.1.0,IEEE8021-PAE-MIB::std,,,,,,
.1.0.8802,IEEE8021-PAE-MIB::iso8802,,,,,,
.1.0.8802.1,IEEE8021-PAE-MIB::ieee802dot1,,,,,,
.1.0.8802.1.1,IEEE8021-PAE-MIB::ieee802dot1mibs,,,,,,
.1.0.8802.1.1.1,IEEE8021-PAE-MIB::ieee8021paeMIB,,,,,,The Port Access Entity module for managing IEEE 802.1X.
.1.0.8802.1.1.1.1,IEEE8021-PAE-MIB::paeMIBObjects,,,,,,
.1.0.8802.1.1.1.1.1,IEEE8021-PAE-MIB::dot1xPaeSystem,,,,,,
.1.0.8802.1.1.1.1.1.1,IEEE8021-PAE-MIB::dot1xPaeSystemAuthControl,INTEGER,read-write,,current,enabled(1):disabled(2),The administrative enable/disable state for Port Access Control in a System.
.1.0.8802.1.1.1.1.1.2,IEEE8021-PAE-MIB::dot1xPaePortTable,,not-accessible,,current,,A table of system level information for each port supported by the Port Access Entity. An entry appears in this table for each port of this system.
.1.0.8802.1.1.1.1.1.2.1,IEEE8021-PAE-MIB::dot1xPaePortEntry,,not-accessible,dot1xPaePortNumber,current,,The Port number, protocol version, and initialization control for a Port.
.1.0.8802.1.1.1.1.1.2.1.1,IEEE8021-PAE-MIB::dot1xPaePortNumber,Integer32,not-accessible,,current,,The Port number associated with this Port.
.1.0.8802.1.1.1.1.1.2.1.2,IEEE8021-PAE-MIB::dot1xPaePortProtocolVersion,Unsigned32,read-only,,current,,The protocol version associated with this Port.
.1.0.8802.1.1.1.1.1.2.1.3,IEEE8021-PAE-MIB::dot1xPaePortCapabilities,BITS,read-only,,current,dot1xPaePortAuthCapable(0):dot1xPaePortSuppCapable(1),Indicates the PAE functionality that this Port supports and that may be managed through this MIB.
.1.0.8802.1.1.1.1.1.2.1.4,IEEE8021-PAE-MIB::dot1xPaePortInitialize,INTEGER,read-write,,current,true(1):false(2),The initialization control for this Port. Setting this attribute TRUE causes the Port to be initialized. The attribute value reverts to FALSE once initialization has completed.
.1.0.8802.1.1.1.1.1.2.1.5,IEEE8021-PAE-MIB::dot1xPaePortReauthenticate,INTEGER,read-write,,current,true(1):false(2),The reauthentication control for this port. Setting this attribute TRUE causes the Authenticator PAE state machine for the Port to reauthenticate the Supplicant. Setting this attribute FALSE has no effect. This attribute always returns FALSE when it is read.
.1.0.8802.1.1.1.1.2,IEEE8021-PAE-MIB::dot1xPaeAuthenticator,,,,,,
.1.0.8802.1.1.1.1.2.1,IEEE8021-PAE-MIB::dot1xAuthConfigTable,,not-accessible,,current,,A table that contains the configuration objects for the Authenticator PAE associated with each port. An entry appears in this table for each port that may authenticate access to itself.
.1.0.8802.1.1.1.1.2.1.1,IEEE8021-PAE-MIB::dot1xAuthConfigEntry,,not-accessible,dot1xPaePortNumber,current,,The configuration information for an Authenticator PAE.
.1.0.8802.1.1.1.1.2.1.1.1,IEEE8021-PAE-MIB::dot1xAuthPaeState,INTEGER,read-only,,current,initialize(1):disconnected(2):connecting(3):authenticating(4):authenticated(5):aborting(6):held(7):forceAuth(8):forceUnauth(9):restart(10),The current value of the Authenticator PAE state machine.
.1.0.8802.1.1.1.1.2.1.1.2,IEEE8021-PAE-MIB::dot1xAuthBackendAuthState,INTEGER,read-only,,current,request(1):response(2):success(3):fail(4):timeout(5):idle(6):initialize(7):ignore(8),The current state of the Backend Authentication state machine.
.1.0.8802.1.1.1.1.2.1.1.3,IEEE8021-PAE-MIB::dot1xAuthAdminControlledDirections,INTEGER,read-write,,current,both(0):in(1),The current value of the administrative controlled directions parameter for the Port.
.1.0.8802.1.1.1.1.2.1.1.4,IEEE8021-PAE-MIB::dot1xAuthOperControlledDirections,INTEGER,read-only,,current,both(0):in(1),The current value of the operational controlled directions parameter for the Port.
.1.0.8802.1.1.1.1.2.1.1.5,IEEE8021-PAE-MIB::dot1xAuthAuthControlledPortStatus,INTEGER,read-only,,current,authorized(1):unauthorized(2),The current value of the controlled Port status parameter for the Port.
.1.0.8802.1.1.1.1.2.1.1.6,IEEE8021-PAE-MIB::dot1xAuthAuthControlledPortControl,INTEGER,read-write,,current,forceUnauthorized(1):auto(2):forceAuthorized(3),The current value of the controlled Port control parameter for the Port.
.1.0.8802.1.1.1.1.2.1.1.7,IEEE8021-PAE-MIB::dot1xAuthQuietPeriod,Unsigned32,read-write,,current,,The value, in seconds, of the quietPeriod constant currently in use by the Authenticator PAE state machine.
.1.0.8802.1.1.1.1.2.1.1.8,IEEE8021-PAE-MIB::dot1xAuthTxPeriod,Unsigned32,read-write,,deprecated,,The value, in seconds, of the txPeriod constant currently in use by the Authenticator PAE state machine.
.1.0.8802.1.1.1.1.2.1.1.9,IEEE8021-PAE-MIB::dot1xAuthSuppTimeout,Unsigned32,read-write,,deprecated,,The value, in seconds, of the suppTimeout constant currently in use by the Backend Authentication state machine.
.1.0.8802.1.1.1.1.2.1.1.10,IEEE8021-PAE-MIB::dot1xAuthServerTimeout,Unsigned32,read-write,,current,,The value, in seconds, of the serverTimeout constant currently in use by the Backend Authentication state machine.
.1.0.8802.1.1.1.1.2.1.1.11,IEEE8021-PAE-MIB::dot1xAuthMaxReq,Unsigned32,read-write,,deprecated,,The value of the maxReq constant currently in use by the Backend Authentication state machine.
.1.0.8802.1.1.1.1.2.1.1.12,IEEE8021-PAE-MIB::dot1xAuthReAuthPeriod,Unsigned32,read-write,,current,,The value, in seconds, of the reAuthPeriod constant currently in use by the Reauthentication Timer state machine.
.1.0.8802.1.1.1.1.2.1.1.13,IEEE8021-PAE-MIB::dot1xAuthReAuthEnabled,INTEGER,read-write,,current,true(1):false(2),The enable/disable control used by the Reauthentication Timer state machine (8.5.5.1).
.1.0.8802.1.1.1.1.2.1.1.14,IEEE8021-PAE-MIB::dot1xAuthKeyTxEnabled,INTEGER,read-write,,current,true(1):false(2),The value of the keyTransmissionEnabled constant currently in use by the Authenticator PAE state machine.
.1.0.8802.1.1.1.1.2.2,IEEE8021-PAE-MIB::dot1xAuthStatsTable,,not-accessible,,current,,A table that contains the statistics objects for the Authenticator PAE associated with each Port. An entry appears in this table for each port that may authenticate access to itself.
.1.0.8802.1.1.1.1.2.2.1,IEEE8021-PAE-MIB::dot1xAuthStatsEntry,,not-accessible,dot1xPaePortNumber,current,,The statistics information for an Authenticator PAE.
.1.0.8802.1.1.1.1.2.2.1.1,IEEE8021-PAE-MIB::dot1xAuthEapolFramesRx,Counter32,read-only,,current,,The number of valid EAPOL frames of any type that have been received by this Authenticator.
.1.0.8802.1.1.1.1.2.2.1.2,IEEE8021-PAE-MIB::dot1xAuthEapolFramesTx,Counter32,read-only,,current,,The number of EAPOL frames of any type that have been transmitted by this Authenticator.
.1.0.8802.1.1.1.1.2.2.1.3,IEEE8021-PAE-MIB::dot1xAuthEapolStartFramesRx,Counter32,read-only,,current,,The number of EAPOL Start frames that have been received by this Authenticator.
.1.0.8802.1.1.1.1.2.2.1.4,IEEE8021-PAE-MIB::dot1xAuthEapolLogoffFramesRx,Counter32,read-only,,current,,The number of EAPOL Logoff frames that have been received by this Authenticator.
.1.0.8802.1.1.1.1.2.2.1.5,IEEE8021-PAE-MIB::dot1xAuthEapolRespIdFramesRx,Counter32,read-only,,current,,The number of EAP Resp/Id frames that have been received by this Authenticator.
.1.0.8802.1.1.1.1.2.2.1.6,IEEE8021-PAE-MIB::dot1xAuthEapolRespFramesRx,Counter32,read-only,,current,,The number of valid EAP Response frames (other than Resp/Id frames) that have been received by this Authenticator.
.1.0.8802.1.1.1.1.2.2.1.7,IEEE8021-PAE-MIB::dot1xAuthEapolReqIdFramesTx,Counter32,read-only,,current,,The number of EAP Req/Id frames that have been transmitted by this Authenticator.
.1.0.8802.1.1.1.1.2.2.1.8,IEEE8021-PAE-MIB::dot1xAuthEapolReqFramesTx,Counter32,read-only,,current,,The number of EAP Request frames (other than Rq/Id frames) that have been transmitted by this Authenticator.
.1.0.8802.1.1.1.1.2.2.1.9,IEEE8021-PAE-MIB::dot1xAuthInvalidEapolFramesRx,Counter32,read-only,,current,,The number of EAPOL frames that have been received by this Authenticator in which the frame type is not recognized.
.1.0.8802.1.1.1.1.2.2.1.10,IEEE8021-PAE-MIB::dot1xAuthEapLengthErrorFramesRx,Counter32,read-only,,current,,The number of EAPOL frames that have been received by this Authenticator in which the Packet Body Length field is invalid.
.1.0.8802.1.1.1.1.2.2.1.11,IEEE8021-PAE-MIB::dot1xAuthLastEapolFrameVersion,Unsigned32,read-only,,current,,The protocol version number carried in the most recently received EAPOL frame.
.1.0.8802.1.1.1.1.2.2.1.12,IEEE8021-PAE-MIB::dot1xAuthLastEapolFrameSource,OCTET,read-only,,current,,The source MAC address carried in the most recently received EAPOL frame.
.1.0.8802.1.1.1.1.2.3,IEEE8021-PAE-MIB::dot1xAuthDiagTable,,not-accessible,,deprecated,,A table that contains the diagnostics objects for the Authenticator PAE associated with each Port. An entry appears in this table for each port that may authenticate access to itself.
.1.0.8802.1.1.1.1.2.3.1,IEEE8021-PAE-MIB::dot1xAuthDiagEntry,,not-accessible,dot1xPaePortNumber,deprecated,,The diagnostics information for an Authenticator PAE.
.1.0.8802.1.1.1.1.2.3.1.1,IEEE8021-PAE-MIB::dot1xAuthEntersConnecting,Counter32,read-only,,deprecated,,Counts the number of times that the state machine transitions to the CONNECTING state from any other state.
.1.0.8802.1.1.1.1.2.3.1.2,IEEE8021-PAE-MIB::dot1xAuthEapLogoffsWhileConnecting,Counter32,read-only,,deprecated,,Counts the number of times that the state machine transitions from CONNECTING to DISCONNECTED as a result of receiving an EAPOL-Logoff message.
.1.0.8802.1.1.1.1.2.3.1.3,IEEE8021-PAE-MIB::dot1xAuthEntersAuthenticating,Counter32,read-only,,deprecated,,Counts the number of times that the state machine transitions from CONNECTING to AUTHENTICATING, as a result of an EAP-Response/Identity message being received from the Supplicant.
.1.0.8802.1.1.1.1.2.3.1.4,IEEE8021-PAE-MIB::dot1xAuthAuthSuccessWhileAuthenticating,Counter32,read-only,,deprecated,,Counts the number of times that the state machine transitions from AUTHENTICATING to AUTHENTICATED, as a result of the Backend Authentication state machine indicating successful authentication of the Supplicant (authSuccess = TRUE).
.1.0.8802.1.1.1.1.2.3.1.5,IEEE8021-PAE-MIB::dot1xAuthAuthTimeoutsWhileAuthenticating,Counter32,read-only,,deprecated,,Counts the number of times that the state machine transitions from AUTHENTICATING to ABORTING, as a result of the Backend Authentication state machine indicating authentication timeout (authTimeout = TRUE).
.1.0.8802.1.1.1.1.2.3.1.6,IEEE8021-PAE-MIB::dot1xAuthAuthFailWhileAuthenticating,Counter32,read-only,,deprecated,,Counts the number of times that the state machine transitions from AUTHENTICATING to HELD, as a result of the Backend Authentication state machine indicating authentication failure (authFail = TRUE).
.1.0.8802.1.1.1.1.2.3.1.7,IEEE8021-PAE-MIB::dot1xAuthAuthReauthsWhileAuthenticating,Counter32,read-only,,deprecated,,Counts the number of times that the state machine transitions from AUTHENTICATING to ABORTING, as a result of a reauthentication request (reAuthenticate = TRUE).
.1.0.8802.1.1.1.1.2.3.1.8,IEEE8021-PAE-MIB::dot1xAuthAuthEapStartsWhileAuthenticating,Counter32,read-only,,deprecated,,Counts the number of times that the state machine transitions from AUTHENTICATING to ABORTING, as a result of an EAPOL-Start message being received from the Supplicant.
.1.0.8802.1.1.1.1.2.3.1.9,IEEE8021-PAE-MIB::dot1xAuthAuthEapLogoffWhileAuthenticating,Counter32,read-only,,deprecated,,Counts the number of times that the state machine transitions from AUTHENTICATING to ABORTING, as a result of an EAPOL-Logoff message being received from the Supplicant.
.1.0.8802.1.1.1.1.2.3.1.10,IEEE8021-PAE-MIB::dot1xAuthAuthReauthsWhileAuthenticated,Counter32,read-only,,deprecated,,Counts the number of times that the state machine transitions from AUTHENTICATED to CONNECTING, as a result of a reauthentication request (reAuthenticate = TRUE).
.1.0.8802.1.1.1.1.2.3.1.11,IEEE8021-PAE-MIB::dot1xAuthAuthEapStartsWhileAuthenticated,Counter32,read-only,,deprecated,,Counts the number of times that the state machine transitions from AUTHENTICATED to CONNECTING, as a result of an EAPOL-Start message being received from the Supplicant.
.1.0.8802.1.1.1.1.2.3.1.12,IEEE8021-PAE-MIB::dot1xAuthAuthEapLogoffWhileAuthenticated,Counter32,read-only,,deprecated,,Counts the number of times that the state machine transitions from AUTHENTICATED to DISCONNECTED, as a result of an EAPOL-Logoff message being received from the Supplicant.
.1.0.8802.1.1.1.1.2.3.1.13,IEEE8021-PAE-MIB::dot1xAuthBackendResponses,Counter32,read-only,,deprecated,,Counts the number of times that the state machine sends an initial Access-Request packet to the Authentication server (i.e., executes sendRespToServer on entry to the RESPONSE state). Indicates that the Authenticator attempted communication with the Authentication Server.
.1.0.8802.1.1.1.1.2.3.1.14,IEEE8021-PAE-MIB::dot1xAuthBackendAccessChallenges,Counter32,read-only,,deprecated,,Counts the number of times that the state machine receives an initial Access-Challenge packet from the Authentication server (i.e., aReq becomes TRUE, causing exit from the RESPONSE state). Indicates that the Authentication Server has communication with the Authenticator.
.1.0.8802.1.1.1.1.2.3.1.15,IEEE8021-PAE-MIB::dot1xAuthBackendOtherRequestsToSupplicant,Counter32,read-only,,deprecated,,Counts the number of times that the state machine sends an EAP-Request packet (other than an Identity, Notification, Failure or Success message) to the Supplicant (i.e., executes txReq on entry to the REQUEST state). Indicates that the Authenticator chose an EAP-method.
.1.0.8802.1.1.1.1.2.3.1.16,IEEE8021-PAE-MIB::dot1xAuthBackendNonNakResponsesFromSupplicant,Counter32,read-only,,deprecated,,Counts the number of times that the state machine receives a response from the Supplicant to an initial EAP-Request, and the response is something other than EAP-NAK (i.e., rxResp becomes TRUE, causing the state machine to transition from REQUEST to RESPONSE, and the response is not an EAP-NAK). Indicates that the Supplicant can respond to the Authenticators chosen EAP-method.
.1.0.8802.1.1.1.1.2.3.1.17,IEEE8021-PAE-MIB::dot1xAuthBackendAuthSuccesses,Counter32,read-only,,deprecated,,Counts the number of times that the state machine receives an EAP-Success message from the Authentication Server (i.e., aSuccess becomes TRUE, causing a transition from RESPONSE to SUCCESS). Indicates that the Supplicant has successfully authenticated to the Authentication Server.
.1.0.8802.1.1.1.1.2.3.1.18,IEEE8021-PAE-MIB::dot1xAuthBackendAuthFails,Counter32,read-only,,deprecated,,Counts the number of times that the state machine receives an EAP-Failure message from the Authentication Server (i.e., aFail becomes TRUE, causing a transition from RESPONSE to FAIL). Indicates that the Supplicant has not authenticated to the Authentication Server.
.1.0.8802.1.1.1.1.2.4,IEEE8021-PAE-MIB::dot1xAuthSessionStatsTable,,not-accessible,,current,,A table that contains the session statistics objects for the Authenticator PAE associated with each Port. An entry appears in this table for each port that may authenticate access to itself.
.1.0.8802.1.1.1.1.2.4.1,IEEE8021-PAE-MIB::dot1xAuthSessionStatsEntry,,not-accessible,dot1xPaePortNumber,current,,The session statistics information for an Authenticator PAE. This shows the current values being collected for each session that is still in progress, or the final values for the last valid session on each port where there is no session currently active.
.1.0.8802.1.1.1.1.2.4.1.1,IEEE8021-PAE-MIB::dot1xAuthSessionOctetsRx,Counter64,read-only,,current,,The number of octets received in user data frames on this Port during the session.
.1.0.8802.1.1.1.1.2.4.1.2,IEEE8021-PAE-MIB::dot1xAuthSessionOctetsTx,Counter64,read-only,,current,,The number of octets transmitted in user data frames on this Port during the session.
.1.0.8802.1.1.1.1.2.4.1.3,IEEE8021-PAE-MIB::dot1xAuthSessionFramesRx,Counter32,read-only,,current,,The number of user data frames received on this Port during the session.
.1.0.8802.1.1.1.1.2.4.1.4,IEEE8021-PAE-MIB::dot1xAuthSessionFramesTx,Counter32,read-only,,current,,The number of user data frames transmitted on this Port during the session.
.1.0.8802.1.1.1.1.2.4.1.5,IEEE8021-PAE-MIB::dot1xAuthSessionId,OCTET,read-only,,current,,A unique identifier for the session, in the form of a printable ASCII string of at least three characters.
.1.0.8802.1.1.1.1.2.4.1.6,IEEE8021-PAE-MIB::dot1xAuthSessionAuthenticMethod,INTEGER,read-only,,current,remoteAuthServer(1):localAuthServer(2),The authentication method used to establish the session.
.1.0.8802.1.1.1.1.2.4.1.7,IEEE8021-PAE-MIB::dot1xAuthSessionTime,TimeTicks,read-only,,current,,The duration of the session in seconds.
.1.0.8802.1.1.1.1.2.4.1.8,IEEE8021-PAE-MIB::dot1xAuthSessionTerminateCause,INTEGER,read-only,,current,supplicantLogoff(1):portFailure(2):supplicantRestart(3):reauthFailed(4):authControlForceUnauth(5):portReInit(6):portAdminDisabled(7):notTerminatedYet(999),The reason for the session termination.
.1.0.8802.1.1.1.1.2.4.1.9,IEEE8021-PAE-MIB::dot1xAuthSessionUserName,OCTET,read-only,,current,,The User-Name representing the identity of the Supplicant PAE.
.1.0.8802.1.1.1.1.3,IEEE8021-PAE-MIB::dot1xPaeSupplicant,,,,,,
.1.0.8802.1.1.1.1.3.1,IEEE8021-PAE-MIB::dot1xSuppConfigTable,,not-accessible,,current,,A table that contains the configuration objects for the Supplicant PAE associated with each port. An entry appears in this table for each port that may authenticate itself when challenged by a remote system.
.1.0.8802.1.1.1.1.3.1.1,IEEE8021-PAE-MIB::dot1xSuppConfigEntry,,not-accessible,dot1xPaePortNumber,current,,The configuration information for a Supplicant PAE.
.1.0.8802.1.1.1.1.3.1.1.1,IEEE8021-PAE-MIB::dot1xSuppPaeState,INTEGER,read-only,,current,disconnected(1):logoff(2):connecting(3):authenticating(4):authenticated(5):acquired(6):held(7):restart(8):sForceAuth(9):sForceUnauth(10),The current state of the Supplicant PAE state machine (8.5.8).
.1.0.8802.1.1.1.1.3.1.1.2,IEEE8021-PAE-MIB::dot1xSuppHeldPeriod,Unsigned32,read-write,,current,,The value, in seconds, of the heldPeriod constant currently in use by the Supplicant PAE state machine (8.5.8.1.2).
.1.0.8802.1.1.1.1.3.1.1.3,IEEE8021-PAE-MIB::dot1xSuppAuthPeriod,Unsigned32,read-write,,current,,The value, in seconds, of the authPeriod constant currently in use by the Supplicant PAE state machine (8.5.8.1.2).
.1.0.8802.1.1.1.1.3.1.1.4,IEEE8021-PAE-MIB::dot1xSuppStartPeriod,Unsigned32,read-write,,current,,The value, in seconds, of the startPeriod constant currently in use by the Supplicant PAE state machine (8.5.8.1.2).
.1.0.8802.1.1.1.1.3.1.1.5,IEEE8021-PAE-MIB::dot1xSuppMaxStart,Unsigned32,read-write,,current,,The value of the maxStart constant currently in use by the Supplicant PAE state machine (8.5.8.1.2).
.1.0.8802.1.1.1.1.3.1.1.6,IEEE8021-PAE-MIB::dot1xSuppControlledPortStatus,INTEGER,read-only,,current,authorized(1):unauthorized(2),The current state of the Supplicant PAE state machine (8.5.8).
.1.0.8802.1.1.1.1.3.1.1.7,IEEE8021-PAE-MIB::dot1xSuppAccessCtrlWithAuth,INTEGER,read-write,,current,inactive(1):active(2),The setting for the application of the Supplicant authorization state when the port is operating as both a Supplicant and an Authenticator. inactive indicates the port will not apply the the Supplicant authorization state, using only the Authenticator authorization  state to restrict access to the port. active indicates the port will apply the the Supplicant authorization state, as well as the Authenticator authorization state.
.1.0.8802.1.1.1.1.3.1.1.8,IEEE8021-PAE-MIB::dot1xSuppBackendState,INTEGER,read-only,,current,initialize(1):idle(2):request(3):response(4):receive(5):fail(6):success(7):timeout(8),The current state of the Supplicant Backend state
.1.0.8802.1.1.1.1.3.2,IEEE8021-PAE-MIB::dot1xSuppStatsTable,,not-accessible,,current,,A table that contains the statistics objects for the Supplicant PAE associated with each port. An entry appears in this table for each port that may authenticate itself when challenged by a remote system.
.1.0.8802.1.1.1.1.3.2.1,IEEE8021-PAE-MIB::dot1xSuppStatsEntry,,not-accessible,dot1xPaePortNumber,current,,The statistics information for a Supplicant PAE.
.1.0.8802.1.1.1.1.3.2.1.1,IEEE8021-PAE-MIB::dot1xSuppEapolFramesRx,Counter32,read-only,,current,,The number of EAPOL frames of any type that have been received by this Supplicant.
.1.0.8802.1.1.1.1.3.2.1.2,IEEE8021-PAE-MIB::dot1xSuppEapolFramesTx,Counter32,read-only,,current,,The number of EAPOL frames of any type that have been transmitted by this Supplicant.
.1.0.8802.1.1.1.1.3.2.1.3,IEEE8021-PAE-MIB::dot1xSuppEapolStartFramesTx,Counter32,read-only,,current,,The number of EAPOL Start frames that have been transmitted by this Supplicant.
.1.0.8802.1.1.1.1.3.2.1.4,IEEE8021-PAE-MIB::dot1xSuppEapolLogoffFramesTx,Counter32,read-only,,current,,The number of EAPOL Logoff frames that have been transmitted by this Supplicant.
.1.0.8802.1.1.1.1.3.2.1.5,IEEE8021-PAE-MIB::dot1xSuppEapolRespIdFramesTx,Counter32,read-only,,deprecated,,The number of EAP Resp/Id frames that have been transmitted by this Supplicant.
.1.0.8802.1.1.1.1.3.2.1.6,IEEE8021-PAE-MIB::dot1xSuppEapolRespFramesTx,Counter32,read-only,,deprecated,,The number of valid EAP Response frames (other than Resp/Id frames) that have been transmitted by this Supplicant.
.1.0.8802.1.1.1.1.3.2.1.7,IEEE8021-PAE-MIB::dot1xSuppEapolReqIdFramesRx,Counter32,read-only,,deprecated,,The number of EAP Req/Id frames that have been received by this Supplicant.
.1.0.8802.1.1.1.1.3.2.1.8,IEEE8021-PAE-MIB::dot1xSuppEapolReqFramesRx,Counter32,read-only,,deprecated,,The number of EAP Request frames (other than Rq/Id frames) that have been received by this Supplicant.
.1.0.8802.1.1.1.1.3.2.1.9,IEEE8021-PAE-MIB::dot1xSuppInvalidEapolFramesRx,Counter32,read-only,,current,,The number of EAPOL frames that have been received by this Supplicant in which the frame type is not recognized.
.1.0.8802.1.1.1.1.3.2.1.10,IEEE8021-PAE-MIB::dot1xSuppEapLengthErrorFramesRx,Counter32,read-only,,current,,The number of EAPOL frames that have been received by this Supplicant in which the Packet Body Length field (7.5.5) is invalid.
.1.0.8802.1.1.1.1.3.2.1.11,IEEE8021-PAE-MIB::dot1xSuppLastEapolFrameVersion,Unsigned32,read-only,,current,,The protocol version number carried in the most recently received EAPOL frame.
.1.0.8802.1.1.1.1.3.2.1.12,IEEE8021-PAE-MIB::dot1xSuppLastEapolFrameSource,OCTET,read-only,,current,,The source MAC address carried in the most recently received EAPOL frame.
.1.0.8802.1.1.1.2,IEEE8021-PAE-MIB::dot1xPaeConformance,,,,,,
.1.0.8802.1.1.1.2.1,IEEE8021-PAE-MIB::dot1xPaeGroups,,,,,,
.1.0.8802.1.1.1.2.1.1,IEEE8021-PAE-MIB::dot1xPaeSystemGroup,,,,,,A collection of objects providing system information about, and control over, a PAE.
.1.0.8802.1.1.1.2.1.2,IEEE8021-PAE-MIB::dot1xPaeAuthConfigGroup,,,,,,A collection of objects providing configuration information about an Authenticator PAE.
.1.0.8802.1.1.1.2.1.3,IEEE8021-PAE-MIB::dot1xPaeAuthStatsGroup,,,,,,A collection of objects providing statistics about an Authenticator PAE.
.1.0.8802.1.1.1.2.1.4,IEEE8021-PAE-MIB::dot1xPaeAuthDiagGroup,,,,,,A collection of objects providing diagnostic statistics about an Authenticator PAE.
.1.0.8802.1.1.1.2.1.5,IEEE8021-PAE-MIB::dot1xPaeAuthSessionStatsGroup,,,,,,A collection of objects providing statistics about the current, or last session for an Authenticator PAE.
.1.0.8802.1.1.1.2.1.6,IEEE8021-PAE-MIB::dot1xPaeSuppConfigGroup,,,,,,A collection of objects providing configuration information about a Supplicant PAE.
.1.0.8802.1.1.1.2.1.7,IEEE8021-PAE-MIB::dot1xPaeSuppStatsGroup,,,,,,A collection of objects providing statistics about a Supplicant PAE.
.1.0.8802.1.1.1.2.1.8,IEEE8021-PAE-MIB::dot1xPaeAuthConfigGroup2,,,,,,A collection of objects providing configuration information about an Authenticator PAE.
.1.0.8802.1.1.1.2.1.9,IEEE8021-PAE-MIB::dot1xPaeSuppConfigGroup2,,,,,,A collection of objects providing configuration information about a Supplicant PAE.
.1.0.8802.1.1.1.2.1.10,IEEE8021-PAE-MIB::dot1xPaeSuppStatsGroup2,,,,,,A collection of objects providing statistics about a Supplicant PAE.
.1.0.8802.1.1.1.2.2,IEEE8021-PAE-MIB::dot1xPaeCompliances,,,,,,
.1.0.8802.1.1.1.2.2.1,IEEE8021-PAE-MIB::dot1xPaeCompliance,,,,,,The compliance statement for device support of Port Access Control.
.1.0.8802.1.1.1.2.2.2,IEEE8021-PAE-MIB::dot1xPaeCompliance2,,,,,,The compliance statement for device support of Port Access Control.
.1.0.8802.1.1.2,LLDP-MIB::lldpMIB,,,,,,Management Information Base module for LLDP configuration, statistics, local system data and remote systems data components. Copyright (C) IEEE (2005). This version of this MIB module is published as subclause 12.1 of IEEE Std 802.1AB-2005; see the standard itself for full legal notices.
.1.0.8802.1.1.2.0,LLDP-MIB::lldpNotifications,,,,,,
.1.0.8802.1.1.2.0.0,LLDP-MIB::lldpNotificationPrefix,,,,,,
.1.0.8802.1.1.2.0.0.1,LLDP-MIB::lldpRemTablesChange,,,,,,A lldpRemTablesChange notification is sent when the value of lldpStatsRemTableLastChangeTime changes. It can be utilized by an NMS to trigger LLDP remote systems table maintenance polls. Note that transmission of lldpRemTablesChange notifications are throttled by the agent, as specified by the 'lldpNotificationInterval' object.
.1.0.8802.1.1.2.1,LLDP-MIB::lldpObjects,,,,,,
.1.0.8802.1.1.2.1.1,LLDP-MIB::lldpConfiguration,,,,,,
.1.0.8802.1.1.2.1.1.1,LLDP-MIB::lldpMessageTxInterval,Integer32,read-write,,current,,The interval at which LLDP frames are transmitted on behalf of this LLDP agent. The default value for lldpMessageTxInterval object is 30 seconds. The value of this object must be restored from non-volatile storage after a re-initialization of the management system.
.1.0.8802.1.1.2.1.1.2,LLDP-MIB::lldpMessageTxHoldMultiplier,Integer32,read-write,,current,,The time-to-live value expressed as a multiple of the lldpMessageTxInterval object. The actual time-to-live value used in LLDP frames, transmitted on behalf of this LLDP agent, can be expressed by the following formula: TTL = min(65535, (lldpMessageTxInterval * lldpMessageTxHoldMultiplier)) For example, if the value of lldpMessageTxInterval is '30', and the value of lldpMessageTxHoldMultiplier is '4', then the value '120' is encoded in the TTL field in the LLDP header. The default value for lldpMessageTxHoldMultiplier object is 4. The value of this object must be restored from non-volatile storage after a re-initialization of the management system.
.1.0.8802.1.1.2.1.1.3,LLDP-MIB::lldpReinitDelay,Integer32,read-write,,current,,The lldpReinitDelay indicates the delay (in units of seconds) from when lldpPortConfigAdminStatus object of a particular port becomes 'disabled' until re-initialization will be attempted. The default value for lldpReintDelay object is two seconds. The value of this object must be restored from non-volatile storage after a re-initialization of the management system.
.1.0.8802.1.1.2.1.1.4,LLDP-MIB::lldpTxDelay,Integer32,read-write,,current,,The lldpTxDelay indicates the delay (in units of seconds) between successive LLDP frame transmissions  initiated by value/status changes in the LLDP local systems MIB. The recommended value for the lldpTxDelay is set by the following formula: 1 <= lldpTxDelay <= (0.25 * lldpMessageTxInterval) The default value for lldpTxDelay object is two seconds. The value of this object must be restored from non-volatile storage after a re-initialization of the management system.
.1.0.8802.1.1.2.1.1.5,LLDP-MIB::lldpNotificationInterval,Integer32,read-write,,current,,This object controls the transmission of LLDP notifications. the agent must not generate more than one lldpRemTablesChange notification-event in the indicated period, where a 'notification-event' is the transmission of a single notification PDU type to a list of notification destinations. If additional changes in lldpRemoteSystemsData object groups occur within the indicated throttling period, then these trap- events must be suppressed by the agent. An NMS should periodically check the value of lldpStatsRemTableLastChangeTime to detect any missed lldpRemTablesChange notification-events, e.g. due to throttling or transmission loss. If notification transmission is enabled for particular ports, the suggested default throttling period is 5 seconds. The value of this object must be restored from non-volatile storage after a re-initialization of the management system.
.1.0.8802.1.1.2.1.1.6,LLDP-MIB::lldpPortConfigTable,,not-accessible,,current,,The table that controls LLDP frame transmission on individual ports.
.1.0.8802.1.1.2.1.1.6.1,LLDP-MIB::lldpPortConfigEntry,,not-accessible,lldpPortConfigPortNum,current,,LLDP configuration information for a particular port. This configuration parameter controls the transmission and the reception of LLDP frames on those ports whose rows are created in this table.
.1.0.8802.1.1.2.1.1.6.1.1,LLDP-MIB::lldpPortConfigPortNum,Integer32,not-accessible,,current,,The index value used to identify the port component (contained in the local chassis with the LLDP agent) associated with this entry. The value of this object is used as a port index to the lldpPortConfigTable.
.1.0.8802.1.1.2.1.1.6.1.2,LLDP-MIB::lldpPortConfigAdminStatus,INTEGER,read-write,,current,txOnly(1):rxOnly(2):txAndRx(3):disabled(4),The administratively desired status of the local LLDP agent. If the associated lldpPortConfigAdminStatus object has a value of 'txOnly(1)', then LLDP agent will transmit LLDP frames on this port and it will not store any information about the remote systems connected.  If the associated lldpPortConfigAdminStatus object has a value of 'rxOnly(2)', then the LLDP agent will receive, but it will not transmit LLDP frames on this port. If the associated lldpPortConfigAdminStatus object has a value of 'txAndRx(3)', then the LLDP agent will transmit and receive LLDP frames on this port. If the associated lldpPortConfigAdminStatus object has a value of 'disabled(4)', then LLDP agent will not transmit or receive LLDP frames on this port. If there is remote systems information which is received on this port and stored in other tables, before the port's lldpPortConfigAdminStatus becomes disabled, then the information will naturally age out.
.1.0.8802.1.1.2.1.1.6.1.3,LLDP-MIB::lldpPortConfigNotificationEnable,INTEGER,read-write,,current,true(1):false(2),The lldpPortConfigNotificationEnable controls, on a per port basis, whether or not notifications from the agent are enabled. The value true(1) means that notifications are enabled; the value false(2) means that they are not.
.1.0.8802.1.1.2.1.1.6.1.4,LLDP-MIB::lldpPortConfigTLVsTxEnable,BITS,read-write,,current,portDesc(0):sysName(1):sysDesc(2):sysCap(3),The lldpPortConfigTLVsTxEnable, defined as a bitmap, includes the basic set of LLDP TLVs whose transmission is allowed on the local LLDP agent by the network management. Each bit in the bitmap corresponds to a TLV type associated with a specific optional TLV. It should be noted that the organizationally-specific TLVs are excluded from the lldpTLVsTxEnable bitmap.  LLDP Organization Specific Information Extension MIBs should have similar configuration object to control transmission of their organizationally defined TLVs. The bit 'portDesc(0)' indicates that LLDP agent should transmit 'Port Description TLV'. The bit 'sysName(1)' indicates that LLDP agent should transmit 'System Name TLV'. The bit 'sysDesc(2)' indicates that LLDP agent should transmit 'System Description TLV'. The bit 'sysCap(3)' indicates that LLDP agent should transmit 'System Capabilities TLV'. There is no bit reserved for the management address TLV type since transmission of management address TLVs are controlled by another object, lldpConfigManAddrTable. The default value for lldpPortConfigTLVsTxEnable object is empty set, which means no enumerated values are set. The value of this object must be restored from non-volatile storage after a re-initialization of the management system.
.1.0.8802.1.1.2.1.1.7,LLDP-MIB::lldpConfigManAddrTable,,not-accessible,,current,,The table that controls selection of LLDP management address TLV instances to be transmitted on individual ports.
.1.0.8802.1.1.2.1.1.7.1,LLDP-MIB::lldpConfigManAddrEntry,,not-accessible,,current,,LLDP configuration information that specifies the set of ports (represented as a PortList) on which the local system management address instance will be transmitted. This configuration object augments the lldpLocManAddrEntry, therefore it is only present along with the management address instance contained in the associated lldpLocManAddrEntry entry. Each active lldpConfigManAddrEntry must be restored from non-volatile and re-created (along with the corresponding lldpLocManAddrEntry) after a re-initialization of the management system.
.1.0.8802.1.1.2.1.1.7.1.1,LLDP-MIB::lldpConfigManAddrPortsTxEnable,OCTET,read-write,,current,,A set of ports that are identified by a PortList, in which each port is represented as a bit. The corresponding local system management address instance will be transmitted on the member ports of the lldpManAddrPortsTxEnable.  The default value for lldpConfigManAddrPortsTxEnable object is empty binary string, which means no ports are specified for advertising indicated management address instance.
.1.0.8802.1.1.2.1.2,LLDP-MIB::lldpStatistics,,,,,,
.1.0.8802.1.1.2.1.2.1,LLDP-MIB::lldpStatsRemTablesLastChangeTime,TimeTicks,read-only,,current,,The value of sysUpTime object (defined in IETF RFC 3418) at the time an entry is created, modified, or deleted in the in tables associated with the lldpRemoteSystemsData objects and all LLDP extension objects associated with remote systems. An NMS can use this object to reduce polling of the lldpRemoteSystemsData objects.
.1.0.8802.1.1.2.1.2.2,LLDP-MIB::lldpStatsRemTablesInserts,Gauge32,read-only,,current,,The number of times the complete set of information advertised by a particular MSAP has been inserted into tables contained in lldpRemoteSystemsData and lldpExtensions objects. The complete set of information received from a particular MSAP should be inserted into related tables. If partial information cannot be inserted for a reason such as lack of resources, all of the complete set of information should be removed. This counter should be incremented only once after the complete set of information is successfully recorded in all related tables. Any failures during inserting information set which result in deletion of previously inserted information should not trigger any changes in lldpStatsRemTablesInserts since the insert is not completed yet or or in lldpStatsRemTablesDeletes, since the deletion would only be a partial deletion. If the failure was the result of lack of resources, the lldpStatsRemTablesDrops counter should be incremented once.
.1.0.8802.1.1.2.1.2.3,LLDP-MIB::lldpStatsRemTablesDeletes,Gauge32,read-only,,current,,The number of times the complete set of information advertised by a particular MSAP has been deleted from tables contained in lldpRemoteSystemsData and lldpExtensions objects. This counter should be incremented only once when the complete set of information is completely deleted from all related tables. Partial deletions, such as deletion of rows associated with a particular MSAP from some tables, but not from all tables are not allowed, thus should not change the value of this counter.
.1.0.8802.1.1.2.1.2.4,LLDP-MIB::lldpStatsRemTablesDrops,Gauge32,read-only,,current,,The number of times the complete set of information advertised by a particular MSAP could not be entered into tables contained in lldpRemoteSystemsData and lldpExtensions objects because of insufficient resources.
.1.0.8802.1.1.2.1.2.5,LLDP-MIB::lldpStatsRemTablesAgeouts,Gauge32,read-only,,current,,The number of times the complete set of information advertised by a particular MSAP has been deleted from tables contained in lldpRemoteSystemsData and lldpExtensions objects because the information timeliness interval has expired. This counter should be incremented only once when the complete set of information is completely invalidated (aged out) from all related tables. Partial aging, similar to deletion case, is not allowed, and thus, should not change the value of this counter.
.1.0.8802.1.1.2.1.2.6,LLDP-MIB::lldpStatsTxPortTable,,not-accessible,,current,,A table containing LLDP transmission statistics for individual ports. Entries are not required to exist in this table while the lldpPortConfigEntry object is equal to 'disabled(4)'.
.1.0.8802.1.1.2.1.2.6.1,LLDP-MIB::lldpStatsTxPortEntry,,not-accessible,lldpStatsTxPortNum,current,,LLDP frame transmission statistics for a particular port.  The port must be contained in the same chassis as the LLDP agent.  All counter values in a particular entry shall be maintained on a continuing basis and shall not be deleted upon expiration of rxInfoTTL timing counters in the LLDP remote systems MIB of the receipt of a shutdown frame from a remote LLDP agent. All statistical counters associated with a particular port on the local LLDP agent become frozen whenever the adminStatus is disabled for the same port.
.1.0.8802.1.1.2.1.2.6.1.1,LLDP-MIB::lldpStatsTxPortNum,Integer32,not-accessible,,current,,The index value used to identify the port component (contained in the local chassis with the LLDP agent) associated with this entry. The value of this object is used as a port index to the lldpStatsTable.
.1.0.8802.1.1.2.1.2.6.1.2,LLDP-MIB::lldpStatsTxPortFramesTotal,Counter32,read-only,,current,,The number of LLDP frames transmitted by this LLDP agent on the indicated port.
.1.0.8802.1.1.2.1.2.7,LLDP-MIB::lldpStatsRxPortTable,,not-accessible,,current,,A table containing LLDP reception statistics for individual ports. Entries are not required to exist in this table while the lldpPortConfigEntry object is equal to 'disabled(4)'.
.1.0.8802.1.1.2.1.2.7.1,LLDP-MIB::lldpStatsRxPortEntry,,not-accessible,lldpStatsRxPortNum,current,,LLDP frame reception statistics for a particular port. The port must be contained in the same chassis as the LLDP agent.  All counter values in a particular entry shall be maintained on a continuing basis and shall not be deleted upon expiration of rxInfoTTL timing counters in the LLDP remote systems MIB of the receipt of a shutdown frame from a remote LLDP agent. All statistical counters associated with a particular port on the local LLDP agent become frozen whenever the adminStatus is disabled for the same port.
.1.0.8802.1.1.2.1.2.7.1.1,LLDP-MIB::lldpStatsRxPortNum,Integer32,not-accessible,,current,,The index value used to identify the port component (contained in the local chassis with the LLDP agent) associated with this entry. The value of this object is used as a port index to the lldpStatsTable.
.1.0.8802.1.1.2.1.2.7.1.2,LLDP-MIB::lldpStatsRxPortFramesDiscardedTotal,Counter32,read-only,,current,,The number of LLDP frames received by this LLDP agent on the indicated port, and then discarded for any reason. This counter can provide an indication that LLDP header formating problems may exist with the local LLDP agent in the sending system or that LLDPDU validation problems may exist with the local LLDP agent in the receiving system.
.1.0.8802.1.1.2.1.2.7.1.3,LLDP-MIB::lldpStatsRxPortFramesErrors,Counter32,read-only,,current,,The number of invalid LLDP frames received by this LLDP agent on the indicated port, while this LLDP agent is enabled.
.1.0.8802.1.1.2.1.2.7.1.4,LLDP-MIB::lldpStatsRxPortFramesTotal,Counter32,read-only,,current,,The number of valid LLDP frames received by this LLDP agent on the indicated port, while this LLDP agent is enabled.
.1.0.8802.1.1.2.1.2.7.1.5,LLDP-MIB::lldpStatsRxPortTLVsDiscardedTotal,Counter32,read-only,,current,,The number of LLDP TLVs discarded for any reason by this LLDP agent on the indicated port.
.1.0.8802.1.1.2.1.2.7.1.6,LLDP-MIB::lldpStatsRxPortTLVsUnrecognizedTotal,Counter32,read-only,,current,,The number of LLDP TLVs received on the given port that are not recognized by this LLDP agent on the indicated port.  An unrecognized TLV is referred to as the TLV whose type value is in the range of reserved TLV types (000 1001 - 111 1110) in Table 9.1 of IEEE Std 802.1AB-2005. An unrecognized TLV may be a basic management TLV from a later LLDP version.
.1.0.8802.1.1.2.1.2.7.1.7,LLDP-MIB::lldpStatsRxPortAgeoutsTotal,Gauge32,read-only,,current,,The counter that represents the number of age-outs that occurred on a given port. An age-out is the number of times the complete set of information advertised by a particular MSAP has been deleted from tables contained in lldpRemoteSystemsData and lldpExtensions objects because the information timeliness interval has expired. This counter is similar to lldpStatsRemTablesAgeouts, except that the counter is on a per port basis. This enables NMS to poll tables associated with the lldpRemoteSystemsData objects and all LLDP extension objects associated with remote systems on the indicated port only. This counter should be set to zero during agent initialization and its value should not be saved in non-volatile storage. When a port's admin status changes from 'disabled' to 'rxOnly', 'txOnly' or 'txAndRx', the counter associated with the same port should reset to 0. The agent should also flush all remote system information associated with the same port. This counter should be incremented only once when the complete set of information is invalidated (aged out) from all related tables on a particular port. Partial aging is not allowed, and thus, should not change the value of this counter.
.1.0.8802.1.1.2.1.3,LLDP-MIB::lldpLocalSystemData,,,,,,
.1.0.8802.1.1.2.1.3.1,LLDP-MIB::lldpLocChassisIdSubtype,INTEGER,read-only,,current,chassisComponent(1):interfaceAlias(2):portComponent(3):macAddress(4):networkAddress(5):interfaceName(6):local(7),The type of encoding used to identify the chassis associated with the local system.
.1.0.8802.1.1.2.1.3.2,LLDP-MIB::lldpLocChassisId,OCTET,read-only,,current,,The string value used to identify the chassis component associated with the local system.
.1.0.8802.1.1.2.1.3.3,LLDP-MIB::lldpLocSysName,OCTET,read-only,,current,,The string value used to identify the system name of the local system. If the local agent supports IETF RFC 3418, lldpLocSysName object should have the same value of sysName object.
.1.0.8802.1.1.2.1.3.4,LLDP-MIB::lldpLocSysDesc,OCTET,read-only,,current,,The string value used to identify the system description of the local system. If the local agent supports IETF RFC 3418, lldpLocSysDesc object should have the same value of sysDesc object.
.1.0.8802.1.1.2.1.3.5,LLDP-MIB::lldpLocSysCapSupported,BITS,read-only,,current,other(0):repeater(1):bridge(2):wlanAccessPoint(3):router(4):telephone(5):docsisCableDevice(6):stationOnly(7),The bitmap value used to identify which system capabilities are supported on the local system.
.1.0.8802.1.1.2.1.3.6,LLDP-MIB::lldpLocSysCapEnabled,BITS,read-only,,current,other(0):repeater(1):bridge(2):wlanAccessPoint(3):router(4):telephone(5):docsisCableDevice(6):stationOnly(7),The bitmap value used to identify which system capabilities are enabled on the local system.
.1.0.8802.1.1.2.1.3.7,LLDP-MIB::lldpLocPortTable,,not-accessible,,current,,This table contains one or more rows per port information associated with the local system known to this agent.
.1.0.8802.1.1.2.1.3.7.1,LLDP-MIB::lldpLocPortEntry,,not-accessible,lldpLocPortNum,current,,Information about a particular port component. Entries may be created and deleted in this table by the agent.
.1.0.8802.1.1.2.1.3.7.1.1,LLDP-MIB::lldpLocPortNum,Integer32,not-accessible,,current,,The index value used to identify the port component (contained in the local chassis with the LLDP agent) associated with this entry.  The value of this object is used as a port index to the lldpLocPortTable.
.1.0.8802.1.1.2.1.3.7.1.2,LLDP-MIB::lldpLocPortIdSubtype,INTEGER,read-only,,current,interfaceAlias(1):portComponent(2):macAddress(3):networkAddress(4):interfaceName(5):agentCircuitId(6):local(7),The type of port identifier encoding used in the associated 'lldpLocPortId' object.
.1.0.8802.1.1.2.1.3.7.1.3,LLDP-MIB::lldpLocPortId,OCTET,read-only,,current,,The string value used to identify the port component associated with a given port in the local system.
.1.0.8802.1.1.2.1.3.7.1.4,LLDP-MIB::lldpLocPortDesc,OCTET,read-only,,current,,The string value used to identify the 802 LAN station's port description associated with the local system. If the local agent supports IETF RFC 2863, lldpLocPortDesc object should have the same value of ifDescr object.
.1.0.8802.1.1.2.1.3.8,LLDP-MIB::lldpLocManAddrTable,,not-accessible,,current,,This table contains management address information on the local system known to this agent.
.1.0.8802.1.1.2.1.3.8.1,LLDP-MIB::lldpLocManAddrEntry,,not-accessible,lldpLocManAddrSubtype:lldpLocManAddr,current,,Management address information about a particular chassis component. There may be multiple management addresses configured on the system identified by a particular lldpLocChassisId. Each management address should have distinct 'management address type' (lldpLocManAddrSubtype) and 'management address' (lldpLocManAddr.) Entries may be created and deleted in this table by the agent.
.1.0.8802.1.1.2.1.3.8.1.1,LLDP-MIB::lldpLocManAddrSubtype,INTEGER,not-accessible,,current,other(0):ipV4(1):ipV6(2):nsap(3):hdlc(4):bbn1822(5):all802(6):e163(7):e164(8):f69(9):x121(10):ipx(11):appleTalk(12):decnetIV(13):banyanVines(14):e164withNsap(15):dns(16):distinguishedName(17):asNumber(18):xtpOverIpv4(19):xtpOverIpv6(20):xtpNativeModeXTP(21):fibreChannelWWPN(22):fibreChannelWWNN(23):gwid(24):afi(25):mplsTpSectionEndpointIdentifier(26):mplsTpLspEndpointIdentifier(27):mplsTpPseudowireEndpointIdentifier(28):eigrpCommonServiceFamily(16384):eigrpIpv4ServiceFamily(16385):eigrpIpv6ServiceFamily(16386):lispCanonicalAddressFormat(16387):bgpLs(16388):fortyeightBitMac(16389):sixtyfourBitMac(16390):oui(16391):mac24(16392):mac40(16393):ipv664(16394):rBridgePortID(16395):trillNickname(16396):reserved(65535),The type of management address identifier encoding used in the associated 'lldpLocManagmentAddr' object.
.1.0.8802.1.1.2.1.3.8.1.2,LLDP-MIB::lldpLocManAddr,OCTET,not-accessible,,current,,The string value used to identify the management address component associated with the local system. The purpose of this address is to contact the management entity.
.1.0.8802.1.1.2.1.3.8.1.3,LLDP-MIB::lldpLocManAddrLen,Integer32,read-only,,current,,The total length of the management address subtype and the management address fields in LLDPDUs transmitted by the local LLDP agent. The management address length field is needed so that the receiving systems that do not implement SNMP will not be required to implement an iana family numbers/address length equivalency table in order to decode the management adress.
.1.0.8802.1.1.2.1.3.8.1.4,LLDP-MIB::lldpLocManAddrIfSubtype,INTEGER,read-only,,current,unknown(1):ifIndex(2):systemPortNumber(3),The enumeration value that identifies the interface numbering method used for defining the interface number, associated with the local system.
.1.0.8802.1.1.2.1.3.8.1.5,LLDP-MIB::lldpLocManAddrIfId,Integer32,read-only,,current,,The integer value used to identify the interface number regarding the management address component associated with the local system.
.1.0.8802.1.1.2.1.3.8.1.6,LLDP-MIB::lldpLocManAddrOID,OBJECT,read-only,,current,,The OID value used to identify the type of hardware component or protocol entity associated with the management address advertised by the local system agent.
.1.0.8802.1.1.2.1.4,LLDP-MIB::lldpRemoteSystemsData,,,,,,
.1.0.8802.1.1.2.1.4.1,LLDP-MIB::lldpRemTable,,not-accessible,,current,,This table contains one or more rows per physical network connection known to this agent. The agent may wish to ensure that only one lldpRemEntry is present for each local port, or it may choose to maintain multiple lldpRemEntries for the same local port. The following procedure may be used to retrieve remote systems information updates from an LLDP agent: 1. NMS polls all tables associated with remote systems and keeps a local copy of the information retrieved. NMS polls periodically the values of the following objects: a. lldpStatsRemTablesInserts b. lldpStatsRemTablesDeletes c. lldpStatsRemTablesDrops d. lldpStatsRemTablesAgeouts e. lldpStatsRxPortAgeoutsTotal for all ports. 2. LLDP agent updates remote systems MIB objects, and sends out notifications to a list of notification destinations. 3. NMS receives the notifications and compares the new values of objects listed in step 1.  Periodically, NMS should poll the object lldpStatsRemTablesLastChangeTime to find out if anything has changed since the last poll. if something has changed, NMS will poll the objects listed in step 1 to figure out what kind of changes occurred in the tables. if value of lldpStatsRemTablesInserts has changed, then NMS will walk all tables by employing TimeFilter with the last-polled time value. This request will return new objects or objects whose values are updated since the last poll. if value of lldpStatsRemTablesAgeouts has changed, then NMS will walk the lldpStatsRxPortAgeoutsTotal and compare the new values with previously recorded ones. For ports whose lldpStatsRxPortAgeoutsTotal value is greater than the recorded value, NMS will have to retrieve objects associated with those ports from table(s) without employing a TimeFilter (which is performed by specifying 0 for the TimeFilter.) lldpStatsRemTablesDeletes and lldpStatsRemTablesDrops objects are provided for informational purposes.
.1.0.8802.1.1.2.1.4.1.1,LLDP-MIB::lldpRemEntry,,not-accessible,lldpRemTimeMark:lldpRemLocalPortNum:lldpRemIndex,current,,Information about a particular physical network connection. Entries may be created and deleted in this table by the agent, if a physical topology discovery process is active.
.1.0.8802.1.1.2.1.4.1.1.1,LLDP-MIB::lldpRemTimeMark,TimeTicks,not-accessible,,current,,A TimeFilter for this entry. See the TimeFilter textual convention in IETF RFC 2021 and  http://www.ietf.org/IESG/Implementations/RFC2021-Implementation.txt to see how TimeFilter works.
.1.0.8802.1.1.2.1.4.1.1.2,LLDP-MIB::lldpRemLocalPortNum,Integer32,not-accessible,,current,,The index value used to identify the port component (contained in the local chassis with the LLDP agent) associated with this entry. The lldpRemLocalPortNum identifies the port on which the remote system information is received. The value of this object is used as a port index to the lldpRemTable.
.1.0.8802.1.1.2.1.4.1.1.3,LLDP-MIB::lldpRemIndex,Integer32,not-accessible,,current,,This object represents an arbitrary local integer value used by this agent to identify a particular connection instance, unique only for the indicated remote system. An agent is encouraged to assign monotonically increasing index values to new entries, starting with one, after each reboot. It is considered unlikely that the lldpRemIndex will wrap between reboots.
.1.0.8802.1.1.2.1.4.1.1.4,LLDP-MIB::lldpRemChassisIdSubtype,INTEGER,read-only,,current,chassisComponent(1):interfaceAlias(2):portComponent(3):macAddress(4):networkAddress(5):interfaceName(6):local(7),The type of encoding used to identify the chassis associated with the remote system.
.1.0.8802.1.1.2.1.4.1.1.5,LLDP-MIB::lldpRemChassisId,OCTET,read-only,,current,,The string value used to identify the chassis component associated with the remote system.
.1.0.8802.1.1.2.1.4.1.1.6,LLDP-MIB::lldpRemPortIdSubtype,INTEGER,read-only,,current,interfaceAlias(1):portComponent(2):macAddress(3):networkAddress(4):interfaceName(5):agentCircuitId(6):local(7),The type of port identifier encoding used in the associated 'lldpRemPortId' object.
.1.0.8802.1.1.2.1.4.1.1.7,LLDP-MIB::lldpRemPortId,OCTET,read-only,,current,,The string value used to identify the port component associated with the remote system.
.1.0.8802.1.1.2.1.4.1.1.8,LLDP-MIB::lldpRemPortDesc,OCTET,read-only,,current,,The string value used to identify the description of the given port associated with the remote system.
.1.0.8802.1.1.2.1.4.1.1.9,LLDP-MIB::lldpRemSysName,OCTET,read-only,,current,,The string value used to identify the system name of the remote system.
.1.0.8802.1.1.2.1.4.1.1.10,LLDP-MIB::lldpRemSysDesc,OCTET,read-only,,current,,The string value used to identify the system description of the remote system.
.1.0.8802.1.1.2.1.4.1.1.11,LLDP-MIB::lldpRemSysCapSupported,BITS,read-only,,current,other(0):repeater(1):bridge(2):wlanAccessPoint(3):router(4):telephone(5):docsisCableDevice(6):stationOnly(7),The bitmap value used to identify which system capabilities are supported on the remote system.
.1.0.8802.1.1.2.1.4.1.1.12,LLDP-MIB::lldpRemSysCapEnabled,BITS,read-only,,current,other(0):repeater(1):bridge(2):wlanAccessPoint(3):router(4):telephone(5):docsisCableDevice(6):stationOnly(7),The bitmap value used to identify which system capabilities are enabled on the remote system.
.1.0.8802.1.1.2.1.4.2,LLDP-MIB::lldpRemManAddrTable,,not-accessible,,current,,This table contains one or more rows per management address information on the remote system learned on a particular port contained in the local chassis known to this agent.
.1.0.8802.1.1.2.1.4.2.1,LLDP-MIB::lldpRemManAddrEntry,,not-accessible,lldpRemTimeMark:lldpRemLocalPortNum:lldpRemIndex:lldpRemManAddrSubtype:lldpRemManAddr,current,,Management address information about a particular chassis component. There may be multiple management addresses configured on the remote system identified by a particular lldpRemIndex whose information is received on lldpRemLocalPortNum of the local system. Each management address should have distinct 'management address type' (lldpRemManAddrSubtype) and 'management address' (lldpRemManAddr.) Entries may be created and deleted in this table by the agent.
.1.0.8802.1.1.2.1.4.2.1.1,LLDP-MIB::lldpRemManAddrSubtype,INTEGER,not-accessible,,current,other(0):ipV4(1):ipV6(2):nsap(3):hdlc(4):bbn1822(5):all802(6):e163(7):e164(8):f69(9):x121(10):ipx(11):appleTalk(12):decnetIV(13):banyanVines(14):e164withNsap(15):dns(16):distinguishedName(17):asNumber(18):xtpOverIpv4(19):xtpOverIpv6(20):xtpNativeModeXTP(21):fibreChannelWWPN(22):fibreChannelWWNN(23):gwid(24):afi(25):mplsTpSectionEndpointIdentifier(26):mplsTpLspEndpointIdentifier(27):mplsTpPseudowireEndpointIdentifier(28):eigrpCommonServiceFamily(16384):eigrpIpv4ServiceFamily(16385):eigrpIpv6ServiceFamily(16386):lispCanonicalAddressFormat(16387):bgpLs(16388):fortyeightBitMac(16389):sixtyfourBitMac(16390):oui(16391):mac24(16392):mac40(16393):ipv664(16394):rBridgePortID(16395):trillNickname(16396):reserved(65535),The type of management address identifier encoding used in the associated 'lldpRemManagmentAddr' object.
.1.0.8802.1.1.2.1.4.2.1.2,LLDP-MIB::lldpRemManAddr,OCTET,not-accessible,,current,,The string value used to identify the management address component associated with the remote system. The purpose of this address is to contact the management entity.
.1.0.8802.1.1.2.1.4.2.1.3,LLDP-MIB::lldpRemManAddrIfSubtype,INTEGER,read-only,,current,unknown(1):ifIndex(2):systemPortNumber(3),The enumeration value that identifies the interface numbering method used for defining the interface number, associated with the remote system.
.1.0.8802.1.1.2.1.4.2.1.4,LLDP-MIB::lldpRemManAddrIfId,Integer32,read-only,,current,,The integer value used to identify the interface number regarding the management address component associated with the remote system.
.1.0.8802.1.1.2.1.4.2.1.5,LLDP-MIB::lldpRemManAddrOID,OBJECT,read-only,,current,,The OID value used to identify the type of hardware component or protocol entity associated with the management address advertised by the remote system agent.
.1.0.8802.1.1.2.1.4.3,LLDP-MIB::lldpRemUnknownTLVTable,,not-accessible,,current,,This table contains information about an incoming TLV which is not recognized by the receiving LLDP agent. The TLV may be from a later version of the basic management set. This table should only contain TLVs that are found in a single LLDP frame. Entries in this table, associated with an MAC service access point (MSAP, the access point for MAC services provided to the LCC sublayer, defined in IEEE 100, which is also identified with a particular lldpRemLocalPortNum, lldpRemIndex pair) are overwritten with most recently received unrecognized TLV from the same MSAP, or they will naturally age out when the rxInfoTTL timer (associated with the MSAP) expires.
.1.0.8802.1.1.2.1.4.3.1,LLDP-MIB::lldpRemUnknownTLVEntry,,not-accessible,lldpRemTimeMark:lldpRemLocalPortNum:lldpRemIndex:lldpRemUnknownTLVType,current,,Information about an unrecognized TLV received from a physical network connection. Entries may be created and deleted in this table by the agent, if a physical topology discovery process is active.
.1.0.8802.1.1.2.1.4.3.1.1,LLDP-MIB::lldpRemUnknownTLVType,Integer32,not-accessible,,current,,This object represents the value extracted from the type field of the TLV.
.1.0.8802.1.1.2.1.4.3.1.2,LLDP-MIB::lldpRemUnknownTLVInfo,OCTET,read-only,,current,,This object represents the value extracted from the value field of the TLV.
.1.0.8802.1.1.2.1.4.4,LLDP-MIB::lldpRemOrgDefInfoTable,,not-accessible,,current,,This table contains one or more rows per physical network connection which advertises the organizationally defined information. Note that this table contains one or more rows of organizationally defined information that is not recognized by the local agent. If the local system is capable of recognizing any organizationally defined information, appropriate extension MIBs from the organization should be used for information retrieval.
.1.0.8802.1.1.2.1.4.4.1,LLDP-MIB::lldpRemOrgDefInfoEntry,,not-accessible,lldpRemTimeMark:lldpRemLocalPortNum:lldpRemIndex:lldpRemOrgDefInfoOUI:lldpRemOrgDefInfoSubtype:lldpRemOrgDefInfoIndex,current,,Information about the unrecognized organizationally defined information advertised by the remote system. The lldpRemTimeMark, lldpRemLocalPortNum, lldpRemIndex, lldpRemOrgDefInfoOUI, lldpRemOrgDefInfoSubtype, and lldpRemOrgDefInfoIndex are indexes to this table. If there is an lldpRemOrgDefInfoEntry associated with a particular remote system identified by the lldpRemLocalPortNum and lldpRemIndex, there must be an lldpRemEntry associated with the same instance (i.e, using same indexes.) When the lldpRemEntry for the same index is removed from the lldpRemTable, the associated lldpRemOrgDefInfoEntry should be removed from the lldpRemOrgDefInfoTable. Entries may be created and deleted in this table by the agent.
.1.0.8802.1.1.2.1.4.4.1.1,LLDP-MIB::lldpRemOrgDefInfoOUI,OCTET,not-accessible,,current,,The Organizationally Unique Identifier (OUI), as defined in IEEE std 802-2001, is a 24 bit (three octets) globally unique assigned number referenced by various standards, of the information received from the remote system.
.1.0.8802.1.1.2.1.4.4.1.2,LLDP-MIB::lldpRemOrgDefInfoSubtype,Integer32,not-accessible,,current,,The integer value used to identify the subtype of the organizationally defined information received from the remote system. The subtype value is required to identify different instances of organizationally defined information that could not be retrieved without a unique identifier that indicates the particular type of information contained in the information string.
.1.0.8802.1.1.2.1.4.4.1.3,LLDP-MIB::lldpRemOrgDefInfoIndex,Integer32,not-accessible,,current,,This object represents an arbitrary local integer value used by this agent to identify a particular unrecognized organizationally defined information instance, unique only for the lldpRemOrgDefInfoOUI and lldpRemOrgDefInfoSubtype from the same remote system. An agent is encouraged to assign monotonically increasing index values to new entries, starting with one, after each reboot. It is considered unlikely that the lldpRemOrgDefInfoIndex will wrap between reboots.
.1.0.8802.1.1.2.1.4.4.1.4,LLDP-MIB::lldpRemOrgDefInfo,OCTET,read-only,,current,,The string value used to identify the organizationally defined information of the remote system. The encoding for this object should be as defined for SnmpAdminString TC.
.1.0.8802.1.1.2.1.5,LLDP-MIB::lldpExtensions,,,,,,
.1.0.8802.1.1.2.2,LLDP-MIB::lldpConformance,,,,,,
.1.0.8802.1.1.2.2.1,LLDP-MIB::lldpCompliances,,,,,,
.1.0.8802.1.1.2.2.1.1,LLDP-MIB::lldpCompliance,,,,,,The compliance statement for SNMP entities which implement the LLDP MIB.
.1.0.8802.1.1.2.2.2,LLDP-MIB::lldpGroups,,,,,,
.1.0.8802.1.1.2.2.2.1,LLDP-MIB::lldpConfigGroup,,,,,,The collection of objects which are used to configure the LLDP implementation behavior. This group is mandatory for agents which implement the LLDP.
.1.0.8802.1.1.2.2.2.2,LLDP-MIB::lldpConfigRxGroup,,,,,,The collection of objects which are used to configure the LLDP implementation behavior. This group is mandatory for agents which implement the LLDP and have the capability of receiving LLDP frames.
.1.0.8802.1.1.2.2.2.3,LLDP-MIB::lldpConfigTxGroup,,,,,,The collection of objects which are used to configure the LLDP implementation behavior. This group is mandatory for agents which implement the LLDP and have the capability of transmitting LLDP frames.
.1.0.8802.1.1.2.2.2.4,LLDP-MIB::lldpStatsRxGroup,,,,,,The collection of objects which are used to represent LLDP reception statistics. This group is mandatory for agents which implement the LLDP and have the capability of receiving LLDP frames.
.1.0.8802.1.1.2.2.2.5,LLDP-MIB::lldpStatsTxGroup,,,,,,The collection of objects which are used to represent LLDP transmission statistics. This group is mandatory for agents which implement the LLDP and have the capability of transmitting LLDP frames.
.1.0.8802.1.1.2.2.2.6,LLDP-MIB::lldpLocSysGroup,,,,,,The collection of objects which are used to represent LLDP Local System Information.   This group is mandatory for agents which implement the LLDP and have the capability of transmitting LLDP frames.
.1.0.8802.1.1.2.2.2.7,LLDP-MIB::lldpRemSysGroup,,,,,,The collection of objects which are used to represent LLDP Remote Systems Information. The objects represent the information associated with the basic TLV set. Please note that even the agent doesn't implement some of the optional TLVs, it shall recognize all the optional TLV information that the remote system may advertise.  This group is mandatory for agents which implement the LLDP and have the capability of receiving LLDP frames.
.1.0.8802.1.1.2.2.2.8,LLDP-MIB::lldpNotificationsGroup,,,,,,The collection of notifications used to indicate LLDP MIB data consistency and general status information. This group is mandatory for agents which implement the LLDP and have the capability of receiving LLDP frames.
.1.0.8802.17,IEEE-802DOT17-RPR-MIB::ieee802dot17,,,,,,
.1.0.8802.17.1,IEEE-802DOT17-RPR-MIB::ieee802dot17mibs,,,,,,
.1.0.8802.17.1.1,IEEE-802DOT17-RPR-MIB::ieee802dot17rprMIB,,,,,,The resilient packet ring MIB for IEEE 802.17. Copyright (C) IEEE802.17. This version of this MIB module is part of IEEE802.17; see the draft itself for full legal notices.
.1.0.8802.17.1.1.1,IEEE-802DOT17-RPR-MIB::rprObjects,,,,,,
.1.0.8802.17.1.1.1.1,IEEE-802DOT17-RPR-MIB::rprGeneral,,,,,,
.1.0.8802.17.1.1.1.1.1,IEEE-802DOT17-RPR-MIB::rprIfTable,,not-accessible,,current,,The RPR interface table, extension to the ifTable.  All read-write attributes in this table are non-volatile, i.e. will be retained across system reset.
.1.0.8802.17.1.1.1.1.1.1,IEEE-802DOT17-RPR-MIB::rprIfEntry,,not-accessible,rprIfIndex,current,,One such entry for every interface in the ifTable which  has an ifType of RPR interface.
.1.0.8802.17.1.1.1.1.1.1.1,IEEE-802DOT17-RPR-MIB::rprIfIndex,Integer32,not-accessible,,current,,The ifIndex of this RPR interface.
.1.0.8802.17.1.1.1.1.1.1.2,IEEE-802DOT17-RPR-MIB::rprIfStationsOnRing,Unsigned32,read-only,,current,,The number of stations on the RPR ring. When the operStatus of the interface is down the value is 1.
.1.0.8802.17.1.1.1.1.1.1.3,IEEE-802DOT17-RPR-MIB::rprIfReversionMode,INTEGER,read-write,,current,true(1):false(2),The reversion mode of the MAC, False for non-revertive True for revertive. Revertive station will return to idle state after  WTR interval expires. Default value for reversion mode is true.
.1.0.8802.17.1.1.1.1.1.1.4,IEEE-802DOT17-RPR-MIB::rprIfProtectionWTR,Unsigned32,read-write,,current,,Indicates the length of time in seconds, to remain in the protection state, after the cause of an automatic protection is removed. This mechanism prevents protection switch oscillations. Default value for WTR is 10 seconds.
.1.0.8802.17.1.1.1.1.1.1.5,IEEE-802DOT17-RPR-MIB::rprIfProtectionFastTimer,Unsigned32,read-write,,current,,Indicates the protection messages fast timer value in 1 ms units. The fast timer is used for protection protocols. Default value for fast timer protection messages is 10 ms.
.1.0.8802.17.1.1.1.1.1.1.6,IEEE-802DOT17-RPR-MIB::rprIfProtectionSlowTimer,Unsigned32,read-write,,current,,Indicates the protection slow timer value in 50 ms units. The slow timer is used for topology and protection protocols. Default value for slow timer protection and topology messages is 20 units of 50 ms, i.e. 1sec.
.1.0.8802.17.1.1.1.1.1.1.7,IEEE-802DOT17-RPR-MIB::rprIfAtdTimer,Unsigned32,read-write,,current,,Indicates the timer period for ATD message transmissions. Default value is 20 units of 50 ms, i.e. 1sec.
.1.0.8802.17.1.1.1.1.1.1.8,IEEE-802DOT17-RPR-MIB::rprIfKeepaliveTimeout,Unsigned32,read-write,,current,,Indicates the timer to declare keepalive timeout, multiples of 1 millisecond. Default value for keepalive timeout is 3 ms.
.1.0.8802.17.1.1.1.1.1.1.9,IEEE-802DOT17-RPR-MIB::rprIfFairnessAggressive,INTEGER,read-write,,current,true(1):false(2),Indicates whether the selected RPR fairness algorithm is  aggressive or conservative. If true, the selected fairness mode is aggressive. If false, the selected fairness mode is conservative. The default value for fairness aggressive is true.
.1.0.8802.17.1.1.1.1.1.1.10,IEEE-802DOT17-RPR-MIB::rprIfPtqSize,Unsigned32,read-only,,current,,The size in bytes of the Primary Transit Queue per ringlet supported by this RPR MAC.
.1.0.8802.17.1.1.1.1.1.1.11,IEEE-802DOT17-RPR-MIB::rprIfStqSize,Unsigned32,read-only,,current,,The size in bytes of the Secondary Transit Queue per ringlet supported by this RPR MAC.
.1.0.8802.17.1.1.1.1.1.1.12,IEEE-802DOT17-RPR-MIB::rprIfSTQFullThreshold,Unsigned32,read-write,,current,,A level of STQ occupancy at or above which the STQ  is almost full. This attribute specifies the full threshold location in MTU units below the STQ size. The range is [stqHighThreshold + mtuSize, sizeSTQ - mtuSize]. The default value for stqFullThreshold is sizeSTQ - 2*mtuSize.
.1.0.8802.17.1.1.1.1.1.1.13,IEEE-802DOT17-RPR-MIB::rprIfIdleThreshold,Unsigned32,read-write,,current,,Indicates that a MAC is experiencing an adverse rate mismatch. When the PTQ depth exceeds this value,  the incoming link is considered adversely rate mismatched. This attribute specifies the idle-threshold location from the top of the PTQ buffer, in MTU size. Default value should be 1, which means (sizePTQ - mtuSize)
.1.0.8802.17.1.1.1.1.1.1.14,IEEE-802DOT17-RPR-MIB::rprIfSesThreshold,Unsigned32,read-write,,current,,Indicates the number of E-RPR errors to declare  a second as SES-RPR The default value is the rounded integer of 0.000001 * (lineRate * advertisementRatio).
.1.0.8802.17.1.1.1.1.1.1.15,IEEE-802DOT17-RPR-MIB::rprIfWrapConfig,INTEGER,read-write,,current,true(1):false(2),Indicates the configured protection mode,  steering or wrapping, in a MAC that supports both modes. If wrap configured bit is set, the station will  perform wrap protection during ring failures. If the station detects another station on the ring that has a protection configuration that conflicts with its own, the station will generate a defect to higher layers. Default value for wrap preferred is false for steering  only stations, and true for stations that implement wrapping.
.1.0.8802.17.1.1.1.1.1.1.16,IEEE-802DOT17-RPR-MIB::rprIfJumboFramePreferred,INTEGER,read-write,,current,true(1):false(2),Indicates the preference of the manager to support jumbo frame in a MAC that supports jumbo frame. The station advertises the 'logical and' of rprIfJumboFramePreferred and jumbo capable bit in the rprIfMacCapability. Default value for jumbo frame preferred is true. i.e. station supports jumbo frame.
.1.0.8802.17.1.1.1.1.1.1.17,IEEE-802DOT17-RPR-MIB::rprIfMacOperModes,BITS,read-only,,current,strictOrder(0):dropBadFcs(1),The summary of the Mac operational modes. if strictOrder is set, the MAC operates in strict order mode. if dropBadFcs is set, frames with bad FCS are dropped.
.1.0.8802.17.1.1.1.1.1.1.18,IEEE-802DOT17-RPR-MIB::rprIfRingOperModes,BITS,read-only,,current,jumboFrames(0):wrapProtection(1):openRing(2),The summary of the ring operational modes collected through the topology discovery protocol. If at least one station doesn't support jumbo frames,  the jumboFrame bit in this attribute is set to false. Only if all stations support jumbo frames, the bit is true.  If at least one station wasn't configured to wrap,  the wrap bit in this attribute is set to false. Only if all stations configured to wrap, the bit is true. If the ring doesn't complete full loop, the ring is considered openRing, with at least one detected edge.
.1.0.8802.17.1.1.1.1.1.1.19,IEEE-802DOT17-RPR-MIB::rprIfCurrentStatus,BITS,read-only,,current,neighborInconsistency(0):duplicateMac(1):exceedMaxStations(2),Indicates the current status of the RPR interface. this attribute is used to generate alarm to the management system.
.1.0.8802.17.1.1.1.1.1.1.20,IEEE-802DOT17-RPR-MIB::rprIfLastChange,TimeTicks,read-only,,current,,The value of sysUpTime at the time when any of the following attributes changes: rprIfStationsOnRing, rprIfReversionMode, rprIfProtectionWTR, rprIfProtectionFastTimer, rprIfProtectionSlowTimer, rprIfAtdTimer, rprIfKeepaliveTimeout, rprIfFairnessAggressive, rprIfSTQFullThreshold, rprIfIdleThreshold,  rprIfSesThreshold, rprIfWrapConfig, rprIfJumboFramePreferred,  rprIfMacOperModes, rprIfRingOperModes, rprIfCurrentStatus  contents of the rprTopoImageEntry.
.1.0.8802.17.1.1.1.1.1.1.21,IEEE-802DOT17-RPR-MIB::rprIfChanges,Counter32,read-only,,current,,Indicates number of times rprIfLastChange changed.  The discontinued counter value is indicated  by the ifCounterDiscontinuityTime value.
.1.0.8802.17.1.1.1.1.2,IEEE-802DOT17-RPR-MIB::rprIfStatsControlTable,,not-accessible,,current,,The RPR statistics management table, controls the collection, duration, clearance, and status of the MAC statistics. The usage of this table is as follows: 1. In order to clear period of counters (or all periods) of  specific counting point (or all counting points) of the  RPR MAC, the user should first set the  rprIfStatsControlPeriodClear item to specify the period  that he would like to clear, and the  rprIfStatsControlCountPointClear item to specify the  counting point on which he would like to perform the  statistics clearance. In case that the user specified 'clearSpecificInterval' in the rprIfStatsControlPeriodClear item, the user should  also set the specific interval to clear by setting  rprIfStatsControlIntervalClear. After setting these items, the user can activate the  clear operation by setting rprIfStatsControlCommitClear item to 'commit'. The status of the clear operation (done of failed) is  indicated by the returned value of rprIfStatsControlCommitClear item. 2. Setting rprIfStatsControlPeriodClear to 'clearAllIntervals' and rprIfStatsControlCountPointClear to 'clearWest' (for example) will clear all current and previous intervals, and day counters of the west side of the RPR MAC. 3. The IntervalValidData of cleared interval should be set to false. All read-write attributes in this table are volatile, i.e. will be cleared on system reset.
.1.0.8802.17.1.1.1.1.2.1,IEEE-802DOT17-RPR-MIB::rprIfStatsControlEntry,,not-accessible,rprIfStatsControlIfIndex,current,,One such entry for every interface in the ifTable which  has an ifType of RPR interface.
.1.0.8802.17.1.1.1.1.2.1.1,IEEE-802DOT17-RPR-MIB::rprIfStatsControlIfIndex,Integer32,not-accessible,,current,,The ifIndex of this RPR interface.
.1.0.8802.17.1.1.1.1.2.1.2,IEEE-802DOT17-RPR-MIB::rprIfStatsControlPeriodClear,INTEGER,read-write,,current,idle(1):clearAllIntervals(2):clearCurrent(3):clearIntervals(4):clearSpecificInterval(5),This attribute allows for some or all of the  interval statistics for this RPR MAC to be cleared.  It does not affect the values of the running counters  or the counter values reported through the interface MIB. clearSpecificInterval clears the interval indicated by rprIfStatsControlIntervalClear. Default value for period clear is idle.
.1.0.8802.17.1.1.1.1.2.1.3,IEEE-802DOT17-RPR-MIB::rprIfStatsControlCountPointClear,INTEGER,read-write,,current,clearAll(1):clearWest(2):clearEast(3):clearClient(4),This attribute allows for a specific counting point of the  RPR MAC or all of the RPR MAC counting points to be cleared on rprIfStatsControlPeriodClear request. Default value for Interface to clear is clearAll, i.e. clear statistics of all interfaces.
.1.0.8802.17.1.1.1.1.2.1.4,IEEE-802DOT17-RPR-MIB::rprIfStatsControlIntervalClear,Unsigned32,read-write,,current,,The statistics interval number to clear. The interval identified by 1 is the most recently completed 15 minute interval, and interval identified by N is the interval immediately preceding the one identified by N-1. Setting rprIfStatsControlPeriodClear to clearSpecificInterval will clear the interval that is indicated by this object.
.1.0.8802.17.1.1.1.1.2.1.5,IEEE-802DOT17-RPR-MIB::rprIfStatsControlCommitClear,INTEGER,read-write,,current,commit(1):commitDone(2):commitFailed(3),Sends a commit with input parameters to specify the  Period (rprIfStatsControlPeriodClear), count point (rprIfStatsControlCountPointClear) and specific interval (rprIfStatsControlIntervalClear) to clear. If the clear operation succeeds this attribute will have  the value commitDone(2) when read. If the clear operation fails this attribute will have  the value commitFailed(3) when read.
.1.0.8802.17.1.1.1.1.2.1.6,IEEE-802DOT17-RPR-MIB::rprIfStatsControlTimeElapsed,Unsigned32,read-only,,current,,The number of seconds, including partial seconds, that have elapsed since the beginning of the current measurement interval. If, for some reason, such as an adjustment in the system's time-of-day clock, the current interval exceeds the maximum value, the agent will return the maximum value.
.1.0.8802.17.1.1.1.1.2.1.7,IEEE-802DOT17-RPR-MIB::rprIfStatsControlValidIntervals,Unsigned32,read-only,,current,,The number of previous 15-minute intervals for which data was collected. An RPR interface must be capable of supporting at least n intervals. The minimum value of n is 4. The default of n is 32. The maximum value of n is 96. The value will be <n> unless the measurement was (re-)started within the last (<n>*15) minutes, in which case the value will be the number of complete 15 minute intervals for which the agent has at least some data. In certain cases (e.g., in the case where the agent is a proxy) it is possible that some intervals are unavailable. In this case, this interval is the maximum interval number for which data is available. 
.1.0.8802.17.1.1.1.1.3,IEEE-802DOT17-RPR-MIB::rprSpanTable,,not-accessible,,current,,The RPR interface Span table. All read-write attributes in this table are non-volatile, i.e. will be retained across system reset.
.1.0.8802.17.1.1.1.1.3.1,IEEE-802DOT17-RPR-MIB::rprSpanEntry,,not-accessible,rprSpanIfIndex:rprSpanId,current,,One such entry for every span of an RPR interface.
.1.0.8802.17.1.1.1.1.3.1.1,IEEE-802DOT17-RPR-MIB::rprSpanIfIndex,Integer32,not-accessible,,current,,The ifIndex of this RPR interface.
.1.0.8802.17.1.1.1.1.3.1.2,IEEE-802DOT17-RPR-MIB::rprSpanId,INTEGER,not-accessible,,current,east(1):west(2),Indicates the span interface of the RPR MAC. Each RPR  span is connected to both ringlet0 and ringlet1. The east span receives from ringlet1 and transmits through  ringlet0. The west span receives from ringlet0 and transmits through ringlet1.
.1.0.8802.17.1.1.1.1.3.1.3,IEEE-802DOT17-RPR-MIB::rprSpanLowerLayerIfIndex,Integer32,read-only,,current,,The ifIndex of interface which is below the RPR layer in this span. A value of zero indicates an interface index that has  yet to be determined
.1.0.8802.17.1.1.1.1.3.1.4,IEEE-802DOT17-RPR-MIB::rprSpanTotalRingletReservedRate,Unsigned32,read-only,,current,,The total reserved subclassA0 bandwidth on the ringlet. This variable is used by the fairness module to determine the total reclaimable bandwidth.
.1.0.8802.17.1.1.1.1.3.1.5,IEEE-802DOT17-RPR-MIB::rprSpanCurrentStatus,BITS,read-only,,current,keepAliveTimeout(0):miscabling(1):phyLinkDegrade(2):phyLinkFail(3),Indicates the current status of the RPR span. this attribute is used to generate alarm to the management system.
.1.0.8802.17.1.1.1.1.3.1.6,IEEE-802DOT17-RPR-MIB::rprSpanLastChange,TimeTicks,read-only,,current,,The value of sysUpTime at the time when any of the following attributes changes: rprSpanCurrentStatus, rprSpanProtectionNeighborValid, rprSpanProtectionHoldOffTimer, rprSpanProtectionCommand, rprSpanProtectionCount.
.1.0.8802.17.1.1.1.1.3.1.7,IEEE-802DOT17-RPR-MIB::rprSpanChanges,Counter32,read-only,,current,,Indicates number of times rprSpanLastChange changed. The discontinued counter value is indicated  by the ifCounterDiscontinuityTime value.
.1.0.8802.17.1.1.1.1.4,IEEE-802DOT17-RPR-MIB::rprSpanProtectionTable,,not-accessible,,current,,The RPR interface Span protection management table. All read-write attributes in this table are non-volatile, i.e. will be retained across system reset.
.1.0.8802.17.1.1.1.1.4.1,IEEE-802DOT17-RPR-MIB::rprSpanProtectionEntry,,not-accessible,rprSpanProtectionIfIndex:rprSpanProtectionSpan,current,,One such entry for every span of an RPR interface.
.1.0.8802.17.1.1.1.1.4.1.1,IEEE-802DOT17-RPR-MIB::rprSpanProtectionIfIndex,Integer32,not-accessible,,current,,The ifIndex of this RPR interface.
.1.0.8802.17.1.1.1.1.4.1.2,IEEE-802DOT17-RPR-MIB::rprSpanProtectionSpan,INTEGER,not-accessible,,current,east(1):west(2),The Span for this entry.
.1.0.8802.17.1.1.1.1.4.1.3,IEEE-802DOT17-RPR-MIB::rprSpanProtectionNeighborValid,INTEGER,read-only,,current,true(1):false(2),Indicates whether the neighbor address is active or former. true value for active, false for former
.1.0.8802.17.1.1.1.1.4.1.4,IEEE-802DOT17-RPR-MIB::rprSpanProtectionHoldOffTimer,Unsigned32,read-write,,current,,The period that RPR gives to lower layer to perform protection, before it activates its protection mechanism. Default value of hold off timer is 0.
.1.0.8802.17.1.1.1.1.4.1.5,IEEE-802DOT17-RPR-MIB::rprSpanProtectionCommand,INTEGER,read-write,,current,idle(1):manualSwitch(2):forcedSwitch(3),The protection mode requested by management for the local  station that can affect the protection status of the RPR station, according to the set of rules describing the RPR  protection. When read, this object returns the last command written  unless it has been preempted, or idle if no command has been  written to this interface span since initialization. There is no pending of commands, that is if a command has  been preempted by a failure, when the failure clears the  command is not executed. If the command cannot be executed because an equal or \ higher priority request is in effect, an error is returned. writing idle to a span that has no pending protection command, has no affect. An idle clears an active WTR state. The protection commands (arranged in ascending priority  order) are:  idle This command clears the protection for the specified  interface span. This value should be returned by a read request when no  protection command has been written to the object. manualSwitch A protection command on each end of a specified span. This  command doesn't have precedence over automatic protection,  and therefore it can't preempt an existing automatic protection request. forcedSwitch A command on each end of a specified span. This command has precedence over automatic protection, and therefore it can  preempt an existing automatic protection request. Default value of protection command is idle.
.1.0.8802.17.1.1.1.1.4.1.6,IEEE-802DOT17-RPR-MIB::rprSpanProtectionCount,Counter32,read-only,,current,,The number of transitions from idle state to active protection state. The discontinued counter value is indicated  by the ifCounterDiscontinuityTime value.
.1.0.8802.17.1.1.1.1.4.1.7,IEEE-802DOT17-RPR-MIB::rprSpanProtectionDuration,Counter32,read-only,,current,,The total amount of time protection was active on the span interface. The discontinued counter value is indicated  by the ifCounterDiscontinuityTime value.
.1.0.8802.17.1.1.1.1.4.1.8,IEEE-802DOT17-RPR-MIB::rprSpanProtectionLastActivationTime,TimeTicks,read-only,,current,,The value of sysUpTime at the time of the last protection activation.
.1.0.8802.17.1.1.1.1.5,IEEE-802DOT17-RPR-MIB::rprIfChangeSummaryObject,,,,,,
.1.0.8802.17.1.1.1.1.5.1,IEEE-802DOT17-RPR-MIB::rprIfChangeSummaryNumInterfaces,Unsigned32,read-only,,current,,Number of RPR interfaces on this device.
.1.0.8802.17.1.1.1.1.5.2,IEEE-802DOT17-RPR-MIB::rprIfChangeSummaryIfLastChange,TimeTicks,read-only,,current,,Latest timestamp when any instance of rprIfLastChange changed.
.1.0.8802.17.1.1.1.1.5.3,IEEE-802DOT17-RPR-MIB::rprIfChangeSummaryIfChanges,Counter32,read-only,,current,,Number of times any instance of rprIfChanges changed.  The discontinued counter value is indicated  by the ifCounterDiscontinuityTime value.
.1.0.8802.17.1.1.1.1.5.4,IEEE-802DOT17-RPR-MIB::rprIfChangeSummarySpanLastChange,TimeTicks,read-only,,current,,Latest timestamp when any instance of rprSpanLastChange changed.
.1.0.8802.17.1.1.1.1.5.5,IEEE-802DOT17-RPR-MIB::rprIfChangeSummarySpanChanges,Counter32,read-only,,current,,Number of times any instance of rprSpanChanges changed. The discontinued counter value is indicated  by the ifCounterDiscontinuityTime value.
.1.0.8802.17.1.1.1.1.5.6,IEEE-802DOT17-RPR-MIB::rprIfChangeSummaryFairnessLastChange,TimeTicks,read-only,,current,,Latest timestamp when any instance of rprFairnessLastChange changed.
.1.0.8802.17.1.1.1.1.5.7,IEEE-802DOT17-RPR-MIB::rprIfChangeSummaryFairnessChanges,Counter32,read-only,,current,,Number of times any instance of rprFairnessChanges changed. The discontinued counter value is indicated  by the ifCounterDiscontinuityTime value.
.1.0.8802.17.1.1.1.2,IEEE-802DOT17-RPR-MIB::rprProtocols,,,,,,
.1.0.8802.17.1.1.1.2.1,IEEE-802DOT17-RPR-MIB::rprTopoImageTable,,not-accessible,,current,,A topology map that details the list of stations on the RPR ringlets. All attributes in this table are volatile, i.e. will be cleared on system reset.
.1.0.8802.17.1.1.1.2.1.1,IEEE-802DOT17-RPR-MIB::rprTopoImageEntry,,not-accessible,rprTopoImageIfIndex:rprTopoImageMacAddress,current,,Each entry contains information specific to a particular station on the ring. The table has at least one entry for the station itself, this entry indicates zero hops on each ringlet.
.1.0.8802.17.1.1.1.2.1.1.1,IEEE-802DOT17-RPR-MIB::rprTopoImageIfIndex,Integer32,not-accessible,,current,,The ifIndex of this RPR interface.
.1.0.8802.17.1.1.1.2.1.1.2,IEEE-802DOT17-RPR-MIB::rprTopoImageMacAddress,OCTET,not-accessible,,current,,The 48-bit MAC address of the station.
.1.0.8802.17.1.1.1.2.1.1.3,IEEE-802DOT17-RPR-MIB::rprTopoImageSecMacAddress1,OCTET,read-only,,current,,The 48-bit first secondary MAC address of the station. Default and unused value is FF:FF:FF:FF:FF:FF
.1.0.8802.17.1.1.1.2.1.1.4,IEEE-802DOT17-RPR-MIB::rprTopoImageSecMacAddress2,OCTET,read-only,,current,,The 48-bit second secondary MAC address of the station. Default and unused value is FF:FF:FF:FF:FF:FF
.1.0.8802.17.1.1.1.2.1.1.5,IEEE-802DOT17-RPR-MIB::rprTopoImageStationIfIndex,Integer32,read-only,,current,,The station ifIndex.
.1.0.8802.17.1.1.1.2.1.1.6,IEEE-802DOT17-RPR-MIB::rprTopoImageStationName,OCTET,read-only,,current,,The operator assigned station name.
.1.0.8802.17.1.1.1.2.1.1.7,IEEE-802DOT17-RPR-MIB::rprTopoImageInetAddressType,INTEGER,read-only,,current,unknown(0):ipv4(1):ipv6(2):ipv4z(3):ipv6z(4):dns(16),Denotes the address type of the station INET address It should be set to 'unknown' if station INET address is not known.
.1.0.8802.17.1.1.1.2.1.1.8,IEEE-802DOT17-RPR-MIB::rprTopoImageInetAddress,OCTET,read-only,,current,,This object contains the value of of the station  IP (v4 or V6) address. The format of this address is specified by the value  of the corresponding rprTopoImageInetAddressType object. If the address type is unknown, then this object contains the zero-length OCTET-STRING.
.1.0.8802.17.1.1.1.2.1.1.9,IEEE-802DOT17-RPR-MIB::rprTopoImageCapability,BITS,read-only,,current,jumboFrames(0):wrapProtection(1):supportsConservativeFairness(2),Indicates the capabilities that the MAC supports. jumboFrames - Indicates whether the MAC capable of receiving, transmitting and transiting jumbo frames. wrapProtection - Indicates whether the MAC configured to wrap protection. supportsConservativeFairness - indicates the MAC supports conservative fairness algorithm.
.1.0.8802.17.1.1.1.2.1.1.10,IEEE-802DOT17-RPR-MIB::rprTopoImageRinglet0Hops,Integer32,read-only,,current,,The number of hops to this station through ringlet0. The self station is indicated with zero hops. A non reachable station is indicated with -1 value.
.1.0.8802.17.1.1.1.2.1.1.11,IEEE-802DOT17-RPR-MIB::rprTopoImageRinglet0ReservedRate,Unsigned32,read-only,,current,,The amount of A0 traffic that this station adds on ringlet0, in Mb/s units.
.1.0.8802.17.1.1.1.2.1.1.12,IEEE-802DOT17-RPR-MIB::rprTopoImageRinglet1Hops,Integer32,read-only,,current,,The number of hops to this station through ringlet1. The self station is indicated with zero hops. A non reachable station is indicated with -1 value.
.1.0.8802.17.1.1.1.2.1.1.13,IEEE-802DOT17-RPR-MIB::rprTopoImageRinglet1ReservedRate,Unsigned32,read-only,,current,,The amount of A0 traffic that this station adds on ringlet1, in Mb/s units.
.1.0.8802.17.1.1.1.2.1.1.14,IEEE-802DOT17-RPR-MIB::rprTopoImageWestProtectionStatus,BITS,read-only,,current,noRequest(0):waitToRestore(1):manualSwitch(2):signalDegraded(3):signalFailed(4):forcedSwitch(5),The current protection status of the West span.
.1.0.8802.17.1.1.1.2.1.1.15,IEEE-802DOT17-RPR-MIB::rprTopoImageWestWeight,Unsigned32,read-only,,current,,The weight of the station on the west span. used for weighted fairness.
.1.0.8802.17.1.1.1.2.1.1.16,IEEE-802DOT17-RPR-MIB::rprTopoImageEastProtectionStatus,BITS,read-only,,current,noRequest(0):waitToRestore(1):manualSwitch(2):signalDegraded(3):signalFailed(4):forcedSwitch(5),The current protection status of the east span.
.1.0.8802.17.1.1.1.2.1.1.17,IEEE-802DOT17-RPR-MIB::rprTopoImageEastWeight,Unsigned32,read-only,,current,,The weight of the station on the east span. Used for weighted fairness.
.1.0.8802.17.1.1.1.2.1.1.18,IEEE-802DOT17-RPR-MIB::rprTopoImageStatus,BITS,read-only,,current,reachableRinglet0(0):reachableRinglet1(1):wrapActiveWest(2):wrapActiveEast(3):receivedBadFcs(4):receivedMultichokeFairness(5),Status of the station, the reachability of station through ringlet0 and ringlet1, wrap active on the station spans, events of reception frames with bad FCS, events of reception multichoke fairness frames.
.1.0.8802.17.1.1.1.2.2,IEEE-802DOT17-RPR-MIB::rprFairnessTable,,not-accessible,,current,,A table of RPR Fairness per RPR span. All read-write attributes in this table are non-volatile, i.e. will be retained across system reset.
.1.0.8802.17.1.1.1.2.2.1,IEEE-802DOT17-RPR-MIB::rprFairnessEntry,,not-accessible,rprFairnessIfIndex:rprFairnessRinglet,current,,A fairness parameters for a particular ringlet of the an RPR interface.
.1.0.8802.17.1.1.1.2.2.1.1,IEEE-802DOT17-RPR-MIB::rprFairnessIfIndex,Integer32,not-accessible,,current,,The ifIndex of this RPR interface.
.1.0.8802.17.1.1.1.2.2.1.2,IEEE-802DOT17-RPR-MIB::rprFairnessRinglet,INTEGER,not-accessible,,current,ringlet0(1):ringlet1(2),The ringlet for which this row contains information. ringlet0 is the transmission of the east span and the  reception of the west span, ringlet1 is the transmission of the west span and the  reception of the east span
.1.0.8802.17.1.1.1.2.2.1.3,IEEE-802DOT17-RPR-MIB::rprFairnessRingletWeight,Unsigned32,read-write,,current,,Weight assigned to fairness to permit the scaling of  fair rate values among stations on the ringlet. This allows one station to use a larger share of available capacity than another station without violating fairness  principles. The allowed range is [1, 255]. The default value is 1.
.1.0.8802.17.1.1.1.2.2.1.4,IEEE-802DOT17-RPR-MIB::rprFairnessReservedRate,Unsigned32,read-write,,current,,The amount of A0 traffic that this station adds that ringlet, in Mb/s units. Default value for A0 reserved rate is 0 Mb/s.
.1.0.8802.17.1.1.1.2.2.1.5,IEEE-802DOT17-RPR-MIB::rprFairnessMaxAllowed,Unsigned32,read-write,,current,,The maximum value that the station is allowed to transmit local excess traffic to the ringlet. The default value is the physical ring rate.
.1.0.8802.17.1.1.1.2.2.1.6,IEEE-802DOT17-RPR-MIB::rprFairnessAgeCoef,Unsigned32,read-write,,current,,The coefficient used by the aging procedure to specify  the relative weights assigned to  (a) the change in the value of a rate-counter during  the most recent agingInterval and (b) the value of the rate-counter at the end of the previous agingInterval. The value is interpreted as 2 raised to the power specified by this attribute. The default value is 2, giving an aging coefficient of 2**2, or 4.
.1.0.8802.17.1.1.1.2.2.1.7,IEEE-802DOT17-RPR-MIB::rprFairnessRampCoef,Unsigned32,read-write,,current,,The coefficient used for ramping a rate.   The value is interpreted as 2 raised to the power specified by this attribute. The default value is 6, giving a low-pass coefficient of 2**6, or 64.
.1.0.8802.17.1.1.1.2.2.1.8,IEEE-802DOT17-RPR-MIB::rprFairnessLpCoef,Unsigned32,read-write,,current,,The coefficient used by the low-pass filter procedure to specify the relative weights applied to (a) the increase in the rate-count value during the most  recent agingInterval and  (b) the previous low-pass filtered rate. The former is assigned a weight of 1 and the latter a  weight of (lpCoef-1). The value is interpreted as 2 raised to the power specified by this attribute. The default value is 6, giving a low-pass coefficient of 2**6, or 64.
.1.0.8802.17.1.1.1.2.2.1.9,IEEE-802DOT17-RPR-MIB::rprFairnessAdvertisementRatio,Unsigned32,read-write,,current,,The ratio between the link capacity reserved for fairness  control messages and the total link capacity. Default value of fairness advertisement ratio is 5 units of 0.00025, i.e 0.00125.
.1.0.8802.17.1.1.1.2.2.1.10,IEEE-802DOT17-RPR-MIB::rprFairnessMcffReportCoef,Unsigned32,read-write,,current,,Indicates the number of SCFF advertisingIntervals that elapse between the sending of successive MCFFs, This value allows the interval between sending MCFFs  to be established as MCFF_reportingInterval = rprFairnessMcffReportCoef * SCFF_avertisingInterval. The default value is 10.
.1.0.8802.17.1.1.1.2.2.1.11,IEEE-802DOT17-RPR-MIB::rprFairnessActiveWeightsCoef,Unsigned32,read-write,,current,,Indicates the number of agingIntervals that elapse between successive computations of activeWeights. This value allows the interval between computations of  activeWeights to be established as activeWeightsInterval = activeWeightsCoef * agingInterval. The default value is 64.
.1.0.8802.17.1.1.1.2.2.1.12,IEEE-802DOT17-RPR-MIB::rprFairnessSTQHighThreshold,Unsigned32,read-write,,current,,A level of STQ occupancy at or above which CSFE frames are no longer admitted. Defined only for a dual transit-queue  implementation. This attribute specifies the high threshold location in percentage of the STQ size. The allowed range is [2*mtuSize, stqFullThreshold -mtuSize]. The default value is 0.25*stqFullThreshold.
.1.0.8802.17.1.1.1.2.2.1.13,IEEE-802DOT17-RPR-MIB::rprFairnessSTQMedThreshold,Unsigned32,read-write,,current,,A level of buffer occupancy in a dual-queue deployment, at or above which congestion on the outbound link is declared. This attribute specifies the medium threshold location in percentage of the STQ size. The allowed range is [stqLowThreshold + mtuSize, stqHighThreshold - mtuSize]. The default value is 0.5 * (stqHighThreshold + stqLowThreshold).
.1.0.8802.17.1.1.1.2.2.1.14,IEEE-802DOT17-RPR-MIB::rprFairnessSTQLowThreshold,Unsigned32,read-write,,current,,A level of STQ occupancy at or above which congestion on  the outbound link is imminent. Defined only for dual transit-queue implementations.  This attribute specifies the low threshold location in percentage of the STQ size. The range is [mtuSize, stqHighThreshold -mtuSize]. The default value is 0.5*stqHighThreshold.
.1.0.8802.17.1.1.1.2.2.1.15,IEEE-802DOT17-RPR-MIB::rprFairnessRateHighThreshold,Unsigned32,read-write,,current,,Rate at or above which congestion on the outbound link  is declared. The range is [0.4 * unreservedRate, 0.99 * unreservedRate]. The default value is 0.95 * unreservedRate.
.1.0.8802.17.1.1.1.2.2.1.16,IEEE-802DOT17-RPR-MIB::rprFairnessRateLowThreshold,Unsigned32,read-write,,current,,Rate at or above which congestion on the outbound link is imminent. The range is [0.5 * rateHighThreshold, 0.99 * rateHighThreshold]. The default value is 0.9 * rateHighThreshold
.1.0.8802.17.1.1.1.2.2.1.17,IEEE-802DOT17-RPR-MIB::rprFairnessResetWaterMarks,INTEGER,read-write,,current,idle(1):resetWaterMarks(2),Write resetWaterMarks to this attribute to reset  the STQ water marks to the current occupancy. Default value is idle
.1.0.8802.17.1.1.1.2.2.1.18,IEEE-802DOT17-RPR-MIB::rprFairnessSTQHighWaterMark,Unsigned32,read-only,,current,,The highest level of STQ occupancy since the last reset of this value, in percentage of the STQ size.
.1.0.8802.17.1.1.1.2.2.1.19,IEEE-802DOT17-RPR-MIB::rprFairnessSTQLowWaterMark,Unsigned32,read-only,,current,,The lowest level of STQ occupancy since the last reset of this value, in percentage of the STQ size.
.1.0.8802.17.1.1.1.2.2.1.20,IEEE-802DOT17-RPR-MIB::rprFairnessLastChange,TimeTicks,read-only,,current,,The value of sysUpTime at the time when any of the following attributes changes: rprFairnessRingletWeight, rprFairnessReservedRate, rprFairnessMaxAllowed, rprFairnessAgeCoef, rprFairnessRampCoef, rprFairnessLpCoef, rprFairnessAdvertisementRatio, rprFairnessSTQHighThreshold, rprFairnessSTQLowThreshold rprFairnessResetWaterMarks.
.1.0.8802.17.1.1.1.2.2.1.21,IEEE-802DOT17-RPR-MIB::rprFairnessChanges,Counter32,read-only,,current,,Indicates number of times rprFairnessLastChange changed. The discontinued counter value is indicated  by the ifCounterDiscontinuityTime value.
.1.0.8802.17.1.1.1.2.3,IEEE-802DOT17-RPR-MIB::rprOamTable,,not-accessible,,current,,A table of RPR OAM actions. The table is designed to support a one action at a time on an RPR interface. All read-write attributes in this table are volatile, i.e. will be cleared on system reset.
.1.0.8802.17.1.1.1.2.3.1,IEEE-802DOT17-RPR-MIB::rprOamEntry,,not-accessible,rprOamIfIndex,current,,OAM Echo and Flush control for an RPR interface
.1.0.8802.17.1.1.1.2.3.1.1,IEEE-802DOT17-RPR-MIB::rprOamIfIndex,Integer32,not-accessible,,current,,The ifIndex of this RPR interface.
.1.0.8802.17.1.1.1.2.3.1.2,IEEE-802DOT17-RPR-MIB::rprOamActionType,INTEGER,read-write,,current,echo(1):flush(2),The type of OAM action. The valid values for this object are: (1) echo (2) flush.
.1.0.8802.17.1.1.1.2.3.1.3,IEEE-802DOT17-RPR-MIB::rprOamDestAddress,OCTET,read-write,,current,,The 48-bit MAC address of the destination station of OAM session.
.1.0.8802.17.1.1.1.2.3.1.4,IEEE-802DOT17-RPR-MIB::rprOamRequestRinglet,INTEGER,read-write,,current,default(1):ringlet0(2):ringlet1(3):reverseRinglet(4),The ringlet ID on which the OAM request should be sent.
.1.0.8802.17.1.1.1.2.3.1.5,IEEE-802DOT17-RPR-MIB::rprOamResponseRinglet,INTEGER,read-write,,current,default(1):ringlet0(2):ringlet1(3):reverseRinglet(4),The ringlet ID on which the OAM response should be replied.
.1.0.8802.17.1.1.1.2.3.1.6,IEEE-802DOT17-RPR-MIB::rprOamClassOfService,INTEGER,read-write,,current,classA(1):classB(2):classC(3),The class-of-service of OAM session frames
.1.0.8802.17.1.1.1.2.3.1.7,IEEE-802DOT17-RPR-MIB::rprOamUserData,OCTET,read-write,,current,,The operator assigned user specific data.
.1.0.8802.17.1.1.1.2.3.1.8,IEEE-802DOT17-RPR-MIB::rprOamProtected,INTEGER,read-write,,current,true(1):false(2),Indicates whether the OAM action should be protected. In a wrapping ring, If true, the WE (wrap eligible) bit of the OAM action  frame is set to 1. Otherwise, the WE bit is set to 0. In steering ring, If true, in case of failure on the requested ringlet between the source and the destination stations, the OAM action frame will be steered to the alternative ringlet. Otherwise, the OAM action frame will be sent through the requested ringlet regardless of its protection state.
.1.0.8802.17.1.1.1.2.3.1.9,IEEE-802DOT17-RPR-MIB::rprOamRequestCount,Unsigned32,read-write,,current,,Indicates the number of OAM requests to send. Default value of OAM request action is 1.
.1.0.8802.17.1.1.1.2.3.1.10,IEEE-802DOT17-RPR-MIB::rprOamTimeout,Unsigned32,read-write,,current,,Indicates the timer to declare OAM action timeout, in 10usec units. Default value of OAM timeout is 500 units of 10usec (i.e. 5 ms)
.1.0.8802.17.1.1.1.2.3.1.11,IEEE-802DOT17-RPR-MIB::rprOamControl,INTEGER,read-write,,current,idle(1):active(2):abort(3),Control of an OAM action. The valid values for this object are: (1) idle (2) active (3) abort. Default value of OAM control is idle.
.1.0.8802.17.1.1.1.2.3.1.12,IEEE-802DOT17-RPR-MIB::rprOamResponseCount,Unsigned32,read-only,,current,,Indicates the number of OAM actions responses received.
.1.0.8802.17.1.1.1.2.3.1.13,IEEE-802DOT17-RPR-MIB::rprOamAvResponseTime,Unsigned32,read-only,,current,,Average response time to receive the OAM reply.
.1.0.8802.17.1.1.1.2.3.1.14,IEEE-802DOT17-RPR-MIB::rprOamResponseStatus,INTEGER,read-only,,current,unknown(1):inProcess(2):error(3):success(4),Status of an OAM action. The valid values for this object are: (1) unknown (2) inProcess (3) error (4) success. The action status is success if at least 90% of the responses were received till timeout.
.1.0.8802.17.1.1.1.3,IEEE-802DOT17-RPR-MIB::rprSpanCounters,,,,,,
.1.0.8802.17.1.1.1.3.1,IEEE-802DOT17-RPR-MIB::rprSpanCountersCurrentTable,,not-accessible,,current,,The RPR MAC Span interface current counters table. All attributes in this table are volatile, i.e. will be cleared on system reset.
.1.0.8802.17.1.1.1.3.1.1,IEEE-802DOT17-RPR-MIB::rprSpanCountersCurrentEntry,,not-accessible,rprSpanCurrentIfIndex:rprSpanCurrentSpan,current,,Frames and octets statistics for the current interval for the RPR MAC Span interface. The corresponding instance of rprIfStatsControlTimeElapsed indicates the number of seconds which have elapsed  so far in the current interval.
.1.0.8802.17.1.1.1.3.1.1.1,IEEE-802DOT17-RPR-MIB::rprSpanCurrentIfIndex,Integer32,not-accessible,,current,,The ifIndex of this RPR interface.
.1.0.8802.17.1.1.1.3.1.1.2,IEEE-802DOT17-RPR-MIB::rprSpanCurrentSpan,INTEGER,not-accessible,,current,east(1):west(2),An indication of the span of the interface for which this row contains information.
.1.0.8802.17.1.1.1.3.1.1.3,IEEE-802DOT17-RPR-MIB::rprSpanCurrentInUcastClassAFrames,Counter64,read-only,,current,,The number of received (PHY to MAC) classA unicast frames in the current interval.
.1.0.8802.17.1.1.1.3.1.1.4,IEEE-802DOT17-RPR-MIB::rprSpanCurrentInUcastClassAOctets,Counter64,read-only,,current,,The number of received (PHY to MAC) classA unicast octets, in the current interval.
.1.0.8802.17.1.1.1.3.1.1.5,IEEE-802DOT17-RPR-MIB::rprSpanCurrentInUcastClassBCirFrames,Counter64,read-only,,current,,The number of received (PHY to MAC) classB CIR unicast frames in the current interval.
.1.0.8802.17.1.1.1.3.1.1.6,IEEE-802DOT17-RPR-MIB::rprSpanCurrentInUcastClassBCirOctets,Counter64,read-only,,current,,The number of received (PHY to MAC) classB CIR unicast octets in the current interval.
.1.0.8802.17.1.1.1.3.1.1.7,IEEE-802DOT17-RPR-MIB::rprSpanCurrentInUcastClassBEirFrames,Counter64,read-only,,current,,The number of received (PHY to MAC) classB EIR unicast frames in the current interval.
.1.0.8802.17.1.1.1.3.1.1.8,IEEE-802DOT17-RPR-MIB::rprSpanCurrentInUcastClassBEirOctets,Counter64,read-only,,current,,The number of received (PHY to MAC) classB EIR unicast octets in the current interval.
.1.0.8802.17.1.1.1.3.1.1.9,IEEE-802DOT17-RPR-MIB::rprSpanCurrentInUcastClassCFrames,Counter64,read-only,,current,,The number of received (PHY to MAC) classC unicast frames in the current interval.
.1.0.8802.17.1.1.1.3.1.1.10,IEEE-802DOT17-RPR-MIB::rprSpanCurrentInUcastClassCOctets,Counter64,read-only,,current,,The number of received (PHY to MAC) classC unicast octets in the current interval.
.1.0.8802.17.1.1.1.3.1.1.11,IEEE-802DOT17-RPR-MIB::rprSpanCurrentInMcastClassAFrames,Counter64,read-only,,current,,The number of received (PHY to MAC) classA multicast and broadcast frames in the current interval.
.1.0.8802.17.1.1.1.3.1.1.12,IEEE-802DOT17-RPR-MIB::rprSpanCurrentInMcastClassAOctets,Counter64,read-only,,current,,The number of received (PHY to MAC) classA multicast and broadcast octets in the current interval.
.1.0.8802.17.1.1.1.3.1.1.13,IEEE-802DOT17-RPR-MIB::rprSpanCurrentInMcastClassBCirFrames,Counter64,read-only,,current,,The number of received (PHY to MAC) classB CIR multicast and  broadcast frames in the current interval.
.1.0.8802.17.1.1.1.3.1.1.14,IEEE-802DOT17-RPR-MIB::rprSpanCurrentInMcastClassBCirOctets,Counter64,read-only,,current,,The number of received (PHY to MAC) classB CIR multicast and broadcast octets in the current interval.
.1.0.8802.17.1.1.1.3.1.1.15,IEEE-802DOT17-RPR-MIB::rprSpanCurrentInMcastClassBEirFrames,Counter64,read-only,,current,,The number of received (PHY to MAC) classB EIR multicast and broadcast frames in the current interval.
.1.0.8802.17.1.1.1.3.1.1.16,IEEE-802DOT17-RPR-MIB::rprSpanCurrentInMcastClassBEirOctets,Counter64,read-only,,current,,The number of received (PHY to MAC) classB EIR multicast and broadcast octets in the current interval.
.1.0.8802.17.1.1.1.3.1.1.17,IEEE-802DOT17-RPR-MIB::rprSpanCurrentInMcastClassCFrames,Counter64,read-only,,current,,The number of received (PHY to MAC) classC multicast and  broadcast frames in the current interval.
.1.0.8802.17.1.1.1.3.1.1.18,IEEE-802DOT17-RPR-MIB::rprSpanCurrentInMcastClassCOctets,Counter64,read-only,,current,,The number of received (PHY to MAC) classC multicast and broadcast octets in the current interval.
.1.0.8802.17.1.1.1.3.1.1.19,IEEE-802DOT17-RPR-MIB::rprSpanCurrentOutUcastClassAFrames,Counter64,read-only,,current,,The number of transmitted (MAC to PHY) classA unicast frames in the current interval.
.1.0.8802.17.1.1.1.3.1.1.20,IEEE-802DOT17-RPR-MIB::rprSpanCurrentOutUcastClassAOctets,Counter64,read-only,,current,,The number of transmitted (MAC to PHY) classA unicast octets in the current interval.
.1.0.8802.17.1.1.1.3.1.1.21,IEEE-802DOT17-RPR-MIB::rprSpanCurrentOutUcastClassBCirFrames,Counter64,read-only,,current,,The number of transmitted (MAC to PHY) classB CIR unicast frames in the current interval.
.1.0.8802.17.1.1.1.3.1.1.22,IEEE-802DOT17-RPR-MIB::rprSpanCurrentOutUcastClassBCirOctets,Counter64,read-only,,current,,The number of transmitted (MAC to PHY) classB CIR unicast octets in the current interval.
.1.0.8802.17.1.1.1.3.1.1.23,IEEE-802DOT17-RPR-MIB::rprSpanCurrentOutUcastClassBEirFrames,Counter64,read-only,,current,,The number of transmitted (MAC to PHY) classB EIR unicast frames in the current interval.
.1.0.8802.17.1.1.1.3.1.1.24,IEEE-802DOT17-RPR-MIB::rprSpanCurrentOutUcastClassBEirOctets,Counter64,read-only,,current,,The number of transmitted (MAC to PHY) classB EIR unicast octets in the current interval.
.1.0.8802.17.1.1.1.3.1.1.25,IEEE-802DOT17-RPR-MIB::rprSpanCurrentOutUcastClassCFrames,Counter64,read-only,,current,,The number of transmitted (MAC to PHY) classC unicast frames in the current interval.
.1.0.8802.17.1.1.1.3.1.1.26,IEEE-802DOT17-RPR-MIB::rprSpanCurrentOutUcastClassCOctets,Counter64,read-only,,current,,The number of transmitted (MAC to PHY) classC unicast octets in the current interval.
.1.0.8802.17.1.1.1.3.1.1.27,IEEE-802DOT17-RPR-MIB::rprSpanCurrentOutMcastClassAFrames,Counter64,read-only,,current,,The number of transmitted (MAC to PHY) classA multicast and  broadcast frames in the current interval.
.1.0.8802.17.1.1.1.3.1.1.28,IEEE-802DOT17-RPR-MIB::rprSpanCurrentOutMcastClassAOctets,Counter64,read-only,,current,,The number of transmitted (MAC to PHY) classA multicast and  broadcast octets in the current interval.
.1.0.8802.17.1.1.1.3.1.1.29,IEEE-802DOT17-RPR-MIB::rprSpanCurrentOutMcastClassBCirFrames,Counter64,read-only,,current,,The number of transmitted (MAC to PHY) classB CIR multicast and broadcast frames in the current interval.
.1.0.8802.17.1.1.1.3.1.1.30,IEEE-802DOT17-RPR-MIB::rprSpanCurrentOutMcastClassBCirOctets,Counter64,read-only,,current,,The number of transmitted (MAC to PHY) classB CIR multicast and broadcast octets in the current interval.
.1.0.8802.17.1.1.1.3.1.1.31,IEEE-802DOT17-RPR-MIB::rprSpanCurrentOutMcastClassBEirFrames,Counter64,read-only,,current,,The number of transmitted (MAC to PHY) classB EIR multicast and broadcast frames in the current interval.
.1.0.8802.17.1.1.1.3.1.1.32,IEEE-802DOT17-RPR-MIB::rprSpanCurrentOutMcastClassBEirOctets,Counter64,read-only,,current,,The number of transmitted (MAC to PHY) classB EIR multicast and broadcast octets in the current interval.
.1.0.8802.17.1.1.1.3.1.1.33,IEEE-802DOT17-RPR-MIB::rprSpanCurrentOutMcastClassCFrames,Counter64,read-only,,current,,The number of transmitted (MAC to PHY) classC multicast and broadcast frames in the current interval.
.1.0.8802.17.1.1.1.3.1.1.34,IEEE-802DOT17-RPR-MIB::rprSpanCurrentOutMcastClassCOctets,Counter64,read-only,,current,,The number of transmitted (MAC to PHY) classC multicast and  broadcast octets in the current interval.
.1.0.8802.17.1.1.1.3.2,IEEE-802DOT17-RPR-MIB::rprSpanCountersIntervalTable,,not-accessible,,current,,The RPR MAC Span interface interval counters table. All attributes in this table are volatile, i.e. will be cleared on system reset.
.1.0.8802.17.1.1.1.3.2.1,IEEE-802DOT17-RPR-MIB::rprSpanCountersIntervalEntry,,not-accessible,rprSpanIntervalIfIndex:rprSpanIntervalSpan:rprSpanIntervalNumber,current,,Frames and octets statistics collected for a particular  interval for the RPR MAC Span interface of a  particular span of a particular RPR interface. The corresponding instance of rprIfValidIntervals  indicates the number of intervals for which the set of  statistics is available.
.1.0.8802.17.1.1.1.3.2.1.1,IEEE-802DOT17-RPR-MIB::rprSpanIntervalIfIndex,Integer32,not-accessible,,current,,The ifIndex of this RPR interface.
.1.0.8802.17.1.1.1.3.2.1.2,IEEE-802DOT17-RPR-MIB::rprSpanIntervalSpan,INTEGER,not-accessible,,current,east(1):west(2),An indication of the span of the interface for which this  row contains information.
.1.0.8802.17.1.1.1.3.2.1.3,IEEE-802DOT17-RPR-MIB::rprSpanIntervalNumber,Unsigned32,not-accessible,,current,,A number between 1 and 96, which identifies the intervals  for which the set of statistics is available. The interval identified by 1 is the most recently completed 15 minute interval, and interval identified by N is the interval  immediately preceding the one identified by N-1.
.1.0.8802.17.1.1.1.3.2.1.4,IEEE-802DOT17-RPR-MIB::rprSpanIntervalValidData,INTEGER,read-only,,current,true(1):false(2),This variable indicates if the data for this interval  is valid. It will be valid if it contains data for 900 seconds  plus or minus 10 seconds.
.1.0.8802.17.1.1.1.3.2.1.5,IEEE-802DOT17-RPR-MIB::rprSpanIntervalTimeElapsed,Unsigned32,read-only,,current,,The duration of a particular interval in seconds. If, for some reason, such as an adjustment in the system's time-of-day clock, the current interval exceeds the maximum value, the agent will return the maximum value.
.1.0.8802.17.1.1.1.3.2.1.6,IEEE-802DOT17-RPR-MIB::rprSpanIntervalStartTime,OCTET,read-only,,current,,Indicates the wall clock time that this interval started.
.1.0.8802.17.1.1.1.3.2.1.7,IEEE-802DOT17-RPR-MIB::rprSpanIntervalInUcastClassAFrames,Counter64,read-only,,current,,The number of received (PHY to MAC) classA unicast frames in a particular interval in the past 24 hours.
.1.0.8802.17.1.1.1.3.2.1.8,IEEE-802DOT17-RPR-MIB::rprSpanIntervalInUcastClassAOctets,Counter64,read-only,,current,,The number of received (PHY to MAC) classA unicast octets in a particular interval in the past 24 hours.
.1.0.8802.17.1.1.1.3.2.1.9,IEEE-802DOT17-RPR-MIB::rprSpanIntervalInUcastClassBCirFrames,Counter64,read-only,,current,,The number of received (PHY to MAC) classB CIR unicast frames in a particular interval in the past 24 hours.
.1.0.8802.17.1.1.1.3.2.1.10,IEEE-802DOT17-RPR-MIB::rprSpanIntervalInUcastClassBCirOctets,Counter64,read-only,,current,,The number of received (PHY to MAC) classB CIR unicast octets in a particular interval in the past 24 hours.
.1.0.8802.17.1.1.1.3.2.1.11,IEEE-802DOT17-RPR-MIB::rprSpanIntervalInUcastClassBEirFrames,Counter64,read-only,,current,,The number of received (PHY to MAC) classB EIR unicast frames in a particular interval in the past 24 hours.
.1.0.8802.17.1.1.1.3.2.1.12,IEEE-802DOT17-RPR-MIB::rprSpanIntervalInUcastClassBEirOctets,Counter64,read-only,,current,,The number of received (PHY to MAC) classB EIR unicast octets in a particular interval in the past 24 hours.
.1.0.8802.17.1.1.1.3.2.1.13,IEEE-802DOT17-RPR-MIB::rprSpanIntervalInUcastClassCFrames,Counter64,read-only,,current,,The number of received (PHY to MAC) classC unicast frames in a particular interval in the past 24 hours.
.1.0.8802.17.1.1.1.3.2.1.14,IEEE-802DOT17-RPR-MIB::rprSpanIntervalInUcastClassCOctets,Counter64,read-only,,current,,The number of received (PHY to MAC) classC unicast octets in a particular interval in the past 24 hours.
.1.0.8802.17.1.1.1.3.2.1.15,IEEE-802DOT17-RPR-MIB::rprSpanIntervalInMcastClassAFrames,Counter64,read-only,,current,,The number of received (PHY to MAC) classA multicast and  broadcast frames in a particular interval in the past 24 hours.
.1.0.8802.17.1.1.1.3.2.1.16,IEEE-802DOT17-RPR-MIB::rprSpanIntervalInMcastClassAOctets,Counter64,read-only,,current,,The number of received (PHY to MAC) classA multicast and  broadcast octets in a particular interval in the past 24 hours.
.1.0.8802.17.1.1.1.3.2.1.17,IEEE-802DOT17-RPR-MIB::rprSpanIntervalInMcastClassBCirFrames,Counter64,read-only,,current,,The number of received (PHY to MAC) classB CIR multicast and broadcast frames in a particular interval in the past 24 hours.
.1.0.8802.17.1.1.1.3.2.1.18,IEEE-802DOT17-RPR-MIB::rprSpanIntervalInMcastClassBCirOctets,Counter64,read-only,,current,,The number of received (PHY to MAC) classB CIR multicast and broadcast octets in a particular interval in the past 24 hours.
.1.0.8802.17.1.1.1.3.2.1.19,IEEE-802DOT17-RPR-MIB::rprSpanIntervalInMcastClassBEirFrames,Counter64,read-only,,current,,The number of received (PHY to MAC) classB EIR multicast and broadcast frames in a particular interval in the past 24 hours.
.1.0.8802.17.1.1.1.3.2.1.20,IEEE-802DOT17-RPR-MIB::rprSpanIntervalInMcastClassBEirOctets,Counter64,read-only,,current,,The number of received (PHY to MAC) classB EIR multicast and broadcast octets in a particular interval in the past 24 hours.
.1.0.8802.17.1.1.1.3.2.1.21,IEEE-802DOT17-RPR-MIB::rprSpanIntervalInMcastClassCFrames,Counter64,read-only,,current,,The number of received (PHY to MAC) classC multicast and  broadcast frames in a particular interval in the past 24 hours.
.1.0.8802.17.1.1.1.3.2.1.22,IEEE-802DOT17-RPR-MIB::rprSpanIntervalInMcastClassCOctets,Counter64,read-only,,current,,The number of received (PHY to MAC) classC multicast and  broadcast octets in a particular interval in the past 24 hours.
.1.0.8802.17.1.1.1.3.2.1.23,IEEE-802DOT17-RPR-MIB::rprSpanIntervalOutUcastClassAFrames,Counter64,read-only,,current,,The number of transmitted (MAC to PHY) classA unicast frames in a particular interval in the past 24 hours.
.1.0.8802.17.1.1.1.3.2.1.24,IEEE-802DOT17-RPR-MIB::rprSpanIntervalOutUcastClassAOctets,Counter64,read-only,,current,,The number of transmitted (MAC to PHY) classA unicast octets in a particular interval in the past 24 hours.
.1.0.8802.17.1.1.1.3.2.1.25,IEEE-802DOT17-RPR-MIB::rprSpanIntervalOutUcastClassBCirFrames,Counter64,read-only,,current,,The number of transmitted (MAC to PHY) classB CIR unicast frames, in a particular interval in the past 24 hours.
.1.0.8802.17.1.1.1.3.2.1.26,IEEE-802DOT17-RPR-MIB::rprSpanIntervalOutUcastClassBCirOctets,Counter64,read-only,,current,,The number of transmitted (MAC to PHY) classB CIR unicast octets in a particular interval in the past 24 hours.
.1.0.8802.17.1.1.1.3.2.1.27,IEEE-802DOT17-RPR-MIB::rprSpanIntervalOutUcastClassBEirFrames,Counter64,read-only,,current,,The number of transmitted (MAC to PHY) classB EIR unicast frames in a particular interval in the past 24 hours.
.1.0.8802.17.1.1.1.3.2.1.28,IEEE-802DOT17-RPR-MIB::rprSpanIntervalOutUcastClassBEirOctets,Counter64,read-only,,current,,The number of transmitted (MAC to PHY) classB EIR unicast octets in a particular interval in the past 24 hours.
.1.0.8802.17.1.1.1.3.2.1.29,IEEE-802DOT17-RPR-MIB::rprSpanIntervalOutUcastClassCFrames,Counter64,read-only,,current,,The number of transmitted (MAC to PHY) classC unicast frames in a particular interval in the past 24 hours.
.1.0.8802.17.1.1.1.3.2.1.30,IEEE-802DOT17-RPR-MIB::rprSpanIntervalOutUcastClassCOctets,Counter64,read-only,,current,,The number of transmitted (MAC to PHY) classC unicast octets in a particular interval in the past 24 hours.
.1.0.8802.17.1.1.1.3.2.1.31,IEEE-802DOT17-RPR-MIB::rprSpanIntervalOutMcastClassAFrames,Counter64,read-only,,current,,The number of transmitted (MAC to PHY) classA multicast and  broadcast frames in a particular interval in the past 24 hours.
.1.0.8802.17.1.1.1.3.2.1.32,IEEE-802DOT17-RPR-MIB::rprSpanIntervalOutMcastClassAOctets,Counter64,read-only,,current,,The number of transmitted (MAC to PHY) classA multicast and  broadcast octets in a particular interval in the past 24 hours.
.1.0.8802.17.1.1.1.3.2.1.33,IEEE-802DOT17-RPR-MIB::rprSpanIntervalOutMcastClassBCirFrames,Counter64,read-only,,current,,The number of transmitted (MAC to PHY) classB CIR multicast and broadcast frames in a particular interval in the past 24 hours.
.1.0.8802.17.1.1.1.3.2.1.34,IEEE-802DOT17-RPR-MIB::rprSpanIntervalOutMcastClassBCirOctets,Counter64,read-only,,current,,The number of transmitted (MAC to PHY) classB CIR multicast and broadcast octets in a particular interval in the past 24 hours.
.1.0.8802.17.1.1.1.3.2.1.35,IEEE-802DOT17-RPR-MIB::rprSpanIntervalOutMcastClassBEirFrames,Counter64,read-only,,current,,The number of transmitted (MAC to PHY) classB EIR multicast and broadcast frames in a particular interval in the past 24 hours.
.1.0.8802.17.1.1.1.3.2.1.36,IEEE-802DOT17-RPR-MIB::rprSpanIntervalOutMcastClassBEirOctets,Counter64,read-only,,current,,The number of transmitted (MAC to PHY) classB EIR multicast and broadcast octets in a particular interval in the past 24 hours.
.1.0.8802.17.1.1.1.3.2.1.37,IEEE-802DOT17-RPR-MIB::rprSpanIntervalOutMcastClassCFrames,Counter64,read-only,,current,,The number of transmitted (MAC to PHY) classC multicast and broadcast frames in a particular interval in the past 24 hours.
.1.0.8802.17.1.1.1.3.2.1.38,IEEE-802DOT17-RPR-MIB::rprSpanIntervalOutMcastClassCOctets,Counter64,read-only,,current,,The number of transmitted (MAC to PHY) classC multicast and  broadcast octets in a particular interval in the past 24 hours.
.1.0.8802.17.1.1.1.3.3,IEEE-802DOT17-RPR-MIB::rprSpanCountersDayTable,,not-accessible,,current,,The RPR Mac Span Day Table contains the cumulative sum of the various statistics for the 24 hour period preceding the current interval. All attributes in this table are volatile, i.e. will be cleared on system reset.
.1.0.8802.17.1.1.1.3.3.1,IEEE-802DOT17-RPR-MIB::rprSpanCountersDayEntry,,not-accessible,rprSpanDayIfIndex:rprSpanDaySpan,current,,An entry in the RPR Span Day table.
.1.0.8802.17.1.1.1.3.3.1.1,IEEE-802DOT17-RPR-MIB::rprSpanDayIfIndex,Integer32,not-accessible,,current,,The ifIndex of this RPR interface.
.1.0.8802.17.1.1.1.3.3.1.2,IEEE-802DOT17-RPR-MIB::rprSpanDaySpan,INTEGER,not-accessible,,current,east(1):west(2),An indication of the span of the interface for which this  row contains information.
.1.0.8802.17.1.1.1.3.3.1.3,IEEE-802DOT17-RPR-MIB::rprSpanDayInUcastClassAFrames,Counter64,read-only,,current,,The number of received (PHY to MAC) classA unicast frames.
.1.0.8802.17.1.1.1.3.3.1.4,IEEE-802DOT17-RPR-MIB::rprSpanDayInUcastClassAOctets,Counter64,read-only,,current,,The number of received (PHY to MAC) classA unicast octets.
.1.0.8802.17.1.1.1.3.3.1.5,IEEE-802DOT17-RPR-MIB::rprSpanDayInUcastClassBCirFrames,Counter64,read-only,,current,,The number of received (PHY to MAC) classB CIR unicast frames.
.1.0.8802.17.1.1.1.3.3.1.6,IEEE-802DOT17-RPR-MIB::rprSpanDayInUcastClassBCirOctets,Counter64,read-only,,current,,The number of received (PHY to MAC) classB CIR unicast octets.
.1.0.8802.17.1.1.1.3.3.1.7,IEEE-802DOT17-RPR-MIB::rprSpanDayInUcastClassBEirFrames,Counter64,read-only,,current,,The number of received (PHY to MAC) classB EIR unicast frames.
.1.0.8802.17.1.1.1.3.3.1.8,IEEE-802DOT17-RPR-MIB::rprSpanDayInUcastClassBEirOctets,Counter64,read-only,,current,,The number of received (PHY to MAC) classB EIR unicast octets.
.1.0.8802.17.1.1.1.3.3.1.9,IEEE-802DOT17-RPR-MIB::rprSpanDayInUcastClassCFrames,Counter64,read-only,,current,,The number of received (PHY to MAC) classC unicast frames.
.1.0.8802.17.1.1.1.3.3.1.10,IEEE-802DOT17-RPR-MIB::rprSpanDayInUcastClassCOctets,Counter64,read-only,,current,,The number of received (PHY to MAC) classC unicast octets.
.1.0.8802.17.1.1.1.3.3.1.11,IEEE-802DOT17-RPR-MIB::rprSpanDayInMcastClassAFrames,Counter64,read-only,,current,,The number of received (PHY to MAC) classA multicast  and broadcast frames
.1.0.8802.17.1.1.1.3.3.1.12,IEEE-802DOT17-RPR-MIB::rprSpanDayInMcastClassAOctets,Counter64,read-only,,current,,The number of received (PHY to MAC) classA multicast  and broadcast octets
.1.0.8802.17.1.1.1.3.3.1.13,IEEE-802DOT17-RPR-MIB::rprSpanDayInMcastClassBCirFrames,Counter64,read-only,,current,,The number of received (PHY to MAC) classB CIR multicast  and broadcast frames
.1.0.8802.17.1.1.1.3.3.1.14,IEEE-802DOT17-RPR-MIB::rprSpanDayInMcastClassBCirOctets,Counter64,read-only,,current,,The number of received (PHY to MAC) classB CIR multicast  and broadcast octets
.1.0.8802.17.1.1.1.3.3.1.15,IEEE-802DOT17-RPR-MIB::rprSpanDayInMcastClassBEirFrames,Counter64,read-only,,current,,The number of received (PHY to MAC) classB EIR multicast  and broadcast frames
.1.0.8802.17.1.1.1.3.3.1.16,IEEE-802DOT17-RPR-MIB::rprSpanDayInMcastClassBEirOctets,Counter64,read-only,,current,,The number of received (PHY to MAC) classB EIR multicast  and broadcast octets
.1.0.8802.17.1.1.1.3.3.1.17,IEEE-802DOT17-RPR-MIB::rprSpanDayInMcastClassCFrames,Counter64,read-only,,current,,The number of received (PHY to MAC) classC multicast  and broadcast frames
.1.0.8802.17.1.1.1.3.3.1.18,IEEE-802DOT17-RPR-MIB::rprSpanDayInMcastClassCOctets,Counter64,read-only,,current,,The number of received (PHY to MAC) classC multicast and broadcast octets
.1.0.8802.17.1.1.1.3.3.1.19,IEEE-802DOT17-RPR-MIB::rprSpanDayOutUcastClassAFrames,Counter64,read-only,,current,,The number of transmitted (MAC to PHY) classA unicast frames.
.1.0.8802.17.1.1.1.3.3.1.20,IEEE-802DOT17-RPR-MIB::rprSpanDayOutUcastClassAOctets,Counter64,read-only,,current,,The number of transmitted (MAC to PHY) classA unicast octets.
.1.0.8802.17.1.1.1.3.3.1.21,IEEE-802DOT17-RPR-MIB::rprSpanDayOutUcastClassBCirFrames,Counter64,read-only,,current,,The number of transmitted (MAC to PHY) classB CIR unicast frames.
.1.0.8802.17.1.1.1.3.3.1.22,IEEE-802DOT17-RPR-MIB::rprSpanDayOutUcastClassBCirOctets,Counter64,read-only,,current,,The number of transmitted (MAC to PHY) classB CIR unicast octets.
.1.0.8802.17.1.1.1.3.3.1.23,IEEE-802DOT17-RPR-MIB::rprSpanDayOutUcastClassBEirFrames,Counter64,read-only,,current,,The number of transmitted (MAC to PHY) classB EIR unicast  frames
.1.0.8802.17.1.1.1.3.3.1.24,IEEE-802DOT17-RPR-MIB::rprSpanDayOutUcastClassBEirOctets,Counter64,read-only,,current,,The number of transmitted (MAC to PHY) classB EIR unicast  octets
.1.0.8802.17.1.1.1.3.3.1.25,IEEE-802DOT17-RPR-MIB::rprSpanDayOutUcastClassCFrames,Counter64,read-only,,current,,The number of transmitted (MAC to PHY) classC unicast frames
.1.0.8802.17.1.1.1.3.3.1.26,IEEE-802DOT17-RPR-MIB::rprSpanDayOutUcastClassCOctets,Counter64,read-only,,current,,The number of transmitted (MAC to PHY) classC unicast octets
.1.0.8802.17.1.1.1.3.3.1.27,IEEE-802DOT17-RPR-MIB::rprSpanDayOutMcastClassAFrames,Counter64,read-only,,current,,The number of transmitted (MAC to PHY) classA multicast and broadcast  frames.
.1.0.8802.17.1.1.1.3.3.1.28,IEEE-802DOT17-RPR-MIB::rprSpanDayOutMcastClassAOctets,Counter64,read-only,,current,,The number of transmitted (MAC to PHY) classA multicast and broadcast  octets.
.1.0.8802.17.1.1.1.3.3.1.29,IEEE-802DOT17-RPR-MIB::rprSpanDayOutMcastClassBCirFrames,Counter64,read-only,,current,,The number of transmitted (MAC to PHY) classB CIR multicast and broadcast frames.
.1.0.8802.17.1.1.1.3.3.1.30,IEEE-802DOT17-RPR-MIB::rprSpanDayOutMcastClassBCirOctets,Counter64,read-only,,current,,The number of transmitted (MAC to PHY) classB CIR multicast and broadcast octets.
.1.0.8802.17.1.1.1.3.3.1.31,IEEE-802DOT17-RPR-MIB::rprSpanDayOutMcastClassBEirFrames,Counter64,read-only,,current,,The number of transmitted (MAC to PHY) classB EIR multicast and broadcast frames.
.1.0.8802.17.1.1.1.3.3.1.32,IEEE-802DOT17-RPR-MIB::rprSpanDayOutMcastClassBEirOctets,Counter64,read-only,,current,,The number of transmitted (MAC to PHY) classB EIR multicast and broadcast octets.
.1.0.8802.17.1.1.1.3.3.1.33,IEEE-802DOT17-RPR-MIB::rprSpanDayOutMcastClassCFrames,Counter64,read-only,,current,,The number of transmitted (MAC to PHY) classC multicast and broadcast frames.
.1.0.8802.17.1.1.1.3.3.1.34,IEEE-802DOT17-RPR-MIB::rprSpanDayOutMcastClassCOctets,Counter64,read-only,,current,,The number of transmitted (MAC to PHY) classC multicast and broadcast octets.
.1.0.8802.17.1.1.1.3.4,IEEE-802DOT17-RPR-MIB::rprSpanCountersStatsTable,,not-accessible,,current,,The RPR Mac Span interface total counters table. The DiscontinuityTime for this table is indicated by  ifCounterDiscontinuityTime defined in ifXTable. All attributes in this table are volatile, i.e. will be cleared on system reset.
.1.0.8802.17.1.1.1.3.4.1,IEEE-802DOT17-RPR-MIB::rprSpanCountersStatsEntry,,not-accessible,rprSpanStatsIfIndex:rprSpanStatsSpan,current,,An entry in the span stats table.
.1.0.8802.17.1.1.1.3.4.1.1,IEEE-802DOT17-RPR-MIB::rprSpanStatsIfIndex,Integer32,not-accessible,,current,,The ifIndex of this RPR interface.
.1.0.8802.17.1.1.1.3.4.1.2,IEEE-802DOT17-RPR-MIB::rprSpanStatsSpan,INTEGER,not-accessible,,current,east(1):west(2),An indication of the span of the interface for which this  row contains information.
.1.0.8802.17.1.1.1.3.4.1.3,IEEE-802DOT17-RPR-MIB::rprSpanStatsInUcastClassAFrames,Counter64,read-only,,current,,The number of received (PHY to MAC) classA unicast frames.
.1.0.8802.17.1.1.1.3.4.1.4,IEEE-802DOT17-RPR-MIB::rprSpanStatsInUcastClassAOctets,Counter64,read-only,,current,,The number of received (PHY to MAC) classA unicast octets.
.1.0.8802.17.1.1.1.3.4.1.5,IEEE-802DOT17-RPR-MIB::rprSpanStatsInUcastClassBCirFrames,Counter64,read-only,,current,,The number of received (PHY to MAC) classB CIR unicast frames.
.1.0.8802.17.1.1.1.3.4.1.6,IEEE-802DOT17-RPR-MIB::rprSpanStatsInUcastClassBCirOctets,Counter64,read-only,,current,,The number of received (PHY to MAC) classB CIR unicast octets.
.1.0.8802.17.1.1.1.3.4.1.7,IEEE-802DOT17-RPR-MIB::rprSpanStatsInUcastClassBEirFrames,Counter64,read-only,,current,,The number of received (PHY to MAC) classB EIR unicast frames.
.1.0.8802.17.1.1.1.3.4.1.8,IEEE-802DOT17-RPR-MIB::rprSpanStatsInUcastClassBEirOctets,Counter64,read-only,,current,,The number of received (PHY to MAC) classB EIR unicast octets.
.1.0.8802.17.1.1.1.3.4.1.9,IEEE-802DOT17-RPR-MIB::rprSpanStatsInUcastClassCFrames,Counter64,read-only,,current,,The number of received (PHY to MAC) classC unicast frames.
.1.0.8802.17.1.1.1.3.4.1.10,IEEE-802DOT17-RPR-MIB::rprSpanStatsInUcastClassCOctets,Counter64,read-only,,current,,The number of received (PHY to MAC) classC unicast octets.
.1.0.8802.17.1.1.1.3.4.1.11,IEEE-802DOT17-RPR-MIB::rprSpanStatsInMcastClassAFrames,Counter64,read-only,,current,,The number of received (PHY to MAC) classA multicast and  broadcast frames
.1.0.8802.17.1.1.1.3.4.1.12,IEEE-802DOT17-RPR-MIB::rprSpanStatsInMcastClassAOctets,Counter64,read-only,,current,,The number of received (PHY to MAC) classA multicast and  broadcast octets
.1.0.8802.17.1.1.1.3.4.1.13,IEEE-802DOT17-RPR-MIB::rprSpanStatsInMcastClassBCirFrames,Counter64,read-only,,current,,The number of received (PHY to MAC) classB CIR multicast  and broadcast frames
.1.0.8802.17.1.1.1.3.4.1.14,IEEE-802DOT17-RPR-MIB::rprSpanStatsInMcastClassBCirOctets,Counter64,read-only,,current,,The number of received (PHY to MAC) classB CIR multicast  and broadcast octets
.1.0.8802.17.1.1.1.3.4.1.15,IEEE-802DOT17-RPR-MIB::rprSpanStatsInMcastClassBEirFrames,Counter64,read-only,,current,,The number of received (PHY to MAC) classB EIR multicast  and broadcast frames
.1.0.8802.17.1.1.1.3.4.1.16,IEEE-802DOT17-RPR-MIB::rprSpanStatsInMcastClassBEirOctets,Counter64,read-only,,current,,The number of received (PHY to MAC) classB EIR multicast  and broadcast octets
.1.0.8802.17.1.1.1.3.4.1.17,IEEE-802DOT17-RPR-MIB::rprSpanStatsInMcastClassCFrames,Counter64,read-only,,current,,The number of received (PHY to MAC) classC multicast and  broadcast frames
.1.0.8802.17.1.1.1.3.4.1.18,IEEE-802DOT17-RPR-MIB::rprSpanStatsInMcastClassCOctets,Counter64,read-only,,current,,The number of received (PHY to MAC) classC multicast and  broadcast octets
.1.0.8802.17.1.1.1.3.4.1.19,IEEE-802DOT17-RPR-MIB::rprSpanStatsInCtrlFrames,Counter64,read-only,,current,,The number of received (PHY to MAC) control frames processed by this MAC. This does not include control frames in transit, i.e. a multicast control frame received from a ringlet will be counted as In but not Out. This does not include Fairness or idle frames.
.1.0.8802.17.1.1.1.3.4.1.20,IEEE-802DOT17-RPR-MIB::rprSpanStatsInOamEchoFrames,Counter64,read-only,,current,,The number of received (PHY to MAC) OAM echo  frames processed by this MAC.
.1.0.8802.17.1.1.1.3.4.1.21,IEEE-802DOT17-RPR-MIB::rprSpanStatsInOamFlushFrames,Counter64,read-only,,current,,The number of received (PHY to MAC) OAM flush  frames processed by this MAC.
.1.0.8802.17.1.1.1.3.4.1.22,IEEE-802DOT17-RPR-MIB::rprSpanStatsInOamOrgFrames,Counter64,read-only,,current,,The number of received (PHY to MAC) OAM Org  frames processed by this MAC.
.1.0.8802.17.1.1.1.3.4.1.23,IEEE-802DOT17-RPR-MIB::rprSpanStatsInTopoAtdFrames,Counter64,read-only,,current,,The number of received (PHY to MAC) Topology ATD  frames processed by this MAC.
.1.0.8802.17.1.1.1.3.4.1.24,IEEE-802DOT17-RPR-MIB::rprSpanStatsInTopoChkSumFrames,Counter64,read-only,,current,,The number of received (PHY to MAC) topology  checksum frames processed by this MAC.
.1.0.8802.17.1.1.1.3.4.1.25,IEEE-802DOT17-RPR-MIB::rprSpanStatsInTopoTpFrames,Counter64,read-only,,current,,The number of received (PHY to MAC) topology TP  frames processed by this MAC.
.1.0.8802.17.1.1.1.3.4.1.26,IEEE-802DOT17-RPR-MIB::rprSpanStatsOutUcastClassAFrames,Counter64,read-only,,current,,The number of transmitted (MAC to PHY) classA unicast frames.
.1.0.8802.17.1.1.1.3.4.1.27,IEEE-802DOT17-RPR-MIB::rprSpanStatsOutUcastClassAOctets,Counter64,read-only,,current,,The number of transmitted (MAC to PHY) classA unicast octets.
.1.0.8802.17.1.1.1.3.4.1.28,IEEE-802DOT17-RPR-MIB::rprSpanStatsOutUcastClassBCirFrames,Counter64,read-only,,current,,The number of transmitted (MAC to PHY) classB CIR unicast frames.
.1.0.8802.17.1.1.1.3.4.1.29,IEEE-802DOT17-RPR-MIB::rprSpanStatsOutUcastClassBCirOctets,Counter64,read-only,,current,,The number of transmitted (MAC to PHY) classB CIR unicast octets.
.1.0.8802.17.1.1.1.3.4.1.30,IEEE-802DOT17-RPR-MIB::rprSpanStatsOutUcastClassBEirFrames,Counter64,read-only,,current,,The number of transmitted (MAC to PHY) classB EIR unicast frames
.1.0.8802.17.1.1.1.3.4.1.31,IEEE-802DOT17-RPR-MIB::rprSpanStatsOutUcastClassBEirOctets,Counter64,read-only,,current,,The number of transmitted (MAC to PHY) classB EIR unicast octets
.1.0.8802.17.1.1.1.3.4.1.32,IEEE-802DOT17-RPR-MIB::rprSpanStatsOutUcastClassCFrames,Counter64,read-only,,current,,The number of transmitted (MAC to PHY) classC unicast frames
.1.0.8802.17.1.1.1.3.4.1.33,IEEE-802DOT17-RPR-MIB::rprSpanStatsOutUcastClassCOctets,Counter64,read-only,,current,,The number of transmitted (MAC to PHY) classC unicast octets
.1.0.8802.17.1.1.1.3.4.1.34,IEEE-802DOT17-RPR-MIB::rprSpanStatsOutMcastClassAFrames,Counter64,read-only,,current,,The number of transmitted (MAC to PHY) classA multicast and  broadcast frames.
.1.0.8802.17.1.1.1.3.4.1.35,IEEE-802DOT17-RPR-MIB::rprSpanStatsOutMcastClassAOctets,Counter64,read-only,,current,,The number of transmitted (MAC to PHY) classA multicast and  broadcast octets.
.1.0.8802.17.1.1.1.3.4.1.36,IEEE-802DOT17-RPR-MIB::rprSpanStatsOutMcastClassBCirFrames,Counter64,read-only,,current,,The number of transmitted (MAC to PHY) classB CIR multicast and broadcast frames.
.1.0.8802.17.1.1.1.3.4.1.37,IEEE-802DOT17-RPR-MIB::rprSpanStatsOutMcastClassBCirOctets,Counter64,read-only,,current,,The number of transmitted (MAC to PHY) classB CIR multicast and broadcast octets.
.1.0.8802.17.1.1.1.3.4.1.38,IEEE-802DOT17-RPR-MIB::rprSpanStatsOutMcastClassBEirFrames,Counter64,read-only,,current,,The number of transmitted (MAC to PHY) classB EIR multicast and broadcast frames.
.1.0.8802.17.1.1.1.3.4.1.39,IEEE-802DOT17-RPR-MIB::rprSpanStatsOutMcastClassBEirOctets,Counter64,read-only,,current,,The number of transmitted (MAC to PHY) classB EIR multicast and broadcast octets.
.1.0.8802.17.1.1.1.3.4.1.40,IEEE-802DOT17-RPR-MIB::rprSpanStatsOutMcastClassCFrames,Counter64,read-only,,current,,The number of transmitted (MAC to PHY) classC multicast and  broadcast frames.
.1.0.8802.17.1.1.1.3.4.1.41,IEEE-802DOT17-RPR-MIB::rprSpanStatsOutMcastClassCOctets,Counter64,read-only,,current,,The number of transmitted (MAC to PHY) classC multicast and  broadcast octets.
.1.0.8802.17.1.1.1.3.4.1.42,IEEE-802DOT17-RPR-MIB::rprSpanStatsOutCtrlFrames,Counter64,read-only,,current,,The number of transmitted (MAC to PHY) control frames generated by this MAC. This does not include control frames in transit,  i.e. a multicast control frame received from a ringlet will be counted as In but not Out.  This does not include Fairness or idle frames.
.1.0.8802.17.1.1.1.3.4.1.43,IEEE-802DOT17-RPR-MIB::rprSpanStatsOutOamEchoFrames,Counter64,read-only,,current,,The number of transmitted (MAC to PHY) OAM echo frames generated by this MAC.
.1.0.8802.17.1.1.1.3.4.1.44,IEEE-802DOT17-RPR-MIB::rprSpanStatsOutOamFlushFrames,Counter64,read-only,,current,,The number of transmitted (MAC to PHY) OAM flush frames generated by this MAC.
.1.0.8802.17.1.1.1.3.4.1.45,IEEE-802DOT17-RPR-MIB::rprSpanStatsOutOamOrgFrames,Counter64,read-only,,current,,The number of transmitted (MAC to PHY) OAM Org frames generated by this MAC.
.1.0.8802.17.1.1.1.3.4.1.46,IEEE-802DOT17-RPR-MIB::rprSpanStatsOutTopoAtdFrames,Counter64,read-only,,current,,The number of transmitted (MAC to PHY) topology ATD frames generated by this MAC.
.1.0.8802.17.1.1.1.3.4.1.47,IEEE-802DOT17-RPR-MIB::rprSpanStatsOutTopoChkSumFrames,Counter64,read-only,,current,,The number of transmitted (MAC to PHY) topology checksum frames generated by this MAC.
.1.0.8802.17.1.1.1.3.4.1.48,IEEE-802DOT17-RPR-MIB::rprSpanStatsOutTopoTpFrames,Counter64,read-only,,current,,The number of transmitted (MAC to PHY) topology TP frames generated by this MAC.
.1.0.8802.17.1.1.1.4,IEEE-802DOT17-RPR-MIB::rprClientCounters,,,,,,
.1.0.8802.17.1.1.1.4.1,IEEE-802DOT17-RPR-MIB::rprClientCountersCurrentTable,,not-accessible,,current,,The local station traffic current counters table. All attributes in this table are volatile, i.e. will be cleared on system reset.
.1.0.8802.17.1.1.1.4.1.1,IEEE-802DOT17-RPR-MIB::rprClientCountersCurrentEntry,,not-accessible,rprClientCurrentIfIndex,current,,Frames and octets statistics for the current interval for the local station traffic of a particular RPR client interface. The corresponding instance of rprIfTimeElapsed indicates the number of seconds which have elapsed so far in the current interval.
.1.0.8802.17.1.1.1.4.1.1.1,IEEE-802DOT17-RPR-MIB::rprClientCurrentIfIndex,Integer32,not-accessible,,current,,The ifIndex of this RPR interface.
.1.0.8802.17.1.1.1.4.1.1.2,IEEE-802DOT17-RPR-MIB::rprClientCurrentInUcastClassAFrames,Counter64,read-only,,current,,The number of MAC to client classA unicast frames in  the current interval.
.1.0.8802.17.1.1.1.4.1.1.3,IEEE-802DOT17-RPR-MIB::rprClientCurrentInUcastClassAOctets,Counter64,read-only,,current,,The number of MAC to client classA unicast octets in  the current interval.
.1.0.8802.17.1.1.1.4.1.1.4,IEEE-802DOT17-RPR-MIB::rprClientCurrentInUcastClassBCirFrames,Counter64,read-only,,current,,The number of MAC to client classB CIR unicast frames in the current interval.
.1.0.8802.17.1.1.1.4.1.1.5,IEEE-802DOT17-RPR-MIB::rprClientCurrentInUcastClassBCirOctets,Counter64,read-only,,current,,The number of MAC to client classB CIR unicast octets in the current interval.
.1.0.8802.17.1.1.1.4.1.1.6,IEEE-802DOT17-RPR-MIB::rprClientCurrentInUcastClassBEirFrames,Counter64,read-only,,current,,The number of MAC to client classB EIR unicast frames in the current interval.
.1.0.8802.17.1.1.1.4.1.1.7,IEEE-802DOT17-RPR-MIB::rprClientCurrentInUcastClassBEirOctets,Counter64,read-only,,current,,The number of MAC to client classB EIR unicast octets in the current interval.
.1.0.8802.17.1.1.1.4.1.1.8,IEEE-802DOT17-RPR-MIB::rprClientCurrentInUcastClassCFrames,Counter64,read-only,,current,,The number of MAC to client classC unicast frames in the current interval.
.1.0.8802.17.1.1.1.4.1.1.9,IEEE-802DOT17-RPR-MIB::rprClientCurrentInUcastClassCOctets,Counter64,read-only,,current,,The number of MAC to client classC unicast octets in the current interval.
.1.0.8802.17.1.1.1.4.1.1.10,IEEE-802DOT17-RPR-MIB::rprClientCurrentInMcastClassAFrames,Counter64,read-only,,current,,The number of MAC to client classA multicast and broadcast frames in the current interval.
.1.0.8802.17.1.1.1.4.1.1.11,IEEE-802DOT17-RPR-MIB::rprClientCurrentInMcastClassAOctets,Counter64,read-only,,current,,The number of MAC to client classA multicast and broadcast octets in the current interval.
.1.0.8802.17.1.1.1.4.1.1.12,IEEE-802DOT17-RPR-MIB::rprClientCurrentInMcastClassBCirFrames,Counter64,read-only,,current,,The number of MAC to client classB CIR multicast and broadcast frames in the current interval.
.1.0.8802.17.1.1.1.4.1.1.13,IEEE-802DOT17-RPR-MIB::rprClientCurrentInMcastClassBCirOctets,Counter64,read-only,,current,,The number of MAC to client classB CIR multicast and broadcast octets in the current interval.
.1.0.8802.17.1.1.1.4.1.1.14,IEEE-802DOT17-RPR-MIB::rprClientCurrentInMcastClassBEirFrames,Counter64,read-only,,current,,The number of MAC to client classB EIR multicast and broadcast frames in the current interval.
.1.0.8802.17.1.1.1.4.1.1.15,IEEE-802DOT17-RPR-MIB::rprClientCurrentInMcastClassBEirOctets,Counter64,read-only,,current,,The number of MAC to client classB EIR multicast and broadcast octets in the current interval.
.1.0.8802.17.1.1.1.4.1.1.16,IEEE-802DOT17-RPR-MIB::rprClientCurrentInMcastClassCFrames,Counter64,read-only,,current,,The number of MAC to client classC multicast and broadcast frames in the current interval.
.1.0.8802.17.1.1.1.4.1.1.17,IEEE-802DOT17-RPR-MIB::rprClientCurrentInMcastClassCOctets,Counter64,read-only,,current,,The number of MAC to client classC multicast and broadcast octets in the current interval.
.1.0.8802.17.1.1.1.4.1.1.18,IEEE-802DOT17-RPR-MIB::rprClientCurrentOutUcastClassAFrames,Counter64,read-only,,current,,The number of client to MAC classA unicast frames  in the current interval.
.1.0.8802.17.1.1.1.4.1.1.19,IEEE-802DOT17-RPR-MIB::rprClientCurrentOutUcastClassAOctets,Counter64,read-only,,current,,The number of client to MAC classA unicast octets in the current interval.
.1.0.8802.17.1.1.1.4.1.1.20,IEEE-802DOT17-RPR-MIB::rprClientCurrentOutUcastClassBCirFrames,Counter64,read-only,,current,,The number of client to MAC classB CIR unicast frames in the current interval.
.1.0.8802.17.1.1.1.4.1.1.21,IEEE-802DOT17-RPR-MIB::rprClientCurrentOutUcastClassBCirOctets,Counter64,read-only,,current,,The number of client to MAC classB CIR unicast octets in the current interval.
.1.0.8802.17.1.1.1.4.1.1.22,IEEE-802DOT17-RPR-MIB::rprClientCurrentOutUcastClassBEirFrames,Counter64,read-only,,current,,The number of client to MAC classB EIR unicast frames in the current interval.
.1.0.8802.17.1.1.1.4.1.1.23,IEEE-802DOT17-RPR-MIB::rprClientCurrentOutUcastClassBEirOctets,Counter64,read-only,,current,,The number of client to MAC classB EIR unicast octets in the current interval.
.1.0.8802.17.1.1.1.4.1.1.24,IEEE-802DOT17-RPR-MIB::rprClientCurrentOutUcastClassCFrames,Counter64,read-only,,current,,The number of client to MAC classC unicast frames  in the current interval.
.1.0.8802.17.1.1.1.4.1.1.25,IEEE-802DOT17-RPR-MIB::rprClientCurrentOutUcastClassCOctets,Counter64,read-only,,current,,The number of client to MAC classC unicast octets in the current interval.
.1.0.8802.17.1.1.1.4.1.1.26,IEEE-802DOT17-RPR-MIB::rprClientCurrentOutMcastClassAFrames,Counter64,read-only,,current,,The number of client to MAC classA multicast and broadcast frames in the current interval.
.1.0.8802.17.1.1.1.4.1.1.27,IEEE-802DOT17-RPR-MIB::rprClientCurrentOutMcastClassAOctets,Counter64,read-only,,current,,The number of client to MAC classA multicast and broadcast octets in the current interval.
.1.0.8802.17.1.1.1.4.1.1.28,IEEE-802DOT17-RPR-MIB::rprClientCurrentOutMcastClassBCirFrames,Counter64,read-only,,current,,The number of client to MAC classB CIR multicast and broadcast frames in the current interval.
.1.0.8802.17.1.1.1.4.1.1.29,IEEE-802DOT17-RPR-MIB::rprClientCurrentOutMcastClassBCirOctets,Counter64,read-only,,current,,The number of client to MAC classB CIR multicast and broadcast octets in the current interval.
.1.0.8802.17.1.1.1.4.1.1.30,IEEE-802DOT17-RPR-MIB::rprClientCurrentOutMcastClassBEirFrames,Counter64,read-only,,current,,The number of client to MAC classB EIR multicast and broadcast frames in the current interval.
.1.0.8802.17.1.1.1.4.1.1.31,IEEE-802DOT17-RPR-MIB::rprClientCurrentOutMcastClassBEirOctets,Counter64,read-only,,current,,The number of client to MAC classB EIR multicast and broadcast octets in the current interval.
.1.0.8802.17.1.1.1.4.1.1.32,IEEE-802DOT17-RPR-MIB::rprClientCurrentOutMcastClassCFrames,Counter64,read-only,,current,,The number of client to MAC classC multicast and broadcast frames in the current interval.
.1.0.8802.17.1.1.1.4.1.1.33,IEEE-802DOT17-RPR-MIB::rprClientCurrentOutMcastClassCOctets,Counter64,read-only,,current,,The number of client to MAC classC multicast and broadcast octets in the current interval.
.1.0.8802.17.1.1.1.4.2,IEEE-802DOT17-RPR-MIB::rprClientCountersIntervalTable,,not-accessible,,current,,The local station traffic interval counters table. All attributes in this table are volatile, i.e. will be cleared on system reset.
.1.0.8802.17.1.1.1.4.2.1,IEEE-802DOT17-RPR-MIB::rprClientCountersIntervalEntry,,not-accessible,rprClientIntervalIfIndex:rprClientIntervalNumber,current,,Frames and octets statistics collected for a particular interval for local station traffic of a particular RPR  interface. The corresponding instance of rprIfValidIntervals indicates the number of intervals for which the set of statistics is available.
.1.0.8802.17.1.1.1.4.2.1.1,IEEE-802DOT17-RPR-MIB::rprClientIntervalIfIndex,Integer32,not-accessible,,current,,The ifIndex of this RPR interface.
.1.0.8802.17.1.1.1.4.2.1.2,IEEE-802DOT17-RPR-MIB::rprClientIntervalNumber,Unsigned32,not-accessible,,current,,A number between 1 and 96, which identifies the interval for which the set of statistics is available. The interval identified by 1 is the most recently completed 15 minute interval, and interval identified by N is the interval immediately preceding the one identified by N-1.
.1.0.8802.17.1.1.1.4.2.1.3,IEEE-802DOT17-RPR-MIB::rprClientIntervalValidData,INTEGER,read-only,,current,true(1):false(2),This variable indicates if the data for this interval  is valid. It will be valid if it contains data for 900 seconds  plus or minus 10 seconds.
.1.0.8802.17.1.1.1.4.2.1.4,IEEE-802DOT17-RPR-MIB::rprClientIntervalTimeElapsed,Unsigned32,read-only,,current,,The duration of a particular interval in seconds. If, for some reason, such as an adjustment in the system's time-of-day clock, the current interval exceeds the maximum value, the agent will return the maximum value.
.1.0.8802.17.1.1.1.4.2.1.5,IEEE-802DOT17-RPR-MIB::rprClientIntervalInUcastClassAFrames,Counter64,read-only,,current,,The number of MAC to client classA unicast frames  in a particular interval in the past 24 hours.
.1.0.8802.17.1.1.1.4.2.1.6,IEEE-802DOT17-RPR-MIB::rprClientIntervalInUcastClassAOctets,Counter64,read-only,,current,,The number of MAC to client classA unicast octets in a particular interval in the past 24 hours.
.1.0.8802.17.1.1.1.4.2.1.7,IEEE-802DOT17-RPR-MIB::rprClientIntervalInUcastClassBCirFrames,Counter64,read-only,,current,,The number of MAC to client classB CIR unicast frames  in a particular interval in the past 24 hours.
.1.0.8802.17.1.1.1.4.2.1.8,IEEE-802DOT17-RPR-MIB::rprClientIntervalInUcastClassBCirOctets,Counter64,read-only,,current,,The number of MAC to client classB CIR unicast octets in a particular interval in the past 24 hours.
.1.0.8802.17.1.1.1.4.2.1.9,IEEE-802DOT17-RPR-MIB::rprClientIntervalInUcastClassBEirFrames,Counter64,read-only,,current,,The number of MAC to client classB EIR unicast frames in a particular interval in the past 24 hours.
.1.0.8802.17.1.1.1.4.2.1.10,IEEE-802DOT17-RPR-MIB::rprClientIntervalInUcastClassBEirOctets,Counter64,read-only,,current,,The number of MAC to client classB EIR unicast octets in a particular interval in the past 24 hours.
.1.0.8802.17.1.1.1.4.2.1.11,IEEE-802DOT17-RPR-MIB::rprClientIntervalInUcastClassCFrames,Counter64,read-only,,current,,The number of MAC to client classC unicast frames in a particular interval in the past 24 hours.
.1.0.8802.17.1.1.1.4.2.1.12,IEEE-802DOT17-RPR-MIB::rprClientIntervalInUcastClassCOctets,Counter64,read-only,,current,,The number of MAC to client classC unicast octets in a particular interval in the past 24 hours.
.1.0.8802.17.1.1.1.4.2.1.13,IEEE-802DOT17-RPR-MIB::rprClientIntervalInMcastClassAFrames,Counter64,read-only,,current,,The number of MAC to client classA multicast and broadcast frames in a particular interval in the past 24 hours.
.1.0.8802.17.1.1.1.4.2.1.14,IEEE-802DOT17-RPR-MIB::rprClientIntervalInMcastClassAOctets,Counter64,read-only,,current,,The number of MAC to client classA multicast and broadcast octets in a particular interval in the past 24 hours.
.1.0.8802.17.1.1.1.4.2.1.15,IEEE-802DOT17-RPR-MIB::rprClientIntervalInMcastClassBCirFrames,Counter64,read-only,,current,,The number of MAC to client classB CIR multicast and broadcast frames in a particular interval in the past 24 hours.
.1.0.8802.17.1.1.1.4.2.1.16,IEEE-802DOT17-RPR-MIB::rprClientIntervalInMcastClassBCirOctets,Counter64,read-only,,current,,The number of MAC to client classB CIR multicast and broadcast octets in a particular interval in the past 24 hours.
.1.0.8802.17.1.1.1.4.2.1.17,IEEE-802DOT17-RPR-MIB::rprClientIntervalInMcastClassBEirFrames,Counter64,read-only,,current,,The number of MAC to client classB EIR multicast and broadcast frames in a particular interval in the past 24 hours.
.1.0.8802.17.1.1.1.4.2.1.18,IEEE-802DOT17-RPR-MIB::rprClientIntervalInMcastClassBEirOctets,Counter64,read-only,,current,,The number of MAC to client classB EIR multicast and broadcast octets in a particular interval in the past 24 hours.
.1.0.8802.17.1.1.1.4.2.1.19,IEEE-802DOT17-RPR-MIB::rprClientIntervalInMcastClassCFrames,Counter64,read-only,,current,,The number of MAC to client classC multicast and broadcast  frames in a particular interval in the past 24 hours.
.1.0.8802.17.1.1.1.4.2.1.20,IEEE-802DOT17-RPR-MIB::rprClientIntervalInMcastClassCOctets,Counter64,read-only,,current,,The number of MAC to client classC multicast and broadcast  octets in a particular interval in the past 24 hours.
.1.0.8802.17.1.1.1.4.2.1.21,IEEE-802DOT17-RPR-MIB::rprClientIntervalOutUcastClassAFrames,Counter64,read-only,,current,,The number of client to MAC classA unicast frames  in a particular interval in the past 24 hours.
.1.0.8802.17.1.1.1.4.2.1.22,IEEE-802DOT17-RPR-MIB::rprClientIntervalOutUcastClassAOctets,Counter64,read-only,,current,,The number of client to MAC classA unicast octets in a particular interval in the past 24 hours.
.1.0.8802.17.1.1.1.4.2.1.23,IEEE-802DOT17-RPR-MIB::rprClientIntervalOutUcastClassBCirFrames,Counter64,read-only,,current,,The number of client to MAC classB CIR unicast frames in a particular interval in the past 24 hours.
.1.0.8802.17.1.1.1.4.2.1.24,IEEE-802DOT17-RPR-MIB::rprClientIntervalOutUcastClassBCirOctets,Counter64,read-only,,current,,The number of client to MAC classB CIR unicast octets in a particular interval in the past 24 hours.
.1.0.8802.17.1.1.1.4.2.1.25,IEEE-802DOT17-RPR-MIB::rprClientIntervalOutUcastClassBEirFrames,Counter64,read-only,,current,,The number of client to MAC classB EIR unicast frames in a particular interval in the past 24 hours.
.1.0.8802.17.1.1.1.4.2.1.26,IEEE-802DOT17-RPR-MIB::rprClientIntervalOutUcastClassBEirOctets,Counter64,read-only,,current,,The number of client to MAC classB EIR unicast octets in a particular interval in the past 24 hours.
.1.0.8802.17.1.1.1.4.2.1.27,IEEE-802DOT17-RPR-MIB::rprClientIntervalOutUcastClassCFrames,Counter64,read-only,,current,,The number of client to MAC classC unicast frames in a particular interval in the past 24 hours.
.1.0.8802.17.1.1.1.4.2.1.28,IEEE-802DOT17-RPR-MIB::rprClientIntervalOutUcastClassCOctets,Counter64,read-only,,current,,The number of client to MAC classC unicast octets in a particular interval in the past 24 hours.
.1.0.8802.17.1.1.1.4.2.1.29,IEEE-802DOT17-RPR-MIB::rprClientIntervalOutMcastClassAFrames,Counter64,read-only,,current,,The number of client to MAC classA multicast and broadcast frames in a particular interval in the past 24 hours.
.1.0.8802.17.1.1.1.4.2.1.30,IEEE-802DOT17-RPR-MIB::rprClientIntervalOutMcastClassAOctets,Counter64,read-only,,current,,The number of client to MAC classA multicast and broadcast octets in a particular interval in the past 24 hours.
.1.0.8802.17.1.1.1.4.2.1.31,IEEE-802DOT17-RPR-MIB::rprClientIntervalOutMcastClassBCirFrames,Counter64,read-only,,current,,The number of client to MAC classB CIR multicast and broadcast frames in a particular interval in the past 24 hours.
.1.0.8802.17.1.1.1.4.2.1.32,IEEE-802DOT17-RPR-MIB::rprClientIntervalOutMcastClassBCirOctets,Counter64,read-only,,current,,The number of client to MAC classB CIR multicast and broadcast octets in a particular interval in the past 24 hours.
.1.0.8802.17.1.1.1.4.2.1.33,IEEE-802DOT17-RPR-MIB::rprClientIntervalOutMcastClassBEirFrames,Counter64,read-only,,current,,The number of client to MAC classB EIR multicast and broadcast frames in a particular interval in the past 24 hours.
.1.0.8802.17.1.1.1.4.2.1.34,IEEE-802DOT17-RPR-MIB::rprClientIntervalOutMcastClassBEirOctets,Counter64,read-only,,current,,The number of client to MAC classB EIR multicast and broadcast octets in a particular interval in the past 24 hours.
.1.0.8802.17.1.1.1.4.2.1.35,IEEE-802DOT17-RPR-MIB::rprClientIntervalOutMcastClassCFrames,Counter64,read-only,,current,,The number of client to MAC classC multicast and broadcast frames in a particular interval in the past 24 hours.
.1.0.8802.17.1.1.1.4.2.1.36,IEEE-802DOT17-RPR-MIB::rprClientIntervalOutMcastClassCOctets,Counter64,read-only,,current,,The number of client to MAC classC multicast and broadcast octets in a particular interval in the past 24 hours.
.1.0.8802.17.1.1.1.4.3,IEEE-802DOT17-RPR-MIB::rprClientCountersDayTable,,not-accessible,,current,,The RPR Mac Client Day Table contains the cumulative sum of the various statistics for the 24 hour period preceding the current interval. All attributes in this table are volatile, i.e. will be cleared on system reset.
.1.0.8802.17.1.1.1.4.3.1,IEEE-802DOT17-RPR-MIB::rprClientCountersDayEntry,,not-accessible,rprClientDayIfIndex,current,,An entry in the RPR Client Day table.
.1.0.8802.17.1.1.1.4.3.1.1,IEEE-802DOT17-RPR-MIB::rprClientDayIfIndex,Integer32,not-accessible,,current,,The ifIndex of this RPR interface.
.1.0.8802.17.1.1.1.4.3.1.2,IEEE-802DOT17-RPR-MIB::rprClientDayInUcastClassAFrames,Counter64,read-only,,current,,The number of MAC to client classA unicast frames.
.1.0.8802.17.1.1.1.4.3.1.3,IEEE-802DOT17-RPR-MIB::rprClientDayInUcastClassAOctets,Counter64,read-only,,current,,The number of MAC to client classA unicast octets.
.1.0.8802.17.1.1.1.4.3.1.4,IEEE-802DOT17-RPR-MIB::rprClientDayInUcastClassBCirFrames,Counter64,read-only,,current,,The number of MAC to client classB CIR unicast frames.
.1.0.8802.17.1.1.1.4.3.1.5,IEEE-802DOT17-RPR-MIB::rprClientDayInUcastClassBCirOctets,Counter64,read-only,,current,,The number of MAC to client classB CIR unicast octets.
.1.0.8802.17.1.1.1.4.3.1.6,IEEE-802DOT17-RPR-MIB::rprClientDayInUcastClassBEirFrames,Counter64,read-only,,current,,The number of MAC to client classB EIR unicast frames.
.1.0.8802.17.1.1.1.4.3.1.7,IEEE-802DOT17-RPR-MIB::rprClientDayInUcastClassBEirOctets,Counter64,read-only,,current,,The number of MAC to client classB EIR unicast octets.
.1.0.8802.17.1.1.1.4.3.1.8,IEEE-802DOT17-RPR-MIB::rprClientDayInUcastClassCFrames,Counter64,read-only,,current,,The number of MAC to client classC unicast frames.
.1.0.8802.17.1.1.1.4.3.1.9,IEEE-802DOT17-RPR-MIB::rprClientDayInUcastClassCOctets,Counter64,read-only,,current,,The number of MAC to client classC unicast octets.
.1.0.8802.17.1.1.1.4.3.1.10,IEEE-802DOT17-RPR-MIB::rprClientDayInMcastClassAFrames,Counter64,read-only,,current,,The number of MAC to client classA multicast and broadcast frames
.1.0.8802.17.1.1.1.4.3.1.11,IEEE-802DOT17-RPR-MIB::rprClientDayInMcastClassAOctets,Counter64,read-only,,current,,The number of MAC to client classA multicast and broadcast octets
.1.0.8802.17.1.1.1.4.3.1.12,IEEE-802DOT17-RPR-MIB::rprClientDayInMcastClassBCirFrames,Counter64,read-only,,current,,The number of MAC to client classB CIR multicast  and broadcast frames
.1.0.8802.17.1.1.1.4.3.1.13,IEEE-802DOT17-RPR-MIB::rprClientDayInMcastClassBCirOctets,Counter64,read-only,,current,,The number of MAC to client classB CIR multicast  and broadcast octets
.1.0.8802.17.1.1.1.4.3.1.14,IEEE-802DOT17-RPR-MIB::rprClientDayInMcastClassBEirFrames,Counter64,read-only,,current,,The number of MAC to client classB EIR multicast  and broadcast frames
.1.0.8802.17.1.1.1.4.3.1.15,IEEE-802DOT17-RPR-MIB::rprClientDayInMcastClassBEirOctets,Counter64,read-only,,current,,The number of MAC to client classB EIR multicast  and broadcast octets
.1.0.8802.17.1.1.1.4.3.1.16,IEEE-802DOT17-RPR-MIB::rprClientDayInMcastClassCFrames,Counter64,read-only,,current,,The number of MAC to client classC multicast and broadcast frames
.1.0.8802.17.1.1.1.4.3.1.17,IEEE-802DOT17-RPR-MIB::rprClientDayInMcastClassCOctets,Counter64,read-only,,current,,The number of MAC to client classC multicast and broadcast octets
.1.0.8802.17.1.1.1.4.3.1.18,IEEE-802DOT17-RPR-MIB::rprClientDayOutUcastClassAFrames,Counter64,read-only,,current,,The number of client to MAC classA unicast frames.
.1.0.8802.17.1.1.1.4.3.1.19,IEEE-802DOT17-RPR-MIB::rprClientDayOutUcastClassAOctets,Counter64,read-only,,current,,The number of client to MAC classA unicast octets.
.1.0.8802.17.1.1.1.4.3.1.20,IEEE-802DOT17-RPR-MIB::rprClientDayOutUcastClassBCirFrames,Counter64,read-only,,current,,The number of client to MAC classB CIR unicast frames.
.1.0.8802.17.1.1.1.4.3.1.21,IEEE-802DOT17-RPR-MIB::rprClientDayOutUcastClassBCirOctets,Counter64,read-only,,current,,The number of client to MAC classB CIR unicast octets.
.1.0.8802.17.1.1.1.4.3.1.22,IEEE-802DOT17-RPR-MIB::rprClientDayOutUcastClassBEirFrames,Counter64,read-only,,current,,The number of client to MAC classB EIR unicast  frames
.1.0.8802.17.1.1.1.4.3.1.23,IEEE-802DOT17-RPR-MIB::rprClientDayOutUcastClassBEirOctets,Counter64,read-only,,current,,The number of client to MAC classB EIR unicast  octets
.1.0.8802.17.1.1.1.4.3.1.24,IEEE-802DOT17-RPR-MIB::rprClientDayOutUcastClassCFrames,Counter64,read-only,,current,,The number of client to MAC classC unicast frames
.1.0.8802.17.1.1.1.4.3.1.25,IEEE-802DOT17-RPR-MIB::rprClientDayOutUcastClassCOctets,Counter64,read-only,,current,,The number of client to MAC classC unicast octets
.1.0.8802.17.1.1.1.4.3.1.26,IEEE-802DOT17-RPR-MIB::rprClientDayOutMcastClassAFrames,Counter64,read-only,,current,,The number of client to MAC classA multicast and broadcast  frames.
.1.0.8802.17.1.1.1.4.3.1.27,IEEE-802DOT17-RPR-MIB::rprClientDayOutMcastClassAOctets,Counter64,read-only,,current,,The number of client to MAC classA multicast and broadcast  octets.
.1.0.8802.17.1.1.1.4.3.1.28,IEEE-802DOT17-RPR-MIB::rprClientDayOutMcastClassBCirFrames,Counter64,read-only,,current,,The number of client to MAC classB CIR multicast and broadcast frames.
.1.0.8802.17.1.1.1.4.3.1.29,IEEE-802DOT17-RPR-MIB::rprClientDayOutMcastClassBCirOctets,Counter64,read-only,,current,,The number of client to MAC classB CIR multicast and broadcast octets.
.1.0.8802.17.1.1.1.4.3.1.30,IEEE-802DOT17-RPR-MIB::rprClientDayOutMcastClassBEirFrames,Counter64,read-only,,current,,The number of client to MAC classB EIR multicast and broadcast frames.
.1.0.8802.17.1.1.1.4.3.1.31,IEEE-802DOT17-RPR-MIB::rprClientDayOutMcastClassBEirOctets,Counter64,read-only,,current,,The number of client to MAC classB EIR multicast and broadcast octets.
.1.0.8802.17.1.1.1.4.3.1.32,IEEE-802DOT17-RPR-MIB::rprClientDayOutMcastClassCFrames,Counter64,read-only,,current,,The number of client to MAC classC multicast and broadcast frames.
.1.0.8802.17.1.1.1.4.3.1.33,IEEE-802DOT17-RPR-MIB::rprClientDayOutMcastClassCOctets,Counter64,read-only,,current,,The number of client to MAC classC multicast and broadcast octets.
.1.0.8802.17.1.1.1.4.4,IEEE-802DOT17-RPR-MIB::rprClientCountersStatsTable,,not-accessible,,current,,The local station traffic total counters table. The DiscontinuityTime for this table is indicated by  ifCounterDiscontinuityTime defined in ifXTable. All attributes in this table are volatile, i.e. will be cleared on system reset.
.1.0.8802.17.1.1.1.4.4.1,IEEE-802DOT17-RPR-MIB::rprClientCountersStatsEntry,,not-accessible,rprClientStatsIfIndex,current,,An entry in the span stats table.
.1.0.8802.17.1.1.1.4.4.1.1,IEEE-802DOT17-RPR-MIB::rprClientStatsIfIndex,Integer32,not-accessible,,current,,The ifIndex of this RPR interface.
.1.0.8802.17.1.1.1.4.4.1.2,IEEE-802DOT17-RPR-MIB::rprClientStatsInUcastClassAFrames,Counter64,read-only,,current,,The number of MAC to client classA unicast frames.
.1.0.8802.17.1.1.1.4.4.1.3,IEEE-802DOT17-RPR-MIB::rprClientStatsInUcastClassAOctets,Counter64,read-only,,current,,The number of MAC to client classA unicast octets.
.1.0.8802.17.1.1.1.4.4.1.4,IEEE-802DOT17-RPR-MIB::rprClientStatsInUcastClassBCirFrames,Counter64,read-only,,current,,The number of MAC to client classB CIR unicast frames.
.1.0.8802.17.1.1.1.4.4.1.5,IEEE-802DOT17-RPR-MIB::rprClientStatsInUcastClassBCirOctets,Counter64,read-only,,current,,The number of MAC to client classB CIR unicast octets.
.1.0.8802.17.1.1.1.4.4.1.6,IEEE-802DOT17-RPR-MIB::rprClientStatsInUcastClassBEirFrames,Counter64,read-only,,current,,The number of MAC to client classB EIR unicast frames.
.1.0.8802.17.1.1.1.4.4.1.7,IEEE-802DOT17-RPR-MIB::rprClientStatsInUcastClassBEirOctets,Counter64,read-only,,current,,The number of MAC to client classB EIR unicast octets.
.1.0.8802.17.1.1.1.4.4.1.8,IEEE-802DOT17-RPR-MIB::rprClientStatsInUcastClassCFrames,Counter64,read-only,,current,,The number of MAC to client classC unicast frames.
.1.0.8802.17.1.1.1.4.4.1.9,IEEE-802DOT17-RPR-MIB::rprClientStatsInUcastClassCOctets,Counter64,read-only,,current,,The number of MAC to client classC unicast octets.
.1.0.8802.17.1.1.1.4.4.1.10,IEEE-802DOT17-RPR-MIB::rprClientStatsInMcastClassAFrames,Counter64,read-only,,current,,The number of MAC to client classA multicast and broadcast frames
.1.0.8802.17.1.1.1.4.4.1.11,IEEE-802DOT17-RPR-MIB::rprClientStatsInMcastClassAOctets,Counter64,read-only,,current,,The number of MAC to client classA multicast and broadcast octets
.1.0.8802.17.1.1.1.4.4.1.12,IEEE-802DOT17-RPR-MIB::rprClientStatsInMcastClassBCirFrames,Counter64,read-only,,current,,The number of MAC to client classB CIR multicast  and broadcast frames
.1.0.8802.17.1.1.1.4.4.1.13,IEEE-802DOT17-RPR-MIB::rprClientStatsInMcastClassBCirOctets,Counter64,read-only,,current,,The number of MAC to client classB CIR multicast  and broadcast octets
.1.0.8802.17.1.1.1.4.4.1.14,IEEE-802DOT17-RPR-MIB::rprClientStatsInMcastClassBEirFrames,Counter64,read-only,,current,,The number of MAC to client classB EIR multicast  and broadcast frames
.1.0.8802.17.1.1.1.4.4.1.15,IEEE-802DOT17-RPR-MIB::rprClientStatsInMcastClassBEirOctets,Counter64,read-only,,current,,The number of MAC to client classB EIR multicast  and broadcast octets
.1.0.8802.17.1.1.1.4.4.1.16,IEEE-802DOT17-RPR-MIB::rprClientStatsInMcastClassCFrames,Counter64,read-only,,current,,The number of MAC to client classC multicast and broadcast frames
.1.0.8802.17.1.1.1.4.4.1.17,IEEE-802DOT17-RPR-MIB::rprClientStatsInMcastClassCOctets,Counter64,read-only,,current,,The number of MAC to client classC multicast and broadcast octets
.1.0.8802.17.1.1.1.4.4.1.18,IEEE-802DOT17-RPR-MIB::rprClientStatsInBcastFrames,Counter64,read-only,,current,,The number of MAC to client broadcast frames. This is used only when deriving the multicast and broadcast packet counters for the interface MIB.
.1.0.8802.17.1.1.1.4.4.1.19,IEEE-802DOT17-RPR-MIB::rprClientStatsOutUcastClassAFrames,Counter64,read-only,,current,,The number of client to MAC classA unicast frames.
.1.0.8802.17.1.1.1.4.4.1.20,IEEE-802DOT17-RPR-MIB::rprClientStatsOutUcastClassAOctets,Counter64,read-only,,current,,The number of client to MAC classA unicast octets.
.1.0.8802.17.1.1.1.4.4.1.21,IEEE-802DOT17-RPR-MIB::rprClientStatsOutUcastClassBCirFrames,Counter64,read-only,,current,,The number of client to MAC classB CIR unicast frames.
.1.0.8802.17.1.1.1.4.4.1.22,IEEE-802DOT17-RPR-MIB::rprClientStatsOutUcastClassBCirOctets,Counter64,read-only,,current,,The number of client to MAC classB CIR unicast octets.
.1.0.8802.17.1.1.1.4.4.1.23,IEEE-802DOT17-RPR-MIB::rprClientStatsOutUcastClassBEirFrames,Counter64,read-only,,current,,The number of client to MAC classB EIR unicast  frames
.1.0.8802.17.1.1.1.4.4.1.24,IEEE-802DOT17-RPR-MIB::rprClientStatsOutUcastClassBEirOctets,Counter64,read-only,,current,,The number of client to MAC classB EIR unicast  octets
.1.0.8802.17.1.1.1.4.4.1.25,IEEE-802DOT17-RPR-MIB::rprClientStatsOutUcastClassCFrames,Counter64,read-only,,current,,The number of client to MAC classC unicast frames
.1.0.8802.17.1.1.1.4.4.1.26,IEEE-802DOT17-RPR-MIB::rprClientStatsOutUcastClassCOctets,Counter64,read-only,,current,,The number of client to MAC classC unicast octets
.1.0.8802.17.1.1.1.4.4.1.27,IEEE-802DOT17-RPR-MIB::rprClientStatsOutMcastClassAFrames,Counter64,read-only,,current,,The number of client to MAC classA multicast and broadcast  frames.
.1.0.8802.17.1.1.1.4.4.1.28,IEEE-802DOT17-RPR-MIB::rprClientStatsOutMcastClassAOctets,Counter64,read-only,,current,,The number of client to MAC classA multicast and broadcast  octets.
.1.0.8802.17.1.1.1.4.4.1.29,IEEE-802DOT17-RPR-MIB::rprClientStatsOutMcastClassBCirFrames,Counter64,read-only,,current,,The number of client to MAC classB CIR multicast and broadcast frames.
.1.0.8802.17.1.1.1.4.4.1.30,IEEE-802DOT17-RPR-MIB::rprClientStatsOutMcastClassBCirOctets,Counter64,read-only,,current,,The number of client to MAC classB CIR multicast and broadcast octets.
.1.0.8802.17.1.1.1.4.4.1.31,IEEE-802DOT17-RPR-MIB::rprClientStatsOutMcastClassBEirFrames,Counter64,read-only,,current,,The number of client to MAC classB EIR multicast and broadcast frames.
.1.0.8802.17.1.1.1.4.4.1.32,IEEE-802DOT17-RPR-MIB::rprClientStatsOutMcastClassBEirOctets,Counter64,read-only,,current,,The number of client to MAC classB EIR multicast and broadcast octets.
.1.0.8802.17.1.1.1.4.4.1.33,IEEE-802DOT17-RPR-MIB::rprClientStatsOutMcastClassCFrames,Counter64,read-only,,current,,The number of client to MAC classC multicast and broadcast frames.
.1.0.8802.17.1.1.1.4.4.1.34,IEEE-802DOT17-RPR-MIB::rprClientStatsOutMcastClassCOctets,Counter64,read-only,,current,,The number of client to MAC classC multicast and broadcast octets.
.1.0.8802.17.1.1.1.4.4.1.35,IEEE-802DOT17-RPR-MIB::rprClientStatsOutBcastFrames,Counter64,read-only,,current,,The number of client to MAC broadcast frames. This is used only when deriving the multicast and broadcast packet counters for the interface MIB.
.1.0.8802.17.1.1.1.5,IEEE-802DOT17-RPR-MIB::rprSpanErrorCounters,,,,,,
.1.0.8802.17.1.1.1.5.1,IEEE-802DOT17-RPR-MIB::rprSpanErrorCountersCurrentTable,,not-accessible,,current,,The RPR Errors Current counters table. All attributes in this table are volatile, i.e. will be cleared on system reset.
.1.0.8802.17.1.1.1.5.1.1,IEEE-802DOT17-RPR-MIB::rprSpanErrorCountersCurrentEntry,,not-accessible,rprSpanErrorCurrentIfIndex:rprSpanErrorCurrentSpan,current,,Errors statistics for the current interval of a particular span of a particular RPR interface. The corresponding instance of rprIfTimeElapsed indicates the number of seconds which have elapsed so far in the current interval.
.1.0.8802.17.1.1.1.5.1.1.1,IEEE-802DOT17-RPR-MIB::rprSpanErrorCurrentIfIndex,Integer32,not-accessible,,current,,The ifIndex of this RPR interface.
.1.0.8802.17.1.1.1.5.1.1.2,IEEE-802DOT17-RPR-MIB::rprSpanErrorCurrentSpan,INTEGER,not-accessible,,current,east(1):west(2),An indication of the span of the interface for which this row contains information.
.1.0.8802.17.1.1.1.5.1.1.3,IEEE-802DOT17-RPR-MIB::rprSpanErrorCurrentTtlExpFrames,Counter64,read-only,,current,,The number of received (PHY to MAC) data frames that were dropped  due to zero Time To Live (TTL).
.1.0.8802.17.1.1.1.5.1.1.4,IEEE-802DOT17-RPR-MIB::rprSpanErrorCurrentTooLongFrames,Counter64,read-only,,current,,The number of received (PHY to MAC) frames that exceed the  maximum permitted frame size.
.1.0.8802.17.1.1.1.5.1.1.5,IEEE-802DOT17-RPR-MIB::rprSpanErrorCurrentTooShortFrames,Counter64,read-only,,current,,The number of received (PHY to MAC) frames shortest than the minimum permitted frame size.
.1.0.8802.17.1.1.1.5.1.1.6,IEEE-802DOT17-RPR-MIB::rprSpanErrorCurrentBadHecFrames,Counter64,read-only,,current,,The number of received (PHY to MAC) frames with HEC error.
.1.0.8802.17.1.1.1.5.1.1.7,IEEE-802DOT17-RPR-MIB::rprSpanErrorCurrentBadFcsFrames,Counter64,read-only,,current,,The number of received (PHY to MAC) data and control frames where the fcs value did not match the expected fcs value. This includes data frames passed to the client as a result of rprIfMacOperModes being not set to dropBadFcs.
.1.0.8802.17.1.1.1.5.1.1.8,IEEE-802DOT17-RPR-MIB::rprSpanErrorCurrentSelfSrcUcastFrames,Counter64,read-only,,current,,The number of received (PHY to MAC) unicast frames that were  transmitted by the station itself i.e.  the source MAC is equal to the interface MAC.
.1.0.8802.17.1.1.1.5.1.1.9,IEEE-802DOT17-RPR-MIB::rprSpanErrorCurrentPmdAbortFrames,Counter64,read-only,,current,,The number of received (PHY to MAC) frames that were aborted by the PMD.
.1.0.8802.17.1.1.1.5.1.1.10,IEEE-802DOT17-RPR-MIB::rprSpanErrorCurrentBadAddrFrames,Counter64,read-only,,current,,The number of received (PHY to MAC) frames  with invalid SA value.
.1.0.8802.17.1.1.1.5.1.1.11,IEEE-802DOT17-RPR-MIB::rprSpanErrorCurrentBadParityFrames,Counter64,read-only,,current,,The number of received (PHY to MAC) frames  parity value not matching the expected parity value
.1.0.8802.17.1.1.1.5.1.1.12,IEEE-802DOT17-RPR-MIB::rprSpanErrorCurrentContainedFrames,Counter64,read-only,,current,,The number of received (PHY to MAC) frames  that were removed due to context containment
.1.0.8802.17.1.1.1.5.1.1.13,IEEE-802DOT17-RPR-MIB::rprSpanErrorCurrentScffErrors,Counter64,read-only,,current,,The number of received (PHY to MAC) errored SCFF, with bad parity, bad FCS, or both.
.1.0.8802.17.1.1.1.5.1.1.14,IEEE-802DOT17-RPR-MIB::rprSpanErrorCurrentErroredSeconds,Counter64,read-only,,current,,The number of errored seconds.
.1.0.8802.17.1.1.1.5.1.1.15,IEEE-802DOT17-RPR-MIB::rprSpanErrorCurrentSeverelyErroredSeconds,Counter64,read-only,,current,,The number of severely errored seconds.
.1.0.8802.17.1.1.1.5.1.1.16,IEEE-802DOT17-RPR-MIB::rprSpanErrorCurrentUnavailableSeconds,Counter64,read-only,,current,,The number of unavailable seconds.
.1.0.8802.17.1.1.1.5.2,IEEE-802DOT17-RPR-MIB::rprSpanErrorCountersIntervalTable,,not-accessible,,current,,The RPR Errors Interval counters table. All attributes in this table are volatile, i.e. will be cleared on system reset.
.1.0.8802.17.1.1.1.5.2.1,IEEE-802DOT17-RPR-MIB::rprSpanErrorCountersIntervalEntry,,not-accessible,rprSpanErrorIntervalIfIndex:rprSpanErrorIntervalSpan:rprSpanErrorIntervalNumber,current,,Error statistics collected for a particular interval of a particular span of a particular RPR interface. The corresponding instance of rprIfValidIntervals indicates the number of intervals for which the set of statistics is available.
.1.0.8802.17.1.1.1.5.2.1.1,IEEE-802DOT17-RPR-MIB::rprSpanErrorIntervalIfIndex,Integer32,not-accessible,,current,,The ifIndex of this RPR interface.
.1.0.8802.17.1.1.1.5.2.1.2,IEEE-802DOT17-RPR-MIB::rprSpanErrorIntervalSpan,INTEGER,not-accessible,,current,east(1):west(2),An indication of the span of the interface for which this row contains information.
.1.0.8802.17.1.1.1.5.2.1.3,IEEE-802DOT17-RPR-MIB::rprSpanErrorIntervalNumber,Unsigned32,not-accessible,,current,,A number between 1 and 96, which identifies the interval for which the set of statistics is available. The interval identified by 1 is the most recently completed 15 minute interval, and interval identified by N is the interval immediately preceding the one identified by N-1.
.1.0.8802.17.1.1.1.5.2.1.4,IEEE-802DOT17-RPR-MIB::rprSpanErrorIntervalValidData,INTEGER,read-only,,current,true(1):false(2),This variable indicates if the data for this interval  is valid. It will be valid if it contains data for 900 seconds  plus or minus 10 seconds.
.1.0.8802.17.1.1.1.5.2.1.5,IEEE-802DOT17-RPR-MIB::rprSpanErrorIntervalTimeElapsed,Unsigned32,read-only,,current,,The duration of a particular interval in seconds. If, for some reason, such as an adjustment in the system's time-of-day clock, the current interval exceeds the maximum value, the agent will return the maximum value.
.1.0.8802.17.1.1.1.5.2.1.6,IEEE-802DOT17-RPR-MIB::rprSpanErrorIntervalTtlExpFrames,Counter64,read-only,,current,,The number of received (PHY to MAC) frames that were dropped due to zero Time To Live (TTL) in a particular interval in the past 24 hours
.1.0.8802.17.1.1.1.5.2.1.7,IEEE-802DOT17-RPR-MIB::rprSpanErrorIntervalTooLongFrames,Counter64,read-only,,current,,The number of received (PHY to MAC) frames that exceed the maximum  permitted frame size in a particular interval in the past 24 hours
.1.0.8802.17.1.1.1.5.2.1.8,IEEE-802DOT17-RPR-MIB::rprSpanErrorIntervalTooShortFrames,Counter64,read-only,,current,,The number of received (PHY to MAC) frames shortest than the minimum permitted frame size in a particular interval in the past 24 hours.
.1.0.8802.17.1.1.1.5.2.1.9,IEEE-802DOT17-RPR-MIB::rprSpanErrorIntervalBadHecFrames,Counter64,read-only,,current,,The number of received (PHY to MAC) frames with HEC error in a  particular interval in the past 24 hours
.1.0.8802.17.1.1.1.5.2.1.10,IEEE-802DOT17-RPR-MIB::rprSpanErrorIntervalBadFcsFrames,Counter64,read-only,,current,,The number of received (PHY to MAC) data and control frames where the fcs value did not match the expected fcs value. This includes data frames passed to the client as a result of rprIfMacOperModes being not set to dropBadFcs.
.1.0.8802.17.1.1.1.5.2.1.11,IEEE-802DOT17-RPR-MIB::rprSpanErrorIntervalSelfSrcUcastFrames,Counter64,read-only,,current,,The number of received (PHY to MAC) unicast frames that were transmitted by the station itself i.e. the source MAC is equal to the  interface MAC, in a particular interval in the past 24 hours
.1.0.8802.17.1.1.1.5.2.1.12,IEEE-802DOT17-RPR-MIB::rprSpanErrorIntervalPmdAbortFrames,Counter64,read-only,,current,,The number of received (PHY to MAC) unicast frames that were aborted by the PMD layer, in a particular interval in the past 24 hours
.1.0.8802.17.1.1.1.5.2.1.13,IEEE-802DOT17-RPR-MIB::rprSpanErrorIntervalBadAddrFrames,Counter64,read-only,,current,,The number of received (PHY to MAC) frames  with invalid SA value.
.1.0.8802.17.1.1.1.5.2.1.14,IEEE-802DOT17-RPR-MIB::rprSpanErrorIntervalBadParityFrames,Counter64,read-only,,current,,The number of received (PHY to MAC) frames  parity value not matching the expected parity value
.1.0.8802.17.1.1.1.5.2.1.15,IEEE-802DOT17-RPR-MIB::rprSpanErrorIntervalContainedFrames,Counter64,read-only,,current,,The number of received (PHY to MAC) frames  that were removed due to context containment
.1.0.8802.17.1.1.1.5.2.1.16,IEEE-802DOT17-RPR-MIB::rprSpanErrorIntervalScffErrors,Counter64,read-only,,current,,The number of received (PHY to MAC) errored SCFF, with bad parity, bad FCS, or both.
.1.0.8802.17.1.1.1.5.2.1.17,IEEE-802DOT17-RPR-MIB::rprSpanErrorIntervalErroredSeconds,Counter64,read-only,,current,,The number of errored seconds.
.1.0.8802.17.1.1.1.5.2.1.18,IEEE-802DOT17-RPR-MIB::rprSpanErrorIntervalSeverelyErroredSeconds,Counter64,read-only,,current,,The number of severely errored seconds.
.1.0.8802.17.1.1.1.5.2.1.19,IEEE-802DOT17-RPR-MIB::rprSpanErrorIntervalUnavailableSeconds,Counter64,read-only,,current,,The number of unavailable seconds.
.1.0.8802.17.1.1.1.5.3,IEEE-802DOT17-RPR-MIB::rprSpanErrorCountersDayTable,,not-accessible,,current,,The RPR Mac Error Day Table contains the cumulative sum of the various statistics for the 24 hour period preceding the current interval. All attributes in this table are volatile, i.e. will be cleared on system reset.
.1.0.8802.17.1.1.1.5.3.1,IEEE-802DOT17-RPR-MIB::rprSpanErrorCountersDayEntry,,not-accessible,rprSpanErrorDayIfIndex:rprSpanErrorDaySpan,current,,An entry in the RPR Error Day table.
.1.0.8802.17.1.1.1.5.3.1.1,IEEE-802DOT17-RPR-MIB::rprSpanErrorDayIfIndex,Integer32,not-accessible,,current,,The ifIndex of this RPR interface.
.1.0.8802.17.1.1.1.5.3.1.2,IEEE-802DOT17-RPR-MIB::rprSpanErrorDaySpan,INTEGER,not-accessible,,current,east(1):west(2),An indication of the span of the interface for which this row contains information.
.1.0.8802.17.1.1.1.5.3.1.3,IEEE-802DOT17-RPR-MIB::rprSpanErrorDayTtlExpFrames,Counter64,read-only,,current,,The number of received (PHY to MAC) frames that were dropped  due to zero Time To Live (TTL).
.1.0.8802.17.1.1.1.5.3.1.4,IEEE-802DOT17-RPR-MIB::rprSpanErrorDayTooLongFrames,Counter64,read-only,,current,,The number of received (PHY to MAC) frames that exceed the  maximum permitted frame size.
.1.0.8802.17.1.1.1.5.3.1.5,IEEE-802DOT17-RPR-MIB::rprSpanErrorDayTooShortFrames,Counter64,read-only,,current,,The number of received (PHY to MAC) frames shortest than the minimum permitted frame size.
.1.0.8802.17.1.1.1.5.3.1.6,IEEE-802DOT17-RPR-MIB::rprSpanErrorDayBadHecFrames,Counter64,read-only,,current,,The number of received (PHY to MAC) frames with HEC error.
.1.0.8802.17.1.1.1.5.3.1.7,IEEE-802DOT17-RPR-MIB::rprSpanErrorDayBadFcsFrames,Counter64,read-only,,current,,The number of received (PHY to MAC) data and control frames where the fcs value did not match the expected fcs value. This includes data frames passed to the client as a result of rprIfMacOperModes being not set to dropBadFcs.
.1.0.8802.17.1.1.1.5.3.1.8,IEEE-802DOT17-RPR-MIB::rprSpanErrorDaySelfSrcUcastFrames,Counter64,read-only,,current,,The number of received (PHY to MAC) unicast frames that were  transmitted by the station itself i.e.  the source MAC is equal to the interface MAC.
.1.0.8802.17.1.1.1.5.3.1.9,IEEE-802DOT17-RPR-MIB::rprSpanErrorDayPmdAbortFrames,Counter64,read-only,,current,,The number of received (PHY to MAC) frames that were  aborted by the PMD
.1.0.8802.17.1.1.1.5.3.1.10,IEEE-802DOT17-RPR-MIB::rprSpanErrorDayBadAddrFrames,Counter64,read-only,,current,,The number of received (PHY to MAC) frames  with invalid SA value.
.1.0.8802.17.1.1.1.5.3.1.11,IEEE-802DOT17-RPR-MIB::rprSpanErrorDayBadParityFrames,Counter64,read-only,,current,,The number of received (PHY to MAC) frames  parity value not matching the expected parity value
.1.0.8802.17.1.1.1.5.3.1.12,IEEE-802DOT17-RPR-MIB::rprSpanErrorDayContainedFrames,Counter64,read-only,,current,,The number of received (PHY to MAC) frames  that were removed due to context containment
.1.0.8802.17.1.1.1.5.3.1.13,IEEE-802DOT17-RPR-MIB::rprSpanErrorDayScffErrors,Counter64,read-only,,current,,The number of received (PHY to MAC) errored SCFF, with bad parity, bad FCS, or both.
.1.0.8802.17.1.1.1.5.3.1.14,IEEE-802DOT17-RPR-MIB::rprSpanErrorDayErroredSeconds,Counter64,read-only,,current,,The number of errored seconds.
.1.0.8802.17.1.1.1.5.3.1.15,IEEE-802DOT17-RPR-MIB::rprSpanErrorDaySeverelyErroredSeconds,Counter64,read-only,,current,,The number of severely errored seconds.
.1.0.8802.17.1.1.1.5.3.1.16,IEEE-802DOT17-RPR-MIB::rprSpanErrorDayUnavailableSeconds,Counter64,read-only,,current,,The number of unavailable seconds.
.1.0.8802.17.1.1.1.5.4,IEEE-802DOT17-RPR-MIB::rprSpanErrorCountersStatsTable,,not-accessible,,current,,The RPR Errors total counters table. The DiscontinuityTime for this table is indicated by  ifCounterDiscontinuityTime defined in ifXTable. All attributes in this table are volatile, i.e. will be cleared on system reset.
.1.0.8802.17.1.1.1.5.4.1,IEEE-802DOT17-RPR-MIB::rprSpanErrorCountersStatsEntry,,not-accessible,rprSpanErrorStatsIfIndex:rprSpanErrorStatsSpan,current,,An entry in the span error counter table.
.1.0.8802.17.1.1.1.5.4.1.1,IEEE-802DOT17-RPR-MIB::rprSpanErrorStatsIfIndex,Integer32,not-accessible,,current,,The ifIndex of this RPR interface.
.1.0.8802.17.1.1.1.5.4.1.2,IEEE-802DOT17-RPR-MIB::rprSpanErrorStatsSpan,INTEGER,not-accessible,,current,east(1):west(2),An indication of the span of the interface for which this row contains information.
.1.0.8802.17.1.1.1.5.4.1.3,IEEE-802DOT17-RPR-MIB::rprSpanErrorStatsTtlExpFrames,Counter64,read-only,,current,,The number of received (PHY to MAC) frames that were dropped  due to zero Time To Live (TTL).
.1.0.8802.17.1.1.1.5.4.1.4,IEEE-802DOT17-RPR-MIB::rprSpanErrorStatsTooLongFrames,Counter64,read-only,,current,,The number of received (PHY to MAC) frames that exceed the  maximum permitted frame size.
.1.0.8802.17.1.1.1.5.4.1.5,IEEE-802DOT17-RPR-MIB::rprSpanErrorStatsTooShortFrames,Counter64,read-only,,current,,The number of received (PHY to MAC) frames shortest than the minimum permitted frame size.
.1.0.8802.17.1.1.1.5.4.1.6,IEEE-802DOT17-RPR-MIB::rprSpanErrorStatsBadHecFrames,Counter64,read-only,,current,,The number of received (PHY to MAC) frames with HEC error.
.1.0.8802.17.1.1.1.5.4.1.7,IEEE-802DOT17-RPR-MIB::rprSpanErrorStatsBadFcsFrames,Counter64,read-only,,current,,The number of received (PHY to MAC) data and control frames where the fcs value did not match the expected fcs value. This includes data frames passed to the client as a result of rprIfMacOperModes being not set to dropBadFcs.
.1.0.8802.17.1.1.1.5.4.1.8,IEEE-802DOT17-RPR-MIB::rprSpanErrorStatsSelfSrcUcastFrames,Counter64,read-only,,current,,The number of received (PHY to MAC) unicast frames that were  transmitted by the station itself i.e.  the source MAC is equal to the interface MAC.
.1.0.8802.17.1.1.1.5.4.1.9,IEEE-802DOT17-RPR-MIB::rprSpanErrorStatsPmdAbortFrames,Counter64,read-only,,current,,The number of received (PHY to MAC) frames that  were aborted by the PMD
.1.0.8802.17.1.1.1.5.4.1.10,IEEE-802DOT17-RPR-MIB::rprSpanErrorStatsBadAddrFrames,Counter64,read-only,,current,,The number of received (PHY to MAC) frames  with invalid SA value.
.1.0.8802.17.1.1.1.5.4.1.11,IEEE-802DOT17-RPR-MIB::rprSpanErrorStatsBadParityFrames,Counter64,read-only,,current,,The number of received (PHY to MAC) frames  parity value not matching the expected parity value
.1.0.8802.17.1.1.1.5.4.1.12,IEEE-802DOT17-RPR-MIB::rprSpanErrorStatsContainedFrames,Counter64,read-only,,current,,The number of received (PHY to MAC) frames  that were removed due to context containment
.1.0.8802.17.1.1.1.5.4.1.13,IEEE-802DOT17-RPR-MIB::rprSpanErrorStatsScffErrors,Counter64,read-only,,current,,The number of received (PHY to MAC) errored SCFF, with bad parity, bad FCS, or both.
.1.0.8802.17.1.1.2,IEEE-802DOT17-RPR-MIB::rprConformance,,,,,,
.1.0.8802.17.1.1.2.1,IEEE-802DOT17-RPR-MIB::rprGroups,,,,,,
.1.0.8802.17.1.1.2.1.1,IEEE-802DOT17-RPR-MIB::rprIfGroup,,,,,,Collection of objects needed for RPR MAC  configuration.
.1.0.8802.17.1.1.2.1.2,IEEE-802DOT17-RPR-MIB::rprIfGroupOpt,,,,,,Collection of objects for RPR MAC.
.1.0.8802.17.1.1.2.1.3,IEEE-802DOT17-RPR-MIB::rprIfStatsControlGroup,,,,,,Collection of objects needed for RPR MAC  statistics management.
.1.0.8802.17.1.1.2.1.4,IEEE-802DOT17-RPR-MIB::rprSpanGroup,,,,,,Collection of objects needed for RPR Span configuration.
.1.0.8802.17.1.1.2.1.5,IEEE-802DOT17-RPR-MIB::rprSpanGroupOpt,,,,,,Collection of objects for RPR Span.
.1.0.8802.17.1.1.2.1.6,IEEE-802DOT17-RPR-MIB::rprSpanProtectionGroup,,,,,,Collection of objects needed for RPR Span Protection monitoring.
.1.0.8802.17.1.1.2.1.7,IEEE-802DOT17-RPR-MIB::rprTopoGroup,,,,,,Collection of objects needed for RPR Topology discovery.
.1.0.8802.17.1.1.2.1.8,IEEE-802DOT17-RPR-MIB::rprFairnessGroup,,,,,,Collection of objects needed for RPR Fairness configuration.
.1.0.8802.17.1.1.2.1.9,IEEE-802DOT17-RPR-MIB::rprFairnessGroupOpt,,,,,,Collection of objects for RPR Fairness.
.1.0.8802.17.1.1.2.1.10,IEEE-802DOT17-RPR-MIB::rprOamGroup,,,,,,Collection of objects needed for RPR OAM configuration.
.1.0.8802.17.1.1.2.1.11,IEEE-802DOT17-RPR-MIB::rprIfChangeSummaryGroup,,,,,,Collection of objects summarizes changes on the RPR interfaces.
.1.0.8802.17.1.1.2.1.12,IEEE-802DOT17-RPR-MIB::rprSpanCurrentGroup,,,,,,Collection of objects counting MAC span current statistics.
.1.0.8802.17.1.1.2.1.13,IEEE-802DOT17-RPR-MIB::rprSpanIntervalGroup,,,,,,Collection of objects counting MAC span intervals statistics.
.1.0.8802.17.1.1.2.1.14,IEEE-802DOT17-RPR-MIB::rprSpanDayGroup,,,,,,Collection of objects counting MAC span 24 hours statistics.
.1.0.8802.17.1.1.2.1.15,IEEE-802DOT17-RPR-MIB::rprSpanStatsGroup,,,,,,Collection of objects counting MAC span total statistics.
.1.0.8802.17.1.1.2.1.16,IEEE-802DOT17-RPR-MIB::rprClientCurrentGroup,,,,,,Collection of objects counting MAC client interface current statistics.
.1.0.8802.17.1.1.2.1.17,IEEE-802DOT17-RPR-MIB::rprClientIntervalGroup,,,,,,Collection of objects counting MAC client interface intervals statistics.
.1.0.8802.17.1.1.2.1.18,IEEE-802DOT17-RPR-MIB::rprClientDayGroup,,,,,,Collection of objects counting MAC client interface 24 hours statistics.
.1.0.8802.17.1.1.2.1.19,IEEE-802DOT17-RPR-MIB::rprClientStatsGroup,,,,,,Collection of objects counting MAC client interface total statistics.
.1.0.8802.17.1.1.2.1.20,IEEE-802DOT17-RPR-MIB::rprErrorCurrentGroup,,,,,,Collection of objects counting MAC span error current statistics.
.1.0.8802.17.1.1.2.1.21,IEEE-802DOT17-RPR-MIB::rprErrorIntervalGroup,,,,,,Collection of objects counting MAC span error intervals statistics.
.1.0.8802.17.1.1.2.1.22,IEEE-802DOT17-RPR-MIB::rprErrorDayGroup,,,,,,Collection of objects counting MAC span error 24 hours statistics.
.1.0.8802.17.1.1.2.1.23,IEEE-802DOT17-RPR-MIB::rprErrorStatsGroup,,,,,,Collection of objects counting MAC span error total statistics.
.1.0.8802.17.1.1.2.2,IEEE-802DOT17-RPR-MIB::rprCompliances,,,,,,
.1.0.8802.17.1.1.2.2.1,IEEE-802DOT17-RPR-MIB::rprModuleTotalStatsCompliance,,,,,,The compliance statement for agent that support RPR operation with total statistics collections.
.1.3,SNMPv2-SMI::org,,,,,,
.1.3.6,SNMPv2-SMI::dod,,,,,,
.1.3.6.1,SNMPv2-SMI::internet,,,,,,
.1.3.6.1.1,SNMPv2-SMI::directory,,,,,,
.1.3.6.1.2,SNMPv2-SMI::mgmt,,,,,,
.1.3.6.1.2.1,SNMPv2-SMI::mib-2,,,,,,
.1.3.6.1.2.1.1,SNMPv2-MIB::system,,,,,,
.1.3.6.1.2.1.1.1,SNMPv2-MIB::sysDescr,OCTET,read-only,,current,,A textual description of the entity. This value should include the full name and version identification of the system's hardware type, software operating-system, and networking software.
.1.3.6.1.2.1.1.2,SNMPv2-MIB::sysObjectID,OBJECT,read-only,,current,,The vendor's authoritative identification of the network management subsystem contained in the entity. This value is allocated within the SMI enterprises subtree (1.3.6.1.4.1) and provides an easy and unambiguous means for determining `what kind of box' is being managed. For example, if vendor `Flintstones, Inc.' was assigned the subtree 1.3.6.1.4.1.424242, it could assign the identifier 1.3.6.1.4.1.424242.1.1 to its `Fred Router'.
.1.3.6.1.2.1.1.3,SNMPv2-MIB::sysUpTime,TimeTicks,read-only,,current,,The time (in hundredths of a second) since the network management portion of the system was last re-initialized.
.1.3.6.1.2.1.1.4,SNMPv2-MIB::sysContact,OCTET,read-write,,current,,The textual identification of the contact person for this managed node, together with information on how to contact this person. If no contact information is known, the value is the zero-length string.
.1.3.6.1.2.1.1.5,SNMPv2-MIB::sysName,OCTET,read-write,,current,,An administratively-assigned name for this managed node. By convention, this is the node's fully-qualified domain name. If the name is unknown, the value is the zero-length string.
.1.3.6.1.2.1.1.6,SNMPv2-MIB::sysLocation,OCTET,read-write,,current,,The physical location of this node (e.g., 'telephone closet, 3rd floor'). If the location is unknown, the value is the zero-length string.
.1.3.6.1.2.1.1.7,SNMPv2-MIB::sysServices,INTEGER,read-only,,current,,A value which indicates the set of services that this entity may potentially offer. The value is a sum. This sum initially takes the value zero. Then, for each layer, L, in the range 1 through 7, that this node performs transactions for, 2 raised to (L - 1) is added to the sum. For example, a node which performs only routing functions would have a value of 4 (2^(3-1)). In contrast, a node which is a host offering application services would have a value of 72 (2^(4-1) + 2^(7-1)). Note that in the context of the Internet suite of protocols, values should be calculated accordingly: layer functionality 1 physical (e.g., repeaters) 2 datalink/subnetwork (e.g., bridges) 3 internet (e.g., supports the IP) 4 end-to-end (e.g., supports the TCP) 7 applications (e.g., supports the SMTP) For systems including OSI protocols, layers 5 and 6 may also be counted.
.1.3.6.1.2.1.1.8,SNMPv2-MIB::sysORLastChange,TimeTicks,read-only,,current,,The value of sysUpTime at the time of the most recent change in state or value of any instance of sysORID.
.1.3.6.1.2.1.1.9,SNMPv2-MIB::sysORTable,,not-accessible,,current,,The (conceptual) table listing the capabilities of the local SNMP application acting as a command responder with respect to various MIB modules. SNMP entities having dynamically-configurable support of MIB modules will have a dynamically-varying number of conceptual rows.
.1.3.6.1.2.1.1.9.1,SNMPv2-MIB::sysOREntry,,not-accessible,sysORIndex,current,,An entry (conceptual row) in the sysORTable.
.1.3.6.1.2.1.1.9.1.1,SNMPv2-MIB::sysORIndex,INTEGER,not-accessible,,current,,The auxiliary variable used for identifying instances of the columnar objects in the sysORTable.
.1.3.6.1.2.1.1.9.1.2,SNMPv2-MIB::sysORID,OBJECT,read-only,,current,,An authoritative identification of a capabilities statement with respect to various MIB modules supported by the local SNMP application acting as a command responder.
.1.3.6.1.2.1.1.9.1.3,SNMPv2-MIB::sysORDescr,OCTET,read-only,,current,,A textual description of the capabilities identified by the corresponding instance of sysORID.
.1.3.6.1.2.1.1.9.1.4,SNMPv2-MIB::sysORUpTime,TimeTicks,read-only,,current,,The value of sysUpTime at the time this conceptual row was last instantiated.
.1.3.6.1.2.1.2,IF-MIB::interfaces,,,,,,
.1.3.6.1.2.1.2.1,IF-MIB::ifNumber,Integer32,read-only,,current,,The number of network interfaces (regardless of their current state) present on this system.
.1.3.6.1.2.1.2.2,IF-MIB::ifTable,,not-accessible,,current,,A list of interface entries. The number of entries is given by the value of ifNumber.
.1.3.6.1.2.1.2.2.1,IF-MIB::ifEntry,,not-accessible,ifIndex,current,,An entry containing management information applicable to a particular interface.
.1.3.6.1.2.1.2.2.1.1,IF-MIB::ifIndex,Integer32,read-only,,current,,A unique value, greater than zero, for each interface. It is recommended that values are assigned contiguously starting from 1. The value for each interface sub-layer must remain constant at least from one re-initialization of the entity's network management system to the next re- initialization.
.1.3.6.1.2.1.2.2.1.2,IF-MIB::ifDescr,OCTET,read-only,,current,,A textual string containing information about the interface. This string should include the name of the manufacturer, the product name and the version of the interface hardware/software.
.1.3.6.1.2.1.2.2.1.3,IF-MIB::ifType,INTEGER,read-only,,current,other(1):regular1822(2):hdh1822(3):ddnX25(4):rfc877x25(5):ethernetCsmacd(6):iso88023Csmacd(7):iso88024TokenBus(8):iso88025TokenRing(9):iso88026Man(10):starLan(11):proteon10Mbit(12):proteon80Mbit(13):hyperchannel(14):fddi(15):lapb(16):sdlc(17):ds1(18):e1(19):basicISDN(20):primaryISDN(21):propPointToPointSerial(22):ppp(23):softwareLoopback(24):eon(25):ethernet3Mbit(26):nsip(27):slip(28):ultra(29):ds3(30):sip(31):frameRelay(32):rs232(33):para(34):arcnet(35):arcnetPlus(36):atm(37):miox25(38):sonet(39):x25ple(40):iso88022llc(41):localTalk(42):smdsDxi(43):frameRelayService(44):v35(45):hssi(46):hippi(47):modem(48):aal5(49):sonetPath(50):sonetVT(51):smdsIcip(52):propVirtual(53):propMultiplexor(54):ieee80212(55):fibreChannel(56):hippiInterface(57):frameRelayInterconnect(58):aflane8023(59):aflane8025(60):cctEmul(61):fastEther(62):isdn(63):v11(64):v36(65):g703at64k(66):g703at2mb(67):qllc(68):fastEtherFX(69):channel(70):ieee80211(71):ibm370parChan(72):escon(73):dlsw(74):isdns(75):isdnu(76):lapd(77):ipSwitch(78):rsrb(79):atmLogical(80):ds0(81):ds0Bundle(82):bsc(83):async(84):cnr(85):iso88025Dtr(86):eplrs(87):arap(88):propCnls(89):hostPad(90):termPad(91):frameRelayMPI(92):x213(93):adsl(94):radsl(95):sdsl(96):vdsl(97):iso88025CRFPInt(98):myrinet(99):voiceEM(100):voiceFXO(101):voiceFXS(102):voiceEncap(103):voiceOverIp(104):atmDxi(105):atmFuni(106):atmIma(107):pppMultilinkBundle(108):ipOverCdlc(109):ipOverClaw(110):stackToStack(111):virtualIpAddress(112):mpc(113):ipOverAtm(114):iso88025Fiber(115):tdlc(116):gigabitEthernet(117):hdlc(118):lapf(119):v37(120):x25mlp(121):x25huntGroup(122):transpHdlc(123):interleave(124):fast(125):ip(126):docsCableMaclayer(127):docsCableDownstream(128):docsCableUpstream(129):a12MppSwitch(130):tunnel(131):coffee(132):ces(133):atmSubInterface(134):l2vlan(135):l3ipvlan(136):l3ipxvlan(137):digitalPowerline(138):mediaMailOverIp(139):dtm(140):dcn(141):ipForward(142):msdsl(143):ieee1394(144):if-gsn(145):dvbRccMacLayer(146):dvbRccDownstream(147):dvbRccUpstream(148):atmVirtual(149):mplsTunnel(150):srp(151):voiceOverAtm(152):voiceOverFrameRelay(153):idsl(154):compositeLink(155):ss7SigLink(156):propWirelessP2P(157):frForward(158):rfc1483(159):usb(160):ieee8023adLag(161):bgppolicyaccounting(162):frf16MfrBundle(163):h323Gatekeeper(164):h323Proxy(165):mpls(166):mfSigLink(167):hdsl2(168):shdsl(169):ds1FDL(170):pos(171):dvbAsiIn(172):dvbAsiOut(173):plc(174):nfas(175):tr008(176):gr303RDT(177):gr303IDT(178):isup(179):propDocsWirelessMaclayer(180):propDocsWirelessDownstream(181):propDocsWirelessUpstream(182):hiperlan2(183):propBWAp2Mp(184):sonetOverheadChannel(185):digitalWrapperOverheadChannel(186):aal2(187):radioMAC(188):atmRadio(189):imt(190):mvl(191):reachDSL(192):frDlciEndPt(193):atmVciEndPt(194):opticalChannel(195):opticalTransport(196):propAtm(197):voiceOverCable(198):infiniband(199):teLink(200):q2931(201):virtualTg(202):sipTg(203):sipSig(204):docsCableUpstreamChannel(205):econet(206):pon155(207):pon622(208):bridge(209):linegroup(210):voiceEMFGD(211):voiceFGDEANA(212):voiceDID(213):mpegTransport(214):sixToFour(215):gtp(216):pdnEtherLoop1(217):pdnEtherLoop2(218):opticalChannelGroup(219):homepna(220):gfp(221):ciscoISLvlan(222):actelisMetaLOOP(223):fcipLink(224):rpr(225):qam(226):lmp(227):cblVectaStar(228):docsCableMCmtsDownstream(229):adsl2(230):macSecControlledIF(231):macSecUncontrolledIF(232):aviciOpticalEther(233):atmbond(234):voiceFGDOS(235):mocaVersion1(236):ieee80216WMAN(237):adsl2plus(238):dvbRcsMacLayer(239):dvbTdm(240):dvbRcsTdma(241):x86Laps(242):wwanPP(243):wwanPP2(244):voiceEBS(245):ifPwType(246):ilan(247):pip(248):aluELP(249):gpon(250):vdsl2(251):capwapDot11Profile(252):capwapDot11Bss(253):capwapWtpVirtualRadio(254):bits(255):docsCableUpstreamRfPort(256):cableDownstreamRfPort(257):vmwareVirtualNic(258):ieee802154(259):otnOdu(260):otnOtu(261):ifVfiType(262):g9981(263):g9982(264):g9983(265):aluEpon(266):aluEponOnu(267):aluEponPhysicalUni(268):aluEponLogicalLink(269):aluGponOnu(270):aluGponPhysicalUni(271):vmwareNicTeam(272):docsOfdmDownstream(277):docsOfdmaUpstream(278):gfast(279):sdci(280):xboxWireless(281):fastdsl(282):docsCableScte55d1FwdOob(283):docsCableScte55d1RetOob(284):docsCableScte55d2DsOob(285):docsCableScte55d2UsOob(286):docsCableNdf(287):docsCableNdr(288):ptm(289):ghn(290):otnOtsi(291):otnOtuc(292):otnOduc(293):otnOtsig(294):microwaveCarrierTermination(295):microwaveRadioLinkTerminal(296),The type of interface. Additional values for ifType are assigned by the Internet Assigned Numbers Authority (IANA), through updating the syntax of the IANAifType textual convention.
.1.3.6.1.2.1.2.2.1.4,IF-MIB::ifMtu,Integer32,read-only,,current,,The size of the largest packet which can be sent/received on the interface, specified in octets. For interfaces that are used for transmitting network datagrams, this is the size of the largest network datagram that can be sent on the interface.
.1.3.6.1.2.1.2.2.1.5,IF-MIB::ifSpeed,Gauge32,read-only,,current,,An estimate of the interface's current bandwidth in bits per second. For interfaces which do not vary in bandwidth or for those where no accurate estimation can be made, this object should contain the nominal bandwidth. If the bandwidth of the interface is greater than the maximum value reportable by this object then this object should report its maximum value (4,294,967,295) and ifHighSpeed must be used to report the interace's speed. For a sub-layer which has no concept of bandwidth, this object should be zero.
.1.3.6.1.2.1.2.2.1.6,IF-MIB::ifPhysAddress,OCTET,read-only,,current,,The interface's address at its protocol sub-layer. For example, for an 802.x interface, this object normally contains a MAC address. The interface's media-specific MIB must define the bit and byte ordering and the format of the value of this object. For interfaces which do not have such an address (e.g., a serial line), this object should contain an octet string of zero length.
.1.3.6.1.2.1.2.2.1.7,IF-MIB::ifAdminStatus,INTEGER,read-write,,current,up(1):down(2):testing(3),The desired state of the interface. The testing(3) state indicates that no operational packets can be passed. When a managed system initializes, all interfaces start with ifAdminStatus in the down(2) state. As a result of either explicit management action or per configuration information retained by the managed system, ifAdminStatus is then changed to either the up(1) or testing(3) states (or remains in the down(2) state).
.1.3.6.1.2.1.2.2.1.8,IF-MIB::ifOperStatus,INTEGER,read-only,,current,up(1):down(2):testing(3):unknown(4):dormant(5):notPresent(6):lowerLayerDown(7),The current operational state of the interface. The testing(3) state indicates that no operational packets can be passed. If ifAdminStatus is down(2) then ifOperStatus should be down(2). If ifAdminStatus is changed to up(1) then ifOperStatus should change to up(1) if the interface is ready to transmit and receive network traffic; it should change to dormant(5) if the interface is waiting for external actions (such as a serial line waiting for an incoming connection); it should remain in the down(2) state if and only if there is a fault that prevents it from going to the up(1) state; it should remain in the notPresent(6) state if the interface has missing (typically, hardware) components.
.1.3.6.1.2.1.2.2.1.9,IF-MIB::ifLastChange,TimeTicks,read-only,,current,,The value of sysUpTime at the time the interface entered its current operational state. If the current state was entered prior to the last re-initialization of the local network management subsystem, then this object contains a zero value.
.1.3.6.1.2.1.2.2.1.10,IF-MIB::ifInOctets,Counter32,read-only,,current,,The total number of octets received on the interface, including framing characters. Discontinuities in the value of this counter can occur at re-initialization of the management system, and at other times as indicated by the value of ifCounterDiscontinuityTime.
.1.3.6.1.2.1.2.2.1.11,IF-MIB::ifInUcastPkts,Counter32,read-only,,current,,The number of packets, delivered by this sub-layer to a higher (sub-)layer, which were not addressed to a multicast or broadcast address at this sub-layer. Discontinuities in the value of this counter can occur at re-initialization of the management system, and at other times as indicated by the value of ifCounterDiscontinuityTime.
.1.3.6.1.2.1.2.2.1.12,IF-MIB::ifInNUcastPkts,Counter32,read-only,,deprecated,,The number of packets, delivered by this sub-layer to a higher (sub-)layer, which were addressed to a multicast or broadcast address at this sub-layer. Discontinuities in the value of this counter can occur at re-initialization of the management system, and at other times as indicated by the value of ifCounterDiscontinuityTime. This object is deprecated in favour of ifInMulticastPkts and ifInBroadcastPkts.
.1.3.6.1.2.1.2.2.1.13,IF-MIB::ifInDiscards,Counter32,read-only,,current,,The number of inbound packets which were chosen to be discarded even though no errors had been detected to prevent their being deliverable to a higher-layer protocol. One possible reason for discarding such a packet could be to free up buffer space. Discontinuities in the value of this counter can occur at re-initialization of the management system, and at other times as indicated by the value of ifCounterDiscontinuityTime.
.1.3.6.1.2.1.2.2.1.14,IF-MIB::ifInErrors,Counter32,read-only,,current,,For packet-oriented interfaces, the number of inbound packets that contained errors preventing them from being deliverable to a higher-layer protocol. For character- oriented or fixed-length interfaces, the number of inbound transmission units that contained errors preventing them from being deliverable to a higher-layer protocol. Discontinuities in the value of this counter can occur at re-initialization of the management system, and at other times as indicated by the value of ifCounterDiscontinuityTime.
.1.3.6.1.2.1.2.2.1.15,IF-MIB::ifInUnknownProtos,Counter32,read-only,,current,,For packet-oriented interfaces, the number of packets received via the interface which were discarded because of an unknown or unsupported protocol. For character-oriented or fixed-length interfaces that support protocol multiplexing the number of transmission units received via the interface which were discarded because of an unknown or unsupported protocol. For any interface that does not support protocol multiplexing, this counter will always be 0. Discontinuities in the value of this counter can occur at re-initialization of the management system, and at other times as indicated by the value of ifCounterDiscontinuityTime.
.1.3.6.1.2.1.2.2.1.16,IF-MIB::ifOutOctets,Counter32,read-only,,current,,The total number of octets transmitted out of the interface, including framing characters. Discontinuities in the value of this counter can occur at re-initialization of the management system, and at other times as indicated by the value of ifCounterDiscontinuityTime.
.1.3.6.1.2.1.2.2.1.17,IF-MIB::ifOutUcastPkts,Counter32,read-only,,current,,The total number of packets that higher-level protocols requested be transmitted, and which were not addressed to a multicast or broadcast address at this sub-layer, including those that were discarded or not sent. Discontinuities in the value of this counter can occur at re-initialization of the management system, and at other times as indicated by the value of ifCounterDiscontinuityTime.
.1.3.6.1.2.1.2.2.1.18,IF-MIB::ifOutNUcastPkts,Counter32,read-only,,deprecated,,The total number of packets that higher-level protocols requested be transmitted, and which were addressed to a multicast or broadcast address at this sub-layer, including those that were discarded or not sent. Discontinuities in the value of this counter can occur at re-initialization of the management system, and at other times as indicated by the value of ifCounterDiscontinuityTime. This object is deprecated in favour of ifOutMulticastPkts and ifOutBroadcastPkts.
.1.3.6.1.2.1.2.2.1.19,IF-MIB::ifOutDiscards,Counter32,read-only,,current,,The number of outbound packets which were chosen to be discarded even though no errors had been detected to prevent their being transmitted. One possible reason for discarding such a packet could be to free up buffer space. Discontinuities in the value of this counter can occur at re-initialization of the management system, and at other times as indicated by the value of ifCounterDiscontinuityTime.
.1.3.6.1.2.1.2.2.1.20,IF-MIB::ifOutErrors,Counter32,read-only,,current,,For packet-oriented interfaces, the number of outbound packets that could not be transmitted because of errors. For character-oriented or fixed-length interfaces, the number of outbound transmission units that could not be transmitted because of errors. Discontinuities in the value of this counter can occur at re-initialization of the management system, and at other times as indicated by the value of ifCounterDiscontinuityTime.
.1.3.6.1.2.1.2.2.1.21,IF-MIB::ifOutQLen,Gauge32,read-only,,deprecated,,The length of the output packet queue (in packets).
.1.3.6.1.2.1.2.2.1.22,IF-MIB::ifSpecific,OBJECT,read-only,,deprecated,,A reference to MIB definitions specific to the particular media being used to realize the interface. It is recommended that this value point to an instance of a MIB object in the media-specific MIB, i.e., that this object have the semantics associated with the InstancePointer textual convention defined in RFC 2579. In fact, it is recommended that the media-specific MIB specify what value ifSpecific should/can take for values of ifType. If no MIB definitions specific to the particular media are available, the value should be set to the OBJECT IDENTIFIER { 0 0 }.
.1.3.6.1.2.1.3,RFC1213-MIB::at,,,,,,
.1.3.6.1.2.1.3.1,RFC1213-MIB::atTable,,not-accessible,,deprecated,,The Address Translation tables contain the NetworkAddress to `physical' address equivalences. Some interfaces do not use translation tables for determining address equivalences (e.g., DDN-X.25 has an algorithmic method); if all interfaces are of this type, then the Address Translation table is empty, i.e., has zero entries.
.1.3.6.1.2.1.3.1.1,RFC1213-MIB::atEntry,,not-accessible,atIfIndex:atNetAddress,deprecated,,Each entry contains one NetworkAddress to `physical' address equivalence.
.1.3.6.1.2.1.3.1.1.1,RFC1213-MIB::atIfIndex,INTEGER,read-write,,deprecated,,The interface on which this entry's equivalence is effective. The interface identified by a particular value of this index is the same interface as identified by the same value of ifIndex.
.1.3.6.1.2.1.3.1.1.2,RFC1213-MIB::atPhysAddress,OCTET,read-write,,deprecated,,The media-dependent `physical' address. Setting this object to a null string (one of zero length) has the effect of invaliding the corresponding entry in the atTable object. That is, it effectively dissasociates the interface identified with said entry from the mapping identified with said entry. It is an implementation-specific matter as to whether the agent removes an invalidated entry from the table. Accordingly, management stations must be prepared to receive tabular information from agents that corresponds to entries not currently in use. Proper interpretation of such entries requires examination of the relevant atPhysAddress object.
.1.3.6.1.2.1.3.1.1.3,RFC1213-MIB::atNetAddress,NetworkAddress,read-write,,deprecated,,The NetworkAddress (e.g., the IP address) corresponding to the media-dependent `physical' address.
.1.3.6.1.2.1.4,RFC1213-MIB::ip,,,,,,
.1.3.6.1.2.1.4.1,RFC1213-MIB::ipForwarding,INTEGER,read-write,,mandatory,forwarding(1):not-forwarding(2),The indication of whether this entity is acting as an IP gateway in respect to the forwarding of datagrams received by, but not addressed to, this entity. IP gateways forward datagrams. IP hosts do not (except those source-routed via the host). Note that for some managed nodes, this object may take on only a subset of the values possible. Accordingly, it is appropriate for an agent to return a `badValue' response if a management station attempts to change this object to an inappropriate value.
.1.3.6.1.2.1.4.2,RFC1213-MIB::ipDefaultTTL,INTEGER,read-write,,mandatory,,The default value inserted into the Time-To-Live field of the IP header of datagrams originated at this entity, whenever a TTL value is not supplied by the transport layer protocol.
.1.3.6.1.2.1.4.3,RFC1213-MIB::ipInReceives,Counter32,read-only,,mandatory,,The total number of input datagrams received from interfaces, including those received in error.
.1.3.6.1.2.1.4.4,RFC1213-MIB::ipInHdrErrors,Counter32,read-only,,mandatory,,The number of input datagrams discarded due to errors in their IP headers, including bad checksums, version number mismatch, other format errors, time-to-live exceeded, errors discovered in processing their IP options, etc.
.1.3.6.1.2.1.4.5,RFC1213-MIB::ipInAddrErrors,Counter32,read-only,,mandatory,,The number of input datagrams discarded because the IP address in their IP header's destination field was not a valid address to be received at this entity. This count includes invalid addresses (e.g., 0.0.0.0) and addresses of unsupported Classes (e.g., Class E). For entities which are not IP Gateways and therefore do not forward datagrams, this counter includes datagrams discarded because the destination address was not a local address.
.1.3.6.1.2.1.4.6,RFC1213-MIB::ipForwDatagrams,Counter32,read-only,,mandatory,,The number of input datagrams for which this entity was not their final IP destination, as a result of which an attempt was made to find a route to forward them to that final destination. In entities which do not act as IP Gateways, this counter will include only those packets which were Source-Routed via this entity, and the Source- Route option processing was successful.
.1.3.6.1.2.1.4.7,RFC1213-MIB::ipInUnknownProtos,Counter32,read-only,,mandatory,,The number of locally-addressed datagrams received successfully but discarded because of an unknown or unsupported protocol.
.1.3.6.1.2.1.4.8,RFC1213-MIB::ipInDiscards,Counter32,read-only,,mandatory,,The number of input IP datagrams for which no problems were encountered to prevent their continued processing, but which were discarded (e.g., for lack of buffer space). Note that this counter does not include any datagrams discarded while awaiting re-assembly.
.1.3.6.1.2.1.4.9,RFC1213-MIB::ipInDelivers,Counter32,read-only,,mandatory,,The total number of input datagrams successfully delivered to IP user-protocols (including ICMP).
.1.3.6.1.2.1.4.10,RFC1213-MIB::ipOutRequests,Counter32,read-only,,mandatory,,The total number of IP datagrams which local IP user-protocols (including ICMP) supplied to IP in requests for transmission. Note that this counter does not include any datagrams counted in ipForwDatagrams.
.1.3.6.1.2.1.4.11,RFC1213-MIB::ipOutDiscards,Counter32,read-only,,mandatory,,The number of output IP datagrams for which no problem was encountered to prevent their transmission to their destination, but which were discarded (e.g., for lack of buffer space). Note that this counter would include datagrams counted in ipForwDatagrams if any such packets met this (discretionary) discard criterion.
.1.3.6.1.2.1.4.12,RFC1213-MIB::ipOutNoRoutes,Counter32,read-only,,mandatory,,The number of IP datagrams discarded because no route could be found to transmit them to their destination. Note that this counter includes any packets counted in ipForwDatagrams which meet this `no-route' criterion. Note that this includes any datagarms which a host cannot route because all of its default gateways are down.
.1.3.6.1.2.1.4.13,RFC1213-MIB::ipReasmTimeout,INTEGER,read-only,,mandatory,,The maximum number of seconds which received fragments are held while they are awaiting reassembly at this entity.
.1.3.6.1.2.1.4.14,RFC1213-MIB::ipReasmReqds,Counter32,read-only,,mandatory,,The number of IP fragments received which needed to be reassembled at this entity.
.1.3.6.1.2.1.4.15,RFC1213-MIB::ipReasmOKs,Counter32,read-only,,mandatory,,The number of IP datagrams successfully re- assembled.
.1.3.6.1.2.1.4.16,RFC1213-MIB::ipReasmFails,Counter32,read-only,,mandatory,,The number of failures detected by the IP re- assembly algorithm (for whatever reason: timed out, errors, etc). Note that this is not necessarily a count of discarded IP fragments since some algorithms (notably the algorithm in RFC 815) can lose track of the number of fragments by combining them as they are received.
.1.3.6.1.2.1.4.17,RFC1213-MIB::ipFragOKs,Counter32,read-only,,mandatory,,The number of IP datagrams that have been successfully fragmented at this entity.
.1.3.6.1.2.1.4.18,RFC1213-MIB::ipFragFails,Counter32,read-only,,mandatory,,The number of IP datagrams that have been discarded because they needed to be fragmented at this entity but could not be, e.g., because their Don't Fragment flag was set.
.1.3.6.1.2.1.4.19,RFC1213-MIB::ipFragCreates,Counter32,read-only,,mandatory,,The number of IP datagram fragments that have been generated as a result of fragmentation at this entity.
.1.3.6.1.2.1.4.20,RFC1213-MIB::ipAddrTable,,not-accessible,,mandatory,,The table of addressing information relevant to this entity's IP addresses.
.1.3.6.1.2.1.4.20.1,RFC1213-MIB::ipAddrEntry,,not-accessible,ipAdEntAddr,mandatory,,The addressing information for one of this entity's IP addresses.
.1.3.6.1.2.1.4.20.1.1,RFC1213-MIB::ipAdEntAddr,IpAddress,read-only,,mandatory,,The IP address to which this entry's addressing information pertains.
.1.3.6.1.2.1.4.20.1.2,RFC1213-MIB::ipAdEntIfIndex,INTEGER,read-only,,mandatory,,The index value which uniquely identifies the interface to which this entry is applicable. The interface identified by a particular value of this index is the same interface as identified by the same value of ifIndex.
.1.3.6.1.2.1.4.20.1.3,RFC1213-MIB::ipAdEntNetMask,IpAddress,read-only,,mandatory,,The subnet mask associated with the IP address of this entry. The value of the mask is an IP address with all the network bits set to 1 and all the hosts bits set to 0.
.1.3.6.1.2.1.4.20.1.4,RFC1213-MIB::ipAdEntBcastAddr,INTEGER,read-only,,mandatory,,The value of the least-significant bit in the IP broadcast address used for sending datagrams on the (logical) interface associated with the IP address of this entry. For example, when the Internet standard all-ones broadcast address is used, the value will be 1. This value applies to both the subnet and network broadcasts addresses used by the entity on this (logical) interface.
.1.3.6.1.2.1.4.20.1.5,RFC1213-MIB::ipAdEntReasmMaxSize,INTEGER,read-only,,mandatory,,The size of the largest IP datagram which this entity can re-assemble from incoming IP fragmented datagrams received on this interface.
.1.3.6.1.2.1.4.21,RFC1213-MIB::ipRouteTable,,not-accessible,,mandatory,,This entity's IP Routing table.
.1.3.6.1.2.1.4.21.1,RFC1213-MIB::ipRouteEntry,,not-accessible,ipRouteDest,mandatory,,A route to a particular destination.
.1.3.6.1.2.1.4.21.1.1,RFC1213-MIB::ipRouteDest,IpAddress,read-write,,mandatory,,The destination IP address of this route. An entry with a value of 0.0.0.0 is considered a default route. Multiple routes to a single destination can appear in the table, but access to such multiple entries is dependent on the table- access mechanisms defined by the network management protocol in use.
.1.3.6.1.2.1.4.21.1.2,RFC1213-MIB::ipRouteIfIndex,INTEGER,read-write,,mandatory,,The index value which uniquely identifies the local interface through which the next hop of this route should be reached. The interface identified by a particular value of this index is the same interface as identified by the same value of ifIndex.
.1.3.6.1.2.1.4.21.1.3,RFC1213-MIB::ipRouteMetric1,INTEGER,read-write,,mandatory,,The primary routing metric for this route. The semantics of this metric are determined by the routing-protocol specified in the route's ipRouteProto value. If this metric is not used, its value should be set to -1.
.1.3.6.1.2.1.4.21.1.4,RFC1213-MIB::ipRouteMetric2,INTEGER,read-write,,mandatory,,An alternate routing metric for this route. The semantics of this metric are determined by the routing-protocol specified in the route's ipRouteProto value. If this metric is not used, its value should be set to -1.
.1.3.6.1.2.1.4.21.1.5,RFC1213-MIB::ipRouteMetric3,INTEGER,read-write,,mandatory,,An alternate routing metric for this route. The semantics of this metric are determined by the routing-protocol specified in the route's ipRouteProto value. If this metric is not used, its value should be set to -1.
.1.3.6.1.2.1.4.21.1.6,RFC1213-MIB::ipRouteMetric4,INTEGER,read-write,,mandatory,,An alternate routing metric for this route. The semantics of this metric are determined by the routing-protocol specified in the route's ipRouteProto value. If this metric is not used, its value should be set to -1.
.1.3.6.1.2.1.4.21.1.7,RFC1213-MIB::ipRouteNextHop,IpAddress,read-write,,mandatory,,The IP address of the next hop of this route. (In the case of a route bound to an interface which is realized via a broadcast media, the value of this field is the agent's IP address on that interface.)
.1.3.6.1.2.1.4.21.1.8,RFC1213-MIB::ipRouteType,INTEGER,read-write,,mandatory,other(1):invalid(2):direct(3):indirect(4),The type of route. Note that the values direct(3) and indirect(4) refer to the notion of direct and indirect routing in the IP architecture. Setting this object to the value invalid(2) has the effect of invalidating the corresponding entry in the ipRouteTable object. That is, it effectively dissasociates the destination identified with said entry from the route identified with said entry. It is an implementation-specific matter as to whether the agent removes an invalidated entry from the table. Accordingly, management stations must be prepared to receive tabular information from agents that corresponds to entries not currently in use. Proper interpretation of such entries requires examination of the relevant ipRouteType object.
.1.3.6.1.2.1.4.21.1.9,RFC1213-MIB::ipRouteProto,INTEGER,read-only,,mandatory,other(1):local(2):netmgmt(3):icmp(4):egp(5):ggp(6):hello(7):rip(8):is-is(9):es-is(10):ciscoIgrp(11):bbnSpfIgp(12):ospf(13):bgp(14),The routing mechanism via which this route was learned. Inclusion of values for gateway routing protocols is not intended to imply that hosts should support those protocols.
.1.3.6.1.2.1.4.21.1.10,RFC1213-MIB::ipRouteAge,INTEGER,read-write,,mandatory,,The number of seconds since this route was last updated or otherwise determined to be correct. Note that no semantics of `too old' can be implied except through knowledge of the routing protocol by which the route was learned.
.1.3.6.1.2.1.4.21.1.11,RFC1213-MIB::ipRouteMask,IpAddress,read-write,,mandatory,,Indicate the mask to be logical-ANDed with the destination address before being compared to the value in the ipRouteDest field. For those systems that do not support arbitrary subnet masks, an agent constructs the value of the ipRouteMask by determining whether the value of the correspondent ipRouteDest field belong to a class-A, B, or C network, and then using one of: mask network 255.0.0.0 class-A 255.255.0.0 class-B 255.255.255.0 class-C If the value of the ipRouteDest is 0.0.0.0 (a default route), then the mask value is also 0.0.0.0. It should be noted that all IP routing subsystems implicitly use this mechanism.
.1.3.6.1.2.1.4.21.1.12,RFC1213-MIB::ipRouteMetric5,INTEGER,read-write,,mandatory,,An alternate routing metric for this route. The semantics of this metric are determined by the routing-protocol specified in the route's ipRouteProto value. If this metric is not used, its value should be set to -1.
.1.3.6.1.2.1.4.21.1.13,RFC1213-MIB::ipRouteInfo,OBJECT,read-only,,mandatory,,A reference to MIB definitions specific to the particular routing protocol which is responsible for this route, as determined by the value specified in the route's ipRouteProto value. If this information is not present, its value should be set to the OBJECT IDENTIFIER { 0 0 }, which is a syntatically valid object identifier, and any conformant implementation of ASN.1 and BER must be able to generate and recognize this value.
.1.3.6.1.2.1.4.22,RFC1213-MIB::ipNetToMediaTable,,not-accessible,,mandatory,,The IP Address Translation table used for mapping from IP addresses to physical addresses.
.1.3.6.1.2.1.4.22.1,RFC1213-MIB::ipNetToMediaEntry,,not-accessible,ipNetToMediaIfIndex:ipNetToMediaNetAddress,mandatory,,Each entry contains one IpAddress to `physical' address equivalence.
.1.3.6.1.2.1.4.22.1.1,RFC1213-MIB::ipNetToMediaIfIndex,INTEGER,read-write,,mandatory,,The interface on which this entry's equivalence is effective. The interface identified by a particular value of this index is the same interface as identified by the same value of ifIndex.
.1.3.6.1.2.1.4.22.1.2,RFC1213-MIB::ipNetToMediaPhysAddress,OCTET,read-write,,mandatory,,The media-dependent `physical' address.
.1.3.6.1.2.1.4.22.1.3,RFC1213-MIB::ipNetToMediaNetAddress,IpAddress,read-write,,mandatory,,The IpAddress corresponding to the media- dependent `physical' address.
.1.3.6.1.2.1.4.22.1.4,RFC1213-MIB::ipNetToMediaType,INTEGER,read-write,,mandatory,other(1):invalid(2):dynamic(3):static(4),The type of mapping. Setting this object to the value invalid(2) has the effect of invalidating the corresponding entry in the ipNetToMediaTable. That is, it effectively dissasociates the interface identified with said entry from the mapping identified with said entry. It is an implementation-specific matter as to whether the agent removes an invalidated entry from the table. Accordingly, management stations must be prepared to receive tabular information from agents that corresponds to entries not currently in use. Proper interpretation of such entries requires examination of the relevant ipNetToMediaType object.
.1.3.6.1.2.1.4.23,RFC1213-MIB::ipRoutingDiscards,Counter32,read-only,,mandatory,,The number of routing entries which were chosen to be discarded even though they are valid. One possible reason for discarding such an entry could be to free-up buffer space for other routing entries.
.1.3.6.1.2.1.4.24,IP-FORWARD-MIB::ipForward,,,,,,The MIB module for the management of CIDR multipath IP Routes. Copyright (C) The Internet Society (2006). This version of this MIB module is a part of RFC 4292; see the RFC itself for full legal notices.
.1.3.6.1.2.1.4.24.1,IP-FORWARD-MIB::ipForwardNumber,Gauge32,read-only,,obsolete,,The number of current ipForwardTable entries that are not invalid.
.1.3.6.1.2.1.4.24.2,IP-FORWARD-MIB::ipForwardTable,,not-accessible,,obsolete,,This entity's IP Routing table.
.1.3.6.1.2.1.4.24.2.1,IP-FORWARD-MIB::ipForwardEntry,,not-accessible,ipForwardDest:ipForwardProto:ipForwardPolicy:ipForwardNextHop,obsolete,,A particular route to a particular destination, under a particular policy.
.1.3.6.1.2.1.4.24.2.1.1,IP-FORWARD-MIB::ipForwardDest,IpAddress,read-only,,obsolete,,The destination IP address of this route. An entry with a value of 0.0.0.0 is considered a default route. This object may not take a Multicast (Class D) address value. Any assignment (implicit or otherwise) of an instance of this object to a value x must be rejected if the bitwise logical-AND of x with the value of the corresponding instance of the ipForwardMask object is not equal to x.
.1.3.6.1.2.1.4.24.2.1.2,IP-FORWARD-MIB::ipForwardMask,IpAddress,read-create,,obsolete,,Indicate the mask to be logical-ANDed with the destination address before being compared to the value in the ipForwardDest field. For those systems that do not support arbitrary subnet masks, an agent constructs the value of the ipForwardMask by reference to the IP Address Class. Any assignment (implicit or otherwise) of an instance of this object to a value x must be rejected if the bitwise logical-AND of x with the value of the corresponding instance of the ipForwardDest object is not equal to ipForwardDest.
.1.3.6.1.2.1.4.24.2.1.3,IP-FORWARD-MIB::ipForwardPolicy,Integer32,read-only,,obsolete,,The general set of conditions that would cause the selection of one multipath route (set of next hops for a given destination) is referred to as 'policy'. Unless the mechanism indicated by ipForwardProto specifies otherwise, the policy specifier is the IP TOS Field. The encoding of IP TOS is as specified by the following convention. Zero indicates the default path if no more specific policy applies. +-----+-----+-----+-----+-----+-----+-----+-----+ | | | | | PRECEDENCE | TYPE OF SERVICE | 0 | | | | | +-----+-----+-----+-----+-----+-----+-----+-----+ IP TOS IP TOS Field Policy Field Policy Contents Code Contents Code 0 0 0 0 ==> 0 0 0 0 1 ==> 2 0 0 1 0 ==> 4 0 0 1 1 ==> 6 0 1 0 0 ==> 8 0 1 0 1 ==> 10 0 1 1 0 ==> 12 0 1 1 1 ==> 14 1 0 0 0 ==> 16 1 0 0 1 ==> 18 1 0 1 0 ==> 20 1 0 1 1 ==> 22 1 1 0 0 ==> 24 1 1 0 1 ==> 26 1 1 1 0 ==> 28 1 1 1 1 ==> 30 Protocols defining 'policy' otherwise must either define a set of values that are valid for this object or must implement an integer-instanced policy table for which this object's value acts as an index.
.1.3.6.1.2.1.4.24.2.1.4,IP-FORWARD-MIB::ipForwardNextHop,IpAddress,read-only,,obsolete,,On remote routes, the address of the next system en route; otherwise, 0.0.0.0.
.1.3.6.1.2.1.4.24.2.1.5,IP-FORWARD-MIB::ipForwardIfIndex,Integer32,read-create,,obsolete,,The ifIndex value that identifies the local interface through which the next hop of this route should be reached.
.1.3.6.1.2.1.4.24.2.1.6,IP-FORWARD-MIB::ipForwardType,INTEGER,read-create,,obsolete,other(1):invalid(2):local(3):remote(4),The type of route. Note that local(3) refers to a route for which the next hop is the final destination; remote(4) refers to a route for which the next hop is not the final destination. Setting this object to the value invalid(2) has the effect of invalidating the corresponding entry in the ipForwardTable object. That is, it effectively disassociates the destination identified with said entry from the route identified with said entry. It is an implementation-specific matter as to whether the agent removes an invalidated entry from the table. Accordingly, management stations must be prepared to receive tabular information from agents that corresponds to entries not currently in use. Proper interpretation of such entries requires examination of the relevant ipForwardType object.
.1.3.6.1.2.1.4.24.2.1.7,IP-FORWARD-MIB::ipForwardProto,INTEGER,read-only,,obsolete,other(1):local(2):netmgmt(3):icmp(4):egp(5):ggp(6):hello(7):rip(8):is-is(9):es-is(10):ciscoIgrp(11):bbnSpfIgp(12):ospf(13):bgp(14):idpr(15),The routing mechanism via which this route was learned. Inclusion of values for gateway routing protocols is not intended to imply that hosts should support those protocols.
.1.3.6.1.2.1.4.24.2.1.8,IP-FORWARD-MIB::ipForwardAge,Integer32,read-only,,obsolete,,The number of seconds since this route was last updated or otherwise determined to be correct. Note that no semantics of `too old' can be implied except through knowledge of the routing protocol by which the route was learned.
.1.3.6.1.2.1.4.24.2.1.9,IP-FORWARD-MIB::ipForwardInfo,OBJECT,read-create,,obsolete,,A reference to MIB definitions specific to the particular routing protocol that is responsible for this route, as determined by the value specified in the route's ipForwardProto value. If this information is not present, its value should be set to the OBJECT IDENTIFIER { 0 0 }, which is a syntactically valid object identifier, and any implementation conforming to ASN.1 and the Basic Encoding Rules must be able to generate and recognize this value.
.1.3.6.1.2.1.4.24.2.1.10,IP-FORWARD-MIB::ipForwardNextHopAS,Integer32,read-create,,obsolete,,The Autonomous System Number of the Next Hop. When this is unknown or not relevant to the protocol indicated by ipForwardProto, zero.
.1.3.6.1.2.1.4.24.2.1.11,IP-FORWARD-MIB::ipForwardMetric1,Integer32,read-create,,obsolete,,The primary routing metric for this route. The semantics of this metric are determined by the routing- protocol specified in the route's ipForwardProto value. If this metric is not used, its value should be set to -1.
.1.3.6.1.2.1.4.24.2.1.12,IP-FORWARD-MIB::ipForwardMetric2,Integer32,read-create,,obsolete,,An alternate routing metric for this route. The semantics of this metric are determined by the routing- protocol specified in the route's ipForwardProto value. If this metric is not used, its value should be set to -1.
.1.3.6.1.2.1.4.24.2.1.13,IP-FORWARD-MIB::ipForwardMetric3,Integer32,read-create,,obsolete,,An alternate routing metric for this route. The semantics of this metric are determined by the routing- protocol specified in the route's ipForwardProto value. If this metric is not used, its value should be set to -1.
.1.3.6.1.2.1.4.24.2.1.14,IP-FORWARD-MIB::ipForwardMetric4,Integer32,read-create,,obsolete,,An alternate routing metric for this route. The semantics of this metric are determined by the routing- protocol specified in the route's ipForwardProto value. If this metric is not used, its value should be set to -1.
.1.3.6.1.2.1.4.24.2.1.15,IP-FORWARD-MIB::ipForwardMetric5,Integer32,read-create,,obsolete,,An alternate routing metric for this route. The semantics of this metric are determined by the routing- protocol specified in the route's ipForwardProto value. If this metric is not used, its value should be set to -1.
.1.3.6.1.2.1.4.24.3,IP-FORWARD-MIB::ipCidrRouteNumber,Gauge32,read-only,,deprecated,,The number of current ipCidrRouteTable entries that are not invalid. This object is deprecated in favor of inetCidrRouteNumber and the inetCidrRouteTable.
.1.3.6.1.2.1.4.24.4,IP-FORWARD-MIB::ipCidrRouteTable,,not-accessible,,deprecated,,This entity's IP Routing table. This table has been deprecated in favor of the IP version neutral inetCidrRouteTable.
.1.3.6.1.2.1.4.24.4.1,IP-FORWARD-MIB::ipCidrRouteEntry,,not-accessible,ipCidrRouteDest:ipCidrRouteMask:ipCidrRouteTos:ipCidrRouteNextHop,deprecated,,A particular route to a particular destination, under a particular policy.
.1.3.6.1.2.1.4.24.4.1.1,IP-FORWARD-MIB::ipCidrRouteDest,IpAddress,read-only,,deprecated,,The destination IP address of this route. This object may not take a Multicast (Class D) address value. Any assignment (implicit or otherwise) of an instance of this object to a value x must be rejected if the bitwise logical-AND of x with the value of the corresponding instance of the ipCidrRouteMask object is not equal to x.
.1.3.6.1.2.1.4.24.4.1.2,IP-FORWARD-MIB::ipCidrRouteMask,IpAddress,read-only,,deprecated,,Indicate the mask to be logical-ANDed with the destination address before being compared to the value in the ipCidrRouteDest field. For those systems that do not support arbitrary subnet masks, an agent constructs the value of the ipCidrRouteMask by reference to the IP Address Class. Any assignment (implicit or otherwise) of an instance of this object to a value x must be rejected if the bitwise logical-AND of x with the value of the corresponding instance of the ipCidrRouteDest object is not equal to ipCidrRouteDest.
.1.3.6.1.2.1.4.24.4.1.3,IP-FORWARD-MIB::ipCidrRouteTos,Integer32,read-only,,deprecated,,The policy specifier is the IP TOS Field. The encoding of IP TOS is as specified by the following convention. Zero indicates the default path if no more specific policy applies. +-----+-----+-----+-----+-----+-----+-----+-----+ | | | | | PRECEDENCE | TYPE OF SERVICE | 0 | | | | | +-----+-----+-----+-----+-----+-----+-----+-----+ IP TOS IP TOS Field Policy Field Policy Contents Code Contents Code 0 0 0 0 ==> 0 0 0 0 1 ==> 2 0 0 1 0 ==> 4 0 0 1 1 ==> 6 0 1 0 0 ==> 8 0 1 0 1 ==> 10 0 1 1 0 ==> 12 0 1 1 1 ==> 14 1 0 0 0 ==> 16 1 0 0 1 ==> 18 1 0 1 0 ==> 20 1 0 1 1 ==> 22 1 1 0 0 ==> 24 1 1 0 1 ==> 26 1 1 1 0 ==> 28 1 1 1 1 ==> 30
.1.3.6.1.2.1.4.24.4.1.4,IP-FORWARD-MIB::ipCidrRouteNextHop,IpAddress,read-only,,deprecated,,On remote routes, the address of the next system en route; Otherwise, 0.0.0.0.
.1.3.6.1.2.1.4.24.4.1.5,IP-FORWARD-MIB::ipCidrRouteIfIndex,Integer32,read-create,,deprecated,,The ifIndex value that identifies the local interface through which the next hop of this route should be reached.
.1.3.6.1.2.1.4.24.4.1.6,IP-FORWARD-MIB::ipCidrRouteType,INTEGER,read-create,,deprecated,other(1):reject(2):local(3):remote(4),The type of route. Note that local(3) refers to a route for which the next hop is the final destination; remote(4) refers to a route for which the next hop is not the final destination. Routes that do not result in traffic forwarding or rejection should not be displayed, even if the implementation keeps them stored internally. reject (2) refers to a route that, if matched, discards the message as unreachable. This is used in some protocols as a means of correctly aggregating routes.
.1.3.6.1.2.1.4.24.4.1.7,IP-FORWARD-MIB::ipCidrRouteProto,INTEGER,read-only,,deprecated,other(1):local(2):netmgmt(3):icmp(4):egp(5):ggp(6):hello(7):rip(8):isIs(9):esIs(10):ciscoIgrp(11):bbnSpfIgp(12):ospf(13):bgp(14):idpr(15):ciscoEigrp(16),The routing mechanism via which this route was learned. Inclusion of values for gateway routing protocols is not intended to imply that hosts should support those protocols.
.1.3.6.1.2.1.4.24.4.1.8,IP-FORWARD-MIB::ipCidrRouteAge,Integer32,read-only,,deprecated,,The number of seconds since this route was last updated or otherwise determined to be correct. Note that no semantics of `too old' can be implied, except through knowledge of the routing protocol by which the route was learned.
.1.3.6.1.2.1.4.24.4.1.9,IP-FORWARD-MIB::ipCidrRouteInfo,OBJECT,read-create,,deprecated,,A reference to MIB definitions specific to the particular routing protocol that is responsible for this route, as determined by the value specified in the route's ipCidrRouteProto value. If this information is not present, its value should be set to the OBJECT IDENTIFIER { 0 0 }, which is a syntactically valid object identifier, and any implementation conforming to ASN.1 and the Basic Encoding Rules must be able to generate and recognize this value.
.1.3.6.1.2.1.4.24.4.1.10,IP-FORWARD-MIB::ipCidrRouteNextHopAS,Integer32,read-create,,deprecated,,The Autonomous System Number of the Next Hop. The semantics of this object are determined by the routing- protocol specified in the route's ipCidrRouteProto value. When this object is unknown or not relevant, its value should be set to zero.
.1.3.6.1.2.1.4.24.4.1.11,IP-FORWARD-MIB::ipCidrRouteMetric1,Integer32,read-create,,deprecated,,The primary routing metric for this route. The semantics of this metric are determined by the routing- protocol specified in the route's ipCidrRouteProto value. If this metric is not used, its value should be set to -1.
.1.3.6.1.2.1.4.24.4.1.12,IP-FORWARD-MIB::ipCidrRouteMetric2,Integer32,read-create,,deprecated,,An alternate routing metric for this route. The semantics of this metric are determined by the routing- protocol specified in the route's ipCidrRouteProto value. If this metric is not used, its value should be set to -1.
.1.3.6.1.2.1.4.24.4.1.13,IP-FORWARD-MIB::ipCidrRouteMetric3,Integer32,read-create,,deprecated,,An alternate routing metric for this route. The semantics of this metric are determined by the routing- protocol specified in the route's ipCidrRouteProto value. If this metric is not used, its value should be set to -1.
.1.3.6.1.2.1.4.24.4.1.14,IP-FORWARD-MIB::ipCidrRouteMetric4,Integer32,read-create,,deprecated,,An alternate routing metric for this route. The semantics of this metric are determined by the routing- protocol specified in the route's ipCidrRouteProto value. If this metric is not used, its value should be set to -1.
.1.3.6.1.2.1.4.24.4.1.15,IP-FORWARD-MIB::ipCidrRouteMetric5,Integer32,read-create,,deprecated,,An alternate routing metric for this route. The semantics of this metric are determined by the routing- protocol specified in the route's ipCidrRouteProto value. If this metric is not used, its value should be set to -1.
.1.3.6.1.2.1.4.24.4.1.16,IP-FORWARD-MIB::ipCidrRouteStatus,INTEGER,read-create,,deprecated,active(1):notInService(2):notReady(3):createAndGo(4):createAndWait(5):destroy(6),The row status variable, used according to row installation and removal conventions.
.1.3.6.1.2.1.4.24.5,IP-FORWARD-MIB::ipForwardConformance,,,,,,
.1.3.6.1.2.1.4.24.5.1,IP-FORWARD-MIB::ipForwardGroups,,,,,,
.1.3.6.1.2.1.4.24.5.1.2,IP-FORWARD-MIB::ipForwardMultiPathGroup,,,,,,IP Multipath Route Table.
.1.3.6.1.2.1.4.24.5.1.3,IP-FORWARD-MIB::ipForwardCidrRouteGroup,,,,,,The CIDR Route Table. This group has been deprecated and replaced with inetForwardCidrRouteGroup.
.1.3.6.1.2.1.4.24.5.1.4,IP-FORWARD-MIB::inetForwardCidrRouteGroup,,,,,,The IP version-independent CIDR Route Table.
.1.3.6.1.2.1.4.24.5.2,IP-FORWARD-MIB::ipForwardCompliances,,,,,,
.1.3.6.1.2.1.4.24.5.2.1,IP-FORWARD-MIB::ipForwardCompliance,,,,,,The compliance statement for SNMPv2 entities that implement the ipForward MIB. This compliance statement has been deprecated and replaced with ipForwardFullCompliance and ipForwardReadOnlyCompliance.
.1.3.6.1.2.1.4.24.5.2.2,IP-FORWARD-MIB::ipForwardOldCompliance,,,,,,The compliance statement for SNMP entities that implement the ipForward MIB.
.1.3.6.1.2.1.4.24.5.2.3,IP-FORWARD-MIB::ipForwardFullCompliance,,,,,,When this MIB is implemented for read-create, the implementation can claim full compliance. There are a number of INDEX objects that cannot be represented in the form of OBJECT clauses in SMIv2, but for which there are compliance requirements, expressed in OBJECT clause form in this description: -- OBJECT inetCidrRouteDestType -- SYNTAX InetAddressType (ipv4(1), ipv6(2), -- ipv4z(3), ipv6z(4)) -- DESCRIPTION -- This MIB requires support for global and -- non-global ipv4 and ipv6 addresses. -- -- OBJECT inetCidrRouteDest -- SYNTAX InetAddress (SIZE (4 | 8 | 16 | 20)) -- DESCRIPTION -- This MIB requires support for global and -- non-global IPv4 and IPv6 addresses. -- -- OBJECT inetCidrRouteNextHopType -- SYNTAX InetAddressType (unknown(0), ipv4(1), -- ipv6(2), ipv4z(3) -- ipv6z(4)) -- DESCRIPTION -- This MIB requires support for global and -- non-global ipv4 and ipv6 addresses. -- -- OBJECT inetCidrRouteNextHop -- SYNTAX InetAddress (SIZE (0 | 4 | 8 | 16 | 20)) -- DESCRIPTION -- This MIB requires support for global and -- non-global IPv4 and IPv6 addresses. 
.1.3.6.1.2.1.4.24.5.2.4,IP-FORWARD-MIB::ipForwardReadOnlyCompliance,,,,,,When this MIB is implemented without support for read- create (i.e., in read-only mode), the implementation can claim read-only compliance.
.1.3.6.1.2.1.4.24.6,IP-FORWARD-MIB::inetCidrRouteNumber,Gauge32,read-only,,current,,The number of current inetCidrRouteTable entries that are not invalid.
.1.3.6.1.2.1.4.24.7,IP-FORWARD-MIB::inetCidrRouteTable,,not-accessible,,current,,This entity's IP Routing table.
.1.3.6.1.2.1.4.24.7.1,IP-FORWARD-MIB::inetCidrRouteEntry,,not-accessible,inetCidrRouteDestType:inetCidrRouteDest:inetCidrRoutePfxLen:inetCidrRoutePolicy:inetCidrRouteNextHopType:inetCidrRouteNextHop,current,,A particular route to a particular destination, under a particular policy (as reflected in the inetCidrRoutePolicy object). Dynamically created rows will survive an agent reboot. Implementers need to be aware that if the total number of elements (octets or sub-identifiers) in inetCidrRouteDest, inetCidrRoutePolicy, and inetCidrRouteNextHop exceeds 111, then OIDs of column instances in this table will have more than 128 sub- identifiers and cannot be accessed using SNMPv1, SNMPv2c, or SNMPv3.
.1.3.6.1.2.1.4.24.7.1.1,IP-FORWARD-MIB::inetCidrRouteDestType,INTEGER,not-accessible,,current,unknown(0):ipv4(1):ipv6(2):ipv4z(3):ipv6z(4):dns(16),The type of the inetCidrRouteDest address, as defined in the InetAddress MIB. Only those address types that may appear in an actual routing table are allowed as values of this object.
.1.3.6.1.2.1.4.24.7.1.2,IP-FORWARD-MIB::inetCidrRouteDest,OCTET,not-accessible,,current,,The destination IP address of this route. The type of this address is determined by the value of the inetCidrRouteDestType object. The values for the index objects inetCidrRouteDest and inetCidrRoutePfxLen must be consistent. When the value of inetCidrRouteDest (excluding the zone index, if one is present) is x, then the bitwise logical-AND of x with the value of the mask formed from the corresponding index object inetCidrRoutePfxLen MUST be equal to x. If not, then the index pair is not consistent and an inconsistentName error must be returned on SET or CREATE requests.
.1.3.6.1.2.1.4.24.7.1.3,IP-FORWARD-MIB::inetCidrRoutePfxLen,Unsigned32,not-accessible,,current,,Indicates the number of leading one bits that form the mask to be logical-ANDed with the destination address before being compared to the value in the inetCidrRouteDest field. The values for the index objects inetCidrRouteDest and inetCidrRoutePfxLen must be consistent. When the value of inetCidrRouteDest (excluding the zone index, if one is present) is x, then the bitwise logical-AND of x with the value of the mask formed from the corresponding index object inetCidrRoutePfxLen MUST be equal to x. If not, then the index pair is not consistent and an inconsistentName error must be returned on SET or CREATE requests.
.1.3.6.1.2.1.4.24.7.1.4,IP-FORWARD-MIB::inetCidrRoutePolicy,OBJECT,not-accessible,,current,,This object is an opaque object without any defined semantics. Its purpose is to serve as an additional index that may delineate between multiple entries to the same destination. The value { 0 0 } shall be used as the default value for this object.
.1.3.6.1.2.1.4.24.7.1.5,IP-FORWARD-MIB::inetCidrRouteNextHopType,INTEGER,not-accessible,,current,unknown(0):ipv4(1):ipv6(2):ipv4z(3):ipv6z(4):dns(16),The type of the inetCidrRouteNextHop address, as defined in the InetAddress MIB. Value should be set to unknown(0) for non-remote routes. Only those address types that may appear in an actual routing table are allowed as values of this object.
.1.3.6.1.2.1.4.24.7.1.6,IP-FORWARD-MIB::inetCidrRouteNextHop,OCTET,not-accessible,,current,,On remote routes, the address of the next system en route. For non-remote routes, a zero length string. The type of this address is determined by the value of the inetCidrRouteNextHopType object.
.1.3.6.1.2.1.4.24.7.1.7,IP-FORWARD-MIB::inetCidrRouteIfIndex,Integer32,read-create,,current,,The ifIndex value that identifies the local interface through which the next hop of this route should be reached. A value of 0 is valid and represents the scenario where no interface is specified.
.1.3.6.1.2.1.4.24.7.1.8,IP-FORWARD-MIB::inetCidrRouteType,INTEGER,read-create,,current,other(1):reject(2):local(3):remote(4):blackhole(5),The type of route. Note that local(3) refers to a route for which the next hop is the final destination; remote(4) refers to a route for which the next hop is not the final destination. Routes that do not result in traffic forwarding or rejection should not be displayed, even if the implementation keeps them stored internally. reject(2) refers to a route that, if matched, discards the message as unreachable and returns a notification (e.g., ICMP error) to the message sender. This is used in some protocols as a means of correctly aggregating routes. blackhole(5) refers to a route that, if matched, discards the message silently.
.1.3.6.1.2.1.4.24.7.1.9,IP-FORWARD-MIB::inetCidrRouteProto,INTEGER,read-only,,current,other(1):local(2):netmgmt(3):icmp(4):egp(5):ggp(6):hello(7):rip(8):isIs(9):esIs(10):ciscoIgrp(11):bbnSpfIgp(12):ospf(13):bgp(14):idpr(15):ciscoEigrp(16):dvmrp(17):rpl(18):dhcp(19):ttdp(20),The routing mechanism via which this route was learned. Inclusion of values for gateway routing protocols is not intended to imply that hosts should support those protocols.
.1.3.6.1.2.1.4.24.7.1.10,IP-FORWARD-MIB::inetCidrRouteAge,Gauge32,read-only,,current,,The number of seconds since this route was last updated or otherwise determined to be correct. Note that no semantics of 'too old' can be implied, except through knowledge of the routing protocol by which the route was learned.
.1.3.6.1.2.1.4.24.7.1.11,IP-FORWARD-MIB::inetCidrRouteNextHopAS,Unsigned32,read-create,,current,,The Autonomous System Number of the Next Hop. The semantics of this object are determined by the routing- protocol specified in the route's inetCidrRouteProto value. When this object is unknown or not relevant, its value should be set to zero.
.1.3.6.1.2.1.4.24.7.1.12,IP-FORWARD-MIB::inetCidrRouteMetric1,Integer32,read-create,,current,,The primary routing metric for this route. The semantics of this metric are determined by the routing- protocol specified in the route's inetCidrRouteProto value. If this metric is not used, its value should be set to -1.
.1.3.6.1.2.1.4.24.7.1.13,IP-FORWARD-MIB::inetCidrRouteMetric2,Integer32,read-create,,current,,An alternate routing metric for this route. The semantics of this metric are determined by the routing- protocol specified in the route's inetCidrRouteProto value. If this metric is not used, its value should be set to -1.
.1.3.6.1.2.1.4.24.7.1.14,IP-FORWARD-MIB::inetCidrRouteMetric3,Integer32,read-create,,current,,An alternate routing metric for this route. The semantics of this metric are determined by the routing- protocol specified in the route's inetCidrRouteProto value. If this metric is not used, its value should be set to -1.
.1.3.6.1.2.1.4.24.7.1.15,IP-FORWARD-MIB::inetCidrRouteMetric4,Integer32,read-create,,current,,An alternate routing metric for this route. The semantics of this metric are determined by the routing- protocol specified in the route's inetCidrRouteProto value. If this metric is not used, its value should be set to -1.
.1.3.6.1.2.1.4.24.7.1.16,IP-FORWARD-MIB::inetCidrRouteMetric5,Integer32,read-create,,current,,An alternate routing metric for this route. The semantics of this metric are determined by the routing- protocol specified in the route's inetCidrRouteProto value. If this metric is not used, its value should be set to -1.
.1.3.6.1.2.1.4.24.7.1.17,IP-FORWARD-MIB::inetCidrRouteStatus,INTEGER,read-create,,current,active(1):notInService(2):notReady(3):createAndGo(4):createAndWait(5):destroy(6),The row status variable, used according to row installation and removal conventions. A row entry cannot be modified when the status is marked as active(1).
.1.3.6.1.2.1.4.24.8,IP-FORWARD-MIB::inetCidrRouteDiscards,Counter32,read-only,,current,,The number of valid route entries discarded from the inetCidrRouteTable. Discarded route entries do not appear in the inetCidrRouteTable. One possible reason for discarding an entry would be to free-up buffer space for other route table entries.
.1.3.6.1.2.1.4.25,IP-MIB::ipv6IpForwarding,INTEGER,read-write,,current,forwarding(1):notForwarding(2),The indication of whether this entity is acting as an IPv6 router on any interface in respect to the forwarding of datagrams received by, but not addressed to, this entity. IPv6 routers forward datagrams. IPv6 hosts do not (except those source-routed via the host). When this object is written, the entity SHOULD save the change to non-volatile storage and restore the object from non-volatile storage upon re-initialization of the system.
.1.3.6.1.2.1.4.26,IP-MIB::ipv6IpDefaultHopLimit,Integer32,read-write,,current,,The default value inserted into the Hop Limit field of the IPv6 header of datagrams originated at this entity whenever a Hop Limit value is not supplied by the transport layer protocol. When this object is written, the entity SHOULD save the change to non-volatile storage and restore the object from non-volatile storage upon re-initialization of the system.
.1.3.6.1.2.1.4.27,IP-MIB::ipv4InterfaceTableLastChange,TimeTicks,read-only,,current,,The value of sysUpTime on the most recent occasion at which a row in the ipv4InterfaceTable was added or deleted, or when an ipv4InterfaceReasmMaxSize or an ipv4InterfaceEnableStatus object was modified. If new objects are added to the ipv4InterfaceTable that require the ipv4InterfaceTableLastChange to be updated when they are modified, they must specify that requirement in their description clause.
.1.3.6.1.2.1.4.28,IP-MIB::ipv4InterfaceTable,,not-accessible,,current,,The table containing per-interface IPv4-specific information.
.1.3.6.1.2.1.4.28.1,IP-MIB::ipv4InterfaceEntry,,not-accessible,ipv4InterfaceIfIndex,current,,An entry containing IPv4-specific information for a specific interface.
.1.3.6.1.2.1.4.28.1.1,IP-MIB::ipv4InterfaceIfIndex,Integer32,not-accessible,,current,,The index value that uniquely identifies the interface to which this entry is applicable. The interface identified by a particular value of this index is the same interface as identified by the same value of the IF-MIB's ifIndex.
.1.3.6.1.2.1.4.28.1.2,IP-MIB::ipv4InterfaceReasmMaxSize,Integer32,read-only,,current,,The size of the largest IPv4 datagram that this entity can re-assemble from incoming IPv4 fragmented datagrams received on this interface.
.1.3.6.1.2.1.4.28.1.3,IP-MIB::ipv4InterfaceEnableStatus,INTEGER,read-write,,current,up(1):down(2),The indication of whether IPv4 is enabled (up) or disabled (down) on this interface. This object does not affect the state of the interface itself, only its connection to an IPv4 stack. The IF-MIB should be used to control the state of the interface.
.1.3.6.1.2.1.4.28.1.4,IP-MIB::ipv4InterfaceRetransmitTime,Unsigned32,read-only,,current,,The time between retransmissions of ARP requests to a neighbor when resolving the address or when probing the reachability of a neighbor.
.1.3.6.1.2.1.4.29,IP-MIB::ipv6InterfaceTableLastChange,TimeTicks,read-only,,current,,The value of sysUpTime on the most recent occasion at which a row in the ipv6InterfaceTable was added or deleted or when an ipv6InterfaceReasmMaxSize, ipv6InterfaceIdentifier, ipv6InterfaceEnableStatus, ipv6InterfaceReachableTime, ipv6InterfaceRetransmitTime, or ipv6InterfaceForwarding object was modified. If new objects are added to the ipv6InterfaceTable that require the ipv6InterfaceTableLastChange to be updated when they are modified, they must specify that requirement in their description clause.
.1.3.6.1.2.1.4.30,IP-MIB::ipv6InterfaceTable,,not-accessible,,current,,The table containing per-interface IPv6-specific information.
.1.3.6.1.2.1.4.30.1,IP-MIB::ipv6InterfaceEntry,,not-accessible,ipv6InterfaceIfIndex,current,,An entry containing IPv6-specific information for a given interface.
.1.3.6.1.2.1.4.30.1.1,IP-MIB::ipv6InterfaceIfIndex,Integer32,not-accessible,,current,,The index value that uniquely identifies the interface to which this entry is applicable. The interface identified by a particular value of this index is the same interface as identified by the same value of the IF-MIB's ifIndex.
.1.3.6.1.2.1.4.30.1.2,IP-MIB::ipv6InterfaceReasmMaxSize,Unsigned32,read-only,,current,,The size of the largest IPv6 datagram that this entity can re-assemble from incoming IPv6 fragmented datagrams received on this interface.
.1.3.6.1.2.1.4.30.1.3,IP-MIB::ipv6InterfaceIdentifier,OCTET,read-only,,current,,The Interface Identifier for this interface. The Interface Identifier is combined with an address prefix to form an interface address. By default, the Interface Identifier is auto-configured according to the rules of the link type to which this interface is attached. A zero length identifier may be used where appropriate. One possible example is a loopback interface.
.1.3.6.1.2.1.4.30.1.5,IP-MIB::ipv6InterfaceEnableStatus,INTEGER,read-write,,current,up(1):down(2),The indication of whether IPv6 is enabled (up) or disabled (down) on this interface. This object does not affect the state of the interface itself, only its connection to an IPv6 stack. The IF-MIB should be used to control the state of the interface. When this object is written, the entity SHOULD save the change to non-volatile storage and restore the object from non-volatile storage upon re-initialization of the system.
.1.3.6.1.2.1.4.30.1.6,IP-MIB::ipv6InterfaceReachableTime,Unsigned32,read-only,,current,,The time a neighbor is considered reachable after receiving a reachability confirmation.
.1.3.6.1.2.1.4.30.1.7,IP-MIB::ipv6InterfaceRetransmitTime,Unsigned32,read-only,,current,,The time between retransmissions of Neighbor Solicitation messages to a neighbor when resolving the address or when probing the reachability of a neighbor.
.1.3.6.1.2.1.4.30.1.8,IP-MIB::ipv6InterfaceForwarding,INTEGER,read-write,,current,forwarding(1):notForwarding(2),The indication of whether this entity is acting as an IPv6 router on this interface with respect to the forwarding of datagrams received by, but not addressed to, this entity. IPv6 routers forward datagrams. IPv6 hosts do not (except those source-routed via the host). This object is constrained by ipv6IpForwarding and is ignored if ipv6IpForwarding is set to notForwarding. Those systems that do not provide per-interface control of the forwarding function should set this object to forwarding for all interfaces and allow the ipv6IpForwarding object to control the forwarding capability. When this object is written, the entity SHOULD save the change to non-volatile storage and restore the object from non-volatile storage upon re-initialization of the system.
.1.3.6.1.2.1.4.31,IP-MIB::ipTrafficStats,,,,,,
.1.3.6.1.2.1.4.31.1,IP-MIB::ipSystemStatsTable,,not-accessible,,current,,The table containing system wide, IP version specific traffic statistics. This table and the ipIfStatsTable contain similar objects whose difference is in their granularity. Where this table contains system wide traffic statistics, the ipIfStatsTable contains the same statistics but counted on a per-interface basis.
.1.3.6.1.2.1.4.31.1.1,IP-MIB::ipSystemStatsEntry,,not-accessible,ipSystemStatsIPVersion,current,,A statistics entry containing system-wide objects for a particular IP version.
.1.3.6.1.2.1.4.31.1.1.1,IP-MIB::ipSystemStatsIPVersion,INTEGER,not-accessible,,current,unknown(0):ipv4(1):ipv6(2),The IP version of this row.
.1.3.6.1.2.1.4.31.1.1.3,IP-MIB::ipSystemStatsInReceives,Counter32,read-only,,current,,The total number of input IP datagrams received, including those received in error. Discontinuities in the value of this counter can occur at re-initialization of the management system, and at other times as indicated by the value of ipSystemStatsDiscontinuityTime.
.1.3.6.1.2.1.4.31.1.1.4,IP-MIB::ipSystemStatsHCInReceives,Counter64,read-only,,current,,The total number of input IP datagrams received, including those received in error. This object counts the same datagrams as ipSystemStatsInReceives, but allows for larger values. Discontinuities in the value of this counter can occur at re-initialization of the management system, and at other times as indicated by the value of ipSystemStatsDiscontinuityTime.
.1.3.6.1.2.1.4.31.1.1.5,IP-MIB::ipSystemStatsInOctets,Counter32,read-only,,current,,The total number of octets received in input IP datagrams, including those received in error. Octets from datagrams counted in ipSystemStatsInReceives MUST be counted here. Discontinuities in the value of this counter can occur at re-initialization of the management system, and at other times as indicated by the value of ipSystemStatsDiscontinuityTime.
.1.3.6.1.2.1.4.31.1.1.6,IP-MIB::ipSystemStatsHCInOctets,Counter64,read-only,,current,,The total number of octets received in input IP datagrams, including those received in error. This object counts the same octets as ipSystemStatsInOctets, but allows for larger values. Discontinuities in the value of this counter can occur at re-initialization of the management system, and at other times as indicated by the value of ipSystemStatsDiscontinuityTime.
.1.3.6.1.2.1.4.31.1.1.7,IP-MIB::ipSystemStatsInHdrErrors,Counter32,read-only,,current,,The number of input IP datagrams discarded due to errors in their IP headers, including version number mismatch, other format errors, hop count exceeded, errors discovered in processing their IP options, etc. Discontinuities in the value of this counter can occur at re-initialization of the management system, and at other times as indicated by the value of ipSystemStatsDiscontinuityTime.
.1.3.6.1.2.1.4.31.1.1.8,IP-MIB::ipSystemStatsInNoRoutes,Counter32,read-only,,current,,The number of input IP datagrams discarded because no route could be found to transmit them to their destination. Discontinuities in the value of this counter can occur at re-initialization of the management system, and at other times as indicated by the value of ipSystemStatsDiscontinuityTime.
.1.3.6.1.2.1.4.31.1.1.9,IP-MIB::ipSystemStatsInAddrErrors,Counter32,read-only,,current,,The number of input IP datagrams discarded because the IP address in their IP header's destination field was not a valid address to be received at this entity. This count includes invalid addresses (e.g., ::0). For entities that are not IP routers and therefore do not forward datagrams, this counter includes datagrams discarded because the destination address was not a local address. Discontinuities in the value of this counter can occur at re-initialization of the management system, and at other times as indicated by the value of ipSystemStatsDiscontinuityTime.
.1.3.6.1.2.1.4.31.1.1.10,IP-MIB::ipSystemStatsInUnknownProtos,Counter32,read-only,,current,,The number of locally-addressed IP datagrams received successfully but discarded because of an unknown or unsupported protocol. When tracking interface statistics, the counter of the interface to which these datagrams were addressed is incremented. This interface might not be the same as the input interface for some of the datagrams. Discontinuities in the value of this counter can occur at re-initialization of the management system, and at other times as indicated by the value of ipSystemStatsDiscontinuityTime.
.1.3.6.1.2.1.4.31.1.1.11,IP-MIB::ipSystemStatsInTruncatedPkts,Counter32,read-only,,current,,The number of input IP datagrams discarded because the datagram frame didn't carry enough data. Discontinuities in the value of this counter can occur at re-initialization of the management system, and at other times as indicated by the value of ipSystemStatsDiscontinuityTime.
.1.3.6.1.2.1.4.31.1.1.12,IP-MIB::ipSystemStatsInForwDatagrams,Counter32,read-only,,current,,The number of input datagrams for which this entity was not their final IP destination and for which this entity attempted to find a route to forward them to that final destination. In entities that do not act as IP routers, this counter will include only those datagrams that were Source-Routed via this entity, and the Source-Route processing was successful. When tracking interface statistics, the counter of the incoming interface is incremented for each datagram. Discontinuities in the value of this counter can occur at re-initialization of the management system, and at other times as indicated by the value of ipSystemStatsDiscontinuityTime.
.1.3.6.1.2.1.4.31.1.1.13,IP-MIB::ipSystemStatsHCInForwDatagrams,Counter64,read-only,,current,,The number of input datagrams for which this entity was not their final IP destination and for which this entity attempted to find a route to forward them to that final destination. This object counts the same packets as ipSystemStatsInForwDatagrams, but allows for larger values. Discontinuities in the value of this counter can occur at re-initialization of the management system, and at other times as indicated by the value of ipSystemStatsDiscontinuityTime.
.1.3.6.1.2.1.4.31.1.1.14,IP-MIB::ipSystemStatsReasmReqds,Counter32,read-only,,current,,The number of IP fragments received that needed to be reassembled at this interface. When tracking interface statistics, the counter of the interface to which these fragments were addressed is incremented. This interface might not be the same as the input interface for some of the fragments. Discontinuities in the value of this counter can occur at re-initialization of the management system, and at other times as indicated by the value of ipSystemStatsDiscontinuityTime.
.1.3.6.1.2.1.4.31.1.1.15,IP-MIB::ipSystemStatsReasmOKs,Counter32,read-only,,current,,The number of IP datagrams successfully reassembled. When tracking interface statistics, the counter of the interface to which these datagrams were addressed is incremented. This interface might not be the same as the input interface for some of the datagrams. Discontinuities in the value of this counter can occur at re-initialization of the management system, and at other times as indicated by the value of ipSystemStatsDiscontinuityTime.
.1.3.6.1.2.1.4.31.1.1.16,IP-MIB::ipSystemStatsReasmFails,Counter32,read-only,,current,,The number of failures detected by the IP re-assembly algorithm (for whatever reason: timed out, errors, etc.). Note that this is not necessarily a count of discarded IP fragments since some algorithms (notably the algorithm in RFC 815) can lose track of the number of fragments by combining them as they are received. When tracking interface statistics, the counter of the interface to which these fragments were addressed is incremented. This interface might not be the same as the input interface for some of the fragments. Discontinuities in the value of this counter can occur at re-initialization of the management system, and at other times as indicated by the value of ipSystemStatsDiscontinuityTime.
.1.3.6.1.2.1.4.31.1.1.17,IP-MIB::ipSystemStatsInDiscards,Counter32,read-only,,current,,The number of input IP datagrams for which no problems were encountered to prevent their continued processing, but were discarded (e.g., for lack of buffer space). Note that this counter does not include any datagrams discarded while awaiting re-assembly. Discontinuities in the value of this counter can occur at re-initialization of the management system, and at other times as indicated by the value of ipSystemStatsDiscontinuityTime.
.1.3.6.1.2.1.4.31.1.1.18,IP-MIB::ipSystemStatsInDelivers,Counter32,read-only,,current,,The total number of datagrams successfully delivered to IP user-protocols (including ICMP). When tracking interface statistics, the counter of the interface to which these datagrams were addressed is incremented. This interface might not be the same as the input interface for some of the datagrams. Discontinuities in the value of this counter can occur at re-initialization of the management system, and at other times as indicated by the value of ipSystemStatsDiscontinuityTime.
.1.3.6.1.2.1.4.31.1.1.19,IP-MIB::ipSystemStatsHCInDelivers,Counter64,read-only,,current,,The total number of datagrams successfully delivered to IP user-protocols (including ICMP). This object counts the same packets as ipSystemStatsInDelivers, but allows for larger values. Discontinuities in the value of this counter can occur at re-initialization of the management system, and at other times as indicated by the value of ipSystemStatsDiscontinuityTime.
.1.3.6.1.2.1.4.31.1.1.20,IP-MIB::ipSystemStatsOutRequests,Counter32,read-only,,current,,The total number of IP datagrams that local IP user- protocols (including ICMP) supplied to IP in requests for transmission. Note that this counter does not include any datagrams counted in ipSystemStatsOutForwDatagrams. Discontinuities in the value of this counter can occur at re-initialization of the management system, and at other times as indicated by the value of ipSystemStatsDiscontinuityTime.
.1.3.6.1.2.1.4.31.1.1.21,IP-MIB::ipSystemStatsHCOutRequests,Counter64,read-only,,current,,The total number of IP datagrams that local IP user- protocols (including ICMP) supplied to IP in requests for transmission. This object counts the same packets as ipSystemStatsOutRequests, but allows for larger values. Discontinuities in the value of this counter can occur at re-initialization of the management system, and at other times as indicated by the value of ipSystemStatsDiscontinuityTime.
.1.3.6.1.2.1.4.31.1.1.22,IP-MIB::ipSystemStatsOutNoRoutes,Counter32,read-only,,current,,The number of locally generated IP datagrams discarded because no route could be found to transmit them to their destination. Discontinuities in the value of this counter can occur at re-initialization of the management system, and at other times as indicated by the value of ipSystemStatsDiscontinuityTime.
.1.3.6.1.2.1.4.31.1.1.23,IP-MIB::ipSystemStatsOutForwDatagrams,Counter32,read-only,,current,,The number of datagrams for which this entity was not their final IP destination and for which it was successful in finding a path to their final destination. In entities that do not act as IP routers, this counter will include only those datagrams that were Source-Routed via this entity, and the Source-Route processing was successful. When tracking interface statistics, the counter of the outgoing interface is incremented for a successfully forwarded datagram. Discontinuities in the value of this counter can occur at re-initialization of the management system, and at other times as indicated by the value of ipSystemStatsDiscontinuityTime.
.1.3.6.1.2.1.4.31.1.1.24,IP-MIB::ipSystemStatsHCOutForwDatagrams,Counter64,read-only,,current,,The number of datagrams for which this entity was not their final IP destination and for which it was successful in finding a path to their final destination. This object counts the same packets as ipSystemStatsOutForwDatagrams, but allows for larger values. Discontinuities in the value of this counter can occur at re-initialization of the management system, and at other times as indicated by the value of ipSystemStatsDiscontinuityTime.
.1.3.6.1.2.1.4.31.1.1.25,IP-MIB::ipSystemStatsOutDiscards,Counter32,read-only,,current,,The number of output IP datagrams for which no problem was encountered to prevent their transmission to their destination, but were discarded (e.g., for lack of buffer space). Note that this counter would include datagrams counted in ipSystemStatsOutForwDatagrams if any such datagrams met this (discretionary) discard criterion. Discontinuities in the value of this counter can occur at re-initialization of the management system, and at other times as indicated by the value of ipSystemStatsDiscontinuityTime.
.1.3.6.1.2.1.4.31.1.1.26,IP-MIB::ipSystemStatsOutFragReqds,Counter32,read-only,,current,,The number of IP datagrams that would require fragmentation in order to be transmitted. When tracking interface statistics, the counter of the outgoing interface is incremented for a successfully fragmented datagram. Discontinuities in the value of this counter can occur at re-initialization of the management system, and at other times as indicated by the value of ipSystemStatsDiscontinuityTime.
.1.3.6.1.2.1.4.31.1.1.27,IP-MIB::ipSystemStatsOutFragOKs,Counter32,read-only,,current,,The number of IP datagrams that have been successfully fragmented. When tracking interface statistics, the counter of the outgoing interface is incremented for a successfully fragmented datagram. Discontinuities in the value of this counter can occur at re-initialization of the management system, and at other times as indicated by the value of ipSystemStatsDiscontinuityTime.
.1.3.6.1.2.1.4.31.1.1.28,IP-MIB::ipSystemStatsOutFragFails,Counter32,read-only,,current,,The number of IP datagrams that have been discarded because they needed to be fragmented but could not be. This includes IPv4 packets that have the DF bit set and IPv6 packets that are being forwarded and exceed the outgoing link MTU. When tracking interface statistics, the counter of the outgoing interface is incremented for an unsuccessfully fragmented datagram. Discontinuities in the value of this counter can occur at re-initialization of the management system, and at other times as indicated by the value of ipSystemStatsDiscontinuityTime.
.1.3.6.1.2.1.4.31.1.1.29,IP-MIB::ipSystemStatsOutFragCreates,Counter32,read-only,,current,,The number of output datagram fragments that have been generated as a result of IP fragmentation. When tracking interface statistics, the counter of the outgoing interface is incremented for a successfully fragmented datagram. Discontinuities in the value of this counter can occur at re-initialization of the management system, and at other times as indicated by the value of ipSystemStatsDiscontinuityTime.
.1.3.6.1.2.1.4.31.1.1.30,IP-MIB::ipSystemStatsOutTransmits,Counter32,read-only,,current,,The total number of IP datagrams that this entity supplied to the lower layers for transmission. This includes datagrams generated locally and those forwarded by this entity. Discontinuities in the value of this counter can occur at re-initialization of the management system, and at other times as indicated by the value of ipSystemStatsDiscontinuityTime.
.1.3.6.1.2.1.4.31.1.1.31,IP-MIB::ipSystemStatsHCOutTransmits,Counter64,read-only,,current,,The total number of IP datagrams that this entity supplied to the lower layers for transmission. This object counts the same datagrams as ipSystemStatsOutTransmits, but allows for larger values. Discontinuities in the value of this counter can occur at re-initialization of the management system, and at other times as indicated by the value of ipSystemStatsDiscontinuityTime.
.1.3.6.1.2.1.4.31.1.1.32,IP-MIB::ipSystemStatsOutOctets,Counter32,read-only,,current,,The total number of octets in IP datagrams delivered to the lower layers for transmission. Octets from datagrams counted in ipSystemStatsOutTransmits MUST be counted here. Discontinuities in the value of this counter can occur at re-initialization of the management system, and at other times as indicated by the value of ipSystemStatsDiscontinuityTime.
.1.3.6.1.2.1.4.31.1.1.33,IP-MIB::ipSystemStatsHCOutOctets,Counter64,read-only,,current,,The total number of octets in IP datagrams delivered to the lower layers for transmission. This objects counts the same octets as ipSystemStatsOutOctets, but allows for larger values. Discontinuities in the value of this counter can occur at re-initialization of the management system, and at other times as indicated by the value of ipSystemStatsDiscontinuityTime.
.1.3.6.1.2.1.4.31.1.1.34,IP-MIB::ipSystemStatsInMcastPkts,Counter32,read-only,,current,,The number of IP multicast datagrams received. Discontinuities in the value of this counter can occur at re-initialization of the management system, and at other times as indicated by the value of ipSystemStatsDiscontinuityTime.
.1.3.6.1.2.1.4.31.1.1.35,IP-MIB::ipSystemStatsHCInMcastPkts,Counter64,read-only,,current,,The number of IP multicast datagrams received. This object counts the same datagrams as ipSystemStatsInMcastPkts but allows for larger values. Discontinuities in the value of this counter can occur at re-initialization of the management system, and at other times as indicated by the value of ipSystemStatsDiscontinuityTime.
.1.3.6.1.2.1.4.31.1.1.36,IP-MIB::ipSystemStatsInMcastOctets,Counter32,read-only,,current,,The total number of octets received in IP multicast datagrams. Octets from datagrams counted in ipSystemStatsInMcastPkts MUST be counted here. Discontinuities in the value of this counter can occur at re-initialization of the management system, and at other times as indicated by the value of ipSystemStatsDiscontinuityTime.
.1.3.6.1.2.1.4.31.1.1.37,IP-MIB::ipSystemStatsHCInMcastOctets,Counter64,read-only,,current,,The total number of octets received in IP multicast datagrams. This object counts the same octets as ipSystemStatsInMcastOctets, but allows for larger values. Discontinuities in the value of this counter can occur at re-initialization of the management system, and at other times as indicated by the value of ipSystemStatsDiscontinuityTime.
.1.3.6.1.2.1.4.31.1.1.38,IP-MIB::ipSystemStatsOutMcastPkts,Counter32,read-only,,current,,The number of IP multicast datagrams transmitted. Discontinuities in the value of this counter can occur at re-initialization of the management system, and at other times as indicated by the value of ipSystemStatsDiscontinuityTime.
.1.3.6.1.2.1.4.31.1.1.39,IP-MIB::ipSystemStatsHCOutMcastPkts,Counter64,read-only,,current,,The number of IP multicast datagrams transmitted. This object counts the same datagrams as ipSystemStatsOutMcastPkts, but allows for larger values. Discontinuities in the value of this counter can occur at re-initialization of the management system, and at other times as indicated by the value of ipSystemStatsDiscontinuityTime.
.1.3.6.1.2.1.4.31.1.1.40,IP-MIB::ipSystemStatsOutMcastOctets,Counter32,read-only,,current,,The total number of octets transmitted in IP multicast datagrams. Octets from datagrams counted in ipSystemStatsOutMcastPkts MUST be counted here. Discontinuities in the value of this counter can occur at re-initialization of the management system, and at other times as indicated by the value of ipSystemStatsDiscontinuityTime.
.1.3.6.1.2.1.4.31.1.1.41,IP-MIB::ipSystemStatsHCOutMcastOctets,Counter64,read-only,,current,,The total number of octets transmitted in IP multicast datagrams. This object counts the same octets as ipSystemStatsOutMcastOctets, but allows for larger values. Discontinuities in the value of this counter can occur at re-initialization of the management system, and at other times as indicated by the value of ipSystemStatsDiscontinuityTime.
.1.3.6.1.2.1.4.31.1.1.42,IP-MIB::ipSystemStatsInBcastPkts,Counter32,read-only,,current,,The number of IP broadcast datagrams received. Discontinuities in the value of this counter can occur at re-initialization of the management system, and at other times as indicated by the value of ipSystemStatsDiscontinuityTime.
.1.3.6.1.2.1.4.31.1.1.43,IP-MIB::ipSystemStatsHCInBcastPkts,Counter64,read-only,,current,,The number of IP broadcast datagrams received. This object counts the same datagrams as ipSystemStatsInBcastPkts but allows for larger values. Discontinuities in the value of this counter can occur at re-initialization of the management system, and at other times as indicated by the value of ipSystemStatsDiscontinuityTime.
.1.3.6.1.2.1.4.31.1.1.44,IP-MIB::ipSystemStatsOutBcastPkts,Counter32,read-only,,current,,The number of IP broadcast datagrams transmitted. Discontinuities in the value of this counter can occur at re-initialization of the management system, and at other times as indicated by the value of ipSystemStatsDiscontinuityTime.
.1.3.6.1.2.1.4.31.1.1.45,IP-MIB::ipSystemStatsHCOutBcastPkts,Counter64,read-only,,current,,The number of IP broadcast datagrams transmitted. This object counts the same datagrams as ipSystemStatsOutBcastPkts, but allows for larger values. Discontinuities in the value of this counter can occur at re-initialization of the management system, and at other times as indicated by the value of ipSystemStatsDiscontinuityTime.
.1.3.6.1.2.1.4.31.1.1.46,IP-MIB::ipSystemStatsDiscontinuityTime,TimeTicks,read-only,,current,,The value of sysUpTime on the most recent occasion at which any one or more of this entry's counters suffered a discontinuity. If no such discontinuities have occurred since the last re- initialization of the local management subsystem, then this object contains a zero value.
.1.3.6.1.2.1.4.31.1.1.47,IP-MIB::ipSystemStatsRefreshRate,Unsigned32,read-only,,current,,The minimum reasonable polling interval for this entry. This object provides an indication of the minimum amount of time required to update the counters in this entry.
.1.3.6.1.2.1.4.31.2,IP-MIB::ipIfStatsTableLastChange,TimeTicks,read-only,,current,,The value of sysUpTime on the most recent occasion at which a row in the ipIfStatsTable was added or deleted. If new objects are added to the ipIfStatsTable that require the ipIfStatsTableLastChange to be updated when they are modified, they must specify that requirement in their description clause.
.1.3.6.1.2.1.4.31.3,IP-MIB::ipIfStatsTable,,not-accessible,,current,,The table containing per-interface traffic statistics. This table and the ipSystemStatsTable contain similar objects whose difference is in their granularity. Where this table contains per-interface statistics, the ipSystemStatsTable contains the same statistics, but counted on a system wide basis.
.1.3.6.1.2.1.4.31.3.1,IP-MIB::ipIfStatsEntry,,not-accessible,ipIfStatsIPVersion:ipIfStatsIfIndex,current,,An interface statistics entry containing objects for a particular interface and version of IP.
.1.3.6.1.2.1.4.31.3.1.1,IP-MIB::ipIfStatsIPVersion,INTEGER,not-accessible,,current,unknown(0):ipv4(1):ipv6(2),The IP version of this row.
.1.3.6.1.2.1.4.31.3.1.2,IP-MIB::ipIfStatsIfIndex,Integer32,not-accessible,,current,,The index value that uniquely identifies the interface to which this entry is applicable. The interface identified by a particular value of this index is the same interface as identified by the same value of the IF-MIB's ifIndex.
.1.3.6.1.2.1.4.31.3.1.3,IP-MIB::ipIfStatsInReceives,Counter32,read-only,,current,,The total number of input IP datagrams received, including those received in error. Discontinuities in the value of this counter can occur at re-initialization of the management system, and at other times as indicated by the value of ipIfStatsDiscontinuityTime.
.1.3.6.1.2.1.4.31.3.1.4,IP-MIB::ipIfStatsHCInReceives,Counter64,read-only,,current,,The total number of input IP datagrams received, including those received in error. This object counts the same datagrams as ipIfStatsInReceives, but allows for larger values. Discontinuities in the value of this counter can occur at re-initialization of the management system, and at other times as indicated by the value of ipIfStatsDiscontinuityTime.
.1.3.6.1.2.1.4.31.3.1.5,IP-MIB::ipIfStatsInOctets,Counter32,read-only,,current,,The total number of octets received in input IP datagrams, including those received in error. Octets from datagrams counted in ipIfStatsInReceives MUST be counted here. Discontinuities in the value of this counter can occur at re-initialization of the management system, and at other times as indicated by the value of ipIfStatsDiscontinuityTime.
.1.3.6.1.2.1.4.31.3.1.6,IP-MIB::ipIfStatsHCInOctets,Counter64,read-only,,current,,The total number of octets received in input IP datagrams, including those received in error. This object counts the same octets as ipIfStatsInOctets, but allows for larger values. Discontinuities in the value of this counter can occur at re-initialization of the management system, and at other times as indicated by the value of ipIfStatsDiscontinuityTime.
.1.3.6.1.2.1.4.31.3.1.7,IP-MIB::ipIfStatsInHdrErrors,Counter32,read-only,,current,,The number of input IP datagrams discarded due to errors in their IP headers, including version number mismatch, other format errors, hop count exceeded, errors discovered in processing their IP options, etc. Discontinuities in the value of this counter can occur at re-initialization of the management system, and at other times as indicated by the value of ipIfStatsDiscontinuityTime.
.1.3.6.1.2.1.4.31.3.1.8,IP-MIB::ipIfStatsInNoRoutes,Counter32,read-only,,current,,The number of input IP datagrams discarded because no route could be found to transmit them to their destination. Discontinuities in the value of this counter can occur at re-initialization of the management system, and at other times as indicated by the value of ipIfStatsDiscontinuityTime.
.1.3.6.1.2.1.4.31.3.1.9,IP-MIB::ipIfStatsInAddrErrors,Counter32,read-only,,current,,The number of input IP datagrams discarded because the IP address in their IP header's destination field was not a valid address to be received at this entity. This count includes invalid addresses (e.g., ::0). For entities that are not IP routers and therefore do not forward datagrams, this counter includes datagrams discarded because the destination address was not a local address. Discontinuities in the value of this counter can occur at re-initialization of the management system, and at other times as indicated by the value of ipIfStatsDiscontinuityTime.
.1.3.6.1.2.1.4.31.3.1.10,IP-MIB::ipIfStatsInUnknownProtos,Counter32,read-only,,current,,The number of locally-addressed IP datagrams received successfully but discarded because of an unknown or unsupported protocol. When tracking interface statistics, the counter of the interface to which these datagrams were addressed is incremented. This interface might not be the same as the input interface for some of the datagrams. Discontinuities in the value of this counter can occur at re-initialization of the management system, and at other times as indicated by the value of ipIfStatsDiscontinuityTime.
.1.3.6.1.2.1.4.31.3.1.11,IP-MIB::ipIfStatsInTruncatedPkts,Counter32,read-only,,current,,The number of input IP datagrams discarded because the datagram frame didn't carry enough data. Discontinuities in the value of this counter can occur at re-initialization of the management system, and at other times as indicated by the value of ipIfStatsDiscontinuityTime.
.1.3.6.1.2.1.4.31.3.1.12,IP-MIB::ipIfStatsInForwDatagrams,Counter32,read-only,,current,,The number of input datagrams for which this entity was not their final IP destination and for which this entity attempted to find a route to forward them to that final destination. In entities that do not act as IP routers, this counter will include only those datagrams that were Source-Routed via this entity, and the Source-Route processing was successful. When tracking interface statistics, the counter of the incoming interface is incremented for each datagram. Discontinuities in the value of this counter can occur at re-initialization of the management system, and at other times as indicated by the value of ipIfStatsDiscontinuityTime.
.1.3.6.1.2.1.4.31.3.1.13,IP-MIB::ipIfStatsHCInForwDatagrams,Counter64,read-only,,current,,The number of input datagrams for which this entity was not their final IP destination and for which this entity attempted to find a route to forward them to that final destination. This object counts the same packets as ipIfStatsInForwDatagrams, but allows for larger values. Discontinuities in the value of this counter can occur at re-initialization of the management system, and at other times as indicated by the value of ipIfStatsDiscontinuityTime.
.1.3.6.1.2.1.4.31.3.1.14,IP-MIB::ipIfStatsReasmReqds,Counter32,read-only,,current,,The number of IP fragments received that needed to be reassembled at this interface. When tracking interface statistics, the counter of the interface to which these fragments were addressed is incremented. This interface might not be the same as the input interface for some of the fragments. Discontinuities in the value of this counter can occur at re-initialization of the management system, and at other times as indicated by the value of ipIfStatsDiscontinuityTime.
.1.3.6.1.2.1.4.31.3.1.15,IP-MIB::ipIfStatsReasmOKs,Counter32,read-only,,current,,The number of IP datagrams successfully reassembled. When tracking interface statistics, the counter of the interface to which these datagrams were addressed is incremented. This interface might not be the same as the input interface for some of the datagrams. Discontinuities in the value of this counter can occur at re-initialization of the management system, and at other times as indicated by the value of ipIfStatsDiscontinuityTime.
.1.3.6.1.2.1.4.31.3.1.16,IP-MIB::ipIfStatsReasmFails,Counter32,read-only,,current,,The number of failures detected by the IP re-assembly algorithm (for whatever reason: timed out, errors, etc.). Note that this is not necessarily a count of discarded IP fragments since some algorithms (notably the algorithm in RFC 815) can lose track of the number of fragments by combining them as they are received. When tracking interface statistics, the counter of the interface to which these fragments were addressed is incremented. This interface might not be the same as the input interface for some of the fragments. Discontinuities in the value of this counter can occur at re-initialization of the management system, and at other times as indicated by the value of ipIfStatsDiscontinuityTime.
.1.3.6.1.2.1.4.31.3.1.17,IP-MIB::ipIfStatsInDiscards,Counter32,read-only,,current,,The number of input IP datagrams for which no problems were encountered to prevent their continued processing, but were discarded (e.g., for lack of buffer space). Note that this counter does not include any datagrams discarded while awaiting re-assembly. Discontinuities in the value of this counter can occur at re-initialization of the management system, and at other times as indicated by the value of ipIfStatsDiscontinuityTime.
.1.3.6.1.2.1.4.31.3.1.18,IP-MIB::ipIfStatsInDelivers,Counter32,read-only,,current,,The total number of datagrams successfully delivered to IP user-protocols (including ICMP). When tracking interface statistics, the counter of the interface to which these datagrams were addressed is incremented. This interface might not be the same as the input interface for some of the datagrams. Discontinuities in the value of this counter can occur at re-initialization of the management system, and at other times as indicated by the value of ipIfStatsDiscontinuityTime.
.1.3.6.1.2.1.4.31.3.1.19,IP-MIB::ipIfStatsHCInDelivers,Counter64,read-only,,current,,The total number of datagrams successfully delivered to IP user-protocols (including ICMP). This object counts the same packets as ipIfStatsInDelivers, but allows for larger values. Discontinuities in the value of this counter can occur at re-initialization of the management system, and at other times as indicated by the value of ipIfStatsDiscontinuityTime.
.1.3.6.1.2.1.4.31.3.1.20,IP-MIB::ipIfStatsOutRequests,Counter32,read-only,,current,,The total number of IP datagrams that local IP user- protocols (including ICMP) supplied to IP in requests for transmission. Note that this counter does not include any datagrams counted in ipIfStatsOutForwDatagrams. Discontinuities in the value of this counter can occur at re-initialization of the management system, and at other times as indicated by the value of ipIfStatsDiscontinuityTime.
.1.3.6.1.2.1.4.31.3.1.21,IP-MIB::ipIfStatsHCOutRequests,Counter64,read-only,,current,,The total number of IP datagrams that local IP user- protocols (including ICMP) supplied to IP in requests for transmission. This object counts the same packets as ipIfStatsOutRequests, but allows for larger values. Discontinuities in the value of this counter can occur at re-initialization of the management system, and at other times as indicated by the value of ipIfStatsDiscontinuityTime.
.1.3.6.1.2.1.4.31.3.1.23,IP-MIB::ipIfStatsOutForwDatagrams,Counter32,read-only,,current,,The number of datagrams for which this entity was not their final IP destination and for which it was successful in finding a path to their final destination. In entities that do not act as IP routers, this counter will include only those datagrams that were Source-Routed via this entity, and the Source-Route processing was successful. When tracking interface statistics, the counter of the outgoing interface is incremented for a successfully forwarded datagram. Discontinuities in the value of this counter can occur at re-initialization of the management system, and at other times as indicated by the value of ipIfStatsDiscontinuityTime.
.1.3.6.1.2.1.4.31.3.1.24,IP-MIB::ipIfStatsHCOutForwDatagrams,Counter64,read-only,,current,,The number of datagrams for which this entity was not their final IP destination and for which it was successful in finding a path to their final destination. This object counts the same packets as ipIfStatsOutForwDatagrams, but allows for larger values. Discontinuities in the value of this counter can occur at re-initialization of the management system, and at other times as indicated by the value of ipIfStatsDiscontinuityTime.
.1.3.6.1.2.1.4.31.3.1.25,IP-MIB::ipIfStatsOutDiscards,Counter32,read-only,,current,,The number of output IP datagrams for which no problem was encountered to prevent their transmission to their destination, but were discarded (e.g., for lack of buffer space). Note that this counter would include datagrams counted in ipIfStatsOutForwDatagrams if any such datagrams met this (discretionary) discard criterion. Discontinuities in the value of this counter can occur at re-initialization of the management system, and at other times as indicated by the value of ipIfStatsDiscontinuityTime.
.1.3.6.1.2.1.4.31.3.1.26,IP-MIB::ipIfStatsOutFragReqds,Counter32,read-only,,current,,The number of IP datagrams that would require fragmentation in order to be transmitted. When tracking interface statistics, the counter of the outgoing interface is incremented for a successfully fragmented datagram. Discontinuities in the value of this counter can occur at re-initialization of the management system, and at other times as indicated by the value of ipIfStatsDiscontinuityTime.
.1.3.6.1.2.1.4.31.3.1.27,IP-MIB::ipIfStatsOutFragOKs,Counter32,read-only,,current,,The number of IP datagrams that have been successfully fragmented. When tracking interface statistics, the counter of the outgoing interface is incremented for a successfully fragmented datagram. Discontinuities in the value of this counter can occur at re-initialization of the management system, and at other times as indicated by the value of ipIfStatsDiscontinuityTime.
.1.3.6.1.2.1.4.31.3.1.28,IP-MIB::ipIfStatsOutFragFails,Counter32,read-only,,current,,The number of IP datagrams that have been discarded because they needed to be fragmented but could not be. This includes IPv4 packets that have the DF bit set and IPv6 packets that are being forwarded and exceed the outgoing link MTU. When tracking interface statistics, the counter of the outgoing interface is incremented for an unsuccessfully fragmented datagram. Discontinuities in the value of this counter can occur at re-initialization of the management system, and at other times as indicated by the value of ipIfStatsDiscontinuityTime.
.1.3.6.1.2.1.4.31.3.1.29,IP-MIB::ipIfStatsOutFragCreates,Counter32,read-only,,current,,The number of output datagram fragments that have been generated as a result of IP fragmentation. When tracking interface statistics, the counter of the outgoing interface is incremented for a successfully fragmented datagram. Discontinuities in the value of this counter can occur at re-initialization of the management system, and at other times as indicated by the value of ipIfStatsDiscontinuityTime.
.1.3.6.1.2.1.4.31.3.1.30,IP-MIB::ipIfStatsOutTransmits,Counter32,read-only,,current,,The total number of IP datagrams that this entity supplied to the lower layers for transmission. This includes datagrams generated locally and those forwarded by this entity. Discontinuities in the value of this counter can occur at re-initialization of the management system, and at other times as indicated by the value of ipIfStatsDiscontinuityTime.
.1.3.6.1.2.1.4.31.3.1.31,IP-MIB::ipIfStatsHCOutTransmits,Counter64,read-only,,current,,The total number of IP datagrams that this entity supplied to the lower layers for transmission. This object counts the same datagrams as ipIfStatsOutTransmits, but allows for larger values. Discontinuities in the value of this counter can occur at re-initialization of the management system, and at other times as indicated by the value of ipIfStatsDiscontinuityTime.
.1.3.6.1.2.1.4.31.3.1.32,IP-MIB::ipIfStatsOutOctets,Counter32,read-only,,current,,The total number of octets in IP datagrams delivered to the lower layers for transmission. Octets from datagrams counted in ipIfStatsOutTransmits MUST be counted here. Discontinuities in the value of this counter can occur at re-initialization of the management system, and at other times as indicated by the value of ipIfStatsDiscontinuityTime.
.1.3.6.1.2.1.4.31.3.1.33,IP-MIB::ipIfStatsHCOutOctets,Counter64,read-only,,current,,The total number of octets in IP datagrams delivered to the lower layers for transmission. This objects counts the same octets as ipIfStatsOutOctets, but allows for larger values. Discontinuities in the value of this counter can occur at re-initialization of the management system, and at other times as indicated by the value of ipIfStatsDiscontinuityTime.
.1.3.6.1.2.1.4.31.3.1.34,IP-MIB::ipIfStatsInMcastPkts,Counter32,read-only,,current,,The number of IP multicast datagrams received. Discontinuities in the value of this counter can occur at re-initialization of the management system, and at other times as indicated by the value of ipIfStatsDiscontinuityTime.
.1.3.6.1.2.1.4.31.3.1.35,IP-MIB::ipIfStatsHCInMcastPkts,Counter64,read-only,,current,,The number of IP multicast datagrams received. This object counts the same datagrams as ipIfStatsInMcastPkts, but allows for larger values. Discontinuities in the value of this counter can occur at re-initialization of the management system, and at other times as indicated by the value of ipIfStatsDiscontinuityTime.
.1.3.6.1.2.1.4.31.3.1.36,IP-MIB::ipIfStatsInMcastOctets,Counter32,read-only,,current,,The total number of octets received in IP multicast datagrams. Octets from datagrams counted in ipIfStatsInMcastPkts MUST be counted here. Discontinuities in the value of this counter can occur at re-initialization of the management system, and at other times as indicated by the value of ipIfStatsDiscontinuityTime.
.1.3.6.1.2.1.4.31.3.1.37,IP-MIB::ipIfStatsHCInMcastOctets,Counter64,read-only,,current,,The total number of octets received in IP multicast datagrams. This object counts the same octets as ipIfStatsInMcastOctets, but allows for larger values. Discontinuities in the value of this counter can occur at re-initialization of the management system, and at other times as indicated by the value of ipIfStatsDiscontinuityTime.
.1.3.6.1.2.1.4.31.3.1.38,IP-MIB::ipIfStatsOutMcastPkts,Counter32,read-only,,current,,The number of IP multicast datagrams transmitted. Discontinuities in the value of this counter can occur at re-initialization of the management system, and at other times as indicated by the value of ipIfStatsDiscontinuityTime.
.1.3.6.1.2.1.4.31.3.1.39,IP-MIB::ipIfStatsHCOutMcastPkts,Counter64,read-only,,current,,The number of IP multicast datagrams transmitted. This object counts the same datagrams as ipIfStatsOutMcastPkts, but allows for larger values. Discontinuities in the value of this counter can occur at re-initialization of the management system, and at other times as indicated by the value of ipIfStatsDiscontinuityTime.
.1.3.6.1.2.1.4.31.3.1.40,IP-MIB::ipIfStatsOutMcastOctets,Counter32,read-only,,current,,The total number of octets transmitted in IP multicast datagrams. Octets from datagrams counted in ipIfStatsOutMcastPkts MUST be counted here. Discontinuities in the value of this counter can occur at re-initialization of the management system, and at other times as indicated by the value of ipIfStatsDiscontinuityTime.
.1.3.6.1.2.1.4.31.3.1.41,IP-MIB::ipIfStatsHCOutMcastOctets,Counter64,read-only,,current,,The total number of octets transmitted in IP multicast datagrams. This object counts the same octets as ipIfStatsOutMcastOctets, but allows for larger values. Discontinuities in the value of this counter can occur at re-initialization of the management system, and at other times as indicated by the value of ipIfStatsDiscontinuityTime.
.1.3.6.1.2.1.4.31.3.1.42,IP-MIB::ipIfStatsInBcastPkts,Counter32,read-only,,current,,The number of IP broadcast datagrams received. Discontinuities in the value of this counter can occur at re-initialization of the management system, and at other times as indicated by the value of ipIfStatsDiscontinuityTime.
.1.3.6.1.2.1.4.31.3.1.43,IP-MIB::ipIfStatsHCInBcastPkts,Counter64,read-only,,current,,The number of IP broadcast datagrams received. This object counts the same datagrams as ipIfStatsInBcastPkts, but allows for larger values. Discontinuities in the value of this counter can occur at re-initialization of the management system, and at other times as indicated by the value of ipIfStatsDiscontinuityTime.
.1.3.6.1.2.1.4.31.3.1.44,IP-MIB::ipIfStatsOutBcastPkts,Counter32,read-only,,current,,The number of IP broadcast datagrams transmitted. Discontinuities in the value of this counter can occur at re-initialization of the management system, and at other times as indicated by the value of ipIfStatsDiscontinuityTime.
.1.3.6.1.2.1.4.31.3.1.45,IP-MIB::ipIfStatsHCOutBcastPkts,Counter64,read-only,,current,,The number of IP broadcast datagrams transmitted. This object counts the same datagrams as ipIfStatsOutBcastPkts, but allows for larger values. Discontinuities in the value of this counter can occur at re-initialization of the management system, and at other times as indicated by the value of ipIfStatsDiscontinuityTime.
.1.3.6.1.2.1.4.31.3.1.46,IP-MIB::ipIfStatsDiscontinuityTime,TimeTicks,read-only,,current,,The value of sysUpTime on the most recent occasion at which any one or more of this entry's counters suffered a discontinuity. If no such discontinuities have occurred since the last re- initialization of the local management subsystem, then this object contains a zero value.
.1.3.6.1.2.1.4.31.3.1.47,IP-MIB::ipIfStatsRefreshRate,Unsigned32,read-only,,current,,The minimum reasonable polling interval for this entry. This object provides an indication of the minimum amount of time required to update the counters in this entry.
.1.3.6.1.2.1.4.32,IP-MIB::ipAddressPrefixTable,,not-accessible,,current,,This table allows the user to determine the source of an IP address or set of IP addresses, and allows other tables to share the information via pointer rather than by copying. For example, when the node configures both a unicast and anycast address for a prefix, the ipAddressPrefix objects for those addresses will point to a single row in this table. This table primarily provides support for IPv6 prefixes, and several of the objects are less meaningful for IPv4. The table continues to allow IPv4 addresses to allow future flexibility. In order to promote a common configuration, this document includes suggestions for default values for IPv4 prefixes. Each of these values may be overridden if an object is meaningful to the node. All prefixes used by this entity should be included in this table independent of how the entity learned the prefix. (This table isn't limited to prefixes learned from router advertisements.)
.1.3.6.1.2.1.4.32.1,IP-MIB::ipAddressPrefixEntry,,not-accessible,ipAddressPrefixIfIndex:ipAddressPrefixType:ipAddressPrefixPrefix:ipAddressPrefixLength,current,,An entry in the ipAddressPrefixTable.
.1.3.6.1.2.1.4.32.1.1,IP-MIB::ipAddressPrefixIfIndex,Integer32,not-accessible,,current,,The index value that uniquely identifies the interface on which this prefix is configured. The interface identified by a particular value of this index is the same interface as identified by the same value of the IF-MIB's ifIndex.
.1.3.6.1.2.1.4.32.1.2,IP-MIB::ipAddressPrefixType,INTEGER,not-accessible,,current,unknown(0):ipv4(1):ipv6(2):ipv4z(3):ipv6z(4):dns(16),The address type of ipAddressPrefix.
.1.3.6.1.2.1.4.32.1.3,IP-MIB::ipAddressPrefixPrefix,OCTET,not-accessible,,current,,The address prefix. The address type of this object is specified in ipAddressPrefixType. The length of this object is the standard length for objects of that type (4 or 16 bytes). Any bits after ipAddressPrefixLength must be zero. Implementors need to be aware that, if the size of ipAddressPrefixPrefix exceeds 114 octets, then OIDS of instances of columns in this row will have more than 128 sub-identifiers and cannot be accessed using SNMPv1, SNMPv2c, or SNMPv3.
.1.3.6.1.2.1.4.32.1.4,IP-MIB::ipAddressPrefixLength,Unsigned32,not-accessible,,current,,The prefix length associated with this prefix. The value 0 has no special meaning for this object. It simply refers to address '::/0'.
.1.3.6.1.2.1.4.32.1.5,IP-MIB::ipAddressPrefixOrigin,INTEGER,read-only,,current,other(1):manual(2):wellknown(3):dhcp(4):routeradv(5),The origin of this prefix.
.1.3.6.1.2.1.4.32.1.6,IP-MIB::ipAddressPrefixOnLinkFlag,INTEGER,read-only,,current,true(1):false(2),This object has the value 'true(1)', if this prefix can be used for on-link determination; otherwise, the value is 'false(2)'. The default for IPv4 prefixes is 'true(1)'.
.1.3.6.1.2.1.4.32.1.7,IP-MIB::ipAddressPrefixAutonomousFlag,INTEGER,read-only,,current,true(1):false(2),Autonomous address configuration flag. When true(1), indicates that this prefix can be used for autonomous address configuration (i.e., can be used to form a local interface address). If false(2), it is not used to auto- configure a local interface address. The default for IPv4 prefixes is 'false(2)'.
.1.3.6.1.2.1.4.32.1.8,IP-MIB::ipAddressPrefixAdvPreferredLifetime,Unsigned32,read-only,,current,,The remaining length of time, in seconds, that this prefix will continue to be preferred, i.e., time until deprecation. A value of 4,294,967,295 represents infinity. The address generated from a deprecated prefix should no longer be used as a source address in new communications, but packets received on such an interface are processed as expected. The default for IPv4 prefixes is 4,294,967,295 (infinity).
.1.3.6.1.2.1.4.32.1.9,IP-MIB::ipAddressPrefixAdvValidLifetime,Unsigned32,read-only,,current,,The remaining length of time, in seconds, that this prefix will continue to be valid, i.e., time until invalidation. A value of 4,294,967,295 represents infinity. The address generated from an invalidated prefix should not appear as the destination or source address of a packet. The default for IPv4 prefixes is 4,294,967,295 (infinity).
.1.3.6.1.2.1.4.33,IP-MIB::ipAddressSpinLock,INTEGER,read-write,,current,,An advisory lock used to allow cooperating SNMP managers to coordinate their use of the set operation in creating or modifying rows within this table. In order to use this lock to coordinate the use of set operations, managers should first retrieve ipAddressTableSpinLock. They should then determine the appropriate row to create or modify. Finally, they should issue the appropriate set command, including the retrieved value of ipAddressSpinLock. If another manager has altered the table in the meantime, then the value of ipAddressSpinLock will have changed, and the creation will fail as it will be specifying an incorrect value for ipAddressSpinLock. It is suggested, but not required, that the ipAddressSpinLock be the first var bind for each set of objects representing a 'row' in a PDU.
.1.3.6.1.2.1.4.34,IP-MIB::ipAddressTable,,not-accessible,,current,,This table contains addressing information relevant to the entity's interfaces. This table does not contain multicast address information. Tables for such information should be contained in multicast specific MIBs, such as RFC 3019. While this table is writable, the user will note that several objects, such as ipAddressOrigin, are not. The intention in allowing a user to write to this table is to allow them to add or remove any entry that isn't permanent. The user should be allowed to modify objects and entries when that would not cause inconsistencies within the table. Allowing write access to objects, such as ipAddressOrigin, could allow a user to insert an entry and then label it incorrectly. Note well: When including IPv6 link-local addresses in this table, the entry must use an InetAddressType of 'ipv6z' in order to differentiate between the possible interfaces.
.1.3.6.1.2.1.4.34.1,IP-MIB::ipAddressEntry,,not-accessible,ipAddressAddrType:ipAddressAddr,current,,An address mapping for a particular interface.
.1.3.6.1.2.1.4.34.1.1,IP-MIB::ipAddressAddrType,INTEGER,not-accessible,,current,unknown(0):ipv4(1):ipv6(2):ipv4z(3):ipv6z(4):dns(16),The address type of ipAddressAddr.
.1.3.6.1.2.1.4.34.1.2,IP-MIB::ipAddressAddr,OCTET,not-accessible,,current,,The IP address to which this entry's addressing information pertains. The address type of this object is specified in ipAddressAddrType. Implementors need to be aware that if the size of ipAddressAddr exceeds 116 octets, then OIDS of instances of columns in this row will have more than 128 sub-identifiers and cannot be accessed using SNMPv1, SNMPv2c, or SNMPv3.
.1.3.6.1.2.1.4.34.1.3,IP-MIB::ipAddressIfIndex,Integer32,read-create,,current,,The index value that uniquely identifies the interface to which this entry is applicable. The interface identified by a particular value of this index is the same interface as identified by the same value of the IF-MIB's ifIndex.
.1.3.6.1.2.1.4.34.1.4,IP-MIB::ipAddressType,INTEGER,read-create,,current,unicast(1):anycast(2):broadcast(3),The type of address. broadcast(3) is not a valid value for IPv6 addresses (RFC 3513).
.1.3.6.1.2.1.4.34.1.5,IP-MIB::ipAddressPrefix,OBJECT,read-only,,current,,A pointer to the row in the prefix table to which this address belongs. May be { 0 0 } if there is no such row.
.1.3.6.1.2.1.4.34.1.6,IP-MIB::ipAddressOrigin,INTEGER,read-only,,current,other(1):manual(2):dhcp(4):linklayer(5):random(6),The origin of the address.
.1.3.6.1.2.1.4.34.1.7,IP-MIB::ipAddressStatus,INTEGER,read-create,,current,preferred(1):deprecated(2):invalid(3):inaccessible(4):unknown(5):tentative(6):duplicate(7):optimistic(8),The status of the address, describing if the address can be used for communication. In the absence of other information, an IPv4 address is always preferred(1).
.1.3.6.1.2.1.4.34.1.8,IP-MIB::ipAddressCreated,TimeTicks,read-only,,current,,The value of sysUpTime at the time this entry was created. If this entry was created prior to the last re- initialization of the local network management subsystem, then this object contains a zero value.
.1.3.6.1.2.1.4.34.1.9,IP-MIB::ipAddressLastChanged,TimeTicks,read-only,,current,,The value of sysUpTime at the time this entry was last updated. If this entry was updated prior to the last re- initialization of the local network management subsystem, then this object contains a zero value.
.1.3.6.1.2.1.4.34.1.10,IP-MIB::ipAddressRowStatus,INTEGER,read-create,,current,active(1):notInService(2):notReady(3):createAndGo(4):createAndWait(5):destroy(6),The status of this conceptual row. The RowStatus TC requires that this DESCRIPTION clause states under which circumstances other objects in this row can be modified. The value of this object has no effect on whether other objects in this conceptual row can be modified. A conceptual row can not be made active until the ipAddressIfIndex has been set to a valid index.
.1.3.6.1.2.1.4.34.1.11,IP-MIB::ipAddressStorageType,INTEGER,read-create,,current,other(1):volatile(2):nonVolatile(3):permanent(4):readOnly(5),The storage type for this conceptual row. If this object has a value of 'permanent', then no other objects are required to be able to be modified.
.1.3.6.1.2.1.4.35,IP-MIB::ipNetToPhysicalTable,,not-accessible,,current,,The IP Address Translation table used for mapping from IP addresses to physical addresses. The Address Translation tables contain the IP address to 'physical' address equivalences. Some interfaces do not use translation tables for determining address equivalences (e.g., DDN-X.25 has an algorithmic method); if all interfaces are of this type, then the Address Translation table is empty, i.e., has zero entries. While many protocols may be used to populate this table, ARP and Neighbor Discovery are the most likely options.
.1.3.6.1.2.1.4.35.1,IP-MIB::ipNetToPhysicalEntry,,not-accessible,ipNetToPhysicalIfIndex:ipNetToPhysicalNetAddressType:ipNetToPhysicalNetAddress,current,,Each entry contains one IP address to `physical' address equivalence.
.1.3.6.1.2.1.4.35.1.1,IP-MIB::ipNetToPhysicalIfIndex,Integer32,not-accessible,,current,,The index value that uniquely identifies the interface to which this entry is applicable. The interface identified by a particular value of this index is the same interface as identified by the same value of the IF-MIB's ifIndex.
.1.3.6.1.2.1.4.35.1.2,IP-MIB::ipNetToPhysicalNetAddressType,INTEGER,not-accessible,,current,unknown(0):ipv4(1):ipv6(2):ipv4z(3):ipv6z(4):dns(16),The type of ipNetToPhysicalNetAddress.
.1.3.6.1.2.1.4.35.1.3,IP-MIB::ipNetToPhysicalNetAddress,OCTET,not-accessible,,current,,The IP Address corresponding to the media-dependent `physical' address. The address type of this object is specified in ipNetToPhysicalAddressType. Implementors need to be aware that if the size of ipNetToPhysicalNetAddress exceeds 115 octets, then OIDS of instances of columns in this row will have more than 128 sub-identifiers and cannot be accessed using SNMPv1, SNMPv2c, or SNMPv3.
.1.3.6.1.2.1.4.35.1.4,IP-MIB::ipNetToPhysicalPhysAddress,OCTET,read-create,,current,,The media-dependent `physical' address. As the entries in this table are typically not persistent when this object is written the entity SHOULD NOT save the change to non-volatile storage.
.1.3.6.1.2.1.4.35.1.5,IP-MIB::ipNetToPhysicalLastUpdated,TimeTicks,read-only,,current,,The value of sysUpTime at the time this entry was last updated. If this entry was updated prior to the last re- initialization of the local network management subsystem, then this object contains a zero value.
.1.3.6.1.2.1.4.35.1.6,IP-MIB::ipNetToPhysicalType,INTEGER,read-create,,current,other(1):invalid(2):dynamic(3):static(4):local(5),The type of mapping. Setting this object to the value invalid(2) has the effect of invalidating the corresponding entry in the ipNetToPhysicalTable. That is, it effectively dis- associates the interface identified with said entry from the mapping identified with said entry. It is an implementation-specific matter as to whether the agent removes an invalidated entry from the table. Accordingly, management stations must be prepared to receive tabular information from agents that corresponds to entries not currently in use. Proper interpretation of such entries requires examination of the relevant ipNetToPhysicalType object. The 'dynamic(3)' type indicates that the IP address to physical addresses mapping has been dynamically resolved using e.g., IPv4 ARP or the IPv6 Neighbor Discovery protocol. The 'static(4)' type indicates that the mapping has been statically configured. Both of these refer to entries that provide mappings for other entities addresses. The 'local(5)' type indicates that the mapping is provided for an entity's own interface address. As the entries in this table are typically not persistent when this object is written the entity SHOULD NOT save the change to non-volatile storage.
.1.3.6.1.2.1.4.35.1.7,IP-MIB::ipNetToPhysicalState,INTEGER,read-only,,current,reachable(1):stale(2):delay(3):probe(4):invalid(5):unknown(6):incomplete(7),The Neighbor Unreachability Detection state for the interface when the address mapping in this entry is used. If Neighbor Unreachability Detection is not in use (e.g. for IPv4), this object is always unknown(6).
.1.3.6.1.2.1.4.35.1.8,IP-MIB::ipNetToPhysicalRowStatus,INTEGER,read-create,,current,active(1):notInService(2):notReady(3):createAndGo(4):createAndWait(5):destroy(6),The status of this conceptual row. The RowStatus TC requires that this DESCRIPTION clause states under which circumstances other objects in this row can be modified. The value of this object has no effect on whether other objects in this conceptual row can be modified. A conceptual row can not be made active until the ipNetToPhysicalPhysAddress object has been set. Note that if the ipNetToPhysicalType is set to 'invalid', the managed node may delete the entry independent of the state of this object.
.1.3.6.1.2.1.4.36,IP-MIB::ipv6ScopeZoneIndexTable,,not-accessible,,current,,The table used to describe IPv6 unicast and multicast scope zones. For those objects that have names rather than numbers, the names were chosen to coincide with the names used in the IPv6 address architecture document. 
.1.3.6.1.2.1.4.36.1,IP-MIB::ipv6ScopeZoneIndexEntry,,not-accessible,ipv6ScopeZoneIndexIfIndex,current,,Each entry contains the list of scope identifiers on a given interface.
.1.3.6.1.2.1.4.36.1.1,IP-MIB::ipv6ScopeZoneIndexIfIndex,Integer32,not-accessible,,current,,The index value that uniquely identifies the interface to which these scopes belong. The interface identified by a particular value of this index is the same interface as identified by the same value of the IF-MIB's ifIndex.
.1.3.6.1.2.1.4.36.1.2,IP-MIB::ipv6ScopeZoneIndexLinkLocal,Unsigned32,read-only,,current,,The zone index for the link-local scope on this interface.
.1.3.6.1.2.1.4.36.1.3,IP-MIB::ipv6ScopeZoneIndex3,Unsigned32,read-only,,current,,The zone index for scope 3 on this interface.
.1.3.6.1.2.1.4.36.1.4,IP-MIB::ipv6ScopeZoneIndexAdminLocal,Unsigned32,read-only,,current,,The zone index for the admin-local scope on this interface.
.1.3.6.1.2.1.4.36.1.5,IP-MIB::ipv6ScopeZoneIndexSiteLocal,Unsigned32,read-only,,current,,The zone index for the site-local scope on this interface.
.1.3.6.1.2.1.4.36.1.6,IP-MIB::ipv6ScopeZoneIndex6,Unsigned32,read-only,,current,,The zone index for scope 6 on this interface.
.1.3.6.1.2.1.4.36.1.7,IP-MIB::ipv6ScopeZoneIndex7,Unsigned32,read-only,,current,,The zone index for scope 7 on this interface.
.1.3.6.1.2.1.4.36.1.8,IP-MIB::ipv6ScopeZoneIndexOrganizationLocal,Unsigned32,read-only,,current,,The zone index for the organization-local scope on this interface.
.1.3.6.1.2.1.4.36.1.9,IP-MIB::ipv6ScopeZoneIndex9,Unsigned32,read-only,,current,,The zone index for scope 9 on this interface.
.1.3.6.1.2.1.4.36.1.10,IP-MIB::ipv6ScopeZoneIndexA,Unsigned32,read-only,,current,,The zone index for scope A on this interface.
.1.3.6.1.2.1.4.36.1.11,IP-MIB::ipv6ScopeZoneIndexB,Unsigned32,read-only,,current,,The zone index for scope B on this interface.
.1.3.6.1.2.1.4.36.1.12,IP-MIB::ipv6ScopeZoneIndexC,Unsigned32,read-only,,current,,The zone index for scope C on this interface.
.1.3.6.1.2.1.4.36.1.13,IP-MIB::ipv6ScopeZoneIndexD,Unsigned32,read-only,,current,,The zone index for scope D on this interface.
.1.3.6.1.2.1.4.37,IP-MIB::ipDefaultRouterTable,,not-accessible,,current,,The table used to describe the default routers known to this entity.
.1.3.6.1.2.1.4.37.1,IP-MIB::ipDefaultRouterEntry,,not-accessible,ipDefaultRouterAddressType:ipDefaultRouterAddress:ipDefaultRouterIfIndex,current,,Each entry contains information about a default router known to this entity.
.1.3.6.1.2.1.4.37.1.1,IP-MIB::ipDefaultRouterAddressType,INTEGER,not-accessible,,current,unknown(0):ipv4(1):ipv6(2):ipv4z(3):ipv6z(4):dns(16),The address type for this row.
.1.3.6.1.2.1.4.37.1.2,IP-MIB::ipDefaultRouterAddress,OCTET,not-accessible,,current,,The IP address of the default router represented by this row. The address type of this object is specified in ipDefaultRouterAddressType. Implementers need to be aware that if the size of ipDefaultRouterAddress exceeds 115 octets, then OIDS of instances of columns in this row will have more than 128 sub-identifiers and cannot be accessed using SNMPv1, SNMPv2c, or SNMPv3.
.1.3.6.1.2.1.4.37.1.3,IP-MIB::ipDefaultRouterIfIndex,Integer32,not-accessible,,current,,The index value that uniquely identifies the interface by which the router can be reached. The interface identified by a particular value of this index is the same interface as identified by the same value of the IF-MIB's ifIndex.
.1.3.6.1.2.1.4.37.1.4,IP-MIB::ipDefaultRouterLifetime,Unsigned32,read-only,,current,,The remaining length of time, in seconds, that this router will continue to be useful as a default router. A value of zero indicates that it is no longer useful as a default router. It is left to the implementer of the MIB as to whether a router with a lifetime of zero is removed from the list. For IPv6, this value should be extracted from the router advertisement messages.
.1.3.6.1.2.1.4.37.1.5,IP-MIB::ipDefaultRouterPreference,INTEGER,read-only,,current,reserved(-2):low(-1):medium(0):high(1),An indication of preference given to this router as a default router as described in he Default Router Preferences document. Treating the value as a 2 bit signed integer allows for simple arithmetic comparisons. For IPv4 routers or IPv6 routers that are not using the updated router advertisement format, this object is set to medium (0).
.1.3.6.1.2.1.4.38,IP-MIB::ipv6RouterAdvertSpinLock,INTEGER,read-write,,current,,An advisory lock used to allow cooperating SNMP managers to coordinate their use of the set operation in creating or modifying rows within this table. In order to use this lock to coordinate the use of set operations, managers should first retrieve ipv6RouterAdvertSpinLock. They should then determine the appropriate row to create or modify. Finally, they should issue the appropriate set command including the retrieved value of ipv6RouterAdvertSpinLock. If another manager has altered the table in the meantime, then the value of ipv6RouterAdvertSpinLock will have changed and the creation will fail as it will be specifying an incorrect value for ipv6RouterAdvertSpinLock. It is suggested, but not required, that the ipv6RouterAdvertSpinLock be the first var bind for each set of objects representing a 'row' in a PDU.
.1.3.6.1.2.1.4.39,IP-MIB::ipv6RouterAdvertTable,,not-accessible,,current,,The table containing information used to construct router advertisements.
.1.3.6.1.2.1.4.39.1,IP-MIB::ipv6RouterAdvertEntry,,not-accessible,ipv6RouterAdvertIfIndex,current,,An entry containing information used to construct router advertisements. Information in this table is persistent, and when this object is written, the entity SHOULD save the change to non-volatile storage.
.1.3.6.1.2.1.4.39.1.1,IP-MIB::ipv6RouterAdvertIfIndex,Integer32,not-accessible,,current,,The index value that uniquely identifies the interface on which router advertisements constructed with this information will be transmitted. The interface identified by a particular value of this index is the same interface as identified by the same value of the IF-MIB's ifIndex.
.1.3.6.1.2.1.4.39.1.2,IP-MIB::ipv6RouterAdvertSendAdverts,INTEGER,read-create,,current,true(1):false(2),A flag indicating whether the router sends periodic router advertisements and responds to router solicitations on this interface.
.1.3.6.1.2.1.4.39.1.3,IP-MIB::ipv6RouterAdvertMaxInterval,Unsigned32,read-create,,current,,The maximum time allowed between sending unsolicited router advertisements from this interface.
.1.3.6.1.2.1.4.39.1.4,IP-MIB::ipv6RouterAdvertMinInterval,Unsigned32,read-create,,current,,The minimum time allowed between sending unsolicited router advertisements from this interface. The default is 0.33 * ipv6RouterAdvertMaxInterval, however, in the case of a low value for ipv6RouterAdvertMaxInterval, the minimum value for this object is restricted to 3.
.1.3.6.1.2.1.4.39.1.5,IP-MIB::ipv6RouterAdvertManagedFlag,INTEGER,read-create,,current,true(1):false(2),The true/false value to be placed into the 'managed address configuration' flag field in router advertisements sent from this interface.
.1.3.6.1.2.1.4.39.1.6,IP-MIB::ipv6RouterAdvertOtherConfigFlag,INTEGER,read-create,,current,true(1):false(2),The true/false value to be placed into the 'other stateful configuration' flag field in router advertisements sent from this interface.
.1.3.6.1.2.1.4.39.1.7,IP-MIB::ipv6RouterAdvertLinkMTU,Unsigned32,read-create,,current,,The value to be placed in MTU options sent by the router on this interface. A value of zero indicates that no MTU options are sent.
.1.3.6.1.2.1.4.39.1.8,IP-MIB::ipv6RouterAdvertReachableTime,Unsigned32,read-create,,current,,The value to be placed in the reachable time field in router advertisement messages sent from this interface. A value of zero in the router advertisement indicates that the advertisement isn't specifying a value for reachable time.
.1.3.6.1.2.1.4.39.1.9,IP-MIB::ipv6RouterAdvertRetransmitTime,Unsigned32,read-create,,current,,The value to be placed in the retransmit timer field in router advertisements sent from this interface. A value of zero in the router advertisement indicates that the advertisement isn't specifying a value for retrans time.
.1.3.6.1.2.1.4.39.1.10,IP-MIB::ipv6RouterAdvertCurHopLimit,Unsigned32,read-create,,current,,The default value to be placed in the current hop limit field in router advertisements sent from this interface. The value should be set to the current diameter of the Internet. A value of zero in the router advertisement indicates that the advertisement isn't specifying a value for curHopLimit. The default should be set to the value specified in the IANA web pages (www.iana.org) at the time of implementation.
.1.3.6.1.2.1.4.39.1.11,IP-MIB::ipv6RouterAdvertDefaultLifetime,Unsigned32,read-create,,current,,The value to be placed in the router lifetime field of router advertisements sent from this interface. This value MUST be either 0 or between ipv6RouterAdvertMaxInterval and 9000 seconds. A value of zero indicates that the router is not to be used as a default router. The default is 3 * ipv6RouterAdvertMaxInterval.
.1.3.6.1.2.1.4.39.1.12,IP-MIB::ipv6RouterAdvertRowStatus,INTEGER,read-create,,current,active(1):notInService(2):notReady(3):createAndGo(4):createAndWait(5):destroy(6),The status of this conceptual row. As all objects in this conceptual row have default values, a row can be created and made active by setting this object appropriately. The RowStatus TC requires that this DESCRIPTION clause states under which circumstances other objects in this row can be modified. The value of this object has no effect on whether other objects in this conceptual row can be modified.
.1.3.6.1.2.1.5,RFC1213-MIB::icmp,,,,,,
.1.3.6.1.2.1.5.1,RFC1213-MIB::icmpInMsgs,Counter32,read-only,,mandatory,,The total number of ICMP messages which the entity received. Note that this counter includes all those counted by icmpInErrors.
.1.3.6.1.2.1.5.2,RFC1213-MIB::icmpInErrors,Counter32,read-only,,mandatory,,The number of ICMP messages which the entity received but determined as having ICMP-specific errors (bad ICMP checksums, bad length, etc.).
.1.3.6.1.2.1.5.3,RFC1213-MIB::icmpInDestUnreachs,Counter32,read-only,,mandatory,,The number of ICMP Destination Unreachable messages received.
.1.3.6.1.2.1.5.4,RFC1213-MIB::icmpInTimeExcds,Counter32,read-only,,mandatory,,The number of ICMP Time Exceeded messages received.
.1.3.6.1.2.1.5.5,RFC1213-MIB::icmpInParmProbs,Counter32,read-only,,mandatory,,The number of ICMP Parameter Problem messages received.
.1.3.6.1.2.1.5.6,RFC1213-MIB::icmpInSrcQuenchs,Counter32,read-only,,mandatory,,The number of ICMP Source Quench messages received.
.1.3.6.1.2.1.5.7,RFC1213-MIB::icmpInRedirects,Counter32,read-only,,mandatory,,The number of ICMP Redirect messages received.
.1.3.6.1.2.1.5.8,RFC1213-MIB::icmpInEchos,Counter32,read-only,,mandatory,,The number of ICMP Echo (request) messages received.
.1.3.6.1.2.1.5.9,RFC1213-MIB::icmpInEchoReps,Counter32,read-only,,mandatory,,The number of ICMP Echo Reply messages received.
.1.3.6.1.2.1.5.10,RFC1213-MIB::icmpInTimestamps,Counter32,read-only,,mandatory,,The number of ICMP Timestamp (request) messages received.
.1.3.6.1.2.1.5.11,RFC1213-MIB::icmpInTimestampReps,Counter32,read-only,,mandatory,,The number of ICMP Timestamp Reply messages received.
.1.3.6.1.2.1.5.12,RFC1213-MIB::icmpInAddrMasks,Counter32,read-only,,mandatory,,The number of ICMP Address Mask Request messages received.
.1.3.6.1.2.1.5.13,RFC1213-MIB::icmpInAddrMaskReps,Counter32,read-only,,mandatory,,The number of ICMP Address Mask Reply messages received.
.1.3.6.1.2.1.5.14,RFC1213-MIB::icmpOutMsgs,Counter32,read-only,,mandatory,,The total number of ICMP messages which this entity attempted to send. Note that this counter includes all those counted by icmpOutErrors.
.1.3.6.1.2.1.5.15,RFC1213-MIB::icmpOutErrors,Counter32,read-only,,mandatory,,The number of ICMP messages which this entity did not send due to problems discovered within ICMP such as a lack of buffers. This value should not include errors discovered outside the ICMP layer such as the inability of IP to route the resultant datagram. In some implementations there may be no types of error which contribute to this counter's value.
.1.3.6.1.2.1.5.16,RFC1213-MIB::icmpOutDestUnreachs,Counter32,read-only,,mandatory,,The number of ICMP Destination Unreachable messages sent.
.1.3.6.1.2.1.5.17,RFC1213-MIB::icmpOutTimeExcds,Counter32,read-only,,mandatory,,The number of ICMP Time Exceeded messages sent.
.1.3.6.1.2.1.5.18,RFC1213-MIB::icmpOutParmProbs,Counter32,read-only,,mandatory,,The number of ICMP Parameter Problem messages sent.
.1.3.6.1.2.1.5.19,RFC1213-MIB::icmpOutSrcQuenchs,Counter32,read-only,,mandatory,,The number of ICMP Source Quench messages sent.
.1.3.6.1.2.1.5.20,RFC1213-MIB::icmpOutRedirects,Counter32,read-only,,mandatory,,The number of ICMP Redirect messages sent. For a host, this object will always be zero, since hosts do not send redirects.
.1.3.6.1.2.1.5.21,RFC1213-MIB::icmpOutEchos,Counter32,read-only,,mandatory,,The number of ICMP Echo (request) messages sent.
.1.3.6.1.2.1.5.22,RFC1213-MIB::icmpOutEchoReps,Counter32,read-only,,mandatory,,The number of ICMP Echo Reply messages sent.
.1.3.6.1.2.1.5.23,RFC1213-MIB::icmpOutTimestamps,Counter32,read-only,,mandatory,,The number of ICMP Timestamp (request) messages sent.
.1.3.6.1.2.1.5.24,RFC1213-MIB::icmpOutTimestampReps,Counter32,read-only,,mandatory,,The number of ICMP Timestamp Reply messages sent.
.1.3.6.1.2.1.5.25,RFC1213-MIB::icmpOutAddrMasks,Counter32,read-only,,mandatory,,The number of ICMP Address Mask Request messages sent.
.1.3.6.1.2.1.5.26,RFC1213-MIB::icmpOutAddrMaskReps,Counter32,read-only,,mandatory,,The number of ICMP Address Mask Reply messages sent.
.1.3.6.1.2.1.5.29,IP-MIB::icmpStatsTable,,not-accessible,,current,,The table of generic system-wide ICMP counters.
.1.3.6.1.2.1.5.29.1,IP-MIB::icmpStatsEntry,,not-accessible,icmpStatsIPVersion,current,,A conceptual row in the icmpStatsTable.
.1.3.6.1.2.1.5.29.1.1,IP-MIB::icmpStatsIPVersion,INTEGER,not-accessible,,current,unknown(0):ipv4(1):ipv6(2),The IP version of the statistics.
.1.3.6.1.2.1.5.29.1.2,IP-MIB::icmpStatsInMsgs,Counter32,read-only,,current,,The total number of ICMP messages that the entity received. Note that this counter includes all those counted by icmpStatsInErrors.
.1.3.6.1.2.1.5.29.1.3,IP-MIB::icmpStatsInErrors,Counter32,read-only,,current,,The number of ICMP messages that the entity received but determined as having ICMP-specific errors (bad ICMP checksums, bad length, etc.).
.1.3.6.1.2.1.5.29.1.4,IP-MIB::icmpStatsOutMsgs,Counter32,read-only,,current,,The total number of ICMP messages that the entity attempted to send. Note that this counter includes all those counted by icmpStatsOutErrors.
.1.3.6.1.2.1.5.29.1.5,IP-MIB::icmpStatsOutErrors,Counter32,read-only,,current,,The number of ICMP messages that this entity did not send due to problems discovered within ICMP, such as a lack of buffers. This value should not include errors discovered outside the ICMP layer, such as the inability of IP to route the resultant datagram. In some implementations, there may be no types of error that contribute to this counter's value.
.1.3.6.1.2.1.5.30,IP-MIB::icmpMsgStatsTable,,not-accessible,,current,,The table of system-wide per-version, per-message type ICMP counters.
.1.3.6.1.2.1.5.30.1,IP-MIB::icmpMsgStatsEntry,,not-accessible,icmpMsgStatsIPVersion:icmpMsgStatsType,current,,A conceptual row in the icmpMsgStatsTable. The system should track each ICMP type value, even if that ICMP type is not supported by the system. However, a given row need not be instantiated unless a message of that type has been processed, i.e., the row for icmpMsgStatsType=X MAY be instantiated before but MUST be instantiated after the first message with Type=X is received or transmitted. After receiving or transmitting any succeeding messages with Type=X, the relevant counter must be incremented.
.1.3.6.1.2.1.5.30.1.1,IP-MIB::icmpMsgStatsIPVersion,INTEGER,not-accessible,,current,unknown(0):ipv4(1):ipv6(2),The IP version of the statistics.
.1.3.6.1.2.1.5.30.1.2,IP-MIB::icmpMsgStatsType,Integer32,not-accessible,,current,,The ICMP type field of the message type being counted by this row. Note that ICMP message types are scoped by the address type in use.
.1.3.6.1.2.1.5.30.1.3,IP-MIB::icmpMsgStatsInPkts,Counter32,read-only,,current,,The number of input packets for this AF and type.
.1.3.6.1.2.1.5.30.1.4,IP-MIB::icmpMsgStatsOutPkts,Counter32,read-only,,current,,The number of output packets for this AF and type.
.1.3.6.1.2.1.6,RFC1213-MIB::tcp,,,,,,
.1.3.6.1.2.1.6.1,RFC1213-MIB::tcpRtoAlgorithm,INTEGER,read-only,,mandatory,other(1):constant(2):rsre(3):vanj(4),The algorithm used to determine the timeout value used for retransmitting unacknowledged octets.
.1.3.6.1.2.1.6.2,RFC1213-MIB::tcpRtoMin,INTEGER,read-only,,mandatory,,The minimum value permitted by a TCP implementation for the retransmission timeout, measured in milliseconds. More refined semantics for objects of this type depend upon the algorithm used to determine the retransmission timeout. In particular, when the timeout algorithm is rsre(3), an object of this type has the semantics of the LBOUND quantity described in RFC 793.
.1.3.6.1.2.1.6.3,RFC1213-MIB::tcpRtoMax,INTEGER,read-only,,mandatory,,The maximum value permitted by a TCP implementation for the retransmission timeout, measured in milliseconds. More refined semantics for objects of this type depend upon the algorithm used to determine the retransmission timeout. In particular, when the timeout algorithm is rsre(3), an object of this type has the semantics of the UBOUND quantity described in RFC 793.
.1.3.6.1.2.1.6.4,RFC1213-MIB::tcpMaxConn,INTEGER,read-only,,mandatory,,The limit on the total number of TCP connections the entity can support. In entities where the maximum number of connections is dynamic, this object should contain the value -1.
.1.3.6.1.2.1.6.5,RFC1213-MIB::tcpActiveOpens,Counter32,read-only,,mandatory,,The number of times TCP connections have made a direct transition to the SYN-SENT state from the CLOSED state.
.1.3.6.1.2.1.6.6,RFC1213-MIB::tcpPassiveOpens,Counter32,read-only,,mandatory,,The number of times TCP connections have made a direct transition to the SYN-RCVD state from the LISTEN state.
.1.3.6.1.2.1.6.7,RFC1213-MIB::tcpAttemptFails,Counter32,read-only,,mandatory,,The number of times TCP connections have made a direct transition to the CLOSED state from either the SYN-SENT state or the SYN-RCVD state, plus the number of times TCP connections have made a direct transition to the LISTEN state from the SYN-RCVD state.
.1.3.6.1.2.1.6.8,RFC1213-MIB::tcpEstabResets,Counter32,read-only,,mandatory,,The number of times TCP connections have made a direct transition to the CLOSED state from either the ESTABLISHED state or the CLOSE-WAIT state.
.1.3.6.1.2.1.6.9,RFC1213-MIB::tcpCurrEstab,Gauge32,read-only,,mandatory,,The number of TCP connections for which the current state is either ESTABLISHED or CLOSE- WAIT.
.1.3.6.1.2.1.6.10,RFC1213-MIB::tcpInSegs,Counter32,read-only,,mandatory,,The total number of segments received, including those received in error. This count includes segments received on currently established connections.
.1.3.6.1.2.1.6.11,RFC1213-MIB::tcpOutSegs,Counter32,read-only,,mandatory,,The total number of segments sent, including those on current connections but excluding those containing only retransmitted octets.
.1.3.6.1.2.1.6.12,RFC1213-MIB::tcpRetransSegs,Counter32,read-only,,mandatory,,The total number of segments retransmitted - that is, the number of TCP segments transmitted containing one or more previously transmitted octets.
.1.3.6.1.2.1.6.13,RFC1213-MIB::tcpConnTable,,not-accessible,,mandatory,,A table containing TCP connection-specific information.
.1.3.6.1.2.1.6.13.1,RFC1213-MIB::tcpConnEntry,,not-accessible,tcpConnLocalAddress:tcpConnLocalPort:tcpConnRemAddress:tcpConnRemPort,mandatory,,Information about a particular current TCP connection. An object of this type is transient, in that it ceases to exist when (or soon after) the connection makes the transition to the CLOSED state.
.1.3.6.1.2.1.6.13.1.1,RFC1213-MIB::tcpConnState,INTEGER,read-write,,mandatory,closed(1):listen(2):synSent(3):synReceived(4):established(5):finWait1(6):finWait2(7):closeWait(8):lastAck(9):closing(10):timeWait(11):deleteTCB(12),The state of this TCP connection. The only value which may be set by a management station is deleteTCB(12). Accordingly, it is appropriate for an agent to return a `badValue' response if a management station attempts to set this object to any other value. If a management station sets this object to the value deleteTCB(12), then this has the effect of deleting the TCB (as defined in RFC 793) of the corresponding connection on the managed node, resulting in immediate termination of the connection. As an implementation-specific option, a RST segment may be sent from the managed node to the other TCP endpoint (note however that RST segments are not sent reliably).
.1.3.6.1.2.1.6.13.1.2,RFC1213-MIB::tcpConnLocalAddress,IpAddress,read-only,,mandatory,,The local IP address for this TCP connection. In the case of a connection in the listen state which is willing to accept connections for any IP interface associated with the node, the value 0.0.0.0 is used.
.1.3.6.1.2.1.6.13.1.3,RFC1213-MIB::tcpConnLocalPort,INTEGER,read-only,,mandatory,,The local port number for this TCP connection.
.1.3.6.1.2.1.6.13.1.4,RFC1213-MIB::tcpConnRemAddress,IpAddress,read-only,,mandatory,,The remote IP address for this TCP connection.
.1.3.6.1.2.1.6.13.1.5,RFC1213-MIB::tcpConnRemPort,INTEGER,read-only,,mandatory,,The remote port number for this TCP connection.
.1.3.6.1.2.1.6.14,RFC1213-MIB::tcpInErrs,Counter32,read-only,,mandatory,,The total number of segments received in error (e.g., bad TCP checksums).
.1.3.6.1.2.1.6.15,RFC1213-MIB::tcpOutRsts,Counter32,read-only,,mandatory,,The number of TCP segments sent containing the RST flag.
.1.3.6.1.2.1.7,RFC1213-MIB::udp,,,,,,
.1.3.6.1.2.1.7.1,RFC1213-MIB::udpInDatagrams,Counter32,read-only,,mandatory,,The total number of UDP datagrams delivered to UDP users.
.1.3.6.1.2.1.7.2,RFC1213-MIB::udpNoPorts,Counter32,read-only,,mandatory,,The total number of received UDP datagrams for which there was no application at the destination port.
.1.3.6.1.2.1.7.3,RFC1213-MIB::udpInErrors,Counter32,read-only,,mandatory,,The number of received UDP datagrams that could not be delivered for reasons other than the lack of an application at the destination port.
.1.3.6.1.2.1.7.4,RFC1213-MIB::udpOutDatagrams,Counter32,read-only,,mandatory,,The total number of UDP datagrams sent from this entity.
.1.3.6.1.2.1.7.5,RFC1213-MIB::udpTable,,not-accessible,,mandatory,,A table containing UDP listener information.
.1.3.6.1.2.1.7.5.1,RFC1213-MIB::udpEntry,,not-accessible,udpLocalAddress:udpLocalPort,mandatory,,Information about a particular current UDP listener.
.1.3.6.1.2.1.7.5.1.1,RFC1213-MIB::udpLocalAddress,IpAddress,read-only,,mandatory,,The local IP address for this UDP listener. In the case of a UDP listener which is willing to accept datagrams for any IP interface associated with the node, the value 0.0.0.0 is used.
.1.3.6.1.2.1.7.5.1.2,RFC1213-MIB::udpLocalPort,INTEGER,read-only,,mandatory,,The local port number for this UDP listener.
.1.3.6.1.2.1.8,RFC1213-MIB::egp,,,,,,
.1.3.6.1.2.1.8.1,RFC1213-MIB::egpInMsgs,Counter32,read-only,,mandatory,,The number of EGP messages received without error.
.1.3.6.1.2.1.8.2,RFC1213-MIB::egpInErrors,Counter32,read-only,,mandatory,,The number of EGP messages received that proved to be in error.
.1.3.6.1.2.1.8.3,RFC1213-MIB::egpOutMsgs,Counter32,read-only,,mandatory,,The total number of locally generated EGP messages.
.1.3.6.1.2.1.8.4,RFC1213-MIB::egpOutErrors,Counter32,read-only,,mandatory,,The number of locally generated EGP messages not sent due to resource limitations within an EGP entity.
.1.3.6.1.2.1.8.5,RFC1213-MIB::egpNeighTable,,not-accessible,,mandatory,,The EGP neighbor table.
.1.3.6.1.2.1.8.5.1,RFC1213-MIB::egpNeighEntry,,not-accessible,egpNeighAddr,mandatory,,Information about this entity's relationship with a particular EGP neighbor.
.1.3.6.1.2.1.8.5.1.1,RFC1213-MIB::egpNeighState,INTEGER,read-only,,mandatory,idle(1):acquisition(2):down(3):up(4):cease(5),The EGP state of the local system with respect to this entry's EGP neighbor. Each EGP state is represented by a value that is one greater than the numerical value associated with said state in RFC 904.
.1.3.6.1.2.1.8.5.1.2,RFC1213-MIB::egpNeighAddr,IpAddress,read-only,,mandatory,,The IP address of this entry's EGP neighbor.
.1.3.6.1.2.1.8.5.1.3,RFC1213-MIB::egpNeighAs,INTEGER,read-only,,mandatory,,The autonomous system of this EGP peer. Zero should be specified if the autonomous system number of the neighbor is not yet known.
.1.3.6.1.2.1.8.5.1.4,RFC1213-MIB::egpNeighInMsgs,Counter32,read-only,,mandatory,,The number of EGP messages received without error from this EGP peer.
.1.3.6.1.2.1.8.5.1.5,RFC1213-MIB::egpNeighInErrs,Counter32,read-only,,mandatory,,The number of EGP messages received from this EGP peer that proved to be in error (e.g., bad EGP checksum).
.1.3.6.1.2.1.8.5.1.6,RFC1213-MIB::egpNeighOutMsgs,Counter32,read-only,,mandatory,,The number of locally generated EGP messages to this EGP peer.
.1.3.6.1.2.1.8.5.1.7,RFC1213-MIB::egpNeighOutErrs,Counter32,read-only,,mandatory,,The number of locally generated EGP messages not sent to this EGP peer due to resource limitations within an EGP entity.
.1.3.6.1.2.1.8.5.1.8,RFC1213-MIB::egpNeighInErrMsgs,Counter32,read-only,,mandatory,,The number of EGP-defined error messages received from this EGP peer.
.1.3.6.1.2.1.8.5.1.9,RFC1213-MIB::egpNeighOutErrMsgs,Counter32,read-only,,mandatory,,The number of EGP-defined error messages sent to this EGP peer.
.1.3.6.1.2.1.8.5.1.10,RFC1213-MIB::egpNeighStateUps,Counter32,read-only,,mandatory,,The number of EGP state transitions to the UP state with this EGP peer.
.1.3.6.1.2.1.8.5.1.11,RFC1213-MIB::egpNeighStateDowns,Counter32,read-only,,mandatory,,The number of EGP state transitions from the UP state to any other state with this EGP peer.
.1.3.6.1.2.1.8.5.1.12,RFC1213-MIB::egpNeighIntervalHello,INTEGER,read-only,,mandatory,,The interval between EGP Hello command retransmissions (in hundredths of a second). This represents the t1 timer as defined in RFC 904.
.1.3.6.1.2.1.8.5.1.13,RFC1213-MIB::egpNeighIntervalPoll,INTEGER,read-only,,mandatory,,The interval between EGP poll command retransmissions (in hundredths of a second). This represents the t3 timer as defined in RFC 904.
.1.3.6.1.2.1.8.5.1.14,RFC1213-MIB::egpNeighMode,INTEGER,read-only,,mandatory,active(1):passive(2),The polling mode of this EGP entity, either passive or active.
.1.3.6.1.2.1.8.5.1.15,RFC1213-MIB::egpNeighEventTrigger,INTEGER,read-write,,mandatory,start(1):stop(2),A control variable used to trigger operator- initiated Start and Stop events. When read, this variable always returns the most recent value that egpNeighEventTrigger was set to. If it has not been set since the last initialization of the network management subsystem on the node, it returns a value of `stop'. When set, this variable causes a Start or Stop event on the specified neighbor, as specified on pages 8-10 of RFC 904. Briefly, a Start event causes an Idle peer to begin neighbor acquisition and a non-Idle peer to reinitiate neighbor acquisition. A stop event causes a non-Idle peer to return to the Idle state until a Start event occurs, either via egpNeighEventTrigger or otherwise.
.1.3.6.1.2.1.8.6,RFC1213-MIB::egpAs,INTEGER,read-only,,mandatory,,The autonomous system number of this EGP entity.
.1.3.6.1.2.1.10,SNMPv2-SMI::transmission,,,,,,
.1.3.6.1.2.1.10.21,DIAL-CONTROL-MIB::dialControlMib,,,,,,The MIB module to describe peer information for demand access and possibly other kinds of interfaces.
.1.3.6.1.2.1.10.21.1,DIAL-CONTROL-MIB::dialControlMibObjects,,,,,,
.1.3.6.1.2.1.10.21.1.1,DIAL-CONTROL-MIB::dialCtlConfiguration,,,,,,
.1.3.6.1.2.1.10.21.1.1.1,DIAL-CONTROL-MIB::dialCtlAcceptMode,INTEGER,read-write,,current,acceptNone(1):acceptAll(2):acceptKnown(3),The security level for acceptance of incoming calls. acceptNone(1) - incoming calls will not be accepted acceptAll(2) - incoming calls will be accepted, even if there is no matching entry in the dialCtlPeerCfgTable acceptKnown(3) - incoming calls will be accepted only if there is a matching entry in the dialCtlPeerCfgTable 
.1.3.6.1.2.1.10.21.1.1.2,DIAL-CONTROL-MIB::dialCtlTrapEnable,INTEGER,read-write,,current,enabled(1):disabled(2),This object indicates whether dialCtlPeerCallInformation and dialCtlPeerCallSetup traps should be generated for all peers. If the value of this object is enabled(1), traps will be generated for all peers. If the value of this object is disabled(2), traps will be generated only for peers having dialCtlPeerCfgTrapEnable set to enabled(1).
.1.3.6.1.2.1.10.21.1.2,DIAL-CONTROL-MIB::dialCtlPeer,,,,,,
.1.3.6.1.2.1.10.21.1.2.1,DIAL-CONTROL-MIB::dialCtlPeerCfgTable,,not-accessible,,current,,The list of peers from which the managed device will accept calls or to which it will place them.
.1.3.6.1.2.1.10.21.1.2.1.1,DIAL-CONTROL-MIB::dialCtlPeerCfgEntry,,not-accessible,dialCtlPeerCfgId:ifIndex,current,,Configuration data for a single Peer. This entry is effectively permanent, and contains information to identify the peer, how to connect to the peer, how to identify the peer and its permissions. The value of dialCtlPeerCfgOriginateAddress must be specified before a new row in this table can become active(1). Any writeable parameters in an existing entry can be modified while the entry is active. The modification will take effect when the peer in question will be called the next time. An entry in this table can only be created if the associated ifEntry already exists.
.1.3.6.1.2.1.10.21.1.2.1.1.1,DIAL-CONTROL-MIB::dialCtlPeerCfgId,INTEGER,not-accessible,,current,,This object identifies a single peer. There may be several entries in this table for one peer, defining different ways of reaching this peer. Thus, there may be several entries in this table with the same value of dialCtlPeerCfgId. Multiple entries for one peer may be used to support multilink as well as backup lines. A single peer will be identified by a unique value of this object. Several entries for one peer MUST have the same value of dialCtlPeerCfgId, but different ifEntries and thus different values of ifIndex.
.1.3.6.1.2.1.10.21.1.2.1.1.2,DIAL-CONTROL-MIB::dialCtlPeerCfgIfType,INTEGER,read-create,,current,other(1):regular1822(2):hdh1822(3):ddnX25(4):rfc877x25(5):ethernetCsmacd(6):iso88023Csmacd(7):iso88024TokenBus(8):iso88025TokenRing(9):iso88026Man(10):starLan(11):proteon10Mbit(12):proteon80Mbit(13):hyperchannel(14):fddi(15):lapb(16):sdlc(17):ds1(18):e1(19):basicISDN(20):primaryISDN(21):propPointToPointSerial(22):ppp(23):softwareLoopback(24):eon(25):ethernet3Mbit(26):nsip(27):slip(28):ultra(29):ds3(30):sip(31):frameRelay(32):rs232(33):para(34):arcnet(35):arcnetPlus(36):atm(37):miox25(38):sonet(39):x25ple(40):iso88022llc(41):localTalk(42):smdsDxi(43):frameRelayService(44):v35(45):hssi(46):hippi(47):modem(48):aal5(49):sonetPath(50):sonetVT(51):smdsIcip(52):propVirtual(53):propMultiplexor(54):ieee80212(55):fibreChannel(56):hippiInterface(57):frameRelayInterconnect(58):aflane8023(59):aflane8025(60):cctEmul(61):fastEther(62):isdn(63):v11(64):v36(65):g703at64k(66):g703at2mb(67):qllc(68):fastEtherFX(69):channel(70):ieee80211(71):ibm370parChan(72):escon(73):dlsw(74):isdns(75):isdnu(76):lapd(77):ipSwitch(78):rsrb(79):atmLogical(80):ds0(81):ds0Bundle(82):bsc(83):async(84):cnr(85):iso88025Dtr(86):eplrs(87):arap(88):propCnls(89):hostPad(90):termPad(91):frameRelayMPI(92):x213(93):adsl(94):radsl(95):sdsl(96):vdsl(97):iso88025CRFPInt(98):myrinet(99):voiceEM(100):voiceFXO(101):voiceFXS(102):voiceEncap(103):voiceOverIp(104):atmDxi(105):atmFuni(106):atmIma(107):pppMultilinkBundle(108):ipOverCdlc(109):ipOverClaw(110):stackToStack(111):virtualIpAddress(112):mpc(113):ipOverAtm(114):iso88025Fiber(115):tdlc(116):gigabitEthernet(117):hdlc(118):lapf(119):v37(120):x25mlp(121):x25huntGroup(122):transpHdlc(123):interleave(124):fast(125):ip(126):docsCableMaclayer(127):docsCableDownstream(128):docsCableUpstream(129):a12MppSwitch(130):tunnel(131):coffee(132):ces(133):atmSubInterface(134):l2vlan(135):l3ipvlan(136):l3ipxvlan(137):digitalPowerline(138):mediaMailOverIp(139):dtm(140):dcn(141):ipForward(142):msdsl(143):ieee1394(144):if-gsn(145):dvbRccMacLayer(146):dvbRccDownstream(147):dvbRccUpstream(148):atmVirtual(149):mplsTunnel(150):srp(151):voiceOverAtm(152):voiceOverFrameRelay(153):idsl(154):compositeLink(155):ss7SigLink(156):propWirelessP2P(157):frForward(158):rfc1483(159):usb(160):ieee8023adLag(161):bgppolicyaccounting(162):frf16MfrBundle(163):h323Gatekeeper(164):h323Proxy(165):mpls(166):mfSigLink(167):hdsl2(168):shdsl(169):ds1FDL(170):pos(171):dvbAsiIn(172):dvbAsiOut(173):plc(174):nfas(175):tr008(176):gr303RDT(177):gr303IDT(178):isup(179):propDocsWirelessMaclayer(180):propDocsWirelessDownstream(181):propDocsWirelessUpstream(182):hiperlan2(183):propBWAp2Mp(184):sonetOverheadChannel(185):digitalWrapperOverheadChannel(186):aal2(187):radioMAC(188):atmRadio(189):imt(190):mvl(191):reachDSL(192):frDlciEndPt(193):atmVciEndPt(194):opticalChannel(195):opticalTransport(196):propAtm(197):voiceOverCable(198):infiniband(199):teLink(200):q2931(201):virtualTg(202):sipTg(203):sipSig(204):docsCableUpstreamChannel(205):econet(206):pon155(207):pon622(208):bridge(209):linegroup(210):voiceEMFGD(211):voiceFGDEANA(212):voiceDID(213):mpegTransport(214):sixToFour(215):gtp(216):pdnEtherLoop1(217):pdnEtherLoop2(218):opticalChannelGroup(219):homepna(220):gfp(221):ciscoISLvlan(222):actelisMetaLOOP(223):fcipLink(224):rpr(225):qam(226):lmp(227):cblVectaStar(228):docsCableMCmtsDownstream(229):adsl2(230):macSecControlledIF(231):macSecUncontrolledIF(232):aviciOpticalEther(233):atmbond(234):voiceFGDOS(235):mocaVersion1(236):ieee80216WMAN(237):adsl2plus(238):dvbRcsMacLayer(239):dvbTdm(240):dvbRcsTdma(241):x86Laps(242):wwanPP(243):wwanPP2(244):voiceEBS(245):ifPwType(246):ilan(247):pip(248):aluELP(249):gpon(250):vdsl2(251):capwapDot11Profile(252):capwapDot11Bss(253):capwapWtpVirtualRadio(254):bits(255):docsCableUpstreamRfPort(256):cableDownstreamRfPort(257):vmwareVirtualNic(258):ieee802154(259):otnOdu(260):otnOtu(261):ifVfiType(262):g9981(263):g9982(264):g9983(265):aluEpon(266):aluEponOnu(267):aluEponPhysicalUni(268):aluEponLogicalLink(269):aluGponOnu(270):aluGponPhysicalUni(271):vmwareNicTeam(272):docsOfdmDownstream(277):docsOfdmaUpstream(278):gfast(279):sdci(280):xboxWireless(281):fastdsl(282):docsCableScte55d1FwdOob(283):docsCableScte55d1RetOob(284):docsCableScte55d2DsOob(285):docsCableScte55d2UsOob(286):docsCableNdf(287):docsCableNdr(288):ptm(289):ghn(290):otnOtsi(291):otnOtuc(292):otnOduc(293):otnOtsig(294):microwaveCarrierTermination(295):microwaveRadioLinkTerminal(296),The interface type to be used for calling this peer. In case of ISDN, the value of isdn(63) is to be used.
.1.3.6.1.2.1.10.21.1.2.1.1.3,DIAL-CONTROL-MIB::dialCtlPeerCfgLowerIf,Integer32,read-create,,current,,ifIndex value of an interface the peer will have to be called on. For example, on an ISDN interface, this can be the ifIndex value of a D channel or the ifIndex value of a B channel, whatever is appropriate for a given peer. As an example, for Basic Rate leased lines it will be necessary to specify a B channel ifIndex, while for semi-permanent connections the D channel ifIndex has to be specified. If the interface can be dynamically assigned, this object has a value of zero.
.1.3.6.1.2.1.10.21.1.2.1.1.4,DIAL-CONTROL-MIB::dialCtlPeerCfgOriginateAddress,OCTET,read-create,,current,,Call Address at which the peer will be called. Think of this as the set of characters following 'ATDT ' or the 'phone number' included in a D channel call request. The structure of this information will be switch type specific. If there is no address information required for reaching the peer, i.e., for leased lines, this object will be a zero length string.
.1.3.6.1.2.1.10.21.1.2.1.1.5,DIAL-CONTROL-MIB::dialCtlPeerCfgAnswerAddress,OCTET,read-create,,current,,Calling Party Number information element, as for example passed in an ISDN SETUP message by a PBX or switch, for incoming calls. This address can be used to identify the peer. If this address is either unknown or identical to dialCtlPeerCfgOriginateAddress, this object will be a zero length string.
.1.3.6.1.2.1.10.21.1.2.1.1.6,DIAL-CONTROL-MIB::dialCtlPeerCfgSubAddress,OCTET,read-create,,current,,Subaddress at which the peer will be called. If the subaddress is undefined for the given media or unused, this is a zero length string.
.1.3.6.1.2.1.10.21.1.2.1.1.7,DIAL-CONTROL-MIB::dialCtlPeerCfgClosedUserGroup,OCTET,read-create,,current,,Closed User Group at which the peer will be called. If the Closed User Group is undefined for the given media or unused, this is a zero length string.
.1.3.6.1.2.1.10.21.1.2.1.1.8,DIAL-CONTROL-MIB::dialCtlPeerCfgSpeed,INTEGER,read-create,,current,,The desired information transfer speed in bits/second when calling this peer. The detailed media specific information, e.g. information type and information transfer rate for ISDN circuits, has to be extracted from this object. If the transfer speed to be used is unknown or the default speed for this type of interfaces, the value of this object may be zero.
.1.3.6.1.2.1.10.21.1.2.1.1.9,DIAL-CONTROL-MIB::dialCtlPeerCfgInfoType,INTEGER,read-create,,current,other(1):speech(2):unrestrictedDigital(3):unrestrictedDigital56(4):restrictedDigital(5):audio31(6):audio7(7):video(8):packetSwitched(9):fax(10),The Information Transfer Capability to be used when calling this peer. speech(2) refers to a non-data connection, whereas audio31(6) and audio7(7) refer to data mode connections.
.1.3.6.1.2.1.10.21.1.2.1.1.10,DIAL-CONTROL-MIB::dialCtlPeerCfgPermission,INTEGER,read-create,,current,originate(1):answer(2):both(3):callback(4):none(5),Applicable permissions. callback(4) either rejects the call and then calls back, or uses the 'Reverse charging' information element if it is available. Note that callback(4) is supposed to control charging, not security, and applies to callback prior to accepting a call. Callback for security reasons can be handled using PPP callback.
.1.3.6.1.2.1.10.21.1.2.1.1.11,DIAL-CONTROL-MIB::dialCtlPeerCfgInactivityTimer,INTEGER,read-create,,current,,The connection will be automatically disconnected if no longer carrying useful data for a time period, in seconds, specified in this object. Useful data in this context refers to forwarding packets, including routing information; it excludes the encapsulator maintenance frames. A value of zero means the connection will not be automatically taken down due to inactivity, which implies that it is a dedicated circuit.
.1.3.6.1.2.1.10.21.1.2.1.1.12,DIAL-CONTROL-MIB::dialCtlPeerCfgMinDuration,INTEGER,read-create,,current,,Minimum duration of a call in seconds, starting from the time the call is connected until the call is disconnected. This is to accomplish the fact that in most countries charging applies to units of time, which should be matched as closely as possible.
.1.3.6.1.2.1.10.21.1.2.1.1.13,DIAL-CONTROL-MIB::dialCtlPeerCfgMaxDuration,INTEGER,read-create,,current,,Maximum call duration in seconds. Zero means 'unlimited'.
.1.3.6.1.2.1.10.21.1.2.1.1.14,DIAL-CONTROL-MIB::dialCtlPeerCfgCarrierDelay,INTEGER,read-create,,current,,The call timeout time in seconds. The default value of zero means that the call timeout as specified for the media in question will apply.
.1.3.6.1.2.1.10.21.1.2.1.1.15,DIAL-CONTROL-MIB::dialCtlPeerCfgCallRetries,INTEGER,read-create,,current,,The number of calls to a non-responding address that may be made. A retry count of zero means there is no bound. The intent is to bound the number of successive calls to an address which is inaccessible, or which refuses those calls. Some countries regulate the number of call retries to a given peer that can be made.
.1.3.6.1.2.1.10.21.1.2.1.1.16,DIAL-CONTROL-MIB::dialCtlPeerCfgRetryDelay,INTEGER,read-create,,current,,The time in seconds between call retries if a peer cannot be reached. A value of zero means that call retries may be done without any delay.
.1.3.6.1.2.1.10.21.1.2.1.1.17,DIAL-CONTROL-MIB::dialCtlPeerCfgFailureDelay,INTEGER,read-create,,current,,The time in seconds after which call attempts are to be placed again after a peer has been noticed to be unreachable, i.e. after dialCtlPeerCfgCallRetries unsuccessful call attempts. A value of zero means that a peer will not be called again after dialCtlPeerCfgCallRetries unsuccessful call attempts.
.1.3.6.1.2.1.10.21.1.2.1.1.18,DIAL-CONTROL-MIB::dialCtlPeerCfgTrapEnable,INTEGER,read-create,,current,enabled(1):disabled(2),This object indicates whether dialCtlPeerCallInformation and dialCtlPeerCallSetup traps should be generated for this peer.
.1.3.6.1.2.1.10.21.1.2.1.1.19,DIAL-CONTROL-MIB::dialCtlPeerCfgStatus,INTEGER,read-create,,current,active(1):notInService(2):notReady(3):createAndGo(4):createAndWait(5):destroy(6),Status of one row in this table.
.1.3.6.1.2.1.10.21.1.2.2,DIAL-CONTROL-MIB::dialCtlPeerStatsTable,,not-accessible,,current,,Statistics information for each peer entry. There will be one entry in this table for each entry in the dialCtlPeerCfgTable.
.1.3.6.1.2.1.10.21.1.2.2.1,DIAL-CONTROL-MIB::dialCtlPeerStatsEntry,,not-accessible,,current,,Statistics information for a single Peer. This entry is effectively permanent, and contains information describing the last call attempt as well as supplying statistical information.
.1.3.6.1.2.1.10.21.1.2.2.1.1,DIAL-CONTROL-MIB::dialCtlPeerStatsConnectTime,Unsigned32,read-only,,current,,Accumulated connect time to the peer since system startup. This is the total connect time, i.e. the connect time for outgoing calls plus the time for incoming calls.
.1.3.6.1.2.1.10.21.1.2.2.1.2,DIAL-CONTROL-MIB::dialCtlPeerStatsChargedUnits,Unsigned32,read-only,,current,,The total number of charging units applying to this peer since system startup. Only the charging units applying to the local interface, i.e. for originated calls or for calls with 'Reverse charging' being active, will be counted here.
.1.3.6.1.2.1.10.21.1.2.2.1.3,DIAL-CONTROL-MIB::dialCtlPeerStatsSuccessCalls,Unsigned32,read-only,,current,,Number of completed calls to this peer.
.1.3.6.1.2.1.10.21.1.2.2.1.4,DIAL-CONTROL-MIB::dialCtlPeerStatsFailCalls,Unsigned32,read-only,,current,,Number of failed call attempts to this peer since system startup.
.1.3.6.1.2.1.10.21.1.2.2.1.5,DIAL-CONTROL-MIB::dialCtlPeerStatsAcceptCalls,Unsigned32,read-only,,current,,Number of calls from this peer accepted since system startup.
.1.3.6.1.2.1.10.21.1.2.2.1.6,DIAL-CONTROL-MIB::dialCtlPeerStatsRefuseCalls,Unsigned32,read-only,,current,,Number of calls from this peer refused since system startup.
.1.3.6.1.2.1.10.21.1.2.2.1.7,DIAL-CONTROL-MIB::dialCtlPeerStatsLastDisconnectCause,OCTET,read-only,,current,,The encoded network cause value associated with the last call. This object will be updated whenever a call is started or cleared. The value of this object will depend on the interface type as well as on the protocol and protocol version being used on this interface. Some references for possible cause values are given below.
.1.3.6.1.2.1.10.21.1.2.2.1.8,DIAL-CONTROL-MIB::dialCtlPeerStatsLastDisconnectText,OCTET,read-only,,current,,ASCII text describing the reason for the last call termination. This object exists because it would be impossible for a management station to store all possible cause values for all types of interfaces. It should be used only if a management station is unable to decode the value of dialCtlPeerStatsLastDisconnectCause. This object will be updated whenever a call is started or cleared.
.1.3.6.1.2.1.10.21.1.2.2.1.9,DIAL-CONTROL-MIB::dialCtlPeerStatsLastSetupTime,TimeTicks,read-only,,current,,The value of sysUpTime when the last call to this peer was started. For ISDN media, this will be the time when the setup message was received from or sent to the network. This object will be updated whenever a call is started or cleared.
.1.3.6.1.2.1.10.21.1.3,DIAL-CONTROL-MIB::callActive,,,,,,
.1.3.6.1.2.1.10.21.1.3.1,DIAL-CONTROL-MIB::callActiveTable,,not-accessible,,current,,A table containing information about active calls to a specific destination.
.1.3.6.1.2.1.10.21.1.3.1.1,DIAL-CONTROL-MIB::callActiveEntry,,not-accessible,callActiveSetupTime:callActiveIndex,current,,The information regarding a single active Connection. An entry in this table will be created when a call is started. An entry in this table will be deleted when an active call clears.
.1.3.6.1.2.1.10.21.1.3.1.1.1,DIAL-CONTROL-MIB::callActiveSetupTime,TimeTicks,not-accessible,,current,,The value of sysUpTime when the call associated to this entry was started. This will be useful for an NMS to retrieve all calls after a specific time. Also, this object can be useful in finding large delays between the time the call was started and the time the call was connected. For ISDN media, this will be the time when the setup message was received from or sent to the network.
.1.3.6.1.2.1.10.21.1.3.1.1.2,DIAL-CONTROL-MIB::callActiveIndex,INTEGER,not-accessible,,current,,Small index variable to distinguish calls that start in the same hundredth of a second.
.1.3.6.1.2.1.10.21.1.3.1.1.3,DIAL-CONTROL-MIB::callActivePeerAddress,OCTET,read-only,,current,,The number this call is connected to. If the number is not available, then it will have a length of zero.
.1.3.6.1.2.1.10.21.1.3.1.1.4,DIAL-CONTROL-MIB::callActivePeerSubAddress,OCTET,read-only,,current,,The subaddress this call is connected to. If the subaddress is undefined or not available, this will be a zero length string.
.1.3.6.1.2.1.10.21.1.3.1.1.5,DIAL-CONTROL-MIB::callActivePeerId,INTEGER,read-only,,current,,This is the Id value of the peer table entry to which this call was made. If a peer table entry for this call does not exist or is unknown, the value of this object will be zero.
.1.3.6.1.2.1.10.21.1.3.1.1.6,DIAL-CONTROL-MIB::callActivePeerIfIndex,INTEGER,read-only,,current,,This is the ifIndex value of the peer table entry to which this call was made. If a peer table entry for this call does not exist or is unknown, the value of this object will be zero.
.1.3.6.1.2.1.10.21.1.3.1.1.7,DIAL-CONTROL-MIB::callActiveLogicalIfIndex,Integer32,read-only,,current,,This is the ifIndex value of the logical interface through which this call was made. For ISDN media, this would be the ifIndex of the B channel which was used for this call. If the ifIndex value is unknown, the value of this object will be zero.
.1.3.6.1.2.1.10.21.1.3.1.1.8,DIAL-CONTROL-MIB::callActiveConnectTime,TimeTicks,read-only,,current,,The value of sysUpTime when the call was connected. If the call is not connected, this object will have a value of zero.
.1.3.6.1.2.1.10.21.1.3.1.1.9,DIAL-CONTROL-MIB::callActiveCallState,INTEGER,read-only,,current,unknown(1):connecting(2):connected(3):active(4),The current call state. unknown(1) - The call state is unknown. connecting(2) - A connection attempt (outgoing call) is being made. connected(3) - An incoming call is in the process of validation. active(4) - The call is active. 
.1.3.6.1.2.1.10.21.1.3.1.1.10,DIAL-CONTROL-MIB::callActiveCallOrigin,INTEGER,read-only,,current,originate(1):answer(2):callback(3),The call origin.
.1.3.6.1.2.1.10.21.1.3.1.1.11,DIAL-CONTROL-MIB::callActiveChargedUnits,Unsigned32,read-only,,current,,The number of charged units for this connection. For incoming calls or if charging information is not supplied by the switch, the value of this object will be zero.
.1.3.6.1.2.1.10.21.1.3.1.1.12,DIAL-CONTROL-MIB::callActiveInfoType,INTEGER,read-only,,current,other(1):speech(2):unrestrictedDigital(3):unrestrictedDigital56(4):restrictedDigital(5):audio31(6):audio7(7):video(8):packetSwitched(9):fax(10),The information type for this call.
.1.3.6.1.2.1.10.21.1.3.1.1.13,DIAL-CONTROL-MIB::callActiveTransmitPackets,Unsigned32,read-only,,current,,The number of packets which were transmitted for this call.
.1.3.6.1.2.1.10.21.1.3.1.1.14,DIAL-CONTROL-MIB::callActiveTransmitBytes,Unsigned32,read-only,,current,,The number of bytes which were transmitted for this call.
.1.3.6.1.2.1.10.21.1.3.1.1.15,DIAL-CONTROL-MIB::callActiveReceivePackets,Unsigned32,read-only,,current,,The number of packets which were received for this call.
.1.3.6.1.2.1.10.21.1.3.1.1.16,DIAL-CONTROL-MIB::callActiveReceiveBytes,Unsigned32,read-only,,current,,The number of bytes which were received for this call.
.1.3.6.1.2.1.10.21.1.4,DIAL-CONTROL-MIB::callHistory,,,,,,
.1.3.6.1.2.1.10.21.1.4.1,DIAL-CONTROL-MIB::callHistoryTableMaxLength,INTEGER,read-write,,current,,The upper limit on the number of entries that the callHistoryTable may contain. A value of 0 will prevent any history from being retained. When this table is full, the oldest entry will be deleted and the new one will be created.
.1.3.6.1.2.1.10.21.1.4.2,DIAL-CONTROL-MIB::callHistoryRetainTimer,INTEGER,read-write,,current,,The minimum amount of time that an callHistoryEntry will be maintained before being deleted. A value of 0 will prevent any history from being retained in the callHistoryTable, but will neither prevent callCompletion traps being generated nor affect other tables.
.1.3.6.1.2.1.10.21.1.4.3,DIAL-CONTROL-MIB::callHistoryTable,,not-accessible,,current,,A table containing information about specific calls to a specific destination.
.1.3.6.1.2.1.10.21.1.4.3.1,DIAL-CONTROL-MIB::callHistoryEntry,,not-accessible,callActiveSetupTime:callActiveIndex,current,,The information regarding a single Connection.
.1.3.6.1.2.1.10.21.1.4.3.1.1,DIAL-CONTROL-MIB::callHistoryPeerAddress,OCTET,read-only,,current,,The number this call was connected to. If the number is not available, then it will have a length of zero.
.1.3.6.1.2.1.10.21.1.4.3.1.2,DIAL-CONTROL-MIB::callHistoryPeerSubAddress,OCTET,read-only,,current,,The subaddress this call was connected to. If the subaddress is undefined or not available, this will be a zero length string.
.1.3.6.1.2.1.10.21.1.4.3.1.3,DIAL-CONTROL-MIB::callHistoryPeerId,INTEGER,read-only,,current,,This is the Id value of the peer table entry to which this call was made. If a peer table entry for this call does not exist, the value of this object will be zero.
.1.3.6.1.2.1.10.21.1.4.3.1.4,DIAL-CONTROL-MIB::callHistoryPeerIfIndex,INTEGER,read-only,,current,,This is the ifIndex value of the peer table entry to which this call was made. If a peer table entry for this call does not exist, the value of this object will be zero.
.1.3.6.1.2.1.10.21.1.4.3.1.5,DIAL-CONTROL-MIB::callHistoryLogicalIfIndex,Integer32,read-only,,current,,This is the ifIndex value of the logical interface through which this call was made. For ISDN media, this would be the ifIndex of the B channel which was used for this call.
.1.3.6.1.2.1.10.21.1.4.3.1.6,DIAL-CONTROL-MIB::callHistoryDisconnectCause,OCTET,read-only,,current,,The encoded network cause value associated with this call. The value of this object will depend on the interface type as well as on the protocol and protocol version being used on this interface. Some references for possible cause values are given below.
.1.3.6.1.2.1.10.21.1.4.3.1.7,DIAL-CONTROL-MIB::callHistoryDisconnectText,OCTET,read-only,,current,,ASCII text describing the reason for call termination. This object exists because it would be impossible for a management station to store all possible cause values for all types of interfaces. It should be used only if a management station is unable to decode the value of dialCtlPeerStatsLastDisconnectCause.
.1.3.6.1.2.1.10.21.1.4.3.1.8,DIAL-CONTROL-MIB::callHistoryConnectTime,TimeTicks,read-only,,current,,The value of sysUpTime when the call was connected.
.1.3.6.1.2.1.10.21.1.4.3.1.9,DIAL-CONTROL-MIB::callHistoryDisconnectTime,TimeTicks,read-only,,current,,The value of sysUpTime when the call was disconnected.
.1.3.6.1.2.1.10.21.1.4.3.1.10,DIAL-CONTROL-MIB::callHistoryCallOrigin,INTEGER,read-only,,current,originate(1):answer(2):callback(3),The call origin.
.1.3.6.1.2.1.10.21.1.4.3.1.11,DIAL-CONTROL-MIB::callHistoryChargedUnits,Unsigned32,read-only,,current,,The number of charged units for this connection. For incoming calls or if charging information is not supplied by the switch, the value of this object will be zero.
.1.3.6.1.2.1.10.21.1.4.3.1.12,DIAL-CONTROL-MIB::callHistoryInfoType,INTEGER,read-only,,current,other(1):speech(2):unrestrictedDigital(3):unrestrictedDigital56(4):restrictedDigital(5):audio31(6):audio7(7):video(8):packetSwitched(9):fax(10),The information type for this call.
.1.3.6.1.2.1.10.21.1.4.3.1.13,DIAL-CONTROL-MIB::callHistoryTransmitPackets,Unsigned32,read-only,,current,,The number of packets which were transmitted while this call was active.
.1.3.6.1.2.1.10.21.1.4.3.1.14,DIAL-CONTROL-MIB::callHistoryTransmitBytes,Unsigned32,read-only,,current,,The number of bytes which were transmitted while this call was active.
.1.3.6.1.2.1.10.21.1.4.3.1.15,DIAL-CONTROL-MIB::callHistoryReceivePackets,Unsigned32,read-only,,current,,The number of packets which were received while this call was active.
.1.3.6.1.2.1.10.21.1.4.3.1.16,DIAL-CONTROL-MIB::callHistoryReceiveBytes,Unsigned32,read-only,,current,,The number of bytes which were received while this call was active.
.1.3.6.1.2.1.10.21.2,DIAL-CONTROL-MIB::dialControlMibTrapPrefix,,,,,,
.1.3.6.1.2.1.10.21.2.0,DIAL-CONTROL-MIB::dialControlMibTraps,,,,,,
.1.3.6.1.2.1.10.21.2.0.1,DIAL-CONTROL-MIB::dialCtlPeerCallInformation,,,,,,This trap/inform is sent to the manager whenever a successful call clears, or a failed call attempt is determined to have ultimately failed. In the event that call retry is active, then this is after all retry attempts have failed. However, only one such trap is sent in between successful call attempts; subsequent call attempts result in no trap. ifOperStatus will return the operational status of the virtual interface associated with the peer to whom this call was made to.
.1.3.6.1.2.1.10.21.2.0.2,DIAL-CONTROL-MIB::dialCtlPeerCallSetup,,,,,,This trap/inform is sent to the manager whenever a call setup message is received or sent. ifOperStatus will return the operational status of the virtual interface associated with the peer to whom this call was made to.
.1.3.6.1.2.1.10.21.3,DIAL-CONTROL-MIB::dialControlMibConformance,,,,,,
.1.3.6.1.2.1.10.21.3.1,DIAL-CONTROL-MIB::dialControlMibCompliances,,,,,,
.1.3.6.1.2.1.10.21.3.1.1,DIAL-CONTROL-MIB::dialControlMibCompliance,,,,,,The compliance statement for entities which implement the DIAL CONTROL MIB
.1.3.6.1.2.1.10.21.3.2,DIAL-CONTROL-MIB::dialControlMibGroups,,,,,,
.1.3.6.1.2.1.10.21.3.2.1,DIAL-CONTROL-MIB::dialControlGroup,,,,,,A collection of objects providing the DIAL CONTROL capability.
.1.3.6.1.2.1.10.21.3.2.2,DIAL-CONTROL-MIB::callActiveGroup,,,,,,A collection of objects providing the active call capability.
.1.3.6.1.2.1.10.21.3.2.3,DIAL-CONTROL-MIB::callHistoryGroup,,,,,,A collection of objects providing the Call History capability.
.1.3.6.1.2.1.10.21.3.2.4,DIAL-CONTROL-MIB::callNotificationsGroup,,,,,,The notifications which a Dial Control MIB entity is required to implement.
.1.3.6.1.2.1.10.56,FC-MGMT-MIB::fcMgmtMIB,,,,,,This module defines management information specific to Fibre Channel-attached devices. Copyright (C) The Internet Society (2005). This version of this MIB module is part of RFC 4044; see the RFC itself for full legal notices.
.1.3.6.1.2.1.10.56.1,FC-MGMT-MIB::fcmgmtObjects,,,,,,
.1.3.6.1.2.1.10.56.1.1,FC-MGMT-MIB::fcmInstanceTable,,not-accessible,,current,,Information about the local Fibre Channel management instances.
.1.3.6.1.2.1.10.56.1.1.1,FC-MGMT-MIB::fcmInstanceEntry,,not-accessible,fcmInstanceIndex,current,,A list of attributes for a particular local Fibre Channel management instance.
.1.3.6.1.2.1.10.56.1.1.1.1,FC-MGMT-MIB::fcmInstanceIndex,Unsigned32,not-accessible,,current,,An arbitrary integer value that uniquely identifies this instance amongst all local Fibre Channel management instances. It is mandatory to keep this value constant between restarts of the agent, and to make every possible effort to keep it constant across restarts (but note, it is unrealistic to expect it to remain constant across all re-configurations of the local system, e.g., across the replacement of all non- volatile storage).
.1.3.6.1.2.1.10.56.1.1.1.2,FC-MGMT-MIB::fcmInstanceWwn,OCTET,read-only,,current,,If the instance has one (or more) WWN(s), then this object contains that (or one of those) WWN(s). If the instance does not have a WWN associated with it, then this object contains the zero-length string.
.1.3.6.1.2.1.10.56.1.1.1.3,FC-MGMT-MIB::fcmInstanceFunctions,BITS,read-only,,current,other(0):hub(1):switch(2):bridge(3):gateway(4):host(5):storageSubsys(6):storageAccessDev(7):nas(8):wdmux(9):storageDevice(10),One (or more) Fibre Channel unit functions being performed by this instance.
.1.3.6.1.2.1.10.56.1.1.1.4,FC-MGMT-MIB::fcmInstancePhysicalIndex,Integer32,read-only,,current,,If this management instance corresponds to a physical component (or to a hierarchy of physical components) identified by the Entity-MIB, then this object's value is the value of the entPhysicalIndex of that component (or of the component at the root of that hierarchy). If there is no correspondence to a physical component (or no component that has an entPhysicalIndex value), then the value of this object is zero.
.1.3.6.1.2.1.10.56.1.1.1.5,FC-MGMT-MIB::fcmInstanceSoftwareIndex,Integer32,read-only,,current,,If this management instance corresponds to an installed software module identified in the Host Resources MIB, then this object's value is the value of the hrSWInstalledIndex of that module. If there is no correspondence to an installed software module (or no module that has a hrSWInstalledIndex value), then the value of this object is zero.
.1.3.6.1.2.1.10.56.1.1.1.6,FC-MGMT-MIB::fcmInstanceStatus,INTEGER,read-only,,current,unknown(1):ok(2):warning(3):failed(4),Overall status of the Fibre Channel entity/entities managed by this management instance. The value should reflect the most serious status of such entities.
.1.3.6.1.2.1.10.56.1.1.1.7,FC-MGMT-MIB::fcmInstanceTextName,OCTET,read-write,,current,,A textual name for this management instance and the Fibre Channel entity/entities that it is managing.
.1.3.6.1.2.1.10.56.1.1.1.8,FC-MGMT-MIB::fcmInstanceDescr,OCTET,read-write,,current,,A textual description of this management instance and the Fibre Channel entity/entities that it is managing.
.1.3.6.1.2.1.10.56.1.1.1.9,FC-MGMT-MIB::fcmInstanceFabricId,OCTET,read-only,,current,,The globally unique Fabric Identifier that identifies the fabric to which the Fibre Channel entity/entities managed by this management instance are connected, or, of which they are a part. This is typically the Node WWN of the principal switch of a Fibre Channel fabric. The zero-length string indicates that the fabric identifier is unknown (or not applicable). In the event that the Fibre Channel entity/entities managed by this management instance is/are connected to multiple fabrics, then this object records the first (known) one.
.1.3.6.1.2.1.10.56.1.2,FC-MGMT-MIB::fcmSwitchTable,,not-accessible,,current,,A table of information about Fibre Channel switches that are managed by Fibre Channel management instances. Each Fibre Channel management instance can manage one or more Fibre Channel switches.
.1.3.6.1.2.1.10.56.1.2.1,FC-MGMT-MIB::fcmSwitchEntry,,not-accessible,fcmInstanceIndex:fcmSwitchIndex,current,,Information about a particular Fibre Channel switch that is managed by the management instance given by fcmInstanceIndex.
.1.3.6.1.2.1.10.56.1.2.1.1,FC-MGMT-MIB::fcmSwitchIndex,Unsigned32,not-accessible,,current,,An arbitrary integer that uniquely identifies a Fibre Channel switch amongst those managed by one Fibre Channel management instance. It is mandatory to keep this value constant between restarts of the agent, and to make every possible effort to keep it constant across restarts.
.1.3.6.1.2.1.10.56.1.2.1.2,FC-MGMT-MIB::fcmSwitchDomainId,Integer32,read-write,,current,,The Domain Id of this switch. A value of zero indicates that a switch has not (yet) been assigned a Domain Id.
.1.3.6.1.2.1.10.56.1.2.1.3,FC-MGMT-MIB::fcmSwitchPrincipal,INTEGER,read-only,,current,true(1):false(2),An indication of whether this switch is the principal switch within its fabric.
.1.3.6.1.2.1.10.56.1.2.1.4,FC-MGMT-MIB::fcmSwitchWWN,OCTET,read-only,,current,,The World Wide Name of this switch.
.1.3.6.1.2.1.10.56.1.3,FC-MGMT-MIB::fcmPortTable,,not-accessible,,current,,Information about Fibre Channel ports. Each Fibre Channel port is represented by one entry in the IF-MIB's ifTable.
.1.3.6.1.2.1.10.56.1.3.1,FC-MGMT-MIB::fcmPortEntry,,not-accessible,ifIndex,current,,Each entry contains information about a specific port.
.1.3.6.1.2.1.10.56.1.3.1.1,FC-MGMT-MIB::fcmPortInstanceIndex,Unsigned32,read-only,,current,,The value of fcmInstanceIndex by which the Fibre Channel management instance, which manages this port, is identified in the fcmInstanceTable.
.1.3.6.1.2.1.10.56.1.3.1.2,FC-MGMT-MIB::fcmPortWwn,OCTET,read-only,,current,,The World Wide Name of the port, or the zero-length string if the port does not have a WWN.
.1.3.6.1.2.1.10.56.1.3.1.3,FC-MGMT-MIB::fcmPortNodeWwn,OCTET,read-only,,current,,The World Wide Name of the Node that contains this port, or the zero-length string if the port does not have a node WWN.
.1.3.6.1.2.1.10.56.1.3.1.4,FC-MGMT-MIB::fcmPortAdminType,Unsigned32,read-write,,current,,The administratively desired type of this port.
.1.3.6.1.2.1.10.56.1.3.1.5,FC-MGMT-MIB::fcmPortOperType,Unsigned32,read-only,,current,,The current operational type of this port.
.1.3.6.1.2.1.10.56.1.3.1.6,FC-MGMT-MIB::fcmPortFcCapClass,BITS,read-only,,current,classF(0):class1(1):class2(2):class3(3):class4(4):class5(5):class6(6),The classes of service capability of this port.
.1.3.6.1.2.1.10.56.1.3.1.7,FC-MGMT-MIB::fcmPortFcOperClass,BITS,read-only,,current,classF(0):class1(1):class2(2):class3(3):class4(4):class5(5):class6(6),The classes of service that are currently operational on this port. For an FL_Port, this is the union of the classes being supported across all attached NL_Ports.
.1.3.6.1.2.1.10.56.1.3.1.8,FC-MGMT-MIB::fcmPortTransmitterType,INTEGER,read-only,,current,unknown(1):other(2):shortwave850nm(3):longwave1550nm(4):longwave1310nm(5):electrical(6),The technology of the port transceiver.
.1.3.6.1.2.1.10.56.1.3.1.9,FC-MGMT-MIB::fcmPortConnectorType,INTEGER,read-only,,current,unknown(1):other(2):gbic(3):embedded(4):glm(5):gbicSerialId(6):gbicNoSerialId(7):sfpSerialId(8):sfpNoSerialId(9),The module type of the port connector. This object refers to the hardware implementation of the port. It will be 'embedded' if the hardware equivalent to Gigabit interface card (GBIC) is part of the line card and is unremovable. It will be 'glm' if it's a gigabit link module (GLM). It will be 'gbicSerialId' if the GBIC serial id can be read, else it will be 'gbicNoSerialId'. It will be 'sfpSerialId' if the small form factor (SFP) pluggable GBICs serial id can be read, else it will be 'sfpNoSerialId'.
.1.3.6.1.2.1.10.56.1.3.1.10,FC-MGMT-MIB::fcmPortSerialNumber,OCTET,read-only,,current,,The serial number associated with the port (e.g., for a GBIC). If not applicable, the object's value is a zero- length string.
.1.3.6.1.2.1.10.56.1.3.1.11,FC-MGMT-MIB::fcmPortPhysicalNumber,Unsigned32,read-only,,current,,This is the port's 'Physical Port Number' as defined by GS-3.
.1.3.6.1.2.1.10.56.1.3.1.12,FC-MGMT-MIB::fcmPortAdminSpeed,INTEGER,read-write,,current,auto(1):eighthGbs(2):quarterGbs(3):halfGbs(4):oneGbs(5):twoGbs(6):fourGbs(7):tenGbs(8),The speed of the interface: 'auto' - auto-negotiation 'tenGbs' - 10Gbs 'fourGbs' - 4Gbs 'twoGbs' - 2Gbs 'oneGbs' - 1Gbs 'halfGbs' - 500Mbs 'quarterGbs' - 250Mbs 'eighthGbs' - 125Mbs
.1.3.6.1.2.1.10.56.1.3.1.13,FC-MGMT-MIB::fcmPortCapProtocols,BITS,read-only,,current,unknown(0):loop(1):fabric(2):scsi(3):tcpIp(4):vi(5):ficon(6),A bit mask specifying the higher level protocols that are capable of running over this port. Note that for generic Fx_Ports, E_Ports, and B_Ports, this object will indicate all protocols.
.1.3.6.1.2.1.10.56.1.3.1.14,FC-MGMT-MIB::fcmPortOperProtocols,BITS,read-only,,current,unknown(0):loop(1):fabric(2):scsi(3):tcpIp(4):vi(5):ficon(6),A bit mask specifying the higher level protocols that are currently operational on this port. For Fx_Ports, E_Ports, and B_Ports, this object will typically have the value 'unknown'.
.1.3.6.1.2.1.10.56.1.4,FC-MGMT-MIB::fcmPortStatsTable,,not-accessible,,current,,A list of statistics for Fibre Channel ports.
.1.3.6.1.2.1.10.56.1.4.1,FC-MGMT-MIB::fcmPortStatsEntry,,not-accessible,,current,,An entry containing statistics for a Fibre Channel port. If any counter in this table suffers a discontinuity, the value of ifCounterDiscontinuityTime (defined in the IF-MIB) must be updated.
.1.3.6.1.2.1.10.56.1.4.1.1,FC-MGMT-MIB::fcmPortBBCreditZeros,Counter64,read-only,,current,,The number of transitions in/out of the buffer-to-buffer credit zero state. The other side is not providing any credit.
.1.3.6.1.2.1.10.56.1.4.1.2,FC-MGMT-MIB::fcmPortFullInputBuffers,Counter64,read-only,,current,,The number of occurrences when all input buffers of a port were full and outbound buffer-to-buffer credit transitioned to zero, i.e., there became no credit to provide to other side.
.1.3.6.1.2.1.10.56.1.4.1.3,FC-MGMT-MIB::fcmPortClass2RxFrames,Counter64,read-only,,current,,The number of Class 2 frames received at this port.
.1.3.6.1.2.1.10.56.1.4.1.4,FC-MGMT-MIB::fcmPortClass2RxOctets,Counter64,read-only,,current,,The number of octets contained in Class 2 frames received at this port.
.1.3.6.1.2.1.10.56.1.4.1.5,FC-MGMT-MIB::fcmPortClass2TxFrames,Counter64,read-only,,current,,The number of Class 2 frames transmitted out of this port.
.1.3.6.1.2.1.10.56.1.4.1.6,FC-MGMT-MIB::fcmPortClass2TxOctets,Counter64,read-only,,current,,The number of octets contained in Class 2 frames transmitted out of this port.
.1.3.6.1.2.1.10.56.1.4.1.7,FC-MGMT-MIB::fcmPortClass2Discards,Counter64,read-only,,current,,The number of Class 2 frames that were discarded upon reception at this port.
.1.3.6.1.2.1.10.56.1.4.1.8,FC-MGMT-MIB::fcmPortClass2RxFbsyFrames,Counter64,read-only,,current,,The number of times that F_BSY was returned to this port as a result of a Class 2 frame that could not be delivered to the other end of the link. This can occur when either the fabric or the destination port is temporarily busy. Note that this counter will never increment for an F_Port.
.1.3.6.1.2.1.10.56.1.4.1.9,FC-MGMT-MIB::fcmPortClass2RxPbsyFrames,Counter64,read-only,,current,,The number of times that P_BSY was returned to this port as a result of a Class 2 frame that could not be delivered to the other end of the link. This can occur when the destination port is temporarily busy.
.1.3.6.1.2.1.10.56.1.4.1.10,FC-MGMT-MIB::fcmPortClass2RxFrjtFrames,Counter64,read-only,,current,,The number of times that F_RJT was returned to this port as a result of a Class 2 frame that was rejected by the fabric. Note that this counter will never increment for an F_Port.
.1.3.6.1.2.1.10.56.1.4.1.11,FC-MGMT-MIB::fcmPortClass2RxPrjtFrames,Counter64,read-only,,current,,The number of times that P_RJT was returned to this port as a result of a Class 2 frame that was rejected at the destination N_Port.
.1.3.6.1.2.1.10.56.1.4.1.12,FC-MGMT-MIB::fcmPortClass2TxFbsyFrames,Counter64,read-only,,current,,The number of times that F_BSY was generated by this port as a result of a Class 2 frame that could not be delivered because either the Fabric or the destination port was temporarily busy. Note that this counter will never increment for an N_Port.
.1.3.6.1.2.1.10.56.1.4.1.13,FC-MGMT-MIB::fcmPortClass2TxPbsyFrames,Counter64,read-only,,current,,The number of times that P_BSY was generated by this port as a result of a Class 2 frame that could not be delivered because the destination port was temporarily busy. Note that this counter will never increment for an F_Port.
.1.3.6.1.2.1.10.56.1.4.1.14,FC-MGMT-MIB::fcmPortClass2TxFrjtFrames,Counter64,read-only,,current,,The number of times that F_RJT was generated by this port as a result of a Class 2 frame being rejected by the fabric. Note that this counter will never increment for an N_Port.
.1.3.6.1.2.1.10.56.1.4.1.15,FC-MGMT-MIB::fcmPortClass2TxPrjtFrames,Counter64,read-only,,current,,The number of times that P_RJT was generated by this port as a result of a Class 2 frame being rejected at the destination N_Port. Note that this counter will never increment for an F_Port.
.1.3.6.1.2.1.10.56.1.4.1.16,FC-MGMT-MIB::fcmPortClass3RxFrames,Counter64,read-only,,current,,The number of Class 3 frames received at this port.
.1.3.6.1.2.1.10.56.1.4.1.17,FC-MGMT-MIB::fcmPortClass3RxOctets,Counter64,read-only,,current,,The number of octets contained in Class 3 frames received at this port.
.1.3.6.1.2.1.10.56.1.4.1.18,FC-MGMT-MIB::fcmPortClass3TxFrames,Counter64,read-only,,current,,The number of Class 3 frames transmitted out of this port.
.1.3.6.1.2.1.10.56.1.4.1.19,FC-MGMT-MIB::fcmPortClass3TxOctets,Counter64,read-only,,current,,The number of octets contained in Class 3 frames transmitted out of this port.
.1.3.6.1.2.1.10.56.1.4.1.20,FC-MGMT-MIB::fcmPortClass3Discards,Counter64,read-only,,current,,The number of Class 3 frames that were discarded upon reception at this port.
.1.3.6.1.2.1.10.56.1.4.1.21,FC-MGMT-MIB::fcmPortClassFRxFrames,Counter32,read-only,,current,,The number of Class F frames received at this port.
.1.3.6.1.2.1.10.56.1.4.1.22,FC-MGMT-MIB::fcmPortClassFRxOctets,Counter32,read-only,,current,,The number of octets contained in Class F frames received at this port.
.1.3.6.1.2.1.10.56.1.4.1.23,FC-MGMT-MIB::fcmPortClassFTxFrames,Counter32,read-only,,current,,The number of Class F frames transmitted out of this port.
.1.3.6.1.2.1.10.56.1.4.1.24,FC-MGMT-MIB::fcmPortClassFTxOctets,Counter32,read-only,,current,,The number of octets contained in Class F frames transmitted out of this port.
.1.3.6.1.2.1.10.56.1.4.1.25,FC-MGMT-MIB::fcmPortClassFDiscards,Counter32,read-only,,current,,The number of Class F frames that were discarded upon reception at this port.
.1.3.6.1.2.1.10.56.1.5,FC-MGMT-MIB::fcmPortLcStatsTable,,not-accessible,,current,,A list of Counter32-based statistics for systems that do not support Counter64.
.1.3.6.1.2.1.10.56.1.5.1,FC-MGMT-MIB::fcmPortLcStatsEntry,,not-accessible,,current,,An entry containing low-capacity (i.e., based on Counter32) statistics for a Fibre Channel port. If any counter in this table suffers a discontinuity, the value of ifCounterDiscontinuityTime (defined in the IF-MIB) must be updated.
.1.3.6.1.2.1.10.56.1.5.1.1,FC-MGMT-MIB::fcmPortLcBBCreditZeros,Counter32,read-only,,current,,The number of transitions in/out of the buffer-to-buffer credit zero state. The other side is not providing any credit.
.1.3.6.1.2.1.10.56.1.5.1.2,FC-MGMT-MIB::fcmPortLcFullInputBuffers,Counter32,read-only,,current,,The number of occurrences when all input buffers of a port were full and outbound buffer-to-buffer credit transitioned to zero, i.e., there became no credit to provide to other side.
.1.3.6.1.2.1.10.56.1.5.1.3,FC-MGMT-MIB::fcmPortLcClass2RxFrames,Counter32,read-only,,current,,The number of Class 2 frames received at this port.
.1.3.6.1.2.1.10.56.1.5.1.4,FC-MGMT-MIB::fcmPortLcClass2RxOctets,Counter32,read-only,,current,,The number of octets contained in Class 2 frames received at this port.
.1.3.6.1.2.1.10.56.1.5.1.5,FC-MGMT-MIB::fcmPortLcClass2TxFrames,Counter32,read-only,,current,,The number of Class 2 frames transmitted out of this port.
.1.3.6.1.2.1.10.56.1.5.1.6,FC-MGMT-MIB::fcmPortLcClass2TxOctets,Counter32,read-only,,current,,The number of octets contained in Class 2 frames transmitted out of this port.
.1.3.6.1.2.1.10.56.1.5.1.7,FC-MGMT-MIB::fcmPortLcClass2Discards,Counter32,read-only,,current,,The number of Class 2 frames that were discarded upon reception at this port.
.1.3.6.1.2.1.10.56.1.5.1.8,FC-MGMT-MIB::fcmPortLcClass2RxFbsyFrames,Counter32,read-only,,current,,The number of times that F_BSY was returned to this port as a result of a Class 2 frame that could not be delivered to the other end of the link. This can occur when either the fabric or the destination port is temporarily busy. Note that this counter will never increment for an F_Port.
.1.3.6.1.2.1.10.56.1.5.1.9,FC-MGMT-MIB::fcmPortLcClass2RxPbsyFrames,Counter32,read-only,,current,,The number of times that P_BSY was returned to this port as a result of a Class 2 frame that could not be delivered to the other end of the link. This can occur when the destination port is temporarily busy.
.1.3.6.1.2.1.10.56.1.5.1.10,FC-MGMT-MIB::fcmPortLcClass2RxFrjtFrames,Counter32,read-only,,current,,The number of times that F_RJT was returned to this port as a result of a Class 2 frame that was rejected by the fabric. Note that this counter will never increment for an F_Port.
.1.3.6.1.2.1.10.56.1.5.1.11,FC-MGMT-MIB::fcmPortLcClass2RxPrjtFrames,Counter32,read-only,,current,,The number of times that P_RJT was returned to this port as a result of a Class 2 frame that was rejected at the destination N_Port.
.1.3.6.1.2.1.10.56.1.5.1.12,FC-MGMT-MIB::fcmPortLcClass2TxFbsyFrames,Counter32,read-only,,current,,The number of times that F_BSY was generated by this port as a result of a Class 2 frame that could not be delivered because either the Fabric or the destination port was temporarily busy. Note that this counter will never increment for an N_Port.
.1.3.6.1.2.1.10.56.1.5.1.13,FC-MGMT-MIB::fcmPortLcClass2TxPbsyFrames,Counter32,read-only,,current,,The number of times that P_BSY was generated by this port as a result of a Class 2 frame that could not be delivered because the destination port was temporarily busy. Note that this counter will never increment for an F_Port.
.1.3.6.1.2.1.10.56.1.5.1.14,FC-MGMT-MIB::fcmPortLcClass2TxFrjtFrames,Counter32,read-only,,current,,The number of times that F_RJT was generated by this port as a result of a Class 2 frame being rejected by the fabric. Note that this counter will never increment for an N_Port.
.1.3.6.1.2.1.10.56.1.5.1.15,FC-MGMT-MIB::fcmPortLcClass2TxPrjtFrames,Counter32,read-only,,current,,The number of times that P_RJT was generated by this port as a result of a Class 2 frame being rejected at the destination N_Port. Note that this counter will never increment for an F_Port.
.1.3.6.1.2.1.10.56.1.5.1.16,FC-MGMT-MIB::fcmPortLcClass3RxFrames,Counter32,read-only,,current,,The number of Class 3 frames received at this port.
.1.3.6.1.2.1.10.56.1.5.1.17,FC-MGMT-MIB::fcmPortLcClass3RxOctets,Counter32,read-only,,current,,The number of octets contained in Class 3 frames received at this port.
.1.3.6.1.2.1.10.56.1.5.1.18,FC-MGMT-MIB::fcmPortLcClass3TxFrames,Counter32,read-only,,current,,The number of Class 3 frames transmitted out of this port.
.1.3.6.1.2.1.10.56.1.5.1.19,FC-MGMT-MIB::fcmPortLcClass3TxOctets,Counter32,read-only,,current,,The number of octets contained in Class 3 frames transmitted out of this port.
.1.3.6.1.2.1.10.56.1.5.1.20,FC-MGMT-MIB::fcmPortLcClass3Discards,Counter32,read-only,,current,,The number of Class 3 frames that were discarded upon reception at this port.
.1.3.6.1.2.1.10.56.1.6,FC-MGMT-MIB::fcmPortErrorsTable,,not-accessible,,current,,Error counters for Fibre Channel ports.
.1.3.6.1.2.1.10.56.1.6.1,FC-MGMT-MIB::fcmPortErrorsEntry,,not-accessible,,current,,Error counters for a Fibre Channel port. If any counter in this table suffers a discontinuity, the value of ifCounterDiscontinuityTime (defined in the IF-MIB) must be updated.
.1.3.6.1.2.1.10.56.1.6.1.1,FC-MGMT-MIB::fcmPortRxLinkResets,Counter32,read-only,,current,,The number of Link Reset (LR) Primitive Sequences received.
.1.3.6.1.2.1.10.56.1.6.1.2,FC-MGMT-MIB::fcmPortTxLinkResets,Counter32,read-only,,current,,The number of Link Reset (LR) Primitive Sequences transmitted.
.1.3.6.1.2.1.10.56.1.6.1.3,FC-MGMT-MIB::fcmPortLinkResets,Counter32,read-only,,current,,The number of times the reset link protocol was initiated on this port. This includes the number of Loop Initialization Primitive (LIP) events on an arbitrated loop port.
.1.3.6.1.2.1.10.56.1.6.1.4,FC-MGMT-MIB::fcmPortRxOfflineSequences,Counter32,read-only,,current,,The number of Offline (OLS) Primitive Sequences received at this port.
.1.3.6.1.2.1.10.56.1.6.1.5,FC-MGMT-MIB::fcmPortTxOfflineSequences,Counter32,read-only,,current,,The number of Offline (OLS) Primitive Sequences transmitted by this port.
.1.3.6.1.2.1.10.56.1.6.1.6,FC-MGMT-MIB::fcmPortLinkFailures,Counter32,read-only,,current,,The number of link failures. This count is part of FC-PH's Link Error Status Block (LESB).
.1.3.6.1.2.1.10.56.1.6.1.7,FC-MGMT-MIB::fcmPortLossofSynchs,Counter32,read-only,,current,,The number of instances of synchronization loss detected at this port. This count is part of FC-PH's Link Error Status Block (LESB).
.1.3.6.1.2.1.10.56.1.6.1.8,FC-MGMT-MIB::fcmPortLossofSignals,Counter32,read-only,,current,,The number of instances of signal loss detected at this port. This count is part of FC-PH's Link Error Status Block (LESB).
.1.3.6.1.2.1.10.56.1.6.1.9,FC-MGMT-MIB::fcmPortPrimSeqProtocolErrors,Counter32,read-only,,current,,The number of primitive sequence protocol errors detected at this port. This count is part of FC-PH's Link Error Status Block (LESB).
.1.3.6.1.2.1.10.56.1.6.1.10,FC-MGMT-MIB::fcmPortInvalidTxWords,Counter32,read-only,,current,,The number of invalid transmission words received at this port. This count is part of FC-PH's Link Error Status Block (LESB).
.1.3.6.1.2.1.10.56.1.6.1.11,FC-MGMT-MIB::fcmPortInvalidCRCs,Counter32,read-only,,current,,The number of frames received with an invalid CRC. This count is part of FC-PH's Link Error Status Block (LESB).
.1.3.6.1.2.1.10.56.1.6.1.12,FC-MGMT-MIB::fcmPortInvalidOrderedSets,Counter32,read-only,,current,,The number of invalid ordered sets received at this port.
.1.3.6.1.2.1.10.56.1.6.1.13,FC-MGMT-MIB::fcmPortFrameTooLongs,Counter32,read-only,,current,,The number of frames received at this port for which the frame length was greater than what was agreed to in FLOGI/PLOGI. This could be caused by losing the end of frame delimiter.
.1.3.6.1.2.1.10.56.1.6.1.14,FC-MGMT-MIB::fcmPortTruncatedFrames,Counter32,read-only,,current,,The number of frames received at this port for which the frame length was less than the minimum indicated by the frame header - normally 24 bytes, but it could be more if the DFCTL field indicates an optional header should have been present.
.1.3.6.1.2.1.10.56.1.6.1.15,FC-MGMT-MIB::fcmPortAddressErrors,Counter32,read-only,,current,,The number of frames received with unknown addressing; for example, an unknown SID or DID.
.1.3.6.1.2.1.10.56.1.6.1.16,FC-MGMT-MIB::fcmPortDelimiterErrors,Counter32,read-only,,current,,The number of invalid frame delimiters received at this port. An example is a frame with a class 2 start and a class 3 at the end.
.1.3.6.1.2.1.10.56.1.6.1.17,FC-MGMT-MIB::fcmPortEncodingDisparityErrors,Counter32,read-only,,current,,The number of encoding disparity errors received at this port.
.1.3.6.1.2.1.10.56.1.6.1.18,FC-MGMT-MIB::fcmPortOtherErrors,Counter32,read-only,,current,,The number of errors that were detected on this port but not counted by any other error counter in this row.
.1.3.6.1.2.1.10.56.1.7,FC-MGMT-MIB::fcmFxPortTable,,not-accessible,,current,,Additional information about Fibre Channel ports that is specific to Fx_Ports. This table will contain one entry for each fcmPortTable entry that represents an Fx_Port.
.1.3.6.1.2.1.10.56.1.7.1,FC-MGMT-MIB::fcmFxPortEntry,,not-accessible,ifIndex,current,,Each entry contains information about a specific Fx_Port.
.1.3.6.1.2.1.10.56.1.7.1.1,FC-MGMT-MIB::fcmFxPortRatov,Unsigned32,read-only,,current,,The Resource_Allocation_Timeout Value configured for this Fx_Port. This is used as the timeout value for determining when to reuse an Nx_Port resource such as a Recovery_Qualifier. It represents the Error_Detect_Timeout value (see fcmFxPortEdtov) plus twice the maximum time that a frame may be delayed within the Fabric and still be delivered.
.1.3.6.1.2.1.10.56.1.7.1.2,FC-MGMT-MIB::fcmFxPortEdtov,Unsigned32,read-only,,current,,The Error_Detect_Timeout value configured for this Fx_Port. This is used as the timeout value for detecting an error condition.
.1.3.6.1.2.1.10.56.1.7.1.3,FC-MGMT-MIB::fcmFxPortRttov,Unsigned32,read-only,,current,,The Receiver_Transmitter_Timeout value of this Fx_Port. This is used by the receiver logic to detect a Loss of Synchronization.
.1.3.6.1.2.1.10.56.1.7.1.4,FC-MGMT-MIB::fcmFxPortHoldTime,Unsigned32,read-only,,current,,The maximum time that this Fx_Port shall hold a frame before discarding the frame if it is unable to deliver the frame. The value 0 means that this Fx_Port does not support this parameter.
.1.3.6.1.2.1.10.56.1.7.1.5,FC-MGMT-MIB::fcmFxPortCapBbCreditMax,Integer32,read-only,,current,,The maximum number of receive buffers that this port is capable of making available for holding frames from attached Nx_Port(s).
.1.3.6.1.2.1.10.56.1.7.1.6,FC-MGMT-MIB::fcmFxPortCapBbCreditMin,Integer32,read-only,,current,,The minimum number of receive buffers that this port is capable of making available for holding frames from attached Nx_Port(s).
.1.3.6.1.2.1.10.56.1.7.1.7,FC-MGMT-MIB::fcmFxPortCapDataFieldSizeMax,Integer32,read-only,,current,,The maximum size in bytes of the Data Field in a frame that this Fx_Port is capable of receiving from an attached Nx_Port.
.1.3.6.1.2.1.10.56.1.7.1.8,FC-MGMT-MIB::fcmFxPortCapDataFieldSizeMin,Integer32,read-only,,current,,The minimum size in bytes of the Data Field in a frame that this Fx_Port is capable of receiving from an attached Nx_Port.
.1.3.6.1.2.1.10.56.1.7.1.9,FC-MGMT-MIB::fcmFxPortCapClass2SeqDeliv,INTEGER,read-only,,current,true(1):false(2),An indication of whether this Fx_Port is capable of supporting Class 2 Sequential Delivery.
.1.3.6.1.2.1.10.56.1.7.1.10,FC-MGMT-MIB::fcmFxPortCapClass3SeqDeliv,INTEGER,read-only,,current,true(1):false(2),An indication of whether this Fx_Port is capable of supporting Class 3 Sequential Delivery.
.1.3.6.1.2.1.10.56.1.7.1.11,FC-MGMT-MIB::fcmFxPortCapHoldTimeMax,Unsigned32,read-only,,current,,The maximum holding time that this Fx_Port is capable of supporting.
.1.3.6.1.2.1.10.56.1.7.1.12,FC-MGMT-MIB::fcmFxPortCapHoldTimeMin,Unsigned32,read-only,,current,,The minimum holding time that this Fx_Port is capable of supporting.
.1.3.6.1.2.1.10.56.1.8,FC-MGMT-MIB::fcmISPortTable,,not-accessible,,current,,Additional information about E_Ports, B_Ports, and any other type of Fibre Channel port to which inter-switch links can be connected. This table will contain one entry for each fcmPortTable entry that represents such a port.
.1.3.6.1.2.1.10.56.1.8.1,FC-MGMT-MIB::fcmISPortEntry,,not-accessible,ifIndex,current,,Each entry contains information about a specific port connected to an inter-switch link.
.1.3.6.1.2.1.10.56.1.8.1.1,FC-MGMT-MIB::fcmISPortClassFCredit,Integer32,read-write,,current,,The maximum number of Class F data frames that can be transmitted by the inter-switch port without receipt of ACK or Link_Response frames.
.1.3.6.1.2.1.10.56.1.8.1.2,FC-MGMT-MIB::fcmISPortClassFDataFieldSize,Integer32,read-only,,current,,The Receive Data Field Size that the inter-switch port has agreed to support for Class F frames to/from this port. The size specifies the largest Data Field Size for an FT_1 frame.
.1.3.6.1.2.1.10.56.1.9,FC-MGMT-MIB::fcmFLoginTable,,not-accessible,,current,,A table that contains one entry for each Nx_Port logged- in/attached to a particular Fx_Port in the switch. Each entry contains the services parameters established during the most recent Fabric Login, explicit or implicit. Note that an Fx_Port may have one or more Nx_Ports attached to it.
.1.3.6.1.2.1.10.56.1.9.1,FC-MGMT-MIB::fcmFLoginEntry,,not-accessible,ifIndex:fcmFLoginNxPortIndex,current,,An entry containing service parameters established from a successful Fabric Login.
.1.3.6.1.2.1.10.56.1.9.1.1,FC-MGMT-MIB::fcmFLoginNxPortIndex,Unsigned32,not-accessible,,current,,An arbitrary integer that uniquely identifies an Nx_Port amongst all those attached to the Fx_Port indicated by ifIndex. After a value of this object is assigned to a particular Nx_Port, that value can be re-used when and only when it is assigned to the same Nx_Port, or, after a reset of the value of the relevant instance of ifCounterDiscontinuityTime.
.1.3.6.1.2.1.10.56.1.9.1.2,FC-MGMT-MIB::fcmFLoginPortWwn,OCTET,read-only,,current,,The port name of the attached Nx_Port, or the zero-length string if unknown.
.1.3.6.1.2.1.10.56.1.9.1.3,FC-MGMT-MIB::fcmFLoginNodeWwn,OCTET,read-only,,current,,The node name of the attached Nx_Port, or the zero-length string if unknown.
.1.3.6.1.2.1.10.56.1.9.1.4,FC-MGMT-MIB::fcmFLoginBbCreditModel,INTEGER,read-only,,current,regular(1):alternate(2),The buffer-to-buffer credit model in use by the Fx_Port.
.1.3.6.1.2.1.10.56.1.9.1.5,FC-MGMT-MIB::fcmFLoginBbCredit,Integer32,read-only,,current,,The number of buffers available for holding frames to be transmitted to the attached Nx_Port. These buffers are for buffer-to-buffer flow control in the direction from Fx_Port to Nx_Port.
.1.3.6.1.2.1.10.56.1.9.1.6,FC-MGMT-MIB::fcmFLoginClassesAgreed,BITS,read-only,,current,classF(0):class1(1):class2(2):class3(3):class4(4):class5(5):class6(6),The Classes of Service that the Fx_Port has agreed to support for this Nx_Port.
.1.3.6.1.2.1.10.56.1.9.1.7,FC-MGMT-MIB::fcmFLoginClass2SeqDelivAgreed,INTEGER,read-only,,current,true(1):false(2),An indication of whether the Fx_Port has agreed to support Class 2 sequential delivery for this Nx_Port. This is only meaningful if Class 2 service has been agreed upon.
.1.3.6.1.2.1.10.56.1.9.1.8,FC-MGMT-MIB::fcmFLoginClass2DataFieldSize,Integer32,read-only,,current,,The Receive Data Field Size that the Fx_Port has agreed to support for Class 2 frames to/from this Nx_Port. The size specifies the largest Data Field Size for an FT_1 frame. This is only meaningful if Class 2 service has been agreed upon.
.1.3.6.1.2.1.10.56.1.9.1.9,FC-MGMT-MIB::fcmFLoginClass3SeqDelivAgreed,INTEGER,read-only,,current,true(1):false(2),An indication of whether the Fx_Port has agreed to support Class 3 sequential delivery for this Nx_Port. This is only meaningful if Class 3 service has been agreed upon.
.1.3.6.1.2.1.10.56.1.9.1.10,FC-MGMT-MIB::fcmFLoginClass3DataFieldSize,Integer32,read-only,,current,,The Receive Data Field Size that the Fx_Port has agreed to support for Class 3 frames to/from this Nx_Port. The size specifies the largest Data Field Size for an FT_1 frame. This is only meaningful if Class 3 service has been agreed upon.
.1.3.6.1.2.1.10.56.1.10,FC-MGMT-MIB::fcmLinkTable,,not-accessible,,current,,A table containing any Fibre Channel link information that is known to local Fibre Channel managed instances. One end of such a link is typically at a local port, but the table can also contain information on links for which neither end is a local port. If one end of a link terminates locally, then that end is termed 'end1'; the other end is termed 'end2'.
.1.3.6.1.2.1.10.56.1.10.1,FC-MGMT-MIB::fcmLinkEntry,,not-accessible,fcmInstanceIndex:fcmLinkIndex,current,,An entry containing information that a particular Fibre Channel managed instance has about a Fibre Channel link. The two ends of the link are called 'end1' and 'end2'.
.1.3.6.1.2.1.10.56.1.10.1.1,FC-MGMT-MIB::fcmLinkIndex,Unsigned32,not-accessible,,current,,An arbitrary integer that uniquely identifies one link within the set of links about which a particular managed instance has information.
.1.3.6.1.2.1.10.56.1.10.1.2,FC-MGMT-MIB::fcmLinkEnd1NodeWwn,OCTET,read-only,,current,,The node name of end1, or the zero-length string if unknown.
.1.3.6.1.2.1.10.56.1.10.1.3,FC-MGMT-MIB::fcmLinkEnd1PhysPortNumber,Unsigned32,read-only,,current,,The physical port number of end1, or zero if unknown.
.1.3.6.1.2.1.10.56.1.10.1.4,FC-MGMT-MIB::fcmLinkEnd1PortWwn,OCTET,read-only,,current,,The port WWN of end1, or the zero-length string if unknown. ('end1' is local if this value is equal to the value of fcmPortWwn in one of the rows of the fcmPortTable.)
.1.3.6.1.2.1.10.56.1.10.1.5,FC-MGMT-MIB::fcmLinkEnd2NodeWwn,OCTET,read-only,,current,,The node name of end2, or the zero-length string if unknown.
.1.3.6.1.2.1.10.56.1.10.1.6,FC-MGMT-MIB::fcmLinkEnd2PhysPortNumber,Unsigned32,read-only,,current,,The physical port number of end2, or zero if unknown.
.1.3.6.1.2.1.10.56.1.10.1.7,FC-MGMT-MIB::fcmLinkEnd2PortWwn,OCTET,read-only,,current,,The port WWN of end2, or the zero-length string if unknown.
.1.3.6.1.2.1.10.56.1.10.1.8,FC-MGMT-MIB::fcmLinkEnd2AgentAddress,OCTET,read-only,,current,,The address of the management agent for the Fibre Channel Interconnect Element or Platform of which end2 is a part. The GS-4 specification provides some information about management agents. If the address is unknown, the value of this object is the zero-length string.
.1.3.6.1.2.1.10.56.1.10.1.9,FC-MGMT-MIB::fcmLinkEnd2PortType,Unsigned32,read-only,,current,,The port type of end2.
.1.3.6.1.2.1.10.56.1.10.1.10,FC-MGMT-MIB::fcmLinkEnd2UnitType,BITS,read-only,,current,other(0):hub(1):switch(2):bridge(3):gateway(4):host(5):storageSubsys(6):storageAccessDev(7):nas(8):wdmux(9):storageDevice(10),The type of/function(s) performed by the Fibre Channel Interconnect Element or Platform of which end2 is a part.
.1.3.6.1.2.1.10.56.1.10.1.11,FC-MGMT-MIB::fcmLinkEnd2FcAddressId,OCTET,read-only,,current,,The Fibre Channel Address ID of end2, or the zero-length string if unknown.
.1.3.6.1.2.1.10.56.2,FC-MGMT-MIB::fcmgmtNotifications,,,,,,
.1.3.6.1.2.1.10.56.2.0,FC-MGMT-MIB::fcmgmtNotifPrefix,,,,,,
.1.3.6.1.2.1.10.56.3,FC-MGMT-MIB::fcmgmtConformance,,,,,,
.1.3.6.1.2.1.10.56.3.1,FC-MGMT-MIB::fcmgmtCompliances,,,,,,
.1.3.6.1.2.1.10.56.3.1.1,FC-MGMT-MIB::fcmgmtCompliance,,,,,,Describes the requirements for compliance to this Fibre Channel Management MIB.
.1.3.6.1.2.1.10.56.3.2,FC-MGMT-MIB::fcmgmtGroups,,,,,,
.1.3.6.1.2.1.10.56.3.2.1,FC-MGMT-MIB::fcmInstanceBasicGroup,,,,,,Basic information about Fibre Channel managed instances.
.1.3.6.1.2.1.10.56.3.2.2,FC-MGMT-MIB::fcmSwitchBasicGroup,,,,,,Basic information about Fibre Channel switches.
.1.3.6.1.2.1.10.56.3.2.3,FC-MGMT-MIB::fcmPortBasicGroup,,,,,,Basic information about Fibre Channel ports.
.1.3.6.1.2.1.10.56.3.2.4,FC-MGMT-MIB::fcmPortStatsGroup,,,,,,Traffic statistics, which are not specific to any one class of service, for Fibre Channel ports.
.1.3.6.1.2.1.10.56.3.2.5,FC-MGMT-MIB::fcmPortClass23StatsGroup,,,,,,Traffic statistics for Class 2 and Class 3 traffic on Fibre Channel ports.
.1.3.6.1.2.1.10.56.3.2.6,FC-MGMT-MIB::fcmPortClassFStatsGroup,,,,,,Traffic statistics for Class F traffic on Fibre Channel ports.
.1.3.6.1.2.1.10.56.3.2.7,FC-MGMT-MIB::fcmPortLcStatsGroup,,,,,,Low-capacity (32-bit) statistics for Fibre Channel ports.
.1.3.6.1.2.1.10.56.3.2.8,FC-MGMT-MIB::fcmPortErrorsGroup,,,,,,Error statistics for Fibre Channel ports.
.1.3.6.1.2.1.10.56.3.2.9,FC-MGMT-MIB::fcmSwitchPortGroup,,,,,,Information about ports on a Fibre Channel switch.
.1.3.6.1.2.1.10.56.3.2.10,FC-MGMT-MIB::fcmSwitchLoginGroup,,,,,,Information known to a Fibre Channel switch about attached/logged-in Nx_Ports.
.1.3.6.1.2.1.10.56.3.2.11,FC-MGMT-MIB::fcmLinkBasicGroup,,,,,,Information about Fibre Channel links.
.1.3.6.1.2.1.10.131,TUNNEL-MIB::tunnelMIB,,,,,,The MIB module for management of IP Tunnels, independent of the specific encapsulation scheme in use. Copyright (C) The Internet Society (2005). This version of this MIB module is part of RFC 4087; see the RFC itself for full legal notices.
.1.3.6.1.2.1.10.131.1,TUNNEL-MIB::tunnelMIBObjects,,,,,,
.1.3.6.1.2.1.10.131.1.1,TUNNEL-MIB::tunnel,,,,,,
.1.3.6.1.2.1.10.131.1.1.1,TUNNEL-MIB::tunnelIfTable,,not-accessible,,current,,The (conceptual) table containing information on configured tunnels.
.1.3.6.1.2.1.10.131.1.1.1.1,TUNNEL-MIB::tunnelIfEntry,,not-accessible,ifIndex,current,,An entry (conceptual row) containing the information on a particular configured tunnel.
.1.3.6.1.2.1.10.131.1.1.1.1.1,TUNNEL-MIB::tunnelIfLocalAddress,IpAddress,read-only,,deprecated,,The address of the local endpoint of the tunnel (i.e., the source address used in the outer IP header), or 0.0.0.0 if unknown or if the tunnel is over IPv6. Since this object does not support IPv6, it is deprecated in favor of tunnelIfLocalInetAddress.
.1.3.6.1.2.1.10.131.1.1.1.1.2,TUNNEL-MIB::tunnelIfRemoteAddress,IpAddress,read-only,,deprecated,,The address of the remote endpoint of the tunnel (i.e., the destination address used in the outer IP header), or 0.0.0.0 if unknown, or an IPv6 address, or the tunnel is not a point-to-point link (e.g., if it is a 6to4 tunnel). Since this object does not support IPv6, it is deprecated in favor of tunnelIfRemoteInetAddress.
.1.3.6.1.2.1.10.131.1.1.1.1.3,TUNNEL-MIB::tunnelIfEncapsMethod,INTEGER,read-only,,current,other(1):direct(2):gre(3):minimal(4):l2tp(5):pptp(6):l2f(7):udp(8):atmp(9):msdp(10):sixToFour(11):sixOverFour(12):isatap(13):teredo(14):ipHttps(15):softwireMesh(16):dsLite(17):aplusp(18),The encapsulation method used by the tunnel.
.1.3.6.1.2.1.10.131.1.1.1.1.4,TUNNEL-MIB::tunnelIfHopLimit,Integer32,read-write,,current,,The IPv4 TTL or IPv6 Hop Limit to use in the outer IP header. A value of 0 indicates that the value is copied from the payload's header.
.1.3.6.1.2.1.10.131.1.1.1.1.5,TUNNEL-MIB::tunnelIfSecurity,INTEGER,read-only,,current,none(1):ipsec(2):other(3),The method used by the tunnel to secure the outer IP header. The value ipsec indicates that IPsec is used between the tunnel endpoints for authentication or encryption or both. More specific security-related information may be available in a MIB module for the security protocol in use.
.1.3.6.1.2.1.10.131.1.1.1.1.6,TUNNEL-MIB::tunnelIfTOS,Integer32,read-write,,current,,The method used to set the high 6 bits (the differentiated services codepoint) of the IPv4 TOS or IPv6 Traffic Class in the outer IP header. A value of -1 indicates that the bits are copied from the payload's header. A value of -2 indicates that a traffic conditioner is invoked and more information may be available in a traffic conditioner MIB module. A value between 0 and 63 inclusive indicates that the bit field is set to the indicated value. Note: instead of the name tunnelIfTOS, a better name would have been tunnelIfDSCPMethod, but the existing name appeared in RFC 2667 and existing objects cannot be renamed.
.1.3.6.1.2.1.10.131.1.1.1.1.7,TUNNEL-MIB::tunnelIfFlowLabel,Integer32,read-write,,current,,The method used to set the IPv6 Flow Label value. This object need not be present in rows where tunnelIfAddressType indicates the tunnel is not over IPv6. A value of -1 indicates that a traffic conditioner is invoked and more information may be available in a traffic conditioner MIB. Any other value indicates that the Flow Label field is set to the indicated value.
.1.3.6.1.2.1.10.131.1.1.1.1.8,TUNNEL-MIB::tunnelIfAddressType,INTEGER,read-write,,current,unknown(0):ipv4(1):ipv6(2):ipv4z(3):ipv6z(4):dns(16),The type of address in the corresponding tunnelIfLocalInetAddress and tunnelIfRemoteInetAddress objects.
.1.3.6.1.2.1.10.131.1.1.1.1.9,TUNNEL-MIB::tunnelIfLocalInetAddress,OCTET,read-write,,current,,The address of the local endpoint of the tunnel (i.e., the source address used in the outer IP header). If the address is unknown, the value is 0.0.0.0 for IPv4 or :: for IPv6. The type of this object is given by tunnelIfAddressType.
.1.3.6.1.2.1.10.131.1.1.1.1.10,TUNNEL-MIB::tunnelIfRemoteInetAddress,OCTET,read-write,,current,,The address of the remote endpoint of the tunnel (i.e., the destination address used in the outer IP header). If the address is unknown or the tunnel is not a point-to-point link (e.g., if it is a 6to4 tunnel), the value is 0.0.0.0 for tunnels over IPv4 or :: for tunnels over IPv6. The type of this object is given by tunnelIfAddressType.
.1.3.6.1.2.1.10.131.1.1.1.1.11,TUNNEL-MIB::tunnelIfEncapsLimit,Integer32,read-write,,current,,The maximum number of additional encapsulations permitted for packets undergoing encapsulation at this node. A value of -1 indicates that no limit is present (except as a result of the packet size).
.1.3.6.1.2.1.10.131.1.1.2,TUNNEL-MIB::tunnelConfigTable,,not-accessible,,deprecated,,The (conceptual) table containing information on configured tunnels. This table can be used to map a set of tunnel endpoints to the associated ifIndex value. It can also be used for row creation. Note that every row in the tunnelIfTable with a fixed IPv4 destination address should have a corresponding row in the tunnelConfigTable, regardless of whether it was created via SNMP. Since this table does not support IPv6, it is deprecated in favor of tunnelInetConfigTable.
.1.3.6.1.2.1.10.131.1.1.2.1,TUNNEL-MIB::tunnelConfigEntry,,not-accessible,tunnelConfigLocalAddress:tunnelConfigRemoteAddress:tunnelConfigEncapsMethod:tunnelConfigID,deprecated,,An entry (conceptual row) containing the information on a particular configured tunnel. Since this entry does not support IPv6, it is deprecated in favor of tunnelInetConfigEntry.
.1.3.6.1.2.1.10.131.1.1.2.1.1,TUNNEL-MIB::tunnelConfigLocalAddress,IpAddress,not-accessible,,deprecated,,The address of the local endpoint of the tunnel, or 0.0.0.0 if the device is free to choose any of its addresses at tunnel establishment time. Since this object does not support IPv6, it is deprecated in favor of tunnelInetConfigLocalAddress.
.1.3.6.1.2.1.10.131.1.1.2.1.2,TUNNEL-MIB::tunnelConfigRemoteAddress,IpAddress,not-accessible,,deprecated,,The address of the remote endpoint of the tunnel. Since this object does not support IPv6, it is deprecated in favor of tunnelInetConfigRemoteAddress.
.1.3.6.1.2.1.10.131.1.1.2.1.3,TUNNEL-MIB::tunnelConfigEncapsMethod,INTEGER,not-accessible,,deprecated,other(1):direct(2):gre(3):minimal(4):l2tp(5):pptp(6):l2f(7):udp(8):atmp(9):msdp(10):sixToFour(11):sixOverFour(12):isatap(13):teredo(14):ipHttps(15):softwireMesh(16):dsLite(17):aplusp(18),The encapsulation method used by the tunnel. Since this object does not support IPv6, it is deprecated in favor of tunnelInetConfigEncapsMethod.
.1.3.6.1.2.1.10.131.1.1.2.1.4,TUNNEL-MIB::tunnelConfigID,Integer32,not-accessible,,deprecated,,An identifier used to distinguish between multiple tunnels of the same encapsulation method, with the same endpoints. If the encapsulation protocol only allows one tunnel per set of endpoint addresses (such as for GRE or IP-in-IP), the value of this object is 1. For encapsulation methods (such as L2F) which allow multiple parallel tunnels, the manager is responsible for choosing any ID which does not conflict with an existing row, such as choosing a random number. Since this object does not support IPv6, it is deprecated in favor of tunnelInetConfigID.
.1.3.6.1.2.1.10.131.1.1.2.1.5,TUNNEL-MIB::tunnelConfigIfIndex,Integer32,read-only,,deprecated,,If the value of tunnelConfigStatus for this row is active, then this object contains the value of ifIndex corresponding to the tunnel interface. A value of 0 is not legal in the active state, and means that the interface index has not yet been assigned. Since this object does not support IPv6, it is deprecated in favor of tunnelInetConfigIfIndex.
.1.3.6.1.2.1.10.131.1.1.2.1.6,TUNNEL-MIB::tunnelConfigStatus,INTEGER,read-create,,deprecated,active(1):notInService(2):notReady(3):createAndGo(4):createAndWait(5):destroy(6),The status of this row, by which new entries may be created, or old entries deleted from this table. The agent need not support setting this object to createAndWait or notInService since there are no other writable objects in this table, and writable objects in rows of corresponding tables such as the tunnelIfTable may be modified while this row is active. To create a row in this table for an encapsulation method which does not support multiple parallel tunnels with the same endpoints, the management station should simply use a tunnelConfigID of 1, and set tunnelConfigStatus to createAndGo. For encapsulation methods such as L2F which allow multiple parallel tunnels, the management station may select a pseudo-random number to use as the tunnelConfigID and set tunnelConfigStatus to createAndGo. In the event that this ID is already in use and an inconsistentValue is returned in response to the set operation, the management station should simply select a new pseudo-random number and retry the operation. Creating a row in this table will cause an interface index to be assigned by the agent in an implementation-dependent manner, and corresponding rows will be instantiated in the ifTable and the tunnelIfTable. The status of this row will become active as soon as the agent assigns the interface index, regardless of whether the interface is operationally up. Deleting a row in this table will likewise delete the corresponding row in the ifTable and in the tunnelIfTable. Since this object does not support IPv6, it is deprecated in favor of tunnelInetConfigStatus.
.1.3.6.1.2.1.10.131.1.1.3,TUNNEL-MIB::tunnelInetConfigTable,,not-accessible,,current,,The (conceptual) table containing information on configured tunnels. This table can be used to map a set of tunnel endpoints to the associated ifIndex value. It can also be used for row creation. Note that every row in the tunnelIfTable with a fixed destination address should have a corresponding row in the tunnelInetConfigTable, regardless of whether it was created via SNMP.
.1.3.6.1.2.1.10.131.1.1.3.1,TUNNEL-MIB::tunnelInetConfigEntry,,not-accessible,tunnelInetConfigAddressType:tunnelInetConfigLocalAddress:tunnelInetConfigRemoteAddress:tunnelInetConfigEncapsMethod:tunnelInetConfigID,current,,An entry (conceptual row) containing the information on a particular configured tunnel. Note that there is a 128 subid maximum for object OIDs. Implementers need to be aware that if the total number of octets in tunnelInetConfigLocalAddress and tunnelInetConfigRemoteAddress exceeds 110 then OIDs of column instances in this table will have more than 128 sub-identifiers and cannot be accessed using SNMPv1, SNMPv2c, or SNMPv3. In practice this is not expected to be a problem since IPv4 and IPv6 addresses will not cause the limit to be reached, but if other types are supported by an agent, care must be taken to ensure that the sum of the lengths do not cause the limit to be exceeded.
.1.3.6.1.2.1.10.131.1.1.3.1.1,TUNNEL-MIB::tunnelInetConfigAddressType,INTEGER,not-accessible,,current,unknown(0):ipv4(1):ipv6(2):ipv4z(3):ipv6z(4):dns(16),The address type over which the tunnel encapsulates packets.
.1.3.6.1.2.1.10.131.1.1.3.1.2,TUNNEL-MIB::tunnelInetConfigLocalAddress,OCTET,not-accessible,,current,,The address of the local endpoint of the tunnel, or 0.0.0.0 (for IPv4) or :: (for IPv6) if the device is free to choose any of its addresses at tunnel establishment time.
.1.3.6.1.2.1.10.131.1.1.3.1.3,TUNNEL-MIB::tunnelInetConfigRemoteAddress,OCTET,not-accessible,,current,,The address of the remote endpoint of the tunnel.
.1.3.6.1.2.1.10.131.1.1.3.1.4,TUNNEL-MIB::tunnelInetConfigEncapsMethod,INTEGER,not-accessible,,current,other(1):direct(2):gre(3):minimal(4):l2tp(5):pptp(6):l2f(7):udp(8):atmp(9):msdp(10):sixToFour(11):sixOverFour(12):isatap(13):teredo(14):ipHttps(15):softwireMesh(16):dsLite(17):aplusp(18),The encapsulation method used by the tunnel.
.1.3.6.1.2.1.10.131.1.1.3.1.5,TUNNEL-MIB::tunnelInetConfigID,Integer32,not-accessible,,current,,An identifier used to distinguish between multiple tunnels of the same encapsulation method, with the same endpoints. If the encapsulation protocol only allows one tunnel per set of endpoint addresses (such as for GRE or IP-in-IP), the value of this object is 1. For encapsulation methods (such as L2F) which allow multiple parallel tunnels, the manager is responsible for choosing any ID which does not conflict with an existing row, such as choosing a random number.
.1.3.6.1.2.1.10.131.1.1.3.1.6,TUNNEL-MIB::tunnelInetConfigIfIndex,Integer32,read-only,,current,,If the value of tunnelInetConfigStatus for this row is active, then this object contains the value of ifIndex corresponding to the tunnel interface. A value of 0 is not legal in the active state, and means that the interface index has not yet been assigned.
.1.3.6.1.2.1.10.131.1.1.3.1.7,TUNNEL-MIB::tunnelInetConfigStatus,INTEGER,read-create,,current,active(1):notInService(2):notReady(3):createAndGo(4):createAndWait(5):destroy(6),The status of this row, by which new entries may be created, or old entries deleted from this table. The agent need not support setting this object to createAndWait or notInService since there are no other writable objects in this table, and writable objects in rows of corresponding tables such as the tunnelIfTable may be modified while this row is active. To create a row in this table for an encapsulation method which does not support multiple parallel tunnels with the same endpoints, the management station should simply use a tunnelInetConfigID of 1, and set tunnelInetConfigStatus to createAndGo. For encapsulation methods such as L2F which allow multiple parallel tunnels, the management station may select a pseudo-random number to use as the tunnelInetConfigID and set tunnelInetConfigStatus to createAndGo. In the event that this ID is already in use and an inconsistentValue is returned in response to the set operation, the management station should simply select a new pseudo-random number and retry the operation. Creating a row in this table will cause an interface index to be assigned by the agent in an implementation-dependent manner, and corresponding rows will be instantiated in the ifTable and the tunnelIfTable. The status of this row will become active as soon as the agent assigns the interface index, regardless of whether the interface is operationally up. Deleting a row in this table will likewise delete the corresponding row in the ifTable and in the tunnelIfTable.
.1.3.6.1.2.1.10.131.1.1.3.1.8,TUNNEL-MIB::tunnelInetConfigStorageType,INTEGER,read-create,,current,other(1):volatile(2):nonVolatile(3):permanent(4):readOnly(5),The storage type of this row. If the row is permanent(4), no objects in the row need be writable.
.1.3.6.1.2.1.10.131.2,TUNNEL-MIB::tunnelMIBConformance,,,,,,
.1.3.6.1.2.1.10.131.2.1,TUNNEL-MIB::tunnelMIBCompliances,,,,,,
.1.3.6.1.2.1.10.131.2.1.1,TUNNEL-MIB::tunnelMIBCompliance,,,,,,The (deprecated) IPv4-only compliance statement for the IP Tunnel MIB. This is deprecated in favor of tunnelMIBInetFullCompliance and tunnelMIBInetReadOnlyCompliance.
.1.3.6.1.2.1.10.131.2.1.2,TUNNEL-MIB::tunnelMIBInetFullCompliance,,,,,,The full compliance statement for the IP Tunnel MIB.
.1.3.6.1.2.1.10.131.2.1.3,TUNNEL-MIB::tunnelMIBInetReadOnlyCompliance,,,,,,The read-only compliance statement for the IP Tunnel MIB.
.1.3.6.1.2.1.10.131.2.2,TUNNEL-MIB::tunnelMIBGroups,,,,,,
.1.3.6.1.2.1.10.131.2.2.1,TUNNEL-MIB::tunnelMIBBasicGroup,,,,,,A collection of objects to support basic management of IPv4 Tunnels. Since this group cannot support IPv6, it is deprecated in favor of tunnelMIBInetGroup.
.1.3.6.1.2.1.10.131.2.2.2,TUNNEL-MIB::tunnelMIBInetGroup,,,,,,A collection of objects to support basic management of IPv4 and IPv6 Tunnels.
.1.3.6.1.2.1.10.166,MPLS-TC-STD-MIB::mplsStdMIB,,,,,,
.1.3.6.1.2.1.10.166.1,MPLS-TC-STD-MIB::mplsTCStdMIB,,,,,,Copyright (C) The Internet Society (2004). The initial version of this MIB module was published in RFC 3811. For full legal notices see the RFC itself or see: http://www.ietf.org/copyrights/ianamib.html This MIB module defines TEXTUAL-CONVENTIONs for concepts used in Multiprotocol Label Switching (MPLS) networks.
.1.3.6.1.2.1.11,SNMPv2-MIB::snmp,,,,,,
.1.3.6.1.2.1.11.1,SNMPv2-MIB::snmpInPkts,Counter32,read-only,,current,,The total number of messages delivered to the SNMP entity from the transport service.
.1.3.6.1.2.1.11.2,SNMPv2-MIB::snmpOutPkts,Counter32,read-only,,obsolete,,The total number of SNMP Messages which were passed from the SNMP protocol entity to the transport service.
.1.3.6.1.2.1.11.3,SNMPv2-MIB::snmpInBadVersions,Counter32,read-only,,current,,The total number of SNMP messages which were delivered to the SNMP entity and were for an unsupported SNMP version.
.1.3.6.1.2.1.11.4,SNMPv2-MIB::snmpInBadCommunityNames,Counter32,read-only,,current,,The total number of community-based SNMP messages (for example, SNMPv1) delivered to the SNMP entity which used an SNMP community name not known to said entity. Also, implementations which authenticate community-based SNMP messages using check(s) in addition to matching the community name (for example, by also checking whether the message originated from a transport address allowed to use a specified community name) MAY include in this value the number of messages which failed the additional check(s). It is strongly RECOMMENDED that the documentation for any security model which is used to authenticate community-based SNMP messages specify the precise conditions that contribute to this value.
.1.3.6.1.2.1.11.5,SNMPv2-MIB::snmpInBadCommunityUses,Counter32,read-only,,current,,The total number of community-based SNMP messages (for example, SNMPv1) delivered to the SNMP entity which represented an SNMP operation that was not allowed for the SNMP community named in the message. The precise conditions under which this counter is incremented (if at all) depend on how the SNMP entity implements its access control mechanism and how its applications interact with that access control mechanism. It is strongly RECOMMENDED that the documentation for any access control mechanism which is used to control access to and visibility of MIB instrumentation specify the precise conditions that contribute to this value.
.1.3.6.1.2.1.11.6,SNMPv2-MIB::snmpInASNParseErrs,Counter32,read-only,,current,,The total number of ASN.1 or BER errors encountered by the SNMP entity when decoding received SNMP messages.
.1.3.6.1.2.1.11.8,SNMPv2-MIB::snmpInTooBigs,Counter32,read-only,,obsolete,,The total number of SNMP PDUs which were delivered to the SNMP protocol entity and for which the value of the error-status field was `tooBig'.
.1.3.6.1.2.1.11.9,SNMPv2-MIB::snmpInNoSuchNames,Counter32,read-only,,obsolete,,The total number of SNMP PDUs which were delivered to the SNMP protocol entity and for which the value of the error-status field was `noSuchName'.
.1.3.6.1.2.1.11.10,SNMPv2-MIB::snmpInBadValues,Counter32,read-only,,obsolete,,The total number of SNMP PDUs which were delivered to the SNMP protocol entity and for which the value of the error-status field was `badValue'.
.1.3.6.1.2.1.11.11,SNMPv2-MIB::snmpInReadOnlys,Counter32,read-only,,obsolete,,The total number valid SNMP PDUs which were delivered to the SNMP protocol entity and for which the value of the error-status field was `readOnly'. It should be noted that it is a protocol error to generate an SNMP PDU which contains the value `readOnly' in the error-status field, as such this object is provided as a means of detecting incorrect implementations of the SNMP.
.1.3.6.1.2.1.11.12,SNMPv2-MIB::snmpInGenErrs,Counter32,read-only,,obsolete,,The total number of SNMP PDUs which were delivered to the SNMP protocol entity and for which the value of the error-status field was `genErr'.
.1.3.6.1.2.1.11.13,SNMPv2-MIB::snmpInTotalReqVars,Counter32,read-only,,obsolete,,The total number of MIB objects which have been retrieved successfully by the SNMP protocol entity as the result of receiving valid SNMP Get-Request and Get-Next PDUs.
.1.3.6.1.2.1.11.14,SNMPv2-MIB::snmpInTotalSetVars,Counter32,read-only,,obsolete,,The total number of MIB objects which have been altered successfully by the SNMP protocol entity as the result of receiving valid SNMP Set-Request PDUs.
.1.3.6.1.2.1.11.15,SNMPv2-MIB::snmpInGetRequests,Counter32,read-only,,obsolete,,The total number of SNMP Get-Request PDUs which have been accepted and processed by the SNMP protocol entity.
.1.3.6.1.2.1.11.16,SNMPv2-MIB::snmpInGetNexts,Counter32,read-only,,obsolete,,The total number of SNMP Get-Next PDUs which have been accepted and processed by the SNMP protocol entity.
.1.3.6.1.2.1.11.17,SNMPv2-MIB::snmpInSetRequests,Counter32,read-only,,obsolete,,The total number of SNMP Set-Request PDUs which have been accepted and processed by the SNMP protocol entity.
.1.3.6.1.2.1.11.18,SNMPv2-MIB::snmpInGetResponses,Counter32,read-only,,obsolete,,The total number of SNMP Get-Response PDUs which have been accepted and processed by the SNMP protocol entity.
.1.3.6.1.2.1.11.19,SNMPv2-MIB::snmpInTraps,Counter32,read-only,,obsolete,,The total number of SNMP Trap PDUs which have been accepted and processed by the SNMP protocol entity.
.1.3.6.1.2.1.11.20,SNMPv2-MIB::snmpOutTooBigs,Counter32,read-only,,obsolete,,The total number of SNMP PDUs which were generated by the SNMP protocol entity and for which the value of the error-status field was `tooBig.'
.1.3.6.1.2.1.11.21,SNMPv2-MIB::snmpOutNoSuchNames,Counter32,read-only,,obsolete,,The total number of SNMP PDUs which were generated by the SNMP protocol entity and for which the value of the error-status was `noSuchName'.
.1.3.6.1.2.1.11.22,SNMPv2-MIB::snmpOutBadValues,Counter32,read-only,,obsolete,,The total number of SNMP PDUs which were generated by the SNMP protocol entity and for which the value of the error-status field was `badValue'.
.1.3.6.1.2.1.11.24,SNMPv2-MIB::snmpOutGenErrs,Counter32,read-only,,obsolete,,The total number of SNMP PDUs which were generated by the SNMP protocol entity and for which the value of the error-status field was `genErr'.
.1.3.6.1.2.1.11.25,SNMPv2-MIB::snmpOutGetRequests,Counter32,read-only,,obsolete,,The total number of SNMP Get-Request PDUs which have been generated by the SNMP protocol entity.
.1.3.6.1.2.1.11.26,SNMPv2-MIB::snmpOutGetNexts,Counter32,read-only,,obsolete,,The total number of SNMP Get-Next PDUs which have been generated by the SNMP protocol entity.
.1.3.6.1.2.1.11.27,SNMPv2-MIB::snmpOutSetRequests,Counter32,read-only,,obsolete,,The total number of SNMP Set-Request PDUs which have been generated by the SNMP protocol entity.
.1.3.6.1.2.1.11.28,SNMPv2-MIB::snmpOutGetResponses,Counter32,read-only,,obsolete,,The total number of SNMP Get-Response PDUs which have been generated by the SNMP protocol entity.
.1.3.6.1.2.1.11.29,SNMPv2-MIB::snmpOutTraps,Counter32,read-only,,obsolete,,The total number of SNMP Trap PDUs which have been generated by the SNMP protocol entity.
.1.3.6.1.2.1.11.30,SNMPv2-MIB::snmpEnableAuthenTraps,INTEGER,read-write,,current,enabled(1):disabled(2),Indicates whether the SNMP entity is permitted to generate authenticationFailure traps. The value of this object overrides any configuration information; as such, it provides a means whereby all authenticationFailure traps may be disabled. Note that it is strongly recommended that this object be stored in non-volatile memory so that it remains constant across re-initializations of the network management system.
.1.3.6.1.2.1.11.31,SNMPv2-MIB::snmpSilentDrops,Counter32,read-only,,current,,The total number of Confirmed Class PDUs (such as GetRequest-PDUs, GetNextRequest-PDUs, GetBulkRequest-PDUs, SetRequest-PDUs, and InformRequest-PDUs) delivered to the SNMP entity which were silently dropped because the size of a reply containing an alternate Response Class PDU (such as a Response-PDU) with an empty variable-bindings field was greater than either a local constraint or the maximum message size associated with the originator of the request.
.1.3.6.1.2.1.11.32,SNMPv2-MIB::snmpProxyDrops,Counter32,read-only,,current,,The total number of Confirmed Class PDUs (such as GetRequest-PDUs, GetNextRequest-PDUs, GetBulkRequest-PDUs, SetRequest-PDUs, and InformRequest-PDUs) delivered to the SNMP entity which were silently dropped because the transmission of the (possibly translated) message to a proxy target failed in a manner (other than a time-out) such that no Response Class PDU (such as a Response-PDU) could be returned.
.1.3.6.1.2.1.14,OSPF-MIB::ospf,,,,,,The MIB module to describe the OSPF Version 2 Protocol. Note that some objects in this MIB module may pose a significant security risk. Refer to the Security Considerations section in RFC 4750 for more information. Copyright (C) The IETF Trust (2006). This version of this MIB module is part of RFC 4750; see the RFC itself for full legal notices.
.1.3.6.1.2.1.14.1,OSPF-MIB::ospfGeneralGroup,,,,,,
.1.3.6.1.2.1.14.1.1,OSPF-MIB::ospfRouterId,IpAddress,read-write,,current,,A 32-bit integer uniquely identifying the router in the Autonomous System. By convention, to ensure uniqueness, this should default to the value of one of the router's IP interface addresses. This object is persistent and when written the entity SHOULD save the change to non-volatile storage.
.1.3.6.1.2.1.14.1.2,OSPF-MIB::ospfAdminStat,INTEGER,read-write,,current,enabled(1):disabled(2),The administrative status of OSPF in the router. The value 'enabled' denotes that the OSPF Process is active on at least one interface; 'disabled' disables it on all interfaces. This object is persistent and when written the entity SHOULD save the change to non-volatile storage.
.1.3.6.1.2.1.14.1.3,OSPF-MIB::ospfVersionNumber,INTEGER,read-only,,current,version2(2),The current version number of the OSPF protocol is 2.
.1.3.6.1.2.1.14.1.4,OSPF-MIB::ospfAreaBdrRtrStatus,INTEGER,read-only,,current,true(1):false(2),A flag to note whether this router is an Area Border Router.
.1.3.6.1.2.1.14.1.5,OSPF-MIB::ospfASBdrRtrStatus,INTEGER,read-write,,current,true(1):false(2),A flag to note whether this router is configured as an Autonomous System Border Router. This object is persistent and when written the entity SHOULD save the change to non-volatile storage.
.1.3.6.1.2.1.14.1.6,OSPF-MIB::ospfExternLsaCount,Gauge32,read-only,,current,,The number of external (LS type-5) link state advertisements in the link state database.
.1.3.6.1.2.1.14.1.7,OSPF-MIB::ospfExternLsaCksumSum,Integer32,read-only,,current,,The 32-bit sum of the LS checksums of the external link state advertisements contained in the link state database. This sum can be used to determine if there has been a change in a router's link state database and to compare the link state database of two routers. The value should be treated as unsigned when comparing two sums of checksums.
.1.3.6.1.2.1.14.1.8,OSPF-MIB::ospfTOSSupport,INTEGER,read-write,,current,true(1):false(2),The router's support for type-of-service routing. This object is persistent and when written the entity SHOULD save the change to non-volatile storage.
.1.3.6.1.2.1.14.1.9,OSPF-MIB::ospfOriginateNewLsas,Counter32,read-only,,current,,The number of new link state advertisements that have been originated. This number is incremented each time the router originates a new LSA. Discontinuities in the value of this counter can occur at re-initialization of the management system, and at other times as indicated by the value of ospfDiscontinuityTime.
.1.3.6.1.2.1.14.1.10,OSPF-MIB::ospfRxNewLsas,Counter32,read-only,,current,,The number of link state advertisements received that are determined to be new instantiations. This number does not include newer instantiations of self-originated link state advertisements. Discontinuities in the value of this counter can occur at re-initialization of the management system, and at other times as indicated by the value of ospfDiscontinuityTime.
.1.3.6.1.2.1.14.1.11,OSPF-MIB::ospfExtLsdbLimit,Integer32,read-write,,current,,The maximum number of non-default AS-external LSAs entries that can be stored in the link state database. If the value is -1, then there is no limit. When the number of non-default AS-external LSAs in a router's link state database reaches ospfExtLsdbLimit, the router enters overflow state. The router never holds more than ospfExtLsdbLimit non-default AS-external LSAs in its database. OspfExtLsdbLimit MUST be set identically in all routers attached to the OSPF backbone and/or any regular OSPF area (i.e., OSPF stub areas and NSSAs are excluded). This object is persistent and when written the entity SHOULD save the change to non-volatile storage.
.1.3.6.1.2.1.14.1.12,OSPF-MIB::ospfMulticastExtensions,Integer32,read-write,,current,,A bit mask indicating whether the router is forwarding IP multicast (Class D) datagrams based on the algorithms defined in the multicast extensions to OSPF. Bit 0, if set, indicates that the router can forward IP multicast datagrams in the router's directly attached areas (called intra-area multicast routing). Bit 1, if set, indicates that the router can forward IP multicast datagrams between OSPF areas (called inter-area multicast routing). Bit 2, if set, indicates that the router can forward IP multicast datagrams between Autonomous Systems (called inter-AS multicast routing). Only certain combinations of bit settings are allowed, namely: 0 (no multicast forwarding is enabled), 1 (intra-area multicasting only), 3 (intra-area and inter-area multicasting), 5 (intra-area and inter-AS multicasting), and 7 (multicasting everywhere). By default, no multicast forwarding is enabled. This object is persistent and when written the entity SHOULD save the change to non-volatile storage.
.1.3.6.1.2.1.14.1.13,OSPF-MIB::ospfExitOverflowInterval,Integer32,read-write,,current,,The number of seconds that, after entering OverflowState, a router will attempt to leave OverflowState. This allows the router to again originate non-default AS-external LSAs. When set to 0, the router will not leave overflow state until restarted. This object is persistent and when written the entity SHOULD save the change to non-volatile storage.
.1.3.6.1.2.1.14.1.14,OSPF-MIB::ospfDemandExtensions,INTEGER,read-write,,current,true(1):false(2),The router's support for demand routing. This object is persistent and when written the entity SHOULD save the change to non-volatile storage.
.1.3.6.1.2.1.14.1.15,OSPF-MIB::ospfRFC1583Compatibility,INTEGER,read-write,,current,true(1):false(2),Indicates metrics used to choose among multiple AS-external LSAs. When RFC1583Compatibility is set to enabled, only cost will be used when choosing among multiple AS-external LSAs advertising the same destination. When RFC1583Compatibility is set to disabled, preference will be driven first by type of path using cost only to break ties. This object is persistent and when written the entity SHOULD save the change to non-volatile storage.
.1.3.6.1.2.1.14.1.16,OSPF-MIB::ospfOpaqueLsaSupport,INTEGER,read-only,,current,true(1):false(2),The router's support for Opaque LSA types.
.1.3.6.1.2.1.14.1.17,OSPF-MIB::ospfReferenceBandwidth,Unsigned32,read-write,,current,,Reference bandwidth in kilobits/second for calculating default interface metrics. The default value is 100,000 KBPS (100 MBPS). This object is persistent and when written the entity SHOULD save the change to non-volatile storage.
.1.3.6.1.2.1.14.1.18,OSPF-MIB::ospfRestartSupport,INTEGER,read-write,,current,none(1):plannedOnly(2):plannedAndUnplanned(3),The router's support for OSPF graceful restart. Options include: no restart support, only planned restarts, or both planned and unplanned restarts. This object is persistent and when written the entity SHOULD save the change to non-volatile storage.
.1.3.6.1.2.1.14.1.19,OSPF-MIB::ospfRestartInterval,Integer32,read-write,,current,,Configured OSPF graceful restart timeout interval. This object is persistent and when written the entity SHOULD save the change to non-volatile storage.
.1.3.6.1.2.1.14.1.20,OSPF-MIB::ospfRestartStrictLsaChecking,INTEGER,read-write,,current,true(1):false(2),Indicates if strict LSA checking is enabled for graceful restart. This object is persistent and when written the entity SHOULD save the change to non-volatile storage.
.1.3.6.1.2.1.14.1.21,OSPF-MIB::ospfRestartStatus,INTEGER,read-only,,current,notRestarting(1):plannedRestart(2):unplannedRestart(3),Current status of OSPF graceful restart.
.1.3.6.1.2.1.14.1.22,OSPF-MIB::ospfRestartAge,Unsigned32,read-only,,current,,Remaining time in current OSPF graceful restart interval.
.1.3.6.1.2.1.14.1.23,OSPF-MIB::ospfRestartExitReason,INTEGER,read-only,,current,none(1):inProgress(2):completed(3):timedOut(4):topologyChanged(5),Describes the outcome of the last attempt at a graceful restart. If the value is 'none', no restart has yet been attempted. If the value is 'inProgress', a restart attempt is currently underway.
.1.3.6.1.2.1.14.1.24,OSPF-MIB::ospfAsLsaCount,Gauge32,read-only,,current,,The number of AS-scope link state advertisements in the AS-scope link state database.
.1.3.6.1.2.1.14.1.25,OSPF-MIB::ospfAsLsaCksumSum,Unsigned32,read-only,,current,,The 32-bit unsigned sum of the LS checksums of the AS link state advertisements contained in the AS-scope link state database. This sum can be used to determine if there has been a change in a router's AS-scope link state database, and to compare the AS-scope link state database of two routers.
.1.3.6.1.2.1.14.1.26,OSPF-MIB::ospfStubRouterSupport,INTEGER,read-only,,current,true(1):false(2),The router's support for stub router functionality.
.1.3.6.1.2.1.14.1.27,OSPF-MIB::ospfStubRouterAdvertisement,INTEGER,read-write,,current,doNotAdvertise(1):advertise(2),This object controls the advertisement of stub router LSAs by the router. The value doNotAdvertise will result in the advertisement of a standard router LSA and is the default value. This object is persistent and when written the entity SHOULD save the change to non-volatile storage.
.1.3.6.1.2.1.14.1.28,OSPF-MIB::ospfDiscontinuityTime,TimeTicks,read-only,,current,,The value of sysUpTime on the most recent occasion at which any one of this MIB's counters suffered a discontinuity. If no such discontinuities have occurred since the last re-initialization of the local management subsystem, then this object contains a zero value.
.1.3.6.1.2.1.14.2,OSPF-MIB::ospfAreaTable,,not-accessible,,current,,Information describing the configured parameters and cumulative statistics of the router's attached areas. The interfaces and virtual links are configured as part of these areas. Area 0.0.0.0, by definition, is the backbone area.
.1.3.6.1.2.1.14.2.1,OSPF-MIB::ospfAreaEntry,,not-accessible,ospfAreaId,current,,Information describing the configured parameters and cumulative statistics of one of the router's attached areas. The interfaces and virtual links are configured as part of these areas. Area 0.0.0.0, by definition, is the backbone area. Information in this table is persistent and when this object is written the entity SHOULD save the change to non-volatile storage.
.1.3.6.1.2.1.14.2.1.1,OSPF-MIB::ospfAreaId,IpAddress,read-only,,current,,A 32-bit integer uniquely identifying an area. Area ID 0.0.0.0 is used for the OSPF backbone.
.1.3.6.1.2.1.14.2.1.2,OSPF-MIB::ospfAuthType,INTEGER,read-create,,obsolete,none(0):simplePassword(1):md5(2),The authentication type specified for an area.
.1.3.6.1.2.1.14.2.1.3,OSPF-MIB::ospfImportAsExtern,INTEGER,read-create,,current,importExternal(1):importNoExternal(2):importNssa(3),Indicates if an area is a stub area, NSSA, or standard area. Type-5 AS-external LSAs and type-11 Opaque LSAs are not imported into stub areas or NSSAs. NSSAs import AS-external data as type-7 LSAs
.1.3.6.1.2.1.14.2.1.4,OSPF-MIB::ospfSpfRuns,Counter32,read-only,,current,,The number of times that the intra-area route table has been calculated using this area's link state database. This is typically done using Dijkstra's algorithm. Discontinuities in the value of this counter can occur at re-initialization of the management system, and at other times as indicated by the value of ospfDiscontinuityTime.
.1.3.6.1.2.1.14.2.1.5,OSPF-MIB::ospfAreaBdrRtrCount,Gauge32,read-only,,current,,The total number of Area Border Routers reachable within this area. This is initially zero and is calculated in each Shortest Path First (SPF) pass.
.1.3.6.1.2.1.14.2.1.6,OSPF-MIB::ospfAsBdrRtrCount,Gauge32,read-only,,current,,The total number of Autonomous System Border Routers reachable within this area. This is initially zero and is calculated in each SPF pass.
.1.3.6.1.2.1.14.2.1.7,OSPF-MIB::ospfAreaLsaCount,Gauge32,read-only,,current,,The total number of link state advertisements in this area's link state database, excluding AS-external LSAs.
.1.3.6.1.2.1.14.2.1.8,OSPF-MIB::ospfAreaLsaCksumSum,Integer32,read-only,,current,,The 32-bit sum of the link state advertisements' LS checksums contained in this area's link state database. This sum excludes external (LS type-5) link state advertisements. The sum can be used to determine if there has been a change in a router's link state database, and to compare the link state database of two routers. The value should be treated as unsigned when comparing two sums of checksums.
.1.3.6.1.2.1.14.2.1.9,OSPF-MIB::ospfAreaSummary,INTEGER,read-create,,current,noAreaSummary(1):sendAreaSummary(2),The variable ospfAreaSummary controls the import of summary LSAs into stub and NSSA areas. It has no effect on other areas. If it is noAreaSummary, the router will not originate summary LSAs into the stub or NSSA area. It will rely entirely on its default route. If it is sendAreaSummary, the router will both summarize and propagate summary LSAs.
.1.3.6.1.2.1.14.2.1.10,OSPF-MIB::ospfAreaStatus,INTEGER,read-create,,current,active(1):notInService(2):notReady(3):createAndGo(4):createAndWait(5):destroy(6),This object permits management of the table by facilitating actions such as row creation, construction, and destruction. The value of this object has no effect on whether other objects in this conceptual row can be modified.
.1.3.6.1.2.1.14.2.1.11,OSPF-MIB::ospfAreaNssaTranslatorRole,INTEGER,read-create,,current,always(1):candidate(2),Indicates an NSSA border router's ability to perform NSSA translation of type-7 LSAs into type-5 LSAs.
.1.3.6.1.2.1.14.2.1.12,OSPF-MIB::ospfAreaNssaTranslatorState,INTEGER,read-only,,current,enabled(1):elected(2):disabled(3),Indicates if and how an NSSA border router is performing NSSA translation of type-7 LSAs into type-5 LSAs. When this object is set to enabled, the NSSA Border router's OspfAreaNssaExtTranslatorRole has been set to always. When this object is set to elected, a candidate NSSA Border router is Translating type-7 LSAs into type-5. When this object is set to disabled, a candidate NSSA border router is NOT translating type-7 LSAs into type-5.
.1.3.6.1.2.1.14.2.1.13,OSPF-MIB::ospfAreaNssaTranslatorStabilityInterval,Integer32,read-create,,current,,The number of seconds after an elected translator determines its services are no longer required, that it should continue to perform its translation duties.
.1.3.6.1.2.1.14.2.1.14,OSPF-MIB::ospfAreaNssaTranslatorEvents,Counter32,read-only,,current,,Indicates the number of translator state changes that have occurred since the last boot-up. Discontinuities in the value of this counter can occur at re-initialization of the management system, and at other times as indicated by the value of ospfDiscontinuityTime.
.1.3.6.1.2.1.14.3,OSPF-MIB::ospfStubAreaTable,,not-accessible,,current,,The set of metrics that will be advertised by a default Area Border Router into a stub area.
.1.3.6.1.2.1.14.3.1,OSPF-MIB::ospfStubAreaEntry,,not-accessible,ospfStubAreaId:ospfStubTOS,current,,The metric for a given Type of Service that will be advertised by a default Area Border Router into a stub area. Information in this table is persistent and when this object is written the entity SHOULD save the change to non-volatile storage.
.1.3.6.1.2.1.14.3.1.1,OSPF-MIB::ospfStubAreaId,IpAddress,read-only,,current,,The 32-bit identifier for the stub area. On creation, this can be derived from the instance.
.1.3.6.1.2.1.14.3.1.2,OSPF-MIB::ospfStubTOS,Integer32,read-only,,current,,The Type of Service associated with the metric. On creation, this can be derived from the instance.
.1.3.6.1.2.1.14.3.1.3,OSPF-MIB::ospfStubMetric,Integer32,read-create,,current,,The metric value applied at the indicated Type of Service. By default, this equals the least metric at the Type of Service among the interfaces to other areas.
.1.3.6.1.2.1.14.3.1.4,OSPF-MIB::ospfStubStatus,INTEGER,read-create,,current,active(1):notInService(2):notReady(3):createAndGo(4):createAndWait(5):destroy(6),This object permits management of the table by facilitating actions such as row creation, construction, and destruction. The value of this object has no effect on whether other objects in this conceptual row can be modified.
.1.3.6.1.2.1.14.3.1.5,OSPF-MIB::ospfStubMetricType,INTEGER,read-create,,current,ospfMetric(1):comparableCost(2):nonComparable(3),This variable displays the type of metric advertised as a default route.
.1.3.6.1.2.1.14.4,OSPF-MIB::ospfLsdbTable,,not-accessible,,current,,The OSPF Process's link state database (LSDB). The LSDB contains the link state advertisements from throughout the areas that the device is attached to.
.1.3.6.1.2.1.14.4.1,OSPF-MIB::ospfLsdbEntry,,not-accessible,ospfLsdbAreaId:ospfLsdbType:ospfLsdbLsid:ospfLsdbRouterId,current,,A single link state advertisement.
.1.3.6.1.2.1.14.4.1.1,OSPF-MIB::ospfLsdbAreaId,IpAddress,read-only,,current,,The 32-bit identifier of the area from which the LSA was received.
.1.3.6.1.2.1.14.4.1.2,OSPF-MIB::ospfLsdbType,INTEGER,read-only,,current,routerLink(1):networkLink(2):summaryLink(3):asSummaryLink(4):asExternalLink(5):multicastLink(6):nssaExternalLink(7):areaOpaqueLink(10),The type of the link state advertisement. Each link state type has a separate advertisement format. Note: External link state advertisements are permitted for backward compatibility, but should be displayed in the ospfAsLsdbTable rather than here.
.1.3.6.1.2.1.14.4.1.3,OSPF-MIB::ospfLsdbLsid,IpAddress,read-only,,current,,The Link State ID is an LS Type Specific field containing either a Router ID or an IP address; it identifies the piece of the routing domain that is being described by the advertisement.
.1.3.6.1.2.1.14.4.1.4,OSPF-MIB::ospfLsdbRouterId,IpAddress,read-only,,current,,The 32-bit number that uniquely identifies the originating router in the Autonomous System.
.1.3.6.1.2.1.14.4.1.5,OSPF-MIB::ospfLsdbSequence,Integer32,read-only,,current,,The sequence number field is a signed 32-bit integer. It starts with the value '80000001'h, or -'7FFFFFFF'h, and increments until '7FFFFFFF'h. Thus, a typical sequence number will be very negative. It is used to detect old and duplicate Link State Advertisements. The space of sequence numbers is linearly ordered. The larger the sequence number, the more recent the advertisement.
.1.3.6.1.2.1.14.4.1.6,OSPF-MIB::ospfLsdbAge,Integer32,read-only,,current,,This field is the age of the link state advertisement in seconds.
.1.3.6.1.2.1.14.4.1.7,OSPF-MIB::ospfLsdbChecksum,Integer32,read-only,,current,,This field is the checksum of the complete contents of the advertisement, excepting the age field. The age field is excepted so that an advertisement's age can be incremented without updating the checksum. The checksum used is the same that is used for ISO connectionless datagrams; it is commonly referred to as the Fletcher checksum.
.1.3.6.1.2.1.14.4.1.8,OSPF-MIB::ospfLsdbAdvertisement,OCTET,read-only,,current,,The entire link state advertisement, including its header. Note that for variable length LSAs, SNMP agents may not be able to return the largest string size.
.1.3.6.1.2.1.14.5,OSPF-MIB::ospfAreaRangeTable,,not-accessible,,obsolete,,The Address Range Table acts as an adjunct to the Area Table. It describes those Address Range Summaries that are configured to be propagated from an Area to reduce the amount of information about it that is known beyond its borders. It contains a set of IP address ranges specified by an IP address/IP network mask pair. For example, class B address range of X.X.X.X with a network mask of 255.255.0.0 includes all IP addresses from X.X.0.0 to X.X.255.255. Note that this table is obsoleted and is replaced by the Area Aggregate Table.
.1.3.6.1.2.1.14.5.1,OSPF-MIB::ospfAreaRangeEntry,,not-accessible,ospfAreaRangeAreaId:ospfAreaRangeNet,obsolete,,A single area address range. Information in this table is persistent and when this object is written the entity SHOULD save the change to non-volatile storage.
.1.3.6.1.2.1.14.5.1.1,OSPF-MIB::ospfAreaRangeAreaId,IpAddress,read-only,,obsolete,,The area that the address range is to be found within.
.1.3.6.1.2.1.14.5.1.2,OSPF-MIB::ospfAreaRangeNet,IpAddress,read-only,,obsolete,,The IP address of the net or subnet indicated by the range.
.1.3.6.1.2.1.14.5.1.3,OSPF-MIB::ospfAreaRangeMask,IpAddress,read-create,,obsolete,,The subnet mask that pertains to the net or subnet.
.1.3.6.1.2.1.14.5.1.4,OSPF-MIB::ospfAreaRangeStatus,INTEGER,read-create,,obsolete,active(1):notInService(2):notReady(3):createAndGo(4):createAndWait(5):destroy(6),This object permits management of the table by facilitating actions such as row creation, construction, and destruction. The value of this object has no effect on whether other objects in this conceptual row can be modified.
.1.3.6.1.2.1.14.5.1.5,OSPF-MIB::ospfAreaRangeEffect,INTEGER,read-create,,obsolete,advertiseMatching(1):doNotAdvertiseMatching(2),Subnets subsumed by ranges either trigger the advertisement of the indicated summary (advertiseMatching) or result in the subnet's not being advertised at all outside the area.
.1.3.6.1.2.1.14.6,OSPF-MIB::ospfHostTable,,not-accessible,,current,,The Host/Metric Table indicates what hosts are directly attached to the router, what metrics and types of service should be advertised for them, and what areas they are found within.
.1.3.6.1.2.1.14.6.1,OSPF-MIB::ospfHostEntry,,not-accessible,ospfHostIpAddress:ospfHostTOS,current,,A metric to be advertised, for a given type of service, when a given host is reachable. Information in this table is persistent and when this object is written the entity SHOULD save the change to non-volatile storage.
.1.3.6.1.2.1.14.6.1.1,OSPF-MIB::ospfHostIpAddress,IpAddress,read-only,,current,,The IP address of the host.
.1.3.6.1.2.1.14.6.1.2,OSPF-MIB::ospfHostTOS,Integer32,read-only,,current,,The Type of Service of the route being configured.
.1.3.6.1.2.1.14.6.1.3,OSPF-MIB::ospfHostMetric,Integer32,read-create,,current,,The metric to be advertised.
.1.3.6.1.2.1.14.6.1.4,OSPF-MIB::ospfHostStatus,INTEGER,read-create,,current,active(1):notInService(2):notReady(3):createAndGo(4):createAndWait(5):destroy(6),This object permits management of the table by facilitating actions such as row creation, construction, and destruction. The value of this object has no effect on whether other objects in this conceptual row can be modified.
.1.3.6.1.2.1.14.6.1.5,OSPF-MIB::ospfHostAreaID,IpAddress,read-only,,deprecated,,The OSPF area to which the host belongs. Deprecated by ospfHostCfgAreaID.
.1.3.6.1.2.1.14.6.1.6,OSPF-MIB::ospfHostCfgAreaID,IpAddress,read-create,,current,,To configure the OSPF area to which the host belongs.
.1.3.6.1.2.1.14.7,OSPF-MIB::ospfIfTable,,not-accessible,,current,,The OSPF Interface Table describes the interfaces from the viewpoint of OSPF. It augments the ipAddrTable with OSPF specific information.
.1.3.6.1.2.1.14.7.1,OSPF-MIB::ospfIfEntry,,not-accessible,ospfIfIpAddress:ospfAddressLessIf,current,,The OSPF interface entry describes one interface from the viewpoint of OSPF. Information in this table is persistent and when this object is written the entity SHOULD save the change to non-volatile storage.
.1.3.6.1.2.1.14.7.1.1,OSPF-MIB::ospfIfIpAddress,IpAddress,read-only,,current,,The IP address of this OSPF interface.
.1.3.6.1.2.1.14.7.1.2,OSPF-MIB::ospfAddressLessIf,Integer32,read-only,,current,,For the purpose of easing the instancing of addressed and addressless interfaces; this variable takes the value 0 on interfaces with IP addresses and the corresponding value of ifIndex for interfaces having no IP address.
.1.3.6.1.2.1.14.7.1.3,OSPF-MIB::ospfIfAreaId,IpAddress,read-create,,current,,A 32-bit integer uniquely identifying the area to which the interface connects. Area ID 0.0.0.0 is used for the OSPF backbone.
.1.3.6.1.2.1.14.7.1.4,OSPF-MIB::ospfIfType,INTEGER,read-create,,current,broadcast(1):nbma(2):pointToPoint(3):pointToMultipoint(5),The OSPF interface type. By way of a default, this field may be intuited from the corresponding value of ifType. Broadcast LANs, such as Ethernet and IEEE 802.5, take the value 'broadcast', X.25 and similar technologies take the value 'nbma', and links that are definitively point to point take the value 'pointToPoint'.
.1.3.6.1.2.1.14.7.1.5,OSPF-MIB::ospfIfAdminStat,INTEGER,read-create,,current,enabled(1):disabled(2),The OSPF interface's administrative status. The value formed on the interface, and the interface will be advertised as an internal route to some area. The value 'disabled' denotes that the interface is external to OSPF.
.1.3.6.1.2.1.14.7.1.6,OSPF-MIB::ospfIfRtrPriority,Integer32,read-create,,current,,The priority of this interface. Used in multi-access networks, this field is used in the designated router election algorithm. The value 0 signifies that the router is not eligible to become the designated router on this particular network. In the event of a tie in this value, routers will use their Router ID as a tie breaker.
.1.3.6.1.2.1.14.7.1.7,OSPF-MIB::ospfIfTransitDelay,Integer32,read-create,,current,,The estimated number of seconds it takes to transmit a link state update packet over this interface. Note that the minimal value SHOULD be 1 second.
.1.3.6.1.2.1.14.7.1.8,OSPF-MIB::ospfIfRetransInterval,Integer32,read-create,,current,,The number of seconds between link state advertisement retransmissions, for adjacencies belonging to this interface. This value is also used when retransmitting database description and Link State request packets. Note that minimal value SHOULD be 1 second.
.1.3.6.1.2.1.14.7.1.9,OSPF-MIB::ospfIfHelloInterval,Integer32,read-create,,current,,The length of time, in seconds, between the Hello packets that the router sends on the interface. This value must be the same for all routers attached to a common network.
.1.3.6.1.2.1.14.7.1.10,OSPF-MIB::ospfIfRtrDeadInterval,Integer32,read-create,,current,,The number of seconds that a router's Hello packets have not been seen before its neighbors declare the router down. This should be some multiple of the Hello interval. This value must be the same for all routers attached to a common network.
.1.3.6.1.2.1.14.7.1.11,OSPF-MIB::ospfIfPollInterval,Integer32,read-create,,current,,The larger time interval, in seconds, between the Hello packets sent to an inactive non-broadcast multi-access neighbor.
.1.3.6.1.2.1.14.7.1.12,OSPF-MIB::ospfIfState,INTEGER,read-only,,current,down(1):loopback(2):waiting(3):pointToPoint(4):designatedRouter(5):backupDesignatedRouter(6):otherDesignatedRouter(7),The OSPF Interface State.
.1.3.6.1.2.1.14.7.1.13,OSPF-MIB::ospfIfDesignatedRouter,IpAddress,read-only,,current,,The IP address of the designated router.
.1.3.6.1.2.1.14.7.1.14,OSPF-MIB::ospfIfBackupDesignatedRouter,IpAddress,read-only,,current,,The IP address of the backup designated router.
.1.3.6.1.2.1.14.7.1.15,OSPF-MIB::ospfIfEvents,Counter32,read-only,,current,,The number of times this OSPF interface has changed its state or an error has occurred. Discontinuities in the value of this counter can occur at re-initialization of the management system, and at other times as indicated by the value of ospfDiscontinuityTime.
.1.3.6.1.2.1.14.7.1.16,OSPF-MIB::ospfIfAuthKey,OCTET,read-create,,current,,The cleartext password used as an OSPF authentication key when simplePassword security is enabled. This object does not access any OSPF cryptogaphic (e.g., MD5) authentication key under any circumstance. If the key length is shorter than 8 octets, the agent will left adjust and zero fill to 8 octets. Unauthenticated interfaces need no authentication key, and simple password authentication cannot use a key of more than 8 octets. Note that the use of simplePassword authentication is NOT recommended when there is concern regarding attack upon the OSPF system. SimplePassword authentication is only sufficient to protect against accidental misconfigurations because it re-uses cleartext passwords [RFC1704]. When read, ospfIfAuthKey always returns an octet string of length zero.
.1.3.6.1.2.1.14.7.1.17,OSPF-MIB::ospfIfStatus,INTEGER,read-create,,current,active(1):notInService(2):notReady(3):createAndGo(4):createAndWait(5):destroy(6),This object permits management of the table by facilitating actions such as row creation, construction, and destruction. The value of this object has no effect on whether other objects in this conceptual row can be modified.
.1.3.6.1.2.1.14.7.1.18,OSPF-MIB::ospfIfMulticastForwarding,INTEGER,read-create,,current,blocked(1):multicast(2):unicast(3),The way multicasts should be forwarded on this interface: not forwarded, forwarded as data link multicasts, or forwarded as data link unicasts. Data link multicasting is not meaningful on point-to-point and NBMA interfaces, and setting ospfMulticastForwarding to 0 effectively disables all multicast forwarding.
.1.3.6.1.2.1.14.7.1.19,OSPF-MIB::ospfIfDemand,INTEGER,read-create,,current,true(1):false(2),Indicates whether Demand OSPF procedures (hello suppression to FULL neighbors and setting the DoNotAge flag on propagated LSAs) should be performed on this interface.
.1.3.6.1.2.1.14.7.1.20,OSPF-MIB::ospfIfAuthType,INTEGER,read-create,,current,none(0):simplePassword(1):md5(2),The authentication type specified for an interface. Note that this object can be used to engage in significant attacks against an OSPF router.
.1.3.6.1.2.1.14.7.1.21,OSPF-MIB::ospfIfLsaCount,Gauge32,read-only,,current,,The total number of link-local link state advertisements in this interface's link-local link state database.
.1.3.6.1.2.1.14.7.1.22,OSPF-MIB::ospfIfLsaCksumSum,Unsigned32,read-only,,current,,The 32-bit unsigned sum of the Link State Advertisements' LS checksums contained in this interface's link-local link state database. The sum can be used to determine if there has been a change in the interface's link state database and to compare the interface link state database of routers attached to the same subnet.
.1.3.6.1.2.1.14.7.1.23,OSPF-MIB::ospfIfDesignatedRouterId,IpAddress,read-only,,current,,The Router ID of the designated router.
.1.3.6.1.2.1.14.7.1.24,OSPF-MIB::ospfIfBackupDesignatedRouterId,IpAddress,read-only,,current,,The Router ID of the backup designated router.
.1.3.6.1.2.1.14.8,OSPF-MIB::ospfIfMetricTable,,not-accessible,,current,,The Metric Table describes the metrics to be advertised for a specified interface at the various types of service. As such, this table is an adjunct of the OSPF Interface Table. Types of service, as defined by RFC 791, have the ability to request low delay, high bandwidth, or reliable linkage. For the purposes of this specification, the measure of bandwidth: Metric = referenceBandwidth / ifSpeed is the default value. The default reference bandwidth is 10^8. For multiple link interfaces, note that ifSpeed is the sum of the individual link speeds. This yields a number having the following typical values: Network Type/bit rate Metric >= 100 MBPS 1 Ethernet/802.3 10 E1 48 T1 (ESF) 65 64 KBPS 1562 56 KBPS 1785 19.2 KBPS 5208 9.6 KBPS 10416 Routes that are not specified use the default (TOS 0) metric. Note that the default reference bandwidth can be configured using the general group object ospfReferenceBandwidth.
.1.3.6.1.2.1.14.8.1,OSPF-MIB::ospfIfMetricEntry,,not-accessible,ospfIfMetricIpAddress:ospfIfMetricAddressLessIf:ospfIfMetricTOS,current,,A particular TOS metric for a non-virtual interface identified by the interface index. Information in this table is persistent and when this object is written the entity SHOULD save the change to non-volatile storage.
.1.3.6.1.2.1.14.8.1.1,OSPF-MIB::ospfIfMetricIpAddress,IpAddress,read-only,,current,,The IP address of this OSPF interface. On row creation, this can be derived from the instance.
.1.3.6.1.2.1.14.8.1.2,OSPF-MIB::ospfIfMetricAddressLessIf,Integer32,read-only,,current,,For the purpose of easing the instancing of addressed and addressless interfaces; this variable takes the value 0 on interfaces with IP addresses and the value of ifIndex for interfaces having no IP address. On row creation, this can be derived from the instance.
.1.3.6.1.2.1.14.8.1.3,OSPF-MIB::ospfIfMetricTOS,Integer32,read-only,,current,,The Type of Service metric being referenced. On row creation, this can be derived from the instance.
.1.3.6.1.2.1.14.8.1.4,OSPF-MIB::ospfIfMetricValue,Integer32,read-create,,current,,The metric of using this Type of Service on this interface. The default value of the TOS 0 metric is 10^8 / ifSpeed.
.1.3.6.1.2.1.14.8.1.5,OSPF-MIB::ospfIfMetricStatus,INTEGER,read-create,,current,active(1):notInService(2):notReady(3):createAndGo(4):createAndWait(5):destroy(6),This object permits management of the table by facilitating actions such as row creation, construction, and destruction. The value of this object has no effect on whether other objects in this conceptual row can be modified.
.1.3.6.1.2.1.14.9,OSPF-MIB::ospfVirtIfTable,,not-accessible,,current,,Information about this router's virtual interfaces that the OSPF Process is configured to carry on.
.1.3.6.1.2.1.14.9.1,OSPF-MIB::ospfVirtIfEntry,,not-accessible,ospfVirtIfAreaId:ospfVirtIfNeighbor,current,,Information about a single virtual interface. Information in this table is persistent and when this object is written the entity SHOULD save the change to non-volatile storage.
.1.3.6.1.2.1.14.9.1.1,OSPF-MIB::ospfVirtIfAreaId,IpAddress,read-only,,current,,The transit area that the virtual link traverses. By definition, this is not 0.0.0.0.
.1.3.6.1.2.1.14.9.1.2,OSPF-MIB::ospfVirtIfNeighbor,IpAddress,read-only,,current,,The Router ID of the virtual neighbor.
.1.3.6.1.2.1.14.9.1.3,OSPF-MIB::ospfVirtIfTransitDelay,Integer32,read-create,,current,,The estimated number of seconds it takes to transmit a Link State update packet over this interface. Note that the minimal value SHOULD be 1 second.
.1.3.6.1.2.1.14.9.1.4,OSPF-MIB::ospfVirtIfRetransInterval,Integer32,read-create,,current,,The number of seconds between link state avertisement retransmissions, for adjacencies belonging to this interface. This value is also used when retransmitting database description and Link State request packets. This value should be well over the expected round-trip time. Note that the minimal value SHOULD be 1 second.
.1.3.6.1.2.1.14.9.1.5,OSPF-MIB::ospfVirtIfHelloInterval,Integer32,read-create,,current,,The length of time, in seconds, between the Hello packets that the router sends on the interface. This value must be the same for the virtual neighbor.
.1.3.6.1.2.1.14.9.1.6,OSPF-MIB::ospfVirtIfRtrDeadInterval,Integer32,read-create,,current,,The number of seconds that a router's Hello packets have not been seen before its neighbors declare the router down. This should be some multiple of the Hello interval. This value must be the same for the virtual neighbor.
.1.3.6.1.2.1.14.9.1.7,OSPF-MIB::ospfVirtIfState,INTEGER,read-only,,current,down(1):pointToPoint(4),OSPF virtual interface states.
.1.3.6.1.2.1.14.9.1.8,OSPF-MIB::ospfVirtIfEvents,Counter32,read-only,,current,,The number of state changes or error events on this virtual link. Discontinuities in the value of this counter can occur at re-initialization of the management system, and at other times as indicated by the value of ospfDiscontinuityTime.
.1.3.6.1.2.1.14.9.1.9,OSPF-MIB::ospfVirtIfAuthKey,OCTET,read-create,,current,,The cleartext password used as an OSPF authentication key when simplePassword security is enabled. This object does not access any OSPF cryptogaphic (e.g., MD5) authentication key under any circumstance. If the key length is shorter than 8 octets, the agent will left adjust and zero fill to 8 octets. Unauthenticated interfaces need no authentication key, and simple password authentication cannot use a key of more than 8 octets. Note that the use of simplePassword authentication is NOT recommended when there is concern regarding attack upon the OSPF system. SimplePassword authentication is only sufficient to protect against accidental misconfigurations because it re-uses cleartext passwords. [RFC1704] When read, ospfIfAuthKey always returns an octet string of length zero.
.1.3.6.1.2.1.14.9.1.10,OSPF-MIB::ospfVirtIfStatus,INTEGER,read-create,,current,active(1):notInService(2):notReady(3):createAndGo(4):createAndWait(5):destroy(6),This object permits management of the table by facilitating actions such as row creation, construction, and destruction. The value of this object has no effect on whether other objects in this conceptual row can be modified.
.1.3.6.1.2.1.14.9.1.11,OSPF-MIB::ospfVirtIfAuthType,INTEGER,read-create,,current,none(0):simplePassword(1):md5(2),The authentication type specified for a virtual interface. Note that this object can be used to engage in significant attacks against an OSPF router.
.1.3.6.1.2.1.14.9.1.12,OSPF-MIB::ospfVirtIfLsaCount,Gauge32,read-only,,current,,The total number of link-local link state advertisements in this virtual interface's link-local link state database.
.1.3.6.1.2.1.14.9.1.13,OSPF-MIB::ospfVirtIfLsaCksumSum,Unsigned32,read-only,,current,,The 32-bit unsigned sum of the link state advertisements' LS checksums contained in this virtual interface's link-local link state database. The sum can be used to determine if there has been a change in the virtual interface's link state database, and to compare the virtual interface link state database of the virtual neighbors.
.1.3.6.1.2.1.14.10,OSPF-MIB::ospfNbrTable,,not-accessible,,current,,A table describing all non-virtual neighbors in the locality of the OSPF router.
.1.3.6.1.2.1.14.10.1,OSPF-MIB::ospfNbrEntry,,not-accessible,ospfNbrIpAddr:ospfNbrAddressLessIndex,current,,The information regarding a single neighbor. Information in this table is persistent and when this object is written the entity SHOULD save the change to non-volatile storage.
.1.3.6.1.2.1.14.10.1.1,OSPF-MIB::ospfNbrIpAddr,IpAddress,read-only,,current,,The IP address this neighbor is using in its IP source address. Note that, on addressless links, this will not be 0.0.0.0 but the address of another of the neighbor's interfaces.
.1.3.6.1.2.1.14.10.1.2,OSPF-MIB::ospfNbrAddressLessIndex,Integer32,read-only,,current,,On an interface having an IP address, zero. On addressless interfaces, the corresponding value of ifIndex in the Internet Standard MIB. On row creation, this can be derived from the instance.
.1.3.6.1.2.1.14.10.1.3,OSPF-MIB::ospfNbrRtrId,IpAddress,read-only,,current,,A 32-bit integer (represented as a type IpAddress) uniquely identifying the neighboring router in the Autonomous System.
.1.3.6.1.2.1.14.10.1.4,OSPF-MIB::ospfNbrOptions,Integer32,read-only,,current,,A bit mask corresponding to the neighbor's options field. Bit 0, if set, indicates that the system will operate on Type of Service metrics other than TOS 0. If zero, the neighbor will ignore all metrics except the TOS 0 metric. Bit 1, if set, indicates that the associated area accepts and operates on external information; if zero, it is a stub area. Bit 2, if set, indicates that the system is capable of routing IP multicast datagrams, that is that it implements the multicast extensions to OSPF. Bit 3, if set, indicates that the associated area is an NSSA. These areas are capable of carrying type-7 external advertisements, which are translated into type-5 external advertisements at NSSA borders.
.1.3.6.1.2.1.14.10.1.5,OSPF-MIB::ospfNbrPriority,Integer32,read-create,,current,,The priority of this neighbor in the designated router election algorithm. The value 0 signifies that the neighbor is not eligible to become the designated router on this particular network.
.1.3.6.1.2.1.14.10.1.6,OSPF-MIB::ospfNbrState,INTEGER,read-only,,current,down(1):attempt(2):init(3):twoWay(4):exchangeStart(5):exchange(6):loading(7):full(8),The state of the relationship with this neighbor.
.1.3.6.1.2.1.14.10.1.7,OSPF-MIB::ospfNbrEvents,Counter32,read-only,,current,,The number of times this neighbor relationship has changed state or an error has occurred. Discontinuities in the value of this counter can occur at re-initialization of the management system, and at other times as indicated by the value of ospfDiscontinuityTime.
.1.3.6.1.2.1.14.10.1.8,OSPF-MIB::ospfNbrLsRetransQLen,Gauge32,read-only,,current,,The current length of the retransmission queue.
.1.3.6.1.2.1.14.10.1.9,OSPF-MIB::ospfNbmaNbrStatus,INTEGER,read-create,,current,active(1):notInService(2):notReady(3):createAndGo(4):createAndWait(5):destroy(6),This object permits management of the table by facilitating actions such as row creation, construction, and destruction. The value of this object has no effect on whether other objects in this conceptual row can be modified.
.1.3.6.1.2.1.14.10.1.10,OSPF-MIB::ospfNbmaNbrPermanence,INTEGER,read-only,,current,dynamic(1):permanent(2),This variable displays the status of the entry; 'dynamic' and 'permanent' refer to how the neighbor became known.
.1.3.6.1.2.1.14.10.1.11,OSPF-MIB::ospfNbrHelloSuppressed,INTEGER,read-only,,current,true(1):false(2),Indicates whether Hellos are being suppressed to the neighbor.
.1.3.6.1.2.1.14.10.1.12,OSPF-MIB::ospfNbrRestartHelperStatus,INTEGER,read-only,,current,notHelping(1):helping(2),Indicates whether the router is acting as a graceful restart helper for the neighbor.
.1.3.6.1.2.1.14.10.1.13,OSPF-MIB::ospfNbrRestartHelperAge,Unsigned32,read-only,,current,,Remaining time in current OSPF graceful restart interval, if the router is acting as a restart helper for the neighbor.
.1.3.6.1.2.1.14.10.1.14,OSPF-MIB::ospfNbrRestartHelperExitReason,INTEGER,read-only,,current,none(1):inProgress(2):completed(3):timedOut(4):topologyChanged(5),Describes the outcome of the last attempt at acting as a graceful restart helper for the neighbor.
.1.3.6.1.2.1.14.11,OSPF-MIB::ospfVirtNbrTable,,not-accessible,,current,,This table describes all virtual neighbors. Since virtual links are configured in the Virtual Interface Table, this table is read-only.
.1.3.6.1.2.1.14.11.1,OSPF-MIB::ospfVirtNbrEntry,,not-accessible,ospfVirtNbrArea:ospfVirtNbrRtrId,current,,Virtual neighbor information.
.1.3.6.1.2.1.14.11.1.1,OSPF-MIB::ospfVirtNbrArea,IpAddress,read-only,,current,,The Transit Area Identifier.
.1.3.6.1.2.1.14.11.1.2,OSPF-MIB::ospfVirtNbrRtrId,IpAddress,read-only,,current,,A 32-bit integer uniquely identifying the neighboring router in the Autonomous System.
.1.3.6.1.2.1.14.11.1.3,OSPF-MIB::ospfVirtNbrIpAddr,IpAddress,read-only,,current,,The IP address this virtual neighbor is using.
.1.3.6.1.2.1.14.11.1.4,OSPF-MIB::ospfVirtNbrOptions,Integer32,read-only,,current,,A bit mask corresponding to the neighbor's options field. Bit 1, if set, indicates that the system will operate on Type of Service metrics other than TOS 0. If zero, the neighbor will ignore all metrics except the TOS 0 metric. Bit 2, if set, indicates that the system is network multicast capable, i.e., that it implements OSPF multicast routing.
.1.3.6.1.2.1.14.11.1.5,OSPF-MIB::ospfVirtNbrState,INTEGER,read-only,,current,down(1):attempt(2):init(3):twoWay(4):exchangeStart(5):exchange(6):loading(7):full(8),The state of the virtual neighbor relationship.
.1.3.6.1.2.1.14.11.1.6,OSPF-MIB::ospfVirtNbrEvents,Counter32,read-only,,current,,The number of times this virtual link has changed its state or an error has occurred. Discontinuities in the value of this counter can occur at re-initialization of the management system, and at other times as indicated by the value of ospfDiscontinuityTime.
.1.3.6.1.2.1.14.11.1.7,OSPF-MIB::ospfVirtNbrLsRetransQLen,Gauge32,read-only,,current,,The current length of the retransmission queue.
.1.3.6.1.2.1.14.11.1.8,OSPF-MIB::ospfVirtNbrHelloSuppressed,INTEGER,read-only,,current,true(1):false(2),Indicates whether Hellos are being suppressed to the neighbor.
.1.3.6.1.2.1.14.11.1.9,OSPF-MIB::ospfVirtNbrRestartHelperStatus,INTEGER,read-only,,current,notHelping(1):helping(2),Indicates whether the router is acting as a graceful restart helper for the neighbor.
.1.3.6.1.2.1.14.11.1.10,OSPF-MIB::ospfVirtNbrRestartHelperAge,Unsigned32,read-only,,current,,Remaining time in current OSPF graceful restart interval, if the router is acting as a restart helper for the neighbor.
.1.3.6.1.2.1.14.11.1.11,OSPF-MIB::ospfVirtNbrRestartHelperExitReason,INTEGER,read-only,,current,none(1):inProgress(2):completed(3):timedOut(4):topologyChanged(5),Describes the outcome of the last attempt at acting as a graceful restart helper for the neighbor.
.1.3.6.1.2.1.14.12,OSPF-MIB::ospfExtLsdbTable,,not-accessible,,deprecated,,The OSPF Process's external LSA link state database. This table is identical to the OSPF LSDB Table in format, but contains only external link state advertisements. The purpose is to allow external LSAs to be displayed once for the router rather than once in each non-stub area. Note that external LSAs are also in the AS-scope link state database.
.1.3.6.1.2.1.14.12.1,OSPF-MIB::ospfExtLsdbEntry,,not-accessible,ospfExtLsdbType:ospfExtLsdbLsid:ospfExtLsdbRouterId,deprecated,,A single link state advertisement.
.1.3.6.1.2.1.14.12.1.1,OSPF-MIB::ospfExtLsdbType,INTEGER,read-only,,deprecated,asExternalLink(5),The type of the link state advertisement. Each link state type has a separate advertisement format.
.1.3.6.1.2.1.14.12.1.2,OSPF-MIB::ospfExtLsdbLsid,IpAddress,read-only,,deprecated,,The Link State ID is an LS Type Specific field containing either a Router ID or an IP address; it identifies the piece of the routing domain that is being described by the advertisement.
.1.3.6.1.2.1.14.12.1.3,OSPF-MIB::ospfExtLsdbRouterId,IpAddress,read-only,,deprecated,,The 32-bit number that uniquely identifies the originating router in the Autonomous System.
.1.3.6.1.2.1.14.12.1.4,OSPF-MIB::ospfExtLsdbSequence,Integer32,read-only,,deprecated,,The sequence number field is a signed 32-bit integer. It starts with the value '80000001'h, or -'7FFFFFFF'h, and increments until '7FFFFFFF'h. Thus, a typical sequence number will be very negative. It is used to detect old and duplicate link state advertisements. The space of sequence numbers is linearly ordered. The larger the sequence number, the more recent the advertisement.
.1.3.6.1.2.1.14.12.1.5,OSPF-MIB::ospfExtLsdbAge,Integer32,read-only,,deprecated,,This field is the age of the link state advertisement in seconds.
.1.3.6.1.2.1.14.12.1.6,OSPF-MIB::ospfExtLsdbChecksum,Integer32,read-only,,deprecated,,This field is the checksum of the complete contents of the advertisement, excepting the age field. The age field is excepted so that an advertisement's age can be incremented without updating the checksum. The checksum used is the same that is used for ISO connectionless datagrams; it is commonly referred to as the Fletcher checksum.
.1.3.6.1.2.1.14.12.1.7,OSPF-MIB::ospfExtLsdbAdvertisement,OCTET,read-only,,deprecated,,The entire link state advertisement, including its header.
.1.3.6.1.2.1.14.13,OSPF-MIB::ospfRouteGroup,,,,,,
.1.3.6.1.2.1.14.13.1,OSPF-MIB::ospfIntraArea,,,,,,
.1.3.6.1.2.1.14.13.2,OSPF-MIB::ospfInterArea,,,,,,
.1.3.6.1.2.1.14.13.3,OSPF-MIB::ospfExternalType1,,,,,,
.1.3.6.1.2.1.14.13.4,OSPF-MIB::ospfExternalType2,,,,,,
.1.3.6.1.2.1.14.14,OSPF-MIB::ospfAreaAggregateTable,,not-accessible,,current,,The Area Aggregate Table acts as an adjunct to the Area Table. It describes those address aggregates that are configured to be propagated from an area. Its purpose is to reduce the amount of information that is known beyond an Area's borders. It contains a set of IP address ranges specified by an IP address/IP network mask pair. For example, a class B address range of X.X.X.X with a network mask of 255.255.0.0 includes all IP addresses from X.X.0.0 to X.X.255.255. Note that if ranges are configured such that one range subsumes another range (e.g., 10.0.0.0 mask 255.0.0.0 and 10.1.0.0 mask 255.255.0.0), the most specific match is the preferred one.
.1.3.6.1.2.1.14.14.1,OSPF-MIB::ospfAreaAggregateEntry,,not-accessible,ospfAreaAggregateAreaID:ospfAreaAggregateLsdbType:ospfAreaAggregateNet:ospfAreaAggregateMask,current,,A single area aggregate entry. Information in this table is persistent and when this object is written the entity SHOULD save the change to non-volatile storage.
.1.3.6.1.2.1.14.14.1.1,OSPF-MIB::ospfAreaAggregateAreaID,IpAddress,read-only,,current,,The area within which the address aggregate is to be found.
.1.3.6.1.2.1.14.14.1.2,OSPF-MIB::ospfAreaAggregateLsdbType,INTEGER,read-only,,current,summaryLink(3):nssaExternalLink(7),The type of the address aggregate. This field specifies the Lsdb type that this address aggregate applies to.
.1.3.6.1.2.1.14.14.1.3,OSPF-MIB::ospfAreaAggregateNet,IpAddress,read-only,,current,,The IP address of the net or subnet indicated by the range.
.1.3.6.1.2.1.14.14.1.4,OSPF-MIB::ospfAreaAggregateMask,IpAddress,read-only,,current,,The subnet mask that pertains to the net or subnet.
.1.3.6.1.2.1.14.14.1.5,OSPF-MIB::ospfAreaAggregateStatus,INTEGER,read-create,,current,active(1):notInService(2):notReady(3):createAndGo(4):createAndWait(5):destroy(6),This object permits management of the table by facilitating actions such as row creation, construction, and destruction. The value of this object has no effect on whether other objects in this conceptual row can be modified.
.1.3.6.1.2.1.14.14.1.6,OSPF-MIB::ospfAreaAggregateEffect,INTEGER,read-create,,current,advertiseMatching(1):doNotAdvertiseMatching(2),Subnets subsumed by ranges either trigger the advertisement of the indicated aggregate (advertiseMatching) or result in the subnet's not being advertised at all outside the area.
.1.3.6.1.2.1.14.14.1.7,OSPF-MIB::ospfAreaAggregateExtRouteTag,Unsigned32,read-create,,current,,External route tag to be included in NSSA (type-7) LSAs.
.1.3.6.1.2.1.14.15,OSPF-MIB::ospfConformance,,,,,,
.1.3.6.1.2.1.14.15.1,OSPF-MIB::ospfGroups,,,,,,
.1.3.6.1.2.1.14.15.1.1,OSPF-MIB::ospfBasicGroup,,,,,,These objects are used to monitor/manage global OSPF parameters. This object group conforms to RFC 1850.
.1.3.6.1.2.1.14.15.1.2,OSPF-MIB::ospfAreaGroup,,,,,,These objects are used for OSPF systems supporting areas per RFC 1850.
.1.3.6.1.2.1.14.15.1.3,OSPF-MIB::ospfStubAreaGroup,,,,,,These objects are used for OSPF systems supporting stub areas.
.1.3.6.1.2.1.14.15.1.4,OSPF-MIB::ospfLsdbGroup,,,,,,These objects are used for OSPF systems that display their link state database.
.1.3.6.1.2.1.14.15.1.5,OSPF-MIB::ospfAreaRangeGroup,,,,,,These objects are used for non-CIDR OSPF systems that support multiple areas. This object group is obsolete.
.1.3.6.1.2.1.14.15.1.6,OSPF-MIB::ospfHostGroup,,,,,,These objects are used for OSPF systems that support attached hosts.
.1.3.6.1.2.1.14.15.1.7,OSPF-MIB::ospfIfGroup,,,,,,These objects are used to monitor/manage OSPF interfaces. This object group conforms to RFC 1850.
.1.3.6.1.2.1.14.15.1.8,OSPF-MIB::ospfIfMetricGroup,,,,,,These objects are used for OSPF systems for supporting interface metrics.
.1.3.6.1.2.1.14.15.1.9,OSPF-MIB::ospfVirtIfGroup,,,,,,These objects are used for OSPF systems for supporting virtual interfaces. This object group conforms to RFC 1850.
.1.3.6.1.2.1.14.15.1.10,OSPF-MIB::ospfNbrGroup,,,,,,These objects are used to monitor/manage OSPF neighbors. This object group conforms to RFC 1850.
.1.3.6.1.2.1.14.15.1.11,OSPF-MIB::ospfVirtNbrGroup,,,,,,These objects are used to monitor/manage OSPF virtual neighbors. This object group conforms to RFC 1850.
.1.3.6.1.2.1.14.15.1.12,OSPF-MIB::ospfExtLsdbGroup,,,,,,These objects are used for OSPF systems that display their link state database. This object group conforms to RFC 1850. This object group is replaced by the ospfAsLsdbGroup in order to support any AS-scope LSA type in a single table.
.1.3.6.1.2.1.14.15.1.13,OSPF-MIB::ospfAreaAggregateGroup,,,,,,These objects are used for OSPF systems to support network prefix aggregation across areas.
.1.3.6.1.2.1.14.15.1.14,OSPF-MIB::ospfLocalLsdbGroup,,,,,,These objects are used for OSPF systems that display their link-local link state databases for non-virtual links.
.1.3.6.1.2.1.14.15.1.15,OSPF-MIB::ospfVirtLocalLsdbGroup,,,,,,These objects are used for OSPF systems that display their link-local link state databases for virtual links.
.1.3.6.1.2.1.14.15.1.16,OSPF-MIB::ospfAsLsdbGroup,,,,,,These objects are used for OSPF systems that display their AS-scope link state database.
.1.3.6.1.2.1.14.15.1.17,OSPF-MIB::ospfBasicGroup2,,,,,,These objects are used to monitor/manage OSPF global parameters.
.1.3.6.1.2.1.14.15.1.18,OSPF-MIB::ospfAreaGroup2,,,,,,These objects are used by OSPF systems to support areas.
.1.3.6.1.2.1.14.15.1.19,OSPF-MIB::ospfIfGroup2,,,,,,These objects are used to monitor/manage OSPF interfaces.
.1.3.6.1.2.1.14.15.1.20,OSPF-MIB::ospfVirtIfGroup2,,,,,,These objects are used to monitor/manage OSPF virtual interfaces.
.1.3.6.1.2.1.14.15.1.21,OSPF-MIB::ospfNbrGroup2,,,,,,These objects are used to monitor/manage OSPF neighbors.
.1.3.6.1.2.1.14.15.1.22,OSPF-MIB::ospfVirtNbrGroup2,,,,,,These objects are used to monitor/manage OSPF virtual neighbors.
.1.3.6.1.2.1.14.15.1.23,OSPF-MIB::ospfAreaAggregateGroup2,,,,,,These objects are used for OSPF systems to support network prefix aggregation across areas.
.1.3.6.1.2.1.14.15.1.24,OSPF-MIB::ospfAreaLsaCountGroup,,,,,,These objects are used for OSPF systems that display per-area, per-LSA-type counters.
.1.3.6.1.2.1.14.15.1.25,OSPF-MIB::ospfHostGroup2,,,,,,These objects are used for OSPF systems that support attached hosts.
.1.3.6.1.2.1.14.15.1.26,OSPF-MIB::ospfObsoleteGroup,,,,,,These objects are obsolete and are no longer required for OSPF systems. They are placed into this group for SMI conformance.
.1.3.6.1.2.1.14.15.2,OSPF-MIB::ospfCompliances,,,,,,
.1.3.6.1.2.1.14.15.2.1,OSPF-MIB::ospfCompliance,,,,,,The compliance statement for OSPF systems conforming to RFC 1850.
.1.3.6.1.2.1.14.15.2.2,OSPF-MIB::ospfCompliance2,,,,,,The compliance statement.
.1.3.6.1.2.1.14.15.2.3,OSPF-MIB::ospfComplianceObsolete,,,,,,Contains obsolete object groups.
.1.3.6.1.2.1.14.17,OSPF-MIB::ospfLocalLsdbTable,,not-accessible,,current,,The OSPF Process's link-local link state database for non-virtual links. This table is identical to the OSPF LSDB Table in format, but contains only link-local Link State Advertisements for non-virtual links. The purpose is to allow link-local LSAs to be displayed for each non-virtual interface. This table is implemented to support type-9 LSAs that are defined in 'The OSPF Opaque LSA Option'.
.1.3.6.1.2.1.14.17.1,OSPF-MIB::ospfLocalLsdbEntry,,not-accessible,ospfLocalLsdbIpAddress:ospfLocalLsdbAddressLessIf:ospfLocalLsdbType:ospfLocalLsdbLsid:ospfLocalLsdbRouterId,current,,A single link state advertisement.
.1.3.6.1.2.1.14.17.1.1,OSPF-MIB::ospfLocalLsdbIpAddress,IpAddress,not-accessible,,current,,The IP address of the interface from which the LSA was received if the interface is numbered.
.1.3.6.1.2.1.14.17.1.2,OSPF-MIB::ospfLocalLsdbAddressLessIf,Integer32,not-accessible,,current,,The interface index of the interface from which the LSA was received if the interface is unnumbered.
.1.3.6.1.2.1.14.17.1.3,OSPF-MIB::ospfLocalLsdbType,INTEGER,not-accessible,,current,localOpaqueLink(9),The type of the link state advertisement. Each link state type has a separate advertisement format.
.1.3.6.1.2.1.14.17.1.4,OSPF-MIB::ospfLocalLsdbLsid,IpAddress,not-accessible,,current,,The Link State ID is an LS Type Specific field containing a 32-bit identifier in IP address format; it identifies the piece of the routing domain that is being described by the advertisement.
.1.3.6.1.2.1.14.17.1.5,OSPF-MIB::ospfLocalLsdbRouterId,IpAddress,not-accessible,,current,,The 32-bit number that uniquely identifies the originating router in the Autonomous System.
.1.3.6.1.2.1.14.17.1.6,OSPF-MIB::ospfLocalLsdbSequence,Integer32,read-only,,current,,The sequence number field is a signed 32-bit integer. It starts with the value '80000001'h, or -'7FFFFFFF'h, and increments until '7FFFFFFF'h. Thus, a typical sequence number will be very negative. It is used to detect old and duplicate link state advertisements. The space of sequence numbers is linearly ordered. The larger the sequence number, the more recent the advertisement.
.1.3.6.1.2.1.14.17.1.7,OSPF-MIB::ospfLocalLsdbAge,Integer32,read-only,,current,,This field is the age of the link state advertisement in seconds.
.1.3.6.1.2.1.14.17.1.8,OSPF-MIB::ospfLocalLsdbChecksum,Integer32,read-only,,current,,This field is the checksum of the complete contents of the advertisement, excepting the age field. The age field is excepted so that an advertisement's age can be incremented without updating the checksum. The checksum used is the same that is used for ISO connectionless datagrams; it is commonly referred to as the Fletcher checksum.
.1.3.6.1.2.1.14.17.1.9,OSPF-MIB::ospfLocalLsdbAdvertisement,OCTET,read-only,,current,,The entire link state advertisement, including its header. Note that for variable length LSAs, SNMP agents may not be able to return the largest string size.
.1.3.6.1.2.1.14.18,OSPF-MIB::ospfVirtLocalLsdbTable,,not-accessible,,current,,The OSPF Process's link-local link state database for virtual links. This table is identical to the OSPF LSDB Table in format, but contains only link-local Link State Advertisements for virtual links. The purpose is to allow link-local LSAs to be displayed for each virtual interface. This table is implemented to support type-9 LSAs that are defined in 'The OSPF Opaque LSA Option'.
.1.3.6.1.2.1.14.18.1,OSPF-MIB::ospfVirtLocalLsdbEntry,,not-accessible,ospfVirtLocalLsdbTransitArea:ospfVirtLocalLsdbNeighbor:ospfVirtLocalLsdbType:ospfVirtLocalLsdbLsid:ospfVirtLocalLsdbRouterId,current,,A single link state advertisement.
.1.3.6.1.2.1.14.18.1.1,OSPF-MIB::ospfVirtLocalLsdbTransitArea,IpAddress,not-accessible,,current,,The transit area that the virtual link traverses. By definition, this is not 0.0.0.0.
.1.3.6.1.2.1.14.18.1.2,OSPF-MIB::ospfVirtLocalLsdbNeighbor,IpAddress,not-accessible,,current,,The Router ID of the virtual neighbor.
.1.3.6.1.2.1.14.18.1.3,OSPF-MIB::ospfVirtLocalLsdbType,INTEGER,not-accessible,,current,localOpaqueLink(9),The type of the link state advertisement. Each link state type has a separate advertisement format.
.1.3.6.1.2.1.14.18.1.4,OSPF-MIB::ospfVirtLocalLsdbLsid,IpAddress,not-accessible,,current,,The Link State ID is an LS Type Specific field containing a 32-bit identifier in IP address format; it identifies the piece of the routing domain that is being described by the advertisement.
.1.3.6.1.2.1.14.18.1.5,OSPF-MIB::ospfVirtLocalLsdbRouterId,IpAddress,not-accessible,,current,,The 32-bit number that uniquely identifies the originating router in the Autonomous System.
.1.3.6.1.2.1.14.18.1.6,OSPF-MIB::ospfVirtLocalLsdbSequence,Integer32,read-only,,current,,The sequence number field is a signed 32-bit integer. It starts with the value '80000001'h, or -'7FFFFFFF'h, and increments until '7FFFFFFF'h. Thus, a typical sequence number will be very negative. It is used to detect old and duplicate link state advertisements. The space of sequence numbers is linearly ordered. The larger the sequence number, the more recent the advertisement.
.1.3.6.1.2.1.14.18.1.7,OSPF-MIB::ospfVirtLocalLsdbAge,Integer32,read-only,,current,,This field is the age of the link state advertisement in seconds.
.1.3.6.1.2.1.14.18.1.8,OSPF-MIB::ospfVirtLocalLsdbChecksum,Integer32,read-only,,current,,This field is the checksum of the complete contents of the advertisement, excepting the age field. The age field is excepted so that an advertisement's age can be incremented without updating the checksum. The checksum used is the same that is used for ISO connectionless datagrams; it is commonly referred to as the Fletcher checksum.
.1.3.6.1.2.1.14.18.1.9,OSPF-MIB::ospfVirtLocalLsdbAdvertisement,OCTET,read-only,,current,,The entire link state advertisement, including its header.
.1.3.6.1.2.1.14.19,OSPF-MIB::ospfAsLsdbTable,,not-accessible,,current,,The OSPF Process's AS-scope LSA link state database. The database contains the AS-scope Link State Advertisements from throughout the areas that the device is attached to. This table is identical to the OSPF LSDB Table in format, but contains only AS-scope Link State Advertisements. The purpose is to allow AS-scope LSAs to be displayed once for the router rather than once in each non-stub area.
.1.3.6.1.2.1.14.19.1,OSPF-MIB::ospfAsLsdbEntry,,not-accessible,ospfAsLsdbType:ospfAsLsdbLsid:ospfAsLsdbRouterId,current,,A single link state advertisement.
.1.3.6.1.2.1.14.19.1.1,OSPF-MIB::ospfAsLsdbType,INTEGER,not-accessible,,current,asExternalLink(5):asOpaqueLink(11),The type of the link state advertisement. Each link state type has a separate advertisement format.
.1.3.6.1.2.1.14.19.1.2,OSPF-MIB::ospfAsLsdbLsid,IpAddress,not-accessible,,current,,The Link State ID is an LS Type Specific field containing either a Router ID or an IP address; it identifies the piece of the routing domain that is being described by the advertisement.
.1.3.6.1.2.1.14.19.1.3,OSPF-MIB::ospfAsLsdbRouterId,IpAddress,not-accessible,,current,,The 32-bit number that uniquely identifies the originating router in the Autonomous System.
.1.3.6.1.2.1.14.19.1.4,OSPF-MIB::ospfAsLsdbSequence,Integer32,read-only,,current,,The sequence number field is a signed 32-bit integer. It starts with the value '80000001'h, or -'7FFFFFFF'h, and increments until '7FFFFFFF'h. Thus, a typical sequence number will be very negative. It is used to detect old and duplicate link state advertisements. The space of sequence numbers is linearly ordered. The larger the sequence number, the more recent the advertisement.
.1.3.6.1.2.1.14.19.1.5,OSPF-MIB::ospfAsLsdbAge,Integer32,read-only,,current,,This field is the age of the link state advertisement in seconds.
.1.3.6.1.2.1.14.19.1.6,OSPF-MIB::ospfAsLsdbChecksum,Integer32,read-only,,current,,This field is the checksum of the complete contents of the advertisement, excepting the age field. The age field is excepted so that an advertisement's age can be incremented without updating the checksum. The checksum used is the same that is used for ISO connectionless datagrams; it is commonly referred to as the Fletcher checksum.
.1.3.6.1.2.1.14.19.1.7,OSPF-MIB::ospfAsLsdbAdvertisement,OCTET,read-only,,current,,The entire link state advertisement, including its header.
.1.3.6.1.2.1.14.20,OSPF-MIB::ospfAreaLsaCountTable,,not-accessible,,current,,This table maintains per-area, per-LSA-type counters
.1.3.6.1.2.1.14.20.1,OSPF-MIB::ospfAreaLsaCountEntry,,not-accessible,ospfAreaLsaCountAreaId:ospfAreaLsaCountLsaType,current,,An entry with a number of link advertisements of a given type for a given area.
.1.3.6.1.2.1.14.20.1.1,OSPF-MIB::ospfAreaLsaCountAreaId,IpAddress,not-accessible,,current,,This entry Area ID.
.1.3.6.1.2.1.14.20.1.2,OSPF-MIB::ospfAreaLsaCountLsaType,INTEGER,not-accessible,,current,routerLink(1):networkLink(2):summaryLink(3):asSummaryLink(4):multicastLink(6):nssaExternalLink(7):areaOpaqueLink(10),This entry LSA type.
.1.3.6.1.2.1.14.20.1.3,OSPF-MIB::ospfAreaLsaCountNumber,Gauge32,read-only,,current,,Number of LSAs of a given type for a given area.
.1.3.6.1.2.1.16,RMON-MIB::rmon,,,,,,
.1.3.6.1.2.1.16.0,RMON-MIB::rmonEventsV2,,,,,,Definition point for RMON notifications.
.1.3.6.1.2.1.16.0.1,RMON-MIB::risingAlarm,,,,,,The SNMP trap that is generated when an alarm entry crosses its rising threshold and generates an event that is configured for sending SNMP traps.
.1.3.6.1.2.1.16.0.2,RMON-MIB::fallingAlarm,,,,,,The SNMP trap that is generated when an alarm entry crosses its falling threshold and generates an event that is configured for sending SNMP traps.
.1.3.6.1.2.1.16.1,RMON-MIB::statistics,,,,,,
.1.3.6.1.2.1.16.1.1,RMON-MIB::etherStatsTable,,not-accessible,,current,,A list of Ethernet statistics entries.
.1.3.6.1.2.1.16.1.1.1,RMON-MIB::etherStatsEntry,,not-accessible,etherStatsIndex,current,,A collection of statistics kept for a particular Ethernet interface. As an example, an instance of the etherStatsPkts object might be named etherStatsPkts.1
.1.3.6.1.2.1.16.1.1.1.1,RMON-MIB::etherStatsIndex,Integer32,read-only,,current,,The value of this object uniquely identifies this etherStats entry.
.1.3.6.1.2.1.16.1.1.1.2,RMON-MIB::etherStatsDataSource,OBJECT,read-create,,current,,This object identifies the source of the data that this etherStats entry is configured to analyze. This source can be any ethernet interface on this device. In order to identify a particular interface, this object shall identify the instance of the ifIndex object, defined in RFC 2233 [17], for the desired interface. For example, if an entry were to receive data from interface #1, this object would be set to ifIndex.1. The statistics in this group reflect all packets on the local network segment attached to the identified interface. An agent may or may not be able to tell if fundamental changes to the media of the interface have occurred and necessitate an invalidation of this entry. For example, a hot-pluggable ethernet card could be pulled out and replaced by a token-ring card. In such a case, if the agent has such knowledge of the change, it is recommended that it invalidate this entry. This object may not be modified if the associated etherStatsStatus object is equal to valid(1).
.1.3.6.1.2.1.16.1.1.1.3,RMON-MIB::etherStatsDropEvents,Counter32,read-only,,current,,The total number of events in which packets were dropped by the probe due to lack of resources. Note that this number is not necessarily the number of packets dropped; it is just the number of times this condition has been detected.
.1.3.6.1.2.1.16.1.1.1.4,RMON-MIB::etherStatsOctets,Counter32,read-only,,current,,The total number of octets of data (including those in bad packets) received on the network (excluding framing bits but including FCS octets). This object can be used as a reasonable estimate of 10-Megabit ethernet utilization. If greater precision is desired, the etherStatsPkts and etherStatsOctets objects should be sampled before and after a common interval. The differences in the sampled values are Pkts and Octets, respectively, and the number of seconds in the interval is Interval. These values are used to calculate the Utilization as follows: Pkts * (9.6 + 6.4) + (Octets * .8) Utilization = ------------------------------------- Interval * 10,000 The result of this equation is the value Utilization which is the percent utilization of the ethernet segment on a scale of 0 to 100 percent.
.1.3.6.1.2.1.16.1.1.1.5,RMON-MIB::etherStatsPkts,Counter32,read-only,,current,,The total number of packets (including bad packets, broadcast packets, and multicast packets) received.
.1.3.6.1.2.1.16.1.1.1.6,RMON-MIB::etherStatsBroadcastPkts,Counter32,read-only,,current,,The total number of good packets received that were directed to the broadcast address. Note that this does not include multicast packets.
.1.3.6.1.2.1.16.1.1.1.7,RMON-MIB::etherStatsMulticastPkts,Counter32,read-only,,current,,The total number of good packets received that were directed to a multicast address. Note that this number does not include packets directed to the broadcast address.
.1.3.6.1.2.1.16.1.1.1.8,RMON-MIB::etherStatsCRCAlignErrors,Counter32,read-only,,current,,The total number of packets received that had a length (excluding framing bits, but including FCS octets) of between 64 and 1518 octets, inclusive, but had either a bad Frame Check Sequence (FCS) with an integral number of octets (FCS Error) or a bad FCS with a non-integral number of octets (Alignment Error).
.1.3.6.1.2.1.16.1.1.1.9,RMON-MIB::etherStatsUndersizePkts,Counter32,read-only,,current,,The total number of packets received that were less than 64 octets long (excluding framing bits, but including FCS octets) and were otherwise well formed.
.1.3.6.1.2.1.16.1.1.1.10,RMON-MIB::etherStatsOversizePkts,Counter32,read-only,,current,,The total number of packets received that were longer than 1518 octets (excluding framing bits, but including FCS octets) and were otherwise well formed.
.1.3.6.1.2.1.16.1.1.1.11,RMON-MIB::etherStatsFragments,Counter32,read-only,,current,,The total number of packets received that were less than 64 octets in length (excluding framing bits but including FCS octets) and had either a bad Frame Check Sequence (FCS) with an integral number of octets (FCS Error) or a bad FCS with a non-integral number of octets (Alignment Error). Note that it is entirely normal for etherStatsFragments to increment. This is because it counts both runts (which are normal occurrences due to collisions) and noise hits.
.1.3.6.1.2.1.16.1.1.1.12,RMON-MIB::etherStatsJabbers,Counter32,read-only,,current,,The total number of packets received that were longer than 1518 octets (excluding framing bits, but including FCS octets), and had either a bad Frame Check Sequence (FCS) with an integral number of octets (FCS Error) or a bad FCS with a non-integral number of octets (Alignment Error). Note that this definition of jabber is different than the definition in IEEE-802.3 section 8.2.1.5 (10BASE5) and section 10.3.1.4 (10BASE2). These documents define jabber as the condition where any packet exceeds 20 ms. The allowed range to detect jabber is between 20 ms and 150 ms.
.1.3.6.1.2.1.16.1.1.1.13,RMON-MIB::etherStatsCollisions,Counter32,read-only,,current,,The best estimate of the total number of collisions on this Ethernet segment. The value returned will depend on the location of the RMON probe. Section 8.2.1.3 (10BASE-5) and section 10.3.1.3 (10BASE-2) of IEEE standard 802.3 states that a station must detect a collision, in the receive mode, if three or more stations are transmitting simultaneously. A repeater port must detect a collision when two or more stations are transmitting simultaneously. Thus a probe placed on a repeater port could record more collisions than a probe connected to a station on the same segment would. Probe location plays a much smaller role when considering 10BASE-T. 14.2.1.4 (10BASE-T) of IEEE standard 802.3 defines a collision as the simultaneous presence of signals on the DO and RD circuits (transmitting and receiving at the same time). A 10BASE-T station can only detect collisions when it is transmitting. Thus probes placed on a station and a repeater, should report the same number of collisions. Note also that an RMON probe inside a repeater should ideally report collisions between the repeater and one or more other hosts (transmit collisions as defined by IEEE 802.3k) plus receiver collisions observed on any coax segments to which the repeater is connected.
.1.3.6.1.2.1.16.1.1.1.14,RMON-MIB::etherStatsPkts64Octets,Counter32,read-only,,current,,The total number of packets (including bad packets) received that were 64 octets in length (excluding framing bits but including FCS octets).
.1.3.6.1.2.1.16.1.1.1.15,RMON-MIB::etherStatsPkts65to127Octets,Counter32,read-only,,current,,The total number of packets (including bad packets) received that were between 65 and 127 octets in length inclusive (excluding framing bits but including FCS octets).
.1.3.6.1.2.1.16.1.1.1.16,RMON-MIB::etherStatsPkts128to255Octets,Counter32,read-only,,current,,The total number of packets (including bad packets) received that were between 128 and 255 octets in length inclusive (excluding framing bits but including FCS octets).
.1.3.6.1.2.1.16.1.1.1.17,RMON-MIB::etherStatsPkts256to511Octets,Counter32,read-only,,current,,The total number of packets (including bad packets) received that were between 256 and 511 octets in length inclusive (excluding framing bits but including FCS octets).
.1.3.6.1.2.1.16.1.1.1.18,RMON-MIB::etherStatsPkts512to1023Octets,Counter32,read-only,,current,,The total number of packets (including bad packets) received that were between 512 and 1023 octets in length inclusive (excluding framing bits but including FCS octets).
.1.3.6.1.2.1.16.1.1.1.19,RMON-MIB::etherStatsPkts1024to1518Octets,Counter32,read-only,,current,,The total number of packets (including bad packets) received that were between 1024 and 1518 octets in length inclusive (excluding framing bits but including FCS octets).
.1.3.6.1.2.1.16.1.1.1.20,RMON-MIB::etherStatsOwner,OCTET,read-create,,current,,The entity that configured this entry and is therefore using the resources assigned to it.
.1.3.6.1.2.1.16.1.1.1.21,RMON-MIB::etherStatsStatus,INTEGER,read-create,,current,valid(1):createRequest(2):underCreation(3):invalid(4),The status of this etherStats entry.
.1.3.6.1.2.1.16.1.2,TOKEN-RING-RMON-MIB::tokenRingMLStatsTable,,not-accessible,,mandatory,,A list of Mac-Layer Token Ring statistics entries.
.1.3.6.1.2.1.16.1.2.1,TOKEN-RING-RMON-MIB::tokenRingMLStatsEntry,,not-accessible,tokenRingMLStatsIndex,mandatory,,A collection of Mac-Layer statistics kept for a particular Token Ring interface.
.1.3.6.1.2.1.16.1.2.1.1,TOKEN-RING-RMON-MIB::tokenRingMLStatsIndex,INTEGER,read-only,,mandatory,,The value of this object uniquely identifies this tokenRingMLStats entry.
.1.3.6.1.2.1.16.1.2.1.2,TOKEN-RING-RMON-MIB::tokenRingMLStatsDataSource,OBJECT,read-write,,mandatory,,This object identifies the source of the data that this tokenRingMLStats entry is configured to analyze. This source can be any tokenRing interface on this device. In order to identify a particular interface, this object shall identify the instance of the ifIndex object, defined in MIB-II [3], for the desired interface. For example, if an entry were to receive data from interface #1, this object would be set to ifIndex.1. The statistics in this group reflect all error reports on the local network segment attached to the identified interface. This object may not be modified if the associated tokenRingMLStatsStatus object is equal to valid(1).
.1.3.6.1.2.1.16.1.2.1.3,TOKEN-RING-RMON-MIB::tokenRingMLStatsDropEvents,Counter32,read-only,,mandatory,,The total number of events in which packets were dropped by the probe due to lack of resources. Note that this number is not necessarily the number of packets dropped; it is just the number of times this condition has been detected. This value is the same as the corresponding tokenRingPStatsDropEvents.
.1.3.6.1.2.1.16.1.2.1.4,TOKEN-RING-RMON-MIB::tokenRingMLStatsMacOctets,Counter32,read-only,,mandatory,,The total number of octets of data in MAC packets (excluding those that were not good frames) received on the network (excluding framing bits but including FCS octets).
.1.3.6.1.2.1.16.1.2.1.5,TOKEN-RING-RMON-MIB::tokenRingMLStatsMacPkts,Counter32,read-only,,mandatory,,The total number of MAC packets (excluding packets that were not good frames) received.
.1.3.6.1.2.1.16.1.2.1.6,TOKEN-RING-RMON-MIB::tokenRingMLStatsRingPurgeEvents,Counter32,read-only,,mandatory,,The total number of times that the ring enters the ring purge state from normal ring state. The ring purge state that comes in response to the claim token or beacon state is not counted.
.1.3.6.1.2.1.16.1.2.1.7,TOKEN-RING-RMON-MIB::tokenRingMLStatsRingPurgePkts,Counter32,read-only,,mandatory,,The total number of ring purge MAC packets detected by probe.
.1.3.6.1.2.1.16.1.2.1.8,TOKEN-RING-RMON-MIB::tokenRingMLStatsBeaconEvents,Counter32,read-only,,mandatory,,The total number of times that the ring enters a beaconing state (beaconFrameStreamingState, beaconBitStreamingState, beaconSetRecoveryModeState, or beaconRingSignalLossState) from a non-beaconing state. Note that a change of the source address of the beacon packet does not constitute a new beacon event.
.1.3.6.1.2.1.16.1.2.1.9,TOKEN-RING-RMON-MIB::tokenRingMLStatsBeaconTime,INTEGER,read-only,,mandatory,,The total amount of time that the ring has been in the beaconing state.
.1.3.6.1.2.1.16.1.2.1.10,TOKEN-RING-RMON-MIB::tokenRingMLStatsBeaconPkts,Counter32,read-only,,mandatory,,The total number of beacon MAC packets detected by the probe.
.1.3.6.1.2.1.16.1.2.1.11,TOKEN-RING-RMON-MIB::tokenRingMLStatsClaimTokenEvents,Counter32,read-only,,mandatory,,The total number of times that the ring enters the claim token state from normal ring state or ring purge state. The claim token state that comes in response to a beacon state is not counted.
.1.3.6.1.2.1.16.1.2.1.12,TOKEN-RING-RMON-MIB::tokenRingMLStatsClaimTokenPkts,Counter32,read-only,,mandatory,,The total number of claim token MAC packets detected by the probe.
.1.3.6.1.2.1.16.1.2.1.13,TOKEN-RING-RMON-MIB::tokenRingMLStatsNAUNChanges,Counter32,read-only,,mandatory,,The total number of NAUN changes detected by the probe.
.1.3.6.1.2.1.16.1.2.1.14,TOKEN-RING-RMON-MIB::tokenRingMLStatsLineErrors,Counter32,read-only,,mandatory,,The total number of line errors reported in error reporting packets detected by the probe.
.1.3.6.1.2.1.16.1.2.1.15,TOKEN-RING-RMON-MIB::tokenRingMLStatsInternalErrors,Counter32,read-only,,mandatory,,The total number of adapter internal errors reported in error reporting packets detected by the probe.
.1.3.6.1.2.1.16.1.2.1.16,TOKEN-RING-RMON-MIB::tokenRingMLStatsBurstErrors,Counter32,read-only,,mandatory,,The total number of burst errors reported in error reporting packets detected by the probe.
.1.3.6.1.2.1.16.1.2.1.17,TOKEN-RING-RMON-MIB::tokenRingMLStatsACErrors,Counter32,read-only,,mandatory,,The total number of AC (Address Copied) errors reported in error reporting packets detected by the probe.
.1.3.6.1.2.1.16.1.2.1.18,TOKEN-RING-RMON-MIB::tokenRingMLStatsAbortErrors,Counter32,read-only,,mandatory,,The total number of abort delimiters reported in error reporting packets detected by the probe.
.1.3.6.1.2.1.16.1.2.1.19,TOKEN-RING-RMON-MIB::tokenRingMLStatsLostFrameErrors,Counter32,read-only,,mandatory,,The total number of lost frame errors reported in error reporting packets detected by the probe.
.1.3.6.1.2.1.16.1.2.1.20,TOKEN-RING-RMON-MIB::tokenRingMLStatsCongestionErrors,Counter32,read-only,,mandatory,,The total number of receive congestion errors reported in error reporting packets detected by the probe.
.1.3.6.1.2.1.16.1.2.1.21,TOKEN-RING-RMON-MIB::tokenRingMLStatsFrameCopiedErrors,Counter32,read-only,,mandatory,,The total number of frame copied errors reported in error reporting packets detected by the probe.
.1.3.6.1.2.1.16.1.2.1.22,TOKEN-RING-RMON-MIB::tokenRingMLStatsFrequencyErrors,Counter32,read-only,,mandatory,,The total number of frequency errors reported in error reporting packets detected by the probe.
.1.3.6.1.2.1.16.1.2.1.23,TOKEN-RING-RMON-MIB::tokenRingMLStatsTokenErrors,Counter32,read-only,,mandatory,,The total number of token errors reported in error reporting packets detected by the probe.
.1.3.6.1.2.1.16.1.2.1.24,TOKEN-RING-RMON-MIB::tokenRingMLStatsSoftErrorReports,Counter32,read-only,,mandatory,,The total number of soft error report frames detected by the probe.
.1.3.6.1.2.1.16.1.2.1.25,TOKEN-RING-RMON-MIB::tokenRingMLStatsRingPollEvents,Counter32,read-only,,mandatory,,The total number of ring poll events detected by the probe (i.e. the number of ring polls initiated by the active monitor that were detected).
.1.3.6.1.2.1.16.1.2.1.26,TOKEN-RING-RMON-MIB::tokenRingMLStatsOwner,OCTET,read-write,,mandatory,,The entity that configured this entry and is therefore using the resources assigned to it.
.1.3.6.1.2.1.16.1.2.1.27,TOKEN-RING-RMON-MIB::tokenRingMLStatsStatus,INTEGER,read-write,,mandatory,valid(1):createRequest(2):underCreation(3):invalid(4),The status of this tokenRingMLStats entry.
.1.3.6.1.2.1.16.1.3,TOKEN-RING-RMON-MIB::tokenRingPStatsTable,,not-accessible,,mandatory,,A list of promiscuous Token Ring statistics entries.
.1.3.6.1.2.1.16.1.3.1,TOKEN-RING-RMON-MIB::tokenRingPStatsEntry,,not-accessible,tokenRingPStatsIndex,mandatory,,A collection of promiscuous statistics kept for non-MAC packets on a particular Token Ring interface.
.1.3.6.1.2.1.16.1.3.1.1,TOKEN-RING-RMON-MIB::tokenRingPStatsIndex,INTEGER,read-only,,mandatory,,The value of this object uniquely identifies this tokenRingPStats entry.
.1.3.6.1.2.1.16.1.3.1.2,TOKEN-RING-RMON-MIB::tokenRingPStatsDataSource,OBJECT,read-write,,mandatory,,This object identifies the source of the data that this tokenRingPStats entry is configured to analyze. This source can be any tokenRing interface on this device. In order to identify a particular interface, this object shall identify the instance of the ifIndex object, defined in MIB-II [3], for the desired interface. For example, if an entry were to receive data from interface #1, this object would be set to ifIndex.1. The statistics in this group reflect all non-MAC packets on the local network segment attached to the identified interface. This object may not be modified if the associated tokenRingPStatsStatus object is equal to valid(1).
.1.3.6.1.2.1.16.1.3.1.3,TOKEN-RING-RMON-MIB::tokenRingPStatsDropEvents,Counter32,read-only,,mandatory,,The total number of events in which packets were dropped by the probe due to lack of resources. Note that this number is not necessarily the number of packets dropped; it is just the number of times this condition has been detected. This value is the same as the corresponding tokenRingMLStatsDropEvents
.1.3.6.1.2.1.16.1.3.1.4,TOKEN-RING-RMON-MIB::tokenRingPStatsDataOctets,Counter32,read-only,,mandatory,,The total number of octets of data in good frames received on the network (excluding framing bits but including FCS octets) in non-MAC packets.
.1.3.6.1.2.1.16.1.3.1.5,TOKEN-RING-RMON-MIB::tokenRingPStatsDataPkts,Counter32,read-only,,mandatory,,The total number of non-MAC packets in good frames. received.
.1.3.6.1.2.1.16.1.3.1.6,TOKEN-RING-RMON-MIB::tokenRingPStatsDataBroadcastPkts,Counter32,read-only,,mandatory,,The total number of good non-MAC frames received that were directed to an LLC broadcast address (0xFFFFFFFFFFFF or 0xC000FFFFFFFF).
.1.3.6.1.2.1.16.1.3.1.7,TOKEN-RING-RMON-MIB::tokenRingPStatsDataMulticastPkts,Counter32,read-only,,mandatory,,The total number of good non-MAC frames received that were directed to a local or global multicast or functional address. Note that this number does not include packets directed to the broadcast address.
.1.3.6.1.2.1.16.1.3.1.8,TOKEN-RING-RMON-MIB::tokenRingPStatsDataPkts18to63Octets,Counter32,read-only,,mandatory,,The total number of good non-MAC frames received that were between 18 and 63 octets in length inclusive, excluding framing bits but including FCS octets.
.1.3.6.1.2.1.16.1.3.1.9,TOKEN-RING-RMON-MIB::tokenRingPStatsDataPkts64to127Octets,Counter32,read-only,,mandatory,,The total number of good non-MAC frames received that were between 64 and 127 octets in length inclusive, excluding framing bits but including FCS octets.
.1.3.6.1.2.1.16.1.3.1.10,TOKEN-RING-RMON-MIB::tokenRingPStatsDataPkts128to255Octets,Counter32,read-only,,mandatory,,The total number of good non-MAC frames received that were between 128 and 255 octets in length inclusive, excluding framing bits but including FCS octets.
.1.3.6.1.2.1.16.1.3.1.11,TOKEN-RING-RMON-MIB::tokenRingPStatsDataPkts256to511Octets,Counter32,read-only,,mandatory,,The total number of good non-MAC frames received that were between 256 and 511 octets in length inclusive, excluding framing bits but including FCS octets.
.1.3.6.1.2.1.16.1.3.1.12,TOKEN-RING-RMON-MIB::tokenRingPStatsDataPkts512to1023Octets,Counter32,read-only,,mandatory,,The total number of good non-MAC frames received that were between 512 and 1023 octets in length inclusive, excluding framing bits but including FCS octets.
.1.3.6.1.2.1.16.1.3.1.13,TOKEN-RING-RMON-MIB::tokenRingPStatsDataPkts1024to2047Octets,Counter32,read-only,,mandatory,,The total number of good non-MAC frames received that were between 1024 and 2047 octets in length inclusive, excluding framing bits but including FCS octets.
.1.3.6.1.2.1.16.1.3.1.14,TOKEN-RING-RMON-MIB::tokenRingPStatsDataPkts2048to4095Octets,Counter32,read-only,,mandatory,,The total number of good non-MAC frames received that were between 2048 and 4095 octets in length inclusive, excluding framing bits but including FCS octets.
.1.3.6.1.2.1.16.1.3.1.15,TOKEN-RING-RMON-MIB::tokenRingPStatsDataPkts4096to8191Octets,Counter32,read-only,,mandatory,,The total number of good non-MAC frames received that were between 4096 and 8191 octets in length inclusive, excluding framing bits but including FCS octets.
.1.3.6.1.2.1.16.1.3.1.16,TOKEN-RING-RMON-MIB::tokenRingPStatsDataPkts8192to18000Octets,Counter32,read-only,,mandatory,,The total number of good non-MAC frames received that were between 8192 and 18000 octets in length inclusive, excluding framing bits but including FCS octets.
.1.3.6.1.2.1.16.1.3.1.17,TOKEN-RING-RMON-MIB::tokenRingPStatsDataPktsGreaterThan18000Octets,Counter32,read-only,,mandatory,,The total number of good non-MAC frames received that were greater than 18000 octets in length, excluding framing bits but including FCS octets.
.1.3.6.1.2.1.16.1.3.1.18,TOKEN-RING-RMON-MIB::tokenRingPStatsOwner,OCTET,read-write,,mandatory,,The entity that configured this entry and is therefore using the resources assigned to it.
.1.3.6.1.2.1.16.1.3.1.19,TOKEN-RING-RMON-MIB::tokenRingPStatsStatus,INTEGER,read-write,,mandatory,valid(1):createRequest(2):underCreation(3):invalid(4),The status of this tokenRingPStats entry.
.1.3.6.1.2.1.16.1.4,RMON2-MIB::etherStats2Table,,not-accessible,,current,,Contains the RMON-2 augmentations to RMON-1.
.1.3.6.1.2.1.16.1.4.1,RMON2-MIB::etherStats2Entry,,not-accessible,,current,,Contains the RMON-2 augmentations to RMON-1.
.1.3.6.1.2.1.16.1.4.1.1,RMON2-MIB::etherStatsDroppedFrames,Counter32,read-only,,current,,The total number of frames that were received by the probe and therefore not accounted for in the *StatsDropEvents, but that the probe chose not to count for this entry for whatever reason. Most often, this event occurs when the probe is out of some resources and decides to shed load from this collection. This count does not include packets that were not counted because they had MAC-layer errors. Note that, unlike the dropEvents counter, this number is the exact number of frames dropped.
.1.3.6.1.2.1.16.1.4.1.2,RMON2-MIB::etherStatsCreateTime,TimeTicks,read-only,,current,,The value of sysUpTime when this control entry was last activated. This can be used by the management station to ensure that the table has not been deleted and recreated between polls.
.1.3.6.1.2.1.16.1.5,RMON2-MIB::tokenRingMLStats2Table,,not-accessible,,deprecated,,Contains the RMON-2 augmentations to RMON-1. This table has been deprecated, as it has not had enough independent implementations to demonstrate interoperability to meet the requirements of a Draft Standard.
.1.3.6.1.2.1.16.1.5.1,RMON2-MIB::tokenRingMLStats2Entry,,not-accessible,,deprecated,,Contains the RMON-2 augmentations to RMON-1.
.1.3.6.1.2.1.16.1.5.1.1,RMON2-MIB::tokenRingMLStatsDroppedFrames,Counter32,read-only,,deprecated,,The total number of frames that were received by the probe and therefore not accounted for in the *StatsDropEvents, but that the probe chose not to count for this entry for whatever reason. Most often, this event occurs when the probe is out of some resources and decides to shed load from this collection. This count does not include packets that were not counted because they had MAC-layer errors. Note that, unlike the dropEvents counter, this number is the exact number of frames dropped.
.1.3.6.1.2.1.16.1.5.1.2,RMON2-MIB::tokenRingMLStatsCreateTime,TimeTicks,read-only,,deprecated,,The value of sysUpTime when this control entry was last activated. This can be used by the management station to ensure that the table has not been deleted and recreated between polls.
.1.3.6.1.2.1.16.1.6,RMON2-MIB::tokenRingPStats2Table,,not-accessible,,deprecated,,Contains the RMON-2 augmentations to RMON-1. This table has been deprecated, as it has not had enough independent implementations to demonstrate interoperability to meet the requirements of a Draft Standard.
.1.3.6.1.2.1.16.1.6.1,RMON2-MIB::tokenRingPStats2Entry,,not-accessible,,deprecated,,Contains the RMON-2 augmentations to RMON-1.
.1.3.6.1.2.1.16.1.6.1.1,RMON2-MIB::tokenRingPStatsDroppedFrames,Counter32,read-only,,deprecated,,The total number of frames that were received by the probe and therefore not accounted for in the *StatsDropEvents, but that the probe chose not to count for this entry for whatever reason. Most often, this event occurs when the probe is out of some resources and decides to shed load from this collection. This count does not include packets that were not counted because they had MAC-layer errors. Note that, unlike the dropEvents counter, this number is the exact number of frames dropped.
.1.3.6.1.2.1.16.1.6.1.2,RMON2-MIB::tokenRingPStatsCreateTime,TimeTicks,read-only,,deprecated,,The value of sysUpTime when this control entry was last activated. This can be used by the management station to ensure that the table has not been deleted and recreated between polls.
.1.3.6.1.2.1.16.2,RMON-MIB::history,,,,,,
.1.3.6.1.2.1.16.2.1,RMON-MIB::historyControlTable,,not-accessible,,current,,A list of history control entries.
.1.3.6.1.2.1.16.2.1.1,RMON-MIB::historyControlEntry,,not-accessible,historyControlIndex,current,,A list of parameters that set up a periodic sampling of statistics. As an example, an instance of the historyControlInterval object might be named historyControlInterval.2
.1.3.6.1.2.1.16.2.1.1.1,RMON-MIB::historyControlIndex,Integer32,read-only,,current,,An index that uniquely identifies an entry in the historyControl table. Each such entry defines a set of samples at a particular interval for an interface on the device.
.1.3.6.1.2.1.16.2.1.1.2,RMON-MIB::historyControlDataSource,OBJECT,read-create,,current,,This object identifies the source of the data for which historical data was collected and placed in a media-specific table on behalf of this historyControlEntry. This source can be any interface on this device. In order to identify a particular interface, this object shall identify the instance of the ifIndex object, defined in RFC 2233 [17], for the desired interface. For example, if an entry were to receive data from interface #1, this object would be set to ifIndex.1. The statistics in this group reflect all packets on the local network segment attached to the identified interface. An agent may or may not be able to tell if fundamental changes to the media of the interface have occurred and necessitate an invalidation of this entry. For example, a hot-pluggable ethernet card could be pulled out and replaced by a token-ring card. In such a case, if the agent has such knowledge of the change, it is recommended that it invalidate this entry. This object may not be modified if the associated historyControlStatus object is equal to valid(1).
.1.3.6.1.2.1.16.2.1.1.3,RMON-MIB::historyControlBucketsRequested,Integer32,read-create,,current,,The requested number of discrete time intervals over which data is to be saved in the part of the media-specific table associated with this historyControlEntry. When this object is created or modified, the probe should set historyControlBucketsGranted as closely to this object as is possible for the particular probe implementation and available resources.
.1.3.6.1.2.1.16.2.1.1.4,RMON-MIB::historyControlBucketsGranted,Integer32,read-only,,current,,The number of discrete sampling intervals over which data shall be saved in the part of the media-specific table associated with this historyControlEntry. When the associated historyControlBucketsRequested object is created or modified, the probe should set this object as closely to the requested value as is possible for the particular probe implementation and available resources. The probe must not lower this value except as a result of a modification to the associated historyControlBucketsRequested object. There will be times when the actual number of buckets associated with this entry is less than the value of this object. In this case, at the end of each sampling interval, a new bucket will be added to the media-specific table. When the number of buckets reaches the value of this object and a new bucket is to be added to the media-specific table, the oldest bucket associated with this historyControlEntry shall be deleted by the agent so that the new bucket can be added. When the value of this object changes to a value less than the current value, entries are deleted from the media-specific table associated with this historyControlEntry. Enough of the oldest of these entries shall be deleted by the agent so that their number remains less than or equal to the new value of this object. When the value of this object changes to a value greater than the current value, the number of associated media- specific entries may be allowed to grow.
.1.3.6.1.2.1.16.2.1.1.5,RMON-MIB::historyControlInterval,Integer32,read-create,,current,,The interval in seconds over which the data is sampled for each bucket in the part of the media-specific table associated with this historyControlEntry. This interval can be set to any number of seconds between 1 and 3600 (1 hour). Because the counters in a bucket may overflow at their maximum value with no indication, a prudent manager will take into account the possibility of overflow in any of the associated counters. It is important to consider the minimum time in which any counter could overflow on a particular media type and set the historyControlInterval object to a value less than this interval. This is typically most important for the 'octets' counter in any media-specific table. For example, on an Ethernet network, the etherHistoryOctets counter could overflow in about one hour at the Ethernet's maximum utilization. This object may not be modified if the associated historyControlStatus object is equal to valid(1).
.1.3.6.1.2.1.16.2.1.1.6,RMON-MIB::historyControlOwner,OCTET,read-create,,current,,The entity that configured this entry and is therefore using the resources assigned to it.
.1.3.6.1.2.1.16.2.1.1.7,RMON-MIB::historyControlStatus,INTEGER,read-create,,current,valid(1):createRequest(2):underCreation(3):invalid(4),The status of this historyControl entry. Each instance of the media-specific table associated with this historyControlEntry will be deleted by the agent if this historyControlEntry is not equal to valid(1).
.1.3.6.1.2.1.16.2.2,RMON-MIB::etherHistoryTable,,not-accessible,,current,,A list of Ethernet history entries.
.1.3.6.1.2.1.16.2.2.1,RMON-MIB::etherHistoryEntry,,not-accessible,etherHistoryIndex:etherHistorySampleIndex,current,,An historical sample of Ethernet statistics on a particular Ethernet interface. This sample is associated with the historyControlEntry which set up the parameters for a regular collection of these samples. As an example, an instance of the etherHistoryPkts object might be named etherHistoryPkts.2.89
.1.3.6.1.2.1.16.2.2.1.1,RMON-MIB::etherHistoryIndex,Integer32,read-only,,current,,The history of which this entry is a part. The history identified by a particular value of this index is the same history as identified by the same value of historyControlIndex.
.1.3.6.1.2.1.16.2.2.1.2,RMON-MIB::etherHistorySampleIndex,Integer32,read-only,,current,,An index that uniquely identifies the particular sample this entry represents among all samples associated with the same historyControlEntry. This index starts at 1 and increases by one as each new sample is taken.
.1.3.6.1.2.1.16.2.2.1.3,RMON-MIB::etherHistoryIntervalStart,TimeTicks,read-only,,current,,The value of sysUpTime at the start of the interval over which this sample was measured. If the probe keeps track of the time of day, it should start the first sample of the history at a time such that when the next hour of the day begins, a sample is started at that instant. Note that following this rule may require the probe to delay collecting the first sample of the history, as each sample must be of the same interval. Also note that the sample which is currently being collected is not accessible in this table until the end of its interval.
.1.3.6.1.2.1.16.2.2.1.4,RMON-MIB::etherHistoryDropEvents,Counter32,read-only,,current,,The total number of events in which packets were dropped by the probe due to lack of resources during this sampling interval. Note that this number is not necessarily the number of packets dropped, it is just the number of times this condition has been detected.
.1.3.6.1.2.1.16.2.2.1.5,RMON-MIB::etherHistoryOctets,Counter32,read-only,,current,,The total number of octets of data (including those in bad packets) received on the network (excluding framing bits but including FCS octets).
.1.3.6.1.2.1.16.2.2.1.6,RMON-MIB::etherHistoryPkts,Counter32,read-only,,current,,The number of packets (including bad packets) received during this sampling interval.
.1.3.6.1.2.1.16.2.2.1.7,RMON-MIB::etherHistoryBroadcastPkts,Counter32,read-only,,current,,The number of good packets received during this sampling interval that were directed to the broadcast address.
.1.3.6.1.2.1.16.2.2.1.8,RMON-MIB::etherHistoryMulticastPkts,Counter32,read-only,,current,,The number of good packets received during this sampling interval that were directed to a multicast address. Note that this number does not include packets addressed to the broadcast address.
.1.3.6.1.2.1.16.2.2.1.9,RMON-MIB::etherHistoryCRCAlignErrors,Counter32,read-only,,current,,The number of packets received during this sampling interval that had a length (excluding framing bits but including FCS octets) between 64 and 1518 octets, inclusive, but had either a bad Frame Check Sequence (FCS) with an integral number of octets (FCS Error) or a bad FCS with a non-integral number of octets (Alignment Error).
.1.3.6.1.2.1.16.2.2.1.10,RMON-MIB::etherHistoryUndersizePkts,Counter32,read-only,,current,,The number of packets received during this sampling interval that were less than 64 octets long (excluding framing bits but including FCS octets) and were otherwise well formed.
.1.3.6.1.2.1.16.2.2.1.11,RMON-MIB::etherHistoryOversizePkts,Counter32,read-only,,current,,The number of packets received during this sampling interval that were longer than 1518 octets (excluding framing bits but including FCS octets) but were otherwise well formed.
.1.3.6.1.2.1.16.2.2.1.12,RMON-MIB::etherHistoryFragments,Counter32,read-only,,current,,The total number of packets received during this sampling interval that were less than 64 octets in length (excluding framing bits but including FCS octets) had either a bad Frame Check Sequence (FCS) with an integral number of octets (FCS Error) or a bad FCS with a non-integral number of octets (Alignment Error). Note that it is entirely normal for etherHistoryFragments to increment. This is because it counts both runts (which are normal occurrences due to collisions) and noise hits.
.1.3.6.1.2.1.16.2.2.1.13,RMON-MIB::etherHistoryJabbers,Counter32,read-only,,current,,The number of packets received during this sampling interval that were longer than 1518 octets (excluding framing bits but including FCS octets), and had either a bad Frame Check Sequence (FCS) with an integral number of octets (FCS Error) or a bad FCS with a non-integral number of octets (Alignment Error). Note that this definition of jabber is different than the definition in IEEE-802.3 section 8.2.1.5 (10BASE5) and section 10.3.1.4 (10BASE2). These documents define jabber as the condition where any packet exceeds 20 ms. The allowed range to detect jabber is between 20 ms and 150 ms.
.1.3.6.1.2.1.16.2.2.1.14,RMON-MIB::etherHistoryCollisions,Counter32,read-only,,current,,The best estimate of the total number of collisions on this Ethernet segment during this sampling interval. The value returned will depend on the location of the RMON probe. Section 8.2.1.3 (10BASE-5) and section 10.3.1.3 (10BASE-2) of IEEE standard 802.3 states that a station must detect a collision, in the receive mode, if three or more stations are transmitting simultaneously. A repeater port must detect a collision when two or more stations are transmitting simultaneously. Thus a probe placed on a repeater port could record more collisions than a probe connected to a station on the same segment would. Probe location plays a much smaller role when considering 10BASE-T. 14.2.1.4 (10BASE-T) of IEEE standard 802.3 defines a collision as the simultaneous presence of signals on the DO and RD circuits (transmitting and receiving at the same time). A 10BASE-T station can only detect collisions when it is transmitting. Thus probes placed on a station and a repeater, should report the same number of collisions. Note also that an RMON probe inside a repeater should ideally report collisions between the repeater and one or more other hosts (transmit collisions as defined by IEEE 802.3k) plus receiver collisions observed on any coax segments to which the repeater is connected.
.1.3.6.1.2.1.16.2.2.1.15,RMON-MIB::etherHistoryUtilization,Integer32,read-only,,current,,The best estimate of the mean physical layer network utilization on this interface during this sampling interval, in hundredths of a percent.
.1.3.6.1.2.1.16.2.3,TOKEN-RING-RMON-MIB::tokenRingMLHistoryTable,,not-accessible,,mandatory,,A list of Mac-Layer Token Ring statistics entries.
.1.3.6.1.2.1.16.2.3.1,TOKEN-RING-RMON-MIB::tokenRingMLHistoryEntry,,not-accessible,tokenRingMLHistoryIndex:tokenRingMLHistorySampleIndex,mandatory,,A collection of Mac-Layer statistics kept for a particular Token Ring interface.
.1.3.6.1.2.1.16.2.3.1.1,TOKEN-RING-RMON-MIB::tokenRingMLHistoryIndex,INTEGER,read-only,,mandatory,,The history of which this entry is a part. The history identified by a particular value of this index is the same history as identified by the same value of historyControlIndex.
.1.3.6.1.2.1.16.2.3.1.2,TOKEN-RING-RMON-MIB::tokenRingMLHistorySampleIndex,INTEGER,read-only,,mandatory,,An index that uniquely identifies the particular Mac-Layer sample this entry represents among all Mac-Layer samples associated with the same historyControlEntry. This index starts at 1 and increases by one as each new sample is taken.
.1.3.6.1.2.1.16.2.3.1.3,TOKEN-RING-RMON-MIB::tokenRingMLHistoryIntervalStart,TimeTicks,read-only,,mandatory,,The value of sysUpTime at the start of the interval over which this sample was measured. If the probe keeps track of the time of day, it should start the first sample of the history at a time such that when the next hour of the day begins, a sample is started at that instant. Note that following this rule may require the probe to delay collecting the first sample of the history, as each sample must be of the same interval. Also note that the sample which is currently being collected is not accessible in this table until the end of its interval.
.1.3.6.1.2.1.16.2.3.1.4,TOKEN-RING-RMON-MIB::tokenRingMLHistoryDropEvents,Counter32,read-only,,mandatory,,The total number of events in which packets were dropped by the probe due to lack of resources during this sampling interval. Note that this number is not necessarily the number of packets dropped, it is just the number of times this condition has been detected.
.1.3.6.1.2.1.16.2.3.1.5,TOKEN-RING-RMON-MIB::tokenRingMLHistoryMacOctets,Counter32,read-only,,mandatory,,The total number of octets of data in MAC packets (excluding those that were not good frames) received on the network during this sampling interval (excluding framing bits but including FCS octets).
.1.3.6.1.2.1.16.2.3.1.6,TOKEN-RING-RMON-MIB::tokenRingMLHistoryMacPkts,Counter32,read-only,,mandatory,,The total number of MAC packets (excluding those that were not good frames) received during this sampling interval.
.1.3.6.1.2.1.16.2.3.1.7,TOKEN-RING-RMON-MIB::tokenRingMLHistoryRingPurgeEvents,Counter32,read-only,,mandatory,,The total number of times that the ring entered the ring purge state from normal ring state during this sampling interval. The ring purge state that comes from the claim token or beacon state is not counted.
.1.3.6.1.2.1.16.2.3.1.8,TOKEN-RING-RMON-MIB::tokenRingMLHistoryRingPurgePkts,Counter32,read-only,,mandatory,,The total number of Ring Purge MAC packets detected by the probe during this sampling interval.
.1.3.6.1.2.1.16.2.3.1.9,TOKEN-RING-RMON-MIB::tokenRingMLHistoryBeaconEvents,Counter32,read-only,,mandatory,,The total number of times that the ring enters a beaconing state (beaconFrameStreamingState, beaconBitStreamingState, beaconSetRecoveryModeState, or beaconRingSignalLossState) during this sampling interval. Note that a change of the source address of the beacon packet does not constitute a new beacon event.
.1.3.6.1.2.1.16.2.3.1.10,TOKEN-RING-RMON-MIB::tokenRingMLHistoryBeaconTime,INTEGER,read-only,,mandatory,,The amount of time that the ring has been in the beaconing state during this sampling interval.
.1.3.6.1.2.1.16.2.3.1.11,TOKEN-RING-RMON-MIB::tokenRingMLHistoryBeaconPkts,Counter32,read-only,,mandatory,,The total number of beacon MAC packets detected by the probe during this sampling interval.
.1.3.6.1.2.1.16.2.3.1.12,TOKEN-RING-RMON-MIB::tokenRingMLHistoryClaimTokenEvents,Counter32,read-only,,mandatory,,The total number of times that the ring enters the claim token state from normal ring state or ring purge state during this sampling interval. The claim token state that comes from the beacon state is not counted.
.1.3.6.1.2.1.16.2.3.1.13,TOKEN-RING-RMON-MIB::tokenRingMLHistoryClaimTokenPkts,Counter32,read-only,,mandatory,,The total number of claim token MAC packets detected by the probe during this sampling interval.
.1.3.6.1.2.1.16.2.3.1.14,TOKEN-RING-RMON-MIB::tokenRingMLHistoryNAUNChanges,Counter32,read-only,,mandatory,,The total number of NAUN changes detected by the probe during this sampling interval.
.1.3.6.1.2.1.16.2.3.1.15,TOKEN-RING-RMON-MIB::tokenRingMLHistoryLineErrors,Counter32,read-only,,mandatory,,The total number of line errors reported in error reporting packets detected by the probe during this sampling interval.
.1.3.6.1.2.1.16.2.3.1.16,TOKEN-RING-RMON-MIB::tokenRingMLHistoryInternalErrors,Counter32,read-only,,mandatory,,The total number of adapter internal errors reported in error reporting packets detected by the probe during this sampling interval.
.1.3.6.1.2.1.16.2.3.1.17,TOKEN-RING-RMON-MIB::tokenRingMLHistoryBurstErrors,Counter32,read-only,,mandatory,,The total number of burst errors reported in error reporting packets detected by the probe during this sampling interval.
.1.3.6.1.2.1.16.2.3.1.18,TOKEN-RING-RMON-MIB::tokenRingMLHistoryACErrors,Counter32,read-only,,mandatory,,The total number of AC (Address Copied) errors reported in error reporting packets detected by the probe during this sampling interval.
.1.3.6.1.2.1.16.2.3.1.19,TOKEN-RING-RMON-MIB::tokenRingMLHistoryAbortErrors,Counter32,read-only,,mandatory,,The total number of abort delimiters reported in error reporting packets detected by the probe during this sampling interval.
.1.3.6.1.2.1.16.2.3.1.20,TOKEN-RING-RMON-MIB::tokenRingMLHistoryLostFrameErrors,Counter32,read-only,,mandatory,,The total number of lost frame errors reported in error reporting packets detected by the probe during this sampling interval.
.1.3.6.1.2.1.16.2.3.1.21,TOKEN-RING-RMON-MIB::tokenRingMLHistoryCongestionErrors,Counter32,read-only,,mandatory,,The total number of receive congestion errors reported in error reporting packets detected by the probe during this sampling interval.
.1.3.6.1.2.1.16.2.3.1.22,TOKEN-RING-RMON-MIB::tokenRingMLHistoryFrameCopiedErrors,Counter32,read-only,,mandatory,,The total number of frame copied errors reported in error reporting packets detected by the probe during this sampling interval.
.1.3.6.1.2.1.16.2.3.1.23,TOKEN-RING-RMON-MIB::tokenRingMLHistoryFrequencyErrors,Counter32,read-only,,mandatory,,The total number of frequency errors reported in error reporting packets detected by the probe during this sampling interval.
.1.3.6.1.2.1.16.2.3.1.24,TOKEN-RING-RMON-MIB::tokenRingMLHistoryTokenErrors,Counter32,read-only,,mandatory,,The total number of token errors reported in error reporting packets detected by the probe during this sampling interval.
.1.3.6.1.2.1.16.2.3.1.25,TOKEN-RING-RMON-MIB::tokenRingMLHistorySoftErrorReports,Counter32,read-only,,mandatory,,The total number of soft error report frames detected by the probe during this sampling interval.
.1.3.6.1.2.1.16.2.3.1.26,TOKEN-RING-RMON-MIB::tokenRingMLHistoryRingPollEvents,Counter32,read-only,,mandatory,,The total number of ring poll events detected by the probe during this sampling interval.
.1.3.6.1.2.1.16.2.3.1.27,TOKEN-RING-RMON-MIB::tokenRingMLHistoryActiveStations,INTEGER,read-only,,mandatory,,The maximum number of active stations on the ring detected by the probe during this sampling interval.
.1.3.6.1.2.1.16.2.4,TOKEN-RING-RMON-MIB::tokenRingPHistoryTable,,not-accessible,,mandatory,,A list of promiscuous Token Ring statistics entries.
.1.3.6.1.2.1.16.2.4.1,TOKEN-RING-RMON-MIB::tokenRingPHistoryEntry,,not-accessible,tokenRingPHistoryIndex:tokenRingPHistorySampleIndex,mandatory,,A collection of promiscuous statistics kept for a particular Token Ring interface.
.1.3.6.1.2.1.16.2.4.1.1,TOKEN-RING-RMON-MIB::tokenRingPHistoryIndex,INTEGER,read-only,,mandatory,,The history of which this entry is a part. The history identified by a particular value of this index is the same history as identified by the same value of historyControlIndex.
.1.3.6.1.2.1.16.2.4.1.2,TOKEN-RING-RMON-MIB::tokenRingPHistorySampleIndex,INTEGER,read-only,,mandatory,,An index that uniquely identifies the particular sample this entry represents among all samples associated with the same historyControlEntry. This index starts at 1 and increases by one as each new sample is taken.
.1.3.6.1.2.1.16.2.4.1.3,TOKEN-RING-RMON-MIB::tokenRingPHistoryIntervalStart,TimeTicks,read-only,,mandatory,,The value of sysUpTime at the start of the interval over which this sample was measured. If the probe keeps track of the time of day, it should start the first sample of the history at a time such that when the next hour of the day begins, a sample is started at that instant. Note that following this rule may require the probe to delay collecting the first sample of the history, as each sample must be of the same interval. Also note that the sample which is currently being collected is not accessible in this table until the end of its interval.
.1.3.6.1.2.1.16.2.4.1.4,TOKEN-RING-RMON-MIB::tokenRingPHistoryDropEvents,Counter32,read-only,,mandatory,,The total number of events in which packets were dropped by the probe due to lack of resources during this sampling interval. Note that this number is not necessarily the number of packets dropped, it is just the number of times this condition has been detected.
.1.3.6.1.2.1.16.2.4.1.5,TOKEN-RING-RMON-MIB::tokenRingPHistoryDataOctets,Counter32,read-only,,mandatory,,The total number of octets of data in good frames received on the network (excluding framing bits but including FCS octets) in non-MAC packets during this sampling interval.
.1.3.6.1.2.1.16.2.4.1.6,TOKEN-RING-RMON-MIB::tokenRingPHistoryDataPkts,Counter32,read-only,,mandatory,,The total number of good non-MAC frames received during this sampling interval.
.1.3.6.1.2.1.16.2.4.1.7,TOKEN-RING-RMON-MIB::tokenRingPHistoryDataBroadcastPkts,Counter32,read-only,,mandatory,,The total number of good non-MAC frames received during this sampling interval that were directed to an LLC broadcast address (0xFFFFFFFFFFFF or 0xC000FFFFFFFF).
.1.3.6.1.2.1.16.2.4.1.8,TOKEN-RING-RMON-MIB::tokenRingPHistoryDataMulticastPkts,Counter32,read-only,,mandatory,,The total number of good non-MAC frames received during this sampling interval that were directed to a local or global multicast or functional address. Note that this number does not include packets directed to the broadcast address.
.1.3.6.1.2.1.16.2.4.1.9,TOKEN-RING-RMON-MIB::tokenRingPHistoryDataPkts18to63Octets,Counter32,read-only,,mandatory,,The total number of good non-MAC frames received during this sampling interval that were between 18 and 63 octets in length inclusive, excluding framing bits but including FCS octets.
.1.3.6.1.2.1.16.2.4.1.10,TOKEN-RING-RMON-MIB::tokenRingPHistoryDataPkts64to127Octets,Counter32,read-only,,mandatory,,The total number of good non-MAC frames received during this sampling interval that were between 64 and 127 octets in length inclusive, excluding framing bits but including FCS octets.
.1.3.6.1.2.1.16.2.4.1.11,TOKEN-RING-RMON-MIB::tokenRingPHistoryDataPkts128to255Octets,Counter32,read-only,,mandatory,,The total number of good non-MAC frames received during this sampling interval that were between 128 and 255 octets in length inclusive, excluding framing bits but including FCS octets.
.1.3.6.1.2.1.16.2.4.1.12,TOKEN-RING-RMON-MIB::tokenRingPHistoryDataPkts256to511Octets,Counter32,read-only,,mandatory,,The total number of good non-MAC frames received during this sampling interval that were between 256 and 511 octets in length inclusive, excluding framing bits but including FCS octets.
.1.3.6.1.2.1.16.2.4.1.13,TOKEN-RING-RMON-MIB::tokenRingPHistoryDataPkts512to1023Octets,Counter32,read-only,,mandatory,,The total number of good non-MAC frames received during this sampling interval that were between 512 and 1023 octets in length inclusive, excluding framing bits but including FCS octets.
.1.3.6.1.2.1.16.2.4.1.14,TOKEN-RING-RMON-MIB::tokenRingPHistoryDataPkts1024to2047Octets,Counter32,read-only,,mandatory,,The total number of good non-MAC frames received during this sampling interval that were between 1024 and 2047 octets in length inclusive, excluding framing bits but including FCS octets.
.1.3.6.1.2.1.16.2.4.1.15,TOKEN-RING-RMON-MIB::tokenRingPHistoryDataPkts2048to4095Octets,Counter32,read-only,,mandatory,,The total number of good non-MAC frames received during this sampling interval that were between 2048 and 4095 octets in length inclusive, excluding framing bits but including FCS octets.
.1.3.6.1.2.1.16.2.4.1.16,TOKEN-RING-RMON-MIB::tokenRingPHistoryDataPkts4096to8191Octets,Counter32,read-only,,mandatory,,The total number of good non-MAC frames received during this sampling interval that were between 4096 and 8191 octets in length inclusive, excluding framing bits but including FCS octets.
.1.3.6.1.2.1.16.2.4.1.17,TOKEN-RING-RMON-MIB::tokenRingPHistoryDataPkts8192to18000Octets,Counter32,read-only,,mandatory,,The total number of good non-MAC frames received during this sampling interval that were between 8192 and 18000 octets in length inclusive, excluding framing bits but including FCS octets.
.1.3.6.1.2.1.16.2.4.1.18,TOKEN-RING-RMON-MIB::tokenRingPHistoryDataPktsGreaterThan18000Octets,Counter32,read-only,,mandatory,,The total number of good non-MAC frames received during this sampling interval that were greater than 18000 octets in length, excluding framing bits but including FCS octets.
.1.3.6.1.2.1.16.2.5,RMON2-MIB::historyControl2Table,,not-accessible,,current,,Contains the RMON-2 augmentations to RMON-1.
.1.3.6.1.2.1.16.2.5.1,RMON2-MIB::historyControl2Entry,,not-accessible,,current,,Contains the RMON-2 augmentations to RMON-1.
.1.3.6.1.2.1.16.2.5.1.1,RMON2-MIB::historyControlDroppedFrames,Counter32,read-only,,current,,The total number of frames that were received by the probe and therefore not accounted for in the *StatsDropEvents, but that the probe chose not to count for this entry for whatever reason. Most often, this event occurs when the probe is out of some resources and decides to shed load from this collection. This count does not include packets that were not counted because they had MAC-layer errors. Note that, unlike the dropEvents counter, this number is the exact number of frames dropped.
.1.3.6.1.2.1.16.3,RMON-MIB::alarm,,,,,,
.1.3.6.1.2.1.16.3.1,RMON-MIB::alarmTable,,not-accessible,,current,,A list of alarm entries.
.1.3.6.1.2.1.16.3.1.1,RMON-MIB::alarmEntry,,not-accessible,alarmIndex,current,,A list of parameters that set up a periodic checking for alarm conditions. For example, an instance of the alarmValue object might be named alarmValue.8
.1.3.6.1.2.1.16.3.1.1.1,RMON-MIB::alarmIndex,Integer32,read-only,,current,,An index that uniquely identifies an entry in the alarm table. Each such entry defines a diagnostic sample at a particular interval for an object on the device.
.1.3.6.1.2.1.16.3.1.1.2,RMON-MIB::alarmInterval,Integer32,read-create,,current,,The interval in seconds over which the data is sampled and compared with the rising and falling thresholds. When setting this variable, care should be taken in the case of deltaValue sampling - the interval should be set short enough that the sampled variable is very unlikely to increase or decrease by more than 2^31 - 1 during a single sampling interval. This object may not be modified if the associated alarmStatus object is equal to valid(1).
.1.3.6.1.2.1.16.3.1.1.3,RMON-MIB::alarmVariable,OBJECT,read-create,,current,,The object identifier of the particular variable to be sampled. Only variables that resolve to an ASN.1 primitive type of INTEGER (INTEGER, Integer32, Counter32, Counter64, Gauge, or TimeTicks) may be sampled. Because SNMP access control is articulated entirely in terms of the contents of MIB views, no access control mechanism exists that can restrict the value of this object to identify only those objects that exist in a particular MIB view. Because there is thus no acceptable means of restricting the read access that could be obtained through the alarm mechanism, the probe must only grant write access to this object in those views that have read access to all objects on the probe. During a set operation, if the supplied variable name is not available in the selected MIB view, a badValue error must be returned. If at any time the variable name of an established alarmEntry is no longer available in the selected MIB view, the probe must change the status of this alarmEntry to invalid(4). This object may not be modified if the associated alarmStatus object is equal to valid(1).
.1.3.6.1.2.1.16.3.1.1.4,RMON-MIB::alarmSampleType,INTEGER,read-create,,current,absoluteValue(1):deltaValue(2),The method of sampling the selected variable and calculating the value to be compared against the thresholds. If the value of this object is absoluteValue(1), the value of the selected variable will be compared directly with the thresholds at the end of the sampling interval. If the value of this object is deltaValue(2), the value of the selected variable at the last sample will be subtracted from the current value, and the difference compared with the thresholds. This object may not be modified if the associated alarmStatus object is equal to valid(1).
.1.3.6.1.2.1.16.3.1.1.5,RMON-MIB::alarmValue,Integer32,read-only,,current,,The value of the statistic during the last sampling period. For example, if the sample type is deltaValue, this value will be the difference between the samples at the beginning and end of the period. If the sample type is absoluteValue, this value will be the sampled value at the end of the period. This is the value that is compared with the rising and falling thresholds. The value during the current sampling period is not made available until the period is completed and will remain available until the next period completes.
.1.3.6.1.2.1.16.3.1.1.6,RMON-MIB::alarmStartupAlarm,INTEGER,read-create,,current,risingAlarm(1):fallingAlarm(2):risingOrFallingAlarm(3),The alarm that may be sent when this entry is first set to valid. If the first sample after this entry becomes valid is greater than or equal to the risingThreshold and alarmStartupAlarm is equal to risingAlarm(1) or risingOrFallingAlarm(3), then a single rising alarm will be generated. If the first sample after this entry becomes valid is less than or equal to the fallingThreshold and alarmStartupAlarm is equal to fallingAlarm(2) or risingOrFallingAlarm(3), then a single falling alarm will be generated. This object may not be modified if the associated alarmStatus object is equal to valid(1).
.1.3.6.1.2.1.16.3.1.1.7,RMON-MIB::alarmRisingThreshold,Integer32,read-create,,current,,A threshold for the sampled statistic. When the current sampled value is greater than or equal to this threshold, and the value at the last sampling interval was less than this threshold, a single event will be generated. A single event will also be generated if the first sample after this entry becomes valid is greater than or equal to this threshold and the associated alarmStartupAlarm is equal to risingAlarm(1) or risingOrFallingAlarm(3). After a rising event is generated, another such event will not be generated until the sampled value falls below this threshold and reaches the alarmFallingThreshold. This object may not be modified if the associated alarmStatus object is equal to valid(1).
.1.3.6.1.2.1.16.3.1.1.8,RMON-MIB::alarmFallingThreshold,Integer32,read-create,,current,,A threshold for the sampled statistic. When the current sampled value is less than or equal to this threshold, and the value at the last sampling interval was greater than this threshold, a single event will be generated. A single event will also be generated if the first sample after this entry becomes valid is less than or equal to this threshold and the associated alarmStartupAlarm is equal to fallingAlarm(2) or risingOrFallingAlarm(3). After a falling event is generated, another such event will not be generated until the sampled value rises above this threshold and reaches the alarmRisingThreshold. This object may not be modified if the associated alarmStatus object is equal to valid(1).
.1.3.6.1.2.1.16.3.1.1.9,RMON-MIB::alarmRisingEventIndex,Integer32,read-create,,current,,The index of the eventEntry that is used when a rising threshold is crossed. The eventEntry identified by a particular value of this index is the same as identified by the same value of the eventIndex object. If there is no corresponding entry in the eventTable, then no association exists. In particular, if this value is zero, no associated event will be generated, as zero is not a valid event index. This object may not be modified if the associated alarmStatus object is equal to valid(1).
.1.3.6.1.2.1.16.3.1.1.10,RMON-MIB::alarmFallingEventIndex,Integer32,read-create,,current,,The index of the eventEntry that is used when a falling threshold is crossed. The eventEntry identified by a particular value of this index is the same as identified by the same value of the eventIndex object. If there is no corresponding entry in the eventTable, then no association exists. In particular, if this value is zero, no associated event will be generated, as zero is not a valid event index. This object may not be modified if the associated alarmStatus object is equal to valid(1).
.1.3.6.1.2.1.16.3.1.1.11,RMON-MIB::alarmOwner,OCTET,read-create,,current,,The entity that configured this entry and is therefore using the resources assigned to it.
.1.3.6.1.2.1.16.3.1.1.12,RMON-MIB::alarmStatus,INTEGER,read-create,,current,valid(1):createRequest(2):underCreation(3):invalid(4),The status of this alarm entry.
.1.3.6.1.2.1.16.4,RMON-MIB::hosts,,,,,,
.1.3.6.1.2.1.16.4.1,RMON-MIB::hostControlTable,,not-accessible,,current,,A list of host table control entries.
.1.3.6.1.2.1.16.4.1.1,RMON-MIB::hostControlEntry,,not-accessible,hostControlIndex,current,,A list of parameters that set up the discovery of hosts on a particular interface and the collection of statistics about these hosts. For example, an instance of the hostControlTableSize object might be named hostControlTableSize.1
.1.3.6.1.2.1.16.4.1.1.1,RMON-MIB::hostControlIndex,Integer32,read-only,,current,,An index that uniquely identifies an entry in the hostControl table. Each such entry defines a function that discovers hosts on a particular interface and places statistics about them in the hostTable and the hostTimeTable on behalf of this hostControlEntry.
.1.3.6.1.2.1.16.4.1.1.2,RMON-MIB::hostControlDataSource,OBJECT,read-create,,current,,This object identifies the source of the data for this instance of the host function. This source can be any interface on this device. In order to identify a particular interface, this object shall identify the instance of the ifIndex object, defined in RFC 2233 [17], for the desired interface. For example, if an entry were to receive data from interface #1, this object would be set to ifIndex.1. The statistics in this group reflect all packets on the local network segment attached to the identified interface. An agent may or may not be able to tell if fundamental changes to the media of the interface have occurred and necessitate an invalidation of this entry. For example, a hot-pluggable ethernet card could be pulled out and replaced by a token-ring card. In such a case, if the agent has such knowledge of the change, it is recommended that it invalidate this entry. This object may not be modified if the associated hostControlStatus object is equal to valid(1).
.1.3.6.1.2.1.16.4.1.1.3,RMON-MIB::hostControlTableSize,Integer32,read-only,,current,,The number of hostEntries in the hostTable and the hostTimeTable associated with this hostControlEntry.
.1.3.6.1.2.1.16.4.1.1.4,RMON-MIB::hostControlLastDeleteTime,TimeTicks,read-only,,current,,The value of sysUpTime when the last entry was deleted from the portion of the hostTable associated with this hostControlEntry. If no deletions have occurred, this value shall be zero.
.1.3.6.1.2.1.16.4.1.1.5,RMON-MIB::hostControlOwner,OCTET,read-create,,current,,The entity that configured this entry and is therefore using the resources assigned to it.
.1.3.6.1.2.1.16.4.1.1.6,RMON-MIB::hostControlStatus,INTEGER,read-create,,current,valid(1):createRequest(2):underCreation(3):invalid(4),The status of this hostControl entry. If this object is not equal to valid(1), all associated entries in the hostTable, hostTimeTable, and the hostTopNTable shall be deleted by the agent.
.1.3.6.1.2.1.16.4.2,RMON-MIB::hostTable,,not-accessible,,current,,A list of host entries.
.1.3.6.1.2.1.16.4.2.1,RMON-MIB::hostEntry,,not-accessible,hostIndex:hostAddress,current,,A collection of statistics for a particular host that has been discovered on an interface of this device. For example, an instance of the hostOutBroadcastPkts object might be named hostOutBroadcastPkts.1.6.8.0.32.27.3.176
.1.3.6.1.2.1.16.4.2.1.1,RMON-MIB::hostAddress,OCTET,read-only,,current,,The physical address of this host.
.1.3.6.1.2.1.16.4.2.1.2,RMON-MIB::hostCreationOrder,Integer32,read-only,,current,,An index that defines the relative ordering of the creation time of hosts captured for a particular hostControlEntry. This index shall be between 1 and N, where N is the value of the associated hostControlTableSize. The ordering of the indexes is based on the order of each entry's insertion into the table, in which entries added earlier have a lower index value than entries added later. It is important to note that the order for a particular entry may change as an (earlier) entry is deleted from the table. Because this order may change, management stations should make use of the hostControlLastDeleteTime variable in the hostControlEntry associated with the relevant portion of the hostTable. By observing this variable, the management station may detect the circumstances where a previous association between a value of hostCreationOrder and a hostEntry may no longer hold.
.1.3.6.1.2.1.16.4.2.1.3,RMON-MIB::hostIndex,Integer32,read-only,,current,,The set of collected host statistics of which this entry is a part. The set of hosts identified by a particular value of this index is associated with the hostControlEntry as identified by the same value of hostControlIndex.
.1.3.6.1.2.1.16.4.2.1.4,RMON-MIB::hostInPkts,Counter32,read-only,,current,,The number of good packets transmitted to this address since it was added to the hostTable.
.1.3.6.1.2.1.16.4.2.1.5,RMON-MIB::hostOutPkts,Counter32,read-only,,current,,The number of packets, including bad packets, transmitted by this address since it was added to the hostTable.
.1.3.6.1.2.1.16.4.2.1.6,RMON-MIB::hostInOctets,Counter32,read-only,,current,,The number of octets transmitted to this address since it was added to the hostTable (excluding framing bits but including FCS octets), except for those octets in bad packets.
.1.3.6.1.2.1.16.4.2.1.7,RMON-MIB::hostOutOctets,Counter32,read-only,,current,,The number of octets transmitted by this address since it was added to the hostTable (excluding framing bits but including FCS octets), including those octets in bad packets.
.1.3.6.1.2.1.16.4.2.1.8,RMON-MIB::hostOutErrors,Counter32,read-only,,current,,The number of bad packets transmitted by this address since this host was added to the hostTable.
.1.3.6.1.2.1.16.4.2.1.9,RMON-MIB::hostOutBroadcastPkts,Counter32,read-only,,current,,The number of good packets transmitted by this address that were directed to the broadcast address since this host was added to the hostTable.
.1.3.6.1.2.1.16.4.2.1.10,RMON-MIB::hostOutMulticastPkts,Counter32,read-only,,current,,The number of good packets transmitted by this address that were directed to a multicast address since this host was added to the hostTable. Note that this number does not include packets directed to the broadcast address.
.1.3.6.1.2.1.16.4.3,RMON-MIB::hostTimeTable,,not-accessible,,current,,A list of time-ordered host table entries.
.1.3.6.1.2.1.16.4.3.1,RMON-MIB::hostTimeEntry,,not-accessible,hostTimeIndex:hostTimeCreationOrder,current,,A collection of statistics for a particular host that has been discovered on an interface of this device. This collection includes the relative ordering of the creation time of this object. For example, an instance of the hostTimeOutBroadcastPkts object might be named hostTimeOutBroadcastPkts.1.687
.1.3.6.1.2.1.16.4.3.1.1,RMON-MIB::hostTimeAddress,OCTET,read-only,,current,,The physical address of this host.
.1.3.6.1.2.1.16.4.3.1.2,RMON-MIB::hostTimeCreationOrder,Integer32,read-only,,current,,An index that uniquely identifies an entry in the hostTime table among those entries associated with the same hostControlEntry. This index shall be between 1 and N, where N is the value of the associated hostControlTableSize. The ordering of the indexes is based on the order of each entry's insertion into the table, in which entries added earlier have a lower index value than entries added later. Thus the management station has the ability to learn of new entries added to this table without downloading the entire table. It is important to note that the index for a particular entry may change as an (earlier) entry is deleted from the table. Because this order may change, management stations should make use of the hostControlLastDeleteTime variable in the hostControlEntry associated with the relevant portion of the hostTimeTable. By observing this variable, the management station may detect the circumstances where a download of the table may have missed entries, and where a previous association between a value of hostTimeCreationOrder and a hostTimeEntry may no longer hold.
.1.3.6.1.2.1.16.4.3.1.3,RMON-MIB::hostTimeIndex,Integer32,read-only,,current,,The set of collected host statistics of which this entry is a part. The set of hosts identified by a particular value of this index is associated with the hostControlEntry as identified by the same value of hostControlIndex.
.1.3.6.1.2.1.16.4.3.1.4,RMON-MIB::hostTimeInPkts,Counter32,read-only,,current,,The number of good packets transmitted to this address since it was added to the hostTimeTable.
.1.3.6.1.2.1.16.4.3.1.5,RMON-MIB::hostTimeOutPkts,Counter32,read-only,,current,,The number of packets, including bad packets, transmitted by this address since it was added to the hostTimeTable.
.1.3.6.1.2.1.16.4.3.1.6,RMON-MIB::hostTimeInOctets,Counter32,read-only,,current,,The number of octets transmitted to this address since it was added to the hostTimeTable (excluding framing bits but including FCS octets), except for those octets in bad packets.
.1.3.6.1.2.1.16.4.3.1.7,RMON-MIB::hostTimeOutOctets,Counter32,read-only,,current,,The number of octets transmitted by this address since it was added to the hostTimeTable (excluding framing bits but including FCS octets), including those octets in bad packets.
.1.3.6.1.2.1.16.4.3.1.8,RMON-MIB::hostTimeOutErrors,Counter32,read-only,,current,,The number of bad packets transmitted by this address since this host was added to the hostTimeTable.
.1.3.6.1.2.1.16.4.3.1.9,RMON-MIB::hostTimeOutBroadcastPkts,Counter32,read-only,,current,,The number of good packets transmitted by this address that were directed to the broadcast address since this host was added to the hostTimeTable.
.1.3.6.1.2.1.16.4.3.1.10,RMON-MIB::hostTimeOutMulticastPkts,Counter32,read-only,,current,,The number of good packets transmitted by this address that were directed to a multicast address since this host was added to the hostTimeTable. Note that this number does not include packets directed to the broadcast address.
.1.3.6.1.2.1.16.4.4,RMON2-MIB::hostControl2Table,,not-accessible,,current,,Contains the RMON-2 augmentations to RMON-1.
.1.3.6.1.2.1.16.4.4.1,RMON2-MIB::hostControl2Entry,,not-accessible,,current,,Contains the RMON-2 augmentations to RMON-1.
.1.3.6.1.2.1.16.4.4.1.1,RMON2-MIB::hostControlDroppedFrames,Counter32,read-only,,current,,The total number of frames that were received by the probe and therefore not accounted for in the *StatsDropEvents, but that the probe chose not to count for this entry for whatever reason. Most often, this event occurs when the probe is out of some resources and decides to shed load from this collection. This count does not include packets that were not counted because they had MAC-layer errors. Note that, unlike the dropEvents counter, this number is the exact number of frames dropped.
.1.3.6.1.2.1.16.4.4.1.2,RMON2-MIB::hostControlCreateTime,TimeTicks,read-only,,current,,The value of sysUpTime when this control entry was last activated. This can be used by the management station to ensure that the table has not been deleted and recreated between polls.
.1.3.6.1.2.1.16.5,RMON-MIB::hostTopN,,,,,,
.1.3.6.1.2.1.16.5.1,RMON-MIB::hostTopNControlTable,,not-accessible,,current,,A list of top N host control entries.
.1.3.6.1.2.1.16.5.1.1,RMON-MIB::hostTopNControlEntry,,not-accessible,hostTopNControlIndex,current,,A set of parameters that control the creation of a report of the top N hosts according to several metrics. For example, an instance of the hostTopNDuration object might be named hostTopNDuration.3
.1.3.6.1.2.1.16.5.1.1.1,RMON-MIB::hostTopNControlIndex,Integer32,read-only,,current,,An index that uniquely identifies an entry in the hostTopNControl table. Each such entry defines one top N report prepared for one interface.
.1.3.6.1.2.1.16.5.1.1.2,RMON-MIB::hostTopNHostIndex,Integer32,read-create,,current,,The host table for which a top N report will be prepared on behalf of this entry. The host table identified by a particular value of this index is associated with the same host table as identified by the same value of hostIndex. This object may not be modified if the associated hostTopNStatus object is equal to valid(1).
.1.3.6.1.2.1.16.5.1.1.3,RMON-MIB::hostTopNRateBase,INTEGER,read-create,,current,hostTopNInPkts(1):hostTopNOutPkts(2):hostTopNInOctets(3):hostTopNOutOctets(4):hostTopNOutErrors(5):hostTopNOutBroadcastPkts(6):hostTopNOutMulticastPkts(7),The variable for each host that the hostTopNRate variable is based upon. This object may not be modified if the associated hostTopNStatus object is equal to valid(1).
.1.3.6.1.2.1.16.5.1.1.4,RMON-MIB::hostTopNTimeRemaining,Integer32,read-create,,current,,The number of seconds left in the report currently being collected. When this object is modified by the management station, a new collection is started, possibly aborting a currently running report. The new value is used as the requested duration of this report, which is loaded into the associated hostTopNDuration object. When this object is set to a non-zero value, any associated hostTopNEntries shall be made inaccessible by the monitor. While the value of this object is non-zero, it decrements by one per second until it reaches zero. During this time, all associated hostTopNEntries shall remain inaccessible. At the time that this object decrements to zero, the report is made accessible in the hostTopNTable. Thus, the hostTopN table needs to be created only at the end of the collection interval.
.1.3.6.1.2.1.16.5.1.1.5,RMON-MIB::hostTopNDuration,Integer32,read-only,,current,,The number of seconds that this report has collected during the last sampling interval, or if this report is currently being collected, the number of seconds that this report is being collected during this sampling interval. When the associated hostTopNTimeRemaining object is set, this object shall be set by the probe to the same value and shall not be modified until the next time the hostTopNTimeRemaining is set. This value shall be zero if no reports have been requested for this hostTopNControlEntry.
.1.3.6.1.2.1.16.5.1.1.6,RMON-MIB::hostTopNRequestedSize,Integer32,read-create,,current,,The maximum number of hosts requested for the top N table. When this object is created or modified, the probe should set hostTopNGrantedSize as closely to this object as is possible for the particular probe implementation and available resources.
.1.3.6.1.2.1.16.5.1.1.7,RMON-MIB::hostTopNGrantedSize,Integer32,read-only,,current,,The maximum number of hosts in the top N table. When the associated hostTopNRequestedSize object is created or modified, the probe should set this object as closely to the requested value as is possible for the particular implementation and available resources. The probe must not lower this value except as a result of a set to the associated hostTopNRequestedSize object. Hosts with the highest value of hostTopNRate shall be placed in this table in decreasing order of this rate until there is no more room or until there are no more hosts.
.1.3.6.1.2.1.16.5.1.1.8,RMON-MIB::hostTopNStartTime,TimeTicks,read-only,,current,,The value of sysUpTime when this top N report was last started. In other words, this is the time that the associated hostTopNTimeRemaining object was modified to start the requested report.
.1.3.6.1.2.1.16.5.1.1.9,RMON-MIB::hostTopNOwner,OCTET,read-create,,current,,The entity that configured this entry and is therefore using the resources assigned to it.
.1.3.6.1.2.1.16.5.1.1.10,RMON-MIB::hostTopNStatus,INTEGER,read-create,,current,valid(1):createRequest(2):underCreation(3):invalid(4),The status of this hostTopNControl entry. If this object is not equal to valid(1), all associated hostTopNEntries shall be deleted by the agent.
.1.3.6.1.2.1.16.5.2,RMON-MIB::hostTopNTable,,not-accessible,,current,,A list of top N host entries.
.1.3.6.1.2.1.16.5.2.1,RMON-MIB::hostTopNEntry,,not-accessible,hostTopNReport:hostTopNIndex,current,,A set of statistics for a host that is part of a top N report. For example, an instance of the hostTopNRate object might be named hostTopNRate.3.10
.1.3.6.1.2.1.16.5.2.1.1,RMON-MIB::hostTopNReport,Integer32,read-only,,current,,This object identifies the top N report of which this entry is a part. The set of hosts identified by a particular value of this object is part of the same report as identified by the same value of the hostTopNControlIndex object.
.1.3.6.1.2.1.16.5.2.1.2,RMON-MIB::hostTopNIndex,Integer32,read-only,,current,,An index that uniquely identifies an entry in the hostTopN table among those in the same report. This index is between 1 and N, where N is the number of entries in this table. Increasing values of hostTopNIndex shall be assigned to entries with decreasing values of hostTopNRate until index N is assigned to the entry with the lowest value of hostTopNRate or there are no more hostTopNEntries.
.1.3.6.1.2.1.16.5.2.1.3,RMON-MIB::hostTopNAddress,OCTET,read-only,,current,,The physical address of this host.
.1.3.6.1.2.1.16.5.2.1.4,RMON-MIB::hostTopNRate,Integer32,read-only,,current,,The amount of change in the selected variable during this sampling interval. The selected variable is this host's instance of the object selected by hostTopNRateBase.
.1.3.6.1.2.1.16.6,RMON-MIB::matrix,,,,,,
.1.3.6.1.2.1.16.6.1,RMON-MIB::matrixControlTable,,not-accessible,,current,,A list of information entries for the traffic matrix on each interface.
.1.3.6.1.2.1.16.6.1.1,RMON-MIB::matrixControlEntry,,not-accessible,matrixControlIndex,current,,Information about a traffic matrix on a particular interface. For example, an instance of the matrixControlLastDeleteTime object might be named matrixControlLastDeleteTime.1
.1.3.6.1.2.1.16.6.1.1.1,RMON-MIB::matrixControlIndex,Integer32,read-only,,current,,An index that uniquely identifies an entry in the matrixControl table. Each such entry defines a function that discovers conversations on a particular interface and places statistics about them in the matrixSDTable and the matrixDSTable on behalf of this matrixControlEntry.
.1.3.6.1.2.1.16.6.1.1.2,RMON-MIB::matrixControlDataSource,OBJECT,read-create,,current,,This object identifies the source of the data from which this entry creates a traffic matrix. This source can be any interface on this device. In order to identify a particular interface, this object shall identify the instance of the ifIndex object, defined in RFC 2233 [17], for the desired interface. For example, if an entry were to receive data from interface #1, this object would be set to ifIndex.1. The statistics in this group reflect all packets on the local network segment attached to the identified interface. An agent may or may not be able to tell if fundamental changes to the media of the interface have occurred and necessitate an invalidation of this entry. For example, a hot-pluggable ethernet card could be pulled out and replaced by a token-ring card. In such a case, if the agent has such knowledge of the change, it is recommended that it invalidate this entry. This object may not be modified if the associated matrixControlStatus object is equal to valid(1).
.1.3.6.1.2.1.16.6.1.1.3,RMON-MIB::matrixControlTableSize,Integer32,read-only,,current,,The number of matrixSDEntries in the matrixSDTable for this interface. This must also be the value of the number of entries in the matrixDSTable for this interface.
.1.3.6.1.2.1.16.6.1.1.4,RMON-MIB::matrixControlLastDeleteTime,TimeTicks,read-only,,current,,The value of sysUpTime when the last entry was deleted from the portion of the matrixSDTable or matrixDSTable associated with this matrixControlEntry. If no deletions have occurred, this value shall be zero.
.1.3.6.1.2.1.16.6.1.1.5,RMON-MIB::matrixControlOwner,OCTET,read-create,,current,,The entity that configured this entry and is therefore using the resources assigned to it.
.1.3.6.1.2.1.16.6.1.1.6,RMON-MIB::matrixControlStatus,INTEGER,read-create,,current,valid(1):createRequest(2):underCreation(3):invalid(4),The status of this matrixControl entry. If this object is not equal to valid(1), all associated entries in the matrixSDTable and the matrixDSTable shall be deleted by the agent.
.1.3.6.1.2.1.16.6.2,RMON-MIB::matrixSDTable,,not-accessible,,current,,A list of traffic matrix entries indexed by source and destination MAC address.
.1.3.6.1.2.1.16.6.2.1,RMON-MIB::matrixSDEntry,,not-accessible,matrixSDIndex:matrixSDSourceAddress:matrixSDDestAddress,current,,A collection of statistics for communications between two addresses on a particular interface. For example, an instance of the matrixSDPkts object might be named matrixSDPkts.1.6.8.0.32.27.3.176.6.8.0.32.10.8.113
.1.3.6.1.2.1.16.6.2.1.1,RMON-MIB::matrixSDSourceAddress,OCTET,read-only,,current,,The source physical address.
.1.3.6.1.2.1.16.6.2.1.2,RMON-MIB::matrixSDDestAddress,OCTET,read-only,,current,,The destination physical address.
.1.3.6.1.2.1.16.6.2.1.3,RMON-MIB::matrixSDIndex,Integer32,read-only,,current,,The set of collected matrix statistics of which this entry is a part. The set of matrix statistics identified by a particular value of this index is associated with the same matrixControlEntry as identified by the same value of matrixControlIndex.
.1.3.6.1.2.1.16.6.2.1.4,RMON-MIB::matrixSDPkts,Counter32,read-only,,current,,The number of packets transmitted from the source address to the destination address (this number includes bad packets).
.1.3.6.1.2.1.16.6.2.1.5,RMON-MIB::matrixSDOctets,Counter32,read-only,,current,,The number of octets (excluding framing bits but including FCS octets) contained in all packets transmitted from the source address to the destination address.
.1.3.6.1.2.1.16.6.2.1.6,RMON-MIB::matrixSDErrors,Counter32,read-only,,current,,The number of bad packets transmitted from the source address to the destination address.
.1.3.6.1.2.1.16.6.3,RMON-MIB::matrixDSTable,,not-accessible,,current,,A list of traffic matrix entries indexed by destination and source MAC address.
.1.3.6.1.2.1.16.6.3.1,RMON-MIB::matrixDSEntry,,not-accessible,matrixDSIndex:matrixDSDestAddress:matrixDSSourceAddress,current,,A collection of statistics for communications between two addresses on a particular interface. For example, an instance of the matrixSDPkts object might be named matrixSDPkts.1.6.8.0.32.10.8.113.6.8.0.32.27.3.176
.1.3.6.1.2.1.16.6.3.1.1,RMON-MIB::matrixDSSourceAddress,OCTET,read-only,,current,,The source physical address.
.1.3.6.1.2.1.16.6.3.1.2,RMON-MIB::matrixDSDestAddress,OCTET,read-only,,current,,The destination physical address.
.1.3.6.1.2.1.16.6.3.1.3,RMON-MIB::matrixDSIndex,Integer32,read-only,,current,,The set of collected matrix statistics of which this entry is a part. The set of matrix statistics identified by a particular value of this index is associated with the same matrixControlEntry as identified by the same value of matrixControlIndex.
.1.3.6.1.2.1.16.6.3.1.4,RMON-MIB::matrixDSPkts,Counter32,read-only,,current,,The number of packets transmitted from the source address to the destination address (this number includes bad packets).
.1.3.6.1.2.1.16.6.3.1.5,RMON-MIB::matrixDSOctets,Counter32,read-only,,current,,The number of octets (excluding framing bits but including FCS octets) contained in all packets transmitted from the source address to the destination address.
.1.3.6.1.2.1.16.6.3.1.6,RMON-MIB::matrixDSErrors,Counter32,read-only,,current,,The number of bad packets transmitted from the source address to the destination address.
.1.3.6.1.2.1.16.6.4,RMON2-MIB::matrixControl2Table,,not-accessible,,current,,Contains the RMON-2 augmentations to RMON-1.
.1.3.6.1.2.1.16.6.4.1,RMON2-MIB::matrixControl2Entry,,not-accessible,,current,,Contains the RMON-2 augmentations to RMON-1.
.1.3.6.1.2.1.16.6.4.1.1,RMON2-MIB::matrixControlDroppedFrames,Counter32,read-only,,current,,The total number of frames that were received by the probe and therefore not accounted for in the *StatsDropEvents, but that the probe chose not to count for this entry for whatever reason. Most often, this event occurs when the probe is out of some resources and decides to shed load from this collection. This count does not include packets that were not counted because they had MAC-layer errors. Note that, unlike the dropEvents counter, this number is the exact number of frames dropped.
.1.3.6.1.2.1.16.6.4.1.2,RMON2-MIB::matrixControlCreateTime,TimeTicks,read-only,,current,,The value of sysUpTime when this control entry was last activated. This can be used by the management station to ensure that the table has not been deleted and recreated between polls.
.1.3.6.1.2.1.16.7,RMON-MIB::filter,,,,,,
.1.3.6.1.2.1.16.7.1,RMON-MIB::filterTable,,not-accessible,,current,,A list of packet filter entries.
.1.3.6.1.2.1.16.7.1.1,RMON-MIB::filterEntry,,not-accessible,filterIndex,current,,A set of parameters for a packet filter applied on a particular interface. As an example, an instance of the filterPktData object might be named filterPktData.12
.1.3.6.1.2.1.16.7.1.1.1,RMON-MIB::filterIndex,Integer32,read-only,,current,,An index that uniquely identifies an entry in the filter table. Each such entry defines one filter that is to be applied to every packet received on an interface.
.1.3.6.1.2.1.16.7.1.1.2,RMON-MIB::filterChannelIndex,Integer32,read-create,,current,,This object identifies the channel of which this filter is a part. The filters identified by a particular value of this object are associated with the same channel as identified by the same value of the channelIndex object.
.1.3.6.1.2.1.16.7.1.1.3,RMON-MIB::filterPktDataOffset,Integer32,read-create,,current,,The offset from the beginning of each packet where a match of packet data will be attempted. This offset is measured from the point in the physical layer packet after the framing bits, if any. For example, in an Ethernet frame, this point is at the beginning of the destination MAC address. This object may not be modified if the associated filterStatus object is equal to valid(1).
.1.3.6.1.2.1.16.7.1.1.4,RMON-MIB::filterPktData,OCTET,read-create,,current,,The data that is to be matched with the input packet. For each packet received, this filter and the accompanying filterPktDataMask and filterPktDataNotMask will be adjusted for the offset. The only bits relevant to this match algorithm are those that have the corresponding filterPktDataMask bit equal to one. The following three rules are then applied to every packet: (1) If the packet is too short and does not have data corresponding to part of the filterPktData, the packet will fail this data match. (2) For each relevant bit from the packet with the corresponding filterPktDataNotMask bit set to zero, if the bit from the packet is not equal to the corresponding bit from the filterPktData, then the packet will fail this data match. (3) If for every relevant bit from the packet with the corresponding filterPktDataNotMask bit set to one, the bit from the packet is equal to the corresponding bit from the filterPktData, then the packet will fail this data match. Any packets that have not failed any of the three matches above have passed this data match. In particular, a zero length filter will match any packet. This object may not be modified if the associated filterStatus object is equal to valid(1).
.1.3.6.1.2.1.16.7.1.1.5,RMON-MIB::filterPktDataMask,OCTET,read-create,,current,,The mask that is applied to the match process. After adjusting this mask for the offset, only those bits in the received packet that correspond to bits set in this mask are relevant for further processing by the match algorithm. The offset is applied to filterPktDataMask in the same way it is applied to the filter. For the purposes of the matching algorithm, if the associated filterPktData object is longer than this mask, this mask is conceptually extended with '1' bits until it reaches the length of the filterPktData object. This object may not be modified if the associated filterStatus object is equal to valid(1).
.1.3.6.1.2.1.16.7.1.1.6,RMON-MIB::filterPktDataNotMask,OCTET,read-create,,current,,The inversion mask that is applied to the match process. After adjusting this mask for the offset, those relevant bits in the received packet that correspond to bits cleared in this mask must all be equal to their corresponding bits in the filterPktData object for the packet to be accepted. In addition, at least one of those relevant bits in the received packet that correspond to bits set in this mask must be different to its corresponding bit in the filterPktData object. For the purposes of the matching algorithm, if the associated filterPktData object is longer than this mask, this mask is conceptually extended with '0' bits until it reaches the length of the filterPktData object. This object may not be modified if the associated filterStatus object is equal to valid(1).
.1.3.6.1.2.1.16.7.1.1.7,RMON-MIB::filterPktStatus,Integer32,read-create,,current,,The status that is to be matched with the input packet. The only bits relevant to this match algorithm are those that have the corresponding filterPktStatusMask bit equal to one. The following two rules are then applied to every packet: (1) For each relevant bit from the packet status with the corresponding filterPktStatusNotMask bit set to zero, if the bit from the packet status is not equal to the corresponding bit from the filterPktStatus, then the packet will fail this status match. (2) If for every relevant bit from the packet status with the corresponding filterPktStatusNotMask bit set to one, the bit from the packet status is equal to the corresponding bit from the filterPktStatus, then the packet will fail this status match. Any packets that have not failed either of the two matches above have passed this status match. In particular, a zero length status filter will match any packet's status. The value of the packet status is a sum. This sum initially takes the value zero. Then, for each error, E, that has been discovered in this packet, 2 raised to a value representing E is added to the sum. The errors and the bits that represent them are dependent on the media type of the interface that this channel is receiving packets from. The errors defined for a packet captured off of an Ethernet interface are as follows: bit # Error 0 Packet is longer than 1518 octets 1 Packet is shorter than 64 octets 2 Packet experienced a CRC or Alignment error For example, an Ethernet fragment would have a value of 6 (2^1 + 2^2). As this MIB is expanded to new media types, this object will have other media-specific errors defined. For the purposes of this status matching algorithm, if the packet status is longer than this filterPktStatus object, this object is conceptually extended with '0' bits until it reaches the size of the packet status. This object may not be modified if the associated filterStatus object is equal to valid(1).
.1.3.6.1.2.1.16.7.1.1.8,RMON-MIB::filterPktStatusMask,Integer32,read-create,,current,,The mask that is applied to the status match process. Only those bits in the received packet that correspond to bits set in this mask are relevant for further processing by the status match algorithm. For the purposes of the matching algorithm, if the associated filterPktStatus object is longer than this mask, this mask is conceptually extended with '1' bits until it reaches the size of the filterPktStatus. In addition, if a packet status is longer than this mask, this mask is conceptually extended with '0' bits until it reaches the size of the packet status. This object may not be modified if the associated filterStatus object is equal to valid(1).
.1.3.6.1.2.1.16.7.1.1.9,RMON-MIB::filterPktStatusNotMask,Integer32,read-create,,current,,The inversion mask that is applied to the status match process. Those relevant bits in the received packet status that correspond to bits cleared in this mask must all be equal to their corresponding bits in the filterPktStatus object for the packet to be accepted. In addition, at least one of those relevant bits in the received packet status that correspond to bits set in this mask must be different to its corresponding bit in the filterPktStatus object for the packet to be accepted. For the purposes of the matching algorithm, if the associated filterPktStatus object or a packet status is longer than this mask, this mask is conceptually extended with '0' bits until it reaches the longer of the lengths of the filterPktStatus object and the packet status. This object may not be modified if the associated filterStatus object is equal to valid(1).
.1.3.6.1.2.1.16.7.1.1.10,RMON-MIB::filterOwner,OCTET,read-create,,current,,The entity that configured this entry and is therefore using the resources assigned to it.
.1.3.6.1.2.1.16.7.1.1.11,RMON-MIB::filterStatus,INTEGER,read-create,,current,valid(1):createRequest(2):underCreation(3):invalid(4),The status of this filter entry.
.1.3.6.1.2.1.16.7.2,RMON-MIB::channelTable,,not-accessible,,current,,A list of packet channel entries.
.1.3.6.1.2.1.16.7.2.1,RMON-MIB::channelEntry,,not-accessible,channelIndex,current,,A set of parameters for a packet channel applied on a particular interface. As an example, an instance of the channelMatches object might be named channelMatches.3
.1.3.6.1.2.1.16.7.2.1.1,RMON-MIB::channelIndex,Integer32,read-only,,current,,An index that uniquely identifies an entry in the channel table. Each such entry defines one channel, a logical data and event stream. It is suggested that before creating a channel, an application should scan all instances of the filterChannelIndex object to make sure that there are no pre-existing filters that would be inadvertently be linked to the channel.
.1.3.6.1.2.1.16.7.2.1.2,RMON-MIB::channelIfIndex,Integer32,read-create,,current,,The value of this object uniquely identifies the interface on this remote network monitoring device to which the associated filters are applied to allow data into this channel. The interface identified by a particular value of this object is the same interface as identified by the same value of the ifIndex object, defined in RFC 2233 [17]. The filters in this group are applied to all packets on the local network segment attached to the identified interface. An agent may or may not be able to tell if fundamental changes to the media of the interface have occurred and necessitate an invalidation of this entry. For example, a hot-pluggable ethernet card could be pulled out and replaced by a token-ring card. In such a case, if the agent has such knowledge of the change, it is recommended that it invalidate this entry. This object may not be modified if the associated channelStatus object is equal to valid(1).
.1.3.6.1.2.1.16.7.2.1.3,RMON-MIB::channelAcceptType,INTEGER,read-create,,current,acceptMatched(1):acceptFailed(2),This object controls the action of the filters associated with this channel. If this object is equal to acceptMatched(1), packets will be accepted to this channel if they are accepted by both the packet data and packet status matches of an associated filter. If this object is equal to acceptFailed(2), packets will be accepted to this channel only if they fail either the packet data match or the packet status match of each of the associated filters. In particular, a channel with no associated filters will match no packets if set to acceptMatched(1) case and will match all packets in the acceptFailed(2) case. This object may not be modified if the associated channelStatus object is equal to valid(1).
.1.3.6.1.2.1.16.7.2.1.4,RMON-MIB::channelDataControl,INTEGER,read-create,,current,on(1):off(2),This object controls the flow of data through this channel. If this object is on(1), data, status and events flow through this channel. If this object is off(2), data, status and events will not flow through this channel.
.1.3.6.1.2.1.16.7.2.1.5,RMON-MIB::channelTurnOnEventIndex,Integer32,read-create,,current,,The value of this object identifies the event that is configured to turn the associated channelDataControl from off to on when the event is generated. The event identified by a particular value of this object is the same event as identified by the same value of the eventIndex object. If there is no corresponding entry in the eventTable, then no association exists. In fact, if no event is intended for this channel, channelTurnOnEventIndex must be set to zero, a non-existent event index. This object may not be modified if the associated channelStatus object is equal to valid(1).
.1.3.6.1.2.1.16.7.2.1.6,RMON-MIB::channelTurnOffEventIndex,Integer32,read-create,,current,,The value of this object identifies the event that is configured to turn the associated channelDataControl from on to off when the event is generated. The event identified by a particular value of this object is the same event as identified by the same value of the eventIndex object. If there is no corresponding entry in the eventTable, then no association exists. In fact, if no event is intended for this channel, channelTurnOffEventIndex must be set to zero, a non-existent event index. This object may not be modified if the associated channelStatus object is equal to valid(1).
.1.3.6.1.2.1.16.7.2.1.7,RMON-MIB::channelEventIndex,Integer32,read-create,,current,,The value of this object identifies the event that is configured to be generated when the associated channelDataControl is on and a packet is matched. The event identified by a particular value of this object is the same event as identified by the same value of the eventIndex object. If there is no corresponding entry in the eventTable, then no association exists. In fact, if no event is intended for this channel, channelEventIndex must be set to zero, a non-existent event index. This object may not be modified if the associated channelStatus object is equal to valid(1).
.1.3.6.1.2.1.16.7.2.1.8,RMON-MIB::channelEventStatus,INTEGER,read-create,,current,eventReady(1):eventFired(2):eventAlwaysReady(3),The event status of this channel. If this channel is configured to generate events when packets are matched, a means of controlling the flow of those events is often needed. When this object is equal to eventReady(1), a single event may be generated, after which this object will be set by the probe to eventFired(2). While in the eventFired(2) state, no events will be generated until the object is modified to eventReady(1) (or eventAlwaysReady(3)). The management station can thus easily respond to a notification of an event by re-enabling this object. If the management station wishes to disable this flow control and allow events to be generated at will, this object may be set to eventAlwaysReady(3). Disabling the flow control is discouraged as it can result in high network traffic or other performance problems.
.1.3.6.1.2.1.16.7.2.1.9,RMON-MIB::channelMatches,Counter32,read-only,,current,,The number of times this channel has matched a packet. Note that this object is updated even when channelDataControl is set to off.
.1.3.6.1.2.1.16.7.2.1.10,RMON-MIB::channelDescription,OCTET,read-create,,current,,A comment describing this channel.
.1.3.6.1.2.1.16.7.2.1.11,RMON-MIB::channelOwner,OCTET,read-create,,current,,The entity that configured this entry and is therefore using the resources assigned to it.
.1.3.6.1.2.1.16.7.2.1.12,RMON-MIB::channelStatus,INTEGER,read-create,,current,valid(1):createRequest(2):underCreation(3):invalid(4),The status of this channel entry.
.1.3.6.1.2.1.16.7.3,RMON2-MIB::channel2Table,,not-accessible,,current,,Contains the RMON-2 augmentations to RMON-1.
.1.3.6.1.2.1.16.7.3.1,RMON2-MIB::channel2Entry,,not-accessible,,current,,Contains the RMON-2 augmentations to RMON-1.
.1.3.6.1.2.1.16.7.3.1.1,RMON2-MIB::channelDroppedFrames,Counter32,read-only,,current,,The total number of frames that were received by the probe and therefore not accounted for in the *StatsDropEvents, but that the probe chose not to count for this entry for whatever reason. Most often, this event occurs when the probe is out of some resources and decides to shed load from this collection. This count does not include packets that were not counted because they had MAC-layer errors. Note that, unlike the dropEvents counter, this number is the exact number of frames dropped.
.1.3.6.1.2.1.16.7.3.1.2,RMON2-MIB::channelCreateTime,TimeTicks,read-only,,current,,The value of sysUpTime when this control entry was last activated. This can be used by the management station to ensure that the table has not been deleted and recreated between polls.
.1.3.6.1.2.1.16.7.4,RMON2-MIB::filter2Table,,not-accessible,,current,,Provides a variable-length packet filter feature to the RMON-1 filter table.
.1.3.6.1.2.1.16.7.4.1,RMON2-MIB::filter2Entry,,not-accessible,,current,,Provides a variable-length packet filter feature to the RMON-1 filter table.
.1.3.6.1.2.1.16.7.4.1.1,RMON2-MIB::filterProtocolDirDataLocalIndex,Integer32,read-create,,current,,When this object is set to a non-zero value, the filter that it is associated with performs the following operations on every packet: 1) If the packet doesn't match the protocol directory entry identified by this object, discard the packet and exit (i.e., discard the packet if it is not of the identified protocol). 2) If the associated filterProtocolDirLocalIndex is non-zero and the packet doesn't match the protocol directory entry identified by that object, discard the packet and exit. 3) If the packet matches, perform the regular filter algorithm as if the beginning of this named protocol is the beginning of the packet, potentially applying the filterOffset value to move further into the packet.
.1.3.6.1.2.1.16.7.4.1.2,RMON2-MIB::filterProtocolDirLocalIndex,Integer32,read-create,,current,,When this object is set to a non-zero value, the filter that it is associated with will discard the packet if the packet doesn't match this protocol directory entry.
.1.3.6.1.2.1.16.8,RMON-MIB::capture,,,,,,
.1.3.6.1.2.1.16.8.1,RMON-MIB::bufferControlTable,,not-accessible,,current,,A list of buffers control entries.
.1.3.6.1.2.1.16.8.1.1,RMON-MIB::bufferControlEntry,,not-accessible,bufferControlIndex,current,,A set of parameters that control the collection of a stream of packets that have matched filters. As an example, an instance of the bufferControlCaptureSliceSize object might be named bufferControlCaptureSliceSize.3
.1.3.6.1.2.1.16.8.1.1.1,RMON-MIB::bufferControlIndex,Integer32,read-only,,current,,An index that uniquely identifies an entry in the bufferControl table. The value of this index shall never be zero. Each such entry defines one set of packets that is captured and controlled by one or more filters.
.1.3.6.1.2.1.16.8.1.1.2,RMON-MIB::bufferControlChannelIndex,Integer32,read-create,,current,,An index that identifies the channel that is the source of packets for this bufferControl table. The channel identified by a particular value of this index is the same as identified by the same value of the channelIndex object. This object may not be modified if the associated bufferControlStatus object is equal to valid(1).
.1.3.6.1.2.1.16.8.1.1.3,RMON-MIB::bufferControlFullStatus,INTEGER,read-only,,current,spaceAvailable(1):full(2),This object shows whether the buffer has room to accept new packets or if it is full. If the status is spaceAvailable(1), the buffer is accepting new packets normally. If the status is full(2) and the associated bufferControlFullAction object is wrapWhenFull, the buffer is accepting new packets by deleting enough of the oldest packets to make room for new ones as they arrive. Otherwise, if the status is full(2) and the bufferControlFullAction object is lockWhenFull, then the buffer has stopped collecting packets. When this object is set to full(2) the probe must not later set it to spaceAvailable(1) except in the case of a significant gain in resources such as an increase of bufferControlOctetsGranted. In particular, the wrap-mode action of deleting old packets to make room for newly arrived packets must not affect the value of this object.
.1.3.6.1.2.1.16.8.1.1.4,RMON-MIB::bufferControlFullAction,INTEGER,read-create,,current,lockWhenFull(1):wrapWhenFull(2),Controls the action of the buffer when it reaches the full status. When in the lockWhenFull(1) state and a packet is added to the buffer that fills the buffer, the bufferControlFullStatus will be set to full(2) and this buffer will stop capturing packets.
.1.3.6.1.2.1.16.8.1.1.5,RMON-MIB::bufferControlCaptureSliceSize,Integer32,read-create,,current,,The maximum number of octets of each packet that will be saved in this capture buffer. For example, if a 1500 octet packet is received by the probe and this object is set to 500, then only 500 octets of the packet will be stored in the associated capture buffer. If this variable is set to 0, the capture buffer will save as many octets as is possible. This object may not be modified if the associated bufferControlStatus object is equal to valid(1).
.1.3.6.1.2.1.16.8.1.1.6,RMON-MIB::bufferControlDownloadSliceSize,Integer32,read-create,,current,,The maximum number of octets of each packet in this capture buffer that will be returned in an SNMP retrieval of that packet. For example, if 500 octets of a packet have been stored in the associated capture buffer, the associated bufferControlDownloadOffset is 0, and this object is set to 100, then the captureBufferPacket object that contains the packet will contain only the first 100 octets of the packet. A prudent manager will take into account possible interoperability or fragmentation problems that may occur if the download slice size is set too large. In particular, conformant SNMP implementations are not required to accept messages whose length exceeds 484 octets, although they are encouraged to support larger datagrams whenever feasible.
.1.3.6.1.2.1.16.8.1.1.7,RMON-MIB::bufferControlDownloadOffset,Integer32,read-create,,current,,The offset of the first octet of each packet in this capture buffer that will be returned in an SNMP retrieval of that packet. For example, if 500 octets of a packet have been stored in the associated capture buffer and this object is set to 100, then the captureBufferPacket object that contains the packet will contain bytes starting 100 octets into the packet.
.1.3.6.1.2.1.16.8.1.1.8,RMON-MIB::bufferControlMaxOctetsRequested,Integer32,read-create,,current,,The requested maximum number of octets to be saved in this captureBuffer, including any implementation-specific overhead. If this variable is set to -1, the capture buffer will save as many octets as is possible. When this object is created or modified, the probe should set bufferControlMaxOctetsGranted as closely to this object as is possible for the particular probe implementation and available resources. However, if the object has the special value of -1, the probe must set bufferControlMaxOctetsGranted to -1.
.1.3.6.1.2.1.16.8.1.1.9,RMON-MIB::bufferControlMaxOctetsGranted,Integer32,read-only,,current,,The maximum number of octets that can be saved in this captureBuffer, including overhead. If this variable is -1, the capture buffer will save as many octets as possible. When the bufferControlMaxOctetsRequested object is created or modified, the probe should set this object as closely to the requested value as is possible for the particular probe implementation and available resources. However, if the request object has the special value of -1, the probe must set this object to -1. The probe must not lower this value except as a result of a modification to the associated bufferControlMaxOctetsRequested object. When this maximum number of octets is reached and a new packet is to be added to this capture buffer and the corresponding bufferControlFullAction is set to wrapWhenFull(2), enough of the oldest packets associated with this capture buffer shall be deleted by the agent so that the new packet can be added. If the corresponding bufferControlFullAction is set to lockWhenFull(1), the new packet shall be discarded. In either case, the probe must set bufferControlFullStatus to full(2). When the value of this object changes to a value less than the current value, entries are deleted from the captureBufferTable associated with this bufferControlEntry. Enough of the oldest of these captureBufferEntries shall be deleted by the agent so that the number of octets used remains less than or equal to the new value of this object. When the value of this object changes to a value greater than the current value, the number of associated captureBufferEntries may be allowed to grow.
.1.3.6.1.2.1.16.8.1.1.10,RMON-MIB::bufferControlCapturedPackets,Integer32,read-only,,current,,The number of packets currently in this captureBuffer.
.1.3.6.1.2.1.16.8.1.1.11,RMON-MIB::bufferControlTurnOnTime,TimeTicks,read-only,,current,,The value of sysUpTime when this capture buffer was first turned on.
.1.3.6.1.2.1.16.8.1.1.12,RMON-MIB::bufferControlOwner,OCTET,read-create,,current,,The entity that configured this entry and is therefore using the resources assigned to it.
.1.3.6.1.2.1.16.8.1.1.13,RMON-MIB::bufferControlStatus,INTEGER,read-create,,current,valid(1):createRequest(2):underCreation(3):invalid(4),The status of this buffer Control Entry.
.1.3.6.1.2.1.16.8.2,RMON-MIB::captureBufferTable,,not-accessible,,current,,A list of packets captured off of a channel.
.1.3.6.1.2.1.16.8.2.1,RMON-MIB::captureBufferEntry,,not-accessible,captureBufferControlIndex:captureBufferIndex,current,,A packet captured off of an attached network. As an example, an instance of the captureBufferPacketData object might be named captureBufferPacketData.3.1783
.1.3.6.1.2.1.16.8.2.1.1,RMON-MIB::captureBufferControlIndex,Integer32,read-only,,current,,The index of the bufferControlEntry with which this packet is associated.
.1.3.6.1.2.1.16.8.2.1.2,RMON-MIB::captureBufferIndex,Integer32,read-only,,current,,An index that uniquely identifies an entry in the captureBuffer table associated with a particular bufferControlEntry. This index will start at 1 and increase by one for each new packet added with the same captureBufferControlIndex. Should this value reach 2147483647, the next packet added with the same captureBufferControlIndex shall cause this value to wrap around to 1.
.1.3.6.1.2.1.16.8.2.1.3,RMON-MIB::captureBufferPacketID,Integer32,read-only,,current,,An index that describes the order of packets that are received on a particular interface. The packetID of a packet captured on an interface is defined to be greater than the packetID's of all packets captured previously on the same interface. As the captureBufferPacketID object has a maximum positive value of 2^31 - 1, any captureBufferPacketID object shall have the value of the associated packet's packetID mod 2^31.
.1.3.6.1.2.1.16.8.2.1.4,RMON-MIB::captureBufferPacketData,OCTET,read-only,,current,,The data inside the packet, starting at the beginning of the packet plus any offset specified in the associated bufferControlDownloadOffset, including any link level headers. The length of the data in this object is the minimum of the length of the captured packet minus the offset, the length of the associated bufferControlCaptureSliceSize minus the offset, and the associated bufferControlDownloadSliceSize. If this minimum is less than zero, this object shall have a length of zero.
.1.3.6.1.2.1.16.8.2.1.5,RMON-MIB::captureBufferPacketLength,Integer32,read-only,,current,,The actual length (off the wire) of the packet stored in this entry, including FCS octets.
.1.3.6.1.2.1.16.8.2.1.6,RMON-MIB::captureBufferPacketTime,Integer32,read-only,,current,,The number of milliseconds that had passed since this capture buffer was first turned on when this packet was captured.
.1.3.6.1.2.1.16.8.2.1.7,RMON-MIB::captureBufferPacketStatus,Integer32,read-only,,current,,A value which indicates the error status of this packet. The value of this object is defined in the same way as filterPktStatus. The value is a sum. This sum initially takes the value zero. Then, for each error, E, that has been discovered in this packet, 2 raised to a value representing E is added to the sum. The errors defined for a packet captured off of an Ethernet interface are as follows: bit # Error 0 Packet is longer than 1518 octets 1 Packet is shorter than 64 octets 2 Packet experienced a CRC or Alignment error 3 First packet in this capture buffer after it was detected that some packets were not processed correctly. 4 Packet's order in buffer is only approximate (May only be set for packets sent from the probe) For example, an Ethernet fragment would have a value of 6 (2^1 + 2^2). As this MIB is expanded to new media types, this object will have other media-specific errors defined.
.1.3.6.1.2.1.16.9,RMON-MIB::event,,,,,,
.1.3.6.1.2.1.16.9.1,RMON-MIB::eventTable,,not-accessible,,current,,A list of events to be generated.
.1.3.6.1.2.1.16.9.1.1,RMON-MIB::eventEntry,,not-accessible,eventIndex,current,,A set of parameters that describe an event to be generated when certain conditions are met. As an example, an instance of the eventLastTimeSent object might be named eventLastTimeSent.6
.1.3.6.1.2.1.16.9.1.1.1,RMON-MIB::eventIndex,Integer32,read-only,,current,,An index that uniquely identifies an entry in the event table. Each such entry defines one event that is to be generated when the appropriate conditions occur.
.1.3.6.1.2.1.16.9.1.1.2,RMON-MIB::eventDescription,OCTET,read-create,,current,,A comment describing this event entry.
.1.3.6.1.2.1.16.9.1.1.3,RMON-MIB::eventType,INTEGER,read-create,,current,none(1):log(2):snmptrap(3):logandtrap(4),The type of notification that the probe will make about this event. In the case of log, an entry is made in the log table for each event. In the case of snmp-trap, an SNMP trap is sent to one or more management stations.
.1.3.6.1.2.1.16.9.1.1.4,RMON-MIB::eventCommunity,OCTET,read-create,,current,,If an SNMP trap is to be sent, it will be sent to the SNMP community specified by this octet string.
.1.3.6.1.2.1.16.9.1.1.5,RMON-MIB::eventLastTimeSent,TimeTicks,read-only,,current,,The value of sysUpTime at the time this event entry last generated an event. If this entry has not generated any events, this value will be zero.
.1.3.6.1.2.1.16.9.1.1.6,RMON-MIB::eventOwner,OCTET,read-create,,current,,The entity that configured this entry and is therefore using the resources assigned to it. If this object contains a string starting with 'monitor' and has associated entries in the log table, all connected management stations should retrieve those log entries, as they may have significance to all management stations connected to this device
.1.3.6.1.2.1.16.9.1.1.7,RMON-MIB::eventStatus,INTEGER,read-create,,current,valid(1):createRequest(2):underCreation(3):invalid(4),The status of this event entry. If this object is not equal to valid(1), all associated log entries shall be deleted by the agent.
.1.3.6.1.2.1.16.9.2,RMON-MIB::logTable,,not-accessible,,current,,A list of events that have been logged.
.1.3.6.1.2.1.16.9.2.1,RMON-MIB::logEntry,,not-accessible,logEventIndex:logIndex,current,,A set of data describing an event that has been logged. For example, an instance of the logDescription object might be named logDescription.6.47
.1.3.6.1.2.1.16.9.2.1.1,RMON-MIB::logEventIndex,Integer32,read-only,,current,,The event entry that generated this log entry. The log identified by a particular value of this index is associated with the same eventEntry as identified by the same value of eventIndex.
.1.3.6.1.2.1.16.9.2.1.2,RMON-MIB::logIndex,Integer32,read-only,,current,,An index that uniquely identifies an entry in the log table amongst those generated by the same eventEntries. These indexes are assigned beginning with 1 and increase by one with each new log entry. The association between values of logIndex and logEntries is fixed for the lifetime of each logEntry. The agent may choose to delete the oldest instances of logEntry as required because of lack of memory. It is an implementation-specific matter as to when this deletion may occur.
.1.3.6.1.2.1.16.9.2.1.3,RMON-MIB::logTime,TimeTicks,read-only,,current,,The value of sysUpTime when this log entry was created.
.1.3.6.1.2.1.16.9.2.1.4,RMON-MIB::logDescription,OCTET,read-only,,current,,An implementation dependent description of the event that activated this log entry.
.1.3.6.1.2.1.16.10,TOKEN-RING-RMON-MIB::tokenRing,,,,,,
.1.3.6.1.2.1.16.10.1,TOKEN-RING-RMON-MIB::ringStationControlTable,,not-accessible,,mandatory,,A list of ringStation table control entries.
.1.3.6.1.2.1.16.10.1.1,TOKEN-RING-RMON-MIB::ringStationControlEntry,,not-accessible,ringStationControlIfIndex,mandatory,,A list of parameters that set up the discovery of stations on a particular interface and the collection of statistics about these stations.
.1.3.6.1.2.1.16.10.1.1.1,TOKEN-RING-RMON-MIB::ringStationControlIfIndex,INTEGER,read-only,,mandatory,,The value of this object uniquely identifies the interface on this remote network monitoring device from which ringStation data is collected. The interface identified by a particular value of this object is the same interface as identified by the same value of the ifIndex object, defined in MIB- II [3].
.1.3.6.1.2.1.16.10.1.1.2,TOKEN-RING-RMON-MIB::ringStationControlTableSize,INTEGER,read-only,,mandatory,,The number of ringStationEntries in the ringStationTable associated with this ringStationControlEntry.
.1.3.6.1.2.1.16.10.1.1.3,TOKEN-RING-RMON-MIB::ringStationControlActiveStations,INTEGER,read-only,,mandatory,,The number of active ringStationEntries in the ringStationTable associated with this ringStationControlEntry.
.1.3.6.1.2.1.16.10.1.1.4,TOKEN-RING-RMON-MIB::ringStationControlRingState,INTEGER,read-only,,mandatory,normalOperation(1):ringPurgeState(2):claimTokenState(3):beaconFrameStreamingState(4):beaconBitStreamingState(5):beaconRingSignalLossState(6):beaconSetRecoveryModeState(7),The current status of this ring.
.1.3.6.1.2.1.16.10.1.1.5,TOKEN-RING-RMON-MIB::ringStationControlBeaconSender,OCTET,read-only,,mandatory,,The address of the sender of the last beacon frame received by the probe on this ring. If no beacon frames have been received, this object shall be equal to six octets of zero.
.1.3.6.1.2.1.16.10.1.1.6,TOKEN-RING-RMON-MIB::ringStationControlBeaconNAUN,OCTET,read-only,,mandatory,,The address of the NAUN in the last beacon frame received by the probe on this ring. If no beacon frames have been received, this object shall be equal to six octets of zero.
.1.3.6.1.2.1.16.10.1.1.7,TOKEN-RING-RMON-MIB::ringStationControlActiveMonitor,OCTET,read-only,,mandatory,,The address of the Active Monitor on this segment. If this address is unknown, this object shall be equal to six octets of zero.
.1.3.6.1.2.1.16.10.1.1.8,TOKEN-RING-RMON-MIB::ringStationControlOrderChanges,Counter32,read-only,,mandatory,,The number of add and delete events in the ringStationOrderTable optionally associated with this ringStationControlEntry.
.1.3.6.1.2.1.16.10.1.1.9,TOKEN-RING-RMON-MIB::ringStationControlOwner,OCTET,read-write,,mandatory,,The entity that configured this entry and is therefore using the resources assigned to it.
.1.3.6.1.2.1.16.10.1.1.10,TOKEN-RING-RMON-MIB::ringStationControlStatus,INTEGER,read-write,,mandatory,valid(1):createRequest(2):underCreation(3):invalid(4),The status of this ringStationControl entry. If this object is not equal to valid(1), all associated entries in the ringStationTable shall be deleted by the agent.
.1.3.6.1.2.1.16.10.2,TOKEN-RING-RMON-MIB::ringStationTable,,not-accessible,,mandatory,,A list of ring station entries. An entry will exist for each station that is now or has previously been detected as physically present on this ring.
.1.3.6.1.2.1.16.10.2.1,TOKEN-RING-RMON-MIB::ringStationEntry,,not-accessible,ringStationIfIndex:ringStationMacAddress,mandatory,,A collection of statistics for a particular station that has been discovered on a ring monitored by this device.
.1.3.6.1.2.1.16.10.2.1.1,TOKEN-RING-RMON-MIB::ringStationIfIndex,INTEGER,read-only,,mandatory,,The value of this object uniquely identifies the interface on this remote network monitoring device on which this station was detected. The interface identified by a particular value of this object is the same interface as identified by the same value of the ifIndex object, defined in MIB-II [3].
.1.3.6.1.2.1.16.10.2.1.2,TOKEN-RING-RMON-MIB::ringStationMacAddress,OCTET,read-only,,mandatory,,The physical address of this station.
.1.3.6.1.2.1.16.10.2.1.3,TOKEN-RING-RMON-MIB::ringStationLastNAUN,OCTET,read-only,,mandatory,,The physical address of last known NAUN of this station.
.1.3.6.1.2.1.16.10.2.1.4,TOKEN-RING-RMON-MIB::ringStationStationStatus,INTEGER,read-only,,mandatory,active(1):inactive(2):forcedRemoval(3),The status of this station on the ring.
.1.3.6.1.2.1.16.10.2.1.5,TOKEN-RING-RMON-MIB::ringStationLastEnterTime,TimeTicks,read-only,,mandatory,,The value of sysUpTime at the time this station last entered the ring. If the time is unknown, this value shall be zero.
.1.3.6.1.2.1.16.10.2.1.6,TOKEN-RING-RMON-MIB::ringStationLastExitTime,TimeTicks,read-only,,mandatory,,The value of sysUpTime at the time the probe detected that this station last exited the ring. If the time is unknown, this value shall be zero.
.1.3.6.1.2.1.16.10.2.1.7,TOKEN-RING-RMON-MIB::ringStationDuplicateAddresses,Counter32,read-only,,mandatory,,The number of times this station experienced a duplicate address error.
.1.3.6.1.2.1.16.10.2.1.8,TOKEN-RING-RMON-MIB::ringStationInLineErrors,Counter32,read-only,,mandatory,,The total number of line errors reported by this station in error reporting packets detected by the probe.
.1.3.6.1.2.1.16.10.2.1.9,TOKEN-RING-RMON-MIB::ringStationOutLineErrors,Counter32,read-only,,mandatory,,The total number of line errors reported in error reporting packets sent by the nearest active downstream neighbor of this station and detected by the probe.
.1.3.6.1.2.1.16.10.2.1.10,TOKEN-RING-RMON-MIB::ringStationInternalErrors,Counter32,read-only,,mandatory,,The total number of adapter internal errors reported by this station in error reporting packets detected by the probe.
.1.3.6.1.2.1.16.10.2.1.11,TOKEN-RING-RMON-MIB::ringStationInBurstErrors,Counter32,read-only,,mandatory,,The total number of burst errors reported by this station in error reporting packets detected by the probe.
.1.3.6.1.2.1.16.10.2.1.12,TOKEN-RING-RMON-MIB::ringStationOutBurstErrors,Counter32,read-only,,mandatory,,The total number of burst errors reported in error reporting packets sent by the nearest active downstream neighbor of this station and detected by the probe.
.1.3.6.1.2.1.16.10.2.1.13,TOKEN-RING-RMON-MIB::ringStationACErrors,Counter32,read-only,,mandatory,,The total number of AC (Address Copied) errors reported in error reporting packets sent by the nearest active downstream neighbor of this station and detected by the probe.
.1.3.6.1.2.1.16.10.2.1.14,TOKEN-RING-RMON-MIB::ringStationAbortErrors,Counter32,read-only,,mandatory,,The total number of abort delimiters reported by this station in error reporting packets detected by the probe.
.1.3.6.1.2.1.16.10.2.1.15,TOKEN-RING-RMON-MIB::ringStationLostFrameErrors,Counter32,read-only,,mandatory,,The total number of lost frame errors reported by this station in error reporting packets detected by the probe.
.1.3.6.1.2.1.16.10.2.1.16,TOKEN-RING-RMON-MIB::ringStationCongestionErrors,Counter32,read-only,,mandatory,,The total number of receive congestion errors reported by this station in error reporting packets detected by the probe.
.1.3.6.1.2.1.16.10.2.1.17,TOKEN-RING-RMON-MIB::ringStationFrameCopiedErrors,Counter32,read-only,,mandatory,,The total number of frame copied errors reported by this station in error reporting packets detected by the probe.
.1.3.6.1.2.1.16.10.2.1.18,TOKEN-RING-RMON-MIB::ringStationFrequencyErrors,Counter32,read-only,,mandatory,,The total number of frequency errors reported by this station in error reporting packets detected by the probe.
.1.3.6.1.2.1.16.10.2.1.19,TOKEN-RING-RMON-MIB::ringStationTokenErrors,Counter32,read-only,,mandatory,,The total number of token errors reported by this station in error reporting frames detected by the probe.
.1.3.6.1.2.1.16.10.2.1.20,TOKEN-RING-RMON-MIB::ringStationInBeaconErrors,Counter32,read-only,,mandatory,,The total number of beacon frames sent by this station and detected by the probe.
.1.3.6.1.2.1.16.10.2.1.21,TOKEN-RING-RMON-MIB::ringStationOutBeaconErrors,Counter32,read-only,,mandatory,,The total number of beacon frames detected by the probe that name this station as the NAUN.
.1.3.6.1.2.1.16.10.2.1.22,TOKEN-RING-RMON-MIB::ringStationInsertions,Counter32,read-only,,mandatory,,The number of times the probe detected this station inserting onto the ring.
.1.3.6.1.2.1.16.10.3,TOKEN-RING-RMON-MIB::ringStationOrderTable,,not-accessible,,mandatory,,A list of ring station entries for stations in the ring poll, ordered by their ring-order.
.1.3.6.1.2.1.16.10.3.1,TOKEN-RING-RMON-MIB::ringStationOrderEntry,,not-accessible,ringStationOrderIfIndex:ringStationOrderOrderIndex,mandatory,,A collection of statistics for a particular station that is active on a ring monitored by this device. This table will contain information for every interface that has a ringStationControlStatus equal to valid.
.1.3.6.1.2.1.16.10.3.1.1,TOKEN-RING-RMON-MIB::ringStationOrderIfIndex,INTEGER,read-only,,mandatory,,The value of this object uniquely identifies the interface on this remote network monitoring device on which this station was detected. The interface identified by a particular value of this object is the same interface as identified by the same value of the ifIndex object, defined in MIB-II [3].
.1.3.6.1.2.1.16.10.3.1.2,TOKEN-RING-RMON-MIB::ringStationOrderOrderIndex,INTEGER,read-only,,mandatory,,This index denotes the location of this station with respect to other stations on the ring. This index is one more than the number of hops downstream that this station is from the rmon probe. The rmon probe itself gets the value one.
.1.3.6.1.2.1.16.10.3.1.3,TOKEN-RING-RMON-MIB::ringStationOrderMacAddress,OCTET,read-only,,mandatory,,The physical address of this station.
.1.3.6.1.2.1.16.10.4,TOKEN-RING-RMON-MIB::ringStationConfigControlTable,,not-accessible,,mandatory,,A list of ring station configuration control entries.
.1.3.6.1.2.1.16.10.4.1,TOKEN-RING-RMON-MIB::ringStationConfigControlEntry,,not-accessible,ringStationConfigControlIfIndex:ringStationConfigControlMacAddress,mandatory,,This entry controls active management of stations by the probe. One entry exists in this table for each active station in the ringStationTable.
.1.3.6.1.2.1.16.10.4.1.1,TOKEN-RING-RMON-MIB::ringStationConfigControlIfIndex,INTEGER,read-only,,mandatory,,The value of this object uniquely identifies the interface on this remote network monitoring device on which this station was detected. The interface identified by a particular value of this object is the same interface as identified by the same value of the ifIndex object, defined in MIB-II [3].
.1.3.6.1.2.1.16.10.4.1.2,TOKEN-RING-RMON-MIB::ringStationConfigControlMacAddress,OCTET,read-only,,mandatory,,The physical address of this station.
.1.3.6.1.2.1.16.10.4.1.3,TOKEN-RING-RMON-MIB::ringStationConfigControlRemove,INTEGER,read-write,,mandatory,stable(1):removing(2),Setting this object to `removing(2)' causes a Remove Station MAC frame to be sent. The agent will set this object to `stable(1)' after processing the request.
.1.3.6.1.2.1.16.10.4.1.4,TOKEN-RING-RMON-MIB::ringStationConfigControlUpdateStats,INTEGER,read-write,,mandatory,stable(1):updating(2),Setting this object to `updating(2)' causes the configuration information associate with this entry to be updated. The agent will set this object to `stable(1)' after processing the request.
.1.3.6.1.2.1.16.10.5,TOKEN-RING-RMON-MIB::ringStationConfigTable,,not-accessible,,mandatory,,A list of configuration entries for stations on a ring monitored by this probe.
.1.3.6.1.2.1.16.10.5.1,TOKEN-RING-RMON-MIB::ringStationConfigEntry,,not-accessible,ringStationConfigIfIndex:ringStationConfigMacAddress,mandatory,,A collection of statistics for a particular station that has been discovered on a ring monitored by this probe.
.1.3.6.1.2.1.16.10.5.1.1,TOKEN-RING-RMON-MIB::ringStationConfigIfIndex,INTEGER,read-only,,mandatory,,The value of this object uniquely identifies the interface on this remote network monitoring device on which this station was detected. The interface identified by a particular value of this object is the same interface as identified by the same value of the ifIndex object, defined in MIB-II [3].
.1.3.6.1.2.1.16.10.5.1.2,TOKEN-RING-RMON-MIB::ringStationConfigMacAddress,OCTET,read-only,,mandatory,,The physical address of this station.
.1.3.6.1.2.1.16.10.5.1.3,TOKEN-RING-RMON-MIB::ringStationConfigUpdateTime,TimeTicks,read-only,,mandatory,,The value of sysUpTime at the time this configuration information was last updated (completely).
.1.3.6.1.2.1.16.10.5.1.4,TOKEN-RING-RMON-MIB::ringStationConfigLocation,OCTET,read-only,,mandatory,,The assigned physical location of this station.
.1.3.6.1.2.1.16.10.5.1.5,TOKEN-RING-RMON-MIB::ringStationConfigMicrocode,OCTET,read-only,,mandatory,,The microcode EC level of this station.
.1.3.6.1.2.1.16.10.5.1.6,TOKEN-RING-RMON-MIB::ringStationConfigGroupAddress,OCTET,read-only,,mandatory,,The low-order 4 octets of the group address recognized by this station.
.1.3.6.1.2.1.16.10.5.1.7,TOKEN-RING-RMON-MIB::ringStationConfigFunctionalAddress,OCTET,read-only,,mandatory,,the functional addresses recognized by this station.
.1.3.6.1.2.1.16.10.6,TOKEN-RING-RMON-MIB::sourceRoutingStatsTable,,not-accessible,,mandatory,,A list of source routing statistics entries.
.1.3.6.1.2.1.16.10.6.1,TOKEN-RING-RMON-MIB::sourceRoutingStatsEntry,,not-accessible,sourceRoutingStatsIfIndex,mandatory,,A collection of source routing statistics kept for a particular Token Ring interface.
.1.3.6.1.2.1.16.10.6.1.1,TOKEN-RING-RMON-MIB::sourceRoutingStatsIfIndex,INTEGER,read-only,,mandatory,,The value of this object uniquely identifies the interface on this remote network monitoring device on which source routing statistics will be detected. The interface identified by a particular value of this object is the same interface as identified by the same value of the ifIndex object, defined in MIB-II [3].
.1.3.6.1.2.1.16.10.6.1.2,TOKEN-RING-RMON-MIB::sourceRoutingStatsRingNumber,INTEGER,read-only,,mandatory,,The ring number of the ring monitored by this entry. When any object in this entry is created, the probe will attempt to discover the ring number. Only after the ring number is discovered will this object be created. After creating an object in this entry, the management station should poll this object to detect when it is created. Only after this object is created can the management station set the sourceRoutingStatsStatus entry to valid(1).
.1.3.6.1.2.1.16.10.6.1.3,TOKEN-RING-RMON-MIB::sourceRoutingStatsInFrames,Counter32,read-only,,mandatory,,The count of frames sent into this ring from another ring.
.1.3.6.1.2.1.16.10.6.1.4,TOKEN-RING-RMON-MIB::sourceRoutingStatsOutFrames,Counter32,read-only,,mandatory,,The count of frames sent from this ring to another ring.
.1.3.6.1.2.1.16.10.6.1.5,TOKEN-RING-RMON-MIB::sourceRoutingStatsThroughFrames,Counter32,read-only,,mandatory,,The count of frames sent from another ring, through this ring, to another ring.
.1.3.6.1.2.1.16.10.6.1.6,TOKEN-RING-RMON-MIB::sourceRoutingStatsAllRoutesBroadcastFrames,Counter32,read-only,,mandatory,,The total number of good frames received that were All Routes Broadcast.
.1.3.6.1.2.1.16.10.6.1.7,TOKEN-RING-RMON-MIB::sourceRoutingStatsSingleRouteBroadcastFrames,Counter32,read-only,,mandatory,,The total number of good frames received that were Single Route Broadcast.
.1.3.6.1.2.1.16.10.6.1.8,TOKEN-RING-RMON-MIB::sourceRoutingStatsInOctets,Counter32,read-only,,mandatory,,The count of octets in good frames sent into this ring from another ring.
.1.3.6.1.2.1.16.10.6.1.9,TOKEN-RING-RMON-MIB::sourceRoutingStatsOutOctets,Counter32,read-only,,mandatory,,The count of octets in good frames sent from this ring to another ring.
.1.3.6.1.2.1.16.10.6.1.10,TOKEN-RING-RMON-MIB::sourceRoutingStatsThroughOctets,Counter32,read-only,,mandatory,,The count of octets in good frames sent another ring, through this ring, to another ring.
.1.3.6.1.2.1.16.10.6.1.11,TOKEN-RING-RMON-MIB::sourceRoutingStatsAllRoutesBroadcastOctets,Counter32,read-only,,mandatory,,The total number of octets in good frames received that were All Routes Broadcast.
.1.3.6.1.2.1.16.10.6.1.12,TOKEN-RING-RMON-MIB::sourceRoutingStatsSingleRoutesBroadcastOctets,Counter32,read-only,,mandatory,,The total number of octets in good frames received that were Single Route Broadcast.
.1.3.6.1.2.1.16.10.6.1.13,TOKEN-RING-RMON-MIB::sourceRoutingStatsLocalLLCFrames,Counter32,read-only,,mandatory,,The total number of frames received who had no RIF field (or had a RIF field that only included the local ring's number) and were not All Route Broadcast Frames.
.1.3.6.1.2.1.16.10.6.1.14,TOKEN-RING-RMON-MIB::sourceRoutingStats1HopFrames,Counter32,read-only,,mandatory,,The total number of frames received whose route had 1 hop, were not All Route Broadcast Frames, and whose source or destination were on this ring (i.e. frames that had a RIF field and had this ring number in the first or last entry of the RIF field).
.1.3.6.1.2.1.16.10.6.1.15,TOKEN-RING-RMON-MIB::sourceRoutingStats2HopsFrames,Counter32,read-only,,mandatory,,The total number of frames received whose route had 2 hops, were not All Route Broadcast Frames, and whose source or destination were on this ring (i.e. frames that had a RIF field and had this ring number in the first or last entry of the RIF field).
.1.3.6.1.2.1.16.10.6.1.16,TOKEN-RING-RMON-MIB::sourceRoutingStats3HopsFrames,Counter32,read-only,,mandatory,,The total number of frames received whose route had 3 hops, were not All Route Broadcast Frames, and whose source or destination were on this ring (i.e. frames that had a RIF field and had this ring number in the first or last entry of the RIF field).
.1.3.6.1.2.1.16.10.6.1.17,TOKEN-RING-RMON-MIB::sourceRoutingStats4HopsFrames,Counter32,read-only,,mandatory,,The total number of frames received whose route had 4 hops, were not All Route Broadcast Frames, and whose source or destination were on this ring (i.e. frames that had a RIF field and had this ring number in the first or last entry of the RIF field).
.1.3.6.1.2.1.16.10.6.1.18,TOKEN-RING-RMON-MIB::sourceRoutingStats5HopsFrames,Counter32,read-only,,mandatory,,The total number of frames received whose route had 5 hops, were not All Route Broadcast Frames, and whose source or destination were on this ring (i.e. frames that had a RIF field and had this ring number in the first or last entry of the RIF field).
.1.3.6.1.2.1.16.10.6.1.19,TOKEN-RING-RMON-MIB::sourceRoutingStats6HopsFrames,Counter32,read-only,,mandatory,,The total number of frames received whose route had 6 hops, were not All Route Broadcast Frames, and whose source or destination were on this ring (i.e. frames that had a RIF field and had this ring number in the first or last entry of the RIF field).
.1.3.6.1.2.1.16.10.6.1.20,TOKEN-RING-RMON-MIB::sourceRoutingStats7HopsFrames,Counter32,read-only,,mandatory,,The total number of frames received whose route had 7 hops, were not All Route Broadcast Frames, and whose source or destination were on this ring (i.e. frames that had a RIF field and had this ring number in the first or last entry of the RIF field).
.1.3.6.1.2.1.16.10.6.1.21,TOKEN-RING-RMON-MIB::sourceRoutingStats8HopsFrames,Counter32,read-only,,mandatory,,The total number of frames received whose route had 8 hops, were not All Route Broadcast Frames, and whose source or destination were on this ring (i.e. frames that had a RIF field and had this ring number in the first or last entry of the RIF field).
.1.3.6.1.2.1.16.10.6.1.22,TOKEN-RING-RMON-MIB::sourceRoutingStatsMoreThan8HopsFrames,Counter32,read-only,,mandatory,,The total number of frames received whose route had more than 8 hops, were not All Route Broadcast Frames, and whose source or destination were on this ring (i.e. frames that had a RIF field and had this ring number in the first or last entry of the RIF field).
.1.3.6.1.2.1.16.10.6.1.23,TOKEN-RING-RMON-MIB::sourceRoutingStatsOwner,OCTET,read-write,,mandatory,,The entity that configured this entry and is therefore using the resources assigned to it.
.1.3.6.1.2.1.16.10.6.1.24,TOKEN-RING-RMON-MIB::sourceRoutingStatsStatus,INTEGER,read-write,,mandatory,valid(1):createRequest(2):underCreation(3):invalid(4),The status of this sourceRoutingStats entry.
.1.3.6.1.2.1.16.10.7,RMON2-MIB::ringStationControl2Table,,not-accessible,,deprecated,,Contains the RMON-2 augmentations to RMON-1. This table has been deprecated, as it has not had enough independent implementations to demonstrate interoperability to meet the requirements of a Draft Standard.
.1.3.6.1.2.1.16.10.7.1,RMON2-MIB::ringStationControl2Entry,,not-accessible,,deprecated,,Contains the RMON-2 augmentations to RMON-1.
.1.3.6.1.2.1.16.10.7.1.1,RMON2-MIB::ringStationControlDroppedFrames,Counter32,read-only,,deprecated,,The total number of frames that were received by the probe and therefore not accounted for in the *StatsDropEvents, but that the probe chose not to count for this entry for whatever reason. Most often, this event occurs when the probe is out of some resources and decides to shed load from this collection. This count does not include packets that were not counted because they had MAC-layer errors. Note that, unlike the dropEvents counter, this number is the exact number of frames dropped.
.1.3.6.1.2.1.16.10.7.1.2,RMON2-MIB::ringStationControlCreateTime,TimeTicks,read-only,,deprecated,,The value of sysUpTime when this control entry was last activated. This can be used by the management station to ensure that the table has not been deleted and recreated between polls.
.1.3.6.1.2.1.16.10.8,RMON2-MIB::sourceRoutingStats2Table,,not-accessible,,deprecated,,Contains the RMON-2 augmentations to RMON-1. This table has been deprecated, as it has not had enough independent implementations to demonstrate interoperability to meet the requirements of a Draft Standard.
.1.3.6.1.2.1.16.10.8.1,RMON2-MIB::sourceRoutingStats2Entry,,not-accessible,,deprecated,,Contains the RMON-2 augmentations to RMON-1.
.1.3.6.1.2.1.16.10.8.1.1,RMON2-MIB::sourceRoutingStatsDroppedFrames,Counter32,read-only,,deprecated,,The total number of frames that were received by the probe and therefore not accounted for in the *StatsDropEvents, but that the probe chose not to count for this entry for whatever reason. Most often, this event occurs when the probe is out of some resources and decides to shed load from this collection. This count does not include packets that were not counted because they had MAC-layer errors. Note that, unlike the dropEvents counter, this number is the exact number of frames dropped.
.1.3.6.1.2.1.16.10.8.1.2,RMON2-MIB::sourceRoutingStatsCreateTime,TimeTicks,read-only,,deprecated,,The value of sysUpTime when this control entry was last activated. This can be used by the management station to ensure that the table has not been deleted and recreated between polls.
.1.3.6.1.2.1.16.11,RMON2-MIB::protocolDir,,,,,,
.1.3.6.1.2.1.16.11.1,RMON2-MIB::protocolDirLastChange,TimeTicks,read-only,,current,,The value of sysUpTime at the time the protocol directory was last modified, either through insertions or deletions, or through modifications of the protocolDirAddressMapConfig, protocolDirHostConfig, or protocolDirMatrixConfig.
.1.3.6.1.2.1.16.11.2,RMON2-MIB::protocolDirTable,,not-accessible,,current,,This table lists the protocols that this agent has the capability to decode and count. There is one entry in this table for each such protocol. These protocols represent different network-layer, transport-layer, and higher-layer protocols. The agent should boot up with this table preconfigured with those protocols that it knows about and wishes to monitor. Implementations are strongly encouraged to support protocols higher than the network layer (at least for the protocol distribution group), even for implementations that don't support the application-layer groups.
.1.3.6.1.2.1.16.11.2.1,RMON2-MIB::protocolDirEntry,,not-accessible,protocolDirID:protocolDirParameters,current,,A conceptual row in the protocolDirTable. An example of the indexing of this entry is protocolDirLocalIndex.8.0.0.0.1.0.0.8.0.2.0.0, which is the encoding of a length of 8, followed by 8 subids encoding the protocolDirID of 1.2048, followed by a length of 2 and the 2 subids encoding zero-valued parameters. Note that some combinations of index values may result in an index that exceeds 128 sub-identifiers in length, which exceeds the maximum for the SNMP protocol. Implementations should take care to avoid such combinations.
.1.3.6.1.2.1.16.11.2.1.1,RMON2-MIB::protocolDirID,OCTET,not-accessible,,current,,A unique identifier for a particular protocol. Standard identifiers will be defined in such a manner that they can often be used as specifications for new protocols - i.e., a tree-structured assignment mechanism that matches the protocol encapsulation 'tree' and that has algorithmic assignment mechanisms for certain subtrees. See RFC 2074 for more details. Despite the algorithmic mechanism, the probe will only place entries in here for those protocols it chooses to collect. In other words, it need not populate this table with all possible ethernet protocol types, nor need it create them on the fly when it sees them. Whether it does these things is a matter of product definition (cost/benefit, usability) and is up to the designer of the product. If an entry is written to this table with a protocolDirID that the agent doesn't understand, either directly or algorithmically, the SET request will be rejected with an inconsistentName or badValue (for SNMPv1) error.
.1.3.6.1.2.1.16.11.2.1.2,RMON2-MIB::protocolDirParameters,OCTET,not-accessible,,current,,A set of parameters for the associated protocolDirID. See the associated RMON2 Protocol Identifiers document for a description of the possible parameters. There will be one octet in this string for each sub-identifier in the protocolDirID, and the parameters will appear here in the same order as the associated sub-identifiers appear in the protocolDirID. Every node in the protocolDirID tree has a different, optional set of parameters defined (that is, the definition of parameters for a node is optional). The proper parameter value for each node is included in this string. Note that the inclusion of a parameter value in this string for each node is not optional. What is optional is that a node may have no parameters defined, in which case the parameter field for that node will be zero.
.1.3.6.1.2.1.16.11.2.1.3,RMON2-MIB::protocolDirLocalIndex,Integer32,read-only,,current,,The locally arbitrary but unique identifier associated with this protocolDir entry. The value for each supported protocol must remain constant at least from one re-initialization of the entity's network management system to the next re-initialization, except that if a protocol is deleted and re-created, it must be re-created with a new value that has not been used since the last re-initialization. The specific value is meaningful only within a given SNMP entity. A protocolDirLocalIndex must not be re-used until the next agent restart in the event that the protocol directory entry is deleted.
.1.3.6.1.2.1.16.11.2.1.4,RMON2-MIB::protocolDirDescr,OCTET,read-create,,current,,A textual description of the protocol encapsulation. A probe may choose to describe only a subset of the entire encapsulation (e.g., only the highest layer). This object is intended for human consumption only. This object may not be modified if the associated protocolDirStatus object is equal to active(1).
.1.3.6.1.2.1.16.11.2.1.5,RMON2-MIB::protocolDirType,BITS,read-only,,current,extensible(0):addressRecognitionCapable(1),This object describes 2 attributes of this protocol directory entry. The presence or absence of the 'extensible' bit describes whether this protocol directory entry can be extended by the user by creating protocol directory entries that are children of this protocol. An example of an entry that will often allow extensibility is 'ip.udp'. The probe may automatically populate some children of this node, such as 'ip.udp.snmp' and 'ip.udp.dns'. A probe administrator or user may also populate additional children via remote SNMP requests that create entries in this table. When a child node is added for a protocol for which the probe has no built-in support extending a parent node (for which the probe does have built-in support), that child node is not extendable. This is termed 'limited extensibility'. When a child node is added through this extensibility mechanism, the values of protocolDirLocalIndex and protocolDirType shall be assigned by the agent. The other objects in the entry will be assigned by the manager who is creating the new entry. This object also describes whether this agent can recognize addresses for this protocol, should it be a network-level protocol. That is, while a probe may be able to recognize packets of a particular network-layer protocol and count them, it takes additional logic to be able to recognize the addresses in this protocol and to populate network-layer or application-layer tables with the addresses in this protocol. If this bit is set, the agent will recognize network-layer addresses for this protocol and populate the network- and application-layer host and matrix tables with these protocols. Note that when an entry is created, the agent will supply values for the bits that match the capabilities of the agent with respect to this protocol. Note that since row creations usually exercise the limited extensibility feature, these bits will usually be set to zero.
.1.3.6.1.2.1.16.11.2.1.6,RMON2-MIB::protocolDirAddressMapConfig,INTEGER,read-create,,current,notSupported(1):supportedOff(2):supportedOn(3),This object describes and configures the probe's support for address mapping for this protocol. When the probe creates entries in this table for all protocols that it understands, it will set the entry to notSupported(1) if it doesn't have the capability to perform address mapping for the protocol or if this protocol is not a network-layer protocol. When an entry is created in this table by a management operation as part of the limited extensibility feature, the probe must set this value to notSupported(1), because limited extensibility of the protocolDirTable does not extend to interpreting addresses of the extended protocols. If the value of this object is notSupported(1), the probe will not perform address mapping for this protocol and shall not allow this object to be changed to any other value. If the value of this object is supportedOn(3), the probe supports address mapping for this protocol and is configured to perform address mapping for this protocol for all addressMappingControlEntries and all interfaces. If the value of this object is supportedOff(2), the probe supports address mapping for this protocol but is configured to not perform address mapping for this protocol for any addressMappingControlEntries and all interfaces. Whenever this value changes from supportedOn(3) to supportedOff(2), the probe shall delete all related entries in the addressMappingTable.
.1.3.6.1.2.1.16.11.2.1.7,RMON2-MIB::protocolDirHostConfig,INTEGER,read-create,,current,notSupported(1):supportedOff(2):supportedOn(3),This object describes and configures the probe's support for the network-layer and application-layer host tables for this protocol. When the probe creates entries in this table for all protocols that it understands, it will set the entry to notSupported(1) if it doesn't have the capability to track the nlHostTable for this protocol or if the alHostTable is implemented but doesn't have the capability to track this protocol. Note that if the alHostTable is implemented, the probe may only support a protocol if it is supported in both the nlHostTable and the alHostTable. If the associated protocolDirType object has the addressRecognitionCapable bit set, then this is a network- layer protocol for which the probe recognizes addresses, and thus the probe will populate the nlHostTable and alHostTable with addresses it discovers for this protocol. If the value of this object is notSupported(1), the probe will not track the nlHostTable or alHostTable for this protocol and shall not allow this object to be changed to any other value. If the value of this object is supportedOn(3), the probe supports tracking of the nlHostTable and alHostTable for this protocol and is configured to track both tables for this protocol for all control entries and all interfaces. If the value of this object is supportedOff(2), the probe supports tracking of the nlHostTable and alHostTable for this protocol but is configured to not track these tables for any control entries or interfaces. Whenever this value changes from supportedOn(3) to supportedOff(2), the probe shall delete all related entries in the nlHostTable and alHostTable. Note that since each alHostEntry references 2 protocol directory entries, one for the network address and one for the type of the highest protocol recognized, an entry will only be created in that table if this value is supportedOn(3) for both protocols.
.1.3.6.1.2.1.16.11.2.1.8,RMON2-MIB::protocolDirMatrixConfig,INTEGER,read-create,,current,notSupported(1):supportedOff(2):supportedOn(3),This object describes and configures the probe's support for the network-layer and application-layer matrix tables for this protocol. When the probe creates entries in this table for all protocols that it understands, it will set the entry to notSupported(1) if it doesn't have the capability to track the nlMatrixTables for this protocol or if the alMatrixTables are implemented but don't have the capability to track this protocol. Note that if the alMatrix tables are implemented, the probe may only support a protocol if it is supported in both of the nlMatrixTables and both of the alMatrixTables. If the associated protocolDirType object has the addressRecognitionCapable bit set, then this is a network- layer protocol for which the probe recognizes addresses, and thus the probe will populate both of the nlMatrixTables and both of the alMatrixTables with addresses it discovers for this protocol. If the value of this object is notSupported(1), the probe will not track either of the nlMatrixTables or the alMatrixTables for this protocol and shall not allow this object to be changed to any other value. If the value of this object is supportedOn(3), the probe supports tracking of both of the nlMatrixTables and (if implemented) both of the alMatrixTables for this protocol and is configured to track these tables for this protocol for all control entries and all interfaces. If the value of this object is supportedOff(2), the probe supports tracking of both of the nlMatrixTables and (if implemented) both of the alMatrixTables for this protocol but is configured to not track these tables for this protocol for any control entries or interfaces. Whenever this value changes from supportedOn(3) to supportedOff(2), the probe shall delete all related entries in the nlMatrixTables and the alMatrixTables. Note that since each alMatrixEntry references 2 protocol directory entries, one for the network address and one for the type of the highest protocol recognized, an entry will only be created in that table if this value is supportedOn(3) for both protocols.
.1.3.6.1.2.1.16.11.2.1.9,RMON2-MIB::protocolDirOwner,OCTET,read-create,,current,,The entity that configured this entry and is therefore using the resources assigned to it.
.1.3.6.1.2.1.16.11.2.1.10,RMON2-MIB::protocolDirStatus,INTEGER,read-create,,current,active(1):notInService(2):notReady(3):createAndGo(4):createAndWait(5):destroy(6),The status of this protocol directory entry. An entry may not exist in the active state unless all objects in the entry have an appropriate value. If this object is not equal to active(1), all associated entries in the nlHostTable, nlMatrixSDTable, nlMatrixDSTable, alHostTable, alMatrixSDTable, and alMatrixDSTable shall be deleted.
.1.3.6.1.2.1.16.12,RMON2-MIB::protocolDist,,,,,,
.1.3.6.1.2.1.16.12.1,RMON2-MIB::protocolDistControlTable,,not-accessible,,current,,Controls the setup of protocol type distribution statistics tables. Implementations are encouraged to add an entry per monitored interface upon initialization so that a default collection of protocol statistics is available. Rationale: This table controls collection of very basic statistics for any or all of the protocols detected on a given interface. An NMS can use this table to quickly determine bandwidth allocation utilized by different protocols. A media-specific statistics collection could also be configured (e.g., etherStats, trPStats) to easily obtain total frame, octet, and droppedEvents for the same interface.
.1.3.6.1.2.1.16.12.1.1,RMON2-MIB::protocolDistControlEntry,,not-accessible,protocolDistControlIndex,current,,A conceptual row in the protocolDistControlTable. An example of the indexing of this entry is protocolDistControlDroppedFrames.7
.1.3.6.1.2.1.16.12.1.1.1,RMON2-MIB::protocolDistControlIndex,Integer32,not-accessible,,current,,A unique index for this protocolDistControlEntry.
.1.3.6.1.2.1.16.12.1.1.2,RMON2-MIB::protocolDistControlDataSource,OBJECT,read-create,,current,,The source of data for the this protocol distribution. The statistics in this group reflect all packets on the local network segment attached to the identified interface. This object may not be modified if the associated protocolDistControlStatus object is equal to active(1).
.1.3.6.1.2.1.16.12.1.1.3,RMON2-MIB::protocolDistControlDroppedFrames,Counter32,read-only,,current,,The total number of frames that were received by the probe and therefore not accounted for in the *StatsDropEvents, but that the probe chose not to count for this entry for whatever reason. Most often, this event occurs when the probe is out of some resources and decides to shed load from this collection. This count does not include packets that were not counted because they had MAC-layer errors. Note that, unlike the dropEvents counter, this number is the exact number of frames dropped.
.1.3.6.1.2.1.16.12.1.1.4,RMON2-MIB::protocolDistControlCreateTime,TimeTicks,read-only,,current,,The value of sysUpTime when this control entry was last activated. This can be used by the management station to ensure that the table has not been deleted and recreated between polls.
.1.3.6.1.2.1.16.12.1.1.5,RMON2-MIB::protocolDistControlOwner,OCTET,read-create,,current,,The entity that configured this entry and is therefore using the resources assigned to it.
.1.3.6.1.2.1.16.12.1.1.6,RMON2-MIB::protocolDistControlStatus,INTEGER,read-create,,current,active(1):notInService(2):notReady(3):createAndGo(4):createAndWait(5):destroy(6),The status of this row. An entry may not exist in the active state unless all objects in the entry have an appropriate value. If this object is not equal to active(1), all associated entries in the protocolDistStatsTable shall be deleted.
.1.3.6.1.2.1.16.12.2,RMON2-MIB::protocolDistStatsTable,,not-accessible,,current,,An entry is made in this table for every protocol in the protocolDirTable that has been seen in at least one packet. Counters are updated in this table for every protocol type that is encountered when parsing a packet, but no counters are updated for packets with MAC-layer errors. Note that if a protocolDirEntry is deleted, all associated entries in this table are removed.
.1.3.6.1.2.1.16.12.2.1,RMON2-MIB::protocolDistStatsEntry,,not-accessible,protocolDistControlIndex:protocolDirLocalIndex,current,,A conceptual row in the protocolDistStatsTable. The index is composed of the protocolDistControlIndex of the associated protocolDistControlEntry, followed by the protocolDirLocalIndex of the associated protocol that this entry represents. In other words, the index identifies the protocol distribution an entry is a part of and the particular protocol that it represents. An example of the indexing of this entry is protocolDistStatsPkts.1.18
.1.3.6.1.2.1.16.12.2.1.1,RMON2-MIB::protocolDistStatsPkts,Gauge32,read-only,,current,,The number of packets of this protocol type received without errors. Note that this is the number of link-layer packets, so if a single network-layer packet is fragmented into several link-layer frames, this counter is incremented several times.
.1.3.6.1.2.1.16.12.2.1.2,RMON2-MIB::protocolDistStatsOctets,Gauge32,read-only,,current,,The number of octets in packets of this protocol type received since it was added to the protocolDistStatsTable (excluding framing bits, but including FCS octets), except for those octets in packets that contained errors. Note that this doesn't count just those octets in the particular protocol frames but includes the entire packet that contained the protocol.
.1.3.6.1.2.1.16.13,RMON2-MIB::addressMap,,,,,,
.1.3.6.1.2.1.16.13.1,RMON2-MIB::addressMapInserts,Counter32,read-only,,current,,The number of times an address mapping entry has been inserted into the addressMapTable. If an entry is inserted, then deleted, and then inserted, this counter will be incremented by 2. Note that the table size can be determined by subtracting addressMapDeletes from addressMapInserts.
.1.3.6.1.2.1.16.13.2,RMON2-MIB::addressMapDeletes,Counter32,read-only,,current,,The number of times an address mapping entry has been deleted from the addressMapTable (for any reason). If an entry is deleted, then inserted, and then deleted, this counter will be incremented by 2. Note that the table size can be determined by subtracting addressMapDeletes from addressMapInserts.
.1.3.6.1.2.1.16.13.3,RMON2-MIB::addressMapMaxDesiredEntries,Integer32,read-write,,current,,The maximum number of entries that are desired in the addressMapTable. The probe will not create more than this number of entries in the table but may choose to create fewer entries in this table for any reason, including the lack of resources. If this object is set to a value less than the current number of entries, enough entries are chosen in an implementation-dependent manner and deleted so that the number of entries in the table equals the value of this object. If this value is set to -1, the probe may create any number of entries in this table. This object may be used to control how resources are allocated on the probe for the various RMON functions.
.1.3.6.1.2.1.16.13.4,RMON2-MIB::addressMapControlTable,,not-accessible,,current,,A table to control the collection of mappings from network layer address to physical address to interface. Note that this is not like the typical RMON controlTable and dataTable in which each entry creates its own data table. Each entry in this table enables the discovery of addresses on a new interface and the placement of address mappings into the central addressMapTable. Implementations are encouraged to add an entry per monitored interface upon initialization so that a default collection of address mappings is available.
.1.3.6.1.2.1.16.13.4.1,RMON2-MIB::addressMapControlEntry,,not-accessible,addressMapControlIndex,current,,A conceptual row in the addressMapControlTable. An example of the indexing of this entry is addressMapControlDroppedFrames.1
.1.3.6.1.2.1.16.13.4.1.1,RMON2-MIB::addressMapControlIndex,Integer32,not-accessible,,current,,A unique index for this entry in the addressMapControlTable.
.1.3.6.1.2.1.16.13.4.1.2,RMON2-MIB::addressMapControlDataSource,OBJECT,read-create,,current,,The source of data for this addressMapControlEntry.
.1.3.6.1.2.1.16.13.4.1.3,RMON2-MIB::addressMapControlDroppedFrames,Counter32,read-only,,current,,The total number of frames that were received by the probe and therefore not accounted for in the *StatsDropEvents, but that the probe chose not to count for this entry for whatever reason. Most often, this event occurs when the probe is out of some resources and decides to shed load from this collection. This count does not include packets that were not counted because they had MAC-layer errors. Note that, unlike the dropEvents counter, this number is the exact number of frames dropped.
.1.3.6.1.2.1.16.13.4.1.4,RMON2-MIB::addressMapControlOwner,OCTET,read-create,,current,,The entity that configured this entry and is therefore using the resources assigned to it.
.1.3.6.1.2.1.16.13.4.1.5,RMON2-MIB::addressMapControlStatus,INTEGER,read-create,,current,active(1):notInService(2):notReady(3):createAndGo(4):createAndWait(5):destroy(6),The status of this addressMap control entry. An entry may not exist in the active state unless all objects in the entry have an appropriate value. If this object is not equal to active(1), all associated entries in the addressMapTable shall be deleted.
.1.3.6.1.2.1.16.13.5,RMON2-MIB::addressMapTable,,not-accessible,,current,,A table of mappings from network layer address to physical address to interface. The probe will add entries to this table based on the source MAC and network addresses seen in packets without MAC-level errors. The probe will populate this table for all protocols in the protocol directory table whose value of protocolDirAddressMapConfig is equal to supportedOn(3), and will delete any entries whose protocolDirEntry is deleted or has a protocolDirAddressMapConfig value of supportedOff(2).
.1.3.6.1.2.1.16.13.5.1,RMON2-MIB::addressMapEntry,,not-accessible,addressMapTimeMark:protocolDirLocalIndex:addressMapNetworkAddress:addressMapSource,current,,A conceptual row in the addressMapTable. The protocolDirLocalIndex in the index identifies the network layer protocol of the addressMapNetworkAddress. An example of the indexing of this entry is addressMapSource.783495.18.4.128.2.6.6.11.1.3.6.1.2.1.2.2.1.1.1. Note that some combinations of index values may result in an index that exceeds 128 sub-identifiers in length, which exceeds the maximum for the SNMP protocol. Implementations should take care to avoid such combinations.
.1.3.6.1.2.1.16.13.5.1.1,RMON2-MIB::addressMapTimeMark,TimeTicks,not-accessible,,current,,A TimeFilter for this entry. See the TimeFilter textual convention to see how this works.
.1.3.6.1.2.1.16.13.5.1.2,RMON2-MIB::addressMapNetworkAddress,OCTET,not-accessible,,current,,The network address for this relation. This is represented as an octet string with specific semantics and length as identified by the protocolDirLocalIndex component of the index. For example, if the protocolDirLocalIndex indicates an encapsulation of ip, this object is encoded as a length octet of 4, followed by the 4 octets of the IP address, in network byte order.
.1.3.6.1.2.1.16.13.5.1.3,RMON2-MIB::addressMapSource,OBJECT,not-accessible,,current,,The interface or port on which the associated network address was most recently seen. If this address mapping was discovered on an interface, this object shall identify the instance of the ifIndex object, defined in [RFC2863], for the desired interface. For example, if an entry were to receive data from interface #1, this object would be set to ifIndex.1. If this address mapping was discovered on a port, this object shall identify the instance of the rptrGroupPortIndex object, defined in [RFC2108], for the desired port. For example, if an entry were to receive data from group #1, port #1, this object would be set to rptrGroupPortIndex.1.1. Note that while the dataSource associated with this entry may only point to index objects, this object may at times point to repeater port objects. This situation occurs when the dataSource points to an interface that is a locally attached repeater and the agent has additional information about the source port of traffic seen on that repeater.
.1.3.6.1.2.1.16.13.5.1.4,RMON2-MIB::addressMapPhysicalAddress,OCTET,read-only,,current,,The last source physical address on which the associated network address was seen. If the protocol of the associated network address was encapsulated inside of a network-level or higher protocol, this will be the address of the next-lower protocol with the addressRecognitionCapable bit enabled and will be formatted as specified for that protocol.
.1.3.6.1.2.1.16.13.5.1.5,RMON2-MIB::addressMapLastChange,TimeTicks,read-only,,current,,The value of sysUpTime at the time this entry was last created or the values of the physical address changed. This can be used to help detect duplicate address problems, in which case this object will be updated frequently.
.1.3.6.1.2.1.16.14,RMON2-MIB::nlHost,,,,,,
.1.3.6.1.2.1.16.14.1,RMON2-MIB::hlHostControlTable,,not-accessible,,current,,A list of higher-layer (i.e., non-MAC) host table control entries. These entries will enable the collection of the network- and application-level host tables indexed by network addresses. Both the network- and application-level host tables are controlled by this table so that they will both be created and deleted at the same time, further increasing the ease with which they can be implemented as a single datastore. (Note that if an implementation stores application-layer host records in memory, it can derive network-layer host records from them.) Entries in the nlHostTable will be created on behalf of each entry in this table. Additionally, if this probe implements the alHostTable, entries in the alHostTable will be created on behalf of each entry in this table. Implementations are encouraged to add an entry per monitored interface upon initialization so that a default collection of host statistics is available.
.1.3.6.1.2.1.16.14.1.1,RMON2-MIB::hlHostControlEntry,,not-accessible,hlHostControlIndex,current,,A conceptual row in the hlHostControlTable. An example of the indexing of this entry is hlHostControlNlDroppedFrames.1
.1.3.6.1.2.1.16.14.1.1.1,RMON2-MIB::hlHostControlIndex,Integer32,not-accessible,,current,,An index that uniquely identifies an entry in the hlHostControlTable. Each such entry defines a function that discovers hosts on a particular interface and places statistics about them in the nlHostTable, and optionally in the alHostTable, on behalf of this hlHostControlEntry.
.1.3.6.1.2.1.16.14.1.1.2,RMON2-MIB::hlHostControlDataSource,OBJECT,read-create,,current,,The source of data for the associated host tables. The statistics in this group reflect all packets on the local network segment attached to the identified interface. This object may not be modified if the associated hlHostControlStatus object is equal to active(1).
.1.3.6.1.2.1.16.14.1.1.3,RMON2-MIB::hlHostControlNlDroppedFrames,Counter32,read-only,,current,,The total number of frames that were received by the probe and therefore not accounted for in the *StatsDropEvents, but that the probe chose not to count for the associated nlHost entries for whatever reason. Most often, this event occurs when the probe is out of some resources and decides to shed load from this collection. This count does not include packets that were not counted because they had MAC-layer errors. Note that if the nlHostTable is inactive because no protocols are enabled in the protocol directory, this value should be 0. Note that, unlike the dropEvents counter, this number is the exact number of frames dropped.
.1.3.6.1.2.1.16.14.1.1.4,RMON2-MIB::hlHostControlNlInserts,Counter32,read-only,,current,,The number of times an nlHost entry has been inserted into the nlHost table. If an entry is inserted, then deleted, and then inserted, this counter will be incremented by 2. To allow for efficient implementation strategies, agents may delay updating this object for short periods of time. For example, an implementation strategy may allow internal data structures to differ from those visible via SNMP for short periods of time. This counter may reflect the internal data structures for those short periods of time. Note that the table size can be determined by subtracting hlHostControlNlDeletes from hlHostControlNlInserts.
.1.3.6.1.2.1.16.14.1.1.5,RMON2-MIB::hlHostControlNlDeletes,Counter32,read-only,,current,,The number of times an nlHost entry has been deleted from the nlHost table (for any reason). If an entry is deleted, then inserted, and then deleted, this counter will be incremented by 2. To allow for efficient implementation strategies, agents may delay updating this object for short periods of time. For example, an implementation strategy may allow internal data structures to differ from those visible via SNMP for short periods of time. This counter may reflect the internal data structures for those short periods of time. Note that the table size can be determined by subtracting hlHostControlNlDeletes from hlHostControlNlInserts.
.1.3.6.1.2.1.16.14.1.1.6,RMON2-MIB::hlHostControlNlMaxDesiredEntries,Integer32,read-create,,current,,The maximum number of entries that are desired in the nlHostTable on behalf of this control entry. The probe will not create more than this number of associated entries in the table but may choose to create fewer entries in this table for any reason, including the lack of resources. If this object is set to a value less than the current number of entries, enough entries are chosen in an implementation-dependent manner and deleted so that the number of entries in the table equals the value of this object. If this value is set to -1, the probe may create any number of entries in this table. If the associated hlHostControlStatus object is equal to 'active', this object may not be modified. This object may be used to control how resources are allocated on the probe for the various RMON functions.
.1.3.6.1.2.1.16.14.1.1.7,RMON2-MIB::hlHostControlAlDroppedFrames,Counter32,read-only,,current,,The total number of frames that were received by the probe and therefore not accounted for in the *StatsDropEvents, but that the probe chose not to count for the associated alHost entries for whatever reason. Most often, this event occurs when the probe is out of some resources and decides to shed load from this collection. This count does not include packets that were not counted because they had MAC-layer errors. Note that if the alHostTable is not implemented or is inactive because no protocols are enabled in the protocol directory, this value should be 0. Note that, unlike the dropEvents counter, this number is the exact number of frames dropped.
.1.3.6.1.2.1.16.14.1.1.8,RMON2-MIB::hlHostControlAlInserts,Counter32,read-only,,current,,The number of times an alHost entry has been inserted into the alHost table. If an entry is inserted, then deleted, and then inserted, this counter will be incremented by 2. To allow for efficient implementation strategies, agents may delay updating this object for short periods of time. For example, an implementation strategy may allow internal data structures to differ from those visible via SNMP for short periods of time. This counter may reflect the internal data structures for those short periods of time. Note that the table size can be determined by subtracting hlHostControlAlDeletes from hlHostControlAlInserts.
.1.3.6.1.2.1.16.14.1.1.9,RMON2-MIB::hlHostControlAlDeletes,Counter32,read-only,,current,,The number of times an alHost entry has been deleted from the alHost table (for any reason). If an entry is deleted, then inserted, and then deleted, this counter will be incremented by 2. To allow for efficient implementation strategies, agents may delay updating this object for short periods of time. For example, an implementation strategy may allow internal data structures to differ from those visible via SNMP for short periods of time. This counter may reflect the internal data structures for those short periods of time. Note that the table size can be determined by subtracting hlHostControlAlDeletes from hlHostControlAlInserts.
.1.3.6.1.2.1.16.14.1.1.10,RMON2-MIB::hlHostControlAlMaxDesiredEntries,Integer32,read-create,,current,,The maximum number of entries that are desired in the alHost table on behalf of this control entry. The probe will not create more than this number of associated entries in the table but may choose to create fewer entries in this table for any reason, including the lack of resources. If this object is set to a value less than the current number of entries, enough entries are chosen in an implementation-dependent manner and deleted so that the number of entries in the table equals the value of this object. If this value is set to -1, the probe may create any number of entries in this table. If the associated hlHostControlStatus object is equal to 'active', this object may not be modified. This object may be used to control how resources are allocated on the probe for the various RMON functions.
.1.3.6.1.2.1.16.14.1.1.11,RMON2-MIB::hlHostControlOwner,OCTET,read-create,,current,,The entity that configured this entry and is therefore using the resources assigned to it.
.1.3.6.1.2.1.16.14.1.1.12,RMON2-MIB::hlHostControlStatus,INTEGER,read-create,,current,active(1):notInService(2):notReady(3):createAndGo(4):createAndWait(5):destroy(6),The status of this hlHostControlEntry. An entry may not exist in the active state unless all objects in the entry have an appropriate value. If this object is not equal to active(1), all associated entries in the nlHostTable and alHostTable shall be deleted.
.1.3.6.1.2.1.16.14.2,RMON2-MIB::nlHostTable,,not-accessible,,current,,A collection of statistics for a particular network layer address that has been discovered on an interface of this device. The probe will populate this table for all network layer protocols in the protocol directory table whose value of protocolDirHostConfig is equal to supportedOn(3), and will delete any entries whose protocolDirEntry is deleted or has a protocolDirHostConfig value of supportedOff(2). The probe will add to this table all addresses seen as the source or destination address in all packets with no MAC errors, and will increment octet and packet counts in the table for all packets with no MAC errors.
.1.3.6.1.2.1.16.14.2.1,RMON2-MIB::nlHostEntry,,not-accessible,hlHostControlIndex:nlHostTimeMark:protocolDirLocalIndex:nlHostAddress,current,,A conceptual row in the nlHostTable. The hlHostControlIndex value in the index identifies the hlHostControlEntry on whose behalf this entry was created. The protocolDirLocalIndex value in the index identifies the network layer protocol of the nlHostAddress. An example of the indexing of this entry is nlHostOutPkts.1.783495.18.4.128.2.6.6. Note that some combinations of index values may result in an index that exceeds 128 sub-identifiers in length, which exceeds the maximum for the SNMP protocol. Implementations should take care to avoid such combinations.
.1.3.6.1.2.1.16.14.2.1.1,RMON2-MIB::nlHostTimeMark,TimeTicks,not-accessible,,current,,A TimeFilter for this entry. See the TimeFilter textual convention to see how this works.
.1.3.6.1.2.1.16.14.2.1.2,RMON2-MIB::nlHostAddress,OCTET,not-accessible,,current,,The network address for this nlHostEntry. This is represented as an octet string with specific semantics and length as identified by the protocolDirLocalIndex component of the index. For example, if the protocolDirLocalIndex indicates an encapsulation of IP, this object is encoded as a length octet of 4, followed by the 4 octets of the IP address, in network byte order.
.1.3.6.1.2.1.16.14.2.1.3,RMON2-MIB::nlHostInPkts,Gauge32,read-only,,current,,The number of packets without errors transmitted to this address since it was added to the nlHostTable. Note that this is the number of link-layer packets, so if a single network-layer packet is fragmented into several link-layer frames, this counter is incremented several times.
.1.3.6.1.2.1.16.14.2.1.4,RMON2-MIB::nlHostOutPkts,Gauge32,read-only,,current,,The number of packets without errors transmitted by this address since it was added to the nlHostTable. Note that this is the number of link-layer packets, so if a single network-layer packet is fragmented into several link-layer frames, this counter is incremented several times.
.1.3.6.1.2.1.16.14.2.1.5,RMON2-MIB::nlHostInOctets,Gauge32,read-only,,current,,The number of octets transmitted to this address since it was added to the nlHostTable (excluding framing bits, but including FCS octets), excluding octets in packets that contained errors. Note that this doesn't count just those octets in the particular protocol frames but includes the entire packet that contained the protocol.
.1.3.6.1.2.1.16.14.2.1.6,RMON2-MIB::nlHostOutOctets,Gauge32,read-only,,current,,The number of octets transmitted by this address since it was added to the nlHostTable (excluding framing bits, but including FCS octets), excluding octets in packets that contained errors. Note that this doesn't count just those octets in the particular protocol frames but includes the entire packet that contained the protocol.
.1.3.6.1.2.1.16.14.2.1.7,RMON2-MIB::nlHostOutMacNonUnicastPkts,Gauge32,read-only,,current,,The number of packets without errors transmitted by this address that were directed to any MAC broadcast addresses or to any MAC multicast addresses since this host was added to the nlHostTable. Note that this is the number of link-layer packets, so if a single network-layer packet is fragmented into several link-layer frames, this counter is incremented several times.
.1.3.6.1.2.1.16.14.2.1.8,RMON2-MIB::nlHostCreateTime,TimeTicks,read-only,,current,,The value of sysUpTime when this entry was last activated. This can be used by the management station to ensure that the entry has not been deleted and recreated between polls.
.1.3.6.1.2.1.16.15,RMON2-MIB::nlMatrix,,,,,,
.1.3.6.1.2.1.16.15.1,RMON2-MIB::hlMatrixControlTable,,not-accessible,,current,,A list of higher-layer (i.e., non-MAC) matrix control entries. These entries will enable the collection of the network- and application-level matrix tables containing conversation statistics indexed by pairs of network addresses. Both the network- and application-level matrix tables are controlled by this table so that they will both be created and deleted at the same time, further increasing the ease with which they can be implemented as a single datastore. (Note that if an implementation stores application-layer matrix records in memory, it can derive network-layer matrix records from them.) Entries in the nlMatrixSDTable and nlMatrixDSTable will be created on behalf of each entry in this table. Additionally, if this probe implements the alMatrix tables, entries in the alMatrix tables will be created on behalf of each entry in this table.
.1.3.6.1.2.1.16.15.1.1,RMON2-MIB::hlMatrixControlEntry,,not-accessible,hlMatrixControlIndex,current,,A conceptual row in the hlMatrixControlTable. An example of indexing of this entry is hlMatrixControlNlDroppedFrames.1
.1.3.6.1.2.1.16.15.1.1.1,RMON2-MIB::hlMatrixControlIndex,Integer32,not-accessible,,current,,An index that uniquely identifies an entry in the hlMatrixControlTable. Each such entry defines a function that discovers conversations on a particular interface and places statistics about them in the nlMatrixSDTable and the nlMatrixDSTable, and optionally the alMatrixSDTable and alMatrixDSTable, on behalf of this hlMatrixControlEntry.
.1.3.6.1.2.1.16.15.1.1.2,RMON2-MIB::hlMatrixControlDataSource,OBJECT,read-create,,current,,The source of the data for the associated matrix tables. The statistics in this group reflect all packets on the local network segment attached to the identified interface. This object may not be modified if the associated hlMatrixControlStatus object is equal to active(1).
.1.3.6.1.2.1.16.15.1.1.3,RMON2-MIB::hlMatrixControlNlDroppedFrames,Counter32,read-only,,current,,The total number of frames that were received by the probe and therefore not accounted for in the *StatsDropEvents, but that the probe chose not to count for this entry for whatever reason. Most often, this event occurs when the probe is out of some resources and decides to shed load from this collection. This count does not include packets that were not counted because they had MAC-layer errors. Note that if the nlMatrixTables are inactive because no protocols are enabled in the protocol directory, this value should be 0. Note that, unlike the dropEvents counter, this number is the exact number of frames dropped.
.1.3.6.1.2.1.16.15.1.1.4,RMON2-MIB::hlMatrixControlNlInserts,Counter32,read-only,,current,,The number of times an nlMatrix entry has been inserted into the nlMatrix tables. If an entry is inserted, then deleted, and then inserted, this counter will be incremented by 2. The addition of a conversation into both the nlMatrixSDTable and nlMatrixDSTable shall be counted as two insertions (even though every addition into one table must be accompanied by an insertion into the other). To allow for efficient implementation strategies, agents may delay updating this object for short periods of time. For example, an implementation strategy may allow internal data structures to differ from those visible via SNMP for short periods of time. This counter may reflect the internal data structures for those short periods of time. Note that the sum of then nlMatrixSDTable and nlMatrixDSTable sizes can be determined by subtracting hlMatrixControlNlDeletes from hlMatrixControlNlInserts.
.1.3.6.1.2.1.16.15.1.1.5,RMON2-MIB::hlMatrixControlNlDeletes,Counter32,read-only,,current,,The number of times an nlMatrix entry has been deleted from the nlMatrix tables (for any reason). If an entry is deleted, then inserted, and then deleted, this counter will be incremented by 2. The deletion of a conversation from both the nlMatrixSDTable and nlMatrixDSTable shall be counted as two deletions (even though every deletion from one table must be accompanied by a deletion from the other). To allow for efficient implementation strategies, agents may delay updating this object for short periods of time. For example, an implementation strategy may allow internal data structures to differ from those visible via SNMP for short periods of time. This counter may reflect the internal data structures for those short periods of time. Note that the table size can be determined by subtracting hlMatrixControlNlDeletes from hlMatrixControlNlInserts.
.1.3.6.1.2.1.16.15.1.1.6,RMON2-MIB::hlMatrixControlNlMaxDesiredEntries,Integer32,read-create,,current,,The maximum number of entries that are desired in the nlMatrix tables on behalf of this control entry. The probe will not create more than this number of associated entries in the table but may choose to create fewer entries in this table for any reason, including the lack of resources. If this object is set to a value less than the current number of entries, enough entries are chosen in an implementation-dependent manner and deleted so that the number of entries in the table equals the value of this object. If this value is set to -1, the probe may create any number of entries in this table. If the associated hlMatrixControlStatus object is equal to 'active', this object may not be modified. This object may be used to control how resources are allocated on the probe for the various RMON functions.
.1.3.6.1.2.1.16.15.1.1.7,RMON2-MIB::hlMatrixControlAlDroppedFrames,Counter32,read-only,,current,,The total number of frames that were received by the probe and therefore not accounted for in the *StatsDropEvents, but that the probe chose not to count for this entry for whatever reason. Most often, this event occurs when the probe is out of some resources and decides to shed load from this collection. This count does not include packets that were not counted because they had MAC-layer errors. Note that if the alMatrixTables are not implemented or are inactive because no protocols are enabled in the protocol directory, this value should be 0. Note that, unlike the dropEvents counter, this number is the exact number of frames dropped.
.1.3.6.1.2.1.16.15.1.1.8,RMON2-MIB::hlMatrixControlAlInserts,Counter32,read-only,,current,,The number of times an alMatrix entry has been inserted into the alMatrix tables. If an entry is inserted, then deleted, and then inserted, this counter will be incremented by 2. The addition of a conversation into both the alMatrixSDTable and alMatrixDSTable shall be counted as two insertions (even though every addition into one table must be accompanied by an insertion into the other). To allow for efficient implementation strategies, agents may delay updating this object for short periods of time. For example, an implementation strategy may allow internal data structures to differ from those visible via SNMP for short periods of time. This counter may reflect the internal data structures for those short periods of time. Note that the table size can be determined by subtracting hlMatrixControlAlDeletes from hlMatrixControlAlInserts.
.1.3.6.1.2.1.16.15.1.1.9,RMON2-MIB::hlMatrixControlAlDeletes,Counter32,read-only,,current,,The number of times an alMatrix entry has been deleted from the alMatrix tables. If an entry is deleted, then inserted, and then deleted, this counter will be incremented by 2. The deletion of a conversation from both the alMatrixSDTable and alMatrixDSTable shall be counted as two deletions (even though every deletion from one table must be accompanied by a deletion from the other). To allow for efficient implementation strategies, agents may delay updating this object for short periods of time. For example, an implementation strategy may allow internal data structures to differ from those visible via SNMP for short periods of time. This counter may reflect the internal data structures for those short periods of time. Note that the table size can be determined by subtracting hlMatrixControlAlDeletes from hlMatrixControlAlInserts.
.1.3.6.1.2.1.16.15.1.1.10,RMON2-MIB::hlMatrixControlAlMaxDesiredEntries,Integer32,read-create,,current,,The maximum number of entries that are desired in the alMatrix tables on behalf of this control entry. The probe will not create more than this number of associated entries in the table but may choose to create fewer entries in this table for any reason, including the lack of resources. If this object is set to a value less than the current number of entries, enough entries are chosen in an implementation-dependent manner and deleted so that the number of entries in the table equals the value of this object. If this value is set to -1, the probe may create any number of entries in this table. If the associated hlMatrixControlStatus object is equal to 'active', this object may not be modified. This object may be used to control how resources are allocated on the probe for the various RMON functions.
.1.3.6.1.2.1.16.15.1.1.11,RMON2-MIB::hlMatrixControlOwner,OCTET,read-create,,current,,The entity that configured this entry and is therefore using the resources assigned to it.
.1.3.6.1.2.1.16.15.1.1.12,RMON2-MIB::hlMatrixControlStatus,INTEGER,read-create,,current,active(1):notInService(2):notReady(3):createAndGo(4):createAndWait(5):destroy(6),The status of this hlMatrixControlEntry. An entry may not exist in the active state unless all objects in the entry have an appropriate value. If this object is not equal to active(1), all associated entries in the nlMatrixSDTable, nlMatrixDSTable, alMatrixSDTable, and alMatrixDSTable shall be deleted by the agent.
.1.3.6.1.2.1.16.15.2,RMON2-MIB::nlMatrixSDTable,,not-accessible,,current,,A list of traffic matrix entries that collect statistics for conversations between two network-level addresses. This table is indexed first by the source address and then by the destination address to make it convenient to collect all conversations from a particular address. The probe will populate this table for all network layer protocols in the protocol directory table whose value of protocolDirMatrixConfig is equal to supportedOn(3), and will delete any entries whose protocolDirEntry is deleted or has a protocolDirMatrixConfig value of supportedOff(2). The probe will add to this table all pairs of addresses seen in all packets with no MAC errors and will increment octet and packet counts in the table for all packets with no MAC errors. Further, this table will only contain entries that have a corresponding entry in the nlMatrixDSTable with the same source address and destination address.
.1.3.6.1.2.1.16.15.2.1,RMON2-MIB::nlMatrixSDEntry,,not-accessible,hlMatrixControlIndex:nlMatrixSDTimeMark:protocolDirLocalIndex:nlMatrixSDSourceAddress:nlMatrixSDDestAddress,current,,A conceptual row in the nlMatrixSDTable. The hlMatrixControlIndex value in the index identifies the hlMatrixControlEntry on whose behalf this entry was created. The protocolDirLocalIndex value in the index identifies the network-layer protocol of the nlMatrixSDSourceAddress and nlMatrixSDDestAddress. An example of the indexing of this table is nlMatrixSDPkts.1.783495.18.4.128.2.6.6.4.128.2.6.7. Note that some combinations of index values may result in an index that exceeds 128 sub-identifiers in length, which exceeds the maximum for the SNMP protocol. Implementations should take care to avoid such combinations.
.1.3.6.1.2.1.16.15.2.1.1,RMON2-MIB::nlMatrixSDTimeMark,TimeTicks,not-accessible,,current,,A TimeFilter for this entry. See the TimeFilter textual convention to see how this works.
.1.3.6.1.2.1.16.15.2.1.2,RMON2-MIB::nlMatrixSDSourceAddress,OCTET,not-accessible,,current,,The network source address for this nlMatrixSDEntry. This is represented as an octet string with specific semantics and length as identified by the protocolDirLocalIndex component of the index. For example, if the protocolDirLocalIndex indicates an encapsulation of IP, this object is encoded as a length octet of 4, followed by the 4 octets of the IP address, in network byte order.
.1.3.6.1.2.1.16.15.2.1.3,RMON2-MIB::nlMatrixSDDestAddress,OCTET,not-accessible,,current,,The network destination address for this nlMatrixSDEntry. This is represented as an octet string with specific semantics and length as identified by the protocolDirLocalIndex component of the index. For example, if the protocolDirLocalIndex indicates an encapsulation of IP, this object is encoded as a length octet of 4, followed by the 4 octets of the IP address, in network byte order.
.1.3.6.1.2.1.16.15.2.1.4,RMON2-MIB::nlMatrixSDPkts,Gauge32,read-only,,current,,The number of packets without errors transmitted from the source address to the destination address since this entry was added to the nlMatrixSDTable. Note that this is the number of link-layer packets, so if a single network-layer packet is fragmented into several link-layer frames, this counter is incremented several times.
.1.3.6.1.2.1.16.15.2.1.5,RMON2-MIB::nlMatrixSDOctets,Gauge32,read-only,,current,,The number of octets transmitted from the source address to the destination address since this entry was added to the nlMatrixSDTable (excluding framing bits, but including FCS octets), excluding octets in packets that contained errors. Note that this doesn't count just those octets in the particular protocol frames but includes the entire packet that contained the protocol.
.1.3.6.1.2.1.16.15.2.1.6,RMON2-MIB::nlMatrixSDCreateTime,TimeTicks,read-only,,current,,The value of sysUpTime when this entry was last activated. This can be used by the management station to ensure that the entry has not been deleted and recreated between polls.
.1.3.6.1.2.1.16.15.3,RMON2-MIB::nlMatrixDSTable,,not-accessible,,current,,A list of traffic matrix entries that collect statistics for conversations between two network-level addresses. This table is indexed first by the destination address and then by the source address to make it convenient to collect all conversations to a particular address. The probe will populate this table for all network layer protocols in the protocol directory table whose value of protocolDirMatrixConfig is equal to supportedOn(3), and will delete any entries whose protocolDirEntry is deleted or has a protocolDirMatrixConfig value of supportedOff(2). The probe will add to this table all pairs of addresses seen in all packets with no MAC errors and will increment octet and packet counts in the table for all packets with no MAC errors. Further, this table will only contain entries that have a corresponding entry in the nlMatrixSDTable with the same source address and destination address.
.1.3.6.1.2.1.16.15.3.1,RMON2-MIB::nlMatrixDSEntry,,not-accessible,hlMatrixControlIndex:nlMatrixDSTimeMark:protocolDirLocalIndex:nlMatrixDSDestAddress:nlMatrixDSSourceAddress,current,,A conceptual row in the nlMatrixDSTable. The hlMatrixControlIndex value in the index identifies the hlMatrixControlEntry on whose behalf this entry was created. The protocolDirLocalIndex value in the index identifies the network-layer protocol of the nlMatrixDSSourceAddress and nlMatrixDSDestAddress. An example of the indexing of this table is nlMatrixDSPkts.1.783495.18.4.128.2.6.7.4.128.2.6.6. Note that some combinations of index values may result in an index that exceeds 128 sub-identifiers in length, which exceeds the maximum for the SNMP protocol. Implementations should take care to avoid such combinations.
.1.3.6.1.2.1.16.15.3.1.1,RMON2-MIB::nlMatrixDSTimeMark,TimeTicks,not-accessible,,current,,A TimeFilter for this entry. See the TimeFilter textual convention to see how this works.
.1.3.6.1.2.1.16.15.3.1.2,RMON2-MIB::nlMatrixDSSourceAddress,OCTET,not-accessible,,current,,The network source address for this nlMatrixDSEntry. This is represented as an octet string with specific semantics and length as identified by the protocolDirLocalIndex component of the index. For example, if the protocolDirLocalIndex indicates an encapsulation of IP, this object is encoded as a length octet of 4, followed by the 4 octets of the IP address, in network byte order.
.1.3.6.1.2.1.16.15.3.1.3,RMON2-MIB::nlMatrixDSDestAddress,OCTET,not-accessible,,current,,The network destination address for this nlMatrixDSEntry. This is represented as an octet string with specific semantics and length as identified by the protocolDirLocalIndex component of the index. For example, if the protocolDirLocalIndex indicates an encapsulation of IP, this object is encoded as a length octet of 4, followed by the 4 octets of the IP address, in network byte order.
.1.3.6.1.2.1.16.15.3.1.4,RMON2-MIB::nlMatrixDSPkts,Gauge32,read-only,,current,,The number of packets without errors transmitted from the source address to the destination address since this entry was added to the nlMatrixDSTable. Note that this is the number of link-layer packets, so if a single network-layer packet is fragmented into several link-layer frames, this counter is incremented several times.
.1.3.6.1.2.1.16.15.3.1.5,RMON2-MIB::nlMatrixDSOctets,Gauge32,read-only,,current,,The number of octets transmitted from the source address to the destination address since this entry was added to the nlMatrixDSTable (excluding framing bits, but including FCS octets), excluding octets in packets that contained errors. Note that this doesn't count just those octets in the particular protocol frames but includes the entire packet that contained the protocol.
.1.3.6.1.2.1.16.15.3.1.6,RMON2-MIB::nlMatrixDSCreateTime,TimeTicks,read-only,,current,,The value of sysUpTime when this entry was last activated. This can be used by the management station to ensure that the entry has not been deleted and recreated between polls.
.1.3.6.1.2.1.16.15.4,RMON2-MIB::nlMatrixTopNControlTable,,not-accessible,,current,,A set of parameters that control the creation of a report of the top N matrix entries according to a selected metric.
.1.3.6.1.2.1.16.15.4.1,RMON2-MIB::nlMatrixTopNControlEntry,,not-accessible,nlMatrixTopNControlIndex,current,,A conceptual row in the nlMatrixTopNControlTable. An example of the indexing of this table is nlMatrixTopNControlDuration.3
.1.3.6.1.2.1.16.15.4.1.1,RMON2-MIB::nlMatrixTopNControlIndex,Integer32,not-accessible,,current,,An index that uniquely identifies an entry in the nlMatrixTopNControlTable. Each such entry defines one topN report prepared for one interface.
.1.3.6.1.2.1.16.15.4.1.2,RMON2-MIB::nlMatrixTopNControlMatrixIndex,Integer32,read-create,,current,,The nlMatrix[SD/DS] table for which a topN report will be prepared on behalf of this entry. The nlMatrix[SD/DS] table is identified by the value of the hlMatrixControlIndex for that table - that value is used here to identify the particular table. This object may not be modified if the associated nlMatrixTopNControlStatus object is equal to active(1).
.1.3.6.1.2.1.16.15.4.1.3,RMON2-MIB::nlMatrixTopNControlRateBase,INTEGER,read-create,,current,nlMatrixTopNPkts(1):nlMatrixTopNOctets(2):nlMatrixTopNHighCapacityPkts(3):nlMatrixTopNHighCapacityOctets(4),The variable for each nlMatrix[SD/DS] entry that the nlMatrixTopNEntries are sorted by, as well as a control for the table that the results will be reported in. This object may not be modified if the associated nlMatrixTopNControlStatus object is equal to active(1). If this value is less than or equal to 2, when the report is prepared, entries are created in the nlMatrixTopNTable associated with this object. If this value is greater than or equal to 3, when the report is prepared, entries are created in the nlMatrixTopNHighCapacityTable associated with this object.
.1.3.6.1.2.1.16.15.4.1.4,RMON2-MIB::nlMatrixTopNControlTimeRemaining,Integer32,read-create,,current,,The number of seconds left in the report currently being collected. When this object is modified by the management station, a new collection is started, possibly aborting a currently running report. The new value is used as the requested duration of this report and is immediately loaded into the associated nlMatrixTopNControlDuration object. When the report finishes, the probe will automatically start another collection with the same initial value of nlMatrixTopNControlTimeRemaining. Thus, the management station may simply read the resulting reports repeatedly, checking the startTime and duration each time to ensure that a report was not missed or that the report parameters were not changed. While the value of this object is non-zero, it decrements by one per second until it reaches zero. At the time that this object decrements to zero, the report is made accessible in the nlMatrixTopNTable, overwriting any report that may be there. When this object is modified by the management station, any associated entries in the nlMatrixTopNTable shall be deleted. (Note that this is a different algorithm than the one used in the hostTopNTable).
.1.3.6.1.2.1.16.15.4.1.5,RMON2-MIB::nlMatrixTopNControlGeneratedReports,Counter32,read-only,,current,,The number of reports that have been generated by this entry.
.1.3.6.1.2.1.16.15.4.1.6,RMON2-MIB::nlMatrixTopNControlDuration,Integer32,read-only,,current,,The number of seconds that this report has collected during the last sampling interval. When the associated nlMatrixTopNControlTimeRemaining object is set, this object shall be set by the probe to the same value and shall not be modified until the next time the nlMatrixTopNControlTimeRemaining is set. This value shall be zero if no reports have been requested for this nlMatrixTopNControlEntry.
.1.3.6.1.2.1.16.15.4.1.7,RMON2-MIB::nlMatrixTopNControlRequestedSize,Integer32,read-create,,current,,The maximum number of matrix entries requested for this report. When this object is created or modified, the probe should set nlMatrixTopNControlGrantedSize as closely to this object as possible for the particular probe implementation and available resources.
.1.3.6.1.2.1.16.15.4.1.8,RMON2-MIB::nlMatrixTopNControlGrantedSize,Integer32,read-only,,current,,The maximum number of matrix entries in this report. When the associated nlMatrixTopNControlRequestedSize object is created or modified, the probe should set this object as closely to the requested value as possible for the particular implementation and available resources. The probe must not lower this value except as a side-effect of a set to the associated nlMatrixTopNControlRequestedSize object. If the value of nlMatrixTopNControlRateBase is equal to nlMatrixTopNPkts, when the next topN report is generated, matrix entries with the highest value of nlMatrixTopNPktRate shall be placed in this table in decreasing order of this rate until there is no more room or until there are no more matrix entries. If the value of nlMatrixTopNControlRateBase is equal to nlMatrixTopNOctets, when the next topN report is generated, matrix entries with the highest value of nlMatrixTopNOctetRate shall be placed in this table in decreasing order of this rate until there is no more room or until there are no more matrix entries. It is an implementation-specific matter how entries with the same value of nlMatrixTopNPktRate or nlMatrixTopNOctetRate are sorted. It is also an implementation-specific matter as to whether zero-valued entries are available.
.1.3.6.1.2.1.16.15.4.1.9,RMON2-MIB::nlMatrixTopNControlStartTime,TimeTicks,read-only,,current,,The value of sysUpTime when this topN report was last started. In other words, this is the time that the associated nlMatrixTopNControlTimeRemaining object was modified to start the requested report or the time the report was last automatically (re)started. This object may be used by the management station to determine whether a report was missed.
.1.3.6.1.2.1.16.15.4.1.10,RMON2-MIB::nlMatrixTopNControlOwner,OCTET,read-create,,current,,The entity that configured this entry and is therefore using the resources assigned to it.
.1.3.6.1.2.1.16.15.4.1.11,RMON2-MIB::nlMatrixTopNControlStatus,INTEGER,read-create,,current,active(1):notInService(2):notReady(3):createAndGo(4):createAndWait(5):destroy(6),The status of this nlMatrixTopNControlEntry. An entry may not exist in the active state unless all objects in the entry have an appropriate value. If this object is not equal to active(1), all associated entries in the nlMatrixTopNTable shall be deleted by the agent.
.1.3.6.1.2.1.16.15.5,RMON2-MIB::nlMatrixTopNTable,,not-accessible,,current,,A set of statistics for those network-layer matrix entries that have counted the highest number of octets or packets.
.1.3.6.1.2.1.16.15.5.1,RMON2-MIB::nlMatrixTopNEntry,,not-accessible,nlMatrixTopNControlIndex:nlMatrixTopNIndex,current,,A conceptual row in the nlMatrixTopNTable. The nlMatrixTopNControlIndex value in the index identifies the nlMatrixTopNControlEntry on whose behalf this entry was created. An example of the indexing of this table is nlMatrixTopNPktRate.3.10
.1.3.6.1.2.1.16.15.5.1.1,RMON2-MIB::nlMatrixTopNIndex,Integer32,not-accessible,,current,,An index that uniquely identifies an entry in the nlMatrixTopNTable among those in the same report. This index is between 1 and N, where N is the number of entries in this report. If the value of nlMatrixTopNControlRateBase is equal to nlMatrixTopNPkts, increasing values of nlMatrixTopNIndex shall be assigned to entries with decreasing values of nlMatrixTopNPktRate until index N is assigned or there are no more nlMatrixTopNEntries. If the value of nlMatrixTopNControlRateBase is equal to nlMatrixTopNOctets, increasing values of nlMatrixTopNIndex shall be assigned to entries with decreasing values of nlMatrixTopNOctetRate until index N is assigned or there are no more nlMatrixTopNEntries.
.1.3.6.1.2.1.16.15.5.1.2,RMON2-MIB::nlMatrixTopNProtocolDirLocalIndex,Integer32,read-only,,current,,The protocolDirLocalIndex of the network-layer protocol of this entry's network address.
.1.3.6.1.2.1.16.15.5.1.3,RMON2-MIB::nlMatrixTopNSourceAddress,OCTET,read-only,,current,,The network-layer address of the source host in this conversation. This is represented as an octet string with specific semantics and length as identified by the associated nlMatrixTopNProtocolDirLocalIndex. For example, if the protocolDirLocalIndex indicates an encapsulation of IP, this object is encoded as a length octet of 4, followed by the 4 octets of the IP address, in network byte order.
.1.3.6.1.2.1.16.15.5.1.4,RMON2-MIB::nlMatrixTopNDestAddress,OCTET,read-only,,current,,The network-layer address of the destination host in this conversation. This is represented as an octet string with specific semantics and length as identified by the associated nlMatrixTopNProtocolDirLocalIndex. For example, if the nlMatrixTopNProtocolDirLocalIndex indicates an encapsulation of IP, this object is encoded as a length octet of 4, followed by the 4 octets of the IP address, in network byte order.
.1.3.6.1.2.1.16.15.5.1.5,RMON2-MIB::nlMatrixTopNPktRate,Gauge32,read-only,,current,,The number of packets seen from the source host to the destination host during this sampling interval, counted using the rules for counting the nlMatrixSDPkts object. If the value of nlMatrixTopNControlRateBase is nlMatrixTopNPkts, this variable will be used to sort this report.
.1.3.6.1.2.1.16.15.5.1.6,RMON2-MIB::nlMatrixTopNReversePktRate,Gauge32,read-only,,current,,The number of packets seen from the destination host to the source host during this sampling interval, counted using the rules for counting the nlMatrixSDPkts object. (Note that the corresponding nlMatrixSDPkts object selected is the one whose source address is equal to nlMatrixTopNDestAddress and whose destination address is equal to nlMatrixTopNSourceAddress.) Note that if the value of nlMatrixTopNControlRateBase is equal to nlMatrixTopNPkts, the sort of topN entries is based entirely on nlMatrixTopNPktRate, and not on the value of this object.
.1.3.6.1.2.1.16.15.5.1.7,RMON2-MIB::nlMatrixTopNOctetRate,Gauge32,read-only,,current,,The number of octets seen from the source host to the destination host during this sampling interval, counted using the rules for counting the nlMatrixSDOctets object. If the value of nlMatrixTopNControlRateBase is nlMatrixTopNOctets, this variable will be used to sort this report.
.1.3.6.1.2.1.16.15.5.1.8,RMON2-MIB::nlMatrixTopNReverseOctetRate,Gauge32,read-only,,current,,The number of octets seen from the destination host to the source host during this sampling interval, counted using the rules for counting the nlMatrixDSOctets object. (Note that the corresponding nlMatrixSDOctets object selected is the one whose source address is equal to nlMatrixTopNDestAddress and whose destination address is equal to nlMatrixTopNSourceAddress.) Note that if the value of nlMatrixTopNControlRateBase is equal to nlMatrixTopNOctets, the sort of topN entries is based entirely on nlMatrixTopNOctetRate, and not on the value of this object.
.1.3.6.1.2.1.16.16,RMON2-MIB::alHost,,,,,,
.1.3.6.1.2.1.16.16.1,RMON2-MIB::alHostTable,,not-accessible,,current,,A collection of statistics for a particular protocol from a particular network address that has been discovered on an interface of this device. The probe will populate this table for all protocols in the protocol directory table whose value of protocolDirHostConfig is equal to supportedOn(3), and will delete any entries whose protocolDirEntry is deleted or has a protocolDirHostConfig value of supportedOff(2). The probe will add to this table all addresses seen as the source or destination address in all packets with no MAC errors and will increment octet and packet counts in the table for all packets with no MAC errors. Further, entries will only be added to this table if their address exists in the nlHostTable and will be deleted from this table if their address is deleted from the nlHostTable.
.1.3.6.1.2.1.16.16.1.1,RMON2-MIB::alHostEntry,,not-accessible,hlHostControlIndex:alHostTimeMark:protocolDirLocalIndex:nlHostAddress:protocolDirLocalIndex,current,,A conceptual row in the alHostTable. The hlHostControlIndex value in the index identifies the hlHostControlEntry on whose behalf this entry was created. The first protocolDirLocalIndex value in the index identifies the network-layer protocol of the address. The nlHostAddress value in the index identifies the network- layer address of this entry. The second protocolDirLocalIndex value in the index identifies the protocol that is counted by this entry. An example of the indexing in this entry is alHostOutPkts.1.783495.18.4.128.2.6.6.34. Note that some combinations of index values may result in an index that exceeds 128 sub-identifiers in length, which exceeds the maximum for the SNMP protocol. Implementations should take care to avoid such combinations.
.1.3.6.1.2.1.16.16.1.1.1,RMON2-MIB::alHostTimeMark,TimeTicks,not-accessible,,current,,A TimeFilter for this entry. See the TimeFilter textual convention to see how this works.
.1.3.6.1.2.1.16.16.1.1.2,RMON2-MIB::alHostInPkts,Gauge32,read-only,,current,,The number of packets of this protocol type without errors transmitted to this address since it was added to the alHostTable. Note that this is the number of link-layer packets, so if a single network-layer packet is fragmented into several link-layer frames, this counter is incremented several times.
.1.3.6.1.2.1.16.16.1.1.3,RMON2-MIB::alHostOutPkts,Gauge32,read-only,,current,,The number of packets of this protocol type without errors transmitted by this address since it was added to the alHostTable. Note that this is the number of link-layer packets, so if a single network-layer packet is fragmented into several link-layer frames, this counter is incremented several times.
.1.3.6.1.2.1.16.16.1.1.4,RMON2-MIB::alHostInOctets,Gauge32,read-only,,current,,The number of octets transmitted to this address of this protocol type since it was added to the alHostTable (excluding framing bits, but including FCS octets), excluding octets in packets that contained errors. Note that this doesn't count just those octets in the particular protocol frames but includes the entire packet that contained the protocol.
.1.3.6.1.2.1.16.16.1.1.5,RMON2-MIB::alHostOutOctets,Gauge32,read-only,,current,,The number of octets transmitted by this address of this protocol type since it was added to the alHostTable (excluding framing bits, but including FCS octets), excluding octets in packets that contained errors. Note that this doesn't count just those octets in the particular protocol frames but includes the entire packet that contained the protocol.
.1.3.6.1.2.1.16.16.1.1.6,RMON2-MIB::alHostCreateTime,TimeTicks,read-only,,current,,The value of sysUpTime when this entry was last activated. This can be used by the management station to ensure that the entry has not been deleted and recreated between polls.
.1.3.6.1.2.1.16.17,RMON2-MIB::alMatrix,,,,,,
.1.3.6.1.2.1.16.17.1,RMON2-MIB::alMatrixSDTable,,not-accessible,,current,,A list of application traffic matrix entries that collect statistics for conversations of a particular protocol between two network-level addresses. This table is indexed first by the source address and then by the destination address to make it convenient to collect all statistics from a particular address. The probe will populate this table for all protocols in the protocol directory table whose value of protocolDirMatrixConfig is equal to supportedOn(3), and will delete any entries whose protocolDirEntry is deleted or has a protocolDirMatrixConfig value of supportedOff(2). The probe will add to this table all pairs of addresses for all protocols seen in all packets with no MAC errors and will increment octet and packet counts in the table for all packets with no MAC errors. Further, entries will only be added to this table if their address pair exists in the nlMatrixSDTable and will be deleted from this table if the address pair is deleted from the nlMatrixSDTable.
.1.3.6.1.2.1.16.17.1.1,RMON2-MIB::alMatrixSDEntry,,not-accessible,hlMatrixControlIndex:alMatrixSDTimeMark:protocolDirLocalIndex:nlMatrixSDSourceAddress:nlMatrixSDDestAddress:protocolDirLocalIndex,current,,A conceptual row in the alMatrixSDTable. The hlMatrixControlIndex value in the index identifies the hlMatrixControlEntry on whose behalf this entry was created. The first protocolDirLocalIndex value in the index identifies the network-layer protocol of the nlMatrixSDSourceAddress and nlMatrixSDDestAddress. The nlMatrixSDSourceAddress value in the index identifies the network-layer address of the source host in this conversation. The nlMatrixSDDestAddress value in the index identifies the network-layer address of the destination host in this conversation. The second protocolDirLocalIndex value in the index identifies the protocol that is counted by this entry. An example of the indexing of this entry is alMatrixSDPkts.1.783495.18.4.128.2.6.6.4.128.2.6.7.34. Note that some combinations of index values may result in an index that exceeds 128 sub-identifiers in length, which exceeds the maximum for the SNMP protocol. Implementations should take care to avoid such combinations.
.1.3.6.1.2.1.16.17.1.1.1,RMON2-MIB::alMatrixSDTimeMark,TimeTicks,not-accessible,,current,,A TimeFilter for this entry. See the TimeFilter textual convention to see how this works.
.1.3.6.1.2.1.16.17.1.1.2,RMON2-MIB::alMatrixSDPkts,Gauge32,read-only,,current,,The number of packets of this protocol type without errors transmitted from the source address to the destination address since this entry was added to the alMatrixSDTable. Note that this is the number of link-layer packets, so if a single network-layer packet is fragmented into several link-layer frames, this counter is incremented several times.
.1.3.6.1.2.1.16.17.1.1.3,RMON2-MIB::alMatrixSDOctets,Gauge32,read-only,,current,,The number of octets in packets of this protocol type transmitted from the source address to the destination address since this entry was added to the alMatrixSDTable (excluding framing bits, but including FCS octets), excluding octets in packets that contained errors. Note that this doesn't count just those octets in the particular protocol frames but includes the entire packet that contained the protocol.
.1.3.6.1.2.1.16.17.1.1.4,RMON2-MIB::alMatrixSDCreateTime,TimeTicks,read-only,,current,,The value of sysUpTime when this entry was last activated. This can be used by the management station to ensure that the entry has not been deleted and recreated between polls.
.1.3.6.1.2.1.16.17.2,RMON2-MIB::alMatrixDSTable,,not-accessible,,current,,A list of application traffic matrix entries that collect statistics for conversations of a particular protocol between two network-level addresses. This table is indexed first by the destination address and then by the source address to make it convenient to collect all statistics to a particular address. The probe will populate this table for all protocols in the protocol directory table whose value of protocolDirMatrixConfig is equal to supportedOn(3), and will delete any entries whose protocolDirEntry is deleted or has a protocolDirMatrixConfig value of supportedOff(2). The probe will add to this table all pairs of addresses for all protocols seen in all packets with no MAC errors and will increment octet and packet counts in the table for all packets with no MAC errors. Further, entries will only be added to this table if their address pair exists in the nlMatrixDSTable and will be deleted from this table if the address pair is deleted from the nlMatrixDSTable.
.1.3.6.1.2.1.16.17.2.1,RMON2-MIB::alMatrixDSEntry,,not-accessible,hlMatrixControlIndex:alMatrixDSTimeMark:protocolDirLocalIndex:nlMatrixDSDestAddress:nlMatrixDSSourceAddress:protocolDirLocalIndex,current,,A conceptual row in the alMatrixDSTable. The hlMatrixControlIndex value in the index identifies the hlMatrixControlEntry on whose behalf this entry was created. The first protocolDirLocalIndex value in the index identifies the network-layer protocol of the alMatrixDSSourceAddress and alMatrixDSDestAddress. The nlMatrixDSDestAddress value in the index identifies the network-layer address of the destination host in this conversation. The nlMatrixDSSourceAddress value in the index identifies the network-layer address of the source host in this conversation. The second protocolDirLocalIndex value in the index identifies the protocol that is counted by this entry. An example of the indexing of this entry is alMatrixDSPkts.1.783495.18.4.128.2.6.7.4.128.2.6.6.34. Note that some combinations of index values may result in an index that exceeds 128 sub-identifiers in length, which exceeds the maximum for the SNMP protocol. Implementations should take care to avoid such combinations.
.1.3.6.1.2.1.16.17.2.1.1,RMON2-MIB::alMatrixDSTimeMark,TimeTicks,not-accessible,,current,,A TimeFilter for this entry. See the TimeFilter textual convention to see how this works.
.1.3.6.1.2.1.16.17.2.1.2,RMON2-MIB::alMatrixDSPkts,Gauge32,read-only,,current,,The number of packets of this protocol type without errors transmitted from the source address to the destination address since this entry was added to the alMatrixDSTable. Note that this is the number of link-layer packets, so if a single network-layer packet is fragmented into several link-layer frames, this counter is incremented several times.
.1.3.6.1.2.1.16.17.2.1.3,RMON2-MIB::alMatrixDSOctets,Gauge32,read-only,,current,,The number of octets in packets of this protocol type transmitted from the source address to the destination address since this entry was added to the alMatrixDSTable (excluding framing bits, but including FCS octets), excluding octets in packets that contained errors. Note that this doesn't count just those octets in the particular protocol frames but includes the entire packet that contained the protocol.
.1.3.6.1.2.1.16.17.2.1.4,RMON2-MIB::alMatrixDSCreateTime,TimeTicks,read-only,,current,,The value of sysUpTime when this entry was last activated. This can be used by the management station to ensure that the entry has not been deleted and recreated between polls.
.1.3.6.1.2.1.16.17.3,RMON2-MIB::alMatrixTopNControlTable,,not-accessible,,current,,A set of parameters that control the creation of a report of the top N matrix entries according to a selected metric.
.1.3.6.1.2.1.16.17.3.1,RMON2-MIB::alMatrixTopNControlEntry,,not-accessible,alMatrixTopNControlIndex,current,,A conceptual row in the alMatrixTopNControlTable. An example of the indexing of this table is alMatrixTopNControlDuration.3
.1.3.6.1.2.1.16.17.3.1.1,RMON2-MIB::alMatrixTopNControlIndex,Integer32,not-accessible,,current,,An index that uniquely identifies an entry in the alMatrixTopNControlTable. Each such entry defines one topN report prepared for one interface.
.1.3.6.1.2.1.16.17.3.1.2,RMON2-MIB::alMatrixTopNControlMatrixIndex,Integer32,read-create,,current,,The alMatrix[SD/DS] table for which a topN report will be prepared on behalf of this entry. The alMatrix[SD/DS] table is identified by the value of the hlMatrixControlIndex for that table - that value is used here to identify the particular table. This object may not be modified if the associated alMatrixTopNControlStatus object is equal to active(1).
.1.3.6.1.2.1.16.17.3.1.3,RMON2-MIB::alMatrixTopNControlRateBase,INTEGER,read-create,,current,alMatrixTopNTerminalsPkts(1):alMatrixTopNTerminalsOctets(2):alMatrixTopNAllPkts(3):alMatrixTopNAllOctets(4):alMatrixTopNTerminalsHighCapacityPkts(5):alMatrixTopNTerminalsHighCapacityOctets(6):alMatrixTopNAllHighCapacityPkts(7):alMatrixTopNAllHighCapacityOctets(8),This object controls which alMatrix[SD/DS] entry that the alMatrixTopNEntries are sorted by, which view of the matrix table that will be used, as well as which table the results will be reported in. The values alMatrixTopNTerminalsPkts, alMatrixTopNTerminalsOctets, alMatrixTopNTerminalsHighCapacityPkts, and alMatrixTopNTerminalsHighCapacityOctets cause collection only from protocols that have no child protocols that are counted. The values alMatrixTopNAllPkts, alMatrixTopNAllOctets, alMatrixTopNAllHighCapacityPkts, and alMatrixTopNAllHighCapacityOctets cause collection from all alMatrix entries. This object may not be modified if the associated alMatrixTopNControlStatus object is equal to active(1).
.1.3.6.1.2.1.16.17.3.1.4,RMON2-MIB::alMatrixTopNControlTimeRemaining,Integer32,read-create,,current,,The number of seconds left in the report currently being collected. When this object is modified by the management station, a new collection is started, possibly aborting a currently running report. The new value is used as the requested duration of this report and is immediately loaded into the associated alMatrixTopNControlDuration object. When the report finishes, the probe will automatically start another collection with the same initial value of alMatrixTopNControlTimeRemaining. Thus, the management station may simply read the resulting reports repeatedly, checking the startTime and duration each time to ensure that a report was not missed or that the report parameters were not changed. While the value of this object is non-zero, it decrements by one per second until it reaches zero. At the time that this object decrements to zero, the report is made accessible in the alMatrixTopNTable, overwriting any report that may be there. When this object is modified by the management station, any associated entries in the alMatrixTopNTable shall be deleted. (Note that this is a different algorithm than the one used in the hostTopNTable).
.1.3.6.1.2.1.16.17.3.1.5,RMON2-MIB::alMatrixTopNControlGeneratedReports,Counter32,read-only,,current,,The number of reports that have been generated by this entry.
.1.3.6.1.2.1.16.17.3.1.6,RMON2-MIB::alMatrixTopNControlDuration,Integer32,read-only,,current,,The number of seconds that this report has collected during the last sampling interval. When the associated alMatrixTopNControlTimeRemaining object is set, this object shall be set by the probe to the same value and shall not be modified until the next time the alMatrixTopNControlTimeRemaining is set. This value shall be zero if no reports have been requested for this alMatrixTopNControlEntry.
.1.3.6.1.2.1.16.17.3.1.7,RMON2-MIB::alMatrixTopNControlRequestedSize,Integer32,read-create,,current,,The maximum number of matrix entries requested for this report. When this object is created or modified, the probe should set alMatrixTopNControlGrantedSize as closely to this object as possible for the particular probe implementation and available resources.
.1.3.6.1.2.1.16.17.3.1.8,RMON2-MIB::alMatrixTopNControlGrantedSize,Integer32,read-only,,current,,The maximum number of matrix entries in this report. When the associated alMatrixTopNControlRequestedSize object is created or modified, the probe should set this object as closely to the requested value as possible for the particular implementation and available resources. The probe must not lower this value except as a side-effect of a set to the associated alMatrixTopNControlRequestedSize object. If the value of alMatrixTopNControlRateBase is equal to alMatrixTopNTerminalsPkts or alMatrixTopNAllPkts, when the next topN report is generated, matrix entries with the highest value of alMatrixTopNPktRate shall be placed in this table in decreasing order of this rate until there is no more room or until there are no more matrix entries. If the value of alMatrixTopNControlRateBase is equal to alMatrixTopNTerminalsOctets or alMatrixTopNAllOctets, when the next topN report is generated, matrix entries with the highest value of alMatrixTopNOctetRate shall be placed in this table in decreasing order of this rate until there is no more room or until there are no more matrix entries. It is an implementation-specific matter how entries with the same value of alMatrixTopNPktRate or alMatrixTopNOctetRate are sorted. It is also an implementation-specific matter as to whether zero-valued entries are available.
.1.3.6.1.2.1.16.17.3.1.9,RMON2-MIB::alMatrixTopNControlStartTime,TimeTicks,read-only,,current,,The value of sysUpTime when this topN report was last started. In other words, this is the time that the associated alMatrixTopNControlTimeRemaining object was modified to start the requested report or the time the report was last automatically (re)started. This object may be used by the management station to determine whether a report was missed.
.1.3.6.1.2.1.16.17.3.1.10,RMON2-MIB::alMatrixTopNControlOwner,OCTET,read-create,,current,,The entity that configured this entry and is therefore using the resources assigned to it.
.1.3.6.1.2.1.16.17.3.1.11,RMON2-MIB::alMatrixTopNControlStatus,INTEGER,read-create,,current,active(1):notInService(2):notReady(3):createAndGo(4):createAndWait(5):destroy(6),The status of this alMatrixTopNControlEntry. An entry may not exist in the active state unless all objects in the entry have an appropriate value. If this object is not equal to active(1), all associated entries in the alMatrixTopNTable shall be deleted by the agent.
.1.3.6.1.2.1.16.17.4,RMON2-MIB::alMatrixTopNTable,,not-accessible,,current,,A set of statistics for those application-layer matrix entries that have counted the highest number of octets or packets.
.1.3.6.1.2.1.16.17.4.1,RMON2-MIB::alMatrixTopNEntry,,not-accessible,alMatrixTopNControlIndex:alMatrixTopNIndex,current,,A conceptual row in the alMatrixTopNTable. The alMatrixTopNControlIndex value in the index identifies the alMatrixTopNControlEntry on whose behalf this entry was created. An example of the indexing of this table is alMatrixTopNPktRate.3.10
.1.3.6.1.2.1.16.17.4.1.1,RMON2-MIB::alMatrixTopNIndex,Integer32,not-accessible,,current,,An index that uniquely identifies an entry in the alMatrixTopNTable among those in the same report. This index is between 1 and N, where N is the number of entries in this report. If the value of alMatrixTopNControlRateBase is equal to alMatrixTopNTerminalsPkts or alMatrixTopNAllPkts, increasing values of alMatrixTopNIndex shall be assigned to entries with decreasing values of alMatrixTopNPktRate until index N is assigned or there are no more alMatrixTopNEntries. If the value of alMatrixTopNControlRateBase is equal to alMatrixTopNTerminalsOctets or alMatrixTopNAllOctets, increasing values of alMatrixTopNIndex shall be assigned to entries with decreasing values of alMatrixTopNOctetRate until index N is assigned or there are no more alMatrixTopNEntries.
.1.3.6.1.2.1.16.17.4.1.2,RMON2-MIB::alMatrixTopNProtocolDirLocalIndex,Integer32,read-only,,current,,The protocolDirLocalIndex of the network-layer protocol of this entry's network address.
.1.3.6.1.2.1.16.17.4.1.3,RMON2-MIB::alMatrixTopNSourceAddress,OCTET,read-only,,current,,The network-layer address of the source host in this conversation. This is represented as an octet string with specific semantics and length as identified by the associated alMatrixTopNProtocolDirLocalIndex. For example, if the alMatrixTopNProtocolDirLocalIndex indicates an encapsulation of IP, this object is encoded as a length octet of 4, followed by the 4 octets of the IP address, in network byte order.
.1.3.6.1.2.1.16.17.4.1.4,RMON2-MIB::alMatrixTopNDestAddress,OCTET,read-only,,current,,The network-layer address of the destination host in this conversation. This is represented as an octet string with specific semantics and length as identified by the associated alMatrixTopNProtocolDirLocalIndex. For example, if the alMatrixTopNProtocolDirLocalIndex indicates an encapsulation of IP, this object is encoded as a length octet of 4, followed by the 4 octets of the IP address, in network byte order.
.1.3.6.1.2.1.16.17.4.1.5,RMON2-MIB::alMatrixTopNAppProtocolDirLocalIndex,Integer32,read-only,,current,,The type of the protocol counted by this matrix entry.
.1.3.6.1.2.1.16.17.4.1.6,RMON2-MIB::alMatrixTopNPktRate,Gauge32,read-only,,current,,The number of packets seen of this protocol from the source host to the destination host during this sampling interval, counted using the rules for counting the alMatrixSDPkts object. If the value of alMatrixTopNControlRateBase is alMatrixTopNTerminalsPkts or alMatrixTopNAllPkts, this variable will be used to sort this report.
.1.3.6.1.2.1.16.17.4.1.7,RMON2-MIB::alMatrixTopNReversePktRate,Gauge32,read-only,,current,,The number of packets seen of this protocol from the destination host to the source host during this sampling interval, counted using the rules for counting the alMatrixDSPkts object. (Note that the corresponding alMatrixSDPkts object selected is the one whose source address is equal to alMatrixTopNDestAddress and whose destination address is equal to alMatrixTopNSourceAddress.) Note that if the value of alMatrixTopNControlRateBase is equal to alMatrixTopNTerminalsPkts or alMatrixTopNAllPkts, the sort of topN entries is based entirely on alMatrixTopNPktRate, and not on the value of this object.
.1.3.6.1.2.1.16.17.4.1.8,RMON2-MIB::alMatrixTopNOctetRate,Gauge32,read-only,,current,,The number of octets seen of this protocol from the source host to the destination host during this sampling interval, counted using the rules for counting the alMatrixSDOctets object. If the value of alMatrixTopNControlRateBase is alMatrixTopNTerminalsOctets or alMatrixTopNAllOctets, this variable will be used to sort this report.
.1.3.6.1.2.1.16.17.4.1.9,RMON2-MIB::alMatrixTopNReverseOctetRate,Gauge32,read-only,,current,,The number of octets seen of this protocol from the destination host to the source host during this sampling interval, counted using the rules for counting the alMatrixDSOctets object. (Note that the corresponding alMatrixSDOctets object selected is the one whose source address is equal to alMatrixTopNDestAddress and whose destination address is equal to alMatrixTopNSourceAddress.) Note that if the value of alMatrixTopNControlRateBase is equal to alMatrixTopNTerminalsOctets or alMatrixTopNAllOctets, the sort of topN entries is based entirely on alMatrixTopNOctetRate, and not on the value of this object.
.1.3.6.1.2.1.16.18,RMON2-MIB::usrHistory,,,,,,
.1.3.6.1.2.1.16.18.1,RMON2-MIB::usrHistoryControlTable,,not-accessible,,current,,A list of data-collection configuration entries.
.1.3.6.1.2.1.16.18.1.1,RMON2-MIB::usrHistoryControlEntry,,not-accessible,usrHistoryControlIndex,current,,A list of parameters that set up a group of user-defined MIB objects to be sampled periodically (called a bucket-group). For example, an instance of usrHistoryControlInterval might be named usrHistoryControlInterval.1
.1.3.6.1.2.1.16.18.1.1.1,RMON2-MIB::usrHistoryControlIndex,Integer32,not-accessible,,current,,An index that uniquely identifies an entry in the usrHistoryControlTable. Each such entry defines a set of samples at a particular interval for a specified set of MIB instances available from the managed system.
.1.3.6.1.2.1.16.18.1.1.2,RMON2-MIB::usrHistoryControlObjects,Integer32,read-create,,current,,The number of MIB objects to be collected in the portion of usrHistoryTable associated with this usrHistoryControlEntry. This object may not be modified if the associated instance of usrHistoryControlStatus is equal to active(1).
.1.3.6.1.2.1.16.18.1.1.3,RMON2-MIB::usrHistoryControlBucketsRequested,Integer32,read-create,,current,,The requested number of discrete time intervals over which data is to be saved in the part of the usrHistoryTable associated with this usrHistoryControlEntry. When this object is created or modified, the probe should set usrHistoryControlBucketsGranted as closely to this object as possible for the particular probe implementation and available resources.
.1.3.6.1.2.1.16.18.1.1.4,RMON2-MIB::usrHistoryControlBucketsGranted,Integer32,read-only,,current,,The number of discrete sampling intervals over which data shall be saved in the part of the usrHistoryTable associated with this usrHistoryControlEntry. When the associated usrHistoryControlBucketsRequested object is created or modified, the probe should set this object as closely to the requested value as possible for the particular probe implementation and available resources. The probe must not lower this value except as a result of a modification to the associated usrHistoryControlBucketsRequested object. The associated usrHistoryControlBucketsRequested object should be set before or at the same time as this object to allow the probe to accurately estimate the resources required for this usrHistoryControlEntry. There will be times when the actual number of buckets associated with this entry is less than the value of this object. In this case, at the end of each sampling interval, a new bucket will be added to the usrHistoryTable. When the number of buckets reaches the value of this object and a new bucket is to be added to the usrHistoryTable, the oldest bucket associated with this usrHistoryControlEntry shall be deleted by the agent so that the new bucket can be added. When the value of this object changes to a value less than the current value, entries are deleted from the usrHistoryTable associated with this usrHistoryControlEntry. Enough of the oldest of these entries shall be deleted by the agent so that their number remains less than or equal to the new value of this object. When the value of this object changes to a value greater than the current value, the number of associated usrHistory entries may be allowed to grow.
.1.3.6.1.2.1.16.18.1.1.5,RMON2-MIB::usrHistoryControlInterval,Integer32,read-create,,current,,The interval in seconds over which the data is sampled for each bucket in the part of the usrHistory table associated with this usrHistoryControlEntry. Because the counters in a bucket may overflow at their maximum value with no indication, a prudent manager will take into account the possibility of overflow in any of the associated counters. It is important to consider the minimum time in which any counter could overflow on a particular media type and to set the usrHistoryControlInterval object to a value less than this interval. This object may not be modified if the associated usrHistoryControlStatus object is equal to active(1).
.1.3.6.1.2.1.16.18.1.1.6,RMON2-MIB::usrHistoryControlOwner,OCTET,read-create,,current,,The entity that configured this entry and is therefore using the resources assigned to it.
.1.3.6.1.2.1.16.18.1.1.7,RMON2-MIB::usrHistoryControlStatus,INTEGER,read-create,,current,active(1):notInService(2):notReady(3):createAndGo(4):createAndWait(5):destroy(6),The status of this variable history control entry. An entry may not exist in the active state unless all objects in the entry have an appropriate value. If this object is not equal to active(1), all associated entries in the usrHistoryTable shall be deleted.
.1.3.6.1.2.1.16.18.2,RMON2-MIB::usrHistoryObjectTable,,not-accessible,,current,,A list of data-collection configuration entries.
.1.3.6.1.2.1.16.18.2.1,RMON2-MIB::usrHistoryObjectEntry,,not-accessible,usrHistoryControlIndex:usrHistoryObjectIndex,current,,A list of MIB instances to be sampled periodically. Entries in this table are created when an associated usrHistoryControlObjects object is created. The usrHistoryControlIndex value in the index is that of the associated usrHistoryControlEntry. For example, an instance of usrHistoryObjectVariable might be usrHistoryObjectVariable.1.3
.1.3.6.1.2.1.16.18.2.1.1,RMON2-MIB::usrHistoryObjectIndex,Integer32,not-accessible,,current,,An index used to uniquely identify an entry in the usrHistoryObject table. Each such entry defines a MIB instance to be collected periodically.
.1.3.6.1.2.1.16.18.2.1.2,RMON2-MIB::usrHistoryObjectVariable,OBJECT,read-create,,current,,The object identifier of the particular variable to be sampled. Only variables that resolve to an ASN.1 primitive type of Integer32 (Integer32, Counter, Gauge, or TimeTicks) may be sampled. Because SNMP access control is articulated entirely in terms of the contents of MIB views, no access control mechanism exists that can restrict the value of this object to identify only those objects that exist in a particular MIB view. Because there is thus no acceptable means of restricting the read access that could be obtained through the user history mechanism, the probe must only grant write access to this object in those views that have read access to all objects on the probe. See USM [RFC3414] and VACM [RFC3415] for more information. During a set operation, if the supplied variable name is not available in the selected MIB view, a badValue error must be returned. This object may not be modified if the associated usrHistoryControlStatus object is equal to active(1).
.1.3.6.1.2.1.16.18.2.1.3,RMON2-MIB::usrHistoryObjectSampleType,INTEGER,read-create,,current,absoluteValue(1):deltaValue(2),The method of sampling the selected variable for storage in the usrHistoryTable. If the value of this object is absoluteValue(1), the value of the selected variable will be copied directly into the history bucket. If the value of this object is deltaValue(2), the value of the selected variable at the last sample will be subtracted from the current value, and the difference will be stored in the history bucket. If the associated usrHistoryObjectVariable instance could not be obtained at the previous sample interval, then a delta sample is not possible, and the value of the associated usrHistoryValStatus object for this interval will be valueNotAvailable(1). This object may not be modified if the associated usrHistoryControlStatus object is equal to active(1).
.1.3.6.1.2.1.16.18.3,RMON2-MIB::usrHistoryTable,,not-accessible,,current,,A list of user-defined history entries.
.1.3.6.1.2.1.16.18.3.1,RMON2-MIB::usrHistoryEntry,,not-accessible,usrHistoryControlIndex:usrHistorySampleIndex:usrHistoryObjectIndex,current,,A historical sample of user-defined variables. This sample is associated with the usrHistoryControlEntry that set up the parameters for a regular collection of these samples. The usrHistoryControlIndex value in the index identifies the usrHistoryControlEntry on whose behalf this entry was created. The usrHistoryObjectIndex value in the index identifies the usrHistoryObjectEntry on whose behalf this entry was created. For example, an instance of usrHistoryAbsValue, which represents the 14th sample of a variable collected as specified by usrHistoryControlEntry.1 and usrHistoryObjectEntry.1.5, would be named usrHistoryAbsValue.1.14.5
.1.3.6.1.2.1.16.18.3.1.1,RMON2-MIB::usrHistorySampleIndex,Integer32,not-accessible,,current,,An index that uniquely identifies the particular sample this entry represents among all samples associated with the same usrHistoryControlEntry. This index starts at 1 and increases by one as each new sample is taken.
.1.3.6.1.2.1.16.18.3.1.2,RMON2-MIB::usrHistoryIntervalStart,TimeTicks,read-only,,current,,The value of sysUpTime at the start of the interval over which this sample was measured. If the probe keeps track of the time of day, it should start the first sample of the history at a time such that when the next hour of the day begins, a sample is started at that instant. Note that following this rule may require that the probe delay collecting the first sample of the history, as each sample must be of the same interval. Also note that the sample that is currently being collected is not accessible in this table until the end of its interval.
.1.3.6.1.2.1.16.18.3.1.3,RMON2-MIB::usrHistoryIntervalEnd,TimeTicks,read-only,,current,,The value of sysUpTime at the end of the interval over which this sample was measured.
.1.3.6.1.2.1.16.18.3.1.4,RMON2-MIB::usrHistoryAbsValue,Gauge32,read-only,,current,,The absolute value (i.e., unsigned value) of the user-specified statistic during the last sampling period. The value during the current sampling period is not made available until the period is completed. To obtain the true value for this sampling interval, the associated instance of usrHistoryValStatus must be checked, and usrHistoryAbsValue adjusted as necessary. If the MIB instance could not be accessed during the sampling interval, then this object will have a value of zero, and the associated instance of usrHistoryValStatus will be set to 'valueNotAvailable(1)'. The access control check prescribed in the definition of usrHistoryObjectVariable SHOULD be checked for each sampling interval. If this check determines that access should not be allowed, then this object will have a value of zero, and the associated instance of usrHistoryValStatus will be set to 'valueNotAvailable(1)'.
.1.3.6.1.2.1.16.18.3.1.5,RMON2-MIB::usrHistoryValStatus,INTEGER,read-only,,current,valueNotAvailable(1):valuePositive(2):valueNegative(3),This object indicates the validity and sign of the data in the associated instance of usrHistoryAbsValue. If the MIB instance could not be accessed during the sampling interval, then 'valueNotAvailable(1)' will be returned. If the sample is valid and the actual value of the sample is greater than or equal to zero, then 'valuePositive(2)' is returned. If the sample is valid and the actual value of the sample is less than zero, 'valueNegative(3)' will be returned. The associated instance of usrHistoryAbsValue should be multiplied by -1 to obtain the true sample value.
.1.3.6.1.2.1.16.19,RMON2-MIB::probeConfig,,,,,,
.1.3.6.1.2.1.16.19.1,RMON2-MIB::probeCapabilities,BITS,read-only,,current,etherStats(0):historyControl(1):etherHistory(2):alarm(3):hosts(4):hostTopN(5):matrix(6):filter(7):capture(8):event(9):tokenRingMLStats(10):tokenRingPStats(11):tokenRingMLHistory(12):tokenRingPHistory(13):ringStation(14):ringStationOrder(15):ringStationConfig(16):sourceRouting(17):protocolDirectory(18):protocolDistribution(19):addressMapping(20):nlHost(21):nlMatrix(22):alHost(23):alMatrix(24):usrHistory(25):probeConfig(26),An indication of the RMON MIB groups supported on at least one interface by this probe.
.1.3.6.1.2.1.16.19.2,RMON2-MIB::probeSoftwareRev,OCTET,read-only,,current,,The software revision of this device. This string will have a zero length if the revision is unknown.
.1.3.6.1.2.1.16.19.3,RMON2-MIB::probeHardwareRev,OCTET,read-only,,current,,The hardware revision of this device. This string will have a zero length if the revision is unknown.
.1.3.6.1.2.1.16.19.4,RMON2-MIB::probeDateTime,OCTET,read-write,,current,,Probe's current date and time. field octets contents range ----- ------ -------- ----- 1 1-2 year 0..65536 2 3 month 1..12 3 4 day 1..31 4 5 hour 0..23 5 6 minutes 0..59 6 7 seconds 0..60 (use 60 for leap-second) 7 8 deci-seconds 0..9 8 9 direction from UTC '+' / '-' 9 10 hours from UTC 0..11 10 11 minutes from UTC 0..59 For example, Tuesday May 26, 1992 at 1:30:15 PM EDT would be displayed as: 1992-5-26,13:30:15.0,-4:0 Note that if only local time is known, then time zone information (fields 8-10) is not present, and that if no time information is known, the null string is returned.
.1.3.6.1.2.1.16.19.5,RMON2-MIB::probeResetControl,INTEGER,read-write,,current,running(1):warmBoot(2):coldBoot(3),Setting this object to warmBoot(2) causes the device to restart the application software with current configuration parameters saved in non-volatile memory. Setting this object to coldBoot(3) causes the device to reinitialize configuration parameters in non-volatile memory to default values and to restart the application software. When the device is running normally, this variable has a value of running(1).
.1.3.6.1.2.1.16.19.6,RMON2-MIB::probeDownloadFile,OCTET,read-write,,deprecated,,The file name to be downloaded from the TFTP server when a download is next requested via this MIB. This value is set to the zero-length string when no file name has been specified. This object has been deprecated, as it has not had enough independent implementations to demonstrate interoperability to meet the requirements of a Draft Standard.
.1.3.6.1.2.1.16.19.7,RMON2-MIB::probeDownloadTFTPServer,IpAddress,read-write,,deprecated,,The IP address of the TFTP server that contains the boot image to load when a download is next requested via this MIB. This value is set to '0.0.0.0' when no IP address has been specified. This object has been deprecated, as it has not had enough independent implementations to demonstrate interoperability to meet the requirements of a Draft Standard.
.1.3.6.1.2.1.16.19.8,RMON2-MIB::probeDownloadAction,INTEGER,read-write,,deprecated,notDownloading(1):downloadToPROM(2):downloadToRAM(3),When this object is set to downloadToRAM(3) or downloadToPROM(2), the device will discontinue its normal operation and begin download of the image specified by probeDownloadFile from the server specified by probeDownloadTFTPServer using the TFTP protocol. If downloadToRAM(3) is specified, the new image is copied to RAM only (the old image remains unaltered in the flash EPROM). If downloadToPROM(2) is specified, the new image is written to the flash EPROM memory after its checksum has been verified to be correct. When the download process is completed, the device will warm boot to restart the newly loaded application. When the device is not downloading, this object will have a value of notDownloading(1). This object has been deprecated, as it has not had enough independent implementations to demonstrate interoperability to meet the requirements of a Draft Standard.
.1.3.6.1.2.1.16.19.9,RMON2-MIB::probeDownloadStatus,INTEGER,read-only,,deprecated,downloadSuccess(1):downloadStatusUnknown(2):downloadGeneralError(3):downloadNoResponseFromServer(4):downloadChecksumError(5):downloadIncompatibleImage(6):downloadTftpFileNotFound(7):downloadTftpAccessViolation(8),The status of the last download procedure, if any. This object will have a value of downloadStatusUnknown(2) if no download process has been performed. This object has been deprecated, as it has not had enough independent implementations to demonstrate interoperability to meet the requirements of a Draft Standard.
.1.3.6.1.2.1.16.19.10,RMON2-MIB::serialConfigTable,,not-accessible,,deprecated,,A table of serial interface configuration entries. This data will be stored in non-volatile memory and preserved across probe resets or power loss. This table has been deprecated, as it has not had enough independent implementations to demonstrate interoperability to meet the requirements of a Draft Standard.
.1.3.6.1.2.1.16.19.10.1,RMON2-MIB::serialConfigEntry,,not-accessible,ifIndex,deprecated,,A set of configuration parameters for a particular serial interface on this device. If the device has no serial interfaces, this table is empty. The index is composed of the ifIndex assigned to this serial line interface.
.1.3.6.1.2.1.16.19.10.1.1,RMON2-MIB::serialMode,INTEGER,read-create,,deprecated,direct(1):modem(2),The type of incoming connection to be expected on this serial interface.
.1.3.6.1.2.1.16.19.10.1.2,RMON2-MIB::serialProtocol,INTEGER,read-create,,deprecated,other(1):slip(2):ppp(3),The type of data link encapsulation to be used on this serial interface.
.1.3.6.1.2.1.16.19.10.1.3,RMON2-MIB::serialTimeout,Integer32,read-create,,deprecated,,This timeout value is used when the Management Station has initiated the conversation over the serial link. This variable represents the number of seconds of inactivity allowed before terminating the connection on this serial interface. Use the serialDialoutTimeout in the case where the probe has initiated the connection for the purpose of sending a trap.
.1.3.6.1.2.1.16.19.10.1.4,RMON2-MIB::serialModemInitString,OCTET,read-create,,deprecated,,A control string that controls how a modem attached to this serial interface should be initialized. The initialization is performed once during startup and again after each connection is terminated if the associated serialMode has the value of modem(2). A control string that is appropriate for a wide variety of modems is: '^s^MATE0Q0V1X4 S0=1 S2=43^M'.
.1.3.6.1.2.1.16.19.10.1.5,RMON2-MIB::serialModemHangUpString,OCTET,read-create,,deprecated,,A control string that specifies how to disconnect a modem connection on this serial interface. This object is only meaningful if the associated serialMode has the value of modem(2). A control string that is appropriate for a wide variety of modems is: '^d2^s+++^d2^sATH0^M^d2'.
.1.3.6.1.2.1.16.19.10.1.6,RMON2-MIB::serialModemConnectResp,OCTET,read-create,,deprecated,,An ASCII string containing substrings that describe the expected modem connection response code and associated bps rate. The substrings are delimited by the first character in the string, for example: /CONNECT/300/CONNECT 1200/1200/CONNECT 2400/2400/ CONNECT 4800/4800/CONNECT 9600/9600 will be interpreted as: response code bps rate CONNECT 300 CONNECT 1200 1200 CONNECT 2400 2400 CONNECT 4800 4800 CONNECT 9600 9600 The agent will use the information in this string to adjust the bps rate of this serial interface once a modem connection is established. A value that is appropriate for a wide variety of modems is: '/CONNECT/300/CONNECT 1200/1200/CONNECT 2400/2400/ CONNECT 4800/4800/CONNECT 9600/9600/CONNECT 14400/14400/ CONNECT 19200/19200/CONNECT 38400/38400/'.
.1.3.6.1.2.1.16.19.10.1.7,RMON2-MIB::serialModemNoConnectResp,OCTET,read-create,,deprecated,,An ASCII string containing response codes that may be generated by a modem to report the reason why a connection attempt has failed. The response codes are delimited by the first character in the string, for example: /NO CARRIER/BUSY/NO DIALTONE/NO ANSWER/ERROR/ If one of these response codes is received via this serial interface while attempting to make a modem connection, the agent will issue the hang up command as specified by serialModemHangUpString. A value that is appropriate for a wide variety of modems is: '/NO CARRIER/BUSY/NO DIALTONE/NO ANSWER/ERROR/'.
.1.3.6.1.2.1.16.19.10.1.8,RMON2-MIB::serialDialoutTimeout,Integer32,read-create,,deprecated,,This timeout value is used when the probe initiates the serial connection with the intention of contacting a management station. This variable represents the number of seconds of inactivity allowed before terminating the connection on this serial interface.
.1.3.6.1.2.1.16.19.10.1.9,RMON2-MIB::serialStatus,INTEGER,read-create,,deprecated,active(1):notInService(2):notReady(3):createAndGo(4):createAndWait(5):destroy(6),The status of this serialConfigEntry. An entry may not exist in the active state unless all objects in the entry have an appropriate value.
.1.3.6.1.2.1.16.19.11,RMON2-MIB::netConfigTable,,not-accessible,,deprecated,,A table of netConfigEntries. This table has been deprecated, as it has not had enough independent implementations to demonstrate interoperability to meet the requirements of a Draft Standard.
.1.3.6.1.2.1.16.19.11.1,RMON2-MIB::netConfigEntry,,not-accessible,ifIndex,deprecated,,A set of configuration parameters for a particular network interface on this device. If the device has no network interface, this table is empty. The index is composed of the ifIndex assigned to the corresponding interface.
.1.3.6.1.2.1.16.19.11.1.1,RMON2-MIB::netConfigIPAddress,IpAddress,read-create,,deprecated,,The IP address of this Net interface. The default value for this object is 0.0.0.0. If either the netConfigIPAddress or netConfigSubnetMask is 0.0.0.0, then when the device boots, it may use BOOTP to try to figure out what these values should be. If BOOTP fails before the device can talk on the network, this value must be configured (e.g., through a terminal attached to the device). If BOOTP is used, care should be taken to not send BOOTP broadcasts too frequently and to eventually send them very infrequently if no replies are received.
.1.3.6.1.2.1.16.19.11.1.2,RMON2-MIB::netConfigSubnetMask,IpAddress,read-create,,deprecated,,The subnet mask of this Net interface. The default value for this object is 0.0.0.0. If either the netConfigIPAddress or netConfigSubnetMask is 0.0.0.0, then when the device boots, it may use BOOTP to try to figure out what these values should be. If BOOTP fails before the device can talk on the network, this value must be configured (e.g., through a terminal attached to the device). If BOOTP is used, care should be taken to not send BOOTP broadcasts too frequently and to eventually send them very infrequently if no replies are received.
.1.3.6.1.2.1.16.19.11.1.3,RMON2-MIB::netConfigStatus,INTEGER,read-create,,deprecated,active(1):notInService(2):notReady(3):createAndGo(4):createAndWait(5):destroy(6),The status of this netConfigEntry. An entry may not exist in the active state unless all objects in the entry have an appropriate value.
.1.3.6.1.2.1.16.19.12,RMON2-MIB::netDefaultGateway,IpAddress,read-write,,deprecated,,The IP Address of the default gateway. If this value is undefined or unknown, it shall have the value 0.0.0.0.
.1.3.6.1.2.1.16.19.13,RMON2-MIB::trapDestTable,,not-accessible,,deprecated,,A list of trap destination entries.
.1.3.6.1.2.1.16.19.13.1,RMON2-MIB::trapDestEntry,,not-accessible,trapDestIndex,deprecated,,This entry includes a destination IP address to which traps are sent for this community.
.1.3.6.1.2.1.16.19.13.1.1,RMON2-MIB::trapDestIndex,Integer32,not-accessible,,deprecated,,A value that uniquely identifies this trapDestEntry.
.1.3.6.1.2.1.16.19.13.1.2,RMON2-MIB::trapDestCommunity,OCTET,read-create,,deprecated,,A community to which this destination address belongs. This entry is associated with any eventEntries in the RMON MIB whose value of eventCommunity is equal to the value of this object. Every time an associated event entry sends a trap due to an event, that trap will be sent to each address in the trapDestTable with a trapDestCommunity equal to eventCommunity, as long as no access control mechanism precludes it (e.g., VACM). This object may not be modified if the associated trapDestStatus object is equal to active(1).
.1.3.6.1.2.1.16.19.13.1.3,RMON2-MIB::trapDestProtocol,INTEGER,read-create,,deprecated,ip(1):ipx(2),The protocol with which this trap is to be sent.
.1.3.6.1.2.1.16.19.13.1.4,RMON2-MIB::trapDestAddress,OCTET,read-create,,deprecated,,The destination address for traps on behalf of this entry. If the associated trapDestProtocol object is equal to ip(1), the encoding of this object is the same as the snmpUDPAddress textual convention in RFC 3417, 'Transport Mappings for the Simple Network Management Protocol (SNMP)' [RFC3417]: -- for a SnmpUDPAddress of length 6: -- -- octets contents encoding -- 1-4 IP-address network-byte order -- 5-6 UDP-port network-byte order If the associated trapDestProtocol object is equal to ipx(2), the encoding of this object is the same as the snmpIPXAddress textual convention in RFC 3417, 'Transport Mappings for the Simple Network Management Protocol (SNMP)' [RFC3417]: -- for a SnmpIPXAddress of length 12: -- -- octets contents encoding -- 1-4 network-number network-byte order -- 5-10 physical-address network-byte order -- 11-12 socket-number network-byte order This object may not be modified if the associated trapDestStatus object is equal to active(1).
.1.3.6.1.2.1.16.19.13.1.5,RMON2-MIB::trapDestOwner,OCTET,read-create,,deprecated,,The entity that configured this entry and is therefore using the resources assigned to it.
.1.3.6.1.2.1.16.19.13.1.6,RMON2-MIB::trapDestStatus,INTEGER,read-create,,deprecated,active(1):notInService(2):notReady(3):createAndGo(4):createAndWait(5):destroy(6),The status of this trap destination entry. An entry may not exist in the active state unless all objects in the entry have an appropriate value.
.1.3.6.1.2.1.16.19.14,RMON2-MIB::serialConnectionTable,,not-accessible,,deprecated,,A list of serialConnectionEntries. This table has been deprecated, as it has not had enough independent implementations to demonstrate interoperability to meet the requirements of a Draft Standard.
.1.3.6.1.2.1.16.19.14.1,RMON2-MIB::serialConnectionEntry,,not-accessible,serialConnectIndex,deprecated,,Configuration for a SLIP link over a serial line.
.1.3.6.1.2.1.16.19.14.1.1,RMON2-MIB::serialConnectIndex,Integer32,not-accessible,,deprecated,,A value that uniquely identifies this serialConnection entry.
.1.3.6.1.2.1.16.19.14.1.2,RMON2-MIB::serialConnectDestIpAddress,IpAddress,read-create,,deprecated,,The IP Address that can be reached at the other end of this serial connection. This object may not be modified if the associated serialConnectStatus object is equal to active(1).
.1.3.6.1.2.1.16.19.14.1.3,RMON2-MIB::serialConnectType,INTEGER,read-create,,deprecated,direct(1):modem(2):switch(3):modemSwitch(4),The type of outgoing connection to be made. If this object has the value direct(1), then a direct serial connection is assumed. If this object has the value modem(2), then serialConnectDialString will be used to make a modem connection. If this object has the value switch(3), then serialConnectSwitchConnectSeq will be used to establish the connection over a serial data switch, and serialConnectSwitchDisconnectSeq will be used to terminate the connection. If this object has the value modem-switch(4), then a modem connection will be made first, followed by the switch connection. This object may not be modified if the associated serialConnectStatus object is equal to active(1).
.1.3.6.1.2.1.16.19.14.1.4,RMON2-MIB::serialConnectDialString,OCTET,read-create,,deprecated,,A control string that specifies how to dial the phone number in order to establish a modem connection. The string should include the dialing prefix and suffix. For example: '^s^MATD9,888-1234^M' will instruct the Probe to send a carriage return, followed by the dialing prefix 'ATD', the phone number '9,888-1234', and a carriage return as the dialing suffix. This object may not be modified if the associated serialConnectStatus object is equal to active(1).
.1.3.6.1.2.1.16.19.14.1.5,RMON2-MIB::serialConnectSwitchConnectSeq,OCTET,read-create,,deprecated,,A control string that specifies how to establish a data switch connection. This object may not be modified if the associated serialConnectStatus object is equal to active(1).
.1.3.6.1.2.1.16.19.14.1.6,RMON2-MIB::serialConnectSwitchDisconnectSeq,OCTET,read-create,,deprecated,,A control string that specifies how to terminate a data switch connection. This object may not be modified if the associated serialConnectStatus object is equal to active(1).
.1.3.6.1.2.1.16.19.14.1.7,RMON2-MIB::serialConnectSwitchResetSeq,OCTET,read-create,,deprecated,,A control string that specifies how to reset a data switch in the event of a timeout. This object may not be modified if the associated serialConnectStatus object is equal to active(1).
.1.3.6.1.2.1.16.19.14.1.8,RMON2-MIB::serialConnectOwner,OCTET,read-create,,deprecated,,The entity that configured this entry and is therefore using the resources assigned to it.
.1.3.6.1.2.1.16.19.14.1.9,RMON2-MIB::serialConnectStatus,INTEGER,read-create,,deprecated,active(1):notInService(2):notReady(3):createAndGo(4):createAndWait(5):destroy(6),The status of this serialConnectionEntry. If the manager attempts to set this object to active(1) when the serialConnectType is set to modem(2) or modem-switch(4) and the serialConnectDialString is a zero-length string or cannot be correctly parsed as a ConnectString, the set request will be rejected with badValue(3). If the manager attempts to set this object to active(1) when the serialConnectType is set to switch(3) or modem-switch(4) and the serialConnectSwitchConnectSeq, the serialConnectSwitchDisconnectSeq, or the serialConnectSwitchResetSeq is a zero-length string or cannot be correctly parsed as a ConnectString, the set request will be rejected with badValue(3). An entry may not exist in the active state unless all objects in the entry have an appropriate value.
.1.3.6.1.2.1.16.19.15,SMON-MIB::smonCapabilities,BITS,read-only,,current,smonVlanStats(0):smonPrioStats(1):dataSource(2):smonUnusedBit(3):portCopy(4),An indication of the SMON MIB groups supported by this agent.
.1.3.6.1.2.1.16.20,RMON-MIB::rmonConformance,,,,,,
.1.3.6.1.2.1.16.20.1,RMON2-MIB::rmon2MIBCompliances,,,,,,
.1.3.6.1.2.1.16.20.1.1,RMON2-MIB::rmon2MIBCompliance,,,,,,Describes the requirements for conformance to the RMON2 MIB
.1.3.6.1.2.1.16.20.1.2,RMON2-MIB::rmon2MIBApplicationLayerCompliance,,,,,,Describes the requirements for conformance to the RMON2 MIB with Application-Layer Enhancements.
.1.3.6.1.2.1.16.20.2,RMON2-MIB::rmon2MIBGroups,,,,,,
.1.3.6.1.2.1.16.20.2.1,RMON2-MIB::protocolDirectoryGroup,,,,,,Lists the inventory of protocols the probe has the capability of monitoring and allows the addition, deletion, and configuration of entries in this list.
.1.3.6.1.2.1.16.20.2.2,RMON2-MIB::protocolDistributionGroup,,,,,,Collects the relative amounts of octets and packets for the different protocols detected on a network segment.
.1.3.6.1.2.1.16.20.2.3,RMON2-MIB::addressMapGroup,,,,,,Lists MAC address to network address bindings discovered by the probe and what interface they were last seen on.
.1.3.6.1.2.1.16.20.2.4,RMON2-MIB::nlHostGroup,,,,,,Counts the amount of traffic sent from and to each network address discovered by the probe. Note that while the hlHostControlTable also has objects that control an optional alHostTable, implementation of the alHostTable is not required to fully implement this group.
.1.3.6.1.2.1.16.20.2.5,RMON2-MIB::nlMatrixGroup,,,,,,Counts the amount of traffic sent between each pair of network addresses discovered by the probe. Note that while the hlMatrixControlTable also has objects that control optional alMatrixTables, implementation of the alMatrixTables is not required to fully implement this group.
.1.3.6.1.2.1.16.20.2.6,RMON2-MIB::alHostGroup,,,,,,Counts the amount of traffic, by protocol, sent from and to each network address discovered by the probe. Implementation of this group requires implementation of the Network-Layer Host Group.
.1.3.6.1.2.1.16.20.2.7,RMON2-MIB::alMatrixGroup,,,,,,Counts the amount of traffic, by protocol, sent between each pair of network addresses discovered by the probe. Implementation of this group requires implementation of the Network-Layer Matrix Group.
.1.3.6.1.2.1.16.20.2.8,RMON2-MIB::usrHistoryGroup,,,,,,The usrHistoryGroup provides user-defined collection of historical information from MIB objects on the probe.
.1.3.6.1.2.1.16.20.2.9,RMON2-MIB::probeInformationGroup,,,,,,This group describes various operating parameters of the probe and controls the local time of the probe.
.1.3.6.1.2.1.16.20.2.10,RMON2-MIB::probeConfigurationGroup,,,,,,This group controls the configuration of various operating parameters of the probe. This group is not referenced by any MODULE-COMPLIANCE macro because it is 'grandfathered' from more recent MIB review rules that would require it.
.1.3.6.1.2.1.16.20.2.11,RMON2-MIB::rmon1EnhancementGroup,,,,,,This group adds some enhancements to RMON-1 that help management stations.
.1.3.6.1.2.1.16.20.2.12,RMON2-MIB::rmon1EthernetEnhancementGroup,,,,,,This group adds some enhancements to RMON-1 that help management stations.
.1.3.6.1.2.1.16.20.2.13,RMON2-MIB::rmon1TokenRingEnhancementGroup,,,,,,This group adds some enhancements to RMON-1 that help management stations. This group is not referenced by any MODULE-COMPLIANCE macro because it is 'grandfathered' from more recent MIB review rules that would require it.
.1.3.6.1.2.1.16.20.3,SMON-MIB::smonMIBCompliances,,,,,,
.1.3.6.1.2.1.16.20.3.1,SMON-MIB::smonMIBCompliance,,,,,,Describes the requirements for full conformance with the SMON MIB
.1.3.6.1.2.1.16.20.3.2,SMON-MIB::smonMIBVlanStatsCompliance,,,,,,Describes the requirements for conformance with the SMON MIB with support for VLAN Statistics. Mandatory for a SMON probe in environment where IEEE 802.1Q bridging is implemented.
.1.3.6.1.2.1.16.20.3.3,SMON-MIB::smonMIBPrioStatsCompliance,,,,,,Describes the requirements for conformance with the SMON MIB with support for priority level Statistics. Mandatory for a SMON probe in a environment where IEEE 802.1p priority-switching is implemented.
.1.3.6.1.2.1.16.20.3.4,SMON-MIB::portCopyCompliance,,,,,,Describes the requirements for conformance with the port copy functionality defined by the SMON MIB
.1.3.6.1.2.1.16.20.4,SMON-MIB::smonMIBGroups,,,,,,
.1.3.6.1.2.1.16.20.4.1,SMON-MIB::dataSourceCapsGroup,,,,,,Defines the objects that describe the capabilities of RMON data sources.
.1.3.6.1.2.1.16.20.4.2,SMON-MIB::smonVlanStatsGroup,,,,,,Defines the switch monitoring specific statistics - per VLAN Id on interfaces of 10MB or less.
.1.3.6.1.2.1.16.20.4.3,SMON-MIB::smonPrioStatsGroup,,,,,,Defines the switch monitoring specific statistics - per VLAN Id on interface.
.1.3.6.1.2.1.16.20.4.4,SMON-MIB::smonHcTo100mbGroup,,,,,,Defines the additional high capacity statistics needed to be kept on interfaces with ifSpeed greater than 10MB/sec and less than or equal to 100MB/sec.
.1.3.6.1.2.1.16.20.4.5,SMON-MIB::smonHc100mbPlusGroup,,,,,,Defines the additional high capacity statistics needed to be kept on interfaces with ifSpeed of more than 100MB/sec. These statistics MUST also be kept on smonDataSources of type VLAN or entPhysicalEntry.
.1.3.6.1.2.1.16.20.4.6,SMON-MIB::hcVlanTo100mbGroup,,,,,,Defines the additional high capacity VLAN statistics needed to be kept on interfaces with ifSpeed greater than 10MB/sec and less than or equal to 100MB/sec.
.1.3.6.1.2.1.16.20.4.7,SMON-MIB::hcVlan100mbPlusGroup,,,,,,Defines the additional high capacity VLAN statistics needed to be kept on interfaces with ifSpeed of more than 100MB/sec. These statistics MUST also be kept on smonDataSources of type VLAN or entPhysicalEntry.
.1.3.6.1.2.1.16.20.4.8,SMON-MIB::hcPrioTo100mbGroup,,,,,,Defines the additional high capacity VLAN priority statistics needed to be kept on interfaces with ifSpeed of greater than 10MB/sec and less than or equal to 100MB/sec.
.1.3.6.1.2.1.16.20.4.9,SMON-MIB::hcPrio100mbPlusGroup,,,,,,Defines the additional high capacity VLAN priority statistics needed to be kept on interfaces with ifSpeed of greater than 100MB/sec. These statistics MUST also be kept on smonDataSources of type VLAN or entPhysicalEntry.
.1.3.6.1.2.1.16.20.4.10,SMON-MIB::smonVlanStatsExtGroup,,,,,,Defines the switch monitoring specific statistics for systems capable of counting non-unicast octets for a given dataSource (as described in the dataSourceRmonCaps object).
.1.3.6.1.2.1.16.20.4.11,SMON-MIB::smonInformationGroup,,,,,,An indication of the SMON capabilities supported by this agent.
.1.3.6.1.2.1.16.20.4.12,SMON-MIB::portCopyConfigGroup,,,,,,Defines the control objects for copy port operations.
.1.3.6.1.2.1.16.20.8,RMON-MIB::rmonMibModule,,,,,,Remote network monitoring devices, often called monitors or probes, are instruments that exist for the purpose of managing a network. This MIB defines objects for managing remote network monitoring devices.
.1.3.6.1.2.1.16.20.9,RMON-MIB::rmonCompliances,,,,,,
.1.3.6.1.2.1.16.20.9.1,RMON-MIB::rmonCompliance,,,,,,The requirements for conformance to the RMON MIB. At least one of the groups in this module must be implemented to conform to the RMON MIB. Implementations of this MIB must also implement the system group of MIB-II [16] and the IF-MIB [17].
.1.3.6.1.2.1.16.20.10,RMON-MIB::rmonGroups,,,,,,
.1.3.6.1.2.1.16.20.10.1,RMON-MIB::rmonEtherStatsGroup,,,,,,The RMON Ethernet Statistics Group.
.1.3.6.1.2.1.16.20.10.2,RMON-MIB::rmonHistoryControlGroup,,,,,,The RMON History Control Group.
.1.3.6.1.2.1.16.20.10.3,RMON-MIB::rmonEthernetHistoryGroup,,,,,,The RMON Ethernet History Group.
.1.3.6.1.2.1.16.20.10.4,RMON-MIB::rmonAlarmGroup,,,,,,The RMON Alarm Group.
.1.3.6.1.2.1.16.20.10.5,RMON-MIB::rmonHostGroup,,,,,,The RMON Host Group.
.1.3.6.1.2.1.16.20.10.6,RMON-MIB::rmonHostTopNGroup,,,,,,The RMON Host Top 'N' Group.
.1.3.6.1.2.1.16.20.10.7,RMON-MIB::rmonMatrixGroup,,,,,,The RMON Matrix Group.
.1.3.6.1.2.1.16.20.10.8,RMON-MIB::rmonFilterGroup,,,,,,The RMON Filter Group.
.1.3.6.1.2.1.16.20.10.9,RMON-MIB::rmonPacketCaptureGroup,,,,,,The RMON Packet Capture Group.
.1.3.6.1.2.1.16.20.10.10,RMON-MIB::rmonEventGroup,,,,,,The RMON Event Group.
.1.3.6.1.2.1.16.20.10.11,RMON-MIB::rmonNotificationGroup,,,,,,The RMON Notification Group.
.1.3.6.1.2.1.16.22,SMON-MIB::switchRMON,,,,,,The MIB module for managing remote monitoring device implementations for Switched Networks
.1.3.6.1.2.1.16.22.1,SMON-MIB::smonMIBObjects,,,,,,
.1.3.6.1.2.1.16.22.1.1,SMON-MIB::dataSourceCaps,,,,,,
.1.3.6.1.2.1.16.22.1.1.1,SMON-MIB::dataSourceCapsTable,,not-accessible,,current,,This table describes RMON data sources and port copy capabilities. An NMS MAY use this table to discover the identity and attributes of the data sources on a given agent implementation. Similar to the probeCapabilities object, actual row-creation operations will succeed or fail based on the resources available and parameter values used in each row-creation operation. Upon restart of the RMON agent, the dataSourceTable, ifTable, and perhaps entPhysicalTable are initialized for the available dataSources. For each dataSourceCapsEntry representing a VLAN or entPhysicalEntry the agent MUST create an associated ifEntry with a ifType value of 'propVirtual(53)'. This ifEntry will be used as the actual value in RMON control table dataSource objects. The assigned ifIndex value is copied into the associated dataSourceCapsIfIndex object. It is understood that dataSources representing VLANs may not always be instantiated immediately upon restart, but rather as VLAN usage is detected by the agent. The agent SHOULD attempt to create dataSource and interface entries for all dataSources as soon as possible.
.1.3.6.1.2.1.16.22.1.1.1.1,SMON-MIB::dataSourceCapsEntry,,not-accessible,IMPLIEDdataSourceCapsObject,current,,Entries per data source containing descriptions of data source and port copy capabilities. This table is populated by the SMON agent with one entry for each supported data source.
.1.3.6.1.2.1.16.22.1.1.1.1.1,SMON-MIB::dataSourceCapsObject,OBJECT,not-accessible,,current,,Defines an object that can be a SMON data source or a source or a destination for a port copy operation.
.1.3.6.1.2.1.16.22.1.1.1.1.2,SMON-MIB::dataSourceRmonCaps,BITS,read-only,,current,countErrFrames(0):countAllGoodFrames(1):countAnyRmonTables(2):babyGiantsCountAsGood(3), General attributes of the specified dataSource. Note that these are static attributes, which SHOULD NOT be adjusted because of current resources or configuration. The agent sets this bit for the dataSource if errored frames received on this dataSource can actually be monitored by the agent The agent clears this bit if any errored frames are not visible to the RMON data collector. The agent sets this bit for the dataSource if all good frames received on this dataSource can actually be monitored by the agent. The agent clears this bit if any good frames are not visible for RMON collection, e.g., the dataSource is a non-promiscuous interface or an internal switch interface which may not receive frames which were switched in hardware or dropped by the bridge forwarding function. The agent sets this bit if this dataSource can actually be used in any of the implemented RMON tables, resources notwithstanding. The agent clears this bit if this dataSourceCapsEntry is present simply to identify a dataSource that may only be used as portCopySource and/or a portCopyDest, but not the source of an actual RMON data collection. The agent sets this bit if it can distinguish, for counting purposes, between true giant frames and frames that exceed Ethernet maximum frame size 1518 due to VLAN tagging ('baby giants'). Specifically, this BIT means that frames up to 1522 octets are counted as good. Agents not capable of detecting 'baby giants' will clear this bit and will view all frames less than or equal to 1518 octets as 'good frames' and all frames larger than 1518 octets as 'bad frames' for the purpose of counting in the smonVlanIdStats and smonPrioStats tables. Agents capable of detecting 'baby giants' SHALL consider them as 'good frames' for the purpose of counting in the smonVlanIdStats and smonPrioStats tables.
.1.3.6.1.2.1.16.22.1.1.1.1.3,SMON-MIB::dataSourceCopyCaps,BITS,read-only,,current,copySourcePort(0):copyDestPort(1):copySrcTxTraffic(2):copySrcRxTraffic(3):countDestDropEvents(4):copyErrFrames(5):copyUnalteredFrames(6):copyAllGoodFrames(7),PortCopy function capabilities of the specified dataSource. The agent sets this bit if this dataSource is capable of acting as a source of a portCopy operation. The agent clears this bit otherwise. The agent sets this bit if this dataSource is capable of acting as a destination of a portCopy operation. The agent clears this bit otherwise. If the copySourcePort bit is set: The agent sets this bit if this dataSource is capable of copying frames transmitted out this portCopy source. The agent clears this bit otherwise. This function is needed to support full-duplex ports. Else: this bit SHOULD be cleared. If the copySourcePort bit is set: The agent sets this bit if this dataSource is capable of copying frames received on this portCopy source. The agent clears this bit otherwise. This function is needed to support full-duplex ports. Else: this bit SHOULD be cleared. If the copyDestPort bit is set: The agent sets this bit if it is capable of incrementing portCopyDestDropEvents, when this dataSource is the target of a portCopy operation and a frame destined to this dataSource is dropped (for RMON counting purposes). Else: this BIT SHOULD be cleared. If the copySourcePort bit is set: The agent sets this bit if it is capable of copying all errored frames from this portCopy source-port, for errored frames received on this dataSource. Else: this BIT SHOULD be cleared. If the copySourcePort bit is set: The agent sets the copyUnalteredFrames bit If it is capable of copying all frames from this portCopy source-port without alteration in any way; Else: this bit SHOULD be cleared. If the copySourcePort bit is set: The agent sets this bit for the dataSource if all good frames received on this dataSource are normally capable of being copied by the agent. The agent clears this bit if any good frames are not visible for the RMON portCopy operation, e.g., the dataSource is a non-promiscuous interface or an internal switch interface which may not receive frames which were switched in hardware or dropped by the bridge forwarding function. Else: this bit SHOULD be cleared.
.1.3.6.1.2.1.16.22.1.1.1.1.4,SMON-MIB::dataSourceCapsIfIndex,Integer32,read-only,,current,,This object contains the ifIndex value of the ifEntry associated with this smonDataSource. The agent MUST create 'propVirtual' ifEntries for each dataSourceCapsEntry of type VLAN or entPhysicalEntry.
.1.3.6.1.2.1.16.22.1.2,SMON-MIB::smonStats,,,,,,
.1.3.6.1.2.1.16.22.1.2.1,SMON-MIB::smonVlanStatsControlTable,,not-accessible,,current,,Controls the setup of VLAN statistics tables. The statistics collected represent a distribution based on the IEEE 802.1Q VLAN-ID (VID), for each good frame attributed to the data source for the collection.
.1.3.6.1.2.1.16.22.1.2.1.1,SMON-MIB::smonVlanStatsControlEntry,,not-accessible,smonVlanStatsControlIndex,current,,A conceptual row in the smonVlanStatsControlTable.
.1.3.6.1.2.1.16.22.1.2.1.1.1,SMON-MIB::smonVlanStatsControlIndex,Integer32,not-accessible,,current,,A unique arbitrary index for this smonVlanStatsControlEntry.
.1.3.6.1.2.1.16.22.1.2.1.1.2,SMON-MIB::smonVlanStatsControlDataSource,OBJECT,read-create,,current,,The source of data for this set of VLAN statistics. This object MAY NOT be modified if the associated smonVlanStatsControlStatus object is equal to active(1).
.1.3.6.1.2.1.16.22.1.2.1.1.3,SMON-MIB::smonVlanStatsControlCreateTime,TimeTicks,read-only,,current,,The value of sysUpTime when this control entry was last activated. This object allows to a management station to detect deletion and recreation cycles between polls.
.1.3.6.1.2.1.16.22.1.2.1.1.4,SMON-MIB::smonVlanStatsControlOwner,OCTET,read-create,,current,,Administratively assigned named of the owner of this entry. It usually defines the entity that created this entry and is therefore using the resources assigned to it, though there is no enforcement mechanism, nor assurance that rows created are ever used.
.1.3.6.1.2.1.16.22.1.2.1.1.5,SMON-MIB::smonVlanStatsControlStatus,INTEGER,read-create,,current,active(1):notInService(2):notReady(3):createAndGo(4):createAndWait(5):destroy(6),The status of this row. An entry MAY NOT exist in the active state unless all objects in the entry have an appropriate value. If this object is not equal to active(1), all associated entries in the smonVlanIdStatsTable SHALL be deleted.
.1.3.6.1.2.1.16.22.1.2.2,SMON-MIB::smonVlanIdStatsTable,,not-accessible,,current,,Contains the VLAN statistics data. The statistics collected represent a distribution based on the IEEE 802.1Q VLAN-ID (VID), for each good frame attributed to the data source for the collection. This function applies the same rules for attributing frames to VLAN-based collections. RMON VLAN statistics are collected after the Ingress Rules defined in section 3.13 of the VLAN Specification [20] are applied. It is possible that entries in this table will be garbage-collected, based on agent resources, and VLAN configuration. Agents are encouraged to support all 4094 index values and not garbage collect this table.
.1.3.6.1.2.1.16.22.1.2.2.1,SMON-MIB::smonVlanIdStatsEntry,,not-accessible,smonVlanStatsControlIndex:smonVlanIdStatsId,current,,A conceptual row in smonVlanIdStatsTable.
.1.3.6.1.2.1.16.22.1.2.2.1.1,SMON-MIB::smonVlanIdStatsId,Integer32,not-accessible,,current,,The unique identifier of the VLAN monitored for this specific statistics collection. Tagged packets match the VID for the range between 1 and 4094. An external RMON probe MAY detect VID=0 on an Inter Switch Link, in which case the packet belongs to a VLAN determined by the PVID of the ingress port. The VLAN to which such a packet belongs can be determined only by a RMON probe internal to the switch.
.1.3.6.1.2.1.16.22.1.2.2.1.2,SMON-MIB::smonVlanIdStatsTotalPkts,Counter32,read-only,,current,,The total number of packets counted on this VLAN.
.1.3.6.1.2.1.16.22.1.2.2.1.3,SMON-MIB::smonVlanIdStatsTotalOverflowPkts,Counter32,read-only,,current,,The number of times the associated smonVlanIdStatsTotalPkts counter has overflowed.
.1.3.6.1.2.1.16.22.1.2.2.1.4,SMON-MIB::smonVlanIdStatsTotalHCPkts,Counter64,read-only,,current,,The total number of packets counted on this VLAN.
.1.3.6.1.2.1.16.22.1.2.2.1.5,SMON-MIB::smonVlanIdStatsTotalOctets,Counter32,read-only,,current,,The total number of octets counted on this VLAN.
.1.3.6.1.2.1.16.22.1.2.2.1.6,SMON-MIB::smonVlanIdStatsTotalOverflowOctets,Counter32,read-only,,current,,The number of times the associated smonVlanIdStatsTotalOctets counter has overflowed.
.1.3.6.1.2.1.16.22.1.2.2.1.7,SMON-MIB::smonVlanIdStatsTotalHCOctets,Counter64,read-only,,current,,The total number of octets counted on this VLAN.
.1.3.6.1.2.1.16.22.1.2.2.1.8,SMON-MIB::smonVlanIdStatsNUcastPkts,Counter32,read-only,,current,,The total number of non-unicast packets counted on this VLAN.
.1.3.6.1.2.1.16.22.1.2.2.1.9,SMON-MIB::smonVlanIdStatsNUcastOverflowPkts,Counter32,read-only,,current,,The number of times the associated smonVlanIdStatsNUcastPkts counter has overflowed.
.1.3.6.1.2.1.16.22.1.2.2.1.10,SMON-MIB::smonVlanIdStatsNUcastHCPkts,Counter64,read-only,,current,,The total number of non-unicast packets counted on this VLAN.
.1.3.6.1.2.1.16.22.1.2.2.1.11,SMON-MIB::smonVlanIdStatsNUcastOctets,Counter32,read-only,,current,,The total number of non-unicast octets counted on this VLAN.
.1.3.6.1.2.1.16.22.1.2.2.1.12,SMON-MIB::smonVlanIdStatsNUcastOverflowOctets,Counter32,read-only,,current,,The number of times the associated smonVlanIdStatsNUcastOctets counter has overflowed.
.1.3.6.1.2.1.16.22.1.2.2.1.13,SMON-MIB::smonVlanIdStatsNUcastHCOctets,Counter64,read-only,,current,,The total number of Non-unicast octets counted on this VLAN.
.1.3.6.1.2.1.16.22.1.2.2.1.14,SMON-MIB::smonVlanIdStatsCreateTime,TimeTicks,read-only,,current,,The value of sysUpTime when this entry was last activated. This object allows to a management station to detect deletion and recreation cycles between polls.
.1.3.6.1.2.1.16.22.1.2.3,SMON-MIB::smonPrioStatsControlTable,,not-accessible,,current,,Controls the setup of priority statistics tables. The smonPrioStatsControlTable allows configuration of collections based on the value of the 3-bit user priority field encoded in the Tag Control Information (TCI) field according to [19],[20]. Note that this table merely reports priority as encoded in the VLAN headers, not the priority (if any) given to the frame for the actual switching purposes.
.1.3.6.1.2.1.16.22.1.2.3.1,SMON-MIB::smonPrioStatsControlEntry,,not-accessible,smonPrioStatsControlIndex,current,,A conceptual row in the smonPrioStatsControlTable.
.1.3.6.1.2.1.16.22.1.2.3.1.1,SMON-MIB::smonPrioStatsControlIndex,Integer32,not-accessible,,current,,A unique arbitrary index for this smonPrioStatsControlEntry.
.1.3.6.1.2.1.16.22.1.2.3.1.2,SMON-MIB::smonPrioStatsControlDataSource,OBJECT,read-create,,current,,The source of data for this set of VLAN statistics. This object MAY NOT be modified if the associated smonPrioStatsControlStatus object is equal to active(1).
.1.3.6.1.2.1.16.22.1.2.3.1.3,SMON-MIB::smonPrioStatsControlCreateTime,TimeTicks,read-only,,current,,The value of sysUpTime when this entry was created. This object allows to a management station to detect deletion and recreation cycles between polls.
.1.3.6.1.2.1.16.22.1.2.3.1.4,SMON-MIB::smonPrioStatsControlOwner,OCTET,read-create,,current,,Administratively assigned named of the owner of this entry. It usually defines the entity that created this entry and is therefore using the resources assigned to it, though there is no enforcement mechanism, nor assurance that rows created are ever used.
.1.3.6.1.2.1.16.22.1.2.3.1.5,SMON-MIB::smonPrioStatsControlStatus,INTEGER,read-create,,current,active(1):notInService(2):notReady(3):createAndGo(4):createAndWait(5):destroy(6),The status of this row. An entry MAY NOT exist in the active state unless all objects in the entry have an appropriate value. If this object is not equal to active(1), all associated entries in the smonPrioStatsTable SHALL be deleted.
.1.3.6.1.2.1.16.22.1.2.4,SMON-MIB::smonPrioStatsTable,,not-accessible,,current,,Contains the priority statistics. The collections are based on the value of the 3-bit user priority field encoded in the Tag Control Information (TCI) field according to [19], [20]. Note that this table merely reports priority as encoded in the VLAN headers, not the priority (if any) given to the frame for the actual switching purposes. No garbage collection is designed for this table, as there always are at most eight rows per statistical set, and the low memory requirements do not justify the implementation of such a mechanism.
.1.3.6.1.2.1.16.22.1.2.4.1,SMON-MIB::smonPrioStatsEntry,,not-accessible,smonPrioStatsControlIndex:smonPrioStatsId,current,,A conceptual row in smonPrioStatsTable.
.1.3.6.1.2.1.16.22.1.2.4.1.1,SMON-MIB::smonPrioStatsId,Integer32,not-accessible,,current,,The unique identifier of the priority level monitored for this specific statistics collection.
.1.3.6.1.2.1.16.22.1.2.4.1.2,SMON-MIB::smonPrioStatsPkts,Counter32,read-only,,current,,The total number of packets counted on this priority level.
.1.3.6.1.2.1.16.22.1.2.4.1.3,SMON-MIB::smonPrioStatsOverflowPkts,Counter32,read-only,,current,,The number of times the associated smonPrioStatsPkts counter has overflowed.
.1.3.6.1.2.1.16.22.1.2.4.1.4,SMON-MIB::smonPrioStatsHCPkts,Counter64,read-only,,current,,The total number of packets counted on this priority level.
.1.3.6.1.2.1.16.22.1.2.4.1.5,SMON-MIB::smonPrioStatsOctets,Counter32,read-only,,current,,The total number of octets counted on this priority level.
.1.3.6.1.2.1.16.22.1.2.4.1.6,SMON-MIB::smonPrioStatsOverflowOctets,Counter32,read-only,,current,,The number of times the associated smonPrioStatsOctets counter has overflowed.
.1.3.6.1.2.1.16.22.1.2.4.1.7,SMON-MIB::smonPrioStatsHCOctets,Counter64,read-only,,current,,The total number of octets counted on this priority level.
.1.3.6.1.2.1.16.22.1.3,SMON-MIB::portCopyConfig,,,,,,
.1.3.6.1.2.1.16.22.1.3.1,SMON-MIB::portCopyTable,,not-accessible,,current,, Port Copy provides the ability to copy all frames from a specified source to specified destination within a switch. Source and destinations MUST be ifEntries, as defined by [22]. One to one, one to many, many to one and many to many source to destination relationships may be configured. Applicable counters on the destination will increment for all packets transiting the port, be it by normal bridging/switching or due to packet copy. Note that this table manages no RMON data collection by itself, and an agent may possibly implement no RMON objects except objects related to the port copy operation defined by the portCopyCompliance conformance macro. That allows for a switch with no other embedded RMON capability to perform port copy operations to a destination port at which a different external RMON probe is connected. One to one, many to one and one to many source to destination relationships may be configured. Each row that exists in this table defines such a relationship. By disabling a row in this table the port copy relationship no longer exists. The number of entries and the types of port copies (1-1, many-1, 1-many) are implementation specific and could possibly be dynamic due to changing resource availability. In order to configure a source to destination portCopy relationship, both source and destination interfaces MUST be present as an ifEntry in the ifTable and their respective ifAdminStatus and ifOperStatus values MUST be equal to 'up(1)'. If the value of any of those two objects changes after the portCopyEntry is activated, portCopyStatus will transition to 'notReady(3)'. The capability of an interface to be source or destination of a port copy operation is described by the 'copySourcePort(0)' and 'copyDestPort(1)' bits in dataSourceCopyCaps. Those bits SHOULD be appropriately set by the agent, in order to allow for a portCopyEntry to be created. Applicable counters on the destination will increment for all packets transmitted, be it by normal bridging/switching or due to packet copy.
.1.3.6.1.2.1.16.22.1.3.1.1,SMON-MIB::portCopyEntry,,not-accessible,portCopySource:portCopyDest,current,,Describes a particular port copy entry.
.1.3.6.1.2.1.16.22.1.3.1.1.1,SMON-MIB::portCopySource,Integer32,not-accessible,,current,,The ifIndex of the source which will have all packets redirected to the destination as defined by portCopyDest.
.1.3.6.1.2.1.16.22.1.3.1.1.2,SMON-MIB::portCopyDest,Integer32,not-accessible,,current,,Defines the ifIndex destination for the copy operation.
.1.3.6.1.2.1.16.22.1.3.1.1.3,SMON-MIB::portCopyDestDropEvents,Counter32,read-only,,current,,The total number of events in which port copy packets were dropped by the switch at the destination port due to lack of resources. Note that this number is not necessarily the number of packets dropped; it is just the number of times this condition has been detected. A single dropped event counter is maintained for each portCopyDest. Thus all instances associated with a given portCopyDest will have the same portCopyDestDropEvents value.
.1.3.6.1.2.1.16.22.1.3.1.1.4,SMON-MIB::portCopyDirection,INTEGER,read-create,,current,copyRxOnly(1):copyTxOnly(2):copyBoth(3),This object affects the way traffic is copied from a switch source port, for the indicated port copy operation. If this object has the value 'copyRxOnly(1)', then only traffic received on the indicated source port will be copied to the indicated destination port. If this object has the value 'copyTxOnly(2)', then only traffic transmitted out the indicated source port will be copied to the indicated destination port. If this object has the value 'copyBoth(3)', then all traffic received or transmitted on the indicated source port will be copied to the indicated destination port. The creation and deletion of instances of this object is controlled by the portCopyRowStatus object. Note that there is no guarantee that changes in the value of this object performed while the associated portCopyRowStatus object is equal to active will not cause traffic discontinuities in the packet stream.
.1.3.6.1.2.1.16.22.1.3.1.1.5,SMON-MIB::portCopyStatus,INTEGER,read-create,,current,active(1):notInService(2):notReady(3):createAndGo(4):createAndWait(5):destroy(6),Defines the status of the port copy entry. In order to configure a source to destination portCopy relationship, both source and destination interfaces MUST be present as an ifEntry in the ifTable and their respective ifAdminStatus and ifOperStatus values MUST be equal to 'up(1)'. If the value of any of those two objects changes after the portCopyEntry is activated, portCopyStatus will transition to 'notReady(3)'. The capability of an interface to be source or destination of a port copy operation is described by the 'copySourcePort(0)' and 'copyDestPort(1)' bits in dataSourceCopyCaps. Those bits SHOULD be appropriately set by the agent, in order to allow for a portCopyEntry to be created.
.1.3.6.1.2.1.16.22.1.4,SMON-MIB::smonRegistrationPoints,,,,,,
.1.3.6.1.2.1.16.22.1.4.1,SMON-MIB::smonVlanDataSource,,,,,,
.1.3.6.1.2.1.17,BRIDGE-MIB::dot1dBridge,,,,,,The Bridge MIB module for managing devices that support IEEE 802.1D. Copyright (C) The Internet Society (2005). This version of this MIB module is part of RFC 4188; see the RFC itself for full legal notices.
.1.3.6.1.2.1.17.0,BRIDGE-MIB::dot1dNotifications,,,,,,
.1.3.6.1.2.1.17.0.1,BRIDGE-MIB::newRoot,,,,,,The newRoot trap indicates that the sending agent has become the new root of the Spanning Tree; the trap is sent by a bridge soon after its election as the new root, e.g., upon expiration of the Topology Change Timer, immediately subsequent to its election. Implementation of this trap is optional.
.1.3.6.1.2.1.17.0.2,BRIDGE-MIB::topologyChange,,,,,,A topologyChange trap is sent by a bridge when any of its configured ports transitions from the Learning state to the Forwarding state, or from the Forwarding state to the Blocking state. The trap is not sent if a newRoot trap is sent for the same transition. Implementation of this trap is optional.
.1.3.6.1.2.1.17.1,BRIDGE-MIB::dot1dBase,,,,,,
.1.3.6.1.2.1.17.1.1,BRIDGE-MIB::dot1dBaseBridgeAddress,OCTET,read-only,,current,,The MAC address used by this bridge when it must be referred to in a unique fashion. It is recommended that this be the numerically smallest MAC address of all ports that belong to this bridge. However, it is only required to be unique. When concatenated with dot1dStpPriority, a unique BridgeIdentifier is formed, which is used in the Spanning Tree Protocol.
.1.3.6.1.2.1.17.1.2,BRIDGE-MIB::dot1dBaseNumPorts,Integer32,read-only,,current,,The number of ports controlled by this bridging entity.
.1.3.6.1.2.1.17.1.3,BRIDGE-MIB::dot1dBaseType,INTEGER,read-only,,current,unknown(1):transparent-only(2):sourceroute-only(3):srt(4),Indicates what type of bridging this bridge can perform. If a bridge is actually performing a certain type of bridging, this will be indicated by entries in the port table for the given type.
.1.3.6.1.2.1.17.1.4,BRIDGE-MIB::dot1dBasePortTable,,not-accessible,,current,,A table that contains generic information about every port that is associated with this bridge. Transparent, source-route, and srt ports are included.
.1.3.6.1.2.1.17.1.4.1,BRIDGE-MIB::dot1dBasePortEntry,,not-accessible,dot1dBasePort,current,,A list of information for each port of the bridge.
.1.3.6.1.2.1.17.1.4.1.1,BRIDGE-MIB::dot1dBasePort,Integer32,read-only,,current,,The port number of the port for which this entry contains bridge management information.
.1.3.6.1.2.1.17.1.4.1.2,BRIDGE-MIB::dot1dBasePortIfIndex,Integer32,read-only,,current,,The value of the instance of the ifIndex object, defined in IF-MIB, for the interface corresponding to this port.
.1.3.6.1.2.1.17.1.4.1.3,BRIDGE-MIB::dot1dBasePortCircuit,OBJECT,read-only,,current,,For a port that (potentially) has the same value of dot1dBasePortIfIndex as another port on the same bridge. This object contains the name of an object instance unique to this port. For example, in the case where multiple ports correspond one-to-one with multiple X.25 virtual circuits, this value might identify an (e.g., the first) object instance associated with the X.25 virtual circuit corresponding to this port. For a port which has a unique value of dot1dBasePortIfIndex, this object can have the value { 0 0 }.
.1.3.6.1.2.1.17.1.4.1.4,BRIDGE-MIB::dot1dBasePortDelayExceededDiscards,Counter32,read-only,,current,,The number of frames discarded by this port due to excessive transit delay through the bridge. It is incremented by both transparent and source route bridges.
.1.3.6.1.2.1.17.1.4.1.5,BRIDGE-MIB::dot1dBasePortMtuExceededDiscards,Counter32,read-only,,current,,The number of frames discarded by this port due to an excessive size. It is incremented by both transparent and source route bridges.
.1.3.6.1.2.1.17.2,BRIDGE-MIB::dot1dStp,,,,,,
.1.3.6.1.2.1.17.2.1,BRIDGE-MIB::dot1dStpProtocolSpecification,INTEGER,read-only,,current,unknown(1):decLb100(2):ieee8021d(3),An indication of what version of the Spanning Tree Protocol is being run. The value 'decLb100(2)' indicates the DEC LANbridge 100 Spanning Tree protocol. IEEE 802.1D implementations will return 'ieee8021d(3)'. If future versions of the IEEE Spanning Tree Protocol that are incompatible with the current version are released a new value will be defined.
.1.3.6.1.2.1.17.2.2,BRIDGE-MIB::dot1dStpPriority,Integer32,read-write,,current,,The value of the write-able portion of the Bridge ID (i.e., the first two octets of the (8 octet long) Bridge ID). The other (last) 6 octets of the Bridge ID are given by the value of dot1dBaseBridgeAddress. On bridges supporting IEEE 802.1t or IEEE 802.1w, permissible values are 0-61440, in steps of 4096.
.1.3.6.1.2.1.17.2.3,BRIDGE-MIB::dot1dStpTimeSinceTopologyChange,TimeTicks,read-only,,current,,The time (in hundredths of a second) since the last time a topology change was detected by the bridge entity. For RSTP, this reports the time since the tcWhile timer for any port on this Bridge was nonzero.
.1.3.6.1.2.1.17.2.4,BRIDGE-MIB::dot1dStpTopChanges,Counter32,read-only,,current,,The total number of topology changes detected by this bridge since the management entity was last reset or initialized.
.1.3.6.1.2.1.17.2.5,BRIDGE-MIB::dot1dStpDesignatedRoot,OCTET,read-only,,current,,The bridge identifier of the root of the spanning tree, as determined by the Spanning Tree Protocol, as executed by this node. This value is used as the Root Identifier parameter in all Configuration Bridge PDUs originated by this node.
.1.3.6.1.2.1.17.2.6,BRIDGE-MIB::dot1dStpRootCost,Integer32,read-only,,current,,The cost of the path to the root as seen from this bridge.
.1.3.6.1.2.1.17.2.7,BRIDGE-MIB::dot1dStpRootPort,Integer32,read-only,,current,,The port number of the port that offers the lowest cost path from this bridge to the root bridge.
.1.3.6.1.2.1.17.2.8,BRIDGE-MIB::dot1dStpMaxAge,Integer32,read-only,,current,,The maximum age of Spanning Tree Protocol information learned from the network on any port before it is discarded, in units of hundredths of a second. This is the actual value that this bridge is currently using.
.1.3.6.1.2.1.17.2.9,BRIDGE-MIB::dot1dStpHelloTime,Integer32,read-only,,current,,The amount of time between the transmission of Configuration bridge PDUs by this node on any port when it is the root of the spanning tree, or trying to become so, in units of hundredths of a second. This is the actual value that this bridge is currently using.
.1.3.6.1.2.1.17.2.10,BRIDGE-MIB::dot1dStpHoldTime,Integer32,read-only,,current,,This time value determines the interval length during which no more than two Configuration bridge PDUs shall be transmitted by this node, in units of hundredths of a second.
.1.3.6.1.2.1.17.2.11,BRIDGE-MIB::dot1dStpForwardDelay,Integer32,read-only,,current,,This time value, measured in units of hundredths of a second, controls how fast a port changes its spanning state when moving towards the Forwarding state. The value determines how long the port stays in each of the Listening and Learning states, which precede the Forwarding state. This value is also used when a topology change has been detected and is underway, to age all dynamic entries in the Forwarding Database. [Note that this value is the one that this bridge is currently using, in contrast to dot1dStpBridgeForwardDelay, which is the value that this bridge and all others would start using if/when this bridge were to become the root.]
.1.3.6.1.2.1.17.2.12,BRIDGE-MIB::dot1dStpBridgeMaxAge,Integer32,read-write,,current,,The value that all bridges use for MaxAge when this bridge is acting as the root. Note that 802.1D-1998 specifies that the range for this parameter is related to the value of dot1dStpBridgeHelloTime. The granularity of this timer is specified by 802.1D-1998 to be 1 second. An agent may return a badValue error if a set is attempted to a value that is not a whole number of seconds.
.1.3.6.1.2.1.17.2.13,BRIDGE-MIB::dot1dStpBridgeHelloTime,Integer32,read-write,,current,,The value that all bridges use for HelloTime when this bridge is acting as the root. The granularity of this timer is specified by 802.1D-1998 to be 1 second. An agent may return a badValue error if a set is attempted to a value that is not a whole number of seconds.
.1.3.6.1.2.1.17.2.14,BRIDGE-MIB::dot1dStpBridgeForwardDelay,Integer32,read-write,,current,,The value that all bridges use for ForwardDelay when this bridge is acting as the root. Note that 802.1D-1998 specifies that the range for this parameter is related to the value of dot1dStpBridgeMaxAge. The granularity of this timer is specified by 802.1D-1998 to be 1 second. An agent may return a badValue error if a set is attempted to a value that is not a whole number of seconds.
.1.3.6.1.2.1.17.2.15,BRIDGE-MIB::dot1dStpPortTable,,not-accessible,,current,,A table that contains port-specific information for the Spanning Tree Protocol.
.1.3.6.1.2.1.17.2.15.1,BRIDGE-MIB::dot1dStpPortEntry,,not-accessible,dot1dStpPort,current,,A list of information maintained by every port about the Spanning Tree Protocol state for that port.
.1.3.6.1.2.1.17.2.15.1.1,BRIDGE-MIB::dot1dStpPort,Integer32,read-only,,current,,The port number of the port for which this entry contains Spanning Tree Protocol management information.
.1.3.6.1.2.1.17.2.15.1.2,BRIDGE-MIB::dot1dStpPortPriority,Integer32,read-write,,current,,The value of the priority field that is contained in the first (in network byte order) octet of the (2 octet long) Port ID. The other octet of the Port ID is given by the value of dot1dStpPort. On bridges supporting IEEE 802.1t or IEEE 802.1w, permissible values are 0-240, in steps of 16.
.1.3.6.1.2.1.17.2.15.1.3,BRIDGE-MIB::dot1dStpPortState,INTEGER,read-only,,current,disabled(1):blocking(2):listening(3):learning(4):forwarding(5):broken(6),The port's current state, as defined by application of the Spanning Tree Protocol. This state controls what action a port takes on reception of a frame. If the bridge has detected a port that is malfunctioning, it will place that port into the broken(6) state. For ports that are disabled (see dot1dStpPortEnable), this object will have a value of disabled(1).
.1.3.6.1.2.1.17.2.15.1.4,BRIDGE-MIB::dot1dStpPortEnable,INTEGER,read-write,,current,enabled(1):disabled(2),The enabled/disabled status of the port.
.1.3.6.1.2.1.17.2.15.1.5,BRIDGE-MIB::dot1dStpPortPathCost,Integer32,read-write,,current,,The contribution of this port to the path cost of paths towards the spanning tree root which include this port. 802.1D-1998 recommends that the default value of this parameter be in inverse proportion to the speed of the attached LAN. New implementations should support dot1dStpPortPathCost32. If the port path costs exceeds the maximum value of this object then this object should report the maximum value, namely 65535. Applications should try to read the dot1dStpPortPathCost32 object if this object reports the maximum value.
.1.3.6.1.2.1.17.2.15.1.6,BRIDGE-MIB::dot1dStpPortDesignatedRoot,OCTET,read-only,,current,,The unique Bridge Identifier of the Bridge recorded as the Root in the Configuration BPDUs transmitted by the Designated Bridge for the segment to which the port is attached.
.1.3.6.1.2.1.17.2.15.1.7,BRIDGE-MIB::dot1dStpPortDesignatedCost,Integer32,read-only,,current,,The path cost of the Designated Port of the segment connected to this port. This value is compared to the Root Path Cost field in received bridge PDUs.
.1.3.6.1.2.1.17.2.15.1.8,BRIDGE-MIB::dot1dStpPortDesignatedBridge,OCTET,read-only,,current,,The Bridge Identifier of the bridge that this port considers to be the Designated Bridge for this port's segment.
.1.3.6.1.2.1.17.2.15.1.9,BRIDGE-MIB::dot1dStpPortDesignatedPort,OCTET,read-only,,current,,The Port Identifier of the port on the Designated Bridge for this port's segment.
.1.3.6.1.2.1.17.2.15.1.10,BRIDGE-MIB::dot1dStpPortForwardTransitions,Counter32,read-only,,current,,The number of times this port has transitioned from the Learning state to the Forwarding state.
.1.3.6.1.2.1.17.2.15.1.11,BRIDGE-MIB::dot1dStpPortPathCost32,Integer32,read-write,,current,,The contribution of this port to the path cost of paths towards the spanning tree root which include this port. 802.1D-1998 recommends that the default value of this parameter be in inverse proportion to the speed of the attached LAN. This object replaces dot1dStpPortPathCost to support IEEE 802.1t.
.1.3.6.1.2.1.17.3,BRIDGE-MIB::dot1dSr,,,,,,
.1.3.6.1.2.1.17.4,BRIDGE-MIB::dot1dTp,,,,,,
.1.3.6.1.2.1.17.4.1,BRIDGE-MIB::dot1dTpLearnedEntryDiscards,Counter32,read-only,,current,,The total number of Forwarding Database entries that have been or would have been learned, but have been discarded due to a lack of storage space in the Forwarding Database. If this counter is increasing, it indicates that the Forwarding Database is regularly becoming full (a condition that has unpleasant performance effects on the subnetwork). If this counter has a significant value but is not presently increasing, it indicates that the problem has been occurring but is not persistent.
.1.3.6.1.2.1.17.4.2,BRIDGE-MIB::dot1dTpAgingTime,Integer32,read-write,,current,,The timeout period in seconds for aging out dynamically-learned forwarding information. 802.1D-1998 recommends a default of 300 seconds.
.1.3.6.1.2.1.17.4.3,BRIDGE-MIB::dot1dTpFdbTable,,not-accessible,,current,,A table that contains information about unicast entries for which the bridge has forwarding and/or filtering information. This information is used by the transparent bridging function in determining how to propagate a received frame.
.1.3.6.1.2.1.17.4.3.1,BRIDGE-MIB::dot1dTpFdbEntry,,not-accessible,dot1dTpFdbAddress,current,,Information about a specific unicast MAC address for which the bridge has some forwarding and/or filtering information.
.1.3.6.1.2.1.17.4.3.1.1,BRIDGE-MIB::dot1dTpFdbAddress,OCTET,read-only,,current,,A unicast MAC address for which the bridge has forwarding and/or filtering information.
.1.3.6.1.2.1.17.4.3.1.2,BRIDGE-MIB::dot1dTpFdbPort,Integer32,read-only,,current,,Either the value '0', or the port number of the port on which a frame having a source address equal to the value of the corresponding instance of dot1dTpFdbAddress has been seen. A value of '0' indicates that the port number has not been learned, but that the bridge does have some forwarding/filtering information about this address (e.g., in the dot1dStaticTable). Implementors are encouraged to assign the port value to this object whenever it is learned, even for addresses for which the corresponding value of dot1dTpFdbStatus is not learned(3).
.1.3.6.1.2.1.17.4.3.1.3,BRIDGE-MIB::dot1dTpFdbStatus,INTEGER,read-only,,current,other(1):invalid(2):learned(3):self(4):mgmt(5),The status of this entry. The meanings of the values are: other(1) - none of the following. This would include the case where some other MIB object (not the corresponding instance of dot1dTpFdbPort, nor an entry in the dot1dStaticTable) is being used to determine if and how frames addressed to the value of the corresponding instance of dot1dTpFdbAddress are being forwarded. invalid(2) - this entry is no longer valid (e.g., it was learned but has since aged out), but has not yet been flushed from the table. learned(3) - the value of the corresponding instance of dot1dTpFdbPort was learned, and is being used. self(4) - the value of the corresponding instance of dot1dTpFdbAddress represents one of the bridge's addresses. The corresponding instance of dot1dTpFdbPort indicates which of the bridge's ports has this address. mgmt(5) - the value of the corresponding instance of dot1dTpFdbAddress is also the value of an existing instance of dot1dStaticAddress.
.1.3.6.1.2.1.17.4.4,BRIDGE-MIB::dot1dTpPortTable,,not-accessible,,current,,A table that contains information about every port that is associated with this transparent bridge.
.1.3.6.1.2.1.17.4.4.1,BRIDGE-MIB::dot1dTpPortEntry,,not-accessible,dot1dTpPort,current,,A list of information for each port of a transparent bridge.
.1.3.6.1.2.1.17.4.4.1.1,BRIDGE-MIB::dot1dTpPort,Integer32,read-only,,current,,The port number of the port for which this entry contains Transparent bridging management information.
.1.3.6.1.2.1.17.4.4.1.2,BRIDGE-MIB::dot1dTpPortMaxInfo,Integer32,read-only,,current,,The maximum size of the INFO (non-MAC) field that this port will receive or transmit.
.1.3.6.1.2.1.17.4.4.1.3,BRIDGE-MIB::dot1dTpPortInFrames,Counter32,read-only,,current,,The number of frames that have been received by this port from its segment. Note that a frame received on the interface corresponding to this port is only counted by this object if and only if it is for a protocol being processed by the local bridging function, including bridge management frames.
.1.3.6.1.2.1.17.4.4.1.4,BRIDGE-MIB::dot1dTpPortOutFrames,Counter32,read-only,,current,,The number of frames that have been transmitted by this port to its segment. Note that a frame transmitted on the interface corresponding to this port is only counted by this object if and only if it is for a protocol being processed by the local bridging function, including bridge management frames.
.1.3.6.1.2.1.17.4.4.1.5,BRIDGE-MIB::dot1dTpPortInDiscards,Counter32,read-only,,current,,Count of received valid frames that were discarded (i.e., filtered) by the Forwarding Process.
.1.3.6.1.2.1.17.4.5,P-BRIDGE-MIB::dot1dTpHCPortTable,,not-accessible,,current,,A table that contains information about every high- capacity port that is associated with this transparent bridge.
.1.3.6.1.2.1.17.4.5.1,P-BRIDGE-MIB::dot1dTpHCPortEntry,,not-accessible,dot1dTpPort,current,,Statistics information for each high-capacity port of a transparent bridge.
.1.3.6.1.2.1.17.4.5.1.1,P-BRIDGE-MIB::dot1dTpHCPortInFrames,Counter64,read-only,,current,,The number of frames that have been received by this port from its segment. Note that a frame received on the interface corresponding to this port is only counted by this object if and only if it is for a protocol being processed by the local bridging function, including bridge management frames.
.1.3.6.1.2.1.17.4.5.1.2,P-BRIDGE-MIB::dot1dTpHCPortOutFrames,Counter64,read-only,,current,,The number of frames that have been transmitted by this port to its segment. Note that a frame transmitted on the interface corresponding to this port is only counted by this object if and only if it is for a protocol being processed by the local bridging function, including bridge management frames.
.1.3.6.1.2.1.17.4.5.1.3,P-BRIDGE-MIB::dot1dTpHCPortInDiscards,Counter64,read-only,,current,,Count of valid frames that have been received by this port from its segment that were discarded (i.e., filtered) by the Forwarding Process.
.1.3.6.1.2.1.17.4.6,P-BRIDGE-MIB::dot1dTpPortOverflowTable,,not-accessible,,current,,A table that contains the most-significant bits of statistics counters for ports that are associated with this transparent bridge that are on high-capacity interfaces, as defined in the conformance clauses for this table. This table is provided as a way to read 64-bit counters for agents that support only SNMPv1. Note that the reporting of most-significant and least-significant counter bits separately runs the risk of missing an overflow of the lower bits in the interval between sampling. The manager must be aware of this possibility, even within the same varbindlist, when interpreting the results of a request or asynchronous notification.
.1.3.6.1.2.1.17.4.6.1,P-BRIDGE-MIB::dot1dTpPortOverflowEntry,,not-accessible,dot1dTpPort,current,,The most significant bits of statistics counters for a high- capacity interface of a transparent bridge. Each object is associated with a corresponding object in dot1dTpPortTable that indicates the least significant bits of the counter.
.1.3.6.1.2.1.17.4.6.1.1,P-BRIDGE-MIB::dot1dTpPortInOverflowFrames,Counter32,read-only,,current,,The number of times the associated dot1dTpPortInFrames counter has overflowed.
.1.3.6.1.2.1.17.4.6.1.2,P-BRIDGE-MIB::dot1dTpPortOutOverflowFrames,Counter32,read-only,,current,,The number of times the associated dot1dTpPortOutFrames counter has overflowed.
.1.3.6.1.2.1.17.4.6.1.3,P-BRIDGE-MIB::dot1dTpPortInOverflowDiscards,Counter32,read-only,,current,,The number of times the associated dot1dTpPortInDiscards counter has overflowed.
.1.3.6.1.2.1.17.5,BRIDGE-MIB::dot1dStatic,,,,,,
.1.3.6.1.2.1.17.5.1,BRIDGE-MIB::dot1dStaticTable,,not-accessible,,current,,A table containing filtering information configured into the bridge by (local or network) management specifying the set of ports to which frames received from specific ports and containing specific destination addresses are allowed to be forwarded. The value of zero in this table, as the port number from which frames with a specific destination address are received, is used to specify all ports for which there is no specific entry in this table for that particular destination address. Entries are valid for unicast and for group/broadcast addresses.
.1.3.6.1.2.1.17.5.1.1,BRIDGE-MIB::dot1dStaticEntry,,not-accessible,dot1dStaticAddress:dot1dStaticReceivePort,current,,Filtering information configured into the bridge by (local or network) management specifying the set of ports to which frames received from a specific port and containing a specific destination address are allowed to be forwarded.
.1.3.6.1.2.1.17.5.1.1.1,BRIDGE-MIB::dot1dStaticAddress,OCTET,read-create,,current,,The destination MAC address in a frame to which this entry's filtering information applies. This object can take the value of a unicast address, a group address, or the broadcast address.
.1.3.6.1.2.1.17.5.1.1.2,BRIDGE-MIB::dot1dStaticReceivePort,Integer32,read-create,,current,,Either the value '0', or the port number of the port from which a frame must be received in order for this entry's filtering information to apply. A value of zero indicates that this entry applies on all ports of the bridge for which there is no other applicable entry.
.1.3.6.1.2.1.17.5.1.1.3,BRIDGE-MIB::dot1dStaticAllowedToGoTo,OCTET,read-create,,current,,The set of ports to which frames received from a specific port and destined for a specific MAC address, are allowed to be forwarded. Each octet within the value of this object specifies a set of eight ports, with the first octet specifying ports 1 through 8, the second octet specifying ports 9 through 16, etc. Within each octet, the most significant bit represents the lowest numbered port, and the least significant bit represents the highest numbered port. Thus, each port of the bridge is represented by a single bit within the value of this object. If that bit has a value of '1', then that port is included in the set of ports; the port is not included if its bit has a value of '0'. (Note that the setting of the bit corresponding to the port from which a frame is received is irrelevant.) The default value of this object is a string of ones of appropriate length. The value of this object may exceed the required minimum maximum message size of some SNMP transport (484 bytes, in the case of SNMP over UDP, see RFC 3417, section 3.2). SNMP engines on bridges supporting a large number of ports must support appropriate maximum message sizes.
.1.3.6.1.2.1.17.5.1.1.4,BRIDGE-MIB::dot1dStaticStatus,INTEGER,read-create,,current,other(1):invalid(2):permanent(3):deleteOnReset(4):deleteOnTimeout(5),This object indicates the status of this entry. The default value is permanent(3). other(1) - this entry is currently in use but the conditions under which it will remain so are different from each of the following values. invalid(2) - writing this value to the object removes the corresponding entry. permanent(3) - this entry is currently in use and will remain so after the next reset of the bridge. deleteOnReset(4) - this entry is currently in use and will remain so until the next reset of the bridge. deleteOnTimeout(5) - this entry is currently in use and will remain so until it is aged out.
.1.3.6.1.2.1.17.6,P-BRIDGE-MIB::pBridgeMIB,,,,,,The Bridge MIB Extension module for managing Priority and Multicast Filtering, defined by IEEE 802.1D-1998, including Restricted Group Registration defined by IEEE 802.1t-2001. Copyright (C) The Internet Society (2006). This version of this MIB module is part of RFC 4363; See the RFC itself for full legal notices.
.1.3.6.1.2.1.17.6.1,P-BRIDGE-MIB::pBridgeMIBObjects,,,,,,
.1.3.6.1.2.1.17.6.1.1,P-BRIDGE-MIB::dot1dExtBase,,,,,,
.1.3.6.1.2.1.17.6.1.1.1,P-BRIDGE-MIB::dot1dDeviceCapabilities,BITS,read-only,,current,dot1dExtendedFilteringServices(0):dot1dTrafficClasses(1):dot1qStaticEntryIndividualPort(2):dot1qIVLCapable(3):dot1qSVLCapable(4):dot1qHybridCapable(5):dot1qConfigurablePvidTagging(6):dot1dLocalVlanCapable(7),Indicates the optional parts of IEEE 802.1D and 802.1Q that are implemented by this device and are manageable through this MIB. Capabilities that are allowed on a per-port basis are indicated in dot1dPortCapabilities. dot1dExtendedFilteringServices(0), -- can perform filtering of -- individual multicast addresses -- controlled by GMRP. dot1dTrafficClasses(1), -- can map user priority to -- multiple traffic classes. dot1qStaticEntryIndividualPort(2), -- dot1qStaticUnicastReceivePort & -- dot1qStaticMulticastReceivePort -- can represent non-zero entries. dot1qIVLCapable(3), -- Independent VLAN Learning (IVL). dot1qSVLCapable(4), -- Shared VLAN Learning (SVL). dot1qHybridCapable(5), -- both IVL & SVL simultaneously. dot1qConfigurablePvidTagging(6), -- whether the implementation -- supports the ability to -- override the default PVID -- setting and its egress status -- (VLAN-Tagged or Untagged) on -- each port. dot1dLocalVlanCapable(7) -- can support multiple local -- bridges, outside of the scope -- of 802.1Q defined VLANs.
.1.3.6.1.2.1.17.6.1.1.2,P-BRIDGE-MIB::dot1dTrafficClassesEnabled,INTEGER,read-write,,current,true(1):false(2),The value true(1) indicates that Traffic Classes are enabled on this bridge. When false(2), the bridge operates with a single priority level for all traffic. The value of this object MUST be retained across reinitializations of the management system.
.1.3.6.1.2.1.17.6.1.1.3,P-BRIDGE-MIB::dot1dGmrpStatus,INTEGER,read-write,,current,enabled(1):disabled(2),The administrative status requested by management for GMRP. The value enabled(1) indicates that GMRP should be enabled on this device, in all VLANs, on all ports for which it has not been specifically disabled. When disabled(2), GMRP is disabled, in all VLANs and on all ports, and all GMRP packets will be forwarded transparently. This object affects both Applicant and Registrar state machines. A transition from disabled(2) to enabled(1) will cause a reset of all GMRP state machines on all ports. The value of this object MUST be retained across reinitializations of the management system.
.1.3.6.1.2.1.17.6.1.1.4,P-BRIDGE-MIB::dot1dPortCapabilitiesTable,,not-accessible,,current,,A table that contains capabilities information about every port that is associated with this bridge.
.1.3.6.1.2.1.17.6.1.1.4.1,P-BRIDGE-MIB::dot1dPortCapabilitiesEntry,,not-accessible,,current,,A set of capabilities information about this port indexed by dot1dBasePort.
.1.3.6.1.2.1.17.6.1.1.4.1.1,P-BRIDGE-MIB::dot1dPortCapabilities,BITS,read-only,,current,dot1qDot1qTagging(0):dot1qConfigurableAcceptableFrameTypes(1):dot1qIngressFiltering(2),Indicates the parts of IEEE 802.1D and 802.1Q that are optional on a per-port basis, that are implemented by this device, and that are manageable through this MIB. dot1qDot1qTagging(0), -- supports 802.1Q VLAN tagging of -- frames and GVRP. dot1qConfigurableAcceptableFrameTypes(1), -- allows modified values of -- dot1qPortAcceptableFrameTypes. dot1qIngressFiltering(2) -- supports the discarding of any -- frame received on a Port whose -- VLAN classification does not -- include that Port in its Member -- set.
.1.3.6.1.2.1.17.6.1.2,P-BRIDGE-MIB::dot1dPriority,,,,,,
.1.3.6.1.2.1.17.6.1.2.1,P-BRIDGE-MIB::dot1dPortPriorityTable,,not-accessible,,current,,A table that contains information about every port that is associated with this transparent bridge.
.1.3.6.1.2.1.17.6.1.2.1.1,P-BRIDGE-MIB::dot1dPortPriorityEntry,,not-accessible,,current,,A list of Default User Priorities for each port of a transparent bridge. This is indexed by dot1dBasePort.
.1.3.6.1.2.1.17.6.1.2.1.1.1,P-BRIDGE-MIB::dot1dPortDefaultUserPriority,Integer32,read-write,,current,,The default ingress User Priority for this port. This only has effect on media, such as Ethernet, that do not support native User Priority. The value of this object MUST be retained across reinitializations of the management system.
.1.3.6.1.2.1.17.6.1.2.1.1.2,P-BRIDGE-MIB::dot1dPortNumTrafficClasses,Integer32,read-write,,current,,The number of egress traffic classes supported on this port. This object may optionally be read-only. The value of this object MUST be retained across reinitializations of the management system.
.1.3.6.1.2.1.17.6.1.2.2,P-BRIDGE-MIB::dot1dUserPriorityRegenTable,,not-accessible,,current,,A list of Regenerated User Priorities for each received User Priority on each port of a bridge. The Regenerated User Priority value may be used to index the Traffic Class Table for each input port. This only has effect on media that support native User Priority. The default values for Regenerated User Priorities are the same as the User Priorities.
.1.3.6.1.2.1.17.6.1.2.2.1,P-BRIDGE-MIB::dot1dUserPriorityRegenEntry,,not-accessible,dot1dBasePort:dot1dUserPriority,current,,A mapping of incoming User Priority to a Regenerated User Priority.
.1.3.6.1.2.1.17.6.1.2.2.1.1,P-BRIDGE-MIB::dot1dUserPriority,Integer32,not-accessible,,current,,The User Priority for a frame received on this port.
.1.3.6.1.2.1.17.6.1.2.2.1.2,P-BRIDGE-MIB::dot1dRegenUserPriority,Integer32,read-write,,current,,The Regenerated User Priority that the incoming User Priority is mapped to for this port. The value of this object MUST be retained across reinitializations of the management system.
.1.3.6.1.2.1.17.6.1.2.3,P-BRIDGE-MIB::dot1dTrafficClassTable,,not-accessible,,current,,A table mapping evaluated User Priority to Traffic Class, for forwarding by the bridge. Traffic class is a number in the range (0..(dot1dPortNumTrafficClasses-1)).
.1.3.6.1.2.1.17.6.1.2.3.1,P-BRIDGE-MIB::dot1dTrafficClassEntry,,not-accessible,dot1dBasePort:dot1dTrafficClassPriority,current,,User Priority to Traffic Class mapping.
.1.3.6.1.2.1.17.6.1.2.3.1.1,P-BRIDGE-MIB::dot1dTrafficClassPriority,Integer32,not-accessible,,current,,The Priority value determined for the received frame. This value is equivalent to the priority indicated in the tagged frame received, or one of the evaluated priorities, determined according to the media-type. For untagged frames received from Ethernet media, this value is equal to the dot1dPortDefaultUserPriority value for the ingress port. For untagged frames received from non-Ethernet media, this value is equal to the dot1dRegenUserPriority value for the ingress port and media-specific user priority.
.1.3.6.1.2.1.17.6.1.2.3.1.2,P-BRIDGE-MIB::dot1dTrafficClass,Integer32,read-write,,current,,The Traffic Class the received frame is mapped to. The value of this object MUST be retained across reinitializations of the management system.
.1.3.6.1.2.1.17.6.1.2.4,P-BRIDGE-MIB::dot1dPortOutboundAccessPriorityTable,,not-accessible,,current,,A table mapping Regenerated User Priority to Outbound Access Priority. This is a fixed mapping for all port types, with two options for 802.5 Token Ring.
.1.3.6.1.2.1.17.6.1.2.4.1,P-BRIDGE-MIB::dot1dPortOutboundAccessPriorityEntry,,not-accessible,dot1dBasePort:dot1dRegenUserPriority,current,,Regenerated User Priority to Outbound Access Priority mapping.
.1.3.6.1.2.1.17.6.1.2.4.1.1,P-BRIDGE-MIB::dot1dPortOutboundAccessPriority,Integer32,read-only,,current,,The Outbound Access Priority the received frame is mapped to.
.1.3.6.1.2.1.17.6.1.3,P-BRIDGE-MIB::dot1dGarp,,,,,,
.1.3.6.1.2.1.17.6.1.3.1,P-BRIDGE-MIB::dot1dPortGarpTable,,not-accessible,,current,,A table of GARP control information about every bridge port. This is indexed by dot1dBasePort.
.1.3.6.1.2.1.17.6.1.3.1.1,P-BRIDGE-MIB::dot1dPortGarpEntry,,not-accessible,,current,,GARP control information for a bridge port.
.1.3.6.1.2.1.17.6.1.3.1.1.1,P-BRIDGE-MIB::dot1dPortGarpJoinTime,INTEGER,read-write,,current,,The GARP Join time, in centiseconds. The value of this object MUST be retained across reinitializations of the management system.
.1.3.6.1.2.1.17.6.1.3.1.1.2,P-BRIDGE-MIB::dot1dPortGarpLeaveTime,INTEGER,read-write,,current,,The GARP Leave time, in centiseconds. The value of this object MUST be retained across reinitializations of the management system.
.1.3.6.1.2.1.17.6.1.3.1.1.3,P-BRIDGE-MIB::dot1dPortGarpLeaveAllTime,INTEGER,read-write,,current,,The GARP LeaveAll time, in centiseconds. The value of this object MUST be retained across reinitializations of the management system.
.1.3.6.1.2.1.17.6.1.4,P-BRIDGE-MIB::dot1dGmrp,,,,,,
.1.3.6.1.2.1.17.6.1.4.1,P-BRIDGE-MIB::dot1dPortGmrpTable,,not-accessible,,current,,A table of GMRP control and status information about every bridge port. Augments the dot1dBasePortTable.
.1.3.6.1.2.1.17.6.1.4.1.1,P-BRIDGE-MIB::dot1dPortGmrpEntry,,not-accessible,,current,,GMRP control and status information for a bridge port.
.1.3.6.1.2.1.17.6.1.4.1.1.1,P-BRIDGE-MIB::dot1dPortGmrpStatus,INTEGER,read-write,,current,enabled(1):disabled(2),The administrative state of GMRP operation on this port. The value enabled(1) indicates that GMRP is enabled on this port in all VLANs as long as dot1dGmrpStatus is also enabled(1). A value of disabled(2) indicates that GMRP is disabled on this port in all VLANs: any GMRP packets received will be silently discarded, and no GMRP registrations will be propagated from other ports. Setting this to a value of enabled(1) will be stored by the agent but will only take effect on the GMRP protocol operation if dot1dGmrpStatus also indicates the value enabled(1). This object affects all GMRP Applicant and Registrar state machines on this port. A transition from disabled(2) to enabled(1) will cause a reset of all GMRP state machines on this port. The value of this object MUST be retained across reinitializations of the management system.
.1.3.6.1.2.1.17.6.1.4.1.1.2,P-BRIDGE-MIB::dot1dPortGmrpFailedRegistrations,Counter32,read-only,,current,,The total number of failed GMRP registrations, for any reason, in all VLANs, on this port.
.1.3.6.1.2.1.17.6.1.4.1.1.3,P-BRIDGE-MIB::dot1dPortGmrpLastPduOrigin,OCTET,read-only,,current,,The Source MAC Address of the last GMRP message received on this port.
.1.3.6.1.2.1.17.6.1.4.1.1.4,P-BRIDGE-MIB::dot1dPortRestrictedGroupRegistration,INTEGER,read-write,,current,true(1):false(2),The state of Restricted Group Registration on this port. If the value of this control is true(1), then creation of a new dynamic entry is permitted only if there is a Static Filtering Entry for the VLAN concerned, in which the Registrar Administrative Control value is Normal Registration. The value of this object MUST be retained across reinitializations of the management system.
.1.3.6.1.2.1.17.6.2,P-BRIDGE-MIB::pBridgeConformance,,,,,,
.1.3.6.1.2.1.17.6.2.1,P-BRIDGE-MIB::pBridgeGroups,,,,,,
.1.3.6.1.2.1.17.6.2.1.1,P-BRIDGE-MIB::pBridgeExtCapGroup,,,,,,A collection of objects indicating the optional capabilities of the device.
.1.3.6.1.2.1.17.6.2.1.2,P-BRIDGE-MIB::pBridgeDeviceGmrpGroup,,,,,,A collection of objects providing device-level control for the Multicast Filtering extended bridge services.
.1.3.6.1.2.1.17.6.2.1.3,P-BRIDGE-MIB::pBridgeDevicePriorityGroup,,,,,,A collection of objects providing device-level control for the Priority services.
.1.3.6.1.2.1.17.6.2.1.4,P-BRIDGE-MIB::pBridgeDefaultPriorityGroup,,,,,,A collection of objects defining the User Priority applicable to each port for media that do not support native User Priority.
.1.3.6.1.2.1.17.6.2.1.5,P-BRIDGE-MIB::pBridgeRegenPriorityGroup,,,,,,A collection of objects defining the User Priorities applicable to each port for media that support native User Priority.
.1.3.6.1.2.1.17.6.2.1.6,P-BRIDGE-MIB::pBridgePriorityGroup,,,,,,A collection of objects defining the traffic classes within a bridge for each evaluated User Priority.
.1.3.6.1.2.1.17.6.2.1.7,P-BRIDGE-MIB::pBridgeAccessPriorityGroup,,,,,,A collection of objects defining the media-dependent outbound access level for each priority.
.1.3.6.1.2.1.17.6.2.1.8,P-BRIDGE-MIB::pBridgePortGarpGroup,,,,,,A collection of objects providing port level control and status information for GARP operation.
.1.3.6.1.2.1.17.6.2.1.9,P-BRIDGE-MIB::pBridgePortGmrpGroup,,,,,,A collection of objects providing port level control and status information for GMRP operation.
.1.3.6.1.2.1.17.6.2.1.10,P-BRIDGE-MIB::pBridgeHCPortGroup,,,,,,A collection of objects providing 64-bit statistics counters for high-capacity bridge ports.
.1.3.6.1.2.1.17.6.2.1.11,P-BRIDGE-MIB::pBridgePortOverflowGroup,,,,,,A collection of objects providing overflow statistics counters for high-capacity bridge ports.
.1.3.6.1.2.1.17.6.2.1.12,P-BRIDGE-MIB::pBridgePortGmrpGroup2,,,,,,A collection of objects providing port level control and status information for GMRP operation.
.1.3.6.1.2.1.17.6.2.2,P-BRIDGE-MIB::pBridgeCompliances,,,,,,
.1.3.6.1.2.1.17.6.2.2.1,P-BRIDGE-MIB::pBridgeCompliance,,,,,,The compliance statement for device support of Priority and Multicast Filtering extended bridging services.
.1.3.6.1.2.1.17.6.2.2.2,P-BRIDGE-MIB::pBridgeCompliance2,,,,,,The compliance statement for device support of Priority and Multicast Filtering extended bridging services.
.1.3.6.1.2.1.17.7,Q-BRIDGE-MIB::qBridgeMIB,,,,,,The VLAN Bridge MIB module for managing Virtual Bridged Local Area Networks, as defined by IEEE 802.1Q-2003, including Restricted Vlan Registration defined by IEEE 802.1u-2001 and Vlan Classification defined by IEEE 802.1v-2001. Copyright (C) The Internet Society (2006). This version of this MIB module is part of RFC 4363; See the RFC itself for full legal notices.
.1.3.6.1.2.1.17.7.1,Q-BRIDGE-MIB::qBridgeMIBObjects,,,,,,
.1.3.6.1.2.1.17.7.1.1,Q-BRIDGE-MIB::dot1qBase,,,,,,
.1.3.6.1.2.1.17.7.1.1.1,Q-BRIDGE-MIB::dot1qVlanVersionNumber,INTEGER,read-only,,current,version1(1),The version number of IEEE 802.1Q that this device supports.
.1.3.6.1.2.1.17.7.1.1.2,Q-BRIDGE-MIB::dot1qMaxVlanId,Integer32,read-only,,current,,The maximum IEEE 802.1Q VLAN-ID that this device supports.
.1.3.6.1.2.1.17.7.1.1.3,Q-BRIDGE-MIB::dot1qMaxSupportedVlans,Unsigned32,read-only,,current,,The maximum number of IEEE 802.1Q VLANs that this device supports.
.1.3.6.1.2.1.17.7.1.1.4,Q-BRIDGE-MIB::dot1qNumVlans,Unsigned32,read-only,,current,,The current number of IEEE 802.1Q VLANs that are configured in this device.
.1.3.6.1.2.1.17.7.1.1.5,Q-BRIDGE-MIB::dot1qGvrpStatus,INTEGER,read-write,,current,enabled(1):disabled(2),The administrative status requested by management for GVRP. The value enabled(1) indicates that GVRP should be enabled on this device, on all ports for which it has not been specifically disabled. When disabled(2), GVRP is disabled on all ports, and all GVRP packets will be forwarded transparently. This object affects all GVRP Applicant and Registrar state machines. A transition from disabled(2) to enabled(1) will cause a reset of all GVRP state machines on all ports. The value of this object MUST be retained across reinitializations of the management system.
.1.3.6.1.2.1.17.7.1.2,Q-BRIDGE-MIB::dot1qTp,,,,,,
.1.3.6.1.2.1.17.7.1.2.1,Q-BRIDGE-MIB::dot1qFdbTable,,not-accessible,,current,,A table that contains configuration and control information for each Filtering Database currently operating on this device. Entries in this table appear automatically when VLANs are assigned FDB IDs in the dot1qVlanCurrentTable.
.1.3.6.1.2.1.17.7.1.2.1.1,Q-BRIDGE-MIB::dot1qFdbEntry,,not-accessible,dot1qFdbId,current,,Information about a specific Filtering Database.
.1.3.6.1.2.1.17.7.1.2.1.1.1,Q-BRIDGE-MIB::dot1qFdbId,Unsigned32,not-accessible,,current,,The identity of this Filtering Database.
.1.3.6.1.2.1.17.7.1.2.1.1.2,Q-BRIDGE-MIB::dot1qFdbDynamicCount,Counter32,read-only,,current,,The current number of dynamic entries in this Filtering Database.
.1.3.6.1.2.1.17.7.1.2.2,Q-BRIDGE-MIB::dot1qTpFdbTable,,not-accessible,,current,,A table that contains information about unicast entries for which the device has forwarding and/or filtering information. This information is used by the transparent bridging function in determining how to propagate a received frame.
.1.3.6.1.2.1.17.7.1.2.2.1,Q-BRIDGE-MIB::dot1qTpFdbEntry,,not-accessible,dot1qFdbId:dot1qTpFdbAddress,current,,Information about a specific unicast MAC address for which the device has some forwarding and/or filtering information.
.1.3.6.1.2.1.17.7.1.2.2.1.1,Q-BRIDGE-MIB::dot1qTpFdbAddress,OCTET,not-accessible,,current,,A unicast MAC address for which the device has forwarding and/or filtering information.
.1.3.6.1.2.1.17.7.1.2.2.1.2,Q-BRIDGE-MIB::dot1qTpFdbPort,Integer32,read-only,,current,,Either the value '0', or the port number of the port on which a frame having a source address equal to the value of the corresponding instance of dot1qTpFdbAddress has been seen. A value of '0' indicates that the port number has not been learned but that the device does have some forwarding/filtering information about this address (e.g., in the dot1qStaticUnicastTable). Implementors are encouraged to assign the port value to this object whenever it is learned, even for addresses for which the corresponding value of dot1qTpFdbStatus is not learned(3).
.1.3.6.1.2.1.17.7.1.2.2.1.3,Q-BRIDGE-MIB::dot1qTpFdbStatus,INTEGER,read-only,,current,other(1):invalid(2):learned(3):self(4):mgmt(5),The status of this entry. The meanings of the values are: other(1) - none of the following. This may include the case where some other MIB object (not the corresponding instance of dot1qTpFdbPort, nor an entry in the dot1qStaticUnicastTable) is being used to determine if and how frames addressed to the value of the corresponding instance of dot1qTpFdbAddress are being forwarded. invalid(2) - this entry is no longer valid (e.g., it was learned but has since aged out), but has not yet been flushed from the table. learned(3) - the value of the corresponding instance of dot1qTpFdbPort was learned and is being used. self(4) - the value of the corresponding instance of dot1qTpFdbAddress represents one of the device's addresses. The corresponding instance of dot1qTpFdbPort indicates which of the device's ports has this address. mgmt(5) - the value of the corresponding instance of dot1qTpFdbAddress is also the value of an existing instance of dot1qStaticAddress.
.1.3.6.1.2.1.17.7.1.2.3,Q-BRIDGE-MIB::dot1qTpGroupTable,,not-accessible,,current,,A table containing filtering information for VLANs configured into the bridge by (local or network) management, or learned dynamically, specifying the set of ports to which frames received on a VLAN for this FDB and containing a specific Group destination address are allowed to be forwarded.
.1.3.6.1.2.1.17.7.1.2.3.1,Q-BRIDGE-MIB::dot1qTpGroupEntry,,not-accessible,dot1qVlanIndex:dot1qTpGroupAddress,current,,Filtering information configured into the bridge by management, or learned dynamically, specifying the set of ports to which frames received on a VLAN and containing a specific Group destination address are allowed to be forwarded. The subset of these ports learned dynamically is also provided.
.1.3.6.1.2.1.17.7.1.2.3.1.1,Q-BRIDGE-MIB::dot1qTpGroupAddress,OCTET,not-accessible,,current,,The destination Group MAC address in a frame to which this entry's filtering information applies.
.1.3.6.1.2.1.17.7.1.2.3.1.2,Q-BRIDGE-MIB::dot1qTpGroupEgressPorts,OCTET,read-only,,current,,The complete set of ports, in this VLAN, to which frames destined for this Group MAC address are currently being explicitly forwarded. This does not include ports for which this address is only implicitly forwarded, in the dot1qForwardAllPorts list.
.1.3.6.1.2.1.17.7.1.2.3.1.3,Q-BRIDGE-MIB::dot1qTpGroupLearnt,OCTET,read-only,,current,,The subset of ports in dot1qTpGroupEgressPorts that were learned by GMRP or some other dynamic mechanism, in this Filtering database.
.1.3.6.1.2.1.17.7.1.2.4,Q-BRIDGE-MIB::dot1qForwardAllTable,,not-accessible,,current,,A table containing forwarding information for each VLAN, specifying the set of ports to which forwarding of all multicasts applies, configured statically by management or dynamically by GMRP. An entry appears in this table for all VLANs that are currently instantiated.
.1.3.6.1.2.1.17.7.1.2.4.1,Q-BRIDGE-MIB::dot1qForwardAllEntry,,not-accessible,dot1qVlanIndex,current,,Forwarding information for a VLAN, specifying the set of ports to which all multicasts should be forwarded, configured statically by management or dynamically by GMRP.
.1.3.6.1.2.1.17.7.1.2.4.1.1,Q-BRIDGE-MIB::dot1qForwardAllPorts,OCTET,read-only,,current,,The complete set of ports in this VLAN to which all multicast group-addressed frames are to be forwarded. This includes ports for which this need has been determined dynamically by GMRP, or configured statically by management.
.1.3.6.1.2.1.17.7.1.2.4.1.2,Q-BRIDGE-MIB::dot1qForwardAllStaticPorts,OCTET,read-write,,current,,The set of ports configured by management in this VLAN to which all multicast group-addressed frames are to be forwarded. Ports entered in this list will also appear in the complete set shown by dot1qForwardAllPorts. This value will be restored after the device is reset. This only applies to ports that are members of the VLAN, defined by dot1qVlanCurrentEgressPorts. A port may not be added in this set if it is already a member of the set of ports in dot1qForwardAllForbiddenPorts. The default value is a string of ones of appropriate length, to indicate the standard behaviour of using basic filtering services, i.e., forward all multicasts to all ports. The value of this object MUST be retained across reinitializations of the management system.
.1.3.6.1.2.1.17.7.1.2.4.1.3,Q-BRIDGE-MIB::dot1qForwardAllForbiddenPorts,OCTET,read-write,,current,,The set of ports configured by management in this VLAN for which the Service Requirement attribute Forward All Multicast Groups may not be dynamically registered by GMRP. This value will be restored after the device is reset. A port may not be added in this set if it is already a member of the set of ports in dot1qForwardAllStaticPorts. The default value is a string of zeros of appropriate length. The value of this object MUST be retained across reinitializations of the management system.
.1.3.6.1.2.1.17.7.1.2.5,Q-BRIDGE-MIB::dot1qForwardUnregisteredTable,,not-accessible,,current,,A table containing forwarding information for each VLAN, specifying the set of ports to which forwarding of multicast group-addressed frames for which no more specific forwarding information applies. This is configured statically by management and determined dynamically by GMRP. An entry appears in this table for all VLANs that are currently instantiated.
.1.3.6.1.2.1.17.7.1.2.5.1,Q-BRIDGE-MIB::dot1qForwardUnregisteredEntry,,not-accessible,dot1qVlanIndex,current,,Forwarding information for a VLAN, specifying the set of ports to which all multicasts for which there is no more specific forwarding information shall be forwarded. This is configured statically by management or dynamically by GMRP.
.1.3.6.1.2.1.17.7.1.2.5.1.1,Q-BRIDGE-MIB::dot1qForwardUnregisteredPorts,OCTET,read-only,,current,,The complete set of ports in this VLAN to which multicast group-addressed frames for which there is no more specific forwarding information will be forwarded. This includes ports for which this need has been determined dynamically by GMRP, or configured statically by management.
.1.3.6.1.2.1.17.7.1.2.5.1.2,Q-BRIDGE-MIB::dot1qForwardUnregisteredStaticPorts,OCTET,read-write,,current,,The set of ports configured by management, in this VLAN, to which multicast group-addressed frames for which there is no more specific forwarding information are to be forwarded. Ports entered in this list will also appear in the complete set shown by dot1qForwardUnregisteredPorts. This value will be restored after the device is reset. A port may not be added in this set if it is already a member of the set of ports in dot1qForwardUnregisteredForbiddenPorts. The default value is a string of zeros of appropriate length, although this has no effect with the default value of dot1qForwardAllStaticPorts. The value of this object MUST be retained across reinitializations of the management system.
.1.3.6.1.2.1.17.7.1.2.5.1.3,Q-BRIDGE-MIB::dot1qForwardUnregisteredForbiddenPorts,OCTET,read-write,,current,,The set of ports configured by management in this VLAN for which the Service Requirement attribute Forward Unregistered Multicast Groups may not be dynamically registered by GMRP. This value will be restored after the device is reset. A port may not be added in this set if it is already a member of the set of ports in dot1qForwardUnregisteredStaticPorts. The default value is a string of zeros of appropriate length. The value of this object MUST be retained across reinitializations of the management system.
.1.3.6.1.2.1.17.7.1.3,Q-BRIDGE-MIB::dot1qStatic,,,,,,
.1.3.6.1.2.1.17.7.1.3.1,Q-BRIDGE-MIB::dot1qStaticUnicastTable,,not-accessible,,current,,A table containing filtering information for Unicast MAC addresses for each Filtering Database, configured into the device by (local or network) management specifying the set of ports to which frames received from specific ports and containing specific unicast destination addresses are allowed to be forwarded. A value of zero in this table (as the port number from which frames with a specific destination address are received) is used to specify all ports for which there is no specific entry in this table for that particular destination address. Entries are valid for unicast addresses only.
.1.3.6.1.2.1.17.7.1.3.1.1,Q-BRIDGE-MIB::dot1qStaticUnicastEntry,,not-accessible,dot1qFdbId:dot1qStaticUnicastAddress:dot1qStaticUnicastReceivePort,current,,Filtering information configured into the device by (local or network) management specifying the set of ports to which frames received from a specific port and containing a specific unicast destination address are allowed to be forwarded.
.1.3.6.1.2.1.17.7.1.3.1.1.1,Q-BRIDGE-MIB::dot1qStaticUnicastAddress,OCTET,not-accessible,,current,,The destination MAC address in a frame to which this entry's filtering information applies. This object must take the value of a unicast address.
.1.3.6.1.2.1.17.7.1.3.1.1.2,Q-BRIDGE-MIB::dot1qStaticUnicastReceivePort,Integer32,not-accessible,,current,,Either the value '0' or the port number of the port from which a frame must be received in order for this entry's filtering information to apply. A value of zero indicates that this entry applies on all ports of the device for which there is no other applicable entry.
.1.3.6.1.2.1.17.7.1.3.1.1.3,Q-BRIDGE-MIB::dot1qStaticUnicastAllowedToGoTo,OCTET,read-write,,current,,The set of ports for which a frame with a specific unicast address will be flooded in the event that it has not been learned. It also specifies the set of ports on which a specific unicast address may be dynamically learned. The dot1qTpFdbTable will have an equivalent entry with a dot1qTpFdbPort value of '0' until this address has been learned, at which point it will be updated with the port the address has been seen on. This only applies to ports that are members of the VLAN, defined by dot1qVlanCurrentEgressPorts. The default value of this object is a string of ones of appropriate length. The value of this object MUST be retained across reinitializations of the management system.
.1.3.6.1.2.1.17.7.1.3.1.1.4,Q-BRIDGE-MIB::dot1qStaticUnicastStatus,INTEGER,read-write,,current,other(1):invalid(2):permanent(3):deleteOnReset(4):deleteOnTimeout(5),This object indicates the status of this entry. other(1) - this entry is currently in use, but the conditions under which it will remain so differ from the following values. invalid(2) - writing this value to the object removes the corresponding entry. permanent(3) - this entry is currently in use and will remain so after the next reset of the bridge. deleteOnReset(4) - this entry is currently in use and will remain so until the next reset of the bridge. deleteOnTimeout(5) - this entry is currently in use and will remain so until it is aged out. The value of this object MUST be retained across reinitializations of the management system.
.1.3.6.1.2.1.17.7.1.3.2,Q-BRIDGE-MIB::dot1qStaticMulticastTable,,not-accessible,,current,,A table containing filtering information for Multicast and Broadcast MAC addresses for each VLAN, configured into the device by (local or network) management specifying the set of ports to which frames received from specific ports and containing specific Multicast and Broadcast destination addresses are allowed to be forwarded. A value of zero in this table (as the port number from which frames with a specific destination address are received) is used to specify all ports for which there is no specific entry in this table for that particular destination address. Entries are valid for Multicast and Broadcast addresses only.
.1.3.6.1.2.1.17.7.1.3.2.1,Q-BRIDGE-MIB::dot1qStaticMulticastEntry,,not-accessible,dot1qVlanIndex:dot1qStaticMulticastAddress:dot1qStaticMulticastReceivePort,current,,Filtering information configured into the device by (local or network) management specifying the set of ports to which frames received from this specific port for this VLAN and containing this Multicast or Broadcast destination address are allowed to be forwarded.
.1.3.6.1.2.1.17.7.1.3.2.1.1,Q-BRIDGE-MIB::dot1qStaticMulticastAddress,OCTET,not-accessible,,current,,The destination MAC address in a frame to which this entry's filtering information applies. This object must take the value of a Multicast or Broadcast address.
.1.3.6.1.2.1.17.7.1.3.2.1.2,Q-BRIDGE-MIB::dot1qStaticMulticastReceivePort,Integer32,not-accessible,,current,,Either the value '0' or the port number of the port from which a frame must be received in order for this entry's filtering information to apply. A value of zero indicates that this entry applies on all ports of the device for which there is no other applicable entry.
.1.3.6.1.2.1.17.7.1.3.2.1.3,Q-BRIDGE-MIB::dot1qStaticMulticastStaticEgressPorts,OCTET,read-write,,current,,The set of ports to which frames received from a specific port and destined for a specific Multicast or Broadcast MAC address must be forwarded, regardless of any dynamic information, e.g., from GMRP. A port may not be added in this set if it is already a member of the set of ports in dot1qStaticMulticastForbiddenEgressPorts. The default value of this object is a string of ones of appropriate length. The value of this object MUST be retained across reinitializations of the management system.
.1.3.6.1.2.1.17.7.1.3.2.1.4,Q-BRIDGE-MIB::dot1qStaticMulticastForbiddenEgressPorts,OCTET,read-write,,current,,The set of ports to which frames received from a specific port and destined for a specific Multicast or Broadcast MAC address must not be forwarded, regardless of any dynamic information, e.g., from GMRP. A port may not be added in this set if it is already a member of the set of ports in dot1qStaticMulticastStaticEgressPorts. The default value of this object is a string of zeros of appropriate length. The value of this object MUST be retained across reinitializations of the management system.
.1.3.6.1.2.1.17.7.1.3.2.1.5,Q-BRIDGE-MIB::dot1qStaticMulticastStatus,INTEGER,read-write,,current,other(1):invalid(2):permanent(3):deleteOnReset(4):deleteOnTimeout(5),This object indicates the status of this entry. other(1) - this entry is currently in use, but the conditions under which it will remain so differ from the following values. invalid(2) - writing this value to the object removes the corresponding entry. permanent(3) - this entry is currently in use and will remain so after the next reset of the bridge. deleteOnReset(4) - this entry is currently in use and will remain so until the next reset of the bridge. deleteOnTimeout(5) - this entry is currently in use and will remain so until it is aged out. The value of this object MUST be retained across reinitializations of the management system.
.1.3.6.1.2.1.17.7.1.4,Q-BRIDGE-MIB::dot1qVlan,,,,,,
.1.3.6.1.2.1.17.7.1.4.1,Q-BRIDGE-MIB::dot1qVlanNumDeletes,Counter32,read-only,,current,,The number of times a VLAN entry has been deleted from the dot1qVlanCurrentTable (for any reason). If an entry is deleted, then inserted, and then deleted, this counter will be incremented by 2.
.1.3.6.1.2.1.17.7.1.4.2,Q-BRIDGE-MIB::dot1qVlanCurrentTable,,not-accessible,,current,,A table containing current configuration information for each VLAN currently configured into the device by (local or network) management, or dynamically created as a result of GVRP requests received.
.1.3.6.1.2.1.17.7.1.4.2.1,Q-BRIDGE-MIB::dot1qVlanCurrentEntry,,not-accessible,dot1qVlanTimeMark:dot1qVlanIndex,current,,Information for a VLAN configured into the device by (local or network) management, or dynamically created as a result of GVRP requests received.
.1.3.6.1.2.1.17.7.1.4.2.1.1,Q-BRIDGE-MIB::dot1qVlanTimeMark,TimeTicks,not-accessible,,current,,A TimeFilter for this entry. See the TimeFilter textual convention to see how this works.
.1.3.6.1.2.1.17.7.1.4.2.1.2,Q-BRIDGE-MIB::dot1qVlanIndex,Unsigned32,not-accessible,,current,,The VLAN-ID or other identifier referring to this VLAN.
.1.3.6.1.2.1.17.7.1.4.2.1.3,Q-BRIDGE-MIB::dot1qVlanFdbId,Unsigned32,read-only,,current,,The Filtering Database used by this VLAN. This is one of the dot1qFdbId values in the dot1qFdbTable. This value is allocated automatically by the device whenever the VLAN is created: either dynamically by GVRP, or by management, in dot1qVlanStaticTable. Allocation of this value follows the learning constraints defined for this VLAN in dot1qLearningConstraintsTable.
.1.3.6.1.2.1.17.7.1.4.2.1.4,Q-BRIDGE-MIB::dot1qVlanCurrentEgressPorts,OCTET,read-only,,current,,The set of ports that are transmitting traffic for this VLAN as either tagged or untagged frames.
.1.3.6.1.2.1.17.7.1.4.2.1.5,Q-BRIDGE-MIB::dot1qVlanCurrentUntaggedPorts,OCTET,read-only,,current,,The set of ports that are transmitting traffic for this VLAN as untagged frames.
.1.3.6.1.2.1.17.7.1.4.2.1.6,Q-BRIDGE-MIB::dot1qVlanStatus,INTEGER,read-only,,current,other(1):permanent(2):dynamicGvrp(3),This object indicates the status of this entry. other(1) - this entry is currently in use, but the conditions under which it will remain so differ from the following values. permanent(2) - this entry, corresponding to an entry in dot1qVlanStaticTable, is currently in use and will remain so after the next reset of the device. The port lists for this entry include ports from the equivalent dot1qVlanStaticTable entry and ports learned dynamically. dynamicGvrp(3) - this entry is currently in use and will remain so until removed by GVRP. There is no static entry for this VLAN, and it will be removed when the last port leaves the VLAN.
.1.3.6.1.2.1.17.7.1.4.2.1.7,Q-BRIDGE-MIB::dot1qVlanCreationTime,TimeTicks,read-only,,current,,The value of sysUpTime when this VLAN was created.
.1.3.6.1.2.1.17.7.1.4.3,Q-BRIDGE-MIB::dot1qVlanStaticTable,,not-accessible,,current,,A table containing static configuration information for each VLAN configured into the device by (local or network) management. All entries are permanent and will be restored after the device is reset.
.1.3.6.1.2.1.17.7.1.4.3.1,Q-BRIDGE-MIB::dot1qVlanStaticEntry,,not-accessible,dot1qVlanIndex,current,,Static information for a VLAN configured into the device by (local or network) management.
.1.3.6.1.2.1.17.7.1.4.3.1.1,Q-BRIDGE-MIB::dot1qVlanStaticName,OCTET,read-create,,current,,An administratively assigned string, which may be used to identify the VLAN.
.1.3.6.1.2.1.17.7.1.4.3.1.2,Q-BRIDGE-MIB::dot1qVlanStaticEgressPorts,OCTET,read-create,,current,,The set of ports that are permanently assigned to the egress list for this VLAN by management. Changes to a bit in this object affect the per-port, per-VLAN Registrar control for Registration Fixed for the relevant GVRP state machine on each port. A port may not be added in this set if it is already a member of the set of ports in dot1qVlanForbiddenEgressPorts. The default value of this object is a string of zeros of appropriate length, indicating not fixed.
.1.3.6.1.2.1.17.7.1.4.3.1.3,Q-BRIDGE-MIB::dot1qVlanForbiddenEgressPorts,OCTET,read-create,,current,,The set of ports that are prohibited by management from being included in the egress list for this VLAN. Changes to this object that cause a port to be included or excluded affect the per-port, per-VLAN Registrar control for Registration Forbidden for the relevant GVRP state machine on each port. A port may not be added in this set if it is already a member of the set of ports in dot1qVlanStaticEgressPorts. The default value of this object is a string of zeros of appropriate length, excluding all ports from the forbidden set.
.1.3.6.1.2.1.17.7.1.4.3.1.4,Q-BRIDGE-MIB::dot1qVlanStaticUntaggedPorts,OCTET,read-create,,current,,The set of ports that should transmit egress packets for this VLAN as untagged. The default value of this object for the default VLAN (dot1qVlanIndex = 1) is a string of appropriate length including all ports. There is no specified default for other VLANs. If a device agent cannot support the set of ports being set, then it will reject the set operation with an error. For example, a manager might attempt to set more than one VLAN to be untagged on egress where the device does not support this IEEE 802.1Q option.
.1.3.6.1.2.1.17.7.1.4.3.1.5,Q-BRIDGE-MIB::dot1qVlanStaticRowStatus,INTEGER,read-create,,current,active(1):notInService(2):notReady(3):createAndGo(4):createAndWait(5):destroy(6),This object indicates the status of this entry.
.1.3.6.1.2.1.17.7.1.4.4,Q-BRIDGE-MIB::dot1qNextFreeLocalVlanIndex,Integer32,read-only,,current,,The next available value for dot1qVlanIndex of a local VLAN entry in dot1qVlanStaticTable. This will report values >=4096 if a new Local VLAN may be created or else the value 0 if this is not possible. A row creation operation in this table for an entry with a local VlanIndex value may fail if the current value of this object is not used as the index. Even if the value read is used, there is no guarantee that it will still be the valid index when the create operation is attempted; another manager may have already got in during the intervening time interval. In this case, dot1qNextFreeLocalVlanIndex should be re-read and the creation re-tried with the new value. This value will automatically change when the current value is used to create a new row.
.1.3.6.1.2.1.17.7.1.4.5,Q-BRIDGE-MIB::dot1qPortVlanTable,,not-accessible,,current,,A table containing per-port control and status information for VLAN configuration in the device.
.1.3.6.1.2.1.17.7.1.4.5.1,Q-BRIDGE-MIB::dot1qPortVlanEntry,,not-accessible,,current,,Information controlling VLAN configuration for a port on the device. This is indexed by dot1dBasePort.
.1.3.6.1.2.1.17.7.1.4.5.1.1,Q-BRIDGE-MIB::dot1qPvid,Unsigned32,read-write,,current,,The PVID, the VLAN-ID assigned to untagged frames or Priority-Tagged frames received on this port. The value of this object MUST be retained across reinitializations of the management system.
.1.3.6.1.2.1.17.7.1.4.5.1.2,Q-BRIDGE-MIB::dot1qPortAcceptableFrameTypes,INTEGER,read-write,,current,admitAll(1):admitOnlyVlanTagged(2),When this is admitOnlyVlanTagged(2), the device will discard untagged frames or Priority-Tagged frames received on this port. When admitAll(1), untagged frames or Priority-Tagged frames received on this port will be accepted and assigned to a VID based on the PVID and VID Set for this port. This control does not affect VLAN-independent Bridge Protocol Data Unit (BPDU) frames, such as GVRP and Spanning Tree Protocol (STP). It does affect VLAN- dependent BPDU frames, such as GMRP. The value of this object MUST be retained across reinitializations of the management system.
.1.3.6.1.2.1.17.7.1.4.5.1.3,Q-BRIDGE-MIB::dot1qPortIngressFiltering,INTEGER,read-write,,current,true(1):false(2),When this is true(1), the device will discard incoming frames for VLANs that do not include this Port in its Member set. When false(2), the port will accept all incoming frames. This control does not affect VLAN-independent BPDU frames, such as GVRP and STP. It does affect VLAN- dependent BPDU frames, such as GMRP. The value of this object MUST be retained across reinitializations of the management system.
.1.3.6.1.2.1.17.7.1.4.5.1.4,Q-BRIDGE-MIB::dot1qPortGvrpStatus,INTEGER,read-write,,current,enabled(1):disabled(2),The state of GVRP operation on this port. The value enabled(1) indicates that GVRP is enabled on this port, as long as dot1qGvrpStatus is also enabled for this device. When disabled(2) but dot1qGvrpStatus is still enabled for the device, GVRP is disabled on this port: any GVRP packets received will be silently discarded, and no GVRP registrations will be propagated from other ports. This object affects all GVRP Applicant and Registrar state machines on this port. A transition from disabled(2) to enabled(1) will cause a reset of all GVRP state machines on this port. The value of this object MUST be retained across reinitializations of the management system.
.1.3.6.1.2.1.17.7.1.4.5.1.5,Q-BRIDGE-MIB::dot1qPortGvrpFailedRegistrations,Counter32,read-only,,current,,The total number of failed GVRP registrations, for any reason, on this port.
.1.3.6.1.2.1.17.7.1.4.5.1.6,Q-BRIDGE-MIB::dot1qPortGvrpLastPduOrigin,OCTET,read-only,,current,,The Source MAC Address of the last GVRP message received on this port.
.1.3.6.1.2.1.17.7.1.4.5.1.7,Q-BRIDGE-MIB::dot1qPortRestrictedVlanRegistration,INTEGER,read-write,,current,true(1):false(2),The state of Restricted VLAN Registration on this port. If the value of this control is true(1), then creation of a new dynamic VLAN entry is permitted only if there is a Static VLAN Registration Entry for the VLAN concerned, in which the Registrar Administrative Control value for this port is Normal Registration. The value of this object MUST be retained across reinitializations of the management system.
.1.3.6.1.2.1.17.7.1.4.6,Q-BRIDGE-MIB::dot1qPortVlanStatisticsTable,,not-accessible,,current,,A table containing per-port, per-VLAN statistics for traffic received. Separate objects are provided for both the most-significant and least-significant bits of statistics counters for ports that are associated with this transparent bridge. The most-significant bit objects are only required on high-capacity interfaces, as defined in the conformance clauses for these objects. This mechanism is provided as a way to read 64-bit counters for agents that support only SNMPv1. Note that the reporting of most-significant and least- significant counter bits separately runs the risk of missing an overflow of the lower bits in the interval between sampling. The manager must be aware of this possibility, even within the same varbindlist, when interpreting the results of a request or asynchronous notification.
.1.3.6.1.2.1.17.7.1.4.6.1,Q-BRIDGE-MIB::dot1qPortVlanStatisticsEntry,,not-accessible,dot1dBasePort:dot1qVlanIndex,current,,Traffic statistics for a VLAN on an interface.
.1.3.6.1.2.1.17.7.1.4.6.1.1,Q-BRIDGE-MIB::dot1qTpVlanPortInFrames,Counter32,read-only,,current,,The number of valid frames received by this port from its segment that were classified as belonging to this VLAN. Note that a frame received on this port is counted by this object if and only if it is for a protocol being processed by the local forwarding process for this VLAN. This object includes received bridge management frames classified as belonging to this VLAN (e.g., GMRP, but not GVRP or STP.
.1.3.6.1.2.1.17.7.1.4.6.1.2,Q-BRIDGE-MIB::dot1qTpVlanPortOutFrames,Counter32,read-only,,current,,The number of valid frames transmitted by this port to its segment from the local forwarding process for this VLAN. This includes bridge management frames originated by this device that are classified as belonging to this VLAN (e.g., GMRP, but not GVRP or STP).
.1.3.6.1.2.1.17.7.1.4.6.1.3,Q-BRIDGE-MIB::dot1qTpVlanPortInDiscards,Counter32,read-only,,current,,The number of valid frames received by this port from its segment that were classified as belonging to this VLAN and that were discarded due to VLAN-related reasons. Specifically, the IEEE 802.1Q counters for Discard Inbound and Discard on Ingress Filtering.
.1.3.6.1.2.1.17.7.1.4.6.1.4,Q-BRIDGE-MIB::dot1qTpVlanPortInOverflowFrames,Counter32,read-only,,current,,The number of times the associated dot1qTpVlanPortInFrames counter has overflowed.
.1.3.6.1.2.1.17.7.1.4.6.1.5,Q-BRIDGE-MIB::dot1qTpVlanPortOutOverflowFrames,Counter32,read-only,,current,,The number of times the associated dot1qTpVlanPortOutFrames counter has overflowed.
.1.3.6.1.2.1.17.7.1.4.6.1.6,Q-BRIDGE-MIB::dot1qTpVlanPortInOverflowDiscards,Counter32,read-only,,current,,The number of times the associated dot1qTpVlanPortInDiscards counter has overflowed.
.1.3.6.1.2.1.17.7.1.4.7,Q-BRIDGE-MIB::dot1qPortVlanHCStatisticsTable,,not-accessible,,current,,A table containing per-port, per-VLAN statistics for traffic on high-capacity interfaces.
.1.3.6.1.2.1.17.7.1.4.7.1,Q-BRIDGE-MIB::dot1qPortVlanHCStatisticsEntry,,not-accessible,dot1dBasePort:dot1qVlanIndex,current,,Traffic statistics for a VLAN on a high-capacity interface.
.1.3.6.1.2.1.17.7.1.4.7.1.1,Q-BRIDGE-MIB::dot1qTpVlanPortHCInFrames,Counter64,read-only,,current,,The number of valid frames received by this port from its segment that were classified as belonging to this VLAN. Note that a frame received on this port is counted by this object if and only if it is for a protocol being processed by the local forwarding process for this VLAN. This object includes received bridge management frames classified as belonging to this VLAN (e.g., GMRP, but not GVRP or STP).
.1.3.6.1.2.1.17.7.1.4.7.1.2,Q-BRIDGE-MIB::dot1qTpVlanPortHCOutFrames,Counter64,read-only,,current,,The number of valid frames transmitted by this port to its segment from the local forwarding process for this VLAN. This includes bridge management frames originated by this device that are classified as belonging to this VLAN (e.g., GMRP, but not GVRP or STP).
.1.3.6.1.2.1.17.7.1.4.7.1.3,Q-BRIDGE-MIB::dot1qTpVlanPortHCInDiscards,Counter64,read-only,,current,,The number of valid frames received by this port from its segment that were classified as belonging to this VLAN and that were discarded due to VLAN-related reasons. Specifically, the IEEE 802.1Q counters for Discard Inbound and Discard on Ingress Filtering.
.1.3.6.1.2.1.17.7.1.4.8,Q-BRIDGE-MIB::dot1qLearningConstraintsTable,,not-accessible,,current,,A table containing learning constraints for sets of Shared and Independent VLANs.
.1.3.6.1.2.1.17.7.1.4.8.1,Q-BRIDGE-MIB::dot1qLearningConstraintsEntry,,not-accessible,dot1qConstraintVlan:dot1qConstraintSet,current,,A learning constraint defined for a VLAN.
.1.3.6.1.2.1.17.7.1.4.8.1.1,Q-BRIDGE-MIB::dot1qConstraintVlan,Unsigned32,not-accessible,,current,,The index of the row in dot1qVlanCurrentTable for the VLAN constrained by this entry.
.1.3.6.1.2.1.17.7.1.4.8.1.2,Q-BRIDGE-MIB::dot1qConstraintSet,Integer32,not-accessible,,current,,The identity of the constraint set to which dot1qConstraintVlan belongs. These values may be chosen by the management station.
.1.3.6.1.2.1.17.7.1.4.8.1.3,Q-BRIDGE-MIB::dot1qConstraintType,INTEGER,read-create,,current,independent(1):shared(2),The type of constraint this entry defines. independent(1) - the VLAN, dot1qConstraintVlan, uses a filtering database independent from all other VLANs in the same set, defined by dot1qConstraintSet. shared(2) - the VLAN, dot1qConstraintVlan, shares the same filtering database as all other VLANs in the same set, defined by dot1qConstraintSet.
.1.3.6.1.2.1.17.7.1.4.8.1.4,Q-BRIDGE-MIB::dot1qConstraintStatus,INTEGER,read-create,,current,active(1):notInService(2):notReady(3):createAndGo(4):createAndWait(5):destroy(6),The status of this entry.
.1.3.6.1.2.1.17.7.1.4.9,Q-BRIDGE-MIB::dot1qConstraintSetDefault,Integer32,read-write,,current,,The identity of the constraint set to which a VLAN belongs, if there is not an explicit entry for that VLAN in dot1qLearningConstraintsTable. The value of this object MUST be retained across reinitializations of the management system.
.1.3.6.1.2.1.17.7.1.4.10,Q-BRIDGE-MIB::dot1qConstraintTypeDefault,INTEGER,read-write,,current,independent(1):shared(2),The type of constraint set to which a VLAN belongs, if there is not an explicit entry for that VLAN in dot1qLearningConstraintsTable. The types are as defined for dot1qConstraintType. The value of this object MUST be retained across reinitializations of the management system.
.1.3.6.1.2.1.17.7.1.5,Q-BRIDGE-MIB::dot1vProtocol,,,,,,
.1.3.6.1.2.1.17.7.1.5.1,Q-BRIDGE-MIB::dot1vProtocolGroupTable,,not-accessible,,current,,A table that contains mappings from Protocol Templates to Protocol Group Identifiers used for Port-and-Protocol-based VLAN Classification.
.1.3.6.1.2.1.17.7.1.5.1.1,Q-BRIDGE-MIB::dot1vProtocolGroupEntry,,not-accessible,dot1vProtocolTemplateFrameType:dot1vProtocolTemplateProtocolValue,current,,A mapping from a Protocol Template to a Protocol Group Identifier.
.1.3.6.1.2.1.17.7.1.5.1.1.1,Q-BRIDGE-MIB::dot1vProtocolTemplateFrameType,INTEGER,not-accessible,,current,ethernet(1):rfc1042(2):snap8021H(3):snapOther(4):llcOther(5),The data-link encapsulation format or the 'detagged_frame_type' in a Protocol Template.
.1.3.6.1.2.1.17.7.1.5.1.1.2,Q-BRIDGE-MIB::dot1vProtocolTemplateProtocolValue,OCTET,not-accessible,,current,,The identification of the protocol above the data-link layer in a Protocol Template. Depending on the frame type, the octet string will have one of the following values: For 'ethernet', 'rfc1042' and 'snap8021H', this is the 16-bit (2-octet) IEEE 802.3 Type Field. For 'snapOther', this is the 40-bit (5-octet) PID. For 'llcOther', this is the 2-octet IEEE 802.2 Link Service Access Point (LSAP) pair: first octet for Destination Service Access Point (DSAP) and second octet for Source Service Access Point (SSAP).
.1.3.6.1.2.1.17.7.1.5.1.1.3,Q-BRIDGE-MIB::dot1vProtocolGroupId,Integer32,read-create,,current,,Represents a group of protocols that are associated together when assigning a VID to a frame.
.1.3.6.1.2.1.17.7.1.5.1.1.4,Q-BRIDGE-MIB::dot1vProtocolGroupRowStatus,INTEGER,read-create,,current,active(1):notInService(2):notReady(3):createAndGo(4):createAndWait(5):destroy(6),This object indicates the status of this entry.
.1.3.6.1.2.1.17.7.1.5.2,Q-BRIDGE-MIB::dot1vProtocolPortTable,,not-accessible,,current,,A table that contains VID sets used for Port-and-Protocol-based VLAN Classification.
.1.3.6.1.2.1.17.7.1.5.2.1,Q-BRIDGE-MIB::dot1vProtocolPortEntry,,not-accessible,dot1dBasePort:dot1vProtocolPortGroupId,current,,A VID set for a port.
.1.3.6.1.2.1.17.7.1.5.2.1.1,Q-BRIDGE-MIB::dot1vProtocolPortGroupId,Integer32,not-accessible,,current,,Designates a group of protocols in the Protocol Group Database.
.1.3.6.1.2.1.17.7.1.5.2.1.2,Q-BRIDGE-MIB::dot1vProtocolPortGroupVid,Integer32,read-create,,current,,The VID associated with a group of protocols for each port.
.1.3.6.1.2.1.17.7.1.5.2.1.3,Q-BRIDGE-MIB::dot1vProtocolPortRowStatus,INTEGER,read-create,,current,active(1):notInService(2):notReady(3):createAndGo(4):createAndWait(5):destroy(6),This object indicates the status of this entry.
.1.3.6.1.2.1.17.7.2,Q-BRIDGE-MIB::qBridgeConformance,,,,,,
.1.3.6.1.2.1.17.7.2.1,Q-BRIDGE-MIB::qBridgeGroups,,,,,,
.1.3.6.1.2.1.17.7.2.1.1,Q-BRIDGE-MIB::qBridgeBaseGroup,,,,,,A collection of objects providing device-level control and status information for the Virtual LAN bridge services.
.1.3.6.1.2.1.17.7.2.1.2,Q-BRIDGE-MIB::qBridgeFdbUnicastGroup,,,,,,A collection of objects providing information about all unicast addresses, learned dynamically or statically configured by management, in each Filtering Database.
.1.3.6.1.2.1.17.7.2.1.3,Q-BRIDGE-MIB::qBridgeFdbMulticastGroup,,,,,,A collection of objects providing information about all multicast addresses, learned dynamically or statically configured by management, in each Filtering Database.
.1.3.6.1.2.1.17.7.2.1.4,Q-BRIDGE-MIB::qBridgeServiceRequirementsGroup,,,,,,A collection of objects providing information about service requirements, learned dynamically or statically configured by management, in each Filtering Database.
.1.3.6.1.2.1.17.7.2.1.5,Q-BRIDGE-MIB::qBridgeFdbStaticGroup,,,,,,A collection of objects providing information about unicast and multicast addresses statically configured by management, in each Filtering Database or VLAN.
.1.3.6.1.2.1.17.7.2.1.6,Q-BRIDGE-MIB::qBridgeVlanGroup,,,,,,A collection of objects providing information about all VLANs currently configured on this device.
.1.3.6.1.2.1.17.7.2.1.7,Q-BRIDGE-MIB::qBridgeVlanStaticGroup,,,,,,A collection of objects providing information about VLANs statically configured by management.
.1.3.6.1.2.1.17.7.2.1.8,Q-BRIDGE-MIB::qBridgePortGroup,,,,,,A collection of objects providing port-level VLAN control and status information for all ports.
.1.3.6.1.2.1.17.7.2.1.9,Q-BRIDGE-MIB::qBridgeVlanStatisticsGroup,,,,,,A collection of objects providing per-port packet statistics for all VLANs currently configured on this device.
.1.3.6.1.2.1.17.7.2.1.10,Q-BRIDGE-MIB::qBridgeVlanStatisticsOverflowGroup,,,,,,A collection of objects providing overflow counters for per-port packet statistics for all VLANs currently configured on this device for high-capacity interfaces, defined as those that have the value of the corresponding instance of ifSpeed greater than 650,000,000 bits/second.
.1.3.6.1.2.1.17.7.2.1.11,Q-BRIDGE-MIB::qBridgeVlanHCStatisticsGroup,,,,,,A collection of objects providing per-port packet statistics for all VLANs currently configured on this device for high-capacity interfaces, defined as those that have the value of the corresponding instance of ifSpeed greater than 650,000,000 bits/second.
.1.3.6.1.2.1.17.7.2.1.12,Q-BRIDGE-MIB::qBridgeLearningConstraintsGroup,,,,,,A collection of objects defining the Filtering Database constraints all VLANs have with each other.
.1.3.6.1.2.1.17.7.2.1.13,Q-BRIDGE-MIB::qBridgeLearningConstraintDefaultGroup,,,,,,A collection of objects defining the default Filtering Database constraints for VLANs that have no specific constraints defined.
.1.3.6.1.2.1.17.7.2.1.14,Q-BRIDGE-MIB::qBridgeClassificationDeviceGroup,,,,,,VLAN classification information for the bridge.
.1.3.6.1.2.1.17.7.2.1.15,Q-BRIDGE-MIB::qBridgeClassificationPortGroup,,,,,,VLAN classification information for individual ports.
.1.3.6.1.2.1.17.7.2.1.16,Q-BRIDGE-MIB::qBridgePortGroup2,,,,,,A collection of objects providing port-level VLAN control and status information for all ports.
.1.3.6.1.2.1.17.7.2.2,Q-BRIDGE-MIB::qBridgeCompliances,,,,,,
.1.3.6.1.2.1.17.7.2.2.1,Q-BRIDGE-MIB::qBridgeCompliance,,,,,,The compliance statement for device support of Virtual LAN Bridge services. RFC2674 was silent about the expected persistence of the read-write objects in this MIB module. Applications MUST NOT assume that the values of the read-write objects are persistent across reinitializations of the management system and MUST NOT assume that the values are not persistent across reinitializations of the management system.
.1.3.6.1.2.1.17.7.2.2.2,Q-BRIDGE-MIB::qBridgeCompliance2,,,,,,The compliance statement for device support of Virtual LAN Bridge services. This document clarifies the persistence requirements for the read-write objects in this MIB module. All implementations claiming compliance to qBridgeCompliance2 MUST retain the values of those read-write objects that specify this requirement.
.1.3.6.1.2.1.17.8,BRIDGE-MIB::dot1dConformance,,,,,,
.1.3.6.1.2.1.17.8.1,BRIDGE-MIB::dot1dGroups,,,,,,
.1.3.6.1.2.1.17.8.1.1,BRIDGE-MIB::dot1dBaseBridgeGroup,,,,,,Bridge level information for this device.
.1.3.6.1.2.1.17.8.1.2,BRIDGE-MIB::dot1dBasePortGroup,,,,,,Information for each port on this device.
.1.3.6.1.2.1.17.8.1.3,BRIDGE-MIB::dot1dStpBridgeGroup,,,,,,Bridge level Spanning Tree data for this device.
.1.3.6.1.2.1.17.8.1.4,BRIDGE-MIB::dot1dStpPortGroup,,,,,,Spanning Tree data for each port on this device.
.1.3.6.1.2.1.17.8.1.5,BRIDGE-MIB::dot1dStpPortGroup2,,,,,,Spanning Tree data for each port on this device.
.1.3.6.1.2.1.17.8.1.6,BRIDGE-MIB::dot1dStpPortGroup3,,,,,,Spanning Tree data for devices supporting 32-bit path costs.
.1.3.6.1.2.1.17.8.1.7,BRIDGE-MIB::dot1dTpBridgeGroup,,,,,,Bridge level Transparent Bridging data.
.1.3.6.1.2.1.17.8.1.8,BRIDGE-MIB::dot1dTpFdbGroup,,,,,,Filtering Database information for the Bridge.
.1.3.6.1.2.1.17.8.1.9,BRIDGE-MIB::dot1dTpGroup,,,,,,Dynamic Filtering Database information for each port of the Bridge.
.1.3.6.1.2.1.17.8.1.10,BRIDGE-MIB::dot1dStaticGroup,,,,,,Static Filtering Database information for each port of the Bridge.
.1.3.6.1.2.1.17.8.1.11,BRIDGE-MIB::dot1dNotificationGroup,,,,,,Group of objects describing notifications (traps).
.1.3.6.1.2.1.17.8.2,BRIDGE-MIB::dot1dCompliances,,,,,,
.1.3.6.1.2.1.17.8.2.1,BRIDGE-MIB::bridgeCompliance1493,,,,,,The compliance statement for device support of bridging services, as per RFC1493.
.1.3.6.1.2.1.17.8.2.2,BRIDGE-MIB::bridgeCompliance4188,,,,,,The compliance statement for device support of bridging services. This supports 32-bit Path Cost values and the more restricted bridge and port priorities, as per IEEE 802.1t. Full support for the 802.1D management objects requires that the SNMPv2-MIB [RFC3418] objects sysDescr, and sysUpTime, as well as the IF-MIB [RFC2863] objects ifIndex, ifType, ifDescr, ifPhysAddress, and ifLastChange are implemented.
.1.3.6.1.2.1.22,SNMP-REPEATER-MIB::snmpDot3RptrMgt,,,,,,
.1.3.6.1.2.1.22.0,SNMP-REPEATER-MIB::anonymous#4,,,,,,
.1.3.6.1.2.1.22.0.1,SNMP-REPEATER-MIB::rptrHealth,,,,,,********* THIS OBJECT IS DEPRECATED ********** In a system containing a single managed repeater, the rptrHealth notification conveys information related to the operational status of the repeater. It is sent either when the value of rptrOperStatus changes, or upon completion of a non-disruptive test. The rptrHealth notification must contain the rptrOperStatus object. The agent may optionally include the rptrHealthText object in the varBind list. See the rptrOperStatus and rptrHealthText objects for descriptions of the information that is sent. The agent must throttle the generation of consecutive rptrHealth traps so that there is at least a five-second gap between traps of this type. When traps are throttled, they are dropped, not queued for sending at a future time. (Note that 'generating' a trap means sending to all configured recipients.)
.1.3.6.1.2.1.22.0.2,SNMP-REPEATER-MIB::rptrGroupChange,,,,,,********* THIS OBJECT IS DEPRECATED ********** In a system containing a single managed repeater, this notification is sent when a change occurs in the group structure of the repeater. This occurs only when a group is logically or physically removed from or added to a repeater. The varBind list contains the identifier of the group that was removed or added. The agent must throttle the generation of consecutive rptrGroupChange traps for the same group so that there is at least a five-second gap between traps of this type. When traps are throttled, they are dropped, not queued for sending at a future time. (Note that 'generating' a trap means sending to all configured recipients.)
.1.3.6.1.2.1.22.0.3,SNMP-REPEATER-MIB::rptrResetEvent,,,,,,********* THIS OBJECT IS DEPRECATED ********** In a system containing a single managed repeater-unit, the rptrResetEvent notification conveys information related to the operational status of the repeater. This trap is sent on completion of a repeater reset action. A repeater reset action is defined as an a transition to the START state of Fig 9-2 in section 9 [IEEE 802.3 Std], when triggered by a management command (e.g., an SNMP Set on the rptrReset object). The agent must throttle the generation of consecutive rptrResetEvent traps so that there is at least a five-second gap between traps of this type. When traps are throttled, they are dropped, not queued for sending at a future time. (Note that 'generating' a trap means sending to all configured recipients.) The rptrResetEvent trap is not sent when the agent restarts and sends an SNMP coldStart or warmStart trap. However, it is recommended that a repeater agent send the rptrOperStatus object as an optional object with its coldStart and warmStart trap PDUs. The rptrOperStatus object must be included in the varbind list sent with this trap. The agent may optionally include the rptrHealthText object as well.
.1.3.6.1.2.1.22.0.4,SNMP-REPEATER-MIB::rptrInfoHealth,,,,,,In a system containing multiple managed repeaters, the rptrInfoHealth notification conveys information related to the operational status of a repeater. It is sent either when the value of rptrInfoOperStatus changes, or upon completion of a non-disruptive test. The agent must throttle the generation of consecutive rptrInfoHealth notifications for the same repeater so that there is at least a five-second gap between notifications of this type. When notifications are throttled, they are dropped, not queued for sending at a future time. (Note that 'generating' a notification means sending to all configured recipients.)
.1.3.6.1.2.1.22.0.5,SNMP-REPEATER-MIB::rptrInfoResetEvent,,,,,,In a system containing multiple managed repeaters, the rptrInfoResetEvent notification conveys information related to the operational status of a repeater. This notification is sent on completion of a repeater reset action. A repeater reset action is defined as a transition to the START state of Fig 9-2 in section 9 of [IEEE 802.3 Std], when triggered by a management command (e.g., an SNMP Set on the rptrInfoReset object). The agent must throttle the generation of consecutive rptrInfoResetEvent notifications for a single repeater so that there is at least a five-second gap between notifications of this type. When notifications are throttled, they are dropped, not queued for sending at a future time. (Note that 'generating' a notification means sending to all configured recipients.) The rptrInfoResetEvent is not sent when the agent restarts and sends an SNMP coldStart or warmStart trap. However, it is recommended that a repeater agent send the rptrInfoOperStatus object as an optional object with its coldStart and warmStart trap PDUs.
.1.3.6.1.2.1.22.1,SNMP-REPEATER-MIB::rptrBasicPackage,,,,,,
.1.3.6.1.2.1.22.1.1,SNMP-REPEATER-MIB::rptrRptrInfo,,,,,,
.1.3.6.1.2.1.22.1.1.1,SNMP-REPEATER-MIB::rptrGroupCapacity,Integer32,read-only,,deprecated,,********* THIS OBJECT IS DEPRECATED ********** The rptrGroupCapacity is the number of groups that can be contained within the repeater. Within each managed repeater, the groups are uniquely numbered in the range from 1 to rptrGroupCapacity. Some groups may not be present in the repeater, in which case the actual number of groups present will be less than rptrGroupCapacity. The number of groups present will never be greater than rptrGroupCapacity. Note: In practice, this will generally be the number of field-replaceable units (i.e., modules, cards, or boards) that can fit in the physical repeater enclosure, and the group numbers will correspond to numbers marked on the physical enclosure.
.1.3.6.1.2.1.22.1.1.2,SNMP-REPEATER-MIB::rptrOperStatus,INTEGER,read-only,,deprecated,other(1):ok(2):rptrFailure(3):groupFailure(4):portFailure(5):generalFailure(6),********* THIS OBJECT IS DEPRECATED ********** The rptrOperStatus object indicates the operational state of the repeater. The rptrHealthText object may be consulted for more specific information about the state of the repeater's health. In the case of multiple kinds of failures (e.g., repeater failure and port failure), the value of this attribute shall reflect the highest priority failure in the following order, listed highest priority first: rptrFailure(3) groupFailure(4) portFailure(5) generalFailure(6).
.1.3.6.1.2.1.22.1.1.3,SNMP-REPEATER-MIB::rptrHealthText,OCTET,read-only,,deprecated,,********* THIS OBJECT IS DEPRECATED ********** The health text object is a text string that provides information relevant to the operational state of the repeater. Agents may use this string to provide detailed information on current failures, including how they were detected, and/or instructions for problem resolution. The contents are agent-specific.
.1.3.6.1.2.1.22.1.1.4,SNMP-REPEATER-MIB::rptrReset,INTEGER,read-write,,deprecated,noReset(1):reset(2),********* THIS OBJECT IS DEPRECATED ********** Setting this object to reset(2) causes a transition to the START state of Fig 9-2 in section 9 [IEEE 802.3 Std] for a 10Mb/s repeater, and the START state of Fig 27-2 in section 27 of that standard for a 100Mb/s repeater. Setting this object to noReset(1) has no effect. The agent will always return the value noReset(1) when this object is read. After receiving a request to set this variable to reset(2), the agent is allowed to delay the reset for a short period. For example, the implementor may choose to delay the reset long enough to allow the SNMP response to be transmitted. In any event, the SNMP response must be transmitted. This action does not reset the management counters defined in this document nor does it affect the portAdminStatus parameters. Included in this action is the execution of a disruptive Self-Test with the following characteristics: a) The nature of the tests is not specified. b) The test resets the repeater but without affecting management information about the repeater. c) The test does not inject packets onto any segment. d) Packets received during the test may or may not be transferred. e) The test does not interfere with management functions. After performing this self-test, the agent will update the repeater health information (including rptrOperStatus and rptrHealthText), and send a rptrHealth trap.
.1.3.6.1.2.1.22.1.1.5,SNMP-REPEATER-MIB::rptrNonDisruptTest,INTEGER,read-write,,deprecated,noSelfTest(1):selfTest(2),********* THIS OBJECT IS DEPRECATED ********** Setting this object to selfTest(2) causes the repeater to perform a agent-specific, non- disruptive self-test that has the following characteristics: a) The nature of the tests is not specified. b) The test does not change the state of the repeater or management information about the repeater. c) The test does not inject packets onto any segment. d) The test does not prevent the relay of any packets. e) The test does not interfere with management functions. After performing this test, the agent will update the repeater health information (including rptrOperStatus and rptrHealthText) and send a rptrHealth trap. Note that this definition allows returning an 'okay' result after doing a trivial test. Setting this object to noSelfTest(1) has no effect. The agent will always return the value noSelfTest(1) when this object is read.
.1.3.6.1.2.1.22.1.1.6,SNMP-REPEATER-MIB::rptrTotalPartitionedPorts,Gauge32,read-only,,deprecated,,********* THIS OBJECT IS DEPRECATED ********** This object returns the total number of ports in the repeater whose current state meets all three of the following criteria: rptrPortOperStatus does not have the value notPresent(3), rptrPortAdminStatus is enabled(1), and rptrPortAutoPartitionState is autoPartitioned(2).
.1.3.6.1.2.1.22.1.2,SNMP-REPEATER-MIB::rptrGroupInfo,,,,,,
.1.3.6.1.2.1.22.1.2.1,SNMP-REPEATER-MIB::rptrGroupTable,,not-accessible,,current,,Table of descriptive and status information about the groups of ports.
.1.3.6.1.2.1.22.1.2.1.1,SNMP-REPEATER-MIB::rptrGroupEntry,,not-accessible,rptrGroupIndex,current,,An entry in the table, containing information about a single group of ports.
.1.3.6.1.2.1.22.1.2.1.1.1,SNMP-REPEATER-MIB::rptrGroupIndex,Integer32,read-only,,current,,This object identifies the group within the system for which this entry contains information.
.1.3.6.1.2.1.22.1.2.1.1.2,SNMP-REPEATER-MIB::rptrGroupDescr,OCTET,read-only,,deprecated,,********* THIS OBJECT IS DEPRECATED ********** A textual description of the group. This value should include the full name and version identification of the group's hardware type and indicate how the group is differentiated from other types of groups in the repeater. Plug-in Module, Rev A' or 'Barney Rubble 10BASE-T 4-port SIMM socket Version 2.1' are examples of valid group descriptions. It is mandatory that this only contain printable ASCII characters.
.1.3.6.1.2.1.22.1.2.1.1.3,SNMP-REPEATER-MIB::rptrGroupObjectID,OBJECT,read-only,,current,,The vendor's authoritative identification of the group. This value may be allocated within the SMI enterprises subtree (1.3.6.1.4.1) and provides a straight-forward and unambiguous means for determining what kind of group is being managed. For example, this object could take the value 1.3.6.1.4.1.4242.1.2.14 if vendor 'Flintstones, Inc.' was assigned the subtree 1.3.6.1.4.1.4242, and had assigned the identifier 1.3.6.1.4.1.4242.1.2.14 to its 'Wilma Flintstone 6-Port FOIRL Plug-in Module.'
.1.3.6.1.2.1.22.1.2.1.1.4,SNMP-REPEATER-MIB::rptrGroupOperStatus,INTEGER,read-only,,current,other(1):operational(2):malfunctioning(3):notPresent(4):underTest(5):resetInProgress(6),An object that indicates the operational status of the group. A status of notPresent(4) indicates that the group is temporarily or permanently physically and/or logically not a part of the repeater. It is an implementation-specific matter as to whether the agent effectively removes notPresent entries from the table. A status of operational(2) indicates that the group is functioning, and a status of malfunctioning(3) indicates that the group is malfunctioning in some way.
.1.3.6.1.2.1.22.1.2.1.1.5,SNMP-REPEATER-MIB::rptrGroupLastOperStatusChange,TimeTicks,read-only,,deprecated,,********* THIS OBJECT IS DEPRECATED ********** An object that contains the value of sysUpTime at the time when the last of the following occurred: 1) the agent cold- or warm-started; 2) the row for the group was created (such as when the group was added to the system); or 3) the value of rptrGroupOperStatus for the group changed. A value of zero indicates that the group's operational status has not changed since the agent last restarted.
.1.3.6.1.2.1.22.1.2.1.1.6,SNMP-REPEATER-MIB::rptrGroupPortCapacity,Integer32,read-only,,current,,The rptrGroupPortCapacity is the number of ports that can be contained within the group. Valid range is 1-2147483647. Within each group, the ports are uniquely numbered in the range from 1 to rptrGroupPortCapacity. Some ports may not be present in the system, in which case the actual number of ports present will be less than the value of rptrGroupPortCapacity. The number of ports present in the group will never be greater than the value of rptrGroupPortCapacity. Note: In practice, this will generally be the number of ports on a module, card, or board, and the port numbers will correspond to numbers marked on the physical embodiment.
.1.3.6.1.2.1.22.1.3,SNMP-REPEATER-MIB::rptrPortInfo,,,,,,
.1.3.6.1.2.1.22.1.3.1,SNMP-REPEATER-MIB::rptrPortTable,,not-accessible,,current,,Table of descriptive and status information about the repeater ports in the system. The number of entries is independent of the number of repeaters in the managed system.
.1.3.6.1.2.1.22.1.3.1.1,SNMP-REPEATER-MIB::rptrPortEntry,,not-accessible,rptrPortGroupIndex:rptrPortIndex,current,,An entry in the table, containing information about a single port.
.1.3.6.1.2.1.22.1.3.1.1.1,SNMP-REPEATER-MIB::rptrPortGroupIndex,Integer32,read-only,,current,,This object identifies the group containing the port for which this entry contains information.
.1.3.6.1.2.1.22.1.3.1.1.2,SNMP-REPEATER-MIB::rptrPortIndex,Integer32,read-only,,current,,This object identifies the port within the group for which this entry contains information. This identifies the port independently from the repeater it may be attached to. The numbering scheme for ports is implementation specific; however, this value can never be greater than rptrGroupPortCapacity for the associated group.
.1.3.6.1.2.1.22.1.3.1.1.3,SNMP-REPEATER-MIB::rptrPortAdminStatus,INTEGER,read-write,,current,enabled(1):disabled(2),Setting this object to disabled(2) disables the port. A disabled port neither transmits nor receives. Once disabled, a port must be explicitly enabled to restore operation. A port which is disabled when power is lost or when a reset is exerted shall remain disabled when normal operation resumes. The admin status takes precedence over auto- partition and functionally operates between the auto-partition mechanism and the AUI/PMA. Setting this object to enabled(1) enables the port and exerts a BEGIN on the port's auto-partition state machine. (In effect, when a port is disabled, the value of rptrPortAutoPartitionState for that port is frozen until the port is next enabled. When the port becomes enabled, the rptrPortAutoPartitionState becomes notAutoPartitioned(1), regardless of its pre-disabling state.)
.1.3.6.1.2.1.22.1.3.1.1.4,SNMP-REPEATER-MIB::rptrPortAutoPartitionState,INTEGER,read-only,,current,notAutoPartitioned(1):autoPartitioned(2),The autoPartitionState flag indicates whether the port is currently partitioned by the repeater's auto-partition protection. The conditions that cause port partitioning are specified in partition state machine in Sections 9 and 27 of [IEEE 802.3 Std]. They are not differentiated here.
.1.3.6.1.2.1.22.1.3.1.1.5,SNMP-REPEATER-MIB::rptrPortOperStatus,INTEGER,read-only,,current,operational(1):notOperational(2):notPresent(3),This object indicates the port's operational status. The notPresent(3) status indicates the port is physically removed (note this may or may not be possible depending on the type of port.) The operational(1) status indicates that the port is enabled (see rptrPortAdminStatus) and working, even though it might be auto-partitioned (see rptrPortAutoPartitionState). If this object has the value operational(1) and rptrPortAdminStatus is set to disabled(2), it is expected that this object's value will soon change to notOperational(2).
.1.3.6.1.2.1.22.1.3.1.1.6,SNMP-REPEATER-MIB::rptrPortRptrId,Integer32,read-only,,current,,This object identifies the repeater to which this port belongs. The repeater identified by a particular value of this object is the same as that identified by the same value of rptrInfoId. A value of zero indicates that this port currently is not a member of any repeater.
.1.3.6.1.2.1.22.1.4,SNMP-REPEATER-MIB::rptrAllRptrInfo,,,,,,
.1.3.6.1.2.1.22.1.4.1,SNMP-REPEATER-MIB::rptrInfoTable,,not-accessible,,current,,A table of information about each non-trivial repeater. The number of entries depends on the physical configuration of the managed system.
.1.3.6.1.2.1.22.1.4.1.1,SNMP-REPEATER-MIB::rptrInfoEntry,,not-accessible,rptrInfoId,current,,An entry in the table, containing information about a single non-trivial repeater.
.1.3.6.1.2.1.22.1.4.1.1.1,SNMP-REPEATER-MIB::rptrInfoId,Integer32,read-only,,current,,This object identifies the repeater for which this entry contains information.
.1.3.6.1.2.1.22.1.4.1.1.2,SNMP-REPEATER-MIB::rptrInfoRptrType,INTEGER,read-only,,current,other(1):tenMb(2):onehundredMbClassI(3):onehundredMbClassII(4),The rptrInfoRptrType returns a value that identifies the CSMA/CD repeater type.
.1.3.6.1.2.1.22.1.4.1.1.3,SNMP-REPEATER-MIB::rptrInfoOperStatus,INTEGER,read-only,,current,other(1):ok(2):failure(3),The rptrInfoOperStatus object indicates the operational state of the repeater.
.1.3.6.1.2.1.22.1.4.1.1.4,SNMP-REPEATER-MIB::rptrInfoReset,INTEGER,read-write,,current,noReset(1):reset(2),Setting this object to reset(2) causes a transition to the START state of Fig 9-2 in section 9 [IEEE 802.3 Std] for a 10Mb/s repeater, and to the START state of Fig 27-2 in section 27 of that standard for a 100Mb/s repeater. Setting this object to noReset(1) has no effect. The agent will always return the value noReset(1) when this object is read. After receiving a request to set this variable to reset(2), the agent is allowed to delay the reset for a short period. For example, the implementor may choose to delay the reset long enough to allow the SNMP response to be transmitted. In any event, the SNMP response must be transmitted. This action does not reset the management counters defined in this document nor does it affect the portAdminStatus parameters. Included in this action is the execution of a disruptive Self-Test with the following characteristics: a) The nature of the tests is not specified. b) The test resets the repeater but without affecting management information about the repeater. c) The test does not inject packets onto any segment. d) Packets received during the test may or may not be transferred. e) The test does not interfere with management functions. After performing this self-test, the agent will update the repeater health information (including rptrInfoOperStatus), and send a rptrInfoResetEvent notification.
.1.3.6.1.2.1.22.1.4.1.1.5,SNMP-REPEATER-MIB::rptrInfoPartitionedPorts,Gauge32,read-only,,current,,This object returns the total number of ports in the repeater whose current state meets all three of the following criteria: rptrPortOperStatus does not have the value notPresent(3), rptrPortAdminStatus is enabled(1), and rptrPortAutoPartitionState is autoPartitioned(2).
.1.3.6.1.2.1.22.1.4.1.1.6,SNMP-REPEATER-MIB::rptrInfoLastChange,TimeTicks,read-only,,current,,The value of sysUpTime when any of the following conditions occurred: 1) agent cold- or warm-started; 2) this instance of repeater was created (such as when a device or module was added to the system); 3) a change in the value of rptrInfoOperStatus; 4) ports were added or removed as members of the repeater; or 5) any of the counters associated with this repeater had a discontinuity.
.1.3.6.1.2.1.22.2,SNMP-REPEATER-MIB::rptrMonitorPackage,,,,,,
.1.3.6.1.2.1.22.2.1,SNMP-REPEATER-MIB::rptrMonitorRptrInfo,,,,,,
.1.3.6.1.2.1.22.2.1.1,SNMP-REPEATER-MIB::rptrMonitorTransmitCollisions,Counter32,read-only,,deprecated,,********* THIS OBJECT IS DEPRECATED ********** For a clause 9 (10Mb/s) repeater, this counter is incremented every time the repeater state machine enters the TRANSMIT COLLISION state from any state other than ONE PORT LEFT (Ref: Fig 9-2 [IEEE 802.3 Std]). For a clause 27 repeater, this counter is incremented every time the repeater core state diagram enters the Jam state as a result of Activity(ALL) > 1 (fig 27-2 [IEEE 802.3 Std]). The approximate minimum time for rollover of this counter is 16 hours in a 10Mb/s repeater and 1.6 hours in a 100Mb/s repeater.
.1.3.6.1.2.1.22.2.2,SNMP-REPEATER-MIB::rptrMonitorGroupInfo,,,,,,
.1.3.6.1.2.1.22.2.2.1,SNMP-REPEATER-MIB::rptrMonitorGroupTable,,not-accessible,,deprecated,,********* THIS OBJECT IS DEPRECATED ********** Table of performance and error statistics for the groups within the repeater. The number of entries is the same as that in the rptrGroupTable.
.1.3.6.1.2.1.22.2.2.1.1,SNMP-REPEATER-MIB::rptrMonitorGroupEntry,,not-accessible,rptrMonitorGroupIndex,deprecated,,********* THIS OBJECT IS DEPRECATED ********** An entry in the table, containing total performance and error statistics for a single group. Regular retrieval of the information in this table provides a means of tracking the performance and health of the networked devices attached to this group's ports. The counters in this table are redundant in the sense that they are the summations of information already available through other objects. However, these sums provide a considerable optimization of network management traffic over the otherwise necessary retrieval of the individual counters included in each sum. Note: Group-level counters are deprecated in this MIB. It is recommended that management applications instead use the repeater-level counters contained in the rptrMonTable.
.1.3.6.1.2.1.22.2.2.1.1.1,SNMP-REPEATER-MIB::rptrMonitorGroupIndex,Integer32,read-only,,deprecated,,********* THIS OBJECT IS DEPRECATED ********** This object identifies the group within the repeater for which this entry contains information.
.1.3.6.1.2.1.22.2.2.1.1.2,SNMP-REPEATER-MIB::rptrMonitorGroupTotalFrames,Counter32,read-only,,deprecated,,********* THIS OBJECT IS DEPRECATED ********** The total number of frames of valid frame length that have been received on the ports in this group and for which the FCSError and CollisionEvent signals were not asserted. This counter is the summation of the values of the rptrMonitorPortReadableFrames counters for all of the ports in the group. This statistic provides one of the parameters necessary for obtaining the packet error rate. The approximate minimum time for rollover of this counter is 80 hours in a 10Mb/s repeater.
.1.3.6.1.2.1.22.2.2.1.1.3,SNMP-REPEATER-MIB::rptrMonitorGroupTotalOctets,Counter32,read-only,,deprecated,,********* THIS OBJECT IS DEPRECATED ********** The total number of octets contained in the valid frames that have been received on the ports in this group. This counter is the summation of the values of the rptrMonitorPortReadableOctets counters for all of the ports in the group. This statistic provides an indicator of the total data transferred. The approximate minimum time for rollover of this counter is 58 minutes in a 10Mb/s repeater.
.1.3.6.1.2.1.22.2.2.1.1.4,SNMP-REPEATER-MIB::rptrMonitorGroupTotalErrors,Counter32,read-only,,deprecated,,********* THIS OBJECT IS DEPRECATED ********** The total number of errors which have occurred on all of the ports in this group. This counter is the summation of the values of the rptrMonitorPortTotalErrors counters for all of the ports in the group.
.1.3.6.1.2.1.22.2.3,SNMP-REPEATER-MIB::rptrMonitorPortInfo,,,,,,
.1.3.6.1.2.1.22.2.3.1,SNMP-REPEATER-MIB::rptrMonitorPortTable,,not-accessible,,current,,Table of performance and error statistics for the ports. The number of entries is the same as that in the rptrPortTable. The columnar object rptrMonitorPortLastChange is used to indicate possible discontinuities of counter type columnar objects in the table.
.1.3.6.1.2.1.22.2.3.1.1,SNMP-REPEATER-MIB::rptrMonitorPortEntry,,not-accessible,rptrMonitorPortGroupIndex:rptrMonitorPortIndex,current,,An entry in the table, containing performance and error statistics for a single port.
.1.3.6.1.2.1.22.2.3.1.1.1,SNMP-REPEATER-MIB::rptrMonitorPortGroupIndex,Integer32,read-only,,current,,This object identifies the group containing the port for which this entry contains information.
.1.3.6.1.2.1.22.2.3.1.1.2,SNMP-REPEATER-MIB::rptrMonitorPortIndex,Integer32,read-only,,current,,This object identifies the port within the group for which this entry contains information.
.1.3.6.1.2.1.22.2.3.1.1.3,SNMP-REPEATER-MIB::rptrMonitorPortReadableFrames,Counter32,read-only,,current,,This object is the number of frames of valid frame length that have been received on this port. This counter is incremented by one for each frame received on this port whose OctetCount is greater than or equal to minFrameSize and less than or equal to maxFrameSize (Ref: IEEE 802.3 Std, 4.4.2.1) and for which the FCSError and CollisionEvent signals are not asserted. A discontinuity may occur in the value when the value of object rptrMonitorPortLastChange changes. This statistic provides one of the parameters necessary for obtaining the packet error rate. The approximate minimum time for rollover of this counter is 80 hours at 10Mb/s.
.1.3.6.1.2.1.22.2.3.1.1.4,SNMP-REPEATER-MIB::rptrMonitorPortReadableOctets,Counter32,read-only,,current,,This object is the number of octets contained in valid frames that have been received on this port. This counter is incremented by OctetCount for each frame received on this port which has been determined to be a readable frame (i.e., including FCS octets but excluding framing bits and dribble bits). A discontinuity may occur in the value when the value of object rptrMonitorPortLastChange changes. This statistic provides an indicator of the total data transferred. The approximate minimum time for rollover of this counter in a 10Mb/s repeater is 58 minutes. For ports receiving traffic at a maximum rate in a 100Mb/s repeater, this counter can roll over in less than 6 minutes. Since that amount of time could be less than a management station's poll cycle time, in order to avoid a loss of information a management station is advised to also poll the rptrMonitorPortUpper32Octets object, or to use the 64-bit counter defined by rptrMonitorPortHCReadableOctets instead of the two 32-bit counters.
.1.3.6.1.2.1.22.2.3.1.1.5,SNMP-REPEATER-MIB::rptrMonitorPortFCSErrors,Counter32,read-only,,current,,This counter is incremented by one for each frame received on this port with the FCSError signal asserted and the FramingError and CollisionEvent signals deasserted and whose OctetCount is greater than or equal to minFrameSize and less than or equal to maxFrameSize (Ref: 4.4.2.1, IEEE 802.3 Std). A discontinuity may occur in the value when the value of object rptrMonitorPortLastChange changes. The approximate minimum time for rollover of this counter is 80 hours at 10Mb/s.
.1.3.6.1.2.1.22.2.3.1.1.6,SNMP-REPEATER-MIB::rptrMonitorPortAlignmentErrors,Counter32,read-only,,current,,This counter is incremented by one for each frame received on this port with the FCSError and FramingError signals asserted and CollisionEvent signal deasserted and whose OctetCount is greater than or equal to minFrameSize and less than or equal to maxFrameSize (Ref: IEEE 802.3 Std, 4.4.2.1). If rptrMonitorPortAlignmentErrors is incremented then the rptrMonitorPortFCSErrors Counter shall not be incremented for the same frame. A discontinuity may occur in the value when the value of object rptrMonitorPortLastChange changes. The approximate minimum time for rollover of this counter is 80 hours at 10Mb/s.
.1.3.6.1.2.1.22.2.3.1.1.7,SNMP-REPEATER-MIB::rptrMonitorPortFrameTooLongs,Counter32,read-only,,current,,This counter is incremented by one for each frame received on this port whose OctetCount is greater than maxFrameSize (Ref: 4.4.2.1, IEEE 802.3 Std). If rptrMonitorPortFrameTooLongs is incremented then neither the rptrMonitorPortAlignmentErrors nor the rptrMonitorPortFCSErrors counter shall be incremented for the frame. A discontinuity may occur in the value when the value of object rptrMonitorPortLastChange changes. The approximate minimum time for rollover of this counter is 61 days in a 10Mb/s repeater.
.1.3.6.1.2.1.22.2.3.1.1.8,SNMP-REPEATER-MIB::rptrMonitorPortShortEvents,Counter32,read-only,,current,,This counter is incremented by one for each CarrierEvent on this port with ActivityDuration less than ShortEventMaxTime. ShortEventMaxTime is greater than 74 bit times and less than 82 bit times. ShortEventMaxTime has tolerances included to provide for circuit losses between a conformance test point at the AUI and the measurement point within the state machine. Notes: ShortEvents may indicate externally generated noise hits which will cause the repeater to transmit Runts to its other ports, or propagate a collision (which may be late) back to the transmitting DTE and damaged frames to the rest of the network. Implementors may wish to consider selecting the ShortEventMaxTime towards the lower end of the allowed tolerance range to accommodate bit losses suffered through physical channel devices not budgeted for within this standard. The significance of this attribute is different in 10 and 100 Mb/s collision domains. Clause 9 repeaters perform fragment extension of short events which would be counted as runts on the interconnect ports of other repeaters. Clause 27 repeaters do not perform fragment extension. A discontinuity may occur in the value when the value of object rptrMonitorPortLastChange changes. The approximate minimum time for rollover of this counter is 16 hours in a 10Mb/s repeater.
.1.3.6.1.2.1.22.2.3.1.1.9,SNMP-REPEATER-MIB::rptrMonitorPortRunts,Counter32,read-only,,current,,This counter is incremented by one for each CarrierEvent on this port that meets one of the following two conditions. Only one test need be made. a) The ActivityDuration is greater than ShortEventMaxTime and less than ValidPacketMinTime and the CollisionEvent signal is deasserted. b) The OctetCount is less than 64, the ActivityDuration is greater than ShortEventMaxTime and the CollisionEvent signal is deasserted. ValidPacketMinTime is greater than or equal to 552 bit times and less than 565 bit times. An event whose length is greater than 74 bit times but less than 82 bit times shall increment either the shortEvents counter or the runts counter but not both. A CarrierEvent greater than or equal to 552 bit times but less than 565 bit times may or may not be counted as a runt. ValidPacketMinTime has tolerances included to provide for circuit losses between a conformance test point at the AUI and the measurement point within the state machine. Runts usually indicate collision fragments, a normal network event. In certain situations associated with large diameter networks a percentage of collision fragments may exceed ValidPacketMinTime. A discontinuity may occur in the value when the value of object rptrMonitorPortLastChange changes. The approximate minimum time for rollover of this counter is 16 hours in a 10Mb/s repeater.
.1.3.6.1.2.1.22.2.3.1.1.10,SNMP-REPEATER-MIB::rptrMonitorPortCollisions,Counter32,read-only,,current,,For a clause 9 repeater, this counter is incremented by one for any CarrierEvent signal on any port for which the CollisionEvent signal on this port is asserted. For a clause 27 repeater port the counter increments on entering the Collision Count Increment state of the partition state diagram (fig 27-8 of [IEEE 802.3 Std]). A discontinuity may occur in the value when the value of object rptrMonitorPortLastChange changes. The approximate minimum time for rollover of this counter is 16 hours in a 10Mb/s repeater.
.1.3.6.1.2.1.22.2.3.1.1.11,SNMP-REPEATER-MIB::rptrMonitorPortLateEvents,Counter32,read-only,,current,,For a clause 9 repeater port, this counter is incremented by one for each CarrierEvent on this port in which the CollIn(X) variable transitions to the value SQE (Ref: 9.6.6.2, IEEE 802.3 Std) while the ActivityDuration is greater than the LateEventThreshold. For a clause 27 repeater port, this counter is incremented by one on entering the Collision Count Increment state of the partition state diagram (fig 27-8) while the ActivityDuration is greater than the LateEvent- Threshold. Such a CarrierEvent is counted twice, as both a collision and as a lateEvent. The LateEventThreshold is greater than 480 bit times and less than 565 bit times. LateEventThreshold has tolerances included to permit an implementation to build a single threshold to serve as both the LateEventThreshold and ValidPacketMinTime threshold. A discontinuity may occur in the value when the value of object rptrMonitorPortLastChange changes. The approximate minimum time for rollover of this counter is 81 hours in a 10Mb/s repeater.
.1.3.6.1.2.1.22.2.3.1.1.12,SNMP-REPEATER-MIB::rptrMonitorPortVeryLongEvents,Counter32,read-only,,current,,For a clause 9 repeater port, this counter is incremented by one for each CarrierEvent whose ActivityDuration is greater than the MAU Jabber Lockup Protection timer TW3 (Ref: 9.6.1 & 9.6.5, IEEE 802.3 Std). For a clause 27 repeater port, this counter is incremented by one on entry to the Rx Jabber state of the receiver timer state diagram (fig 27-7). Other counters may be incremented as appropriate. A discontinuity may occur in the value when the value of object rptrMonitorPortLastChange changes.
.1.3.6.1.2.1.22.2.3.1.1.13,SNMP-REPEATER-MIB::rptrMonitorPortDataRateMismatches,Counter32,read-only,,current,,This counter is incremented by one for each frame received by this port that meets all of the conditions required by only one of the following two measurement methods: Measurement method A: 1) The CollisionEvent signal is not asserted (10Mb/s operation) or the Collision Count Increment state of the partition state diagram (fig 27-8 of [IEEE 802.3 Std]) has not been entered (100Mb/s operation). 2) The ActivityDuration is greater than ValidPacketMinTime. 3) The frequency (data rate) is detectably mismatched from the local transmit frequency. Measurement method B: 1) The CollisionEvent signal is not asserted (10Mb/s operation) or the Collision Count Increment state of the partition state diagram (fig 27-8 of [IEEE 802.3 Std]) has not been entered (100Mb/s operation). 2) The OctetCount is greater than 63. 3) The frequency (data rate) is detectably mismatched from the local transmit frequency. The exact degree of mismatch is vendor specific and is to be defined by the vendor for conformance testing. When this event occurs, other counters whose increment conditions were satisfied may or may not also be incremented, at the implementor's discretion. Whether or not the repeater was able to maintain data integrity is beyond the scope of this standard. A discontinuity may occur in the value when the value of object rptrMonitorPortLastChange changes.
.1.3.6.1.2.1.22.2.3.1.1.14,SNMP-REPEATER-MIB::rptrMonitorPortAutoPartitions,Counter32,read-only,,current,,This counter is incremented by one for each time the repeater has automatically partitioned this port. The conditions that cause a clause 9 repeater port to partition are specified in the partition state diagram in clause 9 of [IEEE 802.3 Std]. They are not differentiated here. A clause 27 repeater port partitions on entry to the Partition Wait state of the partition state diagram (fig 27-8 in [IEEE 802.3 Std]). A discontinuity may occur in the value when the value of object rptrMonitorPortLastChange changes.
.1.3.6.1.2.1.22.2.3.1.1.15,SNMP-REPEATER-MIB::rptrMonitorPortTotalErrors,Counter32,read-only,,current,,The total number of errors which have occurred on this port. This counter is the summation of the values of other error counters (for the same port), namely: rptrMonitorPortFCSErrors, rptrMonitorPortAlignmentErrors, rptrMonitorPortFrameTooLongs, rptrMonitorPortShortEvents, rptrMonitorPortLateEvents, rptrMonitorPortVeryLongEvents, rptrMonitorPortDataRateMismatches, and rptrMonitorPortSymbolErrors. This counter is redundant in the sense that it is the summation of information already available through other objects. However, it is included specifically because the regular retrieval of this object as a means of tracking the health of a port provides a considerable optimization of network management traffic over the otherwise necessary retrieval of the summed counters. Note that rptrMonitorPortRunts is not included in this total; this is because runts usually indicate collision fragments, a normal network event. A discontinuity may occur in the value when the value of object rptrMonitorPortLastChange changes.
.1.3.6.1.2.1.22.2.3.1.1.16,SNMP-REPEATER-MIB::rptrMonitorPortLastChange,TimeTicks,read-only,,current,,The value of sysUpTime when the last of the following occurred: 1) the agent cold- or warm-started; 2) the row for the port was created (such as when a device or module was added to the system); or 3) any condition that would cause one of the counters for the row to experience a discontinuity.
.1.3.6.1.2.1.22.2.3.2,SNMP-REPEATER-MIB::rptrMonitor100PortTable,,not-accessible,,current,,Table of additional performance and error statistics for 100Mb/s ports, above and beyond those parameters that apply to both 10 and 100Mbps ports. Entries exist only for ports attached to 100Mbps repeaters. The columnar object rptrMonitorPortLastChange is used to indicate possible discontinuities of counter type columnar objects in this table.
.1.3.6.1.2.1.22.2.3.2.1,SNMP-REPEATER-MIB::rptrMonitor100PortEntry,,not-accessible,rptrMonitorPortGroupIndex:rptrMonitorPortIndex,current,,An entry in the table, containing performance and error statistics for a single 100Mb/s port.
.1.3.6.1.2.1.22.2.3.2.1.1,SNMP-REPEATER-MIB::rptrMonitorPortIsolates,Counter32,read-only,,current,,This counter is incremented by one each time that the repeater port automatically isolates as a consequence of false carrier events. The conditions which cause a port to automatically isolate are defined by the transition from the False Carrier state to the Link Unstable state of the carrier integrity state diagram (figure 27-9) [IEEE 802.3 Standard]. Note: Isolates do not affect the value of the PortOperStatus object. A discontinuity may occur in the value when the value of object rptrMonitorPortLastChange changes.
.1.3.6.1.2.1.22.2.3.2.1.2,SNMP-REPEATER-MIB::rptrMonitorPortSymbolErrors,Counter32,read-only,,current,,This counter is incremented by one each time when valid length packet was received at the port and there was at least one occurrence of an invalid data symbol. This can increment only once per valid carrier event. A collision presence at any port of the repeater containing port N, will not cause this attribute to increment. A discontinuity may occur in the value when the value of object rptrMonitorPortLastChange changes. The approximate minimum time for rollover of this counter is 7.4 hours at 100Mb/s.
.1.3.6.1.2.1.22.2.3.2.1.3,SNMP-REPEATER-MIB::rptrMonitorPortUpper32Octets,Counter32,read-only,,current,,This object is the number of octets contained in valid frames that have been received on this port, modulo 2**32. That is, it contains the upper 32 bits of a 64-bit octets counter, of which the lower 32 bits are contained in the rptrMonitorPortReadableOctets object. This two-counter mechanism is provided for those network management protocols that do not support 64-bit counters (e.g. SNMP V1) and are used to manage a repeater type of 100Mb/s. Conformance clauses for this MIB are defined such that implementation of this object is not required in a system which does not support 100Mb/s. However, systems with mixed 10 and 100Mb/s ports may implement this object across all ports, including 10Mb/s. If this object is implemented, it must be according to the definition in the first paragraph of this description; that is, the value of this object MUST be a valid count. A discontinuity may occur in the value when the value of object rptrMonitorPortLastChange changes.
.1.3.6.1.2.1.22.2.3.2.1.4,SNMP-REPEATER-MIB::rptrMonitorPortHCReadableOctets,Counter64,read-only,,current,,This object is the number of octets contained in valid frames that have been received on this port. This counter is incremented by OctetCount for each frame received on this port which has been determined to be a readable frame (i.e., including FCS octets but excluding framing bits and dribble bits). This statistic provides an indicator of the total data transferred. This counter is a 64-bit version of rptrMonitor- PortReadableOctets. It should be used by network management protocols which suppport 64-bit counters (e.g. SNMPv2). Conformance clauses for this MIB are defined such that implementation of this object is not required in a system which does not support 100Mb/s. However, systems with mixed 10 and 100Mb/s ports may implement this object across all ports, including 10Mb/s. If this object is implemented, it must be according to the definition in the first paragraph of this description; that is, the value of this object MUST be a valid count. A discontinuity may occur in the value when the value of object rptrMonitorPortLastChange changes.
.1.3.6.1.2.1.22.2.4,SNMP-REPEATER-MIB::rptrMonitorAllRptrInfo,,,,,,
.1.3.6.1.2.1.22.2.4.1,SNMP-REPEATER-MIB::rptrMonTable,,not-accessible,,current,,A table of information about each non-trivial repeater. The number of entries in this table is the same as the number of entries in the rptrInfoTable. The columnar object rptrInfoLastChange is used to indicate possible discontinuities of counter type columnar objects in this table.
.1.3.6.1.2.1.22.2.4.1.1,SNMP-REPEATER-MIB::rptrMonEntry,,not-accessible,rptrInfoId,current,,An entry in the table, containing information about a single non-trivial repeater.
.1.3.6.1.2.1.22.2.4.1.1.1,SNMP-REPEATER-MIB::rptrMonTxCollisions,Counter32,read-only,,current,,For a clause 9 (10Mb/s) repeater, this counter is incremented every time the repeater state machine enters the TRANSMIT COLLISION state from any state other than ONE PORT LEFT (Ref: Fig 9-2 [IEEE 802.3 Std]). For a clause 27 repeater, this counter is incremented every time the repeater core state diagram enters the Jam state as a result of Activity(ALL) > 1 (fig 27-2 [IEEE 802.3 Std]). The approximate minimum time for rollover of this counter is 16 hours in a 10Mb/s repeater and 1.6 hours in a 100Mb/s repeater.
.1.3.6.1.2.1.22.2.4.1.1.3,SNMP-REPEATER-MIB::rptrMonTotalFrames,Counter32,read-only,,current,,The number of frames of valid frame length that have been received on the ports in this repeater and for which the FCSError and CollisionEvent signals were not asserted. If an implementation can not obtain a count of frames as seen by the repeater itself, this counter may be implemented as the summation of the values of the rptrMonitorPortReadableFrames counters for all of the ports in the repeater. This statistic provides one of the parameters necessary for obtaining the packet error rate. The approximate minimum time for rollover of this counter is 80 hours in a 10Mb/s repeater.
.1.3.6.1.2.1.22.2.4.1.1.4,SNMP-REPEATER-MIB::rptrMonTotalErrors,Counter32,read-only,,current,,The total number of errors which have occurred on all of the ports in this repeater. The errors included in this count are the same as those listed for the rptrMonitorPortTotalErrors counter. If an implementation can not obtain a count of these errors as seen by the repeater itself, this counter may be implemented as the summation of the values of the rptrMonitorPortTotalErrors counters for all of the ports in the repeater.
.1.3.6.1.2.1.22.2.4.1.1.5,SNMP-REPEATER-MIB::rptrMonTotalOctets,Counter32,read-only,,current,,The total number of octets contained in the valid frames that have been received on the ports in this group. If an implementation can not obtain a count of octets as seen by the repeater itself, this counter may be the summation of the values of the rptrMonitorPortReadableOctets counters for all of the ports in the group. This statistic provides an indicator of the total data transferred. The approximate minimum time for rollover of this counter in a 10Mb/s repeater is 58 minutes divided by the number of ports in the repeater. For 100Mb/s repeaters processing traffic at a maximum rate, this counter can roll over in less than 6 minutes divided by the number of ports in the repeater. Since that amount of time could be less than a management station's poll cycle time, in order to avoid a loss of information a management station is advised to also poll the rptrMonUpper32TotalOctets object, or to use the 64-bit counter defined by rptrMonHCTotalOctets instead of the two 32-bit counters.
.1.3.6.1.2.1.22.2.4.2,SNMP-REPEATER-MIB::rptrMon100Table,,not-accessible,,current,,A table of additional information about each 100Mb/s repeater, augmenting the entries in the rptrMonTable. Entries exist in this table only for 100Mb/s repeaters. The columnar object rptrInfoLastChange is used to indicate possible discontinuities of counter type columnar objects in this table.
.1.3.6.1.2.1.22.2.4.2.1,SNMP-REPEATER-MIB::rptrMon100Entry,,not-accessible,rptrInfoId,current,,An entry in the table, containing information about a single 100Mbps repeater.
.1.3.6.1.2.1.22.2.4.2.1.1,SNMP-REPEATER-MIB::rptrMonUpper32TotalOctets,Counter32,read-only,,current,,The total number of octets contained in the valid frames that have been received on the ports in this repeater, modulo 2**32. That is, it contains the upper 32 bits of a 64-bit counter, of which the lower 32 bits are contained in the rptrMonTotalOctets object. If an implementation can not obtain a count of octets as seen by the repeater itself, the 64-bit value may be the summation of the values of the rptrMonitorPortReadableOctets counters combined with the corresponding rptrMonitorPortUpper32Octets counters for all of the ports in the repeater. This statistic provides an indicator of the total data transferred within the repeater. This two-counter mechanism is provided for those network management protocols that do not support 64-bit counters (e.g. SNMP V1) and are used to manage a repeater type of 100Mb/s. Conformance clauses for this MIB are defined such that implementation of this object is not required in a system which does not support 100Mb/s. However, systems with mixed 10 and 100Mb/s ports may implement this object across all ports, including 10Mb/s. If this object is implemented, it must be according to the definition in the first paragraph of this description; that is, the value of this object MUST be a valid count.
.1.3.6.1.2.1.22.2.4.2.1.2,SNMP-REPEATER-MIB::rptrMonHCTotalOctets,Counter64,read-only,,current,,The total number of octets contained in the valid frames that have been received on the ports in this group. If a implementation can not obtain a count of octets as seen by the repeater itself, this counter may be the summation of the values of the rptrMonitorPortReadableOctets counters for all of the ports in the group. This statistic provides an indicator of the total data transferred. This counter is a 64-bit (high-capacity) version of rptrMonUpper32TotalOctets and rptrMonTotalOctets. It should be used by network management protocols which support 64-bit counters (e.g. SNMPv2). Conformance clauses for this MIB are defined such that implementation of this object is not required in a system which does not support 100Mb/s. However, systems with mixed 10 and 100Mb/s ports may implement this object across all ports, including 10Mb/s. If this object is implemented, it must be according to the definition in the first paragraph of this description; that is, the value of this object MUST be a valid count.
.1.3.6.1.2.1.22.3,SNMP-REPEATER-MIB::rptrAddrTrackPackage,,,,,,
.1.3.6.1.2.1.22.3.1,SNMP-REPEATER-MIB::rptrAddrTrackRptrInfo,,,,,,
.1.3.6.1.2.1.22.3.1.1,SNMP-REPEATER-MIB::rptrAddrSearchTable,,not-accessible,,current,,This table contains one entry per repeater in the system. It defines objects which allow a network management application to instruct an agent to watch for a given MAC address and report which port it was seen on. Only one address search can be in progress on each repeater at any one time. Before starting an address search, a management application should obtain 'ownership' of the entry in rptrAddrSearchTable for the repeater that is to perform the search. This is accomplished with the rptrAddrSearchLock and rptrAddrSearchStatus as follows: try_again: get(rptrAddrSearchLock, rptrAddrSearchStatus) while (rptrAddrSearchStatus != notInUse) { /* Loop waiting for objects to be available*/ short delay get(rptrAddrSearchLock, rptrAddrSearchStatus) } /* Try to claim map objects */ lock_value = rptrAddrSearchLock if ( set(rptrAddrSearchLock = lock_value, rptrAddrSearchStatus = inUse, rptrAddrSearchOwner = 'my-IP-address) == FAILURE) /* Another manager got the lock */ goto try_again /* I have the lock */ set (rptrAddrSearchAddress = <search target>) wait for rptrAddrSearchState to change from none if (rptrAddrSearchState == single) get (rptrAddrSearchGroup, rptrAddrSearchPort) /* release the lock, making sure not to overwrite anyone else's lock */ set (rptrAddrSearchLock = lock_value+1, rptrAddrSearchStatus = notInUse, rptrAddrSearchOwner = '') A management station first retrieves the values of the appropriate instances of the rptrAddrSearchLock and rptrAddrSearchStatus objects, periodically repeating the retrieval if necessary, until the value of rptrAddrSearchStatus is 'notInUse'. The management station then tries to set the same instance of the rptrAddrSearchLock object to the value it just retrieved, the same instance of the rptrAddrSearchStatus object to 'inUse', and the corresponding instance of rptrAddrSearchOwner to a value indicating itself. If the set operation succeeds, then the management station has obtained ownership of the rptrAddrSearchEntry, and the value of rptrAddrSearchLock is incremented by the agent (as per the semantics of TestAndIncr). Failure of the set operation indicates that some other manager has obtained ownership of the rptrAddrSearchEntry. Once ownership is obtained, the management station can proceed with the search operation. Note that the agent will reset rptrAddrSearchStatus to 'notInUse' if it has been in the 'inUse' state for an abnormally long period of time, to prevent a misbehaving manager from permanently locking the entry. It is suggested that this timeout period be between one and five minutes. When the management station has completed its search operation, it should free the entry by setting the instance of the rptrAddrSearchLock object to the previous value + 1, the instance of the rptrAddrSearchStatus to 'notInUse', and the instance of rptrAddrSearchOwner to a zero length string. This is done to prevent overwriting another station's lock.
.1.3.6.1.2.1.22.3.1.1.1,SNMP-REPEATER-MIB::rptrAddrSearchEntry,,not-accessible,rptrInfoId,current,,An entry containing objects for invoking an address search on a repeater.
.1.3.6.1.2.1.22.3.1.1.1.1,SNMP-REPEATER-MIB::rptrAddrSearchLock,INTEGER,read-write,,current,,This object is used by a management station as an advisory lock for this rptrAddrSearchEntry.
.1.3.6.1.2.1.22.3.1.1.1.2,SNMP-REPEATER-MIB::rptrAddrSearchStatus,INTEGER,read-write,,current,notInUse(1):inUse(2),This object is used to indicate that some management station is currently using this rptrAddrSearchEntry. Cooperating managers should set this object to 'notInUse' when they are finished using this entry. The agent will automatically set the value of this object to 'notInUse' if it has been set to 'inUse' for an unusually long period of time.
.1.3.6.1.2.1.22.3.1.1.1.3,SNMP-REPEATER-MIB::rptrAddrSearchAddress,OCTET,read-write,,current,,This object is used to search for a specified MAC address. When this object is set, an address search begins. This automatically sets the corresponding instance of the rptrAddrSearchState object to 'none' and the corresponding instances of the rptrAddrSearchGroup and rptrAddrSearchPort objects to 0. When a valid frame is received by this repeater with a source MAC address which matches the current value of rptrAddrSearchAddress, the agent will update the corresponding instances of rptrAddrSearchState, rptrAddrSearchGroup and rptrAddrSearchPort to reflect the current status of the search, and the group and port on which the frame was seen.
.1.3.6.1.2.1.22.3.1.1.1.4,SNMP-REPEATER-MIB::rptrAddrSearchState,INTEGER,read-only,,current,none(1):single(2):multiple(3),The current state of the MAC address search on this repeater. This object is initialized to 'none' when the corresponding instance of rptrAddrSearchAddress is set. If the agent detects the address on exactly one port, it will set this object to 'single', and set the corresponding instances of rptrAddrSearchGroup and rptrAddrSearchPort to reflect the group and port on which the address was heard. If the agent detects the address on more than one port, it will set this object to 'multiple'.
.1.3.6.1.2.1.22.3.1.1.1.5,SNMP-REPEATER-MIB::rptrAddrSearchGroup,Integer32,read-only,,current,,The group from which an error-free frame whose source address is equal to the corresponding instance of rptrAddrSearchAddress has been received. The value of this object is undefined when the corresponding instance of rptrAddrSearchState is equal to 'none' or 'multiple'.
.1.3.6.1.2.1.22.3.1.1.1.6,SNMP-REPEATER-MIB::rptrAddrSearchPort,Integer32,read-only,,current,,The port rom which an error-free frame whose source address is equal to the corresponding instance of rptrAddrSearchAddress has been received. The value of this object is undefined when the corresponding instance of rptrAddrSearchState is equal to 'none' or 'multiple'.
.1.3.6.1.2.1.22.3.1.1.1.7,SNMP-REPEATER-MIB::rptrAddrSearchOwner,OCTET,read-write,,current,,The entity which currently has 'ownership' of this rptrAddrSearchEntry.
.1.3.6.1.2.1.22.3.2,SNMP-REPEATER-MIB::rptrAddrTrackGroupInfo,,,,,,
.1.3.6.1.2.1.22.3.3,SNMP-REPEATER-MIB::rptrAddrTrackPortInfo,,,,,,
.1.3.6.1.2.1.22.3.3.1,SNMP-REPEATER-MIB::rptrAddrTrackTable,,not-accessible,,current,,Table of address mapping information about the ports.
.1.3.6.1.2.1.22.3.3.1.1,SNMP-REPEATER-MIB::rptrAddrTrackEntry,,not-accessible,rptrAddrTrackGroupIndex:rptrAddrTrackPortIndex,current,,An entry in the table, containing address mapping information about a single port.
.1.3.6.1.2.1.22.3.3.1.1.1,SNMP-REPEATER-MIB::rptrAddrTrackGroupIndex,INTEGER,read-only,,current,,This object identifies the group containing the port for which this entry contains information.
.1.3.6.1.2.1.22.3.3.1.1.2,SNMP-REPEATER-MIB::rptrAddrTrackPortIndex,INTEGER,read-only,,current,,This object identifies the port within the group for which this entry contains information.
.1.3.6.1.2.1.22.3.3.1.1.3,SNMP-REPEATER-MIB::rptrAddrTrackLastSourceAddress,OCTET,read-only,,deprecated,,********* THIS OBJECT IS DEPRECATED ********** This object is the SourceAddress of the last readable frame (i.e., counted by rptrMonitorPortReadableFrames) received by this port. This object has been deprecated because its value is undefined when no frames have been observed on this port. The replacement object is rptrAddrTrackNewLastSrcAddress.
.1.3.6.1.2.1.22.3.3.1.1.4,SNMP-REPEATER-MIB::rptrAddrTrackSourceAddrChanges,Counter32,read-only,,current,,This counter is incremented by one for each time that the rptrAddrTrackLastSourceAddress attribute for this port has changed. This may indicate whether a link is connected to a single DTE or another multi-user segment. A discontinuity may occur in the value when the value of object rptrMonitorPortLastChange changes. The approximate minimum time for rollover of this counter is 81 hours in a 10Mb/s repeater.
.1.3.6.1.2.1.22.3.3.1.1.5,SNMP-REPEATER-MIB::rptrAddrTrackNewLastSrcAddress,OCTET,read-only,,current,,This object is the SourceAddress of the last readable frame (i.e., counted by rptrMonitorPortReadableFrames) received by this port. If no frames have been received by this port since the agent began monitoring the port activity, the agent shall return a string of length zero.
.1.3.6.1.2.1.22.3.3.1.1.6,SNMP-REPEATER-MIB::rptrAddrTrackCapacity,Integer32,read-only,,current,,The maximum number of addresses that can be detected on this port. This value indicates to the maximum number of entries in the rptrExtAddrTrackTable relative to this port. If this object has the value of 1, the agent implements only the LastSourceAddress mechanism described by RFC 1368 or RFC 1516.
.1.3.6.1.2.1.22.3.3.2,SNMP-REPEATER-MIB::rptrExtAddrTrackTable,,not-accessible,,current,,A table to extend the address tracking table (i.e., rptrAddrTrackTable) with a list of source MAC addresses that were recently received on each port. The number of ports is the same as the number of entries in table rptrPortTable. The number of entries in this table depends on the agent/repeater implementation and the number of different addresses received on each port. The first entry for each port contains the same MAC address that is given by the rptrAddrTrackNewLastSrcAddress for that port. Entries in this table for a particular port are retained when that port is switched from one repeater to another. The ordering of MAC addresses listed for a particular port is implementation dependent.
.1.3.6.1.2.1.22.3.3.2.1,SNMP-REPEATER-MIB::rptrExtAddrTrackEntry,,not-accessible,rptrAddrTrackGroupIndex:rptrAddrTrackPortIndex:rptrExtAddrTrackMacIndex,current,,A row in the table of extended address tracking information for ports. Entries can not be directly created or deleted via SNMP operations.
.1.3.6.1.2.1.22.3.3.2.1.1,SNMP-REPEATER-MIB::rptrExtAddrTrackMacIndex,Integer32,read-only,,current,,The index of a source MAC address seen on the port. The ordering of MAC addresses listed for a particular port is implementation dependent. There is no implied relationship between a particular index and a particular MAC address. The index for a particular MAC address may change without notice.
.1.3.6.1.2.1.22.3.3.2.1.2,SNMP-REPEATER-MIB::rptrExtAddrTrackSourceAddress,OCTET,read-only,,current,,The source MAC address from a readable frame (i.e., counted by rptrMonitorPortReadableFrames) recently received by the port.
.1.3.6.1.2.1.22.4,SNMP-REPEATER-MIB::rptrTopNPackage,,,,,,
.1.3.6.1.2.1.22.4.1,SNMP-REPEATER-MIB::rptrTopNRptrInfo,,,,,,
.1.3.6.1.2.1.22.4.2,SNMP-REPEATER-MIB::rptrTopNGroupInfo,,,,,,
.1.3.6.1.2.1.22.4.3,SNMP-REPEATER-MIB::rptrTopNPortInfo,,,,,,
.1.3.6.1.2.1.22.4.3.1,SNMP-REPEATER-MIB::rptrTopNPortControlTable,,not-accessible,,current,,A table of control records for reports on the top `N' ports for the rate of a selected counter. The number of entries depends on the configuration of the agent. The maximum number of entries is implementation dependent.
.1.3.6.1.2.1.22.4.3.1.1,SNMP-REPEATER-MIB::rptrTopNPortControlEntry,,not-accessible,rptrTopNPortControlIndex,current,,A set of parameters that control the creation of a report of the top N ports according to several metrics.
.1.3.6.1.2.1.22.4.3.1.1.1,SNMP-REPEATER-MIB::rptrTopNPortControlIndex,Integer32,read-only,,current,,An index that uniquely identifies an entry in the rptrTopNPortControl table. Each such entry defines one top N report prepared for a repeater or system.
.1.3.6.1.2.1.22.4.3.1.1.2,SNMP-REPEATER-MIB::rptrTopNPortRepeaterId,Integer32,read-create,,current,,Identifies the repeater for which a top N report will be prepared (see rptrInfoId). If the value of this object is positive, only ports assigned to this repeater will be used to form the list in which to order the Top N table. If this value is zero, all ports will be eligible for inclusion on the list. The value of this object may not be modified if the associated rptrTopNPortRowStatus object is equal to active(1). If, for a particular row in this table, the repeater specified by the value of this object goes away (is removed from the rptrInfoTable) while the associated rptrTopNPortRowStatus object is equal to active(1), the row in this table is preserved by the agent but the value of rptrTopNPortRowStatus is changed to notInService(2), and the agent may time out the row if appropriate. If the specified repeater comes back (reappears in the rptrInfoTable) before the row has been timed out, the management station must set the value of the rptrTopNPortRowStatus object back to active(1) if desired (the agent doesn't do this automatically).
.1.3.6.1.2.1.22.4.3.1.1.3,SNMP-REPEATER-MIB::rptrTopNPortRateBase,INTEGER,read-create,,current,readableFrames(1):readableOctets(2):fcsErrors(3):alignmentErrors(4):frameTooLongs(5):shortEvents(6):runts(7):collisions(8):lateEvents(9):veryLongEvents(10):dataRateMismatches(11):autoPartitions(12):totalErrors(13):isolates(14):symbolErrors(15),The monitored variable, which the rptrTopNPortRate variable is based upon. The value of this object may not be modified if the associated rptrTopNPortRowStatus object has a value of active(1).
.1.3.6.1.2.1.22.4.3.1.1.4,SNMP-REPEATER-MIB::rptrTopNPortTimeRemaining,Integer32,read-create,,current,,The number of seconds left in the report currently being collected. When this object is modified by the management station, a new collection is started, possibly aborting a currently running report. The new value is used as the requested duration of this report, which is loaded into the associated rptrTopNPortDuration object. When this object is set to a non-zero value, any associated rptrTopNPortEntries shall be made inaccessible by the agent. While the value of this object is non-zero, it decrements by one per second until it reaches zero. During this time, all associated rptrTopNPortEntries shall remain inaccessible. At the time that this object decrements to zero, the report is made accessible in the rptrTopNPortTable. Thus, the rptrTopNPort table needs to be created only at the end of the collection interval. If the value of this object is set to zero while the associated report is running, the running report is aborted and no associated rptrTopNPortEntries are created.
.1.3.6.1.2.1.22.4.3.1.1.5,SNMP-REPEATER-MIB::rptrTopNPortDuration,Integer32,read-only,,current,,The number of seconds that this report has collected during the last sampling interval, or if this report is currently being collected, the number of seconds that this report is being collected during this sampling interval. When the associated rptrTopNPortTimeRemaining object is set, this object shall be set by the agent to the same value and shall not be modified until the next time the rptrTopNPortTimeRemaining is set. This value shall be zero if no reports have been requested for this rptrTopNPortControlEntry.
.1.3.6.1.2.1.22.4.3.1.1.6,SNMP-REPEATER-MIB::rptrTopNPortRequestedSize,Integer32,read-create,,current,,The maximum number of repeater ports requested for the Top N Table. When this object is created or modified, the agent should set rptrTopNPortGrantedSize as close to this object as is possible for the particular implementation and available resources.
.1.3.6.1.2.1.22.4.3.1.1.7,SNMP-REPEATER-MIB::rptrTopNPortGrantedSize,Integer32,read-only,,current,,The maximum number of repeater ports in the top N table. When the associated rptrTopNPortRequestedSize object is created or modified, the agent should set this object as closely to the requested value as is possible for the particular implementation and available resources. The agent must not lower this value except as a result of a set to the associated rptrTopNPortRequestedSize object.
.1.3.6.1.2.1.22.4.3.1.1.8,SNMP-REPEATER-MIB::rptrTopNPortStartTime,TimeTicks,read-only,,current,,The value of sysUpTime when this top N report was last started. In other words, this is the time that the associated rptrTopNPortTimeRemaining object was modified to start the requested report. If the report has not yet been started, the value of this object is zero.
.1.3.6.1.2.1.22.4.3.1.1.9,SNMP-REPEATER-MIB::rptrTopNPortOwner,OCTET,read-create,,current,,The entity that configured this entry and is using the resources assigned to it.
.1.3.6.1.2.1.22.4.3.1.1.10,SNMP-REPEATER-MIB::rptrTopNPortRowStatus,INTEGER,read-create,,current,active(1):notInService(2):notReady(3):createAndGo(4):createAndWait(5):destroy(6),The status of this row. If the value of this object is not equal to active(1), all associated entries in the rptrTopNPortTable shall be deleted by the agent.
.1.3.6.1.2.1.22.4.3.2,SNMP-REPEATER-MIB::rptrTopNPortTable,,not-accessible,,current,,A table of reports for the top `N' ports based on setting of associated control table entries. The maximum number of entries depends on the number of entries in table rptrTopNPortControlTable and the value of object rptrTopNPortGrantedSize for each entry. For each entry in the rptrTopNPortControlTable, repeater ports with the highest value of rptrTopNPortRate shall be placed in this table in decreasing order of that rate until there is no more room or until there are no more ports.
.1.3.6.1.2.1.22.4.3.2.1,SNMP-REPEATER-MIB::rptrTopNPortEntry,,not-accessible,rptrTopNPortControlIndex:rptrTopNPortIndex,current,,A set of statistics for a repeater port that is part of a top N report.
.1.3.6.1.2.1.22.4.3.2.1.1,SNMP-REPEATER-MIB::rptrTopNPortIndex,Integer32,read-only,,current,,An index that uniquely identifies an entry in the rptrTopNPort table among those in the same report. This index is between 1 and N, where N is the number of entries in this report. Increasing values of rptrTopNPortIndex shall be assigned to entries with decreasing values of rptrTopNPortRate until index N is assigned to the entry with the lowest value of rptrTopNPortRate or there are no more rptrTopNPortEntries. No ports are included in a report where their value of rptrTopNPortRate would be zero.
.1.3.6.1.2.1.22.4.3.2.1.2,SNMP-REPEATER-MIB::rptrTopNPortGroupIndex,Integer32,read-only,,current,,This object identifes the group containing the port for this entry. (See also object type rptrGroupIndex.)
.1.3.6.1.2.1.22.4.3.2.1.3,SNMP-REPEATER-MIB::rptrTopNPortPortIndex,Integer32,read-only,,current,,The index of the repeater port. (See object type rptrPortIndex.)
.1.3.6.1.2.1.22.4.3.2.1.4,SNMP-REPEATER-MIB::rptrTopNPortRate,Gauge32,read-only,,current,,The amount of change in the selected variable during this sampling interval for the identified port. The selected variable is that port's instance of the object selected by rptrTopNPortRateBase.
.1.3.6.1.2.1.22.5,SNMP-REPEATER-MIB::snmpRptrMod,,,,,,Management information for 802.3 repeaters. The following references are used throughout this MIB module: [IEEE 802.3 Std] refers to IEEE 802.3/ISO 8802-3 Information processing systems - Local area networks - Part 3: Carrier sense multiple access with collision detection (CSMA/CD) access method and physical layer specifications (1993). [IEEE 802.3 Mgt] refers to IEEE 802.3u-1995, '10 Mb/s & 100 Mb/s Management, Section 30,' Supplement to ANSI/IEEE 802.3. The following terms are used throughout this MIB module. For complete formal definitions, the IEEE 802.3 standards should be consulted wherever possible: System - A managed entity compliant with this MIB, and incorporating at least one managed 802.3 repeater. Chassis - An enclosure for one managed repeater, part of a managed repeater, or several managed repeaters. It typically contains an integral power supply and a variable number of available module slots. Repeater-unit - The portion of the repeater set that is inboard of the physical media interfaces. The physical media interfaces (MAUs, AUIs) may be physically separated from the repeater-unit, or they may be integrated into the same physical package. Trivial repeater-unit - An isolated port that can gather statistics. Group - A recommended, but optional, entity defined by the IEEE 802.3 management standard, in order to support a modular numbering scheme. The classical example allows an implementor to represent field-replaceable units as groups of ports, with the port numbering matching the modular hardware implementation. System interconnect segment - An internal segment allowing interconnection of ports belonging to different physical entities into the same logical manageable repeater. Examples of implementation might be backplane busses in modular hubs, or chaining cables in stacks of hubs. Stack - A scalable system that may include managed repeaters, in which modularity is achieved by interconnecting a number of different chassis. Module - A building block in a modular chassis. It typically maps into one 'slot'; however, the range of configurations may be very large, with several modules entering one slot, or one module covering several slots. 
.1.3.6.1.2.1.22.5.1,SNMP-REPEATER-MIB::snmpRptrModConf,,,,,,
.1.3.6.1.2.1.22.5.1.1,SNMP-REPEATER-MIB::snmpRptrModCompls,,,,,,
.1.3.6.1.2.1.22.5.1.1.1,SNMP-REPEATER-MIB::snmpRptrModComplRFC1368,,,,,,Compliance for RFC 1368. NOTE: this module compliance is OBSOLETE and replaced by snmpRptrModComplRFC1516.
.1.3.6.1.2.1.22.5.1.1.2,SNMP-REPEATER-MIB::snmpRptrModComplRFC1516,,,,,,********* THIS COMPLIANCE IS DEPRECATED ********** Compliance for RFC 1516 and for backwards compatibility with single-repeater, 10Mb/s-only implementations.
.1.3.6.1.2.1.22.5.1.1.3,SNMP-REPEATER-MIB::snmpRptrModCompl,,,,,,Compliance for the multi-segment version of the MIB module for a system with one or more repeater-units.
.1.3.6.1.2.1.22.5.1.2,SNMP-REPEATER-MIB::snmpRptrModObjGrps,,,,,,
.1.3.6.1.2.1.22.5.1.2.1,SNMP-REPEATER-MIB::snmpRptrGrpBasic1516,,,,,,********* THIS GROUP IS DEPRECATED ********** Basic group from RFCs 1368 and 1516. NOTE: this object group is DEPRECATED and replaced with snmpRptrGrpBasic.
.1.3.6.1.2.1.22.5.1.2.2,SNMP-REPEATER-MIB::snmpRptrGrpMonitor1516,,,,,,********* THIS GROUP IS DEPRECATED ********** Monitor group from RFCs 1368 and 1516. NOTE: this object group is DEPRECATED and replaced with snmpRptrGrpMonitor.
.1.3.6.1.2.1.22.5.1.2.3,SNMP-REPEATER-MIB::snmpRptrGrpAddrTrack1368,,,,,,Address tracking group from RFC 1368. NOTE: this object group is OBSOLETE and replaced with snmpRptrGrpAddrTrack1516.
.1.3.6.1.2.1.22.5.1.2.4,SNMP-REPEATER-MIB::snmpRptrGrpAddrTrack1516,,,,,,********* THIS GROUP IS DEPRECATED ********** Address tracking group from RFC 1516. NOTE: this object group is DEPRECATED and replaced with snmpRptrGrpAddrTrack.
.1.3.6.1.2.1.22.5.1.2.5,SNMP-REPEATER-MIB::snmpRptrGrpBasic,,,,,,Basic group for a system with one or more repeater-units in multi-segment (post-RFC 1516) version of the MIB module.
.1.3.6.1.2.1.22.5.1.2.6,SNMP-REPEATER-MIB::snmpRptrGrpMonitor,,,,,,Monitor group for a system with one or more repeater-units in multi-segment (post-RFC 1516) version of the MIB module.
.1.3.6.1.2.1.22.5.1.2.7,SNMP-REPEATER-MIB::snmpRptrGrpMonitor100,,,,,,Monitor group for 100Mb/s ports and repeaters in a system with one or more repeater-units in multi-segment (post-RFC 1516) version of the MIB module. Systems which support Counter64 should also implement snmpRptrGrpMonitor100w64.
.1.3.6.1.2.1.22.5.1.2.8,SNMP-REPEATER-MIB::snmpRptrGrpMonitor100w64,,,,,,Monitor group for 100Mb/s ports and repeaters in a system with one or more repeater-units and support for Counter64.
.1.3.6.1.2.1.22.5.1.2.9,SNMP-REPEATER-MIB::snmpRptrGrpAddrTrack,,,,,,Passive address tracking group for post-RFC 1516 version of the MIB module.
.1.3.6.1.2.1.22.5.1.2.10,SNMP-REPEATER-MIB::snmpRptrGrpExtAddrTrack,,,,,,Extended passive address tracking group for a system with one or more repeater-units in post-RFC 1516 version of the MIB module.
.1.3.6.1.2.1.22.5.1.2.11,SNMP-REPEATER-MIB::snmpRptrGrpRptrAddrSearch,,,,,,Active MAC address search group and topology mapping support for repeaters.
.1.3.6.1.2.1.22.5.1.2.12,SNMP-REPEATER-MIB::snmpRptrGrpTopNPort,,,,,,Top `N' group for repeater ports.
.1.3.6.1.2.1.22.5.1.3,SNMP-REPEATER-MIB::snmpRptrModNotGrps,,,,,,
.1.3.6.1.2.1.23,RIPv2-MIB::rip2,,,,,,The MIB module to describe the RIP2 Version 2 Protocol
.1.3.6.1.2.1.23.1,RIPv2-MIB::rip2Globals,,,,,,
.1.3.6.1.2.1.23.1.1,RIPv2-MIB::rip2GlobalRouteChanges,Counter32,read-only,,current,,The number of route changes made to the IP Route Database by RIP. This does not include the refresh of a route's age.
.1.3.6.1.2.1.23.1.2,RIPv2-MIB::rip2GlobalQueries,Counter32,read-only,,current,,The number of responses sent to RIP queries from other systems.
.1.3.6.1.2.1.23.2,RIPv2-MIB::rip2IfStatTable,,not-accessible,,current,,A list of subnets which require separate status monitoring in RIP.
.1.3.6.1.2.1.23.2.1,RIPv2-MIB::rip2IfStatEntry,,not-accessible,rip2IfStatAddress,current,,A Single Routing Domain in a single Subnet.
.1.3.6.1.2.1.23.2.1.1,RIPv2-MIB::rip2IfStatAddress,IpAddress,read-only,,current,,The IP Address of this system on the indicated subnet. For unnumbered interfaces, the value 0.0.0.N, where the least significant 24 bits (N) is the ifIndex for the IP Interface in network byte order.
.1.3.6.1.2.1.23.2.1.2,RIPv2-MIB::rip2IfStatRcvBadPackets,Counter32,read-only,,current,,The number of RIP response packets received by the RIP process which were subsequently discarded for any reason (e.g. a version 0 packet, or an unknown command type).
.1.3.6.1.2.1.23.2.1.3,RIPv2-MIB::rip2IfStatRcvBadRoutes,Counter32,read-only,,current,,The number of routes, in valid RIP packets, which were ignored for any reason (e.g. unknown address family, or invalid metric).
.1.3.6.1.2.1.23.2.1.4,RIPv2-MIB::rip2IfStatSentUpdates,Counter32,read-only,,current,,The number of triggered RIP updates actually sent on this interface. This explicitly does NOT include full updates sent containing new information.
.1.3.6.1.2.1.23.2.1.5,RIPv2-MIB::rip2IfStatStatus,INTEGER,read-create,,current,active(1):notInService(2):notReady(3):createAndGo(4):createAndWait(5):destroy(6),Writing invalid has the effect of deleting this interface.
.1.3.6.1.2.1.23.3,RIPv2-MIB::rip2IfConfTable,,not-accessible,,current,,A list of subnets which require separate configuration in RIP.
.1.3.6.1.2.1.23.3.1,RIPv2-MIB::rip2IfConfEntry,,not-accessible,rip2IfConfAddress,current,,A Single Routing Domain in a single Subnet.
.1.3.6.1.2.1.23.3.1.1,RIPv2-MIB::rip2IfConfAddress,IpAddress,read-only,,current,,The IP Address of this system on the indicated subnet. For unnumbered interfaces, the value 0.0.0.N, where the least significant 24 bits (N) is the ifIndex for the IP Interface in network byte order.
.1.3.6.1.2.1.23.3.1.2,RIPv2-MIB::rip2IfConfDomain,OCTET,read-create,,obsolete,,Value inserted into the Routing Domain field of all RIP packets sent on this interface.
.1.3.6.1.2.1.23.3.1.3,RIPv2-MIB::rip2IfConfAuthType,INTEGER,read-create,,current,noAuthentication(1):simplePassword(2):md5(3),The type of Authentication used on this interface.
.1.3.6.1.2.1.23.3.1.4,RIPv2-MIB::rip2IfConfAuthKey,OCTET,read-create,,current,,The value to be used as the Authentication Key whenever the corresponding instance of rip2IfConfAuthType has a value other than noAuthentication. A modification of the corresponding instance of rip2IfConfAuthType does not modify the rip2IfConfAuthKey value. If a string shorter than 16 octets is supplied, it will be left- justified and padded to 16 octets, on the right, with nulls (0x00). Reading this object always results in an OCTET STRING of length zero; authentication may not be bypassed by reading the MIB object.
.1.3.6.1.2.1.23.3.1.5,RIPv2-MIB::rip2IfConfSend,INTEGER,read-create,,current,doNotSend(1):ripVersion1(2):rip1Compatible(3):ripVersion2(4):ripV1Demand(5):ripV2Demand(6),What the router sends on this interface. ripVersion1 implies sending RIP updates compliant with RFC 1058. rip1Compatible implies broadcasting RIP-2 updates using RFC 1058 route subsumption rules. ripVersion2 implies multicasting RIP-2 updates. ripV1Demand indicates the use of Demand RIP on a WAN interface under RIP Version 1 rules. ripV2Demand indicates the use of Demand RIP on a WAN interface under Version 2 rules.
.1.3.6.1.2.1.23.3.1.6,RIPv2-MIB::rip2IfConfReceive,INTEGER,read-create,,current,rip1(1):rip2(2):rip1OrRip2(3):doNotRecieve(4),This indicates which version of RIP updates are to be accepted. Note that rip2 and rip1OrRip2 implies reception of multicast packets.
.1.3.6.1.2.1.23.3.1.7,RIPv2-MIB::rip2IfConfDefaultMetric,INTEGER,read-create,,current,,This variable indicates the metric that is to be used for the default route entry in RIP updates originated on this interface. A value of zero indicates that no default route should be originated; in this case, a default route via another router may be propagated.
.1.3.6.1.2.1.23.3.1.8,RIPv2-MIB::rip2IfConfStatus,INTEGER,read-create,,current,active(1):notInService(2):notReady(3):createAndGo(4):createAndWait(5):destroy(6),Writing invalid has the effect of deleting this interface.
.1.3.6.1.2.1.23.3.1.9,RIPv2-MIB::rip2IfConfSrcAddress,IpAddress,read-create,,current,,The IP Address this system will use as a source address on this interface. If it is a numbered interface, this MUST be the same value as rip2IfConfAddress. On unnumbered interfaces, it must be the value of rip2IfConfAddress for some interface on the system.
.1.3.6.1.2.1.23.4,RIPv2-MIB::rip2PeerTable,,not-accessible,,current,,A list of RIP Peers.
.1.3.6.1.2.1.23.4.1,RIPv2-MIB::rip2PeerEntry,,not-accessible,rip2PeerAddress:rip2PeerDomain,current,,Information regarding a single routing peer.
.1.3.6.1.2.1.23.4.1.1,RIPv2-MIB::rip2PeerAddress,IpAddress,read-only,,current,,The IP Address that the peer is using as its source address. Note that on an unnumbered link, this may not be a member of any subnet on the system.
.1.3.6.1.2.1.23.4.1.2,RIPv2-MIB::rip2PeerDomain,OCTET,read-only,,current,,The value in the Routing Domain field in RIP packets received from the peer. As domain suuport is deprecated, this must be zero.
.1.3.6.1.2.1.23.4.1.3,RIPv2-MIB::rip2PeerLastUpdate,TimeTicks,read-only,,current,,The value of sysUpTime when the most recent RIP update was received from this system.
.1.3.6.1.2.1.23.4.1.4,RIPv2-MIB::rip2PeerVersion,INTEGER,read-only,,current,,The RIP version number in the header of the last RIP packet received.
.1.3.6.1.2.1.23.4.1.5,RIPv2-MIB::rip2PeerRcvBadPackets,Counter32,read-only,,current,,The number of RIP response packets from this peer discarded as invalid.
.1.3.6.1.2.1.23.4.1.6,RIPv2-MIB::rip2PeerRcvBadRoutes,Counter32,read-only,,current,,The number of routes from this peer that were ignored because the entry format was invalid.
.1.3.6.1.2.1.23.5,RIPv2-MIB::rip2Conformance,,,,,,
.1.3.6.1.2.1.23.5.1,RIPv2-MIB::rip2Groups,,,,,,
.1.3.6.1.2.1.23.5.1.1,RIPv2-MIB::rip2GlobalGroup,,,,,,This group defines global controls for RIP-II systems.
.1.3.6.1.2.1.23.5.1.2,RIPv2-MIB::rip2IfStatGroup,,,,,,This group defines interface statistics for RIP-II systems.
.1.3.6.1.2.1.23.5.1.3,RIPv2-MIB::rip2IfConfGroup,,,,,,This group defines interface configuration for RIP-II systems.
.1.3.6.1.2.1.23.5.1.4,RIPv2-MIB::rip2PeerGroup,,,,,,This group defines peer information for RIP-II systems.
.1.3.6.1.2.1.23.5.2,RIPv2-MIB::rip2Compliances,,,,,,
.1.3.6.1.2.1.23.5.2.1,RIPv2-MIB::rip2Compliance,,,,,,The compliance statement 
.1.3.6.1.2.1.26,IANA-MAU-MIB::snmpDot3MauMgt,,,,,,
.1.3.6.1.2.1.26.0,MAU-MIB::snmpDot3MauTraps,,,,,,
.1.3.6.1.2.1.26.0.1,MAU-MIB::rpMauJabberTrap,,,,,,This trap is sent whenever a managed repeater MAU enters the jabber state. The agent MUST throttle the generation of consecutive rpMauJabberTraps so that there is at least a five-second gap between them.
.1.3.6.1.2.1.26.0.2,MAU-MIB::ifMauJabberTrap,,,,,,This trap is sent whenever a managed interface MAU enters the jabber state. The agent MUST throttle the generation of consecutive ifMauJabberTraps so that there is at least a five-second gap between them.
.1.3.6.1.2.1.26.1,MAU-MIB::dot3RpMauBasicGroup,,,,,,
.1.3.6.1.2.1.26.1.1,MAU-MIB::rpMauTable,,not-accessible,,current,,Table of descriptive and status information about the MAU(s) attached to the ports of a repeater.
.1.3.6.1.2.1.26.1.1.1,MAU-MIB::rpMauEntry,,not-accessible,rpMauGroupIndex:rpMauPortIndex:rpMauIndex,current,,An entry in the table, containing information about a single MAU.
.1.3.6.1.2.1.26.1.1.1.1,MAU-MIB::rpMauGroupIndex,Integer32,read-only,,current,,This variable uniquely identifies the group containing the port to which the MAU described by this entry is connected. Note: In practice, a group will generally be a field-replaceable unit (i.e., module, card, or board) that can fit in the physical system enclosure, and the group number will correspond to a number marked on the physical enclosure. The group denoted by a particular value of this object is the same as the group denoted by the same value of rptrGroupIndex.
.1.3.6.1.2.1.26.1.1.1.2,MAU-MIB::rpMauPortIndex,Integer32,read-only,,current,,This variable uniquely identifies the repeater port within group rpMauGroupIndex to which the MAU described by this entry is connected.
.1.3.6.1.2.1.26.1.1.1.3,MAU-MIB::rpMauIndex,Integer32,read-only,,current,,This variable uniquely identifies the MAU described by this entry from among other MAUs connected to the same port (rpMauPortIndex).
.1.3.6.1.2.1.26.1.1.1.4,MAU-MIB::rpMauType,OBJECT,read-only,,current,,This object identifies the MAU type. Values for standard IEEE 802.3 MAU types are defined in the IANA maintained IANA-MAU-MIB module, as OBJECT-IDENTITIES of dot3MauType. If the MAU type is unknown, the object identifier zeroDotZero is returned.
.1.3.6.1.2.1.26.1.1.1.5,MAU-MIB::rpMauStatus,INTEGER,read-write,,current,other(1):unknown(2):operational(3):standby(4):shutdown(5):reset(6),The current state of the MAU. This object MAY be implemented as a read-only object by those agents and MAUs that do not implement software control of the MAU state. Some agents may not support setting the value of this object to some of the enumerated values. The value other(1) is returned if the MAU is in a state other than one of the states 2 through 6. The value unknown(2) is returned when the MAU's true state is unknown; for example, when it is being initialized. A MAU in the operational(3) state is fully functional; it operates, and passes signals to its attached DTE or repeater port in accordance to its specification. A MAU in standby(4) state forces DI and CI to idle, and the media transmitter to idle or fault, if supported. Standby(4) mode only applies to link type MAUs. The state of rpMauMediaAvailable is unaffected. A MAU in shutdown(5) state assumes the same condition on DI, CI, and the media transmitter, as though it were powered down or not connected. The MAU MAY return other(1) value for the rpMauJabberState and rpMauMediaAvailable objects when it is in this state. For an AUI, this state will remove power from the AUI. Setting this variable to the value reset(6) resets the MAU in the same manner as a power-off, power-on cycle of at least one-half second would. The agent is not required to return the value reset(6). Setting this variable to the value operational(3), standby(4), or shutdown(5) causes the MAU to assume the respective state, except that setting a mixing-type MAU or an AUI to standby(4) will cause the MAU to enter the shutdown state.
.1.3.6.1.2.1.26.1.1.1.6,MAU-MIB::rpMauMediaAvailable,INTEGER,read-only,,current,other(1):unknown(2):available(3):notAvailable(4):remoteFault(5):invalidSignal(6):remoteJabber(7):remoteLinkLoss(8):remoteTest(9):offline(10):autoNegError(11):pmdLinkFault(12):wisFrameLoss(13):wisSignalLoss(14):pcsLinkFault(15):excessiveBER(16):dxsLinkFault(17):pxsLinkFault(18):availableReduced(19):ready(20),This object identifies Media Available state of the MAU, complementary to the rpMauStatus. Values for the standard IEEE 802.3 Media Available states are defined in the IANA maintained IANA-MAU-MIB module, as IANAifMauMediaAvailable TC.
.1.3.6.1.2.1.26.1.1.1.7,MAU-MIB::rpMauMediaAvailableStateExits,Counter32,read-only,,current,,A count of the number of times that rpMauMediaAvailable for this MAU instance leaves the state available(3). Discontinuities in the value of this counter can occur at re-initialization of the management system and at other times, as indicated by the value of rptrMonitorPortLastChange.
.1.3.6.1.2.1.26.1.1.1.8,MAU-MIB::rpMauJabberState,INTEGER,read-only,,current,other(1):unknown(2):noJabber(3):jabbering(4),The value other(1) is returned if the jabber state is not 2, 3, or 4. The agent MUST always return other(1) for MAU type dot3MauTypeAUI. The value unknown(2) is returned when the MAU's true state is unknown; for example, when it is being initialized. If the MAU is not jabbering the agent returns noJabber(3). This is the 'normal' state. If the MAU is in jabber state the agent returns the jabbering(4) value.
.1.3.6.1.2.1.26.1.1.1.9,MAU-MIB::rpMauJabberingStateEnters,Counter32,read-only,,current,,A count of the number of times that mauJabberState for this MAU instance enters the state jabbering(4). For MAUs of type dot3MauTypeAUI, dot3MauType100BaseT4, dot3MauType100BaseTX, dot3MauType100BaseFX, and all 1000Mbps types, this counter will always indicate zero. Discontinuities in the value of this counter can occur at re-initialization of the management system and at other times, as indicated by the value of rptrMonitorPortLastChange.
.1.3.6.1.2.1.26.1.1.1.10,MAU-MIB::rpMauFalseCarriers,Counter32,read-only,,current,,A count of the number of false carrier events during IDLE in 100BASE-X links. This counter does not increment at the symbol rate. It can increment after a valid carrier completion at a maximum rate of once per 100 ms until the next carrier event. This counter increments only for MAUs of type dot3MauType100BaseT4, dot3MauType100BaseTX, dot3MauType100BaseFX, and all 1000Mbps types. For all other MAU types, this counter will always indicate zero. The approximate minimum time for rollover of this counter is 7.4 hours. Discontinuities in the value of this counter can occur at re-initialization of the management system and at other times, as indicated by the value of rptrMonitorPortLastChange.
.1.3.6.1.2.1.26.1.2,MAU-MIB::rpJackTable,,not-accessible,,current,,Information about the external jacks attached to MAUs attached to the ports of a repeater.
.1.3.6.1.2.1.26.1.2.1,MAU-MIB::rpJackEntry,,not-accessible,rpMauGroupIndex:rpMauPortIndex:rpMauIndex:rpJackIndex,current,,An entry in the table, containing information about a particular jack.
.1.3.6.1.2.1.26.1.2.1.1,MAU-MIB::rpJackIndex,Integer32,not-accessible,,current,,This variable uniquely identifies the jack described by this entry from among other jacks attached to the same MAU (rpMauIndex).
.1.3.6.1.2.1.26.1.2.1.2,MAU-MIB::rpJackType,INTEGER,read-only,,current,other(1):rj45(2):rj45S(3):db9(4):bnc(5):fAUI(6):mAUI(7):fiberSC(8):fiberMIC(9):fiberST(10):telco(11):mtrj(12):hssdc(13):fiberLC(14):cx4(15):sfpPlusDA(16),The jack connector type, as it appears on the outside of the system.
.1.3.6.1.2.1.26.2,MAU-MIB::dot3IfMauBasicGroup,,,,,,
.1.3.6.1.2.1.26.2.1,MAU-MIB::ifMauTable,,not-accessible,,current,,Table of descriptive and status information about MAU(s) attached to an interface.
.1.3.6.1.2.1.26.2.1.1,MAU-MIB::ifMauEntry,,not-accessible,ifMauIfIndex:ifMauIndex,current,,An entry in the table, containing information about a single MAU.
.1.3.6.1.2.1.26.2.1.1.1,MAU-MIB::ifMauIfIndex,Integer32,read-only,,current,,This variable uniquely identifies the interface to which the MAU described by this entry is connected.
.1.3.6.1.2.1.26.2.1.1.2,MAU-MIB::ifMauIndex,Integer32,read-only,,current,,This variable uniquely identifies the MAU described by this entry from among other MAUs connected to the same interface (ifMauIfIndex).
.1.3.6.1.2.1.26.2.1.1.3,MAU-MIB::ifMauType,OBJECT,read-only,,current,,This object identifies the MAU type. Values for standard IEEE 802.3 MAU types are defined in the IANA maintained IANA-MAU-MIB module, as OBJECT-IDENTITIES of dot3MauType. If the MAU type is unknown, the object identifier zeroDotZero is returned. This object represents the operational type of the MAU, as determined by either 1) the result of the auto-negotiation function or 2) if auto-negotiation is not enabled or is not implemented for this MAU, by the value of the object ifMauDefaultType. In case 2), a set to the object ifMauDefaultType will force the MAU into the new operating mode.
.1.3.6.1.2.1.26.2.1.1.4,MAU-MIB::ifMauStatus,INTEGER,read-write,,current,other(1):unknown(2):operational(3):standby(4):shutdown(5):reset(6),The current state of the MAU. This object MAY be implemented as a read-only object by those agents and MAUs that do not implement software control of the MAU state. Some agents may not support setting the value of this object to some of the enumerated values. The value other(1) is returned if the MAU is in a state other than one of the states 2 through 6. The value unknown(2) is returned when the MAU's true state is unknown; for example, when it is being initialized. A MAU in the operational(3) state is fully functional; it operates, and passes signals to its attached DTE or repeater port in accordance to its specification. A MAU in standby(4) state forces DI and CI to idle and the media transmitter to idle or fault, if supported. Standby(4) mode only applies to link type MAUs. The state of ifMauMediaAvailable is unaffected. A MAU in shutdown(5) state assumes the same condition on DI, CI, and the media transmitter, as though it were powered down or not connected. The MAU MAY return other(1) value for the ifMauJabberState and ifMauMediaAvailable objects when it is in this state. For an AUI, this state will remove power from the AUI. Setting this variable to the value reset(6) resets the MAU in the same manner as a power-off, power-on cycle of at least one-half second would. The agent is not required to return the value reset(6). Setting this variable to the value operational(3), standby(4), or shutdown(5) causes the MAU to assume the respective state, except that setting a mixing-type MAU or an AUI to standby(4) will cause the MAU to enter the shutdown state.
.1.3.6.1.2.1.26.2.1.1.5,MAU-MIB::ifMauMediaAvailable,INTEGER,read-only,,current,other(1):unknown(2):available(3):notAvailable(4):remoteFault(5):invalidSignal(6):remoteJabber(7):remoteLinkLoss(8):remoteTest(9):offline(10):autoNegError(11):pmdLinkFault(12):wisFrameLoss(13):wisSignalLoss(14):pcsLinkFault(15):excessiveBER(16):dxsLinkFault(17):pxsLinkFault(18):availableReduced(19):ready(20),This object identifies Media Available state of the MAU, complementary to the ifMauStatus. Values for the standard IEEE 802.3 Media Available states are defined in the IANA maintained IANA-MAU-MIB module, as IANAifMauMediaAvailable TC.
.1.3.6.1.2.1.26.2.1.1.6,MAU-MIB::ifMauMediaAvailableStateExits,Counter32,read-only,,current,,A count of the number of times that ifMauMediaAvailable for this MAU instance leaves the state available(3). Discontinuities in the value of this counter can occur at re-initialization of the management system and at other times, as indicated by the value of ifCounterDiscontinuityTime.
.1.3.6.1.2.1.26.2.1.1.7,MAU-MIB::ifMauJabberState,INTEGER,read-only,,current,other(1):unknown(2):noJabber(3):jabbering(4),The value other(1) is returned if the jabber state is not 2, 3, or 4. The agent MUST always return other(1) for MAU type dot3MauTypeAUI. The value unknown(2) is returned when the MAU's true state is unknown; for example, when it is being initialized. If the MAU is not jabbering the agent returns noJabber(3). This is the 'normal' state. If the MAU is in jabber state the agent returns the jabbering(4) value.
.1.3.6.1.2.1.26.2.1.1.8,MAU-MIB::ifMauJabberingStateEnters,Counter32,read-only,,current,,A count of the number of times that mauJabberState for this MAU instance enters the state jabbering(4). This counter will always indicate zero for MAUs of type dot3MauTypeAUI and those of speeds above 10Mbps. Discontinuities in the value of this counter can occur at re-initialization of the management system and at other times, as indicated by the value of ifCounterDiscontinuityTime.
.1.3.6.1.2.1.26.2.1.1.9,MAU-MIB::ifMauFalseCarriers,Counter32,read-only,,current,,A count of the number of false carrier events during IDLE in 100BASE-X and 1000BASE-X links. For all other MAU types, this counter will always indicate zero. This counter does not increment at the symbol rate. It can increment after a valid carrier completion at a maximum rate of once per 100 ms for 100BASE-X and once per 10us for 1000BASE-X until the next CarrierEvent. This counter can roll over very quickly. A management station is advised to poll the ifMauHCFalseCarriers instead of this counter in order to avoid loss of information. Discontinuities in the value of this counter can occur at re-initialization of the management system and at other times, as indicated by the value of ifCounterDiscontinuityTime.
.1.3.6.1.2.1.26.2.1.1.10,MAU-MIB::ifMauTypeList,Integer32,read-only,,deprecated,,********* THIS OBJECT IS DEPRECATED ********** This object has been deprecated in favour of ifMauTypeListBits. A value that uniquely identifies the set of possible IEEE 802.3 types that the MAU could be. The value is a sum that initially takes the value zero. Then, for each type capability of this MAU, 2 raised to the power noted below is added to the sum. For example, a MAU that has the capability to be only 10BASE-T would have a value of 512 (2**9). In contrast, a MAU that supports both 10Base-T (full duplex) and 100BASE-TX (full duplex) would have a value of ((2**11) + (2**16)), or 67584. The powers of 2 assigned to the capabilities are these: Power Capability 0 other or unknown 1 AUI 2 10BASE-5 3 FOIRL 4 10BASE-2 5 10BASE-T duplex mode unknown 6 10BASE-FP 7 10BASE-FB 8 10BASE-FL duplex mode unknown 9 10BROAD36 10 10BASE-T half duplex mode 11 10BASE-T full duplex mode 12 10BASE-FL half duplex mode 13 10BASE-FL full duplex mode 14 100BASE-T4 15 100BASE-TX half duplex mode 16 100BASE-TX full duplex mode 17 100BASE-FX half duplex mode 18 100BASE-FX full duplex mode 19 100BASE-T2 half duplex mode 20 100BASE-T2 full duplex mode If auto-negotiation is present on this MAU, this object will map to ifMauAutoNegCapability.
.1.3.6.1.2.1.26.2.1.1.11,MAU-MIB::ifMauDefaultType,OBJECT,read-write,,current,,This object identifies the default administrative baseband MAU type to be used in conjunction with the operational MAU type denoted by ifMauType. The set of possible values for this object is the same as the set defined for the ifMauType object. This object represents the administratively-configured type of the MAU. If auto-negotiation is not enabled or is not implemented for this MAU, the value of this object determines the operational type of the MAU. In this case, a set to this object will force the MAU into the specified operating mode. If auto-negotiation is implemented and enabled for this MAU, the operational type of the MAU is determined by auto-negotiation, and the value of this object denotes the type to which the MAU will automatically revert if/when auto-negotiation is later disabled. NOTE TO IMPLEMENTORS: It may be necessary to provide for underlying hardware implementations which do not follow the exact behavior specified above. In particular, when ifMauAutoNegAdminStatus transitions from enabled to disabled, the agent implementation MUST ensure that the operational type of the MAU (as reported by ifMauType) correctly transitions to the value specified by this object, rather than continuing to operate at the value earlier determined by the auto-negotiation function.
.1.3.6.1.2.1.26.2.1.1.12,MAU-MIB::ifMauAutoNegSupported,INTEGER,read-only,,current,true(1):false(2),This object indicates whether or not auto-negotiation is supported on this MAU.
.1.3.6.1.2.1.26.2.1.1.13,MAU-MIB::ifMauTypeListBits,BITS,read-only,,current,bOther(0):bAUI(1):b10base5(2):bFoirl(3):b10base2(4):b10baseT(5):b10baseFP(6):b10baseFB(7):b10baseFL(8):b10broad36(9):b10baseTHD(10):b10baseTFD(11):b10baseFLHD(12):b10baseFLFD(13):b100baseT4(14):b100baseTXHD(15):b100baseTXFD(16):b100baseFXHD(17):b100baseFXFD(18):b100baseT2HD(19):b100baseT2FD(20):b1000baseXHD(21):b1000baseXFD(22):b1000baseLXHD(23):b1000baseLXFD(24):b1000baseSXHD(25):b1000baseSXFD(26):b1000baseCXHD(27):b1000baseCXFD(28):b1000baseTHD(29):b1000baseTFD(30):b10GbaseX(31):b10GbaseLX4(32):b10GbaseR(33):b10GbaseER(34):b10GbaseLR(35):b10GbaseSR(36):b10GbaseW(37):b10GbaseEW(38):b10GbaseLW(39):b10GbaseSW(40):b10GbaseCX4(41):b2BaseTL(42):b10PassTS(43):b100BaseBX10D(44):b100BaseBX10U(45):b100BaseLX10(46):b1000BaseBX10D(47):b1000BaseBX10U(48):b1000BaseLX10(49):b1000BasePX10D(50):b1000BasePX10U(51):b1000BasePX20D(52):b1000BasePX20U(53):b10GbaseT(54):b10GbaseLRM(55):b1000baseKX(56):b10GbaseKX4(57):b10GbaseKR(58):b10G1GbasePRXD1(59):b10G1GbasePRXD2(60):b10G1GbasePRXD3(61):b10G1GbasePRXU1(62):b10G1GbasePRXU2(63):b10G1GbasePRXU3(64):b10GbasePRD1(65):b10GbasePRD2(66):b10GbasePRD3(67):b10GbasePRU1(68):b10GbasePRU3(69):b40GbaseKR4(70):b40GbaseCR4(71):b40GbaseSR4(72):b40GbaseFR(73):b40GbaseLR4(74):b100GbaseCR10(75):b100GbaseSR10(76):b100GbaseLR4(77):b100GbaseER4(78):b1000baseT1(79):b1000basePX30D(80):b1000basePX30U(81):b1000basePX40D(82):b1000basePX40U(83):b10G1GbasePRXD4(84):b10G1GbasePRXU4(85):b10GbasePRD4(86):b10GbasePRU4(87):b25GbaseCR(88):b25GbaseCRS(89):b25GbaseKR(90):b25GbaseKRS(91):b25GbaseR(92):b25GbaseSR(93):b25GbaseT(94):b40GbaseER4(95):b40GbaseR(96):b40GbaseT(97):b100GbaseCR4(98):b100GbaseKR4(99):b100GbaseKP4(100):b100GbaseR(101):b100GbaseSR4(102),A value that uniquely identifies the set of possible IEEE 802.3 types that the MAU could be. If auto-negotiation is present on this MAU, this object will map to ifMauAutoNegCapabilityBits. Note that this MAU may be capable of operating as a MAU type that is beyond the scope of this MIB. This is indicated by returning the bit value bOther in addition to any bit values for standard capabilities that are listed in the IANAifMauTypeListBits TC.
.1.3.6.1.2.1.26.2.1.1.14,MAU-MIB::ifMauHCFalseCarriers,Counter64,read-only,,current,,A count of the number of false carrier events during IDLE in 100BASE-X and 1000BASE-X links. For all other MAU types, this counter will always indicate zero. This counter does not increment at the symbol rate. This counter is a 64-bit version of ifMauFalseCarriers. Since the 32-bit version of this counter can roll over very quickly, management stations are advised to poll the 64-bit version instead, in order to avoid loss of information. Discontinuities in the value of this counter can occur at re-initialization of the management system and at other times, as indicated by the value of ifCounterDiscontinuityTime.
.1.3.6.1.2.1.26.2.2,MAU-MIB::ifJackTable,,not-accessible,,current,,Information about the external jacks attached to MAUs attached to an interface.
.1.3.6.1.2.1.26.2.2.1,MAU-MIB::ifJackEntry,,not-accessible,ifMauIfIndex:ifMauIndex:ifJackIndex,current,,An entry in the table, containing information about a particular jack.
.1.3.6.1.2.1.26.2.2.1.1,MAU-MIB::ifJackIndex,Integer32,not-accessible,,current,,This variable uniquely identifies the jack described by this entry from among other jacks attached to the same MAU.
.1.3.6.1.2.1.26.2.2.1.2,MAU-MIB::ifJackType,INTEGER,read-only,,current,other(1):rj45(2):rj45S(3):db9(4):bnc(5):fAUI(6):mAUI(7):fiberSC(8):fiberMIC(9):fiberST(10):telco(11):mtrj(12):hssdc(13):fiberLC(14):cx4(15):sfpPlusDA(16),The jack connector type, as it appears on the outside of the system.
.1.3.6.1.2.1.26.3,MAU-MIB::dot3BroadMauBasicGroup,,,,,,
.1.3.6.1.2.1.26.3.1,MAU-MIB::broadMauBasicTable,,not-accessible,,deprecated,,********* THIS OBJECT IS DEPRECATED ********** This entire table has been deprecated. There have been no reported implementations of this table, and it is unlikely that there ever will be. IEEE recommends that broadband MAU types should not be used for new installations. Table of descriptive and status information about the broadband MAUs connected to interfaces.
.1.3.6.1.2.1.26.3.1.1,MAU-MIB::broadMauBasicEntry,,not-accessible,broadMauIfIndex:broadMauIndex,deprecated,,********* THIS OBJECT IS DEPRECATED ********** An entry in the table, containing information about a single broadband MAU.
.1.3.6.1.2.1.26.3.1.1.1,MAU-MIB::broadMauIfIndex,Integer32,read-only,,deprecated,,********* THIS OBJECT IS DEPRECATED ********** This variable uniquely identifies the interface to which the MAU described by this entry is connected.
.1.3.6.1.2.1.26.3.1.1.2,MAU-MIB::broadMauIndex,Integer32,read-only,,deprecated,,********* THIS OBJECT IS DEPRECATED ********** This variable uniquely identifies the MAU connected to interface broadMauIfIndex that is described by this entry.
.1.3.6.1.2.1.26.3.1.1.3,MAU-MIB::broadMauXmtRcvSplitType,INTEGER,read-only,,deprecated,other(1):single(2):dual(3),********* THIS OBJECT IS DEPRECATED ********** This object indicates the type of frequency multiplexing/cabling system used to separate the transmit and receive paths for the 10BROAD36 MAU. The value other(1) is returned if the split type is not either single or dual. The value single(2) indicates a single cable system. The value dual(3) indicates a dual cable system, offset normally zero.
.1.3.6.1.2.1.26.3.1.1.4,MAU-MIB::broadMauXmtCarrierFreq,Integer32,read-only,,deprecated,,********* THIS OBJECT IS DEPRECATED ********** This variable indicates the transmit carrier frequency of the 10BROAD36 MAU in MHz/4; that is, in units of 250 kHz.
.1.3.6.1.2.1.26.3.1.1.5,MAU-MIB::broadMauTranslationFreq,Integer32,read-only,,deprecated,,********* THIS OBJECT IS DEPRECATED ********** This variable indicates the translation offset frequency of the 10BROAD36 MAU in MHz/4; that is, in units of 250 kHz.
.1.3.6.1.2.1.26.4,IANA-MAU-MIB::dot3MauType,,,,,,
.1.3.6.1.2.1.26.4.1,IANA-MAU-MIB::dot3MauTypeAUI,,,,,,no internal MAU, view from AUI
.1.3.6.1.2.1.26.4.2,IANA-MAU-MIB::dot3MauType10Base5,,,,,,thick coax MAU
.1.3.6.1.2.1.26.4.3,IANA-MAU-MIB::dot3MauTypeFoirl,,,,,,FOIRL MAU
.1.3.6.1.2.1.26.4.4,IANA-MAU-MIB::dot3MauType10Base2,,,,,,thin coax MAU
.1.3.6.1.2.1.26.4.5,IANA-MAU-MIB::dot3MauType10BaseT,,,,,,UTP MAU. Note that it is strongly recommended that agents return either dot3MauType10BaseTHD or dot3MauType10BaseTFD if the duplex mode is known. However, management applications should be prepared to receive this MAU type value from older agent implementations.
.1.3.6.1.2.1.26.4.6,IANA-MAU-MIB::dot3MauType10BaseFP,,,,,,passive fiber MAU
.1.3.6.1.2.1.26.4.7,IANA-MAU-MIB::dot3MauType10BaseFB,,,,,,sync fiber MAU
.1.3.6.1.2.1.26.4.8,IANA-MAU-MIB::dot3MauType10BaseFL,,,,,,async fiber MAU. Note that it is strongly recommended that agents return either dot3MauType10BaseFLHD or dot3MauType10BaseFLFD if the duplex mode is known. However, management applications should be prepared to receive this MAU type value from older agent implementations.
.1.3.6.1.2.1.26.4.9,IANA-MAU-MIB::dot3MauType10Broad36,,,,,,broadband DTE MAU. Note that 10BROAD36 MAUs can be attached to interfaces but not to repeaters.
.1.3.6.1.2.1.26.4.10,IANA-MAU-MIB::dot3MauType10BaseTHD,,,,,,UTP MAU, half duplex mode
.1.3.6.1.2.1.26.4.11,IANA-MAU-MIB::dot3MauType10BaseTFD,,,,,,UTP MAU, full duplex mode
.1.3.6.1.2.1.26.4.12,IANA-MAU-MIB::dot3MauType10BaseFLHD,,,,,,async fiber MAU, half duplex mode
.1.3.6.1.2.1.26.4.13,IANA-MAU-MIB::dot3MauType10BaseFLFD,,,,,,async fiber MAU, full duplex mode
.1.3.6.1.2.1.26.4.14,IANA-MAU-MIB::dot3MauType100BaseT4,,,,,,4 pair category 3 UTP
.1.3.6.1.2.1.26.4.15,IANA-MAU-MIB::dot3MauType100BaseTXHD,,,,,,2 pair category 5 UTP, half duplex mode
.1.3.6.1.2.1.26.4.16,IANA-MAU-MIB::dot3MauType100BaseTXFD,,,,,,2 pair category 5 UTP, full duplex mode
.1.3.6.1.2.1.26.4.17,IANA-MAU-MIB::dot3MauType100BaseFXHD,,,,,,X fiber over PMT, half duplex mode
.1.3.6.1.2.1.26.4.18,IANA-MAU-MIB::dot3MauType100BaseFXFD,,,,,,X fiber over PMT, full duplex mode
.1.3.6.1.2.1.26.4.19,IANA-MAU-MIB::dot3MauType100BaseT2HD,,,,,,2 pair category 3 UTP, half duplex mode
.1.3.6.1.2.1.26.4.20,IANA-MAU-MIB::dot3MauType100BaseT2FD,,,,,,2 pair category 3 UTP, full duplex mode
.1.3.6.1.2.1.26.4.21,IANA-MAU-MIB::dot3MauType1000BaseXHD,,,,,,PCS/PMA, unknown PMD, half duplex mode
.1.3.6.1.2.1.26.4.22,IANA-MAU-MIB::dot3MauType1000BaseXFD,,,,,,PCS/PMA, unknown PMD, full duplex mode
.1.3.6.1.2.1.26.4.23,IANA-MAU-MIB::dot3MauType1000BaseLXHD,,,,,,Fiber over long-wavelength laser, half duplex mode
.1.3.6.1.2.1.26.4.24,IANA-MAU-MIB::dot3MauType1000BaseLXFD,,,,,,Fiber over long-wavelength laser, full duplex mode
.1.3.6.1.2.1.26.4.25,IANA-MAU-MIB::dot3MauType1000BaseSXHD,,,,,,Fiber over short-wavelength laser, half duplex mode
.1.3.6.1.2.1.26.4.26,IANA-MAU-MIB::dot3MauType1000BaseSXFD,,,,,,Fiber over short-wavelength laser, full duplex mode
.1.3.6.1.2.1.26.4.27,IANA-MAU-MIB::dot3MauType1000BaseCXHD,,,,,,Copper over 150-Ohm balanced cable, half duplex mode
.1.3.6.1.2.1.26.4.28,IANA-MAU-MIB::dot3MauType1000BaseCXFD,,,,,,Copper over 150-Ohm balanced cable, full duplex mode
.1.3.6.1.2.1.26.4.29,IANA-MAU-MIB::dot3MauType1000BaseTHD,,,,,,Four-pair Category 5 UTP, half duplex mode
.1.3.6.1.2.1.26.4.30,IANA-MAU-MIB::dot3MauType1000BaseTFD,,,,,,Four-pair Category 5 UTP, full duplex mode
.1.3.6.1.2.1.26.4.31,IANA-MAU-MIB::dot3MauType10GigBaseX,,,,,,X PCS/PMA, unknown PMD.
.1.3.6.1.2.1.26.4.32,IANA-MAU-MIB::dot3MauType10GigBaseLX4,,,,,,X fiber over WWDM optics
.1.3.6.1.2.1.26.4.33,IANA-MAU-MIB::dot3MauType10GigBaseR,,,,,,R PCS/PMA, unknown PMD.
.1.3.6.1.2.1.26.4.34,IANA-MAU-MIB::dot3MauType10GigBaseER,,,,,,R fiber over 1550 nm optics
.1.3.6.1.2.1.26.4.35,IANA-MAU-MIB::dot3MauType10GigBaseLR,,,,,,R fiber over 1310 nm optics
.1.3.6.1.2.1.26.4.36,IANA-MAU-MIB::dot3MauType10GigBaseSR,,,,,,R fiber over 850 nm optics
.1.3.6.1.2.1.26.4.37,IANA-MAU-MIB::dot3MauType10GigBaseW,,,,,,W PCS/PMA, unknown PMD.
.1.3.6.1.2.1.26.4.38,IANA-MAU-MIB::dot3MauType10GigBaseEW,,,,,,W fiber over 1550 nm optics
.1.3.6.1.2.1.26.4.39,IANA-MAU-MIB::dot3MauType10GigBaseLW,,,,,,W fiber over 1310 nm optics
.1.3.6.1.2.1.26.4.40,IANA-MAU-MIB::dot3MauType10GigBaseSW,,,,,,W fiber over 850 nm optics
.1.3.6.1.2.1.26.4.41,IANA-MAU-MIB::dot3MauType10GigBaseCX4,,,,,,X copper over 8 pair 100-Ohm balanced cable
.1.3.6.1.2.1.26.4.42,IANA-MAU-MIB::dot3MauType2BaseTL,,,,,,Voice grade UTP copper, up to 2700m, optional PAF
.1.3.6.1.2.1.26.4.43,IANA-MAU-MIB::dot3MauType10PassTS,,,,,,Voice grade UTP copper, up to 750m, optional PAF
.1.3.6.1.2.1.26.4.44,IANA-MAU-MIB::dot3MauType100BaseBX10D,,,,,,One single-mode fiber OLT, long wavelength, 10km
.1.3.6.1.2.1.26.4.45,IANA-MAU-MIB::dot3MauType100BaseBX10U,,,,,,One single-mode fiber ONU, long wavelength, 10km
.1.3.6.1.2.1.26.4.46,IANA-MAU-MIB::dot3MauType100BaseLX10,,,,,,Two single-mode fibers, long wavelength, 10km
.1.3.6.1.2.1.26.4.47,IANA-MAU-MIB::dot3MauType1000BaseBX10D,,,,,,One single-mode fiber OLT, long wavelength, 10km
.1.3.6.1.2.1.26.4.48,IANA-MAU-MIB::dot3MauType1000BaseBX10U,,,,,,One single-mode fiber ONU, long wavelength, 10km
.1.3.6.1.2.1.26.4.49,IANA-MAU-MIB::dot3MauType1000BaseLX10,,,,,,Two sigle-mode fiber, long wavelength, 10km
.1.3.6.1.2.1.26.4.50,IANA-MAU-MIB::dot3MauType1000BasePX10D,,,,,,One single-mode fiber EPON OLT, 10km
.1.3.6.1.2.1.26.4.51,IANA-MAU-MIB::dot3MauType1000BasePX10U,,,,,,One single-mode fiber EPON ONU, 10km
.1.3.6.1.2.1.26.4.52,IANA-MAU-MIB::dot3MauType1000BasePX20D,,,,,,One single-mode fiber EPON OLT, 20km
.1.3.6.1.2.1.26.4.53,IANA-MAU-MIB::dot3MauType1000BasePX20U,,,,,,One single-mode fiber EPON ONU, 20km
.1.3.6.1.2.1.26.4.54,IANA-MAU-MIB::dot3MauType10GbaseT,,,,,,Four-pair Category 6A or better, full duplex mode only
.1.3.6.1.2.1.26.4.55,IANA-MAU-MIB::dot3MauType10GbaseLRM,,,,,,R multimode fiber over 1310 nm optics
.1.3.6.1.2.1.26.4.56,IANA-MAU-MIB::dot3MauType1000baseKX,,,,,,X backplane, full duplex mode only
.1.3.6.1.2.1.26.4.57,IANA-MAU-MIB::dot3MauType10GbaseKX4,,,,,,4 lane X backplane, full duplex mode only
.1.3.6.1.2.1.26.4.58,IANA-MAU-MIB::dot3MauType10GbaseKR,,,,,,R backplane, full duplex mode only
.1.3.6.1.2.1.26.4.59,IANA-MAU-MIB::dot3MauType10G1GbasePRXD1,,,,,,One single-mode fiber asymmetric-rate EPON OLT, supporting low power budget (PRX10)
.1.3.6.1.2.1.26.4.60,IANA-MAU-MIB::dot3MauType10G1GbasePRXD2,,,,,,One single-mode fiber asymmetric-rate EPON OLT, supporting medium power budget (PRX20)
.1.3.6.1.2.1.26.4.61,IANA-MAU-MIB::dot3MauType10G1GbasePRXD3,,,,,,One single-mode fiber asymmetric-rate EPON OLT, supporting high power budget (PRX30)
.1.3.6.1.2.1.26.4.62,IANA-MAU-MIB::dot3MauType10G1GbasePRXU1,,,,,,One single-mode fiber asymmetric-rate EPON ONU, supporting low power budget (PRX10)
.1.3.6.1.2.1.26.4.63,IANA-MAU-MIB::dot3MauType10G1GbasePRXU2,,,,,,One single-mode fiber asymmetric-rate EPON ONU, supporting medium power budget (PRX20)
.1.3.6.1.2.1.26.4.64,IANA-MAU-MIB::dot3MauType10G1GbasePRXU3,,,,,,One single-mode fiber asymmetric-rate EPON ONU, supporting high power budget (PRX30)
.1.3.6.1.2.1.26.4.65,IANA-MAU-MIB::dot3MauType10GbasePRD1,,,,,,One single-mode fiber symmetric-rate EPON OLT, supporting low power budget (PR10)
.1.3.6.1.2.1.26.4.66,IANA-MAU-MIB::dot3MauType10GbasePRD2,,,,,,One single-mode fiber symmetric-rate EPON OLT, supporting medium power budget (PR20)
.1.3.6.1.2.1.26.4.67,IANA-MAU-MIB::dot3MauType10GbasePRD3,,,,,,One single-mode fiber symmetric-rate EPON OLT, supporting high power budget (PR30)
.1.3.6.1.2.1.26.4.68,IANA-MAU-MIB::dot3MauType10GbasePRU1,,,,,,One single-mode fiber symmetric-rate EPON ONU, supporting low and medium power budget (PR10 and PR20)
.1.3.6.1.2.1.26.4.69,IANA-MAU-MIB::dot3MauType10GbasePRU3,,,,,,One single-mode fiber symmetric-rate EPON ONU, supporting high power budget (PR30)
.1.3.6.1.2.1.26.4.70,IANA-MAU-MIB::dot3MauType40GbaseKR4,,,,,,40GBASE-R PCS/PMA over an electrical backplane
.1.3.6.1.2.1.26.4.71,IANA-MAU-MIB::dot3MauType40GbaseCR4,,,,,,40GBASE-R PCS/PMA over 4 lane shielded copper balanced cable
.1.3.6.1.2.1.26.4.72,IANA-MAU-MIB::dot3MauType40GbaseSR4,,,,,,40GBASE-R PCS/PMA over 4 lane multimode fiber
.1.3.6.1.2.1.26.4.73,IANA-MAU-MIB::dot3MauType40GbaseFR,,,,,,40GBASE-R PCS/PMA over single mode fiber
.1.3.6.1.2.1.26.4.74,IANA-MAU-MIB::dot3MauType40GbaseLR4,,,,,,40GBASE-R PCS/PMA over 4 WDM lane single mode fiber
.1.3.6.1.2.1.26.4.75,IANA-MAU-MIB::dot3MauType100GbaseCR10,,,,,,100GBASE-R PCS/PMA over 10 lane shielded copper balanced cable
.1.3.6.1.2.1.26.4.76,IANA-MAU-MIB::dot3MauType100GbaseSR10,,,,,,100GBASE-R PCS/PMA over 10 lane multimode fiber
.1.3.6.1.2.1.26.4.77,IANA-MAU-MIB::dot3MauType100GbaseLR4,,,,,,100GBASE-R PCS/PMA over 4 WDM lane single mode fiber, long reach
.1.3.6.1.2.1.26.4.78,IANA-MAU-MIB::dot3MauType100GbaseER4,,,,,,100GBASE-R PCS/PMA over 4 WDM lane single mode fiber PMD, extended reach
.1.3.6.1.2.1.26.4.79,IANA-MAU-MIB::dot3MauType1000baseT1,,,,,,1000BASE-T1 single balanced twisted-pair copper cabling PHY
.1.3.6.1.2.1.26.4.80,IANA-MAU-MIB::dot3MauType1000basePX30D,,,,,,One single-mode fiber EPON OLT, 20km, 1:32 split ratio
.1.3.6.1.2.1.26.4.81,IANA-MAU-MIB::dot3MauType1000basePX30U,,,,,,One single-mode fiber EPON ONU, 20km, 1:32 split ratio
.1.3.6.1.2.1.26.4.82,IANA-MAU-MIB::dot3MauType1000basePX40D,,,,,,One single-mode fiber EPON OLT, 20km, 1:64 split ratio
.1.3.6.1.2.1.26.4.83,IANA-MAU-MIB::dot3MauType1000basePX40U,,,,,,One single-mode fiber EPON ONU, 20km, 1:64 split ratio
.1.3.6.1.2.1.26.4.84,IANA-MAU-MIB::dot3MauType10G1GbasePRXD4,,,,,,One single-mode fiber asymmetric-rate EPON OLT, supporting extended power budget (PRX40)
.1.3.6.1.2.1.26.4.85,IANA-MAU-MIB::dot3MauType10G1GbasePRXU4,,,,,,One single-mode fiber asymmetric-rate EPON ONU, supporting extended power budget (PRX40)
.1.3.6.1.2.1.26.4.86,IANA-MAU-MIB::dot3MauType10GbasePRD4,,,,,,One single-mode fiber symmetric-rate EPON OLT, supporting extended power budget (PR40)
.1.3.6.1.2.1.26.4.87,IANA-MAU-MIB::dot3MauType10GbasePRU4,,,,,,One single-mode fiber symmetric-rate EPON ONU, supporting extended power budget (PR40)
.1.3.6.1.2.1.26.4.88,IANA-MAU-MIB::dot3MauType25GbaseCR,,,,,,25GBASE-R PCS/PMA over shielded balanced copper cable
.1.3.6.1.2.1.26.4.89,IANA-MAU-MIB::dot3MauType25GbaseCRS,,,,,,25GBASE-R PCS/PMA over shielded balanced copper cable without RS-FEC
.1.3.6.1.2.1.26.4.90,IANA-MAU-MIB::dot3MauType25GbaseKR,,,,,,25GBASE-R PCS/PMA over an electrical backplane
.1.3.6.1.2.1.26.4.91,IANA-MAU-MIB::dot3MauType25GbaseKRS,,,,,,25GBASE-R PCS/PMA over an electrical backplane without RS-FEC
.1.3.6.1.2.1.26.4.92,IANA-MAU-MIB::dot3MauType25GbaseR,,,,,,25GBASE-R PCS/PMA over undefined PMD
.1.3.6.1.2.1.26.4.93,IANA-MAU-MIB::dot3MauType25GbaseSR,,,,,,25GBASE-R PCS/PMA over multimode fiber
.1.3.6.1.2.1.26.4.94,IANA-MAU-MIB::dot3MauType25GbaseT,,,,,,Four-pair twisted-pair balanced copper cabling
.1.3.6.1.2.1.26.4.95,IANA-MAU-MIB::dot3MauType40GbaseER4,,,,,,40GBASE-R PCS/PMA over 4 WDM lane single mode fiber
.1.3.6.1.2.1.26.4.96,IANA-MAU-MIB::dot3MauType40GbaseR,,,,,,40GBASE-R PCS as over undefined PMA/PMD
.1.3.6.1.2.1.26.4.97,IANA-MAU-MIB::dot3MauType40GbaseT,,,,,,Four-pair twisted-pair balanced copper cabling
.1.3.6.1.2.1.26.4.98,IANA-MAU-MIB::dot3MauType100GbaseCR4,,,,,, 100GBASE-R PCS/PMA over 4 lane shielded copper balanced cable
.1.3.6.1.2.1.26.4.99,IANA-MAU-MIB::dot3MauType100GbaseKR4,,,,,,100GBASE-R PCS/PMA over an electrical backplane
.1.3.6.1.2.1.26.4.100,IANA-MAU-MIB::dot3MauType100GbaseKP4,,,,,,100GBASE-P PCS/PMA over an electrical backplane PMD
.1.3.6.1.2.1.26.4.101,IANA-MAU-MIB::dot3MauType100GbaseR,,,,,,100GBASE-R Multi-lane PCS over undefined PMA/PMD
.1.3.6.1.2.1.26.4.102,IANA-MAU-MIB::dot3MauType100GbaseSR4,,,,,,100GBASE-R PCS/PMA over 4 lane multimode fiber
.1.3.6.1.2.1.26.5,MAU-MIB::dot3IfMauAutoNegGroup,,,,,,
.1.3.6.1.2.1.26.5.1,MAU-MIB::ifMauAutoNegTable,,not-accessible,,current,,Configuration and status objects for the auto-negotiation function of MAUs attached to interfaces. The ifMauAutoNegTable applies to systems in which auto-negotiation is supported on one or more MAUs attached to interfaces. Note that if auto-negotiation is present and enabled, the ifMauType object reflects the result of the auto-negotiation function.
.1.3.6.1.2.1.26.5.1.1,MAU-MIB::ifMauAutoNegEntry,,not-accessible,ifMauIfIndex:ifMauIndex,current,,An entry in the table, containing configuration and status information for the auto-negotiation function of a particular MAU.
.1.3.6.1.2.1.26.5.1.1.1,MAU-MIB::ifMauAutoNegAdminStatus,INTEGER,read-write,,current,enabled(1):disabled(2),Setting this object to enabled(1) will cause the interface that has the auto-negotiation signaling ability to be enabled. If the value of this object is disabled(2) then the interface will act as it would if it had no auto-negotiation signaling. Under these conditions, an IEEE 802.3 MAU will immediately be forced to the state indicated by the value of the object ifMauDefaultType. NOTE TO IMPLEMENTORS: When ifMauAutoNegAdminStatus transitions from enabled to disabled, the agent implementation MUST ensure that the operational type of the MAU (as reported by ifMauType) correctly transitions to the value specified by the ifMauDefaultType object, rather than continuing to operate at the value earlier determined by the auto-negotiation function.
.1.3.6.1.2.1.26.5.1.1.2,MAU-MIB::ifMauAutoNegRemoteSignaling,INTEGER,read-only,,current,detected(1):notdetected(2),A value indicating whether the remote end of the link is using auto-negotiation signaling. It takes the value detected(1) if and only if, during the previous link negotiation, FLP Bursts were received.
.1.3.6.1.2.1.26.5.1.1.4,MAU-MIB::ifMauAutoNegConfig,INTEGER,read-only,,current,other(1):configuring(2):complete(3):disabled(4):parallelDetectFail(5),A value indicating the current status of the auto-negotiation process. The enumeration parallelDetectFail(5) maps to a failure in parallel detection as defined in 28.2.3.1 of [IEEE802.3].
.1.3.6.1.2.1.26.5.1.1.5,MAU-MIB::ifMauAutoNegCapability,Integer32,read-only,,deprecated,,********* THIS OBJECT IS DEPRECATED ********** This object has been deprecated in favour of ifMauAutoNegCapabilityBits. A value that uniquely identifies the set of capabilities of the local auto-negotiation entity. The value is a sum that initially takes the value zero. Then, for each capability of this interface, 2 raised to the power noted below is added to the sum. For example, an interface that has the capability to support only 100Base-TX half duplex would have a value of 32768 (2**15). In contrast, an interface that supports both 100Base-TX half duplex and 100Base-TX full duplex would have a value of 98304 ((2**15) + (2**16)). The powers of 2 assigned to the capabilities are these: Power Capability 0 other or unknown (1-9) (reserved) 10 10BASE-T half duplex mode 11 10BASE-T full duplex mode 12 (reserved) 13 (reserved) 14 100BASE-T4 15 100BASE-TX half duplex mode 16 100BASE-TX full duplex mode 17 (reserved) 18 (reserved) 19 100BASE-T2 half duplex mode 20 100BASE-T2 full duplex mode Note that interfaces that support this MIB may have capabilities that extend beyond the scope of this MIB.
.1.3.6.1.2.1.26.5.1.1.6,MAU-MIB::ifMauAutoNegCapAdvertised,Integer32,read-write,,deprecated,,********* THIS OBJECT IS DEPRECATED ********** This object has been deprecated in favour of ifMauAutoNegCapAdvertisedBits. A value that uniquely identifies the set of capabilities advertised by the local auto-negotiation entity. Refer to ifMauAutoNegCapability for a description of the possible values of this object. Capabilities in this object that are not available in ifMauAutoNegCapability cannot be enabled.
.1.3.6.1.2.1.26.5.1.1.7,MAU-MIB::ifMauAutoNegCapReceived,Integer32,read-only,,deprecated,,********* THIS OBJECT IS DEPRECATED ********** This object has been deprecated in favour of ifMauAutoNegCapReceivedBits. A value that uniquely identifies the set of capabilities received from the remote auto-negotiation entity. Refer to ifMauAutoNegCapability for a description of the possible values of this object. Note that interfaces that support this MIB may be attached to remote auto-negotiation entities that have capabilities beyond the scope of this MIB.
.1.3.6.1.2.1.26.5.1.1.8,MAU-MIB::ifMauAutoNegRestart,INTEGER,read-write,,current,restart(1):norestart(2),If the value of this object is set to restart(1) then this will force auto-negotiation to begin link renegotiation. If auto-negotiation signaling is disabled, a write to this object has no effect. Setting the value of this object to norestart(2) has no effect.
.1.3.6.1.2.1.26.5.1.1.9,MAU-MIB::ifMauAutoNegCapabilityBits,BITS,read-only,,current,bOther(0):b10baseT(1):b10baseTFD(2):b100baseT4(3):b100baseTX(4):b100baseTXFD(5):b100baseT2(6):b100baseT2FD(7):bFdxPause(8):bFdxAPause(9):bFdxSPause(10):bFdxBPause(11):b1000baseX(12):b1000baseXFD(13):b1000baseT(14):b1000baseTFD(15):b10GbaseT(16):b1000baseKX(17):b10GbaseKX4(18):b10GbaseKR(19):b40GbaseKR4(20):b40GbaseCR4(21):b100GbaseCR10(22):b1000baseT1(23):b25GbaseRS(24):b25GbaseR(25):bRSFEC25Greq(26):bBaseFEC25Greq(27):b25GbaseT(28):b40GbaseT(29):b100GbaseCR4(30):b100GbaseKR4(31):b100GbaseKP4(32):bForceMS(33),A value that uniquely identifies the set of capabilities of the local auto-negotiation entity. Note that interfaces that support this MIB may have capabilities that extend beyond the scope of this MIB. Note that the local auto-negotiation entity may support some capabilities beyond the scope of this MIB. This is indicated by returning the bit value bOther in addition to any bit values for standard capabilities that are listed in the IANAifMauAutoNegCapBits TC.
.1.3.6.1.2.1.26.5.1.1.10,MAU-MIB::ifMauAutoNegCapAdvertisedBits,BITS,read-write,,current,bOther(0):b10baseT(1):b10baseTFD(2):b100baseT4(3):b100baseTX(4):b100baseTXFD(5):b100baseT2(6):b100baseT2FD(7):bFdxPause(8):bFdxAPause(9):bFdxSPause(10):bFdxBPause(11):b1000baseX(12):b1000baseXFD(13):b1000baseT(14):b1000baseTFD(15):b10GbaseT(16):b1000baseKX(17):b10GbaseKX4(18):b10GbaseKR(19):b40GbaseKR4(20):b40GbaseCR4(21):b100GbaseCR10(22):b1000baseT1(23):b25GbaseRS(24):b25GbaseR(25):bRSFEC25Greq(26):bBaseFEC25Greq(27):b25GbaseT(28):b40GbaseT(29):b100GbaseCR4(30):b100GbaseKR4(31):b100GbaseKP4(32):bForceMS(33),A value that uniquely identifies the set of capabilities advertised by the local auto-negotiation entity. Capabilities in this object that are not available in ifMauAutoNegCapabilityBits cannot be enabled. Note that the local auto-negotiation entity may advertise some capabilities beyond the scope of this MIB. This is indicated by returning the bit value bOther in addition to any bit values for standard capabilities that are listed in the IANAifMauAutoNegCapBits TC.
.1.3.6.1.2.1.26.5.1.1.11,MAU-MIB::ifMauAutoNegCapReceivedBits,BITS,read-only,,current,bOther(0):b10baseT(1):b10baseTFD(2):b100baseT4(3):b100baseTX(4):b100baseTXFD(5):b100baseT2(6):b100baseT2FD(7):bFdxPause(8):bFdxAPause(9):bFdxSPause(10):bFdxBPause(11):b1000baseX(12):b1000baseXFD(13):b1000baseT(14):b1000baseTFD(15):b10GbaseT(16):b1000baseKX(17):b10GbaseKX4(18):b10GbaseKR(19):b40GbaseKR4(20):b40GbaseCR4(21):b100GbaseCR10(22):b1000baseT1(23):b25GbaseRS(24):b25GbaseR(25):bRSFEC25Greq(26):bBaseFEC25Greq(27):b25GbaseT(28):b40GbaseT(29):b100GbaseCR4(30):b100GbaseKR4(31):b100GbaseKP4(32):bForceMS(33),A value that uniquely identifies the set of capabilities received from the remote auto-negotiation entity. Note that interfaces that support this MIB may be attached to remote auto-negotiation entities that have capabilities beyond the scope of this MIB. This is indicated by returning the bit value bOther in addition to any bit values for standard capabilities that are listed in the IANAifMauAutoNegCapBits TC.
.1.3.6.1.2.1.26.5.1.1.12,MAU-MIB::ifMauAutoNegRemoteFaultAdvertised,INTEGER,read-write,,current,noError(1):offline(2):linkFailure(3):autoNegError(4),A value that identifies any local fault indications that this MAU has detected and will advertise at the next auto-negotiation interaction for 1000Mbps MAUs.
.1.3.6.1.2.1.26.5.1.1.13,MAU-MIB::ifMauAutoNegRemoteFaultReceived,INTEGER,read-only,,current,noError(1):offline(2):linkFailure(3):autoNegError(4),A value that identifies any fault indications received from the far end of a link by the local auto-negotiation entity for 1000Mbps MAUs.
.1.3.6.1.2.1.26.6,MAU-MIB::mauMod,,,,,,Management information for 802.3 MAUs. The following reference is used throughout this MIB module: [IEEE802.3] refers to: IEEE Std 802.3, 2005 Edition: 'IEEE Standard for Information technology - Telecommunications and information exchange between systems - Local and metropolitan area networks - Specific requirements - Part 3: Carrier sense multiple access with collision detection (CSMA/CD) access method and physical layer specifications'. Of particular interest is Clause 30, 'Management'. Copyright (C) The IETF Trust (2007). This version of this MIB module is part of RFC 4836; see the RFC itself for full legal notices.
.1.3.6.1.2.1.26.6.1,MAU-MIB::mauModConf,,,,,,
.1.3.6.1.2.1.26.6.1.1,MAU-MIB::mauModCompls,,,,,,
.1.3.6.1.2.1.26.6.1.1.1,MAU-MIB::mauModRpCompl,,,,,,******** THIS COMPLIANCE IS DEPRECATED ******** Compliance for MAUs attached to repeater ports. This compliance is deprecated and replaced by mauModRpCompl2, which corrects an oversight by allowing rpMauStatus to be implemented read-only.
.1.3.6.1.2.1.26.6.1.1.2,MAU-MIB::mauModIfCompl,,,,,,******** THIS COMPLIANCE IS DEPRECATED ******** Compliance for MAUs attached to interfaces. This compliance is deprecated and replaced by mauModIfCompl2.
.1.3.6.1.2.1.26.6.1.1.3,MAU-MIB::mauModIfCompl2,,,,,,******** THIS COMPLIANCE IS DEPRECATED ******** Compliance for MAUs attached to interfaces. This compliance is deprecated and replaced by mauModIfCompl3.
.1.3.6.1.2.1.26.6.1.1.4,MAU-MIB::mauModRpCompl2,,,,,,Compliance for MAUs attached to repeater ports. Note that compliance with this compliance statement requires compliance with the snmpRptrModCompl MODULE-COMPLIANCE statement of the SNMP-REPEATER-MIB (RFC 2108).
.1.3.6.1.2.1.26.6.1.1.5,MAU-MIB::mauModIfCompl3,,,,,,Compliance for MAUs attached to interfaces. Note that compliance with this compliance statement requires compliance with the ifCompliance3 MODULE-COMPLIANCE statement of the IF-MIB (RFC 2863) and the dot3Compliance2 MODULE-COMPLIANCE statement of the EtherLike-MIB (RFC3635).
.1.3.6.1.2.1.26.6.1.2,MAU-MIB::mauModObjGrps,,,,,,
.1.3.6.1.2.1.26.6.1.2.1,MAU-MIB::mauRpGrpBasic,,,,,,Basic conformance group for MAUs attached to repeater ports. This group is also the conformance specification for RFC 1515 implementations.
.1.3.6.1.2.1.26.6.1.2.2,MAU-MIB::mauRpGrp100Mbs,,,,,,Conformance group for MAUs attached to repeater ports with 100 Mb/s or greater capability.
.1.3.6.1.2.1.26.6.1.2.3,MAU-MIB::mauRpGrpJack,,,,,,Conformance group for MAUs attached to repeater ports with managed jacks.
.1.3.6.1.2.1.26.6.1.2.4,MAU-MIB::mauIfGrpBasic,,,,,,Basic conformance group for MAUs attached to interfaces. This group also provides a conformance specification for RFC 1515 implementations.
.1.3.6.1.2.1.26.6.1.2.5,MAU-MIB::mauIfGrp100Mbs,,,,,,********* THIS GROUP IS DEPRECATED ********** Conformance group for MAUs attached to interfaces with 100 Mb/s capability. This object group has been deprecated in favor of mauIfGrpHighCapacity.
.1.3.6.1.2.1.26.6.1.2.6,MAU-MIB::mauIfGrpJack,,,,,,Conformance group for MAUs attached to interfaces with managed jacks.
.1.3.6.1.2.1.26.6.1.2.7,MAU-MIB::mauIfGrpAutoNeg,,,,,,********* THIS GROUP IS DEPRECATED ********** Conformance group for MAUs attached to interfaces with managed auto-negotiation. This object group has been deprecated in favor of mauIfGrpAutoNeg2.
.1.3.6.1.2.1.26.6.1.2.8,MAU-MIB::mauBroadBasic,,,,,,********* THIS GROUP IS DEPRECATED ********** Conformance group for broadband MAUs attached to interfaces. This object group is deprecated. There have been no reported implementations of this group, and it was felt to be unlikely that there will be any future implementations.
.1.3.6.1.2.1.26.6.1.2.9,MAU-MIB::mauIfGrpHighCapacity,,,,,,Conformance group for MAUs attached to interfaces with 100 Mb/s or greater capability.
.1.3.6.1.2.1.26.6.1.2.10,MAU-MIB::mauIfGrpAutoNeg2,,,,,,Conformance group for MAUs attached to interfaces with managed auto-negotiation.
.1.3.6.1.2.1.26.6.1.2.11,MAU-MIB::mauIfGrpAutoNeg1000Mbps,,,,,,Conformance group for 1000Mbps MAUs attached to interfaces with managed auto-negotiation.
.1.3.6.1.2.1.26.6.1.2.12,MAU-MIB::mauIfGrpHCStats,,,,,,Conformance for high capacity statistics for MAUs attached to interfaces.
.1.3.6.1.2.1.26.6.1.3,MAU-MIB::mauModNotGrps,,,,,,
.1.3.6.1.2.1.26.6.1.3.1,MAU-MIB::rpMauNotifications,,,,,,Notifications for repeater MAUs.
.1.3.6.1.2.1.26.6.1.3.2,MAU-MIB::ifMauNotifications,,,,,,Notifications for interface MAUs.
.1.3.6.1.2.1.30,IANAifType-MIB::ianaifType,,,,,,This MIB module defines the IANAifType Textual Convention, and thus the enumerated values of the ifType object defined in MIB-II's ifTable.
.1.3.6.1.2.1.31,IF-MIB::ifMIB,,,,,,The MIB module to describe generic objects for network interface sub-layers. This MIB is an updated version of MIB-II's ifTable, and incorporates the extensions defined in RFC 1229.
.1.3.6.1.2.1.31.1,IF-MIB::ifMIBObjects,,,,,,
.1.3.6.1.2.1.31.1.1,IF-MIB::ifXTable,,not-accessible,,current,,A list of interface entries. The number of entries is given by the value of ifNumber. This table contains additional objects for the interface table.
.1.3.6.1.2.1.31.1.1.1,IF-MIB::ifXEntry,,not-accessible,,current,,An entry containing additional management information applicable to a particular interface.
.1.3.6.1.2.1.31.1.1.1.1,IF-MIB::ifName,OCTET,read-only,,current,,The textual name of the interface. The value of this object should be the name of the interface as assigned by the local device and should be suitable for use in commands entered at the device's `console'. This might be a text name, such as `le0' or a simple port number, such as `1', depending on the interface naming syntax of the device. If several entries in the ifTable together represent a single interface as named by the device, then each will have the same value of ifName. Note that for an agent which responds to SNMP queries concerning an interface on some other (proxied) device, then the value of ifName for such an interface is the proxied device's local name for it. If there is no local name, or this object is otherwise not applicable, then this object contains a zero-length string.
.1.3.6.1.2.1.31.1.1.1.2,IF-MIB::ifInMulticastPkts,Counter32,read-only,,current,,The number of packets, delivered by this sub-layer to a higher (sub-)layer, which were addressed to a multicast address at this sub-layer. For a MAC layer protocol, this includes both Group and Functional addresses. Discontinuities in the value of this counter can occur at re-initialization of the management system, and at other times as indicated by the value of ifCounterDiscontinuityTime.
.1.3.6.1.2.1.31.1.1.1.3,IF-MIB::ifInBroadcastPkts,Counter32,read-only,,current,,The number of packets, delivered by this sub-layer to a higher (sub-)layer, which were addressed to a broadcast address at this sub-layer. Discontinuities in the value of this counter can occur at re-initialization of the management system, and at other times as indicated by the value of ifCounterDiscontinuityTime.
.1.3.6.1.2.1.31.1.1.1.4,IF-MIB::ifOutMulticastPkts,Counter32,read-only,,current,,The total number of packets that higher-level protocols requested be transmitted, and which were addressed to a multicast address at this sub-layer, including those that were discarded or not sent. For a MAC layer protocol, this includes both Group and Functional addresses. Discontinuities in the value of this counter can occur at re-initialization of the management system, and at other times as indicated by the value of ifCounterDiscontinuityTime.
.1.3.6.1.2.1.31.1.1.1.5,IF-MIB::ifOutBroadcastPkts,Counter32,read-only,,current,,The total number of packets that higher-level protocols requested be transmitted, and which were addressed to a broadcast address at this sub-layer, including those that were discarded or not sent. Discontinuities in the value of this counter can occur at re-initialization of the management system, and at other times as indicated by the value of ifCounterDiscontinuityTime.
.1.3.6.1.2.1.31.1.1.1.6,IF-MIB::ifHCInOctets,Counter64,read-only,,current,,The total number of octets received on the interface, including framing characters. This object is a 64-bit version of ifInOctets. Discontinuities in the value of this counter can occur at re-initialization of the management system, and at other times as indicated by the value of ifCounterDiscontinuityTime.
.1.3.6.1.2.1.31.1.1.1.7,IF-MIB::ifHCInUcastPkts,Counter64,read-only,,current,,The number of packets, delivered by this sub-layer to a higher (sub-)layer, which were not addressed to a multicast or broadcast address at this sub-layer. This object is a 64-bit version of ifInUcastPkts. Discontinuities in the value of this counter can occur at re-initialization of the management system, and at other times as indicated by the value of ifCounterDiscontinuityTime.
.1.3.6.1.2.1.31.1.1.1.8,IF-MIB::ifHCInMulticastPkts,Counter64,read-only,,current,,The number of packets, delivered by this sub-layer to a higher (sub-)layer, which were addressed to a multicast address at this sub-layer. For a MAC layer protocol, this includes both Group and Functional addresses. This object is a 64-bit version of ifInMulticastPkts. Discontinuities in the value of this counter can occur at re-initialization of the management system, and at other times as indicated by the value of ifCounterDiscontinuityTime.
.1.3.6.1.2.1.31.1.1.1.9,IF-MIB::ifHCInBroadcastPkts,Counter64,read-only,,current,,The number of packets, delivered by this sub-layer to a higher (sub-)layer, which were addressed to a broadcast address at this sub-layer. This object is a 64-bit version of ifInBroadcastPkts. Discontinuities in the value of this counter can occur at re-initialization of the management system, and at other times as indicated by the value of ifCounterDiscontinuityTime.
.1.3.6.1.2.1.31.1.1.1.10,IF-MIB::ifHCOutOctets,Counter64,read-only,,current,,The total number of octets transmitted out of the interface, including framing characters. This object is a 64-bit version of ifOutOctets. Discontinuities in the value of this counter can occur at re-initialization of the management system, and at other times as indicated by the value of ifCounterDiscontinuityTime.
.1.3.6.1.2.1.31.1.1.1.11,IF-MIB::ifHCOutUcastPkts,Counter64,read-only,,current,,The total number of packets that higher-level protocols requested be transmitted, and which were not addressed to a multicast or broadcast address at this sub-layer, including those that were discarded or not sent. This object is a 64-bit version of ifOutUcastPkts. Discontinuities in the value of this counter can occur at re-initialization of the management system, and at other times as indicated by the value of ifCounterDiscontinuityTime.
.1.3.6.1.2.1.31.1.1.1.12,IF-MIB::ifHCOutMulticastPkts,Counter64,read-only,,current,,The total number of packets that higher-level protocols requested be transmitted, and which were addressed to a multicast address at this sub-layer, including those that were discarded or not sent. For a MAC layer protocol, this includes both Group and Functional addresses. This object is a 64-bit version of ifOutMulticastPkts. Discontinuities in the value of this counter can occur at re-initialization of the management system, and at other times as indicated by the value of ifCounterDiscontinuityTime.
.1.3.6.1.2.1.31.1.1.1.13,IF-MIB::ifHCOutBroadcastPkts,Counter64,read-only,,current,,The total number of packets that higher-level protocols requested be transmitted, and which were addressed to a broadcast address at this sub-layer, including those that were discarded or not sent. This object is a 64-bit version of ifOutBroadcastPkts. Discontinuities in the value of this counter can occur at re-initialization of the management system, and at other times as indicated by the value of ifCounterDiscontinuityTime.
.1.3.6.1.2.1.31.1.1.1.14,IF-MIB::ifLinkUpDownTrapEnable,INTEGER,read-write,,current,enabled(1):disabled(2),Indicates whether linkUp/linkDown traps should be generated for this interface. By default, this object should have the value enabled(1) for interfaces which do not operate on 'top' of any other interface (as defined in the ifStackTable), and disabled(2) otherwise.
.1.3.6.1.2.1.31.1.1.1.15,IF-MIB::ifHighSpeed,Gauge32,read-only,,current,,An estimate of the interface's current bandwidth in units of 1,000,000 bits per second. If this object reports a value of `n' then the speed of the interface is somewhere in the range of `n-500,000' to `n+499,999'. For interfaces which do not vary in bandwidth or for those where no accurate estimation can be made, this object should contain the nominal bandwidth. For a sub-layer which has no concept of bandwidth, this object should be zero.
.1.3.6.1.2.1.31.1.1.1.16,IF-MIB::ifPromiscuousMode,INTEGER,read-write,,current,true(1):false(2),This object has a value of false(2) if this interface only accepts packets/frames that are addressed to this station. This object has a value of true(1) when the station accepts all packets/frames transmitted on the media. The value true(1) is only legal on certain types of media. If legal, setting this object to a value of true(1) may require the interface to be reset before becoming effective. The value of ifPromiscuousMode does not affect the reception of broadcast and multicast packets/frames by the interface.
.1.3.6.1.2.1.31.1.1.1.17,IF-MIB::ifConnectorPresent,INTEGER,read-only,,current,true(1):false(2),This object has the value 'true(1)' if the interface sublayer has a physical connector and the value 'false(2)' otherwise.
.1.3.6.1.2.1.31.1.1.1.18,IF-MIB::ifAlias,OCTET,read-write,,current,,This object is an 'alias' name for the interface as specified by a network manager, and provides a non-volatile 'handle' for the interface. On the first instantiation of an interface, the value of ifAlias associated with that interface is the zero-length string. As and when a value is written into an instance of ifAlias through a network management set operation, then the agent must retain the supplied value in the ifAlias instance associated with the same interface for as long as that interface remains instantiated, including across all re- initializations/reboots of the network management system, including those which result in a change of the interface's ifIndex value. An example of the value which a network manager might store in this object for a WAN interface is the (Telco's) circuit number/identifier of the interface. Some agents may support write-access only for interfaces having particular values of ifType. An agent which supports write access to this object is required to keep the value in non-volatile storage, but it may limit the length of new values depending on how much storage is already occupied by the current values for other interfaces.
.1.3.6.1.2.1.31.1.1.1.19,IF-MIB::ifCounterDiscontinuityTime,TimeTicks,read-only,,current,,The value of sysUpTime on the most recent occasion at which any one or more of this interface's counters suffered a discontinuity. The relevant counters are the specific instances associated with this interface of any Counter32 or Counter64 object contained in the ifTable or ifXTable. If no such discontinuities have occurred since the last re- initialization of the local management subsystem, then this object contains a zero value.
.1.3.6.1.2.1.31.1.2,IF-MIB::ifStackTable,,not-accessible,,current,,The table containing information on the relationships between the multiple sub-layers of network interfaces. In particular, it contains information on which sub-layers run 'on top of' which other sub-layers, where each sub-layer corresponds to a conceptual row in the ifTable. For example, when the sub-layer with ifIndex value x runs over the sub-layer with ifIndex value y, then this table contains: ifStackStatus.x.y=active For each ifIndex value, I, which identifies an active interface, there are always at least two instantiated rows in this table associated with I. For one of these rows, I is the value of ifStackHigherLayer; for the other, I is the value of ifStackLowerLayer. (If I is not involved in multiplexing, then these are the only two rows associated with I.) For example, two rows exist even for an interface which has no others stacked on top or below it: ifStackStatus.0.x=active ifStackStatus.x.0=active 
.1.3.6.1.2.1.31.1.2.1,IF-MIB::ifStackEntry,,not-accessible,ifStackHigherLayer:ifStackLowerLayer,current,,Information on a particular relationship between two sub- layers, specifying that one sub-layer runs on 'top' of the other sub-layer. Each sub-layer corresponds to a conceptual row in the ifTable.
.1.3.6.1.2.1.31.1.2.1.1,IF-MIB::ifStackHigherLayer,Integer32,not-accessible,,current,,The value of ifIndex corresponding to the higher sub-layer of the relationship, i.e., the sub-layer which runs on 'top' of the sub-layer identified by the corresponding instance of ifStackLowerLayer. If there is no higher sub-layer (below the internetwork layer), then this object has the value 0.
.1.3.6.1.2.1.31.1.2.1.2,IF-MIB::ifStackLowerLayer,Integer32,not-accessible,,current,,The value of ifIndex corresponding to the lower sub-layer of the relationship, i.e., the sub-layer which runs 'below' the sub-layer identified by the corresponding instance of ifStackHigherLayer. If there is no lower sub-layer, then this object has the value 0.
.1.3.6.1.2.1.31.1.2.1.3,IF-MIB::ifStackStatus,INTEGER,read-create,,current,active(1):notInService(2):notReady(3):createAndGo(4):createAndWait(5):destroy(6),The status of the relationship between two sub-layers. Changing the value of this object from 'active' to 'notInService' or 'destroy' will likely have consequences up and down the interface stack. Thus, write access to this object is likely to be inappropriate for some types of interfaces, and many implementations will choose not to support write-access for any type of interface.
.1.3.6.1.2.1.31.1.3,IF-MIB::ifTestTable,,not-accessible,,deprecated,,This table contains one entry per interface. It defines objects which allow a network manager to instruct an agent to test an interface for various faults. Tests for an interface are defined in the media-specific MIB for that interface. After invoking a test, the object ifTestResult can be read to determine the outcome. If an agent can not perform the test, ifTestResult is set to so indicate. The object ifTestCode can be used to provide further test- specific or interface-specific (or even enterprise-specific) information concerning the outcome of the test. Only one test can be in progress on each interface at any one time. If one test is in progress when another test is invoked, the second test is rejected. Some agents may reject a test when a prior test is active on another interface. Before starting a test, a manager-station must first obtain 'ownership' of the entry in the ifTestTable for the interface to be tested. This is accomplished with the ifTestId and ifTestStatus objects as follows: try_again: get (ifTestId, ifTestStatus) while (ifTestStatus != notInUse) /* * Loop while a test is running or some other * manager is configuring a test. */ short delay get (ifTestId, ifTestStatus) } /* * Is not being used right now -- let's compete * to see who gets it. */ lock_value = ifTestId if ( set(ifTestId = lock_value, ifTestStatus = inUse, ifTestOwner = 'my-IP-address') == FAILURE) /* * Another manager got the ifTestEntry -- go * try again */ goto try_again; /* * I have the lock */ set up any test parameters. /* * This starts the test */ set(ifTestType = test_to_run); wait for test completion by polling ifTestResult when test completes, agent sets ifTestResult agent also sets ifTestStatus = 'notInUse' retrieve any additional test results, and ifTestId if (ifTestId == lock_value+1) results are valid A manager station first retrieves the value of the appropriate ifTestId and ifTestStatus objects, periodically repeating the retrieval if necessary, until the value of ifTestStatus is 'notInUse'. The manager station then tries to set the same ifTestId object to the value it just retrieved, the same ifTestStatus object to 'inUse', and the corresponding ifTestOwner object to a value indicating itself. If the set operation succeeds then the manager has obtained ownership of the ifTestEntry, and the value of the ifTestId object is incremented by the agent (per the semantics of TestAndIncr). Failure of the set operation indicates that some other manager has obtained ownership of the ifTestEntry. Once ownership is obtained, any test parameters can be setup, and then the test is initiated by setting ifTestType. On completion of the test, the agent sets ifTestStatus to 'notInUse'. Once this occurs, the manager can retrieve the results. In the (rare) event that the invocation of tests by two network managers were to overlap, then there would be a possibility that the first test's results might be overwritten by the second test's results prior to the first results being read. This unlikely circumstance ca
.1.3.6.1.2.1.31.1.3.1,IF-MIB::ifTestEntry,,not-accessible,,deprecated,,An entry containing objects for invoking tests on an interface.
.1.3.6.1.2.1.31.1.3.1.1,IF-MIB::ifTestId,INTEGER,read-write,,deprecated,,This object identifies the current invocation of the interface's test.
.1.3.6.1.2.1.31.1.3.1.2,IF-MIB::ifTestStatus,INTEGER,read-write,,deprecated,notInUse(1):inUse(2),This object indicates whether or not some manager currently has the necessary 'ownership' required to invoke a test on this interface. A write to this object is only successful when it changes its value from 'notInUse(1)' to 'inUse(2)'. After completion of a test, the agent resets the value back to 'notInUse(1)'.
.1.3.6.1.2.1.31.1.3.1.3,IF-MIB::ifTestType,OBJECT,read-write,,deprecated,,A control variable used to start and stop operator- initiated interface tests. Most OBJECT IDENTIFIER values assigned to tests are defined elsewhere, in association with specific types of interface. However, this document assigns a value for a full-duplex loopback test, and defines the special meanings of the subject identifier: noTest OBJECT IDENTIFIER ::= { 0 0 } When the value noTest is written to this object, no action is taken unless a test is in progress, in which case the test is aborted. Writing any other value to this object is only valid when no test is currently in progress, in which case the indicated test is initiated. When read, this object always returns the most recent value that ifTestType was set to. If it has not been set since the last initialization of the network management subsystem on the agent, a value of noTest is returned.
.1.3.6.1.2.1.31.1.3.1.4,IF-MIB::ifTestResult,INTEGER,read-only,,deprecated,none(1):success(2):inProgress(3):notSupported(4):unAbleToRun(5):aborted(6):failed(7),This object contains the result of the most recently requested test, or the value none(1) if no tests have been requested since the last reset. Note that this facility provides no provision for saving the results of one test when starting another, as could be required if used by multiple managers concurrently.
.1.3.6.1.2.1.31.1.3.1.5,IF-MIB::ifTestCode,OBJECT,read-only,,deprecated,,This object contains a code which contains more specific information on the test result, for example an error-code after a failed test. Error codes and other values this object may take are specific to the type of interface and/or test. The value may have the semantics of either the AutonomousType or InstancePointer textual conventions as defined in RFC 2579. The identifier: testCodeUnknown OBJECT IDENTIFIER ::= { 0 0 } is defined for use if no additional result code is available.
.1.3.6.1.2.1.31.1.3.1.6,IF-MIB::ifTestOwner,OCTET,read-write,,deprecated,,The entity which currently has the 'ownership' required to invoke a test on this interface.
.1.3.6.1.2.1.31.1.4,IF-MIB::ifRcvAddressTable,,not-accessible,,current,,This table contains an entry for each address (broadcast, multicast, or uni-cast) for which the system will receive packets/frames on a particular interface, except as follows: - for an interface operating in promiscuous mode, entries are only required for those addresses for which the system would receive frames were it not operating in promiscuous mode. - for 802.5 functional addresses, only one entry is required, for the address which has the functional address bit ANDed with the bit mask of all functional addresses for which the interface will accept frames. A system is normally able to use any unicast address which corresponds to an entry in this table as a source address.
.1.3.6.1.2.1.31.1.4.1,IF-MIB::ifRcvAddressEntry,,not-accessible,ifIndex:ifRcvAddressAddress,current,,A list of objects identifying an address for which the system will accept packets/frames on the particular interface identified by the index value ifIndex.
.1.3.6.1.2.1.31.1.4.1.1,IF-MIB::ifRcvAddressAddress,OCTET,not-accessible,,current,,An address for which the system will accept packets/frames on this entry's interface.
.1.3.6.1.2.1.31.1.4.1.2,IF-MIB::ifRcvAddressStatus,INTEGER,read-create,,current,active(1):notInService(2):notReady(3):createAndGo(4):createAndWait(5):destroy(6),This object is used to create and delete rows in the ifRcvAddressTable.
.1.3.6.1.2.1.31.1.4.1.3,IF-MIB::ifRcvAddressType,INTEGER,read-create,,current,other(1):volatile(2):nonVolatile(3),This object has the value nonVolatile(3) for those entries in the table which are valid and will not be deleted by the next restart of the managed system. Entries having the value volatile(2) are valid and exist, but have not been saved, so that will not exist after the next restart of the managed system. Entries having the value other(1) are valid and exist but are not classified as to whether they will continue to exist after the next restart.
.1.3.6.1.2.1.31.1.5,IF-MIB::ifTableLastChange,TimeTicks,read-only,,current,,The value of sysUpTime at the time of the last creation or deletion of an entry in the ifTable. If the number of entries has been unchanged since the last re-initialization of the local network management subsystem, then this object contains a zero value.
.1.3.6.1.2.1.31.1.6,IF-MIB::ifStackLastChange,TimeTicks,read-only,,current,,The value of sysUpTime at the time of the last change of the (whole) interface stack. A change of the interface stack is defined to be any creation, deletion, or change in value of any instance of ifStackStatus. If the interface stack has been unchanged since the last re-initialization of the local network management subsystem, then this object contains a zero value.
.1.3.6.1.2.1.31.2,IF-MIB::ifConformance,,,,,,
.1.3.6.1.2.1.31.2.1,IF-MIB::ifGroups,,,,,,
.1.3.6.1.2.1.31.2.1.1,IF-MIB::ifGeneralGroup,,,,,,A collection of objects deprecated in favour of ifGeneralInformationGroup.
.1.3.6.1.2.1.31.2.1.2,IF-MIB::ifFixedLengthGroup,,,,,,A collection of objects providing information specific to non-high speed (non-high speed interfaces transmit and receive at speeds less than or equal to 20,000,000 bits/second) character-oriented or fixed-length-transmission network interfaces.
.1.3.6.1.2.1.31.2.1.3,IF-MIB::ifHCFixedLengthGroup,,,,,,A collection of objects providing information specific to high speed (greater than 20,000,000 bits/second) character- oriented or fixed-length-transmission network interfaces.
.1.3.6.1.2.1.31.2.1.4,IF-MIB::ifPacketGroup,,,,,,A collection of objects providing information specific to non-high speed (non-high speed interfaces transmit and receive at speeds less than or equal to 20,000,000 bits/second) packet-oriented network interfaces.
.1.3.6.1.2.1.31.2.1.5,IF-MIB::ifHCPacketGroup,,,,,,A collection of objects providing information specific to high speed (greater than 20,000,000 bits/second but less than or equal to 650,000,000 bits/second) packet-oriented network interfaces.
.1.3.6.1.2.1.31.2.1.6,IF-MIB::ifVHCPacketGroup,,,,,,A collection of objects providing information specific to higher speed (greater than 650,000,000 bits/second) packet- oriented network interfaces.
.1.3.6.1.2.1.31.2.1.7,IF-MIB::ifRcvAddressGroup,,,,,,A collection of objects providing information on the multiple addresses which an interface receives.
.1.3.6.1.2.1.31.2.1.8,IF-MIB::ifTestGroup,,,,,,A collection of objects providing the ability to invoke tests on an interface.
.1.3.6.1.2.1.31.2.1.9,IF-MIB::ifStackGroup,,,,,,The previous collection of objects providing information on the layering of MIB-II interfaces.
.1.3.6.1.2.1.31.2.1.10,IF-MIB::ifGeneralInformationGroup,,,,,,A collection of objects providing information applicable to all network interfaces.
.1.3.6.1.2.1.31.2.1.11,IF-MIB::ifStackGroup2,,,,,,A collection of objects providing information on the layering of MIB-II interfaces.
.1.3.6.1.2.1.31.2.1.12,IF-MIB::ifOldObjectsGroup,,,,,,The collection of objects deprecated from the original MIB- II interfaces group.
.1.3.6.1.2.1.31.2.1.13,IF-MIB::ifCounterDiscontinuityGroup,,,,,,A collection of objects providing information specific to interface counter discontinuities.
.1.3.6.1.2.1.31.2.1.14,IF-MIB::linkUpDownNotificationsGroup,,,,,,The notifications which indicate specific changes in the value of ifOperStatus.
.1.3.6.1.2.1.31.2.2,IF-MIB::ifCompliances,,,,,,
.1.3.6.1.2.1.31.2.2.1,IF-MIB::ifCompliance,,,,,,A compliance statement defined in a previous version of this MIB module, for SNMP entities which have network interfaces.
.1.3.6.1.2.1.31.2.2.2,IF-MIB::ifCompliance2,,,,,,A compliance statement defined in a previous version of this MIB module, for SNMP entities which have network interfaces.
.1.3.6.1.2.1.31.2.2.3,IF-MIB::ifCompliance3,,,,,,The compliance statement for SNMP entities which have network interfaces.
.1.3.6.1.2.1.41,SNA-SDLC-MIB::snaDLC,,,,,,This is the MIB module for objects used to manage SDLC devices.
.1.3.6.1.2.1.41.1,SNA-SDLC-MIB::sdlc,,,,,,
.1.3.6.1.2.1.41.1.1,SNA-SDLC-MIB::sdlcPortGroup,,,,,,
.1.3.6.1.2.1.41.1.1.1,SNA-SDLC-MIB::sdlcPortAdminTable,,not-accessible,,current,,This table contains objects that can be changed to manage an SDLC port. Changing one of these parameters may take effect in the operating port immediately or may wait until the interface is restarted depending on the details of the implementation. Most of the objects in this read-write table have corresponding read-only objects in the sdlcPortOperTable that return the current operating value. The operating values may be different from these configured values if a configured parameter was changed after the interface was started.
.1.3.6.1.2.1.41.1.1.1.1,SNA-SDLC-MIB::sdlcPortAdminEntry,,not-accessible,ifIndex,current,,A list of configured values for an SDLC port.
.1.3.6.1.2.1.41.1.1.1.1.1,SNA-SDLC-MIB::sdlcPortAdminName,OCTET,read-write,,current,,An octet string that defines the physical port to which this interface is assigned. It has implementation-specific significance. Its value shall be unique within the administered system. It must contain only ASCII printable characters. Should an implementation choose to accept a write operation for this object, it causes the logical port definition associated with the table instance to be moved to a different physical port. A write operation shall not take effect until the port is cycled inactive.
.1.3.6.1.2.1.41.1.1.1.1.2,SNA-SDLC-MIB::sdlcPortAdminRole,INTEGER,read-write,,current,primary(1):secondary(2):negotiable(3),This object describes the role that the link station shall assume the next time a connection is established. Even though this is defined as a port object, it is a link station attribute in the sense that a role is per link station. However, it is not possible to vary link station roles on a particular port. For example, if an SDLC port is configured to primary, all link stations on that port must be primary.
.1.3.6.1.2.1.41.1.1.1.1.3,SNA-SDLC-MIB::sdlcPortAdminType,INTEGER,read-write,,current,leased(1):switched(2),This parameter defines whether the SDLC port is to connect to a leased or switched line. A write operation to this administrative value shall not take effect until the SDLC port has been cycled inactive.
.1.3.6.1.2.1.41.1.1.1.1.4,SNA-SDLC-MIB::sdlcPortAdminTopology,INTEGER,read-write,,current,pointToPoint(1):multipoint(2),This parameter defines whether the SDLC port is capable of operating in either a point-to-point or multipoint topology. sdlcPortAdminTopology == multipoint implies the port can also operate in a point-to-point topology. sdlcPortAdminTopology == pointToPoint does not imply the port can operate in a multipoint topology. A write operation to this administrative value shall not take effect until the SDLC port has been cycled inactive.
.1.3.6.1.2.1.41.1.1.1.1.5,SNA-SDLC-MIB::sdlcPortAdminISTATUS,INTEGER,read-write,,current,inactive(1):active(2),This parameter controls the initial value of the administrative status, ifAdminStatus, of this SDLC port at port start-up. Depending on the implementation, a write operation to this administrative object may not take effect until the SDLC port has been cycled inactive.
.1.3.6.1.2.1.41.1.1.1.1.6,SNA-SDLC-MIB::sdlcPortAdminACTIVTO,INTEGER,read-write,,current,,This parameter defines the period of time (in 1/100ths of a second) that the port will allow a switched line to remain inactive before disconnecting. A switched line is considered to be inactive if there are no I-Frames being transferred. A value of zero indicates no timeout. Depending on the implementation, a write operation to this administered value may not take effect until the port is cycled inactive. This object only has meaning for SDLC ports where sdlcPortAdminType == switched The object descriptor contains the name of an NCP configuration parameter, ACTIVTO. Please note that the value of this object represents 1/100ths of a second while the NCP ACTIVTO is represented in seconds.
.1.3.6.1.2.1.41.1.1.1.1.7,SNA-SDLC-MIB::sdlcPortAdminPAUSE,INTEGER,read-write,,current,,This object defines the minimum elapsed time (in 1/100ths of a second) between any two traversals of the poll list for a primary SDLC port. Depending on the implementation, a write operation to this administered value may not take effect until the port is cycled inactive. The object descriptor contains the name of an NCP configuration parameter, PAUSE. Please note that the value of this object represents 1/100ths of a second while the NCP PAUSE is represented in 1/10ths of a second. This object only has meaning for SDLC ports where sdlcPortAdminRole == primary 
.1.3.6.1.2.1.41.1.1.1.1.8,SNA-SDLC-MIB::sdlcPortAdminSERVLIM,Integer32,read-write,,current,,This object defines the number of times the active poll list will be traversed before polling a station on the slow poll list for a primary, multipoint SDLC port. Depending on the implementation, a write operation to this administered value may not take effect until the port is cycled inactive. This object only has meaning for SDLC ports where sdlcPortAdminRole == primary and sdlcPortAdminTopology == multipoint 
.1.3.6.1.2.1.41.1.1.1.1.9,SNA-SDLC-MIB::sdlcPortAdminSlowPollTimer,INTEGER,read-write,,current,,This object describes the elapsed time (in 1/100ths of a second) between polls for failed secondary link station addresses. Depending on the implementation, a write operation to this administered value may not take effect until the port is cycled inactive. This object only has meaning for SDLC ports where sdlcPortAdminRole == primary and sdlcPortAdminTopology == multipoint 
.1.3.6.1.2.1.41.1.1.2,SNA-SDLC-MIB::sdlcPortOperTable,,not-accessible,,current,,This table contains current SDLC port parameters. Many of these objects have corresponding objects inthe sdlcPortAdminTable.
.1.3.6.1.2.1.41.1.1.2.1,SNA-SDLC-MIB::sdlcPortOperEntry,,not-accessible,ifIndex,current,,Currently set parameters for a specific SDLC port.
.1.3.6.1.2.1.41.1.1.2.1.1,SNA-SDLC-MIB::sdlcPortOperName,OCTET,read-only,,current,,An octet string that describes the physical port to which this interface is currently attached. It has implementation-specific significance.
.1.3.6.1.2.1.41.1.1.2.1.2,SNA-SDLC-MIB::sdlcPortOperRole,INTEGER,read-only,,current,primary(1):secondary(2):undefined(3),This object describes the role that the link station has assumed on this connection. Even though this is defined as a port object, it is a link station attribute in the sense that a role is per link station. However, it is not possible to vary link station roles on a particular port. For example, if an SDLC port is configured to primary, all link stations on that port must be primary. The value of sdlcPortOperRole is undefined(3) whenever the link station role has not yet been established by the mode setting command.
.1.3.6.1.2.1.41.1.1.2.1.3,SNA-SDLC-MIB::sdlcPortOperType,INTEGER,read-only,,current,leased(1):switched(2),This parameter defines whether the SDLC port is currently operating as though connected to a leased or switched line.
.1.3.6.1.2.1.41.1.1.2.1.4,SNA-SDLC-MIB::sdlcPortOperTopology,INTEGER,read-only,,current,pointToPoint(1):multipoint(2),This parameter defines whether the SDLC port is currently operating in a point-to-point or multipoint topology.
.1.3.6.1.2.1.41.1.1.2.1.5,SNA-SDLC-MIB::sdlcPortOperISTATUS,INTEGER,read-only,,current,inactive(1):active(2),This parameter describes the initial value of the administrative status, ifAdminStatus, of this SDLC port at last port start-up.
.1.3.6.1.2.1.41.1.1.2.1.6,SNA-SDLC-MIB::sdlcPortOperACTIVTO,INTEGER,read-only,,current,,This parameter defines the period of time (in 100ths of a second) that the port will allow a switched line to remain inactive before disconnecting. A switched line is considered to be inactive if there are no I-Frames being transferred. The object descriptor contains the name of an NCP configuration parameter, ACTIVTO. Please note that the value of this object represents 1/100ths of a second while the NCP ACTIVTO is represented in seconds. A value of zero indicates no timeout.
.1.3.6.1.2.1.41.1.1.2.1.7,SNA-SDLC-MIB::sdlcPortOperPAUSE,INTEGER,read-only,,current,,This object describes the current minimum elapsed time (in 1/100ths of a second) between any two traversals of the poll list for a primary SDLC port. The object descriptor contains the name of an NCP configuration parameter, PAUSE. Please note that the value of this object represents 1/100ths of a second while the NCP PAUSE is represented in 1/10ths of a second. This object only has meaning for SDLC ports where sdlcPortAdminRole == primary 
.1.3.6.1.2.1.41.1.1.2.1.8,SNA-SDLC-MIB::sdlcPortOperSlowPollMethod,INTEGER,read-only,,current,servlim(1):pollpause(2):other(3),This object defines the exact method that is in effect for periodically polling failed secondary link station addresses. If sdlcPortOperSlowPollMethod == servlim, then sdlcPortOperSERVLIM defines the actual polling characteristics. If sdlcPortOperSlowPollMethod == pollpause, then sdlcPortOperSlowPollTimer defines the actual polling characteristics. If sdlcPortOperSlowPollMethod == other, then the polling characteristics are modeled in vendor-specific objects. This object only has meaning for SDLC ports where sdlcPortOperRole == primary and sdlcPortOperTopology == multipoint 
.1.3.6.1.2.1.41.1.1.2.1.9,SNA-SDLC-MIB::sdlcPortOperSERVLIM,Integer32,read-only,,current,,This object describes the number of times the active poll list is currently being traversed before polling a station on the slow poll list for a primary, multipoint SDLC port. This object only has meaning for SDLC ports where sdlcPortOperRole == primary and sdlcPortOperTopology == multipoint 
.1.3.6.1.2.1.41.1.1.2.1.10,SNA-SDLC-MIB::sdlcPortOperSlowPollTimer,INTEGER,read-only,,current,,This object describes the elapsed time (in 1/100ths of a second) between polls for failed secondary link station addresses. This object only has meaning for SDLC ports where sdlcPortOperRole == primary and sdlcPortOperTopology == multipoint 
.1.3.6.1.2.1.41.1.1.2.1.11,SNA-SDLC-MIB::sdlcPortOperLastModifyTime,TimeTicks,read-only,,current,,This object describes the value of sysUpTime when this port definition was last modified. If the port has not been modified, then this value shall be zero.
.1.3.6.1.2.1.41.1.1.2.1.12,SNA-SDLC-MIB::sdlcPortOperLastFailTime,TimeTicks,read-only,,current,,This object describes the value of sysUpTime when this SDLC port last failed. If the port has not failed, then this value shall be zero.
.1.3.6.1.2.1.41.1.1.2.1.13,SNA-SDLC-MIB::sdlcPortOperLastFailCause,INTEGER,read-only,,current,undefined(1):physical(2),This enumerated object describes the cause of the last failure of this SDLC port. If the port has not failed, then this object has a value of undefined(1).
.1.3.6.1.2.1.41.1.1.3,SNA-SDLC-MIB::sdlcPortStatsTable,,not-accessible,,current,,Each entry in this table contains statistics for a specific SDLC port.
.1.3.6.1.2.1.41.1.1.3.1,SNA-SDLC-MIB::sdlcPortStatsEntry,,not-accessible,ifIndex,current,,A list of statistics for an SDLC port.
.1.3.6.1.2.1.41.1.1.3.1.1,SNA-SDLC-MIB::sdlcPortStatsPhysicalFailures,Counter32,read-only,,current,,This object reflects the total number of times this port has failed due to its physical media since port startup. At port startup time, this object must be initialized to zero.
.1.3.6.1.2.1.41.1.1.3.1.2,SNA-SDLC-MIB::sdlcPortStatsInvalidAddresses,Counter32,read-only,,current,,This object reflects the total number of frames received by this port with invalid link station addresses.
.1.3.6.1.2.1.41.1.1.3.1.3,SNA-SDLC-MIB::sdlcPortStatsDwarfFrames,Counter32,read-only,,current,,This object reflects the total number of frames received by this port which were delivered intact by the physical layer but were too short to be legal. Ignoring the frame check sequence (FCS), a frame is considered to be too short if it is less than 2 bytes for sdlcLSOperMODULO of eight, or if it is less than 3 bytes for sdlcLSOperMODULO of onetwentyeight.
.1.3.6.1.2.1.41.1.1.3.1.4,SNA-SDLC-MIB::sdlcPortStatsPollsIn,Counter32,read-only,,current,,This object reflects the total number of polls received by this port since the port was created.
.1.3.6.1.2.1.41.1.1.3.1.5,SNA-SDLC-MIB::sdlcPortStatsPollsOut,Counter32,read-only,,current,,This object reflects the total number of polls sent by this port since the port was created.
.1.3.6.1.2.1.41.1.1.3.1.6,SNA-SDLC-MIB::sdlcPortStatsPollRspsIn,Counter32,read-only,,current,,This object reflects the total number of poll responses received by this port since the port was created.
.1.3.6.1.2.1.41.1.1.3.1.7,SNA-SDLC-MIB::sdlcPortStatsPollRspsOut,Counter32,read-only,,current,,This object reflects the total number of poll responses sent by this port since the port was created.
.1.3.6.1.2.1.41.1.1.3.1.8,SNA-SDLC-MIB::sdlcPortStatsLocalBusies,Counter32,read-only,,current,,This object reflects the total number of times that the local SDLC link stations on this port have entered a busy state (RNR). This object is initialized to zero when the port is created.
.1.3.6.1.2.1.41.1.1.3.1.9,SNA-SDLC-MIB::sdlcPortStatsRemoteBusies,Counter32,read-only,,current,,This object reflects the total number of times that the adjacent (i.e., remote) SDLC link stations on this port have entered a busy state (RNR). This object is initialized to zero when the port is created.
.1.3.6.1.2.1.41.1.1.3.1.10,SNA-SDLC-MIB::sdlcPortStatsIFramesIn,Counter32,read-only,,current,,This object reflects the total number of I-Frames that have been received by SDLC link stations on this port. This object is initialized to zero when the port is created.
.1.3.6.1.2.1.41.1.1.3.1.11,SNA-SDLC-MIB::sdlcPortStatsIFramesOut,Counter32,read-only,,current,,This object reflects the total number of I-Frames that have been transmitted by SDLC link stations on this port. This object is initialized to zero when the port is created.
.1.3.6.1.2.1.41.1.1.3.1.12,SNA-SDLC-MIB::sdlcPortStatsOctetsIn,Counter32,read-only,,current,,This object reflects the total octets received from adjacent SDLC link stations on this port. This object covers the address, control, and information field of I-Frames only. This object is initialized to zero when the port is created.
.1.3.6.1.2.1.41.1.1.3.1.13,SNA-SDLC-MIB::sdlcPortStatsOctetsOut,Counter32,read-only,,current,,This object reflects the total octets transmitted to adjacent SDLC link stations on this port. This object covers the address, control, and information field of I-Frames only. This object is initialized to zero when the port is created.
.1.3.6.1.2.1.41.1.1.3.1.14,SNA-SDLC-MIB::sdlcPortStatsProtocolErrs,Counter32,read-only,,current,,This object reflects the total number of times that the SDLC link stations on this port have deactivated the link as a result of having received a protocol violation from the adjacent link station. This object is initialized to zero when the port is created.
.1.3.6.1.2.1.41.1.1.3.1.15,SNA-SDLC-MIB::sdlcPortStatsActivityTOs,Counter32,read-only,,current,,This object reflects the total number of times that the SDLC link stations on this port have deactivated the link as a result of no activity on the link. This object is initialized to zero when the port is created.
.1.3.6.1.2.1.41.1.1.3.1.16,SNA-SDLC-MIB::sdlcPortStatsRNRLIMITs,Counter32,read-only,,current,,This object reflects the total number of times that the SDLC link stations on this port have deactivated the link as a result of its RNRLIMIT timer expiring. This object is initialized to zero when the port is created.
.1.3.6.1.2.1.41.1.1.3.1.17,SNA-SDLC-MIB::sdlcPortStatsRetriesExps,Counter32,read-only,,current,,This object reflects the total number of times that the SDLC link stations on this port have deactivated the link as a result of a retry sequence being exhausted. This object is initialized to zero when the port is created.
.1.3.6.1.2.1.41.1.1.3.1.18,SNA-SDLC-MIB::sdlcPortStatsRetransmitsIn,Counter32,read-only,,current,,This object reflects the total number of I-Frames retransmitted by remote link stations for all SDLC link stations on this port. This object is initialized to zero when the port is created.
.1.3.6.1.2.1.41.1.1.3.1.19,SNA-SDLC-MIB::sdlcPortStatsRetransmitsOut,Counter32,read-only,,current,,This object reflects the total number of I-Frames retransmitted by all local SDLC link stations on this port. This object is initialized to zero when the port is created.
.1.3.6.1.2.1.41.1.2,SNA-SDLC-MIB::sdlcLSGroup,,,,,,
.1.3.6.1.2.1.41.1.2.1,SNA-SDLC-MIB::sdlcLSAdminTable,,not-accessible,,current,,This table contains objects that can be changed to manage an SDLC link station. Changing one of these parameters may take effect in the operating link immediately or may wait until the link is restarted depending on the details of the implementation. The entries in sdlcLSAdminTable can be created either by an agent or a management station. The management station can create an entry in sdlcLSAdminTable by setting the appropriate value in sdlcLSAdminRowStatus. Most of the objects in this read-create table have corresponding read-only objects in the sdlcLSOperTable that reflect the current operating value. The operating values may be different from these configured values if changed by XID negotiation or if a configured parameter was changed after the link was started.
.1.3.6.1.2.1.41.1.2.1.1,SNA-SDLC-MIB::sdlcLSAdminEntry,,not-accessible,ifIndex:sdlcLSAddress,current,,A list of configured values for an SDLC link station.
.1.3.6.1.2.1.41.1.2.1.1.1,SNA-SDLC-MIB::sdlcLSAddress,INTEGER,read-create,,current,,This value is the poll address of the secondary link station for this SDLC link. It uniquely identifies the SDLC link station within a single SDLC port.
.1.3.6.1.2.1.41.1.2.1.1.2,SNA-SDLC-MIB::sdlcLSAdminName,OCTET,read-create,,current,,An octet string that defines the local name of the SDLC link station. This field may be sent in the XID3 control vector 0x0E, type 0xF7.
.1.3.6.1.2.1.41.1.2.1.1.3,SNA-SDLC-MIB::sdlcLSAdminState,INTEGER,read-create,,current,inactive(1):active(2),This object controls the desired state of the SDLC station. The managed system shall attempt to keep the operational state, sdlcLSOperState, consistent with this value.
.1.3.6.1.2.1.41.1.2.1.1.4,SNA-SDLC-MIB::sdlcLSAdminISTATUS,INTEGER,read-create,,current,inactive(1):active(2),This parameter controls the desired state, sdlcLSAdminState, of the SDLC link station at link station start-up.
.1.3.6.1.2.1.41.1.2.1.1.5,SNA-SDLC-MIB::sdlcLSAdminMAXDATASend,Integer32,read-create,,current,,This object contains the maximum PDU size that the local link station thinks it can send to the adjacent link station before having received any XID from the ALS. After the maximum PDU size that the ALS can receive is known (via XID exchange) that value is reflected in sdlcLSOperMAXDATASend and takes precedence over this object. This value includes the Transmission Header (TH) and the Request Header (RH).
.1.3.6.1.2.1.41.1.2.1.1.6,SNA-SDLC-MIB::sdlcLSAdminMAXDATARcv,Integer32,read-create,,current,,This object contains the maximum PDU size that the local link station can receive from the adjacent link station. This value is sent in the XID to the ALS. This value includes the Transmission Header (TH) and the Request Header (RH).
.1.3.6.1.2.1.41.1.2.1.1.7,SNA-SDLC-MIB::sdlcLSAdminREPLYTO,INTEGER,read-create,,current,,This object controls the reply timeout (in 1/100ths of a second) for an SDLC link station. If the link station does not receive a response to a poll or message before the specified time expires then the appropriate error recovery shall be initiated. The object descriptor contains the name of an NCP configuration parameter, REPLYTO. Please note that the value of this object represents 1/100ths of a second while the NCP REPLYTO is represented in 1/10ths of a second. Depending on the implementation, a write operation to this administered value may not change the operational value, sdlcLSOperREPLYTO, until the link station is cycled inactive. This object only has meaning for SDLC ports where sdlcPortAdminRole == primary 
.1.3.6.1.2.1.41.1.2.1.1.8,SNA-SDLC-MIB::sdlcLSAdminMAXIN,INTEGER,read-create,,current,,This object controls the maximum number of unacknowledged I-frames which an SDLC link station may receive. This should range from 1 to (sdlcLSAdminMODULO - 1). This value is sent in the XID to the ALS. A write operation to this administered value will not change the operational value, sdlcLSOperMAXIN, until the link station is cycled inactive.
.1.3.6.1.2.1.41.1.2.1.1.9,SNA-SDLC-MIB::sdlcLSAdminMAXOUT,INTEGER,read-create,,current,,This object controls the maximum number of consecutive unacknowledged I-frames which an SDLC link station shall send without an acknowledgement. This shall range from 1 to (sdlcLSAdminMODULO - 1). For link stations on switched SDLC lines, certain implementions may choose to override this administered value with the value received in the XID exchange. Depending on the implementation, a write operation to this administered value may not change the operational value, sdlcLSOperMAXOUT, until the link station is cycled inactive. An implementation can support only modulo 8, only modulo 128, or both.
.1.3.6.1.2.1.41.1.2.1.1.10,SNA-SDLC-MIB::sdlcLSAdminMODULO,INTEGER,read-create,,current,eight(8):onetwentyeight(128),This object controls the modulus for an SDLC link station. This modulus determines the size of the rotating acknowledgement window used the SDLC link station pair. A write operation to this administered value will not change the operational value, sdlcLSOperMODULO, until the link station is cycled inactive. An implementation can support only modulo 8, only modulo 128, or both.
.1.3.6.1.2.1.41.1.2.1.1.11,SNA-SDLC-MIB::sdlcLSAdminRETRIESm,INTEGER,read-create,,current,,This object controls number of retries in a retry sequence for the local SDLC link station. A retry sequence is a series of retransmitted frames ( data or control) for which no positive acknowledgement is received. The number of times that the retry sequence is to be repeated is controlled by the object: sdlcLSAdminRETRIESn. The interval between retry sequences is controlled by the object: sdlcLSAdminRETRIESt. A value of zero indicates no retries. If the value of sdlcLSAdminRETRIESm is zero, then the values of sdlcLSAdminRETRIESt and sdlcLSAdminRETRIESn should also be zero. Depending on the implementation, a write operation to this administered value may not change the operational value, sdlcLSOperRETRIESm, until the link station is cycled inactive.
.1.3.6.1.2.1.41.1.2.1.1.12,SNA-SDLC-MIB::sdlcLSAdminRETRIESt,INTEGER,read-create,,current,,This object controls the interval (in 1/100ths of a second) between retry sequences for the local SDLC link station if multiple retry sequences are specified . A retry sequence is a series of retransmitted frames ( data or control) for which no positive acknowledgement is received. The number of repeated retries sequences is controlled by the object: sdlcLSAdminRETRIESn. The retries per sequence is controlled by the object: sdlcLSAdminRETRIESm. The object descriptor contains the name of an NCP configuration parameter, RETRIESt. Please note that the value of this object represents 1/100ths of a second while the NCP RETRIESt is represented in seconds. Depending on the implementation, a write operation to this administered value may not change the operational value, sdlcLSOperRETRIESt, until the link station is cycled inactive.
.1.3.6.1.2.1.41.1.2.1.1.13,SNA-SDLC-MIB::sdlcLSAdminRETRIESn,Integer32,read-create,,current,,This object controls the number of times that a retry sequence is repeated for the local SDLC link station. A retry sequence is a series of retransmitted frames ( data or control) for which no positive acknowledgement is received. The interval between retry sequences is controlled by the object: sdlcLSAdminRETRIESn. The retries per sequence is controlled by the object: sdlcLSAdminRETRIESm. Depending on the implementation, a write operation to this administered value may not change the operational value, sdlcLSOperRETRIESn, until the link station is cycled inactive.
.1.3.6.1.2.1.41.1.2.1.1.14,SNA-SDLC-MIB::sdlcLSAdminRNRLIMIT,INTEGER,read-create,,current,,This object controls the length of time (in 1/100ths of a second) that an SDLC link station will allow its adjacent link station to remain in a busy (RNR) state before declaring it inoperative. A value of sdlcLSAdminRNRLIMIT == 0 means there is no limit. The object descriptor contains the name of an NCP configuration parameter, RNRLIMIT. Please note that the value of this object represents 1/100ths of a second while the NCP RNRLIMIT is represented in minutes. Depending on the implementation, a write operation to this administered value may not change the operational value, sdlcLSOperRNRLIMIT, until the link station is cycled inactive.
.1.3.6.1.2.1.41.1.2.1.1.15,SNA-SDLC-MIB::sdlcLSAdminDATMODE,INTEGER,read-create,,current,half(1):full(2),This object controls whether communications mode with the adjacent link station is two-way-alternate (half) or two-way-simultaneous (full). A write operation to this administered value will not change the operational value, sdlcLSOperDATMODE, until the link station is cycled inactive.
.1.3.6.1.2.1.41.1.2.1.1.16,SNA-SDLC-MIB::sdlcLSAdminGPoll,INTEGER,read-create,,current,,This object describes the group poll address for this link station instance. If group poll is not in effect for this link station instance, the value for sdlcLSAdminGPoll should be zero. Depending on the implementation, a write operation to this administered value may not change the operational value, sdlcLSOperGPoll, until the link station is cycled inactive.
.1.3.6.1.2.1.41.1.2.1.1.17,SNA-SDLC-MIB::sdlcLSAdminSimRim,INTEGER,read-create,,current,no(1):yes(2),This object controls the support for transmission and receipt of SIM and RIM control frames for this link station. The value of this object controls the setting of the transmit-receive capability sent in the XID field.
.1.3.6.1.2.1.41.1.2.1.1.18,SNA-SDLC-MIB::sdlcLSAdminXmitRcvCap,INTEGER,read-create,,current,twa(1):tws(2),This object controls the transmit-receive capabilities for this SDLC link station. The value of this object establishes the value of the transmit-receive capability indicator sent in the XID image to the adjacent link station.
.1.3.6.1.2.1.41.1.2.1.1.19,SNA-SDLC-MIB::sdlcLSAdminRowStatus,INTEGER,read-create,,current,active(1):notInService(2):notReady(3):createAndGo(4):createAndWait(5):destroy(6),This object is used by a management station to create or delete the row entry in sdlcLSAdminTable following the RowStatus textual convention. Upon successful creation of the row, an agent automatically creates a corresponding entry in the sdlcLSOperTable with sdlcLSOperState equal to 'discontacted (1)'.
.1.3.6.1.2.1.41.1.2.2,SNA-SDLC-MIB::sdlcLSOperTable,,not-accessible,,current,,This table contains current SDLC link parameters. Many of these objects have corresponding objects in the sdlcLSAdminTable.
.1.3.6.1.2.1.41.1.2.2.1,SNA-SDLC-MIB::sdlcLSOperEntry,,not-accessible,ifIndex:sdlcLSAddress,current,,A list of status and control values for an SDLC link station.
.1.3.6.1.2.1.41.1.2.2.1.1,SNA-SDLC-MIB::sdlcLSOperName,OCTET,read-only,,current,,An octet string that defines the name of the remote SDLC link station. This field is received in the XID3 control vector 0x0E, type 0xF7.
.1.3.6.1.2.1.41.1.2.2.1.2,SNA-SDLC-MIB::sdlcLSOperRole,INTEGER,read-only,,current,primary(1):secondary(2):undefined(3),This object reflects the current role that the link station is assuming. The value of sdlcLSOperRole is undefined(3) whenever the link station role has not yet been established by the mode setting command.
.1.3.6.1.2.1.41.1.2.2.1.3,SNA-SDLC-MIB::sdlcLSOperState,INTEGER,read-only,,current,discontacted(1):contactPending(2):contacted(3):discontactPending(4),This object describes the operational state of the SDLC link station. The managed system shall attempt to keep this value consistent with the administered state, sdlcLSAdminState
.1.3.6.1.2.1.41.1.2.2.1.4,SNA-SDLC-MIB::sdlcLSOperMAXDATASend,Integer32,read-only,,current,,This object contains the actual maximum PDU size that the local link station can send to the adjacent link station. This object is established from the value received in the XID from the adjacent link station. If no XID is received, then this value is implementation dependent (for instance, it could be the value of sdlcLSAdminMAXDATASend). This value includes the Transmission Header (TH) and the Request Header (RH).
.1.3.6.1.2.1.41.1.2.2.1.5,SNA-SDLC-MIB::sdlcLSOperREPLYTO,INTEGER,read-only,,current,,This object reflects the current reply timeout (in 1/100ths of a second) for an SDLC link station. If the link station does not receive a response to a poll or message before the specified time expires then the appropriate error recovery shall be initiated. The object descriptor contains the name of an NCP configuration parameter, REPLYTO. Please note that the value of this object represents 1/100ths of a second while the NCP REPLYTO is represented in 1/10ths of a second. This object only has meaning for SDLC ports where sdlcPortOperRole == primary 
.1.3.6.1.2.1.41.1.2.2.1.6,SNA-SDLC-MIB::sdlcLSOperMAXIN,INTEGER,read-only,,current,,This object reflects the current maximum number of unacknowledged I-frames which an SDLC link station may receive. This shall range from 1 to (sdlcLSOperMODULO - 1).
.1.3.6.1.2.1.41.1.2.2.1.7,SNA-SDLC-MIB::sdlcLSOperMAXOUT,INTEGER,read-only,,current,,This object controls the maximum number of consecutive unacknowledged I-frames which an SDLC link station shall send without an acknowledgement. This shall range from 1 to (sdlcLSAdminMODULO - 1). This value may controlled by the administered MAXOUT, sdlcLSAdminMAXOUT, or by the MAXIN value received during the XID exchange.
.1.3.6.1.2.1.41.1.2.2.1.8,SNA-SDLC-MIB::sdlcLSOperMODULO,INTEGER,read-only,,current,eight(8):onetwentyeight(128),This object reflects the current modulus for an SDLC link station. This modulus determines the size of rotating acknowledgement window used by the SDLC link station pair.
.1.3.6.1.2.1.41.1.2.2.1.9,SNA-SDLC-MIB::sdlcLSOperRETRIESm,INTEGER,read-only,,current,,This object controls number of retries in a retry sequence for an SDLC link station. A retry sequence is a series of retransmitted frames ( data or control) for which no positive acknowledgement is received. The current number of times that the retry sequence is to be repeated is reflected by the object: sdlcLSOperRETRIESn. The current interval between retry sequences is reflected by the object: sdlcLSOperRETRIESt.
.1.3.6.1.2.1.41.1.2.2.1.10,SNA-SDLC-MIB::sdlcLSOperRETRIESt,INTEGER,read-only,,current,,This object reflects the current interval (in 1/100ths of a second) between retry sequences for an SDLC link station if multiple retry sequences are specified. A retry sequence is a series of retransmitted frames ( data or control) for which no positive acknowledgement is received. The object descriptor contains the name of an NCP configuration parameter, RETRIESt. Please note that the value of this object represents 1/100ths of a second while the NCP RETRIESt is represented in seconds. The current number of repeated retries sequences is reflected by the object: sdlcLSOperRETRIESn. The current retries per sequence is reflected by the object: sdlcLSOperRETRIESm.
.1.3.6.1.2.1.41.1.2.2.1.11,SNA-SDLC-MIB::sdlcLSOperRETRIESn,INTEGER,read-only,,current,,This object reflects the current number of times that a retry sequence is repeated for an SDLC link station. A retry sequence is a series of retransmitted frames ( data or control) for which no positive acknowledgement is received. The current interval between retry sequences is reflected by the object: sdlcLSOperRETRIESn. The current retries per sequence is reflected by the object: sdlcLSOperRETRIESm.
.1.3.6.1.2.1.41.1.2.2.1.12,SNA-SDLC-MIB::sdlcLSOperRNRLIMIT,INTEGER,read-only,,current,,This object reflects the current length of time (in 1/100ths of a second) that an SDLC link station will allow its adjacent link station to remain in a busy (RNR) state before declaring it inoperative. The object descriptor contains the name of an NCP configuration parameter, RNRLIMIT. Please note that the value of this object represents 1/100ths of a second while the NCP RNRLIMIT is represented in minutes. A value of sdlcLSOperRNRLIMIT == 0 means there is no limit.
.1.3.6.1.2.1.41.1.2.2.1.13,SNA-SDLC-MIB::sdlcLSOperDATMODE,INTEGER,read-only,,current,half(1):full(2),This object reflects whether the current communications mode with the adjacent link station is two-way-alternate (half) or two-way-simultaneous (full).
.1.3.6.1.2.1.41.1.2.2.1.14,SNA-SDLC-MIB::sdlcLSOperLastModifyTime,TimeTicks,read-only,,current,,This object describes the value of sysUpTime when this link station definition was last modified. If the link station has not been modified, then this value shall be zero.
.1.3.6.1.2.1.41.1.2.2.1.15,SNA-SDLC-MIB::sdlcLSOperLastFailTime,TimeTicks,read-only,,current,,This object describes the value of sysUpTime when this SDLC link station last failed. If the link station has not failed, then this value shall be zero.
.1.3.6.1.2.1.41.1.2.2.1.16,SNA-SDLC-MIB::sdlcLSOperLastFailCause,INTEGER,read-only,,current,undefined(1):rxFRMR(2):txFRMR(3):noResponse(4):protocolErr(5):noActivity(6):rnrLimit(7):retriesExpired(8),This enumerated object reflects the cause of the last failure of this SDLC link station. If the link station has not failed, then this object will have a value of undefined(1).
.1.3.6.1.2.1.41.1.2.2.1.17,SNA-SDLC-MIB::sdlcLSOperLastFailCtrlIn,OCTET,read-only,,current,,This object reflects the last control octet or octets (depending on modulus) received by this SDLC link station at the time of the last failure. If the link station has not failed, then this value has no meaning.
.1.3.6.1.2.1.41.1.2.2.1.18,SNA-SDLC-MIB::sdlcLSOperLastFailCtrlOut,OCTET,read-only,,current,,This object reflects the last control octet or octets (depending on modulus) sent by this SDLC link station at the time of the last failure. If the link station has not failed, then this value has no meaning.
.1.3.6.1.2.1.41.1.2.2.1.19,SNA-SDLC-MIB::sdlcLSOperLastFailFRMRInfo,OCTET,read-only,,current,,This object reflects the information field of the FRMR frame if the last failure for this SDLC link station was as a result of an invalid frame. Otherwise, this field has no meaning.
.1.3.6.1.2.1.41.1.2.2.1.20,SNA-SDLC-MIB::sdlcLSOperLastFailREPLYTOs,Counter32,read-only,,current,,This object reflects the number of times that the REPLYTO timer had expired for an SDLC link station at the time of the last failure. If the link station has not failed, then this value has no meaning.
.1.3.6.1.2.1.41.1.2.2.1.21,SNA-SDLC-MIB::sdlcLSOperEcho,INTEGER,read-only,,current,no(1):yes(2),This object identifies whether the echo bit is in effect for this particular link station.
.1.3.6.1.2.1.41.1.2.2.1.22,SNA-SDLC-MIB::sdlcLSOperGPoll,INTEGER,read-only,,current,,This object describes the group poll address in effect for this link station instance.
.1.3.6.1.2.1.41.1.2.2.1.23,SNA-SDLC-MIB::sdlcLSOperSimRim,INTEGER,read-only,,current,no(1):yes(2),This object reflects the support for transmission and receipt of SIM and RIM control frames for the adjacent link station. The value of this object is set from the XID field received from the adjacent link station.
.1.3.6.1.2.1.41.1.2.2.1.24,SNA-SDLC-MIB::sdlcLSOperXmitRcvCap,INTEGER,read-only,,current,twa(1):tws(2),This object reflects the transmit-receive capabilities for the adjacent SDLC link station. The value of this object is the value of the transmit-receive capability indicator received in the XID image from the adjacent link station.
.1.3.6.1.2.1.41.1.2.3,SNA-SDLC-MIB::sdlcLSStatsTable,,not-accessible,,current,,Each entry in this table contains statistics for a specific SDLC link station.
.1.3.6.1.2.1.41.1.2.3.1,SNA-SDLC-MIB::sdlcLSStatsEntry,,not-accessible,ifIndex:sdlcLSAddress,current,,A list of statistics for an SDLC link station.
.1.3.6.1.2.1.41.1.2.3.1.1,SNA-SDLC-MIB::sdlcLSStatsBLUsIn,Counter32,read-only,,current,,This object reflects the total basic link units (BLUs; frames) received from an adjacent SDLC link station since link station startup. At link station startup time, this object must be initialized to zero.
.1.3.6.1.2.1.41.1.2.3.1.2,SNA-SDLC-MIB::sdlcLSStatsBLUsOut,Counter32,read-only,,current,,This object reflects the total basic link units (BLUs; frames), transmitted to an adjacent SDLC link station since link station startup. At link station startup time, this object must be initialized to zero.
.1.3.6.1.2.1.41.1.2.3.1.3,SNA-SDLC-MIB::sdlcLSStatsOctetsIn,Counter32,read-only,,current,,This object reflects the total octets received from an adjacent SDLC link station since link station startup. This object covers the address, control, and information field of I-Frames only. At link station startup time, this object must be initialized to zero.
.1.3.6.1.2.1.41.1.2.3.1.4,SNA-SDLC-MIB::sdlcLSStatsOctetsOut,Counter32,read-only,,current,,This object reflects the total octets transmitted to an adjacent SDLC link station since link station startup. This object covers the address, control, and information field of I-Frames only. At link station startup time, this object must be initialized to zero.
.1.3.6.1.2.1.41.1.2.3.1.5,SNA-SDLC-MIB::sdlcLSStatsPollsIn,Counter32,read-only,,current,,This object reflects the total polls received from an adjacent SDLC link station since link station startup. At link station startup time, this object must be initialized to zero.
.1.3.6.1.2.1.41.1.2.3.1.6,SNA-SDLC-MIB::sdlcLSStatsPollsOut,Counter32,read-only,,current,,This object reflects the total polls sent to an adjacent SDLC link station since link station startup. At link station startup time, this object must be initialized to zero.
.1.3.6.1.2.1.41.1.2.3.1.7,SNA-SDLC-MIB::sdlcLSStatsPollRspsOut,Counter32,read-only,,current,,This object reflects the total number of poll responses sent to the adjacent SDLC link station since link station startup. This value includes I-frames that are sent in response to a poll. At link station startup time, this object must be initialized to zero.
.1.3.6.1.2.1.41.1.2.3.1.8,SNA-SDLC-MIB::sdlcLSStatsPollRspsIn,Counter32,read-only,,current,,This object reflects the total number of poll responses received from the adjacent SDLC link station since station startup. This value includes I-frames that are received in response to a poll. At link station startup time, this object must be initialized to zero.
.1.3.6.1.2.1.41.1.2.3.1.9,SNA-SDLC-MIB::sdlcLSStatsLocalBusies,Counter32,read-only,,current,,This object reflects the total number of times that the local SDLC link station has entered a busy state (RNR) since link station startup. At link station startup time, this object must be initialized to zero.
.1.3.6.1.2.1.41.1.2.3.1.10,SNA-SDLC-MIB::sdlcLSStatsRemoteBusies,Counter32,read-only,,current,,This object reflects the total number of times that an adjacent ( remote) SDLC link station has entered a busy state (RNR) since link station startup. At link station startup time, this object must be initialized to zero.
.1.3.6.1.2.1.41.1.2.3.1.11,SNA-SDLC-MIB::sdlcLSStatsIFramesIn,Counter32,read-only,,current,,This object reflects the total I-frames received from an adjacent SDLC link station since link station startup. At link station startup time, this object must be initialized to zero.
.1.3.6.1.2.1.41.1.2.3.1.12,SNA-SDLC-MIB::sdlcLSStatsIFramesOut,Counter32,read-only,,current,,This object reflects the total I-frames transmitted to an adjacent SDLC link station since link station startup. At link station startup time, this object must be initialized to zero.
.1.3.6.1.2.1.41.1.2.3.1.13,SNA-SDLC-MIB::sdlcLSStatsUIFramesIn,Counter32,read-only,,current,,This object reflects the total UI-frames received from an adjacent SDLC link station since link station startup.
.1.3.6.1.2.1.41.1.2.3.1.14,SNA-SDLC-MIB::sdlcLSStatsUIFramesOut,Counter32,read-only,,current,,This object reflects the total UI-frames transmitted to an adjacent SDLC link station since link station startup.
.1.3.6.1.2.1.41.1.2.3.1.15,SNA-SDLC-MIB::sdlcLSStatsXIDsIn,Counter32,read-only,,current,,This object reflects the total XID frames received from an adjacent SDLC link station since link station startup.
.1.3.6.1.2.1.41.1.2.3.1.16,SNA-SDLC-MIB::sdlcLSStatsXIDsOut,Counter32,read-only,,current,,This object reflects the total XID frames transmitted to an adjacent SDLC link station since link station startup.
.1.3.6.1.2.1.41.1.2.3.1.17,SNA-SDLC-MIB::sdlcLSStatsTESTsIn,Counter32,read-only,,current,,This object reflects the total TEST frames, commands or responses, received from an adjacent SDLC link station since link station startup.
.1.3.6.1.2.1.41.1.2.3.1.18,SNA-SDLC-MIB::sdlcLSStatsTESTsOut,Counter32,read-only,,current,,This object reflects the total TEST frames, commands or responses, transmitted to an adjacent SDLC link station since link station startup.
.1.3.6.1.2.1.41.1.2.3.1.19,SNA-SDLC-MIB::sdlcLSStatsREJsIn,Counter32,read-only,,current,,This object reflects the total REJ frames received from an adjacent SDLC link station since link station startup.
.1.3.6.1.2.1.41.1.2.3.1.20,SNA-SDLC-MIB::sdlcLSStatsREJsOut,Counter32,read-only,,current,,This object reflects the total REJ frames transmitted to an adjacent SDLC link station since link station startup.
.1.3.6.1.2.1.41.1.2.3.1.21,SNA-SDLC-MIB::sdlcLSStatsFRMRsIn,Counter32,read-only,,current,,This object reflects the total frame reject (FRMR) frames received from an adjacent SDLC link station since link station startup.
.1.3.6.1.2.1.41.1.2.3.1.22,SNA-SDLC-MIB::sdlcLSStatsFRMRsOut,Counter32,read-only,,current,,This object reflects the total frame reject (FRMR) frames transmitted to an adjacent SDLC link station since link station startup.
.1.3.6.1.2.1.41.1.2.3.1.23,SNA-SDLC-MIB::sdlcLSStatsSIMsIn,Counter32,read-only,,current,,This object reflects the total set initialization mode (SIM) frames received from an adjacent SDLC link station since link station startup.
.1.3.6.1.2.1.41.1.2.3.1.24,SNA-SDLC-MIB::sdlcLSStatsSIMsOut,Counter32,read-only,,current,,This object reflects the total set initialization mode (SIM) frames transmitted to an adjacent SDLC link station since link station startup. At link station startup time, this object must be initialized to zero.
.1.3.6.1.2.1.41.1.2.3.1.25,SNA-SDLC-MIB::sdlcLSStatsRIMsIn,Counter32,read-only,,current,,This object reflects the total request initialization mode (RIM) frames received from an adjacent SDLC link station since link station startup. At link station startup time, this object must be initialized to zero.
.1.3.6.1.2.1.41.1.2.3.1.26,SNA-SDLC-MIB::sdlcLSStatsRIMsOut,Counter32,read-only,,current,,This object reflects the total request initialization mode (RIM) frames transmitted to an adjacent SDLC link station since link station startup. At link station startup time, this object must be initialized to zero.
.1.3.6.1.2.1.41.1.2.3.1.27,SNA-SDLC-MIB::sdlcLSStatsDISCIn,Counter32,read-only,,current,,This object reflects the total number of disconnect (DISC) requests received from an adjacent SDLC link station since link station startup. At link station startup time, this object must be initialized to zero.
.1.3.6.1.2.1.41.1.2.3.1.28,SNA-SDLC-MIB::sdlcLSStatsDISCOut,Counter32,read-only,,current,,This object reflects the total number of disconnect (DISC) requests transmited to an adjacent SDLC link station since link station startup. At link station startup time, this object must be initialized to zero.
.1.3.6.1.2.1.41.1.2.3.1.29,SNA-SDLC-MIB::sdlcLSStatsUAIn,Counter32,read-only,,current,,This object reflects the total number of unnumbered acknowledgements (UA) requests received from an adjacent SDLC link station since link station startup. At link station startup time, this object must be initialized to zero.
.1.3.6.1.2.1.41.1.2.3.1.30,SNA-SDLC-MIB::sdlcLSStatsUAOut,Counter32,read-only,,current,,This object reflects the total number of unnumbered acknowledgements (UA) requests transmited to an adjacent SDLC link station since link station startup. At link station startup time, this object must be initialized to zero.
.1.3.6.1.2.1.41.1.2.3.1.31,SNA-SDLC-MIB::sdlcLSStatsDMIn,Counter32,read-only,,current,,This object reflects the total number of disconnect mode (DM) requests received from an adjacent SDLC link station since link station startup. At link station startup time, this object must be initialized to zero.
.1.3.6.1.2.1.41.1.2.3.1.32,SNA-SDLC-MIB::sdlcLSStatsDMOut,Counter32,read-only,,current,,This object reflects the total number of disconnect mode (DM) requests transmited to an adjacent SDLC link station since link station startup. At link station startup time, this object must be initialized to zero.
.1.3.6.1.2.1.41.1.2.3.1.33,SNA-SDLC-MIB::sdlcLSStatsSNRMIn,Counter32,read-only,,current,,This object reflects the total number of set normal response mode (SNRM/SNRME) requests received from an adjacent SDLC link station since link station startup. At link station startup time, this object must be initialized to zero.
.1.3.6.1.2.1.41.1.2.3.1.34,SNA-SDLC-MIB::sdlcLSStatsSNRMOut,Counter32,read-only,,current,,This object reflects the total number of set normal response mode (SNRM/SNRME) requests transmited to an adjacent SDLC link station since link station startup. At link station startup time, this object must be initialized to zero.
.1.3.6.1.2.1.41.1.2.3.1.35,SNA-SDLC-MIB::sdlcLSStatsProtocolErrs,Counter32,read-only,,current,,This object reflects the total occurrences, since link station startup, where this SDLC link station has inactivated the link as a result of receiving a frame from its adjacent link station which was in violation of the protocol. At link station startup time, this object must be initialized to zero.
.1.3.6.1.2.1.41.1.2.3.1.36,SNA-SDLC-MIB::sdlcLSStatsActivityTOs,Counter32,read-only,,current,,This object reflects the total occurrences, since startup, where this SDLC link station has inactivated the link as a result of no activity on the link. At link station startup time, this object must be initialized to zero.
.1.3.6.1.2.1.41.1.2.3.1.37,SNA-SDLC-MIB::sdlcLSStatsRNRLIMITs,Counter32,read-only,,current,,This object reflects the total occurrences, since startup, where this SDLC link station has inactivated the link as a result of its RNRLIMIT timer expiring. At link station startup time, this object must be initialized to zero.
.1.3.6.1.2.1.41.1.2.3.1.38,SNA-SDLC-MIB::sdlcLSStatsRetriesExps,Counter32,read-only,,current,,This object reflects the total occurrences, since startup, where this SDLC link station has inactivated the link as a result of a retry sequence being exhausted. At link station startup time, this object must be initialized to zero.
.1.3.6.1.2.1.41.1.2.3.1.39,SNA-SDLC-MIB::sdlcLSStatsRetransmitsIn,Counter32,read-only,,current,,This object reflects the total number of information frames retransmitted by the remote link station because the N(s) received from that link station indicated that one or more information frames sent by that station were lost. This event causes the first missing information frame of a window and all subsequent information frames to be retransmitted. At link station startup time, this object must be initialized to zero. Management: If the value of sdlcLSStatsRetransmitsIn grows over time, then the quality of the serial line is in question. You might want to look at decreasing the value for sdlcLSAdminMAXDATASend to compensate for the lower quality line.
.1.3.6.1.2.1.41.1.2.3.1.40,SNA-SDLC-MIB::sdlcLSStatsRetransmitsOut,Counter32,read-only,,current,,This object reflects the total number of information frames retransmitted to a remote link station because the N(r) received from that link station indicated that one or more information frames sent to that station were lost. This event causes the first missing information frame of a window and all subsequent information frames to be retransmitted. At link station startup time, this object must be initialized to zero. Management: If the value of sdlcLSStatsRetransmitsOut grows over time, then the quality of the serial line is in question. You might want to look at decreasing the value for sdlcLSAdminMAXDATASend to compensate for the lower quality line.
.1.3.6.1.2.1.41.1.3,SNA-SDLC-MIB::sdlcTraps,,,,,,
.1.3.6.1.2.1.41.1.3.1,SNA-SDLC-MIB::sdlcPortStatusChange,,,,,,This trap indicates that the state of an SDLC port has transitioned to active or inactive.
.1.3.6.1.2.1.41.1.3.2,SNA-SDLC-MIB::sdlcLSStatusChange,,,,,,This trap indicates that the state of an SDLC link station has transitioned to contacted or discontacted.
.1.3.6.1.2.1.41.1.4,SNA-SDLC-MIB::sdlcConformance,,,,,,
.1.3.6.1.2.1.41.1.4.1,SNA-SDLC-MIB::sdlcCompliances,,,,,,
.1.3.6.1.2.1.41.1.4.1.1,SNA-SDLC-MIB::sdlcCoreCompliance,,,,,,The core compliance statement for all SDLC nodes.
.1.3.6.1.2.1.41.1.4.1.2,SNA-SDLC-MIB::sdlcPrimaryCompliance,,,,,,The compliance statement for all nodes that are performing the role of a Primary link station.
.1.3.6.1.2.1.41.1.4.1.3,SNA-SDLC-MIB::sdlcPrimaryMultipointCompliance,,,,,,The compliance statement for all nodes that are performing the role of a primary link station on a multipoint line.
.1.3.6.1.2.1.41.1.4.2,SNA-SDLC-MIB::sdlcGroups,,,,,,
.1.3.6.1.2.1.41.1.4.2.1,SNA-SDLC-MIB::sdlcCoreGroups,,,,,,
.1.3.6.1.2.1.41.1.4.2.1.1,SNA-SDLC-MIB::sdlcCorePortAdminGroup,,,,,,The sdlcCorePortAdminGroup defines objects which are common to the PortAdmin group of all compliant link stations.
.1.3.6.1.2.1.41.1.4.2.1.2,SNA-SDLC-MIB::sdlcCorePortOperGroup,,,,,,The sdlcCorePortOperGroup defines objects which are common to the PortOper group of all compliant link stations.
.1.3.6.1.2.1.41.1.4.2.1.3,SNA-SDLC-MIB::sdlcCorePortStatsGroup,,,,,,The sdlcCorePortStatsGroup defines objects which are common to the PortStats group of all compliant link stations.
.1.3.6.1.2.1.41.1.4.2.1.4,SNA-SDLC-MIB::sdlcCoreLSAdminGroup,,,,,,The sdlcCorePortAdminGroup defines objects which are common to the PortAdmin group of all compliant link stations.
.1.3.6.1.2.1.41.1.4.2.1.5,SNA-SDLC-MIB::sdlcCoreLSOperGroup,,,,,,The sdlcCorePortOperGroup defines objects which are common to the PortOper group of all compliant link stations.
.1.3.6.1.2.1.41.1.4.2.1.6,SNA-SDLC-MIB::sdlcCoreLSStatsGroup,,,,,,The sdlcCorePortStatsGroup defines objects which are common to the PortStats group of all compliant link stations.
.1.3.6.1.2.1.41.1.4.2.2,SNA-SDLC-MIB::sdlcPrimaryGroups,,,,,,
.1.3.6.1.2.1.41.1.4.2.2.1,SNA-SDLC-MIB::sdlcPrimaryGroup,,,,,,The sdlcPrimaryGroup defines objects which are common to all compliant primary link stations.
.1.3.6.1.2.1.41.1.4.2.2.2,SNA-SDLC-MIB::sdlcPrimaryMultipointGroup,,,,,,The sdlcPrimaryMultipointGroup defines objects which are common to all compliant primary link stations that are in a multipoint topology.
.1.3.6.1.2.1.46,DLSW-MIB::dlsw,,,,,,This MIB module contains objects to manage Data Link Switches.
.1.3.6.1.2.1.46.1,DLSW-MIB::dlswMIB,,,,,,
.1.3.6.1.2.1.46.1.0,DLSW-MIB::dlswTraps,,,,,,
.1.3.6.1.2.1.46.1.0.1,DLSW-MIB::dlswTrapTConnPartnerReject,,,,,,This trap is sent each time a transport connection is rejected by a partner DLSw during Capabilities Exchanges. The emission of this trap is controlled by dlswTrapCntlTConnPartnerReject.
.1.3.6.1.2.1.46.1.0.2,DLSW-MIB::dlswTrapTConnProtViolation,,,,,,This trap is sent each time a protocol violation is detected for a transport connection. The emission of this trap is controlled by dlswTrapCntlTConnProtViolation.
.1.3.6.1.2.1.46.1.0.3,DLSW-MIB::dlswTrapTConnUp,,,,,,This trap is sent each time a transport connection enters `connected' state. The emission of this trap is controlled by dlswTrapCntlTConn.
.1.3.6.1.2.1.46.1.0.4,DLSW-MIB::dlswTrapTConnDown,,,,,,This trap is sent each time a transport connection enters `disconnected' state. The emission of this trap is controlled by dlswTrapCntlTConn.
.1.3.6.1.2.1.46.1.0.5,DLSW-MIB::dlswTrapCircuitUp,,,,,,This trap is sent each time a circuit enters `connected' state. The emission of this trap is controlled by dlswTrapCntlCircuit.
.1.3.6.1.2.1.46.1.0.6,DLSW-MIB::dlswTrapCircuitDown,,,,,,This trap is sent each time a circuit enters `disconnected' state. The emission of this trap is controlled by dlswTrapCntlCircuit.
.1.3.6.1.2.1.46.1.1,DLSW-MIB::dlswNode,,,,,,
.1.3.6.1.2.1.46.1.1.1,DLSW-MIB::dlswNodeVersion,OCTET,read-only,,current,,This value identifies the particular version of the DLSw standard supported by this DLSw. The first octet is a hexadecimal value representing the DLSw standard Version number of this DLSw, and the second is a hexadecimal value representing the DLSw standard Release number. This information is reported in DLSw Capabilities Exchange.
.1.3.6.1.2.1.46.1.1.2,DLSW-MIB::dlswNodeVendorID,OCTET,read-only,,current,,The value identifies the manufacturer's IEEE-assigned organizationally Unique Identifier (OUI) of this DLSw. This information is reported in DLSw Capabilities Exchange.
.1.3.6.1.2.1.46.1.1.3,DLSW-MIB::dlswNodeVersionString,OCTET,read-only,,current,,This string gives product-specific information about this DLSw (e.g., product name, code release and fix level). This flows in Capabilities Exchange messages.
.1.3.6.1.2.1.46.1.1.4,DLSW-MIB::dlswNodeStdPacingSupport,INTEGER,read-only,,current,none(1):adaptiveRcvWindow(2):fixedRcvWindow(3),Circuit pacing, as defined in the DLSw Standard, allows each of the two DLSw nodes on a circuit to control the amount of data the other is permitted to send to them. This object reflects the level of support the DLSw node has for this protocol. (1) means the node has no support for the standard circuit pacing flows; it may use RFC 1434+ methods only, or a proprietary flow control scheme. (2) means the node supports the standard scheme and can vary the window sizes it grants as a data receiver. (3) means the node supports the standard scheme but never varies its receive window size.
.1.3.6.1.2.1.46.1.1.5,DLSW-MIB::dlswNodeStatus,INTEGER,read-write,,current,active(1):inactive(2),The status of the DLSw part of the system. Changing the value from active to inactive causes DLSw to take the following actions - (1) it disconnects all circuits through all DLSw partners, (2) it disconnects all transport connections to all DLSw partners, (3) it disconnects all local DLC connections, and (4) it stops processing all DLC connection set-up traffic. Since these are destructive actions, the user should query the circuit and transport connection tables in advance to understand the effect this action will have. Changing the value from inactive to active causes DLSw to come up in its initial state, i.e., transport connections established and ready to bring up circuits.
.1.3.6.1.2.1.46.1.1.6,DLSW-MIB::dlswNodeUpTime,TimeTicks,read-only,,current,,The amount of time (in hundredths of a second) since the DLSw portion of the system was last re-initialized. That is, if dlswState is in the active state, the time the dlswState entered the active state. It will remain zero if dlswState is in the inactive state.
.1.3.6.1.2.1.46.1.1.7,DLSW-MIB::dlswNodeVirtualSegmentLFSize,INTEGER,read-write,,current,lfs516(516):lfs635(635):lfs754(754):lfs873(873):lfs993(993):lfs1112(1112):lfs1231(1231):lfs1350(1350):lfs1470(1470):lfs1542(1542):lfs1615(1615):lfs1688(1688):lfs1761(1761):lfs1833(1833):lfs1906(1906):lfs1979(1979):lfs2052(2052):lfs2345(2345):lfs2638(2638):lfs2932(2932):lfs3225(3225):lfs3518(3518):lfs3812(3812):lfs4105(4105):lfs4399(4399):lfs4865(4865):lfs5331(5331):lfs5798(5798):lfs6264(6264):lfs6730(6730):lfs7197(7197):lfs7663(7663):lfs8130(8130):lfs8539(8539):lfs8949(8949):lfs9358(9358):lfs9768(9768):lfs10178(10178):lfs10587(10587):lfs10997(10997):lfs11407(11407):lfs12199(12199):lfs12992(12992):lfs13785(13785):lfs14578(14578):lfs15370(15370):lfs16163(16163):lfs16956(16956):lfs17749(17749):lfs20730(20730):lfs23711(23711):lfs26693(26693):lfs29674(29674):lfs32655(32655):lfs38618(38618):lfs41600(41600):lfs44591(44591):lfs47583(47583):lfs50575(50575):lfs53567(53567):lfs56559(56559):lfs59551(59551):lfs65535(65535),The largest frame size (including DLC header and info field but not any MAC-level or framing octets) this DLSw can forward on any path through itself. This object can represent any box- level frame size forwarding restriction (e.g., from the use of fixed-size buffers). Some DLSw implementations will have no such restriction. This value will affect the LF size of circuits during circuit creation. The LF size of an existing circuit can be found in the RIF (Routing Information Field).
.1.3.6.1.2.1.46.1.1.8,DLSW-MIB::dlswNodeResourceNBExclusivity,INTEGER,read-write,,current,true(1):false(2),The value of true indicates that the NetBIOS Names configured in dlswDirNBTable are the only ones accessible via this DLSw. If a node supports sending run-time capabilities exchange messages, changes to this object should cause that action. It is up to the implementation exactly when to start the run-time capabilities exchange.
.1.3.6.1.2.1.46.1.1.9,DLSW-MIB::dlswNodeResourceMacExclusivity,INTEGER,read-write,,current,true(1):false(2),The value of true indicates that the MAC addresses configured in the dlswDirMacTable are the only ones accessible via this DLSw. If a node supports sending run-time capabilities exchange messages, changes to this object should cause that action. It is up to the implementation exactly when to start the run-time capabilities exchange.
.1.3.6.1.2.1.46.1.1.10,DLSW-MIB::dlswTrapControl,,,,,,
.1.3.6.1.2.1.46.1.1.10.1,DLSW-MIB::dlswTrapCntlTConnPartnerReject,INTEGER,read-write,,current,enabled(1):disabled(2):partial(3),Indicates whether the DLSw is permitted to emit partner reject related traps. With the value of `enabled' the DLSw will emit all partner reject related traps. With the value of `disabled' the DLSw will not emit any partner reject related traps. With the value of `partial' the DLSw will only emits partner reject traps for CapEx reject. The changes take effect immediately.
.1.3.6.1.2.1.46.1.1.10.2,DLSW-MIB::dlswTrapCntlTConnProtViolation,INTEGER,read-write,,current,true(1):false(2),Indicates whether the DLSw is permitted to generate protocol-violation traps on the events such as window size violation. The changes take effect immediately.
.1.3.6.1.2.1.46.1.1.10.3,DLSW-MIB::dlswTrapCntlTConn,INTEGER,read-write,,current,enabled(1):disabled(2):partial(3),Indicates whether the DLSw is permitted to emit transport connection up and down traps. With the value of `enabled' the DLSw will emit traps when connections enter `connected' and `disconnected' states. With the value of `disabled' the DLSw will not emit traps when connections enter of `connected' and `disconnected' states. With the value of `partial' the DLSw will only emits transport connection down traps when the connection is closed with busy. The changes take effect immediately.
.1.3.6.1.2.1.46.1.1.10.4,DLSW-MIB::dlswTrapCntlCircuit,INTEGER,read-write,,current,enabled(1):disabled(2):partial(3),Indicates whether the DLSw is permitted to generate circuit up and down traps. With the value of `enabled' the DLSw will emit traps when circuits enter `connected' and `disconnected' states. With the value of `disabled' the DLSw will not emit traps when circuits enter of `connected' and `disconnected' states. With the value of `partial' the DLSw will emit traps only for those circuits that are initiated by this DLSw, e.g., originating the CUR_CS message. The changes take effect immediately.
.1.3.6.1.2.1.46.1.2,DLSW-MIB::dlswTConn,,,,,,
.1.3.6.1.2.1.46.1.2.1,DLSW-MIB::dlswTConnStat,,,,,,
.1.3.6.1.2.1.46.1.2.1.1,DLSW-MIB::dlswTConnStatActiveConnections,Gauge32,read-only,,current,,The number of transport connections that are not in `disconnected' state.
.1.3.6.1.2.1.46.1.2.1.2,DLSW-MIB::dlswTConnStatCloseIdles,Counter32,read-only,,current,,The number of times transport connections in this node exited the connected state with zero active circuits on the transport connection.
.1.3.6.1.2.1.46.1.2.1.3,DLSW-MIB::dlswTConnStatCloseBusys,Counter32,read-only,,current,,The number of times transport connections in this node exited the connected state with some non-zero number of active circuits on the transport connection. Normally this means the transport connection failed unexpectedly.
.1.3.6.1.2.1.46.1.2.2,DLSW-MIB::dlswTConnConfigTable,,not-accessible,,current,,This table defines the transport connections that will be initiated or accepted by this DLSw. Structure of masks allows wildcard definition for a collection of transport connections by a conceptual row. For a specific transport connection, there may be multiple of conceptual rows match the transport address. The `best' match will the one to determine the characteristics of the transport connection.
.1.3.6.1.2.1.46.1.2.2.1,DLSW-MIB::dlswTConnConfigEntry,,not-accessible,dlswTConnConfigIndex,current,,Each conceptual row defines a collection of transport connections.
.1.3.6.1.2.1.46.1.2.2.1.1,DLSW-MIB::dlswTConnConfigIndex,INTEGER,not-accessible,,current,,The index to the conceptual row of the table. Negative numbers are not allowed. There are objects defined that point to conceptual rows of this table with this index value. Zero is used to denote that no corresponding row exists. Index values are assigned by the agent, and should not be reused but should continue to increase in value.
.1.3.6.1.2.1.46.1.2.2.1.2,DLSW-MIB::dlswTConnConfigTDomain,OBJECT,read-create,,current,,The object identifier which indicates the transport domain of this conceptual row.
.1.3.6.1.2.1.46.1.2.2.1.3,DLSW-MIB::dlswTConnConfigLocalTAddr,OCTET,read-create,,current,,The local transport address for this conceptual row of the transport connection definition.
.1.3.6.1.2.1.46.1.2.2.1.4,DLSW-MIB::dlswTConnConfigRemoteTAddr,OCTET,read-create,,current,,The remote transport address. Together with dlswTConnConfigEntryType and dlswTConnConfigGroupDefinition, the object instance of this conceptual row identifies a collection of the transport connections that will be either initiated by this DLSw or initiated by a partner DLSw and accepted by this DLSw.
.1.3.6.1.2.1.46.1.2.2.1.5,DLSW-MIB::dlswTConnConfigLastModifyTime,TimeTicks,read-only,,current,,The time (in hundredths of a second) since the value of any object in this conceptual row except for dlswTConnConfigOpens was last changed. This value may be compared to dlswTConnOperConnectTime to determine whether values in this row are completely valid for a transport connection created using this row definition.
.1.3.6.1.2.1.46.1.2.2.1.6,DLSW-MIB::dlswTConnConfigEntryType,INTEGER,read-create,,current,individual(1):global(2):group(3),The object instance signifies the type of entry in the associated conceptual row. The value of `individual' means that the entry applies to a specific partner DLSw node as identified by dlswTConnConfigRemoteTAddr and dlswTConnConfigTDomain. The value of `global' means that the entry applies to all partner DLSw nodes of the TDomain. The value of 'group' means that the entry applies to a specific set of DLSw nodes in the TDomain. Any group definitions are enterprise-specific and are pointed to by dlswTConnConfigGroupDefinition. In the cases of `global' and `group', the value in dlswTConnConfigRemoteTAddr may not have any significance.
.1.3.6.1.2.1.46.1.2.2.1.7,DLSW-MIB::dlswTConnConfigGroupDefinition,OBJECT,read-create,,current,,For conceptual rows of `individual' and `global' as specified in dlswTConnConfigEntryType, the instance of this object is `0.0'. For conceptual rows of `group', the instance points to the specific group definition.
.1.3.6.1.2.1.46.1.2.2.1.8,DLSW-MIB::dlswTConnConfigSetupType,INTEGER,read-create,,current,other(1):activePersistent(2):activeOnDemand(3):passive(4):excluded(5),This value of the instance of a conceptual row identifies the behavior of the collection of transport connections that this conceptual row defines. The value of activePersistent, activeOnDemand and passive means this DLSw will accept any transport connections, initiated by partner DLSw nodes, which are defined by this conceptual row. The value of activePersistent means this DLSw will also initiate the transport connections of this conceptual row and retry periodically if necessary. The value of activeOnDemand means this DLSw will initiate a transport connection of this conceptual row, if there is a directory cache hits. The value of other is implementation specific. The value of exclude means that the specified node is not allowed to be a partner to this DLSw node. To take a certain conceptual row definition out of service, a value of notInService for dlswTConnConfigRowStatus should be used.
.1.3.6.1.2.1.46.1.2.2.1.9,DLSW-MIB::dlswTConnConfigSapList,OCTET,read-create,,current,,The SAP list indicates which SAPs are advertised to the transport connection defined by this conceptual row. Only SAPs with even numbers are represented, in the form of the most significant bit of the first octet representing the SAP 0, the next most significant bit representing the SAP 2, to the least significant bit of the last octet representing the SAP 254. Data link switching is allowed for those SAPs which have one in its corresponding bit, not allowed otherwise. The whole SAP list has to be changed together. Changing the SAP list affects only new circuit establishments and has no effect on established circuits. This list can be used to restrict specific partners from knowing about all the SAPs used by DLSw on all its interfaces (these are represented in dlswIfSapList for each interface). For instance, one may want to run NetBIOS with some partners but not others. If a node supports sending run-time capabilities exchange messages, changes to this object should cause that action. When to start the run-time capabilities exchange is implementation-specific. The DEFVAL below indicates support for SAPs 0, 4, 8, and C.
.1.3.6.1.2.1.46.1.2.2.1.10,DLSW-MIB::dlswTConnConfigAdvertiseMacNB,INTEGER,read-create,,current,true(1):false(2),The value of true indicates that any defined local MAC addresses and NetBIOS names will be advertised to a partner node via initial and (if supported) run-time capabilities exchange messages. The DLSw node should send the appropriate exclusivity control vector to accompany each list it sends, or to represent that the node is explicitly configured to have a null list. The value of false indicates that the DLSw node should not send a MAC address list or NetBIOS name list, and should also not send their corresponding exclusivity control vectors.
.1.3.6.1.2.1.46.1.2.2.1.11,DLSW-MIB::dlswTConnConfigInitCirRecvWndw,INTEGER,read-create,,current,,The initial circuit receive pacing window size, in the unit of SSP messages, to be used for future transport connections activated using this table row. The managed node sends this value as its initial receive pacing window in its initial capabilities exchange message. Changing this value does not affect the initial circuit receive pacing window size of currently active transport connections. If the standard window pacing scheme is not supported, the value is zero. A larger receive window value may be appropriate for partners that are reachable only via physical paths that have longer network delays.
.1.3.6.1.2.1.46.1.2.2.1.12,DLSW-MIB::dlswTConnConfigOpens,Counter32,read-only,,current,,Number of times transport connections entered connected state according to the definition of this conceptual row.
.1.3.6.1.2.1.46.1.2.2.1.13,DLSW-MIB::dlswTConnConfigRowStatus,INTEGER,read-create,,current,active(1):notInService(2):notReady(3):createAndGo(4):createAndWait(5):destroy(6),This object is used by the manager to create or delete the row entry in the dlswTConnConfigTable following the RowStatus textual convention. The value of notInService will be used to take a conceptual row definition out of use.
.1.3.6.1.2.1.46.1.2.3,DLSW-MIB::dlswTConnOperTable,,not-accessible,,current,,A list of transport connections. It is optional but desirable for the agent to keep an entry for some period of time after the transport connection is disconnected. This allows the manager to capture additional useful information about the connection, in particular, statistical information and the cause of the disconnection.
.1.3.6.1.2.1.46.1.2.3.1,DLSW-MIB::dlswTConnOperEntry,,not-accessible,dlswTConnOperTDomain:dlswTConnOperRemoteTAddr,current,,
.1.3.6.1.2.1.46.1.2.3.1.1,DLSW-MIB::dlswTConnOperTDomain,OBJECT,not-accessible,,current,,The object identifier indicates the transport domain of this transport connection.
.1.3.6.1.2.1.46.1.2.3.1.2,DLSW-MIB::dlswTConnOperLocalTAddr,OCTET,read-only,,current,,The local transport address for this transport connection. This value could be different from dlswTConnConfigLocalAddr, if the value of the latter were changed after this transport connection was established.
.1.3.6.1.2.1.46.1.2.3.1.3,DLSW-MIB::dlswTConnOperRemoteTAddr,OCTET,not-accessible,,current,,The remote transport address of this transport connection.
.1.3.6.1.2.1.46.1.2.3.1.4,DLSW-MIB::dlswTConnOperEntryTime,TimeTicks,read-only,,current,,The amount of time (in hundredths of a second) since this transport connection conceptual row was created.
.1.3.6.1.2.1.46.1.2.3.1.5,DLSW-MIB::dlswTConnOperConnectTime,TimeTicks,read-only,,current,,The amount of time (in hundredths of a second) since this transport connection last entered the 'connected' state. A value of zero means this transport connection has never been established.
.1.3.6.1.2.1.46.1.2.3.1.6,DLSW-MIB::dlswTConnOperState,INTEGER,read-write,,current,connecting(1):initCapExchange(2):connected(3):quiescing(4):disconnecting(5):disconnected(6),The state of this transport connection. The transport connection enters `connecting' state when DLSw makes a connection request to the transport layer. Once initial Capabilities Exchange is sent, the transport connection enters enters `initCapExchange' state. When partner capabilities have been determined and the transport connection is ready for sending CanUReach (CUR) messages, it moves to the `connected' state. When DLSw is in the process of bringing down the connection, it is in the `disconnecting' state. When the transport layer indicates one of its connections is disconnected, the transport connection moves to the `disconnected' state. Whereas all of the values will be returned in response to a management protocol retrieval operation, only two values may be specified in a management protocol set operation: `quiescing' and `disconnecting'. Changing the value to `quiescing' prevents new circuits from being established, and will cause a transport disconnect when the last circuit on the connection goes away. Changing the value to `disconnecting' will force off all circuits immediately and bring the connection to `disconnected' state.
.1.3.6.1.2.1.46.1.2.3.1.7,DLSW-MIB::dlswTConnOperConfigIndex,INTEGER,read-only,,current,,The value of dlswTConnConfigIndex of the dlswTConnConfigEntry that governs the configuration information used by this dlswTConnOperEntry. The manager can therefore normally examine both configured and operational information for this transport connection. This value is zero if the corresponding dlswTConnConfigEntry was deleted after the creation of this dlswTConnOperEntry. If some fields in the former were changed but the conceptual row was not deleted, some configuration information may not be valid for this operational transport connection. The manager can compare dlswTConnOperConnectTime and dlswTConnConfigLastModifyTime to determine if this condition exists.
.1.3.6.1.2.1.46.1.2.3.1.8,DLSW-MIB::dlswTConnOperFlowCntlMode,INTEGER,read-only,,current,undetermined(1):pacing(2):other(3),The flow control mechanism in use on this transport connection. This value is undetermined (1) before the mode of flow control can be established on a new transport connection (i.e., after CapEx is sent but before Capex or other SSP control messages have been received). Pacing (2) indicates that the standard RFC 1795 pacing mechanism is in use. Other (3) may be either the RFC 1434+ xBusy mechanism operating to a back-level DLSw, or a vendor-specific flow control method. Whether it is xBusy or not can be inferred from dlswTConnOperPartnerVersion.
.1.3.6.1.2.1.46.1.2.3.1.9,DLSW-MIB::dlswTConnOperPartnerVersion,OCTET,read-only,,current,,This value identifies which version (first octet) and release (second octet) of the DLSw standard is supported by this partner DLSw. This information is obtained from a DLSw capabilities exchange message received from the partner DLSw. A string of zero length is returned before a Capabilities Exchange message is received, or if one is never received. A conceptual row with a dlswTConnOperState of `connected' but a zero length partner version indicates that the partner is a non-standard DLSw partner. If an implementation chooses to keep dlswTConnOperEntrys in the `disconnected' state, this value should remain unchanged.
.1.3.6.1.2.1.46.1.2.3.1.10,DLSW-MIB::dlswTConnOperPartnerVendorID,OCTET,read-only,,current,,This value identifies the IEEE-assigned organizationally Unique Identifier (OUI) of the maker of this partner DLSw. This information is obtained from a DLSw capabilities exchange message received from the partner DLSw. A string of zero length is returned before a Capabilities Exchange message is received, or if one is never received. If an implementation chooses to keep dlswTConnOperEntrys in the `disconnected' state, this value should remain unchanged.
.1.3.6.1.2.1.46.1.2.3.1.11,DLSW-MIB::dlswTConnOperPartnerVersionStr,OCTET,read-only,,current,,This value identifies the particular product version (e.g., product name, code level, fix level) of this partner DLSw. The format of the actual version string is vendor-specific. This information is obtained from a DLSw capabilities exchange message received from the partner DLSw. A string of zero length is returned before a Capabilities Exchange message is received, if one is never received, or if one is received but it does not contain a version string. If an implementation chooses to keep dlswTConnOperEntrys in the `disconnected' state, this value should remain unchanged.
.1.3.6.1.2.1.46.1.2.3.1.12,DLSW-MIB::dlswTConnOperPartnerInitPacingWndw,INTEGER,read-only,,current,,The value of the partner initial receive pacing window. This is our initial send pacing window for all new circuits on this transport connection, as modified and granted by the first flow control indication the partner sends on each circuit. This information is obtained from a DLSw capabilities exchange message received from the partner DLSw. A value of zero is returned before a Capabilities Exchange message is received, or if one is never received. If an implementation chooses to keep dlswTConnOperEntrys in the `disconnected' state, this value should remain unchanged.
.1.3.6.1.2.1.46.1.2.3.1.13,DLSW-MIB::dlswTConnOperPartnerSapList,OCTET,read-only,,current,,The Supported SAP List received in the capabilities exchange message from the partner DLSw. This list has the same format described for dlswTConnConfigSapList. A string of zero length is returned before a Capabilities Exchange message is received, or if one is never received. If an implementation chooses to keep dlswTConnOperEntrys in the `disconnected' state, this value should remain unchanged.
.1.3.6.1.2.1.46.1.2.3.1.14,DLSW-MIB::dlswTConnOperPartnerNBExcl,INTEGER,read-only,,current,true(1):false(2),The value of true signifies that the NetBIOS names received from this partner in the NetBIOS name list in its capabilities exchange message are the only NetBIOS names reachable by that partner. `False' indicates that other NetBIOS names may be reachable. `False' should be returned before a Capabilities Exchange message is received, if one is never received, or if one is received without a NB Name Exclusivity CV. If an implementation chooses to keep dlswTConnOperEntrys in the `disconnected' state, this value should remain unchanged.
.1.3.6.1.2.1.46.1.2.3.1.15,DLSW-MIB::dlswTConnOperPartnerMacExcl,INTEGER,read-only,,current,true(1):false(2),The value of true signifies that the MAC addresses received from this partner in the MAC address list in its capabilities exchange message are the only MAC addresses reachable by that partner. `False' indicates that other MAC addresses may be reachable. `False' should be returned before a Capabilities Exchange message is received, if one is never received, or if one is received without a MAC Address Exclusivity CV. If an implementation chooses to keep dlswTConnOperEntrys in the `disconnected' state, this value should remain unchanged.
.1.3.6.1.2.1.46.1.2.3.1.16,DLSW-MIB::dlswTConnOperPartnerNBInfo,INTEGER,read-only,,current,none(1):partial(2):complete(3):notApplicable(4),It is up to this DSLw whether to keep either none, some, or all of the NetBIOS name list that was received in the capabilities exchange message sent by this partner DLSw. This object identifies how much information was kept by this DLSw. These names are stored as userConfigured remote entries in dlswDirNBTable. A value of (4), notApplicable, should be returned before a Capabilities Exchange message is received, or if one is never received. If an implementation chooses to keep dlswTConnOperEntrys in the `disconnected' state, this value should remain unchanged.
.1.3.6.1.2.1.46.1.2.3.1.17,DLSW-MIB::dlswTConnOperPartnerMacInfo,INTEGER,read-only,,current,none(1):partial(2):complete(3):notApplicable(4),It is up to this DLSw whether to keep either none, some, or all of the MAC address list that was received in the capabilities exchange message sent by this partner DLSw. This object identifies how much information was kept by this DLSw. These names are stored as userConfigured remote entries in dlswDirMACTable. A value of (4), notApplicable, should be returned before a Capabilities Exchange message is received, or if one is never received. If an implementation chooses to keep dlswTConnOperEntrys in the `disconnected' state, this value should remain unchanged.
.1.3.6.1.2.1.46.1.2.3.1.18,DLSW-MIB::dlswTConnOperDiscTime,TimeTicks,read-only,,current,,The amount of time (in hundredths of a second) since the dlswTConnOperState last entered `disconnected' state.
.1.3.6.1.2.1.46.1.2.3.1.19,DLSW-MIB::dlswTConnOperDiscReason,INTEGER,read-only,,current,other(1):capExFailed(2):transportLayerDisc(3):operatorCommand(4):lastCircuitDiscd(5):protocolError(6),This object signifies the reason that either prevented the transport connection from entering the connected state, or caused the transport connection to enter the disconnected state.
.1.3.6.1.2.1.46.1.2.3.1.20,DLSW-MIB::dlswTConnOperDiscActiveCir,INTEGER,read-only,,current,,The number of circuits active (not in DISCONNECTED state) at the time the transport connection was last disconnected. This value is zero if the transport connection has never been connected.
.1.3.6.1.2.1.46.1.2.3.1.21,DLSW-MIB::dlswTConnOperInDataPkts,Counter32,read-only,,current,,The number of Switch-to-Switch Protocol (SSP) messages of type DGRMFRAME, DATAFRAME, or INFOFRAME received on this transport connection.
.1.3.6.1.2.1.46.1.2.3.1.22,DLSW-MIB::dlswTConnOperOutDataPkts,Counter32,read-only,,current,,The number of Switch-to-Switch Protocol (SSP) messages of type DGRMFRAME, DATAFRAME, or INFOFRAME transmitted on this transport connection.
.1.3.6.1.2.1.46.1.2.3.1.23,DLSW-MIB::dlswTConnOperInDataOctets,Counter32,read-only,,current,,The number octets in Switch-to-Switch Protocol (SSP) messages of type DGRMFRAME, DATAFRAME, or INFOFRAME received on this transport connection. Each message is counted starting with the first octet following the SSP message header.
.1.3.6.1.2.1.46.1.2.3.1.24,DLSW-MIB::dlswTConnOperOutDataOctets,Counter32,read-only,,current,,The number octets in Switch-to-Switch Protocol (SSP) messages of type DGRMFRAME, DATAFRAME, or INFOFRAME transmitted on this transport connection. Each message is counted starting with the first octet following the SSP message header.
.1.3.6.1.2.1.46.1.2.3.1.25,DLSW-MIB::dlswTConnOperInCntlPkts,Counter32,read-only,,current,,The number of Switch-to-Switch Protocol (SSP) messages received on this transport connection which were not of type DGRMFRAME, DATAFRAME, or INFOFRAME.
.1.3.6.1.2.1.46.1.2.3.1.26,DLSW-MIB::dlswTConnOperOutCntlPkts,Counter32,read-only,,current,,The number of Switch-to-Switch Protocol (SSP) messages of transmitted on this transport connection which were not of type DGRMFRAME, DATAFRAME, or INFOFRAME.
.1.3.6.1.2.1.46.1.2.3.1.27,DLSW-MIB::dlswTConnOperCURexSents,Counter32,read-only,,current,,The number of CanUReach_ex messages sent on this transport connection.
.1.3.6.1.2.1.46.1.2.3.1.28,DLSW-MIB::dlswTConnOperICRexRcvds,Counter32,read-only,,current,,The number of ICanReach_ex messages received on this transport connection.
.1.3.6.1.2.1.46.1.2.3.1.29,DLSW-MIB::dlswTConnOperCURexRcvds,Counter32,read-only,,current,,The number of CanUReach_ex messages received on this transport connection.
.1.3.6.1.2.1.46.1.2.3.1.30,DLSW-MIB::dlswTConnOperICRexSents,Counter32,read-only,,current,,The number of ICanReach_ex messages sent on this transport connection.
.1.3.6.1.2.1.46.1.2.3.1.31,DLSW-MIB::dlswTConnOperNQexSents,Counter32,read-only,,current,,The number of NetBIOS_NQ_ex (NetBIOS Name Query-explorer) messages sent on this transport connection.
.1.3.6.1.2.1.46.1.2.3.1.32,DLSW-MIB::dlswTConnOperNRexRcvds,Counter32,read-only,,current,,The number of NETBIOS_NR_ex (NetBIOS Name Recognized-explorer) messages received on this transport connection.
.1.3.6.1.2.1.46.1.2.3.1.33,DLSW-MIB::dlswTConnOperNQexRcvds,Counter32,read-only,,current,,The number of NETBIOS_NQ_ex messages received on this transport connection.
.1.3.6.1.2.1.46.1.2.3.1.34,DLSW-MIB::dlswTConnOperNRexSents,Counter32,read-only,,current,,The number of NETBIOS_NR_ex messages sent on this transport connection.
.1.3.6.1.2.1.46.1.2.3.1.35,DLSW-MIB::dlswTConnOperCirCreates,Counter32,read-only,,current,,The number of times that circuits entered `circuit_established' state (not counting transitions from `circuit_restart').
.1.3.6.1.2.1.46.1.2.3.1.36,DLSW-MIB::dlswTConnOperCircuits,Gauge32,read-only,,current,,The number of currently active circuits on this transport connection, where `active' means not in `disconnected' state.
.1.3.6.1.2.1.46.1.2.4,DLSW-MIB::dlswTConnSpecific,,,,,,
.1.3.6.1.2.1.46.1.2.4.1,DLSW-MIB::dlswTConnTcp,,,,,,
.1.3.6.1.2.1.46.1.2.4.1.1,DLSW-MIB::dlswTConnTcpConfigTable,,not-accessible,,current,,This table defines the TCP transport connections that will be either initiated by or accepted by this DSLw. It augments the entries in dlswTConnConfigTable whose domain is dlswTCPDomain.
.1.3.6.1.2.1.46.1.2.4.1.1.1,DLSW-MIB::dlswTConnTcpConfigEntry,,not-accessible,dlswTConnConfigIndex,current,,Each conceptual row defines parameters that are specific to dlswTCPDomain transport connections.
.1.3.6.1.2.1.46.1.2.4.1.1.1.1,DLSW-MIB::dlswTConnTcpConfigKeepAliveInt,INTEGER,read-create,,current,,The time in seconds between TCP keepAlive messages when no traffic is flowing. Zero signifies no keepAlive protocol. Changes take effect only for new TCP connections.
.1.3.6.1.2.1.46.1.2.4.1.1.1.2,DLSW-MIB::dlswTConnTcpConfigTcpConnections,INTEGER,read-create,,current,,This is our preferred number of TCP connections within a TCP transport connection. The actual number used is negotiated at capabilities exchange time. Changes take effect only for new transport connections.
.1.3.6.1.2.1.46.1.2.4.1.1.1.3,DLSW-MIB::dlswTConnTcpConfigMaxSegmentSize,INTEGER,read-create,,current,,This is the number of bytes that this node is willing to receive over the read TCP connection(s). Changes take effect for new transport connections.
.1.3.6.1.2.1.46.1.2.4.1.2,DLSW-MIB::dlswTConnTcpOperTable,,not-accessible,,current,,A list of TCP transport connections. It is optional but desirable for the agent to keep an entry for some period of time after the transport connection is disconnected. This allows the manager to capture additional useful information about the connection, in particular, statistical information and the cause of the disconnection.
.1.3.6.1.2.1.46.1.2.4.1.2.1,DLSW-MIB::dlswTConnTcpOperEntry,,not-accessible,dlswTConnOperTDomain:dlswTConnOperRemoteTAddr,current,,
.1.3.6.1.2.1.46.1.2.4.1.2.1.1,DLSW-MIB::dlswTConnTcpOperKeepAliveInt,INTEGER,read-only,,current,,The time in seconds between TCP keepAlive messages when no traffic is flowing. Zero signifies no keepAlive protocol is operating.
.1.3.6.1.2.1.46.1.2.4.1.2.1.2,DLSW-MIB::dlswTConnTcpOperPrefTcpConnections,INTEGER,read-only,,current,,This is the number of TCP connections preferred by this DLSw partner, as received in its capabilities exchange message.
.1.3.6.1.2.1.46.1.2.4.1.2.1.3,DLSW-MIB::dlswTConnTcpOperTcpConnections,INTEGER,read-only,,current,,This is the actual current number of TCP connections within this transport connection.
.1.3.6.1.2.1.46.1.3,DLSW-MIB::dlswInterface,,,,,,
.1.3.6.1.2.1.46.1.3.1,DLSW-MIB::dlswIfTable,,not-accessible,,current,,The list of interfaces on which DLSw is active.
.1.3.6.1.2.1.46.1.3.1.1,DLSW-MIB::dlswIfEntry,,not-accessible,ifIndex,current,,
.1.3.6.1.2.1.46.1.3.1.1.1,DLSW-MIB::dlswIfRowStatus,INTEGER,read-create,,current,active(1):notInService(2):notReady(3):createAndGo(4):createAndWait(5):destroy(6),This object is used by the manager to create or delete the row entry in the dlswIfTable following the RowStatus textual convention.
.1.3.6.1.2.1.46.1.3.1.1.2,DLSW-MIB::dlswIfVirtualSegment,INTEGER,read-create,,current,,The segment number that uniquely identifies the virtual segment to which this DLSw interface is connected. Current source routing protocols limit this value to the range 0 - 4095. (The value 0 is used by some management applications for special test cases.) A value of 65535 signifies that no virtual segment is assigned to this interface. For instance, in a non-source routing environment, segment number assignment is not required.
.1.3.6.1.2.1.46.1.3.1.1.3,DLSW-MIB::dlswIfSapList,OCTET,read-create,,current,,The SAP list indicates which SAPs are allowed to be data link switched through this interface. This list has the same format described for dlswTConnConfigSapList. When changes to this object take effect is implementation- specific. Turning off a particular SAP can destroy active circuits that are using that SAP. An agent implementation may reject such changes until there are no active circuits if it so chooses. In this case, it is up to the manager to close the circuits first, using dlswCircuitState. The DEFVAL below indicates support for SAPs 0, 4, 8, and C.
.1.3.6.1.2.1.46.1.4,DLSW-MIB::dlswDirectory,,,,,,
.1.3.6.1.2.1.46.1.4.1,DLSW-MIB::dlswDirStat,,,,,,
.1.3.6.1.2.1.46.1.4.1.1,DLSW-MIB::dlswDirMacEntries,Gauge32,read-only,,current,,The current total number of entries in the dlswDirMacTable.
.1.3.6.1.2.1.46.1.4.1.2,DLSW-MIB::dlswDirMacCacheHits,Counter32,read-only,,current,,The number of times a cache search for a particular MAC address resulted in success.
.1.3.6.1.2.1.46.1.4.1.3,DLSW-MIB::dlswDirMacCacheMisses,Counter32,read-only,,current,,The number of times a cache search for a particular MAC address resulted in failure.
.1.3.6.1.2.1.46.1.4.1.4,DLSW-MIB::dlswDirMacCacheNextIndex,INTEGER,read-only,,current,,The next value of dlswDirMacIndex to be assigned by the agent. A retrieval of this object atomically reserves the returned value for use by the manager to create a row in dlswDirMacTable. This makes it possible for the agent to control the index space of the MAC address cache, yet allows the manager to administratively create new rows.
.1.3.6.1.2.1.46.1.4.1.5,DLSW-MIB::dlswDirNBEntries,Gauge32,read-only,,current,,The current total number of entries in the dlswDirNBTable.
.1.3.6.1.2.1.46.1.4.1.6,DLSW-MIB::dlswDirNBCacheHits,Counter32,read-only,,current,,The number of times a cache search for a particular NetBIOS name resulted in success.
.1.3.6.1.2.1.46.1.4.1.7,DLSW-MIB::dlswDirNBCacheMisses,Counter32,read-only,,current,,The number of times a cache search for a particular NetBIOS name resulted in failure.
.1.3.6.1.2.1.46.1.4.1.8,DLSW-MIB::dlswDirNBCacheNextIndex,INTEGER,read-only,,current,,The next value of dlswDirNBIndex to be assigned by the agent. A retrieval of this object atomically reserves the returned value for use by the manager to create a row in dlswDirNBTable. This makes it possible for the agent to control the index space for the NetBIOS name cache, yet allows the manager to administratively create new rows.
.1.3.6.1.2.1.46.1.4.2,DLSW-MIB::dlswDirCache,,,,,,
.1.3.6.1.2.1.46.1.4.2.1,DLSW-MIB::dlswDirMacTable,,not-accessible,,current,,This table contains locations of MAC addresses. They could be either verified or not verified, local or remote, and configured locally or learned from either Capabilities Exchange messages or directory searches.
.1.3.6.1.2.1.46.1.4.2.1.1,DLSW-MIB::dlswDirMacEntry,,not-accessible,dlswDirMacIndex,current,,Indexed by dlswDirMacIndex.
.1.3.6.1.2.1.46.1.4.2.1.1.1,DLSW-MIB::dlswDirMacIndex,INTEGER,not-accessible,,current,,Uniquely identifies a conceptual row of this table.
.1.3.6.1.2.1.46.1.4.2.1.1.2,DLSW-MIB::dlswDirMacMac,OCTET,read-create,,current,,The MAC address, together with the dlswDirMacMask, specifies a set of MAC addresses that are defined or discovered through an interface or partner DLSw nodes.
.1.3.6.1.2.1.46.1.4.2.1.1.3,DLSW-MIB::dlswDirMacMask,OCTET,read-create,,current,,The MAC address mask, together with the dlswDirMacMac, specifies a set of MAC addresses that are defined or discovered through an interface or partner DLSw nodes.
.1.3.6.1.2.1.46.1.4.2.1.1.4,DLSW-MIB::dlswDirMacEntryType,INTEGER,read-create,,current,other(1):userConfiguredPublic(2):userConfiguredPrivate(3):partnerCapExMsg(4):dynamic(5),The cause of the creation of this conceptual row. It could be one of the three methods: (1) user configured, including via management protocol set operations, configuration file, command line or equivalent methods; (2) learned from the partner DLSw Capabilities Exchange messages; and (3) dynamic, e.g., learned from ICanReach messages, or LAN explorer frames. Since only individual MAC addresses can be dynamically learned, dynamic entries will all have a mask of all FFs. The public versus private distinction for user- configured resources applies only to local resources (UC remote resources are private), and indicates whether that resource should be advertised in capabilities exchange messages sent by this node.
.1.3.6.1.2.1.46.1.4.2.1.1.5,DLSW-MIB::dlswDirMacLocationType,INTEGER,read-create,,current,other(1):local(2):remote(3),The location of the resource (or a collection of resources using a mask) of this conceptual row is either (1) local - the resource is reachable via an interface, or (2) remote - the resource is reachable via a partner DLSw node (or a set of partner DLSw nodes).
.1.3.6.1.2.1.46.1.4.2.1.1.6,DLSW-MIB::dlswDirMacLocation,OBJECT,read-create,,current,,Points to either the ifEntry, dlswTConnConfigEntry, dlswTConnOperEntry, 0.0, or something that is implementation specific. It identifies the location of the MAC address (or the collection of MAC addresses.)
.1.3.6.1.2.1.46.1.4.2.1.1.7,DLSW-MIB::dlswDirMacStatus,INTEGER,read-create,,current,unknown(1):reachable(2):notReachable(3),This object specifies whether DLSw currently believes the MAC address to be accessible at the specified location. The value `notReachable' allows a configured resource definition to be taken out of service when a search to that resource fails (avoiding a repeat of the search).
.1.3.6.1.2.1.46.1.4.2.1.1.8,DLSW-MIB::dlswDirMacLFSize,INTEGER,read-create,,current,lfs516(516):lfs635(635):lfs754(754):lfs873(873):lfs993(993):lfs1112(1112):lfs1231(1231):lfs1350(1350):lfs1470(1470):lfs1542(1542):lfs1615(1615):lfs1688(1688):lfs1761(1761):lfs1833(1833):lfs1906(1906):lfs1979(1979):lfs2052(2052):lfs2345(2345):lfs2638(2638):lfs2932(2932):lfs3225(3225):lfs3518(3518):lfs3812(3812):lfs4105(4105):lfs4399(4399):lfs4865(4865):lfs5331(5331):lfs5798(5798):lfs6264(6264):lfs6730(6730):lfs7197(7197):lfs7663(7663):lfs8130(8130):lfs8539(8539):lfs8949(8949):lfs9358(9358):lfs9768(9768):lfs10178(10178):lfs10587(10587):lfs10997(10997):lfs11407(11407):lfs12199(12199):lfs12992(12992):lfs13785(13785):lfs14578(14578):lfs15370(15370):lfs16163(16163):lfs16956(16956):lfs17749(17749):lfs20730(20730):lfs23711(23711):lfs26693(26693):lfs29674(29674):lfs32655(32655):lfs38618(38618):lfs41600(41600):lfs44591(44591):lfs47583(47583):lfs50575(50575):lfs53567(53567):lfs56559(56559):lfs59551(59551):lfs65535(65535),The largest size of the MAC INFO field (LLC header and data) that a circuit to the MAC address can carry through this path.
.1.3.6.1.2.1.46.1.4.2.1.1.9,DLSW-MIB::dlswDirMacRowStatus,INTEGER,read-create,,current,active(1):notInService(2):notReady(3):createAndGo(4):createAndWait(5):destroy(6),This object is used by the manager to create or delete the row entry in the dlswDirMacTable following the RowStatus textual convention.
.1.3.6.1.2.1.46.1.4.2.2,DLSW-MIB::dlswDirNBTable,,not-accessible,,current,,This table contains locations of NetBIOS names. They could be either verified or not verified, local or remote, and configured locally or learned from either Capabilities Exchange messages or directory searches.
.1.3.6.1.2.1.46.1.4.2.2.1,DLSW-MIB::dlswDirNBEntry,,not-accessible,dlswDirNBIndex,current,,Indexed by dlswDirNBIndex.
.1.3.6.1.2.1.46.1.4.2.2.1.1,DLSW-MIB::dlswDirNBIndex,INTEGER,not-accessible,,current,,Uniquely identifies a conceptual row of this table.
.1.3.6.1.2.1.46.1.4.2.2.1.2,DLSW-MIB::dlswDirNBName,OCTET,read-create,,current,,The NetBIOS name (including `any char' and `wildcard' characters) specifies a set of NetBIOS names that are defined or discovered through an interface or partner DLSw nodes.
.1.3.6.1.2.1.46.1.4.2.2.1.3,DLSW-MIB::dlswDirNBNameType,INTEGER,read-create,,current,unknown(1):individual(2):group(3),Whether dlswDirNBName represents an (or a set of) individual or group NetBIOS name(s).
.1.3.6.1.2.1.46.1.4.2.2.1.4,DLSW-MIB::dlswDirNBEntryType,INTEGER,read-create,,current,other(1):userConfiguredPublic(2):userConfiguredPrivate(3):partnerCapExMsg(4):dynamic(5),The cause of the creation of this conceptual row. It could be one of the three methods: (1) user configured, including via management protocol set operations, configuration file, command line, or equivalent methods; (2) learned from the partner DLSw Capabilities Exchange messages; and (3) dynamic, e.g., learned from ICanReach messages, or test frames. Since only actual NetBIOS names can be dynamically learned, dynamic entries will not contain any char or wildcard characters. The public versus private distinction for user- configured resources applies only to local resources (UC remote resources are private), and indicates whether that resource should be advertised in capabilities exchange messages sent by this node.
.1.3.6.1.2.1.46.1.4.2.2.1.5,DLSW-MIB::dlswDirNBLocationType,INTEGER,read-create,,current,other(1):local(2):remote(3),The location of the resource (or a collection of resources using any char/wildcard characters) of this conceptual row is either (1) local - the resource is reachable via an interface, or (2) remote - the resource is reachable via a a partner DLSw node (or a set of partner DLSw nodes).
.1.3.6.1.2.1.46.1.4.2.2.1.6,DLSW-MIB::dlswDirNBLocation,OBJECT,read-create,,current,,Points to either the ifEntry, dlswTConnConfigEntry, dlswTConnOperEntry, 0.0, or something that is implementation specific. It identifies the location of the NetBIOS name or the set of NetBIOS names.
.1.3.6.1.2.1.46.1.4.2.2.1.7,DLSW-MIB::dlswDirNBStatus,INTEGER,read-create,,current,unknown(1):reachable(2):notReachable(3),This object specifies whether DLSw currently believes the NetBIOS name to be accessible at the specified location. The value `notReachable' allows a configured resource definition to be taken out of service when a search to that resource fails (avoiding a repeat of the search).
.1.3.6.1.2.1.46.1.4.2.2.1.8,DLSW-MIB::dlswDirNBLFSize,INTEGER,read-create,,current,lfs516(516):lfs635(635):lfs754(754):lfs873(873):lfs993(993):lfs1112(1112):lfs1231(1231):lfs1350(1350):lfs1470(1470):lfs1542(1542):lfs1615(1615):lfs1688(1688):lfs1761(1761):lfs1833(1833):lfs1906(1906):lfs1979(1979):lfs2052(2052):lfs2345(2345):lfs2638(2638):lfs2932(2932):lfs3225(3225):lfs3518(3518):lfs3812(3812):lfs4105(4105):lfs4399(4399):lfs4865(4865):lfs5331(5331):lfs5798(5798):lfs6264(6264):lfs6730(6730):lfs7197(7197):lfs7663(7663):lfs8130(8130):lfs8539(8539):lfs8949(8949):lfs9358(9358):lfs9768(9768):lfs10178(10178):lfs10587(10587):lfs10997(10997):lfs11407(11407):lfs12199(12199):lfs12992(12992):lfs13785(13785):lfs14578(14578):lfs15370(15370):lfs16163(16163):lfs16956(16956):lfs17749(17749):lfs20730(20730):lfs23711(23711):lfs26693(26693):lfs29674(29674):lfs32655(32655):lfs38618(38618):lfs41600(41600):lfs44591(44591):lfs47583(47583):lfs50575(50575):lfs53567(53567):lfs56559(56559):lfs59551(59551):lfs65535(65535),The largest size of the MAC INFO field (LLC header and data) that a circuit to the NB name can carry through this path.
.1.3.6.1.2.1.46.1.4.2.2.1.9,DLSW-MIB::dlswDirNBRowStatus,INTEGER,read-create,,current,active(1):notInService(2):notReady(3):createAndGo(4):createAndWait(5):destroy(6),This object is used by manager to create or delete the row entry in the dlswDirNBTable following the RowStatus textual convention.
.1.3.6.1.2.1.46.1.4.3,DLSW-MIB::dlswDirLocate,,,,,,
.1.3.6.1.2.1.46.1.4.3.1,DLSW-MIB::dlswDirLocateMacTable,,not-accessible,,current,,This table is used to retrieve all entries in the dlswDirMacTable that match a given MAC address, in the order of the best matched first, the second best matched second, and so on, till no more entries match the given MAC address.
.1.3.6.1.2.1.46.1.4.3.1.1,DLSW-MIB::dlswDirLocateMacEntry,,not-accessible,dlswDirLocateMacMac:dlswDirLocateMacMatch,current,,Indexed by dlswDirLocateMacMac and dlswDirLocateMacMatch. The first object is the MAC address of interest, and the second object is the order in the list of all entries that match the MAC address.
.1.3.6.1.2.1.46.1.4.3.1.1.1,DLSW-MIB::dlswDirLocateMacMac,OCTET,not-accessible,,current,,The MAC address to be located.
.1.3.6.1.2.1.46.1.4.3.1.1.2,DLSW-MIB::dlswDirLocateMacMatch,INTEGER,not-accessible,,current,,The order of the entries of dlswDirMacTable that match dlswDirLocateMacMac. A value of one represents the entry that best matches the MAC address. A value of two represents the second best matched entry, and so on.
.1.3.6.1.2.1.46.1.4.3.1.1.3,DLSW-MIB::dlswDirLocateMacLocation,OBJECT,read-only,,current,,Points to the dlswDirMacEntry.
.1.3.6.1.2.1.46.1.4.3.2,DLSW-MIB::dlswDirLocateNBTable,,not-accessible,,current,,This table is used to retrieve all entries in the dlswDirNBTable that match a given NetBIOS name, in the order of the best matched first, the second best matched second, and so on, till no more entries match the given NetBIOS name.
.1.3.6.1.2.1.46.1.4.3.2.1,DLSW-MIB::dlswDirLocateNBEntry,,not-accessible,dlswDirLocateNBName:dlswDirLocateNBMatch,current,,Indexed by dlswDirLocateNBName and dlswDirLocateNBMatch. The first object is the NetBIOS name of interest, and the second object is the order in the list of all entries that match the NetBIOS name.
.1.3.6.1.2.1.46.1.4.3.2.1.1,DLSW-MIB::dlswDirLocateNBName,OCTET,not-accessible,,current,,The NetBIOS name to be located (no any char or wildcards).
.1.3.6.1.2.1.46.1.4.3.2.1.2,DLSW-MIB::dlswDirLocateNBMatch,INTEGER,not-accessible,,current,,The order of the entries of dlswDirNBTable that match dlswDirLocateNBName. A value of one represents the entry that best matches the NetBIOS name. A value of two represents the second best matched entry, and so on.
.1.3.6.1.2.1.46.1.4.3.2.1.3,DLSW-MIB::dlswDirLocateNBLocation,OBJECT,read-only,,current,,Points to the dlswDirNBEntry.
.1.3.6.1.2.1.46.1.5,DLSW-MIB::dlswCircuit,,,,,,
.1.3.6.1.2.1.46.1.5.1,DLSW-MIB::dlswCircuitStat,,,,,,
.1.3.6.1.2.1.46.1.5.1.1,DLSW-MIB::dlswCircuitStatActives,Gauge32,read-only,,current,,The current number of circuits in dlswCircuitTable that are not in the disconnected state.
.1.3.6.1.2.1.46.1.5.1.2,DLSW-MIB::dlswCircuitStatCreates,Counter32,read-only,,current,,The total number of entries ever added to dlswCircuitTable, or reactivated upon exiting `disconnected' state.
.1.3.6.1.2.1.46.1.5.2,DLSW-MIB::dlswCircuitTable,,not-accessible,,current,,This table is the circuit representation in the DLSw entity. Virtual data links are used to represent any internal end stations. There is a conceptual row associated with each data link. Thus, for circuits without an intervening transport connection, there are two conceptual rows for each circuit. The table consists of the circuits being established, established, and as an implementation option, circuits that have been disconnected. For circuits carried over transport connections, an entry is created after the CUR_cs was sent or received. For circuits between two locally attached devices, or internal virtual MAC addresses, an entry is created when the equivalent of CUR_cs sent/received status is reached. End station 1 (S1) and End station 2 (S2) are used to represent the two end stations of the circuit. S1 is always an end station which is locally attached. S2 may be locally attached or remote. If it is locally attached, the circuit will be represented by two rows indexed by (A, B) and (B, A) where A & B are the relevant MACs/SAPs. The table may be used to store the causes of disconnection of circuits. It is recommended that the oldest disconnected circuit entry be removed from this table when the memory space of disconnected circuits is needed.
.1.3.6.1.2.1.46.1.5.2.1,DLSW-MIB::dlswCircuitEntry,,not-accessible,dlswCircuitS1Mac:dlswCircuitS1Sap:dlswCircuitS2Mac:dlswCircuitS2Sap,current,,
.1.3.6.1.2.1.46.1.5.2.1.1,DLSW-MIB::dlswCircuitS1Mac,OCTET,not-accessible,,current,,The MAC Address of End Station 1 (S1) used for this circuit.
.1.3.6.1.2.1.46.1.5.2.1.2,DLSW-MIB::dlswCircuitS1Sap,OCTET,not-accessible,,current,,The SAP at End Station 1 (S1) used for this circuit.
.1.3.6.1.2.1.46.1.5.2.1.3,DLSW-MIB::dlswCircuitS1IfIndex,INTEGER,read-only,,current,,The ifEntry index of the local interface through which S1 can be reached.
.1.3.6.1.2.1.46.1.5.2.1.4,DLSW-MIB::dlswCircuitS1DlcType,INTEGER,read-only,,current,other(1):na(2):llc(3):sdlc(4):qllc(5),The DLC protocol in use between the DLSw node and S1.
.1.3.6.1.2.1.46.1.5.2.1.5,DLSW-MIB::dlswCircuitS1RouteInfo,OCTET,read-only,,current,,If source-route bridging is in use between the DLSw node and S1, this is the routing information field describing the path between the two devices. Otherwise the value will be an OCTET STRING of zero length.
.1.3.6.1.2.1.46.1.5.2.1.6,DLSW-MIB::dlswCircuitS1CircuitId,OCTET,read-only,,current,,The Circuit ID assigned by this DLSw node to this circuit. The first four octets are the DLC port Id, and the second four octets are the Data Link Correlator. If the DLSw SSP was not used to establish this circuit, the value will be a string of zero length.
.1.3.6.1.2.1.46.1.5.2.1.7,DLSW-MIB::dlswCircuitS1Dlc,OBJECT,read-only,,current,,Points to a conceptual row of the underlying DLC MIB, which could either be the standard MIBs (e.g., the SDLC), or an enterprise-specific DLC MIB.
.1.3.6.1.2.1.46.1.5.2.1.8,DLSW-MIB::dlswCircuitS2Mac,OCTET,not-accessible,,current,,The MAC Address of End Station 2 (S2) used for this circuit.
.1.3.6.1.2.1.46.1.5.2.1.9,DLSW-MIB::dlswCircuitS2Sap,OCTET,not-accessible,,current,,The SAP at End Station 2 (S2) used for this circuit.
.1.3.6.1.2.1.46.1.5.2.1.10,DLSW-MIB::dlswCircuitS2Location,INTEGER,read-only,,current,other(1):internal(2):remote(3):local(4),The location of End Station 2 (S2). If the location of End Station 2 is local, the interface information will be available in the conceptual row whose S1 and S2 are the S2 and the S1 of this conceptual row, respectively.
.1.3.6.1.2.1.46.1.5.2.1.11,DLSW-MIB::dlswCircuitS2TDomain,OBJECT,read-only,,current,,If the location of End Station 2 is remote, this value is the transport domain of the transport protocol the circuit is running over. Otherwise, the value is 0.0.
.1.3.6.1.2.1.46.1.5.2.1.12,DLSW-MIB::dlswCircuitS2TAddress,OCTET,read-only,,current,,If the location of End Station 2 is remote, this object contains the address of the partner DLSw, else it will be an OCTET STRING of zero length.
.1.3.6.1.2.1.46.1.5.2.1.13,DLSW-MIB::dlswCircuitS2CircuitId,OCTET,read-only,,current,,The Circuit ID assigned to this circuit by the partner DLSw node. The first four octets are the DLC port Id, and the second four octets are the Data Link Correlator. If the DLSw SSP was not used to establish this circuit, the value will be a string of zero length.
.1.3.6.1.2.1.46.1.5.2.1.14,DLSW-MIB::dlswCircuitOrigin,INTEGER,read-only,,current,s1(1):s2(2),This object specifies which of the two end stations initiated the establishment of this circuit.
.1.3.6.1.2.1.46.1.5.2.1.15,DLSW-MIB::dlswCircuitEntryTime,TimeTicks,read-only,,current,,The amount of time (in hundredths of a second) since this circuit table conceptual row was created.
.1.3.6.1.2.1.46.1.5.2.1.16,DLSW-MIB::dlswCircuitStateTime,TimeTicks,read-only,,current,,The amount of time (in hundredths of a second) since this circuit entered the current state.
.1.3.6.1.2.1.46.1.5.2.1.17,DLSW-MIB::dlswCircuitState,INTEGER,read-write,,current,disconnected(1):circuitStart(2):resolvePending(3):circuitPending(4):circuitEstablished(5):connectPending(6):contactPending(7):connected(8):disconnectPending(9):haltPending(10):haltPendingNoack(11):circuitRestart(12):restartPending(13),The current state of this circuit. The agent, implementation specific, may choose to keep entries for some period of time after circuit disconnect, so the manager can gather the time and cause of disconnection. While all of the specified values may be returned from a GET operation, the only SETable value is `disconnectPending'. When this value is set, DLSw should perform the appropriate action given its previous state (e.g., send HALT_DL if the state was `connected') to bring the circuit down to the `disconnected' state. Both the partner DLSw and local end station(s) should be notified as appropriate. This MIB provides no facility to re-establish a disconnected circuit, because in DLSw this should be an end station-driven function.
.1.3.6.1.2.1.46.1.5.2.1.18,DLSW-MIB::dlswCircuitPriority,INTEGER,read-only,,current,unsupported(1):low(2):medium(3):high(4):highest(5),The transmission priority of this circuit as understood by this DLSw node. This value is determined by the two DLSw nodes at circuit startup time. If this DLSw node does not support DLSw circuit priority, the value `unsupported' should be returned.
.1.3.6.1.2.1.46.1.5.2.1.19,DLSW-MIB::dlswCircuitFCSendGrantedUnits,INTEGER,read-only,,current,,The number of paced SSP messages that this DLSw is currently authorized to send on this circuit before it must stop and wait for an additional flow control indication from the partner DLSw. The value zero should be returned if this circuit is not running the DLSw pacing protocol.
.1.3.6.1.2.1.46.1.5.2.1.20,DLSW-MIB::dlswCircuitFCSendCurrentWndw,INTEGER,read-only,,current,,The current window size that this DLSw is using in its role as a data sender. This is the value by which this DLSw would increase the number of messages it is authorized to send, if it were to receive a flow control indication with the bits specifying `repeat window'. The value zero should be returned if this circuit is not running the DLSw pacing protocol.
.1.3.6.1.2.1.46.1.5.2.1.21,DLSW-MIB::dlswCircuitFCRecvGrantedUnits,INTEGER,read-only,,current,,The current number of paced SSP messages that this DLSw has authorized the partner DLSw to send on this circuit before the partner DLSw must stop and wait for an additional flow control indication from this DLSw. The value zero should be returned if this circuit is not running the DLSw pacing protocol.
.1.3.6.1.2.1.46.1.5.2.1.22,DLSW-MIB::dlswCircuitFCRecvCurrentWndw,INTEGER,read-only,,current,,The current window size that this DLSw is using in its role as a data receiver. This is the number of additional paced SSP messages that this DLSw would be authorizing its DLSw partner to send, if this DLSw were to send a flow control indication with the bits specifying `repeat window'. The value zero should be returned if this circuit is not running the DLSw pacing protocol.
.1.3.6.1.2.1.46.1.5.2.1.23,DLSW-MIB::dlswCircuitFCLargestRecvGranted,Gauge32,read-only,,current,,The largest receive window size granted by this DLSw during the current activation of this circuit. This is not the largest number of messages granted at any time, but the largest window size as represented by FCIND operator bits. The value zero should be returned if this circuit is not running the DLSw pacing protocol.
.1.3.6.1.2.1.46.1.5.2.1.24,DLSW-MIB::dlswCircuitFCLargestSendGranted,Gauge32,read-only,,current,,The largest send (with respect to this DLSw) window size granted by the partner DLSw during the current activation of this circuit. The value zero should be returned if this circuit is not running the DLSw pacing protocol.
.1.3.6.1.2.1.46.1.5.2.1.25,DLSW-MIB::dlswCircuitFCHalveWndwSents,Counter32,read-only,,current,,The number of Halve Window operations this DLSw has sent on this circuit, in its role as a data receiver. The value zero should be returned if this circuit is not running the DLSw pacing protocol.
.1.3.6.1.2.1.46.1.5.2.1.26,DLSW-MIB::dlswCircuitFCResetOpSents,Counter32,read-only,,current,,The number of Reset Window operations this DLSw has sent on this circuit, in its role as a data receiver. The value zero should be returned if this circuit is not running the DLSw pacing protocol.
.1.3.6.1.2.1.46.1.5.2.1.27,DLSW-MIB::dlswCircuitFCHalveWndwRcvds,Counter32,read-only,,current,,The number of Halve Window operations this DLSw has received on this circuit, in its role as a data sender. The value zero should be returned if this circuit is not running the DLSw pacing protocol.
.1.3.6.1.2.1.46.1.5.2.1.28,DLSW-MIB::dlswCircuitFCResetOpRcvds,Counter32,read-only,,current,,The number of Reset Window operations this DLSw has received on this circuit, in its role as a data sender. The value zero should be returned if this circuit is not running the DLSw pacing protocol.
.1.3.6.1.2.1.46.1.5.2.1.29,DLSW-MIB::dlswCircuitDiscReasonLocal,INTEGER,read-only,,current,endStationDiscRcvd(1):endStationDlcError(2):protocolError(3):operatorCommand(4):haltDlRcvd(5):haltDlNoAckRcvd(6):transportConnClosed(7),The reason why this circuit was last disconnected, as seen by this DLSw node. This object is present only if the agent keeps circuit table entries around for some period after circuit disconnect.
.1.3.6.1.2.1.46.1.5.2.1.30,DLSW-MIB::dlswCircuitDiscReasonRemote,INTEGER,read-only,,current,unknown(1):endStationDiscRcvd(2):endStationDlcError(3):protocolError(4):operatorCommand(5),The generic reason code why this circuit was last disconnected, as reported by the DLSw partner in a HALT_DL or HALT_DL_NOACK. If the partner does not send a reason code in these messages, or the DLSw implementation does not report receiving one, the value `unknown' is returned. This object is present only if the agent keeps circuit table entries around for some period after circuit disconnect.
.1.3.6.1.2.1.46.1.5.2.1.31,DLSW-MIB::dlswCircuitDiscReasonRemoteData,OCTET,read-only,,current,,Implementation-specific data reported by the DLSw partner in a HALT_DL or HALT_DL_NOACK, to help specify how and why this circuit was last disconnected. If the partner does not send this data in these messages, or the DLSw implementation does not report receiving it, a string of zero length is returned. This object is present only if the agent keeps circuit table entries around for some period after circuit disconnect.
.1.3.6.1.2.1.46.1.6,DLSW-MIB::dlswSdlc,,,,,,
.1.3.6.1.2.1.46.1.6.1,DLSW-MIB::dlswSdlcLsEntries,Gauge32,read-only,,current,,The number of entries in dlswSdlcLsTable.
.1.3.6.1.2.1.46.1.6.2,DLSW-MIB::dlswSdlcLsTable,,not-accessible,,current,,The table defines the virtual MAC addresses for those SDLC link stations that participate in data link switching.
.1.3.6.1.2.1.46.1.6.2.1,DLSW-MIB::dlswSdlcLsEntry,,not-accessible,ifIndex:sdlcLSAddress,current,,The index of this table is the ifIndex value for the SDLC port which owns this link station and the poll address of the particular SDLC link station.
.1.3.6.1.2.1.46.1.6.2.1.1,DLSW-MIB::dlswSdlcLsLocalMac,OCTET,read-create,,current,,The virtual MAC address used to represent the SDLC-attached link station to the rest of the DLSw network.
.1.3.6.1.2.1.46.1.6.2.1.2,DLSW-MIB::dlswSdlcLsLocalSap,OCTET,read-create,,current,,The SAP used to represent this link station.
.1.3.6.1.2.1.46.1.6.2.1.3,DLSW-MIB::dlswSdlcLsLocalIdBlock,OCTET,read-create,,current,,The block number is the first three digits of the node_id, if available. These 3 hexadecimal digits identify the product.
.1.3.6.1.2.1.46.1.6.2.1.4,DLSW-MIB::dlswSdlcLsLocalIdNum,OCTET,read-create,,current,,The ID number is the last 5 digits of the node_id, if available. These 5 hexadecimal digits are administratively defined and combined with the 3 digit block number form the node_id. This node_id is used to identify the local node and is included in SNA XIDs.
.1.3.6.1.2.1.46.1.6.2.1.5,DLSW-MIB::dlswSdlcLsRemoteMac,OCTET,read-create,,current,,The MAC address to which DLSw should attempt to connect this link station. If this information is not available, a length of zero for this object should be returned.
.1.3.6.1.2.1.46.1.6.2.1.6,DLSW-MIB::dlswSdlcLsRemoteSap,OCTET,read-create,,current,,The SAP of the remote station to which this link station should be connected. If this information is not available, a length of zero for this object should be returned.
.1.3.6.1.2.1.46.1.6.2.1.7,DLSW-MIB::dlswSdlcLsRowStatus,INTEGER,read-create,,current,active(1):notInService(2):notReady(3):createAndGo(4):createAndWait(5):destroy(6),This object is used by the manager to create or delete the row entry in the dlswSdlcLsTable following the RowStatus textual convention.
.1.3.6.1.2.1.46.2,DLSW-MIB::dlswDomains,,,,,,
.1.3.6.1.2.1.46.2.1,DLSW-MIB::dlswTCPDomain,,,,,,
.1.3.6.1.2.1.46.3,DLSW-MIB::dlswConformance,,,,,,
.1.3.6.1.2.1.46.3.1,DLSW-MIB::dlswCompliances,,,,,,
.1.3.6.1.2.1.46.3.1.1,DLSW-MIB::dlswCoreCompliance,,,,,,The core compliance statement for all DLSw nodes.
.1.3.6.1.2.1.46.3.1.2,DLSW-MIB::dlswTConnTcpCompliance,,,,,,Compliance for DLSw nodes that use TCP as a transport connection protocol.
.1.3.6.1.2.1.46.3.1.3,DLSW-MIB::dlswDirCompliance,,,,,,Compliance for DLSw nodes that provide a directory function.
.1.3.6.1.2.1.46.3.1.4,DLSW-MIB::dlswDirLocateCompliance,,,,,,Compliance for DLSw nodes that provide an ordered list of directory entries for a given resource.
.1.3.6.1.2.1.46.3.1.5,DLSW-MIB::dlswSdlcCompliance,,,,,,Compliance for DLSw nodes that support SDLC.
.1.3.6.1.2.1.46.3.2,DLSW-MIB::dlswGroups,,,,,,
.1.3.6.1.2.1.46.3.2.1,DLSW-MIB::dlswNodeGroup,,,,,,Conformance group for DLSw node general information.
.1.3.6.1.2.1.46.3.2.2,DLSW-MIB::dlswNodeNBGroup,,,,,,Conformance group for DLSw node general information specifically for nodes that support NetBIOS.
.1.3.6.1.2.1.46.3.2.3,DLSW-MIB::dlswTConnStatGroup,,,,,,Conformance group for statistics for transport connections.
.1.3.6.1.2.1.46.3.2.4,DLSW-MIB::dlswTConnConfigGroup,,,,,,Conformance group for the configuration of transport connections.
.1.3.6.1.2.1.46.3.2.5,DLSW-MIB::dlswTConnOperGroup,,,,,,Conformance group for operation information for transport connections.
.1.3.6.1.2.1.46.3.2.6,DLSW-MIB::dlswTConnNBGroup,,,,,,Conformance group for operation information for transport connections, specifically for nodes that support NetBIOS.
.1.3.6.1.2.1.46.3.2.7,DLSW-MIB::dlswTConnTcpConfigGroup,,,,,,Conformance group for configuration information for transport connections using TCP.
.1.3.6.1.2.1.46.3.2.8,DLSW-MIB::dlswTConnTcpOperGroup,,,,,,Conformance group for operation information for transport connections using TCP.
.1.3.6.1.2.1.46.3.2.9,DLSW-MIB::dlswInterfaceGroup,,,,,,Conformance group for DLSw interfaces.
.1.3.6.1.2.1.46.3.2.10,DLSW-MIB::dlswDirGroup,,,,,,Conformance group for DLSw directory using MAC addresses.
.1.3.6.1.2.1.46.3.2.11,DLSW-MIB::dlswDirNBGroup,,,,,,Conformance group for DLSw directory using NetBIOS names.
.1.3.6.1.2.1.46.3.2.12,DLSW-MIB::dlswDirLocateGroup,,,,,,Conformance group for a node that can return directory entry order for a given MAC address.
.1.3.6.1.2.1.46.3.2.13,DLSW-MIB::dlswDirLocateNBGroup,,,,,,Conformance group for a node that can return directory entry order for a given NetBIOS name.
.1.3.6.1.2.1.46.3.2.14,DLSW-MIB::dlswCircuitStatGroup,,,,,,Conformance group for statistics about circuits.
.1.3.6.1.2.1.46.3.2.15,DLSW-MIB::dlswCircuitGroup,,,,,,Conformance group for DLSw circuits.
.1.3.6.1.2.1.46.3.2.16,DLSW-MIB::dlswSdlcGroup,,,,,,Conformance group for DLSw SDLC support.
.1.3.6.1.2.1.46.3.2.17,DLSW-MIB::dlswNotificationGroup,,,,,,Conformance group for DLSw notifications.
.1.3.6.1.2.1.47,ENTITY-MIB::entityMIB,,,,,,The MIB module for representing multiple logical entities supported by a single SNMP agent. Copyright (c) 2013 IETF Trust and the persons identified as authors of the code. All rights reserved. Redistribution and use in source and binary forms, with or without modification, is permitted pursuant to, and subject to the license terms contained in, the Simplified BSD License set forth in Section 4.c of the IETF Trust's Legal Provisions Relating to IETF Documents (http://trustee.ietf.org/license-info).
.1.3.6.1.2.1.47.1,ENTITY-MIB::entityMIBObjects,,,,,,
.1.3.6.1.2.1.47.1.1,ENTITY-MIB::entityPhysical,,,,,,
.1.3.6.1.2.1.47.1.1.1,ENTITY-MIB::entPhysicalTable,,not-accessible,,current,,This table contains one row per physical entity. There is always at least one row for an 'overall' physical entity.
.1.3.6.1.2.1.47.1.1.1.1,ENTITY-MIB::entPhysicalEntry,,not-accessible,entPhysicalIndex,current,,Information about a particular physical entity. Each entry provides objects (entPhysicalDescr, entPhysicalVendorType, and entPhysicalClass) to help an NMS identify and characterize the entry and objects (entPhysicalContainedIn and entPhysicalParentRelPos) to help an NMS relate the particular entry to other entries in this table.
.1.3.6.1.2.1.47.1.1.1.1.1,ENTITY-MIB::entPhysicalIndex,Integer32,not-accessible,,current,,The index for this entry.
.1.3.6.1.2.1.47.1.1.1.1.2,ENTITY-MIB::entPhysicalDescr,OCTET,read-only,,current,,A textual description of physical entity. This object should contain a string that identifies the manufacturer's name for the physical entity and should be set to a distinct value for each version or model of the physical entity.
.1.3.6.1.2.1.47.1.1.1.1.3,ENTITY-MIB::entPhysicalVendorType,OBJECT,read-only,,current,,An indication of the vendor-specific hardware type of the physical entity. Note that this is different from the definition of MIB-II's sysObjectID. An agent should set this object to an enterprise-specific registration identifier value indicating the specific equipment type in detail. The associated instance of entPhysicalClass is used to indicate the general type of hardware device. If no vendor-specific registration identifier exists for this physical entity, or the value is unknown by this agent, then the value { 0 0 } is returned.
.1.3.6.1.2.1.47.1.1.1.1.4,ENTITY-MIB::entPhysicalContainedIn,Integer32,read-only,,current,,The value of entPhysicalIndex for the physical entity that 'contains' this physical entity. A value of zero indicates this physical entity is not contained in any other physical entity. Note that the set of 'containment' relationships define a strict hierarchy; that is, recursion is not allowed. In the event that a physical entity is contained by more than one physical entity (e.g., double-wide modules), this object should identify the containing entity with the lowest value of entPhysicalIndex.
.1.3.6.1.2.1.47.1.1.1.1.5,ENTITY-MIB::entPhysicalClass,INTEGER,read-only,,current,other(1):unknown(2):chassis(3):backplane(4):container(5):powerSupply(6):fan(7):sensor(8):module(9):port(10):stack(11):cpu(12):energyObject(13):battery(14):storageDrive(15),An indication of the general hardware type of the physical entity. An agent should set this object to the standard enumeration value that most accurately indicates the general class of the physical entity, or the primary class if there is more than one entity. If no appropriate standard registration identifier exists for this physical entity, then the value 'other(1)' is returned. If the value is unknown by this agent, then the value 'unknown(2)' is returned.
.1.3.6.1.2.1.47.1.1.1.1.6,ENTITY-MIB::entPhysicalParentRelPos,Integer32,read-only,,current,,An indication of the relative position of this 'child' component among all its 'sibling' components. Sibling components are defined as entPhysicalEntries that share the same instance values of each of the entPhysicalContainedIn and entPhysicalClass objects. An NMS can use this object to identify the relative ordering for all sibling components of a particular parent (identified by the entPhysicalContainedIn instance in each sibling entry). If possible, this value should match any external labeling of the physical component. For example, for a container (e.g., card slot) labeled as 'slot #3', entPhysicalParentRelPos should have the value '3'. Note that the entPhysicalEntry for the module plugged in slot 3 should have an entPhysicalParentRelPos value of '1'. If the physical position of this component does not match any external numbering or clearly visible ordering, then user documentation or other external reference material should be used to determine the parent-relative position. If this is not possible, then the agent should assign a consistent (but possibly arbitrary) ordering to a given set of 'sibling' components, perhaps based on internal representation of the components. If the agent cannot determine the parent-relative position for some reason, or if the associated value of entPhysicalContainedIn is '0', then the value '-1' is returned. Otherwise, a non-negative integer is returned, indicating the parent-relative position of this physical entity. Parent-relative ordering normally starts from '1' and continues to 'N', where 'N' represents the highest positioned child entity. However, if the physical entities (e.g., slots) are labeled from a starting position of zero, then the first sibling should be associated with an entPhysicalParentRelPos value of '0'. Note that this ordering may be sparse or dense, depending on agent implementation. The actual values returned are not globally meaningful, as each 'parent' component may use different numbering algorithms. The ordering is only meaningful among siblings of the same parent component. The agent should retain parent-relative position values across reboots, either through algorithmic assignment or use of non-volatile storage.
.1.3.6.1.2.1.47.1.1.1.1.7,ENTITY-MIB::entPhysicalName,OCTET,read-only,,current,,The textual name of the physical entity. The value of this object should be the name of the component as assigned by the local device and should be suitable for use in commands entered at the device's 'console'. This might be a text name (e.g., 'console') or a simple component number (e.g., port or module number, such as '1'), depending on the physical component naming syntax of the device. If there is no local name, or if this object is otherwise not applicable, then this object contains a zero-length string. Note that the value of entPhysicalName for two physical entities will be the same in the event that the console interface does not distinguish between them, e.g., slot-1 and the card in slot-1.
.1.3.6.1.2.1.47.1.1.1.1.8,ENTITY-MIB::entPhysicalHardwareRev,OCTET,read-only,,current,,The vendor-specific hardware revision string for the physical entity. The preferred value is the hardware revision identifier actually printed on the component itself (if present). Note that if revision information is stored internally in a non-printable (e.g., binary) format, then the agent must convert such information to a printable format in an implementation-specific manner. If no specific hardware revision string is associated with the physical component, or if this information is unknown to the agent, then this object will contain a zero-length string.
.1.3.6.1.2.1.47.1.1.1.1.9,ENTITY-MIB::entPhysicalFirmwareRev,OCTET,read-only,,current,,The vendor-specific firmware revision string for the physical entity. Note that if revision information is stored internally in a non-printable (e.g., binary) format, then the agent must convert such information to a printable format in an implementation-specific manner. If no specific firmware programs are associated with the physical component, or if this information is unknown to the agent, then this object will contain a zero-length string.
.1.3.6.1.2.1.47.1.1.1.1.10,ENTITY-MIB::entPhysicalSoftwareRev,OCTET,read-only,,current,,The vendor-specific software revision string for the physical entity. Note that if revision information is stored internally in a non-printable (e.g., binary) format, then the agent must convert such information to a printable format in an implementation-specific manner. If no specific software programs are associated with the physical component, or if this information is unknown to the agent, then this object will contain a zero-length string.
.1.3.6.1.2.1.47.1.1.1.1.11,ENTITY-MIB::entPhysicalSerialNum,OCTET,read-write,,current,,The vendor-specific serial number string for the physical entity. The preferred value is the serial number string actually printed on the component itself (if present). On the first instantiation of a physical entity, the value of entPhysicalSerialNum associated with that entity is set to the correct vendor-assigned serial number, if this information is available to the agent. If a serial number is unknown or non-existent, the entPhysicalSerialNum will be set to a zero-length string instead. Note that implementations that can correctly identify the serial numbers of all installed physical entities do not need to provide write access to the entPhysicalSerialNum object. Agents that cannot provide non-volatile storage for the entPhysicalSerialNum strings are not required to implement write access for this object. Not every physical component will have a serial number, or even need one. Physical entities for which the associated value of the entPhysicalIsFRU object is equal to 'false(2)' (e.g., the repeater ports within a repeater module) do not need their own unique serial numbers. An agent does not have to provide write access for such entities and may return a zero-length string. If write access is implemented for an instance of entPhysicalSerialNum and a value is written into the instance, the agent must retain the supplied value in the entPhysicalSerialNum instance (associated with the same physical entity) for as long as that entity remains instantiated. This includes instantiations across all re-initializations/reboots of the network management system, including those resulting in a change of the physical entity's entPhysicalIndex value.
.1.3.6.1.2.1.47.1.1.1.1.12,ENTITY-MIB::entPhysicalMfgName,OCTET,read-only,,current,,The name of the manufacturer of this physical component. The preferred value is the manufacturer name string actually printed on the component itself (if present). Note that comparisons between instances of the entPhysicalModelName, entPhysicalFirmwareRev, entPhysicalSoftwareRev, and the entPhysicalSerialNum objects are only meaningful amongst entPhysicalEntries with the same value of entPhysicalMfgName. If the manufacturer name string associated with the physical component is unknown to the agent, then this object will contain a zero-length string.
.1.3.6.1.2.1.47.1.1.1.1.13,ENTITY-MIB::entPhysicalModelName,OCTET,read-only,,current,,The vendor-specific model name identifier string associated with this physical component. The preferred value is the customer-visible part number, which may be printed on the component itself. If the model name string associated with the physical component is unknown to the agent, then this object will contain a zero-length string.
.1.3.6.1.2.1.47.1.1.1.1.14,ENTITY-MIB::entPhysicalAlias,OCTET,read-write,,current,,This object is an 'alias' name for the physical entity, as specified by a network manager, and provides a non-volatile 'handle' for the physical entity. On the first instantiation of a physical entity, the value of entPhysicalAlias associated with that entity is set to the zero-length string. However, the agent may set the value to a locally unique default value, instead of a zero-length string. If write access is implemented for an instance of entPhysicalAlias and a value is written into the instance, the agent must retain the supplied value in the entPhysicalAlias instance (associated with the same physical entity) for as long as that entity remains instantiated. This includes instantiations across all re-initializations/reboots of the network management system, including those resulting in a change of the physical entity's entPhysicalIndex value.
.1.3.6.1.2.1.47.1.1.1.1.15,ENTITY-MIB::entPhysicalAssetID,OCTET,read-write,,current,,This object is a user-assigned asset tracking identifier (as specified by a network manager) for the physical entity and provides non-volatile storage of this information. On the first instantiation of a physical entity, the value of entPhysicalAssetID associated with that entity is set to the zero-length string. Not every physical component will have an asset tracking identifier or even need one. Physical entities for which the associated value of the entPhysicalIsFRU object is equal to 'false(2)' (e.g., the repeater ports within a repeater module) do not need their own unique asset tracking identifier. An agent does not have to provide write access for such entities and may instead return a zero-length string. If write access is implemented for an instance of entPhysicalAssetID and a value is written into the instance, the agent must retain the supplied value in the entPhysicalAssetID instance (associated with the same physical entity) for as long as that entity remains instantiated. This includes instantiations across all re-initializations/reboots of the network management system, including those resulting in a change of the physical entity's entPhysicalIndex value. If no asset tracking information is associated with the physical component, then this object will contain a zero-length string.
.1.3.6.1.2.1.47.1.1.1.1.16,ENTITY-MIB::entPhysicalIsFRU,INTEGER,read-only,,current,true(1):false(2),This object indicates whether or not this physical entity is considered a 'field replaceable unit' by the vendor. If this object contains the value 'true(1)', then this entPhysicalEntry identifies a field replaceable unit. For all entPhysicalEntries that represent components permanently contained within a field replaceable unit, the value 'false(2)' should be returned for this object.
.1.3.6.1.2.1.47.1.1.1.1.17,ENTITY-MIB::entPhysicalMfgDate,OCTET,read-only,,current,,This object contains the date of manufacturing of the managed entity. If the manufacturing date is unknown or not supported, the object is not instantiated. The special value '0000000000000000'H may also be returned in this case.
.1.3.6.1.2.1.47.1.1.1.1.18,ENTITY-MIB::entPhysicalUris,OCTET,read-write,,current,,This object contains identification information about the physical entity. The object contains URIs; therefore, the syntax of this object must conform to RFC 3986, Section 3. Multiple URIs may be present and are separated by white space characters. Leading and trailing white space characters are ignored. If no URI identification information is known about the physical entity, the object is not instantiated. A zero-length octet string may also be returned in this case.
.1.3.6.1.2.1.47.1.1.1.1.19,ENTITY-MIB::entPhysicalUUID,OCTET,read-only,,current,,This object contains identification information about the physical entity. The object contains a Universally Unique Identifier, the syntax of this object must conform to RFC 4122, Section 4.1. A zero-length octet string is returned if no UUID information is known.
.1.3.6.1.2.1.47.1.2,ENTITY-MIB::entityLogical,,,,,,
.1.3.6.1.2.1.47.1.2.1,ENTITY-MIB::entLogicalTable,,not-accessible,,current,,This table contains one row per logical entity. For agents that implement more than one naming scope, at least one entry must exist. Agents that instantiate all MIB objects within a single naming scope are not required to implement this table.
.1.3.6.1.2.1.47.1.2.1.1,ENTITY-MIB::entLogicalEntry,,not-accessible,entLogicalIndex,current,,Information about a particular logical entity. Entities may be managed by this agent or other SNMP agents (possibly) in the same chassis.
.1.3.6.1.2.1.47.1.2.1.1.1,ENTITY-MIB::entLogicalIndex,Integer32,not-accessible,,current,,The value of this object uniquely identifies the logical entity. The value should be a small positive integer; index values for different logical entities are not necessarily contiguous.
.1.3.6.1.2.1.47.1.2.1.1.2,ENTITY-MIB::entLogicalDescr,OCTET,read-only,,current,,A textual description of the logical entity. This object should contain a string that identifies the manufacturer's name for the logical entity and should be set to a distinct value for each version of the logical entity.
.1.3.6.1.2.1.47.1.2.1.1.3,ENTITY-MIB::entLogicalType,OBJECT,read-only,,current,,An indication of the type of logical entity. This will typically be the OBJECT IDENTIFIER name of the node in the SMI's naming hierarchy that represents the major MIB module, or the majority of the MIB modules, supported by the logical entity. For example: a logical entity of a regular host/router -> mib-2 a logical entity of a 802.1d bridge -> dot1dBridge a logical entity of a 802.3 repeater -> snmpDot3RptrMgmt If an appropriate node in the SMI's naming hierarchy cannot be identified, the value 'mib-2' should be used.
.1.3.6.1.2.1.47.1.2.1.1.4,ENTITY-MIB::entLogicalCommunity,OCTET,read-only,,deprecated,,An SNMPv1 or SNMPv2c community string, which can be used to access detailed management information for this logical entity. The agent should allow read access with this community string (to an appropriate subset of all managed objects) and may also return a community string based on the privileges of the request used to read this object. Note that an agent may return a community string with read-only privileges, even if this object is accessed with a read-write community string. However, the agent must take care not to return a community string that allows more privileges than the community string used to access this object. A compliant SNMP agent may wish to conserve naming scopes by representing multiple logical entities in a single 'default' naming scope. This is possible when the logical entities, represented by the same value of entLogicalCommunity, have no object instances in common. For example, 'bridge1' and 'repeater1' may be part of the main naming scope, but at least one additional community string is needed to represent 'bridge2' and 'repeater2'. Logical entities 'bridge1' and 'repeater1' would be represented by sysOREntries associated with the 'default' naming scope. For agents not accessible via SNMPv1 or SNMPv2c, the value of this object is the empty string. This object may also contain an empty string if a community string has not yet been assigned by the agent or if no community string with suitable access rights can be returned for a particular SNMP request. Note that this object is deprecated. Agents that implement SNMPv3 access should use the entLogicalContextEngineID and entLogicalContextName objects to identify the context associated with each logical entity. SNMPv3 agents may return a zero-length string for this object or may continue to return a community string (e.g., tri-lingual agent support).
.1.3.6.1.2.1.47.1.2.1.1.5,ENTITY-MIB::entLogicalTAddress,OCTET,read-only,,current,,The transport service address by which the logical entity receives network management traffic, formatted according to the corresponding value of entLogicalTDomain. For snmpUDPDomain, a TAddress is 6 octets long: the initial 4 octets contain the IP-address in network-byte order, and the last 2 contain the UDP port in network-byte order. Consult RFC 3417 for further information on snmpUDPDomain.
.1.3.6.1.2.1.47.1.2.1.1.6,ENTITY-MIB::entLogicalTDomain,OBJECT,read-only,,current,,Indicates the kind of transport service by which the logical entity receives network management traffic. Possible values for this object are presently found in RFC 3417.
.1.3.6.1.2.1.47.1.2.1.1.7,ENTITY-MIB::entLogicalContextEngineID,OCTET,read-only,,current,,The authoritative contextEngineID that can be used to send an SNMP message concerning information held by this logical entity to the address specified by the associated 'entLogicalTAddress/entLogicalTDomain' pair. This object, together with the associated entLogicalContextName object, defines the context associated with a particular logical entity and allows access to SNMP engines identified by a contextEngineID and contextName pair. If no value has been configured by the agent, a zero-length string is returned, or the agent may choose not to instantiate this object at all.
.1.3.6.1.2.1.47.1.2.1.1.8,ENTITY-MIB::entLogicalContextName,OCTET,read-only,,current,,The contextName that can be used to send an SNMP message concerning information held by this logical entity to the address specified by the associated 'entLogicalTAddress/entLogicalTDomain' pair. This object, together with the associated entLogicalContextEngineID object, defines the context associated with a particular logical entity and allows access to SNMP engines identified by a contextEngineID and contextName pair. If no value has been configured by the agent, a zero-length string is returned, or the agent may choose not to instantiate this object at all.
.1.3.6.1.2.1.47.1.3,ENTITY-MIB::entityMapping,,,,,,
.1.3.6.1.2.1.47.1.3.1,ENTITY-MIB::entLPMappingTable,,not-accessible,,current,,This table contains zero or more rows of logical entity to physical equipment associations. For each logical entity known by this agent, there are zero or more mappings to the physical resources, which are used to realize that logical entity. An agent should limit the number and nature of entries in this table such that only meaningful and non-redundant information is returned. For example, in a system that contains a single power supply, mappings between logical entities and the power supply are not useful and should not be included. Also, only the most appropriate physical component, which is closest to the root of a particular containment tree, should be identified in an entLPMapping entry. For example, suppose a bridge is realized on a particular module, and all ports on that module are ports on this bridge. A mapping between the bridge and the module would be useful, but additional mappings between the bridge and each of the ports on that module would be redundant (because the entPhysicalContainedIn hierarchy can provide the same information). On the other hand, if more than one bridge were utilizing ports on this module, then mappings between each bridge and the ports it used would be appropriate. Also, in the case of a single backplane repeater, a mapping for the backplane to the single repeater entity is not necessary.
.1.3.6.1.2.1.47.1.3.1.1,ENTITY-MIB::entLPMappingEntry,,not-accessible,entLogicalIndex:entLPPhysicalIndex,current,,Information about a particular logical-entity-to-physical- equipment association. Note that the nature of the association is not specifically identified in this entry. It is expected that sufficient information exists in the MIB modules used to manage a particular logical entity to infer how physical component information is utilized.
.1.3.6.1.2.1.47.1.3.1.1.1,ENTITY-MIB::entLPPhysicalIndex,Integer32,read-only,,current,,The value of this object identifies the index value of a particular entPhysicalEntry associated with the indicated entLogicalEntity.
.1.3.6.1.2.1.47.1.3.2,ENTITY-MIB::entAliasMappingTable,,not-accessible,,current,,This table contains zero or more rows, representing mappings of logical entities and physical components to external MIB identifiers. Each physical port in the system may be associated with a mapping to an external identifier, which itself is associated with a particular logical entity's naming scope. A 'wildcard' mechanism is provided to indicate that an identifier is associated with more than one logical entity.
.1.3.6.1.2.1.47.1.3.2.1,ENTITY-MIB::entAliasMappingEntry,,not-accessible,entPhysicalIndex:entAliasLogicalIndexOrZero,current,,Information about a particular binding between a logical entity/physical component pair and an external identifier. Each logical entity/physical component pair may be associated with one alias mapping. The logical entity index may also be used as a 'wildcard' (refer to the entAliasLogicalIndexOrZero objectclause for details.) Note that only entPhysicalIndex values that represent physical ports (i.e., associated entPhysicalClass value is 'port(10)') are permitted to exist in this table.
.1.3.6.1.2.1.47.1.3.2.1.1,ENTITY-MIB::entAliasLogicalIndexOrZero,Integer32,not-accessible,,current,,The value of this object identifies the logical entity that defines the naming scope for the associated instance of the entAliasMappingIdentifier object. If this object has a non-zero value, then it identifies the logical entity named by the same value of entLogicalIndex. If this object has a value of zero, then the mapping between the physical component and the alias identifier for this entAliasMapping entry is associated with all unspecified logical entities. That is, a value of zero (the default mapping) identifies any logical entity that does not have an explicit entry in this table for a particular entPhysicalIndex/entAliasMappingIdentifier pair. For example, to indicate that a particular interface (e.g., physical component 33) is identified by the same value of ifIndex for all logical entities, the following instance might exist: entAliasMappingIdentifier.33.0 = ifIndex.5 In the event an entPhysicalEntry is associated differently for some logical entities, additional entAliasMapping entries may exist, e.g.: entAliasMappingIdentifier.33.0 = ifIndex.6 entAliasMappingIdentifier.33.4 = ifIndex.1 entAliasMappingIdentifier.33.5 = ifIndex.1 entAliasMappingIdentifier.33.10 = ifIndex.12 Note that entries with non-zero entAliasLogicalIndexOrZero index values have precedence over zero-indexed entries. In this example, all logical entities except 4, 5, and 10 associate physical entity 33 with ifIndex.6.
.1.3.6.1.2.1.47.1.3.2.1.2,ENTITY-MIB::entAliasMappingIdentifier,OBJECT,read-only,,current,,The value of this object identifies a particular conceptual row associated with the indicated entPhysicalIndex and entLogicalIndex pair. Because only physical ports are modeled in this table, only entries that represent interfaces or ports are allowed. If an ifEntry exists on behalf of a particular physical port, then this object should identify the associated ifEntry. For repeater ports, the appropriate row in the 'rptrPortGroupTable' should be identified instead. For example, suppose a physical port was represented by entPhysicalEntry.3, entLogicalEntry.15 existed for a repeater, and entLogicalEntry.22 existed for a bridge. Then there might be two related instances of entAliasMappingIdentifier: entAliasMappingIdentifier.3.15 == rptrPortGroupIndex.5.2 entAliasMappingIdentifier.3.22 == ifIndex.17 It is possible that other mappings (besides interfaces and repeater ports) may be defined in the future, as required. Bridge ports are identified by examining the Bridge MIB and appropriate ifEntries associated with each 'dot1dBasePort' and are thus not represented in this table.
.1.3.6.1.2.1.47.1.3.3,ENTITY-MIB::entPhysicalContainsTable,,not-accessible,,current,,A table that exposes the container/'containee' relationships between physical entities. This table provides all the information found by constructing the virtual containment tree for a given entPhysicalTable, but in a more direct format. In the event a physical entity is contained by more than one other physical entity (e.g., double-wide modules), this table should include these additional mappings, which cannot be represented in the entPhysicalTable virtual containment tree.
.1.3.6.1.2.1.47.1.3.3.1,ENTITY-MIB::entPhysicalContainsEntry,,not-accessible,entPhysicalIndex:entPhysicalChildIndex,current,,A single container/'containee' relationship.
.1.3.6.1.2.1.47.1.3.3.1.1,ENTITY-MIB::entPhysicalChildIndex,Integer32,read-only,,current,,The value of entPhysicalIndex for the contained physical entity.
.1.3.6.1.2.1.47.1.4,ENTITY-MIB::entityGeneral,,,,,,
.1.3.6.1.2.1.47.1.4.1,ENTITY-MIB::entLastChangeTime,TimeTicks,read-only,,current,,The value of sysUpTime at the time a conceptual row is created, modified, or deleted in any of these tables: - entPhysicalTable - entLogicalTable - entLPMappingTable - entAliasMappingTable - entPhysicalContainsTable 
.1.3.6.1.2.1.47.2,ENTITY-MIB::entityMIBTraps,,,,,,
.1.3.6.1.2.1.47.2.0,ENTITY-MIB::entityMIBTrapPrefix,,,,,,
.1.3.6.1.2.1.47.2.0.1,ENTITY-MIB::entConfigChange,,,,,,An entConfigChange notification is generated when the value of entLastChangeTime changes. It can be utilized by an NMS to trigger logical/physical entity table maintenance polls. An agent should not generate more than one entConfigChange 'notification-event' in a given time interval (five seconds is the suggested default). A 'notification-event' is the transmission of a single trap or inform PDU to a list of notification destinations. If additional configuration changes occur within the throttling period, then notification-events for these changes should be suppressed by the agent until the current throttling period expires. At the end of a throttling period, one notification-event should be generated if any configuration changes occurred since the start of the throttling period. In such a case, another throttling period is started right away. An NMS should periodically check the value of entLastChangeTime to detect any missed entConfigChange notification-events, e.g., due to throttling or transmission loss.
.1.3.6.1.2.1.47.3,ENTITY-MIB::entityConformance,,,,,,
.1.3.6.1.2.1.47.3.1,ENTITY-MIB::entityCompliances,,,,,,
.1.3.6.1.2.1.47.3.1.1,ENTITY-MIB::entityCompliance,,,,,,The compliance statement for SNMP entities that implement version 1 of the Entity MIB.
.1.3.6.1.2.1.47.3.1.2,ENTITY-MIB::entity2Compliance,,,,,,The compliance statement for SNMP entities that implement version 2 of the Entity MIB.
.1.3.6.1.2.1.47.3.1.3,ENTITY-MIB::entity3Compliance,,,,,,The compliance statement for SNMP entities that implement version 3 of the Entity MIB.
.1.3.6.1.2.1.47.3.1.4,ENTITY-MIB::entity4Compliance,,,,,,The compliance statement for SNMP entities that implement the full version 4 (full compliance) of the Entity MIB.
.1.3.6.1.2.1.47.3.1.5,ENTITY-MIB::entity4CRCompliance,,,,,,The compliance statement for SNMP entities that implement version 4 of the Entity MIB on devices with constrained resources.
.1.3.6.1.2.1.47.3.2,ENTITY-MIB::entityGroups,,,,,,
.1.3.6.1.2.1.47.3.2.1,ENTITY-MIB::entityPhysicalGroup,,,,,,The collection of objects used to represent physical system components for which a single agent provides management information.
.1.3.6.1.2.1.47.3.2.2,ENTITY-MIB::entityLogicalGroup,,,,,,The collection of objects used to represent the list of logical entities for which a single agent provides management information.
.1.3.6.1.2.1.47.3.2.3,ENTITY-MIB::entityMappingGroup,,,,,,The collection of objects used to represent the associations between multiple logical entities, physical components, interfaces, and port identifiers for which a single agent provides management information.
.1.3.6.1.2.1.47.3.2.4,ENTITY-MIB::entityGeneralGroup,,,,,,The collection of objects used to represent general entity information for which a single agent provides management information.
.1.3.6.1.2.1.47.3.2.5,ENTITY-MIB::entityNotificationsGroup,,,,,,The collection of notifications used to indicate Entity MIB data consistency and general status information.
.1.3.6.1.2.1.47.3.2.6,ENTITY-MIB::entityPhysical2Group,,,,,,The collection of objects used to represent physical system components for which a single agent provides management information. This group augments the objects contained in the entityPhysicalGroup.
.1.3.6.1.2.1.47.3.2.7,ENTITY-MIB::entityLogical2Group,,,,,,The collection of objects used to represent the list of logical entities for which a single SNMP entity provides management information.
.1.3.6.1.2.1.47.3.2.8,ENTITY-MIB::entityPhysical3Group,,,,,,The collection of objects used to represent physical system components for which a single agent provides management information. This group augments the objects contained in the entityPhysicalGroup.
.1.3.6.1.2.1.47.3.2.9,ENTITY-MIB::entityPhysical4Group,,,,,,The collection of objects used to represent physical system components for which a single agent provides management information. This group augments the objects contained in the entityPhysicalGroup and entityPhysicalCRGroup.
.1.3.6.1.2.1.47.3.2.10,ENTITY-MIB::entityPhysicalCRGroup,,,,,,The collection of objects used to represent physical system components for constrained resourced devices, for which a single agent provides management information.
.1.3.6.1.2.1.48,IP-MIB::ipMIB,,,,,,The MIB module for managing IP and ICMP implementations, but excluding their management of IP routes. Copyright (C) The Internet Society (2006). This version of this MIB module is part of RFC 4293; see the RFC itself for full legal notices.
.1.3.6.1.2.1.48.2,IP-MIB::ipMIBConformance,,,,,,
.1.3.6.1.2.1.48.2.1,IP-MIB::ipMIBCompliances,,,,,,
.1.3.6.1.2.1.48.2.1.1,IP-MIB::ipMIBCompliance,,,,,,The compliance statement for systems that implement only IPv4. For version-independence, this compliance statement is deprecated in favor of ipMIBCompliance2.
.1.3.6.1.2.1.48.2.1.2,IP-MIB::ipMIBCompliance2,,,,,,The compliance statement for systems that implement IP - either IPv4 or IPv6. There are a number of INDEX objects that cannot be represented in the form of OBJECT clauses in SMIv2, but for which we have the following compliance requirements, expressed in OBJECT clause form in this description clause: -- OBJECT ipSystemStatsIPVersion -- SYNTAX InetVersion {ipv4(1), ipv6(2)} -- DESCRIPTION -- This MIB requires support for only IPv4 and IPv6 -- versions. -- -- OBJECT ipIfStatsIPVersion -- SYNTAX InetVersion {ipv4(1), ipv6(2)} -- DESCRIPTION -- This MIB requires support for only IPv4 and IPv6 -- versions. -- -- OBJECT icmpStatsIPVersion -- SYNTAX InetVersion {ipv4(1), ipv6(2)} -- DESCRIPTION -- This MIB requires support for only IPv4 and IPv6 -- versions. -- -- OBJECT icmpMsgStatsIPVersion -- SYNTAX InetVersion {ipv4(1), ipv6(2)} -- DESCRIPTION -- This MIB requires support for only IPv4 and IPv6 -- versions. -- -- OBJECT ipAddressPrefixType -- SYNTAX InetAddressType {ipv4(1), ipv6(2)} -- DESCRIPTION -- This MIB requires support for only global IPv4 and -- IPv6 address types. -- -- OBJECT ipAddressPrefixPrefix -- SYNTAX InetAddress (Size(4 | 16)) -- DESCRIPTION -- This MIB requires support for only global IPv4 and -- IPv6 addresses and so the size can be either 4 or -- 16 bytes. -- -- OBJECT ipAddressAddrType -- SYNTAX InetAddressType {ipv4(1), ipv6(2), -- ipv4z(3), ipv6z(4)} -- DESCRIPTION -- This MIB requires support for only global and -- non-global IPv4 and IPv6 address types. -- -- OBJECT ipAddressAddr -- SYNTAX InetAddress (Size(4 | 8 | 16 | 20)) -- DESCRIPTION -- This MIB requires support for only global and -- non-global IPv4 and IPv6 addresses and so the size -- can be 4, 8, 16, or 20 bytes. -- -- OBJECT ipNetToPhysicalNetAddressType -- SYNTAX InetAddressType {ipv4(1), ipv6(2), -- ipv4z(3), ipv6z(4)} -- DESCRIPTION -- This MIB requires support for only global and -- non-global IPv4 and IPv6 address types. -- -- OBJECT ipNetToPhysicalNetAddress -- SYNTAX InetAddress (Size(4 | 8 | 16 | 20)) -- DESCRIPTION -- This MIB requires support for only global and -- non-global IPv4 and IPv6 addresses and so the size -- can be 4, 8, 16, or 20 bytes. -- -- OBJECT ipDefaultRouterAddressType -- SYNTAX InetAddressType {ipv4(1), ipv6(2), -- ipv4z(3), ipv6z(4)} -- DESCRIPTION -- This MIB requires support for only global and -- non-global IPv4 and IPv6 address types. -- -- OBJECT ipDefaultRouterAddress -- SYNTAX InetAddress (Size(4 | 8 | 16 | 20)) -- DESCRIPTION -- This MIB requires support for only global and -- non-global IPv4 and IPv6 addresses and so the size -- can be 4, 8, 16, or 20 bytes.
.1.3.6.1.2.1.48.2.2,IP-MIB::ipMIBGroups,,,,,,
.1.3.6.1.2.1.48.2.2.1,IP-MIB::ipGroup,,,,,,The ip group of objects providing for basic management of IP entities, exclusive of the management of IP routes. As part of the version independence, this group has been deprecated. 
.1.3.6.1.2.1.48.2.2.2,IP-MIB::icmpGroup,,,,,,The icmp group of objects providing ICMP statistics. As part of the version independence, this group has been deprecated. 
.1.3.6.1.2.1.48.2.2.3,IP-MIB::ipv4GeneralGroup,,,,,,The group of IPv4-specific objects for basic management of IPv4 entities.
.1.3.6.1.2.1.48.2.2.4,IP-MIB::ipv4IfGroup,,,,,,The group of IPv4-specific objects for basic management of IPv4 interfaces.
.1.3.6.1.2.1.48.2.2.5,IP-MIB::ipv6GeneralGroup2,,,,,,The IPv6 group of objects providing for basic management of IPv6 entities.
.1.3.6.1.2.1.48.2.2.6,IP-MIB::ipv6IfGroup,,,,,,The group of IPv6-specific objects for basic management of IPv6 interfaces.
.1.3.6.1.2.1.48.2.2.7,IP-MIB::ipLastChangeGroup,,,,,,The last change objects associated with this MIB. These objects are optional for all agents. They SHOULD be implemented on agents where it is possible to determine the proper values. Where it is not possible to determine the proper values, for example when the tables are split amongst several sub-agents using AgentX, the agent MUST NOT implement these objects to return an incorrect or static value.
.1.3.6.1.2.1.48.2.2.8,IP-MIB::ipSystemStatsGroup,,,,,,IP system wide statistics.
.1.3.6.1.2.1.48.2.2.9,IP-MIB::ipv4SystemStatsGroup,,,,,,IPv4 only system wide statistics.
.1.3.6.1.2.1.48.2.2.10,IP-MIB::ipSystemStatsHCOctetGroup,,,,,,IP system wide statistics for systems that may overflow the standard octet counters within 1 hour.
.1.3.6.1.2.1.48.2.2.11,IP-MIB::ipSystemStatsHCPacketGroup,,,,,,IP system wide statistics for systems that may overflow the standard packet counters within 1 hour.
.1.3.6.1.2.1.48.2.2.12,IP-MIB::ipv4SystemStatsHCPacketGroup,,,,,,IPv4 only system wide statistics for systems that may overflow the standard packet counters within 1 hour.
.1.3.6.1.2.1.48.2.2.13,IP-MIB::ipIfStatsGroup,,,,,,IP per-interface statistics.
.1.3.6.1.2.1.48.2.2.14,IP-MIB::ipv4IfStatsGroup,,,,,,IPv4 only per-interface statistics.
.1.3.6.1.2.1.48.2.2.15,IP-MIB::ipIfStatsHCOctetGroup,,,,,,IP per-interfaces statistics for systems that include interfaces that may overflow the standard octet counters within 1 hour.
.1.3.6.1.2.1.48.2.2.16,IP-MIB::ipIfStatsHCPacketGroup,,,,,,IP per-interfaces statistics for systems that include interfaces that may overflow the standard packet counters within 1 hour.
.1.3.6.1.2.1.48.2.2.17,IP-MIB::ipv4IfStatsHCPacketGroup,,,,,,IPv4 only per-interface statistics for systems that include interfaces that may overflow the standard packet counters within 1 hour.
.1.3.6.1.2.1.48.2.2.18,IP-MIB::ipAddressPrefixGroup,,,,,,The group of objects for providing information about address prefixes used by this node.
.1.3.6.1.2.1.48.2.2.19,IP-MIB::ipAddressGroup,,,,,,The group of objects for providing information about the addresses relevant to this entity's interfaces.
.1.3.6.1.2.1.48.2.2.20,IP-MIB::ipNetToPhysicalGroup,,,,,,The group of objects for providing information about the mappings of network address to physical address known to this node.
.1.3.6.1.2.1.48.2.2.21,IP-MIB::ipv6ScopeGroup,,,,,,The group of objects for managing IPv6 scope zones.
.1.3.6.1.2.1.48.2.2.22,IP-MIB::ipDefaultRouterGroup,,,,,,The group of objects for providing information about default routers known to this node.
.1.3.6.1.2.1.48.2.2.23,IP-MIB::ipv6RouterAdvertGroup,,,,,,The group of objects for controlling information advertised by IPv6 routers.
.1.3.6.1.2.1.48.2.2.24,IP-MIB::icmpStatsGroup,,,,,,The group of objects providing ICMP statistics.
.1.3.6.1.2.1.52,INTEGRATED-SERVICES-MIB::intSrv,,,,,,The MIB module to describe the Integrated Services Protocol
.1.3.6.1.2.1.52.1,INTEGRATED-SERVICES-MIB::intSrvObjects,,,,,,
.1.3.6.1.2.1.52.1.1,INTEGRATED-SERVICES-MIB::intSrvIfAttribTable,,not-accessible,,current,,The reservable attributes of the system's in- terfaces.
.1.3.6.1.2.1.52.1.1.1,INTEGRATED-SERVICES-MIB::intSrvIfAttribEntry,,not-accessible,ifIndex,current,,The reservable attributes of a given inter- face.
.1.3.6.1.2.1.52.1.1.1.1,INTEGRATED-SERVICES-MIB::intSrvIfAttribAllocatedBits,INTEGER,read-only,,current,,The number of bits/second currently allocated to reserved sessions on the interface.
.1.3.6.1.2.1.52.1.1.1.2,INTEGRATED-SERVICES-MIB::intSrvIfAttribMaxAllocatedBits,INTEGER,read-create,,current,,The maximum number of bits/second that may be allocated to reserved sessions on the inter- face.
.1.3.6.1.2.1.52.1.1.1.3,INTEGRATED-SERVICES-MIB::intSrvIfAttribAllocatedBuffer,INTEGER,read-only,,current,,The amount of buffer space required to hold the simultaneous burst of all reserved flows on the interface.
.1.3.6.1.2.1.52.1.1.1.4,INTEGRATED-SERVICES-MIB::intSrvIfAttribFlows,Gauge32,read-only,,current,,The number of reserved flows currently active on this interface. A flow can be created ei- ther from a reservation protocol (such as RSVP or ST-II) or via configuration information.
.1.3.6.1.2.1.52.1.1.1.5,INTEGRATED-SERVICES-MIB::intSrvIfAttribPropagationDelay,Integer32,read-create,,current,,The amount of propagation delay that this in- terface introduces in addition to that intro- diced by bit propagation delays.
.1.3.6.1.2.1.52.1.1.1.6,INTEGRATED-SERVICES-MIB::intSrvIfAttribStatus,INTEGER,read-create,,current,active(1):notInService(2):notReady(3):createAndGo(4):createAndWait(5):destroy(6),'active' on interfaces that are configured for RSVP.
.1.3.6.1.2.1.52.1.2,INTEGRATED-SERVICES-MIB::intSrvFlowTable,,not-accessible,,current,,Information describing the reserved flows us- ing the system's interfaces.
.1.3.6.1.2.1.52.1.2.1,INTEGRATED-SERVICES-MIB::intSrvFlowEntry,,not-accessible,intSrvFlowNumber,current,,Information describing the use of a given in- terface by a given flow. The counter intSrvFlowPoliced starts counting at the in- stallation of the flow.
.1.3.6.1.2.1.52.1.2.1.1,INTEGRATED-SERVICES-MIB::intSrvFlowNumber,INTEGER,not-accessible,,current,,The number of this flow. This is for SNMP In- dexing purposes only and has no relation to any protocol value.
.1.3.6.1.2.1.52.1.2.1.2,INTEGRATED-SERVICES-MIB::intSrvFlowType,INTEGER,read-create,,current,,The type of session (IP4, IP6, IP6 with flow information, etc).
.1.3.6.1.2.1.52.1.2.1.3,INTEGRATED-SERVICES-MIB::intSrvFlowOwner,INTEGER,read-create,,current,other(1):rsvp(2):management(3),The process that installed this flow in the queue policy database.
.1.3.6.1.2.1.52.1.2.1.4,INTEGRATED-SERVICES-MIB::intSrvFlowDestAddr,OCTET,read-create,,current,,The destination address used by all senders in this session. This object may not be changed when the value of the RowStatus object is 'ac- tive'.
.1.3.6.1.2.1.52.1.2.1.5,INTEGRATED-SERVICES-MIB::intSrvFlowSenderAddr,OCTET,read-create,,current,,The source address of the sender selected by this reservation. The value of all zeroes in- dicates 'all senders'. This object may not be changed when the value of the RowStatus object is 'active'.
.1.3.6.1.2.1.52.1.2.1.6,INTEGRATED-SERVICES-MIB::intSrvFlowDestAddrLength,INTEGER,read-create,,current,,The length of the destination address in bits. This is the CIDR Prefix Length, which for IP4 hosts and multicast addresses is 32 bits. This object may not be changed when the value of the RowStatus object is 'active'.
.1.3.6.1.2.1.52.1.2.1.7,INTEGRATED-SERVICES-MIB::intSrvFlowSenderAddrLength,INTEGER,read-create,,current,,The length of the sender's address in bits. This is the CIDR Prefix Length, which for IP4 hosts and multicast addresses is 32 bits. This object may not be changed when the value of the RowStatus object is 'active'.
.1.3.6.1.2.1.52.1.2.1.8,INTEGRATED-SERVICES-MIB::intSrvFlowProtocol,INTEGER,read-create,,current,,The IP Protocol used by a session. This ob- ject may not be changed when the value of the RowStatus object is 'active'.
.1.3.6.1.2.1.52.1.2.1.9,INTEGRATED-SERVICES-MIB::intSrvFlowDestPort,OCTET,read-create,,current,,The UDP or TCP port number used as a destina- tion port for all senders in this session. If the IP protocol in use, specified by intSrvResvFwdProtocol, is 50 (ESP) or 51 (AH), this represents a virtual destination port number. A value of zero indicates that the IP protocol in use does not have ports. This ob- ject may not be changed when the value of the RowStatus object is 'active'.
.1.3.6.1.2.1.52.1.2.1.10,INTEGRATED-SERVICES-MIB::intSrvFlowPort,OCTET,read-create,,current,,The UDP or TCP port number used as a source port for this sender in this session. If the IP protocol in use, specified by intSrvResvFwdProtocol is 50 (ESP) or 51 (AH), this represents a generalized port identifier (GPI). A value of zero indicates that the IP protocol in use does not have ports. This ob- ject may not be changed when the value of the RowStatus object is 'active'.
.1.3.6.1.2.1.52.1.2.1.11,INTEGRATED-SERVICES-MIB::intSrvFlowFlowId,INTEGER,read-only,,current,,The flow ID that this sender is using, if this is an IPv6 session.
.1.3.6.1.2.1.52.1.2.1.12,INTEGRATED-SERVICES-MIB::intSrvFlowInterface,Integer32,read-create,,current,,The ifIndex value of the interface on which this reservation exists.
.1.3.6.1.2.1.52.1.2.1.13,INTEGRATED-SERVICES-MIB::intSrvFlowIfAddr,OCTET,read-create,,current,,The IP Address on the ifEntry on which this reservation exists. This is present primarily to support those interfaces which layer multi- ple IP Addresses on the interface.
.1.3.6.1.2.1.52.1.2.1.14,INTEGRATED-SERVICES-MIB::intSrvFlowRate,INTEGER,read-create,,current,,The Reserved Rate of the sender's data stream. If this is a Controlled Load service flow, this rate is derived from the Tspec rate parameter (r). If this is a Guaranteed service flow, this rate is derived from the Rspec clearing rate parameter (R).
.1.3.6.1.2.1.52.1.2.1.15,INTEGRATED-SERVICES-MIB::intSrvFlowBurst,INTEGER,read-create,,current,,The size of the largest burst expected from the sender at a time. If this is less than the sender's advertised burst size, the receiver is asking the network to provide flow pacing beyond what would be provided under normal circumstances. Such pac- ing is at the network's option.
.1.3.6.1.2.1.52.1.2.1.16,INTEGRATED-SERVICES-MIB::intSrvFlowWeight,Integer32,read-create,,current,,The weight used to prioritize the traffic. Note that the interpretation of this object is implementation-specific, as implementations vary in their use of weighting procedures.
.1.3.6.1.2.1.52.1.2.1.17,INTEGRATED-SERVICES-MIB::intSrvFlowQueue,Integer32,read-create,,current,,The number of the queue used by this traffic. Note that the interpretation of this object is implementation-specific, as implementations vary in their use of queue identifiers.
.1.3.6.1.2.1.52.1.2.1.18,INTEGRATED-SERVICES-MIB::intSrvFlowMinTU,INTEGER,read-create,,current,,The minimum message size for this flow. The policing algorithm will treat smaller messages as though they are this size.
.1.3.6.1.2.1.52.1.2.1.19,INTEGRATED-SERVICES-MIB::intSrvFlowMaxTU,INTEGER,read-create,,current,,The maximum datagram size for this flow that will conform to the traffic specification. This value cannot exceed the MTU of the interface.
.1.3.6.1.2.1.52.1.2.1.20,INTEGRATED-SERVICES-MIB::intSrvFlowBestEffort,Counter32,read-only,,current,,The number of packets that were remanded to best effort service.
.1.3.6.1.2.1.52.1.2.1.21,INTEGRATED-SERVICES-MIB::intSrvFlowPoliced,Counter32,read-only,,current,,The number of packets policed since the incep- tion of the flow's service.
.1.3.6.1.2.1.52.1.2.1.22,INTEGRATED-SERVICES-MIB::intSrvFlowDiscard,INTEGER,read-create,,current,true(1):false(2),If 'true', the flow is to incur loss when traffic is policed. If 'false', policed traff- ic is treated as best effort traffic.
.1.3.6.1.2.1.52.1.2.1.23,INTEGRATED-SERVICES-MIB::intSrvFlowService,INTEGER,read-only,,current,bestEffort(1):guaranteedDelay(2):controlledLoad(5),The QoS service being applied to this flow.
.1.3.6.1.2.1.52.1.2.1.24,INTEGRATED-SERVICES-MIB::intSrvFlowOrder,INTEGER,read-create,,current,,In the event of ambiguity, the order in which the classifier should make its comparisons. The row with intSrvFlowOrder=0 is tried first, and comparisons proceed in the order of in- creasing value. Non-serial implementations of the classifier should emulate this behavior.
.1.3.6.1.2.1.52.1.2.1.25,INTEGRATED-SERVICES-MIB::intSrvFlowStatus,INTEGER,read-create,,current,active(1):notInService(2):notReady(3):createAndGo(4):createAndWait(5):destroy(6),'active' for all active flows. This object may be used to install static classifier infor- mation, delete classifier information, or au- thorize such.
.1.3.6.1.2.1.52.2,INTEGRATED-SERVICES-MIB::intSrvGenObjects,,,,,,
.1.3.6.1.2.1.52.2.1,INTEGRATED-SERVICES-MIB::intSrvFlowNewIndex,,read-write,,current,,This object is used to assign values to intSrvFlowNumber as described in 'Textual Con- ventions for SNMPv2'. The network manager reads the object, and then writes the value back in the SET that creates a new instance of intSrvFlowEntry. If the SET fails with the code 'inconsistentValue', then the process must be repeated; If the SET succeeds, then the ob- ject is incremented, and the new instance is created according to the manager's directions.
.1.3.6.1.2.1.52.3,INTEGRATED-SERVICES-MIB::intSrvNotifications,,,,,,
.1.3.6.1.2.1.52.4,INTEGRATED-SERVICES-MIB::intSrvConformance,,,,,,
.1.3.6.1.2.1.52.4.1,INTEGRATED-SERVICES-MIB::intSrvGroups,,,,,,
.1.3.6.1.2.1.52.4.1.1,INTEGRATED-SERVICES-MIB::intSrvIfAttribGroup,,,,,,These objects are required for Systems sup- porting the Integrated Services Architecture.
.1.3.6.1.2.1.52.4.1.2,INTEGRATED-SERVICES-MIB::intSrvFlowsGroup,,,,,,These objects are required for Systems sup- porting the Integrated Services Architecture.
.1.3.6.1.2.1.52.4.2,INTEGRATED-SERVICES-MIB::intSrvCompliances,,,,,,
.1.3.6.1.2.1.52.4.2.1,INTEGRATED-SERVICES-MIB::intSrvCompliance,,,,,,The compliance statement 
.1.3.6.1.2.1.67,RADIUS-AUTH-CLIENT-MIB::radiusMIB,,,,,,The OID assigned to RADIUS MIB work by the IANA.
.1.3.6.1.2.1.67.1,RADIUS-AUTH-CLIENT-MIB::radiusAuthentication,,,,,,
.1.3.6.1.2.1.67.1.2,RADIUS-AUTH-CLIENT-MIB::radiusAuthClientMIB,,,,,,The MIB module for entities implementing the client side of the Remote Authentication Dial-In User Service (RADIUS) authentication protocol. Copyright (C) The Internet Society (2006). This version of this MIB module is part of RFC 4668; see the RFC itself for full legal notices.
.1.3.6.1.2.1.67.1.2.1,RADIUS-AUTH-CLIENT-MIB::radiusAuthClientMIBObjects,,,,,,
.1.3.6.1.2.1.67.1.2.1.1,RADIUS-AUTH-CLIENT-MIB::radiusAuthClient,,,,,,
.1.3.6.1.2.1.67.1.2.1.1.1,RADIUS-AUTH-CLIENT-MIB::radiusAuthClientInvalidServerAddresses,Counter32,read-only,,current,,The number of RADIUS Access-Response packets received from unknown addresses.
.1.3.6.1.2.1.67.1.2.1.1.2,RADIUS-AUTH-CLIENT-MIB::radiusAuthClientIdentifier,OCTET,read-only,,current,,The NAS-Identifier of the RADIUS authentication client. This is not necessarily the same as sysName in MIB II.
.1.3.6.1.2.1.67.1.2.1.1.3,RADIUS-AUTH-CLIENT-MIB::radiusAuthServerTable,,not-accessible,,deprecated,,The (conceptual) table listing the RADIUS authentication servers with which the client shares a secret.
.1.3.6.1.2.1.67.1.2.1.1.3.1,RADIUS-AUTH-CLIENT-MIB::radiusAuthServerEntry,,not-accessible,radiusAuthServerIndex,deprecated,,An entry (conceptual row) representing a RADIUS authentication server with which the client shares a secret.
.1.3.6.1.2.1.67.1.2.1.1.3.1.1,RADIUS-AUTH-CLIENT-MIB::radiusAuthServerIndex,Integer32,not-accessible,,deprecated,,A number uniquely identifying each RADIUS Authentication server with which this client communicates.
.1.3.6.1.2.1.67.1.2.1.1.3.1.2,RADIUS-AUTH-CLIENT-MIB::radiusAuthServerAddress,IpAddress,read-only,,deprecated,,The IP address of the RADIUS authentication server referred to in this table entry.
.1.3.6.1.2.1.67.1.2.1.1.3.1.3,RADIUS-AUTH-CLIENT-MIB::radiusAuthClientServerPortNumber,Integer32,read-only,,deprecated,,The UDP port the client is using to send requests to this server.
.1.3.6.1.2.1.67.1.2.1.1.3.1.4,RADIUS-AUTH-CLIENT-MIB::radiusAuthClientRoundTripTime,TimeTicks,read-only,,deprecated,,The time interval (in hundredths of a second) between the most recent Access-Reply/Access-Challenge and the Access-Request that matched it from this RADIUS authentication server.
.1.3.6.1.2.1.67.1.2.1.1.3.1.5,RADIUS-AUTH-CLIENT-MIB::radiusAuthClientAccessRequests,Counter32,read-only,,deprecated,,The number of RADIUS Access-Request packets sent to this server. This does not include retransmissions.
.1.3.6.1.2.1.67.1.2.1.1.3.1.6,RADIUS-AUTH-CLIENT-MIB::radiusAuthClientAccessRetransmissions,Counter32,read-only,,deprecated,,The number of RADIUS Access-Request packets retransmitted to this RADIUS authentication server.
.1.3.6.1.2.1.67.1.2.1.1.3.1.7,RADIUS-AUTH-CLIENT-MIB::radiusAuthClientAccessAccepts,Counter32,read-only,,deprecated,,The number of RADIUS Access-Accept packets (valid or invalid) received from this server.
.1.3.6.1.2.1.67.1.2.1.1.3.1.8,RADIUS-AUTH-CLIENT-MIB::radiusAuthClientAccessRejects,Counter32,read-only,,deprecated,,The number of RADIUS Access-Reject packets (valid or invalid) received from this server.
.1.3.6.1.2.1.67.1.2.1.1.3.1.9,RADIUS-AUTH-CLIENT-MIB::radiusAuthClientAccessChallenges,Counter32,read-only,,deprecated,,The number of RADIUS Access-Challenge packets (valid or invalid) received from this server.
.1.3.6.1.2.1.67.1.2.1.1.3.1.10,RADIUS-AUTH-CLIENT-MIB::radiusAuthClientMalformedAccessResponses,Counter32,read-only,,deprecated,,The number of malformed RADIUS Access-Response packets received from this server. Malformed packets include packets with an invalid length. Bad authenticators or Message Authenticator attributes or unknown types are not included as malformed access responses.
.1.3.6.1.2.1.67.1.2.1.1.3.1.11,RADIUS-AUTH-CLIENT-MIB::radiusAuthClientBadAuthenticators,Counter32,read-only,,deprecated,,The number of RADIUS Access-Response packets containing invalid authenticators or Message Authenticator attributes received from this server.
.1.3.6.1.2.1.67.1.2.1.1.3.1.12,RADIUS-AUTH-CLIENT-MIB::radiusAuthClientPendingRequests,Gauge32,read-only,,deprecated,,The number of RADIUS Access-Request packets destined for this server that have not yet timed out or received a response. This variable is incremented when an Access-Request is sent and decremented due to receipt of an Access-Accept, Access-Reject, Access-Challenge, timeout, or retransmission.
.1.3.6.1.2.1.67.1.2.1.1.3.1.13,RADIUS-AUTH-CLIENT-MIB::radiusAuthClientTimeouts,Counter32,read-only,,deprecated,,The number of authentication timeouts to this server. After a timeout, the client may retry to the same server, send to a different server, or give up. A retry to the same server is counted as a retransmit as well as a timeout. A send to a different server is counted as a Request as well as a timeout.
.1.3.6.1.2.1.67.1.2.1.1.3.1.14,RADIUS-AUTH-CLIENT-MIB::radiusAuthClientUnknownTypes,Counter32,read-only,,deprecated,,The number of RADIUS packets of unknown type that were received from this server on the authentication port.
.1.3.6.1.2.1.67.1.2.1.1.3.1.15,RADIUS-AUTH-CLIENT-MIB::radiusAuthClientPacketsDropped,Counter32,read-only,,deprecated,,The number of RADIUS packets that were received from this server on the authentication port and dropped for some other reason.
.1.3.6.1.2.1.67.1.2.1.1.4,RADIUS-AUTH-CLIENT-MIB::radiusAuthServerExtTable,,not-accessible,,current,,The (conceptual) table listing the RADIUS authentication servers with which the client shares a secret.
.1.3.6.1.2.1.67.1.2.1.1.4.1,RADIUS-AUTH-CLIENT-MIB::radiusAuthServerExtEntry,,not-accessible,radiusAuthServerExtIndex,current,,An entry (conceptual row) representing a RADIUS authentication server with which the client shares a secret.
.1.3.6.1.2.1.67.1.2.1.1.4.1.1,RADIUS-AUTH-CLIENT-MIB::radiusAuthServerExtIndex,Integer32,not-accessible,,current,,A number uniquely identifying each RADIUS Authentication server with which this client communicates.
.1.3.6.1.2.1.67.1.2.1.1.4.1.2,RADIUS-AUTH-CLIENT-MIB::radiusAuthServerInetAddressType,INTEGER,read-only,,current,unknown(0):ipv4(1):ipv6(2):ipv4z(3):ipv6z(4):dns(16),The type of address format used for the radiusAuthServerInetAddress object.
.1.3.6.1.2.1.67.1.2.1.1.4.1.3,RADIUS-AUTH-CLIENT-MIB::radiusAuthServerInetAddress,OCTET,read-only,,current,,The IP address of the RADIUS authentication server referred to in this table entry, using the version-neutral IP address format.
.1.3.6.1.2.1.67.1.2.1.1.4.1.4,RADIUS-AUTH-CLIENT-MIB::radiusAuthClientServerInetPortNumber,Unsigned32,read-only,,current,,The UDP port the client is using to send requests to this server. The value of zero (0) is invalid.
.1.3.6.1.2.1.67.1.2.1.1.4.1.5,RADIUS-AUTH-CLIENT-MIB::radiusAuthClientExtRoundTripTime,TimeTicks,read-only,,current,,The time interval (in hundredths of a second) between the most recent Access-Reply/Access-Challenge and the Access-Request that matched it from this RADIUS authentication server.
.1.3.6.1.2.1.67.1.2.1.1.4.1.6,RADIUS-AUTH-CLIENT-MIB::radiusAuthClientExtAccessRequests,Counter32,read-only,,current,,The number of RADIUS Access-Request packets sent to this server. This does not include retransmissions. This counter may experience a discontinuity when the RADIUS Client module within the managed entity is reinitialized, as indicated by the current value of radiusAuthClientCounterDiscontinuity.
.1.3.6.1.2.1.67.1.2.1.1.4.1.7,RADIUS-AUTH-CLIENT-MIB::radiusAuthClientExtAccessRetransmissions,Counter32,read-only,,current,,The number of RADIUS Access-Request packets retransmitted to this RADIUS authentication server. This counter may experience a discontinuity when the RADIUS Client module within the managed entity is reinitialized, as indicated by the current value of radiusAuthClientCounterDiscontinuity.
.1.3.6.1.2.1.67.1.2.1.1.4.1.8,RADIUS-AUTH-CLIENT-MIB::radiusAuthClientExtAccessAccepts,Counter32,read-only,,current,,The number of RADIUS Access-Accept packets (valid or invalid) received from this server. This counter may experience a discontinuity when the RADIUS Client module within the managed entity is reinitialized, as indicated by the current value of radiusAuthClientCounterDiscontinuity.
.1.3.6.1.2.1.67.1.2.1.1.4.1.9,RADIUS-AUTH-CLIENT-MIB::radiusAuthClientExtAccessRejects,Counter32,read-only,,current,,The number of RADIUS Access-Reject packets (valid or invalid) received from this server. This counter may experience a discontinuity when the RADIUS Client module within the managed entity is reinitialized, as indicated by the current value of radiusAuthClientCounterDiscontinuity.
.1.3.6.1.2.1.67.1.2.1.1.4.1.10,RADIUS-AUTH-CLIENT-MIB::radiusAuthClientExtAccessChallenges,Counter32,read-only,,current,,The number of RADIUS Access-Challenge packets (valid or invalid) received from this server. This counter may experience a discontinuity when the RADIUS Client module within the managed entity is reinitialized, as indicated by the current value of radiusAuthClientCounterDiscontinuity.
.1.3.6.1.2.1.67.1.2.1.1.4.1.11,RADIUS-AUTH-CLIENT-MIB::radiusAuthClientExtMalformedAccessResponses,Counter32,read-only,,current,,The number of malformed RADIUS Access-Response packets received from this server. Malformed packets include packets with an invalid length. Bad authenticators or Message Authenticator attributes or unknown types are not included as malformed access responses. This counter may experience a discontinuity when the RADIUS Client module within the managed entity is reinitialized, as indicated by the current value of radiusAuthClientCounterDiscontinuity.
.1.3.6.1.2.1.67.1.2.1.1.4.1.12,RADIUS-AUTH-CLIENT-MIB::radiusAuthClientExtBadAuthenticators,Counter32,read-only,,current,,The number of RADIUS Access-Response packets containing invalid authenticators or Message Authenticator attributes received from this server. This counter may experience a discontinuity when the RADIUS Client module within the managed entity is reinitialized, as indicated by the current value of radiusAuthClientCounterDiscontinuity.
.1.3.6.1.2.1.67.1.2.1.1.4.1.13,RADIUS-AUTH-CLIENT-MIB::radiusAuthClientExtPendingRequests,Gauge32,read-only,,current,,The number of RADIUS Access-Request packets destined for this server that have not yet timed out or received a response. This variable is incremented when an Access-Request is sent and decremented due to receipt of an Access-Accept, Access-Reject, Access-Challenge, timeout, or retransmission.
.1.3.6.1.2.1.67.1.2.1.1.4.1.14,RADIUS-AUTH-CLIENT-MIB::radiusAuthClientExtTimeouts,Counter32,read-only,,current,,The number of authentication timeouts to this server. After a timeout, the client may retry to the same server, send to a different server, or give up. A retry to the same server is counted as a retransmit as well as a timeout. A send to a different server is counted as a Request as well as a timeout. This counter may experience a discontinuity when the RADIUS Client module within the managed entity is reinitialized, as indicated by the current value of radiusAuthClientCounterDiscontinuity.
.1.3.6.1.2.1.67.1.2.1.1.4.1.15,RADIUS-AUTH-CLIENT-MIB::radiusAuthClientExtUnknownTypes,Counter32,read-only,,current,,The number of RADIUS packets of unknown type that were received from this server on the authentication port. This counter may experience a discontinuity when the RADIUS Client module within the managed entity is reinitialized, as indicated by the current value of radiusAuthClientCounterDiscontinuity.
.1.3.6.1.2.1.67.1.2.1.1.4.1.16,RADIUS-AUTH-CLIENT-MIB::radiusAuthClientExtPacketsDropped,Counter32,read-only,,current,,The number of RADIUS packets that were received from this server on the authentication port and dropped for some other reason. This counter may experience a discontinuity when the RADIUS Client module within the managed entity is reinitialized, as indicated by the current value of radiusAuthClientCounterDiscontinuity.
.1.3.6.1.2.1.67.1.2.1.1.4.1.17,RADIUS-AUTH-CLIENT-MIB::radiusAuthClientCounterDiscontinuity,TimeTicks,read-only,,current,,The number of centiseconds since the last discontinuity in the RADIUS Client counters. A discontinuity may be the result of a reinitialization of the RADIUS Client module within the managed entity.
.1.3.6.1.2.1.67.1.2.2,RADIUS-AUTH-CLIENT-MIB::radiusAuthClientMIBConformance,,,,,,
.1.3.6.1.2.1.67.1.2.2.1,RADIUS-AUTH-CLIENT-MIB::radiusAuthClientMIBCompliances,,,,,,
.1.3.6.1.2.1.67.1.2.2.1.1,RADIUS-AUTH-CLIENT-MIB::radiusAuthClientMIBCompliance,,,,,,The compliance statement for authentication clients implementing the RADIUS Authentication Client MIB. Implementation of this module is for IPv4-only entities, or for backwards compatibility use with entities that support both IPv4 and IPv6.
.1.3.6.1.2.1.67.1.2.2.1.2,RADIUS-AUTH-CLIENT-MIB::radiusAuthClientExtMIBCompliance,,,,,,The compliance statement for authentication clients implementing the RADIUS Authentication Client IPv6 Extensions MIB. Implementation of this module is for entities that support IPv6, or support IPv4 and IPv6.
.1.3.6.1.2.1.67.1.2.2.2,RADIUS-AUTH-CLIENT-MIB::radiusAuthClientMIBGroups,,,,,,
.1.3.6.1.2.1.67.1.2.2.2.1,RADIUS-AUTH-CLIENT-MIB::radiusAuthClientMIBGroup,,,,,,The basic collection of objects providing management of RADIUS Authentication Clients.
.1.3.6.1.2.1.67.1.2.2.2.2,RADIUS-AUTH-CLIENT-MIB::radiusAuthClientExtMIBGroup,,,,,,The collection of extended objects providing management of RADIUS Authentication Clients using version-neutral IP address format.
.1.3.6.1.2.1.67.2,RADIUS-ACC-CLIENT-MIB::radiusAccounting,,,,,,
.1.3.6.1.2.1.67.2.2,RADIUS-ACC-CLIENT-MIB::radiusAccClientMIB,,,,,,The MIB module for entities implementing the client side of the Remote Authentication Dial-In User Service (RADIUS) accounting protocol. Copyright (C) The Internet Society (2006). This version of this MIB module is part of RFC 4670; see the RFC itself for full legal notices.
.1.3.6.1.2.1.67.2.2.1,RADIUS-ACC-CLIENT-MIB::radiusAccClientMIBObjects,,,,,,
.1.3.6.1.2.1.67.2.2.1.1,RADIUS-ACC-CLIENT-MIB::radiusAccClient,,,,,,
.1.3.6.1.2.1.67.2.2.1.1.1,RADIUS-ACC-CLIENT-MIB::radiusAccClientInvalidServerAddresses,Counter32,read-only,,current,,The number of RADIUS Accounting-Response packets received from unknown addresses.
.1.3.6.1.2.1.67.2.2.1.1.2,RADIUS-ACC-CLIENT-MIB::radiusAccClientIdentifier,OCTET,read-only,,current,,The NAS-Identifier of the RADIUS accounting client. This is not necessarily the same as sysName in MIB II.
.1.3.6.1.2.1.67.2.2.1.1.3,RADIUS-ACC-CLIENT-MIB::radiusAccServerTable,,not-accessible,,deprecated,,The (conceptual) table listing the RADIUS accounting servers with which the client shares a secret.
.1.3.6.1.2.1.67.2.2.1.1.3.1,RADIUS-ACC-CLIENT-MIB::radiusAccServerEntry,,not-accessible,radiusAccServerIndex,deprecated,,An entry (conceptual row) representing a RADIUS accounting server with which the client shares a secret.
.1.3.6.1.2.1.67.2.2.1.1.3.1.1,RADIUS-ACC-CLIENT-MIB::radiusAccServerIndex,Integer32,not-accessible,,deprecated,,A number uniquely identifying each RADIUS Accounting server with which this client communicates.
.1.3.6.1.2.1.67.2.2.1.1.3.1.2,RADIUS-ACC-CLIENT-MIB::radiusAccServerAddress,IpAddress,read-only,,deprecated,,The IP address of the RADIUS accounting server referred to in this table entry.
.1.3.6.1.2.1.67.2.2.1.1.3.1.3,RADIUS-ACC-CLIENT-MIB::radiusAccClientServerPortNumber,Integer32,read-only,,deprecated,,The UDP port the client is using to send requests to this server.
.1.3.6.1.2.1.67.2.2.1.1.3.1.4,RADIUS-ACC-CLIENT-MIB::radiusAccClientRoundTripTime,TimeTicks,read-only,,deprecated,,The time interval between the most recent Accounting-Response and the Accounting-Request that matched it from this RADIUS accounting server.
.1.3.6.1.2.1.67.2.2.1.1.3.1.5,RADIUS-ACC-CLIENT-MIB::radiusAccClientRequests,Counter32,read-only,,deprecated,,The number of RADIUS Accounting-Request packets sent. This does not include retransmissions.
.1.3.6.1.2.1.67.2.2.1.1.3.1.6,RADIUS-ACC-CLIENT-MIB::radiusAccClientRetransmissions,Counter32,read-only,,deprecated,,The number of RADIUS Accounting-Request packets retransmitted to this RADIUS accounting server. Retransmissions include retries where the Identifier and Acct-Delay have been updated, as well as those in which they remain the same.
.1.3.6.1.2.1.67.2.2.1.1.3.1.7,RADIUS-ACC-CLIENT-MIB::radiusAccClientResponses,Counter32,read-only,,deprecated,,The number of RADIUS packets received on the accounting port from this server.
.1.3.6.1.2.1.67.2.2.1.1.3.1.8,RADIUS-ACC-CLIENT-MIB::radiusAccClientMalformedResponses,Counter32,read-only,,deprecated,,The number of malformed RADIUS Accounting-Response packets received from this server. Malformed packets include packets with an invalid length. Bad authenticators and unknown types are not included as malformed accounting responses.
.1.3.6.1.2.1.67.2.2.1.1.3.1.9,RADIUS-ACC-CLIENT-MIB::radiusAccClientBadAuthenticators,Counter32,read-only,,deprecated,,The number of RADIUS Accounting-Response packets that contained invalid authenticators received from this server.
.1.3.6.1.2.1.67.2.2.1.1.3.1.10,RADIUS-ACC-CLIENT-MIB::radiusAccClientPendingRequests,Gauge32,read-only,,deprecated,,The number of RADIUS Accounting-Request packets sent to this server that have not yet timed out or received a response. This variable is incremented when an Accounting-Request is sent and decremented due to receipt of an Accounting-Response, a timeout, or a retransmission.
.1.3.6.1.2.1.67.2.2.1.1.3.1.11,RADIUS-ACC-CLIENT-MIB::radiusAccClientTimeouts,Counter32,read-only,,deprecated,,The number of accounting timeouts to this server. After a timeout, the client may retry to the same server, send to a different server, or give up. A retry to the same server is counted as a retransmit as well as a timeout. A send to a different server is counted as an Accounting-Request as well as a timeout.
.1.3.6.1.2.1.67.2.2.1.1.3.1.12,RADIUS-ACC-CLIENT-MIB::radiusAccClientUnknownTypes,Counter32,read-only,,deprecated,,The number of RADIUS packets of unknown type that were received from this server on the accounting port.
.1.3.6.1.2.1.67.2.2.1.1.3.1.13,RADIUS-ACC-CLIENT-MIB::radiusAccClientPacketsDropped,Counter32,read-only,,deprecated,,The number of RADIUS packets that were received from this server on the accounting port and dropped for some other reason.
.1.3.6.1.2.1.67.2.2.1.1.4,RADIUS-ACC-CLIENT-MIB::radiusAccServerExtTable,,not-accessible,,current,,The (conceptual) table listing the RADIUS accounting servers with which the client shares a secret.
.1.3.6.1.2.1.67.2.2.1.1.4.1,RADIUS-ACC-CLIENT-MIB::radiusAccServerExtEntry,,not-accessible,radiusAccServerExtIndex,current,,An entry (conceptual row) representing a RADIUS accounting server with which the client shares a secret.
.1.3.6.1.2.1.67.2.2.1.1.4.1.1,RADIUS-ACC-CLIENT-MIB::radiusAccServerExtIndex,Integer32,not-accessible,,current,,A number uniquely identifying each RADIUS Accounting server with which this client communicates.
.1.3.6.1.2.1.67.2.2.1.1.4.1.2,RADIUS-ACC-CLIENT-MIB::radiusAccServerInetAddressType,INTEGER,read-only,,current,unknown(0):ipv4(1):ipv6(2):ipv4z(3):ipv6z(4):dns(16),The type of address format used for the radiusAccServerInetAddress object.
.1.3.6.1.2.1.67.2.2.1.1.4.1.3,RADIUS-ACC-CLIENT-MIB::radiusAccServerInetAddress,OCTET,read-only,,current,,The IP address of the RADIUS accounting server referred to in this table entry, using the version-neutral IP address format.
.1.3.6.1.2.1.67.2.2.1.1.4.1.4,RADIUS-ACC-CLIENT-MIB::radiusAccClientServerInetPortNumber,Unsigned32,read-only,,current,,The UDP port the client is using to send requests to this accounting server. The value zero (0) is invalid.
.1.3.6.1.2.1.67.2.2.1.1.4.1.5,RADIUS-ACC-CLIENT-MIB::radiusAccClientExtRoundTripTime,TimeTicks,read-only,,current,,The time interval between the most recent Accounting-Response and the Accounting-Request that matched it from this RADIUS accounting server.
.1.3.6.1.2.1.67.2.2.1.1.4.1.6,RADIUS-ACC-CLIENT-MIB::radiusAccClientExtRequests,Counter32,read-only,,current,,The number of RADIUS Accounting-Request packets sent. This does not include retransmissions. This counter may experience a discontinuity when the RADIUS Accounting Client module within the managed entity is reinitialized, as indicated by the current value of radiusAccClientCounterDiscontinuity.
.1.3.6.1.2.1.67.2.2.1.1.4.1.7,RADIUS-ACC-CLIENT-MIB::radiusAccClientExtRetransmissions,Counter32,read-only,,current,,The number of RADIUS Accounting-Request packets retransmitted to this RADIUS accounting server. Retransmissions include retries where the Identifier and Acct-Delay have been updated, as well as those in which they remain the same. This counter may experience a discontinuity when the RADIUS Accounting Client module within the managed entity is reinitialized, as indicated by the current value of radiusAccClientCounterDiscontinuity.
.1.3.6.1.2.1.67.2.2.1.1.4.1.8,RADIUS-ACC-CLIENT-MIB::radiusAccClientExtResponses,Counter32,read-only,,current,,The number of RADIUS packets received on the accounting port from this server. This counter may experience a discontinuity when the RADIUS Accounting Client module within the managed entity is reinitialized, as indicated by the current value of radiusAccClientCounterDiscontinuity.
.1.3.6.1.2.1.67.2.2.1.1.4.1.9,RADIUS-ACC-CLIENT-MIB::radiusAccClientExtMalformedResponses,Counter32,read-only,,current,,The number of malformed RADIUS Accounting-Response packets received from this server. Malformed packets include packets with an invalid length. Bad authenticators and unknown types are not included as malformed accounting responses. This counter may experience a discontinuity when the RADIUS Accounting Client module within the managed entity is reinitialized, as indicated by the current value of radiusAccClientCounterDiscontinuity.
.1.3.6.1.2.1.67.2.2.1.1.4.1.10,RADIUS-ACC-CLIENT-MIB::radiusAccClientExtBadAuthenticators,Counter32,read-only,,current,,The number of RADIUS Accounting-Response packets that contained invalid authenticators received from this server. This counter may experience a discontinuity when the RADIUS Accounting Client module within the managed entity is reinitialized, as indicated by the current value of radiusAccClientCounterDiscontinuity.
.1.3.6.1.2.1.67.2.2.1.1.4.1.11,RADIUS-ACC-CLIENT-MIB::radiusAccClientExtPendingRequests,Gauge32,read-only,,current,,The number of RADIUS Accounting-Request packets sent to this server that have not yet timed out or received a response. This variable is incremented when an Accounting-Request is sent and decremented due to receipt of an Accounting-Response, a timeout, or a retransmission. This counter may experience a discontinuity when the RADIUS Accounting Client module within the managed entity is reinitialized, as indicated by the current value of radiusAccClientCounterDiscontinuity.
.1.3.6.1.2.1.67.2.2.1.1.4.1.12,RADIUS-ACC-CLIENT-MIB::radiusAccClientExtTimeouts,Counter32,read-only,,current,,The number of accounting timeouts to this server. After a timeout, the client may retry to the same server, send to a different server, or give up. A retry to the same server is counted as a retransmit as well as a timeout. A send to a different server is counted as an Accounting-Request as well as a timeout. This counter may experience a discontinuity when the RADIUS Accounting Client module within the managed entity is reinitialized, as indicated by the current value of radiusAccClientCounterDiscontinuity.
.1.3.6.1.2.1.67.2.2.1.1.4.1.13,RADIUS-ACC-CLIENT-MIB::radiusAccClientExtUnknownTypes,Counter32,read-only,,current,,The number of RADIUS packets of unknown type that were received from this server on the accounting port. This counter may experience a discontinuity when the RADIUS Accounting Client module within the managed entity is reinitialized, as indicated by the current value of radiusAccClientCounterDiscontinuity.
.1.3.6.1.2.1.67.2.2.1.1.4.1.14,RADIUS-ACC-CLIENT-MIB::radiusAccClientExtPacketsDropped,Counter32,read-only,,current,,The number of RADIUS packets that were received from this server on the accounting port and dropped for some other reason. This counter may experience a discontinuity when the RADIUS Accounting Client module within the managed entity is reinitialized, as indicated by the current value of radiusAccClientCounterDiscontinuity.
.1.3.6.1.2.1.67.2.2.1.1.4.1.15,RADIUS-ACC-CLIENT-MIB::radiusAccClientCounterDiscontinuity,TimeTicks,read-only,,current,,The number of centiseconds since the last discontinuity in the RADIUS Accounting Client counters. A discontinuity may be the result of a reinitialization of the RADIUS Accounting Client module within the managed entity.
.1.3.6.1.2.1.67.2.2.2,RADIUS-ACC-CLIENT-MIB::radiusAccClientMIBConformance,,,,,,
.1.3.6.1.2.1.67.2.2.2.1,RADIUS-ACC-CLIENT-MIB::radiusAccClientMIBCompliances,,,,,,
.1.3.6.1.2.1.67.2.2.2.1.1,RADIUS-ACC-CLIENT-MIB::radiusAccClientMIBCompliance,,,,,,The compliance statement for accounting clients implementing the RADIUS Accounting Client MIB. Implementation of this module is for IPv4-only entities, or for backwards compatibility use with entities that support both IPv4 and IPv6.
.1.3.6.1.2.1.67.2.2.2.1.2,RADIUS-ACC-CLIENT-MIB::radiusAccClientExtMIBCompliance,,,,,,The compliance statement for accounting clients implementing the RADIUS Accounting Client IPv6 Extensions MIB. Implementation of this module is for entities that support IPv6, or support IPv4 and IPv6.
.1.3.6.1.2.1.67.2.2.2.2,RADIUS-ACC-CLIENT-MIB::radiusAccClientMIBGroups,,,,,,
.1.3.6.1.2.1.67.2.2.2.2.1,RADIUS-ACC-CLIENT-MIB::radiusAccClientMIBGroup,,,,,,The basic collection of objects providing management of RADIUS Accounting Clients.
.1.3.6.1.2.1.67.2.2.2.2.2,RADIUS-ACC-CLIENT-MIB::radiusAccClientExtMIBGroup,,,,,,The basic collection of objects providing management of RADIUS Accounting Clients.
.1.3.6.1.2.1.68,VRRP-MIB::vrrpMIB,,,,,,This MIB describes objects used for managing Virtual  Router Redundancy Protocol (VRRP) over IPv4 and IPv6  protocols.  This MIB supports VRRP for IPv4 and IPv6 protocols  simultaneously running on a given interface of a  router.   Copyright (C) The IETF Trust (2006).
.1.3.6.1.2.1.68.0,VRRP-MIB::vrrpNotifications,,,,,,
.1.3.6.1.2.1.68.0.1,VRRP-MIB::vrrpTrapNewMaster,,,,,,The newMaster trap indicates that the sending agent  has transitioned to 'Master' state.
.1.3.6.1.2.1.68.0.2,VRRP-MIB::vrrpTrapAuthFailure,,,,,,A vrrpAuthFailure trap signifies that a packet has  been received from a router whose authentication key  or authentication type conflicts with this router's  authentication key or authentication type. Implementation  of this trap is optional.  This object is deprecated in the IP Version MIB. 
.1.3.6.1.2.1.68.0.3,VRRP-MIB::vrrpTrapProtoError,,,,,,The error trap indicates that the sending agent has  encountered the protocol error indicated by  vrrpTrapProtoErrorReason.
.1.3.6.1.2.1.68.1,VRRP-MIB::vrrpOperations,,,,,,
.1.3.6.1.2.1.68.1.1,VRRP-MIB::vrrpNodeVersion,Integer32,read-only,,deprecated,,This value identifies the particular version of the VRRP  supported by this node.  This object is deprecated in the IP Version Independent  MIB.
.1.3.6.1.2.1.68.1.2,VRRP-MIB::vrrpNotificationCntl,INTEGER,read-write,,current,enabled(1):disabled(2),Indicates whether the VRRP-enabled router will generate  SNMP notifications for events defined in this MIB.  'Enabled' results in SNMP notifications; 'disabled', no  notifications are sent.
.1.3.6.1.2.1.68.1.3,VRRP-MIB::vrrpOperTable,,not-accessible,,deprecated,,Operations table for a VRRP router which consists of a  sequence (i.e., one or more conceptual rows) of  'vrrpOperEntry' items.  This table has been deprecated as a new IP version  neutral 'vrrpOperationsTable' has been added. 
.1.3.6.1.2.1.68.1.3.1,VRRP-MIB::vrrpOperEntry,,not-accessible,ifIndex:vrrpOperVrId,deprecated,,An entry in the vrrpOperTable containing the operational  characteristics of a virtual router. On a VRRP router,  a given virtual router is identified by a combination  of the IF index and VRID.  Rows in the table cannot be modified unless the value  of `vrrpOperAdminState' is `disabled' and the  `vrrpOperState' has transitioned to `initialize'.  This object is deprecated in favor of the IP Version  independent object, vrrpOperationsEntry
.1.3.6.1.2.1.68.1.3.1.1,VRRP-MIB::vrrpOperVrId,Integer32,not-accessible,,deprecated,,This object contains the Virtual Router Identifier  (VRID).  This object is deprecated in favor of the IP Version  independent object, vrrpOperationsVrId 
.1.3.6.1.2.1.68.1.3.1.2,VRRP-MIB::vrrpOperVirtualMacAddr,OCTET,read-only,,deprecated,,The virtual MAC address of the virtual router. Although  this object can be derived from the 'vrrpOperVrId' object,  it is defined so that it is easily obtainable by a  management application and can be included in VRRP-related  SNMP traps.  This object is deprecated in favor of the IP Version  Independent object, vrrpOperationsVirtualMacAddr.
.1.3.6.1.2.1.68.1.3.1.3,VRRP-MIB::vrrpOperState,INTEGER,read-only,,deprecated,initialize(1):backup(2):master(3),The current state of the virtual router. This object has  three defined values:  - `initialize', which indicates that all the  virtual router is waiting for a startup event.  - `backup', which indicates the virtual router is  monitoring the availability of the master router.  - `master', which indicates that the virtual router  is forwarding packets for IP addresses that are  associated with this router.  Setting the `vrrpOperAdminState' object (below) initiates  transitions in the value of this object.  This object is deprecated in favor of the IP Version  Independent object, vrrpOperationsState.
.1.3.6.1.2.1.68.1.3.1.4,VRRP-MIB::vrrpOperAdminState,INTEGER,read-create,,deprecated,up(1):down(2),This object will enable/disable the virtual router  function.   Setting the value to `up', will transition the state of  the virtual router from `initialize' to `backup' or  `master', depending on the value of `vrrpOperPriority'.   Setting the value to `down', will transition the router  from `master' or `backup' to `initialize'. State  transitions may not be immediate; they sometimes depend on  other factors, such as the interface (IF) state.   The `vrrpOperAdminState' object must be set to `down' prior  to modifying the other read-create objects in the  conceptual row. The value of the `vrrpOperRowStatus'  object (below) must be `active', signifying that the  conceptual row is valid (i.e., the objects are correctly  set), in order for this object to be set to `up'.   This object is deprecated in favor of the IP Version  Independent object, vrrpOperationsState.
.1.3.6.1.2.1.68.1.3.1.5,VRRP-MIB::vrrpOperPriority,Integer32,read-create,,deprecated,,This object specifies the priority to be used for the  virtual router master election process. Higher values  imply higher priority.  A priority of '0', although not settable, is sent by  the master router to indicate that this router has ceased  to participate in VRRP and a backup virtual router should  transition to become a new master.  A priority of 255 is used for the router that owns the  associated IP address(es).  This object is deprecated in favor of the IP Version  Independent object, vrrpOperationsPriority.
.1.3.6.1.2.1.68.1.3.1.6,VRRP-MIB::vrrpOperIpAddrCount,Integer32,read-only,,deprecated,,The number of IP addresses that are associated with this  virtual router. This number is equal to the number of  rows in the vrrpAssoIpAddrTable that correspond to a  given IF index/VRID pair.  This object is deprecated in favor of the IP Version  Independent object, vrrpOperationsAddrCount.
.1.3.6.1.2.1.68.1.3.1.7,VRRP-MIB::vrrpOperMasterIpAddr,IpAddress,read-only,,deprecated,,The master router's real (primary) IP address. This is  the IP address listed as the source in VRRP advertisement  last received by this virtual router.  This object is deprecated in favor of the IP Version  Independent object, vrrpOperationsMasterIpAddr.
.1.3.6.1.2.1.68.1.3.1.8,VRRP-MIB::vrrpOperPrimaryIpAddr,IpAddress,read-create,,deprecated,,In the case where there is more than one IP address for  a given `ifIndex', this object is used to specify the IP  address that will become the `vrrpOperMasterIpAddr',  should the virtual router transition from backup to  master. If this object is set to 0.0.0.0, the IP address  which is numerically lowest (of all the associated IP  address for the interface) will be selected.  This object is deprecated in favor of the IP Version  Independent object, vrrpOperationsPrimaryIpAddr.
.1.3.6.1.2.1.68.1.3.1.9,VRRP-MIB::vrrpOperAuthType,INTEGER,read-create,,deprecated,noAuthentication(1):simpleTextPassword(2):ipAuthenticationHeader(3),Authentication type used for VRRP protocol exchanges  between virtual routers. This value of this object is the  same for a given ifIndex.  New enumerations to this list can only be added via a new  RFC on the standards track.  This object is deprecated in the IP Version MIB.
.1.3.6.1.2.1.68.1.3.1.10,VRRP-MIB::vrrpOperAuthKey,OCTET,read-create,,deprecated,,The Authentication Key. This object is set according to  the value of the 'vrrpOperAuthType' object  ('simpleTextPassword' or 'ipAuthenticationHeader'). If  the length of the value is less than 16 octets, the agent  will left adjust and zero fill to 16 octets. The value of  this object is the same for a given ifIndex.  When read, vrrpOperAuthKey always returns an Octet String  of length zero.  This object is deprecated in the IP Version MIB.
.1.3.6.1.2.1.68.1.3.1.11,VRRP-MIB::vrrpOperAdvertisementInterval,Integer32,read-create,,deprecated,,The time interval, in seconds, between sending  advertisement messages. Only the master router sends  VRRP advertisements.  This object is deprecated in favor of the IP Version  Independent object, vrrpOperationsAdvInterval. 
.1.3.6.1.2.1.68.1.3.1.12,VRRP-MIB::vrrpOperPreemptMode,INTEGER,read-create,,deprecated,true(1):false(2),Controls whether a higher priority virtual router will  preempt a lower priority master.  This object is deprecated in favor of the IP Version  Independent object, vrrpOperationsPreemptMode. 
.1.3.6.1.2.1.68.1.3.1.13,VRRP-MIB::vrrpOperVirtualRouterUpTime,TimeTicks,read-only,,deprecated,,This is the value of the `sysUpTime' object when this  virtual router (i.e., the `vrrpOperState') transitioned  out of `initialized'.  This object is deprecated in favor of the IP Version  Independent object, vrrpOperationsUpTime.
.1.3.6.1.2.1.68.1.3.1.14,VRRP-MIB::vrrpOperProtocol,INTEGER,read-create,,deprecated,ip(1):bridge(2):decnet(3):other(4),The particular protocol being controlled by this Virtual  Router.  New enumerations to this list can only be added via a new  RFC on the standards track.  This object is deprecated in the IP Version Independent  MIB.
.1.3.6.1.2.1.68.1.3.1.15,VRRP-MIB::vrrpOperRowStatus,INTEGER,read-create,,deprecated,active(1):notInService(2):notReady(3):createAndGo(4):createAndWait(5):destroy(6),The RowStatus variable, used in accordance to  installation and removal conventions for conceptual rows.  The RowStatus of a currently active row in the  vrrpOperTable is constrained by the operational state of  the corresponding virtual router.  When `vrrpOperRowStatus' is set to active(1), no other  objects in the conceptual row, with the exception of  `vrrpOperAdminState', can be modified. Prior to setting  the `vrrpOperRowStatus' object from `active' to a  different value, the `vrrpOperAdminState' object must be  set to `down' and the `vrrpOperState' object be  transitioned to `initialize'.  To create a row in this table, a manager sets this object  to either createAndGo(4) or createAndWait(5). Until  instances of all corresponding columns are appropriately  configured, the value of the corresponding instance of the  `vrrpOperRowStatus' column will be read as notReady(3).  In particular, a newly created row cannot be made  active(1) until (minimally) the corresponding instance of  `vrrpOperVrId' has been set and there is at least one  active row in the `vrrpAssoIpAddrTable' defining an  associated IP address for the virtual router.  This object is deprecated in favor of the IP Version  Independent object, vrrpOperationsRowStatus. 
.1.3.6.1.2.1.68.1.4,VRRP-MIB::vrrpAssoIpAddrTable,,not-accessible,,deprecated,,The table of addresses associated with this virtual  router.  This object is deprecated in favor of the IP Version  Independent object, vrrpAssociatedIpAddrTable. 
.1.3.6.1.2.1.68.1.4.1,VRRP-MIB::vrrpAssoIpAddrEntry,,not-accessible,ifIndex:vrrpOperVrId:vrrpAssoIpAddr,deprecated,,An entry in the table contains an IP address that is  associated with a virtual router. The number of rows for  a given ifIndex and VrId will equal the number of IP  addresses associated (e.g., backed up) by the virtual  router (equivalent to 'vrrpOperIpAddrCount').  Rows in the table cannot be modified unless the value  of `vrrpOperAdminState' is `disabled' and the  `vrrpOperState' has transitioned to `initialize'.  This object is deprecated in favor of the IP Version  Independent object, vrrpAssociatedIpAddrEntry.
.1.3.6.1.2.1.68.1.4.1.1,VRRP-MIB::vrrpAssoIpAddr,IpAddress,not-accessible,,deprecated,,The assigned IP addresses that a virtual router is  responsible for backing up.  This object is deprecated in favor of the IP Version  Independent object, vrrpAssociatedIpAddr.
.1.3.6.1.2.1.68.1.4.1.2,VRRP-MIB::vrrpAssoIpAddrRowStatus,INTEGER,read-create,,deprecated,active(1):notInService(2):notReady(3):createAndGo(4):createAndWait(5):destroy(6),The row status variable, used according to installation  and removal conventions for conceptual rows. Setting this  object to active(1) or createAndGo(4) results in the  addition of an associated address for a virtual router.  Destroying the entry or setting it to notInService(2)  removes the associated address from the virtual router.  The use of other values is implementation-dependent.  This object is deprecated in favor of the IP Version  Independent object, vrrpAssociatedIpAddrRowStatus.
.1.3.6.1.2.1.68.1.5,VRRP-MIB::vrrpTrapPacketSrc,IpAddress,accessible-for-notify,,deprecated,,The IP address of an inbound VRRP packet. Used by  vrrpTrapAuthFailure trap.  This object is deprecated in the IP Version MIB. 
.1.3.6.1.2.1.68.1.6,VRRP-MIB::vrrpTrapAuthErrorType,INTEGER,accessible-for-notify,,deprecated,invalidAuthType(1):authTypeMismatch(2):authFailure(3),Potential types of configuration conflicts.  Used by vrrpAuthFailure trap.  This object is deprecated in the IP Version MIB. 
.1.3.6.1.2.1.68.1.7,VRRP-MIB::vrrpOperationsTable,,not-accessible,,current,,Unified Operations table for a VRRP router which  consists of a sequence (i.e., one or more conceptual  rows) of 'vrrpOperationsEntry' items which describe  the operational characteristics of a virtual router.
.1.3.6.1.2.1.68.1.7.1,VRRP-MIB::vrrpOperationsEntry,,not-accessible,vrrpOperationsInetAddrType:vrrpOperationsVrId:ifIndex,current,,An entry in the vrrpOperationsTable containing the  operational characteristics of a virtual router. On a  VRRP router, a given virtual router is identified by a  combination of the IP version, VRID and ifIndex.  ifIndex represents a physical interface of the router.   Note that rows in this table can be distinguished on a  multi-stacked device running VRRP over IPv4 and  IPv6 on the same physical interface.   Rows in the table cannot be modified unless the value  of 'vrrpOperationsState' has transitioned to  'initialize'
.1.3.6.1.2.1.68.1.7.1.1,VRRP-MIB::vrrpOperationsInetAddrType,INTEGER,not-accessible,,current,unknown(0):ipv4(1):ipv6(2):ipv4z(3):ipv6z(4):dns(16),The IP address type of VrrpOperationsEntry. This value  applies to both vrrpOperationsMasterIpAddr and  vrrpOperationsPrimaryIpAddr.
.1.3.6.1.2.1.68.1.7.1.2,VRRP-MIB::vrrpOperationsVrId,Integer32,not-accessible,,current,,This object contains the Virtual Router Identifier  (VRID).
.1.3.6.1.2.1.68.1.7.1.3,VRRP-MIB::vrrpOperationsVirtualMacAddr,OCTET,read-only,,current,,The virtual MAC address of the virtual router.  Although this object can be derived from the  'vrrpOperationsVrId' object, it is defined so that it  is easily obtainable by a management application and  can be included in VRRP-related SNMP notifications.
.1.3.6.1.2.1.68.1.7.1.4,VRRP-MIB::vrrpOperationsState,INTEGER,read-only,,current,initialize(1):backup(2):master(3),The current state of the virtual router. This object  has three defined values:   - `initialize', which indicates that the  virtual router is waiting for a startup event.   - `backup', which indicates the virtual router is  monitoring the availability of the master router.   - `master', which indicates that the virtual router  is forwarding packets for IP addresses that are  associated with this router.
.1.3.6.1.2.1.68.1.7.1.5,VRRP-MIB::vrrpOperationsPriority,Unsigned32,read-create,,current,,This object specifies the priority to be used for the  virtual router master election process. Higher values  imply higher priority.   A priority of '0', although not settable, is sent by  the master router to indicate that this router has  ceased to participate in VRRP and a backup virtual  router should transition to become a new master.   A priority of 255 is used for the router that owns the  associated IP address(es) for VRRP over IPv4 and hence  not settable.  A 'badValue(3)' should be returned when a user tries to  set 0 or 255 for this object. 
.1.3.6.1.2.1.68.1.7.1.6,VRRP-MIB::vrrpOperationsAddrCount,Integer32,read-only,,current,,The number of IP addresses that are associated with  this virtual router. This number is equal to the  number of rows in the vrrpAssociatedAddrTable that  correspond to a given IP version/VRID/ifIndex.
.1.3.6.1.2.1.68.1.7.1.7,VRRP-MIB::vrrpOperationsMasterIpAddr,OCTET,read-only,,current,,The master router's real IP address. Master router  would set this address to vrrpOperationsPrimaryIpAddr  while transitioning to master state. For backup  routers, this is the IP address listed as the source in  VRRP advertisement last received by this virtual  router.
.1.3.6.1.2.1.68.1.7.1.8,VRRP-MIB::vrrpOperationsPrimaryIpAddr,OCTET,read-create,,current,,In the case where there are more than one IP  Address (associated IP addresses) for a given  `ifIndex', this object is used to specify the IP  address that will become the  vrrpOperationsMasterIpAddr', should the virtual router  transition from backup state to master.
.1.3.6.1.2.1.68.1.7.1.9,VRRP-MIB::vrrpOperationsAdvInterval,INTEGER,read-create,,current,,The time interval, in centiseconds, between sending  advertisement messages. Only the master router sends  VRRP advertisements.
.1.3.6.1.2.1.68.1.7.1.10,VRRP-MIB::vrrpOperationsPreemptMode,INTEGER,read-create,,current,true(1):false(2),Controls whether a higher priority virtual router will  preempt a lower priority master.
.1.3.6.1.2.1.68.1.7.1.11,VRRP-MIB::vrrpOperationsAcceptMode,INTEGER,read-create,,current,true(1):false(2),Controls whether a virtual router in Master state  will accept packets addressed to the address owner's  IPv6 address as its own if it is not the IPv6 address  owner. Default is False.  This object is not relevant for rows representing VRRP  over IPv4 and should be set to false.
.1.3.6.1.2.1.68.1.7.1.12,VRRP-MIB::vrrpOperationsUpTime,TimeTicks,read-only,,current,,This is the value of the `sysUpTime' object when this  virtual router (i.e., the `vrrpOperationsState')  transitioned out of `initialized'.
.1.3.6.1.2.1.68.1.7.1.13,VRRP-MIB::vrrpOperationsStorageType,INTEGER,read-create,,current,other(1):volatile(2):nonVolatile(3):permanent(4):readOnly(5),The storage type for this conceptual row. Write access  is not required. It is optional to support nonVolatile  StorageType enumeration.
.1.3.6.1.2.1.68.1.7.1.14,VRRP-MIB::vrrpOperationsRowStatus,INTEGER,read-create,,current,active(1):notInService(2):notReady(3):createAndGo(4):createAndWait(5):destroy(6),The RowStatus variable should be used in accordance to  installation and removal conventions for conceptual  rows. When `vrrpOperationsRowStatus' is set to  active(1), no other objects in the conceptual row can  be modified.   To create a row in this table, a manager sets this  object to either createAndGo(4) or createAndWait(5).  Until instances of all corresponding columns are  appropriately configured, the value of the  corresponding instance of the `vrrpOperationsRowStatus'  column will be read as notReady(3).  In particular, a newly created row cannot be made  active(1) until (minimally) the corresponding instance  of vrrpOperationsInetAddrType, vrrpOperationsVrId and  vrrpOperationsPrimaryIpAddr has been set and there is  at least one active row in the  `vrrpAssociatedIpAddrTable' defining an associated  IP address.  notInService(2) should be used to administratively  bring the row down.  A typical order of operation to add a row is:  1. Create a row in vrrpOperationsTable with  createAndWait(5).  2. Create one or more corresponding rows in  vrrpAssociatedIpAddrTable.  3. Populate the vrrpOperationsEntry.  4. set vrrpOperationsRowStatus to active(1).  A typical order of operation to delete an entry is:  1. Set vrrpOperationsRowStatus to notInService(2).  2. Set the corresponding rows in  vrrpAssociatedIpAddrTable to destroy(6) to delete the  entry.  3. set vrrpOperationsRowStatus to destroy(6) to delete  the entry.
.1.3.6.1.2.1.68.1.8,VRRP-MIB::vrrpAssociatedIpAddrTable,,not-accessible,,current,,The table of addresses associated with this virtual  router.
.1.3.6.1.2.1.68.1.8.1,VRRP-MIB::vrrpAssociatedIpAddrEntry,,not-accessible,vrrpOperationsInetAddrType:vrrpOperationsVrId:ifIndex:vrrpAssociatedIpAddr,current,,An entry in the table contains an IP address that is  associated with a virtual router. The number of rows  for a given IP version, VrID and ifIndex will equal the  number of IP addresses associated (e.g., backed up) by  the virtual router (equivalent to  'vrrpOperationsIpAddrCount').   Rows in the table cannot be modified unless the value  of `vrrpOperationsState' has transitioned to  `initialize'.
.1.3.6.1.2.1.68.1.8.1.1,VRRP-MIB::vrrpAssociatedIpAddr,OCTET,not-accessible,,current,,The assigned IP addresses that a virtual router is  responsible for backing up.  The size of this object is either 4 or 16 depending on  vrrpOperationsInetAddrType.
.1.3.6.1.2.1.68.1.8.1.2,VRRP-MIB::vrrpAssociatedStorageType,INTEGER,read-create,,current,other(1):volatile(2):nonVolatile(3):permanent(4):readOnly(5),The storage type for this conceptual row. Write access  is not required. It is optional to support nonVolatile  StorageType enumeration.
.1.3.6.1.2.1.68.1.8.1.3,VRRP-MIB::vrrpAssociatedIpAddrRowStatus,INTEGER,read-create,,current,active(1):notInService(2):notReady(3):createAndGo(4):createAndWait(5):destroy(6),The RowStatus variable, used according to  installation and removal conventions for conceptual  rows. To create a row in this table, a manager sets  this object to either createAndGo(4) or  createAndWait(5). Setting this object to active(1)  results in the addition of an associated address for a  virtual router. Setting this object to notInService(2)  results in administratively bringing down the row.  Destroying the entry or setting it to destroy(6)  removes the associated address from the virtual router.  The use of other values is implementation-dependent.  Only vrrpAssociatedStorageType can be modified when the  row is in active(1) state for Implementations  supporting write access to vrrpAssociatedStorageType  Implementations should not allow deletion of the last  row corresponding to an active row in  vrrpOperationsTable.  Refer to description of vrrpOperationsRowStatus for a  typical row creation and deletion scenarios.
.1.3.6.1.2.1.68.1.9,VRRP-MIB::vrrpNewMasterReason,INTEGER,read-only,,current,notmaster(0):priority(1):preempted(2):masterNoResponse(3),This indicates the reason for vrrpNewMaster trap.  Used by vrrpTrapNewMaster trap. The object can be  polled if the vrrpNewMaster trap is lost to identify  the reason for transmission. Backup router should  return notmaster(0) when pooled. 
.1.3.6.1.2.1.68.1.10,VRRP-MIB::vrrpTrapProtoErrReason,INTEGER,accessible-for-notify,,current,hopLimitError(0):versionError(1):checksumError(2):vridError(3),This indicates the reason for protocol error trap.  Used by vrrpTrapProtoError trap.
.1.3.6.1.2.1.68.2,VRRP-MIB::vrrpStatistics,,,,,,
.1.3.6.1.2.1.68.2.1,VRRP-MIB::vrrpRouterChecksumErrors,Counter32,read-only,,current,,The total number of VRRP packets received with an  invalid VRRP checksum value.
.1.3.6.1.2.1.68.2.2,VRRP-MIB::vrrpRouterVersionErrors,Counter32,read-only,,current,,The total number of VRRP packets received with an  unknown or unsupported version number.
.1.3.6.1.2.1.68.2.3,VRRP-MIB::vrrpRouterVrIdErrors,Counter32,read-only,,current,,The total number of VRRP packets received with an  invalid VRID for this virtual router.
.1.3.6.1.2.1.68.2.4,VRRP-MIB::vrrpRouterStatsTable,,not-accessible,,deprecated,,Table of virtual router statistics.  This object is deprecated in favor of the IP Version  Independent object, vrrpRouterStatisticsTable.
.1.3.6.1.2.1.68.2.4.1,VRRP-MIB::vrrpRouterStatsEntry,,not-accessible,,deprecated,,An entry in the table, containing statistics information  about a given virtual router.  This object is deprecated in favor of the IP Version  Independent object, vrrpRouterStatisticsEntry.
.1.3.6.1.2.1.68.2.4.1.1,VRRP-MIB::vrrpStatsBecomeMaster,Counter32,read-only,,deprecated,,The total number of times that this virtual router's  state has transitioned to MASTER.  This object is deprecated in favor of the IP Version  Independent object, vrrpStatisticsMasterTransitions.
.1.3.6.1.2.1.68.2.4.1.2,VRRP-MIB::vrrpStatsAdvertiseRcvd,Counter32,read-only,,deprecated,,The total number of VRRP advertisements received by this  virtual router.  This object is deprecated in favor of the IP Version  Independent object, vrrpStatisticsRcvdAdvertisements.
.1.3.6.1.2.1.68.2.4.1.3,VRRP-MIB::vrrpStatsAdvertiseIntervalErrors,Counter32,read-only,,deprecated,,The total number of VRRP advertisement packets received  for which the advertisement interval is different than the  one configured for the local virtual router.  This object is deprecated in favor of the IP Version  Independent object, vrrpStatisticsAdvIntervalErrors.
.1.3.6.1.2.1.68.2.4.1.4,VRRP-MIB::vrrpStatsAuthFailures,Counter32,read-only,,deprecated,,The total number of VRRP packets received that do not  pass the authentication check.  This object is deprecated in the IP Version MIB.
.1.3.6.1.2.1.68.2.4.1.5,VRRP-MIB::vrrpStatsIpTtlErrors,Counter32,read-only,,deprecated,,The total number of VRRP packets received by the virtual  router with IP TTL (Time-To-Live) not equal to 255.  This object is deprecated in favor of the IP Version  Independent object, vrrpStatisticsIpTtlErrors.
.1.3.6.1.2.1.68.2.4.1.6,VRRP-MIB::vrrpStatsPriorityZeroPktsRcvd,Counter32,read-only,,deprecated,,The total number of VRRP packets received by the virtual  router with a priority of '0'.  This object is deprecated in favor of the IP Version  Independent object, vrrpStatisticsRcvdPriZeroPackets.
.1.3.6.1.2.1.68.2.4.1.7,VRRP-MIB::vrrpStatsPriorityZeroPktsSent,Counter32,read-only,,deprecated,,The total number of VRRP packets sent by the virtual  router with a priority of '0'.  This object is deprecated in favor of the IP Version  Independent object, vrrpStatisticsSentPriZeroPackets. 
.1.3.6.1.2.1.68.2.4.1.8,VRRP-MIB::vrrpStatsInvalidTypePktsRcvd,Counter32,read-only,,deprecated,,The number of VRRP packets received by the virtual router  with an invalid value in the 'type' field.  This object is deprecated in favor of the IP Version  Independent object, vrrpStatisticsRcvdInvalidTypePkts. 
.1.3.6.1.2.1.68.2.4.1.9,VRRP-MIB::vrrpStatsAddressListErrors,Counter32,read-only,,deprecated,,The total number of packets received for which the  address list does not match the locally configured list  for the virtual router.  This object is deprecated in favor of the IP Version  Independent object, vrrpStatisticsAddressListErrors.
.1.3.6.1.2.1.68.2.4.1.10,VRRP-MIB::vrrpStatsInvalidAuthType,Counter32,read-only,,deprecated,,The total number of packets received with an unknown  authentication type.  This object is deprecated in favor of the IP Version  Independent object, vrrpStatisticsPacketLengthErrors.
.1.3.6.1.2.1.68.2.4.1.11,VRRP-MIB::vrrpStatsAuthTypeMismatch,Counter32,read-only,,deprecated,,The total number of packets received with 'Auth Type' not  equal to the locally configured authentication method  (`vrrpOperAuthType').  This object is deprecated in favor of the IP Version  Independent object,  vrrpStatisticsRcvdInvalidAuthentications.
.1.3.6.1.2.1.68.2.4.1.12,VRRP-MIB::vrrpStatsPacketLengthErrors,Counter32,read-only,,deprecated,,The total number of packets received with a packet length  less than the length of the VRRP header.  This object is deprecated in favor of the IP Version  Independent object, vrrpStatisticsPacketLengthErrors. 
.1.3.6.1.2.1.68.2.5,VRRP-MIB::vrrpRouterStatisticsTable,,not-accessible,,current,,Table of virtual router statistics.
.1.3.6.1.2.1.68.2.5.1,VRRP-MIB::vrrpRouterStatisticsEntry,,not-accessible,,current,,An entry in the table, containing statistics  information about a given virtual router.
.1.3.6.1.2.1.68.2.5.1.1,VRRP-MIB::vrrpStatisticsMasterTransitions,Counter32,read-only,,current,,The total number of times that this virtual router's  state has transitioned to MASTER.   Discontinuities in the value of this counter can occur  at re-initialization of the management system, and at  other times as indicated by the value of  vrrpStatisticsDiscontinuityTime.
.1.3.6.1.2.1.68.2.5.1.2,VRRP-MIB::vrrpStatisticsRcvdAdvertisements,Counter32,read-only,,current,,The total number of VRRP advertisements received by  this virtual router.   Discontinuities in the value of this counter can occur  at re-initialization of the management system, and at  other times as indicated by the value of  vrrpStatisticsDiscontinuityTime.
.1.3.6.1.2.1.68.2.5.1.3,VRRP-MIB::vrrpStatisticsAdvIntervalErrors,Counter32,read-only,,current,,The total number of VRRP advertisement packets  received for which the advertisement interval is  different than the one configured for the local virtual  router.   Discontinuities in the value of this counter can occur  at re-initialization of the management system, and at  other times as indicated by the value of  vrrpStatisticsDiscontinuityTime.
.1.3.6.1.2.1.68.2.5.1.4,VRRP-MIB::vrrpStatisticsIpTtlErrors,Counter32,read-only,,current,,The total number of VRRP packets received by the  Virtual router with IPv4 TTL (for VRRP over IPv4) or  IPv6 Hop Limit (for VRRP over IPv6) not equal to 255.   Discontinuities in the value of this counter can occur  at re-initialization of the management system, and at  other times as indicated by the value of  vrrpStatisticsDiscontinuityTime.
.1.3.6.1.2.1.68.2.5.1.5,VRRP-MIB::vrrpStatisticsRcvdPriZeroPackets,Counter32,read-only,,current,,The total number of VRRP packets received by the  virtual router with a priority of '0'.   Discontinuities in the value of this counter can occur  at re-initialization of the management system, and at  other times as indicated by the value of  vrrpStatisticsDiscontinuityTime.
.1.3.6.1.2.1.68.2.5.1.6,VRRP-MIB::vrrpStatisticsSentPriZeroPackets,Counter32,read-only,,current,,The total number of VRRP packets sent by the virtual  router with a priority of '0'.   Discontinuities in the value of this counter can occur  at re-initialization of the management system, and at  other times as indicated by the value of  vrrpStatisticsDiscontinuityTime.
.1.3.6.1.2.1.68.2.5.1.7,VRRP-MIB::vrrpStatisticsRcvdInvalidTypePkts,Counter32,read-only,,current,,The number of VRRP packets received by the virtual  router with an invalid value in the 'type' field.   Discontinuities in the value of this counter can occur  at re-initialization of the management system, and at  other times as indicated by the value of  vrrpStatisticsDiscontinuityTime.
.1.3.6.1.2.1.68.2.5.1.8,VRRP-MIB::vrrpStatisticsAddressListErrors,Counter32,read-only,,current,,The total number of packets received for which the  address list does not match the locally configured list  for the virtual router.   Discontinuities in the value of this counter can occur  at re-initialization of the management system, and at  other times as indicated by the value of  vrrpStatisticsDiscontinuityTime.
.1.3.6.1.2.1.68.2.5.1.9,VRRP-MIB::vrrpStatisticsPacketLengthErrors,Counter32,read-only,,current,,The total number of packets received with a packet  length less than the length of the VRRP header.   Discontinuities in the value of this counter can occur  at re-initialization of the management system, and at  other times as indicated by the value of  vrrpStatisticsDiscontinuityTime.
.1.3.6.1.2.1.68.2.5.1.10,VRRP-MIB::vrrpStatisticsRcvdInvalidAuthentications,Counter32,read-only,,current,,The total number of packets received with an unknown  authentication type.
.1.3.6.1.2.1.68.2.5.1.11,VRRP-MIB::vrrpStatisticsDiscontinuityTime,TimeTicks,read-only,,current,,The value of sysUpTime on the most recent occasion at  which any one or more of this entry's counters suffered  a discontinuity.   If no such discontinuities have occurred since the last  re-initialization of the local management subsystem,  then this object contains a zero value.
.1.3.6.1.2.1.68.2.5.1.12,VRRP-MIB::vrrpStatisticsRefreshRate,Unsigned32,read-only,,current,,The minimum reasonable polling interval for this entry.  This object provides an indication of the minimum  Amount of time required to update the counters in this  entry.
.1.3.6.1.2.1.68.3,VRRP-MIB::vrrpConformance,,,,,,
.1.3.6.1.2.1.68.3.1,VRRP-MIB::vrrpMIBCompliances,,,,,,
.1.3.6.1.2.1.68.3.1.1,VRRP-MIB::vrrpMIBCompliance,,,,,,This compliance is deprecated in favour of  vrrpModuleFullCompliance.
.1.3.6.1.2.1.68.3.1.2,VRRP-MIB::vrrpModuleFullCompliance,,,,,,The compliance statement for both VRRP for IPv4 and  VRRP for IPv6 implementations.
.1.3.6.1.2.1.68.3.1.3,VRRP-MIB::vrrpModuleReadOnlyCompliance,,,,,,When this MIB is implemented without support for read-  create (i.e. in read-only mode), then such an  implementation can claim read-only compliance. Such a  device can then be monitored but can not be configured  with this MIB.
.1.3.6.1.2.1.68.3.2,VRRP-MIB::vrrpMIBGroups,,,,,,
.1.3.6.1.2.1.68.3.2.1,VRRP-MIB::vrrpOperGroup,,,,,,Conformance group for VRRP operations.
.1.3.6.1.2.1.68.3.2.2,VRRP-MIB::vrrpStatsGroup,,,,,,Conformance group for VRRP statistics.
.1.3.6.1.2.1.68.3.2.3,VRRP-MIB::vrrpTrapGroup,,,,,,Conformance group for objects contained in VRRP  notifications.
.1.3.6.1.2.1.68.3.2.4,VRRP-MIB::vrrpNotificationGroup,,,,,,The VRRP MIB Notification Group.
.1.3.6.1.2.1.68.3.2.5,VRRP-MIB::vrrpOperationsGroup,,,,,,Conformance group for VRRP over IPv4 and IPv6  operations.
.1.3.6.1.2.1.68.3.2.6,VRRP-MIB::vrrpStatisticsGroup,,,,,,Conformance group for VRRP over IPv4 and IPv6  statistics.
.1.3.6.1.2.1.68.3.2.7,VRRP-MIB::vrrpTrapInfoGroup,,,,,,Conformance group for objects contained in VRRP  notifications.
.1.3.6.1.2.1.68.3.2.8,VRRP-MIB::vrrpNotificationsGroup,,,,,,The VRRP MIB Notification Group.
.1.3.6.1.2.1.72,IANA-ADDRESS-FAMILY-NUMBERS-MIB::ianaAddressFamilyNumbers,,,,,,The MIB module defines the AddressFamilyNumbers textual convention.
.1.3.6.1.2.1.76,INET-ADDRESS-MIB::inetAddressMIB,,,,,,This MIB module defines textual conventions for representing Internet addresses. An Internet address can be an IPv4 address, an IPv6 address, or a DNS domain name. This module also defines textual conventions for Internet port numbers, autonomous system numbers, and the length of an Internet address prefix. Copyright (C) The Internet Society (2005). This version of this MIB module is part of RFC 4001, see the RFC itself for full legal notices.
.1.3.6.1.2.1.78,HCNUM-TC::hcnumTC,,,,,,A MIB module containing textual conventions for high capacity data types. This module addresses an immediate need for data types not directly supported in the SMIv2. This short-term solution is meant to be deprecated as a long-term solution is deployed.
.1.3.6.1.2.1.80,DISMAN-PING-MIB::pingMIB,,,,,,The Ping MIB (DISMAN-PING-MIB) provides the capability of controlling the use of the ping function at a remote host. Copyright (C) The Internet Society (2006). This version of this MIB module is part of RFC 4560; see the RFC itself for full legal notices.
.1.3.6.1.2.1.80.0,DISMAN-PING-MIB::pingNotifications,,,,,,
.1.3.6.1.2.1.80.0.1,DISMAN-PING-MIB::pingProbeFailed,,,,,,Generated when a probe failure is detected, when the corresponding pingCtlTrapGeneration object is set to probeFailure(0), subject to the value of pingCtlTrapProbeFailureFilter. The object pingCtlTrapProbeFailureFilter can be used to specify the number of consecutive probe failures that are required before this notification can be generated.
.1.3.6.1.2.1.80.0.2,DISMAN-PING-MIB::pingTestFailed,,,,,,Generated when a ping test is determined to have failed, when the corresponding pingCtlTrapGeneration object is set to testFailure(1). In this instance, pingCtlTrapTestFailureFilter should specify the number of probes in a test required to have failed in order to consider the test failed.
.1.3.6.1.2.1.80.0.3,DISMAN-PING-MIB::pingTestCompleted,,,,,,Generated at the completion of a ping test when the corresponding pingCtlTrapGeneration object has the testCompletion(2) bit set.
.1.3.6.1.2.1.80.1,DISMAN-PING-MIB::pingObjects,,,,,,
.1.3.6.1.2.1.80.1.1,DISMAN-PING-MIB::pingMaxConcurrentRequests,Unsigned32,read-write,,current,,The maximum number of concurrent active ping requests that are allowed within an agent implementation. A value of 0 for this object implies that there is no limit for the number of concurrent active requests in effect. The limit applies only to new requests being activated. When a new value is set, the agent will continue processing all the requests already active, even if their number exceeds the limit just imposed.
.1.3.6.1.2.1.80.1.2,DISMAN-PING-MIB::pingCtlTable,,not-accessible,,current,,Defines the ping Control Table for providing, via SNMP, the capability of performing ping operations at a remote host. The results of these operations are stored in the pingResultsTable and the pingProbeHistoryTable.
.1.3.6.1.2.1.80.1.2.1,DISMAN-PING-MIB::pingCtlEntry,,not-accessible,pingCtlOwnerIndex:pingCtlTestName,current,,Defines an entry in the pingCtlTable. The first index element, pingCtlOwnerIndex, is of type SnmpAdminString, a textual convention that allows for use of the SNMPv3 View-Based Access Control Model (RFC 3415, VACM) and that allows a management application to identify its entries. The second index, pingCtlTestName (also an SnmpAdminString), enables the same management application to have multiple outstanding requests.
.1.3.6.1.2.1.80.1.2.1.1,DISMAN-PING-MIB::pingCtlOwnerIndex,OCTET,not-accessible,,current,,To facilitate the provisioning of access control by a security administrator using the View-Based Access Control Model (RFC 2575, VACM) for tables in which multiple users may need to create or modify entries independently, the initial index is used as an 'owner index'. Such an initial index has a syntax of SnmpAdminString and can thus be trivially mapped to a securityName or groupName defined in VACM, in accordance with a security policy. When used in conjunction with such a security policy, all entries in the table belonging to a particular user (or group) will have the same value for this initial index. For a given user's entries in a particular table, the object identifiers for the information in these entries will have the same subidentifiers (except for the 'column' subidentifier) up to the end of the encoded owner index. To configure VACM to permit access to this portion of the table, one would create vacmViewTreeFamilyTable entries with the value of vacmViewTreeFamilySubtree including the owner index portion, and vacmViewTreeFamilyMask 'wildcarding' the column subidentifier. More elaborate configurations are possible.
.1.3.6.1.2.1.80.1.2.1.2,DISMAN-PING-MIB::pingCtlTestName,OCTET,not-accessible,,current,,The name of the ping test. This is locally unique, within the scope of a pingCtlOwnerIndex.
.1.3.6.1.2.1.80.1.2.1.3,DISMAN-PING-MIB::pingCtlTargetAddressType,INTEGER,read-create,,current,unknown(0):ipv4(1):ipv6(2):ipv4z(3):ipv6z(4):dns(16),Specifies the type of host address to be used at a remote host for performing a ping operation.
.1.3.6.1.2.1.80.1.2.1.4,DISMAN-PING-MIB::pingCtlTargetAddress,OCTET,read-create,,current,,Specifies the host address to be used at a remote host for performing a ping operation. The host address type is determined by the value of the corresponding pingCtlTargetAddressType. A value for this object MUST be set prior to transitioning its corresponding pingCtlEntry to active(1) via pingCtlRowStatus.
.1.3.6.1.2.1.80.1.2.1.5,DISMAN-PING-MIB::pingCtlDataSize,Unsigned32,read-create,,current,,Specifies the size of the data portion to be transmitted in a ping operation, in octets. Whether this value can be applied depends on the selected implementation method for performing a ping operation, indicated by pingCtlType in the same conceptual row. If the method used allows applying the value contained in this object, then it MUST be applied. If the specified size is not appropriate for the chosen ping method, the implementation SHOULD use whatever size (appropriate to the method) is closest to the specified size. The maximum value for this object was computed by subtracting the smallest possible IP header size of 20 octets (IPv4 header with no options) and the UDP header size of 8 octets from the maximum IP packet size. An IP packet has a maximum size of 65535 octets (excluding IPv6 Jumbograms).
.1.3.6.1.2.1.80.1.2.1.6,DISMAN-PING-MIB::pingCtlTimeOut,Unsigned32,read-create,,current,,Specifies the time-out value, in seconds, for a remote ping operation.
.1.3.6.1.2.1.80.1.2.1.7,DISMAN-PING-MIB::pingCtlProbeCount,Unsigned32,read-create,,current,,Specifies the number of times to perform a ping operation at a remote host as part of a single ping test.
.1.3.6.1.2.1.80.1.2.1.8,DISMAN-PING-MIB::pingCtlAdminStatus,INTEGER,read-create,,current,enabled(1):disabled(2),Reflects the desired state that a pingCtlEntry should be in: enabled(1) - Attempt to activate the test as defined by this pingCtlEntry. disabled(2) - Deactivate the test as defined by this pingCtlEntry. Refer to the corresponding pingResultsOperStatus to determine the operational state of the test defined by this entry.
.1.3.6.1.2.1.80.1.2.1.9,DISMAN-PING-MIB::pingCtlDataFill,OCTET,read-create,,current,,The content of this object is used together with the corresponding pingCtlDataSize value to determine how to fill the data portion of a probe packet. The option of selecting a data fill pattern can be useful when links are compressed or have data pattern sensitivities. The contents of pingCtlDataFill should be repeated in a ping packet when the size of the data portion of the ping packet is greater than the size of pingCtlDataFill.
.1.3.6.1.2.1.80.1.2.1.10,DISMAN-PING-MIB::pingCtlFrequency,Unsigned32,read-create,,current,,The number of seconds to wait before repeating a ping test as defined by the value of the various objects in the corresponding row. A single ping test consists of a series of ping probes. The number of probes is determined by the value of the corresponding pingCtlProbeCount object. After a single test is completed the number of seconds as defined by the value of pingCtlFrequency MUST elapse before the next ping test is started. A value of 0 for this object implies that the test as defined by the corresponding entry will not be repeated.
.1.3.6.1.2.1.80.1.2.1.11,DISMAN-PING-MIB::pingCtlMaxRows,Unsigned32,read-create,,current,,The maximum number of corresponding entries allowed in the pingProbeHistoryTable. An implementation of this MIB will remove the oldest corresponding entry in the pingProbeHistoryTable to allow the addition of an new entry once the number of corresponding rows in the pingProbeHistoryTable reaches this value. Old entries are not removed when a new test is started. Entries are added to the pingProbeHistoryTable until pingCtlMaxRows is reached before entries begin to be removed. A value of 0 for this object disables creation of pingProbeHistoryTable entries.
.1.3.6.1.2.1.80.1.2.1.12,DISMAN-PING-MIB::pingCtlStorageType,INTEGER,read-create,,current,other(1):volatile(2):nonVolatile(3):permanent(4):readOnly(5),The storage type for this conceptual row. Conceptual rows having the value 'permanent' need not allow write-access to any columnar objects in the row.
.1.3.6.1.2.1.80.1.2.1.13,DISMAN-PING-MIB::pingCtlTrapGeneration,BITS,read-create,,current,probeFailure(0):testFailure(1):testCompletion(2),The value of this object determines when and whether to generate a notification for this entry: probeFailure(0) - Generate a pingProbeFailed notification subject to the value of pingCtlTrapProbeFailureFilter. The object pingCtlTrapProbeFailureFilter can be used to specify the number of consecutive probe failures that are required before a pingProbeFailed notification can be generated. testFailure(1) - Generate a pingTestFailed notification. In this instance the object pingCtlTrapTestFailureFilter can be used to determine the number of probe failures that signal when a test fails. testCompletion(2) - Generate a pingTestCompleted notification. By default, no bits are set, indicating that none of the above options is selected.
.1.3.6.1.2.1.80.1.2.1.14,DISMAN-PING-MIB::pingCtlTrapProbeFailureFilter,Unsigned32,read-create,,current,,The value of this object is used to determine when to generate a pingProbeFailed NOTIFICATION. Setting BIT probeFailure(0) of object pingCtlTrapGeneration to '1' implies that a pingProbeFailed NOTIFICATION is generated only when a number of consecutive ping probes equal to the value of pingCtlTrapProbeFailureFilter fail within a given ping test. After triggering the notification, the probe failure counter is reset to zero.
.1.3.6.1.2.1.80.1.2.1.15,DISMAN-PING-MIB::pingCtlTrapTestFailureFilter,Unsigned32,read-create,,current,,The value of this object is used to determine when to generate a pingTestFailed NOTIFICATION. Setting BIT testFailure(1) of object pingCtlTrapGeneration to '1' implies that a pingTestFailed NOTIFICATION is generated only when a number of consecutive ping tests equal to the value of pingCtlTrapProbeFailureFilter fail. After triggering the notification, the test failure counter is reset to zero.
.1.3.6.1.2.1.80.1.2.1.16,DISMAN-PING-MIB::pingCtlType,OBJECT,read-create,,current,,The value of this object is used either to report or to select the implementation method to be used for calculating a ping response time. The value of this object MAY be selected from pingImplementationTypeDomains. Additional implementation types SHOULD be allocated as required by implementers of the DISMAN-PING-MIB under their enterprise-specific registration point and not beneath pingImplementationTypeDomains.
.1.3.6.1.2.1.80.1.2.1.17,DISMAN-PING-MIB::pingCtlDescr,OCTET,read-create,,current,,The purpose of this object is to provide a descriptive name of the remote ping test.
.1.3.6.1.2.1.80.1.2.1.18,DISMAN-PING-MIB::pingCtlSourceAddressType,INTEGER,read-create,,current,unknown(0):ipv4(1):ipv6(2):ipv4z(3):ipv6z(4):dns(16),Specifies the type of the source address, pingCtlSourceAddress, to be used at a remote host when a ping operation is performed.
.1.3.6.1.2.1.80.1.2.1.19,DISMAN-PING-MIB::pingCtlSourceAddress,OCTET,read-create,,current,,Use the specified IP address (which must be given in numeric form, not as a hostname) as the source address in outgoing probe packets. On hosts with more than one IP address, this option can be used to select the address to be used. If the IP address is not one of this machine's interface addresses, an error is returned and nothing is sent. A zero-length octet string value for this object disables source address specification. The address type (InetAddressType) that relates to this object is specified by the corresponding value of pingCtlSourceAddressType.
.1.3.6.1.2.1.80.1.2.1.20,DISMAN-PING-MIB::pingCtlIfIndex,Integer32,read-create,,current,,Setting this object to an interface's ifIndex prior to starting a remote ping operation directs the ping probes to be transmitted over the specified interface. A value of zero for this object means that this option is not enabled.
.1.3.6.1.2.1.80.1.2.1.21,DISMAN-PING-MIB::pingCtlByPassRouteTable,INTEGER,read-create,,current,true(1):false(2),The purpose of this object is to enable optional bypassing the route table. If enabled, the remote host will bypass the normal routing tables and send directly to a host on an attached network. If the host is not on a directly attached network, an error is returned. This option can be used to perform the ping operation to a local host through an interface that has no route defined (e.g., after the interface was dropped by the routing daemon at the host).
.1.3.6.1.2.1.80.1.2.1.22,DISMAN-PING-MIB::pingCtlDSField,Unsigned32,read-create,,current,,Specifies the value to store in the Type of Service (TOS) octet in the IPv4 header or in the Traffic Class octet in the IPv6 header, respectively, of the IP packet used to encapsulate the ping probe. The octet to be set in the IP header contains the Differentiated Services (DS) Field in the six most significant bits. This option can be used to determine what effect an explicit DS Field setting has on a ping response. Not all values are legal or meaningful. A value of 0 means that the function represented by this option is not supported. DS Field usage is often not supported by IP implementations, and not all values are supported. Refer to RFC 2474 and RFC 3260 for guidance on usage of this field.
.1.3.6.1.2.1.80.1.2.1.23,DISMAN-PING-MIB::pingCtlRowStatus,INTEGER,read-create,,current,active(1):notInService(2):notReady(3):createAndGo(4):createAndWait(5):destroy(6),This object allows entries to be created and deleted in the pingCtlTable. Deletion of an entry in this table results in the deletion of all corresponding (same pingCtlOwnerIndex and pingCtlTestName index values) pingResultsTable and pingProbeHistoryTable entries. A value MUST be specified for pingCtlTargetAddress prior to acceptance of a transition to active(1) state. When a value for pingCtlTargetAddress is set, the value of object pingCtlRowStatus changes from notReady(3) to notInService(2). Activation of a remote ping operation is controlled via pingCtlAdminStatus, not by changing this object's value to active(1). Transitions in and out of active(1) state are not allowed while an entry's pingResultsOperStatus is active(1), with the exception that deletion of an entry in this table by setting its RowStatus object to destroy(6) will stop an active ping operation. The operational state of a ping operation can be determined by examination of its pingResultsOperStatus object.
.1.3.6.1.2.1.80.1.3,DISMAN-PING-MIB::pingResultsTable,,not-accessible,,current,,Defines the Ping Results Table for providing the capability of performing ping operations at a remote host. The results of these operations are stored in the pingResultsTable and the pingProbeHistoryTable. An entry is added to the pingResultsTable when an pingCtlEntry is started by successful transition of its pingCtlAdminStatus object to enabled(1). If the object pingCtlAdminStatus already has the value enabled(1), and if the corresponding pingResultsOperStatus object has the value completed(3), then successfully writing enabled(1) to object pingCtlAdminStatus re-initializes the already existing entry in the pingResultsTable. The values of objects in the re-initialized entry are the same as the values of objects in a new entry would be. An entry is removed from the pingResultsTable when its corresponding pingCtlEntry is deleted.
.1.3.6.1.2.1.80.1.3.1,DISMAN-PING-MIB::pingResultsEntry,,not-accessible,pingCtlOwnerIndex:pingCtlTestName,current,,Defines an entry in the pingResultsTable. The pingResultsTable has the same indexing as the pingCtlTable so that a pingResultsEntry corresponds to the pingCtlEntry that caused it to be created.
.1.3.6.1.2.1.80.1.3.1.1,DISMAN-PING-MIB::pingResultsOperStatus,INTEGER,read-only,,current,enabled(1):disabled(2):completed(3),Reflects the operational state of a pingCtlEntry: enabled(1) - Test is active. disabled(2) - Test has stopped. completed(3) - Test is completed.
.1.3.6.1.2.1.80.1.3.1.2,DISMAN-PING-MIB::pingResultsIpTargetAddressType,INTEGER,read-only,,current,unknown(0):ipv4(1):ipv6(2):ipv4z(3):ipv6z(4):dns(16),This object indicates the type of address stored in the corresponding pingResultsIpTargetAddress object.
.1.3.6.1.2.1.80.1.3.1.3,DISMAN-PING-MIB::pingResultsIpTargetAddress,OCTET,read-only,,current,,This object reports the IP address associated with a pingCtlTargetAddress value when the destination address is specified as a DNS name. The value of this object should be a zero-length octet string when a DNS name is not specified or when a specified DNS name fails to resolve. The address type (InetAddressType) that relates to this object is specified by the corresponding value of pingResultsIpTargetAddressType.
.1.3.6.1.2.1.80.1.3.1.4,DISMAN-PING-MIB::pingResultsMinRtt,Unsigned32,read-only,,current,,The minimum ping round-trip-time (RTT) received. A value of 0 for this object implies that no RTT has been received.
.1.3.6.1.2.1.80.1.3.1.5,DISMAN-PING-MIB::pingResultsMaxRtt,Unsigned32,read-only,,current,,The maximum ping round-trip-time (RTT) received. A value of 0 for this object implies that no RTT has been received.
.1.3.6.1.2.1.80.1.3.1.6,DISMAN-PING-MIB::pingResultsAverageRtt,Unsigned32,read-only,,current,,The current average ping round-trip-time (RTT).
.1.3.6.1.2.1.80.1.3.1.7,DISMAN-PING-MIB::pingResultsProbeResponses,Gauge32,read-only,,current,,Number of responses received for the corresponding pingCtlEntry and pingResultsEntry. The value of this object MUST be reported as 0 when no probe responses have been received.
.1.3.6.1.2.1.80.1.3.1.8,DISMAN-PING-MIB::pingResultsSentProbes,Gauge32,read-only,,current,,The value of this object reflects the number of probes sent for the corresponding pingCtlEntry and pingResultsEntry. The value of this object MUST be reported as 0 when no probes have been sent.
.1.3.6.1.2.1.80.1.3.1.9,DISMAN-PING-MIB::pingResultsRttSumOfSquares,Unsigned32,read-only,,current,,This object contains the sum of the squares for all ping responses received. Its purpose is to enable standard deviation calculation. The value of this object MUST be reported as 0 when no ping responses have been received.
.1.3.6.1.2.1.80.1.3.1.10,DISMAN-PING-MIB::pingResultsLastGoodProbe,OCTET,read-only,,current,,Date and time when the last response was received for a probe.
.1.3.6.1.2.1.80.1.4,DISMAN-PING-MIB::pingProbeHistoryTable,,not-accessible,,current,,Defines a table for storing the results of ping operations. The number of entries in this table is limited per entry in the pingCtlTable by the value of the corresponding pingCtlMaxRows object. An entry in this table is created when the result of a ping probe is determined. The initial 2 instance identifier index values identify the pingCtlEntry that a probe result (pingProbeHistoryEntry) belongs to. An entry is removed from this table when its corresponding pingCtlEntry is deleted. An implementation of this MIB will remove the oldest entry in the pingProbeHistoryTable of the corresponding entry in the pingCtlTable to allow the addition of an new entry once the number of rows in the pingProbeHistoryTable reaches the value specified by pingCtlMaxRows for the corresponding entry in the pingCtlTable.
.1.3.6.1.2.1.80.1.4.1,DISMAN-PING-MIB::pingProbeHistoryEntry,,not-accessible,pingCtlOwnerIndex:pingCtlTestName:pingProbeHistoryIndex,current,,Defines an entry in the pingProbeHistoryTable. The first two index elements identify the pingCtlEntry that a pingProbeHistoryEntry belongs to. The third index element selects a single probe result.
.1.3.6.1.2.1.80.1.4.1.1,DISMAN-PING-MIB::pingProbeHistoryIndex,Unsigned32,not-accessible,,current,,An entry in this table is created when the result of a ping probe is determined. The initial 2 instance identifier index values identify the pingCtlEntry that a probe result (pingProbeHistoryEntry) belongs to. An implementation MUST start assigning pingProbeHistoryIndex values at 1 and wrap after exceeding the maximum possible value as defined by the limit of this object ('ffffffff'h).
.1.3.6.1.2.1.80.1.4.1.2,DISMAN-PING-MIB::pingProbeHistoryResponse,Unsigned32,read-only,,current,,The amount of time measured in milliseconds from when a probe was sent to when its response was received or when it timed out. The value of this object is reported as 0 when it is not possible to transmit a probe.
.1.3.6.1.2.1.80.1.4.1.3,DISMAN-PING-MIB::pingProbeHistoryStatus,INTEGER,read-only,,current,responseReceived(1):unknown(2):internalError(3):requestTimedOut(4):unknownDestinationAddress(5):noRouteToTarget(6):interfaceInactiveToTarget(7):arpFailure(8):maxConcurrentLimitReached(9):unableToResolveDnsName(10):invalidHostAddress(11),The result of a particular probe done by a remote host.
.1.3.6.1.2.1.80.1.4.1.4,DISMAN-PING-MIB::pingProbeHistoryLastRC,Integer32,read-only,,current,,The last implementation-method-specific reply code received. If the ICMP Echo capability is being used, then a successful probe ends when an ICMP response is received that contains the code ICMP_ECHOREPLY(0). The ICMP codes are maintained by IANA. Standardized ICMP codes are listed at http://www.iana.org/assignments/icmp-parameters. The ICMPv6 codes are listed at http://www.iana.org/assignments/icmpv6-parameters.
.1.3.6.1.2.1.80.1.4.1.5,DISMAN-PING-MIB::pingProbeHistoryTime,OCTET,read-only,,current,,Timestamp for when this probe result was determined.
.1.3.6.1.2.1.80.2,DISMAN-PING-MIB::pingConformance,,,,,,
.1.3.6.1.2.1.80.2.1,DISMAN-PING-MIB::pingCompliances,,,,,,
.1.3.6.1.2.1.80.2.1.1,DISMAN-PING-MIB::pingCompliance,,,,,,The compliance statement for the DISMAN-PING-MIB. This compliance statement has been deprecated because the group pingGroup and the pingTimeStampGroup have been split and deprecated. The pingFullCompliance statement is semantically identical to the deprecated pingCompliance statement.
.1.3.6.1.2.1.80.2.1.2,DISMAN-PING-MIB::pingFullCompliance,,,,,,The compliance statement for SNMP entities that fully implement the DISMAN-PING-MIB.
.1.3.6.1.2.1.80.2.1.3,DISMAN-PING-MIB::pingMinimumCompliance,,,,,,The minimum compliance statement for SNMP entities that implement the minimal subset of the DISMAN-PING-MIB. Implementors might choose this subset for small devices with limited resources.
.1.3.6.1.2.1.80.2.2,DISMAN-PING-MIB::pingGroups,,,,,,
.1.3.6.1.2.1.80.2.2.1,DISMAN-PING-MIB::pingGroup,,,,,,The group of objects that constitute the remote ping capability.
.1.3.6.1.2.1.80.2.2.2,DISMAN-PING-MIB::pingTimeStampGroup,,,,,,The group of DateAndTime objects.
.1.3.6.1.2.1.80.2.2.3,DISMAN-PING-MIB::pingNotificationsGroup,,,,,,The notification that are required to be supported by implementations of this MIB.
.1.3.6.1.2.1.80.2.2.4,DISMAN-PING-MIB::pingMinimumGroup,,,,,,The group of objects that constitute the remote ping capability.
.1.3.6.1.2.1.80.2.2.5,DISMAN-PING-MIB::pingCtlRowStatusGroup,,,,,,The RowStatus object of the pingCtlTable.
.1.3.6.1.2.1.80.2.2.6,DISMAN-PING-MIB::pingHistoryGroup,,,,,,The group of objects that constitute the history capability.
.1.3.6.1.2.1.80.3,DISMAN-PING-MIB::pingImplementationTypeDomains,,,,,,
.1.3.6.1.2.1.80.3.1,DISMAN-PING-MIB::pingIcmpEcho,,,,,,Indicates that an implementation is using the Internet Control Message Protocol (ICMP) 'ECHO' facility.
.1.3.6.1.2.1.80.3.2,DISMAN-PING-MIB::pingUdpEcho,,,,,,Indicates that an implementation is using the UDP echo port (7).
.1.3.6.1.2.1.80.3.3,DISMAN-PING-MIB::pingSnmpQuery,,,,,,Indicates that an implementation is using an SNMP query to calculate a round trip time.
.1.3.6.1.2.1.80.3.4,DISMAN-PING-MIB::pingTcpConnectionAttempt,,,,,,Indicates that an implementation is attempting to connect to a TCP port in order to calculate a round trip time.
.1.3.6.1.2.1.83,IPMROUTE-STD-MIB::ipMRouteStdMIB,,,,,,The MIB module for management of IP Multicast routing, but independent of the specific multicast routing protocol in use.
.1.3.6.1.2.1.83.1,IPMROUTE-STD-MIB::ipMRouteMIBObjects,,,,,,
.1.3.6.1.2.1.83.1.1,IPMROUTE-STD-MIB::ipMRoute,,,,,,
.1.3.6.1.2.1.83.1.1.1,IPMROUTE-STD-MIB::ipMRouteEnable,INTEGER,read-write,,current,enabled(1):disabled(2),The enabled status of IP Multicast routing on this router.
.1.3.6.1.2.1.83.1.1.2,IPMROUTE-STD-MIB::ipMRouteTable,,not-accessible,,current,,The (conceptual) table containing multicast routing information for IP datagrams sent by particular sources to the IP multicast groups known to this router.
.1.3.6.1.2.1.83.1.1.2.1,IPMROUTE-STD-MIB::ipMRouteEntry,,not-accessible,ipMRouteGroup:ipMRouteSource:ipMRouteSourceMask,current,,An entry (conceptual row) containing the multicast routing information for IP datagrams from a particular source and addressed to a particular IP multicast group address. Discontinuities in counters in this entry can be detected by observing the value of ipMRouteUpTime.
.1.3.6.1.2.1.83.1.1.2.1.1,IPMROUTE-STD-MIB::ipMRouteGroup,IpAddress,not-accessible,,current,,The IP multicast group address for which this entry contains multicast routing information.
.1.3.6.1.2.1.83.1.1.2.1.2,IPMROUTE-STD-MIB::ipMRouteSource,IpAddress,not-accessible,,current,,The network address which when combined with the corresponding value of ipMRouteSourceMask identifies the sources for which this entry contains multicast routing information.
.1.3.6.1.2.1.83.1.1.2.1.3,IPMROUTE-STD-MIB::ipMRouteSourceMask,IpAddress,not-accessible,,current,,The network mask which when combined with the corresponding value of ipMRouteSource identifies the sources for which this entry contains multicast routing information.
.1.3.6.1.2.1.83.1.1.2.1.4,IPMROUTE-STD-MIB::ipMRouteUpstreamNeighbor,IpAddress,read-only,,current,,The address of the upstream neighbor (e.g., RPF neighbor) from which IP datagrams from these sources to this multicast address are received, or 0.0.0.0 if the upstream neighbor is unknown (e.g., in CBT).
.1.3.6.1.2.1.83.1.1.2.1.5,IPMROUTE-STD-MIB::ipMRouteInIfIndex,Integer32,read-only,,current,,The value of ifIndex for the interface on which IP datagrams sent by these sources to this multicast address are received. A value of 0 indicates that datagrams are not subject to an incoming interface check, but may be accepted on multiple interfaces (e.g., in CBT).
.1.3.6.1.2.1.83.1.1.2.1.6,IPMROUTE-STD-MIB::ipMRouteUpTime,TimeTicks,read-only,,current,,The time since the multicast routing information represented by this entry was learned by the router.
.1.3.6.1.2.1.83.1.1.2.1.7,IPMROUTE-STD-MIB::ipMRouteExpiryTime,TimeTicks,read-only,,current,,The minimum amount of time remaining before this entry will be aged out. The value 0 indicates that the entry is not subject to aging.
.1.3.6.1.2.1.83.1.1.2.1.8,IPMROUTE-STD-MIB::ipMRoutePkts,Counter32,read-only,,current,,The number of packets which this router has received from these sources and addressed to this multicast group address.
.1.3.6.1.2.1.83.1.1.2.1.9,IPMROUTE-STD-MIB::ipMRouteDifferentInIfPackets,Counter32,read-only,,current,,The number of packets which this router has received from these sources and addressed to this multicast group address, which were dropped because they were not received on the interface indicated by ipMRouteInIfIndex. Packets which are not subject to an incoming interface check (e.g., using CBT) are not counted.
.1.3.6.1.2.1.83.1.1.2.1.10,IPMROUTE-STD-MIB::ipMRouteOctets,Counter32,read-only,,current,,The number of octets contained in IP datagrams which were received from these sources and addressed to this multicast group address, and which were forwarded by this router.
.1.3.6.1.2.1.83.1.1.2.1.11,IPMROUTE-STD-MIB::ipMRouteProtocol,INTEGER,read-only,,current,other(1):local(2):netmgmt(3):dvmrp(4):mospf(5):pimSparseDense(6):cbt(7):pimSparseMode(8):pimDenseMode(9):igmpOnly(10):bgmp(11):msdp(12),The multicast routing protocol via which this multicast forwarding entry was learned.
.1.3.6.1.2.1.83.1.1.2.1.12,IPMROUTE-STD-MIB::ipMRouteRtProto,INTEGER,read-only,,current,other(1):local(2):netmgmt(3):icmp(4):egp(5):ggp(6):hello(7):rip(8):isIs(9):esIs(10):ciscoIgrp(11):bbnSpfIgp(12):ospf(13):bgp(14):idpr(15):ciscoEigrp(16):dvmrp(17):rpl(18):dhcp(19):ttdp(20),The routing mechanism via which the route used to find the upstream or parent interface for this multicast forwarding entry was learned. Inclusion of values for routing protocols is not intended to imply that those protocols need be supported.
.1.3.6.1.2.1.83.1.1.2.1.13,IPMROUTE-STD-MIB::ipMRouteRtAddress,IpAddress,read-only,,current,,The address portion of the route used to find the upstream or parent interface for this multicast forwarding entry.
.1.3.6.1.2.1.83.1.1.2.1.14,IPMROUTE-STD-MIB::ipMRouteRtMask,IpAddress,read-only,,current,,The mask associated with the route used to find the upstream or parent interface for this multicast forwarding entry.
.1.3.6.1.2.1.83.1.1.2.1.15,IPMROUTE-STD-MIB::ipMRouteRtType,INTEGER,read-only,,current,unicast(1):multicast(2),The reason the given route was placed in the (logical) multicast Routing Information Base (RIB). A value of unicast means that the route would normally be placed only in the unicast RIB, but was placed in the multicast RIB (instead or in addition) due to local configuration, such as when running PIM over RIP. A value of multicast means that the route was explicitly added to the multicast RIB by the routing protocol, such as DVMRP or Multiprotocol BGP.
.1.3.6.1.2.1.83.1.1.2.1.16,IPMROUTE-STD-MIB::ipMRouteHCOctets,Counter64,read-only,,current,,The number of octets contained in IP datagrams which were received from these sources and addressed to this multicast group address, and which were forwarded by this router. This object is a 64-bit version of ipMRouteOctets.
.1.3.6.1.2.1.83.1.1.3,IPMROUTE-STD-MIB::ipMRouteNextHopTable,,not-accessible,,current,,The (conceptual) table containing information on the next- hops on outgoing interfaces for routing IP multicast datagrams. Each entry is one of a list of next-hops on outgoing interfaces for particular sources sending to a particular multicast group address.
.1.3.6.1.2.1.83.1.1.3.1,IPMROUTE-STD-MIB::ipMRouteNextHopEntry,,not-accessible,ipMRouteNextHopGroup:ipMRouteNextHopSource:ipMRouteNextHopSourceMask:ipMRouteNextHopIfIndex:ipMRouteNextHopAddress,current,,An entry (conceptual row) in the list of next-hops on outgoing interfaces to which IP multicast datagrams from particular sources to a IP multicast group address are routed. Discontinuities in counters in this entry can be detected by observing the value of ipMRouteUpTime.
.1.3.6.1.2.1.83.1.1.3.1.1,IPMROUTE-STD-MIB::ipMRouteNextHopGroup,IpAddress,not-accessible,,current,,The IP multicast group for which this entry specifies a next-hop on an outgoing interface.
.1.3.6.1.2.1.83.1.1.3.1.2,IPMROUTE-STD-MIB::ipMRouteNextHopSource,IpAddress,not-accessible,,current,,The network address which when combined with the corresponding value of ipMRouteNextHopSourceMask identifies the sources for which this entry specifies a next-hop on an outgoing interface.
.1.3.6.1.2.1.83.1.1.3.1.3,IPMROUTE-STD-MIB::ipMRouteNextHopSourceMask,IpAddress,not-accessible,,current,,The network mask which when combined with the corresponding value of ipMRouteNextHopSource identifies the sources for which this entry specifies a next-hop on an outgoing interface.
.1.3.6.1.2.1.83.1.1.3.1.4,IPMROUTE-STD-MIB::ipMRouteNextHopIfIndex,Integer32,not-accessible,,current,,The ifIndex value of the interface for the outgoing interface for this next-hop.
.1.3.6.1.2.1.83.1.1.3.1.5,IPMROUTE-STD-MIB::ipMRouteNextHopAddress,IpAddress,not-accessible,,current,,The address of the next-hop specific to this entry. For most interfaces, this is identical to ipMRouteNextHopGroup. NBMA interfaces, however, may have multiple next-hop addresses out a single outgoing interface.
.1.3.6.1.2.1.83.1.1.3.1.6,IPMROUTE-STD-MIB::ipMRouteNextHopState,INTEGER,read-only,,current,pruned(1):forwarding(2),An indication of whether the outgoing interface and next- hop represented by this entry is currently being used to forward IP datagrams. The value 'forwarding' indicates it is currently being used; the value 'pruned' indicates it is not.
.1.3.6.1.2.1.83.1.1.3.1.7,IPMROUTE-STD-MIB::ipMRouteNextHopUpTime,TimeTicks,read-only,,current,,The time since the multicast routing information represented by this entry was learned by the router.
.1.3.6.1.2.1.83.1.1.3.1.8,IPMROUTE-STD-MIB::ipMRouteNextHopExpiryTime,TimeTicks,read-only,,current,,The minimum amount of time remaining before this entry will be aged out. If ipMRouteNextHopState is pruned(1), the remaining time until the prune expires and the state reverts to forwarding(2). Otherwise, the remaining time until this entry is removed from the table. The time remaining may be copied from ipMRouteExpiryTime if the protocol in use for this entry does not specify next-hop timers. The value 0 indicates that the entry is not subject to aging.
.1.3.6.1.2.1.83.1.1.3.1.9,IPMROUTE-STD-MIB::ipMRouteNextHopClosestMemberHops,Integer32,read-only,,current,,The minimum number of hops between this router and any member of this IP multicast group reached via this next-hop on this outgoing interface. Any IP multicast datagrams for the group which have a TTL less than this number of hops will not be forwarded to this next-hop.
.1.3.6.1.2.1.83.1.1.3.1.10,IPMROUTE-STD-MIB::ipMRouteNextHopProtocol,INTEGER,read-only,,current,other(1):local(2):netmgmt(3):dvmrp(4):mospf(5):pimSparseDense(6):cbt(7):pimSparseMode(8):pimDenseMode(9):igmpOnly(10):bgmp(11):msdp(12),The routing mechanism via which this next-hop was learned.
.1.3.6.1.2.1.83.1.1.3.1.11,IPMROUTE-STD-MIB::ipMRouteNextHopPkts,Counter32,read-only,,current,,The number of packets which have been forwarded using this route.
.1.3.6.1.2.1.83.1.1.4,IPMROUTE-STD-MIB::ipMRouteInterfaceTable,,not-accessible,,current,,The (conceptual) table containing multicast routing information specific to interfaces.
.1.3.6.1.2.1.83.1.1.4.1,IPMROUTE-STD-MIB::ipMRouteInterfaceEntry,,not-accessible,ipMRouteInterfaceIfIndex,current,,An entry (conceptual row) containing the multicast routing information for a particular interface.
.1.3.6.1.2.1.83.1.1.4.1.1,IPMROUTE-STD-MIB::ipMRouteInterfaceIfIndex,Integer32,not-accessible,,current,,The ifIndex value of the interface for which this entry contains information.
.1.3.6.1.2.1.83.1.1.4.1.2,IPMROUTE-STD-MIB::ipMRouteInterfaceTtl,Integer32,read-write,,current,,The datagram TTL threshold for the interface. Any IP multicast datagrams with a TTL less than this threshold will not be forwarded out the interface. The default value of 0 means all multicast packets are forwarded out the interface.
.1.3.6.1.2.1.83.1.1.4.1.3,IPMROUTE-STD-MIB::ipMRouteInterfaceProtocol,INTEGER,read-only,,current,other(1):local(2):netmgmt(3):dvmrp(4):mospf(5):pimSparseDense(6):cbt(7):pimSparseMode(8):pimDenseMode(9):igmpOnly(10):bgmp(11):msdp(12),The routing protocol running on this interface.
.1.3.6.1.2.1.83.1.1.4.1.4,IPMROUTE-STD-MIB::ipMRouteInterfaceRateLimit,Integer32,read-write,,current,,The rate-limit, in kilobits per second, of forwarded multicast traffic on the interface. A rate-limit of 0 indicates that no rate limiting is done.
.1.3.6.1.2.1.83.1.1.4.1.5,IPMROUTE-STD-MIB::ipMRouteInterfaceInMcastOctets,Counter32,read-only,,current,,The number of octets of multicast packets that have arrived on the interface, including framing characters. This object is similar to ifInOctets in the Interfaces MIB, except that only multicast packets are counted.
.1.3.6.1.2.1.83.1.1.4.1.6,IPMROUTE-STD-MIB::ipMRouteInterfaceOutMcastOctets,Counter32,read-only,,current,,The number of octets of multicast packets that have been sent on the interface.
.1.3.6.1.2.1.83.1.1.4.1.7,IPMROUTE-STD-MIB::ipMRouteInterfaceHCInMcastOctets,Counter64,read-only,,current,,The number of octets of multicast packets that have arrived on the interface, including framing characters. This object is a 64-bit version of ipMRouteInterfaceInMcastOctets. It is similar to ifHCInOctets in the Interfaces MIB, except that only multicast packets are counted.
.1.3.6.1.2.1.83.1.1.4.1.8,IPMROUTE-STD-MIB::ipMRouteInterfaceHCOutMcastOctets,Counter64,read-only,,current,,The number of octets of multicast packets that have been sent on the interface. This object is a 64-bit version of ipMRouteInterfaceOutMcastOctets.
.1.3.6.1.2.1.83.1.1.5,IPMROUTE-STD-MIB::ipMRouteBoundaryTable,,not-accessible,,current,,The (conceptual) table listing the router's scoped multicast address boundaries.
.1.3.6.1.2.1.83.1.1.5.1,IPMROUTE-STD-MIB::ipMRouteBoundaryEntry,,not-accessible,ipMRouteBoundaryIfIndex:ipMRouteBoundaryAddress:ipMRouteBoundaryAddressMask,current,,An entry (conceptual row) in the ipMRouteBoundaryTable representing a scoped boundary.
.1.3.6.1.2.1.83.1.1.5.1.1,IPMROUTE-STD-MIB::ipMRouteBoundaryIfIndex,Integer32,not-accessible,,current,,The IfIndex value for the interface to which this boundary applies. Packets with a destination address in the associated address/mask range will not be forwarded out this interface.
.1.3.6.1.2.1.83.1.1.5.1.2,IPMROUTE-STD-MIB::ipMRouteBoundaryAddress,IpAddress,not-accessible,,current,,The group address which when combined with the corresponding value of ipMRouteBoundaryAddressMask identifies the group range for which the scoped boundary exists. Scoped addresses must come from the range 239.x.x.x as specified in RFC 2365.
.1.3.6.1.2.1.83.1.1.5.1.3,IPMROUTE-STD-MIB::ipMRouteBoundaryAddressMask,IpAddress,not-accessible,,current,,The group address mask which when combined with the corresponding value of ipMRouteBoundaryAddress identifies the group range for which the scoped boundary exists.
.1.3.6.1.2.1.83.1.1.5.1.4,IPMROUTE-STD-MIB::ipMRouteBoundaryStatus,INTEGER,read-create,,current,active(1):notInService(2):notReady(3):createAndGo(4):createAndWait(5):destroy(6),The status of this row, by which new entries may be created, or old entries deleted from this table.
.1.3.6.1.2.1.83.1.1.6,IPMROUTE-STD-MIB::ipMRouteScopeNameTable,,not-accessible,,current,,The (conceptual) table listing the multicast scope names.
.1.3.6.1.2.1.83.1.1.6.1,IPMROUTE-STD-MIB::ipMRouteScopeNameEntry,,not-accessible,ipMRouteScopeNameAddress:ipMRouteScopeNameAddressMask:IMPLIEDipMRouteScopeNameLanguage,current,,An entry (conceptual row) in the ipMRouteScopeNameTable representing a multicast scope name.
.1.3.6.1.2.1.83.1.1.6.1.1,IPMROUTE-STD-MIB::ipMRouteScopeNameAddress,IpAddress,not-accessible,,current,,The group address which when combined with the corresponding value of ipMRouteScopeNameAddressMask identifies the group range associated with the multicast scope. Scoped addresses must come from the range 239.x.x.x.
.1.3.6.1.2.1.83.1.1.6.1.2,IPMROUTE-STD-MIB::ipMRouteScopeNameAddressMask,IpAddress,not-accessible,,current,,The group address mask which when combined with the corresponding value of ipMRouteScopeNameAddress identifies the group range associated with the multicast scope.
.1.3.6.1.2.1.83.1.1.6.1.3,IPMROUTE-STD-MIB::ipMRouteScopeNameLanguage,OCTET,not-accessible,,current,,The RFC 1766-style language tag associated with the scope name.
.1.3.6.1.2.1.83.1.1.6.1.4,IPMROUTE-STD-MIB::ipMRouteScopeNameString,OCTET,read-create,,current,,The textual name associated with the multicast scope. The value of this object should be suitable for displaying to end-users, such as when allocating a multicast address in this scope. When no name is specified, the default value of this object should be the string 239.x.x.x/y with x and y replaced appropriately to describe the address and mask length associated with the scope.
.1.3.6.1.2.1.83.1.1.6.1.5,IPMROUTE-STD-MIB::ipMRouteScopeNameDefault,INTEGER,read-create,,current,true(1):false(2),If true, indicates a preference that the name in the following language should be used by applications if no name is available in a desired language.
.1.3.6.1.2.1.83.1.1.6.1.6,IPMROUTE-STD-MIB::ipMRouteScopeNameStatus,INTEGER,read-create,,current,active(1):notInService(2):notReady(3):createAndGo(4):createAndWait(5):destroy(6),The status of this row, by which new entries may be created, or old entries deleted from this table.
.1.3.6.1.2.1.83.1.1.7,IPMROUTE-STD-MIB::ipMRouteEntryCount,Gauge32,read-only,,current,,The number of rows in the ipMRouteTable. This can be used to monitor the multicast routing table size.
.1.3.6.1.2.1.83.2,IPMROUTE-STD-MIB::ipMRouteMIBConformance,,,,,,
.1.3.6.1.2.1.83.2.1,IPMROUTE-STD-MIB::ipMRouteMIBCompliances,,,,,,
.1.3.6.1.2.1.83.2.1.1,IPMROUTE-STD-MIB::ipMRouteMIBCompliance,,,,,,The compliance statement for the IP Multicast MIB.
.1.3.6.1.2.1.83.2.2,IPMROUTE-STD-MIB::ipMRouteMIBGroups,,,,,,
.1.3.6.1.2.1.83.2.2.1,IPMROUTE-STD-MIB::ipMRouteMIBBasicGroup,,,,,,A collection of objects to support basic management of IP Multicast routing.
.1.3.6.1.2.1.83.2.2.2,IPMROUTE-STD-MIB::ipMRouteMIBHopCountGroup,,,,,,A collection of objects to support management of the use of hop counts in IP Multicast routing.
.1.3.6.1.2.1.83.2.2.3,IPMROUTE-STD-MIB::ipMRouteMIBBoundaryGroup,,,,,,A collection of objects to support management of scoped multicast address boundaries.
.1.3.6.1.2.1.83.2.2.4,IPMROUTE-STD-MIB::ipMRouteMIBPktsOutGroup,,,,,,A collection of objects to support management of packet counters for each outgoing interface entry of a route.
.1.3.6.1.2.1.83.2.2.5,IPMROUTE-STD-MIB::ipMRouteMIBHCInterfaceGroup,,,,,,A collection of objects providing information specific to high speed (greater than 20,000,000 bits/second) network interfaces.
.1.3.6.1.2.1.83.2.2.6,IPMROUTE-STD-MIB::ipMRouteMIBRouteGroup,,,,,,A collection of objects providing information on the relationship between multicast routing information, and the IP Forwarding Table.
.1.3.6.1.2.1.83.2.2.7,IPMROUTE-STD-MIB::ipMRouteMIBPktsGroup,,,,,,A collection of objects to support management of packet counters for each forwarding entry.
.1.3.6.1.2.1.84,IANA-RTPROTO-MIB::ianaRtProtoMIB,,,,,,This MIB module defines the IANAipRouteProtocol and IANAipMRouteProtocol textual conventions for use in MIBs which need to identify unicast or multicast routing mechanisms. Any additions or changes to the contents of this MIB module require either publication of an RFC, or Designated Expert Review as defined in RFC 2434, Guidelines for Writing an IANA Considerations Section in RFCs. The Designated Expert will be selected by the IESG Area Director(s) of the Routing Area.
.1.3.6.1.2.1.91,IPV6-MLD-MIB::mldMIB,,,,,,The MIB module for MLD Management.
.1.3.6.1.2.1.91.1,IPV6-MLD-MIB::mldMIBObjects,,,,,,
.1.3.6.1.2.1.91.1.1,IPV6-MLD-MIB::mldInterfaceTable,,not-accessible,,current,,The (conceptual) table listing the interfaces on which MLD is enabled.
.1.3.6.1.2.1.91.1.1.1,IPV6-MLD-MIB::mldInterfaceEntry,,not-accessible,mldInterfaceIfIndex,current,,An entry (conceptual row) representing an interface on which MLD is enabled.
.1.3.6.1.2.1.91.1.1.1.1,IPV6-MLD-MIB::mldInterfaceIfIndex,Integer32,not-accessible,,current,,The internetwork-layer interface value of the interface for which MLD is enabled.
.1.3.6.1.2.1.91.1.1.1.2,IPV6-MLD-MIB::mldInterfaceQueryInterval,Unsigned32,read-create,,current,,The frequency at which MLD Host-Query packets are transmitted on this interface.
.1.3.6.1.2.1.91.1.1.1.3,IPV6-MLD-MIB::mldInterfaceStatus,INTEGER,read-create,,current,active(1):notInService(2):notReady(3):createAndGo(4):createAndWait(5):destroy(6),The activation of a row enables MLD on the interface. The destruction of a row disables MLD on the interface.
.1.3.6.1.2.1.91.1.1.1.4,IPV6-MLD-MIB::mldInterfaceVersion,Unsigned32,read-create,,current,,The version of MLD which is running on this interface. This object is a place holder to allow for new versions of MLD to be introduced. Version 1 of MLD is defined in RFC 2710.
.1.3.6.1.2.1.91.1.1.1.5,IPV6-MLD-MIB::mldInterfaceQuerier,OCTET,read-only,,current,,The address of the MLD Querier on the IPv6 subnet to which this interface is attached.
.1.3.6.1.2.1.91.1.1.1.6,IPV6-MLD-MIB::mldInterfaceQueryMaxResponseDelay,Unsigned32,read-create,,current,,The maximum query response time advertised in MLD queries on this interface.
.1.3.6.1.2.1.91.1.1.1.7,IPV6-MLD-MIB::mldInterfaceJoins,Counter32,read-only,,current,,The number of times a group membership has been added on this interface; that is, the number of times an entry for this interface has been added to the Cache Table. This object gives an indication of the amount of MLD activity over time.
.1.3.6.1.2.1.91.1.1.1.8,IPV6-MLD-MIB::mldInterfaceGroups,Gauge32,read-only,,current,,The current number of entries for this interface in the Cache Table.
.1.3.6.1.2.1.91.1.1.1.9,IPV6-MLD-MIB::mldInterfaceRobustness,Unsigned32,read-create,,current,,The Robustness Variable allows tuning for the expected packet loss on a subnet. If a subnet is expected to be lossy, the Robustness Variable may be increased. MLD is robust to (Robustness Variable-1) packet losses. The discussion of the Robustness Variable is in Section 7.1 of RFC 2710.
.1.3.6.1.2.1.91.1.1.1.10,IPV6-MLD-MIB::mldInterfaceLastListenQueryIntvl,Unsigned32,read-create,,current,,The Last Member Query Interval is the Max Response Delay inserted into Group-Specific Queries sent in response to Leave Group messages, and is also the amount of time between Group-Specific Query messages. This value may be tuned to modify the leave latency of the network. A reduced value results in reduced time to detect the loss of the last member of a group.
.1.3.6.1.2.1.91.1.1.1.11,IPV6-MLD-MIB::mldInterfaceProxyIfIndex,Integer32,read-create,,current,,Some devices implement a form of MLD proxying whereby memberships learned on the interface represented by this row, cause MLD Multicast Listener Reports to be sent on the internetwork-layer interface identified by this object. Such a device would implement mldRouterMIBGroup only on its router interfaces (those interfaces with non-zero mldInterfaceProxyIfIndex). Typically, the value of this object is 0, indicating that no proxying is being done.
.1.3.6.1.2.1.91.1.1.1.12,IPV6-MLD-MIB::mldInterfaceQuerierUpTime,TimeTicks,read-only,,current,,The time since mldInterfaceQuerier was last changed.
.1.3.6.1.2.1.91.1.1.1.13,IPV6-MLD-MIB::mldInterfaceQuerierExpiryTime,TimeTicks,read-only,,current,,The time remaining before the Other Querier Present Timer expires. If the local system is the querier, the value of this object is zero.
.1.3.6.1.2.1.91.1.2,IPV6-MLD-MIB::mldCacheTable,,not-accessible,,current,,The (conceptual) table listing the IPv6 multicast groups for which there are members on a particular interface.
.1.3.6.1.2.1.91.1.2.1,IPV6-MLD-MIB::mldCacheEntry,,not-accessible,mldCacheAddress:mldCacheIfIndex,current,,An entry (conceptual row) in the mldCacheTable.
.1.3.6.1.2.1.91.1.2.1.1,IPV6-MLD-MIB::mldCacheAddress,OCTET,not-accessible,,current,,The IPv6 multicast group address for which this entry contains information.
.1.3.6.1.2.1.91.1.2.1.2,IPV6-MLD-MIB::mldCacheIfIndex,Integer32,not-accessible,,current,,The internetwork-layer interface for which this entry contains information for an IPv6 multicast group address.
.1.3.6.1.2.1.91.1.2.1.3,IPV6-MLD-MIB::mldCacheSelf,INTEGER,read-create,,current,true(1):false(2),An indication of whether the local system is a member of this group address on this interface.
.1.3.6.1.2.1.91.1.2.1.4,IPV6-MLD-MIB::mldCacheLastReporter,OCTET,read-only,,current,,The IPv6 address of the source of the last membership report received for this IPv6 Multicast group address on this interface. If no membership report has been received, this object has the value 0::0.
.1.3.6.1.2.1.91.1.2.1.5,IPV6-MLD-MIB::mldCacheUpTime,TimeTicks,read-only,,current,,The time elapsed since this entry was created.
.1.3.6.1.2.1.91.1.2.1.6,IPV6-MLD-MIB::mldCacheExpiryTime,TimeTicks,read-only,,current,,The minimum amount of time remaining before this entry will be aged out. A value of 0 indicates that the entry is only present because mldCacheSelf is true and that if the router left the group, this entry would be aged out immediately. Note that some implementations may process Membership Reports from the local system in the same way as reports from other hosts, so a value of 0 is not required.
.1.3.6.1.2.1.91.1.2.1.7,IPV6-MLD-MIB::mldCacheStatus,INTEGER,read-create,,current,active(1):notInService(2):notReady(3):createAndGo(4):createAndWait(5):destroy(6),The status of this row, by which new entries may be created, or existing entries deleted from this table.
.1.3.6.1.2.1.91.2,IPV6-MLD-MIB::mldMIBConformance,,,,,,
.1.3.6.1.2.1.91.2.1,IPV6-MLD-MIB::mldMIBCompliances,,,,,,
.1.3.6.1.2.1.91.2.1.1,IPV6-MLD-MIB::mldHostMIBCompliance,,,,,,The compliance statement for hosts running MLD and implementing the MLD MIB.
.1.3.6.1.2.1.91.2.1.2,IPV6-MLD-MIB::mldRouterMIBCompliance,,,,,,The compliance statement for routers running MLD and implementing the MLD MIB.
.1.3.6.1.2.1.91.2.2,IPV6-MLD-MIB::mldMIBGroups,,,,,,
.1.3.6.1.2.1.91.2.2.1,IPV6-MLD-MIB::mldBaseMIBGroup,,,,,,The basic collection of objects providing management of MLD. The mldBaseMIBGroup is designed to allow for the manager creation and deletion of MLD cache entries.
.1.3.6.1.2.1.91.2.2.2,IPV6-MLD-MIB::mldRouterMIBGroup,,,,,,A collection of additional objects for management of MLD in routers.
.1.3.6.1.2.1.91.2.2.3,IPV6-MLD-MIB::mldHostMIBGroup,,,,,,A collection of additional objects for management of MLD in hosts.
.1.3.6.1.2.1.91.2.2.4,IPV6-MLD-MIB::mldProxyMIBGroup,,,,,,A collection of additional objects for management of MLD proxy devices.
.1.3.6.1.2.1.96,DIFFSERV-DSCP-TC::diffServDSCPTC,,,,,,The Textual Conventions defined in this module should be used whenever a Differentiated Services Code Point is used in a MIB.
.1.3.6.1.2.1.97,DIFFSERV-MIB::diffServMib,,,,,,This MIB defines the objects necessary to manage a device that uses the Differentiated Services Architecture described in RFC 2475. The Conceptual Model of a Differentiated Services Router provides supporting information on how such a router is modeled.
.1.3.6.1.2.1.97.1,DIFFSERV-MIB::diffServMIBObjects,,,,,,
.1.3.6.1.2.1.97.1.1,DIFFSERV-MIB::diffServDataPath,,,,,,
.1.3.6.1.2.1.97.1.1.1,DIFFSERV-MIB::diffServDataPathTable,,not-accessible,,current,,The data path table contains RowPointers indicating the start of the functional data path for each interface and traffic direction in this device. These may merge, or be separated into parallel data paths.
.1.3.6.1.2.1.97.1.1.1.1,DIFFSERV-MIB::diffServDataPathEntry,,not-accessible,ifIndex:diffServDataPathIfDirection,current,,An entry in the data path table indicates the start of a single Differentiated Services Functional Data Path in this device. These are associated with individual interfaces, logical or physical, and therefore are instantiated by ifIndex. Therefore, the interface index must have been assigned, according to the procedures applicable to that, before it can be meaningfully used. Generally, this means that the interface must exist. When diffServDataPathStorage is of type nonVolatile, however, this may reflect the configuration for an interface whose ifIndex has been assigned but for which the supporting implementation is not currently present.
.1.3.6.1.2.1.97.1.1.1.1.1,DIFFSERV-MIB::diffServDataPathIfDirection,INTEGER,not-accessible,,current,inbound(1):outbound(2),IfDirection specifies whether the reception or transmission path for this interface is in view.
.1.3.6.1.2.1.97.1.1.1.1.2,DIFFSERV-MIB::diffServDataPathStart,OBJECT,read-create,,current,,This selects the first Differentiated Services Functional Data Path Element to handle traffic for this data path. This RowPointer should point to an instance of one of: diffServClfrEntry diffServMeterEntry diffServActionEntry diffServAlgDropEntry diffServQEntry A value of zeroDotZero in this attribute indicates that no Differentiated Services treatment is performed on traffic of this data path. A pointer with the value zeroDotZero normally terminates a functional data path. Setting this to point to a target that does not exist results in an inconsistentValue error. If the row pointed to is removed or becomes inactive by other means, the treatment is as if this attribute contains a value of zeroDotZero.
.1.3.6.1.2.1.97.1.1.1.1.3,DIFFSERV-MIB::diffServDataPathStorage,INTEGER,read-create,,current,other(1):volatile(2):nonVolatile(3):permanent(4):readOnly(5),The storage type for this conceptual row. Conceptual rows having the value 'permanent' need not allow write-access to any columnar objects in the row.
.1.3.6.1.2.1.97.1.1.1.1.4,DIFFSERV-MIB::diffServDataPathStatus,INTEGER,read-create,,current,active(1):notInService(2):notReady(3):createAndGo(4):createAndWait(5):destroy(6),The status of this conceptual row. All writable objects in this row may be modified at any time.
.1.3.6.1.2.1.97.1.2,DIFFSERV-MIB::diffServClassifier,,,,,,
.1.3.6.1.2.1.97.1.2.1,DIFFSERV-MIB::diffServClfrNextFree,Unsigned32,read-only,,current,,This object contains an unused value for diffServClfrId, or a zero to indicate that none exist.
.1.3.6.1.2.1.97.1.2.2,DIFFSERV-MIB::diffServClfrTable,,not-accessible,,current,,This table enumerates all the diffserv classifier functional data path elements of this device. The actual classification definitions are defined in diffServClfrElementTable entries belonging to each classifier. An entry in this table, pointed to by a RowPointer specifying an instance of diffServClfrStatus, is frequently used as the name for a set of classifier elements, which all use the index diffServClfrId. Per the semantics of the classifier element table, these entries constitute one or more unordered sets of tests which may be simultaneously applied to a message to classify it. The primary function of this table is to ensure that the value of diffServClfrId is unique before attempting to use it in creating a diffServClfrElementEntry. Therefore, the diffServClfrEntry must be created on the same SET as the diffServClfrElementEntry, or before the diffServClfrElementEntry is created.
.1.3.6.1.2.1.97.1.2.2.1,DIFFSERV-MIB::diffServClfrEntry,,not-accessible,diffServClfrId,current,,An entry in the classifier table describes a single classifier. All classifier elements belonging to the same classifier use the classifier's diffServClfrId as part of their index.
.1.3.6.1.2.1.97.1.2.2.1.1,DIFFSERV-MIB::diffServClfrId,Unsigned32,not-accessible,,current,,An index that enumerates the classifier entries. Managers should obtain new values for row creation in this table by reading diffServClfrNextFree.
.1.3.6.1.2.1.97.1.2.2.1.2,DIFFSERV-MIB::diffServClfrStorage,INTEGER,read-create,,current,other(1):volatile(2):nonVolatile(3):permanent(4):readOnly(5),The storage type for this conceptual row. Conceptual rows having the value 'permanent' need not allow write-access to any columnar objects in the row.
.1.3.6.1.2.1.97.1.2.2.1.3,DIFFSERV-MIB::diffServClfrStatus,INTEGER,read-create,,current,active(1):notInService(2):notReady(3):createAndGo(4):createAndWait(5):destroy(6),The status of this conceptual row. All writable objects in this row may be modified at any time. Setting this variable to 'destroy' when the MIB contains one or more RowPointers pointing to it results in destruction being delayed until the row is no longer used.
.1.3.6.1.2.1.97.1.2.3,DIFFSERV-MIB::diffServClfrElementNextFree,Unsigned32,read-only,,current,,This object contains an unused value for diffServClfrElementId, or a zero to indicate that none exist.
.1.3.6.1.2.1.97.1.2.4,DIFFSERV-MIB::diffServClfrElementTable,,not-accessible,,current,,The classifier element table enumerates the relationship between classification patterns and subsequent downstream Differentiated Services Functional Data Path elements. diffServClfrElementSpecific points to a filter that specifies the classification parameters. A classifier may use filter tables of different types together. One example of a filter table defined in this MIB is diffServMultiFieldClfrTable, for IP Multi-Field Classifiers (MFCs). Such an entry might identify anything from a single micro-flow (an identifiable sub-session packet stream directed from one sending transport to the receiving transport or transports), or aggregates of those such as the traffic from a host, traffic for an application, or traffic between two hosts using an application and a given DSCP. The standard Behavior Aggregate used in the Differentiated Services Architecture is encoded as a degenerate case of such an aggregate - the traffic using a particular DSCP value. Filter tables for other filter types may be defined elsewhere.
.1.3.6.1.2.1.97.1.2.4.1,DIFFSERV-MIB::diffServClfrElementEntry,,not-accessible,diffServClfrId:diffServClfrElementId,current,,An entry in the classifier element table describes a single element of the classifier.
.1.3.6.1.2.1.97.1.2.4.1.1,DIFFSERV-MIB::diffServClfrElementId,Unsigned32,not-accessible,,current,,An index that enumerates the Classifier Element entries. Managers obtain new values for row creation in this table by reading diffServClfrElementNextFree.
.1.3.6.1.2.1.97.1.2.4.1.2,DIFFSERV-MIB::diffServClfrElementPrecedence,Unsigned32,read-create,,current,,The relative order in which classifier elements are applied: higher numbers represent classifier element with higher precedence. Classifier elements with the same order must be unambiguous i.e. they must define non-overlapping patterns, and are considered to be applied simultaneously to the traffic stream. Classifier elements with different order may overlap in their filters: the classifier element with the highest order that matches is taken. On a given interface, there must be a complete classifier in place at all times in the ingress direction. This means one or more filters must match any possible pattern. There is no such requirement in the egress direction.
.1.3.6.1.2.1.97.1.2.4.1.3,DIFFSERV-MIB::diffServClfrElementNext,OBJECT,read-create,,current,,This attribute provides one branch of the fan-out functionality of a classifier described in the Informal Differentiated Services Model section 4.1. This selects the next Differentiated Services Functional Data Path Element to handle traffic for this data path. This RowPointer should point to an instance of one of: diffServClfrEntry diffServMeterEntry diffServActionEntry diffServAlgDropEntry diffServQEntry A value of zeroDotZero in this attribute indicates no further Differentiated Services treatment is performed on traffic of this data path. The use of zeroDotZero is the normal usage for the last functional data path element of the current data path. Setting this to point to a target that does not exist results in an inconsistentValue error. If the row pointed to is removed or becomes inactive by other means, the treatment is as if this attribute contains a value of zeroDotZero.
.1.3.6.1.2.1.97.1.2.4.1.4,DIFFSERV-MIB::diffServClfrElementSpecific,OBJECT,read-create,,current,,A pointer to a valid entry in another table, filter table, that describes the applicable classification parameters, e.g. an entry in diffServMultiFieldClfrTable. The value zeroDotZero is interpreted to match anything not matched by another classifier element - only one such entry may exist for each classifier. Setting this to point to a target that does not exist results in an inconsistentValue error. If the row pointed to is removed or becomes inactive by other means, the element is ignored.
.1.3.6.1.2.1.97.1.2.4.1.5,DIFFSERV-MIB::diffServClfrElementStorage,INTEGER,read-create,,current,other(1):volatile(2):nonVolatile(3):permanent(4):readOnly(5),The storage type for this conceptual row. Conceptual rows having the value 'permanent' need not allow write-access to any columnar objects in the row.
.1.3.6.1.2.1.97.1.2.4.1.6,DIFFSERV-MIB::diffServClfrElementStatus,INTEGER,read-create,,current,active(1):notInService(2):notReady(3):createAndGo(4):createAndWait(5):destroy(6),The status of this conceptual row. All writable objects in this row may be modified at any time. Setting this variable to 'destroy' when the MIB contains one or more RowPointers pointing to it results in destruction being delayed until the row is no longer used.
.1.3.6.1.2.1.97.1.2.5,DIFFSERV-MIB::diffServMultiFieldClfrNextFree,Unsigned32,read-only,,current,,This object contains an unused value for diffServMultiFieldClfrId, or a zero to indicate that none exist.
.1.3.6.1.2.1.97.1.2.6,DIFFSERV-MIB::diffServMultiFieldClfrTable,,not-accessible,,current,,A table of IP Multi-field Classifier filter entries that a system may use to identify IP traffic.
.1.3.6.1.2.1.97.1.2.6.1,DIFFSERV-MIB::diffServMultiFieldClfrEntry,,not-accessible,diffServMultiFieldClfrId,current,,An IP Multi-field Classifier entry describes a single filter.
.1.3.6.1.2.1.97.1.2.6.1.1,DIFFSERV-MIB::diffServMultiFieldClfrId,Unsigned32,not-accessible,,current,,An index that enumerates the MultiField Classifier filter entries. Managers obtain new values for row creation in this table by reading diffServMultiFieldClfrNextFree.
.1.3.6.1.2.1.97.1.2.6.1.2,DIFFSERV-MIB::diffServMultiFieldClfrAddrType,INTEGER,read-create,,current,unknown(0):ipv4(1):ipv6(2):ipv4z(3):ipv6z(4):dns(16),The type of IP address used by this classifier entry. While other types of addresses are defined in the InetAddressType textual convention, and DNS names, a classifier can only look at packets on the wire. Therefore, this object is limited to IPv4 and IPv6 addresses.
.1.3.6.1.2.1.97.1.2.6.1.3,DIFFSERV-MIB::diffServMultiFieldClfrDstAddr,OCTET,read-create,,current,,The IP address to match against the packet's destination IP address. This may not be a DNS name, but may be an IPv4 or IPv6 prefix. diffServMultiFieldClfrDstPrefixLength indicates the number of bits that are relevant.
.1.3.6.1.2.1.97.1.2.6.1.4,DIFFSERV-MIB::diffServMultiFieldClfrDstPrefixLength,Unsigned32,read-create,,current,,The length of the CIDR Prefix carried in diffServMultiFieldClfrDstAddr. In IPv4 addresses, a length of 0 indicates a match of any address; a length of 32 indicates a match of a single host address, and a length between 0 and 32 indicates the use of a CIDR Prefix. IPv6 is similar, except that prefix lengths range from 0..128.
.1.3.6.1.2.1.97.1.2.6.1.5,DIFFSERV-MIB::diffServMultiFieldClfrSrcAddr,OCTET,read-create,,current,,The IP address to match against the packet's source IP address. This may not be a DNS name, but may be an IPv4 or IPv6 prefix. diffServMultiFieldClfrSrcPrefixLength indicates the number of bits that are relevant.
.1.3.6.1.2.1.97.1.2.6.1.6,DIFFSERV-MIB::diffServMultiFieldClfrSrcPrefixLength,Unsigned32,read-create,,current,,The length of the CIDR Prefix carried in diffServMultiFieldClfrSrcAddr. In IPv4 addresses, a length of 0 indicates a match of any address; a length of 32 indicates a match of a single host address, and a length between 0 and 32 indicates the use of a CIDR Prefix. IPv6 is similar, except that prefix lengths range from 0..128.
.1.3.6.1.2.1.97.1.2.6.1.7,DIFFSERV-MIB::diffServMultiFieldClfrDscp,Integer32,read-create,,current,,The value that the DSCP in the packet must have to match this entry. A value of -1 indicates that a specific DSCP value has not been defined and thus all DSCP values are considered a match.
.1.3.6.1.2.1.97.1.2.6.1.8,DIFFSERV-MIB::diffServMultiFieldClfrFlowId,Unsigned32,read-create,,current,,The flow identifier in an IPv6 header.
.1.3.6.1.2.1.97.1.2.6.1.9,DIFFSERV-MIB::diffServMultiFieldClfrProtocol,Unsigned32,read-create,,current,,The IP protocol to match against the IPv4 protocol number or the IPv6 Next- Header number in the packet. A value of 255 means match all. Note the protocol number of 255 is reserved by IANA, and Next-Header number of 0 is used in IPv6.
.1.3.6.1.2.1.97.1.2.6.1.10,DIFFSERV-MIB::diffServMultiFieldClfrDstL4PortMin,Unsigned32,read-create,,current,,The minimum value that the layer-4 destination port number in the packet must have in order to match this classifier entry.
.1.3.6.1.2.1.97.1.2.6.1.11,DIFFSERV-MIB::diffServMultiFieldClfrDstL4PortMax,Unsigned32,read-create,,current,,The maximum value that the layer-4 destination port number in the packet must have in order to match this classifier entry. This value must be equal to or greater than the value specified for this entry in diffServMultiFieldClfrDstL4PortMin.
.1.3.6.1.2.1.97.1.2.6.1.12,DIFFSERV-MIB::diffServMultiFieldClfrSrcL4PortMin,Unsigned32,read-create,,current,,The minimum value that the layer-4 source port number in the packet must have in order to match this classifier entry.
.1.3.6.1.2.1.97.1.2.6.1.13,DIFFSERV-MIB::diffServMultiFieldClfrSrcL4PortMax,Unsigned32,read-create,,current,,The maximum value that the layer-4 source port number in the packet must have in order to match this classifier entry. This value must be equal to or greater than the value specified for this entry in diffServMultiFieldClfrSrcL4PortMin.
.1.3.6.1.2.1.97.1.2.6.1.14,DIFFSERV-MIB::diffServMultiFieldClfrStorage,INTEGER,read-create,,current,other(1):volatile(2):nonVolatile(3):permanent(4):readOnly(5),The storage type for this conceptual row. Conceptual rows having the value 'permanent' need not allow write-access to any columnar objects in the row.
.1.3.6.1.2.1.97.1.2.6.1.15,DIFFSERV-MIB::diffServMultiFieldClfrStatus,INTEGER,read-create,,current,active(1):notInService(2):notReady(3):createAndGo(4):createAndWait(5):destroy(6),The status of this conceptual row. All writable objects in this row may be modified at any time. Setting this variable to 'destroy' when the MIB contains one or more RowPointers pointing to it results in destruction being delayed until the row is no longer used.
.1.3.6.1.2.1.97.1.3,DIFFSERV-MIB::diffServMeter,,,,,,
.1.3.6.1.2.1.97.1.3.1,DIFFSERV-MIB::diffServMeterNextFree,Unsigned32,read-only,,current,,This object contains an unused value for diffServMeterId, or a zero to indicate that none exist.
.1.3.6.1.2.1.97.1.3.2,DIFFSERV-MIB::diffServMeterTable,,not-accessible,,current,,This table enumerates specific meters that a system may use to police a stream of traffic. The traffic stream to be metered is determined by the Differentiated Services Functional Data Path Element(s) upstream of the meter i.e. by the object(s) that point to each entry in this table. This may include all traffic on an interface. Specific meter details are to be found in table entry referenced by diffServMeterSpecific.
.1.3.6.1.2.1.97.1.3.2.1,DIFFSERV-MIB::diffServMeterEntry,,not-accessible,diffServMeterId,current,,An entry in the meter table describes a single conformance level of a meter.
.1.3.6.1.2.1.97.1.3.2.1.1,DIFFSERV-MIB::diffServMeterId,Unsigned32,not-accessible,,current,,An index that enumerates the Meter entries. Managers obtain new values for row creation in this table by reading diffServMeterNextFree.
.1.3.6.1.2.1.97.1.3.2.1.2,DIFFSERV-MIB::diffServMeterSucceedNext,OBJECT,read-create,,current,,If the traffic does conform, this selects the next Differentiated Services Functional Data Path element to handle traffic for this data path. This RowPointer should point to an instance of one of: diffServClfrEntry diffServMeterEntry diffServActionEntry diffServAlgDropEntry diffServQEntry A value of zeroDotZero in this attribute indicates that no further Differentiated Services treatment is performed on traffic of this data path. The use of zeroDotZero is the normal usage for the last functional data path element of the current data path. Setting this to point to a target that does not exist results in an inconsistentValue error. If the row pointed to is removed or becomes inactive by other means, the treatment is as if this attribute contains a value of zeroDotZero.
.1.3.6.1.2.1.97.1.3.2.1.3,DIFFSERV-MIB::diffServMeterFailNext,OBJECT,read-create,,current,,If the traffic does not conform, this selects the next Differentiated Services Functional Data Path element to handle traffic for this data path. This RowPointer should point to an instance of one of: diffServClfrEntry diffServMeterEntry diffServActionEntry diffServAlgDropEntry diffServQEntry A value of zeroDotZero in this attribute indicates no further Differentiated Services treatment is performed on traffic of this data path. The use of zeroDotZero is the normal usage for the last functional data path element of the current data path. Setting this to point to a target that does not exist results in an inconsistentValue error. If the row pointed to is removed or becomes inactive by other means, the treatment is as if this attribute contains a value of zeroDotZero.
.1.3.6.1.2.1.97.1.3.2.1.4,DIFFSERV-MIB::diffServMeterSpecific,OBJECT,read-create,,current,,This indicates the behavior of the meter by pointing to an entry containing detailed parameters. Note that entries in that specific table must be managed explicitly. For example, diffServMeterSpecific may point to an entry in diffServTBParamTable, which contains an instance of a single set of Token Bucket parameters. Setting this to point to a target that does not exist results in an inconsistentValue error. If the row pointed to is removed or becomes inactive by other means, the meter always succeeds.
.1.3.6.1.2.1.97.1.3.2.1.5,DIFFSERV-MIB::diffServMeterStorage,INTEGER,read-create,,current,other(1):volatile(2):nonVolatile(3):permanent(4):readOnly(5),The storage type for this conceptual row. Conceptual rows having the value 'permanent' need not allow write-access to any columnar objects in the row.
.1.3.6.1.2.1.97.1.3.2.1.6,DIFFSERV-MIB::diffServMeterStatus,INTEGER,read-create,,current,active(1):notInService(2):notReady(3):createAndGo(4):createAndWait(5):destroy(6),The status of this conceptual row. All writable objects in this row may be modified at any time. Setting this variable to 'destroy' when the MIB contains one or more RowPointers pointing to it results in destruction being delayed until the row is no longer used.
.1.3.6.1.2.1.97.1.4,DIFFSERV-MIB::diffServTBParam,,,,,,
.1.3.6.1.2.1.97.1.4.1,DIFFSERV-MIB::diffServTBParamNextFree,Unsigned32,read-only,,current,,This object contains an unused value for diffServTBParamId, or a zero to indicate that none exist.
.1.3.6.1.2.1.97.1.4.2,DIFFSERV-MIB::diffServTBParamTable,,not-accessible,,current,,This table enumerates a single set of token bucket meter parameters that a system may use to police a stream of traffic. Such meters are modeled here as having a single rate and a single burst size. Multiple entries are used when multiple rates/burst sizes are needed.
.1.3.6.1.2.1.97.1.4.2.1,DIFFSERV-MIB::diffServTBParamEntry,,not-accessible,diffServTBParamId,current,,An entry that describes a single set of token bucket parameters.
.1.3.6.1.2.1.97.1.4.2.1.1,DIFFSERV-MIB::diffServTBParamId,Unsigned32,not-accessible,,current,,An index that enumerates the Token Bucket Parameter entries. Managers obtain new values for row creation in this table by reading diffServTBParamNextFree.
.1.3.6.1.2.1.97.1.4.2.1.2,DIFFSERV-MIB::diffServTBParamType,OBJECT,read-create,,current,,The Metering algorithm associated with the Token Bucket parameters. zeroDotZero indicates this is unknown. Standard values for generic algorithms: diffServTBParamSimpleTokenBucket, diffServTBParamAvgRate, diffServTBParamSrTCMBlind, diffServTBParamSrTCMAware, diffServTBParamTrTCMBlind, diffServTBParamTrTCMAware, and diffServTBParamTswTCM are specified in this MIB as OBJECT- IDENTITYs; additional values may be further specified in other MIBs.
.1.3.6.1.2.1.97.1.4.2.1.3,DIFFSERV-MIB::diffServTBParamRate,Unsigned32,read-create,,current,,The token-bucket rate, in kilobits per second (kbps). This attribute is used for: 1. CIR in RFC 2697 for srTCM 2. CIR and PIR in RFC 2698 for trTCM 3. CTR and PTR in RFC 2859 for TSWTCM 4. AverageRate in RFC 3290.
.1.3.6.1.2.1.97.1.4.2.1.4,DIFFSERV-MIB::diffServTBParamBurstSize,INTEGER,read-create,,current,,The maximum number of bytes in a single transmission burst. This attribute is used for: 1. CBS and EBS in RFC 2697 for srTCM 2. CBS and PBS in RFC 2698 for trTCM 3. Burst Size in RFC 3290.
.1.3.6.1.2.1.97.1.4.2.1.5,DIFFSERV-MIB::diffServTBParamInterval,Unsigned32,read-create,,current,,The time interval used with the token bucket. For: 1. Average Rate Meter, the Informal Differentiated Services Model section 5.2.1, - Delta. 2. Simple Token Bucket Meter, the Informal Differentiated Services Model section 5.1, - time interval t. 3. RFC 2859 TSWTCM, - AVG_INTERVAL. 4. RFC 2697 srTCM, RFC 2698 trTCM, - token bucket update time interval.
.1.3.6.1.2.1.97.1.4.2.1.6,DIFFSERV-MIB::diffServTBParamStorage,INTEGER,read-create,,current,other(1):volatile(2):nonVolatile(3):permanent(4):readOnly(5),The storage type for this conceptual row. Conceptual rows having the value 'permanent' need not allow write-access to any columnar objects in the row.
.1.3.6.1.2.1.97.1.4.2.1.7,DIFFSERV-MIB::diffServTBParamStatus,INTEGER,read-create,,current,active(1):notInService(2):notReady(3):createAndGo(4):createAndWait(5):destroy(6),The status of this conceptual row. All writable objects in this row may be modified at any time. Setting this variable to 'destroy' when the MIB contains one or more RowPointers pointing to it results in destruction being delayed until the row is no longer used.
.1.3.6.1.2.1.97.1.5,DIFFSERV-MIB::diffServAction,,,,,,
.1.3.6.1.2.1.97.1.5.1,DIFFSERV-MIB::diffServActionNextFree,Unsigned32,read-only,,current,,This object contains an unused value for diffServActionId, or a zero to indicate that none exist.
.1.3.6.1.2.1.97.1.5.2,DIFFSERV-MIB::diffServActionTable,,not-accessible,,current,,The Action Table enumerates actions that can be performed to a stream of traffic. Multiple actions can be concatenated. For example, traffic exiting from a meter may be counted, marked, and potentially dropped before entering a queue. Specific actions are indicated by diffServActionSpecific which points to an entry of a specific action type parameterizing the action in detail.
.1.3.6.1.2.1.97.1.5.2.1,DIFFSERV-MIB::diffServActionEntry,,not-accessible,diffServActionId,current,,Each entry in the action table allows description of one specific action to be applied to traffic.
.1.3.6.1.2.1.97.1.5.2.1.1,DIFFSERV-MIB::diffServActionId,Unsigned32,not-accessible,,current,,An index that enumerates the Action entries. Managers obtain new values for row creation in this table by reading diffServActionNextFree.
.1.3.6.1.2.1.97.1.5.2.1.2,DIFFSERV-MIB::diffServActionInterface,Integer32,read-create,,current,,The interface index (value of ifIndex) that this action occurs on. This may be derived from the diffServDataPathStartEntry's index by extension through the various RowPointers. However, as this may be difficult for a network management station, it is placed here as well. If this is indeterminate, the value is zero. This is of especial relevance when reporting the counters which may apply to traffic crossing an interface: diffServCountActOctets, diffServCountActPkts, diffServAlgDropOctets, diffServAlgDropPkts, diffServAlgRandomDropOctets, and diffServAlgRandomDropPkts. It is also especially relevant to the queue and scheduler which may be subsequently applied.
.1.3.6.1.2.1.97.1.5.2.1.3,DIFFSERV-MIB::diffServActionNext,OBJECT,read-create,,current,,This selects the next Differentiated Services Functional Data Path Element to handle traffic for this data path. This RowPointer should point to an instance of one of: diffServClfrEntry diffServMeterEntry diffServActionEntry diffServAlgDropEntry diffServQEntry A value of zeroDotZero in this attribute indicates no further Differentiated Services treatment is performed on traffic of this data path. The use of zeroDotZero is the normal usage for the last functional data path element of the current data path. Setting this to point to a target that does not exist results in an inconsistentValue error. If the row pointed to is removed or becomes inactive by other means, the treatment is as if this attribute contains a value of zeroDotZero.
.1.3.6.1.2.1.97.1.5.2.1.4,DIFFSERV-MIB::diffServActionSpecific,OBJECT,read-create,,current,,A pointer to an object instance providing additional information for the type of action indicated by this action table entry. For the standard actions defined by this MIB module, this should point to either a diffServDscpMarkActEntry or a diffServCountActEntry. For other actions, it may point to an object instance defined in some other MIB. Setting this to point to a target that does not exist results in an inconsistentValue error. If the row pointed to is removed or becomes inactive by other means, the Meter should be treated as if it were not present. This may lead to incorrect policy behavior.
.1.3.6.1.2.1.97.1.5.2.1.5,DIFFSERV-MIB::diffServActionStorage,INTEGER,read-create,,current,other(1):volatile(2):nonVolatile(3):permanent(4):readOnly(5),The storage type for this conceptual row. Conceptual rows having the value 'permanent' need not allow write-access to any columnar objects in the row.
.1.3.6.1.2.1.97.1.5.2.1.6,DIFFSERV-MIB::diffServActionStatus,INTEGER,read-create,,current,active(1):notInService(2):notReady(3):createAndGo(4):createAndWait(5):destroy(6),The status of this conceptual row. All writable objects in this row may be modified at any time. Setting this variable to 'destroy' when the MIB contains one or more RowPointers pointing to it results in destruction being delayed until the row is no longer used.
.1.3.6.1.2.1.97.1.5.3,DIFFSERV-MIB::diffServDscpMarkActTable,,not-accessible,,current,,This table enumerates specific DSCPs used for marking or remarking the DSCP field of IP packets. The entries of this table may be referenced by a diffServActionSpecific attribute.
.1.3.6.1.2.1.97.1.5.3.1,DIFFSERV-MIB::diffServDscpMarkActEntry,,not-accessible,diffServDscpMarkActDscp,current,,An entry in the DSCP mark action table that describes a single DSCP used for marking.
.1.3.6.1.2.1.97.1.5.3.1.1,DIFFSERV-MIB::diffServDscpMarkActDscp,Integer32,read-only,,current,,The DSCP that this Action will store into the DSCP field of the subject. It is quite possible that the only packets subject to this Action are already marked with this DSCP. Note also that Differentiated Services processing may result in packet being marked on both ingress to a network and on egress from it, and that ingress and egress can occur in the same router.
.1.3.6.1.2.1.97.1.5.4,DIFFSERV-MIB::diffServCountActNextFree,Unsigned32,read-only,,current,,This object contains an unused value for diffServCountActId, or a zero to indicate that none exist.
.1.3.6.1.2.1.97.1.5.5,DIFFSERV-MIB::diffServCountActTable,,not-accessible,,current,,This table contains counters for all the traffic passing through an action element.
.1.3.6.1.2.1.97.1.5.5.1,DIFFSERV-MIB::diffServCountActEntry,,not-accessible,diffServCountActId,current,,An entry in the count action table describes a single set of traffic counters.
.1.3.6.1.2.1.97.1.5.5.1.1,DIFFSERV-MIB::diffServCountActId,Unsigned32,not-accessible,,current,,An index that enumerates the Count Action entries. Managers obtain new values for row creation in this table by reading diffServCountActNextFree.
.1.3.6.1.2.1.97.1.5.5.1.2,DIFFSERV-MIB::diffServCountActOctets,Counter64,read-only,,current,,The number of octets at the Action data path element. Discontinuities in the value of this counter can occur at re- initialization of the management system and at other times as indicated by the value of ifCounterDiscontinuityTime on the relevant interface.
.1.3.6.1.2.1.97.1.5.5.1.3,DIFFSERV-MIB::diffServCountActPkts,Counter64,read-only,,current,,The number of packets at the Action data path element. Discontinuities in the value of this counter can occur at re- initialization of the management system and at other times as indicated by the value of ifCounterDiscontinuityTime on the relevant interface.
.1.3.6.1.2.1.97.1.5.5.1.4,DIFFSERV-MIB::diffServCountActStorage,INTEGER,read-create,,current,other(1):volatile(2):nonVolatile(3):permanent(4):readOnly(5),The storage type for this conceptual row. Conceptual rows having the value 'permanent' need not allow write-access to any columnar objects in the row.
.1.3.6.1.2.1.97.1.5.5.1.5,DIFFSERV-MIB::diffServCountActStatus,INTEGER,read-create,,current,active(1):notInService(2):notReady(3):createAndGo(4):createAndWait(5):destroy(6),The status of this conceptual row. All writable objects in this row may be modified at any time. Setting this variable to 'destroy' when the MIB contains one or more RowPointers pointing to it results in destruction being delayed until the row is no longer used.
.1.3.6.1.2.1.97.1.6,DIFFSERV-MIB::diffServAlgDrop,,,,,,
.1.3.6.1.2.1.97.1.6.1,DIFFSERV-MIB::diffServAlgDropNextFree,Unsigned32,read-only,,current,,This object contains an unused value for diffServAlgDropId, or a zero to indicate that none exist.
.1.3.6.1.2.1.97.1.6.2,DIFFSERV-MIB::diffServAlgDropTable,,not-accessible,,current,,The algorithmic drop table contains entries describing an element that drops packets according to some algorithm.
.1.3.6.1.2.1.97.1.6.2.1,DIFFSERV-MIB::diffServAlgDropEntry,,not-accessible,diffServAlgDropId,current,,An entry describes a process that drops packets according to some algorithm. Further details of the algorithm type are to be found in diffServAlgDropType and with more detail parameter entry pointed to by diffServAlgDropSpecific when necessary.
.1.3.6.1.2.1.97.1.6.2.1.1,DIFFSERV-MIB::diffServAlgDropId,Unsigned32,not-accessible,,current,,An index that enumerates the Algorithmic Dropper entries. Managers obtain new values for row creation in this table by reading diffServAlgDropNextFree.
.1.3.6.1.2.1.97.1.6.2.1.2,DIFFSERV-MIB::diffServAlgDropType,INTEGER,read-create,,current,other(1):tailDrop(2):headDrop(3):randomDrop(4):alwaysDrop(5),The type of algorithm used by this dropper. The value other(1) requires further specification in some other MIB module. In the tailDrop(2) algorithm, diffServAlgDropQThreshold represents the maximum depth of the queue, pointed to by diffServAlgDropQMeasure, beyond which all newly arriving packets will be dropped. In the headDrop(3) algorithm, if a packet arrives when the current depth of the queue, pointed to by diffServAlgDropQMeasure, is at diffServAlgDropQThreshold, packets currently at the head of the queue are dropped to make room for the new packet to be enqueued at the tail of the queue. In the randomDrop(4) algorithm, on packet arrival, an Active Queue Management algorithm is executed which may randomly drop a packet. This algorithm may be proprietary, and it may drop either the arriving packet or another packet in the queue. diffServAlgDropSpecific points to a diffServRandomDropEntry that describes the algorithm. For this algorithm, diffServAlgDropQThreshold is understood to be the absolute maximum size of the queue and additional parameters are described in diffServRandomDropTable. The alwaysDrop(5) algorithm is as its name specifies; always drop. In this case, the other configuration values in this Entry are not meaningful; There is no useful 'next' processing step, there is no queue, and parameters describing the queue are not useful. Therefore, diffServAlgDropNext, diffServAlgDropMeasure, and diffServAlgDropSpecific are all zeroDotZero.
.1.3.6.1.2.1.97.1.6.2.1.3,DIFFSERV-MIB::diffServAlgDropNext,OBJECT,read-create,,current,,This selects the next Differentiated Services Functional Data Path Element to handle traffic for this data path. This RowPointer should point to an instance of one of: diffServClfrEntry diffServMeterEntry diffServActionEntry diffServQEntry A value of zeroDotZero in this attribute indicates no further Differentiated Services treatment is performed on traffic of this data path. The use of zeroDotZero is the normal usage for the last functional data path element of the current data path. When diffServAlgDropType is alwaysDrop(5), this object is ignored. Setting this to point to a target that does not exist results in an inconsistentValue error. If the row pointed to is removed or becomes inactive by other means, the treatment is as if this attribute contains a value of zeroDotZero.
.1.3.6.1.2.1.97.1.6.2.1.4,DIFFSERV-MIB::diffServAlgDropQMeasure,OBJECT,read-create,,current,,Points to an entry in the diffServQTable to indicate the queue that a drop algorithm is to monitor when deciding whether to drop a packet. If the row pointed to does not exist, the algorithmic dropper element is considered inactive. Setting this to point to a target that does not exist results in an inconsistentValue error. If the row pointed to is removed or becomes inactive by other means, the treatment is as if this attribute contains a value of zeroDotZero.
.1.3.6.1.2.1.97.1.6.2.1.5,DIFFSERV-MIB::diffServAlgDropQThreshold,Unsigned32,read-create,,current,,A threshold on the depth in bytes of the queue being measured at which a trigger is generated to the dropping algorithm, unless diffServAlgDropType is alwaysDrop(5) where this object is ignored. For the tailDrop(2) or headDrop(3) algorithms, this represents the depth of the queue, pointed to by diffServAlgDropQMeasure, at which the drop action will take place. Other algorithms will need to define their own semantics for this threshold.
.1.3.6.1.2.1.97.1.6.2.1.6,DIFFSERV-MIB::diffServAlgDropSpecific,OBJECT,read-create,,current,,Points to a table entry that provides further detail regarding a drop algorithm. Entries with diffServAlgDropType equal to other(1) may have this point to a table defined in another MIB module. Entries with diffServAlgDropType equal to randomDrop(4) must have this point to an entry in diffServRandomDropTable. For all other algorithms specified in this MIB, this should take the value zeroDotZero. The diffServAlgDropType is authoritative for the type of the drop algorithm and the specific parameters for the drop algorithm needs to be evaluated based on the diffServAlgDropType. Setting this to point to a target that does not exist results in an inconsistentValue error. If the row pointed to is removed or becomes inactive by other means, the treatment is as if this attribute contains a value of zeroDotZero.
.1.3.6.1.2.1.97.1.6.2.1.7,DIFFSERV-MIB::diffServAlgDropOctets,Counter64,read-only,,current,,The number of octets that have been deterministically dropped by this drop process. Discontinuities in the value of this counter can occur at re- initialization of the management system and at other times as indicated by the value of ifCounterDiscontinuityTime on the relevant interface.
.1.3.6.1.2.1.97.1.6.2.1.8,DIFFSERV-MIB::diffServAlgDropPkts,Counter64,read-only,,current,,The number of packets that have been deterministically dropped by this drop process. Discontinuities in the value of this counter can occur at re- initialization of the management system and at other times as indicated by the value of ifCounterDiscontinuityTime on the relevant interface.
.1.3.6.1.2.1.97.1.6.2.1.9,DIFFSERV-MIB::diffServAlgRandomDropOctets,Counter64,read-only,,current,,The number of octets that have been randomly dropped by this drop process. This counter applies, therefore, only to random droppers. Discontinuities in the value of this counter can occur at re- initialization of the management system and at other times as indicated by the value of ifCounterDiscontinuityTime on the relevant interface.
.1.3.6.1.2.1.97.1.6.2.1.10,DIFFSERV-MIB::diffServAlgRandomDropPkts,Counter64,read-only,,current,,The number of packets that have been randomly dropped by this drop process. This counter applies, therefore, only to random droppers. Discontinuities in the value of this counter can occur at re- initialization of the management system and at other times as indicated by the value of ifCounterDiscontinuityTime on the relevant interface.
.1.3.6.1.2.1.97.1.6.2.1.11,DIFFSERV-MIB::diffServAlgDropStorage,INTEGER,read-create,,current,other(1):volatile(2):nonVolatile(3):permanent(4):readOnly(5),The storage type for this conceptual row. Conceptual rows having the value 'permanent' need not allow write-access to any columnar objects in the row.
.1.3.6.1.2.1.97.1.6.2.1.12,DIFFSERV-MIB::diffServAlgDropStatus,INTEGER,read-create,,current,active(1):notInService(2):notReady(3):createAndGo(4):createAndWait(5):destroy(6),The status of this conceptual row. All writable objects in this row may be modified at any time. Setting this variable to 'destroy' when the MIB contains one or more RowPointers pointing to it results in destruction being delayed until the row is no longer used.
.1.3.6.1.2.1.97.1.6.3,DIFFSERV-MIB::diffServRandomDropNextFree,Unsigned32,read-only,,current,,This object contains an unused value for diffServRandomDropId, or a zero to indicate that none exist.
.1.3.6.1.2.1.97.1.6.4,DIFFSERV-MIB::diffServRandomDropTable,,not-accessible,,current,,The random drop table contains entries describing a process that drops packets randomly. Entries in this table are pointed to by diffServAlgDropSpecific.
.1.3.6.1.2.1.97.1.6.4.1,DIFFSERV-MIB::diffServRandomDropEntry,,not-accessible,diffServRandomDropId,current,,An entry describes a process that drops packets according to a random algorithm.
.1.3.6.1.2.1.97.1.6.4.1.1,DIFFSERV-MIB::diffServRandomDropId,Unsigned32,not-accessible,,current,,An index that enumerates the Random Drop entries. Managers obtain new values for row creation in this table by reading diffServRandomDropNextFree.
.1.3.6.1.2.1.97.1.6.4.1.2,DIFFSERV-MIB::diffServRandomDropMinThreshBytes,Unsigned32,read-create,,current,,The average queue depth in bytes, beyond which traffic has a non-zero probability of being dropped. Changes in this variable may or may not be reflected in the reported value of diffServRandomDropMinThreshPkts.
.1.3.6.1.2.1.97.1.6.4.1.3,DIFFSERV-MIB::diffServRandomDropMinThreshPkts,Unsigned32,read-create,,current,,The average queue depth in packets, beyond which traffic has a non-zero probability of being dropped. Changes in this variable may or may not be reflected in the reported value of diffServRandomDropMinThreshBytes.
.1.3.6.1.2.1.97.1.6.4.1.4,DIFFSERV-MIB::diffServRandomDropMaxThreshBytes,Unsigned32,read-create,,current,,The average queue depth beyond which traffic has a probability indicated by diffServRandomDropProbMax of being dropped or marked. Note that this differs from the physical queue limit, which is stored in diffServAlgDropQThreshold. Changes in this variable may or may not be reflected in the reported value of diffServRandomDropMaxThreshPkts.
.1.3.6.1.2.1.97.1.6.4.1.5,DIFFSERV-MIB::diffServRandomDropMaxThreshPkts,Unsigned32,read-create,,current,,The average queue depth beyond which traffic has a probability indicated by diffServRandomDropProbMax of being dropped or marked. Note that this differs from the physical queue limit, which is stored in diffServAlgDropQThreshold. Changes in this variable may or may not be reflected in the reported value of diffServRandomDropMaxThreshBytes.
.1.3.6.1.2.1.97.1.6.4.1.6,DIFFSERV-MIB::diffServRandomDropProbMax,Unsigned32,read-create,,current,,The worst case random drop probability, expressed in drops per thousand packets. For example, if in the worst case every arriving packet may be dropped (100%) for a period, this has the value 1000. Alternatively, if in the worst case only one percent (1%) of traffic may be dropped, it has the value 10.
.1.3.6.1.2.1.97.1.6.4.1.7,DIFFSERV-MIB::diffServRandomDropWeight,Unsigned32,read-create,,current,,The weighting of past history in affecting the Exponentially Weighted Moving Average function that calculates the current average queue depth. The equation uses diffServRandomDropWeight/65536 as the coefficient for the new sample in the equation, and (65536 - diffServRandomDropWeight)/65536 as the coefficient of the old value. Implementations may limit the values of diffServRandomDropWeight to a subset of the possible range of values, such as powers of two. Doing this would facilitate implementation of the Exponentially Weighted Moving Average using shift instructions or registers.
.1.3.6.1.2.1.97.1.6.4.1.8,DIFFSERV-MIB::diffServRandomDropSamplingRate,Unsigned32,read-create,,current,,The number of times per second the queue is sampled for queue average calculation. A value of zero is used to mean that the queue is sampled approximately each time a packet is enqueued (or dequeued).
.1.3.6.1.2.1.97.1.6.4.1.9,DIFFSERV-MIB::diffServRandomDropStorage,INTEGER,read-create,,current,other(1):volatile(2):nonVolatile(3):permanent(4):readOnly(5),The storage type for this conceptual row. Conceptual rows having the value 'permanent' need not allow write-access to any columnar objects in the row.
.1.3.6.1.2.1.97.1.6.4.1.10,DIFFSERV-MIB::diffServRandomDropStatus,INTEGER,read-create,,current,active(1):notInService(2):notReady(3):createAndGo(4):createAndWait(5):destroy(6),The status of this conceptual row. All writable objects in this row may be modified at any time. Setting this variable to 'destroy' when the MIB contains one or more RowPointers pointing to it results in destruction being delayed until the row is no longer used.
.1.3.6.1.2.1.97.1.7,DIFFSERV-MIB::diffServQueue,,,,,,
.1.3.6.1.2.1.97.1.7.1,DIFFSERV-MIB::diffServQNextFree,Unsigned32,read-only,,current,,This object contains an unused value for diffServQId, or a zero to indicate that none exist.
.1.3.6.1.2.1.97.1.7.2,DIFFSERV-MIB::diffServQTable,,not-accessible,,current,,The Queue Table enumerates the individual queues. Note that the MIB models queuing systems as composed of individual queues, one per class of traffic, even though they may in fact be structured as classes of traffic scheduled using a common calendar queue, or in other ways.
.1.3.6.1.2.1.97.1.7.2.1,DIFFSERV-MIB::diffServQEntry,,not-accessible,diffServQId,current,,An entry in the Queue Table describes a single queue or class of traffic.
.1.3.6.1.2.1.97.1.7.2.1.1,DIFFSERV-MIB::diffServQId,Unsigned32,not-accessible,,current,,An index that enumerates the Queue entries. Managers obtain new values for row creation in this table by reading diffServQNextFree.
.1.3.6.1.2.1.97.1.7.2.1.2,DIFFSERV-MIB::diffServQNext,OBJECT,read-create,,current,,This selects the next Differentiated Services Scheduler. The RowPointer must point to a diffServSchedulerEntry. A value of zeroDotZero in this attribute indicates an incomplete diffServQEntry instance. In such a case, the entry has no operational effect, since it has no parameters to give it meaning. Setting this to point to a target that does not exist results in an inconsistentValue error. If the row pointed to is removed or becomes inactive by other means, the treatment is as if this attribute contains a value of zeroDotZero.
.1.3.6.1.2.1.97.1.7.2.1.3,DIFFSERV-MIB::diffServQMinRate,OBJECT,read-create,,current,,This RowPointer indicates the diffServMinRateEntry that the scheduler, pointed to by diffServQNext, should use to service this queue. If the row pointed to is zeroDotZero, the minimum rate and priority is unspecified. Setting this to point to a target that does not exist results in an inconsistentValue error. If the row pointed to is removed or becomes inactive by other means, the treatment is as if this attribute contains a value of zeroDotZero.
.1.3.6.1.2.1.97.1.7.2.1.4,DIFFSERV-MIB::diffServQMaxRate,OBJECT,read-create,,current,,This RowPointer indicates the diffServMaxRateEntry that the scheduler, pointed to by diffServQNext, should use to service this queue. If the row pointed to is zeroDotZero, the maximum rate is the line speed of the interface. Setting this to point to a target that does not exist results in an inconsistentValue error. If the row pointed to is removed or becomes inactive by other means, the treatment is as if this attribute contains a value of zeroDotZero.
.1.3.6.1.2.1.97.1.7.2.1.5,DIFFSERV-MIB::diffServQStorage,INTEGER,read-create,,current,other(1):volatile(2):nonVolatile(3):permanent(4):readOnly(5),The storage type for this conceptual row. Conceptual rows having the value 'permanent' need not allow write-access to any columnar objects in the row.
.1.3.6.1.2.1.97.1.7.2.1.6,DIFFSERV-MIB::diffServQStatus,INTEGER,read-create,,current,active(1):notInService(2):notReady(3):createAndGo(4):createAndWait(5):destroy(6),The status of this conceptual row. All writable objects in this row may be modified at any time. Setting this variable to 'destroy' when the MIB contains one or more RowPointers pointing to it results in destruction being delayed until the row is no longer used.
.1.3.6.1.2.1.97.1.8,DIFFSERV-MIB::diffServScheduler,,,,,,
.1.3.6.1.2.1.97.1.8.1,DIFFSERV-MIB::diffServSchedulerNextFree,Unsigned32,read-only,,current,,This object contains an unused value for diffServSchedulerId, or a zero to indicate that none exist.
.1.3.6.1.2.1.97.1.8.2,DIFFSERV-MIB::diffServSchedulerTable,,not-accessible,,current,,The Scheduler Table enumerates packet schedulers. Multiple scheduling algorithms can be used on a given data path, with each algorithm described by one diffServSchedulerEntry.
.1.3.6.1.2.1.97.1.8.2.1,DIFFSERV-MIB::diffServSchedulerEntry,,not-accessible,diffServSchedulerId,current,,An entry in the Scheduler Table describing a single instance of a scheduling algorithm.
.1.3.6.1.2.1.97.1.8.2.1.1,DIFFSERV-MIB::diffServSchedulerId,Unsigned32,not-accessible,,current,,An index that enumerates the Scheduler entries. Managers obtain new values for row creation in this table by reading diffServSchedulerNextFree.
.1.3.6.1.2.1.97.1.8.2.1.2,DIFFSERV-MIB::diffServSchedulerNext,OBJECT,read-create,,current,,This selects the next Differentiated Services Functional Data Path Element to handle traffic for this data path. This normally is null (zeroDotZero), or points to a diffServSchedulerEntry or a diffServQEntry. However, this RowPointer may also point to an instance of: diffServClfrEntry, diffServMeterEntry, diffServActionEntry, diffServAlgDropEntry. It would point another diffServSchedulerEntry when implementing multiple scheduler methods for the same data path, such as having one set of queues scheduled by WRR and that group participating in a priority scheduling system in which other queues compete with it in that way. It might also point to a second scheduler in a hierarchical scheduling system. If the row pointed to is zeroDotZero, no further Differentiated Services treatment is performed on traffic of this data path. Setting this to point to a target that does not exist results in an inconsistentValue error. If the row pointed to is removed or becomes inactive by other means, the treatment is as if this attribute contains a value of zeroDotZero.
.1.3.6.1.2.1.97.1.8.2.1.3,DIFFSERV-MIB::diffServSchedulerMethod,OBJECT,read-create,,current,,The scheduling algorithm used by this Scheduler. zeroDotZero indicates that this is unknown. Standard values for generic algorithms: diffServSchedulerPriority, diffServSchedulerWRR, and diffServSchedulerWFQ are specified in this MIB; additional values may be further specified in other MIBs.
.1.3.6.1.2.1.97.1.8.2.1.4,DIFFSERV-MIB::diffServSchedulerMinRate,OBJECT,read-create,,current,,This RowPointer indicates the entry in diffServMinRateTable which indicates the priority or minimum output rate from this scheduler. This attribute is used only when there is more than one level of scheduler. When it has the value zeroDotZero, it indicates that no minimum rate or priority is imposed. Setting this to point to a target that does not exist results in an inconsistentValue error. If the row pointed to is removed or becomes inactive by other means, the treatment is as if this attribute contains a value of zeroDotZero.
.1.3.6.1.2.1.97.1.8.2.1.5,DIFFSERV-MIB::diffServSchedulerMaxRate,OBJECT,read-create,,current,,This RowPointer indicates the entry in diffServMaxRateTable which indicates the maximum output rate from this scheduler. When more than one maximum rate applies (eg, when a multi-rate shaper is in view), it points to the first of those rate entries. This attribute is used only when there is more than one level of scheduler. When it has the value zeroDotZero, it indicates that no maximum rate is imposed. Setting this to point to a target that does not exist results in an inconsistentValue error. If the row pointed to is removed or becomes inactive by other means, the treatment is as if this attribute contains a value of zeroDotZero.
.1.3.6.1.2.1.97.1.8.2.1.6,DIFFSERV-MIB::diffServSchedulerStorage,INTEGER,read-create,,current,other(1):volatile(2):nonVolatile(3):permanent(4):readOnly(5),The storage type for this conceptual row. Conceptual rows having the value 'permanent' need not allow write-access to any columnar objects in the row.
.1.3.6.1.2.1.97.1.8.2.1.7,DIFFSERV-MIB::diffServSchedulerStatus,INTEGER,read-create,,current,active(1):notInService(2):notReady(3):createAndGo(4):createAndWait(5):destroy(6),The status of this conceptual row. All writable objects in this row may be modified at any time. Setting this variable to 'destroy' when the MIB contains one or more RowPointers pointing to it results in destruction being delayed until the row is no longer used.
.1.3.6.1.2.1.97.1.8.3,DIFFSERV-MIB::diffServMinRateNextFree,Unsigned32,read-only,,current,,This object contains an unused value for diffServMinRateId, or a zero to indicate that none exist.
.1.3.6.1.2.1.97.1.8.4,DIFFSERV-MIB::diffServMinRateTable,,not-accessible,,current,,The Minimum Rate Parameters Table enumerates individual sets of scheduling parameter that can be used/reused by Queues and Schedulers.
.1.3.6.1.2.1.97.1.8.4.1,DIFFSERV-MIB::diffServMinRateEntry,,not-accessible,diffServMinRateId,current,,An entry in the Minimum Rate Parameters Table describes a single set of scheduling parameters for use by one or more queues or schedulers.
.1.3.6.1.2.1.97.1.8.4.1.1,DIFFSERV-MIB::diffServMinRateId,Unsigned32,not-accessible,,current,,An index that enumerates the Scheduler Parameter entries. Managers obtain new values for row creation in this table by reading diffServMinRateNextFree.
.1.3.6.1.2.1.97.1.8.4.1.2,DIFFSERV-MIB::diffServMinRatePriority,Unsigned32,read-create,,current,,The priority of this input to the associated scheduler, relative to the scheduler's other inputs. A queue or scheduler with a larger numeric value will be served before another with a smaller numeric value.
.1.3.6.1.2.1.97.1.8.4.1.3,DIFFSERV-MIB::diffServMinRateAbsolute,Unsigned32,read-create,,current,,The minimum absolute rate, in kilobits/sec, that a downstream scheduler element should allocate to this queue. If the value is zero, then there is effectively no minimum rate guarantee. If the value is non-zero, the scheduler will assure the servicing of this queue to at least this rate. Note that this attribute value and that of diffServMinRateRelative are coupled: changes to one will affect the value of the other. They are linked by the following equation, in that setting one will change the other: diffServMinRateRelative = (diffServMinRateAbsolute*1000000)/ifSpeed or, if appropriate: diffServMinRateRelative = diffServMinRateAbsolute/ifHighSpeed
.1.3.6.1.2.1.97.1.8.4.1.4,DIFFSERV-MIB::diffServMinRateRelative,Unsigned32,read-create,,current,,The minimum rate that a downstream scheduler element should allocate to this queue, relative to the maximum rate of the interface as reported by ifSpeed or ifHighSpeed, in units of 1/1000 of 1. If the value is zero, then there is effectively no minimum rate guarantee. If the value is non-zero, the scheduler will assure the servicing of this queue to at least this rate. Note that this attribute value and that of diffServMinRateAbsolute are coupled: changes to one will affect the value of the other. They are linked by the following equation, in that setting one will change the other: diffServMinRateRelative = (diffServMinRateAbsolute*1000000)/ifSpeed or, if appropriate: diffServMinRateRelative = diffServMinRateAbsolute/ifHighSpeed
.1.3.6.1.2.1.97.1.8.4.1.5,DIFFSERV-MIB::diffServMinRateStorage,INTEGER,read-create,,current,other(1):volatile(2):nonVolatile(3):permanent(4):readOnly(5),The storage type for this conceptual row. Conceptual rows having the value 'permanent' need not allow write-access to any columnar objects in the row.
.1.3.6.1.2.1.97.1.8.4.1.6,DIFFSERV-MIB::diffServMinRateStatus,INTEGER,read-create,,current,active(1):notInService(2):notReady(3):createAndGo(4):createAndWait(5):destroy(6),The status of this conceptual row. All writable objects in this row may be modified at any time. Setting this variable to 'destroy' when the MIB contains one or more RowPointers pointing to it results in destruction being delayed until the row is no longer used.
.1.3.6.1.2.1.97.1.8.5,DIFFSERV-MIB::diffServMaxRateNextFree,Unsigned32,read-only,,current,,This object contains an unused value for diffServMaxRateId, or a zero to indicate that none exist.
.1.3.6.1.2.1.97.1.8.6,DIFFSERV-MIB::diffServMaxRateTable,,not-accessible,,current,,The Maximum Rate Parameter Table enumerates individual sets of scheduling parameter that can be used/reused by Queues and Schedulers.
.1.3.6.1.2.1.97.1.8.6.1,DIFFSERV-MIB::diffServMaxRateEntry,,not-accessible,diffServMaxRateId:diffServMaxRateLevel,current,,An entry in the Maximum Rate Parameter Table describes a single set of scheduling parameters for use by one or more queues or schedulers.
.1.3.6.1.2.1.97.1.8.6.1.1,DIFFSERV-MIB::diffServMaxRateId,Unsigned32,not-accessible,,current,,An index that enumerates the Maximum Rate Parameter entries. Managers obtain new values for row creation in this table by reading diffServMaxRateNextFree.
.1.3.6.1.2.1.97.1.8.6.1.2,DIFFSERV-MIB::diffServMaxRateLevel,Unsigned32,not-accessible,,current,,An index that indicates which level of a multi-rate shaper is being given its parameters. A multi-rate shaper has some number of rate levels. Frame Relay's dual rate specification refers to a 'committed' and an 'excess' rate; ATM's dual rate specification refers to a 'mean' and a 'peak' rate. This table is generalized to support an arbitrary number of rates. The committed or mean rate is level 1, the peak rate (if any) is the highest level rate configured, and if there are other rates they are distributed in monotonically increasing order between them.
.1.3.6.1.2.1.97.1.8.6.1.3,DIFFSERV-MIB::diffServMaxRateAbsolute,Unsigned32,read-create,,current,,The maximum rate in kilobits/sec that a downstream scheduler element should allocate to this queue. If the value is zero, then there is effectively no maximum rate limit and that the scheduler should attempt to be work conserving for this queue. If the value is non-zero, the scheduler will limit the servicing of this queue to, at most, this rate in a non-work-conserving manner. Note that this attribute value and that of diffServMaxRateRelative are coupled: changes to one will affect the value of the other. They are linked by the following equation, in that setting one will change the other: diffServMaxRateRelative = (diffServMaxRateAbsolute*1000000)/ifSpeed or, if appropriate: diffServMaxRateRelative = diffServMaxRateAbsolute/ifHighSpeed
.1.3.6.1.2.1.97.1.8.6.1.4,DIFFSERV-MIB::diffServMaxRateRelative,Unsigned32,read-create,,current,,The maximum rate that a downstream scheduler element should allocate to this queue, relative to the maximum rate of the interface as reported by ifSpeed or ifHighSpeed, in units of 1/1000 of 1. If the value is zero, then there is effectively no maximum rate limit and the scheduler should attempt to be work conserving for this queue. If the value is non-zero, the scheduler will limit the servicing of this queue to, at most, this rate in a non-work-conserving manner. Note that this attribute value and that of diffServMaxRateAbsolute are coupled: changes to one will affect the value of the other. They are linked by the following equation, in that setting one will change the other: diffServMaxRateRelative = (diffServMaxRateAbsolute*1000000)/ifSpeed or, if appropriate: diffServMaxRateRelative = diffServMaxRateAbsolute/ifHighSpeed
.1.3.6.1.2.1.97.1.8.6.1.5,DIFFSERV-MIB::diffServMaxRateThreshold,INTEGER,read-create,,current,,The number of bytes of queue depth at which the rate of a multi-rate scheduler will increase to the next output rate. In the last conceptual row for such a shaper, this threshold is ignored and by convention is zero.
.1.3.6.1.2.1.97.1.8.6.1.6,DIFFSERV-MIB::diffServMaxRateStorage,INTEGER,read-create,,current,other(1):volatile(2):nonVolatile(3):permanent(4):readOnly(5),The storage type for this conceptual row. Conceptual rows having the value 'permanent' need not allow write-access to any columnar objects in the row.
.1.3.6.1.2.1.97.1.8.6.1.7,DIFFSERV-MIB::diffServMaxRateStatus,INTEGER,read-create,,current,active(1):notInService(2):notReady(3):createAndGo(4):createAndWait(5):destroy(6),The status of this conceptual row. All writable objects in this row may be modified at any time. Setting this variable to 'destroy' when the MIB contains one or more RowPointers pointing to it results in destruction being delayed until the row is no longer used.
.1.3.6.1.2.1.97.2,DIFFSERV-MIB::diffServMIBConformance,,,,,,
.1.3.6.1.2.1.97.2.1,DIFFSERV-MIB::diffServMIBCompliances,,,,,,
.1.3.6.1.2.1.97.2.1.1,DIFFSERV-MIB::diffServMIBFullCompliance,,,,,,When this MIB is implemented with support for read-create, then such an implementation can claim full compliance. Such devices can then be both monitored and configured with this MIB.
.1.3.6.1.2.1.97.2.1.2,DIFFSERV-MIB::diffServMIBReadOnlyCompliance,,,,,,When this MIB is implemented without support for read-create (i.e. in read-only mode), then such an implementation can claim read-only compliance. Such a device can then be monitored but can not be configured with this MIB.
.1.3.6.1.2.1.97.2.2,DIFFSERV-MIB::diffServMIBGroups,,,,,,
.1.3.6.1.2.1.97.2.2.1,DIFFSERV-MIB::diffServMIBDataPathGroup,,,,,,The Data Path Group defines the MIB Objects that describe a functional data path.
.1.3.6.1.2.1.97.2.2.2,DIFFSERV-MIB::diffServMIBClfrGroup,,,,,,The Classifier Group defines the MIB Objects that describe the list the starts of individual classifiers.
.1.3.6.1.2.1.97.2.2.3,DIFFSERV-MIB::diffServMIBClfrElementGroup,,,,,,The Classifier Element Group defines the MIB Objects that describe the classifier elements that make up a generic classifier.
.1.3.6.1.2.1.97.2.2.4,DIFFSERV-MIB::diffServMIBMultiFieldClfrGroup,,,,,,The Multi-field Classifier Group defines the MIB Objects that describe a classifier element for matching on various fields of an IP and upper-layer protocol header.
.1.3.6.1.2.1.97.2.2.5,DIFFSERV-MIB::diffServMIBMeterGroup,,,,,,The Meter Group defines the objects used in describing a generic meter element.
.1.3.6.1.2.1.97.2.2.6,DIFFSERV-MIB::diffServMIBTBParamGroup,,,,,,The Token-Bucket Meter Group defines the objects used in describing a token bucket meter element.
.1.3.6.1.2.1.97.2.2.7,DIFFSERV-MIB::diffServMIBActionGroup,,,,,,The Action Group defines the objects used in describing a generic action element.
.1.3.6.1.2.1.97.2.2.8,DIFFSERV-MIB::diffServMIBDscpMarkActGroup,,,,,,The DSCP Mark Action Group defines the objects used in describing a DSCP Marking Action element.
.1.3.6.1.2.1.97.2.2.9,DIFFSERV-MIB::diffServMIBCounterGroup,,,,,,A collection of objects providing information specific to packet-oriented network interfaces.
.1.3.6.1.2.1.97.2.2.10,DIFFSERV-MIB::diffServMIBAlgDropGroup,,,,,,The Algorithmic Drop Group contains the objects that describe algorithmic dropper operation and configuration.
.1.3.6.1.2.1.97.2.2.11,DIFFSERV-MIB::diffServMIBRandomDropGroup,,,,,,The Random Drop Group augments the Algorithmic Drop Group for random dropper operation and configuration.
.1.3.6.1.2.1.97.2.2.12,DIFFSERV-MIB::diffServMIBQGroup,,,,,,The Queue Group contains the objects that describe an interface's queues.
.1.3.6.1.2.1.97.2.2.13,DIFFSERV-MIB::diffServMIBSchedulerGroup,,,,,,The Scheduler Group contains the objects that describe packet schedulers on interfaces.
.1.3.6.1.2.1.97.2.2.14,DIFFSERV-MIB::diffServMIBMinRateGroup,,,,,,The Minimum Rate Parameter Group contains the objects that describe packet schedulers' minimum rate or priority guarantees.
.1.3.6.1.2.1.97.2.2.15,DIFFSERV-MIB::diffServMIBMaxRateGroup,,,,,,The Maximum Rate Parameter Group contains the objects that describe packet schedulers' maximum rate guarantees.
.1.3.6.1.2.1.97.3,DIFFSERV-MIB::diffServMIBAdmin,,,,,,
.1.3.6.1.2.1.97.3.1,DIFFSERV-MIB::diffServTBMeters,,,,,,
.1.3.6.1.2.1.97.3.1.1,DIFFSERV-MIB::diffServTBParamSimpleTokenBucket,,,,,,Two Parameter Token Bucket Meter as described in the Informal Differentiated Services Model section 5.2.3.
.1.3.6.1.2.1.97.3.1.2,DIFFSERV-MIB::diffServTBParamAvgRate,,,,,,Average Rate Meter as described in the Informal Differentiated Services Model section 5.2.1.
.1.3.6.1.2.1.97.3.1.3,DIFFSERV-MIB::diffServTBParamSrTCMBlind,,,,,,Single Rate Three Color Marker Metering as defined by RFC 2697, in the `Color Blind' mode as described by the RFC.
.1.3.6.1.2.1.97.3.1.4,DIFFSERV-MIB::diffServTBParamSrTCMAware,,,,,,Single Rate Three Color Marker Metering as defined by RFC 2697, in the `Color Aware' mode as described by the RFC.
.1.3.6.1.2.1.97.3.1.5,DIFFSERV-MIB::diffServTBParamTrTCMBlind,,,,,,Two Rate Three Color Marker Metering as defined by RFC 2698, in the `Color Blind' mode as described by the RFC.
.1.3.6.1.2.1.97.3.1.6,DIFFSERV-MIB::diffServTBParamTrTCMAware,,,,,,Two Rate Three Color Marker Metering as defined by RFC 2698, in the `Color Aware' mode as described by the RFC.
.1.3.6.1.2.1.97.3.1.7,DIFFSERV-MIB::diffServTBParamTswTCM,,,,,,Time Sliding Window Three Color Marker Metering as defined by RFC 2859.
.1.3.6.1.2.1.97.3.2,DIFFSERV-MIB::diffServSchedulers,,,,,,
.1.3.6.1.2.1.97.3.2.1,DIFFSERV-MIB::diffServSchedulerPriority,,,,,,For use with diffServSchedulerMethod to indicate the Priority scheduling method. This is defined as an algorithm in which the presence of data in a queue or set of queues absolutely precludes dequeue from another queue or set of queues of lower priority. Note that attributes from diffServMinRateEntry of the queues/schedulers feeding this scheduler are used when determining the next packet to schedule.
.1.3.6.1.2.1.97.3.2.2,DIFFSERV-MIB::diffServSchedulerWRR,,,,,,For use with diffServSchedulerMethod to indicate the Weighted Round Robin scheduling method, defined as any algorithm in which a set of queues are visited in a fixed order, and varying amounts of traffic are removed from each queue in turn to implement an average output rate by class. Notice attributes from diffServMinRateEntry of the queues/schedulers feeding this scheduler are used when determining the next packet to schedule.
.1.3.6.1.2.1.97.3.2.3,DIFFSERV-MIB::diffServSchedulerWFQ,,,,,,For use with diffServSchedulerMethod to indicate the Weighted Fair Queuing scheduling method, defined as any algorithm in which a set of queues are conceptually visited in some order, to implement an average output rate by class. Notice attributes from diffServMinRateEntry of the queues/schedulers feeding this scheduler are used when determining the next packet to schedule.
.1.3.6.1.2.1.100,TRANSPORT-ADDRESS-MIB::transportAddressMIB,,,,,,This MIB module provides commonly used transport address definitions. Copyright (C) The Internet Society (2002). This version of this MIB module is part of RFC 3419; see the RFC itself for full legal notices.
.1.3.6.1.2.1.100.1,TRANSPORT-ADDRESS-MIB::transportDomains,,,,,,
.1.3.6.1.2.1.100.1.1,TRANSPORT-ADDRESS-MIB::transportDomainUdpIpv4,,,,,,The UDP over IPv4 transport domain. The corresponding transport address is of type TransportAddressIPv4 for global IPv4 addresses.
.1.3.6.1.2.1.100.1.2,TRANSPORT-ADDRESS-MIB::transportDomainUdpIpv6,,,,,,The UDP over IPv6 transport domain. The corresponding transport address is of type TransportAddressIPv6 for global IPv6 addresses.
.1.3.6.1.2.1.100.1.3,TRANSPORT-ADDRESS-MIB::transportDomainUdpIpv4z,,,,,,The UDP over IPv4 transport domain. The corresponding transport address is of type TransportAddressIPv4z for scoped IPv4 addresses with a zone index.
.1.3.6.1.2.1.100.1.4,TRANSPORT-ADDRESS-MIB::transportDomainUdpIpv6z,,,,,,The UDP over IPv6 transport domain. The corresponding transport address is of type TransportAddressIPv6z for scoped IPv6 addresses with a zone index.
.1.3.6.1.2.1.100.1.5,TRANSPORT-ADDRESS-MIB::transportDomainTcpIpv4,,,,,,The TCP over IPv4 transport domain. The corresponding transport address is of type TransportAddressIPv4 for global IPv4 addresses.
.1.3.6.1.2.1.100.1.6,TRANSPORT-ADDRESS-MIB::transportDomainTcpIpv6,,,,,,The TCP over IPv6 transport domain. The corresponding transport address is of type TransportAddressIPv6 for global IPv6 addresses.
.1.3.6.1.2.1.100.1.7,TRANSPORT-ADDRESS-MIB::transportDomainTcpIpv4z,,,,,,The TCP over IPv4 transport domain. The corresponding transport address is of type TransportAddressIPv4z for scoped IPv4 addresses with a zone index.
.1.3.6.1.2.1.100.1.8,TRANSPORT-ADDRESS-MIB::transportDomainTcpIpv6z,,,,,,The TCP over IPv6 transport domain. The corresponding transport address is of type TransportAddressIPv6z for scoped IPv6 addresses with a zone index.
.1.3.6.1.2.1.100.1.9,TRANSPORT-ADDRESS-MIB::transportDomainSctpIpv4,,,,,,The SCTP over IPv4 transport domain. The corresponding transport address is of type TransportAddressIPv4 for global IPv4 addresses. This transport domain usually represents the primary address on multihomed SCTP endpoints.
.1.3.6.1.2.1.100.1.10,TRANSPORT-ADDRESS-MIB::transportDomainSctpIpv6,,,,,,The SCTP over IPv6 transport domain. The corresponding transport address is of type TransportAddressIPv6 for global IPv6 addresses. This transport domain usually represents the primary address on multihomed SCTP endpoints.
.1.3.6.1.2.1.100.1.11,TRANSPORT-ADDRESS-MIB::transportDomainSctpIpv4z,,,,,,The SCTP over IPv4 transport domain. The corresponding transport address is of type TransportAddressIPv4z for scoped IPv4 addresses with a zone index. This transport domain usually represents the primary address on multihomed SCTP endpoints.
.1.3.6.1.2.1.100.1.12,TRANSPORT-ADDRESS-MIB::transportDomainSctpIpv6z,,,,,,The SCTP over IPv6 transport domain. The corresponding transport address is of type TransportAddressIPv6z for scoped IPv6 addresses with a zone index. This transport domain usually represents the primary address on multihomed SCTP endpoints.
.1.3.6.1.2.1.100.1.13,TRANSPORT-ADDRESS-MIB::transportDomainLocal,,,,,,The Posix Local IPC transport domain. The corresponding transport address is of type TransportAddressLocal. The Posix Local IPC transport domain incorporates the well-known UNIX domain sockets.
.1.3.6.1.2.1.100.1.14,TRANSPORT-ADDRESS-MIB::transportDomainUdpDns,,,,,,The UDP transport domain using fully qualified domain names. The corresponding transport address is of type TransportAddressDns.
.1.3.6.1.2.1.100.1.15,TRANSPORT-ADDRESS-MIB::transportDomainTcpDns,,,,,,The TCP transport domain using fully qualified domain names. The corresponding transport address is of type TransportAddressDns.
.1.3.6.1.2.1.100.1.16,TRANSPORT-ADDRESS-MIB::transportDomainSctpDns,,,,,,The SCTP transport domain using fully qualified domain names. The corresponding transport address is of type TransportAddressDns.
.1.3.6.1.2.1.103,IPV6-FLOW-LABEL-MIB::ipv6FlowLabelMIB,,,,,,This MIB module provides commonly used textual conventions for IPv6 Flow Labels. Copyright (C) The Internet Society (2003). This version of this MIB module is part of RFC 3595, see the RFC itself for full legal notices. 
.1.3.6.1.2.1.105,POWER-ETHERNET-MIB::powerEthernetMIB,,,,,,The MIB module for managing Power Source Equipment (PSE) working according to the IEEE 802.af Powered Ethernet (DTE Power via MDI) standard. The following terms are used throughout this MIB module. For complete formal definitions, the IEEE 802.3 standards should be consulted wherever possible: Group - A recommended, but optional, entity defined by the IEEE 802.3 management standard, in order to support a modular numbering scheme. The classical example allows an implementor to represent field-replaceable units as groups of ports, with the port numbering matching the modular hardware implementation. Port - This entity identifies the port within the group for which this entry contains information. The numbering scheme for ports is implementation specific. Copyright (c) The Internet Society (2003). This version of this MIB module is part of RFC 3621; See the RFC itself for full legal notices.
.1.3.6.1.2.1.105.0,POWER-ETHERNET-MIB::pethNotifications,,,,,,
.1.3.6.1.2.1.105.0.1,POWER-ETHERNET-MIB::pethPsePortOnOffNotification,,,,,, This Notification indicates if Pse Port is delivering or not power to the PD. This Notification SHOULD be sent on every status change except in the searching mode. At least 500 msec must elapse between notifications being emitted by the same object instance.
.1.3.6.1.2.1.105.0.2,POWER-ETHERNET-MIB::pethMainPowerUsageOnNotification,,,,,, This Notification indicate PSE Threshold usage indication is on, the usage power is above the threshold. At least 500 msec must elapse between notifications being emitted by the same object instance.
.1.3.6.1.2.1.105.0.3,POWER-ETHERNET-MIB::pethMainPowerUsageOffNotification,,,,,, This Notification indicates PSE Threshold usage indication off, the usage power is below the threshold. At least 500 msec must elapse between notifications being emitted by the same object instance.
.1.3.6.1.2.1.105.1,POWER-ETHERNET-MIB::pethObjects,,,,,,
.1.3.6.1.2.1.105.1.1,POWER-ETHERNET-MIB::pethPsePortTable,,not-accessible,,current,,A table of objects that display and control the power characteristics of power Ethernet ports on a Power Source Entity (PSE) device. This group will be implemented in managed power Ethernet switches and mid-span devices. Values of all read-write objects in this table are persistent at restart/reboot.
.1.3.6.1.2.1.105.1.1.1,POWER-ETHERNET-MIB::pethPsePortEntry,,not-accessible,pethPsePortGroupIndex:pethPsePortIndex,current,,A set of objects that display and control the power characteristics of a power Ethernet PSE port.
.1.3.6.1.2.1.105.1.1.1.1,POWER-ETHERNET-MIB::pethPsePortGroupIndex,Integer32,not-accessible,,current,,This variable uniquely identifies the group containing the port to which a power Ethernet PSE is connected. Group means box in the stack, module in a rack and the value 1 MUST be used for non-modular devices. Furthermore, the same value MUST be used in this variable, pethMainPseGroupIndex, and pethNotificationControlGroupIndex to refer to a given box in a stack or module in the rack.
.1.3.6.1.2.1.105.1.1.1.2,POWER-ETHERNET-MIB::pethPsePortIndex,Integer32,not-accessible,,current,,This variable uniquely identifies the power Ethernet PSE port within group pethPsePortGroupIndex to which the power Ethernet PSE entry is connected.
.1.3.6.1.2.1.105.1.1.1.3,POWER-ETHERNET-MIB::pethPsePortAdminEnable,INTEGER,read-write,,current,true(1):false(2),true (1) An interface which can provide the PSE functions. false(2) The interface will act as it would if it had no PSE function.
.1.3.6.1.2.1.105.1.1.1.4,POWER-ETHERNET-MIB::pethPsePortPowerPairsControlAbility,INTEGER,read-only,,current,true(1):false(2),Describes the capability of controlling the power pairs functionality to switch pins for sourcing power. The value true indicate that the device has the capability to control the power pairs. When false the PSE Pinout Alternative used cannot be controlled through the PethPsePortAdminEnable attribute.
.1.3.6.1.2.1.105.1.1.1.5,POWER-ETHERNET-MIB::pethPsePortPowerPairs,INTEGER,read-write,,current,signal(1):spare(2),Describes or controls the pairs in use. If the value of pethPsePortPowerPairsControl is true, this object is writable. A value of signal(1) means that the signal pairs only are in use. A value of spare(2) means that the spare pairs only are in use.
.1.3.6.1.2.1.105.1.1.1.6,POWER-ETHERNET-MIB::pethPsePortDetectionStatus,INTEGER,read-only,,current,disabled(1):searching(2):deliveringPower(3):fault(4):test(5):otherFault(6),Describes the operational status of the port PD detection. A value of disabled(1)- indicates that the PSE State diagram is in the state DISABLED. A value of deliveringPower(3) - indicates that the PSE State diagram is in the state POWER_ON for a duration greater than tlim max (see IEEE Std 802.3af Table 33-5 tlim). A value of fault(4) - indicates that the PSE State diagram is in the state TEST_ERROR. A value of test(5) - indicates that the PSE State diagram is in the state TEST_MODE. A value of otherFault(6) - indicates that the PSE State diagram is in the state IDLE due to the variable error_conditions. A value of searching(2)- indicates the PSE State diagram is in a state other than those listed above.
.1.3.6.1.2.1.105.1.1.1.7,POWER-ETHERNET-MIB::pethPsePortPowerPriority,INTEGER,read-write,,current,critical(1):high(2):low(3),This object controls the priority of the port from the point of view of a power management algorithm. The priority that is set by this variable could be used by a control mechanism that prevents over current situations by disconnecting first ports with lower power priority. Ports that connect devices critical to the operation of the network - like the E911 telephones ports - should be set to higher priority.
.1.3.6.1.2.1.105.1.1.1.8,POWER-ETHERNET-MIB::pethPsePortMPSAbsentCounter,Counter32,read-only,,current,,This counter is incremented when the PSE state diagram transitions directly from the state POWER_ON to the state IDLE due to tmpdo_timer_done being asserted.
.1.3.6.1.2.1.105.1.1.1.9,POWER-ETHERNET-MIB::pethPsePortType,OCTET,read-write,,current,,A manager will set the value of this variable to indicate the type of powered device that is connected to the port. The default value supplied by the agent if no value has ever been set should be a zero-length octet string.
.1.3.6.1.2.1.105.1.1.1.10,POWER-ETHERNET-MIB::pethPsePortPowerClassifications,INTEGER,read-only,,current,class0(1):class1(2):class2(3):class3(4):class4(5),Classification is a way to tag different terminals on the Power over LAN network according to their power consumption. Devices such as IP telephones, WLAN access points and others, will be classified according to their power requirements. The meaning of the classification labels is defined in the IEEE specification. This variable is valid only while a PD is being powered, that is, while the attribute pethPsePortDetectionStatus is reporting the enumeration deliveringPower.
.1.3.6.1.2.1.105.1.1.1.11,POWER-ETHERNET-MIB::pethPsePortInvalidSignatureCounter,Counter32,read-only,,current,,This counter is incremented when the PSE state diagram enters the state SIGNATURE_INVALID.
.1.3.6.1.2.1.105.1.1.1.12,POWER-ETHERNET-MIB::pethPsePortPowerDeniedCounter,Counter32,read-only,,current,,This counter is incremented when the PSE state diagram enters the state POWER_DENIED.
.1.3.6.1.2.1.105.1.1.1.13,POWER-ETHERNET-MIB::pethPsePortOverLoadCounter,Counter32,read-only,,current,,This counter is incremented when the PSE state diagram enters the state ERROR_DELAY_OVER.
.1.3.6.1.2.1.105.1.1.1.14,POWER-ETHERNET-MIB::pethPsePortShortCounter,Counter32,read-only,,current,,This counter is incremented when the PSE state diagram enters the state ERROR_DELAY_SHORT.
.1.3.6.1.2.1.105.1.3,POWER-ETHERNET-MIB::pethMainPseObjects,,,,,,
.1.3.6.1.2.1.105.1.3.1,POWER-ETHERNET-MIB::pethMainPseTable,,not-accessible,,current,,A table of objects that display and control attributes of the main power source in a PSE device. Ethernet switches are one example of boxes that would support these objects. Values of all read-write objects in this table are persistent at restart/reboot.
.1.3.6.1.2.1.105.1.3.1.1,POWER-ETHERNET-MIB::pethMainPseEntry,,not-accessible,pethMainPseGroupIndex,current,,A set of objects that display and control the Main power of a PSE. 
.1.3.6.1.2.1.105.1.3.1.1.1,POWER-ETHERNET-MIB::pethMainPseGroupIndex,Integer32,not-accessible,,current,,This variable uniquely identifies the group to which power Ethernet PSE is connected. Group means (box in the stack, module in a rack) and the value 1 MUST be used for non-modular devices. Furthermore, the same value MUST be used in this variable, pethPsePortGroupIndex, and pethNotificationControlGroupIndex to refer to a given box in a stack or module in a rack.
.1.3.6.1.2.1.105.1.3.1.1.2,POWER-ETHERNET-MIB::pethMainPsePower,Gauge32,read-only,,current,,The nominal power of the PSE expressed in Watts.
.1.3.6.1.2.1.105.1.3.1.1.3,POWER-ETHERNET-MIB::pethMainPseOperStatus,INTEGER,read-only,,current,on(1):off(2):faulty(3),The operational status of the main PSE.
.1.3.6.1.2.1.105.1.3.1.1.4,POWER-ETHERNET-MIB::pethMainPseConsumptionPower,Gauge32,read-only,,current,,Measured usage power expressed in Watts.
.1.3.6.1.2.1.105.1.3.1.1.5,POWER-ETHERNET-MIB::pethMainPseUsageThreshold,Integer32,read-write,,current,,The usage threshold expressed in percents for comparing the measured power and initiating an alarm if the threshold is exceeded.
.1.3.6.1.2.1.105.1.4,POWER-ETHERNET-MIB::pethNotificationControl,,,,,,
.1.3.6.1.2.1.105.1.4.1,POWER-ETHERNET-MIB::pethNotificationControlTable,,not-accessible,,current,,A table of objects that display and control the Notification on a PSE device. Values of all read-write objects in this table are persistent at restart/reboot.
.1.3.6.1.2.1.105.1.4.1.1,POWER-ETHERNET-MIB::pethNotificationControlEntry,,not-accessible,pethNotificationControlGroupIndex,current,,A set of objects that control the Notification events.
.1.3.6.1.2.1.105.1.4.1.1.1,POWER-ETHERNET-MIB::pethNotificationControlGroupIndex,Integer32,not-accessible,,current,,This variable uniquely identifies the group. Group means box in the stack, module in a rack and the value 1 MUST be used for non-modular devices. Furthermore, the same value MUST be used in this variable, pethPsePortGroupIndex, and pethMainPseGroupIndex to refer to a given box in a stack or module in a rack. 
.1.3.6.1.2.1.105.1.4.1.1.2,POWER-ETHERNET-MIB::pethNotificationControlEnable,INTEGER,read-write,,current,true(1):false(2),This object controls, on a per-group basis, whether or not notifications from the agent are enabled. The value true(1) means that notifications are enabled; the value false(2) means that they are not.
.1.3.6.1.2.1.105.2,POWER-ETHERNET-MIB::pethConformance,,,,,,
.1.3.6.1.2.1.105.2.1,POWER-ETHERNET-MIB::pethCompliances,,,,,,
.1.3.6.1.2.1.105.2.1.1,POWER-ETHERNET-MIB::pethCompliance,,,,,,Describes the requirements for conformance to the Power Ethernet MIB.
.1.3.6.1.2.1.105.2.2,POWER-ETHERNET-MIB::pethGroups,,,,,,
.1.3.6.1.2.1.105.2.2.1,POWER-ETHERNET-MIB::pethPsePortGroup,,,,,,PSE Port objects.
.1.3.6.1.2.1.105.2.2.2,POWER-ETHERNET-MIB::pethMainPseGroup,,,,,,Main PSE Objects. 
.1.3.6.1.2.1.105.2.2.3,POWER-ETHERNET-MIB::pethNotificationControlGroup,,,,,,Notification Control Objects. 
.1.3.6.1.2.1.105.2.2.4,POWER-ETHERNET-MIB::pethPsePortNotificationGroup,,,,,,Pse Port Notifications.
.1.3.6.1.2.1.105.2.2.5,POWER-ETHERNET-MIB::pethMainPowerNotificationGroup,,,,,,Main PSE Notifications.
.1.3.6.1.2.1.107,HC-PerfHist-TC-MIB::hcPerfHistTCMIB,,,,,,This MIB Module provides Textual Conventions to be used by systems supporting 15 minute based performance history counts that require high-capacity counts. Copyright (C) The Internet Society (2004). This version of this MIB module is part of RFC 3705: see the RFC itself for full legal notices.
.1.3.6.1.2.1.131,ENTITY-STATE-MIB::entityStateMIB,,,,,,This MIB defines a state extension to the Entity MIB.  Copyright at The Internet Society 2005. This version of this MIB module is part of RFC 4268; see the RFC itself for full legal notices.
.1.3.6.1.2.1.131.0,ENTITY-STATE-MIB::entStateNotifications,,,,,,
.1.3.6.1.2.1.131.0.1,ENTITY-STATE-MIB::entStateOperEnabled,,,,,,An entStateOperEnabled notification signifies that the SNMP entity, acting in an agent role, has detected that the entStateOper object for one of its entities has transitioned into the 'enabled' state. The entity this notification refers can be identified by extracting the entPhysicalIndex from one of the variable bindings. The entStateAdmin and entStateAlarm varbinds may be examined to find out additional information on the administrative state at the time of the operation state change as well as to find out whether there were any known alarms against the entity at that time that may explain why the physical entity has become operationally disabled.
.1.3.6.1.2.1.131.0.2,ENTITY-STATE-MIB::entStateOperDisabled,,,,,,An entStateOperDisabled notification signifies that the SNMP entity, acting in an agent role, has detected that the entStateOper object for one of its entities has transitioned into the 'disabled' state. The entity this notification refers can be identified by extracting the entPhysicalIndex from one of the variable bindings. The entStateAdmin and entStateAlarm varbinds may be examined to find out additional information on the administrative state at the time of the operation state change as well as to find out whether there were any known alarms against the entity at that time that may affect the physical entity's ability to stay operationally enabled.
.1.3.6.1.2.1.131.1,ENTITY-STATE-MIB::entStateObjects,,,,,,
.1.3.6.1.2.1.131.1.1,ENTITY-STATE-MIB::entStateTable,,not-accessible,,current,,A table of information about state/status of entities. This is a sparse augment of the entPhysicalTable. Entries appear in this table for values of entPhysicalClass [RFC 4133] that in this implementation are able to report any of the state or status stored in this table. 
.1.3.6.1.2.1.131.1.1.1,ENTITY-STATE-MIB::entStateEntry,,not-accessible,entPhysicalIndex,current,,State information about this physical entity.
.1.3.6.1.2.1.131.1.1.1.1,ENTITY-STATE-MIB::entStateLastChanged,OCTET,read-only,,current,,The value of this object is the date and time when the value of any of entStateAdmin, entStateOper, entStateUsage, entStateAlarm, or entStateStandby changed for this entity. If there has been no change since the last re-initialization of the local system, this object contains the date and time of local system initialization. If there has been no change since the entity was added to the local system, this object contains the date and time of the insertion.
.1.3.6.1.2.1.131.1.1.1.2,ENTITY-STATE-MIB::entStateAdmin,INTEGER,read-write,,current,unknown(1):locked(2):shuttingDown(3):unlocked(4),The administrative state for this entity. This object refers to an entities administrative permission to service both other entities within its containment hierarchy as well other users of its services defined by means outside the scope of this MIB. Setting this object to 'notSupported' will result in an 'inconsistentValue' error. For entities that do not support administrative state, all set operations will result in an 'inconsistentValue' error. Some physical entities exhibit only a subset of the remaining administrative state values. Some entities cannot be locked, and hence this object exhibits only the 'unlocked' state. Other entities cannot be shutdown gracefully, and hence this object does not exhibit the 'shuttingDown' state. A value of 'inconsistentValue' will be returned if attempts are made to set this object to values not supported by its administrative model.
.1.3.6.1.2.1.131.1.1.1.3,ENTITY-STATE-MIB::entStateOper,INTEGER,read-only,,current,unknown(1):disabled(2):enabled(3):testing(4),The operational state for this entity. Note that unlike the state model used within the Interfaces MIB [RFC 2863], this object does not follow the administrative state. An administrative state of down does not predict an operational state of disabled. A value of 'testing' means that entity currently being tested and cannot therefore report whether it is operational or not. A value of 'disabled' means that an entity is totally inoperable and unable to provide service both to entities within its containment hierarchy, or to other receivers of its service as defined in ways outside the scope of this MIB. A value of 'enabled' means that an entity is fully or partially operable and able to provide service both to entities within its containment hierarchy, or to other receivers of its service as defined in ways outside the scope of this MIB. Note that some implementations may not be able to accurately report entStateOper while the entStateAdmin object has a value other than 'unlocked'. In these cases, this object MUST have a value of 'unknown'.
.1.3.6.1.2.1.131.1.1.1.4,ENTITY-STATE-MIB::entStateUsage,INTEGER,read-only,,current,unknown(1):idle(2):active(3):busy(4),The usage state for this entity. This object refers to an entity's ability to service more physical entities in a containment hierarchy. A value of 'idle' means this entity is able to contain other entities but that no other entity is currently contained within this entity. A value of 'active' means that at least one entity is contained within this entity, but that it could handle more. A value of 'busy' means that the entity is unable to handle any additional entities being contained in it. Some entities will exhibit only a subset of the usage state values. Entities that are unable to ever service any entities within a containment hierarchy will always have a usage state of 'busy'. Some entities will only ever be able to support one entity within its containment hierarchy and will therefore only exhibit values of 'idle' and 'busy'.
.1.3.6.1.2.1.131.1.1.1.5,ENTITY-STATE-MIB::entStateAlarm,BITS,read-only,,current,unknown(0):underRepair(1):critical(2):major(3):minor(4):warning(5):indeterminate(6),The alarm status for this entity. It does not include the alarms raised on child components within its containment hierarchy. A value of 'unknown' means that this entity is unable to report alarm state. Note that this differs from 'indeterminate', which means that alarm state is supported and there are alarms against this entity, but the severity of some of the alarms is not known. If no bits are set, then this entity supports reporting of alarms, but there are currently no active alarms against this entity.
.1.3.6.1.2.1.131.1.1.1.6,ENTITY-STATE-MIB::entStateStandby,INTEGER,read-only,,current,unknown(1):hotStandby(2):coldStandby(3):providingService(4),The standby status for this entity. Some entities will exhibit only a subset of the remaining standby state values. If this entity cannot operate in a standby role, the value of this object will always be 'providingService'.
.1.3.6.1.2.1.131.2,ENTITY-STATE-MIB::entStateConformance,,,,,,
.1.3.6.1.2.1.131.2.1,ENTITY-STATE-MIB::entStateCompliances,,,,,,
.1.3.6.1.2.1.131.2.1.1,ENTITY-STATE-MIB::entStateCompliance,,,,,,The compliance statement for systems supporting the Entity State MIB.
.1.3.6.1.2.1.131.2.2,ENTITY-STATE-MIB::entStateGroups,,,,,,
.1.3.6.1.2.1.131.2.2.1,ENTITY-STATE-MIB::entStateGroup,,,,,,Standard Entity State group.
.1.3.6.1.2.1.131.2.2.2,ENTITY-STATE-MIB::entStateNotificationsGroup,,,,,,Standard Entity State Notification group.
.1.3.6.1.2.1.136,T11-TC-MIB::t11TcMIB,,,,,,This module defines textual conventions used in T11 MIBs. Copyright (C) The Internet Society (2006). This version of this MIB module is part of RFC 4439; see the RFC itself for full legal notices.
.1.3.6.1.2.1.138,ISIS-MIB::isisMIB,,,,,,This document describes a management information base for the IS-IS Routing protocol, as described in ISO 10589, when it is used to construct routing tables for IP networks, as described in RFC 1195. This document is based on a 1994 IETF document by Chris Gunner. This version has been modified to include current syntax, to exclude portions of the protocol that are not relevant to IP, and to add management support for current practice. Copyright (C) The Internet Society (2006). This version of this MIB module is part of RFC 4444; see the RFC itself for full legal notices.
.1.3.6.1.2.1.138.0,ISIS-MIB::isisNotifications,,,,,,
.1.3.6.1.2.1.138.0.1,ISIS-MIB::isisDatabaseOverload,,,,,,This notification is generated when the system enters or leaves the Overload state. The number of times this has been generated and cleared is kept track of by isisSysStatLSPDbaseOloads.
.1.3.6.1.2.1.138.0.2,ISIS-MIB::isisManualAddressDrops,,,,,,This notification is generated when one of the manual areaAddresses assigned to this system is ignored when computing routes. The object isisNotificationAreaAddress describes the area that has been dropped. The number of times this event has been generated is counted by isisSysStatManAddrDropFromAreas. The agent must throttle the generation of consecutive isisManualAddressDrops notifications so that there is at least a 5-second gap between notifications of this type. When notifications are throttled, they are dropped, not queued for sending at a future time.
.1.3.6.1.2.1.138.0.3,ISIS-MIB::isisCorruptedLSPDetected,,,,,,This notification is generated when we find that an LSP that was stored in memory has become corrupted. The number of times this has been generated is counted by isisSysCorrLSPs. We forward an LSP ID. We may have independent knowledge of the ID, but in some implementations there is a chance that the ID itself will be corrupted.
.1.3.6.1.2.1.138.0.4,ISIS-MIB::isisAttemptToExceedMaxSequence,,,,,,When the sequence number on an LSP we generate wraps the 32-bit sequence counter, we purge and wait to re-announce this information. This notification describes that event. Since these should not be generated rapidly, we generate an event each time this happens. While the first 6 bytes of the LSPID are ours, the other two contain useful information.
.1.3.6.1.2.1.138.0.5,ISIS-MIB::isisIDLenMismatch,,,,,,A notification sent when we receive a PDU with a different value for the System ID Length. This notification includes an index to identify the circuit where we saw the PDU and the header of the PDU, which may help a network manager identify the source of the confusion. The agent must throttle the generation of consecutive isisIDLenMismatch notifications so that there is at least a 5-second gap between notifications of this type. When notifications are throttled, they are dropped, not queued for sending at a future time.
.1.3.6.1.2.1.138.0.6,ISIS-MIB::isisMaxAreaAddressesMismatch,,,,,,A notification sent when we receive a PDU with a different value for the Maximum Area Addresses. This notification includes the header of the packet, which may help a network manager identify the source of the confusion. The agent must throttle the generation of consecutive isisMaxAreaAddressesMismatch notifications so that there is at least a 5-second gap between notifications of this type. When notifications are throttled, they are dropped, not queued for sending at a future time.
.1.3.6.1.2.1.138.0.7,ISIS-MIB::isisOwnLSPPurge,,,,,,A notification sent when we receive a PDU with our systemID and zero age. This notification includes the circuit Index and router ID from the LSP, if available, which may help a network manager identify the source of the confusion.
.1.3.6.1.2.1.138.0.8,ISIS-MIB::isisSequenceNumberSkip,,,,,,When we receive an LSP with our System ID and different contents, we may need to reissue the LSP with a higher sequence number. We send this notification if we need to increase the sequence number by more than one. If two Intermediate Systems are configured with the same System ID, this notification will fire.
.1.3.6.1.2.1.138.0.9,ISIS-MIB::isisAuthenticationTypeFailure,,,,,,A notification sent when we receive a PDU with the wrong authentication type field. This notification includes the header of the packet, which may help a network manager identify the source of the confusion. The agent must throttle the generation of consecutive isisAuthenticationTypeFailure notifications so that there is at least a 5-second gap between notifications of this type. When notifications are throttled, they are dropped, not queued for sending at a future time.
.1.3.6.1.2.1.138.0.10,ISIS-MIB::isisAuthenticationFailure,,,,,,A notification sent when we receive a PDU with an incorrect authentication information field. This notification includes the header of the packet, which may help a network manager identify the source of the confusion. The agent must throttle the generation of consecutive isisAuthenticationFailure notifications so that there is at least a 5-second gap between notifications of this type. When notifications are throttled, they are dropped, not queued for sending at a future time.
.1.3.6.1.2.1.138.0.11,ISIS-MIB::isisVersionSkew,,,,,,A notification sent when we receive a Hello PDU from an IS running a different version of the protocol. This notification includes the header of the packet, which may help a network manager identify the source of the confusion. The agent must throttle the generation of consecutive isisVersionSkew notifications so that there is at least a 5-second gap between notifications of this type. When notifications are throttled, they are dropped, not queued for sending at a future time.
.1.3.6.1.2.1.138.0.12,ISIS-MIB::isisAreaMismatch,,,,,,A notification sent when we receive a Hello PDU from an IS that does not share any area address. This notification includes the header of the packet, which may help a network manager identify the source of the confusion. The agent must throttle the generation of consecutive isisAreaMismatch notifications so that there is at least a 5-second gap between notifications of this type. When notifications are throttled, they are dropped, not queued for sending at a future time.
.1.3.6.1.2.1.138.0.13,ISIS-MIB::isisRejectedAdjacency,,,,,,A notification sent when we receive a Hello PDU from an IS but do not establish an adjacency for some reason. The agent must throttle the generation of consecutive isisRejectedAdjacency notifications so that there is at least a 5-second gap between notifications of this type. When notifications are throttled, they are dropped, not queued for sending at a future time.
.1.3.6.1.2.1.138.0.14,ISIS-MIB::isisLSPTooLargeToPropagate,,,,,,A notification sent when we attempt to propagate an LSP that is larger than the dataLinkBlockSize for the circuit. The agent must throttle the generation of consecutive isisLSPTooLargeToPropagate notifications so that there is at least a 5-second gap between notifications of this type. When notifications are throttled, they are dropped, not queued for sending at a future time.
.1.3.6.1.2.1.138.0.15,ISIS-MIB::isisOrigLSPBuffSizeMismatch,,,,,,A notification sent when a Level 1 LSP or Level 2 LSP is received that is larger than the local value for isisSysLevelOrigLSPBuffSize, or when an LSP is received that contains the supported Buffer Size option and the value in the PDU option field does not match the local value for isisSysLevelOrigLSPBuffSize. We pass up the size from the option field and the size of the LSP when one of them exceeds our configuration. The agent must throttle the generation of consecutive isisOrigLSPBuffSizeMismatch notifications so that there is at least a 5-second gap between notifications of this type. When notifications are throttled, they are dropped, not queued for sending at a future time.
.1.3.6.1.2.1.138.0.16,ISIS-MIB::isisProtocolsSupportedMismatch,,,,,,A notification sent when a non-pseudonode segment 0 LSP is received that has no matching protocols supported. This may be because the system does not generate the field, or because there are no common elements. The list of protocols supported should be included in the notification: it may be empty if the TLV is not supported, or if the TLV is empty. The agent must throttle the generation of consecutive isisProtocolsSupportedMismatch notifications so that there is at least a 5-second gap between notifications of this type. When notifications are throttled, they are dropped, not queued for sending at a future time.
.1.3.6.1.2.1.138.0.17,ISIS-MIB::isisAdjacencyChange,,,,,,A notification sent when an adjacency changes state, entering or leaving state up. The first 6 bytes of the isisPduLspId are the SystemID of the adjacent IS. The isisAdjState is the new state of the adjacency.
.1.3.6.1.2.1.138.0.18,ISIS-MIB::isisLSPErrorDetected,,,,,,This notification is generated when we receive an LSP with a parse error. The isisCircIfIndex holds an index of the circuit on which the PDU arrived. The isisPduFragment holds the start of the LSP, and the isisErrorOffset points to the problem. If the problem is a malformed TLV, isisErrorOffset points to the start of the TLV, and isisErrorTLVType holds the value of the type. If the problem is with the LSP header, isisErrorOffset points to the suspicious byte. The number of such LSPs is accumulated in isisSysStatLSPErrors.
.1.3.6.1.2.1.138.1,ISIS-MIB::isisObjects,,,,,,
.1.3.6.1.2.1.138.1.1,ISIS-MIB::isisSystem,,,,,,
.1.3.6.1.2.1.138.1.1.1,ISIS-MIB::isisSysObject,,,,,,
.1.3.6.1.2.1.138.1.1.1.1,ISIS-MIB::isisSysVersion,INTEGER,read-only,,current,unknown(0):one(1),The version number of the IS-IS protocol that is implemented.
.1.3.6.1.2.1.138.1.1.1.2,ISIS-MIB::isisSysLevelType,INTEGER,read-write,,current,level1(1):level2(2):level1and2(3),At which levels is the Intermediate System running? This object may not be modified when the isisSysAdminState variable is in state 'on' for this Intermediate System. Configured values MUST survive an agent reboot.
.1.3.6.1.2.1.138.1.1.1.3,ISIS-MIB::isisSysID,OCTET,read-write,,current,,The ID for this Intermediate System. This value is appended to each of the area addresses to form the Network Entity Titles. The derivation of a value for this object is implementation specific. Some implementations may automatically assign values and not permit an SNMP write, while others may require the value to be set manually. Configured values MUST survive an agent reboot.
.1.3.6.1.2.1.138.1.1.1.4,ISIS-MIB::isisSysMaxPathSplits,Unsigned32,read-write,,current,,Maximum number of paths with equal routing metric value which it is permitted to split between. This object may not be modified when the isisSysAdminState variable is in state 'on' for this Intermediate System. Configured values MUST survive an agent reboot.
.1.3.6.1.2.1.138.1.1.1.5,ISIS-MIB::isisSysMaxLSPGenInt,Unsigned32,read-write,,current,,Maximum interval, in seconds, between generated LSPs by this Intermediate System. This object follows the ResettingTimer behavior. The value must be greater than any value configured for isisSysLevelMinLSPGenInt, and should be at least 300 seconds less than isisSysMaxAge. Configured values MUST survive an agent reboot.
.1.3.6.1.2.1.138.1.1.1.6,ISIS-MIB::isisSysPollESHelloRate,Unsigned32,read-write,,current,,The value, in seconds, to be used for the suggested ES configuration timer in ISH PDUs when soliciting the ES configuration. Configured values MUST survive an agent reboot.
.1.3.6.1.2.1.138.1.1.1.7,ISIS-MIB::isisSysWaitTime,Unsigned32,read-write,,current,,Number of seconds to delay in state 'waiting' before entering the state 'on'. This object follows the ResettingTimer behavior. Configured values MUST survive an agent reboot.
.1.3.6.1.2.1.138.1.1.1.8,ISIS-MIB::isisSysAdminState,INTEGER,read-write,,current,on(1):off(2),The administrative state of this Intermediate System. Setting this object to the value 'on' when its current value is 'off' enables the Intermediate System. Configured values MUST survive an agent reboot.
.1.3.6.1.2.1.138.1.1.1.9,ISIS-MIB::isisSysL2toL1Leaking,INTEGER,read-write,,current,true(1):false(2),If true, allow the router to leak L2 routes into L1. Configured values MUST survive an agent reboot.
.1.3.6.1.2.1.138.1.1.1.10,ISIS-MIB::isisSysMaxAge,Unsigned32,read-write,,current,,Value to place in RemainingLifeTime field of the LSPs we generate. This should be at least 300 seconds greater than isisSysMaxLSPGenInt. Configured values MUST survive an agent reboot.
.1.3.6.1.2.1.138.1.1.1.11,ISIS-MIB::isisSysReceiveLSPBufferSize,Unsigned32,read-write,,current,,Size of the largest buffer we are designed or configured to store. This should be at least as big as the maximum isisSysLevelOrigLSPBuffSize supported by the system. If resources allow, we will store and flood LSPs larger than isisSysReceiveLSPBufferSize, as this can help avoid problems in networks with different values for isisSysLevelOrigLSPBuffSize. Configured values MUST survive an agent reboot.
.1.3.6.1.2.1.138.1.1.1.12,ISIS-MIB::isisSysProtSupported,BITS,read-only,,current,iso8473(0):ipv4(1):ipv6(2),This attribute contains the set of protocols supported by this Intermediate System.
.1.3.6.1.2.1.138.1.1.1.13,ISIS-MIB::isisSysNotificationEnable,INTEGER,read-write,,current,true(1):false(2),If this object is set to true(1), then it enables the emission of IS-IS Notifications. If it is set to false(2), these notifications are not sent. Configured values MUST survive an agent reboot.
.1.3.6.1.2.1.138.1.1.2,ISIS-MIB::isisManAreaAddrTable,,not-accessible,,current,,The set of manual area addresses configured on this Intermediate System. At least one row in which the value of isisManAreaAddrExistState is active must be present. The maximum number of rows in this table for which the object isisManAreaAddrExistState has the value active is 3. An attempt to create more than 3 rows of isisManAreaAddrEntry with state 'active' in one instance of the IS-IS protocol should return inconsistentValue.
.1.3.6.1.2.1.138.1.1.2.1,ISIS-MIB::isisManAreaAddrEntry,,not-accessible,isisManAreaAddr,current,,Each entry contains one area address manually configured on this system. Dynamically created rows MUST survive an agent reboot.
.1.3.6.1.2.1.138.1.1.2.1.1,ISIS-MIB::isisManAreaAddr,OCTET,not-accessible,,current,,A manually configured area address for this system. Note: An index for the entry {1, {49.0001} active} in this table would be the ordered pair (1, (0x03 0x49 0x00 0x01)), as the length of an octet string is part of the OID.
.1.3.6.1.2.1.138.1.1.2.1.2,ISIS-MIB::isisManAreaAddrExistState,INTEGER,read-create,,current,active(1):notInService(2):notReady(3):createAndGo(4):createAndWait(5):destroy(6),The state of the isisManAreaAddrEntry. If the isisSysAdminState for this Intermediate System is 'on' and an attempt is made to set this object to the value 'destroy' or 'notInService' when this is the only isisManAreaAddrEntry in state 'active' for this Intermediate System should return inconsistentValue. A row entry cannot be modified when the value of this object is 'active'.
.1.3.6.1.2.1.138.1.1.3,ISIS-MIB::isisAreaAddrTable,,not-accessible,,current,,The union of the sets of area addresses reported in all Level 1 LSPs with fragment number zero generated by this Intermediate System, or received from other Intermediate Systems that are reachable via Level 1 routing.
.1.3.6.1.2.1.138.1.1.3.1,ISIS-MIB::isisAreaAddrEntry,,not-accessible,isisAreaAddr,current,,Each entry contains one area address reported in a Level 1 LSP generated or received by this Intermediate System. Dynamically learned rows do not survive an agent reboot.
.1.3.6.1.2.1.138.1.1.3.1.1,ISIS-MIB::isisAreaAddr,OCTET,read-only,,current,,An area address reported in a Level 1 LSP.
.1.3.6.1.2.1.138.1.1.4,ISIS-MIB::isisSummAddrTable,,not-accessible,,current,,The set of IP summary addresses to use in forming summary TLVs originated by this Intermediate System. An administrator may use a summary address to combine and modify IP Reachability announcements. If the Intermediate system can reach any subset of the summary address, the summary address MUST be announced instead, at the configured metric.
.1.3.6.1.2.1.138.1.1.4.1,ISIS-MIB::isisSummAddrEntry,,not-accessible,isisSummAddressType:isisSummAddress:isisSummAddrPrefixLen,current,,Each entry contains one IP summary address. Dynamically created rows MUST survive an agent reboot. Implementers need to be aware that if the total number of elements (octets or sub-identifiers) in isisSummAddress and isisSummAddrPrefixLen is too great, then OIDs of column instances in this table will have more than 128 subidentifiers and cannot be accessed using SNMPv1, SNMPv2c, or SNMPv3.
.1.3.6.1.2.1.138.1.1.4.1.1,ISIS-MIB::isisSummAddressType,INTEGER,not-accessible,,current,unknown(0):ipv4(1):ipv6(2):ipv4z(3):ipv6z(4):dns(16),The Type of IP address for this summary address.
.1.3.6.1.2.1.138.1.1.4.1.2,ISIS-MIB::isisSummAddress,OCTET,not-accessible,,current,,The IP Address value for this summary address. The address must not contain any set host bits (bits set after the address prefix determined by isisSummAddrPrefixLen). The type of this address is determined by the value of the isisSummAddressType object.
.1.3.6.1.2.1.138.1.1.4.1.3,ISIS-MIB::isisSummAddrPrefixLen,Unsigned32,not-accessible,,current,,The Length of the IP NetMask for this summary address. The values for the index objects isisSummAddress and isisSummAddrPrefixLen must be consistent. When the value of isisSummAddress (excluding the zone index, if one is present) is x, then the bitwise logical-AND of x with the value of the mask formed from the corresponding index object isisSummAddrPrefixLen MUST be equal to x. If not, then the index pair is not consistent, and an inconsistentName error must be returned on SET or CREATE requests.
.1.3.6.1.2.1.138.1.1.4.1.4,ISIS-MIB::isisSummAddrExistState,INTEGER,read-create,,current,active(1):notInService(2):notReady(3):createAndGo(4):createAndWait(5):destroy(6),The existence state of this summary address. Support for 'createAndWait' and 'notInService' is not required. A row entry cannot be modified when the value of this object is 'active'.
.1.3.6.1.2.1.138.1.1.4.1.5,ISIS-MIB::isisSummAddrMetric,Unsigned32,read-create,,current,,The metric value to announce this summary address within LSPs generated by this system.
.1.3.6.1.2.1.138.1.1.4.1.6,ISIS-MIB::isisSummAddrFullMetric,Unsigned32,read-create,,current,,The wide metric value to announce this summary address within LSPs generated by this system.
.1.3.6.1.2.1.138.1.1.5,ISIS-MIB::isisRedistributeAddrTable,,not-accessible,,current,,This table provides criteria to decide if a route should be leaked from L2 to L1 when Domain Wide Prefix leaking is enabled. Addresses that match the summary mask in the table MUST be announced at L1 by routers when isisSysL2toL1Leaking is enabled. Routes that fall into the ranges specified are announced as is, without being summarized. Routes that do not match a summary mask are not announced.
.1.3.6.1.2.1.138.1.1.5.1,ISIS-MIB::isisRedistributeAddrEntry,,not-accessible,isisRedistributeAddrType:isisRedistributeAddrAddress:isisRedistributeAddrPrefixLen,current,,Each entry contains one configured IP summary address to manage leaking L2 addresses into L1. Dynamically created rows MUST survive an agent reboot. Implementers need to be aware that if the total number of elements (octets or sub-identifiers) in isisRedistributeAddrAddress and isisRedistributeAddrPrefixLen is too great, then OIDs of column instances in this table will have more than 128 subidentifiers and cannot be accessed using SNMPv1, SNMPv2c, or SNMPv3.
.1.3.6.1.2.1.138.1.1.5.1.1,ISIS-MIB::isisRedistributeAddrType,INTEGER,not-accessible,,current,unknown(0):ipv4(1):ipv6(2):ipv4z(3):ipv6z(4):dns(16),The Type of IP address for this summary address.
.1.3.6.1.2.1.138.1.1.5.1.2,ISIS-MIB::isisRedistributeAddrAddress,OCTET,not-accessible,,current,,The IP Address value for this summary address. The type of this address is determined by the value of the isisRedistributeAddrType object. The address must not contain any set host bits - bits set after the address prefix determined by isisRedistributeAddrPrefixLen.
.1.3.6.1.2.1.138.1.1.5.1.3,ISIS-MIB::isisRedistributeAddrPrefixLen,Unsigned32,not-accessible,,current,,The Length of the IP NetMask for this summary address. The values for the index objects isisRedistributeAddrAddress and isisRedistributeAddrPrefixLen must be consistent. When the value of isisRedistributeAddrAddress (excluding the zone index, if one is present) is x, then the bitwise logical-AND of x with the value of the mask formed from the corresponding index object isisRedistributeAddrPrefixLen MUST be equal to x. If not, then the index pair is not consistent, and an inconsistentName error must be returned on SET or CREATE requests.
.1.3.6.1.2.1.138.1.1.5.1.4,ISIS-MIB::isisRedistributeAddrExistState,INTEGER,read-create,,current,active(1):notInService(2):notReady(3):createAndGo(4):createAndWait(5):destroy(6),The existence state of this summary address. Support for createAndWait and notInService is not required. A row entry cannot be modified when the value of this object is 'active'.
.1.3.6.1.2.1.138.1.1.6,ISIS-MIB::isisRouterTable,,not-accessible,,current,,The set of hostnames and router ID.
.1.3.6.1.2.1.138.1.1.6.1,ISIS-MIB::isisRouterEntry,,not-accessible,isisRouterSysID:isisRouterLevel,current,,Each entry tracks information about one Intermediate System at one level. Dynamically learned rows do not survive an agent reboot.
.1.3.6.1.2.1.138.1.1.6.1.1,ISIS-MIB::isisRouterSysID,OCTET,not-accessible,,current,,The System ID of the Intermediate System.
.1.3.6.1.2.1.138.1.1.6.1.2,ISIS-MIB::isisRouterLevel,INTEGER,not-accessible,,current,area(1):domain(2),The level at which the information about this Intermediate System was received.
.1.3.6.1.2.1.138.1.1.6.1.3,ISIS-MIB::isisRouterHostName,OCTET,read-only,,current,,The hostname listed in the LSP, or a zero-length string if none.
.1.3.6.1.2.1.138.1.1.6.1.4,ISIS-MIB::isisRouterID,Unsigned32,read-only,,current,,The Router ID found in the LSP, or zero if none.
.1.3.6.1.2.1.138.1.2,ISIS-MIB::isisSysLevel,,,,,,
.1.3.6.1.2.1.138.1.2.1,ISIS-MIB::isisSysLevelTable,,not-accessible,,current,,Level specific information about the System.
.1.3.6.1.2.1.138.1.2.1.1,ISIS-MIB::isisSysLevelEntry,,not-accessible,isisSysLevelIndex,current,,Each row describes variables configured for Area or Domain. Configured values MUST survive an agent reboot.
.1.3.6.1.2.1.138.1.2.1.1.1,ISIS-MIB::isisSysLevelIndex,INTEGER,not-accessible,,current,area(1):domain(2),The level that this entry describes.
.1.3.6.1.2.1.138.1.2.1.1.2,ISIS-MIB::isisSysLevelOrigLSPBuffSize,Unsigned32,read-write,,current,,The maximum size of LSPs and SNPs originated by this Intermediate System at this level. This object may not be modified when the isisSysAdminState variable is in state 'on' for this Intermediate System.
.1.3.6.1.2.1.138.1.2.1.1.3,ISIS-MIB::isisSysLevelMinLSPGenInt,Unsigned32,read-write,,current,,Minimum interval, in seconds, between successive generation of LSPs with the same LSPID at this level by this Intermediate System.
.1.3.6.1.2.1.138.1.2.1.1.4,ISIS-MIB::isisSysLevelState,INTEGER,read-only,,current,off(1):on(2):waiting(3):overloaded(4),The state of the database at this level. The value 'off' indicates that IS-IS is not active at this level. The value 'on' indicates that IS-IS is active at this level and is not overloaded. The value 'waiting' indicates a database that is low on an essential resource, such as memory. The administrator may force the state to 'overloaded' by setting the object isisSysLevelSetOverload. If the state is 'waiting' or 'overloaded', we originate LSPs with the overload bit set.
.1.3.6.1.2.1.138.1.2.1.1.5,ISIS-MIB::isisSysLevelSetOverload,INTEGER,read-write,,current,true(1):false(2),Administratively set the overload bit for the level. The overload bit MUST continue to be set if the implementation runs out of memory, independent of this variable. It may also be set manually independent of this variable, using the isisSysLevelSetOverloadUntil object.
.1.3.6.1.2.1.138.1.2.1.1.6,ISIS-MIB::isisSysLevelSetOverloadUntil,Unsigned32,read-write,,current,,If this object is non-zero, the overload bit is set at this level when the isisSysAdminState variable goes to state 'on' for this Intermediate System. The overload bit remains set for isisSysLevelSetOverloadUntil seconds. When isisSysLevelSetOverloadUntil seconds have elapsed, the overload flag remains set if the implementation has run out of memory, or if it is set manually using the isisSysLevelSetOverload object. If isisSysLevelSetOverload is false, the system clears the overload bit when isisSysLevelSetOverloadUntil seconds have elapsed, if the system has not run out of memory.
.1.3.6.1.2.1.138.1.2.1.1.7,ISIS-MIB::isisSysLevelMetricStyle,INTEGER,read-write,,current,narrow(1):wide(2):both(3),Which style of metric do we generate in our LSPs at this level?
.1.3.6.1.2.1.138.1.2.1.1.8,ISIS-MIB::isisSysLevelSPFConsiders,INTEGER,read-write,,current,narrow(1):wide(2):both(3),Which style of metric do we consider in our SPF computation at this level?
.1.3.6.1.2.1.138.1.2.1.1.9,ISIS-MIB::isisSysLevelTEEnabled,INTEGER,read-write,,current,true(1):false(2),Do we do Traffic Engineering at this level?
.1.3.6.1.2.1.138.1.3,ISIS-MIB::isisCirc,,,,,,
.1.3.6.1.2.1.138.1.3.1,ISIS-MIB::isisNextCircIndex,Unsigned32,read-only,,current,,This object is used to assist a management application in creating new rows in the isisCircTable. If it is possible to create a new instance of isisCircEntry, then this object will contain a non-zero value that is not in use as the index of any row in the isisCircTable. The network manager reads the value of this object and then (if the value read is non-zero) attempts to create the corresponding instance of isisCircEntry. If the set request fails with the code 'inconsistentValue', then the process must be repeated; if the set request succeeds, then the agent will change the value of this object according to an implementation-specific algorithm.
.1.3.6.1.2.1.138.1.3.2,ISIS-MIB::isisCircTable,,not-accessible,,current,,The table of circuits used by this Intermediate System.
.1.3.6.1.2.1.138.1.3.2.1,ISIS-MIB::isisCircEntry,,not-accessible,isisCircIndex,current,,An isisCircEntry exists for each circuit configured for Integrated IS-IS on this system. Dynamically created rows MUST survive an agent reboot.
.1.3.6.1.2.1.138.1.3.2.1.1,ISIS-MIB::isisCircIndex,Unsigned32,not-accessible,,current,,An index used to uniquely identify this circuit. When creating a row in this table, the isisNextCircIndex object should be retrieved, and its value should be specified as the value of this index using a SET operation. A retrieved value of zero(0) indicates that no rows can be created at this time.
.1.3.6.1.2.1.138.1.3.2.1.2,ISIS-MIB::isisCircIfIndex,Integer32,read-create,,current,,The value of ifIndex for the interface to which this circuit corresponds. This object cannot be modified after creation.
.1.3.6.1.2.1.138.1.3.2.1.3,ISIS-MIB::isisCircAdminState,INTEGER,read-create,,current,on(1):off(2),The administrative state of the circuit.
.1.3.6.1.2.1.138.1.3.2.1.4,ISIS-MIB::isisCircExistState,INTEGER,read-create,,current,active(1):notInService(2):notReady(3):createAndGo(4):createAndWait(5):destroy(6),The existence state of this circuit. Setting the state to 'notInService' halts the generation and processing of IS-IS protocol PDUs on this circuit. Setting the state to destroy will also erase any configuration associated with the circuit. Support for 'createAndWait' and 'notInService' is not required. A row entry cannot be modified when the value of this object is 'active'.
.1.3.6.1.2.1.138.1.3.2.1.5,ISIS-MIB::isisCircType,INTEGER,read-create,,current,broadcast(1):ptToPt(2):staticIn(3):staticOut(4):dA(5),The type of the circuit. This object follows the ReplaceOnlyWhileDisabled behavior. The type specified must be compatible with the type of the interface defined by the value of isisCircIfIndex.
.1.3.6.1.2.1.138.1.3.2.1.6,ISIS-MIB::isisCircExtDomain,INTEGER,read-create,,current,true(1):false(2),If true, suppress normal transmission of and interpretation of Intra-domain IS-IS PDUs on this circuit.
.1.3.6.1.2.1.138.1.3.2.1.7,ISIS-MIB::isisCircLevelType,INTEGER,read-create,,current,level1(1):level2(2):level1and2(3),Indicates which type of packets will be sent and accepted on this circuit. The values set will be saved, but the values used will be modified by the settings of isisSysLevelType. Thus, if the isisSysTpe is level2 and the isisCircLevelType for a circuit is level1, the circuit will not send or receive IS-IS packets. This object follows the ReplaceOnlyWhileDisabled behavior.
.1.3.6.1.2.1.138.1.3.2.1.8,ISIS-MIB::isisCircPassiveCircuit,INTEGER,read-create,,current,true(1):false(2),Should we include this interface in LSPs, even if it is not running the IS-IS Protocol?
.1.3.6.1.2.1.138.1.3.2.1.9,ISIS-MIB::isisCircMeshGroupEnabled,INTEGER,read-create,,current,inactive(1):blocked(2):set(3),Is this port a member of a mesh group, or is it blocked? Circuits in the same mesh group act as a virtual multiaccess network. LSPs seen on one circuit in a mesh group will not be flooded to another circuit in the same mesh group.
.1.3.6.1.2.1.138.1.3.2.1.10,ISIS-MIB::isisCircMeshGroup,Unsigned32,read-create,,current,,Circuits in the same mesh group act as a virtual multiaccess network. LSPs seen on one circuit in a mesh group will not be flooded to another circuit in the same mesh group. If isisCircMeshGroupEnabled is inactive or blocked, this value is ignored.
.1.3.6.1.2.1.138.1.3.2.1.11,ISIS-MIB::isisCircSmallHellos,INTEGER,read-create,,current,true(1):false(2),Can we send unpadded hellos on LAN circuits? False means the LAN Hellos must be padded. Implementations should allow the administrator to read this value. An implementation need not be able to support unpadded hellos to be conformant.
.1.3.6.1.2.1.138.1.3.2.1.12,ISIS-MIB::isisCircLastUpTime,TimeTicks,read-only,,current,,How long the circuit has been enabled, measured in hundredths of seconds since the last re-initialization of the network management subsystem; 0 if the circuit has never been 'on'.
.1.3.6.1.2.1.138.1.3.2.1.13,ISIS-MIB::isisCirc3WayEnabled,INTEGER,read-create,,current,true(1):false(2),Is this circuit enabled to run 3Way handshake?
.1.3.6.1.2.1.138.1.3.2.1.14,ISIS-MIB::isisCircExtendedCircID,Unsigned32,read-create,,current,,The value to be used as the extended circuit ID in 3Way handshake. This value is only used if isisCirc3WayEnabled is true, and it must be unique across all circuits on this IS.
.1.3.6.1.2.1.138.1.4,ISIS-MIB::isisCircLevelValues,,,,,,
.1.3.6.1.2.1.138.1.4.1,ISIS-MIB::isisCircLevelTable,,not-accessible,,current,,Level specific information about circuits used by IS-IS.
.1.3.6.1.2.1.138.1.4.1.1,ISIS-MIB::isisCircLevelEntry,,not-accessible,isisCircIndex:isisCircLevelIndex,current,,An isisCircLevelEntry exists for each level on each circuit configured for Integrated IS-IS on this system. Configured values MUST survive an agent reboot.
.1.3.6.1.2.1.138.1.4.1.1.1,ISIS-MIB::isisCircLevelIndex,INTEGER,not-accessible,,current,area(1):domain(2),The level that this entry describes.
.1.3.6.1.2.1.138.1.4.1.1.2,ISIS-MIB::isisCircLevelMetric,Unsigned32,read-write,,current,,The metric value of this circuit for this level.
.1.3.6.1.2.1.138.1.4.1.1.3,ISIS-MIB::isisCircLevelWideMetric,Unsigned32,read-write,,current,,The wide metric value of this circuit for this level.
.1.3.6.1.2.1.138.1.4.1.1.4,ISIS-MIB::isisCircLevelISPriority,Unsigned32,read-write,,current,,The priority for becoming the LAN-Designated Intermediate System at this level.
.1.3.6.1.2.1.138.1.4.1.1.5,ISIS-MIB::isisCircLevelIDOctet,Unsigned32,read-only,,current,,A one-byte identifier for the circuit selected by the Intermediate System. On point-to-point circuits, the value is used as the Local Circuit ID in point-to-point IIH PDUs transmitted on this circuit. In this case, values of isisCircLevelIDOctet do not need to be unique. For broadcast circuits, the value is used to generate the LAN ID that will be used if this Intermediate System is elected as the Designated IS on this circuit. The value is required to differ on LANs where the Intermediate System is the Designated Intermediate System.
.1.3.6.1.2.1.138.1.4.1.1.6,ISIS-MIB::isisCircLevelID,OCTET,read-only,,current,,On a point-to-point circuit with a fully initialized adjacency to a peer IS, the value of this object is the circuit ID negotiated during adjacency initialization. On a point to point circuit without such an adjacency, the value is the concatenation of the local system ID and the one-byte isisCircLevelIDOctet for this circuit, i.e., the value that would be proposed for the circuit ID. On other circuit types, the value returned is the zero- length OCTET STRING.
.1.3.6.1.2.1.138.1.4.1.1.7,ISIS-MIB::isisCircLevelDesIS,OCTET,read-only,,current,,The ID of the LAN-Designated Intermediate System on this circuit at this level. If, for any reason, this system is not partaking in the relevant Designated Intermediate System election process, then the value returned is the zero-length OCTET STRING.
.1.3.6.1.2.1.138.1.4.1.1.8,ISIS-MIB::isisCircLevelHelloMultiplier,Unsigned32,read-write,,current,,This value is multiplied by the corresponding HelloTimer, and the result in seconds (rounded up) is used as the holding time in transmitted hellos, to be used by receivers of hello packets from this IS.
.1.3.6.1.2.1.138.1.4.1.1.9,ISIS-MIB::isisCircLevelHelloTimer,Unsigned32,read-write,,current,,Maximum period, in milliseconds, between IIH PDUs on multiaccess networks at this level for LANs. The value at L1 is used as the period between Hellos on L1L2 point-to-point circuits. Setting this value at level 2 on an L1L2 point-to-point circuit will result in an error of InconsistentValue. This object follows the ResettingTimer behavior.
.1.3.6.1.2.1.138.1.4.1.1.10,ISIS-MIB::isisCircLevelDRHelloTimer,Unsigned32,read-write,,current,,Period, in milliseconds, between Hello PDUs on multiaccess networks when this IS is the Designated Intermediate System. This object follows the ResettingTimer behavior.
.1.3.6.1.2.1.138.1.4.1.1.11,ISIS-MIB::isisCircLevelLSPThrottle,Unsigned32,read-write,,current,,Minimal interval of time, in milliseconds, between transmissions of LSPs on an interface at this level.
.1.3.6.1.2.1.138.1.4.1.1.12,ISIS-MIB::isisCircLevelMinLSPRetransInt,Unsigned32,read-write,,current,,Minimum interval, in seconds, between re-transmission of an LSP at this level. This object follows the ResettingTimer behavior. Note that isisCircLevelLSPThrottle controls how fast we send back-to-back LSPs. This variable controls how fast we re-send the same LSP.
.1.3.6.1.2.1.138.1.4.1.1.13,ISIS-MIB::isisCircLevelCSNPInterval,Unsigned32,read-write,,current,,Interval of time, in seconds, between periodic transmission of a complete set of CSNPs on multiaccess networks if this router is the designated router at this level. This object follows the ResettingTimer behavior.
.1.3.6.1.2.1.138.1.4.1.1.14,ISIS-MIB::isisCircLevelPartSNPInterval,Unsigned32,read-write,,current,,Minimum interval, in seconds, between sending Partial Sequence Number PDUs at this level. This object follows the ResettingTimer behavior.
.1.3.6.1.2.1.138.1.5,ISIS-MIB::isisCounters,,,,,,
.1.3.6.1.2.1.138.1.5.1,ISIS-MIB::isisSystemCounterTable,,not-accessible,,current,,System-wide counters for this Intermediate System.
.1.3.6.1.2.1.138.1.5.1.1,ISIS-MIB::isisSystemCounterEntry,,not-accessible,isisSysStatLevel,current,,System-wide IS-IS counters.
.1.3.6.1.2.1.138.1.5.1.1.1,ISIS-MIB::isisSysStatLevel,INTEGER,not-accessible,,current,area(1):domain(2),The level that this entry describes.
.1.3.6.1.2.1.138.1.5.1.1.2,ISIS-MIB::isisSysStatCorrLSPs,Counter32,read-only,,current,,Number of corrupted in-memory LSPs detected. LSPs received from the wire with a bad checksum are silently dropped and are not counted. LSPs received from the wire with parse errors are counted by isisSysStatLSPErrors.
.1.3.6.1.2.1.138.1.5.1.1.3,ISIS-MIB::isisSysStatAuthTypeFails,Counter32,read-only,,current,,The number of authentication type mismatches recognized by this Intermediate System.
.1.3.6.1.2.1.138.1.5.1.1.4,ISIS-MIB::isisSysStatAuthFails,Counter32,read-only,,current,,The number of authentication key failures recognized by this Intermediate System.
.1.3.6.1.2.1.138.1.5.1.1.5,ISIS-MIB::isisSysStatLSPDbaseOloads,Counter32,read-only,,current,,Number of times the LSP database has become overloaded.
.1.3.6.1.2.1.138.1.5.1.1.6,ISIS-MIB::isisSysStatManAddrDropFromAreas,Counter32,read-only,,current,,Number of times a manual address has been dropped from the area.
.1.3.6.1.2.1.138.1.5.1.1.7,ISIS-MIB::isisSysStatAttmptToExMaxSeqNums,Counter32,read-only,,current,,Number of times the IS has attempted to exceed the maximum sequence number.
.1.3.6.1.2.1.138.1.5.1.1.8,ISIS-MIB::isisSysStatSeqNumSkips,Counter32,read-only,,current,,Number of times a sequence number skip has occurred.
.1.3.6.1.2.1.138.1.5.1.1.9,ISIS-MIB::isisSysStatOwnLSPPurges,Counter32,read-only,,current,,Number of times a zero-aged copy of the system's own LSP is received from some other node.
.1.3.6.1.2.1.138.1.5.1.1.10,ISIS-MIB::isisSysStatIDFieldLenMismatches,Counter32,read-only,,current,,Number of times a PDU is received with a different value for ID field length from that of the receiving system.
.1.3.6.1.2.1.138.1.5.1.1.11,ISIS-MIB::isisSysStatPartChanges,Counter32,read-only,,current,,Partition changes.
.1.3.6.1.2.1.138.1.5.1.1.12,ISIS-MIB::isisSysStatSPFRuns,Counter32,read-only,,current,,Number of times we ran SPF at this level.
.1.3.6.1.2.1.138.1.5.1.1.13,ISIS-MIB::isisSysStatLSPErrors,Counter32,read-only,,current,,Number of LSPs with errors we have received.
.1.3.6.1.2.1.138.1.5.2,ISIS-MIB::isisCircuitCounterTable,,not-accessible,,current,,Circuit specific counters for this Intermediate System.
.1.3.6.1.2.1.138.1.5.2.1,ISIS-MIB::isisCircuitCounterEntry,,not-accessible,isisCircIndex:isisCircuitType,current,,An isisCircuitCounterEntry exists for each circuit used by Integrated IS-IS on this system.
.1.3.6.1.2.1.138.1.5.2.1.1,ISIS-MIB::isisCircuitType,INTEGER,not-accessible,,current,lanlevel1(1):lanlevel2(2):p2pcircuit(3),What type of circuit saw these counts? The point-to-point Hello PDU includes both L1 and L2, and ISs form a single adjacency on point-to-point links. Thus, we combine counts on point-to-point links into one group.
.1.3.6.1.2.1.138.1.5.2.1.2,ISIS-MIB::isisCircAdjChanges,Counter32,read-only,,current,,The number of times an adjacency state change has occurred on this circuit.
.1.3.6.1.2.1.138.1.5.2.1.3,ISIS-MIB::isisCircNumAdj,Unsigned32,read-only,,current,,The number of adjacencies on this circuit.
.1.3.6.1.2.1.138.1.5.2.1.4,ISIS-MIB::isisCircInitFails,Counter32,read-only,,current,,The number of times initialization of this circuit has failed. This counts events such as PPP NCP failures. Failures to form an adjacency are counted by isisCircRejAdjs.
.1.3.6.1.2.1.138.1.5.2.1.5,ISIS-MIB::isisCircRejAdjs,Counter32,read-only,,current,,The number of times an adjacency has been rejected on this circuit.
.1.3.6.1.2.1.138.1.5.2.1.6,ISIS-MIB::isisCircIDFieldLenMismatches,Counter32,read-only,,current,,The number of times an IS-IS control PDU with an ID field length different from that for this system has been received.
.1.3.6.1.2.1.138.1.5.2.1.7,ISIS-MIB::isisCircMaxAreaAddrMismatches,Counter32,read-only,,current,,The number of times an IS-IS control PDU with a max area address field different from that for this system has been received.
.1.3.6.1.2.1.138.1.5.2.1.8,ISIS-MIB::isisCircAuthTypeFails,Counter32,read-only,,current,,The number of times an IS-IS control PDU with an auth type field different from that for this system has been received.
.1.3.6.1.2.1.138.1.5.2.1.9,ISIS-MIB::isisCircAuthFails,Counter32,read-only,,current,,The number of times an IS-IS control PDU with the correct auth type has failed to pass authentication validation.
.1.3.6.1.2.1.138.1.5.2.1.10,ISIS-MIB::isisCircLANDesISChanges,Counter32,read-only,,current,,The number of times the Designated IS has changed on this circuit at this level. If the circuit is point to point, this count is zero.
.1.3.6.1.2.1.138.1.5.3,ISIS-MIB::isisPacketCounterTable,,not-accessible,,current,,Information about IS-IS protocol traffic at one level, on one circuit, in one direction.
.1.3.6.1.2.1.138.1.5.3.1,ISIS-MIB::isisPacketCounterEntry,,not-accessible,isisCircIndex:isisPacketCountLevel:isisPacketCountDirection,current,,Information about IS-IS protocol traffic at one level, on one circuit, in one direction.
.1.3.6.1.2.1.138.1.5.3.1.1,ISIS-MIB::isisPacketCountLevel,INTEGER,not-accessible,,current,area(1):domain(2),The level at which these PDU counts have been collected.
.1.3.6.1.2.1.138.1.5.3.1.2,ISIS-MIB::isisPacketCountDirection,INTEGER,not-accessible,,current,sending(1):receiving(2),Were we sending or receiving these PDUs?
.1.3.6.1.2.1.138.1.5.3.1.3,ISIS-MIB::isisPacketCountIIHello,Counter32,read-only,,current,, at this levelThe number of IS-IS Hello PDUs seen in this direction at this level. Point-to-Point IIH PDUs are counted at the lowest enabled level: at L1 on L1 or L1L2 circuits, and at L2 otherwise.
.1.3.6.1.2.1.138.1.5.3.1.4,ISIS-MIB::isisPacketCountISHello,Counter32,read-only,,current,, this level.The number of ES-IS Hello PDUs seen in this direction. ISH PDUs are counted at the lowest enabled level: at L1 on L1 or L1L2 circuits, and at L2 otherwise.
.1.3.6.1.2.1.138.1.5.3.1.5,ISIS-MIB::isisPacketCountESHello,Counter32,read-only,,current,, this levelThe number of ES Hello PDUs seen in this direction. ESH PDUs are counted at the lowest enabled level: at L1 on L1 or L1L2 circuits, and at L2 otherwise.
.1.3.6.1.2.1.138.1.5.3.1.6,ISIS-MIB::isisPacketCountLSP,Counter32,read-only,,current,, this levelThe number of IS-IS LSPs seen in this direction at this level.
.1.3.6.1.2.1.138.1.5.3.1.7,ISIS-MIB::isisPacketCountCSNP,Counter32,read-only,,current,, this levelThe number of IS-IS CSNPs seen in this direction at this level.
.1.3.6.1.2.1.138.1.5.3.1.8,ISIS-MIB::isisPacketCountPSNP,Counter32,read-only,,current,, this levelThe number of IS-IS PSNPs seen in this direction at this level.
.1.3.6.1.2.1.138.1.5.3.1.9,ISIS-MIB::isisPacketCountUnknown,Counter32,read-only,,current,,The number of unknown IS-IS PDUs seen at this level.
.1.3.6.1.2.1.138.1.6,ISIS-MIB::isisISAdj,,,,,,
.1.3.6.1.2.1.138.1.6.1,ISIS-MIB::isisISAdjTable,,not-accessible,,current,,The table of adjacencies to Intermediate Systems.
.1.3.6.1.2.1.138.1.6.1.1,ISIS-MIB::isisISAdjEntry,,not-accessible,isisCircIndex:isisISAdjIndex,current,,Each entry corresponds to one adjacency to an Intermediate System on this system. Dynamically learned rows do not survive an agent reboot.
.1.3.6.1.2.1.138.1.6.1.1.1,ISIS-MIB::isisISAdjIndex,Unsigned32,not-accessible,,current,,A unique value identifying the IS adjacency from all other such adjacencies on this circuit. This value is automatically assigned by the system when the adjacency is created.
.1.3.6.1.2.1.138.1.6.1.1.2,ISIS-MIB::isisISAdjState,INTEGER,read-only,,current,down(1):initializing(2):up(3):failed(4),The state of the adjacency.
.1.3.6.1.2.1.138.1.6.1.1.3,ISIS-MIB::isisISAdj3WayState,INTEGER,read-only,,current,up(0):initializing(1):down(2):failed(3),The 3Way state of the adjacency. These are picked to match the historical on-the-wire representation of the 3Way state and are not intended to match isisISAdjState.
.1.3.6.1.2.1.138.1.6.1.1.4,ISIS-MIB::isisISAdjNeighSNPAAddress,OCTET,read-only,,current,,The SNPA address of the neighboring system.
.1.3.6.1.2.1.138.1.6.1.1.5,ISIS-MIB::isisISAdjNeighSysType,INTEGER,read-only,,current,l1IntermediateSystem(1):l2IntermediateSystem(2):l1L2IntermediateSystem(3):unknown(4),The type of the neighboring system.
.1.3.6.1.2.1.138.1.6.1.1.6,ISIS-MIB::isisISAdjNeighSysID,OCTET,read-only,,current,,The system ID of the neighboring Intermediate System.
.1.3.6.1.2.1.138.1.6.1.1.7,ISIS-MIB::isisISAdjNbrExtendedCircID,Unsigned32,read-only,,current,,The 4-byte Extended Circuit ID learned from the Neighbor during 3-way handshake, or 0.
.1.3.6.1.2.1.138.1.6.1.1.8,ISIS-MIB::isisISAdjUsage,INTEGER,read-only,,current,level1(1):level2(2):level1and2(3),How is the adjacency used? On a point-to-point link, this might be level1and2, but on a LAN, the usage will be level1 on the adjacency between peers at L1, and level2 for the adjacency between peers at L2.
.1.3.6.1.2.1.138.1.6.1.1.9,ISIS-MIB::isisISAdjHoldTimer,Unsigned32,read-only,,current,,The holding time, in seconds, for this adjacency. This value is based on received IIH PDUs and the elapsed time since receipt.
.1.3.6.1.2.1.138.1.6.1.1.10,ISIS-MIB::isisISAdjNeighPriority,Unsigned32,read-only,,current,,Priority of the neighboring Intermediate System for becoming the Designated Intermediate System.
.1.3.6.1.2.1.138.1.6.1.1.11,ISIS-MIB::isisISAdjLastUpTime,TimeTicks,read-only,,current,,When the adjacency most recently entered the state 'up', measured in hundredths of a second since the last re-initialization of the network management subsystem. Holds 0 if the adjacency has never been in state 'up'.
.1.3.6.1.2.1.138.1.6.2,ISIS-MIB::isisISAdjAreaAddrTable,,not-accessible,,current,,This table contains the set of Area Addresses of neighboring Intermediate Systems as reported in received IIH PDUs.
.1.3.6.1.2.1.138.1.6.2.1,ISIS-MIB::isisISAdjAreaAddrEntry,,not-accessible,isisCircIndex:isisISAdjIndex:isisISAdjAreaAddrIndex,current,,Each entry contains one Area Address reported by a neighboring Intermediate System in its IIH PDUs. Dynamically learned rows do not survive an agent reboot.
.1.3.6.1.2.1.138.1.6.2.1.1,ISIS-MIB::isisISAdjAreaAddrIndex,Unsigned32,not-accessible,,current,,An index for the areas associated with one neighbor. This provides a simple way to walk the table.
.1.3.6.1.2.1.138.1.6.2.1.2,ISIS-MIB::isisISAdjAreaAddress,OCTET,read-only,,current,,One Area Address as reported in IIH PDUs received from the neighbor.
.1.3.6.1.2.1.138.1.6.3,ISIS-MIB::isisISAdjIPAddrTable,,not-accessible,,current,,This table contains the set of IP Addresses of neighboring Intermediate Systems as reported in received IIH PDUs.
.1.3.6.1.2.1.138.1.6.3.1,ISIS-MIB::isisISAdjIPAddrEntry,,not-accessible,isisCircIndex:isisISAdjIndex:isisISAdjIPAddrIndex,current,,Each entry contains one IP Address reported by a neighboring Intermediate System in its IIH PDUs. Dynamically learned rows do not survive an agent reboot.
.1.3.6.1.2.1.138.1.6.3.1.1,ISIS-MIB::isisISAdjIPAddrIndex,Unsigned32,not-accessible,,current,,An index to this table that identifies the IP addresses to which this entry belongs.
.1.3.6.1.2.1.138.1.6.3.1.2,ISIS-MIB::isisISAdjIPAddrType,INTEGER,read-only,,current,unknown(0):ipv4(1):ipv6(2):ipv4z(3):ipv6z(4):dns(16),The type of one IP Address as reported in IIH PDUs received from the neighbor.
.1.3.6.1.2.1.138.1.6.3.1.3,ISIS-MIB::isisISAdjIPAddrAddress,OCTET,read-only,,current,,One IP Address as reported in IIH PDUs received from the neighbor. The type of this address is determined by the value of the isisISAdjIPAddrType object.
.1.3.6.1.2.1.138.1.6.4,ISIS-MIB::isisISAdjProtSuppTable,,not-accessible,,current,,This table contains the set of protocols supported by neighboring Intermediate Systems as reported in received IIH PDUs.
.1.3.6.1.2.1.138.1.6.4.1,ISIS-MIB::isisISAdjProtSuppEntry,,not-accessible,isisCircIndex:isisISAdjIndex:isisISAdjProtSuppProtocol,current,,Each entry contains one protocol supported by a neighboring Intermediate System as reported in its IIH PDUs. Dynamically learned rows do not survive an agent reboot.
.1.3.6.1.2.1.138.1.6.4.1.1,ISIS-MIB::isisISAdjProtSuppProtocol,INTEGER,read-only,,current,iso8473(129):ipV6(142):ip(204),One supported protocol as reported in IIH PDUs received from the neighbor.
.1.3.6.1.2.1.138.1.7,ISIS-MIB::isisReachAddr,,,,,,
.1.3.6.1.2.1.138.1.7.1,ISIS-MIB::isisRATable,,not-accessible,,current,,The table of Reachable Addresses to NSAPs or Address Prefixes.
.1.3.6.1.2.1.138.1.7.1.1,ISIS-MIB::isisRAEntry,,not-accessible,isisCircIndex:isisRAIndex,current,,Each entry defines a configured Reachable Address to an NSAP or Address Prefix. Dynamically created rows MUST survive an agent reboot.
.1.3.6.1.2.1.138.1.7.1.1.1,ISIS-MIB::isisRAIndex,Unsigned32,not-accessible,,current,,The identifier for this isisRAEntry. This value must be unique amongst all Reachable Addresses on the same parent Circuit.
.1.3.6.1.2.1.138.1.7.1.1.2,ISIS-MIB::isisRAExistState,INTEGER,read-create,,current,active(1):notInService(2):notReady(3):createAndGo(4):createAndWait(5):destroy(6),The existence state of this Reachable Address. This object follows the ManualOrAutomatic behaviors. Support for 'createAndWait' and 'notInService' is not required. A row entry cannot be modified when the value of this object is 'active'.
.1.3.6.1.2.1.138.1.7.1.1.3,ISIS-MIB::isisRAAdminState,INTEGER,read-create,,current,on(1):off(2),The administrative state of the Reachable Address. This object follows the ManualOrAutomatic behaviors.
.1.3.6.1.2.1.138.1.7.1.1.4,ISIS-MIB::isisRAAddrPrefix,OCTET,read-create,,current,,The destination of this Reachable Address. This is an Address Prefix. This object follows the ReplaceOnlyWhileDisabled and ManualOrAutomatic behaviors.
.1.3.6.1.2.1.138.1.7.1.1.5,ISIS-MIB::isisRAMapType,INTEGER,read-create,,current,none(1):explicit(2):extractIDI(3):extractDSP(4),The type of mapping to be employed to ascertain the SNPA Address that should be used in forwarding PDUs for this Reachable Address prefix. This object follows the ManualOrAutomatic behavior. The following values of mapping type are defined: none: The mapping is null because the neighbor SNPA is implicit by nature of the subnetwork (e.g., a point-to-point linkage). explicit: The subnetwork addresses in the object isisRASNPAAddress are to be used. extractIDI: The SNPA is embedded in the IDI of the destination NSAP Address. The mapping algorithm extracts the SNPA to be used according to the format and encoding rules of ISO8473/Add2. This SNPA extraction algorithm can be used in conjunction with Reachable Address prefixes from the X.121, F.69, E.163, and E.164 addressing subdomains. extractDSP: All, or a suffix, of the SNPA is embedded in the DSP of the destination address. This SNPA extraction algorithm extracts the embedded subnetwork addressing information by performing a logical AND of the isisRASNPAMask object value with the destination address. The part of the SNPA extracted from the destination NSAP is appended to the isisRASNPAPrefix object value to form the next hop subnetwork addressing information.
.1.3.6.1.2.1.138.1.7.1.1.6,ISIS-MIB::isisRAMetric,Unsigned32,read-create,,current,,The metric value for reaching the specified prefix over this circuit. This object follows the ManualOrAutomatic behavior.
.1.3.6.1.2.1.138.1.7.1.1.7,ISIS-MIB::isisRAMetricType,INTEGER,read-create,,current,internal(1):external(2),Indicates whether the metric is internal or external. This object follows the ManualOrAutomatic behavior.
.1.3.6.1.2.1.138.1.7.1.1.8,ISIS-MIB::isisRASNPAAddress,OCTET,read-create,,current,,The SNPA Address to which a PDU may be forwarded in order to reach a destination that matches the address prefix of the Reachable Address. This object follows the ManualOrAutomatic behavior.
.1.3.6.1.2.1.138.1.7.1.1.9,ISIS-MIB::isisRASNPAMask,OCTET,read-create,,current,,A bit mask with 1 bit indicating the positions in the effective destination address from which embedded SNPA information is to be extracted. For the extraction, the first octet of the isisRASNPAMask object value is aligned with the first octet (AFI) of the NSAP Address. If the isisRASNPAMask object value and NSAP Address are of different lengths, the shorter of the two is logically padded with zeros before performing the extraction. This object follows the ManualOrAutomatic behavior.
.1.3.6.1.2.1.138.1.7.1.1.10,ISIS-MIB::isisRASNPAPrefix,OCTET,read-create,,current,,A fixed SNPA prefix for use when the isisRAMapType is extractDSP. The SNPA Address to use is formed by concatenating the fixed SNPA prefix with a variable SNPA part that is extracted from the effective destination address. For Reachable Address prefixes in which the entire SNPA is embedded in the DSP, the SNPA Prefix shall be null. This object follows the ManualOrAutomatic behavior.
.1.3.6.1.2.1.138.1.7.1.1.11,ISIS-MIB::isisRAType,INTEGER,read-create,,current,manual(1):automatic(2),The type of Reachable address. Those of type manual are created by the network manager. Those of type automatic are created through propagation of routing information from another routing protocol (e.g., IDRP). 
.1.3.6.1.2.1.138.1.8,ISIS-MIB::isisIPReachAddr,,,,,,
.1.3.6.1.2.1.138.1.8.1,ISIS-MIB::isisIPRATable,,not-accessible,,current,,The table of IP Reachable Addresses to networks, subnetworks, or hosts either manually configured or learned from another protocol.
.1.3.6.1.2.1.138.1.8.1.1,ISIS-MIB::isisIPRAEntry,,not-accessible,isisSysLevelIndex:isisIPRADestType:isisIPRADest:isisIPRADestPrefixLen:isisIPRANextHopIndex,current,,Each entry defines an IP Reachable Address to a network, subnetwork, or host. Each IP Reachable Address may have multiple entries in the table, one for each equal cost path to the reachable address. Dynamically created rows MUST survive an agent reboot. Implementers need to be aware that if the total number of elements (octets or sub-identifiers) in isisIPRADestr, isisIPRADestPrefixLen, and isisIPRANextHopIndex is too great, then OIDs of column instances in this table will have more than 128 subidentifiers and cannot be accessed using SNMPv1, SNMPv2c, or SNMPv3.
.1.3.6.1.2.1.138.1.8.1.1.1,ISIS-MIB::isisIPRADestType,INTEGER,not-accessible,,current,unknown(0):ipv4(1):ipv6(2):ipv4z(3):ipv6z(4):dns(16),The type of this IP Reachable Address.
.1.3.6.1.2.1.138.1.8.1.1.2,ISIS-MIB::isisIPRADest,OCTET,not-accessible,,current,,The destination of this IP Reachable Address. This is a network address, subnetwork address, or host address. The type of this address is determined by the value of the isisIPRADestType object.
.1.3.6.1.2.1.138.1.8.1.1.3,ISIS-MIB::isisIPRADestPrefixLen,Unsigned32,not-accessible,,current,,The length of the IP Netmask for Reachability Address. The values for the index objects isisIPRADest and isisIPRADestPrefixLen must be consistent. When the value of isisIPRADest (excluding the zone index, if one is present) is x, then the bitwise logical-AND of x with the value of the mask formed from the corresponding index object isisIPRADestPrefixLen MUST be equal to x. If not, then the index pair is not consistent, and an inconsistentName error must be returned on SET or CREATE requests.
.1.3.6.1.2.1.138.1.8.1.1.4,ISIS-MIB::isisIPRANextHopIndex,Unsigned32,not-accessible,,current,,Index of next hop. Used when there are multiple Equal Cost Multipath alternatives for the same destination.
.1.3.6.1.2.1.138.1.8.1.1.5,ISIS-MIB::isisIPRANextHopType,INTEGER,read-create,,current,unknown(0):ipv4(1):ipv6(2):ipv4z(3):ipv6z(4):dns(16),The type of the IP next hop address.
.1.3.6.1.2.1.138.1.8.1.1.6,ISIS-MIB::isisIPRANextHop,OCTET,read-create,,current,,The IP next hop to this destination. The type of this address is determined by the value of the isisIPRANextHopType object.
.1.3.6.1.2.1.138.1.8.1.1.7,ISIS-MIB::isisIPRAType,INTEGER,read-create,,current,manual(1):automatic(2),The type of this IP Reachable Address. Those of type manual are created by the network manager. Those of type automatic are created through propagation of routing information from another routing protocol. This object follows the ManualOrAutomatic behavior.
.1.3.6.1.2.1.138.1.8.1.1.8,ISIS-MIB::isisIPRAExistState,INTEGER,read-create,,current,active(1):notInService(2):notReady(3):createAndGo(4):createAndWait(5):destroy(6),The state of this IP Reachable Address. This object follows the ExistenceState and ManualOrAutomatic behaviors. Support for 'createAndWait' and 'notInService' is not required. A row entry cannot be modified when the value of this object is 'active'.
.1.3.6.1.2.1.138.1.8.1.1.9,ISIS-MIB::isisIPRAAdminState,INTEGER,read-create,,current,on(1):off(2),The administrative state of the IP Reachable Address. This object follows the IsisAdminState and ManualOrAutomatic behaviors.
.1.3.6.1.2.1.138.1.8.1.1.10,ISIS-MIB::isisIPRAMetric,Unsigned32,read-create,,current,,The metric value for reaching the specified destination over this circuit. This object follows the ManualOrAutomatic behavior.
.1.3.6.1.2.1.138.1.8.1.1.11,ISIS-MIB::isisIPRAMetricType,INTEGER,read-create,,current,internal(1):external(2),Indicates whether the metric is internal or external. This object follows the ManualOrAutomatic behavior.
.1.3.6.1.2.1.138.1.8.1.1.12,ISIS-MIB::isisIPRAFullMetric,Unsigned32,read-create,,current,,The wide metric value for reaching the specified destination over this circuit. This object follows the ManualOrAutomatic behavior.
.1.3.6.1.2.1.138.1.8.1.1.13,ISIS-MIB::isisIPRASNPAAddress,OCTET,read-create,,current,,The SNPA Address to which a PDU may be forwarded in order to reach a destination that matches this IP Reachable Address. This object follows the ManualOrAutomatic behavior.
.1.3.6.1.2.1.138.1.8.1.1.14,ISIS-MIB::isisIPRASourceType,INTEGER,read-only,,current,static(1):direct(2):ospfv2(3):ospfv3(4):isis(5):rip(6):igrp(7):eigrp(8):bgp(9):other(10),The origin of this route.
.1.3.6.1.2.1.138.1.9,ISIS-MIB::isisLSPDataBase,,,,,,
.1.3.6.1.2.1.138.1.9.1,ISIS-MIB::isisLSPSummaryTable,,not-accessible,,current,,The table of LSP Headers.
.1.3.6.1.2.1.138.1.9.1.1,ISIS-MIB::isisLSPSummaryEntry,,not-accessible,isisLSPLevel:isisLSPID,current,,Each entry provides a summary describing an LSP currently stored in the system. Dynamically learned rows will not survive an agent reboot.
.1.3.6.1.2.1.138.1.9.1.1.1,ISIS-MIB::isisLSPLevel,INTEGER,not-accessible,,current,area(1):domain(2),At which level does this LSP appear?
.1.3.6.1.2.1.138.1.9.1.1.2,ISIS-MIB::isisLSPID,OCTET,not-accessible,,current,,The 8-byte LSP ID for this Link State PDU.
.1.3.6.1.2.1.138.1.9.1.1.3,ISIS-MIB::isisLSPSeq,Unsigned32,read-only,,current,,The sequence number for this LSP.
.1.3.6.1.2.1.138.1.9.1.1.4,ISIS-MIB::isisLSPZeroLife,INTEGER,read-only,,current,true(1):false(2),Is this LSP being purged by this system?
.1.3.6.1.2.1.138.1.9.1.1.5,ISIS-MIB::isisLSPChecksum,Unsigned32,read-only,,current,,The 16-bit Fletcher Checksum for this LSP.
.1.3.6.1.2.1.138.1.9.1.1.6,ISIS-MIB::isisLSPLifetimeRemain,Unsigned32,read-only,,current,,The remaining lifetime, in seconds, for this LSP.
.1.3.6.1.2.1.138.1.9.1.1.7,ISIS-MIB::isisLSPPDULength,Unsigned32,read-only,,current,,The length of this LSP.
.1.3.6.1.2.1.138.1.9.1.1.8,ISIS-MIB::isisLSPAttributes,Unsigned32,read-only,,current,,Flags carried by the LSP.
.1.3.6.1.2.1.138.1.9.2,ISIS-MIB::isisLSPTLVTable,,not-accessible,,current,,The table of LSPs in the database.
.1.3.6.1.2.1.138.1.9.2.1,ISIS-MIB::isisLSPTLVEntry,,not-accessible,isisLSPLevel:isisLSPID:isisLSPTLVIndex,current,,Each entry describes a TLV within an LSP currently stored in the system. Dynamically learned rows will not survive an agent reboot.
.1.3.6.1.2.1.138.1.9.2.1.1,ISIS-MIB::isisLSPTLVIndex,Unsigned32,not-accessible,,current,,The index of this TLV in the LSP. The first TLV has index 1, and the Nth TLV has an index of N.
.1.3.6.1.2.1.138.1.9.2.1.2,ISIS-MIB::isisLSPTLVSeq,Unsigned32,read-only,,current,,The sequence number for this LSP.
.1.3.6.1.2.1.138.1.9.2.1.3,ISIS-MIB::isisLSPTLVChecksum,Unsigned32,read-only,,current,,The 16-bit Fletcher Checksum for this LSP.
.1.3.6.1.2.1.138.1.9.2.1.4,ISIS-MIB::isisLSPTLVType,Unsigned32,read-only,,current,,The type of this TLV.
.1.3.6.1.2.1.138.1.9.2.1.5,ISIS-MIB::isisLSPTLVLen,Unsigned32,read-only,,current,,The length of this TLV.
.1.3.6.1.2.1.138.1.9.2.1.6,ISIS-MIB::isisLSPTLVValue,OCTET,read-only,,current,,The value of this TLV.
.1.3.6.1.2.1.138.1.10,ISIS-MIB::isisNotification,,,,,,
.1.3.6.1.2.1.138.1.10.1,ISIS-MIB::isisNotificationEntry,,,,,,
.1.3.6.1.2.1.138.1.10.1.1,ISIS-MIB::isisNotificationSysLevelIndex,INTEGER,accessible-for-notify,,current,level1(1):level2(2):level1and2(3),The system level for this notification.
.1.3.6.1.2.1.138.1.10.1.2,ISIS-MIB::isisNotificationCircIfIndex,Unsigned32,accessible-for-notify,,current,,The identifier of this circuit relevant to this notification.
.1.3.6.1.2.1.138.1.10.1.3,ISIS-MIB::isisPduLspId,OCTET,accessible-for-notify,,current,,An Octet String that uniquely identifies a Link State PDU.
.1.3.6.1.2.1.138.1.10.1.4,ISIS-MIB::isisPduFragment,OCTET,accessible-for-notify,,current,,Holds up to 64 initial bytes of a PDU that triggered the notification.
.1.3.6.1.2.1.138.1.10.1.5,ISIS-MIB::isisPduFieldLen,Unsigned32,accessible-for-notify,,current,,Holds the System ID length reported in PDU we received.
.1.3.6.1.2.1.138.1.10.1.6,ISIS-MIB::isisPduMaxAreaAddress,Unsigned32,accessible-for-notify,,current,,Holds the Max Area Addresses reported in a PDU we received.
.1.3.6.1.2.1.138.1.10.1.7,ISIS-MIB::isisPduProtocolVersion,Unsigned32,accessible-for-notify,,current,,Holds the Protocol version reported in PDU we received.
.1.3.6.1.2.1.138.1.10.1.8,ISIS-MIB::isisPduLspSize,Unsigned32,accessible-for-notify,,current,,Holds the size of LSP we received that is too big to forward.
.1.3.6.1.2.1.138.1.10.1.9,ISIS-MIB::isisPduOriginatingBufferSize,Unsigned32,accessible-for-notify,,current,,Holds the size of isisSysLevelOrigLSPBuffSize advertised by the peer in the originatingLSPBufferSize TLV. If the peer does not advertise this TLV, this value is set to 0.
.1.3.6.1.2.1.138.1.10.1.10,ISIS-MIB::isisPduBufferSize,Unsigned32,accessible-for-notify,,current,,Holds the size of LSP received from peer.
.1.3.6.1.2.1.138.1.10.1.11,ISIS-MIB::isisPduProtocolsSupported,OCTET,accessible-for-notify,,current,,The list of protocols supported by an adjacent system. This may be empty.
.1.3.6.1.2.1.138.1.10.1.12,ISIS-MIB::isisAdjState,INTEGER,accessible-for-notify,,current,down(1):initializing(2):up(3):failed(4),The current state of an adjacency.
.1.3.6.1.2.1.138.1.10.1.13,ISIS-MIB::isisErrorOffset,Unsigned32,accessible-for-notify,,current,,An offset to a problem in a PDU. If the problem is a malformed TLV, this points to the beginning of the TLV. If the problem is in the header, this points to the byte that is suspicious.
.1.3.6.1.2.1.138.1.10.1.14,ISIS-MIB::isisErrorTLVType,Unsigned32,accessible-for-notify,,current,,The type for a malformed TLV.
.1.3.6.1.2.1.138.1.10.1.15,ISIS-MIB::isisNotificationAreaAddress,OCTET,accessible-for-notify,,current,,An Area Address.
.1.3.6.1.2.1.138.2,ISIS-MIB::isisConformance,,,,,,
.1.3.6.1.2.1.138.2.1,ISIS-MIB::isisCompliances,,,,,,
.1.3.6.1.2.1.138.2.1.1,ISIS-MIB::isisCompliance,,,,,,The compliance statement for agents that support the IS-IS MIB. There are a number of INDEX objects that cannot be represented in the form of OBJECT clauses in SMIv2, but for which there are compliance requirements. Those requirements and similar requirements for related objects are expressed below, in pseudo-OBJECT clause form, in this description: -- OBJECT isisSummAddressType -- SYNTAX InetAddressType { ipv4(1), ipv6(2) } -- -- DESCRIPTION -- The MIB requires support for IPv4 Summary -- Addresses and anticipates the support of -- IPv6 addresses. -- -- -- OBJECT isisRedistributeAddrType -- SYNTAX InetAddressType { ipv4(1), ipv6(2) } -- -- DESCRIPTION -- The MIB requires support for IPv4 -- Redistribution Addresses and anticipates -- the support of IPv6 addresses.
.1.3.6.1.2.1.138.2.1.2,ISIS-MIB::isisAdvancedCompliance,,,,,,The compliance statement for agents that fully support the IS-IS MIB. There are a number of INDEX objects that cannot be represented in the form of OBJECT clauses in SMIv2, but for which there are compliance requirements. Those requirements and similar requirements for related objects are expressed below, in pseudo-OBJECT clause form, in this description: -- OBJECT isisSummAddressType -- SYNTAX InetAddressType { ipv4(1), ipv6(2) } -- -- DESCRIPTION -- The MIB requires support for IPv4 Summary -- Addresses and anticipates the support of -- IPv6 addresses. -- -- -- OBJECT isisRedistributeAddrType -- SYNTAX InetAddressType { ipv4(1), ipv6(2) } -- -- DESCRIPTION -- The MIB requires support for IPv4 -- Redistribution Addresses and anticipates -- the support of IPv6 addresses.
.1.3.6.1.2.1.138.2.1.3,ISIS-MIB::isisReadOnlyCompliance,,,,,,When this MIB is implemented without support for read-create (i.e., in read-only mode), the implementation can claim read-only compliance. Such a device can then be monitored but cannot be configured with this MIB.
.1.3.6.1.2.1.138.2.2,ISIS-MIB::isisGroups,,,,,,
.1.3.6.1.2.1.138.2.2.1,ISIS-MIB::isisSystemGroup,,,,,,The collections of objects used to manage an IS-IS router.
.1.3.6.1.2.1.138.2.2.2,ISIS-MIB::isisCircuitGroup,,,,,,The collections of objects used to describe an IS-IS Circuit.
.1.3.6.1.2.1.138.2.2.3,ISIS-MIB::isisISAdjGroup,,,,,,The collections of objects used to manage an IS-IS Adjacency.
.1.3.6.1.2.1.138.2.2.4,ISIS-MIB::isisNotificationObjectGroup,,,,,,The objects used to record notification parameters.
.1.3.6.1.2.1.138.2.2.5,ISIS-MIB::isisNotificationGroup,,,,,,The collections of notifications sent by an IS.
.1.3.6.1.2.1.138.2.2.6,ISIS-MIB::isisISPDUCounterGroup,,,,,,The collections of objects used to count protocol PDUs.
.1.3.6.1.2.1.138.2.2.7,ISIS-MIB::isisRATableGroup,,,,,,The collections of objects used to manage the reachable NSAP prefixes.
.1.3.6.1.2.1.138.2.2.8,ISIS-MIB::isisISIPRADestGroup,,,,,,The collections of objects used to manage configured IP addresses.
.1.3.6.1.2.1.138.2.2.9,ISIS-MIB::isisLSPGroup,,,,,,The collections of objects used to observe the LSP Database.
.1.3.6.1.2.1.154,IANA-MAU-MIB::ianaMauMIB,,,,,,This MIB module defines dot3MauType OBJECT-IDENTITIES and IANAifMauListBits, IANAifMauMediaAvailable, IANAifMauAutoNegCapBits, and IANAifJackType TEXTUAL-CONVENTIONs, specifying enumerated values of the ifMauTypeListBits, ifMauMediaAvailable / rpMauMediaAvailable, ifMauAutoNegCapabilityBits / ifMauAutoNegCapAdvertisedBits / ifMauAutoNegCapReceivedBits and ifJackType / rpJackType objects respectively, defined in the MAU-MIB. It is intended that each new MAU type, Media Availability state, Auto Negotiation capability and/or Jack type defined by the IEEE 802.3 working group and approved for publication in a revision of IEEE Std 802.3 will be added to this MIB module, provided that it is suitable for being managed by the base objects in the MAU-MIB. An Expert Review, as defined in RFC 2434 [RFC2434], is REQUIRED for such additions. The following reference is used throughout this MIB module: [IEEE802.3] refers to: IEEE Std 802.3, 2005 Edition: 'IEEE Standard for Information technology - Telecommunications and information exchange between systems - Local and metropolitan area networks - Specific requirements - Part 3: Carrier sense multiple access with collision detection (CSMA/CD) access method and physical layer specifications'. This reference should be updated as appropriate when new MAU types, Media Availability states, Auto Negotiation capabilities, and/or Jack types are added to this MIB module. Copyright (C) The IETF Trust (2007). The initial version of this MIB module was published in RFC 4836; for full legal notices see the RFC itself. Supplementary information may be available at: http://www.ietf.org/copyrights/ianamib.html
.1.3.6.1.2.1.191,OSPFV3-MIB::ospfv3MIB,,,,,,The MIB module for OSPF version 3. Copyright (c) 2009 IETF Trust and the persons identified as authors of the code. All rights reserved. Redistribution and use in source and binary forms, with or without modification, are permitted provided that the following conditions are met: - Redistributions of source code must retain the above copyright notice, this list of conditions and the following disclaimer. - Redistributions in binary form must reproduce the above copyright notice, this list of conditions and the following disclaimer in the documentation and/or other materials provided with the distribution. - Neither the name of Internet Society, IETF or IETF Trust, nor the names of specific contributors, may be used to endorse or promote products derived from this software without specific prior written permission. THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS 'AS IS' AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. This version of this MIB module is part of RFC 5643; see the RFC itself for full legal notices.
.1.3.6.1.2.1.191.0,OSPFV3-MIB::ospfv3Notifications,,,,,,
.1.3.6.1.2.1.191.0.1,OSPFV3-MIB::ospfv3VirtIfStateChange,,,,,,An ospfv3VirtIfStateChange notification signifies that there has been a change in the state of an OSPFv3 virtual interface. This notification should be generated when the interface state regresses (e.g., goes from Point-to-Point to Down) or progresses to a terminal state (i.e., Point-to-Point).
.1.3.6.1.2.1.191.0.2,OSPFV3-MIB::ospfv3NbrStateChange,,,,,,An ospfv3NbrStateChange notification signifies that there has been a change in the state of a non-virtual OSPFv3 neighbor. This notification should be generated when the neighbor state regresses (e.g., goes from Attempt or Full to 1-Way or Down) or progresses to a terminal state (e.g., 2-Way or Full). When a neighbor transitions from or to Full on non-broadcast multi-access and broadcast networks, the notification should be generated by the Designated Router. A Designated Router transitioning to Down will be noted by ospfIfStateChange.
.1.3.6.1.2.1.191.0.3,OSPFV3-MIB::ospfv3VirtNbrStateChange,,,,,,An ospfv3VirtNbrStateChange notification signifies that there has been a change in the state of an OSPFv3 virtual neighbor. This notification should be generated when the neighbor state regresses (e.g., goes from Attempt or Full to 1-Way or Down) or progresses to a terminal state (e.g., Full).
.1.3.6.1.2.1.191.0.4,OSPFV3-MIB::ospfv3IfConfigError,,,,,,An ospfv3IfConfigError notification signifies that a packet has been received on a non-virtual interface from a router whose configuration parameters conflict with this router's configuration parameters. Note that the event optionMismatch should cause a notification only if it prevents an adjacency from forming.
.1.3.6.1.2.1.191.0.5,OSPFV3-MIB::ospfv3VirtIfConfigError,,,,,,An ospfv3VirtIfConfigError notification signifies that a packet has been received on a virtual interface from a router whose configuration parameters conflict with this router's configuration parameters. Note that the event optionMismatch should cause a notification only if it prevents an adjacency from forming.
.1.3.6.1.2.1.191.0.6,OSPFV3-MIB::ospfv3IfRxBadPacket,,,,,,An ospfv3IfRxBadPacket notification signifies that an OSPFv3 packet that cannot be parsed has been received on a non-virtual interface.
.1.3.6.1.2.1.191.0.7,OSPFV3-MIB::ospfv3VirtIfRxBadPacket,,,,,,An ospfv3VirtIfRxBadPacket notification signifies that an OSPFv3 packet that cannot be parsed has been received on a virtual interface.
.1.3.6.1.2.1.191.0.8,OSPFV3-MIB::ospfv3LsdbOverflow,,,,,,An ospfv3LsdbOverflow notification signifies that the number of LSAs in the router's link state database has exceeded ospfv3ExtAreaLsdbLimit.
.1.3.6.1.2.1.191.0.9,OSPFV3-MIB::ospfv3LsdbApproachingOverflow,,,,,,An ospfv3LsdbApproachingOverflow notification signifies that the number of LSAs in the router's link state database has exceeded ninety percent of ospfv3ExtAreaLsdbLimit.
.1.3.6.1.2.1.191.0.10,OSPFV3-MIB::ospfv3IfStateChange,,,,,,An ospfv3IfStateChange notification signifies that there has been a change in the state of a non-virtual OSPFv3 interface. This notification should be generated when the interface state regresses (e.g., goes from DR to Down) or progresses to a terminal state (i.e., Point-to-Point, DR Other, DR, or Backup).
.1.3.6.1.2.1.191.0.11,OSPFV3-MIB::ospfv3NssaTranslatorStatusChange,,,,,,An ospfv3NssaTranslatorStatusChange notification indicates that there has been a change in the router's ability to translate OSPFv3 NSSA LSAs into OSPFv3 External LSAs. This notification should be generated when the Translator Status transitions from or to any defined status on a per-area basis.
.1.3.6.1.2.1.191.0.12,OSPFV3-MIB::ospfv3RestartStatusChange,,,,,,An ospfv3RestartStatusChange notification signifies that there has been a change in the graceful restart state for the router. This notification should be generated when the router restart status changes.
.1.3.6.1.2.1.191.0.13,OSPFV3-MIB::ospfv3NbrRestartHelperStatusChange,,,,,,An ospfv3NbrRestartHelperStatusChange notification signifies that there has been a change in the graceful restart helper state for the neighbor. This notification should be generated when the neighbor restart helper status transitions for a neighbor.
.1.3.6.1.2.1.191.0.14,OSPFV3-MIB::ospfv3VirtNbrRestartHelperStatusChange,,,,,,An ospfv3VirtNbrRestartHelperStatusChange notification signifies that there has been a change in the graceful restart helper state for the virtual neighbor. This notification should be generated when the virtual neighbor restart helper status transitions for a virtual neighbor.
.1.3.6.1.2.1.191.1,OSPFV3-MIB::ospfv3Objects,,,,,,
.1.3.6.1.2.1.191.1.1,OSPFV3-MIB::ospfv3GeneralGroup,,,,,,
.1.3.6.1.2.1.191.1.1.1,OSPFV3-MIB::ospfv3RouterId,Unsigned32,read-write,,current,,A 32-bit unsigned integer uniquely identifying the router in the Autonomous System. To ensure uniqueness, this may default to the 32-bit unsigned integer representation of one of the router's IPv4 interface addresses (if IPv4 is configured on the router). This object is persistent, and when written, the entity SHOULD save the change to non-volatile storage.
.1.3.6.1.2.1.191.1.1.2,OSPFV3-MIB::ospfv3AdminStatus,INTEGER,read-write,,current,enabled(1):disabled(2),The administrative status of OSPFv3 in the router. The value 'enabled' denotes that the OSPFv3 Process is active on at least one interface; 'disabled' disables it on all interfaces. This object is persistent, and when written, the entity SHOULD save the change to non-volatile storage.
.1.3.6.1.2.1.191.1.1.3,OSPFV3-MIB::ospfv3VersionNumber,INTEGER,read-only,,current,version3(3),The version number of OSPF for IPv6 is 3.
.1.3.6.1.2.1.191.1.1.4,OSPFV3-MIB::ospfv3AreaBdrRtrStatus,INTEGER,read-only,,current,true(1):false(2),A flag to denote whether this router is an area border router. The value of this object is true (1) when the router is an area border router.
.1.3.6.1.2.1.191.1.1.5,OSPFV3-MIB::ospfv3ASBdrRtrStatus,INTEGER,read-write,,current,true(1):false(2),A flag to note whether this router is configured as an Autonomous System border router. This object is persistent, and when written, the entity SHOULD save the change to non-volatile storage.
.1.3.6.1.2.1.191.1.1.6,OSPFV3-MIB::ospfv3AsScopeLsaCount,Gauge32,read-only,,current,,The number of AS-scope (e.g., AS-External) link state advertisements in the link state database.
.1.3.6.1.2.1.191.1.1.7,OSPFV3-MIB::ospfv3AsScopeLsaCksumSum,Unsigned32,read-only,,current,,The 32-bit unsigned sum of the LS checksums of the AS-scoped link state advertisements contained in the link state database. This sum can be used to determine if there has been a change in a router's link state database or to compare the link state database of two routers.
.1.3.6.1.2.1.191.1.1.8,OSPFV3-MIB::ospfv3OriginateNewLsas,Counter32,read-only,,current,,The number of new link state advertisements that have been originated. This number is incremented each time the router originates a new LSA. Discontinuities in the value of this counter can occur at re-initialization of the management system and at other times as indicated by the value of ospfv3DiscontinuityTime.
.1.3.6.1.2.1.191.1.1.9,OSPFV3-MIB::ospfv3RxNewLsas,Counter32,read-only,,current,,The number of link state advertisements received that are determined to be new instantiations. This number does not include newer instantiations of self-originated link state advertisements. Discontinuities in the value of this counter can occur at re-initialization of the management system and at other times as indicated by the value of ospfv3DiscontinuityTime.
.1.3.6.1.2.1.191.1.1.10,OSPFV3-MIB::ospfv3ExtLsaCount,Gauge32,read-only,,current,,The number of External (LS type 0x4005) in the link state database.
.1.3.6.1.2.1.191.1.1.11,OSPFV3-MIB::ospfv3ExtAreaLsdbLimit,Integer32,read-write,,current,,The maximum number of non-default AS-external-LSA entries that can be stored in the link state database. If the value is -1, then there is no limit. When the number of non-default AS-external-LSAs in a router's link state database reaches ospfv3ExtAreaLsdbLimit, the router enters Overflow state. The router never holds more than ospfv3ExtAreaLsdbLimit non-default AS-external-LSAs in its database. ospfv3ExtAreaLsdbLimit MUST be set identically in all routers attached to the OSPFv3 backbone and/or any regular OSPFv3 area (i.e., OSPFv3 stub areas and not-so-stubby-areas (NSSAs) are excluded). This object is persistent, and when written, the entity SHOULD save the change to non-volatile storage.
.1.3.6.1.2.1.191.1.1.12,OSPFV3-MIB::ospfv3ExitOverflowInterval,Unsigned32,read-write,,current,,The number of seconds that, after entering Overflow state, a router will attempt to leave Overflow state. This allows the router to again originate non-default, AS-External-LSAs. When set to 0, the router will not leave Overflow state until restarted. This object is persistent, and when written, the entity SHOULD save the change to non-volatile storage.
.1.3.6.1.2.1.191.1.1.13,OSPFV3-MIB::ospfv3DemandExtensions,INTEGER,read-write,,current,true(1):false(2),The router's support for demand circuits. The value of this object is true (1) when demand circuits are supported. This object is persistent, and when written, the entity SHOULD save the change to non-volatile storage.
.1.3.6.1.2.1.191.1.1.14,OSPFV3-MIB::ospfv3ReferenceBandwidth,Unsigned32,read-write,,current,,Reference bandwidth in kilobits per second for calculating default interface metrics. The default value is 100,000 KBPS (100 MBPS). This object is persistent, and when written, the entity SHOULD save the change to non-volatile storage.
.1.3.6.1.2.1.191.1.1.15,OSPFV3-MIB::ospfv3RestartSupport,INTEGER,read-write,,current,none(1):plannedOnly(2):plannedAndUnplanned(3),The router's support for OSPF graceful restart. Options include no restart support, only planned restarts, or both planned and unplanned restarts. This object is persistent, and when written, the entity SHOULD save the change to non-volatile storage.
.1.3.6.1.2.1.191.1.1.16,OSPFV3-MIB::ospfv3RestartInterval,Unsigned32,read-write,,current,,Configured OSPF graceful restart timeout interval. This object is persistent, and when written, the entity SHOULD save the change to non-volatile storage.
.1.3.6.1.2.1.191.1.1.17,OSPFV3-MIB::ospfv3RestartStrictLsaChecking,INTEGER,read-write,,current,true(1):false(2),Indicates if strict LSA checking is enabled for graceful restart. A value of true (1) indicates that strict LSA checking is enabled. This object is persistent, and when written, the entity SHOULD save the change to non-volatile storage.
.1.3.6.1.2.1.191.1.1.18,OSPFV3-MIB::ospfv3RestartStatus,INTEGER,read-only,,current,notRestarting(1):plannedRestart(2):unplannedRestart(3),The current status of OSPF graceful restart capability.
.1.3.6.1.2.1.191.1.1.19,OSPFV3-MIB::ospfv3RestartAge,Unsigned32,read-only,,current,,Remaining time in the current OSPF graceful restart interval.
.1.3.6.1.2.1.191.1.1.20,OSPFV3-MIB::ospfv3RestartExitReason,INTEGER,read-only,,current,none(1):inProgress(2):completed(3):timedOut(4):topologyChanged(5),Describes the outcome of the last attempt at a graceful restart. none: no restart has yet been attempted. inProgress: a restart attempt is currently underway. completed: the last restart completed successfully. timedOut: the last restart timed out. topologyChanged: the last restart was aborted due to a topology change.
.1.3.6.1.2.1.191.1.1.21,OSPFV3-MIB::ospfv3NotificationEnable,INTEGER,read-write,,current,true(1):false(2),This object provides a coarse level of control over the generation of OSPFv3 notifications. If this object is set to true (1), then it enables the generation of OSPFv3 notifications. If it is set to false (2), these notifications are not generated. This object is persistent, and when written, the entity SHOULD save the change to non-volatile storage.
.1.3.6.1.2.1.191.1.1.22,OSPFV3-MIB::ospfv3StubRouterSupport,INTEGER,read-only,,current,true(1):false(2),The router's support for stub router functionality. An object value of true (1) indicates that stub router functionality is supported.
.1.3.6.1.2.1.191.1.1.23,OSPFV3-MIB::ospfv3StubRouterAdvertisement,INTEGER,read-write,,current,doNotAdvertise(1):advertise(2),This object controls the advertisement of stub LSAs by the router. The value doNotAdvertise (1) will result in the advertisement of standard LSAs and is the default value. This object is persistent, and when written, the entity SHOULD save the change to non-volatile storage.
.1.3.6.1.2.1.191.1.1.24,OSPFV3-MIB::ospfv3DiscontinuityTime,TimeTicks,read-only,,current,,The value of sysUpTime on the most recent occasion at which any one of this MIB's counters suffered a discontinuity. If no such discontinuities have occurred since the last re-initialization of the local management subsystem, then this object contains a zero value.
.1.3.6.1.2.1.191.1.1.25,OSPFV3-MIB::ospfv3RestartTime,TimeTicks,read-only,,current,,The value of sysUpTime on the most recent occasion at which the ospfv3RestartExitReason was updated.
.1.3.6.1.2.1.191.1.2,OSPFV3-MIB::ospfv3AreaTable,,not-accessible,,current,,Information describing the configured parameters and cumulative statistics of the router's attached areas. The interfaces and virtual links are configured as part of these areas. Area 0, by definition, is the backbone area.
.1.3.6.1.2.1.191.1.2.1,OSPFV3-MIB::ospfv3AreaEntry,,not-accessible,ospfv3AreaId,current,,Information describing the configured parameters and cumulative statistics of one of the router's attached areas. The information in this table is persistent, and when written, the entity SHOULD save the a change to non-volatile storage.
.1.3.6.1.2.1.191.1.2.1.1,OSPFV3-MIB::ospfv3AreaId,Unsigned32,not-accessible,,current,,A 32-bit unsigned integer uniquely identifying an area. Area ID 0 is used for the OSPFv3 backbone.
.1.3.6.1.2.1.191.1.2.1.2,OSPFV3-MIB::ospfv3AreaImportAsExtern,INTEGER,read-create,,current,importExternal(1):importNoExternal(2):importNssa(3),Indicates whether an area is a stub area, NSSA, or standard area. AS-scope LSAs are not imported into stub areas or NSSAs. NSSAs import AS-External data as NSSA LSAs that have Area-scope.
.1.3.6.1.2.1.191.1.2.1.3,OSPFV3-MIB::ospfv3AreaSpfRuns,Counter32,read-only,,current,,The number of times that the intra-area route table has been calculated using this area's link state database. This is typically done using Dijkstra's algorithm. Discontinuities in the value of this counter can occur at re-initialization of the management system and at other times as indicated by the value of ospfv3DiscontinuityTime.
.1.3.6.1.2.1.191.1.2.1.4,OSPFV3-MIB::ospfv3AreaBdrRtrCount,Gauge32,read-only,,current,,The total number of area border routers reachable within this area. This is initially zero, and is calculated in each Shortest Path First (SPF) pass.
.1.3.6.1.2.1.191.1.2.1.5,OSPFV3-MIB::ospfv3AreaAsBdrRtrCount,Gauge32,read-only,,current,,The total number of Autonomous System border routers reachable within this area. This is initially zero, and is calculated in each SPF pass.
.1.3.6.1.2.1.191.1.2.1.6,OSPFV3-MIB::ospfv3AreaScopeLsaCount,Gauge32,read-only,,current,,The total number of Area-scope link state advertisements in this area's link state database.
.1.3.6.1.2.1.191.1.2.1.7,OSPFV3-MIB::ospfv3AreaScopeLsaCksumSum,Unsigned32,read-only,,current,,The 32-bit unsigned sum of the Area-scope link state advertisements' LS checksums contained in this area's link state database. The sum can be used to determine if there has been a change in a router's link state database or to compare the link state database of two routers.
.1.3.6.1.2.1.191.1.2.1.8,OSPFV3-MIB::ospfv3AreaSummary,INTEGER,read-create,,current,noAreaSummary(1):sendAreaSummary(2),The variable ospfv3AreaSummary controls the import of Inter-Area LSAs into stub and NSSA areas. It has no effect on other areas. If it is noAreaSummary, the router will neither originate nor propagate Inter-Area LSAs into the stub or NSSA area. It will only advertise a default route. If it is sendAreaSummary, the router will both summarize and propagate Inter-Area LSAs.
.1.3.6.1.2.1.191.1.2.1.9,OSPFV3-MIB::ospfv3AreaRowStatus,INTEGER,read-create,,current,active(1):notInService(2):notReady(3):createAndGo(4):createAndWait(5):destroy(6),This object permits management of the table by facilitating actions such as row creation, construction, and destruction. The value of this object has no effect on whether other objects in this conceptual row can be modified.
.1.3.6.1.2.1.191.1.2.1.10,OSPFV3-MIB::ospfv3AreaStubMetric,Integer32,read-create,,current,,The metric value advertised for the default route into stub and NSSA areas. By default, this equals the least metric among the interfaces to other areas.
.1.3.6.1.2.1.191.1.2.1.11,OSPFV3-MIB::ospfv3AreaNssaTranslatorRole,INTEGER,read-create,,current,always(1):candidate(2),Indicates an NSSA border router's policy to perform NSSA translation of NSSA-LSAs into AS-External-LSAs.
.1.3.6.1.2.1.191.1.2.1.12,OSPFV3-MIB::ospfv3AreaNssaTranslatorState,INTEGER,read-only,,current,enabled(1):elected(2):disabled(3),Indicates if and how an NSSA border router is performing NSSA translation of NSSA-LSAs into AS-External-LSAs. When this object is set to 'enabled', the NSSA border router's ospfv3AreaNssaTranslatorRole has been set to 'always'. When this object is set to 'elected', a candidate NSSA border router is translating NSSA-LSAs into AS-External-LSAs. When this object is set to 'disabled', a candidate NSSA Border router is NOT translating NSSA-LSAs into AS-External-LSAs.
.1.3.6.1.2.1.191.1.2.1.13,OSPFV3-MIB::ospfv3AreaNssaTranslatorStabInterval,Unsigned32,read-create,,current,,The stability interval defined as the number of seconds after an elected translator determines its services are no longer required that it should continue to perform its translation duties.
.1.3.6.1.2.1.191.1.2.1.14,OSPFV3-MIB::ospfv3AreaNssaTranslatorEvents,Counter32,read-only,,current,,Indicates the number of Translator state changes that have occurred since the last start-up of the OSPFv3 routing process. Discontinuities in the value of this counter can occur at re-initialization of the management system and at other times as indicated by the value of ospfv3DiscontinuityTime.
.1.3.6.1.2.1.191.1.2.1.15,OSPFV3-MIB::ospfv3AreaStubMetricType,INTEGER,read-create,,current,ospfv3Metric(1):comparableCost(2):nonComparable(3),This variable assigns the type of metric advertised as a default route.
.1.3.6.1.2.1.191.1.2.1.16,OSPFV3-MIB::ospfv3AreaTEEnabled,INTEGER,read-create,,current,true(1):false(2),Indicates whether or not traffic engineering is enabled in the area. The object is set to the value true (1) to enable traffic engineering. Traffic engineering is disabled by default.
.1.3.6.1.2.1.191.1.3,OSPFV3-MIB::ospfv3AsLsdbTable,,not-accessible,,current,,The OSPFv3 Process's AS-scope link state database (LSDB). The LSDB contains the AS-scope link state advertisements from throughout the areas that the device is attached to.
.1.3.6.1.2.1.191.1.3.1,OSPFV3-MIB::ospfv3AsLsdbEntry,,not-accessible,ospfv3AsLsdbType:ospfv3AsLsdbRouterId:ospfv3AsLsdbLsid,current,,A single AS-scope link state advertisement.
.1.3.6.1.2.1.191.1.3.1.1,OSPFV3-MIB::ospfv3AsLsdbType,Unsigned32,not-accessible,,current,,The type of the link state advertisement. Each link state type has a separate advertisement format. AS-scope LSAs not recognized by the router may be stored in the database.
.1.3.6.1.2.1.191.1.3.1.2,OSPFV3-MIB::ospfv3AsLsdbRouterId,Unsigned32,not-accessible,,current,,The 32-bit number that uniquely identifies the originating router in the Autonomous System.
.1.3.6.1.2.1.191.1.3.1.3,OSPFV3-MIB::ospfv3AsLsdbLsid,Unsigned32,not-accessible,,current,,The Link State ID is an LS type-specific field containing a unique identifier; it identifies the piece of the routing domain that is being described by the advertisement. In contrast to OSPFv2, the LSID has no addressing semantics.
.1.3.6.1.2.1.191.1.3.1.4,OSPFV3-MIB::ospfv3AsLsdbSequence,Integer32,read-only,,current,,The sequence number field is a signed 32-bit integer. It is used to detect old and duplicate link state advertisements. The space of sequence numbers is linearly ordered. The larger the sequence number, the more recent the advertisement.
.1.3.6.1.2.1.191.1.3.1.5,OSPFV3-MIB::ospfv3AsLsdbAge,Unsigned32,read-only,,current,,This field is the age of the link state advertisement in seconds. The high-order bit of the LS age field is considered the DoNotAge bit for support of on-demand circuits.
.1.3.6.1.2.1.191.1.3.1.6,OSPFV3-MIB::ospfv3AsLsdbChecksum,Integer32,read-only,,current,,This field is the checksum of the complete contents of the advertisement, excepting the age field. The age field is excepted so that an advertisement's age can be incremented without updating the checksum. The checksum used is the same that is used for ISO connectionless datagrams; it is commonly referred to as the Fletcher checksum.
.1.3.6.1.2.1.191.1.3.1.7,OSPFV3-MIB::ospfv3AsLsdbAdvertisement,OCTET,read-only,,current,,The entire link state advertisement, including its header.
.1.3.6.1.2.1.191.1.3.1.8,OSPFV3-MIB::ospfv3AsLsdbTypeKnown,INTEGER,read-only,,current,true(1):false(2),The value true (1) indicates that the LSA type is recognized by this router.
.1.3.6.1.2.1.191.1.4,OSPFV3-MIB::ospfv3AreaLsdbTable,,not-accessible,,current,,The OSPFv3 Process's Area-scope LSDB. The LSDB contains the Area-scope link state advertisements from throughout the area that the device is attached to.
.1.3.6.1.2.1.191.1.4.1,OSPFV3-MIB::ospfv3AreaLsdbEntry,,not-accessible,ospfv3AreaLsdbAreaId:ospfv3AreaLsdbType:ospfv3AreaLsdbRouterId:ospfv3AreaLsdbLsid,current,,A single Area-scope link state advertisement.
.1.3.6.1.2.1.191.1.4.1.1,OSPFV3-MIB::ospfv3AreaLsdbAreaId,Unsigned32,not-accessible,,current,,The 32-bit identifier of the Area from which the LSA was received.
.1.3.6.1.2.1.191.1.4.1.2,OSPFV3-MIB::ospfv3AreaLsdbType,Unsigned32,not-accessible,,current,,The type of the link state advertisement. Each link state type has a separate advertisement format. Area-scope LSAs unrecognized by the router are also stored in this database.
.1.3.6.1.2.1.191.1.4.1.3,OSPFV3-MIB::ospfv3AreaLsdbRouterId,Unsigned32,not-accessible,,current,,The 32-bit number that uniquely identifies the originating router in the Autonomous System.
.1.3.6.1.2.1.191.1.4.1.4,OSPFV3-MIB::ospfv3AreaLsdbLsid,Unsigned32,not-accessible,,current,,The Link State ID is an LS type-specific field containing a unique identifier; it identifies the piece of the routing domain that is being described by the advertisement. In contrast to OSPFv2, the LSID has no addressing semantics.
.1.3.6.1.2.1.191.1.4.1.5,OSPFV3-MIB::ospfv3AreaLsdbSequence,Integer32,read-only,,current,,The sequence number field is a signed 32-bit integer. It is used to detect old and duplicate link state advertisements. The space of sequence numbers is linearly ordered. The larger the sequence number, the more recent the advertisement.
.1.3.6.1.2.1.191.1.4.1.6,OSPFV3-MIB::ospfv3AreaLsdbAge,Unsigned32,read-only,,current,,This field is the age of the link state advertisement in seconds. The high-order bit of the LS age field is considered the DoNotAge bit for support of on-demand circuits.
.1.3.6.1.2.1.191.1.4.1.7,OSPFV3-MIB::ospfv3AreaLsdbChecksum,Integer32,read-only,,current,,This field is the checksum of the complete contents of the advertisement, excepting the age field. The age field is excepted so that an advertisement's age can be incremented without updating the checksum. The checksum used is the same that is used for ISO connectionless datagrams; it is commonly referred to as the Fletcher checksum.
.1.3.6.1.2.1.191.1.4.1.8,OSPFV3-MIB::ospfv3AreaLsdbAdvertisement,OCTET,read-only,,current,,The entire link state advertisement, including its header.
.1.3.6.1.2.1.191.1.4.1.9,OSPFV3-MIB::ospfv3AreaLsdbTypeKnown,INTEGER,read-only,,current,true(1):false(2),The value true (1) indicates that the LSA type is recognized by this router.
.1.3.6.1.2.1.191.1.5,OSPFV3-MIB::ospfv3LinkLsdbTable,,not-accessible,,current,,The OSPFv3 Process's Link-scope LSDB for non-virtual interfaces. The LSDB contains the Link-scope link state advertisements from the interfaces that the device is attached to.
.1.3.6.1.2.1.191.1.5.1,OSPFV3-MIB::ospfv3LinkLsdbEntry,,not-accessible,ospfv3LinkLsdbIfIndex:ospfv3LinkLsdbIfInstId:ospfv3LinkLsdbType:ospfv3LinkLsdbRouterId:ospfv3LinkLsdbLsid,current,,A single Link-scope link state advertisement.
.1.3.6.1.2.1.191.1.5.1.1,OSPFV3-MIB::ospfv3LinkLsdbIfIndex,Integer32,not-accessible,,current,,The identifier of the link from which the LSA was received.
.1.3.6.1.2.1.191.1.5.1.2,OSPFV3-MIB::ospfv3LinkLsdbIfInstId,Unsigned32,not-accessible,,current,,The identifier of the interface instance from which the LSA was received.
.1.3.6.1.2.1.191.1.5.1.3,OSPFV3-MIB::ospfv3LinkLsdbType,Unsigned32,not-accessible,,current,,The type of the link state advertisement. Each link state type has a separate advertisement format. Link-scope LSAs unrecognized by the router are also stored in this database.
.1.3.6.1.2.1.191.1.5.1.4,OSPFV3-MIB::ospfv3LinkLsdbRouterId,Unsigned32,not-accessible,,current,,The 32-bit number that uniquely identifies the originating router in the Autonomous System.
.1.3.6.1.2.1.191.1.5.1.5,OSPFV3-MIB::ospfv3LinkLsdbLsid,Unsigned32,not-accessible,,current,,The Link State ID is an LS type-specific field containing a unique identifier; it identifies the piece of the routing domain that is being described by the advertisement. In contrast to OSPFv2, the LSID has no addressing semantics. However, in OSPFv3 the Link State ID always contains the flooding scope of the LSA.
.1.3.6.1.2.1.191.1.5.1.6,OSPFV3-MIB::ospfv3LinkLsdbSequence,Integer32,read-only,,current,,The sequence number field is a signed 32-bit integer. It is used to detect old and duplicate link state advertisements. The space of sequence numbers is linearly ordered. The larger the sequence number, the more recent the advertisement.
.1.3.6.1.2.1.191.1.5.1.7,OSPFV3-MIB::ospfv3LinkLsdbAge,Unsigned32,read-only,,current,,This field is the age of the link state advertisement in seconds. The high-order bit of the LS age field is considered the DoNotAge bit for support of on-demand circuits.
.1.3.6.1.2.1.191.1.5.1.8,OSPFV3-MIB::ospfv3LinkLsdbChecksum,Integer32,read-only,,current,,This field is the checksum of the complete contents of the advertisement, excepting the age field. The age field is excepted so that an advertisement's age can be incremented without updating the checksum. The checksum used is the same that is used for ISO connectionless datagrams; it is commonly referred to as the Fletcher checksum.
.1.3.6.1.2.1.191.1.5.1.9,OSPFV3-MIB::ospfv3LinkLsdbAdvertisement,OCTET,read-only,,current,,The entire link state advertisement, including its header.
.1.3.6.1.2.1.191.1.5.1.10,OSPFV3-MIB::ospfv3LinkLsdbTypeKnown,INTEGER,read-only,,current,true(1):false(2),The value true (1) indicates that the LSA type is recognized by this router.
.1.3.6.1.2.1.191.1.6,OSPFV3-MIB::ospfv3HostTable,,not-accessible,,current,,The Host/Metric Table indicates what hosts are directly attached to the router and their corresponding metrics.
.1.3.6.1.2.1.191.1.6.1,OSPFV3-MIB::ospfv3HostEntry,,not-accessible,ospfv3HostAddressType:ospfv3HostAddress,current,,A metric to be advertised when a given host is reachable. The information in this table is persistent, and when written, the entity SHOULD save the change to non-volatile storage.
.1.3.6.1.2.1.191.1.6.1.1,OSPFV3-MIB::ospfv3HostAddressType,INTEGER,not-accessible,,current,unknown(0):ipv4(1):ipv6(2):ipv4z(3):ipv6z(4):dns(16),The address type of ospfv3HostAddress. Only IPv6 global address type is expected.
.1.3.6.1.2.1.191.1.6.1.2,OSPFV3-MIB::ospfv3HostAddress,OCTET,not-accessible,,current,,The IPv6 address of the host. Must be an IPv6 global address.
.1.3.6.1.2.1.191.1.6.1.3,OSPFV3-MIB::ospfv3HostMetric,Integer32,read-create,,current,,The metric to be advertised.
.1.3.6.1.2.1.191.1.6.1.4,OSPFV3-MIB::ospfv3HostRowStatus,INTEGER,read-create,,current,active(1):notInService(2):notReady(3):createAndGo(4):createAndWait(5):destroy(6),This object permits management of the table by facilitating actions such as row creation, construction, and destruction. The value of this object has no effect on whether other objects in this conceptual row can be modified.
.1.3.6.1.2.1.191.1.6.1.5,OSPFV3-MIB::ospfv3HostAreaID,Unsigned32,read-create,,current,,The Area the host entry is to be found within. By default, the area for the subsuming OSPFv3 interface, or Area 0 if there is no subsuming interface.
.1.3.6.1.2.1.191.1.7,OSPFV3-MIB::ospfv3IfTable,,not-accessible,,current,,The OSPFv3 Interface Table describes the interfaces from the viewpoint of OSPFv3.
.1.3.6.1.2.1.191.1.7.1,OSPFV3-MIB::ospfv3IfEntry,,not-accessible,ospfv3IfIndex:ospfv3IfInstId,current,,The OSPFv3 Interface Entry describes one interface from the viewpoint of OSPFv3. The information in this table is persistent, and when written, the entity SHOULD save the change to non-volatile storage.
.1.3.6.1.2.1.191.1.7.1.1,OSPFV3-MIB::ospfv3IfIndex,Integer32,not-accessible,,current,,The interface index of this OSPFv3 interface. It corresponds to the interface index of the IPv6 interface on which OSPFv3 is configured.
.1.3.6.1.2.1.191.1.7.1.2,OSPFV3-MIB::ospfv3IfInstId,Unsigned32,not-accessible,,current,,Enables multiple interface instances of OSPFv3 to be run over a single link. Each interface instance would be assigned a separate ID. This ID has local link significance only.
.1.3.6.1.2.1.191.1.7.1.3,OSPFV3-MIB::ospfv3IfAreaId,Unsigned32,read-create,,current,,A 32-bit integer uniquely identifying the area to which the interface connects. Area ID 0 is used for the OSPFv3 backbone.
.1.3.6.1.2.1.191.1.7.1.4,OSPFV3-MIB::ospfv3IfType,INTEGER,read-create,,current,broadcast(1):nbma(2):pointToPoint(3):pointToMultipoint(5),The OSPFv3 interface type.
.1.3.6.1.2.1.191.1.7.1.5,OSPFV3-MIB::ospfv3IfAdminStatus,INTEGER,read-create,,current,enabled(1):disabled(2),The OSPFv3 interface's administrative status. The value formed on the interface; the interface will be advertised as an internal route to some area. The value 'disabled' denotes that the interface is external to OSPFv3. Note that a value of 'disabled' for the object ospfv3AdminStatus will override a value of 'enabled' for the interface.
.1.3.6.1.2.1.191.1.7.1.6,OSPFV3-MIB::ospfv3IfRtrPriority,Integer32,read-create,,current,,The priority of this interface. Used in multi-access networks, this field is used in the designated-router election algorithm. The value 0 signifies that the router is not eligible to become the Designated Router on this particular network. In the event of a tie in this value, routers will use their Router ID as a tie breaker.
.1.3.6.1.2.1.191.1.7.1.7,OSPFV3-MIB::ospfv3IfTransitDelay,Unsigned32,read-create,,current,,The estimated number of seconds it takes to transmit a Link State Update packet over this interface. LSAs contained in the update packet must have their age incremented by this amount before transmission. This value should take into account the transmission and propagation delays of the interface.
.1.3.6.1.2.1.191.1.7.1.8,OSPFV3-MIB::ospfv3IfRetransInterval,Unsigned32,read-create,,current,,The number of seconds between link state advertisement retransmissions for adjacencies belonging to this interface. This value is also used when retransmitting database description and Link State Request packets.
.1.3.6.1.2.1.191.1.7.1.9,OSPFV3-MIB::ospfv3IfHelloInterval,Integer32,read-create,,current,,The length of time, in seconds, between the Hello packets that the router sends on the interface. This value must be the same for all routers attached to a common network.
.1.3.6.1.2.1.191.1.7.1.10,OSPFV3-MIB::ospfv3IfRtrDeadInterval,Unsigned32,read-create,,current,,The number of seconds that a router's Hello packets have not been seen before its neighbors declare the router down on the interface. This should be some multiple of the Hello interval. This value must be the same for all routers attached to a common network.
.1.3.6.1.2.1.191.1.7.1.11,OSPFV3-MIB::ospfv3IfPollInterval,Unsigned32,read-create,,current,,The larger time interval, in seconds, between the Hello packets sent to an inactive, non-broadcast multi-access neighbor.
.1.3.6.1.2.1.191.1.7.1.12,OSPFV3-MIB::ospfv3IfState,INTEGER,read-only,,current,down(1):loopback(2):waiting(3):pointToPoint(4):designatedRouter(5):backupDesignatedRouter(6):otherDesignatedRouter(7):standby(8),The OSPFv3 interface state. An interface may be in standby state if there are multiple interfaces on the link and another interface is active. The interface may be in Down state if the underlying IPv6 interface is down or if the admin status is 'disabled' either globally or for the interface.
.1.3.6.1.2.1.191.1.7.1.13,OSPFV3-MIB::ospfv3IfDesignatedRouter,Unsigned32,read-only,,current,,The Router ID of the Designated Router.
.1.3.6.1.2.1.191.1.7.1.14,OSPFV3-MIB::ospfv3IfBackupDesignatedRouter,Unsigned32,read-only,,current,,The Router ID of the Backup Designated Router.
.1.3.6.1.2.1.191.1.7.1.15,OSPFV3-MIB::ospfv3IfEvents,Counter32,read-only,,current,,The number of times this OSPFv3 interface has changed its state or an error has occurred. Discontinuities in the value of this counter can occur at re-initialization of the management system and at other times as indicated by the value of ospfv3DiscontinuityTime.
.1.3.6.1.2.1.191.1.7.1.16,OSPFV3-MIB::ospfv3IfRowStatus,INTEGER,read-create,,current,active(1):notInService(2):notReady(3):createAndGo(4):createAndWait(5):destroy(6),This object permits management of the table by facilitating actions such as row creation, construction, and destruction. The value of this object has no effect on whether other objects in this conceptual row can be modified.
.1.3.6.1.2.1.191.1.7.1.17,OSPFV3-MIB::ospfv3IfDemand,INTEGER,read-create,,current,true(1):false(2),Indicates whether Demand OSPFv3 procedures (Hello suppression to FULL neighbors and setting the DoNotAge flag on propagated LSAs) should be performed on this interface.
.1.3.6.1.2.1.191.1.7.1.18,OSPFV3-MIB::ospfv3IfMetricValue,Integer32,read-create,,current,,The metric assigned to this interface. The default value of the metric is 'Reference Bandwidth / ifSpeed'. The value of the reference bandwidth can be set in the ospfv3ReferenceBandwidth object.
.1.3.6.1.2.1.191.1.7.1.19,OSPFV3-MIB::ospfv3IfLinkScopeLsaCount,Gauge32,read-only,,current,,The total number of Link-scope link state advertisements in this link's link state database.
.1.3.6.1.2.1.191.1.7.1.20,OSPFV3-MIB::ospfv3IfLinkLsaCksumSum,Unsigned32,read-only,,current,,The 32-bit unsigned sum of the Link-scope link state advertisements' LS checksums contained in this link's link state database. The sum can be used to determine if there has been a change in a router's link state database or to compare the link state database of two routers.
.1.3.6.1.2.1.191.1.7.1.21,OSPFV3-MIB::ospfv3IfDemandNbrProbe,INTEGER,read-create,,current,true(1):false(2),Indicates whether or not neighbor probing is enabled to determine whether or not the neighbor is inactive. Neighbor probing is disabled by default.
.1.3.6.1.2.1.191.1.7.1.22,OSPFV3-MIB::ospfv3IfDemandNbrProbeRetransLimit,Unsigned32,read-create,,current,,The number of consecutive LSA retransmissions before the neighbor is deemed inactive and the neighbor adjacency is brought down.
.1.3.6.1.2.1.191.1.7.1.23,OSPFV3-MIB::ospfv3IfDemandNbrProbeInterval,Unsigned32,read-create,,current,,Defines how often the neighbor will be probed.
.1.3.6.1.2.1.191.1.7.1.24,OSPFV3-MIB::ospfv3IfTEDisabled,INTEGER,read-create,,current,true(1):false(2),Indicates whether or not traffic engineering is disabled on the interface when traffic engineering is enabled in the area where the interface is attached. The object is set to the value true (1) to disable traffic engineering on the interface. Traffic engineering is enabled by default on the interface when traffic engineering is enabled in the area where the interface is attached.
.1.3.6.1.2.1.191.1.7.1.25,OSPFV3-MIB::ospfv3IfLinkLSASuppression,INTEGER,read-create,,current,true(1):false(2),Specifies whether or not link LSA origination is suppressed for broadcast or NBMA interface types. The object is set to value true (1) to suppress the origination.
.1.3.6.1.2.1.191.1.8,OSPFV3-MIB::ospfv3VirtIfTable,,not-accessible,,current,,Information about this router's virtual interfaces that the OSPFv3 Process is configured to carry on.
.1.3.6.1.2.1.191.1.8.1,OSPFV3-MIB::ospfv3VirtIfEntry,,not-accessible,ospfv3VirtIfAreaId:ospfv3VirtIfNeighbor,current,,Information about a single virtual interface. The information in this table is persistent, and when written, the entity SHOULD save the change to non-volatile storage.
.1.3.6.1.2.1.191.1.8.1.1,OSPFV3-MIB::ospfv3VirtIfAreaId,Unsigned32,not-accessible,,current,,The transit area that the virtual link traverses. By definition, this is not Area 0.
.1.3.6.1.2.1.191.1.8.1.2,OSPFV3-MIB::ospfv3VirtIfNeighbor,Unsigned32,not-accessible,,current,,The Router ID of the virtual neighbor.
.1.3.6.1.2.1.191.1.8.1.3,OSPFV3-MIB::ospfv3VirtIfIndex,Integer32,read-only,,current,,The local interface index assigned by the OSPFv3 Process to this OSPFv3 virtual interface. It is advertised in Hellos sent over the virtual link and in the router's router-LSAs.
.1.3.6.1.2.1.191.1.8.1.4,OSPFV3-MIB::ospfv3VirtIfInstId,Unsigned32,read-only,,current,,The local Interface Instance ID assigned by the OSPFv3 Process to this OSPFv3 virtual interface.
.1.3.6.1.2.1.191.1.8.1.5,OSPFV3-MIB::ospfv3VirtIfTransitDelay,Unsigned32,read-create,,current,,The estimated number of seconds it takes to transmit a Link State Update packet over this interface.
.1.3.6.1.2.1.191.1.8.1.6,OSPFV3-MIB::ospfv3VirtIfRetransInterval,Unsigned32,read-create,,current,,The number of seconds between link state advertisement retransmissions for adjacencies belonging to this interface. This value is also used when retransmitting database description and Link State Request packets. This value should be well over the expected round-trip time.
.1.3.6.1.2.1.191.1.8.1.7,OSPFV3-MIB::ospfv3VirtIfHelloInterval,Integer32,read-create,,current,,The length of time, in seconds, between the Hello packets that the router sends on the interface. This value must be the same for the virtual neighbor.
.1.3.6.1.2.1.191.1.8.1.8,OSPFV3-MIB::ospfv3VirtIfRtrDeadInterval,Unsigned32,read-create,,current,,The number of seconds that a router's Hello packets have not been seen before its neighbors declare the router down. This should be some multiple of the Hello interval. This value must be the same for the virtual neighbor.
.1.3.6.1.2.1.191.1.8.1.9,OSPFV3-MIB::ospfv3VirtIfState,INTEGER,read-only,,current,down(1):pointToPoint(4),OSPF virtual interface states. The same encoding as the ospfV3IfTable is used.
.1.3.6.1.2.1.191.1.8.1.10,OSPFV3-MIB::ospfv3VirtIfEvents,Counter32,read-only,,current,,The number of state changes or error events on this virtual link. Discontinuities in the value of this counter can occur at re-initialization of the management system and at other times as indicated by the value of ospfv3DiscontinuityTime.
.1.3.6.1.2.1.191.1.8.1.11,OSPFV3-MIB::ospfv3VirtIfRowStatus,INTEGER,read-create,,current,active(1):notInService(2):notReady(3):createAndGo(4):createAndWait(5):destroy(6),This object permits management of the table by facilitating actions such as row creation, construction, and destruction. The value of this object has no effect on whether other objects in this conceptual row can be modified.
.1.3.6.1.2.1.191.1.8.1.12,OSPFV3-MIB::ospfv3VirtIfLinkScopeLsaCount,Gauge32,read-only,,current,,The total number of Link-scope link state advertisements in this virtual link's link state database.
.1.3.6.1.2.1.191.1.8.1.13,OSPFV3-MIB::ospfv3VirtIfLinkLsaCksumSum,Unsigned32,read-only,,current,,The 32-bit unsigned sum of the Link-scope link state advertisements' LS checksums contained in this virtual link's link state database. The sum can be used to determine if there has been a change in a router's link state database or to compare the link state database of two routers.
.1.3.6.1.2.1.191.1.9,OSPFV3-MIB::ospfv3NbrTable,,not-accessible,,current,,A table describing all neighbors in the locality of the OSPFv3 router.
.1.3.6.1.2.1.191.1.9.1,OSPFV3-MIB::ospfv3NbrEntry,,not-accessible,ospfv3NbrIfIndex:ospfv3NbrIfInstId:ospfv3NbrRtrId,current,,The information regarding a single neighbor.
.1.3.6.1.2.1.191.1.9.1.1,OSPFV3-MIB::ospfv3NbrIfIndex,Integer32,not-accessible,,current,,The Local Link ID of the link over which the neighbor can be reached.
.1.3.6.1.2.1.191.1.9.1.2,OSPFV3-MIB::ospfv3NbrIfInstId,Unsigned32,not-accessible,,current,,Interface instance over which the neighbor can be reached. This ID has local link significance only.
.1.3.6.1.2.1.191.1.9.1.3,OSPFV3-MIB::ospfv3NbrRtrId,Unsigned32,not-accessible,,current,,A 32-bit unsigned integer uniquely identifying the neighboring router in the Autonomous System.
.1.3.6.1.2.1.191.1.9.1.4,OSPFV3-MIB::ospfv3NbrAddressType,INTEGER,read-only,,current,unknown(0):ipv4(1):ipv6(2):ipv4z(3):ipv6z(4):dns(16),The address type of ospfv3NbrAddress. Only IPv6 addresses without zone index are expected.
.1.3.6.1.2.1.191.1.9.1.5,OSPFV3-MIB::ospfv3NbrAddress,OCTET,read-only,,current,,The IPv6 address of the neighbor associated with the local link.
.1.3.6.1.2.1.191.1.9.1.6,OSPFV3-MIB::ospfv3NbrOptions,Integer32,read-only,,current,,A bit mask corresponding to the neighbor's options field.
.1.3.6.1.2.1.191.1.9.1.7,OSPFV3-MIB::ospfv3NbrPriority,Integer32,read-only,,current,,The priority of this neighbor in the designated- router election algorithm. The value 0 signifies that the neighbor is not eligible to become the Designated Router on this particular network.
.1.3.6.1.2.1.191.1.9.1.8,OSPFV3-MIB::ospfv3NbrState,INTEGER,read-only,,current,down(1):attempt(2):init(3):twoWay(4):exchangeStart(5):exchange(6):loading(7):full(8),The state of the relationship with this neighbor.
.1.3.6.1.2.1.191.1.9.1.9,OSPFV3-MIB::ospfv3NbrEvents,Counter32,read-only,,current,,The number of times this neighbor relationship has changed state or an error has occurred. Discontinuities in the value of this counter can occur at re-initialization of the management system and at other times as indicated by the value of ospfv3DiscontinuityTime.
.1.3.6.1.2.1.191.1.9.1.10,OSPFV3-MIB::ospfv3NbrLsRetransQLen,Gauge32,read-only,,current,,The current length of the retransmission queue.
.1.3.6.1.2.1.191.1.9.1.11,OSPFV3-MIB::ospfv3NbrHelloSuppressed,INTEGER,read-only,,current,true(1):false(2),Indicates whether Hellos are being suppressed to the neighbor.
.1.3.6.1.2.1.191.1.9.1.12,OSPFV3-MIB::ospfv3NbrIfId,Integer32,read-only,,current,,The Interface ID that the neighbor advertises in its Hello packets on this link, that is, the neighbor's local interface index.
.1.3.6.1.2.1.191.1.9.1.13,OSPFV3-MIB::ospfv3NbrRestartHelperStatus,INTEGER,read-only,,current,notHelping(1):helping(2),Indicates whether the router is acting as a graceful restart helper for the neighbor.
.1.3.6.1.2.1.191.1.9.1.14,OSPFV3-MIB::ospfv3NbrRestartHelperAge,Unsigned32,read-only,,current,,Remaining time in current OSPF graceful restart interval, if the router is acting as a restart helper for the neighbor.
.1.3.6.1.2.1.191.1.9.1.15,OSPFV3-MIB::ospfv3NbrRestartHelperExitReason,INTEGER,read-only,,current,none(1):inProgress(2):completed(3):timedOut(4):topologyChanged(5),Describes the outcome of the last attempt at acting as a graceful restart helper for the neighbor. none: no restart has yet been attempted. inProgress: a restart attempt is currently underway. completed: the last restart completed successfully. timedOut: the last restart timed out. topologyChanged: the last restart was aborted due to a topology change.
.1.3.6.1.2.1.191.1.10,OSPFV3-MIB::ospfv3CfgNbrTable,,not-accessible,,current,,A table describing all configured neighbors. The Configured Neighbors table just gives OSPFv3 information for sending OSPFv3 packets to potential neighbors and is typically used on NBMA and Point-to-Multipoint networks. Once a Hello is received from a neighbor in the Configured Neighbor table, an entry for that neighbor is created in the Neighbor table and adjacency state is maintained there. Neighbors on multi-access or Point-to-Point networks can use multicast addressing, so only Neighbor table entries are created for them.
.1.3.6.1.2.1.191.1.10.1,OSPFV3-MIB::ospfv3CfgNbrEntry,,not-accessible,ospfv3CfgNbrIfIndex:ospfv3CfgNbrIfInstId:ospfv3CfgNbrAddressType:ospfv3CfgNbrAddress,current,,The information regarding a single configured neighbor. The information in this table is persistent, and when written, the entity SHOULD save the change to non-volatile storage.
.1.3.6.1.2.1.191.1.10.1.1,OSPFV3-MIB::ospfv3CfgNbrIfIndex,Integer32,not-accessible,,current,,The Local Link ID of the link over which the neighbor can be reached.
.1.3.6.1.2.1.191.1.10.1.2,OSPFV3-MIB::ospfv3CfgNbrIfInstId,Unsigned32,not-accessible,,current,,Interface instance over which the neighbor can be reached. This ID has local link significance only.
.1.3.6.1.2.1.191.1.10.1.3,OSPFV3-MIB::ospfv3CfgNbrAddressType,INTEGER,not-accessible,,current,unknown(0):ipv4(1):ipv6(2):ipv4z(3):ipv6z(4):dns(16),The address type of ospfv3NbrAddress. Only IPv6 addresses without zone index are expected.
.1.3.6.1.2.1.191.1.10.1.4,OSPFV3-MIB::ospfv3CfgNbrAddress,OCTET,not-accessible,,current,,The IPv6 address of the neighbor associated with the local link.
.1.3.6.1.2.1.191.1.10.1.5,OSPFV3-MIB::ospfv3CfgNbrPriority,Integer32,read-create,,current,,The priority of this neighbor in the designated- router election algorithm. The value 0 signifies that the neighbor is not eligible to become the Designated Router on this particular network.
.1.3.6.1.2.1.191.1.10.1.6,OSPFV3-MIB::ospfv3CfgNbrRowStatus,INTEGER,read-create,,current,active(1):notInService(2):notReady(3):createAndGo(4):createAndWait(5):destroy(6),This object permits management of the table by facilitating actions such as row creation, construction, and destruction. The value of this object has no effect on whether other objects in this conceptual row can be modified.
.1.3.6.1.2.1.191.1.11,OSPFV3-MIB::ospfv3VirtNbrTable,,not-accessible,,current,,A table describing all virtual neighbors.
.1.3.6.1.2.1.191.1.11.1,OSPFV3-MIB::ospfv3VirtNbrEntry,,not-accessible,ospfv3VirtNbrArea:ospfv3VirtNbrRtrId,current,,Virtual neighbor information.
.1.3.6.1.2.1.191.1.11.1.1,OSPFV3-MIB::ospfv3VirtNbrArea,Unsigned32,not-accessible,,current,,The transit area Identifier.
.1.3.6.1.2.1.191.1.11.1.2,OSPFV3-MIB::ospfv3VirtNbrRtrId,Unsigned32,not-accessible,,current,,A 32-bit integer uniquely identifying the neighboring router in the Autonomous System.
.1.3.6.1.2.1.191.1.11.1.3,OSPFV3-MIB::ospfv3VirtNbrIfIndex,Integer32,read-only,,current,,The local Interface ID for the virtual link over which the neighbor can be reached.
.1.3.6.1.2.1.191.1.11.1.4,OSPFV3-MIB::ospfv3VirtNbrIfInstId,Unsigned32,read-only,,current,,The interface instance for the virtual link over which the neighbor can be reached.
.1.3.6.1.2.1.191.1.11.1.5,OSPFV3-MIB::ospfv3VirtNbrAddressType,INTEGER,read-only,,current,unknown(0):ipv4(1):ipv6(2):ipv4z(3):ipv6z(4):dns(16),The address type of ospfv3VirtNbrAddress. Only IPv6 addresses without zone index are expected.
.1.3.6.1.2.1.191.1.11.1.6,OSPFV3-MIB::ospfv3VirtNbrAddress,OCTET,read-only,,current,,The IPv6 address advertised by this virtual neighbor. It must be a global scope address.
.1.3.6.1.2.1.191.1.11.1.7,OSPFV3-MIB::ospfv3VirtNbrOptions,Integer32,read-only,,current,,A bit mask corresponding to the neighbor's options field.
.1.3.6.1.2.1.191.1.11.1.8,OSPFV3-MIB::ospfv3VirtNbrState,INTEGER,read-only,,current,down(1):attempt(2):init(3):twoWay(4):exchangeStart(5):exchange(6):loading(7):full(8),The state of the virtual neighbor relationship.
.1.3.6.1.2.1.191.1.11.1.9,OSPFV3-MIB::ospfv3VirtNbrEvents,Counter32,read-only,,current,,The number of times this virtual link has changed its state or an error has occurred. Discontinuities in the value of this counter can occur at re-initialization of the management system and at other times as indicated by the value of ospfv3DiscontinuityTime.
.1.3.6.1.2.1.191.1.11.1.10,OSPFV3-MIB::ospfv3VirtNbrLsRetransQLen,Gauge32,read-only,,current,,The current length of the retransmission queue.
.1.3.6.1.2.1.191.1.11.1.11,OSPFV3-MIB::ospfv3VirtNbrHelloSuppressed,INTEGER,read-only,,current,true(1):false(2),Indicates whether Hellos are being suppressed to the neighbor.
.1.3.6.1.2.1.191.1.11.1.12,OSPFV3-MIB::ospfv3VirtNbrIfId,Integer32,read-only,,current,,The Interface ID that the neighbor advertises in its Hello packets on this virtual link, that is, the neighbor's local Interface ID.
.1.3.6.1.2.1.191.1.11.1.13,OSPFV3-MIB::ospfv3VirtNbrRestartHelperStatus,INTEGER,read-only,,current,notHelping(1):helping(2),Indicates whether the router is acting as a graceful restart helper for the neighbor.
.1.3.6.1.2.1.191.1.11.1.14,OSPFV3-MIB::ospfv3VirtNbrRestartHelperAge,Unsigned32,read-only,,current,,Remaining time in the current OSPF graceful restart interval, if the router is acting as a restart helper for the neighbor.
.1.3.6.1.2.1.191.1.11.1.15,OSPFV3-MIB::ospfv3VirtNbrRestartHelperExitReason,INTEGER,read-only,,current,none(1):inProgress(2):completed(3):timedOut(4):topologyChanged(5),Describes the outcome of the last attempt at acting as a graceful restart helper for the neighbor. none: no restart has yet been attempted. inProgress: a restart attempt is currently underway. completed: the last restart completed successfully. timedOut: the last restart timed out. topologyChanged: the last restart was aborted due to a topology change.
.1.3.6.1.2.1.191.1.12,OSPFV3-MIB::ospfv3AreaAggregateTable,,not-accessible,,current,,The Area Aggregate Table acts as an adjunct to the Area Table. It describes those address aggregates that are configured to be propagated from an area. Its purpose is to reduce the amount of information that is known beyond an area's borders. A range of IPv6 prefixes specified by a prefix / prefix length pair. Note that if ranges are configured such that one range subsumes another range, the most specific match is the preferred one.
.1.3.6.1.2.1.191.1.12.1,OSPFV3-MIB::ospfv3AreaAggregateEntry,,not-accessible,ospfv3AreaAggregateAreaID:ospfv3AreaAggregateAreaLsdbType:ospfv3AreaAggregatePrefixType:ospfv3AreaAggregatePrefix:ospfv3AreaAggregatePrefixLength,current,,A single area aggregate entry. Information in this table is persistent, and when this object is written, the entity SHOULD save the change to non-volatile storage.
.1.3.6.1.2.1.191.1.12.1.1,OSPFV3-MIB::ospfv3AreaAggregateAreaID,Unsigned32,not-accessible,,current,,The area the Address Aggregate is to be found within.
.1.3.6.1.2.1.191.1.12.1.2,OSPFV3-MIB::ospfv3AreaAggregateAreaLsdbType,INTEGER,not-accessible,,current,interAreaPrefixLsa(8195):nssaExternalLsa(8199),The type of the Address Aggregate. This field specifies the Area LSDB type that this Address Aggregate applies to.
.1.3.6.1.2.1.191.1.12.1.3,OSPFV3-MIB::ospfv3AreaAggregatePrefixType,INTEGER,not-accessible,,current,unknown(0):ipv4(1):ipv6(2):ipv4z(3):ipv6z(4):dns(16),The prefix type of ospfv3AreaAggregatePrefix. Only IPv6 addresses are expected.
.1.3.6.1.2.1.191.1.12.1.4,OSPFV3-MIB::ospfv3AreaAggregatePrefix,OCTET,not-accessible,,current,,The IPv6 prefix.
.1.3.6.1.2.1.191.1.12.1.5,OSPFV3-MIB::ospfv3AreaAggregatePrefixLength,Unsigned32,not-accessible,,current,,The length of the prefix (in bits). A prefix can not be shorter than 3 bits.
.1.3.6.1.2.1.191.1.12.1.6,OSPFV3-MIB::ospfv3AreaAggregateRowStatus,INTEGER,read-create,,current,active(1):notInService(2):notReady(3):createAndGo(4):createAndWait(5):destroy(6),This object permits management of the table by facilitating actions such as row creation, construction, and destruction. The value of this object has no effect on whether other objects in this conceptual row can be modified.
.1.3.6.1.2.1.191.1.12.1.7,OSPFV3-MIB::ospfv3AreaAggregateEffect,INTEGER,read-create,,current,advertiseMatching(1):doNotAdvertiseMatching(2),Prefixes subsumed by ranges will either trigger the advertisement of the indicated aggregate (advertiseMatching) or result in the prefix not being advertised at all outside the area.
.1.3.6.1.2.1.191.1.12.1.8,OSPFV3-MIB::ospfv3AreaAggregateRouteTag,Unsigned32,read-create,,current,,This tag is advertised only in the summarized As-External LSA when summarizing from NSSA-LSAs to AS-External-LSAs.
.1.3.6.1.2.1.191.1.13,OSPFV3-MIB::ospfv3VirtLinkLsdbTable,,not-accessible,,current,,The OSPFv3 Process's Link-scope LSDB for virtual interfaces. The LSDB contains the Link-scope link state advertisements from virtual interfaces.
.1.3.6.1.2.1.191.1.13.1,OSPFV3-MIB::ospfv3VirtLinkLsdbEntry,,not-accessible,ospfv3VirtLinkLsdbIfAreaId:ospfv3VirtLinkLsdbIfNeighbor:ospfv3VirtLinkLsdbType:ospfv3VirtLinkLsdbRouterId:ospfv3VirtLinkLsdbLsid,current,,A single Link-scope link state advertisement for a virtual interface.
.1.3.6.1.2.1.191.1.13.1.1,OSPFV3-MIB::ospfv3VirtLinkLsdbIfAreaId,Unsigned32,not-accessible,,current,,The transit area that the virtual link traverses. By definition, this is not Area 0.
.1.3.6.1.2.1.191.1.13.1.2,OSPFV3-MIB::ospfv3VirtLinkLsdbIfNeighbor,Unsigned32,not-accessible,,current,,The Router ID of the virtual neighbor.
.1.3.6.1.2.1.191.1.13.1.3,OSPFV3-MIB::ospfv3VirtLinkLsdbType,Unsigned32,not-accessible,,current,,The type of the link state advertisement. Each link state type has a separate advertisement format. Link-scope LSAs unrecognized by the router are also stored in this database.
.1.3.6.1.2.1.191.1.13.1.4,OSPFV3-MIB::ospfv3VirtLinkLsdbRouterId,Unsigned32,not-accessible,,current,,The 32-bit number that uniquely identifies the originating router in the Autonomous System.
.1.3.6.1.2.1.191.1.13.1.5,OSPFV3-MIB::ospfv3VirtLinkLsdbLsid,Unsigned32,not-accessible,,current,,The Link State ID is an LS type-specific field containing a unique identifier; it identifies the piece of the routing domain that is being described by the advertisement. In contrast to OSPFv2, the LSID has no addressing semantics.
.1.3.6.1.2.1.191.1.13.1.6,OSPFV3-MIB::ospfv3VirtLinkLsdbSequence,Integer32,read-only,,current,,The sequence number field is a signed 32-bit integer. It is used to detect old and duplicate link state advertisements. The space of sequence numbers is linearly ordered. The larger the sequence number, the more recent the advertisement.
.1.3.6.1.2.1.191.1.13.1.7,OSPFV3-MIB::ospfv3VirtLinkLsdbAge,Unsigned32,read-only,,current,,This field is the age of the link state advertisement in seconds. The high-order bit of the LS age field is considered the DoNotAge bit for support of on-demand circuits.
.1.3.6.1.2.1.191.1.13.1.8,OSPFV3-MIB::ospfv3VirtLinkLsdbChecksum,Integer32,read-only,,current,,This field is the checksum of the complete contents of the advertisement, excepting the age field. The age field is excepted so that an advertisement's age can be incremented without updating the checksum. The checksum used is the same that is used for ISO connectionless datagrams; it is commonly referred to as the Fletcher checksum.
.1.3.6.1.2.1.191.1.13.1.9,OSPFV3-MIB::ospfv3VirtLinkLsdbAdvertisement,OCTET,read-only,,current,,The entire link state advertisement, including its header.
.1.3.6.1.2.1.191.1.13.1.10,OSPFV3-MIB::ospfv3VirtLinkLsdbTypeKnown,INTEGER,read-only,,current,true(1):false(2),The value true (1) indicates that the LSA type is recognized by this router.
.1.3.6.1.2.1.191.1.14,OSPFV3-MIB::ospfv3NotificationEntry,,,,,,
.1.3.6.1.2.1.191.1.14.1,OSPFV3-MIB::ospfv3ConfigErrorType,INTEGER,accessible-for-notify,,current,badVersion(1):areaMismatch(2):unknownNbmaNbr(3):unknownVirtualNbr(4):helloIntervalMismatch(5):deadIntervalMismatch(6):optionMismatch(7):mtuMismatch(8):duplicateRouterId(9):noError(10),Potential types of configuration conflicts. Used by the ospfv3ConfigError and ospfv3ConfigVirtError notifications.
.1.3.6.1.2.1.191.1.14.2,OSPFV3-MIB::ospfv3PacketType,INTEGER,accessible-for-notify,,current,hello(1):dbDescript(2):lsReq(3):lsUpdate(4):lsAck(5):nullPacket(6),OSPFv3 packet types.
.1.3.6.1.2.1.191.1.14.3,OSPFV3-MIB::ospfv3PacketSrc,OCTET,accessible-for-notify,,current,,The IPv6 address of an inbound packet that cannot be identified by a neighbor instance. Only IPv6 addresses without zone index are expected.
.1.3.6.1.2.1.191.2,OSPFV3-MIB::ospfv3Conformance,,,,,,
.1.3.6.1.2.1.191.2.1,OSPFV3-MIB::ospfv3Groups,,,,,,
.1.3.6.1.2.1.191.2.1.1,OSPFV3-MIB::ospfv3BasicGroup,,,,,,These objects are used for managing/monitoring OSPFv3 global parameters.
.1.3.6.1.2.1.191.2.1.2,OSPFV3-MIB::ospfv3AreaGroup,,,,,,These objects are used for OSPFv3 systems supporting areas.
.1.3.6.1.2.1.191.2.1.3,OSPFV3-MIB::ospfv3AsLsdbGroup,,,,,,These objects are used for OSPFv3 systems that display their AS-scope link state database.
.1.3.6.1.2.1.191.2.1.4,OSPFV3-MIB::ospfv3AreaLsdbGroup,,,,,,These objects are used for OSPFv3 systems that display their Area-scope link state database.
.1.3.6.1.2.1.191.2.1.5,OSPFV3-MIB::ospfv3LinkLsdbGroup,,,,,,These objects are used for OSPFv3 systems that display their Link-scope link state database for non-virtual interfaces.
.1.3.6.1.2.1.191.2.1.6,OSPFV3-MIB::ospfv3HostGroup,,,,,,These objects are used for OSPFv3 systems that support attached hosts.
.1.3.6.1.2.1.191.2.1.7,OSPFV3-MIB::ospfv3IfGroup,,,,,,These interface objects are used for managing/monitoring OSPFv3 interfaces.
.1.3.6.1.2.1.191.2.1.8,OSPFV3-MIB::ospfv3VirtIfGroup,,,,,,These virtual interface objects are used for managing/monitoring OSPFv3 virtual interfaces.
.1.3.6.1.2.1.191.2.1.9,OSPFV3-MIB::ospfv3NbrGroup,,,,,,These neighbor objects are used for managing/monitoring OSPFv3 neighbors.
.1.3.6.1.2.1.191.2.1.10,OSPFV3-MIB::ospfv3CfgNbrGroup,,,,,,These configured neighbor objects are used for managing/monitoring OSPFv3-configured neighbors.
.1.3.6.1.2.1.191.2.1.11,OSPFV3-MIB::ospfv3VirtNbrGroup,,,,,,These virtual neighbor objects are used for managing/monitoring OSPFv3 virtual neighbors.
.1.3.6.1.2.1.191.2.1.12,OSPFV3-MIB::ospfv3AreaAggregateGroup,,,,,,These area aggregate objects are required for aggregating OSPFv3 prefixes for summarization across areas.
.1.3.6.1.2.1.191.2.1.13,OSPFV3-MIB::ospfv3VirtLinkLsdbGroup,,,,,,These objects are used for OSPFv3 systems that display their Link-scope link state database for virtual interfaces.
.1.3.6.1.2.1.191.2.1.14,OSPFV3-MIB::ospfv3NotificationObjectGroup,,,,,,These objects are used to record notification parameters.
.1.3.6.1.2.1.191.2.1.15,OSPFV3-MIB::ospfv3NotificationGroup,,,,,,This group is used for OSPFv3 notifications.
.1.3.6.1.2.1.191.2.2,OSPFV3-MIB::ospfv3Compliances,,,,,,
.1.3.6.1.2.1.191.2.2.1,OSPFV3-MIB::ospfv3FullCompliance,,,,,,The compliance statement
.1.3.6.1.2.1.191.2.2.2,OSPFV3-MIB::ospfv3ReadOnlyCompliance,,,,,,When this MIB module is implemented without support for read-create (i.e., in read-only mode), the implementation can claim read-only compliance. Such a device can then be monitored, but cannot be configured with this MIB.
.1.3.6.1.2.1.216,IANA-ENTITY-MIB::ianaEntityMIB,,,,,,This MIB module defines a TEXTUAL-CONVENTION that provides an indication of the general hardware type of a particular physical entity. Copyright (c) 2013 IETF Trust and the persons identified as authors of the code. All rights reserved. Redistribution and use in source and binary forms, with or without modification, is permitted pursuant to, and subject to the license terms contained in, the Simplified BSD License set forth in Section 4.c of the IETF Trust's Legal Provisions Relating to IETF Documents (http://trustee.ietf.org/license-info). The initial version of this MIB module was published in RFC 6933; for full legal notices see the RFC itself.
.1.3.6.1.2.1.217,UUID-TC-MIB::uuidTCMIB,,,,,,This MIB module defines TEXTUAL-CONVENTIONs representing Universally Unique IDentifiers (UUIDs). Copyright (c) 2013 IETF Trust and the persons identified as authors of the code. All rights reserved. Redistribution and use in source and binary forms, with or without modification, is permitted pursuant to, and subject to the license terms contained in, the Simplified BSD License set forth in Section 4.c of the IETF Trust's Legal Provisions Relating to IETF Documents (http://trustee.ietf.org/license-info).
.1.3.6.1.3,SNMPv2-SMI::experimental,,,,,,
.1.3.6.1.3.61,PIM-MIB::pimMIB,,,,,,The MIB module for management of PIM routers.
.1.3.6.1.3.61.1,PIM-MIB::pimMIBObjects,,,,,,
.1.3.6.1.3.61.1.0,PIM-MIB::pimTraps,,,,,,
.1.3.6.1.3.61.1.0.1,PIM-MIB::pimNeighborLoss,,,,,,A pimNeighborLoss trap signifies the loss of an adjacency with a neighbor. This trap should be generated when the neighbor timer expires, and the router has no other neighbors on the same interface with a lower IP address than itself.
.1.3.6.1.3.61.1.1,PIM-MIB::pim,,,,,,
.1.3.6.1.3.61.1.1.1,PIM-MIB::pimJoinPruneInterval,Integer32,read-write,,current,,The default interval at which periodic PIM-SM Join/Prune messages are to be sent.
.1.3.6.1.3.61.1.1.2,PIM-MIB::pimInterfaceTable,,not-accessible,,current,,The (conceptual) table listing the router's PIM interfaces. IGMP and PIM are enabled on all interfaces listed in this table.
.1.3.6.1.3.61.1.1.2.1,PIM-MIB::pimInterfaceEntry,,not-accessible,pimInterfaceIfIndex,current,,An entry (conceptual row) in the pimInterfaceTable.
.1.3.6.1.3.61.1.1.2.1.1,PIM-MIB::pimInterfaceIfIndex,Integer32,not-accessible,,current,,The ifIndex value of this PIM interface.
.1.3.6.1.3.61.1.1.2.1.2,PIM-MIB::pimInterfaceAddress,IpAddress,read-only,,current,,The IP address of the PIM interface.
.1.3.6.1.3.61.1.1.2.1.3,PIM-MIB::pimInterfaceNetMask,IpAddress,read-only,,current,,The network mask for the IP address of the PIM interface.
.1.3.6.1.3.61.1.1.2.1.4,PIM-MIB::pimInterfaceMode,INTEGER,read-create,,current,dense(1):sparse(2):sparseDense(3),The configured mode of this PIM interface. A value of sparseDense is only valid for PIMv1.
.1.3.6.1.3.61.1.1.2.1.5,PIM-MIB::pimInterfaceDR,IpAddress,read-only,,current,,The Designated Router on this PIM interface. For point-to- point interfaces, this object has the value 0.0.0.0.
.1.3.6.1.3.61.1.1.2.1.6,PIM-MIB::pimInterfaceHelloInterval,Integer32,read-create,,current,,The frequency at which PIM Hello messages are transmitted on this interface.
.1.3.6.1.3.61.1.1.2.1.7,PIM-MIB::pimInterfaceStatus,INTEGER,read-create,,current,active(1):notInService(2):notReady(3):createAndGo(4):createAndWait(5):destroy(6),The status of this entry. Creating the entry enables PIM on the interface; destroying the entry disables PIM on the interface.
.1.3.6.1.3.61.1.1.2.1.8,PIM-MIB::pimInterfaceJoinPruneInterval,Integer32,read-create,,current,,The frequency at which PIM Join/Prune messages are transmitted on this PIM interface. The default value of this object is the pimJoinPruneInterval.
.1.3.6.1.3.61.1.1.2.1.9,PIM-MIB::pimInterfaceCBSRPreference,Integer32,read-create,,current,,The preference value for the local interface as a candidate bootstrap router. The value of -1 is used to indicate that the local interface is not a candidate BSR interface.
.1.3.6.1.3.61.1.1.3,PIM-MIB::pimNeighborTable,,not-accessible,,current,,The (conceptual) table listing the router's PIM neighbors.
.1.3.6.1.3.61.1.1.3.1,PIM-MIB::pimNeighborEntry,,not-accessible,pimNeighborAddress,current,,An entry (conceptual row) in the pimNeighborTable.
.1.3.6.1.3.61.1.1.3.1.1,PIM-MIB::pimNeighborAddress,IpAddress,not-accessible,,current,,The IP address of the PIM neighbor for which this entry contains information.
.1.3.6.1.3.61.1.1.3.1.2,PIM-MIB::pimNeighborIfIndex,Integer32,read-only,,current,,The value of ifIndex for the interface used to reach this PIM neighbor.
.1.3.6.1.3.61.1.1.3.1.3,PIM-MIB::pimNeighborUpTime,TimeTicks,read-only,,current,,The time since this PIM neighbor (last) became a neighbor of the local router.
.1.3.6.1.3.61.1.1.3.1.4,PIM-MIB::pimNeighborExpiryTime,TimeTicks,read-only,,current,,The minimum time remaining before this PIM neighbor will be aged out.
.1.3.6.1.3.61.1.1.3.1.5,PIM-MIB::pimNeighborMode,INTEGER,read-only,,deprecated,dense(1):sparse(2),The active PIM mode of this neighbor. This object is deprecated for PIMv2 routers since all neighbors on the interface must be either dense or sparse as determined by the protocol running on the interface.
.1.3.6.1.3.61.1.1.4,PIM-MIB::pimIpMRouteTable,,not-accessible,,current,,The (conceptual) table listing PIM-specific information on a subset of the rows of the ipMRouteTable defined in the IP Multicast MIB.
.1.3.6.1.3.61.1.1.4.1,PIM-MIB::pimIpMRouteEntry,,not-accessible,ipMRouteGroup:ipMRouteSource:ipMRouteSourceMask,current,,An entry (conceptual row) in the pimIpMRouteTable. There is one entry per entry in the ipMRouteTable whose incoming interface is running PIM.
.1.3.6.1.3.61.1.1.4.1.1,PIM-MIB::pimIpMRouteUpstreamAssertTimer,TimeTicks,read-only,,current,,The time remaining before the router changes its upstream neighbor back to its RPF neighbor. This timer is called the Assert timer in the PIM Sparse and Dense mode specification. A value of 0 indicates that no Assert has changed the upstream neighbor away from the RPF neighbor.
.1.3.6.1.3.61.1.1.4.1.2,PIM-MIB::pimIpMRouteAssertMetric,Integer32,read-only,,current,,The metric advertised by the assert winner on the upstream interface, or 0 if no such assert is in received.
.1.3.6.1.3.61.1.1.4.1.3,PIM-MIB::pimIpMRouteAssertMetricPref,Integer32,read-only,,current,,The preference advertised by the assert winner on the upstream interface, or 0 if no such assert is in effect.
.1.3.6.1.3.61.1.1.4.1.4,PIM-MIB::pimIpMRouteAssertRPTBit,INTEGER,read-only,,current,true(1):false(2),The value of the RPT-bit advertised by the assert winner on the upstream interface, or false if no such assert is in effect.
.1.3.6.1.3.61.1.1.4.1.5,PIM-MIB::pimIpMRouteFlags,BITS,read-only,,current,rpt(0):spt(1),This object describes PIM-specific flags related to a multicast state entry. See the PIM Sparse Mode specification for the meaning of the RPT and SPT bits.
.1.3.6.1.3.61.1.1.5,PIM-MIB::pimRPTable,,not-accessible,,deprecated,,The (conceptual) table listing PIM version 1 information for the Rendezvous Points (RPs) for IP multicast groups. This table is deprecated since its function is replaced by the pimRPSetTable for PIM version 2.
.1.3.6.1.3.61.1.1.5.1,PIM-MIB::pimRPEntry,,not-accessible,pimRPGroupAddress:pimRPAddress,deprecated,,An entry (conceptual row) in the pimRPTable. There is one entry per RP address for each IP multicast group.
.1.3.6.1.3.61.1.1.5.1.1,PIM-MIB::pimRPGroupAddress,IpAddress,not-accessible,,deprecated,,The IP multicast group address for which this entry contains information about an RP.
.1.3.6.1.3.61.1.1.5.1.2,PIM-MIB::pimRPAddress,IpAddress,not-accessible,,deprecated,,The unicast address of the RP.
.1.3.6.1.3.61.1.1.5.1.3,PIM-MIB::pimRPState,INTEGER,read-only,,deprecated,up(1):down(2),The state of the RP.
.1.3.6.1.3.61.1.1.5.1.4,PIM-MIB::pimRPStateTimer,TimeTicks,read-only,,deprecated,,The minimum time remaining before the next state change. When pimRPState is up, this is the minimum time which must expire until it can be declared down. When pimRPState is down, this is the time until it will be declared up (in order to retry).
.1.3.6.1.3.61.1.1.5.1.5,PIM-MIB::pimRPLastChange,TimeTicks,read-only,,deprecated,,The value of sysUpTime at the time when the corresponding instance of pimRPState last changed its value.
.1.3.6.1.3.61.1.1.5.1.6,PIM-MIB::pimRPRowStatus,INTEGER,read-create,,deprecated,active(1):notInService(2):notReady(3):createAndGo(4):createAndWait(5):destroy(6),The status of this row, by which new entries may be created, or old entries deleted from this table.
.1.3.6.1.3.61.1.1.6,PIM-MIB::pimRPSetTable,,not-accessible,,current,,The (conceptual) table listing PIM information for candidate Rendezvous Points (RPs) for IP multicast groups. When the local router is the BSR, this information is obtained from received Candidate-RP-Advertisements. When the local router is not the BSR, this information is obtained from received RP-Set messages.
.1.3.6.1.3.61.1.1.6.1,PIM-MIB::pimRPSetEntry,,not-accessible,pimRPSetComponent:pimRPSetGroupAddress:pimRPSetGroupMask:pimRPSetAddress,current,,An entry (conceptual row) in the pimRPSetTable.
.1.3.6.1.3.61.1.1.6.1.1,PIM-MIB::pimRPSetGroupAddress,IpAddress,not-accessible,,current,,The IP multicast group address which, when combined with pimRPSetGroupMask, gives the group prefix for which this entry contains information about the Candidate-RP.
.1.3.6.1.3.61.1.1.6.1.2,PIM-MIB::pimRPSetGroupMask,IpAddress,not-accessible,,current,,The multicast group address mask which, when combined with pimRPSetGroupAddress, gives the group prefix for which this entry contains information about the Candidate-RP.
.1.3.6.1.3.61.1.1.6.1.3,PIM-MIB::pimRPSetAddress,IpAddress,not-accessible,,current,,The IP address of the Candidate-RP.
.1.3.6.1.3.61.1.1.6.1.4,PIM-MIB::pimRPSetHoldTime,Integer32,read-only,,current,,The holdtime of a Candidate-RP. If the local router is not the BSR, this value is 0.
.1.3.6.1.3.61.1.1.6.1.5,PIM-MIB::pimRPSetExpiryTime,TimeTicks,read-only,,current,,The minimum time remaining before the Candidate-RP will be declared down. If the local router is not the BSR, this value is 0.
.1.3.6.1.3.61.1.1.6.1.6,PIM-MIB::pimRPSetComponent,Integer32,not-accessible,,current,, A number uniquely identifying the component. Each protocol instance connected to a separate domain should have a different index value.
.1.3.6.1.3.61.1.1.7,PIM-MIB::pimIpMRouteNextHopTable,,not-accessible,,current,,The (conceptual) table listing PIM-specific information on a subset of the rows of the ipMRouteNextHopTable defined in the IP Multicast MIB.
.1.3.6.1.3.61.1.1.7.1,PIM-MIB::pimIpMRouteNextHopEntry,,not-accessible,ipMRouteNextHopGroup:ipMRouteNextHopSource:ipMRouteNextHopSourceMask:ipMRouteNextHopIfIndex:ipMRouteNextHopAddress,current,,An entry (conceptual row) in the pimIpMRouteNextHopTable. There is one entry per entry in the ipMRouteNextHopTable whose interface is running PIM and whose ipMRouteNextHopState is pruned(1).
.1.3.6.1.3.61.1.1.7.1.2,PIM-MIB::pimIpMRouteNextHopPruneReason,INTEGER,read-only,,current,other(1):prune(2):assert(3),This object indicates why the downstream interface was pruned, whether in response to a PIM prune message or due to PIM Assert processing.
.1.3.6.1.3.61.1.1.11,PIM-MIB::pimCandidateRPTable,,not-accessible,,current,,The (conceptual) table listing the IP multicast groups for which the local router is to advertise itself as a Candidate-RP when the value of pimComponentCRPHoldTime is non-zero. If this table is empty, then the local router will advertise itself as a Candidate-RP for all groups (providing the value of pimComponentCRPHoldTime is non- zero).
.1.3.6.1.3.61.1.1.11.1,PIM-MIB::pimCandidateRPEntry,,not-accessible,pimCandidateRPGroupAddress:pimCandidateRPGroupMask,current,,An entry (conceptual row) in the pimCandidateRPTable.
.1.3.6.1.3.61.1.1.11.1.1,PIM-MIB::pimCandidateRPGroupAddress,IpAddress,not-accessible,,current,,The IP multicast group address which, when combined with pimCandidateRPGroupMask, identifies a group prefix for which the local router will advertise itself as a Candidate-RP.
.1.3.6.1.3.61.1.1.11.1.2,PIM-MIB::pimCandidateRPGroupMask,IpAddress,not-accessible,,current,,The multicast group address mask which, when combined with pimCandidateRPGroupMask, identifies a group prefix for which the local router will advertise itself as a Candidate-RP.
.1.3.6.1.3.61.1.1.11.1.3,PIM-MIB::pimCandidateRPAddress,IpAddress,read-create,,current,,The (unicast) address of the interface which will be advertised as a Candidate-RP.
.1.3.6.1.3.61.1.1.11.1.4,PIM-MIB::pimCandidateRPRowStatus,INTEGER,read-create,,current,active(1):notInService(2):notReady(3):createAndGo(4):createAndWait(5):destroy(6),The status of this row, by which new entries may be created, or old entries deleted from this table.
.1.3.6.1.3.61.1.1.12,PIM-MIB::pimComponentTable,,not-accessible,,current,,The (conceptual) table containing objects specific to a PIM domain. One row exists for each domain to which the router is connected. A PIM-SM domain is defined as an area of the network over which Bootstrap messages are forwarded. Typically, a PIM-SM router will be a member of exactly one domain. This table also supports, however, routers which may form a border between two PIM-SM domains and do not forward Bootstrap messages between them.
.1.3.6.1.3.61.1.1.12.1,PIM-MIB::pimComponentEntry,,not-accessible,pimComponentIndex,current,,An entry (conceptual row) in the pimComponentTable.
.1.3.6.1.3.61.1.1.12.1.1,PIM-MIB::pimComponentIndex,Integer32,not-accessible,,current,,A number uniquely identifying the component. Each protocol instance connected to a separate domain should have a different index value. Routers that only support membership in a single PIM-SM domain should use a pimComponentIndex value of 1.
.1.3.6.1.3.61.1.1.12.1.2,PIM-MIB::pimComponentBSRAddress,IpAddress,read-only,,current,,The IP address of the bootstrap router (BSR) for the local PIM region.
.1.3.6.1.3.61.1.1.12.1.3,PIM-MIB::pimComponentBSRExpiryTime,TimeTicks,read-only,,current,,The minimum time remaining before the bootstrap router in the local domain will be declared down. For candidate BSRs, this is the time until the component sends an RP-Set message. For other routers, this is the time until it may accept an RP-Set message from a lower candidate BSR.
.1.3.6.1.3.61.1.1.12.1.4,PIM-MIB::pimComponentCRPHoldTime,Integer32,read-create,,current,,The holdtime of the component when it is a candidate RP in the local domain. The value of 0 is used to indicate that the local system is not a Candidate-RP.
.1.3.6.1.3.61.1.1.12.1.5,PIM-MIB::pimComponentStatus,INTEGER,read-create,,current,active(1):notInService(2):notReady(3):createAndGo(4):createAndWait(5):destroy(6),The status of this entry. Creating the entry creates another protocol instance; destroying the entry disables a protocol instance.
.1.3.6.1.3.61.2,PIM-MIB::pimMIBConformance,,,,,,
.1.3.6.1.3.61.2.1,PIM-MIB::pimMIBCompliances,,,,,,
.1.3.6.1.3.61.2.1.1,PIM-MIB::pimV1MIBCompliance,,,,,,The compliance statement for routers running PIMv1 and implementing the PIM MIB.
.1.3.6.1.3.61.2.1.2,PIM-MIB::pimSparseV2MIBCompliance,,,,,,The compliance statement for routers running PIM Sparse Mode and implementing the PIM MIB.
.1.3.6.1.3.61.2.1.3,PIM-MIB::pimDenseV2MIBCompliance,,,,,,The compliance statement for routers running PIM Dense Mode and implementing the PIM MIB.
.1.3.6.1.3.61.2.2,PIM-MIB::pimMIBGroups,,,,,,
.1.3.6.1.3.61.2.2.1,PIM-MIB::pimNotificationGroup,,,,,,A collection of notifications for signaling important PIM events.
.1.3.6.1.3.61.2.2.2,PIM-MIB::pimV2MIBGroup,,,,,,A collection of objects to support management of PIM Sparse Mode (version 2) routers.
.1.3.6.1.3.61.2.2.3,PIM-MIB::pimV2CandidateRPMIBGroup,,,,,,A collection of objects to support configuration of which groups a router is to advertise itself as a Candidate-RP.
.1.3.6.1.3.61.2.2.4,PIM-MIB::pimV1MIBGroup,,,,,,A collection of objects to support management of PIM (version 1) routers.
.1.3.6.1.3.61.2.2.5,PIM-MIB::pimDenseV2MIBGroup,,,,,,A collection of objects to support management of PIM Dense Mode (version 2) routers.
.1.3.6.1.3.61.2.2.6,PIM-MIB::pimNextHopGroup,,,,,,A collection of optional objects to provide per-next hop information for diagnostic purposes. Supporting this group may add a large number of instances to a tree walk, but the information in this group can be extremely useful in tracking down multicast connectivity problems.
.1.3.6.1.3.61.2.2.7,PIM-MIB::pimAssertGroup,,,,,,A collection of optional objects to provide extra information about the assert election process. There is no protocol reason to keep such information, but some implementations may already keep this information and make it available. These objects can also be very useful in debugging connectivity or duplicate packet problems, especially if the assert winner does not support the PIM and IP Multicast MIBs.
.1.3.6.1.4,SNMPv2-SMI::private,,,,,,
.1.3.6.1.4.1,SNMPv2-SMI::enterprises,,,,,,
.1.3.6.1.4.1.11,HP-SWITCH-PL-MIB::hp,,,,,,
.1.3.6.1.4.1.11.0,HP-SN-ROUTER-TRAP-MIB::hp#,,,,,,
.1.3.6.1.4.1.11.0.1,HP-SN-TRAP-MIB::snTrapChasPwrSupply,,,,,,The SNMP trap that is generated when a power supply fails to operate normally. The value is a packed bit string; the 2 power supplies status are encoded into 4 bits (a nibble).  The following shows the meaning of each bit: (bit 0 is the least significant bit). bit position meaning ------------ ------- 4-31 reserved 3 Power Supply 2 DC (0=bad, 1=good). 2 Power Supply 1 DC (0=bad, 1=good). 1 Power Supply 2 present status (0=present, 1=not-present). 0 Power Supply 1 present status (0=present, 1=not-present).
.1.3.6.1.4.1.11.0.2,HP-SN-TRAP-MIB::snTrapLockedAddressViolation,,,,,,The SNMP trap that is generated when more source MAC addresses are received from a port than the maximum number of addresses configured to that port.
.1.3.6.1.4.1.11.0.3,HP-SN-ROUTER-TRAP-MIB::snTrapOspfIfStateChange,,,,,,An ospfIfStateChange trap signifies that there has been a change in the state of a non-virtual OSPF interface. This trap should be generated when the interface state regresses (e.g., goes from Dr to Down) or progresses to a terminal state (i.e., Point-to-Point, DR Other, Dr, or Backup).
.1.3.6.1.4.1.11.0.4,HP-SN-ROUTER-TRAP-MIB::snTrapOspfVirtIfStateChange,,,,,,An ospfIfStateChange trap signifies that there has been a change in the state of an OSPF vir- tual interface. This trap should be generated when the inter- face state regresses (e.g., goes from Point- to-Point to Down) or progresses to a terminal state (i.e., Point-to-Point).
.1.3.6.1.4.1.11.0.5,HP-SN-ROUTER-TRAP-MIB::snOspfNbrStateChange,,,,,,An ospfNbrStateChange trap signifies that there has been a change in the state of a non- virtual OSPF neighbor. This trap should be generated when the neighbor state regresses (e.g., goes from Attempt or Full to 1-Way or Down) or progresses to a terminal state (e.g., 2-Way or Full). When an neighbor transitions from or to Full on non-broadcast multi-access and broadcast networks, the trap should be gen- erated by the designated router. A designated router transitioning to Down will be noted by ospfIfStateChange.
.1.3.6.1.4.1.11.0.6,HP-SN-ROUTER-TRAP-MIB::snOspfVirtNbrStateChange,,,,,,An ospfIfStateChange trap signifies that there has been a change in the state of an OSPF vir- tual neighbor. This trap should be generated when the neighbor state regresses (e.g., goes from Attempt or Full to 1-Way or Down) or progresses to a terminal state (e.g., Full).
.1.3.6.1.4.1.11.0.7,HP-SN-ROUTER-TRAP-MIB::snOspfIfConfigError,,,,,,An ospfIfConfigError trap signifies that a packet has been received on a non-virtual in- terface from a router whose configuration parameters conflict with this router's confi- guration parameters. Note that the event op- tionMismatch should cause a trap only if it prevents an adjacency from forming.
.1.3.6.1.4.1.11.0.8,HP-SN-ROUTER-TRAP-MIB::snOspfVirtIfConfigError,,,,,,An ospfConfigError trap signifies that a pack- et has been received on a virtual interface from a router whose configuration parameters conflict with this router's configuration parameters. Note that the event optionMismatch should cause a trap only if it prevents an ad- jacency from forming.
.1.3.6.1.4.1.11.0.9,HP-SN-ROUTER-TRAP-MIB::snOspfIfAuthFailure,,,,,,An ospfIfAuthFailure trap signifies that a packet has been received on a non-virtual in- terface from a router whose authentication key or authentication type conflicts with this router's authentication key or authentication type.
.1.3.6.1.4.1.11.0.10,HP-SN-ROUTER-TRAP-MIB::snOspfVirtIfAuthFailure,,,,,,An ospfVirtIfAuthFailure trap signifies that a packet has been received on a virtual interface from a router whose authentication key or au- thentication type conflicts with this router's authentication key or authentication type.
.1.3.6.1.4.1.11.0.11,HP-SN-ROUTER-TRAP-MIB::snOspfIfRxBadPacket,,,,,,An ospfIfRxBadPacket trap signifies that an OSPF packet has been received on a non-virtual interface that cannot be parsed.
.1.3.6.1.4.1.11.0.12,HP-SN-ROUTER-TRAP-MIB::snOspfVirtIfRxBadPacket,,,,,,An ospfRxBadPacket trap signifies that an OSPF packet has been received on a virtual interface that cannot be parsed.
.1.3.6.1.4.1.11.0.13,HP-SN-ROUTER-TRAP-MIB::snOspfTxRetransmit,,,,,,An ospfTxRetransmit trap signifies than an OSPF packet has been retransmitted on a non- virtual interface. All packets that may be re- transmitted are associated with an LSDB entry. The LS type, LS ID, and Router ID are used to identify the LSDB entry.
.1.3.6.1.4.1.11.0.14,HP-SN-ROUTER-TRAP-MIB::ospfVirtIfTxRetransmit,,,,,,An ospfTxRetransmit trap signifies than an OSPF packet has been retransmitted on a virtual interface. All packets that may be retransmit- ted are associated with an LSDB entry. The LS type, LS ID, and Router ID are used to identify the LSDB entry.
.1.3.6.1.4.1.11.0.15,HP-SN-ROUTER-TRAP-MIB::snOspfOriginateLsa,,,,,,An ospfOriginateLsa trap signifies that a new LSA has been originated by this router. This trap should not be invoked for simple refreshes of LSAs (which happesn every 30 minutes), but instead will only be invoked when an LSA is (re)originated due to a topology change. Addi- tionally, this trap does not include LSAs that are being flushed because they have reached MaxAge.
.1.3.6.1.4.1.11.0.16,HP-SN-ROUTER-TRAP-MIB::snOspfMaxAgeLsa,,,,,,An ospfMaxAgeLsa trap signifies that one of the LSA in the router's link-state database has aged to MaxAge.
.1.3.6.1.4.1.11.0.17,HP-SN-ROUTER-TRAP-MIB::snOspfLsdbOverflow,,,,,,An ospfLsdbOverflow trap signifies that the number of LSAs in the router's link-state data- base has exceeded ospfExtLsdbLimit.
.1.3.6.1.4.1.11.0.18,HP-SN-ROUTER-TRAP-MIB::snOspfLsdbApproachingOverflow,,,,,,An ospfLsdbApproachingOverflow trap signifies that the number of LSAs in the router's link- state database has exceeded ninety percent of ospfExtLsdbLimit.
.1.3.6.1.4.1.11.0.19,HP-SN-TRAP-MIB::snTrapL4MaxSessionLimitReached,,,,,,The SNMP trap that is generated when the maximum number of connections reached.
.1.3.6.1.4.1.11.0.20,HP-SN-TRAP-MIB::snTrapL4TcpSynLimitReached,,,,,,The SNMP trap that is generated when the number of TCP SYN limits reached.
.1.3.6.1.4.1.11.0.21,HP-SN-TRAP-MIB::snTrapL4RealServerUp,,,,,,The SNMP trap that is generated when the load balancing real server is up.
.1.3.6.1.4.1.11.0.22,HP-SN-TRAP-MIB::snTrapL4RealServerDown,,,,,,The SNMP trap that is generated when the load balancing real server is down.
.1.3.6.1.4.1.11.0.23,HP-SN-TRAP-MIB::snTrapL4RealServerPortUp,,,,,,The SNMP trap that is generated when the load balancing real server TCP port is up.
.1.3.6.1.4.1.11.0.24,HP-SN-TRAP-MIB::snTrapL4RealServerPortDown,,,,,,The SNMP trap that is generated when the load balancing real server TCP port is down.
.1.3.6.1.4.1.11.0.25,HP-SN-TRAP-MIB::snTrapL4RealServerMaxConnectionLimitReached,,,,,,The SNMP trap that is generated when the real server reaches maximum number of connections.
.1.3.6.1.4.1.11.0.26,HP-SN-TRAP-MIB::snTrapL4BecomeStandby,,,,,,The SNMP trap that is generated when the server load balancing switch changes state from active to standby.
.1.3.6.1.4.1.11.0.27,HP-SN-TRAP-MIB::snTrapL4BecomeActive,,,,,,The SNMP trap that is generated when the server load balancing switch changes state from standby to active.
.1.3.6.1.4.1.11.0.28,HP-SN-TRAP-MIB::snTrapModuleInserted,,,,,,The SNMP trap that is generated when a module was inserted to the chassis during system running.
.1.3.6.1.4.1.11.0.29,HP-SN-TRAP-MIB::snTrapModuleRemoved,,,,,,The SNMP trap that is generated when a module was removed from the chassis during system running.
.1.3.6.1.4.1.11.0.30,HP-SN-TRAP-MIB::snTrapChasPwrSupplyFailed,,,,,,The SNMP trap that is generated when a power supply operational status changed from normal to failure.
.1.3.6.1.4.1.11.0.31,HP-SN-TRAP-MIB::snTrapChasFanFailed,,,,,,The SNMP trap that is generated when a fan fails to operate normally.
.1.3.6.1.4.1.11.0.32,HP-SN-TRAP-MIB::snTrapLockedAddressViolation2,,,,,,The SNMP trap that is generated when more source MAC addresses are received from a port than the maximum number of addresses configured to that port.
.1.3.6.1.4.1.11.0.33,HP-SN-TRAP-MIB::snTrapFsrpIfStateChange,,,,,,The SNMP trap that is generated when a FSRP routing device changed state from active to standby or vice-versa.
.1.3.6.1.4.1.11.0.34,HP-SN-TRAP-MIB::snTrapVrrpIfStateChange,,,,,,The SNMP trap that is generated when a VRRP routing device switched between states master, backup, intialized or uknown.
.1.3.6.1.4.1.11.0.35,HP-SN-TRAP-MIB::snTrapMgmtModuleRedunStateChange,,,,,,The SNMP trap that is generated when the management module changes redundancy state.
.1.3.6.1.4.1.11.0.36,HP-SN-TRAP-MIB::snTrapTemperatureWarning,,,,,,The SNMP trap that is generated when the actual temperature reading is above the warning temperature threshold.
.1.3.6.1.4.1.11.0.37,HP-SN-TRAP-MIB::snTrapAccessListDeny,,,,,,The SNMP trap that is generated when a packet was denied by an access list.
.1.3.6.1.4.1.11.0.38,HP-SN-TRAP-MIB::snTrapMacFilterDeny,,,,,,The SNMP trap that is generated when a packet was denied by a MAC address filter.
.1.3.6.1.4.1.11.0.39,HP-SN-TRAP-MIB::snTrapL4GslbRemoteUp,,,,,,The SNMP trap that is generated when the connection to the remote SI is established.
.1.3.6.1.4.1.11.0.40,HP-SN-TRAP-MIB::snTrapL4GslbRemoteDown,,,,,,The SNMP trap that is generated when the connection to the remote SI is down.
.1.3.6.1.4.1.11.0.41,HP-SN-TRAP-MIB::snTrapL4GslbRemoteControllerUp,,,,,,The SNMP trap that is generated when the connection to the GSLB SI is established.
.1.3.6.1.4.1.11.0.42,HP-SN-TRAP-MIB::snTrapL4GslbRemoteControllerDown,,,,,,The SNMP trap that is generated when the connection to the GSLB SI is down.
.1.3.6.1.4.1.11.0.43,HP-SN-TRAP-MIB::snTrapL4GslbHealthCheckIpUp,,,,,,The SNMP trap that is generated when GSLB health check for an address transitions
.1.3.6.1.4.1.11.0.44,HP-SN-TRAP-MIB::snTrapL4GslbHealthCheckIpDown,,,,,,The SNMP trap that is generated when GSLB health check for an address transitions
.1.3.6.1.4.1.11.0.45,HP-SN-TRAP-MIB::snTrapL4GslbHealthCheckIpPortUp,,,,,,The SNMP trap that is generated when a given port for a health check address is up.
.1.3.6.1.4.1.11.0.46,HP-SN-TRAP-MIB::snTrapL4GslbHealthCheckIpPortDown,,,,,,The SNMP trap that is generated when a given port for a health check address is down.
.1.3.6.1.4.1.11.0.47,HP-SN-TRAP-MIB::snTrapL4FirewallBecomeStandby,,,,,,The SNMP trap that is generated when the server load balancing switch Firewall changes state from active to standby.
.1.3.6.1.4.1.11.0.48,HP-SN-TRAP-MIB::snTrapL4FirewallBecomeActive,,,,,,The SNMP trap that is generated when the server load balancing switch Firewall changes state from standby to active.
.1.3.6.1.4.1.11.0.49,HP-SN-TRAP-MIB::snTrapL4FirewallPathUp,,,,,,The SNMP trap that is generated when the server load balancing switch Firewall path is up.
.1.3.6.1.4.1.11.0.50,HP-SN-TRAP-MIB::snTrapL4FirewallPathDown,,,,,,The SNMP trap that is generated when the server load balancing switch Firewall path is down.
.1.3.6.1.4.1.11.0.51,HP-SN-TRAP-MIB::snTrapIcmpLocalExceedBurst,,,,,,The SNMP trap that is generated when incoming ICMP exceeds burst-MAX.
.1.3.6.1.4.1.11.0.52,HP-SN-TRAP-MIB::snTrapIcmpTransitExceedBurst,,,,,,The SNMP trap that is generated when transit ICMP exceeds burst-MAX.
.1.3.6.1.4.1.11.0.53,HP-SN-TRAP-MIB::snTrapTcpLocalExceedBurst,,,,,,The SNMP trap that is generated when incoming TCP SYN exceeds burst-MAX.
.1.3.6.1.4.1.11.0.54,HP-SN-TRAP-MIB::snTrapTcpTransitExceedBurst,,,,,,The SNMP trap that is generated when transit TCP exceeds burst-MAX.
.1.3.6.1.4.1.11.0.55,HP-SN-TRAP-MIB::snTrapL4ContentVerification,,,,,,The SNMP trap that is generated when the HTTP match-list pattern is found.
.1.3.6.1.4.1.11.0.56,HP-SN-TRAP-MIB::snTrapDuplicateIp,,,,,,Duplicate IP address detected.
.1.3.6.1.4.1.11.0.57,HP-SN-TRAP-MIB::snTrapMplsProblem,,,,,,MPLS Problem Detected.
.1.3.6.1.4.1.11.0.58,HP-SN-TRAP-MIB::snTrapMplsException,,,,,,MPLS Exception Detected.
.1.3.6.1.4.1.11.0.59,HP-SN-TRAP-MIB::snTrapMplsAudit,,,,,,MPLS Audit Trap.
.1.3.6.1.4.1.11.0.60,HP-SN-TRAP-MIB::snTrapMplsDeveloper,,,,,,MPLS Developer Trap.
.1.3.6.1.4.1.11.0.61,HP-SN-TRAP-MIB::snTrapNoBmFreeQueue,,,,,,The SNMP trap that is generated when no free queue is available in buffer manager.
.1.3.6.1.4.1.11.0.62,HP-SN-TRAP-MIB::snTrapSmcDmaDrop,,,,,,The SNMP trap that is generated when SMC DMA packet is dropped.
.1.3.6.1.4.1.11.0.63,HP-SN-TRAP-MIB::snTrapSmcBpDrop,,,,,,The SNMP trap that is generated when SMC BackPlane packet is dropped.
.1.3.6.1.4.1.11.0.64,HP-SN-TRAP-MIB::snTrapBmWriteSeqDrop,,,,,,The SNMP trap that is generated when BM write sequence packet is dropped.
.1.3.6.1.4.1.11.0.65,HP-SN-TRAP-MIB::snTrapBgpPeerUp,,,,,,The SNMP trap that is generated when the bgp peer is up.
.1.3.6.1.4.1.11.0.66,HP-SN-TRAP-MIB::snTrapBgpPeerDown,,,,,,The SNMP trap that is generated when the bgp peer is down.
.1.3.6.1.4.1.11.0.67,HP-SN-TRAP-MIB::snTrapL4RealServerResponseTimeLowerLimit,,,,,,The SNMP trap that is generated when the real server average response time exceeds lower threshold.
.1.3.6.1.4.1.11.0.68,HP-SN-TRAP-MIB::snTrapL4RealServerResponseTimeUpperLimit,,,,,,The SNMP trap that is generated when the real server average response time exceeds upper threshold.
.1.3.6.1.4.1.11.0.69,HP-SN-TRAP-MIB::snTrapL4TcpAttackRateExceedMax,,,,,,The SNMP trap that is generated when the TCP attack rate exceeds configured maximum.
.1.3.6.1.4.1.11.0.70,HP-SN-TRAP-MIB::snTrapL4TcpAttackRateExceedThreshold,,,,,,The SNMP trap that is generated when the TCP attack rate exceeds 80% of configured maximum.
.1.3.6.1.4.1.11.0.71,HP-SN-TRAP-MIB::snTrapL4ConnectionRateExceedMax,,,,,,The SNMP trap that is generated when the L4 connection rate exceeds configured maximum.
.1.3.6.1.4.1.11.0.72,HP-SN-TRAP-MIB::snTrapL4ConnectionRateExceedThreshold,,,,,,The SNMP trap that is generated when the L4 connection rate exceeds 80% of configured maximum
.1.3.6.1.4.1.11.0.73,HP-SN-TRAP-MIB::snTrapRunningConfigChanged,,,,,,The SNMP trap that is generated when the running configuration was changed.
.1.3.6.1.4.1.11.0.74,HP-SN-TRAP-MIB::snTrapStartupConfigChanged,,,,,,The SNMP trap that is generated when the startup configuration was changed.
.1.3.6.1.4.1.11.0.75,HP-SN-TRAP-MIB::snTrapUserLogin,,,,,,The SNMP trap that is generated when user login.
.1.3.6.1.4.1.11.0.76,HP-SN-TRAP-MIB::snTrapUserLogout,,,,,,The SNMP trap that is generated when user logout.
.1.3.6.1.4.1.11.0.77,HP-SN-TRAP-MIB::snTrapPortSecurityViolation,,,,,,The SNMP trap that is generated when insecure MAC addresses are received from a port with MAC security feature enabled.
.1.3.6.1.4.1.11.0.78,HP-SN-TRAP-MIB::snTrapPortSecurityShutdown,,,,,,The SNMP trap that is generated when insecure MAC addresses are received from a port caused the port to shutdown.
.1.3.6.1.4.1.11.0.79,HP-SN-TRAP-MIB::snTrapMrpStateChange,,,,,,The SNMP trap that is generated when a MRP switching and routing device changed state to disabled, blocking, preforwarding, forwarding, uknown.
.1.3.6.1.4.1.11.0.80,HP-SN-TRAP-MIB::snTrapMrpCamError,,,,,,The SNMP trap that is generated when a MRP Cam Error occurs.
.1.3.6.1.4.1.11.0.81,HP-SN-TRAP-MIB::snTrapChasPwrSupplyOK,,,,,,The SNMP trap that is generated when a power supply operational status changed from failure to normal.
.1.3.6.1.4.1.11.0.82,HP-SN-TRAP-MIB::snTrapVrrpeIfStateChange,,,,,,The SNMP trap that is generated when a VRRPE routing device switched between states master, backup, intialized or uknown.
.1.3.6.1.4.1.11.0.83,HP-SN-TRAP-MIB::snTrapVsrpIfStateChange,,,,,,The SNMP trap that is generated when a VSRP switching and routing device switched between states master, backup, intialized or uknown.
.1.3.6.1.4.1.11.2,HP-SWITCH-PL-MIB::nm,,,,,,
.1.3.6.1.4.1.11.2.3,HP-SWITCH-PL-MIB::hpSystem,,,,,,
.1.3.6.1.4.1.11.2.3.7,HP-SWITCH-PL-MIB::netElement,,,,,,
.1.3.6.1.4.1.11.2.3.7.1,HP-ICF-OID::bridge,,,,,,
.1.3.6.1.4.1.11.2.3.7.1.1,HP-ICF-OID::bridge1010,,,,,,The authoritative identifier for the HP 28673A 10:10 LAN Bridge.
.1.3.6.1.4.1.11.2.3.7.1.1.0,ICF-ETWIST::bridge1010TrapPrefix,,,,,,
.1.3.6.1.4.1.11.2.3.7.1.1.0.0,ICF-ETWIST::thresholdTrap1010,,,,,,********* THIS NOTIFICATION IS OBSOLETE ********* A thresholdTrap(0) is specific to ICF devices. It signifies that the threshold entity in the device has detected that the object identified by evthObject has exceeded the threshold identified by evthThreshold during the time interval evthTimeInterval. After this condition occurs, it will not reoccur until the the object identified by evthObject falls below evthHysteresis for the duration of evthTimeInterval.
.1.3.6.1.4.1.11.2.3.7.1.1.0.3,ICF-ETWIST::stpTrap1010,,,,,,********* THIS NOTIFICATION IS OBSOLETE ********* A stpTrap(3) is device type specific to ICF bridges. It signifies that the Spanning Tree entity in the bridge has detected a change of state to either Blocking or Forwarding.
.1.3.6.1.4.1.11.2.3.7.1.1.0.4,ICF-ETWIST::temperatureTrap1010,,,,,,********* THIS NOTIFICATION IS OBSOLETE ********* A temperatureTrap(4) is device type specific to ICF bridges. It signifies that the bridge hardware has detected an overheated condition.
.1.3.6.1.4.1.11.2.3.7.1.2,HP-ICF-OID::bridgeRemote,,,,,,The authoritative identifier for the HP 28674A/B Remote Bridge.
.1.3.6.1.4.1.11.2.3.7.1.2.0,ICF-ETWIST::bridgeRemoteTrapPrefix,,,,,,
.1.3.6.1.4.1.11.2.3.7.1.2.0.0,ICF-ETWIST::thresholdTrapRem,,,,,,********* THIS NOTIFICATION IS OBSOLETE ********* A thresholdTrap(0) is specific to ICF devices. It signifies that the threshold entity in the device has detected that the object identified by evthObject has exceeded the threshold identified by evthThreshold during the time interval evthTimeInterval. After this condition occurs, it will not reoccur until the the object identified by evthObject falls below evthHysteresis for the duration of evthTimeInterval.
.1.3.6.1.4.1.11.2.3.7.1.2.0.3,ICF-ETWIST::stpTrapRem,,,,,,********* THIS NOTIFICATION IS OBSOLETE ********* A stpTrap(3) is device type specific to ICF bridges. It signifies that the Spanning Tree entity in the bridge has detected a change of state to either Blocking or Forwarding.
.1.3.6.1.4.1.11.2.3.7.1.2.0.4,ICF-ETWIST::temperatureTrapRem,,,,,,********* THIS NOTIFICATION IS OBSOLETE ********* A temperatureTrap(4) is device type specific to ICF bridges. It signifies that the bridge hardware has detected an overheated condition.
.1.3.6.1.4.1.11.2.3.7.1.3,HP-ICF-OID::eswitch,,,,,,The authoritative identifier for the HP J2418A EtherTwist LAN Switch.
.1.3.6.1.4.1.11.2.3.7.1.8,HP-ICF-OID::eswitch2,,,,,,The authoritative identifier for the HP J2980A AdvanceStack LAN Switch-16.
.1.3.6.1.4.1.11.2.3.7.1.9,HP-ICF-OID::netSwitch100,,,,,,The authoritative identifier for the HP J3126A AdvanceStack Switch 100.
.1.3.6.1.4.1.11.2.3.7.1.10,HP-ICF-OID::netSwitch200,,,,,,The authoritative identifier for the HP J3125A AdvanceStack Switch 200.
.1.3.6.1.4.1.11.2.3.7.2,HP-ICF-OID::router,,,,,,
.1.3.6.1.4.1.11.2.3.7.2.1,HP-ICF-OID::icfRouterER,,,,,,The authoritative identifier for the HP 27285A Router ER.
.1.3.6.1.4.1.11.2.3.7.2.2,HP-ICF-OID::icfRouterTR,,,,,,The authoritative identifier for the HP 27286A Router TR.
.1.3.6.1.4.1.11.2.3.7.2.3,HP-ICF-OID::icfRouterSR,,,,,,The authoritative identifier for the HP 27288A Router SR.
.1.3.6.1.4.1.11.2.3.7.2.4,HP-ICF-OID::icfRouterFR,,,,,,The authoritative identifier for the HP 27289A Router FR.
.1.3.6.1.4.1.11.2.3.7.2.5,HP-ICF-OID::icfRouterLR,,,,,,The authoritative identifier for the HP Router LR.
.1.3.6.1.4.1.11.2.3.7.2.6,HP-ICF-OID::icfRouterBR,,,,,,The authoritative identifier for the HP 27290A Router BR.
.1.3.6.1.4.1.11.2.3.7.2.7,HP-ICF-OID::icfRouterPR,,,,,,The authoritative identifier for the HP J2540A Router PR.
.1.3.6.1.4.1.11.2.3.7.2.8,HP-ICF-OID::icfRouter650,,,,,,The authoritative identifier for the HP J2430A AdvanceStack Router 650.
.1.3.6.1.4.1.11.2.3.7.2.8.2,HP-ICF-OID::icfRouter650Engine,,,,,,The authoritative identifier for the routing engine card for the HP J2430A AdvanceStack Router 650.
.1.3.6.1.4.1.11.2.3.7.2.8.3,HP-ICF-OID::icfRouter650Port4E,,,,,,The authoritative identifier for the HP J2435A AdvanceStack Router 4E Port Module.
.1.3.6.1.4.1.11.2.3.7.2.8.4,HP-ICF-OID::icfRouter650Port4S,,,,,,The authoritative identifier for the HP J2434A AdvanceStack Router 4S Port Module.
.1.3.6.1.4.1.11.2.3.7.2.8.5,HP-ICF-OID::icfRouter650Port4T,,,,,,The authoritative identifier for the HP J2437A AdvanceStack Router 4T Port Module.
.1.3.6.1.4.1.11.2.3.7.2.8.6,HP-ICF-OID::icfRouter650PortFDDI,,,,,,The authoritative identifier for the HP J2436A AdvanceStack Router FDDI Port Module.
.1.3.6.1.4.1.11.2.3.7.2.8.7,HP-ICF-OID::icfRouter650Port100VG,,,,,,The authoritative identifier for the HP J2438A AdvanceStack Router 100VG Port Module.
.1.3.6.1.4.1.11.2.3.7.2.9,HP-ICF-OID::icfRouter230,,,,,,The authoritative identifier for the HP J2540B Router 230.
.1.3.6.1.4.1.11.2.3.7.2.10,HP-ICF-OID::icfRouter250,,,,,,The authoritative identifier for the HP 27289B Router 250.
.1.3.6.1.4.1.11.2.3.7.2.11,HP-ICF-OID::icfRouter255,,,,,,The authoritative identifier for the HP J2543A Router 255.
.1.3.6.1.4.1.11.2.3.7.2.12,HP-ICF-OID::icfRouter210,,,,,,The authoritative identifier for the HP J2628A AdvanceStack Router 210.
.1.3.6.1.4.1.11.2.3.7.5,HP-ICF-OID::hub,,,,,,
.1.3.6.1.4.1.11.2.3.7.5.1,HP-ICF-OID::etherTwist12,,,,,,The authoritative identifier for the HP 27288A/B EtherTwist Hub PLUS.
.1.3.6.1.4.1.11.2.3.7.5.1.0,ICF-ETWIST::etherTwist12TrapPrefix,,,,,,
.1.3.6.1.4.1.11.2.3.7.5.1.0.0,ICF-ETWIST::thresholdTrapET12,,,,,,********* THIS NOTIFICATION IS OBSOLETE ********* A thresholdTrap(0) is specific to ICF devices. It signifies that the threshold entity in the device has detected that the object identified by evthObject has exceeded the threshold identified by evthThreshold during the time interval evthTimeInterval. After this condition occurs, it will not reoccur until the the object identified by evthObject falls below evthHysteresis for the duration of evthTimeInterval.
.1.3.6.1.4.1.11.2.3.7.5.1.0.3,ICF-ETWIST::linkBeatTrapET12,,,,,,********* THIS NOTIFICATION IS OBSOLETE ********* A linkBeatTrap(3) is device type specific to ICF hubs. It signifies that the hub hardware has detected a change of state in a port's link beat status. The current value of the port's link beat status is returned in the PDU.
.1.3.6.1.4.1.11.2.3.7.5.1.0.4,ICF-ETWIST::segmentationTrapET12,,,,,,********* THIS NOTIFICATION IS OBSOLETE ********* A segmentationTrap(4) is device type specific to ICF hubs. It signifies that the hub hardware has detected a change of state in a port's segmentation status. The current value of the port's segmentation status is returned in the PDU.
.1.3.6.1.4.1.11.2.3.7.5.1.0.5,ICF-ETWIST::backupLinkTrapET12,,,,,,********* THIS NOTIFICATION IS OBSOLETE ********* A backupLinkTrap(5) is device type specific to most ICF hubs. It signifies that there has been a change in state of ifAdminStatus for a backup port on the hub. The new value of ifAdminStatus is returned in the PDU. Backup links are not supported on the HP28688A hub.
.1.3.6.1.4.1.11.2.3.7.5.3,HP-ICF-OID::fiberOptic,,,,,,The authoritative identifier for the HP 28682A Fiber-Optic Hub PLUS.
.1.3.6.1.4.1.11.2.3.7.5.3.0,ICF-ETWIST::fiberOpticTrapPrefix,,,,,,
.1.3.6.1.4.1.11.2.3.7.5.3.0.0,ICF-ETWIST::thresholdTrapFiber,,,,,,********* THIS NOTIFICATION IS OBSOLETE ********* A thresholdTrap(0) is specific to ICF devices. It signifies that the threshold entity in the device has detected that the object identified by evthObject has exceeded the threshold identified by evthThreshold during the time interval evthTimeInterval. After this condition occurs, it will not reoccur until the the object identified by evthObject falls below evthHysteresis for the duration of evthTimeInterval.
.1.3.6.1.4.1.11.2.3.7.5.3.0.3,ICF-ETWIST::linkBeatTrapFiber,,,,,,********* THIS NOTIFICATION IS OBSOLETE ********* A linkBeatTrap(3) is device type specific to ICF hubs. It signifies that the hub hardware has detected a change of state in a port's link beat status. The current value of the port's link beat status is returned in the PDU.
.1.3.6.1.4.1.11.2.3.7.5.3.0.4,ICF-ETWIST::segmentationTrapFiber,,,,,,********* THIS NOTIFICATION IS OBSOLETE ********* A segmentationTrap(4) is device type specific to ICF hubs. It signifies that the hub hardware has detected a change of state in a port's segmentation status. The current value of the port's segmentation status is returned in the PDU.
.1.3.6.1.4.1.11.2.3.7.5.3.0.5,ICF-ETWIST::backupLinkTrapFiber,,,,,,********* THIS NOTIFICATION IS OBSOLETE ********* A backupLinkTrap(5) is device type specific to most ICF hubs. It signifies that there has been a change in state of ifAdminStatus for a backup port on the hub. The new value of ifAdminStatus is returned in the PDU.
.1.3.6.1.4.1.11.2.3.7.5.4,HP-ICF-OID::etherTwist48,,,,,,The authoritative identifier for the HP 28699A EtherTwist Hub PLUS/48.
.1.3.6.1.4.1.11.2.3.7.5.4.0,ICF-ETWIST::etherTwist48TrapPrefix,,,,,,
.1.3.6.1.4.1.11.2.3.7.5.4.0.0,ICF-ETWIST::thresholdTrapET48,,,,,,********* THIS NOTIFICATION IS OBSOLETE ********* A thresholdTrap(0) is specific to ICF devices. It signifies that the threshold entity in the device has detected that the object identified by evthObject has exceeded the threshold identified by evthThreshold during the time interval evthTimeInterval. After this condition occurs, it will not reoccur until the the object identified by evthObject falls below evthHysteresis for the duration of evthTimeInterval.
.1.3.6.1.4.1.11.2.3.7.5.4.0.3,ICF-ETWIST::linkBeatTrapET48,,,,,,********* THIS NOTIFICATION IS OBSOLETE ********* A linkBeatTrap(3) is device type specific to ICF hubs. It signifies that the hub hardware has detected a change of state in a port's link beat status. The current value of the port's link beat status is returned in the PDU.
.1.3.6.1.4.1.11.2.3.7.5.4.0.4,ICF-ETWIST::segmentationTrapET48,,,,,,********* THIS NOTIFICATION IS OBSOLETE ********* A segmentationTrap(4) is device type specific to ICF hubs. It signifies that the hub hardware has detected a change of state in a port's segmentation status. The current value of the port's segmentation status is returned in the PDU.
.1.3.6.1.4.1.11.2.3.7.5.4.0.5,ICF-ETWIST::backupLinkTrapET48,,,,,,********* THIS NOTIFICATION IS OBSOLETE ********* A backupLinkTrap(5) is device type specific to most ICF hubs. It signifies that there has been a change in state of ifAdminStatus for a backup port on the hub. The new value of ifAdminStatus is returned in the PDU.
.1.3.6.1.4.1.11.2.3.7.5.5,HP-ICF-OID::thinLAN,,,,,,The authoritative identifier for the HP 28692A ThinLAN Hub PLUS.
.1.3.6.1.4.1.11.2.3.7.5.5.0,ICF-ETWIST::thinLANTrapPrefix,,,,,,
.1.3.6.1.4.1.11.2.3.7.5.5.0.0,ICF-ETWIST::thresholdTrapTLAN,,,,,,********* THIS NOTIFICATION IS OBSOLETE ********* A thresholdTrap(0) is specific to ICF devices. It signifies that the threshold entity in the device has detected that the object identified by evthObject has exceeded the threshold identified by evthThreshold during the time interval evthTimeInterval. After this condition occurs, it will not reoccur until the the object identified by evthObject falls below evthHysteresis for the duration of evthTimeInterval.
.1.3.6.1.4.1.11.2.3.7.5.5.0.3,ICF-ETWIST::linkBeatTrapTLAN,,,,,,********* THIS NOTIFICATION IS OBSOLETE ********* A linkBeatTrap(3) is device type specific to ICF hubs. It signifies that the hub hardware has detected a change of state in a port's link beat status. The current value of the port's link beat status is returned in the PDU.
.1.3.6.1.4.1.11.2.3.7.5.5.0.4,ICF-ETWIST::segmentationTrapTLAN,,,,,,********* THIS NOTIFICATION IS OBSOLETE ********* A segmentationTrap(4) is device type specific to ICF hubs. It signifies that the hub hardware has detected a change of state in a port's segmentation status. The current value of the port's segmentation status is returned in the PDU.
.1.3.6.1.4.1.11.2.3.7.5.5.0.5,ICF-ETWIST::backupLinkTrapTLAN,,,,,,********* THIS NOTIFICATION IS OBSOLETE ********* A backupLinkTrap(5) is device type specific to most ICF hubs. It signifies that there has been a change in state of ifAdminStatus for a backup port on the hub. The new value of ifAdminStatus is returned in the PDU.
.1.3.6.1.4.1.11.2.3.7.5.6,HP-ICF-OID::etherTwist24S,,,,,,The authoritative identifier for the HP J2355A EtherTwist Secure Hub PLUS/24S
.1.3.6.1.4.1.11.2.3.7.5.6.0,ICF-ETWIST::etherTwist24STrapPrefix,,,,,,
.1.3.6.1.4.1.11.2.3.7.5.6.0.0,ICF-ETWIST::thresholdTrapET24S,,,,,,********* THIS NOTIFICATION IS OBSOLETE ********* A thresholdTrap(0) is specific to ICF devices. It signifies that the threshold entity in the device has detected that the object identified by evthObject has exceeded the threshold identified by evthThreshold during the time interval evthTimeInterval. After this condition occurs, it will not reoccur until the the object identified by evthObject falls below evthHysteresis for the duration of evthTimeInterval.
.1.3.6.1.4.1.11.2.3.7.5.6.0.3,ICF-ETWIST::linkBeatTrapET24S,,,,,,********* THIS NOTIFICATION IS OBSOLETE ********* A linkBeatTrap(3) is device type specific to ICF hubs. It signifies that the hub hardware has detected a change of state in a port's link beat status. The current value of the port's link beat status is returned in the PDU.
.1.3.6.1.4.1.11.2.3.7.5.6.0.4,ICF-ETWIST::segmentationTrapET24S,,,,,,********* THIS NOTIFICATION IS OBSOLETE ********* A segmentationTrap(4) is device type specific to ICF hubs. It signifies that the hub hardware has detected a change of state in a port's segmentation status. The current value of the port's segmentation status is returned in the PDU.
.1.3.6.1.4.1.11.2.3.7.5.6.0.5,ICF-ETWIST::backupLinkTrapET24S,,,,,,********* THIS NOTIFICATION IS OBSOLETE ********* A backupLinkTrap(5) is device type specific to most ICF hubs. It signifies that there has been a change in state of rptrPortAdminStatus for a backup port on the hub. The new value of rptrPortAdminStatus is returned in the PDU.
.1.3.6.1.4.1.11.2.3.7.5.6.0.6,ICF-ETWIST::intrusionTrapET24S,,,,,,********* THIS NOTIFICATION IS OBSOLETE ********* An intrusionTrap(6) is device type specific to EtherTwist hubs with revision 'E' firmware or later and AdvanceStack hubs. It signifies that a port security violation has been detected on a port which has the hubSecPtAlarmEnable flag set to 'enabled'. The MAC address of the intruder and the port on which the intrusion occurred are returned in the PDU.
.1.3.6.1.4.1.11.2.3.7.5.6.0.7,ICF-ETWIST::addressMovedTrapET24S,,,,,,********* THIS NOTIFICATION IS OBSOLETE ********* An addressMovedTrap(7) is device type specific to EtherTwist hubs with revision 'E' firmware or later and AdvanceStack hubs. It signifies that a source MAC address which had been operating at one port has moved to a new port. The MAC address that moved, the group and port that the address moved from, and the group and port that the address moved to are returned in the PDU.
.1.3.6.1.4.1.11.2.3.7.5.6.0.8,ICF-ETWIST::newAddressTrapET24S,,,,,,********* THIS NOTIFICATION IS OBSOLETE ********* A newAddressTrap(8) is device type specific to EtherTwist hubs with revision 'E' firmware or later and AdvanceStack hubs. It signifies that a new MAC address has been detected on one of the hub's ports. The instance of rptrAddrTrackLastSourceAddress for the port with the new address is returned in the PDU.
.1.3.6.1.4.1.11.2.3.7.5.7,HP-ICF-OID::advStack12,,,,,,The authoritative identifier for the HP J2600A AdvanceStack 10Base-T Hub-12
.1.3.6.1.4.1.11.2.3.7.5.7.0,ICF-ETWIST::advStack12TrapPrefix,,,,,,
.1.3.6.1.4.1.11.2.3.7.5.7.0.0,ICF-ETWIST::thresholdTrapAS12,,,,,,********* THIS NOTIFICATION IS OBSOLETE ********* A thresholdTrap(0) is specific to ICF devices. It signifies that the threshold entity in the device has detected that the object identified by evthObject has exceeded the threshold identified by evthThreshold during the time interval evthTimeInterval. After this condition occurs, it will not reoccur until the the object identified by evthObject falls below evthHysteresis for the duration of evthTimeInterval.
.1.3.6.1.4.1.11.2.3.7.5.8,HP-ICF-OID::advStack24,,,,,,The authoritative identifier for the HP J2601A/B AdvanceStack 10Base-T Hub-24.
.1.3.6.1.4.1.11.2.3.7.5.8.0,ICF-ETWIST::advStack24TrapPrefix,,,,,,
.1.3.6.1.4.1.11.2.3.7.5.8.0.0,ICF-ETWIST::thresholdTrapAS24,,,,,,********* THIS NOTIFICATION IS OBSOLETE ********* A thresholdTrap(0) is specific to ICF devices. It signifies that the threshold entity in the device has detected that the object identified by evthObject has exceeded the threshold identified by evthThreshold during the time interval evthTimeInterval. After this condition occurs, it will not reoccur until the the object identified by evthObject falls below evthHysteresis for the duration of evthTimeInterval.
.1.3.6.1.4.1.11.2.3.7.5.9,HP-ICF-OID::advStack48,,,,,,The authoritative identifier for the HP J2602A/B AdvanceStack 10Base-T Hub-48.
.1.3.6.1.4.1.11.2.3.7.5.9.0,ICF-ETWIST::advStack48TrapPrefix,,,,,,
.1.3.6.1.4.1.11.2.3.7.5.9.0.0,ICF-ETWIST::thresholdTrapAS48,,,,,,********* THIS NOTIFICATION IS OBSOLETE ********* A thresholdTrap(0) is specific to ICF devices. It signifies that the threshold entity in the device has detected that the object identified by evthObject has exceeded the threshold identified by evthThreshold during the time interval evthTimeInterval. After this condition occurs, it will not reoccur until the the object identified by evthObject falls below evthHysteresis for the duration of evthTimeInterval.
.1.3.6.1.4.1.11.2.3.7.5.10,HP-ICF-OID::advStackVg15,,,,,,The authoritative identifier for the HP J2410A AdvanceStack 100VG Hub-15.
.1.3.6.1.4.1.11.2.3.7.5.11,HP-ICF-OID::advStackU8,,,,,,The authoritative identifier for the HP J2610A AdvanceStack 10Base-T Hub-8U.
.1.3.6.1.4.1.11.2.3.7.5.11.0,ICF-ETWIST::advStackU8TrapPrefix,,,,,,
.1.3.6.1.4.1.11.2.3.7.5.11.0.0,ICF-ETWIST::thresholdTrapASU8,,,,,,********* THIS NOTIFICATION IS OBSOLETE ********* A thresholdTrap(0) is specific to ICF devices. It signifies that the threshold entity in the device has detected that the object identified by evthObject has exceeded the threshold identified by evthThreshold during the time interval evthTimeInterval. After this condition occurs, it will not reoccur until the the object identified by evthObject falls below evthHysteresis for the duration of evthTimeInterval.
.1.3.6.1.4.1.11.2.3.7.5.12,HP-ICF-OID::advStackU16,,,,,,The authoritative identifier for the HP J2611A AdvanceStack 10Base-T Hub-16U.
.1.3.6.1.4.1.11.2.3.7.5.12.0,ICF-ETWIST::advStackU16TrapPrefix,,,,,,
.1.3.6.1.4.1.11.2.3.7.5.12.0.0,ICF-ETWIST::thresholdTrapASU16,,,,,,********* THIS NOTIFICATION IS OBSOLETE ********* A thresholdTrap(0) is specific to ICF devices. It signifies that the threshold entity in the device has detected that the object identified by evthObject has exceeded the threshold identified by evthThreshold during the time interval evthTimeInterval. After this condition occurs, it will not reoccur until the the object identified by evthObject falls below evthHysteresis for the duration of evthTimeInterval.
.1.3.6.1.4.1.11.2.3.7.5.13,HP-ICF-OID::advStackVg6,,,,,,The authoritative identifier for the HP J2413A AdvanceStack 100VG Hub-7M.
.1.3.6.1.4.1.11.2.3.7.5.14,HP-ICF-OID::advStackVg12,,,,,,The authoritative identifier for the HP J2415A AdvanceStack 100VG Hub-14.
.1.3.6.1.4.1.11.2.3.7.5.15,HP-ICF-OID::hpAdvStkEnetSH12R,,,,,,The authoritative identifier for the HP J3200A AdvanceStack 10BT Switching Hub-12R.
.1.3.6.1.4.1.11.2.3.7.5.16,HP-ICF-OID::hpAdvStkEnetSH24R,,,,,,The authoritative identifier for the HP J3202A AdvanceStack 10BT Switching Hub-24R.
.1.3.6.1.4.1.11.2.3.7.5.17,HP-ICF-OID::hpAdvStkEnetSH24T,,,,,,The authoritative identifier for the HP J3204A AdvanceStack 10BT Switching Hub-24T.
.1.3.6.1.4.1.11.2.3.7.5.18,HP-ICF-OID::hpAdvStk100Tx12TM,,,,,,The authoritative identifier for the HP J3233A AdvanceStack 100B-TX Hub-12TM w/MGMT.
.1.3.6.1.4.1.11.2.3.7.5.19,HP-ICF-OID::hp10THub16M,,,,,,The authoritative identifier for the HP J3188A 10Base-T Hub-16M.
.1.3.6.1.4.1.11.2.3.7.5.20,HP-ICF-OID::hp10BaseTHub12M,,,,,,The authoritative identifier for the HP J3301A 10Base-T Hub-12M
.1.3.6.1.4.1.11.2.3.7.5.21,HP-ICF-OID::hp10BaseTHub24M,,,,,,The authoritative identifier for the HP J3303A 10Base-T Hub-24M
.1.3.6.1.4.1.11.2.3.7.5.22,HP-ICF-OID::hpProCurve10T100THub12M,,,,,,The authoritative identifier for the HP J3288A 100Base-T Hub 12M
.1.3.6.1.4.1.11.2.3.7.5.23,HP-ICF-OID::hpProCurve10T100THub24M,,,,,,The authoritative identifier for the HP J3289A 100Base-T Hub 24M
.1.3.6.1.4.1.11.2.3.7.8,HP-ICF-OID::chassis,,,,,,
.1.3.6.1.4.1.11.2.3.7.8.1,HP-ICF-OID::repeaterAgent,,,,,,The authoritative identifier for the HP J2603A/B AdvanceStack Ethernet SNMP module.
.1.3.6.1.4.1.11.2.3.7.8.1.0,ICF-ETWIST::repeaterAgentTrapPrefix,,,,,,
.1.3.6.1.4.1.11.2.3.7.8.1.0.0,ICF-ETWIST::thresholdTrapASEN,,,,,,********* THIS NOTIFICATION IS OBSOLETE ********* A thresholdTrap(0) is specific to ICF devices. It signifies that the threshold entity in the device has detected that the object identified by evthObject has exceeded the threshold identified by evthThreshold during the time interval evthTimeInterval. After this condition occurs, it will not reoccur until the the object identified by evthObject falls below evthHysteresis for the duration of evthTimeInterval.
.1.3.6.1.4.1.11.2.3.7.8.1.0.3,ICF-ETWIST::linkBeatTrapASEN,,,,,,********* THIS NOTIFICATION IS OBSOLETE ********* A linkBeatTrap(3) is device type specific to ICF hubs. It signifies that the hub hardware has detected a change of state in a port's link beat status. The current value of the port's link beat status is returned in the PDU.
.1.3.6.1.4.1.11.2.3.7.8.1.0.4,ICF-ETWIST::segmentationTrapASEN,,,,,,********* THIS NOTIFICATION IS OBSOLETE ********* A segmentationTrap(4) is device type specific to ICF hubs. It signifies that the hub hardware has detected a change of state in a port's segmentation status. The current value of the port's segmentation status is returned in the PDU.
.1.3.6.1.4.1.11.2.3.7.8.1.0.5,ICF-ETWIST::backupLinkTrapASEN,,,,,,********* THIS NOTIFICATION IS OBSOLETE ********* A backupLinkTrap(5) is device type specific to most ICF hubs. It signifies that there has been a change in state of rptrPortAdminStatus for a backup port on the hub. The new value of rptrPortAdminStatus is returned in the PDU.
.1.3.6.1.4.1.11.2.3.7.8.1.0.6,ICF-ETWIST::intrusionTrapASEN,,,,,,********* THIS NOTIFICATION IS OBSOLETE ********* An intrusionTrap(6) is device type specific to EtherTwist hubs with revision 'E' firmware or later and AdvanceStack hubs. It signifies that a port security violation has been detected on a port which has the hubSecPtAlarmEnable flag set to 'enabled'. The MAC address of the intruder and the port on which the intrusion occurred are returned in the PDU.
.1.3.6.1.4.1.11.2.3.7.8.1.0.7,ICF-ETWIST::addressMovedTrapASEN,,,,,,********* THIS NOTIFICATION IS OBSOLETE ********* An addressMovedTrap(7) is device type specific to EtherTwist hubs with revision 'E' firmware or later and AdvanceStack hubs. It signifies that a source MAC address which had been operating at one port has moved to a new port. The MAC address that moved, the group and port that the address moved from, and the group and port that the address moved to are returned in the PDU.
.1.3.6.1.4.1.11.2.3.7.8.1.0.8,ICF-ETWIST::newAddressTrapASEN,,,,,,********* THIS NOTIFICATION IS OBSOLETE ********* A newAddressTrap(8) is device type specific to EtherTwist hubs with revision 'E' firmware or later and AdvanceStack hubs. It signifies that a new MAC address has been detected on one of the hub's ports. The instance of rptrAddrTrackLastSourceAddress for the port with the new address is returned in the PDU.
.1.3.6.1.4.1.11.2.3.7.8.2,HP-ICF-OID::chassisAgents,,,,,,
.1.3.6.1.4.1.11.2.3.7.8.2.1,HP-ICF-OID::icfVgAgent,,,,,,The authoritative identifier for the HP J2414A AdvanceStack 100VG/ET SNMP/Bridge Module.
.1.3.6.1.4.1.11.2.3.7.8.2.3,HP-ICF-OID::icfVgAgent2,,,,,,The authoritative identifier for the HP J2414B AdvanceStack 100VG/ET SNMP/Bridge Module.
.1.3.6.1.4.1.11.2.3.7.8.2.4,HP-ICF-OID::hpicfEnetSMM,,,,,,The authoritative identifier for the HPJ3133A AdvanceStack 8U/16U SNMP Module.
.1.3.6.1.4.1.11.2.3.7.8.2.4.0,ICF-ETWIST::hpicfEnetSMMTrapPrefix,,,,,,
.1.3.6.1.4.1.11.2.3.7.8.2.4.0.0,ICF-ETWIST::thresholdTrapSMM,,,,,,********* THIS NOTIFICATION IS OBSOLETE ********* A thresholdTrap(0) is specific to ICF devices. It signifies that the threshold entity in the device has detected that the object identified by evthObject has exceeded the threshold identified by evthThreshold during the time interval evthTimeInterval. After this condition occurs, it will not reoccur until the the object identified by evthObject falls below evthHysteresis for the duration of evthTimeInterval.
.1.3.6.1.4.1.11.2.3.7.8.2.4.0.3,ICF-ETWIST::linkBeatTrapSMM,,,,,,********* THIS NOTIFICATION IS OBSOLETE ********* A linkBeatTrap(3) is device type specific to ICF hubs. It signifies that the hub hardware has detected a change of state in a port's link beat status. The current value of the port's link beat status is returned in the PDU.
.1.3.6.1.4.1.11.2.3.7.8.2.4.0.4,ICF-ETWIST::segmentationTrapSMM,,,,,,********* THIS NOTIFICATION IS OBSOLETE ********* A segmentationTrap(4) is device type specific to ICF hubs. It signifies that the hub hardware has detected a change of state in a port's segmentation status. The current value of the port's segmentation status is returned in the PDU.
.1.3.6.1.4.1.11.2.3.7.8.2.4.0.5,ICF-ETWIST::backupLinkTrapSMM,,,,,,********* THIS NOTIFICATION IS OBSOLETE ********* A backupLinkTrap(5) is device type specific to most ICF hubs. It signifies that there has been a change in state of rptrPortAdminStatus for a backup port on the hub. The new value of rptrPortAdminStatus is returned in the PDU.
.1.3.6.1.4.1.11.2.3.7.8.2.4.0.6,ICF-ETWIST::intrusionTrapSMM,,,,,,********* THIS NOTIFICATION IS OBSOLETE ********* An intrusionTrap(6) is device type specific to EtherTwist hubs with revision 'E' firmware or later and AdvanceStack hubs. It signifies that a port security violation has been detected on a port which has the hubSecPtAlarmEnable flag set to 'enabled'. The MAC address of the intruder and the port on which the intrusion occurred are returned in the PDU.
.1.3.6.1.4.1.11.2.3.7.8.2.4.0.7,ICF-ETWIST::addressMovedTrapSMM,,,,,,********* THIS NOTIFICATION IS OBSOLETE ********* An addressMovedTrap(7) is device type specific to EtherTwist hubs with revision 'E' firmware or later and AdvanceStack hubs. It signifies that a source MAC address which had been operating at one port has moved to a new port. The MAC address that moved, the group and port that the address moved from, and the group and port that the address moved to are returned in the PDU.
.1.3.6.1.4.1.11.2.3.7.8.2.4.0.8,ICF-ETWIST::newAddressTrapSMM,,,,,,********* THIS NOTIFICATION IS OBSOLETE ********* A newAddressTrap(8) is device type specific to EtherTwist hubs with revision 'E' firmware or later and AdvanceStack hubs. It signifies that a new MAC address has been detected on one of the hub's ports. The instance of rptrAddrTrackLastSourceAddress for the port with the new address is returned in the PDU.
.1.3.6.1.4.1.11.2.3.7.8.2.5,HP-ICF-OID::hpAdvStkEnetSHAgent,,,,,,The authoritative identifier for the HPJ3210A AdvanceStack 10BT Switching Hub Management Module.
.1.3.6.1.4.1.11.2.3.7.8.2.6,HP-ICF-OID::hpAdvStkSwStackTopMgmt,,,,,,The authoritative identifier for the HPJ3179A AdvanceStack Switch StackTop Management Module.
.1.3.6.1.4.1.11.2.3.7.8.2.7,HP-ICF-OID::hpSwitch8000CpuCard,,,,,,The authoritative identifier for the HP J4110A Switch 8000M and HP J4121A Switch 4000M CPU card.
.1.3.6.1.4.1.11.2.3.7.8.3,HP-ICF-OID::icfSensors,,,,,,
.1.3.6.1.4.1.11.2.3.7.8.3.1,HP-ICF-OID::icfPowerSupplySensor,,,,,,Identifier for a power supply sensor type.
.1.3.6.1.4.1.11.2.3.7.8.3.2,HP-ICF-OID::icfFanSensor,,,,,,Identifier for a fan sensor type.
.1.3.6.1.4.1.11.2.3.7.8.3.3,HP-ICF-OID::icfTemperatureSensor,,,,,,Identifier for a temperature sensor type.
.1.3.6.1.4.1.11.2.3.7.8.3.4,HP-ICF-OID::icfFutureSlotSensor,,,,,,Identifier for a FutureSlot sensor type.
.1.3.6.1.4.1.11.2.3.7.8.4,HP-ICF-OID::icfCards,,,,,,
.1.3.6.1.4.1.11.2.3.7.8.4.1,HP-ICF-OID::icfUnidentifiedCard,,,,,,Used to indicate that a module is installed in a slot in a chassis, but the agent is unable to identify it.
.1.3.6.1.4.1.11.2.3.7.8.4.2,HP-ICF-OID::hpAdvStkEnetSHSwitch,,,,,,The authoritative identifier for the HP J3212A AdvanceStack 10BT Switching Hub Switch Module.
.1.3.6.1.4.1.11.2.3.7.8.4.3,HP-ICF-OID::hpAdvStkSwStackExpander,,,,,,The authoritative identifier for the HPJ3180A AdvanceStack Switch Stack Expander Module.
.1.3.6.1.4.1.11.2.3.7.8.5,HP-ICF-OID::hpicfStacks,,,,,,
.1.3.6.1.4.1.11.2.3.7.8.5.1,HP-ICF-OID::hpAdvStkEnetSHStack,,,,,,The authoritative identifier for a stack of HP AdvanceStack 10Base-T Switching Hubs.
.1.3.6.1.4.1.11.2.3.7.8.5.2,HP-ICF-OID::hpStack,,,,,,The authoritative identifier for the HP stack of 3800 series switches. The stack can  have the devices like hpSwitchJ9573, hpSwitchJ9574, hpSwitchJ9575, hpSwitchJ9576, hpSwitchJ9584, hpSwitchJ9585, hpSwitchJ9586, hpSwitchJ9587, hpSwitchJ9588.
.1.3.6.1.4.1.11.2.3.7.8.5.3,HP-ICF-OID::hpStack2920,,,,,,The authoritative identifier for the HP stack of 2920 series switches. The stack can include devices like hpSwitchJ9726, hpSwitchJ9727, hpSwitchJ9728, hpSwitchJ9729.
.1.3.6.1.4.1.11.2.3.7.8.5.4,HP-ICF-OID::arubaStack3810,,,,,,The authoritative identifier for a stack of Aruba 3810 series switches. The stack members are aruba3810 subtree devices.
.1.3.6.1.4.1.11.2.3.7.8.5.5,HP-ICF-OID::arubaStack2930,,,,,,The authoritative identifier for a stack of Aruba 2930 series switches.
.1.3.6.1.4.1.11.2.3.7.8.5.6,HP-ICF-OID::hpStackVSF5400R,,,,,,The authoritative identifier for an VSF stack of HP 5400R series switches. The stack members are hpSwitchJ9850A or hpSwitchJ9851A subtree devices.
.1.3.6.1.4.1.11.2.3.7.8.5.7,HP-ICF-OID::arubaStack2930M,,,,,,The authoritative identifier for a BPS stack of Aruba 2930M series switches.
.1.3.6.1.4.1.11.2.3.7.8.6,HP-ICF-OID::hpicfBackplanes,,,,,,
.1.3.6.1.4.1.11.2.3.7.8.6.1,HP-ICF-OID::hpAdvStkEnetSHExtSeg,,,,,,The authoritative identifier for an inter-box repeater segment in a stack of HP AdvanceStack 10Base-T Switching Hubs.
.1.3.6.1.4.1.11.2.3.7.8.6.2,HP-ICF-OID::hpAdvStkEnetSHIntSeg,,,,,,The authoritative identifier for a repeater segment that is internal to a single box in a stack of HP AdvanceStack 10Base-T Switching Hubs.
.1.3.6.1.4.1.11.2.3.7.8.6.3,HP-ICF-OID::hp10BaseTHubSeg,,,,,,The authoritative identifier for a repeater segment in an HP 10Base-T Hub-12M or HP 10Base-T Hub-24M.
.1.3.6.1.4.1.11.2.3.7.8.6.4,HP-ICF-OID::hpSwitchBackplane,,,,,,The authoritative identifier for an HP Switch backplane.
.1.3.6.1.4.1.11.2.3.7.8.6.5,HP-ICF-OID::hp100BaseTHubSeg,,,,,,The authoritative identifier for a repeater segment in an HP 100Base-T Hub 12M or HP 100Base-T Hub 24M.
.1.3.6.1.4.1.11.2.3.7.8.7,HP-ICF-OID::hpicfSlots,,,,,,
.1.3.6.1.4.1.11.2.3.7.8.7.1,HP-ICF-OID::hpAdvStkEnetSHAgentSlot,,,,,,The authoritative identifier for the Management Slot in an HP AdvanceStack 10Base-T Switching Hub.
.1.3.6.1.4.1.11.2.3.7.8.7.2,HP-ICF-OID::hpAdvStkEnetSHIOSlot,,,,,,The authoritative identifier for the Expansion Slot in an HP AdvanceStack 10Base-T Switching Hub.
.1.3.6.1.4.1.11.2.3.7.8.7.3,HP-ICF-OID::hpAdvStkSwStackMgmtSlot,,,,,,The authoritative identifier for the Management/Stacking Slot in an HP AdvanceStack Switch 208 or Switch 224.
.1.3.6.1.4.1.11.2.3.7.8.7.4,HP-ICF-OID::hpAdvStkSwStackExpSlot,,,,,,The authoritative identifier for the Expansion Slot in an HP AdvanceStack Switch 208 or Switch 224.
.1.3.6.1.4.1.11.2.3.7.8.7.5,HP-ICF-OID::hpSwitch8000PowerSupplyBay,,,,,,The authoritative identifier for a power supply bay in an HP Switch 8000 or HP Switch 4000.
.1.3.6.1.4.1.11.2.3.7.8.7.6,HP-ICF-OID::hpSwitch8000CpuSlot,,,,,,The authoritative identifier for the CPU slot in an HP Switch 8000 or HP Switch 4000.
.1.3.6.1.4.1.11.2.3.7.8.7.7,HP-ICF-OID::hpSwitch8000PortSlot,,,,,,The authoritative identifier for a port module slot in an HP Switch 8000, HP Switch 4000, HP Switch 1600, or HP Switch 2400/2424.
.1.3.6.1.4.1.11.2.3.7.8.7.8,HP-ICF-OID::hpSwitch2524PortSlot,,,,,,The authoritative identifier for a port module slot in an HP Switch 2524, HP Switch 2512, or HP Network Blade.
.1.3.6.1.4.1.11.2.3.7.8.7.9,HP-ICF-OID::hpSwitch5308PowerSupplyBay,,,,,,The authoritative identifier for a power supply bay in an HP 5308XL Switch or HP 5304XL Switch.
.1.3.6.1.4.1.11.2.3.7.8.7.10,HP-ICF-OID::hpSwitch5308PortSlot,,,,,,The authoritative identifier for a port module slot in an HP 5308XL Switch, HP 5304XL Switch, HP 3324XL Switch, or HP 3124XL Switch.
.1.3.6.1.4.1.11.2.3.7.8.7.11,HP-ICF-OID::hpSwitch4865PowerSupplyBay,,,,,,The authoritative identifier for a power supply bay in an HP 4108GL Switch.
.1.3.6.1.4.1.11.2.3.7.8.7.12,HP-ICF-OID::hpSwitch4865PortSlot,,,,,,The authoritative identifier for a port module slot in an HP 4108GL Switch.
.1.3.6.1.4.1.11.2.3.7.8.7.13,HP-ICF-OID::hpSwitch2650PortSlot,,,,,,The authoritative identifier for a port module slot in an HP 2650 Switch.
.1.3.6.1.4.1.11.2.3.7.8.7.14,HP-ICF-OID::hpSwitch6108PortSlot,,,,,,The authoritative identifier for a port module slot in an HP 6108 Switch.
.1.3.6.1.4.1.11.2.3.7.8.7.15,HP-ICF-OID::hpSwitch2824PortSlot,,,,,,The authoritative identifier for a port module slot in an HP 2824 Switch or HP 2848 Switch.
.1.3.6.1.4.1.11.2.3.7.8.7.16,HP-ICF-OID::hpSwitch2626PortSlot,,,,,,The authoritative identifier for a port module slot in an HP 2626 Switch.
.1.3.6.1.4.1.11.2.3.7.8.7.17,HP-ICF-OID::hpSwitch2650PPortSlot,,,,,,The authoritative identifier for a port module slot in an HP 2650-PWR Switch.
.1.3.6.1.4.1.11.2.3.7.8.7.18,HP-ICF-OID::hpSwitch2626PPortSlot,,,,,,The authoritative identifier for a port module slot in an HP 2626-PWR Switch.
.1.3.6.1.4.1.11.2.3.7.8.7.19,HP-ICF-OID::hpSwitch3324PortSlot,,,,,,The authoritative identifier for a port module slot in an HP 3324 Switch or HP 3348 Switch.
.1.3.6.1.4.1.11.2.3.7.8.7.20,HP-ICF-OID::hpSwitch2650CRPortSlot,,,,,,The authoritative identifier for a port module slot in an HP 2650-CR Switch.
.1.3.6.1.4.1.11.2.3.7.8.7.21,HP-ICF-OID::hpSwitch2626CRPortSlot,,,,,,The authoritative identifier for a port module slot in an HP 2626-CR Switch.
.1.3.6.1.4.1.11.2.3.7.8.7.22,HP-ICF-OID::hpSwitch2600n8PPortSlot,,,,,,The authoritative identifier for a port module slot in an HP 2600-8-PWR Switch.
.1.3.6.1.4.1.11.2.3.7.8.7.23,HP-ICF-OID::hpSwitch869xPowerSupplyBay,,,,,,The authoritative identifier for a power supply bay in an HP 5406 zl2 Switch Chassis or HP 5412 zl2 Switch Chassis.
.1.3.6.1.4.1.11.2.3.7.8.7.24,HP-ICF-OID::hpSwitch869xPortSlot,,,,,,The authoritative identifier for a port module slot in an HP 5406 zl2 Switch Chassis, HP 5412 zl2 Switch Chassis,HP E3800 Switch, HP 3500yl-24G-PWR Switch, HP 3500yl-48G-PWR Switch, and HP 6200yl-24G-mGBIC Switch.
.1.3.6.1.4.1.11.2.3.7.8.7.25,HP-ICF-OID::hpSwitch2510PortSlot,,,,,,The authoritative identifier for a port module slot in an HP 2510-24 Switch or HP 2510-48 Switch.
.1.3.6.1.4.1.11.2.3.7.8.7.26,HP-ICF-OID::hpSwitch2810PortSlot,,,,,,The authoritative identifier for a port module slot in an HP 2810-24G Switch or HP 2810-48G Switch .
.1.3.6.1.4.1.11.2.3.7.8.7.27,HP-ICF-OID::hpSwitch5400CpuCardBay,,,,,,The authoritative identifier for a Management Module bay in a HP 54XXZL Switch or HP 8212ZL Switch .
.1.3.6.1.4.1.11.2.3.7.8.7.28,HP-ICF-OID::hpSwitch8212FabricBay,,,,,,The authoritative identifier for a Fabric bay in a HP 8212ZL Switch .
.1.3.6.1.4.1.11.2.3.7.8.7.29,HP-ICF-OID::hpSwitch2610PortSlot,,,,,,The authoritative identifier for a port module slot in an HP 2610-24 Switch or HP 2610-48 Switch.
.1.3.6.1.4.1.11.2.3.7.8.7.30,HP-ICF-OID::hpSwitch2610PPortSlot,,,,,,The authoritative identifier for a port module slot in an HP 2610-24-PWR Switch, HP 2610-48-PWR Switch or HP 2610-24/12PWR Switch.
.1.3.6.1.4.1.11.2.3.7.8.7.31,HP-ICF-OID::hpSwitch2510BPortSlot,,,,,,The authoritative identifier for a port module slot in an HP 2510B-24 Switch.
.1.3.6.1.4.1.11.2.3.7.8.7.32,HP-ICF-OID::hpSwitch2626CPortSlot,,,,,,The authoritative identifier for a port module slot in an HP 2626C Switch.
.1.3.6.1.4.1.11.2.3.7.8.7.33,HP-ICF-OID::hpSwitch2650CPortSlot,,,,,,The authoritative identifier for a port module slot in an HP 2650C Switch.
.1.3.6.1.4.1.11.2.3.7.8.7.34,HP-ICF-OID::hpSwitch2910PortSlot,,,,,,The authoritative identifier for a port module slot in an HP 2910al-24G Switch or HP 2910al-48G Switch.
.1.3.6.1.4.1.11.2.3.7.8.7.35,HP-ICF-OID::hpSwitch2510GPortSlot,,,,,,The authoritative identifier for a port module slot in an HP 2510G-24 Switch or HP 2510G-48 Switch.
.1.3.6.1.4.1.11.2.3.7.8.7.36,HP-ICF-OID::hpSwitch2520PortSlot,,,,,,The authoritative identifier for a port module slot in an HP 2520-24 Switch or HP 2520-8 Switch.
.1.3.6.1.4.1.11.2.3.7.8.7.37,HP-ICF-OID::hpSwitch2520GPortSlot,,,,,,The authoritative identifier for a port module slot in an HP 2520G-24 Switch or HP 2520G-8 Switch.
.1.3.6.1.4.1.11.2.3.7.8.7.38,HP-ICF-OID::hpSwitch2615PortSlot,,,,,,The authoritative identifier for a port module slot in an HP 2615-8-PoE Switch.
.1.3.6.1.4.1.11.2.3.7.8.7.39,HP-ICF-OID::hpSwitch2915PortSlot,,,,,,The authoritative identifier for a port module slot in an HP 2915-8G-PoE Switch.
.1.3.6.1.4.1.11.2.3.7.8.7.40,HP-ICF-OID::hpSwitchJ9580PowerSupply,,,,,,The authoritative identifier for the HP X312 1000W 100-240VAC to 54VDC PS.
.1.3.6.1.4.1.11.2.3.7.8.7.41,HP-ICF-OID::hpSwitchJ9581PowerSupply,,,,,,The authoritative identifier for the HP X311 400W 100-240VAC to 12VDC PS.
.1.3.6.1.4.1.11.2.3.7.8.7.42,HP-ICF-OID::hpSwitchJ9582FanTray,,,,,,The authoritative identifier for the HP E3800 Switch Fan Tray.
.1.3.6.1.4.1.11.2.3.7.8.7.43,HP-ICF-OID::hpSwitch2620PortSlot,,,,,,The authoritative identifier for a port module slot in an HP 2620-24 Switch or HP 2620-48 Switch.
.1.3.6.1.4.1.11.2.3.7.8.7.45,HP-ICF-OID::hpSwitch2530PortSlot,,,,,,The authoritative identifier for a port module slot in an HP 2530 Switch.
.1.3.6.1.4.1.11.2.3.7.8.7.46,HP-ICF-OID::hpSwitch2920StackingSlot,,,,,,The authoritative identifier for a stacking module slot in an HP E2920-24 Switch or HP E2920-48 Switch.
.1.3.6.1.4.1.11.2.3.7.8.7.47,HP-ICF-OID::hpSwitchJ9737APowerSupply,,,,,,The authoritative identifier for the HP 2920 X332 1050W 100-240VAC to 54VDC Power Supply.
.1.3.6.1.4.1.11.2.3.7.8.7.48,HP-ICF-OID::hpSwitchJ9738APowerSupply,,,,,,The authoritative identifier for the HP 2920 X332 575W 100-240VAC to 54VDC Power Supply.
.1.3.6.1.4.1.11.2.3.7.8.7.49,HP-ICF-OID::hpSwitchJ9739APowerSupply,,,,,,The authoritative identifier for the HP J9739A X331 165W 100-240VAC to 12VDC Power Supply
.1.3.6.1.4.1.11.2.3.7.8.7.50,HP-ICF-OID::hpSwitch2920PortSlot,,,,,,The authoritative identifier for a port module slot in an HP E2920-24 Switch or HP E2920-48 Switch.
.1.3.6.1.4.1.11.2.3.7.8.7.51,HP-ICF-OID::hpSwitch3800StackingSlot,,,,,,The authoritative identifier for a stacking module slot in an HP E3800 Switch.
.1.3.6.1.4.1.11.2.3.7.8.7.52,HP-ICF-OID::hpSwitchJ9828APowerSupply,,,,,,The authoritative identifier for the HP 5400R 700W PoE+ zl2 Power Supply
.1.3.6.1.4.1.11.2.3.7.8.7.53,HP-ICF-OID::hpSwitchJ9829APowerSupply,,,,,,The authoritative identifier for the HP 5400R 1100W PoE+ zl2 Power Supply
.1.3.6.1.4.1.11.2.3.7.8.7.54,HP-ICF-OID::hpSwitchJ9830APowerSupply,,,,,,The authoritative identifier for the HP 5400R 2750W PoE+ zl2 Power Supply
.1.3.6.1.4.1.11.2.3.7.8.7.55,HP-ICF-OID::hpSwitchJ9831AFanTray,,,,,,The authoritative identifier for the HP 5406R zl2 Switch Fan Tray.
.1.3.6.1.4.1.11.2.3.7.8.7.56,HP-ICF-OID::hpSwitchJ9832AFanTray,,,,,,The authoritative identifier for the HP 5412R zl2 Switch Fan Tray.
.1.3.6.1.4.1.11.2.3.7.8.7.57,HP-ICF-OID::hpSwitchJ9805APowerSupply,,,,,,The authoritative identifier for the HP 640 External/Redundant Power Supply.
.1.3.6.1.4.1.11.2.3.7.8.7.58,HP-ICF-OID::hpSwitchJ9806APowerCable,,,,,,The authoritative identifier for the HP 640 EPS/RPS 1m Cable.
.1.3.6.1.4.1.11.2.3.7.8.7.59,HP-ICF-OID::arubaJL085APowerSupply,,,,,,The authoritative identifier for the Aruba X371 12VDC 250W 100-240VAC Power Supply.
.1.3.6.1.4.1.11.2.3.7.8.7.60,HP-ICF-OID::arubaJL086APowerSupply,,,,,,The authoritative identifier for the Aruba X372 54VDC 680W 100-240VAC Power Supply.
.1.3.6.1.4.1.11.2.3.7.8.7.61,HP-ICF-OID::arubaJL087APowerSupply,,,,,,The authoritative identifier for the Aruba X372 54VDC 1050W 100-240VAC Power Supply.
.1.3.6.1.4.1.11.2.3.7.8.8,HP-ICF-OID::hpicfHubPorts,,,,,,
.1.3.6.1.4.1.11.2.3.7.8.8.1,HP-ICF-OID::hpAdvStkEnetSHExtPort,,,,,,The authoritative identifier for a repeater port which has an external connector on an HP AdvanceStack 10Base-T Switching Hub.
.1.3.6.1.4.1.11.2.3.7.8.8.2,HP-ICF-OID::hpAdvStkEnetSHIntPort,,,,,,The authoritative identifier for a repeater port which does not have an external connector on an HP AdvanceStack 10Base-T Switching Hub. This port may be used to connect to an interface on an expansion module.
.1.3.6.1.4.1.11.2.3.7.8.8.3,HP-ICF-OID::hpAdvStkEnetSHAgentPort,,,,,,The authoritative identifier for an internal repeater port used to connect to an interface on a management module in an HP AdvanceStack 10Base-T Switching Hub.
.1.3.6.1.4.1.11.2.3.7.8.8.4,HP-ICF-OID::hp10BaseTHubPort,,,,,,The authoritative identifier for a repeater port which has an external connector on an HP 10Base-T Hub-12M or an HP 10Base-T Hub-24M.
.1.3.6.1.4.1.11.2.3.7.8.8.5,HP-ICF-OID::hp10BaseTHubAgentPort,,,,,,The authoritative identifier for an internal repeater port used to connect to an agent interface in an HP 10Base-T Hub-12M or an HP 10Base-T Hub-24M.
.1.3.6.1.4.1.11.2.3.7.8.8.6,HP-ICF-OID::hp10T100THubPort,,,,,,The authoritative identifier for a 10/100 repeater port that has an external connector on an HP 100Base-T Hub.
.1.3.6.1.4.1.11.2.3.7.8.8.7,HP-ICF-OID::hp100BaseTHubAgentPort,,,,,,The authoritative identifier for an internal 100Mbit repeater port used to connect to an agent interface in an HP 100Base-T Hub.
.1.3.6.1.4.1.11.2.3.7.8.9,HP-ICF-OID::hpicfEnetChipSets,,,,,,
.1.3.6.1.4.1.11.2.3.7.8.9.1,HP-ICF-OID::hpicfEnetChipSetHydra,,,,,,The authoritative identifier for the HP Hydra 4-interface Ethernet LAN controller.
.1.3.6.1.4.1.11.2.3.7.8.9.2,HP-ICF-OID::hpicfEnetChipSetGT48001,,,,,,The authoritative identifier for the GT48001 8-interface switch chip.
.1.3.6.1.4.1.11.2.3.7.8.9.3,HP-ICF-OID::hpicfEnetChipSetPentagon,,,,,,The authoritative identifier for the HP Pentagon ASIC.
.1.3.6.1.4.1.11.2.3.7.8.10,HP-ICF-OID::hpicfSwitchPorts,,,,,,
.1.3.6.1.4.1.11.2.3.7.8.10.1,HP-ICF-OID::hpicfSwitchPort10T100TX,,,,,,The authoritative identifier for an IEEE 802.3 10BASE-T/100BASE-TX autonegotiating port on an HP switch.
.1.3.6.1.4.1.11.2.3.7.8.10.2,HP-ICF-OID::hpicfSwitchPort100FX,,,,,,The authoritative identifier for an IEEE 802.3 100BASE-FX port on an HP switch.
.1.3.6.1.4.1.11.2.3.7.8.10.3,HP-ICF-OID::hpicfSwitchPort10FL,,,,,,The authoritative identifier for an IEEE 802.3 10BASE-FL port on an HP switch.
.1.3.6.1.4.1.11.2.3.7.8.10.4,HP-ICF-OID::hpicfSwitchPort1000SX,,,,,,The authoritative identifier for an IEEE 802.3 1000BASE-SX port on an HP switch.
.1.3.6.1.4.1.11.2.3.7.8.10.5,HP-ICF-OID::hpicfSwitchPort10T,,,,,,The authoritative identifier for an IEEE 802.3 10BASE-T port on an HP switch.
.1.3.6.1.4.1.11.2.3.7.8.10.6,HP-ICF-OID::hpicfSwitchPort1000LX,,,,,,The authoritative identifier for an IEEE 802.3 1000BASE-LX port on an HP switch.
.1.3.6.1.4.1.11.2.3.7.8.10.7,HP-ICF-OID::hpicfSwitchPort1000T,,,,,,The authoritative identifier for an IEEE 802.3 1000BASE-T port on an HP switch.
.1.3.6.1.4.1.11.2.3.7.8.10.8,HP-ICF-OID::hpicfSwitchPort1000Stk,,,,,,The authoritative identifier for an IEEE 802.3 1000BASE-Stk port on an HP switch.
.1.3.6.1.4.1.11.2.3.7.8.10.9,HP-ICF-OID::hpicfSwitchPort1000LH,,,,,,The authoritative identifier for an IEEE 802.3 1000BASE-LH port on an HP switch.
.1.3.6.1.4.1.11.2.3.7.8.10.10,HP-ICF-OID::hpicfSwitchPort10GigBaseCX4,,,,,,The authoritative identifier for an IEEE 802.3 10GIGBASE-CX4 port on an HP switch.
.1.3.6.1.4.1.11.2.3.7.8.10.11,HP-ICF-OID::hpicfSwitchPort1000ESP,,,,,,The authoritative identifier for an internal ESP Blade port on an HP switch.
.1.3.6.1.4.1.11.2.3.7.8.10.12,HP-ICF-OID::hpicfSwitchPort10GigBaseSR,,,,,,The authoritative identifier for an IEEE 802.3 10GIGBASE-SR port on an HP switch.
.1.3.6.1.4.1.11.2.3.7.8.10.13,HP-ICF-OID::hpicfSwitchPort10GigBaseER,,,,,,The authoritative identifier for an IEEE 802.3 10GIGBASE-ER port on an HP switch.
.1.3.6.1.4.1.11.2.3.7.8.10.14,HP-ICF-OID::hpicfSwitchPort10GigBaseLR,,,,,,The authoritative identifier for an IEEE 802.3 10GIGBASE-LR port on an HP switch.
.1.3.6.1.4.1.11.2.3.7.8.10.15,HP-ICF-OID::hpicfSwitchPort100GEN,,,,,,The authoritative identifier for a generic 100BASE port on an HP switch.
.1.3.6.1.4.1.11.2.3.7.8.10.16,HP-ICF-OID::hpicfSwitchPort1000GEN,,,,,,The authoritative identifier for a generic 1000BASE port on an HP switch.
.1.3.6.1.4.1.11.2.3.7.8.10.17,HP-ICF-OID::hpicfSwitchPort10GigBaseGEN,,,,,,The authoritative identifier for a generic 10Gig port on an HP switch.
.1.3.6.1.4.1.11.2.3.7.8.10.18,HP-ICF-OID::hpicfSwitchPort100BXD,,,,,,The authoritative identifier for an IEEE 802.3 100BASE-BX downstream port on an HP switch.
.1.3.6.1.4.1.11.2.3.7.8.10.19,HP-ICF-OID::hpicfSwitchPort100BXU,,,,,,The authoritative identifier for an IEEE 802.3 100BASE-BX upstream port on an HP switch.
.1.3.6.1.4.1.11.2.3.7.8.10.20,HP-ICF-OID::hpicfSwitchPort1000BXD,,,,,,The authoritative identifier for an IEEE 802.3 1000BASE-BX downstream port on an HP switch.
.1.3.6.1.4.1.11.2.3.7.8.10.21,HP-ICF-OID::hpicfSwitchPort1000BXU,,,,,,The authoritative identifier for an IEEE 802.3 1000BASE-BX upstream port on an HP switch.
.1.3.6.1.4.1.11.2.3.7.8.10.22,HP-ICF-OID::hpicfSwitchPort10GigBaseLRM,,,,,,The authoritative identifier for an IEEE 802.3 10GIGBASE-LRM port on an HP switch.
.1.3.6.1.4.1.11.2.3.7.8.10.23,HP-ICF-OID::hpicfSwitchPortSFPplusSR,,,,,,The authoritative identifier for an IEEE 802.3 10GIGBASE-SR SFP+ port on an HP switch.
.1.3.6.1.4.1.11.2.3.7.8.10.24,HP-ICF-OID::hpicfSwitchPortSFPplusLR,,,,,,The authoritative identifier for an IEEE 802.3 10GIGBASE-LR SFP+ port on an HP switch.
.1.3.6.1.4.1.11.2.3.7.8.10.25,HP-ICF-OID::hpicfSwitchPortSFPplusLRM,,,,,,The authoritative identifier for an IEEE 802.3 10GIGBASE-LRM SFP+ port on an HP switch.
.1.3.6.1.4.1.11.2.3.7.8.10.26,HP-ICF-OID::hpicfSwitchPortSFPplusDAC,,,,,,The authoritative identifier for a 10 GIG DAC SFP+ port on an HP switch.
.1.3.6.1.4.1.11.2.3.7.8.10.27,HP-ICF-OID::hpicfSwitchPortSFPplusDA1,,,,,,The authoritative identifier for a 1 meter 10 GIG DAC SFP+ port on an HP switch.
.1.3.6.1.4.1.11.2.3.7.8.10.28,HP-ICF-OID::hpicfSwitchPortSFPplusDA2,,,,,,The authoritative identifier for a 2 meter 10 GIG DAC SFP+ port on an HP switch.
.1.3.6.1.4.1.11.2.3.7.8.10.29,HP-ICF-OID::hpicfSwitchPortSFPplusDA3,,,,,,The authoritative identifier for a 3 meter 10 GIG DAC SFP+ port on an HP switch.
.1.3.6.1.4.1.11.2.3.7.8.10.30,HP-ICF-OID::hpicfSwitchPortSFPplusDA5,,,,,,The authoritative identifier for a 5 meter 10 GIG DAC SFP+ port on an HP switch.
.1.3.6.1.4.1.11.2.3.7.8.10.31,HP-ICF-OID::hpicfSwitchPortSFPplusDA7,,,,,,The authoritative identifier for a 7 meter 10 GIG DAC SFP+ port on an HP switch.
.1.3.6.1.4.1.11.2.3.7.8.10.32,HP-ICF-OID::hpicfSwitchPortSFPplusDA10,,,,,,The authoritative identifier for a 10 meter 10 GIG DAC SFP+ port on an HP switch.
.1.3.6.1.4.1.11.2.3.7.8.10.33,HP-ICF-OID::hpicfSwitchPortSFPplusDA15,,,,,,The authoritative identifier for a 15 meter 10 GIG DAC SFP+ port on an HP switch.
.1.3.6.1.4.1.11.2.3.7.8.10.34,HP-ICF-OID::hpicfSwitchPortSFPplusDA20,,,,,,The authoritative identifier for a 20 meter 10 GIG DAC SFP+ port on an HP switch.
.1.3.6.1.4.1.11.2.3.7.8.10.35,HP-ICF-OID::hpicfSwitchPort10GigBaseT,,,,,,The authoritative identifier for a 10 GIG T port on an HP switch.
.1.3.6.1.4.1.11.2.3.7.8.10.36,HP-ICF-OID::hpicfSwitchPort10GigBaseTSH,,,,,,The authoritative identifier for a 10 GIG TSH port on an HP switch.
.1.3.6.1.4.1.11.2.3.7.8.10.37,HP-ICF-OID::hpicfSwitchPort10GigBaseTLH,,,,,,The authoritative identifier for a 10 GIG TLH port on an HP switch.
.1.3.6.1.4.1.11.2.3.7.8.10.38,HP-ICF-OID::hpicfSwitchPort10GigBaseSTK,,,,,,The authoritative identifier for a 10 GIG stacking port on an HP switch.
.1.3.6.1.4.1.11.2.3.7.8.10.39,HP-ICF-OID::hpicfSwitchPort1000CWDM1470,,,,,,The authoritative identifier for an IEEE 802.3 1000BASE-CWDM1470 port on an HP switch.
.1.3.6.1.4.1.11.2.3.7.8.10.40,HP-ICF-OID::hpicfSwitchPort1000CWDM1490,,,,,,The authoritative identifier for an IEEE 802.3 1000BASE-CWDM1490 port on an HP switch.
.1.3.6.1.4.1.11.2.3.7.8.10.41,HP-ICF-OID::hpicfSwitchPort1000CWDM1510,,,,,,The authoritative identifier for an IEEE 802.3 1000BASE-CWDM1510 port on an HP switch.
.1.3.6.1.4.1.11.2.3.7.8.10.42,HP-ICF-OID::hpicfSwitchPort1000CWDM1530,,,,,,The authoritative identifier for an IEEE 802.3 1000BASE-CWDM1530 port on an HP switch.
.1.3.6.1.4.1.11.2.3.7.8.10.43,HP-ICF-OID::hpicfSwitchPort1000CWDM1550,,,,,,The authoritative identifier for an IEEE 802.3 1000BASE-CWDM1550 port on an HP switch.
.1.3.6.1.4.1.11.2.3.7.8.10.44,HP-ICF-OID::hpicfSwitchPort1000CWDM1570,,,,,,The authoritative identifier for an IEEE 802.3 1000BASE-CWDM1570 port on an HP switch.
.1.3.6.1.4.1.11.2.3.7.8.10.45,HP-ICF-OID::hpicfSwitchPort1000CWDM1590,,,,,,The authoritative identifier for an IEEE 802.3 1000BASE-CWDM1590 port on an HP switch.
.1.3.6.1.4.1.11.2.3.7.8.10.46,HP-ICF-OID::hpicfSwitchPort1000CWDM1610,,,,,,The authoritative identifier for an IEEE 802.3 1000BASE-CWDM1610 port on an HP switch.
.1.3.6.1.4.1.11.2.3.7.8.10.47,HP-ICF-OID::hpicfSwitchPort10GigCWDM1470,,,,,,The authoritative identifier for an IEEE 802.3 10GIGBASE-CWDM1470 SFP+ port on an HP switch.
.1.3.6.1.4.1.11.2.3.7.8.10.48,HP-ICF-OID::hpicfSwitchPort10GigCWDM1490,,,,,,The authoritative identifier for an IEEE 802.3 10GIGBASE-CWDM1490 SFP+ port on an HP switch.
.1.3.6.1.4.1.11.2.3.7.8.10.49,HP-ICF-OID::hpicfSwitchPort10GigCWDM1510,,,,,,The authoritative identifier for an IEEE 802.3 10GIGBASE-CWDM1510 SFP+ port on an HP switch.
.1.3.6.1.4.1.11.2.3.7.8.10.50,HP-ICF-OID::hpicfSwitchPort10GigCWDM1530,,,,,,The authoritative identifier for an IEEE 802.3 10GIGBASE-CWDM1530 SFP+ port on an HP switch.
.1.3.6.1.4.1.11.2.3.7.8.10.51,HP-ICF-OID::hpicfSwitchPort10GigCWDM1550,,,,,,The authoritative identifier for an IEEE 802.3 10GIGBASE-CWDM1550 SFP+ port on an HP switch.
.1.3.6.1.4.1.11.2.3.7.8.10.52,HP-ICF-OID::hpicfSwitchPort10GigCWDM1570,,,,,,The authoritative identifier for an IEEE 802.3 10GIGBASE-CWDM1570 SFP+ port on an HP switch.
.1.3.6.1.4.1.11.2.3.7.8.10.53,HP-ICF-OID::hpicfSwitchPort10GigCWDM1590,,,,,,The authoritative identifier for an IEEE 802.3 10GIGBASE-CWDM1590 SFP+ port on an HP switch.
.1.3.6.1.4.1.11.2.3.7.8.10.54,HP-ICF-OID::hpicfSwitchPort10GigCWDM1611,,,,,,The authoritative identifier for an IEEE 802.3 10GIGBASE-CWDM1611 SFP+ port on an HP switch.
.1.3.6.1.4.1.11.2.3.7.8.10.55,HP-ICF-OID::hpicfSwitchPort5GigBaseT,,,,,,The authoritative identifier for a 5GBASE-T port on an Aruba switch.
.1.3.6.1.4.1.11.2.3.7.8.11,HP-ICF-OID::hpicfMAUTypes,,,,,,
.1.3.6.1.4.1.11.2.3.7.8.11.1,HP-ICF-OID::hpicfMauType1000BaseSXHD,,,,,,IEEE 802.3 X fiber over short-wavelength laser PMD (clause 38), half-duplex.
.1.3.6.1.4.1.11.2.3.7.8.11.2,HP-ICF-OID::hpicfMauType1000BaseSXFD,,,,,,IEEE 802.3 X fiber over short-wavelength laser PMD (clause 38), full-duplex.
.1.3.6.1.4.1.11.2.3.7.8.11.3,HP-ICF-OID::hpicfMauType1000BaseLXHD,,,,,,IEEE 802.3 X fiber over long-wavelength laser PMD (clause 38), half-duplex.
.1.3.6.1.4.1.11.2.3.7.8.11.4,HP-ICF-OID::hpicfMauType1000BaseLXFD,,,,,,IEEE 802.3 X fiber over long-wavelength laser PMD (clause 38), full-duplex.
.1.3.6.1.4.1.11.2.3.7.8.11.5,HP-ICF-OID::hpicfMauType1000BaseTHD,,,,,,IEEE 802.3 four-pair Category 5 UTP PHY (clause 40), half-duplex.
.1.3.6.1.4.1.11.2.3.7.8.11.6,HP-ICF-OID::hpicfMauType1000BaseTFD,,,,,,IEEE 802.3 four-pair Category 5 UTP PHY (clause 40), full-duplex.
.1.3.6.1.4.1.11.2.3.7.8.11.7,HP-ICF-OID::hpicfMauType1000BaseStkHD,,,,,,IEEE 802.3 X copper, half-duplex.
.1.3.6.1.4.1.11.2.3.7.8.11.8,HP-ICF-OID::hpicfMauType1000BaseStkFD,,,,,,IEEE 802.3 X copper, full-duplex.
.1.3.6.1.4.1.11.2.3.7.8.11.9,HP-ICF-OID::hpicfMauType1000BaseLHFD,,,,,,Proprietary Long Haul, Fiber full-duplex.
.1.3.6.1.4.1.11.2.3.7.8.11.10,HP-ICF-OID::hpicfMauType1000BaseEspPCS,,,,,,Proprietary internal, PCS port.
.1.3.6.1.4.1.11.2.3.7.8.11.11,HP-ICF-OID::hpicfMauType1000BaseEspG,,,,,,Proprietary internal, GMII port.
.1.3.6.1.4.1.11.2.3.7.8.11.12,HP-ICF-OID::hpicfMauType10GigBaseCX4,,,,,,Proprietary 10Gig CX4, full-duplex.
.1.3.6.1.4.1.11.2.3.7.8.11.13,HP-ICF-OID::hpicfMauType10GigBaseSR,,,,,,Proprietary 10Gig SR, full-duplex.
.1.3.6.1.4.1.11.2.3.7.8.11.14,HP-ICF-OID::hpicfMauType10GigBaseER,,,,,,Proprietary 10Gig ER, full-duplex.
.1.3.6.1.4.1.11.2.3.7.8.11.15,HP-ICF-OID::hpicfMauType10GigBaseLR,,,,,,Proprietary 10Gig LR, full-duplex.
.1.3.6.1.4.1.11.2.3.7.8.11.16,HP-ICF-OID::hpicfMauType100BaseGEN,,,,,,Proprietary 100Base Generic, full-duplex.
.1.3.6.1.4.1.11.2.3.7.8.11.17,HP-ICF-OID::hpicfMauType1000BaseGEN,,,,,,Proprietary 1000Base Generic, full-duplex.
.1.3.6.1.4.1.11.2.3.7.8.11.18,HP-ICF-OID::hpicfMauType10GigBaseGEN,,,,,,Proprietary 10Gig Generic, full-duplex.
.1.3.6.1.4.1.11.2.3.7.8.11.19,HP-ICF-OID::hpicfMauType100BaseBXD,,,,,,Proprietary 100Base BX downstream, full-duplex.
.1.3.6.1.4.1.11.2.3.7.8.11.20,HP-ICF-OID::hpicfMauType100BaseBXU,,,,,,Proprietary 100Base BX upstream, full-duplex.
.1.3.6.1.4.1.11.2.3.7.8.11.21,HP-ICF-OID::hpicfMauType1000BaseBXD,,,,,,Proprietary 1000Base BX downstream, full-duplex.
.1.3.6.1.4.1.11.2.3.7.8.11.22,HP-ICF-OID::hpicfMauType1000BaseBXU,,,,,,Proprietary 1000Base BX upstream, full-duplex.
.1.3.6.1.4.1.11.2.3.7.8.11.23,HP-ICF-OID::hpicfMauType10GigBaseLRM,,,,,,Proprietary 10Gig LRM, full-duplex.
.1.3.6.1.4.1.11.2.3.7.8.11.24,HP-ICF-OID::hpicfMauTypeSFPplusSR,,,,,,Proprietary 10Gig SR SFP+, full-duplex.
.1.3.6.1.4.1.11.2.3.7.8.11.25,HP-ICF-OID::hpicfMauTypeSFPplusLR,,,,,,Proprietary 10Gig LR SFP+, full-duplex.
.1.3.6.1.4.1.11.2.3.7.8.11.26,HP-ICF-OID::hpicfMauTypeSFPplusLRM,,,,,,Proprietary 10Gig LRM SFP+, full-duplex.
.1.3.6.1.4.1.11.2.3.7.8.11.27,HP-ICF-OID::hpicfMauTypeSFPplusDAC,,,,,,Proprietary 10Gig DAC SFP+, full-duplex.
.1.3.6.1.4.1.11.2.3.7.8.11.28,HP-ICF-OID::hpicfMauTypeSFPplusDA1,,,,,,Proprietary 1 meter 10Gig DAC SFP+, full-duplex.
.1.3.6.1.4.1.11.2.3.7.8.11.29,HP-ICF-OID::hpicfMauTypeSFPplusDA2,,,,,,Proprietary 2 meter 10Gig DAC SFP+, full-duplex.
.1.3.6.1.4.1.11.2.3.7.8.11.30,HP-ICF-OID::hpicfMauTypeSFPplusDA3,,,,,,Proprietary 3 meter 10Gig DAC SFP+, full-duplex.
.1.3.6.1.4.1.11.2.3.7.8.11.31,HP-ICF-OID::hpicfMauTypeSFPplusDA5,,,,,,Proprietary 5 meter 10Gig DAC SFP+, full-duplex.
.1.3.6.1.4.1.11.2.3.7.8.11.32,HP-ICF-OID::hpicfMauTypeSFPplusDA7,,,,,,Proprietary 7 meter 10Gig DAC SFP+, full-duplex.
.1.3.6.1.4.1.11.2.3.7.8.11.33,HP-ICF-OID::hpicfMauTypeSFPplusDA10,,,,,,Proprietary 10 meter 10Gig DAC SFP+, full-duplex.
.1.3.6.1.4.1.11.2.3.7.8.11.34,HP-ICF-OID::hpicfMauTypeSFPplusDA15,,,,,,Proprietary 15 meter 10Gig DAC SFP+, full-duplex.
.1.3.6.1.4.1.11.2.3.7.8.11.35,HP-ICF-OID::hpicfMauTypeSFPplusDA20,,,,,,Proprietary 20 meter 10Gig DAC SFP+, full-duplex.
.1.3.6.1.4.1.11.2.3.7.8.11.36,HP-ICF-OID::hpicfMauType10GigBaseT,,,,,,Proprietary 10Gig T, full-duplex.
.1.3.6.1.4.1.11.2.3.7.8.11.37,HP-ICF-OID::hpicfMauType10GigBaseTSH,,,,,,Proprietary 10Gig TSH, full-duplex.
.1.3.6.1.4.1.11.2.3.7.8.11.38,HP-ICF-OID::hpicfMauType10GigBaseTLH,,,,,,Proprietary 10Gig TLH, full-duplex.
.1.3.6.1.4.1.11.2.3.7.8.11.39,HP-ICF-OID::hpicfMauType10GigBaseSTK,,,,,,Proprietary 10Gig STK, full-duplex.
.1.3.6.1.4.1.11.2.3.7.8.11.40,HP-ICF-OID::hpicfMauType1000CWDM1470,,,,,,Proprietary 1000CWDM1470 SFP, full-duplex.
.1.3.6.1.4.1.11.2.3.7.8.11.41,HP-ICF-OID::hpicfMauType1000CWDM1490,,,,,,Proprietary 1000CWDM1490 SFP, full-duplex.
.1.3.6.1.4.1.11.2.3.7.8.11.42,HP-ICF-OID::hpicfMauType1000CWDM1510,,,,,,Proprietary 1000CWDM1510 SFP, full-duplex.
.1.3.6.1.4.1.11.2.3.7.8.11.43,HP-ICF-OID::hpicfMauType1000CWDM1530,,,,,,Proprietary 1000CWDM1530 SFP, full-duplex.
.1.3.6.1.4.1.11.2.3.7.8.11.44,HP-ICF-OID::hpicfMauType1000CWDM1550,,,,,,Proprietary 1000CWDM1550 SFP, full-duplex.
.1.3.6.1.4.1.11.2.3.7.8.11.45,HP-ICF-OID::hpicfMauType1000CWDM1570,,,,,,Proprietary 1000CWDM1570 SFP, full-duplex.
.1.3.6.1.4.1.11.2.3.7.8.11.46,HP-ICF-OID::hpicfMauType1000CWDM1590,,,,,,Proprietary 1000CWDM1590 SFP, full-duplex.
.1.3.6.1.4.1.11.2.3.7.8.11.47,HP-ICF-OID::hpicfMauType1000CWDM1610,,,,,,Proprietary 1000CWDM1610 SFP, full-duplex.
.1.3.6.1.4.1.11.2.3.7.8.11.48,HP-ICF-OID::hpicfMauType10GigCWDM1470,,,,,,Proprietary 10Gig CWDM1470 SFP+, full-duplex.
.1.3.6.1.4.1.11.2.3.7.8.11.49,HP-ICF-OID::hpicfMauType10GigCWDM1490,,,,,,Proprietary 10Gig CWDM1490 SFP+, full-duplex.
.1.3.6.1.4.1.11.2.3.7.8.11.50,HP-ICF-OID::hpicfMauType10GigCWDM1510,,,,,,Proprietary 10Gig CWDM1510 SFP+, full-duplex.
.1.3.6.1.4.1.11.2.3.7.8.11.51,HP-ICF-OID::hpicfMauType10GigCWDM1530,,,,,,Proprietary 10Gig CWDM1530 SFP+, full-duplex.
.1.3.6.1.4.1.11.2.3.7.8.11.52,HP-ICF-OID::hpicfMauType10GigCWDM1550,,,,,,Proprietary 10Gig CWDM1550 SFP+, full-duplex.
.1.3.6.1.4.1.11.2.3.7.8.11.53,HP-ICF-OID::hpicfMauType10GigCWDM1570,,,,,,Proprietary 10Gig CWDM1570 SFP+, full-duplex.
.1.3.6.1.4.1.11.2.3.7.8.11.54,HP-ICF-OID::hpicfMauType10GigCWDM1590,,,,,,Proprietary 10Gig CWDM1590 SFP+, full-duplex.
.1.3.6.1.4.1.11.2.3.7.8.11.55,HP-ICF-OID::hpicfMauType10GigCWDM1610,,,,,,Proprietary 10Gig CWDM1610 SFP+, full-duplex.
.1.3.6.1.4.1.11.2.3.7.8.11.56,HP-ICF-OID::hpicfMauType10GigBaseESP,,,,,,Proprietary internal, 10Gig port.
.1.3.6.1.4.1.11.2.3.7.8.11.57,HP-ICF-OID::hpicfMauTypeQSFPpluseSR4,,,,,,Proprietary 40gig QSFP+ eSR4, full-duplex.
.1.3.6.1.4.1.11.2.3.7.8.11.58,HP-ICF-OID::hpicfMauTypeQSFPplusGEN,,,,,,Generic 40gig QSFP+, full-duplex.
.1.3.6.1.4.1.11.2.3.7.8.11.59,HP-ICF-OID::hpicfMauTypeQSFPplusBIDI,,,,,,Proprietary 40gig QSFP+ BIDI, full-duplex.
.1.3.6.1.4.1.11.2.3.7.8.11.60,HP-ICF-OID::hpicfMauType5GigBaseT,,,,,,Proprietary 5GBASE-T, full-duplex.
.1.3.6.1.4.1.11.2.3.7.11,HP-SWITCH-PL-MIB::hpEtherSwitch,,,,,,
.1.3.6.1.4.1.11.2.3.7.11.1,HP-ICF-OID::hpAdvSwitch2000,,,,,,The authoritative identifier for the HP J3100A AdvanceStack Switch 2000.
.1.3.6.1.4.1.11.2.3.7.11.1.1,HP-ICF-OID::hpSwitchPortModuleET4,,,,,,The authoritative identifier for the HP J3102A AdvanceStack Switch Ethernet Port Module.
.1.3.6.1.4.1.11.2.3.7.11.1.2,HP-ICF-OID::hpSwitchPortModuleVG2,,,,,,The authoritative identifier for the HP J3103A AdvanceStack Switch 100VG Port Module.
.1.3.6.1.4.1.11.2.3.7.11.1.3,HP-ICF-OID::hpSwitchPortModule10FL,,,,,,The authoritative identifier for the HP AdvanceStack Switch 10BaseFL Port Module.
.1.3.6.1.4.1.11.2.3.7.11.1.4,HP-ICF-OID::hpSwitchPortModuleFDDI,,,,,,The authoritative identifier for the HP AdvanceStack Switch FDDI Port Module.
.1.3.6.1.4.1.11.2.3.7.11.1.5,HP-ICF-OID::hpSwitchPortModuleTX2,,,,,,The authoritative identifier for the HP AdvanceStack Switch 100BaseT Port Module.
.1.3.6.1.4.1.11.2.3.7.11.1.6,HP-ICF-OID::hpSwitchPortModuleATM,,,,,,The authoritative identifier for the HP AdvanceStack Switch ATM Port Module.
.1.3.6.1.4.1.11.2.3.7.11.2,HP-ICF-OID::hpAdvSwitch2000B,,,,,,The authoritative identifier for the HP J3100B AdvanceStack Switch 2000B.
.1.3.6.1.4.1.11.2.3.7.11.3,HP-ICF-OID::hpAdvSwitch800T,,,,,,The authoritative identifier for the HP J3245A AdvanceStack Switch 800T.
.1.3.6.1.4.1.11.2.3.7.11.4,HP-ICF-OID::hpAdvSwitch200,,,,,,The authoritative identifier for the HP J3175A AdvanceStack Switch 208T and HP J3177A AdvanceStack Switch 224T.
.1.3.6.1.4.1.11.2.3.7.11.4.1,HP-ICF-OID::hpAdvSwitch208T,,,,,,
.1.3.6.1.4.1.11.2.3.7.11.4.2,HP-ICF-OID::hpAdvSwitch208VG,,,,,,
.1.3.6.1.4.1.11.2.3.7.11.4.3,HP-ICF-OID::hpAdvSwitch224T,,,,,,
.1.3.6.1.4.1.11.2.3.7.11.4.4,HP-ICF-OID::hpAdvSwitch224VG,,,,,,
.1.3.6.1.4.1.11.2.3.7.11.5,HP-ICF-OID::hpSwitch212M,,,,,,The authoritative identifier for the J3298A HP 212M Switch.
.1.3.6.1.4.1.11.2.3.7.11.6,HP-ICF-OID::hpSwitch224M,,,,,,The authoritative identifier for the J3299A HP 224M Switch.
.1.3.6.1.4.1.11.2.3.7.11.7,HP-ICF-OID::hpSwitch8000,,,,,,The authoritative identifier for the J4110A HP 8000M Switch.
.1.3.6.1.4.1.11.2.3.7.11.7.1,HP-ICF-OID::hpSwitchPortModule100TX8,,,,,,The authoritative identifier for the HP J4111A 8-port 10/100Base-TX module.
.1.3.6.1.4.1.11.2.3.7.11.7.2,HP-ICF-OID::hpSwitchPortModule100FX4,,,,,,The authoritative identifier for the HP J4112A 4-port 100Base-FX module.
.1.3.6.1.4.1.11.2.3.7.11.7.3,HP-ICF-OID::hpSwitchPortModule10FL4,,,,,,The authoritative identifier for the HP J4118A 4-port 10Base-FL module.
.1.3.6.1.4.1.11.2.3.7.11.7.4,HP-ICF-OID::hpSwitchPortModuleGigSX,,,,,,The authoritative identifier for the HP J4113A 1-port Gigabit SX module.
.1.3.6.1.4.1.11.2.3.7.11.7.5,HP-ICF-OID::hpSwitchPortModuleGigLX,,,,,,The authoritative identifier for the HP J4114A 1-port Gigabit LX module.
.1.3.6.1.4.1.11.2.3.7.11.7.6,HP-ICF-OID::hpSwitchPortModuleTwoGig,,,,,,The authoritative identifier for the HP J4130A 2-port Gigabit module.
.1.3.6.1.4.1.11.2.3.7.11.7.7,HP-ICF-OID::hpSwitchPortModuleGigStk,,,,,,The authoritative identifier for the HP J4130A 1-port Gigabit Stacking module.
.1.3.6.1.4.1.11.2.3.7.11.7.8,HP-ICF-OID::hpSwitchPortModuleGigT,,,,,,The authoritative identifier for the HP J4115A 1-port Gigabit T module.
.1.3.6.1.4.1.11.2.3.7.11.8,HP-ICF-OID::hpSwitch1600,,,,,,The authoritative identifier for the J4120A HP 1600M Switch.
.1.3.6.1.4.1.11.2.3.7.11.9,HP-ICF-OID::hpSwitch4000,,,,,,The authoritative identifier for the J4121A HP 4000M Switch.
.1.3.6.1.4.1.11.2.3.7.11.10,HP-ICF-OID::hpSwitch2400,,,,,,The authoritative identifier for the J4122A HP 2400M Switch.
.1.3.6.1.4.1.11.2.3.7.11.11,HP-ICF-OID::hpSwitch2424,,,,,,The authoritative identifier for the J4122B HP 2424M Switch.
.1.3.6.1.4.1.11.2.3.7.11.12,HP-SN-ROOT-MIB::hpSwitchCore,,,,,,
.1.3.6.1.4.1.11.2.3.7.11.12.1,HP-SN-ROOT-MIB::switch,,,,,,
.1.3.6.1.4.1.11.2.3.7.11.12.1.1,HP-SN-ROOT-MIB::snChassis,,,,,,
.1.3.6.1.4.1.11.2.3.7.11.12.1.1.1,HP-SN-AGENT-MIB::snChasGen,,,,,,
.1.3.6.1.4.1.11.2.3.7.11.12.1.1.1.1,HP-SN-AGENT-MIB::snChasType,OCTET,read-only,,mandatory,,The chassis type represents the type 
.1.3.6.1.4.1.11.2.3.7.11.12.1.1.1.2,HP-SN-AGENT-MIB::snChasSerNum,OCTET,read-only,,mandatory,,The serial number of the chassis. If the
.1.3.6.1.4.1.11.2.3.7.11.12.1.1.1.3,HP-SN-AGENT-MIB::snChasPwrSupplyStatus,INTEGER,read-only,,mandatory,,A bit array that contains the value of the
.1.3.6.1.4.1.11.2.3.7.11.12.1.1.1.4,HP-SN-AGENT-MIB::snChasFanStatus,INTEGER,read-only,,mandatory,,A bit array that contains the value of the 6-31 reserved 5 fan6 status 4 fan5 status 3 fan4 status 2 fan3 status 1 fan2 status
.1.3.6.1.4.1.11.2.3.7.11.12.1.1.1.5,HP-SN-AGENT-MIB::snChasMainBrdDescription,OCTET,read-only,,mandatory,,The main board description string. (It is obsoleted for Chassis Product)
.1.3.6.1.4.1.11.2.3.7.11.12.1.1.1.6,HP-SN-AGENT-MIB::snChasMainPortTotal,INTEGER,read-only,,mandatory,,The total number of ports for the main board. (It is obsoleted for Chassis Product)
.1.3.6.1.4.1.11.2.3.7.11.12.1.1.1.7,HP-SN-AGENT-MIB::snChasExpBrdDescription,OCTET,read-only,,mandatory,,The expansion board description string. Expansion board are those boards attaching on the main board. (It is obsoleted for Chassis Product)
.1.3.6.1.4.1.11.2.3.7.11.12.1.1.1.8,HP-SN-AGENT-MIB::snChasExpPortTotal,INTEGER,read-only,,mandatory,,The total number of ports for the expansion board. (It is obsoleted for Chassis Product)
.1.3.6.1.4.1.11.2.3.7.11.12.1.1.1.9,HP-SN-AGENT-MIB::snChasStatusLeds,INTEGER,read-only,,mandatory,,A bit array that contains the value of the (Port1) (Port4) (Port8) Bit (Bit0) (Bit3) (Bit7) --------
.1.3.6.1.4.1.11.2.3.7.11.12.1.1.1.10,HP-SN-AGENT-MIB::snChasTrafficLeds,INTEGER,read-only,,mandatory,,A bit array that contains the value of the (Port1) (Port4) (Port8) Bit (Bit0) (Bit3) (Bit7) --------
.1.3.6.1.4.1.11.2.3.7.11.12.1.1.1.11,HP-SN-AGENT-MIB::snChasMediaLeds,INTEGER,read-only,,mandatory,,A bit array that contains the value of the 0 half duplex 1 full duplex Bit (Bit0) (Bit3) (Bit7) ---------
.1.3.6.1.4.1.11.2.3.7.11.12.1.1.1.12,HP-SN-AGENT-MIB::snChasEnablePwrSupplyTrap,INTEGER,read-write,,mandatory,disabled(0):enabled(1),Indicates whether the SNMP agent process is
.1.3.6.1.4.1.11.2.3.7.11.12.1.1.1.13,HP-SN-AGENT-MIB::snChasMainBrdId,OCTET,read-only,,mandatory,,The main board identifier, which can uniquely identify a board type. It is an encoded octet string with the following meaning: octet 0 - octet string format version, which identifies the format of this string. If format version octet has the value 1, the octets after the version octet have the following meaning: octet 1 - product type, FIWG=0x57, FIBB=0x42, FIMLS=0x4D NI=0x4E, TI=0x54, TIRT=0x52 octet 2 - board type, POWERPC=1, ALPHA=2 If format version octet has the value 2, the octets after the version octet have the following meaning: octet 1 - product type:  octet 2 - module type: Both format version 1 and 2: octet 3 - processor type, PVR_M603=3, PVR_M604=4, PVR_M603E=6, PVR_M603EV=7, PVR_M604E=9 octet 4 to octet 5 - processor speed in MHz octet 6 - MAC type: MAC_NONE=0, MAC_SEEQ_10_100=1, MAC_DEC_10_100=2, MAC_SEEQ_1000=5, MAC_VLSI_1000=7 octet 7 - PHY type, PHY_NONE=0, PHY_QSI=1, PHY_BROADCOM=2, PHY_ICS=3, PHY_NATIONAL=4, PHY_LEVEL1=6, PHY_LEVEL16=7, PHY_LEVEL24=8 octet 8 - port type, COPPER=0, FIBER=1 octet 9 - fiber port type, NONFIBER=0, SX_FIBER=1, LX_FIBER=2, LHX_FIBER=3, LX_SX_FIBER=4, LHB_FIBER=5 octet 10 to octet 13 - DRAM size in KBytes octet 14 to octet 17 - boot flash size in KBytes octet 18 to octet 21 - code flash size in KBytes octet 22 to octet 27 - serial number. octet 28 - chassis backplane type. 
.1.3.6.1.4.1.11.2.3.7.11.12.1.1.1.14,HP-SN-AGENT-MIB::snChasExpBrdId,OCTET,read-only,,mandatory,,The expansion board identifier. Expansion board are those boards attaching on the main board. It is an encoded octet octet 0 - octet string format version, which identifies the format of this string. If format version octet has the value 1, the octets after the version octet have the following meaning: octet 1 - expansion board type, HUNDRED_MEG_1PORT=1, HUNDRED_MEG_2PORT=2, HUNDRED_MEG_1PORT_COPPER=3, HUNDRED_MEG_2PORT_COPPER=4, HUNDRED_MEG_2PORT_LX=5, GIGA_1PORT=8, GIGA_2PORT=9 octet 2 - fiber port type, NONFIBER=0, SX_FIBER=1, LX_FIBER=2, LHX_FIBER=3, LX_SX_FIBER=4 (It is obsoleted for Chassis Product)
.1.3.6.1.4.1.11.2.3.7.11.12.1.1.1.15,HP-SN-AGENT-MIB::snChasSpeedLeds,INTEGER,read-only,,mandatory,,A bit array that contains the value of the 0 10 MBit 1 100 MBit Bit (Bit0) (Bit3) (Bit7) ---------
.1.3.6.1.4.1.11.2.3.7.11.12.1.1.1.16,HP-SN-AGENT-MIB::snChasEnableFanTrap,INTEGER,read-write,,mandatory,disabled(0):enabled(1),Indicates whether the SNMP agent process is
.1.3.6.1.4.1.11.2.3.7.11.12.1.1.1.17,HP-SN-AGENT-MIB::snChasIdNumber,OCTET,read-write,,mandatory,,An administratively-assigned chassis identity number, used by inventory control.
.1.3.6.1.4.1.11.2.3.7.11.12.1.1.1.18,HP-SN-AGENT-MIB::snChasActualTemperature,INTEGER,read-only,,mandatory,,Temperature of the chassis. Each unit is 0.5 degrees Celcius.
.1.3.6.1.4.1.11.2.3.7.11.12.1.1.1.19,HP-SN-AGENT-MIB::snChasWarningTemperature,INTEGER,read-write,,mandatory,,Actual temperature higher than this threshold value will trigger
.1.3.6.1.4.1.11.2.3.7.11.12.1.1.1.20,HP-SN-AGENT-MIB::snChasShutdownTemperature,INTEGER,read-write,,mandatory,,Actual temperature higher than this threshold value will shutdown
.1.3.6.1.4.1.11.2.3.7.11.12.1.1.1.21,HP-SN-AGENT-MIB::snChasEnableTempWarnTrap,INTEGER,read-write,,mandatory,disabled(0):enabled(1),Indicates whether the SNMP agent process is
.1.3.6.1.4.1.11.2.3.7.11.12.1.1.1.22,HP-SN-AGENT-MIB::snChasFlashCard,INTEGER,read-only,,mandatory,,A bit array that contains the value of the 2-31 reserved 1 flash card 2 status
.1.3.6.1.4.1.11.2.3.7.11.12.1.1.1.23,HP-SN-AGENT-MIB::snChasFlashCardLeds,INTEGER,read-only,,mandatory,,A bit array that contains the value of the
.1.3.6.1.4.1.11.2.3.7.11.12.1.1.1.24,HP-SN-AGENT-MIB::snChasNumSlots,INTEGER,read-only,,mandatory,,Number of slots of the chassis.
.1.3.6.1.4.1.11.2.3.7.11.12.1.1.1.25,HP-SN-AGENT-MIB::snChasArchitectureType,INTEGER,read-only,,mandatory,,Architecture type.
.1.3.6.1.4.1.11.2.3.7.11.12.1.1.1.26,HP-SN-AGENT-MIB::snChasProductType,INTEGER,read-only,,mandatory,,Product type.
.1.3.6.1.4.1.11.2.3.7.11.12.1.1.2,HP-SN-AGENT-MIB::snChasPwr,,,,,,
.1.3.6.1.4.1.11.2.3.7.11.12.1.1.2.1,HP-SN-AGENT-MIB::snChasPwrSupplyTable,,not-accessible,,mandatory,,A table of each power supply information. Only installed
.1.3.6.1.4.1.11.2.3.7.11.12.1.1.2.1.1,HP-SN-AGENT-MIB::snChasPwrSupplyEntry,,not-accessible,snChasPwrSupplyIndex,mandatory,,A row in the power supply table.
.1.3.6.1.4.1.11.2.3.7.11.12.1.1.2.1.1.1,HP-SN-AGENT-MIB::snChasPwrSupplyIndex,INTEGER,read-only,,mandatory,,The index to power supply table.
.1.3.6.1.4.1.11.2.3.7.11.12.1.1.2.1.1.2,HP-SN-AGENT-MIB::snChasPwrSupplyDescription,OCTET,read-only,,mandatory,,The power supply description string.
.1.3.6.1.4.1.11.2.3.7.11.12.1.1.2.1.1.3,HP-SN-AGENT-MIB::snChasPwrSupplyOperStatus,INTEGER,read-only,,mandatory,other(1):normal(2):failure(3),The power supply operation status.
.1.3.6.1.4.1.11.2.3.7.11.12.1.1.3,HP-SN-AGENT-MIB::snChasFan,,,,,,
.1.3.6.1.4.1.11.2.3.7.11.12.1.1.3.1,HP-SN-AGENT-MIB::snChasFanTable,,not-accessible,,mandatory,,A table of each fan information. Only installed
.1.3.6.1.4.1.11.2.3.7.11.12.1.1.3.1.1,HP-SN-AGENT-MIB::snChasFanEntry,,not-accessible,snChasFanIndex,mandatory,,A row in the fan table.
.1.3.6.1.4.1.11.2.3.7.11.12.1.1.3.1.1.1,HP-SN-AGENT-MIB::snChasFanIndex,INTEGER,read-only,,mandatory,,The index to fan table.
.1.3.6.1.4.1.11.2.3.7.11.12.1.1.3.1.1.2,HP-SN-AGENT-MIB::snChasFanDescription,OCTET,read-only,,mandatory,,The fan description string.
.1.3.6.1.4.1.11.2.3.7.11.12.1.1.3.1.1.3,HP-SN-AGENT-MIB::snChasFanOperStatus,INTEGER,read-only,,mandatory,other(1):normal(2):failure(3),The fan operation status.
.1.3.6.1.4.1.11.2.3.7.11.12.1.2,HP-SN-ROOT-MIB::snAgentSys,,,,,,
.1.3.6.1.4.1.11.2.3.7.11.12.1.2.1,HP-SN-AGENT-MIB::snAgentGbl,,,,,,
.1.3.6.1.4.1.11.2.3.7.11.12.1.2.1.1,HP-SN-AGENT-MIB::snAgReload,INTEGER,read-write,,mandatory,other(1):running(2):reset(3):busy(4),Action object to reboot the agent.
.1.3.6.1.4.1.11.2.3.7.11.12.1.2.1.2,HP-SN-AGENT-MIB::snAgEraseNVRAM,INTEGER,read-write,,mandatory,normal(1):error(2):erase(3):erasing(4):busy(5),Action object to erase NVRAM of the agent.
.1.3.6.1.4.1.11.2.3.7.11.12.1.2.1.3,HP-SN-AGENT-MIB::snAgWriteNVRAM,INTEGER,read-write,,mandatory,normal(1):error(2):write(3):writing(4):busy(5),Action object to save all configuration info to
.1.3.6.1.4.1.11.2.3.7.11.12.1.2.1.4,HP-SN-AGENT-MIB::snAgConfigFromNVRAM,INTEGER,not-accessible,,mandatory,normal(1):error(2):config(3):configing(4):busy(5),Action object to config the switch from NVRAM of the agent.
.1.3.6.1.4.1.11.2.3.7.11.12.1.2.1.5,HP-SN-AGENT-MIB::snAgTftpServerIp,IpAddress,read-write,,mandatory,,The tftp server address, this will be used for both download/upload
.1.3.6.1.4.1.11.2.3.7.11.12.1.2.1.6,HP-SN-AGENT-MIB::snAgImgFname,OCTET,read-write,,mandatory,,Name of the image file including path currently associated
.1.3.6.1.4.1.11.2.3.7.11.12.1.2.1.7,HP-SN-AGENT-MIB::snAgImgLoad,INTEGER,read-write,,mandatory,normal(1):flashPrepareReadFailure(2):flashReadError(3):flashPrepareWriteFailure(4):flashWriteError(5):tftpTimeoutError(6):tftpOutOfBufferSpace(7):tftpBusy(8):tftpRemoteOtherErrors(9):tftpRemoteNoFile(10):tftpRemoteBadAccess(11):tftpRemoteDiskFull(12):tftpRemoteBadOperation(13):tftpRemoteBadId(14):tftpRemoteFileExists(15):tftpRemoteNoUser(16):operationError(17):loading(18):uploadMPPrimary(19):downloadMPPrimary(20):uploadMPSecondary(21):downloadMPSecondary(22):tftpWrongFileType(23):downloadSPPrimary(24):downloadSPSecondary(25),Action object to down/up load a new image
.1.3.6.1.4.1.11.2.3.7.11.12.1.2.1.8,HP-SN-AGENT-MIB::snAgCfgFname,OCTET,read-write,,mandatory,,Name of the config file(s) including path currently associated
.1.3.6.1.4.1.11.2.3.7.11.12.1.2.1.9,HP-SN-AGENT-MIB::snAgCfgLoad,INTEGER,read-write,,mandatory,normal(1):flashPrepareReadFailure(2):flashReadError(3):flashPrepareWriteFailure(4):flashWriteError(5):tftpTimeoutError(6):tftpOutOfBufferSpace(7):tftpBusy(8):tftpRemoteOtherErrors(9):tftpRemoteNoFile(10):tftpRemoteBadAccess(11):tftpRemoteDiskFull(12):tftpRemoteBadOperation(13):tftpRemoteBadId(14):tftpRemoteFileExists(15):tftpRemoteNoUser(16):operationError(17):loading(18):uploadFromFlashToServer(20):downloadToFlashFromServer(21):uploadFromDramToServer(22):downloadToDramFromServer(23):uploadFromFlashToNMS(24):downloadToFlashFromNMS(25):uploadFromDramToNMS(26):downloadToDramFromNMS(27):operationDoneWithNMS(28):tftpWrongFileType(29):downloadToDramFromServerOverwrite(30),Action object to down/up load a config image to tftp server.  from tftp server. to tftp server. from tftp server. from tftp server, clear the running-config, and overwrite with the new config.
.1.3.6.1.4.1.11.2.3.7.11.12.1.2.1.10,HP-SN-AGENT-MIB::snAgDefGwayIp,IpAddress,read-write,,mandatory,,The default gateway (router) address.
.1.3.6.1.4.1.11.2.3.7.11.12.1.2.1.11,HP-SN-AGENT-MIB::snAgImgVer,OCTET,read-only,,mandatory,,The version of the running software in the form
.1.3.6.1.4.1.11.2.3.7.11.12.1.2.1.12,HP-SN-AGENT-MIB::snAgFlashImgVer,OCTET,read-only,,mandatory,,The version of the software image saved in local
.1.3.6.1.4.1.11.2.3.7.11.12.1.2.1.13,HP-SN-AGENT-MIB::snAgGblIfIpAddr,IpAddress,read-write,,mandatory,,The interface ip address.
.1.3.6.1.4.1.11.2.3.7.11.12.1.2.1.14,HP-SN-AGENT-MIB::snAgGblIfIpMask,IpAddress,read-write,,mandatory,,The interface ip address mask.
.1.3.6.1.4.1.11.2.3.7.11.12.1.2.1.15,HP-SN-AGENT-MIB::snAgGblPassword,OCTET,read-write,,mandatory,,System Security Access Password and this is only 
.1.3.6.1.4.1.11.2.3.7.11.12.1.2.1.16,HP-SN-AGENT-MIB::snAgTrpRcvrCurEntry,INTEGER,read-only,,mandatory,,The current total entries of the Trap 
.1.3.6.1.4.1.11.2.3.7.11.12.1.2.1.19,HP-SN-AGENT-MIB::snAgGblDataRetrieveMode,INTEGER,read-write,,mandatory,nextbootCfg(0):operationalData(1),By default, this mode is set to nextbootCfg(0).
.1.3.6.1.4.1.11.2.3.7.11.12.1.2.1.20,HP-SN-AGENT-MIB::snAgSystemLog,OCTET,read-write,,mandatory,,The system log object to indicate whether any Network
.1.3.6.1.4.1.11.2.3.7.11.12.1.2.1.21,HP-SN-AGENT-MIB::snAgGblEnableColdStartTrap,INTEGER,read-write,,mandatory,disabled(0):enabled(1),Indicates whether the SNMP agent process is
.1.3.6.1.4.1.11.2.3.7.11.12.1.2.1.22,HP-SN-AGENT-MIB::snAgGblEnableLinkUpTrap,INTEGER,read-write,,mandatory,disabled(0):enabled(1),Indicates whether the SNMP agent process is
.1.3.6.1.4.1.11.2.3.7.11.12.1.2.1.23,HP-SN-AGENT-MIB::snAgGblEnableLinkDownTrap,INTEGER,read-write,,mandatory,disabled(0):enabled(1),Indicates whether the SNMP agent process is
.1.3.6.1.4.1.11.2.3.7.11.12.1.2.1.24,HP-SN-AGENT-MIB::snAgGblPasswordChangeMode,INTEGER,read-only,,mandatory,anyMgmtEntity(1):consoleAndTelnet(2):consoleOnly(3):telnetOnly(4),Specify which management entity is allowed to change
.1.3.6.1.4.1.11.2.3.7.11.12.1.2.1.25,HP-SN-AGENT-MIB::snAgGblReadOnlyCommunity,OCTET,read-write,,mandatory,,SNMP read community string and this is only allowed
.1.3.6.1.4.1.11.2.3.7.11.12.1.2.1.26,HP-SN-AGENT-MIB::snAgGblReadWriteCommunity,OCTET,read-write,,mandatory,,SNMP read-write community string and this is only
.1.3.6.1.4.1.11.2.3.7.11.12.1.2.1.27,HP-SN-AGENT-MIB::snAgGblCurrentSecurityLevel,INTEGER,read-only,,mandatory,,This represnts the current log-in security level.
.1.3.6.1.4.1.11.2.3.7.11.12.1.2.1.28,HP-SN-AGENT-MIB::snAgGblSecurityLevelSet,INTEGER,read-write,,mandatory,,This shows which the security level password to be set.
.1.3.6.1.4.1.11.2.3.7.11.12.1.2.1.29,HP-SN-AGENT-MIB::snAgGblLevelPasswordsMask,INTEGER,read-only,,mandatory,,This shows the bitmap of level passwords which successfully assigned to the system.
.1.3.6.1.4.1.11.2.3.7.11.12.1.2.1.30,HP-SN-AGENT-MIB::snAgGblQueueOverflow,INTEGER,read-only,,mandatory,false(0):true(1),false - The device queues are not overflow.
.1.3.6.1.4.1.11.2.3.7.11.12.1.2.1.31,HP-SN-AGENT-MIB::snAgGblBufferShortage,INTEGER,read-only,,mandatory,false(0):true(1),false - The device buffers are adequate.
.1.3.6.1.4.1.11.2.3.7.11.12.1.2.1.32,HP-SN-AGENT-MIB::snAgGblDmaFailure,INTEGER,read-only,,mandatory,false(0):true(1),false - The device DMAs are in good condition.
.1.3.6.1.4.1.11.2.3.7.11.12.1.2.1.33,HP-SN-AGENT-MIB::snAgGblResourceLowWarning,INTEGER,read-only,,mandatory,false(0):true(1),false - No, the device does not have resource-low-warning.
.1.3.6.1.4.1.11.2.3.7.11.12.1.2.1.34,HP-SN-AGENT-MIB::snAgGblExcessiveErrorWarning,INTEGER,read-only,,mandatory,false(0):true(1),false - No, the device does not have any excessive collision, FCS errors, alignment warning etc.
.1.3.6.1.4.1.11.2.3.7.11.12.1.2.1.35,HP-SN-AGENT-MIB::snAgGblCpuUtilData,Gauge32,read-only,,mandatory,,The statistics collection of utilization of the CPU in the device. Reading this object resets all the counters. Therefore, a user need not set snAgGblUtilCollect.
.1.3.6.1.4.1.11.2.3.7.11.12.1.2.1.36,HP-SN-AGENT-MIB::snAgGblCpuUtilCollect,INTEGER,read-write,,deprecated,disabled(0):enabled(1),enable(1) - The beginning of statistics collection of utilization of the CPU in the device. This object is deprecated. User need not set this object. User can read snAgGblCpuUtilData to reset all the counters. 
.1.3.6.1.4.1.11.2.3.7.11.12.1.2.1.37,HP-SN-AGENT-MIB::snAgGblTelnetTimeout,INTEGER,read-write,,mandatory,,Telnet session idling timeout value. Writing value 0 to
.1.3.6.1.4.1.11.2.3.7.11.12.1.2.1.38,HP-SN-AGENT-MIB::snAgGblEnableWebMgmt,INTEGER,read-write,,mandatory,disabled(0):enabled(1),Enable/disable web management.
.1.3.6.1.4.1.11.2.3.7.11.12.1.2.1.39,HP-SN-AGENT-MIB::snAgGblSecurityLevelBinding,INTEGER,read-only,,mandatory,,This represnts the binding of a given password to which
.1.3.6.1.4.1.11.2.3.7.11.12.1.2.1.40,HP-SN-AGENT-MIB::snAgGblEnableSLB,INTEGER,read-only,,mandatory,disabled(0):enabled(1),Enable/disable Server Load Balancing.
.1.3.6.1.4.1.11.2.3.7.11.12.1.2.1.41,HP-SN-AGENT-MIB::snAgSoftwareFeature,OCTET,read-only,,mandatory,,A bit string representing the software feature of the running
.1.3.6.1.4.1.11.2.3.7.11.12.1.2.1.42,HP-SN-AGENT-MIB::snAgGblEnableModuleInsertedTrap,INTEGER,read-write,,mandatory,disabled(0):enabled(1),Indicates whether the SNMP agent process is permitted to
.1.3.6.1.4.1.11.2.3.7.11.12.1.2.1.43,HP-SN-AGENT-MIB::snAgGblEnableModuleRemovedTrap,INTEGER,read-write,,mandatory,disabled(0):enabled(1),Indicates whether the SNMP agent process is permitted to
.1.3.6.1.4.1.11.2.3.7.11.12.1.2.1.44,HP-SN-AGENT-MIB::snAgGblTrapMessage,OCTET,read-only,,mandatory,,A generic trap message string.
.1.3.6.1.4.1.11.2.3.7.11.12.1.2.1.45,HP-SN-AGENT-MIB::snAgGblEnableTelnetServer,INTEGER,read-write,,mandatory,disabled(0):enabled(1),Enable or disable telnet server in device.
.1.3.6.1.4.1.11.2.3.7.11.12.1.2.1.46,HP-SN-AGENT-MIB::snAgGblTelnetPassword,OCTET,read-write,,mandatory,,Telnet Access Password and this is only 
.1.3.6.1.4.1.11.2.3.7.11.12.1.2.1.47,HP-SN-AGENT-MIB::snAgBuildDate,OCTET,read-only,,mandatory,,The date of the built software.
.1.3.6.1.4.1.11.2.3.7.11.12.1.2.1.48,HP-SN-AGENT-MIB::snAgBuildtime,OCTET,read-only,,mandatory,,The time of the built software.
.1.3.6.1.4.1.11.2.3.7.11.12.1.2.1.49,HP-SN-AGENT-MIB::snAgBuildVer,OCTET,read-only,,mandatory,,The version of the built software in the form
.1.3.6.1.4.1.11.2.3.7.11.12.1.2.1.50,HP-SN-AGENT-MIB::snAgGblCpuUtil1SecAvg,Gauge32,read-only,,mandatory,,The statistics collection of 1 second CPU utilization.
.1.3.6.1.4.1.11.2.3.7.11.12.1.2.1.51,HP-SN-AGENT-MIB::snAgGblCpuUtil5SecAvg,Gauge32,read-only,,mandatory,,The statistics collection of 5 second CPU utilization.
.1.3.6.1.4.1.11.2.3.7.11.12.1.2.1.52,HP-SN-AGENT-MIB::snAgGblCpuUtil1MinAvg,Gauge32,read-only,,mandatory,,The statistics collection of 1 minute CPU utilization.
.1.3.6.1.4.1.11.2.3.7.11.12.1.2.1.53,HP-SN-AGENT-MIB::snAgGblDynMemUtil,Gauge32,read-only,,mandatory,,The system dynamic memory utilization, in unit of percentage.
.1.3.6.1.4.1.11.2.3.7.11.12.1.2.1.54,HP-SN-AGENT-MIB::snAgGblDynMemTotal,INTEGER,read-only,,mandatory,,The total amount of system dynamic memory, in number of bytes.
.1.3.6.1.4.1.11.2.3.7.11.12.1.2.1.55,HP-SN-AGENT-MIB::snAgGblDynMemFree,INTEGER,read-only,,mandatory,,The free amount of system dynamic memory, in number of bytes.
.1.3.6.1.4.1.11.2.3.7.11.12.1.2.1.56,HP-SN-AGENT-MIB::snAgImgLoadSPModuleType,INTEGER,read-write,,mandatory,other(1):vm1(2):pos12(3):pos48(4):atm(5):gignpa(6),The switch processor module type of which that receives
.1.3.6.1.4.1.11.2.3.7.11.12.1.2.1.57,HP-SN-AGENT-MIB::snAgImgLoadSPModuleNumber,INTEGER,read-write,,mandatory,,The slot numner of a switch processor module that receives
.1.3.6.1.4.1.11.2.3.7.11.12.1.2.1.58,HP-SN-AGENT-MIB::snAgTrapHoldTime,INTEGER,read-write,,mandatory,,The time in seconds for which traps will be witheld
.1.3.6.1.4.1.11.2.3.7.11.12.1.2.1.59,HP-SN-AGENT-MIB::snAgSFlowSourceInterface,Integer32,read-write,,mandatory,,Use the ifIndex value here to specify the
.1.3.6.1.4.1.11.2.3.7.11.12.1.2.1.60,HP-SN-AGENT-MIB::snAgGblTelnetLoginTimeout,INTEGER,read-write,,mandatory,,Telnet session login timeout value in minutes. Default is 1 minute.
.1.3.6.1.4.1.11.2.3.7.11.12.1.2.1.61,HP-SN-AGENT-MIB::snAgGblBannerExec,OCTET,read-write,,mandatory,,EXEC process creation banner. Insert newlines using '\n' within the string.
.1.3.6.1.4.1.11.2.3.7.11.12.1.2.1.62,HP-SN-AGENT-MIB::snAgGblBannerIncoming,OCTET,read-write,,mandatory,,Incoming terminal line banner. Insert newlines using '\n' within the string.
.1.3.6.1.4.1.11.2.3.7.11.12.1.2.1.63,HP-SN-AGENT-MIB::snAgGblBannerMotd,OCTET,read-write,,mandatory,,Message-of-the-day banner. Insert newlines using '\n' within the string.
.1.3.6.1.4.1.11.2.3.7.11.12.1.2.2,HP-SN-AGENT-MIB::snAgentBrd,,,,,,
.1.3.6.1.4.1.11.2.3.7.11.12.1.2.2.1,HP-SN-AGENT-MIB::snAgentBrdTable,,not-accessible,,mandatory,,A table of each physical board information.
.1.3.6.1.4.1.11.2.3.7.11.12.1.2.2.1.1,HP-SN-AGENT-MIB::snAgentBrdEntry,,not-accessible,snAgentBrdIndex,mandatory,,A row in the Agent Board table.
.1.3.6.1.4.1.11.2.3.7.11.12.1.2.2.1.1.1,HP-SN-AGENT-MIB::snAgentBrdIndex,INTEGER,read-only,,mandatory,,The index to the Agent Interface Table.
.1.3.6.1.4.1.11.2.3.7.11.12.1.2.2.1.1.2,HP-SN-AGENT-MIB::snAgentBrdMainBrdDescription,OCTET,read-only,,mandatory,,The main board description string.
.1.3.6.1.4.1.11.2.3.7.11.12.1.2.2.1.1.3,HP-SN-AGENT-MIB::snAgentBrdMainBrdId,OCTET,read-only,,mandatory,,The main board identifier, which can uniquely identify a board type. It is an encoded octet string with the following meaning: octet 0 - octet string format version, which identifies the format of this string. If format version octet has the value 2, the octets after the version octet have the following meaning: octet 1 - product type:  octet 2 - module type: octet 3 - processor type, PVR_M603=3, PVR_M604=4, PVR_M603E=6, PVR_M603EV=7, PVR_M750=8, PVR_M604E=9 octet 4 to octet 5 - processor speed in MHz octet 6 - MAC type: MAC_NONE=0 MAC_SEEQ_10_100=1,  MAC_DEC_10_100=2, MAC_3COM_10_100=3, MAC_SEEQ_1000=5,  octet 7 - PHY type, PHY_NONE=0, PHY_QSI=1, PHY_BROADCOM=2, PHY_ICS=3, PHY_NATIONAL=4, PHY_LEVEL1=6, PHY_BROADCOM_10_100=7, PHY_LEVEL24=8, PHY_BROADCOM_10000=9 octet 8 - port type, COPPER=0, FIBER=1 octet 9 - fiber port type, NONFIBER=0, SX_FIBER=1, LX_FIBER=2, LHX_FIBER=3 octet 10 to octet 13 - DRAM size in KBytes octet 14 to octet 17 - boot flash size in KBytes octet 18 to octet 21 - code flash size in KBytes octet 22 to octet 27 - serial number. octet 28 - chassis backplane type. 
.1.3.6.1.4.1.11.2.3.7.11.12.1.2.2.1.1.4,HP-SN-AGENT-MIB::snAgentBrdMainPortTotal,INTEGER,read-only,,mandatory,,The total number of ports for the main board.
.1.3.6.1.4.1.11.2.3.7.11.12.1.2.2.1.1.5,HP-SN-AGENT-MIB::snAgentBrdExpBrdDescription,OCTET,read-only,,mandatory,,The expansion board description string. Expansion board are those boards attaching on the main board.
.1.3.6.1.4.1.11.2.3.7.11.12.1.2.2.1.1.6,HP-SN-AGENT-MIB::snAgentBrdExpBrdId,OCTET,read-only,,mandatory,,The expansion board identifier. Expansion board are those boards attaching on the main board. It is an encoded octet octet 0 - octet string format version, which identifies the format of this string. If format version octet has the value 1, the octets after the version octet have the following meaning: octet 1 - expansion board type, HUNDRED_MEG_1PORT=1, HUNDRED_MEG_2PORT=2, HUNDRED_MEG_1PORT_COPPER=3, HUNDRED_MEG_2PORT_COPPER=4, HUNDRED_MEG_2PORT_LX=5, GIGA_1PORT=8, GIGA_2PORT=9 octet 2 - fiber port type, NONFIBER=0, SX_FIBER=1, LX_FIBER=2, LHX_FIBER=3, LX_SX_FIBER=4, LHB_FIBER=5
.1.3.6.1.4.1.11.2.3.7.11.12.1.2.2.1.1.7,HP-SN-AGENT-MIB::snAgentBrdExpPortTotal,INTEGER,read-only,,mandatory,,The total number of ports for the expansion board.
.1.3.6.1.4.1.11.2.3.7.11.12.1.2.2.1.1.8,HP-SN-AGENT-MIB::snAgentBrdStatusLeds,INTEGER,read-only,,deprecated,,A bit array that contains the value of the (Port1) (Port4) (Port8) Bit (Bit0) (Bit3) (Bit7)
.1.3.6.1.4.1.11.2.3.7.11.12.1.2.2.1.1.9,HP-SN-AGENT-MIB::snAgentBrdTrafficLeds,INTEGER,read-only,,deprecated,,A bit array that contains the value of the (Port1) (Port4) (Port8) Bit (Bit0) (Bit3) (Bit7)
.1.3.6.1.4.1.11.2.3.7.11.12.1.2.2.1.1.10,HP-SN-AGENT-MIB::snAgentBrdMediaLeds,INTEGER,read-only,,deprecated,,A bit array that contains the value of the 0 half duplex 1 full duplex Bit (Bit0) (Bit3) (Bit7)
.1.3.6.1.4.1.11.2.3.7.11.12.1.2.2.1.1.11,HP-SN-AGENT-MIB::snAgentBrdSpeedLeds,INTEGER,read-only,,deprecated,,A bit array that contains the value of the 0 10 MBit 1 100 MBit Bit (Bit0) (Bit3) (Bit7)
.1.3.6.1.4.1.11.2.3.7.11.12.1.2.2.1.1.12,HP-SN-AGENT-MIB::snAgentBrdModuleStatus,INTEGER,read-only,,mandatory,moduleEmpty(0):moduleGoingDown(2):moduleRejected(3):moduleBad(4):moduleComingUp(9):moduleRunning(10),By default, this mode is set to notActivated(0).
.1.3.6.1.4.1.11.2.3.7.11.12.1.2.2.1.1.13,HP-SN-AGENT-MIB::snAgentBrdRedundantStatus,INTEGER,read-only,,mandatory,other(1):active(2):standby(3):crashed(4):comingUp(5),The redundant status of a module. Non-management module always
.1.3.6.1.4.1.11.2.3.7.11.12.1.2.2.1.1.14,HP-SN-AGENT-MIB::snAgentBrdAlarmLeds,INTEGER,read-only,,deprecated,,A bit array that contains the value of the 0 no alarm 1 alarm Bit (Bit0) (Bit3) (Bit7)
.1.3.6.1.4.1.11.2.3.7.11.12.1.2.2.1.1.15,HP-SN-AGENT-MIB::snAgentBrdTxTrafficLeds,INTEGER,read-only,,deprecated,,A bit array that contains the value of the (Port1) (Port4) (Port8) Bit (Bit0) (Bit3) (Bit7)
.1.3.6.1.4.1.11.2.3.7.11.12.1.2.2.1.1.16,HP-SN-AGENT-MIB::snAgentBrdRxTrafficLeds,INTEGER,read-only,,deprecated,,A bit array that contains the value of the (Port1) (Port4) (Port8) Bit (Bit0) (Bit3) (Bit7)
.1.3.6.1.4.1.11.2.3.7.11.12.1.2.2.1.1.17,HP-SN-AGENT-MIB::snAgentBrdStatusLedString,OCTET,read-only,,mandatory,,A bit array that contains the value of the (Port1) (Port4) (Port8) Bit (Bit0) (Bit3) (Bit7) --------
.1.3.6.1.4.1.11.2.3.7.11.12.1.2.2.1.1.18,HP-SN-AGENT-MIB::snAgentBrdTrafficLedString,OCTET,read-only,,mandatory,,A bit array that contains the value of the (Port1) (Port4) (Port8) Bit (Bit0) (Bit3) (Bit7) --------
.1.3.6.1.4.1.11.2.3.7.11.12.1.2.2.1.1.19,HP-SN-AGENT-MIB::snAgentBrdMediaLedString,OCTET,read-only,,mandatory,,A bit array that contains the value of the 0 half duplex 1 full duplex Bit (Bit0) (Bit3) (Bit7) ---------
.1.3.6.1.4.1.11.2.3.7.11.12.1.2.2.1.1.20,HP-SN-AGENT-MIB::snAgentBrdSpeedLedString,OCTET,read-only,,mandatory,,A bit array that contains the value of the 0 10 MBit 1 100 MBit Bit (Bit0) (Bit3) (Bit7) ---------
.1.3.6.1.4.1.11.2.3.7.11.12.1.2.2.1.1.21,HP-SN-AGENT-MIB::snAgentBrdAlarmLedString,OCTET,read-only,,mandatory,,A bit array that contains the value of the 0 no alarm 1 alarm Bit (Bit0) (Bit3) (Bit7) ---------
.1.3.6.1.4.1.11.2.3.7.11.12.1.2.2.1.1.22,HP-SN-AGENT-MIB::snAgentBrdTxTrafficLedString,OCTET,read-only,,mandatory,,A bit array that contains the value of the (Port1) (Port4) (Port8) Bit (Bit0) (Bit3) (Bit7) --------
.1.3.6.1.4.1.11.2.3.7.11.12.1.2.2.1.1.23,HP-SN-AGENT-MIB::snAgentBrdRxTrafficLedString,OCTET,read-only,,mandatory,,A bit array that contains the value of the (Port1) (Port4) (Port8) Bit (Bit0) (Bit3) (Bit7) --------
.1.3.6.1.4.1.11.2.3.7.11.12.1.2.3,HP-SN-AGENT-MIB::snAgentTrp,,,,,,
.1.3.6.1.4.1.11.2.3.7.11.12.1.2.3.1,HP-SN-AGENT-MIB::snAgTrpRcvrTable,,not-accessible,,mandatory,,A table of managers which to send traps.
.1.3.6.1.4.1.11.2.3.7.11.12.1.2.3.1.1,HP-SN-AGENT-MIB::snAgTrpRcvrEntry,,not-accessible,snAgTrpRcvrIndex,mandatory,,A row in the trap receiver table.
.1.3.6.1.4.1.11.2.3.7.11.12.1.2.3.1.1.1,HP-SN-AGENT-MIB::snAgTrpRcvrIndex,INTEGER,read-only,,mandatory,,The index to the Trap Receiver Table.
.1.3.6.1.4.1.11.2.3.7.11.12.1.2.3.1.1.2,HP-SN-AGENT-MIB::snAgTrpRcvrIpAddr,IpAddress,read-write,,mandatory,,The ip address for
.1.3.6.1.4.1.11.2.3.7.11.12.1.2.3.1.1.3,HP-SN-AGENT-MIB::snAgTrpRcvrComm,OCTET,read-write,,mandatory,,Community string to use.
.1.3.6.1.4.1.11.2.3.7.11.12.1.2.3.1.1.4,HP-SN-AGENT-MIB::snAgTrpRcvrStatus,INTEGER,read-write,,mandatory,other(1):valid(2):delete(3):create(4):ignore(5),This object is used to create and
.1.3.6.1.4.1.11.2.3.7.11.12.1.2.3.1.1.5,HP-SN-AGENT-MIB::snAgTrpRcvrUDPPort,INTEGER,read-write,,mandatory,,UDP port number of the trap receiver.
.1.3.6.1.4.1.11.2.3.7.11.12.1.2.4,HP-SN-AGENT-MIB::snAgentBoot,,,,,,
.1.3.6.1.4.1.11.2.3.7.11.12.1.2.4.1,HP-SN-AGENT-MIB::snAgBootSeqTable,,not-accessible,,mandatory,,A table of image load sequnce instructions to the boot code.
.1.3.6.1.4.1.11.2.3.7.11.12.1.2.4.1.1,HP-SN-AGENT-MIB::snAgBootSeqEntry,,not-accessible,snAgBootSeqIndex,mandatory,,A row in the boot sequence table.
.1.3.6.1.4.1.11.2.3.7.11.12.1.2.4.1.1.1,HP-SN-AGENT-MIB::snAgBootSeqIndex,INTEGER,read-only,,mandatory,,The index to the boot sequence table.
.1.3.6.1.4.1.11.2.3.7.11.12.1.2.4.1.1.2,HP-SN-AGENT-MIB::snAgBootSeqInstruction,INTEGER,read-write,,mandatory,fromPrimaryFlash(1):fromSecondaryFlash(2):fromTftpServer(3):fromBootpServer(4),The instruction for the boot code.
.1.3.6.1.4.1.11.2.3.7.11.12.1.2.4.1.1.3,HP-SN-AGENT-MIB::snAgBootSeqIpAddr,IpAddress,read-write,,mandatory,,The ip address of the TFTP server if snAgBootSeqInstruction
.1.3.6.1.4.1.11.2.3.7.11.12.1.2.4.1.1.4,HP-SN-AGENT-MIB::snAgBootSeqFilename,OCTET,read-write,,mandatory,,The image filename on the TFTP server if snAgBootSeqInstruction
.1.3.6.1.4.1.11.2.3.7.11.12.1.2.4.1.1.5,HP-SN-AGENT-MIB::snAgBootSeqRowStatus,INTEGER,read-write,,mandatory,other(1):valid(2):delete(3):create(4),To create or delete a boot sequence table entry.
.1.3.6.1.4.1.11.2.3.7.11.12.1.2.5,HP-SN-AGENT-MIB::snAgCfgEos,,,,,,
.1.3.6.1.4.1.11.2.3.7.11.12.1.2.5.1,HP-SN-AGENT-MIB::snAgCfgEosTable,,not-accessible,,mandatory,,This table represents the fragmented Configuration File data packet 
.1.3.6.1.4.1.11.2.3.7.11.12.1.2.5.1.1,HP-SN-AGENT-MIB::snAgCfgEosEntry,,not-accessible,snAgCfgEosIndex,mandatory,,An EOS row in the table of encoded octet strings for table 
.1.3.6.1.4.1.11.2.3.7.11.12.1.2.5.1.1.1,HP-SN-AGENT-MIB::snAgCfgEosIndex,INTEGER,read-only,,mandatory,,Each VLAN EOS Buffer Identifier have a multiple 
.1.3.6.1.4.1.11.2.3.7.11.12.1.2.5.1.1.2,HP-SN-AGENT-MIB::snAgCfgEosPacket,OCTET,read-write,,mandatory,,An encoded octet string. On reads it contains an integral 
.1.3.6.1.4.1.11.2.3.7.11.12.1.2.5.1.1.3,HP-SN-AGENT-MIB::snAgCfgEosChkSum,INTEGER,read-write,,mandatory,,A checksum of each configuration file data packet.
.1.3.6.1.4.1.11.2.3.7.11.12.1.2.6,HP-SN-AGENT-MIB::snAgentLog,,,,,,
.1.3.6.1.4.1.11.2.3.7.11.12.1.2.6.1,HP-SN-AGENT-MIB::snAgSysLogGbl,,,,,,
.1.3.6.1.4.1.11.2.3.7.11.12.1.2.6.1.1,HP-SN-AGENT-MIB::snAgSysLogGblEnable,INTEGER,read-write,,mandatory,disabled(0):enabled(1),Enable/disable system logging.
.1.3.6.1.4.1.11.2.3.7.11.12.1.2.6.1.2,HP-SN-AGENT-MIB::snAgSysLogGblBufferSize,INTEGER,read-write,,mandatory,,The number of dynamic system logging entries.
.1.3.6.1.4.1.11.2.3.7.11.12.1.2.6.1.3,HP-SN-AGENT-MIB::snAgSysLogGblClear,INTEGER,read-write,,mandatory,normal(0):clearAll(1):clearDynamic(2):clearStatic(3),Clear dynamic and/or static system logging buffers.
.1.3.6.1.4.1.11.2.3.7.11.12.1.2.6.1.4,HP-SN-AGENT-MIB::snAgSysLogGblCriticalLevel,INTEGER,read-write,,mandatory,,Filter events going to the logging buffer. This is a packed
.1.3.6.1.4.1.11.2.3.7.11.12.1.2.6.1.5,HP-SN-AGENT-MIB::snAgSysLogGblLoggedCount,Counter32,read-only,,mandatory,,The number events logged in the system logging buffer.
.1.3.6.1.4.1.11.2.3.7.11.12.1.2.6.1.6,HP-SN-AGENT-MIB::snAgSysLogGblDroppedCount,Counter32,read-only,,mandatory,,The number of events dropped.
.1.3.6.1.4.1.11.2.3.7.11.12.1.2.6.1.7,HP-SN-AGENT-MIB::snAgSysLogGblFlushedCount,Counter32,read-only,,mandatory,,The number of times that the system logging buffer was cleared.
.1.3.6.1.4.1.11.2.3.7.11.12.1.2.6.1.8,HP-SN-AGENT-MIB::snAgSysLogGblOverrunCount,Counter32,read-only,,mandatory,,The number of times that the system logging buffer was wrapped
.1.3.6.1.4.1.11.2.3.7.11.12.1.2.6.1.9,HP-SN-AGENT-MIB::snAgSysLogGblServer,IpAddress,read-write,,deprecated,,IP address of syslog server.
.1.3.6.1.4.1.11.2.3.7.11.12.1.2.6.1.10,HP-SN-AGENT-MIB::snAgSysLogGblFacility,INTEGER,read-write,,mandatory,kern(1):user(2):mail(3):daemon(4):auth(5):syslog(6):lpr(7):news(8):uucp(9):sys9(10):sys10(11):sys11(12):sys12(13):sys13(14):sys14(15):cron(16):local0(17):local1(18):local2(19):local3(20):local4(21):local5(22):local6(23):local7(24),Facility code.
.1.3.6.1.4.1.11.2.3.7.11.12.1.2.6.2,HP-SN-AGENT-MIB::snAgSysLogBufferTable,,not-accessible,,mandatory,,Dynamic system logging buffer table.
.1.3.6.1.4.1.11.2.3.7.11.12.1.2.6.2.1,HP-SN-AGENT-MIB::snAgSysLogBufferEntry,,not-accessible,snAgSysLogBufferIndex,mandatory,,A row in the dynamic system logging buffer table.
.1.3.6.1.4.1.11.2.3.7.11.12.1.2.6.2.1.1,HP-SN-AGENT-MIB::snAgSysLogBufferIndex,INTEGER,read-only,,mandatory,,The index to the dynamic system logging buffer table.
.1.3.6.1.4.1.11.2.3.7.11.12.1.2.6.2.1.2,HP-SN-AGENT-MIB::snAgSysLogBufferTimeStamp,TimeTicks,read-only,,mandatory,,A time stamp when the event is logged.
.1.3.6.1.4.1.11.2.3.7.11.12.1.2.6.2.1.3,HP-SN-AGENT-MIB::snAgSysLogBufferCriticalLevel,INTEGER,read-only,,mandatory,other(1):alert(2):critical(3):debugging(4):emergency(5):error(6):informational(7):notification(8):warning(9),The critical level of this event.
.1.3.6.1.4.1.11.2.3.7.11.12.1.2.6.2.1.4,HP-SN-AGENT-MIB::snAgSysLogBufferMessage,OCTET,read-only,,mandatory,,The system logging message.
.1.3.6.1.4.1.11.2.3.7.11.12.1.2.6.2.1.5,HP-SN-AGENT-MIB::snAgSysLogBufferCalTimeStamp,OCTET,read-only,,mandatory,,A time stamp when the event is logged. This object returns
.1.3.6.1.4.1.11.2.3.7.11.12.1.2.6.3,HP-SN-AGENT-MIB::snAgStaticSysLogBufferTable,,not-accessible,,mandatory,,Static system logging buffer table.
.1.3.6.1.4.1.11.2.3.7.11.12.1.2.6.3.1,HP-SN-AGENT-MIB::snAgStaticSysLogBufferEntry,,not-accessible,snAgStaticSysLogBufferIndex,mandatory,,A row in the static system logging buffer table.
.1.3.6.1.4.1.11.2.3.7.11.12.1.2.6.3.1.1,HP-SN-AGENT-MIB::snAgStaticSysLogBufferIndex,INTEGER,read-only,,mandatory,,The index to the static system logging buffer table.
.1.3.6.1.4.1.11.2.3.7.11.12.1.2.6.3.1.2,HP-SN-AGENT-MIB::snAgStaticSysLogBufferTimeStamp,TimeTicks,read-only,,mandatory,,A time stamp when the event is logged.
.1.3.6.1.4.1.11.2.3.7.11.12.1.2.6.3.1.3,HP-SN-AGENT-MIB::snAgStaticSysLogBufferCriticalLevel,INTEGER,read-only,,mandatory,other(1):alert(2):critical(3):debugging(4):emergency(5):error(6):informational(7):notification(8):warning(9),The critical level of this event.
.1.3.6.1.4.1.11.2.3.7.11.12.1.2.6.3.1.4,HP-SN-AGENT-MIB::snAgStaticSysLogBufferMessage,OCTET,read-only,,mandatory,,The system logging message.
.1.3.6.1.4.1.11.2.3.7.11.12.1.2.6.3.1.5,HP-SN-AGENT-MIB::snAgStaticSysLogBufferCalTimeStamp,OCTET,read-only,,mandatory,,A time stamp when the event is logged. This object returns
.1.3.6.1.4.1.11.2.3.7.11.12.1.2.6.4,HP-SN-AGENT-MIB::snAgSysLogServerTable,,not-accessible,,mandatory,,System Log Server table.
.1.3.6.1.4.1.11.2.3.7.11.12.1.2.6.4.1,HP-SN-AGENT-MIB::snAgSysLogServerEntry,,not-accessible,snAgSysLogServerIP:snAgSysLogServerUDPPort,mandatory,,A row in the SysLog Server table.
.1.3.6.1.4.1.11.2.3.7.11.12.1.2.6.4.1.1,HP-SN-AGENT-MIB::snAgSysLogServerIP,IpAddress,read-write,,mandatory,,IP address of syslog server.
.1.3.6.1.4.1.11.2.3.7.11.12.1.2.6.4.1.2,HP-SN-AGENT-MIB::snAgSysLogServerUDPPort,INTEGER,read-write,,mandatory,,UDP port number of syslog server.
.1.3.6.1.4.1.11.2.3.7.11.12.1.2.6.4.1.3,HP-SN-AGENT-MIB::snAgSysLogServerRowStatus,INTEGER,read-write,,mandatory,other(1):valid(2):delete(3):create(4),This object is used to create and
.1.3.6.1.4.1.11.2.3.7.11.12.1.2.7,HP-SN-AGENT-MIB::snAgentSysParaConfig,,,,,,
.1.3.6.1.4.1.11.2.3.7.11.12.1.2.7.1,HP-SN-AGENT-MIB::snAgentSysParaConfigTable,,not-accessible,,mandatory,,A table of Agent of each board.
.1.3.6.1.4.1.11.2.3.7.11.12.1.2.7.1.1,HP-SN-AGENT-MIB::snAgentSysParaConfigEntry,,not-accessible,snAgentSysParaConfigIndex,mandatory,,A row in the Agent System Parameters Configuation table.
.1.3.6.1.4.1.11.2.3.7.11.12.1.2.7.1.1.1,HP-SN-AGENT-MIB::snAgentSysParaConfigIndex,INTEGER,read-only,,mandatory,,The index to the Agent System Parameters Configuation Table.
.1.3.6.1.4.1.11.2.3.7.11.12.1.2.7.1.1.2,HP-SN-AGENT-MIB::snAgentSysParaConfigDescription,OCTET,read-only,,mandatory,,The main board description string.
.1.3.6.1.4.1.11.2.3.7.11.12.1.2.7.1.1.3,HP-SN-AGENT-MIB::snAgentSysParaConfigMin,INTEGER,read-only,,mandatory,,The minimum value of this Agent System Parameter.
.1.3.6.1.4.1.11.2.3.7.11.12.1.2.7.1.1.4,HP-SN-AGENT-MIB::snAgentSysParaConfigMax,INTEGER,read-only,,mandatory,,The maximum value of this Agent System Parameter.
.1.3.6.1.4.1.11.2.3.7.11.12.1.2.7.1.1.5,HP-SN-AGENT-MIB::snAgentSysParaConfigDefault,INTEGER,read-only,,mandatory,,The default value of this Agent System Parameter.
.1.3.6.1.4.1.11.2.3.7.11.12.1.2.7.1.1.6,HP-SN-AGENT-MIB::snAgentSysParaConfigCurrent,INTEGER,read-write,,mandatory,,The current configurated value of this Agent System Parameter.
.1.3.6.1.4.1.11.2.3.7.11.12.1.2.8,HP-SN-AGENT-MIB::snAgentConfigModule,,,,,,
.1.3.6.1.4.1.11.2.3.7.11.12.1.2.8.1,HP-SN-AGENT-MIB::snAgentConfigModuleTable,,not-accessible,,mandatory,,A table of each configured module information.
.1.3.6.1.4.1.11.2.3.7.11.12.1.2.8.1.1,HP-SN-AGENT-MIB::snAgentConfigModuleEntry,,not-accessible,snAgentConfigModuleIndex,mandatory,,A row in the Agent Configured Module table.
.1.3.6.1.4.1.11.2.3.7.11.12.1.2.8.1.1.1,HP-SN-AGENT-MIB::snAgentConfigModuleIndex,INTEGER,read-only,,mandatory,,The index to the Agent Configured Module Table.
.1.3.6.1.4.1.11.2.3.7.11.12.1.2.8.1.1.2,HP-SN-AGENT-MIB::snAgentConfigModuleType,INTEGER,read-write,,mandatory,bi8PortGigManagementModule(0):bi4PortGigManagementModule(1):bi16PortCopperManagementModule(2):bi4PortGigModule(3):fi2PortGigManagementModule(4):fi4PortGigManagementModule(5):bi8PortGigCopperManagementModule(6):fi8PortGigManagementModule(7):bi8PortGigModule(8):bi24PortCopperModule(10):fi24PortCopperModule(11):bi16Port100FXModule(12):bi8Port100FXModule(13):bi8PortGigCopperModule(14):bi2PortGigManagementModule(18):bi24Port100FXModule(19):bi0PortManagementModule(20):pos622MbsModule(21):pos155MbsModule(22):bi2PortGigModule(23):bi2PortGigCopperModule(24):fi2PortGigModule(25):fi4PortGigModule(26):fi8PortGigModule(27):fi8PortGigCopperModule(28):fi8PortGigCopperManagementModule(29):pos155Mbs2PModule(30):fi4PortGigCopperManagementModule(31):fi2PortGigCopperManagementModule(32):bi4PortGigCopperManagementModule(33):bi2PortGigCopperManagementModule(34):bi8PortGigM4ManagementModule(35):bi4PortGigM4ManagementModule(36):bi2PortGigM4ManagementModule(37):bi0PortGigM4ManagementModule(38):bi0PortWSMManagementModule(39):biPos2Port2488MbsModule(40):bi0PortWSMModule(41):niPos2Port2488MbsModule(42):ni4802(43):bi4PortGigNPAModule(44):biAtm2Port155MbsModule(45):biAtm4Port155MbsModule(46):bi1Port10GigModule(47):biFiJc48ePort100fxIpcModule(195):biFiJc48tPort100fxIpcModule(196):biFiJc8PortGigM4ManagementModule(197):biFiJc8PortGigIgcModule(198),The Configured Module Type.
.1.3.6.1.4.1.11.2.3.7.11.12.1.2.8.1.1.3,HP-SN-AGENT-MIB::snAgentConfigModuleRowStatus,INTEGER,read-write,,mandatory,other(1):valid(2):delete(3):create(4),To create or delete a configured module table entry.
.1.3.6.1.4.1.11.2.3.7.11.12.1.2.8.1.1.4,HP-SN-AGENT-MIB::snAgentConfigModuleDescription,OCTET,read-only,,mandatory,,A description of the configured module.
.1.3.6.1.4.1.11.2.3.7.11.12.1.2.8.1.1.5,HP-SN-AGENT-MIB::snAgentConfigModuleOperStatus,OCTET,read-only,,mandatory,,Module operational status. Zero length string indicates
.1.3.6.1.4.1.11.2.3.7.11.12.1.2.8.1.1.6,HP-SN-AGENT-MIB::snAgentConfigModuleSerialNumber,OCTET,read-only,,mandatory,,Module serial number. Zero length string indicates that
.1.3.6.1.4.1.11.2.3.7.11.12.1.2.8.1.1.7,HP-SN-AGENT-MIB::snAgentConfigModuleNumberOfPorts,INTEGER,read-only,,mandatory,,The number of ports of module.
.1.3.6.1.4.1.11.2.3.7.11.12.1.2.8.1.1.8,HP-SN-AGENT-MIB::snAgentConfigModuleMgmtModuleType,INTEGER,read-only,,mandatory,other(1):nonManagementModule(2):unknownManagementModule(3):m1ManagementModule(4):m2ManagementModule(5):m3ManagementModule(6):m4ManagementModule(7):m5ManagementModule(8):jetcoreStackManagementModule(9),Management module type.
.1.3.6.1.4.1.11.2.3.7.11.12.1.2.8.1.1.9,HP-SN-AGENT-MIB::snAgentConfigModuleNumberOfCpus,INTEGER,read-only,,mandatory,,The number of module CPUs.
.1.3.6.1.4.1.11.2.3.7.11.12.1.2.9,HP-SN-AGENT-MIB::snAgentUser,,,,,,
.1.3.6.1.4.1.11.2.3.7.11.12.1.2.9.1,HP-SN-AGENT-MIB::snAgentUserGbl,,,,,,
.1.3.6.1.4.1.11.2.3.7.11.12.1.2.9.1.1,HP-SN-AGENT-MIB::snAgentUserMaxAccnt,INTEGER,read-only,,mandatory,,Maximum number of user account entries can be configured.
.1.3.6.1.4.1.11.2.3.7.11.12.1.2.9.2,HP-SN-AGENT-MIB::snAgentUserAccntTable,,not-accessible,,mandatory,,A table of user account information.
.1.3.6.1.4.1.11.2.3.7.11.12.1.2.9.2.1,HP-SN-AGENT-MIB::snAgentUserAccntEntry,,not-accessible,snAgentUserAccntName,mandatory,,A row in the Agent User table.
.1.3.6.1.4.1.11.2.3.7.11.12.1.2.9.2.1.1,HP-SN-AGENT-MIB::snAgentUserAccntName,OCTET,read-only,,mandatory,,The user name.
.1.3.6.1.4.1.11.2.3.7.11.12.1.2.9.2.1.2,HP-SN-AGENT-MIB::snAgentUserAccntPassword,OCTET,read-write,,mandatory,,The user password.
.1.3.6.1.4.1.11.2.3.7.11.12.1.2.9.2.1.3,HP-SN-AGENT-MIB::snAgentUserAccntEncryptCode,INTEGER,read-write,,mandatory,,The password encryption method code.
.1.3.6.1.4.1.11.2.3.7.11.12.1.2.9.2.1.4,HP-SN-AGENT-MIB::snAgentUserAccntPrivilege,INTEGER,read-write,,mandatory,,The user privilege.
.1.3.6.1.4.1.11.2.3.7.11.12.1.2.9.2.1.5,HP-SN-AGENT-MIB::snAgentUserAccntRowStatus,INTEGER,read-write,,mandatory,other(1):valid(2):delete(3):create(4):modify(5),To create or delete a user account table entry.
.1.3.6.1.4.1.11.2.3.7.11.12.1.2.10,HP-SN-AGENT-MIB::snAgentRedundant,,,,,,
.1.3.6.1.4.1.11.2.3.7.11.12.1.2.10.1,HP-SN-AGENT-MIB::snAgentRedunGbl,,,,,,
.1.3.6.1.4.1.11.2.3.7.11.12.1.2.10.1.1,HP-SN-AGENT-MIB::snAgentRedunActiveMgmtMod,INTEGER,read-write,,mandatory,,Slot number of the active management module. Setting
.1.3.6.1.4.1.11.2.3.7.11.12.1.2.10.1.2,HP-SN-AGENT-MIB::snAgentRedunSyncConfig,INTEGER,read-write,,mandatory,,Frequency of the backup management module copying the
.1.3.6.1.4.1.11.2.3.7.11.12.1.2.10.1.3,HP-SN-AGENT-MIB::snAgentRedunBkupCopyBootCode,INTEGER,read-write,,mandatory,disabled(0):enabled(1),If enabled(1), the backup management module copies the boot code
.1.3.6.1.4.1.11.2.3.7.11.12.1.2.10.1.4,HP-SN-AGENT-MIB::snAgentEnableMgmtModRedunStateChangeTrap,INTEGER,read-write,,mandatory,disabled(0):enabled(1),Indicates whether the SNMP agent process is permitted to
.1.3.6.1.4.1.11.2.3.7.11.12.1.2.10.1.5,HP-SN-AGENT-MIB::snAgentRedunBkupBootLoad,INTEGER,read-write,,mandatory,normal(1):operationError(17):downloadBackup(20),Action object to down load a new boot code from boot flash storage
.1.3.6.1.4.1.11.2.3.7.11.12.1.2.10.1.6,HP-SN-AGENT-MIB::snAgentRedunSwitchOver,INTEGER,read-write,,mandatory,other(1):reset(2),To force a switch-over from standby to active state
.1.3.6.1.4.1.11.2.3.7.11.12.1.2.11,HP-SN-AGENT-MIB::snAgentCpu,,,,,,
.1.3.6.1.4.1.11.2.3.7.11.12.1.2.11.1,HP-SN-AGENT-MIB::snAgentCpuUtilTable,,not-accessible,,mandatory,,Table to list utilization for all CPUs in the device.
.1.3.6.1.4.1.11.2.3.7.11.12.1.2.11.1.1,HP-SN-AGENT-MIB::snAgentCpuUtilEntry,,not-accessible,snAgentCpuUtilSlotNum:snAgentCpuUtilCpuId:snAgentCpuUtilInterval,mandatory,,A row in the CPU utilization table.
.1.3.6.1.4.1.11.2.3.7.11.12.1.2.11.1.1.1,HP-SN-AGENT-MIB::snAgentCpuUtilSlotNum,INTEGER,read-only,,mandatory,,The slot number of module which contains the cpu.
.1.3.6.1.4.1.11.2.3.7.11.12.1.2.11.1.1.2,HP-SN-AGENT-MIB::snAgentCpuUtilCpuId,INTEGER,read-only,,mandatory,,The id of cpu. For non-VM1/WSM management module, there is one CPU.
.1.3.6.1.4.1.11.2.3.7.11.12.1.2.11.1.1.3,HP-SN-AGENT-MIB::snAgentCpuUtilInterval,INTEGER,read-only,,mandatory,,The value, in seconds, for this utilization. For both management and slave CPU, we display
.1.3.6.1.4.1.11.2.3.7.11.12.1.2.11.1.1.4,HP-SN-AGENT-MIB::snAgentCpuUtilValue,Gauge32,read-only,,mandatory,,The statistical CPU utilization in units of one-hundredth of a percent.
.1.3.6.1.4.1.11.2.3.7.11.12.1.2.12,HP-SN-AGENT-MIB::snAgentHw,,,,,,
.1.3.6.1.4.1.11.2.3.7.11.12.1.2.12.1,HP-SN-AGENT-MIB::snAgentHwICBMCounterTable,,not-accessible,,mandatory,,Table to list the ICBM counter values.
.1.3.6.1.4.1.11.2.3.7.11.12.1.2.12.1.1,HP-SN-AGENT-MIB::snAgentHwICBMCounterEntry,,not-accessible,snAgentHwICBMCounterSlot:snAgentHwICBMCounterDMA,mandatory,,A row representing ICBM counter values for that slot.
.1.3.6.1.4.1.11.2.3.7.11.12.1.2.12.1.1.1,HP-SN-AGENT-MIB::snAgentHwICBMCounterSlot,Unsigned32,read-only,,mandatory,,Slot number where ICBM resides.
.1.3.6.1.4.1.11.2.3.7.11.12.1.2.12.1.1.2,HP-SN-AGENT-MIB::snAgentHwICBMCounterDMA,Unsigned32,read-only,,mandatory,,DMA Id within a slot where ICBM resides. Valid only for Jetcore modules.
.1.3.6.1.4.1.11.2.3.7.11.12.1.2.12.1.1.3,HP-SN-AGENT-MIB::snAgentHwICBMCounterFreeDepth,Counter32,read-only,,mandatory,,Current depth of the free queue for this ICBM.
.1.3.6.1.4.1.11.2.3.7.11.12.1.2.12.1.1.4,HP-SN-AGENT-MIB::snAgentHwICBMCounterWriteDrop,Counter32,read-only,,mandatory,,Write sequencer drop count for this ICBM.
.1.3.6.1.4.1.11.2.3.7.11.12.1.2.12.1.1.5,HP-SN-AGENT-MIB::snAgentHwICBMCounterWriteInput,Counter32,read-only,,mandatory,,Write sequencer input counter for this ICBM.
.1.3.6.1.4.1.11.2.3.7.11.12.1.2.12.1.1.6,HP-SN-AGENT-MIB::snAgentHwICBMCounterWriteOutput,Counter32,read-only,,mandatory,,Write sequencer output counter for this ICBM.
.1.3.6.1.4.1.11.2.3.7.11.12.1.2.12.1.1.7,HP-SN-AGENT-MIB::snAgentHwICBMCounterReadInput,Counter32,read-only,,mandatory,,Read sequencer input counter for this ICBM.
.1.3.6.1.4.1.11.2.3.7.11.12.1.2.12.1.1.8,HP-SN-AGENT-MIB::snAgentHwICBMCounterReadOutput,Counter32,read-only,,mandatory,,Read sequencer output counter for this ICBM.
.1.3.6.1.4.1.11.2.3.7.11.12.1.3,HP-SN-ROOT-MIB::snSwitch,,,,,,
.1.3.6.1.4.1.11.2.3.7.11.12.1.3.1,HP-SN-SWITCH-GROUP-MIB::snSwInfo,,,,,,
.1.3.6.1.4.1.11.2.3.7.11.12.1.3.1.1,HP-SN-SWITCH-GROUP-MIB::snSwGroupOperMode,INTEGER,read-write,,mandatory,noVLan(1):vlanByPort(2),noVLan(1) represents all switch ports with no virtual 
.1.3.6.1.4.1.11.2.3.7.11.12.1.3.1.2,HP-SN-SWITCH-GROUP-MIB::snSwGroupIpL3SwMode,INTEGER,read-write,,mandatory,disabled(0):enabled(1),The Switch Group is configured with the Layer3
.1.3.6.1.4.1.11.2.3.7.11.12.1.3.1.3,HP-SN-SWITCH-GROUP-MIB::snSwGroupIpMcastMode,INTEGER,read-write,,mandatory,disabled(0):enabled(1),The Switch Group is configured with the IP Multicast
.1.3.6.1.4.1.11.2.3.7.11.12.1.3.1.4,HP-SN-SWITCH-GROUP-MIB::snSwGroupDefaultCfgMode,INTEGER,read-write,,mandatory,default(1):nonDefault(2),The Switch Group is configured with the Default
.1.3.6.1.4.1.11.2.3.7.11.12.1.3.1.5,HP-SN-SWITCH-GROUP-MIB::snSwGroupSwitchAgeTime,INTEGER,read-write,,mandatory,,The Switch Age time is 180sec by default.
.1.3.6.1.4.1.11.2.3.7.11.12.1.3.1.6,HP-SN-SWITCH-GROUP-MIB::snVLanGroupVlanCurEntry,INTEGER,read-only,,mandatory,,The current total entry number of VLANs are configured.
.1.3.6.1.4.1.11.2.3.7.11.12.1.3.1.7,HP-SN-SWITCH-GROUP-MIB::snVLanGroupSetAllVLan,INTEGER,read-write,,mandatory,,The value of this object is the VLanIndex of a particalur that particular entry prior to setting this object.
.1.3.6.1.4.1.11.2.3.7.11.12.1.3.1.8,HP-SN-SWITCH-GROUP-MIB::snSwPortSetAll,INTEGER,read-write,,mandatory,,The value of this object is the index number of the
.1.3.6.1.4.1.11.2.3.7.11.12.1.3.1.9,HP-SN-SWITCH-GROUP-MIB::snFdbTableCurEntry,INTEGER,read-only,,mandatory,,The current total entry number of FDB are configured.
.1.3.6.1.4.1.11.2.3.7.11.12.1.3.1.10,HP-SN-SWITCH-GROUP-MIB::snFdbTableStationFlush,INTEGER,read-write,,mandatory,normal(1):error(2):flush(3):flushing(4),The following values of the flush state
.1.3.6.1.4.1.11.2.3.7.11.12.1.3.1.11,HP-SN-SWITCH-GROUP-MIB::snPortStpSetAll,INTEGER,read-write,,mandatory,,The value of this object is 1 which means invoking Port STP Set-all command. The snPortStpPriority,  snPortStpPathCost, the read-write STP related  attributes of the first row of table will be used  to set the same attributes for all the ports in the  system. 
.1.3.6.1.4.1.11.2.3.7.11.12.1.3.1.12,HP-SN-SWITCH-GROUP-MIB::snSwProbePortNum,INTEGER,read-write,,mandatory,,A chassis switch probe port is operated as a traffic analyzer
.1.3.6.1.4.1.11.2.3.7.11.12.1.3.1.13,HP-SN-SWITCH-GROUP-MIB::snSw8021qTagMode,INTEGER,read-write,,mandatory,disabled(0):enabled(1),The Switch Group is configured with the IEEE802.1q
.1.3.6.1.4.1.11.2.3.7.11.12.1.3.1.14,HP-SN-SWITCH-GROUP-MIB::snSwGlobalStpMode,INTEGER,read-write,,mandatory,disabled(0):enabled(1),Spanning Tree System Global Mode in the Switch Group 
.1.3.6.1.4.1.11.2.3.7.11.12.1.3.1.15,HP-SN-SWITCH-GROUP-MIB::snSwIpMcastQuerierMode,INTEGER,read-write,,mandatory,querier(1):nonQuerier(2),The IP Multicast pruning mode is configured either 
.1.3.6.1.4.1.11.2.3.7.11.12.1.3.1.17,HP-SN-SWITCH-GROUP-MIB::snSwViolatorPortNumber,INTEGER,read-only,,mandatory,,The port number of the switch or router that received
.1.3.6.1.4.1.11.2.3.7.11.12.1.3.1.18,HP-SN-SWITCH-GROUP-MIB::snSwViolatorMacAddress,OCTET,read-only,,mandatory,,The source address of the violator packet received
.1.3.6.1.4.1.11.2.3.7.11.12.1.3.1.19,HP-SN-SWITCH-GROUP-MIB::snVLanGroupVlanMaxEntry,INTEGER,read-write,,mandatory,,The maximum number of VLAN entries are allowed to configure.
.1.3.6.1.4.1.11.2.3.7.11.12.1.3.1.20,HP-SN-SWITCH-GROUP-MIB::snSwEosBufferSize,INTEGER,read-only,,mandatory,,A specific buffer size for all the different EOS buffers.
.1.3.6.1.4.1.11.2.3.7.11.12.1.3.1.21,HP-SN-SWITCH-GROUP-MIB::snVLanByPortEntrySize,INTEGER,read-only,,mandatory,,The size of each VLAN table entry.
.1.3.6.1.4.1.11.2.3.7.11.12.1.3.1.22,HP-SN-SWITCH-GROUP-MIB::snSwPortEntrySize,INTEGER,read-only,,mandatory,,The size of each port table entry.
.1.3.6.1.4.1.11.2.3.7.11.12.1.3.1.23,HP-SN-SWITCH-GROUP-MIB::snFdbStationEntrySize,INTEGER,read-only,,mandatory,,The size of each Fdb station table entry.
.1.3.6.1.4.1.11.2.3.7.11.12.1.3.1.24,HP-SN-SWITCH-GROUP-MIB::snPortStpEntrySize,INTEGER,read-only,,mandatory,,The size of each port stp table entry.
.1.3.6.1.4.1.11.2.3.7.11.12.1.3.1.25,HP-SN-SWITCH-GROUP-MIB::snSwEnableBridgeNewRootTrap,INTEGER,read-write,,mandatory,disabled(0):enabled(1),Indicates whether the SNMP agent process is
.1.3.6.1.4.1.11.2.3.7.11.12.1.3.1.26,HP-SN-SWITCH-GROUP-MIB::snSwEnableBridgeTopoChangeTrap,INTEGER,read-write,,mandatory,disabled(0):enabled(1),Indicates whether the SNMP agent process is
.1.3.6.1.4.1.11.2.3.7.11.12.1.3.1.27,HP-SN-SWITCH-GROUP-MIB::snSwEnableLockedAddrViolationTrap,INTEGER,read-write,,mandatory,disabled(0):enabled(1),Indicates whether the SNMP agent process is
.1.3.6.1.4.1.11.2.3.7.11.12.1.3.1.28,HP-SN-SWITCH-GROUP-MIB::snSwIpxL3SwMode,INTEGER,read-write,,mandatory,disabled(0):enabled(1),The Switch Group is configured with the Layer3
.1.3.6.1.4.1.11.2.3.7.11.12.1.3.1.29,HP-SN-SWITCH-GROUP-MIB::snVLanByIpSubnetMaxSubnets,INTEGER,read-only,,mandatory,,The maximum number of subnets for each IP VLAN.
.1.3.6.1.4.1.11.2.3.7.11.12.1.3.1.30,HP-SN-SWITCH-GROUP-MIB::snVLanByIpxNetMaxNetworks,INTEGER,read-only,,mandatory,,The maximum number of networks for each IPX VLAN.
.1.3.6.1.4.1.11.2.3.7.11.12.1.3.1.31,HP-SN-SWITCH-GROUP-MIB::snSwProtocolVLanMode,INTEGER,read-write,,mandatory,disabled(0):enabled(1),disabled(0) - represents system with Protocol VLAN disabled. 
.1.3.6.1.4.1.11.2.3.7.11.12.1.3.1.32,HP-SN-SWITCH-GROUP-MIB::snMacStationVLanId,INTEGER,read-write,,mandatory,,This MAC Station VLAN ID index to the standard Forwarding Database for Transparent Bridge Table.
.1.3.6.1.4.1.11.2.3.7.11.12.1.3.1.33,HP-SN-SWITCH-GROUP-MIB::snSwClearCounters,INTEGER,read-write,,mandatory,valid(0):clear(1),valid(0) - a SNMP-GET of this mib shows that it is valid command to use. 
.1.3.6.1.4.1.11.2.3.7.11.12.1.3.1.34,HP-SN-SWITCH-GROUP-MIB::snSw8021qTagType,INTEGER,read-write,,mandatory,,The IEEE802.1q tag type embedded in the length/type field of
.1.3.6.1.4.1.11.2.3.7.11.12.1.3.1.35,HP-SN-SWITCH-GROUP-MIB::snSwBroadcastLimit,INTEGER,read-write,,mandatory,,Limit the number of broadcast packets to forward out of the
.1.3.6.1.4.1.11.2.3.7.11.12.1.3.1.36,HP-SN-SWITCH-GROUP-MIB::snSwMaxMacFilterPerSystem,INTEGER,read-only,,mandatory,,The maximum number of MAC Filters per system in the MAC Filter table.
.1.3.6.1.4.1.11.2.3.7.11.12.1.3.1.37,HP-SN-SWITCH-GROUP-MIB::snSwMaxMacFilterPerPort,INTEGER,read-only,,mandatory,,The maximum number of MAC Filters per port in the Port MAC Access Filter table.
.1.3.6.1.4.1.11.2.3.7.11.12.1.3.1.38,HP-SN-SWITCH-GROUP-MIB::snSwDefaultVLanId,INTEGER,read-write,,mandatory,,The VLAN ID of the DEFAULT PORT-VLAN.
.1.3.6.1.4.1.11.2.3.7.11.12.1.3.1.39,HP-SN-SWITCH-GROUP-MIB::snSwGlobalAutoNegotiate,INTEGER,read-write,,mandatory,disabled(0):enabled(1):negFullAuto(2):other(3),This feature only applies to Gigabit Ethernet ports. If set
.1.3.6.1.4.1.11.2.3.7.11.12.1.3.1.40,HP-SN-SWITCH-GROUP-MIB::snSwQosMechanism,INTEGER,read-write,,mandatory,strict(0):weighted(1),Indicates whether the qos mechanism is
.1.3.6.1.4.1.11.2.3.7.11.12.1.3.1.41,HP-SN-SWITCH-GROUP-MIB::snSwSingleStpMode,INTEGER,read-write,,mandatory,disabled(0):enabled(1),Single Spanning Tree System Mode in the Switch Group 
.1.3.6.1.4.1.11.2.3.7.11.12.1.3.1.42,HP-SN-SWITCH-GROUP-MIB::snSwFastStpMode,INTEGER,read-write,,mandatory,disabled(0):enabled(1),Fast Spanning Tree System Mode in the Switch Group 
.1.3.6.1.4.1.11.2.3.7.11.12.1.3.2,HP-SN-SWITCH-GROUP-MIB::snVLanInfo,,,,,,
.1.3.6.1.4.1.11.2.3.7.11.12.1.3.2.1,HP-SN-SWITCH-GROUP-MIB::snVLanByPortTable,,not-accessible,,deprecated,,If snSwGroupOperMode is configured as basic mode
.1.3.6.1.4.1.11.2.3.7.11.12.1.3.2.1.1,HP-SN-SWITCH-GROUP-MIB::snVLanByPortEntry,,not-accessible,snVLanByPortVLanIndex,deprecated,,An entry in the VLAN By Port Information table.
.1.3.6.1.4.1.11.2.3.7.11.12.1.3.2.1.1.1,HP-SN-SWITCH-GROUP-MIB::snVLanByPortVLanIndex,INTEGER,read-only,,deprecated,,The VLAN ID index must not be greater than the 
.1.3.6.1.4.1.11.2.3.7.11.12.1.3.2.1.1.2,HP-SN-SWITCH-GROUP-MIB::snVLanByPortVLanId,INTEGER,read-write,,deprecated,,The VLAN ID index to the VLAN By Port Info Table.
.1.3.6.1.4.1.11.2.3.7.11.12.1.3.2.1.1.3,HP-SN-SWITCH-GROUP-MIB::snVLanByPortPortMask,INTEGER,read-write,,deprecated,,The Standand-alone switch VLAN port membership. (It was obsoleted for Chassis Product)
.1.3.6.1.4.1.11.2.3.7.11.12.1.3.2.1.1.4,HP-SN-SWITCH-GROUP-MIB::snVLanByPortQos,INTEGER,read-write,,deprecated,level0(0):level1(1):level2(2):level3(3):level4(4):level5(5):level6(6):level7(7),The Stand alone stackable switch VLAN Priority values are:
.1.3.6.1.4.1.11.2.3.7.11.12.1.3.2.1.1.5,HP-SN-SWITCH-GROUP-MIB::snVLanByPortStpMode,INTEGER,read-write,,deprecated,disabled(0):enabled(1),Spanning Tree Mode in the Switch Group can be set
.1.3.6.1.4.1.11.2.3.7.11.12.1.3.2.1.1.6,HP-SN-SWITCH-GROUP-MIB::snVLanByPortStpPriority,INTEGER,read-write,,deprecated,,dot1dStpPriority : The value of the write-able 
.1.3.6.1.4.1.11.2.3.7.11.12.1.3.2.1.1.7,HP-SN-SWITCH-GROUP-MIB::snVLanByPortStpGroupMaxAge,INTEGER,read-write,,deprecated,,dot1dStpBridgeMaxAge: From RFC1493(Bridge MIB). The value that all bridges use for MaxAge when  this bridge is acting as the root.  Note that 802.1D-1990 specifies that the  range for this parameter is related to the value of dot1dStpBridgeHelloTime. The granularity of this timer is specified by 802.1D-1990 to be 1 second. An agent may return a badValue error if a set is attempted to a value which is not a whole number of seconds.
.1.3.6.1.4.1.11.2.3.7.11.12.1.3.2.1.1.8,HP-SN-SWITCH-GROUP-MIB::snVLanByPortStpGroupHelloTime,INTEGER,read-write,,deprecated,,dot1dStpBridgeHelloTime: From RFC1493(Bridge MIB). The value that all bridges use for HelloTime when this bridge is acting as the root. The granularity of this timer is specified by 802.1D- 1990 to be 1 second. An agent may return a badValue error if a set is attempted to a value which is not a whole number of seconds.
.1.3.6.1.4.1.11.2.3.7.11.12.1.3.2.1.1.9,HP-SN-SWITCH-GROUP-MIB::snVLanByPortStpGroupForwardDelay,INTEGER,read-write,,deprecated,,dot1dStpBridgeForwardDelay : From RFC1493(Bridge MIB). The value that all bridges use for ForwardDelay when this bridge is acting as the root. Note that 802.1D-1990 specifies that the range for this parameter is related to the value of dot1dStpBridgeMaxAge. The granularity of this timer is specified by 802.1D-1990 to be 1 second. An agent may return a badValue error if a set is attempted to a value which is not a whole number of seconds.
.1.3.6.1.4.1.11.2.3.7.11.12.1.3.2.1.1.10,HP-SN-SWITCH-GROUP-MIB::snVLanByPortRowStatus,INTEGER,read-write,,deprecated,other(1):valid(2):delete(3):create(4):modify(5),This object is used to create and
.1.3.6.1.4.1.11.2.3.7.11.12.1.3.2.1.1.11,HP-SN-SWITCH-GROUP-MIB::snVLanByPortOperState,INTEGER,read-only,,deprecated,notActivated(0):activated(1),By default, this mode is set to notActivated(0).
.1.3.6.1.4.1.11.2.3.7.11.12.1.3.2.1.1.12,HP-SN-SWITCH-GROUP-MIB::snVLanByPortBaseNumPorts,INTEGER,read-only,,deprecated,,The number of ports controlled by this bridging entity.
.1.3.6.1.4.1.11.2.3.7.11.12.1.3.2.1.1.13,HP-SN-SWITCH-GROUP-MIB::snVLanByPortBaseType,INTEGER,read-only,,deprecated,unknown(1):transparent-only(2):sourceroute-only(3):srt(4),Indicates what type of bridging this bridge can perform. If a bridge is actually performing a certain type of bridging this will be indicated by entries in the port table for the given type.
.1.3.6.1.4.1.11.2.3.7.11.12.1.3.2.1.1.14,HP-SN-SWITCH-GROUP-MIB::snVLanByPortStpProtocolSpecification,INTEGER,read-only,,deprecated,unknown(1):decLb100(2):ieee8021d(3),An indication of what version of the Spanning Tree Protocol is being run. The value 'decLb100(2)' indicates the DEC LANbridge 100 Spanning Tree protocol. IEEE 802.1d implementations will return 'ieee8021d(3)'. If future versions of the IEEE Spanning Tree Protocol are released that are incompatible with the current version a new value will be defined.
.1.3.6.1.4.1.11.2.3.7.11.12.1.3.2.1.1.15,HP-SN-SWITCH-GROUP-MIB::snVLanByPortStpMaxAge,INTEGER,read-only,,deprecated,,dot1dStpMaxAge: From RFC1493(Bridge MIB). The maximum age of Spanning Tree Protocol information learned from the network on any port before it is discarded, in units of hundredths of a second. This is the actual value that this bridge is currently using.
.1.3.6.1.4.1.11.2.3.7.11.12.1.3.2.1.1.16,HP-SN-SWITCH-GROUP-MIB::snVLanByPortStpHelloTime,INTEGER,read-only,,deprecated,,dot1dStpHelloTime: From RFC1493(Bridge MIB). The amount of time between the transmission of Configuration bridge PDUs by this node on any port when it is the root of the spanning tree or trying to become so, in units of hundredths of a second. This is the actual value that this bridge is currently using.
.1.3.6.1.4.1.11.2.3.7.11.12.1.3.2.1.1.17,HP-SN-SWITCH-GROUP-MIB::snVLanByPortStpHoldTime,INTEGER,read-only,,deprecated,,dot1dStpHoldTime: From RFC1493(Bridge MIB). This time value determines the interval length during which no more than two Configuration bridge PDUs shall be transmitted by this node, in units of hundredths of a second.
.1.3.6.1.4.1.11.2.3.7.11.12.1.3.2.1.1.18,HP-SN-SWITCH-GROUP-MIB::snVLanByPortStpForwardDelay,INTEGER,read-only,,deprecated,,dot1dStpForwardDelay: From RFC1493(Bridge MIB). This time value, measured in units of hundredths of a second, controls how fast a port changes its spanning state when moving towards the Forwarding state. The value determines how long the port stays in each of the Listening and Learning states, which precede the Forwarding state. This value is also used, when a topology change has been detected and is underway, to age all dynamic entries in the Forwarding Database. [Note that this value is the one that this bridge is currently using, in contrast to dot1dStpBridgeForwardDelay which is the value that this bridge and all others would start using if/when this bridge were to become the root.]
.1.3.6.1.4.1.11.2.3.7.11.12.1.3.2.1.1.19,HP-SN-SWITCH-GROUP-MIB::snVLanByPortStpTimeSinceTopologyChange,TimeTicks,read-only,,deprecated,,The time (in hundredths of a second) since the last time a topology change was detected by the bridge entity.
.1.3.6.1.4.1.11.2.3.7.11.12.1.3.2.1.1.20,HP-SN-SWITCH-GROUP-MIB::snVLanByPortStpTopChanges,Counter32,read-only,,deprecated,,The total number of topology changes detected by this bridge since the management entity was last reset or initialized.
.1.3.6.1.4.1.11.2.3.7.11.12.1.3.2.1.1.21,HP-SN-SWITCH-GROUP-MIB::snVLanByPortStpRootCost,INTEGER,read-only,,deprecated,,dot1dStpRootCost: From RFC1493(Bridge MIB).  The cost of the path to the root as seen from this bridge.
.1.3.6.1.4.1.11.2.3.7.11.12.1.3.2.1.1.22,HP-SN-SWITCH-GROUP-MIB::snVLanByPortStpRootPort,INTEGER,read-only,,deprecated,,dot1dStpRootPort: From RFC1493(Bridge MIB). The port number of the port which offers the lowest cost path from this bridge to the root bridge.
.1.3.6.1.4.1.11.2.3.7.11.12.1.3.2.1.1.23,HP-SN-SWITCH-GROUP-MIB::snVLanByPortStpDesignatedRoot,OCTET,read-only,,deprecated,,dot1dStpDesignatedRoot: From RFC1493(Bridge MIB). The bridge identifier of the root of the spanning tree as determined by the Spanning Tree Protocol as executed by this node. This value is used as the Root Identifier parameter in all Configuration Bridge PDUs originated by this node.
.1.3.6.1.4.1.11.2.3.7.11.12.1.3.2.1.1.24,HP-SN-SWITCH-GROUP-MIB::snVLanByPortBaseBridgeAddress,OCTET,read-only,,deprecated,,The MAC address used by this bridge when it must be referred to in a unique fashion. It is recommended that this be the numerically smallest MAC address of all ports that belong to this bridge. However it is only required to be unique. When concatenated with dot1dStpPriority a unique BridgeIdentifier is formed which is used in the Spanning Tree Protocol.
.1.3.6.1.4.1.11.2.3.7.11.12.1.3.2.1.1.25,HP-SN-SWITCH-GROUP-MIB::snVLanByPortVLanName,OCTET,read-write,,deprecated,,VLAN Community Name string.
.1.3.6.1.4.1.11.2.3.7.11.12.1.3.2.1.1.26,HP-SN-SWITCH-GROUP-MIB::snVLanByPortRouterIntf,INTEGER,read-write,,deprecated,,Optional: A virtual interface for router to the VLAN -- applied to router only.
.1.3.6.1.4.1.11.2.3.7.11.12.1.3.2.1.1.27,HP-SN-SWITCH-GROUP-MIB::snVLanByPortChassisPortMask,OCTET,read-write,,deprecated,,The Chassis VLAN switch port membership.
.1.3.6.1.4.1.11.2.3.7.11.12.1.3.2.1.1.28,HP-SN-SWITCH-GROUP-MIB::snVLanByPortPortList,OCTET,read-write,,deprecated,,A list of port indices which are the port
.1.3.6.1.4.1.11.2.3.7.11.12.1.3.2.2,HP-SN-SWITCH-GROUP-MIB::snVLanByProtocolTable,,not-accessible,,mandatory,,.
.1.3.6.1.4.1.11.2.3.7.11.12.1.3.2.2.1,HP-SN-SWITCH-GROUP-MIB::snVLanByProtocolEntry,,not-accessible,snVLanByProtocolVLanId:snVLanByProtocolIndex,mandatory,,An entry in the VLAN By Protocol Configuration table. 
.1.3.6.1.4.1.11.2.3.7.11.12.1.3.2.2.1.1,HP-SN-SWITCH-GROUP-MIB::snVLanByProtocolVLanId,INTEGER,read-only,,mandatory,,The VLAN ID index to both of the VLAN By Port Info Table
.1.3.6.1.4.1.11.2.3.7.11.12.1.3.2.2.1.2,HP-SN-SWITCH-GROUP-MIB::snVLanByProtocolIndex,INTEGER,read-only,,mandatory,ip(1):ipx(2):appleTalk(3):decNet(4):netBios(5):others(6):ipv6(7), The following IP/IPX protocol VLAN types are operated 
.1.3.6.1.4.1.11.2.3.7.11.12.1.3.2.2.1.3,HP-SN-SWITCH-GROUP-MIB::snVLanByProtocolDynamic,INTEGER,read-write,,mandatory,disabled(0):enabled(1), disabled(0) : disabled dynamic port inclusion - applied to switch only.
.1.3.6.1.4.1.11.2.3.7.11.12.1.3.2.2.1.4,HP-SN-SWITCH-GROUP-MIB::snVLanByProtocolStaticMask,INTEGER,read-write,,deprecated,,The Standand-alone switch Protocol VLAN port membership applied in static mode.
.1.3.6.1.4.1.11.2.3.7.11.12.1.3.2.2.1.5,HP-SN-SWITCH-GROUP-MIB::snVLanByProtocolExcludeMask,INTEGER,read-write,,deprecated,,The Standand-alone switch Protocol VLAN port membership applied in exclusive mode.
.1.3.6.1.4.1.11.2.3.7.11.12.1.3.2.2.1.6,HP-SN-SWITCH-GROUP-MIB::snVLanByProtocolRouterIntf,INTEGER,read-write,,mandatory,,Optional: A virtual interface for router to the VLAN -- applied to router only.
.1.3.6.1.4.1.11.2.3.7.11.12.1.3.2.2.1.7,HP-SN-SWITCH-GROUP-MIB::snVLanByProtocolRowStatus,INTEGER,read-write,,mandatory,other(1):valid(2):delete(3):create(4):modify(5),This object is used to create and
.1.3.6.1.4.1.11.2.3.7.11.12.1.3.2.2.1.8,HP-SN-SWITCH-GROUP-MIB::snVLanByProtocolDynamicMask,INTEGER,read-only,,deprecated,,The Standand-alone switch Protocol VLAN active port membership.
.1.3.6.1.4.1.11.2.3.7.11.12.1.3.2.2.1.9,HP-SN-SWITCH-GROUP-MIB::snVLanByProtocolChassisStaticMask,OCTET,read-write,,deprecated,,The Chassis Protocol VLAN port membership applied in static mode.
.1.3.6.1.4.1.11.2.3.7.11.12.1.3.2.2.1.10,HP-SN-SWITCH-GROUP-MIB::snVLanByProtocolChassisExcludeMask,OCTET,read-write,,deprecated,,The Chassis Protocol VLAN port membership applied in exclusive mode.
.1.3.6.1.4.1.11.2.3.7.11.12.1.3.2.2.1.11,HP-SN-SWITCH-GROUP-MIB::snVLanByProtocolChassisDynamicMask,OCTET,read-only,,deprecated,,The Chassis Protocol VLAN active port membership.
.1.3.6.1.4.1.11.2.3.7.11.12.1.3.2.2.1.12,HP-SN-SWITCH-GROUP-MIB::snVLanByProtocolVLanName,OCTET,read-write,,mandatory,,VLAN Community Name string.
.1.3.6.1.4.1.11.2.3.7.11.12.1.3.2.2.1.13,HP-SN-SWITCH-GROUP-MIB::snVLanByProtocolStaticPortList,OCTET,read-write,,mandatory,,A list of port indices which are the configured port
.1.3.6.1.4.1.11.2.3.7.11.12.1.3.2.2.1.14,HP-SN-SWITCH-GROUP-MIB::snVLanByProtocolExcludePortList,OCTET,read-write,,mandatory,,A list of port indices which are the excluded from port
.1.3.6.1.4.1.11.2.3.7.11.12.1.3.2.2.1.15,HP-SN-SWITCH-GROUP-MIB::snVLanByProtocolDynamicPortList,OCTET,read-only,,mandatory,,A list of port indices which are dynamically joining the port
.1.3.6.1.4.1.11.2.3.7.11.12.1.3.2.3,HP-SN-SWITCH-GROUP-MIB::snVLanByIpSubnetTable,,not-accessible,,mandatory,,An entry of the VLAN By IPX Network Number Table.
.1.3.6.1.4.1.11.2.3.7.11.12.1.3.2.3.1,HP-SN-SWITCH-GROUP-MIB::snVLanByIpSubnetEntry,,not-accessible,snVLanByIpSubnetVLanId:snVLanByIpSubnetIpAddress:snVLanByIpSubnetSubnetMask,mandatory,,An entry in the VLAN By IP Subnet Configuration table. 
.1.3.6.1.4.1.11.2.3.7.11.12.1.3.2.3.1.1,HP-SN-SWITCH-GROUP-MIB::snVLanByIpSubnetVLanId,INTEGER,read-only,,mandatory,,The VLAN ID index to both of the VLAN By Port Info Table
.1.3.6.1.4.1.11.2.3.7.11.12.1.3.2.3.1.2,HP-SN-SWITCH-GROUP-MIB::snVLanByIpSubnetIpAddress,IpAddress,read-only,,mandatory,,Subnet IP address.
.1.3.6.1.4.1.11.2.3.7.11.12.1.3.2.3.1.3,HP-SN-SWITCH-GROUP-MIB::snVLanByIpSubnetSubnetMask,IpAddress,read-only,,mandatory,,Subnet mask associated with the Subnet IP address.
.1.3.6.1.4.1.11.2.3.7.11.12.1.3.2.3.1.4,HP-SN-SWITCH-GROUP-MIB::snVLanByIpSubnetDynamic,INTEGER,read-write,,mandatory,disabled(0):enabled(1), disabled(0) : disabled dynamic port inclusion - applied to switch only.
.1.3.6.1.4.1.11.2.3.7.11.12.1.3.2.3.1.5,HP-SN-SWITCH-GROUP-MIB::snVLanByIpSubnetStaticMask,INTEGER,read-write,,deprecated,,The Standand-alone switch VLAN By Subnet port membership applied in static mode.
.1.3.6.1.4.1.11.2.3.7.11.12.1.3.2.3.1.6,HP-SN-SWITCH-GROUP-MIB::snVLanByIpSubnetExcludeMask,INTEGER,read-write,,deprecated,,The Standand-alone switch VLAN By Subnet port membership applied in exclusive mode.
.1.3.6.1.4.1.11.2.3.7.11.12.1.3.2.3.1.7,HP-SN-SWITCH-GROUP-MIB::snVLanByIpSubnetRouterIntf,INTEGER,read-write,,mandatory,,Optional: A virtual interface for router to the VLAN -- applied to router only.
.1.3.6.1.4.1.11.2.3.7.11.12.1.3.2.3.1.8,HP-SN-SWITCH-GROUP-MIB::snVLanByIpSubnetRowStatus,INTEGER,read-write,,mandatory,other(1):valid(2):delete(3):create(4):modify(5),This object is used to create and
.1.3.6.1.4.1.11.2.3.7.11.12.1.3.2.3.1.9,HP-SN-SWITCH-GROUP-MIB::snVLanByIpSubnetDynamicMask,INTEGER,read-only,,deprecated,,The Standand-alone switch VLAN By Subnet active port membership.
.1.3.6.1.4.1.11.2.3.7.11.12.1.3.2.3.1.10,HP-SN-SWITCH-GROUP-MIB::snVLanByIpSubnetChassisStaticMask,OCTET,read-write,,deprecated,,The Chassis VLAN By Subnet port membership applied in static mode.
.1.3.6.1.4.1.11.2.3.7.11.12.1.3.2.3.1.11,HP-SN-SWITCH-GROUP-MIB::snVLanByIpSubnetChassisExcludeMask,OCTET,read-write,,deprecated,,The Chassis VLAN By Subnet port membership applied in exclusive mode.
.1.3.6.1.4.1.11.2.3.7.11.12.1.3.2.3.1.12,HP-SN-SWITCH-GROUP-MIB::snVLanByIpSubnetChassisDynamicMask,OCTET,read-only,,deprecated,,The Chassis VLAN By Subnet active port membership.
.1.3.6.1.4.1.11.2.3.7.11.12.1.3.2.3.1.13,HP-SN-SWITCH-GROUP-MIB::snVLanByIpSubnetVLanName,OCTET,read-write,,mandatory,,VLAN Community Name string.
.1.3.6.1.4.1.11.2.3.7.11.12.1.3.2.3.1.14,HP-SN-SWITCH-GROUP-MIB::snVLanByIpSubnetStaticPortList,OCTET,read-write,,mandatory,,A list of port indices which are the configured port
.1.3.6.1.4.1.11.2.3.7.11.12.1.3.2.3.1.15,HP-SN-SWITCH-GROUP-MIB::snVLanByIpSubnetExcludePortList,OCTET,read-write,,mandatory,,A list of port indices which are the excluded from port
.1.3.6.1.4.1.11.2.3.7.11.12.1.3.2.3.1.16,HP-SN-SWITCH-GROUP-MIB::snVLanByIpSubnetDynamicPortList,OCTET,read-only,,mandatory,,A list of port indices which are dynamically joining the port
.1.3.6.1.4.1.11.2.3.7.11.12.1.3.2.4,HP-SN-SWITCH-GROUP-MIB::snVLanByIpxNetTable,,not-accessible,,mandatory,,An entry of the VLAN By IPX Network Number Table.
.1.3.6.1.4.1.11.2.3.7.11.12.1.3.2.4.1,HP-SN-SWITCH-GROUP-MIB::snVLanByIpxNetEntry,,not-accessible,snVLanByIpxNetVLanId:snVLanByIpxNetNetworkNum:snVLanByIpxNetFrameType,mandatory,,An entry in the VLAN By Ipx Network Number Configuration table. 
.1.3.6.1.4.1.11.2.3.7.11.12.1.3.2.4.1.1,HP-SN-SWITCH-GROUP-MIB::snVLanByIpxNetVLanId,INTEGER,read-only,,mandatory,,The VLAN ID index to both of the VLAN By Port Info Table
.1.3.6.1.4.1.11.2.3.7.11.12.1.3.2.4.1.2,HP-SN-SWITCH-GROUP-MIB::snVLanByIpxNetNetworkNum,OCTET,read-only,,mandatory,,IPX Network Number.
.1.3.6.1.4.1.11.2.3.7.11.12.1.3.2.4.1.3,HP-SN-SWITCH-GROUP-MIB::snVLanByIpxNetFrameType,INTEGER,read-only,,mandatory,notApplicable(0):ipxEthernet8022(1):ipxEthernet8023(2):ipxEthernetII(3):ipxEthernetSnap(4), The following IPX Frame types are operated 
.1.3.6.1.4.1.11.2.3.7.11.12.1.3.2.4.1.4,HP-SN-SWITCH-GROUP-MIB::snVLanByIpxNetDynamic,INTEGER,read-write,,mandatory,disabled(0):enabled(1), disabled(0) : disabled dynamic port inclusion - applied to switch only.
.1.3.6.1.4.1.11.2.3.7.11.12.1.3.2.4.1.5,HP-SN-SWITCH-GROUP-MIB::snVLanByIpxNetStaticMask,INTEGER,read-write,,deprecated,,The VLAN By IPX network port membership applied in static mode.
.1.3.6.1.4.1.11.2.3.7.11.12.1.3.2.4.1.6,HP-SN-SWITCH-GROUP-MIB::snVLanByIpxNetExcludeMask,INTEGER,read-write,,deprecated,,The VLAN By IPX network port membership applied in exclusive mode.
.1.3.6.1.4.1.11.2.3.7.11.12.1.3.2.4.1.7,HP-SN-SWITCH-GROUP-MIB::snVLanByIpxNetRouterIntf,INTEGER,read-write,,mandatory,,Optional: A virtual interface for router to the VLAN -- applied to router only.
.1.3.6.1.4.1.11.2.3.7.11.12.1.3.2.4.1.8,HP-SN-SWITCH-GROUP-MIB::snVLanByIpxNetRowStatus,INTEGER,read-write,,mandatory,other(1):valid(2):delete(3):create(4):modify(5),This object is used to create and
.1.3.6.1.4.1.11.2.3.7.11.12.1.3.2.4.1.9,HP-SN-SWITCH-GROUP-MIB::snVLanByIpxNetDynamicMask,INTEGER,read-only,,deprecated,,The VLAN By IPX network active port membership.
.1.3.6.1.4.1.11.2.3.7.11.12.1.3.2.4.1.10,HP-SN-SWITCH-GROUP-MIB::snVLanByIpxNetChassisStaticMask,OCTET,read-write,,deprecated,,The Chassis VLAN By IPX network port membership applied in static mode.
.1.3.6.1.4.1.11.2.3.7.11.12.1.3.2.4.1.11,HP-SN-SWITCH-GROUP-MIB::snVLanByIpxNetChassisExcludeMask,OCTET,read-write,,deprecated,,The Chassis VLAN By IPX network port membership applied in exclusive mode.
.1.3.6.1.4.1.11.2.3.7.11.12.1.3.2.4.1.12,HP-SN-SWITCH-GROUP-MIB::snVLanByIpxNetChassisDynamicMask,OCTET,read-only,,deprecated,,The Chassis VLAN By IPX network active port membership.
.1.3.6.1.4.1.11.2.3.7.11.12.1.3.2.4.1.13,HP-SN-SWITCH-GROUP-MIB::snVLanByIpxNetVLanName,OCTET,read-write,,mandatory,,VLAN Community Name string.
.1.3.6.1.4.1.11.2.3.7.11.12.1.3.2.4.1.14,HP-SN-SWITCH-GROUP-MIB::snVLanByIpxNetStaticPortList,OCTET,read-write,,mandatory,,A list of port indices which are the configured port
.1.3.6.1.4.1.11.2.3.7.11.12.1.3.2.4.1.15,HP-SN-SWITCH-GROUP-MIB::snVLanByIpxNetExcludePortList,OCTET,read-write,,mandatory,,A list of port indices which are the excluded from port
.1.3.6.1.4.1.11.2.3.7.11.12.1.3.2.4.1.16,HP-SN-SWITCH-GROUP-MIB::snVLanByIpxNetDynamicPortList,OCTET,read-only,,mandatory,,A list of port indices which are dynamically joining the port
.1.3.6.1.4.1.11.2.3.7.11.12.1.3.2.5,HP-SN-SWITCH-GROUP-MIB::snVLanByATCableTable,,not-accessible,,mandatory,,A Table Of VLAN By AppleTalk Network Number.
.1.3.6.1.4.1.11.2.3.7.11.12.1.3.2.5.1,HP-SN-SWITCH-GROUP-MIB::snVLanByATCableEntry,,not-accessible,snVLanByATCableVLanId:snVLanByATCableIndex,mandatory,,An entry of the AppleTalk Cable VLAN table.
.1.3.6.1.4.1.11.2.3.7.11.12.1.3.2.5.1.1,HP-SN-SWITCH-GROUP-MIB::snVLanByATCableVLanId,INTEGER,read-only,,mandatory,,The VLAN ID of a PORT VLAN of which the AppleTalk Cable
.1.3.6.1.4.1.11.2.3.7.11.12.1.3.2.5.1.2,HP-SN-SWITCH-GROUP-MIB::snVLanByATCableIndex,INTEGER,read-only,,mandatory,,AppleTalk Cable VLAN index number.
.1.3.6.1.4.1.11.2.3.7.11.12.1.3.2.5.1.3,HP-SN-SWITCH-GROUP-MIB::snVLanByATCableRouterIntf,INTEGER,read-write,,mandatory,,A virtual router interface to the AppleTalk Cable VLAN,
.1.3.6.1.4.1.11.2.3.7.11.12.1.3.2.5.1.4,HP-SN-SWITCH-GROUP-MIB::snVLanByATCableRowStatus,INTEGER,read-write,,mandatory,other(1):valid(2):delete(3):create(4):modify(5),This object is used to create and
.1.3.6.1.4.1.11.2.3.7.11.12.1.3.2.5.1.5,HP-SN-SWITCH-GROUP-MIB::snVLanByATCableChassisStaticMask,OCTET,read-write,,deprecated,,A list of ports which are statically configured to
.1.3.6.1.4.1.11.2.3.7.11.12.1.3.2.5.1.6,HP-SN-SWITCH-GROUP-MIB::snVLanByATCableVLanName,OCTET,read-write,,mandatory,,VLAN Name string.
.1.3.6.1.4.1.11.2.3.7.11.12.1.3.2.5.1.7,HP-SN-SWITCH-GROUP-MIB::snVLanByATCableStaticPortList,OCTET,read-write,,mandatory,,A list of port indices which are the configured port
.1.3.6.1.4.1.11.2.3.7.11.12.1.3.2.6,HP-SN-SWITCH-GROUP-MIB::snVLanByPortMemberTable,,not-accessible,,mandatory,,Port VLAN (Layer 2 VLAN) port membership table.
.1.3.6.1.4.1.11.2.3.7.11.12.1.3.2.6.1,HP-SN-SWITCH-GROUP-MIB::snVLanByPortMemberEntry,,not-accessible,snVLanByPortMemberVLanId:snVLanByPortMemberPortId,mandatory,,An entry of the port VLAN membership table.
.1.3.6.1.4.1.11.2.3.7.11.12.1.3.2.6.1.1,HP-SN-SWITCH-GROUP-MIB::snVLanByPortMemberVLanId,INTEGER,read-only,,mandatory,,The VLAN identifier (VLAN ID).
.1.3.6.1.4.1.11.2.3.7.11.12.1.3.2.6.1.2,HP-SN-SWITCH-GROUP-MIB::snVLanByPortMemberPortId,INTEGER,read-only,,mandatory,,The ifIndex which is a member of the port VLAN.
.1.3.6.1.4.1.11.2.3.7.11.12.1.3.2.6.1.3,HP-SN-SWITCH-GROUP-MIB::snVLanByPortMemberRowStatus,INTEGER,read-write,,mandatory,other(1):valid(2):delete(3):create(4),This object is used to create and
.1.3.6.1.4.1.11.2.3.7.11.12.1.3.2.7,HP-SN-SWITCH-GROUP-MIB::snVLanByPortCfgTable,,not-accessible,,mandatory,,Port VLAN (Layer 2 VLAN) configuration table.
.1.3.6.1.4.1.11.2.3.7.11.12.1.3.2.7.1,HP-SN-SWITCH-GROUP-MIB::snVLanByPortCfgEntry,,not-accessible,snVLanByPortCfgVLanId,mandatory,,An entry of the port VLAN configuration table.
.1.3.6.1.4.1.11.2.3.7.11.12.1.3.2.7.1.1,HP-SN-SWITCH-GROUP-MIB::snVLanByPortCfgVLanId,INTEGER,read-only,,mandatory,,The VLAN identifier (VLAN ID).
.1.3.6.1.4.1.11.2.3.7.11.12.1.3.2.7.1.2,HP-SN-SWITCH-GROUP-MIB::snVLanByPortCfgQos,INTEGER,read-write,,mandatory,level0(0):level1(1):level2(2):level3(3):level4(4):level5(5):level6(6):level7(7),The Stand alone stackable switch VLAN Priority values are:
.1.3.6.1.4.1.11.2.3.7.11.12.1.3.2.7.1.3,HP-SN-SWITCH-GROUP-MIB::snVLanByPortCfgStpMode,INTEGER,read-write,,mandatory,disabled(0):enabled(1),Spanning Tree Mode in the Switch Group can be set
.1.3.6.1.4.1.11.2.3.7.11.12.1.3.2.7.1.4,HP-SN-SWITCH-GROUP-MIB::snVLanByPortCfgStpPriority,INTEGER,read-write,,mandatory,,dot1dStpPriority : The value of the write-able 
.1.3.6.1.4.1.11.2.3.7.11.12.1.3.2.7.1.5,HP-SN-SWITCH-GROUP-MIB::snVLanByPortCfgStpGroupMaxAge,INTEGER,read-write,,mandatory,,dot1dStpBridgeMaxAge: From RFC1493(Bridge MIB). The value that all bridges use for MaxAge when  this bridge is acting as the root.  Note that 802.1D-1990 specifies that the  range for this parameter is related to the value of dot1dStpBridgeHelloTime. The granularity of this timer is specified by 802.1D-1990 to be 1 second. An agent may return a badValue error if a set is attempted to a value which is not a whole number of seconds.
.1.3.6.1.4.1.11.2.3.7.11.12.1.3.2.7.1.6,HP-SN-SWITCH-GROUP-MIB::snVLanByPortCfgStpGroupHelloTime,INTEGER,read-write,,mandatory,,dot1dStpBridgeHelloTime: From RFC1493(Bridge MIB). The value that all bridges use for HelloTime when this bridge is acting as the root. The granularity of this timer is specified by 802.1D- 1990 to be 1 second. An agent may return a badValue error if a set is attempted to a value which is not a whole number of seconds.
.1.3.6.1.4.1.11.2.3.7.11.12.1.3.2.7.1.7,HP-SN-SWITCH-GROUP-MIB::snVLanByPortCfgStpGroupForwardDelay,INTEGER,read-write,,mandatory,,dot1dStpBridgeForwardDelay : From RFC1493(Bridge MIB). The value that all bridges use for ForwardDelay when this bridge is acting as the root. Note that 802.1D-1990 specifies that the range for this parameter is related to the value of dot1dStpBridgeMaxAge. The granularity of this timer is specified by 802.1D-1990 to be 1 second. An agent may return a badValue error if a set is attempted to a value which is not a whole number of seconds.
.1.3.6.1.4.1.11.2.3.7.11.12.1.3.2.7.1.8,HP-SN-SWITCH-GROUP-MIB::snVLanByPortCfgBaseNumPorts,INTEGER,read-only,,mandatory,,The number of ports controlled by this bridging entity.
.1.3.6.1.4.1.11.2.3.7.11.12.1.3.2.7.1.9,HP-SN-SWITCH-GROUP-MIB::snVLanByPortCfgBaseType,INTEGER,read-only,,mandatory,unknown(1):transparent-only(2):sourceroute-only(3):srt(4),Indicates what type of bridging this bridge can perform. If a bridge is actually performing a certain type of bridging this will be indicated by entries in the port table for the given type.
.1.3.6.1.4.1.11.2.3.7.11.12.1.3.2.7.1.10,HP-SN-SWITCH-GROUP-MIB::snVLanByPortCfgStpProtocolSpecification,INTEGER,read-only,,mandatory,unknown(1):decLb100(2):ieee8021d(3),An indication of what version of the Spanning Tree Protocol is being run. The value 'decLb100(2)' indicates the DEC LANbridge 100 Spanning Tree protocol. IEEE 802.1d implementations will return 'ieee8021d(3)'. If future versions of the IEEE Spanning Tree Protocol are released that are incompatible with the current version a new value will be defined.
.1.3.6.1.4.1.11.2.3.7.11.12.1.3.2.7.1.11,HP-SN-SWITCH-GROUP-MIB::snVLanByPortCfgStpMaxAge,INTEGER,read-only,,mandatory,,dot1dStpMaxAge: From RFC1493(Bridge MIB). The maximum age of Spanning Tree Protocol information learned from the network on any port before it is discarded, in units of hundredths of a second. This is the actual value that this bridge is currently using.
.1.3.6.1.4.1.11.2.3.7.11.12.1.3.2.7.1.12,HP-SN-SWITCH-GROUP-MIB::snVLanByPortCfgStpHelloTime,INTEGER,read-only,,mandatory,,dot1dStpHelloTime: From RFC1493(Bridge MIB). The amount of time between the transmission of Configuration bridge PDUs by this node on any port when it is the root of the spanning tree or trying to become so, in units of hundredths of a second. This is the actual value that this bridge is currently using.
.1.3.6.1.4.1.11.2.3.7.11.12.1.3.2.7.1.13,HP-SN-SWITCH-GROUP-MIB::snVLanByPortCfgStpHoldTime,INTEGER,read-only,,mandatory,,dot1dStpHoldTime: From RFC1493(Bridge MIB). This time value determines the interval length during which no more than two Configuration bridge PDUs shall be transmitted by this node, in units of hundredths of a second.
.1.3.6.1.4.1.11.2.3.7.11.12.1.3.2.7.1.14,HP-SN-SWITCH-GROUP-MIB::snVLanByPortCfgStpForwardDelay,INTEGER,read-only,,mandatory,,dot1dStpForwardDelay: From RFC1493(Bridge MIB). This time value, measured in units of hundredths of a second, controls how fast a port changes its spanning state when moving towards the Forwarding state. The value determines how long the port stays in each of the Listening and Learning states, which precede the Forwarding state. This value is also used, when a topology change has been detected and is underway, to age all dynamic entries in the Forwarding Database. [Note that this value is the one that this bridge is currently using, in contrast to dot1dStpBridgeForwardDelay which is the value that this bridge and all others would start using if/when this bridge were to become the root.]
.1.3.6.1.4.1.11.2.3.7.11.12.1.3.2.7.1.15,HP-SN-SWITCH-GROUP-MIB::snVLanByPortCfgStpTimeSinceTopologyChange,TimeTicks,read-only,,mandatory,,The time (in hundredths of a second) since the last time a topology change was detected by the bridge entity.
.1.3.6.1.4.1.11.2.3.7.11.12.1.3.2.7.1.16,HP-SN-SWITCH-GROUP-MIB::snVLanByPortCfgStpTopChanges,Counter32,read-only,,mandatory,,The total number of topology changes detected by this bridge since the management entity was last reset or initialized.
.1.3.6.1.4.1.11.2.3.7.11.12.1.3.2.7.1.17,HP-SN-SWITCH-GROUP-MIB::snVLanByPortCfgStpRootCost,INTEGER,read-only,,mandatory,,dot1dStpRootCost: From RFC1493(Bridge MIB).  The cost of the path to the root as seen from this bridge.
.1.3.6.1.4.1.11.2.3.7.11.12.1.3.2.7.1.18,HP-SN-SWITCH-GROUP-MIB::snVLanByPortCfgStpRootPort,INTEGER,read-only,,mandatory,,dot1dStpRootPort: From RFC1493(Bridge MIB). The port number of the port which offers the lowest cost path from this bridge to the root bridge.
.1.3.6.1.4.1.11.2.3.7.11.12.1.3.2.7.1.19,HP-SN-SWITCH-GROUP-MIB::snVLanByPortCfgStpDesignatedRoot,OCTET,read-only,,mandatory,,dot1dStpDesignatedRoot: From RFC1493(Bridge MIB). The bridge identifier of the root of the spanning tree as determined by the Spanning Tree Protocol as executed by this node. This value is used as the Root Identifier parameter in all Configuration Bridge PDUs originated by this node.
.1.3.6.1.4.1.11.2.3.7.11.12.1.3.2.7.1.20,HP-SN-SWITCH-GROUP-MIB::snVLanByPortCfgBaseBridgeAddress,OCTET,read-only,,mandatory,,The MAC address used by this bridge when it must be referred to in a unique fashion. It is recommended that this be the numerically smallest MAC address of all ports that belong to this bridge. However it is only required to be unique. When concatenated with dot1dStpPriority a unique BridgeIdentifier is formed which is used in the Spanning Tree Protocol.
.1.3.6.1.4.1.11.2.3.7.11.12.1.3.2.7.1.21,HP-SN-SWITCH-GROUP-MIB::snVLanByPortCfgVLanName,OCTET,read-write,,mandatory,,VLAN Community Name string.
.1.3.6.1.4.1.11.2.3.7.11.12.1.3.2.7.1.22,HP-SN-SWITCH-GROUP-MIB::snVLanByPortCfgRouterIntf,INTEGER,read-write,,mandatory,,Optional: A virtual interface for router to the VLAN -- applied to router only.
.1.3.6.1.4.1.11.2.3.7.11.12.1.3.2.7.1.23,HP-SN-SWITCH-GROUP-MIB::snVLanByPortCfgRowStatus,INTEGER,read-write,,mandatory,other(1):valid(2):delete(3),Use object to delete a vlan entry.
.1.3.6.1.4.1.11.2.3.7.11.12.1.3.3,HP-SN-SWITCH-GROUP-MIB::snSwPortInfo,,,,,,
.1.3.6.1.4.1.11.2.3.7.11.12.1.3.3.1,HP-SN-SWITCH-GROUP-MIB::snSwPortInfoTable,,not-accessible,,mandatory,,A specific snSwPortInfo group consists of a number of 
.1.3.6.1.4.1.11.2.3.7.11.12.1.3.3.1.1,HP-SN-SWITCH-GROUP-MIB::snSwPortInfoEntry,,not-accessible,snSwPortInfoPortNum,mandatory,,An entry in the snSwPortInfo table indicates the 
.1.3.6.1.4.1.11.2.3.7.11.12.1.3.3.1.1.1,HP-SN-SWITCH-GROUP-MIB::snSwPortInfoPortNum,INTEGER,read-only,,mandatory,,The port index.
.1.3.6.1.4.1.11.2.3.7.11.12.1.3.3.1.1.2,HP-SN-SWITCH-GROUP-MIB::snSwPortInfoMonitorMode,INTEGER,read-write,,mandatory,disabled(0):input(1):output(2):both(3),A monitoring port is selected and its traffic will be
.1.3.6.1.4.1.11.2.3.7.11.12.1.3.3.1.1.3,HP-SN-SWITCH-GROUP-MIB::snSwPortInfoTagMode,INTEGER,read-write,,mandatory,tagged(1):untagged(2):auto(3):disabled(4),For tagged port, we could have multiple VLANs 
.1.3.6.1.4.1.11.2.3.7.11.12.1.3.3.1.1.4,HP-SN-SWITCH-GROUP-MIB::snSwPortInfoChnMode,INTEGER,read-write,,mandatory,none(0):halfDuplex(1):fullDuplex(2),The port can be configured to operate in either none(0).........link down or port disabled.
.1.3.6.1.4.1.11.2.3.7.11.12.1.3.3.1.1.5,HP-SN-SWITCH-GROUP-MIB::snSwPortInfoSpeed,INTEGER,read-write,,mandatory,none(0):sAutoSense(1):s10M(2):s100M(3):s1G(4):s45M(5):s155M(6):s10G(7),The speed configuration for a port. The values are: none(0)..........link down or no traffic. The read-back hardware status are the following: none(0)..........link down or no traffic.
.1.3.6.1.4.1.11.2.3.7.11.12.1.3.3.1.1.6,HP-SN-SWITCH-GROUP-MIB::snSwPortInfoMediaType,INTEGER,read-only,,mandatory,other(1):m100BaseTX(2):m100BaseFX(3):m1000BaseFX(4):mT3(5):m155ATM(6):m1000BaseTX(7):m622ATM(8):m155POS(9):m622POS(10):m2488POS(11):m10000BaseFX(12),The media type for the port. The
.1.3.6.1.4.1.11.2.3.7.11.12.1.3.3.1.1.7,HP-SN-SWITCH-GROUP-MIB::snSwPortInfoConnectorType,INTEGER,read-only,,mandatory,other(1):copper(2):fiber(3),The type of connector that the port offers.
.1.3.6.1.4.1.11.2.3.7.11.12.1.3.3.1.1.8,HP-SN-SWITCH-GROUP-MIB::snSwPortInfoAdminStatus,INTEGER,read-write,,mandatory,up(1):down(2):testing(3),The desired state of all ports. The
.1.3.6.1.4.1.11.2.3.7.11.12.1.3.3.1.1.9,HP-SN-SWITCH-GROUP-MIB::snSwPortInfoLinkStatus,INTEGER,read-only,,mandatory,up(1):down(2):testing(3),The current operational state of the interface. The testing(3) state indicates that no operational packets can be passed.  (same as ifOperStatus in MIB-II)
.1.3.6.1.4.1.11.2.3.7.11.12.1.3.3.1.1.10,HP-SN-SWITCH-GROUP-MIB::snSwPortInfoPortQos,INTEGER,read-write,,mandatory,level0(0):level1(1):level2(2):level3(3):level4(4):level5(5):level6(6):level7(7),The Stand alone stackable switch Port Qos Priority values are:
.1.3.6.1.4.1.11.2.3.7.11.12.1.3.3.1.1.11,HP-SN-SWITCH-GROUP-MIB::snSwPortInfoPhysAddress,OCTET,read-only,,mandatory,,The port physical address. The physical address 
.1.3.6.1.4.1.11.2.3.7.11.12.1.3.3.1.1.12,HP-SN-SWITCH-GROUP-MIB::snSwPortStatsInFrames,Counter32,read-only,,mandatory,,The total number of packets received on the interface.
.1.3.6.1.4.1.11.2.3.7.11.12.1.3.3.1.1.13,HP-SN-SWITCH-GROUP-MIB::snSwPortStatsOutFrames,Counter32,read-only,,mandatory,,The total number of packets transmitted out of the interface.
.1.3.6.1.4.1.11.2.3.7.11.12.1.3.3.1.1.14,HP-SN-SWITCH-GROUP-MIB::snSwPortStatsAlignErrors,Counter32,read-only,,mandatory,,dot3StatsAlignmentErrors : A count of frames 
.1.3.6.1.4.1.11.2.3.7.11.12.1.3.3.1.1.15,HP-SN-SWITCH-GROUP-MIB::snSwPortStatsFCSErrors,Counter32,read-only,,mandatory,,dot3StatsFCSErrors : A count of frames received 
.1.3.6.1.4.1.11.2.3.7.11.12.1.3.3.1.1.16,HP-SN-SWITCH-GROUP-MIB::snSwPortStatsMultiColliFrames,Counter32,read-only,,mandatory,,dot3StatsMultipleCollisionFrames : 
.1.3.6.1.4.1.11.2.3.7.11.12.1.3.3.1.1.17,HP-SN-SWITCH-GROUP-MIB::snSwPortStatsFrameTooLongs,Counter32,read-only,,mandatory,,dot3StatsFrameTooLongs : A count of frames 
.1.3.6.1.4.1.11.2.3.7.11.12.1.3.3.1.1.18,HP-SN-SWITCH-GROUP-MIB::snSwPortStatsTxColliFrames,Counter32,read-only,,mandatory,,A count of successfully transmitted frames on
.1.3.6.1.4.1.11.2.3.7.11.12.1.3.3.1.1.19,HP-SN-SWITCH-GROUP-MIB::snSwPortStatsRxColliFrames,Counter32,read-only,,mandatory,,A count of successfully received frames on
.1.3.6.1.4.1.11.2.3.7.11.12.1.3.3.1.1.20,HP-SN-SWITCH-GROUP-MIB::snSwPortStatsFrameTooShorts,Counter32,read-only,,mandatory,, A count of frames received on a particular 
.1.3.6.1.4.1.11.2.3.7.11.12.1.3.3.1.1.21,HP-SN-SWITCH-GROUP-MIB::snSwPortLockAddressCount,INTEGER,read-write,,mandatory,,The number of source MAC addresses are allowed
.1.3.6.1.4.1.11.2.3.7.11.12.1.3.3.1.1.22,HP-SN-SWITCH-GROUP-MIB::snSwPortStpPortEnable,INTEGER,read-write,,mandatory,disabled(0):enabled(1),The enabled/disabled status of the port.
.1.3.6.1.4.1.11.2.3.7.11.12.1.3.3.1.1.23,HP-SN-SWITCH-GROUP-MIB::snSwPortDhcpGateListId,INTEGER,read-write,,mandatory,,The ID for a DHCP gateway list entry relative 
.1.3.6.1.4.1.11.2.3.7.11.12.1.3.3.1.1.24,HP-SN-SWITCH-GROUP-MIB::snSwPortName,OCTET,read-write,,mandatory,,Port Name string.
.1.3.6.1.4.1.11.2.3.7.11.12.1.3.3.1.1.25,HP-SN-SWITCH-GROUP-MIB::snSwPortStatsInBcastFrames,Counter32,read-only,,mandatory,,The total number of broadcast packets received on the interface.
.1.3.6.1.4.1.11.2.3.7.11.12.1.3.3.1.1.26,HP-SN-SWITCH-GROUP-MIB::snSwPortStatsOutBcastFrames,Counter32,read-only,,mandatory,,The total number of broadcast packets transmitted out of the interface.
.1.3.6.1.4.1.11.2.3.7.11.12.1.3.3.1.1.27,HP-SN-SWITCH-GROUP-MIB::snSwPortStatsInMcastFrames,Counter32,read-only,,mandatory,,The total number of multicast packets received on the interface.
.1.3.6.1.4.1.11.2.3.7.11.12.1.3.3.1.1.28,HP-SN-SWITCH-GROUP-MIB::snSwPortStatsOutMcastFrames,Counter32,read-only,,mandatory,,The total number of multicast packets transmitted out of the interface.
.1.3.6.1.4.1.11.2.3.7.11.12.1.3.3.1.1.29,HP-SN-SWITCH-GROUP-MIB::snSwPortStatsInDiscard,Counter32,read-only,,mandatory,,The number of inbound packets which were chosen to be discarded even though no errors had been detected to prevent their being deliverable to a higher-layer protocol. One possible reason for discarding such a packet could be to free up buffer space.
.1.3.6.1.4.1.11.2.3.7.11.12.1.3.3.1.1.30,HP-SN-SWITCH-GROUP-MIB::snSwPortStatsOutDiscard,Counter32,read-only,,mandatory,,The number of outbound packets which were chosen to be discarded even though no errors had been detected to prevent their being transmitted. One possible reason for discarding such a packet could be to free up buffer space.
.1.3.6.1.4.1.11.2.3.7.11.12.1.3.3.1.1.31,HP-SN-SWITCH-GROUP-MIB::snSwPortStatsMacStations,INTEGER,read-only,,mandatory,,The total number of MAC Stations connected to the interface.
.1.3.6.1.4.1.11.2.3.7.11.12.1.3.3.1.1.32,HP-SN-SWITCH-GROUP-MIB::snSwPortCacheGroupId,INTEGER,read-write,,mandatory,,Cache Group ID for the interface.
.1.3.6.1.4.1.11.2.3.7.11.12.1.3.3.1.1.33,HP-SN-SWITCH-GROUP-MIB::snSwPortTransGroupId,INTEGER,read-write,,mandatory,,Transparent Group ID for the interface.
.1.3.6.1.4.1.11.2.3.7.11.12.1.3.3.1.1.34,HP-SN-SWITCH-GROUP-MIB::snSwPortInfoAutoNegotiate,INTEGER,read-write,,mandatory,disabled(0):enabled(1):negFullAuto(2):global(3):other(4),This feature only applies to Gigabit Ethernet ports. If set to
.1.3.6.1.4.1.11.2.3.7.11.12.1.3.3.1.1.35,HP-SN-SWITCH-GROUP-MIB::snSwPortInfoFlowControl,INTEGER,read-write,,mandatory,disabled(0):enabled(1),Enable/Disbale port flow control.
.1.3.6.1.4.1.11.2.3.7.11.12.1.3.3.1.1.36,HP-SN-SWITCH-GROUP-MIB::snSwPortInfoGigType,INTEGER,read-only,,mandatory,m1000BaseSX(0):m1000BaseLX(1):m1000BaseLH(2):m1000BaseLHA(3):m1000BaseLHB(4):m1000BaseTX(5):m10000BaseSR(6):m10000BaseLR(7):m10000BaseER(8):notApplicable(255),The media type for the port. The
.1.3.6.1.4.1.11.2.3.7.11.12.1.3.3.1.1.37,HP-SN-SWITCH-GROUP-MIB::snSwPortStatsLinkChange,Counter32,read-only,,mandatory,,The total number of link state change of the interface.
.1.3.6.1.4.1.11.2.3.7.11.12.1.3.3.1.1.38,HP-SN-SWITCH-GROUP-MIB::snSwPortIfIndex,INTEGER,read-only,,mandatory,,In order to identify a particular interface, this
.1.3.6.1.4.1.11.2.3.7.11.12.1.3.3.1.1.39,HP-SN-SWITCH-GROUP-MIB::snSwPortDescr,OCTET,read-only,,mandatory,,A textual string containing the slot/port information about the interface.
.1.3.6.1.4.1.11.2.3.7.11.12.1.3.3.1.1.40,HP-SN-SWITCH-GROUP-MIB::snSwPortInOctets,OCTET,read-only,,mandatory,,The total number of octets received on the interface, including framing characters. This object is a 64-bit
.1.3.6.1.4.1.11.2.3.7.11.12.1.3.3.1.1.41,HP-SN-SWITCH-GROUP-MIB::snSwPortOutOctets,OCTET,read-only,,mandatory,,The total number of octets transmitted out of the interface, including framing characters. This object is a 64-bit
.1.3.6.1.4.1.11.2.3.7.11.12.1.3.3.1.1.42,HP-SN-SWITCH-GROUP-MIB::snSwPortStatsInBitsPerSec,Gauge32,read-only,,mandatory,,The number of bits per second received on the interface over a 5 minutes interval.
.1.3.6.1.4.1.11.2.3.7.11.12.1.3.3.1.1.43,HP-SN-SWITCH-GROUP-MIB::snSwPortStatsOutBitsPerSec,Gauge32,read-only,,mandatory,,The number of bits per second transmitted out of the interface over a 5 minutes interval.
.1.3.6.1.4.1.11.2.3.7.11.12.1.3.3.1.1.44,HP-SN-SWITCH-GROUP-MIB::snSwPortStatsInPktsPerSec,Gauge32,read-only,,mandatory,,The number of packets per second received on the interface over a 5 minutes interval.
.1.3.6.1.4.1.11.2.3.7.11.12.1.3.3.1.1.45,HP-SN-SWITCH-GROUP-MIB::snSwPortStatsOutPktsPerSec,Gauge32,read-only,,mandatory,,The number of packets per second transmitted out of the interface over a 5 minutes interval.
.1.3.6.1.4.1.11.2.3.7.11.12.1.3.3.1.1.46,HP-SN-SWITCH-GROUP-MIB::snSwPortStatsInUtilization,INTEGER,read-only,,mandatory,,The input network utilization in hundredths of a percent over a 5 minutes interval.
.1.3.6.1.4.1.11.2.3.7.11.12.1.3.3.1.1.47,HP-SN-SWITCH-GROUP-MIB::snSwPortStatsOutUtilization,INTEGER,read-only,,mandatory,,The output network utilization in hundredths of a percent over a 5 minutes interval.
.1.3.6.1.4.1.11.2.3.7.11.12.1.3.3.1.1.48,HP-SN-SWITCH-GROUP-MIB::snSwPortFastSpanPortEnable,INTEGER,read-write,,mandatory,disabled(0):enabled(1),The enabled/disabled fast span port status of the port.
.1.3.6.1.4.1.11.2.3.7.11.12.1.3.3.1.1.49,HP-SN-SWITCH-GROUP-MIB::snSwPortFastSpanUplinkEnable,INTEGER,read-write,,mandatory,disabled(0):enabled(1),The enabled/disabled fast span uplink status of the port.
.1.3.6.1.4.1.11.2.3.7.11.12.1.3.3.1.1.50,HP-SN-SWITCH-GROUP-MIB::snSwPortVlanId,INTEGER,read-write,,mandatory,,The ID of a VLAN of which this port is a member. Port must be untagged. For tagged port which belongs to multiple VLANs, this object return 0 which is an invalid VLAN ID value.
.1.3.6.1.4.1.11.2.3.7.11.12.1.3.3.1.1.51,HP-SN-SWITCH-GROUP-MIB::snSwPortRouteOnly,INTEGER,read-write,,mandatory,disabled(0):enabled(1),Enable/Disable L2 switching of a routing switch port.
.1.3.6.1.4.1.11.2.3.7.11.12.1.3.3.1.1.52,HP-SN-SWITCH-GROUP-MIB::snSwPortPresent,INTEGER,read-only,,mandatory,false(0):true(1),Indicate if the port is absent or present.
.1.3.6.1.4.1.11.2.3.7.11.12.1.3.3.1.1.53,HP-SN-SWITCH-GROUP-MIB::snSwPortGBICStatus,INTEGER,read-only,,mandatory,gbic(1):miniGBIC(2):empty(3):other(4),Indicate if the gig port has GBICs on them.
.1.3.6.1.4.1.11.2.3.7.11.12.1.3.3.1.1.54,HP-SN-SWITCH-GROUP-MIB::snSwPortStatsInKiloBitsPerSec,Unsigned32,read-only,,mandatory,,Bit rate in kilobits per second received on the 10G and faster interface over a 5 minutes interval.
.1.3.6.1.4.1.11.2.3.7.11.12.1.3.3.1.1.55,HP-SN-SWITCH-GROUP-MIB::snSwPortStatsOutKiloBitsPerSec,Unsigned32,read-only,,mandatory,,Bit rate in kilobits per second transmitted out of the 10G and faster interface over a 5 minutes interval.
.1.3.6.1.4.1.11.2.3.7.11.12.1.3.3.1.1.56,HP-SN-SWITCH-GROUP-MIB::snSwPortLoadInterval,INTEGER,read-write,,mandatory,,The time in seconds for which average port utilization should be carried out. The value should be incremental of 30 seconds, between the ranges specified.
.1.3.6.1.4.1.11.2.3.7.11.12.1.3.3.1.1.57,HP-SN-SWITCH-GROUP-MIB::snSwPortTagType,INTEGER,read-write,,mandatory,,The IEEE802.1q tag type embedded in the length/type field of
.1.3.6.1.4.1.11.2.3.7.11.12.1.3.3.2,HP-SN-SWITCH-GROUP-MIB::snInterfaceId,,,,,,
.1.3.6.1.4.1.11.2.3.7.11.12.1.3.3.3,HP-SN-SWITCH-GROUP-MIB::snInterfaceLookupTable,,not-accessible,,mandatory,,
.1.3.6.1.4.1.11.2.3.7.11.12.1.3.3.3.1,HP-SN-SWITCH-GROUP-MIB::snInterfaceLookupEntry,,not-accessible,snInterfaceLookupInterfaceId,mandatory,,
.1.3.6.1.4.1.11.2.3.7.11.12.1.3.3.3.1.1,HP-SN-SWITCH-GROUP-MIB::snInterfaceLookupInterfaceId,OBJECT,read-only,,mandatory,,
.1.3.6.1.4.1.11.2.3.7.11.12.1.3.3.3.1.2,HP-SN-SWITCH-GROUP-MIB::snInterfaceLookupIfIndex,INTEGER,read-only,,mandatory,,
.1.3.6.1.4.1.11.2.3.7.11.12.1.3.3.4,HP-SN-SWITCH-GROUP-MIB::snIfIndexLookupTable,,not-accessible,,mandatory,,
.1.3.6.1.4.1.11.2.3.7.11.12.1.3.3.4.1,HP-SN-SWITCH-GROUP-MIB::snIfIndexLookupEntry,,not-accessible,snIfIndexLookupIfIndex,mandatory,,
.1.3.6.1.4.1.11.2.3.7.11.12.1.3.3.4.1.1,HP-SN-SWITCH-GROUP-MIB::snIfIndexLookupIfIndex,INTEGER,read-only,,mandatory,,
.1.3.6.1.4.1.11.2.3.7.11.12.1.3.3.4.1.2,HP-SN-SWITCH-GROUP-MIB::snIfIndexLookupInterfaceId,OBJECT,read-only,,mandatory,,
.1.3.6.1.4.1.11.2.3.7.11.12.1.3.4,HP-SN-SWITCH-GROUP-MIB::snFdbInfo,,,,,,
.1.3.6.1.4.1.11.2.3.7.11.12.1.3.4.1,HP-SN-SWITCH-GROUP-MIB::snFdbTable,,not-accessible,,mandatory,,This table contains snFdb information for each station
.1.3.6.1.4.1.11.2.3.7.11.12.1.3.4.1.1,HP-SN-SWITCH-GROUP-MIB::snFdbEntry,,not-accessible,snFdbStationIndex,mandatory,,Each entry represents the information of a static MAC station.
.1.3.6.1.4.1.11.2.3.7.11.12.1.3.4.1.1.1,HP-SN-SWITCH-GROUP-MIB::snFdbStationIndex,INTEGER,read-only,,mandatory,,The FDB Station index to the Fdb Station Table.
.1.3.6.1.4.1.11.2.3.7.11.12.1.3.4.1.1.2,HP-SN-SWITCH-GROUP-MIB::snFdbStationAddr,OCTET,read-write,,mandatory,,The snFdbs physical address. The physical address 
.1.3.6.1.4.1.11.2.3.7.11.12.1.3.4.1.1.3,HP-SN-SWITCH-GROUP-MIB::snFdbStationPort,INTEGER,read-write,,mandatory,,Station slot/port number. 
.1.3.6.1.4.1.11.2.3.7.11.12.1.3.4.1.1.4,HP-SN-SWITCH-GROUP-MIB::snFdbVLanId,INTEGER,read-write,,mandatory,,The Station VLan ID.
.1.3.6.1.4.1.11.2.3.7.11.12.1.3.4.1.1.5,HP-SN-SWITCH-GROUP-MIB::snFdbStationQos,INTEGER,read-write,,mandatory,level0(0):level1(1):level2(2):level3(3):level4(4):level5(5):level6(6):level7(7),The Stand alone stackable station Qos Priority values are:
.1.3.6.1.4.1.11.2.3.7.11.12.1.3.4.1.1.6,HP-SN-SWITCH-GROUP-MIB::snFdbStationType,INTEGER,read-write,,mandatory,notSupported(0):host(1):router(2),The station type values are:
.1.3.6.1.4.1.11.2.3.7.11.12.1.3.4.1.1.7,HP-SN-SWITCH-GROUP-MIB::snFdbRowStatus,INTEGER,read-write,,mandatory,other(1):valid(2):delete(3):create(4),This object is used to create and
.1.3.6.1.4.1.11.2.3.7.11.12.1.3.5,HP-SN-SWITCH-GROUP-MIB::snPortStpInfo,,,,,,
.1.3.6.1.4.1.11.2.3.7.11.12.1.3.5.1,HP-SN-SWITCH-GROUP-MIB::snPortStpTable,,not-accessible,,mandatory,,A specific snPortStpTable consists of a number of 
.1.3.6.1.4.1.11.2.3.7.11.12.1.3.5.1.1,HP-SN-SWITCH-GROUP-MIB::snPortStpEntry,,not-accessible,snPortStpVLanId:snPortStpPortNum,mandatory,,An entry in the snPortStpTable indicates the 
.1.3.6.1.4.1.11.2.3.7.11.12.1.3.5.1.1.1,HP-SN-SWITCH-GROUP-MIB::snPortStpVLanId,INTEGER,read-only,,mandatory,,The VLAN ID of the VLAN switch community.
.1.3.6.1.4.1.11.2.3.7.11.12.1.3.5.1.1.2,HP-SN-SWITCH-GROUP-MIB::snPortStpPortNum,INTEGER,read-only,,mandatory,,The port number of the Switch. 
.1.3.6.1.4.1.11.2.3.7.11.12.1.3.5.1.1.3,HP-SN-SWITCH-GROUP-MIB::snPortStpPortPriority,INTEGER,read-write,,mandatory,,The value of the priority field which is contained in the first (in network byte order) octet of the (2 octet long) Port ID. The other octet of the Port ID is given by the value of dot1dStpPort.
.1.3.6.1.4.1.11.2.3.7.11.12.1.3.5.1.1.4,HP-SN-SWITCH-GROUP-MIB::snPortStpPathCost,INTEGER,read-write,,mandatory,,dot1dStpPortPathCost : The contribution of this 
.1.3.6.1.4.1.11.2.3.7.11.12.1.3.5.1.1.5,HP-SN-SWITCH-GROUP-MIB::snPortStpOperState,INTEGER,read-only,,mandatory,notActivated(0):activated(1),By default, this mode is set to notActivated(0).
.1.3.6.1.4.1.11.2.3.7.11.12.1.3.5.1.1.6,HP-SN-SWITCH-GROUP-MIB::snPortStpPortEnable,INTEGER,not-accessible,,mandatory,enabled(1):disabled(2),The enabled/disabled status of the port.
.1.3.6.1.4.1.11.2.3.7.11.12.1.3.5.1.1.7,HP-SN-SWITCH-GROUP-MIB::snPortStpPortForwardTransitions,Counter32,not-accessible,,mandatory,,The number of times this port has transitioned from the Learning state to the Forwarding state.
.1.3.6.1.4.1.11.2.3.7.11.12.1.3.5.1.1.8,HP-SN-SWITCH-GROUP-MIB::snPortStpPortState,INTEGER,read-only,,mandatory,disabled(1):blocking(2):listening(3):learning(4):forwarding(5):broken(6),The port's current state as defined by application of the Spanning Tree Protocol. This state controls what action a port takes on reception of a frame. If the bridge has detected a port that is malfunctioning it will place that port into the broken(6) state. For ports which are disabled (see dot1dStpPortEnable), this object will have a value of disabled(1).
.1.3.6.1.4.1.11.2.3.7.11.12.1.3.5.1.1.9,HP-SN-SWITCH-GROUP-MIB::snPortStpPortDesignatedCost,INTEGER,read-only,,mandatory,,The path cost of the Designated Port of the segment connected to this port. This value is compared to the Root Path Cost field in received bridge PDUs.
.1.3.6.1.4.1.11.2.3.7.11.12.1.3.5.1.1.10,HP-SN-SWITCH-GROUP-MIB::snPortStpPortDesignatedRoot,OCTET,read-only,,mandatory,,The unique Bridge Identifier of the Bridge recorded as the Root in the Configuration BPDUs transmitted by the Designated Bridge for the segment to which the port is attached.
.1.3.6.1.4.1.11.2.3.7.11.12.1.3.5.1.1.11,HP-SN-SWITCH-GROUP-MIB::snPortStpPortDesignatedBridge,OCTET,read-only,,mandatory,,The Bridge Identifier of the bridge which this port considers to be the Designated Bridge for this port's segment.
.1.3.6.1.4.1.11.2.3.7.11.12.1.3.5.1.1.12,HP-SN-SWITCH-GROUP-MIB::snPortStpPortDesignatedPort,OCTET,read-only,,mandatory,,The Port Identifier of the port on the Designated Bridge for this port's segment.
.1.3.6.1.4.1.11.2.3.7.11.12.1.3.6,HP-SN-SWITCH-GROUP-MIB::snTrunkInfo,,,,,,
.1.3.6.1.4.1.11.2.3.7.11.12.1.3.6.1,HP-SN-SWITCH-GROUP-MIB::snTrunkTable,,not-accessible,,mandatory,,A specific snTrunkTable consists of a number of 
.1.3.6.1.4.1.11.2.3.7.11.12.1.3.6.1.1,HP-SN-SWITCH-GROUP-MIB::snTrunkEntry,,not-accessible,snTrunkIndex,mandatory,,An entry in the snTrunkTable indicates the 
.1.3.6.1.4.1.11.2.3.7.11.12.1.3.6.1.1.1,HP-SN-SWITCH-GROUP-MIB::snTrunkIndex,INTEGER,read-only,,mandatory,,The number of the trunk entries can be configured.
.1.3.6.1.4.1.11.2.3.7.11.12.1.3.6.1.1.2,HP-SN-SWITCH-GROUP-MIB::snTrunkPortMask,INTEGER,read-write,,mandatory,,Trunk membership of the Switch.
.1.3.6.1.4.1.11.2.3.7.11.12.1.3.6.1.1.3,HP-SN-SWITCH-GROUP-MIB::snTrunkType,INTEGER,read-write,,mandatory,switch(1):server(2),The trunk connection type which specifies what
.1.3.6.1.4.1.11.2.3.7.11.12.1.3.6.2,HP-SN-SWITCH-GROUP-MIB::snMSTrunkTable,,not-accessible,,mandatory,,A table contains the configuration of port members of
.1.3.6.1.4.1.11.2.3.7.11.12.1.3.6.2.1,HP-SN-SWITCH-GROUP-MIB::snMSTrunkEntry,,not-accessible,snMSTrunkPortIndex,mandatory,,An entry of the snMSTrunkTable.
.1.3.6.1.4.1.11.2.3.7.11.12.1.3.6.2.1.1,HP-SN-SWITCH-GROUP-MIB::snMSTrunkPortIndex,INTEGER,read-only,,mandatory,,The primary port of a trunk group. For module with Gig ports,
.1.3.6.1.4.1.11.2.3.7.11.12.1.3.6.2.1.2,HP-SN-SWITCH-GROUP-MIB::snMSTrunkPortList,OCTET,read-write,,mandatory,,A list of port indices which are the port membership
.1.3.6.1.4.1.11.2.3.7.11.12.1.3.6.2.1.3,HP-SN-SWITCH-GROUP-MIB::snMSTrunkType,INTEGER,read-write,,mandatory,switch(1):server(2),The trunk connection type which specifies what
.1.3.6.1.4.1.11.2.3.7.11.12.1.3.6.2.1.4,HP-SN-SWITCH-GROUP-MIB::snMSTrunkRowStatus,INTEGER,read-write,,mandatory,invalid(1):valid(2):delete(3):create(4):modify(5),To create or delete a table entry.
.1.3.6.1.4.1.11.2.3.7.11.12.1.3.7,HP-SN-SWITCH-GROUP-MIB::snSwSummary,,,,,,
.1.3.6.1.4.1.11.2.3.7.11.12.1.3.7.1,HP-SN-SWITCH-GROUP-MIB::snSwSummaryMode,INTEGER,read-write,,mandatory,disabled(0):enabled(1),The Switch Group Configuration Summary is configured 
.1.3.6.1.4.1.11.2.3.7.11.12.1.3.8,HP-SN-SWITCH-GROUP-MIB::snDhcpGatewayListInfo,,,,,,
.1.3.6.1.4.1.11.2.3.7.11.12.1.3.8.1,HP-SN-SWITCH-GROUP-MIB::snDhcpGatewayListTable,,not-accessible,,mandatory,,A table of DHCP gateway list of addresses.
.1.3.6.1.4.1.11.2.3.7.11.12.1.3.8.1.1,HP-SN-SWITCH-GROUP-MIB::snDhcpGatewayListEntry,,not-accessible,snDhcpGatewayListId,mandatory,,An entry in the IP Port Address table.
.1.3.6.1.4.1.11.2.3.7.11.12.1.3.8.1.1.1,HP-SN-SWITCH-GROUP-MIB::snDhcpGatewayListId,INTEGER,read-only,,mandatory,,The ID for a DHCP gateway list entry.
.1.3.6.1.4.1.11.2.3.7.11.12.1.3.8.1.1.2,HP-SN-SWITCH-GROUP-MIB::snDhcpGatewayListAddrList,OCTET,read-write,,mandatory,,The DHCP gateway address list for each DHCP gateway list ID.
.1.3.6.1.4.1.11.2.3.7.11.12.1.3.8.1.1.3,HP-SN-SWITCH-GROUP-MIB::snDhcpGatewayListRowStatus,INTEGER,read-write,,mandatory,other(1):valid(2):delete(3):create(4),This object is used to create and
.1.3.6.1.4.1.11.2.3.7.11.12.1.3.9,HP-SN-SWITCH-GROUP-MIB::snDnsInfo,,,,,,
.1.3.6.1.4.1.11.2.3.7.11.12.1.3.9.1,HP-SN-SWITCH-GROUP-MIB::snDnsDomainName,OCTET,read-write,,mandatory,,DNS Domain Name string.
.1.3.6.1.4.1.11.2.3.7.11.12.1.3.9.2,HP-SN-SWITCH-GROUP-MIB::snDnsGatewayIpAddrList,OCTET,read-write,,mandatory,,The DNS Gateway IP address list. This list contains 4 
.1.3.6.1.4.1.11.2.3.7.11.12.1.3.10,HP-SN-SWITCH-GROUP-MIB::snMacFilter,,,,,,
.1.3.6.1.4.1.11.2.3.7.11.12.1.3.10.1,HP-SN-SWITCH-GROUP-MIB::snMacFilterTable,,not-accessible,,mandatory,,MAC filter table.
.1.3.6.1.4.1.11.2.3.7.11.12.1.3.10.1.1,HP-SN-SWITCH-GROUP-MIB::snMacFilterEntry,,not-accessible,snMacFilterIndex,mandatory,,An entry in the MAC filter table.
.1.3.6.1.4.1.11.2.3.7.11.12.1.3.10.1.1.1,HP-SN-SWITCH-GROUP-MIB::snMacFilterIndex,INTEGER,read-only,,mandatory,,The table index for a filter entry.
.1.3.6.1.4.1.11.2.3.7.11.12.1.3.10.1.1.2,HP-SN-SWITCH-GROUP-MIB::snMacFilterAction,INTEGER,read-write,,mandatory,deny(0):permit(1),Action to take if the Mac packet match
.1.3.6.1.4.1.11.2.3.7.11.12.1.3.10.1.1.3,HP-SN-SWITCH-GROUP-MIB::snMacFilterSourceMac,OCTET,read-write,,mandatory,,Source MAC address.
.1.3.6.1.4.1.11.2.3.7.11.12.1.3.10.1.1.4,HP-SN-SWITCH-GROUP-MIB::snMacFilterSourceMask,OCTET,read-write,,mandatory,,Source MAC subnet mask.
.1.3.6.1.4.1.11.2.3.7.11.12.1.3.10.1.1.5,HP-SN-SWITCH-GROUP-MIB::snMacFilterDestMac,OCTET,read-write,,mandatory,,Destination MAC address.
.1.3.6.1.4.1.11.2.3.7.11.12.1.3.10.1.1.6,HP-SN-SWITCH-GROUP-MIB::snMacFilterDestMask,OCTET,read-write,,mandatory,,Destination MAC subnet mask.
.1.3.6.1.4.1.11.2.3.7.11.12.1.3.10.1.1.7,HP-SN-SWITCH-GROUP-MIB::snMacFilterOperator,INTEGER,read-write,,mandatory,equal(0):notEqual(1):less(2):greater(3),Type of comparison to perform.
.1.3.6.1.4.1.11.2.3.7.11.12.1.3.10.1.1.8,HP-SN-SWITCH-GROUP-MIB::snMacFilterFrameType,INTEGER,read-write,,mandatory,notUsed(0):ethernet(1):llc(2):snap(3),Frame Type: ethernet-type, LLC and SNAP types
.1.3.6.1.4.1.11.2.3.7.11.12.1.3.10.1.1.9,HP-SN-SWITCH-GROUP-MIB::snMacFilterFrameTypeNum,INTEGER,read-write,,mandatory,,Frame Type Number. 0 means NA
.1.3.6.1.4.1.11.2.3.7.11.12.1.3.10.1.1.10,HP-SN-SWITCH-GROUP-MIB::snMacFilterRowStatus,INTEGER,read-write,,mandatory,invalid(1):valid(2):delete(3):create(4):modify(5),This object is used to create and
.1.3.6.1.4.1.11.2.3.7.11.12.1.3.10.2,HP-SN-SWITCH-GROUP-MIB::snMacFilterPortAccessTable,,not-accessible,,mandatory,,MAC Filter port access table.
.1.3.6.1.4.1.11.2.3.7.11.12.1.3.10.2.1,HP-SN-SWITCH-GROUP-MIB::snMacFilterPortAccessEntry,,not-accessible,snMacFilterPortAccessPortIndex,mandatory,,An entry in the MAC Filter Port access table.
.1.3.6.1.4.1.11.2.3.7.11.12.1.3.10.2.1.1,HP-SN-SWITCH-GROUP-MIB::snMacFilterPortAccessPortIndex,INTEGER,read-only,,mandatory,,The port index.
.1.3.6.1.4.1.11.2.3.7.11.12.1.3.10.2.1.2,HP-SN-SWITCH-GROUP-MIB::snMacFilterPortAccessFilters,OCTET,read-write,,mandatory,,1st octet correspond to 1st filter 
.1.3.6.1.4.1.11.2.3.7.11.12.1.3.10.2.1.3,HP-SN-SWITCH-GROUP-MIB::snMacFilterPortAccessRowStatus,INTEGER,read-write,,mandatory,invalid(1):valid(2):delete(3):create(4),This object is used to create and
.1.3.6.1.4.1.11.2.3.7.11.12.1.3.11,HP-SN-SWITCH-GROUP-MIB::snNTP,,,,,,
.1.3.6.1.4.1.11.2.3.7.11.12.1.3.11.1,HP-SN-SWITCH-GROUP-MIB::snNTPGeneral,,,,,,
.1.3.6.1.4.1.11.2.3.7.11.12.1.3.11.1.1,HP-SN-SWITCH-GROUP-MIB::snNTPPollInterval,INTEGER,read-write,,mandatory,,Interval specifies how often to poll the NTP server.
.1.3.6.1.4.1.11.2.3.7.11.12.1.3.11.1.2,HP-SN-SWITCH-GROUP-MIB::snNTPTimeZone,INTEGER,read-write,,mandatory,alaska(0):aleutian(1):arizona(2):central(3):eastIndiana(4):eastern(5):hawaii(6):michigan(7):mountain(8):pacific(9):samoa(10):gmtPlus12(11):gmtPlus11(12):gmtPlus10(13):gmtPlus9(14):gmtPlus8(15):gmtPlus7(16):gmtPlus6(17):gmtPlus5(18):gmtPlus4(19):gmtPlus3(20):gmtPlus2(21):gmtPlus1(22):gmt(23):gmtMinus1(24):gmtMinus2(25):gmtMinus3(26):gmtMinus4(27):gmtMinus5(28):gmtMinus6(29):gmtMinus7(30):gmtMinus8(31):gmtMinus9(32):gmtMinus10(33):gmtMinus11(34):gmtMinus12(35),Time zone.
.1.3.6.1.4.1.11.2.3.7.11.12.1.3.11.1.3,HP-SN-SWITCH-GROUP-MIB::snNTPSummerTimeEnable,INTEGER,read-write,,mandatory,disabled(0):enabled(1),Enable/Disable daylight saving time. This enables daylight
.1.3.6.1.4.1.11.2.3.7.11.12.1.3.11.1.4,HP-SN-SWITCH-GROUP-MIB::snNTPSystemClock,OCTET,read-write,,mandatory,,System clock, in the following format:
.1.3.6.1.4.1.11.2.3.7.11.12.1.3.11.1.5,HP-SN-SWITCH-GROUP-MIB::snNTPSync,INTEGER,read-write,,mandatory,other(1):synchronize(2),Initiate time synchronization to the NTP servers.
.1.3.6.1.4.1.11.2.3.7.11.12.1.3.11.2,HP-SN-SWITCH-GROUP-MIB::snNTPServerTable,,not-accessible,,mandatory,,NTP (Network Time Protocol) server table.
.1.3.6.1.4.1.11.2.3.7.11.12.1.3.11.2.1,HP-SN-SWITCH-GROUP-MIB::snNTPServerEntry,,not-accessible,snNTPServerIp,mandatory,,An entry in the NTP server table.
.1.3.6.1.4.1.11.2.3.7.11.12.1.3.11.2.1.1,HP-SN-SWITCH-GROUP-MIB::snNTPServerIp,IpAddress,read-only,,mandatory,,NTP server IP address.
.1.3.6.1.4.1.11.2.3.7.11.12.1.3.11.2.1.2,HP-SN-SWITCH-GROUP-MIB::snNTPServerVersion,INTEGER,read-write,,mandatory,,NTP server version.
.1.3.6.1.4.1.11.2.3.7.11.12.1.3.11.2.1.3,HP-SN-SWITCH-GROUP-MIB::snNTPServerRowStatus,INTEGER,read-write,,mandatory,other(1):valid(2):delete(3):create(4),To create or delete a NTP server table entry.
.1.3.6.1.4.1.11.2.3.7.11.12.1.3.12,HP-SN-SWITCH-GROUP-MIB::snRadius,,,,,,
.1.3.6.1.4.1.11.2.3.7.11.12.1.3.12.1,HP-SN-SWITCH-GROUP-MIB::snRadiusGeneral,,,,,,
.1.3.6.1.4.1.11.2.3.7.11.12.1.3.12.1.1,HP-SN-SWITCH-GROUP-MIB::snRadiusSNMPAccess,INTEGER,read-only,,mandatory,disabled(0):enabled(1),Indicate whether Radius group MIB obejcts can be
.1.3.6.1.4.1.11.2.3.7.11.12.1.3.12.1.2,HP-SN-SWITCH-GROUP-MIB::snRadiusEnableTelnetAuth,INTEGER,read-write,,mandatory,disabled(0):enabled(1),Enable/Disable telnet authentication specified
.1.3.6.1.4.1.11.2.3.7.11.12.1.3.12.1.3,HP-SN-SWITCH-GROUP-MIB::snRadiusRetransmit,INTEGER,read-write,,mandatory,,The number of authentication query retransmissions
.1.3.6.1.4.1.11.2.3.7.11.12.1.3.12.1.4,HP-SN-SWITCH-GROUP-MIB::snRadiusTimeOut,INTEGER,read-write,,mandatory,,Interval specifies how long to wait for authentication
.1.3.6.1.4.1.11.2.3.7.11.12.1.3.12.1.5,HP-SN-SWITCH-GROUP-MIB::snRadiusDeadTime,INTEGER,read-write,,mandatory,,Interval specifies Radius server dead time,
.1.3.6.1.4.1.11.2.3.7.11.12.1.3.12.1.6,HP-SN-SWITCH-GROUP-MIB::snRadiusKey,OCTET,read-write,,mandatory,,Authentication key displayed as encrypted text.
.1.3.6.1.4.1.11.2.3.7.11.12.1.3.12.1.7,HP-SN-SWITCH-GROUP-MIB::snRadiusLoginMethod,OCTET,read-write,,mandatory,,A sequence of authentication methods. Each octet represents
.1.3.6.1.4.1.11.2.3.7.11.12.1.3.12.1.8,HP-SN-SWITCH-GROUP-MIB::snRadiusEnableMethod,OCTET,read-write,,mandatory,,A sequence of authentication methods. Each octet represents
.1.3.6.1.4.1.11.2.3.7.11.12.1.3.12.1.9,HP-SN-SWITCH-GROUP-MIB::snRadiusWebServerMethod,OCTET,read-write,,mandatory,,A sequence of authentication methods. Each octet represents
.1.3.6.1.4.1.11.2.3.7.11.12.1.3.12.1.10,HP-SN-SWITCH-GROUP-MIB::snRadiusSNMPServerMethod,OCTET,read-write,,mandatory,,A sequence of authentication methods. Each octet represents
.1.3.6.1.4.1.11.2.3.7.11.12.1.3.12.2,HP-SN-SWITCH-GROUP-MIB::snRadiusServerTable,,not-accessible,,mandatory,,Radius server table.
.1.3.6.1.4.1.11.2.3.7.11.12.1.3.12.2.1,HP-SN-SWITCH-GROUP-MIB::snRadiusServerEntry,,not-accessible,snRadiusServerIp,mandatory,,An entry in the Radius server table.
.1.3.6.1.4.1.11.2.3.7.11.12.1.3.12.2.1.1,HP-SN-SWITCH-GROUP-MIB::snRadiusServerIp,IpAddress,read-only,,mandatory,,Radius server IP address.
.1.3.6.1.4.1.11.2.3.7.11.12.1.3.12.2.1.2,HP-SN-SWITCH-GROUP-MIB::snRadiusServerAuthPort,INTEGER,read-write,,mandatory,,Authentication UDP port number.
.1.3.6.1.4.1.11.2.3.7.11.12.1.3.12.2.1.3,HP-SN-SWITCH-GROUP-MIB::snRadiusServerAcctPort,INTEGER,read-write,,mandatory,,Account UDP port number.
.1.3.6.1.4.1.11.2.3.7.11.12.1.3.12.2.1.4,HP-SN-SWITCH-GROUP-MIB::snRadiusServerRowStatus,INTEGER,read-write,,mandatory,other(1):valid(2):delete(3):create(4),To create or delete a Radius server table entry.
.1.3.6.1.4.1.11.2.3.7.11.12.1.3.12.2.1.5,HP-SN-SWITCH-GROUP-MIB::snRadiusServerRowKey,OCTET,read-write,,mandatory,,Authentication key displayed as encrypted text.
.1.3.6.1.4.1.11.2.3.7.11.12.1.3.12.2.1.6,HP-SN-SWITCH-GROUP-MIB::snRadiusServerUsage,INTEGER,read-write,,mandatory,default(1):authentication-only(2):authorization-only(3):accounting-only(4),To allow this server to be dedicated for a particular AAA activity.
.1.3.6.1.4.1.11.2.3.7.11.12.1.3.13,HP-SN-SWITCH-GROUP-MIB::snTacacs,,,,,,
.1.3.6.1.4.1.11.2.3.7.11.12.1.3.13.1,HP-SN-SWITCH-GROUP-MIB::snTacacsGeneral,,,,,,
.1.3.6.1.4.1.11.2.3.7.11.12.1.3.13.1.1,HP-SN-SWITCH-GROUP-MIB::snTacacsRetransmit,INTEGER,read-write,,mandatory,,The number of authentication query retransmissions
.1.3.6.1.4.1.11.2.3.7.11.12.1.3.13.1.2,HP-SN-SWITCH-GROUP-MIB::snTacacsTimeOut,INTEGER,read-write,,mandatory,,Interval specifies how long to wait for authentication
.1.3.6.1.4.1.11.2.3.7.11.12.1.3.13.1.3,HP-SN-SWITCH-GROUP-MIB::snTacacsDeadTime,INTEGER,read-write,,mandatory,,Interval specifies Tacacs server dead time,
.1.3.6.1.4.1.11.2.3.7.11.12.1.3.13.1.4,HP-SN-SWITCH-GROUP-MIB::snTacacsKey,OCTET,read-write,,mandatory,,Authentication key displayed as encrypted text.
.1.3.6.1.4.1.11.2.3.7.11.12.1.3.13.1.5,HP-SN-SWITCH-GROUP-MIB::snTacacsSNMPAccess,INTEGER,read-only,,mandatory,disabled(0):enabled(1),Indicate whether Tacacs group MIB obejcts can be
.1.3.6.1.4.1.11.2.3.7.11.12.1.3.13.2,HP-SN-SWITCH-GROUP-MIB::snTacacsServerTable,,not-accessible,,mandatory,,Tacacs server table.
.1.3.6.1.4.1.11.2.3.7.11.12.1.3.13.2.1,HP-SN-SWITCH-GROUP-MIB::snTacacsServerEntry,,not-accessible,snTacacsServerIp,mandatory,,An entry in the Tacacs server table.
.1.3.6.1.4.1.11.2.3.7.11.12.1.3.13.2.1.1,HP-SN-SWITCH-GROUP-MIB::snTacacsServerIp,IpAddress,read-only,,mandatory,,Tacacs server IP address.
.1.3.6.1.4.1.11.2.3.7.11.12.1.3.13.2.1.2,HP-SN-SWITCH-GROUP-MIB::snTacacsServerAuthPort,INTEGER,read-write,,mandatory,,Authentication UDP port number.
.1.3.6.1.4.1.11.2.3.7.11.12.1.3.13.2.1.3,HP-SN-SWITCH-GROUP-MIB::snTacacsServerRowStatus,INTEGER,read-write,,mandatory,other(1):valid(2):delete(3):create(4),To create or delete a Tacacs server table entry.
.1.3.6.1.4.1.11.2.3.7.11.12.1.3.13.2.1.4,HP-SN-SWITCH-GROUP-MIB::snTacacsServerRowKey,OCTET,read-write,,mandatory,,Authentication key displayed as encrypted text.
.1.3.6.1.4.1.11.2.3.7.11.12.1.3.13.2.1.5,HP-SN-SWITCH-GROUP-MIB::snTacacsServerUsage,INTEGER,read-write,,mandatory,default(1):authentication-only(2):authorization-only(3):accounting-only(4),To allow this server to be dedicated for a particular AAA activity.
.1.3.6.1.4.1.11.2.3.7.11.12.1.3.14,HP-SN-SWITCH-GROUP-MIB::snQos,,,,,,
.1.3.6.1.4.1.11.2.3.7.11.12.1.3.14.1,HP-SN-SWITCH-GROUP-MIB::snQosProfileTable,,not-accessible,,mandatory,,A table contains the configuration of qos profile 
.1.3.6.1.4.1.11.2.3.7.11.12.1.3.14.1.1,HP-SN-SWITCH-GROUP-MIB::snQosProfileEntry,,not-accessible,snQosProfileIndex,mandatory,,An entry of the snQosProfileTable.
.1.3.6.1.4.1.11.2.3.7.11.12.1.3.14.1.1.1,HP-SN-SWITCH-GROUP-MIB::snQosProfileIndex,INTEGER,read-only,,mandatory,,The table index of QOS Profile.
.1.3.6.1.4.1.11.2.3.7.11.12.1.3.14.1.1.2,HP-SN-SWITCH-GROUP-MIB::snQosProfileName,OCTET,read-write,,mandatory,,Qos Profile Name string.
.1.3.6.1.4.1.11.2.3.7.11.12.1.3.14.1.1.3,HP-SN-SWITCH-GROUP-MIB::snQosProfileRequestedBandwidth,INTEGER,read-write,,mandatory,,Qos Profile Requested Bandwidth.
.1.3.6.1.4.1.11.2.3.7.11.12.1.3.14.1.1.4,HP-SN-SWITCH-GROUP-MIB::snQosProfileCalculatedBandwidth,INTEGER,read-only,,mandatory,,Qos Profile Calculated Bandwidth.
.1.3.6.1.4.1.11.2.3.7.11.12.1.3.14.2,HP-SN-SWITCH-GROUP-MIB::snQosBindTable,,not-accessible,,mandatory,,A table contains the configuration of 802.1p to qos profile 
.1.3.6.1.4.1.11.2.3.7.11.12.1.3.14.2.1,HP-SN-SWITCH-GROUP-MIB::snQosBindEntry,,not-accessible,snQosBindIndex,mandatory,,An entry of the snQosBindTable.
.1.3.6.1.4.1.11.2.3.7.11.12.1.3.14.2.1.1,HP-SN-SWITCH-GROUP-MIB::snQosBindIndex,INTEGER,read-only,,mandatory,,The table index of QOS Bind.
.1.3.6.1.4.1.11.2.3.7.11.12.1.3.14.2.1.2,HP-SN-SWITCH-GROUP-MIB::snQosBindPriority,INTEGER,read-only,,mandatory,,QOS bind priority.
.1.3.6.1.4.1.11.2.3.7.11.12.1.3.14.2.1.3,HP-SN-SWITCH-GROUP-MIB::snQosBindProfileIndex,INTEGER,read-write,,mandatory,,QOS Bind Profile Index. This is pointer to the
.1.3.6.1.4.1.11.2.3.7.11.12.1.3.15,HP-SN-SWITCH-GROUP-MIB::snAAA,,,,,,
.1.3.6.1.4.1.11.2.3.7.11.12.1.3.15.1,HP-SN-SWITCH-GROUP-MIB::snAuthentication,,,,,,
.1.3.6.1.4.1.11.2.3.7.11.12.1.3.15.2,HP-SN-SWITCH-GROUP-MIB::snAuthorization,,,,,,
.1.3.6.1.4.1.11.2.3.7.11.12.1.3.15.2.1,HP-SN-SWITCH-GROUP-MIB::snAuthorizationCommandMethods,OCTET,read-write,,mandatory,,A sequence of authorization methods. Each octet represents
.1.3.6.1.4.1.11.2.3.7.11.12.1.3.15.2.2,HP-SN-SWITCH-GROUP-MIB::snAuthorizationCommandLevel,INTEGER,read-write,,mandatory,level0(0):level4(4):level5(5),Commands, which are equal to and less than the specified
.1.3.6.1.4.1.11.2.3.7.11.12.1.3.15.2.3,HP-SN-SWITCH-GROUP-MIB::snAuthorizationExec,OCTET,read-write,,mandatory,,A sequence of exec authorization methods. Each octet represents
.1.3.6.1.4.1.11.2.3.7.11.12.1.3.15.3,HP-SN-SWITCH-GROUP-MIB::snAccounting,,,,,,
.1.3.6.1.4.1.11.2.3.7.11.12.1.3.15.3.1,HP-SN-SWITCH-GROUP-MIB::snAccountingCommandMethods,OCTET,read-write,,mandatory,,A sequence of accounting methods. Each octet represents
.1.3.6.1.4.1.11.2.3.7.11.12.1.3.15.3.2,HP-SN-SWITCH-GROUP-MIB::snAccountingCommandLevel,INTEGER,read-write,,mandatory,level0(0):level4(4):level5(5),Commands, which are equal to and less than the specified
.1.3.6.1.4.1.11.2.3.7.11.12.1.3.15.3.3,HP-SN-SWITCH-GROUP-MIB::snAccountingExec,OCTET,read-write,,mandatory,,A sequence of accounting methods. Each octet represents
.1.3.6.1.4.1.11.2.3.7.11.12.1.3.15.3.4,HP-SN-SWITCH-GROUP-MIB::snAccountingSystem,OCTET,read-write,,mandatory,,A sequence of accounting methods. Each octet represents
.1.3.6.1.4.1.11.2.3.7.11.12.1.3.16,HP-SN-SWITCH-GROUP-MIB::snCAR,,,,,,
.1.3.6.1.4.1.11.2.3.7.11.12.1.3.16.1,HP-CAR-MIB::snPortCARs,,,,,,
.1.3.6.1.4.1.11.2.3.7.11.12.1.3.16.1.1,HP-CAR-MIB::snPortCARTable,,not-accessible,,mandatory,,A table of rate limit configuration entries.
.1.3.6.1.4.1.11.2.3.7.11.12.1.3.16.1.1.1,HP-CAR-MIB::snPortCAREntry,,not-accessible,snPortCARifIndex:snPortCARDirection:snPortCARRowIndex,mandatory,,A collection of rate-limit configuration objects on this 
.1.3.6.1.4.1.11.2.3.7.11.12.1.3.16.1.1.1.1,HP-CAR-MIB::snPortCARifIndex,INTEGER,read-only,,mandatory,,The ifIndex value for this rate limit entry.
.1.3.6.1.4.1.11.2.3.7.11.12.1.3.16.1.1.1.2,HP-CAR-MIB::snPortCARDirection,INTEGER,read-only,,mandatory,input(0):output(1),The input or output transmission direction for the  Rate Limit object.
.1.3.6.1.4.1.11.2.3.7.11.12.1.3.16.1.1.1.3,HP-CAR-MIB::snPortCARRowIndex,INTEGER,read-only,,mandatory,,The table index for rate limit objects.
.1.3.6.1.4.1.11.2.3.7.11.12.1.3.16.1.1.1.4,HP-CAR-MIB::snPortCARType,INTEGER,read-only,,mandatory,all(3):quickAcc(2):standardAcc(1),The type of traffic rate-limited against.
.1.3.6.1.4.1.11.2.3.7.11.12.1.3.16.1.1.1.5,HP-CAR-MIB::snPortCARAccIdx,INTEGER,read-only,,mandatory,,The index to the access list if RateLimitType is either
.1.3.6.1.4.1.11.2.3.7.11.12.1.3.16.1.1.1.6,HP-CAR-MIB::snPortCARRate,INTEGER,read-only,,mandatory,,The comitted access rate. This determines the long term
.1.3.6.1.4.1.11.2.3.7.11.12.1.3.16.1.1.1.7,HP-CAR-MIB::snPortCARLimit,INTEGER,read-only,,mandatory,,This is the normal burst size that determines how large traffic
.1.3.6.1.4.1.11.2.3.7.11.12.1.3.16.1.1.1.8,HP-CAR-MIB::snPortCARExtLimit,INTEGER,read-only,,mandatory,,This is the extended burst limit that determines how large traffic
.1.3.6.1.4.1.11.2.3.7.11.12.1.3.16.1.1.1.9,HP-CAR-MIB::snPortCARConformAction,INTEGER,read-only,,mandatory,continue(1):drop(2):precedCont(3):precedXmit(4):xmit(5),Action to be taken when the traffic is within
.1.3.6.1.4.1.11.2.3.7.11.12.1.3.16.1.1.1.10,HP-CAR-MIB::snPortCARExceedAction,INTEGER,read-only,,mandatory,continue(1):drop(2):precedCont(3):precedXmit(4):xmit(5),Action to be taken when the traffic exceeds
.1.3.6.1.4.1.11.2.3.7.11.12.1.3.16.1.1.1.11,HP-CAR-MIB::snPortCARStatSwitchedPkts,Counter64,read-only,,mandatory,,The counter of packets permitted by this rate limit.
.1.3.6.1.4.1.11.2.3.7.11.12.1.3.16.1.1.1.12,HP-CAR-MIB::snPortCARStatSwitchedBytes,Counter64,read-only,,mandatory,,The counter of bytes permitted by this interface.
.1.3.6.1.4.1.11.2.3.7.11.12.1.3.16.1.1.1.13,HP-CAR-MIB::snPortCARStatFilteredPkts,Counter64,read-only,,mandatory,,The counter of packets which exceeded this rate limit.
.1.3.6.1.4.1.11.2.3.7.11.12.1.3.16.1.1.1.14,HP-CAR-MIB::snPortCARStatFilteredBytes,Counter64,read-only,,mandatory,,The counter of bytes which exceeded this rate limit.
.1.3.6.1.4.1.11.2.3.7.11.12.1.3.16.1.1.1.15,HP-CAR-MIB::snPortCARStatCurBurst,Gauge32,read-only,,mandatory,,The current received burst size.
.1.3.6.1.4.1.11.2.3.7.11.12.1.3.17,HP-SN-SWITCH-GROUP-MIB::snVLanCAR,,,,,,
.1.3.6.1.4.1.11.2.3.7.11.12.1.3.17.1,HP-VLAN-CAR-MIB::snVLanCARs,,,,,,
.1.3.6.1.4.1.11.2.3.7.11.12.1.3.17.1.1,HP-VLAN-CAR-MIB::snVLanCARTable,,not-accessible,,mandatory,,A table of rate limit configuration entries for a vlan.
.1.3.6.1.4.1.11.2.3.7.11.12.1.3.17.1.1.1,HP-VLAN-CAR-MIB::snVLanCAREntry,,not-accessible,snVLanCARVLanId:snVLanCARDirection:snVLanCARRowIndex,mandatory,,A collection of rate-limit configuration objects on this 
.1.3.6.1.4.1.11.2.3.7.11.12.1.3.17.1.1.1.1,HP-VLAN-CAR-MIB::snVLanCARVLanId,INTEGER,read-only,,mandatory,,The VLAN ID as one of the indices of this table .
.1.3.6.1.4.1.11.2.3.7.11.12.1.3.17.1.1.1.2,HP-VLAN-CAR-MIB::snVLanCARDirection,INTEGER,read-only,,mandatory,input(0):output(1),The input or output transmission direction for the  Rate Limit object.
.1.3.6.1.4.1.11.2.3.7.11.12.1.3.17.1.1.1.3,HP-VLAN-CAR-MIB::snVLanCARRowIndex,INTEGER,read-only,,mandatory,,The table index for rate limit objects.
.1.3.6.1.4.1.11.2.3.7.11.12.1.3.17.1.1.1.4,HP-VLAN-CAR-MIB::snVLanCARType,INTEGER,read-only,,mandatory,all(3):quickAcc(2):standardAcc(1),The type of traffic rate-limited against.
.1.3.6.1.4.1.11.2.3.7.11.12.1.3.17.1.1.1.5,HP-VLAN-CAR-MIB::snVLanCARAccIdx,INTEGER,read-only,,mandatory,,The index to the access list if RateLimitType is either
.1.3.6.1.4.1.11.2.3.7.11.12.1.3.17.1.1.1.6,HP-VLAN-CAR-MIB::snVLanCARRate,INTEGER,read-only,,mandatory,,The comitted access rate. This determines the long term
.1.3.6.1.4.1.11.2.3.7.11.12.1.3.17.1.1.1.7,HP-VLAN-CAR-MIB::snVLanCARLimit,INTEGER,read-only,,mandatory,,This is the normal burst size that determines how large traffic
.1.3.6.1.4.1.11.2.3.7.11.12.1.3.17.1.1.1.8,HP-VLAN-CAR-MIB::snVLanCARExtLimit,INTEGER,read-only,,mandatory,,This is the extended burst limit that determines how large traffic
.1.3.6.1.4.1.11.2.3.7.11.12.1.3.17.1.1.1.9,HP-VLAN-CAR-MIB::snVLanCARConformAction,INTEGER,read-only,,mandatory,continue(1):drop(2):precedCont(3):precedXmit(4):xmit(5),Action to be taken when the traffic is within
.1.3.6.1.4.1.11.2.3.7.11.12.1.3.17.1.1.1.10,HP-VLAN-CAR-MIB::snVLanCARExceedAction,INTEGER,read-only,,mandatory,continue(1):drop(2):precedCont(3):precedXmit(4):xmit(5),Action to be taken when the traffic exceeds
.1.3.6.1.4.1.11.2.3.7.11.12.1.3.17.1.1.1.11,HP-VLAN-CAR-MIB::snVLanCARStatSwitchedPkts,Counter64,read-only,,mandatory,,The counter of packets permitted by this rate limit.
.1.3.6.1.4.1.11.2.3.7.11.12.1.3.17.1.1.1.12,HP-VLAN-CAR-MIB::snVLanCARStatSwitchedBytes,Counter64,read-only,,mandatory,,The counter of bytes permitted by this interface.
.1.3.6.1.4.1.11.2.3.7.11.12.1.3.17.1.1.1.13,HP-VLAN-CAR-MIB::snVLanCARStatFilteredPkts,Counter64,read-only,,mandatory,,The counter of packets which exceeded this rate limit.
.1.3.6.1.4.1.11.2.3.7.11.12.1.3.17.1.1.1.14,HP-VLAN-CAR-MIB::snVLanCARStatFilteredBytes,Counter64,read-only,,mandatory,,The counter of bytes which exceeded this rate limit.
.1.3.6.1.4.1.11.2.3.7.11.12.1.3.17.1.1.1.15,HP-VLAN-CAR-MIB::snVLanCARStatCurBurst,Gauge32,read-only,,mandatory,,The current received burst size.
.1.3.6.1.4.1.11.2.3.7.11.12.1.3.18,HP-SN-SWITCH-GROUP-MIB::snNetFlow,,,,,,
.1.3.6.1.4.1.11.2.3.7.11.12.1.3.18.1,HP-SN-SWITCH-GROUP-MIB::snNetFlowGlb,,,,,,
.1.3.6.1.4.1.11.2.3.7.11.12.1.3.18.1.1,HP-SN-SWITCH-GROUP-MIB::snNetFlowGblEnable,INTEGER,read-write,,mandatory,disabled(0):enabled(1),Enable/disable NetFlow export operation.
.1.3.6.1.4.1.11.2.3.7.11.12.1.3.18.1.2,HP-SN-SWITCH-GROUP-MIB::snNetFlowGblVersion,INTEGER,read-write,,mandatory,version1(1):version5(5),NetFlow export version.
.1.3.6.1.4.1.11.2.3.7.11.12.1.3.18.1.3,HP-SN-SWITCH-GROUP-MIB::snNetFlowGblProtocolDisable,INTEGER,read-write,,mandatory,,bit 0 - other, disable all protocols export except UDP and TCP
.1.3.6.1.4.1.11.2.3.7.11.12.1.3.18.1.4,HP-SN-SWITCH-GROUP-MIB::snNetFlowGblActiveTimeout,INTEGER,read-write,,mandatory,,Maximum time an active flow can be in the NetFlow cache (minutes: 1..60)
.1.3.6.1.4.1.11.2.3.7.11.12.1.3.18.1.5,HP-SN-SWITCH-GROUP-MIB::snNetFlowGblInactiveTimeout,INTEGER,read-write,,mandatory,,Maximum time an inactive flow can be in the NetFlow cache (seconds: 10..600)
.1.3.6.1.4.1.11.2.3.7.11.12.1.3.18.2,HP-SN-SWITCH-GROUP-MIB::snNetFlowCollectorTable,,not-accessible,,mandatory,,A table of each NetFlow collector information.
.1.3.6.1.4.1.11.2.3.7.11.12.1.3.18.2.1,HP-SN-SWITCH-GROUP-MIB::snNetFlowCollectorEntry,,not-accessible,snNetFlowCollectorIndex,mandatory,,A row in the NetFlow collector table.
.1.3.6.1.4.1.11.2.3.7.11.12.1.3.18.2.1.1,HP-SN-SWITCH-GROUP-MIB::snNetFlowCollectorIndex,INTEGER,read-only,,mandatory,,The index to the NetFlow collector table.
.1.3.6.1.4.1.11.2.3.7.11.12.1.3.18.2.1.2,HP-SN-SWITCH-GROUP-MIB::snNetFlowCollectorIp,IpAddress,read-write,,mandatory,,The NetFlow collector ip address.
.1.3.6.1.4.1.11.2.3.7.11.12.1.3.18.2.1.3,HP-SN-SWITCH-GROUP-MIB::snNetFlowCollectorUdpPort,INTEGER,read-write,,mandatory,,The NetFlow collector UDP port number.
.1.3.6.1.4.1.11.2.3.7.11.12.1.3.18.2.1.4,HP-SN-SWITCH-GROUP-MIB::snNetFlowCollectorSourceInterface,INTEGER,read-write,,mandatory,,The ifIndex value to specify source port to
.1.3.6.1.4.1.11.2.3.7.11.12.1.3.18.2.1.5,HP-SN-SWITCH-GROUP-MIB::snNetFlowCollectorRowStatus,INTEGER,read-write,,mandatory,other(1):valid(2):delete(3):create(4),To create or delete a NetFlow collector table entry.
.1.3.6.1.4.1.11.2.3.7.11.12.1.3.18.3,HP-SN-SWITCH-GROUP-MIB::snNetFlowAggregationTable,,not-accessible,,mandatory,,A table of each NetFlow aggregation scheme information.
.1.3.6.1.4.1.11.2.3.7.11.12.1.3.18.3.1,HP-SN-SWITCH-GROUP-MIB::snNetFlowAggregationEntry,,not-accessible,snNetFlowAggregationIndex,mandatory,,A row in the NetFlow Aggregation table.
.1.3.6.1.4.1.11.2.3.7.11.12.1.3.18.3.1.1,HP-SN-SWITCH-GROUP-MIB::snNetFlowAggregationIndex,INTEGER,read-only,,mandatory,as(1):protocolPort(2):destPrefix(3):sourcePrefix(4):prefix(5),The Aggregation scheme ID
.1.3.6.1.4.1.11.2.3.7.11.12.1.3.18.3.1.2,HP-SN-SWITCH-GROUP-MIB::snNetFlowAggregationIp,IpAddress,read-write,,mandatory,,The NetFlow aggregation collector ip address.
.1.3.6.1.4.1.11.2.3.7.11.12.1.3.18.3.1.3,HP-SN-SWITCH-GROUP-MIB::snNetFlowAggregationUdpPort,INTEGER,read-write,,mandatory,,The NetFlow aggregation collector UDP port number.
.1.3.6.1.4.1.11.2.3.7.11.12.1.3.18.3.1.4,HP-SN-SWITCH-GROUP-MIB::snNetFlowAggregationSourceInterface,INTEGER,read-write,,mandatory,,The ifIndex value to specify source port to
.1.3.6.1.4.1.11.2.3.7.11.12.1.3.18.3.1.5,HP-SN-SWITCH-GROUP-MIB::snNetFlowAggregationNumberOfCacheEntries,INTEGER,read-write,,mandatory,,Number of cache entries for aggregation scheme
.1.3.6.1.4.1.11.2.3.7.11.12.1.3.18.3.1.6,HP-SN-SWITCH-GROUP-MIB::snNetFlowAggregationActiveTimeout,INTEGER,read-write,,mandatory,,Maximum time an active flow can be in
.1.3.6.1.4.1.11.2.3.7.11.12.1.3.18.3.1.7,HP-SN-SWITCH-GROUP-MIB::snNetFlowAggregationInactiveTimeout,INTEGER,read-write,,mandatory,,Maximum time an inactive flow can be in
.1.3.6.1.4.1.11.2.3.7.11.12.1.3.18.3.1.8,HP-SN-SWITCH-GROUP-MIB::snNetFlowAggregationEnable,INTEGER,read-write,,mandatory,disabled(0):enabled(1),Enable/disable NetFlow aggregation
.1.3.6.1.4.1.11.2.3.7.11.12.1.3.18.3.1.9,HP-SN-SWITCH-GROUP-MIB::snNetFlowAggregationRowStatus,INTEGER,read-write,,mandatory,other(1):valid(2):delete(3):create(4),To create or delete a NetFlow collector table entry.
.1.3.6.1.4.1.11.2.3.7.11.12.1.3.18.4,HP-SN-SWITCH-GROUP-MIB::snNetFlowIfTable,,not-accessible,,mandatory,,A list of interface entries. The number of entries is given by the value of ifNumber.
.1.3.6.1.4.1.11.2.3.7.11.12.1.3.18.4.1,HP-SN-SWITCH-GROUP-MIB::snNetFlowIfEntry,,not-accessible,snNetFlowIfIndex,mandatory,,Entry containing the type of switching performed
.1.3.6.1.4.1.11.2.3.7.11.12.1.3.18.4.1.1,HP-SN-SWITCH-GROUP-MIB::snNetFlowIfIndex,INTEGER,read-only,,mandatory,,A unique value, greater than zero, for each interface. It is recommended that values are assigned contiguously starting from 1. The value for each interface sub-layer must remain constant at least from one re-initialization of the entity's network management system to the next re-initialization.
.1.3.6.1.4.1.11.2.3.7.11.12.1.3.18.4.1.2,HP-SN-SWITCH-GROUP-MIB::snNetFlowIfFlowSwitching,INTEGER,read-write,,mandatory,disabled(0):enabled(1),To enable/disable flow switching in a particular
.1.3.6.1.4.1.11.2.3.7.11.12.1.3.19,HP-SN-SWITCH-GROUP-MIB::snSFlow,,,,,,
.1.3.6.1.4.1.11.2.3.7.11.12.1.3.19.1,HP-SN-SWITCH-GROUP-MIB::snSFlowGlb,,,,,,
.1.3.6.1.4.1.11.2.3.7.11.12.1.3.19.2,HP-SN-SWITCH-GROUP-MIB::snSflowCollectorTable,,not-accessible,,mandatory,,Table of all but first sFlow collectors. The first collector can be configured
.1.3.6.1.4.1.11.2.3.7.11.12.1.3.19.2.1,HP-SN-SWITCH-GROUP-MIB::snSflowCollectorEntry,,not-accessible,snSflowCollectorIndex,mandatory,,A row in the sFlow collector table.
.1.3.6.1.4.1.11.2.3.7.11.12.1.3.19.2.1.1,HP-SN-SWITCH-GROUP-MIB::snSflowCollectorIndex,INTEGER,read-only,,mandatory,,The index to the sFlow collector table.
.1.3.6.1.4.1.11.2.3.7.11.12.1.3.19.2.1.2,HP-SN-SWITCH-GROUP-MIB::snSflowCollectorIP,IpAddress,read-write,,mandatory,,The sFlow collector ip address.
.1.3.6.1.4.1.11.2.3.7.11.12.1.3.19.2.1.3,HP-SN-SWITCH-GROUP-MIB::snSflowCollectorUDPPort,INTEGER,read-write,,mandatory,,The sFlow collector UDP port number.
.1.3.6.1.4.1.11.2.3.7.11.12.1.3.19.2.1.4,HP-SN-SWITCH-GROUP-MIB::snSflowCollectorRowStatus,INTEGER,read-write,,mandatory,noSuch(0):other(1):valid(2):delete(3):create(4):modify(5),To create, update or delete a SFlow collector table entry.
.1.3.6.1.4.1.11.2.3.7.11.12.1.3.20,HP-SN-SWITCH-GROUP-MIB::snFDP,,,,,,
.1.3.6.1.4.1.11.2.3.7.11.12.1.3.20.1,HP-SN-SWITCH-GROUP-MIB::snFdpMIBObjects,,,,,,
.1.3.6.1.4.1.11.2.3.7.11.12.1.3.20.1.1,HP-SN-SWITCH-GROUP-MIB::snFdpInterface,,,,,,
.1.3.6.1.4.1.11.2.3.7.11.12.1.3.20.1.1.1,HP-SN-SWITCH-GROUP-MIB::snFdpInterfaceTable,,not-accessible,,mandatory,,Status of FDP on the device's interfaces.
.1.3.6.1.4.1.11.2.3.7.11.12.1.3.20.1.1.1.1,HP-SN-SWITCH-GROUP-MIB::snFdpInterfaceEntry,,not-accessible,snFdpInterfaceIfIndex,mandatory,,An entry in the snFdpInterfaceTable, having the status of FDP on an interface.
.1.3.6.1.4.1.11.2.3.7.11.12.1.3.20.1.1.1.1.1,HP-SN-SWITCH-GROUP-MIB::snFdpInterfaceIfIndex,INTEGER,not-accessible,,mandatory,,ifIndex value of the local interface.
.1.3.6.1.4.1.11.2.3.7.11.12.1.3.20.1.1.1.1.2,HP-SN-SWITCH-GROUP-MIB::snFdpInterfaceFdpEnable,INTEGER,read-write,,mandatory,false(0):true(1),The flag, whether the Foundry Discovery Protocol is currently running on this interface. It has no effect when FDP is disabled (snFdpGlobalRun = FALSE).
.1.3.6.1.4.1.11.2.3.7.11.12.1.3.20.1.1.1.1.3,HP-SN-SWITCH-GROUP-MIB::snFdpInterfaceCdpEnable,INTEGER,read-write,,mandatory,false(0):true(1),The flag, whether the Cisco Discovery Protocol is currently running on this interface. It has no effect when CDP is disabled (snCdpGlobalRun = FALSE).
.1.3.6.1.4.1.11.2.3.7.11.12.1.3.20.1.2,HP-SN-SWITCH-GROUP-MIB::snFdpCache,,,,,,
.1.3.6.1.4.1.11.2.3.7.11.12.1.3.20.1.2.1,HP-SN-SWITCH-GROUP-MIB::snFdpCacheTable,,not-accessible,,mandatory,,The table for the cached information obtained via receiving FDP/CDP messages.
.1.3.6.1.4.1.11.2.3.7.11.12.1.3.20.1.2.1.1,HP-SN-SWITCH-GROUP-MIB::snFdpCacheEntry,,not-accessible,snFdpCacheIfIndex:snFdpCacheDeviceIndex,mandatory,,An entry in the snFdpCacheTable, having the information  received via FDP/CDP on one interface from one device.  Entries appear when a FDP/CDP advertisement is received from a neighbor device. Entries disappear when FDP/CDP is disabled on the interface, or globally.
.1.3.6.1.4.1.11.2.3.7.11.12.1.3.20.1.2.1.1.1,HP-SN-SWITCH-GROUP-MIB::snFdpCacheIfIndex,INTEGER,not-accessible,,mandatory,,ifIndex value of the local interface.
.1.3.6.1.4.1.11.2.3.7.11.12.1.3.20.1.2.1.1.2,HP-SN-SWITCH-GROUP-MIB::snFdpCacheDeviceIndex,INTEGER,not-accessible,,mandatory,,Identification of a device, which sent FDP/CDP messages
.1.3.6.1.4.1.11.2.3.7.11.12.1.3.20.1.2.1.1.3,HP-SN-SWITCH-GROUP-MIB::snFdpCacheDeviceId,OCTET,read-only,,mandatory,,The Device-ID string as reported in the most recent FDP/CDP message. The zero-length string indicates no Device-ID field (TLV) was reported in the most recent FDP/CDP message.
.1.3.6.1.4.1.11.2.3.7.11.12.1.3.20.1.2.1.1.4,HP-SN-SWITCH-GROUP-MIB::snFdpCacheAddressType,INTEGER,read-only,,mandatory,ip(1):ipx(2):appletalk(3),An indication of the type of address contained in the corresponding instance of snFdpCacheAddress.
.1.3.6.1.4.1.11.2.3.7.11.12.1.3.20.1.2.1.1.5,HP-SN-SWITCH-GROUP-MIB::snFdpCacheAddress,OCTET,read-only,,mandatory,,The (first) network-layer address of the device as reported in the most recent FDP/CDP message IP address: 4 octets, ip(1) IPX address: 10 octets, ipx(2) First 4-octet as the network number Second 6-octet as the host number Appletalk address: 3 octets, appletalk(3) First 2-octet as the network number Second 1-octet as the host number
.1.3.6.1.4.1.11.2.3.7.11.12.1.3.20.1.2.1.1.6,HP-SN-SWITCH-GROUP-MIB::snFdpCacheVersion,OCTET,read-only,,mandatory,,Version string as reported in the most recent FDP/CDP message. 
.1.3.6.1.4.1.11.2.3.7.11.12.1.3.20.1.2.1.1.7,HP-SN-SWITCH-GROUP-MIB::snFdpCacheDevicePort,OCTET,read-only,,mandatory,,The Port-ID string as reported in the most recent FDP/CDP message. This will typically be the value of the ifName object (e.g., Ethernet0). The zero-length string indicates no Port-ID field (TLV) was reported in the most recent FDP/CDP message.
.1.3.6.1.4.1.11.2.3.7.11.12.1.3.20.1.2.1.1.8,HP-SN-SWITCH-GROUP-MIB::snFdpCachePlatform,OCTET,read-only,,mandatory,,The Device's Hardware Platform as reported in the most recent FDP/CDP message. The zero-length string indicates that no Platform field (TLV) was reported in the most recent FDP/CDP message.
.1.3.6.1.4.1.11.2.3.7.11.12.1.3.20.1.2.1.1.9,HP-SN-SWITCH-GROUP-MIB::snFdpCacheCapabilities,OCTET,read-only,,mandatory,,The Device's Functional Capabilities as reported in the most recent FDP/CDP message. 
.1.3.6.1.4.1.11.2.3.7.11.12.1.3.20.1.2.1.1.10,HP-SN-SWITCH-GROUP-MIB::snFdpCacheVendorId,INTEGER,read-only,,mandatory,fdp(1):cdp(2),Indicates the entry received by either FDP or CDP.
.1.3.6.1.4.1.11.2.3.7.11.12.1.3.20.1.2.1.1.11,HP-SN-SWITCH-GROUP-MIB::snFdpCacheIsAggregateVlan,INTEGER,read-only,,mandatory,false(0):true(1),Neighbor device is in aggregated-vlan.
.1.3.6.1.4.1.11.2.3.7.11.12.1.3.20.1.2.1.1.12,HP-SN-SWITCH-GROUP-MIB::snFdpCacheTagType,INTEGER,read-only,,mandatory,,Neighbor device tag-type.
.1.3.6.1.4.1.11.2.3.7.11.12.1.3.20.1.2.1.1.13,HP-SN-SWITCH-GROUP-MIB::snFdpCachePortVlanMask,OCTET,read-only,,mandatory,,Neighbor device port VLAN masks in 512-byte octet string.
.1.3.6.1.4.1.11.2.3.7.11.12.1.3.20.1.2.1.1.14,HP-SN-SWITCH-GROUP-MIB::snFdpCachePortTagMode,INTEGER,read-only,,mandatory,untagged(1):tagged(2):dual(3),Neighbor device port tag mode
.1.3.6.1.4.1.11.2.3.7.11.12.1.3.20.1.2.1.1.15,HP-SN-SWITCH-GROUP-MIB::snFdpCacheDefaultTrafficeVlanIdForDualMode,INTEGER,read-only,,mandatory,,Default traffic vlan id for neighbor device dual-mode port
.1.3.6.1.4.1.11.2.3.7.11.12.1.3.20.1.3,HP-SN-SWITCH-GROUP-MIB::snFdpGlobal,,,,,,
.1.3.6.1.4.1.11.2.3.7.11.12.1.3.20.1.3.1,HP-SN-SWITCH-GROUP-MIB::snFdpGlobalRun,INTEGER,read-write,,mandatory,false(0):true(1),The flag, whether the Foundry Discovery Protocol is currently running. FDP entries in snFdpCacheTable are deleted when FDP is disabled.
.1.3.6.1.4.1.11.2.3.7.11.12.1.3.20.1.3.2,HP-SN-SWITCH-GROUP-MIB::snFdpGlobalMessageInterval,INTEGER,read-write,,mandatory,,The interval at which FDP messages are to be generated. The default value is 60 seconds.
.1.3.6.1.4.1.11.2.3.7.11.12.1.3.20.1.3.3,HP-SN-SWITCH-GROUP-MIB::snFdpGlobalHoldTime,INTEGER,read-write,,mandatory,,The time for the receiving device holds FDP message. The default value is 180 seconds.
.1.3.6.1.4.1.11.2.3.7.11.12.1.3.20.1.3.4,HP-SN-SWITCH-GROUP-MIB::snFdpGlobalCdpRun,INTEGER,read-write,,mandatory,false(0):true(1),An indication of whether the Cisco Discovery Protocol is currently running. CDP entries in snFdpCacheTable are deleted when CDP is disabled.
.1.3.6.1.4.1.11.2.3.7.11.12.1.3.20.1.4,HP-SN-SWITCH-GROUP-MIB::snFdpCachedAddr,,,,,,
.1.3.6.1.4.1.11.2.3.7.11.12.1.3.20.1.4.1,HP-SN-SWITCH-GROUP-MIB::snFdpCachedAddressTable,,not-accessible,,mandatory,,Cached address table from receiving FDP/CDP messages.
.1.3.6.1.4.1.11.2.3.7.11.12.1.3.20.1.4.1.1,HP-SN-SWITCH-GROUP-MIB::snFdpCachedAddressEntry,,not-accessible,snFdpCachedAddrIfIndex:snFdpCachedAddrDeviceIndex:snFdpCachedAddrDeviceAddrEntryIndex,mandatory,,An entry (conceptual row) in the snFdpCacheAddressTable, containing one cached address from FDP/CDP messages.
.1.3.6.1.4.1.11.2.3.7.11.12.1.3.20.1.4.1.1.1,HP-SN-SWITCH-GROUP-MIB::snFdpCachedAddrIfIndex,INTEGER,not-accessible,,mandatory,,The ifIndex value of the local interface.
.1.3.6.1.4.1.11.2.3.7.11.12.1.3.20.1.4.1.1.2,HP-SN-SWITCH-GROUP-MIB::snFdpCachedAddrDeviceIndex,INTEGER,not-accessible,,mandatory,,A unique vlaue for each device from which FDP/CDP messages
.1.3.6.1.4.1.11.2.3.7.11.12.1.3.20.1.4.1.1.3,HP-SN-SWITCH-GROUP-MIB::snFdpCachedAddrDeviceAddrEntryIndex,INTEGER,not-accessible,,mandatory,,A unique vlaue for address entry in device from which FDP/CDP messages
.1.3.6.1.4.1.11.2.3.7.11.12.1.3.20.1.4.1.1.4,HP-SN-SWITCH-GROUP-MIB::snFdpCachedAddrType,INTEGER,read-only,,mandatory,ip(1):ipx(2):appletalk(3),An indication of the type of address contained in the corresponding instance of snFdpCacheAddrValue.
.1.3.6.1.4.1.11.2.3.7.11.12.1.3.20.1.4.1.1.5,HP-SN-SWITCH-GROUP-MIB::snFdpCachedAddrValue,OCTET,read-only,,mandatory,,The network-layer address of the device SNMP-agent as reported in the most recent FDP/CDP message IP address: 4 octets, ip(1) IPX address: 10 octets, ipx(2) First 4-octet as the network number Second 6-octet as the host number Appletalk address: 3 octets, appletalk(3) First 2-octet as the network number Second 1-octet as the host number
.1.3.6.1.4.1.11.2.3.7.11.12.1.3.21,HP-SN-SWITCH-GROUP-MIB::snVsrp,,,,,,
.1.3.6.1.4.1.11.2.3.7.11.12.1.3.21.1,HP-SN-VSRP-MIB::snVsrpGlobal,,,,,,
.1.3.6.1.4.1.11.2.3.7.11.12.1.3.21.1.1,HP-SN-VSRP-MIB::snVsrpGroupOperModeVsrp,INTEGER,read-write,,mandatory,disabled(0):enabled(1),The VSRP is configured on this system either enabled or  disabled and thedefault is disabled mode.
.1.3.6.1.4.1.11.2.3.7.11.12.1.3.21.1.2,HP-SN-VSRP-MIB::snVsrpIfStateChangeTrap,INTEGER,read-write,,mandatory,disabled(0):enabled(1),Indicates whether the SNMP agent process is
.1.3.6.1.4.1.11.2.3.7.11.12.1.3.21.1.3,HP-SN-VSRP-MIB::snVsrpIfMaxNumVridPerIntf,INTEGER,read-only,,mandatory,,Indicates the maximum number of VRID per interface.
.1.3.6.1.4.1.11.2.3.7.11.12.1.3.21.1.4,HP-SN-VSRP-MIB::snVsrpIfMaxNumVridPerSystem,INTEGER,read-only,,mandatory,,Indicates the maximum number of VRID per system.
.1.3.6.1.4.1.11.2.3.7.11.12.1.3.21.1.5,HP-SN-VSRP-MIB::snVsrpClearVrrpStat,INTEGER,read-write,,mandatory,normal(0):clear(1),Clear VSRP statistics command.
.1.3.6.1.4.1.11.2.3.7.11.12.1.3.21.2,HP-SN-VSRP-MIB::snVsrpIfIntf,,,,,,
.1.3.6.1.4.1.11.2.3.7.11.12.1.3.21.2.1,HP-SN-VSRP-MIB::snVsrpIfTable,,not-accessible,,mandatory,,The VSRP Interface Table describes the interfaces from the viewpoint of VSRP.
.1.3.6.1.4.1.11.2.3.7.11.12.1.3.21.2.1.1,HP-SN-VSRP-MIB::snVsrpIfEntry,,not-accessible,snVsrpIfVlanId,mandatory,,The VSRP Interface Entry describes one interface from the viewpoint of VSRP.
.1.3.6.1.4.1.11.2.3.7.11.12.1.3.21.2.1.1.1,HP-SN-VSRP-MIB::snVsrpIfVlanId,INTEGER,read-only,,mandatory,,Vlan index.
.1.3.6.1.4.1.11.2.3.7.11.12.1.3.21.2.1.1.2,HP-SN-VSRP-MIB::snVsrpIfAuthType,INTEGER,read-write,,mandatory,noAuth(0):simpleTextPasswd(1):ipAuthHeader(2),The authentication type of this interface.
.1.3.6.1.4.1.11.2.3.7.11.12.1.3.21.2.1.1.3,HP-SN-VSRP-MIB::snVsrpIfAuthPassword,OCTET,read-write,,mandatory,,The simple text password is allowed if only if  the snVsrpIfAuthType type is simpleTextPasswd.
.1.3.6.1.4.1.11.2.3.7.11.12.1.3.21.3,HP-SN-VSRP-MIB::snVsrpVirRtr,,,,,,
.1.3.6.1.4.1.11.2.3.7.11.12.1.3.21.3.1,HP-SN-VSRP-MIB::snVsrpVirRtrTable,,not-accessible,,mandatory,,The vsrp virtual router Entry describes one virtual router from the viewpoint of vsrp.
.1.3.6.1.4.1.11.2.3.7.11.12.1.3.21.3.1.1,HP-SN-VSRP-MIB::snVsrpVirRtrEntry,,not-accessible,snVsrpVirRtrVlanId:snVsrpVirRtrId,mandatory,,The vsrp virtual router Entry describes one virtual router from the viewpoint of vsrp.
.1.3.6.1.4.1.11.2.3.7.11.12.1.3.21.3.1.1.1,HP-SN-VSRP-MIB::snVsrpVirRtrVlanId,INTEGER,read-only,,mandatory,,Vlan index.
.1.3.6.1.4.1.11.2.3.7.11.12.1.3.21.3.1.1.2,HP-SN-VSRP-MIB::snVsrpVirRtrId,INTEGER,read-only,,mandatory,,One of the virtual router ID of this vsrp interface.
.1.3.6.1.4.1.11.2.3.7.11.12.1.3.21.3.1.1.3,HP-SN-VSRP-MIB::snVsrpVirRtrOwnership,INTEGER,read-write,,mandatory,incomplete(0):owner(1):backup(2),The ownership of this vsrp router interface  can be set to backup(2).  VirRtr SNMP-GET returns incomplete(0), it means  no IP address has assigned to this vsrp router interface.
.1.3.6.1.4.1.11.2.3.7.11.12.1.3.21.3.1.1.4,HP-SN-VSRP-MIB::snVsrpVirRtrCfgPriority,INTEGER,read-write,,mandatory,,The higher the number the higher the priority is. This parameter decides which backup router should becomes the Active Router for the interface. A backup Router with higher priority selected to becomes the Active Router. Therefore, this Object can be set if only if snVsrpVirRtrOwnership is set to backup(2).
.1.3.6.1.4.1.11.2.3.7.11.12.1.3.21.3.1.1.5,HP-SN-VSRP-MIB::snVsrpVirRtrTrackPriority,INTEGER,read-write,,mandatory,,The higher the number the higher the priority is. after this object is configured, the snVsrpVirRtrCurrPriority  of this interface will be adjusted dynamically with this changes from UP to DOWN.
.1.3.6.1.4.1.11.2.3.7.11.12.1.3.21.3.1.1.6,HP-SN-VSRP-MIB::snVsrpVirRtrCurrPriority,INTEGER,read-only,,mandatory,,The higher the number the higher the priority is. This object will be adjusted dynamically with the changes from UP to DOWN.
.1.3.6.1.4.1.11.2.3.7.11.12.1.3.21.3.1.1.7,HP-SN-VSRP-MIB::snVsrpVirRtrHelloInt,INTEGER,read-write,,mandatory,,Time interval between advertisements (seconds).
.1.3.6.1.4.1.11.2.3.7.11.12.1.3.21.3.1.1.8,HP-SN-VSRP-MIB::snVsrpVirRtrDeadInt,INTEGER,read-write,,mandatory,,Dead interval (seconds).
.1.3.6.1.4.1.11.2.3.7.11.12.1.3.21.3.1.1.9,HP-SN-VSRP-MIB::snVsrpVirRtrPreemptMode,INTEGER,read-write,,mandatory,disabled(0):enabled(1),This mode controls whether a higher priority Backup router preempts a lower priority Master. The mode with enabled(1) allow preemption and disabled(0) prohibit preemption.
.1.3.6.1.4.1.11.2.3.7.11.12.1.3.21.3.1.1.10,HP-SN-VSRP-MIB::snVsrpVirRtrState,INTEGER,read-only,,mandatory,init(0):master(1):backup(2),This object specifies the vsrp Router's interface state as: init(0)...initialization state. master(1)...master state. backup(2)...backup state.
.1.3.6.1.4.1.11.2.3.7.11.12.1.3.21.3.1.1.11,HP-SN-VSRP-MIB::snVsrpVirRtrIpAddrMask,OCTET,read-write,,mandatory,,The numbers of IP Addresses of this virtual router of this  interface, this holds good for L3 vsrp.
.1.3.6.1.4.1.11.2.3.7.11.12.1.3.21.3.1.1.12,HP-SN-VSRP-MIB::snVsrpVirRtrActivate,INTEGER,read-write,,mandatory,disabled(0):enabled(1),This object specifies the vsrp Router's activate command as: disabled(0)...deactivate this vsrp Router. enabled(1)....activate this vsrp Router.
.1.3.6.1.4.1.11.2.3.7.11.12.1.3.21.3.1.1.13,HP-SN-VSRP-MIB::snVsrpVirRtrTrackPortList,OCTET,read-write,,mandatory,,This object specifies the identity of the physical port and virtual ports Encoding and decoding scheme is range based: Each range prefix with 0000 (2 octets) where 0000 is not valid  ifIndex. Next 2 octets indicates lower range ifIndex, followed by 2  octets of higher range ifIndex. Individual(non range) ones will be displayed as it is. Ex: port list: 0001..0005 0015 0032..0047 Port list in PDU: 0000 0001 0005 000f 0000 0020 002f. The interface's Preference Level is reduced by value of  Preference Level parameter when the Track Port states first changes from UP to DOWN. When the Track Port next comes up the interface's Preference Level is increased by the amount specified by the Preference Level. The router VSRP physical track port membership.
.1.3.6.1.4.1.11.2.3.7.11.12.1.3.21.3.1.1.14,HP-SN-VSRP-MIB::snVsrpVirRtrAdvertiseBackup,INTEGER,read-write,,mandatory,disabled(0):enabled(1),Set Advertise this backup router to master 
.1.3.6.1.4.1.11.2.3.7.11.12.1.3.21.3.1.1.15,HP-SN-VSRP-MIB::snVsrpVirRtrHoldDownInt,INTEGER,read-write,,mandatory,,VSRP protection mechanism, an extra delay for a switch in backup mode to upgrade itself to master mode
.1.3.6.1.4.1.11.2.3.7.11.12.1.3.21.3.1.1.16,HP-SN-VSRP-MIB::snVsrpVirRtrInitTtl,INTEGER,read-write,,mandatory,,VSRP:TTL in the hello packet to regulate the distance that a hello packet  can travel. It prevents the flooding of VSRP hello packets in the network
.1.3.6.1.4.1.11.2.3.7.11.12.1.3.21.3.1.1.17,HP-SN-VSRP-MIB::snVsrpVirRtrIncPortList,OCTET,read-write,,mandatory,,Include all free ports of the VLAN into its control ports
.1.3.6.1.4.1.11.2.3.7.11.12.1.3.21.3.1.1.18,HP-SN-VSRP-MIB::snVsrpVirRtrSave,INTEGER,read-write,,mandatory,disabled(0):enabled(1),Set VSRP to save current parameters value
.1.3.6.1.4.1.11.2.3.7.11.12.1.3.21.3.1.1.19,HP-SN-VSRP-MIB::snVsrpVirRtrBackupInt,INTEGER,read-write,,mandatory,,Time interval between backup routers hello message advertisements (seconds).
.1.3.6.1.4.1.11.2.3.7.11.12.1.3.21.3.1.1.20,HP-SN-VSRP-MIB::snVsrpVirRtrRowStatus,INTEGER,read-write,,mandatory,invalid(1):valid(2):delete(3):create(4):modify(5),This object is used to create and rendering it inoperative..
.1.3.6.1.4.1.11.2.3.7.11.12.1.3.21.3.1.1.21,HP-SN-VSRP-MIB::snVsrpVirRtrRxArpPktDropCnts,Counter32,read-only,,mandatory,,The received vsrp ARP Packet Drop Counts.
.1.3.6.1.4.1.11.2.3.7.11.12.1.3.21.3.1.1.22,HP-SN-VSRP-MIB::snVsrpVirRtrRxIpPktDropCnts,Counter32,read-only,,mandatory,,The received VSRP IP Packet Drop Counts.
.1.3.6.1.4.1.11.2.3.7.11.12.1.3.21.3.1.1.23,HP-SN-VSRP-MIB::snVsrpVirRtrRxPortMismatchCnts,Counter32,read-only,,mandatory,,The received vsrp Port mismatching Counts.
.1.3.6.1.4.1.11.2.3.7.11.12.1.3.21.3.1.1.24,HP-SN-VSRP-MIB::snVsrpVirRtrRxNumOfIpMismatchCnts,Counter32,read-only,,mandatory,,The received VSRP Number of IP Addresses mismatching Counts.
.1.3.6.1.4.1.11.2.3.7.11.12.1.3.21.3.1.1.25,HP-SN-VSRP-MIB::snVsrpVirRtrRxIpMismatchCnts,Counter32,read-only,,mandatory,,The received vsrp IP Address mismatching Counts.
.1.3.6.1.4.1.11.2.3.7.11.12.1.3.21.3.1.1.26,HP-SN-VSRP-MIB::snVsrpVirRtrRxHelloIntMismatchCnts,Counter32,read-only,,mandatory,,The counts of the virtual router interface with hello interval mismatch counts.
.1.3.6.1.4.1.11.2.3.7.11.12.1.3.21.3.1.1.27,HP-SN-VSRP-MIB::snVsrpVirRtrRxPriorityZeroFromMasterCnts,Counter32,read-only,,mandatory,,The counts of the virtual router interface with Priority zero from the master.
.1.3.6.1.4.1.11.2.3.7.11.12.1.3.21.3.1.1.28,HP-SN-VSRP-MIB::snVsrpVirRtrRxHigherPriorityCnts,Counter32,read-only,,mandatory,,The counts of the virtual router interface with higher Priority.
.1.3.6.1.4.1.11.2.3.7.11.12.1.3.21.3.1.1.29,HP-SN-VSRP-MIB::snVsrpVirRtrTransToMasterStateCnts,Counter32,read-only,,mandatory,,The counts of the virtual router interface transition to master state.
.1.3.6.1.4.1.11.2.3.7.11.12.1.3.21.3.1.1.30,HP-SN-VSRP-MIB::snVsrpVirRtrTransToBackupStateCnts,Counter32,read-only,,mandatory,,The counts of the virtual router interface transition to backup state.
.1.3.6.1.4.1.11.2.3.7.11.12.1.3.21.3.1.1.31,HP-SN-VSRP-MIB::snVsrpVirRtrCurrDeadInt,INTEGER,read-only,,mandatory,,Current Dead interval (in 100 milliseconds).
.1.3.6.1.4.1.11.2.3.7.11.12.1.3.21.3.1.1.32,HP-SN-VSRP-MIB::snVsrpVirRtrCurHelloInt,INTEGER,read-only,,mandatory,,Set backup router hello interval
.1.3.6.1.4.1.11.2.3.7.11.12.1.3.21.3.1.1.33,HP-SN-VSRP-MIB::snVsrpVirRtrCurHoldDownInt,INTEGER,read-only,,mandatory,,VSRP protection mechanism, an extra delay for a switch in backup mode to upgrade itself to master mode
.1.3.6.1.4.1.11.2.3.7.11.12.1.3.21.3.1.1.34,HP-SN-VSRP-MIB::snVsrpVirRtrCurInitTtl,INTEGER,read-only,,mandatory,,VSRP:TTL in the hello packet to regulate the distance that a hello packet  can travel. It prevents the flooding of VSRP hello packets in the network
.1.3.6.1.4.1.11.2.3.7.11.12.1.3.21.3.1.1.35,HP-SN-VSRP-MIB::snVsrpVirRtrHelloMacAddress,OCTET,read-only,,mandatory,,Hello MAC address.
.1.3.6.1.4.1.11.2.3.7.11.12.1.3.21.3.1.1.36,HP-SN-VSRP-MIB::snVsrpVirRtrMasterIpAddr,IpAddress,read-only,,mandatory,,The master router's real/virtual (primary) IP address. This is the IP address listed as the source in vsrp advertisement last received by this virtual router.
.1.3.6.1.4.1.11.2.3.7.11.12.1.4,HP-SN-ROOT-MIB::snL4,,,,,,
.1.3.6.1.4.1.11.2.3.7.11.12.1.4.1,HP-SN-SW-L4-SWITCH-GROUP-MIB::snL4Gen,,,,,,
.1.3.6.1.4.1.11.2.3.7.11.12.1.4.1.1,HP-SN-SW-L4-SWITCH-GROUP-MIB::snL4MaxSessionLimit,INTEGER,read-write,,mandatory,,numbers of maximum session (L4 cache) entries
.1.3.6.1.4.1.11.2.3.7.11.12.1.4.1.2,HP-SN-SW-L4-SWITCH-GROUP-MIB::snL4TcpSynLimit,INTEGER,read-write,,mandatory,,Numbers of connection per second
.1.3.6.1.4.1.11.2.3.7.11.12.1.4.1.3,HP-SN-SW-L4-SWITCH-GROUP-MIB::snL4slbGlobalSDAType,INTEGER,read-write,,mandatory,leastconnection(1):roundrobin(2):weighted(3),Global Session Distribution Algorithm(SDA)
.1.3.6.1.4.1.11.2.3.7.11.12.1.4.1.4,HP-SN-SW-L4-SWITCH-GROUP-MIB::snL4slbTotalConnections,Counter32,read-only,,mandatory,,Total connections in this device
.1.3.6.1.4.1.11.2.3.7.11.12.1.4.1.5,HP-SN-SW-L4-SWITCH-GROUP-MIB::snL4slbLimitExceeds,INTEGER,read-only,,mandatory,,exceeds snL4TCPSynLimit (numbers of connection per second)
.1.3.6.1.4.1.11.2.3.7.11.12.1.4.1.6,HP-SN-SW-L4-SWITCH-GROUP-MIB::snL4slbForwardTraffic,Counter32,read-only,,mandatory,,Client->Server
.1.3.6.1.4.1.11.2.3.7.11.12.1.4.1.7,HP-SN-SW-L4-SWITCH-GROUP-MIB::snL4slbReverseTraffic,Counter32,read-only,,mandatory,,Server->Client
.1.3.6.1.4.1.11.2.3.7.11.12.1.4.1.8,HP-SN-SW-L4-SWITCH-GROUP-MIB::snL4slbDrops,INTEGER,read-only,,mandatory,,
.1.3.6.1.4.1.11.2.3.7.11.12.1.4.1.9,HP-SN-SW-L4-SWITCH-GROUP-MIB::snL4slbDangling,INTEGER,read-only,,mandatory,,
.1.3.6.1.4.1.11.2.3.7.11.12.1.4.1.10,HP-SN-SW-L4-SWITCH-GROUP-MIB::snL4slbDisableCount,INTEGER,read-only,,mandatory,,
.1.3.6.1.4.1.11.2.3.7.11.12.1.4.1.11,HP-SN-SW-L4-SWITCH-GROUP-MIB::snL4slbAged,INTEGER,read-only,,mandatory,,
.1.3.6.1.4.1.11.2.3.7.11.12.1.4.1.12,HP-SN-SW-L4-SWITCH-GROUP-MIB::snL4slbFinished,INTEGER,read-only,,mandatory,,FIN_or_RST
.1.3.6.1.4.1.11.2.3.7.11.12.1.4.1.13,HP-SN-SW-L4-SWITCH-GROUP-MIB::snL4FreeSessionCount,INTEGER,read-only,,mandatory,,Maximum sessions - used sessions
.1.3.6.1.4.1.11.2.3.7.11.12.1.4.1.14,HP-SN-SW-L4-SWITCH-GROUP-MIB::snL4BackupInterface,INTEGER,read-write,,mandatory,,backup monitoring port
.1.3.6.1.4.1.11.2.3.7.11.12.1.4.1.15,HP-SN-SW-L4-SWITCH-GROUP-MIB::snL4BackupMacAddr,OCTET,read-write,,mandatory,,Associated MAC address for backup monitoring port
.1.3.6.1.4.1.11.2.3.7.11.12.1.4.1.16,HP-SN-SW-L4-SWITCH-GROUP-MIB::snL4Active,INTEGER,read-only,,mandatory,false(0):true(1),
.1.3.6.1.4.1.11.2.3.7.11.12.1.4.1.17,HP-SN-SW-L4-SWITCH-GROUP-MIB::snL4Redundancy,INTEGER,read-only,,mandatory,,
.1.3.6.1.4.1.11.2.3.7.11.12.1.4.1.18,HP-SN-SW-L4-SWITCH-GROUP-MIB::snL4Backup,INTEGER,read-only,,mandatory,false(0):true(1),true->StandBy,false->active
.1.3.6.1.4.1.11.2.3.7.11.12.1.4.1.19,HP-SN-SW-L4-SWITCH-GROUP-MIB::snL4BecomeActive,INTEGER,read-only,,mandatory,,How many times this device become active
.1.3.6.1.4.1.11.2.3.7.11.12.1.4.1.20,HP-SN-SW-L4-SWITCH-GROUP-MIB::snL4BecomeStandBy,INTEGER,read-only,,mandatory,,How many times this device become standby
.1.3.6.1.4.1.11.2.3.7.11.12.1.4.1.21,HP-SN-SW-L4-SWITCH-GROUP-MIB::snL4BackupState,INTEGER,read-only,,mandatory,slbSyncComplete(0):slbSyncReqMap(1):slbSyncreqMac(2):slbSyncreqServers(3):slbSyncReqL4(4),Backup state
.1.3.6.1.4.1.11.2.3.7.11.12.1.4.1.22,HP-SN-SW-L4-SWITCH-GROUP-MIB::snL4NoPDUSent,INTEGER,read-only,,mandatory,,
.1.3.6.1.4.1.11.2.3.7.11.12.1.4.1.23,HP-SN-SW-L4-SWITCH-GROUP-MIB::snL4NoPDUCount,INTEGER,read-only,,mandatory,,
.1.3.6.1.4.1.11.2.3.7.11.12.1.4.1.24,HP-SN-SW-L4-SWITCH-GROUP-MIB::snL4NoPortMap,INTEGER,read-only,,mandatory,,
.1.3.6.1.4.1.11.2.3.7.11.12.1.4.1.25,HP-SN-SW-L4-SWITCH-GROUP-MIB::snL4unsuccessfulConn,INTEGER,read-only,,mandatory,,Unsuccessfull connection
.1.3.6.1.4.1.11.2.3.7.11.12.1.4.1.26,HP-SN-SW-L4-SWITCH-GROUP-MIB::snL4PingInterval,INTEGER,read-write,,mandatory,,Ping retries interval
.1.3.6.1.4.1.11.2.3.7.11.12.1.4.1.27,HP-SN-SW-L4-SWITCH-GROUP-MIB::snL4PingRetry,INTEGER,read-write,,mandatory,,Ping retries attempts
.1.3.6.1.4.1.11.2.3.7.11.12.1.4.1.28,HP-SN-SW-L4-SWITCH-GROUP-MIB::snL4TcpAge,INTEGER,read-write,,mandatory,,TCP reset age
.1.3.6.1.4.1.11.2.3.7.11.12.1.4.1.29,HP-SN-SW-L4-SWITCH-GROUP-MIB::snL4UdpAge,INTEGER,read-write,,mandatory,,UDP reset age
.1.3.6.1.4.1.11.2.3.7.11.12.1.4.1.30,HP-SN-SW-L4-SWITCH-GROUP-MIB::snL4EnableMaxSessionLimitReachedTrap,INTEGER,read-write,,mandatory,disabled(0):enabled(1),Enable/disable maximum number of connections reached trap.
.1.3.6.1.4.1.11.2.3.7.11.12.1.4.1.31,HP-SN-SW-L4-SWITCH-GROUP-MIB::snL4EnableTcpSynLimitReachedTrap,INTEGER,read-write,,mandatory,disabled(0):enabled(1),Enable/disable the number of TCP SYN limits reached trap.
.1.3.6.1.4.1.11.2.3.7.11.12.1.4.1.32,HP-SN-SW-L4-SWITCH-GROUP-MIB::snL4EnableRealServerUpTrap,INTEGER,read-write,,mandatory,disabled(0):enabled(1),Enable/disable the real server up trap.
.1.3.6.1.4.1.11.2.3.7.11.12.1.4.1.33,HP-SN-SW-L4-SWITCH-GROUP-MIB::snL4EnableRealServerDownTrap,INTEGER,read-write,,mandatory,disabled(0):enabled(1),Enable/disable the real server down trap.
.1.3.6.1.4.1.11.2.3.7.11.12.1.4.1.34,HP-SN-SW-L4-SWITCH-GROUP-MIB::snL4EnableRealServerPortUpTrap,INTEGER,read-write,,mandatory,disabled(0):enabled(1),Enable/disable the real server TCP port up trap.
.1.3.6.1.4.1.11.2.3.7.11.12.1.4.1.35,HP-SN-SW-L4-SWITCH-GROUP-MIB::snL4EnableRealServerPortDownTrap,INTEGER,read-write,,mandatory,disabled(0):enabled(1),Enable/disable the real server TCP port down trap.
.1.3.6.1.4.1.11.2.3.7.11.12.1.4.1.36,HP-SN-SW-L4-SWITCH-GROUP-MIB::snL4EnableRealServerMaxConnLimitReachedTrap,INTEGER,read-write,,mandatory,disabled(0):enabled(1),Enable/disable the real server maximum number of
.1.3.6.1.4.1.11.2.3.7.11.12.1.4.1.37,HP-SN-SW-L4-SWITCH-GROUP-MIB::snL4EnableBecomeStandbyTrap,INTEGER,read-write,,mandatory,disabled(0):enabled(1),Enable/disable trap of the server load balancing
.1.3.6.1.4.1.11.2.3.7.11.12.1.4.1.38,HP-SN-SW-L4-SWITCH-GROUP-MIB::snL4EnableBecomeActiveTrap,INTEGER,read-write,,mandatory,disabled(0):enabled(1),Enable/disable trap of the server load balancing
.1.3.6.1.4.1.11.2.3.7.11.12.1.4.1.39,HP-SN-SW-L4-SWITCH-GROUP-MIB::snL4slbRouterInterfacePortMask,INTEGER,read-write,,deprecated,,Router interface port mask.
.1.3.6.1.4.1.11.2.3.7.11.12.1.4.1.40,HP-SN-SW-L4-SWITCH-GROUP-MIB::snL4MaxNumWebCacheGroup,INTEGER,read-only,,mandatory,,The maximum number of server cache groups
.1.3.6.1.4.1.11.2.3.7.11.12.1.4.1.41,HP-SN-SW-L4-SWITCH-GROUP-MIB::snL4MaxNumWebCachePerGroup,INTEGER,read-only,,mandatory,,The maximum number of WEB Cache servers in each of web cache group
.1.3.6.1.4.1.11.2.3.7.11.12.1.4.1.42,HP-SN-SW-L4-SWITCH-GROUP-MIB::snL4WebCacheStateful,INTEGER,read-write,,mandatory,disabled(0):enabled(1),The WEB Cache servers cache-stateful
.1.3.6.1.4.1.11.2.3.7.11.12.1.4.1.43,HP-SN-SW-L4-SWITCH-GROUP-MIB::snL4EnableGslbHealthCheckIpUpTrap,INTEGER,read-write,,mandatory,disabled(0):enabled(1),Health check IP up.
.1.3.6.1.4.1.11.2.3.7.11.12.1.4.1.44,HP-SN-SW-L4-SWITCH-GROUP-MIB::snL4EnableGslbHealthCheckIpDownTrap,INTEGER,read-write,,mandatory,disabled(0):enabled(1),Health check IP down.
.1.3.6.1.4.1.11.2.3.7.11.12.1.4.1.45,HP-SN-SW-L4-SWITCH-GROUP-MIB::snL4EnableGslbHealthCheckIpPortUpTrap,INTEGER,read-write,,mandatory,disabled(0):enabled(1),Health check IP port up.
.1.3.6.1.4.1.11.2.3.7.11.12.1.4.1.46,HP-SN-SW-L4-SWITCH-GROUP-MIB::snL4EnableGslbHealthCheckIpPortDownTrap,INTEGER,read-write,,mandatory,disabled(0):enabled(1),Health check IP port down.
.1.3.6.1.4.1.11.2.3.7.11.12.1.4.1.47,HP-SN-SW-L4-SWITCH-GROUP-MIB::snL4EnableGslbRemoteGslbSiDownTrap,INTEGER,read-write,,mandatory,disabled(0):enabled(1),Connection to GSLB ServerIron is down.
.1.3.6.1.4.1.11.2.3.7.11.12.1.4.1.48,HP-SN-SW-L4-SWITCH-GROUP-MIB::snL4EnableGslbRemoteGslbSiUpTrap,INTEGER,read-write,,mandatory,disabled(0):enabled(1),Connection to GSLB ServerIron is up.
.1.3.6.1.4.1.11.2.3.7.11.12.1.4.1.49,HP-SN-SW-L4-SWITCH-GROUP-MIB::snL4EnableGslbRemoteSiDownTrap,INTEGER,read-write,,mandatory,disabled(0):enabled(1),GSLB connection to remote ServerIron is down.
.1.3.6.1.4.1.11.2.3.7.11.12.1.4.1.50,HP-SN-SW-L4-SWITCH-GROUP-MIB::snL4EnableGslbRemoteSiUpTrap,INTEGER,read-write,,mandatory,disabled(0):enabled(1),GSLB connection to remote ServerIron is up.
.1.3.6.1.4.1.11.2.3.7.11.12.1.4.1.51,HP-SN-SW-L4-SWITCH-GROUP-MIB::snL4slbRouterInterfacePortList,OCTET,read-write,,mandatory,,Router interface port list. Each port index is a 16-bit integer
.1.3.6.1.4.1.11.2.3.7.11.12.1.4.2,HP-SN-SW-L4-SWITCH-GROUP-MIB::snL4VirtualServer,,,,,,
.1.3.6.1.4.1.11.2.3.7.11.12.1.4.2.1,HP-SN-SW-L4-SWITCH-GROUP-MIB::snL4VirtualServerTable,,not-accessible,,mandatory,,Virtual Server table.
.1.3.6.1.4.1.11.2.3.7.11.12.1.4.2.1.1,HP-SN-SW-L4-SWITCH-GROUP-MIB::snL4VirtualServerEntry,,not-accessible,snL4VirtualServerIndex,mandatory,,An entry in L4 Virtual Server table.
.1.3.6.1.4.1.11.2.3.7.11.12.1.4.2.1.1.1,HP-SN-SW-L4-SWITCH-GROUP-MIB::snL4VirtualServerIndex,INTEGER,read-only,,mandatory,,The table index for a Virtual Server entry.
.1.3.6.1.4.1.11.2.3.7.11.12.1.4.2.1.1.2,HP-SN-SW-L4-SWITCH-GROUP-MIB::snL4VirtualServerName,OCTET,read-write,,mandatory,,Virtual server name.
.1.3.6.1.4.1.11.2.3.7.11.12.1.4.2.1.1.3,HP-SN-SW-L4-SWITCH-GROUP-MIB::snL4VirtualServerVirtualIP,IpAddress,read-write,,mandatory,,Virtual Server IP Address.
.1.3.6.1.4.1.11.2.3.7.11.12.1.4.2.1.1.4,HP-SN-SW-L4-SWITCH-GROUP-MIB::snL4VirtualServerAdminStatus,INTEGER,read-write,,mandatory,disabled(0):enabled(1),Virtual Server status is ether disabled(0) or enabled(1).
.1.3.6.1.4.1.11.2.3.7.11.12.1.4.2.1.1.5,HP-SN-SW-L4-SWITCH-GROUP-MIB::snL4VirtualServerSDAType,INTEGER,read-write,,mandatory,default(0):leastconnection(1):roundrobin(2):weighted(3),TCP/UDP Sessions Distribution Algorithms Type.
.1.3.6.1.4.1.11.2.3.7.11.12.1.4.2.1.1.6,HP-SN-SW-L4-SWITCH-GROUP-MIB::snL4VirtualServerRowStatus,INTEGER,read-write,,mandatory,other(1):valid(2):delete(3):create(4):modify(5),To create or delete a virtual server
.1.3.6.1.4.1.11.2.3.7.11.12.1.4.2.1.1.7,HP-SN-SW-L4-SWITCH-GROUP-MIB::snL4VirtualServerDeleteState,INTEGER,read-only,,mandatory,done(0):waitunbind(1):waitdelete(2),Delete operation state.
.1.3.6.1.4.1.11.2.3.7.11.12.1.4.3,HP-SN-SW-L4-SWITCH-GROUP-MIB::snL4RealServer,,,,,,
.1.3.6.1.4.1.11.2.3.7.11.12.1.4.3.1,HP-SN-SW-L4-SWITCH-GROUP-MIB::snL4RealServerTable,,not-accessible,,mandatory,,Real Server table.
.1.3.6.1.4.1.11.2.3.7.11.12.1.4.3.1.1,HP-SN-SW-L4-SWITCH-GROUP-MIB::snL4RealServerEntry,,not-accessible,snL4RealServerIndex,mandatory,,An entry in the Real Server table.
.1.3.6.1.4.1.11.2.3.7.11.12.1.4.3.1.1.1,HP-SN-SW-L4-SWITCH-GROUP-MIB::snL4RealServerIndex,INTEGER,read-only,,mandatory,,The table index for a Real Server entry.
.1.3.6.1.4.1.11.2.3.7.11.12.1.4.3.1.1.2,HP-SN-SW-L4-SWITCH-GROUP-MIB::snL4RealServerName,OCTET,read-write,,mandatory,,Real server name.
.1.3.6.1.4.1.11.2.3.7.11.12.1.4.3.1.1.3,HP-SN-SW-L4-SWITCH-GROUP-MIB::snL4RealServerIP,IpAddress,read-write,,mandatory,,Real Server IP Address.
.1.3.6.1.4.1.11.2.3.7.11.12.1.4.3.1.1.4,HP-SN-SW-L4-SWITCH-GROUP-MIB::snL4RealServerAdminStatus,INTEGER,read-write,,mandatory,disabled(0):enabled(1),Real Server status is ether disabled(0) or enabled(1).
.1.3.6.1.4.1.11.2.3.7.11.12.1.4.3.1.1.5,HP-SN-SW-L4-SWITCH-GROUP-MIB::snL4RealServerMaxConnections,INTEGER,read-write,,mandatory,,Real Server Maximum Connection allowed.
.1.3.6.1.4.1.11.2.3.7.11.12.1.4.3.1.1.6,HP-SN-SW-L4-SWITCH-GROUP-MIB::snL4RealServerWeight,INTEGER,read-write,,mandatory,,Real Server weight
.1.3.6.1.4.1.11.2.3.7.11.12.1.4.3.1.1.7,HP-SN-SW-L4-SWITCH-GROUP-MIB::snL4RealServerRowStatus,INTEGER,read-write,,mandatory,other(1):valid(2):delete(3):create(4):modify(5),To create or delete a real server entry.
.1.3.6.1.4.1.11.2.3.7.11.12.1.4.3.1.1.8,HP-SN-SW-L4-SWITCH-GROUP-MIB::snL4RealServerDeleteState,INTEGER,read-only,,mandatory,done(0):waitunbind(1):waitdelete(2),Delete operation state.
.1.3.6.1.4.1.11.2.3.7.11.12.1.4.4,HP-SN-SW-L4-SWITCH-GROUP-MIB::snL4VirtualServerPort,,,,,,
.1.3.6.1.4.1.11.2.3.7.11.12.1.4.4.1,HP-SN-SW-L4-SWITCH-GROUP-MIB::snL4VirtualServerPortTable,,not-accessible,,mandatory,,Virtual Server Port table.
.1.3.6.1.4.1.11.2.3.7.11.12.1.4.4.1.1,HP-SN-SW-L4-SWITCH-GROUP-MIB::snL4VirtualServerPortEntry,,not-accessible,snL4VirtualServerPortIndex,mandatory,,An entry in the Virtual Server Port table.
.1.3.6.1.4.1.11.2.3.7.11.12.1.4.4.1.1.1,HP-SN-SW-L4-SWITCH-GROUP-MIB::snL4VirtualServerPortIndex,INTEGER,read-only,,mandatory,,The index for Virtual Server Port entry.
.1.3.6.1.4.1.11.2.3.7.11.12.1.4.4.1.1.2,HP-SN-SW-L4-SWITCH-GROUP-MIB::snL4VirtualServerPortServerName,OCTET,read-write,,mandatory,,
.1.3.6.1.4.1.11.2.3.7.11.12.1.4.4.1.1.3,HP-SN-SW-L4-SWITCH-GROUP-MIB::snL4VirtualServerPortPort,INTEGER,read-write,,mandatory,,
.1.3.6.1.4.1.11.2.3.7.11.12.1.4.4.1.1.4,HP-SN-SW-L4-SWITCH-GROUP-MIB::snL4VirtualServerPortAdminStatus,INTEGER,read-write,,mandatory,disabled(0):enabled(1),
.1.3.6.1.4.1.11.2.3.7.11.12.1.4.4.1.1.5,HP-SN-SW-L4-SWITCH-GROUP-MIB::snL4VirtualServerPortSticky,INTEGER,read-write,,mandatory,disabled(0):enabled(1),
.1.3.6.1.4.1.11.2.3.7.11.12.1.4.4.1.1.6,HP-SN-SW-L4-SWITCH-GROUP-MIB::snL4VirtualServerPortConcurrent,INTEGER,read-write,,mandatory,disabled(0):enabled(1),
.1.3.6.1.4.1.11.2.3.7.11.12.1.4.4.1.1.7,HP-SN-SW-L4-SWITCH-GROUP-MIB::snL4VirtualServerPortRowStatus,INTEGER,read-write,,mandatory,other(1):valid(2):delete(3):create(4):modify(5),To create or delete a virtual server port entry.
.1.3.6.1.4.1.11.2.3.7.11.12.1.4.4.1.1.8,HP-SN-SW-L4-SWITCH-GROUP-MIB::snL4VirtualServerPortDeleteState,INTEGER,read-only,,mandatory,done(0):waitunbind(1):waitdelete(2),Delete operation state.
.1.3.6.1.4.1.11.2.3.7.11.12.1.4.5,HP-SN-SW-L4-SWITCH-GROUP-MIB::snL4RealServerPort,,,,,,
.1.3.6.1.4.1.11.2.3.7.11.12.1.4.5.1,HP-SN-SW-L4-SWITCH-GROUP-MIB::snL4RealServerPortTable,,not-accessible,,mandatory,,Real Server Port table.
.1.3.6.1.4.1.11.2.3.7.11.12.1.4.5.1.1,HP-SN-SW-L4-SWITCH-GROUP-MIB::snL4RealServerPortEntry,,not-accessible,snL4RealServerPortIndex,mandatory,,An entry in the Real Server Port table.
.1.3.6.1.4.1.11.2.3.7.11.12.1.4.5.1.1.1,HP-SN-SW-L4-SWITCH-GROUP-MIB::snL4RealServerPortIndex,INTEGER,read-only,,mandatory,,The index for Real Server Port entry.
.1.3.6.1.4.1.11.2.3.7.11.12.1.4.5.1.1.2,HP-SN-SW-L4-SWITCH-GROUP-MIB::snL4RealServerPortServerName,OCTET,read-write,,mandatory,,
.1.3.6.1.4.1.11.2.3.7.11.12.1.4.5.1.1.3,HP-SN-SW-L4-SWITCH-GROUP-MIB::snL4RealServerPortPort,INTEGER,read-write,,mandatory,,
.1.3.6.1.4.1.11.2.3.7.11.12.1.4.5.1.1.4,HP-SN-SW-L4-SWITCH-GROUP-MIB::snL4RealServerPortAdminStatus,INTEGER,read-write,,mandatory,disabled(0):enabled(1),
.1.3.6.1.4.1.11.2.3.7.11.12.1.4.5.1.1.5,HP-SN-SW-L4-SWITCH-GROUP-MIB::snL4RealServerPortRowStatus,INTEGER,read-write,,mandatory,other(1):valid(2):delete(3):create(4):modify(5),To create or delete a Real server port entry.
.1.3.6.1.4.1.11.2.3.7.11.12.1.4.5.1.1.6,HP-SN-SW-L4-SWITCH-GROUP-MIB::snL4RealServerPortDeleteState,INTEGER,read-only,,mandatory,done(0):waitunbind(1):waitdelete(2),Delete operation state.
.1.3.6.1.4.1.11.2.3.7.11.12.1.4.6,HP-SN-SW-L4-SWITCH-GROUP-MIB::snL4Bind,,,,,,
.1.3.6.1.4.1.11.2.3.7.11.12.1.4.6.1,HP-SN-SW-L4-SWITCH-GROUP-MIB::snL4BindTable,,not-accessible,,mandatory,,Bind table.
.1.3.6.1.4.1.11.2.3.7.11.12.1.4.6.1.1,HP-SN-SW-L4-SWITCH-GROUP-MIB::snL4BindEntry,,not-accessible,snL4BindIndex,mandatory,,An entry in the Bind table.
.1.3.6.1.4.1.11.2.3.7.11.12.1.4.6.1.1.1,HP-SN-SW-L4-SWITCH-GROUP-MIB::snL4BindIndex,INTEGER,read-only,,mandatory,,The index for Bind entry.
.1.3.6.1.4.1.11.2.3.7.11.12.1.4.6.1.1.2,HP-SN-SW-L4-SWITCH-GROUP-MIB::snL4BindVirtualServerName,OCTET,read-write,,mandatory,,
.1.3.6.1.4.1.11.2.3.7.11.12.1.4.6.1.1.3,HP-SN-SW-L4-SWITCH-GROUP-MIB::snL4BindVirtualPortNumber,INTEGER,read-write,,mandatory,,
.1.3.6.1.4.1.11.2.3.7.11.12.1.4.6.1.1.4,HP-SN-SW-L4-SWITCH-GROUP-MIB::snL4BindRealServerName,OCTET,read-write,,mandatory,,
.1.3.6.1.4.1.11.2.3.7.11.12.1.4.6.1.1.5,HP-SN-SW-L4-SWITCH-GROUP-MIB::snL4BindRealPortNumber,INTEGER,read-write,,mandatory,,
.1.3.6.1.4.1.11.2.3.7.11.12.1.4.6.1.1.6,HP-SN-SW-L4-SWITCH-GROUP-MIB::snL4BindRowStatus,INTEGER,read-write,,mandatory,other(1):valid(2):delete(3):create(4),To create or delete bind entry.
.1.3.6.1.4.1.11.2.3.7.11.12.1.4.7,HP-SN-SW-L4-SWITCH-GROUP-MIB::snL4VirtualServerStatus,,,,,,
.1.3.6.1.4.1.11.2.3.7.11.12.1.4.7.1,HP-SN-SW-L4-SWITCH-GROUP-MIB::snL4VirtualServerStatusTable,,not-accessible,,mandatory,,Virtual Server Status table.
.1.3.6.1.4.1.11.2.3.7.11.12.1.4.7.1.1,HP-SN-SW-L4-SWITCH-GROUP-MIB::snL4VirtualServerStatusEntry,,not-accessible,snL4VirtualServerStatusIndex,mandatory,,An entry in L4 Virtual Server Status table.
.1.3.6.1.4.1.11.2.3.7.11.12.1.4.7.1.1.1,HP-SN-SW-L4-SWITCH-GROUP-MIB::snL4VirtualServerStatusIndex,INTEGER,read-only,,mandatory,,The table index for a Virtual Server Status entry.
.1.3.6.1.4.1.11.2.3.7.11.12.1.4.7.1.1.2,HP-SN-SW-L4-SWITCH-GROUP-MIB::snL4VirtualServerStatusName,OCTET,read-only,,mandatory,,Virtual server name.
.1.3.6.1.4.1.11.2.3.7.11.12.1.4.7.1.1.3,HP-SN-SW-L4-SWITCH-GROUP-MIB::snL4VirtualServerStatusReceivePkts,Counter32,read-only,,mandatory,,
.1.3.6.1.4.1.11.2.3.7.11.12.1.4.7.1.1.4,HP-SN-SW-L4-SWITCH-GROUP-MIB::snL4VirtualServerStatusTransmitPkts,Counter32,read-only,,mandatory,,
.1.3.6.1.4.1.11.2.3.7.11.12.1.4.7.1.1.5,HP-SN-SW-L4-SWITCH-GROUP-MIB::snL4VirtualServerStatusTotalConnections,Counter32,read-only,,mandatory,,
.1.3.6.1.4.1.11.2.3.7.11.12.1.4.8,HP-SN-SW-L4-SWITCH-GROUP-MIB::snL4RealServerStatus,,,,,,
.1.3.6.1.4.1.11.2.3.7.11.12.1.4.8.1,HP-SN-SW-L4-SWITCH-GROUP-MIB::snL4RealServerStatusTable,,not-accessible,,mandatory,,Real Server Status table.
.1.3.6.1.4.1.11.2.3.7.11.12.1.4.8.1.1,HP-SN-SW-L4-SWITCH-GROUP-MIB::snL4RealServerStatusEntry,,not-accessible,snL4RealServerStatusIndex,mandatory,,An entry in the Real Server Status table.
.1.3.6.1.4.1.11.2.3.7.11.12.1.4.8.1.1.1,HP-SN-SW-L4-SWITCH-GROUP-MIB::snL4RealServerStatusIndex,INTEGER,read-only,,mandatory,,The table index for a Real Server Status entry.
.1.3.6.1.4.1.11.2.3.7.11.12.1.4.8.1.1.2,HP-SN-SW-L4-SWITCH-GROUP-MIB::snL4RealServerStatusName,OCTET,read-only,,mandatory,,
.1.3.6.1.4.1.11.2.3.7.11.12.1.4.8.1.1.3,HP-SN-SW-L4-SWITCH-GROUP-MIB::snL4RealServerStatusRealIP,IpAddress,read-only,,mandatory,,
.1.3.6.1.4.1.11.2.3.7.11.12.1.4.8.1.1.4,HP-SN-SW-L4-SWITCH-GROUP-MIB::snL4RealServerStatusReceivePkts,Counter32,read-only,,mandatory,,
.1.3.6.1.4.1.11.2.3.7.11.12.1.4.8.1.1.5,HP-SN-SW-L4-SWITCH-GROUP-MIB::snL4RealServerStatusTransmitPkts,Counter32,read-only,,mandatory,,
.1.3.6.1.4.1.11.2.3.7.11.12.1.4.8.1.1.6,HP-SN-SW-L4-SWITCH-GROUP-MIB::snL4RealServerStatusCurConnections,INTEGER,read-only,,mandatory,,
.1.3.6.1.4.1.11.2.3.7.11.12.1.4.8.1.1.7,HP-SN-SW-L4-SWITCH-GROUP-MIB::snL4RealServerStatusTotalConnections,Counter32,read-only,,mandatory,,
.1.3.6.1.4.1.11.2.3.7.11.12.1.4.8.1.1.8,HP-SN-SW-L4-SWITCH-GROUP-MIB::snL4RealServerStatusAge,INTEGER,read-only,,mandatory,,
.1.3.6.1.4.1.11.2.3.7.11.12.1.4.8.1.1.9,HP-SN-SW-L4-SWITCH-GROUP-MIB::snL4RealServerStatusState,INTEGER,read-only,,mandatory,serverdisabled(0):serverenabled(1):serverfailed(2):servertesting(3):serversuspect(4):servershutdown(5):serveractive(6),
.1.3.6.1.4.1.11.2.3.7.11.12.1.4.8.1.1.10,HP-SN-SW-L4-SWITCH-GROUP-MIB::snL4RealServerStatusReassignments,INTEGER,read-only,,mandatory,,
.1.3.6.1.4.1.11.2.3.7.11.12.1.4.8.1.1.11,HP-SN-SW-L4-SWITCH-GROUP-MIB::snL4RealServerStatusReassignmentLimit,INTEGER,read-only,,mandatory,,
.1.3.6.1.4.1.11.2.3.7.11.12.1.4.8.1.1.12,HP-SN-SW-L4-SWITCH-GROUP-MIB::snL4RealServerStatusFailedPortExists,INTEGER,read-only,,mandatory,,
.1.3.6.1.4.1.11.2.3.7.11.12.1.4.8.1.1.13,HP-SN-SW-L4-SWITCH-GROUP-MIB::snL4RealServerStatusFailTime,INTEGER,read-only,,mandatory,,
.1.3.6.1.4.1.11.2.3.7.11.12.1.4.8.1.1.14,HP-SN-SW-L4-SWITCH-GROUP-MIB::snL4RealServerStatusPeakConnections,INTEGER,read-only,,mandatory,,
.1.3.6.1.4.1.11.2.3.7.11.12.1.4.9,HP-SN-SW-L4-SWITCH-GROUP-MIB::snL4VirtualServerPortStatus,,,,,,
.1.3.6.1.4.1.11.2.3.7.11.12.1.4.9.1,HP-SN-SW-L4-SWITCH-GROUP-MIB::snL4VirtualServerPortStatusTable,,not-accessible,,mandatory,,Virtual Server Port Status table.
.1.3.6.1.4.1.11.2.3.7.11.12.1.4.9.1.1,HP-SN-SW-L4-SWITCH-GROUP-MIB::snL4VirtualServerPortStatusEntry,,not-accessible,snL4VirtualServerPortStatusIndex,mandatory,,An entry in the Virtual Server Port Status table.
.1.3.6.1.4.1.11.2.3.7.11.12.1.4.9.1.1.1,HP-SN-SW-L4-SWITCH-GROUP-MIB::snL4VirtualServerPortStatusIndex,INTEGER,read-only,,mandatory,,The index for Virtual Server Port Status entry.
.1.3.6.1.4.1.11.2.3.7.11.12.1.4.9.1.1.2,HP-SN-SW-L4-SWITCH-GROUP-MIB::snL4VirtualServerPortStatusPort,INTEGER,read-only,,mandatory,,
.1.3.6.1.4.1.11.2.3.7.11.12.1.4.9.1.1.3,HP-SN-SW-L4-SWITCH-GROUP-MIB::snL4VirtualServerPortStatusServerName,OCTET,read-only,,mandatory,,
.1.3.6.1.4.1.11.2.3.7.11.12.1.4.9.1.1.4,HP-SN-SW-L4-SWITCH-GROUP-MIB::snL4VirtualServerPortStatusCurrentConnection,INTEGER,read-only,,mandatory,,
.1.3.6.1.4.1.11.2.3.7.11.12.1.4.9.1.1.5,HP-SN-SW-L4-SWITCH-GROUP-MIB::snL4VirtualServerPortStatusTotalConnection,Counter32,read-only,,mandatory,,
.1.3.6.1.4.1.11.2.3.7.11.12.1.4.9.1.1.6,HP-SN-SW-L4-SWITCH-GROUP-MIB::snL4VirtualServerPortStatusPeakConnection,INTEGER,read-only,,mandatory,,
.1.3.6.1.4.1.11.2.3.7.11.12.1.4.10,HP-SN-SW-L4-SWITCH-GROUP-MIB::snL4RealServerPortStatus,,,,,,
.1.3.6.1.4.1.11.2.3.7.11.12.1.4.10.1,HP-SN-SW-L4-SWITCH-GROUP-MIB::snL4RealServerPortStatusTable,,not-accessible,,mandatory,,Real Server Port Status table.
.1.3.6.1.4.1.11.2.3.7.11.12.1.4.10.1.1,HP-SN-SW-L4-SWITCH-GROUP-MIB::snL4RealServerPortStatusEntry,,not-accessible,snL4RealServerPortStatusIndex,mandatory,,An entry in the Real Server Port Status table.
.1.3.6.1.4.1.11.2.3.7.11.12.1.4.10.1.1.1,HP-SN-SW-L4-SWITCH-GROUP-MIB::snL4RealServerPortStatusIndex,INTEGER,read-only,,mandatory,,The index for Real Server Port Status entry.
.1.3.6.1.4.1.11.2.3.7.11.12.1.4.10.1.1.2,HP-SN-SW-L4-SWITCH-GROUP-MIB::snL4RealServerPortStatusPort,INTEGER,read-only,,mandatory,,
.1.3.6.1.4.1.11.2.3.7.11.12.1.4.10.1.1.3,HP-SN-SW-L4-SWITCH-GROUP-MIB::snL4RealServerPortStatusServerName,OCTET,read-only,,mandatory,,
.1.3.6.1.4.1.11.2.3.7.11.12.1.4.10.1.1.4,HP-SN-SW-L4-SWITCH-GROUP-MIB::snL4RealServerPortStatusReassignCount,INTEGER,read-only,,mandatory,,
.1.3.6.1.4.1.11.2.3.7.11.12.1.4.10.1.1.5,HP-SN-SW-L4-SWITCH-GROUP-MIB::snL4RealServerPortStatusState,INTEGER,read-only,,mandatory,disabled(0):enabled(1):failed(2):testing(3):suspect(4):shutdown(5):active(6):unbound(7):awaitUnbind(8):awaitDelete(9),Real server port state
.1.3.6.1.4.1.11.2.3.7.11.12.1.4.10.1.1.6,HP-SN-SW-L4-SWITCH-GROUP-MIB::snL4RealServerPortStatusFailTime,INTEGER,read-only,,mandatory,,Only useful, if real server port state is failed.
.1.3.6.1.4.1.11.2.3.7.11.12.1.4.10.1.1.7,HP-SN-SW-L4-SWITCH-GROUP-MIB::snL4RealServerPortStatusCurrentConnection,INTEGER,read-only,,mandatory,,Real server port current connection
.1.3.6.1.4.1.11.2.3.7.11.12.1.4.10.1.1.8,HP-SN-SW-L4-SWITCH-GROUP-MIB::snL4RealServerPortStatusTotalConnection,Counter32,read-only,,mandatory,,Real server port total connection
.1.3.6.1.4.1.11.2.3.7.11.12.1.4.10.1.1.9,HP-SN-SW-L4-SWITCH-GROUP-MIB::snL4RealServerPortStatusRxPkts,Counter32,read-only,,mandatory,,Real server port receive packets.
.1.3.6.1.4.1.11.2.3.7.11.12.1.4.10.1.1.10,HP-SN-SW-L4-SWITCH-GROUP-MIB::snL4RealServerPortStatusTxPkts,Counter32,read-only,,mandatory,,Real server port transmit packets.
.1.3.6.1.4.1.11.2.3.7.11.12.1.4.10.1.1.11,HP-SN-SW-L4-SWITCH-GROUP-MIB::snL4RealServerPortStatusRxBytes,Counter32,read-only,,mandatory,,Real server port receive bytes.
.1.3.6.1.4.1.11.2.3.7.11.12.1.4.10.1.1.12,HP-SN-SW-L4-SWITCH-GROUP-MIB::snL4RealServerPortStatusTxBytes,Counter32,read-only,,mandatory,,Real server port transmit bytes.
.1.3.6.1.4.1.11.2.3.7.11.12.1.4.10.1.1.13,HP-SN-SW-L4-SWITCH-GROUP-MIB::snL4RealServerPortStatusPeakConnection,INTEGER,read-only,,mandatory,,peak connection for real server port.
.1.3.6.1.4.1.11.2.3.7.11.12.1.4.11,HP-SN-SW-L4-SWITCH-GROUP-MIB::snL4Policy,,,,,,
.1.3.6.1.4.1.11.2.3.7.11.12.1.4.11.1,HP-SN-SW-L4-SWITCH-GROUP-MIB::snL4PolicyTable,,not-accessible,,mandatory,,L4 policy table.
.1.3.6.1.4.1.11.2.3.7.11.12.1.4.11.1.1,HP-SN-SW-L4-SWITCH-GROUP-MIB::snL4PolicyEntry,,not-accessible,snL4PolicyId,mandatory,,An entry of the L4 policy table.
.1.3.6.1.4.1.11.2.3.7.11.12.1.4.11.1.1.1,HP-SN-SW-L4-SWITCH-GROUP-MIB::snL4PolicyId,INTEGER,read-only,,mandatory,,The ID to identify a entry.
.1.3.6.1.4.1.11.2.3.7.11.12.1.4.11.1.1.2,HP-SN-SW-L4-SWITCH-GROUP-MIB::snL4PolicyPriority,INTEGER,read-write,,mandatory,level0(0):level1(1):level2(2):level3(3):level4(4):level5(5):level6(6):level7(7),The Stand alone stackable switch L4 Policy Priority values are:
.1.3.6.1.4.1.11.2.3.7.11.12.1.4.11.1.1.3,HP-SN-SW-L4-SWITCH-GROUP-MIB::snL4PolicyScope,INTEGER,read-write,,mandatory,global(0):local(1), Scope of the local or global.
.1.3.6.1.4.1.11.2.3.7.11.12.1.4.11.1.1.4,HP-SN-SW-L4-SWITCH-GROUP-MIB::snL4PolicyProtocol,INTEGER,read-write,,mandatory,udp(0):tcp(1),
.1.3.6.1.4.1.11.2.3.7.11.12.1.4.11.1.1.5,HP-SN-SW-L4-SWITCH-GROUP-MIB::snL4PolicyPort,INTEGER,read-write,,mandatory,,
.1.3.6.1.4.1.11.2.3.7.11.12.1.4.11.1.1.6,HP-SN-SW-L4-SWITCH-GROUP-MIB::snL4PolicyRowStatus,INTEGER,read-write,,mandatory,invalid(1):valid(2):delete(3):create(4):modify(5),This object is used to create and
.1.3.6.1.4.1.11.2.3.7.11.12.1.4.12,HP-SN-SW-L4-SWITCH-GROUP-MIB::snL4PolicyPortAccess,,,,,,
.1.3.6.1.4.1.11.2.3.7.11.12.1.4.12.1,HP-SN-SW-L4-SWITCH-GROUP-MIB::snL4PolicyPortAccessTable,,not-accessible,,mandatory,,ip interface L4 policy access table.
.1.3.6.1.4.1.11.2.3.7.11.12.1.4.12.1.1,HP-SN-SW-L4-SWITCH-GROUP-MIB::snL4PolicyPortAccessEntry,,not-accessible,snL4PolicyPortAccessPort,mandatory,,An entry of the ip interface L4 policy access table.
.1.3.6.1.4.1.11.2.3.7.11.12.1.4.12.1.1.1,HP-SN-SW-L4-SWITCH-GROUP-MIB::snL4PolicyPortAccessPort,INTEGER,read-only,,mandatory,,The ip interface to which the L4 policy applies.
.1.3.6.1.4.1.11.2.3.7.11.12.1.4.12.1.1.2,HP-SN-SW-L4-SWITCH-GROUP-MIB::snL4PolicyPortAccessList,OCTET,read-write,,mandatory,,An ip L4 policy list, of which each octet contains
.1.3.6.1.4.1.11.2.3.7.11.12.1.4.12.1.1.3,HP-SN-SW-L4-SWITCH-GROUP-MIB::snL4PolicyPortAccessRowStatus,INTEGER,read-write,,mandatory,invalid(1):valid(2):delete(3):create(4):modify(5),This object is used to create and
.1.3.6.1.4.1.11.2.3.7.11.12.1.4.13,HP-SN-SW-L4-SWITCH-GROUP-MIB::snL4Trap,,,,,,
.1.3.6.1.4.1.11.2.3.7.11.12.1.4.13.1,HP-SN-SW-L4-SWITCH-GROUP-MIB::snL4TrapRealServerIP,IpAddress,not-accessible,,mandatory,,Real server IP address.
.1.3.6.1.4.1.11.2.3.7.11.12.1.4.13.2,HP-SN-SW-L4-SWITCH-GROUP-MIB::snL4TrapRealServerName,OCTET,not-accessible,,mandatory,,Real server name.
.1.3.6.1.4.1.11.2.3.7.11.12.1.4.13.3,HP-SN-SW-L4-SWITCH-GROUP-MIB::snL4TrapRealServerPort,INTEGER,not-accessible,,mandatory,,Transport protocol port number of the real server.
.1.3.6.1.4.1.11.2.3.7.11.12.1.4.13.4,HP-SN-SW-L4-SWITCH-GROUP-MIB::snL4TrapRealServerCurConnections,INTEGER,not-accessible,,mandatory,,Real Server current connections.
.1.3.6.1.4.1.11.2.3.7.11.12.1.4.14,HP-SN-SW-L4-SWITCH-GROUP-MIB::snL4WebCache,,,,,,
.1.3.6.1.4.1.11.2.3.7.11.12.1.4.14.1,HP-SN-SW-L4-SWITCH-GROUP-MIB::snL4WebCacheTable,,not-accessible,,mandatory,,Real Server table.
.1.3.6.1.4.1.11.2.3.7.11.12.1.4.14.1.1,HP-SN-SW-L4-SWITCH-GROUP-MIB::snL4WebCacheEntry,,not-accessible,snL4WebCacheIP,mandatory,,An entry in the Real Server table.
.1.3.6.1.4.1.11.2.3.7.11.12.1.4.14.1.1.1,HP-SN-SW-L4-SWITCH-GROUP-MIB::snL4WebCacheIP,IpAddress,read-only,,mandatory,,Real Server IP Address.
.1.3.6.1.4.1.11.2.3.7.11.12.1.4.14.1.1.2,HP-SN-SW-L4-SWITCH-GROUP-MIB::snL4WebCacheName,OCTET,read-write,,mandatory,,Real server name.
.1.3.6.1.4.1.11.2.3.7.11.12.1.4.14.1.1.3,HP-SN-SW-L4-SWITCH-GROUP-MIB::snL4WebCacheAdminStatus,INTEGER,read-write,,mandatory,disabled(0):enabled(1),Real Server status is ether disabled(0) or enabled(1).
.1.3.6.1.4.1.11.2.3.7.11.12.1.4.14.1.1.4,HP-SN-SW-L4-SWITCH-GROUP-MIB::snL4WebCacheMaxConnections,INTEGER,read-write,,mandatory,,Real Server Maximum Connection allowed.
.1.3.6.1.4.1.11.2.3.7.11.12.1.4.14.1.1.5,HP-SN-SW-L4-SWITCH-GROUP-MIB::snL4WebCacheWeight,INTEGER,read-write,,mandatory,,Real Server weight
.1.3.6.1.4.1.11.2.3.7.11.12.1.4.14.1.1.6,HP-SN-SW-L4-SWITCH-GROUP-MIB::snL4WebCacheRowStatus,INTEGER,read-write,,mandatory,other(1):valid(2):delete(3):create(4):modify(5),To create or delete a real server entry.
.1.3.6.1.4.1.11.2.3.7.11.12.1.4.14.1.1.7,HP-SN-SW-L4-SWITCH-GROUP-MIB::snL4WebCacheDeleteState,INTEGER,read-only,,mandatory,done(0):waitunbind(1):waitdelete(2),Delete operation state.
.1.3.6.1.4.1.11.2.3.7.11.12.1.4.15,HP-SN-SW-L4-SWITCH-GROUP-MIB::snL4WebCacheGroup,,,,,,
.1.3.6.1.4.1.11.2.3.7.11.12.1.4.15.1,HP-SN-SW-L4-SWITCH-GROUP-MIB::snL4WebCacheGroupTable,,not-accessible,,mandatory,,Web Cache Group table.
.1.3.6.1.4.1.11.2.3.7.11.12.1.4.15.1.1,HP-SN-SW-L4-SWITCH-GROUP-MIB::snL4WebCacheGroupEntry,,not-accessible,snL4WebCacheGroupId,mandatory,,An entry in the Web Cache Group table.
.1.3.6.1.4.1.11.2.3.7.11.12.1.4.15.1.1.1,HP-SN-SW-L4-SWITCH-GROUP-MIB::snL4WebCacheGroupId,INTEGER,read-only,,mandatory,,The identification for a Web Cache Group entry.
.1.3.6.1.4.1.11.2.3.7.11.12.1.4.15.1.1.2,HP-SN-SW-L4-SWITCH-GROUP-MIB::snL4WebCacheGroupName,OCTET,read-write,,mandatory,,Web Cache Group name.
.1.3.6.1.4.1.11.2.3.7.11.12.1.4.15.1.1.3,HP-SN-SW-L4-SWITCH-GROUP-MIB::snL4WebCacheGroupWebCacheIpList,OCTET,read-write,,mandatory,,A list of the Server Cache Group Real Server IP Address.
.1.3.6.1.4.1.11.2.3.7.11.12.1.4.15.1.1.4,HP-SN-SW-L4-SWITCH-GROUP-MIB::snL4WebCacheGroupDestMask,IpAddress,read-write,,mandatory,,Cache Server Group Destination Mask.
.1.3.6.1.4.1.11.2.3.7.11.12.1.4.15.1.1.5,HP-SN-SW-L4-SWITCH-GROUP-MIB::snL4WebCacheGroupSrcMask,IpAddress,read-write,,mandatory,,Cache Server Group Source Mask.
.1.3.6.1.4.1.11.2.3.7.11.12.1.4.15.1.1.6,HP-SN-SW-L4-SWITCH-GROUP-MIB::snL4WebCacheGroupAdminStatus,INTEGER,read-write,,mandatory,disabled(0):enabled(1),The WEB Cache Group is set either
.1.3.6.1.4.1.11.2.3.7.11.12.1.4.15.1.1.7,HP-SN-SW-L4-SWITCH-GROUP-MIB::snL4WebCacheGroupRowStatus,INTEGER,read-write,,mandatory,other(1):valid(2):delete(3):create(4):modify(5),To create or delete a Web Cache Group entry.
.1.3.6.1.4.1.11.2.3.7.11.12.1.4.16,HP-SN-SW-L4-SWITCH-GROUP-MIB::snL4WebCacheTrafficStats,,,,,,
.1.3.6.1.4.1.11.2.3.7.11.12.1.4.16.1,HP-SN-SW-L4-SWITCH-GROUP-MIB::snL4WebCacheTrafficStatsTable,,not-accessible,,mandatory,,Web Cache Traffic Statistics table.
.1.3.6.1.4.1.11.2.3.7.11.12.1.4.16.1.1,HP-SN-SW-L4-SWITCH-GROUP-MIB::snL4WebCacheTrafficStatsEntry,,not-accessible,snL4WebCacheTrafficIp:snL4WebCacheTrafficPort,mandatory,,An entry in the Web Cache Traffic Statistics table.
.1.3.6.1.4.1.11.2.3.7.11.12.1.4.16.1.1.1,HP-SN-SW-L4-SWITCH-GROUP-MIB::snL4WebCacheTrafficIp,IpAddress,read-only,,mandatory,,Cache Server IP Address.
.1.3.6.1.4.1.11.2.3.7.11.12.1.4.16.1.1.2,HP-SN-SW-L4-SWITCH-GROUP-MIB::snL4WebCacheTrafficPort,INTEGER,read-only,,mandatory,,The WEB Cache port is one of the protocol port such as UDP, TCP etc.
.1.3.6.1.4.1.11.2.3.7.11.12.1.4.16.1.1.3,HP-SN-SW-L4-SWITCH-GROUP-MIB::snL4WebCacheCurrConnections,INTEGER,read-only,,mandatory,,Number of the current connections in WEB Cache group.
.1.3.6.1.4.1.11.2.3.7.11.12.1.4.16.1.1.4,HP-SN-SW-L4-SWITCH-GROUP-MIB::snL4WebCacheTotalConnections,INTEGER,read-only,,mandatory,,The total connections in WEB Cache group.
.1.3.6.1.4.1.11.2.3.7.11.12.1.4.16.1.1.5,HP-SN-SW-L4-SWITCH-GROUP-MIB::snL4WebCacheTxPkts,Counter32,read-only,,mandatory,,Number of the Packets sending from Client/Web-Server to Cache Server
.1.3.6.1.4.1.11.2.3.7.11.12.1.4.16.1.1.6,HP-SN-SW-L4-SWITCH-GROUP-MIB::snL4WebCacheRxPkts,Counter32,read-only,,mandatory,,Number of the Packets sending from Cache Server to Client/Web-Server
.1.3.6.1.4.1.11.2.3.7.11.12.1.4.16.1.1.7,HP-SN-SW-L4-SWITCH-GROUP-MIB::snL4WebCacheTxOctets,Counter32,read-only,,mandatory,,Number of the Octets sending from Client/Web-Server to Cache Server
.1.3.6.1.4.1.11.2.3.7.11.12.1.4.16.1.1.8,HP-SN-SW-L4-SWITCH-GROUP-MIB::snL4WebCacheRxOctets,Counter32,read-only,,mandatory,,Number of the Octets sending from Cache Server to Client/Web-Server
.1.3.6.1.4.1.11.2.3.7.11.12.1.4.16.1.1.9,HP-SN-SW-L4-SWITCH-GROUP-MIB::snL4WebCachePortState,INTEGER,read-only,,mandatory,disabled(0):enabled(1):failed(2):testing(3):suspect(4):shutdown(5):active(6),Web Cache Port state.
.1.3.6.1.4.1.11.2.3.7.11.12.1.4.17,HP-SN-SW-L4-SWITCH-GROUP-MIB::snL4WebUncachedTrafficStats,,,,,,
.1.3.6.1.4.1.11.2.3.7.11.12.1.4.17.1,HP-SN-SW-L4-SWITCH-GROUP-MIB::snL4WebUncachedTrafficStatsTable,,not-accessible,,mandatory,,Web Uncached Traffic Statistics table.
.1.3.6.1.4.1.11.2.3.7.11.12.1.4.17.1.1,HP-SN-SW-L4-SWITCH-GROUP-MIB::snL4WebUncachedTrafficStatsEntry,,not-accessible,snL4WebServerPort:snL4WebClientPort,mandatory,,An entry in the Web Uncached Traffic Statistics table.
.1.3.6.1.4.1.11.2.3.7.11.12.1.4.17.1.1.1,HP-SN-SW-L4-SWITCH-GROUP-MIB::snL4WebServerPort,INTEGER,read-only,,mandatory,,Web Server Port.
.1.3.6.1.4.1.11.2.3.7.11.12.1.4.17.1.1.2,HP-SN-SW-L4-SWITCH-GROUP-MIB::snL4WebClientPort,INTEGER,read-only,,mandatory,,Web Client Port.
.1.3.6.1.4.1.11.2.3.7.11.12.1.4.17.1.1.3,HP-SN-SW-L4-SWITCH-GROUP-MIB::snL4WebUncachedTxPkts,Counter32,read-only,,mandatory,,Number of the Packets sending from Client port to Web Server port
.1.3.6.1.4.1.11.2.3.7.11.12.1.4.17.1.1.4,HP-SN-SW-L4-SWITCH-GROUP-MIB::snL4WebUncachedRxPkts,Counter32,read-only,,mandatory,,Number of the Packets sending from Web Server port to Client port
.1.3.6.1.4.1.11.2.3.7.11.12.1.4.17.1.1.5,HP-SN-SW-L4-SWITCH-GROUP-MIB::snL4WebUncachedTxOctets,Counter32,read-only,,mandatory,,Number of the Octets sending from Client port to Web Server port
.1.3.6.1.4.1.11.2.3.7.11.12.1.4.17.1.1.6,HP-SN-SW-L4-SWITCH-GROUP-MIB::snL4WebUncachedRxOctets,Counter32,read-only,,mandatory,,Number of the Octets sending from Web Server port to Client port
.1.3.6.1.4.1.11.2.3.7.11.12.1.4.17.1.1.7,HP-SN-SW-L4-SWITCH-GROUP-MIB::snL4WebServerPortName,OCTET,read-only,,mandatory,,Web Server Port Name string.
.1.3.6.1.4.1.11.2.3.7.11.12.1.4.17.1.1.8,HP-SN-SW-L4-SWITCH-GROUP-MIB::snL4WebClientPortName,OCTET,read-only,,mandatory,,Web Client Port Name string.
.1.3.6.1.4.1.11.2.3.7.11.12.1.4.18,HP-SN-SW-L4-SWITCH-GROUP-MIB::snL4WebCachePort,,,,,,
.1.3.6.1.4.1.11.2.3.7.11.12.1.4.18.1,HP-SN-SW-L4-SWITCH-GROUP-MIB::snL4WebCachePortTable,,not-accessible,,mandatory,,Real Server Port table.
.1.3.6.1.4.1.11.2.3.7.11.12.1.4.18.1.1,HP-SN-SW-L4-SWITCH-GROUP-MIB::snL4WebCachePortEntry,,not-accessible,snL4WebCachePortServerIp:snL4WebCachePortPort,mandatory,,An entry in the Real Server Port table.
.1.3.6.1.4.1.11.2.3.7.11.12.1.4.18.1.1.1,HP-SN-SW-L4-SWITCH-GROUP-MIB::snL4WebCachePortServerIp,IpAddress,read-only,,mandatory,,Cache Server IP Address.
.1.3.6.1.4.1.11.2.3.7.11.12.1.4.18.1.1.2,HP-SN-SW-L4-SWITCH-GROUP-MIB::snL4WebCachePortPort,INTEGER,read-only,,mandatory,,The WEB Cache port is one of the protocol port such as UDP, TCP etc.
.1.3.6.1.4.1.11.2.3.7.11.12.1.4.18.1.1.3,HP-SN-SW-L4-SWITCH-GROUP-MIB::snL4WebCachePortAdminStatus,INTEGER,read-write,,mandatory,disabled(0):enabled(1),
.1.3.6.1.4.1.11.2.3.7.11.12.1.4.18.1.1.4,HP-SN-SW-L4-SWITCH-GROUP-MIB::snL4WebCachePortRowStatus,INTEGER,read-write,,mandatory,other(1):valid(2):delete(3):create(4):modify(5),To create or delete a Real server port entry.
.1.3.6.1.4.1.11.2.3.7.11.12.1.4.18.1.1.5,HP-SN-SW-L4-SWITCH-GROUP-MIB::snL4WebCachePortDeleteState,INTEGER,read-only,,mandatory,done(0):waitunbind(1):waitdelete(2),Delete operation state.
.1.3.6.1.4.1.11.2.3.7.11.12.1.4.19,HP-SN-SW-L4-SWITCH-GROUP-MIB::snL4RealServerCfg,,,,,,
.1.3.6.1.4.1.11.2.3.7.11.12.1.4.19.1,HP-SN-SW-L4-SWITCH-GROUP-MIB::snL4RealServerCfgTable,,not-accessible,,mandatory,,Real Server table.
.1.3.6.1.4.1.11.2.3.7.11.12.1.4.19.1.1,HP-SN-SW-L4-SWITCH-GROUP-MIB::snL4RealServerCfgEntry,,not-accessible,snL4RealServerCfgIP,mandatory,,An entry in the Real Server table.
.1.3.6.1.4.1.11.2.3.7.11.12.1.4.19.1.1.1,HP-SN-SW-L4-SWITCH-GROUP-MIB::snL4RealServerCfgIP,IpAddress,read-only,,mandatory,,Real Server IP Address.
.1.3.6.1.4.1.11.2.3.7.11.12.1.4.19.1.1.2,HP-SN-SW-L4-SWITCH-GROUP-MIB::snL4RealServerCfgName,OCTET,read-write,,mandatory,,Real server name.
.1.3.6.1.4.1.11.2.3.7.11.12.1.4.19.1.1.3,HP-SN-SW-L4-SWITCH-GROUP-MIB::snL4RealServerCfgAdminStatus,INTEGER,read-write,,mandatory,disabled(0):enabled(1),Real Server status is ether disabled(0) or enabled(1).
.1.3.6.1.4.1.11.2.3.7.11.12.1.4.19.1.1.4,HP-SN-SW-L4-SWITCH-GROUP-MIB::snL4RealServerCfgMaxConnections,INTEGER,read-write,,mandatory,,Real Server Maximum Connection allowed.
.1.3.6.1.4.1.11.2.3.7.11.12.1.4.19.1.1.5,HP-SN-SW-L4-SWITCH-GROUP-MIB::snL4RealServerCfgWeight,INTEGER,read-write,,mandatory,,Real Server weight
.1.3.6.1.4.1.11.2.3.7.11.12.1.4.19.1.1.6,HP-SN-SW-L4-SWITCH-GROUP-MIB::snL4RealServerCfgRowStatus,INTEGER,read-write,,mandatory,other(1):valid(2):delete(3):create(4):modify(5),To create or delete a real server entry.
.1.3.6.1.4.1.11.2.3.7.11.12.1.4.19.1.1.7,HP-SN-SW-L4-SWITCH-GROUP-MIB::snL4RealServerCfgDeleteState,INTEGER,read-only,,mandatory,done(0):waitunbind(1):waitdelete(2),Delete operation state.
.1.3.6.1.4.1.11.2.3.7.11.12.1.4.20,HP-SN-SW-L4-SWITCH-GROUP-MIB::snL4RealServerPortCfg,,,,,,
.1.3.6.1.4.1.11.2.3.7.11.12.1.4.20.1,HP-SN-SW-L4-SWITCH-GROUP-MIB::snL4RealServerPortCfgTable,,not-accessible,,mandatory,,Real Server Port table.
.1.3.6.1.4.1.11.2.3.7.11.12.1.4.20.1.1,HP-SN-SW-L4-SWITCH-GROUP-MIB::snL4RealServerPortCfgEntry,,not-accessible,snL4RealServerPortCfgIP:snL4RealServerPortCfgPort,mandatory,,An entry in the Real Server Port table.
.1.3.6.1.4.1.11.2.3.7.11.12.1.4.20.1.1.1,HP-SN-SW-L4-SWITCH-GROUP-MIB::snL4RealServerPortCfgIP,IpAddress,read-only,,mandatory,,The IP address for the Real Server .
.1.3.6.1.4.1.11.2.3.7.11.12.1.4.20.1.1.2,HP-SN-SW-L4-SWITCH-GROUP-MIB::snL4RealServerPortCfgServerName,OCTET,read-only,,mandatory,,
.1.3.6.1.4.1.11.2.3.7.11.12.1.4.20.1.1.3,HP-SN-SW-L4-SWITCH-GROUP-MIB::snL4RealServerPortCfgPort,INTEGER,read-only,,mandatory,,
.1.3.6.1.4.1.11.2.3.7.11.12.1.4.20.1.1.4,HP-SN-SW-L4-SWITCH-GROUP-MIB::snL4RealServerPortCfgAdminStatus,INTEGER,read-write,,mandatory,disabled(0):enabled(1),
.1.3.6.1.4.1.11.2.3.7.11.12.1.4.20.1.1.5,HP-SN-SW-L4-SWITCH-GROUP-MIB::snL4RealServerPortCfgRowStatus,INTEGER,read-write,,mandatory,other(1):valid(2):delete(3):create(4):modify(5),To create or delete a Real server port entry.
.1.3.6.1.4.1.11.2.3.7.11.12.1.4.20.1.1.6,HP-SN-SW-L4-SWITCH-GROUP-MIB::snL4RealServerPortCfgDeleteState,INTEGER,read-only,,mandatory,done(0):waitunbind(1):waitdelete(2),Delete operation state.
.1.3.6.1.4.1.11.2.3.7.11.12.1.4.21,HP-SN-SW-L4-SWITCH-GROUP-MIB::snL4VirtualServerCfg,,,,,,
.1.3.6.1.4.1.11.2.3.7.11.12.1.4.21.1,HP-SN-SW-L4-SWITCH-GROUP-MIB::snL4VirtualServerCfgTable,,not-accessible,,mandatory,,Virtual Server table.
.1.3.6.1.4.1.11.2.3.7.11.12.1.4.21.1.1,HP-SN-SW-L4-SWITCH-GROUP-MIB::snL4VirtualServerCfgEntry,,not-accessible,snL4VirtualServerCfgVirtualIP,mandatory,,An entry in L4 Virtual Server table.
.1.3.6.1.4.1.11.2.3.7.11.12.1.4.21.1.1.1,HP-SN-SW-L4-SWITCH-GROUP-MIB::snL4VirtualServerCfgVirtualIP,IpAddress,read-only,,mandatory,,Virtual Server IP Address.
.1.3.6.1.4.1.11.2.3.7.11.12.1.4.21.1.1.2,HP-SN-SW-L4-SWITCH-GROUP-MIB::snL4VirtualServerCfgName,OCTET,read-write,,mandatory,,Virtual server name.
.1.3.6.1.4.1.11.2.3.7.11.12.1.4.21.1.1.3,HP-SN-SW-L4-SWITCH-GROUP-MIB::snL4VirtualServerCfgAdminStatus,INTEGER,read-write,,mandatory,disabled(0):enabled(1),Virtual Server status is ether disabled(0) or enabled(1).
.1.3.6.1.4.1.11.2.3.7.11.12.1.4.21.1.1.4,HP-SN-SW-L4-SWITCH-GROUP-MIB::snL4VirtualServerCfgSDAType,INTEGER,read-write,,mandatory,default(0):leastconnection(1):roundrobin(2):weighted(3),TCP/UDP Sessions Distribution Algorithms Type.
.1.3.6.1.4.1.11.2.3.7.11.12.1.4.21.1.1.5,HP-SN-SW-L4-SWITCH-GROUP-MIB::snL4VirtualServerCfgRowStatus,INTEGER,read-write,,mandatory,other(1):valid(2):delete(3):create(4):modify(5),To create or delete a virtual server
.1.3.6.1.4.1.11.2.3.7.11.12.1.4.21.1.1.6,HP-SN-SW-L4-SWITCH-GROUP-MIB::snL4VirtualServerCfgDeleteState,INTEGER,read-only,,mandatory,done(0):waitunbind(1):waitdelete(2),Delete operation state.
.1.3.6.1.4.1.11.2.3.7.11.12.1.4.22,HP-SN-SW-L4-SWITCH-GROUP-MIB::snL4VirtualServerPortCfg,,,,,,
.1.3.6.1.4.1.11.2.3.7.11.12.1.4.22.1,HP-SN-SW-L4-SWITCH-GROUP-MIB::snL4VirtualServerPortCfgTable,,not-accessible,,mandatory,,Virtual Server Port table.
.1.3.6.1.4.1.11.2.3.7.11.12.1.4.22.1.1,HP-SN-SW-L4-SWITCH-GROUP-MIB::snL4VirtualServerPortCfgEntry,,not-accessible,snL4VirtualServerPortCfgIP:snL4VirtualServerPortCfgPort,mandatory,,An entry in the Virtual Server Port table.
.1.3.6.1.4.1.11.2.3.7.11.12.1.4.22.1.1.1,HP-SN-SW-L4-SWITCH-GROUP-MIB::snL4VirtualServerPortCfgIP,IpAddress,read-only,,mandatory,,Virtual Server IP Address.
.1.3.6.1.4.1.11.2.3.7.11.12.1.4.22.1.1.2,HP-SN-SW-L4-SWITCH-GROUP-MIB::snL4VirtualServerPortCfgPort,INTEGER,read-only,,mandatory,,
.1.3.6.1.4.1.11.2.3.7.11.12.1.4.22.1.1.3,HP-SN-SW-L4-SWITCH-GROUP-MIB::snL4VirtualServerPortCfgServerName,OCTET,read-only,,mandatory,,
.1.3.6.1.4.1.11.2.3.7.11.12.1.4.22.1.1.4,HP-SN-SW-L4-SWITCH-GROUP-MIB::snL4VirtualServerPortCfgAdminStatus,INTEGER,read-write,,mandatory,disabled(0):enabled(1),
.1.3.6.1.4.1.11.2.3.7.11.12.1.4.22.1.1.5,HP-SN-SW-L4-SWITCH-GROUP-MIB::snL4VirtualServerPortCfgSticky,INTEGER,read-write,,mandatory,disabled(0):enabled(1),
.1.3.6.1.4.1.11.2.3.7.11.12.1.4.22.1.1.6,HP-SN-SW-L4-SWITCH-GROUP-MIB::snL4VirtualServerPortCfgConcurrent,INTEGER,read-write,,mandatory,disabled(0):enabled(1),
.1.3.6.1.4.1.11.2.3.7.11.12.1.4.22.1.1.7,HP-SN-SW-L4-SWITCH-GROUP-MIB::snL4VirtualServerPortCfgRowStatus,INTEGER,read-write,,mandatory,other(1):valid(2):delete(3):create(4):modify(5),To create or delete a virtual server port entry.
.1.3.6.1.4.1.11.2.3.7.11.12.1.4.22.1.1.8,HP-SN-SW-L4-SWITCH-GROUP-MIB::snL4VirtualServerPortCfgDeleteState,INTEGER,read-only,,mandatory,done(0):waitunbind(1):waitdelete(2),Delete operation state.
.1.3.6.1.4.1.11.2.3.7.11.12.1.4.23,HP-SN-SW-L4-SWITCH-GROUP-MIB::snL4RealServerStatistic,,,,,,
.1.3.6.1.4.1.11.2.3.7.11.12.1.4.23.1,HP-SN-SW-L4-SWITCH-GROUP-MIB::snL4RealServerStatisticTable,,not-accessible,,mandatory,,Real Server Statistic table.
.1.3.6.1.4.1.11.2.3.7.11.12.1.4.23.1.1,HP-SN-SW-L4-SWITCH-GROUP-MIB::snL4RealServerStatisticEntry,,not-accessible,snL4RealServerStatisticRealIP,mandatory,,An entry in the Real Server Statistic table.
.1.3.6.1.4.1.11.2.3.7.11.12.1.4.23.1.1.1,HP-SN-SW-L4-SWITCH-GROUP-MIB::snL4RealServerStatisticRealIP,IpAddress,read-only,,mandatory,,
.1.3.6.1.4.1.11.2.3.7.11.12.1.4.23.1.1.2,HP-SN-SW-L4-SWITCH-GROUP-MIB::snL4RealServerStatisticName,OCTET,read-only,,mandatory,,
.1.3.6.1.4.1.11.2.3.7.11.12.1.4.23.1.1.3,HP-SN-SW-L4-SWITCH-GROUP-MIB::snL4RealServerStatisticReceivePkts,Counter32,read-only,,mandatory,,
.1.3.6.1.4.1.11.2.3.7.11.12.1.4.23.1.1.4,HP-SN-SW-L4-SWITCH-GROUP-MIB::snL4RealServerStatisticTransmitPkts,Counter32,read-only,,mandatory,,
.1.3.6.1.4.1.11.2.3.7.11.12.1.4.23.1.1.5,HP-SN-SW-L4-SWITCH-GROUP-MIB::snL4RealServerStatisticCurConnections,INTEGER,read-only,,mandatory,,
.1.3.6.1.4.1.11.2.3.7.11.12.1.4.23.1.1.6,HP-SN-SW-L4-SWITCH-GROUP-MIB::snL4RealServerStatisticTotalConnections,Counter32,read-only,,mandatory,,
.1.3.6.1.4.1.11.2.3.7.11.12.1.4.23.1.1.7,HP-SN-SW-L4-SWITCH-GROUP-MIB::snL4RealServerStatisticAge,INTEGER,read-only,,mandatory,,
.1.3.6.1.4.1.11.2.3.7.11.12.1.4.23.1.1.8,HP-SN-SW-L4-SWITCH-GROUP-MIB::snL4RealServerStatisticState,INTEGER,read-only,,mandatory,serverdisabled(0):serverenabled(1):serverfailed(2):servertesting(3):serversuspect(4):servershutdown(5):serveractive(6),
.1.3.6.1.4.1.11.2.3.7.11.12.1.4.23.1.1.9,HP-SN-SW-L4-SWITCH-GROUP-MIB::snL4RealServerStatisticReassignments,INTEGER,read-only,,mandatory,,
.1.3.6.1.4.1.11.2.3.7.11.12.1.4.23.1.1.10,HP-SN-SW-L4-SWITCH-GROUP-MIB::snL4RealServerStatisticReassignmentLimit,INTEGER,read-only,,mandatory,,
.1.3.6.1.4.1.11.2.3.7.11.12.1.4.23.1.1.11,HP-SN-SW-L4-SWITCH-GROUP-MIB::snL4RealServerStatisticFailedPortExists,INTEGER,read-only,,mandatory,,
.1.3.6.1.4.1.11.2.3.7.11.12.1.4.23.1.1.12,HP-SN-SW-L4-SWITCH-GROUP-MIB::snL4RealServerStatisticFailTime,INTEGER,read-only,,mandatory,,
.1.3.6.1.4.1.11.2.3.7.11.12.1.4.23.1.1.13,HP-SN-SW-L4-SWITCH-GROUP-MIB::snL4RealServerStatisticPeakConnections,INTEGER,read-only,,mandatory,,
.1.3.6.1.4.1.11.2.3.7.11.12.1.4.24,HP-SN-SW-L4-SWITCH-GROUP-MIB::snL4RealServerPortStatistic,,,,,,
.1.3.6.1.4.1.11.2.3.7.11.12.1.4.24.1,HP-SN-SW-L4-SWITCH-GROUP-MIB::snL4RealServerPortStatisticTable,,not-accessible,,mandatory,,Real Server Port Statistic table.
.1.3.6.1.4.1.11.2.3.7.11.12.1.4.24.1.1,HP-SN-SW-L4-SWITCH-GROUP-MIB::snL4RealServerPortStatisticEntry,,not-accessible,snL4RealServerPortStatisticIP:snL4RealServerPortStatisticPort,mandatory,,An entry in the Real Server Port Statistic table.
.1.3.6.1.4.1.11.2.3.7.11.12.1.4.24.1.1.1,HP-SN-SW-L4-SWITCH-GROUP-MIB::snL4RealServerPortStatisticIP,IpAddress,read-only,,mandatory,,The index for Real Server Port Statistic entry.
.1.3.6.1.4.1.11.2.3.7.11.12.1.4.24.1.1.2,HP-SN-SW-L4-SWITCH-GROUP-MIB::snL4RealServerPortStatisticPort,INTEGER,read-only,,mandatory,,
.1.3.6.1.4.1.11.2.3.7.11.12.1.4.24.1.1.3,HP-SN-SW-L4-SWITCH-GROUP-MIB::snL4RealServerPortStatisticServerName,OCTET,read-only,,mandatory,,
.1.3.6.1.4.1.11.2.3.7.11.12.1.4.24.1.1.4,HP-SN-SW-L4-SWITCH-GROUP-MIB::snL4RealServerPortStatisticReassignCount,INTEGER,read-only,,mandatory,,
.1.3.6.1.4.1.11.2.3.7.11.12.1.4.24.1.1.5,HP-SN-SW-L4-SWITCH-GROUP-MIB::snL4RealServerPortStatisticState,INTEGER,read-only,,mandatory,disabled(0):enabled(1):failed(2):testing(3):suspect(4):shutdown(5):active(6):unbound(7):awaitUnbind(8):awaitDelete(9),Real server port state
.1.3.6.1.4.1.11.2.3.7.11.12.1.4.24.1.1.6,HP-SN-SW-L4-SWITCH-GROUP-MIB::snL4RealServerPortStatisticFailTime,INTEGER,read-only,,mandatory,,Only useful, if real server port state is failed.
.1.3.6.1.4.1.11.2.3.7.11.12.1.4.24.1.1.7,HP-SN-SW-L4-SWITCH-GROUP-MIB::snL4RealServerPortStatisticCurrentConnection,INTEGER,read-only,,mandatory,,Real server port current connection
.1.3.6.1.4.1.11.2.3.7.11.12.1.4.24.1.1.8,HP-SN-SW-L4-SWITCH-GROUP-MIB::snL4RealServerPortStatisticTotalConnection,Counter32,read-only,,mandatory,,Real server port total connection
.1.3.6.1.4.1.11.2.3.7.11.12.1.4.24.1.1.9,HP-SN-SW-L4-SWITCH-GROUP-MIB::snL4RealServerPortStatisticRxPkts,Counter32,read-only,,mandatory,,Real server port receive packets.
.1.3.6.1.4.1.11.2.3.7.11.12.1.4.24.1.1.10,HP-SN-SW-L4-SWITCH-GROUP-MIB::snL4RealServerPortStatisticTxPkts,Counter32,read-only,,mandatory,,Real server port transmit packets.
.1.3.6.1.4.1.11.2.3.7.11.12.1.4.24.1.1.11,HP-SN-SW-L4-SWITCH-GROUP-MIB::snL4RealServerPortStatisticRxBytes,Counter32,read-only,,mandatory,,Real server port receive bytes.
.1.3.6.1.4.1.11.2.3.7.11.12.1.4.24.1.1.12,HP-SN-SW-L4-SWITCH-GROUP-MIB::snL4RealServerPortStatisticTxBytes,Counter32,read-only,,mandatory,,Real server port transmit bytes.
.1.3.6.1.4.1.11.2.3.7.11.12.1.4.24.1.1.13,HP-SN-SW-L4-SWITCH-GROUP-MIB::snL4RealServerPortStatisticPeakConnection,INTEGER,read-only,,mandatory,,peak connection for real server port.
.1.3.6.1.4.1.11.2.3.7.11.12.1.4.25,HP-SN-SW-L4-SWITCH-GROUP-MIB::snL4VirtualServerStatistic,,,,,,
.1.3.6.1.4.1.11.2.3.7.11.12.1.4.25.1,HP-SN-SW-L4-SWITCH-GROUP-MIB::snL4VirtualServerStatisticTable,,not-accessible,,mandatory,,Virtual Server Statistic table.
.1.3.6.1.4.1.11.2.3.7.11.12.1.4.25.1.1,HP-SN-SW-L4-SWITCH-GROUP-MIB::snL4VirtualServerStatisticEntry,,not-accessible,snL4VirtualServerStatisticIP,mandatory,,An entry in L4 Virtual Server Statistic table.
.1.3.6.1.4.1.11.2.3.7.11.12.1.4.25.1.1.1,HP-SN-SW-L4-SWITCH-GROUP-MIB::snL4VirtualServerStatisticIP,IpAddress,read-only,,mandatory,,The table index for a Virtual Server Statistic entry.
.1.3.6.1.4.1.11.2.3.7.11.12.1.4.25.1.1.2,HP-SN-SW-L4-SWITCH-GROUP-MIB::snL4VirtualServerStatisticName,OCTET,read-only,,mandatory,,Virtual server name.
.1.3.6.1.4.1.11.2.3.7.11.12.1.4.25.1.1.3,HP-SN-SW-L4-SWITCH-GROUP-MIB::snL4VirtualServerStatisticReceivePkts,Counter32,read-only,,mandatory,,
.1.3.6.1.4.1.11.2.3.7.11.12.1.4.25.1.1.4,HP-SN-SW-L4-SWITCH-GROUP-MIB::snL4VirtualServerStatisticTransmitPkts,Counter32,read-only,,mandatory,,
.1.3.6.1.4.1.11.2.3.7.11.12.1.4.25.1.1.5,HP-SN-SW-L4-SWITCH-GROUP-MIB::snL4VirtualServerStatisticTotalConnections,Counter32,read-only,,mandatory,,
.1.3.6.1.4.1.11.2.3.7.11.12.1.4.25.1.1.6,HP-SN-SW-L4-SWITCH-GROUP-MIB::snL4VirtualServerStatisticReceiveBytes,Counter64,read-only,,mandatory,,
.1.3.6.1.4.1.11.2.3.7.11.12.1.4.25.1.1.7,HP-SN-SW-L4-SWITCH-GROUP-MIB::snL4VirtualServerStatisticTransmitBytes,Counter64,read-only,,mandatory,,
.1.3.6.1.4.1.11.2.3.7.11.12.1.4.25.1.1.8,HP-SN-SW-L4-SWITCH-GROUP-MIB::snL4VirtualServerStatisticSymmetricState,INTEGER,read-only,,mandatory,,
.1.3.6.1.4.1.11.2.3.7.11.12.1.4.25.1.1.9,HP-SN-SW-L4-SWITCH-GROUP-MIB::snL4VirtualServerStatisticSymmetricPriority,INTEGER,read-only,,mandatory,,
.1.3.6.1.4.1.11.2.3.7.11.12.1.4.25.1.1.10,HP-SN-SW-L4-SWITCH-GROUP-MIB::snL4VirtualServerStatisticSymmetricKeep,INTEGER,read-only,,mandatory,,
.1.3.6.1.4.1.11.2.3.7.11.12.1.4.25.1.1.11,HP-SN-SW-L4-SWITCH-GROUP-MIB::snL4VirtualServerStatisticSymmetricActivates,Counter32,read-only,,mandatory,,
.1.3.6.1.4.1.11.2.3.7.11.12.1.4.25.1.1.12,HP-SN-SW-L4-SWITCH-GROUP-MIB::snL4VirtualServerStatisticSymmetricInactives,Counter32,read-only,,mandatory,,
.1.3.6.1.4.1.11.2.3.7.11.12.1.4.25.1.1.13,HP-SN-SW-L4-SWITCH-GROUP-MIB::snL4VirtualServerStatisticSymmetricBestStandbyMacAddr,OCTET,read-only,,mandatory,,
.1.3.6.1.4.1.11.2.3.7.11.12.1.4.25.1.1.14,HP-SN-SW-L4-SWITCH-GROUP-MIB::snL4VirtualServerStatisticSymmetricActiveMacAddr,OCTET,read-only,,mandatory,,
.1.3.6.1.4.1.11.2.3.7.11.12.1.4.26,HP-SN-SW-L4-SWITCH-GROUP-MIB::snL4VirtualServerPortStatistic,,,,,,
.1.3.6.1.4.1.11.2.3.7.11.12.1.4.26.1,HP-SN-SW-L4-SWITCH-GROUP-MIB::snL4VirtualServerPortStatisticTable,,not-accessible,,mandatory,,Virtual Server Port Statistic table.
.1.3.6.1.4.1.11.2.3.7.11.12.1.4.26.1.1,HP-SN-SW-L4-SWITCH-GROUP-MIB::snL4VirtualServerPortStatisticEntry,,not-accessible,snL4VirtualServerPortStatisticIP:snL4VirtualServerPortStatisticPort,mandatory,,An entry in the Virtual Server Port Statistic table.
.1.3.6.1.4.1.11.2.3.7.11.12.1.4.26.1.1.1,HP-SN-SW-L4-SWITCH-GROUP-MIB::snL4VirtualServerPortStatisticIP,IpAddress,read-only,,mandatory,,The index for Virtual Server Port Statistic entry.
.1.3.6.1.4.1.11.2.3.7.11.12.1.4.26.1.1.2,HP-SN-SW-L4-SWITCH-GROUP-MIB::snL4VirtualServerPortStatisticPort,INTEGER,read-only,,mandatory,,
.1.3.6.1.4.1.11.2.3.7.11.12.1.4.26.1.1.3,HP-SN-SW-L4-SWITCH-GROUP-MIB::snL4VirtualServerPortStatisticServerName,OCTET,read-only,,mandatory,,
.1.3.6.1.4.1.11.2.3.7.11.12.1.4.26.1.1.4,HP-SN-SW-L4-SWITCH-GROUP-MIB::snL4VirtualServerPortStatisticCurrentConnection,INTEGER,read-only,,mandatory,,
.1.3.6.1.4.1.11.2.3.7.11.12.1.4.26.1.1.5,HP-SN-SW-L4-SWITCH-GROUP-MIB::snL4VirtualServerPortStatisticTotalConnection,Counter32,read-only,,mandatory,,
.1.3.6.1.4.1.11.2.3.7.11.12.1.4.26.1.1.6,HP-SN-SW-L4-SWITCH-GROUP-MIB::snL4VirtualServerPortStatisticPeakConnection,INTEGER,read-only,,mandatory,,
.1.3.6.1.4.1.11.2.3.7.11.12.1.4.27,HP-SN-SW-L4-SWITCH-GROUP-MIB::snL4GslbSiteRemoteServerIrons,,,,,,
.1.3.6.1.4.1.11.2.3.7.11.12.1.4.27.1,HP-SN-SW-L4-SWITCH-GROUP-MIB::snL4GslbSiteRemoteServerIronTable,,not-accessible,,mandatory,,GSLB remote ServerIron configuration table.
.1.3.6.1.4.1.11.2.3.7.11.12.1.4.27.1.1,HP-SN-SW-L4-SWITCH-GROUP-MIB::snL4GslbSiteRemoteServerIronEntry,,not-accessible,snL4GslbSiteRemoteServerIronIP,mandatory,,An entry of a GSLB remote ServerIron configuration.
.1.3.6.1.4.1.11.2.3.7.11.12.1.4.27.1.1.1,HP-SN-SW-L4-SWITCH-GROUP-MIB::snL4GslbSiteRemoteServerIronIP,IpAddress,read-only,,mandatory,,The index for each remote ServerIron in a site.
.1.3.6.1.4.1.11.2.3.7.11.12.1.4.27.1.1.2,HP-SN-SW-L4-SWITCH-GROUP-MIB::snL4GslbSiteRemoteServerIronPreference,INTEGER,read-write,,mandatory,,The preference of a remote ServerIron. The default value is 128.
.1.3.6.1.4.1.11.2.3.7.11.12.1.4.28,HP-SN-SW-L4-SWITCH-GROUP-MIB::snL4History,,,,,,
.1.3.6.1.4.1.11.2.3.7.11.12.1.4.28.1,HP-SN-SW-L4-SWITCH-GROUP-MIB::snL4RealServerHistoryControlTable,,not-accessible,,mandatory,,A list of history control entries.
.1.3.6.1.4.1.11.2.3.7.11.12.1.4.28.1.1,HP-SN-SW-L4-SWITCH-GROUP-MIB::snL4RealServerHistoryControlEntry,,not-accessible,snL4RealServerHistoryControlIndex,mandatory,,A list of parameters that set up a periodic sampling
.1.3.6.1.4.1.11.2.3.7.11.12.1.4.28.1.1.1,HP-SN-SW-L4-SWITCH-GROUP-MIB::snL4RealServerHistoryControlIndex,INTEGER,read-only,,mandatory,,An index that uniquely identifies an entry in the
.1.3.6.1.4.1.11.2.3.7.11.12.1.4.28.1.1.2,HP-SN-SW-L4-SWITCH-GROUP-MIB::snL4RealServerHistoryControlDataSource,OBJECT,read-write,,mandatory,,This object identifies the source of the data for
.1.3.6.1.4.1.11.2.3.7.11.12.1.4.28.1.1.3,HP-SN-SW-L4-SWITCH-GROUP-MIB::snL4RealServerHistoryControlBucketsRequested,INTEGER,read-write,,mandatory,,The requested number of discrete time intervals
.1.3.6.1.4.1.11.2.3.7.11.12.1.4.28.1.1.4,HP-SN-SW-L4-SWITCH-GROUP-MIB::snL4RealServerHistoryControlBucketsGranted,INTEGER,read-only,,mandatory,,The number of discrete sampling intervals
.1.3.6.1.4.1.11.2.3.7.11.12.1.4.28.1.1.5,HP-SN-SW-L4-SWITCH-GROUP-MIB::snL4RealServerHistoryControlInterval,INTEGER,read-write,,mandatory,,The interval in seconds over which the data is
.1.3.6.1.4.1.11.2.3.7.11.12.1.4.28.1.1.6,HP-SN-SW-L4-SWITCH-GROUP-MIB::snL4RealServerHistoryControlOwner,OCTET,read-write,,mandatory,,The entity that configured this entry and is
.1.3.6.1.4.1.11.2.3.7.11.12.1.4.28.1.1.7,HP-SN-SW-L4-SWITCH-GROUP-MIB::snL4RealServerHistoryControlStatus,INTEGER,read-write,,mandatory,valid(1):createRequest(2):underCreation(3):invalid(4),The status of this snL4RealServerHistoryControl entry.
.1.3.6.1.4.1.11.2.3.7.11.12.1.4.28.2,HP-SN-SW-L4-SWITCH-GROUP-MIB::snL4RealServerHistoryTable,,not-accessible,,mandatory,,A list of Ethernet snL4History entries.
.1.3.6.1.4.1.11.2.3.7.11.12.1.4.28.2.1,HP-SN-SW-L4-SWITCH-GROUP-MIB::snL4RealServerHistoryEntry,,not-accessible,snL4RealServerHistoryIndex:snL4RealServerHistorySampleIndex,mandatory,,An historical sample of Ethernet statistics on a
.1.3.6.1.4.1.11.2.3.7.11.12.1.4.28.2.1.1,HP-SN-SW-L4-SWITCH-GROUP-MIB::snL4RealServerHistoryIndex,INTEGER,read-only,,mandatory,,The snL4RealServerHistory of which this entry is a part.The
.1.3.6.1.4.1.11.2.3.7.11.12.1.4.28.2.1.2,HP-SN-SW-L4-SWITCH-GROUP-MIB::snL4RealServerHistorySampleIndex,INTEGER,read-only,,mandatory,,An index that uniquely identifies the particular
.1.3.6.1.4.1.11.2.3.7.11.12.1.4.28.2.1.3,HP-SN-SW-L4-SWITCH-GROUP-MIB::snL4RealServerHistoryIntervalStart,TimeTicks,read-only,,mandatory,,The value of sysUpTime at the start of the interval
.1.3.6.1.4.1.11.2.3.7.11.12.1.4.28.2.1.4,HP-SN-SW-L4-SWITCH-GROUP-MIB::snL4RealServerHistoryReceivePkts,Counter32,read-only,,mandatory,,
.1.3.6.1.4.1.11.2.3.7.11.12.1.4.28.2.1.5,HP-SN-SW-L4-SWITCH-GROUP-MIB::snL4RealServerHistoryTransmitPkts,Counter32,read-only,,mandatory,,
.1.3.6.1.4.1.11.2.3.7.11.12.1.4.28.2.1.6,HP-SN-SW-L4-SWITCH-GROUP-MIB::snL4RealServerHistoryTotalConnections,Counter32,read-only,,mandatory,,
.1.3.6.1.4.1.11.2.3.7.11.12.1.4.28.2.1.7,HP-SN-SW-L4-SWITCH-GROUP-MIB::snL4RealServerHistoryCurConnections,INTEGER,read-only,,mandatory,,
.1.3.6.1.4.1.11.2.3.7.11.12.1.4.28.2.1.8,HP-SN-SW-L4-SWITCH-GROUP-MIB::snL4RealServerHistoryPeakConnections,INTEGER,read-only,,mandatory,,
.1.3.6.1.4.1.11.2.3.7.11.12.1.4.28.2.1.9,HP-SN-SW-L4-SWITCH-GROUP-MIB::snL4RealServerHistoryReassignments,INTEGER,read-only,,mandatory,,
.1.3.6.1.4.1.11.2.3.7.11.12.1.4.28.3,HP-SN-SW-L4-SWITCH-GROUP-MIB::snL4RealServerPortHistoryControlTable,,not-accessible,,mandatory,,A list of history control entries.
.1.3.6.1.4.1.11.2.3.7.11.12.1.4.28.3.1,HP-SN-SW-L4-SWITCH-GROUP-MIB::snL4RealServerPortHistoryControlEntry,,not-accessible,snL4RealServerPortHistoryControlIndex,mandatory,,A list of parameters that set up a periodic sampling
.1.3.6.1.4.1.11.2.3.7.11.12.1.4.28.3.1.1,HP-SN-SW-L4-SWITCH-GROUP-MIB::snL4RealServerPortHistoryControlIndex,INTEGER,read-only,,mandatory,,An index that uniquely identifies an entry in the
.1.3.6.1.4.1.11.2.3.7.11.12.1.4.28.3.1.2,HP-SN-SW-L4-SWITCH-GROUP-MIB::snL4RealServerPortHistoryControlDataSource,OBJECT,read-write,,mandatory,,This object identifies the source of the data for
.1.3.6.1.4.1.11.2.3.7.11.12.1.4.28.3.1.3,HP-SN-SW-L4-SWITCH-GROUP-MIB::snL4RealServerPortHistoryControlBucketsRequested,INTEGER,read-write,,mandatory,,The requested number of discrete time intervals
.1.3.6.1.4.1.11.2.3.7.11.12.1.4.28.3.1.4,HP-SN-SW-L4-SWITCH-GROUP-MIB::snL4RealServerPortHistoryControlBucketsGranted,INTEGER,read-only,,mandatory,,The number of discrete sampling intervals
.1.3.6.1.4.1.11.2.3.7.11.12.1.4.28.3.1.5,HP-SN-SW-L4-SWITCH-GROUP-MIB::snL4RealServerPortHistoryControlInterval,INTEGER,read-write,,mandatory,,The interval in seconds over which the data is
.1.3.6.1.4.1.11.2.3.7.11.12.1.4.28.3.1.6,HP-SN-SW-L4-SWITCH-GROUP-MIB::snL4RealServerPortHistoryControlOwner,OCTET,read-write,,mandatory,,The entity that configured this entry and is
.1.3.6.1.4.1.11.2.3.7.11.12.1.4.28.3.1.7,HP-SN-SW-L4-SWITCH-GROUP-MIB::snL4RealServerPortHistoryControlStatus,INTEGER,read-write,,mandatory,valid(1):createRequest(2):underCreation(3):invalid(4),The status of this snL4RealServerPortHistoryControl entry.
.1.3.6.1.4.1.11.2.3.7.11.12.1.4.28.4,HP-SN-SW-L4-SWITCH-GROUP-MIB::snL4RealServerPortHistoryTable,,not-accessible,,mandatory,,A list of Ethernet snL4History entries.
.1.3.6.1.4.1.11.2.3.7.11.12.1.4.28.4.1,HP-SN-SW-L4-SWITCH-GROUP-MIB::snL4RealServerPortHistoryEntry,,not-accessible,snL4RealServerPortHistoryIndex:snL4RealServerPortHistorySampleIndex,mandatory,,An historical sample of Ethernet statistics on a
.1.3.6.1.4.1.11.2.3.7.11.12.1.4.28.4.1.1,HP-SN-SW-L4-SWITCH-GROUP-MIB::snL4RealServerPortHistoryIndex,INTEGER,read-only,,mandatory,,The snL4RealServerPortHistory of which this entry is a part.The
.1.3.6.1.4.1.11.2.3.7.11.12.1.4.28.4.1.2,HP-SN-SW-L4-SWITCH-GROUP-MIB::snL4RealServerPortHistorySampleIndex,INTEGER,read-only,,mandatory,,An index that uniquely identifies the particular
.1.3.6.1.4.1.11.2.3.7.11.12.1.4.28.4.1.3,HP-SN-SW-L4-SWITCH-GROUP-MIB::snL4RealServerPortHistoryIntervalStart,TimeTicks,read-only,,mandatory,,The value of sysUpTime at the start of the interval
.1.3.6.1.4.1.11.2.3.7.11.12.1.4.28.4.1.4,HP-SN-SW-L4-SWITCH-GROUP-MIB::snL4RealServerPortHistoryReceivePkts,Counter32,read-only,,mandatory,,
.1.3.6.1.4.1.11.2.3.7.11.12.1.4.28.4.1.5,HP-SN-SW-L4-SWITCH-GROUP-MIB::snL4RealServerPortHistoryTransmitPkts,Counter32,read-only,,mandatory,,
.1.3.6.1.4.1.11.2.3.7.11.12.1.4.28.4.1.6,HP-SN-SW-L4-SWITCH-GROUP-MIB::snL4RealServerPortHistoryTotalConnections,Counter32,read-only,,mandatory,,
.1.3.6.1.4.1.11.2.3.7.11.12.1.4.28.4.1.7,HP-SN-SW-L4-SWITCH-GROUP-MIB::snL4RealServerPortHistoryCurConnections,INTEGER,read-only,,mandatory,,
.1.3.6.1.4.1.11.2.3.7.11.12.1.4.28.4.1.8,HP-SN-SW-L4-SWITCH-GROUP-MIB::snL4RealServerPortHistoryPeakConnections,INTEGER,read-only,,mandatory,,
.1.3.6.1.4.1.11.2.3.7.11.12.1.4.28.4.1.9,HP-SN-SW-L4-SWITCH-GROUP-MIB::snL4RealServerPortHistoryResponseTime,INTEGER,read-only,,mandatory,,
.1.3.6.1.4.1.11.2.3.7.11.12.1.4.28.5,HP-SN-SW-L4-SWITCH-GROUP-MIB::snL4VirtualServerHistoryControlTable,,not-accessible,,mandatory,,A list of history control entries.
.1.3.6.1.4.1.11.2.3.7.11.12.1.4.28.5.1,HP-SN-SW-L4-SWITCH-GROUP-MIB::snL4VirtualServerHistoryControlEntry,,not-accessible,snL4VirtualServerHistoryControlIndex,mandatory,,A list of parameters that set up a periodic sampling
.1.3.6.1.4.1.11.2.3.7.11.12.1.4.28.5.1.1,HP-SN-SW-L4-SWITCH-GROUP-MIB::snL4VirtualServerHistoryControlIndex,INTEGER,read-only,,mandatory,,An index that uniquely identifies an entry in the
.1.3.6.1.4.1.11.2.3.7.11.12.1.4.28.5.1.2,HP-SN-SW-L4-SWITCH-GROUP-MIB::snL4VirtualServerHistoryControlDataSource,OBJECT,read-write,,mandatory,,This object identifies the source of the data for
.1.3.6.1.4.1.11.2.3.7.11.12.1.4.28.5.1.3,HP-SN-SW-L4-SWITCH-GROUP-MIB::snL4VirtualServerHistoryControlBucketsRequested,INTEGER,read-write,,mandatory,,The requested number of discrete time intervals
.1.3.6.1.4.1.11.2.3.7.11.12.1.4.28.5.1.4,HP-SN-SW-L4-SWITCH-GROUP-MIB::snL4VirtualServerHistoryControlBucketsGranted,INTEGER,read-only,,mandatory,,The number of discrete sampling intervals
.1.3.6.1.4.1.11.2.3.7.11.12.1.4.28.5.1.5,HP-SN-SW-L4-SWITCH-GROUP-MIB::snL4VirtualServerHistoryControlInterval,INTEGER,read-write,,mandatory,,The interval in seconds over which the data is
.1.3.6.1.4.1.11.2.3.7.11.12.1.4.28.5.1.6,HP-SN-SW-L4-SWITCH-GROUP-MIB::snL4VirtualServerHistoryControlOwner,OCTET,read-write,,mandatory,,The entity that configured this entry and is
.1.3.6.1.4.1.11.2.3.7.11.12.1.4.28.5.1.7,HP-SN-SW-L4-SWITCH-GROUP-MIB::snL4VirtualServerHistoryControlStatus,INTEGER,read-write,,mandatory,valid(1):createRequest(2):underCreation(3):invalid(4),The status of this snL4VirtualServerHistoryControl entry.
.1.3.6.1.4.1.11.2.3.7.11.12.1.4.28.6,HP-SN-SW-L4-SWITCH-GROUP-MIB::snL4VirtualServerHistoryTable,,not-accessible,,mandatory,,A list of Ethernet snL4History entries.
.1.3.6.1.4.1.11.2.3.7.11.12.1.4.28.6.1,HP-SN-SW-L4-SWITCH-GROUP-MIB::snL4VirtualServerHistoryEntry,,not-accessible,snL4VirtualServerHistoryIndex:snL4VirtualServerHistorySampleIndex,mandatory,,An historical sample of Ethernet statistics on a
.1.3.6.1.4.1.11.2.3.7.11.12.1.4.28.6.1.1,HP-SN-SW-L4-SWITCH-GROUP-MIB::snL4VirtualServerHistoryIndex,INTEGER,read-only,,mandatory,,The snL4VirtualServerHistory of which this entry is a part.The
.1.3.6.1.4.1.11.2.3.7.11.12.1.4.28.6.1.2,HP-SN-SW-L4-SWITCH-GROUP-MIB::snL4VirtualServerHistorySampleIndex,INTEGER,read-only,,mandatory,,An index that uniquely identifies the particular
.1.3.6.1.4.1.11.2.3.7.11.12.1.4.28.6.1.3,HP-SN-SW-L4-SWITCH-GROUP-MIB::snL4VirtualServerHistoryIntervalStart,TimeTicks,read-only,,mandatory,,The value of sysUpTime at the start of the interval
.1.3.6.1.4.1.11.2.3.7.11.12.1.4.28.6.1.4,HP-SN-SW-L4-SWITCH-GROUP-MIB::snL4VirtualServerHistoryReceivePkts,Counter32,read-only,,mandatory,,
.1.3.6.1.4.1.11.2.3.7.11.12.1.4.28.6.1.5,HP-SN-SW-L4-SWITCH-GROUP-MIB::snL4VirtualServerHistoryTransmitPkts,Counter32,read-only,,mandatory,,
.1.3.6.1.4.1.11.2.3.7.11.12.1.4.28.6.1.6,HP-SN-SW-L4-SWITCH-GROUP-MIB::snL4VirtualServerHistoryTotalConnections,Counter32,read-only,,mandatory,,
.1.3.6.1.4.1.11.2.3.7.11.12.1.4.28.6.1.7,HP-SN-SW-L4-SWITCH-GROUP-MIB::snL4VirtualServerHistoryCurConnections,INTEGER,read-only,,mandatory,,
.1.3.6.1.4.1.11.2.3.7.11.12.1.4.28.6.1.8,HP-SN-SW-L4-SWITCH-GROUP-MIB::snL4VirtualServerHistoryPeakConnections,INTEGER,read-only,,mandatory,,
.1.3.6.1.4.1.11.2.3.7.11.12.1.4.28.7,HP-SN-SW-L4-SWITCH-GROUP-MIB::snL4VirtualServerPortHistoryControlTable,,not-accessible,,mandatory,,A list of history control entries.
.1.3.6.1.4.1.11.2.3.7.11.12.1.4.28.7.1,HP-SN-SW-L4-SWITCH-GROUP-MIB::snL4VirtualServerPortHistoryControlEntry,,not-accessible,snL4VirtualServerPortHistoryControlIndex,mandatory,,A list of parameters that set up a periodic sampling
.1.3.6.1.4.1.11.2.3.7.11.12.1.4.28.7.1.1,HP-SN-SW-L4-SWITCH-GROUP-MIB::snL4VirtualServerPortHistoryControlIndex,INTEGER,read-only,,mandatory,,An index that uniquely identifies an entry in the
.1.3.6.1.4.1.11.2.3.7.11.12.1.4.28.7.1.2,HP-SN-SW-L4-SWITCH-GROUP-MIB::snL4VirtualServerPortHistoryControlDataSource,OBJECT,read-write,,mandatory,,This object identifies the source of the data for
.1.3.6.1.4.1.11.2.3.7.11.12.1.4.28.7.1.3,HP-SN-SW-L4-SWITCH-GROUP-MIB::snL4VirtualServerPortHistoryControlBucketsRequested,INTEGER,read-write,,mandatory,,The requested number of discrete time intervals
.1.3.6.1.4.1.11.2.3.7.11.12.1.4.28.7.1.4,HP-SN-SW-L4-SWITCH-GROUP-MIB::snL4VirtualServerPortHistoryControlBucketsGranted,INTEGER,read-only,,mandatory,,The number of discrete sampling intervals
.1.3.6.1.4.1.11.2.3.7.11.12.1.4.28.7.1.5,HP-SN-SW-L4-SWITCH-GROUP-MIB::snL4VirtualServerPortHistoryControlInterval,INTEGER,read-write,,mandatory,,The interval in seconds over which the data is
.1.3.6.1.4.1.11.2.3.7.11.12.1.4.28.7.1.6,HP-SN-SW-L4-SWITCH-GROUP-MIB::snL4VirtualServerPortHistoryControlOwner,OCTET,read-write,,mandatory,,The entity that configured this entry and is
.1.3.6.1.4.1.11.2.3.7.11.12.1.4.28.7.1.7,HP-SN-SW-L4-SWITCH-GROUP-MIB::snL4VirtualServerPortHistoryControlStatus,INTEGER,read-write,,mandatory,valid(1):createRequest(2):underCreation(3):invalid(4),The status of this snL4VirtualServerPortHistoryControl entry.
.1.3.6.1.4.1.11.2.3.7.11.12.1.4.28.8,HP-SN-SW-L4-SWITCH-GROUP-MIB::snL4VirtualServerPortHistoryTable,,not-accessible,,mandatory,,A list of Ethernet snL4History entries.
.1.3.6.1.4.1.11.2.3.7.11.12.1.4.28.8.1,HP-SN-SW-L4-SWITCH-GROUP-MIB::snL4VirtualServerPortHistoryEntry,,not-accessible,snL4VirtualServerPortHistoryIndex:snL4VirtualServerPortHistorySampleIndex,mandatory,,An historical sample of Ethernet statistics on a
.1.3.6.1.4.1.11.2.3.7.11.12.1.4.28.8.1.1,HP-SN-SW-L4-SWITCH-GROUP-MIB::snL4VirtualServerPortHistoryIndex,INTEGER,read-only,,mandatory,,The snL4VirtualServerPortHistory of which this entry is a part.The
.1.3.6.1.4.1.11.2.3.7.11.12.1.4.28.8.1.2,HP-SN-SW-L4-SWITCH-GROUP-MIB::snL4VirtualServerPortHistorySampleIndex,INTEGER,read-only,,mandatory,,An index that uniquely identifies the particular
.1.3.6.1.4.1.11.2.3.7.11.12.1.4.28.8.1.3,HP-SN-SW-L4-SWITCH-GROUP-MIB::snL4VirtualServerPortHistoryIntervalStart,TimeTicks,read-only,,mandatory,,The value of sysUpTime at the start of the interval
.1.3.6.1.4.1.11.2.3.7.11.12.1.4.28.8.1.4,HP-SN-SW-L4-SWITCH-GROUP-MIB::snL4VirtualServerPortHistoryReceivePkts,Counter32,read-only,,mandatory,,
.1.3.6.1.4.1.11.2.3.7.11.12.1.4.28.8.1.5,HP-SN-SW-L4-SWITCH-GROUP-MIB::snL4VirtualServerPortHistoryTransmitPkts,Counter32,read-only,,mandatory,,
.1.3.6.1.4.1.11.2.3.7.11.12.1.4.28.8.1.6,HP-SN-SW-L4-SWITCH-GROUP-MIB::snL4VirtualServerPortHistoryTotalConnections,Counter32,read-only,,mandatory,,
.1.3.6.1.4.1.11.2.3.7.11.12.1.4.28.8.1.7,HP-SN-SW-L4-SWITCH-GROUP-MIB::snL4VirtualServerPortHistoryCurConnections,INTEGER,read-only,,mandatory,,
.1.3.6.1.4.1.11.2.3.7.11.12.1.4.28.8.1.8,HP-SN-SW-L4-SWITCH-GROUP-MIB::snL4VirtualServerPortHistoryPeakConnections,INTEGER,read-only,,mandatory,,
.1.3.6.1.4.1.11.2.3.7.11.12.1.5,HP-SN-ROOT-MIB::snStack,,,,,,
.1.3.6.1.4.1.11.2.3.7.11.12.1.5.1,HP-SN-AGENT-MIB::snStackGen,,,,,,
.1.3.6.1.4.1.11.2.3.7.11.12.1.5.1.1,HP-SN-AGENT-MIB::snStackPriSwitchMode,INTEGER,read-write,,mandatory,disabled(0):enabled(1),The Stackable Management Primary Switch mode
.1.3.6.1.4.1.11.2.3.7.11.12.1.5.1.2,HP-SN-AGENT-MIB::snStackMaxSecSwitch,INTEGER,read-only,,mandatory,,The Maximum Secondary Switches are allowed in the
.1.3.6.1.4.1.11.2.3.7.11.12.1.5.1.3,HP-SN-AGENT-MIB::snStackTotalSecSwitch,INTEGER,read-only,,mandatory,,The Total Secondary Switches currently connected to the
.1.3.6.1.4.1.11.2.3.7.11.12.1.5.1.4,HP-SN-AGENT-MIB::snStackSyncAllSecSwitch,INTEGER,read-write,,mandatory,normal(0):invalid(1):device(2):global(3):local(4),Synchronize all the secondary switches in the
.1.3.6.1.4.1.11.2.3.7.11.12.1.5.1.5,HP-SN-AGENT-MIB::snStackSmSlotIndex,INTEGER,read-write,,mandatory,,The Slot 0 is the Master slot and Slot 1-8 are slaves. 
.1.3.6.1.4.1.11.2.3.7.11.12.1.5.1.6,HP-SN-AGENT-MIB::snStackFmpSetProcess,INTEGER,read-only,,mandatory,normal(0):pending(1):failure(2),normal(0) - The set process is either in an idle state or FMP-SET-SUCCESS state.
.1.3.6.1.4.1.11.2.3.7.11.12.1.5.2,HP-SN-AGENT-MIB::snStackSecSwitchInfo,,,,,,
.1.3.6.1.4.1.11.2.3.7.11.12.1.5.2.1,HP-SN-AGENT-MIB::snStackSecSwitchTable,,not-accessible,,mandatory,,If snSwGroupOperMode is configured as basic mode
.1.3.6.1.4.1.11.2.3.7.11.12.1.5.2.1.1,HP-SN-AGENT-MIB::snStackSecSwitchEntry,,not-accessible,snStackSecSwitchIndex,mandatory,,An entry in the Stackable Management Secondary Switch 
.1.3.6.1.4.1.11.2.3.7.11.12.1.5.2.1.1.1,HP-SN-AGENT-MIB::snStackSecSwitchIndex,INTEGER,read-only,,mandatory,,The secondary switch index must not be greater than the snStackMaxSecSwitch.
.1.3.6.1.4.1.11.2.3.7.11.12.1.5.2.1.1.2,HP-SN-AGENT-MIB::snStackSecSwitchSlotId,INTEGER,read-write,,mandatory,,The secondary switch slot ID must be set before the Configuration 
.1.3.6.1.4.1.11.2.3.7.11.12.1.5.2.1.1.3,HP-SN-AGENT-MIB::snStackSecSwitchPortCnts,INTEGER,read-only,,mandatory,,The number of ports in this secondary switch.
.1.3.6.1.4.1.11.2.3.7.11.12.1.5.2.1.1.4,HP-SN-AGENT-MIB::snStackSecSwitchEnabled,INTEGER,read-write,,mandatory,disabled(0):enabled(1),The secondary switch has been selected to Stackable Management Group.
.1.3.6.1.4.1.11.2.3.7.11.12.1.5.2.1.1.5,HP-SN-AGENT-MIB::snStackSecSwitchAck,INTEGER,read-only,,mandatory,disabled(0):enabled(1),The secondary switch has sent reponse to the primary switch.
.1.3.6.1.4.1.11.2.3.7.11.12.1.5.2.1.1.6,HP-SN-AGENT-MIB::snStackSecSwitchMacAddr,OCTET,read-only,,mandatory,,The secondary switch physical address. The physical address 
.1.3.6.1.4.1.11.2.3.7.11.12.1.5.2.1.1.7,HP-SN-AGENT-MIB::snStackSecSwitchSyncCmd,INTEGER,read-write,,mandatory,normal(0):invalid(1):device(2):global(3):local(4),Synchronize the secondary switches in the
.1.3.6.1.4.1.11.2.3.7.11.12.1.5.2.1.1.8,HP-SN-AGENT-MIB::snStackSecSwitchIpAddr,IpAddress,read-write,,mandatory,,The secondary switch IP Address and is used for 
.1.3.6.1.4.1.11.2.3.7.11.12.1.5.2.1.1.9,HP-SN-AGENT-MIB::snStackSecSwitchSubnetMask,IpAddress,read-write,,mandatory,,The secondary switch IP Subnet Mask and is used for 
.1.3.6.1.4.1.11.2.3.7.11.12.1.5.2.1.1.10,HP-SN-AGENT-MIB::snStackSecSwitchCfgCmd,INTEGER,read-write,,mandatory,normal(0):invalid(1):auto(2):manual(3),snStackSecSwitchSlotId must be set before the Configuration 
.1.3.6.1.4.1.11.2.3.7.11.12.2,HP-SN-ROOT-MIB::router,,,,,,
.1.3.6.1.4.1.11.2.3.7.11.12.2.1,HP-SN-ROOT-MIB::snIpx,,,,,,
.1.3.6.1.4.1.11.2.3.7.11.12.2.1.1,HP-SN-IPX-MIB::snIpxGen,,,,,,
.1.3.6.1.4.1.11.2.3.7.11.12.2.1.1.1,HP-SN-IPX-MIB::snIpxRoutingMode,INTEGER,read-write,,mandatory,disabled(0):enabled(1),Enabled/Disabled System IPX Routing Mode status.
.1.3.6.1.4.1.11.2.3.7.11.12.2.1.1.2,HP-SN-IPX-MIB::snIpxNetBiosFilterMode,INTEGER,read-write,,mandatory,disabled(0):enabled(1),Enabled/Disabled NetBios Filter Mode status.
.1.3.6.1.4.1.11.2.3.7.11.12.2.1.1.3,HP-SN-IPX-MIB::snIpxClearCache,INTEGER,read-write,,mandatory,normal(0):clear(1),clear(1) will clear cache table.
.1.3.6.1.4.1.11.2.3.7.11.12.2.1.1.4,HP-SN-IPX-MIB::snIpxClearRoute,INTEGER,read-write,,mandatory,normal(0):clear(1),clear(1) will clear ipx route table.
.1.3.6.1.4.1.11.2.3.7.11.12.2.1.1.5,HP-SN-IPX-MIB::snIpxClearTrafficCnts,INTEGER,read-write,,mandatory,normal(0):clear(1),clear(1) will clear ipx all traffic counters.
.1.3.6.1.4.1.11.2.3.7.11.12.2.1.1.6,HP-SN-IPX-MIB::snIpxRcvPktsCnt,Counter32,read-only,,mandatory,,IPX incoming packets counter.
.1.3.6.1.4.1.11.2.3.7.11.12.2.1.1.7,HP-SN-IPX-MIB::snIpxTxPktsCnt,Counter32,read-only,,mandatory,,IPX Outgoing packets counter.
.1.3.6.1.4.1.11.2.3.7.11.12.2.1.1.8,HP-SN-IPX-MIB::snIpxFwdPktsCnt,Counter32,read-only,,mandatory,,IPX forwarding packets counter.
.1.3.6.1.4.1.11.2.3.7.11.12.2.1.1.9,HP-SN-IPX-MIB::snIpxRcvDropPktsCnt,Counter32,read-only,,mandatory,,IPX receiving drop packets counter.
.1.3.6.1.4.1.11.2.3.7.11.12.2.1.1.10,HP-SN-IPX-MIB::snIpxRcvFiltPktsCnt,Counter32,read-only,,mandatory,,IPX receiving filter packets counter.
.1.3.6.1.4.1.11.2.3.7.11.12.2.1.1.11,HP-SN-IPX-MIB::snIpxRipGblFiltList,OCTET,read-write,,mandatory,,An IPX RIP Global Filter List.
.1.3.6.1.4.1.11.2.3.7.11.12.2.1.1.12,HP-SN-IPX-MIB::snIpxRipFiltOnAllPort,INTEGER,read-write,,mandatory,valid(1):deleteAllInBound(2):deleteAllOutBound(3):addAllInBound(4):addAllOutBound(5),Apply the IPX RIP Global filter list snIpxRipGblFiltList to  deleteAllInBound(2)...delete all in-bound filter lists from all ports. 
.1.3.6.1.4.1.11.2.3.7.11.12.2.1.1.13,HP-SN-IPX-MIB::snIpxSapGblFiltList,OCTET,read-write,,mandatory,,An IPX SAP Global Filter List.
.1.3.6.1.4.1.11.2.3.7.11.12.2.1.1.14,HP-SN-IPX-MIB::snIpxSapFiltOnAllPort,INTEGER,read-write,,mandatory,valid(1):deleteAllInBound(2):deleteAllOutBound(3):addAllInBound(4):addAllOutBound(5),Apply the IPX SAP Global filter list snIpxSapGblFiltList to  deleteAllInBound(2)...delete all in-bound filter lists from all ports. 
.1.3.6.1.4.1.11.2.3.7.11.12.2.1.1.15,HP-SN-IPX-MIB::snIpxTxDropPktsCnt,Counter32,read-only,,mandatory,,IPX transmitting drop packets counter.
.1.3.6.1.4.1.11.2.3.7.11.12.2.1.1.16,HP-SN-IPX-MIB::snIpxTxFiltPktsCnt,Counter32,read-only,,mandatory,,IPX transmitting filter packets counter.
.1.3.6.1.4.1.11.2.3.7.11.12.2.1.2,HP-SN-IPX-MIB::snIpxCache,,,,,,
.1.3.6.1.4.1.11.2.3.7.11.12.2.1.2.1,HP-SN-IPX-MIB::snIpxCacheTable,,not-accessible,,mandatory,,IPX Cache table.
.1.3.6.1.4.1.11.2.3.7.11.12.2.1.2.1.1,HP-SN-IPX-MIB::snIpxCacheEntry,,not-accessible,snIpxCacheIndex,mandatory,,An entry in the IPX Cache table.
.1.3.6.1.4.1.11.2.3.7.11.12.2.1.2.1.1.1,HP-SN-IPX-MIB::snIpxCacheIndex,INTEGER,read-only,,mandatory,,The table index for a IPX Cache entry.
.1.3.6.1.4.1.11.2.3.7.11.12.2.1.2.1.1.2,HP-SN-IPX-MIB::snIpxCacheNetNum,OCTET,read-only,,mandatory,,Cache Network number.
.1.3.6.1.4.1.11.2.3.7.11.12.2.1.2.1.1.3,HP-SN-IPX-MIB::snIpxCacheNode,OCTET,read-only,,mandatory,,Cache Node Number.
.1.3.6.1.4.1.11.2.3.7.11.12.2.1.2.1.1.4,HP-SN-IPX-MIB::snIpxCacheOutFilter,INTEGER,read-only,,mandatory,disabled(0):enabled(1),Cache Outbound Filter is ether disabled(0) or enabled(1).
.1.3.6.1.4.1.11.2.3.7.11.12.2.1.2.1.1.5,HP-SN-IPX-MIB::snIpxCacheEncap,INTEGER,read-only,,mandatory,ethernetII(1):ethernet8022(2):ethernet8023(3):ethernetSnap(4),The IPX encapsulation frame type.
.1.3.6.1.4.1.11.2.3.7.11.12.2.1.2.1.1.6,HP-SN-IPX-MIB::snIpxCachePort,INTEGER,read-only,,mandatory,,IPX Router Port number.
.1.3.6.1.4.1.11.2.3.7.11.12.2.1.3,HP-SN-IPX-MIB::snIpxRoute,,,,,,
.1.3.6.1.4.1.11.2.3.7.11.12.2.1.3.1,HP-SN-IPX-MIB::snIpxRouteTable,,not-accessible,,mandatory,,IPX route table.
.1.3.6.1.4.1.11.2.3.7.11.12.2.1.3.1.1,HP-SN-IPX-MIB::snIpxRouteEntry,,not-accessible,snIpxRouteIndex,mandatory,,An entry in the IPX route table.
.1.3.6.1.4.1.11.2.3.7.11.12.2.1.3.1.1.1,HP-SN-IPX-MIB::snIpxRouteIndex,INTEGER,read-only,,mandatory,,The table index for a IPX route entry.
.1.3.6.1.4.1.11.2.3.7.11.12.2.1.3.1.1.2,HP-SN-IPX-MIB::snIpxDestNetNum,OCTET,read-only,,mandatory,,Destination Network number.
.1.3.6.1.4.1.11.2.3.7.11.12.2.1.3.1.1.3,HP-SN-IPX-MIB::snIpxFwdRouterNode,OCTET,read-only,,mandatory,,Forward Router Node Number.
.1.3.6.1.4.1.11.2.3.7.11.12.2.1.3.1.1.4,HP-SN-IPX-MIB::snIpxDestHopCnts,INTEGER,read-only,,mandatory,,Number of hops to reach the
.1.3.6.1.4.1.11.2.3.7.11.12.2.1.3.1.1.5,HP-SN-IPX-MIB::snIpxRouteMetric,INTEGER,read-only,,mandatory,,The metrics to next hop router.
.1.3.6.1.4.1.11.2.3.7.11.12.2.1.3.1.1.6,HP-SN-IPX-MIB::snIpxDestPort,INTEGER,read-only,,mandatory,,The destination port.
.1.3.6.1.4.1.11.2.3.7.11.12.2.1.4,HP-SN-IPX-MIB::snIpxServer,,,,,,
.1.3.6.1.4.1.11.2.3.7.11.12.2.1.4.1,HP-SN-IPX-MIB::snIpxServerTable,,not-accessible,,mandatory,,IPX Server table.
.1.3.6.1.4.1.11.2.3.7.11.12.2.1.4.1.1,HP-SN-IPX-MIB::snIpxServerEntry,,not-accessible,snIpxServerIndex,mandatory,,An entry in the IPX Server table.
.1.3.6.1.4.1.11.2.3.7.11.12.2.1.4.1.1.1,HP-SN-IPX-MIB::snIpxServerIndex,INTEGER,read-only,,mandatory,,The table index for a IPX Server entry.
.1.3.6.1.4.1.11.2.3.7.11.12.2.1.4.1.1.2,HP-SN-IPX-MIB::snIpxServerType,INTEGER,read-only,,mandatory,,IPX Server Type.
.1.3.6.1.4.1.11.2.3.7.11.12.2.1.4.1.1.3,HP-SN-IPX-MIB::snIpxServerNetNum,OCTET,read-only,,mandatory,,Server Network number.
.1.3.6.1.4.1.11.2.3.7.11.12.2.1.4.1.1.4,HP-SN-IPX-MIB::snIpxServerNode,OCTET,read-only,,mandatory,,Server Node Number.
.1.3.6.1.4.1.11.2.3.7.11.12.2.1.4.1.1.5,HP-SN-IPX-MIB::snIpxServerSocket,INTEGER,read-only,,mandatory,,Server Socket Number.
.1.3.6.1.4.1.11.2.3.7.11.12.2.1.4.1.1.6,HP-SN-IPX-MIB::snIpxServerHopCnts,INTEGER,read-only,,mandatory,,Number of intervening networks to reach the
.1.3.6.1.4.1.11.2.3.7.11.12.2.1.4.1.1.7,HP-SN-IPX-MIB::snIpxServerName,OCTET,read-only,,mandatory,,IPX Server Name.
.1.3.6.1.4.1.11.2.3.7.11.12.2.1.5,HP-SN-IPX-MIB::snIpxFwdFilter,,,,,,
.1.3.6.1.4.1.11.2.3.7.11.12.2.1.5.1,HP-SN-IPX-MIB::snIpxFwdFilterTable,,not-accessible,,mandatory,,IPX Forward Filter table.
.1.3.6.1.4.1.11.2.3.7.11.12.2.1.5.1.1,HP-SN-IPX-MIB::snIpxFwdFilterEntry,,not-accessible,snIpxFwdFilterIdx,mandatory,,An entry in the IPX Forward Filter table.
.1.3.6.1.4.1.11.2.3.7.11.12.2.1.5.1.1.1,HP-SN-IPX-MIB::snIpxFwdFilterIdx,INTEGER,read-only,,mandatory,,The filter ID for a filter entry.
.1.3.6.1.4.1.11.2.3.7.11.12.2.1.5.1.1.2,HP-SN-IPX-MIB::snIpxFwdFilterAction,INTEGER,read-write,,mandatory,deny(0):permit(1),Action to take if the ipx packet match
.1.3.6.1.4.1.11.2.3.7.11.12.2.1.5.1.1.3,HP-SN-IPX-MIB::snIpxFwdFilterSocket,INTEGER,read-write,,mandatory,,IPX Forward Filter Socket Number.
.1.3.6.1.4.1.11.2.3.7.11.12.2.1.5.1.1.4,HP-SN-IPX-MIB::snIpxFwdFilterSrcNet,OCTET,read-write,,mandatory,,Source Network Number.
.1.3.6.1.4.1.11.2.3.7.11.12.2.1.5.1.1.5,HP-SN-IPX-MIB::snIpxFwdFilterSrcNode,OCTET,read-write,,mandatory,,Source Node Number.
.1.3.6.1.4.1.11.2.3.7.11.12.2.1.5.1.1.6,HP-SN-IPX-MIB::snIpxFwdFilterDestNet,OCTET,read-write,,mandatory,,Destination Network Number.
.1.3.6.1.4.1.11.2.3.7.11.12.2.1.5.1.1.7,HP-SN-IPX-MIB::snIpxFwdFilterDestNode,OCTET,read-write,,mandatory,,Destination Node Number.
.1.3.6.1.4.1.11.2.3.7.11.12.2.1.5.1.1.8,HP-SN-IPX-MIB::snIpxFwdFilterRowStatus,INTEGER,read-write,,mandatory,invalid(1):valid(2):delete(3):create(4):modify(5),This object is used to create and
.1.3.6.1.4.1.11.2.3.7.11.12.2.1.6,HP-SN-IPX-MIB::snIpxRipFilter,,,,,,
.1.3.6.1.4.1.11.2.3.7.11.12.2.1.6.1,HP-SN-IPX-MIB::snIpxRipFilterTable,,not-accessible,,mandatory,,IPX RIP Filter table.
.1.3.6.1.4.1.11.2.3.7.11.12.2.1.6.1.1,HP-SN-IPX-MIB::snIpxRipFilterEntry,,not-accessible,snIpxRipFilterId,mandatory,,An entry in the IPX RIP Filter table.
.1.3.6.1.4.1.11.2.3.7.11.12.2.1.6.1.1.1,HP-SN-IPX-MIB::snIpxRipFilterId,INTEGER,read-only,,mandatory,,The filter ID for a filter entry.
.1.3.6.1.4.1.11.2.3.7.11.12.2.1.6.1.1.2,HP-SN-IPX-MIB::snIpxRipFilterAction,INTEGER,read-write,,mandatory,deny(0):permit(1),Action to take if the ipx packet match
.1.3.6.1.4.1.11.2.3.7.11.12.2.1.6.1.1.3,HP-SN-IPX-MIB::snIpxRipFilterNet,OCTET,read-write,,mandatory,,IPX RIP Filter Network number.
.1.3.6.1.4.1.11.2.3.7.11.12.2.1.6.1.1.4,HP-SN-IPX-MIB::snIpxRipFilterMask,OCTET,read-write,,mandatory,,IPX RIP Filter Network/Subnet Mask.
.1.3.6.1.4.1.11.2.3.7.11.12.2.1.6.1.1.5,HP-SN-IPX-MIB::snIpxRipFilterRowStatus,INTEGER,read-write,,mandatory,invalid(1):valid(2):delete(3):create(4):modify(5),This object is used to create and
.1.3.6.1.4.1.11.2.3.7.11.12.2.1.7,HP-SN-IPX-MIB::snIpxSapFilter,,,,,,
.1.3.6.1.4.1.11.2.3.7.11.12.2.1.7.1,HP-SN-IPX-MIB::snIpxSapFilterTable,,not-accessible,,mandatory,,IPX SAP Filter table.
.1.3.6.1.4.1.11.2.3.7.11.12.2.1.7.1.1,HP-SN-IPX-MIB::snIpxSapFilterEntry,,not-accessible,snIpxSapFilterId,mandatory,,An entry in the IPX SAP Filter table.
.1.3.6.1.4.1.11.2.3.7.11.12.2.1.7.1.1.1,HP-SN-IPX-MIB::snIpxSapFilterId,INTEGER,read-only,,mandatory,,The filter ID for a filter entry.
.1.3.6.1.4.1.11.2.3.7.11.12.2.1.7.1.1.2,HP-SN-IPX-MIB::snIpxSapFilterAction,INTEGER,read-write,,mandatory,deny(0):permit(1),Action to take if the ipx packet match
.1.3.6.1.4.1.11.2.3.7.11.12.2.1.7.1.1.3,HP-SN-IPX-MIB::snIpxSapFilterType,INTEGER,read-write,,mandatory,,IPX SAP Filter type to be matched.
.1.3.6.1.4.1.11.2.3.7.11.12.2.1.7.1.1.4,HP-SN-IPX-MIB::snIpxSapFilterName,OCTET,read-write,,mandatory,,IPX SAP Filter Name.
.1.3.6.1.4.1.11.2.3.7.11.12.2.1.7.1.1.5,HP-SN-IPX-MIB::snIpxSapFilterRowStatus,INTEGER,read-write,,mandatory,invalid(1):valid(2):delete(3):create(4):modify(5),This object is used to create and
.1.3.6.1.4.1.11.2.3.7.11.12.2.1.8,HP-SN-IPX-MIB::snIpxIfFwdAccess,,,,,,
.1.3.6.1.4.1.11.2.3.7.11.12.2.1.8.1,HP-SN-IPX-MIB::snIpxIfFwdAccessTable,,not-accessible,,mandatory,,IPX IF Forward Access table.
.1.3.6.1.4.1.11.2.3.7.11.12.2.1.8.1.1,HP-SN-IPX-MIB::snIpxIfFwdAccessEntry,,not-accessible,snIpxIfFwdAccessPort:snIpxIfFwdAccessDir,mandatory,,An entry in the IPX Forward Access table.
.1.3.6.1.4.1.11.2.3.7.11.12.2.1.8.1.1.1,HP-SN-IPX-MIB::snIpxIfFwdAccessPort,INTEGER,read-only,,mandatory,,The IPX interface to which the Forward Filter applies.
.1.3.6.1.4.1.11.2.3.7.11.12.2.1.8.1.1.2,HP-SN-IPX-MIB::snIpxIfFwdAccessDir,INTEGER,read-only,,mandatory,in(1):out(2),The access direction of incoming packet filter
.1.3.6.1.4.1.11.2.3.7.11.12.2.1.8.1.1.3,HP-SN-IPX-MIB::snIpxIfFwdAccessFilterList,OCTET,read-write,,mandatory,,An IPX IF Forward Filter List.
.1.3.6.1.4.1.11.2.3.7.11.12.2.1.8.1.1.4,HP-SN-IPX-MIB::snIpxIfFwdAccessRowStatus,INTEGER,read-write,,mandatory,invalid(1):valid(2):delete(3):create(4):modify(5),This object is used to create and
.1.3.6.1.4.1.11.2.3.7.11.12.2.1.9,HP-SN-IPX-MIB::snIpxIfRipAccess,,,,,,
.1.3.6.1.4.1.11.2.3.7.11.12.2.1.9.1,HP-SN-IPX-MIB::snIpxIfRipAccessTable,,not-accessible,,mandatory,,IPX IF RIP Access table.
.1.3.6.1.4.1.11.2.3.7.11.12.2.1.9.1.1,HP-SN-IPX-MIB::snIpxIfRipAccessEntry,,not-accessible,snIpxIfRipAccessPort:snIpxIfRipAccessDir,mandatory,,An entry in the IPX Forward Access table.
.1.3.6.1.4.1.11.2.3.7.11.12.2.1.9.1.1.1,HP-SN-IPX-MIB::snIpxIfRipAccessPort,INTEGER,read-only,,mandatory,,The IPX interface to which the RIP Filter applies.
.1.3.6.1.4.1.11.2.3.7.11.12.2.1.9.1.1.2,HP-SN-IPX-MIB::snIpxIfRipAccessDir,INTEGER,read-only,,mandatory,in(1):out(2),The access direction of incoming packet filter
.1.3.6.1.4.1.11.2.3.7.11.12.2.1.9.1.1.3,HP-SN-IPX-MIB::snIpxIfRipAccessFilterList,OCTET,read-write,,mandatory,,An IPX IF RIP Access Filter List.
.1.3.6.1.4.1.11.2.3.7.11.12.2.1.9.1.1.4,HP-SN-IPX-MIB::snIpxIfRipAccessRowStatus,INTEGER,read-write,,mandatory,invalid(1):valid(2):delete(3):create(4):modify(5),This object is used to create and
.1.3.6.1.4.1.11.2.3.7.11.12.2.1.10,HP-SN-IPX-MIB::snIpxIfSapAccess,,,,,,
.1.3.6.1.4.1.11.2.3.7.11.12.2.1.10.1,HP-SN-IPX-MIB::snIpxIfSapAccessTable,,not-accessible,,mandatory,,IPX IF RIP Access table.
.1.3.6.1.4.1.11.2.3.7.11.12.2.1.10.1.1,HP-SN-IPX-MIB::snIpxIfSapAccessEntry,,not-accessible,snIpxIfSapAccessPort:snIpxIfSapAccessDir,mandatory,,An entry in the IPX Forward Access table.
.1.3.6.1.4.1.11.2.3.7.11.12.2.1.10.1.1.1,HP-SN-IPX-MIB::snIpxIfSapAccessPort,INTEGER,read-only,,mandatory,,The IPX interface to which the SAP Filter applies.
.1.3.6.1.4.1.11.2.3.7.11.12.2.1.10.1.1.2,HP-SN-IPX-MIB::snIpxIfSapAccessDir,INTEGER,read-only,,mandatory,in(1):out(2),The access direction of incoming packet filter
.1.3.6.1.4.1.11.2.3.7.11.12.2.1.10.1.1.3,HP-SN-IPX-MIB::snIpxIfSapAccessFilterList,OCTET,read-write,,mandatory,,An IPX IF SAP Access Filter List.
.1.3.6.1.4.1.11.2.3.7.11.12.2.1.10.1.1.4,HP-SN-IPX-MIB::snIpxIfSapAccessRowStatus,INTEGER,read-write,,mandatory,invalid(1):valid(2):delete(3):create(4):modify(5),This object is used to create and
.1.3.6.1.4.1.11.2.3.7.11.12.2.1.11,HP-SN-IPX-MIB::snIpxPortAddr,,,,,,
.1.3.6.1.4.1.11.2.3.7.11.12.2.1.11.1,HP-SN-IPX-MIB::snIpxPortAddrTable,,not-accessible,,mandatory,,IPX port address table.
.1.3.6.1.4.1.11.2.3.7.11.12.2.1.11.1.1,HP-SN-IPX-MIB::snIpxPortAddrEntry,,not-accessible,snIpxPortAddrPort:snIpxPortAddrEncap,mandatory,,An entry in the IPX Port Address table.
.1.3.6.1.4.1.11.2.3.7.11.12.2.1.11.1.1.1,HP-SN-IPX-MIB::snIpxPortAddrPort,INTEGER,read-only,,mandatory,,The port index for port address entry.
.1.3.6.1.4.1.11.2.3.7.11.12.2.1.11.1.1.2,HP-SN-IPX-MIB::snIpxPortAddrEncap,INTEGER,read-only,,mandatory,ethernet8022(1):ethernet8023(2):ethernetII(3):ethernetSnap(4),The IPX encapsulation type.
.1.3.6.1.4.1.11.2.3.7.11.12.2.1.11.1.1.3,HP-SN-IPX-MIB::snIpxPortAddrNetNum,OCTET,read-write,,mandatory,,An unique Network number for the IPX interface port.
.1.3.6.1.4.1.11.2.3.7.11.12.2.1.11.1.1.4,HP-SN-IPX-MIB::snIpxPortAddrRowStatus,INTEGER,read-write,,mandatory,invalid(1):valid(2):delete(3):create(4):modify(5),This object is used to create and
.1.3.6.1.4.1.11.2.3.7.11.12.2.1.11.1.1.5,HP-SN-IPX-MIB::snIpxPortAddrNetBiosFilterMode,INTEGER,read-write,,mandatory,disabled(0):enabled(1),Enabled/Disabled NetBios Filter Mode status per Port Address entry.
.1.3.6.1.4.1.11.2.3.7.11.12.2.1.12,HP-SN-IPX-MIB::snIpxPortCounters,,,,,,
.1.3.6.1.4.1.11.2.3.7.11.12.2.1.12.1,HP-SN-IPX-MIB::snIpxPortCountersTable,,not-accessible,,mandatory,,IPX port Counters table.
.1.3.6.1.4.1.11.2.3.7.11.12.2.1.12.1.1,HP-SN-IPX-MIB::snIpxPortCountersEntry,,not-accessible,snIpxPortCountersPort,mandatory,,An entry in the IPX Port Counters table.
.1.3.6.1.4.1.11.2.3.7.11.12.2.1.12.1.1.1,HP-SN-IPX-MIB::snIpxPortCountersPort,INTEGER,read-only,,mandatory,,The port index for port Counters entry.
.1.3.6.1.4.1.11.2.3.7.11.12.2.1.12.1.1.2,HP-SN-IPX-MIB::snIpxPortCountersRcvPktsCnt,Counter32,read-only,,mandatory,,IPX incoming packets counter for the interface.
.1.3.6.1.4.1.11.2.3.7.11.12.2.1.12.1.1.3,HP-SN-IPX-MIB::snIpxPortCountersTxPktsCnt,Counter32,read-only,,mandatory,,IPX Outgoing packets counter for the interface.
.1.3.6.1.4.1.11.2.3.7.11.12.2.1.12.1.1.4,HP-SN-IPX-MIB::snIpxPortCountersFwdPktsCnt,Counter32,read-only,,mandatory,,IPX forwarding packets counter for the interface.
.1.3.6.1.4.1.11.2.3.7.11.12.2.1.12.1.1.5,HP-SN-IPX-MIB::snIpxPortCountersRcvDropPktsCnt,Counter32,read-only,,mandatory,,IPX receiving drop packets counter for the interface.
.1.3.6.1.4.1.11.2.3.7.11.12.2.1.12.1.1.6,HP-SN-IPX-MIB::snIpxPortCountersTxDropPktsCnt,Counter32,read-only,,mandatory,,IPX transmitting drop packets counter for the interface.
.1.3.6.1.4.1.11.2.3.7.11.12.2.1.12.1.1.7,HP-SN-IPX-MIB::snIpxPortCountersRcvFiltPktsCnt,Counter32,read-only,,mandatory,,IPX receiving filter packets counter for the interface.
.1.3.6.1.4.1.11.2.3.7.11.12.2.1.12.1.1.8,HP-SN-IPX-MIB::snIpxPortCountersTxFiltPktsCnt,Counter32,read-only,,mandatory,,IPX transmitting filter packets counter for the interface.
.1.3.6.1.4.1.11.2.3.7.11.12.2.2,HP-SN-ROOT-MIB::snIp,,,,,,
.1.3.6.1.4.1.11.2.3.7.11.12.2.2.1,HP-SN-IP-MIB::snRtIpGeneral,,,,,,
.1.3.6.1.4.1.11.2.3.7.11.12.2.2.1.1,HP-SN-IP-MIB::snRtClearArpCache,INTEGER,read-write,,mandatory,normal(0):clear(1),clear(1) will clear arp cache table.
.1.3.6.1.4.1.11.2.3.7.11.12.2.2.1.2,HP-SN-IP-MIB::snRtClearIpCache,INTEGER,read-write,,mandatory,normal(0):clear(1),clear(1) will clear ip route cache table.
.1.3.6.1.4.1.11.2.3.7.11.12.2.2.1.3,HP-SN-IP-MIB::snRtClearIpRoute,INTEGER,read-write,,mandatory,normal(0):clear(1),clear(1) will clear ip route table.
.1.3.6.1.4.1.11.2.3.7.11.12.2.2.1.4,HP-SN-IP-MIB::snRtBootpServer,IpAddress,read-write,,deprecated,,IP address of bootp server to
.1.3.6.1.4.1.11.2.3.7.11.12.2.2.1.5,HP-SN-IP-MIB::snRtBootpRelayMax,INTEGER,read-write,,mandatory,,Maximum number of hop the bootp packet 
.1.3.6.1.4.1.11.2.3.7.11.12.2.2.1.6,HP-SN-IP-MIB::snRtArpAge,INTEGER,read-write,,mandatory,,The time in minutes an ARP entry can
.1.3.6.1.4.1.11.2.3.7.11.12.2.2.1.7,HP-SN-IP-MIB::snRtIpIrdpEnable,INTEGER,read-write,,mandatory,disabled(0):enabled(1),Perform router advertisement on this box.
.1.3.6.1.4.1.11.2.3.7.11.12.2.2.1.8,HP-SN-IP-MIB::snRtIpLoadShare,INTEGER,read-write,,mandatory,disabled(0):enabled(1),If more than one route available,
.1.3.6.1.4.1.11.2.3.7.11.12.2.2.1.9,HP-SN-IP-MIB::snRtIpProxyArp,INTEGER,read-write,,mandatory,disabled(0):enabled(1),Enable/disable proxy arp function 
.1.3.6.1.4.1.11.2.3.7.11.12.2.2.1.10,HP-SN-IP-MIB::snRtIpRarp,INTEGER,read-write,,mandatory,disabled(0):enabled(1),Enable/disable RARP server.
.1.3.6.1.4.1.11.2.3.7.11.12.2.2.1.11,HP-SN-IP-MIB::snRtIpTtl,INTEGER,read-write,,mandatory,,The time to live value to be used
.1.3.6.1.4.1.11.2.3.7.11.12.2.2.1.12,HP-SN-IP-MIB::snRtIpSetAllPortConfig,INTEGER,read-write,,mandatory,,The value of this object is an index number of a
.1.3.6.1.4.1.11.2.3.7.11.12.2.2.1.13,HP-SN-IP-MIB::snRtIpFwdCacheMaxEntries,INTEGER,read-only,,mandatory,,The maximum number of ip forwarding table entries.
.1.3.6.1.4.1.11.2.3.7.11.12.2.2.1.14,HP-SN-IP-MIB::snRtIpFwdCacheCurEntries,INTEGER,read-only,,mandatory,,The current number of ip forwarding table entries.
.1.3.6.1.4.1.11.2.3.7.11.12.2.2.1.15,HP-SN-IP-MIB::snRtIpMaxStaticRouteEntries,INTEGER,read-only,,mandatory,,The maximum number of static route entries in the static route table.
.1.3.6.1.4.1.11.2.3.7.11.12.2.2.1.16,HP-SN-IP-MIB::snRtIpDirBcastFwd,INTEGER,read-write,,mandatory,disabled(0):enabled(1),Enable/Disable directed broadcast forwarding.
.1.3.6.1.4.1.11.2.3.7.11.12.2.2.1.17,HP-SN-IP-MIB::snRtIpLoadShareNumOfPaths,INTEGER,read-write,,mandatory,,Number of routes are used to share load.
.1.3.6.1.4.1.11.2.3.7.11.12.2.2.1.18,HP-SN-IP-MIB::snRtIpLoadShareMaxPaths,INTEGER,read-only,,mandatory,,Maximum number of routes can be configured to share load.
.1.3.6.1.4.1.11.2.3.7.11.12.2.2.1.19,HP-SN-IP-MIB::snRtIpLoadShareMinPaths,INTEGER,read-only,,mandatory,,Minimum number of routes can be configured to share load.
.1.3.6.1.4.1.11.2.3.7.11.12.2.2.1.20,HP-SN-IP-MIB::snRtIpProtocolRouterId,IpAddress,read-write,,mandatory,,Router Id for all IP Protocols.
.1.3.6.1.4.1.11.2.3.7.11.12.2.2.1.21,HP-SN-IP-MIB::snRtIpSourceRoute,INTEGER,read-write,,mandatory,disabled(0):enabled(1),Enable/Disable source routing support, ability to drop the source routing packets.
.1.3.6.1.4.1.11.2.3.7.11.12.2.2.2,HP-SN-IP-MIB::snRtIpStaticRouteTable,,not-accessible,,mandatory,,IP static/default route table.
.1.3.6.1.4.1.11.2.3.7.11.12.2.2.2.1,HP-SN-IP-MIB::snRtIpStaticRouteEntry,,not-accessible,snRtIpStaticRouteIndex,mandatory,,An entry in the IP static route table.
.1.3.6.1.4.1.11.2.3.7.11.12.2.2.2.1.1,HP-SN-IP-MIB::snRtIpStaticRouteIndex,INTEGER,read-only,,mandatory,,The table index for a static route entry.
.1.3.6.1.4.1.11.2.3.7.11.12.2.2.2.1.2,HP-SN-IP-MIB::snRtIpStaticRouteDest,IpAddress,read-write,,mandatory,,Destination IP address.
.1.3.6.1.4.1.11.2.3.7.11.12.2.2.2.1.3,HP-SN-IP-MIB::snRtIpStaticRouteMask,IpAddress,read-write,,mandatory,,Subnet mask associated with 
.1.3.6.1.4.1.11.2.3.7.11.12.2.2.2.1.4,HP-SN-IP-MIB::snRtIpStaticRouteNextHop,IpAddress,read-write,,mandatory,,IP address of next hop router that
.1.3.6.1.4.1.11.2.3.7.11.12.2.2.2.1.5,HP-SN-IP-MIB::snRtIpStaticRouteMetric,INTEGER,read-write,,mandatory,,The metrics to next hop router.
.1.3.6.1.4.1.11.2.3.7.11.12.2.2.2.1.6,HP-SN-IP-MIB::snRtIpStaticRouteRowStatus,INTEGER,read-write,,mandatory,other(1):valid(2):delete(3):create(4),To create or delete a static route
.1.3.6.1.4.1.11.2.3.7.11.12.2.2.2.1.7,HP-SN-IP-MIB::snRtIpStaticRouteDistance,INTEGER,read-write,,mandatory,,Administration distance.
.1.3.6.1.4.1.11.2.3.7.11.12.2.2.3,HP-SN-IP-MIB::snRtIpFilterTable,,not-accessible,,mandatory,,IP filter table.
.1.3.6.1.4.1.11.2.3.7.11.12.2.2.3.1,HP-SN-IP-MIB::snRtIpFilterEntry,,not-accessible,snRtIpFilterIndex,mandatory,,An entry in the IP filter table.
.1.3.6.1.4.1.11.2.3.7.11.12.2.2.3.1.1,HP-SN-IP-MIB::snRtIpFilterIndex,INTEGER,read-only,,mandatory,,The table index for a filter entry.
.1.3.6.1.4.1.11.2.3.7.11.12.2.2.3.1.2,HP-SN-IP-MIB::snRtIpFilterAction,INTEGER,read-write,,mandatory,deny(0):permit(1):qosEnabled(2),Action to take if the ip packet match
.1.3.6.1.4.1.11.2.3.7.11.12.2.2.3.1.3,HP-SN-IP-MIB::snRtIpFilterProtocol,INTEGER,read-write,,mandatory,,Transport protocol. 0 means don't care
.1.3.6.1.4.1.11.2.3.7.11.12.2.2.3.1.4,HP-SN-IP-MIB::snRtIpFilterSourceIp,IpAddress,read-write,,mandatory,,Source IP address.
.1.3.6.1.4.1.11.2.3.7.11.12.2.2.3.1.5,HP-SN-IP-MIB::snRtIpFilterSourceMask,IpAddress,read-write,,mandatory,,Source IP subnet mask.
.1.3.6.1.4.1.11.2.3.7.11.12.2.2.3.1.6,HP-SN-IP-MIB::snRtIpFilterDestIp,IpAddress,read-write,,mandatory,,Destination IP address.
.1.3.6.1.4.1.11.2.3.7.11.12.2.2.3.1.7,HP-SN-IP-MIB::snRtIpFilterDestMask,IpAddress,read-write,,mandatory,,Destination IP subnet mask.
.1.3.6.1.4.1.11.2.3.7.11.12.2.2.3.1.8,HP-SN-IP-MIB::snRtIpFilterOperator,INTEGER,read-write,,mandatory,greater(1):equal(2):less(3):notEqual(4),Type of comparison to perform.
.1.3.6.1.4.1.11.2.3.7.11.12.2.2.3.1.9,HP-SN-IP-MIB::snRtIpFilterOperand,INTEGER,read-write,,mandatory,,For now this only refers to transport 
.1.3.6.1.4.1.11.2.3.7.11.12.2.2.3.1.10,HP-SN-IP-MIB::snRtIpFilterRowStatus,INTEGER,read-write,,mandatory,other(1):valid(2):delete(3):create(4),To create or delete a filter
.1.3.6.1.4.1.11.2.3.7.11.12.2.2.3.1.11,HP-SN-IP-MIB::snRtIpFilterEstablished,INTEGER,read-write,,mandatory,disabled(0):enabled(1),Enable/Disable the filtering of established TCP
.1.3.6.1.4.1.11.2.3.7.11.12.2.2.3.1.12,HP-SN-IP-MIB::snRtIpFilterQosPriority,INTEGER,read-write,,mandatory,level0(0):level1(1):level2(2):level3(3):level4(4):level5(5):level6(6):level7(7),The router L4 Qos Priority values are:
.1.3.6.1.4.1.11.2.3.7.11.12.2.2.4,HP-SN-IP-MIB::snRtIpRarpTable,,not-accessible,,mandatory,,IP RARP table.
.1.3.6.1.4.1.11.2.3.7.11.12.2.2.4.1,HP-SN-IP-MIB::snRtIpRarpEntry,,not-accessible,snRtIpRarpIndex,mandatory,,An entry in the IP Rarp table.
.1.3.6.1.4.1.11.2.3.7.11.12.2.2.4.1.1,HP-SN-IP-MIB::snRtIpRarpIndex,INTEGER,read-only,,mandatory,,The table index for a Rarp entry.
.1.3.6.1.4.1.11.2.3.7.11.12.2.2.4.1.2,HP-SN-IP-MIB::snRtIpRarpMac,OCTET,read-write,,mandatory,,The Mac address for a Rarp entry.
.1.3.6.1.4.1.11.2.3.7.11.12.2.2.4.1.3,HP-SN-IP-MIB::snRtIpRarpIp,IpAddress,read-write,,mandatory,,The IP address for a Rarp entry.
.1.3.6.1.4.1.11.2.3.7.11.12.2.2.4.1.4,HP-SN-IP-MIB::snRtIpRarpRowStatus,INTEGER,read-write,,mandatory,other(1):valid(2):delete(3):create(4),To create or delete a Rarp
.1.3.6.1.4.1.11.2.3.7.11.12.2.2.5,HP-SN-IP-MIB::snRtStaticArpTable,,not-accessible,,mandatory,,IP static arp table.
.1.3.6.1.4.1.11.2.3.7.11.12.2.2.5.1,HP-SN-IP-MIB::snRtStaticArpEntry,,not-accessible,snRtStaticArpIndex,mandatory,,An entry in the IP static arp table.
.1.3.6.1.4.1.11.2.3.7.11.12.2.2.5.1.1,HP-SN-IP-MIB::snRtStaticArpIndex,INTEGER,read-only,,mandatory,,The table index for a static arp entry.
.1.3.6.1.4.1.11.2.3.7.11.12.2.2.5.1.2,HP-SN-IP-MIB::snRtStaticArpIp,IpAddress,read-write,,mandatory,,The IP address for a static arp entry.
.1.3.6.1.4.1.11.2.3.7.11.12.2.2.5.1.3,HP-SN-IP-MIB::snRtStaticArpMac,OCTET,read-write,,mandatory,,The Mac address for a static arp entry.
.1.3.6.1.4.1.11.2.3.7.11.12.2.2.5.1.4,HP-SN-IP-MIB::snRtStaticArpPort,INTEGER,read-write,,mandatory,,The port index for a static arp entry.
.1.3.6.1.4.1.11.2.3.7.11.12.2.2.5.1.5,HP-SN-IP-MIB::snRtStaticArpRowStatus,INTEGER,read-write,,mandatory,other(1):valid(2):delete(3):create(4),To create or delete a Static Arp
.1.3.6.1.4.1.11.2.3.7.11.12.2.2.6,HP-SN-IP-MIB::snRtIpPortAddrTable,,not-accessible,,deprecated,,IP port address table.
.1.3.6.1.4.1.11.2.3.7.11.12.2.2.6.1,HP-SN-IP-MIB::snRtIpPortAddrEntry,,not-accessible,snRtIpPortAddrPortIndex:snRtIpPortAddress,deprecated,,An entry in the IP Port Address table.
.1.3.6.1.4.1.11.2.3.7.11.12.2.2.6.1.1,HP-SN-IP-MIB::snRtIpPortAddrPortIndex,INTEGER,read-only,,deprecated,,The port index for port address entry.
.1.3.6.1.4.1.11.2.3.7.11.12.2.2.6.1.2,HP-SN-IP-MIB::snRtIpPortAddress,IpAddress,read-only,,deprecated,,The port IP address.
.1.3.6.1.4.1.11.2.3.7.11.12.2.2.6.1.3,HP-SN-IP-MIB::snRtIpPortSubnetMask,IpAddress,read-write,,deprecated,,The port IP address subnet mask.
.1.3.6.1.4.1.11.2.3.7.11.12.2.2.6.1.4,HP-SN-IP-MIB::snRtIpPortAddrType,INTEGER,read-write,,deprecated,primary(1):secondary(2),The port IP address type.
.1.3.6.1.4.1.11.2.3.7.11.12.2.2.6.1.5,HP-SN-IP-MIB::snRtIpPortRowStatus,INTEGER,read-write,,deprecated,other(1):valid(2):delete(3):create(4),To create or delete a port address
.1.3.6.1.4.1.11.2.3.7.11.12.2.2.7,HP-SN-IP-MIB::snRtIpPortAccessTable,,not-accessible,,deprecated,,IP port access table.
.1.3.6.1.4.1.11.2.3.7.11.12.2.2.7.1,HP-SN-IP-MIB::snRtIpPortAccessEntry,,not-accessible,snRtIpPortAccessPortIndex:snRtIpPortAccessDirection,deprecated,,An entry in the IP Port access table.
.1.3.6.1.4.1.11.2.3.7.11.12.2.2.7.1.1,HP-SN-IP-MIB::snRtIpPortAccessPortIndex,INTEGER,read-only,,deprecated,,The port index for port access entry.
.1.3.6.1.4.1.11.2.3.7.11.12.2.2.7.1.2,HP-SN-IP-MIB::snRtIpPortAccessDirection,INTEGER,read-only,,deprecated,in(1):out(2),The incoming or outgoing check
.1.3.6.1.4.1.11.2.3.7.11.12.2.2.7.1.3,HP-SN-IP-MIB::snRtIpPortAccessFilters,OCTET,read-write,,deprecated,,1st octet correspond to 1st filter 
.1.3.6.1.4.1.11.2.3.7.11.12.2.2.7.1.4,HP-SN-IP-MIB::snRtIpPortAccessRowStatus,INTEGER,read-write,,deprecated,other(1):valid(2):delete(3):create(4),To create or delete a port access
.1.3.6.1.4.1.11.2.3.7.11.12.2.2.8,HP-SN-IP-MIB::snRtIpPortConfigTable,,not-accessible,,deprecated,,IP port Config table.
.1.3.6.1.4.1.11.2.3.7.11.12.2.2.8.1,HP-SN-IP-MIB::snRtIpPortConfigEntry,,not-accessible,snRtIpPortConfigPortIndex,deprecated,,An entry in the IP Port Config table.
.1.3.6.1.4.1.11.2.3.7.11.12.2.2.8.1.1,HP-SN-IP-MIB::snRtIpPortConfigPortIndex,INTEGER,read-only,,deprecated,,The port index for port config entry.
.1.3.6.1.4.1.11.2.3.7.11.12.2.2.8.1.2,HP-SN-IP-MIB::snRtIpPortMtu,INTEGER,read-write,,deprecated,,The maximun transfer unit.
.1.3.6.1.4.1.11.2.3.7.11.12.2.2.8.1.3,HP-SN-IP-MIB::snRtIpPortEncap,INTEGER,read-write,,deprecated,ethernet(1):snap(2):hdlc(3):ppp(4),Data link encapsulation to be used
.1.3.6.1.4.1.11.2.3.7.11.12.2.2.8.1.4,HP-SN-IP-MIB::snRtIpPortMetric,INTEGER,read-write,,deprecated,,The metric.
.1.3.6.1.4.1.11.2.3.7.11.12.2.2.8.1.5,HP-SN-IP-MIB::snRtIpPortDirBcastFwd,INTEGER,read-write,,deprecated,disabled(0):enabled(1),Enable/Disable directed broadcast forwarding on the port.
.1.3.6.1.4.1.11.2.3.7.11.12.2.2.9,HP-SN-IP-MIB::snRtBcastFwd,,,,,,
.1.3.6.1.4.1.11.2.3.7.11.12.2.2.9.1,HP-SN-IP-MIB::snRtBcastFwdGeneral,,,,,,
.1.3.6.1.4.1.11.2.3.7.11.12.2.2.9.1.1,HP-SN-IP-MIB::snRtUdpBcastFwdEnable,INTEGER,read-write,,mandatory,disabled(0):enabled(1),Enable or disable UDP broadcast forwarding service.
.1.3.6.1.4.1.11.2.3.7.11.12.2.2.9.2,HP-SN-IP-MIB::snRtUdpBcastFwdPort,,,,,,
.1.3.6.1.4.1.11.2.3.7.11.12.2.2.9.2.1,HP-SN-IP-MIB::snRtUdpBcastFwdPortTable,,not-accessible,,mandatory,,This table contains a list of UDP port numbers
.1.3.6.1.4.1.11.2.3.7.11.12.2.2.9.2.1.1,HP-SN-IP-MIB::snRtUdpBcastFwdPortEntry,,not-accessible,snRtUdpBcastFwdPortIndex,mandatory,,An entry of the UDP broadcast forwarding
.1.3.6.1.4.1.11.2.3.7.11.12.2.2.9.2.1.1.1,HP-SN-IP-MIB::snRtUdpBcastFwdPortIndex,INTEGER,read-only,,mandatory,,The table index for a UDP broadcast forwarding
.1.3.6.1.4.1.11.2.3.7.11.12.2.2.9.2.1.1.2,HP-SN-IP-MIB::snRtUdpBcastFwdPortNumber,INTEGER,read-write,,mandatory,,UDP port number for which UDP broadcast forwarding
.1.3.6.1.4.1.11.2.3.7.11.12.2.2.9.2.1.1.3,HP-SN-IP-MIB::snRtUdpBcastFwdPortRowStatus,INTEGER,read-write,,mandatory,other(1):valid(2):delete(3):create(4),To create or delete a UDP broadcast forwarding
.1.3.6.1.4.1.11.2.3.7.11.12.2.2.9.3,HP-SN-IP-MIB::snRtUdpHelper,,,,,,
.1.3.6.1.4.1.11.2.3.7.11.12.2.2.9.3.1,HP-SN-IP-MIB::snRtUdpHelperTable,,not-accessible,,mandatory,,UDP helper table.
.1.3.6.1.4.1.11.2.3.7.11.12.2.2.9.3.1.1,HP-SN-IP-MIB::snRtUdpHelperEntry,,not-accessible,snRtUdpHelperPortIndex:snRtUdpHelperIndex,mandatory,,An entry of the UDP helper table.
.1.3.6.1.4.1.11.2.3.7.11.12.2.2.9.3.1.1.1,HP-SN-IP-MIB::snRtUdpHelperPortIndex,INTEGER,read-only,,mandatory,,The port index for a UDP helper entry.
.1.3.6.1.4.1.11.2.3.7.11.12.2.2.9.3.1.1.2,HP-SN-IP-MIB::snRtUdpHelperIndex,INTEGER,read-only,,mandatory,,The table index for a UDP helper entry.
.1.3.6.1.4.1.11.2.3.7.11.12.2.2.9.3.1.1.3,HP-SN-IP-MIB::snRtUdpHelperAddr,IpAddress,read-write,,mandatory,,The UDP helper address. This is the address that
.1.3.6.1.4.1.11.2.3.7.11.12.2.2.9.3.1.1.4,HP-SN-IP-MIB::snRtUdpHelperRowStatus,INTEGER,read-write,,mandatory,other(1):valid(2):delete(3):create(4),To create or delete a UDP helper entry.
.1.3.6.1.4.1.11.2.3.7.11.12.2.2.10,HP-SN-IP-MIB::snRtIpTraceRoute,,,,,,
.1.3.6.1.4.1.11.2.3.7.11.12.2.2.10.1,HP-SN-IP-MIB::snRtIpTraceRouteGeneral,,,,,,
.1.3.6.1.4.1.11.2.3.7.11.12.2.2.10.1.1,HP-SN-IP-MIB::snRtIpTraceRouteTargetAddr,IpAddress,read-write,,mandatory,,Target IP address of which trace route is performed.
.1.3.6.1.4.1.11.2.3.7.11.12.2.2.10.1.2,HP-SN-IP-MIB::snRtIpTraceRouteMinTtl,INTEGER,read-write,,mandatory,,Minimum TTL value carried in the first probe packet.
.1.3.6.1.4.1.11.2.3.7.11.12.2.2.10.1.3,HP-SN-IP-MIB::snRtIpTraceRouteMaxTtl,INTEGER,read-write,,mandatory,,Maximum TTL value carried in the last probe packet.
.1.3.6.1.4.1.11.2.3.7.11.12.2.2.10.1.4,HP-SN-IP-MIB::snRtIpTraceRouteTimeOut,INTEGER,read-write,,mandatory,,Time out period (in seconds) to wait for the response
.1.3.6.1.4.1.11.2.3.7.11.12.2.2.10.1.5,HP-SN-IP-MIB::snRtIpTraceRouteControl,INTEGER,read-write,,mandatory,start(1):abort(2):success(3):failure(4):inProgress(5),Only 'start' and 'abort' are writable values; 'success',
.1.3.6.1.4.1.11.2.3.7.11.12.2.2.10.2,HP-SN-IP-MIB::snRtIpTraceRouteResult,,,,,,
.1.3.6.1.4.1.11.2.3.7.11.12.2.2.10.2.1,HP-SN-IP-MIB::snRtIpTraceRouteResultTable,,not-accessible,,mandatory,,Trace route result table.
.1.3.6.1.4.1.11.2.3.7.11.12.2.2.10.2.1.1,HP-SN-IP-MIB::snRtIpTraceRouteResultEntry,,not-accessible,snRtIpTraceRouteResultIndex,mandatory,,An entry of the trace route result table.
.1.3.6.1.4.1.11.2.3.7.11.12.2.2.10.2.1.1.1,HP-SN-IP-MIB::snRtIpTraceRouteResultIndex,INTEGER,read-only,,mandatory,,The table index for a trace route result entry.
.1.3.6.1.4.1.11.2.3.7.11.12.2.2.10.2.1.1.2,HP-SN-IP-MIB::snRtIpTraceRouteResultAddr,IpAddress,read-only,,mandatory,,The router or the target address of which forms
.1.3.6.1.4.1.11.2.3.7.11.12.2.2.10.2.1.1.3,HP-SN-IP-MIB::snRtIpTraceRouteResultRoundTripTime1,TimeTicks,read-only,,mandatory,,The round trip time between the first probe packet
.1.3.6.1.4.1.11.2.3.7.11.12.2.2.10.2.1.1.4,HP-SN-IP-MIB::snRtIpTraceRouteResultRoundTripTime2,TimeTicks,read-only,,mandatory,,The round trip time between the second probe packet
.1.3.6.1.4.1.11.2.3.7.11.12.2.2.11,HP-SN-IP-MIB::snRtIpFwdCacheTable,,not-accessible,,mandatory,,IP forwarding cache table.
.1.3.6.1.4.1.11.2.3.7.11.12.2.2.11.1,HP-SN-IP-MIB::snRtIpFwdCacheEntry,,not-accessible,snRtIpFwdCacheIndex,mandatory,,An entry in the IP forwarding cache table.
.1.3.6.1.4.1.11.2.3.7.11.12.2.2.11.1.1,HP-SN-IP-MIB::snRtIpFwdCacheIndex,INTEGER,read-only,,mandatory,,The table index for a ip forwarding cache table entry.
.1.3.6.1.4.1.11.2.3.7.11.12.2.2.11.1.2,HP-SN-IP-MIB::snRtIpFwdCacheIp,IpAddress,read-only,,mandatory,,The IP address of a station.
.1.3.6.1.4.1.11.2.3.7.11.12.2.2.11.1.3,HP-SN-IP-MIB::snRtIpFwdCacheMac,OCTET,read-only,,mandatory,,The Mac address of an IP station.
.1.3.6.1.4.1.11.2.3.7.11.12.2.2.11.1.4,HP-SN-IP-MIB::snRtIpFwdCacheNextHopIp,IpAddress,read-only,,mandatory,,The next hop router IP address.
.1.3.6.1.4.1.11.2.3.7.11.12.2.2.11.1.5,HP-SN-IP-MIB::snRtIpFwdCacheOutgoingPort,INTEGER,read-only,,mandatory,,The outgoing port of which packets will forward to.
.1.3.6.1.4.1.11.2.3.7.11.12.2.2.11.1.6,HP-SN-IP-MIB::snRtIpFwdCacheType,INTEGER,read-only,,mandatory,dynamic(1):permanent(2),The 'dynamic' or 'permanent' type for a ip forwarding
.1.3.6.1.4.1.11.2.3.7.11.12.2.2.11.1.7,HP-SN-IP-MIB::snRtIpFwdCacheAction,INTEGER,read-only,,mandatory,other(1):forward(2):forUs(3):waitForArp(4):complexFilter(5):icmpDeny(6):dropPacket(7),The action to take.
.1.3.6.1.4.1.11.2.3.7.11.12.2.2.11.1.8,HP-SN-IP-MIB::snRtIpFwdCacheFragCheck,INTEGER,read-only,,mandatory,disabled(0):enabled(1),Check for fragmentation.
.1.3.6.1.4.1.11.2.3.7.11.12.2.2.11.1.9,HP-SN-IP-MIB::snRtIpFwdCacheSnapHdr,INTEGER,read-only,,mandatory,disabled(0):enabled(1),Apply SNAP encapsulation.
.1.3.6.1.4.1.11.2.3.7.11.12.2.2.11.1.10,HP-SN-IP-MIB::snRtIpFwdCacheVLanId,INTEGER,read-only,,mandatory,,The VLAN ID for a ip forwarding cache table entry.
.1.3.6.1.4.1.11.2.3.7.11.12.2.2.12,HP-SN-IP-MIB::snIpAsPathAccessListTable,,not-accessible,,mandatory,,Ip As-Path Access List table.
.1.3.6.1.4.1.11.2.3.7.11.12.2.2.12.1,HP-SN-IP-MIB::snIpAsPathAccessListEntry,,not-accessible,snIpAsPathAccessListIndex:snIpAsPathAccessListSequence,mandatory,,An entry in the Ip As-Path Access List table.
.1.3.6.1.4.1.11.2.3.7.11.12.2.2.12.1.1,HP-SN-IP-MIB::snIpAsPathAccessListIndex,INTEGER,read-only,,mandatory,,The table index for a filter entry.
.1.3.6.1.4.1.11.2.3.7.11.12.2.2.12.1.2,HP-SN-IP-MIB::snIpAsPathAccessListSequence,INTEGER,read-only,,mandatory,,The table sequence index for a filter entry.
.1.3.6.1.4.1.11.2.3.7.11.12.2.2.12.1.3,HP-SN-IP-MIB::snIpAsPathAccessListAction,INTEGER,read-write,,mandatory,deny(0):permit(1),Action to take if the bgp address match
.1.3.6.1.4.1.11.2.3.7.11.12.2.2.12.1.4,HP-SN-IP-MIB::snIpAsPathAccessListRegExpression,OCTET,read-write,,mandatory,,Autonomous system in the filter using a regular expression.
.1.3.6.1.4.1.11.2.3.7.11.12.2.2.12.1.5,HP-SN-IP-MIB::snIpAsPathAccessListRowStatus,INTEGER,read-write,,mandatory,invalid(1):valid(2):delete(3):create(4):modify(5),This object is used to create and
.1.3.6.1.4.1.11.2.3.7.11.12.2.2.13,HP-SN-IP-MIB::snIpCommunityListTable,,not-accessible,,mandatory,,Ip Community List table.
.1.3.6.1.4.1.11.2.3.7.11.12.2.2.13.1,HP-SN-IP-MIB::snIpCommunityListEntry,,not-accessible,snIpCommunityListIndex:snIpCommunityListSequence,mandatory,,An entry in the Ip Community List table.
.1.3.6.1.4.1.11.2.3.7.11.12.2.2.13.1.1,HP-SN-IP-MIB::snIpCommunityListIndex,INTEGER,read-only,,mandatory,,The table index for a filter entry.
.1.3.6.1.4.1.11.2.3.7.11.12.2.2.13.1.2,HP-SN-IP-MIB::snIpCommunityListSequence,INTEGER,read-only,,mandatory,,The table sequence index for a filter entry.
.1.3.6.1.4.1.11.2.3.7.11.12.2.2.13.1.3,HP-SN-IP-MIB::snIpCommunityListAction,INTEGER,read-write,,mandatory,deny(0):permit(1),Action to take if the bgp address match
.1.3.6.1.4.1.11.2.3.7.11.12.2.2.13.1.4,HP-SN-IP-MIB::snIpCommunityListCommNum,OCTET,read-write,,mandatory,,A number from 1 to 0xFFFFFFFF. There are 20 of them. 
.1.3.6.1.4.1.11.2.3.7.11.12.2.2.13.1.5,HP-SN-IP-MIB::snIpCommunityListInternet,INTEGER,read-write,,mandatory,disabled(0):enabled(1),Disabled/Enabled the Internet Community.
.1.3.6.1.4.1.11.2.3.7.11.12.2.2.13.1.6,HP-SN-IP-MIB::snIpCommunityListNoAdvertise,INTEGER,read-write,,mandatory,false(0):true(1),Do not advertise this route to any peer (internal or external).
.1.3.6.1.4.1.11.2.3.7.11.12.2.2.13.1.7,HP-SN-IP-MIB::snIpCommunityListNoExport,INTEGER,read-write,,mandatory,false(0):true(1),Do not advertise this route to an EBGP peer.
.1.3.6.1.4.1.11.2.3.7.11.12.2.2.13.1.8,HP-SN-IP-MIB::snIpCommunityListRowStatus,INTEGER,read-write,,mandatory,invalid(1):valid(2):delete(3):create(4):modify(5),This object is used to create and
.1.3.6.1.4.1.11.2.3.7.11.12.2.2.13.1.9,HP-SN-IP-MIB::snIpCommunityListLocalAs,INTEGER,read-write,,mandatory,false(0):true(1),Send this route to peers in other sub-autonomous systems within
.1.3.6.1.4.1.11.2.3.7.11.12.2.2.14,HP-SN-IP-MIB::snIpPrefixListTable,,not-accessible,,mandatory,,Ip Prefix List table.
.1.3.6.1.4.1.11.2.3.7.11.12.2.2.14.1,HP-SN-IP-MIB::snIpPrefixListEntry,,not-accessible,snIpPrefixListName:snIpPrefixListSequence,mandatory,,An entry in the Ip As-Path Access List table.
.1.3.6.1.4.1.11.2.3.7.11.12.2.2.14.1.1,HP-SN-IP-MIB::snIpPrefixListName,OCTET,read-only,,mandatory,,An octet string of the ip prefix list name, each character of the name is represented by one octet.
.1.3.6.1.4.1.11.2.3.7.11.12.2.2.14.1.2,HP-SN-IP-MIB::snIpPrefixListSequence,INTEGER,read-only,,mandatory,,The table sequence index for a filter entry.
.1.3.6.1.4.1.11.2.3.7.11.12.2.2.14.1.3,HP-SN-IP-MIB::snIpPrefixListDesc,OCTET,read-write,,mandatory,,An octet string of the ip prefix list description, each character of the name is represented by one octet.
.1.3.6.1.4.1.11.2.3.7.11.12.2.2.14.1.4,HP-SN-IP-MIB::snIpPrefixListAction,INTEGER,read-write,,mandatory,deny(0):permit(1),Action to take if the ip prefix match
.1.3.6.1.4.1.11.2.3.7.11.12.2.2.14.1.5,HP-SN-IP-MIB::snIpPrefixListAddr,IpAddress,read-write,,mandatory,,Prefix IP address.
.1.3.6.1.4.1.11.2.3.7.11.12.2.2.14.1.6,HP-SN-IP-MIB::snIpPrefixListMask,IpAddress,read-write,,mandatory,,Prefix IP mask.
.1.3.6.1.4.1.11.2.3.7.11.12.2.2.14.1.7,HP-SN-IP-MIB::snIpPrefixListGeValue,INTEGER,read-write,,mandatory,,Greater than value.
.1.3.6.1.4.1.11.2.3.7.11.12.2.2.14.1.8,HP-SN-IP-MIB::snIpPrefixListLeValue,INTEGER,read-write,,mandatory,,Less than value.
.1.3.6.1.4.1.11.2.3.7.11.12.2.2.14.1.9,HP-SN-IP-MIB::snIpPrefixListRowStatus,INTEGER,read-write,,mandatory,invalid(1):valid(2):delete(3):create(4):modify(5),This object is used to create and
.1.3.6.1.4.1.11.2.3.7.11.12.2.2.15,HP-SN-IP-ACL-MIB::snAgAcl,,,,,,
.1.3.6.1.4.1.11.2.3.7.11.12.2.2.15.1,HP-SN-IP-ACL-MIB::snAgAclGlobal,,,,,,
.1.3.6.1.4.1.11.2.3.7.11.12.2.2.15.1.1,HP-SN-IP-ACL-MIB::snAgAclGblCurRowIndex,INTEGER,read-only,,mandatory,,The current row index of the ACL table entry.
.1.3.6.1.4.1.11.2.3.7.11.12.2.2.15.2,HP-SN-IP-ACL-MIB::snAgAclTable,,not-accessible,,mandatory,,Table of Access Control List
.1.3.6.1.4.1.11.2.3.7.11.12.2.2.15.2.1,HP-SN-IP-ACL-MIB::snAgAclEntry,,not-accessible,snAgAclIndex,mandatory,,An entry in the IP access control list table.
.1.3.6.1.4.1.11.2.3.7.11.12.2.2.15.2.1.1,HP-SN-IP-ACL-MIB::snAgAclIndex,INTEGER,read-only,,mandatory,,The access control list item number for an entry.
.1.3.6.1.4.1.11.2.3.7.11.12.2.2.15.2.1.2,HP-SN-IP-ACL-MIB::snAgAclNumber,INTEGER,read-write,,mandatory,,The access control list number for an entry.
.1.3.6.1.4.1.11.2.3.7.11.12.2.2.15.2.1.3,HP-SN-IP-ACL-MIB::snAgAclName,OCTET,read-write,,mandatory,,ACL name for an entry.
.1.3.6.1.4.1.11.2.3.7.11.12.2.2.15.2.1.4,HP-SN-IP-ACL-MIB::snAgAclAction,INTEGER,read-write,,mandatory,deny(0):permit(1),Action to take if the ip packet matches
.1.3.6.1.4.1.11.2.3.7.11.12.2.2.15.2.1.5,HP-SN-IP-ACL-MIB::snAgAclProtocol,INTEGER,read-write,,mandatory,,Transport protocol. 0 means any protocol.
.1.3.6.1.4.1.11.2.3.7.11.12.2.2.15.2.1.6,HP-SN-IP-ACL-MIB::snAgAclSourceIp,IpAddress,read-write,,mandatory,,Source IP address.
.1.3.6.1.4.1.11.2.3.7.11.12.2.2.15.2.1.7,HP-SN-IP-ACL-MIB::snAgAclSourceMask,IpAddress,read-write,,mandatory,,Source IP subnet mask.
.1.3.6.1.4.1.11.2.3.7.11.12.2.2.15.2.1.8,HP-SN-IP-ACL-MIB::snAgAclSourceOperator,INTEGER,read-write,,mandatory,eq(0):neq(1):lt(2):gt(3):range(4):undefined(7),Type of comparison to perform.
.1.3.6.1.4.1.11.2.3.7.11.12.2.2.15.2.1.9,HP-SN-IP-ACL-MIB::snAgAclSourceOperand1,INTEGER,read-write,,mandatory,,For now this only refers to transport 
.1.3.6.1.4.1.11.2.3.7.11.12.2.2.15.2.1.10,HP-SN-IP-ACL-MIB::snAgAclSourceOperand2,INTEGER,read-write,,mandatory,,For now this only refers to transport 
.1.3.6.1.4.1.11.2.3.7.11.12.2.2.15.2.1.11,HP-SN-IP-ACL-MIB::snAgAclDestinationIp,IpAddress,read-write,,mandatory,,Destination IP address.
.1.3.6.1.4.1.11.2.3.7.11.12.2.2.15.2.1.12,HP-SN-IP-ACL-MIB::snAgAclDestinationMask,IpAddress,read-write,,mandatory,,Destination IP subnet mask.
.1.3.6.1.4.1.11.2.3.7.11.12.2.2.15.2.1.13,HP-SN-IP-ACL-MIB::snAgAclDestinationOperator,INTEGER,read-write,,mandatory,eq(0):neq(1):lt(2):gt(3):range(4):undefined(7),Type of comparison to perform.
.1.3.6.1.4.1.11.2.3.7.11.12.2.2.15.2.1.14,HP-SN-IP-ACL-MIB::snAgAclDestinationOperand1,INTEGER,read-write,,mandatory,,For now this only refers to transport 
.1.3.6.1.4.1.11.2.3.7.11.12.2.2.15.2.1.15,HP-SN-IP-ACL-MIB::snAgAclDestinationOperand2,INTEGER,read-write,,mandatory,,For now this only refers to transport 
.1.3.6.1.4.1.11.2.3.7.11.12.2.2.15.2.1.16,HP-SN-IP-ACL-MIB::snAgAclPrecedence,INTEGER,read-write,,mandatory,critical(5):flash(3):flashoverride(4):immediate(2):internet(6):network(7):priority(1):routine(0):undefined(8),This refers to IP precedence value in the range <0-7>
.1.3.6.1.4.1.11.2.3.7.11.12.2.2.15.2.1.17,HP-SN-IP-ACL-MIB::snAgAclTos,INTEGER,read-write,,mandatory,normal(0):minMonetaryCost(1):maxReliability(2):tosValue3(3):maxThroughput(4):tosValue5(5):tosValue6(6):tosValue7(7):minDelay(8):tosValue9(9):tosValue10(10):tosValue11(11):tosValue12(12):tosValue13(13):tosValue14(14):tosValue15(15):undefined(16),This refers to the IP type of service value in range
.1.3.6.1.4.1.11.2.3.7.11.12.2.2.15.2.1.18,HP-SN-IP-ACL-MIB::snAgAclEstablished,INTEGER,read-write,,mandatory,disabled(0):enabled(1),Enable/Disable the filtering of established TCP
.1.3.6.1.4.1.11.2.3.7.11.12.2.2.15.2.1.19,HP-SN-IP-ACL-MIB::snAgAclLogOption,INTEGER,read-write,,mandatory,false(0):true(1),Log flag
.1.3.6.1.4.1.11.2.3.7.11.12.2.2.15.2.1.20,HP-SN-IP-ACL-MIB::snAgAclStandardFlag,INTEGER,read-write,,mandatory,false(0):true(1),Return whether the ACL is standard or extended, 1 for standard ACL
.1.3.6.1.4.1.11.2.3.7.11.12.2.2.15.2.1.21,HP-SN-IP-ACL-MIB::snAgAclRowStatus,INTEGER,read-write,,mandatory,other(1):valid(2):delete(3):create(4),To create or delete a access list
.1.3.6.1.4.1.11.2.3.7.11.12.2.2.15.2.1.22,HP-SN-IP-ACL-MIB::snAgAclFlowCounter,Counter64,read-only,,mandatory,,Approximate count of flows matching individual ACL entry.
.1.3.6.1.4.1.11.2.3.7.11.12.2.2.15.2.1.23,HP-SN-IP-ACL-MIB::snAgAclPacketCounter,Counter64,read-only,,mandatory,,Accurate count of packets matching individual ACL entry.
.1.3.6.1.4.1.11.2.3.7.11.12.2.2.15.2.1.24,HP-SN-IP-ACL-MIB::snAgAclComments,OCTET,read-write,,mandatory,,Remark description of individual ACL entry.
.1.3.6.1.4.1.11.2.3.7.11.12.2.2.15.2.1.25,HP-SN-IP-ACL-MIB::snAgAclIpPriority,INTEGER,read-write,,mandatory,,QoS priority option for IP ACL entry.
.1.3.6.1.4.1.11.2.3.7.11.12.2.2.15.2.1.26,HP-SN-IP-ACL-MIB::snAgAclPriorityForce,INTEGER,read-write,,mandatory,,Force packet outgoing priority. Not defined(4)
.1.3.6.1.4.1.11.2.3.7.11.12.2.2.15.2.1.27,HP-SN-IP-ACL-MIB::snAgAclPriorityMapping,INTEGER,read-write,,mandatory,,Map incoming packet priority. Not defined(8)
.1.3.6.1.4.1.11.2.3.7.11.12.2.2.15.2.1.28,HP-SN-IP-ACL-MIB::snAgAclDscpMarking,INTEGER,read-write,,mandatory,,Mark packets with given DSCP value. Not defined(64)
.1.3.6.1.4.1.11.2.3.7.11.12.2.2.15.2.1.29,HP-SN-IP-ACL-MIB::snAgAclDscpMapping,INTEGER,read-write,,mandatory,,Map incoming DSCP value. Not defined(64)
.1.3.6.1.4.1.11.2.3.7.11.12.2.2.15.3,HP-SN-IP-ACL-MIB::snAgAclBindToPortTable,,not-accessible,,mandatory,,Table of ACL binding to port for router
.1.3.6.1.4.1.11.2.3.7.11.12.2.2.15.3.1,HP-SN-IP-ACL-MIB::snAgAclBindToPortEntry,,not-accessible,snAgAclPortNum:snAgAclPortBindDirection,mandatory,,An entry in the ACL-binding-to-port table.
.1.3.6.1.4.1.11.2.3.7.11.12.2.2.15.3.1.1,HP-SN-IP-ACL-MIB::snAgAclPortNum,INTEGER,read-only,,mandatory,,Binding-to port num, either physical port or virtual interface.
.1.3.6.1.4.1.11.2.3.7.11.12.2.2.15.3.1.2,HP-SN-IP-ACL-MIB::snAgAclPortBindDirection,INTEGER,read-only,,mandatory,inbound(0):outbound(1),ACL port direction, inbound or outbound
.1.3.6.1.4.1.11.2.3.7.11.12.2.2.15.3.1.3,HP-SN-IP-ACL-MIB::snAgAclNum,INTEGER,read-write,,mandatory,,Defined ACL number
.1.3.6.1.4.1.11.2.3.7.11.12.2.2.15.3.1.4,HP-SN-IP-ACL-MIB::snAgAclNameString,OCTET,read-write,,mandatory,,Defined ACL name
.1.3.6.1.4.1.11.2.3.7.11.12.2.2.15.3.1.5,HP-SN-IP-ACL-MIB::snAgBindPortListInVirtualInterface,OCTET,read-write,,mandatory,,Port list for binding virtual interface
.1.3.6.1.4.1.11.2.3.7.11.12.2.2.15.3.1.6,HP-SN-IP-ACL-MIB::snAgAclPortRowStatus,INTEGER,read-write,,mandatory,other(1):valid(2):delete(3):create(4),To create or delete a ACL port entry.
.1.3.6.1.4.1.11.2.3.7.11.12.2.2.16,HP-SN-IP-MIB::snIpAsPathAccessListStringTable,,not-accessible,,mandatory,,Ip As-Path Access List table, string version.
.1.3.6.1.4.1.11.2.3.7.11.12.2.2.16.1,HP-SN-IP-MIB::snIpAsPathAccessListStringEntry,,not-accessible,snIpAsPathAccessListStringName:snIpAsPathAccessListStringSequence,mandatory,,An entry in the Ip As-Path Access List table.
.1.3.6.1.4.1.11.2.3.7.11.12.2.2.16.1.1,HP-SN-IP-MIB::snIpAsPathAccessListStringName,OCTET,read-only,,mandatory,,The table index for a filter entry, string version.
.1.3.6.1.4.1.11.2.3.7.11.12.2.2.16.1.2,HP-SN-IP-MIB::snIpAsPathAccessListStringSequence,INTEGER,read-only,,mandatory,,The table sequence index for a filter entry.
.1.3.6.1.4.1.11.2.3.7.11.12.2.2.16.1.3,HP-SN-IP-MIB::snIpAsPathAccessListStringAction,INTEGER,read-write,,mandatory,deny(0):permit(1),Action to take if the bgp address match
.1.3.6.1.4.1.11.2.3.7.11.12.2.2.16.1.4,HP-SN-IP-MIB::snIpAsPathAccessListStringRegExpression,OCTET,read-write,,mandatory,,Autonomous system in the filter using a regular expression.
.1.3.6.1.4.1.11.2.3.7.11.12.2.2.16.1.5,HP-SN-IP-MIB::snIpAsPathAccessListStringRowStatus,INTEGER,read-write,,mandatory,invalid(1):valid(2):delete(3):create(4):modify(5),This object is used to create and
.1.3.6.1.4.1.11.2.3.7.11.12.2.2.17,HP-SN-IP-MIB::snIpCommunityListStringTable,,not-accessible,,mandatory,,Ip Community ListString table, string version.
.1.3.6.1.4.1.11.2.3.7.11.12.2.2.17.1,HP-SN-IP-MIB::snIpCommunityListStringEntry,,not-accessible,snIpCommunityListStringName:snIpCommunityListStringSequence,mandatory,,An entry in the Ip Community ListString table.
.1.3.6.1.4.1.11.2.3.7.11.12.2.2.17.1.1,HP-SN-IP-MIB::snIpCommunityListStringName,OCTET,read-only,,mandatory,,The table index for a filter entry.
.1.3.6.1.4.1.11.2.3.7.11.12.2.2.17.1.2,HP-SN-IP-MIB::snIpCommunityListStringSequence,INTEGER,read-only,,mandatory,,The table sequence index for a filter entry.
.1.3.6.1.4.1.11.2.3.7.11.12.2.2.17.1.3,HP-SN-IP-MIB::snIpCommunityListStringAction,INTEGER,read-write,,mandatory,deny(0):permit(1),Action to take if the bgp address match
.1.3.6.1.4.1.11.2.3.7.11.12.2.2.17.1.4,HP-SN-IP-MIB::snIpCommunityListStringCommNum,OCTET,read-write,,mandatory,,A number from 1 to 0xFFFFFFFF. There are 20 of them. 
.1.3.6.1.4.1.11.2.3.7.11.12.2.2.17.1.5,HP-SN-IP-MIB::snIpCommunityListStringInternet,INTEGER,read-write,,mandatory,disabled(0):enabled(1),Disabled/Enabled the Internet Community.
.1.3.6.1.4.1.11.2.3.7.11.12.2.2.17.1.6,HP-SN-IP-MIB::snIpCommunityListStringNoAdvertise,INTEGER,read-write,,mandatory,false(0):true(1),Do not advertise this route to any peer (internal or external).
.1.3.6.1.4.1.11.2.3.7.11.12.2.2.17.1.7,HP-SN-IP-MIB::snIpCommunityListStringNoExport,INTEGER,read-write,,mandatory,false(0):true(1),Do not advertise this route to an EBGP peer.
.1.3.6.1.4.1.11.2.3.7.11.12.2.2.17.1.8,HP-SN-IP-MIB::snIpCommunityListStringRowStatus,INTEGER,read-write,,mandatory,invalid(1):valid(2):delete(3):create(4):modify(5),This object is used to create and
.1.3.6.1.4.1.11.2.3.7.11.12.2.2.17.1.9,HP-SN-IP-MIB::snIpCommunityListStringLocalAs,INTEGER,read-write,,mandatory,false(0):true(1),Send this route to peers in other sub-autonomous systems within
.1.3.6.1.4.1.11.2.3.7.11.12.2.2.18,HP-SN-IP-MIB::snRtIpPortIfAddrTable,,not-accessible,,mandatory,,IP port If address table.
.1.3.6.1.4.1.11.2.3.7.11.12.2.2.18.1,HP-SN-IP-MIB::snRtIpPortIfAddrEntry,,not-accessible,snRtIpPortIfAddrInterfaceIndex:snRtIpPortIfAddress,mandatory,,An entry in the IP Port Address table.
.1.3.6.1.4.1.11.2.3.7.11.12.2.2.18.1.1,HP-SN-IP-MIB::snRtIpPortIfAddrInterfaceIndex,Integer32,read-only,,mandatory,,The InterfaceIndex for port address entry.
.1.3.6.1.4.1.11.2.3.7.11.12.2.2.18.1.2,HP-SN-IP-MIB::snRtIpPortIfAddress,IpAddress,read-only,,mandatory,,The port IP address.
.1.3.6.1.4.1.11.2.3.7.11.12.2.2.18.1.3,HP-SN-IP-MIB::snRtIpPortIfSubnetMask,IpAddress,read-write,,mandatory,,The port IP address subnet mask.
.1.3.6.1.4.1.11.2.3.7.11.12.2.2.18.1.4,HP-SN-IP-MIB::snRtIpPortIfAddrType,INTEGER,read-write,,mandatory,primary(1):secondary(2),The port IP address type.
.1.3.6.1.4.1.11.2.3.7.11.12.2.2.18.1.5,HP-SN-IP-MIB::snRtIpPortIfRowStatus,INTEGER,read-write,,mandatory,other(1):valid(2):delete(3):create(4),To create or delete a port address
.1.3.6.1.4.1.11.2.3.7.11.12.2.2.19,HP-SN-IP-MIB::snRtIpPortIfAccessTable,,not-accessible,,mandatory,,IP port If access table.
.1.3.6.1.4.1.11.2.3.7.11.12.2.2.19.1,HP-SN-IP-MIB::snRtIpPortIfAccessEntry,,not-accessible,snRtIpPortIfAccessInterfaceIndex:snRtIpPortIfAccessDirection,mandatory,,An entry in the IP Port access table.
.1.3.6.1.4.1.11.2.3.7.11.12.2.2.19.1.1,HP-SN-IP-MIB::snRtIpPortIfAccessInterfaceIndex,Integer32,read-only,,mandatory,,The InterfaceIndex for port access entry.
.1.3.6.1.4.1.11.2.3.7.11.12.2.2.19.1.2,HP-SN-IP-MIB::snRtIpPortIfAccessDirection,INTEGER,read-only,,mandatory,in(1):out(2),The incoming or outgoing check
.1.3.6.1.4.1.11.2.3.7.11.12.2.2.19.1.3,HP-SN-IP-MIB::snRtIpPortIfAccessFilters,OCTET,read-write,,mandatory,,1st octet correspond to 1st filter 
.1.3.6.1.4.1.11.2.3.7.11.12.2.2.19.1.4,HP-SN-IP-MIB::snRtIpPortIfAccessRowStatus,INTEGER,read-write,,mandatory,other(1):valid(2):delete(3):create(4),To create or delete a port access
.1.3.6.1.4.1.11.2.3.7.11.12.2.2.20,HP-SN-IP-MIB::snRtIpPortIfConfigTable,,not-accessible,,mandatory,,IP port If Config table.
.1.3.6.1.4.1.11.2.3.7.11.12.2.2.20.1,HP-SN-IP-MIB::snRtIpPortIfConfigEntry,,not-accessible,snRtIpPortIfConfigInterfaceIndex,mandatory,,An entry in the IP Port Config table.
.1.3.6.1.4.1.11.2.3.7.11.12.2.2.20.1.1,HP-SN-IP-MIB::snRtIpPortIfConfigInterfaceIndex,Integer32,read-only,,mandatory,,The If index for port config entry.
.1.3.6.1.4.1.11.2.3.7.11.12.2.2.20.1.2,HP-SN-IP-MIB::snRtIpPortIfMtu,INTEGER,read-write,,mandatory,,The maximun transfer unit.
.1.3.6.1.4.1.11.2.3.7.11.12.2.2.20.1.3,HP-SN-IP-MIB::snRtIpPortIfEncap,INTEGER,read-write,,mandatory,ethernet(1):snap(2):hdlc(3):ppp(4):other(5),Data link encapsulation to be used
.1.3.6.1.4.1.11.2.3.7.11.12.2.2.20.1.4,HP-SN-IP-MIB::snRtIpPortIfMetric,INTEGER,read-write,,mandatory,,The metric.
.1.3.6.1.4.1.11.2.3.7.11.12.2.2.20.1.5,HP-SN-IP-MIB::snRtIpPortIfDirBcastFwd,INTEGER,read-write,,mandatory,disabled(0):enabled(1),Enable/Disable directed broadcast forwarding on the port.
.1.3.6.1.4.1.11.2.3.7.11.12.2.3,HP-SN-ROOT-MIB::snRip,,,,,,
.1.3.6.1.4.1.11.2.3.7.11.12.2.3.1,HP-SN-IP-MIB::snRtIpRipGeneral,,,,,,
.1.3.6.1.4.1.11.2.3.7.11.12.2.3.1.1,HP-SN-IP-MIB::snRtIpRipEnable,INTEGER,read-write,,mandatory,disabled(0):enabled(1),Enable/disable ip rip routing.
.1.3.6.1.4.1.11.2.3.7.11.12.2.3.1.2,HP-SN-IP-MIB::snRtIpRipUpdateTime,INTEGER,read-write,,mandatory,,Ip rip update interval in seconds.
.1.3.6.1.4.1.11.2.3.7.11.12.2.3.1.3,HP-SN-IP-MIB::snRtIpRipRedisEnable,INTEGER,read-write,,mandatory,disabled(0):enabled(1),Enable/disable redistribution to rip.
.1.3.6.1.4.1.11.2.3.7.11.12.2.3.1.4,HP-SN-IP-MIB::snRtIpRipRedisDefMetric,INTEGER,read-write,,mandatory,,Default metric to be used when redistribute route to rip.
.1.3.6.1.4.1.11.2.3.7.11.12.2.3.1.5,HP-SN-IP-MIB::snRtIpRipSetAllPortConfig,INTEGER,read-write,,mandatory,,The value of this object is an index number of a
.1.3.6.1.4.1.11.2.3.7.11.12.2.3.1.6,HP-SN-IP-MIB::snRtIpRipGblFiltList,OCTET,read-write,,mandatory,,An ip rip global filter list, of which each octet contains a
.1.3.6.1.4.1.11.2.3.7.11.12.2.3.1.7,HP-SN-IP-MIB::snRtIpRipFiltOnAllPort,INTEGER,read-write,,mandatory,valid(1):deleteAllInBound(2):deleteAllOutBound(3):addAllInBound(4):addAllOutBound(5),Apply the ip rip global filter list snRtIpRipGblFiltList to
.1.3.6.1.4.1.11.2.3.7.11.12.2.3.1.8,HP-SN-IP-MIB::snRtIpRipDistance,INTEGER,read-write,,mandatory,,Administration distance.
.1.3.6.1.4.1.11.2.3.7.11.12.2.3.2,HP-SN-IP-MIB::snRtIpRipPortConfigTable,,not-accessible,,deprecated,,IP Rip port Config table.
.1.3.6.1.4.1.11.2.3.7.11.12.2.3.2.1,HP-SN-IP-MIB::snRtIpRipPortConfigEntry,,not-accessible,snRtIpRipPortConfigPortIndex,deprecated,,An entry in the IP Rip Port Config table.
.1.3.6.1.4.1.11.2.3.7.11.12.2.3.2.1.1,HP-SN-IP-MIB::snRtIpRipPortConfigPortIndex,INTEGER,read-only,,deprecated,,The port index for ip rip port config entry.
.1.3.6.1.4.1.11.2.3.7.11.12.2.3.2.1.2,HP-SN-IP-MIB::snRtIpRipPortVersion,INTEGER,read-write,,deprecated,disabled(0):v1Only(1):v2Only(2):v1CompatibleV2(3),The ip rip version on this port.
.1.3.6.1.4.1.11.2.3.7.11.12.2.3.2.1.3,HP-SN-IP-MIB::snRtIpRipPortPoisonReverse,INTEGER,read-write,,deprecated,disabled(0):enabled(1),Enable/disable poison reverse.
.1.3.6.1.4.1.11.2.3.7.11.12.2.3.2.1.4,HP-SN-IP-MIB::snRtIpRipPortLearnDefault,INTEGER,read-write,,deprecated,disabled(0):enabled(1),Apply the RIP router protocol learn-default option to the
.1.3.6.1.4.1.11.2.3.7.11.12.2.3.3,HP-SN-IP-MIB::snRtIpRipRedisTable,,not-accessible,,mandatory,,IP Rip Redistribution table.
.1.3.6.1.4.1.11.2.3.7.11.12.2.3.3.1,HP-SN-IP-MIB::snRtIpRipRedisEntry,,not-accessible,snRtIpRipRedisIndex,mandatory,,An entry in the IP Rip Redistribution table.
.1.3.6.1.4.1.11.2.3.7.11.12.2.3.3.1.1,HP-SN-IP-MIB::snRtIpRipRedisIndex,INTEGER,read-only,,mandatory,,The table index for a IP Rip Redistribution entry.
.1.3.6.1.4.1.11.2.3.7.11.12.2.3.3.1.2,HP-SN-IP-MIB::snRtIpRipRedisAction,INTEGER,read-write,,mandatory,deny(0):permit(1),The action to take when match this 
.1.3.6.1.4.1.11.2.3.7.11.12.2.3.3.1.3,HP-SN-IP-MIB::snRtIpRipRedisProtocol,INTEGER,read-write,,mandatory,other(1):all(2):static(3):ospf(4):bgp(5):isis(6),The protocol to be distributed. other(1) cannot be  used for SNMP-SET.
.1.3.6.1.4.1.11.2.3.7.11.12.2.3.3.1.4,HP-SN-IP-MIB::snRtIpRipRedisIp,IpAddress,read-write,,mandatory,,The ip address of the ip route to be distributed.
.1.3.6.1.4.1.11.2.3.7.11.12.2.3.3.1.5,HP-SN-IP-MIB::snRtIpRipRedisMask,IpAddress,read-write,,mandatory,,The ip subnet mask of the ip route to be distributed.
.1.3.6.1.4.1.11.2.3.7.11.12.2.3.3.1.6,HP-SN-IP-MIB::snRtIpRipRedisMatchMetric,INTEGER,read-write,,mandatory,,The metric of the route to be matched
.1.3.6.1.4.1.11.2.3.7.11.12.2.3.3.1.7,HP-SN-IP-MIB::snRtIpRipRedisSetMetric,INTEGER,read-write,,mandatory,,The new metric of the route to be advertised.
.1.3.6.1.4.1.11.2.3.7.11.12.2.3.3.1.8,HP-SN-IP-MIB::snRtIpRipRedisRowStatus,INTEGER,read-write,,mandatory,other(1):valid(2):delete(3):create(4),To create or delete a Redistribution entry.
.1.3.6.1.4.1.11.2.3.7.11.12.2.3.4,HP-SN-IP-MIB::snRtIpRipRouteFilterTable,,not-accessible,,mandatory,,ip rip route filter table.
.1.3.6.1.4.1.11.2.3.7.11.12.2.3.4.1,HP-SN-IP-MIB::snRtIpRipRouteFilterEntry,,not-accessible,snRtIpRipRouteFilterId,mandatory,,An entry of the ip rip route filter table.
.1.3.6.1.4.1.11.2.3.7.11.12.2.3.4.1.1,HP-SN-IP-MIB::snRtIpRipRouteFilterId,INTEGER,read-only,,mandatory,,The filter ID to identify a filter entry.
.1.3.6.1.4.1.11.2.3.7.11.12.2.3.4.1.2,HP-SN-IP-MIB::snRtIpRipRouteFilterAction,INTEGER,read-write,,mandatory,deny(0):permit(1),Action to take if the ip rip packet matched
.1.3.6.1.4.1.11.2.3.7.11.12.2.3.4.1.3,HP-SN-IP-MIB::snRtIpRipRouteFilterIpAddr,IpAddress,read-write,,mandatory,,Route IP address to compare with any route IP addresses
.1.3.6.1.4.1.11.2.3.7.11.12.2.3.4.1.4,HP-SN-IP-MIB::snRtIpRipRouteFilterSubnetMask,IpAddress,read-write,,mandatory,,Subnet mask to apply to the route IP address in a ip rip
.1.3.6.1.4.1.11.2.3.7.11.12.2.3.4.1.5,HP-SN-IP-MIB::snRtIpRipRouteFilterRowStatus,INTEGER,read-write,,mandatory,invalid(1):valid(2):delete(3):create(4):modify(5),This object is used to create and
.1.3.6.1.4.1.11.2.3.7.11.12.2.3.5,HP-SN-IP-MIB::snRtIpRipNbrFilterTable,,not-accessible,,mandatory,,ip rip neighbor filter table.
.1.3.6.1.4.1.11.2.3.7.11.12.2.3.5.1,HP-SN-IP-MIB::snRtIpRipNbrFilterEntry,,not-accessible,snRtIpRipNbrFilterId,mandatory,,An entry of the ip rip neighbor filter table.
.1.3.6.1.4.1.11.2.3.7.11.12.2.3.5.1.1,HP-SN-IP-MIB::snRtIpRipNbrFilterId,INTEGER,read-only,,mandatory,,The filter ID to identify a filter entry.
.1.3.6.1.4.1.11.2.3.7.11.12.2.3.5.1.2,HP-SN-IP-MIB::snRtIpRipNbrFilterAction,INTEGER,read-write,,mandatory,deny(0):permit(1),Action to take if the ip rip packet source IP
.1.3.6.1.4.1.11.2.3.7.11.12.2.3.5.1.3,HP-SN-IP-MIB::snRtIpRipNbrFilterSourceIp,IpAddress,read-write,,mandatory,,Source IP address to compare with the source IP
.1.3.6.1.4.1.11.2.3.7.11.12.2.3.5.1.4,HP-SN-IP-MIB::snRtIpRipNbrFilterRowStatus,INTEGER,read-write,,mandatory,invalid(1):valid(2):delete(3):create(4):modify(5),This object is used to create and
.1.3.6.1.4.1.11.2.3.7.11.12.2.3.6,HP-SN-IP-MIB::snRtIpRipPortAccessTable,,not-accessible,,deprecated,,ip interface rip access table.
.1.3.6.1.4.1.11.2.3.7.11.12.2.3.6.1,HP-SN-IP-MIB::snRtIpRipPortAccessEntry,,not-accessible,snRtIpRipPortAccessPort:snRtIpRipPortAccessDir,deprecated,,An entry of the ip interface rip access table.
.1.3.6.1.4.1.11.2.3.7.11.12.2.3.6.1.1,HP-SN-IP-MIB::snRtIpRipPortAccessPort,INTEGER,read-only,,deprecated,,The ip interface to which the rip filter applies.
.1.3.6.1.4.1.11.2.3.7.11.12.2.3.6.1.2,HP-SN-IP-MIB::snRtIpRipPortAccessDir,INTEGER,read-only,,deprecated,in(1):out(2),The access direction of incoming packet filter
.1.3.6.1.4.1.11.2.3.7.11.12.2.3.6.1.3,HP-SN-IP-MIB::snRtIpRipPortAccessFilterList,OCTET,read-write,,deprecated,,An ip rip filter list, of which each octet contains
.1.3.6.1.4.1.11.2.3.7.11.12.2.3.6.1.4,HP-SN-IP-MIB::snRtIpRipPortAccessRowStatus,INTEGER,read-write,,deprecated,invalid(1):valid(2):delete(3):create(4):modify(5),This object is used to create and
.1.3.6.1.4.1.11.2.3.7.11.12.2.3.7,HP-SN-IP-MIB::snRtIpRipPortIfConfigTable,,not-accessible,,mandatory,,IP Rip port If Config table.
.1.3.6.1.4.1.11.2.3.7.11.12.2.3.7.1,HP-SN-IP-MIB::snRtIpRipPortIfConfigEntry,,not-accessible,snRtIpRipPortIfConfigInterfaceIndex,mandatory,,An entry in the IP Rip Port If Config table.
.1.3.6.1.4.1.11.2.3.7.11.12.2.3.7.1.1,HP-SN-IP-MIB::snRtIpRipPortIfConfigInterfaceIndex,Integer32,read-only,,mandatory,,The If index for ip rip port config entry.
.1.3.6.1.4.1.11.2.3.7.11.12.2.3.7.1.2,HP-SN-IP-MIB::snRtIpRipPortIfVersion,INTEGER,read-write,,mandatory,disabled(0):v1Only(1):v2Only(2):v1CompatibleV2(3),The ip rip version on this port.
.1.3.6.1.4.1.11.2.3.7.11.12.2.3.7.1.3,HP-SN-IP-MIB::snRtIpRipPortIfPoisonReverse,INTEGER,read-write,,mandatory,disabled(0):enabled(1),Enable/disable poison reverse.
.1.3.6.1.4.1.11.2.3.7.11.12.2.3.7.1.4,HP-SN-IP-MIB::snRtIpRipPortIfLearnDefault,INTEGER,read-write,,mandatory,disabled(0):enabled(1),Apply the RIP router protocol learn-default option to the
.1.3.6.1.4.1.11.2.3.7.11.12.2.3.8,HP-SN-IP-MIB::snRtIpRipPortIfAccessTable,,not-accessible,,mandatory,,ip interface rip access table.
.1.3.6.1.4.1.11.2.3.7.11.12.2.3.8.1,HP-SN-IP-MIB::snRtIpRipPortIfAccessEntry,,not-accessible,snRtIpRipPortIfAccessPort:snRtIpRipPortIfAccessDir,mandatory,,An entry of the ip interface rip access table.
.1.3.6.1.4.1.11.2.3.7.11.12.2.3.8.1.1,HP-SN-IP-MIB::snRtIpRipPortIfAccessPort,Integer32,read-only,,mandatory,,The ip interface to which the rip filter applies.
.1.3.6.1.4.1.11.2.3.7.11.12.2.3.8.1.2,HP-SN-IP-MIB::snRtIpRipPortIfAccessDir,INTEGER,read-only,,mandatory,in(1):out(2),The access direction of incoming packet filter
.1.3.6.1.4.1.11.2.3.7.11.12.2.3.8.1.3,HP-SN-IP-MIB::snRtIpRipPortIfAccessFilterList,OCTET,read-write,,mandatory,,An ip rip filter list, of which each octet contains
.1.3.6.1.4.1.11.2.3.7.11.12.2.3.8.1.4,HP-SN-IP-MIB::snRtIpRipPortIfAccessRowStatus,INTEGER,read-write,,mandatory,invalid(1):valid(2):delete(3):create(4):modify(5),This object is used to create and
.1.3.6.1.4.1.11.2.3.7.11.12.2.4,HP-SN-ROOT-MIB::snOspf,,,,,,
.1.3.6.1.4.1.11.2.3.7.11.12.2.4.1,HP-SN-OSPF-GROUP-MIB::snOspfGen,,,,,,
.1.3.6.1.4.1.11.2.3.7.11.12.2.4.1.1,HP-SN-OSPF-GROUP-MIB::snOspfRouterId,IpAddress,read-write,,mandatory,,A 32-bit integer uniquely identifying the router in the Autonomous System. By convention, to ensure uniqueness, this should default to the value of one of the router's IP interface addresses.
.1.3.6.1.4.1.11.2.3.7.11.12.2.4.1.2,HP-SN-OSPF-GROUP-MIB::snOspfAdminStat,INTEGER,read-write,,mandatory,disabled(0):enabled(1),The administrative status of OSPF in the router. The value 'enabled' denotes that the OSPF Process is active on at least one interface; 'disabled' disables it on all interfaces.
.1.3.6.1.4.1.11.2.3.7.11.12.2.4.1.3,HP-SN-OSPF-GROUP-MIB::snOspfASBdrRtrStatus,INTEGER,read-write,,mandatory,false(0):true(1),A flag to note whether this router is an Autonomous System border router.
.1.3.6.1.4.1.11.2.3.7.11.12.2.4.1.4,HP-SN-OSPF-GROUP-MIB::snOspfRedisMode,INTEGER,read-write,,mandatory,disabled(0):enabled(1),The Redistribution status of OSPF in the router. The value 'enabled' denotes that the OSPF Redistribution is  active; 'disabled' disables it on the router.
.1.3.6.1.4.1.11.2.3.7.11.12.2.4.1.5,HP-SN-OSPF-GROUP-MIB::snOspfDefaultOspfMetricValue,INTEGER,read-write,,mandatory,,The metric of using a default OSPF Metric value on this route.
.1.3.6.1.4.1.11.2.3.7.11.12.2.4.1.6,HP-SN-OSPF-GROUP-MIB::snOspfExternLSACount,Gauge32,read-only,,mandatory,,The number of external (LS type 5) link-state advertisements in the link-state database.
.1.3.6.1.4.1.11.2.3.7.11.12.2.4.1.7,HP-SN-OSPF-GROUP-MIB::snOspfExternLSACksumSum,INTEGER,read-only,,mandatory,,The 32-bit unsigned sum of the LS checksums of the external link-state advertisements contained in the link-state database. This sum can be used to determine if there has been a change in a router's link state database, and to compare the link-state database of two routers.
.1.3.6.1.4.1.11.2.3.7.11.12.2.4.1.8,HP-SN-OSPF-GROUP-MIB::snOspfOriginateNewLSAs,Counter32,read-only,,mandatory,,The number of new link-state advertisements that have been originated. This number is incremented each time the router originates a new LSA.
.1.3.6.1.4.1.11.2.3.7.11.12.2.4.1.9,HP-SN-OSPF-GROUP-MIB::snOspfRxNewLSAs,Counter32,read-only,,mandatory,,The number of link-state advertisements received determined to be new instantiations. This number does not include newer instantiations of self-originated link-state advertisements.
.1.3.6.1.4.1.11.2.3.7.11.12.2.4.1.10,HP-SN-OSPF-GROUP-MIB::snOspfOspfRedisMetricType,INTEGER,read-write,,mandatory,type1(1):type2(2),type1: For External Type 1 (comparable value) the  intra-area and inter-area routes,  it is an OSPF metric plus the External Metric. type2: For external Type 2 (non-comparable value) routes,  it is the external metric.
.1.3.6.1.4.1.11.2.3.7.11.12.2.4.1.11,HP-SN-OSPF-GROUP-MIB::snOspfExtLsdbLimit,INTEGER,read-write,,mandatory,,The maximum number of non-default AS- external-LSAs entries that can be stored in the link-state database. If the value is -1, then there is no limit. When the number of non-default AS-external-LSAs in a router's link-state database reaches ospfExtLsdbLimit, the router enters Overflow- State. The router never holds more than ospfExtLsdbLimit non-default AS-external-LSAs in its database. OspfExtLsdbLimit MUST be set identically in all routers attached to the OSPF backbone and/or any regular OSPF area. (i.e., OSPF stub areas and NSSAs are excluded).
.1.3.6.1.4.1.11.2.3.7.11.12.2.4.1.12,HP-SN-OSPF-GROUP-MIB::snOspfExitOverflowInterval,INTEGER,read-write,,mandatory,,The number of seconds that, after entering OverflowState, a router will attempt to leave OverflowState. This allows the router to again originate non-default AS-external-LSAs. When set to 0, the router will not leave Overflow- State until restarted.
.1.3.6.1.4.1.11.2.3.7.11.12.2.4.1.13,HP-SN-OSPF-GROUP-MIB::snOspfRfc1583Compatibility,INTEGER,read-write,,mandatory,disabled(0):enabled(1),This allows the ospf routing either compatible with
.1.3.6.1.4.1.11.2.3.7.11.12.2.4.1.14,HP-SN-OSPF-GROUP-MIB::snOspfRouterIdFormat,INTEGER,read-write,,mandatory,integer(0):ipAddress(1),This object is used to specify whether
.1.3.6.1.4.1.11.2.3.7.11.12.2.4.1.15,HP-SN-OSPF-GROUP-MIB::snOspfDistance,INTEGER,read-write,,obsolete,,OSPF Adminitrative distance.
.1.3.6.1.4.1.11.2.3.7.11.12.2.4.1.16,HP-SN-OSPF-GROUP-MIB::snOspfDistanceIntra,INTEGER,read-write,,mandatory,,OSPF Adminitrative distance - Intra Area.
.1.3.6.1.4.1.11.2.3.7.11.12.2.4.1.17,HP-SN-OSPF-GROUP-MIB::snOspfDistanceInter,INTEGER,read-write,,mandatory,,OSPF Adminitrative distance - Inter Area.
.1.3.6.1.4.1.11.2.3.7.11.12.2.4.1.18,HP-SN-OSPF-GROUP-MIB::snOspfDistanceExternal,INTEGER,read-write,,mandatory,,OSPF Adminitrative distance - External.
.1.3.6.1.4.1.11.2.3.7.11.12.2.4.2,HP-SN-OSPF-GROUP-MIB::snOspfArea,,,,,,
.1.3.6.1.4.1.11.2.3.7.11.12.2.4.2.1,HP-SN-OSPF-GROUP-MIB::snOspfAreaTable,,not-accessible,,mandatory,,Information describing the configured parameters and cumulative statistics of the router's attached areas.
.1.3.6.1.4.1.11.2.3.7.11.12.2.4.2.1.1,HP-SN-OSPF-GROUP-MIB::snOspfAreaEntry,,not-accessible,snOspfAreaId,mandatory,,Information describing the configured parameters and cumulative statistics of one of the router's attached areas.
.1.3.6.1.4.1.11.2.3.7.11.12.2.4.2.1.1.1,HP-SN-OSPF-GROUP-MIB::snOspfAreaId,IpAddress,read-only,,mandatory,,A 32-bit integer uniquely identifying an area. Area ID 0.0.0.0 is used for the OSPF backbone.
.1.3.6.1.4.1.11.2.3.7.11.12.2.4.2.1.1.2,HP-SN-OSPF-GROUP-MIB::snOspfImportASExtern,INTEGER,read-write,,mandatory,,The area's support for importing AS external link- state advertisements.  0: Stub Area Type 1: Normal Area Type 2: NSSA Area Type
.1.3.6.1.4.1.11.2.3.7.11.12.2.4.2.1.1.3,HP-SN-OSPF-GROUP-MIB::snOspfStubMetric,INTEGER,read-write,,mandatory,,The metric value applied at the default type of service(ospfMetric). By default, this equals the  least metric at the type of service among the  interfaces to other areas. This Object exist if only if the value of snOspfAreaSummary is  snOspfAreaSummary(2); Otherwise, an SNMP_GET/GET_NEXT  attempt of this Object will return NO_SUCH_NAME.
.1.3.6.1.4.1.11.2.3.7.11.12.2.4.2.1.1.4,HP-SN-OSPF-GROUP-MIB::snOspfAreaRowStatus,INTEGER,read-write,,mandatory,invalid(1):valid(2):delete(3):create(4):modify(5),This object is used to create and rendering it inoperative..
.1.3.6.1.4.1.11.2.3.7.11.12.2.4.2.1.1.5,HP-SN-OSPF-GROUP-MIB::snOspfAreaIdFormat,INTEGER,read-write,,mandatory,integer(0):ipAddress(1),This object is used to specify whether
.1.3.6.1.4.1.11.2.3.7.11.12.2.4.3,HP-SN-OSPF-GROUP-MIB::snOspfAddrRange,,,,,,
.1.3.6.1.4.1.11.2.3.7.11.12.2.4.3.1,HP-SN-OSPF-GROUP-MIB::snOspfAreaRangeTable,,not-accessible,,mandatory,,A range if IP addresses specified by an IP address/IP network mask pair. For example, class B address range of X.X.X.X with a network mask of 255.255.0.0 includes all IP addresses from X.X.0.0 to X.X.255.255
.1.3.6.1.4.1.11.2.3.7.11.12.2.4.3.1.1,HP-SN-OSPF-GROUP-MIB::snOspfAreaRangeEntry,,not-accessible,snOspfAreaRangeAreaID:snOspfAreaRangeNet,mandatory,,A range if IP addresses specified by an IP address/IP network mask pair. For example, class B address range of X.X.X.X with a network mask of 255.255.0.0 includes all IP addresses from X.X.0.0 to X.X.255.255
.1.3.6.1.4.1.11.2.3.7.11.12.2.4.3.1.1.1,HP-SN-OSPF-GROUP-MIB::snOspfAreaRangeAreaID,IpAddress,read-only,,mandatory,,The Area the Address Range is to be found within.
.1.3.6.1.4.1.11.2.3.7.11.12.2.4.3.1.1.2,HP-SN-OSPF-GROUP-MIB::snOspfAreaRangeNet,IpAddress,read-only,,mandatory,,The IP Address of the Net or Subnet indicated by the range.
.1.3.6.1.4.1.11.2.3.7.11.12.2.4.3.1.1.3,HP-SN-OSPF-GROUP-MIB::snOspfAreaRangeMask,IpAddress,read-write,,mandatory,,The Subnet Mask that pertains to the Net or Subnet.
.1.3.6.1.4.1.11.2.3.7.11.12.2.4.3.1.1.4,HP-SN-OSPF-GROUP-MIB::snOspfAreaRangeRowStatus,INTEGER,read-write,,mandatory,invalid(1):valid(2):delete(3):create(4):modify(5),This object is used to create and rendering it inoperative..
.1.3.6.1.4.1.11.2.3.7.11.12.2.4.3.1.1.5,HP-SN-OSPF-GROUP-MIB::snOspfAreaRangeAreaIdFormat,INTEGER,read-only,,mandatory,integer(0):ipAddress(1),This object is used to specify whether
.1.3.6.1.4.1.11.2.3.7.11.12.2.4.4,HP-SN-OSPF-GROUP-MIB::snOspfIntf,,,,,,
.1.3.6.1.4.1.11.2.3.7.11.12.2.4.4.1,HP-SN-OSPF-GROUP-MIB::snOspfIfTable,,not-accessible,,deprecated,,The OSPF Interface Table describes the interfaces from the viewpoint of OSPF.
.1.3.6.1.4.1.11.2.3.7.11.12.2.4.4.1.1,HP-SN-OSPF-GROUP-MIB::snOspfIfEntry,,not-accessible,snOspfIfPort,deprecated,,The OSPF Interface Entry describes one interface from the viewpoint of OSPF.
.1.3.6.1.4.1.11.2.3.7.11.12.2.4.4.1.1.1,HP-SN-OSPF-GROUP-MIB::snOspfIfPort,INTEGER,read-only,,deprecated,,The physical router port of this OSPF interface.
.1.3.6.1.4.1.11.2.3.7.11.12.2.4.4.1.1.2,HP-SN-OSPF-GROUP-MIB::snOspfIfAreaId,IpAddress,read-write,,deprecated,,A 32-bit integer uniquely identifying the area to which the interface connects. Area ID 0.0.0.0 is used for the OSPF backbone.
.1.3.6.1.4.1.11.2.3.7.11.12.2.4.4.1.1.3,HP-SN-OSPF-GROUP-MIB::snOspfIfAdminStat,INTEGER,read-write,,deprecated,disabled(0):enabled(1),The OSPF interface's administrative status. The value 'enabled' denotes that neighbor relationships may be formed on the interface, and the interface will be advertised as an internal route to some area. The value 'disabled' denotes that the interface is external to OSPF.
.1.3.6.1.4.1.11.2.3.7.11.12.2.4.4.1.1.4,HP-SN-OSPF-GROUP-MIB::snOspfIfRtrPriority,INTEGER,read-write,,deprecated,,The priority of this interface. Used in multi-access networks, this field is used in the designated router election algorithm. The value 0 signifies that the router is not eligible to become the designated router on this particular network. In the event of a tie in this value, routers will use their router id as a tie breaker.
.1.3.6.1.4.1.11.2.3.7.11.12.2.4.4.1.1.5,HP-SN-OSPF-GROUP-MIB::snOspfIfTransitDelay,INTEGER,read-write,,deprecated,,The estimated number of seconds it takes to transmit a link- state update packet over this interface.
.1.3.6.1.4.1.11.2.3.7.11.12.2.4.4.1.1.6,HP-SN-OSPF-GROUP-MIB::snOspfIfRetransInterval,INTEGER,read-write,,deprecated,,The number of seconds between link-state advertisement retransmissions, for adjacencies belonging to this interface. This value is also used when retransmitting database description and link-state request packets.
.1.3.6.1.4.1.11.2.3.7.11.12.2.4.4.1.1.7,HP-SN-OSPF-GROUP-MIB::snOspfIfHelloInterval,INTEGER,read-write,,deprecated,,The length of time, in seconds, between the Hello packets that the router sends on the interface. This value must be the same for all routers attached to a common network.
.1.3.6.1.4.1.11.2.3.7.11.12.2.4.4.1.1.8,HP-SN-OSPF-GROUP-MIB::snOspfIfRtrDeadInterval,INTEGER,read-write,,deprecated,,The number of seconds that a router's Hello packets have not been seen before it's neighbors declare the router down. This should be some multiple of the Hello interval. This value must be the same for all routers attached to a common network.
.1.3.6.1.4.1.11.2.3.7.11.12.2.4.4.1.1.9,HP-SN-OSPF-GROUP-MIB::snOspfIfAuthType,INTEGER,read-write,,deprecated,,The authentication type specified for an interface. Additional authentication types may be assigned locally on a per interface basis.
.1.3.6.1.4.1.11.2.3.7.11.12.2.4.4.1.1.10,HP-SN-OSPF-GROUP-MIB::snOspfIfAuthKey,OCTET,read-write,,deprecated,,The Authentication Key. If the Area's Authorization Type is simplePassword, and the key length is shorter than 8 octets, the agent will left adjust and zero fill to 8 octets. When read, snOspfIfAuthKey always returns an Octet String of length zero.
.1.3.6.1.4.1.11.2.3.7.11.12.2.4.4.1.1.11,HP-SN-OSPF-GROUP-MIB::snOspfIfMetricValue,INTEGER,read-write,,deprecated,,The metric of using this type of service on this interface. The default value of the TOS 0 Metric is 10^8 / ifSpeed.
.1.3.6.1.4.1.11.2.3.7.11.12.2.4.4.1.1.12,HP-SN-OSPF-GROUP-MIB::snOspfIfRowStatus,INTEGER,read-write,,deprecated,invalid(1):valid(2):delete(3):create(4):modify(5),This object is used to create and rendering it inoperative..
.1.3.6.1.4.1.11.2.3.7.11.12.2.4.4.1.1.13,HP-SN-OSPF-GROUP-MIB::snOspfIfMd5AuthKeyId,INTEGER,read-write,,deprecated,,The md5 authentication key ID. If the snOspfVirtIfAuthType is set to md5, the value of snOspfIfMd5AuthKeyId must be (1 to 255). This field identifies the algorithm and secret  key used to create the message digest appended to the OSPF  packet. Key Identifiers are unique per-interface  (or equivalently, per-subnet).
.1.3.6.1.4.1.11.2.3.7.11.12.2.4.4.1.1.14,HP-SN-OSPF-GROUP-MIB::snOspfIfMd5AuthKey,OCTET,read-write,,deprecated,,The MD5 Authentication Key. If the Area's Authorization Type is md5, and the key length is shorter than 16 octets,  the agent will left adjust and zero fill to 16 octets. When read, snOspfIfMd5AuthKey always returns an Octet String of length zero.
.1.3.6.1.4.1.11.2.3.7.11.12.2.4.4.1.1.15,HP-SN-OSPF-GROUP-MIB::snOspfIfMd5ActivationWaitTime,INTEGER,read-write,,deprecated,,The md5 authentication key activation wait time is specified in second and the maximum wait time is 14400 seconds (4 hours).
.1.3.6.1.4.1.11.2.3.7.11.12.2.4.4.1.1.16,HP-SN-OSPF-GROUP-MIB::snOspfIfAreaIdFormat,INTEGER,read-only,,deprecated,integer(0):ipAddress(1),This object is used to specify whether
.1.3.6.1.4.1.11.2.3.7.11.12.2.4.4.1.1.17,HP-SN-OSPF-GROUP-MIB::snOspfIfPassiveMode,INTEGER,read-write,,deprecated,disabled(0):enabled(1),This object control the passive mode of this interface.
.1.3.6.1.4.1.11.2.3.7.11.12.2.4.4.1.1.18,HP-SN-OSPF-GROUP-MIB::snOspfIfDatabaseFilterAllOut,INTEGER,read-write,,deprecated,disabled(0):enabled(1),This object control the filtering of outgoing OSPF LSA on this interface.
.1.3.6.1.4.1.11.2.3.7.11.12.2.4.4.1.1.19,HP-SN-OSPF-GROUP-MIB::snOspfIfMtuIgnore,INTEGER,read-write,,deprecated,disabled(0):enabled(1),This object control MTU detection mode of this interface.
.1.3.6.1.4.1.11.2.3.7.11.12.2.4.4.1.1.20,HP-SN-OSPF-GROUP-MIB::snOspfIfNetworkP2mp,INTEGER,read-write,,deprecated,disabled(0):enabled(1),This object enable/disable P2MP mode of this interface.
.1.3.6.1.4.1.11.2.3.7.11.12.2.4.4.2,HP-SN-OSPF-GROUP-MIB::snOspfIf2Table,,not-accessible,,mandatory,,The OSPF Interface Table describes the interfaces from the viewpoint of OSPF.
.1.3.6.1.4.1.11.2.3.7.11.12.2.4.4.2.1,HP-SN-OSPF-GROUP-MIB::snOspfIf2Entry,,not-accessible,snOspfIf2Port,mandatory,,The OSPF Interface Entry describes one interface from the viewpoint of OSPF.
.1.3.6.1.4.1.11.2.3.7.11.12.2.4.4.2.1.1,HP-SN-OSPF-GROUP-MIB::snOspfIf2Port,INTEGER,read-only,,mandatory,,The physical router port of this OSPF interface.
.1.3.6.1.4.1.11.2.3.7.11.12.2.4.4.2.1.2,HP-SN-OSPF-GROUP-MIB::snOspfIf2AreaId,IpAddress,read-write,,mandatory,,A 32-bit integer uniquely identifying the area to which the interface connects. Area ID 0.0.0.0 is used for the OSPF backbone.
.1.3.6.1.4.1.11.2.3.7.11.12.2.4.4.2.1.3,HP-SN-OSPF-GROUP-MIB::snOspfIf2AdminStat,INTEGER,read-write,,mandatory,disabled(0):enabled(1),The OSPF interface's administrative status. The value 'enabled' denotes that neighbor relationships may be formed on the interface, and the interface will be advertised as an internal route to some area. The value 'disabled' denotes that the interface is external to OSPF.
.1.3.6.1.4.1.11.2.3.7.11.12.2.4.4.2.1.4,HP-SN-OSPF-GROUP-MIB::snOspfIf2RtrPriority,INTEGER,read-write,,mandatory,,The priority of this interface. Used in multi-access networks, this field is used in the designated router election algorithm. The value 0 signifies that the router is not eligible to become the designated router on this particular network. In the event of a tie in this value, routers will use their router id as a tie breaker.
.1.3.6.1.4.1.11.2.3.7.11.12.2.4.4.2.1.5,HP-SN-OSPF-GROUP-MIB::snOspfIf2TransitDelay,INTEGER,read-write,,mandatory,,The estimated number of seconds it takes to transmit a link- state update packet over this interface.
.1.3.6.1.4.1.11.2.3.7.11.12.2.4.4.2.1.6,HP-SN-OSPF-GROUP-MIB::snOspfIf2RetransInterval,INTEGER,read-write,,mandatory,,The number of seconds between link-state advertisement retransmissions, for adjacencies belonging to this interface. This value is also used when retransmitting database description and link-state request packets.
.1.3.6.1.4.1.11.2.3.7.11.12.2.4.4.2.1.7,HP-SN-OSPF-GROUP-MIB::snOspfIf2HelloInterval,INTEGER,read-write,,mandatory,,The length of time, in seconds, between the Hello packets that the router sends on the interface. This value must be the same for all routers attached to a common network.
.1.3.6.1.4.1.11.2.3.7.11.12.2.4.4.2.1.8,HP-SN-OSPF-GROUP-MIB::snOspfIf2RtrDeadInterval,INTEGER,read-write,,mandatory,,The number of seconds that a router's Hello packets have not been seen before it's neighbors declare the router down. This should be some multiple of the Hello interval. This value must be the same for all routers attached to a common network.
.1.3.6.1.4.1.11.2.3.7.11.12.2.4.4.2.1.9,HP-SN-OSPF-GROUP-MIB::snOspfIf2AuthType,INTEGER,read-write,,mandatory,,The authentication type specified for an interface. Additional authentication types may be assigned locally on a per interface basis.
.1.3.6.1.4.1.11.2.3.7.11.12.2.4.4.2.1.10,HP-SN-OSPF-GROUP-MIB::snOspfIf2AuthKey,OCTET,read-write,,mandatory,,The Authentication Key. If the Area's Authorization Type is simplePassword, and the key length is shorter than 8 octets, the agent will left adjust and zero fill to 8 octets. When read, snOspfIf2AuthKey always returns an Octet String of length zero.
.1.3.6.1.4.1.11.2.3.7.11.12.2.4.4.2.1.11,HP-SN-OSPF-GROUP-MIB::snOspfIf2MetricValue,INTEGER,read-write,,mandatory,,The metric of using this type of service on this interface. The default value of the TOS 0 Metric is 10^8 / ifSpeed.
.1.3.6.1.4.1.11.2.3.7.11.12.2.4.4.2.1.12,HP-SN-OSPF-GROUP-MIB::snOspfIf2RowStatus,INTEGER,read-write,,mandatory,invalid(1):valid(2):delete(3):create(4):modify(5),This object is used to create and rendering it inoperative..
.1.3.6.1.4.1.11.2.3.7.11.12.2.4.4.2.1.13,HP-SN-OSPF-GROUP-MIB::snOspfIf2Md5AuthKeyId,INTEGER,read-write,,mandatory,,The md5 authentication key ID. If the snOspfVirtIfAuthType is set to md5, the value of snOspfIf2Md5AuthKeyId must be (1 to 255). This field identifies the algorithm and secret  key used to create the message digest appended to the OSPF  packet. Key Identifiers are unique per-interface  (or equivalently, per-subnet).
.1.3.6.1.4.1.11.2.3.7.11.12.2.4.4.2.1.14,HP-SN-OSPF-GROUP-MIB::snOspfIf2Md5AuthKey,OCTET,read-write,,mandatory,,The MD5 Authentication Key. If the Area's Authorization Type is md5, and the key length is shorter than 16 octets,  the agent will left adjust and zero fill to 16 octets. When read, snOspfIf2Md5AuthKey always returns an Octet String of length zero.
.1.3.6.1.4.1.11.2.3.7.11.12.2.4.4.2.1.15,HP-SN-OSPF-GROUP-MIB::snOspfIf2Md5ActivationWaitTime,INTEGER,read-write,,mandatory,,The md5 authentication key activation wait time is specified in second and the maximum wait time is 14400 seconds (4 hours).
.1.3.6.1.4.1.11.2.3.7.11.12.2.4.4.2.1.16,HP-SN-OSPF-GROUP-MIB::snOspfIf2AreaIdFormat,INTEGER,read-only,,mandatory,integer(0):ipAddress(1),This object is used to specify whether
.1.3.6.1.4.1.11.2.3.7.11.12.2.4.4.2.1.17,HP-SN-OSPF-GROUP-MIB::snOspfIf2PassiveMode,INTEGER,read-write,,mandatory,disabled(0):enabled(1),This object control the passive mode of this interface.
.1.3.6.1.4.1.11.2.3.7.11.12.2.4.4.2.1.18,HP-SN-OSPF-GROUP-MIB::snOspfIf2DatabaseFilterAllOut,INTEGER,read-write,,mandatory,disabled(0):enabled(1),This object control the filtering of outgoing OSPF LSA on this interface.
.1.3.6.1.4.1.11.2.3.7.11.12.2.4.4.2.1.19,HP-SN-OSPF-GROUP-MIB::snOspfIf2MtuIgnore,INTEGER,read-write,,mandatory,disabled(0):enabled(1),This object control MTU detection mode of this interface.
.1.3.6.1.4.1.11.2.3.7.11.12.2.4.4.2.1.20,HP-SN-OSPF-GROUP-MIB::snOspfIf2NetworkP2mp,INTEGER,read-write,,mandatory,disabled(0):enabled(1),This object enable/disable P2MP mode of this interface.
.1.3.6.1.4.1.11.2.3.7.11.12.2.4.5,HP-SN-OSPF-GROUP-MIB::snOspfVirtIf,,,,,,
.1.3.6.1.4.1.11.2.3.7.11.12.2.4.5.1,HP-SN-OSPF-GROUP-MIB::snOspfVirtIfTable,,not-accessible,,mandatory,,Information about this router's virtual interfaces.
.1.3.6.1.4.1.11.2.3.7.11.12.2.4.5.1.1,HP-SN-OSPF-GROUP-MIB::snOspfVirtIfEntry,,not-accessible,snOspfVirtIfAreaID:snOspfVirtIfNeighbor,mandatory,,Information about a single Virtual Interface.
.1.3.6.1.4.1.11.2.3.7.11.12.2.4.5.1.1.1,HP-SN-OSPF-GROUP-MIB::snOspfVirtIfAreaID,IpAddress,read-only,,mandatory,,The Transit Area that the Virtual Link traverses. By definition, this is not 0.0.0.0
.1.3.6.1.4.1.11.2.3.7.11.12.2.4.5.1.1.2,HP-SN-OSPF-GROUP-MIB::snOspfVirtIfNeighbor,IpAddress,read-only,,mandatory,,The Router ID of the Virtual Neighbor.
.1.3.6.1.4.1.11.2.3.7.11.12.2.4.5.1.1.3,HP-SN-OSPF-GROUP-MIB::snOspfVirtIfTransitDelay,INTEGER,read-write,,mandatory,,The estimated number of seconds it takes to transmit a link- state update packet over this interface.
.1.3.6.1.4.1.11.2.3.7.11.12.2.4.5.1.1.4,HP-SN-OSPF-GROUP-MIB::snOspfVirtIfRetransInterval,INTEGER,read-write,,mandatory,,The number of seconds between link-state advertisement retransmissions, for adjacencies belonging to this interface. This value is also used when retransmitting database description and link-state request packets. This value should be well over the expected round-trip time.
.1.3.6.1.4.1.11.2.3.7.11.12.2.4.5.1.1.5,HP-SN-OSPF-GROUP-MIB::snOspfVirtIfHelloInterval,INTEGER,read-write,,mandatory,,The length of time, in seconds, between the Hello packets that the router sends on the interface. This value must be the same for the virtual neighbor.
.1.3.6.1.4.1.11.2.3.7.11.12.2.4.5.1.1.6,HP-SN-OSPF-GROUP-MIB::snOspfVirtIfRtrDeadInterval,INTEGER,read-write,,mandatory,,The number of seconds that a router's Hello packets have not been seen before it's neighbors declare the router down. This should be some multiple of the Hello interval. This value must be the same for the virtual neighbor.
.1.3.6.1.4.1.11.2.3.7.11.12.2.4.5.1.1.7,HP-SN-OSPF-GROUP-MIB::snOspfVirtIfAuthType,INTEGER,read-write,,mandatory,,The authentication type specified for an interface. Additional authentication types may be assigned locally on a per interface basis.
.1.3.6.1.4.1.11.2.3.7.11.12.2.4.5.1.1.8,HP-SN-OSPF-GROUP-MIB::snOspfVirtIfAuthKey,OCTET,read-write,,mandatory,,If Authentication Type is simplePassword, the device will left adjust and zero fill to 8 octets. When read, snOspfVifAuthKey always returns a string of length zero.
.1.3.6.1.4.1.11.2.3.7.11.12.2.4.5.1.1.9,HP-SN-OSPF-GROUP-MIB::snOspfVirtIfRowStatus,INTEGER,read-write,,mandatory,invalid(1):valid(2):delete(3):create(4):modify(5),This object is used to create and rendering it inoperative..
.1.3.6.1.4.1.11.2.3.7.11.12.2.4.5.1.1.10,HP-SN-OSPF-GROUP-MIB::snOspfVirtIfMd5AuthKeyId,INTEGER,read-write,,mandatory,,The md5 authentication key ID. If the snOspfVirtIfAuthType is set to md5, the value of snOspfVirtIfMd5AuthKeyId must be (1 to 255). This field identifies the algorithm and secret  key used to create the message digest appended to the OSPF  packet. Key Identifiers are unique per-interface  (or equivalently, per-subnet).
.1.3.6.1.4.1.11.2.3.7.11.12.2.4.5.1.1.11,HP-SN-OSPF-GROUP-MIB::snOspfVirtIfMd5AuthKey,OCTET,read-write,,mandatory,,The MD5 Authentication Key. If the Area's Authorization Type is md5, and the key length is shorter than 16 octets,  the agent will left adjust and zero fill to 16 octets. When read, snOspfIfMd5AuthKey always returns an Octet String of length zero.
.1.3.6.1.4.1.11.2.3.7.11.12.2.4.5.1.1.12,HP-SN-OSPF-GROUP-MIB::snOspfVirtIfMd5ActivationWaitTime,INTEGER,read-write,,mandatory,,The md5 authentication key activation wait time is specified in second and the maximum wait time is 14400 seconds (4 hours).
.1.3.6.1.4.1.11.2.3.7.11.12.2.4.5.1.1.13,HP-SN-OSPF-GROUP-MIB::snOspfVirtIfAreaIdFormat,INTEGER,read-only,,mandatory,integer(0):ipAddress(1),This object is used to specify whether
.1.3.6.1.4.1.11.2.3.7.11.12.2.4.6,HP-SN-OSPF-GROUP-MIB::snOspfRedis,,,,,,
.1.3.6.1.4.1.11.2.3.7.11.12.2.4.6.1,HP-SN-OSPF-GROUP-MIB::snOspfRedisTable,,not-accessible,,mandatory,,The OSPF Redistribution Table contains a list of routes that could be imported into the OSPF domain.
.1.3.6.1.4.1.11.2.3.7.11.12.2.4.6.1.1,HP-SN-OSPF-GROUP-MIB::snOspfRedisEntry,,not-accessible,snOspfRedisIndex,mandatory,,The OSPF Redistribution Entry specifies a particular RIP  or Static route to be imported into the OSPF domain.
.1.3.6.1.4.1.11.2.3.7.11.12.2.4.6.1.1.1,HP-SN-OSPF-GROUP-MIB::snOspfRedisIndex,INTEGER,read-only,,mandatory,,The destination IP address that associates with  this particular route.
.1.3.6.1.4.1.11.2.3.7.11.12.2.4.6.1.1.2,HP-SN-OSPF-GROUP-MIB::snOspfRedisIpAddress,IpAddress,read-write,,mandatory,,The destination IP address that associates with  this particular route.
.1.3.6.1.4.1.11.2.3.7.11.12.2.4.6.1.1.3,HP-SN-OSPF-GROUP-MIB::snOspfRedisMask,IpAddress,read-write,,mandatory,,The Subnet Mask that pertains to this route.
.1.3.6.1.4.1.11.2.3.7.11.12.2.4.6.1.1.4,HP-SN-OSPF-GROUP-MIB::snOspfRedisAction,INTEGER,read-write,,mandatory,noImport(0):import(1),The action to be taken if the route match this entry.  noImport(0): - the route is NOT imported into OSPF Domain.  import(1): - the route is imported into OSPF Domain as external type 2 route.
.1.3.6.1.4.1.11.2.3.7.11.12.2.4.6.1.1.5,HP-SN-OSPF-GROUP-MIB::snOspfRedisProtocol,INTEGER,read-write,,mandatory,rip(1):all(2):static(3):bgp(4):connected(5):isis(6),The imported routes into OSPF domain is set in the following:  rip(1): - the RIP route. all(2): - all protocol route. static(3): - the static route. bgp(4): - the BGP route. connected(5): - the connected route. isis(6): - the ISIS route.
.1.3.6.1.4.1.11.2.3.7.11.12.2.4.6.1.1.6,HP-SN-OSPF-GROUP-MIB::snOspfRedisSetOspfMetric,INTEGER,read-write,,mandatory,disabled(0):enabled(1),The value indicates to which the route metric should match:  disabled(0): - the route metric does NOT match the  OSPF metric field. enabled(1): - the route metric matches the OSPF  metric field.
.1.3.6.1.4.1.11.2.3.7.11.12.2.4.6.1.1.7,HP-SN-OSPF-GROUP-MIB::snOspfRedisOspfMetricValue,INTEGER,read-write,,mandatory,,The metric of using OSPF Metric value on this route.
.1.3.6.1.4.1.11.2.3.7.11.12.2.4.6.1.1.8,HP-SN-OSPF-GROUP-MIB::snOspfRedisMatchRipMetric,INTEGER,read-write,,mandatory,disabled(0):enabled(1),The value indicates to which the route metric should match:  disabled(0): - the route metric does NOT match the  RIP metric field. enabled(1): - the route metric matches the RIP  metric field.
.1.3.6.1.4.1.11.2.3.7.11.12.2.4.6.1.1.9,HP-SN-OSPF-GROUP-MIB::snOspfRedisRipMetricValue,INTEGER,read-write,,mandatory,,The metric of using RIP Metric value (1 to 15 hops) on this route.
.1.3.6.1.4.1.11.2.3.7.11.12.2.4.6.1.1.10,HP-SN-OSPF-GROUP-MIB::snOspfRedisRowStatus,INTEGER,read-write,,mandatory,invalid(1):valid(2):delete(3):create(4):modify(5),This object is used to create and rendering it inoperative..
.1.3.6.1.4.1.11.2.3.7.11.12.2.4.7,HP-SN-OSPF-GROUP-MIB::snOspfNbr,,,,,,
.1.3.6.1.4.1.11.2.3.7.11.12.2.4.7.1,HP-SN-OSPF-GROUP-MIB::snOspfNbrTable,,not-accessible,,mandatory,,A table of non-virtual neighbor information.
.1.3.6.1.4.1.11.2.3.7.11.12.2.4.7.1.1,HP-SN-OSPF-GROUP-MIB::snOspfNbrEntry,,not-accessible,snOspfNbrEntryIndex,mandatory,,The information regarding a single neighbor.
.1.3.6.1.4.1.11.2.3.7.11.12.2.4.7.1.1.1,HP-SN-OSPF-GROUP-MIB::snOspfNbrEntryIndex,INTEGER,read-only,,mandatory,,The table entry index of this neighbor.
.1.3.6.1.4.1.11.2.3.7.11.12.2.4.7.1.1.2,HP-SN-OSPF-GROUP-MIB::snOspfNbrPort,INTEGER,read-only,,mandatory,,The physical port of this neighbor.
.1.3.6.1.4.1.11.2.3.7.11.12.2.4.7.1.1.3,HP-SN-OSPF-GROUP-MIB::snOspfNbrIpAddr,IpAddress,read-only,,mandatory,,The IP address of this neighbor.
.1.3.6.1.4.1.11.2.3.7.11.12.2.4.7.1.1.4,HP-SN-OSPF-GROUP-MIB::snOspfNbrIndex,INTEGER,read-only,,mandatory,,The neighbor index of each port and each IP address.
.1.3.6.1.4.1.11.2.3.7.11.12.2.4.7.1.1.5,HP-SN-OSPF-GROUP-MIB::snOspfNbrRtrId,IpAddress,read-only,,mandatory,,A 32-bit integer (represented as a type IpAddress) uniquely identifying the neighboring router in the Autonomous System.
.1.3.6.1.4.1.11.2.3.7.11.12.2.4.7.1.1.6,HP-SN-OSPF-GROUP-MIB::snOspfNbrOptions,INTEGER,read-only,,mandatory,,A Bit Mask corresponding to the neighbor's op- tions field. Bit 0, if set, indicates that the system will operate on Type of Service metrics other than TOS 0. If zero, the neighbor will ignore all metrics except the TOS 0 metric. Bit 1, if set, indicates that the associated area accepts and operates on external informa- tion; if zero, it is a stub area. Bit 2, if set, indicates that the system is ca- pable of routing IP Multicast datagrams; i.e., that it implements the Multicast Extensions to OSPF. Bit 3, if set, indicates that the associated area is an NSSA. These areas are capable of carrying type 7 external advertisements, which are translated into type 5 external advertise- ments at NSSA borders.
.1.3.6.1.4.1.11.2.3.7.11.12.2.4.7.1.1.7,HP-SN-OSPF-GROUP-MIB::snOspfNbrPriority,INTEGER,read-only,,mandatory,,The priority of this neighbor in the designat- ed router election algorithm. The value 0 sig- nifies that the neighbor is not eligible to be- come the designated router on this particular network.
.1.3.6.1.4.1.11.2.3.7.11.12.2.4.7.1.1.8,HP-SN-OSPF-GROUP-MIB::snOspfNbrState,INTEGER,read-only,,mandatory,down(1):attempt(2):init(3):twoWay(4):exchangeStart(5):exchange(6):loading(7):full(8),The State of the relationship with this Neigh- bor.
.1.3.6.1.4.1.11.2.3.7.11.12.2.4.7.1.1.9,HP-SN-OSPF-GROUP-MIB::snOspfNbrEvents,Counter32,read-only,,mandatory,,The number of times this neighbor relationship has changed state, or an error has occurred.
.1.3.6.1.4.1.11.2.3.7.11.12.2.4.7.1.1.10,HP-SN-OSPF-GROUP-MIB::snOspfNbrLsRetransQLen,Gauge32,read-only,,mandatory,,The current length of the retransmission queue.
.1.3.6.1.4.1.11.2.3.7.11.12.2.4.8,HP-SN-OSPF-GROUP-MIB::snOspfVirtNbr,,,,,,
.1.3.6.1.4.1.11.2.3.7.11.12.2.4.8.1,HP-SN-OSPF-GROUP-MIB::snOspfVirtNbrTable,,not-accessible,,mandatory,,A table of virtual neighbor information.
.1.3.6.1.4.1.11.2.3.7.11.12.2.4.8.1.1,HP-SN-OSPF-GROUP-MIB::snOspfVirtNbrEntry,,not-accessible,snOspfVirtNbrEntryIndex,mandatory,,Virtual neighbor information.
.1.3.6.1.4.1.11.2.3.7.11.12.2.4.8.1.1.1,HP-SN-OSPF-GROUP-MIB::snOspfVirtNbrEntryIndex,INTEGER,read-only,,mandatory,,The table entry index of this virtual neighbor.
.1.3.6.1.4.1.11.2.3.7.11.12.2.4.8.1.1.2,HP-SN-OSPF-GROUP-MIB::snOspfVirtNbrArea,IpAddress,read-only,,mandatory,,The Transit Area Identifier.
.1.3.6.1.4.1.11.2.3.7.11.12.2.4.8.1.1.3,HP-SN-OSPF-GROUP-MIB::snOspfVirtNbrRtrId,IpAddress,read-only,,mandatory,,A 32-bit integer uniquely identifying the neighboring router in the Autonomous System.
.1.3.6.1.4.1.11.2.3.7.11.12.2.4.8.1.1.4,HP-SN-OSPF-GROUP-MIB::snOspfVirtNbrIpAddr,IpAddress,read-only,,mandatory,,The IP address this Virtual Neighbor is using.
.1.3.6.1.4.1.11.2.3.7.11.12.2.4.8.1.1.5,HP-SN-OSPF-GROUP-MIB::snOspfVirtNbrOptions,INTEGER,read-only,,mandatory,,A bit map corresponding to the neighbor's options field. Thus, Bit 1, if set, indicates that the neighbor supports Type of Service Routing; if zero, no metrics other than TOS 0 are in use by the neighbor.
.1.3.6.1.4.1.11.2.3.7.11.12.2.4.8.1.1.6,HP-SN-OSPF-GROUP-MIB::snOspfVirtNbrState,INTEGER,read-only,,mandatory,down(1):attempt(2):init(3):twoWay(4):exchangeStart(5):exchange(6):loading(7):full(8),The state of the Virtual Neighbor Relationship.
.1.3.6.1.4.1.11.2.3.7.11.12.2.4.8.1.1.7,HP-SN-OSPF-GROUP-MIB::snOspfVirtNbrEvents,Counter32,read-only,,mandatory,,The number of times this virtual link has changed its state, or an error has occurred.
.1.3.6.1.4.1.11.2.3.7.11.12.2.4.8.1.1.8,HP-SN-OSPF-GROUP-MIB::snOspfVirtNbrLSRetransQLen,Gauge32,read-only,,mandatory,,The current length of the retransmission queue.
.1.3.6.1.4.1.11.2.3.7.11.12.2.4.8.1.1.9,HP-SN-OSPF-GROUP-MIB::snOspfVirtNbrAreaIdFormat,INTEGER,read-only,,mandatory,integer(0):ipAddress(1),This object is used to specify whether
.1.3.6.1.4.1.11.2.3.7.11.12.2.4.9,HP-SN-OSPF-GROUP-MIB::snOspfLsdb,,,,,,
.1.3.6.1.4.1.11.2.3.7.11.12.2.4.9.1,HP-SN-OSPF-GROUP-MIB::snOspfLsdbTable,,not-accessible,,mandatory,,The OSPF Process's Links State Database.
.1.3.6.1.4.1.11.2.3.7.11.12.2.4.9.1.1,HP-SN-OSPF-GROUP-MIB::snOspfLsdbEntry,,not-accessible,snOspfLsdbEntryIndex,mandatory,,A single Link State Advertisement.
.1.3.6.1.4.1.11.2.3.7.11.12.2.4.9.1.1.1,HP-SN-OSPF-GROUP-MIB::snOspfLsdbEntryIndex,INTEGER,read-only,,mandatory,,The table entry index of this Link State Database.
.1.3.6.1.4.1.11.2.3.7.11.12.2.4.9.1.1.2,HP-SN-OSPF-GROUP-MIB::snOspfLsdbAreaId,IpAddress,read-only,,mandatory,,The 32 bit identifier of the Area from which the LSA was received.
.1.3.6.1.4.1.11.2.3.7.11.12.2.4.9.1.1.3,HP-SN-OSPF-GROUP-MIB::snOspfLsdbType,INTEGER,read-only,,mandatory,routerLink(1):networkLink(2):summaryLink(3):asSummaryLink(4):asExternalLink(5):multicastLink(6):nssaExternalLink(7):opaqueLink(9):opaqueAreaLink(10):opaqueAsLink(11),The type of the link state advertisement. Each link state type has a separate advertisement format.
.1.3.6.1.4.1.11.2.3.7.11.12.2.4.9.1.1.4,HP-SN-OSPF-GROUP-MIB::snOspfLsdbLsId,IpAddress,read-only,,mandatory,,The Link State ID is an LS Type Specific field containing either a Router ID or an IP Address; it identifies the piece of the routing domain that is being described by the advertisement.
.1.3.6.1.4.1.11.2.3.7.11.12.2.4.9.1.1.5,HP-SN-OSPF-GROUP-MIB::snOspfLsdbRouterId,IpAddress,read-only,,mandatory,,The 32 bit number that uniquely identifies the originating router in the Autonomous System.
.1.3.6.1.4.1.11.2.3.7.11.12.2.4.9.1.1.6,HP-SN-OSPF-GROUP-MIB::snOspfLsdbSequence,INTEGER,read-only,,mandatory,,The sequence number field is a signed 32-bit integer. It is used to detect old and duplicate link state advertisements. The space of sequence numbers is linearly ordered. The larger the sequence number the more recent the advertisement.
.1.3.6.1.4.1.11.2.3.7.11.12.2.4.9.1.1.7,HP-SN-OSPF-GROUP-MIB::snOspfLsdbAge,INTEGER,read-only,,mandatory,,This field is the age of the link state advertisement in seconds.
.1.3.6.1.4.1.11.2.3.7.11.12.2.4.9.1.1.8,HP-SN-OSPF-GROUP-MIB::snOspfLsdbChecksum,INTEGER,read-only,,mandatory,,This field is the checksum of the complete contents of the advertisement, excepting the age field. The age field is excepted so that an advertisement's age can be incremented without updating the checksum. The checksum used is the same that is used for ISO connectionless datagrams; it is commonly referred to as the Fletcher checksum.
.1.3.6.1.4.1.11.2.3.7.11.12.2.4.9.1.1.9,HP-SN-OSPF-GROUP-MIB::snOspfLsdbAdvertisement,OCTET,read-only,,mandatory,,The entire Link State Advertisement, including its header.
.1.3.6.1.4.1.11.2.3.7.11.12.2.4.9.1.1.10,HP-SN-OSPF-GROUP-MIB::snOspfLsdbAreaIdFormat,INTEGER,read-only,,mandatory,integer(0):ipAddress(1),This object is used to specify whether
.1.3.6.1.4.1.11.2.3.7.11.12.2.4.10,HP-SN-OSPF-GROUP-MIB::snOspfExtLsdb,,,,,,
.1.3.6.1.4.1.11.2.3.7.11.12.2.4.10.1,HP-SN-OSPF-GROUP-MIB::snOspfExtLsdbTable,,not-accessible,,mandatory,,The OSPF Process's Links State Database.
.1.3.6.1.4.1.11.2.3.7.11.12.2.4.10.1.1,HP-SN-OSPF-GROUP-MIB::snOspfExtLsdbEntry,,not-accessible,snOspfExtLsdbEntryIndex,mandatory,,A single Link State Advertisement.
.1.3.6.1.4.1.11.2.3.7.11.12.2.4.10.1.1.1,HP-SN-OSPF-GROUP-MIB::snOspfExtLsdbEntryIndex,INTEGER,read-only,,mandatory,,The table entry index of this Link State Database.
.1.3.6.1.4.1.11.2.3.7.11.12.2.4.10.1.1.2,HP-SN-OSPF-GROUP-MIB::snOspfExtLsdbType,INTEGER,read-only,,mandatory,asExternalLink(5),The type of the link state advertisement. Each link state type has a separate advertise- ment format.
.1.3.6.1.4.1.11.2.3.7.11.12.2.4.10.1.1.3,HP-SN-OSPF-GROUP-MIB::snOspfExtLsdbLsId,IpAddress,read-only,,mandatory,,The Link State ID is an LS Type Specific field containing either a Router ID or an IP Address; it identifies the piece of the routing domain that is being described by the advertisement.
.1.3.6.1.4.1.11.2.3.7.11.12.2.4.10.1.1.4,HP-SN-OSPF-GROUP-MIB::snOspfExtLsdbRouterId,IpAddress,read-only,,mandatory,,The 32 bit number that uniquely identifies the originating router in the Autonomous System.
.1.3.6.1.4.1.11.2.3.7.11.12.2.4.10.1.1.5,HP-SN-OSPF-GROUP-MIB::snOspfExtLsdbSequence,INTEGER,read-only,,mandatory,,The sequence number field is a signed 32-bit integer. It is used to detect old and dupli- cate link state advertisements. The space of sequence numbers is linearly ordered. The larger the sequence number the more recent the advertisement.
.1.3.6.1.4.1.11.2.3.7.11.12.2.4.10.1.1.6,HP-SN-OSPF-GROUP-MIB::snOspfExtLsdbAge,INTEGER,read-only,,mandatory,,This field is the age of the link state adver- tisement in seconds.
.1.3.6.1.4.1.11.2.3.7.11.12.2.4.10.1.1.7,HP-SN-OSPF-GROUP-MIB::snOspfExtLsdbChecksum,INTEGER,read-only,,mandatory,,This field is the checksum of the complete contents of the advertisement, excepting the age field. The age field is excepted so that an advertisement's age can be incremented without updating the checksum. The checksum used is the same that is used for ISO connec- tionless datagrams; it is commonly referred to as the Fletcher checksum.
.1.3.6.1.4.1.11.2.3.7.11.12.2.4.10.1.1.8,HP-SN-OSPF-GROUP-MIB::snOspfExtLsdbAdvertisement,OCTET,read-only,,mandatory,,The entire Link State Advertisement, including its header.
.1.3.6.1.4.1.11.2.3.7.11.12.2.4.11,HP-SN-OSPF-GROUP-MIB::snOspfAreaStatus,,,,,,
.1.3.6.1.4.1.11.2.3.7.11.12.2.4.11.1,HP-SN-OSPF-GROUP-MIB::snOspfAreaStatusTable,,not-accessible,,mandatory,,Information describing the configured parameters and cumulative statistics of the router's attached areas.
.1.3.6.1.4.1.11.2.3.7.11.12.2.4.11.1.1,HP-SN-OSPF-GROUP-MIB::snOspfAreaStatusEntry,,not-accessible,snOspfAreaStatusEntryIndex,mandatory,,Information describing the configured parameters and cumulative statistics of one of the router's attached areas.
.1.3.6.1.4.1.11.2.3.7.11.12.2.4.11.1.1.1,HP-SN-OSPF-GROUP-MIB::snOspfAreaStatusEntryIndex,INTEGER,read-only,,mandatory,,The table entry index of this Area.
.1.3.6.1.4.1.11.2.3.7.11.12.2.4.11.1.1.2,HP-SN-OSPF-GROUP-MIB::snOspfAreaStatusAreaId,IpAddress,read-only,,mandatory,,A 32-bit integer uniquely identifying an area. Area ID 0.0.0.0 is used for the OSPF backbone.
.1.3.6.1.4.1.11.2.3.7.11.12.2.4.11.1.1.3,HP-SN-OSPF-GROUP-MIB::snOspfAreaStatusImportASExtern,INTEGER,read-only,,mandatory,,The area's support for importing AS external link- state advertisements.
.1.3.6.1.4.1.11.2.3.7.11.12.2.4.11.1.1.4,HP-SN-OSPF-GROUP-MIB::snOspfAreaStatusStubMetric,INTEGER,read-only,,mandatory,,The metric value applied at the default type of service(ospfMetric). By default, this equals the  least metric at the type of service among the  interfaces to other areas. This Object exist if only if the value of snOspfAreaSummary is  snOspfAreaSummary(2); Otherwise, an SNMP_GET/GET_NEXT  attempt of this Object will return NO_SUCH_NAME.
.1.3.6.1.4.1.11.2.3.7.11.12.2.4.11.1.1.5,HP-SN-OSPF-GROUP-MIB::snOspfAreaStatusSpfRuns,Counter32,read-only,,mandatory,,The number of times that the intra-area route table has been calculated using this area's link-state database. This is typically done using Dijkstra's algorithm.
.1.3.6.1.4.1.11.2.3.7.11.12.2.4.11.1.1.6,HP-SN-OSPF-GROUP-MIB::snOspfAreaStatusAreaBdrRtrCount,Gauge32,read-only,,mandatory,,The total number of area border routers reachable within this area. This is initially zero, and is calculated in each SPF Pass.
.1.3.6.1.4.1.11.2.3.7.11.12.2.4.11.1.1.7,HP-SN-OSPF-GROUP-MIB::snOspfAreaStatusASBdrRtrCount,Gauge32,read-only,,mandatory,,The total number of Autonomous System border routers reachable within this area. This is initially zero, and is calculated in each SPF Pass.
.1.3.6.1.4.1.11.2.3.7.11.12.2.4.11.1.1.8,HP-SN-OSPF-GROUP-MIB::snOspfAreaStatusLSACount,Gauge32,read-only,,mandatory,,The total number of link-state advertisements in this area's link-state database, excluding AS External LSA's.
.1.3.6.1.4.1.11.2.3.7.11.12.2.4.11.1.1.9,HP-SN-OSPF-GROUP-MIB::snOspfAreaStatusLSACksumSum,INTEGER,read-only,,mandatory,,The 32-bit unsigned sum of the link-state advertisements' LS checksums contained in this area's link-state database. This sum excludes external (LS type 5) link-state advertisements. The sum can be used to determine if there has been a change in a router's link state database, and to compare the link-state database of two routers.
.1.3.6.1.4.1.11.2.3.7.11.12.2.4.11.1.1.10,HP-SN-OSPF-GROUP-MIB::snOspfAreaStatusAreaIdFormat,INTEGER,read-only,,mandatory,integer(0):ipAddress(1),This object is used to specify whether
.1.3.6.1.4.1.11.2.3.7.11.12.2.4.12,HP-SN-OSPF-GROUP-MIB::snOspfIfStatus,,,,,,
.1.3.6.1.4.1.11.2.3.7.11.12.2.4.12.1,HP-SN-OSPF-GROUP-MIB::snOspfIfStatusTable,,not-accessible,,mandatory,,The OSPF Interface Status Table describes the interfaces from the viewpoint of OSPF.
.1.3.6.1.4.1.11.2.3.7.11.12.2.4.12.1.1,HP-SN-OSPF-GROUP-MIB::snOspfIfStatusEntry,,not-accessible,snOspfIfStatusEntryIndex,mandatory,,The OSPF Interface Entry describes one interface from the viewpoint of OSPF.
.1.3.6.1.4.1.11.2.3.7.11.12.2.4.12.1.1.1,HP-SN-OSPF-GROUP-MIB::snOspfIfStatusEntryIndex,INTEGER,read-only,,mandatory,,The table entry index of this Area.
.1.3.6.1.4.1.11.2.3.7.11.12.2.4.12.1.1.2,HP-SN-OSPF-GROUP-MIB::snOspfIfStatusPort,INTEGER,read-only,,mandatory,,The physical router port of this OSPF interface.
.1.3.6.1.4.1.11.2.3.7.11.12.2.4.12.1.1.3,HP-SN-OSPF-GROUP-MIB::snOspfIfStatusIpAddress,IpAddress,read-only,,mandatory,,The IP address of this OSPF interface.
.1.3.6.1.4.1.11.2.3.7.11.12.2.4.12.1.1.4,HP-SN-OSPF-GROUP-MIB::snOspfIfStatusAreaId,IpAddress,read-only,,mandatory,,A 32-bit integer uniquely identifying the area to which the interface connects. Area ID 0.0.0.0 is used for the OSPF backbone.
.1.3.6.1.4.1.11.2.3.7.11.12.2.4.12.1.1.5,HP-SN-OSPF-GROUP-MIB::snOspfIfStatusType,INTEGER,read-only,,mandatory,broadcast(1):nbma(2):pointToPoint(3),The OSPF interface type. By way of a default, this field may be intuited from the corresponding value of ifType. Broadcast LANs, such as Ethernet and IEEE 802.5, take the value 'broadcast', X.25, Frame Relay, and similar technologies take the value 'nbma', and links that are definitively point to point take the value 'pointToPoint'.
.1.3.6.1.4.1.11.2.3.7.11.12.2.4.12.1.1.6,HP-SN-OSPF-GROUP-MIB::snOspfIfStatusAdminStat,INTEGER,read-only,,mandatory,disabled(0):enabled(1),The OSPF interface's administrative status. The value 'enabled' denotes that neighbor relationships may be formed on the interface, and the interface will be advertised as an internal route to some area. The value 'disabled' denotes that the interface is external to OSPF.
.1.3.6.1.4.1.11.2.3.7.11.12.2.4.12.1.1.7,HP-SN-OSPF-GROUP-MIB::snOspfIfStatusRtrPriority,INTEGER,read-only,,mandatory,,The priority of this interface. Used in multi-access networks, this field is used in the designated router election algorithm. The value 0 signifies that the router is not eligible to become the designated router on this particular network. In the event of a tie in this value, routers will use their router id as a tie breaker.
.1.3.6.1.4.1.11.2.3.7.11.12.2.4.12.1.1.8,HP-SN-OSPF-GROUP-MIB::snOspfIfStatusTransitDelay,INTEGER,read-only,,mandatory,,The estimated number of seconds it takes to transmit a link- state update packet over this interface.
.1.3.6.1.4.1.11.2.3.7.11.12.2.4.12.1.1.9,HP-SN-OSPF-GROUP-MIB::snOspfIfStatusRetransInterval,INTEGER,read-only,,mandatory,,The number of seconds between link-state advertisement retransmissions, for adjacencies belonging to this interface. This value is also used when retransmitting database description and link-state request packets.
.1.3.6.1.4.1.11.2.3.7.11.12.2.4.12.1.1.10,HP-SN-OSPF-GROUP-MIB::snOspfIfStatusHelloInterval,INTEGER,read-only,,mandatory,,The length of time, in seconds, between the Hello packets that the router sends on the interface. This value must be the same for all routers attached to a common network.
.1.3.6.1.4.1.11.2.3.7.11.12.2.4.12.1.1.11,HP-SN-OSPF-GROUP-MIB::snOspfIfStatusRtrDeadInterval,INTEGER,read-only,,mandatory,,The number of seconds that a router's Hello packets have not been seen before it's neighbors declare the router down. This should be some multiple of the Hello interval. This value must be the same for all routers attached to a common network.
.1.3.6.1.4.1.11.2.3.7.11.12.2.4.12.1.1.12,HP-SN-OSPF-GROUP-MIB::snOspfIfStatusState,INTEGER,read-only,,mandatory,down(1):loopback(2):waiting(3):pointToPoint(4):designatedRouter(5):backupDesignatedRouter(6):otherDesignatedRouter(7),The OSPF Interface State.
.1.3.6.1.4.1.11.2.3.7.11.12.2.4.12.1.1.13,HP-SN-OSPF-GROUP-MIB::snOspfIfStatusDesignatedRouter,IpAddress,read-only,,mandatory,,The IP Address of the Designated Router.
.1.3.6.1.4.1.11.2.3.7.11.12.2.4.12.1.1.14,HP-SN-OSPF-GROUP-MIB::snOspfIfStatusBackupDesignatedRouter,IpAddress,read-only,,mandatory,,The IP Address of the Backup Designated Router.
.1.3.6.1.4.1.11.2.3.7.11.12.2.4.12.1.1.15,HP-SN-OSPF-GROUP-MIB::snOspfIfStatusEvents,Counter32,read-only,,mandatory,,The number of times this OSPF interface has changed its state, or an error has occurred.
.1.3.6.1.4.1.11.2.3.7.11.12.2.4.12.1.1.16,HP-SN-OSPF-GROUP-MIB::snOspfIfStatusAuthType,INTEGER,read-only,,mandatory,,The authentication type specified for an interface. Additional authentication types may be assigned locally on a per interface basis.
.1.3.6.1.4.1.11.2.3.7.11.12.2.4.12.1.1.17,HP-SN-OSPF-GROUP-MIB::snOspfIfStatusAuthKey,OCTET,read-only,,mandatory,,The Authentication Key. If the Area's Authorization Type is simplePassword, and the key length is shorter than 8 octets, the agent will left adjust and zero fill to 8 octets. When read, snOspfIfStatusAuthKey always returns an Octet String of length zero.
.1.3.6.1.4.1.11.2.3.7.11.12.2.4.12.1.1.18,HP-SN-OSPF-GROUP-MIB::snOspfIfStatusMetricValue,INTEGER,read-only,,mandatory,,The metric of using this type of service on this interface. The default value of the TOS 0 Metric is 10^8 / ifSpeed.
.1.3.6.1.4.1.11.2.3.7.11.12.2.4.12.1.1.19,HP-SN-OSPF-GROUP-MIB::snOspfIfStatusMd5AuthKeyId,INTEGER,read-only,,mandatory,,The md5 authentication key ID. If the snOspfVirtIfAuthType is set to md5, the value of snOspfIfMd5AuthKeyId must be (1 to 255). This field identifies the algorithm and secret  key used to create the message digest appended to the OSPF  packet. Key Identifiers are unique per-interface  (or equivalently, per-subnet).
.1.3.6.1.4.1.11.2.3.7.11.12.2.4.12.1.1.20,HP-SN-OSPF-GROUP-MIB::snOspfIfStatusMd5AuthKey,OCTET,read-only,,mandatory,,The MD5 Authentication Key. If the Area's Authorization Type is md5, and the key length is shorter than 16 octets,  the agent will left adjust and zero fill to 16 octets. When read, snOspfIfMd5AuthKey always returns an Octet String of length zero.
.1.3.6.1.4.1.11.2.3.7.11.12.2.4.12.1.1.21,HP-SN-OSPF-GROUP-MIB::snOspfIfStatusMd5ActivationWaitTime,INTEGER,read-only,,mandatory,,The md5 authentication key activation wait time is specified in second and the maximum wait time is 14400 seconds (4 hours).
.1.3.6.1.4.1.11.2.3.7.11.12.2.4.12.1.1.22,HP-SN-OSPF-GROUP-MIB::snOspfIfStatusAreaIdFormat,INTEGER,read-only,,mandatory,integer(0):ipAddress(1),This object is used to specify whether
.1.3.6.1.4.1.11.2.3.7.11.12.2.4.13,HP-SN-OSPF-GROUP-MIB::snOspfVirtIfStatus,,,,,,
.1.3.6.1.4.1.11.2.3.7.11.12.2.4.13.1,HP-SN-OSPF-GROUP-MIB::snOspfVirtIfStatusTable,,not-accessible,,mandatory,,Information about this router's virtual interfaces.
.1.3.6.1.4.1.11.2.3.7.11.12.2.4.13.1.1,HP-SN-OSPF-GROUP-MIB::snOspfVirtIfStatusEntry,,not-accessible,snOspfVirtIfStatusEntryIndex,mandatory,,Information about a single Virtual Interface.
.1.3.6.1.4.1.11.2.3.7.11.12.2.4.13.1.1.1,HP-SN-OSPF-GROUP-MIB::snOspfVirtIfStatusEntryIndex,INTEGER,read-only,,mandatory,,The table entry index of this Area.
.1.3.6.1.4.1.11.2.3.7.11.12.2.4.13.1.1.2,HP-SN-OSPF-GROUP-MIB::snOspfVirtIfStatusAreaID,IpAddress,read-only,,mandatory,,The Transit Area that the Virtual Link traverses. By definition, this is not 0.0.0.0 
.1.3.6.1.4.1.11.2.3.7.11.12.2.4.13.1.1.3,HP-SN-OSPF-GROUP-MIB::snOspfVirtIfStatusNeighbor,IpAddress,read-only,,mandatory,,The Router ID of the Virtual Neighbor.
.1.3.6.1.4.1.11.2.3.7.11.12.2.4.13.1.1.4,HP-SN-OSPF-GROUP-MIB::snOspfVirtIfStatusTransitDelay,INTEGER,read-only,,mandatory,,The estimated number of seconds it takes to transmit a link- state update packet over this interface.
.1.3.6.1.4.1.11.2.3.7.11.12.2.4.13.1.1.5,HP-SN-OSPF-GROUP-MIB::snOspfVirtIfStatusRetransInterval,INTEGER,read-only,,mandatory,,The number of seconds between link-state advertisement retransmissions, for adjacencies belonging to this interface. This value is also used when retransmitting database description and link-state request packets. This value should be well over the expected round-trip time.
.1.3.6.1.4.1.11.2.3.7.11.12.2.4.13.1.1.6,HP-SN-OSPF-GROUP-MIB::snOspfVirtIfStatusHelloInterval,INTEGER,read-only,,mandatory,,The length of time, in seconds, between the Hello packets that the router sends on the interface. This value must be the same for the virtual neighbor.
.1.3.6.1.4.1.11.2.3.7.11.12.2.4.13.1.1.7,HP-SN-OSPF-GROUP-MIB::snOspfVirtIfStatusRtrDeadInterval,INTEGER,read-only,,mandatory,,The number of seconds that a router's Hello packets have not been seen before it's neighbors declare the router down. This should be some multiple of the Hello interval. This value must be the same for the virtual neighbor.
.1.3.6.1.4.1.11.2.3.7.11.12.2.4.13.1.1.8,HP-SN-OSPF-GROUP-MIB::snOspfVirtIfStatusState,INTEGER,read-only,,mandatory,down(1):pointToPoint(4),The OSPF virtual interfaces states.
.1.3.6.1.4.1.11.2.3.7.11.12.2.4.13.1.1.9,HP-SN-OSPF-GROUP-MIB::snOspfVirtIfStatusEvents,Counter32,read-only,,mandatory,,The number of state changes or error events on  this Virtual Link.
.1.3.6.1.4.1.11.2.3.7.11.12.2.4.13.1.1.10,HP-SN-OSPF-GROUP-MIB::snOspfVirtIfStatusAuthType,INTEGER,read-only,,mandatory,,The authentication type specified for an interface. Additional authentication types may be assigned locally on a per interface basis.
.1.3.6.1.4.1.11.2.3.7.11.12.2.4.13.1.1.11,HP-SN-OSPF-GROUP-MIB::snOspfVirtIfStatusAuthKey,OCTET,read-only,,mandatory,,If Authentication Type is simplePassword, the device will left adjust and zero fill to 8 octets. When read, snOspfVifAuthKey always returns a string of length zero.
.1.3.6.1.4.1.11.2.3.7.11.12.2.4.13.1.1.12,HP-SN-OSPF-GROUP-MIB::snOspfVirtIfStatusMd5AuthKeyId,INTEGER,read-only,,mandatory,,The md5 authentication key ID. If the snOspfVirtIfAuthType is set to md5, the value of snOspfVirtIfMd5AuthKeyId must be (1 to 255). This field identifies the algorithm and secret  key used to create the message digest appended to the OSPF  packet. Key Identifiers are unique per-interface  (or equivalently, per-subnet).
.1.3.6.1.4.1.11.2.3.7.11.12.2.4.13.1.1.13,HP-SN-OSPF-GROUP-MIB::snOspfVirtIfStatusMd5AuthKey,OCTET,read-only,,mandatory,,The MD5 Authentication Key. If the Area's Authorization Type is md5, and the key length is shorter than 16 octets,  the agent will left adjust and zero fill to 16 octets. When read, snOspfIfMd5AuthKey always returns an Octet String of length zero.
.1.3.6.1.4.1.11.2.3.7.11.12.2.4.13.1.1.14,HP-SN-OSPF-GROUP-MIB::snOspfVirtIfStatusMd5ActivationWaitTime,INTEGER,read-only,,mandatory,,The md5 authentication key activation wait time is specified in second and the maximum wait time is 14400 seconds (4 hours).
.1.3.6.1.4.1.11.2.3.7.11.12.2.4.13.1.1.15,HP-SN-OSPF-GROUP-MIB::snOspfVirtIfStatusAreaIdFormat,INTEGER,read-only,,mandatory,integer(0):ipAddress(1),This object is used to specify whether
.1.3.6.1.4.1.11.2.3.7.11.12.2.4.14,HP-SN-OSPF-GROUP-MIB::snOspfRoutingInfo,,,,,,
.1.3.6.1.4.1.11.2.3.7.11.12.2.4.14.1,HP-SN-OSPF-GROUP-MIB::snOspfRoutingInfoTable,,not-accessible,,mandatory,,Information about this router's routing information.
.1.3.6.1.4.1.11.2.3.7.11.12.2.4.14.1.1,HP-SN-OSPF-GROUP-MIB::snOspfRoutingInfoEntry,,not-accessible,snOspfRoutingInfoIndex,mandatory,,Information about a single ABR/ASBR Routing entry.
.1.3.6.1.4.1.11.2.3.7.11.12.2.4.14.1.1.1,HP-SN-OSPF-GROUP-MIB::snOspfRoutingInfoIndex,INTEGER,read-only,,mandatory,,The table entry index of this Routing entry.
.1.3.6.1.4.1.11.2.3.7.11.12.2.4.14.1.1.2,HP-SN-OSPF-GROUP-MIB::snOspfRoutingInfoRouterID,IpAddress,read-only,,mandatory,,The Router ID of the destination router.
.1.3.6.1.4.1.11.2.3.7.11.12.2.4.14.1.1.3,HP-SN-OSPF-GROUP-MIB::snOspfRoutingInfoRouterType,INTEGER,read-only,,mandatory,abr(1):asbr(2):abrANDasbr(3),The Router type of the destination router as the following: abr (1) -- area border router. asbr (2) -- autonomous sytem border router. abrANDasbr(3) -- area border and autonomous system border router.
.1.3.6.1.4.1.11.2.3.7.11.12.2.4.14.1.1.4,HP-SN-OSPF-GROUP-MIB::snOspfRoutingInfoNextHopRouterID,IpAddress,read-only,,mandatory,,The router ID of the next hop destination router.
.1.3.6.1.4.1.11.2.3.7.11.12.2.4.14.1.1.5,HP-SN-OSPF-GROUP-MIB::snOspfRoutingInfoOutgoingInterface,INTEGER,read-only,,mandatory,,The outgoing interface of the destination router.
.1.3.6.1.4.1.11.2.3.7.11.12.2.4.15,HP-SN-OSPF-GROUP-MIB::snOspfTrapControl,,,,,,
.1.3.6.1.4.1.11.2.3.7.11.12.2.4.15.1,HP-SN-OSPF-GROUP-MIB::snOspfSetTrap,OCTET,read-write,,mandatory,,A four-octet string serving as a bit map for
.1.3.6.1.4.1.11.2.3.7.11.12.2.4.15.2,HP-SN-OSPF-GROUP-MIB::snOspfConfigErrorType,INTEGER,read-only,,mandatory,badVersion(1):areaMismatch(2):unknownNbmaNbr(3):unknownVirtualNbr(4):authTypeMismatch(5):authFailure(6):netMaskMismatch(7):helloIntervalMismatch(8):deadIntervalMismatch(9):optionMismatch(10),Potential types of configuration conflicts.
.1.3.6.1.4.1.11.2.3.7.11.12.2.4.15.3,HP-SN-OSPF-GROUP-MIB::snOspfPacketType,INTEGER,read-only,,mandatory,hello(1):dbDescript(2):lsReq(3):lsUpdate(4):lsAck(5),OSPF packet types.
.1.3.6.1.4.1.11.2.3.7.11.12.2.4.15.4,HP-SN-OSPF-GROUP-MIB::snOspfPacketSrc,IpAddress,read-only,,mandatory,,The IP address of an inbound packet that can-
.1.3.6.1.4.1.11.2.3.7.11.12.2.4.15.5,HP-SN-OSPF-GROUP-MIB::snOspfTrapsGenerationMode,INTEGER,read-write,,mandatory,disabled(0):enabled(1),Indicates if the generation of any OSPF traps is permitted on the router.  router; 'disabled' denotes that the OSPF Traps can not be generated by the router even when snOspfSetTrap indicates the generation of specific OSPF Traps. This object provides global control on the generation of ospf traps.
.1.3.6.1.4.1.11.2.3.7.11.12.2.5,HP-SN-ROOT-MIB::snDvmrp,,,,,,
.1.3.6.1.4.1.11.2.3.7.11.12.2.5.1,HP-SN-IP-MIB::snDvmrpMIBObjects,,,,,,
.1.3.6.1.4.1.11.2.3.7.11.12.2.5.1.1,HP-SN-IP-MIB::snDvmrpVersion,OCTET,read-only,,mandatory,,The router's DVMRP version information.
.1.3.6.1.4.1.11.2.3.7.11.12.2.5.1.2,HP-SN-IP-MIB::snDvmrpEnable,INTEGER,read-write,,mandatory,disabled(0):enabled(1),Enable or disable DVMRP on this router.
.1.3.6.1.4.1.11.2.3.7.11.12.2.5.1.3,HP-SN-IP-MIB::snDvmrpGenerationId,INTEGER,read-only,,mandatory,,The generation identifier for the routing process. This is used by neighboring routers to detect whether pruning information should be resent.
.1.3.6.1.4.1.11.2.3.7.11.12.2.5.1.4,HP-SN-IP-MIB::snDvmrpProbeInterval,INTEGER,read-write,,mandatory,,This is the time interval at which the router sends out probe messages to discover neighbour routers. Value is in number of seconds. snDvmrpEnable must be 'enabled' before this object is writen.
.1.3.6.1.4.1.11.2.3.7.11.12.2.5.1.5,HP-SN-IP-MIB::snDvmrpReportInterval,INTEGER,read-write,,mandatory,,This is the time interval at which the router sends out full report messages. Value is in number of seconds. snDvmrpEnable must be 'enabled' before this object is writen.
.1.3.6.1.4.1.11.2.3.7.11.12.2.5.1.6,HP-SN-IP-MIB::snDvmrpTriggerInterval,INTEGER,read-write,,mandatory,,This is the time interval at which triggered updates are sent out. Value is in number of seconds. snDvmrpEnable must be 'enabled' before this object is writen.
.1.3.6.1.4.1.11.2.3.7.11.12.2.5.1.7,HP-SN-IP-MIB::snDvmrpNeighborRouterTimeout,INTEGER,read-write,,mandatory,,This is the time interval after which the neighbour router is considered down. Value is in number of seconds. snDvmrpEnable must be 'enabled' before this object is writen.
.1.3.6.1.4.1.11.2.3.7.11.12.2.5.1.8,HP-SN-IP-MIB::snDvmrpRouteExpireTime,INTEGER,read-write,,mandatory,,This is the time interval after which the route expires and becomes unreachable. Value is in number of seconds. snDvmrpEnable must be 'enabled' before this object is writen.
.1.3.6.1.4.1.11.2.3.7.11.12.2.5.1.9,HP-SN-IP-MIB::snDvmrpRouteDiscardTime,INTEGER,read-write,,mandatory,,This is the time interval after which a route is discarded from the route table. Value is in number of seconds. snDvmrpEnable must be 'enabled' before this object is writen.
.1.3.6.1.4.1.11.2.3.7.11.12.2.5.1.10,HP-SN-IP-MIB::snDvmrpPruneAge,INTEGER,read-write,,mandatory,,This is the duration of time for which the prune state is stored. Value is in number of seconds. snDvmrpEnable must be 'enabled' before this object is writen.
.1.3.6.1.4.1.11.2.3.7.11.12.2.5.1.11,HP-SN-IP-MIB::snDvmrpGraftRetransmitTime,INTEGER,read-write,,mandatory,,This is the time interval after which a graft message will be retransmitted if graft acknowledge message has not been received. Value is in number of seconds. snDvmrpEnable must be 'enabled' before this object is writen.
.1.3.6.1.4.1.11.2.3.7.11.12.2.5.1.12,HP-SN-IP-MIB::snDvmrpDefaultRoute,IpAddress,read-write,,mandatory,,This is the IP address of a router that is connected to one of the directly attached subnet. If a multicast route is not present on the local router, this default route will be used for multicast forwarding. snDvmrpEnable must be 'enabled' before this object is writen.
.1.3.6.1.4.1.11.2.3.7.11.12.2.5.1.13,HP-SN-IP-MIB::snDvmrpVInterfaceTable,,not-accessible,,mandatory,,The (conceptual) table listing the router's DVMRP virtual interfaces. snDvmrpEnable must be 'enabled' before this table is read or writen.
.1.3.6.1.4.1.11.2.3.7.11.12.2.5.1.13.1,HP-SN-IP-MIB::snDvmrpVInterfaceEntry,,not-accessible,snDvmrpVInterfaceVifIndex,mandatory,,An entry (conceptual row) in the snDvmrpVInterfaceTable. This row augments ipMRouteInterfaceEntry in the IP Multicast MIB, where the threshold object resides.
.1.3.6.1.4.1.11.2.3.7.11.12.2.5.1.13.1.1,HP-SN-IP-MIB::snDvmrpVInterfaceVifIndex,INTEGER,read-only,,mandatory,,The ifIndex value of this DVMRP virtual interface.
.1.3.6.1.4.1.11.2.3.7.11.12.2.5.1.13.1.2,HP-SN-IP-MIB::snDvmrpVInterfaceType,INTEGER,read-write,,mandatory,tunnel(1):querier(2):subnet(3),The type of this DVMRP virtual interface, whether it uses a tunnel, a physical interface for which we are a querier, or a physical interface for which we are not a querier.
.1.3.6.1.4.1.11.2.3.7.11.12.2.5.1.13.1.3,HP-SN-IP-MIB::snDvmrpVInterfaceOperState,INTEGER,read-only,,mandatory,up(1):down(2),The current operational state of this DVMRP virtual interface.
.1.3.6.1.4.1.11.2.3.7.11.12.2.5.1.13.1.4,HP-SN-IP-MIB::snDvmrpVInterfaceLocalAddress,IpAddress,read-write,,mandatory,,The IP address of the local end of this DVMRP virtual interface.
.1.3.6.1.4.1.11.2.3.7.11.12.2.5.1.13.1.5,HP-SN-IP-MIB::snDvmrpVInterfaceRemoteAddress,IpAddress,read-write,,mandatory,,The IP address of the remote end of this DVMRP virtual interface. For a tunnel, this is the IP address of the neighboring router. For a subnet, this is the subnet address.
.1.3.6.1.4.1.11.2.3.7.11.12.2.5.1.13.1.6,HP-SN-IP-MIB::snDvmrpVInterfaceRemoteSubnetMask,IpAddress,read-only,,mandatory,,The subnet mask for a directly connected subnet. For a tunnel, this should be 0.0.0.0.
.1.3.6.1.4.1.11.2.3.7.11.12.2.5.1.13.1.7,HP-SN-IP-MIB::snDvmrpVInterfaceMetric,INTEGER,read-write,,mandatory,,The distance metric for this DVMRP virtual interface which is used to calculate distance vectors.
.1.3.6.1.4.1.11.2.3.7.11.12.2.5.1.13.1.8,HP-SN-IP-MIB::snDvmrpVInterfaceTtlThreshold,INTEGER,read-write,,mandatory,,This is the minimum time-to-live value to forward the packets out of this virtual interface.
.1.3.6.1.4.1.11.2.3.7.11.12.2.5.1.13.1.9,HP-SN-IP-MIB::snDvmrpVInterfaceAdvertiseLocal,INTEGER,read-write,,mandatory,disabled(0):enabled(1),Enable or disable the advertising of this local route.
.1.3.6.1.4.1.11.2.3.7.11.12.2.5.1.13.1.10,HP-SN-IP-MIB::snDvmrpVInterfaceEncapsulation,INTEGER,read-write,,mandatory,disabled(0):enabled(1),Enable or disable the encapsulation of the DVMRP control packets when using IPINIP encapsulation.
.1.3.6.1.4.1.11.2.3.7.11.12.2.5.1.13.1.11,HP-SN-IP-MIB::snDvmrpVInterfaceStatus,INTEGER,read-write,,mandatory,invalid(1):valid(2):delete(3):create(4):modify(5),This object is used to create and rendering it inoperative. changing the row to operative.
.1.3.6.1.4.1.11.2.3.7.11.12.2.5.1.14,HP-SN-IP-MIB::snDvmrpNeighborTable,,not-accessible,,mandatory,,The (conceptual) table listing the router's DVMRP neighbors, as discovered by receiving Neighbor Probe messages. snDvmrpEnable must be 'enabled' before this table is read.
.1.3.6.1.4.1.11.2.3.7.11.12.2.5.1.14.1,HP-SN-IP-MIB::snDvmrpNeighborEntry,,not-accessible,snDvmrpNeighborEntryIndex,mandatory,,An entry (conceptual row) in the snDvmrpNeighborTable.
.1.3.6.1.4.1.11.2.3.7.11.12.2.5.1.14.1.1,HP-SN-IP-MIB::snDvmrpNeighborEntryIndex,INTEGER,read-only,,mandatory,,The table entry index.
.1.3.6.1.4.1.11.2.3.7.11.12.2.5.1.14.1.2,HP-SN-IP-MIB::snDvmrpNeighborVifIndex,INTEGER,read-only,,mandatory,,The value of VifIndex for the virtual interface used to reach this DVMRP neighbor.
.1.3.6.1.4.1.11.2.3.7.11.12.2.5.1.14.1.3,HP-SN-IP-MIB::snDvmrpNeighborAddress,IpAddress,read-only,,mandatory,,The IP address of the DVMRP neighbor for which this entry contains information.
.1.3.6.1.4.1.11.2.3.7.11.12.2.5.1.14.1.4,HP-SN-IP-MIB::snDvmrpNeighborUpTime,TimeTicks,read-only,,mandatory,,The time since this DVMRP neighbor (last) became a neighbor of the local router.
.1.3.6.1.4.1.11.2.3.7.11.12.2.5.1.14.1.5,HP-SN-IP-MIB::snDvmrpNeighborExpiryTime,TimeTicks,read-only,,mandatory,,The minimum time remaining before this DVMRP neighbor will be aged out.
.1.3.6.1.4.1.11.2.3.7.11.12.2.5.1.14.1.6,HP-SN-IP-MIB::snDvmrpNeighborGenerationId,INTEGER,read-only,,mandatory,,The neighboring router's generation identifier.
.1.3.6.1.4.1.11.2.3.7.11.12.2.5.1.14.1.7,HP-SN-IP-MIB::snDvmrpNeighborMajorVersion,INTEGER,read-only,,mandatory,,The neighboring router's major DVMRP version number.
.1.3.6.1.4.1.11.2.3.7.11.12.2.5.1.14.1.8,HP-SN-IP-MIB::snDvmrpNeighborMinorVersion,INTEGER,read-only,,mandatory,,The neighboring router's minor DVMRP version number.
.1.3.6.1.4.1.11.2.3.7.11.12.2.5.1.14.1.9,HP-SN-IP-MIB::snDvmrpNeighborCapabilities,INTEGER,read-only,,mandatory,,This object describes the neighboring router's capabilities. The following shows the position of each bit: bit position meaning ----------- ------ 3 mtrace bit 2 generationID bit 1 prune bit 0 leaf bit The leaf bit indicates that the neighbor has only one interface with neighbors. The prune bit indicates that the neighbor supports pruning. The generationID bit indicates that the neighbor sends its generationID in Probe messages. The mtrace bit indicates that the neighbor can handle mtrace requests.
.1.3.6.1.4.1.11.2.3.7.11.12.2.5.1.15,HP-SN-IP-MIB::snDvmrpRouteTable,,not-accessible,,mandatory,,The routing table used by DVMRP in place of the unicast routing table. snDvmrpEnable must be 'enabled' before this table is read.
.1.3.6.1.4.1.11.2.3.7.11.12.2.5.1.15.1,HP-SN-IP-MIB::snDvmrpRouteEntry,,not-accessible,snDvmrpRouteEntryIndex,mandatory,,An entry (conceptual row) containing the multicast routing information used by DVMRP in place of the unicast routing information.
.1.3.6.1.4.1.11.2.3.7.11.12.2.5.1.15.1.1,HP-SN-IP-MIB::snDvmrpRouteEntryIndex,INTEGER,read-only,,mandatory,,The table entry index.
.1.3.6.1.4.1.11.2.3.7.11.12.2.5.1.15.1.2,HP-SN-IP-MIB::snDvmrpRouteSource,IpAddress,read-only,,mandatory,,The network address which when combined with the corresponding value of snDvmrpRouteSourceMask identifies the sources for which this entry contains multicast routing information.
.1.3.6.1.4.1.11.2.3.7.11.12.2.5.1.15.1.3,HP-SN-IP-MIB::snDvmrpRouteSourceMask,IpAddress,read-only,,mandatory,,The network mask which when combined with the corresponding value of snDvmrpRouteSource identifies the sources for which this entry contains multicast routing information.
.1.3.6.1.4.1.11.2.3.7.11.12.2.5.1.15.1.4,HP-SN-IP-MIB::snDvmrpRouteUpstreamNeighbor,IpAddress,read-only,,mandatory,,The address of the upstream neighbor (e.g., RPF neighbor) from which IP datagrams from these sources are received.
.1.3.6.1.4.1.11.2.3.7.11.12.2.5.1.15.1.5,HP-SN-IP-MIB::snDvmrpRouteVifIndex,INTEGER,read-only,,mandatory,,The value of snDvmrpVInterfaceVifIndex for the virtual interface on which IP datagrams sent by these sources are received.
.1.3.6.1.4.1.11.2.3.7.11.12.2.5.1.15.1.6,HP-SN-IP-MIB::snDvmrpRouteMetric,INTEGER,read-only,,mandatory,,The distance in hops to the source subnet.
.1.3.6.1.4.1.11.2.3.7.11.12.2.5.1.15.1.7,HP-SN-IP-MIB::snDvmrpRouteExpiryTime,TimeTicks,read-only,,mandatory,,The minimum amount of time remaining before this entry will be aged out.
.1.3.6.1.4.1.11.2.3.7.11.12.2.5.1.16,HP-SN-IP-MIB::snDvmrpRouteNextHopTable,,not-accessible,,mandatory,,The (conceptual) table containing information on the next hops on outgoing interfaces for routing IP multicast datagrams. snDvmrpEnable must be 'enabled' before this table is read.
.1.3.6.1.4.1.11.2.3.7.11.12.2.5.1.16.1,HP-SN-IP-MIB::snDvmrpRouteNextHopEntry,,not-accessible,snDvmrpRouteNextHopSource:snDvmrpRouteNextHopSourceMask:snDvmrpRouteNextHopVifIndex,mandatory,,An entry (conceptual row) in the list of next hops on outgoing interfaces to which IP multicast datagrams from particular sources are routed.
.1.3.6.1.4.1.11.2.3.7.11.12.2.5.1.16.1.1,HP-SN-IP-MIB::snDvmrpRouteNextHopSource,IpAddress,read-only,,mandatory,,The network address which when combined with the corresponding value of snDvmrpRouteNextHopSourceMask identifies the sources for which this entry specifies a next hop on an outgoing interface.
.1.3.6.1.4.1.11.2.3.7.11.12.2.5.1.16.1.2,HP-SN-IP-MIB::snDvmrpRouteNextHopSourceMask,IpAddress,read-only,,mandatory,,The network mask which when combined with the corresponding value of snDvmrpRouteNextHopSource identifies the sources for which this entry specifies a next hop on an outgoing interface.
.1.3.6.1.4.1.11.2.3.7.11.12.2.5.1.16.1.3,HP-SN-IP-MIB::snDvmrpRouteNextHopVifIndex,INTEGER,read-only,,mandatory,,The snDvmrpVInterfaceVifIndex value of the virtual interface for the outgoing interface for this next hop.
.1.3.6.1.4.1.11.2.3.7.11.12.2.5.1.16.1.4,HP-SN-IP-MIB::snDvmrpRouteNextHopType,INTEGER,read-only,,mandatory,leaf(1):branch(2),Type is leaf if no neighbors exist on the outgoing virtual interface. Otherwise, type is branch.
.1.3.6.1.4.1.11.2.3.7.11.12.2.5.1.17,HP-SN-IP-MIB::snDvmrpVIfStatTable,,not-accessible,,mandatory,,The (conceptual) table listing the router's DVMRP virtual interface statistical counters. snDvmrpEnable must be 'enabled' before this table is read.
.1.3.6.1.4.1.11.2.3.7.11.12.2.5.1.17.1,HP-SN-IP-MIB::snDvmrpVIfStatEntry,,not-accessible,snDvmrpVIfStatVifIndex,mandatory,,An entry (conceptual row) in the snDvmrpVIfStatTable.
.1.3.6.1.4.1.11.2.3.7.11.12.2.5.1.17.1.1,HP-SN-IP-MIB::snDvmrpVIfStatVifIndex,INTEGER,read-only,,mandatory,,The ifIndex value of this DVMRP virtual interface.
.1.3.6.1.4.1.11.2.3.7.11.12.2.5.1.17.1.2,HP-SN-IP-MIB::snDvmrpVIfStatInPkts,Counter32,read-only,,mandatory,,The number of packets that have arrived on the DVMRP virtual interface.
.1.3.6.1.4.1.11.2.3.7.11.12.2.5.1.17.1.3,HP-SN-IP-MIB::snDvmrpVIfStatOutPkts,Counter32,read-only,,mandatory,,The number of packets that have been sent on the DVMRP virtual interface.
.1.3.6.1.4.1.11.2.3.7.11.12.2.5.1.17.1.4,HP-SN-IP-MIB::snDvmrpVIfStatInOctets,Counter32,read-only,,mandatory,,The number of octets that have arrived on the DVMRP virtual interface.
.1.3.6.1.4.1.11.2.3.7.11.12.2.5.1.17.1.5,HP-SN-IP-MIB::snDvmrpVIfStatOutOctets,Counter32,read-only,,mandatory,,The number of octets that have been sent on the DVMRP virtual interface.
.1.3.6.1.4.1.11.2.3.7.11.12.2.5.1.17.1.6,HP-SN-IP-MIB::snDvmrpVIfStatInProbePkts,Counter32,read-only,,mandatory,,The number of probe packets that have arrived on the DVMRP virtual interface.
.1.3.6.1.4.1.11.2.3.7.11.12.2.5.1.17.1.7,HP-SN-IP-MIB::snDvmrpVIfStatOutProbePkts,Counter32,read-only,,mandatory,,The number of probe packets that have been sent on the DVMRP virtual interface.
.1.3.6.1.4.1.11.2.3.7.11.12.2.5.1.17.1.8,HP-SN-IP-MIB::snDvmrpVIfStatDiscardProbePkts,Counter32,read-only,,mandatory,,The number of probe packets that have been discarded by the DVMRP virtual interface.
.1.3.6.1.4.1.11.2.3.7.11.12.2.5.1.17.1.9,HP-SN-IP-MIB::snDvmrpVIfStatInRtUpdatePkts,Counter32,read-only,,mandatory,,The number of route update packets that have arrived on the DVMRP virtual interface.
.1.3.6.1.4.1.11.2.3.7.11.12.2.5.1.17.1.10,HP-SN-IP-MIB::snDvmrpVIfStatOutRtUpdatePkts,Counter32,read-only,,mandatory,,The number of route update packets that have been sent on the DVMRP virtual interface.
.1.3.6.1.4.1.11.2.3.7.11.12.2.5.1.17.1.11,HP-SN-IP-MIB::snDvmrpVIfStatDiscardRtUpdatePkts,Counter32,read-only,,mandatory,,The number of route update packets that have been discarded by the DVMRP virtual interface.
.1.3.6.1.4.1.11.2.3.7.11.12.2.5.1.17.1.12,HP-SN-IP-MIB::snDvmrpVIfStatInGraftPkts,Counter32,read-only,,mandatory,,The number of graft packets that have arrived on the DVMRP virtual interface.
.1.3.6.1.4.1.11.2.3.7.11.12.2.5.1.17.1.13,HP-SN-IP-MIB::snDvmrpVIfStatOutGraftPkts,Counter32,read-only,,mandatory,,The number of graft packets that have been sent on the DVMRP virtual interface.
.1.3.6.1.4.1.11.2.3.7.11.12.2.5.1.17.1.14,HP-SN-IP-MIB::snDvmrpVIfStatDiscardGraftPkts,Counter32,read-only,,mandatory,,The number of graft packets that have been discarded by the DVMRP virtual interface.
.1.3.6.1.4.1.11.2.3.7.11.12.2.5.1.17.1.15,HP-SN-IP-MIB::snDvmrpVIfStatInGraftAckPkts,Counter32,read-only,,mandatory,,The number of graft acknowledge packets that have arrived on the DVMRP virtual interface.
.1.3.6.1.4.1.11.2.3.7.11.12.2.5.1.17.1.16,HP-SN-IP-MIB::snDvmrpVIfStatOutGraftAckPkts,Counter32,read-only,,mandatory,,The number of graft acknowledge packets that have been sent on the DVMRP virtual interface.
.1.3.6.1.4.1.11.2.3.7.11.12.2.5.1.17.1.17,HP-SN-IP-MIB::snDvmrpVIfStatDiscardGraftAckPkts,Counter32,read-only,,mandatory,,The number of graft acknowledge packets that have been discarded by the DVMRP virtual interface.
.1.3.6.1.4.1.11.2.3.7.11.12.2.5.1.17.1.18,HP-SN-IP-MIB::snDvmrpVIfStatInPrunePkts,Counter32,read-only,,mandatory,,The number of prune packets that have arrived on the DVMRP virtual interface.
.1.3.6.1.4.1.11.2.3.7.11.12.2.5.1.17.1.19,HP-SN-IP-MIB::snDvmrpVIfStatOutPrunePkts,Counter32,read-only,,mandatory,,The number of prune packets that have been sent on the DVMRP virtual interface.
.1.3.6.1.4.1.11.2.3.7.11.12.2.5.1.17.1.20,HP-SN-IP-MIB::snDvmrpVIfStatDiscardPrunePkts,Counter32,read-only,,mandatory,,The number of prune packets that have been discarded by the DVMRP virtual interface.
.1.3.6.1.4.1.11.2.3.7.11.12.2.6,HP-SN-ROOT-MIB::snIgmp,,,,,,
.1.3.6.1.4.1.11.2.3.7.11.12.2.6.1,HP-SN-IGMP-MIB::snIgmpMIBObjects,,,,,,
.1.3.6.1.4.1.11.2.3.7.11.12.2.6.1.1,HP-SN-IGMP-MIB::snIgmpQueryInterval,INTEGER,read-write,,mandatory,,This is the time interval at which this entity sends out
.1.3.6.1.4.1.11.2.3.7.11.12.2.6.1.2,HP-SN-IGMP-MIB::snIgmpGroupMembershipTime,INTEGER,read-write,,mandatory,,This is the time interval after which a group is considered inactive. For a router, snDvmrpEnable must have been set to 'enabled' before this object is writen. For a switch, snSwGroupIpMcastMode must have been set to 'enabled' before this object is writen.
.1.3.6.1.4.1.11.2.3.7.11.12.2.6.1.3,HP-SN-IGMP-MIB::snIgmpIfTable,,not-accessible,,mandatory,,This table comprises of a list of IGMP interface entries.
.1.3.6.1.4.1.11.2.3.7.11.12.2.6.1.3.1,HP-SN-IGMP-MIB::snIgmpIfEntry,,not-accessible,snIgmpIfEntryIndex,mandatory,,An entry (conceptual row) contains the group membership information for that port.
.1.3.6.1.4.1.11.2.3.7.11.12.2.6.1.3.1.1,HP-SN-IGMP-MIB::snIgmpIfEntryIndex,INTEGER,read-only,,mandatory,,The table entry index.
.1.3.6.1.4.1.11.2.3.7.11.12.2.6.1.3.1.2,HP-SN-IGMP-MIB::snIgmpIfPortNumber,INTEGER,read-only,,mandatory,,This is the interface on which the group was learnt.
.1.3.6.1.4.1.11.2.3.7.11.12.2.6.1.3.1.3,HP-SN-IGMP-MIB::snIgmpIfGroupAddress,IpAddress,read-only,,mandatory,,The group address learnt from the interface.
.1.3.6.1.4.1.11.2.3.7.11.12.2.6.1.3.1.4,HP-SN-IGMP-MIB::snIgmpIfGroupAge,INTEGER,read-only,,mandatory,,This is the interval (seconds) after which the group information will be aged out.
.1.3.6.1.4.1.11.2.3.7.11.12.2.6.1.4,HP-SN-IGMP-MIB::snIgmpStaticGroupTable,,not-accessible,,mandatory,,This table comprises of a list of IGMP static group entries.
.1.3.6.1.4.1.11.2.3.7.11.12.2.6.1.4.1,HP-SN-IGMP-MIB::snIgmpStaticGroupEntry,,not-accessible,snIgmpStaticGroupIfIndex:snIgmpStaticGroupAddress,mandatory,,An entry (conceptual row) contains the IGMP static group membership information.
.1.3.6.1.4.1.11.2.3.7.11.12.2.6.1.4.1.1,HP-SN-IGMP-MIB::snIgmpStaticGroupIfIndex,INTEGER,read-only,,mandatory,,The interface of which the static group was configured.
.1.3.6.1.4.1.11.2.3.7.11.12.2.6.1.4.1.2,HP-SN-IGMP-MIB::snIgmpStaticGroupAddress,IpAddress,read-only,,mandatory,,The group address of which the static group was configured.
.1.3.6.1.4.1.11.2.3.7.11.12.2.6.1.4.1.3,HP-SN-IGMP-MIB::snIgmpStaticGroupPortList,OCTET,read-write,,mandatory,,A list of ports which are the port membership of the static group. Each port is a 16-bit integer ifIndex.
.1.3.6.1.4.1.11.2.3.7.11.12.2.6.1.4.1.4,HP-SN-IGMP-MIB::snIgmpStaticGroupRowStatus,INTEGER,read-write,,mandatory,other(1):valid(2):delete(3):create(4):modify(5),To create or delete a static group entry.
.1.3.6.1.4.1.11.2.3.7.11.12.2.7,HP-SN-ROOT-MIB::snFsrp,,,,,,
.1.3.6.1.4.1.11.2.3.7.11.12.2.7.1,HP-SN-IP-MIB::snFsrpGlobal,,,,,,
.1.3.6.1.4.1.11.2.3.7.11.12.2.7.1.1,HP-SN-IP-MIB::snFsrpGroupOperMode,INTEGER,read-write,,mandatory,disabled(0):enabled(1),The FSRP is configured on this system
.1.3.6.1.4.1.11.2.3.7.11.12.2.7.1.2,HP-SN-IP-MIB::snFsrpIfStateChangeTrap,INTEGER,read-write,,mandatory,disabled(0):enabled(1),Indicates whether the SNMP agent process is
.1.3.6.1.4.1.11.2.3.7.11.12.2.7.2,HP-SN-IP-MIB::snFsrpIntf,,,,,,
.1.3.6.1.4.1.11.2.3.7.11.12.2.7.2.1,HP-SN-IP-MIB::snFsrpIfTable,,not-accessible,,mandatory,,The FSRP Interface Table describes the interfaces from the viewpoint of FSRP.
.1.3.6.1.4.1.11.2.3.7.11.12.2.7.2.1.1,HP-SN-IP-MIB::snFsrpIfEntry,,not-accessible,snFsrpIfPort:snFsrpIfIpAddress,mandatory,,The FSRP Interface Entry describes one interface from the viewpoint of FSRP.
.1.3.6.1.4.1.11.2.3.7.11.12.2.7.2.1.1.1,HP-SN-IP-MIB::snFsrpIfPort,INTEGER,read-only,,mandatory,,The physical router port of this FSRP interface.
.1.3.6.1.4.1.11.2.3.7.11.12.2.7.2.1.1.2,HP-SN-IP-MIB::snFsrpIfIpAddress,IpAddress,read-only,,mandatory,,The IP Address of the physical router port of this interface.
.1.3.6.1.4.1.11.2.3.7.11.12.2.7.2.1.1.3,HP-SN-IP-MIB::snFsrpIfVirRtrIpAddr,IpAddress,read-write,,mandatory,,The IP Address of the Virtual Router for the interface. The Virtual Router IP address need to be configured on  the interface before Redundant Router Function can operate on the interface. This address has to be same on all the routers that going to participate in the Redundant Router Function on a given subnet.
.1.3.6.1.4.1.11.2.3.7.11.12.2.7.2.1.1.4,HP-SN-IP-MIB::snFsrpIfOtherRtrIpAddr,IpAddress,read-write,,mandatory,,The IP Address of the Other Router on this ip subnet that operates FSRP and to whom the Keep Alive message need to be sent by this router. This object must be configured for FSRP to work correctly
.1.3.6.1.4.1.11.2.3.7.11.12.2.7.2.1.1.5,HP-SN-IP-MIB::snFsrpIfPreferLevel,INTEGER,read-write,,mandatory,,The higher the number the higher the priority is. This parameter decides which router should becomes the Active Router for the interface. A Router with higher priority selected to becomes the Active Router.
.1.3.6.1.4.1.11.2.3.7.11.12.2.7.2.1.1.6,HP-SN-IP-MIB::snFsrpIfTrackPortMask,INTEGER,read-write,,deprecated,,This object specifies the identity of the physical port  The interface's Preference Level is reduced by value of  Preference Level parameter when the Track Port states first changes from UP to DOWN. When the Track Port next comes up the interface's Preference Level is increased by the amount specified by the Preference Level. The Standalone router FSRP Track port membership (Not used for Chassis Product)
.1.3.6.1.4.1.11.2.3.7.11.12.2.7.2.1.1.7,HP-SN-IP-MIB::snFsrpIfRowStatus,INTEGER,read-write,,mandatory,invalid(1):valid(2):delete(3):create(4):modify(5),This object is used to create and rendering it inoperative..
.1.3.6.1.4.1.11.2.3.7.11.12.2.7.2.1.1.8,HP-SN-IP-MIB::snFsrpIfState,INTEGER,read-only,,mandatory,init(0):negotiating(1):standby(2):active(3),This object specifies the FSRP Router's interface state as: init(0)...initialization state. negotiating(1)...negotiating state. standby(2)...standby state. active(3)...active state.
.1.3.6.1.4.1.11.2.3.7.11.12.2.7.2.1.1.9,HP-SN-IP-MIB::snFsrpIfKeepAliveTime,INTEGER,read-write,,mandatory,,The heart-beat is from 1 to 120 seconds.
.1.3.6.1.4.1.11.2.3.7.11.12.2.7.2.1.1.10,HP-SN-IP-MIB::snFsrpIfRouterDeadTime,INTEGER,read-write,,mandatory,,The hold time of the Fsrp router is from 3 to 255 seconds.
.1.3.6.1.4.1.11.2.3.7.11.12.2.7.2.1.1.11,HP-SN-IP-MIB::snFsrpIfChassisTrackPortMask,OCTET,read-write,,deprecated,,This object specifies the identity of the physical port  The interface's Preference Level is reduced by value of  Preference Level parameter when the Track Port states first changes from UP to DOWN. When the Track Port next comes up the interface's Preference Level is increased by the amount specified by the Preference Level. The Chassis router FSRP Track port membership. (It was obsoleted after release 07100, replaced by snFsrpIfTrackPortList)
.1.3.6.1.4.1.11.2.3.7.11.12.2.7.2.1.1.12,HP-SN-IP-MIB::snFsrpIfTrackPortList,OCTET,read-write,,mandatory,,This object specifies the identity of the physical port  The interface's Preference Level is reduced by value of  Preference Level parameter when the Track Port states first changes from UP to DOWN. When the Track Port next comes up the interface's Preference Level is increased by the amount specified by the Preference Level. The router FSRP physical track port membership.
.1.3.6.1.4.1.11.2.3.7.11.12.2.8,HP-SN-ROOT-MIB::snGblRt,,,,,,
.1.3.6.1.4.1.11.2.3.7.11.12.2.8.1,HP-SN-IP-MIB::snGblRtGeneral,,,,,,
.1.3.6.1.4.1.11.2.3.7.11.12.2.8.1.1,HP-SN-IP-MIB::snGblRtRouteOnly,INTEGER,read-write,,mandatory,disabled(0):enabled(1),If this object is 'enabled', this switching router will only
.1.3.6.1.4.1.11.2.3.7.11.12.2.9,HP-SN-ROOT-MIB::snPim,,,,,,
.1.3.6.1.4.1.11.2.3.7.11.12.2.9.1,HP-SN-IP-MIB::snPimMIBObjects,,,,,,
.1.3.6.1.4.1.11.2.3.7.11.12.2.9.1.1,HP-SN-IP-MIB::snPimEnable,INTEGER,read-write,,mandatory,disabled(0):enabled(1),Enable or disable PIM on this router.
.1.3.6.1.4.1.11.2.3.7.11.12.2.9.1.2,HP-SN-IP-MIB::snPimNeighborRouterTimeout,INTEGER,read-write,,mandatory,,This is the time interval after which the neighbour router is considered down. Value is in number of seconds. snPimEnable must be 'enabled' before this object is writen.
.1.3.6.1.4.1.11.2.3.7.11.12.2.9.1.3,HP-SN-IP-MIB::snPimHelloTime,INTEGER,read-write,,mandatory,,This is the interval at which hello message is sent out an interface to the neighbouring router. This is used to detect the presence or abscense of a neighbouring router. Value is in number of seconds. snPimEnable must be 'enabled' before this object is writen.
.1.3.6.1.4.1.11.2.3.7.11.12.2.9.1.4,HP-SN-IP-MIB::snPimPruneTime,INTEGER,read-write,,mandatory,,This is the duration of time for which the prune state is stored. Value is in number of seconds. snPimEnable must be 'enabled' before this object is writen.
.1.3.6.1.4.1.11.2.3.7.11.12.2.9.1.5,HP-SN-IP-MIB::snPimGraftRetransmitTime,INTEGER,read-write,,mandatory,,This is the time interval after which a graft message will be retransmitted if graft acknowledge message has not been received. Value is in number of seconds. snPimEnable must be 'enabled' before this object is writen.
.1.3.6.1.4.1.11.2.3.7.11.12.2.9.1.6,HP-SN-IP-MIB::snPimInactivityTime,INTEGER,read-write,,mandatory,,This is the interval after which the forwarding entry is deleted. When a packet is received for a group entry, this time is reset. This is used to only keep the forwarding entries for the active sessions. Value is in number of seconds. snPimEnable must be 'enabled' before this object is writen.
.1.3.6.1.4.1.11.2.3.7.11.12.2.9.1.7,HP-SN-IP-MIB::snPimVInterfaceTable,,not-accessible,,mandatory,,The (conceptual) table listing the router's PIM virtual interfaces. snPimEnable must be 'enabled' before this table is read or writen.
.1.3.6.1.4.1.11.2.3.7.11.12.2.9.1.7.1,HP-SN-IP-MIB::snPimVInterfaceEntry,,not-accessible,snPimVInterfaceVifIndex,mandatory,,An entry (conceptual row) in the snPimVInterfaceTable.
.1.3.6.1.4.1.11.2.3.7.11.12.2.9.1.7.1.1,HP-SN-IP-MIB::snPimVInterfaceVifIndex,INTEGER,read-only,,mandatory,,The ifIndex value of this PIM virtual interface.
.1.3.6.1.4.1.11.2.3.7.11.12.2.9.1.7.1.2,HP-SN-IP-MIB::snPimVInterfaceType,INTEGER,read-write,,mandatory,tunnel(1):subnet(2),The type of PIM virtual interface, whether it uses a tunnel or a physical interface.
.1.3.6.1.4.1.11.2.3.7.11.12.2.9.1.7.1.3,HP-SN-IP-MIB::snPimVInterfaceLocalAddress,IpAddress,read-write,,mandatory,,The IP address of the local end of this PIM virtual interface.
.1.3.6.1.4.1.11.2.3.7.11.12.2.9.1.7.1.4,HP-SN-IP-MIB::snPimVInterfaceLocalSubnetMask,IpAddress,read-only,,mandatory,,The network mask for the IP address of the PIM virtual interface. For a tunnel, this should be 0.0.0.0.
.1.3.6.1.4.1.11.2.3.7.11.12.2.9.1.7.1.5,HP-SN-IP-MIB::snPimVInterfaceRemoteAddress,IpAddress,read-write,,mandatory,,The IP address of the remote end of this PIM virtual interface.
.1.3.6.1.4.1.11.2.3.7.11.12.2.9.1.7.1.6,HP-SN-IP-MIB::snPimVInterfaceDR,IpAddress,read-only,,mandatory,,The Designated Router on this PIM virtual interface. For point-to-point interfaces, this object has the value 0.0.0.0.
.1.3.6.1.4.1.11.2.3.7.11.12.2.9.1.7.1.7,HP-SN-IP-MIB::snPimVInterfaceTtlThreshold,INTEGER,read-write,,mandatory,,This is the minimum time-to-live value to forward the packets out of this interface.
.1.3.6.1.4.1.11.2.3.7.11.12.2.9.1.7.1.8,HP-SN-IP-MIB::snPimVInterfaceStatus,INTEGER,read-write,,mandatory,invalid(1):valid(2):delete(3):create(4):modify(5),This object is used to create and rendering it inoperative. changing the row to operative.
.1.3.6.1.4.1.11.2.3.7.11.12.2.9.1.7.1.9,HP-SN-IP-MIB::snPimVInterfaceMode,INTEGER,read-write,,mandatory,dense(1):sparse(2),The configured mode of this PIM interface.
.1.3.6.1.4.1.11.2.3.7.11.12.2.9.1.8,HP-SN-IP-MIB::snPimNeighborTable,,not-accessible,,mandatory,,The (conceptual) table listing the router's PIM neighbors. snPimEnable must be 'enabled' before this table is read.
.1.3.6.1.4.1.11.2.3.7.11.12.2.9.1.8.1,HP-SN-IP-MIB::snPimNeighborEntry,,not-accessible,snPimNeighborEntryIndex,mandatory,,An entry (conceptual row) in the snPimNeighborTable.
.1.3.6.1.4.1.11.2.3.7.11.12.2.9.1.8.1.1,HP-SN-IP-MIB::snPimNeighborEntryIndex,INTEGER,read-only,,mandatory,,The table entry index.
.1.3.6.1.4.1.11.2.3.7.11.12.2.9.1.8.1.2,HP-SN-IP-MIB::snPimNeighborVifIndex,INTEGER,read-only,,mandatory,,The value of VifIndex for the virtual interface used to reach this PIM neighbor.
.1.3.6.1.4.1.11.2.3.7.11.12.2.9.1.8.1.3,HP-SN-IP-MIB::snPimNeighborAddress,IpAddress,read-only,,mandatory,,The IP address of the PIM neighbor for which this entry contains information.
.1.3.6.1.4.1.11.2.3.7.11.12.2.9.1.8.1.4,HP-SN-IP-MIB::snPimNeighborUpTime,TimeTicks,read-only,,mandatory,,The time since this PIM neighbor (last) became a neighbor of the local router.
.1.3.6.1.4.1.11.2.3.7.11.12.2.9.1.8.1.5,HP-SN-IP-MIB::snPimNeighborExpiryTime,TimeTicks,read-only,,mandatory,,The minimum time remaining before this PIM neighbor will be aged out.
.1.3.6.1.4.1.11.2.3.7.11.12.2.9.1.9,HP-SN-IP-MIB::snPimVIfStatTable,,not-accessible,,mandatory,,The (conceptual) table listing the router's PIM virtual interface statistical counters. snPimEnable must be 'enabled' before this table is read.
.1.3.6.1.4.1.11.2.3.7.11.12.2.9.1.9.1,HP-SN-IP-MIB::snPimVIfStatEntry,,not-accessible,snPimVIfStatVifIndex,mandatory,,An entry (conceptual row) in the snPimVIfStatTable.
.1.3.6.1.4.1.11.2.3.7.11.12.2.9.1.9.1.1,HP-SN-IP-MIB::snPimVIfStatVifIndex,INTEGER,read-only,,mandatory,,The ifIndex value of this PIM virtual interface.
.1.3.6.1.4.1.11.2.3.7.11.12.2.9.1.9.1.2,HP-SN-IP-MIB::snPimVIfStatInJoinPkts,Counter32,read-only,,mandatory,,The number of join packets that have arrived on the PIM virtual interface.
.1.3.6.1.4.1.11.2.3.7.11.12.2.9.1.9.1.3,HP-SN-IP-MIB::snPimVIfStatOutJoinPkts,Counter32,read-only,,mandatory,,The number of join packets that have been sent on the PIM virtual interface.
.1.3.6.1.4.1.11.2.3.7.11.12.2.9.1.9.1.4,HP-SN-IP-MIB::snPimVIfStatDiscardJoinPkts,Counter32,read-only,,mandatory,,The number of join packets that have been discarded by the PIM virtual interface.
.1.3.6.1.4.1.11.2.3.7.11.12.2.9.1.9.1.5,HP-SN-IP-MIB::snPimVIfStatInPrunePkts,Counter32,read-only,,mandatory,,The number of prune packets that have arrived on the PIM virtual interface.
.1.3.6.1.4.1.11.2.3.7.11.12.2.9.1.9.1.6,HP-SN-IP-MIB::snPimVIfStatOutPrunePkts,Counter32,read-only,,mandatory,,The number of prune packets that have been sent on the PIM virtual interface.
.1.3.6.1.4.1.11.2.3.7.11.12.2.9.1.9.1.7,HP-SN-IP-MIB::snPimVIfStatDiscardPrunePkts,Counter32,read-only,,mandatory,,The number of prune packets that have been discarded by the PIM virtual interface.
.1.3.6.1.4.1.11.2.3.7.11.12.2.9.1.9.1.8,HP-SN-IP-MIB::snPimVIfStatInAssertPkts,Counter32,read-only,,mandatory,,The number of assert packets that have arrived on the PIM virtual interface.
.1.3.6.1.4.1.11.2.3.7.11.12.2.9.1.9.1.9,HP-SN-IP-MIB::snPimVIfStatOutAssertPkts,Counter32,read-only,,mandatory,,The number of assert packets that have been sent on the PIM virtual interface.
.1.3.6.1.4.1.11.2.3.7.11.12.2.9.1.9.1.10,HP-SN-IP-MIB::snPimVIfStatDiscardAssertPkts,Counter32,read-only,,mandatory,,The number of assert packets that have been discarded by the PIM virtual interface.
.1.3.6.1.4.1.11.2.3.7.11.12.2.9.1.9.1.11,HP-SN-IP-MIB::snPimVIfStatInHelloPkts,Counter32,read-only,,mandatory,,The number of hello packets that have arrived on the PIM virtual interface.
.1.3.6.1.4.1.11.2.3.7.11.12.2.9.1.9.1.12,HP-SN-IP-MIB::snPimVIfStatOutHelloPkts,Counter32,read-only,,mandatory,,The number of hello packets that have been sent on the PIM virtual interface.
.1.3.6.1.4.1.11.2.3.7.11.12.2.9.1.9.1.13,HP-SN-IP-MIB::snPimVIfStatDiscardHelloPkts,Counter32,read-only,,mandatory,,The number of hello packets that have been discarded by the PIM virtual interface.
.1.3.6.1.4.1.11.2.3.7.11.12.2.9.1.9.1.14,HP-SN-IP-MIB::snPimVIfStatInGraftPkts,Counter32,read-only,,mandatory,,The number of graft packets that have arrived on the PIM virtual interface.
.1.3.6.1.4.1.11.2.3.7.11.12.2.9.1.9.1.15,HP-SN-IP-MIB::snPimVIfStatOutGraftPkts,Counter32,read-only,,mandatory,,The number of graft packets that have been sent on the PIM virtual interface.
.1.3.6.1.4.1.11.2.3.7.11.12.2.9.1.9.1.16,HP-SN-IP-MIB::snPimVIfStatDiscardGraftPkts,Counter32,read-only,,mandatory,,The number of graft packets that have been discarded by the PIM virtual interface.
.1.3.6.1.4.1.11.2.3.7.11.12.2.9.1.9.1.17,HP-SN-IP-MIB::snPimVIfStatInGraftAckPkts,Counter32,read-only,,mandatory,,The number of graft acknowledge packets that have arrived on the PIM virtual interface.
.1.3.6.1.4.1.11.2.3.7.11.12.2.9.1.9.1.18,HP-SN-IP-MIB::snPimVIfStatOutGraftAckPkts,Counter32,read-only,,mandatory,,The number of graft acknowledge packets that have been sent on the PIM virtual interface.
.1.3.6.1.4.1.11.2.3.7.11.12.2.9.1.9.1.19,HP-SN-IP-MIB::snPimVIfStatDiscardGraftAckPkts,Counter32,read-only,,mandatory,,The number of graft acknowledge packets that have been discarded by the PIM virtual interface.
.1.3.6.1.4.1.11.2.3.7.11.12.2.9.2,HP-SN-IP-MIB::snPimSMMIBObjects,,,,,,
.1.3.6.1.4.1.11.2.3.7.11.12.2.9.2.1,HP-SN-IP-MIB::snPimJoinPruneInterval,INTEGER,read-write,,mandatory,,The default interval in seconds at which periodic  be 'enabled' before this table is read or writen.
.1.3.6.1.4.1.11.2.3.7.11.12.2.9.2.2,HP-SN-IP-MIB::snPimCandidateBSRTable,,not-accessible,,mandatory,,Candidate Bootstrap Router information.
.1.3.6.1.4.1.11.2.3.7.11.12.2.9.2.2.1,HP-SN-IP-MIB::snPimCandidateBSREntry,,not-accessible,snPimCandidateBSRPortID,mandatory,,An entry (conceptual row) in the snPimCandidateBSRTable.
.1.3.6.1.4.1.11.2.3.7.11.12.2.9.2.2.1.1,HP-SN-IP-MIB::snPimCandidateBSRPortID,INTEGER,read-write,,mandatory,,The IP address of the PIM interface. The bit 0 to bit 7: port number.  The bit 8 to bit 11: slot number.
.1.3.6.1.4.1.11.2.3.7.11.12.2.9.2.2.1.2,HP-SN-IP-MIB::snPimCandidateBSRIPAddress,IpAddress,read-only,,mandatory,,The (unicast) address of the Candidate BSR.
.1.3.6.1.4.1.11.2.3.7.11.12.2.9.2.2.1.3,HP-SN-IP-MIB::snPimCandidateBSRHashMaskLen,INTEGER,read-write,,mandatory,,The hash mask value for this router as a candidate bootstrap router.
.1.3.6.1.4.1.11.2.3.7.11.12.2.9.2.2.1.4,HP-SN-IP-MIB::snPimCandidateBSRPreference,INTEGER,read-write,,mandatory,,The preference value for this router as a candidate bootstrap router.
.1.3.6.1.4.1.11.2.3.7.11.12.2.9.2.3,HP-SN-IP-MIB::snPimRPSetTable,,not-accessible,,mandatory,,The (conceptual) table listing PIM information for candidate Rendezvous Points (RPs) for IP multicast groups. When the local router is the BSR, this information is obtained from received Candidate-RP-Advertisements. When the local router is not the BSR, this information is obtained from received RP-Set messages. snPimEnable must be 'enabled' before this table is read or writen.
.1.3.6.1.4.1.11.2.3.7.11.12.2.9.2.3.1,HP-SN-IP-MIB::snPimRPSetEntry,,not-accessible,snPimRPSetGroupAddress:snPimRPSetMask:snPimRPSetIPAddress,mandatory,,An entry (conceptual row) in the snPimRPSetTable.
.1.3.6.1.4.1.11.2.3.7.11.12.2.9.2.3.1.1,HP-SN-IP-MIB::snPimRPSetGroupAddress,IpAddress,read-only,,mandatory,,The IP multicast group address which, when combined with snPimRPSetGroupMask, gives the group prefix for which this entry contains information about the Candidate-RP.
.1.3.6.1.4.1.11.2.3.7.11.12.2.9.2.3.1.2,HP-SN-IP-MIB::snPimRPSetMask,IpAddress,read-only,,mandatory,,The multicast group address mask which, when combined with snPimRPSetGroupAddress, gives the group prefix for which this entry contains information about the Candidate-RP.
.1.3.6.1.4.1.11.2.3.7.11.12.2.9.2.3.1.3,HP-SN-IP-MIB::snPimRPSetIPAddress,IpAddress,read-only,,mandatory,,The IP address of the Candidate-RP.
.1.3.6.1.4.1.11.2.3.7.11.12.2.9.2.3.1.4,HP-SN-IP-MIB::snPimRPSetHoldTime,INTEGER,read-only,,mandatory,,The holdtime, in seconds, of a Candidate-RP. If the  local router is not the BSR, this value is 0.
.1.3.6.1.4.1.11.2.3.7.11.12.2.9.2.4,HP-SN-IP-MIB::snPimCandidateRPTable,,not-accessible,,mandatory,,The (conceptual) table listing the IP multicast groups for which the local router is to advertise itself as a Candidate-RP. If this table is empty, then the local router will advertise itself as a Candidate-RP for all groups snPimEnable must be 'enabled' before this table is read or writen.
.1.3.6.1.4.1.11.2.3.7.11.12.2.9.2.4.1,HP-SN-IP-MIB::snPimCandidateRPEntry,,not-accessible,snPimCandidateRPGroupAddress:snPimCandidateRPMask,mandatory,,An entry (conceptual row) in the snPimCandidateRPTable.
.1.3.6.1.4.1.11.2.3.7.11.12.2.9.2.4.1.1,HP-SN-IP-MIB::snPimCandidateRPGroupAddress,IpAddress,read-only,,mandatory,,The IP multicast group address which, when combined with snPimCandidateRPGroupMask, identifies a group prefix for which the local router will advertise itself as a Candidate-RP.
.1.3.6.1.4.1.11.2.3.7.11.12.2.9.2.4.1.2,HP-SN-IP-MIB::snPimCandidateRPMask,IpAddress,read-only,,mandatory,,The multicast group address mask which, when combined with snPimCandidateRPGroupMask, identifies a group prefix for which the local router will advertise itself as a Candidate-RP.
.1.3.6.1.4.1.11.2.3.7.11.12.2.9.2.4.1.3,HP-SN-IP-MIB::snPimCandidateRPIPAddress,IpAddress,read-write,,mandatory,,The (unicast) address of the interface which will be advertised as a Candidate-RP.
.1.3.6.1.4.1.11.2.3.7.11.12.2.9.2.4.1.4,HP-SN-IP-MIB::snPimCandidateRPRowStatus,INTEGER,read-write,,mandatory,noSuch(0):other(1):valid(2):delete(3):create(4):modify(5),The status of this row, by which new entries may be created, or old entries deleted from this table. This object is used to create and delete row in the  table and control if they are used. The values that  can be written are: delete(3)...deletes the row create(4)...creates a new row modify(5)...modifies an exsisting row If the row exists, then a SET with value of create(4)  returns error 'badValue'. Deleted rows go away immediately. The following values can be returned on reads: noSuch(0)...no such row other(1)....some other case valid(2)....the row exists and is valid
.1.3.6.1.4.1.11.2.3.7.11.12.2.10,HP-SN-ROOT-MIB::snAppleTalk,,,,,,
.1.3.6.1.4.1.11.2.3.7.11.12.2.10.1,HP-SN-APPLETALK-MIB::snRtATGeneral,,,,,,
.1.3.6.1.4.1.11.2.3.7.11.12.2.10.1.1,HP-SN-APPLETALK-MIB::snRtATRoutingEnable,INTEGER,read-write,,mandatory,disabled(0):enabled(1),Enable/disable AppleTalk routing function on this box.
.1.3.6.1.4.1.11.2.3.7.11.12.2.10.1.2,HP-SN-APPLETALK-MIB::snRtATClearArpCache,INTEGER,read-write,,mandatory,normal(0):clear(1),clear(1) will clear AppleTalk arp cache table.
.1.3.6.1.4.1.11.2.3.7.11.12.2.10.1.3,HP-SN-APPLETALK-MIB::snRtATClearFwdCache,INTEGER,read-write,,mandatory,normal(0):clear(1),clear(1) will clear AppleTalk forward cache table.
.1.3.6.1.4.1.11.2.3.7.11.12.2.10.1.4,HP-SN-APPLETALK-MIB::snRtATClearRoute,INTEGER,read-write,,mandatory,normal(0):clear(1),clear(1) will clear AppleTalk route table.
.1.3.6.1.4.1.11.2.3.7.11.12.2.10.1.5,HP-SN-APPLETALK-MIB::snRtATClearTrafficCounters,INTEGER,read-write,,mandatory,normal(0):clear(1),clear(1) will clear AppleTalk network statistics counters.
.1.3.6.1.4.1.11.2.3.7.11.12.2.10.1.6,HP-SN-APPLETALK-MIB::snRtATArpRetransmitCount,INTEGER,read-write,,mandatory,,The number of AppleTalk ARP request retransmits if the
.1.3.6.1.4.1.11.2.3.7.11.12.2.10.1.7,HP-SN-APPLETALK-MIB::snRtATArpRetransmitInterval,INTEGER,read-write,,mandatory,,The waiting time interval for an AppleTalk ARP response
.1.3.6.1.4.1.11.2.3.7.11.12.2.10.1.8,HP-SN-APPLETALK-MIB::snRtATGleanPacketsEnable,INTEGER,read-write,,mandatory,disabled(0):enabled(1),Enable/disable AppleTalk glean packets function on this box.
.1.3.6.1.4.1.11.2.3.7.11.12.2.10.1.9,HP-SN-APPLETALK-MIB::snRtATRtmpUpdateInterval,INTEGER,read-write,,mandatory,,The periodic time interval to transmit a RTMP
.1.3.6.1.4.1.11.2.3.7.11.12.2.10.1.10,HP-SN-APPLETALK-MIB::snRtATZipQueryInterval,INTEGER,read-write,,mandatory,,The periodic time interval to transmit a ZIP
.1.3.6.1.4.1.11.2.3.7.11.12.2.10.1.11,HP-SN-APPLETALK-MIB::snRtATInRtmpPkts,Counter32,read-only,,mandatory,,The total number of RTMP packets received by
.1.3.6.1.4.1.11.2.3.7.11.12.2.10.1.12,HP-SN-APPLETALK-MIB::snRtATOutRtmpPkts,Counter32,read-only,,mandatory,,The total number of RTMP packets which were
.1.3.6.1.4.1.11.2.3.7.11.12.2.10.1.13,HP-SN-APPLETALK-MIB::snRtATFilteredRtmpPkts,Counter32,read-only,,mandatory,,The total number of RTMP packets which were
.1.3.6.1.4.1.11.2.3.7.11.12.2.10.1.14,HP-SN-APPLETALK-MIB::snRtATInZipPkts,Counter32,read-only,,mandatory,,The total number of ZIP packets received by
.1.3.6.1.4.1.11.2.3.7.11.12.2.10.1.15,HP-SN-APPLETALK-MIB::snRtATOutZipPkts,Counter32,read-only,,mandatory,,The total number of ZIP packets which were
.1.3.6.1.4.1.11.2.3.7.11.12.2.10.1.16,HP-SN-APPLETALK-MIB::snRtATInZipGZLPkts,Counter32,read-only,,mandatory,,The total number of ZIP get zone list packets received by
.1.3.6.1.4.1.11.2.3.7.11.12.2.10.1.17,HP-SN-APPLETALK-MIB::snRtATOutZipGZLPkts,Counter32,read-only,,mandatory,,The total number of ZIP get zone list packets which were
.1.3.6.1.4.1.11.2.3.7.11.12.2.10.1.18,HP-SN-APPLETALK-MIB::snRtATInZipNetInfoPkts,Counter32,read-only,,mandatory,,The total number of ZIP network information packets received by
.1.3.6.1.4.1.11.2.3.7.11.12.2.10.1.19,HP-SN-APPLETALK-MIB::snRtATOutZipNetInfoPkts,Counter32,read-only,,mandatory,,The total number of ZIP network information packets which were
.1.3.6.1.4.1.11.2.3.7.11.12.2.10.1.20,HP-SN-APPLETALK-MIB::snRtATInDdpPkts,Counter32,read-only,,mandatory,,The total number of DDP datagrams received by
.1.3.6.1.4.1.11.2.3.7.11.12.2.10.1.21,HP-SN-APPLETALK-MIB::snRtATOutDdpPkts,Counter32,read-only,,mandatory,,The total number of DDP datagrams which were
.1.3.6.1.4.1.11.2.3.7.11.12.2.10.1.22,HP-SN-APPLETALK-MIB::snRtATForwardedDdpPkts,Counter32,read-only,,mandatory,,The number of input DDP datagrams for which this entity
.1.3.6.1.4.1.11.2.3.7.11.12.2.10.1.23,HP-SN-APPLETALK-MIB::snRtATInDeliveredDdpPkts,Counter32,read-only,,mandatory,,The total number of input DDP datagrams for which
.1.3.6.1.4.1.11.2.3.7.11.12.2.10.1.24,HP-SN-APPLETALK-MIB::snRtATDroppedNoRouteDdpPkts,Counter32,read-only,,mandatory,,The total number of DDP datagrams dropped because a
.1.3.6.1.4.1.11.2.3.7.11.12.2.10.1.25,HP-SN-APPLETALK-MIB::snRtATDroppedBadHopCountsDdpPkts,Counter32,read-only,,mandatory,,The total number of input DDP datagrams dropped
.1.3.6.1.4.1.11.2.3.7.11.12.2.10.1.26,HP-SN-APPLETALK-MIB::snRtATDroppedOtherReasonsDdpPkts,Counter32,read-only,,mandatory,,The total number of DDP datagrams dropped because
.1.3.6.1.4.1.11.2.3.7.11.12.2.10.1.27,HP-SN-APPLETALK-MIB::snRtATInAarpPkts,Counter32,read-only,,mandatory,,The total number of AppleTalk ARP packets received by
.1.3.6.1.4.1.11.2.3.7.11.12.2.10.1.28,HP-SN-APPLETALK-MIB::snRtATOutAarpPkts,Counter32,read-only,,mandatory,,The total number of AppleTalk ARP packets which were
.1.3.6.1.4.1.11.2.3.7.11.12.2.10.2,HP-SN-APPLETALK-MIB::snRtATSocketPriorityTable,,not-accessible,,mandatory,,AppleTalk socket priority table.
.1.3.6.1.4.1.11.2.3.7.11.12.2.10.2.1,HP-SN-APPLETALK-MIB::snRtATSocketPriorityEntry,,not-accessible,snRtATSocketPrioritySocket,mandatory,,An entry in the AppleTalk socket priority table.
.1.3.6.1.4.1.11.2.3.7.11.12.2.10.2.1.1,HP-SN-APPLETALK-MIB::snRtATSocketPrioritySocket,INTEGER,read-only,,mandatory,,Socket number for a socket priority entry.
.1.3.6.1.4.1.11.2.3.7.11.12.2.10.2.1.2,HP-SN-APPLETALK-MIB::snRtATSocketPriorityPriority,INTEGER,read-write,,mandatory,level0(0):level1(1):level2(2):level3(3):level4(4):level5(5):level6(6):level7(7),The Standalone router Priority level applies to a socket number:
.1.3.6.1.4.1.11.2.3.7.11.12.2.10.3,HP-SN-APPLETALK-MIB::snRtATPortZoneFilterTable,,not-accessible,,mandatory,,AppleTalk interface zone filter table.
.1.3.6.1.4.1.11.2.3.7.11.12.2.10.3.1,HP-SN-APPLETALK-MIB::snRtATPortZoneFilterEntry,,not-accessible,snRtATPortZoneFilterPortIndex:snRtATPortZoneFilterZone,mandatory,,An entry in the AppleTalk interface zone filter table.
.1.3.6.1.4.1.11.2.3.7.11.12.2.10.3.1.1,HP-SN-APPLETALK-MIB::snRtATPortZoneFilterPortIndex,INTEGER,read-only,,mandatory,,The port index for a zone filter entry.
.1.3.6.1.4.1.11.2.3.7.11.12.2.10.3.1.2,HP-SN-APPLETALK-MIB::snRtATPortZoneFilterZone,OCTET,read-only,,mandatory,,The zone name granted for this filter.
.1.3.6.1.4.1.11.2.3.7.11.12.2.10.3.1.3,HP-SN-APPLETALK-MIB::snRtATPortZoneFilterAction,INTEGER,read-write,,mandatory,deny(0):permit(1),Action to take if the AppleTalk packet match
.1.3.6.1.4.1.11.2.3.7.11.12.2.10.3.1.4,HP-SN-APPLETALK-MIB::snRtATPortZoneFilterRtmpEnable,INTEGER,read-write,,mandatory,disabled(0):enabled(1),Enable/disable RTMP filtering.
.1.3.6.1.4.1.11.2.3.7.11.12.2.10.3.1.5,HP-SN-APPLETALK-MIB::snRtATPortZoneFilterRowStatus,INTEGER,read-write,,mandatory,other(1):valid(2):delete(3):create(4),To create or delete a zone filter entry.
.1.3.6.1.4.1.11.2.3.7.11.12.2.10.4,HP-SN-APPLETALK-MIB::snRtATPortTable,,not-accessible,,mandatory,,AppleTalk port table.
.1.3.6.1.4.1.11.2.3.7.11.12.2.10.4.1,HP-SN-APPLETALK-MIB::snRtATPortEntry,,not-accessible,snRtATPortIndex,mandatory,,An entry in the AppleTalk port table.
.1.3.6.1.4.1.11.2.3.7.11.12.2.10.4.1.1,HP-SN-APPLETALK-MIB::snRtATPortIndex,INTEGER,read-only,,mandatory,,The port index for port table entry.
.1.3.6.1.4.1.11.2.3.7.11.12.2.10.4.1.2,HP-SN-APPLETALK-MIB::snRtATPortArpAge,INTEGER,read-write,,mandatory,,The time in minutes an ARP entry can
.1.3.6.1.4.1.11.2.3.7.11.12.2.10.4.1.3,HP-SN-APPLETALK-MIB::snRtATPortState,INTEGER,read-only,,mandatory,other(1):down(2):up(3),The up and down state of this port.
.1.3.6.1.4.1.11.2.3.7.11.12.2.10.4.1.4,HP-SN-APPLETALK-MIB::snRtATPortSeedRouter,INTEGER,read-only,,mandatory,other(1):seedRouter(2):nonSeedRouter(3),This port was configured to seed or non-seed router.
.1.3.6.1.4.1.11.2.3.7.11.12.2.10.4.1.5,HP-SN-APPLETALK-MIB::snRtATPortOperationMode,INTEGER,read-only,,mandatory,other(1):seedRouter(2):nonSeedRouter(3):notOperational(4):routingDisabled(5),The operation mode of this port.
.1.3.6.1.4.1.11.2.3.7.11.12.2.10.5,HP-SN-APPLETALK-MIB::snRtATFwdCacheTable,,not-accessible,,mandatory,,AppleTalk forwarding cache table.
.1.3.6.1.4.1.11.2.3.7.11.12.2.10.5.1,HP-SN-APPLETALK-MIB::snRtATFwdCacheEntry,,not-accessible,snRtATFwdCacheIndex,mandatory,,An entry in the AppleTalk forwarding cache table.
.1.3.6.1.4.1.11.2.3.7.11.12.2.10.5.1.1,HP-SN-APPLETALK-MIB::snRtATFwdCacheIndex,INTEGER,read-only,,mandatory,,The table index for an AppleTalk forwarding cache table entry.
.1.3.6.1.4.1.11.2.3.7.11.12.2.10.5.1.2,HP-SN-APPLETALK-MIB::snRtATFwdCacheNetAddr,OCTET,read-only,,mandatory,,The AppleTalk network address of a station.
.1.3.6.1.4.1.11.2.3.7.11.12.2.10.5.1.3,HP-SN-APPLETALK-MIB::snRtATFwdCacheMacAddr,OCTET,read-only,,mandatory,,The Mac address of an AppleTalk station.
.1.3.6.1.4.1.11.2.3.7.11.12.2.10.5.1.4,HP-SN-APPLETALK-MIB::snRtATFwdCacheNextHop,OCTET,read-only,,mandatory,,The next hop router network address.
.1.3.6.1.4.1.11.2.3.7.11.12.2.10.5.1.5,HP-SN-APPLETALK-MIB::snRtATFwdCacheOutgoingPort,INTEGER,read-only,,mandatory,,The outgoing port of which packets will forward to.
.1.3.6.1.4.1.11.2.3.7.11.12.2.10.5.1.6,HP-SN-APPLETALK-MIB::snRtATFwdCacheType,INTEGER,read-only,,mandatory,dynamic(1):permanent(2),The 'dynamic' or 'permanent' type for an AppleTalk forwarding
.1.3.6.1.4.1.11.2.3.7.11.12.2.10.5.1.7,HP-SN-APPLETALK-MIB::snRtATFwdCacheAction,INTEGER,read-only,,mandatory,other(1):forward(2):forUs(3):waitForArp(4):dropPacket(5),The action to take.
.1.3.6.1.4.1.11.2.3.7.11.12.2.10.5.1.8,HP-SN-APPLETALK-MIB::snRtATFwdCacheVLanId,INTEGER,read-only,,mandatory,,The VLAN ID for an AppleTalk forwarding cache table entry.
.1.3.6.1.4.1.11.2.3.7.11.12.2.10.6,HP-SN-APPLETALK-MIB::snRtATZoneTable,,not-accessible,,mandatory,,AppleTalk zone table.
.1.3.6.1.4.1.11.2.3.7.11.12.2.10.6.1,HP-SN-APPLETALK-MIB::snRtATZoneEntry,,not-accessible,snRtATZoneIndex,mandatory,,An entry in the AppleTalk zone table.
.1.3.6.1.4.1.11.2.3.7.11.12.2.10.6.1.1,HP-SN-APPLETALK-MIB::snRtATZoneIndex,INTEGER,read-only,,mandatory,,The table index for an AppleTalk zone table entry.
.1.3.6.1.4.1.11.2.3.7.11.12.2.10.6.1.2,HP-SN-APPLETALK-MIB::snRtATZoneNetStart,OCTET,read-only,,mandatory,,The first AppleTalk network address in the range of this zone name.
.1.3.6.1.4.1.11.2.3.7.11.12.2.10.6.1.3,HP-SN-APPLETALK-MIB::snRtATZoneNetEnd,OCTET,read-only,,mandatory,,The last AppleTalk network address in the range of this zone name.
.1.3.6.1.4.1.11.2.3.7.11.12.2.10.6.1.4,HP-SN-APPLETALK-MIB::snRtATZoneName,OCTET,read-only,,mandatory,,The zone name.
.1.3.6.1.4.1.11.2.3.7.11.12.2.10.7,HP-SN-APPLETALK-MIB::snRtATAddZoneFilterTable,,not-accessible,,mandatory,,AppleTalk additional zone filter table. Additional zones
.1.3.6.1.4.1.11.2.3.7.11.12.2.10.7.1,HP-SN-APPLETALK-MIB::snRtATAddZoneFilterEntry,,not-accessible,snRtATAddZoneFilterPortIndex,mandatory,,An entry in the AppleTalk additional zone filter table.
.1.3.6.1.4.1.11.2.3.7.11.12.2.10.7.1.1,HP-SN-APPLETALK-MIB::snRtATAddZoneFilterPortIndex,INTEGER,read-only,,mandatory,,The port index for additional zone filter table entry.
.1.3.6.1.4.1.11.2.3.7.11.12.2.10.7.1.2,HP-SN-APPLETALK-MIB::snRtATAddZoneFilterAction,INTEGER,read-write,,mandatory,deny(0):permit(1),Action to take if no zone filter match.
.1.3.6.1.4.1.11.2.3.7.11.12.2.10.7.1.3,HP-SN-APPLETALK-MIB::snRtATAddZoneFilterRtmpEnable,INTEGER,read-write,,mandatory,disabled(0):enabled(1),Enable/disable RTMP filtering on additional zone.
.1.3.6.1.4.1.11.2.3.7.11.12.2.11,HP-SN-ROOT-MIB::snBgp4,,,,,,
.1.3.6.1.4.1.11.2.3.7.11.12.2.11.1,HP-SN-BGP4-GROUP-MIB::snBgp4Gen,,,,,,
.1.3.6.1.4.1.11.2.3.7.11.12.2.11.1.1,HP-SN-BGP4-GROUP-MIB::snBgp4GenAlwaysCompareMed,INTEGER,read-write,,mandatory,disabled(0):enabled(1),To enable/disable the comparison of the Multi-Exit Discriminator for paths from 
.1.3.6.1.4.1.11.2.3.7.11.12.2.11.1.2,HP-SN-BGP4-GROUP-MIB::snBgp4GenAutoSummary,INTEGER,read-write,,mandatory,disabled(0):enabled(1),To enable/disable the default behavior of automatic summarization of subnet routes into network-level routes.
.1.3.6.1.4.1.11.2.3.7.11.12.2.11.1.3,HP-SN-BGP4-GROUP-MIB::snBgp4GenDefaultLocalPreference,INTEGER,read-write,,mandatory,,To set the default local preference attribute.
.1.3.6.1.4.1.11.2.3.7.11.12.2.11.1.4,HP-SN-BGP4-GROUP-MIB::snBgp4GenDefaultInfoOriginate,INTEGER,read-write,,mandatory,disabled(0):enabled(1),To enable/disable the default Information Originate.
.1.3.6.1.4.1.11.2.3.7.11.12.2.11.1.5,HP-SN-BGP4-GROUP-MIB::snBgp4GenFastExternalFallover,INTEGER,read-write,,mandatory,disabled(0):enabled(1),To enable/disable an action of immediately reset the BGP sessions of any directly adjacent external neighbors if the link used to reach them goes down.
.1.3.6.1.4.1.11.2.3.7.11.12.2.11.1.6,HP-SN-BGP4-GROUP-MIB::snBgp4GenNextBootNeighbors,INTEGER,read-write,,mandatory,,The next-boot configured number of neighbors in a BGP Peer Group. The minimum value of this MIB is snBgp4GenMinNeighbors. The maximum value of this MIB is snBgp4GenMaxNeighbors.
.1.3.6.1.4.1.11.2.3.7.11.12.2.11.1.7,HP-SN-BGP4-GROUP-MIB::snBgp4GenNextBootRoutes,INTEGER,read-write,,mandatory,,The next-boot configured number of Routes. The minimum value of this MIB is snBgp4GenMinRoutes. The maximum value of this MIB is snBgp4GenMaxRoutes.
.1.3.6.1.4.1.11.2.3.7.11.12.2.11.1.8,HP-SN-BGP4-GROUP-MIB::snBgp4GenSynchronization,INTEGER,read-write,,mandatory,disabled(0):enabled(1),To enable/disable the synchronization between BGP and your IGP.
.1.3.6.1.4.1.11.2.3.7.11.12.2.11.1.9,HP-SN-BGP4-GROUP-MIB::snBgp4GenKeepAliveTime,INTEGER,read-write,,mandatory,,The Keep alive timer.
.1.3.6.1.4.1.11.2.3.7.11.12.2.11.1.10,HP-SN-BGP4-GROUP-MIB::snBgp4GenHoldTime,INTEGER,read-write,,mandatory,,The Hold time timer.
.1.3.6.1.4.1.11.2.3.7.11.12.2.11.1.11,HP-SN-BGP4-GROUP-MIB::snBgp4GenRouterId,IpAddress,read-write,,mandatory,,BGP Router Id.
.1.3.6.1.4.1.11.2.3.7.11.12.2.11.1.12,HP-SN-BGP4-GROUP-MIB::snBgp4GenTableMap,OCTET,read-write,,mandatory,,An octet string of the route-map name, each character of the name is represented by one octet.
.1.3.6.1.4.1.11.2.3.7.11.12.2.11.1.13,HP-SN-BGP4-GROUP-MIB::snBgp4GenAdminStat,INTEGER,read-write,,mandatory,disabled(0):enabled(1),The administrative status of BGP4 in the router. The value 'enabled' denotes that the BGP4 routing is active in this router; 'disabled' disables BGP4 routing on this router.
.1.3.6.1.4.1.11.2.3.7.11.12.2.11.1.14,HP-SN-BGP4-GROUP-MIB::snBgp4GenDefaultMetric,INTEGER,read-write,,mandatory,,To set default metric values for the BGP4 protocol.
.1.3.6.1.4.1.11.2.3.7.11.12.2.11.1.15,HP-SN-BGP4-GROUP-MIB::snBgp4GenMaxNeighbors,INTEGER,read-only,,mandatory,,The maximum number of neighbors can be configured in a BGP Peer Group.
.1.3.6.1.4.1.11.2.3.7.11.12.2.11.1.16,HP-SN-BGP4-GROUP-MIB::snBgp4GenMinNeighbors,INTEGER,read-only,,mandatory,,The minimum number of neighbors can be configured in a BGP Peer Group.
.1.3.6.1.4.1.11.2.3.7.11.12.2.11.1.17,HP-SN-BGP4-GROUP-MIB::snBgp4GenMaxRoutes,INTEGER,read-only,,mandatory,,The maximum configured number of Routes.
.1.3.6.1.4.1.11.2.3.7.11.12.2.11.1.18,HP-SN-BGP4-GROUP-MIB::snBgp4GenMinRoutes,INTEGER,read-only,,mandatory,,The minimum configured number of Routes.
.1.3.6.1.4.1.11.2.3.7.11.12.2.11.1.19,HP-SN-BGP4-GROUP-MIB::snBgp4GenMaxAddrFilters,INTEGER,read-only,,mandatory,,The maximum configured number of BGP4 address filters.
.1.3.6.1.4.1.11.2.3.7.11.12.2.11.1.20,HP-SN-BGP4-GROUP-MIB::snBgp4GenMaxAggregateAddresses,INTEGER,read-only,,mandatory,,The maximum configured number of BGP4 aggregate addresses.
.1.3.6.1.4.1.11.2.3.7.11.12.2.11.1.21,HP-SN-BGP4-GROUP-MIB::snBgp4GenMaxAsPathFilters,INTEGER,read-only,,mandatory,,The maximum configured number of BGP4 AS-PATH filters.
.1.3.6.1.4.1.11.2.3.7.11.12.2.11.1.22,HP-SN-BGP4-GROUP-MIB::snBgp4GenMaxCommunityFilters,INTEGER,read-only,,mandatory,,The maximum configured number of BGP4 Community filters.
.1.3.6.1.4.1.11.2.3.7.11.12.2.11.1.23,HP-SN-BGP4-GROUP-MIB::snBgp4GenMaxNetworks,INTEGER,read-only,,mandatory,,The maximum configured number of BGP4 Networks.
.1.3.6.1.4.1.11.2.3.7.11.12.2.11.1.24,HP-SN-BGP4-GROUP-MIB::snBgp4GenMaxRouteMapFilters,INTEGER,read-only,,mandatory,,The maximum configured number of BGP4 Route-map Filters.
.1.3.6.1.4.1.11.2.3.7.11.12.2.11.1.25,HP-SN-BGP4-GROUP-MIB::snBgp4GenNeighPrefixMinValue,INTEGER,read-only,,mandatory,,The minimum configured value of BGP4 Neighbor Prefix.
.1.3.6.1.4.1.11.2.3.7.11.12.2.11.1.26,HP-SN-BGP4-GROUP-MIB::snBgp4GenOperNeighbors,INTEGER,read-only,,mandatory,,The current operational max number of neighbors configured for a BGP Group.
.1.3.6.1.4.1.11.2.3.7.11.12.2.11.1.27,HP-SN-BGP4-GROUP-MIB::snBgp4GenOperRoutes,INTEGER,read-only,,mandatory,,The current operational number of Routes.
.1.3.6.1.4.1.11.2.3.7.11.12.2.11.1.28,HP-SN-BGP4-GROUP-MIB::snBgp4GenLocalAs,INTEGER,read-write,,mandatory,,Bgp4 local autonomous system number.
.1.3.6.1.4.1.11.2.3.7.11.12.2.11.1.29,HP-SN-BGP4-GROUP-MIB::snBgp4GenRoutesInstalled,INTEGER,read-only,,mandatory,,Bgp4 installed routes.
.1.3.6.1.4.1.11.2.3.7.11.12.2.11.1.30,HP-SN-BGP4-GROUP-MIB::snBgp4GenAsPathInstalled,INTEGER,read-only,,mandatory,,Bgp4 installed autonomous system path.
.1.3.6.1.4.1.11.2.3.7.11.12.2.11.1.31,HP-SN-BGP4-GROUP-MIB::snBgp4ExternalDistance,INTEGER,read-write,,mandatory,,Administrative distance for BGP external routes.
.1.3.6.1.4.1.11.2.3.7.11.12.2.11.1.32,HP-SN-BGP4-GROUP-MIB::snBgp4InternalDistance,INTEGER,read-write,,mandatory,,Administrative distance for BGP internal routes.
.1.3.6.1.4.1.11.2.3.7.11.12.2.11.1.33,HP-SN-BGP4-GROUP-MIB::snBgp4LocalDistance,INTEGER,read-write,,mandatory,,Administrative distance for BGP local routes.
.1.3.6.1.4.1.11.2.3.7.11.12.2.11.1.34,HP-SN-BGP4-GROUP-MIB::snBgp4OperNumOfAttributes,INTEGER,read-only,,mandatory,,The operational number of attribute entries.
.1.3.6.1.4.1.11.2.3.7.11.12.2.11.1.35,HP-SN-BGP4-GROUP-MIB::snBgp4NextBootMaxAttributes,INTEGER,read-write,,mandatory,,The next boot maximum attribute entries. 10000 means reset to default.
.1.3.6.1.4.1.11.2.3.7.11.12.2.11.1.36,HP-SN-BGP4-GROUP-MIB::snBgp4ClusterId,INTEGER,read-write,,mandatory,,A cluster ID which is represented by 4 bytes unsigned 
.1.3.6.1.4.1.11.2.3.7.11.12.2.11.1.37,HP-SN-BGP4-GROUP-MIB::snBgp4ClientToClientReflection,INTEGER,read-write,,mandatory,disabled(0):enabled(1),To enable/disable the client to client reflection in BGP4.
.1.3.6.1.4.1.11.2.3.7.11.12.2.11.1.38,HP-SN-BGP4-GROUP-MIB::snBgp4GenTotalNeighbors,INTEGER,read-only,,mandatory,,The current total number of neighbors running in a BGP Group.
.1.3.6.1.4.1.11.2.3.7.11.12.2.11.1.39,HP-SN-BGP4-GROUP-MIB::snBgp4GenMaxPaths,INTEGER,read-write,,mandatory,,The maximum configured number of Paths.
.1.3.6.1.4.1.11.2.3.7.11.12.2.11.1.40,HP-SN-BGP4-GROUP-MIB::snBgp4GenConfedId,INTEGER,read-write,,mandatory,,Bgp4 Confederation Id.
.1.3.6.1.4.1.11.2.3.7.11.12.2.11.1.41,HP-SN-BGP4-GROUP-MIB::snBgp4GenConfedPeers,OCTET,read-write,,mandatory,,An AS number from 1 to 0xFFFF construct confederation peers.
.1.3.6.1.4.1.11.2.3.7.11.12.2.11.1.42,HP-SN-BGP4-GROUP-MIB::snBgp4GenDampening,INTEGER,read-write,,mandatory,none(0):parameters(1):routeMap(2),The dampening of BGP4 in the router.  value 'none' denotes that the BGP4 dampening is off 'parameters' denotes parameters are confibrurable. 'routeMap' denotes routemap is configurable.
.1.3.6.1.4.1.11.2.3.7.11.12.2.11.1.43,HP-SN-BGP4-GROUP-MIB::snBgp4GenDampenHalfLife,INTEGER,read-write,,mandatory,,Bgp4 Dampening Half Life.
.1.3.6.1.4.1.11.2.3.7.11.12.2.11.1.44,HP-SN-BGP4-GROUP-MIB::snBgp4GenDampenReuse,INTEGER,read-write,,mandatory,,Bgp4 Dampening Reuse.
.1.3.6.1.4.1.11.2.3.7.11.12.2.11.1.45,HP-SN-BGP4-GROUP-MIB::snBgp4GenDampenSuppress,INTEGER,read-write,,mandatory,,Bgp4 Dampening Suppress.
.1.3.6.1.4.1.11.2.3.7.11.12.2.11.1.46,HP-SN-BGP4-GROUP-MIB::snBgp4GenDampenMaxSuppress,INTEGER,read-write,,mandatory,,Bgp4 Dampening Max Suppress Time.
.1.3.6.1.4.1.11.2.3.7.11.12.2.11.1.47,HP-SN-BGP4-GROUP-MIB::snBgp4GenDampenMap,OCTET,read-write,,mandatory,,An octet string of the route-map name for dampening, each character of the name is represented by one octet.
.1.3.6.1.4.1.11.2.3.7.11.12.2.11.2,HP-SN-BGP4-GROUP-MIB::snBgp4AddrFilter,,,,,,
.1.3.6.1.4.1.11.2.3.7.11.12.2.11.2.1,HP-SN-BGP4-GROUP-MIB::snBgp4AddrFilterTable,,not-accessible,,mandatory,,Bgp4 Address Filter table.
.1.3.6.1.4.1.11.2.3.7.11.12.2.11.2.1.1,HP-SN-BGP4-GROUP-MIB::snBgp4AddrFilterEntry,,not-accessible,snBgp4AddrFilterIndex,mandatory,,An entry in the Bgp4 Address Filter table.
.1.3.6.1.4.1.11.2.3.7.11.12.2.11.2.1.1.1,HP-SN-BGP4-GROUP-MIB::snBgp4AddrFilterIndex,INTEGER,read-only,,mandatory,,The table index for a filter entry.
.1.3.6.1.4.1.11.2.3.7.11.12.2.11.2.1.1.2,HP-SN-BGP4-GROUP-MIB::snBgp4AddrFilterAction,INTEGER,read-write,,mandatory,deny(0):permit(1),Action to take if the bgp address match
.1.3.6.1.4.1.11.2.3.7.11.12.2.11.2.1.1.3,HP-SN-BGP4-GROUP-MIB::snBgp4AddrFilterSourceIp,IpAddress,read-write,,mandatory,,Source IP address.
.1.3.6.1.4.1.11.2.3.7.11.12.2.11.2.1.1.4,HP-SN-BGP4-GROUP-MIB::snBgp4AddrFilterSourceMask,IpAddress,read-write,,mandatory,,Source IP subnet mask.
.1.3.6.1.4.1.11.2.3.7.11.12.2.11.2.1.1.5,HP-SN-BGP4-GROUP-MIB::snBgp4AddrFilterDestIp,IpAddress,read-write,,mandatory,,Destination IP address.
.1.3.6.1.4.1.11.2.3.7.11.12.2.11.2.1.1.6,HP-SN-BGP4-GROUP-MIB::snBgp4AddrFilterDestMask,IpAddress,read-write,,mandatory,,Destination IP subnet mask.
.1.3.6.1.4.1.11.2.3.7.11.12.2.11.2.1.1.7,HP-SN-BGP4-GROUP-MIB::snBgp4AddrFilterRowStatus,INTEGER,read-write,,mandatory,invalid(1):valid(2):delete(3):create(4):modify(5),This object is used to create and
.1.3.6.1.4.1.11.2.3.7.11.12.2.11.3,HP-SN-BGP4-GROUP-MIB::snBgp4AggregateAddr,,,,,,
.1.3.6.1.4.1.11.2.3.7.11.12.2.11.3.1,HP-SN-BGP4-GROUP-MIB::snBgp4AggregateAddrTable,,not-accessible,,mandatory,,Bgp4 Aggregate Address table.
.1.3.6.1.4.1.11.2.3.7.11.12.2.11.3.1.1,HP-SN-BGP4-GROUP-MIB::snBgp4AggregateAddrEntry,,not-accessible,snBgp4AggregateAddrIp:snBgp4AggregateAddrMask:snBgp4AggregateAddrOption,mandatory,,An entry in the Bgp4 Aggregate Address table.
.1.3.6.1.4.1.11.2.3.7.11.12.2.11.3.1.1.1,HP-SN-BGP4-GROUP-MIB::snBgp4AggregateAddrIp,IpAddress,read-only,,mandatory,,Aggregate Address IP address.
.1.3.6.1.4.1.11.2.3.7.11.12.2.11.3.1.1.2,HP-SN-BGP4-GROUP-MIB::snBgp4AggregateAddrMask,IpAddress,read-only,,mandatory,,Aggregate Address IP subnet mask.
.1.3.6.1.4.1.11.2.3.7.11.12.2.11.3.1.1.3,HP-SN-BGP4-GROUP-MIB::snBgp4AggregateAddrOption,INTEGER,read-only,,mandatory,address(1):asSet(2):summaryOnly(3):suppressMap(4):advertiseMap(5):attributeMap(6),address(1), asSet(2), summaryOnly(3), 
.1.3.6.1.4.1.11.2.3.7.11.12.2.11.3.1.1.4,HP-SN-BGP4-GROUP-MIB::snBgp4AggregateAddrMap,OCTET,read-write,,mandatory,,This object associates with the snBgp4AggregateAddrOption and 
.1.3.6.1.4.1.11.2.3.7.11.12.2.11.3.1.1.5,HP-SN-BGP4-GROUP-MIB::snBgp4AggregateAddrRowStatus,INTEGER,read-write,,mandatory,invalid(1):valid(2):delete(3):create(4):modify(5),This object is used to create and
.1.3.6.1.4.1.11.2.3.7.11.12.2.11.4,HP-SN-BGP4-GROUP-MIB::snBgp4AsPathFilter,,,,,,
.1.3.6.1.4.1.11.2.3.7.11.12.2.11.4.1,HP-SN-BGP4-GROUP-MIB::snBgp4AsPathFilterTable,,not-accessible,,mandatory,,Bgp4 AS-Path Filter table.
.1.3.6.1.4.1.11.2.3.7.11.12.2.11.4.1.1,HP-SN-BGP4-GROUP-MIB::snBgp4AsPathFilterEntry,,not-accessible,snBgp4AsPathFilterIndex,mandatory,,An entry in the Bgp4 As-path Filter table.
.1.3.6.1.4.1.11.2.3.7.11.12.2.11.4.1.1.1,HP-SN-BGP4-GROUP-MIB::snBgp4AsPathFilterIndex,INTEGER,read-only,,mandatory,,The table index for a filter entry.
.1.3.6.1.4.1.11.2.3.7.11.12.2.11.4.1.1.2,HP-SN-BGP4-GROUP-MIB::snBgp4AsPathFilterAction,INTEGER,read-write,,mandatory,deny(0):permit(1),Action to take if the bgp address match
.1.3.6.1.4.1.11.2.3.7.11.12.2.11.4.1.1.3,HP-SN-BGP4-GROUP-MIB::snBgp4AsPathFilterRegExpression,OCTET,read-write,,mandatory,,Autonomous system in the filter using a regular expression.
.1.3.6.1.4.1.11.2.3.7.11.12.2.11.4.1.1.4,HP-SN-BGP4-GROUP-MIB::snBgp4AsPathFilterRowStatus,INTEGER,read-write,,mandatory,invalid(1):valid(2):delete(3):create(4):modify(5),This object is used to create and
.1.3.6.1.4.1.11.2.3.7.11.12.2.11.5,HP-SN-BGP4-GROUP-MIB::snBgp4CommunityFilter,,,,,,
.1.3.6.1.4.1.11.2.3.7.11.12.2.11.5.1,HP-SN-BGP4-GROUP-MIB::snBgp4CommunityFilterTable,,not-accessible,,mandatory,,Bgp4 Community Filter table.
.1.3.6.1.4.1.11.2.3.7.11.12.2.11.5.1.1,HP-SN-BGP4-GROUP-MIB::snBgp4CommunityFilterEntry,,not-accessible,snBgp4CommunityFilterIndex,mandatory,,An entry in the Bgp4 Community Filter table.
.1.3.6.1.4.1.11.2.3.7.11.12.2.11.5.1.1.1,HP-SN-BGP4-GROUP-MIB::snBgp4CommunityFilterIndex,INTEGER,read-only,,mandatory,,The table index for a filter entry.
.1.3.6.1.4.1.11.2.3.7.11.12.2.11.5.1.1.2,HP-SN-BGP4-GROUP-MIB::snBgp4CommunityFilterAction,INTEGER,read-write,,mandatory,deny(0):permit(1),Action to take if the bgp address match
.1.3.6.1.4.1.11.2.3.7.11.12.2.11.5.1.1.3,HP-SN-BGP4-GROUP-MIB::snBgp4CommunityFilterCommNum,OCTET,read-write,,mandatory,,A number from 1 to 0xFFFFFFFF. There are 20 of them. 
.1.3.6.1.4.1.11.2.3.7.11.12.2.11.5.1.1.4,HP-SN-BGP4-GROUP-MIB::snBgp4CommunityFilterInternet,INTEGER,read-write,,mandatory,disabled(0):enabled(1),Disabled/Enabled the Internet Community.
.1.3.6.1.4.1.11.2.3.7.11.12.2.11.5.1.1.5,HP-SN-BGP4-GROUP-MIB::snBgp4CommunityFilterNoAdvertise,INTEGER,read-write,,mandatory,false(0):true(1),Do not advertise this route to any peer (internal or external).
.1.3.6.1.4.1.11.2.3.7.11.12.2.11.5.1.1.6,HP-SN-BGP4-GROUP-MIB::snBgp4CommunityFilterNoExport,INTEGER,read-write,,mandatory,false(0):true(1),Do not advertise this route to an EBGP peer.
.1.3.6.1.4.1.11.2.3.7.11.12.2.11.5.1.1.7,HP-SN-BGP4-GROUP-MIB::snBgp4CommunityFilterRowStatus,INTEGER,read-write,,mandatory,invalid(1):valid(2):delete(3):create(4):modify(5),This object is used to create and
.1.3.6.1.4.1.11.2.3.7.11.12.2.11.5.1.1.8,HP-SN-BGP4-GROUP-MIB::snBgp4CommunityFilterLocalAs,INTEGER,read-write,,mandatory,false(0):true(1),Send this route to peers in other sub-autonomous systems within
.1.3.6.1.4.1.11.2.3.7.11.12.2.11.6,HP-SN-BGP4-GROUP-MIB::snBgp4NeighGenCfg,,,,,,
.1.3.6.1.4.1.11.2.3.7.11.12.2.11.6.1,HP-SN-BGP4-GROUP-MIB::snBgp4NeighGenCfgTable,,not-accessible,,mandatory,,Bgp4 Neighbor General Configuration table.
.1.3.6.1.4.1.11.2.3.7.11.12.2.11.6.1.1,HP-SN-BGP4-GROUP-MIB::snBgp4NeighGenCfgEntry,,not-accessible,snBgp4NeighGenCfgNeighIp,mandatory,,An entry in the Bgp4 Community Filter table.
.1.3.6.1.4.1.11.2.3.7.11.12.2.11.6.1.1.1,HP-SN-BGP4-GROUP-MIB::snBgp4NeighGenCfgNeighIp,IpAddress,read-only,,mandatory,,The IP Address for a neighbor entry.
.1.3.6.1.4.1.11.2.3.7.11.12.2.11.6.1.1.2,HP-SN-BGP4-GROUP-MIB::snBgp4NeighGenCfgAdvertlevel,INTEGER,read-write,,mandatory,,To set the minimum interval between the 
.1.3.6.1.4.1.11.2.3.7.11.12.2.11.6.1.1.3,HP-SN-BGP4-GROUP-MIB::snBgp4NeighGenCfgDefOriginate,INTEGER,read-write,,mandatory,disabled(0):enabled(1),To enable/disable the default originate for this neighbor.
.1.3.6.1.4.1.11.2.3.7.11.12.2.11.6.1.1.4,HP-SN-BGP4-GROUP-MIB::snBgp4NeighGenCfgEbgpMultihop,INTEGER,read-write,,mandatory,disabled(0):enabled(1),To enable/disable the EBGP Muitihop for this neighbor.
.1.3.6.1.4.1.11.2.3.7.11.12.2.11.6.1.1.5,HP-SN-BGP4-GROUP-MIB::snBgp4NeighGenCfgMaxPrefix,INTEGER,read-write,,mandatory,,To control how many prefixes can be received from a neighbor. The minimum value of the maximum prefix is snBgp4GenNeighPrefixMinValue. The maximum value of the maximum prefix is snBgp4GenOperRoutes.
.1.3.6.1.4.1.11.2.3.7.11.12.2.11.6.1.1.6,HP-SN-BGP4-GROUP-MIB::snBgp4NeighGenCfgNextHopSelf,INTEGER,read-write,,mandatory,disabled(0):enabled(1),To enable/disable the next-hop processing of BGP updates on the router.
.1.3.6.1.4.1.11.2.3.7.11.12.2.11.6.1.1.7,HP-SN-BGP4-GROUP-MIB::snBgp4NeighGenCfgRemoteAs,INTEGER,read-write,,mandatory,,To specify a neighbor with an autonomous system number(AS).
.1.3.6.1.4.1.11.2.3.7.11.12.2.11.6.1.1.8,HP-SN-BGP4-GROUP-MIB::snBgp4NeighGenCfgSendComm,INTEGER,read-write,,mandatory,disabled(0):enabled(1),To specify that a COMMUNITES attribute should be sent to a BGP neighbor.
.1.3.6.1.4.1.11.2.3.7.11.12.2.11.6.1.1.9,HP-SN-BGP4-GROUP-MIB::snBgp4NeighGenCfgWeight,INTEGER,read-write,,mandatory,,To assign a weight to a neighbor connection.
.1.3.6.1.4.1.11.2.3.7.11.12.2.11.6.1.1.10,HP-SN-BGP4-GROUP-MIB::snBgp4NeighGenCfgWeightFilterList,OCTET,read-write,,mandatory,,A number from 1 to 0xFFFF. There are 16 of them. 
.1.3.6.1.4.1.11.2.3.7.11.12.2.11.6.1.1.11,HP-SN-BGP4-GROUP-MIB::snBgp4NeighGenCfgRowStatus,INTEGER,read-write,,mandatory,invalid(1):valid(2):delete(3):create(4):modify(5):applyDefault(6),This object is used to create and
.1.3.6.1.4.1.11.2.3.7.11.12.2.11.6.1.1.12,HP-SN-BGP4-GROUP-MIB::snBgp4NeighGenCfgUpdateSrcLpbIntf,INTEGER,read-write,,mandatory,,To allow internal BGP sessions to use any operational  loopback interface (1..8) for TCP connections. Zero interface means to restore the interface assignment to the  closest interface, which is called the best local address.
.1.3.6.1.4.1.11.2.3.7.11.12.2.11.6.1.1.13,HP-SN-BGP4-GROUP-MIB::snBgp4NeighGenCfgRouteRefClient,INTEGER,read-write,,mandatory,disabled(0):enabled(1),To configure the router as a BGP route reflector, enable the specified neighbor as its client.
.1.3.6.1.4.1.11.2.3.7.11.12.2.11.6.1.1.14,HP-SN-BGP4-GROUP-MIB::snBgp4NeighGenCfgRemovePrivateAs,INTEGER,read-write,,mandatory,disabled(0):enabled(1),To enable/disable filtering private AS number.
.1.3.6.1.4.1.11.2.3.7.11.12.2.11.6.1.1.15,HP-SN-BGP4-GROUP-MIB::snBgp4NeighGenCfgEbgpMultihopTtl,INTEGER,read-write,,mandatory,,The EBGP Muitihop TTL for this neighbor.
.1.3.6.1.4.1.11.2.3.7.11.12.2.11.6.1.1.16,HP-SN-BGP4-GROUP-MIB::snBgp4NeighGenCfgShutdown,INTEGER,read-write,,mandatory,disabled(0):enabled(1),To enable/disable BGP4 Nbr Shutdown.
.1.3.6.1.4.1.11.2.3.7.11.12.2.11.6.1.1.17,HP-SN-BGP4-GROUP-MIB::snBgp4NeighGenCfgKeepAliveTime,INTEGER,read-write,,mandatory,,The Keep alive timer.
.1.3.6.1.4.1.11.2.3.7.11.12.2.11.6.1.1.18,HP-SN-BGP4-GROUP-MIB::snBgp4NeighGenCfgHoldTime,INTEGER,read-write,,mandatory,,The Hold time timer.
.1.3.6.1.4.1.11.2.3.7.11.12.2.11.6.1.1.19,HP-SN-BGP4-GROUP-MIB::snBgp4NeighGenCfgDefOrigMap,OCTET,read-write,,mandatory,,An octet string of the route-map name, each character of the name is represented by one octet.
.1.3.6.1.4.1.11.2.3.7.11.12.2.11.6.1.1.20,HP-SN-BGP4-GROUP-MIB::snBgp4NeighGenCfgDesc,OCTET,read-write,,mandatory,,An octet string of the neighbor description.
.1.3.6.1.4.1.11.2.3.7.11.12.2.11.6.1.1.21,HP-SN-BGP4-GROUP-MIB::snBgp4NeighGenCfgPass,OCTET,read-write,,mandatory,,An octet string of the neighbor Md5 password.
.1.3.6.1.4.1.11.2.3.7.11.12.2.11.7,HP-SN-BGP4-GROUP-MIB::snBgp4NeighDistGroup,,,,,,
.1.3.6.1.4.1.11.2.3.7.11.12.2.11.7.1,HP-SN-BGP4-GROUP-MIB::snBgp4NeighDistGroupTable,,not-accessible,,mandatory,,Bgp4 Neighbor Distribute Group table.
.1.3.6.1.4.1.11.2.3.7.11.12.2.11.7.1.1,HP-SN-BGP4-GROUP-MIB::snBgp4NeighDistGroupEntry,,not-accessible,snBgp4NeighDistGroupNeighIp:snBgp4NeighDistGroupDir,mandatory,,An entry in the Bgp4 Distribute Group table.
.1.3.6.1.4.1.11.2.3.7.11.12.2.11.7.1.1.1,HP-SN-BGP4-GROUP-MIB::snBgp4NeighDistGroupNeighIp,IpAddress,read-only,,mandatory,,The IP Address for a neighbor entry.
.1.3.6.1.4.1.11.2.3.7.11.12.2.11.7.1.1.2,HP-SN-BGP4-GROUP-MIB::snBgp4NeighDistGroupDir,INTEGER,read-only,,mandatory,out(0):in(1),The incoming/outgoing advertisements to which 
.1.3.6.1.4.1.11.2.3.7.11.12.2.11.7.1.1.3,HP-SN-BGP4-GROUP-MIB::snBgp4NeighDistGroupAccessList,OCTET,read-write,,mandatory,,A number from 1 to 0xFFFF. There are 16 of them. 
.1.3.6.1.4.1.11.2.3.7.11.12.2.11.7.1.1.4,HP-SN-BGP4-GROUP-MIB::snBgp4NeighDistGroupRowStatus,INTEGER,read-write,,mandatory,invalid(1):valid(2):delete(3):create(4):modify(5),This object is used to create and
.1.3.6.1.4.1.11.2.3.7.11.12.2.11.7.1.1.5,HP-SN-BGP4-GROUP-MIB::snBgp4NeighDistGroupInFilterList,OCTET,read-write,,mandatory,,A number from 1 to 0xFFFF. There are 16 of them. 
.1.3.6.1.4.1.11.2.3.7.11.12.2.11.7.1.1.6,HP-SN-BGP4-GROUP-MIB::snBgp4NeighDistGroupOutFilterList,OCTET,read-write,,mandatory,,A number from 1 to 0xFFFF. There are 16 of them. 
.1.3.6.1.4.1.11.2.3.7.11.12.2.11.7.1.1.7,HP-SN-BGP4-GROUP-MIB::snBgp4NeighDistGroupInIpAccessList,OCTET,read-write,,mandatory,,A number from 1 to 0xFFFF. There are 1 of them. 
.1.3.6.1.4.1.11.2.3.7.11.12.2.11.7.1.1.8,HP-SN-BGP4-GROUP-MIB::snBgp4NeighDistGroupOutIpAccessList,OCTET,read-write,,mandatory,,A number from 1 to 0xFFFF. There are 1 of them. 
.1.3.6.1.4.1.11.2.3.7.11.12.2.11.7.1.1.9,HP-SN-BGP4-GROUP-MIB::snBgp4NeighDistGroupInPrefixList,OCTET,read-write,,mandatory,,A Prefix name list. 
.1.3.6.1.4.1.11.2.3.7.11.12.2.11.7.1.1.10,HP-SN-BGP4-GROUP-MIB::snBgp4NeighDistGroupOutPrefixList,OCTET,read-write,,mandatory,,A Prefix name list. 
.1.3.6.1.4.1.11.2.3.7.11.12.2.11.8,HP-SN-BGP4-GROUP-MIB::snBgp4NeighFilterGroup,,,,,,
.1.3.6.1.4.1.11.2.3.7.11.12.2.11.8.1,HP-SN-BGP4-GROUP-MIB::snBgp4NeighFilterGroupTable,,not-accessible,,mandatory,,Bgp4 Neighbor Filter Group table.
.1.3.6.1.4.1.11.2.3.7.11.12.2.11.8.1.1,HP-SN-BGP4-GROUP-MIB::snBgp4NeighFilterGroupEntry,,not-accessible,snBgp4NeighFilterGroupNeighIp:snBgp4NeighFilterGroupDir,mandatory,,An entry in the Bgp4 Neighbor Filter Group table.
.1.3.6.1.4.1.11.2.3.7.11.12.2.11.8.1.1.1,HP-SN-BGP4-GROUP-MIB::snBgp4NeighFilterGroupNeighIp,IpAddress,read-only,,mandatory,,The IP Address for a neighbor entry.
.1.3.6.1.4.1.11.2.3.7.11.12.2.11.8.1.1.2,HP-SN-BGP4-GROUP-MIB::snBgp4NeighFilterGroupDir,INTEGER,read-only,,mandatory,out(0):in(1),The incoming/outgoing advertisements to which 
.1.3.6.1.4.1.11.2.3.7.11.12.2.11.8.1.1.3,HP-SN-BGP4-GROUP-MIB::snBgp4NeighFilterGroupAccessList,OCTET,read-write,,mandatory,,A number from 1 to 0xFFFF. There are 16 of them. 
.1.3.6.1.4.1.11.2.3.7.11.12.2.11.8.1.1.4,HP-SN-BGP4-GROUP-MIB::snBgp4NeighFilterGroupRowStatus,INTEGER,read-write,,mandatory,invalid(1):valid(2):delete(3):create(4):modify(5),This object is used to create and
.1.3.6.1.4.1.11.2.3.7.11.12.2.11.8.1.1.5,HP-SN-BGP4-GROUP-MIB::snBgp4NeighFilterGroupInFilterList,OCTET,read-write,,mandatory,,A number from 1 to 0xFFFF. There are 16 of them. 
.1.3.6.1.4.1.11.2.3.7.11.12.2.11.8.1.1.6,HP-SN-BGP4-GROUP-MIB::snBgp4NeighFilterGroupOutFilterList,OCTET,read-write,,mandatory,,A number from 1 to 0xFFFF. There are 16 of them. 
.1.3.6.1.4.1.11.2.3.7.11.12.2.11.8.1.1.7,HP-SN-BGP4-GROUP-MIB::snBgp4NeighFilterGroupInAsPathAccessList,OCTET,read-write,,mandatory,,A number from 1 to 0xFFFF. There are 1 of them. 
.1.3.6.1.4.1.11.2.3.7.11.12.2.11.8.1.1.8,HP-SN-BGP4-GROUP-MIB::snBgp4NeighFilterGroupOutAsPathAccessList,OCTET,read-write,,mandatory,,A number from 1 to 0xFFFF. There are 1 of them. 
.1.3.6.1.4.1.11.2.3.7.11.12.2.11.8.1.1.9,HP-SN-BGP4-GROUP-MIB::snBgp4NeighFilterGroupWeight,INTEGER,read-write,,mandatory,,To assign a weight to a neighbor filter.
.1.3.6.1.4.1.11.2.3.7.11.12.2.11.8.1.1.10,HP-SN-BGP4-GROUP-MIB::snBgp4NeighFilterGroupWeightAccessList,OCTET,read-write,,mandatory,,A number from 1 to 0xFFFF. There are 1 of them. 
.1.3.6.1.4.1.11.2.3.7.11.12.2.11.9,HP-SN-BGP4-GROUP-MIB::snBgp4NeighRouteMap,,,,,,
.1.3.6.1.4.1.11.2.3.7.11.12.2.11.9.1,HP-SN-BGP4-GROUP-MIB::snBgp4NeighRouteMapTable,,not-accessible,,mandatory,,Bgp4 Neighbor Route Map table.
.1.3.6.1.4.1.11.2.3.7.11.12.2.11.9.1.1,HP-SN-BGP4-GROUP-MIB::snBgp4NeighRouteMapEntry,,not-accessible,snBgp4NeighRouteMapNeighIp:snBgp4NeighRouteMapDir,mandatory,,An entry in the Bgp4 Route Map table.
.1.3.6.1.4.1.11.2.3.7.11.12.2.11.9.1.1.1,HP-SN-BGP4-GROUP-MIB::snBgp4NeighRouteMapNeighIp,IpAddress,read-only,,mandatory,,The IP Address for a neighbor entry.
.1.3.6.1.4.1.11.2.3.7.11.12.2.11.9.1.1.2,HP-SN-BGP4-GROUP-MIB::snBgp4NeighRouteMapDir,INTEGER,read-only,,mandatory,out(0):in(1),The incoming/outgoing advertisements to which 
.1.3.6.1.4.1.11.2.3.7.11.12.2.11.9.1.1.3,HP-SN-BGP4-GROUP-MIB::snBgp4NeighRouteMapMapName,OCTET,read-write,,mandatory,,An octet string of the route-map name, Each character of the name is represented by one octet.
.1.3.6.1.4.1.11.2.3.7.11.12.2.11.9.1.1.4,HP-SN-BGP4-GROUP-MIB::snBgp4NeighRouteMapRowStatus,INTEGER,read-write,,mandatory,invalid(1):valid(2):delete(3):create(4):modify(5),This object is used to create and
.1.3.6.1.4.1.11.2.3.7.11.12.2.11.10,HP-SN-BGP4-GROUP-MIB::snBgp4Network,,,,,,
.1.3.6.1.4.1.11.2.3.7.11.12.2.11.10.1,HP-SN-BGP4-GROUP-MIB::snBgp4NetworkTable,,not-accessible,,mandatory,,Bgp4 Network Weight table.
.1.3.6.1.4.1.11.2.3.7.11.12.2.11.10.1.1,HP-SN-BGP4-GROUP-MIB::snBgp4NetworkEntry,,not-accessible,snBgp4NetworkIp:snBgp4NetworkSubnetMask,mandatory,,An entry in the Bgp4 Network Weight table.
.1.3.6.1.4.1.11.2.3.7.11.12.2.11.10.1.1.1,HP-SN-BGP4-GROUP-MIB::snBgp4NetworkIp,IpAddress,read-only,,mandatory,,The IP Address for a network entry.
.1.3.6.1.4.1.11.2.3.7.11.12.2.11.10.1.1.2,HP-SN-BGP4-GROUP-MIB::snBgp4NetworkSubnetMask,IpAddress,read-only,,mandatory,,The subnet mask for a network entry.
.1.3.6.1.4.1.11.2.3.7.11.12.2.11.10.1.1.3,HP-SN-BGP4-GROUP-MIB::snBgp4NetworkWeight,INTEGER,read-write,,mandatory,,To assign a weight to a neighbor connection.
.1.3.6.1.4.1.11.2.3.7.11.12.2.11.10.1.1.4,HP-SN-BGP4-GROUP-MIB::snBgp4NetworkBackdoor,INTEGER,read-write,,mandatory,disabled(0):enabled(1),To enable/disable the backdoor for this network.
.1.3.6.1.4.1.11.2.3.7.11.12.2.11.10.1.1.5,HP-SN-BGP4-GROUP-MIB::snBgp4NetworkRowStatus,INTEGER,read-write,,mandatory,invalid(1):valid(2):delete(3):create(4):modify(5),This object is used to create and
.1.3.6.1.4.1.11.2.3.7.11.12.2.11.11,HP-SN-BGP4-GROUP-MIB::snBgp4Redis,,,,,,
.1.3.6.1.4.1.11.2.3.7.11.12.2.11.11.1,HP-SN-BGP4-GROUP-MIB::snBgp4RedisTable,,not-accessible,,mandatory,,The BGP4 Redistribution contains configurations that could be imported into the BGP4 domain.
.1.3.6.1.4.1.11.2.3.7.11.12.2.11.11.1.1,HP-SN-BGP4-GROUP-MIB::snBgp4RedisEntry,,not-accessible,snBgp4RedisProtocol,mandatory,,The BGP4 Redistribution Entry specifies a particular RIP  or , OSPF, or Static route to be imported into the BGP4 domain.
.1.3.6.1.4.1.11.2.3.7.11.12.2.11.11.1.1.1,HP-SN-BGP4-GROUP-MIB::snBgp4RedisProtocol,INTEGER,read-only,,mandatory,rip(1):ospf(2):static(3):connected(4):isis(5),The imported configuration into BGP4 domain is set in the following:  rip(1): - the RIP. ospf(2): - the OSPF. static(3): - the static. connected(4): - the connected. isis(5): - the ISIS.
.1.3.6.1.4.1.11.2.3.7.11.12.2.11.11.1.1.2,HP-SN-BGP4-GROUP-MIB::snBgp4RedisMetric,INTEGER,read-write,,mandatory,,The metric of using the specified protocol Metric value.
.1.3.6.1.4.1.11.2.3.7.11.12.2.11.11.1.1.3,HP-SN-BGP4-GROUP-MIB::snBgp4RedisRouteMap,OCTET,read-write,,mandatory,,An octet string of the route-map name, each character of the name is represented by one octet.
.1.3.6.1.4.1.11.2.3.7.11.12.2.11.11.1.1.4,HP-SN-BGP4-GROUP-MIB::snBgp4RedisWeight,INTEGER,read-write,,mandatory,,To assign a weight for the specified protocol.
.1.3.6.1.4.1.11.2.3.7.11.12.2.11.11.1.1.5,HP-SN-BGP4-GROUP-MIB::snBgp4RedisMatchInternal,INTEGER,read-write,,mandatory,disabled(0):enabled(1),This object is only applicable to the OSPF protocol.
.1.3.6.1.4.1.11.2.3.7.11.12.2.11.11.1.1.6,HP-SN-BGP4-GROUP-MIB::snBgp4RedisMatchExternal1,INTEGER,read-write,,mandatory,disabled(0):enabled(1),This object is only applicable to the OSPF protocol.
.1.3.6.1.4.1.11.2.3.7.11.12.2.11.11.1.1.7,HP-SN-BGP4-GROUP-MIB::snBgp4RedisMatchExternal2,INTEGER,read-write,,mandatory,disabled(0):enabled(1),This object is only applicable to the OSPF protocol.
.1.3.6.1.4.1.11.2.3.7.11.12.2.11.11.1.1.8,HP-SN-BGP4-GROUP-MIB::snBgp4RedisRowStatus,INTEGER,read-write,,mandatory,invalid(1):valid(2):delete(3):create(4):modify(5),This object is used to create and
.1.3.6.1.4.1.11.2.3.7.11.12.2.11.12,HP-SN-BGP4-GROUP-MIB::snBgp4RouteMapFilter,,,,,,
.1.3.6.1.4.1.11.2.3.7.11.12.2.11.12.1,HP-SN-BGP4-GROUP-MIB::snBgp4RouteMapFilterTable,,not-accessible,,mandatory,,Bgp4 RouteMap Filter table.
.1.3.6.1.4.1.11.2.3.7.11.12.2.11.12.1.1,HP-SN-BGP4-GROUP-MIB::snBgp4RouteMapFilterEntry,,not-accessible,snBgp4RouteMapFilterMapName:snBgp4RouteMapFilterSequenceNum,mandatory,,An entry in the Bgp4 RouteMap Filter table.
.1.3.6.1.4.1.11.2.3.7.11.12.2.11.12.1.1.1,HP-SN-BGP4-GROUP-MIB::snBgp4RouteMapFilterMapName,OCTET,read-only,,mandatory,,An octet string of the route-map name, each character of the name is represented by one octet.
.1.3.6.1.4.1.11.2.3.7.11.12.2.11.12.1.1.2,HP-SN-BGP4-GROUP-MIB::snBgp4RouteMapFilterSequenceNum,INTEGER,read-only,,mandatory,,A sequence number for this particular route-map.
.1.3.6.1.4.1.11.2.3.7.11.12.2.11.12.1.1.3,HP-SN-BGP4-GROUP-MIB::snBgp4RouteMapFilterAction,INTEGER,read-write,,mandatory,deny(0):permit(1),Action to take if the bgp address match
.1.3.6.1.4.1.11.2.3.7.11.12.2.11.12.1.1.4,HP-SN-BGP4-GROUP-MIB::snBgp4RouteMapFilterRowStatus,INTEGER,read-write,,mandatory,invalid(1):valid(2):delete(3):create(4):modify(5),This object is used to create and
.1.3.6.1.4.1.11.2.3.7.11.12.2.11.13,HP-SN-BGP4-GROUP-MIB::snBgp4RouteMapMatch,,,,,,
.1.3.6.1.4.1.11.2.3.7.11.12.2.11.13.1,HP-SN-BGP4-GROUP-MIB::snBgp4RouteMapMatchTable,,not-accessible,,mandatory,,Bgp4 Route Map Set table.
.1.3.6.1.4.1.11.2.3.7.11.12.2.11.13.1.1,HP-SN-BGP4-GROUP-MIB::snBgp4RouteMapMatchEntry,,not-accessible,snBgp4RouteMapMatchMapName:snBgp4RouteMapMatchSequenceNum,mandatory,,An entry in the Bgp4 Route Map Match table.
.1.3.6.1.4.1.11.2.3.7.11.12.2.11.13.1.1.1,HP-SN-BGP4-GROUP-MIB::snBgp4RouteMapMatchMapName,OCTET,read-only,,mandatory,,An octet string of the route-map name, each character of the name is represented by one octet.
.1.3.6.1.4.1.11.2.3.7.11.12.2.11.13.1.1.2,HP-SN-BGP4-GROUP-MIB::snBgp4RouteMapMatchSequenceNum,INTEGER,read-only,,mandatory,,A sequence number for this particular route-map.
.1.3.6.1.4.1.11.2.3.7.11.12.2.11.13.1.1.3,HP-SN-BGP4-GROUP-MIB::snBgp4RouteMapMatchAsPathFilter,OCTET,read-write,,mandatory,,A number from 1 to 0xFFFF and there are 10 of 2 OCTETs.  To match a BGP autonomous system path access list.
.1.3.6.1.4.1.11.2.3.7.11.12.2.11.13.1.1.4,HP-SN-BGP4-GROUP-MIB::snBgp4RouteMapMatchCommunityFilter,OCTET,read-write,,mandatory,,A number from 1 to 0xFFFF and there are 10 of 2 OCTETs.  To match a BGP community access list.
.1.3.6.1.4.1.11.2.3.7.11.12.2.11.13.1.1.5,HP-SN-BGP4-GROUP-MIB::snBgp4RouteMapMatchAddressFilter,OCTET,read-write,,mandatory,,A number from 1 to 0xFFFF and there are 10 of 2 OCTETs.  To match a BGP address access list.
.1.3.6.1.4.1.11.2.3.7.11.12.2.11.13.1.1.6,HP-SN-BGP4-GROUP-MIB::snBgp4RouteMapMatchMetric,INTEGER,read-write,,mandatory,,To match a metric for BGP routes.
.1.3.6.1.4.1.11.2.3.7.11.12.2.11.13.1.1.7,HP-SN-BGP4-GROUP-MIB::snBgp4RouteMapMatchNextHopList,OCTET,read-write,,mandatory,,A number from 1 to 0xFFFF and there are 16 of 2 OCTETs.  To match a BGP next-hop access list.
.1.3.6.1.4.1.11.2.3.7.11.12.2.11.13.1.1.8,HP-SN-BGP4-GROUP-MIB::snBgp4RouteMapMatchRouteType,INTEGER,read-write,,mandatory,none(0):external(1):externalType1(2):externalType2(3):internal(4):local(5),To match a route-type.  Currently only externalType1(2),  externalType2(3), internal(4) is supported for SNMP-SET.
.1.3.6.1.4.1.11.2.3.7.11.12.2.11.13.1.1.9,HP-SN-BGP4-GROUP-MIB::snBgp4RouteMapMatchTagList,OCTET,read-write,,mandatory,,To match a BGP tag access list.
.1.3.6.1.4.1.11.2.3.7.11.12.2.11.13.1.1.10,HP-SN-BGP4-GROUP-MIB::snBgp4RouteMapMatchRowMask,INTEGER,read-write,,mandatory,,This object is used together with above
.1.3.6.1.4.1.11.2.3.7.11.12.2.11.13.1.1.11,HP-SN-BGP4-GROUP-MIB::snBgp4RouteMapMatchAsPathAccessList,OCTET,read-write,,mandatory,,A number from 1 to 0xFFFFFFFF and there are 5 of 4 OCTETs.  To match a BGP autonomous system path access list.
.1.3.6.1.4.1.11.2.3.7.11.12.2.11.13.1.1.12,HP-SN-BGP4-GROUP-MIB::snBgp4RouteMapMatchCommunityList,OCTET,read-write,,mandatory,,A number from 1 to 0xFFFFFFFF and there are 5 of 4 OCTETs.  To match a BGP community access list.
.1.3.6.1.4.1.11.2.3.7.11.12.2.11.13.1.1.13,HP-SN-BGP4-GROUP-MIB::snBgp4RouteMapMatchAddressAccessList,OCTET,read-write,,mandatory,,A number from 1 to 0xFFFF and there are 5 of 2 OCTETs.  To match a BGP address access list.
.1.3.6.1.4.1.11.2.3.7.11.12.2.11.13.1.1.14,HP-SN-BGP4-GROUP-MIB::snBgp4RouteMapMatchAddressPrefixList,OCTET,read-write,,mandatory,,Prefix list  To match a BGP address access list.
.1.3.6.1.4.1.11.2.3.7.11.12.2.11.13.1.1.15,HP-SN-BGP4-GROUP-MIB::snBgp4RouteMapMatchNextHopAccessList,OCTET,read-write,,mandatory,,A number from 1 to 0xFFFF and there are 5 of 2 OCTETs.  To match a BGP address access list.
.1.3.6.1.4.1.11.2.3.7.11.12.2.11.13.1.1.16,HP-SN-BGP4-GROUP-MIB::snBgp4RouteMapMatchNextHopPrefixList,OCTET,read-write,,mandatory,,Prefix list  To match a BGP address access list.
.1.3.6.1.4.1.11.2.3.7.11.12.2.11.14,HP-SN-BGP4-GROUP-MIB::snBgp4RouteMapSet,,,,,,
.1.3.6.1.4.1.11.2.3.7.11.12.2.11.14.1,HP-SN-BGP4-GROUP-MIB::snBgp4RouteMapSetTable,,not-accessible,,mandatory,,Bgp4 Route Map Set table.
.1.3.6.1.4.1.11.2.3.7.11.12.2.11.14.1.1,HP-SN-BGP4-GROUP-MIB::snBgp4RouteMapSetEntry,,not-accessible,snBgp4RouteMapSetMapName:snBgp4RouteMapSetSequenceNum,mandatory,,An entry in the Bgp4 Route Map Set table.
.1.3.6.1.4.1.11.2.3.7.11.12.2.11.14.1.1.1,HP-SN-BGP4-GROUP-MIB::snBgp4RouteMapSetMapName,OCTET,read-only,,mandatory,,An octet string of the route-map name, each character of the name is represented by one octet.
.1.3.6.1.4.1.11.2.3.7.11.12.2.11.14.1.1.2,HP-SN-BGP4-GROUP-MIB::snBgp4RouteMapSetSequenceNum,INTEGER,read-only,,mandatory,,A sequence number for this particular route-map.
.1.3.6.1.4.1.11.2.3.7.11.12.2.11.14.1.1.3,HP-SN-BGP4-GROUP-MIB::snBgp4RouteMapSetAsPathType,INTEGER,read-write,,mandatory,tag(0):prepend(1),To modify an autonomous system path for BGP routes.  tag(0) - Converts the tag of a route into an autonomous system path. prepend(1) - Appends the string from snBgp4RouteMapSetAsPathString to the  as-path of the route that is matched by the route map.
.1.3.6.1.4.1.11.2.3.7.11.12.2.11.14.1.1.4,HP-SN-BGP4-GROUP-MIB::snBgp4RouteMapSetAsPathString,OCTET,read-write,,mandatory,,as-path string. This string is used if only if the snBgp4RouteMapSetAsPathCmd
.1.3.6.1.4.1.11.2.3.7.11.12.2.11.14.1.1.5,HP-SN-BGP4-GROUP-MIB::snBgp4RouteMapSetAutoTag,INTEGER,read-write,,mandatory,disabled(0):enabled(1),To enable/disable the automatic-tag for BGP routes.
.1.3.6.1.4.1.11.2.3.7.11.12.2.11.14.1.1.6,HP-SN-BGP4-GROUP-MIB::snBgp4RouteMapSetCommunityType,INTEGER,read-write,,mandatory,nums(0):none(3),To set the BGP COMMUNITIES attribute. none means no other
.1.3.6.1.4.1.11.2.3.7.11.12.2.11.14.1.1.7,HP-SN-BGP4-GROUP-MIB::snBgp4RouteMapSetCommunityNum,INTEGER,read-write,,deprecated,,community-number. This number is used if only if the snBgp4RouteMapSetCommunityCmd
.1.3.6.1.4.1.11.2.3.7.11.12.2.11.14.1.1.8,HP-SN-BGP4-GROUP-MIB::snBgp4RouteMapSetCommunityAdditive,INTEGER,read-write,,mandatory,disabled(0):enabled(1),To add the community to the already existing communities.
.1.3.6.1.4.1.11.2.3.7.11.12.2.11.14.1.1.9,HP-SN-BGP4-GROUP-MIB::snBgp4RouteMapSetLocalPreference,INTEGER,read-write,,mandatory,,To modify a local-preference for BGP routes.
.1.3.6.1.4.1.11.2.3.7.11.12.2.11.14.1.1.10,HP-SN-BGP4-GROUP-MIB::snBgp4RouteMapSetMetric,INTEGER,read-write,,mandatory,,To modify a metric for BGP routes.
.1.3.6.1.4.1.11.2.3.7.11.12.2.11.14.1.1.11,HP-SN-BGP4-GROUP-MIB::snBgp4RouteMapSetNextHop,IpAddress,read-write,,mandatory,,To modify the IP address of the next hop for BGP routes.
.1.3.6.1.4.1.11.2.3.7.11.12.2.11.14.1.1.12,HP-SN-BGP4-GROUP-MIB::snBgp4RouteMapSetOrigin,INTEGER,read-write,,mandatory,igp(0):egp(1):incomplete(2),To set the BGP origin code.
.1.3.6.1.4.1.11.2.3.7.11.12.2.11.14.1.1.13,HP-SN-BGP4-GROUP-MIB::snBgp4RouteMapSetTag,INTEGER,read-write,,mandatory,,To specify the tag for BGP routes.
.1.3.6.1.4.1.11.2.3.7.11.12.2.11.14.1.1.14,HP-SN-BGP4-GROUP-MIB::snBgp4RouteMapSetWeight,INTEGER,read-write,,mandatory,,To specify the BGP weight for the routing table.
.1.3.6.1.4.1.11.2.3.7.11.12.2.11.14.1.1.15,HP-SN-BGP4-GROUP-MIB::snBgp4RouteMapSetRowMask,INTEGER,read-write,,mandatory,,This object is used together with above
.1.3.6.1.4.1.11.2.3.7.11.12.2.11.14.1.1.16,HP-SN-BGP4-GROUP-MIB::snBgp4RouteMapSetCommunityNums,OCTET,read-write,,mandatory,,Community number is from 1 to 0xFFFFFFFF. There are 6 of them. 
.1.3.6.1.4.1.11.2.3.7.11.12.2.11.14.1.1.17,HP-SN-BGP4-GROUP-MIB::snBgp4RouteMapSetDampenHalfLife,INTEGER,read-write,,mandatory,,Bgp4 Route Map Dampening Half Life.
.1.3.6.1.4.1.11.2.3.7.11.12.2.11.14.1.1.18,HP-SN-BGP4-GROUP-MIB::snBgp4RouteMapSetDampenReuse,INTEGER,read-write,,mandatory,,Bgp4 Route Map Dampening Reuse.
.1.3.6.1.4.1.11.2.3.7.11.12.2.11.14.1.1.19,HP-SN-BGP4-GROUP-MIB::snBgp4RouteMapSetDampenSuppress,INTEGER,read-write,,mandatory,,Bgp4 Route Map Dampening Suppress.
.1.3.6.1.4.1.11.2.3.7.11.12.2.11.14.1.1.20,HP-SN-BGP4-GROUP-MIB::snBgp4RouteMapSetDampenMaxSuppress,INTEGER,read-write,,mandatory,,Bgp4 Route Map Dampening Max Suppress Time.
.1.3.6.1.4.1.11.2.3.7.11.12.2.11.15,HP-SN-BGP4-GROUP-MIB::snBgp4NeighOperStatus,,,,,,
.1.3.6.1.4.1.11.2.3.7.11.12.2.11.15.1,HP-SN-BGP4-GROUP-MIB::snBgp4NeighOperStatusTable,,not-accessible,,mandatory,,Bgp4 Neighbor Operational Status table.
.1.3.6.1.4.1.11.2.3.7.11.12.2.11.15.1.1,HP-SN-BGP4-GROUP-MIB::snBgp4NeighOperStatusEntry,,not-accessible,snBgp4NeighOperStatusIndex,mandatory,,An entry in the Bgp4 Operational Status table.
.1.3.6.1.4.1.11.2.3.7.11.12.2.11.15.1.1.1,HP-SN-BGP4-GROUP-MIB::snBgp4NeighOperStatusIndex,INTEGER,read-only,,mandatory,,The index for a neighbor entry.
.1.3.6.1.4.1.11.2.3.7.11.12.2.11.15.1.1.2,HP-SN-BGP4-GROUP-MIB::snBgp4NeighOperStatusIp,IpAddress,read-only,,mandatory,,The IP Address for a neighbor entry.
.1.3.6.1.4.1.11.2.3.7.11.12.2.11.15.1.1.3,HP-SN-BGP4-GROUP-MIB::snBgp4NeighOperStatusRemoteAs,INTEGER,read-only,,mandatory,,To show a neighbor with an autonomous system number(AS).
.1.3.6.1.4.1.11.2.3.7.11.12.2.11.15.1.1.4,HP-SN-BGP4-GROUP-MIB::snBgp4NeighOperStatusBgpType,INTEGER,read-only,,mandatory,ebgp(0):ibgp(1),To show the type of BGP protocol whether is internal or external.
.1.3.6.1.4.1.11.2.3.7.11.12.2.11.15.1.1.5,HP-SN-BGP4-GROUP-MIB::snBgp4NeighOperStatusState,INTEGER,read-only,,mandatory,noState(0):idle(1):connect(2):active(3):openSent(4):openConfirm(5):established(6),To show the state of this neighbor.
.1.3.6.1.4.1.11.2.3.7.11.12.2.11.15.1.1.6,HP-SN-BGP4-GROUP-MIB::snBgp4NeighOperStatusKeepAliveTime,INTEGER,read-only,,mandatory,,The Keep alive timer.
.1.3.6.1.4.1.11.2.3.7.11.12.2.11.15.1.1.7,HP-SN-BGP4-GROUP-MIB::snBgp4NeighOperStatusHoldTime,INTEGER,read-only,,mandatory,,The Hold time timer.
.1.3.6.1.4.1.11.2.3.7.11.12.2.11.15.1.1.8,HP-SN-BGP4-GROUP-MIB::snBgp4NeighOperStatusAdvertlevel,INTEGER,read-only,,mandatory,,To show the minimum interval between the 
.1.3.6.1.4.1.11.2.3.7.11.12.2.11.15.1.1.9,HP-SN-BGP4-GROUP-MIB::snBgp4NeighOperStatusKeepAliveTxCounts,Counter32,read-only,,mandatory,,Keep alive message sent counts.
.1.3.6.1.4.1.11.2.3.7.11.12.2.11.15.1.1.10,HP-SN-BGP4-GROUP-MIB::snBgp4NeighOperStatusKeepAliveRxCounts,Counter32,read-only,,mandatory,,Keep alive message received counts.
.1.3.6.1.4.1.11.2.3.7.11.12.2.11.15.1.1.11,HP-SN-BGP4-GROUP-MIB::snBgp4NeighOperStatusUpdateTxCounts,Counter32,read-only,,mandatory,,Update message sent counts.
.1.3.6.1.4.1.11.2.3.7.11.12.2.11.15.1.1.12,HP-SN-BGP4-GROUP-MIB::snBgp4NeighOperStatusUpdateRxCounts,Counter32,read-only,,mandatory,,Update message received counts.
.1.3.6.1.4.1.11.2.3.7.11.12.2.11.15.1.1.13,HP-SN-BGP4-GROUP-MIB::snBgp4NeighOperStatusNotifTxCounts,Counter32,read-only,,mandatory,,Notification message sent counts.
.1.3.6.1.4.1.11.2.3.7.11.12.2.11.15.1.1.14,HP-SN-BGP4-GROUP-MIB::snBgp4NeighOperStatusNotifRxCounts,Counter32,read-only,,mandatory,,Notification message received counts.
.1.3.6.1.4.1.11.2.3.7.11.12.2.11.15.1.1.15,HP-SN-BGP4-GROUP-MIB::snBgp4NeighOperStatusOpenTxCounts,Counter32,read-only,,mandatory,,Open message sent counts.
.1.3.6.1.4.1.11.2.3.7.11.12.2.11.15.1.1.16,HP-SN-BGP4-GROUP-MIB::snBgp4NeighOperStatusOpenRxCounts,Counter32,read-only,,mandatory,,Open message received counts.
.1.3.6.1.4.1.11.2.3.7.11.12.2.11.16,HP-SN-BGP4-GROUP-MIB::snBgp4RouteOperStatus,,,,,,
.1.3.6.1.4.1.11.2.3.7.11.12.2.11.16.1,HP-SN-BGP4-GROUP-MIB::snBgp4RouteOperStatusTable,,not-accessible,,mandatory,,Bgp4 Routebor Operational Status table.
.1.3.6.1.4.1.11.2.3.7.11.12.2.11.16.1.1,HP-SN-BGP4-GROUP-MIB::snBgp4RouteOperStatusEntry,,not-accessible,snBgp4RouteOperStatusIndex,mandatory,,An entry in the Bgp4 Operational Status table.
.1.3.6.1.4.1.11.2.3.7.11.12.2.11.16.1.1.1,HP-SN-BGP4-GROUP-MIB::snBgp4RouteOperStatusIndex,INTEGER,read-only,,mandatory,,The index for a route entry.
.1.3.6.1.4.1.11.2.3.7.11.12.2.11.16.1.1.2,HP-SN-BGP4-GROUP-MIB::snBgp4RouteOperStatusIp,IpAddress,read-only,,mandatory,,The IP Address for a route entry.
.1.3.6.1.4.1.11.2.3.7.11.12.2.11.16.1.1.3,HP-SN-BGP4-GROUP-MIB::snBgp4RouteOperStatusSubnetMask,IpAddress,read-only,,mandatory,,The IP Subnet Mask for a route entry.
.1.3.6.1.4.1.11.2.3.7.11.12.2.11.16.1.1.4,HP-SN-BGP4-GROUP-MIB::snBgp4RouteOperStatusNextHop,IpAddress,read-only,,mandatory,,The next-hop IP for a route entry.
.1.3.6.1.4.1.11.2.3.7.11.12.2.11.16.1.1.5,HP-SN-BGP4-GROUP-MIB::snBgp4RouteOperStatusMetric,INTEGER,read-only,,mandatory,,To show the metric value of a route entry.
.1.3.6.1.4.1.11.2.3.7.11.12.2.11.16.1.1.6,HP-SN-BGP4-GROUP-MIB::snBgp4RouteOperStatusLocalPreference,INTEGER,read-only,,mandatory,,To show the local preference of a route entry.
.1.3.6.1.4.1.11.2.3.7.11.12.2.11.16.1.1.7,HP-SN-BGP4-GROUP-MIB::snBgp4RouteOperStatusWeight,INTEGER,read-only,,mandatory,,To show the weight of this route.
.1.3.6.1.4.1.11.2.3.7.11.12.2.11.16.1.1.8,HP-SN-BGP4-GROUP-MIB::snBgp4RouteOperStatusOrigin,INTEGER,read-only,,mandatory,igp(0):egp(1):incomplete(2),To show the origin of this route.
.1.3.6.1.4.1.11.2.3.7.11.12.2.11.16.1.1.9,HP-SN-BGP4-GROUP-MIB::snBgp4RouteOperStatusStatus,INTEGER,read-only,,mandatory,,A bit array that contains the status of this route. This is a packed bit string; The following shows the meaning of each bit:
.1.3.6.1.4.1.11.2.3.7.11.12.2.11.16.1.1.10,HP-SN-BGP4-GROUP-MIB::snBgp4RouteOperStatusRouteTag,INTEGER,read-only,,mandatory,,To show the route tag of this route.
.1.3.6.1.4.1.11.2.3.7.11.12.2.11.16.1.1.11,HP-SN-BGP4-GROUP-MIB::snBgp4RouteOperStatusCommunityList,OCTET,read-only,,mandatory,,To show the community list of this route. If the community list is an NULL string that means an empty list, then the community is INTERNET. A number from 1 to 0xFFFFFFFF.  In the community list, it could have some Well-known numbers such as:  BGP_COMMUNITY_ATTRIBUTE_NO_EXPORT 0xFFFFFF01
.1.3.6.1.4.1.11.2.3.7.11.12.2.11.16.1.1.12,HP-SN-BGP4-GROUP-MIB::snBgp4RouteOperStatusAsPathList,OCTET,read-only,,mandatory,,To show the AS Path list of this route. A number from 1 to 0xFFFF. 
.1.3.6.1.4.1.11.2.3.7.11.12.2.11.17,HP-SN-BGP4-GROUP-MIB::snBgp4NeighborSummary,,,,,,
.1.3.6.1.4.1.11.2.3.7.11.12.2.11.17.1,HP-SN-BGP4-GROUP-MIB::snBgp4NeighborSummaryTable,,not-accessible,,mandatory,,Bgp4 Routebor Operational Status table.
.1.3.6.1.4.1.11.2.3.7.11.12.2.11.17.1.1,HP-SN-BGP4-GROUP-MIB::snBgp4NeighborSummaryEntry,,not-accessible,snBgp4NeighborSummaryIndex,mandatory,,An entry in the Bgp4 Operational Status table.
.1.3.6.1.4.1.11.2.3.7.11.12.2.11.17.1.1.1,HP-SN-BGP4-GROUP-MIB::snBgp4NeighborSummaryIndex,INTEGER,read-only,,mandatory,,The index for a route entry.
.1.3.6.1.4.1.11.2.3.7.11.12.2.11.17.1.1.2,HP-SN-BGP4-GROUP-MIB::snBgp4NeighborSummaryIp,IpAddress,read-only,,mandatory,,The IP Address for a route entry.
.1.3.6.1.4.1.11.2.3.7.11.12.2.11.17.1.1.3,HP-SN-BGP4-GROUP-MIB::snBgp4NeighborSummaryState,INTEGER,read-only,,mandatory,noState(0):idle(1):connect(2):active(3):openSent(4):openConfirm(5):established(6),To show the state of this neighbor.
.1.3.6.1.4.1.11.2.3.7.11.12.2.11.17.1.1.4,HP-SN-BGP4-GROUP-MIB::snBgp4NeighborSummaryStateChgTime,INTEGER,read-only,,mandatory,,The time of a change of the state of this neighbor.
.1.3.6.1.4.1.11.2.3.7.11.12.2.11.17.1.1.5,HP-SN-BGP4-GROUP-MIB::snBgp4NeighborSummaryRouteReceived,INTEGER,read-only,,mandatory,,The number of routes received of this neighbor.
.1.3.6.1.4.1.11.2.3.7.11.12.2.11.17.1.1.6,HP-SN-BGP4-GROUP-MIB::snBgp4NeighborSummaryRouteInstalled,INTEGER,read-only,,mandatory,,The number of routes installed of this neighbor.
.1.3.6.1.4.1.11.2.3.7.11.12.2.11.18,HP-SN-BGP4-GROUP-MIB::snBgp4Attribute,,,,,,
.1.3.6.1.4.1.11.2.3.7.11.12.2.11.18.1,HP-SN-BGP4-GROUP-MIB::snBgp4AttributeTable,,not-accessible,,mandatory,,Bgp4 Attribute entries table.
.1.3.6.1.4.1.11.2.3.7.11.12.2.11.18.1.1,HP-SN-BGP4-GROUP-MIB::snBgp4AttributeEntry,,not-accessible,snBgp4AttributeIndex,mandatory,,An entry in the Bgp4 Attribute table.
.1.3.6.1.4.1.11.2.3.7.11.12.2.11.18.1.1.1,HP-SN-BGP4-GROUP-MIB::snBgp4AttributeIndex,INTEGER,read-only,,mandatory,,The index for a route entry.
.1.3.6.1.4.1.11.2.3.7.11.12.2.11.18.1.1.2,HP-SN-BGP4-GROUP-MIB::snBgp4AttributeNextHop,IpAddress,read-only,,mandatory,,The next-hop IP for a route entry.
.1.3.6.1.4.1.11.2.3.7.11.12.2.11.18.1.1.3,HP-SN-BGP4-GROUP-MIB::snBgp4AttributeMetric,INTEGER,read-only,,mandatory,,To show the metric value of a route entry.
.1.3.6.1.4.1.11.2.3.7.11.12.2.11.18.1.1.4,HP-SN-BGP4-GROUP-MIB::snBgp4AttributeOrigin,INTEGER,read-only,,mandatory,igp(0):egp(1):incomplete(2),To show the origin of this route.
.1.3.6.1.4.1.11.2.3.7.11.12.2.11.18.1.1.5,HP-SN-BGP4-GROUP-MIB::snBgp4AttributeAggregatorAs,INTEGER,read-only,,mandatory,,The aggregator AS number for an attribute entry.
.1.3.6.1.4.1.11.2.3.7.11.12.2.11.18.1.1.6,HP-SN-BGP4-GROUP-MIB::snBgp4AttributeRouterId,IpAddress,read-only,,mandatory,,The router ID for an attribute entry.
.1.3.6.1.4.1.11.2.3.7.11.12.2.11.18.1.1.7,HP-SN-BGP4-GROUP-MIB::snBgp4AttributeAtomicAggregatePresent,INTEGER,read-only,,mandatory,false(0):true(1),The atomic aggregate present in an attribute entry.
.1.3.6.1.4.1.11.2.3.7.11.12.2.11.18.1.1.8,HP-SN-BGP4-GROUP-MIB::snBgp4AttributeLocalPreference,INTEGER,read-only,,mandatory,,To show the local preference of a route entry.
.1.3.6.1.4.1.11.2.3.7.11.12.2.11.18.1.1.9,HP-SN-BGP4-GROUP-MIB::snBgp4AttributeCommunityList,OCTET,read-only,,mandatory,,To show the community list of this attribute entry. If the community list is an NULL string that means an empty list, then the community is INTERNET. A number from 1 to 0xFFFFFFFF.  In the community list, it could have some Well-known numbers such as:  BGP_COMMUNITY_ATTRIBUTE_NO_EXPORT 0xFFFFFF01
.1.3.6.1.4.1.11.2.3.7.11.12.2.11.18.1.1.10,HP-SN-BGP4-GROUP-MIB::snBgp4AttributeAsPathList,OCTET,read-only,,mandatory,,To show the AS Path list of this attribute entry. A number from 1 to 0xFFFF. 
.1.3.6.1.4.1.11.2.3.7.11.12.2.11.18.1.1.11,HP-SN-BGP4-GROUP-MIB::snBgp4AttributeOriginator,IpAddress,read-only,,mandatory,,The originator IP address for an attribute entry.
.1.3.6.1.4.1.11.2.3.7.11.12.2.11.18.1.1.12,HP-SN-BGP4-GROUP-MIB::snBgp4AttributeClusterList,OCTET,read-only,,mandatory,,To show the cluster list of this attribute entry. If the cluster list is an NULL string, it means an empty list.  Otherwise, the list is a group of cluster ID which is represented by 4 OCTETs IP address.
.1.3.6.1.4.1.11.2.3.7.11.12.2.11.19,HP-SN-BGP4-GROUP-MIB::snBgp4ClearNeighborCmd,,,,,,
.1.3.6.1.4.1.11.2.3.7.11.12.2.11.19.1,HP-SN-BGP4-GROUP-MIB::snBgp4ClearNeighborCmdTable,,not-accessible,,mandatory,,Clear Bgp4 command table.
.1.3.6.1.4.1.11.2.3.7.11.12.2.11.19.1.1,HP-SN-BGP4-GROUP-MIB::snBgp4ClearNeighborCmdEntry,,not-accessible,snBgp4ClearNeighborCmdIp,mandatory,,An entry in the clear Bgp4 neighbor command table.
.1.3.6.1.4.1.11.2.3.7.11.12.2.11.19.1.1.1,HP-SN-BGP4-GROUP-MIB::snBgp4ClearNeighborCmdIp,IpAddress,read-only,,mandatory,,The IP Address for a neighbor entry. 
.1.3.6.1.4.1.11.2.3.7.11.12.2.11.19.1.1.2,HP-SN-BGP4-GROUP-MIB::snBgp4ClearNeighborCmdElement,INTEGER,read-write,,mandatory,valid(0):lastPacketWithError(1):notificationErrors(2):softOutbound(3):traffic(4):neighbor(5),To send the command element of this neighbor for value(1) to (5)
.1.3.6.1.4.1.11.2.3.7.11.12.2.11.20,HP-SN-BGP4-GROUP-MIB::snBgp4NeighPrefixGroup,,,,,,
.1.3.6.1.4.1.11.2.3.7.11.12.2.11.20.1,HP-SN-BGP4-GROUP-MIB::snBgp4NeighPrefixGroupTable,,not-accessible,,mandatory,,Bgp4 Neighbor Prefix Group table.
.1.3.6.1.4.1.11.2.3.7.11.12.2.11.20.1.1,HP-SN-BGP4-GROUP-MIB::snBgp4NeighPrefixGroupEntry,,not-accessible,snBgp4NeighPrefixGroupNeighIp:snBgp4NeighPrefixGroupDir,mandatory,,An entry in the Bgp4 Prefix Group table.
.1.3.6.1.4.1.11.2.3.7.11.12.2.11.20.1.1.1,HP-SN-BGP4-GROUP-MIB::snBgp4NeighPrefixGroupNeighIp,IpAddress,read-only,,mandatory,,The IP Address for a neighbor entry.
.1.3.6.1.4.1.11.2.3.7.11.12.2.11.20.1.1.2,HP-SN-BGP4-GROUP-MIB::snBgp4NeighPrefixGroupDir,INTEGER,read-only,,mandatory,out(0):in(1),The incoming/outgoing advertisements to which 
.1.3.6.1.4.1.11.2.3.7.11.12.2.11.20.1.1.3,HP-SN-BGP4-GROUP-MIB::snBgp4NeighPrefixGroupInAccessList,OCTET,read-write,,mandatory,,An in access prefix list name. 
.1.3.6.1.4.1.11.2.3.7.11.12.2.11.20.1.1.4,HP-SN-BGP4-GROUP-MIB::snBgp4NeighPrefixGroupOutAccessList,OCTET,read-write,,mandatory,,An out prefix list name. 
.1.3.6.1.4.1.11.2.3.7.11.12.2.11.20.1.1.5,HP-SN-BGP4-GROUP-MIB::snBgp4NeighPrefixGroupRowStatus,INTEGER,read-write,,mandatory,invalid(1):valid(2):delete(3):create(4):modify(5),This object is used to create and
.1.3.6.1.4.1.11.2.3.7.11.12.2.12,HP-SN-ROOT-MIB::snVrrp,,,,,,
.1.3.6.1.4.1.11.2.3.7.11.12.2.12.1,HP-SN-IP-VRRP-MIB::snVrrpGlobal,,,,,,
.1.3.6.1.4.1.11.2.3.7.11.12.2.12.1.1,HP-SN-IP-VRRP-MIB::snVrrpGroupOperMode,INTEGER,read-write,,mandatory,disabled(0):enabled(1),The VRRP is configured on this system
.1.3.6.1.4.1.11.2.3.7.11.12.2.12.1.2,HP-SN-IP-VRRP-MIB::snVrrpIfStateChangeTrap,INTEGER,read-write,,mandatory,disabled(0):enabled(1),Indicates whether the SNMP agent process is
.1.3.6.1.4.1.11.2.3.7.11.12.2.12.1.3,HP-SN-IP-VRRP-MIB::snVrrpIfMaxNumVridPerIntf,INTEGER,read-only,,mandatory,,Indicates the maximum number of VRID per interface.
.1.3.6.1.4.1.11.2.3.7.11.12.2.12.1.4,HP-SN-IP-VRRP-MIB::snVrrpIfMaxNumVridPerSystem,INTEGER,read-only,,mandatory,,Indicates the maximum number of VRID per system.
.1.3.6.1.4.1.11.2.3.7.11.12.2.12.1.5,HP-SN-IP-VRRP-MIB::snVrrpClearVrrpStat,INTEGER,read-write,,mandatory,normal(0):clear(1),Clear VRRP statistics command.
.1.3.6.1.4.1.11.2.3.7.11.12.2.12.1.6,HP-SN-IP-VRRP-MIB::snVrrpGroupOperModeVrrpextended,INTEGER,read-write,,mandatory,disabled(0):enabled(1),The VRRP_extended is configured on this system either enabled  or disabled and the default is disabled mode.
.1.3.6.1.4.1.11.2.3.7.11.12.2.12.2,HP-SN-IP-VRRP-MIB::snVrrpIntf,,,,,,
.1.3.6.1.4.1.11.2.3.7.11.12.2.12.2.1,HP-SN-IP-VRRP-MIB::snVrrpIfTable,,not-accessible,,deprecated,,The VRRP Interface Table describes the interfaces from the viewpoint of VRRP.
.1.3.6.1.4.1.11.2.3.7.11.12.2.12.2.1.1,HP-SN-IP-VRRP-MIB::snVrrpIfEntry,,not-accessible,snVrrpIfPort,deprecated,,The VRRP Interface Entry describes one interface from the viewpoint of VRRP.
.1.3.6.1.4.1.11.2.3.7.11.12.2.12.2.1.1.1,HP-SN-IP-VRRP-MIB::snVrrpIfPort,INTEGER,read-only,,deprecated,,The IP port of this VRRP interface.
.1.3.6.1.4.1.11.2.3.7.11.12.2.12.2.1.1.2,HP-SN-IP-VRRP-MIB::snVrrpIfAuthType,INTEGER,read-write,,deprecated,noAuth(0):simpleTextPasswd(1):ipAuthHeader(2),The authentication type of this interface.
.1.3.6.1.4.1.11.2.3.7.11.12.2.12.2.1.1.3,HP-SN-IP-VRRP-MIB::snVrrpIfAuthPassword,OCTET,read-write,,deprecated,,The simple text password is allowed if only if  the snVrrpIfAuthType type is simpleTextPasswd(1).
.1.3.6.1.4.1.11.2.3.7.11.12.2.12.2.1.1.4,HP-SN-IP-VRRP-MIB::snVrrpIfRxHeaderErrCnts,Counter32,read-only,,deprecated,,The received Header error counts in this interface.
.1.3.6.1.4.1.11.2.3.7.11.12.2.12.2.1.1.5,HP-SN-IP-VRRP-MIB::snVrrpIfRxAuthTypeErrCnts,Counter32,read-only,,deprecated,,The received authentication type error counts in this interface.
.1.3.6.1.4.1.11.2.3.7.11.12.2.12.2.1.1.6,HP-SN-IP-VRRP-MIB::snVrrpIfRxAuthPwdMismatchErrCnts,Counter32,read-only,,deprecated,,The received authentication password mismatched error counts in this interface.
.1.3.6.1.4.1.11.2.3.7.11.12.2.12.2.1.1.7,HP-SN-IP-VRRP-MIB::snVrrpIfRxVridErrCnts,Counter32,read-only,,deprecated,,The received unfound VRID error counts in this interface.
.1.3.6.1.4.1.11.2.3.7.11.12.2.12.3,HP-SN-IP-VRRP-MIB::snVrrpVirRtr,,,,,,
.1.3.6.1.4.1.11.2.3.7.11.12.2.12.3.1,HP-SN-IP-VRRP-MIB::snVrrpVirRtrTable,,not-accessible,,deprecated,,The VRRP virtual router Entry describes one virtual router from the viewpoint of VRRP.
.1.3.6.1.4.1.11.2.3.7.11.12.2.12.3.1.1,HP-SN-IP-VRRP-MIB::snVrrpVirRtrEntry,,not-accessible,snVrrpVirRtrPort:snVrrpVirRtrId,deprecated,,The VRRP virtual router Entry describes one virtual router from the viewpoint of VRRP.
.1.3.6.1.4.1.11.2.3.7.11.12.2.12.3.1.1.1,HP-SN-IP-VRRP-MIB::snVrrpVirRtrPort,INTEGER,read-only,,deprecated,,The IP port of this VRRP interface.
.1.3.6.1.4.1.11.2.3.7.11.12.2.12.3.1.1.2,HP-SN-IP-VRRP-MIB::snVrrpVirRtrId,INTEGER,read-only,,deprecated,,One of the virtual router ID of this VRRP interface.
.1.3.6.1.4.1.11.2.3.7.11.12.2.12.3.1.1.3,HP-SN-IP-VRRP-MIB::snVrrpVirRtrOwnership,INTEGER,read-write,,deprecated,incomplete(0):owner(1):backup(2),The ownership of this VRRP router interface  can be set either owner(1) or backup(2).  VirRtr SNMP-GET returns incomplete(0), it means  no IP address has assigned to this VRRP router interface.
.1.3.6.1.4.1.11.2.3.7.11.12.2.12.3.1.1.4,HP-SN-IP-VRRP-MIB::snVrrpVirRtrCfgPriority,INTEGER,read-write,,deprecated,,The higher the number the higher the priority is. This parameter decides which backup router should becomes the Active Router for the interface. A backup Router with higher priority selected to becomes the Active Router. Therefore, this Object can be set if only if snVrrpVirRtrOwnership is set to backup(2).
.1.3.6.1.4.1.11.2.3.7.11.12.2.12.3.1.1.5,HP-SN-IP-VRRP-MIB::snVrrpVirRtrTrackPriority,INTEGER,read-write,,deprecated,,The higher the number the higher the priority is. after this object is configured, the snVrrpVirRtrCurrPriority  of this interface will be adjusted dynamically with this changes from UP to DOWN.
.1.3.6.1.4.1.11.2.3.7.11.12.2.12.3.1.1.6,HP-SN-IP-VRRP-MIB::snVrrpVirRtrCurrPriority,INTEGER,read-only,,deprecated,,The higher the number the higher the priority is. This object will be adjusted dynamically with the changes from UP to DOWN.
.1.3.6.1.4.1.11.2.3.7.11.12.2.12.3.1.1.7,HP-SN-IP-VRRP-MIB::snVrrpVirRtrHelloInt,INTEGER,read-write,,deprecated,,Time interval between advertisements (seconds).
.1.3.6.1.4.1.11.2.3.7.11.12.2.12.3.1.1.8,HP-SN-IP-VRRP-MIB::snVrrpVirRtrDeadInt,INTEGER,read-write,,deprecated,,Dead interval (seconds).
.1.3.6.1.4.1.11.2.3.7.11.12.2.12.3.1.1.9,HP-SN-IP-VRRP-MIB::snVrrpVirRtrPreemptMode,INTEGER,read-write,,deprecated,disabled(0):enabled(1),This mode controls whether a higher priority Backup router preempts a lower priority Master. The mode with enabled(1) allow preemption and disabled(0) prohibit preemption.
.1.3.6.1.4.1.11.2.3.7.11.12.2.12.3.1.1.10,HP-SN-IP-VRRP-MIB::snVrrpVirRtrState,INTEGER,read-only,,deprecated,init(0):master(1):backup(2),This object specifies the VRRP Router's interface state as: init(0)...initialization state. master(1)...master state. backup(2)...backup state.
.1.3.6.1.4.1.11.2.3.7.11.12.2.12.3.1.1.11,HP-SN-IP-VRRP-MIB::snVrrpVirRtrActivate,INTEGER,read-write,,deprecated,disabled(0):enabled(1),This object specifies the VRRP Router's activate command as: disabled(0)...deactivate this VRRP Router. enabled(1)....activate this VRRP Router.
.1.3.6.1.4.1.11.2.3.7.11.12.2.12.3.1.1.12,HP-SN-IP-VRRP-MIB::snVrrpVirRtrIpAddrMask,OCTET,read-write,,deprecated,,The numbers of IP Addresses of this virtual router of this interface.
.1.3.6.1.4.1.11.2.3.7.11.12.2.12.3.1.1.13,HP-SN-IP-VRRP-MIB::snVrrpVirRtrTrackPortMask,OCTET,read-write,,deprecated,,This object specifies the identity of the physical port The interface's Preference Level is reduced by value of  Preference Level parameter when the Track Port states first changes from UP to DOWN. When the Track Port next comes up the interface's Preference Level is increased by the amount specified by the Preference Level. The Chassis/Stackable router VRRP Track port membership. The size of the OCTET STRING for Chassis is 32. The size of the OCTET STRING for Stackable is 4. (It was obsoleted after release 07100, replaced by snVrrpVirRtrTrackPortList)
.1.3.6.1.4.1.11.2.3.7.11.12.2.12.3.1.1.14,HP-SN-IP-VRRP-MIB::snVrrpVirRtrTrackVifMask,OCTET,read-write,,deprecated,,This object specifies the identity of the virtual interface  whose state is to be monitored. Each bit is a port of The interface's Preference Level is reduced by value of  Preference Level parameter when the Track Port states first changes from UP to DOWN. When the Track Port next comes up the interface's Preference Level is increased by the amount specified by the Preference Level. The Chassis/Stackable router VRRP Track port membership The size of the OCTET STRING for Chassis is 8. The size of the OCTET STRING for Stackable is 4. (It was obsoleted after release 07100, replaced by snVrrpVirRtrTrackVifPortList)
.1.3.6.1.4.1.11.2.3.7.11.12.2.12.3.1.1.15,HP-SN-IP-VRRP-MIB::snVrrpVirRtrRowStatus,INTEGER,read-write,,deprecated,invalid(1):valid(2):delete(3):create(4):modify(5),This object is used to create and rendering it inoperative..
.1.3.6.1.4.1.11.2.3.7.11.12.2.12.3.1.1.16,HP-SN-IP-VRRP-MIB::snVrrpVirRtrRxArpPktDropCnts,Counter32,read-only,,deprecated,,The received VRRP ARP Packet Drop Counts.
.1.3.6.1.4.1.11.2.3.7.11.12.2.12.3.1.1.17,HP-SN-IP-VRRP-MIB::snVrrpVirRtrRxIpPktDropCnts,Counter32,read-only,,deprecated,,The received VRRP IP Packet Drop Counts.
.1.3.6.1.4.1.11.2.3.7.11.12.2.12.3.1.1.18,HP-SN-IP-VRRP-MIB::snVrrpVirRtrRxPortMismatchCnts,Counter32,read-only,,deprecated,,The received VRRP Port mismatching Counts.
.1.3.6.1.4.1.11.2.3.7.11.12.2.12.3.1.1.19,HP-SN-IP-VRRP-MIB::snVrrpVirRtrRxNumOfIpMismatchCnts,Counter32,read-only,,deprecated,,The received VRRP Number of IP Addresses mismatching Counts.
.1.3.6.1.4.1.11.2.3.7.11.12.2.12.3.1.1.20,HP-SN-IP-VRRP-MIB::snVrrpVirRtrRxIpMismatchCnts,Counter32,read-only,,deprecated,,The received VRRP IP Address mismatching Counts.
.1.3.6.1.4.1.11.2.3.7.11.12.2.12.3.1.1.21,HP-SN-IP-VRRP-MIB::snVrrpVirRtrRxHelloIntMismatchCnts,Counter32,read-only,,deprecated,,The counts of the virtual router interface with hello interval mismatch counts.
.1.3.6.1.4.1.11.2.3.7.11.12.2.12.3.1.1.22,HP-SN-IP-VRRP-MIB::snVrrpVirRtrRxPriorityZeroFromMasterCnts,Counter32,read-only,,deprecated,,The counts of the virtual router interface with Priority zero from the master.
.1.3.6.1.4.1.11.2.3.7.11.12.2.12.3.1.1.23,HP-SN-IP-VRRP-MIB::snVrrpVirRtrRxHigherPriorityCnts,Counter32,read-only,,deprecated,,The counts of the virtual router interface with higher Priority.
.1.3.6.1.4.1.11.2.3.7.11.12.2.12.3.1.1.24,HP-SN-IP-VRRP-MIB::snVrrpVirRtrTransToMasterStateCnts,Counter32,read-only,,deprecated,,The counts of the virtual router interface transition to master state.
.1.3.6.1.4.1.11.2.3.7.11.12.2.12.3.1.1.25,HP-SN-IP-VRRP-MIB::snVrrpVirRtrTransToBackupStateCnts,Counter32,read-only,,deprecated,,The counts of the virtual router interface transition to backup state.
.1.3.6.1.4.1.11.2.3.7.11.12.2.12.3.1.1.26,HP-SN-IP-VRRP-MIB::snVrrpVirRtrCurrDeadInt,INTEGER,read-only,,deprecated,,Current Dead interval (in 100 milliseconds).
.1.3.6.1.4.1.11.2.3.7.11.12.2.12.3.1.1.27,HP-SN-IP-VRRP-MIB::snVrrpVirRtrTrackPortList,OCTET,read-write,,deprecated,,This object specifies the identity of the physical port The interface's Preference Level is reduced by value of  Preference Level parameter when the Track Port states first changes from UP to DOWN. When the Track Port next comes up the interface's Preference Level is increased by the amount specified by the Preference Level. The router VRRP physical track port membership.
.1.3.6.1.4.1.11.2.3.7.11.12.2.12.3.1.1.28,HP-SN-IP-VRRP-MIB::snVrrpVirRtrTrackVifPortList,OCTET,read-write,,deprecated,,This object specifies the identity of the virtual interface  whose state is to be monitored. Each port index is a The interface's Preference Level is reduced by value of  Preference Level parameter when the Track Port states first changes from UP to DOWN. When the Track Port next comes up the interface's Preference Level is increased by the amount specified by the Preference Level. The router VRRP virtual port track membership.
.1.3.6.1.4.1.11.2.3.7.11.12.2.12.4,HP-SN-IP-VRRP-MIB::snVrrpIntf2,,,,,,
.1.3.6.1.4.1.11.2.3.7.11.12.2.12.4.1,HP-SN-IP-VRRP-MIB::snVrrpIf2Table,,not-accessible,,mandatory,,The VRRP and VRRPE Interface Table describes the interfaces from the viewpoint of VRRP and VRRPE.
.1.3.6.1.4.1.11.2.3.7.11.12.2.12.4.1.1,HP-SN-IP-VRRP-MIB::snVrrpIf2Entry,,not-accessible,ifIndex,mandatory,,The VRRP and VRRPE Interface Entry describes one interface from the viewpoint of VRRP and VRRPE.
.1.3.6.1.4.1.11.2.3.7.11.12.2.12.4.1.1.1,HP-SN-IP-VRRP-MIB::snVrrpIf2AuthType,INTEGER,read-write,,mandatory,noAuth(0):simpleTextPasswd(1):ipAuthHeader(2),The authentication type of this interface.
.1.3.6.1.4.1.11.2.3.7.11.12.2.12.4.1.1.2,HP-SN-IP-VRRP-MIB::snVrrpIf2AuthPassword,OCTET,read-write,,mandatory,,The simple text password is allowed if only if  the snVrrpIf2AuthType type is simpleTextPasswd(1).
.1.3.6.1.4.1.11.2.3.7.11.12.2.12.4.1.1.3,HP-SN-IP-VRRP-MIB::snVrrpIf2RxHeaderErrCnts,Counter32,read-only,,mandatory,,The received Header error counts in this interface.
.1.3.6.1.4.1.11.2.3.7.11.12.2.12.4.1.1.4,HP-SN-IP-VRRP-MIB::snVrrpIf2RxAuthTypeErrCnts,Counter32,read-only,,mandatory,,The received authentication type error counts in this interface.
.1.3.6.1.4.1.11.2.3.7.11.12.2.12.4.1.1.5,HP-SN-IP-VRRP-MIB::snVrrpIf2RxAuthPwdMismatchErrCnts,Counter32,read-only,,mandatory,,The received authentication password mismatched error counts in this interface.
.1.3.6.1.4.1.11.2.3.7.11.12.2.12.4.1.1.6,HP-SN-IP-VRRP-MIB::snVrrpIf2RxVridErrCnts,Counter32,read-only,,mandatory,,The received unfound VRID error counts in this interface.
.1.3.6.1.4.1.11.2.3.7.11.12.2.12.5,HP-SN-IP-VRRP-MIB::snVrrpVirRtr2,,,,,,
.1.3.6.1.4.1.11.2.3.7.11.12.2.12.5.1,HP-SN-IP-VRRP-MIB::snVrrpVirRtr2Table,,not-accessible,,mandatory,,The Vrrp and Vrrpe virtual router Entry describes one virtual router from the viewpoint of Vrrp and Vrrpe.
.1.3.6.1.4.1.11.2.3.7.11.12.2.12.5.1.1,HP-SN-IP-VRRP-MIB::snVrrpVirRtr2Entry,,not-accessible,ifIndex:snVrrpVirRtr2Id,mandatory,,The Vrrp and Vrrpe virtual router Entry describes one virtual router from the viewpoint of Vrrp and Vrrpe.
.1.3.6.1.4.1.11.2.3.7.11.12.2.12.5.1.1.1,HP-SN-IP-VRRP-MIB::snVrrpVirRtr2Id,INTEGER,read-only,,mandatory,,One of the virtual router ID of this Vrrp and Vrrpe interface.
.1.3.6.1.4.1.11.2.3.7.11.12.2.12.5.1.1.2,HP-SN-IP-VRRP-MIB::snVrrpVirRtr2Ownership,INTEGER,read-write,,mandatory,incomplete(0):owner(1):backup(2),The ownership of this Vrrp router interface  can be set either owner(1) or backup(2).  VirRtr SNMP-GET returns incomplete(0), it means  no IP address has assigned to this Vrrp router interface. vrrpe protocol has no owner(1), can only be set to backup(2) or incomplete(0).
.1.3.6.1.4.1.11.2.3.7.11.12.2.12.5.1.1.3,HP-SN-IP-VRRP-MIB::snVrrpVirRtr2CfgPriority,INTEGER,read-write,,mandatory,,This object specifies the priority to be used for the virtual router master election process. Higher values imply higher priority. A priority of '0', although not settable, is sent by the master router to indicate that this router has ceased to participate in VRRP and a backup virtual router should transition to become a new master. A priority of 255 is only for VRRP - owner. Not valid for number to  configure VRRPE.
.1.3.6.1.4.1.11.2.3.7.11.12.2.12.5.1.1.4,HP-SN-IP-VRRP-MIB::snVrrpVirRtr2TrackPriority,INTEGER,read-write,,mandatory,,The higher the number the higher the priority is. after this object is configured, the snVrrpVirRtr2CurrPriority  of this interface will be adjusted dynamically with this changes from UP to DOWN.
.1.3.6.1.4.1.11.2.3.7.11.12.2.12.5.1.1.5,HP-SN-IP-VRRP-MIB::snVrrpVirRtr2CurrPriority,INTEGER,read-only,,mandatory,,The higher the number the higher the priority is. This object will be adjusted dynamically with the changes from UP to DOWN.
.1.3.6.1.4.1.11.2.3.7.11.12.2.12.5.1.1.6,HP-SN-IP-VRRP-MIB::snVrrpVirRtr2HelloInt,INTEGER,read-write,,mandatory,,Time interval between advertisements (seconds).
.1.3.6.1.4.1.11.2.3.7.11.12.2.12.5.1.1.7,HP-SN-IP-VRRP-MIB::snVrrpVirRtr2DeadInt,INTEGER,read-write,,mandatory,,Dead interval (seconds).
.1.3.6.1.4.1.11.2.3.7.11.12.2.12.5.1.1.8,HP-SN-IP-VRRP-MIB::snVrrpVirRtr2PreemptMode,INTEGER,read-write,,mandatory,disabled(0):enabled(1),This mode controls whether a higher priority Backup router preempts a lower priority Master. The mode with enabled(1) allow preemption and disabled(0) prohibit preemption.
.1.3.6.1.4.1.11.2.3.7.11.12.2.12.5.1.1.9,HP-SN-IP-VRRP-MIB::snVrrpVirRtr2State,INTEGER,read-only,,mandatory,init(0):master(1):backup(2),This object specifies the Vrrp and vrrpe Router's interface state as: init(0)...initialization state. master(1)...master state. backup(2)...backup state.
.1.3.6.1.4.1.11.2.3.7.11.12.2.12.5.1.1.10,HP-SN-IP-VRRP-MIB::snVrrpVirRtr2IpAddrMask,OCTET,read-write,,mandatory,,The numbers of IP Addresses of this virtual router of this interface.
.1.3.6.1.4.1.11.2.3.7.11.12.2.12.5.1.1.11,HP-SN-IP-VRRP-MIB::snVrrpVirRtr2Activate,INTEGER,read-write,,mandatory,disabled(0):enabled(1),This object specifies the Vrrp Router's activate command as: disabled(0)...deactivate this Vrrp and Vrrpe Routers. enabled(1)....activate this Vrrp and Vrrpe Routers.
.1.3.6.1.4.1.11.2.3.7.11.12.2.12.5.1.1.12,HP-SN-IP-VRRP-MIB::snVrrpVirRtr2BackupInt,INTEGER,read-write,,mandatory,,Time interval between backup routers hello message advertisements (seconds).
.1.3.6.1.4.1.11.2.3.7.11.12.2.12.5.1.1.13,HP-SN-IP-VRRP-MIB::snVrrpVirRtr2RowStatus,INTEGER,read-write,,mandatory,invalid(1):valid(2):delete(3):create(4):modify(5),This object is used to create and rendering it inoperative..
.1.3.6.1.4.1.11.2.3.7.11.12.2.12.5.1.1.14,HP-SN-IP-VRRP-MIB::snVrrpVirRtr2RxArpPktDropCnts,Counter32,read-only,,mandatory,,The received Vrrp and Vrrpe ARP Packet Drop Counts.
.1.3.6.1.4.1.11.2.3.7.11.12.2.12.5.1.1.15,HP-SN-IP-VRRP-MIB::snVrrpVirRtr2RxIpPktDropCnts,Counter32,read-only,,mandatory,,The received Vrrp and Vrrpe IP Packet Drop Counts.
.1.3.6.1.4.1.11.2.3.7.11.12.2.12.5.1.1.16,HP-SN-IP-VRRP-MIB::snVrrpVirRtr2RxPortMismatchCnts,Counter32,read-only,,mandatory,,The received Vrrp and Vrrpe Port mismatching Counts.
.1.3.6.1.4.1.11.2.3.7.11.12.2.12.5.1.1.17,HP-SN-IP-VRRP-MIB::snVrrpVirRtr2RxNumOfIpMismatchCnts,Counter32,read-only,,mandatory,,The received Vrrp and Vrrpe Number of IP Addresses mismatching Counts.
.1.3.6.1.4.1.11.2.3.7.11.12.2.12.5.1.1.18,HP-SN-IP-VRRP-MIB::snVrrpVirRtr2RxIpMismatchCnts,Counter32,read-only,,mandatory,,The received Vrrp and Vrrpe IP Address mismatching Counts.
.1.3.6.1.4.1.11.2.3.7.11.12.2.12.5.1.1.19,HP-SN-IP-VRRP-MIB::snVrrpVirRtr2RxHelloIntMismatchCnts,Counter32,read-only,,mandatory,,The counts of the virtual router interface with hello interval mismatch counts.
.1.3.6.1.4.1.11.2.3.7.11.12.2.12.5.1.1.20,HP-SN-IP-VRRP-MIB::snVrrpVirRtr2RxPriorityZeroFromMasterCnts,Counter32,read-only,,mandatory,,The counts of the virtual router interface with Priority zero from the master.
.1.3.6.1.4.1.11.2.3.7.11.12.2.12.5.1.1.21,HP-SN-IP-VRRP-MIB::snVrrpVirRtr2RxHigherPriorityCnts,Counter32,read-only,,mandatory,,The counts of the virtual router interface with higher Priority.
.1.3.6.1.4.1.11.2.3.7.11.12.2.12.5.1.1.22,HP-SN-IP-VRRP-MIB::snVrrpVirRtr2TransToMasterStateCnts,Counter32,read-only,,mandatory,,The counts of the virtual router interface transition to master state.
.1.3.6.1.4.1.11.2.3.7.11.12.2.12.5.1.1.23,HP-SN-IP-VRRP-MIB::snVrrpVirRtr2TransToBackupStateCnts,Counter32,read-only,,mandatory,,The counts of the virtual router interface transition to backup state.
.1.3.6.1.4.1.11.2.3.7.11.12.2.12.5.1.1.24,HP-SN-IP-VRRP-MIB::snVrrpVirRtr2CurrDeadInt,INTEGER,read-only,,mandatory,,Current Dead interval (in 100 milliseconds).
.1.3.6.1.4.1.11.2.3.7.11.12.2.12.5.1.1.25,HP-SN-IP-VRRP-MIB::snVrrpVirRtr2TrackPortList,OCTET,read-write,,mandatory,,This object specifies the identity of the physical port and virtual ports Encoding and decoding scheme is range based: Each range prefix with 0000 (2 octets) where 0000 is not valid  ifIndex. Next 2 octets indicates lower range ifIndex, followed by 2  octets of higher range ifIndex. Individual(non range) ones will be displayed as it is. Ex: port list: 0001..0005 0015 0032..0047 Port list in PDU: 0000 0001 0005 000f 0000 0020 002f. The interface's Preference Level is reduced by value of  Preference Level parameter when the Track Port states first changes from UP to DOWN. When the Track Port next comes up the interface's Preference Level is increased by the amount specified by the Preference Level. The router VRRP and VRRP-E physical track port membership.
.1.3.6.1.4.1.11.2.3.7.11.12.2.12.5.1.1.26,HP-SN-IP-VRRP-MIB::snVrrpVirRtr2AdvertiseBackup,INTEGER,read-write,,mandatory,disabled(0):enabled(1),Set Advertise this backup router to master 
.1.3.6.1.4.1.11.2.3.7.11.12.2.12.5.1.1.27,HP-SN-IP-VRRP-MIB::snVrrpVirRtr2MasterIpAddr,IpAddress,read-only,,mandatory,,The master router's real/virtual (primary) IP address. This is the IP address listed as the source in VRRP and VRRPE advertisement last received by this virtual router.
.1.3.6.1.4.1.11.2.3.7.11.12.2.12.5.1.1.28,HP-SN-IP-VRRP-MIB::snVrrpVirRtr2IpAddrCount,INTEGER,read-only,,mandatory,,The number of IP addresses that are associated with this virtual router. This number is equal to the number of rows in the vrrpAssoIpAddrTable that correspond to a given IF index/VRID pair.
.1.3.6.1.4.1.11.2.3.7.11.12.2.12.5.1.1.29,HP-SN-IP-VRRP-MIB::snVrrpVirRtr2VirtualMacAddr,OCTET,read-only,,mandatory,,The virtual MAC address of the virtual router. Although this object can be derived from the 'snVrrpVirRtr2VrId' object, it is defined so that it is easily obtainable by a management application and can be included in VRRP-related SNMP traps.
.1.3.6.1.4.1.11.2.3.7.11.12.2.13,HP-SN-ROOT-MIB::snLoopbackIf,,,,,,
.1.3.6.1.4.1.11.2.3.7.11.12.2.13.1,HP-SN-IP-MIB::snLoopbackIntfConfigTable,,not-accessible,,mandatory,,Loopback Interface Config table.
.1.3.6.1.4.1.11.2.3.7.11.12.2.13.1.1,HP-SN-IP-MIB::snLoopbackIntfConfigEntry,,not-accessible,snLoopbackIntfConfigPortIndex,mandatory,,An entry in the Loopback Interface Config table.
.1.3.6.1.4.1.11.2.3.7.11.12.2.13.1.1.1,HP-SN-IP-MIB::snLoopbackIntfConfigPortIndex,INTEGER,read-only,,mandatory,,The port index for Loopback Interface config entry.
.1.3.6.1.4.1.11.2.3.7.11.12.2.13.1.1.2,HP-SN-IP-MIB::snLoopbackIntfMode,INTEGER,read-write,,mandatory,disabled(0):enabled(1),The Loopback Interface mode.
.1.3.6.1.4.1.11.2.3.7.11.12.2.13.1.1.3,HP-SN-IP-MIB::snLoopbackIntfRowStatus,INTEGER,read-write,,mandatory,invalid(1):valid(2):delete(3):create(4):modify(5),This object is used to create and
.1.3.6.1.4.1.11.2.3.7.11.12.2.14,HP-SN-ROOT-MIB::snPOS,,,,,,
.1.3.6.1.4.1.11.2.3.7.11.12.2.14.1,HP-SN-POS-GROUP-MIB::snPOSInfo,,,,,,
.1.3.6.1.4.1.11.2.3.7.11.12.2.14.1.1,HP-SN-POS-GROUP-MIB::snPOSInfoTable,,not-accessible,,mandatory,,A specific snPOSInfo group consists of a number of 
.1.3.6.1.4.1.11.2.3.7.11.12.2.14.1.1.1,HP-SN-POS-GROUP-MIB::snPOSInfoEntry,,not-accessible,snPOSInfoPortNum,mandatory,,An entry in the snPOSInfo table indicates the 
.1.3.6.1.4.1.11.2.3.7.11.12.2.14.1.1.1.1,HP-SN-POS-GROUP-MIB::snPOSInfoPortNum,INTEGER,read-only,,mandatory,,The port index.
.1.3.6.1.4.1.11.2.3.7.11.12.2.14.1.1.1.2,HP-SN-POS-GROUP-MIB::snPOSIfIndex,INTEGER,read-only,,mandatory,,In order to identify a particular interface, this
.1.3.6.1.4.1.11.2.3.7.11.12.2.14.1.1.1.3,HP-SN-POS-GROUP-MIB::snPOSDescr,OCTET,read-only,,mandatory,,A textual string containing the slot/port information about the interface.
.1.3.6.1.4.1.11.2.3.7.11.12.2.14.1.1.1.4,HP-SN-POS-GROUP-MIB::snPOSName,OCTET,read-write,,mandatory,,Port Name string.
.1.3.6.1.4.1.11.2.3.7.11.12.2.14.1.1.1.5,HP-SN-POS-GROUP-MIB::snPOSInfoSpeed,INTEGER,read-write,,mandatory,s155000(1):s622000(2):other(3):s2488000(4),The speed configuration for a port. The values are:
.1.3.6.1.4.1.11.2.3.7.11.12.2.14.1.1.1.6,HP-SN-POS-GROUP-MIB::snPOSInfoAdminStatus,INTEGER,read-write,,mandatory,up(1):down(2):testing(3),The desired state of all ports. The
.1.3.6.1.4.1.11.2.3.7.11.12.2.14.1.1.1.7,HP-SN-POS-GROUP-MIB::snPOSInfoLinkStatus,INTEGER,read-only,,mandatory,up(1):down(2):testing(3),The current operational state of the interface. The testing(3) state indicates that no operational packets can be passed.  (same as ifOperStatus in MIB-II)
.1.3.6.1.4.1.11.2.3.7.11.12.2.14.1.1.1.8,HP-SN-POS-GROUP-MIB::snPOSInfoClock,INTEGER,read-write,,mandatory,internal(1):line(2),Clock default internal
.1.3.6.1.4.1.11.2.3.7.11.12.2.14.1.1.1.9,HP-SN-POS-GROUP-MIB::snPOSInfoLoopBack,INTEGER,read-write,,mandatory,line(1):internal(2):none(3),Loop back default none
.1.3.6.1.4.1.11.2.3.7.11.12.2.14.1.1.1.10,HP-SN-POS-GROUP-MIB::snPOSInfoScrambleATM,INTEGER,read-write,,mandatory,disabled(0):enabled(1),ATM style scrambling default off
.1.3.6.1.4.1.11.2.3.7.11.12.2.14.1.1.1.11,HP-SN-POS-GROUP-MIB::snPOSInfoFraming,INTEGER,read-write,,mandatory,sonet(1):sdh(2),Framing default SONET
.1.3.6.1.4.1.11.2.3.7.11.12.2.14.1.1.1.12,HP-SN-POS-GROUP-MIB::snPOSInfoCRC,INTEGER,read-write,,mandatory,crc32bits(1):crc16bits(2),CRC default 32 bit
.1.3.6.1.4.1.11.2.3.7.11.12.2.14.1.1.1.13,HP-SN-POS-GROUP-MIB::snPOSInfoKeepAlive,INTEGER,read-write,,mandatory,,Keep-alive default 10
.1.3.6.1.4.1.11.2.3.7.11.12.2.14.1.1.1.14,HP-SN-POS-GROUP-MIB::snPOSInfoFlagC2,INTEGER,read-write,,mandatory,,C2 flag
.1.3.6.1.4.1.11.2.3.7.11.12.2.14.1.1.1.15,HP-SN-POS-GROUP-MIB::snPOSInfoFlagJ0,INTEGER,read-write,,mandatory,,J0 flag
.1.3.6.1.4.1.11.2.3.7.11.12.2.14.1.1.1.16,HP-SN-POS-GROUP-MIB::snPOSInfoFlagH1,INTEGER,read-write,,mandatory,,H1 flag
.1.3.6.1.4.1.11.2.3.7.11.12.2.14.1.1.1.17,HP-SN-POS-GROUP-MIB::snPOSStatsInFrames,Counter32,read-only,,mandatory,,The total number of packets received on the interface.
.1.3.6.1.4.1.11.2.3.7.11.12.2.14.1.1.1.18,HP-SN-POS-GROUP-MIB::snPOSStatsOutFrames,Counter32,read-only,,mandatory,,The total number of packets transmitted out of the interface.
.1.3.6.1.4.1.11.2.3.7.11.12.2.14.1.1.1.19,HP-SN-POS-GROUP-MIB::snPOSStatsAlignErrors,Counter32,read-only,,mandatory,,dot3StatsAlignmentErrors : A count of frames 
.1.3.6.1.4.1.11.2.3.7.11.12.2.14.1.1.1.20,HP-SN-POS-GROUP-MIB::snPOSStatsFCSErrors,Counter32,read-only,,mandatory,,dot3StatsFCSErrors : A count of frames received 
.1.3.6.1.4.1.11.2.3.7.11.12.2.14.1.1.1.21,HP-SN-POS-GROUP-MIB::snPOSStatsFrameTooLongs,Counter32,read-only,,mandatory,,dot3StatsFrameTooLongs : A count of frames 
.1.3.6.1.4.1.11.2.3.7.11.12.2.14.1.1.1.22,HP-SN-POS-GROUP-MIB::snPOSStatsFrameTooShorts,Counter32,read-only,,mandatory,, A count of frames received on a particular 
.1.3.6.1.4.1.11.2.3.7.11.12.2.14.1.1.1.23,HP-SN-POS-GROUP-MIB::snPOSStatsInDiscard,Counter32,read-only,,mandatory,,The number of inbound packets which were chosen to be discarded even though no errors had been detected to prevent their being deliverable to a higher-layer protocol. One possible reason for discarding such a packet could be to free up buffer space.
.1.3.6.1.4.1.11.2.3.7.11.12.2.14.1.1.1.24,HP-SN-POS-GROUP-MIB::snPOSStatsOutDiscard,Counter32,read-only,,mandatory,,The number of outbound packets which were chosen to be discarded even though no errors had been detected to prevent their being transmitted. One possible reason for discarding such a packet could be to free up buffer space.
.1.3.6.1.4.1.11.2.3.7.11.12.2.14.1.1.1.25,HP-SN-POS-GROUP-MIB::snPOSInOctets,OCTET,read-only,,mandatory,,The total number of octets received on the interface, including framing characters. This object is a 64-bit
.1.3.6.1.4.1.11.2.3.7.11.12.2.14.1.1.1.26,HP-SN-POS-GROUP-MIB::snPOSOutOctets,OCTET,read-only,,mandatory,,The total number of octets transmitted out of the interface, including framing characters. This object is a 64-bit
.1.3.6.1.4.1.11.2.3.7.11.12.2.14.1.1.1.27,HP-SN-POS-GROUP-MIB::snPOSStatsInBitsPerSec,Gauge32,read-only,,mandatory,,The number of bits per second received on the interface over a 5 minutes interval.
.1.3.6.1.4.1.11.2.3.7.11.12.2.14.1.1.1.28,HP-SN-POS-GROUP-MIB::snPOSStatsOutBitsPerSec,Gauge32,read-only,,mandatory,,The number of bits per second transmitted out of the interface over a 5 minutes interval.
.1.3.6.1.4.1.11.2.3.7.11.12.2.14.1.1.1.29,HP-SN-POS-GROUP-MIB::snPOSStatsInPktsPerSec,Gauge32,read-only,,mandatory,,The number of packets per second received on the interface over a 5 minutes interval.
.1.3.6.1.4.1.11.2.3.7.11.12.2.14.1.1.1.30,HP-SN-POS-GROUP-MIB::snPOSStatsOutPktsPerSec,Gauge32,read-only,,mandatory,,The number of packets per second transmitted out of the interface over a 5 minutes interval.
.1.3.6.1.4.1.11.2.3.7.11.12.2.14.1.1.1.31,HP-SN-POS-GROUP-MIB::snPOSStatsInUtilization,INTEGER,read-only,,mandatory,,The input network utilization in hundredths of a percent over a 5 minutes interval.
.1.3.6.1.4.1.11.2.3.7.11.12.2.14.1.1.1.32,HP-SN-POS-GROUP-MIB::snPOSStatsOutUtilization,INTEGER,read-only,,mandatory,,The output network utilization in hundredths of a percent over a 5 minutes interval.
.1.3.6.1.4.1.11.2.3.7.11.12.2.14.1.1.1.33,HP-SN-POS-GROUP-MIB::snPOSTagType,INTEGER,read-only,,mandatory,tagged(1):untagged(2),For tagged port, we could have multiple VLANs 
.1.3.6.1.4.1.11.2.3.7.11.12.2.14.1.1.1.34,HP-SN-POS-GROUP-MIB::snPOSStatsB1,Counter32,read-only,,mandatory,,Section error monitoring.
.1.3.6.1.4.1.11.2.3.7.11.12.2.14.1.1.1.35,HP-SN-POS-GROUP-MIB::snPOSStatsB2,Counter32,read-only,,mandatory,,Line error monitoring.
.1.3.6.1.4.1.11.2.3.7.11.12.2.14.1.1.1.36,HP-SN-POS-GROUP-MIB::snPOSStatsB3,Counter32,read-only,,mandatory,,Path error monitoring.
.1.3.6.1.4.1.11.2.3.7.11.12.2.14.1.1.1.37,HP-SN-POS-GROUP-MIB::snPOSStatsAIS,Counter32,read-only,,mandatory,,Alarm indication signal.
.1.3.6.1.4.1.11.2.3.7.11.12.2.14.1.1.1.38,HP-SN-POS-GROUP-MIB::snPOSStatsRDI,Counter32,read-only,,mandatory,,Remote defect indication.
.1.3.6.1.4.1.11.2.3.7.11.12.2.14.1.1.1.39,HP-SN-POS-GROUP-MIB::snPOSStatsLOP,Counter32,read-only,,mandatory,,Loss of pointer.
.1.3.6.1.4.1.11.2.3.7.11.12.2.14.1.1.1.40,HP-SN-POS-GROUP-MIB::snPOSStatsLOF,Counter32,read-only,,mandatory,,Loss of frame.
.1.3.6.1.4.1.11.2.3.7.11.12.2.14.1.1.1.41,HP-SN-POS-GROUP-MIB::snPOSStatsLOS,Counter32,read-only,,mandatory,,Loss of signal.
.1.3.6.1.4.1.11.2.3.7.11.12.2.15,HP-SN-ROOT-MIB::snMpls,,,,,,
.1.3.6.1.4.1.11.2.3.7.11.12.2.15.15,HP-SN-MPLS-TC-MIB::mplsMIB,,,,,,
.1.3.6.1.4.1.11.2.3.7.11.12.2.15.15.1,HP-SN-MPLS-TC-MIB::mplsTCMIB,,,,,,This MIB module defines Textual Conventions and OBJECT-IDENTITIES for use in documents defining management information bases (MIBs) for managing MPLS networks.
.1.3.6.1.4.1.11.2.3.7.11.12.2.15.15.2,HP-SN-MPLS-LSR-MIB::mplsLsrMIB,,,,,,This MIB contains managed object definitions for the Multiprotocol Label Switching (MPLS) Router as defined in: Rosen, E., Viswanathan, A., and R. Callon, Multiprotocol Label Switching Architecture, RFC 3031, January 2001.
.1.3.6.1.4.1.11.2.3.7.11.12.2.15.15.2.1,HP-SN-MPLS-LSR-MIB::mplsLsrObjects,,,,,,
.1.3.6.1.4.1.11.2.3.7.11.12.2.15.15.2.1.1,HP-SN-MPLS-LSR-MIB::mplsInterfaceConfTable,,not-accessible,,current,,This table specifies per-interface MPLS capability and associated information.
.1.3.6.1.4.1.11.2.3.7.11.12.2.15.15.2.1.1.1,HP-SN-MPLS-LSR-MIB::mplsInterfaceConfEntry,,not-accessible,mplsInterfaceConfIndex,current,,An entry in this table is created by an LSR for every interface capable of supporting MPLS. Each entry in this table will exist only if a corresponding entry in ifTable exists. If the associated entry in ifTable is deleted, the corresponding entry in this table must also be deleted shortly thereafter. The entry with index 0 represents the per-platform label space and contains parameters that apply to all interfaces that participate in the per-platform label space. Other entries defined in this table represent additional MPLS interfaces that may participate in either the per-platform or per-interface label spaces, or both. Additional information about label space participation of an interface is provided in the description clause of mplsInterfaceLabelParticipationType.
.1.3.6.1.4.1.11.2.3.7.11.12.2.15.15.2.1.1.1.1,HP-SN-MPLS-LSR-MIB::mplsInterfaceConfIndex,Integer32,not-accessible,,current,,This is a unique index for an entry in the MplsInterfaceConfTable. A non-zero index for an entry indicates the ifIndex for the corresponding interface entry in of the MPLS-layer in the ifTable. Note that the per-platform label space may apply to several interfaces, and therefore the configuration of the per-platform label space interface parameters will apply to all of the interfaces that are participating in the per-platform label space.
.1.3.6.1.4.1.11.2.3.7.11.12.2.15.15.2.1.1.1.2,HP-SN-MPLS-LSR-MIB::mplsInterfaceLabelMinIn,Unsigned32,read-only,,current,,This is the minimum value of an MPLS label that this LSR is willing to receive on this interface.
.1.3.6.1.4.1.11.2.3.7.11.12.2.15.15.2.1.1.1.3,HP-SN-MPLS-LSR-MIB::mplsInterfaceLabelMaxIn,Unsigned32,read-only,,current,,This is the maximum value of an MPLS label that this LSR is willing to receive on this interface.
.1.3.6.1.4.1.11.2.3.7.11.12.2.15.15.2.1.1.1.4,HP-SN-MPLS-LSR-MIB::mplsInterfaceLabelMinOut,Unsigned32,read-only,,current,,This is the minimum value of an MPLS label that this LSR is willing to send on this interface.
.1.3.6.1.4.1.11.2.3.7.11.12.2.15.15.2.1.1.1.5,HP-SN-MPLS-LSR-MIB::mplsInterfaceLabelMaxOut,Unsigned32,read-only,,current,,This is the maximum value of an MPLS label that this LSR is willing to send on this interface.
.1.3.6.1.4.1.11.2.3.7.11.12.2.15.15.2.1.1.1.6,HP-SN-MPLS-LSR-MIB::mplsInterfaceTotalBandwidth,Integer32,read-only,,current,,This value indicates the total amount of usable bandwidth on this interface and is specified in kilobits per second (Kbps). This variable is not applicable when applied to the interface with index 0. When this value cannot be measured, this value should contain the nominal bandwidth.
.1.3.6.1.4.1.11.2.3.7.11.12.2.15.15.2.1.1.1.7,HP-SN-MPLS-LSR-MIB::mplsInterfaceAvailableBandwidth,Integer32,read-only,,current,,This value indicates the total amount of available bandwidth available on this interface and is specified in kilobits per second (Kbps). This value is calculated as the difference between the amount of bandwidth currently in use and that specified in mplsInterfaceTotalBandwidth. This variable is not applicable when applied to the interface with index 0. When this value cannot be measured, this value should contain the nominal bandwidth.
.1.3.6.1.4.1.11.2.3.7.11.12.2.15.15.2.1.1.1.8,HP-SN-MPLS-LSR-MIB::mplsInterfaceLabelParticipationType,BITS,read-only,,current,perPlatform(0):perInterface(1),Either the perPlatform(0) or perInterface(1) bit MUST be set. If the value of the mplsInterfaceConfIndex for this entry is zero, then only the perPlatform(0) bit MUST be set and the perInterface(1) bit is meaningless. If the perInterface(1) bit is set then the value of mplsInterfaceLabelMinIn, mplsInterfaceLabelMaxIn, mplsInterfaceLabelMinOut, and mplsInterfaceLabelMaxOut for this entry reflect the label ranges for this interface. If only the perPlatform(0) bit is set, then the value of mplsInterfaceLabelMinIn, mplsInterfaceLabelMaxIn, mplsInterfaceLabelMinOut, and mplsInterfaceLabelMaxOut for this entry must be identical to the instance of these objects with index 0.
.1.3.6.1.4.1.11.2.3.7.11.12.2.15.15.2.1.2,HP-SN-MPLS-LSR-MIB::mplsInterfacePerfTable,,not-accessible,,current,,This table provides MPLS performance information on a per-interface basis.
.1.3.6.1.4.1.11.2.3.7.11.12.2.15.15.2.1.2.1,HP-SN-MPLS-LSR-MIB::mplsInterfacePerfEntry,,not-accessible,,current,,An entry in this table is created by the LSR for every interface capable of supporting MPLS. Its is an extension to the mplsInterfaceConfEntry table.
.1.3.6.1.4.1.11.2.3.7.11.12.2.15.15.2.1.2.1.1,HP-SN-MPLS-LSR-MIB::mplsInterfaceInLabelsUsed,Gauge32,read-only,,current,,This object counts the number of labels that are in use at this point in time on this interface in the incoming direction. If the interface participates in the per-platform label space only, then this instance of this object MUST be identical with the instance with index 0. If the interface participates in the per-interface label space, then this instance of this object MUST represent the number of of per- interface labels that are in use at this point in time on this interface.
.1.3.6.1.4.1.11.2.3.7.11.12.2.15.15.2.1.2.1.2,HP-SN-MPLS-LSR-MIB::mplsInterfaceFailedLabelLookup,Counter32,read-only,,current,,This object counts the number of labeled packets that have been received on this interface and were discarded because there was no matching cross- connect entry. This object MUST count on a per- interface basis regardless of which label space the interface participates in.
.1.3.6.1.4.1.11.2.3.7.11.12.2.15.15.2.1.2.1.3,HP-SN-MPLS-LSR-MIB::mplsInterfaceOutLabelsUsed,Gauge32,read-only,,current,,This object counts the number of top-most labels in the outgoing label stacks that are in use at this point in time on this interface. This object MUST count on a per-interface basis regardless of which label space the interface participates in.
.1.3.6.1.4.1.11.2.3.7.11.12.2.15.15.2.1.2.1.4,HP-SN-MPLS-LSR-MIB::mplsInterfaceOutFragments,Counter32,read-only,,current,,This object counts the number of outgoing MPLS packets that required fragmentation before transmission on this interface. This object MUST count on a per-interface basis regardless of which label space the interface participates in.
.1.3.6.1.4.1.11.2.3.7.11.12.2.15.15.2.1.3,HP-SN-MPLS-LSR-MIB::mplsInSegmentTable,,not-accessible,,current,,This table contains a collection of incoming segments to an LSR.
.1.3.6.1.4.1.11.2.3.7.11.12.2.15.15.2.1.3.1,HP-SN-MPLS-LSR-MIB::mplsInSegmentEntry,,not-accessible,mplsInSegmentIfIndex:mplsInSegmentLabel,current,,An entry in this table represents one incoming segment. An entry can be created by a network administrator or an SNMP agent, or an MPLS signaling protocol. The creator of the entry is denoted by mplsInSegmentOwner. An entry in this table is indexed by the ifIndex of the incoming interface and the (top) label. The value of mplsInSegmentRowStatus cannot be active(1)unless the ifTable entry corresponding to mplsInSegmentIfIndex exists.
.1.3.6.1.4.1.11.2.3.7.11.12.2.15.15.2.1.3.1.1,HP-SN-MPLS-LSR-MIB::mplsInSegmentIfIndex,Integer32,not-accessible,,current,,This is a unique index for an entry in the MplsInSegmentTable. This value represents the interface index for the incoming MPLS interface. A value of zero represents an incoming label from the per-platform label space. In this case, the mplsInSegmentLabel is interpreted to be an MPLS-type label.
.1.3.6.1.4.1.11.2.3.7.11.12.2.15.15.2.1.3.1.2,HP-SN-MPLS-LSR-MIB::mplsInSegmentLabel,Unsigned32,not-accessible,,current,,The incoming label for this segment.
.1.3.6.1.4.1.11.2.3.7.11.12.2.15.15.2.1.3.1.3,HP-SN-MPLS-LSR-MIB::mplsInSegmentNPop,Integer32,read-create,,current,,The number of labels to pop from the incoming packet. Normally only the top label is popped from the packet and used for all switching decisions for that packet. Note that technologies which do not support label popping should set this value to its default value of 1. This object cannot be modified if mplsInSegmentRowStatus is active(1).
.1.3.6.1.4.1.11.2.3.7.11.12.2.15.15.2.1.3.1.4,HP-SN-MPLS-LSR-MIB::mplsInSegmentAddrFamily,INTEGER,read-create,,current,other(0):ipV4(1):ipV6(2):nsap(3):hdlc(4):bbn1822(5):all802(6):e163(7):e164(8):f69(9):x121(10):ipx(11):appleTalk(12):decnetIV(13):banyanVines(14):e164withNsap(15):dns(16):distinguishedName(17):asNumber(18):xtpOverIpv4(19):xtpOverIpv6(20):xtpNativeModeXTP(21):fibreChannelWWPN(22):fibreChannelWWNN(23):gwid(24):afi(25):mplsTpSectionEndpointIdentifier(26):mplsTpLspEndpointIdentifier(27):mplsTpPseudowireEndpointIdentifier(28):eigrpCommonServiceFamily(16384):eigrpIpv4ServiceFamily(16385):eigrpIpv6ServiceFamily(16386):lispCanonicalAddressFormat(16387):bgpLs(16388):fortyeightBitMac(16389):sixtyfourBitMac(16390):oui(16391):mac24(16392):mac40(16393):ipv664(16394):rBridgePortID(16395):trillNickname(16396):reserved(65535),The IANA address family [IANAFamily] of the incoming packet. A value of other(0) indicates that the family type is either unknown or undefined. This object cannot be modified if mplsInSegmentRowStatus is active(1).
.1.3.6.1.4.1.11.2.3.7.11.12.2.15.15.2.1.3.1.5,HP-SN-MPLS-LSR-MIB::mplsInSegmentXCIndex,Unsigned32,read-only,,current,,Index into mplsXCTable which identifies which cross- connect entry this segment is part of. A value of zero indicates that this entry is not referred to by any cross-connect entry. When a cross-connect entry is created which this in-segment is a part of, this object is automatically updated to reflect the value of mplsXCIndex of that cross-connect entry.
.1.3.6.1.4.1.11.2.3.7.11.12.2.15.15.2.1.3.1.6,HP-SN-MPLS-LSR-MIB::mplsInSegmentOwner,INTEGER,read-create,,current,other(1):snmp(2):ldp(3):rsvp(4):crldp(5):policyAgent(6):unknown(7),Denotes the entity that created and is responsible for managing this segment. This object cannot be modified if mplsInSegmentRowStatus is active(1).
.1.3.6.1.4.1.11.2.3.7.11.12.2.15.15.2.1.3.1.7,HP-SN-MPLS-LSR-MIB::mplsInSegmentTrafficParamPtr,OBJECT,read-create,,current,,This variable represents a pointer to the traffic parameter specification for this in-segment. This value may point at an entry in the mplsTrafficParamTable to indicate which mplsTrafficParamEntry is to be assigned to this segment. This value may optionally point at an externally defined traffic parameter specification table. A value of zero-dot-zero indicates best-effort treatment. By having the same value of this object, two or more segments can indicate resource sharing. This object cannot be modified if mplsInSegmentRowStatus is active(1).
.1.3.6.1.4.1.11.2.3.7.11.12.2.15.15.2.1.3.1.8,HP-SN-MPLS-LSR-MIB::mplsInSegmentRowStatus,INTEGER,read-create,,current,active(1):notInService(2):notReady(3):createAndGo(4):createAndWait(5):destroy(6),This variable is used to create, modify, and/or delete a row in this table.
.1.3.6.1.4.1.11.2.3.7.11.12.2.15.15.2.1.3.1.9,HP-SN-MPLS-LSR-MIB::mplsInSegmentStorageType,INTEGER,read-create,,current,other(1):volatile(2):nonVolatile(3):permanent(4):readOnly(5),This variable indicates the storage type for this object. This object cannot be modified if mplsInSegmentRowStatus is active(1). If this variable is set to readOnly(5), and the corresponding TFIB entry is removed, then the agent must remove this row shortly thereafter.
.1.3.6.1.4.1.11.2.3.7.11.12.2.15.15.2.1.4,HP-SN-MPLS-LSR-MIB::mplsInSegmentPerfTable,,not-accessible,,current,,This table contains statistical information for incoming MPLS segments to an LSR.
.1.3.6.1.4.1.11.2.3.7.11.12.2.15.15.2.1.4.1,HP-SN-MPLS-LSR-MIB::mplsInSegmentPerfEntry,,not-accessible,,current,,An entry in this table contains statistical information about one incoming segment which was configured in the mplsInSegmentTable. The counters in this entry should behave in a manner similar to that of the interface.
.1.3.6.1.4.1.11.2.3.7.11.12.2.15.15.2.1.4.1.1,HP-SN-MPLS-LSR-MIB::mplsInSegmentOctets,Counter32,read-only,,current,,This value represents the total number of octets received by this segment.
.1.3.6.1.4.1.11.2.3.7.11.12.2.15.15.2.1.4.1.2,HP-SN-MPLS-LSR-MIB::mplsInSegmentPackets,Counter32,read-only,,current,,Total number of packets received by this segment.
.1.3.6.1.4.1.11.2.3.7.11.12.2.15.15.2.1.4.1.3,HP-SN-MPLS-LSR-MIB::mplsInSegmentErrors,Counter32,read-only,,current,,The number of errored packets received on this segment.
.1.3.6.1.4.1.11.2.3.7.11.12.2.15.15.2.1.4.1.4,HP-SN-MPLS-LSR-MIB::mplsInSegmentDiscards,Counter32,read-only,,current,,The number of labeled packets received on this in- segment, which were chosen to be discarded even though no errors had been detected to prevent their being transmitted. One possible reason for discarding such a labeled packet could be to free up buffer space.
.1.3.6.1.4.1.11.2.3.7.11.12.2.15.15.2.1.4.1.5,HP-SN-MPLS-LSR-MIB::mplsInSegmentHCOctets,Counter64,read-only,,current,,The total number of octets received. This is the 64 bit version of mplsInSegmentOctets.
.1.3.6.1.4.1.11.2.3.7.11.12.2.15.15.2.1.4.1.6,HP-SN-MPLS-LSR-MIB::mplsInSegmentPerfDiscontinuityTime,TimeTicks,read-only,,current,,The value of sysUpTime on the most recent occasion at which any one or more of this segment's Counter32 or Counter64 suffered a discontinuity. If no such discontinuities have occurred since the last re- initialization of the local management subsystem, then this object contains a zero value.
.1.3.6.1.4.1.11.2.3.7.11.12.2.15.15.2.1.5,HP-SN-MPLS-LSR-MIB::mplsOutSegmentIndexNext,Unsigned32,read-only,,current,,This object contains the next appropriate value to be used for mplsOutSegmentIndex when creating entries in the mplsOutSegmentTable. If the number of unassigned entries is exhausted, this object will take on the value of 0. To obtain the mplsOutSegmentIndex value for a new entry, the manager must first issue a management protocol retrieval operation to obtain the current value of this object. The agent should modify the value to reflect the next unassigned index after each retrieval operation. After a manager retrieves a value the agent will determine through its local policy when this index value will be made available for reuse.
.1.3.6.1.4.1.11.2.3.7.11.12.2.15.15.2.1.6,HP-SN-MPLS-LSR-MIB::mplsOutSegmentTable,,not-accessible,,current,,This table contains a representation of the outgoing segments from an LSR.
.1.3.6.1.4.1.11.2.3.7.11.12.2.15.15.2.1.6.1,HP-SN-MPLS-LSR-MIB::mplsOutSegmentEntry,,not-accessible,mplsOutSegmentIndex,current,,An entry in this table represents one outgoing segment. An entry can be created by a network administrator or an SNMP agent, or an MPLS signaling protocol. The object mplsOutSegmentOwner indicates the creator of this entry. The value of mplsOutSegmentRowStatus cannot be active(1)unless the ifTable entry corresponding to mplsOutSegmentIfIndex exists.
.1.3.6.1.4.1.11.2.3.7.11.12.2.15.15.2.1.6.1.1,HP-SN-MPLS-LSR-MIB::mplsOutSegmentIndex,Unsigned32,not-accessible,,current,,This value contains a unique index for this row. While a value of 0 is not valid as an index for this row it can be supplied as a valid value to index mplsXCTable to access entries for which no out- segment has been configured.
.1.3.6.1.4.1.11.2.3.7.11.12.2.15.15.2.1.6.1.2,HP-SN-MPLS-LSR-MIB::mplsOutSegmentIfIndex,Integer32,read-create,,current,,This value must contain the interface index of the outgoing interface. This object may only take the value of 0 during the create-and-wait row creation operation if the management station has not yet set the value of this object. This object cannot be modified if mplsOutSegmentRowStatus is active(1). The mplsOutSegmentRowStatus cannot be set to active(1) until this object is set to a value corresponding to a valid ifEntry.
.1.3.6.1.4.1.11.2.3.7.11.12.2.15.15.2.1.6.1.3,HP-SN-MPLS-LSR-MIB::mplsOutSegmentPushTopLabel,INTEGER,read-create,,current,true(1):false(2),This value indicates whether or not a top label should be pushed onto the outgoing packet's label stack. The value of this variable MUST be set to true if the outgoing interface does not support pop- and-go (for example an ATM interface) or if it is a tunnel origination. Note that it is considered an error in the case that mplsOutSegmentPushTopLabel is set to false, but the cross-connect entry which refers to this out-segment has a non-zero mplsLabelStackIndex. The LSR MUST ensure that this situation does not happen. This object cannot be modified if mplsOutSegmentRowStatus is active(1).
.1.3.6.1.4.1.11.2.3.7.11.12.2.15.15.2.1.6.1.4,HP-SN-MPLS-LSR-MIB::mplsOutSegmentTopLabel,Unsigned32,read-create,,current,,If mplsOutSegmentPushTopLabel is true then this represents the label that should be pushed onto the top of the outgoing packet's label stack. Otherwise this value SHOULD be set to 0 by the management station and MUST be ignored by the agent. This object cannot be modified if mplsOutSegmentRowStatus is active(1).
.1.3.6.1.4.1.11.2.3.7.11.12.2.15.15.2.1.6.1.5,HP-SN-MPLS-LSR-MIB::mplsOutSegmentNextHopIpAddrType,INTEGER,read-create,,current,unknown(0):ipv4(1):ipv6(2):ipv4z(3):ipv6z(4):dns(16),Indicates whether the next hop address is IPv4 or IPv6. Note that a value of unknown (0) is valid only when the outgoing interface is of type point-to- point. This object cannot be modified if mplsOutSegmentRowStatus is active(1).
.1.3.6.1.4.1.11.2.3.7.11.12.2.15.15.2.1.6.1.6,HP-SN-MPLS-LSR-MIB::mplsOutSegmentNextHopIpv4Addr,OCTET,read-create,,current,,IPv4 Address of the next hop. Its value is significant only when mplsOutSegmentNextHopIpAddrType is ipV4 (1), otherwise it SHOULD return a value of 0. This object cannot be modified if mplsOutSegmentRowStatus is active(1).
.1.3.6.1.4.1.11.2.3.7.11.12.2.15.15.2.1.6.1.7,HP-SN-MPLS-LSR-MIB::mplsOutSegmentNextHopIpv6Addr,OCTET,read-create,,current,,IPv6 address of the next hop. Its value is significant only when mplsOutSegmentNextHopIpAddrType is ipV6 (2), otherwise it SHOULD return a value of 0. This object cannot be modified if mplsOutSegmentRowStatus is active(1).
.1.3.6.1.4.1.11.2.3.7.11.12.2.15.15.2.1.6.1.8,HP-SN-MPLS-LSR-MIB::mplsOutSegmentXCIndex,Unsigned32,read-only,,current,,Index into mplsXCTable which identifies which cross- connect entry this segment is part of. A value of zero indicates that this entry is not referred to by any cross-connect entry. When a cross-connect entry is created which this out-segment is a part of, this object is automatically updated to reflect the value of mplsXCIndex of that cross-connect entry.
.1.3.6.1.4.1.11.2.3.7.11.12.2.15.15.2.1.6.1.9,HP-SN-MPLS-LSR-MIB::mplsOutSegmentOwner,INTEGER,read-create,,current,other(1):snmp(2):ldp(3):rsvp(4):crldp(5):policyAgent(6):unknown(7),Denotes the entity which created and is responsible for managing this segment. This object cannot be modified if mplsOutSegmentRowStatus is active(1).
.1.3.6.1.4.1.11.2.3.7.11.12.2.15.15.2.1.6.1.10,HP-SN-MPLS-LSR-MIB::mplsOutSegmentTrafficParamPtr,OBJECT,read-create,,current,,This variable represents a pointer to the traffic parameter specification for this out-segment. This value may point at an entry in the mplsTrafficParamTable to indicate which mplsTrafficParamEntry is to be assigned to this segment. This value may optionally point at an externally defined traffic parameter specification table. A value of zero-dot-zero indicates best- effort treatment. By having the same value of this object, two or more segments can indicate resource sharing. This object cannot be modified if mplsOutSegmentRowStatus is active(1).
.1.3.6.1.4.1.11.2.3.7.11.12.2.15.15.2.1.6.1.11,HP-SN-MPLS-LSR-MIB::mplsOutSegmentRowStatus,INTEGER,read-create,,current,active(1):notInService(2):notReady(3):createAndGo(4):createAndWait(5):destroy(6),For creating, modifying, and deleting this row.
.1.3.6.1.4.1.11.2.3.7.11.12.2.15.15.2.1.6.1.12,HP-SN-MPLS-LSR-MIB::mplsOutSegmentStorageType,INTEGER,read-create,,current,other(1):volatile(2):nonVolatile(3):permanent(4):readOnly(5),This variable indicates the storage type for this object. This object cannot be modified if mplsOutSegmentRowStatus is active(1). If this variable is set to readOnly(5), and the corresponding TFIB entry is removed, then the agent must remove this row shortly thereafter.
.1.3.6.1.4.1.11.2.3.7.11.12.2.15.15.2.1.7,HP-SN-MPLS-LSR-MIB::mplsOutSegmentPerfTable,,not-accessible,,current,,This table contains statistical information about outgoing segments from an LSR. The counters in this entry should behave in a manner similar to that of the interface.
.1.3.6.1.4.1.11.2.3.7.11.12.2.15.15.2.1.7.1,HP-SN-MPLS-LSR-MIB::mplsOutSegmentPerfEntry,,not-accessible,,current,,An entry in this table contains statistical information about one outgoing segment configured in mplsOutSegmentTable.
.1.3.6.1.4.1.11.2.3.7.11.12.2.15.15.2.1.7.1.1,HP-SN-MPLS-LSR-MIB::mplsOutSegmentOctets,Counter32,read-only,,current,,This value contains the total number of octets sent on this segment.
.1.3.6.1.4.1.11.2.3.7.11.12.2.15.15.2.1.7.1.2,HP-SN-MPLS-LSR-MIB::mplsOutSegmentPackets,Counter32,read-only,,current,,This value contains the total number of packets sent on this segment.
.1.3.6.1.4.1.11.2.3.7.11.12.2.15.15.2.1.7.1.3,HP-SN-MPLS-LSR-MIB::mplsOutSegmentErrors,Counter32,read-only,,current,,Number of packets that could not be sent due to errors on this segment.
.1.3.6.1.4.1.11.2.3.7.11.12.2.15.15.2.1.7.1.4,HP-SN-MPLS-LSR-MIB::mplsOutSegmentDiscards,Counter32,read-only,,current,,The number of labeled packets received on this out- segment, which were chosen to be discarded even though no errors had been detected to prevent their being transmitted. One possible reason for discarding such a labeled packet could be to free up buffer space.
.1.3.6.1.4.1.11.2.3.7.11.12.2.15.15.2.1.7.1.5,HP-SN-MPLS-LSR-MIB::mplsOutSegmentHCOctets,Counter64,read-only,,current,,Total number of octets sent. This is the 64 bit version of mplsOutSegmentOctets.
.1.3.6.1.4.1.11.2.3.7.11.12.2.15.15.2.1.7.1.6,HP-SN-MPLS-LSR-MIB::mplsOutSegmentPerfDiscontinuityTime,TimeTicks,read-only,,current,,The value of sysUpTime on the most recent occasion at which any one or more of this segment's Counter32 or Counter64 suffered a discontinuity. If no such discontinuities have occurred since the last re- initialization of the local management subsystem, then this object contains a zero value.
.1.3.6.1.4.1.11.2.3.7.11.12.2.15.15.2.1.8,HP-SN-MPLS-LSR-MIB::mplsXCIndexNext,Unsigned32,read-only,,current,,This object contains an appropriate value to be used for mplsXCIndex when creating entries in the mplsXCTable. The value 0 indicates that no unassigned entries are available. To obtain the value of mplsXCIndex for a new entry in the mplsXCTable, the manager issues a management protocol retrieval operation to obtain the current value of mplsXCIndex. After each retrieval operation, the agent should modify the value to reflect the next unassigned index. After a manager retrieves a value the agent will determine through its local policy when this index value will be made available for reuse.
.1.3.6.1.4.1.11.2.3.7.11.12.2.15.15.2.1.9,HP-SN-MPLS-LSR-MIB::mplsXCTable,,not-accessible,,current,,This table specifies information for switching between LSP segments. It supports point-to-point, point-to-multipoint and multipoint-to-point connections. mplsLabelStackTable specifies the label stack information for a cross-connect LSR and is referred to from mplsXCTable.
.1.3.6.1.4.1.11.2.3.7.11.12.2.15.15.2.1.9.1,HP-SN-MPLS-LSR-MIB::mplsXCEntry,,not-accessible,mplsXCIndex:mplsInSegmentIfIndex:mplsInSegmentLabel:mplsOutSegmentIndex,current,,A row in this table represents one cross-connect entry. The following objects index it:  - cross-connect index mplsXCIndex that uniquely identifies a group of cross-connect entries - interface index of the in-segment, mplsInSegmentIfIndex - incoming label(s), mplsInSegmentLabel - out-segment index, mplsOutSegmentIndex  Originating LSPs: These are represented by using the special combination of values mplsInSegmentIfIndex=0 and mplsInSegmentLabel=0 as indexes. In this case the mplsOutSegmentIndex MUST be non-zero.  Terminating LSPs: These are represented by using the special value mplsOutSegmentIndex=0 as index.  Special labels: Entries indexed by reserved MPLS label values 0 through 15 imply terminating LSPs and MUST have mplsOutSegmentIfIndex = 0. Note that situations where LSPs are terminated with incoming label equal to 0, should have mplsInSegmentIfIndex = 0 as well, but can be distinguished from originating LSPs because the mplsOutSegmentIfIndex = 0. The mplsOutSegmentIfIndex MUST only be set to 0 in cases of terminating LSPs.  An entry can be created by a network administrator or by an SNMP agent as instructed by an MPLS signaling protocol.
.1.3.6.1.4.1.11.2.3.7.11.12.2.15.15.2.1.9.1.1,HP-SN-MPLS-LSR-MIB::mplsXCIndex,Unsigned32,not-accessible,,current,,Primary index for the conceptual row identifying a group of cross-connect segments.
.1.3.6.1.4.1.11.2.3.7.11.12.2.15.15.2.1.9.1.2,HP-SN-MPLS-LSR-MIB::mplsXCLspId,OCTET,read-create,,current,,This value identifies the label switched path that this cross-connect entry belongs to. This object cannot be modified if mplsXCRowStatus is active(1).
.1.3.6.1.4.1.11.2.3.7.11.12.2.15.15.2.1.9.1.3,HP-SN-MPLS-LSR-MIB::mplsXCLabelStackIndex,Unsigned32,read-create,,current,,Primary index into mplsLabelStackTable identifying a stack of labels to be pushed beneath the top label. Note that the top label identified by the out- segment ensures that all the components of a multipoint-to-point connection have the same outgoing label. A value of 0 indicates that no labels are to be stacked beneath the top label. This object cannot be modified if mplsXCRowStatus is active(1).
.1.3.6.1.4.1.11.2.3.7.11.12.2.15.15.2.1.9.1.4,HP-SN-MPLS-LSR-MIB::mplsXCIsPersistent,INTEGER,read-create,,current,true(1):false(2),Denotes whether or not this cross-connect entry and associated in- and out-segments should be restored automatically after failures. This value MUST be set to false in cases where this cross-connect entry was created by a signaling protocol. This object cannot be modified if mplsXCRowStatus is active(1).
.1.3.6.1.4.1.11.2.3.7.11.12.2.15.15.2.1.9.1.5,HP-SN-MPLS-LSR-MIB::mplsXCOwner,INTEGER,read-create,,current,other(1):snmp(2):ldp(3):rsvp(4):crldp(5):policyAgent(6):unknown(7),Denotes the entity that created and is responsible for managing this cross-connect. This object cannot be modified if mplsXCRowStatus is active(1).
.1.3.6.1.4.1.11.2.3.7.11.12.2.15.15.2.1.9.1.6,HP-SN-MPLS-LSR-MIB::mplsXCRowStatus,INTEGER,read-create,,current,active(1):notInService(2):notReady(3):createAndGo(4):createAndWait(5):destroy(6),For creating, modifying, and deleting this row.
.1.3.6.1.4.1.11.2.3.7.11.12.2.15.15.2.1.9.1.7,HP-SN-MPLS-LSR-MIB::mplsXCStorageType,INTEGER,read-create,,current,other(1):volatile(2):nonVolatile(3):permanent(4):readOnly(5),Defines the storage type for this object. This object cannot be modified if mplsXCRowStatus is active(1). If this variable is set to readOnly(5), and the corresponding TFIB entry is removed, then the agent must remove this row shortly thereafter.
.1.3.6.1.4.1.11.2.3.7.11.12.2.15.15.2.1.9.1.8,HP-SN-MPLS-LSR-MIB::mplsXCAdminStatus,INTEGER,read-create,,current,up(1):down(2):testing(3),The desired operational status of this segment.
.1.3.6.1.4.1.11.2.3.7.11.12.2.15.15.2.1.9.1.9,HP-SN-MPLS-LSR-MIB::mplsXCOperStatus,INTEGER,read-only,,current,up(1):down(2):testing(3):unknown(4):dormant(5):notPresent(6):lowerLayerDown(7),The actual operational status of this cross- connect.
.1.3.6.1.4.1.11.2.3.7.11.12.2.15.15.2.1.10,HP-SN-MPLS-LSR-MIB::mplsMaxLabelStackDepth,Integer32,read-only,,current,,The maximum stack depth supported by this LSR.
.1.3.6.1.4.1.11.2.3.7.11.12.2.15.15.2.1.11,HP-SN-MPLS-LSR-MIB::mplsLabelStackIndexNext,Unsigned32,read-only,,current,,This object contains an appropriate value to be used for mplsLabelStackIndex when creating entries in the mplsLabelStackTable. The value 0 indicates that no unassigned entries are available. To obtain an mplsLabelStackIndex value for a new entry, the manager issues a management protocol retrieval operation to obtain the current value of this object. After each retrieval operation, the agent should modify the value to reflect the next unassigned index. After a manager retrieves a value the agent will determine through its local policy when this index value will be made available for reuse.
.1.3.6.1.4.1.11.2.3.7.11.12.2.15.15.2.1.12,HP-SN-MPLS-LSR-MIB::mplsLabelStackTable,,not-accessible,,current,,This table specifies the label stack to be pushed onto a packet, beneath the top label. Entries into this table are referred to from mplsXCTable.
.1.3.6.1.4.1.11.2.3.7.11.12.2.15.15.2.1.12.1,HP-SN-MPLS-LSR-MIB::mplsLabelStackEntry,,not-accessible,mplsLabelStackIndex:mplsLabelStackLabelIndex,current,,An entry in this table represents one label which is to be pushed onto an outgoing packet, beneath the top label. An entry can be created by a network administrator or by an SNMP agent as instructed by an MPLS signaling protocol.
.1.3.6.1.4.1.11.2.3.7.11.12.2.15.15.2.1.12.1.1,HP-SN-MPLS-LSR-MIB::mplsLabelStackIndex,Unsigned32,not-accessible,,current,,Primary index for this row identifying a stack of labels to be pushed on an outgoing packet, beneath the top label.
.1.3.6.1.4.1.11.2.3.7.11.12.2.15.15.2.1.12.1.2,HP-SN-MPLS-LSR-MIB::mplsLabelStackLabelIndex,Unsigned32,not-accessible,,current,,Secondary index for this row identifying one label of the stack. Note that an entry with a smaller mplsLabelStackLabelIndex would refer to a label higher up the label stack and would be popped at a downstream LSR before a label represented by a higher mplsLabelStackLabelIndex at a downstream LSR.
.1.3.6.1.4.1.11.2.3.7.11.12.2.15.15.2.1.12.1.3,HP-SN-MPLS-LSR-MIB::mplsLabelStackLabel,Unsigned32,read-create,,current,,The label to pushed.
.1.3.6.1.4.1.11.2.3.7.11.12.2.15.15.2.1.12.1.4,HP-SN-MPLS-LSR-MIB::mplsLabelStackRowStatus,INTEGER,read-create,,current,active(1):notInService(2):notReady(3):createAndGo(4):createAndWait(5):destroy(6),For creating, modifying, and deleting this row.
.1.3.6.1.4.1.11.2.3.7.11.12.2.15.15.2.1.12.1.5,HP-SN-MPLS-LSR-MIB::mplsLabelStackStorageType,INTEGER,read-create,,current,other(1):volatile(2):nonVolatile(3):permanent(4):readOnly(5),Defines the storage type for this object. If this variable is set to readOnly(5), and the corresponding TFIB entry is removed, then the agent must remove this row shortly thereafter.
.1.3.6.1.4.1.11.2.3.7.11.12.2.15.15.2.1.13,HP-SN-MPLS-LSR-MIB::mplsTrafficParamIndexNext,Unsigned32,read-only,,current,,This object contains an appropriate value which will be used for mplsTrafficParamIndex when creating entries in the mplsTrafficParamTable. The value 0 indicates that no unassigned entries are available. To obtain the mplsTrafficParamIndex value for a new entry, the manager issues a management protocol retrieval operation to obtain the current value of this object. After each retrieval operation, the agent should modify the value to reflect the next unassigned index. After a manager retrieves a value the agent will determine through its local policy when this index value will be made available for reuse.
.1.3.6.1.4.1.11.2.3.7.11.12.2.15.15.2.1.14,HP-SN-MPLS-LSR-MIB::mplsTrafficParamTable,,not-accessible,,current,,This table specifies the Traffic Parameter objects for in and out-segments.
.1.3.6.1.4.1.11.2.3.7.11.12.2.15.15.2.1.14.1,HP-SN-MPLS-LSR-MIB::mplsTrafficParamEntry,,not-accessible,mplsTrafficParamIndex,current,,An entry in this table represents the TrafficParam objects for one or more in or out segments. A single entry can be pointed to by multiple segments indicating resource sharing.
.1.3.6.1.4.1.11.2.3.7.11.12.2.15.15.2.1.14.1.1,HP-SN-MPLS-LSR-MIB::mplsTrafficParamIndex,Unsigned32,not-accessible,,current,,Uniquely identifies this row of the table. Note that zero represents an invalid index.
.1.3.6.1.4.1.11.2.3.7.11.12.2.15.15.2.1.14.1.2,HP-SN-MPLS-LSR-MIB::mplsTrafficParamMaxRate,Integer32,read-create,,current,,Maximum rate in kilobits/second.
.1.3.6.1.4.1.11.2.3.7.11.12.2.15.15.2.1.14.1.3,HP-SN-MPLS-LSR-MIB::mplsTrafficParamMeanRate,Integer32,read-create,,current,,Mean rate in kilobits/second.
.1.3.6.1.4.1.11.2.3.7.11.12.2.15.15.2.1.14.1.4,HP-SN-MPLS-LSR-MIB::mplsTrafficParamMaxBurstSize,Unsigned32,read-create,,current,,Maximum burst size in bytes.
.1.3.6.1.4.1.11.2.3.7.11.12.2.15.15.2.1.14.1.5,HP-SN-MPLS-LSR-MIB::mplsTrafficParamRowStatus,INTEGER,read-create,,current,active(1):notInService(2):notReady(3):createAndGo(4):createAndWait(5):destroy(6),For creating, modifying, and deleting this row.
.1.3.6.1.4.1.11.2.3.7.11.12.2.15.15.2.1.14.1.6,HP-SN-MPLS-LSR-MIB::mplsTrafficParamStorageType,INTEGER,read-create,,current,other(1):volatile(2):nonVolatile(3):permanent(4):readOnly(5),The storage type for this object. If this variable is set to readOnly(5), and the corresponding TFIB entry is removed, then the agent must remove this row shortly thereafter.
.1.3.6.1.4.1.11.2.3.7.11.12.2.15.15.2.1.15,HP-SN-MPLS-LSR-MIB::mplsXCTrapEnable,INTEGER,read-write,,current,true(1):false(2),If this object is set to true(1), then it enables the emission of mplsXCUp and mplsXCDown notifications; otherwise these notifications are not emitted.
.1.3.6.1.4.1.11.2.3.7.11.12.2.15.15.2.2,HP-SN-MPLS-LSR-MIB::mplsLsrNotifications,,,,,,
.1.3.6.1.4.1.11.2.3.7.11.12.2.15.15.2.2.0,HP-SN-MPLS-LSR-MIB::mplsLsrNotifyPrefix,,,,,,
.1.3.6.1.4.1.11.2.3.7.11.12.2.15.15.2.2.0.1,HP-SN-MPLS-LSR-MIB::mplsXCUp,,,,,,This notification is generated when the mplsXCOperStatus object for one or more contiguous entries in mplsXCTable are about to enter the up(1) state from some other. The included values of mplsXCOperStatus MUST both be set equal to this other state. The two instances of mplsXCOperStatus in this notification indicate the range of indexes that are affected. Note that all the indexes of the two ends of the range can be derived from the instance identifiers of these two objects. For cases where a contiguous range of cross-connects have transitioned into the up(1) state at roughly the same time, the device SHOULD issue a single notification for each range of contiguous indexes in an effort to minimize the emission of a large number of notifications. If a notification has to be issued for just a single cross-connect entry, then the instance identifier (and values) of the two mplsXCOperStatus objects MUST be the identical.
.1.3.6.1.4.1.11.2.3.7.11.12.2.15.15.2.2.0.2,HP-SN-MPLS-LSR-MIB::mplsXCDown,,,,,, This notification is generated when the mplsXCOperStatus object for one or more contiguous entries in mplsXCTable are about to enter the down(2) state from some other. The included values of mplsXCOperStatus MUST both be set equal to this other state. The two instances of mplsXCOperStatus in this notification indicate the range of indexes that are affected. Note that all the indexes of the two ends of the range can be derived from the instance identifiers of these two objects. For cases where a contiguous range of cross-connects have transitioned into the down(2) state at roughly the same time, the device SHOULD issue a single notification for each range of contiguous indexes in an effort to minimize the emission of a large number of notifications. If a notification has to be issued for just a single cross-connect entry, then the instance identifier (and values) of the two mplsXCOperStatus objects MUST be the identical.
.1.3.6.1.4.1.11.2.3.7.11.12.2.15.15.2.3,HP-SN-MPLS-LSR-MIB::mplsLsrConformance,,,,,,
.1.3.6.1.4.1.11.2.3.7.11.12.2.15.15.2.3.1,HP-SN-MPLS-LSR-MIB::mplsLsrGroups,,,,,,
.1.3.6.1.4.1.11.2.3.7.11.12.2.15.15.2.3.1.1,HP-SN-MPLS-LSR-MIB::mplsInterfaceGroup,,,,,,Collection of objects needed for MPLS interface configuration and performance information.
.1.3.6.1.4.1.11.2.3.7.11.12.2.15.15.2.3.1.2,HP-SN-MPLS-LSR-MIB::mplsInSegmentGroup,,,,,,Collection of objects needed to implement an in- segment.
.1.3.6.1.4.1.11.2.3.7.11.12.2.15.15.2.3.1.3,HP-SN-MPLS-LSR-MIB::mplsOutSegmentGroup,,,,,,Collection of objects needed to implement an out- segment.
.1.3.6.1.4.1.11.2.3.7.11.12.2.15.15.2.3.1.4,HP-SN-MPLS-LSR-MIB::mplsXCGroup,,,,,,Collection of objects needed to implement a cross-connect entry.
.1.3.6.1.4.1.11.2.3.7.11.12.2.15.15.2.3.1.5,HP-SN-MPLS-LSR-MIB::mplsXCOptionalGroup,,,,,,Collection of optional objects for implementing a cross-connect entry.
.1.3.6.1.4.1.11.2.3.7.11.12.2.15.15.2.3.1.6,HP-SN-MPLS-LSR-MIB::mplsPerfGroup,,,,,,Collection of objects providing performance information about an LSR.
.1.3.6.1.4.1.11.2.3.7.11.12.2.15.15.2.3.1.7,HP-SN-MPLS-LSR-MIB::mplsHCInSegmentPerfGroup,,,,,,Object(s) providing performance information specific to out-segments for which the object mplsInterfaceInOctets wraps around too quickly.
.1.3.6.1.4.1.11.2.3.7.11.12.2.15.15.2.3.1.8,HP-SN-MPLS-LSR-MIB::mplsHCOutSegmentPerfGroup,,,,,,Object(s) providing performance information specific to out-segments for which the object mplsInterfaceOutOctets wraps around too quickly.
.1.3.6.1.4.1.11.2.3.7.11.12.2.15.15.2.3.1.9,HP-SN-MPLS-LSR-MIB::mplsTrafficParamGroup,,,,,,Object(s) required for supporting QoS resource reservation.
.1.3.6.1.4.1.11.2.3.7.11.12.2.15.15.2.3.1.10,HP-SN-MPLS-LSR-MIB::mplsXCIsPersistentGroup,,,,,,Objects needed to support persistent cross- connects.
.1.3.6.1.4.1.11.2.3.7.11.12.2.15.15.2.3.1.11,HP-SN-MPLS-LSR-MIB::mplsXCIsNotPersistentGroup,,,,,,Objects needed to support non-persistent cross- connects.
.1.3.6.1.4.1.11.2.3.7.11.12.2.15.15.2.3.1.12,HP-SN-MPLS-LSR-MIB::mplsLabelStackGroup,,,,,,Objects needed to support label stacking.
.1.3.6.1.4.1.11.2.3.7.11.12.2.15.15.2.3.1.13,HP-SN-MPLS-LSR-MIB::mplsSegmentDiscontinuityGroup,,,,,, A collection of objects providing information specific to segment discontinuities..
.1.3.6.1.4.1.11.2.3.7.11.12.2.15.15.2.3.1.14,HP-SN-MPLS-LSR-MIB::mplsLsrNotificationGroup,,,,,,Set of notifications implemented in this module. None is mandatory.
.1.3.6.1.4.1.11.2.3.7.11.12.2.15.15.2.3.2,HP-SN-MPLS-LSR-MIB::mplsLsrCompliances,,,,,,
.1.3.6.1.4.1.11.2.3.7.11.12.2.15.15.2.3.2.1,HP-SN-MPLS-LSR-MIB::mplsLsrModuleCompliance,,,,,,Compliance statement for agents that support the MPLS LSR MIB.
.1.3.6.1.4.1.11.2.3.7.11.12.2.15.15.3,HP-SN-MPLS-TE-MIB::mplsTeMIB,,,,,,This MIB module contains managed object definitions for MPLS Traffic Engineering (TE) as defined in: 1. Extensions to RSVP for LSP Tunnels, Awduche et al, RFC 3209, December 2001 2. Constraint-Based LSP Setup using LDP, Jamoussi (Editor), Internet Draft <draft-ietf-mpls-cr-ldp- 06.txt>, November 2001 3. Requirements for Traffic Engineering Over MPLS, Awduche, D., Malcolm, J., Agogbua, J., O'Dell, M., and J. McManus, RFC 2702, September 1999
.1.3.6.1.4.1.11.2.3.7.11.12.2.15.15.3.1,HP-SN-MPLS-TE-MIB::mplsTeScalars,,,,,,
.1.3.6.1.4.1.11.2.3.7.11.12.2.15.15.3.1.1,HP-SN-MPLS-TE-MIB::mplsTunnelConfigured,Unsigned32,read-only,,current,,The number of tunnels configured on this device. A tunnel is considered configured if the mplsTunnelRowStatus is active(1).
.1.3.6.1.4.1.11.2.3.7.11.12.2.15.15.3.1.2,HP-SN-MPLS-TE-MIB::mplsTunnelActive,Unsigned32,read-only,,current,,The number of tunnels active on this device. A tunnel is considered active if the mplsTunnelOperStatus is up(1).
.1.3.6.1.4.1.11.2.3.7.11.12.2.15.15.3.1.3,HP-SN-MPLS-TE-MIB::mplsTunnelTEDistProto,BITS,read-only,,current,other(0):ospf(1):isis(2),The traffic engineering distribution protocol(s) used by this LSR. Note that an LSR may support more than one distribution protocol simultaneously.
.1.3.6.1.4.1.11.2.3.7.11.12.2.15.15.3.1.4,HP-SN-MPLS-TE-MIB::mplsTunnelMaxHops,Unsigned32,read-only,,current,,The maximum number of hops that can be specified for a tunnel on this device.
.1.3.6.1.4.1.11.2.3.7.11.12.2.15.15.3.2,HP-SN-MPLS-TE-MIB::mplsTeObjects,,,,,,
.1.3.6.1.4.1.11.2.3.7.11.12.2.15.15.3.2.1,HP-SN-MPLS-TE-MIB::mplsTunnelIndexNext,Integer32,read-only,,current,,This object contains the next appropriate value to be used for mplsTunnelIndex when creating entries in mplsTunnelTable. If the number of unassigned entries is exhausted, a retrival operation will return a value of 0. This object may also return a value of 0 when the LSR is unable to accept conceptual row creation, for example, if the mplsTunnelTable is implemented as read-only. To obtain the value of mplsTunnelIndex for a new entry, the manager must first issue a management protocol retrieval operation to obtain the current value of this object. The agent should modify the value to reflect the next unassigned index after each retrieval operation. After a manager retrieves a value the agent will determine through its local policy when this index value will be made available for reuse.
.1.3.6.1.4.1.11.2.3.7.11.12.2.15.15.3.2.2,HP-SN-MPLS-TE-MIB::mplsTunnelTable,,not-accessible,,current,,The mplsTunnelTable allows new MPLS tunnels to be created between an LSR and a remote endpoint, and existing tunnels to be reconfigured or removed. Note that only point-to-point tunnel segments are supported, although multi-point-to-point and point- to-multi-point connections are supported by an LSR acting as a cross-connect. Each MPLS tunnel can thus have one out-segment originating at this LSR and/or one in-segment terminating at this LSR.
.1.3.6.1.4.1.11.2.3.7.11.12.2.15.15.3.2.2.1,HP-SN-MPLS-TE-MIB::mplsTunnelEntry,,not-accessible,mplsTunnelIndex:mplsTunnelInstance:mplsTunnelIngressLSRId:mplsTunnelEgressLSRId,current,,An entry in this table represents an MPLS tunnel. An entry can be created by a network administrator or by an SNMP agent as instructed by an MPLS signaling protocol. Whenever a new entry is created with mplsTunnelIsIf set to true(1), then a corresponding entry is created in ifTable as well (see RFC 2863). The ifType of this entry is mplsTunnel(150).
.1.3.6.1.4.1.11.2.3.7.11.12.2.15.15.3.2.2.1.1,HP-SN-MPLS-TE-MIB::mplsTunnelIndex,Integer32,not-accessible,,current,,Uniquely identifies this row.
.1.3.6.1.4.1.11.2.3.7.11.12.2.15.15.3.2.2.1.2,HP-SN-MPLS-TE-MIB::mplsTunnelInstance,Unsigned32,not-accessible,,current,,Uniquely identifies an instance of a tunnel. It is useful to identify multiple instances of tunnels for the purposes of backup and parallel tunnels.
.1.3.6.1.4.1.11.2.3.7.11.12.2.15.15.3.2.2.1.3,HP-SN-MPLS-TE-MIB::mplsTunnelIngressLSRId,OCTET,not-accessible,,current,,The purpose of this object is to uniquely identity a tunnel within a network. When the MPLS signalling protoocol is rsvp(2) this value SHOULD mimic the Extended Tunnel Id field in the SESSION object. When the MPLS signalling protoocol is crldp(3) this value SHOULD mimic the Ingress LSR Router ID field in the LSPID TLV object.
.1.3.6.1.4.1.11.2.3.7.11.12.2.15.15.3.2.2.1.4,HP-SN-MPLS-TE-MIB::mplsTunnelEgressLSRId,OCTET,not-accessible,,current,,Specifies the egress LSR ID.
.1.3.6.1.4.1.11.2.3.7.11.12.2.15.15.3.2.2.1.5,HP-SN-MPLS-TE-MIB::mplsTunnelName,OCTET,read-create,,current,,The canonical name assigned to the tunnel. This name can be used to refer to the tunnel on the LSR's console port. If mplsTunnelIsIf is set to true then the ifName of the interface corresponding to this tunnel should have a value equal to mplsTunnelName. Also see the description of ifName in RFC 2863.
.1.3.6.1.4.1.11.2.3.7.11.12.2.15.15.3.2.2.1.6,HP-SN-MPLS-TE-MIB::mplsTunnelDescr,OCTET,read-create,,current,,A textual string containing information about the tunnel. If there is no description this object contains a zero length string.
.1.3.6.1.4.1.11.2.3.7.11.12.2.15.15.3.2.2.1.7,HP-SN-MPLS-TE-MIB::mplsTunnelIsIf,INTEGER,read-create,,current,true(1):false(2),Denotes whether or not this tunnel corresponds to an interface represented in the interfaces group table. Note that if this variable is set to true then the ifName of the interface corresponding to this tunnel should have a value equal to mplsTunnelName. Also see the description of ifName in RFC 2863.
.1.3.6.1.4.1.11.2.3.7.11.12.2.15.15.3.2.2.1.8,HP-SN-MPLS-TE-MIB::mplsTunnelIfIndex,Integer32,read-only,,current,,If mplsTunnelIsIf is set to true, then this value contains the LSR-assigned ifIndex which corresponds to an entry in the interfaces table. Otherwise this variable should contain the value of zero indicating that a valid ifIndex was not assigned to this tunnel interface.
.1.3.6.1.4.1.11.2.3.7.11.12.2.15.15.3.2.2.1.9,HP-SN-MPLS-TE-MIB::mplsTunnelXCPointer,OBJECT,read-create,,current,,This variable points to a row in the mplsXCTable. This table identifies the segments that compose this tunnel, their characteristics, and relationships to each other. A value of zeroDotZero indicates that no LSP has been associated with this tunnel yet.
.1.3.6.1.4.1.11.2.3.7.11.12.2.15.15.3.2.2.1.10,HP-SN-MPLS-TE-MIB::mplsTunnelSignallingProto,INTEGER,read-create,,current,none(1):rsvp(2):crldp(3):other(4),The signaling protocol, if any, which was used to setup this tunnel.
.1.3.6.1.4.1.11.2.3.7.11.12.2.15.15.3.2.2.1.11,HP-SN-MPLS-TE-MIB::mplsTunnelSetupPrio,Integer32,read-create,,current,,Indicates the setup priority of this tunnel.
.1.3.6.1.4.1.11.2.3.7.11.12.2.15.15.3.2.2.1.12,HP-SN-MPLS-TE-MIB::mplsTunnelHoldingPrio,Integer32,read-create,,current,,Indicates the holding priority for this tunnel.
.1.3.6.1.4.1.11.2.3.7.11.12.2.15.15.3.2.2.1.13,HP-SN-MPLS-TE-MIB::mplsTunnelSessionAttributes,BITS,read-create,,current,fastReroute(0):mergingPermitted(1):isPersistent(2):isPinned(3):recordRoute(4),This bitmask indicates optional session values for this tunnel. The following describes these bitfields:  fastRerouteThis flag indicates that the any tunnel hop may choose to reroute this tunnel without tearing it down. This flag permits transit routers to use a local repair mechanism which may result in violation of the explicit routing of this tunnel. When a fault is detected on an adjacent downstream link or node, a transit router can reroute traffic for fast service restoration.  mergingPermitted This flag permits transit routers to merge this session with other RSVP sessions for the purpose of reducing resource overhead on downstream transit routers, thereby providing better network scalability.  isPersistent Indicates whether this tunnel should be restored automatically after a failure occurs.  isPinned This flag indicates whether the loose- routed hops of this tunnel are to be pinned.  recordRouteThis flag indicates whether or not the signaling protocol should remember the tunnel path after it has been signaled.
.1.3.6.1.4.1.11.2.3.7.11.12.2.15.15.3.2.2.1.14,HP-SN-MPLS-TE-MIB::mplsTunnelOwner,INTEGER,read-create,,current,admin(1):rsvp(2):crldp(3):policyAgent(4):other(5),Indicates which protocol created and is responsible for managing this tunnel. Values rsvp(2) and crldp(3) should not be used at the head-end of a MPLS tunnel.
.1.3.6.1.4.1.11.2.3.7.11.12.2.15.15.3.2.2.1.15,HP-SN-MPLS-TE-MIB::mplsTunnelLocalProtectInUse,INTEGER,read-create,,current,true(1):false(2),Indicates that the local repair mechanism is in use to maintain this tunnel (usually in the face of an outage of the link it was previously routed over).
.1.3.6.1.4.1.11.2.3.7.11.12.2.15.15.3.2.2.1.16,HP-SN-MPLS-TE-MIB::mplsTunnelResourcePointer,OBJECT,read-create,,current,,This variable represents a pointer to the traffic parameter specification for this tunnel. This value may point at an entry in the mplsTunnelResourceEntry to indicate which mplsTunnelResourceEntry is to be assigned to this segment. This value may optionally point at an externally defined traffic parameter specification table. A value of zeroDotZero indicates best- effort treatment. By having the same value of this object, two or more segments can indicate resource sharing.
.1.3.6.1.4.1.11.2.3.7.11.12.2.15.15.3.2.2.1.17,HP-SN-MPLS-TE-MIB::mplsTunnelInstancePriority,Unsigned32,read-create,,current,,This value indicates which priority, in descending order, with 0 indicating the lowest priority, within a group of tunnel instances. A group of tunnel instances is defined as a set of tunnels with the same mplsTunnelIndex in this table, but with a different mplsTunnelInstance. Tunnel group priorities are used to denote the priority at which a particular tunnel instance will supercede another. Instances of tunnels containing the same mplsTunnelInstancePriority will be used for load sharing.
.1.3.6.1.4.1.11.2.3.7.11.12.2.15.15.3.2.2.1.18,HP-SN-MPLS-TE-MIB::mplsTunnelHopTableIndex,Unsigned32,read-create,,current,,Index into the mplsTunnelHopTable entry that specifies the explicit route hops for this tunnel.
.1.3.6.1.4.1.11.2.3.7.11.12.2.15.15.3.2.2.1.19,HP-SN-MPLS-TE-MIB::mplsTunnelARHopTableIndex,Unsigned32,read-only,,current,,Index into the mplsTunnelARHopTable entry that specifies the actual hops traversed by the tunnel.
.1.3.6.1.4.1.11.2.3.7.11.12.2.15.15.3.2.2.1.20,HP-SN-MPLS-TE-MIB::mplsTunnelCHopTableIndex,Unsigned32,read-only,,current,,Index into the mplsTunnelCHopTable entry that specifies the computed hops traversed by the tunnel.
.1.3.6.1.4.1.11.2.3.7.11.12.2.15.15.3.2.2.1.21,HP-SN-MPLS-TE-MIB::mplsTunnelPrimaryInstance,Unsigned32,read-only,,current,,Specifies the instance index of the primary instance of this tunnel.
.1.3.6.1.4.1.11.2.3.7.11.12.2.15.15.3.2.2.1.22,HP-SN-MPLS-TE-MIB::mplsTunnelPrimaryTimeUp,TimeTicks,read-only,,current,,Specifies the total time the primary instance of this tunnel has been active. The primary instance of this tunnel is defined in mplsTunnelPrimaryInstance.
.1.3.6.1.4.1.11.2.3.7.11.12.2.15.15.3.2.2.1.23,HP-SN-MPLS-TE-MIB::mplsTunnelPathChanges,Counter32,read-only,,current,,Specifies the number of times the paths has changed for this tunnel.
.1.3.6.1.4.1.11.2.3.7.11.12.2.15.15.3.2.2.1.24,HP-SN-MPLS-TE-MIB::mplsTunnelLastPathChange,TimeTicks,read-only,,current,,Specifies the time since the last path change for this tunnel.
.1.3.6.1.4.1.11.2.3.7.11.12.2.15.15.3.2.2.1.25,HP-SN-MPLS-TE-MIB::mplsTunnelCreationTime,TimeTicks,read-only,,current,,Specifies the value of SysUpTime when the first instance of this tunnel came into existence.
.1.3.6.1.4.1.11.2.3.7.11.12.2.15.15.3.2.2.1.26,HP-SN-MPLS-TE-MIB::mplsTunnelStateTransitions,Counter32,read-only,,current,,Specifies the number of times the state of this tunnel instance has changed.
.1.3.6.1.4.1.11.2.3.7.11.12.2.15.15.3.2.2.1.27,HP-SN-MPLS-TE-MIB::mplsTunnelIncludeAnyAffinity,Unsigned32,read-create,,current,,A link satisfies the include-any constraint if and only if the constraint is zero, or the link and the constraint have a resource class in common.
.1.3.6.1.4.1.11.2.3.7.11.12.2.15.15.3.2.2.1.28,HP-SN-MPLS-TE-MIB::mplsTunnelIncludeAllAffinity,Unsigned32,read-create,,current,,A link satisfies the include-all constraint if and only if the link contains all of the adminstrative groups specified in the constraint.
.1.3.6.1.4.1.11.2.3.7.11.12.2.15.15.3.2.2.1.29,HP-SN-MPLS-TE-MIB::mplsTunnelExcludeAllAffinity,Unsigned32,read-create,,current,,A link satisfies the exclude-all constraint if and only if the link contains none of the adminstrative groups specifie in the constraint.
.1.3.6.1.4.1.11.2.3.7.11.12.2.15.15.3.2.2.1.30,HP-SN-MPLS-TE-MIB::mplsTunnelPathInUse,Unsigned32,read-create,,current,,This value denotes the configured path that was chosen for this tunnel. This value reflects the secondary index into mplsTunnelHopTable. This path may not exactly match the one in mplsTunnelARHopTable due to the fact that some CSPF modification may have taken place. See mplsTunnelARHopTable for the actual path being taken by the tunnel. A value of zero denotes that no path is currently in use or available.
.1.3.6.1.4.1.11.2.3.7.11.12.2.15.15.3.2.2.1.31,HP-SN-MPLS-TE-MIB::mplsTunnelRole,INTEGER,read-create,,current,head(1):transit(2):tail(3),This value signifies the role that this tunnel entry/instance represents. This value MUST be set to head(1) at the originating point of the tunnel. This value MUST be set to transit(2) at transit points along the tunnel, if transit points are supported. This value MUST be set to tail(3) at the terminating point of the tunnel if tunnel tails are supported.
.1.3.6.1.4.1.11.2.3.7.11.12.2.15.15.3.2.2.1.32,HP-SN-MPLS-TE-MIB::mplsTunnelTotalUpTime,TimeTicks,read-create,,current,,This value represents the aggregate up time for all instances of this tunnel, if available. If this value is unavailable, it MUST return a value of 0.
.1.3.6.1.4.1.11.2.3.7.11.12.2.15.15.3.2.2.1.33,HP-SN-MPLS-TE-MIB::mplsTunnelInstanceUpTime,TimeTicks,read-create,,current,,This value identifies the total time that this tunnel instance's operStatus has been Up(1).
.1.3.6.1.4.1.11.2.3.7.11.12.2.15.15.3.2.2.1.34,HP-SN-MPLS-TE-MIB::mplsTunnelAdminStatus,INTEGER,read-create,,current,up(1):down(2):testing(3),Indicates the desired operational status of this tunnel.
.1.3.6.1.4.1.11.2.3.7.11.12.2.15.15.3.2.2.1.35,HP-SN-MPLS-TE-MIB::mplsTunnelOperStatus,INTEGER,read-only,,current,up(1):down(2):testing(3):unknown(4):dormant(5):notPresent(6):lowerLayerDown(7),Indicates the actual operational status of this tunnel, which is typically but not limited to, a function of the state of individual segments of this tunnel.
.1.3.6.1.4.1.11.2.3.7.11.12.2.15.15.3.2.2.1.36,HP-SN-MPLS-TE-MIB::mplsTunnelRowStatus,INTEGER,read-create,,current,active(1):notInService(2):notReady(3):createAndGo(4):createAndWait(5):destroy(6),This variable is used to create, modify, and/or delete a row in this table.
.1.3.6.1.4.1.11.2.3.7.11.12.2.15.15.3.2.2.1.37,HP-SN-MPLS-TE-MIB::mplsTunnelStorageType,INTEGER,read-create,,current,other(1):volatile(2):nonVolatile(3):permanent(4):readOnly(5),This variable indicates the storage type for this object.
.1.3.6.1.4.1.11.2.3.7.11.12.2.15.15.3.2.3,HP-SN-MPLS-TE-MIB::mplsTunnelHopListIndexNext,Unsigned32,read-only,,current,,This object contains an appropriate value to be used for mplsTunnelHopListIndex when creating entries in the mplsTunnelHopTable. If the number of unassigned entries is exhausted, a retrival operation will return a value of 0. This object may also return a value of 0 when the LSR is unable to accept conceptual row creation, for example, if the mplsTunnelHopTable is implemented as read-only. To obtain the value of mplsTunnelHopListIndex for a new entry in the mplsTunnelHopTable, the manager issues a management protocol retrieval operation to obtain the current value of mplsTunnelHopIndex. After each retrieval operation, the agent should modify the value to reflect the next unassigned index. After a manager retrieves a value the agent will determine through its local policy when this index value will be made available for reuse.
.1.3.6.1.4.1.11.2.3.7.11.12.2.15.15.3.2.4,HP-SN-MPLS-TE-MIB::mplsTunnelHopTable,,not-accessible,,current,,The mplsTunnelHopTable is used to indicate the hops, strict or loose, for an MPLS tunnel defined in mplsTunnelTable, when it is established via signaling, for the outgoing direction of the tunnel. Each row in this table is indexed by mplsTunnelHopListIndex. Each row also has a secondary index mplsTunnelHopIndex corresponding to the next hop that this row corresponds to. The first row in the table is the first hop after the origination point of the tunnel. In case we want to specify a particular interface on the originating LSR of an outgoing tunnel by which we want packets to exit the LSR, we specify this as the first hop for this tunnel in mplsTunnelHopTable.
.1.3.6.1.4.1.11.2.3.7.11.12.2.15.15.3.2.4.1,HP-SN-MPLS-TE-MIB::mplsTunnelHopEntry,,not-accessible,mplsTunnelHopListIndex:mplsTunnelHopPathOptionIndex:mplsTunnelHopIndex,current,,An entry in this table represents a tunnel hop. An entry is created by a network administrator for signaled ERLSP set up by an MPLS signaling protocol.
.1.3.6.1.4.1.11.2.3.7.11.12.2.15.15.3.2.4.1.1,HP-SN-MPLS-TE-MIB::mplsTunnelHopListIndex,Unsigned32,not-accessible,,current,,Primary index into this table identifying a particular explicit route object.
.1.3.6.1.4.1.11.2.3.7.11.12.2.15.15.3.2.4.1.2,HP-SN-MPLS-TE-MIB::mplsTunnelHopPathOptionIndex,Unsigned32,not-accessible,,current,,Secondary index into this table identifying a particular group of hops representing a particular configured path. This is otherwise known as a path option.
.1.3.6.1.4.1.11.2.3.7.11.12.2.15.15.3.2.4.1.3,HP-SN-MPLS-TE-MIB::mplsTunnelHopIndex,Unsigned32,not-accessible,,current,,Secondary index into this table identifying a particular hop.
.1.3.6.1.4.1.11.2.3.7.11.12.2.15.15.3.2.4.1.4,HP-SN-MPLS-TE-MIB::mplsTunnelHopAddrType,INTEGER,read-create,,current,ipV4(1):ipV6(2):asNumber(3):lspid(4),Denotes the address type of this tunnel hop. Note that lspId(4) is a valid option only for tunnels signaled via CRLDP.
.1.3.6.1.4.1.11.2.3.7.11.12.2.15.15.3.2.4.1.5,HP-SN-MPLS-TE-MIB::hop.,OCTET,read-create,,current,,If mplsTunnelHopAddrType is set to ipV4(1), then this value will contain the IPv4 address of this then this value will contain the Ingress LSR Router ID of the Tunnel. This object is otherwise insignificant and should contain a value of 0.
.1.3.6.1.4.1.11.2.3.7.11.12.2.15.15.3.2.4.1.6,HP-SN-MPLS-TE-MIB::mplsTunnelHopIpv4PrefixLen,Unsigned32,read-create,,current,,If mplsTunnelHopAddrType is ipV4(1), then the prefix length for this hop's IPv4 address is contained herein. This object is otherwise insignificant and should contain a value of 0.
.1.3.6.1.4.1.11.2.3.7.11.12.2.15.15.3.2.4.1.7,HP-SN-MPLS-TE-MIB::mplsTunnelHopIpv6Addr,OCTET,read-create,,current,,If the mplsTunnelHopAddrType is set to ipV6(2), then this variable contains the IPv6 address of this hop. This object is otherwise insignificant and should contain a value of 0.
.1.3.6.1.4.1.11.2.3.7.11.12.2.15.15.3.2.4.1.8,HP-SN-MPLS-TE-MIB::mplsTunnelHopIpv6PrefixLen,Unsigned32,read-create,,current,,If mplsTunnelHopAddrType is set to ipV6(2), this value will contain the prefix length for this hop's IPv6 address. This object is otherwise insignificant and should contain a value of 0.
.1.3.6.1.4.1.11.2.3.7.11.12.2.15.15.3.2.4.1.9,HP-SN-MPLS-TE-MIB::mplsTunnelHopAsNumber,Unsigned32,read-create,,current,,If mplsTunnelHopAddrType is set to asNumber(3), then this value will contain the AS number of this hop. This object is otherwise insignificant and should contain a value of 0 to indicate this fact.
.1.3.6.1.4.1.11.2.3.7.11.12.2.15.15.3.2.4.1.10,HP-SN-MPLS-TE-MIB::mplsTunnelHopLspId,OCTET,read-create,,current,,If mplsTunnelHopAddrType is set to lspid(4), then this value will contain the LSPID of a tunnel of this hop. The present tunnel being configured is tunneled through this hop (using label stacking). This object is otherwise insignificant and should contain a value of 0 to indicate this fact.
.1.3.6.1.4.1.11.2.3.7.11.12.2.15.15.3.2.4.1.11,HP-SN-MPLS-TE-MIB::mplsTunnelHopType,INTEGER,read-create,,current,strict(1):loose(2),Denotes whether this tunnel hop is routed in a strict or loose fashion.
.1.3.6.1.4.1.11.2.3.7.11.12.2.15.15.3.2.4.1.12,HP-SN-MPLS-TE-MIB::mplsTunnelHopIncludeExclude,INTEGER,read-create,,current,include(1):exclude(2),If this value is set to include(1), then this indicates that this hop must be included in the tunnel's path. If this value is set to exclude(2), then this hop must be avoided when calculating the path for this tunnel. The default value of this object is include(1), so that by default all indicated hops are included in the CSPF path computation.
.1.3.6.1.4.1.11.2.3.7.11.12.2.15.15.3.2.4.1.13,HP-SN-MPLS-TE-MIB::mplsTunnelHopPathOptionName,OCTET,read-create,,current,,The description of this series of hops as they relate to the specified path option.
.1.3.6.1.4.1.11.2.3.7.11.12.2.15.15.3.2.4.1.14,HP-SN-MPLS-TE-MIB::mplsTunnelHopEntryPathComp,INTEGER,read-create,,current,dynamic(1):explicit(2),If this value is set to dynamic, then the user should only specify the source and destination of the path and expect that the CSPF will calculate the remainder of the path. If this value is set to explicit, the user should specify the entire path for the tunnel to take. This path may contain strict or loose hops. Each hop along a specific path should have this object set to the same value
.1.3.6.1.4.1.11.2.3.7.11.12.2.15.15.3.2.4.1.15,HP-SN-MPLS-TE-MIB::mplsTunnelHopRowStatus,INTEGER,read-create,,current,active(1):notInService(2):notReady(3):createAndGo(4):createAndWait(5):destroy(6),This variable is used to create, modify, and/or delete a row in this table.
.1.3.6.1.4.1.11.2.3.7.11.12.2.15.15.3.2.4.1.16,HP-SN-MPLS-TE-MIB::mplsTunnelHopStorageType,INTEGER,read-create,,current,other(1):volatile(2):nonVolatile(3):permanent(4):readOnly(5),This variable indicates the storage type for this object.
.1.3.6.1.4.1.11.2.3.7.11.12.2.15.15.3.2.5,HP-SN-MPLS-TE-MIB::mplsTunnelResourceIndexNext,Unsigned32,read-only,,current,,This object contains the next appropriate value to be used for mplsTunnelResourceIndex when creating entries in the mplsTunnelResourceTable. If the number of unassigned entries is exhausted, a retrival operation will return a value of 0. This object may also return a value of 0 when the LSR is unable to accept conceptual row creation, for example, if the mplsTunnelTable is implemented as read-only. To obtain the mplsTunnelResourceIndex value for a new entry, the manager must first issue a management protocol retrieval operation to obtain the current value of this object. The agent should modify the value to reflect the next unassigned index after each retrieval operation. After a manager retrieves a value the agent will determine through its local policy when this index value will be made available for reuse.
.1.3.6.1.4.1.11.2.3.7.11.12.2.15.15.3.2.6,HP-SN-MPLS-TE-MIB::mplsTunnelResourceTable,,not-accessible,,current,,The mplsTunnelResourceTable allows a manager to specify which resources are desired for an MPLS tunnel. This table also allows several tunnels to point to a single entry in this table, implying that these tunnels should share resources.
.1.3.6.1.4.1.11.2.3.7.11.12.2.15.15.3.2.6.1,HP-SN-MPLS-TE-MIB::mplsTunnelResourceEntry,,not-accessible,mplsTunnelResourceIndex,current,,An entry in this table represents a set of resources for an MPLS tunnel. An entry can be created by a network administrator or by an SNMP agent as instructed by any MPLS signaling protocol.
.1.3.6.1.4.1.11.2.3.7.11.12.2.15.15.3.2.6.1.1,HP-SN-MPLS-TE-MIB::mplsTunnelResourceIndex,Unsigned32,not-accessible,,current,,Uniquely identifies this row.
.1.3.6.1.4.1.11.2.3.7.11.12.2.15.15.3.2.6.1.2,HP-SN-MPLS-TE-MIB::mplsTunnelResourceMaxRate,Integer32,read-create,,current,,The maximum rate in bits/second. Note that setting mplsTunnelResourceMaxRate, mplsTunnelResourceMeanRate, and mplsTunnelResourceMaxBurstSize to 0 indicates best- effort treatment. This object is copied to an instance of mplsTrafficParamMaxRate in mplsTrafficParamTable the OID of which is copied into the corresponding mplsInSegmentTrafficParamPtr.
.1.3.6.1.4.1.11.2.3.7.11.12.2.15.15.3.2.6.1.3,HP-SN-MPLS-TE-MIB::mplsTunnelResourceMeanRate,Integer32,read-create,,current,,This object is copied into an instance of mplsTrafficParamMeanRate in the mplsTrafficParamTable. The OID of this table entry is then copied into the corresponding mplsInSegmentTrafficParamPtr.  When resource allocation is performed as requested by this TSpec object, it is copied into an entry in mplsTrafficParamTable [LSRMIB]: mplsTunnelInMeanRate to mplsTrafficParamMeanRate. The OID of this entry is copied to mplsInSegmentTrafficParamPtr of the corresponding in-segment entry.
.1.3.6.1.4.1.11.2.3.7.11.12.2.15.15.3.2.6.1.4,HP-SN-MPLS-TE-MIB::mplsTunnelResourceMaxBurstSize,Unsigned32,read-create,,current,,The maximum burst size in bytes. This object is copied to mplsInSegmentMaxBurstSize of the corresponding in-segment.  When resource allocation is performed as requested by this TSpec object, it is copied into an entry in mplsTrafficParamTable [LSRMIB]: mplsTunnelInMaxBurstSize to mplsTrafficParamMaxBurstSize. The OID of this entry is copied to mplsInSegmentTrafficParamPtr of the corresponding in-segment entry.
.1.3.6.1.4.1.11.2.3.7.11.12.2.15.15.3.2.6.1.5,HP-SN-MPLS-TE-MIB::mplsTunnelResourceMeanBurstSize,Unsigned32,read-create,,current,,The mean burst size in bytes. The implementations which do not implement this variable must return 0 for this value and must not allow a user to set this value.
.1.3.6.1.4.1.11.2.3.7.11.12.2.15.15.3.2.6.1.6,HP-SN-MPLS-TE-MIB::mplsTunnelResourceExcessBurstSize,Unsigned32,read-create,,current,,The Excess burst size in bytes. The implementations which do not implement this variable must return 0 for this value and must not allow a user to set this value.
.1.3.6.1.4.1.11.2.3.7.11.12.2.15.15.3.2.6.1.7,HP-SN-MPLS-TE-MIB::mplsTunnelResourceFrequency,INTEGER,read-create,,current,unspecified(1):frequent(2):veryFrequent(3),The granularity of the availability of committed rate. The implementations which do not implement this variable must return unspecified(1) for this value and must not allow a user to set this value.
.1.3.6.1.4.1.11.2.3.7.11.12.2.15.15.3.2.6.1.8,HP-SN-MPLS-TE-MIB::mplsTunnelResourceWeight,Unsigned32,read-create,,current,,The relative weight for using excess bandwidth above its committed rate. The value of 0 means that weight is not applicable for the CR-LSP.
.1.3.6.1.4.1.11.2.3.7.11.12.2.15.15.3.2.6.1.9,HP-SN-MPLS-TE-MIB::mplsTunnelResourceRowStatus,INTEGER,read-create,,current,active(1):notInService(2):notReady(3):createAndGo(4):createAndWait(5):destroy(6),This variable is used to create, modify, and/or delete a row in this table.
.1.3.6.1.4.1.11.2.3.7.11.12.2.15.15.3.2.6.1.10,HP-SN-MPLS-TE-MIB::mplsTunnelResourceStorageType,INTEGER,read-create,,current,other(1):volatile(2):nonVolatile(3):permanent(4):readOnly(5),This variable indicates the storage type for this object.
.1.3.6.1.4.1.11.2.3.7.11.12.2.15.15.3.2.7,HP-SN-MPLS-TE-MIB::mplsTunnelARHopTable,,not-accessible,,current,,The mplsTunnelARHopTable is used to indicate the hops, strict or loose, for an MPLS tunnel defined in mplsTunnelTable, as reported by the MPLS signaling protocol, for the outgoing direction of the tunnel. Each row in this table is indexed by mplsTunnelARHopListIndex. Each row also has a secondary index mplsTunnelARHopIndex, corresponding to the next hop that this row corresponds to. The first row in the table is the first hop after the origination point of the tunnel. In case we want to specify a particular interface on the originating LSR of an outgoing tunnel by which we want packets to exit the LSR, we specify this as the first hop for this tunnel in mplsTunnelARHopTable.  Please note that since the information necessary to build entries within this table are not provided by some MPLS signaling protocols, implementation of this table is optional. Furthermore, since the information in this table is actually provided by the MPLS signaling protocol after the path has been set-up, the entries in this table are provided only for observation, and hence, all variables in this table are accessible exclusively as read-only.
.1.3.6.1.4.1.11.2.3.7.11.12.2.15.15.3.2.7.1,HP-SN-MPLS-TE-MIB::mplsTunnelARHopEntry,,not-accessible,mplsTunnelARHopListIndex:mplsTunnelARHopIndex,current,,An entry in this table represents a tunnel hop. An entry is created by a network administrator for signaled ERLSP set up by an MPLS signaling protocol.
.1.3.6.1.4.1.11.2.3.7.11.12.2.15.15.3.2.7.1.1,HP-SN-MPLS-TE-MIB::mplsTunnelARHopListIndex,Unsigned32,not-accessible,,current,,Primary index into this table identifying a particular recorded hop list.
.1.3.6.1.4.1.11.2.3.7.11.12.2.15.15.3.2.7.1.2,HP-SN-MPLS-TE-MIB::mplsTunnelARHopIndex,Unsigned32,not-accessible,,current,,Secondary index into this table identifying the particular hop.
.1.3.6.1.4.1.11.2.3.7.11.12.2.15.15.3.2.7.1.3,HP-SN-MPLS-TE-MIB::mplsTunnelARHopAddrType,INTEGER,read-only,,current,ipV4(1):ipV6(2):asNumber(3):lspId(4),Denotes the address type of this tunnel hop.
.1.3.6.1.4.1.11.2.3.7.11.12.2.15.15.3.2.7.1.4,HP-SN-MPLS-TE-MIB::mplsTunnelARHopIpv4Addr,OCTET,read-only,,current,,If mplsTunnelARHopAddrType is set to ipV4(1), then this value will contain the IPv4 address of this hop. This object is otherwise insignificant and should contain a value of 0.
.1.3.6.1.4.1.11.2.3.7.11.12.2.15.15.3.2.7.1.5,HP-SN-MPLS-TE-MIB::mplsTunnelARHopIpv4PrefixLen,Unsigned32,read-only,,current,,If mplsTunnelARHopAddrType is ipV4(1), then the prefix length for this hop's IPv4 address is contained herein. This object is otherwise insignificant and should contain a value of 0.
.1.3.6.1.4.1.11.2.3.7.11.12.2.15.15.3.2.7.1.6,HP-SN-MPLS-TE-MIB::mplsTunnelARHopIpv6Addr,OCTET,read-only,,current,,If the mplsTunnelARHopAddrType is set to ipV6(2), then this variable contains the IPv6 address of this hop. This object is otherwise insignificant and should contain a value of 0.
.1.3.6.1.4.1.11.2.3.7.11.12.2.15.15.3.2.7.1.7,HP-SN-MPLS-TE-MIB::mplsTunnelARHopIpv6PrefixLen,Unsigned32,read-only,,current,,If mplsTunnelARHopAddrType is set to ipV6(2), this value will contain the prefix length for this hop's IPv6 address. This object is otherwise insignificant and should contain a value of 0.
.1.3.6.1.4.1.11.2.3.7.11.12.2.15.15.3.2.7.1.8,HP-SN-MPLS-TE-MIB::mplsTunnelARHopAsNumber,Unsigned32,read-only,,current,,If mplsTunnelARHopAddrType is set to asNumber(3), then this value will contain the AS number of this hop. This object is otherwise insignificant and should contain a value of 0 to indicate this fact.
.1.3.6.1.4.1.11.2.3.7.11.12.2.15.15.3.2.7.1.9,HP-SN-MPLS-TE-MIB::mplsTunnelARHopLspId,OCTET,read-only,,current,,If mplsTunnelARHopAddrType is set to lspid(4), then this value will contain the LSP ID of this hop. This object is otherwise insignificant and should contain a value of 0 to indicate this fact.
.1.3.6.1.4.1.11.2.3.7.11.12.2.15.15.3.2.8,HP-SN-MPLS-TE-MIB::mplsTunnelCHopTable,,not-accessible,,current,,The mplsTunnelCHopTable is used to indicate the hops, strict or loose, for an MPLS tunnel defined in mplsTunnelTable, as computed by a constraint- based routing protocol, based on the mplsTunnelHopTable for the outgoing direction of the tunnel. Each row in this table is indexed by mplsTunnelCHopListIndex. Each row also has a secondary index mplsTunnelCHopIndex, corresponding to the next hop that this row corresponds to. The first row in the table is the first hop after the origination point of the tunnel. In case we want to specify a particular interface on the originating LSR of an outgoing tunnel by which we want packets to exit the LSR, we specify this as the first hop for this tunnel in mplsTunnelCHopTable.  Please note that since the information necessary to build entries within this table may not be supported by some LSRs, implementation of this table is optional. Furthermore, since the information in this table is actually provided by routing protocol after the path has been computed, the entries in this table are provided only for observation, and hence, all variables in this table are accessible exclusively as read-only.
.1.3.6.1.4.1.11.2.3.7.11.12.2.15.15.3.2.8.1,HP-SN-MPLS-TE-MIB::mplsTunnelCHopEntry,,not-accessible,mplsTunnelCHopListIndex:mplsTunnelCHopIndex,current,,An entry in this table represents a tunnel hop. An entry in this table is created by a constraint- based routing protocol based on the hops specified in the corresponding mplsTunnelHopTable.
.1.3.6.1.4.1.11.2.3.7.11.12.2.15.15.3.2.8.1.1,HP-SN-MPLS-TE-MIB::mplsTunnelCHopListIndex,Unsigned32,not-accessible,,current,,Primary index into this table identifying a particular computed hop list.
.1.3.6.1.4.1.11.2.3.7.11.12.2.15.15.3.2.8.1.2,HP-SN-MPLS-TE-MIB::mplsTunnelCHopIndex,Unsigned32,not-accessible,,current,,Secondary index into this table identifying the particular hop.
.1.3.6.1.4.1.11.2.3.7.11.12.2.15.15.3.2.8.1.3,HP-SN-MPLS-TE-MIB::mplsTunnelCHopAddrType,INTEGER,read-only,,current,ipV4(1):ipV6(2):asNumber(3):lspId(4),Denotes the address type of this tunnel hop. Note that lspId(4) is a valid option only for tunnels signaled via CRLDP.
.1.3.6.1.4.1.11.2.3.7.11.12.2.15.15.3.2.8.1.4,HP-SN-MPLS-TE-MIB::mplsTunnelCHopIpv4Addr,OCTET,read-only,,current,,If mplsTunnelCHopAddrType is set to ipV4(1), then this value will contain the IPv4 address of this hop. This object is otherwise insignificant and should contain a value of 0.
.1.3.6.1.4.1.11.2.3.7.11.12.2.15.15.3.2.8.1.5,HP-SN-MPLS-TE-MIB::mplsTunnelCHopIpv4PrefixLen,Unsigned32,read-only,,current,,If mplsTunnelCHopAddrType is ipV4(1), then the prefix length for this hop's IPv4 address is contained herein. This object is otherwise insignificant and should contain a value of 0.
.1.3.6.1.4.1.11.2.3.7.11.12.2.15.15.3.2.8.1.6,HP-SN-MPLS-TE-MIB::mplsTunnelCHopIpv6Addr,OCTET,read-only,,current,,If the mplsTunnelCHopAddrType is set to ipV6(2), then this variable contains the IPv6 address of this hop. This object is otherwise insignificant and should contain a value of 0.
.1.3.6.1.4.1.11.2.3.7.11.12.2.15.15.3.2.8.1.7,HP-SN-MPLS-TE-MIB::mplsTunnelCHopIpv6PrefixLen,Unsigned32,read-only,,current,,If mplsTunnelCHopAddrType is set to ipV6(2), this value will contain the prefix length for this hop's IPv6 address. This object is otherwise insignificant and should contain a value of 0.
.1.3.6.1.4.1.11.2.3.7.11.12.2.15.15.3.2.8.1.8,HP-SN-MPLS-TE-MIB::mplsTunnelCHopAsNumber,Unsigned32,read-only,,current,,If mplsTunnelCHopAddrType is set to asNumber(3), then this value will contain the AS number of this hop. This object is otherwise insignificant and should contain a value of 0 to indicate this fact.
.1.3.6.1.4.1.11.2.3.7.11.12.2.15.15.3.2.8.1.9,HP-SN-MPLS-TE-MIB::mplsTunnelCHopLspId,OCTET,read-only,,current,,If mplsTunnelCHopAddrType is set to lspid(4), then this value will contain the LSP ID of this hop. This object is otherwise insignificant and should contain a value of 0 to indicate this fact.
.1.3.6.1.4.1.11.2.3.7.11.12.2.15.15.3.2.8.1.10,HP-SN-MPLS-TE-MIB::mplsTunnelCHopType,INTEGER,read-only,,current,strict(1):loose(2),Denotes whether this is tunnel hop is routed in a strict or loose fashion.
.1.3.6.1.4.1.11.2.3.7.11.12.2.15.15.3.2.9,HP-SN-MPLS-TE-MIB::mplsTunnelPerfTable,,not-accessible,,current,,This table provides per-tunnel MPLS performance information.
.1.3.6.1.4.1.11.2.3.7.11.12.2.15.15.3.2.9.1,HP-SN-MPLS-TE-MIB::mplsTunnelPerfEntry,,not-accessible,,current,,An entry in this table is created by the LSR for every tunnel. Its is an extension to mplsTunnelEntry.
.1.3.6.1.4.1.11.2.3.7.11.12.2.15.15.3.2.9.1.1,HP-SN-MPLS-TE-MIB::mplsTunnelPerfPackets,Counter32,read-only,,current,,Number of packets forwarded by the tunnel.
.1.3.6.1.4.1.11.2.3.7.11.12.2.15.15.3.2.9.1.2,HP-SN-MPLS-TE-MIB::mplsTunnelPerfHCPackets,Counter64,read-only,,current,,High capacity counter for number of packets forwarded by the tunnel.
.1.3.6.1.4.1.11.2.3.7.11.12.2.15.15.3.2.9.1.3,HP-SN-MPLS-TE-MIB::mplsTunnelPerfErrors,Counter32,read-only,,current,,Number of errored packets.
.1.3.6.1.4.1.11.2.3.7.11.12.2.15.15.3.2.9.1.4,HP-SN-MPLS-TE-MIB::mplsTunnelPerfBytes,Counter32,read-only,,current,,Number of bytes forwarded by the tunnel.
.1.3.6.1.4.1.11.2.3.7.11.12.2.15.15.3.2.9.1.5,HP-SN-MPLS-TE-MIB::mplsTunnelPerfHCBytes,Counter64,read-only,,current,,High capacity counter for number of bytes forwarded by the tunnel.
.1.3.6.1.4.1.11.2.3.7.11.12.2.15.15.3.2.10,HP-SN-MPLS-TE-MIB::mplsTunnelCRLDPResTable,,not-accessible,,current,,The mplsTunnelCRLDPResTable allows a manager to specify which CR-LDP-specific resources are desired for an MPLS tunnel if that tunnel is signaled using CR-LDP. Note that these attributes are in addition to those specified in mplsTunnelResourceTable. This table also allows several tunnels to point to a single entry in this table, implying that these tunnels should share resources.
.1.3.6.1.4.1.11.2.3.7.11.12.2.15.15.3.2.10.1,HP-SN-MPLS-TE-MIB::mplsTunnelCRLDPResEntry,,not-accessible,mplsTunnelResourceIndex,current,,An entry in this table represents a set of resources for an MPLS tunnel established using CRLDP (mplsTunnelSignallingProto equal to crldp (3)). An entry can be created by a network administrator or by an SNMP agent as instructed by any MPLS signaling protocol.
.1.3.6.1.4.1.11.2.3.7.11.12.2.15.15.3.2.10.1.2,HP-SN-MPLS-TE-MIB::mplsTunnelCRLDPResMeanBurstSize,Unsigned32,read-create,,current,,The mean burst size in bytes.
.1.3.6.1.4.1.11.2.3.7.11.12.2.15.15.3.2.10.1.3,HP-SN-MPLS-TE-MIB::mplsTunnelCRLDPResExcessBurstSize,Unsigned32,read-create,,current,,The Excess burst size in bytes.
.1.3.6.1.4.1.11.2.3.7.11.12.2.15.15.3.2.10.1.4,HP-SN-MPLS-TE-MIB::mplsTunnelCRLDPResFrequency,INTEGER,read-create,,current,unspecified(1):frequent(2):veryFrequent(3),The granularity of the availability of committed rate.
.1.3.6.1.4.1.11.2.3.7.11.12.2.15.15.3.2.10.1.5,HP-SN-MPLS-TE-MIB::mplsTunnelCRLDPResWeight,Unsigned32,read-create,,current,,The relative weight for using excess bandwidth above its committed rate. The value of 0 means that weight is not applicable for the CR-LSP.
.1.3.6.1.4.1.11.2.3.7.11.12.2.15.15.3.2.10.1.6,HP-SN-MPLS-TE-MIB::mplsTunnelCRLDPResFlags,Unsigned32,read-create,,current,,The value of the 1 byte Flags conveyed as part of the traffic parameters during the establishment of the CRLSP. The bits in this object are to be interpreted as follows.  +--+--+--+--+--+--+--+--+ | Res |F6|F5|F4|F3|F2|F1| +--+--+--+--+--+--+--+--+  Res - These bits are reserved. Zero on transmission. Ignored on receipt. F1 - Corresponds to the PDR. F2 - Corresponds to the PBS. F3 - Corresponds to the CDR. F4 - Corresponds to the CBS. F5 - Corresponds to the EBS. F6 - Corresponds to the Weight.  Each flag if is a Negotiable Flag corresponding to a Traffic Parameter. The Negotiable Flag value zero denotes Not Negotiable and value one denotes Negotiable.
.1.3.6.1.4.1.11.2.3.7.11.12.2.15.15.3.2.10.1.7,HP-SN-MPLS-TE-MIB::mplsTunnelCRLDPResRowStatus,INTEGER,read-create,,current,active(1):notInService(2):notReady(3):createAndGo(4):createAndWait(5):destroy(6),This variable is used to create, modify, and/or delete a row in this table.
.1.3.6.1.4.1.11.2.3.7.11.12.2.15.15.3.2.10.1.8,HP-SN-MPLS-TE-MIB::mplsTunnelCRLDPResStorageType,INTEGER,read-create,,current,other(1):volatile(2):nonVolatile(3):permanent(4):readOnly(5),This variable indicates the storage type for this object.
.1.3.6.1.4.1.11.2.3.7.11.12.2.15.15.3.2.11,HP-SN-MPLS-TE-MIB::mplsTunnelTrapEnable,INTEGER,read-write,,current,true(1):false(2),If this object is true, then it enables the generation of mplsTunnelUp and mplsTunnelDown traps, otherwise these traps are not emitted.
.1.3.6.1.4.1.11.2.3.7.11.12.2.15.15.3.3,HP-SN-MPLS-TE-MIB::mplsTeNotifications,,,,,,
.1.3.6.1.4.1.11.2.3.7.11.12.2.15.15.3.3.0,HP-SN-MPLS-TE-MIB::mplsTeNotifyPrefix,,,,,,
.1.3.6.1.4.1.11.2.3.7.11.12.2.15.15.3.3.0.1,HP-SN-MPLS-TE-MIB::mplsTunnelUp,,,,,,This notification is generated when a mplsTunnelOperStatus object for one of the configured tunnels is about to leave the down state and transition into some other state (but not into the notPresent state). This other state is indicated by the included value of mplsTunnelOperStatus.
.1.3.6.1.4.1.11.2.3.7.11.12.2.15.15.3.3.0.2,HP-SN-MPLS-TE-MIB::mplsTunnelDown,,,,,,This notification is generated when a mplsTunnelOperStatus object for one of the configured tunnels is about to enter the down state from some other state (but not from the notPresent state). This other state is indicated by the included value of mplsTunnelOperStatus.
.1.3.6.1.4.1.11.2.3.7.11.12.2.15.15.3.3.0.3,HP-SN-MPLS-TE-MIB::mplsTunnelRerouted,,,,,,This notification is generated when a tunnel is rerouted. If the actual path is used, then this tunnel's entry MAY contain the new path for this tunnel some time after this trap is issued by the agent.
.1.3.6.1.4.1.11.2.3.7.11.12.2.15.15.3.3.0.4,HP-SN-MPLS-TE-MIB::mplsTunnelReoptimized,,,,,,This notification is generated when a tunnel is reoptimized. If the actual path is used, then this tunnel's entry MAY contain the new path for this tunnel some time after this trap is issued by the agent.
.1.3.6.1.4.1.11.2.3.7.11.12.2.15.15.3.4,HP-SN-MPLS-TE-MIB::mplsTeConformance,,,,,,
.1.3.6.1.4.1.11.2.3.7.11.12.2.15.15.3.4.1,HP-SN-MPLS-TE-MIB::mplsTeGroups,,,,,,
.1.3.6.1.4.1.11.2.3.7.11.12.2.15.15.3.4.1.1,HP-SN-MPLS-TE-MIB::mplsTunnelGroup,,,,,,Necessary, but not sufficient, set of objects to implement tunnels. In addition, depending on the type of the tunnels supported (for example, manually configured or signaled, persistent or non- persistent, etc.), the following other groups defined below are mandatory: mplsTunnelManualGroup and/or mplsTunnelSignaledGroup, mplsTunnelIsNotIntfcGroup and/or mplsTunnelIsIntfcGroup.
.1.3.6.1.4.1.11.2.3.7.11.12.2.15.15.3.4.1.2,HP-SN-MPLS-TE-MIB::mplsTunnelManualGroup,,,,,,Object(s) needed to implement manually configured tunnels.
.1.3.6.1.4.1.11.2.3.7.11.12.2.15.15.3.4.1.3,HP-SN-MPLS-TE-MIB::mplsTunnelSignaledGroup,,,,,,Object needed to implement signaled tunnels.
.1.3.6.1.4.1.11.2.3.7.11.12.2.15.15.3.4.1.4,HP-SN-MPLS-TE-MIB::mplsTunnelScalarGroup,,,,,,Scalar object needed to implement MPLS tunnels.
.1.3.6.1.4.1.11.2.3.7.11.12.2.15.15.3.4.1.5,HP-SN-MPLS-TE-MIB::mplsTunnelIsIntfcGroup,,,,,,Objects needed to implement tunnels that are interfaces.
.1.3.6.1.4.1.11.2.3.7.11.12.2.15.15.3.4.1.6,HP-SN-MPLS-TE-MIB::mplsTunnelIsNotIntfcGroup,,,,,,Objects needed to implement tunnels that are not interfaces.
.1.3.6.1.4.1.11.2.3.7.11.12.2.15.15.3.4.1.7,HP-SN-MPLS-TE-MIB::mplsTunnelOptionalGroup,,,,,,The objects in this group are optional.
.1.3.6.1.4.1.11.2.3.7.11.12.2.15.15.3.4.1.8,HP-SN-MPLS-TE-MIB::mplsTunnelCRLDPResOptionalGroup,,,,,,Set of objects implemented for resources applicable for tunnels signaled using CR-LDP.
.1.3.6.1.4.1.11.2.3.7.11.12.2.15.15.3.4.1.9,HP-SN-MPLS-TE-MIB::mplsTeNotificationGroup,,,,,,Set of notifications implemented in this module. None is mandatory.
.1.3.6.1.4.1.11.2.3.7.11.12.2.15.15.3.4.2,HP-SN-MPLS-TE-MIB::mplsTeCompliances,,,,,,
.1.3.6.1.4.1.11.2.3.7.11.12.2.15.15.3.4.2.1,HP-SN-MPLS-TE-MIB::mplsTeModuleCompliance,,,,,,Compliance statement for agents that support the MPLS TE MIB.
.1.3.6.1.4.1.11.2.3.7.11.13,HP-ICF-OID::hpSwitch9308,,,,,,The authoritative identifier for the J4138A HP 9308M Switch.
.1.3.6.1.4.1.11.2.3.7.11.14,HP-ICF-OID::hpSwitch9304,,,,,,The authoritative identifier for the J4139A HP 9304M Routing Switch.
.1.3.6.1.4.1.11.2.3.7.11.15,HP-ICF-OID::hpSwitch6308,,,,,,The authoritative identifier for the J4840A HP 6308M Switch.
.1.3.6.1.4.1.11.2.3.7.11.16,HP-ICF-OID::hpSwitch6208,,,,,,The authoritative identifier for the J4841A HP 6208M Switch.
.1.3.6.1.4.1.11.2.3.7.11.17,HP-ICF-OID::hpSwitchJ4819A,,,,,,The authoritative identifier for the J4819A HP 5308XL Switch.
.1.3.6.1.4.1.11.2.3.7.11.17.1,HP-ICF-OID::hpSwitchPortModuleJ4820A,,,,,,The authoritative identifier for the HP J4820A 24 Port 10/100Base-TX Module.
.1.3.6.1.4.1.11.2.3.7.11.17.2,HP-ICF-OID::hpSwitchPortModuleJ4821A,,,,,,The authoritative identifier for the HP J4821A 4 Port 100/1000Base-TX Module.
.1.3.6.1.4.1.11.2.3.7.11.17.3,HP-ICF-OID::hpSwitchPortModuleJ4878A,,,,,,The authoritative identifier for the HP J4878A 4x MiniGBIC Module.
.1.3.6.1.4.1.11.2.3.7.11.17.4,HP-ICF-OID::hpSwitchModuleJ4852A,,,,,,The authoritative identifier for the HP J4852A 12-port 100-FX MTRJ
.1.3.6.1.4.1.11.2.3.7.11.17.5,HP-ICF-OID::hpSwitchModuleJ8161A,,,,,,The authoritative identifier for the HP J8161A 24-port 10/100Base-TX PoE Module.
.1.3.6.1.4.1.11.2.3.7.11.17.6,HP-ICF-OID::hpSwitchModuleJ4907A,,,,,,The authoritative identifier for the HP J4907A Gig-T/GBIC xl Module.
.1.3.6.1.4.1.11.2.3.7.11.17.7,HP-ICF-OID::hpSwitchModuleJ8162A,,,,,,The authoritative identifier for the HP J8162A XL Access Controller Module.
.1.3.6.1.4.1.11.2.3.7.11.17.7.1,HP-BASE-MIB::hpProcurveCommon,,,,,,
.1.3.6.1.4.1.11.2.3.7.11.17.7.1.1,HP-SYSTEM-MIB::hpProcurveSystem,,,,,,This MIB module describes objects for basic product line.
.1.3.6.1.4.1.11.2.3.7.11.17.7.1.1.0,HP-SYSTEM-MIB::hpSystemTraps,,,,,,
.1.3.6.1.4.1.11.2.3.7.11.17.7.1.1.0.1,HP-SYSTEM-MIB::fanDown,,,,,,A fanDown trap signifies that hpFanOperational has
.1.3.6.1.4.1.11.2.3.7.11.17.7.1.1.0.2,HP-SYSTEM-MIB::fanUp,,,,,,A fanUp trap signifies that hpFanOperational has
.1.3.6.1.4.1.11.2.3.7.11.17.7.1.1.0.3,HP-SYSTEM-MIB::temperatureAlarm,,,,,,A temperatureAlarm signifies that the SNMP 
.1.3.6.1.4.1.11.2.3.7.11.17.7.1.1.0.4,HP-SYSTEM-MIB::hpFailover,,,,,,A hpFailover signifies that the SNMP  become the primary system. This notification will only be sent by what was formerly the standby system.
.1.3.6.1.4.1.11.2.3.7.11.17.7.1.1.0.5,HP-SYSTEM-MIB::hpDistributionEvent,,,,,,A hpDistributionEvent signifies that the SNMP  distribution event of hpDistributionType.
.1.3.6.1.4.1.11.2.3.7.11.17.7.1.1.0.6,HP-SYSTEM-MIB::hpAdminAuthFailure,,,,,,A hpAdminAuthFailure signifies that the SNMP  has failed to authenticate to the device via the administrative interface.
.1.3.6.1.4.1.11.2.3.7.11.17.7.1.1.1,HP-SYSTEM-MIB::hpProcurveSysMib,,,,,,
.1.3.6.1.4.1.11.2.3.7.11.17.7.1.1.1.1,HP-SYSTEM-MIB::hpProductDescription,OCTET,read-only,,current,,Textual Description of the HW product
.1.3.6.1.4.1.11.2.3.7.11.17.7.1.1.1.2,HP-SYSTEM-MIB::hpProductHWVersion,OCTET,read-only,,current,,HW version of the product
.1.3.6.1.4.1.11.2.3.7.11.17.7.1.1.1.3,HP-SYSTEM-MIB::hpProductSWVersion,OCTET,read-only,,current,,SW version of the product
.1.3.6.1.4.1.11.2.3.7.11.17.7.1.1.1.4,HP-SYSTEM-MIB::hpProductSerialNumber,OCTET,read-only,,current,,Serial Number of the product
.1.3.6.1.4.1.11.2.3.7.11.17.7.1.1.1.5,HP-SYSTEM-MIB::hpProductLastChange,OCTET,read-only,,current,,Date and time of last configuration change
.1.3.6.1.4.1.11.2.3.7.11.17.7.1.1.1.6,HP-SYSTEM-MIB::hpCpuTemperature,OCTET,read-only,,current,,Current temperature in degrees centigrade 
.1.3.6.1.4.1.11.2.3.7.11.17.7.1.1.1.7,HP-SYSTEM-MIB::hpPowerSupplyTemperature,OCTET,read-only,,deprecated,,Current temperature in degrees centigrade 
.1.3.6.1.4.1.11.2.3.7.11.17.7.1.1.1.8,HP-SYSTEM-MIB::hpChassisTemperature,OCTET,read-only,,current,,Current temperature in degrees centigrade  of the mother board. Note: this is not the ambient temperature of the box.
.1.3.6.1.4.1.11.2.3.7.11.17.7.1.1.1.9,HP-SYSTEM-MIB::hpFanStatusTable,,not-accessible,,current,,Table of operational status of all internal 
.1.3.6.1.4.1.11.2.3.7.11.17.7.1.1.1.9.1,HP-SYSTEM-MIB::hpFanStatusEntry,,not-accessible,hpFanNumber,current,,Entry in table of all internal cooling fans.
.1.3.6.1.4.1.11.2.3.7.11.17.7.1.1.1.9.1.1,HP-SYSTEM-MIB::hpFanNumber,INTEGER,read-only,,current,cpu(1):power(2),Identifier of cooling fan, numbered to represent what 
.1.3.6.1.4.1.11.2.3.7.11.17.7.1.1.1.9.1.2,HP-SYSTEM-MIB::hpFanOperational,INTEGER,read-only,,current,true(1):false(2),Operational status of a cooling fan.
.1.3.6.1.4.1.11.2.3.7.11.17.7.1.1.1.9.1.3,HP-SYSTEM-MIB::hpFanSpeed,Integer32,read-only,,current,,Speed of the fan in RPM.
.1.3.6.1.4.1.11.2.3.7.11.17.7.1.1.2,HP-SYSTEM-MIB::hpSystemMIBObjects,,,,,,
.1.3.6.1.4.1.11.2.3.7.11.17.7.1.1.2.1,HP-SYSTEM-MIB::hpConfig,,,,,,
.1.3.6.1.4.1.11.2.3.7.11.17.7.1.1.2.1.2,HP-SYSTEM-MIB::hpName,OCTET,read-write,,current,,A textual string containing information about the device. For instance, this string reflects the setting of the HP J8162A XL Access Controller Module Name available on the Administrative  Web based User Interface. If no HP J8162A XL Access Controller Module name is entered, this object contains a zero-length string.
.1.3.6.1.4.1.11.2.3.7.11.17.7.1.1.2.1.3,HP-SYSTEM-MIB::hpSystemID,OCTET,read-only,,current,,The unique identifier for this device, as used by this system, or a master controlling system. For instance, an HP J8162A XL Access Controller Module would report the systemID used by the
.1.3.6.1.4.1.11.2.3.7.11.17.7.1.1.2.1.4,HP-SYSTEM-MIB::hpState,INTEGER,read-only,,current,unknown(1):up(2):down(3):primary(4):secondary(5),The current state of the device. A HP ProCurve Networking Business  unknown(1) - system Configuration status unknown up(2) - a standalone system is operational. down(3) - a system is not operational. primary(4) - system is running as the primary in a Failover peer configuration. secondary(5) - system is running as the backup in a Failover peer configuration.
.1.3.6.1.4.1.11.2.3.7.11.17.7.1.1.2.1.5,HP-SYSTEM-MIB::hpDistributionType,INTEGER,read-only,,current,unknown(1):rightsPush(2),The most recent distribution event type on a device.  This object will change dynamically based on the most recently triggered distribution event. unknown(1) - the distribution event type none(2) - no distribution event has occurred rightsPush(3) - the central Access Control Server 740wl 
.1.3.6.1.4.1.11.2.3.7.11.17.7.1.1.2.1.6,HP-SYSTEM-MIB::hpDistributionStatus,INTEGER,read-only,,current,unknown(1):succeeded(2):failed(3),The most recent distribution event on a device.  This object will change dynamically based on the most recently triggered distribution event. unknown(1) - the distribution event status unknown succeeded(2) - no distribution event has succeeded failed(3) - the distribution event failed for some reason.
.1.3.6.1.4.1.11.2.3.7.11.17.7.1.1.2.1.7,HP-SYSTEM-MIB::hpIpAddress,IpAddress,read-write,,current,,The administratively assigned IP address associated with the  device. This can be assigned statically on the device Console port, or configured via DHCP.
.1.3.6.1.4.1.11.2.3.7.11.17.7.1.1.2.1.8,HP-SYSTEM-MIB::hpPeerIpAddress,IpAddress,read-write,,current,,The administratively assigned IP address associated with a  redundant peer device, configured to work with this device  for failover purposes. This can be assigned statically on the device Console port, or configured via DHCP. If the device  does not support Failover configuration, or none has been  configured, this object will report 0.0.0.0
.1.3.6.1.4.1.11.2.3.7.11.17.7.1.1.2.1.9,HP-SYSTEM-MIB::hpTechSupportEnabled,INTEGER,read-write,,current,true(1):false(2),This object contains the current setting for the technical support access to the device. A value of true(1)  indicates the Technical Support Access has been enabled. A value of false(2) indicates this access has been disabled. Note  this object should only report true(2) if HP ProCurve Networking 
.1.3.6.1.4.1.11.2.3.7.11.17.7.1.1.2.1.10,HP-SYSTEM-MIB::hpFailedAdminIpAddress,IpAddress,read-only,,current,,The IP address associated with the last failed had failed authentication, this object will report 0.0.0.0
.1.3.6.1.4.1.11.2.3.7.11.17.7.1.1.2.2,HP-SYSTEM-MIB::hpStatus,,,,,,
.1.3.6.1.4.1.11.2.3.7.11.17.7.1.1.2.2.1,HP-SYSTEM-MIB::hpNumAccessControllers,Unsigned32,read-only,,current,,The number of HP J8162A XL Access Controller Modules known to this system. 
.1.3.6.1.4.1.11.2.3.7.11.17.7.1.1.2.2.2,HP-SYSTEM-MIB::hpNumClients,Gauge32,read-only,,current,,The total number of active authenticated or unauthenticated  clients known to this system. If this device is an  HP J8162A XL Access Controller Module, then this object reports  the aggregated number of clients across all ports. If this device is a Access Control Server 740wl, it reports all Clients aggregated across all HP J8162A XL Access Controller Modules known to this system.
.1.3.6.1.4.1.11.2.3.7.11.17.7.1.1.2.3,HP-SYSTEM-MIB::hpNotificationsConfig,,,,,,
.1.3.6.1.4.1.11.2.3.7.11.17.7.1.1.2.3.1,HP-SYSTEM-MIB::hpFailoverNotificationEnabled,INTEGER,read-write,,current,true(1):false(2),This object controls whether a hpFailover notification will  be sent in the event of a failover occurrence between a primary for all systems.
.1.3.6.1.4.1.11.2.3.7.11.17.7.1.1.2.3.2,HP-SYSTEM-MIB::hpDistributionNotificationEnabled,INTEGER,read-write,,current,true(1):false(2),This object controls whether a hpDistribution notification will  be sent in the event of a distribution event between a central for all systems.
.1.3.6.1.4.1.11.2.3.7.11.17.7.1.1.2.3.3,HP-SYSTEM-MIB::hpAdminAuthFailureNotificationEnabled,INTEGER,read-write,,current,true(1):false(2),This object controls whether a hpAdminAuthFailure 
.1.3.6.1.4.1.11.2.3.7.11.17.7.1.1.3,HP-SYSTEM-MIB::hpSystemMIBConformance,,,,,,
.1.3.6.1.4.1.11.2.3.7.11.17.7.1.1.3.1,HP-SYSTEM-MIB::hpCompliances,,,,,,
.1.3.6.1.4.1.11.2.3.7.11.17.7.1.1.3.1.1,HP-SYSTEM-MIB::hpSystemMIBCompliance1,,,,,,The compliance statement for entities which implement the HP-SYSTEM-MIB.
.1.3.6.1.4.1.11.2.3.7.11.17.7.1.1.3.2,HP-SYSTEM-MIB::hpGroups,,,,,,
.1.3.6.1.4.1.11.2.3.7.11.17.7.1.1.3.2.1,HP-SYSTEM-MIB::hpSystemGroup,,,,,,A collection of objects providing system information  applicable to all devices.
.1.3.6.1.4.1.11.2.3.7.11.17.7.1.1.3.2.2,HP-SYSTEM-MIB::hpEnvGroup,,,,,,A collection of objects providing environmental information  applicable to all devices.
.1.3.6.1.4.1.11.2.3.7.11.17.7.1.1.3.2.3,HP-SYSTEM-MIB::hpConfigGroup,,,,,,A collection of objects providing configuration information  applicable to all devices.
.1.3.6.1.4.1.11.2.3.7.11.17.7.1.1.3.2.4,HP-SYSTEM-MIB::hpStatusGroup,,,,,,A collection of objects providing statistics applicable to all HP J8162A XL Access Controller Module like devices.
.1.3.6.1.4.1.11.2.3.7.11.17.7.1.1.3.2.5,HP-SYSTEM-MIB::hpNotificationsConfigGroup,,,,,,A collection of objects providing notification configuration  information applicable to all devices.
.1.3.6.1.4.1.11.2.3.7.11.17.7.1.1.3.2.6,HP-SYSTEM-MIB::hpNotificationsGroup,,,,,,notifications for primary failover, and authorization failures, applicable to all devices.
.1.3.6.1.4.1.11.2.3.7.11.17.7.1.2,HP-IF-EXT-MIB::hpIfExtMIB,,,,,,Extensions to IF-MIB for HP Procurve product line.
.1.3.6.1.4.1.11.2.3.7.11.17.7.1.2.1,HP-IF-EXT-MIB::hpifMIBObjects,,,,,,
.1.3.6.1.4.1.11.2.3.7.11.17.7.1.2.1.1,HP-IF-EXT-MIB::hpifStats,,,,,,
.1.3.6.1.4.1.11.2.3.7.11.17.7.1.2.1.1.1,HP-IF-EXT-MIB::hpifStatsTable,,not-accessible,,current,,Per interface aggregated statistics for each port on this device. This table relates primarily to HP J8162A XL Access Controller Module and similar devices.
.1.3.6.1.4.1.11.2.3.7.11.17.7.1.2.1.1.1.1,HP-IF-EXT-MIB::hpifStatsEntry,,not-accessible,,current,,An entry containing management statistics applicable to a particular interface on an HP J8162A XL Access Controller Module or similar
.1.3.6.1.4.1.11.2.3.7.11.17.7.1.2.1.1.1.1.1,HP-IF-EXT-MIB::hpifStatsSlot,Unsigned32,read-only,,current,,This object contains the slot designation for this interface on the associated HP J8162A XL Access Controller Module or similar device.
.1.3.6.1.4.1.11.2.3.7.11.17.7.1.2.1.1.1.1.2,HP-IF-EXT-MIB::hpifStatsPort,Unsigned32,read-only,,current,,This object contains the port designation for this interface in the slot reported by hpifStatsSlot on the associated  HP J8162A XL Access Controller Module or similar device.
.1.3.6.1.4.1.11.2.3.7.11.17.7.1.2.1.1.1.1.3,HP-IF-EXT-MIB::hpifStatsNumClients,Gauge32,read-only,,current,,This object contains the number of active clients associated with this interface on this HP J8162A XL Access Controller Module or similar
.1.3.6.1.4.1.11.2.3.7.11.17.7.1.2.1.1.1.1.4,HP-IF-EXT-MIB::hpifStatsExtRoamsTo,Counter32,read-only,,current,,The number of clients which have roamed to this interface  from another HP J8162A XL Access Controller Module since the last reboot of
.1.3.6.1.4.1.11.2.3.7.11.17.7.1.2.1.1.1.1.5,HP-IF-EXT-MIB::hpifStatsExtRoamsFrom,Counter32,read-only,,current,,The number of clients which have roamed away from  this interface to another external HP J8162A XL Access Controller Module
.1.3.6.1.4.1.11.2.3.7.11.17.7.1.2.1.1.1.1.6,HP-IF-EXT-MIB::hpifStatsIntRoamsTo,Counter32,read-only,,current,,The number of clients which have roamed to this interface  from another interface on this same HP J8162A XL Access Controller Module
.1.3.6.1.4.1.11.2.3.7.11.17.7.1.2.1.1.1.1.7,HP-IF-EXT-MIB::hpifStatsIntRoamsFrom,Counter32,read-only,,current,,The number of clients which have roamed away from  this interface to another interface on this same  HP J8162A XL Access Controller Module since the last reboot of the  HP J8162A XL Access Controller Module or similar device.
.1.3.6.1.4.1.11.2.3.7.11.17.7.1.2.1.1.1.1.8,HP-IF-EXT-MIB::hpifStatsNumSessions,Gauge32,read-only,,current,,The number of active sessions aggregated over all clients associated with this interface on this HP J8162A XL Access Controller Module
.1.3.6.1.4.1.11.2.3.7.11.17.7.1.2.1.3,HP-IF-EXT-MIB::hpifNotificationConfig,,,,,,
.1.3.6.1.4.1.11.2.3.7.11.17.7.1.2.2,HP-IF-EXT-MIB::hpifExtMIBNotificationsPrefix,,,,,,
.1.3.6.1.4.1.11.2.3.7.11.17.7.1.2.2.0,HP-IF-EXT-MIB::hpifExtMIBNotifications,,,,,,
.1.3.6.1.4.1.11.2.3.7.11.17.7.1.2.3,HP-IF-EXT-MIB::hpIfExtMIBConformance,,,,,,
.1.3.6.1.4.1.11.2.3.7.11.17.7.1.2.3.1,HP-IF-EXT-MIB::hpifCompliances,,,,,,
.1.3.6.1.4.1.11.2.3.7.11.17.7.1.2.3.1.1,HP-IF-EXT-MIB::hpifExtMIBCompliance1,,,,,,The compliance statement for entities which implement the HP-IF-EXT-MIB.
.1.3.6.1.4.1.11.2.3.7.11.17.7.1.2.3.2,HP-IF-EXT-MIB::hpifGroups,,,,,,
.1.3.6.1.4.1.11.2.3.7.11.17.7.1.2.3.2.1,HP-IF-EXT-MIB::hpifStatsGroup,,,,,,A collection of objects providing statistics applicable to all HP J8162A XL Access Controller Module like devices.
.1.3.6.1.4.1.11.2.3.7.11.17.7.1.5,HP-MEMPROC-MIB::hpMemprocMIB,,,,,,Memory and Process information for HP Procurve product line.
.1.3.6.1.4.1.11.2.3.7.11.17.7.1.5.1,HP-MEMPROC-MIB::hpMemprocMIBObjects,,,,,,
.1.3.6.1.4.1.11.2.3.7.11.17.7.1.5.1.1,HP-MEMPROC-MIB::hpmpCPU,,,,,,
.1.3.6.1.4.1.11.2.3.7.11.17.7.1.5.1.1.1,HP-MEMPROC-MIB::hpmpCPUTable,,not-accessible,,current,,A table of per CPU load averages and utilization statistics.
.1.3.6.1.4.1.11.2.3.7.11.17.7.1.5.1.1.1.1,HP-MEMPROC-MIB::hpmpCPUEntry,,not-accessible,hpmpCPUIndex,current,,Information relating to CPU load and utilization.
.1.3.6.1.4.1.11.2.3.7.11.17.7.1.5.1.1.1.1.1,HP-MEMPROC-MIB::hpmpCPUIndex,Unsigned32,not-accessible,,current,,An index that uniquely represents a CPU on this device. This  index is assigned arbitrarily by the engine and is not  saved over reboots.
.1.3.6.1.4.1.11.2.3.7.11.17.7.1.5.1.1.1.1.2,HP-MEMPROC-MIB::hpmpCPULoad1min,Integer32,read-only,,current,,The number of processes in the CPU run queue, averaged  over the past 1 minute. This is computed by taking the  floating point load average value and multiplying by 100, then converting the value to an integer.
.1.3.6.1.4.1.11.2.3.7.11.17.7.1.5.1.1.1.1.3,HP-MEMPROC-MIB::hpmpCPULoad5min,Integer32,read-only,,current,,The number of processes in the CPU run queue, averaged  over the past 5 minutes. This is computed by taking the  floating point load average value and multiplying by 100, then converting the value to an integer.
.1.3.6.1.4.1.11.2.3.7.11.17.7.1.5.1.1.1.1.4,HP-MEMPROC-MIB::hpmpCPULoad15min,Integer32,read-only,,current,,The number of processes in the CPU run queue, averaged  over the past 15 minutes. This is computed by taking the  floating point load average value and multiplying by 100, then converting the value to an integer.
.1.3.6.1.4.1.11.2.3.7.11.17.7.1.5.1.1.1.1.5,HP-MEMPROC-MIB::hpmpCPUPctBusy,Gauge32,read-only,,current,,This object reports the percentage time the CPU was actively engaged during the last interval.
.1.3.6.1.4.1.11.2.3.7.11.17.7.1.5.1.2,HP-MEMPROC-MIB::hpmpMemory,,,,,,
.1.3.6.1.4.1.11.2.3.7.11.17.7.1.5.1.2.1,HP-MEMPROC-MIB::hpmpMemTable,,not-accessible,,current,,A table of memory utilization per unique memory pool.
.1.3.6.1.4.1.11.2.3.7.11.17.7.1.5.1.2.1.1,HP-MEMPROC-MIB::hpmpMemEntry,,not-accessible,hpmpMemIndex,current,,Information relating to memory size and utilization.
.1.3.6.1.4.1.11.2.3.7.11.17.7.1.5.1.2.1.1.1,HP-MEMPROC-MIB::hpmpMemIndex,Unsigned32,not-accessible,,current,,An index that uniquely represents a Memory pool on this device. This  index is assigned arbitrarily by the engine and is not  saved over reboots.
.1.3.6.1.4.1.11.2.3.7.11.17.7.1.5.1.2.1.1.2,HP-MEMPROC-MIB::hpmpMemDescr,OCTET,read-only,,current,,This object describes the memory pool reported by hpmpMemIndex.
.1.3.6.1.4.1.11.2.3.7.11.17.7.1.5.1.2.1.1.3,HP-MEMPROC-MIB::hpmpMemInUse,Unsigned32,read-only,,current,,This object reports the amount of physical memory in use by this memory pool.
.1.3.6.1.4.1.11.2.3.7.11.17.7.1.5.1.2.1.1.4,HP-MEMPROC-MIB::hpmpMemTotal,Unsigned32,read-only,,current,,This object reports the total amount of physical memory  available to this memory pool.
.1.3.6.1.4.1.11.2.3.7.11.17.7.1.5.1.2.1.1.5,HP-MEMPROC-MIB::hpmpMemPctInUse,Gauge32,read-only,,current,,This object reports the percent of physical memory in use by this memory pool.
.1.3.6.1.4.1.11.2.3.7.11.17.7.1.5.2,HP-MEMPROC-MIB::hpMemprocNotificationsPrefix,,,,,,
.1.3.6.1.4.1.11.2.3.7.11.17.7.1.5.2.0,HP-MEMPROC-MIB::hpMemprocNotifications,,,,,,
.1.3.6.1.4.1.11.2.3.7.11.17.7.1.5.3,HP-MEMPROC-MIB::hpMemprocMIBConformance,,,,,,
.1.3.6.1.4.1.11.2.3.7.11.17.7.1.5.3.1,HP-MEMPROC-MIB::hpmpCompliances,,,,,,
.1.3.6.1.4.1.11.2.3.7.11.17.7.1.5.3.1.1,HP-MEMPROC-MIB::hpMemprocMIBCompliance1,,,,,,The compliance statement for entities which implement the HP-MEMPROC-MIB.
.1.3.6.1.4.1.11.2.3.7.11.17.7.1.5.3.2,HP-MEMPROC-MIB::hpmpGroups,,,,,,
.1.3.6.1.4.1.11.2.3.7.11.17.7.1.5.3.2.1,HP-MEMPROC-MIB::hpmpCPUGroup,,,,,,A collection of objects providing CPU utilization and load  information applicable to all devices.
.1.3.6.1.4.1.11.2.3.7.11.17.7.1.5.3.2.2,HP-MEMPROC-MIB::hpmpMemoryGroup,,,,,,A collection of objects providing memory usage information applicable to all devices.
.1.3.6.1.4.1.11.2.3.7.11.17.8,HP-ICF-OID::hpSwitchPortModuleJ4820B,,,,,,The authoritative identifier for the HP J4820B 24 Port 10/100Base-TX Module.
.1.3.6.1.4.1.11.2.3.7.11.17.9,HP-ICF-OID::hpSwitchPortModuleJ4821B,,,,,,The authoritative identifier for the HP J4821B 4 Port 100/1000Base-TX Module.
.1.3.6.1.4.1.11.2.3.7.11.17.10,HP-ICF-OID::hpSwitchPortModuleJ4878B,,,,,,The authoritative identifier for the HP J4878B 4x MiniGBIC Module.
.1.3.6.1.4.1.11.2.3.7.11.17.11,HP-ICF-OID::hpSwitchModuleJ9001A,,,,,,The authoritative identifier for the HP J9001A Wireless Services xl Module.
.1.3.6.1.4.1.11.2.3.7.11.17.12,HP-ICF-OID::hpSwitchModuleJ9003A,,,,,,The authoritative identifier for the HP J9003A Redundant Wireless Services xl Module.
.1.3.6.1.4.1.11.2.3.7.11.17.13,HP-ICF-OID::hpSwitchModuleJ8988A,,,,,,The authoritative identifier for the HP J8988A 10-GbE X2 xl module.
.1.3.6.1.4.1.11.2.3.7.11.18,HP-ICF-OID::hpSwitchJ4812A,,,,,,The authoritative identifier for the J4812A HP 2512 Switch.
.1.3.6.1.4.1.11.2.3.7.11.18.1,HP-ICF-OID::hpSwitchModuleJ4812A,,,,,,The authoritative identifier for the HP J4812A 12-port 10/100Base-TX + 2 Gig module
.1.3.6.1.4.1.11.2.3.7.11.19,HP-ICF-OID::hpSwitchJ4813A,,,,,,The authoritative identifier for the J4813A HP 2524 Switch.
.1.3.6.1.4.1.11.2.3.7.11.19.1,HP-ICF-OID::hpSwitchModuleJ4813A,,,,,,The authoritative identifier for the HP J4813A 24-port 10/100Base-TX + 2 Gig module
.1.3.6.1.4.1.11.2.3.7.11.20,HP-ICF-OID::hpSwitchJ4850A,,,,,,The authoritative identifier for the J4850A HP E5304XL Switch.
.1.3.6.1.4.1.11.2.3.7.11.21,HP-ICF-OID::hpSwitchJ4815A,,,,,,The authoritative identifier for the J4815A HP E3324XL Switch.
.1.3.6.1.4.1.11.2.3.7.11.22,HP-ICF-OID::hpSwitchJ4851A,,,,,,The authoritative identifier for the J4851A HP E3124 Switch.
.1.3.6.1.4.1.11.2.3.7.11.23,HP-ICF-OID::hpSwitchJ4865A,,,,,,The authoritative identifier for the J4865A HP 4108GL Switch.
.1.3.6.1.4.1.11.2.3.7.11.23.1,HP-ICF-OID::hpSwitchModuleJ4862A,,,,,,The authoritative identifier for the HP J4862A 24-port 10/100Base-TX
.1.3.6.1.4.1.11.2.3.7.11.23.2,HP-ICF-OID::hpSwitchModuleJ4863A,,,,,,The authoritative identifier for the HP J4863A 6-port 100/1000Base-TX
.1.3.6.1.4.1.11.2.3.7.11.23.3,HP-ICF-OID::hpSwitchModuleJ4864A,,,,,,The authoritative identifier for the HP J4864A 3-port tranceiver module
.1.3.6.1.4.1.11.2.3.7.11.23.4,HP-ICF-OID::hpSwitchModuleJ4862B,,,,,,The authoritative identifier for the HP J4862B 24-port 10/100Base-TX
.1.3.6.1.4.1.11.2.3.7.11.23.5,HP-ICF-OID::hpSwitchModuleJ4893A,,,,,,The authoritative identifier for the HP J4893A 6-port Mini-GBIC module
.1.3.6.1.4.1.11.2.3.7.11.23.6,HP-ICF-OID::hpSwitchModuleJ4892A,,,,,,The authoritative identifier for the HP J4892A 12-port 100-FX MTRJ
.1.3.6.1.4.1.11.2.3.7.11.23.7,HP-ICF-OID::hpSwitchModuleJ4908A,,,,,,The authoritative identifier for the HP J489XA 20-port 10/100/1000Base-TX + 2 Mini-GBIC
.1.3.6.1.4.1.11.2.3.7.11.24,HP-ICF-OID::hpSwitchA6713A,,,,,,The authoritative identifier for the HP A6713A Network Blade.
.1.3.6.1.4.1.11.2.3.7.11.24.11,HP-ICF-OID::hpSwitchModuleA6713A,,,,,,The authoritative identifier for the HP A6713A 16+8-port 10/100T + Gig TX module.
.1.3.6.1.4.1.11.2.3.7.11.25,HP-ICF-OID::hpSwitchA6716A,,,,,,The authoritative identifier for the HP A6716A Network Blade.
.1.3.6.1.4.1.11.2.3.7.11.25.12,HP-ICF-OID::hpSwitchModuleA6716A,,,,,,The authoritative identifier for the HP A6716A 16+8-port 10/100T + Gig SX module.
.1.3.6.1.4.1.11.2.3.7.11.26,HP-ICF-OID::hpSwitchA6717A,,,,,,The authoritative identifier for the HP A6717A Network Blade.
.1.3.6.1.4.1.11.2.3.7.11.26.13,HP-ICF-OID::hpSwitchModuleA6717A,,,,,,The authoritative identifier for the HP A6717A 16+8-port 10/100T + Gig LX module.
.1.3.6.1.4.1.11.2.3.7.11.27,HP-ICF-OID::hpSwitchJ4887A,,,,,,The authoritative identifier for the J4887A HP 4104GL Switch.
.1.3.6.1.4.1.11.2.3.7.11.28,HP-ICF-OID::hpSwitchJ4874A,,,,,,The authoritative identifier for the J4874A HP 9315 Switch.
.1.3.6.1.4.1.11.2.3.7.11.29,HP-ICF-OID::hpSwitchJ4899A,,,,,,The authoritative identifier for the J4899A HP 2650 Switch.
.1.3.6.1.4.1.11.2.3.7.11.29.1,HP-ICF-OID::hpSwitchModuleJ4899A,,,,,,The authoritative identifier for the J4899A HP 2650 48-port 10/100-T + 2-port Gig module.
.1.3.6.1.4.1.11.2.3.7.11.30,HP-ICF-OID::hpSwitchJ4902A,,,,,,The authoritative identifier for the J4902A HP 6108 Switch.
.1.3.6.1.4.1.11.2.3.7.11.30.1,HP-ICF-OID::hpSwitchModuleJ4902A,,,,,,The authoritative identifier for the J4902A HP 6108 6-port 10/100/1000-TX + 2-port Gig module.
.1.3.6.1.4.1.11.2.3.7.11.31,HP-ICF-OID::hpSwitchJ4903A,,,,,,The authoritative identifier for the J4903A HP 2824 Switch.
.1.3.6.1.4.1.11.2.3.7.11.31.1,HP-ICF-OID::hpSwitchModuleJ4903A,,,,,,The authoritative identifier for the HP J4903A 24-port 10/100/1000Base-TX
.1.3.6.1.4.1.11.2.3.7.11.31.2,HP-ICF-OID::hpSwitchModuleJ8434A,,,,,,The authoritative identifier for the HP J8434A 2-port 10G CX4
.1.3.6.1.4.1.11.2.3.7.11.31.3,HP-ICF-OID::hpSwitchModuleJ8435A,,,,,,The authoritative identifier for the HP J8435A 2-port 10G CL
.1.3.6.1.4.1.11.2.3.7.11.32,HP-ICF-OID::hpSwitchJ4904A,,,,,,The authoritative identifier for the J4904A HP 2848 Switch.
.1.3.6.1.4.1.11.2.3.7.11.32.1,HP-ICF-OID::hpSwitchModuleJ4904A,,,,,,The authoritative identifier for the HP J4904A 48-port 10/100/1000Base-TX
.1.3.6.1.4.1.11.2.3.7.11.33,HP-SWITCH-PL-MIB::hpSwitchProliant,,,,,,
.1.3.6.1.4.1.11.2.3.7.11.33.1,HP-SWITCH-PL-MIB::hpSwitchModuleBladetype2,,,,,,
.1.3.6.1.4.1.11.2.3.7.11.33.1.1,HP-SWITCH-PL-MIB::hpSwitchBladeType2-Products,,,,,,
.1.3.6.1.4.1.11.2.3.7.11.33.1.2,HP-SWITCH-PL-MIB::hpSwitchBladeType2-Mgmt,,,,,,
.1.3.6.1.4.1.11.2.3.7.11.33.4,HP-SWITCH-PL-MIB::hpSwitchModuleBladetype4,,,,,,
.1.3.6.1.4.1.11.2.3.7.11.33.4.1,HP-SWITCH-PL-MIB::hpSwitchBladeType4-Products,,,,,,
.1.3.6.1.4.1.11.2.3.7.11.33.4.1.1,BLADETYPE4-NETWORK-MIB::hpProLiant-GbE2c-InterconnectSwitch,,,,,,
.1.3.6.1.4.1.11.2.3.7.11.33.4.2,HP-SWITCH-PL-MIB::hpSwitchBladeType4-Mgmt,,,,,,
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.1,BLADETYPE4-NETWORK-MIB::agent,,,,,,
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.1.1,BLADETYPE4-NETWORK-MIB::agentConfig,,,,,,
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.1.1.1,BLADETYPE4-NETWORK-MIB::agSystem,,,,,,
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.1.1.1.2,BLADETYPE4-NETWORK-MIB::agApplyConfiguration,INTEGER,read-write,,current,other(1):apply(2),This is an action object to apply the changes made to configuration  of the switch. By setting the value to apply(2), all the changes  made since the last apply are written to the new_config block. other(1) is returned when this object ie read. 
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.1.1.1.3,BLADETYPE4-NETWORK-MIB::agSavePending,INTEGER,read-only,,current,saveNeeded(1):noSaveNeeded(2),This object, when read, gives the user information whether an save action is needed and that the configuration has been applied but not saved to the flash.
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.1.1.1.4,BLADETYPE4-NETWORK-MIB::agSaveConfiguration,INTEGER,read-write,,current,ok(1):saveActive(2):notSaveActive(3),This is an action object to write current configuration to  nonvolatile storage. When issued with the saveActive, the active configuration in flash is saved to backup in flash and then the new configuration is saved to the active configuration in flash. When issued with notSaveActive, the active configuration is NOT saved to the flash and the active configuration is overwritten with the new configuration. ok(1) is returned always when read.
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.1.1.1.5,BLADETYPE4-NETWORK-MIB::agRevert,INTEGER,read-write,,current,other(1):revert(2),This is an action object to revert the unapplied changes  made to the switch. By setting the value to revert(2),  all the unapplied changes will be reverted. This action  will copy the current_config to the new_config block. other(1) is returned when this object is read. 
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.1.1.1.6,BLADETYPE4-NETWORK-MIB::agRevertApply,INTEGER,read-write,,current,other(1):revertApply(2),This is an action object to revert the unsaved changes  made to the switch. By setting the value to revertApply(2),  all the unsaved as well as unapplied changes will be  reverted. other(1) is returned when this object is read. 
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.1.1.1.7,BLADETYPE4-NETWORK-MIB::agReset,INTEGER,read-write,,current,other(1):coldReset(2):warmReset(3),This is an action object to reboot the switch. other(1) is returned always when read. The following values are writable: coldReset(2)... warmReset(3)...
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.1.1.1.8,BLADETYPE4-NETWORK-MIB::agConfigForNxtReset,INTEGER,read-write,,current,active(2):backup(3):default(4),The configuration information to be loaded from at next reset. The following values are writable: active(2)...active configuration block backup(3)...backup configuration block default(4)..default configuration block
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.1.1.1.9,BLADETYPE4-NETWORK-MIB::agImageForNxtReset,INTEGER,read-write,,current,image1(2):image2(3),The software image to be booted from at next reset. The following values are writable: image1(2)...image 1 image2(3)...image 2
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.1.1.1.10,BLADETYPE4-NETWORK-MIB::agSoftwareVersion,OCTET,read-only,,current,,The version of the software image that is currently running on the  system in the form of 'major.minor.maintenance.bugfix'. A zero  length string is returned if version is not available.
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.1.1.1.11,BLADETYPE4-NETWORK-MIB::agBootVer,OCTET,read-only,,current,,The version of the boot code in the form of 'major.minor.bugfix'. A zero length string is returned if version is not available.
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.1.1.1.12,BLADETYPE4-NETWORK-MIB::agImage1Ver,OCTET,read-only,,current,,The version of the software image stored in image 1 storage in the  form of 'major.minor.bugfix'. A zero length string is returned if  version is not available or there is no valid software image.
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.1.1.1.13,BLADETYPE4-NETWORK-MIB::agImage2Ver,OCTET,read-only,,current,,The version of the software image stored in image 2 storage in the  form of 'major.minor.bugfix'. A zero length string is returned if  version is not available or there is no valid software image.
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.1.1.1.14,BLADETYPE4-NETWORK-MIB::agRtcDate,OCTET,read-write,,current,,The date on the real time clock in the form of 'mm/dd/yy'.  A zero length string is returned if date is not available.
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.1.1.1.15,BLADETYPE4-NETWORK-MIB::agRtcTime,OCTET,read-write,,current,,The time on the real time clock in the form of 'hh:mm:ss'.  A zero length string is returned if time is not available.
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.1.1.1.16,BLADETYPE4-NETWORK-MIB::agLastSetErrorReason,OCTET,read-only,,current,,The error reason of the last SET failure.
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.1.1.1.17,BLADETYPE4-NETWORK-MIB::agCurCfgHttpServerPort,INTEGER,read-only,,current,,The TCP port number that the HTTP server is listening to  in the current_configuration block.
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.1.1.1.18,BLADETYPE4-NETWORK-MIB::agNewCfgHttpServerPort,INTEGER,read-write,,current,,The TCP port number that the HTTP server is listening to  in the new_configuration block.
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.1.1.1.19,BLADETYPE4-NETWORK-MIB::agCurCfgLoginBanner,OCTET,read-only,,current,,The user defined login banner.
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.1.1.1.20,BLADETYPE4-NETWORK-MIB::agNewCfgLoginBanner,OCTET,read-write,,current,,The user defined login banner.
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.1.1.1.23,BLADETYPE4-NETWORK-MIB::agCurCfgConsole,INTEGER,read-only,,current,enabled(1):disabled(2),Enable or disable console output of syslog messages.
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.1.1.1.24,BLADETYPE4-NETWORK-MIB::agNewCfgConsole,INTEGER,read-write,,current,enabled(1):disabled(2),Enable or disable console output of syslog messages.
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.1.1.1.29,BLADETYPE4-NETWORK-MIB::agCurCfgBootp,INTEGER,read-only,,current,enabled(2):disabled(3),Enable or disable the use of BootP, as currently configured in the  current_configuration block.
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.1.1.1.30,BLADETYPE4-NETWORK-MIB::agNewCfgBootp,INTEGER,read-write,,current,enabled(2):disabled(3),Enable or disable the use of BootP, in the new_configuration block.
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.1.1.1.31,BLADETYPE4-NETWORK-MIB::agSlotNumber,INTEGER,read-only,,current,,Identifies the slot in which this switch is installed. If the  agent implementing this MIB is not a blade in a chassis this  value has no meaning.
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.1.1.1.32,BLADETYPE4-NETWORK-MIB::agCurCfgSnmpTimeout,INTEGER,read-only,,current,,Once SNMP operations like agApplyConfig, agDiffState and  agDumpState, which use the state machine are done the resources used by these operations need to be freed by setting the state back to 'idle' so others can issue the commands via SNMP.  agSnmpTimeout indicates the number of minutes before the resources are freed and the state set back to 'idle' if this operation is not  performed by the user.
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.1.1.1.33,BLADETYPE4-NETWORK-MIB::agNewCfgSnmpTimeout,INTEGER,read-write,,current,,Once SNMP operations like agApplyConfig, agDiffState and  agDumpState, which use the state machine are done the resources used by these operations need to be freed by setting the state back to 'idle' so others can issue the commands via SNMP.  agSnmpTimeout indicates the number of minutes before the resources are freed and the state set back to 'idle' if this operation is not  performed by the user.
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.1.1.1.34,BLADETYPE4-NETWORK-MIB::agCurCfgTelnetServerPort,INTEGER,read-only,,current,,The TCP port number that the telnet server listens for telnet  sessions.
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.1.1.1.35,BLADETYPE4-NETWORK-MIB::agNewCfgTelnetServerPort,INTEGER,read-write,,current,,The TCP port number that the telnet server listens for telnet  sessions.
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.1.1.1.36,BLADETYPE4-NETWORK-MIB::agClearFlashDump,INTEGER,read-write,,current,ok(1):clear(2),This is an action object to clear the FLASH dump.  ok(1) is returned when this object is read. 
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.1.1.1.37,BLADETYPE4-NETWORK-MIB::agRackId,OCTET,read-only,,current,,The rack unique identifier.
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.1.1.1.38,BLADETYPE4-NETWORK-MIB::agChassis,OCTET,read-only,,current,,Chassis serial number.
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.1.1.1.39,BLADETYPE4-NETWORK-MIB::agCurCfgTftpServerPort,INTEGER,read-only,,current,,The TCP port number that the TFTP server is listening to  in the current_configuration block.
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.1.1.1.40,BLADETYPE4-NETWORK-MIB::agNewCfgTftpServerPort,INTEGER,read-write,,current,,The TCP port number that the TFTP server is listening to  in the new_configuration block.
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.1.1.1.41,BLADETYPE4-NETWORK-MIB::agCurCfgTrapSrcIf,Integer32,read-only,,current,,The SNMP trap source interface number.
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.1.1.1.42,BLADETYPE4-NETWORK-MIB::agNewCfgTrapSrcIf,Integer32,read-write,,current,,The SNMP trap source interface number.
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.1.1.1.49,BLADETYPE4-NETWORK-MIB::agCurCfgHttpsServerPort,INTEGER,read-only,,current,,The TCP port number that the HTTPS server is listening to  in the current_configuration block.
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.1.1.1.50,BLADETYPE4-NETWORK-MIB::agNewCfgHttpsServerPort,INTEGER,read-write,,current,,The TCP port number that the HTTPS server is listening to  in the new_configuration block.
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.1.1.1.51,BLADETYPE4-NETWORK-MIB::agCurDaylightSavings,INTEGER,read-only,,current,none(0):africa-Algeria(1):africa-Angola(2):africa-Benin(3):africa-Botswana(4):africa-Burkina-Faso(5):africa-Burundi(6):africa-Cameroon(7):africa-Central-African-Rep(8):africa-Chad(9):africa-Congo-WestDemRepCongo(10):africa-Congo-EastDemRepCongo(11):africa-Congo-Rep(12):africa-Cote-dIvoire(13):africa-Djibouti(14):africa-Egypt(15):africa-Equatorial-Guinea(16):africa-Eritrea(17):africa-Ethiopia(18):africa-Gabon(19):africa-Gambia(20):africa-Ghana(21):africa-Guinea(22):africa-Guinea-Bissau(23):africa-Kenya(24):africa-Lesotho(25):africa-Liberia(26):africa-Libya(27):africa-Malawi(28):africa-Mali-SouthWestMali(29):africa-Mali-NorthEastMali(30):africa-Mauritania(31):africa-Morocco(32):africa-Mozambique(33):africa-Namibia(34):africa-Niger(35):africa-Nigeria(36):africa-Rwanda(37):africa-SaoTome-And-Principe(38):africa-Senegal(39):africa-SierraLeone(40):africa-Somalia(41):africa-SouthAfrica(42):africa-Spain-Mainland(43):africa-Spain-CeutaMelilla(44):africa-Spain-CanaryIslands(45):africa-Sudan(46):africa-Swaziland(47):africa-Tanzania(48):africa-Togo(49):africa-Tunisia(50):africa-Uganda(51):africa-Western-Sahara(52):africa-Zambia(53):africa-Zimbabwe(54):americas-Anguilla(55):americas-Antigua-Barbuda(56):americas-Argentina-EArgentina(57):americas-Argentina-MostLocations(58):americas-Argentina-Jujuy(59):americas-Argentina-Catamarca(60):americas-Argentina-Mendoza(61):americas-Aruba(62):americas-Bahamas(63):americas-Barbados(64):americas-Belize(65):americas-Bolivia(66):americas-Brazil-AtlanticIslands(67):americas-Brazil-AmapaEPara(68):americas-Brazil-NEBrazil(69):americas-Brazil-Pernambuco(70):americas-Brazil-Tocantins(71):americas-Brazil-AlagoasSergipe(72):americas-Brazil-SSEBrazil(73):americas-Brazil-MatoGrossoDoSul(74):americas-Brazil-WParaRondonia(75):americas-Brazil-Roraima(76):americas-Brazil-EAmazonas(77):americas-Brazil-WAmazonas(78):americas-Brazil-Acre(79):americas-Canada-NewfoundlandIsland(80):americas-Canada-AtlanTime-NovaScotia(81):americas-Canada-AtlanTime-ELabrador(82):americas-Canada-EastTime-OntarioMostlocation(83):americas-Canada-EastTime-ThunderBay(84):americas-Canada-EastStdTime-PangnirtungNunavut(85):americas-Canada-EastStdTime-EastNunavut(86):americas-Canada-EastStdTime-CenNunavut(87):americas-Canada-CenTime-ManitobaWestOntario(88):americas-Canada-CenTime-RainyRiver(89):americas-Canada-CenTime-WestNunavut(90):americas-Canada-CenStdTime-SaskatchewanMostlocation(91):americas-Canada-CenStdTime-SaskatchewanMidwest(92):americas-Canada-MountTime-AlbertaEastBritishColumbia(93):americas-Canada-MountTime-CentralNorthwestTerritories(94):americas-Canada-MountTime-WestNorthwestTerritories(95):americas-Canada-MountStdTime-EastBritishColumbia(96):americas-Canada-PacificTime-WestBritishColumbia(97):americas-Canada-PacificTime-SouthYukon(98):americas-Canada-PacificTime-NorthYukon(99):americas-CaymanIslands(100):americas-Chile-MostLocation(101):americas-Chile-EasterIsland(102):americas-Colombia(103):americas-CostaRica(104):americas-Cuba(105):americas-Dominica(106):americas-DominicanRepublic(107):americas-Ecuador(108):americas-ElSalvado(109):americas-FrenchGuiana(110):americas-Greenland-MostLocation(111):americas-Greenland-EastCoastNorthScoresbysund(112):americas-Greenland-ScoresbysundIttoqqortoormiit(113):americas-Greenland-ThulePituffik(114):americas-Grenada(115):americas-Guadeloupe(116):americas-Guatemala(117):americas-Guyana(118):americas-Haiti(119):americas-Honduras(120):americas-Jamaica(121):americas-Martinique(122):americas-Mexico-CentTime-Mostlocations(123):americas-Mexico-CentTime-QuintanaRoo(124):americas-Mexico-CentTime-CampecheYucatan(125):americas-Mexico-CentTime-CoahDurangoNLTamaulipas(126):americas-Mexico-MountTime-SBajaNayaritSinaloa(127):americas-Mexico-MountTime-Chihuahua(128):americas-Mexico-MountStdTime-Sonora(129):americas-Mexico-PacificTime(130):americas-Montserrat(131):americas-NetherlandsAntilles(132):americas-Nicaragua(133):americas-Panama(134):americas-Paraguay(135):americas-Peru(136):americas-PuertoRico(137):americas-StKittsAndNevis(138):americas-StLucia(139):americas-StPierreAndMiquelon(140):americas-StVincent(141):americas-Suriname(142):americas-TrinidadAndTobago(143):americas-TurksAndCaicosIs(144):americas-USA-EastTime(145):americas-USA-EastTime-MichiganMostLocation(146):americas-USA-EastTime-KentuckyLouisvilleArea(147):americas-USA-EastTime-KentuckyWayneCounty(148):americas-USA-EastStdTime-IndianaMostLocations(149):americas-USA-EastStdTime-IndianaCrawfordCounty(150):americas-USA-EastStdTime-IndianaStarkeCounty(151):americas-USA-EastStdTime-IndianaSwitzerlandCounty(152):americas-USA-CentTime(153):americas-USA-CentTime-MichiganWisconsinborder(154):americas-USA-CentTime-NorthDakotaOliverCounty(155):americas-USA-MountTime(156):americas-USA-MountTime-SouthIdahoAndEastOregon(157):americas-USA-MountTime-Navajo(158):americas-USA-MountStdTime-Arizona(159):americas-USA-PacificTime(160):americas-USA-AlaskaTime(161):americas-USA-AlaskaTime-AlaskaPanhandle(162):americas-USA-AlaskaTime-AlaskaPanhandleNeck(163):americas-USA-AlaskaTime-WestAlaska(164):americas-USA-AleutianIslands(165):americas-USA-Hawaii(166):americas-Uruguay(167):americas-Venezuela(168):americas-VirginIslands-UK(169):americas-VirginIslands-US(170):antarctica-McMurdoStationRossIsland(171):antarctica-Amundsen-ScottStationSouthPole(172):antarctica-PalmerStationAnversIsland(173):antarctica-MawsonStationHolmeBay(174):antarctica-DavisStationVestfoldHills(175):antarctica-CaseyStationBaileyPeninsula(176):antarctica-VostokStationSMagneticPole(177):antarctica-Dumont-dUrvilleBaseTerreAdelie(178):antarctica-SyowaStationEOngulI(179):arcticOcean-Svalbard(180):arcticOcean-JanMayen(181):asia-Afghanistan(182):asia-Armenia(183):asia-Azerbaijan(184):asia-Bahrain(185):asia-Bangladesh(186):asia-Bhutan(187):asia-Brunei(188):asia-Cambodia(189):asia-China-EastChinaBeijingGuangdongShanghai(190):asia-China-Heilongjiang(191):asia-China-CentralChinaGansuGuizhouSichuanYunnan(192):asia-China-TibetmostofXinjiangUyghur(193):asia-China-SouthwestXinjiangUyghur(194):asia-Cyprus(195):asia-EastTimor(196):asia-Georgia(197):asia-HongKong(198):asia-India(199):asia-Indonesia-JavaAndSumatra(200):asia-Indonesia-WestCentralBorneo(201):asia-Indonesia-EastSouthBorneoBaliWestTimor(202):asia-Indonesia-IrianJayaAndMoluccas(203):asia-Iran(204):asia-Iraq(205):asia-Israel(206):asia-Japan(207):asia-Jordan(208):asia-Kazakhstan-MostLocations(209):asia-Kazakhstan-QyzylordaKyzylorda(210):asia-Kazakhstan-Aqtobe(211):asia-Kazakhstan-AtyrauMangghystau(212):asia-Kazakhstan-WestKazakhstan(213):asia-Korea-North(214):asia-Korea-South(215):asia-Kuwait(216):asia-Kyrgyzstan(217):asia-Laos(218):asia-Lebanon(219):asia-Macau(220):asia-Malaysia-PeninsularMalaysia(221):asia-Malaysia-SabahSarawak(222):asia-Mongolia-MostLocations(223):asia-Mongolia-BayanOlgiyGoviAltaiHovdUvsZavkhan(224):asia-Mongolia-DornodSukhbaatar(225):asia-Myanmar(226):asia-Nepal(227):asia-Oman(228):asia-Pakistan(229):asia-Palestine(230):asia-Philippines(231):asia-Qatar(232):asia-Russia-Moscow-01Kaliningrad(233):asia-Russia-Moscow00WestRussia(234):asia-Russia-Moscow01CaspianSea(235):asia-Russia-Moscow02Urals(236):asia-Russia-Moscow03WestSiberia(237):asia-Russia-Moscow03Novosibirsk(238):asia-Russia-Moscow04YeniseiRiver(239):asia-Russia-Moscow05LakeBaikal(240):asia-Russia-Moscow06LenaRiver(241):asia-Russia-Moscow07AmurRiver(242):asia-Russia-Moscow07SakhalinIsland(243):asia-Russia-Moscow08Magadan(244):asia-Russia-Moscow09Kamchatka(245):asia-Russia-Moscow10BeringSea(246):asia-SaudiArabia(247):asia-Singapore(248):asia-SriLanka(249):asia-Syria(250):asia-Taiwan(251):asia-Tajikistan(252):asia-Thailand(253):asia-Turkmenistan(254):asia-UnitedArabEmirates(255):asia-Uzbekistan-WestUzbekistan(256):asia-Uzbekistan-EastUzbekistan(257):asia-Vietnam(258):asia-Yemen(259):atlanticOcean-Bermuda(260):atlanticOcean-CapeVerde(261):atlanticOcean-FaeroeIslands(262):atlanticOcean-FalklandIslands(263):atlanticOcean-Iceland(264):atlanticOcean-Portugal-Mainland(265):atlanticOcean-Portugal-MadeiraIslands(266):atlanticOcean-Portugal-Azores(267):atlanticOcean-SouthGeorgia-SouthSandwichIslands(268):atlanticOcean-Spain-Mainland(269):atlanticOcean-Spain-CeutaMelilla(270):atlanticOcean-Spain-CanaryIslands(271):atlanticOcean-StHelena(272):atlanticOcean-Svalbard-JanMayen(273):australia-LordHoweIsland(274):australia-Tasmania(275):australia-Victoria(276):australia-NewSouthWales-MostLocations(277):australia-NewSouthWales-Yancowinna(278):australia-Queensland-MostLocations(279):australia-Queensland-HolidayIslands(280):australia-SouthAustralia(281):australia-NorthernTerritory(282):australia-WesternAustralia(283):europe-Albania(284):europe-Andorra(285):europe-Austria(286):europe-Belarus(287):europe-Belgium(288):europe-BosniaHerzegovina(289):europe-Britain-UKGreatBritain(290):europe-Britain-UKNorthernIreland(291):europe-Bulgaria(292):europe-Croatia(293):europe-CzechRepublic(294):europe-Denmark(295):europe-Estonia(296):europe-Finland(297):europe-France(298):europe-Germany(299):europe-Gibraltar(300):europe-Greece(301):europe-Hungary(302):europe-Ireland(303):europe-Italy(304):europe-Latvia(305):europe-Liechtenstein(306):europe-Lithuania(307):europe-Luxembourg(308):europe-Macedonia(309):europe-Malta(310):europe-Moldova(311):europe-Monaco(312):europe-Netherlands(313):europe-Norway(314):europe-Poland(315):europe-Portugal-Mainland(316):europe-Portugal-MadeiraIslands(317):europe-Portugal-Azores(318):europe-Romania(319):europe-Russia-Moscow-01Kaliningrad(320):europe-Russia-Moscow00WestRussia(321):europe-Russia-Moscow01CaspianSea(322):europe-Russia-Moscow02Urals(323):europe-Russia-Moscow03WestSiberia(324):europe-Russia-Moscow03Novosibirsk(325):europe-Russia-Moscow04YeniseiRiver(326):europe-Russia-Moscow05LakeBaikal(327):europe-Russia-Moscow06LenaRiver(328):europe-Russia-Moscow07AmurRiver(329):europe-Russia-Moscow07SakhalinIsland(330):europe-Russia-Moscow08Magadan(331):europe-Russia-Moscow09Kamchatka(332):europe-Russia-Moscow10BeringSea(333):europe-SanMarino(334):europe-Slovakia(335):europe-Slovenia(336):europe-Spain-Mainland(337):europe-Spain-CeutaAndMelilla(338):europe-Spain-CanaryIslands(339):europe-Sweden(340):europe-Switzerland(341):europe-Turkey(342):europe-Ukraine-MostLocations(343):europe-Ukraine-Ruthenia(344):europe-Ukraine-Zaporozhye-ELugansk(345):europe-Ukraine-CentralCrimea(346):europe-VaticanCity(347):europe-Yugoslavia(348):indianOcean-BritishIndianOceanTerritory(349):indianOcean-ChristmasIsland(350):indianOcean-CocosOrKeelingIslands(351):indianOcean-Comoros(352):indianOcean-FrenchSouthernAndAntarcticLands(353):indianOcean-Madagascar(354):indianOcean-Maldives(355):indianOcean-Mauritius(356):indianOcean-Mayotte(357):indianOcean-Reunion(358):indianOcean-Seychelles(359):pacificOcean-Chile-MostLocations(360):pacificOcean-Chile-EasterIslandSalayGomez(361):pacificOcean-CookIslands(362):pacificOcean-Ecuador(363):pacificOcean-Fiji(364):pacificOcean-FrenchPolynesia-SocietyIslands(365):pacificOcean-FrenchPolynesia-MarquesasIslands(366):pacificOcean-FrenchPolynesia-GambierIslands(367):pacificOcean-Guam(368):pacificOcean-Kiribati-GilbertIslands(369):pacificOcean-Kiribati-PhoenixIslands(370):pacificOcean-Kiribati-LineIslands(371):pacificOcean-MarshallIslands-MostLocations(372):pacificOcean-MarshallIslands-Kwajalein(373):pacificOcean-Micronesia-Yap(374):pacificOcean-Micronesia-TrukOrChuuk(375):pacificOcean-Micronesia-PonapeOrPohnpei(376):pacificOcean-Micronesia-Kosrae(377):pacificOcean-Nauru(378):pacificOcean-NewCaledonia(379):pacificOcean-NewZealand-MostLocations(380):pacificOcean-NewZealand-ChathamIslands(381):pacificOcean-Niue(382):pacificOcean-NorfolkIsland(383):pacificOcean-NorthernMarianaIslands(384):pacificOcean-Palau(385):pacificOcean-PapuaNewGuinea(386):pacificOcean-Pitcairn(387):pacificOcean-SamoaAmerican(388):pacificOcean-SamoaWestern(389):pacificOcean-SolomonIslands(390):pacificOcean-Tokelau(391):pacificOcean-Tonga(392):pacificOcean-Tuvalu(393):pacificOceanUSA-EastTime(394):pacificOceanUSA-EastTime-MichiganMostLocations(395):pacificOceanUSA-EastTime-KentuckyLouisvilleArea(396):pacificOceanUSA-EastTime-KentuckyWayneCounty(397):pacificOceanUSA-EastStdTime-IndianaMostLocations(398):pacificOceanUSA-EastStdTime-IndianaCrawfordCounty(399):pacificOceanUSA-EastStdTime-IndianaStarkeCounty(400):pacificOceanUSA-EastStdTime-IndianaSwitzerlandCounty(401):pacificOceanUSA-CentTime(402):pacificOceanUSA-CentTime-MichiganWisconsinborder(403):pacificOceanUSA-CentTime-NorthDakotaOliverCounty(404):pacificOceanUSA-MountTime(405):pacificOceanUSA-MountTime-SouthIdahoAndEastOregon(406):pacificOceanUSA-MountTime-Navajo(407):pacificOceanUSA-MountStdTime-Arizona(408):pacificOceanUSA-PacificTime(409):pacificOceanUSA-AlaskaTime(410):pacificOceanUSA-AlaskaTime-AlaskaPanhandle(411):pacificOceanUSA-AlaskaTime-AlaskaPanhandleNeck(412):pacificOceanUSA-AlaskaTime-WestAlaska(413):pacificOceanUSA-AleutianIslands(414):pacificOceanUSA-Hawaii(415):pacificOcean-USMinorOutlyingIslands-JohnstonAtoll(416):pacificOcean-USMinorOutlyingIslands-MidwayIslands(417):pacificOcean-USMinorOutlyingIslands-WakeIsland(418):pacificOcean-Vanuatu(419):pacificOcean-WallisAndFutuna(420),The daylight savings location. Note: Locations are alphabetically ordered and the corresponding code is not reflected in CLI.
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.1.1.1.52,BLADETYPE4-NETWORK-MIB::agNewDaylightSavings,INTEGER,read-write,,current,none(0):africa-Algeria(1):africa-Angola(2):africa-Benin(3):africa-Botswana(4):africa-Burkina-Faso(5):africa-Burundi(6):africa-Cameroon(7):africa-Central-African-Rep(8):africa-Chad(9):africa-Congo-WestDemRepCongo(10):africa-Congo-EastDemRepCongo(11):africa-Congo-Rep(12):africa-Cote-dIvoire(13):africa-Djibouti(14):africa-Egypt(15):africa-Equatorial-Guinea(16):africa-Eritrea(17):africa-Ethiopia(18):africa-Gabon(19):africa-Gambia(20):africa-Ghana(21):africa-Guinea(22):africa-Guinea-Bissau(23):africa-Kenya(24):africa-Lesotho(25):africa-Liberia(26):africa-Libya(27):africa-Malawi(28):africa-Mali-SouthWestMali(29):africa-Mali-NorthEastMali(30):africa-Mauritania(31):africa-Morocco(32):africa-Mozambique(33):africa-Namibia(34):africa-Niger(35):africa-Nigeria(36):africa-Rwanda(37):africa-SaoTome-And-Principe(38):africa-Senegal(39):africa-SierraLeone(40):africa-Somalia(41):africa-SouthAfrica(42):africa-Spain-Mainland(43):africa-Spain-CeutaMelilla(44):africa-Spain-CanaryIslands(45):africa-Sudan(46):africa-Swaziland(47):africa-Tanzania(48):africa-Togo(49):africa-Tunisia(50):africa-Uganda(51):africa-Western-Sahara(52):africa-Zambia(53):africa-Zimbabwe(54):americas-Anguilla(55):americas-Antigua-Barbuda(56):americas-Argentina-EArgentina(57):americas-Argentina-MostLocations(58):americas-Argentina-Jujuy(59):americas-Argentina-Catamarca(60):americas-Argentina-Mendoza(61):americas-Aruba(62):americas-Bahamas(63):americas-Barbados(64):americas-Belize(65):americas-Bolivia(66):americas-Brazil-AtlanticIslands(67):americas-Brazil-AmapaEPara(68):americas-Brazil-NEBrazil(69):americas-Brazil-Pernambuco(70):americas-Brazil-Tocantins(71):americas-Brazil-AlagoasSergipe(72):americas-Brazil-SSEBrazil(73):americas-Brazil-MatoGrossoDoSul(74):americas-Brazil-WParaRondonia(75):americas-Brazil-Roraima(76):americas-Brazil-EAmazonas(77):americas-Brazil-WAmazonas(78):americas-Brazil-Acre(79):americas-Canada-NewfoundlandIsland(80):americas-Canada-AtlanTime-NovaScotia(81):americas-Canada-AtlanTime-ELabrador(82):americas-Canada-EastTime-OntarioMostlocation(83):americas-Canada-EastTime-ThunderBay(84):americas-Canada-EastStdTime-PangnirtungNunavut(85):americas-Canada-EastStdTime-EastNunavut(86):americas-Canada-EastStdTime-CenNunavut(87):americas-Canada-CenTime-ManitobaWestOntario(88):americas-Canada-CenTime-RainyRiver(89):americas-Canada-CenTime-WestNunavut(90):americas-Canada-CenStdTime-SaskatchewanMostlocation(91):americas-Canada-CenStdTime-SaskatchewanMidwest(92):americas-Canada-MountTime-AlbertaEastBritishColumbia(93):americas-Canada-MountTime-CentralNorthwestTerritories(94):americas-Canada-MountTime-WestNorthwestTerritories(95):americas-Canada-MountStdTime-EastBritishColumbia(96):americas-Canada-PacificTime-WestBritishColumbia(97):americas-Canada-PacificTime-SouthYukon(98):americas-Canada-PacificTime-NorthYukon(99):americas-CaymanIslands(100):americas-Chile-MostLocation(101):americas-Chile-EasterIsland(102):americas-Colombia(103):americas-CostaRica(104):americas-Cuba(105):americas-Dominica(106):americas-DominicanRepublic(107):americas-Ecuador(108):americas-ElSalvado(109):americas-FrenchGuiana(110):americas-Greenland-MostLocation(111):americas-Greenland-EastCoastNorthScoresbysund(112):americas-Greenland-ScoresbysundIttoqqortoormiit(113):americas-Greenland-ThulePituffik(114):americas-Grenada(115):americas-Guadeloupe(116):americas-Guatemala(117):americas-Guyana(118):americas-Haiti(119):americas-Honduras(120):americas-Jamaica(121):americas-Martinique(122):americas-Mexico-CentTime-Mostlocations(123):americas-Mexico-CentTime-QuintanaRoo(124):americas-Mexico-CentTime-CampecheYucatan(125):americas-Mexico-CentTime-CoahDurangoNLTamaulipas(126):americas-Mexico-MountTime-SBajaNayaritSinaloa(127):americas-Mexico-MountTime-Chihuahua(128):americas-Mexico-MountStdTime-Sonora(129):americas-Mexico-PacificTime(130):americas-Montserrat(131):americas-NetherlandsAntilles(132):americas-Nicaragua(133):americas-Panama(134):americas-Paraguay(135):americas-Peru(136):americas-PuertoRico(137):americas-StKittsAndNevis(138):americas-StLucia(139):americas-StPierreAndMiquelon(140):americas-StVincent(141):americas-Suriname(142):americas-TrinidadAndTobago(143):americas-TurksAndCaicosIs(144):americas-USA-EastTime(145):americas-USA-EastTime-MichiganMostLocation(146):americas-USA-EastTime-KentuckyLouisvilleArea(147):americas-USA-EastTime-KentuckyWayneCounty(148):americas-USA-EastStdTime-IndianaMostLocations(149):americas-USA-EastStdTime-IndianaCrawfordCounty(150):americas-USA-EastStdTime-IndianaStarkeCounty(151):americas-USA-EastStdTime-IndianaSwitzerlandCounty(152):americas-USA-CentTime(153):americas-USA-CentTime-MichiganWisconsinborder(154):americas-USA-CentTime-NorthDakotaOliverCounty(155):americas-USA-MountTime(156):americas-USA-MountTime-SouthIdahoAndEastOregon(157):americas-USA-MountTime-Navajo(158):americas-USA-MountStdTime-Arizona(159):americas-USA-PacificTime(160):americas-USA-AlaskaTime(161):americas-USA-AlaskaTime-AlaskaPanhandle(162):americas-USA-AlaskaTime-AlaskaPanhandleNeck(163):americas-USA-AlaskaTime-WestAlaska(164):americas-USA-AleutianIslands(165):americas-USA-Hawaii(166):americas-Uruguay(167):americas-Venezuela(168):americas-VirginIslands-UK(169):americas-VirginIslands-US(170):antarctica-McMurdoStationRossIsland(171):antarctica-Amundsen-ScottStationSouthPole(172):antarctica-PalmerStationAnversIsland(173):antarctica-MawsonStationHolmeBay(174):antarctica-DavisStationVestfoldHills(175):antarctica-CaseyStationBaileyPeninsula(176):antarctica-VostokStationSMagneticPole(177):antarctica-Dumont-dUrvilleBaseTerreAdelie(178):antarctica-SyowaStationEOngulI(179):arcticOcean-Svalbard(180):arcticOcean-JanMayen(181):asia-Afghanistan(182):asia-Armenia(183):asia-Azerbaijan(184):asia-Bahrain(185):asia-Bangladesh(186):asia-Bhutan(187):asia-Brunei(188):asia-Cambodia(189):asia-China-EastChinaBeijingGuangdongShanghai(190):asia-China-Heilongjiang(191):asia-China-CentralChinaGansuGuizhouSichuanYunnan(192):asia-China-TibetmostofXinjiangUyghur(193):asia-China-SouthwestXinjiangUyghur(194):asia-Cyprus(195):asia-EastTimor(196):asia-Georgia(197):asia-HongKong(198):asia-India(199):asia-Indonesia-JavaAndSumatra(200):asia-Indonesia-WestCentralBorneo(201):asia-Indonesia-EastSouthBorneoBaliWestTimor(202):asia-Indonesia-IrianJayaAndMoluccas(203):asia-Iran(204):asia-Iraq(205):asia-Israel(206):asia-Japan(207):asia-Jordan(208):asia-Kazakhstan-MostLocations(209):asia-Kazakhstan-QyzylordaKyzylorda(210):asia-Kazakhstan-Aqtobe(211):asia-Kazakhstan-AtyrauMangghystau(212):asia-Kazakhstan-WestKazakhstan(213):asia-Korea-North(214):asia-Korea-South(215):asia-Kuwait(216):asia-Kyrgyzstan(217):asia-Laos(218):asia-Lebanon(219):asia-Macau(220):asia-Malaysia-PeninsularMalaysia(221):asia-Malaysia-SabahSarawak(222):asia-Mongolia-MostLocations(223):asia-Mongolia-BayanOlgiyGoviAltaiHovdUvsZavkhan(224):asia-Mongolia-DornodSukhbaatar(225):asia-Myanmar(226):asia-Nepal(227):asia-Oman(228):asia-Pakistan(229):asia-Palestine(230):asia-Philippines(231):asia-Qatar(232):asia-Russia-Moscow-01Kaliningrad(233):asia-Russia-Moscow00WestRussia(234):asia-Russia-Moscow01CaspianSea(235):asia-Russia-Moscow02Urals(236):asia-Russia-Moscow03WestSiberia(237):asia-Russia-Moscow03Novosibirsk(238):asia-Russia-Moscow04YeniseiRiver(239):asia-Russia-Moscow05LakeBaikal(240):asia-Russia-Moscow06LenaRiver(241):asia-Russia-Moscow07AmurRiver(242):asia-Russia-Moscow07SakhalinIsland(243):asia-Russia-Moscow08Magadan(244):asia-Russia-Moscow09Kamchatka(245):asia-Russia-Moscow10BeringSea(246):asia-SaudiArabia(247):asia-Singapore(248):asia-SriLanka(249):asia-Syria(250):asia-Taiwan(251):asia-Tajikistan(252):asia-Thailand(253):asia-Turkmenistan(254):asia-UnitedArabEmirates(255):asia-Uzbekistan-WestUzbekistan(256):asia-Uzbekistan-EastUzbekistan(257):asia-Vietnam(258):asia-Yemen(259):atlanticOcean-Bermuda(260):atlanticOcean-CapeVerde(261):atlanticOcean-FaeroeIslands(262):atlanticOcean-FalklandIslands(263):atlanticOcean-Iceland(264):atlanticOcean-Portugal-Mainland(265):atlanticOcean-Portugal-MadeiraIslands(266):atlanticOcean-Portugal-Azores(267):atlanticOcean-SouthGeorgia-SouthSandwichIslands(268):atlanticOcean-Spain-Mainland(269):atlanticOcean-Spain-CeutaMelilla(270):atlanticOcean-Spain-CanaryIslands(271):atlanticOcean-StHelena(272):atlanticOcean-Svalbard-JanMayen(273):australia-LordHoweIsland(274):australia-Tasmania(275):australia-Victoria(276):australia-NewSouthWales-MostLocations(277):australia-NewSouthWales-Yancowinna(278):australia-Queensland-MostLocations(279):australia-Queensland-HolidayIslands(280):australia-SouthAustralia(281):australia-NorthernTerritory(282):australia-WesternAustralia(283):europe-Albania(284):europe-Andorra(285):europe-Austria(286):europe-Belarus(287):europe-Belgium(288):europe-BosniaHerzegovina(289):europe-Britain-UKGreatBritain(290):europe-Britain-UKNorthernIreland(291):europe-Bulgaria(292):europe-Croatia(293):europe-CzechRepublic(294):europe-Denmark(295):europe-Estonia(296):europe-Finland(297):europe-France(298):europe-Germany(299):europe-Gibraltar(300):europe-Greece(301):europe-Hungary(302):europe-Ireland(303):europe-Italy(304):europe-Latvia(305):europe-Liechtenstein(306):europe-Lithuania(307):europe-Luxembourg(308):europe-Macedonia(309):europe-Malta(310):europe-Moldova(311):europe-Monaco(312):europe-Netherlands(313):europe-Norway(314):europe-Poland(315):europe-Portugal-Mainland(316):europe-Portugal-MadeiraIslands(317):europe-Portugal-Azores(318):europe-Romania(319):europe-Russia-Moscow-01Kaliningrad(320):europe-Russia-Moscow00WestRussia(321):europe-Russia-Moscow01CaspianSea(322):europe-Russia-Moscow02Urals(323):europe-Russia-Moscow03WestSiberia(324):europe-Russia-Moscow03Novosibirsk(325):europe-Russia-Moscow04YeniseiRiver(326):europe-Russia-Moscow05LakeBaikal(327):europe-Russia-Moscow06LenaRiver(328):europe-Russia-Moscow07AmurRiver(329):europe-Russia-Moscow07SakhalinIsland(330):europe-Russia-Moscow08Magadan(331):europe-Russia-Moscow09Kamchatka(332):europe-Russia-Moscow10BeringSea(333):europe-SanMarino(334):europe-Slovakia(335):europe-Slovenia(336):europe-Spain-Mainland(337):europe-Spain-CeutaAndMelilla(338):europe-Spain-CanaryIslands(339):europe-Sweden(340):europe-Switzerland(341):europe-Turkey(342):europe-Ukraine-MostLocations(343):europe-Ukraine-Ruthenia(344):europe-Ukraine-Zaporozhye-ELugansk(345):europe-Ukraine-CentralCrimea(346):europe-VaticanCity(347):europe-Yugoslavia(348):indianOcean-BritishIndianOceanTerritory(349):indianOcean-ChristmasIsland(350):indianOcean-CocosOrKeelingIslands(351):indianOcean-Comoros(352):indianOcean-FrenchSouthernAndAntarcticLands(353):indianOcean-Madagascar(354):indianOcean-Maldives(355):indianOcean-Mauritius(356):indianOcean-Mayotte(357):indianOcean-Reunion(358):indianOcean-Seychelles(359):pacificOcean-Chile-MostLocations(360):pacificOcean-Chile-EasterIslandSalayGomez(361):pacificOcean-CookIslands(362):pacificOcean-Ecuador(363):pacificOcean-Fiji(364):pacificOcean-FrenchPolynesia-SocietyIslands(365):pacificOcean-FrenchPolynesia-MarquesasIslands(366):pacificOcean-FrenchPolynesia-GambierIslands(367):pacificOcean-Guam(368):pacificOcean-Kiribati-GilbertIslands(369):pacificOcean-Kiribati-PhoenixIslands(370):pacificOcean-Kiribati-LineIslands(371):pacificOcean-MarshallIslands-MostLocations(372):pacificOcean-MarshallIslands-Kwajalein(373):pacificOcean-Micronesia-Yap(374):pacificOcean-Micronesia-TrukOrChuuk(375):pacificOcean-Micronesia-PonapeOrPohnpei(376):pacificOcean-Micronesia-Kosrae(377):pacificOcean-Nauru(378):pacificOcean-NewCaledonia(379):pacificOcean-NewZealand-MostLocations(380):pacificOcean-NewZealand-ChathamIslands(381):pacificOcean-Niue(382):pacificOcean-NorfolkIsland(383):pacificOcean-NorthernMarianaIslands(384):pacificOcean-Palau(385):pacificOcean-PapuaNewGuinea(386):pacificOcean-Pitcairn(387):pacificOcean-SamoaAmerican(388):pacificOcean-SamoaWestern(389):pacificOcean-SolomonIslands(390):pacificOcean-Tokelau(391):pacificOcean-Tonga(392):pacificOcean-Tuvalu(393):pacificOceanUSA-EastTime(394):pacificOceanUSA-EastTime-MichiganMostLocations(395):pacificOceanUSA-EastTime-KentuckyLouisvilleArea(396):pacificOceanUSA-EastTime-KentuckyWayneCounty(397):pacificOceanUSA-EastStdTime-IndianaMostLocations(398):pacificOceanUSA-EastStdTime-IndianaCrawfordCounty(399):pacificOceanUSA-EastStdTime-IndianaStarkeCounty(400):pacificOceanUSA-EastStdTime-IndianaSwitzerlandCounty(401):pacificOceanUSA-CentTime(402):pacificOceanUSA-CentTime-MichiganWisconsinborder(403):pacificOceanUSA-CentTime-NorthDakotaOliverCounty(404):pacificOceanUSA-MountTime(405):pacificOceanUSA-MountTime-SouthIdahoAndEastOregon(406):pacificOceanUSA-MountTime-Navajo(407):pacificOceanUSA-MountStdTime-Arizona(408):pacificOceanUSA-PacificTime(409):pacificOceanUSA-AlaskaTime(410):pacificOceanUSA-AlaskaTime-AlaskaPanhandle(411):pacificOceanUSA-AlaskaTime-AlaskaPanhandleNeck(412):pacificOceanUSA-AlaskaTime-WestAlaska(413):pacificOceanUSA-AleutianIslands(414):pacificOceanUSA-Hawaii(415):pacificOcean-USMinorOutlyingIslands-JohnstonAtoll(416):pacificOcean-USMinorOutlyingIslands-MidwayIslands(417):pacificOcean-USMinorOutlyingIslands-WakeIsland(418):pacificOcean-Vanuatu(419):pacificOceanWallisAndFutuna(420),The daylight savings location. Note: Locations are alphabetically ordered and the corresponding code is not reflected in CLI.
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.1.1.1.53,BLADETYPE4-NETWORK-MIB::agCurCfgSysDlight,INTEGER,read-only,,current,enabled(1):disabled(2),Current daylight savings time status.
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.1.1.1.54,BLADETYPE4-NETWORK-MIB::agNewCfgSysDlight,INTEGER,read-write,,current,enabled(1):disabled(2),Enable/disable daylight savings time.
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.1.1.1.55,BLADETYPE4-NETWORK-MIB::agCurCfgIdleCLITimeout,Integer32,read-only,,current,,Set idle CLI sessions timeout.
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.1.1.1.56,BLADETYPE4-NETWORK-MIB::agNewCfgIdleCLITimeout,Integer32,read-write,,current,,Set idle CLI sessions timeout.
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.1.1.1.57,BLADETYPE4-NETWORK-MIB::agCurCfgUfdTrap,INTEGER,read-only,,current,enabled(2):disabled(3),The current status of the UFDFO SNMP trap.
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.1.1.1.58,BLADETYPE4-NETWORK-MIB::agNewCfgUfdTrap,INTEGER,read-write,,current,enabled(2):disabled(3),Enable or disable sending UFDFO SNMP trap.
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.1.1.1.59,BLADETYPE4-NETWORK-MIB::agCurCfgReminders,INTEGER,read-only,,current,enable(1):disable(2),Current status of reminders feature.
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.1.1.1.60,BLADETYPE4-NETWORK-MIB::agNewCfgReminders,INTEGER,read-write,,current,enable(1):disable(2),Enable or disable reminders feature.
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.1.1.1.66,BLADETYPE4-NETWORK-MIB::agCurBootNxtCliMode,INTEGER,read-only,,current,bladeos-cli(1):iscli(2),Current boot mode.
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.1.1.1.67,BLADETYPE4-NETWORK-MIB::agNewBootNxtCliMode,INTEGER,read-write,,current,bladeos-cli(1):iscli(2),Next cli boot mode.
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.1.1.1.70,BLADETYPE4-NETWORK-MIB::agCurCfgDhcp,INTEGER,read-only,,current,enabled(1):disabled(2),Enable or disable the use of DHCP, as currently configured in the  current_configuration block.
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.1.1.1.71,BLADETYPE4-NETWORK-MIB::agNewCfgDhcp,INTEGER,read-write,,current,enabled(1):disabled(2),Enable or disable the use of DHCP, in the new_configuration block.
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.1.1.1.72,BLADETYPE4-NETWORK-MIB::agCfgL3Status,INTEGER,read-only,,current,enabled(1):disabled(2),The current status of L3 feature.
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.1.1.1.73,BLADETYPE4-NETWORK-MIB::agCurCfgHprompt,INTEGER,read-only,,current,enable(1):disable(2),Current status of hprompt.
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.1.1.1.75,BLADETYPE4-NETWORK-MIB::agNewCfgHprompt,INTEGER,read-write,,current,enable(1):disable(2),New status of hpprompt.
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.1.1.1.76,BLADETYPE4-NETWORK-MIB::agCurCfgLoginNotice,OCTET,read-only,,current,,The user defined login notice.
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.1.1.1.77,BLADETYPE4-NETWORK-MIB::agNewCfgLoginNotice,OCTET,read-write,,current,,The user defined login notice.
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.1.1.1.78,BLADETYPE4-NETWORK-MIB::agCurBootNxtCliModePrompt,INTEGER,read-only,,current,disable(1):enable(2),Current status of selectable CLI mode prompt.
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.1.1.1.79,BLADETYPE4-NETWORK-MIB::agNewBootNxtCliModePrompt,INTEGER,read-write,,current,disable(1):enable(2),Next status of selectable CLI mode prompt.
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.1.1.1.82,BLADETYPE4-NETWORK-MIB::agCurCfgOldDst,INTEGER,read-only,,current,enabled(1):disabled(2),Enable or disable system DST for US.
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.1.1.1.83,BLADETYPE4-NETWORK-MIB::agNewCfgOldDst,INTEGER,read-write,,current,enabled(1):disabled(2),Enable or disable system DST for US.
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.1.1.1.91,BLADETYPE4-NETWORK-MIB::agHavePanicDump,INTEGER,read-only,,current,havePanic(1):noHavePanic(2),This object, when read, gives the user the information whether a panic dump exist in flash.
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.1.1.1.92,BLADETYPE4-NETWORK-MIB::agCurHttpAcces,INTEGER,read-only,,current,enable(1):disable(2),Current HTTP server access state.
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.1.1.1.93,BLADETYPE4-NETWORK-MIB::agNewHttpAcces,INTEGER,read-write,,current,enable(1):disable(2),New HTTP server acces state.
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.1.1.1.94,BLADETYPE4-NETWORK-MIB::agCurCfgHttpsServerAccess,INTEGER,read-only,,current,enabled(1):disabled(0),Current HTTPS server access state.
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.1.1.1.95,BLADETYPE4-NETWORK-MIB::agNewCfgHttpsServerAccess,INTEGER,read-write,,current,enabled(1):disabled(0),Enable/disable HTTPS server access.
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.1.1.1.96,BLADETYPE4-NETWORK-MIB::agCurCfgTelnetAccess,INTEGER,read-only,,current,enabled(1):disabled(0),Current telnet access state.
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.1.1.1.97,BLADETYPE4-NETWORK-MIB::agNewCfgTelnetAccess,INTEGER,read-write,,current,enabled(1):disabled(0),Enable/disable telnet access.
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.1.1.1.102,BLADETYPE4-NETWORK-MIB::agCurCfgResetControl,INTEGER,read-only,,current,enable(1):disable(2),Current reset control state.
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.1.1.1.103,BLADETYPE4-NETWORK-MIB::agNewCfgResetControl,INTEGER,read-write,,current,enable(1):disable(2),Enable/disable reset control after panic.
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.1.1.2,BLADETYPE4-NETWORK-MIB::agPortConfig,,,,,,
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.1.1.2.1,BLADETYPE4-NETWORK-MIB::agPortTableMaxEnt,Integer32,read-only,,current,,The maximum number of rows in the port configuration host table.
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.1.1.2.2,BLADETYPE4-NETWORK-MIB::agPortCurCfgTable,,not-accessible,,current,,The table of port configuration in the current_configuration block.
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.1.1.2.2.1,BLADETYPE4-NETWORK-MIB::agPortCurCfgTableEntry,,not-accessible,agPortCurCfgIndx,current,,A row in the port table in the current_configuration block.
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.1.1.2.2.1.1,BLADETYPE4-NETWORK-MIB::agPortCurCfgIndx,Unsigned32,read-only,,current,,The index of the row in port configurations table.
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.1.1.2.2.1.2,BLADETYPE4-NETWORK-MIB::agPortCurCfgState,INTEGER,read-only,,current,enabled(2):disabled(3),This is the state of the port.
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.1.1.2.2.1.3,BLADETYPE4-NETWORK-MIB::agPortCurCfgVlanTag,INTEGER,read-only,,current,tagged(2):untagged(3),This is VLAN tag state of the port
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.1.1.2.2.1.5,BLADETYPE4-NETWORK-MIB::agPortCurCfgRmon,INTEGER,read-only,,current,on(2):off(3),This object is used to turn RMON on or off on the port.
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.1.1.2.2.1.6,BLADETYPE4-NETWORK-MIB::agPortCurCfgPVID,INTEGER,read-only,,current,,The default VLAN ID for the port. 
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.1.1.2.2.1.11,BLADETYPE4-NETWORK-MIB::agPortCurCfgGigEthAutoNeg,INTEGER,read-only,,current,on(2):off(3),This object is used to turn the autonegotiation on or off for gigabit Ethernet connection.
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.1.1.2.2.1.12,BLADETYPE4-NETWORK-MIB::agPortCurCfgGigEthSpeed,INTEGER,read-only,,current,mbs10(2):mbs100(3):any(4):mbs1000(5),Selects the port speed for gigabit Ethernet connection.
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.1.1.2.2.1.13,BLADETYPE4-NETWORK-MIB::agPortCurCfgGigEthMode,INTEGER,read-only,,current,full-duplex(2):half-duplex(3):any(4),This object is used to select port mode for gigabit Ethernet connection.
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.1.1.2.2.1.14,BLADETYPE4-NETWORK-MIB::agPortCurCfgGigEthFctl,INTEGER,read-only,,current,transmit(2):receive(3):both(4):none(5),This object is used to select port flow control for gigabit Ethernet connection.
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.1.1.2.2.1.15,BLADETYPE4-NETWORK-MIB::agPortCurCfgPortName,OCTET,read-only,,current,,The switch port name.
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.1.1.2.2.1.18,BLADETYPE4-NETWORK-MIB::agPortCurCfgLinkTrap,INTEGER,read-only,,current,enabled(1):disabled(2),Indicates whether linkUp/linkDown traps should be generated for this interface. By default, this object should have the value enabled(1) for interfaces which do not operate on 'top' of any other interface (as defined in the ifStackTable), and disabled(2) otherwise.
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.1.1.2.2.1.19,BLADETYPE4-NETWORK-MIB::agPortCurCfgTagPVID,INTEGER,read-only,,current,tagged(2):untagged(3),This is PVID tag state of the port
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.1.1.2.2.1.20,BLADETYPE4-NETWORK-MIB::agPortCurCfgMulticastThreshold,INTEGER,read-only,,current,enabled(1):disabled(2),Current status of the port's Multicast Threshold.
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.1.1.2.2.1.21,BLADETYPE4-NETWORK-MIB::agPortCurCfgMulticastThresholdRate,INTEGER,read-only,,current,,Current port's Multicast Threshold Rate.
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.1.1.2.2.1.22,BLADETYPE4-NETWORK-MIB::agPortCurCfgBroadcastThreshold,INTEGER,read-only,,current,enabled(1):disabled(2),Current status of the port's Broadcast Threshold.
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.1.1.2.2.1.23,BLADETYPE4-NETWORK-MIB::agPortCurCfgBroadcastThresholdRate,INTEGER,read-only,,current,,Current port's Broadcast Threshold Rate.
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.1.1.2.2.1.24,BLADETYPE4-NETWORK-MIB::agPortCurCfgDLFThreshold,INTEGER,read-only,,current,enabled(1):disabled(2),Current status of the port's Destination Lookup Fail Threshold.
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.1.1.2.2.1.25,BLADETYPE4-NETWORK-MIB::agPortCurCfgDLFThresholdRate,INTEGER,read-only,,current,,Current port's Destination Lookup Fail Threshold Rate.
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.1.1.2.2.1.26,BLADETYPE4-NETWORK-MIB::agPortCurCfgPortMedia,INTEGER,read-only,,current,auto(0):copper(1):fiber(2),The switch port media.
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.1.1.2.2.1.27,BLADETYPE4-NETWORK-MIB::agPortCurCfgPortMediat,INTEGER,read-only,,current,copper(1):sfp(0),The switch port media.
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.1.1.2.2.1.28,BLADETYPE4-NETWORK-MIB::agPortCurCfgType,OCTET,read-only,,current,,The switch port type.
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.1.1.2.3,BLADETYPE4-NETWORK-MIB::agPortNewCfgTable,,not-accessible,,current,,The table of port configuration in the new_configuration block.
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.1.1.2.3.1,BLADETYPE4-NETWORK-MIB::agPortNewCfgTableEntry,,not-accessible,agPortNewCfgIndx,current,,A row in the port configuration table in the new_configuration block.
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.1.1.2.3.1.1,BLADETYPE4-NETWORK-MIB::agPortNewCfgIndx,Unsigned32,read-only,,current,,The index of the row in port configurations table.
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.1.1.2.3.1.2,BLADETYPE4-NETWORK-MIB::agPortNewCfgState,INTEGER,read-write,,current,enabled(2):disabled(3),This is the state of the port.
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.1.1.2.3.1.3,BLADETYPE4-NETWORK-MIB::agPortNewCfgVlanTag,INTEGER,read-write,,current,tagged(2):untagged(3),This is VLAN tag state of the port
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.1.1.2.3.1.5,BLADETYPE4-NETWORK-MIB::agPortNewCfgRmon,INTEGER,read-write,,current,on(2):off(3),This object is used to turn RMON on or off on the port.
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.1.1.2.3.1.6,BLADETYPE4-NETWORK-MIB::agPortNewCfgPVID,INTEGER,read-write,,current,,The default VLAN ID for the port. 
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.1.1.2.3.1.11,BLADETYPE4-NETWORK-MIB::agPortNewCfgGigEthAutoNeg,INTEGER,read-write,,current,on(2):off(3),This object is used to turn the autonegotiation on or off for gigabit Ethernet connection.
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.1.1.2.3.1.12,BLADETYPE4-NETWORK-MIB::agPortNewCfgGigEthSpeed,INTEGER,read-write,,current,mbs10(2):mbs100(3):any(4):mbs1000(5),Selects the port speed for gigabit Ethernet connection.
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.1.1.2.3.1.13,BLADETYPE4-NETWORK-MIB::agPortNewCfgGigEthMode,INTEGER,read-write,,current,full-duplex(2):half-duplex(3):any(4),This object is used to select port mode for gigabit Ethernet connection. 
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.1.1.2.3.1.14,BLADETYPE4-NETWORK-MIB::agPortNewCfgGigEthFctl,INTEGER,read-write,,current,transmit(2):receive(3):both(4):none(5),This object is used to select port flow control for gigabit Ethernet connection.
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.1.1.2.3.1.15,BLADETYPE4-NETWORK-MIB::agPortNewCfgPortName,OCTET,read-write,,current,,The switch port name.
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.1.1.2.3.1.18,BLADETYPE4-NETWORK-MIB::agPortNewCfgLinkTrap,INTEGER,read-write,,current,enabled(1):disabled(2),Indicates whether linkUp/linkDown traps should be generated for this interface. By default, this object should have the value enabled(1) for interfaces which do not operate on 'top' of any other interface (as defined in the ifStackTable), and disabled(2) otherwise.
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.1.1.2.3.1.19,BLADETYPE4-NETWORK-MIB::agPortNewCfgTagPVID,INTEGER,read-write,,current,tagged(2):untagged(3),This is PVID tag state of the port
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.1.1.2.3.1.20,BLADETYPE4-NETWORK-MIB::agPortNewCfgMulticastThreshold,INTEGER,read-write,,current,enabled(1):disabled(2),New status of the port's Multicast Threshold.
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.1.1.2.3.1.21,BLADETYPE4-NETWORK-MIB::agPortNewCfgMulticastThresholdRate,INTEGER,read-write,,current,,New port's Multicast Threshold Rate.
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.1.1.2.3.1.22,BLADETYPE4-NETWORK-MIB::agPortNewCfgBroadcastThreshold,INTEGER,read-write,,current,enabled(1):disabled(2),New status of the port's Broadcast Threshold.
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.1.1.2.3.1.23,BLADETYPE4-NETWORK-MIB::agPortNewCfgBroadcastThresholdRate,INTEGER,read-write,,current,,New port's Broadcast Threshold Rate.
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.1.1.2.3.1.24,BLADETYPE4-NETWORK-MIB::agPortNewCfgDLFThreshold,INTEGER,read-write,,current,enabled(1):disabled(2),New status of the port's Destination Lookup Fail Threshold.
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.1.1.2.3.1.25,BLADETYPE4-NETWORK-MIB::agPortNewCfgDLFThresholdRate,INTEGER,read-write,,current,,New port's Destination Lookup Fail Threshold Rate.
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.1.1.2.3.1.26,BLADETYPE4-NETWORK-MIB::agPortNewCfgPortMedia,INTEGER,read-write,,current,auto(0):copper(1):fiber(2),New status of the port's Media.
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.1.1.2.3.1.27,BLADETYPE4-NETWORK-MIB::agPortNewCfgPortMediat,INTEGER,read-write,,current,copper(1):sfp(0),New status of the port's Media.
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.1.1.2.3.1.28,BLADETYPE4-NETWORK-MIB::agPortNewCfgType,OCTET,read-only,,current,,The switch port type.
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.1.1.3,BLADETYPE4-NETWORK-MIB::agRadiusConfig,,,,,,
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.1.1.3.1,BLADETYPE4-NETWORK-MIB::radCurCfgPrimaryServer,IpAddress,read-only,,current,,The IP address of the Primary RADIUS server.
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.1.1.3.2,BLADETYPE4-NETWORK-MIB::radNewCfgPrimaryServer,IpAddress,read-write,,current,,The IP address of the Primary RADIUS server.
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.1.1.3.3,BLADETYPE4-NETWORK-MIB::radCurCfgSecondaryServer,IpAddress,read-only,,current,,The IP address of the Secondary RADIUS server.
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.1.1.3.4,BLADETYPE4-NETWORK-MIB::radNewCfgSecondaryServer,IpAddress,read-write,,current,,The IP address of the Secondary RADIUS server.
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.1.1.3.5,BLADETYPE4-NETWORK-MIB::radCurCfgPort,INTEGER,read-only,,current,,Specify the RADIUS port number.
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.1.1.3.6,BLADETYPE4-NETWORK-MIB::radNewCfgPort,INTEGER,read-write,,current,,Speicfy the RADIUS port number.
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.1.1.3.7,BLADETYPE4-NETWORK-MIB::radCurCfgTimeout,INTEGER,read-only,,current,,The maximum number of seconds before resending authentication to RADIUS server.
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.1.1.3.8,BLADETYPE4-NETWORK-MIB::radNewCfgTimeout,INTEGER,read-write,,current,,The maximum number of seconds before resending authentication to RADIUS server.
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.1.1.3.9,BLADETYPE4-NETWORK-MIB::radCurCfgRetries,INTEGER,read-only,,current,,Number of retries to the RADIUS server.
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.1.1.3.10,BLADETYPE4-NETWORK-MIB::radNewCfgRetries,INTEGER,read-write,,current,,Number of retries to the RADIUS server.
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.1.1.3.11,BLADETYPE4-NETWORK-MIB::radCurCfgState,INTEGER,read-only,,current,enabled(2):disabled(3),Enable or disable RADIUS authentication.
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.1.1.3.12,BLADETYPE4-NETWORK-MIB::radNewCfgState,INTEGER,read-write,,current,enabled(2):disabled(3),Enable or disable RADIUS authentication.
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.1.1.3.13,BLADETYPE4-NETWORK-MIB::radCurCfgAuthenString,OCTET,read-only,,current,,The RADIUS authentication string.
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.1.1.3.14,BLADETYPE4-NETWORK-MIB::radNewCfgAuthenString,OCTET,read-write,,current,,The RADIUS authentication string.
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.1.1.3.15,BLADETYPE4-NETWORK-MIB::radCurCfgBackdoor,INTEGER,read-only,,current,enabled(1):disabled(2),Enable or disable RADIUS backdoor for telnet/ssh/http/https.
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.1.1.3.16,BLADETYPE4-NETWORK-MIB::radNewCfgBackdoor,INTEGER,read-write,,current,enabled(1):disabled(2),Enable or disable RADIUS backdoor for telnet/ssh/http/https.
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.1.1.3.17,BLADETYPE4-NETWORK-MIB::radCurCfgAuthenSecondString,OCTET,read-only,,current,,The second RADIUS authentication string.
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.1.1.3.18,BLADETYPE4-NETWORK-MIB::radNewCfgAuthenSecondString,OCTET,read-write,,current,,The second RADIUS authentication string.
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.1.1.3.19,BLADETYPE4-NETWORK-MIB::radCurCfgSecBd,INTEGER,read-only,,current,enabled(1):disabled(2),Enable or disable RADIUS secure backdoor for telnet.
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.1.1.3.20,BLADETYPE4-NETWORK-MIB::radNewCfgSecBd,INTEGER,read-write,,current,enabled(1):disabled(2),Enable or disable RADIUS secure backdoor for telnet.
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.1.1.4,BLADETYPE4-NETWORK-MIB::agNTP,,,,,,
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.1.1.4.1,BLADETYPE4-NETWORK-MIB::agCurCfgNTPServer,IpAddress,read-only,,current,,The NTP Server Address.
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.1.1.4.2,BLADETYPE4-NETWORK-MIB::agNewCfgNTPServer,IpAddress,read-write,,current,,The NTP Server Address.
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.1.1.4.3,BLADETYPE4-NETWORK-MIB::agCurCfgNTPResyncInterval,INTEGER,read-only,,current,,The NTP Server resync interval in minutes.
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.1.1.4.4,BLADETYPE4-NETWORK-MIB::agNewCfgNTPResyncInterval,INTEGER,read-write,,current,,The NTP Server resync interval in minutes.
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.1.1.4.9,BLADETYPE4-NETWORK-MIB::agCurCfgNTPService,INTEGER,read-only,,current,enabled(1):disabled(2),Enable/disable NTP Service.
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.1.1.4.10,BLADETYPE4-NETWORK-MIB::agNewCfgNTPService,INTEGER,read-write,,current,enabled(1):disabled(2),Enable/disable NTP Service.
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.1.1.4.11,BLADETYPE4-NETWORK-MIB::agCurCfgNTPSecServer,IpAddress,read-only,,current,,The Secondary NTP Server Address.
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.1.1.4.12,BLADETYPE4-NETWORK-MIB::agNewCfgNTPSecServer,IpAddress,read-write,,current,,The Secondary NTP Server Address.
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.1.1.5,BLADETYPE4-NETWORK-MIB::agSyslog,,,,,,
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.1.1.5.1,BLADETYPE4-NETWORK-MIB::agCurCfgSyslogHost,IpAddress,read-only,,current,,The syslog host IP address, as currently configured in the current_configuration block.
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.1.1.5.2,BLADETYPE4-NETWORK-MIB::agNewCfgSyslogHost,IpAddress,read-write,,current,,The syslog host IP address, in the new_configuration block.
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.1.1.5.3,BLADETYPE4-NETWORK-MIB::agCurCfgSyslog2Host,IpAddress,read-only,,current,,The second syslog host IP address, as currently configured in the current_configuration block.
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.1.1.5.4,BLADETYPE4-NETWORK-MIB::agNewCfgSyslog2Host,IpAddress,read-write,,current,,The second syslog host IP address, in the new_configuration block.
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.1.1.5.5,BLADETYPE4-NETWORK-MIB::agCurCfgSyslogFac,INTEGER,read-only,,current,local0(1):local1(2):local2(3):local3(4):local4(5):local5(6):local6(7):local7(8),The facility of syslog host in the current_configuration block.
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.1.1.5.6,BLADETYPE4-NETWORK-MIB::agNewCfgSyslogFac,INTEGER,read-write,,current,local0(1):local1(2):local2(3):local3(4):local4(5):local5(6):local6(7):local7(8),The facility of syslog host in the new_configuration block.
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.1.1.5.7,BLADETYPE4-NETWORK-MIB::agCurCfgSyslog2Fac,INTEGER,read-only,,current,local0(1):local1(2):local2(3):local3(4):local4(5):local5(6):local6(7):local7(8),The facility of syslog2 host in the current_configuration block.
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.1.1.5.8,BLADETYPE4-NETWORK-MIB::agNewCfgSyslog2Fac,INTEGER,read-write,,current,local0(1):local1(2):local2(3):local3(4):local4(5):local5(6):local6(7):local7(8),The facility of syslogs host in the new_configuration block.
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.1.1.5.9,BLADETYPE4-NETWORK-MIB::agClrSyslogMsgs,INTEGER,read-write,,current,other(1):reset(2),Clears all current Syslog messages.
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.1.1.5.10,BLADETYPE4-NETWORK-MIB::agSyslogMsgTableMaxSize,Integer32,read-only,,current,,The maximum number of rows in the syslog message table.
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.1.1.5.11,BLADETYPE4-NETWORK-MIB::agSyslogMsgTable,,not-accessible,,current,,The table of syslog messages.
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.1.1.5.11.1,BLADETYPE4-NETWORK-MIB::agSyslogMsgTableEntry,,not-accessible,agSyslogMsgIndex,current,,A syslog message stored on the switch.
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.1.1.5.11.1.1,BLADETYPE4-NETWORK-MIB::agSyslogMsgIndex,Integer32,read-only,,current,,The syslog message table index.
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.1.1.5.11.1.2,BLADETYPE4-NETWORK-MIB::agSyslogMessage,OCTET,read-only,,current,,The syslog message.
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.1.1.5.12,BLADETYPE4-NETWORK-MIB::agLog,,,,,,
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.1.1.5.12.1,BLADETYPE4-NETWORK-MIB::agNewCfgSyslogTrapConsole,INTEGER,read-write,,current,enabled(1):disabled(2),Enable or disable console syslog and SNMP trap, in the  new_configuration block.
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.1.1.5.12.2,BLADETYPE4-NETWORK-MIB::agCurCfgSyslogTrapConsole,INTEGER,read-only,,current,enabled(1):disabled(2),Enable or disable console syslog and SNMP trap, as currently  configured in the current_configuration block.
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.1.1.5.12.3,BLADETYPE4-NETWORK-MIB::agNewCfgSyslogTrapSystem,INTEGER,read-write,,current,enabled(1):disabled(2),Enable or disable system level syslog and SNMP trap, in the  new_configuration block.
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.1.1.5.12.4,BLADETYPE4-NETWORK-MIB::agCurCfgSyslogTrapSystem,INTEGER,read-only,,current,enabled(1):disabled(2),Enable or disable system level syslog and SNMP trap, as currently  configured in the current_configuration block.
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.1.1.5.12.5,BLADETYPE4-NETWORK-MIB::agNewCfgSyslogTrapMgmt,INTEGER,read-write,,current,enabled(1):disabled(2),Enable or disable management(flash, config, login) syslog and SNMP  trap, in the new_configuration block.
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.1.1.5.12.6,BLADETYPE4-NETWORK-MIB::agCurCfgSyslogTrapMgmt,INTEGER,read-only,,current,enabled(1):disabled(2),Enable or disable management(flash, config, login) syslog and SNMP  trap, as currently configured in the current_configuration block.
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.1.1.5.12.7,BLADETYPE4-NETWORK-MIB::agNewCfgSyslogTrapCli,INTEGER,read-write,,current,enabled(1):disabled(2),Enable or disable CLI generated error syslog and SNMP trap, in the 
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.1.1.5.12.8,BLADETYPE4-NETWORK-MIB::agCurCfgSyslogTrapCli,INTEGER,read-only,,current,enabled(1):disabled(2),Enable or disable CLI generated error syslog and SNMP trap, as  currently configured in the current_configuration block.
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.1.1.5.12.9,BLADETYPE4-NETWORK-MIB::agNewCfgSyslogTrapStg,INTEGER,read-write,,current,enabled(1):disabled(2),Enable or disable spanning tree syslog and SNMP trap, in the  new_configuration block.
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.1.1.5.12.10,BLADETYPE4-NETWORK-MIB::agCurCfgSyslogTrapStg,INTEGER,read-only,,current,enabled(1):disabled(2),Enable or disable spanning tree syslog and SNMP trap, as currently  configured in the current_configuration block.
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.1.1.5.12.11,BLADETYPE4-NETWORK-MIB::agNewCfgSyslogTrapVlan,INTEGER,read-write,,current,enabled(1):disabled(2),Enable or disable VLAN syslog and SNMP trap, in the new_configuration block.
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.1.1.5.12.12,BLADETYPE4-NETWORK-MIB::agCurCfgSyslogTrapVlan,INTEGER,read-only,,current,enabled(1):disabled(2),Enable or disable VLAN syslog and SNMP trap, as currently configured  in the current_configuration block.
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.1.1.5.12.19,BLADETYPE4-NETWORK-MIB::agNewCfgSyslogTrapSsh,INTEGER,read-write,,current,enabled(1):disabled(2),Enable or disable SSH, RADIUS syslog and SNMP trap, in the  new_configuration block.
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.1.1.5.12.20,BLADETYPE4-NETWORK-MIB::agCurCfgSyslogTrapSsh,INTEGER,read-only,,current,enabled(1):disabled(2),Enable or disable SSH, RADIUS syslog and SNMP trap, as currently  configured in the current_configuration block.
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.1.1.5.12.21,BLADETYPE4-NETWORK-MIB::agNewCfgSyslogTrapVrrp,INTEGER,read-write,,current,enabled(1):disabled(2),Enable or disable VRRP syslog and SNMP trap, in the new_configuration block.
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.1.1.5.12.22,BLADETYPE4-NETWORK-MIB::agCurCfgSyslogTrapVrrp,INTEGER,read-only,,current,enabled(1):disabled(2),Enable or disable VRRP syslog and SNMP trap, as currently configured  in the current_configuration block.
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.1.1.5.12.25,BLADETYPE4-NETWORK-MIB::agNewCfgSyslogTrapNtp,INTEGER,read-write,,current,enabled(1):disabled(2),Enable or disable NTP syslog and SNMP trap, in the new_configuration  block.
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.1.1.5.12.26,BLADETYPE4-NETWORK-MIB::agCurCfgSyslogTrapNtp,INTEGER,read-only,,current,enabled(1):disabled(2),Enable or disable NTP syslog and SNMP trap, as currently configured  in the current_configuration block.
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.1.1.5.12.31,BLADETYPE4-NETWORK-MIB::agNewCfgSyslogTrapIp,INTEGER,read-write,,current,enabled(1):disabled(2),Enable or disable IP related syslog and SNMP trap, in the  new_configuration block.
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.1.1.5.12.32,BLADETYPE4-NETWORK-MIB::agCurCfgSyslogTrapIp,INTEGER,read-only,,current,enabled(1):disabled(2),Enable or disable IP related syslog and SNMP trap, as currently  configured in the current_configuration block.
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.1.1.5.12.35,BLADETYPE4-NETWORK-MIB::agNewCfgSyslogTrapWeb,INTEGER,read-write,,current,enabled(1):disabled(2),Enable or disable WEBUI related syslog and SNMP trap, in the  new_configuration block.
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.1.1.5.12.36,BLADETYPE4-NETWORK-MIB::agCurCfgSyslogTrapWeb,INTEGER,read-only,,current,enabled(1):disabled(2),Enable or disable WEBUI related syslog and SNMP trap, as currently  configured in the current_configuration block.
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.1.1.5.12.41,BLADETYPE4-NETWORK-MIB::agNewCfgSyslogTrapOspf,INTEGER,read-write,,current,enabled(1):disabled(2),Enable or disable OSPF related syslog and SNMP trap,  in the new_configuration block.
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.1.1.5.12.42,BLADETYPE4-NETWORK-MIB::agCurCfgSyslogTrapOspf,INTEGER,read-only,,current,enabled(1):disabled(2),Enable or disable OSPF related syslog and SNMP trap, as currently configured in the current_configuration block.
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.1.1.5.12.45,BLADETYPE4-NETWORK-MIB::agNewCfgSyslogTrapRmon,INTEGER,read-write,,current,enabled(1):disabled(2),Enable or disable rmon related syslog and SNMP trap, in the new_configuration block.
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.1.1.5.12.46,BLADETYPE4-NETWORK-MIB::agCurCfgSyslogTrapRmon,INTEGER,read-only,,current,enabled(1):disabled(2),Enable or disable rmon related syslog and SNMP trap, as currently configured in the current_configuration block.
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.1.1.5.12.47,BLADETYPE4-NETWORK-MIB::agNewCfgSyslogTrapUfd,INTEGER,read-write,,current,enabled(1):disabled(2),Enable or disable UFD related syslog and SNMP trap, in the  new_configuration block.
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.1.1.5.12.48,BLADETYPE4-NETWORK-MIB::agCurCfgSyslogTrapUfd,INTEGER,read-only,,current,enabled(1):disabled(2),Enable or disable UFD related syslog and SNMP trap, as currently configured in the current_configuration block.
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.1.1.5.12.49,BLADETYPE4-NETWORK-MIB::agNewCfgSyslogTrapCfg,INTEGER,read-write,,current,enabled(1):disabled(2),Enable or disable CFG related syslog and SNMP trap, in the new_configuration block.
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.1.1.5.12.50,BLADETYPE4-NETWORK-MIB::agCurCfgSyslogTrapCfg,INTEGER,read-only,,current,enabled(1):disabled(2),Enable or disable CFG related syslog and SNMP trap, as currently configured in the current_configuration block.
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.1.1.5.12.51,BLADETYPE4-NETWORK-MIB::agNewCfgSyslogTrap8021x,INTEGER,read-write,,current,enabled(1):disabled(2),Enable or disable 802.1 related syslog and SNMP trap, in the new_configuration block.
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.1.1.5.12.52,BLADETYPE4-NETWORK-MIB::agCurCfgSyslogTrap8021x,INTEGER,read-only,,current,enabled(1):disabled(2),Enable or disable 802.1 related syslog and SNMP trap, in the new_configuration block.
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.1.1.5.12.55,BLADETYPE4-NETWORK-MIB::agNewCfgSyslogTrapAll,INTEGER,read-write,,current,enabled(1):disabled(2),Enable or disable all syslog and SNMP traps, in the  new_configuration block.
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.1.1.5.12.56,BLADETYPE4-NETWORK-MIB::agCurCfgSyslogTrapAll,INTEGER,read-only,,current,enabled(1):disabled(2),Enable or disable all syslog and SNMP traps, as currently  configured in the current_configuration block.
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.1.1.5.13,BLADETYPE4-NETWORK-MIB::agCurCfgSyslogSev,INTEGER,read-only,,current,emerg0(1):alert1(2):crit2(3):err3(4):warning4(5):notice5(6):info6(7):debug7(8),The severity of syslog host in the current configuration block.
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.1.1.5.14,BLADETYPE4-NETWORK-MIB::agNewCfgSyslogSev,INTEGER,read-write,,current,emerg0(1):alert1(2):crit2(3):err3(4):warning4(5):notice5(6):info6(7):debug7(8),The severity of syslog host in the new configuration block.
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.1.1.5.15,BLADETYPE4-NETWORK-MIB::agCurCfgSyslog2Sev,INTEGER,read-only,,current,emerg0(1):alert1(2):crit2(3):err3(4):warning4(5):notice5(6):info6(7):debug7(8),The severity of syslog2 host in the current configuration block.
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.1.1.5.16,BLADETYPE4-NETWORK-MIB::agNewCfgSyslog2Sev,INTEGER,read-write,,current,emerg0(1):alert1(2):crit2(3):err3(4):warning4(5):notice5(6):info6(7):debug7(8),The severity of syslogs host in the new configuration block.
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.1.1.7,BLADETYPE4-NETWORK-MIB::agTransfer,,,,,,
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.1.1.7.1,BLADETYPE4-NETWORK-MIB::agTransferServer,OCTET,read-write,,current,,The FTP/TFTP server IP address or domain name.
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.1.1.7.2,BLADETYPE4-NETWORK-MIB::agTransferImage,INTEGER,read-write,,current,image1(2):image2(3):boot(4),Whether the image file should be loaded in image1 or image2 or boot in flash.
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.1.1.7.3,BLADETYPE4-NETWORK-MIB::agTransferImageFileName,OCTET,read-write,,current,,The image file name to be downloaded.
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.1.1.7.4,BLADETYPE4-NETWORK-MIB::agTransferCfgFileName,OCTET,read-write,,current,,The configuration file name.
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.1.1.7.5,BLADETYPE4-NETWORK-MIB::agTransferDumpFileName,OCTET,read-write,,current,,The core dump file name.
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.1.1.7.6,BLADETYPE4-NETWORK-MIB::agTransferAction,INTEGER,read-write,,current,other(1):img-get(2):cfg-get(3):cfg-put(4):dump-put(5):img-put(7):tsdump-put(8),This is an action object to perform various FTP/TFTP Get or Put functions. The FTP/TFTP sever is specified in agTransferServer object. img-get(2) - Download switch image from a specified image file(agTransferImageFileName) on the FTP/TFTP server to the destinated storage(agTransferImage). cfg-get(3) - Download switch configuration from a specified file(agTransferCfgFileName) on the FTP/TFTP server. cfg-put(4) - Upload switch configuration to a specified file(agTransferCfgFileName) on the FTP/TFTP server. dump-put(5)- Download switch core dump to a specified file(agTransferDumpFileName) on the FTP/TFTP server. img-put(7) - Upload specified switch image to a specified image file(agTransferImageFileName) on the FTP/TFTP server. tsdump-put(5)- Download switch core dump to a specified file (agTransferTSDumpFileName) on the FTP/TFTP server. other(1) is returned always when read.
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.1.1.7.7,BLADETYPE4-NETWORK-MIB::agTransferLastActionStatus,OCTET,read-only,,current,,The recorded status of the previous FTP/TFTP activity.
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.1.1.7.9,BLADETYPE4-NETWORK-MIB::agTransferUserName,OCTET,read-write,,current,,The username for FTP server or blank for TFTP server.
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.1.1.7.10,BLADETYPE4-NETWORK-MIB::agTransferPassword,OCTET,read-write,,current,,The password for FTP server.
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.1.1.7.11,BLADETYPE4-NETWORK-MIB::agTransferTSDumpFileName,OCTET,read-write,,current,,The TS dump file name.
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.1.1.7.14,BLADETYPE4-NETWORK-MIB::agTransferLastConfigurationActionStatus,INTEGER,read-only,,current,successfully(1):failed(2),The status of the last configuration action using the file ftp/tftp'd from the server.
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.1.1.8,BLADETYPE4-NETWORK-MIB::agApply,,,,,,
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.1.1.8.1,BLADETYPE4-NETWORK-MIB::agApplyPending,INTEGER,read-only,,current,applyNeeded(2):noApplyNeeded(3),This object, when read, gives the user information whether an apply action is needed and that the configuration has been chaged by the user actions. The user then can apply the changes by setting proper value to the object agApplyConfiguration described above.
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.1.1.8.2,BLADETYPE4-NETWORK-MIB::agApplyConfig,INTEGER,read-write,,current,apply(1):idle(2):inprogress(3):complete(4):failed(5),When this object is read the current state is returned. idle(3) indicates that there is no apply in progess. complete(5) indicates that the last apply operation is completed. Setting the value to apply(1), will write all the changes made since the last apply to the current configuration block. 'complete' else it will return 'failed'. In case of failure, to read the reason for failure use the agApplyTable.
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.1.1.8.4,BLADETYPE4-NETWORK-MIB::agApplyTableSize,Integer32,read-only,,current,,The number of strings in the apply table.
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.1.1.8.5,BLADETYPE4-NETWORK-MIB::agApplyTable,,not-accessible,,current,,The table of URL path for URL load balancing in the current_config.
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.1.1.8.5.1,BLADETYPE4-NETWORK-MIB::agApplyTableEntry,,not-accessible,agApplyIndex,current,,Information about an URL path for URL load balancing.
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.1.1.8.5.1.1,BLADETYPE4-NETWORK-MIB::agApplyIndex,Integer32,read-only,,current,,The table index.
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.1.1.8.5.1.2,BLADETYPE4-NETWORK-MIB::agApplyString,OCTET,read-only,,current,,A string in the apply table.
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.1.1.10,BLADETYPE4-NETWORK-MIB::agTacacsConfig,,,,,,
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.1.1.10.1,BLADETYPE4-NETWORK-MIB::tacCurCfgPrimaryServer,IpAddress,read-only,,current,,The IP address of the Primary TACACS+ server.
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.1.1.10.2,BLADETYPE4-NETWORK-MIB::tacNewCfgPrimaryServer,IpAddress,read-write,,current,,The IP address of the Primary TACACS+ server.
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.1.1.10.3,BLADETYPE4-NETWORK-MIB::tacCurCfgSecondaryServer,IpAddress,read-only,,current,,The IP address of the Secondary TACACS+ server.
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.1.1.10.4,BLADETYPE4-NETWORK-MIB::tacNewCfgSecondaryServer,IpAddress,read-write,,current,,The IP address of the Secondary TACACS+ server.
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.1.1.10.5,BLADETYPE4-NETWORK-MIB::tacCurCfgPort,INTEGER,read-only,,current,,Specify the TACACS+ port number.
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.1.1.10.6,BLADETYPE4-NETWORK-MIB::tacNewCfgPort,INTEGER,read-write,,current,,Specify the TACACS+ port number.
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.1.1.10.7,BLADETYPE4-NETWORK-MIB::tacCurCfgTimeout,INTEGER,read-only,,current,,The maximum number of seconds before resending authentication to TACACS+ server.
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.1.1.10.8,BLADETYPE4-NETWORK-MIB::tacNewCfgTimeout,INTEGER,read-write,,current,,The maximum number of seconds before resending authentication to TACACS+ server.
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.1.1.10.9,BLADETYPE4-NETWORK-MIB::tacCurCfgRetries,INTEGER,read-only,,current,,Number of retries to the TACACS+ server.
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.1.1.10.10,BLADETYPE4-NETWORK-MIB::tacNewCfgRetries,INTEGER,read-write,,current,,Number of retries to the TACACS+ server.
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.1.1.10.11,BLADETYPE4-NETWORK-MIB::tacCurCfgState,INTEGER,read-only,,current,enabled(2):disabled(3),Enable or disable TACACS+ authentication.
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.1.1.10.12,BLADETYPE4-NETWORK-MIB::tacNewCfgState,INTEGER,read-write,,current,enabled(2):disabled(3),Enable or disable TACACS+ authentication.
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.1.1.10.13,BLADETYPE4-NETWORK-MIB::tacCurCfgAuthenString,OCTET,read-only,,current,,The TACACS+ authentication string.
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.1.1.10.14,BLADETYPE4-NETWORK-MIB::tacNewCfgAuthenString,OCTET,read-write,,current,,The TACACS+ authentication string.
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.1.1.10.15,BLADETYPE4-NETWORK-MIB::tacCurCfgBackdoor,INTEGER,read-only,,current,enabled(1):disabled(2),Enable or disable TACACS+ backdoor for telnet/ssh/http/https.
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.1.1.10.16,BLADETYPE4-NETWORK-MIB::tacNewCfgBackdoor,INTEGER,read-write,,current,enabled(1):disabled(2),Enable or disable TACACS+ backdoor for telnet/ssh/http/https.
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.1.1.10.17,BLADETYPE4-NETWORK-MIB::tacCurCfgAuthenSecondString,OCTET,read-only,,current,,The second TACACS+ authentication string.
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.1.1.10.18,BLADETYPE4-NETWORK-MIB::tacNewCfgAuthenSecondString,OCTET,read-write,,current,,The second TACACS+ authentication string.
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.1.1.10.19,BLADETYPE4-NETWORK-MIB::tacCurCfgCmdAuthor,INTEGER,read-only,,current,enabled(1):disabled(2),Enable or disable TACACS+ command authorization.
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.1.1.10.20,BLADETYPE4-NETWORK-MIB::tacNewCfgCmdAuthor,INTEGER,read-write,,current,enabled(1):disabled(2),Enable or disable TACACS+ command authorization.
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.1.1.10.21,BLADETYPE4-NETWORK-MIB::tacCurCfgCmdLogging,INTEGER,read-only,,current,enabled(1):disabled(2),Enable or disable TACACS+ command logging.
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.1.1.10.22,BLADETYPE4-NETWORK-MIB::tacNewCfgCmdLogging,INTEGER,read-write,,current,enabled(1):disabled(2),Enable or disable TACACS+ command logging.
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.1.1.10.23,BLADETYPE4-NETWORK-MIB::tacCurCfgSecBd,INTEGER,read-only,,current,enabled(1):disabled(2),Enable or disable TACACS+ secure backdoor for telnet.
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.1.1.10.24,BLADETYPE4-NETWORK-MIB::tacNewCfgSecBd,INTEGER,read-write,,current,enabled(1):disabled(2),Enable or disable TACACS+ secure backdoor for telnet.
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.1.1.10.25,BLADETYPE4-NETWORK-MIB::tacCurCfgCmap,INTEGER,read-only,,current,enabled(1):disabled(2),Enable/Disable Tacacs+ new prividlege level maping.
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.1.1.10.26,BLADETYPE4-NETWORK-MIB::tacNewCfgCmap,INTEGER,read-write,,current,enabled(1):disabled(2),Enable/Disable Tacacs+ new prividlege level maping.
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.1.1.10.31,BLADETYPE4-NETWORK-MIB::agTacacsUserMapCurCfgTable,,not-accessible,,current,,The table of tacacs+ user map current configuration.
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.1.1.10.31.1,BLADETYPE4-NETWORK-MIB::agTacacsUserMapCurCfgTableEntry,,not-accessible,agTacacsUserMapCurCfgUId,current,,A row in the tacacs+ user mapping table.
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.1.1.10.31.1.1,BLADETYPE4-NETWORK-MIB::agTacacsUserMapCurCfgUId,Integer32,read-only,,current,,The current config remote privilege identifier. The identifier value corresponds to the remote privilege.
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.1.1.10.31.1.2,BLADETYPE4-NETWORK-MIB::agTacacsUserMapCurCfgMapping,INTEGER,read-only,,current,none(0):user(1):oper(2):admin(3),Current Tacacs+ user privilege mappings. The correspondence between the local privilege and the remote privilege is: - The remote privilege is the privilege identifier value - The local privilege is the mapped value(user, oper, admin) Example: For the remote privilege 15, we have the index 16: agTacacsUserMapCurCfgUId.16 = 15.
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.1.1.10.32,BLADETYPE4-NETWORK-MIB::agTacacsUserMapNewCfgTable,,not-accessible,,current,,The table of tacacs+ user map new configuration.
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.1.1.10.32.1,BLADETYPE4-NETWORK-MIB::agTacacsUserMapNewCfgTableEntry,,not-accessible,agTacacsUserMapNewCfgUId,current,,A row in the tacacs+ user mapping table.
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.1.1.10.32.1.1,BLADETYPE4-NETWORK-MIB::agTacacsUserMapNewCfgUId,Integer32,read-only,,current,,The new config remote privilege identifier. The identifier value corresponds to the remote privilege.
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.1.1.10.32.1.2,BLADETYPE4-NETWORK-MIB::agTacacsUserMapNewCfgMapping,INTEGER,read-create,,current,none(0):user(1):oper(2):admin(3),Set new Tacacs+ user privilege mappings. The correspondence between the local privilege and the remote privilege is: - The remote privilege is the privilege identifier value - The local privilege is the mapped value(user, oper, admin) Example: For the remote privilege 15, we have the index 16: agTacacsUserMapNewCfgUId.16 = 15.
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.1.1.10.33,BLADETYPE4-NETWORK-MIB::tacNewCfgDirectedRequest,INTEGER,read-write,,current,disabled(1):restricted(2):no-truncate(3),Enable/Disable tacacs directed request.
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.1.1.10.34,BLADETYPE4-NETWORK-MIB::tacCurCfgDirectedRequest,INTEGER,read-only,,current,disabled(1):restricted(2):no-truncate(3),The current tacacs directed request state.
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.1.1.11,BLADETYPE4-NETWORK-MIB::agMgmtNetConfig,,,,,,
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.1.1.11.1,BLADETYPE4-NETWORK-MIB::agMgmtNetTableMaxSize,Integer32,read-only,,current,,The maximum number of entries in the Management Network Table.
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.1.1.11.2,BLADETYPE4-NETWORK-MIB::agCurCfgMgmtNetTable,,not-accessible,,current,,The table for Management Network definitions in the current configuration block.
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.1.1.11.2.1,BLADETYPE4-NETWORK-MIB::agCurCfgMgmtNetEntry,,not-accessible,agCurCfgMgmtNetIndex,current,,A row in the management network definition table.
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.1.1.11.2.1.1,BLADETYPE4-NETWORK-MIB::agCurCfgMgmtNetIndex,Integer32,read-only,,current,,The index of the Management Network Definition table.
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.1.1.11.2.1.2,BLADETYPE4-NETWORK-MIB::agCurCfgMgmtNetSubnet,IpAddress,read-only,,current,,The Management Network Address in the current_configuration block.
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.1.1.11.2.1.3,BLADETYPE4-NETWORK-MIB::agCurCfgMgmtNetMask,IpAddress,read-only,,current,,The Management Network Mask in the current_configuration block.
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.1.1.11.3,BLADETYPE4-NETWORK-MIB::agNewCfgMgmtNetTable,,not-accessible,,current,,The table for Management Network definitions in the new configuration block.
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.1.1.11.3.1,BLADETYPE4-NETWORK-MIB::agNewCfgMgmtNetEntry,,not-accessible,agNewCfgMgmtNetIndex,current,,A row in the management network definition table.
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.1.1.11.3.1.1,BLADETYPE4-NETWORK-MIB::agNewCfgMgmtNetIndex,Integer32,read-only,,current,,The index of the Management Network Definition table.
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.1.1.11.3.1.2,BLADETYPE4-NETWORK-MIB::agNewCfgMgmtNetSubnet,IpAddress,read-create,,current,,The Management Network Address in the new_configuration block.
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.1.1.11.3.1.3,BLADETYPE4-NETWORK-MIB::agNewCfgMgmtNetMask,IpAddress,read-create,,current,,The Management Network Mask in the new_configuration block.
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.1.1.11.3.1.4,BLADETYPE4-NETWORK-MIB::agNewCfgMgmtNetDelete,INTEGER,read-create,,current,other(1):delete(2),By setting the value to delete(2), the entire row is deleted.
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.1.1.11.4,BLADETYPE4-NETWORK-MIB::agMgmtNetClear,INTEGER,read-write,,current,other(1):clear(2),By setting the value to delete(2), the entire table is cleared.
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.1.1.12,BLADETYPE4-NETWORK-MIB::agAccess,,,,,,
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.1.1.12.1,BLADETYPE4-NETWORK-MIB::agAccessUserMaxUserID,Integer32,read-only,,current,,The maximum number of Users ID.
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.1.1.12.2,BLADETYPE4-NETWORK-MIB::agAccessUserCurCfgTable,,not-accessible,,current,,The table of Access user configuration.
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.1.1.12.2.1,BLADETYPE4-NETWORK-MIB::agAccessUserCurCfgTableEntry,,not-accessible,agAccessUserCurCfgUId,current,,A row in the Access user configuration table.
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.1.1.12.2.1.1,BLADETYPE4-NETWORK-MIB::agAccessUserCurCfgUId,Integer32,read-only,,current,,The User identifier.
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.1.1.12.2.1.2,BLADETYPE4-NETWORK-MIB::agAccessUserCurCos,INTEGER,read-only,,current,user(0):oper(3):admin(6),The user class of service.
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.1.1.12.2.1.3,BLADETYPE4-NETWORK-MIB::agAccessUserCurCfgName,OCTET,read-only,,current,,The user name.
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.1.1.12.2.1.4,BLADETYPE4-NETWORK-MIB::agAccessUserCurCfgPswd,OCTET,read-only,,current,,The character string representing the user passworde.
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.1.1.12.2.1.5,BLADETYPE4-NETWORK-MIB::agAccessUserCurCfgState,INTEGER,read-only,,current,enabled(2):disabled(3),Enable or disable a user.
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.1.1.12.3,BLADETYPE4-NETWORK-MIB::agAccessUserNewCfgTable,,not-accessible,,current,,The table of Access user configuration.
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.1.1.12.3.1,BLADETYPE4-NETWORK-MIB::agAccessUserNewCfgTableEntry,,not-accessible,agAccessUserNewCfgUId,current,,A row in the Access user configuration table.
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.1.1.12.3.1.1,BLADETYPE4-NETWORK-MIB::agAccessUserNewCfgUId,Integer32,read-only,,current,,The User identifier.
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.1.1.12.3.1.2,BLADETYPE4-NETWORK-MIB::agAccessUserNewCos,INTEGER,read-create,,current,user(0):oper(3):admin(6),The user class of service.
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.1.1.12.3.1.3,BLADETYPE4-NETWORK-MIB::agAccessUserNewCfgName,OCTET,read-create,,current,,The user name.
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.1.1.12.3.1.4,BLADETYPE4-NETWORK-MIB::agAccessUserNewCfgPswd,OCTET,read-create,,current,,The character string representing the user passworde.
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.1.1.12.3.1.5,BLADETYPE4-NETWORK-MIB::agAccessUserNewCfgState,INTEGER,read-create,,current,enabled(2):disabled(3),Enable or disable a user.
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.1.1.12.3.1.6,BLADETYPE4-NETWORK-MIB::agAccessUserNewCfgDelete,INTEGER,read-create,,current,other(1):delete(2),This is an action object to create or delete a User. other(1) is returned always when read. The following values are writable: delete(2)...to delete a User
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.1.1.13,BLADETYPE4-NETWORK-MIB::agSSHConfig,,,,,,
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.1.1.13.1,BLADETYPE4-NETWORK-MIB::sshCurCfgIntrval,INTEGER,read-only,,current,,Interval for generating the RSA server key.
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.1.1.13.2,BLADETYPE4-NETWORK-MIB::sshNewCfgIntrval,INTEGER,read-write,,current,,Set Interval for generating the RSA server key.
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.1.1.13.3,BLADETYPE4-NETWORK-MIB::sshCurCfgScpAdm,OCTET,read-only,,current,,SCP-only admin password.
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.1.1.13.4,BLADETYPE4-NETWORK-MIB::sshNewCfgScpAdm,OCTET,read-write,,current,,Set SCP-only admin password.
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.1.1.13.5,BLADETYPE4-NETWORK-MIB::sshNewCfgHKeyGen,INTEGER,read-write,,current,generate(1):other(2),This is an action object to generate the RSA host key. other(2) is returned always when read. The following values are writable: generate(1).. Generate the RSA host key.
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.1.1.13.6,BLADETYPE4-NETWORK-MIB::sshNewCfgSKeyGen,INTEGER,read-write,,current,generate(1):other(2),This is an action object to generate the RSA server key. other(2) is returned always when read. The following values are writable: generate(1).. Generate the RSA server key.
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.1.1.13.7,BLADETYPE4-NETWORK-MIB::sshCurCfgSSHPort,INTEGER,read-only,,current,,SSH server port number.
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.1.1.13.8,BLADETYPE4-NETWORK-MIB::sshNewCfgSSHPort,INTEGER,read-write,,current,,Set SSH server port number.
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.1.1.13.9,BLADETYPE4-NETWORK-MIB::sshCurCfgScpApplySave,INTEGER,read-only,,current,enabled(1):disabled(2),SCP apply and save.
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.1.1.13.10,BLADETYPE4-NETWORK-MIB::sshNewCfgScpApplySave,INTEGER,read-write,,current,enabled(1):disabled(2),Enable/Disable the SCP apply and save.
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.1.1.13.11,BLADETYPE4-NETWORK-MIB::sshCurCfgStatus,INTEGER,read-only,,current,on(1):off(2),SSH server status.
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.1.1.13.12,BLADETYPE4-NETWORK-MIB::sshNewCfgStatus,INTEGER,read-write,,current,on(1):off(2),Turn SSH server ON/OFF.
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.1.1.13.13,BLADETYPE4-NETWORK-MIB::sshCurVersion1Support,INTEGER,read-only,,current,enabled(1):disabled(2),Indicates whether the SSH version1 is supported or not.
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.1.1.13.14,BLADETYPE4-NETWORK-MIB::sshNewVersion1Support,INTEGER,read-write,,current,enable(1):disable(2),Enable/Disable the SSH version1 support
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.1.2,BLADETYPE4-NETWORK-MIB::agentStats,,,,,,
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.1.2.1,BLADETYPE4-NETWORK-MIB::pktStats,,,,,,
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.1.2.1.1,BLADETYPE4-NETWORK-MIB::pktStatsAllocs,Counter32,read-only,,current,,Total number of packet allocations from the packet buffer pool by  the TCP/IP protocol stack.
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.1.2.1.2,BLADETYPE4-NETWORK-MIB::pktStatsFrees,Counter32,read-only,,current,,Total number of times the packet buffers are freed(released) to the packet buffer pool by the TCP/IP protocol stack.
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.1.2.1.3,BLADETYPE4-NETWORK-MIB::pktStatsAllocFails,Counter32,read-only,,current,,Total number of packet allocation failures from the packet buffer  pool by the TCP/IP protocol stack.
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.1.2.1.4,BLADETYPE4-NETWORK-MIB::pktStatsMediums,Gauge32,read-only,,current,,Total number of packet allocations with size greater than 128 bytes and less than or equal to 1536 bytes from the packet buffer pool by  the TCP/IP protocol stack.
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.1.2.1.5,BLADETYPE4-NETWORK-MIB::pktStatsJumbos,Gauge32,read-only,,current,,Total number of packet allocations with size larger than 1536 bytes  from the packet buffer pool by the TCP/IP protocol stack.
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.1.2.1.6,BLADETYPE4-NETWORK-MIB::pktStatsSmalls,Gauge32,read-only,,current,,Total number of packet allocations with size less than or eqaul to  128 bytes from the packet buffer pool by the TCP/IP protocol stack.
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.1.2.1.7,BLADETYPE4-NETWORK-MIB::pktStatsMediumsHiWatermark,Counter32,read-only,,current,,The highest number of packet allocations with size greater than  128 bytes and less than or equal to 1536 bytes from the packet  buffer pool by the TCP/IP protocol stack.
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.1.2.1.8,BLADETYPE4-NETWORK-MIB::pktStatsJumbosHiWatermark,Counter32,read-only,,current,,The highest number of packet allocations with size larger than  1536 bytes from the packet buffer pool by the TCP/IP protocol stack.
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.1.2.1.9,BLADETYPE4-NETWORK-MIB::pktStatsSmallsHiWatermark,Counter32,read-only,,current,,The highest number of packet allocations with size less than or  eqaul to 128 bytes from the packet buffer pool by the TCP/IP  protocol stack.
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.1.2.2,BLADETYPE4-NETWORK-MIB::mpCpuStats,,,,,,
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.1.2.2.1,BLADETYPE4-NETWORK-MIB::mpCpuStatsUtil1Second,Integer32,read-only,,current,,The utilization of MP CPU over 1 second. It shows the percentage.
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.1.2.2.2,BLADETYPE4-NETWORK-MIB::mpCpuStatsUtil4Seconds,Integer32,read-only,,current,,The utilization of MP CPU over 4 seconds. 
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.1.2.2.3,BLADETYPE4-NETWORK-MIB::mpCpuStatsUtil64Seconds,Integer32,read-only,,current,,The utilization of MP CPU over 64 seconds. 
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.1.2.3,BLADETYPE4-NETWORK-MIB::portStats,,,,,,
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.1.2.3.1,BLADETYPE4-NETWORK-MIB::portStatsTable,,not-accessible,,current,,The table of port statistics.
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.1.2.3.1.1,BLADETYPE4-NETWORK-MIB::portStatsTableEntry,,not-accessible,portStatsIndx,current,,A row in the port stats table.
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.1.2.3.1.1.1,BLADETYPE4-NETWORK-MIB::portStatsIndx,Unsigned32,read-only,,current,,The port index.
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.1.2.3.1.1.2,BLADETYPE4-NETWORK-MIB::portStatsPhyIfInOctets,Counter32,read-only,,current,,The total number of octets received on the
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.1.2.3.1.1.3,BLADETYPE4-NETWORK-MIB::portStatsPhyIfInUcastPkts,Counter32,read-only,,current,,The number of subnetwork-unicast packets
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.1.2.3.1.1.4,BLADETYPE4-NETWORK-MIB::portStatsPhyIfInNUcastPkts,Counter32,read-only,,current,,The number of non-unicast (i.e., subnetwork-
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.1.2.3.1.1.5,BLADETYPE4-NETWORK-MIB::portStatsPhyIfInDiscards,Counter32,read-only,,current,,The number of inbound packets which were chosen
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.1.2.3.1.1.6,BLADETYPE4-NETWORK-MIB::portStatsPhyIfInErrors,Counter32,read-only,,current,,The number of inbound packets that contained
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.1.2.3.1.1.7,BLADETYPE4-NETWORK-MIB::portStatsPhyIfInUnknownProtos,Counter32,read-only,,current,,The number of packets received via the interface
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.1.2.3.1.1.8,BLADETYPE4-NETWORK-MIB::portStatsPhyIfOutOctets,Counter32,read-only,,current,,The total number of octets transmitted out of the
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.1.2.3.1.1.9,BLADETYPE4-NETWORK-MIB::portStatsPhyIfOutUcastPkts,Counter32,read-only,,current,,The total number of packets that higher-level
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.1.2.3.1.1.10,BLADETYPE4-NETWORK-MIB::portStatsPhyIfOutNUcastPkts,Counter32,read-only,,current,,The total number of packets that higher-level
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.1.2.3.1.1.11,BLADETYPE4-NETWORK-MIB::portStatsPhyIfOutDiscards,Counter32,read-only,,current,,The number of outbound packets which were chosen
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.1.2.3.1.1.12,BLADETYPE4-NETWORK-MIB::portStatsPhyIfOutErrors,Counter32,read-only,,current,,The number of outbound packets that could not be
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.1.2.3.1.1.13,BLADETYPE4-NETWORK-MIB::portStatsPhyIfOutQLen,Gauge32,read-only,,current,,The length of the output packet queue (in
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.1.2.3.1.1.14,BLADETYPE4-NETWORK-MIB::portStatsPhyIfInBroadcastPkts,Counter32,read-only,,current,,The number of packets, delivered by this sub-layer to a higher (sub-)layer, which were addressed to a broadcast address at this sub-layer.
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.1.2.3.1.1.15,BLADETYPE4-NETWORK-MIB::portStatsPhyIfOutBroadcastPkts,Counter32,read-only,,current,,The total number of packets that higher-level protocols requested be transmitted, and which were addressed to a broadcast address at this sub-layer, including those that were discarded or not sent.
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.1.2.3.1.1.16,BLADETYPE4-NETWORK-MIB::portStatsClear,INTEGER,read-write,,current,clear(1):ok(2),Setting this value to clear(1) clears the stats for this port.
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.1.2.3.1.1.17,BLADETYPE4-NETWORK-MIB::portStatsPhyIfInMulticastPkts,Counter32,read-only,,current,,The number of packets, delivered by this sub-layer to a higher (sub-)layer, which were addressed to a multicast address at this sub-layer.
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.1.2.3.1.1.18,BLADETYPE4-NETWORK-MIB::portStatsPhyIfOutMulticastPkts,Counter32,read-only,,current,,The total number of packets that higher-level protocols requested be transmitted, and which were addressed to a multicast address at this sub-layer, including those that were discarded or not sent.
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.1.2.3.1.1.20,BLADETYPE4-NETWORK-MIB::portStatsLinkStateChange,Counter32,read-only,,current,,Number of link state changes.
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.1.2.3.1.1.21,BLADETYPE4-NETWORK-MIB::portStatsPhyIfInFctlPkts,Counter32,read-only,,current,,The number of inbound flow control packets.
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.1.2.3.1.1.22,BLADETYPE4-NETWORK-MIB::portStatsPhyIfOutFctlPkts,Counter32,read-only,,current,,The number of outbound flow control packets.
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.1.2.3.2,BLADETYPE4-NETWORK-MIB::dot1xPortStatsTable,,not-accessible,,current,,The table of 802.1x port statistics.
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.1.2.3.2.1,BLADETYPE4-NETWORK-MIB::dot1xPortStatsTableEntry,,not-accessible,dot1xPortStatsIndx,current,,A row in the 802.1x port stats table.
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.1.2.3.2.1.1,BLADETYPE4-NETWORK-MIB::dot1xPortStatsIndx,Unsigned32,read-only,,current,,The 802.1x port stats index.
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.1.2.3.2.1.2,BLADETYPE4-NETWORK-MIB::eapolFramesRx,Integer32,read-only,,current,,
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.1.2.3.2.1.3,BLADETYPE4-NETWORK-MIB::eapolFramesTx,Integer32,read-only,,current,,
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.1.2.3.2.1.4,BLADETYPE4-NETWORK-MIB::eapolStartFramesRx,Integer32,read-only,,current,,
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.1.2.3.2.1.5,BLADETYPE4-NETWORK-MIB::eapolLogoffFramesRx,Integer32,read-only,,current,,
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.1.2.3.2.1.6,BLADETYPE4-NETWORK-MIB::eapolRespIdFramesRx,Integer32,read-only,,current,,
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.1.2.3.2.1.7,BLADETYPE4-NETWORK-MIB::eapolRespFramesRx,Integer32,read-only,,current,,
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.1.2.3.2.1.8,BLADETYPE4-NETWORK-MIB::eapolReqIdFramesTx,Integer32,read-only,,current,,
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.1.2.3.2.1.9,BLADETYPE4-NETWORK-MIB::eapolReqFramesTx,Integer32,read-only,,current,,
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.1.2.3.2.1.10,BLADETYPE4-NETWORK-MIB::invalidEapolFramesRx,Integer32,read-only,,current,,
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.1.2.3.2.1.11,BLADETYPE4-NETWORK-MIB::eapLengthErrorFramesRx,Integer32,read-only,,current,,
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.1.2.3.2.1.12,BLADETYPE4-NETWORK-MIB::authEntersConnecting,Integer32,read-only,,current,,
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.1.2.3.2.1.13,BLADETYPE4-NETWORK-MIB::authEapLogoffsWhileConnecting,Integer32,read-only,,current,,
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.1.2.3.2.1.14,BLADETYPE4-NETWORK-MIB::authEntersAuthenticating,Integer32,read-only,,current,,
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.1.2.3.2.1.15,BLADETYPE4-NETWORK-MIB::authSuccessesWhileAuthenticating,Integer32,read-only,,current,,
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.1.2.3.2.1.16,BLADETYPE4-NETWORK-MIB::authTimeoutsWhileAuthenticating,Integer32,read-only,,current,,
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.1.2.3.2.1.17,BLADETYPE4-NETWORK-MIB::authFailWhileAuthenticating,Integer32,read-only,,current,,
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.1.2.3.2.1.18,BLADETYPE4-NETWORK-MIB::authReauthsWhileAuthenticating,Integer32,read-only,,current,,
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.1.2.3.2.1.19,BLADETYPE4-NETWORK-MIB::authEapStartsWhileAuthenticating,Integer32,read-only,,current,,
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.1.2.3.2.1.20,BLADETYPE4-NETWORK-MIB::authEapLogoffWhileAuthenticating,Integer32,read-only,,current,,
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.1.2.3.2.1.21,BLADETYPE4-NETWORK-MIB::authReauthsWhileAuthenticated,Integer32,read-only,,current,,
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.1.2.3.2.1.22,BLADETYPE4-NETWORK-MIB::authEapStartsWhileAuthenticated,Integer32,read-only,,current,,
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.1.2.3.2.1.23,BLADETYPE4-NETWORK-MIB::authEapLogoffWhileAuthenticated,Integer32,read-only,,current,,
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.1.2.3.2.1.24,BLADETYPE4-NETWORK-MIB::backendResponses,Integer32,read-only,,current,,
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.1.2.3.2.1.25,BLADETYPE4-NETWORK-MIB::backendAccessChallenges,Integer32,read-only,,current,,
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.1.2.3.2.1.26,BLADETYPE4-NETWORK-MIB::backendOtherRequestsToSupplicant,Integer32,read-only,,current,,
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.1.2.3.2.1.27,BLADETYPE4-NETWORK-MIB::backendNonNakResponsesFromSupplicant,Integer32,read-only,,current,,
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.1.2.3.2.1.28,BLADETYPE4-NETWORK-MIB::backendAuthSuccesses,Integer32,read-only,,current,,
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.1.2.3.2.1.29,BLADETYPE4-NETWORK-MIB::backendAuthFails,Integer32,read-only,,current,,
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.1.2.3.2.1.30,BLADETYPE4-NETWORK-MIB::lastEapolFrameVersion,Integer32,read-only,,current,,
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.1.2.3.2.1.31,BLADETYPE4-NETWORK-MIB::lastEapolFrameSource,OCTET,read-only,,current,,
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.1.2.3.3,BLADETYPE4-NETWORK-MIB::allportsStatsTable,,not-accessible,,current,,The table of all ports statistics.
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.1.2.3.3.1,BLADETYPE4-NETWORK-MIB::allportsStatsTableEntry,,not-accessible,allportsStatsIndx,current,,A row in the table of all ports statistics.
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.1.2.3.3.1.1,BLADETYPE4-NETWORK-MIB::allportsStatsIndx,Unsigned32,read-only,,current,,The port number.
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.1.2.3.3.1.2,BLADETYPE4-NETWORK-MIB::allportsStatsDescr,OCTET,read-only,,current,,The port description.
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.1.2.3.3.1.3,BLADETYPE4-NETWORK-MIB::allportsStatsSpeed,INTEGER,read-only,,current,mbs10(2):mbs100(3):mbs1000(4):any(5),The current operational speed of the port.
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.1.2.3.3.1.4,BLADETYPE4-NETWORK-MIB::allportsStatsPhysAddress,OCTET,read-only,,current,,The port MAC Address.
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.1.2.3.3.1.5,BLADETYPE4-NETWORK-MIB::allportsStatsAdminStatus,INTEGER,read-only,,current,up(1):down(2):testing(3),The port Admin state.
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.1.2.3.3.1.6,BLADETYPE4-NETWORK-MIB::allportsStatsOperStatus,INTEGER,read-only,,current,up(1):down(2):testing(3),The port Operational Status.
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.1.2.3.3.1.7,BLADETYPE4-NETWORK-MIB::allportsStatsInOctets,Counter32,read-only,,current,,Octets In for port.
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.1.2.3.3.1.8,BLADETYPE4-NETWORK-MIB::allportsStatsOutOctets,Counter32,read-only,,current,,Octets Out for port.
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.1.2.3.3.1.9,BLADETYPE4-NETWORK-MIB::allportsStatsInPkts,Counter32,read-only,,current,,Packets In for port.
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.1.2.3.3.1.10,BLADETYPE4-NETWORK-MIB::allportsStatsOutPkts,Counter32,read-only,,current,,Packets Out for port.
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.1.2.3.3.1.11,BLADETYPE4-NETWORK-MIB::allportsStatsInUcast,OCTET,read-only,,current,,Unicast Packets In for port.
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.1.2.3.3.1.12,BLADETYPE4-NETWORK-MIB::allportsStatsOutUcast,OCTET,read-only,,current,,Unicast Packets Out for port.
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.1.2.3.3.1.13,BLADETYPE4-NETWORK-MIB::allportsStatsInBcast,OCTET,read-only,,current,,Broadcasts Packets In for port.
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.1.2.3.3.1.14,BLADETYPE4-NETWORK-MIB::allportsStatsOutBcast,OCTET,read-only,,current,,Broadcasts Packets Out for port.
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.1.2.3.3.1.15,BLADETYPE4-NETWORK-MIB::allportsStatsInMcast,OCTET,read-only,,current,,Multicast Packets In for port.
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.1.2.3.3.1.16,BLADETYPE4-NETWORK-MIB::allportsStatsOutMcast,OCTET,read-only,,current,,Multicast Packets Out for port.
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.1.2.3.3.1.17,BLADETYPE4-NETWORK-MIB::allportsStatsInDiscards,Counter32,read-only,,current,,Discarded Packets for port.
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.1.2.3.3.1.18,BLADETYPE4-NETWORK-MIB::allportsStatsOutDiscards,Counter32,read-only,,current,,Outbound Packets for port.
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.1.2.3.3.1.19,BLADETYPE4-NETWORK-MIB::allportsStatsInErrors,Counter32,read-only,,current,,Error Packets for port.
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.1.2.3.3.1.20,BLADETYPE4-NETWORK-MIB::allportsStatsOutErrors,Counter32,read-only,,current,,Not sent packets due to error.
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.1.2.3.3.1.21,BLADETYPE4-NETWORK-MIB::allportsStatsInUnknownProtos,OCTET,read-only,,current,,Unknown protocol packets.
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.1.2.3.3.1.22,BLADETYPE4-NETWORK-MIB::allportsStatsOutQLen,OCTET,read-only,,current,,Outbound Packet Queue Length.
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.1.2.3.3.1.23,BLADETYPE4-NETWORK-MIB::allportsStatsipInReceives,Counter32,read-only,,current,,Ip In Receives.
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.1.2.3.3.1.24,BLADETYPE4-NETWORK-MIB::allportsStatsipInHeaderErrors,Counter32,read-only,,current,,Ip In Header Errors.
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.1.2.3.3.1.25,BLADETYPE4-NETWORK-MIB::allportsStatsipInDiscards,Counter32,read-only,,current,,Ip In Discards.
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.1.2.3.3.1.26,BLADETYPE4-NETWORK-MIB::allportsStatsLinkStateChange,Counter32,read-only,,current,,Number of link state changes.
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.1.2.3.5,BLADETYPE4-NETWORK-MIB::clearPortsStats,INTEGER,read-write,,current,ok(1):clear(2),Setting this to clear(2) results in clearing the statistics for all ports.
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.1.2.7,BLADETYPE4-NETWORK-MIB::agClearStats,,,,,,
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.1.2.7.1,BLADETYPE4-NETWORK-MIB::snmpClearStats,INTEGER,read-write,,current,ok(1):clear(2),Setting this to clear(2) results in clearing the SNMP statistics.
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.1.2.9,BLADETYPE4-NETWORK-MIB::ntpStats,,,,,,
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.1.2.9.1,BLADETYPE4-NETWORK-MIB::ntpPrimaryServerReqSent,Integer32,read-only,,current,,The total number of NTP requests sent to Primary NTP Server.
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.1.2.9.2,BLADETYPE4-NETWORK-MIB::ntpPrimaryServerRespRcvd,Integer32,read-only,,current,,The total number of NTP responces received from Primary NTP Server.
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.1.2.9.3,BLADETYPE4-NETWORK-MIB::ntpPrimaryServerUpdates,Integer32,read-only,,current,,The total number of NTP Updates by Primary NTP Server.
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.1.2.9.4,BLADETYPE4-NETWORK-MIB::ntpSecondaryServerReqSent,Integer32,read-only,,current,,The total number of NTP requests sent to Secondary NTP Server.
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.1.2.9.5,BLADETYPE4-NETWORK-MIB::ntpSecondaryServerRespRcvd,Integer32,read-only,,current,,The total number of NTP responces received from Secondary NTP Server.
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.1.2.9.6,BLADETYPE4-NETWORK-MIB::ntpSecondaryServerUpdates,Integer32,read-only,,current,,The total number of NTP Updates by Secondary NTP Server.
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.1.2.9.7,BLADETYPE4-NETWORK-MIB::ntpLastUpdateServer,INTEGER,read-only,,current,none(0):primary(1):secondary(2),The type of ntp server updated last time.
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.1.2.9.8,BLADETYPE4-NETWORK-MIB::ntpLastUpdateTime,OCTET,read-only,,current,,The last time updated by ntp server.
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.1.2.9.9,BLADETYPE4-NETWORK-MIB::ntpClearStats,INTEGER,read-write,,current,ok(1):clear(2),Setting this value to clear(2) clears the stats for ntp.
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.1.2.9.10,BLADETYPE4-NETWORK-MIB::ntpSystemCurrentTime,OCTET,read-only,,current,,The current system time.
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.1.2.12,BLADETYPE4-NETWORK-MIB::aclStats,,,,,,
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.1.2.12.1,BLADETYPE4-NETWORK-MIB::aclStatsTable,,not-accessible,,current,,The table of ACL statistics.
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.1.2.12.1.1,BLADETYPE4-NETWORK-MIB::aclStatsTableEntry,,not-accessible,aclStatsIndex,current,,Statistics about a particular ACL configuration entry.
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.1.2.12.1.1.1,BLADETYPE4-NETWORK-MIB::aclStatsIndex,Integer32,read-only,,current,,The acl index.
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.1.2.12.1.1.2,BLADETYPE4-NETWORK-MIB::aclStatsHits,Counter32,read-only,,current,,Total number of hits for this ACL entry
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.1.2.12.1.1.3,BLADETYPE4-NETWORK-MIB::aclClearStats,INTEGER,read-write,,current,ok(1):clear(2),Setting this value to clear(2) clears the stats for the ACL.
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.1.2.13,BLADETYPE4-NETWORK-MIB::memoryStats,,,,,,
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.1.2.13.1,BLADETYPE4-NETWORK-MIB::totalMemoryStats,Integer32,read-only,,current,,The total memory in bytes.
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.1.2.13.2,BLADETYPE4-NETWORK-MIB::memoryFreeStats,Integer32,read-only,,current,,The free memory in bytes.
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.1.2.13.3,BLADETYPE4-NETWORK-MIB::memorySharedStats,Integer32,read-only,,current,,The shared memory in bytes.
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.1.2.13.4,BLADETYPE4-NETWORK-MIB::memoryBufferStats,Integer32,read-only,,current,,The buffer memory in bytes.
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.1.2.13.5,BLADETYPE4-NETWORK-MIB::swapTotalStats,Integer32,read-only,,current,,The total swap memory in bytes.
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.1.2.13.6,BLADETYPE4-NETWORK-MIB::swapFreeStats,Integer32,read-only,,current,,The free swap memory in bytes.
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.1.2.13.7,BLADETYPE4-NETWORK-MIB::highTotalStats,Integer32,read-only,,current,,The total high memory in bytes.
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.1.2.13.8,BLADETYPE4-NETWORK-MIB::highFreeStats,Integer32,read-only,,current,,The free high memory in bytes.
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.1.3,BLADETYPE4-NETWORK-MIB::agentInfo,,,,,,
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.1.3.1,BLADETYPE4-NETWORK-MIB::hardware,,,,,,
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.1.3.1.1,BLADETYPE4-NETWORK-MIB::hwPartNumber,OCTET,read-only,,current,,The hardware part number of the Bladetype2 Switch.
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.1.3.1.2,BLADETYPE4-NETWORK-MIB::hwRevision,OCTET,read-only,,current,,The hardware revision. If the revision is not
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.1.3.1.5,BLADETYPE4-NETWORK-MIB::hwSerialNumber,OCTET,read-only,,current,,The switch serial number.
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.1.3.2,BLADETYPE4-NETWORK-MIB::portInfo,,,,,,
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.1.3.2.1,BLADETYPE4-NETWORK-MIB::portInfoTable,,not-accessible,,current,,The table of port information.
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.1.3.2.1.1,BLADETYPE4-NETWORK-MIB::portInfoTableEntry,,not-accessible,portInfoIndx,current,,A row in the port information table.
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.1.3.2.1.1.1,BLADETYPE4-NETWORK-MIB::portInfoIndx,Unsigned32,read-only,,current,,The port index.
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.1.3.2.1.1.2,BLADETYPE4-NETWORK-MIB::portInfoSpeed,INTEGER,read-only,,current,mbs10(2):mbs100(3):mbs1000(4):any(5),The current operational speed of the port.
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.1.3.2.1.1.3,BLADETYPE4-NETWORK-MIB::portInfoMode,INTEGER,read-only,,current,full-duplex(2):half-duplex(3),The current operational mode of the port.
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.1.3.2.1.1.4,BLADETYPE4-NETWORK-MIB::portInfoFlowCtrl,INTEGER,read-only,,current,transmit(2):receive(3):both(4):none(5),The current operational flow control of the port.
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.1.3.2.1.1.5,BLADETYPE4-NETWORK-MIB::portInfoLink,INTEGER,read-only,,current,up(1):down(2):disabled(3):inoperative(4),The current operational link status of the port.
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.1.3.2.1.1.6,BLADETYPE4-NETWORK-MIB::portInfoPhyIfDescr,OCTET,read-only,,current,,A textual string containing information about the
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.1.3.2.1.1.7,BLADETYPE4-NETWORK-MIB::portInfoPhyIfType,INTEGER,read-only,,current,other(1):regular1822(2):hdh1822(3):ddn-x25(4):rfc877-x25(5):ethernet-csmacd(6):iso88023-csmacd(7):iso88024-tokenBus(8):iso88025-tokenRing(9):iso88026-man(10):starLan(11):proteon-10Mbit(12):proteon-80Mbit(13):hyperchannel(14):fddi(15):lapb(16):sdlc(17):ds1(18):e1(19):basicISDN(20):primaryISDN(21):propPointToPointSerial(22):ppp(23):softwareLoopback(24):eon(25):ethernet-3Mbit(26):nsip(27):slip(28):ultra(29):ds3(30):sip(31):frame-relay(32),The type of interface, distinguished according to
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.1.3.2.1.1.8,BLADETYPE4-NETWORK-MIB::portInfoPhyIfMtu,Integer32,read-only,,current,,The size of the largest datagram which can be
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.1.3.2.1.1.9,BLADETYPE4-NETWORK-MIB::portInfoPhyIfPhysAddress,OCTET,read-only,,current,,The interface's address at the protocol layer
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.1.3.2.1.1.10,BLADETYPE4-NETWORK-MIB::portInfoPhyIfOperStatus,INTEGER,read-only,,current,up(1):down(2):testing(3),The current operational state of the interface.
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.1.3.2.1.1.11,BLADETYPE4-NETWORK-MIB::portInfoPhyIfLastChange,TimeTicks,read-only,,current,,The value of sysUpTime at the time the interface
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.1.3.2.1.1.12,BLADETYPE4-NETWORK-MIB::portInfoMedia,INTEGER,read-only,,current,auto(0):copper(1):fiber(2),The switch port media.
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.1.3.2.1.1.21,BLADETYPE4-NETWORK-MIB::portInfoPvid,Unsigned32,read-only,,current,,This is the operational port vlan-id of the port. Typically, the value of this object is the same as the value of the agPortCurCfgPVID object. But if, for example, 802.1x is enabled on the port and the port is assigned a vlan-id via 802.1x, this port will be moved to the assigned vlan even when the port is configured with a different PVID.
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.1.3.2.1.1.22,BLADETYPE4-NETWORK-MIB::portInfoVlanTag,INTEGER,read-only,,current,untagged(0):tagged(1),This is the operational VLAN tag state of the port. Typically, the value of this object is the same as the value of the agPortCurCfgVlanTag objec. But if, for example, 802.1x is enabled on the port and if the port is assigned a vlan via 802.1x, the port will be operationally untagged even if the port is configured to be tagged.
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.1.3.4,BLADETYPE4-NETWORK-MIB::agDiff,,,,,,
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.1.3.4.2,BLADETYPE4-NETWORK-MIB::agDiffState,INTEGER,read-write,,current,diff(1):flashdiff(2):idle(3):inprogress(4):complete(5),When this object is read the current state is returned. idle(3) indicates that there is no diff in progess. complete(5) indicates that the last diff operation is completed. Setting the value to diff(1), will start a new diff operation Diff compares the new configuration with the current configuration and shows the pending configuration changes.  Setting the value to flashdiff(2), will start a new diff operation. flashdiff compares new configuration with the flash configuration. To read the configuration changes use the agDiffTable once the state of this variable returns complete.
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.1.3.4.3,BLADETYPE4-NETWORK-MIB::agDiffTableSize,Integer32,read-only,,current,,The number of strings in the diff table.
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.1.3.4.4,BLADETYPE4-NETWORK-MIB::agDiffTable,,not-accessible,,current,,The table of URL path for URL load balancing in the current_config.
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.1.3.4.4.1,BLADETYPE4-NETWORK-MIB::agDiffTableEntry,,not-accessible,agDiffIndex,current,,Information about an URL path for URL load balancing.
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.1.3.4.4.1.1,BLADETYPE4-NETWORK-MIB::agDiffIndex,Integer32,read-only,,current,,The table index.
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.1.3.4.4.1.2,BLADETYPE4-NETWORK-MIB::agDiffString,OCTET,read-only,,current,,A string in the diff table.
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.1.3.5,BLADETYPE4-NETWORK-MIB::agCfgDump,,,,,,
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.1.3.5.2,BLADETYPE4-NETWORK-MIB::agCfgDumpState,INTEGER,read-write,,current,dump(1):idle(2):inprogress(3):complete(4),When this object is read the current state is returned. idle(2) indicates that there is no dump in progess. complete(4) indicates that the last dump operation is completed. Setting the value to dump(1), will start a new dump operation Dump will show the current configuration. To read the configuration dump use the agCfgDumpTable once the state of this variable returns complete. Once the agCfgDumpTable is read the state should be set back to  'idle' which frees the dump buffer and others can issue a dump  command via SNMP.
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.1.3.5.3,BLADETYPE4-NETWORK-MIB::agCfgDumpTableSize,Integer32,read-only,,current,,The number of strings in the dump table.
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.1.3.5.4,BLADETYPE4-NETWORK-MIB::agCfgDumpTable,,not-accessible,,current,,The table of dump strings.
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.1.3.5.4.1,BLADETYPE4-NETWORK-MIB::agCfgDumpTableEntry,,not-accessible,agCfgDumpIndex,current,,An entry in the dump table.
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.1.3.5.4.1.1,BLADETYPE4-NETWORK-MIB::agCfgDumpIndex,Integer32,read-only,,current,,The table index.
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.1.3.5.4.1.2,BLADETYPE4-NETWORK-MIB::agCfgDumpString,OCTET,read-only,,current,,A string in the dump table.
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.1.3.7,BLADETYPE4-NETWORK-MIB::geaportInfo,,,,,,
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.1.3.7.1,BLADETYPE4-NETWORK-MIB::geaportInfoTable,,not-accessible,,current,,The table of gea port mapping.
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.1.3.7.1.1,BLADETYPE4-NETWORK-MIB::geaportInfoTableEntry,,not-accessible,geaportInfoLogicalIndex,current,,An entry in the geaport table mapping.
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.1.3.7.1.1.1,BLADETYPE4-NETWORK-MIB::geaportInfoLogicalIndex,Unsigned32,read-only,,current,,The logical port index.
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.1.3.7.1.1.2,BLADETYPE4-NETWORK-MIB::geaportInfoPort,INTEGER,read-only,,current,,The GEA Port (0-based).
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.1.3.7.1.1.3,BLADETYPE4-NETWORK-MIB::geaportInfoUnit,INTEGER,read-only,,current,,The GEA Unit.
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.1.3.8,BLADETYPE4-NETWORK-MIB::ufdInfo,,,,,,
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.1.3.8.1,BLADETYPE4-NETWORK-MIB::ufdInfoState,INTEGER,read-only,,current,enabled(1):disabled(2),Uplink Failure Detection State.
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.1.3.8.2,BLADETYPE4-NETWORK-MIB::ufdInfoLtMStatus,INTEGER,read-only,,current,up(1):down(2):forwarding(3):blocked(4),LtM Status.
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.1.3.8.3,BLADETYPE4-NETWORK-MIB::ufdInfoLtMPorts,OCTET,read-only,,current,,The LtM port list. The ports are presented in bitmap format. in receiving order: OCTET 1 OCTET 2 ..... xxxxxxxx xxxxxxxx ..... || || |_ port 8 || || || ||___ port 7 || |____ port 6 || . . . ||_________ port 1 |__________ reserved where x : 1 - The represented port belongs to LtM 0 - The represented port does not belong to LtM.
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.1.3.8.4,BLADETYPE4-NETWORK-MIB::ufdInfoLtMTrunks,OCTET,read-only,,current,,The LtM trunk list. The trunks are presented in bitmap format. in receiving order: OCTET 1 OCTET 2 ..... xxxxxxxx xxxxxxxx ..... || || |_ trunk 8 || || || ||___ trunk 7 || |____ trunk 6 || . . . ||_________ trunk 1 |__________ reserved where x : 1 - The represented trunk belongs to LtM 0 - The represented trunk does not belong to LtM.
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.1.3.8.5,BLADETYPE4-NETWORK-MIB::ufdInfoLtMAdminkey,INTEGER,read-only,,current,,The LtM admin key.
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.1.3.8.6,BLADETYPE4-NETWORK-MIB::ufdInfoLtDStatus,INTEGER,read-only,,current,up(1):autoDisabled(2),LtD status.
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.1.3.8.7,BLADETYPE4-NETWORK-MIB::ufdInfoLtDPorts,OCTET,read-only,,current,,The LtD port list. The ports are presented in bitmap format. in receiving order: OCTET 1 OCTET 2 ..... xxxxxxxx xxxxxxxx ..... || || |_ port 8 || || || ||___ port 7 || |____ port 6 || . . . ||_________ port 1 |__________ reserved where x : 1 - The represented port belongs to LtD 0 - The represented port does not belong to LtD.
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.1.3.8.8,BLADETYPE4-NETWORK-MIB::ufdInfoLtDTrunks,INTEGER,read-only,,current,,The LtD trunk list. The trunks are presented in bitmap format. in receiving order: OCTET 1 OCTET 2 ..... xxxxxxxx xxxxxxxx ..... || || |_ trunk 8 || || || ||___ trunk 7 || |____ trunk 6 || . . . ||_________ trunk 1 |__________ reserved where x : 1 - The represented trunk belongs to LtD 0 - The represented trunk does not belong to LtD.
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.1.3.8.9,BLADETYPE4-NETWORK-MIB::ufdInfoLtDAdminkeyMaxEnt,Integer32,read-only,,current,,The maximum number of rows in the LtD admin key configuration table.
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.1.3.8.10,BLADETYPE4-NETWORK-MIB::ufdInfoLtDAdminkeyTable,,not-accessible,,current,,The table of LtD admin key configuration.
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.1.3.8.10.1,BLADETYPE4-NETWORK-MIB::ufdInfoLtDAdminkeyTableEntry,,not-accessible,ufdInfoLtDAdminkey,current,,A row in the LtD admin key table.
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.1.3.8.10.1.1,BLADETYPE4-NETWORK-MIB::ufdInfoLtDAdminkey,INTEGER,read-only,,current,,The LtD admin key.
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.1.3.9,BLADETYPE4-NETWORK-MIB::sfpInfo,,,,,,
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.1.3.9.1,BLADETYPE4-NETWORK-MIB::sfpInfoTable,,not-accessible,,current,,The table of external port SFP information.
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.1.3.9.1.1,BLADETYPE4-NETWORK-MIB::sfpInfoTableEntry,,not-accessible,sfpInfoIndx,current,,A row in the external port SFP information table.
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.1.3.9.1.1.1,BLADETYPE4-NETWORK-MIB::sfpInfoIndx,Unsigned32,read-only,,current,,The external port SFX index.
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.1.3.9.1.1.2,BLADETYPE4-NETWORK-MIB::sfpInfoPort,OCTET,read-only,,current,,External Port SFP/XFP alias.
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.1.3.9.1.1.3,BLADETYPE4-NETWORK-MIB::sfpInfoDevice,OCTET,read-only,,current,,External Port SFP/XFP Device.
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.1.3.9.1.1.4,BLADETYPE4-NETWORK-MIB::sfpInfoTXEnable,INTEGER,read-only,,current,notInstalled(1):enabled(2):disabled(3):notAvailable(5),External Port SFP/XFP TX-Enable.
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.1.3.9.1.1.5,BLADETYPE4-NETWORK-MIB::sfpInfoRXSignal,INTEGER,read-only,,current,notInstalled(1):down(2):link(3):notAvailable(4),External Port SFP/XFP RX-Signal.
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.1.3.9.1.1.6,BLADETYPE4-NETWORK-MIB::sfpInfoTXFault,INTEGER,read-only,,current,notInstalled(1):fault(2):none(3):notAvailable(4),External Port SFP/XFP TX-Fault.
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.1.3.9.1.1.7,BLADETYPE4-NETWORK-MIB::sfpInfoApproved,INTEGER,read-only,,current,notInstalled(1):notApproved(2):sfpApproved(3),External Port SFP/XFP Approval.
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.1.3.9.1.1.8,BLADETYPE4-NETWORK-MIB::sfpInfoVendor,OCTET,read-only,,current,,External Port SFP/XFP device vendor.
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.1.3.9.1.1.9,BLADETYPE4-NETWORK-MIB::sfpInfoSerial,OCTET,read-only,,current,,External Port SFP/XFP device serial.
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.1.4,BLADETYPE4-NETWORK-MIB::agentOper,,,,,,
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.1.4.1,BLADETYPE4-NETWORK-MIB::agPortOperTable,,not-accessible,,current,,The table of port operations.
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.1.4.1.1,BLADETYPE4-NETWORK-MIB::agPortOperTableEntry,,not-accessible,portOperIdx,current,,A row in the port operations table.
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.1.4.1.1.1,BLADETYPE4-NETWORK-MIB::portOperIdx,Unsigned32,read-only,,current,,The port index.
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.1.4.1.1.2,BLADETYPE4-NETWORK-MIB::portOperState,INTEGER,read-write,,current,enabled(1):disabled(2),Enable/Disable port.
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.1.4.1.1.3,BLADETYPE4-NETWORK-MIB::portOperRmon,INTEGER,read-write,,current,enabled(1):disabled(2),Enable/Disable RMON for port.
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.1.4.2,BLADETYPE4-NETWORK-MIB::agNTPOper,,,,,,
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.1.4.2.1,BLADETYPE4-NETWORK-MIB::ntpOperSendReq,INTEGER,read-write,,current,no(1):yes(2),Allows the user to send requests to the NTP server.
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.1.4.3,BLADETYPE4-NETWORK-MIB::portOperDot1xTable,,not-accessible,,current,,The table of port operations.
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.1.4.3.1,BLADETYPE4-NETWORK-MIB::portOperDot1xTableEntry,,not-accessible,portOperDot1xIndx,current,,A row in the port 802.1x operation table.
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.1.4.3.1.1,BLADETYPE4-NETWORK-MIB::portOperDot1xIndx,Unsigned32,read-only,,current,,The port index.
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.1.4.3.1.2,BLADETYPE4-NETWORK-MIB::portOperDot1xReset,INTEGER,read-write,,current,no(1):yes(2),Reinitialize 802.1x access control on port.
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.1.4.3.1.3,BLADETYPE4-NETWORK-MIB::portOperDot1xReauth,INTEGER,read-write,,current,no(1):yes(2),Initiate reauthentication on port.
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.2,BLADETYPE4-NETWORK-MIB::layer2,,,,,,
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.2.1,BLADETYPE4-NETWORK-MIB::layer2Configs,,,,,,
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.2.1.1,BLADETYPE4-NETWORK-MIB::vlan,,,,,,
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.2.1.1.1,BLADETYPE4-NETWORK-MIB::vlanMaxEnt,Integer32,read-only,,current,,The maximum number of rows in the VLAN configuration table.
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.2.1.1.2,BLADETYPE4-NETWORK-MIB::vlanCurCfgTable,,not-accessible,,current,,The table of VLAN configuration.
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.2.1.1.2.1,BLADETYPE4-NETWORK-MIB::vlanCurCfgTableEntry,,not-accessible,vlanCurCfgVlanId,current,,A row in the VLAN configuration table.
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.2.1.1.2.1.1,BLADETYPE4-NETWORK-MIB::vlanCurCfgVlanId,Integer32,read-only,,current,,The VLAN identifier.
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.2.1.1.2.1.2,BLADETYPE4-NETWORK-MIB::vlanCurCfgVlanName,OCTET,read-only,,current,,The VLAN name.
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.2.1.1.2.1.3,BLADETYPE4-NETWORK-MIB::vlanCurCfgPorts,OCTET,read-only,,current,,The port list in the VLAN. The ports are presented in bitmap format. xxxxxxxx xxxxxxxx .....  || || |_ port 8 || ||  || ||___ port 7 || |____ port 6 || . . . ||_________ port 1 |__________ reserved where x : 1 - The represented port belongs to the VLAN
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.2.1.1.2.1.4,BLADETYPE4-NETWORK-MIB::vlanCurCfgState,INTEGER,read-only,,current,enabled(2):disabled(3),Enable or disable a VLAN
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.2.1.1.2.1.6,BLADETYPE4-NETWORK-MIB::vlanCurCfgStg,Integer32,read-only,,current,,The Spanning Tree Group for the VLAN.
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.2.1.1.3,BLADETYPE4-NETWORK-MIB::vlanNewCfgTable,,not-accessible,,current,,The table of VLAN configuration.
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.2.1.1.3.1,BLADETYPE4-NETWORK-MIB::vlanNewCfgTableEntry,,not-accessible,vlanNewCfgVlanId,current,,A row in the VLAN configuration table.
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.2.1.1.3.1.1,BLADETYPE4-NETWORK-MIB::vlanNewCfgVlanId,Integer32,read-only,,current,,The VLAN identifier.
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.2.1.1.3.1.2,BLADETYPE4-NETWORK-MIB::vlanNewCfgVlanName,OCTET,read-create,,current,,The VLAN name.
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.2.1.1.3.1.3,BLADETYPE4-NETWORK-MIB::vlanNewCfgPorts,OCTET,read-only,,current,,The port list in the VLAN. The ports are presented in bitmap format. in receiving order: xxxxxxxx xxxxxxxx .....  || || |_ port 8 || ||  || ||___ port 7 || |____ port 6 || . . . ||_________ port 1 |__________ reserved where x : 1 - The represented port belongs to the VLAN
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.2.1.1.3.1.4,BLADETYPE4-NETWORK-MIB::vlanNewCfgState,INTEGER,read-create,,current,enabled(2):disabled(3),Enable or disable a VLAN
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.2.1.1.3.1.5,BLADETYPE4-NETWORK-MIB::vlanNewCfgAddPort,Unsigned32,read-create,,current,,The port to be added to the specified VLAN. A '0' value is  returned when read.
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.2.1.1.3.1.6,BLADETYPE4-NETWORK-MIB::vlanNewCfgRemovePort,Unsigned32,read-create,,current,,The port to be removed from the specified VLAN. A '0' value is returned when read.
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.2.1.1.3.1.7,BLADETYPE4-NETWORK-MIB::vlanNewCfgDelete,INTEGER,read-create,,current,other(1):delete(2),This is an action object to create or delete a VLAN. other(1) is returned always when read. The following values are writable: delete(2)...to delete a VLAN
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.2.1.1.3.1.9,BLADETYPE4-NETWORK-MIB::vlanNewCfgStg,Integer32,read-create,,current,,The Spanning Tree Group for the VLAN.
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.2.1.2,BLADETYPE4-NETWORK-MIB::trunkgroup,,,,,,
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.2.1.2.1,BLADETYPE4-NETWORK-MIB::trunkGroupTableMaxSize,Integer32,read-only,,current,,The maximum number of entries in trunk group table.
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.2.1.2.2,BLADETYPE4-NETWORK-MIB::trunkGroupCurCfgTable,,not-accessible,,current,,The table of trunk group configuration.
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.2.1.2.2.1,BLADETYPE4-NETWORK-MIB::trunkGroupCurCfgTableEntry,,not-accessible,trunkGroupCurCfgIndex,current,,A row in the trunk group configuration table.
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.2.1.2.2.1.1,BLADETYPE4-NETWORK-MIB::trunkGroupCurCfgIndex,Integer32,read-only,,current,,The identifier of the trunk group.
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.2.1.2.2.1.2,BLADETYPE4-NETWORK-MIB::trunkGroupCurCfgPorts,OCTET,read-only,,current,,The port list in the trunk group. The ports are presented in  bitmap format. in receiving order: OCTET 1 OCTET 2 ..... xxxxxxxx xxxxxxxx .....  || || |_ port 8 || ||  || ||___ port 7 || |____ port 6 || . . . ||_________ port 1 |__________ reserved where x : 1 - The represented port belongs to the trunk group 0 - The represented port does not belong to the trunk group
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.2.1.2.2.1.3,BLADETYPE4-NETWORK-MIB::trunkGroupCurCfgState,INTEGER,read-only,,current,enable(1):disable(2),Enable or disable a trunk group.
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.2.1.2.3,BLADETYPE4-NETWORK-MIB::trunkGroupNewCfgTable,,not-accessible,,current,,The table of trunk group configuration.
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.2.1.2.3.1,BLADETYPE4-NETWORK-MIB::trunkGroupNewCfgTableEntry,,not-accessible,trunkGroupNewCfgIndex,current,,A row in the trunk group configuration table.
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.2.1.2.3.1.1,BLADETYPE4-NETWORK-MIB::trunkGroupNewCfgIndex,Integer32,read-only,,current,,The identifier of the trunk group.
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.2.1.2.3.1.2,BLADETYPE4-NETWORK-MIB::trunkGroupNewCfgPorts,OCTET,read-only,,current,,The port list in the trunk group. The ports are presented in bitmap format. in receiving order: OCTET 1 OCTET 2 ..... xxxxxxxx xxxxxxxx .....  || || |_ port 8 || ||  || ||___ port 7 || |____ port 6 || . . . ||_________ port 1 |__________ reserved where x : 1 - The represented port belongs to the trunk group 0 - The represented port does not belong to the trunk group
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.2.1.2.3.1.3,BLADETYPE4-NETWORK-MIB::trunkGroupNewCfgAddPort,Unsigned32,read-create,,current,,The port to be added in the trunk group. When read, 0 is returned.
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.2.1.2.3.1.4,BLADETYPE4-NETWORK-MIB::trunkGroupNewCfgRemovePort,Unsigned32,read-create,,current,,The port to be deleted from the trunk group. when read, 0
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.2.1.2.3.1.5,BLADETYPE4-NETWORK-MIB::trunkGroupNewCfgState,INTEGER,read-create,,current,enable(1):disable(2),Enable or disable a trunk group.
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.2.1.2.3.1.6,BLADETYPE4-NETWORK-MIB::trunkGroupNewCfgDelete,INTEGER,read-create,,current,other(1):delete(2),Setting the value to delete(2) will delete the entire row. When read, other(1) is returned.
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.2.1.3,BLADETYPE4-NETWORK-MIB::stgCfg,,,,,,
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.2.1.3.1,BLADETYPE4-NETWORK-MIB::stgCurCfgTable,,not-accessible,,current,,The table of Spanning Tree Group configuration.
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.2.1.3.1.1,BLADETYPE4-NETWORK-MIB::stgCurCfgTableEntry,,not-accessible,stgCurCfgIndex,current,,Information about a particular Spanning Tree Group configuration.
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.2.1.3.1.1.1,BLADETYPE4-NETWORK-MIB::stgCurCfgIndex,Integer32,read-only,,current,,The identifier of a particular Spanning Tree Group. This is also index to the entLogicalTable of Entity MIB.
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.2.1.3.1.1.2,BLADETYPE4-NETWORK-MIB::stgCurCfgState,INTEGER,read-only,,current,on(1):off(2),Turn on of off Spanning Tree operation of a particular Spanning Tree Group.
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.2.1.3.1.1.5,BLADETYPE4-NETWORK-MIB::stgCurCfgPriority,INTEGER,read-only,,current,,The value of the write-able portion of the Bridge ID, i.e., the first two octets of the (8 octet long) Bridge ID.
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.2.1.3.1.1.6,BLADETYPE4-NETWORK-MIB::stgCurCfgBrgHelloTime,INTEGER,read-only,,current,,The value in seconds that all bridges use for HelloTime when this  bridge is acting as the root.
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.2.1.3.1.1.7,BLADETYPE4-NETWORK-MIB::stgCurCfgBrgForwardDelay,INTEGER,read-only,,current,,The value in seconds that all bridges use for ForwardDelay when this  bridge is acting as the root.
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.2.1.3.1.1.8,BLADETYPE4-NETWORK-MIB::stgCurCfgBrgMaxAge,INTEGER,read-only,,current,,The value in seconds that all bridges use for MaxAge when this bridge is acting as the root.
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.2.1.3.1.1.10,BLADETYPE4-NETWORK-MIB::stgCurCfgVlanBmap,OCTET,read-only,,current,,The vlans applied to the spanning tree group. The vlans are  presented in bitmap format. This string displays vlan number xxxxxxxx xxxxxxxx .....  || || |_ vlan 9 || ||  || ||___ vlan 8 || |____ vlan 7 || . . . ||_________ vlan 2 |__________ vlan 1 (as index to stgCurCfgTable) where x : 1 - The represented vlan applied to the spanning tree. 
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.2.1.3.2,BLADETYPE4-NETWORK-MIB::stgNewCfgTable,,not-accessible,,current,,The table of Spanning Tree Groups configuration in the new_config.
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.2.1.3.2.1,BLADETYPE4-NETWORK-MIB::stgNewCfgTableEntry,,not-accessible,stgNewCfgIndex,current,,Information about a particular Spanning Tree Group configuration.
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.2.1.3.2.1.1,BLADETYPE4-NETWORK-MIB::stgNewCfgIndex,Integer32,read-only,,current,,The identifier of a particular Spanning Tree Group. This is also index to the entLogicalTable of Entity MIB.
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.2.1.3.2.1.2,BLADETYPE4-NETWORK-MIB::stgNewCfgState,INTEGER,read-create,,current,on(1):off(2),Turn on of off Spanning Tree operation of a particular Spanning Tree Group.
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.2.1.3.2.1.3,BLADETYPE4-NETWORK-MIB::stgNewCfgDefaultCfg,INTEGER,read-create,,current,default-config(1),Setting the value to default-config(1) will set the default configuration as recommended by IEEE 802.1D for a particular Spanning Tree Group. default-config (1) is always returned 
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.2.1.3.2.1.4,BLADETYPE4-NETWORK-MIB::stgNewCfgAddVlan,Integer32,read-create,,current,,The vlan to be added to the specified Spanning Tree Group. A  '0' value is returned when read.
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.2.1.3.2.1.5,BLADETYPE4-NETWORK-MIB::stgNewCfgRemoveVlan,Integer32,read-create,,current,,The vlan to be removed from the specified Spanning Tree Group. A '0' value is returned when read.
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.2.1.3.2.1.8,BLADETYPE4-NETWORK-MIB::stgNewCfgPriority,INTEGER,read-create,,current,,The value of the write-able portion of the Bridge ID, i.e., the first two octets of the (8 octet long) Bridge ID.
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.2.1.3.2.1.9,BLADETYPE4-NETWORK-MIB::stgNewCfgBrgHelloTime,INTEGER,read-create,,current,,The value in seconds that all bridges use for HelloTime when this  bridge is acting as the root.
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.2.1.3.2.1.10,BLADETYPE4-NETWORK-MIB::stgNewCfgBrgForwardDelay,INTEGER,read-create,,current,,The value in seconds that all bridges use for ForwardDelay when this  bridge is acting as the root.
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.2.1.3.2.1.11,BLADETYPE4-NETWORK-MIB::stgNewCfgBrgMaxAge,INTEGER,read-create,,current,,The value in seconds that all bridges use for MaxAge when this bridge is acting as the root.
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.2.1.3.2.1.13,BLADETYPE4-NETWORK-MIB::stgNewCfgVlanBmap,OCTET,read-only,,current,,The vlans applied to the spanning tree group. The vlans are  presented in bitmap format. This string displays vlan number xxxxxxxx xxxxxxxx .....  || || |_ vlan 9 || ||  || ||___ vlan 8 || |____ vlan 7 || . . . ||_________ vlan 2 |__________ vlan 1 (as index to stgCurCfgTable) where x : 1 - The represented vlan applied to the spanning tree. 
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.2.1.3.3,BLADETYPE4-NETWORK-MIB::stgCurCfgPortTable,,not-accessible,,current,,The table of Spanning Tree Group port configuration in the current_config.
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.2.1.3.3.1,BLADETYPE4-NETWORK-MIB::stgCurCfgPortTableEntry,,not-accessible,stgCurCfgStgIndex:stgCurCfgPortIndex,current,,Information about port configuration of a particular Spanning Tree Group.
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.2.1.3.3.1.1,BLADETYPE4-NETWORK-MIB::stgCurCfgStgIndex,Integer32,read-only,,current,,The identifier of a particular Spanning Tree Group. This is also index to the entLogicalTable of Entity MIB.
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.2.1.3.3.1.2,BLADETYPE4-NETWORK-MIB::stgCurCfgPortIndex,Unsigned32,read-only,,current,,The port identifier of a particular Spanning Tree Group.
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.2.1.3.3.1.3,BLADETYPE4-NETWORK-MIB::stgCurCfgPortState,INTEGER,read-only,,current,on(1):off(2),Turn on of off Spanning Tree operation of a particular port of a Spanning Tree Group.
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.2.1.3.3.1.4,BLADETYPE4-NETWORK-MIB::stgCurCfgPortPriority,INTEGER,read-only,,current,,The value of the priority field which is contained in the first  (in network byte order) octet of the (2 octet long) Port ID.
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.2.1.3.3.1.5,BLADETYPE4-NETWORK-MIB::stgCurCfgPortPathCost,INTEGER,read-only,,current,,The contribution of this port to the path cost of paths towards the  spanning tree root which include this port.
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.2.1.3.3.1.6,BLADETYPE4-NETWORK-MIB::stgCurCfgPortLink,INTEGER,read-only,,current,auto(1):p2p(2):shared(3),The type of the port link. (for RSTP only)
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.2.1.3.3.1.7,BLADETYPE4-NETWORK-MIB::stgCurCfgPortEdge,INTEGER,read-only,,current,enabled(1):disabled(2),The state of port edge. (for RSTP only)
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.2.1.3.3.1.8,BLADETYPE4-NETWORK-MIB::stgCurCfgPortFastFwd,INTEGER,read-only,,current,enabled(1):disabled(2),The state of port fast forwarding.
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.2.1.3.4,BLADETYPE4-NETWORK-MIB::stgNewCfgPortTable,,not-accessible,,current,,The table of Spanning Tree Group port configuration in the new_config.
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.2.1.3.4.1,BLADETYPE4-NETWORK-MIB::stgNewCfgPortTableEntry,,not-accessible,stgNewCfgStgIndex:stgNewCfgPortIndex,current,,Information about port configuration of a particular Spanning Tree Group.
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.2.1.3.4.1.1,BLADETYPE4-NETWORK-MIB::stgNewCfgStgIndex,Integer32,read-only,,current,,The identifier of a particular Spanning Tree Group. This is also index to the entLogicalTable of Entity MIB.
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.2.1.3.4.1.2,BLADETYPE4-NETWORK-MIB::stgNewCfgPortIndex,Unsigned32,read-only,,current,,The port identifier of a particular Spanning Tree Group.
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.2.1.3.4.1.3,BLADETYPE4-NETWORK-MIB::stgNewCfgPortState,INTEGER,read-create,,current,on(1):off(2),Turn on of off Spanning Tree operation of a particular port of a Spanning Tree Group.
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.2.1.3.4.1.4,BLADETYPE4-NETWORK-MIB::stgNewCfgPortPriority,INTEGER,read-create,,current,,The value of the priority field which is contained in the first  (in network byte order) octet of the (2 octet long) Port ID.
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.2.1.3.4.1.5,BLADETYPE4-NETWORK-MIB::stgNewCfgPortPathCost,INTEGER,read-create,,current,,The contribution of this port to the path cost of paths towards the  spanning tree root which include this port.
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.2.1.3.4.1.6,BLADETYPE4-NETWORK-MIB::stgNewCfgPortLink,INTEGER,read-create,,current,auto(1):p2p(2):shared(3),The type of the port link. (for RSTP only)
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.2.1.3.4.1.7,BLADETYPE4-NETWORK-MIB::stgNewCfgPortEdge,INTEGER,read-create,,current,enabled(1):disabled(2),The state of port edge. (for RSTP only)
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.2.1.3.4.1.8,BLADETYPE4-NETWORK-MIB::stgNewCfgPortFastFwd,INTEGER,read-create,,current,enabled(1):disabled(2),The state of port fast forwarding.
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.2.1.4,BLADETYPE4-NETWORK-MIB::mirroring,,,,,,
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.2.1.4.1,BLADETYPE4-NETWORK-MIB::mirrPortMirr,,,,,,
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.2.1.4.1.1,BLADETYPE4-NETWORK-MIB::pmCurCfgPortMirrState,INTEGER,read-only,,current,enabled(1):disabled(2),The state of port-based port mirroring.
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.2.1.4.1.2,BLADETYPE4-NETWORK-MIB::pmNewCfgPortMirrState,INTEGER,read-write,,current,enabled(1):disabled(2),The state of port-based port mirroring.
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.2.1.4.1.3,BLADETYPE4-NETWORK-MIB::pmCurCfgPortMonitorTable,,not-accessible,,current,,The table of monitoring ports.
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.2.1.4.1.3.1,BLADETYPE4-NETWORK-MIB::pmCurCfgPortMonitorEntry,,not-accessible,pmCurCfgPmirrMoniPortIndex:pmCurCfgPmirrMirrPortIndex,current,,A row in the monitoring port table.
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.2.1.4.1.3.1.1,BLADETYPE4-NETWORK-MIB::pmCurCfgPmirrMoniPortIndex,Unsigned32,read-only,,current,,The monitoring port number.
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.2.1.4.1.3.1.2,BLADETYPE4-NETWORK-MIB::pmCurCfgPmirrMirrPortIndex,Unsigned32,read-only,,current,,The mirrored port number
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.2.1.4.1.3.1.3,BLADETYPE4-NETWORK-MIB::pmCurCfgPmirrDirection,INTEGER,read-only,,current,in(1):out(2):both(3),The type of traffic to be monitored with respect to the mirrored port.
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.2.1.4.1.4,BLADETYPE4-NETWORK-MIB::pmNewCfgPortMonitorTable,,not-accessible,,current,,The table of monitoring ports.
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.2.1.4.1.4.1,BLADETYPE4-NETWORK-MIB::pmNewCfgPortMonitorEntry,,not-accessible,pmNewCfgPmirrMoniPortIndex:pmNewCfgPmirrMirrPortIndex,current,,A row in the monitoring port table.
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.2.1.4.1.4.1.1,BLADETYPE4-NETWORK-MIB::pmNewCfgPmirrMoniPortIndex,Unsigned32,read-only,,current,,The monitoring port number.
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.2.1.4.1.4.1.2,BLADETYPE4-NETWORK-MIB::pmNewCfgPmirrMirrPortIndex,Unsigned32,read-only,,current,,The mirrored port number
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.2.1.4.1.4.1.3,BLADETYPE4-NETWORK-MIB::pmNewCfgPmirrDirection,INTEGER,read-create,,current,in(1):out(2):both(3),The type of traffic to be monitored with respect to the mirrored port.
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.2.1.4.1.4.1.4,BLADETYPE4-NETWORK-MIB::pmNewCfgPmirrDelete,INTEGER,read-create,,current,other(1):delete(2),Setting the value to delete(2) will delete the entire row. When read, other(1) is returned.
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.2.1.4.1.4.1.10,BLADETYPE4-NETWORK-MIB::pmNewCfgPmonDelete,INTEGER,read-create,,current,other(1):delete(2),Setting the value to delete(2) will delete the monitor port. When read, other(1) is returned.
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.2.1.5,BLADETYPE4-NETWORK-MIB::mstCfg,,,,,,
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.2.1.5.1,BLADETYPE4-NETWORK-MIB::mstGeneralCfg,,,,,,
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.2.1.5.1.1,BLADETYPE4-NETWORK-MIB::mstCurCfgState,INTEGER,read-only,,current,enabled(2):disabled(3),Enable or disable MSTP/RSTP
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.2.1.5.1.2,BLADETYPE4-NETWORK-MIB::mstNewCfgState,INTEGER,read-write,,current,enabled(2):disabled(3),Enable or disable MSTP/RSTP
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.2.1.5.1.3,BLADETYPE4-NETWORK-MIB::mstCurCfgRegionName,OCTET,read-only,,current,,The Name for the Region's configuration.
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.2.1.5.1.4,BLADETYPE4-NETWORK-MIB::mstNewCfgRegionName,OCTET,read-write,,current,,The Name for the Region's configuration.
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.2.1.5.1.5,BLADETYPE4-NETWORK-MIB::mstCurCfgRegionVersion,INTEGER,read-only,,current,,Version of the MST Region.
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.2.1.5.1.6,BLADETYPE4-NETWORK-MIB::mstNewCfgRegionVersion,INTEGER,read-write,,current,,Version of the MST Region.
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.2.1.5.1.7,BLADETYPE4-NETWORK-MIB::mstCurCfgMaxHopCount,INTEGER,read-only,,current,,Indicates the maximum hop count value.
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.2.1.5.1.8,BLADETYPE4-NETWORK-MIB::mstNewCfgMaxHopCount,INTEGER,read-write,,current,,Indicates the maximum hop count value.
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.2.1.5.1.9,BLADETYPE4-NETWORK-MIB::mstCurCfgStpMode,INTEGER,read-only,,current,mstp(1):rstp(2),The version of Spanning Tree Protocal the bridge is currently  running.
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.2.1.5.1.10,BLADETYPE4-NETWORK-MIB::mstNewCfgStpMode,INTEGER,read-write,,current,mstp(1):rstp(2),The version of Spanning Tree Protocal the bridge is currently  running.
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.2.1.5.2,BLADETYPE4-NETWORK-MIB::mstCistCfg,,,,,,
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.2.1.5.2.1,BLADETYPE4-NETWORK-MIB::mstCistDefaultCfg,INTEGER,read-write,,current,default(1),Setting the value to default(1) will set the Multiple Spanning Tree and member parameters to default. default(1) is  always returned when read, but it does not mean anything.
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.2.1.5.2.2,BLADETYPE4-NETWORK-MIB::mstCistBridgeCfg,,,,,,
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.2.1.5.2.2.1,BLADETYPE4-NETWORK-MIB::mstCistCurCfgBridgePriority,INTEGER,read-only,,current,,The value of the writable portion of the Brigde Identifier comprising of the first two octets.
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.2.1.5.2.2.2,BLADETYPE4-NETWORK-MIB::mstCistNewCfgBridgePriority,INTEGER,read-write,,current,,The value of the writable portion of the Brigde Identifier comprising of the first two octets.
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.2.1.5.2.2.5,BLADETYPE4-NETWORK-MIB::mstCistCurCfgBridgeMaxAge,INTEGER,read-only,,current,,The value in seconds that all bridges use for MaxAge when this bridge is acting as the root.
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.2.1.5.2.2.6,BLADETYPE4-NETWORK-MIB::mstCistNewCfgBridgeMaxAge,INTEGER,read-write,,current,,The value in seconds that all bridges use for MaxAge when this bridge is acting as the root.
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.2.1.5.2.2.7,BLADETYPE4-NETWORK-MIB::mstCistCurCfgBridgeForwardDelay,INTEGER,read-only,,current,,The value in seconds that all bridges use for ForwardDelay when this  bridge is acting as the root.
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.2.1.5.2.2.8,BLADETYPE4-NETWORK-MIB::mstCistNewCfgBridgeForwardDelay,INTEGER,read-write,,current,,The value in seconds that all bridges use for ForwardDelay when this  bridge is acting as the root.
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.2.1.5.2.2.9,BLADETYPE4-NETWORK-MIB::mstCistCurCfgVlanBmap,OCTET,read-only,,current,,The vlans applied to the CIST group. The vlans are  presented in bitmap format. This string displays vlan number from 1 to 4094. in receiving order: OCTET 1 OCTET 2 ..... xxxxxxxx xxxxxxxx .....  || || |_ vlan 9 || ||  || ||___ vlan 8 || |____ vlan 7 || . . . ||_________ vlan 2 |__________ vlan 1 where x : 1 - The represented vlan applied to the CIST group.  0 - The represented vlan not applied to the group
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.2.1.5.2.2.10,BLADETYPE4-NETWORK-MIB::mstCistNewCfgVlanBmap,OCTET,read-only,,current,,The vlans applied to the CIST group. The vlans are  presented in bitmap format. This string displays vlan number from 1 to 4094. in receiving order: OCTET 1 OCTET 2 ..... xxxxxxxx xxxxxxxx .....  || || |_ vlan 9 || ||  || ||___ vlan 8 || |____ vlan 7 || . . . ||_________ vlan 2 |__________ vlan 1 where x : 1 - The represented vlan applied to the CIST group.  0 - The represented vlan not applied to the group
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.2.1.5.2.2.11,BLADETYPE4-NETWORK-MIB::mstCistNewCfgAddVlan,Integer32,read-create,,current,,The vlan to be added to the CIST Group. A  '0' value is returned when read.
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.2.1.5.2.3,BLADETYPE4-NETWORK-MIB::mstCistCurCfgPortTable,,not-accessible,,current,,The table of CIST Port configuration.
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.2.1.5.2.3.1,BLADETYPE4-NETWORK-MIB::mstCistCurCfgPortTableEntry,,not-accessible,mstCistCurCfgPortIndex,current,,Information about a particular CIST Port configuration.
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.2.1.5.2.3.1.1,BLADETYPE4-NETWORK-MIB::mstCistCurCfgPortIndex,Unsigned32,read-only,,current,,The port number of the port for which this entry contains spanning tree configuration.
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.2.1.5.2.3.1.2,BLADETYPE4-NETWORK-MIB::mstCistCurCfgPortPriority,INTEGER,read-only,,current,,The four most significant bits of the Port Identifier of the  Spanning Tree instance can be modified by setting this value.
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.2.1.5.2.3.1.3,BLADETYPE4-NETWORK-MIB::mstCistCurCfgPortPathCost,INTEGER,read-only,,current,,The contribution of this port to the path cost of paths towards  the CIST Root which include this port.
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.2.1.5.2.3.1.4,BLADETYPE4-NETWORK-MIB::mstCistCurCfgPortLinkType,INTEGER,read-only,,current,auto(1):p2p(2):shared(3),The administrative point-to-point status of the LAN segment attached  to this port. A value of p2p (2) indicates that this port should  always be treated as if it is connected to a point-to-point link.  A value of shared(3) indicates that this port should be treated as  having a shared media connection. A value of auto(1) indicates that  this port is considered to have a point-to-point link if it is an  Aggregator and all of its members are aggregatable, or if the MAC  entity is configured for full duplex operation, either through auto-negotiation or by management means. (for MSTP only)
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.2.1.5.2.3.1.5,BLADETYPE4-NETWORK-MIB::mstCistCurCfgPortEdge,INTEGER,read-only,,current,enabled(1):disabled(2),The value of the Edge Port parameter. (for MSTP only)
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.2.1.5.2.3.1.6,BLADETYPE4-NETWORK-MIB::mstCistCurCfgPortStpState,INTEGER,read-only,,current,on(1):off(2),Turn port's Spanning Tree on/off.
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.2.1.5.2.3.1.7,BLADETYPE4-NETWORK-MIB::mstCistCurCfgPortHelloTime,INTEGER,read-only,,current,,The amount of time between the transmission of Configuration Port  PDUs in seconds.
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.2.1.5.2.4,BLADETYPE4-NETWORK-MIB::mstCistNewCfgPortTable,,not-accessible,,current,,The table of CIST Port configuration.
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.2.1.5.2.4.1,BLADETYPE4-NETWORK-MIB::mstCistNewCfgPortTableEntry,,not-accessible,mstCistNewCfgPortIndex,current,,Information about a particular CIST Port configuration.
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.2.1.5.2.4.1.1,BLADETYPE4-NETWORK-MIB::mstCistNewCfgPortIndex,Unsigned32,read-only,,current,,The port number of the port for which this entry contains spanning tree configuration.
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.2.1.5.2.4.1.2,BLADETYPE4-NETWORK-MIB::mstCistNewCfgPortPriority,INTEGER,read-create,,current,,The four most significant bits of the Port Identifier of the  Spanning Tree instance can be modified by setting this value.
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.2.1.5.2.4.1.3,BLADETYPE4-NETWORK-MIB::mstCistNewCfgPortPathCost,INTEGER,read-create,,current,,The contribution of this port to the path cost of paths towards  the CIST Root which include this port.
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.2.1.5.2.4.1.4,BLADETYPE4-NETWORK-MIB::mstCistNewCfgPortLinkType,INTEGER,read-create,,current,auto(1):p2p(2):shared(3),The administrative point-to-point status of the LAN segment attached  to this port. A value of p2p (2) indicates that this port should  always be treated as if it is connected to a point-to-point link.  A value of shared(3) indicates that this port should be treated as  having a shared media connection. A value of auto(1) indicates that  this port is considered to have a point-to-point link if it is an  Aggregator and all of its members are aggregatable, or if the MAC  entity is configured for full duplex operation, either through auto-negotiation or by management means. (for MSTP only)
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.2.1.5.2.4.1.5,BLADETYPE4-NETWORK-MIB::mstCistNewCfgPortEdge,INTEGER,read-create,,current,enabled(1):disabled(2),The value of the Edge Port parameter. (for MSTP only)
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.2.1.5.2.4.1.6,BLADETYPE4-NETWORK-MIB::mstCistNewCfgPortStpState,INTEGER,read-create,,current,on(1):off(2),Turn port's Spanning Tree on/off.
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.2.1.5.2.4.1.7,BLADETYPE4-NETWORK-MIB::mstCistNewCfgPortHelloTime,INTEGER,read-create,,current,,The amount of time between the transmission of Configuration Port  PDUs in seconds.
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.2.1.6,BLADETYPE4-NETWORK-MIB::lacp,,,,,,
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.2.1.6.1,BLADETYPE4-NETWORK-MIB::lacpCurSystemPriority,INTEGER,read-only,,current,,A 2-octet read-write value indicating the priority value associated with the Actor's System ID.
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.2.1.6.2,BLADETYPE4-NETWORK-MIB::lacpNewSystemPriority,INTEGER,read-write,,current,,A 2-octet read-write value indicating the priority value associated with the Actor's System ID.
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.2.1.6.5,BLADETYPE4-NETWORK-MIB::lacpCurSystemTimeoutTime,INTEGER,read-only,,current,short(3):long(90),If a port does not receive LACPDUs for Timeout time LACP  information pertaining to the port is invalidated. Its every 3 sec (short) and every 90 sec (long 3).
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.2.1.6.6,BLADETYPE4-NETWORK-MIB::lacpNewSystemTimeoutTime,INTEGER,read-write,,current,short(3):long(90),If a port does not receive LACPDUs for Timeout time LACP  information pertaining to the port is invalidated. Its every 3 sec (short) and every 90 sec (long 3).
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.2.1.6.7,BLADETYPE4-NETWORK-MIB::lacpCurPortCfgTable,,not-accessible,,current,,The table of LACP port configuration.
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.2.1.6.7.1,BLADETYPE4-NETWORK-MIB::lacpCurPortCfgTableEntry,,not-accessible,lacpCurPortCfgTableId,current,,A row in the LACP port configuration table.
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.2.1.6.7.1.1,BLADETYPE4-NETWORK-MIB::lacpCurPortCfgTableId,Unsigned32,read-only,,current,, LACP port number.
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.2.1.6.7.1.2,BLADETYPE4-NETWORK-MIB::lacpCurPortState,INTEGER,read-only,,current,off(1):active(2):passive(3),LACP port state can be one of three states  off (Not participating in LACP)  Active (Initiates LACPDU updates) Passive (Does not initiate LACPDU updates but responds to peer.
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.2.1.6.7.1.3,BLADETYPE4-NETWORK-MIB::lacpCurPortActorPortPriority,INTEGER,read-only,,current,,The priority value assigned to this Aggregation Port. This 16-bit value is read-only.
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.2.1.6.7.1.4,BLADETYPE4-NETWORK-MIB::lacpCurPortActorAdminKey,INTEGER,read-only,,current,,The current administrative value of the Key for the Aggregation Port. This is a 16-bit read-only value. The meaning of particular Key values is of local significance.
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.2.1.6.8,BLADETYPE4-NETWORK-MIB::lacpNewPortCfgTable,,not-accessible,,current,,The table of LACP port configuration.
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.2.1.6.8.1,BLADETYPE4-NETWORK-MIB::lacpNewPortCfgTableEntry,,not-accessible,lacpNewPortCfgTableId,current,,A row in the LACP port configuration table.
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.2.1.6.8.1.1,BLADETYPE4-NETWORK-MIB::lacpNewPortCfgTableId,Unsigned32,read-only,,current,, LACP port number.
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.2.1.6.8.1.2,BLADETYPE4-NETWORK-MIB::lacpNewPortState,INTEGER,read-write,,current,off(1):active(2):passive(3),LACP port state can be one of three states  off (Not participating in LACP)  Active (Initiates LACPDU updates) Passive (Does not initiate LACPDU updates but responds to peer.
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.2.1.6.8.1.3,BLADETYPE4-NETWORK-MIB::lacpNewPortActorPortPriority,INTEGER,read-write,,current,,The priority value assigned to this Aggregation Port. This 16-bit value is read-write.
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.2.1.6.8.1.4,BLADETYPE4-NETWORK-MIB::lacpNewPortActorAdminKey,INTEGER,read-write,,current,,The current administrative value of the Key for the Aggregation Port. This is a 16-bit read-write value. The meaning of particular Key values is of local significance.
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.2.1.6.9,BLADETYPE4-NETWORK-MIB::lacpDeleteTrunk,INTEGER,read-write,,current,,Delete a trunk with specified admin key
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.2.1.7,BLADETYPE4-NETWORK-MIB::thash,,,,,,
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.2.1.7.1,BLADETYPE4-NETWORK-MIB::thashL2,,,,,,
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.2.1.7.1.1,BLADETYPE4-NETWORK-MIB::l2ThashCurCfgSmacState,INTEGER,read-only,,current,enable(1):disable(2),Enable or disable smac hash.
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.2.1.7.1.2,BLADETYPE4-NETWORK-MIB::l2ThashNewCfgSmacState,INTEGER,read-write,,current,enable(1):disable(2),Enable or disable smac hash.
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.2.1.7.1.3,BLADETYPE4-NETWORK-MIB::l2ThashCurCfgDmacState,INTEGER,read-only,,current,enable(1):disable(2),Enable or disable dmac hash.
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.2.1.7.1.4,BLADETYPE4-NETWORK-MIB::l2ThashNewCfgDmacState,INTEGER,read-write,,current,enable(1):disable(2),Enable or disable dmac hash.
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.2.1.7.1.5,BLADETYPE4-NETWORK-MIB::l2ThashCurCfgSipState,INTEGER,read-only,,current,enable(1):disable(2),Enable or disable sip hash.
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.2.1.7.1.6,BLADETYPE4-NETWORK-MIB::l2ThashNewCfgSipState,INTEGER,read-write,,current,enable(1):disable(2),Enable or disable sip hash.
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.2.1.7.1.7,BLADETYPE4-NETWORK-MIB::l2ThashCurCfgDipState,INTEGER,read-only,,current,enable(1):disable(2),Enable or disable dip hash.
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.2.1.7.1.8,BLADETYPE4-NETWORK-MIB::l2ThashNewCfgDipState,INTEGER,read-write,,current,enable(1):disable(2),Enable or disable dip hash.
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.2.1.8,BLADETYPE4-NETWORK-MIB::l2GeneralCfg,,,,,,
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.2.1.8.1,BLADETYPE4-NETWORK-MIB::upfastCurCfgState,INTEGER,read-only,,current,enable(1):disable(2),Enable or disable uplink fast
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.2.1.8.2,BLADETYPE4-NETWORK-MIB::upfastNewCfgState,INTEGER,read-write,,current,enable(1):disable(2),Enable or disable uplink fast
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.2.1.8.3,BLADETYPE4-NETWORK-MIB::updateCurCfgState,INTEGER,read-only,,current,,UplinkFast station update rate: packets per second
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.2.1.8.4,BLADETYPE4-NETWORK-MIB::updateNewCfgState,INTEGER,read-write,,current,,UplinkFast station update rate: packets per second
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.2.1.8.9,BLADETYPE4-NETWORK-MIB::pvstCompatibilityCurCfgState,INTEGER,read-only,,current,enable(1):disable(2),Enable or disable PVST+ compatibility
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.2.1.8.10,BLADETYPE4-NETWORK-MIB::pvstCompatibilityNewCfgState,INTEGER,read-write,,current,enable(1):disable(2),Enable or disable PVST+ compatibility
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.2.1.9,BLADETYPE4-NETWORK-MIB::ufd,,,,,,
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.2.1.9.1,BLADETYPE4-NETWORK-MIB::ufdGeneralCfg,,,,,,
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.2.1.9.1.1,BLADETYPE4-NETWORK-MIB::ufdCurCfgState,INTEGER,read-only,,current,enabled(1):disabled(2),Enable or disable UFD state
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.2.1.9.1.2,BLADETYPE4-NETWORK-MIB::ufdNewCfgState,INTEGER,read-write,,current,enabled(1):disabled(2),Enable or disable UFD state
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.2.1.9.1.3,BLADETYPE4-NETWORK-MIB::ufdCurCfgLtMPorts,OCTET,read-only,,current,,The LtM port list. The ports are presented in bitmap format. in receiving order: OCTET 1 OCTET 2 ..... xxxxxxxx xxxxxxxx ..... || || |_ port 8 || || || ||___ port 7 || |____ port 6 || . . . ||_________ port 1 |__________ reserved where x : 1 - The represented port belongs to LtM 0 - The represented port does not belong to LtM
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.2.1.9.1.4,BLADETYPE4-NETWORK-MIB::ufdNewCfgLtMPorts,OCTET,read-only,,current,,The LtM port list. The ports are presented in bitmap format. in receiving order: OCTET 1 OCTET 2 ..... xxxxxxxx xxxxxxxx ..... || || |_ port 8 || || || ||___ port 7 || |____ port 6 || . . . ||_________ port 1 |__________ reserved where x : 1 - The represented port belongs to LtM 0 - The represented port does not belong to LtM
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.2.1.9.1.5,BLADETYPE4-NETWORK-MIB::ufdCurCfgLtMTrunks,OCTET,read-only,,current,,The LtM trunk list. The trunks are presented in bitmap format. in receiving order: OCTET 1 OCTET 2 ..... xxxxxxxx xxxxxxxx ..... || || |_ trunk 8 || || || ||___ trunk 7 || |____ trunk 6 || . . . ||_________ trunk 1 |__________ reserved where x : 1 - The represented trunk belongs to LtM 0 - The represented trunk does not belong to LtM
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.2.1.9.1.6,BLADETYPE4-NETWORK-MIB::ufdNewCfgLtMTrunks,OCTET,read-write,,current,,The LtM trunk list. The trunks are presented in bitmap format. in receiving order: OCTET 1 OCTET 2 ..... xxxxxxxx xxxxxxxx ..... || || |_ trunk 8 || || || ||___ trunk 7 || |____ trunk 6 || . . . ||_________ trunk 1 |__________ reserved where x : 1 - The represented trunk belongs to LtM 0 - The represented trunk does not belong to LtM
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.2.1.9.1.7,BLADETYPE4-NETWORK-MIB::ufdCurCfgLtMAdminkey,INTEGER,read-only,,current,,The LtM admin key.
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.2.1.9.1.8,BLADETYPE4-NETWORK-MIB::ufdNewCfgLtMAdminkey,INTEGER,read-only,,current,,The LtM admin key.
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.2.1.9.1.9,BLADETYPE4-NETWORK-MIB::ufdCurCfgLtDPorts,OCTET,read-only,,current,,The LtD port list. The ports are presented in bitmap format. in receiving order: OCTET 1 OCTET 2 ..... xxxxxxxx xxxxxxxx ..... || || |_ port 8 || || || ||___ port 7 || |____ port 6 || . . . ||_________ port 1 |__________ reserved where x : 1 - The represented port belongs to LtD 0 - The represented port does not belong to LtD
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.2.1.9.1.10,BLADETYPE4-NETWORK-MIB::ufdNewCfgLtDPorts,OCTET,read-only,,current,,The LtD port list. The ports are presented in bitmap format. in receiving order: OCTET 1 OCTET 2 ..... xxxxxxxx xxxxxxxx ..... || || |_ port 8 || || || ||___ port 7 || |____ port 6 || . . . ||_________ port 1 |__________ reserved where x : 1 - The represented port belongs to LtD 0 - The represented port does not belong to LtD
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.2.1.9.1.11,BLADETYPE4-NETWORK-MIB::ufdCurCfgLtDTrunks,OCTET,read-only,,current,,The LtD trunk list. The trunks are presented in bitmap format. in receiving order: OCTET 1 OCTET 2 ..... xxxxxxxx xxxxxxxx ..... || || |_ trunk 8 || || || ||___ trunk 7 || |____ trunk 6 || . . . ||_________ trunk 1 |__________ reserved where x : 1 - The represented trunk belongs to LtD 0 - The represented trunk does not belong to LtD
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.2.1.9.1.12,BLADETYPE4-NETWORK-MIB::ufdNewCfgLtDTrunks,OCTET,read-write,,current,,The LtD trunk list. The trunks are presented in bitmap format. in receiving order: OCTET 1 OCTET 2 ..... xxxxxxxx xxxxxxxx ..... || || |_ trunk 8 || || || ||___ trunk 7 || |____ trunk 6 || . . . ||_________ trunk 1 |__________ reserved where x : 1 - The represented trunk belongs to LtD 0 - The represented trunk does not belong to LtD
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.2.1.9.1.13,BLADETYPE4-NETWORK-MIB::ufdLtDAdminkeyMaxEnt,Integer32,read-only,,current,,The maximum number of rows in the LtD admin key configuration table.
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.2.1.9.1.14,BLADETYPE4-NETWORK-MIB::ufdLtDAdminkeyCurCfgTable,,not-accessible,,current,,The table of LtD admin key configuration.
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.2.1.9.1.14.1,BLADETYPE4-NETWORK-MIB::ufdLtDAdminkeyCurCfgTableEntry,,not-accessible,ufdLtDAdminkeyCurCfg,current,,A row in the LtD admin key table.
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.2.1.9.1.14.1.1,BLADETYPE4-NETWORK-MIB::ufdLtDAdminkeyCurCfg,INTEGER,read-only,,current,,The LtD admin key.
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.2.1.9.1.15,BLADETYPE4-NETWORK-MIB::ufdLtDAdminkeyNewCfgTable,,not-accessible,,current,,The table of LtD admin key configuration.
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.2.1.9.1.15.1,BLADETYPE4-NETWORK-MIB::ufdLtDAdminkeyNewCfgTableEntry,,not-accessible,ufdLtDAdminkeyNewCfg,current,,A row in the LtD admin key table.
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.2.1.9.1.15.1.1,BLADETYPE4-NETWORK-MIB::ufdLtDAdminkeyNewCfg,INTEGER,read-only,,current,,The LtD admin key.
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.2.1.9.1.16,BLADETYPE4-NETWORK-MIB::ufdNewCfgAddLtMPort,Unsigned32,read-write,,current,,The port to be added to LtM. A '0' value is returned when read.
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.2.1.9.1.17,BLADETYPE4-NETWORK-MIB::ufdNewCfgRemoveLtMPort,Unsigned32,read-write,,current,,The port to be removed from LtM. A '0' value is returned when read.
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.2.1.9.1.18,BLADETYPE4-NETWORK-MIB::ufdNewCfgAddLtMTrunk,INTEGER,read-write,,current,,The trunk to be added to LtM. A '0' value is returned when read.
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.2.1.9.1.19,BLADETYPE4-NETWORK-MIB::ufdNewCfgRemoveLtMTrunk,INTEGER,read-write,,current,,The trunk to be removed from LtM. A '0' value is returned when read.
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.2.1.9.1.20,BLADETYPE4-NETWORK-MIB::ufdNewCfgAddLtMAdminkey,INTEGER,read-write,,current,,The admin key to be added to LtM. A '0' value is returned when read.
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.2.1.9.1.21,BLADETYPE4-NETWORK-MIB::ufdNewCfgRemoveLtMAdminkey,INTEGER,read-write,,current,,The admin key to be removed from LtM. A '0' value is returned when read.
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.2.1.9.1.22,BLADETYPE4-NETWORK-MIB::ufdNewCfgAddLtDPort,Unsigned32,read-write,,current,,The port to be added to LtD. A '0' value is returned when read.
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.2.1.9.1.23,BLADETYPE4-NETWORK-MIB::ufdNewCfgRemoveLtDPort,Unsigned32,read-write,,current,,The port to be removed from LtM. A '0' value is returned when read.
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.2.1.9.1.24,BLADETYPE4-NETWORK-MIB::ufdNewCfgAddLtDTrunk,INTEGER,read-write,,current,,The trunk to be added to LtM. A '0' value is returned when read.
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.2.1.9.1.25,BLADETYPE4-NETWORK-MIB::ufdNewCfgRemoveLtDTrunk,INTEGER,read-write,,current,,The trunk to be removed from LtD. A '0' value is returned when read.
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.2.1.9.1.26,BLADETYPE4-NETWORK-MIB::ufdNewCfgAddLtDAdminkey,INTEGER,read-write,,current,,The admin key to be added to LtD. A '0' value is returned when read.
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.2.1.9.1.27,BLADETYPE4-NETWORK-MIB::ufdNewCfgRemoveLtDAdminkey,INTEGER,read-write,,current,,The admin key to be removed from LtD. A '0' value is returned when read.
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.2.1.9.1.28,BLADETYPE4-NETWORK-MIB::ufdCurCfgGlobalState,INTEGER,read-only,,current,enabled(1):disabled(2),Current global Failover settings.
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.2.1.9.1.29,BLADETYPE4-NETWORK-MIB::ufdNewCfgGlobalState,INTEGER,read-write,,current,enabled(1):disabled(2),New global Failover settings.
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.2.1.11,BLADETYPE4-NETWORK-MIB::dot1x,,,,,,
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.2.1.11.1,BLADETYPE4-NETWORK-MIB::dot1xCurStatus,INTEGER,read-only,,current,enable(0):disable(1), Dot1x status 
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.2.1.11.2,BLADETYPE4-NETWORK-MIB::dot1xNewStatus,INTEGER,read-write,,current,enable(0):disable(1), Dot1x status 
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.2.1.11.3,BLADETYPE4-NETWORK-MIB::dot1xCurCfgPortTable,,not-accessible,,current,,The table of 8021x configuration in the Current_config.
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.2.1.11.3.1,BLADETYPE4-NETWORK-MIB::dot1xCurCfgPortEntry,,not-accessible,dot1xCurCfgPortIndex,current,,Information about 8021x Port Config
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.2.1.11.3.1.1,BLADETYPE4-NETWORK-MIB::dot1xCurCfgPortIndex,Unsigned32,read-only,,current,,The 8021x Port number for which the table is related.
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.2.1.11.3.1.2,BLADETYPE4-NETWORK-MIB::dot1xCurCfgPortMode,INTEGER,read-only,,current,forceUnauth(0):auto(1):forceAuth(2), Port authenticaton mode auto(1), forceAuth(2)
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.2.1.11.3.1.3,BLADETYPE4-NETWORK-MIB::dot1xCurCfgPortQtPeriod,INTEGER,read-only,,current,,Quiet period (0-65535) 
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.2.1.11.3.1.4,BLADETYPE4-NETWORK-MIB::dot1xCurCfgPortTxPeriod,INTEGER,read-only,,current,, Tx Period 
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.2.1.11.3.1.5,BLADETYPE4-NETWORK-MIB::dot1xCurCfgPortSupTmout,INTEGER,read-only,,current,, Supplicant timeout (1..65535) 
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.2.1.11.3.1.6,BLADETYPE4-NETWORK-MIB::dot1xCurCfgPortSrvTmout,INTEGER,read-only,,current,, Server timeout (1..65535) 
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.2.1.11.3.1.7,BLADETYPE4-NETWORK-MIB::dot1xCurCfgPortMaxRq,INTEGER,read-only,,current,, Maximum numer of requests (1..10) 
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.2.1.11.3.1.8,BLADETYPE4-NETWORK-MIB::dot1xCurCfgPortRaPeriod,INTEGER,read-only,,current,, Reautentication period (0..604800) 
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.2.1.11.3.1.9,BLADETYPE4-NETWORK-MIB::dot1xCurCfgPortReAuth,INTEGER,read-only,,current,off(0):on(1), ReAuthentication state off(0), on(1)
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.2.1.11.4,BLADETYPE4-NETWORK-MIB::dot1xNewCfgPortTable,,not-accessible,,current,,The table of 8021x configuration in the new_config.
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.2.1.11.4.1,BLADETYPE4-NETWORK-MIB::dot1xNewCfgPortEntry,,not-accessible,dot1xNewCfgPortIndex,current,,Information about 8021x Port Config
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.2.1.11.4.1.1,BLADETYPE4-NETWORK-MIB::dot1xNewCfgPortIndex,Unsigned32,read-only,,current,,The 8021x Port number for which the table is related.
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.2.1.11.4.1.2,BLADETYPE4-NETWORK-MIB::dot1xNewCfgPortMode,INTEGER,read-create,,current,forceUnauth(0):auto(1):forceAuth(2), Port authentication mode  forceAuth(2) 
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.2.1.11.4.1.3,BLADETYPE4-NETWORK-MIB::dot1xNewCfgPortQtPeriod,INTEGER,read-create,,current,, Quiet period (0..65535) 
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.2.1.11.4.1.4,BLADETYPE4-NETWORK-MIB::dot1xNewCfgPortTxPeriod,INTEGER,read-create,,current,, Tx Period (1..65535) 
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.2.1.11.4.1.5,BLADETYPE4-NETWORK-MIB::dot1xNewCfgPortSupTmout,INTEGER,read-create,,current,, Supplicant Timeout (1..65535) 
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.2.1.11.4.1.6,BLADETYPE4-NETWORK-MIB::dot1xNewCfgPortSrvTmout,INTEGER,read-create,,current,, Server Timeout (1..65535) 
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.2.1.11.4.1.7,BLADETYPE4-NETWORK-MIB::dot1xNewCfgPortMaxRq,INTEGER,read-create,,current,, Maximum number of requests (1..10) 
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.2.1.11.4.1.8,BLADETYPE4-NETWORK-MIB::dot1xNewCfgPortRaPeriod,INTEGER,read-create,,current,, Reauthentication period (1..604800) 
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.2.1.11.4.1.9,BLADETYPE4-NETWORK-MIB::dot1xNewCfgPortReAuth,INTEGER,read-create,,current,off(0):on(1), Reauthentication state on(1) 
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.2.1.11.4.1.10,BLADETYPE4-NETWORK-MIB::dot1xNewCfgPortDefault,INTEGER,read-create,,current,other(0):apply(1), Port default settings 
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.2.1.11.4.1.11,BLADETYPE4-NETWORK-MIB::dot1xNewCfgPortApplyGlobal,INTEGER,read-create,,current,other(0):apply(1), Apply Global config 
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.2.1.11.5,BLADETYPE4-NETWORK-MIB::dot1xCurCfgGlobalTable,,,,,,
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.2.1.11.5.1,BLADETYPE4-NETWORK-MIB::dot1xCurCfgGlobalMode,INTEGER,read-only,,current,forceUnauth(0):auto(1):forceAuth(2), Autehtication Mode auto(1), forceAuth(2) 
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.2.1.11.5.2,BLADETYPE4-NETWORK-MIB::dot1xCurCfgGlobalQtPeriod,INTEGER,read-only,,current,, Quiet period (0..65535) 
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.2.1.11.5.3,BLADETYPE4-NETWORK-MIB::dot1xCurCfgGlobalTxPeriod,INTEGER,read-only,,current,, Tx period (1..65535) 
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.2.1.11.5.4,BLADETYPE4-NETWORK-MIB::dot1xCurCfgGlobalSupTmout,INTEGER,read-only,,current,, Supplicant timeout (1..65535) 
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.2.1.11.5.5,BLADETYPE4-NETWORK-MIB::dot1xCurCfgGlobalSrvTmout,INTEGER,read-only,,current,, Server timeout (1..65535) 
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.2.1.11.5.6,BLADETYPE4-NETWORK-MIB::dot1xCurCfgGlobalMaxRq,INTEGER,read-only,,current,, Maximum number of requests (1..10) 
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.2.1.11.5.7,BLADETYPE4-NETWORK-MIB::dot1xCurCfgGlobalRaPeriod,INTEGER,read-only,,current,, Reauthentication period (0..604800) 
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.2.1.11.5.8,BLADETYPE4-NETWORK-MIB::dot1xCurCfgGlobalReAuth,INTEGER,read-only,,current,off(0):on(1), 
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.2.1.11.6,BLADETYPE4-NETWORK-MIB::dot1xNewCfgGlobalTable,,,,,,
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.2.1.11.6.1,BLADETYPE4-NETWORK-MIB::dot1xNewCfgGlobalMode,INTEGER,read-create,,current,forceUnauth(0):auto(1):forceAuth(2), Authentication Mode 
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.2.1.11.6.2,BLADETYPE4-NETWORK-MIB::dot1xNewCfgGlobalQtPeriod,INTEGER,read-create,,current,, Quiet Period (0..65535) 
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.2.1.11.6.3,BLADETYPE4-NETWORK-MIB::dot1xNewCfgGlobalTxPeriod,INTEGER,read-create,,current,, Tx Period (1..65535) 
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.2.1.11.6.4,BLADETYPE4-NETWORK-MIB::dot1xNewCfgGlobalSupTmout,INTEGER,read-create,,current,, Supplicand timeout (1..65535) 
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.2.1.11.6.5,BLADETYPE4-NETWORK-MIB::dot1xNewCfgGlobalSrvTmout,INTEGER,read-create,,current,, Server timeout (1..65535) 
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.2.1.11.6.6,BLADETYPE4-NETWORK-MIB::dot1xNewCfgGlobalMaxRq,INTEGER,read-create,,current,, Maximum number of requests (1..10) 
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.2.1.11.6.7,BLADETYPE4-NETWORK-MIB::dot1xNewCfgGlobalRaPeriod,INTEGER,read-create,,current,, Reauthentication period (1..604800) 
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.2.1.11.6.8,BLADETYPE4-NETWORK-MIB::dot1xNewCfgGlobalReAuth,INTEGER,read-create,,current,off(0):on(1), Reauthentication status 
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.2.1.11.6.9,BLADETYPE4-NETWORK-MIB::dot1xNewCfgGlobalDefault,INTEGER,read-create,,current,other(0):apply(1), Restore default 802.1x configuration 
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.2.1.12,BLADETYPE4-NETWORK-MIB::fdb,,,,,,
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.2.1.12.1,BLADETYPE4-NETWORK-MIB::fdbGeneralCfg,,,,,,
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.2.1.12.1.1,BLADETYPE4-NETWORK-MIB::fdbCurCfgAgingTime,Integer32,read-only,,current,,Fdb current aging time
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.2.1.12.1.2,BLADETYPE4-NETWORK-MIB::fdbNewCfgAgingTime,Integer32,read-write,,current,,Fdb new aging time.
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.2.1.12.2,BLADETYPE4-NETWORK-MIB::fdbNewCfgStaticTable,,not-accessible,,current,,The table of FDB static entries.
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.2.1.12.2.1,BLADETYPE4-NETWORK-MIB::fdbNewCfgStaticEntry,,not-accessible,fdbNewCfgEntryIndex,current,,A row in the fdb table.
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.2.1.12.2.1.1,BLADETYPE4-NETWORK-MIB::fdbNewCfgEntryIndex,Integer32,read-only,,current,,The fdb entry index
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.2.1.12.2.1.2,BLADETYPE4-NETWORK-MIB::fdbNewCfgAddVlan,Integer32,read-create,,current,,Add vlan for fdb entry index
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.2.1.12.2.1.3,BLADETYPE4-NETWORK-MIB::fdbNewCfgAddPort,Unsigned32,read-create,,current,,The MAC address port number.
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.2.1.12.2.1.4,BLADETYPE4-NETWORK-MIB::fdbNewCfgAddMac,OCTET,read-create,,current,,Add a fdb entry.
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.2.1.12.2.1.5,BLADETYPE4-NETWORK-MIB::fdbNewCfgDelStaticEntry,INTEGER,read-create,,current,other(1):delete(2),When set to the value of 2 (delete), the entire row is deleted. When read, other(1) is returned. Setting the value to anything other than 2(delete) has no effect on the state of the row.
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.2.1.12.3,BLADETYPE4-NETWORK-MIB::fdbCurCfgStaticTable,,not-accessible,,current,,The table of FDB static entries.
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.2.1.12.3.1,BLADETYPE4-NETWORK-MIB::fdbCurCfgStaticEntry,,not-accessible,fdbCurCfgEntryIndex,current,,A row in the fdb table.
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.2.1.12.3.1.1,BLADETYPE4-NETWORK-MIB::fdbCurCfgEntryIndex,Integer32,read-only,,current,,The fdb entry index
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.2.1.12.3.1.2,BLADETYPE4-NETWORK-MIB::fdbCurCfgVlan,Integer32,read-only,,current,,Add vlan for fdb entry index
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.2.1.12.3.1.3,BLADETYPE4-NETWORK-MIB::fdbCurCfgPort,Unsigned32,read-only,,current,,The MAC address port number.
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.2.1.12.3.1.4,BLADETYPE4-NETWORK-MIB::fdbCurCfgMac,OCTET,read-only,,current,,Add a fdb entry.
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.2.2,BLADETYPE4-NETWORK-MIB::layer2Stats,,,,,,
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.2.2.1,BLADETYPE4-NETWORK-MIB::fdbStats,,,,,,
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.2.2.1.3,BLADETYPE4-NETWORK-MIB::fdbStatsCurrent,Gauge32,read-only,,current,,Current number of entries in the Forwarding Database.
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.2.2.1.4,BLADETYPE4-NETWORK-MIB::fdbStatsHiwat,Integer32,read-only,,current,,Highest number of entries recorded at any given time in the  Forwarding Database.
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.2.2.1.11,BLADETYPE4-NETWORK-MIB::fdbStatsClear,INTEGER,read-write,,current,ok(1):clear(2),Clear FDB statistics
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.2.2.2,BLADETYPE4-NETWORK-MIB::stpStats,,,,,,
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.2.2.2.1,BLADETYPE4-NETWORK-MIB::stgStatsPortTable,,not-accessible,,current,,The table of Spanning Tree Group port statistics.
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.2.2.2.1.1,BLADETYPE4-NETWORK-MIB::stgStatsPortTableEntry,,not-accessible,stgStatsStpIndex:stgStatsPortIndex,current,,Statistics about port of a particular Spanning Tree Group.
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.2.2.2.1.1.1,BLADETYPE4-NETWORK-MIB::stgStatsStpIndex,Integer32,read-only,,current,,The identifier of a particular Spanning Tree Group.
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.2.2.2.1.1.2,BLADETYPE4-NETWORK-MIB::stgStatsPortIndex,Unsigned32,read-only,,current,,The port identifier of a particular Spanning Tree Group.
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.2.2.2.1.1.3,BLADETYPE4-NETWORK-MIB::stgStatsPortRcvCfgBpdus,Counter32,read-only,,current,,Number of Configuration BPDU's received on this port.
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.2.2.2.1.1.4,BLADETYPE4-NETWORK-MIB::stgStatsPortRcvTcnBpdus,Counter32,read-only,,current,,Number of TCN BPDU's received on this port.
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.2.2.2.1.1.5,BLADETYPE4-NETWORK-MIB::stgStatsPortXmtCfgBpdus,Counter32,read-only,,current,,Number of Configuration BPDU's trasmitted from the port.
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.2.2.2.1.1.6,BLADETYPE4-NETWORK-MIB::stgStatsPortXmtTcnBpdus,Counter32,read-only,,current,,Number of TCN BPDU's trasmitted from the port.
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.2.2.3,BLADETYPE4-NETWORK-MIB::lacpStats,,,,,,
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.2.2.3.1,BLADETYPE4-NETWORK-MIB::lacpStatsTable,,not-accessible,,current,,The table of LACP Stats.
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.2.2.3.1.1,BLADETYPE4-NETWORK-MIB::lacpStatsTableEntry,,not-accessible,lacpStatsIndex,current,,Lacp status info.
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.2.2.3.1.1.1,BLADETYPE4-NETWORK-MIB::lacpStatsIndex,Unsigned32,read-only,,current,,Index
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.2.2.3.1.1.2,BLADETYPE4-NETWORK-MIB::lacpdusRx,Integer32,read-only,,current,,Valid LACPDUs received
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.2.2.3.1.1.3,BLADETYPE4-NETWORK-MIB::markerpdusRx,Integer32,read-only,,current,,Valid Marker PDUs received
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.2.2.3.1.1.4,BLADETYPE4-NETWORK-MIB::markerresponsepdusRx,Integer32,read-only,,current,,Valid Marker Rsp PDUs received
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.2.2.3.1.1.5,BLADETYPE4-NETWORK-MIB::unknownRx,Integer32,read-only,,current,,Unknown version/TLV type
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.2.2.3.1.1.6,BLADETYPE4-NETWORK-MIB::illegalRx,Integer32,read-only,,current,,Illegal subtype received
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.2.2.3.1.1.7,BLADETYPE4-NETWORK-MIB::lacpdusTx,Integer32,read-only,,current,,LACPDUs transmitted
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.2.2.3.1.1.8,BLADETYPE4-NETWORK-MIB::markerpdusTx,Integer32,read-only,,current,,Market PDUs transmitted
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.2.2.3.1.1.9,BLADETYPE4-NETWORK-MIB::markerresponsepdusTx,Integer32,read-only,,current,,Marker Rsp PDUs transmitted 
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.2.2.3.1.1.10,BLADETYPE4-NETWORK-MIB::lacpClearStats,INTEGER,read-write,,current,ok(1):clear(2),Setting this to clear(2) results in clearing the LACP statistics.
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.2.2.4,BLADETYPE4-NETWORK-MIB::ufdStats,,,,,,
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.2.2.4.1,BLADETYPE4-NETWORK-MIB::ufdNoLtMLinkFailure,Integer32,read-only,,current,, 
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.2.2.4.2,BLADETYPE4-NETWORK-MIB::ufdNoLtMLinkBlockingState,Integer32,read-only,,current,, 
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.2.2.4.3,BLADETYPE4-NETWORK-MIB::ufdNoLtDAutoDisabled,Integer32,read-only,,current,, 
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.2.2.4.4,BLADETYPE4-NETWORK-MIB::ufdClearStats,INTEGER,read-write,,current,ok(1):clear(2), Setting this value to clear(2) clears the UFD stats.
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.2.3,BLADETYPE4-NETWORK-MIB::layer2Info,,,,,,
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.2.3.1,BLADETYPE4-NETWORK-MIB::cistInfo,,,,,,
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.2.3.1.1,BLADETYPE4-NETWORK-MIB::cistGeneralInfo,,,,,,
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.2.3.1.1.1,BLADETYPE4-NETWORK-MIB::cistRoot,OCTET,read-only,,current,,The bridge identifier of the Root of the common spanning tree as determined by the Spanning Tree Protocol as executed by this node. This value is used as the CIST Root Identifier parameter in all Configuration Bridge PDUs originated by this node.
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.2.3.1.1.2,BLADETYPE4-NETWORK-MIB::cistRootPathCost,Integer32,read-only,,current,,The cost of the path to the CIST Root as seen from this bridge.
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.2.3.1.1.3,BLADETYPE4-NETWORK-MIB::cistRootPort,Unsigned32,read-only,,current,,The Port Number of the Port which offers the lowest path cost from  this bridge to the CIST Root Bridge.
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.2.3.1.1.4,BLADETYPE4-NETWORK-MIB::cistRootHelloTime,Integer32,read-only,,current,,The amount of time between the transmission of Configuration bridge PDUs in seconds.
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.2.3.1.1.5,BLADETYPE4-NETWORK-MIB::cistRootMaxAge,Integer32,read-only,,current,,The value in seconds that all bridges use for MaxAge when this bridge is acting as the root.
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.2.3.1.1.6,BLADETYPE4-NETWORK-MIB::cistRootForwardDelay,Integer32,read-only,,current,,The value in seconds that all bridges use for ForwardDelay when this  bridge is acting as the root.
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.2.3.1.1.7,BLADETYPE4-NETWORK-MIB::cistRegionalRoot,OCTET,read-only,,current,,The bridge identifier of the Root of the Multiple spanning tree region as determined by the Spanning Tree Protocol as executed by this node. This value is used as the CIST Regional Root Identifier parameter in all Configuration Bridge PDUs originated by this node.
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.2.3.1.1.8,BLADETYPE4-NETWORK-MIB::cistRegionalPathCost,Integer32,read-only,,current,,The Cost of the path to the CIST Regional Root as seen from this  bridge.
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.2.3.1.1.9,BLADETYPE4-NETWORK-MIB::cistBridgePriority,INTEGER,read-only,,current,,The value of the writable portion of the Brigde Identifier comprising of the first two octets.
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.2.3.1.1.10,BLADETYPE4-NETWORK-MIB::cistBridgeMaxAge,INTEGER,read-only,,current,,The value in seconds that all bridges use for MaxAge when this bridge is acting as the root.
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.2.3.1.1.11,BLADETYPE4-NETWORK-MIB::cistBridgeForwardDelay,INTEGER,read-only,,current,,The value in seconds that all bridges use for ForwardDelay when this  bridge is acting as the root.
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.2.3.1.1.12,BLADETYPE4-NETWORK-MIB::cistMaxHopCount,INTEGER,read-only,,current,,Indicates the maximum hop count value.
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.2.3.1.1.13,BLADETYPE4-NETWORK-MIB::mstpDigest,OCTET,read-only,,current,,The digest of the mstp.
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.2.3.1.2,BLADETYPE4-NETWORK-MIB::cistInfoPortTable,,not-accessible,,current,,The table of CIST Port information.
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.2.3.1.2.1,BLADETYPE4-NETWORK-MIB::cistInfoPortTableEntry,,not-accessible,cistInfoPortIndex,current,,Information about a particular CIST Port.
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.2.3.1.2.1.1,BLADETYPE4-NETWORK-MIB::cistInfoPortIndex,Unsigned32,read-only,,current,,The port number of the port for which this entry contains spanning tree configuration.
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.2.3.1.2.1.2,BLADETYPE4-NETWORK-MIB::cistInfoPortPriority,Integer32,read-only,,current,,The four most significant bits of the Port Identifier of the  Spanning Tree instance can be modified by setting this value.
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.2.3.1.2.1.3,BLADETYPE4-NETWORK-MIB::cistInfoPortPathCost,Integer32,read-only,,current,,The contribution of this port to the path cost of paths towards  the CIST Root which include this port.
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.2.3.1.2.1.4,BLADETYPE4-NETWORK-MIB::cistInfoPortState,INTEGER,read-only,,current,disabled(1):discarding(2):learning(4):forwarding(5),Current state of the Port as defined by the Common  spanning tree protocol.
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.2.3.1.2.1.5,BLADETYPE4-NETWORK-MIB::cistInfoPortRole,INTEGER,read-only,,current,disabled(1):alternate(2):backup(3):root(4):designated(5):master(6):unknown(7),Selected Port Role of the port for this spanning tree instance.
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.2.3.1.2.1.6,BLADETYPE4-NETWORK-MIB::cistInfoPortDesignatedBridge,OCTET,read-only,,current,,The unique Bridge Identifier of the bridge which this port  considers to be the Designated Bridge for the port's segment.
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.2.3.1.2.1.7,BLADETYPE4-NETWORK-MIB::cistInfoPortDesignatedPort,OCTET,read-only,,current,,The Port identifier of the port on the Designated Bridge  for this port's segment.
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.2.3.1.2.1.8,BLADETYPE4-NETWORK-MIB::cistInfoPortLinkType,INTEGER,read-only,,current,p2p(1):shared(2):unknown(3),The point-to-point status of the LAN segment attached  to this port. A value of p2p (2) indicates that this port is being treated as if it is connected to a point-to-point link.  A value of shared(3) indicates that this port is being treated as  having a shared media connection.
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.2.3.1.2.1.9,BLADETYPE4-NETWORK-MIB::cistInfoPortHelloTime,INTEGER,read-only,,current,,The amount of time between the transmission of Configuration Port  PDUs in seconds.
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.2.3.2,BLADETYPE4-NETWORK-MIB::fdbInfo,,,,,,
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.2.3.2.1,BLADETYPE4-NETWORK-MIB::fdbClear,INTEGER,read-write,,current,ok(1):clear(2),Setting this value to clear(2) clears the entire master FDB.
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.2.3.2.2,BLADETYPE4-NETWORK-MIB::fdbTable,,not-accessible,,current,,The table of FDB entries.
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.2.3.2.2.1,BLADETYPE4-NETWORK-MIB::fdbEntry,,not-accessible,fdbMacAddr,current,,A row in the FDB table
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.2.3.2.2.1.1,BLADETYPE4-NETWORK-MIB::fdbMacAddr,OCTET,read-only,,current,,The MAC address for the FDB entry.
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.2.3.2.2.1.2,BLADETYPE4-NETWORK-MIB::fdbVlan,Integer32,read-only,,current,,The VLAN ID for the FDB entry.
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.2.3.2.2.1.3,BLADETYPE4-NETWORK-MIB::fdbSrcPort,Unsigned32,read-only,,current,,Either the value '0', or the port number of the port on which a frame  having a source address equal to the value of the corresponding  instance has been seen. A value of '0' indicates that the port  number has not been learned but that the bridge does have some forwarding/filtering information about this address.
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.2.3.2.2.1.4,BLADETYPE4-NETWORK-MIB::fdbState,INTEGER,read-only,,current,unknown(1):forward(2):trunk(3),The state of the FDB entry. The meanings of the values are : unknown(1) : the MAC address has not yet been learned by the switch but has only been seen as a destination address forward(2) : the MAC address has been learned by the switch trunk(3) : frames with this MAC address are forwarded to trunk group
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.2.3.2.2.1.7,BLADETYPE4-NETWORK-MIB::fdbSrcTrunk,Integer32,read-only,,current,,Either the value '0', or the trunk number of the trunk on which a frame having a source address equal to the value of the corresponding instance has been seen. A value of '0' indicates that the source address is not associated with a trunk.
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.2.3.2.2.1.8,BLADETYPE4-NETWORK-MIB::fdbStatus,Integer32,read-only,,current,,'1' if it is permanent  '0' if it is not permanent
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.2.3.3,BLADETYPE4-NETWORK-MIB::stpInfo,,,,,,
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.2.3.3.1,BLADETYPE4-NETWORK-MIB::stpInfoTable,,not-accessible,,current,,The table of Spanning Tree Group information.
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.2.3.3.1.1,BLADETYPE4-NETWORK-MIB::stpInfoTableEntry,,not-accessible,stpInfoIndex,current,,Information about a particular Spanning Tree Group.
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.2.3.3.1.1.1,BLADETYPE4-NETWORK-MIB::stpInfoIndex,Integer32,read-only,,current,,The identifier of a particular Spanning Tree Group. This is also index to the entLogicalTable of Entity MIB.
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.2.3.3.1.1.2,BLADETYPE4-NETWORK-MIB::stpInfoState,INTEGER,read-only,,current,on(1):off(2),Turn on of off Spanning Tree operation of a particular Spanning Tree Group.
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.2.3.3.1.1.3,BLADETYPE4-NETWORK-MIB::stgInfoVlanBmap,OCTET,read-only,,current,,The vlans applied to the spanning tree group. The vlans are  presented in bitmap format. This string displays vlan number from 1 to 4096. in receiving order: OCTET 1 OCTET 2 ..... xxxxxxxx xxxxxxxx .....  || || |_ vlan 9 || ||  || ||___ vlan 8 || |____ vlan 7 || . . . ||_________ vlan 2 |__________ vlan 1 (as index to stgCurCfgTable) where x : 1 - The represented vlan applied to the spanning tree.  0 - The represented vlan not applied to the spanning tree
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.2.3.3.1.1.4,BLADETYPE4-NETWORK-MIB::stpInfoTimeSinceTopChange,TimeTicks,read-only,,current,,The time (in hundredths of a second) since the last time a topology  change was detected by the bridge entity.
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.2.3.3.1.1.5,BLADETYPE4-NETWORK-MIB::stpInfoTopChanges,Counter32,read-only,,current,,The total number of topology changes detected by this bridge since  the management entity was last reset or initialized.
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.2.3.3.1.1.6,BLADETYPE4-NETWORK-MIB::stpInfoDesignatedRoot,OCTET,read-only,,current,,The bridge identifier of the root of the spanning tree as determined  by the Spanning Tree Protocol as executed by this node. This value  is used as the Root Identifier parameter in all Configuration Bridge  PDUs originated by this node.
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.2.3.3.1.1.7,BLADETYPE4-NETWORK-MIB::stpInfoRootCost,Integer32,read-only,,current,,The cost of the path to the root as seen from this bridge.
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.2.3.3.1.1.8,BLADETYPE4-NETWORK-MIB::stpInfoRootPort,Unsigned32,read-only,,current,,The port number of the port which offers the lowest cost path from  this bridge to the root bridge.
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.2.3.3.1.1.9,BLADETYPE4-NETWORK-MIB::stpInfoMaxAge,Integer32,read-only,,current,,The maximum age of Spanning Tree Protocol information learned from  the network on any port before it is discarded, in units of  hundredths of a second. This is the actual value that this bridge is currently using.
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.2.3.3.1.1.10,BLADETYPE4-NETWORK-MIB::stpInfoHelloTime,Integer32,read-only,,current,,The amount of time between the transmission of Configuration bridge  PDUs by this node on any port when it is the root of the spanning  tree or trying to become so, in units of hundredths of a second. This is the actual value that this bridge is currently using.
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.2.3.3.1.1.11,BLADETYPE4-NETWORK-MIB::stpInfoForwardDelay,Integer32,read-only,,current,,This time value, measured in units of hundredths of a second,  controls how fast a port changes its spanning state when moving  towards the Forwarding state. The value determines how long the port stays in each of the Listening and Learning states, which precede  the Forwarding state. This value is also used, when a topology  change has been detected and is underway, to age all dynamic entries in the Forwarding Database.
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.2.3.3.1.1.12,BLADETYPE4-NETWORK-MIB::stpInfoHoldTime,Integer32,read-only,,current,,This time value determines the interval length during which no more  than two Configuration bridge PDUs shall be transmitted by this node, in units of hundredths of a second.
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.2.3.3.1.1.13,BLADETYPE4-NETWORK-MIB::stpInfoBrgPriority,INTEGER,read-only,,current,,The value of the write-able portion of the Bridge ID, i.e., the first two octets of the (8 octet long) Bridge ID.
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.2.3.3.1.1.14,BLADETYPE4-NETWORK-MIB::stpInfoBrgHelloTime,INTEGER,read-only,,current,,The value in seconds that all bridges use for HelloTime when this  bridge is acting as the root.
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.2.3.3.1.1.15,BLADETYPE4-NETWORK-MIB::stpInfoBrgForwardDelay,INTEGER,read-only,,current,,The value in seconds that all bridges use for ForwardDelay when this  bridge is acting as the root.
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.2.3.3.1.1.16,BLADETYPE4-NETWORK-MIB::stpInfoBrgMaxAge,INTEGER,read-only,,current,,The value in seconds that all bridges use for MaxAge when this bridge is acting as the root.
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.2.3.3.1.1.17,BLADETYPE4-NETWORK-MIB::stpInfoAgingTime,INTEGER,read-only,,current,,The timeout period in seconds for aging out dynamically learned  forwarding information.
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.2.3.3.2,BLADETYPE4-NETWORK-MIB::stpInfoPortTable,,not-accessible,,current,,The table of Spanning Tree Group port information.
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.2.3.3.2.1,BLADETYPE4-NETWORK-MIB::stpInfoPortTableEntry,,not-accessible,stpInfoPortStpIndex:stpInfoPortIndex,current,,Information about port configuration for a particular Spanning Tree Group.
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.2.3.3.2.1.1,BLADETYPE4-NETWORK-MIB::stpInfoPortStpIndex,Integer32,read-only,,current,,The identifier of a particular Spanning Tree Group.
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.2.3.3.2.1.2,BLADETYPE4-NETWORK-MIB::stpInfoPortIndex,Unsigned32,read-only,,current,,The port identifier of a particular Spanning Tree Group.
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.2.3.3.2.1.3,BLADETYPE4-NETWORK-MIB::stpInfoPortState,INTEGER,read-only,,current,disabled(1):blocking(2):listening(3):learning(4):forwarding(5):broken(6),The port's current state as defined by application of the Spanning  Tree Protocol. This state controls what action a port takes on reception of a frame. If the bridge has detected a port that is  malfunctioning it will place that port into the broken(6) state.  For ports which are disabled, this object will have a value of  disabled(1).
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.2.3.3.2.1.4,BLADETYPE4-NETWORK-MIB::stpInfoPortDesignatedRoot,OCTET,read-only,,current,,The unique Bridge Identifier of the Bridge recorded as the Root in  the Configuration BPDUs transmitted by the Designated Bridge for the segment to which the port is attached.
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.2.3.3.2.1.5,BLADETYPE4-NETWORK-MIB::stpInfoPortDesignatedCost,Integer32,read-only,,current,,The path cost of the Designated Port of the segment connected to this port. This value is compared to the Root Path Cost field in received bridge PDUs.
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.2.3.3.2.1.6,BLADETYPE4-NETWORK-MIB::stpInfoPortDesignatedBridge,OCTET,read-only,,current,,The Bridge Identifier of the bridge which this port considers to be  the Designated Bridge for this port's segment.
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.2.3.3.2.1.7,BLADETYPE4-NETWORK-MIB::stpInfoPortDesignatedPort,OCTET,read-only,,current,,The Port Identifier of the port on the Designated Bridge for this  port's segment.
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.2.3.3.2.1.8,BLADETYPE4-NETWORK-MIB::stpInfoPortForwardTransitions,Counter32,read-only,,current,,The number of times this port has transitioned from the Learning  state to the Forwarding state.
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.2.3.3.2.1.9,BLADETYPE4-NETWORK-MIB::stpInfoPortPathCost,Integer32,read-only,,current,,The path cost of the port.
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.2.3.4,BLADETYPE4-NETWORK-MIB::lacpInfo,,,,,,
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.2.3.4.1,BLADETYPE4-NETWORK-MIB::lacpInfoAggrTable,,not-accessible,,current,,The table of LACP aggregator information.
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.2.3.4.1.1,BLADETYPE4-NETWORK-MIB::lacpInfoAggrTableEntry,,not-accessible,lacpInfoAggrIndex,current,,Information about a LACP aggregator.
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.2.3.4.1.1.1,BLADETYPE4-NETWORK-MIB::lacpInfoAggrIndex,Unsigned32,read-only,,current,,The aggregator identifier.
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.2.3.4.1.1.2,BLADETYPE4-NETWORK-MIB::lacpInfoAggrId,Integer32,read-only,,current,,
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.2.3.4.1.1.3,BLADETYPE4-NETWORK-MIB::lacpInfoAggrMac,OCTET,read-only,,current,,
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.2.3.4.1.1.4,BLADETYPE4-NETWORK-MIB::lacpInfoAggrActSysPrio,Integer32,read-only,,current,,
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.2.3.4.1.1.5,BLADETYPE4-NETWORK-MIB::lacpInfoAggrActSysId,OCTET,read-only,,current,,
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.2.3.4.1.1.6,BLADETYPE4-NETWORK-MIB::lacpInfoAggrIndivState,INTEGER,read-only,,current,true(1):false(2),
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.2.3.4.1.1.7,BLADETYPE4-NETWORK-MIB::lacpInfoAggrActAdminKey,Integer32,read-only,,current,,
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.2.3.4.1.1.8,BLADETYPE4-NETWORK-MIB::lacpInfoAggrActOperKey,Integer32,read-only,,current,,
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.2.3.4.1.1.9,BLADETYPE4-NETWORK-MIB::lacpInfoAggrPartSysPrio,Integer32,read-only,,current,,
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.2.3.4.1.1.10,BLADETYPE4-NETWORK-MIB::lacpInfoAggrPartSysId,OCTET,read-only,,current,,
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.2.3.4.1.1.11,BLADETYPE4-NETWORK-MIB::lacpInfoAggrPartOperKey,Integer32,read-only,,current,,
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.2.3.4.1.1.12,BLADETYPE4-NETWORK-MIB::lacpInfoAggrReadyState,INTEGER,read-only,,current,true(1):false(2),
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.2.3.4.1.1.13,BLADETYPE4-NETWORK-MIB::lacpInfoAggrNumPorts,Integer32,read-only,,current,,
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.2.3.4.1.1.14,BLADETYPE4-NETWORK-MIB::lacpInfoAggrPorts,OCTET,read-only,,current,,
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.2.3.4.2,BLADETYPE4-NETWORK-MIB::lacpInfoPort,,,,,,
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.2.3.4.2.1,BLADETYPE4-NETWORK-MIB::lacpInfoPortGeneralTable,,not-accessible,,current,,The table of LACP port general information.
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.2.3.4.2.1.1,BLADETYPE4-NETWORK-MIB::lacpInfoPortGeneralTableEntry,,not-accessible,lacpInfoPortGeneralIndex,current,,General information about a LACP port.
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.2.3.4.2.1.1.1,BLADETYPE4-NETWORK-MIB::lacpInfoPortGeneralIndex,Unsigned32,read-only,,current,,The port identifier.
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.2.3.4.2.1.1.2,BLADETYPE4-NETWORK-MIB::lacpInfoPortLacpEna,INTEGER,read-only,,current,true(1):false(2),
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.2.3.4.2.1.1.3,BLADETYPE4-NETWORK-MIB::lacpInfoPortAdminEna,INTEGER,read-only,,current,true(1):false(2),
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.2.3.4.2.1.1.4,BLADETYPE4-NETWORK-MIB::lacpInfoPortActSysId,OCTET,read-only,,current,,
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.2.3.4.2.1.1.5,BLADETYPE4-NETWORK-MIB::lacpInfoPortActSysPrio,Integer32,read-only,,current,,
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.2.3.4.2.1.1.6,BLADETYPE4-NETWORK-MIB::lacpInfoPortActAdminKey,Integer32,read-only,,current,,
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.2.3.4.2.1.1.7,BLADETYPE4-NETWORK-MIB::lacpInfoPortActOperKey,Integer32,read-only,,current,,
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.2.3.4.2.1.1.8,BLADETYPE4-NETWORK-MIB::lacpInfoPortActPortNum,Integer32,read-only,,current,,
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.2.3.4.2.1.1.9,BLADETYPE4-NETWORK-MIB::lacpInfoPortActPortPrio,Integer32,read-only,,current,,
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.2.3.4.2.1.1.10,BLADETYPE4-NETWORK-MIB::lacpInfoPortIndivState,INTEGER,read-only,,current,true(1):false(2),
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.2.3.4.2.1.1.11,BLADETYPE4-NETWORK-MIB::lacpInfoSelAggrId,Integer32,read-only,,current,,
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.2.3.4.2.1.1.12,BLADETYPE4-NETWORK-MIB::lacpInfoAttAggrId,Integer32,read-only,,current,,
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.2.3.4.2.1.1.13,BLADETYPE4-NETWORK-MIB::lacpInfoPortReadyN,INTEGER,read-only,,current,true(1):false(2),True value for Ready_N flag indicates that the wait while timer  has expired and it is waiting to attach to an aggregator.  There is one Ready_N value for each port.
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.2.3.4.2.1.1.14,BLADETYPE4-NETWORK-MIB::lacpInfoPortNtt,INTEGER,read-only,,current,true(1):false(2),Need to transmit flag. True indicates that there is new protocol  information that should be transmitted on the link.
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.2.3.4.2.1.1.15,BLADETYPE4-NETWORK-MIB::lacpInfoPortSelected,INTEGER,read-only,,current,selected(1):unselected(2):standby(3),Selected flag value indicates that the selection logic has selected an appropriate Aggregator. A value of unselected indicates that no  aggregator is currently selected. A value of standby indicates that although the selection logic has selected an appropriate Aggregator, aggregation restrictions currently precent the port from being  enabled as part of the aggregation, and so the port is being held in standby condition.
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.2.3.4.2.1.1.16,BLADETYPE4-NETWORK-MIB::lacpInfoPortMoved,INTEGER,read-only,,current,true(1):false(2),Port Moved flag is set to true if the receive machine for a port  is in the port_disabled state, and the combination of partner oper system and partner oper port number in use by the port has been  used by received in an incoming LACPDU on a different port.
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.2.3.4.2.1.1.17,BLADETYPE4-NETWORK-MIB::lacpInfoCollDetState,INTEGER,read-only,,current,on(1):off(2),
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.2.3.4.2.1.1.18,BLADETYPE4-NETWORK-MIB::lacpInfoPortRxState,OCTET,read-only,,current,,
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.2.3.4.2.1.1.19,BLADETYPE4-NETWORK-MIB::lacpInfoPortMuxState,OCTET,read-only,,current,,
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.2.3.4.2.1.1.20,BLADETYPE4-NETWORK-MIB::lacpInfoPortPerState,OCTET,read-only,,current,,
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.2.3.4.2.1.1.21,BLADETYPE4-NETWORK-MIB::lacpInfoPortPerTraTimer,Integer32,read-only,,current,,Periodic Transmit Timer
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.2.3.4.2.1.1.22,BLADETYPE4-NETWORK-MIB::lacpInfoPortCurWhileTimer,Integer32,read-only,,current,,Current While Timer
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.2.3.4.2.1.1.23,BLADETYPE4-NETWORK-MIB::lacpInfoPortOperState,INTEGER,read-only,,current,disabled(1):up(2):down(3),The current operational state of LACP on the port.
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.2.3.4.2.2,BLADETYPE4-NETWORK-MIB::lacpInfoPortAdminTable,,not-accessible,,current,,The table of LACP port admin information.
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.2.3.4.2.2.1,BLADETYPE4-NETWORK-MIB::lacpInfoPortAdminTableEntry,,not-accessible,lacpInfoPortAdminIndex,current,,Admin information about a LACP port.
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.2.3.4.2.2.1.1,BLADETYPE4-NETWORK-MIB::lacpInfoPortAdminIndex,Unsigned32,read-only,,current,,The port identifier.
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.2.3.4.2.2.1.7,BLADETYPE4-NETWORK-MIB::lacpInfoPortActAdPortState,OCTET,read-only,,current,,The state of Actor Administrator Port. This is a octet mask with the following bits: Activity, Synchronization, Defaulted,  Timeout, Collecting, Expired, Aggregation and Distributing. If all of them are 0 then the state is showed as 0x0, else it is displayed a blank state which mean is not a NULL state
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.2.3.4.2.2.1.8,BLADETYPE4-NETWORK-MIB::lacpInfoPortActAdActiv,INTEGER,read-only,,current,active(1):passive(2),
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.2.3.4.2.2.1.9,BLADETYPE4-NETWORK-MIB::lacpInfoPortActAdSync,INTEGER,read-only,,current,true(1):false(2),
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.2.3.4.2.2.1.10,BLADETYPE4-NETWORK-MIB::lacpInfoPortActAdDef,INTEGER,read-only,,current,true(1):false(2),
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.2.3.4.2.2.1.11,BLADETYPE4-NETWORK-MIB::lacpInfoPortActAdTimeout,INTEGER,read-only,,current,short(1):long(2),
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.2.3.4.2.2.1.12,BLADETYPE4-NETWORK-MIB::lacpInfoPortActAdColl,INTEGER,read-only,,current,true(1):false(2),
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.2.3.4.2.2.1.13,BLADETYPE4-NETWORK-MIB::lacpInfoPortActAdExp,INTEGER,read-only,,current,true(1):false(2),
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.2.3.4.2.2.1.14,BLADETYPE4-NETWORK-MIB::lacpInfoPortActAdAggr,INTEGER,read-only,,current,true(1):false(2),
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.2.3.4.2.2.1.15,BLADETYPE4-NETWORK-MIB::lacpInfoPortActAdDist,INTEGER,read-only,,current,true(1):false(2),
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.2.3.4.2.3,BLADETYPE4-NETWORK-MIB::lacpInfoPortOperTable,,not-accessible,,current,,The table of LACP port oper information.
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.2.3.4.2.3.1,BLADETYPE4-NETWORK-MIB::lacpInfoPortOperTableEntry,,not-accessible,lacpInfoPortOperIndex,current,,Oper information about a LACP port.
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.2.3.4.2.3.1.1,BLADETYPE4-NETWORK-MIB::lacpInfoPortOperIndex,Unsigned32,read-only,,current,,The port identifier.
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.2.3.4.2.3.1.2,BLADETYPE4-NETWORK-MIB::lacpInfoPortPartOpSysPrio,Integer32,read-only,,current,,
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.2.3.4.2.3.1.3,BLADETYPE4-NETWORK-MIB::lacpInfoPortPartOpSysId,OCTET,read-only,,current,,
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.2.3.4.2.3.1.4,BLADETYPE4-NETWORK-MIB::lacpInfoPortPartOpKey,Integer32,read-only,,current,,
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.2.3.4.2.3.1.5,BLADETYPE4-NETWORK-MIB::lacpInfoPortPartOpPortNum,Integer32,read-only,,current,,
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.2.3.4.2.3.1.6,BLADETYPE4-NETWORK-MIB::lacpInfoPortPartOpPortPrio,Integer32,read-only,,current,,
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.2.3.4.2.3.1.7,BLADETYPE4-NETWORK-MIB::lacpInfoPortActOpPortState,OCTET,read-only,,current,,The state of Actor Operator Port. This is a octet mask with the following bits: Activity, Synchronization, Defaulted,  Timeout, Collecting, Expired, Aggregation and Distributing. If all of them are 0 then the state is showed as 0x0, else it is displayed a blank state which mean is not a NULL state
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.2.3.4.2.3.1.8,BLADETYPE4-NETWORK-MIB::lacpInfoPortActOpActiv,INTEGER,read-only,,current,active(1):passive(2),
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.2.3.4.2.3.1.9,BLADETYPE4-NETWORK-MIB::lacpInfoPortActOpSync,INTEGER,read-only,,current,true(1):false(2),
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.2.3.4.2.3.1.10,BLADETYPE4-NETWORK-MIB::lacpInfoPortActOpDef,INTEGER,read-only,,current,true(1):false(2),
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.2.3.4.2.3.1.11,BLADETYPE4-NETWORK-MIB::lacpInfoPortActOpTimeout,INTEGER,read-only,,current,short(1):long(2),
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.2.3.4.2.3.1.12,BLADETYPE4-NETWORK-MIB::lacpInfoPortActOpColl,INTEGER,read-only,,current,true(1):false(2),
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.2.3.4.2.3.1.13,BLADETYPE4-NETWORK-MIB::lacpInfoPortActOpExp,INTEGER,read-only,,current,true(1):false(2),
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.2.3.4.2.3.1.14,BLADETYPE4-NETWORK-MIB::lacpInfoPortActOpAggr,INTEGER,read-only,,current,true(1):false(2),
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.2.3.4.2.3.1.15,BLADETYPE4-NETWORK-MIB::lacpInfoPortActOpDist,INTEGER,read-only,,current,true(1):false(2),
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.2.3.4.2.3.1.16,BLADETYPE4-NETWORK-MIB::lacpInfoPortPartOpPortState,OCTET,read-only,,current,,The state of Partner Operator Port. This is a octet mask with the following bits: Activity, Synchronization, Defaulted,  Timeout, Collecting, Expired, Aggregation and Distributing. If all of them are 0 then the state is showed as 0x0, else it is displayed a blank state which mean is not a NULL state
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.2.3.4.2.3.1.17,BLADETYPE4-NETWORK-MIB::lacpInfoPortPartOpActiv,INTEGER,read-only,,current,active(1):passive(2),
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.2.3.4.2.3.1.18,BLADETYPE4-NETWORK-MIB::lacpInfoPortPartOpSync,INTEGER,read-only,,current,true(1):false(2),
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.2.3.4.2.3.1.19,BLADETYPE4-NETWORK-MIB::lacpInfoPortPartOpDef,INTEGER,read-only,,current,true(1):false(2),
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.2.3.4.2.3.1.20,BLADETYPE4-NETWORK-MIB::lacpInfoPortPartOpTimeout,INTEGER,read-only,,current,short(1):long(2),
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.2.3.4.2.3.1.21,BLADETYPE4-NETWORK-MIB::lacpInfoPortPartOpColl,INTEGER,read-only,,current,true(1):false(2),
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.2.3.4.2.3.1.22,BLADETYPE4-NETWORK-MIB::lacpInfoPortPartOpExp,INTEGER,read-only,,current,true(1):false(2),
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.2.3.4.2.3.1.23,BLADETYPE4-NETWORK-MIB::lacpInfoPortPartOpAggr,INTEGER,read-only,,current,true(1):false(2),
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.2.3.4.2.3.1.24,BLADETYPE4-NETWORK-MIB::lacpInfoPortPartOpDist,INTEGER,read-only,,current,true(1):false(2),
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.2.3.5,BLADETYPE4-NETWORK-MIB::dot1xInfo,,,,,,
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.2.3.5.1,BLADETYPE4-NETWORK-MIB::dot1xInfoPortTable,,not-accessible,,current,,The table of 8021x configuration in the Current_config.
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.2.3.5.1.1,BLADETYPE4-NETWORK-MIB::dot1xInfoPortEntry,,not-accessible,dot1xInfoPortIndex,current,,Information about 8021x Port Config
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.2.3.5.1.1.1,BLADETYPE4-NETWORK-MIB::dot1xInfoPortIndex,Unsigned32,read-only,,current,,The 8021x Port number for which the table is related.
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.2.3.5.1.1.2,BLADETYPE4-NETWORK-MIB::dot1xInfoPortAuthMode,INTEGER,read-only,,current,forceUnauth(0):auto(1):forceAuth(2), Authentication mode 
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.2.3.5.1.1.3,BLADETYPE4-NETWORK-MIB::dot1xInfoPortAuthStatus,INTEGER,read-only,,current,authorized(0):unauthorized(1), Authentication status 
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.2.3.5.1.1.4,BLADETYPE4-NETWORK-MIB::dot1xInfoPortCtrlDir,INTEGER,read-only,,current,both(0):in(1), Controlled Directions 
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.2.3.5.1.1.5,BLADETYPE4-NETWORK-MIB::dot1xInfoPortAuthPAEState,INTEGER,read-only,,current,initialize(0):disconnected(1):connecting(2):authenticating(3):authenticated(4):aborting(5):held(6):forceauth(7):forceunauth(8), Authenticator PAE State 
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.2.3.5.1.1.6,BLADETYPE4-NETWORK-MIB::dot1xInfoPortBackAuthState,INTEGER,read-only,,current,request(0):response(1):success(2):fail(3):timeout(4):idle(5):initialize(6), Backend authenticator PAE state 
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.2.3.5.2,BLADETYPE4-NETWORK-MIB::dot1xSystemInfo,,,,,,
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.2.3.5.2.1,BLADETYPE4-NETWORK-MIB::dot1xSystemCapability,INTEGER,read-only,,current,authenticator(0):supplicant(1):authenticatorAndSupplicant(2):unknown(3), System capability 
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.2.3.5.2.2,BLADETYPE4-NETWORK-MIB::dot1xSystemStatus,INTEGER,read-only,,current,enabled(0):disabled(1), System status 
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.2.3.5.2.3,BLADETYPE4-NETWORK-MIB::dot1xSystemProtoVersion,INTEGER,read-only,,current,, Protocol version 
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.2.3.6,BLADETYPE4-NETWORK-MIB::dot1pInfo,,,,,,
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.2.3.6.1,BLADETYPE4-NETWORK-MIB::dot1pInfoPriorityCOSTable,,not-accessible,,current,,The table of current priority to COS queue information.
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.2.3.6.1.1,BLADETYPE4-NETWORK-MIB::dot1pInfoPriorityCOSEntry,,not-accessible,dot1pInfoPriorityIndex,current,,Current information about 8021p priority to COS queue.
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.2.3.6.1.1.1,BLADETYPE4-NETWORK-MIB::dot1pInfoPriorityIndex,INTEGER,read-only,,current,,The 8021p priority for which the table is related.
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.2.3.6.1.1.2,BLADETYPE4-NETWORK-MIB::dot1pInfoPriorityCOSQueue,INTEGER,read-only,,current,,The 8021p priority COSq.
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.2.3.6.1.1.3,BLADETYPE4-NETWORK-MIB::dot1pInfoPriorityCOSWeight,INTEGER,read-only,,current,,The 8021p priority weight.
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.2.3.6.2,BLADETYPE4-NETWORK-MIB::dot1pInfoPortTable,,not-accessible,,current,,The table of 8021p port priority configuration  in the Current_config.
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.2.3.6.2.1,BLADETYPE4-NETWORK-MIB::dot1pInfoPortEntry,,not-accessible,dot1pInfoPortIndex,current,,Information about 8021p Port Priority
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.2.3.6.2.1.1,BLADETYPE4-NETWORK-MIB::dot1pInfoPortIndex,Unsigned32,read-only,,current,,The 8021p Port number for which the table is related.
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.2.3.6.2.1.2,BLADETYPE4-NETWORK-MIB::dot1pInfoPortPriority,INTEGER,read-only,,current,,The 8021p Port number for which the table is related.
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.2.3.6.2.1.3,BLADETYPE4-NETWORK-MIB::dot1pInfoPortCOSq,INTEGER,read-only,,current,,The 8021p port COSq.
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.2.3.6.2.1.4,BLADETYPE4-NETWORK-MIB::dot1pInfoPortWeight,INTEGER,read-only,,current,,The 8021p port weight.
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.2.3.7,BLADETYPE4-NETWORK-MIB::genInfo,,,,,,
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.2.3.7.1,BLADETYPE4-NETWORK-MIB::generalInfoStpUplinkFast,INTEGER,read-only,,current,enabled(1):disabled(2),STP uplink fast mode
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.2.3.7.2,BLADETYPE4-NETWORK-MIB::generalInfoUplinkFastRate,INTEGER,read-only,,current,,STP fast uplink rate.
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.2.3.8,BLADETYPE4-NETWORK-MIB::vlanInfo,,,,,,
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.2.3.8.1,BLADETYPE4-NETWORK-MIB::vlanInfoTable,,not-accessible,,current,,The table of VLAN information.
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.2.3.8.1.1,BLADETYPE4-NETWORK-MIB::vlanInfoTableEntry,,not-accessible,vlanInfoId,current,,Information about a particular VLAN.
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.2.3.8.1.1.1,BLADETYPE4-NETWORK-MIB::vlanInfoId,INTEGER,read-only,,current,,The VLAN identifier.
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.2.3.8.1.1.2,BLADETYPE4-NETWORK-MIB::vlanInfoName,OCTET,read-only,,current,,The VLAN name.
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.2.3.8.1.1.3,BLADETYPE4-NETWORK-MIB::vlanInfoStatus,INTEGER,read-only,,current,enabled(2):disabled(3),Enable or disable, VLAN state information
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.2.3.8.1.1.4,BLADETYPE4-NETWORK-MIB::vlanInfoPorts,OCTET,read-only,,current,,The port list information in the VLAN. The ports are presented  in bitmap format. in receiving order: OCTET 1 OCTET 2 ..... xxxxxxxx xxxxxxxx .....  || || |_ port 8 || ||  || ||___ port 7 || |____ port 6 || . . . ||_________ port 1 |__________ reserved where x : 1 - The represented port belongs to the VLAN 0 - The represented port does not belong to the VLAN
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.2.3.9,BLADETYPE4-NETWORK-MIB::trunkGroupInfo,,,,,,
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.2.3.9.1,BLADETYPE4-NETWORK-MIB::trunkGroupInfoTable,,not-accessible,,current,,The table of trunk group information.
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.2.3.9.1.1,BLADETYPE4-NETWORK-MIB::trunkGroupInfoTableEntry,,not-accessible,trunkGroupInfoIndex,current,,A row in trunk group information table.
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.2.3.9.1.1.1,BLADETYPE4-NETWORK-MIB::trunkGroupInfoIndex,Integer32,read-only,,current,,The identifier of the trunk group.
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.2.3.9.1.1.2,BLADETYPE4-NETWORK-MIB::trunkGroupInfoState,INTEGER,read-only,,current,enabled(1):disabled(2),Trunk group state.
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.2.3.9.1.1.3,BLADETYPE4-NETWORK-MIB::trunkGroupInfoPorts,OCTET,read-only,,current,,The port list in the trunk group. The ports are presented in  bitmap format. in receiving order: OCTET 1 OCTET 2 ..... xxxxxxxx xxxxxxxx .....  || || |_ port 8 || ||  || ||___ port 7 || |____ port 6 || . . . ||_________ port 1 |__________ reserved where x : 1 - The represented port belongs to the trunk group 0 - The represented port does not belong to the trunk group
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.2.3.9.1.1.4,BLADETYPE4-NETWORK-MIB::trunkGroupInfoProtocol,INTEGER,read-only,,current,static(1):lacp(2),Trunk group protocol Static - static trunk group Lacp - dynamic trunk group
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.2.3.9.1.1.5,BLADETYPE4-NETWORK-MIB::trunkGroupInfoStgs,OCTET,read-only,,current,,The stg list the trunk group is in. The stgs are presented in bitmap format.
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.2.3.9.2,BLADETYPE4-NETWORK-MIB::trunkGroupInfoPortTable,,not-accessible,,current,,The table of Trunk Group Info.
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.2.3.9.2.1,BLADETYPE4-NETWORK-MIB::trunkGroupInfoPortTableEntry,,not-accessible,trunkGroupInfoPortTrunkId:trunkGroupInfoPortPortId,current,,A row in the Trunk Info table.
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.2.3.9.2.1.1,BLADETYPE4-NETWORK-MIB::trunkGroupInfoPortTrunkId,Integer32,read-only,,current,,The Trunk identifier.
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.2.3.9.2.1.2,BLADETYPE4-NETWORK-MIB::trunkGroupInfoPortPortId,Unsigned32,read-only,,current,,The Port identifier.
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.2.3.9.2.1.3,BLADETYPE4-NETWORK-MIB::trunkGroupInfoPortStatus,INTEGER,read-only,,current,down(0):blocking(1):forwarding(2),The Port Status.
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.2.4,BLADETYPE4-NETWORK-MIB::layer2Oper,,,,,,
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.3,BLADETYPE4-NETWORK-MIB::layer3,,,,,,
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.1,BLADETYPE4-NETWORK-MIB::layer3Configs,,,,,,
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.1.1,BLADETYPE4-NETWORK-MIB::ipInterfaceCfg,,,,,,
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.1.1.1,BLADETYPE4-NETWORK-MIB::ipInterfaceTableMax,Integer32,read-only,,current,,The maximum number of rows in the IP interface table.
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.1.1.2,BLADETYPE4-NETWORK-MIB::ipCurCfgIntfTable,,not-accessible,,current,,The table of IP interface configuration.
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.1.1.2.1,BLADETYPE4-NETWORK-MIB::ipCurCfgIntfEntry,,not-accessible,ipCurCfgIntfIndex,current,,A row in the Ip interface table
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.1.1.2.1.1,BLADETYPE4-NETWORK-MIB::ipCurCfgIntfIndex,Integer32,read-only,,current,,The interface number for which the IP information is related.
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.1.1.2.1.2,BLADETYPE4-NETWORK-MIB::ipCurCfgIntfAddr,IpAddress,read-only,,current,,The IP address of the interface.
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.1.1.2.1.3,BLADETYPE4-NETWORK-MIB::ipCurCfgIntfMask,IpAddress,read-only,,current,,The subnet mask of the interface.
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.1.1.2.1.4,BLADETYPE4-NETWORK-MIB::ipCurCfgIntfBroadcast,IpAddress,read-only,,current,,The broadcast address of the interface.
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.1.1.2.1.5,BLADETYPE4-NETWORK-MIB::ipCurCfgIntfVlan,INTEGER,read-only,,current,,The VLAN associated with the interface.
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.1.1.2.1.6,BLADETYPE4-NETWORK-MIB::ipCurCfgIntfState,INTEGER,read-only,,current,enabled(2):disabled(3),The state of the interface.
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.1.1.2.1.7,BLADETYPE4-NETWORK-MIB::ipCurCfgIntfBootpRelay,INTEGER,read-only,,current,enabled(1):disabled(2),Enable/disable BOOTP relay.
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.1.1.3,BLADETYPE4-NETWORK-MIB::ipNewCfgIntfTable,,not-accessible,,current,,The table of interface configuration in the New Configuration Block.
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.1.1.3.1,BLADETYPE4-NETWORK-MIB::ipNewCfgIntfEntry,,not-accessible,ipNewCfgIntfIndex,current,,A row in the Ip interface table
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.1.1.3.1.1,BLADETYPE4-NETWORK-MIB::ipNewCfgIntfIndex,Integer32,read-only,,current,,The interface number for which the IP information is related.
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.1.1.3.1.2,BLADETYPE4-NETWORK-MIB::ipNewCfgIntfAddr,IpAddress,read-create,,current,,The IP address of the interface.
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.1.1.3.1.3,BLADETYPE4-NETWORK-MIB::ipNewCfgIntfMask,IpAddress,read-create,,current,,The subnet mask of the interface.
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.1.1.3.1.5,BLADETYPE4-NETWORK-MIB::ipNewCfgIntfVlan,INTEGER,read-create,,current,,The VLAN associated with the interface.
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.1.1.3.1.6,BLADETYPE4-NETWORK-MIB::ipNewCfgIntfState,INTEGER,read-create,,current,enabled(2):disabled(3),The state of the interface.
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.1.1.3.1.7,BLADETYPE4-NETWORK-MIB::ipNewCfgIntfDelete,INTEGER,read-create,,current,other(1):delete(2),When set to the value of 2 (delete), the entire row is deleted.  When read, other(1) is returned. Setting the value to anything  other than 2(delete) has no effect on the state of the row.
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.1.1.3.1.8,BLADETYPE4-NETWORK-MIB::ipNewCfgIntfBootpRelay,INTEGER,read-create,,current,enabled(1):disabled(2),Enable/disable BOOTP relay.
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.1.2,BLADETYPE4-NETWORK-MIB::ipGatewayCfg,,,,,,
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.1.2.3,BLADETYPE4-NETWORK-MIB::ipGatewayTableMax,Integer32,read-only,,current,,The maximum number of rows in the IP gateway table.
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.1.2.4,BLADETYPE4-NETWORK-MIB::ipCurCfgGwTable,,not-accessible,,current,,The table of gateways in the Current configuration Block.
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.1.2.4.1,BLADETYPE4-NETWORK-MIB::ipCurCfgGwEntry,,not-accessible,ipCurCfgGwIndex,current,,A row in the Ip gateway table
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.1.2.4.1.1,BLADETYPE4-NETWORK-MIB::ipCurCfgGwIndex,Integer32,read-only,,current,,The gateway number for which the information is related.
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.1.2.4.1.2,BLADETYPE4-NETWORK-MIB::ipCurCfgGwAddr,IpAddress,read-only,,current,,The IP address of the default gateway.
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.1.2.4.1.3,BLADETYPE4-NETWORK-MIB::ipCurCfgGwInterval,INTEGER,read-only,,current,,The interval between ping attempts.
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.1.2.4.1.4,BLADETYPE4-NETWORK-MIB::ipCurCfgGwRetry,INTEGER,read-only,,current,,The number of failed attempts to declare the default gateway DOWN.
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.1.2.4.1.5,BLADETYPE4-NETWORK-MIB::ipCurCfgGwState,INTEGER,read-only,,current,enabled(2):disabled(3),The state of the default gateway.
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.1.2.4.1.6,BLADETYPE4-NETWORK-MIB::ipCurCfgGwArp,INTEGER,read-only,,current,enabled(2):disabled(3),The state of ARP only health checks.
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.1.2.5,BLADETYPE4-NETWORK-MIB::ipNewCfgGwTable,,not-accessible,,current,,The table of gateway configuration in the new configuration block.
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.1.2.5.1,BLADETYPE4-NETWORK-MIB::ipNewCfgGwEntry,,not-accessible,ipNewCfgGwIndex,current,,A row in the Ip default gateway table
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.1.2.5.1.1,BLADETYPE4-NETWORK-MIB::ipNewCfgGwIndex,Integer32,read-only,,current,,The gateway number for which the information is related.
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.1.2.5.1.2,BLADETYPE4-NETWORK-MIB::ipNewCfgGwAddr,IpAddress,read-create,,current,,The IP address of the default gateway.
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.1.2.5.1.3,BLADETYPE4-NETWORK-MIB::ipNewCfgGwInterval,INTEGER,read-create,,current,,The interval in seconds between ping attempts.
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.1.2.5.1.4,BLADETYPE4-NETWORK-MIB::ipNewCfgGwRetry,INTEGER,read-create,,current,,The number of failed attempts to declare the default gateway DOWN.
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.1.2.5.1.5,BLADETYPE4-NETWORK-MIB::ipNewCfgGwState,INTEGER,read-create,,current,enabled(2):disabled(3),The state of the default gateway.
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.1.2.5.1.6,BLADETYPE4-NETWORK-MIB::ipNewCfgGwDelete,INTEGER,read-create,,current,other(1):delete(2),When set to the value of 2 (delete), the entire row is deleted.  When read, other is returned. Setting the value to anything other  than 2(delete) has no effect on the state of the row.
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.1.2.5.1.7,BLADETYPE4-NETWORK-MIB::ipNewCfgGwArp,INTEGER,read-create,,current,enabled(2):disabled(3),The state of the ARP only health checks.
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.1.3,BLADETYPE4-NETWORK-MIB::ipStaticRouteCfg,,,,,,
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.1.3.1,BLADETYPE4-NETWORK-MIB::ipStaticRouteTableMaxSize,Integer32,read-only,,current,,The maximum number of rows in the Static Route table.
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.1.3.2,BLADETYPE4-NETWORK-MIB::ipCurCfgStaticRouteTable,,not-accessible,,current,,The table of static routes in the current configuration block.
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.1.3.2.1,BLADETYPE4-NETWORK-MIB::ipCurCfgStaticRouteEntry,,not-accessible,ipCurCfgStaticRouteIndx,current,,A row in the static IP route table
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.1.3.2.1.1,BLADETYPE4-NETWORK-MIB::ipCurCfgStaticRouteIndx,Integer32,read-only,,current,,The index of the static routing table.
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.1.3.2.1.2,BLADETYPE4-NETWORK-MIB::ipCurCfgStaticRouteDestIp,IpAddress,read-only,,current,,The destination IP address of this route.
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.1.3.2.1.3,BLADETYPE4-NETWORK-MIB::ipCurCfgStaticRouteMask,IpAddress,read-only,,current,,The destination IP address of this route.
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.1.3.2.1.4,BLADETYPE4-NETWORK-MIB::ipCurCfgStaticRouteGateway,IpAddress,read-only,,current,,The destination IP address of this route.
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.1.3.2.1.5,BLADETYPE4-NETWORK-MIB::ipCurCfgStaticRouteInterface,Integer32,read-only,,current,,The IP interface of this route. The IP address of the specified  interface shall be use as source IP when performs routing.
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.1.3.3,BLADETYPE4-NETWORK-MIB::ipNewCfgStaticRouteTable,,not-accessible,,current,,The table of static routes in the new configuration block.
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.1.3.3.1,BLADETYPE4-NETWORK-MIB::ipNewCfgStaticRouteEntry,,not-accessible,ipNewCfgStaticRouteIndx,current,,A row in the static IP route table
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.1.3.3.1.1,BLADETYPE4-NETWORK-MIB::ipNewCfgStaticRouteIndx,Integer32,read-only,,current,,The index of the static routing table.
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.1.3.3.1.2,BLADETYPE4-NETWORK-MIB::ipNewCfgStaticRouteDestIp,IpAddress,read-create,,current,,The destination IP address of this route.
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.1.3.3.1.3,BLADETYPE4-NETWORK-MIB::ipNewCfgStaticRouteMask,IpAddress,read-create,,current,,The subnet mask of this route.
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.1.3.3.1.4,BLADETYPE4-NETWORK-MIB::ipNewCfgStaticRouteGateway,IpAddress,read-create,,current,,The IP address of the gateway for this route.
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.1.3.3.1.5,BLADETYPE4-NETWORK-MIB::ipNewCfgStaticRouteAction,INTEGER,read-create,,current,other(1):delete(2),When set to the value of 2 (delete), the entire row is deleted.  When read, other is returned. Setting the value to anything other  than 2(delete) has no effect on the state of the row.
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.1.3.3.1.6,BLADETYPE4-NETWORK-MIB::ipNewCfgStaticRouteInterface,Integer32,read-create,,current,,The IP interface of this route. The IP address of the specified  interface shall be use as source IP when performs routing.
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.1.3.4,BLADETYPE4-NETWORK-MIB::ipStaticRouteClearAllByDestIp,IpAddress,read-write,,current,,Clears all static routes with the specified destination IP address.
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.1.3.5,BLADETYPE4-NETWORK-MIB::ipStaticRouteClearAllByGatewayIp,IpAddress,read-write,,current,,Clears all static routes with the specified gateway IP address.
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.1.3.6,BLADETYPE4-NETWORK-MIB::ipStaticRouteClearAllByInterface,INTEGER,read-write,,current,,Clears all routes on the specified inteface number.
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.1.3.7,BLADETYPE4-NETWORK-MIB::ipStaticRouteClearAll,INTEGER,read-write,,current,ok(1):clear(2),When set to clear(2),clears all static routes. Otherwhise nothing is done.
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.1.4,BLADETYPE4-NETWORK-MIB::ipForwardCfg,,,,,,
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.1.4.1,BLADETYPE4-NETWORK-MIB::ipFwdGeneralCfg,,,,,,
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.1.4.1.1,BLADETYPE4-NETWORK-MIB::ipFwdCurCfgState,INTEGER,read-only,,current,on(2):off(3),IP forwarding global state.
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.1.4.1.2,BLADETYPE4-NETWORK-MIB::ipFwdNewCfgState,INTEGER,read-write,,current,on(2):off(3),IP forwarding global state.
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.1.4.1.3,BLADETYPE4-NETWORK-MIB::ipFwdCurCfgDirectedBcast,INTEGER,read-only,,current,enabled(2):disabled(3),Enable or disable forwarding directed broadcasts.
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.1.4.1.4,BLADETYPE4-NETWORK-MIB::ipFwdNewCfgDirectedBcast,INTEGER,read-write,,current,enabled(2):disabled(3),Enable or disable forwarding directed broadcasts.
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.1.6,BLADETYPE4-NETWORK-MIB::vrrpCfg,,,,,,
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.1.6.1,BLADETYPE4-NETWORK-MIB::vrrpGeneral,,,,,,
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.1.6.1.1,BLADETYPE4-NETWORK-MIB::vrrpCurCfgGenState,INTEGER,read-only,,current,enabled(1):disabled(2),Enable or disable VRRP operation globally.
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.1.6.1.2,BLADETYPE4-NETWORK-MIB::vrrpNewCfgGenState,INTEGER,read-write,,current,enabled(1):disabled(2),Enable or disable VRRP operation globally.
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.1.6.1.3,BLADETYPE4-NETWORK-MIB::vrrpCurCfgGenTckVirtRtrInc,INTEGER,read-only,,current,,The increment of VRRP virtual router priority. The priority is  adjusted by tracking the state of other virtual routers.
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.1.6.1.4,BLADETYPE4-NETWORK-MIB::vrrpNewCfgGenTckVirtRtrInc,INTEGER,read-write,,current,,The increment of VRRP virtual router priority. The priority is  adjusted by tracking the state of other virtual routers.
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.1.6.1.5,BLADETYPE4-NETWORK-MIB::vrrpCurCfgGenTckIpIntfInc,INTEGER,read-only,,current,,The increment of VRRP virtual router priority. The priority is  adjusted by tracking the state of other router interfaces.
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.1.6.1.6,BLADETYPE4-NETWORK-MIB::vrrpNewCfgGenTckIpIntfInc,INTEGER,read-write,,current,,The increment of VRRP virtual router priority. The priority is  adjusted by tracking the state of other router interfaces.
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.1.6.1.7,BLADETYPE4-NETWORK-MIB::vrrpCurCfgGenTckVlanPortInc,INTEGER,read-only,,current,,The increment of VRRP virtual router priority. The priority is  adjusted by tracking the port state of ports that belongs to the  same virtual LAN as the virtual router.
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.1.6.1.8,BLADETYPE4-NETWORK-MIB::vrrpNewCfgGenTckVlanPortInc,INTEGER,read-write,,current,,The increment of VRRP virtual router priority. The priority is  adjusted by tracking the port state of ports that belongs to the  same virtual LAN as the virtual router.
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.1.6.2,BLADETYPE4-NETWORK-MIB::vrrpVirtRtrTableMaxSize,Integer32,read-only,,current,,The maximum number of entries in VRRP virtual router table.
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.1.6.3,BLADETYPE4-NETWORK-MIB::vrrpCurCfgVirtRtrTable,,not-accessible,,current,,The table of VRRP virtual routers configuration in current_config.
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.1.6.3.1,BLADETYPE4-NETWORK-MIB::vrrpCurCfgVirtRtrTableEntry,,not-accessible,vrrpCurCfgVirtRtrIndx,current,,Information about a VRRP virtual router.
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.1.6.3.1.1,BLADETYPE4-NETWORK-MIB::vrrpCurCfgVirtRtrIndx,Integer32,read-only,,current,,The VRRP virtual router table index.
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.1.6.3.1.2,BLADETYPE4-NETWORK-MIB::vrrpCurCfgVirtRtrID,INTEGER,read-only,,current,,The VRRP virtual router identifier.
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.1.6.3.1.3,BLADETYPE4-NETWORK-MIB::vrrpCurCfgVirtRtrAddr,IpAddress,read-only,,current,,The VRRP virtual router IP address.
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.1.6.3.1.4,BLADETYPE4-NETWORK-MIB::vrrpCurCfgVirtRtrIfIndex,Integer32,read-only,,current,,The IfIndex that the VRRP virtual router is representing.
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.1.6.3.1.5,BLADETYPE4-NETWORK-MIB::vrrpCurCfgVirtRtrInterval,INTEGER,read-only,,current,,The time interval between VRRP advertisements in seconds. When FAST_ADVERTISEMENT is enabled, this object indicates advertisement interval in centi-seconds
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.1.6.3.1.6,BLADETYPE4-NETWORK-MIB::vrrpCurCfgVirtRtrPriority,INTEGER,read-only,,current,,The priority value to be used by the specified VRRP virtual routers.
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.1.6.3.1.7,BLADETYPE4-NETWORK-MIB::vrrpCurCfgVirtRtrPreempt,INTEGER,read-only,,current,enabled(1):disabled(2),This is for controlling whether a higher priority Backup VRRP virtual router preempts a low priority Master. enabled(1) - allow preemption disabled(2) - prohibit preemption
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.1.6.3.1.8,BLADETYPE4-NETWORK-MIB::vrrpCurCfgVirtRtrState,INTEGER,read-only,,current,enabled(1):disabled(2),Enable or disable the VRRP virtual router.
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.1.6.3.1.10,BLADETYPE4-NETWORK-MIB::vrrpCurCfgVirtRtrTckVirtRtr,INTEGER,read-only,,current,enabled(1):disabled(2),Enable or disable tracking other virtual routers for priority  adjustment. The priority increment is defined  in vrrpCurCfgGenTckVirtRtrInc.
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.1.6.3.1.11,BLADETYPE4-NETWORK-MIB::vrrpCurCfgVirtRtrTckIpIntf,INTEGER,read-only,,current,enabled(1):disabled(2),Enable or disable tracking other router interfaces for 
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.1.6.3.1.12,BLADETYPE4-NETWORK-MIB::vrrpCurCfgVirtRtrTckVlanPort,INTEGER,read-only,,current,enabled(1):disabled(2),Enable or disable tracking port state of VLAN ports 
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.1.6.4,BLADETYPE4-NETWORK-MIB::vrrpNewCfgVirtRtrTable,,not-accessible,,current,,The table of VRRP virtual routers configuration in current_config.
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.1.6.4.1,BLADETYPE4-NETWORK-MIB::vrrpNewCfgVirtRtrTableEntry,,not-accessible,vrrpNewCfgVirtRtrIndx,current,,Information about a VRRP virtual router.
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.1.6.4.1.1,BLADETYPE4-NETWORK-MIB::vrrpNewCfgVirtRtrIndx,Integer32,read-only,,current,,The VRRP virtual router table index.
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.1.6.4.1.2,BLADETYPE4-NETWORK-MIB::vrrpNewCfgVirtRtrID,INTEGER,read-write,,current,,The VRRP virtual router identifier.
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.1.6.4.1.3,BLADETYPE4-NETWORK-MIB::vrrpNewCfgVirtRtrAddr,IpAddress,read-create,,current,,The VRRP virtual router IP address.
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.1.6.4.1.4,BLADETYPE4-NETWORK-MIB::vrrpNewCfgVirtRtrIfIndex,Integer32,read-create,,current,,The IfIndex that the VRRP virtual router is representing.
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.1.6.4.1.5,BLADETYPE4-NETWORK-MIB::vrrpNewCfgVirtRtrInterval,INTEGER,read-create,,current,,The time interval between VRRP advertisements in seconds. When FAST_ADVERTISEMENT is enabled, this object indicates advertisement interval in centi-seconds
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.1.6.4.1.6,BLADETYPE4-NETWORK-MIB::vrrpNewCfgVirtRtrPriority,INTEGER,read-create,,current,,The priority value to be used by the specified VRRP virtual router.
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.1.6.4.1.7,BLADETYPE4-NETWORK-MIB::vrrpNewCfgVirtRtrPreempt,INTEGER,read-create,,current,enabled(1):disabled(2),This is for controlling whether a higher priority Backup VRRP virtual router preempts a low priority Master. enabled(1) - allow preemption disabled(2) - prohibit preemption
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.1.6.4.1.8,BLADETYPE4-NETWORK-MIB::vrrpNewCfgVirtRtrState,INTEGER,read-create,,current,enabled(1):disabled(2),Enable or disable the VRRP virtual router.
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.1.6.4.1.9,BLADETYPE4-NETWORK-MIB::vrrpNewCfgVirtRtrDelete,INTEGER,read-create,,current,other(1):delete(2),When set to the value of 2 (delete), the entire row is deleted.  When read, other(1) is returned. Setting the value to anything  other than delete(2) has no effect on the state of the row.
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.1.6.4.1.11,BLADETYPE4-NETWORK-MIB::vrrpNewCfgVirtRtrTckVirtRtr,INTEGER,read-create,,current,enabled(1):disabled(2),Enable or disable tracking other virtual routers for 
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.1.6.4.1.12,BLADETYPE4-NETWORK-MIB::vrrpNewCfgVirtRtrTckIpIntf,INTEGER,read-create,,current,enabled(1):disabled(2),Enable or disable tracking other router interfaces for 
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.1.6.4.1.13,BLADETYPE4-NETWORK-MIB::vrrpNewCfgVirtRtrTckVlanPort,INTEGER,read-create,,current,enabled(1):disabled(2),Enable or disable tracking port state of VLAN ports 
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.1.6.5,BLADETYPE4-NETWORK-MIB::vrrpIfTableMaxSize,Integer32,read-only,,current,,The maximum number of entries in VRRP interface table.
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.1.6.6,BLADETYPE4-NETWORK-MIB::vrrpCurCfgIfTable,,not-accessible,,current,,The table of VRRP interface configuration in current_config.
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.1.6.6.1,BLADETYPE4-NETWORK-MIB::vrrpCurCfgIfTableEntry,,not-accessible,vrrpCurCfgIfIndx,current,,Information about a VRRP interface.
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.1.6.6.1.1,BLADETYPE4-NETWORK-MIB::vrrpCurCfgIfIndx,Integer32,read-only,,current,,The VRRP interface index. This is eqivalent to IfIndex.
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.1.6.6.1.2,BLADETYPE4-NETWORK-MIB::vrrpCurCfgIfAuthType,INTEGER,read-only,,current,none(1):simple-text-password(2),Type of authentication being used. vrrpCurCfgIfPasswd for authentication.
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.1.6.6.1.3,BLADETYPE4-NETWORK-MIB::vrrpCurCfgIfPasswd,OCTET,read-only,,current,,The password for authentication.
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.1.6.7,BLADETYPE4-NETWORK-MIB::vrrpNewCfgIfTable,,not-accessible,,current,,The table of VRRP interface configuration in current_config.
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.1.6.7.1,BLADETYPE4-NETWORK-MIB::vrrpNewCfgIfTableEntry,,not-accessible,vrrpNewCfgIfIndx,current,,Information about a VRRP interface.
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.1.6.7.1.1,BLADETYPE4-NETWORK-MIB::vrrpNewCfgIfIndx,Integer32,read-only,,current,,The VRRP interface index. This is eqivalent to IfIndex.
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.1.6.7.1.2,BLADETYPE4-NETWORK-MIB::vrrpNewCfgIfAuthType,INTEGER,read-create,,current,none(1):simple-text-password(2),Type of authentication being used. vrrpNewCfgIfPasswd for authentication.
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.1.6.7.1.3,BLADETYPE4-NETWORK-MIB::vrrpNewCfgIfPasswd,OCTET,read-create,,current,,The password for authentication.
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.1.6.7.1.4,BLADETYPE4-NETWORK-MIB::vrrpNewCfgIfDelete,INTEGER,read-create,,current,other(1):delete(2),When set to the value of 2 (delete), the entire row is deleted.  When read, other(1) is returned. Setting the value to anything  other than delete(2) has no effect on the state of the row.
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.1.6.8,BLADETYPE4-NETWORK-MIB::vrrpVirtRtrGrpTableMaxSize,Integer32,read-only,,current,,The maximum number of entries in VRRP Group table.
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.1.6.9,BLADETYPE4-NETWORK-MIB::vrrpCurCfgVirtRtrGrpTable,,not-accessible,,current,,The table of VRRP virtual router group in current_config.
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.1.6.9.1,BLADETYPE4-NETWORK-MIB::vrrpCurCfgVirtRtrGrpTableEntry,,not-accessible,vrrpCurCfgVirtRtrGrpIndx,current,,Information about a VRRP failover virtual router.
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.1.6.9.1.1,BLADETYPE4-NETWORK-MIB::vrrpCurCfgVirtRtrGrpIndx,Integer32,read-only,,current,,The VRRP virtual router table index.
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.1.6.9.1.2,BLADETYPE4-NETWORK-MIB::vrrpCurCfgVirtRtrGrpID,INTEGER,read-only,,current,,The VRRP virtual router identifier.
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.1.6.9.1.3,BLADETYPE4-NETWORK-MIB::vrrpCurCfgVirtRtrGrpIfIndex,Integer32,read-only,,current,,The IfIndex that the VRRP virtual router is representing.
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.1.6.9.1.4,BLADETYPE4-NETWORK-MIB::vrrpCurCfgVirtRtrGrpInterval,INTEGER,read-only,,current,,The time interval between VRRP advertisements in seconds.
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.1.6.9.1.5,BLADETYPE4-NETWORK-MIB::vrrpCurCfgVirtRtrGrpPriority,INTEGER,read-only,,current,,The priority value to be used by the specified VRRP virtual routers.
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.1.6.9.1.6,BLADETYPE4-NETWORK-MIB::vrrpCurCfgVirtRtrGrpPreempt,INTEGER,read-only,,current,enabled(1):disabled(2),This is for controlling whether a higher priority Backup VRRP virtual router preempts a low priority Master. enabled(1) - allow preemption disabled(2) - prohibit preemption
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.1.6.9.1.7,BLADETYPE4-NETWORK-MIB::vrrpCurCfgVirtRtrGrpState,INTEGER,read-only,,current,enabled(1):disabled(2),Enable or disable the VRRP virtual router.
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.1.6.9.1.10,BLADETYPE4-NETWORK-MIB::vrrpCurCfgVirtRtrGrpTckIpIntf,INTEGER,read-only,,current,enabled(1):disabled(2),Enable or disable tracking other router interfaces for priority adjustment. the priority increment is defined in vrrpCurCfgGenTckIpIntfInc.
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.1.6.9.1.11,BLADETYPE4-NETWORK-MIB::vrrpCurCfgVirtRtrGrpTckVlanPort,INTEGER,read-only,,current,enabled(1):disabled(2),Enable or disable tracking port state of VLAN ports for priority adjustment. the priority increment is defined in vrrpCurCfgGenTckVlanPortInc.
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.1.6.10,BLADETYPE4-NETWORK-MIB::vrrpNewCfgVirtRtrGrpTable,,not-accessible,,current,,The table of VRRP virtual router group configuration in new_config.
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.1.6.10.1,BLADETYPE4-NETWORK-MIB::vrrpNewCfgVirtRtrGrpTableEntry,,not-accessible,vrrpNewCfgVirtRtrGrpIndx,current,,Information about a VRRP failover virtual router.
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.1.6.10.1.1,BLADETYPE4-NETWORK-MIB::vrrpNewCfgVirtRtrGrpIndx,Integer32,read-only,,current,,The VRRP virtual router table index.
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.1.6.10.1.2,BLADETYPE4-NETWORK-MIB::vrrpNewCfgVirtRtrGrpID,INTEGER,read-create,,current,,The VRRP virtual router identifier.
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.1.6.10.1.3,BLADETYPE4-NETWORK-MIB::vrrpNewCfgVirtRtrGrpIfIndex,Integer32,read-create,,current,,The IfIndex that the VRRP virtual router is representing.
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.1.6.10.1.4,BLADETYPE4-NETWORK-MIB::vrrpNewCfgVirtRtrGrpInterval,INTEGER,read-create,,current,,The time interval between VRRP advertisements in seconds.
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.1.6.10.1.5,BLADETYPE4-NETWORK-MIB::vrrpNewCfgVirtRtrGrpPriority,INTEGER,read-create,,current,,The priority value to be used by the specified VRRP virtual router.
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.1.6.10.1.6,BLADETYPE4-NETWORK-MIB::vrrpNewCfgVirtRtrGrpPreempt,INTEGER,read-create,,current,enabled(1):disabled(2),This is for controlling whether a higher priority Backup VRRP virtual router preempts a low priority Master. enabled(1) - allow preemption disabled(2) - prohibit preemption
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.1.6.10.1.7,BLADETYPE4-NETWORK-MIB::vrrpNewCfgVirtRtrGrpState,INTEGER,read-create,,current,enabled(1):disabled(2),Enable or disable the VRRP virtual router.
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.1.6.10.1.8,BLADETYPE4-NETWORK-MIB::vrrpNewCfgVirtRtrGrpDelete,INTEGER,read-create,,current,other(1):delete(2),When set to the value of 2 (delete), the entire row is deleted.  When read, other(1) is returned. Setting the value to anything  other than delete(2) has no effect on the state of the row.
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.1.6.10.1.11,BLADETYPE4-NETWORK-MIB::vrrpNewCfgVirtRtrGrpTckIpIntf,INTEGER,read-create,,current,enabled(1):disabled(2),Enable or disable tracking other router interfaces for priority adjustment. the priority increment is defined in vrrpNewCfgGenTckIpIntfInc.
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.1.6.10.1.12,BLADETYPE4-NETWORK-MIB::vrrpNewCfgVirtRtrGrpTckVlanPort,INTEGER,read-create,,current,enabled(1):disabled(2),Enable or disable tracking port state of VLAN ports for priority adjustment. the priority increment is defined in vrrpNewCfgGenTckVlanPortInc.
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.1.7,BLADETYPE4-NETWORK-MIB::arpCfg,,,,,,
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.1.7.1,BLADETYPE4-NETWORK-MIB::arpCurCfgReARPPeriod,INTEGER,read-only,,current,,Re-ARP Period in seconds.
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.1.7.2,BLADETYPE4-NETWORK-MIB::arpNewCfgReARPPeriod,INTEGER,read-write,,current,,Re-ARP Period in seconds.
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.1.7.3,BLADETYPE4-NETWORK-MIB::ipStaticArpTableMaxSize,INTEGER,read-only,,current,,The maximum number of rows in the Static ARP table.
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.1.7.4,BLADETYPE4-NETWORK-MIB::ipCurCfgStaticArpTable,,not-accessible,,current,,The table of static ARPs in the current configuration block.
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.1.7.4.1,BLADETYPE4-NETWORK-MIB::ipCurCfgStaticArpEntry,,not-accessible,ipCurCfgStaticArpIndx,current,,A row in the static ARP table
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.1.7.4.1.1,BLADETYPE4-NETWORK-MIB::ipCurCfgStaticArpIndx,Integer32,read-only,,current,,The index of the static ARP table.
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.1.7.4.1.2,BLADETYPE4-NETWORK-MIB::ipCurCfgStaticArpIp,IpAddress,read-only,,current,,The IP address for the ARP entry.
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.1.7.4.1.3,BLADETYPE4-NETWORK-MIB::ipCurCfgStaticArpMAC,OCTET,read-only,,current,,The MAC address for the ARP entry.
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.1.7.4.1.4,BLADETYPE4-NETWORK-MIB::ipCurCfgStaticArpVlan,INTEGER,read-only,,current,,The VLAN for the ARP entry.
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.1.7.4.1.5,BLADETYPE4-NETWORK-MIB::ipCurCfgStaticArpPort,Unsigned32,read-only,,current,,The port for the ARP entry.
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.1.7.5,BLADETYPE4-NETWORK-MIB::ipNewCfgStaticArpTable,,not-accessible,,current,,The table of static ARPs in the new configuration block.
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.1.7.5.1,BLADETYPE4-NETWORK-MIB::ipNewCfgStaticArpEntry,,not-accessible,ipNewCfgStaticArpIndx,current,,A row in the static ARP table
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.1.7.5.1.1,BLADETYPE4-NETWORK-MIB::ipNewCfgStaticArpIndx,Integer32,read-only,,current,,The index of the static ARP table.
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.1.7.5.1.2,BLADETYPE4-NETWORK-MIB::ipNewCfgStaticArpIp,IpAddress,read-create,,current,,The IP address for the ARP entry.
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.1.7.5.1.3,BLADETYPE4-NETWORK-MIB::ipNewCfgStaticArpMAC,OCTET,read-create,,current,,The MAC address for the ARP entry.
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.1.7.5.1.4,BLADETYPE4-NETWORK-MIB::ipNewCfgStaticArpVlan,INTEGER,read-create,,current,,The VLAN for the ARP entry.
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.1.7.5.1.5,BLADETYPE4-NETWORK-MIB::ipNewCfgStaticArpPort,Unsigned32,read-create,,current,,The port for the ARP entry.
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.1.7.5.1.6,BLADETYPE4-NETWORK-MIB::ipNewCfgStaticArpAction,INTEGER,read-create,,current,other(1):delete(2),When set to the value of 2 (delete), the entire row is deleted.  When read, other is returned. Setting the value to anything other  than 2(delete) has no effect on the state of the row.
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.1.7.6,BLADETYPE4-NETWORK-MIB::ipStaticArpClearAll,INTEGER,read-write,,current,ok(1):clear(2),When set to clear(2),clears all static ARP entries. Otherwhise nothing is done.
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.1.8,BLADETYPE4-NETWORK-MIB::ipBootpCfg,,,,,,
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.1.8.1,BLADETYPE4-NETWORK-MIB::ipCurCfgBootpAddr,IpAddress,read-only,,current,,The IP address of BOOTP server.
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.1.8.2,BLADETYPE4-NETWORK-MIB::ipNewCfgBootpAddr,IpAddress,read-write,,current,,The IP address of BOOTP server.
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.1.8.3,BLADETYPE4-NETWORK-MIB::ipCurCfgBootpAddr2,IpAddress,read-only,,current,,The IP address of second BOOTP server.
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.1.8.4,BLADETYPE4-NETWORK-MIB::ipNewCfgBootpAddr2,IpAddress,read-write,,current,,The IP address of second BOOTP server.
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.1.8.5,BLADETYPE4-NETWORK-MIB::ipCurCfgBootpState,INTEGER,read-only,,current,enabled(2):disabled(3),The state of BOOTP relay.
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.1.8.6,BLADETYPE4-NETWORK-MIB::ipNewCfgBootpState,INTEGER,read-write,,current,enabled(2):disabled(3),The state of BOOTP relay.
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.1.9,BLADETYPE4-NETWORK-MIB::dnsCfg,,,,,,
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.1.9.1,BLADETYPE4-NETWORK-MIB::dnsCurCfgPrimaryIpAddr,IpAddress,read-only,,current,,The DNS primary IP address in the current_configuration block.
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.1.9.2,BLADETYPE4-NETWORK-MIB::dnsNewCfgPrimaryIpAddr,IpAddress,read-write,,current,,The DNS primary IP address in the new_configuration block.
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.1.9.3,BLADETYPE4-NETWORK-MIB::dnsCurCfgSecondaryIpAddr,IpAddress,read-only,,current,,The DNS primary IP address in the current_configuration block.
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.1.9.4,BLADETYPE4-NETWORK-MIB::dnsNewCfgSecondaryIpAddr,IpAddress,read-write,,current,,The DNS primary IP address in the new_configuration block.
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.1.9.5,BLADETYPE4-NETWORK-MIB::dnsCurCfgDomainName,OCTET,read-only,,current,,The DNS doamin name in the current_configuration block.
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.1.9.6,BLADETYPE4-NETWORK-MIB::dnsNewCfgDomainName,OCTET,read-write,,current,,The DNS doamin name in the new_configuration block.
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.1.10,BLADETYPE4-NETWORK-MIB::ipNwfCfg,,,,,,
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.1.10.1,BLADETYPE4-NETWORK-MIB::ipNwfTableMax,Integer32,read-only,,current,,The maximum number of rows in the IP network filter table.
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.1.10.2,BLADETYPE4-NETWORK-MIB::ipCurCfgNwfTable,,not-accessible,,current,,The table of IP network filter configuration in the current_config.
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.1.10.2.1,BLADETYPE4-NETWORK-MIB::ipCurCfgNwfEntry,,not-accessible,ipCurCfgNwfIndex,current,,Information about an IP network filter.
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.1.10.2.1.1,BLADETYPE4-NETWORK-MIB::ipCurCfgNwfIndex,Integer32,read-only,,current,,The netowrk filter number for which the NWF is related.
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.1.10.2.1.2,BLADETYPE4-NETWORK-MIB::ipCurCfgNwfAddr,IpAddress,read-only,,current,,The IP address of the network filter.
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.1.10.2.1.3,BLADETYPE4-NETWORK-MIB::ipCurCfgNwfMask,IpAddress,read-only,,current,,The IP network filter mask.
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.1.10.2.1.4,BLADETYPE4-NETWORK-MIB::ipCurCfgNwfState,INTEGER,read-only,,current,enabled(1):disabled(2),Enable or disable the network filter.
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.1.10.3,BLADETYPE4-NETWORK-MIB::ipNewCfgNwfTable,,not-accessible,,current,,The table of IP network filter configuration in the current_config.
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.1.10.3.1,BLADETYPE4-NETWORK-MIB::ipNewCfgNwfEntry,,not-accessible,ipNewCfgNwfIndex,current,,Information about an IP network filter.
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.1.10.3.1.1,BLADETYPE4-NETWORK-MIB::ipNewCfgNwfIndex,Integer32,read-only,,current,,The netowrk filter number for which the NWF is related.
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.1.10.3.1.2,BLADETYPE4-NETWORK-MIB::ipNewCfgNwfAddr,IpAddress,read-create,,current,,The IP address of the network filter.
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.1.10.3.1.3,BLADETYPE4-NETWORK-MIB::ipNewCfgNwfMask,IpAddress,read-create,,current,,The IP network filter mask.
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.1.10.3.1.4,BLADETYPE4-NETWORK-MIB::ipNewCfgNwfState,INTEGER,read-create,,current,enabled(1):disabled(2),Enable or disable the network filter.
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.1.10.3.1.5,BLADETYPE4-NETWORK-MIB::ipNewCfgNwfDelete,INTEGER,read-create,,current,other(1):delete(2),When set to the value of 2 (delete), the entire row is deleted. 
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.1.11,BLADETYPE4-NETWORK-MIB::ipRmapCfg,,,,,,
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.1.11.1,BLADETYPE4-NETWORK-MIB::ipRmapTableMax,Integer32,read-only,,current,,The maximum number of rows in the IP route map table.
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.1.11.2,BLADETYPE4-NETWORK-MIB::ipCurCfgRmapTable,,not-accessible,,current,,The table of IP route map configuration in the current_config.
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.1.11.2.1,BLADETYPE4-NETWORK-MIB::ipCurCfgRmapEntry,,not-accessible,ipCurCfgRmapIndex,current,,Information about an IP route map.
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.1.11.2.1.1,BLADETYPE4-NETWORK-MIB::ipCurCfgRmapIndex,Integer32,read-only,,current,,The route map number for which the RMAP is related.
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.1.11.2.1.3,BLADETYPE4-NETWORK-MIB::ipCurCfgRmapMetric,Unsigned32,read-only,,current,,The metric of the route map. 4294967295 means none
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.1.11.2.1.4,BLADETYPE4-NETWORK-MIB::ipCurCfgRmapPrec,INTEGER,read-only,,current,,The precedence of the route map.
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.1.11.2.1.6,BLADETYPE4-NETWORK-MIB::ipCurCfgRmapState,INTEGER,read-only,,current,enabled(1):disabled(2),Enable or disable the route map.
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.1.11.2.1.8,BLADETYPE4-NETWORK-MIB::ipCurCfgRmapMetricType,INTEGER,read-only,,current,none(1):type1(2):type2(3),The OSPF metric-type of the matched route.
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.1.11.3,BLADETYPE4-NETWORK-MIB::ipNewCfgRmapTable,,not-accessible,,current,,The table of IP route map configuration in the current_config.
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.1.11.3.1,BLADETYPE4-NETWORK-MIB::ipNewCfgRmapEntry,,not-accessible,ipNewCfgRmapIndex,current,,Information about an IP route map.
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.1.11.3.1.1,BLADETYPE4-NETWORK-MIB::ipNewCfgRmapIndex,Integer32,read-only,,current,,The route map number for which the RMAP is related.
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.1.11.3.1.3,BLADETYPE4-NETWORK-MIB::ipNewCfgRmapMetric,Unsigned32,read-create,,current,,The metric of the route map. 16777215 means none
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.1.11.3.1.4,BLADETYPE4-NETWORK-MIB::ipNewCfgRmapPrec,INTEGER,read-create,,current,,The precedence of the route map.
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.1.11.3.1.6,BLADETYPE4-NETWORK-MIB::ipNewCfgRmapState,INTEGER,read-create,,current,enabled(1):disabled(2),Enable or disable the route map.
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.1.11.3.1.8,BLADETYPE4-NETWORK-MIB::ipNewCfgRmapMetricType,INTEGER,read-create,,current,none(1):type1(2):type2(3),The OSPF metric-type of the matched route.
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.1.11.3.1.9,BLADETYPE4-NETWORK-MIB::ipNewCfgRmapDelete,INTEGER,read-create,,current,other(1):delete(2),When set to the value of 2 (delete), the entire row is deleted. 
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.1.11.4,BLADETYPE4-NETWORK-MIB::ipAlistTableMax,Integer32,read-only,,current,,The maximum number of rows in the IP route map table.
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.1.11.5,BLADETYPE4-NETWORK-MIB::ipCurCfgAlistTable,,not-accessible,,current,,The table of IP route map access list configuration in the  current_config.
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.1.11.5.1,BLADETYPE4-NETWORK-MIB::ipCurCfgAlistEntry,,not-accessible,ipCurCfgAlistRmapIndex:ipCurCfgAlistIndex,current,,Information about an IP route map.
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.1.11.5.1.1,BLADETYPE4-NETWORK-MIB::ipCurCfgAlistRmapIndex,Integer32,read-only,,current,,The route map number for which the RMAP is related.
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.1.11.5.1.2,BLADETYPE4-NETWORK-MIB::ipCurCfgAlistIndex,Integer32,read-only,,current,,The access list number for which the access list is related.
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.1.11.5.1.3,BLADETYPE4-NETWORK-MIB::ipCurCfgAlistNwf,INTEGER,read-only,,current,,The network filter number of the route map access list. 
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.1.11.5.1.4,BLADETYPE4-NETWORK-MIB::ipCurCfgAlistMetric,Unsigned32,read-only,,current,,The metric of the route map access list. 4294967295 means none
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.1.11.5.1.5,BLADETYPE4-NETWORK-MIB::ipCurCfgAlistAction,INTEGER,read-only,,current,permit(1):deny(2),Action of the route map access list.
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.1.11.5.1.6,BLADETYPE4-NETWORK-MIB::ipCurCfgAlistState,INTEGER,read-only,,current,enabled(1):disabled(2),Enable or disable the route map access list.
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.1.11.6,BLADETYPE4-NETWORK-MIB::ipNewCfgAlistTable,,not-accessible,,current,,The table of IP route map access list configuration in the  current_config.
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.1.11.6.1,BLADETYPE4-NETWORK-MIB::ipNewCfgAlistEntry,,not-accessible,ipNewCfgAlistRmapIndex:ipNewCfgAlistIndex,current,,Information about an IP route map.
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.1.11.6.1.1,BLADETYPE4-NETWORK-MIB::ipNewCfgAlistRmapIndex,Integer32,read-only,,current,,The route map number for which the RMAP is related.
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.1.11.6.1.2,BLADETYPE4-NETWORK-MIB::ipNewCfgAlistIndex,Integer32,read-only,,current,,The access list number for which the access list is related.
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.1.11.6.1.3,BLADETYPE4-NETWORK-MIB::ipNewCfgAlistNwf,INTEGER,read-create,,current,,The network filter number of the route map access list. 
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.1.11.6.1.4,BLADETYPE4-NETWORK-MIB::ipNewCfgAlistMetric,Unsigned32,read-create,,current,,The metric of the route map access list. 16777215 means none
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.1.11.6.1.5,BLADETYPE4-NETWORK-MIB::ipNewCfgAlistAction,INTEGER,read-create,,current,permit(1):deny(2),Action of the route map access list.
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.1.11.6.1.6,BLADETYPE4-NETWORK-MIB::ipNewCfgAlistState,INTEGER,read-create,,current,enabled(1):disabled(2),Enable or disable the route map access list.
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.1.11.6.1.7,BLADETYPE4-NETWORK-MIB::ipNewCfgAlistDelete,INTEGER,read-create,,current,other(1):delete(2),When set to the value of 2 (delete), the entire row is deleted. 
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.1.13,BLADETYPE4-NETWORK-MIB::ospfCfg,,,,,,
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.1.13.1,BLADETYPE4-NETWORK-MIB::ospfGeneral,,,,,,
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.1.13.1.1,BLADETYPE4-NETWORK-MIB::ospfCurCfgDefaultRouteMetric,INTEGER,read-only,,current,,Specify the metric to be assigned.
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.1.13.1.2,BLADETYPE4-NETWORK-MIB::ospfNewCfgDefaultRouteMetric,INTEGER,read-write,,current,,Specify the metric to be assigned.
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.1.13.1.3,BLADETYPE4-NETWORK-MIB::ospfCurCfgDefaultRouteMetricType,INTEGER,read-only,,current,none(1):type1(2):type2(3),Specify the AS External metric type to be assigned.
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.1.13.1.4,BLADETYPE4-NETWORK-MIB::ospfNewCfgDefaultRouteMetricType,INTEGER,read-write,,current,none(1):type1(2):type2(3),Specify the AS External metric type to be assigned.
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.1.13.1.5,BLADETYPE4-NETWORK-MIB::ospfIntfTableMaxSize,Integer32,read-only,,current,,The maximum number of rows in the OSPF Interface table.
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.1.13.1.6,BLADETYPE4-NETWORK-MIB::ospfAreaTableMaxSize,Integer32,read-only,,current,,The maximum number of rows in the OSPF Area table.
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.1.13.1.7,BLADETYPE4-NETWORK-MIB::ospfRangeTableMaxSize,Integer32,read-only,,current,,The maximum number of rows in the OSPF Range table.
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.1.13.1.8,BLADETYPE4-NETWORK-MIB::ospfVirtIntfTableMaxSize,Integer32,read-only,,current,,The maximum number of rows in the OSPF Virtual Interface table.
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.1.13.1.9,BLADETYPE4-NETWORK-MIB::ospfHostTableMaxSize,Integer32,read-only,,current,,The maximum number of rows in the OSPF Host table.
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.1.13.1.10,BLADETYPE4-NETWORK-MIB::ospfCurCfgState,INTEGER,read-only,,current,on(1):off(2),OSPF global state.
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.1.13.1.11,BLADETYPE4-NETWORK-MIB::ospfNewCfgState,INTEGER,read-write,,current,on(1):off(2),Globally turn OSPF on or off.
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.1.13.1.12,BLADETYPE4-NETWORK-MIB::ospfCurCfgLSDB,Integer32,read-only,,current,,The LSDB limit for external LSA.
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.1.13.1.13,BLADETYPE4-NETWORK-MIB::ospfNewCfgLSDB,Integer32,read-write,,current,,Set the LSDB limit for external LSA.
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.1.13.2,BLADETYPE4-NETWORK-MIB::ospfCurCfgAreaTable,,not-accessible,,current,,The table of OSPF Area configuration in the current_config.
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.1.13.2.1,BLADETYPE4-NETWORK-MIB::ospfCurCfgAreaEntry,,not-accessible,ospfCurCfgAreaIndex,current,,Information about a OSPF area.
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.1.13.2.1.1,BLADETYPE4-NETWORK-MIB::ospfCurCfgAreaIndex,Integer32,read-only,,current,,The OSPF area number for which the OSPF area table is related.
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.1.13.2.1.2,BLADETYPE4-NETWORK-MIB::ospfCurCfgAreaId,IpAddress,read-only,,current,,The IP Address of the OSPF area.
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.1.13.2.1.3,BLADETYPE4-NETWORK-MIB::ospfCurCfgAreaSpfInterval,INTEGER,read-only,,current,,The SPF interval for the OSPF area.
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.1.13.2.1.4,BLADETYPE4-NETWORK-MIB::ospfCurCfgAreaAuthType,INTEGER,read-only,,current,none(1):password(2):md5(3),Type of authentication being used.
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.1.13.2.1.5,BLADETYPE4-NETWORK-MIB::ospfCurCfgAreaType,INTEGER,read-only,,current,transit(0):stub(1):nssa(2),Type of Area.
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.1.13.2.1.6,BLADETYPE4-NETWORK-MIB::ospfCurCfgAreaMetric,INTEGER,read-only,,current,,Metric (1-65535)
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.1.13.2.1.7,BLADETYPE4-NETWORK-MIB::ospfCurCfgAreaStatus,INTEGER,read-only,,current,disabled(0):enabled(1),Status
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.1.13.3,BLADETYPE4-NETWORK-MIB::ospfNewCfgAreaTable,,not-accessible,,current,,The table of OSPF Area configuration in the new_config.
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.1.13.3.1,BLADETYPE4-NETWORK-MIB::ospfNewCfgAreaEntry,,not-accessible,ospfNewCfgAreaIndex,current,,Information about a OSPF area.
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.1.13.3.1.1,BLADETYPE4-NETWORK-MIB::ospfNewCfgAreaIndex,Integer32,read-only,,current,,The OSPF area number for which the OSPF area table is related.
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.1.13.3.1.2,BLADETYPE4-NETWORK-MIB::ospfNewCfgAreaId,IpAddress,read-create,,current,,The IP Address of the OSPF area.
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.1.13.3.1.3,BLADETYPE4-NETWORK-MIB::ospfNewCfgAreaSpfInterval,INTEGER,read-write,,current,,The SPF interval for the OSPF area.
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.1.13.3.1.4,BLADETYPE4-NETWORK-MIB::ospfNewCfgAreaAuthType,INTEGER,read-write,,current,none(1):password(2):md5(3),Type of authentication being used. md5(3) - use MD5 authentication.
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.1.13.3.1.5,BLADETYPE4-NETWORK-MIB::ospfNewCfgAreaType,INTEGER,read-write,,current,transit(0):stub(1):nssa(2),Type of Area. nssa(2)
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.1.13.3.1.6,BLADETYPE4-NETWORK-MIB::ospfNewCfgAreaMetric,INTEGER,read-write,,current,,Metric (1-65535)
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.1.13.3.1.7,BLADETYPE4-NETWORK-MIB::ospfNewCfgAreaStatus,INTEGER,read-write,,current,disabled(0):enabled(1),Status
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.1.13.3.1.8,BLADETYPE4-NETWORK-MIB::ospfNewCfgAreaDelete,INTEGER,read-write,,current,no(0):yes(1),Delete the area yes(1)
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.1.13.4,BLADETYPE4-NETWORK-MIB::ospfRouteRedistribution,,,,,,
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.1.13.4.1,BLADETYPE4-NETWORK-MIB::ospfRedistributeStatic,,,,,,
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.1.13.4.1.1,BLADETYPE4-NETWORK-MIB::ospfCurCfgStaticMetric,INTEGER,read-only,,current,,The metric to be assigned to static routes.  A value of 0 indicates none.
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.1.13.4.1.2,BLADETYPE4-NETWORK-MIB::ospfNewCfgStaticMetric,INTEGER,read-write,,current,,The metric to be assigned to static routes.  A value of 0 indicates none.
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.1.13.4.1.3,BLADETYPE4-NETWORK-MIB::ospfCurCfgStaticMetricType,INTEGER,read-only,,current,none(1):type1(2):type2(3),The AS External metric type for static routes.
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.1.13.4.1.4,BLADETYPE4-NETWORK-MIB::ospfNewCfgStaticMetricType,INTEGER,read-write,,current,none(1):type1(2):type2(3),The AS External metric type for static routes.
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.1.13.4.1.5,BLADETYPE4-NETWORK-MIB::ospfCurCfgStaticOutRmapList,OCTET,read-only,,current,,The route maps present in the out route map list.  The route maps are presented in a bitmap format. in receiving order: OCTET 1 OCTET 2 ..... xxxxxxxx xxxxxxxx ..... || || |_ Rmap 9 || || || ||___ Rmap 8 || |____ Rmap 7 || . . . ||_________ Rmap 2 |__________ Rmap 1 where x : 1 - The represented route map is selected 0 - The represented route map is not selected
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.1.13.4.1.6,BLADETYPE4-NETWORK-MIB::ospfNewCfgStaticOutRmapList,OCTET,read-only,,current,,The route maps present in the out route map list.  The route maps are presented in a bitmap format. in receiving order: OCTET 1 OCTET 2 ..... xxxxxxxx xxxxxxxx ..... || || |_ Rmap 9 || || || ||___ Rmap 8 || |____ Rmap 7 || . . . ||_________ Rmap 2 |__________ Rmap 1 where x : 1 - The represented route map is selected 0 - The represented route map is not selected
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.1.13.4.1.7,BLADETYPE4-NETWORK-MIB::ospfNewCfgStaticAddOutRmap,Integer32,read-write,,current,,The route map to be add into out-rmap list. When read, 0 is returned.
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.1.13.4.1.8,BLADETYPE4-NETWORK-MIB::ospfNewCfgStaticRemoveOutRmap,Integer32,read-write,,current,,The route map to be removed from out-rmap list. When read,  0 is returned.
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.1.13.4.4,BLADETYPE4-NETWORK-MIB::ospfRedistributeFixed,,,,,,
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.1.13.4.4.1,BLADETYPE4-NETWORK-MIB::ospfCurCfgFixedMetric,INTEGER,read-only,,current,,The export metric for fixed routes. A value of 0 indicates none
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.1.13.4.4.2,BLADETYPE4-NETWORK-MIB::ospfNewCfgFixedMetric,INTEGER,read-write,,current,,The export metric for fixed routes. A value of 0 indicates none
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.1.13.4.4.3,BLADETYPE4-NETWORK-MIB::ospfCurCfgFixedMetricType,INTEGER,read-only,,current,none(1):type1(2):type2(3),The AS External metric type for fixed routes.
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.1.13.4.4.4,BLADETYPE4-NETWORK-MIB::ospfNewCfgFixedMetricType,INTEGER,read-write,,current,none(1):type1(2):type2(3),The AS External metric type for fixed routes.
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.1.13.4.4.5,BLADETYPE4-NETWORK-MIB::ospfCurCfgFixedOutRmapList,OCTET,read-only,,current,,The route maps present in the out route map list.  The route maps are presented in a bitmap format. in receiving order: OCTET 1 OCTET 2 ..... xxxxxxxx xxxxxxxx ..... || || |_ Rmap 9 || || || ||___ Rmap 8 || |____ Rmap 7 || . . . ||_________ Rmap 2 |__________ Rmap 1 where x : 1 - The represented route map is selected 0 - The represented route map is not selected
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.1.13.4.4.6,BLADETYPE4-NETWORK-MIB::ospfNewCfgFixedOutRmapList,OCTET,read-only,,current,,The route maps present in the out route map list.  The route maps are presented in a bitmap format. in receiving order: OCTET 1 OCTET 2 ..... xxxxxxxx xxxxxxxx ..... || || |_ Rmap 9 || || || ||___ Rmap 8 || |____ Rmap 7 || . . . ||_________ Rmap 2 |__________ Rmap 1 where x : 1 - The represented route map is selected 0 - The represented route map is not selected
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.1.13.4.4.7,BLADETYPE4-NETWORK-MIB::ospfNewCfgFixedAddOutRmap,Integer32,read-write,,current,,The route map to be add into out-rmap list. When read, 0 is returned.
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.1.13.4.4.8,BLADETYPE4-NETWORK-MIB::ospfNewCfgFixedRemoveOutRmap,Integer32,read-write,,current,,The route map to be removed from out-rmap list. When read,  0 is returned.
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.1.13.4.5,BLADETYPE4-NETWORK-MIB::ospfRedistributeRip,,,,,,
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.1.13.4.5.1,BLADETYPE4-NETWORK-MIB::ospfCurCfgRipMetric,INTEGER,read-only,,current,,The export metric for RIP routes. A value of 0 indicates none
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.1.13.4.5.2,BLADETYPE4-NETWORK-MIB::ospfNewCfgRipMetric,INTEGER,read-write,,current,,The export metric for RIP routes. A value of 0 indicates none
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.1.13.4.5.3,BLADETYPE4-NETWORK-MIB::ospfCurCfgRipMetricType,INTEGER,read-only,,current,none(1):type1(2):type2(3),The AS External metric type for RIP routes.
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.1.13.4.5.4,BLADETYPE4-NETWORK-MIB::ospfNewCfgRipMetricType,INTEGER,read-write,,current,none(1):type1(2):type2(3),The AS External metric type for RIP routes.
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.1.13.4.5.5,BLADETYPE4-NETWORK-MIB::ospfCurCfgRipOutRmapList,OCTET,read-only,,current,,The route maps present in the out route map list.  The route maps are presented in a bitmap format. in receiving order: OCTET 1 OCTET 2 ..... xxxxxxxx xxxxxxxx ..... || || |_ Rmap 9 || || || ||___ Rmap 8 || |____ Rmap 7 || . . . ||_________ Rmap 2 |__________ Rmap 1 where x : 1 - The represented route map is selected 0 - The represented route map is not selected
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.1.13.4.5.6,BLADETYPE4-NETWORK-MIB::ospfNewCfgRipOutRmapList,OCTET,read-only,,current,,The route maps present in the out route map list.  The route maps are presented in a bitmap format. in receiving order: OCTET 1 OCTET 2 ..... xxxxxxxx xxxxxxxx ..... || || |_ Rmap 9 || || || ||___ Rmap 8 || |____ Rmap 7 || . . . ||_________ Rmap 2 |__________ Rmap 1 where x : 1 - The represented route map is selected 0 - The represented route map is not selected
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.1.13.4.5.7,BLADETYPE4-NETWORK-MIB::ospfNewCfgRipAddOutRmap,Integer32,read-write,,current,,The route map to be add into out-rmap list. When read, 0 is returned.
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.1.13.4.5.8,BLADETYPE4-NETWORK-MIB::ospfNewCfgRipRemoveOutRmap,Integer32,read-write,,current,,The route map to be removed from out-rmap list. When read,  0 is returned.
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.1.13.5,BLADETYPE4-NETWORK-MIB::ospfCurCfgMdkeyTable,,not-accessible,,current,,The table of OSPF MD5 keys in the current_config.
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.1.13.5.1,BLADETYPE4-NETWORK-MIB::ospfCurCfgMdkeyEntry,,not-accessible,ospfCurCfgMdkeyIndex,current,,Information about an OSPF MD keys table.
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.1.13.5.1.1,BLADETYPE4-NETWORK-MIB::ospfCurCfgMdkeyIndex,Integer32,read-only,,current,,The OSPF MD5 Key number for which the OSPF MdKey table is related.
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.1.13.5.1.2,BLADETYPE4-NETWORK-MIB::ospfCurCfgMdkeyKey,OCTET,read-only,,current,,The character string representing the MD5 Key.
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.1.13.6,BLADETYPE4-NETWORK-MIB::ospfNewCfgMdkeyTable,,not-accessible,,current,,The table of OSPF MD5 keys in the new_config.
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.1.13.6.1,BLADETYPE4-NETWORK-MIB::ospfNewCfgMdkeyEntry,,not-accessible,ospfNewCfgMdkeyIndex,current,,Information about an OSPF MD keys table.
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.1.13.6.1.1,BLADETYPE4-NETWORK-MIB::ospfNewCfgMdkeyIndex,Integer32,read-only,,current,,The OSPF MD5 Key number for which the OSPF MdKey table is related.
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.1.13.6.1.2,BLADETYPE4-NETWORK-MIB::ospfNewCfgMdkeyKey,OCTET,read-create,,current,,The character string representing the MD5 Key.
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.1.13.6.1.3,BLADETYPE4-NETWORK-MIB::ospfNewCfgMdkeyDelete,INTEGER,read-create,,current,other(1):delete(2),When set to the value of 2 (delete), the entire row is deleted. 
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.1.13.7,BLADETYPE4-NETWORK-MIB::ospfCurCfgIntfTable,,not-accessible,,current,,The table of OSPF Interface configuration in the current_config.
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.1.13.7.1,BLADETYPE4-NETWORK-MIB::ospfCurCfgIntfEntry,,not-accessible,ospfCurCfgIntfIndex,current,,Information about an OSPF Interface.
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.1.13.7.1.1,BLADETYPE4-NETWORK-MIB::ospfCurCfgIntfIndex,Integer32,read-only,,current,,The OSPF Interface number for which the OSPF Interface table is related.
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.1.13.7.1.2,BLADETYPE4-NETWORK-MIB::ospfCurCfgIntfId,IpAddress,read-only,,current,,The IP Address of the OSPF interface.
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.1.13.7.1.3,BLADETYPE4-NETWORK-MIB::ospfCurCfgIntfArea,INTEGER,read-only,,current,,The index of the area that the interface belongs
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.1.13.7.1.4,BLADETYPE4-NETWORK-MIB::ospfCurCfgIntfMdkey,INTEGER,read-only,,current,,The MD5 key for the OSPF interface 0 (none) no MD5 authentication.
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.1.13.7.1.5,BLADETYPE4-NETWORK-MIB::ospfCurCfgIntfCost,INTEGER,read-only,,current,,Interface cost
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.1.13.7.1.6,BLADETYPE4-NETWORK-MIB::ospfCurCfgIntfPrio,INTEGER,read-only,,current,,Interface router priority
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.1.13.7.1.7,BLADETYPE4-NETWORK-MIB::ospfCurCfgIntfHello,INTEGER,read-only,,current,,Hello interval
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.1.13.7.1.9,BLADETYPE4-NETWORK-MIB::ospfCurCfgIntfDead,INTEGER,read-only,,current,,Dead interval
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.1.13.7.1.11,BLADETYPE4-NETWORK-MIB::ospfCurCfgIntfTrans,INTEGER,read-only,,current,,Transit delay
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.1.13.7.1.12,BLADETYPE4-NETWORK-MIB::ospfCurCfgIntfRetra,INTEGER,read-only,,current,,Retransmit interval
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.1.13.7.1.13,BLADETYPE4-NETWORK-MIB::ospfCurCfgIntfAuthKey,OCTET,read-only,,current,,Authentication Key
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.1.13.7.1.15,BLADETYPE4-NETWORK-MIB::ospfCurCfgIntfStatus,INTEGER,read-only,,current,disabled(0):enabled(1),Status of the interface enabled(1)
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.1.13.8,BLADETYPE4-NETWORK-MIB::ospfNewCfgIntfTable,,not-accessible,,current,,The table of OSPF Interface configuration in the new_config.
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.1.13.8.1,BLADETYPE4-NETWORK-MIB::ospfNewCfgIntfEntry,,not-accessible,ospfNewCfgIntfIndex,current,,Information about an OSPF Interface.
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.1.13.8.1.1,BLADETYPE4-NETWORK-MIB::ospfNewCfgIntfIndex,Integer32,read-only,,current,,The OSPF Interface number for which the OSPF Interface table is related.
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.1.13.8.1.2,BLADETYPE4-NETWORK-MIB::ospfNewCfgIntfId,IpAddress,read-only,,current,,The IP Address of the OSPF interface.
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.1.13.8.1.3,BLADETYPE4-NETWORK-MIB::ospfNewCfgIntfArea,INTEGER,read-create,,current,,The index of the area that the interface belongs (0..2)
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.1.13.8.1.4,BLADETYPE4-NETWORK-MIB::ospfNewCfgIntfMdkey,INTEGER,read-create,,current,,The MD5 key for the OSPF interface 0 (none) no MD5 authentication.
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.1.13.8.1.5,BLADETYPE4-NETWORK-MIB::ospfNewCfgIntfCost,INTEGER,read-create,,current,,Interface cost(1..65535)
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.1.13.8.1.6,BLADETYPE4-NETWORK-MIB::ospfNewCfgIntfPrio,INTEGER,read-create,,current,,Interface router priority(0..255)
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.1.13.8.1.7,BLADETYPE4-NETWORK-MIB::ospfNewCfgIntfHello,INTEGER,read-create,,current,,Hello interval(1..65535)
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.1.13.8.1.9,BLADETYPE4-NETWORK-MIB::ospfNewCfgIntfDead,INTEGER,read-create,,current,,Dead interval(1..65535)
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.1.13.8.1.11,BLADETYPE4-NETWORK-MIB::ospfNewCfgIntfTrans,INTEGER,read-create,,current,,Transit delay(1..3600)
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.1.13.8.1.12,BLADETYPE4-NETWORK-MIB::ospfNewCfgIntfRetra,INTEGER,read-create,,current,,Retransmit interval(1..3600)
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.1.13.8.1.13,BLADETYPE4-NETWORK-MIB::ospfNewCfgIntfAuthKey,OCTET,read-create,,current,,Authentication Key
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.1.13.8.1.15,BLADETYPE4-NETWORK-MIB::ospfNewCfgIntfStatus,INTEGER,read-create,,current,disabled(0):enabled(1),Status of the interface enabled(1)
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.1.13.8.1.16,BLADETYPE4-NETWORK-MIB::ospfNewCfgIntfDelete,INTEGER,read-write,,current,other(0):delete(1),Delete the interface other(0), delete(1)
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.1.13.9,BLADETYPE4-NETWORK-MIB::ospfCurCfgVirtIntfTable,,not-accessible,,current,,The table of OSPF Virtual Interface configuration in the current_config.
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.1.13.9.1,BLADETYPE4-NETWORK-MIB::ospfCurCfgVirtIntfEntry,,not-accessible,ospfCurCfgVirtIntfIndex,current,,Information about an OSPF virtual Interface.
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.1.13.9.1.1,BLADETYPE4-NETWORK-MIB::ospfCurCfgVirtIntfIndex,Integer32,read-only,,current,,The OSPF Virtual Interface number for which the OSPF  Virtual Interface table is related.
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.1.13.9.1.2,BLADETYPE4-NETWORK-MIB::ospfCurCfgVirtIntfAreaId,INTEGER,read-only,,current,,The index of the OSPF area to which this virtual interface belongs.
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.1.13.9.1.3,BLADETYPE4-NETWORK-MIB::ospfCurCfgVirtIntfNbr,IpAddress,read-only,,current,,The IP Address of the OSPF neighbor for this virtual interface.
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.1.13.9.1.4,BLADETYPE4-NETWORK-MIB::ospfCurCfgVirtIntfMdkey,INTEGER,read-only,,current,,The MD5 key for the OSPF virtual interface 0 (none) no MD5 authentication.
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.1.13.9.1.5,BLADETYPE4-NETWORK-MIB::ospfCurCfgVirtIntfHello,INTEGER,read-only,,current,,Hello interval
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.1.13.9.1.7,BLADETYPE4-NETWORK-MIB::ospfCurCfgVirtIntfDead,INTEGER,read-only,,current,,Dead interval
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.1.13.9.1.9,BLADETYPE4-NETWORK-MIB::ospfCurCfgVirtIntfTrans,INTEGER,read-only,,current,,Transit delay
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.1.13.9.1.10,BLADETYPE4-NETWORK-MIB::ospfCurCfgVirtIntfRetra,INTEGER,read-only,,current,,Retransmit interval
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.1.13.9.1.11,BLADETYPE4-NETWORK-MIB::ospfCurCfgVirtIntfAuthKey,OCTET,read-only,,current,,Authentication Key
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.1.13.9.1.12,BLADETYPE4-NETWORK-MIB::ospfCurCfgVirtIntfStatus,INTEGER,read-only,,current,disabled(0):enabled(1),Status enabled(1)
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.1.13.10,BLADETYPE4-NETWORK-MIB::ospfNewCfgVirtIntfTable,,not-accessible,,current,,The table of OSPF Virtual Interface configuration in the new_config.
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.1.13.10.1,BLADETYPE4-NETWORK-MIB::ospfNewCfgVirtIntfEntry,,not-accessible,ospfNewCfgVirtIntfIndex,current,,Information about an OSPF virtual Interface.
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.1.13.10.1.1,BLADETYPE4-NETWORK-MIB::ospfNewCfgVirtIntfIndex,Integer32,read-only,,current,,The OSPF Virtual Interface number for which the OSPF  Virtual Interface table is related.
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.1.13.10.1.2,BLADETYPE4-NETWORK-MIB::ospfNewCfgVirtIntfAreaId,INTEGER,read-create,,current,,The index of the OSPF area to which this virtual interface belongs.
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.1.13.10.1.3,BLADETYPE4-NETWORK-MIB::ospfNewCfgVirtIntfNbr,IpAddress,read-create,,current,,The IP Address of the OSPF neighbor for this virtual interface.
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.1.13.10.1.4,BLADETYPE4-NETWORK-MIB::ospfNewCfgVirtIntfMdkey,INTEGER,read-create,,current,,The MD5 key for the OSPF virtual interface 0 (none) no MD5 authentication.
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.1.13.10.1.5,BLADETYPE4-NETWORK-MIB::ospfNewCfgVirtIntfHello,INTEGER,read-create,,current,,Hello interval(1..65535)
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.1.13.10.1.7,BLADETYPE4-NETWORK-MIB::ospfNewCfgVirtIntfDead,INTEGER,read-create,,current,,Dead interval(1..65535)
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.1.13.10.1.9,BLADETYPE4-NETWORK-MIB::ospfNewCfgVirtIntfTrans,INTEGER,read-create,,current,,Transit dela(1..3600)y
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.1.13.10.1.10,BLADETYPE4-NETWORK-MIB::ospfNewCfgVirtIntfRetra,INTEGER,read-create,,current,,Retransmit interval(1..3600)
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.1.13.10.1.11,BLADETYPE4-NETWORK-MIB::ospfNewCfgVirtIntfAuthKey,OCTET,read-create,,current,,Authentication Key SIZE(0..8)
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.1.13.10.1.12,BLADETYPE4-NETWORK-MIB::ospfNewCfgVirtIntfStatus,INTEGER,read-create,,current,disabled(0):enabled(1),Status  disabled(0), enabled(1) 
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.1.13.10.1.13,BLADETYPE4-NETWORK-MIB::ospfNewCfgVirtIntfDelete,INTEGER,read-write,,current,other(0):delete(1),Delete delete(1)
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.1.13.11,BLADETYPE4-NETWORK-MIB::ospfMdkeyTableMaxSize,Integer32,read-only,,current,,The maximum number of rows in the OSPF Mdkey table.
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.1.13.12,BLADETYPE4-NETWORK-MIB::ospfCurCfgHostTable,,not-accessible,,current,,The table of OSPF Host configuration.
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.1.13.12.1,BLADETYPE4-NETWORK-MIB::ospfCurCfgHostEntry,,not-accessible,ospfCurCfgHostIndex,current,,Information about a OSPF host.
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.1.13.12.1.1,BLADETYPE4-NETWORK-MIB::ospfCurCfgHostIndex,Integer32,read-only,,current,,The OSPF host number for which the OSPF host table is related.
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.1.13.12.1.2,BLADETYPE4-NETWORK-MIB::ospfCurCfgHostIpAddr,IpAddress,read-only,,current,,The IP Address of the OSPF host.
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.1.13.12.1.3,BLADETYPE4-NETWORK-MIB::ospfCurCfgHostAreaIndex,Integer32,read-only,,current,,The area index.
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.1.13.12.1.4,BLADETYPE4-NETWORK-MIB::ospfCurCfgHostCost,INTEGER,read-only,,current,,The cost of the OSPF host.
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.1.13.12.1.5,BLADETYPE4-NETWORK-MIB::ospfCurCfgHostState,INTEGER,read-only,,current,enabled(2):disabled(3),Enable or disable an OSPF Host
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.1.13.13,BLADETYPE4-NETWORK-MIB::ospfNewCfgHostTable,,not-accessible,,current,,The table of OSPF Host configuration.
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.1.13.13.1,BLADETYPE4-NETWORK-MIB::ospfNewCfgHostEntry,,not-accessible,ospfNewCfgHostIndex,current,,Information about a OSPF host.
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.1.13.13.1.1,BLADETYPE4-NETWORK-MIB::ospfNewCfgHostIndex,Integer32,read-only,,current,,The OSPF host number for which the OSPF host table is related.
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.1.13.13.1.2,BLADETYPE4-NETWORK-MIB::ospfNewCfgHostIpAddr,IpAddress,read-create,,current,,The IP Address of the OSPF host.
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.1.13.13.1.3,BLADETYPE4-NETWORK-MIB::ospfNewCfgHostAreaIndex,Integer32,read-create,,current,,The OSPF area index.
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.1.13.13.1.4,BLADETYPE4-NETWORK-MIB::ospfNewCfgHostCost,INTEGER,read-create,,current,,The cost of the OSPF host.
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.1.13.13.1.5,BLADETYPE4-NETWORK-MIB::ospfNewCfgHostState,INTEGER,read-create,,current,enabled(2):disabled(3),Enable or disable an OSPF Host
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.1.13.13.1.6,BLADETYPE4-NETWORK-MIB::ospfNewCfgHostDelete,INTEGER,read-write,,current,no(0):yes(1),Delete the OSPF host: no(0), yes(1)
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.1.13.14,BLADETYPE4-NETWORK-MIB::ospfCurCfgRangeTable,,not-accessible,,current,,The table of OSPF summary range in the current configuration.
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.1.13.14.1,BLADETYPE4-NETWORK-MIB::ospfCurCfgRangeEntry,,not-accessible,ospfCurCfgRangeIndex,current,,Information about an OSPF summary range.
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.1.13.14.1.1,BLADETYPE4-NETWORK-MIB::ospfCurCfgRangeIndex,Integer32,read-only,,current,,The range number for which the OSPF summary range table is related.
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.1.13.14.1.2,BLADETYPE4-NETWORK-MIB::ospfCurCfgRangeAddr,IpAddress,read-only,,current,,The IP Address of the range.
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.1.13.14.1.3,BLADETYPE4-NETWORK-MIB::ospfCurCfgRangeMask,IpAddress,read-only,,current,,The mask of the range.
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.1.13.14.1.4,BLADETYPE4-NETWORK-MIB::ospfCurCfgRangeAreaIndex,Integer32,read-only,,current,,The area index.
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.1.13.14.1.5,BLADETYPE4-NETWORK-MIB::ospfCurCfgRangeHideState,INTEGER,read-only,,current,enabled(1):disabled(2),The state of the hide range.
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.1.13.14.1.6,BLADETYPE4-NETWORK-MIB::ospfCurCfgRangeState,INTEGER,read-only,,current,enabled(1):disabled(2),The state of the range.
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.1.13.15,BLADETYPE4-NETWORK-MIB::ospfNewCfgRangeTable,,not-accessible,,current,,The table of OSPF summary range in the new configuration.
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.1.13.15.1,BLADETYPE4-NETWORK-MIB::ospfNewCfgRangeEntry,,not-accessible,ospfNewCfgRangeIndex,current,,Information about an OSPF summary range.
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.1.13.15.1.1,BLADETYPE4-NETWORK-MIB::ospfNewCfgRangeIndex,Integer32,read-only,,current,,The range number for which the OSPF summary range table is related.
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.1.13.15.1.2,BLADETYPE4-NETWORK-MIB::ospfNewCfgRangeAddr,IpAddress,read-create,,current,,The IP Address of the range.
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.1.13.15.1.3,BLADETYPE4-NETWORK-MIB::ospfNewCfgRangeMask,IpAddress,read-create,,current,,The mask of the range.
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.1.13.15.1.4,BLADETYPE4-NETWORK-MIB::ospfNewCfgRangeAreaIndex,Integer32,read-create,,current,,The area index.
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.1.13.15.1.5,BLADETYPE4-NETWORK-MIB::ospfNewCfgRangeHideState,INTEGER,read-create,,current,enabled(1):disabled(2),The state of the hide range.
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.1.13.15.1.6,BLADETYPE4-NETWORK-MIB::ospfNewCfgRangeState,INTEGER,read-create,,current,enabled(1):disabled(2),The state of the range.
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.1.13.15.1.7,BLADETYPE4-NETWORK-MIB::ospfNewCfgRangeDelete,INTEGER,read-create,,current,other(1):delete(2),When set to the value of 2 (delete), the entire row is deleted. When read, other(1) is returned. Setting the value to anything other than 2(delete) has no effect on the state of the row.
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.1.14,BLADETYPE4-NETWORK-MIB::ipGeneralCfg,,,,,,
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.1.14.1,BLADETYPE4-NETWORK-MIB::ipCurCfgRouterID,IpAddress,read-only,,current,,The router ID of the switch.
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.1.14.2,BLADETYPE4-NETWORK-MIB::ipNewCfgRouterID,IpAddress,read-write,,current,,The router ID of the switch.
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.1.15,BLADETYPE4-NETWORK-MIB::igmpCfg,,,,,,
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.1.15.1,BLADETYPE4-NETWORK-MIB::igmpCurCfgOnOff,INTEGER,read-only,,current,on(1):off(2),Globally turn IGMP On/Off.
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.1.15.2,BLADETYPE4-NETWORK-MIB::igmpNewCfgOnOff,INTEGER,read-write,,current,on(1):off(2),Globally turn IGMP On/Off.
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.1.15.3,BLADETYPE4-NETWORK-MIB::igmpSnoopCfgGen,,,,,,
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.1.15.3.1,BLADETYPE4-NETWORK-MIB::igmpSnoopCfg,,,,,,
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.1.15.3.1.1,BLADETYPE4-NETWORK-MIB::igmpSnoopCurCfgTimeout,Integer32,read-only,,current,,Set IGMP Report timeout.
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.1.15.3.1.2,BLADETYPE4-NETWORK-MIB::igmpSnoopNewCfgTimeout,Integer32,read-write,,current,,Set IGMP Report timeout.
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.1.15.3.1.3,BLADETYPE4-NETWORK-MIB::igmpSnoopCurCfgMrto,Integer32,read-only,,current,,The value of multicast router timeout in the current config.
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.1.15.3.1.4,BLADETYPE4-NETWORK-MIB::igmpSnoopNewCfgMrto,Integer32,read-write,,current,,The value of multicast router timeout in the new config.
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.1.15.3.1.12,BLADETYPE4-NETWORK-MIB::igmpSnoopNewCfgVlanFastlvAdd,Integer32,read-write,,current,,The VLAN to be added to fastleave vlan list. When read,
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.1.15.3.1.13,BLADETYPE4-NETWORK-MIB::igmpSnoopNewCfgVlanFastlvRem,Integer32,read-write,,current,,The VLAN to be removed from fastleave vlan list. When read,
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.1.15.3.1.14,BLADETYPE4-NETWORK-MIB::igmpSnoopCurCfgVlanFastlvBmap,OCTET,read-only,,current,,The fastlv enabled vlans present in the in vlan map list.  The fastlv enabled vlans are presented in a bitmap format. in receiving order: OCTET 1 OCTET 2 ..... xxxxxxxx xxxxxxxx ..... || || |_ Vlan 9 || || || ||___ Vlan 8 || |____ Vlan 7 || . . . ||_________ Vlan 2 |__________ Vlan 1 where x : 1 - The represented vlan has fastlv enabled 0 - The represented vlan does not have fastlv enabled.
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.1.15.3.1.15,BLADETYPE4-NETWORK-MIB::igmpSnoopNewCfgVlanFastlvBmap,OCTET,read-only,,current,,The fastlv enabled vlans present in the in vlan map list.  The fastlv enabled vlans are presented in a bitmap format. in receiving order: OCTET 1 OCTET 2 ..... xxxxxxxx xxxxxxxx ..... || || |_ Vlan 9 || || || ||___ Vlan 8 || |____ Vlan 7 || . . . ||_________ Vlan 2 |__________ Vlan 1 where x : 1 - The represented vlan has fastlv enabled 0 - The represented vlan does not have fastlv enabled.
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.1.15.3.1.16,BLADETYPE4-NETWORK-MIB::igmpSnoopCurCfgRobust,Integer32,read-only,,current,,The value of expected packet loss on subnet in the current config.
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.1.15.3.1.17,BLADETYPE4-NETWORK-MIB::igmpSnoopNewCfgRobust,Integer32,read-write,,current,,The value of expected packet loss on subnet in the new config.
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.1.15.3.1.18,BLADETYPE4-NETWORK-MIB::igmpSnoopNewCfgVlanAdd,Integer32,read-write,,current,,The VLAN to be added to snooping vlan list. When read, 0 is returned.
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.1.15.3.1.19,BLADETYPE4-NETWORK-MIB::igmpSnoopNewCfgVlanRem,Integer32,read-write,,current,,The VLAN to be removed from snooping vlan list. When read, 0 is returned.
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.1.15.3.1.20,BLADETYPE4-NETWORK-MIB::igmpSnoopNewCfgVlanClear,INTEGER,read-write,,current,clear(1):ok(2),Removing ALL Snooping Vlans.
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.1.15.3.1.21,BLADETYPE4-NETWORK-MIB::igmpSnoopCurCfgVlanBmap,OCTET,read-only,,current,,The snooping vlans present in the in vlan map list. The snooping vlans are presented in a bitmap format. in receiving order: OCTET 1 OCTET 2 ..... xxxxxxxx xxxxxxxx ..... || || |_ Vlan 9 || || || ||___ Vlan 8 || |____ Vlan 7 || . . . ||_________ Vlan 2 |__________ Vlan 1 where x : 1 - The represented vlan has snoop enabled 0 - The represented vlan does not have snooping enabled.
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.1.15.3.1.22,BLADETYPE4-NETWORK-MIB::igmpSnoopNewCfgVlanBmap,OCTET,read-only,,current,,The snooping vlans present in the in vlan map list. The snooping vlans are presented in a bitmap format. in receiving order: OCTET 1 OCTET 2 ..... xxxxxxxx xxxxxxxx ..... || || |_ Vlan 9 || || || ||___ Vlan 8 || |____ Vlan 7 || . . . ||_________ Vlan 2 |__________ Vlan 1 where x : 1 - The represented vlan has snoop enabled 0 - The represented vlan does not have snooping enabled.
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.1.15.3.1.23,BLADETYPE4-NETWORK-MIB::igmpSnoopCurCfgQInterval,Integer32,read-only,,current,,IGMP Query Interval of current config.
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.1.15.3.1.24,BLADETYPE4-NETWORK-MIB::igmpSnoopNewCfgQInterval,Integer32,read-write,,current,,IGMP Query Interval of new config.
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.1.15.3.1.25,BLADETYPE4-NETWORK-MIB::igmpSnoopCurCfgSrcIp,IpAddress,read-only,,current,,The source ip for GSQ proxy in current config.
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.1.15.3.1.26,BLADETYPE4-NETWORK-MIB::igmpSnoopNewCfgSrcIp,IpAddress,read-write,,current,,The source ip for GSQ proxy in new config.
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.1.15.3.1.27,BLADETYPE4-NETWORK-MIB::igmpSnoopCurCfgAggrEnaDis,INTEGER,read-only,,current,enable(1):disable(2),Enable/Disable of IGMP Report aggregation.
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.1.15.3.1.28,BLADETYPE4-NETWORK-MIB::igmpSnoopNewCfgAggrEnaDis,INTEGER,read-write,,current,enable(1):disable(2),Enable/Disable of IGMP Report aggregation.
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.1.15.3.1.29,BLADETYPE4-NETWORK-MIB::igmpSnoopCurCfgFlood,INTEGER,read-only,,current,enable(1):disable(2),Enable/Disable of flood unregistered IPMC
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.1.15.3.1.30,BLADETYPE4-NETWORK-MIB::igmpSnoopNewCfgFlood,INTEGER,read-write,,current,enable(1):disable(2),Enable/Disable of flood unregistered IPMC
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.1.15.3.1.31,BLADETYPE4-NETWORK-MIB::igmpSnoopCurCfgCpu,INTEGER,read-only,,current,enable(1):disable(2),Enable/Disable unregistered IPMC to CPU.
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.1.15.3.1.32,BLADETYPE4-NETWORK-MIB::igmpSnoopNewCfgCpu,INTEGER,read-write,,current,enable(1):disable(2),Enable/Disable unregistered IPMC to CPU.
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.1.15.4,BLADETYPE4-NETWORK-MIB::igmpStaticMrtrCfg,,,,,,
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.1.15.4.1,BLADETYPE4-NETWORK-MIB::igmpStaticMrtrCurCfgTable,,not-accessible,,current,,The IGMP Static Multicast Router table in the current configuration block.
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.1.15.4.1.1,BLADETYPE4-NETWORK-MIB::igmpStaticMrtrCurCfgTableEntry,,not-accessible,igmpStaticMrtrCurCfgIndx,current,,A row in the Static Multicast Router table.
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.1.15.4.1.1.1,BLADETYPE4-NETWORK-MIB::igmpStaticMrtrCurCfgIndx,Integer32,read-only,,current,,The IGMP Multicast Router table port index.
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.1.15.4.1.1.2,BLADETYPE4-NETWORK-MIB::igmpStaticMrtrCurCfgPortId,Unsigned32,read-only,,current,,The IGMP Multicast Router port in the current configuration block.
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.1.15.4.1.1.3,BLADETYPE4-NETWORK-MIB::igmpStaticMrtrCurCfgVlanId,Integer32,read-only,,current,,The IGMP Multicast Router port in the current configuration block.
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.1.15.4.1.1.4,BLADETYPE4-NETWORK-MIB::igmpStaticMrtrCurCfgVersion,INTEGER,read-only,,current,version1(1):version2(2),The IGMP version of the IGMP Static Multicast Router.
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.1.15.4.2,BLADETYPE4-NETWORK-MIB::igmpStaticMrtrNewCfgTable,,not-accessible,,current,,The IGMP Static Multicast Router table in the new configuration block.
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.1.15.4.2.1,BLADETYPE4-NETWORK-MIB::igmpStaticMrtrNewCfgTableEntry,,not-accessible,igmpStaticMrtrNewCfgIndx,current,,A row in the Static Multicast Router table.
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.1.15.4.2.1.1,BLADETYPE4-NETWORK-MIB::igmpStaticMrtrNewCfgIndx,Integer32,read-only,,current,,The IGMP Multicast Router table port index.
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.1.15.4.2.1.2,BLADETYPE4-NETWORK-MIB::igmpStaticMrtrNewCfgPortId,Unsigned32,read-create,,current,,The IGMP Multicast Router port in the new configuration block.
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.1.15.4.2.1.3,BLADETYPE4-NETWORK-MIB::igmpStaticMrtrNewCfgVlanId,Integer32,read-create,,current,,The IGMP Multicast Router port in the new configuration block.
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.1.15.4.2.1.4,BLADETYPE4-NETWORK-MIB::igmpStaticMrtrNewCfgVersion,INTEGER,read-create,,current,version1(1):version2(2),The IGMP version of the IGMP Static Multicast Router.
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.1.15.4.2.1.5,BLADETYPE4-NETWORK-MIB::igmpStaticMrtrNewCfgDelete,INTEGER,read-create,,current,other(1):delete(2),When set to the value of 2 (delete), the entire row is deleted. When read, other(1) is returned. Setting the value to anything other than 2(delete) has no effect on the state of the row.
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.1.15.5,BLADETYPE4-NETWORK-MIB::igmpFilterCfg,,,,,,
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.1.15.5.1,BLADETYPE4-NETWORK-MIB::igmpFltCurCfgTable,,not-accessible,,current,,The IGMP filtering table in the current configuration block.
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.1.15.5.1.1,BLADETYPE4-NETWORK-MIB::igmpFltCurCfgTableEntry,,not-accessible,igmpFltCurCfgIndx,current,,A row in the filtering table.
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.1.15.5.1.1.1,BLADETYPE4-NETWORK-MIB::igmpFltCurCfgIndx,Integer32,read-only,,current,,The IGMP filter table index.
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.1.15.5.1.1.2,BLADETYPE4-NETWORK-MIB::igmpFltCurCfgMcastIp1,IpAddress,read-only,,current,,Range1 Multicast IP address to be filtered.
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.1.15.5.1.1.3,BLADETYPE4-NETWORK-MIB::igmpFltCurCfgMcastIp2,IpAddress,read-only,,current,,Range2 Multicast IP address to be filtered.
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.1.15.5.1.1.4,BLADETYPE4-NETWORK-MIB::igmpFltCurCfgAction,INTEGER,read-only,,current,allow(1):deny(2),The action for the IGMP filtering rule.
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.1.15.5.1.1.5,BLADETYPE4-NETWORK-MIB::igmpFltCurCfgState,INTEGER,read-only,,current,enabled(1):disabled(2),The state of this IGMP filtering rule.
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.1.15.5.2,BLADETYPE4-NETWORK-MIB::igmpFltNewCfgTable,,not-accessible,,current,,The IGMP filtering table in the current configuration block.
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.1.15.5.2.1,BLADETYPE4-NETWORK-MIB::igmpFltNewCfgTableEntry,,not-accessible,igmpFltNewCfgIndx,current,,A row in the filtering table.
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.1.15.5.2.1.1,BLADETYPE4-NETWORK-MIB::igmpFltNewCfgIndx,Integer32,read-only,,current,,The IGMP filter table index.
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.1.15.5.2.1.2,BLADETYPE4-NETWORK-MIB::igmpFltNewCfgMcastIp1,IpAddress,read-create,,current,,Range1 Multicast source IP address to be filtered.
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.1.15.5.2.1.3,BLADETYPE4-NETWORK-MIB::igmpFltNewCfgMcastIp2,IpAddress,read-create,,current,,Range2 Multicast source IP address to be filtered.
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.1.15.5.2.1.4,BLADETYPE4-NETWORK-MIB::igmpFltNewCfgAction,INTEGER,read-create,,current,allow(1):deny(2),The action for the IGMP filtering rule.
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.1.15.5.2.1.5,BLADETYPE4-NETWORK-MIB::igmpFltNewCfgState,INTEGER,read-create,,current,enabled(1):disabled(2),The state of this IGMP filtering rule.
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.1.15.5.2.1.6,BLADETYPE4-NETWORK-MIB::igmpFltNewCfgDelete,INTEGER,read-create,,current,other(1):delete(2),When set to the value of 2 (delete), the entire row is deleted.  When read, other(1) is returned. Setting the value to anything  other than 2(delete) has no effect on the state of the row.
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.1.15.5.3,BLADETYPE4-NETWORK-MIB::igmpFltCurCfgPortTable,,not-accessible,,current,,The IGMP filtering port table in the current configuration block.
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.1.15.5.3.1,BLADETYPE4-NETWORK-MIB::igmpFltCurCfgPortTableEntry,,not-accessible,igmpFltCurCfgPortIndx,current,,A row in the IGMP filtering port table.
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.1.15.5.3.1.1,BLADETYPE4-NETWORK-MIB::igmpFltCurCfgPortIndx,Unsigned32,read-only,,current,,The port index.
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.1.15.5.3.1.2,BLADETYPE4-NETWORK-MIB::igmpFltCurCfgPortState,INTEGER,read-only,,current,enabled(1):disabled(2),Enable or disable IGMP filtering.
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.1.15.5.3.1.3,BLADETYPE4-NETWORK-MIB::igmpFltCurCfgPortFiltBmap,OCTET,read-only,,current,,The IGMP filtering rules applied to the port. The filtering rules are  presented in bitmap format. xxxxxxxx xxxxxxxx .....  || || |_ filter 9 || ||  || ||___ filter 8 || |____ filter 7 || . . . ||_________ filter 2 |__________ filter 1 (as index to igmpFltCurCfgTable) where x : 1 - The represented IGMP filter rule applied to the port
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.1.15.5.4,BLADETYPE4-NETWORK-MIB::igmpFltNewCfgPortTable,,not-accessible,,current,,The IGMP filtering port table in the new configuration block.
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.1.15.5.4.1,BLADETYPE4-NETWORK-MIB::igmpFltNewCfgPortTableEntry,,not-accessible,igmpFltNewCfgPortIndx,current,,A row in the IGMP filtering port table.
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.1.15.5.4.1.1,BLADETYPE4-NETWORK-MIB::igmpFltNewCfgPortIndx,Unsigned32,read-only,,current,,The port index.
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.1.15.5.4.1.2,BLADETYPE4-NETWORK-MIB::igmpFltNewCfgPortState,INTEGER,read-create,,current,enabled(1):disabled(2),Enable or disable IGMP filtering.
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.1.15.5.4.1.3,BLADETYPE4-NETWORK-MIB::igmpFltNewCfgPortFiltBmap,OCTET,read-only,,current,,The IGMP filtering rules applied to the port. The filtering rules are presented in bitmap format. in receiving order: xxxxxxxx xxxxxxxx .....  || || |_ filter 9 || ||  || ||___ filter 8 || |____ filter 7 || . . . ||_________ filter 2 |__________ filter 1 (as index to fltNewCfgTable) where x : 1 - The represented filter rule applied to the port
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.1.15.5.4.1.4,BLADETYPE4-NETWORK-MIB::igmpFltNewCfgPortAddFiltRule,Integer32,read-create,,current,,This is an action object to add filtering rule to a port. The value  specified with this object is the index to the fltNewCfgTable for  which filtering rule to be added to the port. The range of the  valid index is between 1 and igmpFltCurCfgTableMaxSize. When read, the  value '0' is returned always.
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.1.15.5.4.1.5,BLADETYPE4-NETWORK-MIB::igmpFltNewCfgPortRemFiltRule,Integer32,read-create,,current,,This is an action object to remove filtering rule from a port. The  value specified with this object is the index to the fltNewCfgTable  for which filtering rule to be removed from the port. The range of  the valid index is between 1 and igmpFltCurCfgTableMaxSize. When read,  the value '0' is returned always.
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.1.15.5.5,BLADETYPE4-NETWORK-MIB::igmpFltCurCfgEnaDis,INTEGER,read-only,,current,enable(1):disable(2),Enable/Disable of IGMP Filtering.
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.1.15.5.6,BLADETYPE4-NETWORK-MIB::igmpFltNewCfgEnaDis,INTEGER,read-write,,current,enable(1):disable(2),Enable/Disable of IGMP Filtering.
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.1.18,BLADETYPE4-NETWORK-MIB::rip2Cfg,,,,,,
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.1.18.1,BLADETYPE4-NETWORK-MIB::ripCurCfgIntfTable,,not-accessible,,current,,The table of RIP on IP interface configuration in the current_config.
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.1.18.1.1,BLADETYPE4-NETWORK-MIB::ripCurCfgIntfEntry,,not-accessible,ripCurCfgIntfIndex,current,,Information about RIP on IP interface.
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.1.18.1.1.1,BLADETYPE4-NETWORK-MIB::ripCurCfgIntfIndex,INTEGER,read-only,,current,,The interface number for which the RIP information is related.
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.1.18.1.1.2,BLADETYPE4-NETWORK-MIB::ripCurCfgIntfVersion,INTEGER,read-only,,current,ripVersion1(1):ripVersion2(2):ripVersionBoth(3),RIP version.
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.1.18.1.1.3,BLADETYPE4-NETWORK-MIB::ripCurCfgIntfSupply,INTEGER,read-only,,current,enabled(1):disabled(2),Enable or disable supplying route updates.
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.1.18.1.1.4,BLADETYPE4-NETWORK-MIB::ripCurCfgIntfListen,INTEGER,read-only,,current,enabled(1):disabled(2),Enable or disable listening to route updates.
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.1.18.1.1.5,BLADETYPE4-NETWORK-MIB::ripCurCfgIntfDefault,INTEGER,read-only,,current,both(1):listen(2):supply(3):none(4),Specifies what RIP does with default routes.
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.1.18.1.1.6,BLADETYPE4-NETWORK-MIB::ripCurCfgIntfTrigUpdate,INTEGER,read-only,,current,enabled(1):disabled(2),Enable or disable tirggered updates.
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.1.18.1.1.7,BLADETYPE4-NETWORK-MIB::ripCurCfgIntfMcastUpdate,INTEGER,read-only,,current,enabled(1):disabled(2),Enable or disable multicast updates.
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.1.18.1.1.8,BLADETYPE4-NETWORK-MIB::ripCurCfgIntfPoisonReverse,INTEGER,read-only,,current,enabled(1):disabled(2),RIP poison reverse.
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.1.18.1.1.9,BLADETYPE4-NETWORK-MIB::ripCurCfgIntfState,INTEGER,read-only,,current,enabled(1):disabled(2),Enable or disable RIP protocol.
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.1.18.1.1.10,BLADETYPE4-NETWORK-MIB::ripCurCfgIntfMetric,INTEGER,read-only,,current,,RIP route metric for this interface.
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.1.18.1.1.11,BLADETYPE4-NETWORK-MIB::ripCurCfgIntfAuth,INTEGER,read-only,,current,none(1):password(2),Enable or disable RIP update authorization with a  simple plain text password.
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.1.18.1.1.12,BLADETYPE4-NETWORK-MIB::ripCurCfgIntfKey,OCTET,read-only,,current,,RIP update authentication password.
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.1.18.1.1.13,BLADETYPE4-NETWORK-MIB::ripCurCfgIntfSplitHorizon,INTEGER,read-only,,current,enabled(2):disabled(3),RIP split horizon.
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.1.18.2,BLADETYPE4-NETWORK-MIB::ripNewCfgIntfTable,,not-accessible,,current,,The table of RIP on IP interface configuration in the new_config.
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.1.18.2.1,BLADETYPE4-NETWORK-MIB::ripNewCfgIntfEntry,,not-accessible,ripNewCfgIntfIndex,current,,Information about RIP on IP interface.
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.1.18.2.1.1,BLADETYPE4-NETWORK-MIB::ripNewCfgIntfIndex,INTEGER,read-only,,current,,The interface number for which the RIP information is related.
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.1.18.2.1.2,BLADETYPE4-NETWORK-MIB::ripNewCfgIntfVersion,INTEGER,read-write,,current,ripVersion1(1):ripVersion2(2):ripVersionBoth(3),RIP version.
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.1.18.2.1.3,BLADETYPE4-NETWORK-MIB::ripNewCfgIntfSupply,INTEGER,read-write,,current,enabled(1):disabled(2),Enable or disable supplying route updates.
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.1.18.2.1.4,BLADETYPE4-NETWORK-MIB::ripNewCfgIntfListen,INTEGER,read-write,,current,enabled(1):disabled(2),Enable or disable listening to route updates.
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.1.18.2.1.5,BLADETYPE4-NETWORK-MIB::ripNewCfgIntfDefault,INTEGER,read-create,,current,both(1):listen(2):supply(3):none(4),Specifies what RIP does with default routes. The default routes  action could be set to listen/supply/both/none.
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.1.18.2.1.6,BLADETYPE4-NETWORK-MIB::ripNewCfgIntfTrigUpdate,INTEGER,read-write,,current,enabled(1):disabled(2),Enable or disable tirggered updates.
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.1.18.2.1.7,BLADETYPE4-NETWORK-MIB::ripNewCfgIntfMcastUpdate,INTEGER,read-write,,current,enabled(1):disabled(2),Enable or disable multicast updates.
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.1.18.2.1.8,BLADETYPE4-NETWORK-MIB::ripNewCfgIntfPoisonReverse,INTEGER,read-write,,current,enabled(1):disabled(2),RIP poison reverse.
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.1.18.2.1.9,BLADETYPE4-NETWORK-MIB::ripNewCfgIntfState,INTEGER,read-create,,current,enabled(1):disabled(2),Enable or disable RIP protocol.
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.1.18.2.1.10,BLADETYPE4-NETWORK-MIB::ripNewCfgIntfMetric,INTEGER,read-write,,current,,RIP route metric for this interface.
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.1.18.2.1.11,BLADETYPE4-NETWORK-MIB::ripNewCfgIntfAuth,INTEGER,read-write,,current,none(1):password(2),Enable or disable RIP update authorization with a  simple plain text password.
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.1.18.2.1.12,BLADETYPE4-NETWORK-MIB::ripNewCfgIntfKey,OCTET,read-create,,current,,RIP update authentication password.
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.1.18.2.1.13,BLADETYPE4-NETWORK-MIB::ripNewCfgIntfSplitHorizon,INTEGER,read-write,,current,enabled(2):disabled(3),RIP split horizon.
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.1.18.3,BLADETYPE4-NETWORK-MIB::ripGeneral,,,,,,
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.1.18.3.1,BLADETYPE4-NETWORK-MIB::rip2CurCfgState,INTEGER,read-only,,current,on(1):off(2),RIP global state.
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.1.18.3.2,BLADETYPE4-NETWORK-MIB::rip2NewCfgState,INTEGER,read-write,,current,on(1):off(2),Globally turn RIP on or off.
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.1.18.3.3,BLADETYPE4-NETWORK-MIB::rip2CurCfgUpdatePeriod,INTEGER,read-only,,current,,Update Period in seconds.
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.1.18.3.4,BLADETYPE4-NETWORK-MIB::rip2NewCfgUpdatePeriod,INTEGER,read-write,,current,,Update Period in seconds.
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.1.18.4,BLADETYPE4-NETWORK-MIB::ripRouteRedistribution,,,,,,
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.1.18.4.1,BLADETYPE4-NETWORK-MIB::ripRedistributeStatic,,,,,,
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.1.18.4.1.1,BLADETYPE4-NETWORK-MIB::ripCurCfgStaticMetric,INTEGER,read-only,,current,,The metric to be assigned to static routes.  A value of 0 indicates none.
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.1.18.4.1.2,BLADETYPE4-NETWORK-MIB::ripNewCfgStaticMetric,INTEGER,read-write,,current,,The metric to be assigned to static routes.  A value of 0 indicates none.
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.1.18.4.1.5,BLADETYPE4-NETWORK-MIB::ripCurCfgStaticOutRmapList,OCTET,read-only,,current,,The route maps present in the out route map list.  The route maps are presented in a bitmap format. in receiving order: OCTET 1 OCTET 2 ..... xxxxxxxx xxxxxxxx ..... || || |_ Rmap 9 || || || ||___ Rmap 8 || |____ Rmap 7 || . . . ||_________ Rmap 2 |__________ Rmap 1 where x : 1 - The represented route map is selected 0 - The represented route map is not selected
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.1.18.4.1.6,BLADETYPE4-NETWORK-MIB::ripNewCfgStaticOutRmapList,OCTET,read-only,,current,,The route maps present in the out route map list.  The route maps are presented in a bitmap format. in receiving order: OCTET 1 OCTET 2 ..... xxxxxxxx xxxxxxxx ..... || || |_ Rmap 9 || || || ||___ Rmap 8 || |____ Rmap 7 || . . . ||_________ Rmap 2 |__________ Rmap 1 where x : 1 - The represented route map is selected 0 - The represented route map is not selected
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.1.18.4.1.7,BLADETYPE4-NETWORK-MIB::ripNewCfgStaticAddOutRmap,Integer32,read-write,,current,,The route map to be add into out-rmap list. When read, 0 is returned.
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.1.18.4.1.8,BLADETYPE4-NETWORK-MIB::ripNewCfgStaticRemoveOutRmap,Integer32,read-write,,current,,The route map to be removed from out-rmap list. When read,  0 is returned.
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.1.18.4.4,BLADETYPE4-NETWORK-MIB::ripRedistributeFixed,,,,,,
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.1.18.4.4.1,BLADETYPE4-NETWORK-MIB::ripCurCfgFixedMetric,INTEGER,read-only,,current,,The export metric for fixed routes. A value of 0 indicates none
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.1.18.4.4.2,BLADETYPE4-NETWORK-MIB::ripNewCfgFixedMetric,INTEGER,read-write,,current,,The export metric for fixed routes. A value of 0 indicates none
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.1.18.4.4.5,BLADETYPE4-NETWORK-MIB::ripCurCfgFixedOutRmapList,OCTET,read-only,,current,,The route maps present in the out route map list.  The route maps are presented in a bitmap format. in receiving order: OCTET 1 OCTET 2 ..... xxxxxxxx xxxxxxxx ..... || || |_ Rmap 9 || || || ||___ Rmap 8 || |____ Rmap 7 || . . . ||_________ Rmap 2 |__________ Rmap 1 where x : 1 - The represented route map is selected 0 - The represented route map is not selected
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.1.18.4.4.6,BLADETYPE4-NETWORK-MIB::ripNewCfgFixedOutRmapList,OCTET,read-only,,current,,The route maps present in the out route map list.  The route maps are presented in a bitmap format. in receiving order: OCTET 1 OCTET 2 ..... xxxxxxxx xxxxxxxx ..... || || |_ Rmap 9 || || || ||___ Rmap 8 || |____ Rmap 7 || . . . ||_________ Rmap 2 |__________ Rmap 1 where x : 1 - The represented route map is selected 0 - The represented route map is not selected
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.1.18.4.4.7,BLADETYPE4-NETWORK-MIB::ripNewCfgFixedAddOutRmap,Integer32,read-write,,current,,The route map to be add into out-rmap list. When read, 0 is returned.
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.1.18.4.4.8,BLADETYPE4-NETWORK-MIB::ripNewCfgFixedRemoveOutRmap,Integer32,read-write,,current,,The route map to be removed from out-rmap list. When read,  0 is returned.
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.1.18.4.5,BLADETYPE4-NETWORK-MIB::ripRedistributeOspf,,,,,,
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.1.18.4.5.1,BLADETYPE4-NETWORK-MIB::ripCurCfgOspfMetric,INTEGER,read-only,,current,,The export metric for RIP routes. A value of 0 indicates none
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.1.18.4.5.2,BLADETYPE4-NETWORK-MIB::ripNewCfgOspfMetric,INTEGER,read-write,,current,,The export metric for RIP routes. A value of 0 indicates none
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.1.18.4.5.5,BLADETYPE4-NETWORK-MIB::ripCurCfgOspfOutRmapList,OCTET,read-only,,current,,The route maps present in the out route map list.  The route maps are presented in a bitmap format. in receiving order: OCTET 1 OCTET 2 ..... xxxxxxxx xxxxxxxx ..... || || |_ Rmap 9 || || || ||___ Rmap 8 || |____ Rmap 7 || . . . ||_________ Rmap 2 |__________ Rmap 1 where x : 1 - The represented route map is selected 0 - The represented route map is not selected
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.1.18.4.5.6,BLADETYPE4-NETWORK-MIB::ripNewCfgOspfOutRmapList,OCTET,read-only,,current,,The route maps present in the out route map list.  The route maps are presented in a bitmap format. in receiving order: OCTET 1 OCTET 2 ..... xxxxxxxx xxxxxxxx ..... || || |_ Rmap 9 || || || ||___ Rmap 8 || |____ Rmap 7 || . . . ||_________ Rmap 2 |__________ Rmap 1 where x : 1 - The represented route map is selected 0 - The represented route map is not selected
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.1.18.4.5.7,BLADETYPE4-NETWORK-MIB::ripNewCfgOspfAddOutRmap,Integer32,read-write,,current,,The route map to be add into out-rmap list. When read, 0 is returned.
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.1.18.4.5.8,BLADETYPE4-NETWORK-MIB::ripNewCfgOspfRemoveOutRmap,Integer32,read-write,,current,,The route map to be removed from out-rmap list. When read,  0 is returned.
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.1.18.4.6,BLADETYPE4-NETWORK-MIB::ripRedistributeEospf,,,,,,
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.1.18.4.6.1,BLADETYPE4-NETWORK-MIB::ripCurCfgEospfMetric,INTEGER,read-only,,current,,The export metric for RIP routes. A value of 0 indicates none
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.1.18.4.6.2,BLADETYPE4-NETWORK-MIB::ripNewCfgEospfMetric,INTEGER,read-write,,current,,The export metric for RIP routes. A value of 0 indicates none
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.1.18.4.6.5,BLADETYPE4-NETWORK-MIB::ripCurCfgEospfOutRmapList,OCTET,read-only,,current,,The route maps present in the out route map list.  The route maps are presented in a bitmap format. in receiving order: OCTET 1 OCTET 2 ..... xxxxxxxx xxxxxxxx ..... || || |_ Rmap 9 || || || ||___ Rmap 8 || |____ Rmap 7 || . . . ||_________ Rmap 2 |__________ Rmap 1 where x : 1 - The represented route map is selected 0 - The represented route map is not selected
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.1.18.4.6.6,BLADETYPE4-NETWORK-MIB::ripNewCfgEospfOutRmapList,OCTET,read-only,,current,,The route maps present in the out route map list.  The route maps are presented in a bitmap format. in receiving order: OCTET 1 OCTET 2 ..... xxxxxxxx xxxxxxxx ..... || || |_ Rmap 9 || || || ||___ Rmap 8 || |____ Rmap 7 || . . . ||_________ Rmap 2 |__________ Rmap 1 where x : 1 - The represented route map is selected 0 - The represented route map is not selected
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.1.18.4.6.7,BLADETYPE4-NETWORK-MIB::ripNewCfgEospfAddOutRmap,Integer32,read-write,,current,,The route map to be add into out-rmap list. When read, 0 is returned.
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.1.18.4.6.8,BLADETYPE4-NETWORK-MIB::ripNewCfgEospfRemoveOutRmap,Integer32,read-write,,current,,The route map to be removed from out-rmap list. When read,  0 is returned.
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.2,BLADETYPE4-NETWORK-MIB::layer3Stats,,,,,,
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.2.2,BLADETYPE4-NETWORK-MIB::arpStats,,,,,,
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.2.2.1,BLADETYPE4-NETWORK-MIB::arpStatEntries,Gauge32,read-only,,current,,The current number of ARP entries.
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.2.2.2,BLADETYPE4-NETWORK-MIB::arpStatHighWater,Gauge32,read-only,,current,,The highest number of ARP entries.
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.2.2.3,BLADETYPE4-NETWORK-MIB::arpStatMaxEntries,Gauge32,read-only,,current,,The maximum number of ARP entries.
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.2.3,BLADETYPE4-NETWORK-MIB::routeStats,,,,,,
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.2.3.1,BLADETYPE4-NETWORK-MIB::routeStatEntries,Gauge32,read-only,,current,,The current number of IP routes.
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.2.3.2,BLADETYPE4-NETWORK-MIB::routeStatHighWater,Gauge32,read-only,,current,,The highest number of IP routes.
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.2.3.3,BLADETYPE4-NETWORK-MIB::routeStatMaxEntries,Gauge32,read-only,,current,,The maximum number of IP routes.
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.2.4,BLADETYPE4-NETWORK-MIB::vrrpStats,,,,,,
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.2.4.1,BLADETYPE4-NETWORK-MIB::vrrpStatInAdvers,Counter32,read-only,,current,,The number of good VRRP advertisements which are received.
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.2.4.2,BLADETYPE4-NETWORK-MIB::vrrpStatOutAdvers,Counter32,read-only,,current,,The number of good VRRP advertisements which are transmitted.
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.2.4.3,BLADETYPE4-NETWORK-MIB::vrrpStatOutBadAdvers,Counter32,read-only,,current,,The number of bad VRRP advertisements which are received.
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.2.4.4,BLADETYPE4-NETWORK-MIB::vrrpStatBadVersion,Counter32,read-only,,current,,The number of bad VRRP version adv which are received.
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.2.4.5,BLADETYPE4-NETWORK-MIB::vrrpStatBadAddress,Counter32,read-only,,current,,The number of bad VRRP addres adv which are received.
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.2.4.6,BLADETYPE4-NETWORK-MIB::vrrpStatBadPassword,Counter32,read-only,,current,,The number of bad VRRP advertisements which are received.
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.2.4.7,BLADETYPE4-NETWORK-MIB::vrrpStatBadVrid,Counter32,read-only,,current,,The number of bad VRRP version ID adv which are received.
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.2.4.8,BLADETYPE4-NETWORK-MIB::vrrpStatBadData,Counter32,read-only,,current,,The number of bad VRRP advertisements which are received.
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.2.4.9,BLADETYPE4-NETWORK-MIB::vrrpStatBadInterval,Counter32,read-only,,current,,The number of bad VRRP iutervals which are received.
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.2.5,BLADETYPE4-NETWORK-MIB::ospfStats,,,,,,
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.2.5.1,BLADETYPE4-NETWORK-MIB::ospfGeneralStats,,,,,,
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.2.5.1.1,BLADETYPE4-NETWORK-MIB::ospfCumRxTxStats,,,,,,
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.2.5.1.1.1,BLADETYPE4-NETWORK-MIB::ospfCumRxPkts,Counter32,read-only,,current,,The sum total of all OSPF packets received on all OSPF areas and interfaces.
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.2.5.1.1.2,BLADETYPE4-NETWORK-MIB::ospfCumTxPkts,Counter32,read-only,,current,,The sum total of all OSPF packets transmitted on all OSPF areas and interfaces.
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.2.5.1.1.3,BLADETYPE4-NETWORK-MIB::ospfCumRxHello,Counter32,read-only,,current,,The sum total of all Hello packets received on all OSPF areas and interfaces.
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.2.5.1.1.4,BLADETYPE4-NETWORK-MIB::ospfCumTxHello,Counter32,read-only,,current,,The sum total of all Hello packets transmitted on all OSPF areas and interfaces.
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.2.5.1.1.5,BLADETYPE4-NETWORK-MIB::ospfCumRxDatabase,Counter32,read-only,,current,,The sum total of all Database Description packets received on all OSPF areas and interfaces.
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.2.5.1.1.6,BLADETYPE4-NETWORK-MIB::ospfCumTxDatabase,Counter32,read-only,,current,,The sum total of all Database Description packets transmitted on all OSPF areas and interfaces.
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.2.5.1.1.7,BLADETYPE4-NETWORK-MIB::ospfCumRxlsReqs,Counter32,read-only,,current,,The sum total of all Link State Request packets received on all OSPF areas and interfaces.
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.2.5.1.1.8,BLADETYPE4-NETWORK-MIB::ospfCumTxlsReqs,Counter32,read-only,,current,,The sum total of all Link State Request packets transmitted on all OSPF areas and interfaces.
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.2.5.1.1.9,BLADETYPE4-NETWORK-MIB::ospfCumRxlsAcks,Counter32,read-only,,current,,The sum total of all Link State Acknowledgement packets received on all OSPF areas and interfaces.
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.2.5.1.1.10,BLADETYPE4-NETWORK-MIB::ospfCumTxlsAcks,Counter32,read-only,,current,,The sum total of all Link State Acknowledgement packets transmitted on all OSPF areas and interfaces.
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.2.5.1.1.11,BLADETYPE4-NETWORK-MIB::ospfCumRxlsUpdates,Counter32,read-only,,current,,The sum total of all Link State Update packets received on all OSPF areas and interfaces.
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.2.5.1.1.12,BLADETYPE4-NETWORK-MIB::ospfCumTxlsUpdates,Counter32,read-only,,current,,The sum total of all Link State Update packets transmitted on all OSPF areas and interfaces.
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.2.5.1.2,BLADETYPE4-NETWORK-MIB::ospfCumNbrChangeStats,,,,,,
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.2.5.1.2.1,BLADETYPE4-NETWORK-MIB::ospfCumNbrhello,Counter32,read-only,,current,,The sum total of all Hello packets received from neighbours on all OSPF areas and interfaces.
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.2.5.1.2.2,BLADETYPE4-NETWORK-MIB::ospfCumNbrStart,Counter32,read-only,,current,,The sum total number of neighbours in this state (i.e. an indication that Hello packets should now be sent to the neighbour at intervals of HelloInterval seconds.) across all OSPF areas and interfaces.
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.2.5.1.2.3,BLADETYPE4-NETWORK-MIB::ospfCumNbrAdjointOk,Counter32,read-only,,current,,The sum total number of decisions to be made (again) as to whether an adjacency should be established/maintained with the neighbour across all OSPF areas and interfaces.
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.2.5.1.2.4,BLADETYPE4-NETWORK-MIB::ospfCumNbrNegotiationDone,Counter32,read-only,,current,,The sum total number of neighbours in this state wherein the  Master/slave relationship has been negotiated, and sequence numbers have been exchanged, across all OSPF areas and  interfaces.
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.2.5.1.2.5,BLADETYPE4-NETWORK-MIB::ospfCumNbrExchangeDone,Counter32,read-only,,current,,The sum total number of neighbours in this state (i.e. in an adjacency's final state) having transimitted a full sequence  of Database Description packets, across all OSPF areas and interfaces.
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.2.5.1.2.6,BLADETYPE4-NETWORK-MIB::ospfCumNbrBadRequests,Counter32,read-only,,current,,The sum total number of Link State Requests which have been received for a link state advertisement not contained in the database across all interfaces and OSPF areas.
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.2.5.1.2.7,BLADETYPE4-NETWORK-MIB::ospfCumNbrBadSequence,Counter32,read-only,,current,,The sum total number of Database Description packets which have been received that either  a) has an unexpected DD sequence number b) Unexpectedly has the init bit set c) Has an options field differing from the last Options field received in a Database Description packet. Any of these conditions indicate that some error has occured during adjacency establishment for all OSPF areas and interfaces.
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.2.5.1.2.8,BLADETYPE4-NETWORK-MIB::ospfCumNbrLoadingDone,Counter32,read-only,,current,,The sum total number of link state updates received for all  out-of-date portions of the database across all OSPF areas and interfaces.
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.2.5.1.2.9,BLADETYPE4-NETWORK-MIB::ospfCumNbrN1way,Counter32,read-only,,current,,The sum total number of Hello packets received from neighbours, in which this router is not mentioned across all OSPF interfaces and areas.
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.2.5.1.2.10,BLADETYPE4-NETWORK-MIB::ospfCumNbrRstAd,Counter32,read-only,,current,,The sum total number of times the Neighbour adjacency has been reset across all OPSF areas and interfaces.
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.2.5.1.2.11,BLADETYPE4-NETWORK-MIB::ospfCumNbrDown,Counter32,read-only,,current,,The total number of Neighbouring routers down (i.e. in the initial state of a neighbour conversation.) across all OSPF areas and  interfaces.
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.2.5.1.2.12,BLADETYPE4-NETWORK-MIB::ospfCumNbrN2way,Counter32,read-only,,current,,The sum total number of Hello packets received from neighbours, in which this router is mentioned across all OSPF interfaces and areas.
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.2.5.1.3,BLADETYPE4-NETWORK-MIB::ospfCumIntfChangeStats,,,,,,
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.2.5.1.3.1,BLADETYPE4-NETWORK-MIB::ospfCumIntfHello,Counter32,read-only,,current,,The sum total number of Hello packets sent on all interfaces  and areas
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.2.5.1.3.2,BLADETYPE4-NETWORK-MIB::ospfCumIntfDown,Counter32,read-only,,current,,The sum total number of interfaces down in all OSPF areas.
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.2.5.1.3.3,BLADETYPE4-NETWORK-MIB::ospfCumIntfLoop,Counter32,read-only,,current,,The sum total of interfaces no longer connected to  the attatched network across all OSPF areas and interfaces.
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.2.5.1.3.4,BLADETYPE4-NETWORK-MIB::ospfCumIntfUnloop,Counter32,read-only,,current,,The sum total number of interfaces, connected to the attatched network in all OSPF areas.
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.2.5.1.3.5,BLADETYPE4-NETWORK-MIB::ospfCumIntfWaitTimer,Counter32,read-only,,current,,The sum total number of times the Wait Timer has been fired, (indicating the end of the waiting period that is required before electing a (Backup) Designated Router) across all  OSPF areas and interfaces.
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.2.5.1.3.6,BLADETYPE4-NETWORK-MIB::ospfCumIntfBackup,Counter32,read-only,,current,,The sum total number of Backup Designated Routers on the attatched network for all OSPF areas and interfaces.
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.2.5.1.3.7,BLADETYPE4-NETWORK-MIB::ospfCumIntfNbrChange,Counter32,read-only,,current,,The sum total number of changes in the set of bidirectional neighbours associated with any interface across all OSPF areas.
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.2.5.1.4,BLADETYPE4-NETWORK-MIB::ospfTimersKickOffStats,,,,,,
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.2.5.1.4.1,BLADETYPE4-NETWORK-MIB::ospfTmrsKckOffHello,Counter32,read-only,,current,,The sum total number of times the Hello timer has been fired (which triggers the send of a Hello packet) across all OPSF  areas and interfaces.
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.2.5.1.4.2,BLADETYPE4-NETWORK-MIB::ospfTmrsKckOffRetransmit,Counter32,read-only,,current,,The sum total number of times the Retransmit timer has been fired across all OPSF areas and interfaces.
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.2.5.1.4.3,BLADETYPE4-NETWORK-MIB::ospfTmrsKckOffLsaLock,Counter32,read-only,,current,,The sum total number of times the Lsa Lock timer has been  fired across all OSPF areas and interfaces.
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.2.5.1.4.4,BLADETYPE4-NETWORK-MIB::ospfTmrsKckOffLsaAck,Counter32,read-only,,current,,The sum total number of times the Lsa Ack timer has been  fired across all ospf areas and interfaces.
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.2.5.1.4.5,BLADETYPE4-NETWORK-MIB::ospfTmrsKckOffDbage,Counter32,read-only,,current,,The total number of times the Dbage has been fired.
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.2.5.1.4.6,BLADETYPE4-NETWORK-MIB::ospfTmrsKckOffSummary,Counter32,read-only,,current,,The total number of times the Summary timer has been fired.
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.2.5.1.4.7,BLADETYPE4-NETWORK-MIB::ospfTmrsKckOffAseExport,Counter32,read-only,,current,,The total number of times the ASE Export timer has been fired.
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.2.5.2,BLADETYPE4-NETWORK-MIB::ospfArea,,,,,,
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.2.5.2.1,BLADETYPE4-NETWORK-MIB::ospfAreaRxTxStats,,not-accessible,,current,,The table of OSPF Area Rx/Tx Statistics.
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.2.5.2.1.1,BLADETYPE4-NETWORK-MIB::ospfAreaRxTxStatsEntry,,not-accessible,ospfAreaRxTxIndex,current,,Rx Tx packet Statistics about a OSPF area.
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.2.5.2.1.1.1,BLADETYPE4-NETWORK-MIB::ospfAreaRxTxIndex,Integer32,read-only,,current,,The index of the ospf Area for which these statistics apply.
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.2.5.2.1.1.2,BLADETYPE4-NETWORK-MIB::ospfAreaRxPkts,Counter32,read-only,,current,,The total number of OSPF packets received in this OSPF area.
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.2.5.2.1.1.3,BLADETYPE4-NETWORK-MIB::ospfAreaTxPkts,Counter32,read-only,,current,,The total number of OSPF packets transmitted in this OSPF area.
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.2.5.2.1.1.4,BLADETYPE4-NETWORK-MIB::ospfAreaRxHello,Counter32,read-only,,current,,The total number of Hello packets received in this OSPF area.
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.2.5.2.1.1.5,BLADETYPE4-NETWORK-MIB::ospfAreaTxHello,Counter32,read-only,,current,,The total number of Hello packets transmitted in this OSPF area.
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.2.5.2.1.1.6,BLADETYPE4-NETWORK-MIB::ospfAreaRxDatabase,Counter32,read-only,,current,,The total number of Database Description packets transmitted  for this OSPF area.
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.2.5.2.1.1.7,BLADETYPE4-NETWORK-MIB::ospfAreaTxDatabase,Counter32,read-only,,current,,The total number of Database Description packets transmitted  for this OSPF area.
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.2.5.2.1.1.8,BLADETYPE4-NETWORK-MIB::ospfAreaRxlsReqs,Counter32,read-only,,current,,The total number of Link State Request packets received for  this OSPF area.
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.2.5.2.1.1.9,BLADETYPE4-NETWORK-MIB::ospfAreaTxlsReqs,Counter32,read-only,,current,,The total number of Link State Request packets transmitted for  this OSPF area.
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.2.5.2.1.1.10,BLADETYPE4-NETWORK-MIB::ospfAreaRxlsAcks,Counter32,read-only,,current,,The total number of Link State Acknowledgement packets received for  this OSPF area.
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.2.5.2.1.1.11,BLADETYPE4-NETWORK-MIB::ospfAreaTxlsAcks,Counter32,read-only,,current,,The total number of Link State Acknowledgement packets transmitted for this OSPF area.
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.2.5.2.1.1.12,BLADETYPE4-NETWORK-MIB::ospfAreaRxlsUpdates,Counter32,read-only,,current,,The total number of Link State Update packets received for  this OSPF area.
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.2.5.2.1.1.13,BLADETYPE4-NETWORK-MIB::ospfAreaTxlsUpdates,Counter32,read-only,,current,,The total number of Link State Update packets transmitted for  this OSPF area.
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.2.5.2.2,BLADETYPE4-NETWORK-MIB::ospfAreaNbrChangeStats,,not-accessible,,current,,The table of OSPF Area Neighbour Statistics.
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.2.5.2.2.1,BLADETYPE4-NETWORK-MIB::ospfAreaNbrChangeStatsEntry,,not-accessible,ospfAreaNbrIndex,current,,Area Neighbour Change Statistics about a OSPF area.
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.2.5.2.2.1.1,BLADETYPE4-NETWORK-MIB::ospfAreaNbrIndex,Integer32,read-only,,current,,The index of the ospf Area for which these statistics apply.
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.2.5.2.2.1.2,BLADETYPE4-NETWORK-MIB::ospfAreaNbrhello,Counter32,read-only,,current,,The total number of Hello packets received from neighbours in this OSPF area.
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.2.5.2.2.1.3,BLADETYPE4-NETWORK-MIB::ospfAreaNbrStart,Counter32,read-only,,current,,The total number of neighbours in this state (i.e. an indication that Hello packets should now be sent to the neighbour at intervals of HelloInterval seconds.) in this OSPF area.
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.2.5.2.2.1.4,BLADETYPE4-NETWORK-MIB::ospfAreaNbrAdjointOk,Counter32,read-only,,current,,The total number of decisions to be made (again) as to whether an adjacency should be established/maintained with the neighbour. for this OSPF area.
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.2.5.2.2.1.5,BLADETYPE4-NETWORK-MIB::ospfAreaNbrNegotiationDone,Counter32,read-only,,current,,The total number of neighbours in this state wherein the  Master/slave relationship has been negotiated, and sequence numbers have been exchanged, for this OSPF area.
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.2.5.2.2.1.6,BLADETYPE4-NETWORK-MIB::ospfAreaNbrExchangeDone,Counter32,read-only,,current,,The total number of neighbours in this state (i.e. in an adjacency's final state) having transimitted a full sequence  of Database Description packets, for this OSPF area.
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.2.5.2.2.1.7,BLADETYPE4-NETWORK-MIB::ospfAreaNbrBadRequests,Counter32,read-only,,current,,The sum total number of Link State Requests which have been received for a link state advertisement not contained in the database across this OSPF area.
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.2.5.2.2.1.8,BLADETYPE4-NETWORK-MIB::ospfAreaNbrBadSequence,Counter32,read-only,,current,,The total number of Database Description packets which have been received that either  a) has an unexpected DD sequence number b) Unexpectedly has the init bit set c) Has an options field differing from the last Options field received in a Database Description packet. Any of these conditions indicate that some error has occured during adjacency establishment for this OSPF area.
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.2.5.2.2.1.9,BLADETYPE4-NETWORK-MIB::ospfAreaNbrLoadingDone,Counter32,read-only,,current,,The total number of link state updates received for all  out-of-date portions of the database in this OSPF area.
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.2.5.2.2.1.10,BLADETYPE4-NETWORK-MIB::ospfAreaNbrN1way,Counter32,read-only,,current,,The total number of Hello packets received from neighbours, in which this router is not mentioned in this OSPF area.
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.2.5.2.2.1.11,BLADETYPE4-NETWORK-MIB::ospfAreaNbrRstAd,Counter32,read-only,,current,,The total number of times the Neighbour adjacency has been reset across this OPSF area.
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.2.5.2.2.1.12,BLADETYPE4-NETWORK-MIB::ospfAreaNbrDown,Counter32,read-only,,current,,The total number of Neighbouring routers down (i.e. in the initial state of a neighbour conversation.) in this OSPF area.
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.2.5.2.2.1.13,BLADETYPE4-NETWORK-MIB::ospfAreaNbrN2way,Counter32,read-only,,current,,The total number of Hello packets received from neighbours, in which this router is mentioned in this OSPF area.
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.2.5.2.3,BLADETYPE4-NETWORK-MIB::ospfAreaChangeStats,,not-accessible,,current,,The table of OSPF Area Change Statistics.
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.2.5.2.3.1,BLADETYPE4-NETWORK-MIB::ospfAreaChangeStatsEntry,,not-accessible,ospfAreaIntfIndex,current,,Area Change Statistics about a OSPF area.
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.2.5.2.3.1.1,BLADETYPE4-NETWORK-MIB::ospfAreaIntfIndex,Integer32,read-only,,current,,The index of the OSPF Area for which these statistics apply.
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.2.5.2.3.1.2,BLADETYPE4-NETWORK-MIB::ospfAreaIntfHello,Counter32,read-only,,current,,The total number of Hello packets sent on this OSPF area.
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.2.5.2.3.1.3,BLADETYPE4-NETWORK-MIB::ospfAreaIntfDown,Counter32,read-only,,current,,The total number of interfaces down in this OSPF area.
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.2.5.2.3.1.4,BLADETYPE4-NETWORK-MIB::ospfAreaIntfLoop,Counter32,read-only,,current,,The total number of interfaces no longer connected to  the attatched network in this OSPF area.
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.2.5.2.3.1.5,BLADETYPE4-NETWORK-MIB::ospfAreaIntfUnloop,Counter32,read-only,,current,,The total number of interfaces connected to the attatched
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.2.5.2.3.1.6,BLADETYPE4-NETWORK-MIB::ospfAreaIntfWaitTimer,Counter32,read-only,,current,,The total number of times the Wait Timer has been fired, (indicating the end of the waiting period that is required before electing a (Backup) Designated Router) for this  OSPF area.
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.2.5.2.3.1.7,BLADETYPE4-NETWORK-MIB::ospfAreaIntfBackup,Counter32,read-only,,current,,The total number of Backup Designated Routers on the attatched network for this OSPF area.
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.2.5.2.3.1.8,BLADETYPE4-NETWORK-MIB::ospfAreaIntfNbrChange,Counter32,read-only,,current,,The total number of changes in the set of bidirectional neighbours associated with the interface in this OSPF area.
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.2.5.2.4,BLADETYPE4-NETWORK-MIB::ospfAreaErrorStats,,not-accessible,,current,,The table of OSPF Area Error Statistics.
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.2.5.2.4.1,BLADETYPE4-NETWORK-MIB::ospfAreaErrorStatsEntry,,not-accessible,ospfAreaErrIndex,current,,Error Statistics for an OSPF area.
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.2.5.2.4.1.1,BLADETYPE4-NETWORK-MIB::ospfAreaErrIndex,Integer32,read-only,,current,,The index of the OSPF Area for which these statistics apply.
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.2.5.2.4.1.2,BLADETYPE4-NETWORK-MIB::ospfAreaErrAuthFailure,Counter32,read-only,,current,,The total number of packets received with a wrong password in  this area.
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.2.5.2.4.1.3,BLADETYPE4-NETWORK-MIB::ospfAreaErrNetmaskMismatch,Counter32,read-only,,current,,The total number of packets received with a wrong netmask in  this area.
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.2.5.2.4.1.4,BLADETYPE4-NETWORK-MIB::ospfAreaErrHelloMismatch,Counter32,read-only,,current,,The total number of packets received with a different hello interval in this area.
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.2.5.2.4.1.5,BLADETYPE4-NETWORK-MIB::ospfAreaErrDeadMismatch,Counter32,read-only,,current,,The total number of packets received with a different dead interval in this area.
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.2.5.2.4.1.6,BLADETYPE4-NETWORK-MIB::ospfAreaErrOptionsMismatch,Counter32,read-only,,current,,The total number of packets received with a different options in this area.
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.2.5.2.4.1.7,BLADETYPE4-NETWORK-MIB::ospfAreaErrUnknownNbr,Counter32,read-only,,current,,The total number of packets received from an unknown neighbor in this area.
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.2.5.2.4.1.8,BLADETYPE4-NETWORK-MIB::ospfAreaErrAreaMismatch,Counter32,read-only,,current,,The total number of packets received with a wrong area.
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.2.5.3,BLADETYPE4-NETWORK-MIB::ospfInterface,,,,,,
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.2.5.3.1,BLADETYPE4-NETWORK-MIB::ospfIntfRxTxStats,,not-accessible,,current,,The table of OSPF Interface Rx/Tx packet Statistics.
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.2.5.3.1.1,BLADETYPE4-NETWORK-MIB::ospfIntfRxTxStatsEntry,,not-accessible,ospfIntfRxTxIndex,current,,OSPF interface Rx/Tx packet statistics.
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.2.5.3.1.1.1,BLADETYPE4-NETWORK-MIB::ospfIntfRxTxIndex,Integer32,read-only,,current,,The OSPF interface for which these statistics apply.
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.2.5.3.1.1.2,BLADETYPE4-NETWORK-MIB::ospfIntfRxPkts,Counter32,read-only,,current,,The total number of OSPF packets received for this OSPF interface.
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.2.5.3.1.1.3,BLADETYPE4-NETWORK-MIB::ospfIntfTxPkts,Counter32,read-only,,current,,The total number of OSPF packets transmitted for this OSPF interface.
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.2.5.3.1.1.4,BLADETYPE4-NETWORK-MIB::ospfIntfRxHello,Counter32,read-only,,current,,The total number of Hello packets received  for this OSPF interface.
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.2.5.3.1.1.5,BLADETYPE4-NETWORK-MIB::ospfIntfTxHello,Counter32,read-only,,current,,The total number of Hello packets transmitted  for this OSPF interface.
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.2.5.3.1.1.6,BLADETYPE4-NETWORK-MIB::ospfIntfRxDatabase,Counter32,read-only,,current,,The total number of Database Description packets received  for this OSPF interface.
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.2.5.3.1.1.7,BLADETYPE4-NETWORK-MIB::ospfIntfTxDatabase,Counter32,read-only,,current,,The total number of Database Description packets transmitted  for this OSPF interface.
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.2.5.3.1.1.8,BLADETYPE4-NETWORK-MIB::ospfIntfRxlsReqs,Counter32,read-only,,current,,The total number of Link State Request packets received for this OSPF interface.
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.2.5.3.1.1.9,BLADETYPE4-NETWORK-MIB::ospfIntfTxlsReqs,Counter32,read-only,,current,,The total number of Link State Request packets transmitted for this OSPF interface.
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.2.5.3.1.1.10,BLADETYPE4-NETWORK-MIB::ospfIntfRxlsAcks,Counter32,read-only,,current,,The total number of Link State Acknowledgement packets received for this OSPF interface.
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.2.5.3.1.1.11,BLADETYPE4-NETWORK-MIB::ospfIntfTxlsAcks,Counter32,read-only,,current,,The total number of Link State Acknowledgement packets transmitted for this OSPF interface.
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.2.5.3.1.1.12,BLADETYPE4-NETWORK-MIB::ospfIntfRxlsUpdates,Counter32,read-only,,current,,The total number of Link State Update packets received for  this OSPF interface.
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.2.5.3.1.1.13,BLADETYPE4-NETWORK-MIB::ospfIntfTxlsUpdates,Counter32,read-only,,current,,The total number of Link State Update packets transmitted for  this OSPF interface.
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.2.5.3.2,BLADETYPE4-NETWORK-MIB::ospfIntfNbrChangeStats,,not-accessible,,current,,The table of OSPF Interface Neighbour change Statistics.
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.2.5.3.2.1,BLADETYPE4-NETWORK-MIB::ospfIntfNbrChangeStatsEntry,,not-accessible,ospfIntfNbrIndex,current,,OSPF interface Neighbour Change statistics.
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.2.5.3.2.1.1,BLADETYPE4-NETWORK-MIB::ospfIntfNbrIndex,Integer32,read-only,,current,,The index of the OSPF Interface for which these statistics apply.
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.2.5.3.2.1.2,BLADETYPE4-NETWORK-MIB::ospfIntfNbrhello,Counter32,read-only,,current,,The total number of Hello packets received from neighbours in this OSPF interface.
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.2.5.3.2.1.3,BLADETYPE4-NETWORK-MIB::ospfIntfNbrStart,Counter32,read-only,,current,,The total number of neighbours in this state (i.e. an indication that Hello packets should now be sent to the neighbour at intervals of HelloInterval seconds.) in this OSPF interface.
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.2.5.3.2.1.4,BLADETYPE4-NETWORK-MIB::ospfIntfNbrAdjointOk,Counter32,read-only,,current,,The total number of decisions to be made (again) as to whether an adjacency should be established/maintained with the neighbour. for this OSPF interface.
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.2.5.3.2.1.5,BLADETYPE4-NETWORK-MIB::ospfIntfNbrNegotiationDone,Counter32,read-only,,current,,The total number of neighbours in this state wherein the  Master/slave relationship has been negotiated, and sequence numbers have been exchanged, for this OSPF interface.
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.2.5.3.2.1.6,BLADETYPE4-NETWORK-MIB::ospfIntfNbrExchangeDone,Counter32,read-only,,current,,The total number of neighbours in this state (i.e. in an adjacency's final state) having transimitted a full sequence  of Database Description packets, for this OSPF interface.
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.2.5.3.2.1.7,BLADETYPE4-NETWORK-MIB::ospfIntfNbrBadRequests,Counter32,read-only,,current,,The total number of Link State Requests which have been received for a link state advertisement not contained in the database for this interface.
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.2.5.3.2.1.8,BLADETYPE4-NETWORK-MIB::ospfIntfNbrBadSequence,Counter32,read-only,,current,,The total number of Database Description packets which have been received that either  a) has an unexpected DD sequence number b) Unexpectedly has the init bit set c) Has an options field differing from the last Options field received in a Database Description packet. Any of these conditions indicate that some error has occured during adjacency establishment for this interface.
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.2.5.3.2.1.9,BLADETYPE4-NETWORK-MIB::ospfIntfNbrLoadingDone,Counter32,read-only,,current,,The total number of link state updates received for all  out-of-date portions of the database for this OSPF interface.
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.2.5.3.2.1.10,BLADETYPE4-NETWORK-MIB::ospfIntfNbrN1way,Counter32,read-only,,current,,The total number of Hello packets received from neighbours, in which this router is not mentioned for this OSPF interface.
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.2.5.3.2.1.11,BLADETYPE4-NETWORK-MIB::ospfIntfNbrRstAd,Counter32,read-only,,current,,The sum total number of times the Neighbour adjacency has been reset on this interface.
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.2.5.3.2.1.12,BLADETYPE4-NETWORK-MIB::ospfIntfNbrDown,Counter32,read-only,,current,,The total number of Neighbouring routers down (i.e. in the initial state of a neighbour conversation.) for this interface.
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.2.5.3.2.1.13,BLADETYPE4-NETWORK-MIB::ospfIntfNbrN2way,Counter32,read-only,,current,,The total number of Hello packets received from neighbours, in which this router is mentioned for this OSPF interface.
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.2.5.3.3,BLADETYPE4-NETWORK-MIB::ospfIntfChangeStats,,not-accessible,,current,,The table of OSPF Interface change Statistics.
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.2.5.3.3.1,BLADETYPE4-NETWORK-MIB::ospfIntfChangeStatsEntry,,not-accessible,ospfIntfIndex,current,,OSPF interface Change statistics.
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.2.5.3.3.1.1,BLADETYPE4-NETWORK-MIB::ospfIntfIndex,Integer32,read-only,,current,,The index of the OSPF Interface for which these statistics apply.
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.2.5.3.3.1.2,BLADETYPE4-NETWORK-MIB::ospfIntfHello,Counter32,read-only,,current,,The total number of Hello packets sent by this interface.
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.2.5.3.3.1.3,BLADETYPE4-NETWORK-MIB::ospfIntfDown,Counter32,read-only,,current,,The total number of times the interface was down.
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.2.5.3.3.1.4,BLADETYPE4-NETWORK-MIB::ospfIntfLoop,Counter32,read-only,,current,,The total number of times the interface was no longer connected to  the attatched network.
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.2.5.3.3.1.5,BLADETYPE4-NETWORK-MIB::ospfIntfUnloop,Counter32,read-only,,current,,The total number of times the interface, connected back to the attatched network.
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.2.5.3.3.1.6,BLADETYPE4-NETWORK-MIB::ospfIntfWaitTimer,Counter32,read-only,,current,,The total number of times the Wait Timer has been fired, (indicating the end of the waiting period that is required before electing a (Backup) Designated Router) for this  OSPF interface.
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.2.5.3.3.1.7,BLADETYPE4-NETWORK-MIB::ospfIntfBackup,Counter32,read-only,,current,,The total number of Backup Designated Routers on the attatched network for this OSPF interface.
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.2.5.3.3.1.8,BLADETYPE4-NETWORK-MIB::ospfIntfNbrChange,Counter32,read-only,,current,,The total number of changes in the set of bidirectional neighbours associated with the interface for this OSPF interface.
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.2.5.3.4,BLADETYPE4-NETWORK-MIB::ospfIntfErrorStats,,not-accessible,,current,,The table of OSPF Interface Error Statistics.
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.2.5.3.4.1,BLADETYPE4-NETWORK-MIB::ospfIntfErrorStatsEntry,,not-accessible,ospfIntfErrIndex,current,,Error Statistics for an OSPF area.
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.2.5.3.4.1.1,BLADETYPE4-NETWORK-MIB::ospfIntfErrIndex,Integer32,read-only,,current,,The index of the OSPF Intf for which these statistics apply.
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.2.5.3.4.1.2,BLADETYPE4-NETWORK-MIB::ospfIntfErrAuthFailure,Counter32,read-only,,current,,The total number of packets received with a wrong password in  this area.
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.2.5.3.4.1.3,BLADETYPE4-NETWORK-MIB::ospfIntfErrNetmaskMismatch,Counter32,read-only,,current,,The total number of packets received with a wrong netmask in  this area.
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.2.5.3.4.1.4,BLADETYPE4-NETWORK-MIB::ospfIntfErrHelloMismatch,Counter32,read-only,,current,,The total number of packets received with a different hello interval in this area.
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.2.5.3.4.1.5,BLADETYPE4-NETWORK-MIB::ospfIntfErrDeadMismatch,Counter32,read-only,,current,,The total number of packets received with a different dead interval in this area.
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.2.5.3.4.1.6,BLADETYPE4-NETWORK-MIB::ospfIntfErrOptionsMismatch,Counter32,read-only,,current,,The total number of packets received with a different options in this area.
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.2.5.3.4.1.7,BLADETYPE4-NETWORK-MIB::ospfIntfErrUnknownNbr,Counter32,read-only,,current,,The total number of packets received from an unknown neighbor in this area.
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.2.5.3.4.1.8,BLADETYPE4-NETWORK-MIB::ospfIntfErrAreaMismatch,Counter32,read-only,,current,,The total number of packets received with a wrong area.
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.2.6,BLADETYPE4-NETWORK-MIB::clearStats,,,,,,
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.2.6.1,BLADETYPE4-NETWORK-MIB::ipClearStats,INTEGER,read-write,,current,clear(1):ok(2),Setting this to clear(1) results in clearing the IP statistics.
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.2.6.2,BLADETYPE4-NETWORK-MIB::vrrpClearStats,INTEGER,read-write,,current,ok(1):clear(2),Setting this to clear(2) results in clearing the VRRP statistics.
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.2.6.4,BLADETYPE4-NETWORK-MIB::ripClearStats,INTEGER,read-write,,current,clear(1):ok(2),Setting this to clear(1) results in clearing the RIP statistics.
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.2.6.5,BLADETYPE4-NETWORK-MIB::ospfClearStats,INTEGER,read-write,,current,clear(1):ok(2),Setting this to clear(1) results in clearing the OSPF statistics.
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.2.6.6,BLADETYPE4-NETWORK-MIB::tcpClearStats,INTEGER,read-write,,current,clear(1):ok(2),Setting this to clear(1) results in clearing the TCP statistics.
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.2.6.7,BLADETYPE4-NETWORK-MIB::udpClearStats,INTEGER,read-write,,current,clear(1):ok(2),Setting this to clear(1) results in clearing the UDP statistics.
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.2.6.8,BLADETYPE4-NETWORK-MIB::dnsClearStats,INTEGER,read-write,,current,clear(1):ok(2),Setting this to clear(1) results in clearing the DNS statistics.
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.2.6.9,BLADETYPE4-NETWORK-MIB::arpClearStats,INTEGER,read-write,,current,clear(1):ok(2),Setting this to clear(1) results in clearing the ARP statistics.
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.2.6.10,BLADETYPE4-NETWORK-MIB::icmpClearStats,INTEGER,read-write,,current,clear(1):ok(2),Setting this to clear(1) results in clearing the ICMP statistics.
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.2.6.11,BLADETYPE4-NETWORK-MIB::routeClearStats,INTEGER,read-write,,current,clear(1):ok(2),Setting this to clear(1) results in clearing the Route statistics.
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.2.7,BLADETYPE4-NETWORK-MIB::igmpStats,,,,,,
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.2.7.1,BLADETYPE4-NETWORK-MIB::igmpSnoopStats,,not-accessible,,current,,Statistics for IGMP Snooping.
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.2.7.1.1,BLADETYPE4-NETWORK-MIB::igmpSnoopStatsEntry,,not-accessible,igmpSnoopVlanIndex,current,,Statistics for IGMP Snooping.
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.2.7.1.1.1,BLADETYPE4-NETWORK-MIB::igmpSnoopVlanIndex,Integer32,read-only,,current,,The index of the VLAN for which these statistics apply.
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.2.7.1.1.2,BLADETYPE4-NETWORK-MIB::rxIgmpValidPkts,Counter32,read-only,,current,,The total number of valid IGMP packets received  on this VLAN.
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.2.7.1.1.3,BLADETYPE4-NETWORK-MIB::rxIgmpInvalidPkts,Counter32,read-only,,current,,The total number of invalid IGMP packets received  on this VLAN.
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.2.7.1.1.4,BLADETYPE4-NETWORK-MIB::rxIgmpGenQueries,Counter32,read-only,,current,,The total number of IGMP General Query packets received on this VLAN.
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.2.7.1.1.5,BLADETYPE4-NETWORK-MIB::rxIgmpGrpSpecificQueries,Counter32,read-only,,current,,The total number of IGMP Group Specific Query packets received on this VLAN.
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.2.7.1.1.6,BLADETYPE4-NETWORK-MIB::rxIgmpLeaves,Counter32,read-only,,current,,The total number of IGMP Leave packets received on this VLAN.
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.2.7.1.1.7,BLADETYPE4-NETWORK-MIB::rxIgmpReports,Counter32,read-only,,current,,The total number of IGMP Report packets received on this VLAN.
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.2.7.1.1.8,BLADETYPE4-NETWORK-MIB::txIgmpGrpSpecificQueries,Counter32,read-only,,current,,The total number of IGMP Group Specific Query packets transmitted on this VLAN.
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.2.7.1.1.9,BLADETYPE4-NETWORK-MIB::txIgmpReports,Counter32,read-only,,current,,The total number of IGMP Report packets transmitted on this VLAN.
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.2.7.1.1.10,BLADETYPE4-NETWORK-MIB::txIgmpLeaves,Counter32,read-only,,current,,The total number of IGMP Leave packets transmitted on this VLAN.
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.2.7.1.1.11,BLADETYPE4-NETWORK-MIB::igmpClearVlanStats,INTEGER,read-write,,current,clear(1):ok(2),Setting this to clear(1) results in clearing the statistics for this snooping VLAN.
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.2.7.2,BLADETYPE4-NETWORK-MIB::igmpClearAllStats,INTEGER,read-write,,current,clear(1):ok(2),Setting this to clear(1) results in clearing the IGMP statistics.
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.2.8,BLADETYPE4-NETWORK-MIB::ipStats,,,,,,
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.2.8.1,BLADETYPE4-NETWORK-MIB::ipStatsInReceives,Counter32,read-only,,current,,ip InReceive
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.2.8.2,BLADETYPE4-NETWORK-MIB::ipStatsInHdrErrors,Counter32,read-only,,current,,ip InHdrError
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.2.8.3,BLADETYPE4-NETWORK-MIB::ipStatsInAddrErrors,Counter32,read-only,,current,,ip InAddrErrors
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.2.8.4,BLADETYPE4-NETWORK-MIB::ipStatsInUnknownProtos,Counter32,read-only,,current,,ip InUnknownProtos
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.2.8.5,BLADETYPE4-NETWORK-MIB::ipStatsInDiscards,Counter32,read-only,,current,,ip InDiscards
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.2.8.6,BLADETYPE4-NETWORK-MIB::ipStatsInDelivers,Counter32,read-only,,current,,ip InDelivers
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.2.8.7,BLADETYPE4-NETWORK-MIB::ipStatsOutRequests,Counter32,read-only,,current,,ip OutRequests
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.2.8.8,BLADETYPE4-NETWORK-MIB::ipStatsOutDiscards,Counter32,read-only,,current,,ip OutDiscards
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.2.8.9,BLADETYPE4-NETWORK-MIB::ipStatsDefaultTTL,Counter32,read-only,,current,,ip DefaultTTL
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.2.9,BLADETYPE4-NETWORK-MIB::icmpStats,,,,,,
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.2.9.1,BLADETYPE4-NETWORK-MIB::icmpStatsInMsgs,Counter32,read-only,,current,,icmp InMsgs
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.2.9.2,BLADETYPE4-NETWORK-MIB::icmpStatsInErrors,Counter32,read-only,,current,,icmp InErrors
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.2.9.3,BLADETYPE4-NETWORK-MIB::icmpStatsInDestUnreachs,Counter32,read-only,,current,,icmp InDestUnreachs
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.2.9.4,BLADETYPE4-NETWORK-MIB::icmpStatsInTimeExcds,Counter32,read-only,,current,,icmp InTimeExcds
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.2.9.5,BLADETYPE4-NETWORK-MIB::icmpStatsInParmProbs,Counter32,read-only,,current,,icmp InParmProbs
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.2.9.6,BLADETYPE4-NETWORK-MIB::icmpStatsInSrcQuenchs,Counter32,read-only,,current,,icmp InSrcQuenchs
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.2.9.7,BLADETYPE4-NETWORK-MIB::icmpStatsInRedirects,Counter32,read-only,,current,,icmp InRedirects
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.2.9.8,BLADETYPE4-NETWORK-MIB::icmpStatsInEchos,Counter32,read-only,,current,,icmp InEchos
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.2.9.9,BLADETYPE4-NETWORK-MIB::icmpStatsInEchoReps,Counter32,read-only,,current,,icmp InEchoReps
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.2.9.10,BLADETYPE4-NETWORK-MIB::icmpStatsInTimestamps,Counter32,read-only,,current,,icmp InTimestamps
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.2.9.11,BLADETYPE4-NETWORK-MIB::icmpStatsInTimestampReps,Counter32,read-only,,current,,icmp InTimestampReps
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.2.9.12,BLADETYPE4-NETWORK-MIB::icmpStatsInAddrMasks,Counter32,read-only,,current,,icmp InAddrMasks
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.2.9.13,BLADETYPE4-NETWORK-MIB::icmpStatsInAddrMaskReps,Counter32,read-only,,current,,icmp InAddrMaskReps
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.2.9.14,BLADETYPE4-NETWORK-MIB::icmpStatsOutMsgs,Counter32,read-only,,current,,icmp OutMsgs
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.2.9.15,BLADETYPE4-NETWORK-MIB::icmpStatsOutErrors,Counter32,read-only,,current,,icmp OutErrors
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.2.9.16,BLADETYPE4-NETWORK-MIB::icmpStatsOutDestUnreachs,Counter32,read-only,,current,,icmp OutDestUnreachs
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.2.9.17,BLADETYPE4-NETWORK-MIB::icmpStatsOutTimeExcds,Counter32,read-only,,current,,icmp OutTimeExcds
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.2.9.18,BLADETYPE4-NETWORK-MIB::icmpStatsOutParmProbs,Counter32,read-only,,current,,icmp OutParmProbs
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.2.9.19,BLADETYPE4-NETWORK-MIB::icmpStatsOutSrcQuenchs,Counter32,read-only,,current,,icmp OutSrcQuenchs
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.2.9.20,BLADETYPE4-NETWORK-MIB::icmpStatsOutRedirects,Counter32,read-only,,current,,icmp OutRedirects
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.2.9.21,BLADETYPE4-NETWORK-MIB::icmpStatsOutEchos,Counter32,read-only,,current,,icmp OutEchos
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.2.9.22,BLADETYPE4-NETWORK-MIB::icmpStatsOutEchoReps,Counter32,read-only,,current,,icmp OutEchoReps
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.2.9.23,BLADETYPE4-NETWORK-MIB::icmpStatsOutTimestamps,Counter32,read-only,,current,,icmp OutTimestamps
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.2.9.24,BLADETYPE4-NETWORK-MIB::icmpStatsOutTimestampReps,Counter32,read-only,,current,,icmp OutTimestampReps
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.2.9.25,BLADETYPE4-NETWORK-MIB::icmpStatsOutAddrMasks,Counter32,read-only,,current,,icmp OutAddrMasks
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.2.9.26,BLADETYPE4-NETWORK-MIB::icmpStatsOutAddrMaskReps,Counter32,read-only,,current,,icmp OutAddrMaskReps
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.2.10,BLADETYPE4-NETWORK-MIB::tcpStats,,,,,,
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.2.10.1,BLADETYPE4-NETWORK-MIB::tcpStatsRtoAlgorithm,Counter32,read-only,,current,,tcp RtoAlgorithm
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.2.10.2,BLADETYPE4-NETWORK-MIB::tcpStatsRtoMin,Counter32,read-only,,current,,tcp RtoMin
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.2.10.3,BLADETYPE4-NETWORK-MIB::tcpStatsRtoMax,Counter32,read-only,,current,,tcp RtoMax
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.2.10.4,BLADETYPE4-NETWORK-MIB::tcpStatsMaxConn,Counter32,read-only,,current,,tcp MaxConn
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.2.10.5,BLADETYPE4-NETWORK-MIB::tcpStatsActiveOpens,Counter32,read-only,,current,,tcp ActiveOpens
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.2.10.6,BLADETYPE4-NETWORK-MIB::tcpStatsPassiveOpens,Counter32,read-only,,current,,tcp PassiveOpens
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.2.10.7,BLADETYPE4-NETWORK-MIB::tcpStatsAttemptFails,Counter32,read-only,,current,,tcp AttemptFails
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.2.10.8,BLADETYPE4-NETWORK-MIB::tcpStatsEstabResets,Counter32,read-only,,current,,tcp EstabResets
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.2.10.9,BLADETYPE4-NETWORK-MIB::tcpStatsInSegs,Counter32,read-only,,current,,tcp InSegs
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.2.10.10,BLADETYPE4-NETWORK-MIB::tcpStatsOutSegs,Counter32,read-only,,current,,tcp OutSegs
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.2.10.11,BLADETYPE4-NETWORK-MIB::tcpStatsRetransSegs,Counter32,read-only,,current,,tcp RetransSegs
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.2.10.12,BLADETYPE4-NETWORK-MIB::tcpStatsInErrs,Counter32,read-only,,current,,tcp InErrs
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.2.10.13,BLADETYPE4-NETWORK-MIB::tcpStatsCurrEstab,Counter32,read-only,,current,,tcp CurrEstab
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.2.10.14,BLADETYPE4-NETWORK-MIB::tcpStatsCurrConn,Counter32,read-only,,current,,tcp CurrConn
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.2.10.15,BLADETYPE4-NETWORK-MIB::tcpStatsOutRsts,Counter32,read-only,,current,,tcp OutRsts
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.2.11,BLADETYPE4-NETWORK-MIB::udpStats,,,,,,
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.2.11.1,BLADETYPE4-NETWORK-MIB::udpStatsInDatagrams,Counter32,read-only,,current,,udp InDatagrams
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.2.11.2,BLADETYPE4-NETWORK-MIB::udpStatsOutDatagrams,Counter32,read-only,,current,,udp OutDatagrams
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.2.11.3,BLADETYPE4-NETWORK-MIB::udpStatsInErrors,Counter32,read-only,,current,,udp InErrors
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.2.11.4,BLADETYPE4-NETWORK-MIB::udpStatsNoPorts,Counter32,read-only,,current,,udp NoPorts
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.2.13,BLADETYPE4-NETWORK-MIB::rip2Stats,,,,,,
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.2.13.1,BLADETYPE4-NETWORK-MIB::ripStatInPackets,Counter32,read-only,,current,,The total number of RIP packets recieved.
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.2.13.2,BLADETYPE4-NETWORK-MIB::ripStatOutPackets,Counter32,read-only,,current,,The total number of RIP packets transmitted.
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.2.13.3,BLADETYPE4-NETWORK-MIB::ripStatInRequestPkts,Counter32,read-only,,current,,The total number of RIP requests recieved.
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.2.13.4,BLADETYPE4-NETWORK-MIB::ripStatInResponsePkts,Counter32,read-only,,current,,The total number of RIP response recieved.
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.2.13.5,BLADETYPE4-NETWORK-MIB::ripStatOutRequestPkts,Counter32,read-only,,current,,The total number of RIP requests transmitted.
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.2.13.6,BLADETYPE4-NETWORK-MIB::ripStatOutResponsePkts,Counter32,read-only,,current,,The total number of RIP responses transmitted.
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.2.13.7,BLADETYPE4-NETWORK-MIB::ripStatRouteTimeout,Counter32,read-only,,current,,The total number of RIP route timeouts.
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.2.13.8,BLADETYPE4-NETWORK-MIB::ripStatInBadSizePkts,Counter32,read-only,,current,,The total number of bad size RIP packets recieved.
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.2.13.9,BLADETYPE4-NETWORK-MIB::ripStatInBadVersion,Counter32,read-only,,current,,The total number of RIP bad versions recieved.
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.2.13.10,BLADETYPE4-NETWORK-MIB::ripStatInBadZeros,Counter32,read-only,,current,,The total number of RIP bad zeros recieved.
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.2.13.11,BLADETYPE4-NETWORK-MIB::ripStatInBadSourcePort,Counter32,read-only,,current,,The total number of RIP bad source port recieved.
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.2.13.12,BLADETYPE4-NETWORK-MIB::ripStatInBadSourceIP,Counter32,read-only,,current,,The total number of RIP bad source IP recieved.
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.2.13.13,BLADETYPE4-NETWORK-MIB::ripStatInSelfRcvPkts,Counter32,read-only,,current,,The total number of RIP packets from self received.
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.2.14,BLADETYPE4-NETWORK-MIB::dnsStats,,,,,,
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.2.14.1,BLADETYPE4-NETWORK-MIB::dnsStatInGoodDnsRequests,Counter32,read-only,,current,,The total number of good DNS request packets received.
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.2.14.2,BLADETYPE4-NETWORK-MIB::dnsStatOutDnsRequests,Counter32,read-only,,current,,The total number of DNS request packets
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.2.14.3,BLADETYPE4-NETWORK-MIB::dnsStatInBadDnsRequests,Counter32,read-only,,current,,The total number of bad DNS request packets received
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.2.15,BLADETYPE4-NETWORK-MIB::geal3Stats,,,,,,
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.2.15.1,BLADETYPE4-NETWORK-MIB::maxL3TableSize,Integer32,read-only,,current,,Max L3 table size
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.2.15.2,BLADETYPE4-NETWORK-MIB::noL3EntriesUsed,Integer32,read-only,,current,,Number of L3 entries used
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.2.15.3,BLADETYPE4-NETWORK-MIB::maxLpmTableSize,Integer32,read-only,,current,,Max LPM table size
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.2.15.4,BLADETYPE4-NETWORK-MIB::noLpmEntriesUsed,Integer32,read-only,,current,,Number of LPM entries used
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.2.15.5,BLADETYPE4-NETWORK-MIB::maxBlockInLpmTable,Integer32,read-only,,current,,Max number of blocks in LPM table
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.2.15.6,BLADETYPE4-NETWORK-MIB::noBlocksUsedInLpmTable,Integer32,read-only,,current,,Number of blocks used in LPM table
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.3,BLADETYPE4-NETWORK-MIB::layer3Info,,,,,,
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.3.1,BLADETYPE4-NETWORK-MIB::ipRoutingInfo,,,,,,
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.3.1.1,BLADETYPE4-NETWORK-MIB::ipRouteInfoTable,,not-accessible,,current,,The table of run-time IP routes.
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.3.1.1.1,BLADETYPE4-NETWORK-MIB::ipRouteInfoEntry,,not-accessible,ipRouteInfoIndx,current,,A row in the run-time IP route table
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.3.1.1.1.1,BLADETYPE4-NETWORK-MIB::ipRouteInfoIndx,Integer32,read-only,,current,,The index of this route table.
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.3.1.1.1.2,BLADETYPE4-NETWORK-MIB::ipRouteInfoDestIp,IpAddress,read-only,,current,,The destination IP address of this route.
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.3.1.1.1.3,BLADETYPE4-NETWORK-MIB::ipRouteInfoMask,IpAddress,read-only,,current,,The destination IP mask of this route.
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.3.1.1.1.4,BLADETYPE4-NETWORK-MIB::ipRouteInfoGateway,IpAddress,read-only,,current,,The next-hop router address for this route.
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.3.1.1.1.5,BLADETYPE4-NETWORK-MIB::ipRouteInfoTag,INTEGER,read-only,,current,fixed(1):static(2):addr(3):rip(4):broadcast(5):martian(6):multicast(7):vip(8):bgp(9):ospf(10):none(11),The tag-type for this route.
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.3.1.1.1.6,BLADETYPE4-NETWORK-MIB::ipRouteInfoType,INTEGER,read-only,,current,indirect(1):direct(2):local(3):broadcast(4):martian(5):multicast(6):other(7),The type of the route.
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.3.1.1.1.7,BLADETYPE4-NETWORK-MIB::ipRouteInfoInterface,Integer32,read-only,,current,,The interface number for which the destination address is applicable.
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.3.1.1.1.8,BLADETYPE4-NETWORK-MIB::ipRouteInfoMetric,Integer32,read-only,,current,,The metric of this route.
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.3.1.2,BLADETYPE4-NETWORK-MIB::routeTableClear,INTEGER,read-write,,current,ok(1):clear(2),Setting this value to clear(2) clears the route table.
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.3.2,BLADETYPE4-NETWORK-MIB::arpInfo,,,,,,
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.3.2.1,BLADETYPE4-NETWORK-MIB::arpInfoTable,,not-accessible,,current,,The table of ARP entries.
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.3.2.1.1,BLADETYPE4-NETWORK-MIB::arpInfoEntry,,not-accessible,arpInfoDestIp,current,,A row in the ARP table
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.3.2.1.1.1,BLADETYPE4-NETWORK-MIB::arpInfoDestIp,IpAddress,read-only,,current,,The destination IP address of the ARP entry.
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.3.2.1.1.2,BLADETYPE4-NETWORK-MIB::arpInfoMacAddr,OCTET,read-only,,current,,The MAC address for the ARP entry.
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.3.2.1.1.3,BLADETYPE4-NETWORK-MIB::arpInfoVLAN,Integer32,read-only,,current,,The VLAN identifier for the ARP entry.
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.3.2.1.1.4,BLADETYPE4-NETWORK-MIB::arpInfoSrcPort,Unsigned32,read-only,,current,,The port number on which this entry's equivalence is effective.
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.3.2.1.1.6,BLADETYPE4-NETWORK-MIB::arpInfoFlag,INTEGER,read-only,,current,clear(1):unresolved(2):permanent(3):indirect(4),The flag associated with this ARP entry.
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.3.2.2,BLADETYPE4-NETWORK-MIB::arpCacheClear,INTEGER,read-write,,current,ok(1):clear(2),Setting this value to clear(2) clears the ARP cache.
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.3.3,BLADETYPE4-NETWORK-MIB::vrrpInfo,,,,,,
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.3.3.1,BLADETYPE4-NETWORK-MIB::vrrpInfoVirtRtrTable,,not-accessible,,current,,The table of VRRP virtual router run-time information.
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.3.3.1.1,BLADETYPE4-NETWORK-MIB::vrrpInfoVirtRtrTableEntry,,not-accessible,vrrpInfoVirtRtrIndex,current,,The run-time information about a VRRP virtual router.
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.3.3.1.1.1,BLADETYPE4-NETWORK-MIB::vrrpInfoVirtRtrIndex,Integer32,read-only,,current,,The VRRP virtual router index.
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.3.3.1.1.2,BLADETYPE4-NETWORK-MIB::vrrpInfoVirtRtrConfig,INTEGER,read-only,,current,enabled(1):disabled(2),The status of the VRRP virtual router.
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.3.3.1.1.3,BLADETYPE4-NETWORK-MIB::vrrpInfoVirtRtrID,INTEGER,read-only,,current,,The VRRP virtual router identifier.
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.3.3.1.1.4,BLADETYPE4-NETWORK-MIB::vrrpInfoVirtRtrAddr,IpAddress,read-only,,current,,The VRRP virtual router IP address.
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.3.3.1.1.5,BLADETYPE4-NETWORK-MIB::vrrpInfoVirtRtrIfIndex,Integer32,read-only,,current,,The IfIndex that the VRRP virtual router is representing.
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.3.3.1.1.6,BLADETYPE4-NETWORK-MIB::vrrpInfoVirtRtrPriority,INTEGER,read-only,,current,,The priority value to be used by the specified VRRP virtual routers.
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.3.3.1.1.7,BLADETYPE4-NETWORK-MIB::vrrpInfoVirtRtrState,INTEGER,read-only,,current,init(1):master(2):backup(3),The VRRP virtual router state.
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.3.3.1.1.8,BLADETYPE4-NETWORK-MIB::vrrpInfoVirtRtrOwnership,INTEGER,read-only,,current,owner(1):renter(2),The VRRP virtual router ownership status.
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.3.4,BLADETYPE4-NETWORK-MIB::ospfInfo,,,,,,
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.3.4.1,BLADETYPE4-NETWORK-MIB::ospfGeneralInfo,,,,,,
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.3.4.1.1,BLADETYPE4-NETWORK-MIB::ospfVersion,INTEGER,read-only,,current,ospfVersion1(1):ospfVersion2(2),OSPF version.
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.3.4.1.2,BLADETYPE4-NETWORK-MIB::ospfRouterID,IpAddress,read-only,,current,,The router ID of the switch.
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.3.4.1.3,BLADETYPE4-NETWORK-MIB::ospfStartTime,Integer32,read-only,,current,,The time when ospf has been started.
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.3.4.1.4,BLADETYPE4-NETWORK-MIB::ospfProcessUptime,Counter32,read-only,,current,,The time since ospf has been started.
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.3.4.1.5,BLADETYPE4-NETWORK-MIB::ospfLsTypesSupported,Integer32,read-only,,current,,The Link State Types that are supported.
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.3.4.1.6,BLADETYPE4-NETWORK-MIB::ospfAreaBorderRouter,INTEGER,read-only,,current,yes(1):no(2),Area Border Router Role.
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.3.4.1.7,BLADETYPE4-NETWORK-MIB::ospfAreaBoundaryRouter,INTEGER,read-only,,current,yes(1):no(2),Area Boundary Router Role.
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.3.4.1.8,BLADETYPE4-NETWORK-MIB::ospfExternalLsa,Integer32,read-only,,current,,The number of external LSAs.
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.3.4.1.9,BLADETYPE4-NETWORK-MIB::ospfIntfCountForRouter,Integer32,read-only,,current,,The number of interfaces for this router.
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.3.4.1.10,BLADETYPE4-NETWORK-MIB::ospfVlinkCountForRouter,Integer32,read-only,,current,,The number of virtual links for this router.
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.3.4.1.11,BLADETYPE4-NETWORK-MIB::ospfNewLsaReceived,Integer32,read-only,,current,,The number of new LSAs reveived.
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.3.4.1.12,BLADETYPE4-NETWORK-MIB::ospfTotalLsaOriginated,Integer32,read-only,,current,,The number of LSAs originated.
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.3.4.1.13,BLADETYPE4-NETWORK-MIB::ospfTotalNumberOfLsdbEntries,Integer32,read-only,,current,,Total number of entries in the Link State Database.
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.3.4.1.14,BLADETYPE4-NETWORK-MIB::ospfTotalNeighbours,Integer32,read-only,,current,,The total number of OSPF neighbours.
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.3.4.1.15,BLADETYPE4-NETWORK-MIB::ospfNbrInInitState,Integer32,read-only,,current,,The number of neighbours in the initial state of exchange.
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.3.4.1.16,BLADETYPE4-NETWORK-MIB::ospfNbrInExchState,Integer32,read-only,,current,,The number of neighbours in the exchange state.
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.3.4.1.17,BLADETYPE4-NETWORK-MIB::ospfNbrInFullState,Integer32,read-only,,current,,The number of neighbours in the Full state of exchange.
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.3.4.1.18,BLADETYPE4-NETWORK-MIB::ospfTotalAreas,Integer32,read-only,,current,,The Total number of areas.
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.3.4.1.19,BLADETYPE4-NETWORK-MIB::ospfTotalTransitAreas,Integer32,read-only,,current,,The Total number of Transit areas.
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.3.4.1.20,BLADETYPE4-NETWORK-MIB::ospfTotalNssaAreas,Integer32,read-only,,current,,The Total number of NSSA areas.
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.3.4.1.21,BLADETYPE4-NETWORK-MIB::ospfTotalStubAreas,Integer32,read-only,,current,,The Total number of STUB areas.
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.3.4.2,BLADETYPE4-NETWORK-MIB::ospfAreaInfoTable,,not-accessible,,current,,The table of OSPF Area information.
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.3.4.2.1,BLADETYPE4-NETWORK-MIB::ospfAreaInfoEntry,,not-accessible,ospfAreaInfoIndex,current,,Information about a OSPF area.
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.3.4.2.1.1,BLADETYPE4-NETWORK-MIB::ospfAreaInfoIndex,Integer32,read-only,,current,,The OSPF area number for which the OSPF info table is related.
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.3.4.2.1.2,BLADETYPE4-NETWORK-MIB::ospfAreaInfoId,IpAddress,read-only,,current,,The IP address of the OSPF area.
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.3.4.2.1.3,BLADETYPE4-NETWORK-MIB::ospfAreaInfoStatus,INTEGER,read-only,,current,disabled(0):enabled(1),Area Status: disabled(0), enabled(1).
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.3.4.2.1.4,BLADETYPE4-NETWORK-MIB::ospfTotalNumberOfInterfaces,Integer32,read-only,,current,,The total number of interfaces for this OSPF area.
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.3.4.2.1.5,BLADETYPE4-NETWORK-MIB::ospfNumberOfInterfacesUp,Integer32,read-only,,current,,The number of interfaces UP in area.
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.3.4.2.1.6,BLADETYPE4-NETWORK-MIB::ospfAreaInfoAuthType,INTEGER,read-only,,current,none(1):password(2):md5(3),Type of authentication being used: none(1) - no authentication password(2) - use password md5(3) - use MD5 authentication.
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.3.4.2.1.7,BLADETYPE4-NETWORK-MIB::ospfAreaInfoSPF,Integer32,read-only,,current,,The number of times SPF ran.
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.3.4.2.1.8,BLADETYPE4-NETWORK-MIB::ospfNumberOfLsdbEntries,Integer32,read-only,,current,,The number of Link State Database entries for this OSPF area.
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.3.4.2.1.9,BLADETYPE4-NETWORK-MIB::ospfAreaInfoAreaBorderRouter,Integer32,read-only,,current,,The Area Border Router count.
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.3.4.2.1.10,BLADETYPE4-NETWORK-MIB::ospfAreaInfoASBoundaryRouter,Integer32,read-only,,current,,The AS Boundary Router count.
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.3.4.2.1.11,BLADETYPE4-NETWORK-MIB::ospfAreaInfoTotalNeighbours,Integer32,read-only,,current,,The total number of OSPF neighbors.
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.3.4.2.1.12,BLADETYPE4-NETWORK-MIB::ospfAreaInfoNeighborsINITstate,Integer32,read-only,,current,,Total neighbors in INIT state.
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.3.4.2.1.13,BLADETYPE4-NETWORK-MIB::ospfAreaInfoNeighborsEXCHstate,Integer32,read-only,,current,,Total neighbors in EXCH state.
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.3.4.2.1.14,BLADETYPE4-NETWORK-MIB::ospfAreaInfoNeighborsFULLstate,Integer32,read-only,,current,,Total neighbors in FULL state.
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.3.4.2.1.15,BLADETYPE4-NETWORK-MIB::ospfAreaInfoLsTypesAccepted,OCTET,read-only,,current,,LS types accepted by this area.
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.3.4.3,BLADETYPE4-NETWORK-MIB::ospfIntfInfoTable,,not-accessible,,current,,The table of OSPF Interface information.
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.3.4.3.1,BLADETYPE4-NETWORK-MIB::ospfIntfInfoEntry,,not-accessible,ospfIfInfoIndex,current,,Information about a OSPF interface.
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.3.4.3.1.1,BLADETYPE4-NETWORK-MIB::ospfIfInfoIndex,Integer32,read-only,,current,,The OSPF interface number for which the OSPF info table is related.
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.3.4.3.1.2,BLADETYPE4-NETWORK-MIB::ospfIfInfoIpAddress,IpAddress,read-only,,current,,The IP address of the OSPF interface.
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.3.4.3.1.3,BLADETYPE4-NETWORK-MIB::ospfIfInfoArea,INTEGER,read-only,,current,,The index of the area that the interface belongs.
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.3.4.3.1.4,BLADETYPE4-NETWORK-MIB::ospfIfInfoAdminStatus,INTEGER,read-only,,current,down(0):up(1),Admin Status of the interface: down(0), up(1).
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.3.4.3.1.6,BLADETYPE4-NETWORK-MIB::ospfIfInfoRouterID,IpAddress,read-only,,current,,The router ID of the switch.
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.3.4.3.1.7,BLADETYPE4-NETWORK-MIB::ospfIfInfoState,INTEGER,read-only,,current,down(0):loopback(1):waiting(2):ptop(3):dr(4):backupdr(5):drother(6),The state of the interface: Down(0), Loopback(1), Waiting(2), P to P(3), DR(4), BackuDR(5), DR Other(6).
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.3.4.3.1.8,BLADETYPE4-NETWORK-MIB::ospfIfInfoPriority,INTEGER,read-only,,current,,Interface router priority
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.3.4.3.1.9,BLADETYPE4-NETWORK-MIB::ospfIfInfoDesignatedRouterID,IpAddress,read-only,,current,,The OSPF Designated Router ID for this OSPF interface.
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.3.4.3.1.10,BLADETYPE4-NETWORK-MIB::ospfIfInfoDesignatedRouterIpAddress,IpAddress,read-only,,current,,The OSPF Designated Router IP Address for this OSPF interface.
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.3.4.3.1.11,BLADETYPE4-NETWORK-MIB::ospfIfInfoBackupDesignatedRouterID,IpAddress,read-only,,current,,The OSPF Backup Designated Router ID for this OSPF interface.
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.3.4.3.1.12,BLADETYPE4-NETWORK-MIB::ospfIfInfoBackupDesignatedRouterIpAddress,IpAddress,read-only,,current,,The OSPF Backup Designated Router Ip Address for this OSPF interface.
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.3.4.3.1.13,BLADETYPE4-NETWORK-MIB::ospfIfInfoHello,INTEGER,read-only,,current,,The hello timer for this OSPF interface.
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.3.4.3.1.15,BLADETYPE4-NETWORK-MIB::ospfIfInfoDead,INTEGER,read-only,,current,,The dead timer for this OSPF interface.
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.3.4.3.1.17,BLADETYPE4-NETWORK-MIB::ospfIfInfoWait,Integer32,read-only,,current,,The OSPF Wait interval for this OSPF interface.
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.3.4.3.1.19,BLADETYPE4-NETWORK-MIB::ospfIfInfoRetransmit,INTEGER,read-only,,current,,The retransmit interval for this OSPF interface.
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.3.4.3.1.20,BLADETYPE4-NETWORK-MIB::ospfIfInfoTransitDelay,INTEGER,read-only,,current,,The transit delay for this OSPF interface.
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.3.4.3.1.21,BLADETYPE4-NETWORK-MIB::ospfIfInfoTotalNeighbours,Integer32,read-only,,current,,The total number of neighbours for this OSPF interface.
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.3.4.3.1.22,BLADETYPE4-NETWORK-MIB::ospfIfInfoEvents,Integer32,read-only,,current,,The total number of events for this OSPF interface.
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.3.4.3.1.23,BLADETYPE4-NETWORK-MIB::ospfIfInfoAuthType,INTEGER,read-only,,current,none(1):password(2):md5(3),Type of authentication being used: none(1) - no authentication, password(2) - use password, md5(3) - use MD5 authentication.
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.3.4.4,BLADETYPE4-NETWORK-MIB::ospfVirtIntfInfoTable,,not-accessible,,current,,The table of OSPF virtual interfaces information.
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.3.4.4.1,BLADETYPE4-NETWORK-MIB::ospfVirtIntfInfoEntry,,not-accessible,ospfVirtIntfInfoIndex,current,,Information about an OSPF virtual interface.
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.3.4.4.1.1,BLADETYPE4-NETWORK-MIB::ospfVirtIntfInfoIndex,Integer32,read-only,,current,,The OSPF Virtual Interface number for which this table is related.
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.3.4.4.1.2,BLADETYPE4-NETWORK-MIB::ospfVirtIntfInfoIpAddr,IpAddress,read-only,,current,,The IP Address of this virtual interface.
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.3.4.4.1.3,BLADETYPE4-NETWORK-MIB::ospfVirtIntfInfoArea,INTEGER,read-only,,current,,The index of the OSPF area to which this virtual interface belongs.
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.3.4.4.1.4,BLADETYPE4-NETWORK-MIB::ospfVirtIntfInfoRouterId,IpAddress,read-only,,current,,The Router ID.
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.3.4.4.1.5,BLADETYPE4-NETWORK-MIB::ospfVirtIntfInfoState,INTEGER,read-only,,current,disabled(0):enabled(1),State disabled(0), enabled(1)
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.3.4.4.1.6,BLADETYPE4-NETWORK-MIB::ospfVirtIntfInfoCost,INTEGER,read-only,,current,,The cost of the virtual interface.
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.3.4.4.1.7,BLADETYPE4-NETWORK-MIB::ospfVirtIntfInfoTrans,INTEGER,read-only,,current,,The transit delay for the virtual interface.
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.3.4.4.1.8,BLADETYPE4-NETWORK-MIB::ospfVirtIntfInfoHello,INTEGER,read-only,,current,,Hello interval.
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.3.4.4.1.10,BLADETYPE4-NETWORK-MIB::ospfVirtIntfInfoDead,INTEGER,read-only,,current,,Dead interval.
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.3.4.4.1.12,BLADETYPE4-NETWORK-MIB::ospfVirtIntfInfoWait,INTEGER,read-only,,current,,Wait interval.
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.3.4.4.1.14,BLADETYPE4-NETWORK-MIB::ospfVirtIntfInfoRetra,INTEGER,read-only,,current,,Retransmit interval.
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.3.4.4.1.15,BLADETYPE4-NETWORK-MIB::ospfVirtIntfInfoAuth,OCTET,read-only,,current,,Authentication.
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.3.4.4.1.16,BLADETYPE4-NETWORK-MIB::ospfVirtIntfInfoEvents,INTEGER,read-only,,current,,Events.
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.3.4.4.1.17,BLADETYPE4-NETWORK-MIB::ospfVirtIntfInfoNbr,IpAddress,read-only,,current,,The IP Address of the OSPF neighbor for this virtual interface.
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.3.4.4.1.18,BLADETYPE4-NETWORK-MIB::ospfVirtIntfInfoNbrState,INTEGER,read-only,,current,down(0):attempt(1):init(2):twoway(3):exstart(4):exchange(5):loading(6):full(7),State down(0),attempt(1),init(2),2 way(3), exstart(4),exchange(5),loading(6),full(7)
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.3.4.4.1.19,BLADETYPE4-NETWORK-MIB::ospfVirtIntfInfoAreaId,IpAddress,read-only,,current,,Thea AreaId of the virtual interface.
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.3.4.5,BLADETYPE4-NETWORK-MIB::ospfIfNbrTable,,not-accessible,,current,,The table of OSPF Interface Neighbor information.
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.3.4.5.1,BLADETYPE4-NETWORK-MIB::ospfIfNbrEntry,,not-accessible,ospfIfNbrIntfIndex:ospfIfNbrIpAddr,current,,Information about a OSPF interface, neighbor pair.
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.3.4.5.1.1,BLADETYPE4-NETWORK-MIB::ospfIfNbrIntfIndex,Integer32,read-only,,current,,The OSPF Interface number for which this Interface/Nbr table is  related.
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.3.4.5.1.2,BLADETYPE4-NETWORK-MIB::ospfIfNbrIpAddr,IpAddress,read-only,,current,,The OSPF Neighbor ID .
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.3.4.5.1.3,BLADETYPE4-NETWORK-MIB::ospfIfNbrPriority,Integer32,read-only,,current,,The priority of the OSPF neighbor.
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.3.4.5.1.4,BLADETYPE4-NETWORK-MIB::ospfIfNbrState,INTEGER,read-only,,current,down(1):attempt(2):init(3):twoway(4):exStart(5):exchange(6):loading(7):full(8),The state of the OSPF neighbor.
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.3.4.5.1.5,BLADETYPE4-NETWORK-MIB::ospfIfNbrDesignatedRtr,IpAddress,read-only,,current,,The IP Address of the Designated Router for this OSPF Neighbor.
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.3.4.5.1.6,BLADETYPE4-NETWORK-MIB::ospfIfNbrBackupDesignatedRtr,IpAddress,read-only,,current,,The IP Address of the backup designated Router for this OSPF Neighbor.
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.3.4.5.1.7,BLADETYPE4-NETWORK-MIB::ospfIfNbrIpAddress,IpAddress,read-only,,current,,The IP Address of the OSPF Neighbor.
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.3.4.6,BLADETYPE4-NETWORK-MIB::ospfSumRangesInfoTable,,not-accessible,,current,,The table of OSPF summary ranges information.
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.3.4.6.1,BLADETYPE4-NETWORK-MIB::ospfSumRangesInfoEntry,,not-accessible,ospfSumRangesInfoIndex,current,,Summary ranges information.
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.3.4.6.1.1,BLADETYPE4-NETWORK-MIB::ospfSumRangesInfoIndex,Integer32,read-only,,current,,The OSPF range index for which this table is related.
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.3.4.6.1.2,BLADETYPE4-NETWORK-MIB::ospfSumRangesInfoArea,INTEGER,read-only,,current,,Area.
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.3.4.6.1.3,BLADETYPE4-NETWORK-MIB::ospfSumRangesInfoNetwork,IpAddress,read-only,,current,,Network.
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.3.4.6.1.4,BLADETYPE4-NETWORK-MIB::ospfSumRangesInfoMask,IpAddress,read-only,,current,,Mask.
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.3.4.6.1.5,BLADETYPE4-NETWORK-MIB::ospfSumRangesInfoAction,INTEGER,read-only,,current,propagate(0):hide(1),Action propagate(0), hide(1)
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.3.4.6.1.6,BLADETYPE4-NETWORK-MIB::ospfSumRangesInfoListType,INTEGER,read-only,,current,non-nssa(0):nssa(1),Summary address list  Non-NSSA(0), NSSA(1)
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.3.4.7,BLADETYPE4-NETWORK-MIB::ospfRoutesInfoTable,,not-accessible,,current,,The table of OSPF routes information.
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.3.4.7.1,BLADETYPE4-NETWORK-MIB::ospfRoutesInfoEntry,,not-accessible,ospfRoutesInfoIndex,current,,OSPF routes information.
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.3.4.7.1.1,BLADETYPE4-NETWORK-MIB::ospfRoutesInfoIndex,Integer32,read-only,,current,,The OSPF route table entry index for which  this table is related.
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.3.4.7.1.2,BLADETYPE4-NETWORK-MIB::ospfRoutesInfoDestination,IpAddress,read-only,,current,,Destination.
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.3.4.7.1.3,BLADETYPE4-NETWORK-MIB::ospfRoutesInfoMask,IpAddress,read-only,,current,,Mask.
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.3.4.7.1.4,BLADETYPE4-NETWORK-MIB::ospfRoutesInfoVia,IpAddress,read-only,,current,,Next hop.
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.3.4.7.1.5,BLADETYPE4-NETWORK-MIB::ospfRoutesInfoType,OCTET,read-only,,current,,Route type. Codes: IA - OSPF inter area, N1 - OSPF NSSA external type 1, N2 - OSPF NSSA external type 2 E1 - OSPF external type 1, E2 - OSPF external type 2 * - best
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.3.4.8,BLADETYPE4-NETWORK-MIB::ospfLsdbInfoTable,,not-accessible,,current,,The OSPF Process's Link State Database.
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.3.4.8.1,BLADETYPE4-NETWORK-MIB::ospfLsdbInfoEntry,,not-accessible,ospfLsdbInfoIndex,current,,A single Link State Advertisement.
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.3.4.8.1.1,BLADETYPE4-NETWORK-MIB::ospfLsdbInfoIndex,Integer32,read-only,,current,,The 32 bit index in the table.
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.3.4.8.1.2,BLADETYPE4-NETWORK-MIB::ospfLsdbInfoAreaId,IpAddress,read-only,,current,,The 32 bit identifier of the Area from which the LSA was received.
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.3.4.8.1.3,BLADETYPE4-NETWORK-MIB::ospfLsdbInfoType,INTEGER,read-only,,current,routerLink(1):networkLink(2):summaryLink(3):asSummaryLink(4):asExternalLink(5):multicastLink(6):nssaExternalLink(7),The type of the link state advertisement. Each link state type has a separate advertise- ment format.
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.3.4.8.1.4,BLADETYPE4-NETWORK-MIB::ospfLsdbInfoLsid,IpAddress,read-only,,current,,The Link State ID is an LS Type Specific field containing either a Router ID or an IP Address; it identifies the piece of the routing domain that is being described by the advertisement.
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.3.4.8.1.5,BLADETYPE4-NETWORK-MIB::ospfLsdbInfoRouterId,IpAddress,read-only,,current,,The 32 bit number that uniquely identifies the originating router in the Autonomous System.
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.3.4.8.1.6,BLADETYPE4-NETWORK-MIB::ospfLsdbInfoSequence,OCTET,read-only,,current,,The sequence number field is a signed 32-bit integer. It is used to detect old and dupli- cate link state advertisements. The space of sequence numbers is linearly ordered. The larger the sequence number the more recent the advertisement - displayed here in hexazecimal.
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.3.4.8.1.7,BLADETYPE4-NETWORK-MIB::ospfLsdbInfoAge,Integer32,read-only,,current,,This field is the age of the link state adver- tisement in seconds.
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.3.4.8.1.8,BLADETYPE4-NETWORK-MIB::ospfLsdbInfoChecksum,Integer32,read-only,,current,,This field is the checksum of the complete contents of the advertisement, excepting the age field. The age field is excepted so that an advertisement's age can be incremented without updating the checksum. The checksum used is the same that is used for ISO connec- tionless datagrams; it is commonly referred to as the Fletcher checksum.
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.3.4.8.1.9,BLADETYPE4-NETWORK-MIB::ospfLsdbInfoAdvertisement,OCTET,read-only,,current,,The entire Link State Advertisement, including its header.
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.3.4.9,BLADETYPE4-NETWORK-MIB::ospfExtLsdbInfoTable,,not-accessible,,current,,The OSPF Process's Links State Database.
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.3.4.9.1,BLADETYPE4-NETWORK-MIB::ospfExtLsdbInfoEntry,,not-accessible,ospfExtLsdbInfoIndex,current,,A single Link State Advertisement.
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.3.4.9.1.1,BLADETYPE4-NETWORK-MIB::ospfExtLsdbInfoIndex,Integer32,read-only,,current,,The 32 bit index in the table.
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.3.4.9.1.2,BLADETYPE4-NETWORK-MIB::ospfExtLsdbInfoType,INTEGER,read-only,,current,asExternalLink(5),The type of the link state advertisement. Each link state type has a separate advertise- ment format.
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.3.4.9.1.3,BLADETYPE4-NETWORK-MIB::ospfExtLsdbInfoLsid,IpAddress,read-only,,current,,The Link State ID is an LS Type Specific field containing either a Router ID or an IP Address; it identifies the piece of the routing domain that is being described by the advertisement.
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.3.4.9.1.4,BLADETYPE4-NETWORK-MIB::ospfExtLsdbInfoRouterId,IpAddress,read-only,,current,,The 32 bit number that uniquely identifies the originating router in the Autonomous System.
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.3.4.9.1.5,BLADETYPE4-NETWORK-MIB::ospfExtLsdbInfoSequence,OCTET,read-only,,current,,The sequence number field is a signed 32-bit integer. It is used to detect old and dupli- cate link state advertisements. The space of sequence numbers is linearly ordered. The larger the sequence number the more recent the advertisement - displayed here in hexazecimal.
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.3.4.9.1.6,BLADETYPE4-NETWORK-MIB::ospfExtLsdbInfoAge,Integer32,read-only,,current,,This field is the age of the link state adver- tisement in seconds.
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.3.4.9.1.7,BLADETYPE4-NETWORK-MIB::ospfExtLsdbInfoChecksum,Integer32,read-only,,current,,This field is the checksum of the complete contents of the advertisement, excepting the age field. The age field is excepted so that an advertisement's age can be incremented without updating the checksum. The checksum used is the same that is used for ISO connec- tionless datagrams; it is commonly referred to as the Fletcher checksum.
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.3.4.9.1.8,BLADETYPE4-NETWORK-MIB::ospfExtLsdbInfoAdvertisement,OCTET,read-only,,current,,The entire Link State Advertisement, including its header.
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.3.5,BLADETYPE4-NETWORK-MIB::igmpInfo,,,,,,
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.3.5.1,BLADETYPE4-NETWORK-MIB::igmpInfoTable,,not-accessible,,current,,The table of IGMP group membership information.
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.3.5.1.1,BLADETYPE4-NETWORK-MIB::igmpInfoEntry,,not-accessible,igmpInfoIndex,current,,Information about an IGMP group member .
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.3.5.1.1.1,BLADETYPE4-NETWORK-MIB::igmpInfoIndex,Integer32,read-only,,current,,The igmp group number for which the IGMP info table is related.
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.3.5.1.1.2,BLADETYPE4-NETWORK-MIB::igmpInfoGroupId,IpAddress,read-only,,current,,The IP address of the IGMP group.
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.3.5.1.1.3,BLADETYPE4-NETWORK-MIB::igmpInfoVlanId,Integer32,read-only,,current,,The VLAN ID for this IGMP group.
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.3.5.1.1.5,BLADETYPE4-NETWORK-MIB::igmpInfoVersion,INTEGER,read-only,,current,v3(1):v2(2):v1(3),The Version of IGMP host.
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.3.5.1.1.6,BLADETYPE4-NETWORK-MIB::igmpInfoPortNum,Unsigned32,read-only,,current,,The Version of IGMP host.
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.3.5.1.1.7,BLADETYPE4-NETWORK-MIB::igmpInfoExpires,OCTET,read-only,,current,,The expiration time for this host.
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.3.5.2,BLADETYPE4-NETWORK-MIB::igmpMrtrInfoTable,,not-accessible,,current,,The table of IGMP mrouters.
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.3.5.2.1,BLADETYPE4-NETWORK-MIB::igmpMrtrInfoEntry,,not-accessible,igmpMrtrInfoIndex,current,,Information about an IGMP mrouter.
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.3.5.2.1.1,BLADETYPE4-NETWORK-MIB::igmpMrtrInfoIndex,Integer32,read-only,,current,,The mrouter number for which the IGMP mrouter info table is related.
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.3.5.2.1.2,BLADETYPE4-NETWORK-MIB::igmpMrtrInfoVlanId,Integer32,read-only,,current,,The VLAN ID on which this IGMP mrouter is attached.
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.3.5.2.1.3,BLADETYPE4-NETWORK-MIB::igmpMrtrInfoPortId,Unsigned32,read-only,,current,,The port on which this IGMP mrouter is attached.
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.3.5.2.1.4,BLADETYPE4-NETWORK-MIB::igmpMrtrInfoVersion,Integer32,read-only,,current,,The version of this IGMP mrouter.
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.3.5.2.1.5,BLADETYPE4-NETWORK-MIB::igmpMrtrInfoExpires,OCTET,read-only,,current,,The expiration time for this mrouter.
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.3.5.2.1.6,BLADETYPE4-NETWORK-MIB::igmpMrtrInfoMrt,Integer32,read-only,,current,,The Maximum Query Response time of this IGMP mrouter.
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.3.5.3,BLADETYPE4-NETWORK-MIB::igmpClearTables,INTEGER,read-write,,current,ok(0):clearGroups(1):clearMrouters(2):clearAll(3),Clear the IGMP tables. When setting clearGroups(1), the dynamic groups are removed, when setting clearMrouters(2), the mrouter tables are removed and when setting clearAll(3), both the dynamic groups and the mrouter tables are removed. When read, ok(0) is always returned.
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.3.7,BLADETYPE4-NETWORK-MIB::rip2Info,,,,,,
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.3.7.1,BLADETYPE4-NETWORK-MIB::rip2GeneralInfo,,,,,,
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.3.7.1.1,BLADETYPE4-NETWORK-MIB::ripInfoState,INTEGER,read-only,,current,on(1):off(2),RIP global state.
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.3.7.1.2,BLADETYPE4-NETWORK-MIB::ripInfoUpdatePeriod,INTEGER,read-only,,current,,Update Period in seconds.
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.3.7.2,BLADETYPE4-NETWORK-MIB::rip2InfoIntfTable,,not-accessible,,current,,The information table of RIP.
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.3.7.2.1,BLADETYPE4-NETWORK-MIB::ripInfoIntfEntry,,not-accessible,ripInfoIntfIndex,current,,Information about RIP on IP interface.
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.3.7.2.1.1,BLADETYPE4-NETWORK-MIB::ripInfoIntfIndex,Integer32,read-only,,current,,The interface number for which the RIP information is related.
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.3.7.2.1.2,BLADETYPE4-NETWORK-MIB::ripInfoIntfVersion,INTEGER,read-only,,current,ripVersion1(1):ripVersion2(2):ripVersionBoth(3),RIP version.
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.3.7.2.1.3,BLADETYPE4-NETWORK-MIB::ripInfoIntfAddress,IpAddress,read-only,,current,,The interface address.
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.3.7.2.1.4,BLADETYPE4-NETWORK-MIB::ripInfoIntfState,INTEGER,read-only,,current,enabled(1):disabled(2),The status of RIP protocol.
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.3.7.2.1.5,BLADETYPE4-NETWORK-MIB::ripInfoIntfListen,INTEGER,read-only,,current,enabled(1):disabled(2),The status of listening to route updates.
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.3.7.2.1.6,BLADETYPE4-NETWORK-MIB::ripInfoIntfTrigUpdate,INTEGER,read-only,,current,enabled(1):disabled(2),The status of triggered updates.
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.3.7.2.1.7,BLADETYPE4-NETWORK-MIB::ripInfoIntfMcastUpdate,INTEGER,read-only,,current,enabled(1):disabled(2),The status of multicast updates.
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.3.7.2.1.8,BLADETYPE4-NETWORK-MIB::ripInfoIntfPoisonReverse,INTEGER,read-only,,current,enabled(1):disabled(2),The status of RIP poison reverse.
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.3.7.2.1.9,BLADETYPE4-NETWORK-MIB::ripInfoIntfSupply,INTEGER,read-only,,current,enabled(1):disabled(2),The status of supplying route updates.
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.3.7.2.1.10,BLADETYPE4-NETWORK-MIB::ripInfoIntfMetric,INTEGER,read-only,,current,,RIP route metric for this interface.
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.3.7.2.1.11,BLADETYPE4-NETWORK-MIB::ripInfoIntfAuth,INTEGER,read-only,,current,none(1):password(2),The type of Authentication used on this interface.
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.3.7.2.1.12,BLADETYPE4-NETWORK-MIB::ripInfoIntfKey,OCTET,read-only,,current,,RIP update authentication password.
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.3.7.2.1.13,BLADETYPE4-NETWORK-MIB::ripInfoIntfDefault,INTEGER,read-only,,current,both(1):listen(2):supply(3):none(4),Specifies what RIP does with default routes.
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.3.8,BLADETYPE4-NETWORK-MIB::ipInfo,,,,,,
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.3.8.1,BLADETYPE4-NETWORK-MIB::ipInfoRouterID,IpAddress,read-only,,current,,Router ID information.
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.3.8.2,BLADETYPE4-NETWORK-MIB::ipIntfInfoTable,,not-accessible,,current,,The table of IP interface information.
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.3.8.2.1,BLADETYPE4-NETWORK-MIB::intfInfoEntry,,not-accessible,intfInfoIndex,current,,A row in IP interface information table.
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.3.8.2.1.1,BLADETYPE4-NETWORK-MIB::intfInfoIndex,Integer32,read-only,,current,,The interface number for which the information is related.
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.3.8.2.1.2,BLADETYPE4-NETWORK-MIB::intfInfoAddr,OCTET,read-only,,current,,The IP address of the interface.
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.3.8.2.1.3,BLADETYPE4-NETWORK-MIB::intfInfoNetMask,OCTET,read-only,,current,,The subnet mask of the interface.
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.3.8.2.1.4,BLADETYPE4-NETWORK-MIB::intfInfoBcastAddr,OCTET,read-only,,current,,The broadcast address of the interface.
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.3.8.2.1.5,BLADETYPE4-NETWORK-MIB::intfInfoVlan,Integer32,read-only,,current,,The VLAN number for this interface.
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.3.8.2.1.6,BLADETYPE4-NETWORK-MIB::intfInfoStatus,INTEGER,read-only,,current,up(1):down(2):disabled(3),The status of the interface.
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.3.8.3,BLADETYPE4-NETWORK-MIB::gatewayInfoTable,,not-accessible,,current,,The table containing information for the default gateways.
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.3.8.3.1,BLADETYPE4-NETWORK-MIB::gatewayInfoEntry,,not-accessible,gatewayInfoIndex,current,,A row in the gateway information table
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.3.8.3.1.1,BLADETYPE4-NETWORK-MIB::gatewayInfoIndex,Integer32,read-only,,current,,The gateway number for which the information is related.
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.3.8.3.1.2,BLADETYPE4-NETWORK-MIB::gatewayInfoAddr,IpAddress,read-only,,current,,The IP address of the default gateway.
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.3.8.3.1.3,BLADETYPE4-NETWORK-MIB::gatewayInfoVlan,Integer32,read-only,,current,,The VLAN number for this gateway (0 for any).
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.3.8.3.1.4,BLADETYPE4-NETWORK-MIB::gatewayInfoStatus,INTEGER,read-only,,current,up(1):failed(2),The status of the default gateway.
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.3.8.4,BLADETYPE4-NETWORK-MIB::ipInfoBootpRelayState,INTEGER,read-only,,current,enabled(2):disabled(3),The state of BOOTP relay.
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.3.8.5,BLADETYPE4-NETWORK-MIB::ipInfoBootpRelayAddr,IpAddress,read-only,,current,,The IP address of BOOTP server.
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.3.8.6,BLADETYPE4-NETWORK-MIB::ipInfoBootpRelayAddr2,IpAddress,read-only,,current,,The IP address of second BOOTP server.
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.3.8.7,BLADETYPE4-NETWORK-MIB::ipInfoFwdState,INTEGER,read-only,,current,on(1):off(2),IP forwarding global state.
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.3.8.8,BLADETYPE4-NETWORK-MIB::ipInfoFwdDirectedBcast,INTEGER,read-only,,current,enabled(2):disabled(3),The state of forwarding directed broadcasts.
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.3.8.9,BLADETYPE4-NETWORK-MIB::ipInfoNwfTable,,not-accessible,,current,,The table of IP network filter information.
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.3.8.9.1,BLADETYPE4-NETWORK-MIB::ipInfoNwfEntry,,not-accessible,ipInfoNwfIndex,current,,A row in the IP network filter information table.
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.3.8.9.1.1,BLADETYPE4-NETWORK-MIB::ipInfoNwfIndex,Integer32,read-only,,current,,The netowrk filter number for which the NWF is related.
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.3.8.9.1.2,BLADETYPE4-NETWORK-MIB::ipInfoNwfAddr,IpAddress,read-only,,current,,The IP address of the network filter.
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.3.8.9.1.3,BLADETYPE4-NETWORK-MIB::ipInfoNwfMask,IpAddress,read-only,,current,,The IP network filter mask.
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.3.8.9.1.4,BLADETYPE4-NETWORK-MIB::ipInfoNwfState,INTEGER,read-only,,current,enabled(1):disabled(2),The state of the network filter.
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.3.8.10,BLADETYPE4-NETWORK-MIB::ipInfoRmapTable,,not-accessible,,current,,The table of IP route map information.
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.3.8.10.1,BLADETYPE4-NETWORK-MIB::ipInfoRmapEntry,,not-accessible,ipInfoRmapIndex,current,,Information about an IP route map.
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.3.8.10.1.1,BLADETYPE4-NETWORK-MIB::ipInfoRmapIndex,Integer32,read-only,,current,,The route map number for which the RMAP is related.
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.3.8.10.1.2,BLADETYPE4-NETWORK-MIB::ipInfoRmapLp,Unsigned32,read-only,,current,,The local-preference of the route map. 4294967295 means none
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.3.8.10.1.3,BLADETYPE4-NETWORK-MIB::ipInfoRmapMetric,Unsigned32,read-only,,current,,The metric of the route map. 4294967295 means none
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.3.8.10.1.4,BLADETYPE4-NETWORK-MIB::ipInfoRmapPrec,INTEGER,read-only,,current,,The precedence of the route map.
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.3.8.10.1.5,BLADETYPE4-NETWORK-MIB::ipInfoRmapWeight,INTEGER,read-only,,current,,The weight of the route map. 65535 means none
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.3.8.10.1.6,BLADETYPE4-NETWORK-MIB::ipInfoRmapState,INTEGER,read-only,,current,enabled(1):disabled(2),Enable or disable the route map.
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.3.8.10.1.7,BLADETYPE4-NETWORK-MIB::ipInfoRmapAp,OCTET,read-only,,current,,The as-path prepend of the matched route. Up to 3 AS number can be 
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.3.8.10.1.8,BLADETYPE4-NETWORK-MIB::ipInfoRmapMetricType,INTEGER,read-only,,current,none(1):type1(2):type2(3),The OSPF metric-type of the matched route.
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.3.8.11,BLADETYPE4-NETWORK-MIB::ipOspfInfo,,,,,,
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.3.8.11.1,BLADETYPE4-NETWORK-MIB::ipOspfInfoState,INTEGER,read-only,,current,on(1):off(2),OSPF global state.
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.3.8.11.2,BLADETYPE4-NETWORK-MIB::ipOspfInfoDefaultRouteMetric,INTEGER,read-only,,current,,The metric to be assigned.
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.3.8.11.3,BLADETYPE4-NETWORK-MIB::ipOspfInfoDefaultRouteMetricType,INTEGER,read-only,,current,none(1):type1(2):type2(3),The AS External metric type to be assigned.
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.3.8.11.4,BLADETYPE4-NETWORK-MIB::ipOspfInfoRouterID,IpAddress,read-only,,current,,The router ID of the switch.
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.3.8.11.5,BLADETYPE4-NETWORK-MIB::ipOspfInfoLsdbLimit,Integer32,read-only,,current,,The LSDB limit for external LSA.
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.3.8.11.6,BLADETYPE4-NETWORK-MIB::ipOspfAreaInfoTable,,not-accessible,,current,,The table of OSPF Area Information.
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.3.8.11.6.1,BLADETYPE4-NETWORK-MIB::ipOspfAreaInfoEntry,,not-accessible,ipOspfAreaInfoIndex:ipOspfAreaInfoId,current,,Information about a OSPF area.
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.3.8.11.6.1.1,BLADETYPE4-NETWORK-MIB::ipOspfAreaInfoIndex,Integer32,read-only,,current,,The OSPF area number for which the OSPF area table is related.
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.3.8.11.6.1.2,BLADETYPE4-NETWORK-MIB::ipOspfAreaInfoId,IpAddress,read-only,,current,,The IP Address of the OSPF area.
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.3.8.11.6.1.3,BLADETYPE4-NETWORK-MIB::ipOspfAreaInfoSpfInterval,INTEGER,read-only,,current,,The SPF interval for the OSPF area.
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.3.8.11.6.1.4,BLADETYPE4-NETWORK-MIB::ipOspfAreaInfoAuthType,INTEGER,read-only,,current,none(1):password(2):md5(3),Type of authentication being used.
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.3.8.11.6.1.5,BLADETYPE4-NETWORK-MIB::ipOspfAreaInfoType,INTEGER,read-only,,current,transit(0):stub(1):nssa(2),Type of Area.
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.3.8.11.6.1.6,BLADETYPE4-NETWORK-MIB::ipOspfAreaInfoMetric,INTEGER,read-only,,current,,Metric (1-65535)
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.3.8.11.6.1.7,BLADETYPE4-NETWORK-MIB::ipOspfAreaInfoStatus,INTEGER,read-only,,current,disabled(0):enabled(1),Status
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.3.8.11.7,BLADETYPE4-NETWORK-MIB::ipOspfRangeInfoTable,,not-accessible,,current,,The table of OSPF summary range information.
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.3.8.11.7.1,BLADETYPE4-NETWORK-MIB::ipOspfRangeInfoEntry,,not-accessible,ipOspfRangeInfoIndex,current,,Information about an OSPF summary range.
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.3.8.11.7.1.1,BLADETYPE4-NETWORK-MIB::ipOspfRangeInfoIndex,Integer32,read-only,,current,,The range number for which the OSPF summary range table is related.
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.3.8.11.7.1.2,BLADETYPE4-NETWORK-MIB::ipOspfRangeInfoAddr,IpAddress,read-only,,current,,The IP Address of the range.
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.3.8.11.7.1.3,BLADETYPE4-NETWORK-MIB::ipOspfRangeInfoMask,IpAddress,read-only,,current,,The mask of the range.
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.3.8.11.7.1.4,BLADETYPE4-NETWORK-MIB::ipOspfRangeInfoAreaIndex,Integer32,read-only,,current,,The area index.
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.3.8.11.7.1.5,BLADETYPE4-NETWORK-MIB::ipOspfRangeInfoHideState,INTEGER,read-only,,current,enabled(1):disabled(2),The state of the hide range.
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.3.8.11.7.1.6,BLADETYPE4-NETWORK-MIB::ipOspfRangeInfoState,INTEGER,read-only,,current,enabled(1):disabled(2),The state of the range.
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.3.8.11.8,BLADETYPE4-NETWORK-MIB::ipOspfIntfInfoTable,,not-accessible,,current,,The table of OSPF Interface Information.
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.3.8.11.8.1,BLADETYPE4-NETWORK-MIB::ipOspfIntfInfoEntry,,not-accessible,ipOspfIntfInfoIndex,current,,Information about an OSPF Interface.
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.3.8.11.8.1.1,BLADETYPE4-NETWORK-MIB::ipOspfIntfInfoIndex,Integer32,read-only,,current,,The OSPF Interface number for which the OSPF Interface table is related.
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.3.8.11.8.1.2,BLADETYPE4-NETWORK-MIB::ipOspfIntfInfoId,IpAddress,read-only,,current,,The IP Address of the OSPF interface.
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.3.8.11.8.1.3,BLADETYPE4-NETWORK-MIB::ipOspfIntfInfoArea,INTEGER,read-only,,current,,The index of the area that the interface belongs
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.3.8.11.8.1.4,BLADETYPE4-NETWORK-MIB::ipOspfIntfInfoMdkey,INTEGER,read-only,,current,,The MD5 key for the OSPF interface 0 (none) no MD5 authentication.
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.3.8.11.8.1.5,BLADETYPE4-NETWORK-MIB::ipOspfIntfInfoCost,INTEGER,read-only,,current,,Interface cost
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.3.8.11.8.1.6,BLADETYPE4-NETWORK-MIB::ipOspfIntfInfoPrio,INTEGER,read-only,,current,,Interface router priority
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.3.8.11.8.1.7,BLADETYPE4-NETWORK-MIB::ipOspfIntfInfoHello,INTEGER,read-only,,current,,Hello interval
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.3.8.11.8.1.9,BLADETYPE4-NETWORK-MIB::ipOspfIntfInfoDead,INTEGER,read-only,,current,,Dead interval
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.3.8.11.8.1.11,BLADETYPE4-NETWORK-MIB::ipOspfIntfInfoTrans,INTEGER,read-only,,current,,Transit delay
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.3.8.11.8.1.12,BLADETYPE4-NETWORK-MIB::ipOspfIntfInfoRetra,INTEGER,read-only,,current,,Retransmit interval
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.3.8.11.8.1.13,BLADETYPE4-NETWORK-MIB::ipOspfIntfInfoAuthKey,OCTET,read-only,,current,,Authentication Key
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.3.8.11.8.1.15,BLADETYPE4-NETWORK-MIB::ipOspfIntfInfoStatus,INTEGER,read-only,,current,disabled(0):enabled(1),Status of the interface enabled(1)
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.3.8.11.9,BLADETYPE4-NETWORK-MIB::ipOspfVirtIntfInfoTable,,not-accessible,,current,,The table of OSPF Virtual Interface Information.
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.3.8.11.9.1,BLADETYPE4-NETWORK-MIB::ipOspfVirtIntfInfoEntry,,not-accessible,ipOspfVirtIntfInfoIndex,current,,Information about an OSPF virtual Interface.
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.3.8.11.9.1.1,BLADETYPE4-NETWORK-MIB::ipOspfVirtIntfInfoIndex,Integer32,read-only,,current,,The OSPF Virtual Interface number for which the OSPF  Virtual Interface table is related.
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.3.8.11.9.1.2,BLADETYPE4-NETWORK-MIB::ipOspfVirtIntfInfoAreaId,INTEGER,read-only,,current,,The index of the OSPF area to which this virtual interface belongs.
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.3.8.11.9.1.3,BLADETYPE4-NETWORK-MIB::ipOspfVirtIntfInfoNbr,IpAddress,read-only,,current,,The IP Address of the OSPF neighbor for this virtual interface.
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.3.8.11.9.1.4,BLADETYPE4-NETWORK-MIB::ipOspfVirtIntfInfoMdkey,INTEGER,read-only,,current,,The MD5 key for the OSPF virtual interface 0 (none) no MD5 authentication.
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.3.8.11.9.1.5,BLADETYPE4-NETWORK-MIB::ipOspfVirtIntfInfoHello,INTEGER,read-only,,current,,Hello interval
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.3.8.11.9.1.7,BLADETYPE4-NETWORK-MIB::ipOspfVirtIntfInfoDead,INTEGER,read-only,,current,,Dead interval
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.3.8.11.9.1.9,BLADETYPE4-NETWORK-MIB::ipOspfVirtIntfInfoTrans,INTEGER,read-only,,current,,Transit delay
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.3.8.11.9.1.10,BLADETYPE4-NETWORK-MIB::ipOspfVirtIntfInfoRetra,INTEGER,read-only,,current,,Retransmit interval
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.3.8.11.9.1.11,BLADETYPE4-NETWORK-MIB::ipOspfVirtIntfInfoAuthKey,OCTET,read-only,,current,,Authentication Key
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.3.8.11.9.1.12,BLADETYPE4-NETWORK-MIB::ipOspfVirtIntfInfoStatus,INTEGER,read-only,,current,disabled(0):enabled(1),Status enabled(1)
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.3.8.11.10,BLADETYPE4-NETWORK-MIB::ipOspfHostInfoTable,,not-accessible,,current,,The table of OSPF Host Information.
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.3.8.11.10.1,BLADETYPE4-NETWORK-MIB::ipOspfHostInfoEntry,,not-accessible,ipOspfHostInfoIndex:ipOspfHostInfoIpAddr,current,,Information about a OSPF host.
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.3.8.11.10.1.1,BLADETYPE4-NETWORK-MIB::ipOspfHostInfoIndex,Integer32,read-only,,current,,The OSPF host number for which the OSPF host table is related.
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.3.8.11.10.1.2,BLADETYPE4-NETWORK-MIB::ipOspfHostInfoIpAddr,IpAddress,read-only,,current,,The IP Address of the OSPF host.
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.3.8.11.10.1.3,BLADETYPE4-NETWORK-MIB::ipOspfHostInfoAreaIndex,Integer32,read-only,,current,,The area index.
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.3.8.11.10.1.4,BLADETYPE4-NETWORK-MIB::ipOspfHostInfoCost,Integer32,read-only,,current,,The cost of the corresponding host.
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.3.8.11.10.1.5,BLADETYPE4-NETWORK-MIB::ipOspfHostInfoState,INTEGER,read-only,,current,enabled(2):disabled(3),Enable or disable an OSPF Host
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.3.8.11.11,BLADETYPE4-NETWORK-MIB::ipOspfRedistributeInfo,,,,,,
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.3.8.11.11.1,BLADETYPE4-NETWORK-MIB::ipOspfRedistributeStaticInfo,,,,,,
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.3.8.11.11.1.1,BLADETYPE4-NETWORK-MIB::ipOspfRedistributeStaticInfoMetric,INTEGER,read-only,,current,,The metric to be assigned to static routes.  A value of 0 indicates none.
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.3.8.11.11.1.2,BLADETYPE4-NETWORK-MIB::ipOspfRedistributeStaticInfoMetricType,INTEGER,read-only,,current,none(1):type1(2):type2(3),The AS External metric type for static routes.
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.3.8.11.11.1.3,BLADETYPE4-NETWORK-MIB::ipOspfRedistributeStaticInfoOutRmapList,OCTET,read-only,,current,,The route maps present in the out route map list.  The route maps are presented in a bitmap format. in receiving order: OCTET 1 OCTET 2 ..... xxxxxxxx xxxxxxxx ..... || || |_ Rmap 9 || || || ||___ Rmap 8 || |____ Rmap 7 || . . . ||_________ Rmap 2 |__________ Rmap 1 where x : 1 - The represented route map is selected 0 - The represented route map is not selected
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.3.8.11.11.2,BLADETYPE4-NETWORK-MIB::ipOspfRedistributeFixedInfo,,,,,,
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.3.8.11.11.2.1,BLADETYPE4-NETWORK-MIB::ipOspfRedistributeFixedInfoMetric,INTEGER,read-only,,current,,The export metric for fixed routes. A value of 0 indicates none
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.3.8.11.11.2.2,BLADETYPE4-NETWORK-MIB::ipOspfRedistributeFixedInfoMetricType,INTEGER,read-only,,current,none(1):type1(2):type2(3),The AS External metric type for fixed routes.
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.3.8.11.11.2.3,BLADETYPE4-NETWORK-MIB::ipOspfRedistributeFixedInfoOutRmapList,OCTET,read-only,,current,,The route maps present in the out route map list.  The route maps are presented in a bitmap format. in receiving order: OCTET 1 OCTET 2 ..... xxxxxxxx xxxxxxxx ..... || || |_ Rmap 9 || || || ||___ Rmap 8 || |____ Rmap 7 || . . . ||_________ Rmap 2 |__________ Rmap 1 where x : 1 - The represented route map is selected 0 - The represented route map is not selected
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.3.8.11.11.3,BLADETYPE4-NETWORK-MIB::ipOspfRedistributeRipInfo,,,,,,
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.3.8.11.11.3.1,BLADETYPE4-NETWORK-MIB::ipOspfRedistributeRipInfoMetric,INTEGER,read-only,,current,,The export metric for RIP routes. A value of 0 indicates none
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.3.8.11.11.3.2,BLADETYPE4-NETWORK-MIB::ipOspfRedistributeRipInfoMetricType,INTEGER,read-only,,current,none(1):type1(2):type2(3),The AS External metric type for RIP routes.
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.3.8.11.11.3.3,BLADETYPE4-NETWORK-MIB::ipOspfRedistributeRipInfoOutRmapList,OCTET,read-only,,current,,The route maps present in the out route map list.  The route maps are presented in a bitmap format. in receiving order: OCTET 1 OCTET 2 ..... xxxxxxxx xxxxxxxx ..... || || |_ Rmap 9 || || || ||___ Rmap 8 || |____ Rmap 7 || . . . ||_________ Rmap 2 |__________ Rmap 1 where x : 1 - The represented route map is selected 0 - The represented route map is not selected
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.3.8.11.12,BLADETYPE4-NETWORK-MIB::ipOspfMd5keyInfoTable,,not-accessible,,current,,The table of OSPF MD5 keys Information.
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.3.8.11.12.1,BLADETYPE4-NETWORK-MIB::ipOspfMd5keyInfoEntry,,not-accessible,ipOspfMd5keyInfoIndex,current,,Information about an OSPF MD keys table.
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.3.8.11.12.1.1,BLADETYPE4-NETWORK-MIB::ipOspfMd5keyInfoIndex,Integer32,read-only,,current,,The OSPF MD5 Key number for which the OSPF MdKey table is related.
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.3.8.11.12.1.2,BLADETYPE4-NETWORK-MIB::ipOspfMd5keyInfoKey,OCTET,read-only,,current,,The character string representing the MD5 Key.
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.3.15,BLADETYPE4-NETWORK-MIB::dhcpInfo,,,,,,
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.3.15.1,BLADETYPE4-NETWORK-MIB::dhcpInfoMacAddr,OCTET,read-only,,current,,The MAC address of the interface.
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.3.15.2,BLADETYPE4-NETWORK-MIB::dhcpInfoAddr,IpAddress,read-only,,current,,The IP address of the interface.
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.3.15.3,BLADETYPE4-NETWORK-MIB::dhcpInfoSubnetMask,IpAddress,read-only,,current,,The subnet mask of the interface.
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.3.15.4,BLADETYPE4-NETWORK-MIB::dhcpInfoDefaultGateway,IpAddress,read-only,,current,,The IP address of default gateway for the interface.
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.3.15.5,BLADETYPE4-NETWORK-MIB::dhcpInfoServer,IpAddress,read-only,,current,,The IP address of the DHCP server that leased the ip of the interface.
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.3.15.6,BLADETYPE4-NETWORK-MIB::dhcpInfoLeaseObtained,OCTET,read-only,,current,,The time and date when the lease was obtained .
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.3.15.7,BLADETYPE4-NETWORK-MIB::dhcpInfoLeaseExpires,OCTET,read-only,,current,,The time and date when the lease was obtained .
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.4,BLADETYPE4-NETWORK-MIB::layer3Oper,,,,,,
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.4.1,BLADETYPE4-NETWORK-MIB::vrrpOper,,,,,,
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.4.1.1,BLADETYPE4-NETWORK-MIB::vrrpOperVirtRtrTable,,not-accessible,,current,,An entry in the table of virtual routers.
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.4.1.1.1,BLADETYPE4-NETWORK-MIB::vrrpOperVirtRtrEntry,,not-accessible,vrrpOperVirtRtrIndex,current,,A row in the vrrpOperVirtRtrTable 
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.4.1.1.1.1,BLADETYPE4-NETWORK-MIB::vrrpOperVirtRtrIndex,Integer32,read-only,,current,,The index for the VRRP virtual router.
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.4.1.1.1.2,BLADETYPE4-NETWORK-MIB::vrrpOperVirtRtrBackup,INTEGER,read-write,,current,ok(1):backup(2),When set to a value of 'backup(2)' it forces the specified  master virtual router into backup mode. 'ok(1)' is returned when the object os read.
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.4.1.2,BLADETYPE4-NETWORK-MIB::vrrpOperVirtRtrGroupBackup,INTEGER,read-write,,current,ok(1):backup(2),When set to a value of 'backup(2)' it forces the specified  master virtual router group into backup mode. 'ok(1)' is returned when the object os read.
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.7,BLADETYPE4-NETWORK-MIB::traps,,,,,,
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.7.0,BLADETYPE4-NETWORK-MIB::traps#,,,,,,
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.7.0.2,BLADETYPE4-NETWORK-MIB::swDefGwUp,,,,,,A swDefGwUp trap signifies that the default gateway is alive.
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.7.0.3,BLADETYPE4-NETWORK-MIB::swDefGwDown,,,,,,A swDefGwDown trap signifies that the default gateway is down.
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.7.0.4,BLADETYPE4-NETWORK-MIB::swDefGwInService,,,,,,A swDefGwEnabled trap signifies that the default gateway is up and in service.
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.7.0.5,BLADETYPE4-NETWORK-MIB::swDefGwNotInService,,,,,,A swDefGwDisabled trap signifies that the default gateway is alive but not in service.
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.7.0.19,BLADETYPE4-NETWORK-MIB::swLoginFailure,,,,,,A swLoginFailure trap signifies that someone failed to enter a valid username/password combination.
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.7.0.22,BLADETYPE4-NETWORK-MIB::swTempExceedThreshold,,,,,,A swTempExceedThreshold trap signifies that the switch temperature has exceeded maximum safety limits.
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.7.0.25,BLADETYPE4-NETWORK-MIB::swValidLogin,,,,,,A swValidLogin trap signifies that a user login has occured.
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.7.0.27,BLADETYPE4-NETWORK-MIB::swApplyComplete,,,,,,A swApplyComplete signifies that new configuration
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.7.0.28,BLADETYPE4-NETWORK-MIB::swSaveComplete,,,,,,A swApplyComplete signifies that new configuration
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.7.0.29,BLADETYPE4-NETWORK-MIB::swFwDownloadSucess,,,,,,A swFwDownloadSuccess signifies that firmware
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.7.0.30,BLADETYPE4-NETWORK-MIB::swFwDownloadFailure,,,,,,A swFwDownloadFailure signifies that firmware 
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.7.0.31,BLADETYPE4-NETWORK-MIB::swTempReturnThreshold,,,,,,A swTempReturnThreshold trap signifies that the switch temperature has returned below maximum safety limits.
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.7.0.34,BLADETYPE4-NETWORK-MIB::swUfdfoLtMFailure,,,,,,A swUfdfoLtMFailure trap signifies that a LtM link is down.
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.7.0.35,BLADETYPE4-NETWORK-MIB::swUfdfoLtMUP,,,,,,A swUfdfoLtMUP trap signifies that a LtM link is up.
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.7.0.36,BLADETYPE4-NETWORK-MIB::swUfdfoGlobalEna,,,,,,A swUfdfoGlobalEna trap signifies that Global UFD is enabled.
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.7.0.37,BLADETYPE4-NETWORK-MIB::swUfdfoGlobalDis,,,,,,A swUfdfoGlobalDis trap signifies that Global UFD is disabled.
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.7.0.38,BLADETYPE4-NETWORK-MIB::swUfdfoLtDAutoEna,,,,,,A swUfdfoLtDAutoEna trap signifies that a LtD link is Auto Enabled.
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.7.0.39,BLADETYPE4-NETWORK-MIB::swUfdfoLtDAutoDis,,,,,,A swUfdfoLtDAutoDis trap signifies that a LtD link is Auto Disabled.
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.7.0.42,BLADETYPE4-NETWORK-MIB::swStgNewRoot,,,,,,A swStgNewRoot trap signifies that the bridge has become the new root of the STG.
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.7.0.43,BLADETYPE4-NETWORK-MIB::swCistNewRoot,,,,,,A swCistNewRoot trap signifies that the bridge has become the new root of the CIST.
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.7.0.44,BLADETYPE4-NETWORK-MIB::swStgTopologyChanged,,,,,,A swStgTopologyChanged trap signifies that there was a STG topology change.
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.7.0.45,BLADETYPE4-NETWORK-MIB::swCistTopologyChanged,,,,,,A swCistTopologyChanged trap signifies that there was a CIST topology change.
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.7.0.51,BLADETYPE4-NETWORK-MIB::sfpInserted,,,,,,A sfpInserted trap signifies that a SFP is inserted.
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.7.0.52,BLADETYPE4-NETWORK-MIB::sfpRemoved,,,,,,A sfpRemoved trap signifies that a SFP is removed.
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.7.0.61,BLADETYPE4-NETWORK-MIB::swNtpNotServer,,,,,,A altSwNtpNotServer trap is sent when cannot contact primary or secondary Ntp server.
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.7.0.62,BLADETYPE4-NETWORK-MIB::swNtpUpdateClock,,,,,,A altSwNtpUpdateClock trap is sent when received Ntp update.
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.7.0.63,BLADETYPE4-NETWORK-MIB::swValidLogout,,,,,,A altSwValidLogout trap signifies that a user logout has occured.
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.7.1000,BLADETYPE4-NETWORK-MIB::swTrapDisplayString,OCTET,read-only,,current,,Temporary string object used to store information being sent in a Switch trap.
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.8,BLADETYPE4-NETWORK-MIB::qos,,,,,,
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.8.1,BLADETYPE4-NETWORK-MIB::qosConfigs,,,,,,
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.8.1.1,BLADETYPE4-NETWORK-MIB::qos8021p,,,,,,
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.8.1.1.1,BLADETYPE4-NETWORK-MIB::qosCurCfgPortPriorityTable,,not-accessible,,current,,The table of QOS Port Priority configuration.
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.8.1.1.1.1,BLADETYPE4-NETWORK-MIB::qosCurCfgPortPriorityEntry,,not-accessible,qosCurCfgPortIndex,current,,Information about a particular QOS Port Priority configuration.
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.8.1.1.1.1.1,BLADETYPE4-NETWORK-MIB::qosCurCfgPortIndex,Unsigned32,read-only,,current,,Switch Port Number
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.8.1.1.1.1.2,BLADETYPE4-NETWORK-MIB::qosCurCfgPortPriority,INTEGER,read-only,,current,,Switch Port Priority Should be between 0 and 7
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.8.1.1.2,BLADETYPE4-NETWORK-MIB::qosNewCfgPortPriorityTable,,not-accessible,,current,,The table of QOS Port Priority configuration.
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.8.1.1.2.1,BLADETYPE4-NETWORK-MIB::qosNewCfgPortPriorityEntry,,not-accessible,qosNewCfgPortIndex,current,,Information about a particular QOS Port Priority configuration.
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.8.1.1.2.1.1,BLADETYPE4-NETWORK-MIB::qosNewCfgPortIndex,Unsigned32,read-only,,current,,Switch Port Number
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.8.1.1.2.1.2,BLADETYPE4-NETWORK-MIB::qosNewCfgPortPriority,INTEGER,read-write,,current,,Switch Port Priority Should be between 0 and 7
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.8.1.1.3,BLADETYPE4-NETWORK-MIB::qosCurCfgPriorityCoSTable,,not-accessible,,current,,The table of Frame Priority and COSq configuration.
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.8.1.1.3.1,BLADETYPE4-NETWORK-MIB::qosCurCfgPriorityCoSEntry,,not-accessible,qosCurCfgPriorityIndex,current,,Information about a particular Frame Priority and COSq configuration.
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.8.1.1.3.1.1,BLADETYPE4-NETWORK-MIB::qosCurCfgPriorityIndex,INTEGER,read-only,,current,,Frame priority Number
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.8.1.1.3.1.2,BLADETYPE4-NETWORK-MIB::qosCurCfgPriorityCoSq,INTEGER,read-only,,current,,CoSq for a Frame Priority Should be between 0 and 7
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.8.1.1.4,BLADETYPE4-NETWORK-MIB::qosNewCfgPriorityCoSTable,,not-accessible,,current,,The table of Frame Priority and COSq configuration.
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.8.1.1.4.1,BLADETYPE4-NETWORK-MIB::qosNewCfgPriorityCoSEntry,,not-accessible,qosNewCfgPriorityIndex,current,,Information about a particular Frame Priority and COSq configuration.
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.8.1.1.4.1.1,BLADETYPE4-NETWORK-MIB::qosNewCfgPriorityIndex,INTEGER,read-only,,current,,Frame priority Number
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.8.1.1.4.1.2,BLADETYPE4-NETWORK-MIB::qosNewCfgPriorityCoSq,INTEGER,read-write,,current,,CoSq for a Frame Priority Should be between 0 and 7
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.8.1.1.5,BLADETYPE4-NETWORK-MIB::qosCurCfgCosWeightTable,,not-accessible,,current,,The table of CoSq and Weight configuration.
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.8.1.1.5.1,BLADETYPE4-NETWORK-MIB::qosCurCfgCosWeightEntry,,not-accessible,qosCurCfgCosIndex,current,,Information about a particular CoSq and Weight configuration.
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.8.1.1.5.1.1,BLADETYPE4-NETWORK-MIB::qosCurCfgCosIndex,INTEGER,read-only,,current,,CoSq Number
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.8.1.1.5.1.2,BLADETYPE4-NETWORK-MIB::qosCurCfgCosWeight,INTEGER,read-only,,current,,Weight of CoSq
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.8.1.1.6,BLADETYPE4-NETWORK-MIB::qosNewCfgCosWeightTable,,not-accessible,,current,,The table of CoSq and Weight configuration.
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.8.1.1.6.1,BLADETYPE4-NETWORK-MIB::qosNewCfgCosWeightEntry,,not-accessible,qosNewCfgCosIndex,current,,Information about a particular CoSq and Weight configuration.
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.8.1.1.6.1.1,BLADETYPE4-NETWORK-MIB::qosNewCfgCosIndex,INTEGER,read-only,,current,,CoSq Number
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.8.1.1.6.1.2,BLADETYPE4-NETWORK-MIB::qosNewCfgCosWeight,INTEGER,read-write,,current,,Weight of CoSq
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.8.1.1.9,BLADETYPE4-NETWORK-MIB::qosDefaultCfg,INTEGER,read-write,,current,none(0):defaultWeight(2):defaultPriority(3),Load default configuration.
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.9,BLADETYPE4-NETWORK-MIB::acl,,,,,,
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.9.1,BLADETYPE4-NETWORK-MIB::acConfig,,,,,,
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.9.1.1,BLADETYPE4-NETWORK-MIB::acList,,,,,,
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.9.1.1.1,BLADETYPE4-NETWORK-MIB::aclCurCfgTable,,not-accessible,,current,,The table of current ACL configuration.
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.9.1.1.1.1,BLADETYPE4-NETWORK-MIB::aclCurCfgEntry,,not-accessible,aclCurCfgIndex,current,,Current information about a particular ACL configuration entry.
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.9.1.1.1.1.1,BLADETYPE4-NETWORK-MIB::aclCurCfgIndex,Unsigned32,not-accessible,,current,,The index associated with this ACL entry.
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.9.1.1.1.1.3,BLADETYPE4-NETWORK-MIB::aclCurCfgGroup,Unsigned32,read-only,,current,,The index of the ACL group to which this ACL entry is a member of. A value of zero means the ACL is not a member of any group.
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.9.1.1.1.1.4,BLADETYPE4-NETWORK-MIB::aclCurCfgFilterAction,INTEGER,read-only,,current,none(0):permit(1):deny(2):setprio(3),The action to be performed on a packet that matches the filter settings of this ACL entry.
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.9.1.1.1.1.5,BLADETYPE4-NETWORK-MIB::aclCurCfgFilterActionSetPrio,INTEGER,read-only,,current,none(0):prio0(1):prio1(2):prio2(3):prio3(4):prio4(5):prio5(6):prio6(7):prio7(8),The value to be used when the action to be performed is setprio for this ACL entry.
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.9.1.1.1.1.6,BLADETYPE4-NETWORK-MIB::aclCurCfgEthFmt,INTEGER,read-only,,current,none(0):ethernet2(1):snap(2):llc(3):ieee802dot3(4),The packet ethernet format to be filtered.
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.9.1.1.1.1.7,BLADETYPE4-NETWORK-MIB::aclCurCfgTagFmt,INTEGER,read-only,,current,disabled(1):any(2):untagged(3):tagged(4),The packet tag format to be filtered.
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.9.1.1.1.1.8,BLADETYPE4-NETWORK-MIB::aclCurCfgIPFmt,INTEGER,read-only,,current,none(1):ipv4(2):ipv6(3),The packet IP format to be filtered.
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.9.1.1.1.1.9,BLADETYPE4-NETWORK-MIB::aclCurCfgSrcMACAddress,OCTET,read-only,,current,,The source MAC address to be filtered.
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.9.1.1.1.1.10,BLADETYPE4-NETWORK-MIB::aclCurCfgSrcMACMask,OCTET,read-only,,current,,The address mask applied to aclCurCfgSrcMACAddress for filtering.
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.9.1.1.1.1.11,BLADETYPE4-NETWORK-MIB::aclCurCfgDstMACAddress,OCTET,read-only,,current,,The destination MAC address to be filtered.
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.9.1.1.1.1.12,BLADETYPE4-NETWORK-MIB::aclCurCfgDstMACMask,OCTET,read-only,,current,,The address mask applied to aclCurCfgDstMACAddress for filtering.
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.9.1.1.1.1.13,BLADETYPE4-NETWORK-MIB::aclCurCfgEthernetTypeName,INTEGER,read-only,,current,none(0):arp(1):ipv4(2):ipv6(3):mpls(4):rarp(5):any(6):other(7),The Ethernet type to be filtered. If the value of this object is other(7), the value of aclNewCfgEthernetTypeValue indicates the ethernet type that will be filtered.
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.9.1.1.1.1.14,BLADETYPE4-NETWORK-MIB::aclCurCfgEthernetTypeValue,INTEGER,read-only,,current,,The Ethernet type value to be filtered. The value of this object is equivalent to the value of aclNewCfgEthernetTypeName except when the value of aclNewCfgEthernetTypeName is other(7), which can be any user-defined value for this object.
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.9.1.1.1.1.15,BLADETYPE4-NETWORK-MIB::aclCurCfgVLanId,INTEGER,read-only,,current,,The virtual LAN identifier to be filtered.
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.9.1.1.1.1.16,BLADETYPE4-NETWORK-MIB::aclCurCfgVLanMask,OCTET,read-only,,current,,The mask applied to aclCurCfgVLanId for filtering.
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.9.1.1.1.1.17,BLADETYPE4-NETWORK-MIB::aclCurCfg8021pPriority,INTEGER,read-only,,current,none(0):priority0(1):priority1(2):priority2(3):priority3(4):priority4(5):priority5(6):priority6(7):priority7(8),The 802.1p priority to be filtered.
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.9.1.1.1.1.18,BLADETYPE4-NETWORK-MIB::aclCurCfgTypeOfService,OCTET,read-only,,current,,The type of service to be filtered.
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.9.1.1.1.1.19,BLADETYPE4-NETWORK-MIB::aclCurCfgProtocol,OCTET,read-only,,current,,The protocol to be filtered.
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.9.1.1.1.1.20,BLADETYPE4-NETWORK-MIB::aclCurCfgSrcIPAddress,IpAddress,read-only,,current,,The source IP address to be filtered.
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.9.1.1.1.1.21,BLADETYPE4-NETWORK-MIB::aclCurCfgSrcIPMask,IpAddress,read-only,,current,,The address mask applied to aclCurCfgSrcIPAddress for filtering.
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.9.1.1.1.1.22,BLADETYPE4-NETWORK-MIB::aclCurCfgDstIPAddress,IpAddress,read-only,,current,,The destination IP address to be filtered.
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.9.1.1.1.1.23,BLADETYPE4-NETWORK-MIB::aclCurCfgDstIPMask,IpAddress,read-only,,current,,The address mask applied to aclCurCfgDstIPAddress for filtering.
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.9.1.1.1.1.24,BLADETYPE4-NETWORK-MIB::aclCurCfgSrcPort,INTEGER,read-only,,current,,The source TCP/UDP port number to be filtered.
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.9.1.1.1.1.25,BLADETYPE4-NETWORK-MIB::aclCurCfgSrcPortMask,OCTET,read-only,,current,,The mask applied to aclCurCfgSrcPort for filtering.
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.9.1.1.1.1.26,BLADETYPE4-NETWORK-MIB::aclCurCfgDstPort,INTEGER,read-only,,current,,The destination TCP/UDP port number to be filtered.
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.9.1.1.1.1.27,BLADETYPE4-NETWORK-MIB::aclCurCfgDstPortMask,OCTET,read-only,,current,,The mask applied to aclCurCfgDstPort for filtering.
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.9.1.1.1.1.28,BLADETYPE4-NETWORK-MIB::aclCurCfgTCPFlags,BITS,read-only,,current,reserved1(0):reserved2(1):tcpURG(2):tcpACK(3):tcpPSH(4):tcpRST(5):tcpSYN(6):tcpFIN(7),The TCP flags to be filtered. OCTET xxxxxxxx ||||..|| ||||..||_tcpFIN(7) ||||..|__tcpSYN(6) |||| ||||_____tcpACK(3) |||______tcpURG(2) ||_______reserved2(1) |________reserved1(0) where: - reserved1 - 0; - reserved2 - 0; - x - 0 or 1; 
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.9.1.1.1.1.29,BLADETYPE4-NETWORK-MIB::aclCurCfgEgressPorts,OCTET,read-only,,current,,The port list in the ACL configured for egress filtering. The ports are presented in bitmap format, as follows: OCTET 1 OCTET 2 ..... xxxxxxxx xxxxxxxx ..... || || | || || |_ port 9 || || || ||___ port 8 || |____ port 7 || . . . ||_________ port 2 |__________ port 1 where x: 1 - the represented port is configured for filtering. 0 - the represented port is not configured for filtering.
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.9.1.1.1.1.30,BLADETYPE4-NETWORK-MIB::aclCurCfgStatistics,INTEGER,read-only,,current,disable(0):enable(1),Whether statistics collection for this ACL is enabled or not.
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.9.1.1.1.1.39,BLADETYPE4-NETWORK-MIB::aclCurCfgTCPFlagsMask,BITS,read-only,,current,reserved1(0):reserved2(1):tcpURG(2):tcpACK(3):tcpPSH(4):tcpRST(5):tcpSYN(6):tcpFIN(7),The TCP flags mask. OCTET xxxxxxxx ||||..|| ||||..||_tcpFIN(7) ||||..|__tcpSYN(6) |||| ||||_____tcpACK(3) |||______tcpURG(2) ||_______reserved2(1) |________reserved1(0) where: - reserved1 - 0; - reserved2 - 0; - x - 0 or 1; 
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.9.1.1.1.1.41,BLADETYPE4-NETWORK-MIB::aclCurCfgMeterAction,INTEGER,read-only,,current,unconfigured(0):outdrop(1):outpass(2),Meter Action for this ACL.
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.9.1.1.1.1.42,BLADETYPE4-NETWORK-MIB::aclCurCfgMeterEnable,INTEGER,read-only,,current,enabled(0):disabled(1),Meter state for this ACL.
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.9.1.1.1.1.43,BLADETYPE4-NETWORK-MIB::aclCurCfgKbitsSec,Unsigned32,read-only,,current,,The commited rate of meter associated with this ACL entry.
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.9.1.1.1.1.44,BLADETYPE4-NETWORK-MIB::aclCurCfgKbitsBurst,INTEGER,read-only,,current,kbits32(32):kbits64(64):kbits128(128):kbits256(256):kbits512(512):kbits1024(1024):kbits2048(2048):kbits4096(4096),The maxmium burst sizeof meter associated with this ACL entry.
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.9.1.1.1.1.45,BLADETYPE4-NETWORK-MIB::aclCurCfgUser,INTEGER,read-only,,current,,Set user defined priority for this ACL.
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.9.1.1.1.1.46,BLADETYPE4-NETWORK-MIB::aclCurCfgInprofDscp,INTEGER,read-only,,current,,Set in profile pkts DSCP value.
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.9.1.1.1.1.47,BLADETYPE4-NETWORK-MIB::aclCurCfgTos,INTEGER,read-only,,current,disable(0):enable(1),To enable/disable setting pkts based on TOS bits.
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.9.1.1.1.1.48,BLADETYPE4-NETWORK-MIB::aclCurCfgOutprofDscp,INTEGER,read-only,,current,,Set out profile pkts DSCP value.
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.9.1.1.1.1.49,BLADETYPE4-NETWORK-MIB::aclCurCfgUserEnable,INTEGER,read-only,,current,disabled(0):userdefined(1),Set update method for this ACL.
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.9.1.1.1.1.50,BLADETYPE4-NETWORK-MIB::aclCurCfgInprofDscpEnable,INTEGER,read-only,,current,disable(0):enable(1),Whether in profile update DSCP for this ACL is enabled or not.
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.9.1.1.1.1.51,BLADETYPE4-NETWORK-MIB::aclCurCfgOutprofDscpEnable,INTEGER,read-only,,current,disable(0):enable(1),Whether out profile update DSCP for this ACL is enabled or not.
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.9.1.1.2,BLADETYPE4-NETWORK-MIB::aclNewCfgTable,,not-accessible,,current,,The table of new ACL configuration.
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.9.1.1.2.1,BLADETYPE4-NETWORK-MIB::aclNewCfgEntry,,not-accessible,aclNewCfgIndex,current,,New information about a particular ACL configuration.
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.9.1.1.2.1.1,BLADETYPE4-NETWORK-MIB::aclNewCfgIndex,Unsigned32,read-only,,current,,The index associated with this ACL entry.
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.9.1.1.2.1.3,BLADETYPE4-NETWORK-MIB::aclNewCfgGroup,Unsigned32,read-only,,current,,The index of the ACL group to which this ACL entry is a member of. A value of zero means the ACL is not a member of any group.
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.9.1.1.2.1.4,BLADETYPE4-NETWORK-MIB::aclNewCfgFilterAction,INTEGER,read-write,,current,none(0):permit(1):deny(2):setprio(3),The action to be performed on a packet that matches the filter settings of this ACL entry.
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.9.1.1.2.1.5,BLADETYPE4-NETWORK-MIB::aclNewCfgFilterActionSetPrio,INTEGER,read-write,,current,none(0):prio0(1):prio1(2):prio2(3):prio3(4):prio4(5):prio5(6):prio6(7):prio7(8),The COS queue to be used when the action for this ACL entry is set to setprio.
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.9.1.1.2.1.6,BLADETYPE4-NETWORK-MIB::aclNewCfgEthFmt,INTEGER,read-write,,current,none(0):ethernet2(1):snap(2):llc(3),The packet ethernet format to be filtered.
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.9.1.1.2.1.7,BLADETYPE4-NETWORK-MIB::aclNewCfgTagFmt,INTEGER,read-write,,current,disabled(1):any(2):none(3):tagged(4),The packet tagging format to be filtered.
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.9.1.1.2.1.8,BLADETYPE4-NETWORK-MIB::aclNewCfgIPFmt,INTEGER,read-write,,current,none(1):ipv4(2):ipv6(3),The packet IP format to be filtered.
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.9.1.1.2.1.9,BLADETYPE4-NETWORK-MIB::aclNewCfgSrcMACAddress,OCTET,read-write,,current,,The source MAC address to be filtered. Whenever this object is set to a nonzero value, the aclNewCfgSrcMACMask object, if not yet set, will be automatically set to ff:ff:ff:ff:ff:ff.
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.9.1.1.2.1.10,BLADETYPE4-NETWORK-MIB::aclNewCfgSrcMACMask,OCTET,read-write,,current,,The address mask to be applied to aclNewCfgSrcMACAddress for filtering.
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.9.1.1.2.1.11,BLADETYPE4-NETWORK-MIB::aclNewCfgDstMACAddress,OCTET,read-write,,current,,The destination MAC address to be filtered. Whenever this object is set to a nonzero value, the aclNewCfgDstMACMask object, if not yet set, will be automatically set to ff:ff:ff:ff:ff:ff.
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.9.1.1.2.1.12,BLADETYPE4-NETWORK-MIB::aclNewCfgDstMACMask,OCTET,read-write,,current,,The address mask to be applied to aclNewCfgDstMACAddress for filtering.
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.9.1.1.2.1.13,BLADETYPE4-NETWORK-MIB::aclNewCfgEthernetTypeName,INTEGER,read-write,,current,none(0):arp(1):ipv4(2):ipv6(3):mpls(4):rarp(5):any(6):other(7),The Ethernet type to be filtered. If the value of this object is other(7), the value of aclNewCfgEthernetTypeValue indicates the ethernet type that will be filtered. If this object is set to a value other than other(7), the value of the aclNewCfgEthernetTypeValue object is automatically set, as follows: aclNewCfgEthernetTypeName aclNewCfgEthernetTypeValue none(0) 0 arp(1) 2054 (0x0806) ipv4(2) 2048 (0x0800) ipv6(3) 34525 (0x86dd) mpls(4) 34887 (0x8847) rarp(5) 32821 (0x8035) any(6) 65535 (0xffff) 
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.9.1.1.2.1.14,BLADETYPE4-NETWORK-MIB::aclNewCfgEthernetTypeValue,INTEGER,read-write,,current,,The Ethernet type value to be filtered. The value of this object is equivalent to the value of aclNewCfgEthernetTypeName except when the value of aclNewCfgEthernetTypeName is other(7), which can be any user-defined value for this object.
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.9.1.1.2.1.15,BLADETYPE4-NETWORK-MIB::aclNewCfgVLanId,INTEGER,read-write,,current,,The virtual LAN identifier to be filtered. Whenever this object is set to a nonzero value, the aclNewCfgVLanMask object, if not yet set, will be automatically set to 4095 (0xfff). When this object is set to 0, the Vlan ACL filter is disabled.
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.9.1.1.2.1.16,BLADETYPE4-NETWORK-MIB::aclNewCfgVLanMask,OCTET,read-write,,current,,The mask to be applied to aclNewCfgVLanId for filtering.
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.9.1.1.2.1.17,BLADETYPE4-NETWORK-MIB::aclNewCfg8021pPriority,INTEGER,read-write,,current,none(0):priority0(1):priority1(2):priority2(3):priority3(4):priority4(5):priority5(6):priority6(7):priority7(8),The 802.1p priority to be filtered.
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.9.1.1.2.1.18,BLADETYPE4-NETWORK-MIB::aclNewCfgTypeOfService,OCTET,read-write,,current,,The type of service to be filtered.
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.9.1.1.2.1.19,BLADETYPE4-NETWORK-MIB::aclNewCfgProtocol,OCTET,read-write,,current,,The protocol to be filtered.
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.9.1.1.2.1.20,BLADETYPE4-NETWORK-MIB::aclNewCfgSrcIPAddress,IpAddress,read-write,,current,,The source IP address to be filtered. Whenever this object is set to a nonzero value, the aclNewCfgSrcIPMask object, if not yet set, will be automatically set to 255.255.255.255.
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.9.1.1.2.1.21,BLADETYPE4-NETWORK-MIB::aclNewCfgSrcIPMask,IpAddress,read-write,,current,,The address mask to be applied to aclNewCfgSrcIPAddress for filtering.
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.9.1.1.2.1.22,BLADETYPE4-NETWORK-MIB::aclNewCfgDstIPAddress,IpAddress,read-write,,current,,The destination IP address to be filtered. Whenever this object is set to a nonzero value, the aclNewCfgDstIPMask object, if not yet set, will be automatically set to 255.255.255.255.
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.9.1.1.2.1.23,BLADETYPE4-NETWORK-MIB::aclNewCfgDstIPMask,IpAddress,read-write,,current,,The address mask to be applied to aclNewCfgDstIPAddress for filtering.
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.9.1.1.2.1.24,BLADETYPE4-NETWORK-MIB::aclNewCfgSrcPort,INTEGER,read-write,,current,,The source TCP/UDP port number to be filtered. Whenever this object is set if the aclNewCfgSrcPortMask object is not set will be automatically set to 65535 (0xffff).
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.9.1.1.2.1.25,BLADETYPE4-NETWORK-MIB::aclNewCfgSrcPortMask,OCTET,read-write,,current,,The mask to be applied to aclNewCfgSrcPort for filtering.
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.9.1.1.2.1.26,BLADETYPE4-NETWORK-MIB::aclNewCfgDstPort,INTEGER,read-write,,current,,The destination TCP/UDP port number to be filtered. Whenever this object is set the aclNewCfgSrcPortMask object, if not yet set, will  be automatically set to 65535 (0xffff).
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.9.1.1.2.1.27,BLADETYPE4-NETWORK-MIB::aclNewCfgDstPortMask,OCTET,read-write,,current,,The mask to be applied to aclNewCfgDstPort for filtering.
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.9.1.1.2.1.28,BLADETYPE4-NETWORK-MIB::aclNewCfgTCPFlags,BITS,read-write,,current,reserved1(0):reserved2(1):tcpURG(2):tcpACK(3):tcpPSH(4):tcpRST(5):tcpSYN(6):tcpFIN(7),The TCP flags to be filtered. The TCP flags are presented in bitmap format, as follows: OCTET xxxxxxxx ||||..|| ||||..||_tcpFIN(7) ||||..|__tcpSYN(6) |||| ||||_____tcpACK(3) |||______tcpURG(2) ||_______reserved2(1) |________reserved1(0) where: - reserved1 - 0; - reserved2 - 0; - x - 0 or 1; 
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.9.1.1.2.1.29,BLADETYPE4-NETWORK-MIB::aclNewCfgEgressPorts,OCTET,read-only,,current,,The port list in the ACL configured for egress filtering. The ports are presented in bitmap format, as follows: OCTET 1 OCTET 2 ..... xxxxxxxx xxxxxxxx ..... || || | || || |_ port 9 || || || ||___ port 8 || |____ port 7 || . . . ||_________ port 2 |__________ port 1 where x: 1 - the represented port is configured for filtering. 0 - the represented port is not configured for filtering.
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.9.1.1.2.1.30,BLADETYPE4-NETWORK-MIB::aclNewCfgStatistics,INTEGER,read-write,,current,disable(0):enable(1),Whether statistics collection for this ACL is enabled or not.
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.9.1.1.2.1.31,BLADETYPE4-NETWORK-MIB::aclNewCfgAddEgressPort,Unsigned32,read-write,,current,,The port to be added to the specified ACL for egress filtering. A value of zero is always returned when this object is read.
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.9.1.1.2.1.32,BLADETYPE4-NETWORK-MIB::aclNewCfgRemoveEgressPort,Unsigned32,read-write,,current,,The port to be removed from the specified ACL. A value of zero is always returned when this object is read.
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.9.1.1.2.1.33,BLADETYPE4-NETWORK-MIB::aclNewCfgDelete,INTEGER,read-write,,current,other(1):delete(2),This is an action object to delete an ACL entry. A value of other(1) is always returned when this object is read.
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.9.1.1.2.1.39,BLADETYPE4-NETWORK-MIB::aclNewCfgTCPFlagsMask,BITS,read-write,,current,reserved1(0):reserved2(1):tcpURG(2):tcpACK(3):tcpPSH(4):tcpRST(5):tcpSYN(6):tcpFIN(7),The TCP flags mask. The TCP flags are presented in bitmap format, as follows: OCTET xxxxxxxx ||||..|| ||||..||_tcpFIN(7) ||||..|__tcpSYN(6) |||| ||||_____tcpACK(3) |||______tcpURG(2) ||_______reserved2(1) |________reserved1(0) where: - reserved1 - 0; - reserved2 - 0; - x - 0 or 1; Default value is 0x3f.
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.9.1.1.2.1.41,BLADETYPE4-NETWORK-MIB::aclNewCfgMeterAction,INTEGER,read-write,,current,unconfigured(0):outdrop(1):outpass(2),Meter Action for this ACL.
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.9.1.1.2.1.42,BLADETYPE4-NETWORK-MIB::aclNewCfgMeterEnable,INTEGER,read-write,,current,enabled(0):disabled(1),Meter state for this ACL.
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.9.1.1.2.1.43,BLADETYPE4-NETWORK-MIB::aclNewCfgKbitsSec,Unsigned32,read-write,,current,,The commited rate of meter associated with this ACL entry.
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.9.1.1.2.1.44,BLADETYPE4-NETWORK-MIB::aclNewCfgKbitsBurst,INTEGER,read-write,,current,kbits32(32):kbits64(64):kbits128(128):kbits256(256):kbits512(512):kbits1024(1024):kbits2048(2048):kbits4096(4096),The maximum burst size of the meter associated with this ACL entry.
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.9.1.1.2.1.45,BLADETYPE4-NETWORK-MIB::aclNewCfgUser,INTEGER,read-write,,current,,Set user defined priority for this ACL.
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.9.1.1.2.1.46,BLADETYPE4-NETWORK-MIB::aclNewCfgInprofDscp,INTEGER,read-write,,current,,Set in profile pkts DSCP value.
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.9.1.1.2.1.47,BLADETYPE4-NETWORK-MIB::aclNewCfgTos,INTEGER,read-write,,current,disable(0):enable(1),To enable/disable setting pkts based on TOS bits.
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.9.1.1.2.1.48,BLADETYPE4-NETWORK-MIB::aclNewCfgOutprofDscp,INTEGER,read-write,,current,,Set out profile pkts DSCP value.
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.9.1.1.2.1.49,BLADETYPE4-NETWORK-MIB::aclNewCfgUserEnable,INTEGER,read-write,,current,disabled(0):userdefined(1),Set update method for this ACL.
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.9.1.1.2.1.50,BLADETYPE4-NETWORK-MIB::aclNewCfgInprofDscpEnable,INTEGER,read-write,,current,disable(0):enable(1),Whether in profile update DSCP for this ACL is enabled or not. Only the value disable(0) can be set, causing the in profile update DSCP to be disabled for this ACL. The value enable(1) is automatically set when setting a value for aclNewCfgInprofDscp object.
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.9.1.1.2.1.51,BLADETYPE4-NETWORK-MIB::aclNewCfgOutprofDscpEnable,INTEGER,read-write,,current,disable(0):enable(1),Whether out profile update DSCP for this ACL is enabled or not. Only the value disable(0) can be set, causing the out profile update DSCP to be disabled for this ACL. The value enable(1) is automatically set when setting a value for aclNewCfgOutprofDscp object.
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.9.1.1.2.1.53,BLADETYPE4-NETWORK-MIB::aclNewCfgReset,INTEGER,read-write,,current,other(1):reset(2),This is an action object to reset an ACL entry. A value of other(1) is always returned when this object is read.
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.9.1.1.2.1.54,BLADETYPE4-NETWORK-MIB::aclNewCfgEthernetReset,INTEGER,read-write,,current,other(1):reset(2),This is an action object to reset an ACL Ethernet entry. A value of other(1) is always returned when this object is read.
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.9.1.1.2.1.55,BLADETYPE4-NETWORK-MIB::aclNewCfgIpv4Reset,INTEGER,read-write,,current,other(1):reset(2),This is an action object to reset an ACL IPV4 entry. A value of other(1) is always returned when this object is read.
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.9.1.1.2.1.56,BLADETYPE4-NETWORK-MIB::aclNewCfgTcpudpReset,INTEGER,read-write,,current,other(1):reset(2),This is an action object to reset an ACL Tcpudp entry. A value of other(1) is always returned when this object is read.
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.9.1.1.2.1.57,BLADETYPE4-NETWORK-MIB::aclNewCfgMeterReset,INTEGER,read-write,,current,other(1):reset(2),This is an action object to reset an ACL Meter entry. A value of other(1) is always returned when this object is read.
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.9.1.1.2.1.58,BLADETYPE4-NETWORK-MIB::aclNewCfgRemarkReset,INTEGER,read-write,,current,other(1):reset(2),This is an action object to reset an ACL Remark entry. A value of other(1) is always returned when this object is read.
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.9.1.1.2.1.59,BLADETYPE4-NETWORK-MIB::aclNewCfgRemarkInprofReset,INTEGER,read-write,,current,other(1):reset(2),This is an action object to reset an ACL Remark Inprof entry. A value of other(1) is always returned when this object is read.
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.9.1.1.2.1.60,BLADETYPE4-NETWORK-MIB::aclNewCfgRemarkOutprofReset,INTEGER,read-write,,current,other(1):reset(2),This is an action object to reset an ACL Remark Outprof entry. A value of other(1) is always returned when this object is read.
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.9.1.1.2.1.61,BLADETYPE4-NETWORK-MIB::aclNewCfgPktfmtReset,INTEGER,read-write,,current,other(1):reset(2),This is an action object to reset an ACL Pktfmt entry. A value of other(1) is always returned when this object is read.
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.9.1.3,BLADETYPE4-NETWORK-MIB::aclGroup,,,,,,
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.9.1.3.1,BLADETYPE4-NETWORK-MIB::aclGroupCurCfgTable,,not-accessible,,current,,The table of current ACL Group configuration.
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.9.1.3.1.1,BLADETYPE4-NETWORK-MIB::aclGroupCurCfgEntry,,not-accessible,aclGroupCurCfgIndex,current,,Information about a particular ACL configuration.
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.9.1.3.1.1.1,BLADETYPE4-NETWORK-MIB::aclGroupCurCfgIndex,Unsigned32,read-only,,current,,The index associated with this ACL Group entry.
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.9.1.3.1.1.2,BLADETYPE4-NETWORK-MIB::aclGroupCurCfgMemberAcls,OCTET,read-only,,current,,The ACL members of this ACL group, presented in bitmap format, as follows: OCTET 1 OCTET 2 ..... xxxxxxxx xxxxxxxx ..... || || | || || |_ ACL 9 || || || ||___ ACL 8 || |____ ACL 7 || . . . ||_________ ACL 2 |__________ ACL 1 where x: 1 - the represented ACL is a member of the group. 0 - the represented ACL is not a member of the group.
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.9.1.3.2,BLADETYPE4-NETWORK-MIB::aclGroupNewCfgTable,,not-accessible,,current,,The table of new ACL Group configuration.
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.9.1.3.2.1,BLADETYPE4-NETWORK-MIB::aclGroupNewCfgEntry,,not-accessible,aclGroupNewCfgIndex,current,,New information about a particular ACL configuration.
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.9.1.3.2.1.1,BLADETYPE4-NETWORK-MIB::aclGroupNewCfgIndex,Unsigned32,read-only,,current,,The index associated with this ACL Group entry.
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.9.1.3.2.1.2,BLADETYPE4-NETWORK-MIB::aclGroupNewCfgMemberAcls,OCTET,read-only,,current,,The ACL members of this ACL group, presented in bitmap format, as follows: OCTET 1 OCTET 2 ..... xxxxxxxx xxxxxxxx ..... || || | || || |_ ACL 9 || || || ||___ ACL 8 || |____ ACL 7 || . . . ||_________ ACL 2 |__________ ACL 1 where x: 1 - the represented ACL is a member of the group. 0 - the represented ACL is not a member of the group.
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.9.1.3.2.1.4,BLADETYPE4-NETWORK-MIB::aclGroupNewCfgAddAcl,Unsigned32,read-write,,current,,The index of the ACL entry to be added into this ACL group. A successful set operation on this object will also set the bit corresponding to the ACL entry in the aclGroupNewCfgMemberAcls bitmap. A value of zero is always returned when this object is read.
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.9.1.3.2.1.5,BLADETYPE4-NETWORK-MIB::aclGroupNewCfgRemoveAcl,Unsigned32,read-write,,current,,The index of the ACL entry to be removed from this ACL group. A successful set operation on this object will unset the bit corresponding to the ACL entry in the aclGroupNewCfgMemberAcls bitmap. A value of zero is always returned when this object is read.
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.9.1.3.2.1.8,BLADETYPE4-NETWORK-MIB::aclGroupNewCfgDelete,INTEGER,read-write,,current,other(1):delete(2),This is an action object to delete an ACL group. A value of other(1) is always returned when this object is read.
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.9.1.4,BLADETYPE4-NETWORK-MIB::aclCfg,,,,,,
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.9.1.4.1,BLADETYPE4-NETWORK-MIB::aclCurCfgPortTable,,not-accessible,,current,,The table of port acl groups configuration.
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.9.1.4.1.1,BLADETYPE4-NETWORK-MIB::aclCurCfgPortTableEntry,,not-accessible,aclCurCfgPortIndex,current,,Information about a particular port acl configuration.
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.9.1.4.1.1.1,BLADETYPE4-NETWORK-MIB::aclCurCfgPortIndex,Unsigned32,read-only,,current,,The identifier of a particular port. This is also index to the entLogicalTable of Entity MIB.
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.9.1.4.1.1.2,BLADETYPE4-NETWORK-MIB::aclCurCfgPortAclBmap,OCTET,read-only,,current,,The acls applied to the port. The acls are presented in bitmap format. This string displays acl number from 1 to 896. in receiving order: OCTET 1 OCTET 2 ..... xxxxxxxx xxxxxxxx ..... || || |_ acl 9 || || || ||___ acl 8 || |____ acl 7 || . . . ||_________ acl 2 |__________ acl 1 where x : 1 - The represented acl applied to the port. 0 - The represented acl not applied to the port.
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.9.1.4.1.1.4,BLADETYPE4-NETWORK-MIB::aclCurCfgPortAclGrpBmap,OCTET,read-only,,current,,The acl groups applied to the port. The acls are presented in bitmap format. This string displays acl number from 1 to 896. in receiving order: OCTET 1 OCTET 2 ..... xxxxxxxx xxxxxxxx ..... || || |_ aclgrp 9 || || || ||___ aclgrp 8 || |____ aclgrp 7 || . . . ||_________ aclgrp 2 |__________ aclgrp 1 where x : 1 - The represented acl applied to the port. 0 - The represented acl not applied to the port.
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.9.1.4.2,BLADETYPE4-NETWORK-MIB::aclNewCfgPortTable,,not-accessible,,current,,The table of port acl configuration.
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.9.1.4.2.1,BLADETYPE4-NETWORK-MIB::aclNewCfgPortTableEntry,,not-accessible,aclNewCfgPortIndex,current,,Information about a particular port acl groups configuration.
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.9.1.4.2.1.1,BLADETYPE4-NETWORK-MIB::aclNewCfgPortIndex,Unsigned32,read-only,,current,,The identifier of a particular port. This is also index to the entLogicalTable of Entity MIB.
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.9.1.4.2.1.2,BLADETYPE4-NETWORK-MIB::aclNewCfgPortAddAcl,Unsigned32,read-write,,current,,The acl to be added to the specified port. A '0' value is returned when read.
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.9.1.4.2.1.4,BLADETYPE4-NETWORK-MIB::aclNewCfgPortAddAclGrp,Unsigned32,read-write,,current,,The acl group to be added to the specified port. A '0' value is returned when read.
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.9.1.4.2.1.5,BLADETYPE4-NETWORK-MIB::aclNewCfgPortRemoveAcl,Unsigned32,read-write,,current,,The acl to be removed from the specified port. A '0' value is returned when read.
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.9.1.4.2.1.7,BLADETYPE4-NETWORK-MIB::aclNewCfgPortRemoveAclGrp,Unsigned32,read-write,,current,,The acl group to be removed from the specified port. A '0' value is returned when read.
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.9.1.4.2.1.8,BLADETYPE4-NETWORK-MIB::aclNewCfgPortAclBmap,OCTET,read-only,,current,,The acls applied to the port. The acls are presented in bitmap format. This string displays acl number from 1 to 896. in receiving order: OCTET 1 OCTET 2 ..... xxxxxxxx xxxxxxxx ..... || || |_ acl 9 || || || ||___ acl 8 || |____ acl 7 || . . . ||_________ acl 2 |__________ acl 1 where x : 1 - The represented acl applied to the port. 0 - The represented acl not applied to the port.
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.9.1.4.2.1.10,BLADETYPE4-NETWORK-MIB::aclNewCfgPortAclGrpBmap,OCTET,read-only,,current,,The acl groups applied to the port. The acl groups are presented in bitmap format. This string displays group number from 1 to 4096. in receiving order: OCTET 1 OCTET 2 ..... xxxxxxxx xxxxxxxx ..... || || |_ aclgrp 9 || || || ||___ aclgrp 8 || |____ aclgrp 7 || . . . ||_________ aclgrp 2 |__________ aclgrp 1 where x : 1 - The represented acl group applied to the port. 0 - The represented acl group not applied to the port.
.1.3.6.1.4.1.11.2.3.7.11.33.5,HP-SWITCH-PL-MIB::hpSwitchModuleBladetype5,,,,,,
.1.3.6.1.4.1.11.2.3.7.11.33.5.1,HP-SWITCH-PL-MIB::hpSwitchBladeType5-Products,,,,,,
.1.3.6.1.4.1.11.2.3.7.11.33.5.2,HP-SWITCH-PL-MIB::hpSwitchBladeType5-Mgmt,,,,,,
.1.3.6.1.4.1.11.2.3.7.11.33.6,HP-SWITCH-PL-MIB::hpSwitchModuleBladetype6,,,,,,
.1.3.6.1.4.1.11.2.3.7.11.33.6.1,HP-SWITCH-PL-MIB::hpSwitchBladeType6-Products,,,,,,
.1.3.6.1.4.1.11.2.3.7.11.33.6.2,HP-SWITCH-PL-MIB::hpSwitchBladeType6-Mgmt,,,,,,
.1.3.6.1.4.1.11.2.3.7.11.33.7,HP-SWITCH-PL-MIB::hpSwitchModuleBladetype7,,,,,,
.1.3.6.1.4.1.11.2.3.7.11.33.7.1,HP-SWITCH-PL-MIB::hpSwitchBladeType7-Products,,,,,,
.1.3.6.1.4.1.11.2.3.7.11.33.7.2,HP-SWITCH-PL-MIB::hpSwitchBladeType7-Mgmt,,,,,,
.1.3.6.1.4.1.11.2.3.7.11.33.9,HP-SWITCH-PL-MIB::hpSwitchModuleBladetype9,,,,,,
.1.3.6.1.4.1.11.2.3.7.11.33.9.1,HP-SWITCH-PL-MIB::hpSwitchBladeType9-Products,,,,,,
.1.3.6.1.4.1.11.2.3.7.11.33.9.2,HP-SWITCH-PL-MIB::hpSwitchBladeType9-Mgmt,,,,,,
.1.3.6.1.4.1.11.2.3.7.11.34,HP-ICF-OID::hpSwitchJ4900A,,,,,,The authoritative identifier for the J4900A HP 2626 Switch.
.1.3.6.1.4.1.11.2.3.7.11.34.1,HP-ICF-OID::hpSwitchModuleJ4900A,,,,,,The authoritative identifier for the J4900A HP 2626 24-port 10/100-T + 2-port Gig module.
.1.3.6.1.4.1.11.2.3.7.11.35,HP-ICF-OID::hpSwitchJ8165A,,,,,,The authoritative identifier for the J8165A HP 2650-PWR Switch.
.1.3.6.1.4.1.11.2.3.7.11.35.1,HP-ICF-OID::hpSwitchModuleJ8165A,,,,,,The authoritative identifier for the J8165A HP 2650-PWR 48-port 10/100-T + 2-port Gig module.
.1.3.6.1.4.1.11.2.3.7.11.36,HP-ICF-OID::hpSwitchJ8164A,,,,,,The authoritative identifier for the J8164A HP 2626-PWR Switch.
.1.3.6.1.4.1.11.2.3.7.11.36.1,HP-ICF-OID::hpSwitchModuleJ8164A,,,,,,The authoritative identifier for the J8164A HP 2626-PWR 24-port 10/100-T + 2-port Gig module.
.1.3.6.1.4.1.11.2.3.7.11.37,HP-ICF-OID::hpSwitchJ8130A,,,,,,The authoritative identifier for the HP J8130A Wireless Access Point AP420WL.
.1.3.6.1.4.1.11.2.3.7.11.37.1,HP-PROCURVE-420-PRIVATE-MIB::enterpriseApSys,,,,,,
.1.3.6.1.4.1.11.2.3.7.11.37.1.1,HP-PROCURVE-420-PRIVATE-MIB::swHardwareVer,OCTET,read-only,,mandatory,,Hardware version of the main board.
.1.3.6.1.4.1.11.2.3.7.11.37.1.2,HP-PROCURVE-420-PRIVATE-MIB::swBootRomVer,OCTET,read-only,,mandatory,,Boot ROM code version of the main board.
.1.3.6.1.4.1.11.2.3.7.11.37.1.3,HP-PROCURVE-420-PRIVATE-MIB::swOpCodeVer,OCTET,read-only,,mandatory,,Operation code version of the main board.
.1.3.6.1.4.1.11.2.3.7.11.37.1.4,HP-PROCURVE-420-PRIVATE-MIB::UY-URUGUAY,,OCTET,read-write,,mandatory,,Country code of the AP. 
.1.3.6.1.4.1.11.2.3.7.11.37.2,HP-PROCURVE-420-PRIVATE-MIB::enterpriseApLineMgnt,,,,,,
.1.3.6.1.4.1.11.2.3.7.11.37.2.1,HP-PROCURVE-420-PRIVATE-MIB::lineTable,,not-accessible,,mandatory,,Table of descriptive and status information about configuration of each RS-232 line in this system
.1.3.6.1.4.1.11.2.3.7.11.37.2.1.1,HP-PROCURVE-420-PRIVATE-MIB::lineEntry,,not-accessible,lineIndex,mandatory,,An entry in the table, containing information about configuration in one RS232 line of the Access Point.
.1.3.6.1.4.1.11.2.3.7.11.37.2.1.1.1,HP-PROCURVE-420-PRIVATE-MIB::lineIndex,Integer32,not-accessible,,mandatory,,This is defined as RS-232 index.
.1.3.6.1.4.1.11.2.3.7.11.37.2.1.1.2,HP-PROCURVE-420-PRIVATE-MIB::lineDataBits,Integer32,read-only,,mandatory,,This is defined as number of data bits for the RS232 interface.
.1.3.6.1.4.1.11.2.3.7.11.37.2.1.1.3,HP-PROCURVE-420-PRIVATE-MIB::lineParity,INTEGER,read-only,,mandatory,none(99):odd(1):even(2),This is defined as parity of the RS232 interface.
.1.3.6.1.4.1.11.2.3.7.11.37.2.1.1.4,HP-PROCURVE-420-PRIVATE-MIB::lineSpeed,Integer32,read-only,,mandatory,,This is defined as the speed of the RS-232 interface.
.1.3.6.1.4.1.11.2.3.7.11.37.2.1.1.5,HP-PROCURVE-420-PRIVATE-MIB::lineStopBits,Integer32,read-only,,mandatory,,This is defined as the number of stop bits for the RS-232 interface.
.1.3.6.1.4.1.11.2.3.7.11.37.3,HP-PROCURVE-420-PRIVATE-MIB::enterpriseApPortMgnt,,,,,,
.1.3.6.1.4.1.11.2.3.7.11.37.3.1,HP-PROCURVE-420-PRIVATE-MIB::portTable,,not-accessible,,mandatory,,Table of descriptive and status information about configuration of each switch port (including expansion slot) in this system. This table also contains information about each trunk (similar to Cisco's EtherChannel).
.1.3.6.1.4.1.11.2.3.7.11.37.3.1.1,HP-PROCURVE-420-PRIVATE-MIB::portEntry,,not-accessible,portIndex,mandatory,,An entry in the table, containing information about configuration in one switch port of the switch.
.1.3.6.1.4.1.11.2.3.7.11.37.3.1.1.1,HP-PROCURVE-420-PRIVATE-MIB::portIndex,Integer32,not-accessible,,mandatory,,This is defined as ifIndex in the IF-MIB.
.1.3.6.1.4.1.11.2.3.7.11.37.3.1.1.2,HP-PROCURVE-420-PRIVATE-MIB::portName,OCTET,read-only,,mandatory,,Indicates the port name. This is same as  ifAlias in the IF-MIB (RFC2863 or later).
.1.3.6.1.4.1.11.2.3.7.11.37.3.1.1.3,HP-PROCURVE-420-PRIVATE-MIB::portType,INTEGER,read-only,,mandatory,other(1):hundredBaseTX(2):hundredBaseFX(3):thousandBaseSX(4):thousandBaseLX(5):thousandBaseT(6):thousandBaseGBIC(7):thousandBaseMiniGBIC(8),Indicates the port type.
.1.3.6.1.4.1.11.2.3.7.11.37.3.1.1.4,HP-PROCURVE-420-PRIVATE-MIB::portSpeedDpxCfg,INTEGER,read-only,,mandatory,auto(1):halfDuplex10(2):fullDuplex10(3):halfDuplex100(4):fullDuplex100(5):halfDuplex1000(6):fullDuplex1000(7),Set the port speed and duplex mode as follows: halfDuplex10(2) - 10Mbps and half duplex mode fullDuplex10(3) - 10Mbps and full duplex mode halfDuplex100(4) - 100Mbps and half duplex mode fullDuplex100(5) - 100Mbps and full duplex mode halfDuplex1000(6) - 1000Mbps and half duplex mode fullDuplex1000(7) - 1000Mbps and full duplex mode hundredBaseTX port can be set as halfDuplex10(2) fullDuplex10(3) halfDuplex100(4) fullDuplex100(5) hundredBaseFX port can be set as halfDuplex100(4) fullDuplex100(5) thousandBaseSX port can be set as halfDuplex1000(6) fullDuplex1000(7) The actual operating speed and duplex of the port is given by portSpeedDpxStatus.
.1.3.6.1.4.1.11.2.3.7.11.37.3.1.1.5,HP-PROCURVE-420-PRIVATE-MIB::portFlowCtrlCfg,INTEGER,read-only,,mandatory,enabled(1):disabled(2):backPressure(3):dot3xFlowControl(4),(1) Flow control mechanism is enabled. If the port type is hundredBaseTX or thousandBaseSX: When the port is operating in halfDuplex mode, the port uses backPressure flow control mechanism. When the port is operating in fullDuplex mode, the port uses IEEE 802.3x flow control mechanism. If the port type is hundredBaseFX: When the port is operating in halfDuplex mode, the port uses backPressure flow control mechanism. When the port is operating in fullDuplex mode, Flow control mechanism will not function. (2) Flow control mechanism is disabled. (3) Flow control mechanism is backPressure. when the port is in fullDuplex mode.This flow control mechanism will not function. (4) Flow control mechanism is IEEE 802.3x flow control. when the port is in halfDuplex mode.This flow control mechanism will not function. hundredBaseTX and thousandBaseSX port can be set as: enabled(1), disabled(2), backPressure(3), dot3xFlowControl(4). hundredBaseFX port can be set as: enabled(1), disabled(2), backPressure(3). The actual flow control mechanism is used given by portFlowCtrlStatus.
.1.3.6.1.4.1.11.2.3.7.11.37.3.1.1.6,HP-PROCURVE-420-PRIVATE-MIB::portCapabilities,INTEGER,read-only,,mandatory,portCap10half(99):portCap10full(1):portCap100half(2):portCap100full(3):portCap1000half(4):portCap1000full(5):reserved6(6):reserved7(7):reserved8(8):reserved9(9):reserved10(10):reserved11(11):reserved12(12):reserved13(13):portCapSym(14):portCapFlowCtrl(15),Port capabilities.
.1.3.6.1.4.1.11.2.3.7.11.37.3.1.1.7,HP-PROCURVE-420-PRIVATE-MIB::portAutonegotiation,INTEGER,read-only,,mandatory,enabled(1):disabled(2),Whether autonegotiation is enabled.
.1.3.6.1.4.1.11.2.3.7.11.37.3.1.1.8,HP-PROCURVE-420-PRIVATE-MIB::portSpeedDpxStatus,INTEGER,read-only,,mandatory,error(1):halfDuplex10(2):fullDuplex10(3):halfDuplex100(4):fullDuplex100(5):halfDuplex1000(6):fullDuplex1000(7),The operating speed and duplex mode of the switched port. If this index is a trunk, the speed is the speed of its individual members. If this index is a trunk and the result is inconsistent among its member ports, this value is error(1).
.1.3.6.1.4.1.11.2.3.7.11.37.3.1.1.9,HP-PROCURVE-420-PRIVATE-MIB::portFlowCtrlStatus,INTEGER,read-only,,mandatory,error(1):backPressure(2):dot3xFlowControl(3):none(4),(2) BackPressure flow control machanism is used. (3) IEEE 802.3 flow control machanism is used. (4) Flow control mechanism is disabled. If this index is a trunk and the result is inconsistent among its member ports, this value is error(1).
.1.3.6.1.4.1.11.2.3.7.11.37.4,HP-PROCURVE-420-PRIVATE-MIB::enterpriseApFileTransferMgt,,,,,,
.1.3.6.1.4.1.11.2.3.7.11.37.4.1,HP-PROCURVE-420-PRIVATE-MIB::transferStart,INTEGER,read-write,,mandatory,go(1):nogo(2),Set to go(1) to start a transfer.
.1.3.6.1.4.1.11.2.3.7.11.37.4.2,HP-PROCURVE-420-PRIVATE-MIB::transferType,INTEGER,read-write,,mandatory,ftp(1):tftp(2),Type of file to transfer.
.1.3.6.1.4.1.11.2.3.7.11.37.4.3,HP-PROCURVE-420-PRIVATE-MIB::fileType,INTEGER,read-write,,mandatory,opcode(1):config(2),Type of file to transfer.
.1.3.6.1.4.1.11.2.3.7.11.37.4.4,HP-PROCURVE-420-PRIVATE-MIB::srcFile,OCTET,read-write,,mandatory,,The source file name for TFTP transfer when a transfer is next requested via this MIB. This value is set to the zero length string when no file name has been specified.
.1.3.6.1.4.1.11.2.3.7.11.37.4.5,HP-PROCURVE-420-PRIVATE-MIB::destFile,OCTET,read-write,,mandatory,,The destination file name for TFTP transfer when a transfer is next requested via this MIB. This value is set to the zero length string when no file name has been specified.
.1.3.6.1.4.1.11.2.3.7.11.37.4.6,HP-PROCURVE-420-PRIVATE-MIB::fileServer,IpAddress,read-write,,mandatory,,The IP address of the TFTP server for transfer when a download is next requested via this MIB. This value is set to `0.0.0.0' when no IP address has been specified.
.1.3.6.1.4.1.11.2.3.7.11.37.4.7,HP-PROCURVE-420-PRIVATE-MIB::userName,OCTET,read-write,,mandatory,,The username specified for an FTP Transfer.
.1.3.6.1.4.1.11.2.3.7.11.37.4.8,HP-PROCURVE-420-PRIVATE-MIB::password,OCTET,read-write,,mandatory,,The password specified for an FTP Transfer.
.1.3.6.1.4.1.11.2.3.7.11.37.5,HP-PROCURVE-420-PRIVATE-MIB::enterpriseApResetMgt,,,,,,
.1.3.6.1.4.1.11.2.3.7.11.37.5.1,HP-PROCURVE-420-PRIVATE-MIB::restartOpCodeFile,OCTET,read-write,,mandatory,,Name of op-code file for start-up.
.1.3.6.1.4.1.11.2.3.7.11.37.5.2,HP-PROCURVE-420-PRIVATE-MIB::restartControl,INTEGER,read-write,,mandatory,running(1):warmBoot(2):coldBoot(3),Setting this object to warmBoot(2) causes the device to restart the application software with current configuration parameters saved in non-volatile memory. Setting this object to coldBoot(3) causes the device to reinitialize configuration parameters in non-volatile memory to default values and restart the application software. When the device is running normally, this variable has a value of running(1).
.1.3.6.1.4.1.11.2.3.7.11.37.6,HP-PROCURVE-420-PRIVATE-MIB::enterpriseApIpMgt,,,,,,
.1.3.6.1.4.1.11.2.3.7.11.37.6.1,HP-PROCURVE-420-PRIVATE-MIB::netConfigIPAddress,IpAddress,read-write,,mandatory,,The IP address of this Net interface. The default value for this object is 0.0.0.0. If either the netConfigIPAddress or netConfigSubnetMask are 0.0.0.0, then when the device boots, it may use DHCP to try to figure out what these values should be. If DHCP fails, before the device can talk on the network, this value must be configured (e.g., through a terminal attached to the device).
.1.3.6.1.4.1.11.2.3.7.11.37.6.2,HP-PROCURVE-420-PRIVATE-MIB::netConfigSubnetMask,IpAddress,read-write,,mandatory,,The subnet mask of this Net interface. The default value for this object is 0.0.0.0. If either the netConfigIPAddress or netConfigSubnetMask are 0.0.0.0, then when the device boots, it may use DHCP to try to figure out what these values should be. If DHCP fails, before the device can talk on the network, this value must be configured (e.g., through a terminal attached to the device).
.1.3.6.1.4.1.11.2.3.7.11.37.6.3,HP-PROCURVE-420-PRIVATE-MIB::netDefaultGateway,IpAddress,read-write,,mandatory,,The IP Address of the default gateway. If this value is undefined or unknown, it shall have the value 0.0.0.0.
.1.3.6.1.4.1.11.2.3.7.11.37.6.4,HP-PROCURVE-420-PRIVATE-MIB::ipHttpState,INTEGER,read-write,,mandatory,enabled(1):disabled(2),Whether HTTP is enabled.
.1.3.6.1.4.1.11.2.3.7.11.37.6.5,HP-PROCURVE-420-PRIVATE-MIB::ipHttpPort,INTEGER,read-write,,mandatory,,The port number for HTTP.
.1.3.6.1.4.1.11.2.3.7.11.37.7,HP-PROCURVE-420-PRIVATE-MIB::enterpriseAPdot11,,,,,,
.1.3.6.1.4.1.11.2.3.7.11.37.7.1,HP-PROCURVE-420-PRIVATE-MIB::hpdot11StationConfigTable,,not-accessible,,mandatory,,Table of descriptive and status information about configuration of each radio of the AP.
.1.3.6.1.4.1.11.2.3.7.11.37.7.1.1,HP-PROCURVE-420-PRIVATE-MIB::hpdot11StationConfigEntry,,not-accessible,hpdot11portIndex,mandatory,,An entry in the table, containing information about configuration in one radio of the AP.
.1.3.6.1.4.1.11.2.3.7.11.37.7.1.1.1,HP-PROCURVE-420-PRIVATE-MIB::hpdot11portIndex,Integer32,not-accessible,,mandatory,,Radio index of the AP.
.1.3.6.1.4.1.11.2.3.7.11.37.7.1.1.2,HP-PROCURVE-420-PRIVATE-MIB::hpdot11DesiredSSID,OCTET,read-write,,mandatory,,This attribute reflects the Service Set ID used in the DesiredSSID parameter of the most recent MLME_Scan.request. This value may be modified by an external management entity and used by the local SME to make decisions about the Scanning process.
.1.3.6.1.4.1.11.2.3.7.11.37.7.1.1.3,HP-PROCURVE-420-PRIVATE-MIB::hpdot11BeaconPeriod,INTEGER,read-write,,mandatory,,This attribute shall specify the number of ms that a station shall use for scheduling Beacon transmissions. This value is transmitted in Beacon and Probe Response frames.
.1.3.6.1.4.1.11.2.3.7.11.37.7.1.1.4,HP-PROCURVE-420-PRIVATE-MIB::hpdot11DTIMPeriod,INTEGER,read-write,,mandatory,,This attribute shall specify the number of beacon intervals that shall elapse between transmission of Beacons frames containing a TIM element whose DTIM Count field is 0. This value is transmitted in the DTIM Period field of Beacon frames.
.1.3.6.1.4.1.11.2.3.7.11.37.7.1.1.5,HP-PROCURVE-420-PRIVATE-MIB::hpdot11OperationalRateSet,INTEGER,read-write,,mandatory,,This attribute shall specify the set of data rates at which the station may transmit data. Each octet contains a value representing a rate. Each rate shall be within the range from 2 to 127, corresponding to data rates in increments of 500 kb/s from 1 Mbit/s to 63.5 Mbit/s, and shall be supported (as indicated in the supported rates table) for receiving data. This value is reported in transmitted Beacon, Probe Request, Probe Response, Association Request, Association Response, Reassociation Request, and Reassociation Response frames, and is used to determine whether a BSS with which the station desires to synchronize is suitable. It is also used when starting a BSS, as specified in 10.3.
.1.3.6.1.4.1.11.2.3.7.11.37.7.1.1.6,HP-PROCURVE-420-PRIVATE-MIB::hpdot11AuthenticationAlgorithm,INTEGER,read-write,,mandatory,openSystem(1):sharedKey(2),This attribute shall be a set of all the authentication algorithms supported by the STAs. The following are the default values and the associated algorithm. Value = 1: Open System Value = 2: Shared Key
.1.3.6.1.4.1.11.2.3.7.11.37.7.2,HP-PROCURVE-420-PRIVATE-MIB::hpdot11PrivacyTable,,not-accessible,,mandatory,,Table of descriptive and status information about configuration of each radio of the AP.
.1.3.6.1.4.1.11.2.3.7.11.37.7.2.1,HP-PROCURVE-420-PRIVATE-MIB::hpdot11PrivacyEntry,,not-accessible,hpdot11PrivacyportIndex,mandatory,,An entry in the table, containing information about configuration in one radio of the AP.
.1.3.6.1.4.1.11.2.3.7.11.37.7.2.1.1,HP-PROCURVE-420-PRIVATE-MIB::hpdot11PrivacyportIndex,Integer32,not-accessible,,mandatory,,Radio index of the AP.
.1.3.6.1.4.1.11.2.3.7.11.37.7.2.1.2,HP-PROCURVE-420-PRIVATE-MIB::hpdot11PrivacyInvoked,INTEGER,read-write,,mandatory,true(1):false(2),When this attribute is true, it shall indicate that the IEEE 802.11 WEP mechanism is used for transmitting frames of type Data. The default value of this attribute shall be false.
.1.3.6.1.4.1.11.2.3.7.11.37.7.2.1.3,HP-PROCURVE-420-PRIVATE-MIB::hpdot11WEPDefaultKeyID,INTEGER,read-write,,mandatory,,This attribute shall indicate the use of the first, second, or third element of the WEPDefaultKeys array when set to values of zero, one, or two(the  fourth are reserved for dynamic key). The default value of this attribute shall be 0.
.1.3.6.1.4.1.11.2.3.7.11.37.7.2.1.4,HP-PROCURVE-420-PRIVATE-MIB::hpdot11WEPKeyMappingLength,INTEGER,read-write,,mandatory,,The maximum number of tuples that dot11WEPKeyMappings can hold.
.1.3.6.1.4.1.11.2.3.7.11.37.7.3,HP-PROCURVE-420-PRIVATE-MIB::hpdot11mac,,,,,,
.1.3.6.1.4.1.11.2.3.7.11.37.7.3.1,HP-PROCURVE-420-PRIVATE-MIB::hpdot11OperationTable,,not-accessible,,mandatory,,Table of descriptive and status information about configuration of each radio of the AP.
.1.3.6.1.4.1.11.2.3.7.11.37.7.3.1.1,HP-PROCURVE-420-PRIVATE-MIB::hpdot11OperationEntry,,not-accessible,hpdot11OperationIndex,mandatory,,An entry in the table, containing information about configuration in one radio of the AP.
.1.3.6.1.4.1.11.2.3.7.11.37.7.3.1.1.1,HP-PROCURVE-420-PRIVATE-MIB::hpdot11OperationIndex,Integer32,not-accessible,,mandatory,,Radio index of the AP.
.1.3.6.1.4.1.11.2.3.7.11.37.7.3.1.1.2,HP-PROCURVE-420-PRIVATE-MIB::hpdot11RTSThreshold,INTEGER,read-write,,mandatory,,This attribute shall indicate the number of octets in an MPDU, below which an RTS/CTS handshake shall not be performed. An RTS/CTS handshake shall be performed at the beginning of any frame exchange sequence where the MPDU is of type Data or Management, the MPDU has an individual address in the Address1 field, and the length of the MPDU is greater than this threshold. (For additional details, refer to Table 21 in 9.7.) Setting this attribute to be larger than the maximum MSDU size shall have the effect of turning off the RTS/CTS handshake for frames of Data or Management type transmitted by this STA. Setting this attribute to zero shall have the effect of turning on the RTS/CTS handshake for all frames of Data or Management type transmitted by this STA. The default value of this attribute shall be 2347.
.1.3.6.1.4.1.11.2.3.7.11.37.7.3.1.1.3,HP-PROCURVE-420-PRIVATE-MIB::hpdot11FragmentationThreshold,INTEGER,read-write,,mandatory,,This attribute shall specify the mandatory maximum size, in octets, of the MPDU that may be delivered to the PHY. An MSDU shall be broken into fragments if its size exceeds the value of this attribute after adding MAC headers and trailers. An MSDU or MMPDU shall be fragmented when the resulting frame has an individual address in the Address1 field, and the length of the frame is larger than this threshold. The default value for this attribute shall be the lesser of 2346 or the aMPDUMaxLength of the attached PHY and shall never exceed the lesser of 2346 or the aMPDUMaxLength of the attached PHY. The value of this attribute shall never be less than 256.
.1.3.6.1.4.1.11.2.3.7.11.37.7.4,HP-PROCURVE-420-PRIVATE-MIB::hpdot11phy,,,,,,
.1.3.6.1.4.1.11.2.3.7.11.37.7.4.1,HP-PROCURVE-420-PRIVATE-MIB::hpdot11PhyOperationTable,,not-accessible,,mandatory,,Table of descriptive and status information about configuration of each radio of the AP.
.1.3.6.1.4.1.11.2.3.7.11.37.7.4.1.1,HP-PROCURVE-420-PRIVATE-MIB::hpdot11PhyOperationEntry,,not-accessible,hpdot11Index,mandatory,,An entry in the table, containing information about configuration in one radio of the AP.
.1.3.6.1.4.1.11.2.3.7.11.37.7.4.1.1.1,HP-PROCURVE-420-PRIVATE-MIB::hpdot11Index,Integer32,not-accessible,,mandatory,,Radio index of the AP.
.1.3.6.1.4.1.11.2.3.7.11.37.7.4.1.1.2,HP-PROCURVE-420-PRIVATE-MIB::hpdot11CurrentChannel,INTEGER,read-write,,mandatory,,The current operating frequency channel of the network
.1.3.6.1.4.1.11.2.3.7.11.37.7.4.1.1.3,HP-PROCURVE-420-PRIVATE-MIB::hpdot11TurboModeEnabled,INTEGER,read-only,,mandatory,none(99):on(1):off(2),This attribute, when true, shall indicate that the  propietory turbo mode option is enabled. The default value of this attribute shall be false.
.1.3.6.1.4.1.11.2.3.7.11.37.7.4.1.1.4,HP-PROCURVE-420-PRIVATE-MIB::hpdot11PreambleLength,INTEGER,read-write,,mandatory,short(1):long(2),This attribute determines whether or not a short or a long preamble is used to delineate 802.11 frames.
.1.3.6.1.4.1.11.2.3.7.11.37.7.5,HP-PROCURVE-420-PRIVATE-MIB::hpdot11AuthenticationEntry,,,,,,
.1.3.6.1.4.1.11.2.3.7.11.37.7.5.1,HP-PROCURVE-420-PRIVATE-MIB::hpdot118021xSupport,INTEGER,read-write,,mandatory,false(2):true(1),This attribute, when true(1), indicates that the Enterprise Access Point supports the 802.1x authentication algorithm.
.1.3.6.1.4.1.11.2.3.7.11.37.7.5.2,HP-PROCURVE-420-PRIVATE-MIB::hpdot118021xRequired,INTEGER,read-write,,mandatory,false(2):true(1),This attribute, when true(1), indicates that the Enterprise Access Point requires successful 802.1x authentication  for any clients accessing the network.
.1.3.6.1.4.1.11.2.3.7.11.37.7.6,HP-PROCURVE-420-PRIVATE-MIB::hpdot11AuthenticationServerTable,,not-accessible,,mandatory,,Table of descriptive and status information about configuration of each authentication server.
.1.3.6.1.4.1.11.2.3.7.11.37.7.6.1,HP-PROCURVE-420-PRIVATE-MIB::hpdot11AuthenticationServerEntry,,not-accessible,hpdot11serverIndex,mandatory,,An entry in the table, containing information about configuration in one radio of the AP.
.1.3.6.1.4.1.11.2.3.7.11.37.7.6.1.1,HP-PROCURVE-420-PRIVATE-MIB::hpdot11serverIndex,Integer32,not-accessible,,mandatory,,Radio index of the AP.
.1.3.6.1.4.1.11.2.3.7.11.37.7.6.1.2,HP-PROCURVE-420-PRIVATE-MIB::hpdot11AuthenticationServer,IpAddress,read-write,,mandatory,,This values indicates the IP address of the  authentication server.
.1.3.6.1.4.1.11.2.3.7.11.37.7.6.1.3,HP-PROCURVE-420-PRIVATE-MIB::hpdot11AuthenticationPort,INTEGER,read-write,,mandatory,,This values indicates the UDP Port used by the primary authentication server.
.1.3.6.1.4.1.11.2.3.7.11.37.7.6.1.4,HP-PROCURVE-420-PRIVATE-MIB::hpdot11AuthenticationKey,OCTET,read-write,,mandatory,,This values indicates the shared key used by the  authentication server.
.1.3.6.1.4.1.11.2.3.7.11.37.7.6.1.5,HP-PROCURVE-420-PRIVATE-MIB::hpdot11AuthenticationRetransmit,INTEGER,read-write,,mandatory,,This values indicates the retransmit timer length used by the  authentication server.
.1.3.6.1.4.1.11.2.3.7.11.37.7.6.1.6,HP-PROCURVE-420-PRIVATE-MIB::hpdot11AuthenticationTimeout,INTEGER,read-write,,mandatory,,This values indicates the Timeout value(sec) used by the  authentication server.
.1.3.6.1.4.1.11.2.3.7.11.37.7.7,HP-PROCURVE-420-PRIVATE-MIB::hpdot11FilterTable,,not-accessible,,mandatory,,Table of status information about each configured MAC Address Filtering Entry.
.1.3.6.1.4.1.11.2.3.7.11.37.7.7.1,HP-PROCURVE-420-PRIVATE-MIB::hpdot11FilterEntry,,not-accessible,hpdot11FilterIndex,mandatory,,An entry in the table, containing information about configuration in one radio of the AP.
.1.3.6.1.4.1.11.2.3.7.11.37.7.7.1.1,HP-PROCURVE-420-PRIVATE-MIB::hpdot11FilterIndex,Integer32,not-accessible,,mandatory,,Filter index.
.1.3.6.1.4.1.11.2.3.7.11.37.7.7.1.2,HP-PROCURVE-420-PRIVATE-MIB::hpdot11FilterAddress,OCTET,read-write,,mandatory,,This values indicates the MAC address of the  filter entry.
.1.3.6.1.4.1.11.2.3.7.11.37.7.7.1.3,HP-PROCURVE-420-PRIVATE-MIB::hpdot11FilterStatus,INTEGER,read-write,,mandatory,allowed(30):denied(31),This values indicates the Status of the filter entry. Ifallowed, the client is allowed access to the network. If disallowed, the no frames will be forwarded to the  network from the client.
.1.3.6.1.4.1.11.2.3.7.11.37.7.8,HP-PROCURVE-420-PRIVATE-MIB::hpdot11smt,,,,,,
.1.3.6.1.4.1.11.2.3.7.11.37.7.8.1,HP-PROCURVE-420-PRIVATE-MIB::hpdot11WEPDefaultKeys11g,,,,,,
.1.3.6.1.4.1.11.2.3.7.11.37.7.8.1.1,HP-PROCURVE-420-PRIVATE-MIB::hpdot11WEPDefaultKeys11gTable,,not-accessible,,mandatory,,Conceptual table for WEP default keys. This table shall contain the four WEP default secret key values corresponding to the four possible KeyID values. The WEP default secret keys are logically WRITE-ONLY. Attempts to read the entries in this table shall return unsuccessful status and values of null or zero. The default value of each WEP default key shall be null.
.1.3.6.1.4.1.11.2.3.7.11.37.7.8.1.1.1,HP-PROCURVE-420-PRIVATE-MIB::hpdot11WEPDefaultKeys11gEntry,,not-accessible,dot11WEPDefaultKey11gLength,mandatory,,An Entry (conceptual row) in the WEP Default Keys Table.  ifIndex - Each 802.11 interface is represented by an ifEntry. Interface tables in this MIB module are indexed by ifIndex.
.1.3.6.1.4.1.11.2.3.7.11.37.7.8.1.1.1.1,HP-PROCURVE-420-PRIVATE-MIB::hpdot11WEPDefaultKey11gLength,INTEGER,read-write,,mandatory,sixtyFour(64):oneHundredTwentyEight(128):oneHundredFiftyTwo(152),A 40(64)-bits [5 octets WEP], 104(128)-bits [13 octets] or 128(152)-bits [16 octets]
.1.3.6.1.4.1.11.2.3.7.11.37.7.8.1.1.1.2,HP-PROCURVE-420-PRIVATE-MIB::hpdot11WEPDefaultKey11gIndex,INTEGER,not-accessible,,mandatory,,The auxiliary variable used to identify instances of the columnar objects in the WEP Default Keys Table. The value of this variable is equal to the WEPDefaultKeyID + 1
.1.3.6.1.4.1.11.2.3.7.11.37.7.8.1.1.1.3,HP-PROCURVE-420-PRIVATE-MIB::hpdot11WEPDefaultKey11gValue,OCTET,read-write,,mandatory,,A 40(64)-bits [5 octets WEP] or 104(128)-bits [13 octets]  default secret key value.
.1.3.6.1.4.1.11.2.3.7.11.38,HP-ICF-OID::hpSwitchJ8133A,,,,,,The authoritative identifier for the HP J8133A Wireless Access Point AP520WL.
.1.3.6.1.4.1.11.2.3.7.11.39,HP-ICF-OID::hpSwitchJ8153A,,,,,,The authoritative identifier for the HP J8153A Access Controller 720WL.
.1.3.6.1.4.1.11.2.3.7.11.40,HP-ICF-OID::hpSwitchJ8154A,,,,,,The authoritative identifier for the HP J8154A Access Controller Server 740WL.
.1.3.6.1.4.1.11.2.3.7.11.41,HP-ICF-OID::hpSwitchJ8155A,,,,,,The authoritative identifier for the HP J8155A Integrated Access Manager 760WL.
.1.3.6.1.4.1.11.2.3.7.11.42,HP-ICF-OID::hpSwitchJ4905A,,,,,,The authoritative identifier for the J4905A HP 3400cl-24G Switch.
.1.3.6.1.4.1.11.2.3.7.11.42.1,HP-ICF-OID::hpSwitchModuleJ4905A,,,,,,The authoritative identifier for the J4905A 24-port 10/100/1000-T + 4-port Gigabit module.
.1.3.6.1.4.1.11.2.3.7.11.43,HP-ICF-OID::hpSwitchJ4906A,,,,,,The authoritative identifier for the J4906A HP 3400cl-48G Switch.
.1.3.6.1.4.1.11.2.3.7.11.43.1,HP-ICF-OID::hpSwitchModuleJ4906A,,,,,,The authoritative identifier for the J4906A 48-port 10/100/1000-T + 4-port  Gigabit module.
.1.3.6.1.4.1.11.2.3.7.11.44,HP-ICF-OID::hpSwitchJ4899B,,,,,,The authoritative identifier for the J4899B HP 2650 Switch.
.1.3.6.1.4.1.11.2.3.7.11.44.1,HP-ICF-OID::hpSwitchModuleJ4899B,,,,,,The authoritative identifier for the J4899B HP 2650 48-port 10/100-T + 2-port Gig module.
.1.3.6.1.4.1.11.2.3.7.11.45,HP-ICF-OID::hpSwitchJ4900B,,,,,,The authoritative identifier for the J4900B HP 2626 Switch.
.1.3.6.1.4.1.11.2.3.7.11.45.1,HP-ICF-OID::hpSwitchModuleJ4900B,,,,,,The authoritative identifier for the J4900B HP 2626 24-port 10/100-T + 2-port Gig module.
.1.3.6.1.4.1.11.2.3.7.11.48,HP-ICF-OID::hpSwitchJ8433A,,,,,,The authoritative identifier for the J8433A HP 6400cl-6XG Switch.
.1.3.6.1.4.1.11.2.3.7.11.48.1,HP-ICF-OID::hpSwitchModuleJ8433A,,,,,,The authoritative identifier for the J8433A HP 6400cl-6XG Switch.
.1.3.6.1.4.1.11.2.3.7.11.49,HP-ICF-OID::hpSwitchJ8474A,,,,,,The authoritative identifier for the J8474A HP 6410cl-6XG Switch.
.1.3.6.1.4.1.11.2.3.7.11.49.1,HP-ICF-OID::hpSwitchModuleJ8474A,,,,,,The authoritative identifier for the J8474A HP 6410cl-6XG Switch.
.1.3.6.1.4.1.11.2.3.7.11.50,HP-ICF-OID::hpSwitchJ8697A,,,,,,The authoritative identifier for the J8697A HP 5406zl Switch.
.1.3.6.1.4.1.11.2.3.7.11.50.1,HP-ICF-OID::hpSwitchModuleJ8701A,,,,,,The authoritative identifier for the HP J8701A 24 port Gig-T.
.1.3.6.1.4.1.11.2.3.7.11.50.2,HP-ICF-OID::hpSwitchModuleJ8702A,,,,,,The authoritative identifier for the HP J8702A 24 port Gig-T zl Module.
.1.3.6.1.4.1.11.2.3.7.11.50.3,HP-ICF-OID::hpSwitchModuleJ8705A,,,,,,The authoritative identifier for the HP J8705A Gig-T/SFP zl Module.
.1.3.6.1.4.1.11.2.3.7.11.50.4,HP-ICF-OID::hpSwitchModuleJ8706A,,,,,,The authoritative identifier for the HP J8706A 24 port SFP zl Module. 
.1.3.6.1.4.1.11.2.3.7.11.50.5,HP-ICF-OID::hpSwitchModuleJ8707A,,,,,,The authoritative identifier for the HP J8707A 4 port 10-GbE zl Module.
.1.3.6.1.4.1.11.2.3.7.11.50.6,HP-ICF-OID::hpSwitchModuleJ8708A,,,,,,The authoritative identifier for the HP J8708A 4 port 10G CX4 zl Module. 
.1.3.6.1.4.1.11.2.3.7.11.50.7,HP-ICF-OID::hpSwitchModuleJ87xxA,,,,,,The authoritative identifier for the HP J87xxA yl Fixed Gig-T/SFP.
.1.3.6.1.4.1.11.2.3.7.11.50.8,HP-ICF-OID::hpSwitchModuleJ87yyA,,,,,,The authoritative identifier for the HP J87yyA yl Fixed 24p Gig-T.
.1.3.6.1.4.1.11.2.3.7.11.50.9,HP-ICF-OID::hpSwitchModuleJ8694A,,,,,,The authoritative identifier for the HP J8694A yl X2/CX4 10-GbE Module.
.1.3.6.1.4.1.11.2.3.7.11.50.10,HP-ICF-OID::hpSwitchModuleJ8726A,,,,,,The authoritative identifier for the J8726A HP 5400 zl Switch Management Module.
.1.3.6.1.4.1.11.2.3.7.11.50.14,HP-ICF-OID::hpSwitchModuleJ9051A,,,,,,The authoritative identifier for the HP J9051A Wireless Services zl Module.
.1.3.6.1.4.1.11.2.3.7.11.50.15,HP-ICF-OID::hpSwitchModuleJ9052A,,,,,,The authoritative identifier for the HP J9052A Redundant Wireless Services zl Module.
.1.3.6.1.4.1.11.2.3.7.11.50.16,HP-ICF-OID::hpSwitchModuleJ9154A,,,,,,The authoritative identifier for the HP J9154A Services zl Module.
.1.3.6.1.4.1.11.2.3.7.11.50.17,HP-ICF-OID::hpSwitchModuleJ9155A,,,,,,The authoritative identifier for the HP J9155A zl Threat Management Services Module.
.1.3.6.1.4.1.11.2.3.7.11.50.18,HP-ICF-OID::hpSwitchModuleJ9446A,,,,,,The authoritative identifier for the HP J9446A zl Data Center Connection Manager ONE Module.
.1.3.6.1.4.1.11.2.3.7.11.50.19,HP-ICF-OID::hpSwitchModuleJ9307A,,,,,,The authoritative identifier for the HP J9307A 24-Port 10/100/1000 PoE+ zl Module.
.1.3.6.1.4.1.11.2.3.7.11.50.20,HP-ICF-OID::hpSwitchModuleJ9308A,,,,,,The authoritative identifier for the HP J9308A 20-Port 10/100/1000 PoE+ with 4-Port SFP zl Module.
.1.3.6.1.4.1.11.2.3.7.11.50.21,HP-ICF-OID::hpSwitchModuleJ9478A,,,,,,The authoritative identifier for the HP J9478A 24-Port 10/100 PoE+ zl Module.
.1.3.6.1.4.1.11.2.3.7.11.50.22,HP-ICF-OID::hpSwitchModuleJ9309A,,,,,,The authoritative identifier for the HP J9309A 4-Port 10-GbE SFP+ zl Module.
.1.3.6.1.4.1.11.2.3.7.11.50.23,HP-ICF-OID::hpSwitchModuleJ9312A,,,,,,The authoritative identifier for the HP J9312A yl SFP+/CX4 10G Module.
.1.3.6.1.4.1.11.2.3.7.11.50.24,HP-ICF-OID::hpSwitchModuleJ9534A,,,,,,The authoritative identifier for the HP J9534A 24 port Gig-T PoE+ v2 zl Module.
.1.3.6.1.4.1.11.2.3.7.11.50.25,HP-ICF-OID::hpSwitchModuleJ9535A,,,,,,The authoritative identifier for the HP J9535A 20-Port Gig-T PoE+ / 4-Port SFP v2 zl Module.
.1.3.6.1.4.1.11.2.3.7.11.50.26,HP-ICF-OID::hpSwitchModuleJ9536A,,,,,,The authoritative identifier for the HP J9536A 20-Port Gig-T PoE+ / 2-Port SFP+ zl Module.
.1.3.6.1.4.1.11.2.3.7.11.50.27,HP-ICF-OID::hpSwitchModuleJ9537A,,,,,,The authoritative identifier for the HP J9537A 24-Port SFP v2 zl Module.
.1.3.6.1.4.1.11.2.3.7.11.50.28,HP-ICF-OID::hpSwitchModuleJ9538A,,,,,,The authoritative identifier for the HP J9538A 8-Port 10GbE SFP+ v2 zl Module.
.1.3.6.1.4.1.11.2.3.7.11.50.29,HP-ICF-OID::hpSwitchModuleJ9546A,,,,,,The authoritative identifier for the HP J9546A 8-Port 10Gig-T LH zl Module.
.1.3.6.1.4.1.11.2.3.7.11.50.30,HP-ICF-OID::hpSwitchModuleJ9547A,,,,,,The authoritative identifier for the HP J9547A 24-Port 10/100 PoE+ zl Module.
.1.3.6.1.4.1.11.2.3.7.11.50.31,HP-ICF-OID::hpSwitchModuleJ9548A,,,,,,The authoritative identifier for the HP J9548A 20-Port Gig-T / 2-Port 10GbE SFP+ v2 zl Module.
.1.3.6.1.4.1.11.2.3.7.11.50.32,HP-ICF-OID::hpSwitchModuleJ9549A,,,,,,The authoritative identifier for the HP J9549A 20-Port Gig-T / 4-Port SFP v2 zl Module.
.1.3.6.1.4.1.11.2.3.7.11.50.33,HP-ICF-OID::hpSwitchModuleJ9550A,,,,,,The authoritative identifier for the HP J9550A 24-Port Gig-T v2 zl Module.
.1.3.6.1.4.1.11.2.3.7.11.50.34,HP-ICF-OID::hpSwitchAdvServicesModule,,,,,,The authoritative identifier for the HP Advanced Services zl Module. The actual JwxyzA product number varies by SKU.
.1.3.6.1.4.1.11.2.3.7.11.50.35,HP-ICF-OID::hpSwitchExtServicesModule,,,,,,The authoritative identifier for the HP Extended Services zl Module. The actual JwxyzA product number varies by SKU.
.1.3.6.1.4.1.11.2.3.7.11.50.36,HP-ICF-OID::hpSwitchModuleJ9485A,,,,,,The authoritative identifier for the HP AllianceONE zl module (J9485A) with PCIe telephony interfaces, Microsoft Windows Server 2008 and Communications Server software installed.
.1.3.6.1.4.1.11.2.3.7.11.50.37,HP-ICF-OID::hpSwitchModuleJ9637A,,,,,,The authoritative identifier for the HP J9637A 12-Port Gig-T PoE+ / 12-Port SFP v2 zl Module.
.1.3.6.1.4.1.11.2.3.7.11.50.41,HP-ICF-OID::hpSwitchV2ServicesModule,,,,,,The authoritative identifier for the HP Advanced Services v2 zl Module. The actual JwxyzA product number varies by SKU.
.1.3.6.1.4.1.11.2.3.7.11.51,HP-ICF-OID::hpSwitchJ8698A,,,,,,The authoritative identifier for the J8698A HP 5412zl Switch. 
.1.3.6.1.4.1.11.2.3.7.11.52,HP-ICF-OID::hpSwitchJ8770A,,,,,,The authoritative identifier for the J8770A HP 4204vl Switch.
.1.3.6.1.4.1.11.2.3.7.11.52.1,HP-ICF-OID::hpSwitchModuleJ8765A,,,,,,The authoritative identifier for the HP J8765A 10/100 module.
.1.3.6.1.4.1.11.2.3.7.11.52.2,HP-ICF-OID::hpSwitchModuleJ8764A,,,,,,The authoritative identifier for the HP J8764A 10/100/1000 module.
.1.3.6.1.4.1.11.2.3.7.11.52.3,HP-ICF-OID::hpSwitchModuleJ8776A,,,,,,The authoritative identifier for the HP J8776A miniGBIC module.
.1.3.6.1.4.1.11.2.3.7.11.52.4,HP-ICF-OID::hpSwitchModuleJ8763A,,,,,,The authoritative identifier for the HP J8763A 100FX module.
.1.3.6.1.4.1.11.2.3.7.11.52.5,HP-ICF-OID::hpSwitchModuleJ8768A,,,,,,The authoritative identifier for the HP J8768A Gig-T vl module.
.1.3.6.1.4.1.11.2.3.7.11.52.6,HP-ICF-OID::hpSwitchModuleJ9033A,,,,,,The authoritative identifier for the HP J9033A Gig-T/SFP vl module.
.1.3.6.1.4.1.11.2.3.7.11.52.10,HP-ICF-OID::hpSwitchModuleJ8766A,,,,,,The authoritative identifier for the HP J8766A 10-GbE X2 vl module.
.1.3.6.1.4.1.11.2.3.7.11.53,HP-ICF-OID::hpSwitchJ8773A,,,,,,The authoritative identifier for the J8773A HP 4208vl Switch.
.1.3.6.1.4.1.11.2.3.7.11.54,HP-ICF-OID::hpSwitchJ8680A,,,,,,The authoritative identifier for the J8680A HP E9408sl Router.
.1.3.6.1.4.1.11.2.3.7.11.55,HP-ICF-OID::hpSwitchJ8762A,,,,,,The authoritative identifier for the J8762A HP 2600-8-PWR Switch.
.1.3.6.1.4.1.11.2.3.7.11.55.1,HP-ICF-OID::hpSwitchModuleJ8762A,,,,,,The authoritative identifier for the J8762A HP 2600-8-PWR 8-port 10/100-T + 1-port Gig module.
.1.3.6.1.4.1.11.2.3.7.11.56,HP-ICF-OID::hpSwitchJ8771A,,,,,,The authoritative identifier for the J8771A HP 4202vl-48G Switch.
.1.3.6.1.4.1.11.2.3.7.11.57,HP-ICF-OID::hpSwitchJ8772A,,,,,,The authoritative identifier for the J8772A HP 4202vl-72 Switch.
.1.3.6.1.4.1.11.2.3.7.11.58,HP-ICF-OID::hpSwitchJ8692A,,,,,,The authoritative identifier for the J8692A HP 3500yl-24G-PWR Switch.
.1.3.6.1.4.1.11.2.3.7.11.59,HP-ICF-OID::hpSwitchJ8693A,,,,,,The authoritative identifier for the J8693A HP 3500yl-48G-PWR Switch.
.1.3.6.1.4.1.11.2.3.7.11.60,HP-ICF-OID::hpSwitchJ8992A,,,,,,The authoritative identifier for the J8992A HP 6200yl-24G Switch.
.1.3.6.1.4.1.11.2.3.7.11.61,HP-ICF-OID::hpSwitchJ9019A,,,,,,The authoritative identifier for the J9019A HP 2510-24 Switch.
.1.3.6.1.4.1.11.2.3.7.11.61.1,HP-ICF-OID::hpSwitchModuleJ9019A,,,,,,The authoritative identifier for the J9019A Fixed 24-port 10/100-T module.
.1.3.6.1.4.1.11.2.3.7.11.62,HP-ICF-OID::hpSwitchJ9020A,,,,,,The authoritative identifier for the J9020A HP 2510-48 Switch.
.1.3.6.1.4.1.11.2.3.7.11.62.1,HP-ICF-OID::hpSwitchModuleJ9020A,,,,,,The authoritative identifier for the J9020A Fixed 48-port 10/100-T module.
.1.3.6.1.4.1.11.2.3.7.11.63,HP-ICF-OID::hpSwitchJ9021A,,,,,,The authoritative identifier for the J9021A HP 2810-24G Switch.
.1.3.6.1.4.1.11.2.3.7.11.63.1,HP-ICF-OID::hpSwitchModuleJ9021A,,,,,,The authoritative identifier for the J9021A Fixed 24-port 10/100/1000-T module.
.1.3.6.1.4.1.11.2.3.7.11.64,HP-ICF-OID::hpSwitchJ9022A,,,,,,The authoritative identifier for the J9022A HP 2810-48G Switch.
.1.3.6.1.4.1.11.2.3.7.11.64.1,HP-ICF-OID::hpSwitchModuleJ9022A,,,,,,The authoritative identifier for the J9022A Fixed 48-port 10/100/1000-T module.
.1.3.6.1.4.1.11.2.3.7.11.65,HP-ICF-OID::hpSwitchJ9028A,,,,,,The authoritative identifier for the J9028A HP 1800-24G Switch.
.1.3.6.1.4.1.11.2.3.7.11.66,HP-ICF-OID::hpSwitchJ9029A,,,,,,The authoritative identifier for the J9029A HP 1800-8G Switch.
.1.3.6.1.4.1.11.2.3.7.11.67,HP-ICF-OID::hpSwitchJ9038A,,,,,,The authoritative identifier for the HP J9038A Access Control Server 745wl.
.1.3.6.1.4.1.11.2.3.7.11.68,HP-ICF-OID::hpSwitchJ9050A,,,,,,The authoritative identifier for the J9050A HP 2900-48G Switch.
.1.3.6.1.4.1.11.2.3.7.11.68.11,HP-ICF-OID::hpSwitchModuleJ90xxA,,,,,,The authoritative identifier for the HP J9050A yl Fixed Gig-T/SFP.
.1.3.6.1.4.1.11.2.3.7.11.68.12,HP-ICF-OID::hpSwitchModuleJ90yyA,,,,,,The authoritative identifier for the HP J9050A yl Fixed 24p Gig-T.
.1.3.6.1.4.1.11.2.3.7.11.68.13,HP-ICF-OID::hpSwitchModuleJ90zzA,,,,,,The authoritative identifier for the HP J9050A yl X2/CX4 10-GbE Module.
.1.3.6.1.4.1.11.2.3.7.11.69,HP-ICF-OID::hpSwitchJ9049A,,,,,,The authoritative identifier for the J9049A HP 2900-24G Switch.
.1.3.6.1.4.1.11.2.3.7.11.72,HP-ICF-OID::hpSwitchJ9091A,,,,,,The authoritative identifier for the J9091A HP 8212zl Switch. 
.1.3.6.1.4.1.11.2.3.7.11.72.1,HP-ICF-OID::hpManagementModuleJ9092A,,,,,,The authoritative identifier for the J9092A HP 8200zl Switch Management Module.
.1.3.6.1.4.1.11.2.3.7.11.72.2,HP-ICF-OID::hpFabricModuleJ9093A,,,,,,The authoritative identifier for the J9093A HP 8200zl Switch Fabric Module.
.1.3.6.1.4.1.11.2.3.7.11.72.3,HP-ICF-OID::hpSSMModuleJ8784A,,,,,,The authoritative identifier for the J8784A HP 8212zl Switch System Support Module.
.1.3.6.1.4.1.11.2.3.7.11.73,HP-ICF-OID::hpSwitchJ9065A,,,,,,The authoritative identifier for the HP J9065A Network Access Controller 800. 
.1.3.6.1.4.1.11.2.3.7.11.74,HP-ICF-OID::hpSwitchJ9079A,,,,,,The authoritative identifier for the J9079A HP 1700-8 Switch. 
.1.3.6.1.4.1.11.2.3.7.11.75,HP-ICF-OID::hpSwitchJ9080A,,,,,,The authoritative identifier for the J9080A HP 1700-24 Switch. 
.1.3.6.1.4.1.11.2.3.7.11.76,HP-ICF-OID::hpSwitchJ9085A,,,,,,The authoritative identifier for the J9085A HP 2610-24 Switch.
.1.3.6.1.4.1.11.2.3.7.11.76.1,HP-ICF-OID::hpSwitchModuleJ9085A,,,,,,The authoritative identifier for the J9085A Fixed 24-port 10/100-T + 4-port Gigabit module.
.1.3.6.1.4.1.11.2.3.7.11.77,HP-ICF-OID::hpSwitchJ9088A,,,,,,The authoritative identifier for the J9088A HP 2610-48 Switch. 
.1.3.6.1.4.1.11.2.3.7.11.77.1,HP-ICF-OID::hpSwitchModuleJ9088A,,,,,,The authoritative identifier for the J9088A Fixed 48-port 10/100-T + 4-port Gigabit module.
.1.3.6.1.4.1.11.2.3.7.11.78,HP-ICF-OID::hpSwitchJ9087A,,,,,,The authoritative identifier for the J9087A HP 2610-24-PWR Switch. 
.1.3.6.1.4.1.11.2.3.7.11.78.1,HP-ICF-OID::hpSwitchModuleJ9087A,,,,,,The authoritative identifier for the J9087A Fixed 24-port 10/100-T + 4-port Gigabit module.
.1.3.6.1.4.1.11.2.3.7.11.79,HP-ICF-OID::hpSwitchJ9089A,,,,,,The authoritative identifier for the J9089A HP 2610-48-PWR Switch. 
.1.3.6.1.4.1.11.2.3.7.11.79.1,HP-ICF-OID::hpSwitchModuleJ9089A,,,,,,The authoritative identifier for the J9089A Fixed 48-port 10/100-T + 4-port Gigabit module.
.1.3.6.1.4.1.11.2.3.7.11.80,HP-ICF-OID::hpSwitchJ9086A,,,,,,The authoritative identifier for the J9086A HP E2610-24-PPoE Switch .
.1.3.6.1.4.1.11.2.3.7.11.80.1,HP-ICF-OID::hpSwitchModuleJ9086A,,,,,,The authoritative identifier for the J9086A Fixed 24-port 10/100-T + 4-port Gigabit module.
.1.3.6.1.4.1.11.2.3.7.11.81,HP-ICF-OID::hpSwitchJ9028B,,,,,,The authoritative identifier for the J9028B HP 1800-24G Switch .
.1.3.6.1.4.1.11.2.3.7.11.82,HP-ICF-OID::hpSwitchJ4900C,,,,,,The authoritative identifier for the J4900C HP 2626 Switch .
.1.3.6.1.4.1.11.2.3.7.11.82.1,HP-ICF-OID::hpSwitchModuleJ4900C,,,,,,The authoritative identifier for the J4900C HP 2626 24-port 10/100-T + 2-port Gig module.
.1.3.6.1.4.1.11.2.3.7.11.83,HP-ICF-OID::hpSwitchJ4899C,,,,,,The authoritative identifier for the J4899C HP 2650C Switch .
.1.3.6.1.4.1.11.2.3.7.11.83.1,HP-ICF-OID::hpSwitchModuleJ4899C,,,,,,The authoritative identifier for the J4899C HP 2650 48-port 10/100-T + 2-port Gig module.
.1.3.6.1.4.1.11.2.3.7.11.84,HP-ICF-OID::hpSwitchJ9146A,,,,,,The authoritative identifier for the J9146A HP 2910al-24G-PoE+ Switch.
.1.3.6.1.4.1.11.2.3.7.11.84.1,HP-ICF-OID::hpSwitchModuleJ9146A,,,,,,The authoritative identifier for the J9146A al Fixed 24p Gig-T/SFP module.
.1.3.6.1.4.1.11.2.3.7.11.84.2,HP-ICF-OID::hpSwitchModuleJ9149A,,,,,,The authoritative identifier for the HP J9149A 10-GbE 2-port CX4
.1.3.6.1.4.1.11.2.3.7.11.84.3,HP-ICF-OID::hpSwitchModuleJ9008A,,,,,,The authoritative identifier for the HP J9008A 10-GbE 2-port SFP+
.1.3.6.1.4.1.11.2.3.7.11.84.4,HP-ICF-OID::hpSwitchModuleJ9165A,,,,,,The authoritative identifier for the HP J9165A 10-GbE 1-port passive CX4
.1.3.6.1.4.1.11.2.3.7.11.85,HP-ICF-OID::hpSwitchJ9148A,,,,,,The authoritative identifier for the J9148A HP 2910al-48G-PoE+ Switch.
.1.3.6.1.4.1.11.2.3.7.11.85.1,HP-ICF-OID::hpSwitchModuleJ9148A,,,,,,The authoritative identifier for the J9148A al Fixed 48p Gig-T/SFP module.
.1.3.6.1.4.1.11.2.3.7.11.86,HP-ICF-OID::hpSwitchJ9145A,,,,,,The authoritative identifier for the J9145A HP 2910al-24G Switch.
.1.3.6.1.4.1.11.2.3.7.11.86.1,HP-ICF-OID::hpSwitchModuleJ9145A,,,,,,The authoritative identifier for the J9145A al Fixed 24p Gig-T/SFP module.
.1.3.6.1.4.1.11.2.3.7.11.87,HP-ICF-OID::hpSwitchJ9147A,,,,,,The authoritative identifier for the J9147A HP 2910al-48G Switch.
.1.3.6.1.4.1.11.2.3.7.11.87.1,HP-ICF-OID::hpSwitchModuleJ9147A,,,,,,The authoritative identifier for the J9147A al Fixed 48p Gig-T/SFP module.
.1.3.6.1.4.1.11.2.3.7.11.88,HP-ICF-OID::hpSwitchJ9279A,,,,,,The authoritative identifier for the J9279A HP 2510G-24 Switch. 
.1.3.6.1.4.1.11.2.3.7.11.88.1,HP-ICF-OID::hpSwitchModuleJ9279A,,,,,,The authoritative identifier for the J9279A HP 2510G-24 Switch.
.1.3.6.1.4.1.11.2.3.7.11.89,HP-ICF-OID::hpSwitchJ9280A,,,,,,The authoritative identifier for the J9280A HP 2510G-48 Switch. 
.1.3.6.1.4.1.11.2.3.7.11.89.1,HP-ICF-OID::hpSwitchModuleJ9280A,,,,,,The authoritative identifier for the J9280A HP 2510G-48 Switch.
.1.3.6.1.4.1.11.2.3.7.11.90,HP-ICF-OID::hpSwitchJ9019B,,,,,,The authoritative identifier for the J9019B HP 2510-24B Switch.
.1.3.6.1.4.1.11.2.3.7.11.94,HP-ICF-OID::hpSwitchJ9137A,,,,,,The authoritative identifier for the J9137A HP 2520-8 Switch. 
.1.3.6.1.4.1.11.2.3.7.11.94.1,HP-ICF-OID::hpSwitchModuleJ9137A,,,,,,The authoritative identifier for the J9137A HP 2520-8 Switch.
.1.3.6.1.4.1.11.2.3.7.11.95,HP-ICF-OID::hpSwitchJ9138A,,,,,,The authoritative identifier for the J9138A HP 2520-24 Switch. 
.1.3.6.1.4.1.11.2.3.7.11.95.1,HP-ICF-OID::hpSwitchModuleJ9138A,,,,,,The authoritative identifier for the J9138A HP 2520-24 Switch.
.1.3.6.1.4.1.11.2.3.7.11.96,HP-ICF-OID::hpSwitchJ9298A,,,,,,The authoritative identifier for the J9298A HP 2520G-8 Switch. 
.1.3.6.1.4.1.11.2.3.7.11.96.1,HP-ICF-OID::hpSwitchModuleJ9298A,,,,,,The authoritative identifier for the J9298A HP 2520G-8 Switch.
.1.3.6.1.4.1.11.2.3.7.11.97,HP-ICF-OID::hpSwitchJ9299A,,,,,,The authoritative identifier for the J9299A HP 2520G-24 Switch. 
.1.3.6.1.4.1.11.2.3.7.11.97.1,HP-ICF-OID::hpSwitchModuleJ9299A,,,,,,The authoritative identifier for the J9299A HP 2520G-24 Switch.
.1.3.6.1.4.1.11.2.3.7.11.98,HP-ICF-OID::hpSwitchJ9265A,,,,,,The authoritative identifier for the J9265A HP 6600-24XG Switch. 
.1.3.6.1.4.1.11.2.3.7.11.98.1,HP-ICF-OID::hpSwitchModuleJ92yyA,,,,,,The authoritative identifier for the HP J92yyA ml Fixed 4p SFP+.
.1.3.6.1.4.1.11.2.3.7.11.98.2,HP-ICF-OID::hpSwitchModuleJ92xxA,,,,,,The authoritative identifier for the HP J92xxA ml Fixed Gig-T/SFP.
.1.3.6.1.4.1.11.2.3.7.11.98.3,HP-ICF-OID::hpSwitchModuleJ92wwA,,,,,,The authoritative identifier for the HP J92wwA ml Fixed 24 Gig.
.1.3.6.1.4.1.11.2.3.7.11.98.4,HP-ICF-OID::hpSwitchModuleJ92vvA,,,,,,The authoritative identifier for the HP J92vvA ml Fixed 24 Gig DP.
.1.3.6.1.4.1.11.2.3.7.11.98.5,HP-ICF-OID::hpSwitchModuleJ92uuA,,,,,,The authoritative identifier for the HP J92uuA ml Fixed 24 Gig Non DP.
.1.3.6.1.4.1.11.2.3.7.11.98.6,HP-ICF-OID::hpSwitchModuleJ92ttA,,,,,,The authoritative identifier for the HP J92ttA ml Fixed 2 10Gig.
.1.3.6.1.4.1.11.2.3.7.11.99,HP-ICF-OID::hpEtherSwitchPortType,,,,,,
.1.3.6.1.4.1.11.2.3.7.11.99.1,HP-ICF-OID::hpEtherSwitchPort10T,,,,,,
.1.3.6.1.4.1.11.2.3.7.11.99.2,HP-ICF-OID::hpEtherSwitchPort100T,,,,,,
.1.3.6.1.4.1.11.2.3.7.11.99.3,HP-ICF-OID::hpEtherSwitchPort100VG,,,,,,
.1.3.6.1.4.1.11.2.3.7.11.99.4,HP-ICF-OID::hpEtherSwitchPort100F,,,,,,
.1.3.6.1.4.1.11.2.3.7.11.100,HP-ICF-OID::hpSwitchJ9263A,,,,,,The authoritative identifier for the J9263A HP 6600-24G Switch. 
.1.3.6.1.4.1.11.2.3.7.11.101,HP-ICF-OID::hpSwitchJ9264A,,,,,,The authoritative identifier for the J9264A HP 6600-24G-4XG Switch. 
.1.3.6.1.4.1.11.2.3.7.11.102,HP-ICF-OID::hpSwitchJ9445A,,,,,,The authoritative identifier for the HP J9445A DCM Controller. 
.1.3.6.1.4.1.11.2.3.7.11.103,HP-ICF-OID::hpSwitchJ9449A,,,,,,The authoritative identifier for the J9449A HP 1810-8G Switch.
.1.3.6.1.4.1.11.2.3.7.11.104,HP-ICF-OID::hpSwitchJ9450A,,,,,,The authoritative identifier for the J9450A HP 1810-24G Switch.
.1.3.6.1.4.1.11.2.3.7.11.105,HP-ICF-OID::hpSwitchJ9452A,,,,,,The authoritative identifier for the J9452A HP 6600-48G-4XG Switch.
.1.3.6.1.4.1.11.2.3.7.11.106,HP-ICF-OID::hpSwitchJ9451A,,,,,,The authoritative identifier for the J9451A HP 6600-48G Switch .
.1.3.6.1.4.1.11.2.3.7.11.107,HP-ICF-OID::hpSwitch516733-B21,,,,,,The authoritative identifier for the 516733-B21 HP 6120-XG Switch.
.1.3.6.1.4.1.11.2.3.7.11.108,HP-ICF-OID::hpSwitch498358-B21,,,,,,The authoritative identifier for the 498358-B21 HP 6120-GXG Switch.
.1.3.6.1.4.1.11.2.3.7.11.109,HP-ICF-OID::hpSwitchJ9471A,,,,,,The authoritative identifier for the J9471A HP 3500-24-PoE Switch.
.1.3.6.1.4.1.11.2.3.7.11.110,HP-ICF-OID::hpSwitchJ9473A,,,,,,The authoritative identifier for the J9473A HP 3500-48-PoE Switch.
.1.3.6.1.4.1.11.2.3.7.11.110.1,HP-ICF-OID::hpSwitchModuleJ94yxA,,,,,,The authoritative identifier for the HP J94yxA Fixed 10/100Base-TX/SFP PoE.
.1.3.6.1.4.1.11.2.3.7.11.110.2,HP-ICF-OID::hpSwitchModuleJ94yyA,,,,,,The authoritative identifier for the HP J94yyA Fixed 24p 10/100Base-TX PoE.
.1.3.6.1.4.1.11.2.3.7.11.111,HP-ICF-OID::hpSwitchJ9470A,,,,,,The authoritative identifier for the J9470A HP 3500-24 Switch.
.1.3.6.1.4.1.11.2.3.7.11.112,HP-ICF-OID::hpSwitchJ9472A,,,,,,The authoritative identifier for the J9472A HP 3500-48 Switch.
.1.3.6.1.4.1.11.2.3.7.11.112.1,HP-ICF-OID::hpSwitchModuleJ94xxA,,,,,,The authoritative identifier for the HP J94xxA Fixed 10/100Base-TX/SFP.
.1.3.6.1.4.1.11.2.3.7.11.112.2,HP-ICF-OID::hpSwitchModuleJ94xyA,,,,,,The authoritative identifier for the HP J94xyA Fixed 24p 10/100Base-TX.
.1.3.6.1.4.1.11.2.3.7.11.113,HP-ICF-OID::hpSwitchJ9477A,,,,,,The authoritative identifier for the J9477A HP 8206zl Switch.
.1.3.6.1.4.1.11.2.3.7.11.114,HP-ICF-OID::hpSwitchJ9310A,,,,,,The authoritative identifier for the J9310A HP 3500yl-24G-PoE+ Switch.
.1.3.6.1.4.1.11.2.3.7.11.115,HP-ICF-OID::hpSwitchJ9311A,,,,,,The authoritative identifier for the J9311A HP 3500yl-48G-PoE+ Switch.
.1.3.6.1.4.1.11.2.3.7.11.115.1,HP-ICF-OID::hpSwitchModuleJ93aaA,,,,,,The authoritative identifier for the HP J93aaA Fixed Gig-T/SFP PoE+.
.1.3.6.1.4.1.11.2.3.7.11.115.2,HP-ICF-OID::hpSwitchModuleJ93bbA,,,,,,The authoritative identifier for the HP J93bbA Fixed 24p Gig-T PoE+.
.1.3.6.1.4.1.11.2.3.7.11.117,HP-ICF-OID::hpSwitchJ9565A,,,,,,The authoritative identifier for the J9565A HP 2615-8-PoE Switch.
.1.3.6.1.4.1.11.2.3.7.11.117.1,HP-ICF-OID::hpSwitchModuleJ9565A,,,,,,The authoritative identifier for the J9565A Fixed 8-port 10/100-T + 2-port Gigabit module.
.1.3.6.1.4.1.11.2.3.7.11.118,HP-ICF-OID::hpSwitchJ9562A,,,,,,The authoritative identifier for the J9562A HP 2915-8G-PoE Switch.
.1.3.6.1.4.1.11.2.3.7.11.118.1,HP-ICF-OID::hpSwitchModuleJ9562A,,,,,,The authoritative identifier for the J9562A 8-port 10/100/1000-T + 2-port Gigabit module.
.1.3.6.1.4.1.11.2.3.7.11.119,HP-ICF-OID::hpSwitchJ9573A,,,,,,The authoritative identifier for the HP E3800-24G-PoE+-2SFP+ Switch.
.1.3.6.1.4.1.11.2.3.7.11.119.1,HP-ICF-OID::hpSwitchModuleJ9573A,,,,,,The authoritative identifier for the HP E3800-24G-PoE+-2SFP+ Switch.
.1.3.6.1.4.1.11.2.3.7.11.120,HP-ICF-OID::hpSwitchJ9574A,,,,,,The authoritative identifier for the HP E3800-48G-PoE+-4SFP+ Switch.
.1.3.6.1.4.1.11.2.3.7.11.120.1,HP-ICF-OID::hpSwitchModuleJ9574x,,,,,,The authoritative identifier for the HP E3800-48G-PoE+-4SFP+ Switch.
.1.3.6.1.4.1.11.2.3.7.11.120.2,HP-ICF-OID::hpSwitchModuleJ9574y,,,,,,The authoritative identifier for the HP E3800-48G-PoE+-4SFP+ Switch.
.1.3.6.1.4.1.11.2.3.7.11.121,HP-ICF-OID::hpSwitchJ9575A,,,,,,The authoritative identifier for the HP E3800-24G-2SFP+ Switch.
.1.3.6.1.4.1.11.2.3.7.11.121.1,HP-ICF-OID::hpSwitchModuleJ9575A,,,,,,The authoritative identifier for the HP E3800-24G-2SFP+ Switch.
.1.3.6.1.4.1.11.2.3.7.11.122,HP-ICF-OID::hpSwitchJ9576A,,,,,,The authoritative identifier for the HP E3800-48G-4SFP+ Switch.
.1.3.6.1.4.1.11.2.3.7.11.122.1,HP-ICF-OID::hpSwitchModuleJ9576x,,,,,,The authoritative identifier for the HP E3800-48G-4SFP+ Switch.
.1.3.6.1.4.1.11.2.3.7.11.122.2,HP-ICF-OID::hpSwitchModuleJ9576y,,,,,,The authoritative identifier for the HP E3800-48G-4SFP+ Switch.
.1.3.6.1.4.1.11.2.3.7.11.123,HP-ICF-OID::hpSwitchJ9584A,,,,,,The authoritative identifier for the HP E3800-24SFP-2SFP+ Switch.
.1.3.6.1.4.1.11.2.3.7.11.123.1,HP-ICF-OID::hpSwitchModuleJ9584A,,,,,,The authoritative identifier for the HP E3800-24SFP-2SFP+ Switch.
.1.3.6.1.4.1.11.2.3.7.11.124,HP-ICF-OID::hpSwitchJ9585A,,,,,,The authoritative identifier for the HP E3800-24G-2XG Switch.
.1.3.6.1.4.1.11.2.3.7.11.124.1,HP-ICF-OID::hpSwitchModuleJ9585A,,,,,,The authoritative identifier for the HP E3800-24G-2XG Switch.
.1.3.6.1.4.1.11.2.3.7.11.125,HP-ICF-OID::hpSwitchJ9586A,,,,,,The authoritative identifier for the HP E3800-48G-4XG Switch.
.1.3.6.1.4.1.11.2.3.7.11.125.1,HP-ICF-OID::hpSwitchModuleJ9586x,,,,,,The authoritative identifier for the HP E3800-48G-4XG Switch.
.1.3.6.1.4.1.11.2.3.7.11.125.2,HP-ICF-OID::hpSwitchModuleJ9586y,,,,,,The authoritative identifier for the HP E3800-48G-4XG Switch.
.1.3.6.1.4.1.11.2.3.7.11.126,HP-ICF-OID::hpSwitchJ9587A,,,,,,The authoritative identifier for the HP E3800-24G-PoE+-2XG Switch.
.1.3.6.1.4.1.11.2.3.7.11.126.1,HP-ICF-OID::hpSwitchModuleJ9587A,,,,,,The authoritative identifier for the HP E3800-24G-PoE+-2XG Switch.
.1.3.6.1.4.1.11.2.3.7.11.127,HP-ICF-OID::hpSwitchJ9588A,,,,,,The authoritative identifier for the HP E3800-48G-PoE+-4XG Switch.
.1.3.6.1.4.1.11.2.3.7.11.127.1,HP-ICF-OID::hpSwitchModuleJ9588x,,,,,,The authoritative identifier for the HP E3800-48G-PoE+-4XG Switch.
.1.3.6.1.4.1.11.2.3.7.11.127.2,HP-ICF-OID::hpSwitchModuleJ9588y,,,,,,The authoritative identifier for the HP E3800-48G-PoE+-4XG Switch.
.1.3.6.1.4.1.11.2.3.7.11.128,HP-ICF-OID::hpSwitchJ9577A,,,,,,The authoritative identifier for the HP E3800 4-port Stacking Module.
.1.3.6.1.4.1.11.2.3.7.11.128.1,HP-ICF-OID::hpSwitchModuleJ9577A,,,,,,The authoritative identifier for the HP E3800 4-port Stacking Module.
.1.3.6.1.4.1.11.2.3.7.11.129,HP-ICF-OID::hpSwitchJ9623A,,,,,,The authoritative identifier for the J9623A HP 2620-24 Switch.
.1.3.6.1.4.1.11.2.3.7.11.129.1,HP-ICF-OID::hpSwitchModuleJ9623A,,,,,,The authoritative identifier for the J9623A Fixed 24p 10/100 module.
.1.3.6.1.4.1.11.2.3.7.11.130,HP-ICF-OID::hpSwitchJ9624A,,,,,,The authoritative identifier for the J9624A HP 2620-24-PPoE+ Switch.
.1.3.6.1.4.1.11.2.3.7.11.130.1,HP-ICF-OID::hpSwitchModuleJ9624A,,,,,,The authoritative identifier for the J9624A Fixed 24p PPoEP 10/100 module.
.1.3.6.1.4.1.11.2.3.7.11.131,HP-ICF-OID::hpSwitchJ9625A,,,,,,The authoritative identifier for the J9625A HP 2620-24-PoE+ Switch.
.1.3.6.1.4.1.11.2.3.7.11.131.1,HP-ICF-OID::hpSwitchModuleJ9625A,,,,,,The authoritative identifier for the J9625A Fixed 24p PoEP 10/100 module.
.1.3.6.1.4.1.11.2.3.7.11.132,HP-ICF-OID::hpSwitchJ9626A,,,,,,The authoritative identifier for the J9626A HP 2620-48 Switch.
.1.3.6.1.4.1.11.2.3.7.11.132.1,HP-ICF-OID::hpSwitchModuleJ9626A,,,,,,The authoritative identifier for the J9626A Fixed 48p 10/100 module.
.1.3.6.1.4.1.11.2.3.7.11.133,HP-ICF-OID::hpSwitchJ9627A,,,,,,The authoritative identifier for the J9627A HP 2620-48-PoE+ Switch.
.1.3.6.1.4.1.11.2.3.7.11.133.1,HP-ICF-OID::hpSwitchModuleJ9627A,,,,,,The authoritative identifier for the J9627A Fixed 48p PoEP 10/100 module.
.1.3.6.1.4.1.11.2.3.7.11.134,HP-ICF-OID::hpSwitchJ9660A,,,,,,The authoritative identifier for the J9660A HP 1810-48G Switch.
.1.3.6.1.4.1.11.2.3.7.11.136,HP-ICF-OID::hpSwitchJ9772A,,,,,,The authoritative identifier for the J9772A HP 2530-48G-PoE+ Switch.
.1.3.6.1.4.1.11.2.3.7.11.136.1,HP-ICF-OID::hpSwitchModuleJ9772A,,,,,,The authoritative identifier for the J9772A Fixed 48p PoEP 10/100/1000-T module.
.1.3.6.1.4.1.11.2.3.7.11.137,HP-ICF-OID::hpSwitchJ9773A,,,,,,The authoritative identifier for the J9773A HP 2530-24G-PoE+ Switch.
.1.3.6.1.4.1.11.2.3.7.11.137.1,HP-ICF-OID::hpSwitchModuleJ9773A,,,,,,The authoritative identifier for the J9773A Fixed 24p PoEP 10/100/1000-T module.
.1.3.6.1.4.1.11.2.3.7.11.138,HP-ICF-OID::hpSwitchJ9774A,,,,,,The authoritative identifier for the J9774A HP 2530-8G-PoE+ Switch.
.1.3.6.1.4.1.11.2.3.7.11.138.1,HP-ICF-OID::hpSwitchModuleJ9774A,,,,,,The authoritative identifier for the J9774A Fixed 8p PoEP 10/100/1000-T module.
.1.3.6.1.4.1.11.2.3.7.11.139,HP-ICF-OID::hpSwitchJ9775A,,,,,,The authoritative identifier for the J9775A HP 2530-48G Switch.
.1.3.6.1.4.1.11.2.3.7.11.139.1,HP-ICF-OID::hpSwitchModuleJ9775A,,,,,,The authoritative identifier for the J9775A Fixed 48p 10/100/1000-T module.
.1.3.6.1.4.1.11.2.3.7.11.140,HP-ICF-OID::hpSwitchJ9776A,,,,,,The authoritative identifier for the J9776A HP 2530-24G Switch.
.1.3.6.1.4.1.11.2.3.7.11.140.1,HP-ICF-OID::hpSwitchModuleJ9776A,,,,,,The authoritative identifier for the J9776A Fixed 24p 10/100/1000-T module.
.1.3.6.1.4.1.11.2.3.7.11.141,HP-ICF-OID::hpSwitchJ9777A,,,,,,The authoritative identifier for the J9777A HP 2530-8G Switch.
.1.3.6.1.4.1.11.2.3.7.11.141.1,HP-ICF-OID::hpSwitchModuleJ9777A,,,,,,The authoritative identifier for the J9777A Fixed 8p 10/100/1000-T module.
.1.3.6.1.4.1.11.2.3.7.11.142,HP-ICF-OID::hpSwitchJ9778A,,,,,,The authoritative identifier for the J9778A HP 2530-48-PoE+ Switch.
.1.3.6.1.4.1.11.2.3.7.11.142.1,HP-ICF-OID::hpSwitchModuleJ9778A,,,,,,The authoritative identifier for the J9778A Fixed 48p PoEP 10/100 module.
.1.3.6.1.4.1.11.2.3.7.11.143,HP-ICF-OID::hpSwitchJ9779A,,,,,,The authoritative identifier for the J9779A HP 2530-24-PoE+ Switch.
.1.3.6.1.4.1.11.2.3.7.11.143.1,HP-ICF-OID::hpSwitchModuleJ9779A,,,,,,The authoritative identifier for the J9779A Fixed 24p PoEP 10/100 module.
.1.3.6.1.4.1.11.2.3.7.11.144,HP-ICF-OID::hpSwitchJ9780A,,,,,,The authoritative identifier for the J9780A HP 2530-8-PoE+ Switch.
.1.3.6.1.4.1.11.2.3.7.11.144.1,HP-ICF-OID::hpSwitchModuleJ9780A,,,,,,The authoritative identifier for the J9779A Fixed 8p PoEP 10/100 module.
.1.3.6.1.4.1.11.2.3.7.11.145,HP-ICF-OID::hpSwitchJ9781A,,,,,,The authoritative identifier for the J9781A HP 2530-48 Switch.
.1.3.6.1.4.1.11.2.3.7.11.145.1,HP-ICF-OID::hpSwitchModuleJ9781A,,,,,,The authoritative identifier for the J9781A Fixed 48p 10/100 module.
.1.3.6.1.4.1.11.2.3.7.11.146,HP-ICF-OID::hpSwitchJ9782A,,,,,,The authoritative identifier for the J9782A HP 2530-24 Switch.
.1.3.6.1.4.1.11.2.3.7.11.146.1,HP-ICF-OID::hpSwitchModuleJ9782A,,,,,,The authoritative identifier for the J9782A Fixed 24p 10/100 module.
.1.3.6.1.4.1.11.2.3.7.11.147,HP-ICF-OID::hpSwitchJ9783A,,,,,,The authoritative identifier for the J9783A HP 2530-8 Switch.
.1.3.6.1.4.1.11.2.3.7.11.147.1,HP-ICF-OID::hpSwitchModuleJ9783A,,,,,,The authoritative identifier for the J9783A Fixed 8p 10/100 module.
.1.3.6.1.4.1.11.2.3.7.11.148,HP-ICF-OID::hpSwitchJ9800A,,,,,,The authoritative identifier for the J9800A HP 1810-8 Switch.
.1.3.6.1.4.1.11.2.3.7.11.149,HP-ICF-OID::hpSwitchJ9801A,,,,,,The authoritative identifier for the J9801A HP 1810-24 Switch.
.1.3.6.1.4.1.11.2.3.7.11.150,HP-ICF-OID::hpSwitchJ9802A,,,,,,The authoritative identifier for the J9802A HP 1810-8G Switch.
.1.3.6.1.4.1.11.2.3.7.11.151,HP-ICF-OID::hpSwitchJ9803A,,,,,,The authoritative identifier for the J9803A HP 1810-24G Switch.
.1.3.6.1.4.1.11.2.3.7.11.152,HP-ICF-OID::hpSwitchJ9726A,,,,,,The authoritative identifier for the J9726A HP 2920-24G Switch.
.1.3.6.1.4.1.11.2.3.7.11.152.1,HP-ICF-OID::hpSwitchModuleJ9726A,,,,,,The authoritative identifier for the J9726A Fixed 24G module.
.1.3.6.1.4.1.11.2.3.7.11.153,HP-ICF-OID::hpSwitchJ9727A,,,,,,The authoritative identifier for the J9727A HP 2920-24G-PoE+ Switch.
.1.3.6.1.4.1.11.2.3.7.11.153.1,HP-ICF-OID::hpSwitchModuleJ9727A,,,,,,The authoritative identifier for the J9727A Fixed 24G PoE+ module.
.1.3.6.1.4.1.11.2.3.7.11.154,HP-ICF-OID::hpSwitchJ9728A,,,,,,The authoritative identifier for the J9728A HP 2920-48G Switch.
.1.3.6.1.4.1.11.2.3.7.11.154.1,HP-ICF-OID::hpSwitchModuleJ9728A,,,,,,The authoritative identifier for the J9728A Fixed 48G module.
.1.3.6.1.4.1.11.2.3.7.11.155,HP-ICF-OID::hpSwitchJ9729A,,,,,,The authoritative identifier for the J9729A HP 2920-48G-PoE+ Switch.
.1.3.6.1.4.1.11.2.3.7.11.155.1,HP-ICF-OID::hpSwitchModuleJ9729A,,,,,,The authoritative identifier for the J9729A Fixed 48G POE+ module.
.1.3.6.1.4.1.11.2.3.7.11.155.2,HP-ICF-OID::hpSwitchModuleJ9730A,,,,,,The authoritative identifier for the HP J9730A 10-GbE 2-port CX4
.1.3.6.1.4.1.11.2.3.7.11.155.3,HP-ICF-OID::hpSwitchModuleJ9731A,,,,,,The authoritative identifier for the HP J9731A 10-GbE 2-port SFP+
.1.3.6.1.4.1.11.2.3.7.11.155.4,HP-ICF-OID::hpSwitchModuleJ9732A,,,,,,The authoritative identifier for the HP J9732A 10GBASE-T
.1.3.6.1.4.1.11.2.3.7.11.155.5,HP-ICF-OID::hpSwitchModuleJ9733A,,,,,,The authoritative identifier for the HP J9733A 2 Port Stacking
.1.3.6.1.4.1.11.2.3.7.11.158,HP-ICF-OID::hpSwitchJ9833A,,,,,,The authoritative identifier for the J9833A HP PS1810-8G Switch.
.1.3.6.1.4.1.11.2.3.7.11.159,HP-ICF-OID::hpSwitchJ9834A,,,,,,The authoritative identifier for the J9834A HP PS1810-24G Switch.
.1.3.6.1.4.1.11.2.3.7.11.160,HP-ICF-OID::hpSwitchJ9850A,,,,,,The authoritative identifier for the J9850A HP 5406R zl2 Switch Chassis.
.1.3.6.1.4.1.11.2.3.7.11.160.1,HP-ICF-OID::hpSwitchModuleJ9827A,,,,,,The authoritative identifier for the J9827A HP 5400R zl2 Switch Management Module
.1.3.6.1.4.1.11.2.3.7.11.160.2,HP-ICF-OID::hpSwitchModuleJ9986A,,,,,,The authoritative identifier for the J9986A HP 24-port 10/100/1000BASE-T PoE+ MACsec v3 zl2 Module
.1.3.6.1.4.1.11.2.3.7.11.160.3,HP-ICF-OID::hpSwitchModuleJ9987A,,,,,,The authoritative identifier for the J9987A HP 24-port 10/100/1000BASE-T MACsec v3 zl2 Module
.1.3.6.1.4.1.11.2.3.7.11.160.4,HP-ICF-OID::hpSwitchModuleJ9988A,,,,,,The authoritative identifier for the J9988A HP 24-port 1GbE SFP MACsec v3 zl2 Module
.1.3.6.1.4.1.11.2.3.7.11.160.5,HP-ICF-OID::hpSwitchModuleJ9989A,,,,,,The authoritative identifier for the J9989A HP 12-port 10/100/1000BASE-T PoE+ / 12-port 1GbE SFP MACsec v3 zl2 Module
.1.3.6.1.4.1.11.2.3.7.11.160.6,HP-ICF-OID::hpSwitchModuleJ9990A,,,,,,The authoritative identifier for the J9990A HP 20-port 10/100/1000BASE-T PoE+ / 4-port 1G/10GbE SFP+ MACsec v3 zl2 Module
.1.3.6.1.4.1.11.2.3.7.11.160.7,HP-ICF-OID::hpSwitchModuleJ9991A,,,,,,The authoritative identifier for the J9991A HP 20-port 10/100/1000BASE-T PoE+ / 4-port 1/2.5/5/10GBASE-T PoE+ MACsec v3 zl2 Module
.1.3.6.1.4.1.11.2.3.7.11.160.8,HP-ICF-OID::hpSwitchModuleJ9992A,,,,,,The authoritative identifier for the J9992A HP 20-port 10/100/1000BASE-T PoE+ MACsec / 1-port 40GbE QSFP+ v3 zl2 Module
.1.3.6.1.4.1.11.2.3.7.11.160.9,HP-ICF-OID::hpSwitchModuleJ9993A,,,,,,The authoritative identifier for the J9993A HP 8-port 1G/10GbE SFP+ MACsec v3 zl2 Module
.1.3.6.1.4.1.11.2.3.7.11.160.10,HP-ICF-OID::hpSwitchModuleJ9995A,,,,,,The authoritative identifier for the J9995A HP 8-port 1/2.5/5/10GBASE-T PoE+ MACsec v3 zl2 Module
.1.3.6.1.4.1.11.2.3.7.11.160.11,HP-ICF-OID::hpSwitchModuleJ9996A,,,,,,The authoritative identifier for the J9996A HP 2-port 40GbE QSFP+ v3 zl2 Module
.1.3.6.1.4.1.11.2.3.7.11.161,HP-ICF-OID::hpSwitchJ9851A,,,,,,The authoritative identifier for the J9851A HP 5412R zl2 Switch Chassis.
.1.3.6.1.4.1.11.2.3.7.11.163,HP-ICF-OID::hpSwitchJ9853A,,,,,,The authoritative identifier for the J9853A HP 2530-48G-PoE+-2SFP+ Switch.
.1.3.6.1.4.1.11.2.3.7.11.163.1,HP-ICF-OID::hpSwitchModuleJ9853A,,,,,,The authoritative identifier for the J9853A Fixed 48p PoEP 10/100/1000-T 2SFP+ module.
.1.3.6.1.4.1.11.2.3.7.11.164,HP-ICF-OID::hpSwitchJ9854A,,,,,,The authoritative identifier for the J9854A HP 2530-24G-PoE+-2SFP+ Switch.
.1.3.6.1.4.1.11.2.3.7.11.164.1,HP-ICF-OID::hpSwitchModuleJ9854A,,,,,,The authoritative identifier for the J9854A Fixed 24p PoEP 10/100/1000-T 2SFP+ module.
.1.3.6.1.4.1.11.2.3.7.11.165,HP-ICF-OID::hpSwitchJ9855A,,,,,,The authoritative identifier for the J9855A HP 2530-48G-2SFP+ Switch.
.1.3.6.1.4.1.11.2.3.7.11.165.1,HP-ICF-OID::hpSwitchModuleJ9855A,,,,,,The authoritative identifier for the J9855A Fixed 48p 10/100/1000-T 2SFP+ module.
.1.3.6.1.4.1.11.2.3.7.11.166,HP-ICF-OID::hpSwitchJ9856A,,,,,,The authoritative identifier for the J9856A HP 2530-24G-2SFP+ Switch.
.1.3.6.1.4.1.11.2.3.7.11.166.1,HP-ICF-OID::hpSwitchModuleJ9856A,,,,,,The authoritative identifier for the J9856A Fixed 24p 10/100/1000-T 2SFP+ module.
.1.3.6.1.4.1.11.2.3.7.11.167,HP-ICF-OID::hpSwitchJ9979A,,,,,,The authoritative identifier for the J9979A HP 1820-8G Switch.
.1.3.6.1.4.1.11.2.3.7.11.168,HP-ICF-OID::hpSwitchJ9980A,,,,,,The authoritative identifier for the J9980A HP 1820-24G Switch.
.1.3.6.1.4.1.11.2.3.7.11.169,HP-ICF-OID::hpSwitchJ9981A,,,,,,The authoritative identifier for the J9981A HP 1820-48G Switch.
.1.3.6.1.4.1.11.2.3.7.11.170,HP-ICF-OID::hpSwitchJ9982A,,,,,,The authoritative identifier for the J9982A HP 1820-8G-PoE+ (65W) Switch.
.1.3.6.1.4.1.11.2.3.7.11.171,HP-ICF-OID::hpSwitchJ9983A,,,,,,The authoritative identifier for the J9983A HP 1820-24G-PoE+ (185W) Switch.
.1.3.6.1.4.1.11.2.3.7.11.172,HP-ICF-OID::hpSwitchJ9984A,,,,,,The authoritative identifier for the J9984A HP 1820-48G-PoE+ (370W) Switch.
.1.3.6.1.4.1.11.2.3.7.11.173,HP-ICF-OID::hpSwitchJL070A,,,,,,The authoritative identifier for the JL070A HP 2530-8-PoE+ Internal PS Switch.
.1.3.6.1.4.1.11.2.3.7.11.173.1,HP-ICF-OID::hpSwitchModuleJL070A,,,,,,The authoritative identifier for the JL070A Fixed 8p PoEP Internal PS 10/100 module.
.1.3.6.1.4.1.11.2.3.7.11.174,HP-ICF-OID::aruba3810,,,,,,Device OID branch for the Aruba 3810 Switch family.
.1.3.6.1.4.1.11.2.3.7.11.174.1,HP-ICF-OID::arubaJL071A,,,,,,The authoritative identifier for the JL071A Aruba 3810M 24G 1-slot Switch.
.1.3.6.1.4.1.11.2.3.7.11.174.1.1,HP-ICF-OID::arubaJL071AModule,,,,,,The authoritative identifier for the JL071A Aruba 3810M 24G 1-slot Module.
.1.3.6.1.4.1.11.2.3.7.11.174.2,HP-ICF-OID::arubaJL072A,,,,,,The authoritative identifier for the JL072A Aruba 3810M 48G 1-slot Switch.
.1.3.6.1.4.1.11.2.3.7.11.174.2.1,HP-ICF-OID::arubaJL072AModule,,,,,,The authoritative identifier for the JL072A Aruba 3810M 48G 1-slot Module.
.1.3.6.1.4.1.11.2.3.7.11.174.3,HP-ICF-OID::arubaJL073A,,,,,,The authoritative identifier for the JL073A Aruba 3810M 24G PoE+ 1-slot Switch.
.1.3.6.1.4.1.11.2.3.7.11.174.3.1,HP-ICF-OID::arubaJL073AModule,,,,,,The authoritative identifier for the JL073A Aruba 3810M 24G PoE+ 1-slot Module.
.1.3.6.1.4.1.11.2.3.7.11.174.4,HP-ICF-OID::arubaJL074A,,,,,,The authoritative identifier for the JL074A Aruba 3810M 48G PoE+ 1-slot Switch.
.1.3.6.1.4.1.11.2.3.7.11.174.4.1,HP-ICF-OID::arubaJL074AModule,,,,,,The authoritative identifier for the JL074A Aruba 3810M 48G PoE+ 1-slot Module.
.1.3.6.1.4.1.11.2.3.7.11.174.5,HP-ICF-OID::arubaJL075A,,,,,,The authoritative identifier for the JL075A Aruba 3810M 16SFP+ 2-slot Switch.
.1.3.6.1.4.1.11.2.3.7.11.174.5.1,HP-ICF-OID::arubaJL075AModule,,,,,,The authoritative identifier for the JL075A Aruba 3810M 16SFP+ 2-slot Module.
.1.3.6.1.4.1.11.2.3.7.11.174.6,HP-ICF-OID::arubaJL076A,,,,,,The authoritative identifier for the JL076A Aruba 3810M 40G 8 HPE Smart Rate PoE+ 1-slot Switch.
.1.3.6.1.4.1.11.2.3.7.11.174.6.1,HP-ICF-OID::arubaJL076AModule,,,,,,The authoritative identifier for the JL076A Aruba 3810M 20G 8 HPE Smart Rate PoE+ 1-slot Module.
.1.3.6.1.4.1.11.2.3.7.11.174.7,HP-ICF-OID::arubaJL077A,,,,,,The authoritative identifier for the JL077A Aruba 3810M 16 HPE Smart Rate PoE+ 2-slot Switch.
.1.3.6.1.4.1.11.2.3.7.11.174.7.1,HP-ICF-OID::arubaJL077AModule,,,,,,The authoritative identifier for the JL077A Aruba 3810M 16 HPE Smart Rate PoE+ 2-slot Module.
.1.3.6.1.4.1.11.2.3.7.11.174.8,HP-ICF-OID::arubaJL084AStackingModule,,,,,,The authoritative identifier for the Aruba 3810M 4-port Stacking Module.
.1.3.6.1.4.1.11.2.3.7.11.174.9,HP-ICF-OID::arubaJL088AFanTray,,,,,,The authoritative identifier for the Aruba 3810 Switch Fan Tray.
.1.3.6.1.4.1.11.2.3.7.11.180,HP-ICF-OID::arubaFPModule,,,,,,Device OID branch for the flexible port modules used by the Aruba 3810 Switch family and others.
.1.3.6.1.4.1.11.2.3.7.11.180.1,HP-ICF-OID::arubaFPModuleJL078A,,,,,,The authoritative identifier for the Aruba 1QSFP+ 40GbE Module.
.1.3.6.1.4.1.11.2.3.7.11.180.2,HP-ICF-OID::arubaFPModuleJL079A,,,,,,The authoritative identifier for the Aruba 2QSFP+ 40GbE Module.
.1.3.6.1.4.1.11.2.3.7.11.180.3,HP-ICF-OID::arubaFPModuleJL080A,,,,,,The authoritative identifier for the Aruba 2 HPE Smart Rate PoE+ Module.
.1.3.6.1.4.1.11.2.3.7.11.180.4,HP-ICF-OID::arubaFPModuleJL081A,,,,,,The authoritative identifier for the Aruba 4 HPE Smart Rate PoE+ Module.
.1.3.6.1.4.1.11.2.3.7.11.180.5,HP-ICF-OID::arubaFPModuleJL082A,,,,,,The authoritative identifier for the Aruba 2SFP+ Module.
.1.3.6.1.4.1.11.2.3.7.11.180.6,HP-ICF-OID::arubaFPModuleJL083A,,,,,,The authoritative identifier for the Aruba 4SFP+ Module.
.1.3.6.1.4.1.11.2.3.7.11.181,HP-ICF-OID::arubaSwitch2930,,,,,,Device OID branch for the Aruba 2930 Switch family.
.1.3.6.1.4.1.11.2.3.7.11.181.1,HP-ICF-OID::arubaStackingModuleJL325A,,,,,,The authoritative identifier for the Aruba 2930M 2 port Stacking Module.
.1.3.6.1.4.1.11.2.3.7.11.181.2,HP-ICF-OID::arubaSwitchJL319A,,,,,,The authoritative identifier for the Aruba 2930M-24G Switch.
.1.3.6.1.4.1.11.2.3.7.11.181.2.1,HP-ICF-OID::arubaModuleJL319A,,,,,,The authoritative identifier for the Aruba 2930M-24G module.
.1.3.6.1.4.1.11.2.3.7.11.181.3,HP-ICF-OID::arubaSwitchJL321A,,,,,,The authoritative identifier for the Aruba 2930M-48G Switch.
.1.3.6.1.4.1.11.2.3.7.11.181.3.1,HP-ICF-OID::arubaModuleJL321A,,,,,,The authoritative identifier for the Aruba 2930M-48G module.
.1.3.6.1.4.1.11.2.3.7.11.181.4,HP-ICF-OID::arubaSwitchJL320A,,,,,,The authoritative identifier for the Aruba 2930M-24G-PoE+ Switch.
.1.3.6.1.4.1.11.2.3.7.11.181.4.1,HP-ICF-OID::arubaModuleJL320A,,,,,,The authoritative identifier for the Aruba 2930M-24G-PoE+ module.
.1.3.6.1.4.1.11.2.3.7.11.181.5,HP-ICF-OID::arubaSwitchJL322A,,,,,,The authoritative identifier for the Aruba 2930M-48G-PoE+ Switch.
.1.3.6.1.4.1.11.2.3.7.11.181.5.1,HP-ICF-OID::arubaModuleJL322A,,,,,,The authoritative identifier for the Aruba 2930M-48G-PoE+ module.
.1.3.6.1.4.1.11.2.3.7.11.181.6,HP-ICF-OID::arubaSwitchJL324A,,,,,,The authoritative identifier for the Aruba 2930M-24SR-PoE+ Switch.
.1.3.6.1.4.1.11.2.3.7.11.181.6.1,HP-ICF-OID::arubaModuleJL324A,,,,,,The authoritative identifier for the Aruba 2930M-24SR-PoE+ module.
.1.3.6.1.4.1.11.2.3.7.11.181.9,HP-ICF-OID::arubaSwitchJL323A,,,,,,The authoritative identifier for the Aruba 2930M-40G-8SR-PoE+ Switch.
.1.3.6.1.4.1.11.2.3.7.11.181.9.1,HP-ICF-OID::arubaModuleJL323A,,,,,,The authoritative identifier for the Aruba 2930M-40G-8SR-PoE+ module.
.1.3.6.1.4.1.11.2.3.7.11.181.16,HP-ICF-OID::arubaSwitchJL258A,,,,,,The authoritative identifier for the Aruba 2930F-8G-PoE+-2SFP+ Switch.
.1.3.6.1.4.1.11.2.3.7.11.181.16.1,HP-ICF-OID::arubaModuleJL258A,,,,,,The authoritative identifier for the Aruba 2930F-8G-PoE+-2SFP+ module.
.1.3.6.1.4.1.11.2.3.7.11.181.18,HP-ICF-OID::arubaSwitchJL253A,,,,,,The authoritative identifier for the Aruba 2930F-24G-4SFP+ Switch.
.1.3.6.1.4.1.11.2.3.7.11.181.18.1,HP-ICF-OID::arubaModuleJL253A,,,,,,The authoritative identifier for the Aruba 2930F-24G-4SFP+ module.
.1.3.6.1.4.1.11.2.3.7.11.181.19,HP-ICF-OID::arubaSwitchJL254A,,,,,,The authoritative identifier for the Aruba 2930F-48G-4SFP+ Switch.
.1.3.6.1.4.1.11.2.3.7.11.181.19.1,HP-ICF-OID::arubaModuleJL254A,,,,,,The authoritative identifier for the Aruba 2930F-48G-4SFP+ module.
.1.3.6.1.4.1.11.2.3.7.11.181.20,HP-ICF-OID::arubaSwitchJL255A,,,,,,The authoritative identifier for the Aruba 2930F-24G-PoE+-4SFP+ Switch.
.1.3.6.1.4.1.11.2.3.7.11.181.20.1,HP-ICF-OID::arubaModuleJL255A,,,,,,The authoritative identifier for the Aruba 2930F-24G-PoE+-4SFP+ module.
.1.3.6.1.4.1.11.2.3.7.11.181.21,HP-ICF-OID::arubaSwitchJL256A,,,,,,The authoritative identifier for the Aruba 2930F-48G-PoE+-4SFP+ Switch.
.1.3.6.1.4.1.11.2.3.7.11.181.21.1,HP-ICF-OID::arubaModuleJL256A,,,,,,The authoritative identifier for the Aruba 2930F-48G-PoE+-4SFP+ module.
.1.3.6.1.4.1.11.2.3.7.11.181.22,HP-ICF-OID::arubaSwitchJL259A,,,,,,The authoritative identifier for the Aruba 2930F-24G-4SFP Switch.
.1.3.6.1.4.1.11.2.3.7.11.181.22.1,HP-ICF-OID::arubaModuleJL259A,,,,,,The authoritative identifier for the Aruba 2930F-24G-4SFP module.
.1.3.6.1.4.1.11.2.3.7.11.181.23,HP-ICF-OID::arubaSwitchJL260A,,,,,,The authoritative identifier for the Aruba 2930F-48G-4SFP Switch.
.1.3.6.1.4.1.11.2.3.7.11.181.23.1,HP-ICF-OID::arubaModuleJL260A,,,,,,The authoritative identifier for the Aruba 2930F-48G-4SFP module.
.1.3.6.1.4.1.11.2.3.7.11.181.24,HP-ICF-OID::arubaSwitchJL261A,,,,,,The authoritative identifier for the Aruba 2930F-24G-PoE+-4SFP Switch.
.1.3.6.1.4.1.11.2.3.7.11.181.24.1,HP-ICF-OID::arubaModuleJL261A,,,,,,The authoritative identifier for the Aruba 2930F-24G-PoE+-4SFP module.
.1.3.6.1.4.1.11.2.3.7.11.181.25,HP-ICF-OID::arubaSwitchJL262A,,,,,,The authoritative identifier for the Aruba 2930F-48G-PoE+-4SFP Switch.
.1.3.6.1.4.1.11.2.3.7.11.181.25.1,HP-ICF-OID::arubaModuleJL262A,,,,,,The authoritative identifier for the Aruba 2930F-48G-PoE+-4SFP module.
.1.3.6.1.4.1.11.2.3.7.11.181.26,HP-ICF-OID::arubaSwitchJL558A,,,,,,The authoritative identifier for the Aruba 2930F 48G 740W PoE+ 4SPF+ Switch.
.1.3.6.1.4.1.11.2.3.7.11.181.26.1,HP-ICF-OID::arubaModuleJL558A,,,,,,The authoritative identifier for the Aruba 2930F 48G 740W PoE+ 4SPF+ module.
.1.3.6.1.4.1.11.2.3.7.11.181.27,HP-ICF-OID::arubaSwitchJL557A,,,,,,The authoritative identifier for the Aruba 2930F 48G 740W PoE+ 4SPF Switch.
.1.3.6.1.4.1.11.2.3.7.11.181.27.1,HP-ICF-OID::arubaModuleJL557A,,,,,,The authoritative identifier for the Aruba 2930F 48G 740W PoE+ 4SPF module.
.1.3.6.1.4.1.11.2.3.7.11.181.28,HP-ICF-OID::arubaSwitchR0M67A,,,,,,The authoritative identifier for the Aruba 2930M-40G-8SR-PoE-Class6 Switch.
.1.3.6.1.4.1.11.2.3.7.11.181.28.1,HP-ICF-OID::arubaModuleR0M67A,,,,,,The authoritative identifier for the Aruba 2930M-40G-8SR-PoE-Class6 Switch.
.1.3.6.1.4.1.11.2.3.7.11.181.29,HP-ICF-OID::arubaSwitchR0M68A,,,,,,The authoritative identifier for the Aruba 2930M-24SR-PoE-Class6 Switch.
.1.3.6.1.4.1.11.2.3.7.11.181.29.1,HP-ICF-OID::arubaModuleR0M68A,,,,,,The authoritative identifier for the Aruba 2930M-24SR-PoE-Class6 Switch.
.1.3.6.1.4.1.11.2.3.7.11.181.272,HP-ICF-OID::arubaSwitchJL692A,,,,,,The authoritative identifier for the Aruba 2930F-8G-PoE+-2SFP+-TAA Switch.
.1.3.6.1.4.1.11.2.3.7.11.181.272.1,HP-ICF-OID::arubaModuleJL692A,,,,,,The authoritative identifier for the Aruba 2930F-8G-PoE+-2SFP+-TAA module.
.1.3.6.1.4.1.11.2.3.7.11.181.276,HP-ICF-OID::arubaSwitchJL263A,,,,,,The authoritative identifier for the Aruba 2930F-24G-PoE+-4SFP+-TAA Switch.
.1.3.6.1.4.1.11.2.3.7.11.181.276.1,HP-ICF-OID::arubaModuleJL263A,,,,,,The authoritative identifier for the Aruba 2930F-24G-PoE+-4SFP+-TAA module.
.1.3.6.1.4.1.11.2.3.7.11.181.277,HP-ICF-OID::arubaSwitchJL264A,,,,,,The authoritative identifier for the Aruba 2930F-48G-PoE+-4SFP+-TAA Switch.
.1.3.6.1.4.1.11.2.3.7.11.181.277.1,HP-ICF-OID::arubaModuleJL264A,,,,,,The authoritative identifier for the Aruba 2930F-48G-PoE+-4SFP+-TAA module.
.1.3.6.1.4.1.11.2.3.7.11.181.282,HP-ICF-OID::arubaSwitchJL559A,,,,,,The authoritative identifier for the Aruba 2930F 48G 740W PoE+ 4SPF+ TAA Switch.
.1.3.6.1.4.1.11.2.3.7.11.181.282.1,HP-ICF-OID::arubaModuleJL559A,,,,,,The authoritative identifier for the Aruba 2930F 48G 740W PoE+ 4SPF+ TAA module.
.1.3.6.1.4.1.11.2.3.7.11.182,HP-ICF-OID::arubaSwitch2540,,,,,,Device OID branch for the Aruba 2540 Switch family.
.1.3.6.1.4.1.11.2.3.7.11.182.18,HP-ICF-OID::arubaSwitchJL354A,,,,,,The authoritative identifier for the Aruba 2540-24G-4SFP+ Switch.
.1.3.6.1.4.1.11.2.3.7.11.182.18.1,HP-ICF-OID::arubaModuleJL354A,,,,,,The authoritative identifier for the Aruba 2540-24G-4SFP+ module.
.1.3.6.1.4.1.11.2.3.7.11.182.19,HP-ICF-OID::arubaSwitchJL355A,,,,,,The authoritative identifier for the Aruba 2540-48G-4SFP+ Switch.
.1.3.6.1.4.1.11.2.3.7.11.182.19.1,HP-ICF-OID::arubaModuleJL355A,,,,,,The authoritative identifier for the Aruba 2540-48G-4SFP+ module.
.1.3.6.1.4.1.11.2.3.7.11.182.20,HP-ICF-OID::arubaSwitchJL356A,,,,,,The authoritative identifier for the Aruba 2540-24G-PoE+-4SFP+ Switch.
.1.3.6.1.4.1.11.2.3.7.11.182.20.1,HP-ICF-OID::arubaModuleJL356A,,,,,,The authoritative identifier for the Aruba 2540-24G-PoE+-4SFP+ module.
.1.3.6.1.4.1.11.2.3.7.11.182.21,HP-ICF-OID::arubaSwitchJL357A,,,,,,The authoritative identifier for the Aruba 2540-48G-PoE+-4SFP+ Switch.
.1.3.6.1.4.1.11.2.3.7.11.182.21.1,HP-ICF-OID::arubaModuleJL357A,,,,,,The authoritative identifier for the Aruba 2540-48G-PoE+-4SFP+ module.
.1.3.6.1.4.1.11.2.3.7.15,HPN-ICF-PRODUCT-ID-MIB::hpn,,,,,,
.1.3.6.1.4.1.11.2.3.7.15.1,HPN-ICF-PRODUCT-ID-MIB::hpnProducts,,,,,,
.1.3.6.1.4.1.11.2.3.7.15.1.1,HPN-ICF-PRODUCT-ID-MIB::hpnSwitch,,,,,,
.1.3.6.1.4.1.11.2.3.7.15.1.2,HPN-ICF-PRODUCT-ID-MIB::hpnRouter,,,,,,
.1.3.6.1.4.1.11.2.3.7.15.1.3,HPN-ICF-PRODUCT-ID-MIB::hpnWireless,,,,,,
.1.3.6.1.4.1.11.2.3.7.15.1.3.1,HPN-ICF-PRODUCT-ID-MIB::hpnLSU3WCMD0,,,,,,
.1.3.6.1.4.1.11.2.3.7.15.1.3.2,HPN-ICF-PRODUCT-ID-MIB::hpn83024P,,,,,,
.1.3.6.1.4.1.11.2.3.7.15.1.3.3,HPN-ICF-PRODUCT-ID-MIB::hpn83024PLSW,,,,,,
.1.3.6.1.4.1.11.2.3.7.15.1.3.4,HPN-ICF-PRODUCT-ID-MIB::hpn8308P,,,,,,
.1.3.6.1.4.1.11.2.3.7.15.1.3.5,HPN-ICF-PRODUCT-ID-MIB::hpn8308PLSW,,,,,,
.1.3.6.1.4.1.11.2.3.7.15.1.3.6,HPN-ICF-PRODUCT-ID-MIB::hpnLSU3WCMD0TAA,,,,,,
.1.3.6.1.4.1.11.2.3.7.15.1.3.7,HPN-ICF-PRODUCT-ID-MIB::hpn83024PTAA,,,,,,
.1.3.6.1.4.1.11.2.3.7.15.1.3.8,HPN-ICF-PRODUCT-ID-MIB::hpn83024PTAALSW,,,,,,
.1.3.6.1.4.1.11.2.3.7.15.1.3.9,HPN-ICF-PRODUCT-ID-MIB::hpn8308PTAA,,,,,,
.1.3.6.1.4.1.11.2.3.7.15.1.3.10,HPN-ICF-PRODUCT-ID-MIB::hpn8308PTAALSW,,,,,,
.1.3.6.1.4.1.11.2.3.7.15.1.3.11,HPN-ICF-PRODUCT-ID-MIB::hpn870WCM,,,,,,
.1.3.6.1.4.1.11.2.3.7.15.1.3.12,HPN-ICF-PRODUCT-ID-MIB::hpn870LSW,,,,,,
.1.3.6.1.4.1.11.2.3.7.15.1.3.13,HPN-ICF-PRODUCT-ID-MIB::hpn850,,,,,,
.1.3.6.1.4.1.11.2.3.7.15.1.3.14,HPN-ICF-PRODUCT-ID-MIB::hpn870TAAWCM,,,,,,
.1.3.6.1.4.1.11.2.3.7.15.1.3.15,HPN-ICF-PRODUCT-ID-MIB::hpn870TAALSW,,,,,,
.1.3.6.1.4.1.11.2.3.7.15.1.3.16,HPN-ICF-PRODUCT-ID-MIB::hpn850TAA,,,,,,
.1.3.6.1.4.1.11.2.3.7.15.1.4,HPN-ICF-PRODUCT-ID-MIB::hpnSecurity,,,,,,
.1.3.6.1.4.1.11.2.14,HP-ICF-OID::icf,,,,,,This MIB module describes devices in the HP Integrated Communication Facility product line.
.1.3.6.1.4.1.11.2.14.1,HP-ICF-OID::icfCommon,,,,,,
.1.3.6.1.4.1.11.2.14.1.1,ICF-ETWIST::lastSetError,INTEGER,read-only,,obsolete,unexpectedError(100):resourceLimitExceeded(101):disallowedSTPPortState(102):incompleteSetlet(103):invalidEventObject(104):disallowedRemoteDevice(105):disallowedLAPBAdrsPair(106):adrsAlreadyPresent(107):staticSectionFull(108):cantDeletePermAdrs(109):inconsistentValues(110):downloadInProgress(111),********* THIS OBJECT IS OBSOLETE ********* Provide more detailed, enterprise specific error type. Any error resulting from a SET request will cause this object to be updated, and the previous value overwritten. A management entity may retrieve more detailed error information than that implied by the pdu's ErrorStatus, especially in  the case of a genErr.
.1.3.6.1.4.1.11.2.14.1.2,ICF-ETWIST::password,OCTET,read-write,,obsolete,,********* THIS OBJECT IS OBSOLETE ********* This is the encrypted password for the device. The  algorithm used for the encryption process is HP  proprietary. Third party vendor support is provided by not setting a password on the device, and using the community name 'public'.
.1.3.6.1.4.1.11.2.14.1.3,ICF-ETWIST::reset,Integer32,read-write,,obsolete,,********* THIS OBJECT IS OBSOLETE ********* When the reset object is set to to 'warm' it  results in a 'warm' reset, which does not clear  the parameters in NOVRAM to factory defaults. When set to 'cold', it results in NOVRAM being set to factory defaults. When this object is set, the  agent replies, dallies a short time to allow the  reply to be emitted from the device, then performs the reset. When read, this object always returns  0.
.1.3.6.1.4.1.11.2.14.1.4,ICF-ETWIST::selfTest,Integer32,read-write,,obsolete,,********* THIS OBJECT IS OBSOLETE ********* Self test is invoked by setting this flag to  'stExecute. When the object changes to  'stSuccess', the test has completed successfully. Icf devices will 'hard-fail' if the test does not succeed.
.1.3.6.1.4.1.11.2.14.1.5,ICF-ETWIST::semaphore,IpAddress,read-write,,obsolete,,********* THIS OBJECT IS OBSOLETE ********* This object allows a set of objects to be locked. The lock is only assured by the 'cooperation' of  other management entities; they must wait until  the lock is cleared (to value zero) prior to  setting the lock. When this object is set to a  management entity's IP address, if no other  management entity has previously set the lock, the set will succeed. Otherwise, an error (BadValue)  will be returned. It is the responsibility of the owning management entity to clear the lock when  the transactions complete. To protect against a  management entity failure during a locked  transaction, the agent is NOT responsible for  verifying which management entity is performing  transactions on locked objects; thus, any  management entity can clear this object at any  time. The agent does not do anything with this  object except disallow multiple sets of different IP addresses (unless the object has been cleared  to zero). This means management entities can use  this for locking any valid transactions on defined sets of objects. This object can also be used on IPX networks by specifying the low 4 bytes of the station address for the IpAddress.
.1.3.6.1.4.1.11.2.14.1.6,ICF-ETWIST::discovery,,,,,,
.1.3.6.1.4.1.11.2.14.1.6.1,ICF-ETWIST::pollResponse,Integer32,read-write,,obsolete,,********* THIS OBJECT IS OBSOLETE ********* Flag indicating whether device should respond to  multicast SNMP PDUs. When set 'true', the device  will respond to multicast SNMP PDU's. Otherwise,  the response is discarded.
.1.3.6.1.4.1.11.2.14.1.6.2,ICF-ETWIST::announceAddress,OCTET,read-write,,obsolete,,********* THIS OBJECT IS OBSOLETE ********* When set to any MAC address, the device will transmit three identical packets, each with the MAC source set to the device's MAC address, the MAC destination to the value of this object, the destination SAP is F8, and the destination HP XSAP is 165D. These packets will traverse other ICF devices, allowing them to learn the port connectivity of the transmitting device.
.1.3.6.1.4.1.11.2.14.1.6.3,ICF-ETWIST::mapAddress,OCTET,read-write,,obsolete,,********* THIS OBJECT IS OBSOLETE ********* When this object is set a map address search  begins. If the address is detected on only one  port, then the mapPort object is set to the port  number on which the address was detected. This object is obsolete. This functionality has now been incorporated into the IETF 802.3 Repeater MIB. Agents and management applications should implement that MIB.
.1.3.6.1.4.1.11.2.14.1.6.4,ICF-ETWIST::mapState,Integer32,read-only,,obsolete,,********* THIS OBJECT IS OBSOLETE ********* This object will be set to 'psNone' if the  address set in the mapAddress object has not been received on any of the device's interface/ports. It will be set to 'psSingle' if the mapAddress has been detected on only one interface/port. It will be set to 'psMany' if the mapAddress has been  detected on more than one interface/port. This object is obsolete. This functionality has now been incorporated into the IETF 802.3 Repeater MIB. Agents and management applications should implement that MIB.
.1.3.6.1.4.1.11.2.14.1.6.5,ICF-ETWIST::mapPort,Integer32,read-only,,obsolete,,********* THIS OBJECT IS OBSOLETE ********* The port number on which the map address was  detected. If map state is 'psNone' or 'psMany' then this object is not valid. This object is obsolete. This functionality has now been incorporated into the IETF 802.3 Repeater MIB. Agents and management applications should implement that MIB.
.1.3.6.1.4.1.11.2.14.1.6.6,ICF-ETWIST::ipSubnetMask,IpAddress,read-only,,obsolete,,********* THIS OBJECT IS OBSOLETE ********* This object is the IP subnet mask.
.1.3.6.1.4.1.11.2.14.1.7,ICF-ETWIST::icfEvent,,,,,,
.1.3.6.1.4.1.11.2.14.1.7.1,ICF-ETWIST::eventNotificationNode,,,,,,
.1.3.6.1.4.1.11.2.14.1.7.1.1,ICF-ETWIST::evtIpNotify,IpAddress,read-write,,obsolete,,********* THIS OBJECT IS OBSOLETE ********* The network address of the manager node which is to receive the event notification trap.
.1.3.6.1.4.1.11.2.14.1.7.1.2,ICF-ETWIST::evtIpxNotify,OCTET,read-write,,obsolete,,********* THIS OBJECT IS OBSOLETE ********* The IPX address of the manager node which is to receive the event notification trap.
.1.3.6.1.4.1.11.2.14.1.7.2,ICF-ETWIST::evtTable,,not-accessible,,obsolete,,********* THIS OBJECT IS OBSOLETE ********* A list of event entries for event processing.
.1.3.6.1.4.1.11.2.14.1.7.2.1,ICF-ETWIST::evtIndex,INTEGER,read-only,,obsolete,warmStartEvent(1):coldStartEvent(2):spanTreeOrLinkBeatEvent(3):temperatureOrSegmentationEvent(4):backupLinkEvent(5):intrusionEvent(6):addressMovedEvent(7):newAddressEvent(8):rptrHealthEvent(9):rptrResetEvent(10),********* THIS OBJECT IS OBSOLETE ********* The index value which uniquely identifies the event to which this entry is applicable.
.1.3.6.1.4.1.11.2.14.1.7.2.2,ICF-ETWIST::evtArm,Integer32,read-write,,obsolete,,********* THIS OBJECT IS OBSOLETE ********* This object arms and disarms events. Events are  implicitly rearmed, that is, once an event occurs, it is rearmed. Sets to the intrusionEvent  instance of this object are ignored, since  intrusion events are actually armed through the  hubSecPtAlarmEnable object.
.1.3.6.1.4.1.11.2.14.1.7.2.3,ICF-ETWIST::evtTimeSinceOccurrence,TimeTicks,read-only,,obsolete,,********* THIS OBJECT IS OBSOLETE ********* This object specifies the number of centiseconds since this event last occurred.
.1.3.6.1.4.1.11.2.14.1.7.3,ICF-ETWIST::evtThresholdTable,,not-accessible,,obsolete,,********* THIS OBJECT IS OBSOLETE ********* A list of event entries for event processing.
.1.3.6.1.4.1.11.2.14.1.7.3.1,ICF-ETWIST::evthIndex,Integer32,read-only,,obsolete,,********* THIS OBJECT IS OBSOLETE ********* The index value which uniquely identifies the event to which this entry is applicable.
.1.3.6.1.4.1.11.2.14.1.7.3.2,ICF-ETWIST::evthArm,Integer32,read-write,,obsolete,,********* THIS OBJECT IS OBSOLETE ********* This object arms and disarms events. The  notification node, the associated event object, threshold, hysteresis, and time interval should all be set before an event is armed. The objects do not need to be re-set if the existing values are acceptable. The device will refuse to arm an event with uninitialized objects. Once armed, if the threshold is met or exceeded during the event time interval, a trap PDU is sent to the eventNotificationNode. Subsequently, the monitored object must fall to or below the hysteresis before another trap can be sent via the threshold mechanism. The hysteresis may equal threshold. Events are implicitly rearmed, that is, once an event occurs, it is rearmed. Setting this object to 'on' will result in a genErr in any of the following cases: object not set; cannot set an event on this object; time interval not set; threshold not set.
.1.3.6.1.4.1.11.2.14.1.7.3.3,ICF-ETWIST::evthObject,OBJECT,read-write,,obsolete,,********* THIS OBJECT IS OBSOLETE ********* The data of this object is itself an OBJECT IDENTIFIER which selects the mib object and instance that is to be monitored for the event. Only types INTEGER and Counter are allowed.
.1.3.6.1.4.1.11.2.14.1.7.3.4,ICF-ETWIST::evthThreshold,Integer32,read-write,,obsolete,,********* THIS OBJECT IS OBSOLETE ********* The threshold against which the variable  specified in evthObject is tested over the time interval specified in the evthTimeInterval When the threshold is met or exceeded, the event is triggered. The event will not trigger again until the variable falls to or below the evthHysteresis value, and then meets or exceeds the threshold.
.1.3.6.1.4.1.11.2.14.1.7.3.5,ICF-ETWIST::evthHysteresis,Integer32,read-write,,obsolete,,********* THIS OBJECT IS OBSOLETE ********* The low value which the variable specified in evthObject must fall to or below after exceeding evthThreshold before the event can re-occur when the threshold is met or exceeded.
.1.3.6.1.4.1.11.2.14.1.7.3.6,ICF-ETWIST::evthTimeInterval,TimeTicks,read-write,,obsolete,,********* THIS OBJECT IS OBSOLETE ********* The time interval over which the variable specified in the evthObject is sampled.
.1.3.6.1.4.1.11.2.14.1.7.3.7,ICF-ETWIST::evthTimeSinceOccurrence,TimeTicks,read-only,,obsolete,,********* THIS OBJECT IS OBSOLETE ********* This object specifies the number of centiseconds since this event was last triggered.
.1.3.6.1.4.1.11.2.14.1.8,ICF-ETWIST::linkTest,,,,,,
.1.3.6.1.4.1.11.2.14.1.8.1,ICF-ETWIST::linkTestAddress,,,,,,
.1.3.6.1.4.1.11.2.14.1.8.1.1,ICF-ETWIST::linkTest802MacAddress,OCTET,read-write,,obsolete,,********* THIS OBJECT IS OBSOLETE ********* If this object is set to the MAC address of a node to link test in the same PDU that sets linkTestRepetitions to a nonzero value, the link  test performed will use IEEE 802 Test frames. Note that setting more than one of linkTest802MacAddress, linkTestIpAddress, and linkTestIpxAddress to a non-null value in the same PDU will result in a genErr. This object is now obsolete. Is functionality is being replaced by the hpicfLinktest objects.
.1.3.6.1.4.1.11.2.14.1.8.1.2,ICF-ETWIST::linkTestIpAddress,IpAddress,read-write,,obsolete,,********* THIS OBJECT IS OBSOLETE ********* If this object is set to the network address of a node to link test in the same PDU that sets linkTestRepetitions to a nonzero value, the link test performed will use ICMP Echo packets. Note that setting more than one of linkTest802MacAddress, linkTestIpAddress, and linkTestIpxAddress to a non-null value in the same PDU will result in a genErr. This object is now obsolete. Is functionality is being replaced by the hpicfLinktest objects.
.1.3.6.1.4.1.11.2.14.1.8.1.3,ICF-ETWIST::linkTestIpxAddress,OCTET,read-write,,obsolete,,********* THIS OBJECT IS OBSOLETE ********* If this object is set to the IPX address of a node to link test in the same PDU that sets linkTestRepetitions to a nonzero value, the link test performed will use IPX diagnostic packets. Note that setting more than one of linkTest802MacAddress, linkTestIpAddress, and linkTestIpxAddress to a non-null value in the same PDU will result in a genErr. This object is now obsolete. Is functionality is being replaced by the hpicfLinktest objects.
.1.3.6.1.4.1.11.2.14.1.8.2,ICF-ETWIST::linkTestRepetitions,Integer32,read-write,,obsolete,,********* THIS OBJECT IS OBSOLETE ********* The number of link tests that the device is to complete. When this object is set to a non-zero value, the linkTestSuccess object is zeroed and the device begins a link test using IEEE 802.2 Test frames, ICMP Echo packets, or IPX diagnostic packets depending on the address selected. Link test results are contained in the link test success object. This object's value decrements (to zero) as the test proceeds. The test may be canceled at any point by setting this object to 0. This object is now obsolete. Is functionality is being replaced by the hpicfLinktest objects.
.1.3.6.1.4.1.11.2.14.1.8.3,ICF-ETWIST::linkTestSuccess,Integer32,read-only,,obsolete,,********* THIS OBJECT IS OBSOLETE ********* For every successful link test, this counter is incremented. When link tests are completed, this counter contains the total number of successful tests. This object is now obsolete. Is functionality is being replaced by the hpicfLinktest objects.
.1.3.6.1.4.1.11.2.14.1.8.4,ICF-ETWIST::linkTestTimeout,TimeTicks,read-write,,obsolete,,********* THIS OBJECT IS OBSOLETE ********* The time interval over which a link test response must be received, or the test is counted as failed. This object is now obsolete. Is functionality is being replaced by the hpicfLinktest objects.
.1.3.6.1.4.1.11.2.14.1.9,ICF-ETWIST::icf8023MacTable,,not-accessible,,obsolete,,********* THIS OBJECT IS OBSOLETE ********* A list of icf8023Mac entries.
.1.3.6.1.4.1.11.2.14.1.9.1,ICF-ETWIST::icf8023MacIndex,Integer32,read-only,,obsolete,,********* THIS OBJECT IS OBSOLETE ********* The index value which uniquely identifies the port to which this entry is applicable. The port identified by a particular value of this index on a hub is the same port as identified by the same value of rptrPortIndex. Note that since this hub always has exactly 1 port group, there is no group index for this table. For a bridge, the port identified by a particular value of this index is the same port identified by the same value of ifIndex.
.1.3.6.1.4.1.11.2.14.1.9.2,ICF-ETWIST::icf8023MacInBroadcastPkts,Counter32,read-only,,obsolete,,********* THIS OBJECT IS OBSOLETE ********* Count of the broadcast packets received.
.1.3.6.1.4.1.11.2.14.1.9.3,ICF-ETWIST::icf8023MacOutBroadcastPkts,Counter32,read-only,,obsolete,,********* THIS OBJECT IS OBSOLETE ********* Count of the broadcast packets transmitted.
.1.3.6.1.4.1.11.2.14.1.9.4,ICF-ETWIST::icf8023MacInMulticastPkts,Counter32,read-only,,obsolete,,********* THIS OBJECT IS OBSOLETE ********* Count of the multicast packets received.
.1.3.6.1.4.1.11.2.14.1.9.5,ICF-ETWIST::icf8023MacOutMulticastPkts,Counter32,read-only,,obsolete,,********* THIS OBJECT IS OBSOLETE ********* Count of the multicast packets transmitted.
.1.3.6.1.4.1.11.2.14.1.9.6,ICF-ETWIST::icf8023MacRunts,Counter32,read-only,,obsolete,,********* THIS OBJECT IS OBSOLETE ********* The number of media frames encountered that were too short (by ethernet/802.3 standards).
.1.3.6.1.4.1.11.2.14.1.9.7,ICF-ETWIST::icf8023MacGiants,Counter32,read-only,,obsolete,,********* THIS OBJECT IS OBSOLETE ********* The number of media frames encountered that were too long (by ethernet/802.3 standards).
.1.3.6.1.4.1.11.2.14.1.9.8,ICF-ETWIST::icf8023MacMissedPktErrors,Counter32,read-only,,obsolete,,********* THIS OBJECT IS OBSOLETE ********* The number of frames lost due to lack of resources (e.g. ring buffers, memory buffers, etc).
.1.3.6.1.4.1.11.2.14.1.9.9,ICF-ETWIST::icf8023MacExcessDeferrals,Counter32,read-only,,obsolete,,********* THIS OBJECT IS OBSOLETE ********* The number of times a frame could not be sent due to excess deferrals because another node was transmitting continually.
.1.3.6.1.4.1.11.2.14.1.9.10,ICF-ETWIST::icf8023MacTotalMediaErrors,Counter32,read-only,,obsolete,,********* THIS OBJECT IS OBSOLETE ********* Count of all possible medium transmit and receive errors, such as crc, alignment, sequence, length, excess etc. The purpose of this object is to support aggregate LAN medium errors for event processing. Collisions and runts are not considered an error.
.1.3.6.1.4.1.11.2.14.1.9.11,ICF-ETWIST::icf8023MacSpuriousIntrs,Counter32,read-only,,obsolete,,********* THIS OBJECT IS OBSOLETE ********* The number of times that the network interface for this port generated a spurious hardware interrupt. A non-zero value for this object indicates a potential hardware problem.
.1.3.6.1.4.1.11.2.14.1.10,ICF-ETWIST::icfDownload,,,,,,
.1.3.6.1.4.1.11.2.14.1.10.1,ICF-ETWIST::icfDownloadAddress,,,,,,
.1.3.6.1.4.1.11.2.14.1.10.1.1,ICF-ETWIST::icfDownloadIpAddress,IpAddress,read-write,,obsolete,,********* THIS OBJECT IS OBSOLETE ********* The IP address of the TFTP server to download firmware from.
.1.3.6.1.4.1.11.2.14.1.10.1.2,ICF-ETWIST::icfDownloadIpxAddress,OCTET,read-write,,obsolete,,********* THIS OBJECT IS OBSOLETE ********* The IPX address of the TFTP server to download firmware from.
.1.3.6.1.4.1.11.2.14.1.10.2,ICF-ETWIST::icfDownloadFilename,OCTET,read-write,,obsolete,,********* THIS OBJECT IS OBSOLETE ********* Filename and path of file to download (maximum length of 63 characters + NULL).
.1.3.6.1.4.1.11.2.14.1.11,ICF-ETWIST::icfCommonAdmin,,,,,,
.1.3.6.1.4.1.11.2.14.1.11.1,ICF-ETWIST::icfEtwistMib,,,,,,This MIB module describes devices in the HP  Integrated Communication Facility product  line.
.1.3.6.1.4.1.11.2.14.1.11.2,ICF-ETWIST::icfETwistConformance,,,,,,
.1.3.6.1.4.1.11.2.14.1.11.2.1,ICF-ETWIST::icfETCompliances,,,,,,
.1.3.6.1.4.1.11.2.14.1.11.2.1.1,ICF-ETWIST::icfETwistHubCompliance,,,,,,********* THIS COMPLIANCE IS OBSOLETE ********* The compliance statement for EtherTwist hub devices.
.1.3.6.1.4.1.11.2.14.1.11.2.1.2,ICF-ETWIST::icfETwistBridgeCompliance,,,,,,********* THIS COMPLIANCE IS OBSOLETE ********* The compliance statement for EtherTwist bridge devices.
.1.3.6.1.4.1.11.2.14.1.11.2.1.3,ICF-ETWIST::icfETwistHubDCompliance,,,,,,********* THIS COMPLIANCE IS OBSOLETE ********* The compliance statement for EtherTwist hub devices updated for Revision D firmware features.
.1.3.6.1.4.1.11.2.14.1.11.2.1.4,ICF-ETWIST::icfETwistBridgeDCompliance,,,,,,********* THIS COMPLIANCE IS OBSOLETE ********* The compliance statement for EtherTwist hub devices updated for Revision D firmware features.
.1.3.6.1.4.1.11.2.14.1.11.2.1.5,ICF-ETWIST::icfETwistHub24SCompliance,,,,,,********* THIS COMPLIANCE IS OBSOLETE ********* The compliance statement for secure EtherTwist hubs,updated to reflect the new features of the EtherTwist Hub/24S.
.1.3.6.1.4.1.11.2.14.1.11.2.1.6,ICF-ETWIST::icfAdvStkCompliance,,,,,,********* THIS COMPLIANCE IS OBSOLETE ********* The compliance statement for AdvanceStack 10Mbit hubs.
.1.3.6.1.4.1.11.2.14.1.11.2.1.7,ICF-ETWIST::icfAdvStkSlaveCompliance,,,,,,********* THIS COMPLIANCE IS OBSOLETE ********* The compliance statement for AdvanceStack 10BaseT slave hubs.
.1.3.6.1.4.1.11.2.14.1.11.2.1.8,ICF-ETWIST::icfAdvStkVGCompliance,,,,,,********* THIS COMPLIANCE IS OBSOLETE ********* The compliance statement for AdvanceStack 100VG hubs.
.1.3.6.1.4.1.11.2.14.1.11.2.1.9,ICF-ETWIST::icfAdvStkVGSlaveCompliance,,,,,,********* THIS COMPLIANCE IS OBSOLETE ********* The compliance statement for AdvanceStack 100VG slave hubs.
.1.3.6.1.4.1.11.2.14.1.11.2.2,ICF-ETWIST::icfETGroups,,,,,,
.1.3.6.1.4.1.11.2.14.1.11.2.2.1,ICF-ETWIST::icfCommonBasicGroup,,,,,,********* THIS GROUP IS OBSOLETE ********* A collection of obsolete objects thate were shared by EtherTwist hubs, EtherTwist bridges, and AdvanceStack 10BaseT hubs.
.1.3.6.1.4.1.11.2.14.1.11.2.2.2,ICF-ETWIST::icfCommonIpGroup,,,,,,********* THIS GROUP IS OBSOLETE ********* A collection of obsolete objects thate were shared by EtherTwist hubs, EtherTwist bridges, and AdvanceStack 10BaseT hubs that support IP.
.1.3.6.1.4.1.11.2.14.1.11.2.2.3,ICF-ETWIST::icfCommonIpxGroup,,,,,,********* THIS GROUP IS OBSOLETE ********* A collection of obsolete objects thate were shared by EtherTwist hubs, EtherTwist bridges, and AdvanceStack 10BaseT hubs that support IPX.
.1.3.6.1.4.1.11.2.14.1.11.2.2.4,ICF-ETWIST::icfEncryptedPasswordGroup,,,,,,********* THIS GROUP IS OBSOLETE ********* A collection of obsolete objects that were shared by EtherTwist hubs and EtherTwist bridges. Was not implemented on EtherTwist Hub/24S or on any AdvanceStack product.
.1.3.6.1.4.1.11.2.14.1.11.2.2.5,ICF-ETWIST::icfMappingGroup,,,,,,********* THIS GROUP IS OBSOLETE ********* A collection of objects for mapping MAC addresses to device ports.
.1.3.6.1.4.1.11.2.14.1.11.2.2.6,ICF-ETWIST::icfIpMappingGroup,,,,,,********* THIS GROUP IS OBSOLETE ********* A collection of objects for using IP-layer addresses in mapping operations.
.1.3.6.1.4.1.11.2.14.1.11.2.2.7,ICF-ETWIST::icfIpxMappingGroup,,,,,,********* THIS GROUP IS OBSOLETE ********* A collection of objects for using IPX-layer addresses in mapping operations.
.1.3.6.1.4.1.11.2.14.1.11.2.2.8,ICF-ETWIST::icfSlaveMappingGroup,,,,,,********* THIS GROUP IS OBSOLETE ********* A collection of objects for mapping MAC addresses to device ports on slave AdvanceStack devices.
.1.3.6.1.4.1.11.2.14.1.11.2.2.9,ICF-ETWIST::icf8023MacGroup,,,,,,********* THIS GROUP IS OBSOLETE ********* A collection of 802.3 specific statistics for device ports.
.1.3.6.1.4.1.11.2.14.1.11.2.2.10,ICF-ETWIST::icf8023MacSlaveGroup,,,,,,********* THIS GROUP IS OBSOLETE ********* A collection of 802.3 specific statistics for device ports. on slave AdvanceStack devices.
.1.3.6.1.4.1.11.2.14.1.11.2.2.11,ICF-ETWIST::icfDownloadGroup,,,,,,********* THIS GROUP IS OBSOLETE ********* A collection of objects for initiating a network download of device firmware on EtherTwist devices.
.1.3.6.1.4.1.11.2.14.1.11.2.2.12,ICF-ETWIST::hubBasicGroup,,,,,,********* THIS GROUP IS OBSOLETE ********* A collection of objects for managing ICF hubs.
.1.3.6.1.4.1.11.2.14.1.11.2.2.13,ICF-ETWIST::hubBasicSlaveGroup,,,,,,********* THIS GROUP IS OBSOLETE ********* A collection of objects for managing slave ICF hubs.
.1.3.6.1.4.1.11.2.14.1.11.2.2.14,ICF-ETWIST::hubMappingGroup,,,,,,********* THIS GROUP IS OBSOLETE ********* A collection of objects used for mapping MAC addresses to hub ports.
.1.3.6.1.4.1.11.2.14.1.11.2.2.15,ICF-ETWIST::hubLinkBeatControlGroup,,,,,,********* THIS GROUP IS OBSOLETE ********* A collection of objects for enabling or disabling the link beat detection function on hub ports.
.1.3.6.1.4.1.11.2.14.1.11.2.2.16,ICF-ETWIST::hubBasicEnhancementsGroup,,,,,,********* THIS GROUP IS OBSOLETE ********* A collection of objects adding simple enhancements to the basic hub management objects.
.1.3.6.1.4.1.11.2.14.1.11.2.2.17,ICF-ETWIST::hubBasicAddrTableGroup,,,,,,********* THIS GROUP IS OBSOLETE ********* A collection of objects for controlling the hub address table, even when the table itself is not readable.
.1.3.6.1.4.1.11.2.14.1.11.2.2.18,ICF-ETWIST::hubReadableAddrTableGroup,,,,,,********* THIS GROUP IS OBSOLETE ********* A collection of objects for accessing a MAC address to port number table on ICF hubs.
.1.3.6.1.4.1.11.2.14.1.11.2.2.19,ICF-ETWIST::hubBackupLinkGroup,,,,,,********* THIS GROUP IS OBSOLETE ********* A collection of objects for configuring backup links on ICF hubs.
.1.3.6.1.4.1.11.2.14.1.11.2.2.20,ICF-ETWIST::hubNewEnhancementsGroup,,,,,,********* THIS GROUP IS OBSOLETE ********* A collection of objects providing new enhancements to the basic hub management objects.
.1.3.6.1.4.1.11.2.14.1.11.2.2.21,ICF-ETWIST::hubAddressMoveGroup,,,,,,********* THIS GROUP IS OBSOLETE ********* A collection of objects for tracking station address movement between ports on a hub.
.1.3.6.1.4.1.11.2.14.1.11.2.2.22,ICF-ETWIST::hubLateEventMonitorGroup,,,,,,********* THIS GROUP IS OBSOLETE ********* A collection of objects to control the late event monitor function of ICF hubs.
.1.3.6.1.4.1.11.2.14.1.11.2.2.23,ICF-ETWIST::icfBridgeBasicGroup,,,,,,********* THIS GROUP IS OBSOLETE ********* A collection of objects for managing ICF bridges.
.1.3.6.1.4.1.11.2.14.1.11.2.2.24,ICF-ETWIST::icfBridgeSpanningTreeGroup,,,,,,********* THIS GROUP IS OBSOLETE ********* A collection of objects for managing the Spanning Tree Protocol on ICF bridges.
.1.3.6.1.4.1.11.2.14.1.11.2.2.25,ICF-ETWIST::icfRemoteBridgeGroup,,,,,,********* THIS GROUP IS OBSOLETE ********* A collection of objects for managing the remote link on ICF remote bridges.
.1.3.6.1.4.1.11.2.14.1.11.2.2.26,ICF-ETWIST::icfConfigGroup,,,,,,********* THIS GROUP IS OBSOLETE ********* A collection of objects for configuring the IP protocol stack in ICF agents.
.1.3.6.1.4.1.11.2.14.2,HP-ICF-OID::icfHub,,,,,,
.1.3.6.1.4.1.11.2.14.2.1,ICF-ETWIST::hubThinlanFault,Integer32,read-write,,obsolete,,********* THIS OBJECT IS OBSOLETE ********* When set to 'true' this object causes the Fault LED to blink if the ThinLan Port is segmented.
.1.3.6.1.4.1.11.2.14.2.2,ICF-ETWIST::hubGlobal,,,,,,
.1.3.6.1.4.1.11.2.14.2.2.1,ICF-ETWIST::hubGlobalErrors,Counter32,read-only,,obsolete,,********* THIS OBJECT IS OBSOLETE ********* This counter is incremented for each packet with an error received on any port. This counter does not include runts, as they are a normal media condition.
.1.3.6.1.4.1.11.2.14.2.2.2,ICF-ETWIST::hubGlobalCollisions,Counter32,read-only,,obsolete,,********* THIS OBJECT IS OBSOLETE ********* This counter is incremented for each collision between any two or more ports (or AUI) detected by the hub.
.1.3.6.1.4.1.11.2.14.2.2.3,ICF-ETWIST::hubGlobalPktFragments,Counter32,read-only,,obsolete,,********* THIS OBJECT IS OBSOLETE ********* This counter is the sum of hubPortPktFragments for all ports.
.1.3.6.1.4.1.11.2.14.2.2.4,ICF-ETWIST::hubGlobalRunts,Counter32,read-only,,obsolete,,********* THIS OBJECT IS OBSOLETE ********* This counter is incremented for each runt frame received on any port.
.1.3.6.1.4.1.11.2.14.2.2.5,ICF-ETWIST::hubGlobalGiants,Counter32,read-only,,obsolete,,********* THIS OBJECT IS OBSOLETE ********* This counter is incremented for each giant frame received on any port.
.1.3.6.1.4.1.11.2.14.2.2.6,ICF-ETWIST::hubGlobalCrcErrors,Counter32,read-only,,obsolete,,********* THIS OBJECT IS OBSOLETE ********* This counter is incremented for each frame with a CRC error received on any port.
.1.3.6.1.4.1.11.2.14.2.2.7,ICF-ETWIST::hubGlobalAlignmentErrors,Counter32,read-only,,obsolete,,********* THIS OBJECT IS OBSOLETE ********* This counter is incremented for each frame with an alignment error received on any port.
.1.3.6.1.4.1.11.2.14.2.2.8,ICF-ETWIST::hubGlobalInOctets,Counter32,read-only,,obsolete,,********* THIS OBJECT IS OBSOLETE ********* This counter is incremented for each octet received on any port.
.1.3.6.1.4.1.11.2.14.2.2.9,ICF-ETWIST::hubGlobalInUcastPkts,Counter32,read-only,,obsolete,,********* THIS OBJECT IS OBSOLETE ********* This counter is incremented for each unicast packet received on any port.
.1.3.6.1.4.1.11.2.14.2.2.10,ICF-ETWIST::hubGlobalInNUcastPkts,Counter32,read-only,,obsolete,,********* THIS OBJECT IS OBSOLETE ********* This counter is incremented for each non-unicast packet received on any port.
.1.3.6.1.4.1.11.2.14.2.2.11,ICF-ETWIST::hubGlobalInBroadcastPkts,Counter32,read-only,,obsolete,,********* THIS OBJECT IS OBSOLETE ********* This counter is incremented for each broadcast packet received on any port.
.1.3.6.1.4.1.11.2.14.2.3,ICF-ETWIST::hubPortTable,,not-accessible,,obsolete,,********* THIS OBJECT IS OBSOLETE ********* A list of hubPort entries.
.1.3.6.1.4.1.11.2.14.2.3.1,ICF-ETWIST::hubPortIndex,Integer32,read-only,,obsolete,,********* THIS OBJECT IS OBSOLETE ********* The index value which uniquely identifies the port to which this entry is applicable. The port identified by a particular value of this index is the same port as identified by the same value of rptrPortIndex.
.1.3.6.1.4.1.11.2.14.2.3.2,ICF-ETWIST::hubPortPktFragments,Counter32,read-only,,obsolete,,********* THIS OBJECT IS OBSOLETE ********* This counter is incremented when a packet or packet fragment is encountered for a port instance.
.1.3.6.1.4.1.11.2.14.2.3.3,ICF-ETWIST::hubPortCollisions,Counter32,read-only,,obsolete,,********* THIS OBJECT IS OBSOLETE ********* This counter is incremented when a port is involved in a collision.
.1.3.6.1.4.1.11.2.14.2.3.4,ICF-ETWIST::hubPortSegmentation,Integer32,read-only,,obsolete,,********* THIS OBJECT IS OBSOLETE ********* This is a flag which is 'true' if the port is currently segmented and 'false' otherwise.
.1.3.6.1.4.1.11.2.14.2.3.5,ICF-ETWIST::hubPortLinkBeatStatus,Integer32,read-only,,obsolete,,********* THIS OBJECT IS OBSOLETE ********* This is a flag which is 'true' if link beat is detected on the port and 'false' otherwise. The value of this variable will always be 'true' when the corresponding instance of hubPortLinkBeatEnable is 'false'.
.1.3.6.1.4.1.11.2.14.2.3.6,ICF-ETWIST::hubPortLinkBeatEnable,Integer32,read-write,,obsolete,,********* THIS OBJECT IS OBSOLETE ********* When this flag is set to 'true' the port's link beat is enabled and when set to 'false' it is disabled.
.1.3.6.1.4.1.11.2.14.2.3.7,ICF-ETWIST::hubPortMacAddress,OCTET,read-only,,obsolete,,********* THIS OBJECT IS OBSOLETE ********* Each port maintains the MAC address of the node currently attached to it. This address is valid only when the port state flag is set to  'psSingle'.
.1.3.6.1.4.1.11.2.14.2.3.8,ICF-ETWIST::hubPortAddressState,Integer32,read-write,,obsolete,,********* THIS OBJECT IS OBSOLETE ********* The port state object may take on three values. 'psNone' means no packets have been received on the port. 'psSingle' means all packets received on the port have originated from a single MAC address. 'psMany' means that packets originating from more than one node have been received on the port. To (re)start a search for a MAC address set the port state to 'psNone'.
.1.3.6.1.4.1.11.2.14.2.3.9,ICF-ETWIST::hubPortPolarityReversed,Integer32,read-only,,obsolete,,********* THIS OBJECT IS OBSOLETE ********* This object is used to indicate that the hub port was wired with the positive/negative polarity of its transmit and receive pairs reversed. Note that the port will continue to operate in this state, with the hub inverting the polarity internally.
.1.3.6.1.4.1.11.2.14.2.3.10,ICF-ETWIST::hubPortLateEventDisable,INTEGER,read-only,,obsolete,true(1):false(2),********* THIS OBJECT IS OBSOLETE ********* This object indicates that the hub port was disabled as a result of excessive late collisions being caused by the end node attached to this port. This flag is cleared when the port is reenabled by setting rptrPortAdminStatus to 'enabled'.
.1.3.6.1.4.1.11.2.14.2.4,ICF-ETWIST::hubBitmaps,,,,,,
.1.3.6.1.4.1.11.2.14.2.4.1,ICF-ETWIST::hubPortsOperStatus,OCTET,read-only,,obsolete,,********* THIS OBJECT IS OBSOLETE ********* The hubPortsOperStatus is a bit map of the state of all hub ports. The object has a 1 bit for each port that is enabled, not segmented, and linkbeat is detected. Ports on which these conditions are not true have a 0 bit. The bits are placed into the OCTET STRING in the following order: octet 0 octet 1 octet 2 ... bits 7-0 bits 7-0 bits 7-0 ... ports 1-8 ports 9-16 ports 17-24 ... Values of unused bits in the last octet are undefined.
.1.3.6.1.4.1.11.2.14.2.5,ICF-ETWIST::hubAddressTableMaxAge,TimeTicks,read-write,,obsolete,,********* THIS OBJECT IS OBSOLETE ********* The hubAddressTableMaxAge is the time beyond which an inactive MAC address will be removed from the hubPortMacAddress table and the hubAddressTable. Although hubAddressTableMaxAge is specified in units of 10ms time ticks, the actual resolution of this timer is 10 seconds. A value of 65535000 indicates no aging shall take place.
.1.3.6.1.4.1.11.2.14.2.6,ICF-ETWIST::hubAddressTable,,not-accessible,,obsolete,,********* THIS OBJECT IS OBSOLETE ********* A list of entries present in the hub address table.
.1.3.6.1.4.1.11.2.14.2.6.1,ICF-ETWIST::hubAddressIndex,Integer32,read-only,,obsolete,,********* THIS OBJECT IS OBSOLETE ********* The index value which uniquely identifies the chunk to which this entry is applicable.
.1.3.6.1.4.1.11.2.14.2.6.2,ICF-ETWIST::hubAddressChunk,OCTET,read-only,,obsolete,,********* THIS OBJECT IS OBSOLETE ********* The hubAddressChunk object returns an opaque chunk of the address table. Each chunk can be interpreted as an array of records in the form: mac address [6 bytes], port number [2 bytes], inactivity time [4 bytes] On a Get, the returned chunk can include empty (unused) entries. Instances are chunk numbers, which start at 1 and go to 52. Each chunk can hold 34 addresses. A returned chunk might look like: Address Port Inactivity Time 080009001234 1 0 080009002345 2 10000 080009003456 1 20000 000000000000 1 0 080009009876 EMPTY 0 080009004567 EMPTY 15000 . . . 080009005678 EOL 959000 A value of EMPTY in the Port field indicates an unused (i.e. aged out) entry in the table. When the EOL (End Of List) bit is set in the Port  field, that entry is the last entry in the table. It is possible for EOL to be seen in any entry. EOL (0x4000) and EMPTY (0x8000) are bit masks which are ORed with the port number in the port field of the entry. It is possible for both the EOL and EMPTY bits to be set in the same entry. The remainder of the chunk after the EOL entry will be zeroed. The inactivityTime and Address fields are meaningless if the EMPTY bit is set in the Port field. In this case, inactivityTime and Address are not guaranteed to be zeroed. The Manager may start with any chunk it likes and request the chunks in any order. It may perform multiple requests for the same chunk. The agent does not save state from previous requests. A request of chunk #1 would return the contents of the first 34 address table entries, whether they are all full, all empty, or some full and the rest empty. A request of chunk #2 will return entries #35 through #68. And so on. The address table can change between Get requests. An address' location can change, or an address could age out and then be added back in at a different location in the table. Thus, the Manager could see the address twice in the table.
.1.3.6.1.4.1.11.2.14.2.7,ICF-ETWIST::hubNumBkpLinks,Integer32,read-only,,obsolete,,********* THIS OBJECT IS OBSOLETE ********* The number of backup links configurable on this hub.
.1.3.6.1.4.1.11.2.14.2.8,ICF-ETWIST::hubBkpLinkTable,,not-accessible,,obsolete,,********* THIS OBJECT IS OBSOLETE ********* A list of backup link configuration entries. For a given backup link, the hub will periodically send a test packet to the device at the end of the link. If there are no responses (the number is configurable), the hub will enable the backup port and disable the primary port. After the primary link is fixed, the user must turn the primary port on to resume normal operation. At any time, the management station can look at rptrPortAdminStatus for the backup port to determine if it is currently in use. The backup link algorithm enables and disables the backup port by modifying rptrPortAdminStatus for that port. After the backup port has been enabled by the backup link algorithm, if the primary port is subsequently enabled via the hub console port or by a set of rptrPortAdminStatus, the backup port will be turned off and the periodic test packets will begin again. When the backup link objects are set, the backup port will be turned off, the primary port will be turned on, and the periodic test packets will be sent. The time between test packets is configurable by setting hubBackupTestTime. The number of failures needed to switch to the backup link is configured by setting hubBackupConsecutiveFails. The backup link function can be turned off by setting hubBackupPort to 0. All five of the backup link objects must be set together in a single PDU except for the case of setting hubBackupPort to 0, in which case, the hubBackupPort can be set without setting the other objects. Currently, the size of the backup link table is one; future releases may provide the ability to monitor more than one backup link.
.1.3.6.1.4.1.11.2.14.2.8.1,ICF-ETWIST::hubBkpLinkIndex,Integer32,read-only,,obsolete,,********* THIS OBJECT IS OBSOLETE ********* The index value which uniquely identifies the backup link configuration entry to which the instance is applicable.
.1.3.6.1.4.1.11.2.14.2.8.2,ICF-ETWIST::hubBackupPort,Integer32,read-write,,obsolete,,********* THIS OBJECT IS OBSOLETE ********* The port number of the backup link. Setting this object to zero removes the backup link configuration.
.1.3.6.1.4.1.11.2.14.2.8.3,ICF-ETWIST::hubPrimaryPort,Integer32,read-write,,obsolete,,********* THIS OBJECT IS OBSOLETE ********* The port number of the primary link. It can only be set to zero if the hubBackupPort is also zero.
.1.3.6.1.4.1.11.2.14.2.8.4,ICF-ETWIST::hubBackupAddress,OCTET,read-write,,obsolete,,********* THIS OBJECT IS OBSOLETE ********* The MAC address of the device at the other end of the primary link which will respond to the periodic test packets sent by this hub.
.1.3.6.1.4.1.11.2.14.2.8.5,ICF-ETWIST::hubBackupTestTime,TimeTicks,read-write,,obsolete,,********* THIS OBJECT IS OBSOLETE ********* The frequency, in time ticks, between sending the periodic test packets. The actual resolution of this timer is in seconds. The test packet response timeout is fixed at 500ms.
.1.3.6.1.4.1.11.2.14.2.8.6,ICF-ETWIST::hubBackupConsecutiveFails,Integer32,read-write,,obsolete,,********* THIS OBJECT IS OBSOLETE ********* The number of test packet failures which will cause the hub to switch to the backup link (i.e., backup port turned on, primary port turned off). A value of one is generally not recomended and will cause the backup link to be enabled upon the first failure.
.1.3.6.1.4.1.11.2.14.2.9,ICF-ETWIST::hubSqeEnabled,Integer32,read-only,,obsolete,,********* THIS OBJECT IS OBSOLETE ********* When 'true', this flag indicates that SQE has been detected for the last ten agent transmits and there is a high probability that the SQE switch on the transceiver attached to the AUI port is set to Enabled, when it should be Disabled.
.1.3.6.1.4.1.11.2.14.2.10,HP-ICF-GENERIC-RPTR::hubSecurity,,,,,,
.1.3.6.1.4.1.11.2.14.2.10.1,HP-ICF-GENERIC-RPTR::hubSecurePortTable,,not-accessible,,current,,Table containing security configuration for each port.
.1.3.6.1.4.1.11.2.14.2.10.1.1,HP-ICF-GENERIC-RPTR::hubSecurePortEntry,,not-accessible,hubSecPtGroupIndex:hubSecPtPortIndex,current,,An entry in the hubSecurePortTable, containing the security configuration for a single port.
.1.3.6.1.4.1.11.2.14.2.10.1.1.1,HP-ICF-GENERIC-RPTR::hubSecPtGroupIndex,Integer32,read-only,,current,,This object identifies the group containing the port for which this entry contains security configuration information.
.1.3.6.1.4.1.11.2.14.2.10.1.1.2,HP-ICF-GENERIC-RPTR::hubSecPtPortIndex,Integer32,read-only,,current,,This object identifies the port within the group for which this entry contains security configuration information.
.1.3.6.1.4.1.11.2.14.2.10.1.1.3,HP-ICF-GENERIC-RPTR::hubSecPtSecurityAddress,OCTET,read-write,,current,,The desired authorized MAC address for this port. This can be either a regular station address to configure a specific address, or it can be one of the following special values to specify the address learning method: FFFF-FFFF-FFFE: learnOnce. First source MAC address heard on this port becomes the authorized address. Setting this value initiates learning of a new authorized address. When a new authorized address is learned, it will be stored in nonvolatile memory. This variable will return learnOnceConditionally to a GET operation after it has been set to this value. FFFF-FFFF-FFFD: learnOnceConditionally. This option will initiate learning of a new authorized address only if the previous hubSecPtSecurityAddress was set to a specific address or learnContinuous. No action will be performed if the previous value was already learnOnceConditionally. FFFF-FFFF-FFFC: learnContinuous. Any address heard becomes the new authorized address. When a new address is learned, it may cause an alarm, but it does not store anything in nonvolatile memory.
.1.3.6.1.4.1.11.2.14.2.10.1.1.4,HP-ICF-GENERIC-RPTR::hubSecPtAuthorizedAddress,OCTET,read-only,,current,,The MAC address of the station authorized to be on this port. This address could either have been configured by specifying a regular station address for hubSecPtSecurityAddress, or it could have been learned by the agent if hubSecPtSecurityAddress was set to one of the special values listed above. Once the agent has learned an authorized address, it will be saved across powerfails, unless the agent was configured for learnContinuous mode.
.1.3.6.1.4.1.11.2.14.2.10.1.1.5,HP-ICF-GENERIC-RPTR::hubSecPtPreventEavesdrop,INTEGER,read-write,,current,enable(1):disable(2),If enabled, unicast packets not addressed to the authorized address for this port will be scrambled.
.1.3.6.1.4.1.11.2.14.2.10.1.1.6,HP-ICF-GENERIC-RPTR::hubSecPtAlarmEnable,INTEGER,read-write,,current,enable(1):disable(2),If enabled, the agent will generate an intrusionTrap if a packet is received on this port with a source MAC address that is different from the hubSecPtAuthorizedAddress for this port.
.1.3.6.1.4.1.11.2.14.2.10.1.1.7,HP-ICF-GENERIC-RPTR::hubSecPtIntrusionFlag,INTEGER,read-write,,current,intrusion(1):noIntrusion(2),This flag indicates if an intrusion has occurred on this port. The Security LED on the hub will blink if any instance of this flag has the value intrusion. Setting this flag to noIntrusion will turn off the Security LED if no other ports have this flag set to intrusion. An intrusion will only cause an alarm and an intrusion log entry if this flag is equal to noIntrusion.
.1.3.6.1.4.1.11.2.14.2.10.2,HP-ICF-GENERIC-RPTR::hubIntruderLogTable,,not-accessible,,current,,This table contains a record of the twenty most recent port security violations. The first entry in the table is the oldest.
.1.3.6.1.4.1.11.2.14.2.10.2.1,HP-ICF-GENERIC-RPTR::hubIntruderLogEntry,,not-accessible,hubIntruderIndex,current,,A row in the hubIntruderLogTable containing information about a single port security violation.
.1.3.6.1.4.1.11.2.14.2.10.2.1.1,HP-ICF-GENERIC-RPTR::hubIntruderIndex,Integer32,read-only,,current,,The index of this entry in the intruder log table. Index 1 will always contain the oldest entry. If the table is full when a new intrusion occurs, the new entry becomes index 20, and all earlier entries are shifted down by one entry, removing the old index 1.
.1.3.6.1.4.1.11.2.14.2.10.2.1.2,HP-ICF-GENERIC-RPTR::hubIntruderGroup,Integer32,read-only,,current,,This object identifies the group containing the port on which this intrusion occurred.
.1.3.6.1.4.1.11.2.14.2.10.2.1.3,HP-ICF-GENERIC-RPTR::hubIntruderPort,Integer32,read-only,,current,,This object identifies the port within the group on which this intrusion occurred. A port number of zero indicates that this entry is unused and the values for the other variables in this entry are undefined.
.1.3.6.1.4.1.11.2.14.2.10.2.1.4,HP-ICF-GENERIC-RPTR::hubIntruderAddress,OCTET,read-only,,current,,This object contains the source MAC address of the intruder.
.1.3.6.1.4.1.11.2.14.2.10.2.1.5,HP-ICF-GENERIC-RPTR::hubIntruderTime,TimeTicks,read-only,,current,,The value of sysUpTime when the intrusion occurred. This will be zero if the agent has been reset since the intruder was detected, since sysUpTime could be misinterpreted in that case.
.1.3.6.1.4.1.11.2.14.2.10.2.1.6,HP-ICF-GENERIC-RPTR::hubIntruderType,INTEGER,read-only,,current,address(1):training(2):both(3):none(4),This object identifies the type of violation that occured: address, training, or both. The hubIntruderTrainingViolation object will indicate additional information, if any, on the type of training violation. This object will be equal to 'none' if this log entry is unused. Note that the values 'training' and 'both' are only valid for 802.12 ports.
.1.3.6.1.4.1.11.2.14.2.10.2.1.7,HP-ICF-GENERIC-RPTR::hubIntruderTrainingViolation,INTEGER,read-only,,current,noViolation(1):promiscuousViolation(2):repeaterViolation(3),This object indicates the type of training violation. Note that for 802.3 ports, this object will always be equal to 'noViolation'. This object will be equal to 'noViolation' if this log entry is unused.
.1.3.6.1.4.1.11.2.14.2.10.3,HP-ICF-GENERIC-RPTR::hpSecurePortTable,,not-accessible,,current,,Table containing security configuration for each port, where security for multiple MAC addresses per port is desired (e.g., switch systems).
.1.3.6.1.4.1.11.2.14.2.10.3.1,HP-ICF-GENERIC-RPTR::hpSecurePortEntry,,not-accessible,hpSecPtGroupIndex:hpSecPtPortIndex,current,,An entry in the hpSecurePortTable, containing the security configuration for a single port.
.1.3.6.1.4.1.11.2.14.2.10.3.1.1,HP-ICF-GENERIC-RPTR::hpSecPtGroupIndex,Integer32,not-accessible,,current,,This object identifies the group containing the port for which this entry contains security configuration information. On repeater systems, this can be used to identify a specific repeater within a managed stack of repeaters. On switch systems, stacked or unstacked, this value is always one.
.1.3.6.1.4.1.11.2.14.2.10.3.1.2,HP-ICF-GENERIC-RPTR::hpSecPtPortIndex,Integer32,not-accessible,,current,,This object identifies the port within the group for which this entry contains security configuration information. On a switch system, this index corresponds to the ifIndex of the port.
.1.3.6.1.4.1.11.2.14.2.10.3.1.3,HP-ICF-GENERIC-RPTR::hpSecPtAddressLimit,Integer32,read-write,,deprecated,,This object identifies the maximum number of MAC addresses learned on this port when the hpSecPtLearnMode is set to learnFirstN or learnFirstNConditionally. Changing the limit while in these modes clears any addresses for this port in the hpSecureAuthAddrTable. This limit does not apply when the learn mode is set to configureSpecific. This object will return the default value of 1 when  hpSecPtAddressLimit2 is greater than 32.
.1.3.6.1.4.1.11.2.14.2.10.3.1.4,HP-ICF-GENERIC-RPTR::hpSecPtLearnMode,INTEGER,read-write,,current,learnContinuous(1):learnFirstN(2):learnFirstNConditionally(3):configureSpecific(4):learn8021xAuthorized(5):learnLimitedContinuous(6),This object identifies the learning mode of the port. The modes are as follows: LearnContinuous. The port can learn all new MAC addresses. When a new address is learned, it is stored in a manner such that it can be retrieved from the hpSecureAuthAddrTable. Changing the mode to this value clears any existing addresses for this port in the hpSecureAuthAddrTable. learnFirstN. First N source MAC addresses heard on this port become the authorized addresses. N is configured in hpSecPtAddressLimit. Setting this value initiates learning of up to N new authorized addresses. When a new authorized address is learned, it will be stored in the hpSecureAuthAddrTable. When the table has reached its limit N for this port, any new source MAC addresses received on the port constitutes an intrusion. See hpSecPtAlarmEnable for possible responses to the intrusion. This variable will return learnFirstNConditionally to a GET operation after it has been set to this value. learnFirstNConditionally. This option will initiate learning of up to N new authorized  addresses only if the previous hpSecPtLearnMode was not set to learnFirstN or learnFirstN- Conditionally. N is configured in hpSecPtAddressLimit. configureSpecific. The port will not learn any addresses. Rather, specific authorized MAC addresses for this port are explicitly configured via the hpSecureCfgAddrTable. These addresses are also stored in the hpSecureAuthAddrTable. Any source MAC address received on this port other than those configured, constitutes an intrusion. See hpSecPtAlarmEnable for possible responses. learn8021xAuthorized. The port will learn only MAC address of a client authorized by 802.1X  authenticator. learnLimitedContinuous. First N source MAC addresses heard on this port become the authorized addresses. N is specified by the hpSecPtAddressLimit object. When a new authorized address is learned, it will be stored in the hpSecureAuthAddrTable. When new source MAC addresses received on the port constitutes an intrusion. See hpSecPtAlarmEnable for possible responses. The authorized addresses in this mode will age out of the system, therefore the list of authorized addresses can be dynamic over  time.
.1.3.6.1.4.1.11.2.14.2.10.3.1.5,HP-ICF-GENERIC-RPTR::hpSecPtPreventEavesdrop,INTEGER,read-write,,deprecated,enable(1):disable(2),If enabled on a switch, outbound unknown unicast packets will not be forwarded out this port. If enabled on a repeater, outbound unknown unicast packets for this port will be scrambled.
.1.3.6.1.4.1.11.2.14.2.10.3.1.6,HP-ICF-GENERIC-RPTR::hpSecPtAlarmEnable,INTEGER,read-write,,current,disable(1):sendTrap(2):sendTrapAndDisablePort(3),This object identifies the action taken when an intrusion occurs. See hpSecPtLearnMode for what constitutes an intrusion. disable. No trap is sent and the port remains enabled. SendTrap. If the hpSecPtIntrusionFlag is set to noIntrusion, the agent will generate an intrusionTrap. SendTrapAndDisablePort. If the hpSecPtIntru- sionFlag is set to noIntrusion, the agent generate an intrusionTrap and disable the port. This value does not apply to repeaters.
.1.3.6.1.4.1.11.2.14.2.10.3.1.7,HP-ICF-GENERIC-RPTR::hpSecPtIntrusionFlag,INTEGER,read-write,,current,intrusion(1):noIntrusion(2),This flag indicates if an intrusion has occured on this port. Security-related LED(s) on the device will blink if any instance of this flag has the value intrusion. Setting this flag to noIntrusion will turn off the appropriate LED(s). An intrusion will only cause an alarm and an intrusion log entry if this flag is equal to noIntrusion. On a switch, packets causing intrusions will be not be forwarded.
.1.3.6.1.4.1.11.2.14.2.10.3.1.8,HP-ICF-GENERIC-RPTR::hpSecPtAddressLimit2,Integer32,read-write,,current,,This object identifies the maximum number of MAC addresses learned on this port when the hpSecPtLearnMode is set to learnFirstN or learnFirstNConditionally. The current maximum limit is 64. Changing the limit while in these modes clears any addresses for this port in the hpSecureAuthAddrTable. This limit does apply when the learn mode is set to configureSpecific.
.1.3.6.1.4.1.11.2.14.2.10.4,HP-ICF-GENERIC-RPTR::hpSecureCfgAddrTable,,not-accessible,,current,,Table containing multiple configured authorized addresses per port. Facilitates security for ports whose hpSecPtLearnMode is set to configureSpecific.
.1.3.6.1.4.1.11.2.14.2.10.4.1,HP-ICF-GENERIC-RPTR::hpSecureCfgAddrEntry,,not-accessible,hpSecCfgAddrGroupIndex:hpSecCfgAddrPortIndex:hpSecCfgAddress,current,,An entry in the hpSecureCfgAddrTable, containing the configured authorized address for a single port. Entries are stored in nonvolatile memory when either the hpSecPtrLearnMode for the port is changed to configureSpecific, or a new entry is configured while hpSecPtrLearnMode for the port is currently set to configureSpecific.
.1.3.6.1.4.1.11.2.14.2.10.4.1.1,HP-ICF-GENERIC-RPTR::hpSecCfgAddrGroupIndex,Integer32,not-accessible,,current,,This object identifies the group containing the port for which this entry contains the configured authorized address. On repeater systems, this can be used to identify a specific repeater within a managed stack of repeaters. On switch systems, stacked or unstacked, this value is always one.
.1.3.6.1.4.1.11.2.14.2.10.4.1.2,HP-ICF-GENERIC-RPTR::hpSecCfgAddrPortIndex,Integer32,not-accessible,,current,,This object identifies the port within the group for which this entry contains the configured authorized address. On a switch, this index corresponds to the ifIndex of the port.
.1.3.6.1.4.1.11.2.14.2.10.4.1.3,HP-ICF-GENERIC-RPTR::hpSecCfgAddress,OCTET,not-accessible,,current,,A specific authorized MAC address for this port configured by a management station.
.1.3.6.1.4.1.11.2.14.2.10.4.1.4,HP-ICF-GENERIC-RPTR::hpSecCfgStatus,INTEGER,read-create,,current,active(1):notInService(2):notReady(3):createAndGo(4):createAndWait(5):destroy(6),The row status of a hpSecureCfgAddrEntry.
.1.3.6.1.4.1.11.2.14.2.10.5,HP-ICF-GENERIC-RPTR::hpSecureAuthAddrTable,,not-accessible,,current,,Table containing the authorized addresses for each port. An authorized address is an address learned while the hpSecPtLearnMode for the port is set to learnContinuous, learnFirstN,  learnLimitedContinuous, or learnFirstNConditionally;  or an address in the hpSecureCfgAddrTable when the  hpSecPtLearnMode for the port is set to configureSpecific. On a switch, for ports whose hpSecPtLearnMode is set to learnContinuous or learnLimitedContinuous,  this table may return MAC address information based  on the switch's 802.1d forwarding database.
.1.3.6.1.4.1.11.2.14.2.10.5.1,HP-ICF-GENERIC-RPTR::hpSecureAuthAddrEntry,,not-accessible,hpSecAuthAddrGroupIndex:hpSecAuthAddrPortIndex:hpSecAuthAddress,current,,An entry in the hpSecureAuthAddrTable, containing the authorized address for a single port. Entries are stored in nonvolatile memory except when the port's hpSecPtLearnMode is set to learnContinuous or learnLimitedContinuous.
.1.3.6.1.4.1.11.2.14.2.10.5.1.1,HP-ICF-GENERIC-RPTR::hpSecAuthAddrGroupIndex,Integer32,not-accessible,,current,,This object identifies the group containing the port for which this entry contains authorized address information. On repeater systems, this can be used to identify a specific repeater within a managed stack of repeaters. On switch systems, stacked or unstacked, this value is always one.
.1.3.6.1.4.1.11.2.14.2.10.5.1.2,HP-ICF-GENERIC-RPTR::hpSecAuthAddrPortIndex,Integer32,not-accessible,,current,,This object identifies the port within the group for which this entry contains authorized address information. On a switch, this index corresponds to ifIndex of the port.
.1.3.6.1.4.1.11.2.14.2.10.5.1.3,HP-ICF-GENERIC-RPTR::hpSecAuthAddress,OCTET,read-only,,current,,The MAC address of the station authorized to be on this port. See hpSecureAuthAddrTable for the definition of 'authorized address'.
.1.3.6.1.4.1.11.2.14.2.11,ICF-ETWIST::hubAddressMoveLogTable,,not-accessible,,obsolete,,********* THIS OBJECT IS OBSOLETE ********* A log of the 20 most recent times that the agent detected that a source MAC address which had been heard on one port had moved to a different port.
.1.3.6.1.4.1.11.2.14.2.11.1,ICF-ETWIST::hubAddressMoveLogEntry,,not-accessible,hubAddrMoveIndex,obsolete,,********* THIS OBJECT IS OBSOLETE ********* A row in the hubAddressMoveLogTable containing information about a single address movement.
.1.3.6.1.4.1.11.2.14.2.11.1.1,ICF-ETWIST::hubAddrMoveIndex,Integer32,read-only,,obsolete,,********* THIS OBJECT IS OBSOLETE ********* The index of this entry in the address movement log table. Index 1 will always contain the oldest entry. If the table is full when a new address movement occurs, the new entry becomes index 20, and all earlier entries are shifted down by one entry, removing the old index 1.
.1.3.6.1.4.1.11.2.14.2.11.1.2,ICF-ETWIST::hubAddrMoveAddress,OCTET,read-only,,obsolete,,********* THIS OBJECT IS OBSOLETE ********* The MAC address of the station that moved to a new port.
.1.3.6.1.4.1.11.2.14.2.11.1.3,ICF-ETWIST::hubAddrMoveOldGroup,Integer32,read-only,,obsolete,,********* THIS OBJECT IS OBSOLETE ********* The group containing the port on which this address had been operating before it moved.
.1.3.6.1.4.1.11.2.14.2.11.1.4,ICF-ETWIST::hubAddrMoveOldPort,Integer32,read-only,,obsolete,,********* THIS OBJECT IS OBSOLETE ********* The port within the group on which this address had been operating before it moved.
.1.3.6.1.4.1.11.2.14.2.11.1.5,ICF-ETWIST::hubAddrMoveNewGroup,Integer32,read-only,,obsolete,,********* THIS OBJECT IS OBSOLETE ********* The group containing the port that the address moved to.
.1.3.6.1.4.1.11.2.14.2.11.1.6,ICF-ETWIST::hubAddrMoveNewPort,Integer32,read-only,,obsolete,,********* THIS OBJECT IS OBSOLETE ********* The port within the group that the address moved to.
.1.3.6.1.4.1.11.2.14.2.12,ICF-ETWIST::hubLateEventMonitor,INTEGER,read-write,,obsolete,off(1):onSingle(2):onAll(3),********* THIS OBJECT IS OBSOLETE ********* This object configures the late event monitoring functionality for the hub. This mode periodically samples the rptrMonitorPortLateEvents value for each port. If the agent detects excessive late events on a port, the port will be disabled by setting the rptrPortAdminStatus for that port to 'disabled', and the hubPortLateEventDisable flag for that port will be set to 'true'. This mode is 'off' by default. Setting it to 'onSingle' enables the mode for all non-cascaded hub ports. Setting it to 'onAll' enables the mode for all hub ports, including cascaded ports.
.1.3.6.1.4.1.11.2.14.3,HP-ICF-OID::icfBridge,,,,,,
.1.3.6.1.4.1.11.2.14.3.1,ICF-ETWIST::operationalState,Integer32,read-write,,obsolete,,********* THIS OBJECT IS OBSOLETE ********* This object controls the forwarding nature of the bridge. In the Learning state the bridge will  learn new MAC addresses, and it ages out older MAC addresses. Statically configured addresses are discarded (they do not age). In the Secure state, the bridge will not learn new MAC addresses. Statically configured addresses are forwarded (they do not age).
.1.3.6.1.4.1.11.2.14.3.2,ICF-ETWIST::forwardDbMaxAge,TimeTicks,read-write,,obsolete,,********* THIS OBJECT IS OBSOLETE ********* The value of this object controls how long a MAC address stays in the forwarding database. See 802.1d, section 3.9.2 'Dynamic Entries'.
.1.3.6.1.4.1.11.2.14.3.3,ICF-ETWIST::addressTable,,not-accessible,,obsolete,,********* THIS OBJECT IS OBSOLETE ********* A list of address entries.
.1.3.6.1.4.1.11.2.14.3.3.1,ICF-ETWIST::addressIndex,Integer32,read-only,,obsolete,,********* THIS OBJECT IS OBSOLETE ********* The index value which uniquely identifies the chunk to which this entry is applicable.
.1.3.6.1.4.1.11.2.14.3.3.2,ICF-ETWIST::addressChunk,OCTET,read-write,,obsolete,,********* THIS OBJECT IS OBSOLETE ********* This object returns an opaque chunk of the address table. The instance specifies a chunk of the address table. Each chunk can be interpreted as an array of 41 records of the form: { macAddress[6bytes], port number[2bytes],  permanence[2bytes] }. Address Port Perm 00 080009001234 1 Dynamic(0x0000) 01 080009002345 2 Dynamic(0x0000) 02 000000000000 EMPTY(0x8000) Dynamic(0x0000) 03 080009003456 1 Dynamic(0x0000) 04 000000000000 1 Dynamic(0x0000) 05 080009009876 EMPTY(0x8000) Dynamic(0x0000) 06 080009004567 EMPTY(0x8000) Static(0x0008) 07 080009041d08  ... ... ... 40 080009005678 EOL(0x4000) Permanent(0x0000) A value of EMPTY in the Port field indicates an aged out table entry. A value of EOL in the Port field indicates that it is the last entry in the table. Of course, EOL will only be seen in the last entry. EOL and EMPTY are AND-able bit fields. The Disposition and Address are meaningless if Port is EMPTY. When instance=1 is used on a Set, the agent clears the table prior to setting any addresses. On subsequent Sets, the agent adds the specified addresses. If a Set starts at instance > 1, the specified addresses will be added to the table without first clearing the table. Addresses are already in the table are deleted and then readded.
.1.3.6.1.4.1.11.2.14.3.4,ICF-ETWIST::brgPortTable,,not-accessible,,obsolete,,********* THIS OBJECT IS OBSOLETE ********* A list of brgPort entries.
.1.3.6.1.4.1.11.2.14.3.4.1,ICF-ETWIST::brgPortIndex,Integer32,read-only,,obsolete,,********* THIS OBJECT IS OBSOLETE ********* The index value which uniquely identifies the interface/port to which this entry is applicable. The interface/port identified by a particular value of this index is the same interface/port as identified by the same value of ifIndex.
.1.3.6.1.4.1.11.2.14.3.4.2,ICF-ETWIST::brgPortCacheHits,Counter32,read-only,,obsolete,,********* THIS OBJECT IS OBSOLETE ********* Count of the successful cache matches when looking up a destination MAC address.
.1.3.6.1.4.1.11.2.14.3.4.3,ICF-ETWIST::brgPortCacheMisses,Counter32,read-only,,obsolete,,********* THIS OBJECT IS OBSOLETE ********* Count of the unsuccessful cache matches when looking up a destination MAC address.
.1.3.6.1.4.1.11.2.14.3.4.4,ICF-ETWIST::brgPortForwardedPkts,Counter32,read-only,,obsolete,,********* THIS OBJECT IS OBSOLETE ********* Count of the packets received on this port and forwarded to the other port.
.1.3.6.1.4.1.11.2.14.3.4.5,ICF-ETWIST::brgPortFilteredPkts,Counter32,read-only,,obsolete,,********* THIS OBJECT IS OBSOLETE ********* Count of the frames that were received on this port and filtered.
.1.3.6.1.4.1.11.2.14.3.5,ICF-ETWIST::wildcardTable,,not-accessible,,obsolete,,********* THIS OBJECT IS OBSOLETE ********* A list of wildcard entries.
.1.3.6.1.4.1.11.2.14.3.5.1,ICF-ETWIST::wildcardIndex,Integer32,read-only,,obsolete,,********* THIS OBJECT IS OBSOLETE ********* The index value which uniquely identifies the interface/port to which this entry is applicable. The interface/port identified by a particular value of this index is the same interface/port as identified by the same value of ifIndex.
.1.3.6.1.4.1.11.2.14.3.5.2,ICF-ETWIST::wildcardFilter,OCTET,read-write,,obsolete,,********* THIS OBJECT IS OBSOLETE ********* This object contains the binary value used to filter frames. The data in the frame at the offset specified by the Wildcard offsets is XOR'ed with this object after AND'ing with the Wildcard Mask. If zero result occurs, the packet is discarded (filtered). Suppose the user specifies the following values: data: 11001010 10101010 10101010 10101010 mask: 11100000 00000000 00000000 00000000 filter: 11100000 00000000 00000000 00000000 AND'ing data with the mask gives: 11000000 00000000 00000000 00000000 XOR'ing that value with the filter gives: 00100000 00000000 00000000 00000000 The non-zero result indicates no match (don't discard). Another example: data: 10011010 10101010 10101010 10101010 mask: 10010000 00000000 00000000 00000000 filter: 10010000 00000000 00000000 00000000 AND'ing data with the mask gives: 10010000 00000000 00000000 00000000 XOR'ing that value with the filter gives: 00000000 00000000 00000000 00000000 A zero result indicates a match, so we discard (filter) the packet. The filter AND'ed with the mask must equal the filter. This is an example of a legal filter/mask pair: filter: 00010000 00000000 00000000 00000000 mask: 10010000 00000000 00000000 00000000 AND'ed: 00010000 00000000 00000000 00000000 (equals filter) Another way of saying this: if a mask bit is zero, the corresponding filter bit must be zero. The following would be an illegal pair: filter: 01110000 00000000 00000000 00000000 mask: 10010000 00000000 00000000 00000000 AND'ed: 00010000 00000000 00000000 00000000  ( != filter)
.1.3.6.1.4.1.11.2.14.3.5.3,ICF-ETWIST::wildcardMask,OCTET,read-write,,obsolete,,********* THIS OBJECT IS OBSOLETE ********* This object indicates which portion of the wildcardFilter is to be used in filtering. The data in the frame at the offset specified by Wildcard offsets is AND'ed with this object. The result is XOR'ed with the Wildcard Filter object. If a zero result is obtained, the packet is discarded. If an all-zeros wildcardMask is specified, a genErr is returned. Also, see mask/filter constraints in the description of the wildcardFilter object.
.1.3.6.1.4.1.11.2.14.3.5.4,ICF-ETWIST::wildcardOffset,Integer32,read-write,,obsolete,,********* THIS OBJECT IS OBSOLETE ********* Indicates the position in a received frame which is to have the Wildcard Mask/Filter applied. The indicated packet byte is aligned with the 0th byte of the wildcard mask/filter held in network byte order. The MAC destination address starts at byte position (wildcardOffset) zero. The wildcardOffset must fall on a 2-byte boundary, 0,2,4,...,1512 (violations of this constraint result in a genErr). Filters can be aligned on non 2-byte boundaries through use of the wildcardUserOffset.
.1.3.6.1.4.1.11.2.14.3.5.5,ICF-ETWIST::wildcardUserOffset,Integer32,read-write,,obsolete,,********* THIS OBJECT IS OBSOLETE ********* This value is a byte offset from the beginning of the packet. If this offset is such that any portion of the filter extends past the end of the packet (for wildcard filtering purposes, the FCS is part of the packet), then the filter is considered not to match, and the packet is not filtered. For a particular filter, the wildcardUserOffset must be greater than or equal to the wildcardOffset. wildcardUserOffset must be between 0 and 1514, inclusive. The wildcardUserOffset, wildcardOffset pair must conform to one of the following four relationships and also be subject to the range restrictions listed above. For n = 0,..,378 Offset 4n 4n 4n 4n+2 UserOffset 4n 4n+1 4n+2 4n+3 As an example, consider four examples in the following table for locating the filter at or near the beginning of a packet: - 6 filter/mask bytes - - desired - 0 1 2 3 4 5 6 - position - A|f/m0 f/m1 f/m2 f/m3 00 00 00 |0,4,8,12,... B| 00 f/m0 f/m1 f/m2 f/m3 00 00 |1,5,9,13,... C| 00 00 f/m0 f/m1 f/m2 f/m3 00 |2,6,10,14,... D| 00 00 00 f/m0 f/m1 f/m2 f/m3|3,7,11,15,... Example A corresponds to a UserOffset/Offset pair such as 0/0 (4n/4n). Example B represents a pair such as 0/1 (4n/4n+1). Example C is 0/2  (4n/4n+2). Finally, example D is 2/3 (4n+2/4n+3). If any of the above constraints is not honored, the SET Response will indicate genErr.
.1.3.6.1.4.1.11.2.14.3.5.6,ICF-ETWIST::wildcardArm,Integer32,read-write,,obsolete,,********* THIS OBJECT IS OBSOLETE ********* This object arms (enables) the Wildcard Filter provided all of the other wildcard objects have been set to proper values. To disarm a wildcard, only the wildcardArm object need be set.
.1.3.6.1.4.1.11.2.14.3.6,ICF-ETWIST::stp,,,,,,
.1.3.6.1.4.1.11.2.14.3.6.1,ICF-ETWIST::stpBridgeId,OCTET,read-only,,obsolete,,********* THIS OBJECT IS OBSOLETE ********* A 64 bit binary bridge id composed of bridge priority and the bridge's mac address fields. see: IEEE 802.1(d) 6.8.1.1.3(1), 4.5.3.7
.1.3.6.1.4.1.11.2.14.3.6.2,ICF-ETWIST::stpTopoChangeTime,TimeTicks,read-only,,obsolete,,********* THIS OBJECT IS OBSOLETE ********* The time since the last topology change. see:  IEEE 802.1(d) 6.8.1.1.3(2), 4.5.3.12
.1.3.6.1.4.1.11.2.14.3.6.3,ICF-ETWIST::stpTopoNumChanges,Counter32,read-only,,obsolete,,********* THIS OBJECT IS OBSOLETE ********* The number of topo changes since initialization of STP. see: IEEE 802.1(d) 6.8.1.1.3(3)
.1.3.6.1.4.1.11.2.14.3.6.4,ICF-ETWIST::stpTopoChange,Integer32,read-only,,obsolete,,********* THIS OBJECT IS OBSOLETE ********* A 1 bit flag broadcast by the root bridge indicating that a topology change is underway, and Stp bridges should use short term aging. see: IEEE 802.1(d) 6.8.1.1.3(4), 4.5.3.12
.1.3.6.1.4.1.11.2.14.3.6.5,ICF-ETWIST::stpDesignatedRoot,OCTET,read-only,,obsolete,,********* THIS OBJECT IS OBSOLETE ********* The binary bridge id that this bridge believes to be the root bridge for the bridged Lan. see: IEEE 802.1(d) 6.8.1.1.3(5), 4.5.3.1
.1.3.6.1.4.1.11.2.14.3.6.6,ICF-ETWIST::stpRootCost,Integer32,read-only,,obsolete,,********* THIS OBJECT IS OBSOLETE ********* The cost of the path to the root bridge from this bridge; equal to the sum of the designated cost and the path cost held for the root port. see: IEEE 802.1(d) 6.8.1.1.3(6), 4.5.3.2
.1.3.6.1.4.1.11.2.14.3.6.7,ICF-ETWIST::stpRootPort,Integer32,read-only,,obsolete,,********* THIS OBJECT IS OBSOLETE ********* The port id that this bridge believes to be the root bridge's root port for the bridged Lan. see: IEEE 802.1(d) 6.8.1.1.3(7), 4.5.3.3
.1.3.6.1.4.1.11.2.14.3.6.8,ICF-ETWIST::stpCurrentMaxAge,Integer32,read-only,,obsolete,,********* THIS OBJECT IS OBSOLETE ********* The Max Age value received from the Root Bridge (in seconds); the Stp is currently using the value. see: IEEE 802.1(d) 6.8.1.1.3(8), 4.5.3.4
.1.3.6.1.4.1.11.2.14.3.6.9,ICF-ETWIST::stpCurrentHelloTime,Integer32,read-only,,obsolete,,********* THIS OBJECT IS OBSOLETE ********* The Hello time value received from the Root Bridge (in seconds); the Stp records the value. see: IEEE 802.1(d) 6.8.1.1.3(9), 4.5.3.5
.1.3.6.1.4.1.11.2.14.3.6.10,ICF-ETWIST::stpCurrentForwardDelay,Integer32,read-only,,obsolete,,********* THIS OBJECT IS OBSOLETE ********* The forward delay value received from the Root Bridge (in seconds); the Stp is currently using the value. see: IEEE 802.1(d) 6.8.1.1.3(10), 4.5.3.6
.1.3.6.1.4.1.11.2.14.3.6.11,ICF-ETWIST::stpMaxAge,Integer32,read-write,,obsolete,,********* THIS OBJECT IS OBSOLETE ********* The maximum age allowed of Config information for a port before a bridge will attempt to become the root (in seconds). Transmitted by this bridge when it is, or is attempting to become the root. see: IEEE 802.1(d) 6.8.1.1.3(11), 6.8.1.2.2(1), 4.5.3.8
.1.3.6.1.4.1.11.2.14.3.6.12,ICF-ETWIST::stpHelloTime,Integer32,read-write,,obsolete,,********* THIS OBJECT IS OBSOLETE ********* The time between Config packet transmission when this bridge is, or is attempting to become the root (in seconds). Transmitted by this bridge when it is, or is attempting to become the root. see: IEEE 802.1(d) 6.8.1.1.3(12), 6.8.1.2.2(2), 4.5.3.9
.1.3.6.1.4.1.11.2.14.3.6.13,ICF-ETWIST::stpForwardDelay,Integer32,read-write,,obsolete,,********* THIS OBJECT IS OBSOLETE ********* The time spent in the Listening and Learning states used when this bridge is, or is attempting to become the root (in seconds). Transmitted by this bridge when it is, or is attempting to become the root. see: IEEE 802.1(d) 6.8.1.1.3(13), 6.8.1.2.2(3), 4.5.3.10
.1.3.6.1.4.1.11.2.14.3.6.14,ICF-ETWIST::stpPriority,Integer32,read-write,,obsolete,,********* THIS OBJECT IS OBSOLETE ********* The upper 16 bits of the 64 bit BridgeId composed of priority and the bridge's mac address fields. see: IEEE 802.1(d) 6.8.1.2.2(4), 4.5.3.7
.1.3.6.1.4.1.11.2.14.3.6.15,ICF-ETWIST::stpPortTable,,not-accessible,,obsolete,,********* THIS OBJECT IS OBSOLETE ********* A list of stpPort entries.
.1.3.6.1.4.1.11.2.14.3.6.15.1,ICF-ETWIST::stpPortIndex,Integer32,read-only,,obsolete,,********* THIS OBJECT IS OBSOLETE ********* The index value which uniquely identifies the port to which this entry is applicable. The port identified by a particular value of this index is the same interface/port as identified by the same value of ifIndex. Not an IEEE 802.1(d) reqmt.
.1.3.6.1.4.1.11.2.14.3.6.15.2,ICF-ETWIST::stpPortState,Integer32,read-write,,obsolete,,********* THIS OBJECT IS OBSOLETE ********* The state of a port on a 2 port bridge is really the state of the bridge itself. Management is only allowed to set this object to 'stpDisabled' or 'stpBlocking'. Setting the object to 'stpDisabled' will turn off spanning tree only if the state is not 'stpBlocking' (to prevent loops). Setting the object to 'stpBlocking' will turn on spanning tree only if it was previously disabled. see: IEEE 802.1(d) 6.8.2.1.3(2), 4.4, 4.5.5.2
.1.3.6.1.4.1.11.2.14.3.6.15.3,ICF-ETWIST::stpPortId,Integer32,read-only,,obsolete,,********* THIS OBJECT IS OBSOLETE ********* The 16 bit port id composed of priority and the port's unique id fields. see: IEEE 802.1(d) 6.8.2.1.3(3), 4.5.5.1
.1.3.6.1.4.1.11.2.14.3.6.15.4,ICF-ETWIST::stpPortPathCost,Integer32,read-write,,obsolete,,********* THIS OBJECT IS OBSOLETE ********* The contribution of the path through this port, when the port is the root port, to the total cost of the path to the root for this bridge. see: IEEE 802.1(d) 6.8.2.1.3(4), 6.8.2.3.2(2), 4.5.5.3
.1.3.6.1.4.1.11.2.14.3.6.15.5,ICF-ETWIST::stpPortRootId,OCTET,read-only,,obsolete,,********* THIS OBJECT IS OBSOLETE ********* The bridge id that this port believes to be the root bridge for the bridged Lan. see: IEEE 802.1(d) 6.8.2.1.3(5), 4.5.5.4
.1.3.6.1.4.1.11.2.14.3.6.15.6,ICF-ETWIST::stpPortDesignatedCost,Integer32,read-only,,obsolete,,********* THIS OBJECT IS OBSOLETE ********* The cost of the path to the root offered by the Designated Port on the LAN to which this Port is attached. see: IEEE 802.1(d) 6.8.2.1.3(6), 4.5.5.5
.1.3.6.1.4.1.11.2.14.3.6.15.7,ICF-ETWIST::stpPortDesignatedBridge,OCTET,read-only,,obsolete,,********* THIS OBJECT IS OBSOLETE ********* The Bridge Id of the designated bridge for the LAN associated with the port. see: IEEE 802.1(d) 6.8.2.1.3(7), 4.5.5.6
.1.3.6.1.4.1.11.2.14.3.6.15.8,ICF-ETWIST::stpPortDesignatedPort,Integer32,read-only,,obsolete,,********* THIS OBJECT IS OBSOLETE ********* The port id of the bridge believed to be the designated port of the LAN associated with the port. see: IEEE 802.1(d) 6.8.2.1.3(8), 4.5.5.7
.1.3.6.1.4.1.11.2.14.3.6.15.9,ICF-ETWIST::stpPortPriority,Integer32,read-write,,obsolete,,********* THIS OBJECT IS OBSOLETE ********* The upper 8 bits of the 16 bit PortId composed of priority and the port's unique id fields. see: IEEE 802.1(d) 6.8.2.3.2(3), 4.5.5.1
.1.3.6.1.4.1.11.2.14.3.7,ICF-ETWIST::hdlcErrorTable,,not-accessible,,obsolete,,********* THIS OBJECT IS OBSOLETE ********* A list of hdlcError entries.
.1.3.6.1.4.1.11.2.14.3.7.1,ICF-ETWIST::hdlcErrorIndex,Integer32,read-only,,obsolete,,********* THIS OBJECT IS OBSOLETE ********* The index value which uniquely identifies the port to which this entry is applicable. The port identified by a particular value of this index is the same interface/port as identified by the same value of ifIndex. IcfBridge.HP28674: There is only one 'real' instance of this object on port 2.
.1.3.6.1.4.1.11.2.14.3.7.2,ICF-ETWIST::hdlcErrorIndications,Counter32,read-only,,obsolete,,********* THIS OBJECT IS OBSOLETE ********* Errors occurring during information transfer which required instruction from CPU for recovery. This is a serious link problem. The local node will either reset or disconnect after receiving this message.
.1.3.6.1.4.1.11.2.14.3.7.3,ICF-ETWIST::hdlcT1Timeouts,Counter32,read-only,,obsolete,,********* THIS OBJECT IS OBSOLETE ********* The number of times the retransmission timer (x25T1Timer) timed out.
.1.3.6.1.4.1.11.2.14.3.7.4,ICF-ETWIST::hdlcMissedPackets,Counter32,read-only,,obsolete,,********* THIS OBJECT IS OBSOLETE ********* Count of the frames lost by the receiver because there wasn't a receive buffer.
.1.3.6.1.4.1.11.2.14.3.7.5,ICF-ETWIST::hdlcRcvOverruns,Counter32,read-only,,obsolete,,********* THIS OBJECT IS OBSOLETE ********* Count of the number of times the reciever's FIFO was full when the receiver was ready to put new data into the FIFO.
.1.3.6.1.4.1.11.2.14.3.7.6,ICF-ETWIST::hdlcXmtUnderruns,Counter32,read-only,,obsolete,,********* THIS OBJECT IS OBSOLETE ********* Count of the number of times the transmitter has aborted a frame transmission because data was late from memory.
.1.3.6.1.4.1.11.2.14.3.7.7,ICF-ETWIST::hdlcProviderLostPrimitives,Counter32,read-only,,obsolete,,********* THIS OBJECT IS OBSOLETE ********* Count of the number of lost control frames due to 802.3 priority processing on receive.
.1.3.6.1.4.1.11.2.14.3.7.8,ICF-ETWIST::hdlcRuntFrameReceives,Counter32,read-only,,obsolete,,********* THIS OBJECT IS OBSOLETE ********* Count of the HDLC frames received that were less than the minimum legal HDLC size.
.1.3.6.1.4.1.11.2.14.3.7.9,ICF-ETWIST::hdlcGiantFrameReceives,Counter32,read-only,,obsolete,,********* THIS OBJECT IS OBSOLETE ********* Count of the HDLC frames received that were larger than the maximum legal size that can be sent on the 802.3 LAN link.
.1.3.6.1.4.1.11.2.14.3.7.10,ICF-ETWIST::hdlcBadFrameReceives,Counter32,read-only,,obsolete,,********* THIS OBJECT IS OBSOLETE ********* Count of the sum of: HDLC frames with bad checksum, and misaligned HDLC frames.
.1.3.6.1.4.1.11.2.14.3.7.11,ICF-ETWIST::hdlcRejectFrameReceives,Counter32,read-only,,obsolete,,********* THIS OBJECT IS OBSOLETE ********* Count of the HDLC reject frames received.
.1.3.6.1.4.1.11.2.14.3.7.12,ICF-ETWIST::hdlcRejectFrameSends,Counter32,read-only,,obsolete,,********* THIS OBJECT IS OBSOLETE ********* Count of the HDLC reject frames sent.
.1.3.6.1.4.1.11.2.14.3.7.13,ICF-ETWIST::hdlcFrameRejectFrameRecs,Counter32,read-only,,obsolete,,********* THIS OBJECT IS OBSOLETE ********* Count of the HDLC frame reject frames (FRMR) received.
.1.3.6.1.4.1.11.2.14.3.8,ICF-ETWIST::hdlcLocalTable,,not-accessible,,obsolete,,********* THIS OBJECT IS OBSOLETE ********* A list of hdlcLocal entries.
.1.3.6.1.4.1.11.2.14.3.8.1,ICF-ETWIST::hdlcLocalIndex,Integer32,read-only,,obsolete,,********* THIS OBJECT IS OBSOLETE ********* Index into Hdlc local statistics table on a per port basis. bridge.HP28674: There is only one 'real' instance of this object on port 2.
.1.3.6.1.4.1.11.2.14.3.8.2,ICF-ETWIST::hdlcLocalResetRequests,Counter32,read-only,,obsolete,,********* THIS OBJECT IS OBSOLETE ********* Count of local HDLC requests to reset current logical link.
.1.3.6.1.4.1.11.2.14.3.8.3,ICF-ETWIST::hdlcLocalResetConfirms,Counter32,read-only,,obsolete,,********* THIS OBJECT IS OBSOLETE ********* Count of local HDLC node link reset confirmations.
.1.3.6.1.4.1.11.2.14.3.8.4,ICF-ETWIST::hdlcLocalConnectRequests,Counter32,read-only,,obsolete,,********* THIS OBJECT IS OBSOLETE ********* Count of local HDLC node attempts to establish logical link.
.1.3.6.1.4.1.11.2.14.3.8.5,ICF-ETWIST::hdlcLocalConnectConfirms,Counter32,read-only,,obsolete,,********* THIS OBJECT IS OBSOLETE ********* Count of local HDLC node connect request acceptances.
.1.3.6.1.4.1.11.2.14.3.8.6,ICF-ETWIST::hdlcLocalDisconnectRequests,Counter32,read-only,,obsolete,,********* THIS OBJECT IS OBSOLETE ********* Count of local HDLC node disconnect requests.
.1.3.6.1.4.1.11.2.14.3.8.7,ICF-ETWIST::hdlcLocalDisconnectConfirms,Counter32,read-only,,obsolete,,********* THIS OBJECT IS OBSOLETE ********* Count of local HDLC node disconnects granted.
.1.3.6.1.4.1.11.2.14.3.8.8,ICF-ETWIST::hdlcLocalState,Integer32,read-only,,obsolete,,********* THIS OBJECT IS OBSOLETE ********* Current local HDLC operational state.
.1.3.6.1.4.1.11.2.14.3.8.9,ICF-ETWIST::hdlcLocalAddress,INTEGER,read-write,,obsolete,hdlcDTEAddress(1):hdlcDCEAddress(3),********* THIS OBJECT IS OBSOLETE ********* The local HDLC address during communication with the remote node. This object is valid only if a brouter is on the remote end of the HDLC link. It can only be set to one of the two values: 'hdlcDTEAddress' or 'hdlcDTEAddress'. Furthermore, the setting of this object must be different from the setting of the hdlcRemoteHdlcAddress object. This object, along with hdlcRemoteAddress and hdlcRemoteNodeId, constitute a superobject. See hdlcRemoteNodeId for more details.
.1.3.6.1.4.1.11.2.14.3.8.10,ICF-ETWIST::hdlcLocalPhase,Integer32,read-only,,obsolete,,********* THIS OBJECT IS OBSOLETE ********* Current HDLC operational phase.
.1.3.6.1.4.1.11.2.14.3.9,ICF-ETWIST::hdlcRemoteTable,,not-accessible,,obsolete,,********* THIS OBJECT IS OBSOLETE ********* A list of hdlcRemote entries.
.1.3.6.1.4.1.11.2.14.3.9.1,ICF-ETWIST::hdlcRemoteIndex,Integer32,read-only,,obsolete,,********* THIS OBJECT IS OBSOLETE ********* Index into Hdlc remote statistics table on a per port basis. bridge.HP28674: There is only one 'real' instance of this object on port 2.
.1.3.6.1.4.1.11.2.14.3.9.2,ICF-ETWIST::hdlcRemoteResetRequests,Counter32,read-only,,obsolete,,********* THIS OBJECT IS OBSOLETE ********* Count of remote HDLC requests to reset current logical link.
.1.3.6.1.4.1.11.2.14.3.9.3,ICF-ETWIST::hdlcRemoteResetConfirms,Counter32,read-only,,obsolete,,********* THIS OBJECT IS OBSOLETE ********* Count of remote HDLC node link reset confirmations.
.1.3.6.1.4.1.11.2.14.3.9.4,ICF-ETWIST::hdlcRemoteConnectRequests,Counter32,read-only,,obsolete,,********* THIS OBJECT IS OBSOLETE ********* Count of remote HDLC node attempts to establish logical link.
.1.3.6.1.4.1.11.2.14.3.9.5,ICF-ETWIST::hdlcRemoteConnectConfirms,Counter32,read-only,,obsolete,,********* THIS OBJECT IS OBSOLETE ********* Count of remote HDLC node connect request acceptances.
.1.3.6.1.4.1.11.2.14.3.9.6,ICF-ETWIST::hdlcRemoteDisconnectRequests,Counter32,read-only,,obsolete,,********* THIS OBJECT IS OBSOLETE ********* Count of remote HDLC node disconnect requests.
.1.3.6.1.4.1.11.2.14.3.9.7,ICF-ETWIST::hdlcRemoteState,Integer32,read-only,,obsolete,,********* THIS OBJECT IS OBSOLETE ********* Current remote HDLC operational state.
.1.3.6.1.4.1.11.2.14.3.9.8,ICF-ETWIST::hdlcRemoteAddress,INTEGER,read-write,,obsolete,hdlcDTEAddress(1):hdlcDCEAddress(3),********* THIS OBJECT IS OBSOLETE ********* The remote HDLC address during communication with the local node. This object is valid only if a brouter is on the remote end of the HDLC link. It can only be set to one of the two values: 'hdlcDCEAddress' or 'hdlcDTEAddress'. Furthermore, the setting of this object must be different from the setting of the hdlcLocalAddress object. This object, along with hdlcLocalAddress and hdlcRemoteNodeId, constitute a superobject. See hdlcRemoteNodeId for more details.
.1.3.6.1.4.1.11.2.14.3.9.9,ICF-ETWIST::hdlcRemoteXidCommands,Counter32,read-only,,obsolete,,********* THIS OBJECT IS OBSOLETE ********* Count of XID commands issued by remote node.
.1.3.6.1.4.1.11.2.14.3.9.10,ICF-ETWIST::hdlcRemoteXidResponses,Counter32,read-only,,obsolete,,********* THIS OBJECT IS OBSOLETE ********* Count of XID responses issued by remote node.
.1.3.6.1.4.1.11.2.14.3.9.11,ICF-ETWIST::hdlcRemoteTestCommands,Counter32,read-only,,obsolete,,********* THIS OBJECT IS OBSOLETE ********* Count of Test commands issued by remote node.
.1.3.6.1.4.1.11.2.14.3.9.12,ICF-ETWIST::hdlcRemoteTestResponses,Counter32,read-only,,obsolete,,********* THIS OBJECT IS OBSOLETE ********* Count of Test responses issued by remote node.
.1.3.6.1.4.1.11.2.14.3.9.13,ICF-ETWIST::hdlcRemoteNodeId,Integer32,read-write,,obsolete,,********* THIS OBJECT IS OBSOLETE ********* Identification of the node at the opposite end of the HDLC link (eg. brouter or bridge). This object, along with hdlcLocalAddress and hdlcRemoteAddress, constitute a superobject. This object may only be set to one of the two values: 'remoteNodeBridge' or 'remoteNodeRouter'. If this object is set to 'remoteNodeUnknown', then hdlcLocalAddress and hdlcRemoteAddress need not be supplied, and will be ignored if provided. In a get, this object may report 'remoteNodeBridge', but attempts to set this object to 'remoteNodeBridge' will result in an error pdu with error type invalidData. If this object is set to 'remoteNodeRouter', then hdlcLocalAddress and hdlcRemoteAddress must be present and contiguous in the pdu in order to properly complete the superobject. The three objects may be in any order within the pdu.
.1.3.6.1.4.1.11.2.14.3.10,ICF-ETWIST::x25Table,,not-accessible,,obsolete,,********* THIS OBJECT IS OBSOLETE ********* A list of X25 entries.
.1.3.6.1.4.1.11.2.14.3.10.1,ICF-ETWIST::x25Index,Integer32,read-only,,obsolete,,********* THIS OBJECT IS OBSOLETE ********* Index into X25 remote timer table on a per port basis. bridge.HP28674: There is only one 'real' instance of this object on port 2.
.1.3.6.1.4.1.11.2.14.3.10.2,ICF-ETWIST::x25T1Timer,TimeTicks,read-write,,obsolete,,********* THIS OBJECT IS OBSOLETE ********* Period of time used to timeout retransmits for X25.
.1.3.6.1.4.1.11.2.14.3.10.3,ICF-ETWIST::x25N2Count,Integer32,read-write,,obsolete,,********* THIS OBJECT IS OBSOLETE ********* Number of retries to be performed during X.25 communication.
.1.3.6.1.4.1.11.2.14.3.10.4,ICF-ETWIST::x25T3Timer,TimeTicks,read-write,,obsolete,,********* THIS OBJECT IS OBSOLETE ********* Period of idle time before a disconnect is executed for X25.
.1.3.6.1.4.1.11.2.14.4,HP-ICF-OID::icfSecurity,,,,,,
.1.3.6.1.4.1.11.2.14.4.1,HP-ICF-SECURITY::icfSecurPassword,OCTET,read-write,,deprecated,,********* THIS OBJECT IS DEPRECATED ********* This variable contains a string which is used both as the community name for the password community, and as the login password for the console port. This community name is needed for most SET operations. In addition, the variables in the ICF security group are only visible within the password community, and must use the value of this variable as the community name for GET operations. If the value of this variable is equal to the null string, the community name 'public' or the null string will be treated the same as the password community. This object has been deprecated. Its functionality has been replaced by the icfCommunityTable.
.1.3.6.1.4.1.11.2.14.4.2,HP-ICF-SECURITY::icfSecurAuthAnyMgr,INTEGER,read-write,,deprecated,enabled(1):disabled(2),********* THIS OBJECT IS DEPRECATED ********* When this variable is set to enabled, any manager with a valid community name may perform SET operations on this device. In this configuration, entries in the icfSecurAuthMgrTable are used only for trap destinations. If this variable is set to disabled, a manager must be in the icfSecurAuthMgrTable and have a valid community name in order to perform SET operations. This object has been deprecated. Its functionality has been replaced by the icfAuthMgrTable.
.1.3.6.1.4.1.11.2.14.4.3,HP-ICF-SECURITY::icfSecurAuthMgrTable,,not-accessible,,deprecated,,********* THIS OBJECT IS DEPRECATED ********* This table contains a list of addresses of managers that are allowed to perform SET operations on this device, and controls the destination addresses for traps. If icfSecurAuthAnyMgr is set to disabled, a manager must be in this table and use the correct community name for the password community in order to perform a GET operation on this table. This table has been deprecated. It is replaced by the icfAuthMgrTable. The trap destination functionality has been replaced by the hpicfTrapDestTable.
.1.3.6.1.4.1.11.2.14.4.3.1,HP-ICF-SECURITY::icfSecurAuthMgrEntry,,not-accessible,icfAuthMgrIndex,deprecated,,********* THIS OBJECT IS DEPRECATED ********* An entry in the icfSecurAuthMgrTable containing information about a single manager. This table has been deprecated. It is replaced by the icfAuthMgrTable. The trap destination functionality has been replaced by the hpicfTrapDestTable.
.1.3.6.1.4.1.11.2.14.4.3.1.1,HP-ICF-SECURITY::icfAuthMgrIndex,Integer32,read-only,,deprecated,,********* THIS OBJECT IS DEPRECATED ********* This object contains the index which uniquely identifies this entry in the icfSecurAuthMgrTable. This table has been deprecated. It is replaced by the icfAuthMgrTable. The trap destination functionality has been replaced by the hpicfTrapDestTable.
.1.3.6.1.4.1.11.2.14.4.3.1.2,HP-ICF-SECURITY::icfAuthMgrIpAddress,IpAddress,read-write,,deprecated,,********* THIS OBJECT IS DEPRECATED ********* The IP address of a manager that is allowed to manage this device. Setting this variable to a nonzero value will clear the corresponding instance of the icfAuthMgrIpxAddress variable. This table has been deprecated. It is replaced by the icfAuthMgrTable. The trap destination functionality has been replaced by the hpicfTrapDestTable.
.1.3.6.1.4.1.11.2.14.4.3.1.3,HP-ICF-SECURITY::icfAuthMgrIpxAddress,OCTET,read-write,,deprecated,,********* THIS OBJECT IS DEPRECATED ********* The IPX address of a manager that is allowed to manage this device. Setting this variable to a valid IPX address will clear the corresponding instance of the icfAuthMgrIpAddress variable. This table has been deprecated. It is replaced by the icfAuthMgrTable. The trap destination functionality has been replaced by the hpicfTrapDestTable.
.1.3.6.1.4.1.11.2.14.4.3.1.4,HP-ICF-SECURITY::icfAuthMgrRcvTraps,INTEGER,read-write,,deprecated,enabled(1):disabled(2),********* THIS OBJECT IS DEPRECATED ********* If this variable is set to enabled, any traps generated by this device will be sent to the manager indicated by the corresponding instance of either icfAuthMgrIpAddress or icfAuthMgrIpxAddress, whichever is valid. This table has been deprecated. It is replaced by the icfAuthMgrTable. The trap destination functionality has been replaced by the hpicfTrapDestTable.
.1.3.6.1.4.1.11.2.14.4.4,HP-ICF-SECURITY::icfSecurIntruder,,,,,,
.1.3.6.1.4.1.11.2.14.4.4.1,HP-ICF-SECURITY::icfSecurIntruderFlag,INTEGER,read-write,,current,valid(1):invalid(2),If this object is set to 'valid', the remainder of the intruder objects contain information about an authentication failure. The Security LED on the device will blink if this flag is set to  'valid'. The intruder objects will not be overwritten as long as this flag is set to  'valid'. Setting this flag to 'invalid' will turn off the Security LED if there are no other current violations, and will allow the intruder objects to be overwritten by subsequent authentication failures.
.1.3.6.1.4.1.11.2.14.4.4.2,HP-ICF-SECURITY::icfSecurIntruderIpAddress,IpAddress,read-only,,current,,The IP address of the manager that caused the authentication failure. Only one of icfSecurIntruderIpAddress and icfSecurIntruderIPXAddress will be valid.
.1.3.6.1.4.1.11.2.14.4.4.3,HP-ICF-SECURITY::icfSecurIntruderIpxAddress,OCTET,read-only,,current,,The IPX address of the manager that caused the authentication failure. Only one of icfSecurIntruderIpAddress and icfSecurIntruderIPXAddress will be valid.
.1.3.6.1.4.1.11.2.14.4.4.4,HP-ICF-SECURITY::icfSecurIntruderTime,TimeTicks,read-only,,current,,The value of sysUpTime when the authentication failure occurred. A value of 0 indicates that the agent has been reset since this authentication failure occurred.
.1.3.6.1.4.1.11.2.14.4.5,HP-ICF-SECURITY::icfCommunityTable,,not-accessible,,deprecated,,******************DEPRECATED******************* This table contains information about community names known by this agent.
.1.3.6.1.4.1.11.2.14.4.5.1,HP-ICF-SECURITY::icfCommunityEntry,,not-accessible,icfCommunityIndex,deprecated,,******************DEPRECATED******************* An entry in the table, containing information about a single community name.
.1.3.6.1.4.1.11.2.14.4.5.1.1,HP-ICF-SECURITY::icfCommunityIndex,Integer32,not-accessible,,deprecated,,******************DEPRECATED******************* Uniquely identifies this community name entry.
.1.3.6.1.4.1.11.2.14.4.5.1.2,HP-ICF-SECURITY::icfCommunityName,OCTET,read-create,,deprecated,,******************DEPRECATED******************* Community name this entry is about. Not allowed to have two active rows with the same community name.
.1.3.6.1.4.1.11.2.14.4.5.1.3,HP-ICF-SECURITY::icfCommunityReadView,INTEGER,read-create,,deprecated,none(1):discovery(2):restricted(3):user(4):root(5),******************DEPRECATED******************* The MIB view used for read requests using this community name. One of the following: 'none' is the empty MIB view. 'discovery' has access to discovery objects, which will be enough to do an address search, send announce packets, and do a link test. This view also includes objects under the samplingProbe subtree. This view is typically used as a writeView for a community used by autodiscovery and autotopology applications. 'restricted' has access to a limited subset of the MIB, which includes monitoring objects and limited set of configuration objects. 'user' has access to everything except objects under the icfSecurity subtree. 'root' has access to everything, including the icfSecurity subtree.
.1.3.6.1.4.1.11.2.14.4.5.1.4,HP-ICF-SECURITY::icfCommunityWriteView,INTEGER,read-create,,deprecated,none(1):discovery(2):restricted(3):user(4):root(5),******************DEPRECATED******************* The MIB view used for write requests using this community name. One of the following: 'none' is the empty MIB view. 'discovery' has access to discovery objects, which will be enough to do an address search, send announce packets, and do a link test. This view also includes objects under the samplingProbe subtree. This view is typically used as a writeView for a community used by autodiscovery and autotopology applications. 'restricted' has access to a limited subset of the MIB, which includes monitoring objects and limited set of configuration objects. 'user' has access to everything except objects under the icfSecurity subtree. 'root' has access to everything, including the icfSecurity subtree.
.1.3.6.1.4.1.11.2.14.4.5.1.5,HP-ICF-SECURITY::icfCommunityStatus,INTEGER,read-create,,deprecated,active(1):notInService(2):notReady(3):createAndGo(4):createAndWait(5):destroy(6),******************DEPRECATED******************* Status of this entry.
.1.3.6.1.4.1.11.2.14.4.6,HP-ICF-SECURITY::icfAuthMgrTable,,not-accessible,,deprecated,,******************DEPRECATED******************* This table contains a list of manager addresses. Entries in this table are grouped by using a common value for icfCommunityIndex, that identifies the community name that the group of manager addresses has access to. A community name entry which has a set of entries in this table can only be used by requests originating from one of the addresses in the set. A community name entry which has no entries in this table can be used by requests originating from any address.
.1.3.6.1.4.1.11.2.14.4.6.1,HP-ICF-SECURITY::icfAuthMgrEntry,,not-accessible,icfCommunityIndex:icfAuthMgrSubIndex,deprecated,,******************DEPRECATED******************* An entry in the table, containing a single authorized manager address.
.1.3.6.1.4.1.11.2.14.4.6.1.1,HP-ICF-SECURITY::icfAuthMgrSubIndex,Integer32,not-accessible,,deprecated,,******************DEPRECATED******************* An index which uniquely identifies an address within a group.
.1.3.6.1.4.1.11.2.14.4.6.1.2,HP-ICF-SECURITY::icfAuthMgrAddrType,INTEGER,read-create,,deprecated,ip(1):ipx(2),******************DEPRECATED******************* The network type for this entry.
.1.3.6.1.4.1.11.2.14.4.6.1.3,HP-ICF-SECURITY::icfAuthMgrAddress,OCTET,read-create,,deprecated,,******************DEPRECATED******************* The manager address for this entry, formatted according to the value of icfAuthMgrAddrType. When icfAuthMgrAddrType is 'ip', this value will consist of four octets, containing the IP address of the manager in network byte order. When icfAuthMgrAddrType is 'ipx', this value will consist of ten octets. The first four octets will contain the IPX network number in network byte order, and the remaining six octets will contain the IPX node number in network byte order.
.1.3.6.1.4.1.11.2.14.4.6.1.4,HP-ICF-SECURITY::icfAuthMgrMask,OCTET,read-create,,deprecated,,******************DEPRECATED******************* This object is used to qualify the value of the corresponding instance of icfAuthMgrAddress. The semantics of this object depend on the corresponding value of icfAuthMgrAddrType. When icfAuthMgrType is 'ip', this object can be used to allow access by all managers on a particular IP subnet. When icfAuthMgrType is 'ipx', this object can be used to allow access by all managers with a particular IPX network number.
.1.3.6.1.4.1.11.2.14.4.6.1.5,HP-ICF-SECURITY::icfAuthMgrStatus,INTEGER,read-create,,deprecated,active(1):notInService(2):notReady(3):createAndGo(4):createAndWait(5):destroy(6),******************DEPRECATED******************* Status of this entry.
.1.3.6.1.4.1.11.2.14.4.7,HP-ICF-SECURITY::icfAuthIPMgrTable,,not-accessible,,current,,This table contains a list of IP manager addresses. This list is used grant or deny access to HTTP, telnet, and TFTP.
.1.3.6.1.4.1.11.2.14.4.7.1,HP-ICF-SECURITY::icfAuthIPMgrEntry,,not-accessible,icfAuthIPMgrIndex,current,,An entry in the table containing a single IP authorized manager address.
.1.3.6.1.4.1.11.2.14.4.7.1.1,HP-ICF-SECURITY::icfAuthIPMgrIndex,Integer32,not-accessible,,current,,An index which uniquely identifies an address within the group.
.1.3.6.1.4.1.11.2.14.4.7.1.2,HP-ICF-SECURITY::icfAuthIPMgrAddress,IpAddress,read-create,,deprecated,,**************deprecated********************* The IP address of the authorized manager for this entry. This object is deprecated new object icfAuthIPMgr InetAddress has been defined to hold version neutral address type.
.1.3.6.1.4.1.11.2.14.4.7.1.3,HP-ICF-SECURITY::icfAuthIPMgrMask,IpAddress,read-create,,deprecated,,**************deprecated********************** This object qualifies the value of the corresponding instance of icfAuthIPMgrAddress. This object can be used to allow access by all managers on a particular IP subnet. This object is deprecated the new objects which are defined to hold this is value are icfAuthIPMgrInetAddrMaskType and icfAuthIPMgrInetAddrMask.
.1.3.6.1.4.1.11.2.14.4.7.1.4,HP-ICF-SECURITY::icfAuthIPMgrAccess,INTEGER,read-create,,current,operator(1):manager(2),This object defines the access level for a given manager. Operator allows for read only access, and Manager allows for read/write access.
.1.3.6.1.4.1.11.2.14.4.7.1.5,HP-ICF-SECURITY::icfAuthIPMgrStatus,INTEGER,read-create,,current,active(1):notInService(2):notReady(3):createAndGo(4):createAndWait(5):destroy(6),Status of this entry.
.1.3.6.1.4.1.11.2.14.4.7.1.6,HP-ICF-SECURITY::icfAuthIPMgrInetAddrType,INTEGER,read-create,,current,unknown(0):ipv4(1):ipv6(2):ipv4z(3):ipv6z(4):dns(16),Specifies the type of address stored in  icfAuthIPMgrInetAddress object.
.1.3.6.1.4.1.11.2.14.4.7.1.7,HP-ICF-SECURITY::icfAuthIPMgrInetAddress,OCTET,read-create,,current,,The IP address of the authorized manager for this entry.This object can hold the version neutral IP address.
.1.3.6.1.4.1.11.2.14.4.7.1.8,HP-ICF-SECURITY::icfAuthIPMgrInetAddrMaskType,INTEGER,read-create,,current,unknown(0):ipv4(1):ipv6(2):ipv4z(3):ipv6z(4):dns(16),Specifies the type of IP Mask stored in  icfAuthIPMgrInetAddrMask object.
.1.3.6.1.4.1.11.2.14.4.7.1.9,HP-ICF-SECURITY::icfAuthIPMgrInetAddrMask,OCTET,read-create,,current,,This object qualifies the value of the corresponding instance of icfAuthIPMgrInetAddress. This object can be used to allow access by all managers on a particular IP subnet.This object can hold the version neutral IP address Mask.
.1.3.6.1.4.1.11.2.14.4.7.1.10,HP-ICF-SECURITY::icfAuthIPMgrAccessMethod,INTEGER,read-create,,current,all(1):ssh(2):telnet(3):web(4):snmp(5):tftp(6),This object defines the access method for a given manager. The different access methods are all, ssh, telnet, web, snmp, tftp
.1.3.6.1.4.1.11.2.14.5,HP-ICF-OID::icfConfig,,,,,,
.1.3.6.1.4.1.11.2.14.5.1,ICF-ETWIST::icfConfigIfTable,,not-accessible,,obsolete,,********* THIS OBJECT IS OBSOLETE ********* This table contains per-interface configuration information that will take effect after the next reset of the device.
.1.3.6.1.4.1.11.2.14.5.1.1,ICF-ETWIST::icfConfigIfEntry,,not-accessible,icfConfigIfIndex,obsolete,,********* THIS OBJECT IS OBSOLETE ********* An entry in the icfConfigIfTable containing information about a single interface.
.1.3.6.1.4.1.11.2.14.5.1.1.1,ICF-ETWIST::icfConfigIfIndex,Integer32,read-only,,obsolete,,********* THIS OBJECT IS OBSOLETE ********* The index of the interface which this information contains configuration information for. The interface identified by a particular value of this index is the same interface identified by the same value of ifIndex.
.1.3.6.1.4.1.11.2.14.5.1.1.2,ICF-ETWIST::icfConfigIfIpAddress,IpAddress,read-write,,obsolete,,********* THIS OBJECT IS OBSOLETE ********* This variable contains the IP address for this interface which will be used after the next reset of the device.
.1.3.6.1.4.1.11.2.14.5.1.1.3,ICF-ETWIST::icfConfigIfNetMask,IpAddress,read-write,,obsolete,,********* THIS OBJECT IS OBSOLETE ********* This variable contains the IP subnet mask for this interface which will be used after the next reset of the device.
.1.3.6.1.4.1.11.2.14.5.1.1.4,ICF-ETWIST::icfConfigIfDefaultGate,IpAddress,read-write,,obsolete,,********* THIS OBJECT IS OBSOLETE ********* This variable contains the IP address of the default router for this interface which will be used after the next reset of the device.
.1.3.6.1.4.1.11.2.14.5.2,ICF-ETWIST::icfConfigIpTTL,Integer32,read-write,,obsolete,,********* THIS OBJECT IS OBSOLETE ********* This variable contains the default IP time to live which will be used after the next reset of the device.
.1.3.6.1.4.1.11.2.14.5.3,ICF-ETWIST::icfConfigBootpEnable,INTEGER,read-write,,obsolete,enabled(1):disabled(2),********* THIS OBJECT IS OBSOLETE ********* Setting this flag to 'enabled' (the default) will clear any existing IP address configuration for this device, and will cause the device to use the Bootp protocol to obtain its IP configuration after the next reset. This flag must be set to 'disabled' in order to configure an IP address for the device. Setting this flag to 'disabled' will prevent the Bootp protocol from running. Setting this flag to 'disabled' when there is no IP address configured will disable the IP protocol stack on this device.
.1.3.6.1.4.1.11.2.14.6,HP-ICF-OID::icfEsSwitch,,,,,,
.1.3.6.1.4.1.11.2.14.6.1,HP-ICF-OID::hpEs,,,,,,
.1.3.6.1.4.1.11.2.14.6.2,HP-ICF-OID::hpEs2,,,,,,
.1.3.6.1.4.1.11.2.14.6.3,HP-ICF-OID::hpNetSwitch,,,,,,
.1.3.6.1.4.1.11.2.14.7,HP-ICF-OID::icfRouter,,,,,,
.1.3.6.1.4.1.11.2.14.8,HP-ICF-OID::icfDot12Draft,,,,,,
.1.3.6.1.4.1.11.2.14.8.1,HP-ICF-OID::icfVgRepeater,,,,,,
.1.3.6.1.4.1.11.2.14.8.1.1,ICF-VG-RPTR::icfVgBasic,,,,,,
.1.3.6.1.4.1.11.2.14.8.1.1.1,ICF-VG-RPTR::icfVgBasicRptr,,,,,,
.1.3.6.1.4.1.11.2.14.8.1.1.1.1,ICF-VG-RPTR::icfVgMACAddress,OCTET,read-only,,current,,The MAC address used by the repeater when it initiates training on the uplink port. Repeaters are allowed to train with an assigned MAC address or a null (all zeroes) MAC address.
.1.3.6.1.4.1.11.2.14.8.1.1.1.2,ICF-VG-RPTR::icfVgCurrentFramingType,INTEGER,read-only,,current,frameType88023(1):frameType88025(2),The type of framing (802.3 or 802.5) currently in use by the repeater.
.1.3.6.1.4.1.11.2.14.8.1.1.1.3,ICF-VG-RPTR::icfVgDesiredFramingType,INTEGER,read-write,,current,frameType88023(1):frameType88025(2),The type of framing which will be used by the repeater after the next time it is reset. The value of this object should be preserved across repeater resets and power failures
.1.3.6.1.4.1.11.2.14.8.1.1.1.4,ICF-VG-RPTR::icfVgFramingCapability,INTEGER,read-only,,current,frameType88023(1):frameType88025(2):frameTypeEither(3),The type of framing this repeater is capable of supporting.
.1.3.6.1.4.1.11.2.14.8.1.1.1.5,ICF-VG-RPTR::icfVgTrainingVersion,Integer32,read-only,,current,,The highest version bits (vvv bits) supported by the repeater during training.
.1.3.6.1.4.1.11.2.14.8.1.1.1.6,ICF-VG-RPTR::icfVgRepeaterGroupCapacity,Integer32,read-only,,current,,The icfVgGroupCapacity is the number of groups that can be contained within the repeater. Within each managed repeater, the groups are uniquely numbered in the range from 1 to icfVgRepeaterGroupCapacity. Some groups may not be present in the repeater, in which case the actual number of groups present will be less than icfVgRepeaterGroupCapacity. The number of groups present is never greater than icfVgRepeaterGroupCapacity.
.1.3.6.1.4.1.11.2.14.8.1.1.1.7,ICF-VG-RPTR::icfVgRepeaterHealthState,INTEGER,read-only,,current,other(1):ok(2):rptrFailure(3):groupFailure(4):portFailure(5):generalFailure(6),The icfVgRepeaterHealthState object indicates the operational state of the repeater. The icfVgRepeaterHealthText may be consulted for more specific information about the state of the  repeater's health. In the case of multiple kinds of failures (e.g., repeater failure and port failure), the value of this attribute shall reflect the highest priority failure in the following order, listed highest priority  first: rptrFailure(3) groupFailure(4) portFailure(5) generalFailure(6).
.1.3.6.1.4.1.11.2.14.8.1.1.1.8,ICF-VG-RPTR::icfVgRepeaterHealthText,OCTET,read-only,,current,,The health text object is a text string that  provides information relevant to the operational  state of the repeater. Agents may use this string to provide detailed information on current failures, including how they were detected, and/or instructions for problem resolution. The contents are agent specific.
.1.3.6.1.4.1.11.2.14.8.1.1.1.9,ICF-VG-RPTR::icfVgRepeaterReset,INTEGER,read-write,,current,noReset(1):reset(2),Setting this object to reset(2) causes the repeater to transition to its initial state as specified in clause 12 [IEEE Draft Std 802.12]. Setting this object to noReset(1) has no effect. The agent will always return the value noReset(1) when this object is read. After receiving a request to set this variable to reset(2), the agent is allowed to delay the reset for a short period. For example, the implementor may choose to delay the reset long enough to allow the SNMP response to be transmitted. In any event, the SNMP response must be transmitted. This action does not reset the management counters defined in this document nor does it affect the icfVgPortAdminStatus parameters. Included in this action is the execution of a disruptive Self-Test with the following characteristics: a) The nature of the tests is not specified. b) The test resets the repeater but without affecting management information about the repeater. c) The test does not inject packets onto any segment. d) Packets received during the test may or may not be transferred. e) The test does not interfere with management functions. After performing this self-test, the agent will update the repeater health information (including icfVgRepeaterHealthState and icfVgRepeaterHealthText).
.1.3.6.1.4.1.11.2.14.8.1.1.1.10,ICF-VG-RPTR::icfVgRepeaterNonDisruptTest,INTEGER,read-write,,current,noSelfTest(1):selfTest(2),Setting this object to selfTest(2) causes the repeater to perform an agent-specific, non-disruptive self-test that has the following characteristics: a) The nature of the tests is not specified. b) The test does not change the state of the repeater or management information about the repeater. c) The test does not inject packets onto any segment.  d) The test does not prevent the relay of any packets. e) The test does not interfere with management functions. After performing this test, the agent will update the repeater health information (including icfVgRepeaterHealthState and icfVgRepeaterHealthText). Note that this definition allows returning an 'okay' result after doing a trivial test. Setting this object to noSelfTest(1) has no effect. The agent will always return the value noSelfTest(1) when this object is read.
.1.3.6.1.4.1.11.2.14.8.1.1.2,ICF-VG-RPTR::icfVgBasicGroup,,,,,,
.1.3.6.1.4.1.11.2.14.8.1.1.2.1,ICF-VG-RPTR::icfVgBasicGroupTable,,not-accessible,,current,,A table containing information about groups of ports.
.1.3.6.1.4.1.11.2.14.8.1.1.2.1.1,ICF-VG-RPTR::icfVgBasicGroupEntry,,not-accessible,icfVgGroupIndex,current,,An entry in the icfVgBasicGroupTable, containing information about a single group of ports.
.1.3.6.1.4.1.11.2.14.8.1.1.2.1.1.1,ICF-VG-RPTR::icfVgGroupIndex,Integer32,not-accessible,,current,,This object identifies the group within the repeater for which this entry contains information. This value is never greater than icfVgRepeaterGroupCapacity.
.1.3.6.1.4.1.11.2.14.8.1.1.2.1.1.2,ICF-VG-RPTR::icfVgGroupDescr,OCTET,read-only,,current,,A textual description of the group. This value should include the full name and version identification of the group's hardware type and indicate how the group is differentiated from other types of groups in the repeater. 'Plug-in Module, Rev A' or 'Barney Rubble 100BaseVG 4-port socket Version 2.1' are examples of valid group descriptions. It is mandatory that this only contain printable ASCII characters.
.1.3.6.1.4.1.11.2.14.8.1.1.2.1.1.3,ICF-VG-RPTR::icfVgGroupObjectID,OBJECT,read-only,,current,,The vendor's authoritative identification of the group. This value may be allocated within the SMI enterprises subtree (1.3.6.1.4.1) and provides a straight-forward and unambiguous means for determining what kind of group is being managed. For example, this object could take the value 1.3.6.1.4.1.4242.1.2.14 if vendor 'Flintstones, Inc.' was assigned the subtree 1.3.6.1.4.1.4242, and had assigned the identifier 1.3.6.1.4.1.4242.1.2.14 to its 'Wilma Flintstone 6-Port Plug-in Module.'
.1.3.6.1.4.1.11.2.14.8.1.1.2.1.1.4,ICF-VG-RPTR::icfVgGroupOperStatus,INTEGER,read-only,,current,other(1):operational(2):malfunctioning(3):notPresent(4):underTest(5):resetInProgress(6),An object that indicates the operational status of the group. A status of notPresent(4) indicates that the group is temporarily or permanently physically and/or logically not a part of the repeater. It is an implementation-specific matter as to whether the agent effectively removes notPresent entries from the table. A status of operational(2) indicates that the group is functioning, and a status of malfunctioning(3) indicates that the group is malfunctioning in some way.
.1.3.6.1.4.1.11.2.14.8.1.1.2.1.1.5,ICF-VG-RPTR::icfVgGroupLastOperStatusChange,TimeTicks,read-only,,current,,An object that contains the value of sysUpTime at the time that the value of the icfVgGroupOperStatus object for this group last changed. A value of zero indicates that the group's operational status has not changed since the agent last restarted.
.1.3.6.1.4.1.11.2.14.8.1.1.2.1.1.6,ICF-VG-RPTR::icfVgGroupPortCapacity,Integer32,read-only,,current,,The icfVgGroupPortCapacity is the number of ports that can be contained within the group. Valid range is 1-1024. Within each group, the ports are uniquely numbered in the range from 1 to icfVgGroupPortCapacity. Some ports may not be present in a given group instance, in which case the actual number of ports present is less than icfVgGroupPortCapacity. The number of ports present is never greater than icfVgGroupPortCapacity.
.1.3.6.1.4.1.11.2.14.8.1.1.2.1.1.7,ICF-VG-RPTR::icfVgGroupCablesBundled,INTEGER,read-write,,current,someCablesBundled(1):noCablesBundled(2),This configuration flag is used to select either bundled or unbundled cabling. When this flag is 'someCablesBundled(1)' and the port is not promiscuous or cascaded, frames received from ports on this group and destined to go out multiple ports on this group will be buffered completely before being repeated out ports on this group. When this flag is 'noCablesBundled(2)' or the port is promiscuous or cascaded, these frames will be repeated out ports on this group as the frame is being received. Note that the value 'someCablesBundled(1)' will work in the vast majority of installations, regardless of whether or not any cables are physically in a bundle, since promiscuous and cascaded ports automatically avoid the store and forward. The main situation in which 'noCablesBundled(2)' is beneficial is when there is a large amount of multicast traffic and the cables are not in a bundle. The value of this object should be preserved across repeater resets and power failures.
.1.3.6.1.4.1.11.2.14.8.1.1.3,ICF-VG-RPTR::icfVgBasicPort,,,,,,
.1.3.6.1.4.1.11.2.14.8.1.1.3.1,ICF-VG-RPTR::icfVgBasicPortTable,,not-accessible,,current,,A table containing information about ports.
.1.3.6.1.4.1.11.2.14.8.1.1.3.1.1,ICF-VG-RPTR::icfVgBasicPortEntry,,not-accessible,icfVgPortGroupIndex:icfVgPortIndex,current,,An entry in the icfVgBasicPortTable, containing information about a single port.
.1.3.6.1.4.1.11.2.14.8.1.1.3.1.1.1,ICF-VG-RPTR::icfVgPortGroupIndex,Integer32,not-accessible,,current,,This object identifies the group containing the port for which this entry contains information.
.1.3.6.1.4.1.11.2.14.8.1.1.3.1.1.2,ICF-VG-RPTR::icfVgPortIndex,Integer32,not-accessible,,current,,This object identifies the port within the group for which this entry contains information. This value can never be greater than icfVgGroupPortCapacity for the associated group.
.1.3.6.1.4.1.11.2.14.8.1.1.3.1.1.3,ICF-VG-RPTR::icfVgPortType,INTEGER,read-only,,current,cascadeExternal(1):cascadeInternal(2):localExternal(3):localInternal(4),Describes the type of port. One of the following: cascadeExternal - Port is an uplink with physical connections which are  externally visible cascadeInternal - Port is an uplink with physical connections which are not externally visible, such as a connection to an internal backplane in a chassis localExternal - Port is a downlink or local port with externally visible connections localInternal - Port is a downlink or local port with connections which are not externally visible, such as a connection to an internal agent 'internal' is used to identify ports which place traffic into the repeater, but do not have any external connections. Note that both DTE and cascaded repeater downlinks are considered 'local' ports.
.1.3.6.1.4.1.11.2.14.8.1.1.3.1.1.4,ICF-VG-RPTR::icfVgPortAdminStatus,INTEGER,read-write,,current,enabled(1):disabled(2),Port enable/disable function. Enabling a disabled port will cause training to be initiated. Setting this object to disabled(2) disables the port. A disabled port neither transmits nor receives. Once disabled, a port must be explicitly enabled to restore operation. A port which is disabled when power is lost or when a reset is exerted shall remain disabled when normal operation resumes.
.1.3.6.1.4.1.11.2.14.8.1.1.3.1.1.5,ICF-VG-RPTR::icfVgPortStatus,INTEGER,read-only,,current,active(1):inactive(2):training(3),Current status for the port as specified by the PORT_META_STATE in the port process module of clause 12 [IEEE Draft Std 802.12]. During initialization or any link warning conditions, icfVgPortStatus will be 'inactive(2)'. When Training_Up is received by the repeater on a local port (or when Training_Down is received on a cascade port), icfVgPortStatus will change to 'training(3)' and icfVgTrainingResult can be monitored to see the detailed status regarding training. When 24 consecutive good FCS packets are received and the configuration bits are OK, icfVgPortStatus will change to 'active(1)'. A disabled port shall have a port status of 'inactive(2)'.
.1.3.6.1.4.1.11.2.14.8.1.1.3.1.1.6,ICF-VG-RPTR::icfVgPortSupportedPromiscMode,INTEGER,read-only,,current,singleModeOnly(1):singleOrPromiscMode(2):promiscModeOnly(3),This object describes whether the port hardware is capable of supporting promiscuous mode, single address mode (i.e., repeater filters unicasts not addressed to the end station attached to this port), or both. A port for which icfVgPortType is equal to 'cascadeInternal' or 'cascadeExternal' will always have a value of 'promiscModeOnly' for this object.
.1.3.6.1.4.1.11.2.14.8.1.1.3.1.1.7,ICF-VG-RPTR::icfVgPortSupportedCascadeMode,INTEGER,read-only,,current,endNodesOnly(1):endNodesOrRepeaters(2):cascadePort(3),This object describes whether the port hardware is capable of supporting cascaded repeaters, end nodes, or both. A port for which icfVgPortType is equal to 'cascadeInternal' or 'cascadeExternal' will always have a value of 'cascadePort' for this object.
.1.3.6.1.4.1.11.2.14.8.1.1.3.1.1.8,ICF-VG-RPTR::icfVgPortAllowedTrainType,INTEGER,read-write,,current,allowEndNodesOnly(1):allowPromiscuousEndNodes(2):allowEndNodesOrRepeaters(3):allowAnything(4),This security object is set by the network manager to configure what type of device is permitted to connect to the port. One of the following values: allowEndNodesOnly - only non-promiscuous end nodes permitted. allowPromiscuousEndNodes - promiscuous or non- promiscuous end nodes permitted allowEndNodesOrRepeaters - repeaters or non- promiscuous end nodes permitted allowAnything - repeaters, promiscuous or non-promiscuous end nodes permitted For a port for which icfVgPortType is equal to 'cascadeInternal' or 'cascadeExternal', the corresponding instance of this object may not be set to 'allowEndNodesOnly' or 'allowPromiscuousEndNodes'. The agent must reject a SET of this object if the value includes no capabilities that are supported by this port's hardware, as defined by the values of the corresponding instances of icfVgPortSupportedPromiscMode and icfVgPortSupportedCascadeMode.
.1.3.6.1.4.1.11.2.14.8.1.1.3.1.1.9,ICF-VG-RPTR::icfVgPortLastTrainConfig,OCTET,read-only,,current,,This 16 bit field contains the most recent training configuration in an error-free training frame sent by the end node connected to the port. For cascade ports, this is the responder's configuration field from the most recent error-free training response frame received in response to training initiated by this repeater. This object is formatted as follows: First Octet: Second Octet: 7 6 5 4 3 2 1 0 7 6 5 4 3 2 1 0 +-+-+-+-+-+-+-+-+ +-+-+-+-+-+-+-+-+ |v|v|v|0|0|0|0|0| |0|0|0|F|F|P|P|R| +-+-+-+-+-+-+-+-+ +-+-+-+-+-+-+-+-+ vvv: The version of the 802.12 training protocol with which the training initiator is compliant FF: 00 = frameType88023 is requested 01 = frameType88025 is requested 10 = reserved 11 = either frameType88023 or frameType88025 is acceptable PP: 00 = request singleAddressMode 01 = request promiscuousMode 10 = reserved 11 = reserved R: 0 = request is from an end node 1 = request is from a repeater
.1.3.6.1.4.1.11.2.14.8.1.1.3.1.1.10,ICF-VG-RPTR::icfVgPortTrainingResult,OCTET,read-only,,current,,This 18 bit field is used to indicate the result of training. It contains two bits which indicate if error-free training frames have been received, and it also contains the 16 bits of the most recent valid training response frame on the port. First Octet: Second Octet: Third Octet: 7 6 5 4 3 2 1 0 7 6 5 4 3 2 1 0 7 6 5 4 3 2 1 0 +-+-+-+-+-+-+-+-+ +-+-+-+-+-+-+-+-+ +-+-+-+-+-+-+-+-+ |0|0|0|0|0|0|V|G| |v|v|v|D|C|N|0|0| |0|0|0|F|F|P|P|R| +-+-+-+-+-+-+-+-+ +-+-+-+-+-+-+-+-+ +-+-+-+-+-+-+-+-+ V: Valid: set when at least one error-free training frame has been received. Indicates the 16 training configuration bits in icfVgPortLastTrainConfig and icfVgPortTrainingResult contain valid information. This bit is cleared when icfVgPortStatus transitions to the  'inactive' or 'training' state. G: LinkGood: indicates the link hardware is OK. Set if 24 consecutive error-free training packets have been received. Cleared when a training packet with errors is received, and when icfVgPortStatus transitions to the 'inactive' or 'training' state. vvv: The version of the 802.12 training protocol with which the training responder is compliant D: 0 = no duplicate address has been detected 1 = duplicate address has been detected C: 0 = the requested configuration is compatible with the port 1 = the requested configuration is not compatible with the port. The FF, PP and R bits indicate the configuration which would be allowed (providing  N = 0). N: 0 = access will be allowed, providing the configuration is compatible (C = 0). 1 = access not allowed because of security restrictions FF: 00 = frameType88023 will be used 01 = frameType88025 will be used 10 = reserved 11 = reserved PP: 00 = singleAddressMode will be used 01 = promiscuousMode will be used 10 = reserved 11 = reserved R: 0 = requested access as an end node is allowed 1 = requested access as a repeater is allowed If the port is in training, a management station can examine this object to see if any training packets have been passed successfully. If there have been any good training packets, the Valid bit will be set and the management station can examine the 16 training response bits to see if there is a duplicate address, configuration, or security problem. Note that on a repeater local port, this repeater generates the training response bits, while on the cascade port, the higher level repeater originated the training response bits.
.1.3.6.1.4.1.11.2.14.8.1.1.3.1.1.11,ICF-VG-RPTR::icfVgPortPriorityEnable,INTEGER,read-write,,current,true(1):false(2),A configuration flag used to determine whether the repeater will service high priority requests received on the port as high priority or normal priority. When 'false', high priority requests on this port will be serviced as normal priority. The value of this object should be preserved across repeater resets and power failures. The setting of this object has no effect on a cascade port.
.1.3.6.1.4.1.11.2.14.8.1.1.3.1.1.12,ICF-VG-RPTR::icfVgPortMediaType,INTEGER,read-only,,current,other(1):unknown(2):pmdMissing(3):utp4(4):stp2(5):fibre(6),The type of physical media in use. One of the following values: other undefined unknown true state not known pmdMissing PMD device not attached utp4 4-pair unshielded twisted pair stp2 2-pair shielded twisted pair fibre 802.12 fibre optic cabling This object may be 'unknown' if the implementation is not capable of identifying the PMD media type, or whether or not the PMD is even present.
.1.3.6.1.4.1.11.2.14.8.1.2,ICF-VG-RPTR::icfVgMonitor,,,,,,
.1.3.6.1.4.1.11.2.14.8.1.2.1,ICF-VG-RPTR::icfVgMonRptr,,,,,,
.1.3.6.1.4.1.11.2.14.8.1.2.2,ICF-VG-RPTR::icfVgMonGroup,,,,,,
.1.3.6.1.4.1.11.2.14.8.1.2.3,ICF-VG-RPTR::icfVgMonPort,,,,,,
.1.3.6.1.4.1.11.2.14.8.1.2.3.1,ICF-VG-RPTR::icfVgMonPortTable,,not-accessible,,current,,A table of performance and error statistics for the ports.
.1.3.6.1.4.1.11.2.14.8.1.2.3.1.1,ICF-VG-RPTR::icfVgMonPortEntry,,not-accessible,icfVgPortGroupIndex:icfVgPortIndex,current,,An entry in the icfVgMonPortTable, containing performance and error statistics for a single port.
.1.3.6.1.4.1.11.2.14.8.1.2.3.1.1.1,ICF-VG-RPTR::icfVgPortReadableFrames,Counter32,read-only,,current,,This object is the number of good frames of valid frame length that have been received on this port. This counter is incremented by one for each frame received on the port which is not counted by icfVgPortIPMFrames or icfVgPortDataErrorFrames.
.1.3.6.1.4.1.11.2.14.8.1.2.3.1.1.2,ICF-VG-RPTR::icfVgPortReadableOctets,Counter32,read-only,,current,,This object is a count of the number of octets contained in good frames that have been received on this port. This counter is incremented by OctetCount for each frame received on this port which has been determined to be a readable frame (i.e. each frame counted by icfVgPortReadableFrames). Note that this counter will roll over very quickly. It is provided for backward compatibility for Network Management protocols that do not support 64 bit counters (e.g. SNMP version 1).
.1.3.6.1.4.1.11.2.14.8.1.2.3.1.1.3,ICF-VG-RPTR::icfVgPortUnreadableOctets,Counter32,read-only,,current,,This object is a count of the number of octets contained in invalid frames that have been received on this port. This counter is incremented by OctetCount for each frame received on this port which is counted by icfVgPortIPMFrames or icfVgPortDataErrorFrames. This counter can be combined with icfVgPortReadableOctets to calculate network utilization. Note that this counter will roll over very quickly. It is provided for backward compatibility for Network Management protocols that do not support 64 bit counters (e.g. SNMP version 1).
.1.3.6.1.4.1.11.2.14.8.1.2.3.1.1.4,ICF-VG-RPTR::icfVgPortHighPriorityFrames,Counter32,read-only,,current,,This object is a count of high priority frames that have been received on this port. This counter is incremented by one for each high priority frame received on this port, including readable, invalid, and training frames. This counter does not include normal priority frames which were priority promoted.
.1.3.6.1.4.1.11.2.14.8.1.2.3.1.1.5,ICF-VG-RPTR::icfVgPortHighPriorityOctets,Counter32,read-only,,current,,This object is a count of the number of octets contained in high priority frames that have been received on this port. This counter is incremented by OctetCount for each frame received on this port which is counted by icfVgPortHighPriorityFrames. Note that this counter will roll over very quickly. It is provided for backward compatibility for Network Management protocols that do not support 64 bit counters (e.g. SNMP version 1).
.1.3.6.1.4.1.11.2.14.8.1.2.3.1.1.6,ICF-VG-RPTR::icfVgPortBroadcastFrames,Counter32,read-only,,current,,This object is a count of broadcast packets that have been received on this port. This counter is incremented by one for each readable frame received on this port whose destination MAC address is the broadcast address. Frames counted by this counter are also counted by icfVgPortReadableFrames.
.1.3.6.1.4.1.11.2.14.8.1.2.3.1.1.7,ICF-VG-RPTR::icfVgPortMulticastFrames,Counter32,read-only,,current,,This object is a count of multicast packets that have been received on this port. This counter is incremented by one for each readable frame received on this port whose destination MAC address has the group address bit set, but is not the broadcast address. Frames counted by this counter are also counted by icfVgPortReadableFrames, but not by icfVgPortBroadcastFrames
.1.3.6.1.4.1.11.2.14.8.1.2.3.1.1.8,ICF-VG-RPTR::icfVgPortIPMFrames,Counter32,read-only,,current,,This object is a count of the number of frames that have been received on this port with an invalid packet marker and no PMI errors. A repeater will write an invalid packet marker to the end of a frame containing errors as it is forwarded through the repeater to the other ports. This counter is incremented by one for each frame received on this port which has had an invalid packet marker added to the end of the frame. This counter indicates problems with remote cable segments, as opposed to problems with cables directly attached to this repeater.
.1.3.6.1.4.1.11.2.14.8.1.2.3.1.1.9,ICF-VG-RPTR::icfVgPortDataErrorFrames,Counter32,read-only,,current,,This object is a count of errored frames received on this port. This counter is incremented by one for each frame received on this port with any of the following errors: bad FCS (with no IPM), PMI errors (excluding frames with an IPM error as the only PMI error), or undersize (with no IPM). Does not include packets counted by icfVgPortIPMFrames, icfVgPortOversizeFrames, or icfVgPortNullAddressedFrames. This counter indicates problems with the cable directly attached to this repeater, while icfVgPortIPMFrames indicates problems with remote cables attached to other repeaters.
.1.3.6.1.4.1.11.2.14.8.1.2.3.1.1.10,ICF-VG-RPTR::icfVgPortPriorityPromotions,Counter32,read-only,,current,,This counter is incremented by one each time the priority promotion timer has expired on this port and a normal priority frame was priority promoted.
.1.3.6.1.4.1.11.2.14.8.1.2.3.1.1.11,ICF-VG-RPTR::icfVgPortHCReadableOctets,Counter64,read-only,,current,,This object is a count of the number of octets contained in good frames that have been received on this port. This counter is incremented by OctetCount for each frame received on this port which has been determined to be a readable frame (i.e. each frame counted by icfVgPortReadableFrames). This counter is a 64 bit version of icfVgPortReadableOctets. It should be used by Network Management protocols which support 64 bit counters (e.g. SNMPv2).
.1.3.6.1.4.1.11.2.14.8.1.2.3.1.1.12,ICF-VG-RPTR::icfVgPortHCUnreadableOctets,Counter64,read-only,,current,,This object is a count of the number of octets contained in invalid frames that have been received on this port. This counter is incremented by OctetCount for each frame received on this port which is counted by icfVgPortIPMFrames or icfVgPortDataErrorFrames. This counter can be combined with icfVgPortHCReadableOctets to calculate network utilization. This counter is a 64 bit version of icfVgPortUnReadableOctets. It should be used by Network Management protocols which support 64 bit counters (e.g. SNMPv2).
.1.3.6.1.4.1.11.2.14.8.1.2.3.1.1.13,ICF-VG-RPTR::icfVgPortHCHighPriorityOctets,Counter64,read-only,,current,,This object is a count of the number of octets contained in high priority frames that have been received on this port. This counter is incremented by OctetCount for each frame received on this port which is counted by icfVgPortHighPriorityFrames. This counter is a 64 bit version of icfVgPortHighPriorityOctets. It should be used by Network Management protocols which support 64 bit counters (e.g. SNMPv2).
.1.3.6.1.4.1.11.2.14.8.1.2.3.1.1.14,ICF-VG-RPTR::icfVgPortHCNormPriorityOctets,Counter64,read-only,,current,,This object is a count of the number of octets contained in normal priority frames that have been received on this port. This counter is incremented by OctetCount for each frame received on this port which is counted by icfVgPortNormPriorityFrames. This counter is a 64 bit version of icfVgPortNormPriorityOctets. It should be used by Network Management protocols which support 64 bit counters (e.g. SNMPv2).
.1.3.6.1.4.1.11.2.14.8.1.2.3.1.1.15,ICF-VG-RPTR::icfVgPortNormPriorityFrames,Counter32,read-only,,current,,This object is a count of normal priority frames that have been received on this port. This counter is incremented by one for each normal priority frame received on this port. This counter includes both good and bad normal priority frames, as well as normal priority training frames and normal priority frames which were priority promoted.
.1.3.6.1.4.1.11.2.14.8.1.2.3.1.1.16,ICF-VG-RPTR::icfVgPortNormPriorityOctets,Counter32,read-only,,current,,This object is a count of the number of octets contained in normal priority frames that have been received on this port. This counter is incremented by OctetCount for each frame received on this port which is counted by icfVgPortNormPriorityFrames. Note that this counter will roll over very quickly. It is provided for backward compatibility for Network Management protocols that do not support 64 bit counters (e.g. SNMP version 1).
.1.3.6.1.4.1.11.2.14.8.1.2.3.1.1.17,ICF-VG-RPTR::icfVgPortNullAddressedFrames,Counter32,read-only,,current,,This object is a count of null addressed packets that have been received on this port. This counter is incremented by one for each frame received on this port with a destination MAC address consisting of all zero bits. Both void and training frames are included in this counter.
.1.3.6.1.4.1.11.2.14.8.1.2.3.1.1.18,ICF-VG-RPTR::icfVgPortOversizeFrames,Counter32,read-only,,current,,This object is a count of oversize frames received on this port. This counter is incremented by one for each frame received on this port whose OctetCount is larger than the maximum legal frame size. The frame size which causes this counter to increment is dependent on the current value of icfVgCurrentFramingType. When icfVgCurrentFramingType is equal to frameType88023 this counter will increment for frames that are 1519 octets or larger. When icfVgCurrentFramingType is equal to frameType88025 this counter will increment for frames that are 4521 octets or larger.
.1.3.6.1.4.1.11.2.14.8.1.2.3.1.1.19,ICF-VG-RPTR::icfVgPortTransitionToTrainings,Counter32,read-only,,current,,This counter is incremented by one each time the icfVgPortStatus object for this port transitions into the 'training' state.
.1.3.6.1.4.1.11.2.14.8.1.3,ICF-VG-RPTR::icfVgAddrTrack,,,,,,
.1.3.6.1.4.1.11.2.14.8.1.3.1,ICF-VG-RPTR::icfVgAddrTrackRptr,,,,,,
.1.3.6.1.4.1.11.2.14.8.1.3.2,ICF-VG-RPTR::icfVgAddrTrackGroup,,,,,,
.1.3.6.1.4.1.11.2.14.8.1.3.3,ICF-VG-RPTR::icfVgAddrTrackPort,,,,,,
.1.3.6.1.4.1.11.2.14.8.1.3.3.1,ICF-VG-RPTR::icfVgAddrTrackTable,,not-accessible,,current,,Table of address mapping information about the ports.
.1.3.6.1.4.1.11.2.14.8.1.3.3.1.1,ICF-VG-RPTR::icfVgAddrTrackEntry,,not-accessible,icfVgPortGroupIndex:icfVgPortIndex,current,,An entry in the table, containing address mapping information about a single port.
.1.3.6.1.4.1.11.2.14.8.1.3.3.1.1.1,ICF-VG-RPTR::icfVgAddrLastTrainedAddress,OCTET,read-only,,current,,This object is the MAC address of the last station which succeeded in training on this port. A cascaded repeater may train using the null address. If no stations have succeeded in training on this port since the agent began monitoring the port activity, the agent shall return a string of length zero.
.1.3.6.1.4.1.11.2.14.8.1.3.3.1.1.2,ICF-VG-RPTR::icfVgAddrTrainedAddrChanges,Counter32,read-only,,current,,This counter is incremented by one for each time that the icfVgAddrLastTrainedAddress object for this port has changed.
.1.3.6.1.4.1.11.2.14.8.1.3.3.1.1.3,ICF-VG-RPTR::icfVgRptrDetectedDupAddress,INTEGER,read-only,,current,true(1):false(2),This object is used to indicate that the repeater detected an error-free training frame on this port with a source MAC address which matches the value of icfVgAddrLastTrainedAddress of another active port. This is reset to 'false' when an error-free training frame is received with a source MAC address which does not match icfVgAddrLastTrainedAddress of another port which is active. For the cascade port, this object will be 'true' if the 'D' bit in the most recently received error-free training response frame was set.
.1.3.6.1.4.1.11.2.14.8.1.3.3.1.1.4,ICF-VG-RPTR::icfVgMgrDetectedDupAddress,INTEGER,read-write,,current,true(1):false(2),This object can be set by a management station when it detects that there is a duplicate MAC address. This object is OR'd with icfVgRptrDetectedDupAddress to form the value of the 'D' bit in training response frames on this port. The purpose of this object is to provide a means for network management software to inform an end station that it is using a duplicate station address. Setting this object does not affect the current state of the link; the end station will not be informed of the duplicate address until it retrains for some reason. Note that regardless of its station address, the end station will not be able to train successfully until the network management software has set this object back to 'false'. Although this object exists on cascade ports, it does not perform any function since this repeater is the initiator of training on a cascade port.
.1.3.6.1.4.1.11.2.14.8.1.4,ICF-VG-RPTR::icfVgRptrTraps,,,,,,
.1.3.6.1.4.1.11.2.14.8.1.4.0,ICF-VG-RPTR::icfVgRptrTrapsPrefix,,,,,,
.1.3.6.1.4.1.11.2.14.8.1.4.0.1,ICF-VG-RPTR::icfVgRptrHealth,,,,,,A icfVgRptrHealth trap conveys information related to the operational state of the repeater. This trap is sent either when the value of icfVgRepeaterHealthState changes, or upon completion of a non-disruptive test. The icfVgRptrHealth trap is not sent as a result of powering up a repeater. The icfVgRptrHealth trap must contain the icfVgRepeaterHealthState object. The agent may optionally include the icfVgRepeaterHealthText object in the varBind list. See the icfVgRepeaterHealthState and icfVgRepeaterHealthText objects for descriptions of the information that is sent. The agent must throttle the generation of consecutive icfVgRptrHealth traps so that there is at least a five-second gap between traps of this type. When traps are throttled, they are dropped, not queued for sending at a future time. (Note that 'generating' a trap means sending to all configured recipients.)
.1.3.6.1.4.1.11.2.14.8.1.4.0.3,ICF-VG-RPTR::icfVgRptrResetEvent,,,,,,An icfVgRptrResetEvent trap conveys information related to the operational state of the repeater. This trap is sent on completion of a repeater reset action. A repeater reset action is defined as a transition to its initial state as specified in clause 12 [IEEE Draft Std 802.12] when triggered by a management command. The icfVgRptrResetEvent trap is not sent when the agent restarts and sends an SNMP coldStart or warmStart trap. However, it is recommended that an 802.12 repeater agent send the icfVgRepeaterHealthState object as an optional object with its coldStart and warmStart trap PDUs. The icfVgRptrResetEvent trap must contain the icfVgRepeaterHealthState object. The agent may optionally include the icfVgRepeaterHealthText object in the varBind list. See the icfVgRepeaterHealthState and icfVgRepeaterHealthText objects for descriptions of the information that is sent. The agent must throttle the generation of consecutive icfVgRptrResetEvent traps so that there is at least a five-second gap between traps of this type. When traps are throttled, they are dropped, not queued for sending at a future time. (Note that 'generating' a trap means sending to all configured recipients.)
.1.3.6.1.4.1.11.2.14.8.2,HP-ICF-OID::icfVgInterface,,,,,,
.1.3.6.1.4.1.11.2.14.9,HP-ICF-OID::hpEntityMIB,,,,,,
.1.3.6.1.4.1.11.2.14.9.1,HP-ENTITY-MIB::hpEntityMIBObjects,,,,,,
.1.3.6.1.4.1.11.2.14.9.1.1,HP-ENTITY-MIB::hpEntityPhysical,,,,,,
.1.3.6.1.4.1.11.2.14.9.1.1.1,HP-ENTITY-MIB::hpEntPhysicalTable,,not-accessible,,obsolete,,This table contains one row per physical entity. There is always at least one row for an 'overall' physical entity.
.1.3.6.1.4.1.11.2.14.9.1.1.1.1,HP-ENTITY-MIB::hpEntPhysicalEntry,,not-accessible,hpEntPhysicalIndex,obsolete,,Information about a particular physical entity. Each entry provides objects (hpEntPhysicalDescr, hpEntPhysicalVendorType, and hpEntPhysicalClass) to help an NMS identify and characterize the entry, and objects (hpEntPhysicalContainedIn and hpEntPhysicalParentRelPos) to help an NMS relate the particular entry to other entries in this table.
.1.3.6.1.4.1.11.2.14.9.1.1.1.1.1,HP-ENTITY-MIB::hpEntPhysicalIndex,INTEGER,not-accessible,,obsolete,,The index for this entry.
.1.3.6.1.4.1.11.2.14.9.1.1.1.1.2,HP-ENTITY-MIB::hpEntPhysicalDescr,OCTET,read-only,,obsolete,,A textual description of physical entity. This object should contain a string which identifies the manufacturer's name for the physical entity, and should be set to a distinct value for each version or model of the physical entity. 
.1.3.6.1.4.1.11.2.14.9.1.1.1.1.3,HP-ENTITY-MIB::hpEntPhysicalVendorType,OBJECT,read-only,,obsolete,,An indication of the vendor-specific hardware type of the physical entity. Note that this is different from the definition of MIB-II's sysObjectID. An agent should set this object to a enterprise-specific registration identifier value indicating the specific equipment type in detail. The associated instance of hpEntPhysicalClass is used to indicate the general type of hardware device. If no vendor-specific registration identifier exists for this physical entity, or the value is unknown by this agent, then the value { 0 0 } is returned.
.1.3.6.1.4.1.11.2.14.9.1.1.1.1.4,HP-ENTITY-MIB::hpEntPhysicalContainedIn,INTEGER,read-only,,obsolete,,The value of hpEntPhysicalIndex for the physical entity which 'contains' this physical entity. A value of zero indicates this physical entity is not contained in any other physical entity. Note that the set of 'containment' relationships define a strict hierarchy; that is, recursion is not allowed.
.1.3.6.1.4.1.11.2.14.9.1.1.1.1.5,HP-ENTITY-MIB::hpEntPhysicalClass,INTEGER,read-only,,obsolete,other(1):unknown(2):chassis(3):backplane(4):container(5):powerSupply(6):fan(7):sensor(8):module(9):port(10),An indication of the general hardware type of the physical entity. An agent should set this object to the standard enumeration value which most accurately indicates the general class of the physical entity, or the primary class if there is more than one. If no appropriate standard registration identifier exists for this physical entity, then the value 'other(1)' is returned. If the value is unknown by this agent, then the value 'unknown(2)' is returned.
.1.3.6.1.4.1.11.2.14.9.1.1.1.1.6,HP-ENTITY-MIB::hpEntPhysicalParentRelPos,INTEGER,read-only,,obsolete,,An indication of the relative position of this 'child' component among all its 'sibling' components. Sibling components are defined as hpEntPhysicalEntries which share the same instance values of each of the hpEntPhysicalContainedIn and hpEntPhysicalClass objects. An NMS can use this object to identify the relative ordering for all sibling components of a particular parent (identified by the hpEntPhysicalContainedIn instance in each sibling entry). This value should match any external labeling of the physical component if possible. For example, for a module labeled as 'card #3', hpEntPhysicalParentRelPos should have the value '3'. If the physical position of this component does not match any external numbering or clearly visible ordering, then user documentation or other external reference material should be used to determine the parent-relative position. If this is not possible, then the the agent should assign a consistent (but possibly arbitrary) ordering to a given set of 'sibling' components, perhaps based on internal representation of the components. If the agent cannot determine the parent-relative position for some reason, or if the associated value of hpEntPhysicalContainedIn is '0', then the value '-1' is returned. Otherwise a non-negative integer is returned, indicating the parent-relative position of this physical entity. Parent-relative ordering normally starts from '1' and continues to 'N', where 'N' represents the highest positioned child entity. However, if the physical entities (e.g. slots) are labeled from a starting position of zero, then the first sibling should be associated with a hpEntPhysicalParentRelPos value of '0'. Note that this ordering may be sparse or dense, depending on agent implementation. The actual values returned are not globally meaningful, as each 'parent' component may use different numbering algorithms. The ordering is only meaningful among siblings of the same parent component. The agent should retain parent-relative position values across reboots, either through algorithmic assignment or use of non-volatile storage.
.1.3.6.1.4.1.11.2.14.9.1.1.1.1.7,HP-ENTITY-MIB::hpEntPhysicalName,OCTET,read-only,,obsolete,,The textual name of the physical entity. The value of this object should be the name of the component as assigned by the local device and should be suitable for use in commands entered at the device's `console'. This might be a text name, such as `console' or a simple component number (e.g. port or module number), such as `1', depending on the physical component naming syntax of the device. If there is no local name, or this object is otherwise not applicable, then this object contains a zero-length string. Note that the value of hpEntPhysicalName for two physical entities will be the same in the event that the console interface does not distinguish between them, e.g., slot-1 and the card in slot-1.
.1.3.6.1.4.1.11.2.14.9.1.2,HP-ENTITY-MIB::hpEntityLogical,,,,,,
.1.3.6.1.4.1.11.2.14.9.1.2.1,HP-ENTITY-MIB::hpEntLogicalTable,,not-accessible,,obsolete,,This table contains one row per logical entity. At least one entry must exist.
.1.3.6.1.4.1.11.2.14.9.1.2.1.1,HP-ENTITY-MIB::hpEntLogicalEntry,,not-accessible,hpEntLogicalIndex,obsolete,,Information about a particular logical entity. Entities may be managed by this agent or other SNMP agents (possibly) in the same chassis.
.1.3.6.1.4.1.11.2.14.9.1.2.1.1.1,HP-ENTITY-MIB::hpEntLogicalIndex,INTEGER,not-accessible,,obsolete,,The value of this object uniquely identifies the logical entity. The value is a small positive integer; index values for different logical entities are are not necessarily contiguous.
.1.3.6.1.4.1.11.2.14.9.1.2.1.1.2,HP-ENTITY-MIB::hpEntLogicalDescr,OCTET,read-only,,obsolete,,A textual description of the logical entity. This object should contain a string which identifies the manufacturer's name for the logical entity, and should be set to a distinct value for each version of the logical entity. 
.1.3.6.1.4.1.11.2.14.9.1.2.1.1.3,HP-ENTITY-MIB::hpEntLogicalType,OBJECT,read-only,,obsolete,,An indication of the type of logical entity. This will typically be the OBJECT IDENTIFIER name of the node in the SMI's naming hierarchy which represents the major MIB module, or the majority of the MIB modules, supported by the logical entity. For example: a logical entity of a regular host/router -> mib-2 a logical entity of a 802.1d bridge -> dot1dBridge a logical entity of a 802.3 repeater -> snmpDot3RptrMgmt If an appropriate node in the SMI's naming hierarchy cannot be identified, the value 'mib-2' should be used.
.1.3.6.1.4.1.11.2.14.9.1.2.1.1.4,HP-ENTITY-MIB::hpEntLogicalCommunity,OCTET,read-only,,obsolete,,An SNMPv1 or SNMPv2C community-string which can be used to access detailed management information for this logical entity. The agent should allow read access with this community string (to an appropriate subset of all managed objects) and may also choose to return a community string based on the privileges of the request used to read this object. Note that an agent may choose to return a community string with read-only privileges, even if this object is accessed with a read-write community string. However, the agent must take care not to return a community string which allows more privileges than the community string used to access this object. A compliant SNMP agent may wish to conserve naming scopes by representing multiple logical entities in a single 'main' naming scope. This is possible when the logical entities represented by the same value of hpEntLogicalCommunity have no object instances in common. For example, 'bridge1' and 'repeater1' may be part of the main naming scope, but at least one additional community string is needed to represent 'bridge2' and 'repeater2'. Logical entities 'bridge1' and 'repeater1' would be represented by sysOREntries associated with the 'main' naming scope. For agents not accessible via SNMPv1 or SNMPv2C, the value of this object is the empty-string.
.1.3.6.1.4.1.11.2.14.9.1.2.1.1.5,HP-ENTITY-MIB::hpEntLogicalTAddress,OCTET,read-only,,obsolete,,The transport service address by which the logical entity receives network management traffic, formatted according to the corresponding value of hpEntLogicalTDomain. For snmpUDPDomain, a TAddress is 6 octets long, the initial 4 octets containing the IP-address in network-byte order and the last 2 containing the UDP port in network-byte order. Consult 'Transport Mappings for Version 2 of the Simple Network Management Protocol' (RFC 1906 [8]) for further information on snmpUDPDomain.
.1.3.6.1.4.1.11.2.14.9.1.2.1.1.6,HP-ENTITY-MIB::hpEntLogicalTDomain,OBJECT,read-only,,obsolete,,Indicates the kind of transport service by which the logical entity receives network management traffic. Possible values for this object are presently found in the Transport Mappings for SNMPv2 document (RFC 1906 [8]).
.1.3.6.1.4.1.11.2.14.9.1.3,HP-ENTITY-MIB::hpEntityMapping,,,,,,
.1.3.6.1.4.1.11.2.14.9.1.3.1,HP-ENTITY-MIB::hpEntLPMappingTable,,not-accessible,,obsolete,,This table contains zero or more rows of logical entity to physical equipment associations. For each logical entity known by this agent, there are zero or more mappings to the physical resources which are used to realize that logical entity. An agent should limit the number and nature of entries in this table such that only meaningful and non-redundant information is returned. For example, in a system which contains a single power supply, mappings between logical entities and the power supply are not useful and should not be included. Also, only the most appropriate physical component which is closest to the root of a particular containment tree should be identified in an hpEntLPMapping entry. For example, suppose a bridge is realized on a particular module, and all ports on that module are ports on this bridge. A mapping between the bridge and the module would be useful, but additional mappings between the bridge and each of the ports on that module would be redundant (since the hpEntPhysicalContainedIn hierarchy can provide the same information). If, on the other hand, more than one bridge was utilizing ports on this module, then mappings between each bridge and the ports it used would be appropriate. Also, in the case of a single backplane repeater, a mapping for the backplane to the single repeater entity is not necessary.
.1.3.6.1.4.1.11.2.14.9.1.3.1.1,HP-ENTITY-MIB::hpEntLPMappingEntry,,not-accessible,hpEntLogicalIndex:hpEntLPPhysicalIndex,obsolete,,Information about a particular logical entity to physical equipment association. Note that the nature of the association is not specifically identified in this entry. It is expected that sufficient information exists in the MIBs used to manage a particular logical entity to infer how physical component information is utilized.
.1.3.6.1.4.1.11.2.14.9.1.3.1.1.1,HP-ENTITY-MIB::hpEntLPPhysicalIndex,INTEGER,read-only,,obsolete,,The value of this object identifies the index value of a particular hpEntPhysicalEntry associated with the indicated hpEntLogicalEntity.
.1.3.6.1.4.1.11.2.14.9.1.3.2,HP-ENTITY-MIB::hpEntAliasMappingTable,,not-accessible,,obsolete,,This table contains zero or more rows, representing mappings of logical entity and physical component to external MIB identifiers. Each physical port in the system may be associated with a mapping to an external identifier, which itself is associated with a particular logical entity's naming scope. A 'wildcard' mechanism is provided to indicate that an identifier is associated with more than one logical entity.
.1.3.6.1.4.1.11.2.14.9.1.3.2.1,HP-ENTITY-MIB::hpEntAliasMappingEntry,,not-accessible,hpEntPhysicalIndex:hpEntAliasLogicalIndexOrZero,obsolete,,Information about a particular physical equipment, logical entity to external identifier binding. Each logical entity/physical component pair may be associated with one alias mapping. The logical entity index may also be used as a 'wildcard' (refer to the hpEntAliasLogicalIndexOrZero objectclause for details.) Note that only hpEntPhysicalIndex values which represent physical ports (i.e. associated hpEntPhysicalClass value is 'port(10)') are permitted to exist in this table.
.1.3.6.1.4.1.11.2.14.9.1.3.2.1.1,HP-ENTITY-MIB::hpEntAliasLogicalIndexOrZero,INTEGER,not-accessible,,obsolete,,The value of this object uniquely identifies the logical entity which defines the naming scope for the associated instance of the 'hpEntAliasMappingIdentifier' object. If this object has a non-zero value, then it identifies the logical entity named by the same value of hpEntLogicalIndex. If this object has a value of zero, then the mapping between the physical component and the alias identifier for this hpEntAliasMapping entry is associated with all unspecified logical entities. That is, a value of zero (the default mapping) identifies any logical entity which does not have an explicit entry in this table for a particular hpEntPhysicalIndex/hpEntAliasMappingIdentifier pair. For example, to indicate that a particular interface (e.g. physical component 33) is identified by the same value of ifIndex for all logical entities, the following instance might exist: hpEntAliasMappingIdentifier.33.0 = ifIndex.5 In the event an hpEntPhysicalEntry is associated differently for some logical entities, additional hpEntAliasMapping entries may exist, e.g.: hpEntAliasMappingIdentifier.33.0 = ifIndex.6 hpEntAliasMappingIdentifier.33.4 = ifIndex.1 hpEntAliasMappingIdentifier.33.5 = ifIndex.1 hpEntAliasMappingIdentifier.33.10 = ifIndex.12 Note that entries with non-zero hpEntAliasLogicalIndexOrZero index values have precedence over any zero-indexed entry. In this example, all logical entities except 4, 5, and 10, associate physical entity 33 with ifIndex.6.
.1.3.6.1.4.1.11.2.14.9.1.3.2.1.2,HP-ENTITY-MIB::hpEntAliasMappingIdentifier,OBJECT,read-only,,obsolete,,The value of this object identifies a particular conceptual row associated with the indicated hpEntPhysicalIndex and hpEntLogicalIndex pair. Since only physical ports are modeled in this table, only entries which represent interfaces or ports are allowed. If an ifEntry exists on behalf of a particular physical port, then this object should identify the associated 'ifEntry'. For repeater ports, the appropriate row in the 'rptrPortGroupTable' should be identified instead. For example, suppose a physical port was represented by hpEntPhysicalEntry.3, hpEntLogicalEntry.15 existed for a repeater, and hpEntLogicalEntry.22 existed for a bridge. Then there might be two related instances of hpEntAliasMappingIdentifier: hpEntAliasMappingIdentifier.3.15 == rptrPortGroupIndex.5.2 hpEntAliasMappingIdentifier.3.22 == ifIndex.17 It is possible that other mappings (besides interfaces and repeater ports) may be defined in the future, as required. Bridge ports are identified by examining the Bridge MIB and appropriate ifEntries associated with each 'dot1dBasePort', and are thus not represented in this table.
.1.3.6.1.4.1.11.2.14.9.1.3.3,HP-ENTITY-MIB::hpEntPhysicalContainsTable,,not-accessible,,obsolete,,A table which exposes the container/containee relationships between physical entities. This table provides equivalent information found by constructing the virtual containment tree for a given hpEntPhysicalTable but in a more direct format.
.1.3.6.1.4.1.11.2.14.9.1.3.3.1,HP-ENTITY-MIB::hpEntPhysicalContainsEntry,,not-accessible,hpEntPhysicalIndex:hpEntPhysicalChildIndex,obsolete,,A single container/containee relationship.
.1.3.6.1.4.1.11.2.14.9.1.3.3.1.1,HP-ENTITY-MIB::hpEntPhysicalChildIndex,INTEGER,read-only,,obsolete,,The value of hpEntPhysicalIndex for the contained physical entity.
.1.3.6.1.4.1.11.2.14.9.1.4,HP-ENTITY-MIB::hpEntityGeneral,,,,,,
.1.3.6.1.4.1.11.2.14.9.1.4.1,HP-ENTITY-MIB::hpEntLastChangeTime,TimeTicks,read-only,,obsolete,,The value of sysUpTime at the time any of these events occur: * a conceptual row is created or deleted in any of these tables: - hpEntPhysicalTable - hpEntLogicalTable - hpEntLPMappingTable - hpEntAliasMappingTable - hpEntPhysicalContainsTable * any instance in the following list of objects changes value: - hpEntPhysicalDescr - hpEntPhysicalVendorType - hpEntPhysicalContainedIn - hpEntPhysicalClass - hpEntPhysicalParentRelPos - hpEntPhysicalName - hpEntLogicalDescr - hpEntLogicalType - hpEntLogicalCommunity - hpEntLogicalTAddress - hpEntLogicalTDomain - hpEntAliasMappingIdentifier 
.1.3.6.1.4.1.11.2.14.9.2,HP-ENTITY-MIB::hpEntityMIBTraps,,,,,,
.1.3.6.1.4.1.11.2.14.9.2.0,HP-ENTITY-MIB::hpEntityMIBTrapPrefix,,,,,,
.1.3.6.1.4.1.11.2.14.9.2.0.1,HP-ENTITY-MIB::hpEntConfigChange,,,,,,An hpEntConfigChange trap is sent when the value of hpEntLastChangeTime changes. It can be utilized by an NMS to trigger logical/physical entity table maintenance polls. An agent must not generate more than one hpEntConfigChange 'trap-event' in a five second period, where a 'trap-event' is the transmission of a single trap PDU to a list of trap destinations. If additional configuration changes occur within the five second 'throttling' period, then these trap-events should be suppressed by the agent. An NMS should periodically check the value of hpEntLastChangeTime to detect any missed hpEntConfigChange trap-events, e.g. due to throttling or transmission loss.
.1.3.6.1.4.1.11.2.14.9.3,HP-ENTITY-MIB::hpEntityConformance,,,,,,
.1.3.6.1.4.1.11.2.14.9.3.1,HP-ENTITY-MIB::hpEntityCompliances,,,,,,
.1.3.6.1.4.1.11.2.14.9.3.1.1,HP-ENTITY-MIB::hpEntityCompliance,,,,,,The compliance statement for SNMP entities which implement the Entity MIB.
.1.3.6.1.4.1.11.2.14.9.3.2,HP-ENTITY-MIB::hpEntityGroups,,,,,,
.1.3.6.1.4.1.11.2.14.9.3.2.1,HP-ENTITY-MIB::hpEntityPhysicalGroup,,,,,,The collection of objects which are used to represent physical system components, for which a single agent provides management information.
.1.3.6.1.4.1.11.2.14.9.3.2.2,HP-ENTITY-MIB::hpEntityLogicalGroup,,,,,,The collection of objects which are used to represent the list of logical entities for which a single agent provides management information.
.1.3.6.1.4.1.11.2.14.9.3.2.3,HP-ENTITY-MIB::hpEntityMappingGroup,,,,,,The collection of objects which are used to represent the associations between multiple logical entities, physical components, interfaces, and port identifiers for which a single agent provides management information.
.1.3.6.1.4.1.11.2.14.9.3.2.4,HP-ENTITY-MIB::hpEntityGeneralGroup,,,,,,The collection of objects which are used to represent general entity information for which a single agent provides management information.
.1.3.6.1.4.1.11.2.14.9.3.2.5,HP-ENTITY-MIB::hpEntityNotificationsGroup,,,,,,The collection of notifications used to indicate Entity MIB data consistency and general status information.
.1.3.6.1.4.1.11.2.14.10,HP-ICF-OID::hpicfAdmin,,,,,,
.1.3.6.1.4.1.11.2.14.10.1,HP-ICF-OID::hpicfDomains,,,,,,
.1.3.6.1.4.1.11.2.14.10.1.1,HP-ICF-OID::hpicfLLCDomain,,,,,,The SNMP over 802.2 transport domain.
.1.3.6.1.4.1.11.2.14.10.2,HP-ICF-OID::hpicfObjectModules,,,,,,
.1.3.6.1.4.1.11.2.14.10.2.1,HP-ICF-OID::icfSecurityMib,,,,,,
.1.3.6.1.4.1.11.2.14.10.2.1.1,HP-ICF-SECURITY::icfSecurityConformance,,,,,,
.1.3.6.1.4.1.11.2.14.10.2.1.1.1,HP-ICF-SECURITY::icfSecurityCompliances,,,,,,
.1.3.6.1.4.1.11.2.14.10.2.1.1.1.1,HP-ICF-SECURITY::icfSecurCompliance,,,,,,********* THIS COMPLIANCE IS DEPRECATED *********/ A compliance statement for agents implementing the original version of this module.
.1.3.6.1.4.1.11.2.14.10.2.1.1.1.2,HP-ICF-SECURITY::icfV1CommunityCompliance,,,,,,********* THIS GROUP IS DEPRECATED ********* A compliance statement for HP ICF agents implementing SNMPv1 community name management.
.1.3.6.1.4.1.11.2.14.10.2.1.1.1.3,HP-ICF-SECURITY::icfAuthIPMgrCompliance,,,,,,A compliance statement for granting or denying access to specific IP addresses for HTTP, telnet, and TFTP.
.1.3.6.1.4.1.11.2.14.10.2.1.1.1.4,HP-ICF-SECURITY::icfAuthIPMgrCompliance1,,,,,,A compliance statement for granting or denying access to specific IP addresses for HTTP, telnet, and TFTP.
.1.3.6.1.4.1.11.2.14.10.2.1.1.2,HP-ICF-SECURITY::icfSecurityGroups,,,,,,
.1.3.6.1.4.1.11.2.14.10.2.1.1.2.1,HP-ICF-SECURITY::icfSnmpSecurityGroup,,,,,,********* THIS GROUP IS DEPRECATED ********* A collection of objects for managing the SNMPv1 (non-)security configuration on HP networking devices.
.1.3.6.1.4.1.11.2.14.10.2.1.1.2.2,HP-ICF-SECURITY::icfSecIntruderGroup,,,,,,A collection of objects for tracking authentication failures.
.1.3.6.1.4.1.11.2.14.10.2.1.1.2.13,HP-ICF-SECURITY::icfV1CommunityGroup,,,,,,********* THIS GROUP IS DEPRECATED ********* A collection of objects for managing SNMPv1 community strings.
.1.3.6.1.4.1.11.2.14.10.2.1.1.2.14,HP-ICF-SECURITY::icfAuthIPMgrGroup,,,,,,***************** deprecated ****************** A collection of objects for granting or denying access to specific IP addresses for HTTP, telnet, and TFTP. This Group object has been deprecated and a new  group object has been defined with name  icfAuthIPMgrInetGroup.
.1.3.6.1.4.1.11.2.14.10.2.1.1.2.15,HP-ICF-SECURITY::icfAuthIPMgrInetGroup,,,,,,A collection of objects for granting or denying access to specific IP addresses for HTTP, telnet, and TFTP.
.1.3.6.1.4.1.11.2.14.10.2.2,HP-ICF-OID::hpicfChainMib,,,,,,
.1.3.6.1.4.1.11.2.14.10.2.2.1,HP-ICF-CHAIN::hpicfChainConformance,,,,,,
.1.3.6.1.4.1.11.2.14.10.2.2.1.1,HP-ICF-CHAIN::hpicfChainCompliances,,,,,,
.1.3.6.1.4.1.11.2.14.10.2.2.1.1.1,HP-ICF-CHAIN::hpicfChainingCompliance,,,,,,The compliance statement for HP ICF devices with a Distributed Management Chain connection.
.1.3.6.1.4.1.11.2.14.10.2.2.1.1.2,HP-ICF-CHAIN::hpicfChainingCompliance2,,,,,,The compliance statement for HP ICF devices with a Distributed Management Chain connection.
.1.3.6.1.4.1.11.2.14.10.2.2.1.2,HP-ICF-CHAIN::hpicfChainGroups,,,,,,
.1.3.6.1.4.1.11.2.14.10.2.2.1.2.1,HP-ICF-CHAIN::hpicfChainingGroup,,,,,,A collection of objects for managing devices on the HP Distributed Management Bus.
.1.3.6.1.4.1.11.2.14.10.2.2.1.2.2,HP-ICF-CHAIN::hpicfChainTrapGroup,,,,,,********* THIS GROUP IS OBSOLETE ********* A collection of notifications used to indicate a changes in membership on a Distributed Management Chain.
.1.3.6.1.4.1.11.2.14.10.2.2.1.2.3,HP-ICF-CHAIN::hpicfChainNotifyGroup,,,,,,A collection of notifications used to indicate a changes in membership on a Distributed Management Chain.
.1.3.6.1.4.1.11.2.14.10.2.3,HP-ICF-OID::hpicfChassisMib,,,,,,
.1.3.6.1.4.1.11.2.14.10.2.3.1,HP-ICF-CHASSIS::hpicfChassisConformance,,,,,,
.1.3.6.1.4.1.11.2.14.10.2.3.1.1,HP-ICF-CHASSIS::hpicfChassisCompliances,,,,,,
.1.3.6.1.4.1.11.2.14.10.2.3.1.1.1,HP-ICF-CHASSIS::hpicfChasAdvStkCompliance,,,,,,********* THIS COMPLIANCE IS DEPRECATED ********* A compliance statement for AdvanceStack chassis devices.
.1.3.6.1.4.1.11.2.14.10.2.3.1.1.2,HP-ICF-CHASSIS::hpicfChasAdvStk2Compliance,,,,,,********* THIS COMPLIANCE IS DEPRECATED ********* An updated compliance statement for AdvanceStack chassis devices that includes the hpicfChassisAddrGroup.
.1.3.6.1.4.1.11.2.14.10.2.3.1.1.3,HP-ICF-CHASSIS::hpicfChasSensorCompliance,,,,,,A compliance statement for non-chassis devices, or chassis devices implementing a standards-based MIB for obtaining chassis information, which contain redundant power supplies or other appropriate sensors.
.1.3.6.1.4.1.11.2.14.10.2.3.1.1.4,HP-ICF-CHASSIS::hpicfChasTempCompliance,,,,,, A compliance statement for chassis's system air temperature details.
.1.3.6.1.4.1.11.2.14.10.2.3.1.1.5,HP-ICF-CHASSIS::hpicfOpacityShieldsCompliance,,,,,,A compliance statement for chassis's opacity Shield
.1.3.6.1.4.1.11.2.14.10.2.3.1.2,HP-ICF-CHASSIS::hpicfChassisGroups,,,,,,
.1.3.6.1.4.1.11.2.14.10.2.3.1.2.1,HP-ICF-CHASSIS::hpicfChassisBasicGroup,,,,,,********* THIS GROUP IS DEPRECATED ********* A collection of objects for determining the contents of an ICF chassis device.
.1.3.6.1.4.1.11.2.14.10.2.3.1.2.2,HP-ICF-CHASSIS::hpicfSensorGroup,,,,,,A collection of objects for monitoring the status of sensors in an ICF chassis.
.1.3.6.1.4.1.11.2.14.10.2.3.1.2.3,HP-ICF-CHASSIS::hpicfChassisAddrGroup,,,,,,********* THIS GROUP IS DEPRECATED ********* A collection of objects to allow a management station to determine which devices are in the same chassis.
.1.3.6.1.4.1.11.2.14.10.2.3.1.2.4,HP-ICF-CHASSIS::hpicfSensorNotifyGroup,,,,,,A collection of notifications used to indicate changes in the status of sensors.
.1.3.6.1.4.1.11.2.14.10.2.3.1.2.5,HP-ICF-CHASSIS::hpicfChasTempGroup,,,,,,A collection objects to give temperature details  of chassis
.1.3.6.1.4.1.11.2.14.10.2.3.1.2.6,HP-ICF-CHASSIS::hpicfOpacityShieldsGroup,,,,,,A collection of objects for Opacity Shields  of chassis
.1.3.6.1.4.1.11.2.14.10.2.4,HP-ICF-OID::hpicfDownloadMib,,,,,,
.1.3.6.1.4.1.11.2.14.10.2.4.1,HP-ICF-DOWNLOAD::hpicfDownloadConformance,,,,,,
.1.3.6.1.4.1.11.2.14.10.2.4.1.1,HP-ICF-DOWNLOAD::hpicfDownloadCompliances,,,,,,
.1.3.6.1.4.1.11.2.14.10.2.4.1.1.1,HP-ICF-DOWNLOAD::hpicfDownloadCompliance,,,,,,********* THIS COMPLIANCE IS DEPRECATED ********* The compliance statement for HP ICF network downloadable devices.
.1.3.6.1.4.1.11.2.14.10.2.4.1.1.2,HP-ICF-DOWNLOAD::hpicfDownloadConfigCompliance,,,,,,New version of the compliance statement for HP ICF network downloadable devices that allows for monitoring in-progress downloads and for directing a download to different destinations on the device.
.1.3.6.1.4.1.11.2.14.10.2.4.1.1.3,HP-ICF-DOWNLOAD::hpicfDownloadConfigInetCompliance,,,,,,New version of the compliance statement for HP ICF network downloadable devices that allows for monitoring in-progress downloads and for directing a download to different destinations on the device.
.1.3.6.1.4.1.11.2.14.10.2.4.1.1.4,HP-ICF-DOWNLOAD::hpicfDownloadAutoTftpCompliance,,,,,,The compliance statement for HP ICF network  downloadable devices that allows automatic download of a firmware-image on boot.
.1.3.6.1.4.1.11.2.14.10.2.4.1.1.5,HP-ICF-DOWNLOAD::hpicfDownloadConfigInetCompliance1,,,,,,New version of the compliance statement for HP ICF network downloadable devices that allows for monitoring in-progress downloads and for directing a download to different destinations on the device.
.1.3.6.1.4.1.11.2.14.10.2.4.1.1.6,HP-ICF-DOWNLOAD::hpicfDownloadConfigInetCompliance2,,,,,,New version of the compliance statement for HP ICF network downloadable devices that allows for monitoring in-progress downloads and for directing a download to different destinations on the device.
.1.3.6.1.4.1.11.2.14.10.2.4.1.1.7,HP-ICF-DOWNLOAD::hpicfDownloadConfigInetCompliance3,,,,,,A New version of the compliance statement for HP ICF network downloadable devices that allows monitoring of downloads in progress and directing a download to different destinations on the device.
.1.3.6.1.4.1.11.2.14.10.2.4.1.1.8,HP-ICF-DOWNLOAD::hpicfDownloadConfigInetCompliance4,,,,,,A New version of the compliance statement for HP ICF network downloadable devices that allows monitoring of downloads in progress and directing a download to different destinations on the device.
.1.3.6.1.4.1.11.2.14.10.2.4.1.2,HP-ICF-DOWNLOAD::hpicfDownloadGroups,,,,,,
.1.3.6.1.4.1.11.2.14.10.2.4.1.2.1,HP-ICF-DOWNLOAD::hpicfDownloadGroup,,,,,,********* THIS GROUP IS DEPRECATED ********* A collection of objects for controlling network download of device firmware to ICF devices.
.1.3.6.1.4.1.11.2.14.10.2.4.1.2.2,HP-ICF-DOWNLOAD::hpicfDownloadLogGroup,,,,,,A collection of objects for maintaining a log of network download attempts to ICF devices.
.1.3.6.1.4.1.11.2.14.10.2.4.1.2.3,HP-ICF-DOWNLOAD::hpicfDownloadConfigGroup,,,,,,A collection of objects for controlling and monitoring network download of device firmware to ICF devices.
.1.3.6.1.4.1.11.2.14.10.2.4.1.2.4,HP-ICF-DOWNLOAD::hpicfDownloadConfigInetGroup,,,,,,A collection of objects for controlling and monitoring network download of device firmware to ICF devices.
.1.3.6.1.4.1.11.2.14.10.2.4.1.2.5,HP-ICF-DOWNLOAD::hpicfDownloadAutoTftpGroup,,,,,,A collection of objects for controlling automatic download of a firmware image to the device.
.1.3.6.1.4.1.11.2.14.10.2.4.1.2.6,HP-ICF-DOWNLOAD::hpicfDownloadConfigOtherGroup,,,,,,A collection of objects for controlling automatic download of a firmware image to the device.
.1.3.6.1.4.1.11.2.14.10.2.4.1.2.7,HP-ICF-DOWNLOAD::hpicfDownloadConfigOtherGroup1,,,,,,A collection of objects for controlling automatic download of a firmware image to the device.
.1.3.6.1.4.1.11.2.14.10.2.4.1.2.8,HP-ICF-DOWNLOAD::hpicfDownloadConfigOtherGroup2,,,,,,A collection of objects for controlling the automatic download of a firmware on the device.
.1.3.6.1.4.1.11.2.14.10.2.4.1.2.9,HP-ICF-DOWNLOAD::hpicfDownloadConfigOtherGroup3,,,,,,A collection of objects for controlling the automatic download of a firmware on the device.
.1.3.6.1.4.1.11.2.14.10.2.5,HP-ICF-OID::hpicfBasicMib,,,,,,
.1.3.6.1.4.1.11.2.14.10.2.5.1,HP-ICF-BASIC::hpicfBasicConformance,,,,,,
.1.3.6.1.4.1.11.2.14.10.2.5.1.1,HP-ICF-BASIC::hpicfBasicCompliances,,,,,,
.1.3.6.1.4.1.11.2.14.10.2.5.1.1.1,HP-ICF-BASIC::hpicfBasicCompliance,,,,,,********* THIS COMPLIANCE IS DEPRECATED ********* A compliance statement basic management and configuration of HP ICF hubs.
.1.3.6.1.4.1.11.2.14.10.2.5.1.1.2,HP-ICF-BASIC::hpicfNewBasicCompliance,,,,,,********* THIS COMPLIANCE IS DEPRECATED ********* A new compliance statement for this module.
.1.3.6.1.4.1.11.2.14.10.2.5.1.1.3,HP-ICF-BASIC::hpicfBasicCompliance3,,,,,,********* THIS COMPLIANCE IS DEPRECATED *********
.1.3.6.1.4.1.11.2.14.10.2.5.1.1.4,HP-ICF-BASIC::hpicfBasicCompliance4,,,,,,********* THIS COMPLIANCE IS DEPRECATED *********
.1.3.6.1.4.1.11.2.14.10.2.5.1.1.5,HP-ICF-BASIC::hpicfBasicCompliance5,,,,,,********* THIS COMPLIANCE IS DEPRECATED *********
.1.3.6.1.4.1.11.2.14.10.2.5.1.1.6,HP-ICF-BASIC::hpicfBasicCompliance6,,,,,,********* THIS COMPLIANCE IS DEPRECATED *********
.1.3.6.1.4.1.11.2.14.10.2.5.1.1.7,HP-ICF-BASIC::hpicfBasicCompliance7,,,,,,An updated compliance statement for this module.
.1.3.6.1.4.1.11.2.14.10.2.5.1.1.8,HP-ICF-BASIC::hpicfBasicSNMPConfigCompliance,,,,,,The compliance statement for SNMP entities  which implements enabling/disabling of  SNMP v1/v2/v3 and for enabling/disabling  SNMP support for hpSwitchAuthenticationMIB.
.1.3.6.1.4.1.11.2.14.10.2.5.1.1.9,HP-ICF-BASIC::hpicfBasicConfigCompliance,,,,,,The compliance statement for config entities  which implements basic configuration of the switch.
.1.3.6.1.4.1.11.2.14.10.2.5.1.1.10,HP-ICF-BASIC::hpicfBasicComplianceOobm,,,,,,The compliance statement for devices implementing the HP DNS Server Mib with OOBM support
.1.3.6.1.4.1.11.2.14.10.2.5.1.1.11,HP-ICF-BASIC::hpicfBasicCompliance8,,,,,,The compliance statement for SNMP entities  SNMP support for hpSwitchAuthenticationMIB.
.1.3.6.1.4.1.11.2.14.10.2.5.1.1.12,HP-ICF-BASIC::hpicfBasicCompliance9,,,,,,The compliance statement for SNMP entities which implements DNS domain configurations.
.1.3.6.1.4.1.11.2.14.10.2.5.1.2,HP-ICF-BASIC::hpicfBasicGroups,,,,,,
.1.3.6.1.4.1.11.2.14.10.2.5.1.2.1,HP-ICF-BASIC::hpicfBasicGroup,,,,,,********* THIS GROUP IS DEPRECATED ********* A collection of objects for basic reset/selftest control on ICF devices.
.1.3.6.1.4.1.11.2.14.10.2.5.1.2.2,HP-ICF-BASIC::hpicfTelnetGroup,,,,,,********* THIS GROUP IS DEPRECATED ********* A collection of objects for managing the telnet server on ICF devices.
.1.3.6.1.4.1.11.2.14.10.2.5.1.2.3,HP-ICF-BASIC::hpicfNewBasicGroup,,,,,,********* THIS GROUP IS DEPRECATED ********* A collection of objects for basic management of ICF devices.
.1.3.6.1.4.1.11.2.14.10.2.5.1.2.4,HP-ICF-BASIC::hpicfDiscoverGroup,,,,,,********* THIS GROUP IS DEPRECATED ********* A collection of objects to assist in discovering and mapping ICF devices.
.1.3.6.1.4.1.11.2.14.10.2.5.1.2.5,HP-ICF-BASIC::hpicfBasicIpConfigGroup,,,,,,********* THIS GROUP IS DEPRECATED ********* A collection of objects for configuring the IP protocol stack in ICF agents.
.1.3.6.1.4.1.11.2.14.10.2.5.1.2.6,HP-ICF-BASIC::hpicfBasicIpxConfigGroup,,,,,,A collection of objects for configuring the IPX protocol stack in ICF agents.
.1.3.6.1.4.1.11.2.14.10.2.5.1.2.7,HP-ICF-BASIC::hpicfBasicFixedTrapGroup,,,,,,A collection of objects for managing fixed (i.e. non-threshold) traps on ICF devices. Implementation of this group requires implementation of the RMON event group.
.1.3.6.1.4.1.11.2.14.10.2.5.1.2.8,HP-ICF-BASIC::hpicfBasicTrapDestGroup,,,,,,*************THIS OBJECT IS DEPRECATED ********** A collection of objects for configuring trap destinations on ICF devices. Implementation of this group requires implementation of the RMON event group.
.1.3.6.1.4.1.11.2.14.10.2.5.1.2.9,HP-ICF-BASIC::hpicfBasicRmonNVGroup,,,,,,A collection of objects for controlling which RMON alarm and event table entries are saved in non-volatile storage.
.1.3.6.1.4.1.11.2.14.10.2.5.1.2.10,HP-ICF-BASIC::hpicfBasicSelfTestNotifyGroup,,,,,,A collection of notifications used to indicate changes in selfTest status
.1.3.6.1.4.1.11.2.14.10.2.5.1.2.11,HP-ICF-BASIC::hpicfBasicWebAgentGroup,,,,,,A collection of objects for managing the EHTTPD server in ICF devices.
.1.3.6.1.4.1.11.2.14.10.2.5.1.2.12,HP-ICF-BASIC::hpicfAnnounceDiscoveryGroup,,,,,,A collection of objects to assist in discovering and mapping ICF devices.
.1.3.6.1.4.1.11.2.14.10.2.5.1.2.13,HP-ICF-BASIC::hpicfBasicIpConfigGroup2,,,,,,A collection of objects for configuring the IP protocol stack in agents that support only a single global default router.
.1.3.6.1.4.1.11.2.14.10.2.5.1.2.14,HP-ICF-BASIC::hpicfBasicProxyArpGroup,,,,,,A group of objects for configuring proxy ARP on devices that support IP forwarding.
.1.3.6.1.4.1.11.2.14.10.2.5.1.2.15,HP-ICF-BASIC::hpicfBasicIpSecondaryGroup,,,,,,A group of objects for configuring secondary IP addresses on devices that support more than one IP address on an interface.
.1.3.6.1.4.1.11.2.14.10.2.5.1.2.16,HP-ICF-BASIC::hpicfSnmpTargetAddrLogFilterGroup,,,,,,A group of objects to add an HpicfSnmpTargetAddrLogFilterEntry to snmpTargetAddrTable.
.1.3.6.1.4.1.11.2.14.10.2.5.1.2.17,HP-ICF-BASIC::hpicfBasicIpConfigGroup3,,,,,,A collection of objects for configuring the IP protocol stack in agents that support only a single global default router.
.1.3.6.1.4.1.11.2.14.10.2.5.1.2.18,HP-ICF-BASIC::hpicfBasicBannerGroup,,,,,,A group of objects for configuring banners for display on console and web-ui at login
.1.3.6.1.4.1.11.2.14.10.2.5.1.2.19,HP-ICF-BASIC::hpicfBasicDNSConfigGroup,,,,,,A collection of objects for configuring the DNS resolver facility in agents that are capable of resolving host names to IP addresses.
.1.3.6.1.4.1.11.2.14.10.2.5.1.2.20,HP-ICF-BASIC::hpicfBasicGroup1,,,,,,A collection of objects for basic management of ICF devices.
.1.3.6.1.4.1.11.2.14.10.2.5.1.2.21,HP-ICF-BASIC::hpicfSNMPConfigGroup,,,,,,A collection of objects for enabling/disabling of SNMP v1/v2/v3 and for enabling/disabling  SNMP support for hpSwitchAuthenticationMIB.
.1.3.6.1.4.1.11.2.14.10.2.5.1.2.22,HP-ICF-BASIC::hpicfBasicConfigGroup,,,,,,A collection of objects for basic configuration of the switch.
.1.3.6.1.4.1.11.2.14.10.2.5.1.2.23,HP-ICF-BASIC::hpicfInetDNSNameServerOobmGroup,,,,,,A collection of objects for configuring the DNS server entry with support for OOBM (Out of Band Management) interface.
.1.3.6.1.4.1.11.2.14.10.2.5.1.2.24,HP-ICF-BASIC::hpicfBasicObjectsGroup,,,,,,A collection of deprecated objects
.1.3.6.1.4.1.11.2.14.10.2.5.1.2.25,HP-ICF-BASIC::hpicfBasicDNSGroup1,,,,,,A collection of objects for DNS configuration parameters.
.1.3.6.1.4.1.11.2.14.10.2.6,HP-ICF-OID::hpicfStackMib,,,,,,
.1.3.6.1.4.1.11.2.14.10.2.6.1,HP-ICF-STACK::hpicfStackConformance,,,,,,
.1.3.6.1.4.1.11.2.14.10.2.6.1.1,HP-ICF-STACK::hpicfStackCompliances,,,,,,
.1.3.6.1.4.1.11.2.14.10.2.6.1.1.1,HP-ICF-STACK::hpicfStackCompliance,,,,,,The compliance statement for agents managing a stack of HP boxes.
.1.3.6.1.4.1.11.2.14.10.2.6.1.2,HP-ICF-STACK::hpicfStackGroups,,,,,,
.1.3.6.1.4.1.11.2.14.10.2.6.1.2.1,HP-ICF-STACK::hpicfStackBasicGroup,,,,,,A collection of objects for managing boxes in a stack.
.1.3.6.1.4.1.11.2.14.10.2.6.1.2.2,HP-ICF-STACK::hpicfStackMultiAgentGroup,,,,,,A collection of objects for managing redundant agents in a stack of HP boxes.
.1.3.6.1.4.1.11.2.14.10.2.7,HP-ICF-OID::hpicfLinkTestMib,,,,,,
.1.3.6.1.4.1.11.2.14.10.2.7.1,HP-ICF-LINKTEST::hpicfLinkTestConformance,,,,,,
.1.3.6.1.4.1.11.2.14.10.2.7.1.1,HP-ICF-LINKTEST::hpicfLinkTestCompliances,,,,,,
.1.3.6.1.4.1.11.2.14.10.2.7.1.1.1,HP-ICF-LINKTEST::hpicfLinkTestCompliance,,,,,,The compliance statement for ICF devices that provide a connectivity test facility.
.1.3.6.1.4.1.11.2.14.10.2.7.1.1.2,HP-ICF-LINKTEST::hpicfLinkTestCompliance2,,,,,,The compliance statement for ICF devices that provide a connectivity test facility.
.1.3.6.1.4.1.11.2.14.10.2.7.1.2,HP-ICF-LINKTEST::hpicfLinkTestGroups,,,,,,
.1.3.6.1.4.1.11.2.14.10.2.7.1.2.1,HP-ICF-LINKTEST::hpicfLinkTestGroup,,,,,,A collection of objects for initiating and monitoring network connectivity tests on ICF devices.
.1.3.6.1.4.1.11.2.14.10.2.7.1.2.2,HP-ICF-LINKTEST::hpicfLinkTestGroup2,,,,,,A collection of objects for initiating and monitoring network connectivity tests on ICF devices.
.1.3.6.1.4.1.11.2.14.10.2.8,HP-ICF-OID::hpicfGenRptrMib,,,,,,
.1.3.6.1.4.1.11.2.14.10.2.8.1,HP-ICF-GENERIC-RPTR::hpicfGenRptrConformance,,,,,,
.1.3.6.1.4.1.11.2.14.10.2.8.1.1,HP-ICF-GENERIC-RPTR::hpicfGenRptrCompliances,,,,,,
.1.3.6.1.4.1.11.2.14.10.2.8.1.1.1,HP-ICF-GENERIC-RPTR::hpicfHubSecurityCompliance,,,,,,********* THIS COMPLIANCE IS DEPRECATED ********* The compliance statement for agents implementing per-port security in a single-repeater 802.3 repeater system.
.1.3.6.1.4.1.11.2.14.10.2.8.1.1.2,HP-ICF-GENERIC-RPTR::hpicfGenRptrBasicCompliance,,,,,,********* THIS COMPLIANCE IS DEPRECATED ********* The compliance statement for agents implementing management for a single repeater.
.1.3.6.1.4.1.11.2.14.10.2.8.1.1.3,HP-ICF-GENERIC-RPTR::hpicfGenRptrSecurityCompliance,,,,,,********* THIS COMPLIANCE IS DEPRECATED ********* The compliance statement for AdvanceStack 100VG slaves implementing security.
.1.3.6.1.4.1.11.2.14.10.2.8.1.1.4,HP-ICF-GENERIC-RPTR::hpicfGenRptrCompliance,,,,,,********* THIS COMPLIANCE IS DEPRECATED ********* The compliance statement for HP managed repeater systems.
.1.3.6.1.4.1.11.2.14.10.2.8.1.1.5,HP-ICF-GENERIC-RPTR::hpicfGenRptrCompliance2,,,,,,The compliance statement for HP managed repeater systems.
.1.3.6.1.4.1.11.2.14.10.2.8.1.1.6,HP-ICF-GENERIC-RPTR::hpicfGenRptrCompliance3,,,,,,The compliance statement for HP managed repeater systems.
.1.3.6.1.4.1.11.2.14.10.2.8.1.1.7,HP-ICF-GENERIC-RPTR::hpicfGenRptrMultiSecOnlyCompliance,,,,,,********* THIS COMPLIANCE IS DEPRECATED ********* The compliance statement for non-repeater devices that implement per-port security with multiple authorized address per port.
.1.3.6.1.4.1.11.2.14.10.2.8.1.1.8,HP-ICF-GENERIC-RPTR::hpicfGenRptrMultiSecOnlyCompliance2,,,,,,********* THIS COMPLIANCE IS DEPRECATED ********* The updated compliance statement for non-repeater devices that implement per-port security with multiple authorized address per port.
.1.3.6.1.4.1.11.2.14.10.2.8.1.1.9,HP-ICF-GENERIC-RPTR::hpicfGenRptrMultiSecOnlyCompliance3,,,,,,The updated compliance statement for non-repeater devices that implement per-port security with multiple authorized address per port.
.1.3.6.1.4.1.11.2.14.10.2.8.1.2,HP-ICF-GENERIC-RPTR::hpicfGenRptrGroups,,,,,,
.1.3.6.1.4.1.11.2.14.10.2.8.1.2.1,HP-ICF-GENERIC-RPTR::hpicfHubSecurityGroup,,,,,,********* THIS GROUP IS DEPRECATED ********* A collection of objects for managing per-port security violations for a managed 802.3 repeater system.
.1.3.6.1.4.1.11.2.14.10.2.8.1.2.2,HP-ICF-GENERIC-RPTR::hpicfGenRptrBasicGroup,,,,,,A collection of objects for basic configuration of a system containing repeaters.
.1.3.6.1.4.1.11.2.14.10.2.8.1.2.3,HP-ICF-GENERIC-RPTR::hpicfGenRptrSecPtGroup,,,,,,A collection of objects for managing per-port security in a managed repeater system.
.1.3.6.1.4.1.11.2.14.10.2.8.1.2.4,HP-ICF-GENERIC-RPTR::hpicfGenRptrInfoGroup,,,,,,A collection of objects providing information about logical repeaters in a system.
.1.3.6.1.4.1.11.2.14.10.2.8.1.2.5,HP-ICF-GENERIC-RPTR::hpicfGenRptrBkpLinkGroup,,,,,,A collection of objects for configuring backup links in a managed repeater system.
.1.3.6.1.4.1.11.2.14.10.2.8.1.2.6,HP-ICF-GENERIC-RPTR::hpicfGenRptrPortMappingGroup,,,,,,A collection of objects for mapping repeater segments and repeater ports to logical repeaters.
.1.3.6.1.4.1.11.2.14.10.2.8.1.2.7,HP-ICF-GENERIC-RPTR::hpicfGenRptrLoadBalanceGroup,,,,,,A collection of objects for managing segment load balancing on multisegment repeaters with internal switches.
.1.3.6.1.4.1.11.2.14.10.2.8.1.2.8,HP-ICF-GENERIC-RPTR::hpicfGenRptrSwitchConfigGroup,,,,,,A collection of Objects for configuring internal and external switches for switching between repeater segments in a repeater system.
.1.3.6.1.4.1.11.2.14.10.2.8.1.2.9,HP-ICF-GENERIC-RPTR::hpicfGenRptrSecNotifyGroup,,,,,,A collection of notifications used to indicate per-port security violations.
.1.3.6.1.4.1.11.2.14.10.2.8.1.2.10,HP-ICF-GENERIC-RPTR::hpicfGenRptrBkpLinkNotifyGroup,,,,,,A collection of notifications used to indicate state changes on a backup link.
.1.3.6.1.4.1.11.2.14.10.2.8.1.2.11,HP-ICF-GENERIC-RPTR::hpicfSecPtGroup,,,,,,********* THIS GROUP IS DEPRECATED ********* A collection of objects for managing per-port security in a managed repeater or switch system.
.1.3.6.1.4.1.11.2.14.10.2.8.1.2.12,HP-ICF-GENERIC-RPTR::hpicfGenRptrBridgeGroup,,,,,,A collection of objects for basic configuration of repeater system containing internal bridging.
.1.3.6.1.4.1.11.2.14.10.2.8.1.2.13,HP-ICF-GENERIC-RPTR::hpicfSecPtGroup2,,,,,,********* THIS GROUP IS DEPRECATED ********* A collection of objects for managing per-port security in a managed repeater or switch system.
.1.3.6.1.4.1.11.2.14.10.2.8.1.2.14,HP-ICF-GENERIC-RPTR::hpicfSecPtGroup3,,,,,,A collection of objects for managing per-port security in a managed repeater or switch system.
.1.3.6.1.4.1.11.2.14.10.2.9,HP-ICF-OID::hpicf8023RptrMib,,,,,,
.1.3.6.1.4.1.11.2.14.10.2.9.1,HP-ICF-8023-RPTR::hpicf8023RptrConformance,,,,,,
.1.3.6.1.4.1.11.2.14.10.2.9.1.1,HP-ICF-8023-RPTR::hpicf8023RptrCompliances,,,,,,
.1.3.6.1.4.1.11.2.14.10.2.9.1.1.1,HP-ICF-8023-RPTR::hpicf8023RptrCompliance,,,,,,********* THIS COMPLIANCE IS DEPRECATED ********* The compliance statement for HP extensions to the 802.3 Repeater MIB for HP AdvanceStack 802.3 repeaters.
.1.3.6.1.4.1.11.2.14.10.2.9.1.1.2,HP-ICF-8023-RPTR::hpicf8023RptrSlaveCompliance,,,,,,********* THIS COMPLIANCE IS DEPRECATED ********* The compliance statement for HP extensions to the 802.3 Repeater MIB for HP AdvanceStack 802.3 slave repeaters.
.1.3.6.1.4.1.11.2.14.10.2.9.1.1.3,HP-ICF-8023-RPTR::hpicf8023MultiRptrCompliance,,,,,,The compliance statement for HP extensions to the 802.3 Repeater MIB for HP AdvanceStack 802.3 repeaters. This compliance supports devices with multiple repeater segments, as well as devices with a single repeater segment.
.1.3.6.1.4.1.11.2.14.10.2.9.1.1.4,HP-ICF-8023-RPTR::hpicf8023RptrAutoNegCompliance,,,,,,The compliance statement for HP extensions to the 802.3 Repeater MIB for HP AdvanceStack 802.3 repeaters. This compliance supports devices with multiple repeater segments, as well as devices with a single repeater segment. It also supports repeater devices with auto-negotiation.
.1.3.6.1.4.1.11.2.14.10.2.9.1.2,HP-ICF-8023-RPTR::hpicf8023RptrGroups,,,,,,
.1.3.6.1.4.1.11.2.14.10.2.9.1.2.1,HP-ICF-8023-RPTR::hpicf8023RptrBasicGroup,,,,,,********* THIS GROUP IS DEPRECATED ********* A collection of HP specific extensions to the 802.3 Repeater MIB for the HP AdvanceStack product line.
.1.3.6.1.4.1.11.2.14.10.2.9.1.2.2,HP-ICF-8023-RPTR::hpicf8023RptrBasicSlaveGroup,,,,,,********* THIS GROUP IS DEPRECATED ********* A collection of HP specific extensions to the 802.3 Repeater MIB for HP AdvanceStack slaves.
.1.3.6.1.4.1.11.2.14.10.2.9.1.2.3,HP-ICF-8023-RPTR::hpicf8023RptrMonitorGroup,,,,,,********* THIS GROUP IS DEPRECATED ********* A collection of extended counters for 802.3 repeaters in the HP AdvanceStack product line.
.1.3.6.1.4.1.11.2.14.10.2.9.1.2.4,HP-ICF-8023-RPTR::hpicf8023RptrMonitorSlaveGroup,,,,,,********* THIS GROUP IS DEPRECATED ********* A collection of extended counters for HP AdvanceStack 802.3 slave repeaters.
.1.3.6.1.4.1.11.2.14.10.2.9.1.2.5,HP-ICF-8023-RPTR::hpicf8023MultiRptrBasicGroup,,,,,,A collection of HP specific extensions to the 802.3 Repeater MIB for products in the HP AdvanceStack product line. This group supports devices with multiple repeater segments as well as devices with a single repeater segment.
.1.3.6.1.4.1.11.2.14.10.2.9.1.2.6,HP-ICF-8023-RPTR::hpicf8023MultiRptrMonitorGroup,,,,,,A collection of extended counters for 802.3 repeaters in the HP AdvanceStack product line. This group supports devices with multiple repeater segments as well as devices with a single repeater segment.
.1.3.6.1.4.1.11.2.14.10.2.9.1.2.7,HP-ICF-8023-RPTR::hpicf8023RptrNotifyGroup,,,,,,********* THIS GROUP IS DEPRECATED ********* A collection of notifications used to indicate changes in port status for 802.3 repeaters in the HP AdvanceStack product line.
.1.3.6.1.4.1.11.2.14.10.2.9.1.2.8,HP-ICF-8023-RPTR::hpicf8023MultiRptrNotifyGroup,,,,,,A collection of notifications used to indicate changes in port status for 802.3 repeaters in the HP AdvanceStack product line. Notifications in this group use different traps for good->bad than are used for bad->good (similar to linkUp/linkDown).
.1.3.6.1.4.1.11.2.14.10.2.9.1.2.9,HP-ICF-8023-RPTR::hpicf8023RpMauAutoNegGroup,,,,,,A collection of objects for managing MAUs attached to repeater ports with managed auto-negotiation.
.1.3.6.1.4.1.11.2.14.10.2.9.1.2.10,HP-ICF-8023-RPTR::hpicf8023Rptr100BasicGroup,,,,,,A collection of HP specific extensions to the 802.3 Repeater MIB for products in the HP AdvanceStack product line. This group supports devices with multiple repeater segments as well as devices with a single repeater segment. This group supports devices with 100BaseT repeater segments.
.1.3.6.1.4.1.11.2.14.10.2.10,HP-ICF-OID::icfVgRepeaterMib,,,,,,
.1.3.6.1.4.1.11.2.14.10.2.10.1,ICF-VG-RPTR::icfVgRepeaterConformance,,,,,,
.1.3.6.1.4.1.11.2.14.10.2.10.1.1,ICF-VG-RPTR::icfVgRepeaterCompliances,,,,,,
.1.3.6.1.4.1.11.2.14.10.2.10.1.1.1,ICF-VG-RPTR::icfVgRptrPreStdCompliance,,,,,,********* THIS COMPLIANCE IS OBSOLETE ********* The compliance statement for pre-standard 802.12 repeater management.
.1.3.6.1.4.1.11.2.14.10.2.10.1.1.2,ICF-VG-RPTR::icfVgRptrCompliance,,,,,,The compliance statement for 802.12 repeater management.
.1.3.6.1.4.1.11.2.14.10.2.10.1.2,ICF-VG-RPTR::icfVgRepeaterGroups,,,,,,
.1.3.6.1.4.1.11.2.14.10.2.10.1.2.1,ICF-VG-RPTR::icfVgRptrBasicGroup,,,,,,A collection of objects for managing the status and configuration of IEEE 802.12 repeaters.
.1.3.6.1.4.1.11.2.14.10.2.10.1.2.2,ICF-VG-RPTR::icfVgRptrPreStdMonitorGroup,,,,,,********* THIS GROUP IS OBSOLETE ********* A collection of objects for providing statistics for pre-standard IEEE 802.12 repeaters.
.1.3.6.1.4.1.11.2.14.10.2.10.1.2.3,ICF-VG-RPTR::icfVgRptrPreStdAddrTrackGroup,,,,,,********* THIS GROUP IS OBSOLETE ********* A collection of objects for tracking addresses on pre-standard IEEE 802.12 repeaters.
.1.3.6.1.4.1.11.2.14.10.2.10.1.2.4,ICF-VG-RPTR::icfVgRptrMonitorGroup,,,,,,A collection of objects for providing statistics for IEEE 802.12 repeaters.
.1.3.6.1.4.1.11.2.14.10.2.10.1.2.5,ICF-VG-RPTR::icfVgRptrAddrTrackGroup,,,,,,A collection of objects for tracking addresses on IEEE 802.12 repeaters.
.1.3.6.1.4.1.11.2.14.10.2.10.1.2.6,ICF-VG-RPTR::icfVgRptrNotificationsGroup,,,,,,A collection of notifications used to indicate 802.12 repeater general status changes.
.1.3.6.1.4.1.11.2.14.10.2.11,HP-ICF-OID::hpicfVgRptrMib,,,,,,
.1.3.6.1.4.1.11.2.14.10.2.11.1,HP-ICF-VG-RPTR::hpicfVgRptrConformance,,,,,,
.1.3.6.1.4.1.11.2.14.10.2.11.1.1,HP-ICF-VG-RPTR::hpicfVgRptrCompliances,,,,,,
.1.3.6.1.4.1.11.2.14.10.2.11.1.1.1,HP-ICF-VG-RPTR::hpicfVgRptrPreDot12Compliance,,,,,,********* THIS COMPLIANCE IS OBSOLETE ********* The compliance statement for pre-standard HP 100VG repeaters.
.1.3.6.1.4.1.11.2.14.10.2.11.1.1.2,HP-ICF-VG-RPTR::hpicfVgRptrCompliance,,,,,,The compliance statement for HP 802.12 repeaters.
.1.3.6.1.4.1.11.2.14.10.2.11.1.2,HP-ICF-VG-RPTR::hpicfVgRptrGroups,,,,,,
.1.3.6.1.4.1.11.2.14.10.2.11.1.2.1,HP-ICF-VG-RPTR::hpicfVgRptrPreDot12BasicGroup,,,,,,********* THIS GROUP IS OBSOLETE ********* HP specific extensions to the 802.12 Repeater MIB providing status and configuration of pre-standard 802.12 repeaters.
.1.3.6.1.4.1.11.2.14.10.2.11.1.2.2,HP-ICF-VG-RPTR::hpicfVgRptrBasicGroup,,,,,,HP specific extensions to the 802.12 Repeater MIB providing status and configuration of 802.12 repeaters.
.1.3.6.1.4.1.11.2.14.10.2.11.1.2.3,HP-ICF-VG-RPTR::hpicfVgRptrPreDot12MonitorGroup,,,,,,********* THIS GROUP IS OBSOLETE ********* HP specific extensions to the 802.12 Repeater MIB providing global counters for pre-standard 802.12 repeaters.
.1.3.6.1.4.1.11.2.14.10.2.11.1.2.4,HP-ICF-VG-RPTR::hpicfVgRptrMonitorGroup,,,,,,HP specific extensions to the 802.12 Repeater MIB providing global counters for 802.12 repeaters.
.1.3.6.1.4.1.11.2.14.10.2.11.1.2.5,HP-ICF-VG-RPTR::hpicfVgRptrXcvrGroup,,,,,,A collection of objects for configuring and monitoring tranceivers on 802.12 repeaters.
.1.3.6.1.4.1.11.2.14.10.2.11.1.2.6,HP-ICF-VG-RPTR::hpicfVgRptrRedundantUplinkGroup,,,,,,A collection of objects for configuring  redundant uplinks on 802.12 repeaters.
.1.3.6.1.4.1.11.2.14.10.2.11.1.2.7,HP-ICF-VG-RPTR::hpicfVgRptrBasicTraps,,,,,,A collection of notifications used to indicate port status changes on 802.12 repeaters.
.1.3.6.1.4.1.11.2.14.10.2.11.1.2.8,HP-ICF-VG-RPTR::hpicfVgRptrRedundantUplinkTraps,,,,,,A collection of notifications used to indicate status changes on the redundant uplinks on 802.12 repeaters.
.1.3.6.1.4.1.11.2.14.10.2.12,HP-ICF-OID::hpicfFaultFinderMib,,,,,,
.1.3.6.1.4.1.11.2.14.10.2.12.1,HP-ICF-FAULT-FINDER-MIB::hpicfFaultFinderConformance,,,,,,
.1.3.6.1.4.1.11.2.14.10.2.12.1.1,HP-ICF-FAULT-FINDER-MIB::hpicfFaultFinderCompliances,,,,,,
.1.3.6.1.4.1.11.2.14.10.2.12.1.1.1,HP-ICF-FAULT-FINDER-MIB::hpicfFaultFinderCompliance,,,,,,The compliance statement for devices implementing the HP Fault Finder capability.
.1.3.6.1.4.1.11.2.14.10.2.12.1.1.2,HP-ICF-FAULT-FINDER-MIB::hpicfFaultFinder2Compliance,,,,,,The compliance statement for devices implementing the HP Fault Finder capability.
.1.3.6.1.4.1.11.2.14.10.2.12.1.1.3,HP-ICF-FAULT-FINDER-MIB::hpicfFaultStatusCompliance,,,,,,The compliance statement for devices implementing the switch fault status.
.1.3.6.1.4.1.11.2.14.10.2.12.1.2,HP-ICF-FAULT-FINDER-MIB::hpicfFaultFinderGroups,,,,,,
.1.3.6.1.4.1.11.2.14.10.2.12.1.2.1,HP-ICF-FAULT-FINDER-MIB::hpicfFaultConfigGroup,,,,,,A collection of objects for configuring the Fault Finder feature.
.1.3.6.1.4.1.11.2.14.10.2.12.1.2.2,HP-ICF-FAULT-FINDER-MIB::hpicfFaultLogGroup,,,,,,A collection of objects for accessing the log of discovered faults.
.1.3.6.1.4.1.11.2.14.10.2.12.1.2.3,HP-ICF-FAULT-FINDER-MIB::hpicfFaultNotifyGroup,,,,,,A collection of notifications used to indicate the discovery of a network fault.
.1.3.6.1.4.1.11.2.14.10.2.12.1.2.4,HP-ICF-FAULT-FINDER-MIB::hpicfFaultConfig2Group,,,,,,A collection of objects for configuring the Fault Finder feature, including the ability to reduce a port's media speed in the event of a fault.
.1.3.6.1.4.1.11.2.14.10.2.12.1.2.5,HP-ICF-FAULT-FINDER-MIB::hpicfFaultStatusGroup,,,,,,A collection of objects used to indicate fault status.
.1.3.6.1.4.1.11.2.14.10.2.13,HP-ICF-OID::hpicfJumboMIB,,,,,,
.1.3.6.1.4.1.11.2.14.10.2.13.1,HP-ICF-JUMBO-MIB::hpicfJumboObjects,,,,,,
.1.3.6.1.4.1.11.2.14.10.2.13.1.1,HP-ICF-JUMBO-MIB::hpJumboStats,,,,,,
.1.3.6.1.4.1.11.2.14.10.2.13.1.1.1,HP-ICF-JUMBO-MIB::hpJumboStatsTable,,not-accessible,,current,,A table that contains jumbos information about the physical ports of this device.
.1.3.6.1.4.1.11.2.14.10.2.13.1.1.1.1,HP-ICF-JUMBO-MIB::hpJumboStatsEntry,,not-accessible,hpJumboStatsIndex,current,,Information about the physical ports of this device.
.1.3.6.1.4.1.11.2.14.10.2.13.1.1.1.1.1,HP-ICF-JUMBO-MIB::hpJumboStatsIndex,Integer32,read-only,,current,,The interface index associated with this set of  counters.
.1.3.6.1.4.1.11.2.14.10.2.13.1.1.1.1.2,HP-ICF-JUMBO-MIB::hpJumboStatsPkts1523to2047Octets,Counter32,read-only,,current,,The total number of packets (including bad packets) received that were between 1523 and 2047 octets in length inclusive (excluding framing bits but including FCS octets).
.1.3.6.1.4.1.11.2.14.10.2.13.1.1.1.1.3,HP-ICF-JUMBO-MIB::hpJumboStatsPkts2048to4095Octets,Counter32,read-only,,current,,The total number of packets (including bad packets) received that were between 2048 and 4095 octets in length inclusive (excluding framing bits but including FCS octets).
.1.3.6.1.4.1.11.2.14.10.2.13.1.1.1.1.4,HP-ICF-JUMBO-MIB::hpJumboStatsPkts4096to9216Octets,Counter32,read-only,,current,,The total number of packets (including bad packets) received that were between 4096 and 9216 octets in length inclusive (excluding framing bits but including FCS octets).
.1.3.6.1.4.1.11.2.14.10.2.13.2,HP-ICF-JUMBO-MIB::hpicfJumboConformance,,,,,,
.1.3.6.1.4.1.11.2.14.10.2.13.2.1,HP-ICF-JUMBO-MIB::hpicfJumboGroups,,,,,,
.1.3.6.1.4.1.11.2.14.10.2.13.2.1.1,HP-ICF-JUMBO-MIB::hpicfJumboStatsGroup,,,,,,A collection of objects providing private HP Jumbo packet statistics.
.1.3.6.1.4.1.11.2.14.10.2.13.2.2,HP-ICF-JUMBO-MIB::hpicfJumboCompliances,,,,,,
.1.3.6.1.4.1.11.2.14.10.2.13.2.2.1,HP-ICF-JUMBO-MIB::hpicfJumboCompliance,,,,,,The compliance statement for devices support of HP-ICF-JUMBO MIB.
.1.3.6.1.4.1.11.2.14.10.2.14,HP-ICF-OID::hpicfRateLimitMIB,,,,,,
.1.3.6.1.4.1.11.2.14.10.2.14.1,HP-ICF-RATE-LIMIT-MIB::hpicfRateLimitObjects,,,,,,
.1.3.6.1.4.1.11.2.14.10.2.14.1.1,HP-ICF-RATE-LIMIT-MIB::hpicfICMPRateLimitObjects,,,,,,
.1.3.6.1.4.1.11.2.14.10.2.14.1.1.1,HP-ICF-RATE-LIMIT-MIB::hpICMPRateLimitConfig,,,,,,
.1.3.6.1.4.1.11.2.14.10.2.14.1.1.1.1,HP-ICF-RATE-LIMIT-MIB::hpICMPRateLimitPortConfigTable,,not-accessible,,current,,A table that contains configuration objects on ICMP  rate limit on a per interface basis.
.1.3.6.1.4.1.11.2.14.10.2.14.1.1.1.1.1,HP-ICF-RATE-LIMIT-MIB::hpICMPRateLimitPortConfigEntry,,not-accessible,hpICMPRateLimitPortConfigIndex,current,,Entry that contains configuration objects on ICMP  rate limit on a per interface basis
.1.3.6.1.4.1.11.2.14.10.2.14.1.1.1.1.1.1,HP-ICF-RATE-LIMIT-MIB::hpICMPRateLimitPortConfigIndex,Integer32,not-accessible,,current,,The interface index associated with this entry.
.1.3.6.1.4.1.11.2.14.10.2.14.1.1.1.1.1.2,HP-ICF-RATE-LIMIT-MIB::hpICMPRateLimitPortState,INTEGER,read-write,,deprecated,enabled(1):disabled(2),This object indicates whether ICMP rate limiting is enabled on the corresponding port. Because this is a State object it cannot distinguish between percent-based ICMP Rate-Limiting and the newer Kbps-based ICMP Rate-Limiting. Therefore, it has been  deprecated in favor of hpICMPRateLimitPortControlMode.
.1.3.6.1.4.1.11.2.14.10.2.14.1.1.1.1.1.3,HP-ICF-RATE-LIMIT-MIB::hpICMPRateLimitPortPrct,Integer32,read-write,,current,,This indicates the percent of ICMP rate limit on  the port. The value of this object must be  interpreted under the context of  hpICMPRateLimitPortState. A value of 0 is not the same as disabling, but rather all ICMP traffic must be dropped.
.1.3.6.1.4.1.11.2.14.10.2.14.1.1.1.1.1.4,HP-ICF-RATE-LIMIT-MIB::hpICMPRateLimitPortAlarmFlag,INTEGER,read-write,,current,clear(1):set(2),This object indicates whether ICMP rate limiting  alarm has been sent. When an alarm is sent, this object is set to set(2). Once a management station changes this object to clear(1), an alarm can be sent again for this port.
.1.3.6.1.4.1.11.2.14.10.2.14.1.1.1.1.1.5,HP-ICF-RATE-LIMIT-MIB::hpICMPRateLimitPortKbps,Integer32,read-write,,current,,The maximum Kilobits-per-second of ICMP traffic that may  be received inbound on the port. The value of this  object must be interpreted under the context of  hpICMPRateLimitControlMode. A value of 0 is not the same as disabling, but means instead that all ICMP  traffic must be dropped.
.1.3.6.1.4.1.11.2.14.10.2.14.1.1.1.1.1.6,HP-ICF-RATE-LIMIT-MIB::hpICMPRateLimitPortControlMode,INTEGER,read-write,,current,disabled(1):portPrct(2):portKbps(3),The mode by which inbound ICMP traffic on this port will  Rate-Limited. If icmpRateLimitPerPortOnly is configured,  the entire port. If icmpRateLimitPerPortOnlyKbpsMode is  configured, there will be a single maximum kilobits-per- second rate for the entire port. When ICMP rate-limiting  is disabled, there are no maximum controls on inbound ICMP traffic for this port.
.1.3.6.1.4.1.11.2.14.10.2.14.1.1.1.1.1.7,HP-ICF-RATE-LIMIT-MIB::hpICMPRateLimitPortIpPacketType,INTEGER,read-write,,current,ipv4PacketsOnly(1):ipv6PacketsOnly(2):ipv4AndIpv6Packets(3),This object represents the type(s) of IP packet to which the specified ICMP rate-limit will be applied. The default is IPv4.
.1.3.6.1.4.1.11.2.14.10.2.14.1.1.2,HP-ICF-RATE-LIMIT-MIB::hpICMPRateLimitNotifyPortIndex,Integer32,accessible-for-notify,,current,,The interface index associated with  hpICMPRateLimitPortNotification event.
.1.3.6.1.4.1.11.2.14.10.2.14.1.2,HP-ICF-RATE-LIMIT-MIB::hpicfBWMinEgressObjects,,,,,,
.1.3.6.1.4.1.11.2.14.10.2.14.1.2.1,HP-ICF-RATE-LIMIT-MIB::hpBWMinEgressPortConfig,,,,,,
.1.3.6.1.4.1.11.2.14.10.2.14.1.2.1.1,HP-ICF-RATE-LIMIT-MIB::hpBWMinEgressPortNumQueues,Integer32,read-only,,current,,The number of bandwidth minimum egress queues supported on this system.
.1.3.6.1.4.1.11.2.14.10.2.14.1.2.1.2,HP-ICF-RATE-LIMIT-MIB::hpBWMinEgressPortPrctTable,,not-accessible,,current,,A table that contains information about the port's egress determined by hpBWMinEgressPortNumQueues. The priority of  the queues is in ascending order, starting with queue one  being the lowest and queue hpBWMinEgressPortNumQueues  being the highest.
.1.3.6.1.4.1.11.2.14.10.2.14.1.2.1.2.1,HP-ICF-RATE-LIMIT-MIB::hpBWMinEgressPortPrctEntry,,not-accessible,ifIndex:hpBWMinEgressPortPrctQueue,current,,The information associated with each port's egress Guaranteed Minimum Bandwidth percent configuration.
.1.3.6.1.4.1.11.2.14.10.2.14.1.2.1.2.1.1,HP-ICF-RATE-LIMIT-MIB::hpBWMinEgressPortPrctQueue,Integer32,not-accessible,,current,,The queue associated with this entry. The priority of  the queues is in ascending order, starting with queue one  being the lowest and queue hpBWMinEgressPortNumQueues  being the highest.
.1.3.6.1.4.1.11.2.14.10.2.14.1.2.1.2.1.2,HP-ICF-RATE-LIMIT-MIB::hpBWMinEgressPortPrct,Integer32,read-write,,current,,The percentage of Guaranteed Minimum bandwidth to be  assigned to this egress queue for this port. Total values  for all queues must not exceed 100 percent.
.1.3.6.1.4.1.11.2.14.10.2.14.1.3,HP-ICF-RATE-LIMIT-MIB::hpicfBWMinIngressObjects,,,,,,
.1.3.6.1.4.1.11.2.14.10.2.14.1.3.1,HP-ICF-RATE-LIMIT-MIB::hpBWMinIngressPortConfig,,,,,,
.1.3.6.1.4.1.11.2.14.10.2.14.1.3.1.1,HP-ICF-RATE-LIMIT-MIB::hpBWMinIngressPortNumQueues,Integer32,read-only,,current,,The number of bandwidth minimum ingress queues supported  on this system.
.1.3.6.1.4.1.11.2.14.10.2.14.1.3.1.2,HP-ICF-RATE-LIMIT-MIB::hpBWMinIngressPortPrctTable,,not-accessible,,current,,A table that contains information about the port's configurations on this switch. The number of entries in  this table is determined by hpBWMinIngressPortNumQueues.  The priority of the queues is in ascending order, starting  with queue one being the lowest and queue  hpBWMinIngressPortNumQueues being the highest.
.1.3.6.1.4.1.11.2.14.10.2.14.1.3.1.2.1,HP-ICF-RATE-LIMIT-MIB::hpBWMinIngressPortPrctEntry,,not-accessible,ifIndex:hpBWMinIngressPortPrctQueue,current,,The information associated with each port's ingress Guaranteed Minimum Bandwidth percent configuration.
.1.3.6.1.4.1.11.2.14.10.2.14.1.3.1.2.1.1,HP-ICF-RATE-LIMIT-MIB::hpBWMinIngressPortPrctQueue,Integer32,not-accessible,,current,,The queue associated with this entry. The priority of  the queues is in ascending order, starting with queue one  being the lowest and queue hpBWMinIngressPortNumQueues  being the highest.
.1.3.6.1.4.1.11.2.14.10.2.14.1.3.1.2.1.2,HP-ICF-RATE-LIMIT-MIB::hpBWMinIngressPortPrct,Integer32,read-write,,current,,The percentage of Guaranteed Minimum bandwidth to be  assigned to this ingress queue for this port. Total values  for all queues must not exceed 100 percent.
.1.3.6.1.4.1.11.2.14.10.2.14.1.4,HP-ICF-RATE-LIMIT-MIB::hpicfRateLimitPortObjects,,,,,,
.1.3.6.1.4.1.11.2.14.10.2.14.1.4.1,HP-ICF-RATE-LIMIT-MIB::hpRateLimitPortConfig,,,,,,
.1.3.6.1.4.1.11.2.14.10.2.14.1.4.1.1,HP-ICF-RATE-LIMIT-MIB::hpEgressRateLimitPortNumQueues,Integer32,read-only,,current,,The number of egress rate-limiting queues supported on  this system.
.1.3.6.1.4.1.11.2.14.10.2.14.1.4.1.2,HP-ICF-RATE-LIMIT-MIB::hpEgressRateLimitPortConfigTable,,not-accessible,,current,,A table that contains information about the port egress  Rate-Limiting configurations on this switch.
.1.3.6.1.4.1.11.2.14.10.2.14.1.4.1.2.1,HP-ICF-RATE-LIMIT-MIB::hpEgressRateLimitPortConfigEntry,,not-accessible,hpEgressRateLimitPortIndex,current,,The information associated with each port's egress  Rate-Limiting configuration.
.1.3.6.1.4.1.11.2.14.10.2.14.1.4.1.2.1.1,HP-ICF-RATE-LIMIT-MIB::hpEgressRateLimitPortIndex,Integer32,not-accessible,,current,,The ifIndex value which uniquely identifies a row in the  Interfaces Table.
.1.3.6.1.4.1.11.2.14.10.2.14.1.4.1.2.1.2,HP-ICF-RATE-LIMIT-MIB::hpEgressRateLimitPortControlMode,INTEGER,read-write,,current,disabled(1):egressRateLimitPerPortOnly(2):egressRateLimitPerQueue(3):egressRateLimitPerPortOnlyBpsMode(4):egressRateLimitPerQueueBpsMode(5):egressRateLimitPerPortOnlyKbpsMode(6),The mode by which this port will be Rate-Limited on egress. If egressRateLimitPerPortOnly is configured, there  will be a single maximum percentage-based rate for the  entire port. If egressRateLimitPerQueue is configured, the  values for each of the queues indicate the maximum percentage of port traffic that may be transmitted by that queue. If egressRateLimitPerPortOnlyBpsMode is configured,  there will be a single maximum bits-per-second rate for  the entire port. If egressRateLimitPerPortOnlyKbpsMode is configured, there will be a single maximum  kilobits-per-second rate for the entire port. If  egressRateLimitPerQueueBpsMode is configured, the maximum  transmission-rate values for each of the queues will be  expressed in bits-per-second (again, the sum of these  values must not exceed the maximum Bytes-per-second  capability of the network link). The queues are defined  under hpEgressRateLimitPortPrctTable. When egress  rate-limiting is disabled, there are no maximum controls  on egress for this port.
.1.3.6.1.4.1.11.2.14.10.2.14.1.4.1.2.1.3,HP-ICF-RATE-LIMIT-MIB::hpEgressRateLimitPortSingleControlPrct,Integer32,read-write,,current,,When hpEgressRateLimitPortControlMode is configured for egressRateLimitPerPortOnly, this value is the maximum percentage of traffic that may be transmitted by this port on egress.
.1.3.6.1.4.1.11.2.14.10.2.14.1.4.1.2.1.4,HP-ICF-RATE-LIMIT-MIB::hpEgressRateLimitPortSingleControlBps,Unsigned32,read-write,,deprecated,,When hpEgressRateLimitPortControlMode is configured for  egressRateLimitPerPortOnlyBpsMode, this value is the  maximum bits-per-second of traffic that may be transmitted  by this port on egress.
.1.3.6.1.4.1.11.2.14.10.2.14.1.4.1.2.1.5,HP-ICF-RATE-LIMIT-MIB::hpEgressRateLimitPortSingleControlKbps,Integer32,read-write,,current,,When hpEgressRateLimitPortControlMode is configured for  egressRateLimitPerPortOnlyKbpsMode, this value is the  maximum kilobits-per-second of traffic that may be  transmitted by this port on egress.
.1.3.6.1.4.1.11.2.14.10.2.14.1.4.1.3,HP-ICF-RATE-LIMIT-MIB::hpEgressRateLimitPortPrctTable,,not-accessible,,current,,A table that contains information about the port egress  Rate-Limiting percent configurations on this switch. The  number of entries in this table is determined by  hpEgressRateLimitPortNumQueues. The priority of the  queues is in ascending order, starting with queue one  being the lowest priority and queue  hpEgressRateLimitPortNumQueues being the highest  priority.
.1.3.6.1.4.1.11.2.14.10.2.14.1.4.1.3.1,HP-ICF-RATE-LIMIT-MIB::hpEgressRateLimitPortPrctEntry,,not-accessible,hpEgressRateLimitPortIndex:hpEgressRateLimitPortPrctQueue,current,,The information associated with each port's egress Rate-Limiting percent configuration.
.1.3.6.1.4.1.11.2.14.10.2.14.1.4.1.3.1.1,HP-ICF-RATE-LIMIT-MIB::hpEgressRateLimitPortPrctQueue,Integer32,not-accessible,,current,,The queue associated with this entry. The priority o of the queues is in ascending order, starting with  queue one being the lowest and queue  hpEgressRateLimitgressPortNumQueues being the highest.
.1.3.6.1.4.1.11.2.14.10.2.14.1.4.1.3.1.2,HP-ICF-RATE-LIMIT-MIB::hpEgressRateLimitPortPrct,Integer32,read-write,,current,,The maximum percentage of traffic that may be  transmitted by this port's queue on egress. hpEgressRateLimitPortControlMode must be configured to use egressRateLimitPerQueue for this to take effect. A  value of 0-percent for any queue means that no traffic  will ever be transmitted on this port for that egress  queue.
.1.3.6.1.4.1.11.2.14.10.2.14.1.4.1.4,HP-ICF-RATE-LIMIT-MIB::hpEgressRateLimitPortBpsTable,,not-accessible,,deprecated,,A table that contains information about the port egress Rate-Limiting bits-per-second configurations on this switch. The number of entries in this table is determined  being the lowest priority and queue  hpEgressRateLimitPortNumQueues being the highest  priority queue.
.1.3.6.1.4.1.11.2.14.10.2.14.1.4.1.4.1,HP-ICF-RATE-LIMIT-MIB::hpEgressRateLimitPortBpsEntry,,not-accessible,hpEgressRateLimitPortIndex:hpEgressRateLimitPortBpsQueue,deprecated,,The information associated with each port's egress Rate-Limiting bits-per-second configuration.
.1.3.6.1.4.1.11.2.14.10.2.14.1.4.1.4.1.1,HP-ICF-RATE-LIMIT-MIB::hpEgressRateLimitPortBpsQueue,Integer32,not-accessible,,deprecated,,The queue associated with this entry. The priority of  being the lowest and queue  hpEgressRateLimitgressPortNumQueues being the highest.
.1.3.6.1.4.1.11.2.14.10.2.14.1.4.1.4.1.2,HP-ICF-RATE-LIMIT-MIB::hpEgressRateLimitPortBps,Unsigned32,read-write,,deprecated,,The maximum bits-per-second of traffic that may be  transmitted by this port's queue on egress. hpEgressRateLimitPortControlMode must be configured to use  egressRateLimitPerQueue for this to take effect. A value of 0-percent for any queue means that no traffic will ever  be transmitted on this port for that egress queue. The  values for each queue must not exceed the bits-per-second  capability of the current network link speed.
.1.3.6.1.4.1.11.2.14.10.2.14.1.5,HP-ICF-RATE-LIMIT-MIB::hpicfIngressRateLimitPortObjects,,,,,,
.1.3.6.1.4.1.11.2.14.10.2.14.1.5.1,HP-ICF-RATE-LIMIT-MIB::hpRateLimitIngressPortConfig,,,,,,
.1.3.6.1.4.1.11.2.14.10.2.14.1.5.1.1,HP-ICF-RATE-LIMIT-MIB::hpIngressRateLimitPortNumQueues,Integer32,read-only,,current,,The number of ingress rate-limiting queues supported on  this system.
.1.3.6.1.4.1.11.2.14.10.2.14.1.5.1.2,HP-ICF-RATE-LIMIT-MIB::hpIngressRateLimitPortConfigTable,,not-accessible,,current,,A table that contains information about the port ingress  Rate-Limiting configurations on this switch.
.1.3.6.1.4.1.11.2.14.10.2.14.1.5.1.2.1,HP-ICF-RATE-LIMIT-MIB::hpIngressRateLimitPortConfigEntry,,not-accessible,hpIngressRateLimitPortIndex,current,,The information associated with each port's ingress  Rate-Limiting configuration.
.1.3.6.1.4.1.11.2.14.10.2.14.1.5.1.2.1.1,HP-ICF-RATE-LIMIT-MIB::hpIngressRateLimitPortIndex,Integer32,not-accessible,,current,,The ifIndex value which uniquely identifies a row in the  Interfaces Table.
.1.3.6.1.4.1.11.2.14.10.2.14.1.5.1.2.1.2,HP-ICF-RATE-LIMIT-MIB::hpIngressRateLimitPortControlMode,INTEGER,read-write,,current,disabled(1):ingressRateLimitPerPortOnly(2):ingressRateLimitPerQueue(3):ingressRateLimitPerPortOnlyBpsMode(4):ingressRateLimitPerQueueBpsMode(5):ingressRateLimitPerPortOnlyKbpsMode(6),The mode by which this port will be Rate-Limited on ingress. If ingressRateLimitPerPortOnly is configured,  the entire port. If ingressRateLimitPerQueue is  configured, the values for each of the queues indicate the  maximum percentage of port traffic that may be transmitted  by that queue. If ingressRateLimitPerPortOnlyBpsMode is  configured, there will be a single maximum bits-per-second  rate for the entire port. If  ingressRateLimitPerPortOnlyKbpsMode is configured, there will be a single maximum kilobits-per-second rate for the entire port. If ingressRateLimitPerQueueBpsMode is  configured, the maximum transmission-rate values for each  of the queues will be expressed in bits-per-second (again,  the sum of these values must not exceed the maximum  Bytes-per-second capability of the network link). The  queues are defined under hpIngressRateLimitPortPrctTable.  When ingress rate-limiting is disabled, there are no  maximum controls on ingress for this port.
.1.3.6.1.4.1.11.2.14.10.2.14.1.5.1.2.1.3,HP-ICF-RATE-LIMIT-MIB::hpIngressRateLimitPortSingleControlPrct,Integer32,read-write,,current,,When hpIngressRateLimitPortControlMode is configured for ingressRateLimitPerPortOnly, this value is the maximum percentage of traffic that may be transmitted by this port on egress.
.1.3.6.1.4.1.11.2.14.10.2.14.1.5.1.2.1.4,HP-ICF-RATE-LIMIT-MIB::hpIngressRateLimitPortSingleControlBps,Unsigned32,read-write,,deprecated,,When hpIngressRateLimitPortControlMode is configured for  ingressRateLimitPerPortOnlyBpsMode, this value is the  maximum bits-per-second of traffic that may be transmitted  by this port on ingress.
.1.3.6.1.4.1.11.2.14.10.2.14.1.5.1.2.1.5,HP-ICF-RATE-LIMIT-MIB::hpIngressRateLimitPortSingleControlKbps,Integer32,read-write,,current,,When hpIngressRateLimitPortControlMode is configured for  ingressRateLimitPerPortOnlyKbpsMode, this value is the  maximum kilobits-per-second of traffic that may be  transmitted by this port on ingress.
.1.3.6.1.4.1.11.2.14.10.2.14.1.5.1.3,HP-ICF-RATE-LIMIT-MIB::hpIngressRateLimitPortPrctTable,,not-accessible,,current,,A table that contains information about the port ingress  Rate-Limiting percent configurations on this switch. The  number of entries in this table is determined by  hpIngressRateLimitPortNumQueues. The priority of the  queues is in ascending order, starting with queue one  being the lowest priority and queue  hpIngressRateLimitPortNumQueues being the highest  priority.
.1.3.6.1.4.1.11.2.14.10.2.14.1.5.1.3.1,HP-ICF-RATE-LIMIT-MIB::hpIngressRateLimitPortPrctEntry,,not-accessible,hpIngressRateLimitPortIndex:hpIngressRateLimitPortPrctQueue,current,,The information associated with each port's ingress Rate-Limiting percent configuration.
.1.3.6.1.4.1.11.2.14.10.2.14.1.5.1.3.1.1,HP-ICF-RATE-LIMIT-MIB::hpIngressRateLimitPortPrctQueue,Integer32,not-accessible,,current,,The queue associated with this entry. The priority  of the queues is in ascending order, starting with  queue one being the lowest and queue  hpIngressRateLimitgressPortNumQueues being the highest.
.1.3.6.1.4.1.11.2.14.10.2.14.1.5.1.3.1.2,HP-ICF-RATE-LIMIT-MIB::hpIngressRateLimitPortPrct,Integer32,read-write,,current,,The maximum percentage of traffic that may be  transmitted by this port's queue on ingress. hpIngressRateLimitPortControlMode must be configured to use ingressRateLimitPerQueue for this to take effect. A  value of 0-percent for any queue means that no traffic  will ever be transmitted on this port for that ingress  queue. The values for each queue must not exceed 100 percent.
.1.3.6.1.4.1.11.2.14.10.2.14.1.5.1.4,HP-ICF-RATE-LIMIT-MIB::hpIngressRateLimitPortBpsTable,,not-accessible,,deprecated,,A table that contains information about the port ingress Rate-Limiting bits-per-second configurations on this switch. The number of entries in this table is determined  being the lowest priority and queue  hpIngressRateLimitPortNumQueues being the highest  priority queue.
.1.3.6.1.4.1.11.2.14.10.2.14.1.5.1.4.1,HP-ICF-RATE-LIMIT-MIB::hpIngressRateLimitPortBpsEntry,,not-accessible,hpIngressRateLimitPortIndex:hpIngressRateLimitPortBpsQueue,deprecated,,The information associated with each port's egress Rate-Limiting bits-per-second configuration.
.1.3.6.1.4.1.11.2.14.10.2.14.1.5.1.4.1.1,HP-ICF-RATE-LIMIT-MIB::hpIngressRateLimitPortBpsQueue,Integer32,not-accessible,,deprecated,,The queue associated with this entry. The priority of  being the lowest and queue  hpIngressRateLimitgressPortNumQueues being the highest.
.1.3.6.1.4.1.11.2.14.10.2.14.1.5.1.4.1.2,HP-ICF-RATE-LIMIT-MIB::hpIngressRateLimitPortBps,Unsigned32,read-write,,deprecated,,The maximum bits-per-second of traffic that may be  transmitted by this port's queue on ingress. hpIngressRateLimitPortControlMode must be configured to  use ingressRateLimitPerQueue for this to take effect. A  value of 0-percent for any queue means that no traffic  will ever be transmitted on this port for that ingress  queue. The values for each queue must not exceed the  bits-per-second capability of the current network link  speed.
.1.3.6.1.4.1.11.2.14.10.2.14.1.6,HP-ICF-RATE-LIMIT-MIB::hpicfIngressBcastLimitPortObjects,,,,,,
.1.3.6.1.4.1.11.2.14.10.2.14.1.6.1,HP-ICF-RATE-LIMIT-MIB::hpBcastLimitIngressPortConfig,,,,,,
.1.3.6.1.4.1.11.2.14.10.2.14.1.6.1.1,HP-ICF-RATE-LIMIT-MIB::hpIngressBcastLimitPortConfigTable,,not-accessible,,current,,A table that contains information about the port ingress  Broadcast-Limiting configurations on this switch.
.1.3.6.1.4.1.11.2.14.10.2.14.1.6.1.1.1,HP-ICF-RATE-LIMIT-MIB::hpIngressBcastLimitPortConfigEntry,,not-accessible,hpIngressBcastLimitPortIndex,current,,The information associated with each port's ingress  Broadcast-Limiting configuration.
.1.3.6.1.4.1.11.2.14.10.2.14.1.6.1.1.1.1,HP-ICF-RATE-LIMIT-MIB::hpIngressBcastLimitPortIndex,Integer32,not-accessible,,current,,The ifIndex value which uniquely identifies a row in the  Interfaces Table.
.1.3.6.1.4.1.11.2.14.10.2.14.1.6.1.1.1.2,HP-ICF-RATE-LIMIT-MIB::hpIngressBcastLimitPortControlMode,INTEGER,read-write,,current,disabled(1):ingressBcastLimitPerPortOnly(2):ingressBcastLimitPerPortOnlyKbpsMode(3),The mode by which this port will be Broadcast-Limited on ingress. If ingressBcastLimitPerPortOnly is configured,  the entire port. If ingressBcastLimitPerPortOnlyKbpsMode is configured, there will be a single maximum  kilobits-per-second maximum broadcast traffic rate for the entire port.When ingress Bcast-limiting is disabled,  there are no maximum controls on ingress for this port.
.1.3.6.1.4.1.11.2.14.10.2.14.1.6.1.1.1.3,HP-ICF-RATE-LIMIT-MIB::hpIngressBcastLimitPortSingleControlPrct,Integer32,read-write,,current,,When hpIngressBcastLimitPortControlMode is configured for ingressBcastLimitPerPortOnly, this value is the maximum percentage of traffic that may be transmitted by this port on ingress.
.1.3.6.1.4.1.11.2.14.10.2.14.1.6.1.1.1.4,HP-ICF-RATE-LIMIT-MIB::hpIngressBcastLimitPortSingleControlKbps,Integer32,read-write,,current,,When hpIngressBcastLimitPortControlMode is configured for ingressBcastLimitPerPortOnlyKbpsMode, this value is the maximum kilobits-per-second of broadcast traffic that may be transmitted by this port on ingress.
.1.3.6.1.4.1.11.2.14.10.2.14.1.7,HP-ICF-RATE-LIMIT-MIB::hpicfIngressMcastLimitPortObjects,,,,,,
.1.3.6.1.4.1.11.2.14.10.2.14.1.7.1,HP-ICF-RATE-LIMIT-MIB::hpMcastLimitIngressPortConfig,,,,,,
.1.3.6.1.4.1.11.2.14.10.2.14.1.7.1.1,HP-ICF-RATE-LIMIT-MIB::hpIngressMcastLimitPortConfigTable,,not-accessible,,current,,A table that contains information about the port ingress  Multicast-Limiting configurations on this switch.
.1.3.6.1.4.1.11.2.14.10.2.14.1.7.1.1.1,HP-ICF-RATE-LIMIT-MIB::hpIngressMcastLimitPortConfigEntry,,not-accessible,hpIngressMcastLimitPortIndex,current,,The information associated with each port's ingress  Multicast-Limiting configuration.
.1.3.6.1.4.1.11.2.14.10.2.14.1.7.1.1.1.1,HP-ICF-RATE-LIMIT-MIB::hpIngressMcastLimitPortIndex,Integer32,not-accessible,,current,,The ifIndex value which uniquely identifies a row in the  Interfaces Table.
.1.3.6.1.4.1.11.2.14.10.2.14.1.7.1.1.1.2,HP-ICF-RATE-LIMIT-MIB::hpIngressMcastLimitPortControlMode,INTEGER,read-write,,current,disabled(1):ingressMcastLimitPerPortOnly(2):ingressMcastLimitPerPortOnlyKbpsMode(3),The mode by which this port will be Multicast-Limited on ingress. If ingressMcastLimitPerPortOnly is configured,  there will be a single maximum percentage-based Mcast for  the entire port. If ingressMcastLimitPerPortOnlyKbpsMode is configured, there will be a single maximum kilobits-per-second maximum multicast traffic rate for the entire port. When ingress Mcast-limiting is disabled,  there are no maximum controls on ingress for this port.
.1.3.6.1.4.1.11.2.14.10.2.14.1.7.1.1.1.3,HP-ICF-RATE-LIMIT-MIB::hpIngressMcastLimitPortSingleControlPrct,Integer32,read-write,,current,,When hpIngressMcastLimitPortControlMode is configured for ingressMcastLimitPerPortOnly, this value is the maximum percentage of multicast traffic that may be transmitted by this port on ingress.
.1.3.6.1.4.1.11.2.14.10.2.14.1.7.1.1.1.4,HP-ICF-RATE-LIMIT-MIB::hpIngressMcastLimitPortSingleControlKbps,Integer32,read-write,,current,,When hpIngressMcastLimitPortControlMode is configured  for ingressMcastLimitPerPortOnlyKbpsMode, this value is the maximum kilobits-per-second of multicast traffic that may be transmitted by this port on ingress.
.1.3.6.1.4.1.11.2.14.10.2.14.2,HP-ICF-RATE-LIMIT-MIB::hpicfRateLimitConformance,,,,,,
.1.3.6.1.4.1.11.2.14.10.2.14.2.1,HP-ICF-RATE-LIMIT-MIB::hpicfRateLimitGroups,,,,,,
.1.3.6.1.4.1.11.2.14.10.2.14.2.1.1,HP-ICF-RATE-LIMIT-MIB::hpICMPRateLimitPortConfigGroup,,,,,,A collection of objects providing configuration to ICMP rate limiting on an interface.
.1.3.6.1.4.1.11.2.14.10.2.14.2.1.2,HP-ICF-RATE-LIMIT-MIB::hpICMPRateLimitPortNotifyGroup,,,,,,A collection of notifications used to indicate ICMP rate limiting on an interface events.
.1.3.6.1.4.1.11.2.14.10.2.14.2.1.3,HP-ICF-RATE-LIMIT-MIB::hpBWMinIngressPortConfigGroup,,,,,,A collection of objects providing configuration to Guaranteed  Minimum ingress bandwidth on an interface.
.1.3.6.1.4.1.11.2.14.10.2.14.2.1.4,HP-ICF-RATE-LIMIT-MIB::hpBWMinEgressPortConfigGroup,,,,,,A collection of objects providing configuration to Guaranteed  Minimum egress bandwidth on an interface.
.1.3.6.1.4.1.11.2.14.10.2.14.2.1.5,HP-ICF-RATE-LIMIT-MIB::hpEgressRateLimitPortConfigGroup,,,,,,A collection of objects providing configuration to Egress  Rate-Limiting on an interface.
.1.3.6.1.4.1.11.2.14.10.2.14.2.1.6,HP-ICF-RATE-LIMIT-MIB::hpIngressRateLimitPortConfigGroup,,,,,,A collection of objects providing configuration to Ingress  Rate-Limiting on an interface.
.1.3.6.1.4.1.11.2.14.10.2.14.2.1.7,HP-ICF-RATE-LIMIT-MIB::hpICMPRateLimitPortConfigGroup2,,,,,,This replaces the deprecated hpICMPRateLimitPortConfigGroup. A collection of objects providing configuration to ICMP rate limiting on an interface.
.1.3.6.1.4.1.11.2.14.10.2.14.2.1.8,HP-ICF-RATE-LIMIT-MIB::hpEgressRateLimitPortConfigGroup2,,,,,,This replaces the deprecated hpEgressRateLimitPortConfigGroup. A collection of objects providing configuration to Egress  Rate-Limiting on an interface.
.1.3.6.1.4.1.11.2.14.10.2.14.2.1.9,HP-ICF-RATE-LIMIT-MIB::hpIngressRateLimitPortConfigGroup2,,,,,,This replaces the deprecated hpIngressRateLimitPortConfigGroup. A collection of objects providing configuration to Ingress  Rate-Limiting on an interface.
.1.3.6.1.4.1.11.2.14.10.2.14.2.1.10,HP-ICF-RATE-LIMIT-MIB::hpBcastLimitIngressPortConfigGroup,,,,,,A collection of objects providing configuration to  Ingress Broadcast Limiting on an interface.
.1.3.6.1.4.1.11.2.14.10.2.14.2.1.11,HP-ICF-RATE-LIMIT-MIB::hpMcastLimitIngressPortConfigGroup,,,,,,A collection of objects providing configuration to  Ingress Multicast Limiting on an interface.
.1.3.6.1.4.1.11.2.14.10.2.14.2.1.12,HP-ICF-RATE-LIMIT-MIB::hpBcastLimitIngressPortConfigGroup2,,,,,,This replaces the deprecated hpBcastLimitIngressPortConfigGroup. A collection of objects providing configuration of Ingress Broadcast Limiting on an interface.
.1.3.6.1.4.1.11.2.14.10.2.14.2.1.13,HP-ICF-RATE-LIMIT-MIB::hpMcastLimitIngressPortConfigGroup2,,,,,,This replaces the deprecated hpMcastLimitIngressPortConfigGroup  A collection of objects providing configuration of Ingress Multicast Limiting on an interface.
.1.3.6.1.4.1.11.2.14.10.2.14.2.1.14,HP-ICF-RATE-LIMIT-MIB::hpICMPRateLimitPortConfigGroup3,,,,,,This replaces the deprecated hpICMPRateLimitPortConfigGroup2. A collection of objects providing configuration for ICMP rate limiting on an interface.
.1.3.6.1.4.1.11.2.14.10.2.14.2.2,HP-ICF-RATE-LIMIT-MIB::hpicfRateLimitCompliances,,,,,,
.1.3.6.1.4.1.11.2.14.10.2.14.2.2.1,HP-ICF-RATE-LIMIT-MIB::hpicfRateLimitCompliance,,,,,,The compliance statement for device support of HP-ICF-RATE-LIMIT MIB.
.1.3.6.1.4.1.11.2.14.10.2.14.2.2.2,HP-ICF-RATE-LIMIT-MIB::hpicfRateLimitCompliance1,,,,,,The compliance statement for device support of HP-ICF-RATE-LIMIT MIB.
.1.3.6.1.4.1.11.2.14.10.2.14.2.2.3,HP-ICF-RATE-LIMIT-MIB::hpicfRateLimitCompliance2,,,,,,The compliance statement for device support of HP-ICF-RATE-LIMIT MIB.
.1.3.6.1.4.1.11.2.14.10.3,HP-ICF-OID::hpicfAgentModules,,,,,,
.1.3.6.1.4.1.11.2.14.10.3.1,HP-ICF-OID::hpicfETwistHubAgentsMib,,,,,,
.1.3.6.1.4.1.11.2.14.10.3.2,HP-ICF-OID::hpicfETwistBridgeAgentsMib,,,,,,
.1.3.6.1.4.1.11.2.14.10.3.3,HP-ICF-OID::hpicfAdvStk8023AgentsMib,,,,,,
.1.3.6.1.4.1.11.2.14.10.3.4,HP-ICF-OID::hpicfAdvStkVGAgentsMib,,,,,,
.1.3.6.1.4.1.11.2.14.10.4,HP-ICF-OID::hpicfTextualConventions,,,,,,
.1.3.6.1.4.1.11.2.14.11,HP-ICF-OID::hpicfObjects,,,,,,
.1.3.6.1.4.1.11.2.14.11.1,HP-ICF-OID::hpicfCommon,,,,,,
.1.3.6.1.4.1.11.2.14.11.1.1,HP-ICF-OID::hpicfChain,,,,,,
.1.3.6.1.4.1.11.2.14.11.1.1.1,HP-ICF-CHAIN::hpicfChainMaxMembers,Integer32,read-only,,current,,The maximum number of devices that can be  supported on the Distributed Management Chain from this agent.
.1.3.6.1.4.1.11.2.14.11.1.1.2,HP-ICF-CHAIN::hpicfChainCurMembers,Integer32,read-only,,current,,The number of devices currently on the  Distributed Management Chain connected to this  agent.
.1.3.6.1.4.1.11.2.14.11.1.1.3,HP-ICF-CHAIN::hpicfChainLastChange,TimeTicks,read-only,,current,,The value of sysUpTime on this agent the last  time a device was added to or removed from the  Distributed Management Chain connected to this  agent.
.1.3.6.1.4.1.11.2.14.11.1.1.4,HP-ICF-CHAIN::hpicfChainChanges,Counter32,read-only,,current,,A count of the number of times devices have been  added to or removed from the Distributed  Management Chain connected to this agent.
.1.3.6.1.4.1.11.2.14.11.1.1.5,HP-ICF-CHAIN::hpicfChainTable,,not-accessible,,current,,A table of boxes currently connected to the same  Distributed Management Chain as this agent.
.1.3.6.1.4.1.11.2.14.11.1.1.5.1,HP-ICF-CHAIN::hpicfChainEntry,,not-accessible,hpicfChainId,current,,An entry in the table describing a single box on  the Distributed Management Chain connected to this device.
.1.3.6.1.4.1.11.2.14.11.1.1.5.1.1,HP-ICF-CHAIN::hpicfChainId,OCTET,read-only,,current,,An identifier which uniquely identifies this  particular box. In practice, this will be a box serial number or MAC address.
.1.3.6.1.4.1.11.2.14.11.1.1.5.1.2,HP-ICF-CHAIN::hpicfChainObjectId,OBJECT,read-only,,current,,The authoritative identification of the box which provides an easy and unambiguous means for  determining the type of box.
.1.3.6.1.4.1.11.2.14.11.1.1.5.1.3,HP-ICF-CHAIN::hpicfChainTimestamp,TimeTicks,read-only,,current,,The value of the agent's sysUpTime at which this  box was last initialized. If the box has not been initialized since the last reinitialization of the agent, then this object has a zero value.
.1.3.6.1.4.1.11.2.14.11.1.1.5.1.4,HP-ICF-CHAIN::hpicfChainHasAgent,INTEGER,read-only,,current,true(1):false(2),This object will contain the value 'true' if this box contains at least one network management agent capable of responding to SNMP requests, and will  contain the value 'false' otherwise.
.1.3.6.1.4.1.11.2.14.11.1.1.5.1.5,HP-ICF-CHAIN::hpicfChainThisBox,INTEGER,read-only,,current,true(1):false(2),This object will contain the value 'true' if this entry in the chain table corresponds to the box  which contains the agent which is responding to this SNMP request, and will contain the value 'false' otherwise.
.1.3.6.1.4.1.11.2.14.11.1.1.5.1.6,HP-ICF-CHAIN::hpicfChainLocation,Integer32,read-write,,current,,This byte is settable by a management station and is not interpreted by the agent. The intent is that a management station can use it to assign an ordering to boxes on the chain that can later be used when displaying the chain.
.1.3.6.1.4.1.11.2.14.11.1.1.6,HP-ICF-CHAIN::hpicfChainViewTable,,not-accessible,,current,,This table contains one entry for each box on the Distributed Management Chain for which this agent  is able to act as a proxy.
.1.3.6.1.4.1.11.2.14.11.1.1.6.1,HP-ICF-CHAIN::hpicfChainViewEntry,,not-accessible,hpicfChainViewId,current,,An entry in the hpicfChainViewTable containing information about how to proxy to a single box.
.1.3.6.1.4.1.11.2.14.11.1.1.6.1.1,HP-ICF-CHAIN::hpicfChainViewId,OCTET,read-only,,current,,An identifier which uniquely identifies this  particular box. In practice, this will be a box serial number or MAC address.
.1.3.6.1.4.1.11.2.14.11.1.1.6.1.2,HP-ICF-CHAIN::hpicfChainViewName,OCTET,read-only,,current,,The local name of this box. This is used by the proxy agent for the box to determine which box on the Distributed Management Chain is being  addressed. If an agent does not use this method  to distinguish proxy destinations, it should  return a zero length octet string for this object. For SNMPv1, the destination box is specified by appending this name to the proxy agent's community name. For example, if this agent has a community with a community name of 'public', and the value of this object is 'repeater1', the community  'public/repeater1' will specify that the agent should proxy to the public community of the 'repeater1' box. The default value for this object for box-level  repeaters is an ASCII hex representation of the  low-order three bytes of the device MAC address.
.1.3.6.1.4.1.11.2.14.11.1.2,HP-ICF-OID::hpicfChassis,,,,,,
.1.3.6.1.4.1.11.2.14.11.1.2.1,HP-ICF-CHASSIS::hpicfChassisId,OCTET,read-only,,deprecated,,********* THIS OBJECT IS DEPRECATED ********* An identifier that uniquely identifies this  particular chassis. This will be the same value  as the instance of hpicfChainId for this chassis.
.1.3.6.1.4.1.11.2.14.11.1.2.2,HP-ICF-CHASSIS::hpicfChassisNumSlots,Integer32,read-only,,deprecated,,********* THIS OBJECT IS DEPRECATED ********* The number of slots in this chassis.
.1.3.6.1.4.1.11.2.14.11.1.2.3,HP-ICF-CHASSIS::hpicfSlotTable,,not-accessible,,deprecated,,********* THIS OBJECT IS DEPRECATED ********* A table that contains information on all the  slots in this chassis.
.1.3.6.1.4.1.11.2.14.11.1.2.3.1,HP-ICF-CHASSIS::hpicfSlotEntry,,not-accessible,hpicfSlotIndex,deprecated,,********* THIS OBJECT IS DEPRECATED ********* Information about a slot in a chassis
.1.3.6.1.4.1.11.2.14.11.1.2.3.1.1,HP-ICF-CHASSIS::hpicfSlotIndex,Integer32,read-only,,deprecated,,********* THIS OBJECT IS DEPRECATED ********* The slot number within the box for which this  entry contains information.
.1.3.6.1.4.1.11.2.14.11.1.2.3.1.2,HP-ICF-CHASSIS::hpicfSlotObjectId,OBJECT,read-only,,deprecated,,********* THIS OBJECT IS DEPRECATED ********* The authoritative identification of the card  plugged into this slot in this chassis. A value  of { 0 0 } indicates an empty slot.
.1.3.6.1.4.1.11.2.14.11.1.2.3.1.3,HP-ICF-CHASSIS::hpicfSlotLastChange,TimeTicks,read-only,,deprecated,,********* THIS OBJECT IS DEPRECATED ********* The value of the agent's sysUpTime at which a  card in this slot was last inserted or removed.  If no module has been inserted or removed since  the last reinitialization of the agent, this  object has a zero value.
.1.3.6.1.4.1.11.2.14.11.1.2.3.1.4,HP-ICF-CHASSIS::hpicfSlotDescr,OCTET,read-only,,deprecated,,********* THIS OBJECT IS DEPRECATED ********* A textual description of the card plugged into  this slot in this chassis, including the product  number and version information.
.1.3.6.1.4.1.11.2.14.11.1.2.4,HP-ICF-CHASSIS::hpicfEntityTable,,not-accessible,,deprecated,,********* THIS OBJECT IS DEPRECATED ********* A table that contains information about the  (logical) networking devices contained in this chassis.
.1.3.6.1.4.1.11.2.14.11.1.2.4.1,HP-ICF-CHASSIS::hpicfEntityEntry,,not-accessible,hpicfEntityIndex,deprecated,,********* THIS OBJECT IS DEPRECATED ********* Information about a single logical networking  device contained in this chassis.
.1.3.6.1.4.1.11.2.14.11.1.2.4.1.1,HP-ICF-CHASSIS::hpicfEntityIndex,Integer32,read-only,,deprecated,,********* THIS OBJECT IS DEPRECATED ********* An index that uniquely identifies the logical  network device for which this entry contains  information.
.1.3.6.1.4.1.11.2.14.11.1.2.4.1.2,HP-ICF-CHASSIS::hpicfEntityFunction,Integer32,read-only,,deprecated,,********* THIS OBJECT IS DEPRECATED ********* The generic function provided by the logical  network device. The value is a sum. Starting  from zero, for each type of generic function that  the entity performs, 2 raised to a power is added  to the sum. The powers are according to the  following table: Function Power other 1 repeater 0 bridge 2 router 3 agent 5 For example, an entity performing both bridging  and routing functions would have a value of 12  (2^2 + 2^3).
.1.3.6.1.4.1.11.2.14.11.1.2.4.1.3,HP-ICF-CHASSIS::hpicfEntityObjectId,OBJECT,read-only,,deprecated,,********* THIS OBJECT IS DEPRECATED ********* The authoritative identification of the logical  network device which provides an unambiguous means of determining the type of device. The value of  this object is analogous to MIB-II's sysObjectId.
.1.3.6.1.4.1.11.2.14.11.1.2.4.1.4,HP-ICF-CHASSIS::hpicfEntityDescr,OCTET,read-only,,deprecated,,********* THIS OBJECT IS DEPRECATED ********* A textual description of this device, including  the product number and version information. The  value of this object is analogous to MIB-II's  sysDescr.
.1.3.6.1.4.1.11.2.14.11.1.2.4.1.5,HP-ICF-CHASSIS::hpicfEntityTimestamp,TimeTicks,read-only,,deprecated,,********* THIS OBJECT IS DEPRECATED ********* The value of the agent's sysUpTime at which this  logical network device was last reinitialized. If the entity has not been reinitialized since the  last reinitialization of the agent, then this  object has a zero value.
.1.3.6.1.4.1.11.2.14.11.1.2.5,HP-ICF-CHASSIS::hpicfSlotMapTable,,not-accessible,,deprecated,,********* THIS OBJECT IS DEPRECATED ********* A table that contains information about which  entities are in which slots in this chassis.
.1.3.6.1.4.1.11.2.14.11.1.2.5.1,HP-ICF-CHASSIS::hpicfSlotMapEntry,,not-accessible,hpicfSlotMapSlot:hpicfSlotMapEntity,deprecated,,********* THIS OBJECT IS DEPRECATED ********* A relationship between a slot and an entity in this chassis. Such a relationship exists if the  particular slot is occupied by a physical module  performing part of the function of the particular  entity.
.1.3.6.1.4.1.11.2.14.11.1.2.5.1.1,HP-ICF-CHASSIS::hpicfSlotMapSlot,Integer32,read-only,,deprecated,,********* THIS OBJECT IS DEPRECATED ********* A slot number within the chassis which contains  (part of) this entity.
.1.3.6.1.4.1.11.2.14.11.1.2.5.1.2,HP-ICF-CHASSIS::hpicfSlotMapEntity,Integer32,read-only,,deprecated,,********* THIS OBJECT IS DEPRECATED ********* The entity described in this mapping.
.1.3.6.1.4.1.11.2.14.11.1.2.6,HP-ICF-CHASSIS::hpicfSensorTable,,not-accessible,,current,,A table that contains information on all the sensors in this chassis
.1.3.6.1.4.1.11.2.14.11.1.2.6.1,HP-ICF-CHASSIS::hpicfSensorEntry,,not-accessible,hpicfSensorIndex,current,,Information about a sensor in a chassis
.1.3.6.1.4.1.11.2.14.11.1.2.6.1.1,HP-ICF-CHASSIS::hpicfSensorIndex,Integer32,read-only,,current,,An index that uniquely identifies the sensor for which this entry contains information.
.1.3.6.1.4.1.11.2.14.11.1.2.6.1.2,HP-ICF-CHASSIS::hpicfSensorObjectId,OBJECT,read-only,,current,,The authoritative identification of the kind of sensor this is.
.1.3.6.1.4.1.11.2.14.11.1.2.6.1.3,HP-ICF-CHASSIS::hpicfSensorNumber,Integer32,read-only,,current,,A number which identifies a particular sensor from other sensors of the same kind. For instance, if there are many temperature sensors in this chassis, this number would identify a particular temperature sensor in this chassis.
.1.3.6.1.4.1.11.2.14.11.1.2.6.1.4,HP-ICF-CHASSIS::hpicfSensorStatus,INTEGER,read-only,,current,unknown(1):bad(2):warning(3):good(4):notPresent(5),Actual status indicated by the sensor.
.1.3.6.1.4.1.11.2.14.11.1.2.6.1.5,HP-ICF-CHASSIS::hpicfSensorWarnings,Counter32,read-only,,current,,The number of times hpicfSensorStatus has entered the 'warning'(3) state.
.1.3.6.1.4.1.11.2.14.11.1.2.6.1.6,HP-ICF-CHASSIS::hpicfSensorFailures,Counter32,read-only,,current,,The number of times hpicfSensorStatus has entered the 'bad'(2) state.
.1.3.6.1.4.1.11.2.14.11.1.2.6.1.7,HP-ICF-CHASSIS::hpicfSensorDescr,OCTET,read-only,,current,,A textual description of the sensor.
.1.3.6.1.4.1.11.2.14.11.1.2.7,HP-ICF-CHASSIS::hpicfChassisAddrTable,,not-accessible,,deprecated,,********* THIS OBJECT IS DEPRECATED ********* A table of network addresses for entities in this chassis. The primary use of this table is to map a specific entity address to a specific chassis. Note that this table may not be a complete list of network addresses for this entity.
.1.3.6.1.4.1.11.2.14.11.1.2.7.1,HP-ICF-CHASSIS::hpicfChassisAddrEntry,,not-accessible,hpicfChasAddrType:hpicfChasAddrAddress,deprecated,,********* THIS OBJECT IS DEPRECATED ********* An entry containing a single network address being used by a logical network device in this chassis.
.1.3.6.1.4.1.11.2.14.11.1.2.7.1.1,HP-ICF-CHASSIS::hpicfChasAddrType,INTEGER,not-accessible,,deprecated,ipAddr(1):ipxAddr(2):macAddr(3),********* THIS OBJECT IS DEPRECATED ********* The kind of network address represented in this entry.
.1.3.6.1.4.1.11.2.14.11.1.2.7.1.2,HP-ICF-CHASSIS::hpicfChasAddrAddress,OCTET,not-accessible,,deprecated,,********* THIS OBJECT IS DEPRECATED ********* The network address being used by the logical network device associated with this entry, formatted according to the value of the associated instance of hpicfChasAddrType. For hpicfChasAddrType of ipAddr, this value is four octets long, with each octet representing one byte of the IP address, in network byte order. For hpicfChasAddrType of ipxAddr, this value is ten octets long, with the first four octets representing the IPX network number in network byte order, followed by the six byte host number in network byte order. For hpicfChasAddrType of macAddr, this value is six octets long, representing the MAC address in canonical order.
.1.3.6.1.4.1.11.2.14.11.1.2.7.1.3,HP-ICF-CHASSIS::hpicfChasAddrEntity,Integer32,read-only,,deprecated,,********* THIS OBJECT IS DEPRECATED ********* An index that uniquely identifies the logical  network device in this chassis that is using this network address..
.1.3.6.1.4.1.11.2.14.11.1.2.8,HP-ICF-CHASSIS::hpChassisTemperature,,,,,,
.1.3.6.1.4.1.11.2.14.11.1.2.8.1,HP-ICF-CHASSIS::hpSystemAirTempTable,,not-accessible,,current,,This table gives the temperature details of  chassis. These temperature details are  obtained by monitoring chassis temperature  sensors attached to the box by excluding ManagementModule, FabricModule, IMand  PowerSupply sensors. This will give current, maximum,minimum,threshold and average temperatures of chassis.
.1.3.6.1.4.1.11.2.14.11.1.2.8.1.1,HP-ICF-CHASSIS::hpSystemAirTempEntry,,not-accessible,hpSystemAirSensor,current,,This is the table for chassis temperature  details.
.1.3.6.1.4.1.11.2.14.11.1.2.8.1.1.1,HP-ICF-CHASSIS::hpSystemAirSensor,Integer32,not-accessible,,current,,This is the index for this table.This object  describes chassis attached temperature sensor. Based on the value of this index, temperature details are obtained from the sensor and are given.
.1.3.6.1.4.1.11.2.14.11.1.2.8.1.1.2,HP-ICF-CHASSIS::hpSystemAirName,OCTET,read-only,,current,,This object describes name of the system which is chassis attached temperature sensor number. For example if the index  (hpSystemAirSensor) is '0' then the system  name is sys-1. Index starts from '0' but sensor number is '1'.
.1.3.6.1.4.1.11.2.14.11.1.2.8.1.1.3,HP-ICF-CHASSIS::hpSystemAirCurrentTemp,OCTET,read-only,,current,,This object gives current temperature of the system. This is the current temperature given by the indexed chassis attached temperature sensor on box.
.1.3.6.1.4.1.11.2.14.11.1.2.8.1.1.4,HP-ICF-CHASSIS::hpSystemAirMaxTemp,OCTET,read-only,,current,,This object gives Maximum temperature of the  chassis.
.1.3.6.1.4.1.11.2.14.11.1.2.8.1.1.5,HP-ICF-CHASSIS::hpSystemAirMinTemp,OCTET,read-only,,current,,This object gives Minimum temperature of the chassis.
.1.3.6.1.4.1.11.2.14.11.1.2.8.1.1.6,HP-ICF-CHASSIS::hpSystemAirOverTemp,INTEGER,read-only,,current,yes(1):no(2),This object gives Over temperature of the system. If the current temperature of the board is above threshold temperature and if  board stays at this temperature for 10 full seconds then its called over temperature.
.1.3.6.1.4.1.11.2.14.11.1.2.8.1.1.7,HP-ICF-CHASSIS::hpSystemAirThresholdTemp,OCTET,read-only,,current,,This object gives Threshold temperature of  the system. This is the utmost temperature  that the chassis can sustain. If chassis  temperature is above threshold then alarm will ring to inform over temperature condition.
.1.3.6.1.4.1.11.2.14.11.1.2.8.1.1.8,HP-ICF-CHASSIS::hpSystemAirAvgTemp,OCTET,read-only,,current,,This object gives Average temperature of the system. There will be some roll up function which will check current temperature at  particular intervals. Based on these current  temperatures over certain time, average  temperature is calculated.
.1.3.6.1.4.1.11.2.14.11.1.2.8.1.1.9,HP-ICF-CHASSIS::hpSystemAirEntPhysicalIndex,Integer32,read-only,,current,,This gives the entPhysicalIndex of the temperature sensor as in the entPhysicalTable (rfc2737).
.1.3.6.1.4.1.11.2.14.11.1.2.9,HP-ICF-CHASSIS::hpicfFanTrayType,INTEGER,read-only,,current,standard(1):highPerformance(2),If opacity shield is installed hpicsFanTrayType  should be HighPerformance. This is applicable  only for 5406 5412 8212 and 8206 Switches.
.1.3.6.1.4.1.11.2.14.11.1.2.10,HP-ICF-CHASSIS::hpicfOpacityShieldInstalled,INTEGER,read-only,,current,true(1):false(2),It indicates that Opacity shield is Installed on  the switch. This is applicable only for 5406,5412, 8212 and 8206 Switches.
.1.3.6.1.4.1.11.2.14.11.1.3,HP-ICF-OID::hpicfDownload,,,,,,
.1.3.6.1.4.1.11.2.14.11.1.3.1,HP-ICF-DOWNLOAD::hpicfDownloadTable,,not-accessible,,deprecated,,A table of firmware downloads to this device.  There will at any time be either 0 or 1 rows in  this table, and the only valid index for this  table is 1. It is only a table so that we may  take advantage of the RowStatus textual convention for configuring the download parameters. Since this table does not support IPv6, it is deprecated in favor of hpicfDownloadInetTable.
.1.3.6.1.4.1.11.2.14.11.1.3.1.1,HP-ICF-DOWNLOAD::hpicfDownloadEntry,,not-accessible,hpicfDownloadIndex,deprecated,,The row in the hpicfDownloadTable containing the  download parameters. Since this table does not support IPv6, it is deprecated in favor of hpicfDownloadInetEntry.
.1.3.6.1.4.1.11.2.14.11.1.3.1.1.1,HP-ICF-DOWNLOAD::hpicfDownloadIndex,INTEGER,read-only,,deprecated,dlInstance(1),The index which uniquely identifies this row.  The only legal value for this object is 1.
.1.3.6.1.4.1.11.2.14.11.1.3.1.1.2,HP-ICF-DOWNLOAD::hpicfDownloadOwnerAddress,OCTET,read-only,,deprecated,,The transport address of the management station  that initiated this download attempt, formatted  according to the value of the associated instance  of hpicfDownloadOwnerDomain.
.1.3.6.1.4.1.11.2.14.11.1.3.1.1.3,HP-ICF-DOWNLOAD::hpicfDownloadOwnerDomain,OBJECT,read-only,,deprecated,,The kind of transport service used by the  management station that initiated this download  attempt.
.1.3.6.1.4.1.11.2.14.11.1.3.1.1.4,HP-ICF-DOWNLOAD::hpicfDownloadTAddress,OCTET,read-create,,deprecated,,The transport address of the node to download  firmware from, formatted according to the value of the associated instance of hpicfDownloadTDomain. An attempt to modify this value will fail if the  associated hpicfDownloadStatus object would be  equal to 'active' both before and after the  modification attempt.
.1.3.6.1.4.1.11.2.14.11.1.3.1.1.5,HP-ICF-DOWNLOAD::hpicfDownloadTDomain,OBJECT,read-create,,deprecated,,The kind of transport service to be used for the  download. Currently supports snmpUDPDomain and  snmpIPXDomain. An attempt to modify this value will fail if the  associated hpicfDownloadStatus object would be  equal to 'active' both before and after the  modification attempt.
.1.3.6.1.4.1.11.2.14.11.1.3.1.1.6,HP-ICF-DOWNLOAD::hpicfDownloadFilename,OCTET,read-create,,deprecated,,Filename and path of file to download (maximum  length of 63 characters + NULL). An attempt to modify this value will fail if the  associated hpicfDownloadStatus object would be  equal to 'active' both before and after the  modification attempt.
.1.3.6.1.4.1.11.2.14.11.1.3.1.1.7,HP-ICF-DOWNLOAD::hpicfDownloadResetType,INTEGER,read-create,,deprecated,noReset(1):warmReset(2):factoryReset(3),The type of reset to perform after completion of the firmware download. Note that not all agents will support all possible values, and there may be other agent-specific values for this object.
.1.3.6.1.4.1.11.2.14.11.1.3.1.1.8,HP-ICF-DOWNLOAD::hpicfDownloadErrorStatus,INTEGER,read-only,,deprecated,fileNotFound(1):accessViolation(2):diskFull(3):illegalOperation(4):unknownTID(5):fileExists(6):noSuchUser(7):notDefined(8):corruptFile(9):noServer(10):tftpTimeout(11):hardwareError(12):success(13):aborted(14):inProgress(15):idle(16):erasingEeprom(17):incompleteFirmware(18):requirePowerCycle(19):cannotUpgrade(20):cannotDowngrade(21),Status of download. The first seven codes are  equal to the codes defined by the TFTP protocol. 'notDefined' is the same as TFTP protocol error 0. The following are the other possible values for this object: corruptFile - the agent detected a problem with the download file format. noServer - the TFTP server at hpicfDownloadTAddress did not respond to the TFTP request. tftpTimeout - the download was aborted due to excessive timeouts.  hardwareError - there was a hardware problem on the agent that forced an abort of the download (see hpicfDownloadErrorText for more detailed information). success - the download has completed successfully. aborted - the download was aborted by setting the hpicfDownloadStatus to 'notInService' or 'delete'. inProgress - the TFTP transfer is currently active. idle - means that the download has not yet started (i.e. the value of hpicfDownloadStatus has not yet been set to 'active'). erasingEeprom - the agent is currently erasing the EEPROM device. Currently only used on JetDirect agents. incompleteFirmware - the agent is running an incomplete version of firmware and requires a download. Currently only used on JetDirect agents. requirePowerCycle - the agent must be power cycled to run the newly downloaded firmware. Currently only used on JetDirect agents. cannotUpgrade - the agent's current firmware revision cannot be upgraded to the revision in the download file. cannotDowngrade - the agent's current firmware revision cannot be downgraded to the revision in the download file.
.1.3.6.1.4.1.11.2.14.11.1.3.1.1.9,HP-ICF-DOWNLOAD::hpicfDownloadErrorText,OCTET,read-only,,deprecated,,A textual description of the current error status of the firmware download.
.1.3.6.1.4.1.11.2.14.11.1.3.1.1.10,HP-ICF-DOWNLOAD::hpicfDownloadStatus,INTEGER,read-create,,deprecated,active(1):notInService(2):notReady(3):createAndGo(4):createAndWait(5):destroy(6),The status of this download entry. This object may not be set to 'active' unless the following  columnar objects exist in this row:  hpicfDownloadTAddress, hpicfDownloadTDomain, hpicfDownloadFilename, and  hpicfDownloadResetType.
.1.3.6.1.4.1.11.2.14.11.1.3.1.1.11,HP-ICF-DOWNLOAD::hpicfDownloadPassesLeft,Integer32,read-only,,deprecated,,The number of passes remaining in the current download attempt. Some agents (currently JetDirect agents) require multiple passes through the download file in order to download a firmware image. This object indicates the number of passes remaining, including the current pass. The object is initialized by the agent to the number of passes required to complete the download when the corresponding instance of hpicfDownloadStatus is set to 'active'. It is decremented by one each time a pass completes.
.1.3.6.1.4.1.11.2.14.11.1.3.1.1.12,HP-ICF-DOWNLOAD::hpicfDownloadOctetCount,Integer32,read-only,,deprecated,,The number of octets that have been transferred during the current pass. This object is initialized to zero by the agent when the corresponding instance of hpicfDownloadStatus is set to 'active', and reinitialized to zero at the beginning of each pass.
.1.3.6.1.4.1.11.2.14.11.1.3.1.1.13,HP-ICF-DOWNLOAD::hpicfDownloadDestination,OCTET,read-create,,deprecated,,The destination of the download file on the agent. The allowable destination names depend on the type of agent being downloaded. In all cases, a destination of '/os/primary' or '/os/secondary' indicates that this is a download of the agent's firmware image. The agent will use '/os/primary'  as the default value for this object when the row is created.  ICF router agents also allow a download of a config file. Currently, the name of the config file on the agent is '/config'. An agent should reject an attempt to set this object to a destination name that does not make sense for this type of agent.
.1.3.6.1.4.1.11.2.14.11.1.3.2,HP-ICF-DOWNLOAD::hpicfDownloadLogMaxSize,Integer32,read-only,,current,,The maximum number of the download log entries supported by this agent. Note that 0 is a  legal value for this variable.
.1.3.6.1.4.1.11.2.14.11.1.3.3,HP-ICF-DOWNLOAD::hpicfDownloadLogSize,Gauge32,read-only,,current,,The number of download log entries currently in the hpicfDownloadLogTable.
.1.3.6.1.4.1.11.2.14.11.1.3.4,HP-ICF-DOWNLOAD::hpicfDownloadLogTable,,not-accessible,,current,,A log of the hpicfDownloadSize most recent  download attempts to this device. The first entry in the table is the oldest.
.1.3.6.1.4.1.11.2.14.11.1.3.4.1,HP-ICF-DOWNLOAD::hpicfDownloadLogEntry,,not-accessible,hpicfDlLogIndex,current,,An entry in the hpicfDownloadLogTable containing information about a single download attempt.
.1.3.6.1.4.1.11.2.14.11.1.3.4.1.1,HP-ICF-DOWNLOAD::hpicfDlLogIndex,Integer32,read-only,,current,,The index of this entry in the download log  table. Index 1 will always contain the oldest entry. If the table is full when a download attempt is made, the new entry becomes the last entry (hpicfDownloadLogMaxSize), and all earlier entries are shifted down by one entry, removing the old index 1.
.1.3.6.1.4.1.11.2.14.11.1.3.4.1.2,HP-ICF-DOWNLOAD::hpicfDlLogOwnerAddress,OCTET,read-only,,current,,The transport address of the management station  that attempted to initiate a download of this device, formatted according to the value of  hpicfDlLastOwnerDomain.
.1.3.6.1.4.1.11.2.14.11.1.3.4.1.3,HP-ICF-DOWNLOAD::hpicfDlLogOwnerDomain,OBJECT,read-only,,current,,The kind of transport service used by the  management station that attempted to initiate a  download of this device.
.1.3.6.1.4.1.11.2.14.11.1.3.4.1.4,HP-ICF-DOWNLOAD::hpicfDlLogTAddress,OCTET,read-only,,current,,The transport address of the node from which this device attempted to download firmware, formatted  according to the value of hpicfDlLastTDomain.
.1.3.6.1.4.1.11.2.14.11.1.3.4.1.5,HP-ICF-DOWNLOAD::hpicfDlLogTDomain,OBJECT,read-only,,current,,The kind of transport service which was used for  the attempt to download firmware to this device.
.1.3.6.1.4.1.11.2.14.11.1.3.4.1.6,HP-ICF-DOWNLOAD::hpicfDlLogFilename,OCTET,read-only,,current,,The filename from which this device attempted to download firmware.
.1.3.6.1.4.1.11.2.14.11.1.3.4.1.7,HP-ICF-DOWNLOAD::hpicfDlLogResetType,INTEGER,read-only,,current,noReset(1):warmReset(2):factoryReset(3),The type of reset requested to be performed after completion of the firmware download  attempt.
.1.3.6.1.4.1.11.2.14.11.1.3.4.1.8,HP-ICF-DOWNLOAD::hpicfDlLogErrorStatus,INTEGER,read-only,,current,fileNotFound(1):accessViolation(2):diskFull(3):illegalOperation(4):unknownTID(5):fileExists(6):noSuchUser(7):notDefined(8):corruptFile(9):noServer(10):tftpTimeout(11):hardwareError(12):success(13):aborted(14),The result of the attempt to download firmware to this device. The values are the same as the  corresponding values of hpicfDownloadErrorStatus.
.1.3.6.1.4.1.11.2.14.11.1.3.4.1.9,HP-ICF-DOWNLOAD::hpicfDlLogErrorText,OCTET,read-only,,current,,A textual description of the final error status  of the attempt to download firmware to this  device.
.1.3.6.1.4.1.11.2.14.11.1.3.5,HP-ICF-DOWNLOAD::hpicfDownloadTftpConfig,INTEGER,read-write,,deprecated,disabled(1):enabled(2),This object allows switch to enable or disable tftp. Default value is 2. Cannot be enabled if sftp is enabled.
.1.3.6.1.4.1.11.2.14.11.1.3.6,HP-ICF-DOWNLOAD::hpicfDownloadTftpServerConfig,INTEGER,read-write,,current,true(1):false(2),When this is true(1), the TFTP server is enabled and will process incoming requests. When this is  false(2), the TFTP server will be shut down and  will not accept incoming connections.
.1.3.6.1.4.1.11.2.14.11.1.3.7,HP-ICF-DOWNLOAD::hpicfDownloadTftp6Config,INTEGER,read-write,,deprecated,disabled(1):enabled(2),********* THIS OBJECT IS DEPRECATED ******** This object allows switch to enable or disable tftp. Default value is 2. Cannot be enabled if sftp is enabled.
.1.3.6.1.4.1.11.2.14.11.1.3.8,HP-ICF-DOWNLOAD::hpicfDownloadTftp6ServerConfig,INTEGER,read-write,,deprecated,true(1):false(2),********* THIS OBJECT IS DEPRECATED ******** When this is true(1), the TFTP server is enabled and will process incoming requests. When this is  false(2), the TFTP server will be shut down and  will not accept incoming connections.
.1.3.6.1.4.1.11.2.14.11.1.3.9,HP-ICF-DOWNLOAD::hpicfDownloadInetTable,,not-accessible,,current,,A table of firmware downloads to this device.  There will at any time be either 0 or 1 rows in  this table, and the only valid index for this  table is 1. It is only a table so that we may  take advantage of the RowStatus textual convention for configuring the download parameters.
.1.3.6.1.4.1.11.2.14.11.1.3.9.1,HP-ICF-DOWNLOAD::hpicfDownloadInetEntry,,not-accessible,hpicfDownloadInetIndex,current,,The row in the hpicfDownloadInetTable containing the download parameters.
.1.3.6.1.4.1.11.2.14.11.1.3.9.1.1,HP-ICF-DOWNLOAD::hpicfDownloadInetIndex,Integer32,read-only,,current,,The index which uniquely identifies this row.
.1.3.6.1.4.1.11.2.14.11.1.3.9.1.2,HP-ICF-DOWNLOAD::hpicfDownloadInetTAddressType,INTEGER,read-write,,current,unknown(0):ipv4(1):ipv6(2):ipv4z(3):ipv6z(4):dns(16),The type of address in the corresponding hpicfDownloadTAddress object. An attempt to  modify this value will fail if the associated  hpicfDownloadInetStatus object would be equal to 'active' both before and after the modification attempt.
.1.3.6.1.4.1.11.2.14.11.1.3.9.1.3,HP-ICF-DOWNLOAD::hpicfDownloadInetTAddress,OCTET,read-create,,current,,The transport address of the node to download  firmware from, formatted according to the value of the associated instance of hpicfDownloadInetTAddressType. An attempt to modify this value will fail if the  associated hpicfDownloadInetStatus object would be  equal to 'active' both before and after the  modification attempt.
.1.3.6.1.4.1.11.2.14.11.1.3.9.1.4,HP-ICF-DOWNLOAD::hpicfDownloadInetFilename,OCTET,read-create,,current,,Filename and path of file to download (maximum  length of 63 characters + NULL). An attempt to modify this value will fail if the  associated hpicfDownloadInetStatus object would be  equal to 'active' both before and after the  modification attempt.
.1.3.6.1.4.1.11.2.14.11.1.3.9.1.5,HP-ICF-DOWNLOAD::hpicfDownloadInetOwnerAddressType,INTEGER,read-write,,current,unknown(0):ipv4(1):ipv6(2):ipv4z(3):ipv6z(4):dns(16),The type of address in the corresponding hpicfDownloadInetOwnerAddress object.
.1.3.6.1.4.1.11.2.14.11.1.3.9.1.6,HP-ICF-DOWNLOAD::hpicfDownloadInetOwnerAddress,OCTET,read-only,,current,,The transport address of the management station  that initiated this download attempt, formatted  according to the value of the associated instance  of hpicfDownloadInetOwnerAddressType.
.1.3.6.1.4.1.11.2.14.11.1.3.9.1.7,HP-ICF-DOWNLOAD::hpicfDownloadInetSourcePort,Integer32,read-write,,current,,The port of the management station  that initiated this download attempt.
.1.3.6.1.4.1.11.2.14.11.1.3.9.1.8,HP-ICF-DOWNLOAD::hpicfDownloadInetDestinationPort,Integer32,read-write,,current,,The port of the management station  that initiated this download attempt.
.1.3.6.1.4.1.11.2.14.11.1.3.9.1.9,HP-ICF-DOWNLOAD::hpicfDownloadInetFileTransferType,INTEGER,read-write,,current,usb(1):tftp(2):xmodem(3),The FileTransfer Method used by the management station to initiate the download attempt.
.1.3.6.1.4.1.11.2.14.11.1.3.9.1.10,HP-ICF-DOWNLOAD::hpicfDownloadInetResetType,INTEGER,read-create,,current,noReset(1):warmReset(2):factoryReset(3),The type of reset to perform after completion of the firmware download. Note that not all agents will support all possible values, and there may be other agent-specific values for this object.
.1.3.6.1.4.1.11.2.14.11.1.3.9.1.11,HP-ICF-DOWNLOAD::hpicfDownloadInetErrorStatus,INTEGER,read-only,,current,fileNotFound(1):accessViolation(2):diskFull(3):illegalOperation(4):unknownTID(5):fileExists(6):noSuchUser(7):notDefined(8):corruptFile(9):noServer(10):tftpTimeout(11):hardwareError(12):success(13):aborted(14):inProgress(15):idle(16):erasingEeprom(17):incompleteFirmware(18):requirePowerCycle(19):cannotUpgrade(20):cannotDowngrade(21),Status of download. The first seven codes are  equal to the codes defined by the TFTP protocol. 'notDefined' is the same as TFTP protocol error 0. The following are the other possible values for this object: corruptFile - the agent detected a problem with the download file format. noServer - the TFTP server at hpicfDownloadTAddress did not respond to the TFTP request. tftpTimeout - the download was aborted due to excessive timeouts.  hardwareError - there was a hardware problem on the agent that forced an abort of the download (see hpicfDownloadErrorText for more detailed information). success - the download has completed successfully. aborted - the download was aborted by setting the hpicfDownloadStatus to 'notInService' or 'delete'. inProgress - the TFTP transfer is currently active. idle - means that the download has not yet started (i.e. the value of hpicfDownloadStatus has not yet been set to 'active'). erasingEeprom - the agent is currently erasing the EEPROM device. Currently only used on JetDirect agents. incompleteFirmware - the agent is running an incomplete version of firmware and requires a download. Currently only used on JetDirect agents. requirePowerCycle - the agent must be power cycled to run the newly downloaded firmware. Currently only used on JetDirect agents. cannotUpgrade - the agent's current firmware revision cannot be upgraded to the revision in the download file. cannotDowngrade - the agent's current firmware revision cannot be downgraded to the revision in the download file.
.1.3.6.1.4.1.11.2.14.11.1.3.9.1.12,HP-ICF-DOWNLOAD::hpicfDownloadInetErrorText,OCTET,read-only,,current,,A textual description of the current error status of the firmware download.
.1.3.6.1.4.1.11.2.14.11.1.3.9.1.13,HP-ICF-DOWNLOAD::hpicfDownloadInetStatus,INTEGER,read-create,,current,active(1):notInService(2):notReady(3):createAndGo(4):createAndWait(5):destroy(6),The status of this download entry. This object may not be set to 'active' unless the following  columnar objects exist in this row:  hpicfDownloadInetTAddress, hpicfDownloadInetTAddressType, hpicfDownloadInetFilename, and  hpicfDownloadInetResetType.
.1.3.6.1.4.1.11.2.14.11.1.3.9.1.14,HP-ICF-DOWNLOAD::hpicfDownloadInetPassesLeft,Integer32,read-only,,current,,The number of passes remaining in the current download attempt. Some agents (currently JetDirect agents) require multiple passes through the download file in order to download a firmware image. This object indicates the number of passes remaining, including the current pass. The object is initialized by the agent to the number of passes required to complete the download when the corresponding instance of hpicfDownloadStatus is set to 'active'. It is decremented by one each time a pass completes.
.1.3.6.1.4.1.11.2.14.11.1.3.9.1.15,HP-ICF-DOWNLOAD::hpicfDownloadInetOctetCount,Integer32,read-only,,current,,The number of octets that have been transferred during the current pass. This object is initialized to zero by the agent when the corresponding instance of hpicfDownloadStatus is set to 'active', and reinitialized to zero at the beginning of each pass.
.1.3.6.1.4.1.11.2.14.11.1.3.9.1.16,HP-ICF-DOWNLOAD::hpicfDownloadInetDestination,OCTET,read-create,,current,,The destination of the download file on the agent. The allowable destination names depend on the type of agent being downloaded.  In case of firmware download,destination can be '/os/primary' or '/os/secondary' The agent will use '/os/primary' as the default  value for this object when the row is created. In case of downloading a config file, this object is set to the name of the config file on the switch to where it should be downloaded. In case of downloading the startup config, this object is nullified as it is not used. ICF router agents also allow a download of a config file. Currently, the name of the config file on the agent is '/config'. If the hpicfDownloadInetOpType is set to ftget,  an agent should reject an attempt to set this object to a destination name that does not make sense for this type of agent. If hpicfDownloadInetOpType is ftput this can be set  to a filename present in the tftp server.
.1.3.6.1.4.1.11.2.14.11.1.3.9.1.17,HP-ICF-DOWNLOAD::hpicfDownloadInetOpType,INTEGER,read-write,,current,ftget(1):ftput(2),The OpType which is used for Getting or Putting firmware, coreDump and config from/to the TFTP  server.
.1.3.6.1.4.1.11.2.14.11.1.3.9.1.18,HP-ICF-DOWNLOAD::hpicfDownloadInetFileType,INTEGER,read-create,,current,flash(1):startUpConfig(2):runningConfig(3):config(4):coreDump(5),The FileType used by the management station to initiate the upload/download attempt. OpType-ftput is not supported for flash. OpType-ftget is not supported for  runningConfig and coreDump
.1.3.6.1.4.1.11.2.14.11.1.3.9.1.19,HP-ICF-DOWNLOAD::hpicfDownloadInetFileModeType,INTEGER,read-create,,current,unix(1):pc(2),The FileModeType used by the management station to initiate the download attempt.
.1.3.6.1.4.1.11.2.14.11.1.3.9.1.20,HP-ICF-DOWNLOAD::hpicfDownloadInetCoreDumpModule,Integer32,read-create,,current,,This object can be updated if the  hpicfDownloadInetFileType is set to coreDump.  Valid entPhysicalIndex for this object are management-modules and interface-modules.
.1.3.6.1.4.1.11.2.14.11.1.3.10,HP-ICF-DOWNLOAD::hpicfDownloadConfigFileUpdateEnabled,INTEGER,read-write,,current,true(1):false(2),This object facilitates enabling/disabling configuration file update through DHCP. By default, this is enabled.
.1.3.6.1.4.1.11.2.14.11.1.3.11,HP-ICF-DOWNLOAD::hpicfDownloadAutoTftpTable,,not-accessible,,current,,A table for automatic firmware download to the device via TFTP during boot. The firmware image will be downloaded if it has a different version from the firmware running on the switch.  There will be only one row at any time for this  table, and the only valid index for this  table is 1.
.1.3.6.1.4.1.11.2.14.11.1.3.11.1,HP-ICF-DOWNLOAD::hpicfDownloadAutoTftpEntry,,not-accessible,hpicfDownloadAutoTftpIndex,current,,The row in the hpicfDownloadAutoTftpTable containing the auto-tftp download parameters.
.1.3.6.1.4.1.11.2.14.11.1.3.11.1.1,HP-ICF-DOWNLOAD::hpicfDownloadAutoTftpIndex,Integer32,not-accessible,,current,,The index which uniquely identifies this row.
.1.3.6.1.4.1.11.2.14.11.1.3.11.1.2,HP-ICF-DOWNLOAD::hpicfDownloadAutoTftpAddressType,INTEGER,read-write,,current,unknown(0):ipv4(1):ipv6(2):ipv4z(3):ipv6z(4):dns(16),The type of address in the corresponding hpicfDownloadAutoTftpAddress object.
.1.3.6.1.4.1.11.2.14.11.1.3.11.1.3,HP-ICF-DOWNLOAD::hpicfDownloadAutoTftpAddress,OCTET,read-write,,current,,The tftp server address to download firmware from, formatted according to the value of the associated instance of hpicfDownloadAutoTftpAddressType.
.1.3.6.1.4.1.11.2.14.11.1.3.11.1.4,HP-ICF-DOWNLOAD::hpicfDownloadAutoTftpRemoteFilename,OCTET,read-write,,current,,The firmware image name to download from tftp-server. It can be upto 255 characters.
.1.3.6.1.4.1.11.2.14.11.1.3.11.1.5,HP-ICF-DOWNLOAD::hpicfDownloadAutoTftpAdminStatus,INTEGER,read-write,,current,enable(1):disable(2),This object enables/disables auto-tftp. The value of hpicfDownloadAutoTftpAddress,  hpicfDownloadAutoTftpRemoteFilename can not be empty when hpicfDownloadAutoTftpAdminStatus is enabled.
.1.3.6.1.4.1.11.2.14.11.1.3.12,HP-ICF-DOWNLOAD::hpicfDownloadTftpClientConfig,INTEGER,read-write,,current,enabled(1):disabled(2),This object enables or disables the TFTP client on the switch.  The TFTP client is disabled when SFTP and SCP file transfer  modes are enabled. A value of (1) indicates that TFTP client is enabled on the switch. A value of (2) indicates that TFTP client is disabled on the switch.
.1.3.6.1.4.1.11.2.14.11.1.3.13,HP-ICF-DOWNLOAD::hpicfDownloadTftpClientBlkSize,Integer32,read-write,,current,,The size of the TFTP Client block size in bytes. This value can be set only when hpicfDownloadTftpClientConfig is enabled. When hpicfDownloadTftpClientConfig is disabled, this value is reset to its default value. The actual range of the supported block size depends  on the implementation.
.1.3.6.1.4.1.11.2.14.11.1.4,HP-ICF-OID::hpicfBasic,,,,,,
.1.3.6.1.4.1.11.2.14.11.1.4.1,HP-ICF-BASIC::hpicfReset,INTEGER,read-write,,current,noReset(1):normalReset(2):agentReset(4),When this object is set to 'normalReset' it results in a 'powerup' reset of the device. When set to 'agentReset', it results in a reset of the agent software, without resetting the device hardware. When this object is set, the agent replies, dallies a short time to allow the reply to be emitted from the device, then performs the reset. When read, this object always returns  'noReset'.
.1.3.6.1.4.1.11.2.14.11.1.4.2,HP-ICF-BASIC::hpicfSelfTest,INTEGER,read-write,,current,stSuccess(1):stExecute(2),Self test is invoked by setting this flag to  'stExecute'. When the object changes to 'stSuccess', the test has completed successfully.
.1.3.6.1.4.1.11.2.14.11.1.4.3,HP-ICF-BASIC::hpicfTelnetEnable,INTEGER,read-write,,current,enabled(1):disabled(2),When the value of this object is 'enabled(1)', the telnet server on this agent is running and allowed to accept connections. When the value of this object is 'disabled(2)', no incoming telnet connections will be accepted by this agent. Whether the telnet server continues running when this object is set to 'disabled(2)' is implementation dependent.
.1.3.6.1.4.1.11.2.14.11.1.4.4,HP-ICF-BASIC::hpicfConfigClear,INTEGER,read-write,,current,running(1):configClear(2),When this object is set to 'configClear', the agent replies, dallies a short time to allow the reply to be emitted from the device, clears all of its nonvolitile parameters back to their factory defaults then resets the device. Note that this will result in all parameters being cleared, including network configuration. This function should be used with extreme caution. When read, this object always returns 'running'.
.1.3.6.1.4.1.11.2.14.11.1.4.5,HP-ICF-BASIC::hpicfSelfTestResult,,,,,,
.1.3.6.1.4.1.11.2.14.11.1.4.5.1,HP-ICF-BASIC::hpicfSelfTestResultCode,INTEGER,read-only,,current,ok(1):softFailure(2),If the value of this object is 'softFailure', the agent is up and running, but has detected a non-critical failure. The value of the hpicfSelfTestResultText will contain further information about the type of failure that was detected and may contain information about how to remedy the situation.
.1.3.6.1.4.1.11.2.14.11.1.4.5.2,HP-ICF-BASIC::hpicfSelfTestResultText,OCTET,read-only,,current,,If the value of the hpicfSelfTestResultCode object is 'softFailure', this text string contains detailed information about the most recently detected failure, including information about the type of failure that was detected, and possibly information about how to remedy the situation. If the value of the hpicfSelfTestResultCode object is 'ok', this object will contain a zero-length octet string.
.1.3.6.1.4.1.11.2.14.11.1.4.5.3,HP-ICF-BASIC::hpicfSelfTestResultTime,TimeTicks,read-only,,current,,This object contains the value of sysUpTime at the time the agent detected the failure currently being reported by hpicfSelfTestResultCode and hpicfSelfTestResultText. If the value of the hpicfSelfTestResultCode is 'ok', or if the current failure was detected before the SNMP agent initialized, this object will have the value 0.
.1.3.6.1.4.1.11.2.14.11.1.4.6,HP-ICF-BASIC::hpicfWebAgentEnable,INTEGER,read-write,,current,enabled(1):disabled(2),When the value of this object is 'enabled(1)', the ehttpd server on this agent is running and allowed to accept connections. When the value of this object is 'disabled(2)', no incoming ehttpd connections will be accepted by this agent. Whether the ehttpd server continues running when this object is set to 'disabled(2)' is implementation dependent.
.1.3.6.1.4.1.11.2.14.11.1.4.7,HP-ICF-BASIC::hpicfBasicDiscovery,,,,,,
.1.3.6.1.4.1.11.2.14.11.1.4.7.1,HP-ICF-BASIC::hpicfAnnounceTable,,not-accessible,,deprecated,,********* THIS OBJECT IS DEPRECATED ********* A table of per-device network announcement addresses. This table is used to cause the transmission of announcement packets for a particular logical device to a specified address. This is used as part of topology mapping to determine the network connectivity of a device on the network.
.1.3.6.1.4.1.11.2.14.11.1.4.7.1.1,HP-ICF-BASIC::hpicfAnnounceEntry,,not-accessible,entLogicalIndex,deprecated,,********* THIS OBJECT IS DEPRECATED ********* A row in the table, containing the announcement address for a single entity.
.1.3.6.1.4.1.11.2.14.11.1.4.7.1.1.1,HP-ICF-BASIC::hpicfAnnounceAddress,OCTET,read-write,,deprecated,,********* THIS OBJECT IS DEPRECATED ********* Seting an instance of this object to any MAC address will trigger the agent to transmit three announcement packets on an interface associated with the logical entity. These packets will use a MAC source address set to the agent's MAC address on that interface, a MAC destination address equal to the value of the instance of this object, a destination LSAP of 0xF8, and a destination HP XSAP of 0x165d.
.1.3.6.1.4.1.11.2.14.11.1.4.7.2,HP-ICF-BASIC::hpicfIfToEntityTable,,not-accessible,,deprecated,,********* THIS OBJECT IS DEPRECATED ********* This table is used to map an interface index to a logical entity index. This table is mainly used by autodiscovery to figure out which entLogicalIndex corresponds to a particular network address. This table is not intended as a general purpose mapping. In particular, in some systems the same interface can be in use by multiple logical entities. Also, there is no requirement that ifIndex is unique across all logical entities (such as the case where multiple agents in the same chassis each assign ifIndex without knowledge of how the other agents are assigning ifIndex). Therefore, these mappings are only defined to hold for the special purpose of getting from the discovered transport address for a logical device to the entLogicalIndex needed for announce address and search address. Also, note that this table will not contain entries for all of the values of ifIndex. It will only contain entries for interfaces that can be used for sending announcement packets for some logical entity.
.1.3.6.1.4.1.11.2.14.11.1.4.7.2.1,HP-ICF-BASIC::hpicfIfToEntityEntry,,not-accessible,ifIndex,deprecated,,********* THIS OBJECT IS DEPRECATED ********* A row in the table, containing the ifIndex to entLogicalIndex mapping for a single interface.
.1.3.6.1.4.1.11.2.14.11.1.4.7.2.1.1,HP-ICF-BASIC::hpicfIfEntLogicalIndex,Integer32,read-only,,deprecated,,********* THIS OBJECT IS DEPRECATED ********* This object identifies the entLogicalIndex of a device that can be mapped using this interface. An entLogicalEntry identified by a value of an instance of this object is the same entry identified by the same value of an instance of entLogicalIndex.
.1.3.6.1.4.1.11.2.14.11.1.4.7.3,HP-ICF-BASIC::hpicfAnnounceDiscoveryTable,,not-accessible,,current,,A table of per-device network announcement addresses. This table is used to cause the transmission of announcement packets for a particular logical device to a specified address. This is used as part of topology mapping to determine the network connectivity of a device on the network.
.1.3.6.1.4.1.11.2.14.11.1.4.7.3.1,HP-ICF-BASIC::hpicfAnnounceDiscoveryEntry,,not-accessible,ifIndex,current,,A row in the table, containing the announcement address for a single entity.
.1.3.6.1.4.1.11.2.14.11.1.4.7.3.1.1,HP-ICF-BASIC::hpicfAnnounceDiscoveryAddress,OCTET,read-write,,current,,Seting an instance of this object to any MAC address will trigger the agent to transmit three announcement packets on an interface associated with the logical entity. These packets will use a MAC source address set to the agent's MAC address on that interface, a MAC destination address equal to the value of the instance of this object, a destination LSAP of 0xF8, and a destination HP XSAP of 0x165d.
.1.3.6.1.4.1.11.2.14.11.1.4.8,HP-ICF-BASIC::hpicfBasicIpConfig,,,,,,
.1.3.6.1.4.1.11.2.14.11.1.4.8.1,HP-ICF-BASIC::hpicfIpConfigTable,,not-accessible,,deprecated,,********* THIS OBJECT IS DEPRECATED ********* This table contains per-interface IP configuration information.
.1.3.6.1.4.1.11.2.14.11.1.4.8.1.1,HP-ICF-BASIC::hpicfIpConfigEntry,,not-accessible,ifIndex,deprecated,,********* THIS OBJECT IS DEPRECATED ********* An entry in the hpicfIpConfigTable containing the IP configuration information for a single interface.
.1.3.6.1.4.1.11.2.14.11.1.4.8.1.1.1,HP-ICF-BASIC::hpicfIpConfigAddress,IpAddress,read-write,,deprecated,,********* THIS OBJECT IS DEPRECATED ********* This variable contains the IP address for this interface.
.1.3.6.1.4.1.11.2.14.11.1.4.8.1.1.2,HP-ICF-BASIC::hpicfIpConfigAddrMask,IpAddress,read-write,,deprecated,,********* THIS OBJECT IS DEPRECATED ********* This variable contains the IP subnet mask for this interface.
.1.3.6.1.4.1.11.2.14.11.1.4.8.1.1.3,HP-ICF-BASIC::hpicfIpConfigDefaultRouter,IpAddress,read-write,,deprecated,,********* THIS OBJECT IS DEPRECATED ********* This variable contains the IP address of the default router for this interface. For SLIP interfaces, this object contains the IP address of the node at the other end of the serial connection.
.1.3.6.1.4.1.11.2.14.11.1.4.8.1.1.4,HP-ICF-BASIC::hpicfIpConfigPingRouter,INTEGER,read-write,,deprecated,true(1):false(2),********* THIS OBJECT IS DEPRECATED ********* This object is used to configure whether this agent will periodically send ICMP echo request packets to the IP default router for this interface. Since a networking device typically does not transmit unless it receives a management request, and since some autodiscovery applications work by scanning ARP caches, this ICMP echo can be used to try to stay in our default router's ARP cache so that we can be discovered. This object allows the network manager to enable or disable sending these ICMP echo requests.
.1.3.6.1.4.1.11.2.14.11.1.4.8.1.1.5,HP-ICF-BASIC::hpicfIpConfigMtu,Integer32,read-write,,deprecated,,********* THIS OBJECT IS DEPRECATED ********* This object is used to configure the largest datagram that IP will send on this interface. Note that for some interface types, this value may not be changeable, and this object will be implemented as read-only on those interfaces. Also note that most interfaces will not allow the full range of values defined above, since the upper limit on the MTU is constrained by the interface type.
.1.3.6.1.4.1.11.2.14.11.1.4.8.1.1.6,HP-ICF-BASIC::hpicfIpConfigAdminStatus,INTEGER,read-write,,deprecated,disable(1):useConfigured(2):learn(3),********* THIS OBJECT IS DEPRECATED ********* Setting this flag to 'learn' (the default) will clear any existing IP address configuration for this interface, and will cause the device to use a dynamic method (e.g. BootP) to obtain its IP configuration for this interface. This flag must be set to 'useConfigured' in order to configure an IP address for the interface. Setting this flag to 'disable' will disable the IP protocol stack on this interface.
.1.3.6.1.4.1.11.2.14.11.1.4.8.1.1.7,HP-ICF-BASIC::hpicfIpConfigProxyArp,INTEGER,read-write,,deprecated,enabled(1):disabled(2),********* THIS OBJECT IS DEPRECATED ********* Enables/disables ARP proxy on the interface. If set  to enabled(1), the switch will respond on ARP request for IP addresses from other subnets.
.1.3.6.1.4.1.11.2.14.11.1.4.8.1.1.8,HP-ICF-BASIC::hpicfIpConfigLocalProxyArp,INTEGER,read-write,,deprecated,enabled(1):disabled(2),********* THIS OBJECT IS DEPRECATED ********* Enables/disables local ARP proxy on the interface. If set  to enabled(1), the switch will respond on ARP request for IP addresses from local subnets.
.1.3.6.1.4.1.11.2.14.11.1.4.8.2,HP-ICF-BASIC::hpicfIpAddrTable,,not-accessible,,deprecated,,********* THIS OBJECT IS DEPRECATED ********* A table that contains the secondary addresses configured for an interface.
.1.3.6.1.4.1.11.2.14.11.1.4.8.2.1,HP-ICF-BASIC::hpicfIpAddrEntry,,not-accessible,ifIndex:hpicfIpAddrAddr,deprecated,,********* THIS OBJECT IS DEPRECATED ********* Information about a secondary IP address assigned to an interface.
.1.3.6.1.4.1.11.2.14.11.1.4.8.2.1.1,HP-ICF-BASIC::hpicfIpAddrAddr,IpAddress,not-accessible,,deprecated,,********* THIS OBJECT IS DEPRECATED ********* The secondary IP address.
.1.3.6.1.4.1.11.2.14.11.1.4.8.2.1.2,HP-ICF-BASIC::hpicfIpAddrMask,IpAddress,read-create,,deprecated,,********* THIS OBJECT IS DEPRECATED ********* The subnet mask for the address. If not specified at the time of row creation, defaults to the class-based netmask for the address.
.1.3.6.1.4.1.11.2.14.11.1.4.8.2.1.3,HP-ICF-BASIC::hpicfIpAddrStatus,INTEGER,read-create,,deprecated,active(1):notInService(2):notReady(3):createAndGo(4):createAndWait(5):destroy(6),********* THIS OBJECT IS DEPRECATED ********* The status of an IP Address entry.
.1.3.6.1.4.1.11.2.14.11.1.4.8.3,HP-ICF-BASIC::hpicfIpGlobalDefaultRouter,IpAddress,read-write,,current,,This variable contains the IP address of the default router for this system. The value of this object is ignored when ipForwarding is equal to 'forwarding'. This object is only used when hpicfIpGlobalDefaultRouterSource is 'manual'. Note that a configured static route to address 0.0.0.0 takes precedence over the value of this object.
.1.3.6.1.4.1.11.2.14.11.1.4.8.4,HP-ICF-BASIC::hpicfIpGlobalPingRouter,INTEGER,read-write,,current,true(1):false(2),This object is used to configure whether this device will periodically send ICMP echo request packets to its IP default router. Since a networking device typically does not transmit unless it receives a management request, and since some autodiscovery applications work by scanning ARP caches, this ICMP echo can be used to try to stay in our default router's ARP cache so that we can be discovered. This object allows the network manager to enable or disable sending these ICMP echo requests. The value of this object is ignored when ipForwarding is equal to 'forwarding'.
.1.3.6.1.4.1.11.2.14.11.1.4.8.5,HP-ICF-BASIC::hpicfIpZeroBroadcastEnable,INTEGER,read-write,,current,true(1):false(2),This object is used to configure whether switch should silently discard on receipt any packet  addressed to 0.0.0.0 or {<Network>, 0}.If these  packets are not silently discarded, they must be  treated as IP broadcasts.This object is by default  configured to discard zero broadcast packet
.1.3.6.1.4.1.11.2.14.11.1.4.9,HP-ICF-BASIC::hpicfBasicIpxConfig,,,,,,
.1.3.6.1.4.1.11.2.14.11.1.4.9.1,HP-ICF-BASIC::hpicfIpxConfigTable,,not-accessible,,current,,This table contains IPX per-interface configuration information that will take effect after the next reset of the device.
.1.3.6.1.4.1.11.2.14.11.1.4.9.1.1,HP-ICF-BASIC::hpicfIpxConfigEntry,,not-accessible,ifIndex,current,,An entry in the hpicfIpxConfigTable containing the IPX configuration information for a single interface.
.1.3.6.1.4.1.11.2.14.11.1.4.9.1.1.1,HP-ICF-BASIC::hpicfIpxConfigNodeAddress,OCTET,read-only,,current,,The IPX node address that the agent will use for this interface. Note that in many, but not all, cases, this object duplicates the value of ifPhysAddress.
.1.3.6.1.4.1.11.2.14.11.1.4.9.1.1.2,HP-ICF-BASIC::hpicfIpxConfigDefaultRouter,OCTET,read-write,,current,,The IPX node address of the default router for this interface.
.1.3.6.1.4.1.11.2.14.11.1.4.9.1.1.3,HP-ICF-BASIC::hpicfIpxConfigRouterEncaps,INTEGER,read-write,,current,ethernetII(1):ieee8022(2):snap(3):ieee8023Raw(4):noGateway(5):learn(6),The type of encapsulation to for packets sent to the default router on this interface. Note that some of the enumerations for this object may not be appropriate for some interface types.
.1.3.6.1.4.1.11.2.14.11.1.4.9.1.1.4,HP-ICF-BASIC::hpicfIpxConfigAdminStatus,INTEGER,read-write,,current,enable(1):disable(2),Setting this flag to 'enable' (the default) will enable the IPX protocol stack on this interface. Setting this flag to 'disable' will disable the IPX protocol stack on this interface.
.1.3.6.1.4.1.11.2.14.11.1.4.9.2,HP-ICF-BASIC::hpicfIpxNetTable,,not-accessible,,current,,This table contains the IPX network number in use for each encapsulation type on the agent's interfaces. This information is learned dynamically by the agent. An entry will only exist in this table for a particular encapsulation type on a particular interface if we have discovered a network number for that encapsulation type on that interface.
.1.3.6.1.4.1.11.2.14.11.1.4.9.2.1,HP-ICF-BASIC::hpicfIpxNetEntry,,not-accessible,ifIndex:hpicfIpxNetEncaps,current,,An entry in the table, containing the IPX network number for a single encapsulation type on one of the agent's interfaces.
.1.3.6.1.4.1.11.2.14.11.1.4.9.2.1.1,HP-ICF-BASIC::hpicfIpxNetEncaps,INTEGER,not-accessible,,current,ethernetII(1):ieee8022(2):snap(3):ieee8023Raw(4),The encapsulation type for this entry.
.1.3.6.1.4.1.11.2.14.11.1.4.9.2.1.2,HP-ICF-BASIC::hpicfIpxNetNumber,OCTET,read-only,,current,,The IPX network number for this encapsulation on this interface, in network byte order.
.1.3.6.1.4.1.11.2.14.11.1.4.10,HP-ICF-BASIC::hpicfBasicTraps,,,,,,
.1.3.6.1.4.1.11.2.14.11.1.4.10.1,HP-ICF-BASIC::hpicfFixedTrapTable,,not-accessible,,current,,A table of mappings from notification ids to RMON events. This table contains one row for each notification type supported by the agent. It provides a way of configuring an RMON eventTable entry to be triggered whenever this notification occurs. This way, each notification can be configured to use a particular community name (which selects a set of entries in the trap destination table to send the notification to), and provides a common point for configuring the action to take when the notification condition occurs.
.1.3.6.1.4.1.11.2.14.11.1.4.10.1.1,HP-ICF-BASIC::hpicfFixedTrapEntry,,not-accessible,hpicfFixedTrapID,current,,An entry in the table, describing the mapping for a single notification id.
.1.3.6.1.4.1.11.2.14.11.1.4.10.1.1.1,HP-ICF-BASIC::hpicfFixedTrapID,OBJECT,not-accessible,,current,,The object identifier of the notification this entry provides mapping information for. For notifications that are defined using the SNMPv2 NOTIFICATION-TYPE macro, the OID value assigned by the macro is used directly as the hpicfFixedTrapID. For traps defined using the SNMpv1 TRAP-TYPE macro, the value of hpicfFixedTrapID is formed by adding two sub IDs to the trap enterprise. The first added sub ID is 0, and the second is the specific trap value assigned by the macro to the trap. Note: this is the method specified in RFC 1908, 'Coexistence between Version 1 and Version 2 of the Internet-standard Network Management Framework' for converting the enterprise and specific-trap fields of a received Trap-PDU into a value of snmpTrapOID for use in building an SNMPv2-Trap-PDU in a proxy agent.
.1.3.6.1.4.1.11.2.14.11.1.4.10.1.1.2,HP-ICF-BASIC::hpicfFixedTrapEventIndex,Integer32,read-write,,current,,The index of the eventEntry in the RMON MIB that will be triggered when a condition exists for which this notification is supposed to be sent. The eventEntry identified by a particular value of this index is the same as indentified by the same value of the eventIndex object. If there is no corresponding entry in the eventTable, then no association exists. In particular, if this value is zero, no associated event will be generated, as zero is not a valid event index. Note that some agents may implement this object read-only. In this case, it will indicate a permanent entry in the eventTable for each notification.
.1.3.6.1.4.1.11.2.14.11.1.4.10.2,HP-ICF-BASIC::hpicfTrapDestTable,,not-accessible,,deprecated,,*************THIS OBJECT IS DEPRECATED ********** A table of trap destinations.
.1.3.6.1.4.1.11.2.14.11.1.4.10.2.1,HP-ICF-BASIC::hpicfTrapDestEntry,,not-accessible,hpicfTrapDestIndex,current,,An entry in the table, containing information about a single trap destination.
.1.3.6.1.4.1.11.2.14.11.1.4.10.2.1.1,HP-ICF-BASIC::hpicfTrapDestIndex,Integer32,not-accessible,,deprecated,,*************THIS OBJECT IS DEPRECATED ********** A value that uniquely identifies this  hpicfTrapDestEntry.
.1.3.6.1.4.1.11.2.14.11.1.4.10.2.1.2,HP-ICF-BASIC::hpicfTrapDestVersion,INTEGER,read-create,,deprecated,snmpv1(1):snmpv2c(2),*************THIS OBJECT IS DEPRECATED ********** This object is used to indicate what version of SNMP should be used to send the trap to this destination. When the value of this object is 'snmpv1', the trap will be sent to this destination as a Trap-PDU using an SNMPv1 message wrapper, as specified in RFC 1157. When the value of this object is 'snmpv2c', the trap will be sent to this destination as a SNMPv2-Trap-PDU using the Community-based SNMPv2 framework as specified in RFC 1901. An agent should reject an attempt to set an instance of this object to a value representing a version of the SNMP framework that is not supported by that agent.
.1.3.6.1.4.1.11.2.14.11.1.4.10.2.1.3,HP-ICF-BASIC::hpicfTrapDestCommunity,OCTET,read-create,,deprecated,,*************THIS OBJECT IS DEPRECATED ********** A community to which this destination address belongs. This entry is associated with any entry in the RMON MIB's eventTable whose value of eventCommunity is equal to the value of this object. Every time an associated event entry sends a trap due to an event, that trap will be sent to each address in the hpicfTrapDestTable with a hpicfTrapDestCommunity equal to eventCommunity. This object may not be modified if the associated hpicfTrapDestStatus object is equal to active(1).
.1.3.6.1.4.1.11.2.14.11.1.4.10.2.1.4,HP-ICF-BASIC::hpicfTrapDestTDomain,OBJECT,read-create,,deprecated,,*************THIS OBJECT IS DEPRECATED ********** The transport domain to use to send this trap. This object may not be modified if the associated hpicfTrapDestStatus object is equal to active(1).
.1.3.6.1.4.1.11.2.14.11.1.4.10.2.1.5,HP-ICF-BASIC::hpicfTrapDestTAddress,OCTET,read-create,,deprecated,,*************THIS OBJECT IS DEPRECATED ********** The address to send traps to on behalf of this entry, formatted according to the value of the corresponding instance of the hpicfTrapDestTDomain object. This object may not be modified if the associated hpicfTrapDestStatus object is equal to active(1).
.1.3.6.1.4.1.11.2.14.11.1.4.10.2.1.6,HP-ICF-BASIC::hpicfTrapDestFilter,Integer32,read-create,,deprecated,,*************THIS OBJECT IS DEPRECATED ********** The type of events that will be sent to this trap receiver. This filter is mainly used for limiting 'system event' traps that will be sent to a specific receiver. This filter is specified as a sum of values, where each value specifies a classification of traps that will be sent to this trap receiver. The value for a particular trap class C is computed as 2 raised to a value representing C. The trap classes are defined as follows: C (bit#) Trap class ----------------------------------------------- 0 SNMP traps 1 informational events 2 warning events 3 critical events 4 debug events (HP internal use only) For example, to specify that this trap receiver should receive SNMP traps and critical event traps, this object should be set to a value of 9 (2^0 + 2^3). Note that some agents may not support trap filtering. Those agents may either implement this object as read-only, or with a restricted write syntax.
.1.3.6.1.4.1.11.2.14.11.1.4.10.2.1.7,HP-ICF-BASIC::hpicfTrapDestStatus,INTEGER,read-create,,deprecated,active(1):notInService(2):notReady(3):createAndGo(4):createAndWait(5):destroy(6),*************THIS OBJECT IS DEPRECATED ********** The status of this trap destination entry. An entry may not exist in the active state unless all of the objects in the entry are consistent. In particular, the value of hpicfTrapDestAddress must have a legal length and value for the protocol specified by hpicfTrapDestProtocol.
.1.3.6.1.4.1.11.2.14.11.1.4.10.2.1.8,HP-ICF-BASIC::hpicfTrapDestNotifyType,INTEGER,read-create,,deprecated,trap(1):inform(2),*************THIS OBJECT IS DEPRECATED ********** This object is used to indicate what type of SNMP trap/informs should be used. When the value of this object is 'trap',
.1.3.6.1.4.1.11.2.14.11.1.4.10.2.1.9,HP-ICF-BASIC::hpicfTrapDestRetries,Integer32,read-create,,deprecated,,*************THIS OBJECT IS DEPRECATED ********** This object is used to indicate what number of retries to be attempted when a response is not 
.1.3.6.1.4.1.11.2.14.11.1.4.10.2.1.10,HP-ICF-BASIC::hpicfTrapDestTimeout,INTEGER,read-create,,deprecated,,*************THIS OBJECT IS DEPRECATED ********** This object is used to indicate what number of seconds between retries to be attempted when a 
.1.3.6.1.4.1.11.2.14.11.1.4.11,HP-ICF-BASIC::hpicfBasicRmon,,,,,,
.1.3.6.1.4.1.11.2.14.11.1.4.11.3,HP-ICF-BASIC::hpicfBasicAlarm,,,,,,
.1.3.6.1.4.1.11.2.14.11.1.4.11.3.1,HP-ICF-BASIC::hpicfBasicAlarmNVCapacity,Integer32,read-only,,current,,The maximum number of alarmTable entries this agent is capable of saving in nonvolatile storage.
.1.3.6.1.4.1.11.2.14.11.1.4.11.3.2,HP-ICF-BASIC::hpicfBasicAlarmTable,,not-accessible,,current,,HP ICF specific extension to the RMON alarm table.
.1.3.6.1.4.1.11.2.14.11.1.4.11.3.2.1,HP-ICF-BASIC::hpicfBasicAlarmEntry,,not-accessible,,current,,Extensions for a single row in the RMON alarm table.
.1.3.6.1.4.1.11.2.14.11.1.4.11.3.2.1.1,HP-ICF-BASIC::hpicfBasicAlarmStorageType,INTEGER,read-create,,current,other(1):volatile(2):nonVolatile(3):permanent(4):readOnly(5),The storage type for this alarm entry.
.1.3.6.1.4.1.11.2.14.11.1.4.11.9,HP-ICF-BASIC::hpicfBasicEvent,,,,,,
.1.3.6.1.4.1.11.2.14.11.1.4.11.9.1,HP-ICF-BASIC::hpicfBasicEventNVCapacity,Integer32,read-only,,current,,The maximum number of eventTable entries this agent is capable of saving in nonvolatile storage.
.1.3.6.1.4.1.11.2.14.11.1.4.11.9.2,HP-ICF-BASIC::hpicfBasicEventTable,,not-accessible,,current,,HP ICF specific extension to the RMON event table.
.1.3.6.1.4.1.11.2.14.11.1.4.11.9.2.1,HP-ICF-BASIC::hpicfBasicEventEntry,,not-accessible,,current,,Extensions for a single row in the RMON event table.
.1.3.6.1.4.1.11.2.14.11.1.4.11.9.2.1.1,HP-ICF-BASIC::hpicfBasicEventStorageType,INTEGER,read-create,,current,other(1):volatile(2):nonVolatile(3):permanent(4):readOnly(5),The storage type for this event entry. Rows having the value 'permanent' allow write access to the associated instances of eventCommunity and eventType.
.1.3.6.1.4.1.11.2.14.11.1.4.12,HP-ICF-BASIC::hpicfBasicSnmpTargetAddrLogFilter,,,,,,
.1.3.6.1.4.1.11.2.14.11.1.4.12.1,HP-ICF-BASIC::hpicfSnmpTargetAddrLogFilterTable,,not-accessible,,current,,Adds an HpicfSnmpTargetAddrLogFilterEntry to snmpTargetAddrTable.
.1.3.6.1.4.1.11.2.14.11.1.4.12.1.1,HP-ICF-BASIC::hpicfSnmpTargetAddrLogFilterEntry,,not-accessible,,current,,Adds an HpicfSnmpTargetAddrLogFilterEntry to snmpTargetAddrTable.
.1.3.6.1.4.1.11.2.14.11.1.4.12.1.1.1,HP-ICF-BASIC::hpicfSnmpTargetAddrLogFilter,Integer32,read-create,,current,,The type of events that will be sent to this trap receiver. This filter is mainly used for limiting 'system event' traps that will be sent to a specific receiver. This filter is specified as a sum of values, where each value specifies a classification of traps that will be sent to this trap receiver. The value for a particular trap class C is computed as 2 raised to a value representing C. The trap classes are defined as follows: C (bit#) Trap class ----------------------------------------------- 0 SNMP traps 1 informational events 2 warning events 3 critical events 4 debug events (HP internal use only) For example, to specify that this trap receiver should receive SNMP traps and critical event traps, this object should be set to a value of 9 (2^0 + 2^3). Note that some agents may not support trap filtering. Those agents may either implement this object as read-only, or with a restricted write syntax.
.1.3.6.1.4.1.11.2.14.11.1.4.13,HP-ICF-BASIC::hpicfBannerStatus,INTEGER,read-write,,current,enabled(1):disabled(2),When the value of this object is 'enabled(1)', it means that the banner has been configured and will be displayed at console or web-ui login. When the value of this object 
.1.3.6.1.4.1.11.2.14.11.1.4.14,HP-ICF-BASIC::hpicfBanner,,,,,,
.1.3.6.1.4.1.11.2.14.11.1.4.14.1,HP-ICF-BASIC::hpicfBannerMOTD,OCTET,read-write,,current,,An administratively configured message that is displayed  to the user when logged in to the device through  either the console or web-ui
.1.3.6.1.4.1.11.2.14.11.1.4.14.2,HP-ICF-BASIC::hpicfExecBannerStatus,INTEGER,read-write,,current,enabled(1):disabled(2),When the value of this object is 'enabled(1)', it means
.1.3.6.1.4.1.11.2.14.11.1.4.14.3,HP-ICF-BASIC::hpicfBannerExec,OCTET,read-write,,current,,An administratively configured exec banner message that
.1.3.6.1.4.1.11.2.14.11.1.4.15,HP-ICF-BASIC::hpicfBasicDNSConfig,,,,,,
.1.3.6.1.4.1.11.2.14.11.1.4.15.1,HP-ICF-BASIC::hpicfDNSDefaultDomainSuffix,OCTET,read-write,,current,,The default domain name (A unique designator on the  network composed of symbols separated by dots) to  which resolver appends host names before sending the  queries to name servers. An example of a valid  default domain suffix is 'hp.com'. The resolver will not use a default domain suffix if this object  is set to empty-string (which is the default value.)
.1.3.6.1.4.1.11.2.14.11.1.4.15.2,HP-ICF-BASIC::hpicfDNSNameServerTable,,not-accessible,,deprecated,,#### Deprecated #### A table that contains information about the  (DNS) Name Server configuration in this  device.
.1.3.6.1.4.1.11.2.14.11.1.4.15.2.1,HP-ICF-BASIC::hpicfDNSNameServerEntry,,not-accessible,hpicfDNSNameServerAddress,deprecated,,### deprecated ###Information about name server configuration entry on this resolver device. 
.1.3.6.1.4.1.11.2.14.11.1.4.15.2.1.1,HP-ICF-BASIC::hpicfDNSNameServerAddress,IpAddress,not-accessible,,deprecated,,### Deprecated ###IPv4 address of the given name server.
.1.3.6.1.4.1.11.2.14.11.1.4.15.2.1.2,HP-ICF-BASIC::hpicfDNSNameServerEntryStatus,INTEGER,read-create,,deprecated,active(1):notInService(2):notReady(3):createAndGo(4):createAndWait(5):destroy(6),### Deprecated ###The row status of a given name server entry.
.1.3.6.1.4.1.11.2.14.11.1.4.15.3,HP-ICF-BASIC::hpicfInetDNSNameServerTable,,not-accessible,,current,,A table that contains information about the  (DNS) Name Server configuration in this  device.This table has 3 index's PRIORITY ADDRTYPE ADDR,for each pririoty only one address can be  configured. An address can be created in this  table only if the 'hpicfDNSConfigMode' is  manual(2).
.1.3.6.1.4.1.11.2.14.11.1.4.15.3.1,HP-ICF-BASIC::hpicfInetDNSNameServerEntry,,not-accessible,hpicfInetDNSNameServerAddrIndex:hpicfInetDNSNameServerAddrType:hpicfInetDNSNameServerAddress,current,,An entry in hpicfInetDNSNameServerEntry contains single manually configured DNS Address on this resolver device. This can created only if the 'hpicfDNSConfigMode' is set to manual(2).
.1.3.6.1.4.1.11.2.14.11.1.4.15.3.1.1,HP-ICF-BASIC::hpicfInetDNSNameServerAddrIndex,Integer32,not-accessible,,current,,Index(which is also treated as priority)  of DNS server address configured.
.1.3.6.1.4.1.11.2.14.11.1.4.15.3.1.2,HP-ICF-BASIC::hpicfInetDNSNameServerAddrType,INTEGER,not-accessible,,current,unknown(0):ipv4(1):ipv6(2):ipv4z(3):ipv6z(4):dns(16),Address Type of the DNS Name server stored in  hpicfInetDNSNameServer Address.
.1.3.6.1.4.1.11.2.14.11.1.4.15.3.1.3,HP-ICF-BASIC::hpicfInetDNSNameServerAddress,OCTET,not-accessible,,current,,Address of DNS and type of address stored is is mentioned in hpicfInetDNSNameServerAddType  This field needs to be used in conjunction with hpicfInetDNSNameServerAddrType.
.1.3.6.1.4.1.11.2.14.11.1.4.15.3.1.4,HP-ICF-BASIC::hpicfInetDNSNameServerEntryStatus,INTEGER,read-create,,current,active(1):notInService(2):notReady(3):createAndGo(4):createAndWait(5):destroy(6),The row status of a given name server entry.
.1.3.6.1.4.1.11.2.14.11.1.4.15.3.1.5,HP-ICF-BASIC::hpicfInetDNSNameServerEntryIsOobm,INTEGER,read-create,,current,true(1):false(2),This object indicates whether this DNS Server is reachable over OOBM (Out Of Band Management) interface or not. This mib object will be applicable only if there is a physical OOBM port on the device.
.1.3.6.1.4.1.11.2.14.11.1.4.15.4,HP-ICF-BASIC::hpicfDNSDefaultDomainSuffixIsOobm,OCTET,read-write,,current,,The default domain name (A unique designator on the network composed of symbols separated by dots) to which resolver appends host names before sending the queries to name servers on OOBM plane. An example of a valid default domain suffix is 'hp.com'. The resolver will not use a default domain suffix if this object is set to empty-string (which is the default value). 
.1.3.6.1.4.1.11.2.14.11.1.4.15.5,HP-ICF-BASIC::hpicfDNSConfigMode,INTEGER,read-write,,current,dhcp(1):manual(2):disabled(3),Setting this flag to 'dhcp' will cause the device to use DHCP to obtain its DNS configuration parameters (such as dns servers and domain name suffix). Setting this flag to 'manual' will allow manual DNS configuration. Setting this flag to 'disabled' will clear any existing DNS configuration.
.1.3.6.1.4.1.11.2.14.11.1.4.15.6,HP-ICF-BASIC::hpicfCurDNSConfig,,,,,,
.1.3.6.1.4.1.11.2.14.11.1.4.15.6.1,HP-ICF-BASIC::hpicfCurDNSDefaultDomainSuffix,OCTET,read-only,,current,,The default domain name (A unique designator on the  network composed of symbols separated by dots) to  which resolver appends host names before sending the  queries to name servers. An example of a valid  default domain suffix is 'hp.com'. The resolver will not use a default domain suffix if this object  is set to empty-string (which is the default value.)
.1.3.6.1.4.1.11.2.14.11.1.4.16,HP-ICF-BASIC::hpicfResetDefault,INTEGER,read-write,,current,primary(1):secondary(2),The switch boots from 'primary image' or 'secondary image'  based on this object.
.1.3.6.1.4.1.11.2.14.11.1.4.17,HP-ICF-BASIC::hpicfTelnet6Enable,INTEGER,read-write,,deprecated,enabled(1):disabled(2),********* THIS OBJECT IS DEPRECATED ********* When the value of this object is 'enabled(1)', the telnet6 server on this agent is running and allowed to accept connections. When the value of this object is 'disabled(2)', no incoming telnet6 connections will be accepted by this agent.
.1.3.6.1.4.1.11.2.14.11.1.4.18,HP-ICF-BASIC::hpicfBasicSNMPConfig,,,,,,
.1.3.6.1.4.1.11.2.14.11.1.4.18.1,HP-ICF-BASIC::hpSwitchSnmpViewConfig,INTEGER,read-write,,current,enabled(1):disabled(2),Enable/Disable SNMP support for hpSwitchAuthentication MIB. When the MIB access is enabled, Manager read/write access to the MIB is permitted. Operator read/write  access to the MIB is always denied. For security reasons, network administrators are encouraged to disable SNMPV2c before using the MIB.
.1.3.6.1.4.1.11.2.14.11.1.4.18.2,HP-ICF-BASIC::hpicfSnmpV2Enable,INTEGER,read-write,,current,enabled(1):disabled(2),When the value of this object is 'enabled(1)',  it means that SNMPv1/v2 is enabled on the system. When the value of this object is 'disabled(2)',  it means that SNMPv1/v2 is disabled on the system.
.1.3.6.1.4.1.11.2.14.11.1.4.19,HP-ICF-BASIC::hpicfBasicConfig,,,,,,
.1.3.6.1.4.1.11.2.14.11.1.4.19.1,HP-ICF-BASIC::hpicfDisplayLogNumbers,INTEGER,read-write,,current,true(1):false(2),When this object is set to True, Log event numbers  will be displayed when log is displayed via the CLI or via the MENU. Log event numbers will not be displayed when this object is set to False.
.1.3.6.1.4.1.11.2.14.11.1.4.19.2,HP-ICF-BASIC::hpicfIncludeCredentials,INTEGER,read-write,,current,enabled(1):disabled(2):radiusTacacsOnly(3),This object: enabled - Include password and credentials in the switch configuration. disabled - Do not include credentials in the switch configuration. radiusTacasOnly - Enable only the RADIUS and TACACS+ server keys in the switch configuration. NOTE: This will insert possibly sensitive information  in switch configuration files, and as a part of some  CLI commands output. It is strongly recommended that you use SFTP rather than TFTP for transfer of the configuration over the network, and that you use the web configuration  interface only with SSL enabled.
.1.3.6.1.4.1.11.2.14.11.1.4.20,HP-ICF-RELOAD-MIB::hpicfReloadMIB,,,,,,This MIB module describes objects for basic management of reloading devices in the HP Integrated Communication Facility product line.
.1.3.6.1.4.1.11.2.14.11.1.4.20.1,HP-ICF-RELOAD-MIB::hpicfReloadObjects,,,,,,
.1.3.6.1.4.1.11.2.14.11.1.4.20.1.1,HP-ICF-RELOAD-MIB::hpicfReloadState,INTEGER,read-write,,current,notScheduled(1):reloadAfter(2):reloadAt(3),This object specifies the state of the device. If it is in: (1) 'no reload' was scheduled (2) 'reload after' was scheduled (3) 'reload at' was scheduled To cancel the scheduled reload, this object needs to be set with (1).  NOTE: This object cannot be set with (2) or (3).When hpicfReloadAfter or hpicfReloadAt  is scheduled the state of hpicfReloadState is automatically changed to (2) or (3) respectively.
.1.3.6.1.4.1.11.2.14.11.1.4.20.1.2,HP-ICF-RELOAD-MIB::hpicfReloadAfter,Integer32,read-write,,current,,The object specifies the time in seconds after which reload will occur.If no reload is scheduled it returns -1. To schedule a reload/reboot, time  in seconds is entered and 0 for immediate reload. When hpicfReloadAfter is scheduled the state of hpicfReloadState is changed to reloadAfter automatically. NOTE: If hpicfReloadAt or hpicfReloadAfter is already  scheduled, it will automatically be cancelled and the new hpicfReloadAfter is scheduled.
.1.3.6.1.4.1.11.2.14.11.1.4.20.1.3,HP-ICF-RELOAD-MIB::hpicfReloadAt,OCTET,read-write,,current,,The object specifies the time and date at which reload will occur. To schedule a reload in the future, the time and date at which reload  needs to occur should be given. When hpicfReloadAt is scheduled it will change the state of  hpicfReloadState to reloadAt. NOTE: If hpicfReloadAt or hpicfReloadAfter is already  scheduled, it will automatically be cancelled and the new hpicfReloadAt is scheduled.
.1.3.6.1.4.1.11.2.14.11.1.4.20.2,HP-ICF-RELOAD-MIB::hpicfEntityReload,,,,,,
.1.3.6.1.4.1.11.2.14.11.1.4.20.2.2,HP-ICF-RELOAD-MIB::hpicfReloadTable,,not-accessible,,current,,This table contains a row for different entities and
.1.3.6.1.4.1.11.2.14.11.1.4.20.2.2.1,HP-ICF-RELOAD-MIB::hpicfReloadEntry,,not-accessible,entPhysicalIndex,current,,Information about Reload table.
.1.3.6.1.4.1.11.2.14.11.1.4.20.2.2.1.1,HP-ICF-RELOAD-MIB::hpicfReloadControl,INTEGER,read-write,,current,reloadSlotNone(1):fullPowerCycleReload(2),This specifies the control action for this entity
.1.3.6.1.4.1.11.2.14.11.1.4.20.2.2.1.2,HP-ICF-RELOAD-MIB::hpicfReloadDateTime,OCTET,read-only,,current,,The object specifies the time and date at which the last reload will occured
.1.3.6.1.4.1.11.2.14.11.1.4.20.3,HP-ICF-RELOAD-MIB::hpicfReloadConformance,,,,,,
.1.3.6.1.4.1.11.2.14.11.1.4.20.3.1,HP-ICF-RELOAD-MIB::hpicfReloadGroups,,,,,,
.1.3.6.1.4.1.11.2.14.11.1.4.20.3.1.1,HP-ICF-RELOAD-MIB::hpicfReloadGroup,,,,,,A collection of objects for reload command.
.1.3.6.1.4.1.11.2.14.11.1.4.20.3.2,HP-ICF-RELOAD-MIB::hpicfReloadCompliances,,,,,,
.1.3.6.1.4.1.11.2.14.11.1.4.20.3.2.1,HP-ICF-RELOAD-MIB::hpicfReloadFullCompliance1,,,,,,The compliance statement for SNMP entities which implement the RELOAD-MIB with support for writable objects and notifications. Such an implementation can be both monitored and configured via SNMP. It can also send notifications about change in the operational status of the Reload application. 
.1.3.6.1.4.1.11.2.14.11.1.4.20.3.2.2,HP-ICF-RELOAD-MIB::hpicfReloadFullCompliance2,,,,,,The compliance statement for SNMP entities which implement the RELOAD-MIB with support for writable objects. Such an implementation can be both monitored and configured via SNMP. 
.1.3.6.1.4.1.11.2.14.11.1.4.20.3.2.3,HP-ICF-RELOAD-MIB::hpicfReloadReadOnlyCompliance1,,,,,,The compliance statement for SNMP entities which implement the hpicfReload MIB without support for read-write (i.e. in read-only mode). It can also send notifications about change in the operational status of the syslog application. 
.1.3.6.1.4.1.11.2.14.11.1.5,HP-ICF-OID::hpicfStack,,,,,,
.1.3.6.1.4.1.11.2.14.11.1.5.1,HP-ICF-STACK::hpicfStackBoxTable,,not-accessible,,current,,This table contains a list of physical boxes currently in the stack.
.1.3.6.1.4.1.11.2.14.11.1.5.1.1,HP-ICF-STACK::hpicfStackBoxEntry,,not-accessible,entPhysicalIndex,current,,An entry containing information about a physical box in the stack. This table is indexed by the value of entPhysicalIndex that corresponds to the row in the entPhysicalTable for this box.
.1.3.6.1.4.1.11.2.14.11.1.5.1.1.1,HP-ICF-STACK::hpicfStackBoxId,OCTET,read-only,,current,,The box identifier that uniquely identifies this physical box. The value of this object is the serial number of the box.
.1.3.6.1.4.1.11.2.14.11.1.5.1.1.2,HP-ICF-STACK::hpicfStackBoxName,OCTET,read-write,,current,,A settable name for this box. This name defaults to an ASCII representation of the base MAC address of the box, but may be set to a user-friendly display string by a management application.
.1.3.6.1.4.1.11.2.14.11.1.5.2,HP-ICF-STACK::hpicfStackAgentTable,,not-accessible,,current,,This table provides a list of SNMP agent cards in the stack that are capable of managing the stack. Note that this table is redundant, since this information is available in the Entity MIB, but is provided for the convenience of management applications, so that they are not required to scan the entire entPhysicalTable to determine what agent cards are present.
.1.3.6.1.4.1.11.2.14.11.1.5.2.1,HP-ICF-STACK::hpicfStackAgentEntry,,not-accessible,entPhysicalIndex,current,,An entry in the hpicfStackAgentTable representing a single agent card. This table is indexed by the value of entPhysicalIndex that corresponds to the row in the entPhysicalTable for this agent card.
.1.3.6.1.4.1.11.2.14.11.1.5.2.1.1,HP-ICF-STACK::hpicfStackAgentBoxId,OCTET,read-only,,current,,The value of hpicfStackBoxId for the box containing this agent card. Note that this object is redundant since containment information is available in the Entity MIB, but is provided for the convenience of management applications (and so that there would be at least one accessible column in this table).
.1.3.6.1.4.1.11.2.14.11.1.5.3,HP-ICF-STACK::hpicfStackActiveAgent,Integer32,read-write,,current,,The value of entPhysicalIndex for the agent that is currently managing this stack. A set to this value will also set hpicfStackAgentForced to 'true'. Note that setting this object to a value different from the current value will cause this agent to reset. After reset, the current agent will no longer be active, because the new agent will take over.
.1.3.6.1.4.1.11.2.14.11.1.5.4,HP-ICF-STACK::hpicfStackAgentForced,INTEGER,read-only,,current,true(1):false(2),A value of 'true' indicates that the current active agent card has been chosen by a management action as the active agent. This management action may have been performed through a console user interface command, or by setting the hpicfStackActiveAgent object. The reason for this is to allow the network administrator to prevent an added redundant agent from taking over when there is a configured agent card in the stack.
.1.3.6.1.4.1.11.2.14.11.1.6,HP-ICF-OID::hpicfLinktest,,,,,,
.1.3.6.1.4.1.11.2.14.11.1.6.1,HP-ICF-LINKTEST::hpicfLinkTestNextIndex,Integer32,read-write,,current,,A currently unassigned value of hpicfLinkTestIndex. The value 0 indicates that no unassigned values are available. In order to cause a non-zero value of this object to be assigned for use as the hpicfLinkTestIndex of a future link test, it must be successfully modified by a set operation. When modified by a set operation, the new value must precisely match the value presently held by the object. If not, the management protocol set operation will fail. Immediately after the completion of a successful set operation, the agent must modify the value of this object. The algorithm for modifying the value is implementation-dependent, and may use a subset of values within the legal range. However, the agent must guarantee that the new value is not assigned to any in-use value of hpicfLinkTestIndex. A management station creates a new link test using this algorithm: - issue a management protocol retrieval operation to obtain the value of hpicfLinkTestNextIndex; if the retrieved value is zero, a new link test cannot be created at this time; - issue a management protocol set operation for hpicfLinkTestNextIndex, supplying the same value as obtained in the previous step; - if the set operation succeeds, use the supplied value as the hpicfLinkTestIndex of the new link test; if the set operation fails, go back to the first step and obtain a new value for hpicfLinkTestNextIndex; - issue a management protocol set operation to create an instance of the hpicfLinkTestStatus object setting its value to 'createAndGo' or 'createAndWait' (as specified in the description of the RowStatus textual convention). Note that the set of hpicfLinkTestNextIndex and the instance of hpicfLinkTestStatus may occur in the same set operation if desired.
.1.3.6.1.4.1.11.2.14.11.1.6.2,HP-ICF-LINKTEST::hpicfLinkTestTable,,not-accessible,,current,,A table of in-progress link tests.
.1.3.6.1.4.1.11.2.14.11.1.6.2.1,HP-ICF-LINKTEST::hpicfLinkTestEntry,,not-accessible,hpicfLinkTestIndex,current,,A row in the table, containing information about a single link test.
.1.3.6.1.4.1.11.2.14.11.1.6.2.1.1,HP-ICF-LINKTEST::hpicfLinkTestIndex,Integer32,not-accessible,,current,,The value of this object uniquely identifies this link test.
.1.3.6.1.4.1.11.2.14.11.1.6.2.1.2,HP-ICF-LINKTEST::hpicfLinkTestType,INTEGER,read-create,,current,icmpEcho(1):ieee8022Test(2):ipxDiagnostic(3),The type of test to run.
.1.3.6.1.4.1.11.2.14.11.1.6.2.1.3,HP-ICF-LINKTEST::hpicfLinkTestAddress,OCTET,read-create,,current,,The destination address used for sending link test packets, formatted according to the value of the corresponding instance of hpicfLinkTestType. When hpicfLinkTestType is equal to 'icmpEcho', this object will be four octets long, and contain an IP address in network byte order. When hpicfLinkTestType is equal to 'ieee8022Test', this object will be six octets long, and contain an IEEE MAC address in canonical order. When hpicfLinkTestType is equal to 'ipxDiagnostic', this object will be ten octets long, and will contain the IPX network number in network byte order, followed by the IPX node number in network byte order.
.1.3.6.1.4.1.11.2.14.11.1.6.2.1.4,HP-ICF-LINKTEST::hpicfLinkTestIfIndex,Integer32,read-create,,current,,The local interface to send the link test packets on. The value of this object must correspond to an ifIndex value for an interface capable of supporting the requested link test. The value 0 is used to indicate that the agent should determine the interface using local routing information.
.1.3.6.1.4.1.11.2.14.11.1.6.2.1.5,HP-ICF-LINKTEST::hpicfLinkTestTimeout,INTEGER,read-create,,current,,The time interval over which a link test response must be received, or the test is counted as failed.
.1.3.6.1.4.1.11.2.14.11.1.6.2.1.6,HP-ICF-LINKTEST::hpicfLinkTestRepetitions,Integer32,read-create,,current,,The total number of times that the agent should send link test packets to the destination host.
.1.3.6.1.4.1.11.2.14.11.1.6.2.1.7,HP-ICF-LINKTEST::hpicfLinkTestAttempts,Integer32,read-only,,current,,The number of times we have sent link test packets to the destination during the current test. This object will start at zero when the corresponding instance of hpicfLinkTestStatus is set to 'active'. It will increment at the completion of each iteration of the test until either it reaches the value of hpicfLinkTestRepetitions, or the corresponding instance of hpicfLinkTestStatus is set to a value other than 'active'. Note that it is incremented at the completion of each iteration, not when the link test packet is sent, so that the number of failures can be calculated accurately.
.1.3.6.1.4.1.11.2.14.11.1.6.2.1.8,HP-ICF-LINKTEST::hpicfLinkTestSuccesses,Integer32,read-only,,current,,The number of times that we have recieved a response to a link test packet during the current test. This object will start at zero when the corresponding instance of hpicfLinkTestStatus is set to 'active'. It will increment each time the agent recieves a response from the destination of this test. Note that the number of failed attempts is given by hpicfLinkTestAttempts - hpicfLinkTestSuccesses.
.1.3.6.1.4.1.11.2.14.11.1.6.2.1.9,HP-ICF-LINKTEST::hpicfLinkTestMinRespTime,Integer32,read-only,,current,,The shortest time (in milliseconds) between request and response for all of the link tests that have been attempted as part of this test.
.1.3.6.1.4.1.11.2.14.11.1.6.2.1.10,HP-ICF-LINKTEST::hpicfLinkTestMaxRespTime,Integer32,read-only,,current,,The longest time (in milliseconds) between request and response for all of the link tests that have been attempted as part of this test.
.1.3.6.1.4.1.11.2.14.11.1.6.2.1.11,HP-ICF-LINKTEST::hpicfLinkTestTotalRespTime,Integer32,read-only,,current,,The sum of all of the response times (in milliseconds) for all of the link tests that have been attempted as part of this test. This value can be used in conjunction with hpicfLinkTestSuccesses to calculate the average response time.
.1.3.6.1.4.1.11.2.14.11.1.6.2.1.12,HP-ICF-LINKTEST::hpicfLinkTestOwner,OCTET,read-create,,current,,The entity that configured this test and is therefore using the resources assigned to it.
.1.3.6.1.4.1.11.2.14.11.1.6.2.1.13,HP-ICF-LINKTEST::hpicfLinkTestStatus,INTEGER,read-create,,current,active(1):notInService(2):notReady(3):createAndGo(4):createAndWait(5):destroy(6),The status of this entry.
.1.3.6.1.4.1.11.2.14.11.1.6.2.1.14,HP-ICF-LINKTEST::hpicfLinkTestDeleteMode,INTEGER,read-create,,current,keepWhenDone(1):destroyWhenDone(2),When the value of this object is 'keepWhenDone', the associated instance of the hpicfLinkTestStatus object will be changed to 'notInService' upon completion of the test. It will then be timed out by the agent after 5 minutes in the 'notInService' state. When the value of this object is 'destroyWhenDone', the associated instance of the hpicfLinkTestStatus object will be changed to 'destroy' upon completion of the test. This will remove the row from the table immediately after the test completes.
.1.3.6.1.4.1.11.2.14.11.1.7,HP-ICF-OID::hpicfFaultFinder,,,,,,
.1.3.6.1.4.1.11.2.14.11.1.7.1,HP-ICF-FAULT-FINDER-MIB::hpicfFfControlTable,,not-accessible,,current,,This table contains one entry per fault type that this agent is capable of monitoring.
.1.3.6.1.4.1.11.2.14.11.1.7.1.1,HP-ICF-FAULT-FINDER-MIB::hpicfFfControlEntry,,not-accessible,hpicfFfControlIndex,current,,Configuration information for a particular fault type.
.1.3.6.1.4.1.11.2.14.11.1.7.1.1.1,HP-ICF-FAULT-FINDER-MIB::hpicfFfControlIndex,INTEGER,not-accessible,,current,badDriver(1):badXcvr(2):badCable(3):tooLongCable(4):overBandwidth(5):bcastStorm(6):partition(7):misconfiguredSQE(8):polarityReversal(9):networkLoop(10):lossOfLink(11):portSecurityViolation(12):backupLinkTransition(13):meshingFault(14):fanFault(15):rpsFault(16):stuck10MbFault(17):lossOfStackMember(18):hotSwapReboot(19):duplexMismatchHDX(20):duplexMismatchFDX(21):flowcntlJumbosFault(22):portSelftestFailure(23):xcvrUnidentified(24):xcvrUnsupported(25):crfNotify(26):crfThrottled(27):crfBlocked(28):xcvrNotYetSupported(29):xcvrBRevOnly(30):xcvrNotSupportedOnPort(31):phyReadFailure(32):linkFlap(33):intel82566dmportprotect(34):xcvrExceedQty(35):xcvrClone(36):xcvrCloneReminder(37),The type of fault for which this entry contains configuration information.
.1.3.6.1.4.1.11.2.14.11.1.7.1.1.2,HP-ICF-FAULT-FINDER-MIB::hpicfFfAction,INTEGER,read-write,,current,none(1):warn(2):warnAndDisable(3):warnAndSpeedReduce(4):warnAndSpeedReduceAndDisable(5),This object is used to configure the action, if any, to be taken if a fault of this type is detected by the agent. Setting an instance of this object to 'none' will clear any previous state of the associated fault on all ports. This object is used to enable or disable the port disable feature for this fault type. Setting this object to 'warnAndDisable' will enable the port disable feature for this fault type. This feature is intended to allow an agent to disable ports that are being disruptive to the rest of the network. Note that not all agents will support setting this object to 'warnAndDisable'. The agent may choose not to disable a particular port for a particular fault based on its knowledge of if/how that fault disrupts the network.
.1.3.6.1.4.1.11.2.14.11.1.7.1.1.3,HP-ICF-FAULT-FINDER-MIB::hpicfFfWarnTolerance,Integer32,read-write,,current,,The tolerance level used to calculate the fault warning threshold for this fault type. The agent will periodically check relevant statistics for each port for each type of fault. If the warning threshold has been exceeded, and fault warning action is enabled for that fault type, an hpicfFaultFinderTrap notification will be sent. In addition, an entry will be made in the hpicfFfLogTable for the fault. Once a fault warning has fired, a hysteresis mechanism assures that another warning will not be fired until the relevant counter drops below a hysteresis threshold value.
.1.3.6.1.4.1.11.2.14.11.1.7.1.1.4,HP-ICF-FAULT-FINDER-MIB::hpicfFfDisablePortTolerance,Integer32,read-write,,current,,The tolerance level used to calculate the port disable threshold for this fault type. The value of an instance of this object MUST be greater than the value of the corresponding instance of the hpicfFfWarnTolerance. The agent will periodically check relevant statistics for each port for each type of fault. If the port disable threshold has been exceeded, and port disable is enabled for that fault type, an hpicfFaultFinderTrap notification will be sent. In addition, an entry will be made in the hpicfFfLogTable for the fault. Ports will not be disabled until at least one polling interval after a warning has fired. In addition, the agent may further delay disabling a port in certain situations. For example, it may choose to delay disabling a cascade port to give the cascaded device a chance to correct the problem.
.1.3.6.1.4.1.11.2.14.11.1.7.1.1.5,HP-ICF-FAULT-FINDER-MIB::hpicfFfSpeedReduceTolerance,Integer32,read-write,,current,,The tolerance level used to calculate the speed reduction threshold for this fault type. The value of an instance of this object MUST be greater than the value of the corresponding instance of the hpicfFfWarnTolerance, and  less than or equal to the corresponding instance  of hpicfFfDisablePortTolerance. The agent will only reduce speed on a port if auto-negotiation has been performed, and the  partners link abilities allow operation at a  slower media speed. The agent will periodically check relevant statistics for each port for each type of fault. If the speed reduction threshold has been exceeded, and speed reduction option is enabled for that fault type, an hpicfFaultFinderTrap notification  will be sent. In addition, an entry will be made  in the hpicfFfLogTable for the fault. The agent may elect not to reduce speed or delay speed reduction of certain ports. For example, it may choose to delay taking action on a cascade port to give the cascaded device a chance to correct the problem.
.1.3.6.1.4.1.11.2.14.11.1.7.2,HP-ICF-FAULT-FINDER-MIB::hpicfFfLogTable,,not-accessible,,current,,A log of fault warnings and ports disabled by the Fault Finder.
.1.3.6.1.4.1.11.2.14.11.1.7.2.1,HP-ICF-FAULT-FINDER-MIB::hpicfFfLogEntry,,not-accessible,hpicfFfLogIndex,current,,An entry in the Fault Finder log, containing information about a single fault.
.1.3.6.1.4.1.11.2.14.11.1.7.2.1.1,HP-ICF-FAULT-FINDER-MIB::hpicfFfLogIndex,Integer32,not-accessible,,current,,An arbitrary value which uniquely identifies this log entry. The index for a particular log entry must not change, even though entries with lower valued indices have been deleted.
.1.3.6.1.4.1.11.2.14.11.1.7.2.1.2,HP-ICF-FAULT-FINDER-MIB::hpicfFfLogCreateTime,TimeTicks,read-only,,current,,The value of sysUpTime when this log entry was added to the hpicfFfLogTable.
.1.3.6.1.4.1.11.2.14.11.1.7.2.1.3,HP-ICF-FAULT-FINDER-MIB::hpicfFfLogPhysEntity,Integer32,read-only,,current,,The entPhysicalIndex of the device port or other physical component on which the fault was detected. On agents which do not implement the Entity MIB, this will contain the ifIndex of the offending port.
.1.3.6.1.4.1.11.2.14.11.1.7.2.1.4,HP-ICF-FAULT-FINDER-MIB::hpicfFfLogFaultType,INTEGER,read-only,,current,badDriver(1):badXcvr(2):badCable(3):tooLongCable(4):overBandwidth(5):bcastStorm(6):partition(7):misconfiguredSQE(8):polarityReversal(9):networkLoop(10):lossOfLink(11):portSecurityViolation(12):backupLinkTransition(13):meshingFault(14):fanFault(15):rpsFault(16):stuck10MbFault(17):lossOfStackMember(18):hotSwapReboot(19):duplexMismatchHDX(20):duplexMismatchFDX(21):flowcntlJumbosFault(22):portSelftestFailure(23):xcvrUnidentified(24):xcvrUnsupported(25):crfNotify(26):crfThrottled(27):crfBlocked(28):xcvrNotYetSupported(29):xcvrBRevOnly(30):xcvrNotSupportedOnPort(31):phyReadFailure(32):linkFlap(33):intel82566dmportprotect(34):xcvrExceedQty(35):xcvrClone(36):xcvrCloneReminder(37),The type of fault which was detected on the physical entity indicated by hpicfFfLogPhysEntity.
.1.3.6.1.4.1.11.2.14.11.1.7.2.1.5,HP-ICF-FAULT-FINDER-MIB::hpicfFfLogAction,INTEGER,read-only,,current,none(1):warn(2):warnAndDisable(3):warnAndSpeedReduce(4):warnAndSpeedReduceAndDisable(5),The action, if any, that was taken by the agent when this fault was detected.
.1.3.6.1.4.1.11.2.14.11.1.7.2.1.6,HP-ICF-FAULT-FINDER-MIB::hpicfFfLogSeverity,INTEGER,read-only,,current,informational(1):medium(2):critical(3),The severity level of the fault. Port disables will always be logged as 'critical'. An agent may need to remove faults from the fault log in order to reclaim resources. If so, it must remove lower severity faults before removing higher severity faults. Faults at the same severity level should be removed from oldest to newest.
.1.3.6.1.4.1.11.2.14.11.1.7.2.1.7,HP-ICF-FAULT-FINDER-MIB::hpicfFfLogStatus,INTEGER,read-write,,current,new(1):active(2):old(3),Log entries will initially be created with the value 'new'. A manager cannot set this object to 'new'. Setting this object to 'active' indicates that the fault has been displayed to a user. Setting this object to 'old' indicates that the agent should remove this fault from the log.
.1.3.6.1.4.1.11.2.14.11.1.7.2.1.8,HP-ICF-FAULT-FINDER-MIB::hpicfFfLogPhysClass,INTEGER,read-only,,current,other(1):unknown(2):chassis(3):backplane(4):container(5):powerSupply(6):fan(7):sensor(8):module(9):port(10):stack(11):cpu(12),The PhysicalClass as defined by Entity MIB to 
.1.3.6.1.4.1.11.2.14.11.1.7.2.1.9,HP-ICF-FAULT-FINDER-MIB::hpicfFfLogInfoType,INTEGER,read-only,,current,ipv4Address(1):displayString(2),This field can be used to indicate the class of 
.1.3.6.1.4.1.11.2.14.11.1.7.2.1.10,HP-ICF-FAULT-FINDER-MIB::hpicfFfLogInfo,OCTET,read-only,,current,,This can be used to hold any relevant information 
.1.3.6.1.4.1.11.2.14.11.1.7.3,HP-ICF-FAULT-FINDER-MIB::hpicfFfFaultInfoURL,OCTET,accessible-for-notify,,current,,A URL which a management station can use to access additional information about the fault which triggered the notification in which this object was sent.
.1.3.6.1.4.1.11.2.14.11.1.7.4,HP-ICF-FAULT-FINDER-MIB::hpicfFfFaultLightStatus,INTEGER,read-only,,current,faultLightOff(1):faultLightOn(2),This indicates the current state of the switch fault light. Examples of faults that could cause the LED to be turned on include fan, power supply, and port link failures.
.1.3.6.1.4.1.11.2.14.11.1.8,HP-SNTPclientConfiguration-MIB::hpSntpConfigMod,,,,,,Management information for configuring the SNTP client on Hewlett-Packard network devices.
.1.3.6.1.4.1.11.2.14.11.1.8.1,HP-SNTPclientConfiguration-MIB::hpSntpConfig,,,,,,
.1.3.6.1.4.1.11.2.14.11.1.8.1.1,HP-SNTPclientConfiguration-MIB::hpSntpConfigMode,INTEGER,read-write,,current,disabled(1):unicast(2):broadcast(3):dhcp(4),Current operational mode of SNTP client
.1.3.6.1.4.1.11.2.14.11.1.8.1.2,HP-SNTPclientConfiguration-MIB::hpSntpConfigPollInterval,Integer32,read-write,,current,,Period of time (in seconds) between successive attempts to perform an update via SNTP
.1.3.6.1.4.1.11.2.14.11.1.8.1.3,HP-SNTPclientConfiguration-MIB::hpSntpConfigServerTable,,not-accessible,,deprecated,,### DEPRECATED ### A table containing trusted SNTP servers  to be queried in unicast mode
.1.3.6.1.4.1.11.2.14.11.1.8.1.3.1,HP-SNTPclientConfiguration-MIB::hpSntpServerEntry,,not-accessible,hpSntpServerAddress,deprecated,,### DEPRECATED ### A trusted server and its expected version  number
.1.3.6.1.4.1.11.2.14.11.1.8.1.3.1.1,HP-SNTPclientConfiguration-MIB::hpSntpServerAddress,IpAddress,not-accessible,,deprecated,,### DEPRECATED ### Ip Address of a trusted SNTP server.
.1.3.6.1.4.1.11.2.14.11.1.8.1.3.1.2,HP-SNTPclientConfiguration-MIB::hpSntpServerVersion,Integer32,read-create,,deprecated,,### DEPRECATED ### Protocol version used by this SNTP server
.1.3.6.1.4.1.11.2.14.11.1.8.1.3.1.3,HP-SNTPclientConfiguration-MIB::hpSntpServerPriority,Integer32,read-create,,deprecated,,### DEPRECATED ### Priority given to this server.
.1.3.6.1.4.1.11.2.14.11.1.8.1.3.1.4,HP-SNTPclientConfiguration-MIB::hpSntpServerRowStatus,INTEGER,read-create,,deprecated,active(1):notInService(2):notReady(3):createAndGo(4):createAndWait(5):destroy(6),### DEPRECATED ### The Status of this SNTP server information.
.1.3.6.1.4.1.11.2.14.11.1.8.1.4,HP-SNTPclientConfiguration-MIB::hpSntpInetConfigServerTable,,not-accessible,,current,,A table containing trusted IPv4 and IPv6 SNTP servers to be  queried in unicast mode
.1.3.6.1.4.1.11.2.14.11.1.8.1.4.1,HP-SNTPclientConfiguration-MIB::hpSntpInetServerEntry,,not-accessible,hpSntpInetServerPriority:hpSntpInetServerAddressType:hpSntpInetServerAddress,current,,A trusted server and its expected version number and priority
.1.3.6.1.4.1.11.2.14.11.1.8.1.4.1.1,HP-SNTPclientConfiguration-MIB::hpSntpInetServerPriority,Integer32,not-accessible,,current,,Priority given to this server.
.1.3.6.1.4.1.11.2.14.11.1.8.1.4.1.2,HP-SNTPclientConfiguration-MIB::hpSntpInetServerAddressType,INTEGER,not-accessible,,current,unknown(0):ipv4(1):ipv6(2):ipv4z(3):ipv6z(4):dns(16),Ip Address type of a trusted SNTP server.
.1.3.6.1.4.1.11.2.14.11.1.8.1.4.1.3,HP-SNTPclientConfiguration-MIB::hpSntpInetServerAddress,OCTET,not-accessible,,current,,Ip Address (of a trusted SNTP server) to which this entry's addressing information pertains. hpSntpInetServerAddress is  always interpreted within the context of  hpSntpInetServerAddressType
.1.3.6.1.4.1.11.2.14.11.1.8.1.4.1.4,HP-SNTPclientConfiguration-MIB::hpSntpInetServerVersion,Integer32,read-create,,current,,Protocol version used by this SNTP server
.1.3.6.1.4.1.11.2.14.11.1.8.1.4.1.5,HP-SNTPclientConfiguration-MIB::hpSntpInetServerRowStatus,INTEGER,read-create,,current,active(1):notInService(2):notReady(3):createAndGo(4):createAndWait(5):destroy(6),The Status of this SNTP server information.
.1.3.6.1.4.1.11.2.14.11.1.8.1.4.1.6,HP-SNTPclientConfiguration-MIB::hpSntpInetServerIsOobm,INTEGER,read-create,,current,true(1):false(2),This object indicates whether this SNTP Server is reachable over OOBM (Out Of Band Management) interface or not. This mib object will be applicable only if there is a physical OOBM port on the device.
.1.3.6.1.4.1.11.2.14.11.1.8.1.4.1.7,HP-SNTPclientConfiguration-MIB::hpSntpInetServerAuthKeyId,Unsigned32,read-create,,current,,The key identifier associated with the SNTP server specified by this instance.Its an index to the hpSntpAuthenticationKeyTable.The value identifies  the row in the hpSntpAuthenticationKeyTable where the  authentication key can be found. The value '0' indicates that the key Id is disassociated from the SNTP server.
.1.3.6.1.4.1.11.2.14.11.1.8.1.5,HP-SNTPclientConfiguration-MIB::hpSntpAuthentication,INTEGER,read-write,,current,enabled(1):disabled(2),This object is used to enable or disable SNTP  authentication in the switch.By default authentication  is disabled.Atleast one Key-id and it has to be trusted to enable authentication.
.1.3.6.1.4.1.11.2.14.11.1.8.1.6,HP-SNTPclientConfiguration-MIB::hpSntpAuthenticationKeyTable,,not-accessible,,current,,A table containing entries of authentication key-id. The number of Key-id is restricted to 8 currently.
.1.3.6.1.4.1.11.2.14.11.1.8.1.6.1,HP-SNTPclientConfiguration-MIB::hpSntpAuthenticationKeyEntry,,not-accessible,hpSntpAuthenticationKeyId,current,,An authentication key entry comprising key-identifiers  such as key-id, key-value, authentication mode(MD5), and status of the key-id if it is trusted or not.
.1.3.6.1.4.1.11.2.14.11.1.8.1.6.1.1,HP-SNTPclientConfiguration-MIB::hpSntpAuthenticationKeyId,Unsigned32,not-accessible,,current,,A unique identifier for the authentication key.
.1.3.6.1.4.1.11.2.14.11.1.8.1.6.1.2,HP-SNTPclientConfiguration-MIB::hpSntpAuthenticationKeyAuthMode,INTEGER,read-create,,current,none(1):md5(2),The authentication mode supported for this key.
.1.3.6.1.4.1.11.2.14.11.1.8.1.6.1.3,HP-SNTPclientConfiguration-MIB::hpSntpAuthenticationKeyValue,OCTET,read-create,,current,,A unique string that serves as the key-value for generating  the message digest sent in the SNTP packet. A read on  this object will return a Empty string.
.1.3.6.1.4.1.11.2.14.11.1.8.1.6.1.4,HP-SNTPclientConfiguration-MIB::hpSntpAuthenticationKeyTrusted,INTEGER,read-create,,current,true(1):false(2),This object is used to configure the status of the  authentication key as trusted.If the key-value is not trusted then the packet is not trusted. By default the key-value is not trusted.
.1.3.6.1.4.1.11.2.14.11.1.8.1.6.1.5,HP-SNTPclientConfiguration-MIB::hpSntpAuthenticationKeyRowStatus,INTEGER,read-create,,current,active(1):notInService(2):notReady(3):createAndGo(4):createAndWait(5):destroy(6),The row status for this SNTP authentication key instance. The Key-id is the index and  it cannot be edited.
.1.3.6.1.4.1.11.2.14.11.1.8.1.6.1.6,HP-SNTPclientConfiguration-MIB::hpSntpAuthenticationKeyEncrypted,OCTET,read-create,,current,,The encrypted form of a unique string that serves as the key-value for generating the message digest sent in the SNTP packet. This object may only be read or written when hpSwitchAuthenticationEncryptCredentialsMethod is set to a value other than none(0). At most one of hpSntpAuthenticationKey and hpSntpAuthenticationKeyEncrypted may be set in any transaction. This object should only be written with an encrypted key previously read from a compatible HP Networking device.
.1.3.6.1.4.1.11.2.14.11.1.8.1.7,HP-SNTPclientConfiguration-MIB::hpSntpServerStatisticsTable,,not-accessible,,current,,A table containing a list of statistics entries per SNTP server.
.1.3.6.1.4.1.11.2.14.11.1.8.1.7.1,HP-SNTPclientConfiguration-MIB::hpSntpServerStatisticsEntry,,not-accessible,,current,,A statistics entry per SNTP server.
.1.3.6.1.4.1.11.2.14.11.1.8.1.7.1.1,HP-SNTPclientConfiguration-MIB::hpSntpServerStatisticsAuthFailedPkts,Counter32,read-only,,current,,This object indicates the number of packets that have failed the authentication check with  this server instance.
.1.3.6.1.4.1.11.2.14.11.1.8.1.8,HP-SNTPclientConfiguration-MIB::hpSntpBroadcastServerTable,,not-accessible,,current,,A table containing a SNTP broadcast server and statistics information.
.1.3.6.1.4.1.11.2.14.11.1.8.1.8.1,HP-SNTPclientConfiguration-MIB::hpSntpBroadcastServerEntry,,not-accessible,hpSntpBroadcastServerAddress,current,,An entry comprising a preferred broadcast server address and statistics information with respect to server.
.1.3.6.1.4.1.11.2.14.11.1.8.1.8.1.1,HP-SNTPclientConfiguration-MIB::hpSntpBroadcastServerAddress,IpAddress,not-accessible,,current,,IP Address of a preferred broadcast SNTP server.
.1.3.6.1.4.1.11.2.14.11.1.8.1.8.1.2,HP-SNTPclientConfiguration-MIB::hpSntpBroadcastServerStatisticsAuthFailedPkts,Counter32,read-only,,current,,This object indicates the number of packets that have failed the authentication check with this server instance.
.1.3.6.1.4.1.11.2.14.11.1.8.2,HP-SNTPclientConfiguration-MIB::hpTimeSyncMethodMod,,,,,,
.1.3.6.1.4.1.11.2.14.11.1.8.2.1,HP-SNTPclientConfiguration-MIB::hpTimeSyncMethod,INTEGER,read-write,,current,none(1):sntp(2):timep(3):timepOrSntp(4):ntp(5),Method to be used for time synchronization.
.1.3.6.1.4.1.11.2.14.11.1.8.3,HP-SNTPclientConfiguration-MIB::hpSntpConfigConformance,,,,,,
.1.3.6.1.4.1.11.2.14.11.1.8.3.1,HP-SNTPclientConfiguration-MIB::hpSntpConfigCompliances,,,,,,
.1.3.6.1.4.1.11.2.14.11.1.8.3.1.1,HP-SNTPclientConfiguration-MIB::hpSntpConfigCompliance,,,,,,###DEPRECATED###The compliance statement for devices  implementing the hpSntpConfig MIB.
.1.3.6.1.4.1.11.2.14.11.1.8.3.1.2,HP-SNTPclientConfiguration-MIB::hpSntpInetConfigCompliance,,,,,,The compliance statement for devices implementing the hpSntpConfig MIB.
.1.3.6.1.4.1.11.2.14.11.1.8.3.1.3,HP-SNTPclientConfiguration-MIB::hpSntpAuthenticationConfigCompliance,,,,,,### DEPRECATED ### The compliance statement for devices implementing the hpSntpConfig MIB.
.1.3.6.1.4.1.11.2.14.11.1.8.3.1.4,HP-SNTPclientConfiguration-MIB::hpSntpInetConfigComplianceOobm,,,,,,The compliance statement for devices implementing the HP SNTP MIB with OOBM support
.1.3.6.1.4.1.11.2.14.11.1.8.3.1.5,HP-SNTPclientConfiguration-MIB::hpSntpAuthenticationConfigCompliance1,,,,,,The compliance statement for devices implementing the hpSntpConfig MIB.
.1.3.6.1.4.1.11.2.14.11.1.8.3.1.6,HP-SNTPclientConfiguration-MIB::hpSntpBroadcastServerCompliance,,,,,,The compliance statement for devices implementing the HP SNTP broadcast server support
.1.3.6.1.4.1.11.2.14.11.1.8.3.2,HP-SNTPclientConfiguration-MIB::hpSntpConfigGroups,,,,,,
.1.3.6.1.4.1.11.2.14.11.1.8.3.2.1,HP-SNTPclientConfiguration-MIB::hpSntpConfigGroup,,,,,,A collection of objects for configuring the SNTP client.
.1.3.6.1.4.1.11.2.14.11.1.8.3.2.2,HP-SNTPclientConfiguration-MIB::hpSntpServerConfigGroup,,,,,,### DEPRECATED ###This Group defines a server table entry.
.1.3.6.1.4.1.11.2.14.11.1.8.3.2.3,HP-SNTPclientConfiguration-MIB::hpTimeSyncMethodGroup,,,,,,A collection of objects for selecting a time synchronization protocol to use.
.1.3.6.1.4.1.11.2.14.11.1.8.3.2.4,HP-SNTPclientConfiguration-MIB::hpSntpInetServerConfigGroup,,,,,,This Group defines a server table entry.
.1.3.6.1.4.1.11.2.14.11.1.8.3.2.5,HP-SNTPclientConfiguration-MIB::hpSntpAuthenticationKeyIdConfigGroup,,,,,,### DEPRECATED ### This group defines SNTP authentication related information. It includes Key-Identifier, Key-Value, flag to indicate whether the information is trusted or not and authentication mode(MD5) currently supported.
.1.3.6.1.4.1.11.2.14.11.1.8.3.2.6,HP-SNTPclientConfiguration-MIB::hpSntpInetServerOobmGroup,,,,,,A collection of objects for configuring the SNTP server entry with support for OOBM (Out of Band Management) interface.
.1.3.6.1.4.1.11.2.14.11.1.8.3.2.7,HP-SNTPclientConfiguration-MIB::hpSntpAuthenticationKeyIdConfigGroup1,,,,,,This group defines SNTP authentication related information. It includes Key-Identifier, Key-Value, encrypted key value, flag to indicate whether the information is trusted or not and authentication mode(MD5) currently supported.
.1.3.6.1.4.1.11.2.14.11.1.8.3.2.8,HP-SNTPclientConfiguration-MIB::hpSntpBroadcastServerGroup,,,,,,A collection of objects for preferred SNTP broadcast server and statistics.
.1.3.6.1.4.1.11.2.14.11.1.8.4,HP-SNTPclientConfiguration-MIB::hpSntpStatistics,,,,,,
.1.3.6.1.4.1.11.2.14.11.1.8.4.1,HP-SNTPclientConfiguration-MIB::hpSntpStatsRcvdPkts,Counter32,read-only,,current,,Total number of packets received.
.1.3.6.1.4.1.11.2.14.11.1.8.4.2,HP-SNTPclientConfiguration-MIB::hpSntpStatsSentPkts,Counter32,read-only,,current,,Total number of packets sent to the server
.1.3.6.1.4.1.11.2.14.11.1.8.4.3,HP-SNTPclientConfiguration-MIB::hpSntpStatsDroppedPkts,Counter32,read-only,,current,,Total number of packets dropped due to error.
.1.3.6.1.4.1.11.2.14.11.1.9,HP-ICF-OID::hpicfPOE,,,,,,
.1.3.6.1.4.1.11.2.14.11.1.9.1,HP-ICF-POE-MIB::hpicfPoe,,,,,,This MIB module describes management objects that manage Power Source Equipment (PSE).
.1.3.6.1.4.1.11.2.14.11.1.9.1.1,HP-ICF-POE-MIB::hpicfPoePethPsePortTable,,not-accessible,,current,,This table supplements the table 'pethPsePortTable' in ieee802af.mib.
.1.3.6.1.4.1.11.2.14.11.1.9.1.1.1,HP-ICF-POE-MIB::hpicfPoePethPsePortEntry,,not-accessible,,current,,The fields in these entries will be used to supplement fields in 'pethPsePortEntry in ieee802af.mib.
.1.3.6.1.4.1.11.2.14.11.1.9.1.1.1.1,HP-ICF-POE-MIB::hpicfPoePethPsePortCurrent,Integer32,read-only,,current,,This field specifies the current supplied at this port. This value is specified in milli amperes(mA).
.1.3.6.1.4.1.11.2.14.11.1.9.1.1.1.2,HP-ICF-POE-MIB::hpicfPoePethPsePortVoltage,Integer32,read-only,,current,,This field specifies the Voltage supplied at this port. This value is specified in 10's of volts (dV)
.1.3.6.1.4.1.11.2.14.11.1.9.1.1.1.3,HP-ICF-POE-MIB::hpicfPoePethPsePortPower,Integer32,read-only,,current,,This field specifies the Power supplied at this port. This value is specified in milliwatts (mW).
.1.3.6.1.4.1.11.2.14.11.1.9.1.1.1.4,HP-ICF-POE-MIB::hpicfPoePethPsePortPowerAllocateBy,INTEGER,read-write,,current,usage(1):class(2):value(3),This field specifies the power allocation method for this port. The default value is usage.
.1.3.6.1.4.1.11.2.14.11.1.9.1.1.1.5,HP-ICF-POE-MIB::hpicfPoePethPsePortPowerValue,Integer32,read-write,,current,,This field specifies the power allocation defined for this port. This value is specified in Watts (W).
.1.3.6.1.4.1.11.2.14.11.1.9.1.1.1.6,HP-ICF-POE-MIB::hpicfPoePethPsePortLLDPDetect,INTEGER,read-write,,current,disabled(1):enabled(2),This field specifies if power should be allocated using LLDP advertised information regarding the PD.
.1.3.6.1.4.1.11.2.14.11.1.9.1.1.1.7,HP-ICF-POE-MIB::hpicfPoePethPsePortPoePlusPowerValue,Integer32,read-write,,current,,This field specifies the power allocation defined for this port. Use this object for equipment supporting high power, that is greater than 15 Watts. This value is specified in Watts (W).  Maximum supported is 33W
.1.3.6.1.4.1.11.2.14.11.1.9.1.1.1.8,HP-ICF-POE-MIB::hpicfPoePethPsePortActualPower,Integer32,read-only,,current,,This field specifies the actual power drained by the device connected to this port.
.1.3.6.1.4.1.11.2.14.11.1.9.1.1.1.9,HP-ICF-POE-MIB::hpicfPoePethPsePortOperStatus,INTEGER,read-only,,current,deny(1):off(2):on(3),This field specifies the operational status of the port
.1.3.6.1.4.1.11.2.14.11.1.9.1.1.1.10,HP-ICF-POE-MIB::hpicfPoePethPsePortPowerMode,INTEGER,read-only,,current,enable(1):disable(2):disableWithFiber(6),This field specifies the power mode of the port whether enabled or disabled or disableWithFiber
.1.3.6.1.4.1.11.2.14.11.1.9.1.1.1.11,HP-ICF-POE-MIB::hpicfPoePethPsePortAveragePower,Integer32,read-only,,current,,This field specifies the average power supplied to this port which is used by the device connected to it.
.1.3.6.1.4.1.11.2.14.11.1.9.1.1.1.12,HP-ICF-POE-MIB::hpicfPoePethPsePortPeakPower,Integer32,read-only,,current,,This field specifies the peak power supplied to this port which is used by the device connected to it.
.1.3.6.1.4.1.11.2.14.11.1.9.1.1.1.13,HP-ICF-POE-MIB::hpicfPoePethPsePortPreStdDetect,INTEGER,read-write,,current,off(1):on(2),This field specifies the pre standard detect status  for this port. A value of On - indicates that power  pre-802.3af-standard devices. A value of Off - indicates that only  pre-802.3af/at compliant devices are allowed. The default value is Off.
.1.3.6.1.4.1.11.2.14.11.1.9.1.1.1.14,HP-ICF-POE-MIB::hpicfPoePethPsePortLowPriority,INTEGER,read-only,,current,low(1):high(2),This object indicates whether a particular port shuts down in the event of any PSU failure in the system. A value of (1) indicates a low priority port which shuts down in the event of any PSU failure. A value of (2) indicates a high priority port which  is unaffected by the failure of any single PSU.  The default value is high.
.1.3.6.1.4.1.11.2.14.11.1.9.1.2,HP-ICF-POE-MIB::hpicfPoeConformance,,,,,,
.1.3.6.1.4.1.11.2.14.11.1.9.1.2.1,HP-ICF-POE-MIB::hpicfPoeCompliances,,,,,,
.1.3.6.1.4.1.11.2.14.11.1.9.1.2.1.1,HP-ICF-POE-MIB::hpicfPoeCompliance,,,,,, A compliance statement for HP Routing switches with PoE  capability
.1.3.6.1.4.1.11.2.14.11.1.9.1.2.1.2,HP-ICF-POE-MIB::hpicfPoeCompliance1,,,,,, A compliance statement for HP Routing switches with PoE  capability
.1.3.6.1.4.1.11.2.14.11.1.9.1.2.1.3,HP-ICF-POE-MIB::hpicfPoeCompliance2,,,,,, A compliance statement for HP Routing switches with PoE capability
.1.3.6.1.4.1.11.2.14.11.1.9.1.2.1.4,HP-ICF-POE-MIB::hpicfPoeCompliance3,,,,,, A compliance statement for HP Routing switches with PoE capability
.1.3.6.1.4.1.11.2.14.11.1.9.1.2.1.5,HP-ICF-POE-MIB::hpicfPoeCompliance4,,,,,, A compliance statement for HP Routing switches with PoE capability
.1.3.6.1.4.1.11.2.14.11.1.9.1.2.1.6,HP-ICF-POE-MIB::hpicfPoeCompliance5,,,,,, A compliance statement for HP Routing switches with PoE capability
.1.3.6.1.4.1.11.2.14.11.1.9.1.2.2,HP-ICF-POE-MIB::hpicfPoeGroups,,,,,,
.1.3.6.1.4.1.11.2.14.11.1.9.1.2.2.1,HP-ICF-POE-MIB::hpicfPoePethPsePortTableGroup,,,,,,A collection of objects allowing configuration of PoE PSE Port table
.1.3.6.1.4.1.11.2.14.11.1.9.1.2.2.2,HP-ICF-POE-MIB::hpicfPoeGlobalGroup,,,,,,A collection of objects related to the global configuration of POE on a given chassis.
.1.3.6.1.4.1.11.2.14.11.1.9.1.2.2.3,HP-ICF-POE-MIB::hpicfPseFeaturesGroup,,,,,,A Collection of Object(s) that provide information about each power source equipment instance.
.1.3.6.1.4.1.11.2.14.11.1.9.1.2.2.4,HP-ICF-POE-MIB::hpicfPoePowerSupplyGroup,,,,,, A collection of objects related to Power Supply. 
.1.3.6.1.4.1.11.2.14.11.1.9.1.2.2.5,HP-ICF-POE-MIB::hpicfPoePethPseOperStateTableGroup,,,,,, A collection of objects related to Power Supply. 
.1.3.6.1.4.1.11.2.14.11.1.9.1.2.2.6,HP-ICF-POE-MIB::hpicfPoePethPsePowerTableGroup,,,,,, A collection of objects related to Power Usage parameters. 
.1.3.6.1.4.1.11.2.14.11.1.9.1.2.2.7,HP-ICF-POE-MIB::hpicfPoePowerUsageGlobalGroup,,,,,, A collection of objects related to Power Usage parameters Globally. 
.1.3.6.1.4.1.11.2.14.11.1.9.1.2.2.8,HP-ICF-POE-MIB::hpicfPseParamsGroup,,,,,,A Collection of Object(s) that provide information about each power source equipment instance.
.1.3.6.1.4.1.11.2.14.11.1.9.1.2.2.9,HP-ICF-POE-MIB::hpicfPoePethPsePortPreStdDetectGroup,,,,,,A collection of objects related to port pre std detect status. 
.1.3.6.1.4.1.11.2.14.11.1.9.1.2.2.10,HP-ICF-POE-MIB::hpicfPoeAuxPowerSupplyGroup,,,,,,A collection of objects providing information about auxiliary power supply. 
.1.3.6.1.4.1.11.2.14.11.1.9.1.2.2.11,HP-ICF-POE-MIB::hpicfPoeLowPowerPortGroup,,,,,,A collection of objects providing information about low priority ports. 
.1.3.6.1.4.1.11.2.14.11.1.9.1.3,HP-ICF-POE-MIB::hpicfPoeAllowPreStdDetect,INTEGER,read-write,,deprecated,true(1):false(2),This object is used to configure the default POE power detection mode. A value of TRUE - indicates that power  pre-802.3af-standard devices. A value of FALSE - indicates that only  pre-802.3af compliant devices are allowed. The default value is true. In a stack, this value pertains only to the commander switch.
.1.3.6.1.4.1.11.2.14.11.1.9.1.4,HP-ICF-POE-MIB::hpicfPoePowerRedundancy,INTEGER,read-write,,deprecated,none(1):nPlus1(2):full(3),This object is used to configure the POE power redundancy mode. A value of none(1) - means that all available power can be allocated to powered devices. A value of nPlus1(2) - means that one of the highest power supplies is held in reserve and that in the event of a single power supply failure, no  no powered devices will be shut down. A value of full(3) - means that half of the available power supplies are held in reserve. The default value is none(1). In a stack, this value pertains only to the commander switch.
.1.3.6.1.4.1.11.2.14.11.1.9.1.5,HP-ICF-POE-MIB::hpicfPoeExtPwrSupplyCount,Integer32,read-write,,deprecated,,This object is used to configure the number of external power supplies expected to be connected to the chassis. The default value is 1. In a stack, this value pertains only to the commander switch.
.1.3.6.1.4.1.11.2.14.11.1.9.1.6,HP-ICF-POE-MIB::hpicfPseFeaturesTable,,not-accessible,,current,,This table describes the features of each power source equipment (PSE). On standalone switches (both stackable and chassis switches) there shall be only one entry in this table. In a stack, there shall be one entry for each stack member.
.1.3.6.1.4.1.11.2.14.11.1.9.1.6.1,HP-ICF-POE-MIB::hpicfPseFeaturesEntry,,not-accessible,entPhysicalIndex,current,,A row in the PSE features table, signifying a single power source equipment.
.1.3.6.1.4.1.11.2.14.11.1.9.1.6.1.1,HP-ICF-POE-MIB::hpicfPseAllowPreStdDetect,INTEGER,read-write,,deprecated,true(1):false(2),This object is used to configure the default POE power detection mode for this power source equipment. A value of TRUE - indicates that power pre-802.3af-standard devices. A value of FALSE - indicates that only pre-802.3af compliant devices are allowed. The default value is true.
.1.3.6.1.4.1.11.2.14.11.1.9.1.6.1.2,HP-ICF-POE-MIB::hpicfPsePowerRedundancy,INTEGER,read-write,,current,none(1):nPlus1(2):full(3),This object is used to configure the POE power redundancy mode for this power source equipment. A value of none(1) - means that all available power can be allocated to powered devices. A value of nPlus1(2) - means that one of the highest power supplies is held in reserve and that in the event of a single power supply failure, no powered devices will be shut down. A value of full(3) - means that half of the available power supplies are held in reserve. The default value is none(1).
.1.3.6.1.4.1.11.2.14.11.1.9.1.6.1.3,HP-ICF-POE-MIB::hpicfPseExtPwrSupplyCount,Integer32,read-write,,current,,This object is used to configure the number of external power supplies expected to be connected to the Power Source Equipment. The default value is 1.
.1.3.6.1.4.1.11.2.14.11.1.9.1.6.1.4,HP-ICF-POE-MIB::hpicfPseAvailablePower,Integer32,read-only,,current,,This field specifies the total power available on this Power source equipment. This includes internal and external power supplies.
.1.3.6.1.4.1.11.2.14.11.1.9.1.6.1.5,HP-ICF-POE-MIB::hpicfPseUsedPower,Integer32,read-only,,current,,This field specifies the total power allocated on the Power Source Equipment. This is the sum of the power allocated to all the ports on the PSE.
.1.3.6.1.4.1.11.2.14.11.1.9.1.6.1.6,HP-ICF-POE-MIB::hpicfPseFailoverPower,Integer32,read-only,,current,,This field specifies the failover power for this Power Source Equipment.
.1.3.6.1.4.1.11.2.14.11.1.9.1.6.1.7,HP-ICF-POE-MIB::hpicfPseRedundantPower,Integer32,read-only,,current,,This field specifies the redundancy POE power available to the Power Source Equipment.
.1.3.6.1.4.1.11.2.14.11.1.9.1.7,HP-ICF-POE-MIB::hpicfPoePowerSupplyTable,,not-accessible,,current,,This table contains one row per power supply available  to the switch.
.1.3.6.1.4.1.11.2.14.11.1.9.1.7.1,HP-ICF-POE-MIB::hpicfPoePowerSupplyEntry,,not-accessible,entPhysicalIndex,current,,Information about a particular power supply. Each entry  provides information about power supply whether it is  external or internal, if it is poe/poePlus and the  capacity of the power supply.
.1.3.6.1.4.1.11.2.14.11.1.9.1.7.1.1,HP-ICF-POE-MIB::hpicfPoePowerSupplySourceType,INTEGER,read-only,,current,internal(1):external(2),This field specifies whether the power supply is external or internal. Stackable switch has inbuilt power supply and can have upto 1 external power supply. Chassis switch can have upto 2 internal power supplies for 6 slot and upto 4 for 12 slot. Chassis switch can have upto 2 external power supplies.
.1.3.6.1.4.1.11.2.14.11.1.9.1.7.1.2,HP-ICF-POE-MIB::hpicfPoePowerSupplyType,INTEGER,read-only,,current,poe(1):poePlus(2):notPresent(3):fault(4):auxFault(5),This field specifies the type of the power supply, poe or poePlus.
.1.3.6.1.4.1.11.2.14.11.1.9.1.7.1.3,HP-ICF-POE-MIB::hpicfPoePowerSupplyCapacity,Integer32,read-only,,current,,This field specifies the capacity of the power supply.
.1.3.6.1.4.1.11.2.14.11.1.9.1.7.1.4,HP-ICF-POE-MIB::hpicfPoePowerSupplyAuxCapacity,Integer32,read-only,,current,,This MIB object specifies the capacity of the auxiliary power supply. The power supplies other than the model J9830A returns the value NULL.
.1.3.6.1.4.1.11.2.14.11.1.9.1.8,HP-ICF-POE-MIB::hpicfPoePethPseOperStateTable,,not-accessible,,current,,This table supplements the table 'pethPsePortTable' in ieee802af.mib.
.1.3.6.1.4.1.11.2.14.11.1.9.1.8.1,HP-ICF-POE-MIB::hpicfPoePethPseOperStateEntry,,not-accessible,,current,,The fields in these entries will be used to supplement fields in 'pethPsePortEntry in ieee802af.mib.
.1.3.6.1.4.1.11.2.14.11.1.9.1.8.1.1,HP-ICF-POE-MIB::hpicfPoePethPseOperState,INTEGER,read-only,,current,poeOn(1):poePlusOn(2):off(3):fault(4),This field specifies the operation status. The default value is on.
.1.3.6.1.4.1.11.2.14.11.1.9.1.8.1.2,HP-ICF-POE-MIB::hpicfPoePethPsePortNum,Integer32,read-only,,current,,This field specifies the port number.
.1.3.6.1.4.1.11.2.14.11.1.9.1.9,HP-ICF-POE-MIB::hpicfPoeMaxGuaranteedPower,Integer32,read-only,,current,,This field specifies the guaranteed maximum PoE power, namely, the maximum power supplied to critical PSEs
.1.3.6.1.4.1.11.2.14.11.1.9.1.10,HP-ICF-POE-MIB::hpicfPoeRemainingGuaranteedPower,Integer32,read-only,,current,,This field specifies the Remaining Guaranteed power. This is difference of Guaranteed Maximum PoE Power and  the sum of maximum power of critical PSEs 
.1.3.6.1.4.1.11.2.14.11.1.9.1.11,HP-ICF-POE-MIB::hpicfPoePethPsePowerTable,,not-accessible,,current,,This table supplements the table 'pethPsePortTable' in ieee802af.mib.
.1.3.6.1.4.1.11.2.14.11.1.9.1.11.1,HP-ICF-POE-MIB::hpicfPoePethPsePowerEntry,,not-accessible,,current,,The fields in these entries will be used to supplement fields in pethPsePortEntry in ieee802af.mib.
.1.3.6.1.4.1.11.2.14.11.1.9.1.11.1.1,HP-ICF-POE-MIB::hpicfPoePethPsePeakPower,Integer32,read-only,,current,,This field specifies the peak power of the PSE.
.1.3.6.1.4.1.11.2.14.11.1.9.1.11.1.2,HP-ICF-POE-MIB::hpicfPoePethPseAvgPower,Integer32,read-only,,current,,This field specifies the average power of the PSE.
.1.3.6.1.4.1.11.2.14.11.1.9.1.11.1.3,HP-ICF-POE-MIB::hpicfPoePethPseRemGrntPower,Integer32,read-only,,current,,Guaranteed remaining power of PSEs
.1.3.6.1.4.1.11.2.14.11.1.10,HP-ICF-IPCONFIG::hpicfIpConfig,,,,,,This MIB module describes objects for basic IP address configuration and interface configuration for devices in the HP Integrated Communication Facility product line.
.1.3.6.1.4.1.11.2.14.11.1.10.1,HP-ICF-IPCONFIG::hpicfIpConfigObjects,,,,,,
.1.3.6.1.4.1.11.2.14.11.1.10.1.1,HP-ICF-IPCONFIG::hpicfIpAddressObjects,,,,,,
.1.3.6.1.4.1.11.2.14.11.1.10.1.1.1,HP-ICF-IPCONFIG::hpicfIpAddressTable,,not-accessible,,current,,This table contains manually configured IPv4 and IPv6  addresses for each interface. An entry in this table may not exist in the active state unless all objects in the entry are consistent. In particular, the value of hpicfIpAddressPrefixLength.
.1.3.6.1.4.1.11.2.14.11.1.10.1.1.1.1,HP-ICF-IPCONFIG::hpicfIpAddressEntry,,not-accessible,ifIndex:hpicfIpAddressAddrType:hpicfIpAddressAddr,current,,An entry in the hpicfIpAddressEntry contains a single  manually configured IP address.
.1.3.6.1.4.1.11.2.14.11.1.10.1.1.1.1.1,HP-ICF-IPCONFIG::hpicfIpAddressAddrType,INTEGER,not-accessible,,current,unknown(0):ipv4(1):ipv6(2):ipv4z(3):ipv6z(4):dns(16),Type of IP address
.1.3.6.1.4.1.11.2.14.11.1.10.1.1.1.1.2,HP-ICF-IPCONFIG::hpicfIpAddressAddr,OCTET,not-accessible,,current,,The IP address to which this entry's addressing information pertains. hpicfIpAddressAddr is always interpreted within the  context of hpicfIpAddressAddrType.
.1.3.6.1.4.1.11.2.14.11.1.10.1.1.1.1.3,HP-ICF-IPCONFIG::hpicfIpAddressPrefixLength,Unsigned32,read-create,,current,,The prefix length associated with IP address.
.1.3.6.1.4.1.11.2.14.11.1.10.1.1.1.1.4,HP-ICF-IPCONFIG::hpicfIpAddressType,INTEGER,read-create,,current,unicast(1):anycast(2),IP address type. For V4 addresses the value will be  unicast.
.1.3.6.1.4.1.11.2.14.11.1.10.1.1.1.1.5,HP-ICF-IPCONFIG::hpicfIpAddressRowStatus,INTEGER,read-create,,current,active(1):notInService(2):notReady(3):createAndGo(4):createAndWait(5):destroy(6),The status of the IP address entry.
.1.3.6.1.4.1.11.2.14.11.1.10.1.1.1.1.6,HP-ICF-IPCONFIG::hpicfIpAddressExtendedType,INTEGER,read-create,,current,none(0):eui64(1):linkLocal(2),IP address type. For V4 addresses the value will be  none. For V6 address it can be eui64 and linkLocal also.
.1.3.6.1.4.1.11.2.14.11.1.10.1.1.2,HP-ICF-IPCONFIG::hpicfSwitchIpAddressTable,,not-accessible,,current,,This read only table contains IPV4 and/or IPV6 addresses for each interface. These IP Addresses are either manually configured or  obtained by a dynamic method (such as DHCP). This table will hold all manually configured IP Addresses that exist in hpicfIpAddressTable except for those entries that are not in active state (hpicfIpAddressRowStatus).
.1.3.6.1.4.1.11.2.14.11.1.10.1.1.2.1,HP-ICF-IPCONFIG::hpicfSwitchIpAddressEntry,,not-accessible,ifIndex:hpicfSwitchIpAddressAddrType:hpicfSwitchIpAddressAddr,current,,An entry in the hpicfSwitchIpAddressEntry contains a single  IP address.
.1.3.6.1.4.1.11.2.14.11.1.10.1.1.2.1.1,HP-ICF-IPCONFIG::hpicfSwitchIpAddressAddrType,INTEGER,not-accessible,,current,unknown(0):ipv4(1):ipv6(2):ipv4z(3):ipv6z(4):dns(16),Type of IP address.
.1.3.6.1.4.1.11.2.14.11.1.10.1.1.2.1.2,HP-ICF-IPCONFIG::hpicfSwitchIpAddressAddr,OCTET,not-accessible,,current,,The IP address to which this entry's addressing information pertains. hpicfSwitchIpAddressAddr is always interpreted within the context of hpicfSwitchIpAddressAddrType.
.1.3.6.1.4.1.11.2.14.11.1.10.1.1.2.1.3,HP-ICF-IPCONFIG::hpicfSwitchIpAddressPrefixLength,Unsigned32,read-only,,current,,The prefix length associated with IP address.
.1.3.6.1.4.1.11.2.14.11.1.10.1.1.2.1.4,HP-ICF-IPCONFIG::hpicfSwitchIpAddressType,INTEGER,read-only,,current,unicast(1):anycast(2),IP address type. For V4 addresses the value will be  unicast.
.1.3.6.1.4.1.11.2.14.11.1.10.1.1.2.1.5,HP-ICF-IPCONFIG::hpicfSwitchIpAddressOrigin,INTEGER,read-only,,current,other(1):manual(2):dhcp(4):linklayer(5):random(6),The origin of the address.
.1.3.6.1.4.1.11.2.14.11.1.10.1.1.2.1.6,HP-ICF-IPCONFIG::hpicfSwitchIpAddressStatus,INTEGER,read-only,,current,preferred(1):deprecated(2):invalid(3):inaccessible(4):unknown(5):tentative(6):duplicate(7):optimistic(8),The status of the address, describing if the address can be used for communication. In the absence of other information, an IPv4 address is always preferred(1).
.1.3.6.1.4.1.11.2.14.11.1.10.1.1.2.1.7,HP-ICF-IPCONFIG::hpicfSwitchIpAddressPreferredLifetime,Unsigned32,read-only,,current,,The remaining length of time in seconds that this address will continue to be preferred, i.e. time until deprecation. A value of 4,294,967,295 represents infinity. The address generated from a deprecated address should no longer be used as a source address in new communications, but packets received on such an interface are processed as expected. The default for IPv4 addresses is 4,294,967,295 (infinity).
.1.3.6.1.4.1.11.2.14.11.1.10.1.1.2.1.8,HP-ICF-IPCONFIG::hpicfSwitchIpAddressValidLifetime,Unsigned32,read-only,,current,,The remaining length of time, in seconds, that this address will continue to be valid, i.e. time until invalidation. A value of 4,294,967,295 represents infinity. The address generated from an invalidated address should not appear as the destination or source address of a packet. The default for IPv4 addresses is 4,294,967,295 (infinity).
.1.3.6.1.4.1.11.2.14.11.1.10.1.1.2.1.9,HP-ICF-IPCONFIG::hpicfSwitchIpAddressExtendedType,INTEGER,read-only,,current,none(0):eui64(1):linkLocal(2),IP address type. For V4 addresses the value will be  none. For V6 address it can be eui64 and linkLocal also.
.1.3.6.1.4.1.11.2.14.11.1.10.1.1.3,HP-ICF-IPCONFIG::hpicfIpNetToPhysicalTable,,not-accessible,,current,,This table augments ipNeTtoPhysicalTable
.1.3.6.1.4.1.11.2.14.11.1.10.1.1.3.1,HP-ICF-IPCONFIG::hpicfIpNetToPhysicalEntry,,not-accessible,,current,,This table augments ipNeTtoPhysicalTable
.1.3.6.1.4.1.11.2.14.11.1.10.1.1.3.1.1,HP-ICF-IPCONFIG::hpicfIpNetToPhysicalPort,Integer32,read-create,,current,,This object gives the port through which the
.1.3.6.1.4.1.11.2.14.11.1.10.1.1.4,HP-ICF-IPCONFIG::hpicfIpNetToPhysicalTableClear,INTEGER,read-write,,current,unknown(1):ipv4(2):ipv6(3),This provides the clear options for hpicfIpNetToPhysicalTable. A value of 2 is to clear arp table. A value of 3  is to clear the ipv6 neighbor table. A get returns 'unknown' always.
.1.3.6.1.4.1.11.2.14.11.1.10.1.2,HP-ICF-IPCONFIG::hpicfIpv4InterfaceObjects,,,,,,
.1.3.6.1.4.1.11.2.14.11.1.10.1.2.1,HP-ICF-IPCONFIG::hpicfIpv4InterfaceTable,,not-accessible,,current,,This table contains per-interface IPV4 configuration information.
.1.3.6.1.4.1.11.2.14.11.1.10.1.2.1.1,HP-ICF-IPCONFIG::hpicfIpv4InterfaceEntry,,not-accessible,,current,,An entry in the hpicfIpv4InterfaceEntry contains IPV4  interface specific configuration information. This table is indexed by ipv4InterfaceIfIndex.
.1.3.6.1.4.1.11.2.14.11.1.10.1.2.1.1.1,HP-ICF-IPCONFIG::hpicfIpv4InterfaceDhcpEnable,INTEGER,read-write,,current,full(1):off(2):inform(3),Changing this flag to 'full' will clear any existing IP address configuration for this interface and will cause the device to use a dynamic method (e.g. DHCP) to obtain its IP configuration and other configuration parameter (such as gateway, time of day, etc...) for this interface. Setting this flag to 'inform' will allow manual IP address configuration and yet permit other configuration parameters (such as gateway, time of day, etc...) to be obtained from a DHCP server. Setting this flag to 'off' will allow manual IP configuration but disallow any DHCP configuration.
.1.3.6.1.4.1.11.2.14.11.1.10.1.2.1.1.2,HP-ICF-IPCONFIG::hpicfIpv4InterfaceForwarding,INTEGER,read-write,,current,enabled(1):disabled(2),This flag indicates whether this interface is forwarding the datagrams that were not addressed to this interface. Setting this flag to 'enabled' (the default) results  in forwarding the datagrams that were not addressed to  this interface. Setting this flag to 'disabled' results in ignoring datagrams that were not addressed to this entity.
.1.3.6.1.4.1.11.2.14.11.1.10.1.2.1.1.3,HP-ICF-IPCONFIG::hpicfIpv4InterfaceProxyArp,INTEGER,read-write,,current,enabled(1):disabled(2),Enables/disables ARP proxy on the interface. If set to 'enabled', the switch will respond on ARP request for IP addresses from other subnets. If set to disabled (the default), the switch will not respond on ARP request for IP addresses from other  subnets.
.1.3.6.1.4.1.11.2.14.11.1.10.1.2.1.1.4,HP-ICF-IPCONFIG::hpicfIpv4InterfaceLocalProxyArp,INTEGER,read-write,,current,enabled(1):disabled(2),Enables/disables local ARP proxy on the interface. If set to 'enabled', the switch will respond on ARP request for IP addresses within the local subnet. If set to disabled (the default), the switch will not respond on ARP request for IP addresses within the  local subnet.
.1.3.6.1.4.1.11.2.14.11.1.10.1.2.1.1.5,HP-ICF-IPCONFIG::hpicfIpv4InterfaceBootpGateway,OCTET,read-write,,current,,This entry will specify the IP address to be used 
.1.3.6.1.4.1.11.2.14.11.1.10.1.2.1.1.6,HP-ICF-IPCONFIG::hpicfIpv4InterfaceDirectedBcastFwd,INTEGER,read-write,,current,enabled(1):default(2),Enable/disable directed-broadcast forwarding  on this interface. When set to default, the global hpicfDBroadcastFwdEnable setting is  used. When set to enable, directed-broadcasts  are enabled irrespective of the global  setting.
.1.3.6.1.4.1.11.2.14.11.1.10.1.2.3,HP-ICF-IPCONFIG::hpicfUdpTunnelTable,,not-accessible,,current,,This table contains per interface IPV4 Udp encapsulated tunnel specific configuration information.
.1.3.6.1.4.1.11.2.14.11.1.10.1.2.3.1,HP-ICF-IPCONFIG::hpicfUdpTunnelEntry,,not-accessible,,current,,An entry in the hpicfUdpTunnelEntry contains Udp encapsulated tunnel specific configuration information.
.1.3.6.1.4.1.11.2.14.11.1.10.1.2.3.1.1,HP-ICF-IPCONFIG::hpicfUdpTunnelSrcPort,Unsigned32,read-create,,current,,This variable is valid only for the remote mirroring source or destination switch.  The value will be ignored otherwise. A  value of 0 means that the UDP port is irrelevant for the tunnel type. If this value is non-zero it must be duplicated in the tunnelInetConfigID value (this will ensure that a given UDP port can only be associated once with a given  tunnelInetConfigAddressType,  tunnelInetConfigLocalAddress, tunnelInetConfigRemoteAddress, tunnelInetConfigEncapsMethod combination).
.1.3.6.1.4.1.11.2.14.11.1.10.1.2.3.1.2,HP-ICF-IPCONFIG::hpicfUdpTunnelMirrorSessionID,Integer32,read-create,,current,,This variable is valid only for a remote mirroring switch which interfaces with the source end of the tunnel.  The value will be ignored otherwise. A  value of 0 means that the mirror session ID is irrelevant for the tunnel type. 
.1.3.6.1.4.1.11.2.14.11.1.10.1.2.3.1.3,HP-ICF-IPCONFIG::hpicfUdpTunnelMirrorTruncate,INTEGER,read-write,,current,enabled(1):disabled(2),Enables/disables truncation for remote mirroring.
.1.3.6.1.4.1.11.2.14.11.1.10.2,HP-ICF-IPCONFIG::hpicfIpConfigConformance,,,,,,
.1.3.6.1.4.1.11.2.14.11.1.10.2.1,HP-ICF-IPCONFIG::hpicfIpConfigCompliances,,,,,,
.1.3.6.1.4.1.11.2.14.11.1.10.2.1.1,HP-ICF-IPCONFIG::hpicfIpConfigCompliance,,,,,, A compliance statement for HP Routing switches with IP  Configuration
.1.3.6.1.4.1.11.2.14.11.1.10.2.1.2,HP-ICF-IPCONFIG::hpicfIpConfigCompliance2,,,,,, A compliance statement for HP Routing switches with IP  Configuration
.1.3.6.1.4.1.11.2.14.11.1.10.2.1.4,HP-ICF-IPCONFIG::hpicfIpConfigCompliance4,,,,,, A compliance statement for HP Routing switches with IP  Configuration
.1.3.6.1.4.1.11.2.14.11.1.10.2.1.5,HP-ICF-IPCONFIG::hpicfIpConfigCompliance5,,,,,, A compliance statement for HP Routing switches with IP  Configuration
.1.3.6.1.4.1.11.2.14.11.1.10.2.1.6,HP-ICF-IPCONFIG::hpicfIpConfigCompliance6,,,,,, A compliance statement for HP Routing switches with IP  Configuration
.1.3.6.1.4.1.11.2.14.11.1.10.2.1.7,HP-ICF-IPCONFIG::hpicfIpConfigCompliance7,,,,,, A compliance statement for HP Routing switches with IP  Configuration
.1.3.6.1.4.1.11.2.14.11.1.10.2.1.8,HP-ICF-IPCONFIG::hpicfIpConfigCompliance8,,,,,, A compliance statement for HP Routing switches with IP  Configuration
.1.3.6.1.4.1.11.2.14.11.1.10.2.1.9,HP-ICF-IPCONFIG::hpicfIpConfigCompliance9,,,,,, A compliance statement for HP Routing switches with IP  Configuration
.1.3.6.1.4.1.11.2.14.11.1.10.2.2,HP-ICF-IPCONFIG::hpicfIpConfigGroups,,,,,,
.1.3.6.1.4.1.11.2.14.11.1.10.2.2.1,HP-ICF-IPCONFIG::hpicfIpAddressTableGroup,,,,,,A Collection of objects allowing configuration of an IP address for an interface.
.1.3.6.1.4.1.11.2.14.11.1.10.2.2.2,HP-ICF-IPCONFIG::hpicfSwitchIpAddressTableGroup,,,,,,A Collection of objects providing interfaces addressing information.
.1.3.6.1.4.1.11.2.14.11.1.10.2.2.3,HP-ICF-IPCONFIG::hpicfIpv4InterfaceTableGroup,,,,,,Deprecated - see hpicfIpv4InterfaceTableGroup2
.1.3.6.1.4.1.11.2.14.11.1.10.2.2.4,HP-ICF-IPCONFIG::hpicfUdpTunnelTableGroup,,,,,,A Collection of objects that allows IPV4 interface  configuration for remote mirroring
.1.3.6.1.4.1.11.2.14.11.1.10.2.2.5,HP-ICF-IPCONFIG::hpicfIpv6InterfaceTableGroup,,,,,,A Collection of objects that allows IPV6 interface  configuration
.1.3.6.1.4.1.11.2.14.11.1.10.2.2.6,HP-ICF-IPCONFIG::hpicfIpv4InterfaceTableGroup2,,,,,,A Collection of objects that allows IPV4 interface  configuration
.1.3.6.1.4.1.11.2.14.11.1.10.2.2.7,HP-ICF-IPCONFIG::hpicfIpv6DadAttemptsGroup,,,,,,A collection of objects that allows the number of DAD  Attempts to be configured globally and also on a per interface basis.
.1.3.6.1.4.1.11.2.14.11.1.10.2.2.8,HP-ICF-IPCONFIG::hpicfIpv6IcmpGroup,,,,,,Objects provided for the ipv6 icmp configuration.
.1.3.6.1.4.1.11.2.14.11.1.10.2.2.9,HP-ICF-IPCONFIG::hpicfIpNetToPhysicalTableGroup,,,,,,Objects provided for the clear options in the device.
.1.3.6.1.4.1.11.2.14.11.1.10.2.2.10,HP-ICF-IPCONFIG::hpicfUdpTunnelMirrorGroup,,,,,,An object that enables or disables truncation for remote mirroring.
.1.3.6.1.4.1.11.2.14.11.1.10.2.2.11,HP-ICF-IPCONFIG::hpicfIpv6NDGroup,,,,,,Objects provided for configuration of ipv6 ND  parameters
.1.3.6.1.4.1.11.2.14.11.1.10.2.2.12,HP-ICF-IPCONFIG::hpicfIpv4InterfaceTableGroup3,,,,,,A Collection of objects that allows IPV4 interface  configuration
.1.3.6.1.4.1.11.2.14.11.1.10.3,HP-ICF-IPCONFIG::hpicfIpv6ConfigObjects,,,,,,
.1.3.6.1.4.1.11.2.14.11.1.10.3.1,HP-ICF-IPCONFIG::hpicfIpv6GlobalConfigObjects,,,,,,
.1.3.6.1.4.1.11.2.14.11.1.10.3.1.1,HP-ICF-IPCONFIG::hpicfIpv6NDObjects,,,,,,
.1.3.6.1.4.1.11.2.14.11.1.10.3.1.1.1,HP-ICF-IPCONFIG::hpicfIpv6NDDadAttempts,Integer32,read-write,,current,,The value in this object indicates the maximum number of neighbor solicitation requests that will be sent while performing duplicate address detection.
.1.3.6.1.4.1.11.2.14.11.1.10.3.1.2,HP-ICF-IPCONFIG::hpicfIpv6IcmpObjects,,,,,,
.1.3.6.1.4.1.11.2.14.11.1.10.3.1.2.1,HP-ICF-IPCONFIG::hpicfIpv6IcmpErrorInterval,Integer32,read-write,,current,,The value in this object indicates the error interval in which the token bucket algorithm places one token in the bucket for ICMPV6 rate limiting.Each token represents the right to send one ICMP error message. Each time an error is sent, it takes a token from the bucket.  ICMP will not be allowed to originate an error  message if the bucket is empty.
.1.3.6.1.4.1.11.2.14.11.1.10.3.1.2.2,HP-ICF-IPCONFIG::hpicfIpv6IcmpBucketsize,Integer32,read-write,,current,,The value in this object indicates the maximum number of tokens that can be in the bucket.
.1.3.6.1.4.1.11.2.14.11.1.10.3.2,HP-ICF-IPCONFIG::hpicfIpv6InterfaceObjects,,,,,,
.1.3.6.1.4.1.11.2.14.11.1.10.3.2.1,HP-ICF-IPCONFIG::hpicfIpv6InterfaceTable,,not-accessible,,current,,This table contains per-interface IPV6 configuration information.
.1.3.6.1.4.1.11.2.14.11.1.10.3.2.1.1,HP-ICF-IPCONFIG::hpicfIpv6InterfaceEntry,,not-accessible,,current,,An entry in the hpicfIpv6InterfaceEntry contains IPV6  interface specific configuration information. This table is indexed by ipv6InterfaceIfIndex.
.1.3.6.1.4.1.11.2.14.11.1.10.3.2.1.1.1,HP-ICF-IPCONFIG::hpicfIpv6InterfaceDhcpMode,INTEGER,read-write,,current,disabled(0):dhcpFull(1):dhcpInform(2),Setting this flag to 'dhcpFull' will clear any existing IP address configuration for this interface and will cause the device to use a dynamic method (e.g. DHCP) to obtain its IP configuration and other configuration parameter (such as gateway, time of day, etc...) for this interface. Setting this flag to 'dhcpInform' will allow manual IP address configuration and yet permit other configuration parameters (such as gateway, time of day, etc...) to be obtained from a DHCP server. Setting this flag to 'disabled' will not allow any of the above mentioned two configuration, but interface can have link-local, auto-config and manual ip-address.
.1.3.6.1.4.1.11.2.14.11.1.10.3.2.1.1.2,HP-ICF-IPCONFIG::hpicfIpv6InterfaceManual,INTEGER,read-write,,current,enabled(1):disabled(2),Setting this flag to 'enabled' will allow manual IP address configuration but disallow any DHCP configuration.
.1.3.6.1.4.1.11.2.14.11.1.10.3.2.1.1.3,HP-ICF-IPCONFIG::hpicfIpv6InterfaceAutoConfig,INTEGER,read-write,,current,enabled(1):disabled(2),Setting this flag to 'enabled' will allow host to configure automatically from default router. There may be multiple routers and in that scenario switch will add the addresses from all these routers
.1.3.6.1.4.1.11.2.14.11.1.10.3.2.1.1.4,HP-ICF-IPCONFIG::hpicfIpv6InterfaceDhcpRapidCommit,INTEGER,read-write,,current,enabled(1):disabled(2),Setting this flag to 'enabled' will allow the host to get address and configuration information from the dhcp server rapidly. This flag can be enabled only if the  hpicfIpv6InterfaceDhcpMode object is set as dhcpFull. By default this flag is set to disabled.
.1.3.6.1.4.1.11.2.14.11.1.10.3.2.1.1.5,HP-ICF-IPCONFIG::hpicfIpv6InterfaceDhcpRelay,INTEGER,read-write,,current,enabled(1):disabled(2),This flag indicates whether this interface is dhcp-relay enabled. By default this flag is set to disabled.
.1.3.6.1.4.1.11.2.14.11.1.10.3.2.1.1.6,HP-ICF-IPCONFIG::hpicfIpv6InterfaceCfgEnableStatus,INTEGER,read-write,,current,up(1):down(2),The indication of whether IPv6 is enabled (up) or disabled (down) on this interface.  Setting this object to up(1) will enable ipv6 for the given interface.Setting this object to down(2) will disable the ipv6 for the interface only if hpicfIpv6InterfaceDhcpMode, hpicfIpv6InterfaceManual and hpicfIpv6InterfaceAutoConfig are  disabled.A get on this object reflects the data saved in a  non-volatile storage. Note:To get the current ipv6 status for an interface refer to  ipv6InterfaceEnableStatus.
.1.3.6.1.4.1.11.2.14.11.1.10.3.2.1.1.7,HP-ICF-IPCONFIG::hpicfIpv6InterfaceDadAttempts,Integer32,read-write,,current,,This object indicates the maximum number of neighbor solicitation requests that will be sent while performing duplicate address detection for  this interface. Note: hpicfIpv6NDDadAttempts object's value will  be in use for dad attempts for this interface when  hpicfIpv6InterfaceDadAttemptsMode is 'global'. 
.1.3.6.1.4.1.11.2.14.11.1.10.3.2.1.1.8,HP-ICF-IPCONFIG::hpicfIpv6InterfaceDadAttemptsMode,INTEGER,read-write,,current,global(1):perInterface(2), This object indicates whether the value in hpicfIpv6NDDadAttempts is in use or the value in hpicfIpv6InterfaceDadAttempts  is in use for an entry in this table while performing duplicate address detection. A set to 'global' means:  - hpicfIpv6NDDadAttempts value will be used for dad  attempts. A set to 'perInterface' means: - hpicfIpv6InterfaceDadAttempts value will be used for dad attempts.
.1.3.6.1.4.1.11.2.14.11.1.10.3.2.1.1.9,HP-ICF-IPCONFIG::hpicfIpv6InterfaceReachableTime,Unsigned32,read-write,,current,,The time a neighbor is considered reachable after receiving a reachability confirmation.
.1.3.6.1.4.1.11.2.14.11.1.10.3.2.1.1.10,HP-ICF-IPCONFIG::hpicfIpv6InterfaceRetransmitTime,Unsigned32,read-write,,current,,The time between retransmissions of Neighbor Solicitation messages to a neighbor when resolving the address or when probing the reachability of a neighbor.
.1.3.6.1.4.1.11.2.14.11.1.11,HpicfHighAvailability-MIB::hpicfHighAvailability,,,,,,Management information for configuring Redundant  Management module on Hewlett-Packard network devices.
.1.3.6.1.4.1.11.2.14.11.1.11.1,HpicfHighAvailability-MIB::hpicfHAConfigObjects,,,,,,
.1.3.6.1.4.1.11.2.14.11.1.11.1.1,HpicfHighAvailability-MIB::hpicfHARedundancyManagementModuleMode,INTEGER,read-write,,current,enable(1):disable(2):warmStandby(3),Specify to enable/disable this feature. Enabling allows for management module redundancy when there are two management modules in the switch and does a hitless failover. Disabling prevents redundancy except due to  fatal hardware errors on one management module. warmStandby option does a non-hitless failover.
.1.3.6.1.4.1.11.2.14.11.1.11.1.2,HpicfHighAvailability-MIB::hpicfHAContinuousFwdingTime,Unsigned32,read-write,,current,,This is a configurable timer. After the failover, on the new AMM,  the route and neighbor table entries are marked as stale in the FIB.  As routing protocols begin to re-add routes, this stale flag  will be reset. When this timer expires, all route and neighbor table entries still marked stale [not yet re-added] will be removed. A value of 0 means that no layer 3 hitless behavior is desired,  and in this configuration, upon failover all FIB entries are  flushed and corresponding hardware entries are removed.  A default value of 5 minutes is chosen with the assumption that the routing protocols can finish re-adding the routes to  the equivalent state within this time.
.1.3.6.1.4.1.11.2.14.11.1.11.2,HpicfHighAvailability-MIB::hpicfHAStatusObjects,,,,,,
.1.3.6.1.4.1.11.2.14.11.1.11.2.1,HpicfHighAvailability-MIB::hpicfHAMgmtRedundancyFailureReason,INTEGER,read-only,,current,noRedundantModule(1):noFailure(2):unknownReason(3):mismatchOS(4):failedSelftest(5):communicationFailure(6):redundancyDisable(7),Specifies the reason a redundant management module failed to become a standby module.
.1.3.6.1.4.1.11.2.14.11.1.11.2.2,HpicfHighAvailability-MIB::hpicfHAMgmtFailovers,Counter32,read-only,,current,,Specifies the number of management module failovers since last chassis boot.
.1.3.6.1.4.1.11.2.14.11.1.11.2.3,HpicfHighAvailability-MIB::hpicfHALastFailoverTime,TimeTicks,read-only,,current,,Specifies the time (in hundredths of a second) of the  last management module failover.
.1.3.6.1.4.1.11.2.14.11.1.11.2.4,HpicfHighAvailability-MIB::hpicfHAFailOverLogTable,,not-accessible,,current,,This table contains High Availability(HA) failover log specific information.
.1.3.6.1.4.1.11.2.14.11.1.11.2.4.1,HpicfHighAvailability-MIB::hpicfHAFailOverLogEntry,,not-accessible,hpicfHAFailOverIndex,current,,Failover log information maintained for HA.
.1.3.6.1.4.1.11.2.14.11.1.11.2.4.1.1,HpicfHighAvailability-MIB::hpicfHAFailOverIndex,Integer32,not-accessible,,current,,This object uniquely identifies the  entries in the failover log table. This table contains maximum of recent 10 entries.
.1.3.6.1.4.1.11.2.14.11.1.11.2.4.1.2,HpicfHighAvailability-MIB::hpicfHAFailOverMgmtModule,Integer32,read-only,,current,,This object displays the management module information.It is similar to  entPhysicalIndex.
.1.3.6.1.4.1.11.2.14.11.1.11.2.4.1.3,HpicfHighAvailability-MIB::hpicfHAFailOverState,INTEGER,read-only,,current,unknown(1):active(2):standby(3),This object indicates the failover state. 'unknown' indicates the state of the management module is undefined and this resource is unable to report standby state. 'active' indicates the state of the management  module as active module and it means the resource is providing service. 'standby' indicates that the management  module is not providing service, but it  will be immediately able to take over the role of the resource to be backed up, without the need for initialization activity, and will contain the same information as the resource to be backed up.
.1.3.6.1.4.1.11.2.14.11.1.11.2.4.1.4,HpicfHighAvailability-MIB::hpicfHAFailOverTime,Integer32,read-only,,current,,This object indicates the failover time in seconds since 1/1/1990 0:0:0.
.1.3.6.1.4.1.11.2.14.11.1.11.2.4.1.5,HpicfHighAvailability-MIB::hpicfHAFailOverReason,INTEGER,read-only,,current,invalid(0):switchoverReq(1):buttonReq(2):crashReq(3):activeReset(4):altReset(5),This object define the reason for failover. 'switchoverReq' indicates failover as a  result of switchover command issued by the user. 'buttonReq' indicates failover as a result  of manual boot done by the user via reboot button. 'crashReq' indicates failover as a result  of crash that happened to the active module. 'activeReset' indicates failover as a result  of reset command issued by the user at  active module. 'altReset' indicates failover as a result  of reset command issued by the user at  the alternate module. 
.1.3.6.1.4.1.11.2.14.11.1.11.2.5,HpicfHighAvailability-MIB::hpicfHAMgmtModuleTable,,not-accessible,,current,,This table contains High Availability (HA) management module specific information.
.1.3.6.1.4.1.11.2.14.11.1.11.2.5.1,HpicfHighAvailability-MIB::hpicfHAMgmtModuleEntry,,not-accessible,entPhysicalIndex,current,,Management module information maintained for HA.
.1.3.6.1.4.1.11.2.14.11.1.11.2.5.1.1,HpicfHighAvailability-MIB::hpicfHAMgmtModuleState,INTEGER,read-only,,current,unknown(1):hotStandby(2):coldStandby(3):providingService(4),This object displays the state of the  the management module.This object is  similar to entStateStandby object.
.1.3.6.1.4.1.11.2.14.11.1.11.2.5.1.2,HpicfHighAvailability-MIB::hpicfHAMgmtModuleCardUpSince,Integer32,read-only,,current,,This object displays the card uptime in seconds since this module state. 
.1.3.6.1.4.1.11.2.14.11.1.11.2.5.1.3,HpicfHighAvailability-MIB::hpicfHAMgmtModuleStateSince,Integer32,read-only,,current,,This object displays time in seconds from which the current state is valid.
.1.3.6.1.4.1.11.2.14.11.1.11.2.5.1.4,HpicfHighAvailability-MIB::hpicfHAMgmtModuleRedundancyState,INTEGER,read-only,,current,unavailable(1):active(2):disabled(3):syncing(4):warmStandby(5):hitless(6),This object describes the management module's redundancy state. 'unavailable' indicates the redundancy module is not available due to error or absence of  the module. 'active' indicates the redundancy module is  currently active and is providing service.  'disabled' indicates the redundancy module is  disabled. 'syncing' indicates the redundancy module is in syncing state and after successful syncing  it will enter active state else it will report  error. 'warmStandby' indicates the redundancy module is  in warmstandby mode and is not providing service, but it will be immediately able to take over the role  of the resource to be backed up, without the need for  initialization activity, and will contain the same  information as the resource to be backed up but the  Layer2 information will not be synced. 'hitless'indicates the redundancy module is  in hitless mode and is not providing service, but it will be immediately able to take over the role of the resource to be backed up, without the need for initialization activity, and will contain the same information as the resource to be backed up.
.1.3.6.1.4.1.11.2.14.11.1.11.3,HpicfHighAvailability-MIB::hpicfHAConformance,,,,,,
.1.3.6.1.4.1.11.2.14.11.1.11.3.1,HpicfHighAvailability-MIB::hpicfHACompliances,,,,,,
.1.3.6.1.4.1.11.2.14.11.1.11.3.1.1,HpicfHighAvailability-MIB::hpicfHACompliance,,,,,,The compliance statement for SNMP entities which implement the hpicfHighAvailability MIB.
.1.3.6.1.4.1.11.2.14.11.1.11.3.1.2,HpicfHighAvailability-MIB::hpicfHACompliance1,,,,,,The compliance statement for SNMP entities which implement the hpicfHighAvailability MIB.
.1.3.6.1.4.1.11.2.14.11.1.11.3.2,HpicfHighAvailability-MIB::hpicfHAGroups,,,,,,
.1.3.6.1.4.1.11.2.14.11.1.11.3.2.1,HpicfHighAvailability-MIB::hpicfHAConfigGroup,,,,,,The collection of objects which are used to configure the Redundancy Management Module.
.1.3.6.1.4.1.11.2.14.11.1.11.3.2.2,HpicfHighAvailability-MIB::hpicfHAStatusGroup,,,,,,The collection of objects which are used to represent  Management Module statistics information.
.1.3.6.1.4.1.11.2.14.11.1.11.3.2.3,HpicfHighAvailability-MIB::hpicfHAFailOverGroup,,,,,,The collection of objects which are used to represent  failover log statistics information.
.1.3.6.1.4.1.11.2.14.11.1.11.3.2.4,HpicfHighAvailability-MIB::hpicfHAMgmtModuleGroup,,,,,,The collection of objects which are used to represent  management module specific information.
.1.3.6.1.4.1.11.2.14.11.1.12,HP-ICF-OID::hpicfCommonSecurity,,,,,,
.1.3.6.1.4.1.11.2.14.11.1.12.1,HP-ICF-USER-PROFILE-MIB::hpicfUsrProfileMIB,,,,,,This MIB module contains the definitions  of Managed Objects for user access profiles.
.1.3.6.1.4.1.11.2.14.11.1.12.1.0,HP-ICF-USER-PROFILE-MIB::hpicfUsrProfileCapability,,,,,,
.1.3.6.1.4.1.11.2.14.11.1.12.1.0.1,HP-ICF-USER-PROFILE-MIB::hpicfUsrProfileCapabilityByPortMap,OCTET,read-only,,current,,A string of octets containing on bit per access profile primitive as follows: bit 0 - PVID/native/untagged ingress VLAN bit 1 - Tagged Egress VLAN bit 2 - Ingress VLAN Filter  bit 3 - Priority Regeneration  bit 4 - Max. Ingress Bandwidth bit 5 - Max. Egress Bandwidth bit 6 - Filter List bit 7 - Hitcount Support bit 8 - through 64 - reserved  When a bit is set to one, it indicates that device supports the selected access profile primitive only on a per port ('hpicfUsrProfileUserPortNumber') basis. The consequence is  that the device can only enforce the same access primitive setting for all users ('hpicfUsrProfileUserMacAddr') on a given  port.
.1.3.6.1.4.1.11.2.14.11.1.12.1.0.2,HP-ICF-USER-PROFILE-MIB::hpicfUsrProfileCapabilityByUserMap,OCTET,read-only,,current,,A string of octets containing one bit per access profile primitive as follows: bit 0 - PVID/native/untagged ingress VLAN bit 1 - Tagged Egress VLAN bit 2 - Ingress VLAN Filter  bit 3 - Priority Regeneration  bit 4 - Max. Ingress Bandwidth bit 5 - Max. Egress Bandwidth bit 6 - Filter List bit 7 - Hitcount Support bit 8 - through 64 - reserved  When a bit is set to one, it indicates that device supports the selected access profile primitive on a per  'hpicfUsrProfileUserMacAddr' basis. The consequence is that the device can enforce unique per user access profile primitives for each user on a given port ('hpicfUsrProfileUserPortNumber').
.1.3.6.1.4.1.11.2.14.11.1.12.1.1,HP-ICF-USER-PROFILE-MIB::hpicfUsrProfileConfig,,,,,,
.1.3.6.1.4.1.11.2.14.11.1.12.1.1.1,HP-ICF-USER-PROFILE-MIB::hpicfUsrProfileConfigFilterListTable,,not-accessible,,current,,A table that contains configuration objects for filter lists.
.1.3.6.1.4.1.11.2.14.11.1.12.1.1.1.1,HP-ICF-USER-PROFILE-MIB::hpicfUsrProfileConfigFilterListEntry,,not-accessible,hpicfUsrProfileFilterListIndex,current,,The configuration information for a user's filtering profile.
.1.3.6.1.4.1.11.2.14.11.1.12.1.1.1.1.1,HP-ICF-USER-PROFILE-MIB::hpicfUsrProfileFilterListIndex,Integer32,not-accessible,,current,,The identifier used to select a list of filter rules. A filter list entry must be created before a filter rule entry can be added.
.1.3.6.1.4.1.11.2.14.11.1.12.1.1.1.1.2,HP-ICF-USER-PROFILE-MIB::hpicfUsrProfileConfigFilterListRowStatus,INTEGER,read-create,,current,active(1):notInService(2):notReady(3):createAndGo(4):createAndWait(5):destroy(6),This object indicates the status of this entry. Must NOT be active in order to modify an hpicfUsrProfileConfigFilterRuleEntry that is indexed on this entry's hpicfUsrProfileListIndex. This object must be in the notReady or notInService states in order for an  hpicfUsrProfileConfigFilterRuleEntry to be added, removed, or modified. In order to be changed to an active rowStatus, at least one rule sharing the list index must have an active  hpicfUsrProfileConfigFilterRuleRowStatus.
.1.3.6.1.4.1.11.2.14.11.1.12.1.1.1.1.3,HP-ICF-USER-PROFILE-MIB::hpicfUsrProfileConfigNasRulesIpv6,INTEGER,read-create,,current,enabled(1):disabled(2),Setting this attribute to enabled(1) enables the usage of IPv6 destinations in ACEs. When set to disabled(2) any implicit IP destinations will be translated as IPv4 only.
.1.3.6.1.4.1.11.2.14.11.1.12.1.1.2,HP-ICF-USER-PROFILE-MIB::hpicfUsrProfileConfigFilterRuleTable,,not-accessible,,current,,A table that contains configuration objects for filter lists.
.1.3.6.1.4.1.11.2.14.11.1.12.1.1.2.1,HP-ICF-USER-PROFILE-MIB::hpicfUsrProfileConfigFilterRuleEntry,,not-accessible,hpicfUsrProfileFilterRuleListIndex:hpicfUsrProfileFilterRuleIndex,current,,The configuration information for a user's filtering profile.
.1.3.6.1.4.1.11.2.14.11.1.12.1.1.2.1.1,HP-ICF-USER-PROFILE-MIB::hpicfUsrProfileFilterRuleListIndex,Integer32,not-accessible,,current,,The identifier used to select a list of filter rules. This filter rule list index must correspond to a created but not active filter list index in order for a rule entry to be created.
.1.3.6.1.4.1.11.2.14.11.1.12.1.1.2.1.2,HP-ICF-USER-PROFILE-MIB::hpicfUsrProfileFilterRuleIndex,Integer32,not-accessible,,current,,A numeric value assigned to each rule  within a list belong to the same  hpicfUsrProfileFilterListIndex. Rules  within a given list will be evaluated  in ascending order.
.1.3.6.1.4.1.11.2.14.11.1.12.1.1.2.1.3,HP-ICF-USER-PROFILE-MIB::hpicfUsrProfileConfigFilterRule,OCTET,read-create,,current,,Specifies a single filter rule using the  same syntax used for the  hp-nas-filter-rule RADIUS attribute.
.1.3.6.1.4.1.11.2.14.11.1.12.1.1.2.1.4,HP-ICF-USER-PROFILE-MIB::hpicfUsrProfileConfigFilterRuleRowStatus,INTEGER,read-create,,current,active(1):notInService(2):notReady(3):createAndGo(4):createAndWait(5):destroy(6),This object indicates the status of this entry. Must NOT be active in order to modify an hpicfUsrProfileConfigFilterRuleEntry. However, if an hpicfUsrProfileConfigFilterListRowStatus is set to destroy, all HpicfUsrProfileConfigFilterRuleEntry  entries sharing the common  hpicfUsrProfileFilterListIndex will also be destroyed regardless of the value of  hpicfUsrProfileConfigFilterRuleRowStatus.
.1.3.6.1.4.1.11.2.14.11.1.12.1.1.3,HP-ICF-USER-PROFILE-MIB::hpicfUsrProfileConfigTable,,not-accessible,,current,,A table that contains configuration objects for access profiles.
.1.3.6.1.4.1.11.2.14.11.1.12.1.1.3.1,HP-ICF-USER-PROFILE-MIB::hpicfUsrProfileConfigEntry,,not-accessible,hpicfUsrProfileConfigIndex,current,,The configuration information for an access profile.
.1.3.6.1.4.1.11.2.14.11.1.12.1.1.3.1.1,HP-ICF-USER-PROFILE-MIB::hpicfUsrProfileConfigIndex,Integer32,not-accessible,,current,,A unique numeric value assigned to each access profile in this table.
.1.3.6.1.4.1.11.2.14.11.1.12.1.1.3.1.2,HP-ICF-USER-PROFILE-MIB::hpicfUsrProfileConfigPvid,Unsigned32,read-create,,current,,Specifies the port VID (PVID), also known, as native VLAN to be used with this access  profile. To specify no pvid, set value to 4095, not 0.
.1.3.6.1.4.1.11.2.14.11.1.12.1.1.3.1.3,HP-ICF-USER-PROFILE-MIB::hpicfUsrProfileConfigPvidEnable,INTEGER,read-create,,current,true(1):false(2),Setting this attribute TRUE enables the  usage of 'hpicfUsrProfilePvid' when this  access profile is active.
.1.3.6.1.4.1.11.2.14.11.1.12.1.1.3.1.4,HP-ICF-USER-PROFILE-MIB::hpicfUsrProfileConfigTaggedEgressVlanMap1k,OCTET,read-create,,current,,A string of octets containing one bit per VLAN  for VLANS with 'VlanIndex' values of 0 through 1023.  The first octet corresponds to VLANs with 'VlanIndex'  values of 0 through 7, the second octet to VLANs 8  through 15, etc. The most significant bit of each octet  corresponds to the lowest 'VlanIndex' value in that  octet. Bit 0 in the 1K map is ignored/discarded. If variable hpicfUsrProfileConfigPvidEnable is TRUE,  some bit other than bit 0 in the 1K map must be set. To specify an empty tagged vlan map, vlanIndex value 4095 in the 4K map must be set. Setting a bit to '1' specifies the usage the  corresponding VLAN with this access profile.
.1.3.6.1.4.1.11.2.14.11.1.12.1.1.3.1.5,HP-ICF-USER-PROFILE-MIB::hpicfUsrProfileConfigTaggedEgressVlanMap2k,OCTET,read-create,,current,,A string of octets containing one bit per VLAN  for VLANS with 'VlanIndex' values of 1024 through 2047.  The first octet corresponds to VLANs with 'VlanIndex'  values of 1024 through 1031, the second octet to VLANs  1032 through 1039, etc. The most significant bit of  each octet corresponds to the lowest 'VlanIndex' value  in that octet. Setting a bit to '1' specifies the usage the  corresponding VLAN with this access profile.
.1.3.6.1.4.1.11.2.14.11.1.12.1.1.3.1.6,HP-ICF-USER-PROFILE-MIB::hpicfUsrProfileConfigTaggedEgressVlanMap3k,OCTET,read-create,,current,,A string of octets containing one bit per VLAN  for VLANS with 'VlanIndex' values of 2048 through 3071.  The first octet corresponds to VLANs with 'VlanIndex'  values of 2048 through 3071, the second octet to VLANs  2056 through 2063, etc. The most significant bit of  each octet corresponds to the lowest 'VlanIndex' value  in that octet. Setting a bit to '1' specifies the usage the  corresponding VLAN with this access profile.
.1.3.6.1.4.1.11.2.14.11.1.12.1.1.3.1.7,HP-ICF-USER-PROFILE-MIB::hpicfUsrProfileConfigTaggedEgressVlanMap4k,OCTET,read-create,,current,,A string of octets containing one bit per VLAN  for VLANS with 'VlanIndex' values of 3072 through 4095.  The first octet corresponds to VLANs with 'VlanIndex'  values of 3072 through 3079, the second octet to VLANs  3080 through 3087, etc. The most significant bit of  each octet corresponds to the lowest 'VlanIndex' value  in that octet. Setting a bit to '1' specifies the usage the  corresponding VLAN with this access profile.
.1.3.6.1.4.1.11.2.14.11.1.12.1.1.3.1.8,HP-ICF-USER-PROFILE-MIB::hpicfUsrProfileConfigTaggedEgressVlanEnable,INTEGER,read-create,,current,true(1):false(2),Setting this attribute TRUE enables the  usage of 'hpicfUsrProfileTaggedVlanMapXXX' when this  access profile is being enforced.
.1.3.6.1.4.1.11.2.14.11.1.12.1.1.3.1.9,HP-ICF-USER-PROFILE-MIB::hpicfUsrProfileConfigIngressVlanFilterEnable,INTEGER,read-create,,current,true(1):false(2),Setting this attribute TRUE causes the system to only allow ingress traffic from those VLANs on which egress traffic is permitted.
.1.3.6.1.4.1.11.2.14.11.1.12.1.1.3.1.10,HP-ICF-USER-PROFILE-MIB::hpicfUsrProfileConfigPriorityRegenTable,OCTET,read-create,,current,,Specifies the IEEE 802 priority regeneration table for this access profile. Syntax of octet string  is same as for 'User-Priority-Table' RADIUS attribute as defined in RFC4675.
.1.3.6.1.4.1.11.2.14.11.1.12.1.1.3.1.11,HP-ICF-USER-PROFILE-MIB::hpicfUsrProfileConfigPriorityRegenTableEnable,INTEGER,read-create,,current,true(1):false(2),Setting this attribute TRUE enables the usage of the 'hpicfUsrProfilePriorityRegenTable' when this access profile is active.
.1.3.6.1.4.1.11.2.14.11.1.12.1.1.3.1.12,HP-ICF-USER-PROFILE-MIB::hpicfUsrProfileConfigMaxIngressBandwidth,Unsigned32,read-create,,current,,Specifies the maximum ingress bandwidth for this  access profile. Bandwidth value is specified in Kbps.
.1.3.6.1.4.1.11.2.14.11.1.12.1.1.3.1.13,HP-ICF-USER-PROFILE-MIB::hpicfUsrProfileConfigMaxIngressBandwidthEnable,INTEGER,read-create,,current,true(1):false(2),Setting this attribute TRUE enables the usage of the 'hpicfUsrProfileMaxIngressBandwidth' when this access profile is active.
.1.3.6.1.4.1.11.2.14.11.1.12.1.1.3.1.14,HP-ICF-USER-PROFILE-MIB::hpicfUsrProfileConfigMaxEgressBandwidth,Unsigned32,read-create,,current,,Specifies the maximum egress bandwidth for this  access profile. Bandwidth value is specified in Kbps.
.1.3.6.1.4.1.11.2.14.11.1.12.1.1.3.1.15,HP-ICF-USER-PROFILE-MIB::hpicfUsrProfileConfigMaxEgressBandwidthEnable,INTEGER,read-create,,current,true(1):false(2),Setting this attribute TRUE enables the usage of 'hpicfUsrProfileMaxEgressBandwidth' when this access profile is active.
.1.3.6.1.4.1.11.2.14.11.1.12.1.1.3.1.16,HP-ICF-USER-PROFILE-MIB::hpicfUsrProfileConfigFilterListIndex,Integer32,read-create,,current,,Selects the filter from  'hpicfUsrProfileConfigFilterTable' to associate with this access profile. The rowStatus of the filter must be in an active state.
.1.3.6.1.4.1.11.2.14.11.1.12.1.1.3.1.17,HP-ICF-USER-PROFILE-MIB::hpicfUsrProfileConfigFilterListEnable,INTEGER,read-create,,current,true(1):false(2),Setting this attribute TRUE enables the usage of 'hpicfUsrProfileConfigFilterListIndex' when this access profile is active.
.1.3.6.1.4.1.11.2.14.11.1.12.1.1.3.1.18,HP-ICF-USER-PROFILE-MIB::hpicfUsrProfileConfigEntryRowStatus,INTEGER,read-create,,current,active(1):notInService(2):notReady(3):createAndGo(4):createAndWait(5):destroy(6),This object indicates the status of this entry. Must NOT be active in order to change some other column of this config entry.
.1.3.6.1.4.1.11.2.14.11.1.12.1.1.4,HP-ICF-USER-PROFILE-MIB::hpicfUsrProfileConfigBindTable,,not-accessible,,current,,A table that contains configuration objects for the access profile-to-user bindings.
.1.3.6.1.4.1.11.2.14.11.1.12.1.1.4.1,HP-ICF-USER-PROFILE-MIB::hpicfUsrProfileConfigBindEntry,,not-accessible,hpicfUsrProfileUserPortNumber:hpicfUsrProfileUserMacAddr,current,,The configuration information for a  access profile-to-user binding.
.1.3.6.1.4.1.11.2.14.11.1.12.1.1.4.1.1,HP-ICF-USER-PROFILE-MIB::hpicfUsrProfileUserPortNumber,Integer32,not-accessible,,current,,The interface index associated with this user. On wired HP products, the interface index is the physical port. On wireless products it is  the instance (whether real or virtual) of an AP.
.1.3.6.1.4.1.11.2.14.11.1.12.1.1.4.1.2,HP-ICF-USER-PROFILE-MIB::hpicfUsrProfileUserMacAddr,OCTET,not-accessible,,current,,The 48-bit IEEE media access control address of the user.
.1.3.6.1.4.1.11.2.14.11.1.12.1.1.4.1.3,HP-ICF-USER-PROFILE-MIB::hpicfUsrProfileSelector,Integer32,read-create,,current,,Setting this attribute to a value between 1 and 16384 selects an access profile from  'hpicfUsrProfileConfigTable' to apply to the user.
.1.3.6.1.4.1.11.2.14.11.1.12.1.1.4.1.4,HP-ICF-USER-PROFILE-MIB::hpicfUsrProfileConfigBindEntryRowStatus,INTEGER,read-create,,current,active(1):notInService(2):notReady(3):createAndGo(4):createAndWait(5):destroy(6),This object indicates the status of this entry. Must NOT be active in order to change some other column of this bind entry.
.1.3.6.1.4.1.11.2.14.11.1.12.1.1.5,HP-ICF-USER-PROFILE-MIB::hpicfUsrProfileConfigConflictResolveQoS,INTEGER,read-write,,current,non-strict(0):strict(1),This object controls how a device behaves when QoS conflicts arise. A conflict can arise if a device only supports the QoS access primitive on a per-port basis, but device is being configured with profiles that have per-user unique setting. Applying these profiles to the same port will cause the conflict to arise because the device cannot enforce a per-user unique QoS setting. This object specifies two alternatives, as follows:  'non-strict' - Device does not signal errors when multiple access profiles are applied to a port. The device will apply the QoS settings specified in the  last profile applied to the port.  'strict' - Device does signal an error when an  attempt to apply an access profile to a port that already has an active access profile with a different QoS setting. Device will not activate the access profile in question after error is  signaled. 
.1.3.6.1.4.1.11.2.14.11.1.12.1.1.6,HP-ICF-USER-PROFILE-MIB::hpicfUsrProfileConfigConflictResolveMaxIngressBandwidth,INTEGER,read-write,,current,non-strict(0):strict(1),This object controls how a device behaves when ingress BW conflicts arise. A conflict can arise if a device only supports the ingress BW access primitive on a per-port basis, but device is being configured with profiles that have per-user unique setting. Applying these profiles to the same port will cause the conflict to arise because the device cannot enforce a per-user unique ingress BW setting. This object specifies two alternatives, as follows:  'non-strict' - Device does not signal errors when multiple access profiles are applied to a port. The device will apply the ingress BW settings specified in the  last profile applied to the port.  'strict' - Device does signal an error when an  attempt to apply an access profile to a port that already has an active access profile with a different ingress BW setting. Device will not activate the access profile in question after error is  signaled. 
.1.3.6.1.4.1.11.2.14.11.1.12.1.1.7,HP-ICF-USER-PROFILE-MIB::hpicfUsrProfileConfigConflictResolveMaxEgressBandwidth,INTEGER,read-write,,current,non-strict(0):strict(1),This object controls how a device behaves when egress BW conflicts arise. A conflict can arise if a device only supports the egress BW access primitive on a per-port basis, but device is being configured with profiles that have per-user unique setting. Applying these profiles to the same port will cause the conflict to arise because the device cannot enforce a per-user egress BW setting. This object specifies two alternatives, as follows:  'non-strict' - Device does not signal errors when multiple access profiles are applied to a port. The device will apply the egress BW settings specified in the  last profile applied to the port.  'strict' - Device does signal an error when an  attempt to apply an access profile to a port that already has an active access profile with a different egress BW setting. Device will not activate the access profile in question after error is  signaled. 
.1.3.6.1.4.1.11.2.14.11.1.12.1.2,HP-ICF-USER-PROFILE-MIB::hpicfUsrProfileStats,,,,,,
.1.3.6.1.4.1.11.2.14.11.1.12.1.2.1,HP-ICF-USER-PROFILE-MIB::hpicfUsrProfileLastUpdate,TimeTicks,read-only,,current,,A snapshot of the module sysUpTime at the time  of the last update to the access profiles  in effect. A value of 0 indicates that the  hpicfUsrProfileLastUpdate object is not  supported by the device and a fresh copy of the hpicfUsrProfileTable will always need to be  obtained by the management application.
.1.3.6.1.4.1.11.2.14.11.1.12.1.2.2,HP-ICF-USER-PROFILE-MIB::hpicfUsrProfileStatsFilterTable,,not-accessible,,current,,A table that contains statistic objects for filter lists.
.1.3.6.1.4.1.11.2.14.11.1.12.1.2.2.1,HP-ICF-USER-PROFILE-MIB::hpicfUsrProfileStatsFilterEntry,,not-accessible,hpicfUsrProfileFilterListIndex:hpicfUsrProfileFilterRuleIndex,current,,Statistic information for a user's filtering profile.
.1.3.6.1.4.1.11.2.14.11.1.12.1.2.2.1.1,HP-ICF-USER-PROFILE-MIB::hpicfUsrProfileStatsFilterRule,OCTET,read-only,,current,,Specifies a single filter rule using the  same syntax used for the  hp-nas-filter-rule RADIUS attribute.
.1.3.6.1.4.1.11.2.14.11.1.12.1.2.2.1.2,HP-ICF-USER-PROFILE-MIB::hpicfUsrProfileStatsFilterRuleHitCount,Counter64,read-only,,current,,Specifies the number of times (hit count) the user's traffic has matched this rule.
.1.3.6.1.4.1.11.2.14.11.1.12.1.2.2.1.3,HP-ICF-USER-PROFILE-MIB::hpicfUsrProfileStatsFilterRuleHitCountEnabled,INTEGER,read-only,,current,true(1):false(2),When this attribute is TRUE it signifies the 'hpicfUsrProfileStatsFilterRuleHitCount' contains a valid value. A FALSE value  signifies it does not contain a valid value.
.1.3.6.1.4.1.11.2.14.11.1.12.1.2.3,HP-ICF-USER-PROFILE-MIB::hpicfUsrProfileStatsTable,,not-accessible,,current,,This table describes the access profiles currently in effect.
.1.3.6.1.4.1.11.2.14.11.1.12.1.2.3.1,HP-ICF-USER-PROFILE-MIB::hpicfUsrProfileStatsEntry,,not-accessible,hpicfUsrProfileUserPortNumber:hpicfUsrProfileUserMacAddr,current,,An entry in the user access profile table.
.1.3.6.1.4.1.11.2.14.11.1.12.1.2.3.1.1,HP-ICF-USER-PROFILE-MIB::hpicfUsrProfileStatsPvid,Unsigned32,read-only,,current,,Active port VID (PVID) for this user.
.1.3.6.1.4.1.11.2.14.11.1.12.1.2.3.1.2,HP-ICF-USER-PROFILE-MIB::hpicfUsrProfileStatsTaggedEgressVlanMap1k,OCTET,read-only,,current,,A string of octets containing one bit per VLAN  for VLANS with 'VlanIndex' values of 0 through 1023.  The first octet corresponds to VLANs with 'VlanIndex'  values of 0 through 7, the second octet to VLANs 8  through 15, etc. The most significant bit of each octet  corresponds to the lowest 'VlanIndex' value in that  octet. When a bit is set to '1', it means the  corresponding tagged VLAN as active for this user.
.1.3.6.1.4.1.11.2.14.11.1.12.1.2.3.1.3,HP-ICF-USER-PROFILE-MIB::hpicfUsrProfileStatsTaggedEgressVlanMap2k,OCTET,read-only,,current,,A string of octets containing one bit per VLAN  for VLANS with 'VlanIndex' values of 1024 through 2047.  The first octet corresponds to VLANs with 'VlanIndex'  values of 1024 through 1031, the second octet to VLANs  1032 through 1039, etc. The most significant bit of  each octet corresponds to the lowest 'VlanIndex' value  in that octet. When a bit is set to '1', it indicates the  corresponding tagged VLAN as active for this user.
.1.3.6.1.4.1.11.2.14.11.1.12.1.2.3.1.4,HP-ICF-USER-PROFILE-MIB::hpicfUsrProfileStatsTaggedEgressVlanMap3k,OCTET,read-only,,current,,A string of octets containing one bit per VLAN  for VLANS with 'VlanIndex' values of 2048 through 3071.  The first octet corresponds to VLANs with 'VlanIndex'  values of 2048 through 2055, the second octet to VLANs  2056 through 2063, etc. The most significant bit of  each octet corresponds to the lowest 'VlanIndex' value  in that octet. When a bit is set to '1', it indicates the  corresponding tagged VLAN as active for this user.
.1.3.6.1.4.1.11.2.14.11.1.12.1.2.3.1.5,HP-ICF-USER-PROFILE-MIB::hpicfUsrProfileStatsTaggedEgressVlanMap4k,OCTET,read-only,,current,,A string of octets containing one bit per VLAN  for VLANS with 'VlanIndex' values of 3072 through 4095.  The first octet corresponds to VLANs with 'VlanIndex'  values of 3072 through 3079, the second octet to VLANs  3080 through 3087, etc. The most significant bit of  each octet corresponds to the lowest 'VlanIndex' value  in that octet. When a bit is set to '1', it indicates the  corresponding tagged VLAN as active for this user.
.1.3.6.1.4.1.11.2.14.11.1.12.1.2.3.1.6,HP-ICF-USER-PROFILE-MIB::hpicfUsrProfileStatsIngressVlanFilterEnable,INTEGER,read-only,,current,true(1):false(2),When this attribute is TRUE causes the system is only allowing ingress traffic from those VLANs on which  egress traffic is permitted.
.1.3.6.1.4.1.11.2.14.11.1.12.1.2.3.1.7,HP-ICF-USER-PROFILE-MIB::hpicfUsrProfileStatsPriorityRegenTable,OCTET,read-only,,current,,Specifies the IEEE 802 priority regeneration table active for this access profile. Syntax of octet string  is same as for 'User-Priority-Table' RADIUS attribute as defined in RFC4675.
.1.3.6.1.4.1.11.2.14.11.1.12.1.2.3.1.8,HP-ICF-USER-PROFILE-MIB::hpicfUsrProfileStatsMaxIngressBandwidth,Unsigned32,read-only,,current,,Specifies the maximum ingress bandwidth for this  access profile. Bandwidth value is specified in Kbps.
.1.3.6.1.4.1.11.2.14.11.1.12.1.2.3.1.9,HP-ICF-USER-PROFILE-MIB::hpicfUsrProfileStatsMaxEgressBandwidth,Unsigned32,read-only,,current,,Specifies the maximum egress bandwidth for this  access profile. Bandwidth value is specified in Kbps.
.1.3.6.1.4.1.11.2.14.11.1.12.1.2.3.1.10,HP-ICF-USER-PROFILE-MIB::hpicfUsrProfileStatsFilterListIndex,Integer32,read-only,,current,,A value of 0 indicates that no filter rule set is active for the user. A value between 1 and 16384 selects the active filter rule set from 'hpicfUsrProfileStatsFilterTable'.
.1.3.6.1.4.1.11.2.14.11.1.12.1.2.3.1.11,HP-ICF-USER-PROFILE-MIB::hpicfUsrProfileStatsAccessMode,INTEGER,read-only,,current,snmp(1):dot8021x(2):webauth(3):macauth(4):webmacauth(5),Indicates whether profile was applied via SNMP or via RADIUS. Application by SNMP has precedence  over RADIUS. Where there are no attribute conflicts, profile attributes may be a combination of those applied by both SNMP and RADIUS. In such case,  the variable value will still be SNMP.
.1.3.6.1.4.1.11.2.14.11.1.12.1.3,HP-ICF-USER-PROFILE-MIB::hpicfUsrProfileConformance,,,,,,
.1.3.6.1.4.1.11.2.14.11.1.12.1.3.1,HP-ICF-USER-PROFILE-MIB::hpicfUsrProfileGroup,,,,,,
.1.3.6.1.4.1.11.2.14.11.1.12.1.3.1.1,HP-ICF-USER-PROFILE-MIB::hpicfUsrProfileCapabilityGroup,,,,,,A collection of objects providing device capability  information for user access profiles.
.1.3.6.1.4.1.11.2.14.11.1.12.1.3.1.2,HP-ICF-USER-PROFILE-MIB::hpicfUsrProfileConfigGroup,,,,,,A collection of objects providing configuration of user access profiles.
.1.3.6.1.4.1.11.2.14.11.1.12.1.3.1.3,HP-ICF-USER-PROFILE-MIB::hpicfUsrProfileStatsGroup,,,,,,A collection of objects providing statistics of user access profiles.
.1.3.6.1.4.1.11.2.14.11.1.12.1.3.1.4,HP-ICF-USER-PROFILE-MIB::hpicfUsrProfileConfigGroup2,,,,,,A collection of objects providing configuration of user access profiles.
.1.3.6.1.4.1.11.2.14.11.1.12.1.3.2,HP-ICF-USER-PROFILE-MIB::hpicfUsrProfileCompliances,,,,,,
.1.3.6.1.4.1.11.2.14.11.1.12.1.3.2.1,HP-ICF-USER-PROFILE-MIB::hpicfUsrProfileCompliance,,,,,,The compliance statement for devices support of HP-USER-PROFILE-MIB.
.1.3.6.1.4.1.11.2.14.11.1.12.1.3.2.2,HP-ICF-USER-PROFILE-MIB::hpicfUsrProfileCompliance2,,,,,,The compliance statement for devices support of HP-USER-PROFILE-MIB.
.1.3.6.1.4.1.11.2.14.11.1.13,HP-ICF-OID::hpicfSrcIpMIB,,,,,,
.1.3.6.1.4.1.11.2.14.11.1.13.1,HP-ICF-SRCIP-MIB::hpicfSrcIpConfig,,,,,,
.1.3.6.1.4.1.11.2.14.11.1.13.1.1,HP-ICF-SRCIP-MIB::hpicfSrcIpAddrPolicyTable,,not-accessible,,current,,A table of entries used to configure the policy for selecting source IP address for different application protocols while transmitting the protocol specific IP packets. When the entry is configured the outgoing IP packets generated by the corresponding application protocol will have the source IP address field modified based on the configured policy option.
.1.3.6.1.4.1.11.2.14.11.1.13.1.1.1,HP-ICF-SRCIP-MIB::hpicfSrcIpAddrPolicyEntry,,not-accessible,hpicfSrcIpAddressType:hpicfSrcIpProtocolIndex,current,,An entry in the 'hpicfSrcIpAddrPolicyTable' containing information about a source IP address selection policy.
.1.3.6.1.4.1.11.2.14.11.1.13.1.1.1.1,HP-ICF-SRCIP-MIB::hpicfSrcIpAddressType,INTEGER,not-accessible,,current,unknown(0):ipv4(1):ipv6(2):ipv4z(3):ipv6z(4):dns(16),Type of IP address. The only values expected are ipv4  or ipv6.
.1.3.6.1.4.1.11.2.14.11.1.13.1.1.1.2,HP-ICF-SRCIP-MIB::hpicfSrcIpProtocolIndex,INTEGER,not-accessible,,current,tacacs(1):radius(2):syslog(3):telnet(4):tftp(5):sntp(6):sflow(7),The application protocol index value which uniquely identifies a row in the 'hpicfSrcIpAddrPolicyTable'.
.1.3.6.1.4.1.11.2.14.11.1.13.1.1.1.3,HP-ICF-SRCIP-MIB::hpicfSrcIpAddrPolicy,INTEGER,read-write,,current,outgoingInterface(1):configuredIpAddr(2):configuredInterface(3),The policy for selecting the source IP address. outgoingInterface - the IP address of outgoing interface should be used as the source. This is the default behavior if no other policy is configured. configuredIpAddr - the specific IP address configured on one of the  switch's IP interfaces (VLAN or loopback) should be used as the source. configuredInterface - an IP address configured on the specified IP interface (VLAN or loopback) should be used as the source. In case of multi-netted interface the lexicographically lowest IP address will be used.
.1.3.6.1.4.1.11.2.14.11.1.13.1.1.1.4,HP-ICF-SRCIP-MIB::hpicfSrcIpAddrIfIndex,Integer32,read-write,,current,,Index of IP interface whose IP address should be used as source IP while sending application protocol packets.  On multi-netted interface the lexicographically lowest IP address will be used. This object should be used in conjunction with the 'hpicfSrcIpAddrPolicy' MIB object.
.1.3.6.1.4.1.11.2.14.11.1.13.1.1.1.5,HP-ICF-SRCIP-MIB::hpicfSrcIpAddress,OCTET,read-write,,current,,Administratively assigned IP address that should be used as source while sending application protocol packets.  This object should be used in conjunction with the 'hpicfSrcIpAddrPolicy' MIB object.
.1.3.6.1.4.1.11.2.14.11.1.13.2,HP-ICF-SRCIP-MIB::hpicfSrcIpConformance,,,,,,
.1.3.6.1.4.1.11.2.14.11.1.13.2.1,HP-ICF-SRCIP-MIB::hpicfSrcIpGroups,,,,,,
.1.3.6.1.4.1.11.2.14.11.1.13.2.1.1,HP-ICF-SRCIP-MIB::hpicfSrcIpBaseGroup,,,,,,A collection of objects allowing configuration of policies for selecting source IP address for  application protocols.
.1.3.6.1.4.1.11.2.14.11.1.13.2.2,HP-ICF-SRCIP-MIB::hpicfSrcIpCompliances,,,,,,
.1.3.6.1.4.1.11.2.14.11.1.13.2.2.1,HP-ICF-SRCIP-MIB::hpicfSrcIpCompliance,,,,,,The core compliance statement for HP Routing switches with source IP address administrative control.
.1.3.6.1.4.1.11.2.14.11.1.14,HP-ICF-OID::hpicfCoreDumpMIB,,,,,,
.1.3.6.1.4.1.11.2.14.11.1.14.1,HP-ICF-CORE-DUMP-MIB::hpicfCoreDumpObjects,,,,,,
.1.3.6.1.4.1.11.2.14.11.1.14.1.1,HP-ICF-CORE-DUMP-MIB::hpicfCoreDumpConfig,,,,,,
.1.3.6.1.4.1.11.2.14.11.1.14.1.1.1,HP-ICF-CORE-DUMP-MIB::hpicfCoreDumpTable,,not-accessible,,current,,This table gives core dump status of management module
.1.3.6.1.4.1.11.2.14.11.1.14.1.1.1.1,HP-ICF-CORE-DUMP-MIB::hpicfCoreDumpEntry,,not-accessible,hpicfCoreDumpModule,current,,An entry in this table contains the core dump  module status of management module and interface  module.
.1.3.6.1.4.1.11.2.14.11.1.14.1.1.1.1.1,HP-ICF-CORE-DUMP-MIB::hpicfCoreDumpModule,Integer32,not-accessible,,current,,This object is the index of the table.
.1.3.6.1.4.1.11.2.14.11.1.14.1.1.1.1.2,HP-ICF-CORE-DUMP-MIB::hpicfCoreDumpMmStatus,INTEGER,read-write,,current,enabled(1):disabled(2),This is to enable/disable core dump 
.1.3.6.1.4.1.11.2.14.11.1.14.1.1.1.1.3,HP-ICF-CORE-DUMP-MIB::hpicfCoreDumpImStatus,INTEGER,read-write,,current,enabled(1):disabled(2),This is to enable/disable core dump
.1.3.6.1.4.1.11.2.14.11.1.14.1.1.2,HP-ICF-CORE-DUMP-MIB::hpicfCoreDumpTftpServerAddressType,INTEGER,read-write,,current,unknown(0):ipv4(1):ipv6(2):ipv4z(3):ipv6z(4):dns(16),The type of address in the corresponding hpSwitchCoreDumpTftpServerAddress object.
.1.3.6.1.4.1.11.2.14.11.1.14.1.1.3,HP-ICF-CORE-DUMP-MIB::hpicfCoreDumpTftpServerAddress,OCTET,read-write,,current,,The TFTP server address to upload the core dump file.
.1.3.6.1.4.1.11.2.14.11.1.14.2,HP-ICF-CORE-DUMP-MIB::hpicfCoreDumpConformance,,,,,,
.1.3.6.1.4.1.11.2.14.11.1.14.2.1,HP-ICF-CORE-DUMP-MIB::hpicfCoreDumpConfigGroups,,,,,,
.1.3.6.1.4.1.11.2.14.11.1.14.2.1.1,HP-ICF-CORE-DUMP-MIB::hpicfCoreDumpConfigGroup,,,,,,A collection of objects for enabling/disabling core dump on management module, interface module and configuring auto TFTP server address, address type.
.1.3.6.1.4.1.11.2.14.11.1.14.2.2,HP-ICF-CORE-DUMP-MIB::hpicfCoreDumpCompliances,,,,,,
.1.3.6.1.4.1.11.2.14.11.1.14.2.2.1,HP-ICF-CORE-DUMP-MIB::hpicfCoreDumpCompliance,,,,,,The compliance statement for devices support of HP-ICF-CORE-DUMP MIB.
.1.3.6.1.4.1.11.2.14.11.2,HP-ICF-OID::hpicfRepeater,,,,,,
.1.3.6.1.4.1.11.2.14.11.2.1,HP-ICF-8023-RPTR::hpRptrBasic,,,,,,
.1.3.6.1.4.1.11.2.14.11.2.1.1,HP-ICF-8023-RPTR::hpRptrBasicGlobal,,,,,,
.1.3.6.1.4.1.11.2.14.11.2.1.1.1,HP-ICF-8023-RPTR::hpRptrEntityName,OCTET,read-only,,deprecated,,********* THIS OBJECT IS DEPRECATED ********* The local name of this repeater. This is the  same value as hpicfEntityName in the case where  there is Distributed Management Protocol to access this device. For SNMPv1, this name is appended to the agent  community name to obtain a community name to use to specify that the agent should proxy to this repeater. For example, if this agent has a  community with a community name of 'public', and the value of this object is 'repeater1', the  community 'public/repeater1' will specify that the agent should proxy to the public community of the repeater1 box to obtain management information about this repeater. If an agent receives a management request where  the localEntity is not specified, it will default  to the local repeater on which this agent is  executing. This object has been deprecated. Since it is a scalar, it does not scale to systems containing multiple repeater segments. In addition, it is only considered useful in systems supporting the Distributed Management Chain, which has also been deprecated.
.1.3.6.1.4.1.11.2.14.11.2.1.1.2,HP-ICF-8023-RPTR::hpRptrThinlanFault,INTEGER,read-write,,deprecated,true(1):false(2),********* THIS OBJECT IS DEPRECATED ********* When set to 'true' this object causes the Fault  Led to blink if the ThinLan Port is segmented. This object has been deprecated. It only makes sense in systems that support a single BNC port.
.1.3.6.1.4.1.11.2.14.11.2.1.1.3,HP-ICF-8023-RPTR::hpRptrSqeEnabled,INTEGER,read-only,,deprecated,true(1):false(2),********* THIS OBJECT IS DEPRECATED ********* When 'true', this flag indicates that SQE has  been detected for the last ten agent transmits and there is a high probability that the SQE switch on the transceiver attached to the AUI port is set to Enabled, when it should be Disabled. This object has been deprecated, since it presumes that the system will only have a single AUI port. It has been replaced by the hpRptrPtSqeEnabled object.
.1.3.6.1.4.1.11.2.14.11.2.1.1.4,HP-ICF-8023-RPTR::hpRptrRobustHealing,INTEGER,read-write,,deprecated,true(1):false(2),********* THIS OBJECT IS DEPRECATED ********* When this flag is set to 'true', it enables  robust port healing mode. The 802.3 specification states that a segmented port is healed by  successfully transmitting or receiving a packet on the port. This mode disables port healing on  successful packet reception and requires that a  packet be successfully transmitted on a port in  order for a segmented port to be healed.
.1.3.6.1.4.1.11.2.14.11.2.1.2,HP-ICF-8023-RPTR::hpRptrBasicGroup,,,,,,
.1.3.6.1.4.1.11.2.14.11.2.1.2.1,HP-ICF-8023-RPTR::hpRptrBasicGroupTable,,not-accessible,,deprecated,,********* THIS OBJECT IS DEPRECATED ********* HP specific extensions to the rptrGroupTable.
.1.3.6.1.4.1.11.2.14.11.2.1.2.1.1,HP-ICF-8023-RPTR::hpRptrBasicGroupEntry,,not-accessible,hpRptrGrpGroupIndex,deprecated,,********* THIS OBJECT IS DEPRECATED ********* An entry in the table, containing HP extensions  for a specific group.
.1.3.6.1.4.1.11.2.14.11.2.1.2.1.1.1,HP-ICF-8023-RPTR::hpRptrGrpGroupIndex,Integer32,read-only,,deprecated,,********* THIS OBJECT IS DEPRECATED ********* The group within the repeater for which this  entry contains information. This object has the  same value as the corresponding instance of  rptrGroupIndex.
.1.3.6.1.4.1.11.2.14.11.2.1.2.1.1.2,HP-ICF-8023-RPTR::hpRptrGrpPortsAdminStatus,OCTET,read-only,,deprecated,,********* THIS OBJECT IS DEPRECATED ********* The hpRptrGrpPortsAdminStatus is a bit map of the state of the rptrPortAdminStatus object for all of the ports in this group. The object has a one bit for each port for which the value of rptrPortAdminStatus is equal to 'enabled(1)' and a zero bit for each port for which the value of rptrPortAdminStatus is equal to 'disabled(2)'. The bits are placed into the OCTET STRING in the  following order: octet 0 octet 1 octet 2 ... bits 7-0 bits 7-0 bits 7-0 ... ports 1-8 ports 9-16 ports 17-24 ... Values of unused bits in the last octet are  undefined.
.1.3.6.1.4.1.11.2.14.11.2.1.2.1.1.3,HP-ICF-8023-RPTR::hpRptrGrpPortsSegStatus,OCTET,read-only,,deprecated,,********* THIS OBJECT IS DEPRECATED ********* The hpRptrGrpPortsSegStatus is a bit map of the  state of the rptrPortAutoPartitionState of all of the ports in this group. The object has a one bit for each port for which the value of rptrPortAutoPartitionState is equal to  'notAutoPartitioned(1)' and a zero bit for each port for which the value of  rptrPortAutoPartitionState is equal to  'autoPartitioned(2)'. The bits are placed into the OCTET STRING in the  following order: octet 0 octet 1 octet 2 ... bits 7-0 bits 7-0 bits 7-0 ... ports 1-8 ports 9-16 ports 17-24 ... Values of unused bits in the last octet are  undefined.
.1.3.6.1.4.1.11.2.14.11.2.1.2.1.1.4,HP-ICF-8023-RPTR::hpRptrGrpPortsMediaAvailable,OCTET,read-only,,deprecated,,********* THIS OBJECT IS DEPRECATED ********* The hpRptrGrpPortsMediaAvailable is a bit map of  the state of the rpMauMediaAvailable object for  all of the ports in this group. The object has a  one bit for each port for which the value of rpMauMediaAvailable is equal to 'available(3)' and a zero bit for each port for which the value of rpMauMediaAvailable is not equal to 'available(3)'. The bits are placed into the OCTET STRING in the  following order: octet 0 octet 1 octet 2 ... bits 7-0 bits 7-0 bits 7-0 ... ports 1-8 ports 9-16 ports 17-24 ... Values of unused bits in the last octet are  undefined.
.1.3.6.1.4.1.11.2.14.11.2.1.2.1.1.5,HP-ICF-8023-RPTR::hpRptrGrpPortsLinkbeatEnabled,OCTET,read-only,,deprecated,,********* THIS OBJECT IS DEPRECATED ********* The hpRptrGrpPortsLinkbeatEnabled is a bit map of the state of the hpRptrPtLinkbeatEnable object for all of the ports in this group. The object has a one bit for each port for which the value of hpRptrPtLinkbeatEnable is equal to 'true(1)' and a zero bit for each port for which the value of hpRptrPtLinkbeatEnable is equal to 'false(2)'. The bits are placed into the OCTET STRING in the  following order: octet 0 octet 1 octet 2 ... bits 7-0 bits 7-0 bits 7-0 ... ports 1-8 ports 9-16 ports 17-24 ... Values of unused bits in the last octet are  undefined.
.1.3.6.1.4.1.11.2.14.11.2.1.2.1.1.6,HP-ICF-8023-RPTR::hpRptrGrpPortsOperStatus,OCTET,read-only,,deprecated,,********* THIS OBJECT IS DEPRECATED ********* The hpRptrGrpPortsOperStatus is a bit map of the  state of all hub ports in the group. The object  has a 1 bit for each port that is enabled, not  segmented, and the media is available. Ports on  which these conditions are not true have a 0 bit.  The bits are placed into the OCTET STRING in the  following order: octet 0 octet 1 octet 2 ... bits 7-0 bits 7-0 bits 7-0 ... ports 1-8 ports 9-16 ports 17-24 ... Values of unused bits in the last octet are  undefined.
.1.3.6.1.4.1.11.2.14.11.2.1.3,HP-ICF-8023-RPTR::hpRptrBasicPort,,,,,,
.1.3.6.1.4.1.11.2.14.11.2.1.3.1,HP-ICF-8023-RPTR::hpRptrBasicPtTable,,not-accessible,,current,,HP specific extensions to the rptrPortTable.
.1.3.6.1.4.1.11.2.14.11.2.1.3.1.1,HP-ICF-8023-RPTR::hpRptrBasicPtEntry,,not-accessible,hpRptrPtGroupIndex:hpRptrPtPortIndex,current,,An entry in the table, containing HP extensions  for a specific port.
.1.3.6.1.4.1.11.2.14.11.2.1.3.1.1.1,HP-ICF-8023-RPTR::hpRptrPtGroupIndex,Integer32,read-only,,current,,The group containing the port for which this  entry contains information. This object has the  same value as the corresponding instance of  rptrPortGroupIndex.
.1.3.6.1.4.1.11.2.14.11.2.1.3.1.1.2,HP-ICF-8023-RPTR::hpRptrPtPortIndex,Integer32,read-only,,current,,The port within the group for which this entry  contains information. This object has the same  value as the corresponding instance of  rptrPortIndex.
.1.3.6.1.4.1.11.2.14.11.2.1.3.1.1.3,HP-ICF-8023-RPTR::hpRptrPtLinkbeatEnable,INTEGER,read-write,,current,true(1):false(2),When this flag is set to 'true' the port's link  beat is enabled and when set to 'false' it is  disabled.
.1.3.6.1.4.1.11.2.14.11.2.1.3.1.1.4,HP-ICF-8023-RPTR::hpRptrPtPolarityReversed,INTEGER,read-only,,current,true(1):false(2),This object is used to indicate that the hub port was wired with the positive/negative polarity of  its transmit and receive pairs reversed. Note  that the port will continue to operate in this  state, with the hub inverting the polarity  internally.
.1.3.6.1.4.1.11.2.14.11.2.1.3.1.1.5,HP-ICF-8023-RPTR::hpRptrPtSqeEnabled,INTEGER,read-only,,current,true(1):false(2),When 'true', this flag indicates that SQE has  been detected for the last ten agent transmits and there is a high probability that the SQE switch on the transceiver attached to this port is set to Enabled, when it should be Disabled. This value can only be 'true' on AUI ports.
.1.3.6.1.4.1.11.2.14.11.2.1.3.1.1.6,HP-ICF-8023-RPTR::hpRptrPtMediaAvailTrapEnable,INTEGER,read-write,,current,true(1):false(2),Indicates whether hpicfMediaAvailDetectTrap and hpicfMediaAvailLostTrap events should be generated for MAUs attached to this port. This object has the value of 'false' by default. Setting the value of this object to 'true' will cause a  hpicfMediaAvailDetectTrap event to be generated whenever an instance of rpMauMediaAvailable object associated with a MAU attached to this port enters the 'available' state, and a hpicfMediaAvailLostTrap to be generated whenever an instance of the rpMauMediaAvailable object associated with a MAU attached to this port exits the 'available' state. Note that the disposition of these events is controlled by the RMON eventTable. We recommend that this object is only be set to 'true' on important ports, such as cascade ports and ports attached to routers bridges, switches, or servers. Setting this object to 'true' on other ports may cause irrelevant traps. For example, it is unlikely that an administrator would want to receive a trap every time a user turns their PC off.
.1.3.6.1.4.1.11.2.14.11.2.1.3.1.1.7,HP-ICF-8023-RPTR::hpRptrPtLongCableEnable,INTEGER,read-write,,current,true(1):false(2),When this flag is set to 'true' the port's squelch level will be reduced to account for extended distance connections. When set to 'false', this port's squelch level will be normal. We recommend that this object only be set to 'true' for ports that are actually connected to long cables.
.1.3.6.1.4.1.11.2.14.11.2.2,HP-ICF-8023-RPTR::hpRptrMonitor,,,,,,
.1.3.6.1.4.1.11.2.14.11.2.2.1,HP-ICF-8023-RPTR::hpRptrMonitorGlobal,,,,,,
.1.3.6.1.4.1.11.2.14.11.2.2.1.1,HP-ICF-8023-RPTR::hpRptrMonCounters,,,,,,
.1.3.6.1.4.1.11.2.14.11.2.2.1.1.1,HP-ICF-8023-RPTR::hpRptrMonGlobalFrames,Counter32,read-only,,deprecated,,********* THIS OBJECT IS DEPRECATED ********* The total number of frames of valid frame length that have been received on all ports in this repeater. This counter is the summation of the values of the rptrMonitorPortReadableFrames  counter for all of the ports in this repeater. Equivalently, this counter is the summation of the values of the rptrMonitorGroupTotalFrames counter  for all of the port groups in this repeater.
.1.3.6.1.4.1.11.2.14.11.2.2.1.1.2,HP-ICF-8023-RPTR::hpRptrMonGlobalOctets,Counter32,read-only,,deprecated,,********* THIS OBJECT IS DEPRECATED ********* The total number of octets contained in the valid frames that have been received on the ports in this repeater. This counter is the summation of the values of the rptrMonitorPortReadableOctets counter for all of the ports in this repeater. Equivalently, this counter is the summation of the values of the rptrMonitorGroupTotalOctets counter for all of the port groups in this repeater.
.1.3.6.1.4.1.11.2.14.11.2.2.1.1.3,HP-ICF-8023-RPTR::hpRptrMonGlobalFCSErrors,Counter32,read-only,,deprecated,,********* THIS OBJECT IS DEPRECATED ********* This counter is incremented by one for each frame received on any port with the FCSError signal asserted and the FramingError and CollisionEvent signals deasserted and whose OctetCount is greater than or equal to minFrameSize and less than or equal to maxFrameSize (Ref: 4.4.2.1, IEEE 802.3  Std). This counter is the summation of the values of the rptrMonitorPortFCSErrors counter for all of the ports in this repeater.
.1.3.6.1.4.1.11.2.14.11.2.2.1.1.4,HP-ICF-8023-RPTR::hpRptrMonGlobalAlignmentErrors,Counter32,read-only,,deprecated,,********* THIS OBJECT IS DEPRECATED ********* This counter is incremented by one for each frame received on any port with the FCSError and FramingError signals asserted and CollisonEvent signal deasserted and whose OctetCount is greater than or equal to minFrameSize and less than or equal to maxFrameSize (Ref: 4.4.2.1, IEEE 802.3 Std). If hpRptrMonGlobalAlignmentErrors is incremented, then the hpRptrMonGlobalFCSErorrs counter shall not be incremented for the same frame. This counter is the summation of the  values of the rptrMonitorPortAlignmentErrors  counter for all of the ports in this repeater.
.1.3.6.1.4.1.11.2.14.11.2.2.1.1.5,HP-ICF-8023-RPTR::hpRptrMonGlobalFrameTooLongs,Counter32,read-only,,deprecated,,********* THIS OBJECT IS DEPRECATED ********* This counter is incremented by one for each frame received on any port whose OctetCount is greater than maxFrameSize (Ref: 4.4.2.1, IEEE 802.3 Std). If hpRptrMonGlobalFrameTooLongs is incremented, then neither the hpRptrMonGlobalAlignmentErorrs  nor the hpRptrMonGlobalFCSErrors counter shall be incremented for the frame. This counter is the summation of the values of the rptrMonitorPortFrameTooLongs counter for all of the ports in this repeater.
.1.3.6.1.4.1.11.2.14.11.2.2.1.1.6,HP-ICF-8023-RPTR::hpRptrMonGlobalShortEvents,Counter32,read-only,,deprecated,,********* THIS OBJECT IS DEPRECATED ********* This counter is incremented by one for each CarrierEvent on any port with ActivityDuration less than ShortEventMaxTime. ShortEventMaxTime is greater than 74 bit times and less than 82 bit times. ShortEventMaxTime has tolerances included to provide for circuit losses between a conformance test point at the AUI and the measurement point within the state machine. This  counter is the summation of the values of the rptrMonitorPortShortEvents counter for all of the ports in this repeater.
.1.3.6.1.4.1.11.2.14.11.2.2.1.1.7,HP-ICF-8023-RPTR::hpRptrMonGlobalRunts,Counter32,read-only,,deprecated,,********* THIS OBJECT IS DEPRECATED ********* This counter is incremented by one for each CarrierEvent on any port that meets one of the following two conditions. Only one test need be made. a) The ActivityDuration is greater than ShortEventMaxTime and less than ValidPacketMinTime and the CollisionEvent signal is deasserted. b) The OctetCount is less than 64, the  ActivityDuration is greater than ShortEventMaxTime and the CollisionEvent signal is deasserted. ValidPacketMinTime is greater than or equal to 552 bit times but less than 565 bit times. An event whose length is greater than 74 bit times but less than 82 bit times shall increment either the hpRptrMonGlobalShortEvents counter or the hpRptrMonGlobalRunts counter but not both. A CarrierEvent greater than or equal to 552 bit times but less than 565 bit times may or may not increment the hpRptrMonGlobalRunts counter. ValidPacketMinTime has tolerances included to  provide for circuit losses between a conformance test point at the AUI and the measurement point within the state machine.  Runts usually indicate collision fragments, a  normal network event. This counter is the summation of the values of the  rptrMonitorPortRunts counter for all of the ports in this repeater.
.1.3.6.1.4.1.11.2.14.11.2.2.1.1.8,HP-ICF-8023-RPTR::hpRptrMonGlobalCollisions,Counter32,read-only,,deprecated,,********* THIS OBJECT IS DEPRECATED ********* This counter is incremented by one for any CarrierEvent signal on any port for which the CollisionEvent signal on any port is asserted. This counter differs from  rptrMonitorTransmitCollisions in that it counts all collisions seen by this repeater, even those involving only a single port on this repeater, whereas rptrMonitorTransmitCollisions counts only collisions involving multiple ports on this repeater.
.1.3.6.1.4.1.11.2.14.11.2.2.1.1.9,HP-ICF-8023-RPTR::hpRptrMonGlobalLateEvents,Counter32,read-only,,deprecated,,********* THIS OBJECT IS DEPRECATED ********* This counter is incremented by one for each CarrierEvent on any port in which the CollIn(X) variable transitions to the value SQE (Ref: 9.6.6.2, IEEE 802.3 Std) while the ActivityDuration is greater than the  LateEventThreshold. Such a CarrierEvent is counted twice, as both hpRptrMonGlobalCollisions and hpRptrMonGlobalLateEvents. The  LateEventThreshold is greater than 480 bit times and less than 565 bit times. LateEventThreshold has tolerances included to permit an  implementation to build a single threshold to serve as both the LateEventThreshold and ValidPacketMinTime threshold. This counter is the summation of the values of the  rptrMonitorPortLateEvents counter for all of the ports in this repeater.
.1.3.6.1.4.1.11.2.14.11.2.2.1.1.10,HP-ICF-8023-RPTR::hpRptrMonGlobalVeryLongEvents,Counter32,read-only,,deprecated,,********* THIS OBJECT IS DEPRECATED ********* This counter is incremented by one for each  CarrierEvent on any port whose ActivityDuration is greater than the MAU Jabber Lockup Protection  timer TW3 (Ref: 9.6.1 & 9.6.5, IEEE 802.3 Std). Other counters may be incremented as appropriate. This counter is the summation of the values of the rptrMonitorPortVeryLongEvents counter for all of the ports in this repeater.
.1.3.6.1.4.1.11.2.14.11.2.2.1.1.11,HP-ICF-8023-RPTR::hpRptrMonGlobalDataRateMismatches,Counter32,read-only,,deprecated,,********* THIS OBJECT IS DEPRECATED ********* This counter is incremented by one for each frame received on any port that meets all of the following conditions: a) The CollisionEvent signal is not asserted. b) The ActivityDuration is greater than ValidPacketMinTime. c) The frequency (data rate) is detectably mismatched  from the local transmit frequency. The exact degree of mismatch is vendor specific and is to be defined by the vendor for conformance testing. When this event occurs, other counters whose increment conditions were satisfied may or may not also be incremented. This counter is the  summation of the values of the  rptrMonitorPortDatRateMismatches counter for all of the ports in this repeater.
.1.3.6.1.4.1.11.2.14.11.2.2.1.1.12,HP-ICF-8023-RPTR::hpRptrMonGlobalAutoPartitions,Counter32,read-only,,deprecated,,********* THIS OBJECT IS DEPRECATED ********* This counter is incremented by one for each time the repeater has automatically partitioned any port. The conditions that cause port partitioning are specified in the partition state machine in Section 9 of the IEEE 802.3 Std. This counter is the summation of the values of the  rptrMonitorPortAutoPartitions for all of the ports in this repeater.
.1.3.6.1.4.1.11.2.14.11.2.2.1.1.13,HP-ICF-8023-RPTR::hpRptrMonGlobalErrors,Counter32,read-only,,deprecated,,********* THIS OBJECT IS DEPRECATED ********* The total number of errors which have occured on any port in this repeater. This counter is the summation of the values of other error  counters, namely: hpRptrMonGlobalFCSErrors, hpRptrMonGlobalAlignmentErrors, hpRptrMonGlobalFrameTooLongs, hpRptrMonGlobalShortEvents, hpRptrMonGlobalLateEvents, hpRptrMonGlobalVeryLongEvents, and hpRptrMonGlobalDataRateMismatches. Equivalently, this counter is the summation of the values of the rptrMonitorPortTotalErrors counter for all of the ports in this repeater, or it is the summation of the values of rptrMonitorGroupTotalErrors for all of the port groups in this repeater.
.1.3.6.1.4.1.11.2.14.11.2.2.1.1.14,HP-ICF-8023-RPTR::hpRptrMonGlobalUcastPackets,Counter32,read-only,,deprecated,,********* THIS OBJECT IS DEPRECATED ********* This counter is incremented by one for each  unicast packet of valid frame length received on  any port. This counter is the summation of  hpRptrMonPortUcastPackets for all of the ports in this repeater. This counter may not be implemented for repeaters which do not have a  local network management agent.
.1.3.6.1.4.1.11.2.14.11.2.2.1.1.15,HP-ICF-8023-RPTR::hpRptrMonGlobalBcastPackets,Counter32,read-only,,deprecated,,********* THIS OBJECT IS DEPRECATED ********* This counter is incremented by one for each  broadcast packet of valid frame length received on any port. This counter is the summation of hpRptrMonPortBcastPackets for all of the ports in this repeater. This counter may not be implemented for repeaters which do not have a  local network management agent.
.1.3.6.1.4.1.11.2.14.11.2.2.1.1.16,HP-ICF-8023-RPTR::hpRptrMonGlobalMcastPackets,Counter32,read-only,,deprecated,,********* THIS OBJECT IS DEPRECATED ********* This counter is incremented by one for each  multicast packet of valid frame length received on any port. This counter is the summation of hpRptrMonPortMcastPackets for all of the ports in this repeater. This counter may not be  implemented for repeaters which do not have a  local network management agent.
.1.3.6.1.4.1.11.2.14.11.2.2.2,HP-ICF-8023-RPTR::hpRptrMonitorGroup,,,,,,
.1.3.6.1.4.1.11.2.14.11.2.2.3,HP-ICF-8023-RPTR::hpRptrMonitorPort,,,,,,
.1.3.6.1.4.1.11.2.14.11.2.2.3.1,HP-ICF-8023-RPTR::hpRptrMonPtTable,,not-accessible,,current,,Table of HP specific per port monitor objects.
.1.3.6.1.4.1.11.2.14.11.2.2.3.1.1,HP-ICF-8023-RPTR::hpRptrMonPtEntry,,not-accessible,hpRptrMonPtGroupIndex:hpRptrMonPtPortIndex,current,,An entry in the table, containing per port  objects for a single port.
.1.3.6.1.4.1.11.2.14.11.2.2.3.1.1.1,HP-ICF-8023-RPTR::hpRptrMonPtGroupIndex,Integer32,read-only,,current,,The group containing the port for which this  entry contains information. This object has the  same value as the corresponding instance of  rptrMonitorPortGroupIndex.
.1.3.6.1.4.1.11.2.14.11.2.2.3.1.1.2,HP-ICF-8023-RPTR::hpRptrMonPtPortIndex,Integer32,read-only,,current,,The port within the group for which this entry  contains information. This object has the same  value as the corresponding instance of  rptrMonitorPortIndex.
.1.3.6.1.4.1.11.2.14.11.2.2.3.1.1.3,HP-ICF-8023-RPTR::hpRptrMonPtUcastPackets,Counter32,read-only,,current,,This counter is incremented by one for each  unicast packet of valid frame length received on  this port. This object may not be implemented for repeaters which do not have a local network  management agent.
.1.3.6.1.4.1.11.2.14.11.2.2.3.1.1.4,HP-ICF-8023-RPTR::hpRptrMonPtBcastPackets,Counter32,read-only,,current,,This counter is incremented by one for each  broadcast packet of valid frame length received on this port. This object may not be implemented for repeaters which do not have a local network  management agent.
.1.3.6.1.4.1.11.2.14.11.2.2.3.1.1.5,HP-ICF-8023-RPTR::hpRptrMonPtMcastPackets,Counter32,read-only,,current,,This counter is incremented by one for each  multicast packet of valid frame length received on this port. This object may not be implemented for repeaters which do not have a local network  management agent.
.1.3.6.1.4.1.11.2.14.11.2.4,HP-ICF-8023-RPTR::hpRpMauGroup,,,,,,
.1.3.6.1.4.1.11.2.14.11.2.4.1,HP-ICF-8023-RPTR::hpRpMauTable,,not-accessible,,current,,HP extensions to the rpMauTable.
.1.3.6.1.4.1.11.2.14.11.2.4.1.1,HP-ICF-8023-RPTR::hpRpMauEntry,,not-accessible,rpMauGroupIndex:rpMauPortIndex:rpMauIndex,current,,An entry in the table, containing HP extensions for a single MAU.
.1.3.6.1.4.1.11.2.14.11.2.4.1.1.1,HP-ICF-8023-RPTR::hpRpMauTypeList,BITS,read-only,,current,bOther(0):bAUI(1):b10base5(2):bFoirl(3):b10base2(4):b10baseT(5):b10baseFP(6):b10baseFB(7):b10baseFL(8):b10broad36(9):b10baseTHD(10):b10baseTFD(11):b10baseFLHD(12):b10baseFLFD(13):b100baseT4(14):b100baseTXHD(15):b100baseTXFD(16):b100baseFXHD(17):b100baseFXFD(18):b100baseT2HD(19):b100baseT2FD(20),A value that uniquely identifies the set of possible IEEE 802.3 types that the MAU could be. If auto-negotiation is present on this MAU, this object will map to hpRpMauAutoNegCapability. Note that a repeater can never actually support the full-duplex MAU types. The bits for them are retained to keep the bit values consistent with ifMauTypeListBits.
.1.3.6.1.4.1.11.2.14.11.2.4.1.1.2,HP-ICF-8023-RPTR::hpRpMauAutoNegSupported,INTEGER,read-only,,current,true(1):false(2),This object indicates whether or not auto-negotiation is supported on this MAU.
.1.3.6.1.4.1.11.2.14.11.2.4.1.1.3,HP-ICF-8023-RPTR::hpRpMauAutoNegAdminStatus,INTEGER,read-write,,current,autoNegotiate(1):forceTo100TXHD(2):forceTo10THD(3),Setting this object to autoNegotiate(1) will cause auto-negotiation to be enabled on this port. Setting this object to forceTo100TXHD will cause auto-negotiation to be disabled on this port, and cause the operational type of the MAU on this port (as reported by rpMauType) to transition to dot3MauType100BaseTXHD. Setting this object to forceTo10THD will cause auto-negotiation to be disabled on this port, and cause the operational type of the MAU on this port (as reported by rpMauType) to transition to dot3MauType10BaseTHD.
.1.3.6.1.4.1.11.2.14.11.2.4.1.1.4,HP-ICF-8023-RPTR::hpRpMauAutoNegRemoteSignaling,INTEGER,read-only,,current,detected(1):notdetected(2),A value indicating whether the remote end of the link is using auto-negotiation signaling. It takes the value detected(1) if and only if, during the previous link negotiation, FLP Bursts were received.
.1.3.6.1.4.1.11.2.14.11.2.4.1.1.5,HP-ICF-8023-RPTR::hpRpMauAutoNegConfig,INTEGER,read-only,,current,other(1):configuring(2):complete(3):disabled(4):parallelDetectFail(5),A value indicating the current status of the auto-negotiation process. The enumeration parallelDetectFail(5) maps to a failure in parallel detection as defined in 28.2.3.1 of [IEEE 802.3 Std].
.1.3.6.1.4.1.11.2.14.11.2.4.1.1.6,HP-ICF-8023-RPTR::hpRpMauAutoNegCapReceived,BITS,read-only,,current,bOther(0):b10baseT(1):b10baseTFD(2):b100baseT4(3):b100baseTX(4):b100baseTXFD(5):b100baseT2(6):b100baseT2FD(7),A value that uniquely identifies the set of capabilities received from the remote auto-negotiation entity. Note that ports that support this MIB may be attached to remote auto-negotiation entities which have capabilities beyond the scope of this MIB.
.1.3.6.1.4.1.11.2.14.11.2.4.1.1.7,HP-ICF-8023-RPTR::hpRpMauAutoNegRestart,INTEGER,read-write,,current,restart(1):norestart(2),If the value of this object is set to restart(1) then this will force auto-negotiation to begin link renegotiation. If auto-negotiation signaling is disabled, a write to this object has no effect. Setting the value of this object to norestart(2) has no effect.
.1.3.6.1.4.1.11.2.14.11.3,HP-ICF-OID::hpicfVg,,,,,,
.1.3.6.1.4.1.11.2.14.11.3.1,HP-ICF-VG-RPTR::hpVgBasic,,,,,,
.1.3.6.1.4.1.11.2.14.11.3.1.1,HP-ICF-VG-RPTR::hpVgBasicGlobal,,,,,,
.1.3.6.1.4.1.11.2.14.11.3.1.1.1,HP-ICF-VG-RPTR::hpVgEntityName,OCTET,read-only,,current,,The local name of this 100BaseVG repeater. This is the same value as hpicfEntityName in the case where  there is Distributed Management Protocol to access this device. For SNMPv1, this name is appended to the agent  community name to obtain a community name to use to specify that the agent should proxy to this repeater. For example, if this agent has a  community with a community name of 'public', and the value of this object is 'repeater1', the  community 'public/repeater1' will specify that the agent should proxy to the public community of the repeater1 box to obtain management information about this repeater. If an agent receives a management request where  the localEntity is not specified, it will default  to the local repeater on which this agent is  executing.
.1.3.6.1.4.1.11.2.14.11.3.1.1.2,HP-ICF-VG-RPTR::hpVgRedundantUpLinksFlag,INTEGER,read-write,,current,true(1):false(2),This object is used to indicate that the hub  is configured with redundant uplink ports.
.1.3.6.1.4.1.11.2.14.11.3.1.1.3,HP-ICF-VG-RPTR::hpVgXcvrTable,,not-accessible,,current,,A table containing information about transceivers. All uplink, downlink, and redundent links are  represented in this table
.1.3.6.1.4.1.11.2.14.11.3.1.1.3.1,HP-ICF-VG-RPTR::hpVgXcvrEntry,,not-accessible,hpVgXcvrGroupIndex:hpVgXcvrIndex,current,,An entry in the transceiver table
.1.3.6.1.4.1.11.2.14.11.3.1.1.3.1.1,HP-ICF-VG-RPTR::hpVgXcvrGroupIndex,Integer32,not-accessible,,current,,The group within the repeater for which this entry  contains information. This object has the same value as the corresponding instance of icfVgGroupIndex.
.1.3.6.1.4.1.11.2.14.11.3.1.1.3.1.2,HP-ICF-VG-RPTR::hpVgXcvrIndex,Integer32,not-accessible,,current,,The transceiver within the group for which this entry contains information.
.1.3.6.1.4.1.11.2.14.11.3.1.1.3.1.3,HP-ICF-VG-RPTR::hpVgXcvrType,INTEGER,read-only,,current,other(1):unknown(2):pmdMissing(3):utp4(4):stp2(5):fibre(6),The type of physical media supported by this transceiver. One of the following values: other undefined unknown true state not known pmdMissing PMD device not attached utp4 4-pair unshielded twisted pair stp2 2-pair shielded twisted pair fibre 802.12 fibre optic cabling This object may be 'unknown' if the implementation is not capable of identifying the PMD media type, or whether or not the PMD is even present.
.1.3.6.1.4.1.11.2.14.11.3.1.1.3.1.4,HP-ICF-VG-RPTR::hpVgXcvrAssociatedPort,Integer32,read-write,,current,,The port within the group that this transceiver is  associated with. There may be multiple transceivers associated with a single port. Also, a transceiver may be moved between ports.
.1.3.6.1.4.1.11.2.14.11.3.1.1.3.1.5,HP-ICF-VG-RPTR::hpVgXcvrState,INTEGER,read-only,,current,unknown(1):inUse(2):standby(3):silent(4):linkFailure(5),This object is set to 'unknown' if the transceiver is not present or its status cannot be determined. 'inUse' indicates that the transceiver is currently selected for use by its associated port. 'standby' indicates the associated port is using another tranceiver, but this tranceiver could be used if needed. 'silent' indicates that the tranceiver is not detecting any tones on the link. 'linkFailure' indicates that the tranceiver was unable to train for some reason.
.1.3.6.1.4.1.11.2.14.11.3.1.1.3.1.6,HP-ICF-VG-RPTR::hpVgXcvrAbandonments,Counter32,read-only,,current,,The total number of times the corresponding instance of the hpVgXcvrState object has entered the 'abandoned' state. For downlink ports this object will have the value 0.
.1.3.6.1.4.1.11.2.14.11.3.1.1.3.1.7,HP-ICF-VG-RPTR::hpVgXcvrIsMovable,INTEGER,read-only,,current,true(1):false(2),A true value indicates that the transceiver can be associated with a single port from a set of multiple ports. A false value indicates that a transceiver can only be associated with a single, fixed, port
.1.3.6.1.4.1.11.2.14.11.3.1.1.4,HP-ICF-VG-RPTR::hpVgNullAddrTraining,INTEGER,read-write,,current,preventNullAddr(1):allowNullAddr(2),This object is used to control whether the repeater will allow completion of training by end-nodes using null MAC addresses. The 802.12 standard is written to disallow such training. However, some end-nodes may use this configuration at power-up before any software is loaded. If so, the user may see frequent training occurring on the repeater because of this. In addition, some end-node applications may not work when initial training fails due to the locking out of null MAC addresses. The default setting of this object is to allow null MAC addresses to train. This is recommended for most situations, despite the fact that it contradicts the 802.12 standard. For repeaters that have First Learned address security on this hub, disallowing null-address training provides the most extensive security until the ports' authorized addresses are learned. However, if this creates problems for the end-node applications, it may be necessary to instead explicitly assign the ports' authorized addresses and configure this object to allow null-address training.
.1.3.6.1.4.1.11.2.14.11.3.1.2,HP-ICF-VG-RPTR::hpVgBasicGroup,,,,,,
.1.3.6.1.4.1.11.2.14.11.3.1.2.1,HP-ICF-VG-RPTR::hpVgBasicGroupTable,,not-accessible,,current,,HP specific extensions to the vgBasicGroupTable.
.1.3.6.1.4.1.11.2.14.11.3.1.2.1.1,HP-ICF-VG-RPTR::hpVgBasicGroupEntry,,not-accessible,hpVgGrpGroupIndex,current,,An entry in the table, containing HP extensions  for a specific group.
.1.3.6.1.4.1.11.2.14.11.3.1.2.1.1.1,HP-ICF-VG-RPTR::hpVgGrpGroupIndex,Integer32,not-accessible,,current,,The group within the repeater for which this entry  contains information. This object has the same value as the corresponding instance of icfVgGroupIndex.
.1.3.6.1.4.1.11.2.14.11.3.1.2.1.1.2,HP-ICF-VG-RPTR::hpVgGrpPortsAdminStatus,OCTET,read-only,,current,,The hpVgGrpPortsAdminStatus is a bit map of the state of the icfVgPortAdminStatus object for all of the ports in this group. The object has a one bit for each port for which the value of icfVgPortAdminStatus is equal to 'enabled(1)' and a zero bit for each port for which the value of icfVgPortAdminStatus is equal to 'disabled(2)'. The bits are placed into the OCTET STRING in the  following order: octet 0 octet 1 octet 2 ... bits 7-0 bits 7-0 bits 7-0 ... ports 1-8 ports 9-16 ports 17-24 ... Values of unused bits in the last octet are  undefined.
.1.3.6.1.4.1.11.2.14.11.3.1.2.1.1.3,HP-ICF-VG-RPTR::hpVgGrpPortsTrained,OCTET,read-only,,current,,The hpVgGrpPortsTrained is a bit map which indicates which ports in this group are currently online. The object has a one bit for each port for which meets the following conditions: 1. The value of the corresponding instance of the ifVgPortAdminStatus object is equal to 'enabled(1)'. 2. The value of the corresponding instance of the icfVgPortStatus object is equal to 'active(1)'.  The object has a zero bit for each port which does not meet the above conditions. The bits are placed into the OCTET STRING in the  following order: octet 0 octet 1 octet 2 ... bits 7-0 bits 7-0 bits 7-0 ... ports 1-8 ports 9-16 ports 17-24 ... Values of unused bits in the last octet are  undefined.
.1.3.6.1.4.1.11.2.14.11.3.1.2.1.1.4,HP-ICF-VG-RPTR::hpVgGrpPortsInTraining,OCTET,read-only,,current,,The hpVgGrpPortsInTraining is a bit map which indicates which ports in this group are currently in the training state. The object has a one bit for each port which meets the following conditions: 1. The value of the corresponding instance of the ifVgPortAdminStatus object is equal to 'enabled(1)'. 2. The value of the corresponding instance of the icfVgPortStatus object is equal to  'training(3)'.  The object has a zero bit for each port which does not meet the above conditions. The bits are placed into the OCTET STRING in the  following order: octet 0 octet 1 octet 2 ... bits 7-0 bits 7-0 bits 7-0 ... ports 1-8 ports 9-16 ports 17-24 ... Values of unused bits in the last octet are  undefined.
.1.3.6.1.4.1.11.2.14.11.3.1.2.1.1.5,HP-ICF-VG-RPTR::hpVgGrpPortsCascaded,OCTET,read-only,,current,,The hpVgGrpPortsCascaded is a bit map which indicates which ports in this group have trained as cascaded repeater ports. The object has a one bit for each port which meets the following conditions: 1. The value of the corresponding instance of the ifVgPortAdminStatus object is equal to 'enabled(1)'. 2. The value of the corresponding instance of the icfVgPortStatus object is equal to  'active(1)'. 3. The value of the 'R' bit in the corresponding instance of the icfVgPortTrainingResult object is equal to one. The object has a zero bit for each port which does not meet the above conditions. The bits are placed into the OCTET STRING in the  following order: octet 0 octet 1 octet 2 ... bits 7-0 bits 7-0 bits 7-0 ... ports 1-8 ports 9-16 ports 17-24 ... Values of unused bits in the last octet are  undefined.
.1.3.6.1.4.1.11.2.14.11.3.1.2.1.1.6,HP-ICF-VG-RPTR::hpVgGrpPortsPromiscuous,OCTET,read-only,,current,,The hpVgGrpPortsPromiscuous is a bit map which indicates which ports in this group have trained for promiscuous operation. The object has a one bit for each port which meets the following conditions: 1. The value of the corresponding instance of the ifVgPortAdminStatus object is equal to 'enabled(1)'. 2. The value of the corresponding instance of the icfVgPortStatus object is equal to  'active(1)'. 3. The value of the 'PP' field in the corresponding instance of the icfVgPortTrainingResult object is equal to 01. The object has a zero bit for each port which does not meet the above conditions. The bits are placed into the OCTET STRING in the  following order: octet 0 octet 1 octet 2 ... bits 7-0 bits 7-0 bits 7-0 ... ports 1-8 ports 9-16 ports 17-24 ... Values of unused bits in the last octet are  undefined.
.1.3.6.1.4.1.11.2.14.11.3.1.3,HP-ICF-VG-RPTR::hpVgBasicPort,,,,,,
.1.3.6.1.4.1.11.2.14.11.3.1.3.1,HP-ICF-VG-RPTR::hpVgBasicPortTable,,not-accessible,,current,,HP specific extensions to the vg port table.
.1.3.6.1.4.1.11.2.14.11.3.1.3.1.1,HP-ICF-VG-RPTR::hpVgBasicPortEntry,,not-accessible,hpVgPortGroupIndex:hpVgPortIndex,current,,HP extended information about a specific vg port.
.1.3.6.1.4.1.11.2.14.11.3.1.3.1.1.1,HP-ICF-VG-RPTR::hpVgPortGroupIndex,Integer32,not-accessible,,current,,The group that contains the port for which this entry contains information.
.1.3.6.1.4.1.11.2.14.11.3.1.3.1.1.2,HP-ICF-VG-RPTR::hpVgPortIndex,Integer32,not-accessible,,current,,The port within the group for which this entry contains information.
.1.3.6.1.4.1.11.2.14.11.3.1.3.1.1.3,HP-ICF-VG-RPTR::hpVgPortPolarityReversed,INTEGER,read-only,,current,true(1):false(2),This object is used to indicate that the hub port was wired with the positive/negative polarity of its wire pairs reversed. Note that the port will continue to operate in this state, with the hub inverting the polarity internally.
.1.3.6.1.4.1.11.2.14.11.3.1.3.1.1.4,HP-ICF-VG-RPTR::hpVgPortWireSkewError,INTEGER,read-only,,current,true(1):false(2),This object is used to indicate that a wire skew error has been detected on this port.
.1.3.6.1.4.1.11.2.14.11.3.1.3.1.1.5,HP-ICF-VG-RPTR::hpVgPortAssociatedXcvrIndex,Integer32,read-write,,current,,This object is the index into the transceiver table, hpVgXcvrTable. The transceiver entry defines which transceiver is connected to the port. This object  will be set to 0 if the port is not currently associated with a transceiver
.1.3.6.1.4.1.11.2.14.11.3.1.3.1.1.6,HP-ICF-VG-RPTR::hpVgPortNumAssociatedXcvrs,Integer32,read-only,,current,,This object is the number of transceivers that are currently associated with this port via the hpVgXcvrTable.
.1.3.6.1.4.1.11.2.14.11.3.2,HP-ICF-VG-RPTR::hpVgMonitor,,,,,,
.1.3.6.1.4.1.11.2.14.11.3.2.1,HP-ICF-VG-RPTR::hpVgMonitorGlobal,,,,,,
.1.3.6.1.4.1.11.2.14.11.3.2.1.1,HP-ICF-VG-RPTR::hpVgMonCounters,,,,,,
.1.3.6.1.4.1.11.2.14.11.3.2.1.1.1,HP-ICF-VG-RPTR::hpVgMonGlbReadableFrames,Counter32,read-only,,current,,This object is the total number of good frames of valid frame length that have been received on all ports in this repeater. This counter is the summation of the values of the icfVgPortReadableFrames counter for all of the ports in this repeater.
.1.3.6.1.4.1.11.2.14.11.3.2.1.1.2,HP-ICF-VG-RPTR::hpVgMonGlbReadableOctets,Counter32,read-only,,current,,This object is a count of the total number of octets contained in good frames that have been received on all ports in this repeater. This counter is the summation of the values of the icfVgPortReadableOctets counter for all of the ports in this repeater. Note that this counter will roll over very quickly. It is provided for backward compatibility for Network Management protocols that do not support 64 bit counters (e.g. SNMP version 1).
.1.3.6.1.4.1.11.2.14.11.3.2.1.1.3,HP-ICF-VG-RPTR::hpVgMonGlbUnreadableOctets,Counter32,read-only,,current,,This object is a count of the total number of octets contained in invalid frames that have been received on all ports in this repeater. This counter is the summation of the values of icfVgPortUnreadableOctets counter for all of the ports in this repeater. Note that this counter will roll over very quickly. It is provided for backward compatibility for Network Management protocols that do not support 64 bit counters (e.g. SNMP version 1).
.1.3.6.1.4.1.11.2.14.11.3.2.1.1.4,HP-ICF-VG-RPTR::hpVgMonGlbHighPriorityFrames,Counter32,read-only,,current,,This object is a count of the total number of high priority frames that have been received on all ports in this repeater. This counter is a summation of the values of the icfVgPortHighPriorityFrames counter for all of the ports in this repeater.
.1.3.6.1.4.1.11.2.14.11.3.2.1.1.5,HP-ICF-VG-RPTR::hpVgMonGlbHighPriorityOctets,Counter32,read-only,,current,,This object is a count of the total number of octets contained in high priority frames that have been received on all ports of this repeater. This counter is a summation of the values of the icfVgPortHighPriorityOctets counter for all of the ports in this repeater. Note that this counter will roll over very quickly. It is provided for backward compatibility for Network Management protocols that do not support 64 bit counters (e.g. SNMP version 1).
.1.3.6.1.4.1.11.2.14.11.3.2.1.1.6,HP-ICF-VG-RPTR::hpVgMonGlbBroadcastFrames,Counter32,read-only,,current,,This object is a count of the total number of broadcast packets that have been received on all ports in this repeater. This counter is a summation of the values of the icfVgPortBroadcastFrames counter for all of the ports in this repeater.
.1.3.6.1.4.1.11.2.14.11.3.2.1.1.7,HP-ICF-VG-RPTR::hpVgMonGlbMulticastFrames,Counter32,read-only,,current,,This object is a count of the total number of multicast packets that have been received on all ports in this repeater. This counter is a summation of the values of the icfVgPortMulticastFrames counter for all of the ports in this repeater.
.1.3.6.1.4.1.11.2.14.11.3.2.1.1.8,HP-ICF-VG-RPTR::hpVgMonGlbIPMFrames,Counter32,read-only,,current,,This object is a count of the total number of frames that have been received on all ports in this repeater with an invalid packet marker. This counter is a summation of the values of the icfVgPortIPMFrames counter for all of the ports in this repeater.
.1.3.6.1.4.1.11.2.14.11.3.2.1.1.9,HP-ICF-VG-RPTR::hpVgMonGlbDataErrorFrames,Counter32,read-only,,current,,This object is a count of the total number of errored frames received on all ports in this repeater. This counter is a summation of the values of the icfVgPortDataErrorFrames counter for all of the ports in this repeater.
.1.3.6.1.4.1.11.2.14.11.3.2.1.1.10,HP-ICF-VG-RPTR::hpVgMonGlbPriorityPromotions,Counter32,read-only,,current,,This object is a count of the total number of times the priority promotion timer has expired on any port in this repeater. This counter is a summation of the values of the  icfVgPortPriorityPromotions counter for all of the ports in this repeater.
.1.3.6.1.4.1.11.2.14.11.3.2.1.1.11,HP-ICF-VG-RPTR::hpVgMonGlbHCReadableOctets,Counter64,read-only,,current,,This object is a count of the total number of octets contained in good frames that have been received on all ports in this repeater. This counter is the summation of the values of the icfVgPortReadableOctets counter for all of the ports in this repeater. This counter is a 64 bit version of hpVgMonGlbReadableOctets. It should be used by Network Management protocols which support 64 bit counters (e.g. SNMPv2).
.1.3.6.1.4.1.11.2.14.11.3.2.1.1.12,HP-ICF-VG-RPTR::hpVgMonGlbHCUnreadableOctets,Counter64,read-only,,current,,This object is a count of the total number of octets contained in invalid frames that have been received on all ports in this repeater. This counter is the summation of the values of icfVgPortUnreadableOctets counter for all of the ports in this repeater. This counter is a 64 bit version of hpVgMonGlbUnreadableOctets. It should be used by Network Management protocols which support 64 bit counters (e.g. SNMPv2).
.1.3.6.1.4.1.11.2.14.11.3.2.1.1.13,HP-ICF-VG-RPTR::hpVgMonGlbHCHighPriorityOctets,Counter64,read-only,,current,,This object is a count of the total number of octets contained in high priority frames that have been received on all ports of this repeater. This counter is a summation of the values of the icfVgPortHighPriorityOctets counter for all of the ports in this repeater. This counter is a 64 bit version of hpVgMonGlbHighPriorityOctets. It should be used by Network Management protocols which support 64 bit counters (e.g. SNMPv2).
.1.3.6.1.4.1.11.2.14.11.3.2.1.1.14,HP-ICF-VG-RPTR::hpVgMonGlbHCNormPriorityOctets,Counter64,read-only,,current,,This object is a count of the total number of octets contained in normal priority frames that have been received on all ports of this repeater. This counter is a summation of the values of the icfVgPortNormPriorityOctets counter for all of the ports in this repeater. This counter is a 64 bit version of hpVgMonGlbNormPriorityOctets. It should be used by Network Management protocols which support 64 bit counters (e.g. SNMPv2).
.1.3.6.1.4.1.11.2.14.11.3.2.1.1.15,HP-ICF-VG-RPTR::hpVgMonGlbNormPriorityFrames,Counter32,read-only,,current,,This object is a count of the total number of normal priority frames received on all ports in this repeater. This counter is a summation of the values of the icfVgPortNormPriorityFrames counter for all of the ports in this repeater.
.1.3.6.1.4.1.11.2.14.11.3.2.1.1.16,HP-ICF-VG-RPTR::hpVgMonGlbNormPriorityOctets,Counter32,read-only,,current,,This object is a count of the total number of normal priority octets received on all ports in this repeater. This counter is a summation of the values of the icfVgPortNormPriorityOctets counter for all of the ports in this repeater.
.1.3.6.1.4.1.11.2.14.11.3.2.1.1.17,HP-ICF-VG-RPTR::hpVgMonGlbNullAddressedFrames,Counter32,read-only,,current,,This object is a count of the total number of null addressed packets that have been received on all ports. This counter is a summation of the values of the icfVgPortNullAddressedFrames counter for the ports in this repeater.
.1.3.6.1.4.1.11.2.14.11.3.2.1.1.18,HP-ICF-VG-RPTR::hpVgMonGlbOversizeFrames,Counter32,read-only,,current,,This object is a count of the total number of  oversized frames that have been received on all ports. This counter is a summation of the values of the icfVgPortOversizeFrames counter for the ports in this repeater.
.1.3.6.1.4.1.11.2.14.11.3.2.1.1.19,HP-ICF-VG-RPTR::hpVgMonGlbTransitionToTrainings,Counter32,read-only,,current,,This object is a count of the total number of  transitions to training on all ports. This counter is a summation of the values of the icfVgPortTransitionToTrainings counter for the ports in this repeater.
.1.3.6.1.4.1.11.2.14.11.3.2.2,HP-ICF-VG-RPTR::hpVgMonitorGroup,,,,,,
.1.3.6.1.4.1.11.2.14.11.3.2.3,HP-ICF-VG-RPTR::hpVgMonitorPort,,,,,,
.1.3.6.1.4.1.11.2.14.11.4,HP-ICF-OID::hpicfGenericRepeater,,,,,,
.1.3.6.1.4.1.11.2.14.11.4.1,HP-ICF-GENERIC-RPTR::hpGRpBasic,,,,,,
.1.3.6.1.4.1.11.2.14.11.4.1.1,HP-ICF-GENERIC-RPTR::hpGRpBasicGlobal,,,,,,
.1.3.6.1.4.1.11.2.14.11.4.1.1.1,HP-ICF-GENERIC-RPTR::hpGRpSelfHealEnable,INTEGER,read-write,,current,enabled(1):disabled(2),This flag controls whether or not the device will send self healing packets. Self healing packets are normally sent once per second by the agent when no other traffic is present. When there is no traffic present on a network, there is no way to detect cabling problems (or the repair of cabling problems) and status LEDs are not always correct. Enabling this flag allows the agent to detect cabling problems on an idle network. This flag can be disabled if self healing packets are not wanted. On the 100BaseVG-AnyLAN SNMP/Bridge card, these packets are addressed to a unique unused unicast station address which has been reserved by HP for this purpose. On 802.3 repeaters, these packets are self addressed. On an 802.3 repeater, this flag MUST be enabled when using the Robust Port Healing feature. Without Robust Port Healing either a good transmit or a good receive will reconnect an autopartitioned port. With Robust Port Healing the criteria is more restrictive and only a good transmit will heal a segmented port. If all ports are segmented, the repeater will not repeat anything until the agent transmits a self healing packet and reconnects the autopartitioned ports.
.1.3.6.1.4.1.11.2.14.11.4.1.1.2,HP-ICF-GENERIC-RPTR::hpGRpRepeaterTable,,not-accessible,,current,,A table containing generic information about the current logical repeaters in this managed system.
.1.3.6.1.4.1.11.2.14.11.4.1.1.2.1,HP-ICF-GENERIC-RPTR::hpGRpRepeaterEntry,,not-accessible,hpGRpRepeaterIndex,current,,An entry in the table, containing information about a single logical repeater.
.1.3.6.1.4.1.11.2.14.11.4.1.1.2.1.1,HP-ICF-GENERIC-RPTR::hpGRpRepeaterIndex,Integer32,not-accessible,,current,,This object uniquely identifies the logical repeater in the managed system for which this entry contains information. This object will have the same value as the corresponding 'repeater index' object in the media-specific repeater MIB for this repeater. Note that it will also have the same value as the instance of the Entity MIB's entLogicalIndex for the entry in the entLogicalTable that represents this repeater.
.1.3.6.1.4.1.11.2.14.11.4.1.1.2.1.2,HP-ICF-GENERIC-RPTR::hpGRpRepeaterIfIndex,Integer32,read-only,,current,,The interface on the agent that is used to transmit and receive packets through this repeater. The ifEntry identified by this value is the same entry identified by the same value of the ifIndex object. The value zero indicates that the agent has no interface through which it can send and receive packets on this repeater.
.1.3.6.1.4.1.11.2.14.11.4.1.1.2.1.3,HP-ICF-GENERIC-RPTR::hpGRpRepeaterName,OCTET,read-write,,current,,A friendly name for this repeater. Management applications can use this to configure a user friendly name for this logical repeater.
.1.3.6.1.4.1.11.2.14.11.4.1.1.2.1.4,HP-ICF-GENERIC-RPTR::hpGRpRepeaterVlanIndex,Integer32,read-write,,current,,The virtual LAN that this repeater is on. Note that setting this object does not affect the operation of the repeater in any way. It is a 'notepad' for management applications to allow them to record which VLAN on a connected switch this logical repeater is connected to.
.1.3.6.1.4.1.11.2.14.11.4.2,HP-ICF-GENERIC-RPTR::hpicfGRpBackupLinks,,,,,,
.1.3.6.1.4.1.11.2.14.11.4.2.1,HP-ICF-GENERIC-RPTR::hpicfBackupLinkNextIndex,Integer32,read-write,,current,,A currently unassigned value of hpicfBackupLinkIndex. The value 0 indicates that no unassigned values are available. In order to cause a non-zero value of this object to be assigned for use as the hpicfBackupLinkIndex of a future backup link configuration, it must be successfully modified by a set operation. When modified by a set operation, the new value must precisely match the value presently held by the object. If not, the management protocol set operation will fail. Immediately after the completion of a successful set operation, the agent must modify the value of this object. The algorithm for modifying the value is implementation-dependent, and may use a subset of values within the legal range. However, the agent must guarantee that the new value is not assigned to any in-use value of hpicfBackupLinkIndex. A management station creates a new backup link using this algorithm: - issue a management protocol retrieval operation to obtain the value of hpicfBackupLinkNextIndex; if the retrieved value is zero, a new backup link cannot be created at this time; - issue a management protocol set operation for hpicfBackupLinkNextIndex, supplying the same value as obtained in the previous step; - if the set operation succeeds, use the supplied value as the hpicfBackupLinkIndex of the new backup link; if the set operation fails, go back to the first step and obtain a new value for hpicfBackupLinkNextIndex; - issue a management protocol set operation to create an instance of the hpicfBackupLinkStatus object setting its value to 'createAndGo' or 'createAndWait' (as specified in the description of the RowStatus textual convention). Note that the set of hpicfBackupLinkNextIndex and the instance of hpicfBackupLinkStatus may occur in the same set operation if desired.
.1.3.6.1.4.1.11.2.14.11.4.2.2,HP-ICF-GENERIC-RPTR::hpicfBackupLinkTable,,not-accessible,,current,,A table of backup link configuration entries. For a given backup link, the agent will periodically send a test packet to the device at the specified address. If no response is received after a configured number of test packets are sent, the agent will enable the backup port and disable the primary port, and will stop sending periodic test packets. After the agent has switched to the backup link, the primary port will need to explicitly be re-enabled via management action in order to return to using the primary port. At any time, a management station can examine the associated instance of the hpicfBackupLinkState object to determine if the backup port is currently in use. The backup link algorithm enables and disables the backup port by modifying the instance of the rptrPortAdminStatus object corresponding to that port. After the backup port has been enabled by the backup link algorithm, if the primary port is subsequently enabled via management action, the backup port will be turned off and the periodic test packets will resume. When a row of this table is activated, the backup port will be disabled, the primary port will be enabled, and the periodic test packets will be sent. The time between test packets is configurable using the associated instance of the hpicfBackupLinkTestTime object. The number of failures needed to switch to the backup port is configurable using the associated instance of the hpicfBackupLinkConsecFailures object. The backup link function can be disabled by setting the relevant instance of the hpicfBackupLinkStatus object to either 'notInService' or 'destroy'. Note that the primary port for a backup link must be mapped to a repeater segment that the agent is capable of transmitting through. In addition, a given port cannot be used in more than one active backup link at the same time.
.1.3.6.1.4.1.11.2.14.11.4.2.2.1,HP-ICF-GENERIC-RPTR::hpicfBackupLinkEntry,,not-accessible,hpicfBackupLinkIndex,current,,A row in the table, containing information about a single backup link.
.1.3.6.1.4.1.11.2.14.11.4.2.2.1.1,HP-ICF-GENERIC-RPTR::hpicfBackupLinkIndex,Integer32,not-accessible,,current,,The value of this object uniquely identifies this backup link.
.1.3.6.1.4.1.11.2.14.11.4.2.2.1.2,HP-ICF-GENERIC-RPTR::hpicfBackupLinkPrimaryGroup,Integer32,read-create,,current,,The group containing the primary port for this backup link.
.1.3.6.1.4.1.11.2.14.11.4.2.2.1.3,HP-ICF-GENERIC-RPTR::hpicfBackupLinkPrimaryPort,Integer32,read-create,,current,,The port number within the group of the primary port for this backup link.
.1.3.6.1.4.1.11.2.14.11.4.2.2.1.4,HP-ICF-GENERIC-RPTR::hpicfBackupLinkBackupGroup,Integer32,read-create,,current,,The group containing the backup port for this backup link.
.1.3.6.1.4.1.11.2.14.11.4.2.2.1.5,HP-ICF-GENERIC-RPTR::hpicfBackupLinkBackupPort,Integer32,read-create,,current,,The port number within the group of the backup port for this backup link.
.1.3.6.1.4.1.11.2.14.11.4.2.2.1.6,HP-ICF-GENERIC-RPTR::hpicfBackupLinkAddress,OCTET,read-create,,current,,The MAC address of the device to which periodic test packets are sent in order to determine if the primary link is operational.
.1.3.6.1.4.1.11.2.14.11.4.2.2.1.7,HP-ICF-GENERIC-RPTR::hpicfBackupLinkTestTime,Integer32,read-create,,current,,The frequency, in seconds, between sending periodic test packets. The test packet response timeout is fixed at 500ms.
.1.3.6.1.4.1.11.2.14.11.4.2.2.1.8,HP-ICF-GENERIC-RPTR::hpicfBackupLinkConsecFailures,Integer32,read-create,,current,,The number of consecutive test packet failures which will cause the agent to switch to the backup port (i.e., backup port turned on, primary port turned off). A value of one is generally not recommended and will cause the backup link to be enabled upon the first failure.
.1.3.6.1.4.1.11.2.14.11.4.2.2.1.9,HP-ICF-GENERIC-RPTR::hpicfBackupLinkState,INTEGER,read-only,,current,notActive(1):usingPrimary(2):usingBackup(3),The current state of this backup link. One of the following values: notActive - backup link not running because this row has not yet been made active usingPrimary - backup link is running and using the primary port usingBackup - backup link test has failed; the primary port has been disabled  and the backup port has been enabled
.1.3.6.1.4.1.11.2.14.11.4.2.2.1.10,HP-ICF-GENERIC-RPTR::hpicfBackupLinkFailEventIndex,Integer32,read-create,,current,,The index of the eventEntry in the RMON MIB that will be triggered whenever the value of hpicfBackupLinkState changes from 'usingPrimary' to 'usingBackup'. The eventEntry identified by a particular value of this index is the same as identified by the same value of the eventIndex object. If there is no corresponding entry in the eventTable, then no association exists. In particular, if this value is zero, no associated event will be generated, as zero is not a valid event index.
.1.3.6.1.4.1.11.2.14.11.4.2.2.1.11,HP-ICF-GENERIC-RPTR::hpicfBackupLinkStatus,INTEGER,read-create,,current,active(1):notInService(2):notReady(3):createAndGo(4):createAndWait(5):destroy(6),The status of this entry. This object may not be set to 'active' unless the corresponding instance of hpicfBackupLinkAddress has been set to a valid unicast address, the corresponding instances of hpicfBackupLinkPrimaryGroup, hpicfBackupLinkPrimaryPort, hpicfBackupLinkBackupGroup, and hpicfBackupLinkBackupPort have been configured to refer to two existing ports and that those ports are not used in any other active backup link configuration, and the primary port is mapped to a repeater segment which the agent is capable of transmitting through.
.1.3.6.1.4.1.11.2.14.11.4.3,HP-ICF-GENERIC-RPTR::hpGRpPortMapping,,,,,,
.1.3.6.1.4.1.11.2.14.11.4.3.1,HP-ICF-GENERIC-RPTR::hpGRpPMSegmentTable,,not-accessible,,current,,A table for configuring segment-to-repeater mapping for repeater segments in this managed system.
.1.3.6.1.4.1.11.2.14.11.4.3.1.1,HP-ICF-GENERIC-RPTR::hpGRpPMSegmentEntry,,not-accessible,hpGRpPMSegmentIndex,current,,An entry in the table, containing mapping information about a single repeater segment.
.1.3.6.1.4.1.11.2.14.11.4.3.1.1.1,HP-ICF-GENERIC-RPTR::hpGRpPMSegmentIndex,Integer32,not-accessible,,current,,The value of an instance of this object uniquely identifies a physical repeater segment in this managed system. The value of an instance of this object will be equal to the instance of the Entity MIB's entPhysicalIndex for the entry in the entPhysicalTable that represents this segment.
.1.3.6.1.4.1.11.2.14.11.4.3.1.1.3,HP-ICF-GENERIC-RPTR::hpGRpPMCurrentRptrIndex,Integer32,read-write,,current,,The index of the repeater that this segment is currently connected to. Changing this value has the effect of moving all ports on this segment to a different repeater. The hpGRpPMSegAllowedRptrTable should be consulted to determine which repeaters this segment can be connected to.
.1.3.6.1.4.1.11.2.14.11.4.3.2,HP-ICF-GENERIC-RPTR::hpGRpPMSegAllowedRptrTable,,not-accessible,,current,,This table is used to inform a management application about which repeaters a physical segment is able to be connected to. There is one row in this table for each allowable segment-to-repeater connection.
.1.3.6.1.4.1.11.2.14.11.4.3.2.1,HP-ICF-GENERIC-RPTR::hpGRpPMSegAllowedRptrEntry,,not-accessible,hpGRpPMSegmentIndex:hpGRpPMSegAllowedRptrIndex,current,,A row in the table, containing a single allowable segment-to-repeater connection. The presence of a row indicates that the segment identified by hpGRpPMSegmentIndex can be mapped to the repeater identified by hpGRpPMSegAllowedRptrIndex.
.1.3.6.1.4.1.11.2.14.11.4.3.2.1.1,HP-ICF-GENERIC-RPTR::hpGRpPMSegAllowedRptrIndex,Integer32,read-only,,current,,The repeater index that identifies a repeater that this segment is able to be connected to.
.1.3.6.1.4.1.11.2.14.11.4.3.3,HP-ICF-GENERIC-RPTR::hpGRpPMPortTable,,not-accessible,,current,,A table for configuring port-to-repeater mapping for repeater ports in this managed system.
.1.3.6.1.4.1.11.2.14.11.4.3.3.1,HP-ICF-GENERIC-RPTR::hpGRpPMPortEntry,,not-accessible,hpGRpPMPortGroupIndex:hpGRpPMPortIndex,current,,An entry in the table, containing mapping information about a single repeater port.
.1.3.6.1.4.1.11.2.14.11.4.3.3.1.1,HP-ICF-GENERIC-RPTR::hpGRpPMPortGroupIndex,Integer32,not-accessible,,current,,The group containing the port for which this entry contains mapping information.
.1.3.6.1.4.1.11.2.14.11.4.3.3.1.2,HP-ICF-GENERIC-RPTR::hpGRpPMPortIndex,Integer32,not-accessible,,current,,The port within the group for which this entry contains mapping information.
.1.3.6.1.4.1.11.2.14.11.4.3.3.1.3,HP-ICF-GENERIC-RPTR::hpGRpPMPortEntPhysicalIndex,Integer32,read-only,,current,,This object indicates which entry in the Entity MIB's entPhysicalTable represents this port. The entPhysicalEntry identified by this value is the same entry identified by the same value of the entPhysicalIndex object.
.1.3.6.1.4.1.11.2.14.11.4.3.3.1.4,HP-ICF-GENERIC-RPTR::hpGRpPMPortCurrentRptrIndex,Integer32,read-write,,current,,The index of the repeater that this port is currently mapped to. Changing this value has the effect of moving this port to a different repeater. The hpGRpPMPortAllowedRptrTable should be consulted to determine which repeaters this port can be mapped to. A value of zero indicates that this port is currently not a member of any repeater.
.1.3.6.1.4.1.11.2.14.11.4.3.4,HP-ICF-GENERIC-RPTR::hpGRpPMPortAllowedRptrTable,,not-accessible,,current,,This table is used to inform a management application about which repeaters a logical port is able to be mapped to. There is one row in this table for each allowable port to repeater mapping.
.1.3.6.1.4.1.11.2.14.11.4.3.4.1,HP-ICF-GENERIC-RPTR::hpGRpPMPortAllowedRptrEntry,,not-accessible,hpGRpPMPortGroupIndex:hpGRpPMPortIndex:hpGRpPMPortAllowedRptrIndex,current,,A row in the table, containing a single allowable port to repeater mapping. The presence of a row indicates that the port identified by hpGRpPMPortGroupIndex, hpGRpPMPortIndex can be mapped to the repeater identified by hpGRpPMPortAllowedRptrIndex.
.1.3.6.1.4.1.11.2.14.11.4.3.4.1.1,HP-ICF-GENERIC-RPTR::hpGRpPMPortAllowedRptrIndex,Integer32,read-only,,current,,The repeater index that identifies a repeater that this port is able to be mapped to.
.1.3.6.1.4.1.11.2.14.11.4.4,HP-ICF-GENERIC-RPTR::hpGRpLoadBalancing,,,,,,
.1.3.6.1.4.1.11.2.14.11.4.4.1,HP-ICF-GENERIC-RPTR::hpGRpPortMapAutoConfigEnable,INTEGER,read-write,,current,enabled(1):disabled(2),If this object has the value 'enabled', when a switch is discovered in the stack, the repeater ports will be evenly distributed across the repeater segments if they had not previously been assigned to segments (in other words, if they are in their default state). If this object has the value 'disabled', this automatic distribution of ports will not occur.
.1.3.6.1.4.1.11.2.14.11.4.4.2,HP-ICF-GENERIC-RPTR::hpGRpLoadBalanceNow,INTEGER,read-write,,current,cantUndo(1):balancing(2):completed(3):undoLast(4),Setting this object to 'balancing' will cause the agent to distribute ports in the stack across the repeater segments, attempting to balance the traffic load on each segment. When the agent has finished the load balancing, it will set the value of this object to 'completed'. Setting this object to 'undoLast' will cause the agent to return all of the ports to the segment they were on before the last load balancing. This object will have the value of 'cantUndo' if there has been no load balancing since the last agent reset or if the last load balancing has already been undone. This object can only be set to 'undoLast' when its current value is 'completed'.
.1.3.6.1.4.1.11.2.14.11.4.4.3,HP-ICF-GENERIC-RPTR::hpGRpLastLoadBalanceTime,TimeTicks,read-only,,current,,This object contains the value of sysUpTime for the last time the hpGRPLoadBalanceNow object was set to 'balancing'. If load balancing has not been performed since the last agent reset, this object will have the value 0.
.1.3.6.1.4.1.11.2.14.11.4.5,HP-ICF-GENERIC-RPTR::hpicfGRpSwitchConfig,,,,,,
.1.3.6.1.4.1.11.2.14.11.4.5.1,HP-ICF-GENERIC-RPTR::hpicfGRpSwitchTable,,not-accessible,,current,,A table of switches, both internal and external, connected to ports in this repeater system. Typically, internal switches are added by the agent and cannot be removed by a management operation. External switches may be added or removed by management operations using the hpicfGRpSwitchStatus object.
.1.3.6.1.4.1.11.2.14.11.4.5.1.1,HP-ICF-GENERIC-RPTR::hpicfGRpSwitchEntry,,not-accessible,hpicfGRpSwitchIndex,current,,An entry in the table, representing a single attached switch.
.1.3.6.1.4.1.11.2.14.11.4.5.1.1.1,HP-ICF-GENERIC-RPTR::hpicfGRpSwitchIndex,Integer32,not-accessible,,current,,An index used to uniquely identify this switch.
.1.3.6.1.4.1.11.2.14.11.4.5.1.1.2,HP-ICF-GENERIC-RPTR::hpicfGRpSwitchType,INTEGER,read-only,,current,internal(1):external(2),This object indicates whether this switch is an internal switch card or a switch external to the repeater system. This object will always be equal to 'external' for rows that are created using hpicfGRpSwitchStatus. For internal switches, the type of internal switch can be determined by examining the relevant instance of the entPhysicalType object.
.1.3.6.1.4.1.11.2.14.11.4.5.1.1.3,HP-ICF-GENERIC-RPTR::hpicfGRpSwitchEntPhysicalIndex,Integer32,read-only,,current,,For an internal switch, this object is the index in the entPhysicalTable for the internal switch card. For an external switch, the value of this object will be zero.
.1.3.6.1.4.1.11.2.14.11.4.5.1.1.4,HP-ICF-GENERIC-RPTR::hpicfGRpSwitchLinkCount,Integer32,read-create,,current,,The number of links from this switch's ports to repeater ports in this repeater system. For internal switches, this object cannot be modified by a network management operation. For an external switch, when this object is set, a number of rows will be added to the hpicfGRpSwitchLinkTable equal to the value of this object. The values of hpicfGRpSwitchLinkIndex will be numbered from 1 to the value of this object. An instance of this object may not be modified if the corresponding instance of the hpicfGRpSwitchStatus object would be equal to 'active' both before and after the modification attempt.
.1.3.6.1.4.1.11.2.14.11.4.5.1.1.5,HP-ICF-GENERIC-RPTR::hpicfGRpSwitchStatus,INTEGER,read-create,,current,active(1):notInService(2):notReady(3):createAndGo(4):createAndWait(5):destroy(6),The status of this hpicfGRpSwitchEntry. An entry may not exist in the active state unless the associated instance of the hpicfGRpSwitchLinkCount has been set to a non-zero value, and all associated instances of the hpicfGRpSwitchLinkRptrGroup and hpicfGRpSwitchLinkRptrPort objects have been set to non-zero values. If this object is set to 'destroy', all associated entries in the hpicfGRpSwitchLinkTable shall be deleted.
.1.3.6.1.4.1.11.2.14.11.4.5.2,HP-ICF-GENERIC-RPTR::hpicfGRpSwitchLinkTable,,not-accessible,,current,,A table of links to switch ports for both internal and external switches that are connected to repeater ports in this repeater system.
.1.3.6.1.4.1.11.2.14.11.4.5.2.1,HP-ICF-GENERIC-RPTR::hpicfGRpSwitchLinkEntry,,not-accessible,hpicfGRpSwitchIndex:hpicfGRpSwitchLinkIndex,current,,An entry in the table, representing a single link to a switch port.
.1.3.6.1.4.1.11.2.14.11.4.5.2.1.1,HP-ICF-GENERIC-RPTR::hpicfGRpSwitchLinkIndex,Integer32,not-accessible,,current,,An identifier that uniquely identifies this switch link among all of the links associated with this switch. The values of this object are numbered consecutively from 1 to the value of the instance of the hpicfGRpSwitchLinkCount associated with this switch.
.1.3.6.1.4.1.11.2.14.11.4.5.2.1.2,HP-ICF-GENERIC-RPTR::hpicfGRpSwitchLinkRptrGroup,Integer32,read-write,,current,,The group containing the repeater port to which this switch link is attached. For internal switches, this object may not be modified by a network management operation. For external switches, an instance of this object will be created with the value of zero. It must be modified to a non-zero value corresponding to a known repeater group index before the instance of the hpicfGRpSwitchStatus object associated with this switch can be set to 'active'. An instance of this object may not be modified if the instance of the hpicfGRpSwitchStatus object associated with this switch would be equal to 'active' both before and after the modification attempt.
.1.3.6.1.4.1.11.2.14.11.4.5.2.1.3,HP-ICF-GENERIC-RPTR::hpicfGRpSwitchLinkRptrPort,Integer32,read-write,,current,,The repeater port within the group to which this switch link is attached. For internal switches, this object may not be modified by a network management operation. For external switches, an instance of this object will be created with the value of zero. It must be modified to a non-zero value corresponding to a known repeater port index before the instance of the hpicfGRpSwitchStatus object associated with this switch can be set to 'active'. An instance of this object may not be modified if the instance of the hpicfGRpSwitchStatus object associated with this switch would be equal to 'active' both before and after the modification attempt.
.1.3.6.1.4.1.11.2.14.11.4.5.2.1.4,HP-ICF-GENERIC-RPTR::hpicfGRpSwitchLinkState,INTEGER,read-write,,current,active(1):redundant(2),This object indicates whether this switch link is enabled ('active') or disabled ('redundant') due to one of the following: - There are more links to this switch than there are repeater segments. - The agent detected a switching loop. - The link is intended as a backup connection for other links on this switch. There can only be one active link to the switch from each repeater segment, otherwise you will have a switching loop. Therefore, if more than one switch link is connected to repeater ports on the same repeater segment, only one of them may have the value 'active'. All of the others must have the value 'redundant.
.1.3.6.1.4.1.11.2.14.11.4.5.3,HP-ICF-GENERIC-RPTR::hpicfGRpCurrentPrimarySwitch,Integer32,read-only,,current,,The hpicfGRpSwitchIndex of the switch that is currently the primary switch for this stack. The automatic port-to-segment distribution feature will make decisions based on which switch is the primary switch. A value of 0 indicates that there are no internal switches in the system, and no external switches have been configured.
.1.3.6.1.4.1.11.2.14.11.4.5.4,HP-ICF-GENERIC-RPTR::hpicfGRpDesiredPrimarySwitch,Integer32,read-write,,current,,The hpicfGRpSwitchIndex of the switch that the network administrator wants to be the primary switch for this stack. If the value of this object is zero, the agent will select the primary switch. Note that the agent may choose to use a different switch as the primary switch if it is unable to locate the switch identified by this object.
.1.3.6.1.4.1.11.2.14.11.4.6,HP-ICF-GENERIC-RPTR::hpicfGRpBridge,,,,,,
.1.3.6.1.4.1.11.2.14.11.4.6.1,HP-ICF-GENERIC-RPTR::hpGRpBridgeAdminStatus,INTEGER,read-write,,current,enable(1):disable(2),
.1.3.6.1.4.1.11.2.14.11.5,HP-ICF-OID::hpicfSwitch,,,,,,
.1.3.6.1.4.1.11.2.14.11.5.1,HP-ICF-OID::hpSwitch,,,,,,
.1.3.6.1.4.1.11.2.14.11.5.1.1,HP-ICF-OID::hpOpSystem,,,,,,
.1.3.6.1.4.1.11.2.14.11.5.1.1.1,NETSWITCH-MIB::hpBuf,,,,,,
.1.3.6.1.4.1.11.2.14.11.5.1.1.1.1,NETSWITCH-MIB::hpMsgBuf,,,,,,
.1.3.6.1.4.1.11.2.14.11.5.1.1.1.1.1,NETSWITCH-MIB::hpMsgBufTable,,not-accessible,,mandatory,,A table that contains information on all the  Message buffers for each slot.
.1.3.6.1.4.1.11.2.14.11.5.1.1.1.1.1.1,NETSWITCH-MIB::hpMsgBufEntry,,not-accessible,hpMsgBufSlotIndex,mandatory,,Information about a slot in a chassis
.1.3.6.1.4.1.11.2.14.11.5.1.1.1.1.1.1.1,NETSWITCH-MIB::hpMsgBufSlotIndex,INTEGER,read-only,,mandatory,,The slot number within the box for which this  entry contains information.
.1.3.6.1.4.1.11.2.14.11.5.1.1.1.1.1.1.2,NETSWITCH-MIB::hpMsgBufCorrupted,Counter32,read-only,,mandatory,,The number of times a corrupted buffer was deleted.
.1.3.6.1.4.1.11.2.14.11.5.1.1.1.1.1.1.3,NETSWITCH-MIB::hpMsgBufFree,INTEGER,read-only,,mandatory,,The number of message buffers available for internal VME transfers or external transfers, respectively. Because switch operations and application software modules impose some overhead on global memory buffers, the number of buffers available for data transfers is less than the total number of buffers allocated when the switch boots.
.1.3.6.1.4.1.11.2.14.11.5.1.1.1.1.1.1.4,NETSWITCH-MIB::hpMsgBufInit,INTEGER,read-only,,mandatory,,The number of message buffers allocated when the switch booted.
.1.3.6.1.4.1.11.2.14.11.5.1.1.1.1.1.1.5,NETSWITCH-MIB::hpMsgBufMin,INTEGER,read-only,,mandatory,,The smallest number of message buffers available since the switch booted.
.1.3.6.1.4.1.11.2.14.11.5.1.1.1.1.1.1.6,NETSWITCH-MIB::hpMsgBufMiss,Counter32,read-only,,mandatory,,The number of times that the switch was unable to obtain a message buffer. Failure to obtain a buffer indicates that buffers were busy. This parameter is directly related to hpMsgBufMin. If hpMsgBufMiss is greater than 0, hpMsgBufMin must equal 0. Conversely, if hpMsgBufMiss equals 0, then hpMsgBufMin must be greater than 0.
.1.3.6.1.4.1.11.2.14.11.5.1.1.1.1.1.1.7,NETSWITCH-MIB::hpMsgBufSize,INTEGER,read-only,,mandatory,,The size of the message buffer in bytes.
.1.3.6.1.4.1.11.2.14.11.5.1.1.1.2,NETSWITCH-MIB::hpPktBuf,,,,,,
.1.3.6.1.4.1.11.2.14.11.5.1.1.1.2.1,NETSWITCH-MIB::hpPktBufTable,,not-accessible,,mandatory,,A table that contains information on all the  Packet buffers for each slot.
.1.3.6.1.4.1.11.2.14.11.5.1.1.1.2.1.1,NETSWITCH-MIB::hpPktBufEntry,,not-accessible,hpPktBufSlotIndex,mandatory,,Information about a slot in a chassis
.1.3.6.1.4.1.11.2.14.11.5.1.1.1.2.1.1.1,NETSWITCH-MIB::hpPktBufSlotIndex,INTEGER,read-only,,mandatory,,The slot number within the box for which this  entry contains information.
.1.3.6.1.4.1.11.2.14.11.5.1.1.1.2.1.1.2,NETSWITCH-MIB::hpPktBufCorrupted,Counter32,read-only,,mandatory,,The number of times a corrupted buffer was deleted.
.1.3.6.1.4.1.11.2.14.11.5.1.1.1.2.1.1.3,NETSWITCH-MIB::hpPktBufFree,INTEGER,read-only,,mandatory,,The number of packet buffers available for internal VME transfers or external transfers, respectively. Because switch operations and application software modules impose some overhead on global memory buffers, the number of buffers available for data transfers is less than the total number of buffers allocated when the switch boots.
.1.3.6.1.4.1.11.2.14.11.5.1.1.1.2.1.1.4,NETSWITCH-MIB::hpPktBufInit,INTEGER,read-only,,mandatory,,The number of packet buffers allocated when the switch booted.
.1.3.6.1.4.1.11.2.14.11.5.1.1.1.2.1.1.5,NETSWITCH-MIB::hpPktBufMin,INTEGER,read-only,,mandatory,,The smallest number of packet buffers available since the switch booted.
.1.3.6.1.4.1.11.2.14.11.5.1.1.1.2.1.1.6,NETSWITCH-MIB::hpPktBufMiss,Counter32,read-only,,mandatory,,The number of times that the switch was unable to obtain a packet buffer. Failure to obtain a buffer indicates that buffers were busy. This parameter is directly related to hpPktBufMin. If hpPktBufMiss is greater than 0, hpPktBufMin must equal 0. Conversely, if hpPktBufMiss equals 0, then hpPktBufMin must be greater than 0.
.1.3.6.1.4.1.11.2.14.11.5.1.1.1.2.1.1.7,NETSWITCH-MIB::hpPktBufSize,INTEGER,read-only,,mandatory,,The size of the packet buffer in bytes.
.1.3.6.1.4.1.11.2.14.11.5.1.1.2,NETSWITCH-MIB::hpMem,,,,,,
.1.3.6.1.4.1.11.2.14.11.5.1.1.2.1,NETSWITCH-MIB::hpLocalMem,,,,,,
.1.3.6.1.4.1.11.2.14.11.5.1.1.2.1.1,NETSWITCH-MIB::hpLocalMemTable,,not-accessible,,mandatory,,A table that contains information on all the  local memory for each slot.
.1.3.6.1.4.1.11.2.14.11.5.1.1.2.1.1.1,NETSWITCH-MIB::hpLocalMemEntry,,not-accessible,hpLocalMemSlotIndex,mandatory,,Information about a slot in a chassis
.1.3.6.1.4.1.11.2.14.11.5.1.1.2.1.1.1.1,NETSWITCH-MIB::hpLocalMemSlotIndex,INTEGER,read-only,,mandatory,,The slot number within the box for which this  entry contains information.
.1.3.6.1.4.1.11.2.14.11.5.1.1.2.1.1.1.2,NETSWITCH-MIB::hpLocalMemSlabCnt,Counter32,read-only,,mandatory,,The current number of discretely managed memory areas. Each slab is further broken down into smaller contiguous areas called segments.
.1.3.6.1.4.1.11.2.14.11.5.1.1.2.1.1.1.3,NETSWITCH-MIB::hpLocalMemFreeSegCnt,Counter32,read-only,,mandatory,,The current number of free memory segments. A free memory segment is an unused contiguous memory block of greater than 16 bytes. Generally, an increase in the number of free memory segments indicates an increase in memory fragmentation.
.1.3.6.1.4.1.11.2.14.11.5.1.1.2.1.1.1.4,NETSWITCH-MIB::hpLocalMemAllocSegCnt,Counter32,read-only,,mandatory,,The number of currently allocated memory segments.
.1.3.6.1.4.1.11.2.14.11.5.1.1.2.1.1.1.5,NETSWITCH-MIB::hpLocalMemTotalBytes,INTEGER,read-only,,mandatory,,The number of currently installed bytes.
.1.3.6.1.4.1.11.2.14.11.5.1.1.2.1.1.1.6,NETSWITCH-MIB::hpLocalMemFreeBytes,INTEGER,read-only,,mandatory,,The number of available (unallocated) bytes.
.1.3.6.1.4.1.11.2.14.11.5.1.1.2.1.1.1.7,NETSWITCH-MIB::hpLocalMemAllocBytes,INTEGER,read-only,,mandatory,,The number of currently allocated bytes.
.1.3.6.1.4.1.11.2.14.11.5.1.1.2.2,NETSWITCH-MIB::hpGlobalMem,,,,,,
.1.3.6.1.4.1.11.2.14.11.5.1.1.2.2.1,NETSWITCH-MIB::hpGlobalMemTable,,not-accessible,,mandatory,,A table that contains information on all the  local memory for each slot.
.1.3.6.1.4.1.11.2.14.11.5.1.1.2.2.1.1,NETSWITCH-MIB::hpGlobalMemEntry,,not-accessible,hpGlobalMemSlotIndex,mandatory,,Information about a slot in a chassis
.1.3.6.1.4.1.11.2.14.11.5.1.1.2.2.1.1.1,NETSWITCH-MIB::hpGlobalMemSlotIndex,INTEGER,read-only,,mandatory,,The slot number within the box for which this  entry contains information.
.1.3.6.1.4.1.11.2.14.11.5.1.1.2.2.1.1.2,NETSWITCH-MIB::hpGlobalMemSlabCnt,Counter32,read-only,,mandatory,,The current number of discretely managed memory areas. Each slab is further broken down into smaller contiguous areas called segments.
.1.3.6.1.4.1.11.2.14.11.5.1.1.2.2.1.1.3,NETSWITCH-MIB::hpGlobalMemFreeSegCnt,Counter32,read-only,,mandatory,,The current number of free memory segments. A free memory segment is an unused contiguous memory block of greater than 16 bytes. Generally, an increase in the number of free memory segments indicates an increase in memory fragmentation.
.1.3.6.1.4.1.11.2.14.11.5.1.1.2.2.1.1.4,NETSWITCH-MIB::hpGlobalMemAllocSegCnt,Counter32,read-only,,mandatory,,The number of currently allocated memory segments.
.1.3.6.1.4.1.11.2.14.11.5.1.1.2.2.1.1.5,NETSWITCH-MIB::hpGlobalMemTotalBytes,INTEGER,read-only,,mandatory,,The number of currently installed bytes.
.1.3.6.1.4.1.11.2.14.11.5.1.1.2.2.1.1.6,NETSWITCH-MIB::hpGlobalMemFreeBytes,INTEGER,read-only,,mandatory,,The number of available (unallocated) bytes.
.1.3.6.1.4.1.11.2.14.11.5.1.1.2.2.1.1.7,NETSWITCH-MIB::hpGlobalMemAllocBytes,INTEGER,read-only,,mandatory,,The number of currently allocated bytes.
.1.3.6.1.4.1.11.2.14.11.5.1.1.3,NETSWITCH-MIB::hpSwitchOsVersion,OCTET,read-only,,mandatory,,Contains the operating code version number (also known as software or firmware). For example, a software version such as A.08.01 is described as follows: A the function set available in your router 08 the common release number 01 updates to the current common release
.1.3.6.1.4.1.11.2.14.11.5.1.1.4,NETSWITCH-MIB::hpSwitchRomVersion,OCTET,read-only,,mandatory,,Contains the ROM version number (such as A.08.01 is described as follows: A the function set available in your router 08 the common release number 01 updates to the current common release
.1.3.6.1.4.1.11.2.14.11.5.1.1.5,NETSWITCH-MIB::hpSwitchSmartCardType,INTEGER,read-only,,mandatory,none(1):fddi(2):atm(3):fddiAndATM(4):other(5),Return the type of Smart Cards in the system.  Some system may contains more than one types of smart cards, such as FDDI and ATM
.1.3.6.1.4.1.11.2.14.11.5.1.1.6,NETSWITCH-MIB::hpSwitchBaseMACAddress,OCTET,read-only,,mandatory,,Return the base MAC address of the switch. This is also the MAC address of the default vlan. 
.1.3.6.1.4.1.11.2.14.11.5.1.2,HP-ICF-OID::hpHwSystem,,,,,,
.1.3.6.1.4.1.11.2.14.11.5.1.2.2,NETSWITCH-DMA-MIB::hpDMAStats,,,,,,
.1.3.6.1.4.1.11.2.14.11.5.1.2.2.1,NETSWITCH-DMA-MIB::hpDMAReset,INTEGER,read-write,,mandatory,reset(1),It resets all DMA counters to 0 by providing 1
.1.3.6.1.4.1.11.2.14.11.5.1.2.2.2,NETSWITCH-DMA-MIB::hpDMAFrameRcvcnt,Counter32,read-only,,mandatory,,This object is a count of the number of frames that have been received by the switch. Only good CRC frames are included.
.1.3.6.1.4.1.11.2.14.11.5.1.2.2.3,NETSWITCH-DMA-MIB::hpDMAOctetsRcvcnt,Counter32,read-only,,mandatory,,This object is a count of the number of octets that have been received by the switch. This counter is incremented by the size of each frame received
.1.3.6.1.4.1.11.2.14.11.5.1.2.2.4,NETSWITCH-DMA-MIB::hpDMAPrevRcvFrames,Counter32,read-only,,mandatory,,This object is a copy of hpDMARcvFrames sampled 
.1.3.6.1.4.1.11.2.14.11.5.1.2.2.5,NETSWITCH-DMA-MIB::hpDMAFrameRcvPerSec,Counter32,read-only,,mandatory,,This object is a count of the number of frames is updated every second.
.1.3.6.1.4.1.11.2.14.11.5.1.2.2.6,NETSWITCH-DMA-MIB::hpDMAPeakRcvFrames,Counter32,read-only,,mandatory,,This object is a count of the highest  by the switch.
.1.3.6.1.4.1.11.2.14.11.5.1.2.2.7,NETSWITCH-DMA-MIB::hpDMAPrevRcvOctets,Counter32,read-only,,mandatory,,This object is a copy of hpDMAPrevRcvFrames sampled 
.1.3.6.1.4.1.11.2.14.11.5.1.2.2.8,NETSWITCH-DMA-MIB::hpDMAOctetsRcvPerSec,Counter32,read-only,,mandatory,,This object is a count of the number of octets is updated every second.
.1.3.6.1.4.1.11.2.14.11.5.1.2.2.9,NETSWITCH-DMA-MIB::hpDMAPeakRcvOctets,Counter32,read-only,,mandatory,,This object is a count of the highest 
.1.3.6.1.4.1.11.2.14.11.5.1.2.2.10,NETSWITCH-DMA-MIB::hpDMAFrameXmtcnt,Counter32,read-only,,mandatory,,This counter is incremented by one for each frame successfully transmitted from the switch.
.1.3.6.1.4.1.11.2.14.11.5.1.2.2.11,NETSWITCH-DMA-MIB::hpDMAOctetsXmtcnt,Counter32,read-only,,mandatory,,This object is a count of the number of octets that
.1.3.6.1.4.1.11.2.14.11.5.1.2.2.12,NETSWITCH-DMA-MIB::hpDMAPrevXmtFrames,Counter32,read-only,,mandatory,,This object is a copy of hpDMAXmtFrames sampled 
.1.3.6.1.4.1.11.2.14.11.5.1.2.2.13,NETSWITCH-DMA-MIB::hpDMAFrameXmtPerSec,Counter32,read-only,,mandatory,,This object is a count of the number of frames is updated every second.
.1.3.6.1.4.1.11.2.14.11.5.1.2.2.14,NETSWITCH-DMA-MIB::hpDMAPeakXmtFrames,Counter32,read-only,,mandatory,,This object is a count of the highest 
.1.3.6.1.4.1.11.2.14.11.5.1.2.2.15,NETSWITCH-DMA-MIB::hpDMAPrevXmtOctets,Counter32,read-only,,mandatory,,This object is a copy of hpDMAPrevXmtFrames sampled 
.1.3.6.1.4.1.11.2.14.11.5.1.2.2.16,NETSWITCH-DMA-MIB::hpDMAOctetsXmtPerSec,Counter32,read-only,,mandatory,,This object is a count of the number of octets is updated every second.
.1.3.6.1.4.1.11.2.14.11.5.1.2.2.17,NETSWITCH-DMA-MIB::hpDMAPeakXmtOctets,Counter32,read-only,,mandatory,,This object is a count of the highest 
.1.3.6.1.4.1.11.2.14.11.5.1.2.2.18,NETSWITCH-DMA-MIB::hpDMAFrameClippedcnt,Counter32,read-only,,mandatory,,This object is a count of number of outbound frames 
.1.3.6.1.4.1.11.2.14.11.5.1.2.2.19,NETSWITCH-DMA-MIB::hpDMAFrameClippedOccurance,Counter32,read-only,,mandatory,,This object is a count of the number of times the
.1.3.6.1.4.1.11.2.14.11.5.1.2.2.20,NETSWITCH-DMA-MIB::hpDMAMissBufCnt,Counter32,read-only,,mandatory,,This counter is incremented when buffer allocation
.1.3.6.1.4.1.11.2.14.11.5.1.2.3,NETSWITCH-DRIVERS-MIB::hpDriverStats,,,,,,
.1.3.6.1.4.1.11.2.14.11.5.1.2.3.1,NETSWITCH-DRIVERS-MIB::hpDriverStatsTable,,not-accessible,,mandatory,,A list of driver entries. 
.1.3.6.1.4.1.11.2.14.11.5.1.2.3.1.1,NETSWITCH-DRIVERS-MIB::hpDriverStatsEntry,,not-accessible,hpDriverStatsIndex,mandatory,,A driver entry containing information common to  all drivers.
.1.3.6.1.4.1.11.2.14.11.5.1.2.3.1.1.1,NETSWITCH-DRIVERS-MIB::hpDriverStatsIndex,INTEGER,read-only,,mandatory,,A unique value for each driver. The value for each  driver must remain constant at least from one re-  initialization of the entity's network management  system to the next re-initialization.
.1.3.6.1.4.1.11.2.14.11.5.1.2.3.1.1.2,NETSWITCH-DRIVERS-MIB::hpDriverStatsType,OCTET,read-only,,mandatory,,Type of driver, FDDI, ATM, SPITFIRE, etc. 
.1.3.6.1.4.1.11.2.14.11.5.1.2.3.1.1.3,NETSWITCH-DRIVERS-MIB::hpDriverStatsOctetsRxOk,INTEGER,read-only,,mandatory,,The number of octets received by the driver including the FCS but not including framing bits.
.1.3.6.1.4.1.11.2.14.11.5.1.2.3.1.1.4,NETSWITCH-DRIVERS-MIB::hpDriverStatsFrameRxOk,INTEGER,read-only,,mandatory,,The number of frames received by the driver.
.1.3.6.1.4.1.11.2.14.11.5.1.2.3.1.1.5,NETSWITCH-DRIVERS-MIB::hpDriverStatsTotalRxError,INTEGER,read-only,,mandatory,,The total number of receive errors.
.1.3.6.1.4.1.11.2.14.11.5.1.2.3.1.1.6,NETSWITCH-DRIVERS-MIB::hpDriverStatsOctetTxOk,INTEGER,read-only,,mandatory,,The number of octets transmitted by the driver including the FCS but not including framing bits.
.1.3.6.1.4.1.11.2.14.11.5.1.2.3.1.1.7,NETSWITCH-DRIVERS-MIB::hpDriverStatsFrameTxOk,INTEGER,read-only,,mandatory,,The number of frames transmitted by the driver.
.1.3.6.1.4.1.11.2.14.11.5.1.2.3.1.1.8,NETSWITCH-DRIVERS-MIB::hpDriverStatsTotalTxError,INTEGER,read-only,,mandatory,,The total number of transmit errors.
.1.3.6.1.4.1.11.2.14.11.5.1.2.3.1.1.9,NETSWITCH-DRIVERS-MIB::hpDriverStatsOctetsRxPerSec,INTEGER,read-only,,mandatory,,The number of octets received by the driver during the previous one second sample period.
.1.3.6.1.4.1.11.2.14.11.5.1.2.3.1.1.10,NETSWITCH-DRIVERS-MIB::hpDriverStatsPeakOctetsRx,INTEGER,read-only,,mandatory,,The highest number of octets received by the driver during one second sample periods.
.1.3.6.1.4.1.11.2.14.11.5.1.2.3.1.1.11,NETSWITCH-DRIVERS-MIB::hpDriverStatsFramesRxPerSec,INTEGER,read-only,,mandatory,,The number of frames received by the driver during the previous one second sample period.
.1.3.6.1.4.1.11.2.14.11.5.1.2.3.1.1.12,NETSWITCH-DRIVERS-MIB::hpDriverStatsPeakFramesRx,INTEGER,read-only,,mandatory,,The highest number of frames received by the driver during one second sample periods.
.1.3.6.1.4.1.11.2.14.11.5.1.2.3.1.1.13,NETSWITCH-DRIVERS-MIB::hpDriverStatsOctetsTxPerSec,INTEGER,read-only,,mandatory,,The number of octets transmitted by the driver during the previous one second sample period.
.1.3.6.1.4.1.11.2.14.11.5.1.2.3.1.1.14,NETSWITCH-DRIVERS-MIB::hpDriverStatsPeakOctetsTx,INTEGER,read-only,,mandatory,,The highest number of octets transmitted by the driver during one second sample periods. 
.1.3.6.1.4.1.11.2.14.11.5.1.2.3.1.1.15,NETSWITCH-DRIVERS-MIB::hpDriverStatsFramesTxPerSec,INTEGER,read-only,,mandatory,,The number of frames transmitted by the driver during the previous one second sample period 
.1.3.6.1.4.1.11.2.14.11.5.1.2.3.1.1.16,NETSWITCH-DRIVERS-MIB::hpDriverStatsPeakFramesTx,INTEGER,read-only,,mandatory,,The highest number of frames transmitted by the driver during one second sample periods. 
.1.3.6.1.4.1.11.2.14.11.5.1.2.3.2,NETSWITCH-DRIVERS-MIB::hpFddiDriverStatsTable,,not-accessible,,mandatory,,A list of FDDI driver entries. 
.1.3.6.1.4.1.11.2.14.11.5.1.2.3.2.1,NETSWITCH-DRIVERS-MIB::hpFddiDriverStatsEntry,,not-accessible,hpFddiDriverStatsIndex,mandatory,,A FDDI driver entry containing information common to a  given driver.
.1.3.6.1.4.1.11.2.14.11.5.1.2.3.2.1.1,NETSWITCH-DRIVERS-MIB::hpFddiDriverStatsIndex,INTEGER,read-only,,mandatory,,A unique value for each driver. The value for each  driver must remain constant at least from one re-  initialization of the entity's network management  system to the next re-initialization.
.1.3.6.1.4.1.11.2.14.11.5.1.2.3.2.1.2,NETSWITCH-DRIVERS-MIB::hpFddiDriverStatsSMTOctetsRxOk,INTEGER,read-only,,mandatory,,The number of SMT octets received by the driver including the FCS but not including framing bits.
.1.3.6.1.4.1.11.2.14.11.5.1.2.3.2.1.3,NETSWITCH-DRIVERS-MIB::hpFddiDriverStatsSMTFrameRxOk,INTEGER,read-only,,mandatory,,The number of SMT frames received by the driver.
.1.3.6.1.4.1.11.2.14.11.5.1.2.3.2.1.4,NETSWITCH-DRIVERS-MIB::hpFddiDriverStatsSMTOctetsTxOk,INTEGER,read-only,,mandatory,,The number of SMT octets transmitted by the driver including the FCS but not including framing bits.
.1.3.6.1.4.1.11.2.14.11.5.1.2.3.2.1.5,NETSWITCH-DRIVERS-MIB::hpFddiDriverStatsSMTFrameTxOk,INTEGER,read-only,,mandatory,,The number of SMT frames transmitted by the driver.
.1.3.6.1.4.1.11.2.14.11.5.1.2.3.2.1.6,NETSWITCH-DRIVERS-MIB::hpFddiDriverStatsErrRxCRC,INTEGER,read-only,,mandatory,,The number of received frames containing a CRC error detected by the FDDI network interface chip.
.1.3.6.1.4.1.11.2.14.11.5.1.2.3.2.1.7,NETSWITCH-DRIVERS-MIB::hpFddiDriverStatsErrRxOverrun,INTEGER,read-only,,mandatory,,The number of received frames that are invalid due to overrun conditions in the FSI of the MC68840 FDDI network interface chip.
.1.3.6.1.4.1.11.2.14.11.5.1.2.3.2.1.8,NETSWITCH-DRIVERS-MIB::hpFddiDriverStatsErrRxParity,INTEGER,read-only,,mandatory,,The number of received frames containing a parity error detected by the FDDI network interface chip.
.1.3.6.1.4.1.11.2.14.11.5.1.2.3.2.1.9,NETSWITCH-DRIVERS-MIB::hpFddiDriverStatsErrRxMACStatus,INTEGER,read-only,,mandatory,,The number of received frames generating MAC status errors in the MC68840 FDDI network interface chip.
.1.3.6.1.4.1.11.2.14.11.5.1.2.3.2.1.10,NETSWITCH-DRIVERS-MIB::hpFddiDriverStatsErrTxAbort,INTEGER,read-only,,mandatory,,The number of transmit frames that were aborted by the MC68840 FDDI network interface chip.
.1.3.6.1.4.1.11.2.14.11.5.1.2.3.2.1.11,NETSWITCH-DRIVERS-MIB::hpFddiDriverStatsErrTxUnderrun,INTEGER,read-only,,mandatory,,The number of transmit frames that were aborted due to underrun errors in the MC68840 FDDI network interface chip.
.1.3.6.1.4.1.11.2.14.11.5.1.2.3.2.1.12,NETSWITCH-DRIVERS-MIB::hpFddiDriverStatsErrTxParity,INTEGER,read-only,,mandatory,,The number of transmit frames that were aborted due to parity errors in the MC68840 FDDI network interface chip.
.1.3.6.1.4.1.11.2.14.11.5.1.2.3.2.1.13,NETSWITCH-DRIVERS-MIB::hpFddiDriverStatsErrGsrLlcTxRer,INTEGER,read-only,,mandatory,,The number of LLC transmit ring errors detected by the MC68840 FDDI network interface chip.
.1.3.6.1.4.1.11.2.14.11.5.1.2.3.2.1.14,NETSWITCH-DRIVERS-MIB::hpFddiDriverStatsErrGsrLlcRxRer,INTEGER,read-only,,mandatory,,The number of LLC receive ring errors detected by the MC68840 FDDI network interface chip.
.1.3.6.1.4.1.11.2.14.11.5.1.2.3.2.1.15,NETSWITCH-DRIVERS-MIB::hpFddiDriverStatsErrGsrSMTTxRer,INTEGER,read-only,,mandatory,,The number of SMT transmit ring errors detected by the MC68840 FDDI network interface chip.
.1.3.6.1.4.1.11.2.14.11.5.1.2.3.2.1.16,NETSWITCH-DRIVERS-MIB::hpFddiDriverStatsErrGsrSMTRxRer,INTEGER,read-only,,mandatory,,The number of SMT receive ring errors detected by the MC68840 FDDI network interface chip.
.1.3.6.1.4.1.11.2.14.11.5.1.2.3.2.1.17,NETSWITCH-DRIVERS-MIB::hpFddiDriverStatsErrGsrPortOp,INTEGER,read-only,,mandatory,,The number of port operation errors detected by the FSI of the MC68840 FDDI network interface chip.
.1.3.6.1.4.1.11.2.14.11.5.1.2.3.2.1.18,NETSWITCH-DRIVERS-MIB::hpFddiDriverStatsErrGsrLlcRxRov,INTEGER,read-only,,mandatory,,The number of LLC receive overrun condition detected by the FSI of the MC68840 FDDI network interface chip.
.1.3.6.1.4.1.11.2.14.11.5.1.2.3.2.1.19,NETSWITCH-DRIVERS-MIB::hpFddiDriverStatsErrGsrSMTRxRov,INTEGER,read-only,,mandatory,,The number of SMT receive overrun condition detected by the FSI of the MC68840 FDDI network interface chip.
.1.3.6.1.4.1.11.2.14.11.5.1.2.3.2.1.20,NETSWITCH-DRIVERS-MIB::hpFddiDriverStatsErrGsrInternalOp,INTEGER,read-only,,mandatory,,The number of internal operation errors detected by the FSI of the MC68840 FDDI network interface chip.
.1.3.6.1.4.1.11.2.14.11.5.1.2.3.2.1.21,NETSWITCH-DRIVERS-MIB::hpFddiDriverStatsIoeMov,INTEGER,read-only,,mandatory,,The number of memory overrun conditions that the FSI has detected in MC68840 FDDI network interface chip. The internal operation error count will also be incremented under this condition.
.1.3.6.1.4.1.11.2.14.11.5.1.2.3.2.1.22,NETSWITCH-DRIVERS-MIB::hpFddiDriverStatsErrGsrHost,INTEGER,read-only,,mandatory,,The number of host errors detected by the FSI of the MC68840 FDDI network interface chip.
.1.3.6.1.4.1.11.2.14.11.5.1.2.3.2.1.23,NETSWITCH-DRIVERS-MIB::hpFddiDriverStatsTxCongestion,INTEGER,read-only,,mandatory,,The number of transmit packets dropped due to insufficient space on the FDDI driver transmit ring.
.1.3.6.1.4.1.11.2.14.11.5.1.2.3.2.1.24,NETSWITCH-DRIVERS-MIB::hpFddiDriverStatsMissedCmd,INTEGER,read-only,,mandatory,,The number of FSI commands that did not execute properly in the MC68840 FDDI network interface chip.
.1.3.6.1.4.1.11.2.14.11.5.1.2.3.2.1.25,NETSWITCH-DRIVERS-MIB::hpFddiDriverStatsMissedCRF,INTEGER,read-only,,mandatory,,The number of FSI commands that could not be issued because of an unavailable command register in the MC68840 FDDI network interface chip.
.1.3.6.1.4.1.11.2.14.11.5.1.3,HP-ICF-OID::hpVLAN,,,,,,
.1.3.6.1.4.1.11.2.14.11.5.1.3.1,HP-VLAN::hpVlanLevelOne,,,,,,This MIB module describes management objects used to model virtual LANs (VLANs).
.1.3.6.1.4.1.11.2.14.11.5.1.3.1.1,HP-VLAN::hpVlanObjects,,,,,,
.1.3.6.1.4.1.11.2.14.11.5.1.3.1.1.1,HP-VLAN::hpVlanNumber,Integer32,read-only,,deprecated,,The number of currently defined VLANs in the device. Though VLANs should be created using contiguous VLAN IDs, this is not mandatory. Gaps in the VLAN ID sequence may also result from the deletion of existing VLANs. Therefore, this value represents the total number of VLANs in the device and should not be used to indicate the highest VLAN ID value currently in use.
.1.3.6.1.4.1.11.2.14.11.5.1.3.1.1.4,HP-VLAN::hpVlanIdentTable,,not-accessible,,deprecated,,A table describing the various VLANs that  are currently defined for this device.
.1.3.6.1.4.1.11.2.14.11.5.1.3.1.1.4.1,HP-VLAN::hpVlanIdentEntry,,not-accessible,hpVlanIdentIndex,deprecated,,The row in the hpVlanIdentTable containing  the general VLAN information.
.1.3.6.1.4.1.11.2.14.11.5.1.3.1.1.4.1.1,HP-VLAN::hpVlanIdentIndex,Integer32,not-accessible,,deprecated,,The VLAN ID which uniquely identifies a row  in this table.
.1.3.6.1.4.1.11.2.14.11.5.1.3.1.1.4.1.2,HP-VLAN::hpVlanIdentName,OCTET,read-create,,deprecated,,The user defined textual name that is associated with this VLAN.
.1.3.6.1.4.1.11.2.14.11.5.1.3.1.1.4.1.3,HP-VLAN::hpVlanIdentMode,INTEGER,read-only,,deprecated,port(1):mac(2),The mode of this VLAN. A VLAN can be either port-based or MAC address-based. A port-based VLAN supports a multiple addresses per VLAN  port. A MAC address-based VLAN supports multiple MAC addresses per port such that VLAN address tables must be consulted to determine the number of VLAN clients.
.1.3.6.1.4.1.11.2.14.11.5.1.3.1.1.4.1.4,HP-VLAN::hpVlanIdentStatus,INTEGER,read-create,,deprecated,active(1):notInService(2):notReady(3):createAndGo(4):createAndWait(5):destroy(6),The status of a VLAN information entry.
.1.3.6.1.4.1.11.2.14.11.5.1.3.1.1.4.1.5,HP-VLAN::hpVlanDot1QID,Integer32,read-create,,deprecated,,The VLAN tag ID. 802.1Q
.1.3.6.1.4.1.11.2.14.11.5.1.3.1.1.4.1.6,HP-VLAN::hpVlanIdentState,INTEGER,read-only,,deprecated,up(1):down(2),Current state of the VLAN. If one port in the VLAN is up, then that VLAN is up, otherwise it is down.
.1.3.6.1.4.1.11.2.14.11.5.1.3.1.1.4.1.7,HP-VLAN::hpVlanIdentType,INTEGER,read-create,,deprecated,static(1):dynamic(2),Type of VLAN: static - VLAN is user-configured; configuration information is retained in configuration file and thus such VLANs are available across reboots. dynamic - VLAN is managed by GVRP; configuration information is NOT retained in configuration file and thus such VLANs are not available across reboots. They may be relearnt after a reboot via GVRP activity
.1.3.6.1.4.1.11.2.14.11.5.1.3.1.1.5,HP-VLAN::hpVlanMemberTable,,not-accessible,,deprecated,,A table describing the members of the various  VLANs that are currently defined for this device. Interfaces can be associated with a pre-defined VLAN (i.e., VLANs can be created by grouping existing interfaces) by adding rows to this table. Likewise, deleting rows from this table removes the specified interface from the VLAN.  Note that certain entries in this table will automatically be created when a VLAN is created, such as the entry associating a VLAN with its propVirtual interface to the management and/or forwarding entity on the device. These entries are read-only and can not be manipulated via the MIB.
.1.3.6.1.4.1.11.2.14.11.5.1.3.1.1.5.1,HP-VLAN::hpVlanMemberEntry,,not-accessible,hpVlanMemberIfIndex,deprecated,,The row in the hpVlanMemberTable containing the  VLAN ID to Interface Group ifIndex mappings.
.1.3.6.1.4.1.11.2.14.11.5.1.3.1.1.5.1.1,HP-VLAN::hpVlanMemberIfIndex,Integer32,not-accessible,,deprecated,,The ifIndex value which uniquely identifies a row in the Interfaces Table. The corresponding row in the Interfaces Table must exist prior  to the index being used in this table.
.1.3.6.1.4.1.11.2.14.11.5.1.3.1.1.5.1.2,HP-VLAN::hpVlanMemberIndex,Integer32,read-create,,deprecated,,The VLAN ID identifies the VLAN the interface is in. The corresponding row in the VLAN Ident Table must exist prior to the index being used in this table.
.1.3.6.1.4.1.11.2.14.11.5.1.3.1.1.6,HP-VLAN::hpVlanAddrTable,,not-accessible,,deprecated,,A table describing the MAC addresses that are currently associated with a specific VLAN. Entries are added to and deleted from this read-only table automatically as they are learned from the network.
.1.3.6.1.4.1.11.2.14.11.5.1.3.1.1.6.1,HP-VLAN::hpVlanAddrEntry,,not-accessible,hpVlanAddrIndex,deprecated,,The row in the hpVlanAddrTable containing  the VLAN ID to MAC address mappings.
.1.3.6.1.4.1.11.2.14.11.5.1.3.1.1.6.1.1,HP-VLAN::hpVlanAddrIndex,Integer32,not-accessible,,deprecated,,The VLAN ID which uniquely identifies a row  in the VLAN Ident Table. The corresponding  row in the VLAN Ident Table must exist prior  to the index being present in this table.
.1.3.6.1.4.1.11.2.14.11.5.1.3.1.1.6.1.2,HP-VLAN::hpVlanAddrPhysAddress,OCTET,read-only,,deprecated,,The MAC address of a node that is associated  with a specific VLAN as identified by the object hpVlanAddrIndex.
.1.3.6.1.4.1.11.2.14.11.5.1.3.1.1.7,HP-VLAN::hpVlanIdentConfigStatus,INTEGER,read-only,,deprecated,active(1):notInService(2):notReady(3),The status of a VLAN information table. If one or more variables in this group were reconfigurated since last  reboot and required reboot to take effect, the value of this variable will be set to notInService.
.1.3.6.1.4.1.11.2.14.11.5.1.3.1.1.8,HP-VLAN::hpVlanMemberTable2,,not-accessible,,deprecated,,A table describing the VLANs on each particular port along with tagging information.
.1.3.6.1.4.1.11.2.14.11.5.1.3.1.1.8.1,HP-VLAN::hpVlanMemberEntry2,,not-accessible,hpVlanIdentIndex:hpVlanMemberIfIndex,deprecated,,The row in the hpVlanMemberTable2 containing the VLAN ID to interface group ifIndex mappings as well the VLAN tagging information.
.1.3.6.1.4.1.11.2.14.11.5.1.3.1.1.8.1.1,HP-VLAN::hpVlanMemberTagged2,INTEGER,read-write,,deprecated,tagged(1):untagged(2):no(3):auto(4),Identifies whether the particular VLan on this port is tagged or not. 'no' denotes not a member of that vlan. 'auto' denotes that GVRP will dynamically determine the membership of this port.
.1.3.6.1.4.1.11.2.14.11.5.1.3.1.2,HP-VLAN::hpVlanTraps,,,,,,
.1.3.6.1.4.1.11.2.14.11.5.1.3.1.3,HP-VLAN::hpVlanConformance,,,,,,
.1.3.6.1.4.1.11.2.14.11.5.1.3.1.3.1,HP-VLAN::hpVlanGroups,,,,,,
.1.3.6.1.4.1.11.2.14.11.5.1.3.1.3.1.1,HP-VLAN::hpVlanGeneralGroup,,,,,,A collection of objects that provide general information about a configured VLAN. The organization of this group is such that it is assumed that all devices supporting VLANs associate an RFC 1573 interface with a VLAN even if only to allow default node-to-VLAN assignment.
.1.3.6.1.4.1.11.2.14.11.5.1.3.1.3.1.2,HP-VLAN::hpVlanAddressGroup,,,,,,A collection of objects that contain VLAN to MAC address mapping data.
.1.3.6.1.4.1.11.2.14.11.5.1.3.1.3.1.3,HP-VLAN::hpVlanMemberGroup,,,,,,A collection of objects for providing port to VLAN mapping data.
.1.3.6.1.4.1.11.2.14.11.5.1.3.1.3.1.4,HP-VLAN::hpVlanTaggingGroup,,,,,,A collection of objects for managing tagged VLANs.
.1.3.6.1.4.1.11.2.14.11.5.1.3.1.3.2,HP-VLAN::hpVlanCompliances,,,,,,
.1.3.6.1.4.1.11.2.14.11.5.1.3.1.3.2.1,HP-VLAN::hpVlanCompliance,,,,,,The compliance statement for HP devices supporting the HP VLAN MIB.
.1.3.6.1.4.1.11.2.14.11.5.1.3.1.3.2.2,HP-VLAN::hpVlanCompliance1,,,,,,The compliance statement for HP devices supporting the HP VLAN MIB.
.1.3.6.1.4.1.11.2.14.11.5.1.7,HP-ICF-OID::hpConfig,,,,,,
.1.3.6.1.4.1.11.2.14.11.5.1.7.1,CONFIG-MIB::hpSwitchConfig,,,,,,
.1.3.6.1.4.1.11.2.14.11.5.1.7.1.0,CONFIG-MIB::hpSwitchTraps,,,,,,
.1.3.6.1.4.1.11.2.14.11.5.1.7.1.0.0,CONFIG-MIB::hpSwitchTraps#,,,,,,
.1.3.6.1.4.1.11.2.14.11.5.1.7.1.0.0.1,CONFIG-MIB::hpSwitchStpErrantBpduReceived,,,,,,This trap indicates that unexpected (errant) STP BPDU  has been received on a port (e.g. on a port that is  connected to non-STP device). This notification trap  is controlled by the state of 'hpSwitchStpTrapCntl'  object. Implementation of this trap is optional.
.1.3.6.1.4.1.11.2.14.11.5.1.7.1.0.1,CONFIG-MIB::hpSwitchTrapsObjects,,,,,,
.1.3.6.1.4.1.11.2.14.11.5.1.7.1.0.1.1,CONFIG-MIB::hpSwitchStpErrantBpduDetector,INTEGER,accessible-for-notify,,optional,bpduFilter(1):bpduProtection(2):pvstFilter(3):pvstProtection(4),The identifier of the feature generating Errant  BPDU trap.
.1.3.6.1.4.1.11.2.14.11.5.1.7.1.0.1.2,CONFIG-MIB::hpSwitchStpErrantBpduSrcMac,OCTET,accessible-for-notify,,optional,,The source MAC address of the port sending Errant STP BPDU.
.1.3.6.1.4.1.11.2.14.11.5.1.7.1.1,CONFIG-MIB::hpSwitchSystemConfig,,,,,,
.1.3.6.1.4.1.11.2.14.11.5.1.7.1.1.1,CONFIG-MIB::hpSwitchAutoReboot,INTEGER,read-write,,mandatory,yes(1):no(2):useHw(3),When set to yes(1), the switch will automatically reboot on crash. When set to no(2), the switch will halt on crash and wait until power cycled. When set to useHw(3), physical jumper is used to determine the behavior of the switch. The default value is useHw(3).
.1.3.6.1.4.1.11.2.14.11.5.1.7.1.1.2,CONFIG-MIB::hpSwitchTimeZone,INTEGER,read-write,,mandatory,,The number of minutes to the east of Greenwich Mean Time(GMT). For a location west of GMT, use a negative integer.
.1.3.6.1.4.1.11.2.14.11.5.1.7.1.1.3,CONFIG-MIB::hpSwitchDaylightTimeRule,INTEGER,read-write,,mandatory,none(1):alaska(2):canadaAndContinentalUS(3):middleEuropeAndPortugal(4):southernHemisphere(5):westernEurop(6):userDefined(7),The daylight savings time rule for use by the Internet's RFC 868 Time protocol.
.1.3.6.1.4.1.11.2.14.11.5.1.7.1.1.4,CONFIG-MIB::hpSwitchDaylightBeginningMonth,INTEGER,read-write,,mandatory,,The month that daylight saving time starts if DaylightTimeRule is set to userDefined.
.1.3.6.1.4.1.11.2.14.11.5.1.7.1.1.5,CONFIG-MIB::hpSwitchDaylightBeginningDay,INTEGER,read-write,,mandatory,,The day of the month that daylight saving time starts if DaylightTimeRule is set to userDefined.
.1.3.6.1.4.1.11.2.14.11.5.1.7.1.1.6,CONFIG-MIB::hpSwitchDaylightEndingMonth,INTEGER,read-write,,mandatory,,The month that daylight saving time ends if DaylightTimeRule is set to userDefined.
.1.3.6.1.4.1.11.2.14.11.5.1.7.1.1.7,CONFIG-MIB::hpSwitchDaylightEndingDay,INTEGER,read-write,,mandatory,,The day of the month that daylight saving time emds if DaylightTimeRule is set to userDefined.
.1.3.6.1.4.1.11.2.14.11.5.1.7.1.1.8,CONFIG-MIB::hpSwitchSystemConfigStatus,INTEGER,read-only,,mandatory,active(1):notInService(2):notReady(3),The configuration status of this group of objects. If one or more variables in this group were reconfigured since last reboot and required reboot to take effect, the value of this variable will be set to notInService.
.1.3.6.1.4.1.11.2.14.11.5.1.7.1.1.9,CONFIG-MIB::hpSwitchSystemPortLEDMode,INTEGER,read-write,,mandatory,link-activity(1):link-only(2),The mode of the port LED can be either link/activity (link for 3 seconds then activity thereafter) or link-only.
.1.3.6.1.4.1.11.2.14.11.5.1.7.1.1.10,CONFIG-MIB::hpSwitchControlUnknownIPMulticast,INTEGER,read-write,,mandatory,enable(1):disable(2),When enabled along with IGMP, any IP Multicast packets that are not already controlled by IGMP will be restricted to ports that have detected a multicast router or ports configured to always forward IP multicast. When set to disabled or when IGMP is disabled, the unknown IP Multicast packets will be flooded out all ports in the VLAN
.1.3.6.1.4.1.11.2.14.11.5.1.7.1.1.11,CONFIG-MIB::hpSwitchIgmpDelayedGroupFlushTimer,INTEGER,read-write,,mandatory,,This feature is disabled by default, which is indicated by a timer value of 0 seconds. When IGMP is enabled and the value of the Delayed Group Flush Timer is not zero, traffic filters for any previously-joined IGMP groups which no longer have active members will persist for the number of seconds indicated by the timer. This has the effect of dropping any additional unjoined traffic for an empty group until the Delayed Group Flush Timer expires, at which time the traffic filter is then removed.
.1.3.6.1.4.1.11.2.14.11.5.1.7.1.1.12,CONFIG-MIB::hpSwitchMaxFrameSize,INTEGER,read-write,,mandatory,,This is the value of the global jumbos max-frame-size supported by the switch. The default value for this is set to 9216, in order to make it compatible with previous versions of software. This configuration does not take a reboot to take effect.
.1.3.6.1.4.1.11.2.14.11.5.1.7.1.1.13,CONFIG-MIB::hpSwitchIpMTU,INTEGER,read-write,,mandatory,,This is the value of the global jumbos IP MTU or L3 MTU supported by the switch. The default value for this is set to 9198, in order to make it compatible with previous versions of software. This configuration does not take a reboot to take effect.
.1.3.6.1.4.1.11.2.14.11.5.1.7.1.1.14,CONFIG-MIB::hpSwitchAllowV1Modules,INTEGER,read-write,,mandatory,enable(1):disable(2),This object enables or disables V1 module compatibility. When set to 'enable', V1 modules are enabled and V2 modules operate in V1-compatibility mode. When set to 'disable', V1 modules are disabled and V2 modules have full functionality. Changing the value of this object to 'enable' erases the current configuration of the device and reboots it.
.1.3.6.1.4.1.11.2.14.11.5.1.7.1.1.15,CONFIG-MIB::hpSwitchAllowV2Modules,INTEGER,read-write,,mandatory,enable(1):disable(2):erase(3),This object enables or disables V2 interface module support. When enabled, the ports of V2 modules operate normally and  any V3 modules in the system operate in V2-compatibility  mode. When disabled, V3 modules have full functionality and  any V2 modules in the system are completely disabled.  Changing the value of this object results in an immediate  reboot of the system to apply the new mode. The special value 'erase' enables V2 module support such as 'enable', but also erases the switch configuration. It can  be used to clear all configuration settings when changing the mode from 'disable' to 'enable'. Normally, V2 module support cannot be enabled if there are any configuration  settings that are specific to V3 modules. This object returns a value of 'enable' after being set to 'erase' and reboots the device.
.1.3.6.1.4.1.11.2.14.11.5.1.7.1.1.16,CONFIG-MIB::hpicfPrivateVlanPromiscuousPorts,OCTET,read-write,,optional,,This object refers to the list of Promiscuous ports. By default all the ports on the switch are promiscuous ports. The promiscuous characteristics will be applied when port becomes a member of private primary VLAN.
.1.3.6.1.4.1.11.2.14.11.5.1.7.1.1.17,CONFIG-MIB::hpSwitchPreviewMode,INTEGER,read-write,,mandatory,enable(1):disable(2),This object enables or disables preview mode support. When set to 'enable', preview mdoe is enabled and  the user can configure the features available in the preview mode. When set to 'disable', preview mode is disabled and the user cannot configure any feature available in preview mode. Changing the value of this object from 'enable' to 'disable' reboots the device. The default value is disable.
.1.3.6.1.4.1.11.2.14.11.5.1.7.1.2,CONFIG-MIB::hpSwitchConsoleConfig,,,,,,
.1.3.6.1.4.1.11.2.14.11.5.1.7.1.2.1,CONFIG-MIB::hpSwitchTelnetAdminStatus,INTEGER,read-write,,obsolete,enable(1):disable(2),The status of the console telnet operation.
.1.3.6.1.4.1.11.2.14.11.5.1.7.1.2.2,CONFIG-MIB::hpSwitchTerminalType,INTEGER,read-write,,mandatory,vt100(2):ansi(4),Terminal type of the console device.
.1.3.6.1.4.1.11.2.14.11.5.1.7.1.2.3,CONFIG-MIB::hpSwitchConsoleRefRate,INTEGER,read-write,,mandatory,refRate1(1):refRate3(3):refRate5(5):refRate10(10):refRate20(20):refRate30(30):refRate45(45):refRate(60),The rate, in second per cycle, at which the display of various switch measurements.
.1.3.6.1.4.1.11.2.14.11.5.1.7.1.2.4,CONFIG-MIB::hpSwitchDisplayedEvent,INTEGER,read-write,,mandatory,none(1):major(2):notInfo(3):all(4):debug(5),The type of event messages to display on the console.
.1.3.6.1.4.1.11.2.14.11.5.1.7.1.2.5,CONFIG-MIB::hpSwitchConsoleConfigStatus,INTEGER,read-only,,mandatory,active(1):notInService(2):notReady(3),The configuration status of this group of objects. If one or more variables in this group were reconfigured since last reboot and required reboot to take effect, the value of this variable will be set to notInService.
.1.3.6.1.4.1.11.2.14.11.5.1.7.1.2.6,CONFIG-MIB::hpSwitchConsoleConfigLogoutPrompt,INTEGER,read-write,,mandatory,true(1):false(2),When this object is set to true (1), console/telnet/SSH logout confirmation prompt will be shown. This is the default behavior. When this object is set to false (2), logout confirmation prompt will not be shown.
.1.3.6.1.4.1.11.2.14.11.5.1.7.1.2.7,CONFIG-MIB::hpSwitchUsbConsoleAdminStatus,INTEGER,read-write,,optional,enable(1):disable(2),The status of the USB console port.
.1.3.6.1.4.1.11.2.14.11.5.1.7.1.2.8,CONFIG-MIB::hpSwitchSessionGlobalIdleTimeout,INTEGER,read-write,,mandatory,,The number of seconds to wait after no character was input to log out of a session. Valid values are 0 (no timeout) through 7200 (two hours).
.1.3.6.1.4.1.11.2.14.11.5.1.7.1.2.9,CONFIG-MIB::hpSwitchSessionConsoleIdleTimeout,INTEGER,read-write,,mandatory,,The number of seconds to wait after no character was input to log out of a serial or USB console session. This value takes precedence over hpSwitchSessionGlobalIdleTimeout for the serial or USB console. Valid values are -1 (no override), or 0 (no timeout) through 7200 (two hours).
.1.3.6.1.4.1.11.2.14.11.5.1.7.1.2.10,CONFIG-MIB::hpSwitchMaxSessions,INTEGER,read-write,,mandatory,,Specifies the maximum number of concurrent sessions supported by the device.
.1.3.6.1.4.1.11.2.14.11.5.1.7.1.2.11,CONFIG-MIB::hpSwitchMaxUserSessions,INTEGER,read-write,,mandatory,,Specifies the maximum number of concurrent sessions allowed per user.
.1.3.6.1.4.1.11.2.14.11.5.1.7.1.3,CONFIG-MIB::hpSwitchPortConfig,,,,,,
.1.3.6.1.4.1.11.2.14.11.5.1.7.1.3.1,CONFIG-MIB::hpSwitchPortTable,,not-accessible,,mandatory,,A table that contains information about the current port status in this device.
.1.3.6.1.4.1.11.2.14.11.5.1.7.1.3.1.1,CONFIG-MIB::hpSwitchPortEntry,,not-accessible,hpSwitchPortIndex,mandatory,,Information about a specific port status in this device.
.1.3.6.1.4.1.11.2.14.11.5.1.7.1.3.1.1.1,CONFIG-MIB::hpSwitchPortIndex,INTEGER,read-only,,mandatory,,The ifIndex value which uniquely identifies a row in the Interfaces Table.
.1.3.6.1.4.1.11.2.14.11.5.1.7.1.3.1.1.2,CONFIG-MIB::hpSwitchPortType,INTEGER,read-only,,mandatory,other(1):none(2):unknown(3):ethernetCsmacd(6):iso88023Csmacd(7):fddi(15):atm(37):propMultiplexor(54):ieee80212(55):fastEther(62):fastEtherFX(69):fastEtherFX-sfp(70):tenGSFP-SR(112):tenGSFP-LR(113):tenGSFP-ER(114):tenGSFP-LRM(115):tenGSFP-LX4(116):gigabitEthernetSX(117):gigabitEthernetLX(118):gigabitEthernetT(119):gigabitEthernetStk(120):gigabitEthernetLH(121):tenGbE-CX4(122):gigabitEthernetESP(123):tenGbE-SR(124):tenGbE-ER(125):tenGbE-LR(126):gigabitEthernetT-sfp(127):fastEtherGEN(128):gigabitEthernetGEN(129):tenGbE-GEN(130):fastEtherBX-D(131):fastEtherBX-U(132):gigabitEthernetBX-D(133):gigabitEthernetBX-U(134):tenGbE-LRM(135):sFP-PLUS-SR(136):sFP-PLUS-LR(137):sFP-PLUS-LRM(138):sFP-PLUS-DAC(139):sFP-PLUS-DA1(140):sFP-PLUS-DA2(141):sFP-PLUS-DA3(142):sFP-PLUS-DA5(143):sFP-PLUS-DA7(144):sFP-PLUS-DA10(145):sFP-PLUS-DA15(146):sFP-PLUS-DA20(147):tenGbE-T(148):tenGbE-TSH(149):tenGbE-TLH(150):tenGbE-STK(151):xFP-SFP-PLUS-DAC(152):xFP-SFP-PLUS-DA1(153):xFP-SFP-PLUS-DA3(154):xFP-SFP-PLUS-DA5(155):xFP-SFP-PLUS-DA7(156):xFP-SFP-PLUS-DA10(157):tenGbE-K(158):sFP-PLUS-ER(160):sFP-CWDM1470(161):sFP-CWDM1490(162):sFP-CWDM1510(163):sFP-CWDM1530(164):sFP-CWDM1550(165):sFP-CWDM1570(166):sFP-CWDM1590(167):sFP-CWDM1610(168):tenGigabitEthernetESP(169):fourGbE-GEN(170):fortyGbE-GEN(171):qSFP-PLUS-SR4(172):qSFP-PLUS-eSR4(173):qSFP-PLUS-LR4(174):qSFP-PLUS-DA1(175):qSFP-PLUS-DA3(176):qSFP-PLUS-DA5(177):qSFP-PLUS-SPLIT-sFP-PLUS-DA1(178):qSFP-PLUS-SPLIT-sFP-PLUS-DA3(179):qSFP-PLUS-SPLIT-sFP-PLUS-DA5(180):sFP-PLUS-AO1(181):sFP-PLUS-AO2(182):sFP-PLUS-AO3(183):sFP-PLUS-AO5(184):sFP-PLUS-AO7(185):sFP-PLUS-AO10(186):sFP-PLUS-AO15(187):qSFP-PLUS-AO1(188):qSFP-PLUS-AO2(189):qSFP-PLUS-AO3(190):qSFP-PLUS-AO5(191):qSFP-PLUS-AO7(192):qSFP-PLUS-AO10(193):qSFP-PLUS-AO15(194):qSFP-PLUS-AO20(195):qSFP-PLUS-SPLIT-sFP-PLUS-AO1(196):qSFP-PLUS-SPLIT-sFP-PLUS-AO2(197):qSFP-PLUS-SPLIT-sFP-PLUS-AO3(198):qSFP-PLUS-SPLIT-sFP-PLUS-AO5(199):qSFP-PLUS-SPLIT-sFP-PLUS-AO7(200):qSFP-PLUS-SPLIT-sFP-PLUS-AO10(201):qSFP-PLUS-SPLIT-sFP-PLUS-AO15(202),The type of port.
.1.3.6.1.4.1.11.2.14.11.5.1.7.1.3.1.1.3,CONFIG-MIB::hpSwitchPortDescr,OCTET,read-only,,mandatory,,A textual string containing information about the interface.
.1.3.6.1.4.1.11.2.14.11.5.1.7.1.3.1.1.4,CONFIG-MIB::hpSwitchPortAdminStatus,INTEGER,read-write,,obsolete,enable(1):disable(2),The desired state of the interface. This variable is similar to the ifAdminStatus but instead of keeping the operational status, this variable maintain the desired state in the configuration data base.
.1.3.6.1.4.1.11.2.14.11.5.1.7.1.3.1.1.5,CONFIG-MIB::hpSwitchPortEtherMode,INTEGER,read-write,,mandatory,half-duplex(1):full-duplex(2),The type of transmission on this port. This variable is valid only if the hpSwitchPortType was Ethernet.
.1.3.6.1.4.1.11.2.14.11.5.1.7.1.3.1.1.6,CONFIG-MIB::hpSwitchPortVgMode,INTEGER,read-write,,mandatory,master(1):endNode(2):autoDetect(3),The type of transmission on this port. This variable is valid only if the hpSwitchPortType was VG.
.1.3.6.1.4.1.11.2.14.11.5.1.7.1.3.1.1.7,CONFIG-MIB::hpSwitchPortLinkbeat,INTEGER,read-write,,mandatory,enable(1):disable(2),The linkbeat status of this port.
.1.3.6.1.4.1.11.2.14.11.5.1.7.1.3.1.1.8,CONFIG-MIB::hpSwitchPortTrunkGroup,INTEGER,read-write,,mandatory,,The trunk group this port belong to.
.1.3.6.1.4.1.11.2.14.11.5.1.7.1.3.1.1.9,CONFIG-MIB::hpSwitchPortBcastLimit,INTEGER,read-write,,mandatory,,The percentage of network bandwidth consumed by broadcast traffic through this port. If the value of this variable is 0, there will be no broadcast limit.
.1.3.6.1.4.1.11.2.14.11.5.1.7.1.3.1.1.10,CONFIG-MIB::hpSwitchPortFastEtherMode,INTEGER,read-write,,mandatory,half-duplex-10Mbits(1):half-duplex-100Mbits(2):full-duplex-10Mbits(3):full-duplex-100Mbits(4):auto-neg(5):full-duplex-1000Mbits(6):auto-10Mbits(7):auto-100Mbits(8):auto-1000Mbits(9):auto-10Gbits(10):auto-10-100Mbits(11):auto-40Gbits(12):auto-2500Mbits(13):auto-5000Mbits(14):auto-2500-5000Mbits(15):auto-1000-2500Mbits(16):auto-1000-2500-5000Mbits(17),This object provides the mode of data transfer operation on a port. The port can transfer the data either in full-duplex or in half-duplex mode.  In full-duplex mode, the port can send and receive the data simultaneously.  In half-duplex mode, the port can either send or receive data at any given time. In auto mode, the port negotiates the duplex mode with the port at the other end of the link.  When configured in auto mode at both ends of the link, the port conforms to the following duplex modes for different Ethernet types: Ethernet (10 Mbps) - Half-duplex Fast Ethernet (100 Mbps) - Half-duplex Gigabit Ethernet (1 Gbps) - Full-duplex 10 Gigabit Ethernet (10 Gbps) - Full-duplex 40 Gigabit Ethernet (40 Gbps) - Full-duplex .
.1.3.6.1.4.1.11.2.14.11.5.1.7.1.3.1.1.11,CONFIG-MIB::hpSwitchPortFlowControl,INTEGER,read-write,,mandatory,disable(1):enable(2),The Flow Control of this port.
.1.3.6.1.4.1.11.2.14.11.5.1.7.1.3.1.1.13,CONFIG-MIB::hpSwitchPortTrunkType,INTEGER,read-write,,mandatory,trunk(1):fecAuto(2):saTrunk(3):lacpTrk(4):none(5):dtLacpTrk(6):dtTrunk(7),Used in conjunction with hpSwitchPortTrunkGroup to determine what type of trunk and which group it belongs to. If hpSwitchPortTrunkGroup is set to 0, trunking is disabled on the port and this variable becomes a 'don't care'
.1.3.6.1.4.1.11.2.14.11.5.1.7.1.3.1.1.14,CONFIG-MIB::hpSwitchPortTrunkLACPStatus,INTEGER,read-write,,mandatory,disabled(1):active(2):passive(3),Used in conjunction with hpSwitchPortTrunkType. When the trunk is a LACP trunk, this variable defines its administrative status
.1.3.6.1.4.1.11.2.14.11.5.1.7.1.3.1.1.15,CONFIG-MIB::hpSwitchPortMDIXStatus,INTEGER,read-only,,mandatory,not-applicable(1):mdi(2):mdix(3):automdix(4),Shows the MDI/MDIX setting for an RJ-45 port. Returns a value of 'not-applicable' for all ports except RJ-45 ports.
.1.3.6.1.4.1.11.2.14.11.5.1.7.1.3.1.1.16,CONFIG-MIB::hpSwitchPortAutoMDIX,INTEGER,read-write,,mandatory,not-applicable(1):mdi(2):mdix(3):automdix(4),Sets the MDI/MDIX value for an RJ-45 port. Negates need for crossover cables. 'automdix', 'mdi', or 'mdix' may be set when the port configuration is set to any auto-negotiation mode, for example 'auto' or 'auto-100', or to any of the fixed-configuration modes, for example '100-full'. The MDI/MDIX value is maintained across port  configuration mode changes.
.1.3.6.1.4.1.11.2.14.11.5.1.7.1.3.1.1.17,CONFIG-MIB::hpSwitchPortLACPKey,INTEGER,read-write,,mandatory,,This is the key associated with the port. The user can configure this key to control the dynamic link aggregation. The ports with the same key can be aggregated in the single trunk. The key can also be configured with dot3adAggPortActorAdminKey mib but it will be created only when the LACP is enabled on the port.
.1.3.6.1.4.1.11.2.14.11.5.1.7.1.3.1.1.18,CONFIG-MIB::hpSwitchPortTrafficTemplateName,OCTET,read-only,,mandatory,,The name of Traffic template that is applied to this port defining the priority to queue mapping.
.1.3.6.1.4.1.11.2.14.11.5.1.7.1.3.1.1.19,CONFIG-MIB::hpSwitchPortEEEAdminStatus,INTEGER,read-write,,mandatory,enable(1):disable(2),This indicates the Admin status of the port EEE. This says whether energy-efficient-ethernet is enabled or disabled on the port.
.1.3.6.1.4.1.11.2.14.11.5.1.7.1.3.1.1.20,CONFIG-MIB::hpSwitchPortEEEOperStatus,INTEGER,read-only,,mandatory,notSupported(1):active(2):inactive(3),This indicates the current operational status of the port  EEE.  NotSupported indicates that the local PHY do not have EEE capability. Active indicates that the port is operating in EEE mode. Inactive indicates that EEE is disabled on the port or EEE is disabled on the remote end port.
.1.3.6.1.4.1.11.2.14.11.5.1.7.1.3.1.1.21,CONFIG-MIB::hpSwitchPortEEECurrentTwSysTx,INTEGER,read-only,,deprecated,,This indicates the current period of time the  system has to wait between a request to transmit and its readiness to transmit.
.1.3.6.1.4.1.11.2.14.11.5.1.7.1.3.1.1.22,CONFIG-MIB::hpSwitchPortEEEMinTwSysTx,INTEGER,read-only,,deprecated,,This indicates the minimum period of time the  system has to wait between a request to transmit and its readiness to transmit.
.1.3.6.1.4.1.11.2.14.11.5.1.7.1.3.1.1.23,CONFIG-MIB::hpSwitchPortEEEMaxTwSysTx,INTEGER,read-only,,deprecated,,This indicates the maximum period of time the  system has to wait between a request to transmit and its readiness to transmit.
.1.3.6.1.4.1.11.2.14.11.5.1.7.1.3.1.1.25,CONFIG-MIB::hpSwitchPortPvid,INTEGER,read-only,,mandatory,,This indicates the vlan in which the given port is untagged in.
.1.3.6.1.4.1.11.2.14.11.5.1.7.1.3.1.1.26,CONFIG-MIB::hpSwitchPortTaggedVlanMap1k,OCTET,read-only,,mandatory,,A string of octets containing one bit per VLAN ID in the range 1 through 1024. The first octet corresponds to VLAN IDs 1 through 8, the second octet to VLAN IDs 9 through 16, etc. Within each octet, the most significant bit represents the lowest numbered VLAN ID, and the least significant bit represents the highest numbered VLAN ID. If a bit is set to 1, then the given  port is tagged in the corresponding VLAN .
.1.3.6.1.4.1.11.2.14.11.5.1.7.1.3.1.1.27,CONFIG-MIB::hpSwitchPortTaggedVlanMap2k,OCTET,read-only,,mandatory,,A string of octets containing one bit per VLAN ID in the range 1025 through 2048. The first octet corresponds to VLAN IDs 1025 through 1032, the second octet to VLAN IDs 1033 through 1040, etc. Within each octet, the most significant bit represents the lowest numbered VLAN ID, and the least significant bit represents the highest numbered VLAN ID.If a bit is set to 1, then the given port is tagged in the corresponding VLAN .
.1.3.6.1.4.1.11.2.14.11.5.1.7.1.3.1.1.28,CONFIG-MIB::hpSwitchPortTaggedVlanMap3k,OCTET,read-only,,mandatory,,A string of octets containing one bit per VLAN ID in the range 2049 through 3072. The first octet corresponds to VLAN IDs 2049 through 2056, the second octet to VLAN IDs 2057 through 2064, etc. Within each octet, the most significant bit represents the lowest numbered VLAN ID, and the least significant bit represents the highest numbered VLAN ID.If a bit is set to 1, then the given port is tagged in the corresponding VLAN .
.1.3.6.1.4.1.11.2.14.11.5.1.7.1.3.1.1.29,CONFIG-MIB::hpSwitchPortTaggedVlanMap4k,OCTET,read-only,,mandatory,,A string of octets containing one bit per VLAN ID in the range 3073 through 4096. The first octet corresponds to VLAN IDs 3073 through 3080, the second octet to VLAN IDs 3081 through 3088, etc. Within each octet, the most significant bit represents the lowest numbered VLAN ID, and the least significant bit represents the highest numbered VLAN ID. If a bit is set to 1, then the given port is tagged in the corresponding VLAN .
.1.3.6.1.4.1.11.2.14.11.5.1.7.1.3.1.1.30,CONFIG-MIB::hpSwitchPortEEECurrentTwSysTx1,INTEGER,read-only,,mandatory,,This indicates the current period of time the  system has to wait between a request to transmit and its readiness to transmit.
.1.3.6.1.4.1.11.2.14.11.5.1.7.1.3.1.1.31,CONFIG-MIB::hpSwitchPortEEEMinTwSysTx1,INTEGER,read-only,,mandatory,,This indicates the minimum period of time the  system has to wait between a request to transmit and its readiness to transmit.
.1.3.6.1.4.1.11.2.14.11.5.1.7.1.3.1.1.32,CONFIG-MIB::hpSwitchPortEEEMaxTwSysTx1,INTEGER,read-only,,mandatory,,This indicates the maximum period of time the  system has to wait between a request to transmit and its readiness to transmit.
.1.3.6.1.4.1.11.2.14.11.5.1.7.1.3.2,CONFIG-MIB::hpSwitchPortConfigStatus,INTEGER,read-only,,mandatory,active(1):notInService(2):notReady(3),The configuration status of this group of objects. If one or more variables in this group were reconfigured since last reboot and required reboot to take effect, the value of this variable will be set to notInService.
.1.3.6.1.4.1.11.2.14.11.5.1.7.1.3.3,CONFIG-MIB::hpSwitchLinkUpDownTrapAllPortsStatus,INTEGER,read-write,,mandatory,enable(1):disable(2),Used to either enable/disable the Link Up/Link Down traps for all the ports.
.1.3.6.1.4.1.11.2.14.11.5.1.7.1.4,CONFIG-MIB::hpSwitchIpxConfig,,,,,,
.1.3.6.1.4.1.11.2.14.11.5.1.7.1.4.2,CONFIG-MIB::hpSwitchIpxConfigStatus,INTEGER,read-only,,mandatory,active(1):notInService(2):notReady(3),The status of the IPX configuration table.
.1.3.6.1.4.1.11.2.14.11.5.1.7.1.5,CONFIG-MIB::hpSwitchIpConfig,,,,,,
.1.3.6.1.4.1.11.2.14.11.5.1.7.1.5.1,CONFIG-MIB::hpSwitchIpTimepAdminStatus,INTEGER,read-write,,mandatory,manual(1):disable(2):dhcp(3),The operational status of the Time protocol.
.1.3.6.1.4.1.11.2.14.11.5.1.7.1.5.2,CONFIG-MIB::hpSwitchIpTimepServerAddr,IpAddress,read-write,,deprecated,,### deprecated ### The IP address of the Time server.
.1.3.6.1.4.1.11.2.14.11.5.1.7.1.5.3,CONFIG-MIB::hpSwitchIpTimepPollInterval,INTEGER,read-write,,mandatory,,The client poll interval of the Time server in minutes.
.1.3.6.1.4.1.11.2.14.11.5.1.7.1.5.5,CONFIG-MIB::hpSwitchIpConfigStatus,INTEGER,read-only,,obsolete,active(1):notInService(2):notReady(3),The configuration status of the Timep and IP related objects.
.1.3.6.1.4.1.11.2.14.11.5.1.7.1.5.6,CONFIG-MIB::hpSwitchIpTftpMode,INTEGER,read-write,,obsolete,secure(1):unsecure(2),The operational mode of the Tftp protocol. This object is obsoleted by  hpicfDownloadTftpServerConfig.
.1.3.6.1.4.1.11.2.14.11.5.1.7.1.5.7,CONFIG-MIB::hpSwitchIpTimepInetServerAddrType,INTEGER,read-write,,mandatory,unknown(0):ipv4(1):ipv6(2):ipv4z(3):ipv6z(4):dns(16),The IP address type of the Time server.
.1.3.6.1.4.1.11.2.14.11.5.1.7.1.5.8,CONFIG-MIB::hpSwitchIpTimepInetServerAddr,OCTET,read-write,,mandatory,,The IP address (of the Time server)to which this entry's addressing information pertains. hpSwitchIpTimepInetServerAddr is always interpreted within  the context of hpSwitchIpTimepInetServerAddrType.
.1.3.6.1.4.1.11.2.14.11.5.1.7.1.5.9,CONFIG-MIB::hpSwitchIpTimepIsOobm,INTEGER,read-write,,mandatory,true(1):false(2),This object indicates whether this TIMEP Server is reachable over OOBM (Out Of Band Management) interface or not. This mib object will be applicable only if there is a physical OOBM port on the device.
.1.3.6.1.4.1.11.2.14.11.5.1.7.1.6,CONFIG-MIB::hpSwitchSerialLinkConfig,,,,,,
.1.3.6.1.4.1.11.2.14.11.5.1.7.1.6.1,CONFIG-MIB::hpSwitchSLinkBaudRate,INTEGER,read-write,,mandatory,speedSense(1):baudRate300(2):baudRate600(3):baudRate1200(4):baudRate2400(5):baudRate4800(6):baudRate9600(7):baudRate19200(8):baudRate38400(9):baudRate57600(10):baudRate115200(11),The rate of data transfer between the console and the node. baudRate1 is speed sense.
.1.3.6.1.4.1.11.2.14.11.5.1.7.1.6.2,CONFIG-MIB::hpSwitchSLinkFlowCtrl,INTEGER,read-write,,mandatory,none(1):xonXoff(2):robustXonXoff(3),The flow-control mechanism between the console and the switch.
.1.3.6.1.4.1.11.2.14.11.5.1.7.1.6.3,CONFIG-MIB::hpSwitchSLinkConnInactTime,INTEGER,read-write,,deprecated,,The number of minutes to wait after no character was input to log out the console. Valid values are 0 (not to log out of the console for inactivity) through 120 (two hours).
.1.3.6.1.4.1.11.2.14.11.5.1.7.1.6.4,CONFIG-MIB::hpSwitchSLinkModemConnTime,INTEGER,read-write,,mandatory,,The number of seconds to wait for data mode and clear to send and receive ready signals after asserting request to send and terminal ready signals. Valid values are 0 (switch will wait forever for the modem) through 300 (5 minutes).
.1.3.6.1.4.1.11.2.14.11.5.1.7.1.6.5,CONFIG-MIB::hpSwitchSLinkModemLostRecvTime,INTEGER,read-write,,mandatory,,The number of milliseconds the receiver ready signal is allowed to drop before the switch will disconnect the modem. Valid values are 0 (the switch will wait forever) through 5000 (5 seconds).
.1.3.6.1.4.1.11.2.14.11.5.1.7.1.6.6,CONFIG-MIB::hpSwitchSLinkModemDisConnTime,INTEGER,read-write,,mandatory,,The number of seconds to wait after the modem is disconnected before allowing the modem to be reconnected. Valid values are 0 (allow a connection as soon as possible, the default) through 60 (1 minute).
.1.3.6.1.4.1.11.2.14.11.5.1.7.1.6.7,CONFIG-MIB::hpSwitchSLinkParity,INTEGER,read-only,,mandatory,parityNone(1):parityOdd(2):parityEven(3),The type of parity to use between the console and the node.
.1.3.6.1.4.1.11.2.14.11.5.1.7.1.6.8,CONFIG-MIB::hpSwitchSLinkCharBits,INTEGER,read-only,,mandatory,char8Bits(1):char7Bits(2),The number of bits per character to use between the console and the node.
.1.3.6.1.4.1.11.2.14.11.5.1.7.1.6.9,CONFIG-MIB::hpSwitchSLinkStopBits,INTEGER,read-only,,mandatory,stop1Bits(1):stop1andHalfBits(2):stop2Bits(3),The number of stop bots to use when communicating between the console and the node.
.1.3.6.1.4.1.11.2.14.11.5.1.7.1.6.10,CONFIG-MIB::hpSwitchSLinkConfigStatus,INTEGER,read-only,,mandatory,active(1):notInService(2):notReady(3),The configuration status of this group of objects. If one or more variables in this group were reconfigured since last reboot and required reboot to take effect, the value of this variable will be set to notInService.
.1.3.6.1.4.1.11.2.14.11.5.1.7.1.8,CONFIG-MIB::hpSwitchFilterConfig,,,,,,
.1.3.6.1.4.1.11.2.14.11.5.1.7.1.8.1,CONFIG-MIB::hpSwitchFilterConfigTable,,not-accessible,,mandatory,,A table that contains information about the  traffic filter configuration in this device.
.1.3.6.1.4.1.11.2.14.11.5.1.7.1.8.1.1,CONFIG-MIB::hpSwitchFilterConfigEntry,,not-accessible,hpSwitchFilterIndex,mandatory,,Information about a traffic filter configuration  in this device.
.1.3.6.1.4.1.11.2.14.11.5.1.7.1.8.1.1.1,CONFIG-MIB::hpSwitchFilterIndex,INTEGER,read-only,,mandatory,,An index that uniquely identifies a traffic filter for which this entry contains information.
.1.3.6.1.4.1.11.2.14.11.5.1.7.1.8.1.1.2,CONFIG-MIB::hpSwitchFilterType,INTEGER,read-write,,mandatory,multicast(1):level-3(2):port(3):unicast(4),The type of filter.
.1.3.6.1.4.1.11.2.14.11.5.1.7.1.8.1.1.3,CONFIG-MIB::hpSwitchFilterSrcPort,INTEGER,read-write,,mandatory,,This variable is required when a port filter or unicast filter was configured. It will be ignored otherwise.
.1.3.6.1.4.1.11.2.14.11.5.1.7.1.8.1.1.4,CONFIG-MIB::hpSwitchFilterMacAddr,OCTET,read-write,,mandatory,,This variable is valid only if a unicast or multicast filter was defined. It will be ignored otherwise.
.1.3.6.1.4.1.11.2.14.11.5.1.7.1.8.1.1.5,CONFIG-MIB::hpSwitchFilterProtocolType,INTEGER,read-write,,mandatory,,This variable is valid only if a level-3 filter was defined. It will be ignored otherwise. This variable will contain either a etherType (DIX Ethernet) or SAP(IEEE 802) value of the level-3 protocol.
.1.3.6.1.4.1.11.2.14.11.5.1.7.1.8.1.1.6,CONFIG-MIB::hpSwitchFilterPortMask,OCTET,read-write,,mandatory,,This variable specifies a group of ports whose traffic will be filtered. Each octet within the value of this object specifies a set of eight ports, with the first octet specifying ports 1 through 8, the second octet specifying ports 9 through 16, etc. Within each octet, the most significant bit represents the lowest numbered port, and the least significant bit represents the highest numbered port. Thus, each port of the switch is represented by a single bit within the value of this object.
.1.3.6.1.4.1.11.2.14.11.5.1.7.1.8.1.1.7,CONFIG-MIB::hpSwitchFilterEntryStatus,INTEGER,read-write,,mandatory,active(1):notInService(2):notReady(3):createAndGo(4):createAndWait(5):destroy(6),The status of a filter entry.
.1.3.6.1.4.1.11.2.14.11.5.1.7.1.8.1.1.8,CONFIG-MIB::hpSwitchFilterName,OCTET,read-write,,mandatory,,This variable applies only when 'hpSwitchFilterType' is  port. This variable specifies the filter name and can only be specified for named filters.  Filter name can be upto 20 characters long and cannot  contain tilde (~).  when a entry is created without specifying this variable,  port-name will be assumed as filter-name (unnamed-filter).  Filter-name for named filter should be present in 'hpicfBridgeFilterName' before a port can be mapped to it.
.1.3.6.1.4.1.11.2.14.11.5.1.7.1.8.2,HP-SWITCH-BASIC-CONFIG-MIB::hpicfBridgeFilterConfigTable,,not-accessible,,current,,A table that contains information about the  source port traffic filter configuration in this device.
.1.3.6.1.4.1.11.2.14.11.5.1.7.1.8.2.1,HP-SWITCH-BASIC-CONFIG-MIB::hpicfBridgeFilterConfigEntry,,not-accessible,hpicfBridgeFilterName,current,,Information about a source port traffic filter configuration in this device.
.1.3.6.1.4.1.11.2.14.11.5.1.7.1.8.2.1.1,HP-SWITCH-BASIC-CONFIG-MIB::hpicfBridgeFilterName,OCTET,not-accessible,,current,,This variable specifies the name of the  filter. Filter name can be upto 20 characters. Filter name cannot contain tilde (~).  A filter name can not be same as port-name.
.1.3.6.1.4.1.11.2.14.11.5.1.7.1.8.2.1.2,HP-SWITCH-BASIC-CONFIG-MIB::hpicfBridgeFilterDropPortMask,OCTET,read-create,,current,,This variable specifies a group of ports to which  forwarding of filtered traffic is not permitted.
.1.3.6.1.4.1.11.2.14.11.5.1.7.1.8.2.1.3,HP-SWITCH-BASIC-CONFIG-MIB::hpicfBridgeFilterEntryStatus,INTEGER,read-create,,current,active(1):notInService(2):notReady(3):createAndGo(4):createAndWait(5):destroy(6),Row can be deleted only when no port are mapped to this filter in 'hpSwitchFilterConfigEntry' table.
.1.3.6.1.4.1.11.2.14.11.5.1.7.1.9,CONFIG-MIB::hpSwitchProbeConfig,,,,,,
.1.3.6.1.4.1.11.2.14.11.5.1.7.1.9.1,CONFIG-MIB::hpSwitchProbeType,INTEGER,read-write,,obsolete,ports(1):vlan(2),If the value of this variable is equal to 1, the probe will monitor those ports specified by hpSwitchProbedPortMask, otherwise all of the port belong to the virtual LAN specified by hpSwitchProbedVlanId will be monitored.
.1.3.6.1.4.1.11.2.14.11.5.1.7.1.9.2,CONFIG-MIB::hpSwitchProbedVlanId,Integer32,read-write,,obsolete,,The probed virtual LAN.
.1.3.6.1.4.1.11.2.14.11.5.1.7.1.9.3,CONFIG-MIB::hpSwitchProbePort,INTEGER,read-write,,obsolete,,The port that every packet passes through those probed ports will be copied to.
.1.3.6.1.4.1.11.2.14.11.5.1.7.1.9.4,CONFIG-MIB::hpSwitchProbeAdminStatus,INTEGER,read-write,,obsolete,enable(1):disable(2),The operational status of the probing function
.1.3.6.1.4.1.11.2.14.11.5.1.7.1.9.5,CONFIG-MIB::hpSwitchProbedPortMask,OCTET,read-write,,obsolete,,This variable specifies a group of ports which will be probed. Each octet within the value of this object specifies a set of eight ports, with the first octet specifying ports 1 through 8, the second octet specifying ports 9 through 16, etc. Within each octet, the most significant bit represents the lowest numbered port, and the least significant bit represents the highest numbered port. Thus, each port of the switch is represented by a single bit within the value of this object.
.1.3.6.1.4.1.11.2.14.11.5.1.7.1.11,CONFIG-MIB::hpSwitchFddiIpFragConfig,,,,,,
.1.3.6.1.4.1.11.2.14.11.5.1.7.1.11.1,CONFIG-MIB::hpSwitchFddiIpFragConfigTable,,not-accessible,,mandatory,,A list of IP fragmentation configuration  parameters for the FDDI cards in the switch.
.1.3.6.1.4.1.11.2.14.11.5.1.7.1.11.1.1,CONFIG-MIB::hpSwitchFddiIpFragConfigEntry,,not-accessible,hpSwitchFddiIpFragConfigIndex,mandatory,,An Fddi IP fragmentation entry which is  containing configurable options for the FDDI  cards in the switch.
.1.3.6.1.4.1.11.2.14.11.5.1.7.1.11.1.1.1,CONFIG-MIB::hpSwitchFddiIpFragConfigIndex,INTEGER,read-only,,mandatory,,A unique value for each FDDI Card.  The value for each FDDI card must remain constant  at least from one re-initialization of the entity's  network management system to the next  re-initialization.
.1.3.6.1.4.1.11.2.14.11.5.1.7.1.11.1.1.2,CONFIG-MIB::hpSwitchFddiIpFragConfigStatus,INTEGER,read-write,,mandatory,enable(1):disable(2),The operational status of FDDI IP fragmentation for each FDDI card.  enable(1): FDDI card will fragment all packets which are bigger than the Ethernet packet size  limitation, 1518 Bytes. disable(2): FDDI card will drop all packets which are bigger than the Ethernet packet size  limitation, 1518 Bytes.
.1.3.6.1.4.1.11.2.14.11.5.1.7.1.12,CONFIG-MIB::hpSwitchABCConfig,,,,,,
.1.3.6.1.4.1.11.2.14.11.5.1.7.1.12.1,CONFIG-MIB::hpSwitchABCConfigTable,,not-accessible,,mandatory,,A list of Automatic Broadcast Control (ABC disable/enable entries for each VLAN on the switch.
.1.3.6.1.4.1.11.2.14.11.5.1.7.1.12.1.1,CONFIG-MIB::hpSwitchABCConfigEntry,,not-accessible,hpSwitchABCConfigVlan,mandatory,,Contains the ABC status for each VLAN on the switch, including IP RIP control and IPX RIP/SAP control.
.1.3.6.1.4.1.11.2.14.11.5.1.7.1.12.1.1.1,CONFIG-MIB::hpSwitchABCConfigVlan,Integer32,read-only,,mandatory,,The user is able to enable/disable ABC on a per VLAN basis, so the VLAN serves as an index into the ABC configuration table.
.1.3.6.1.4.1.11.2.14.11.5.1.7.1.12.1.1.2,CONFIG-MIB::hpSwitchABCConfigControl,INTEGER,read-write,,mandatory,ipipx(1):ip(2):ipx(3):disable(4),ABC control is either IP&IPX or IP or IPX or disabled  for each VLAN on the switch.
.1.3.6.1.4.1.11.2.14.11.5.1.7.1.12.1.1.3,CONFIG-MIB::hpSwitchABCConfigIpRipControl,INTEGER,read-write,,mandatory,enable(1):disable(2),IP RIP control. If this feature is enabled then IP RIP packets will only be forwarded on ports, within its VLAN domain, that have heard RIPs before. If this feature is disabled then IP RIP packets seen by a given port will be forwarded to all ports within its VLAN domain.
.1.3.6.1.4.1.11.2.14.11.5.1.7.1.12.1.1.4,CONFIG-MIB::hpSwitchABCConfigIpxRipSapControl,INTEGER,read-write,,mandatory,enable(1):disable(2),IPX RIP/SAP control. If this feature is enabled then IPX RIP/SAP packets will only be forwarded on ports, within its VLAN domain, that have previously seen RIP/SAP packets. If this feature is disabled then IPX RIP and SAP packets seen by a given port will be forwarded to all ports within its VLAN domain.
.1.3.6.1.4.1.11.2.14.11.5.1.7.1.12.1.1.5,CONFIG-MIB::hpSwitchABCConfigVlanBcastLimit,INTEGER,read-write,,mandatory,,The percentage of network bandwidth consumed by broadcast traffic through VLAN. If the value of this variable is 0, there will be no broadcast limit. There is a default value chosen when ABC is enabled.
.1.3.6.1.4.1.11.2.14.11.5.1.7.1.12.1.1.7,CONFIG-MIB::hpSwitchABCConfigAutoGatewayConfig,INTEGER,read-write,,mandatory,enable(1):disable(2),If this feature is enabled then DHCP packets both ucast and bcast with UDP destination port 68 will be intercepted. DHCP packets with the router option in the options field in the DHCP message will be modified so that the first daddress in the router option is the same as the clients address. Thus the client will be its own default gateway. If this feature is disabled DHCP packets will be forwarded as usual.
.1.3.6.1.4.1.11.2.14.11.5.1.7.1.14,CONFIG-MIB::hpSwitchStpConfig,,,,,,
.1.3.6.1.4.1.11.2.14.11.5.1.7.1.14.1,CONFIG-MIB::hpSwitchStpVlanTable,,not-accessible,,mandatory,,A table that contains vlan-specific information for the Spanning Tree Protocol.
.1.3.6.1.4.1.11.2.14.11.5.1.7.1.14.1.1,CONFIG-MIB::hpSwitchStpVlanEntry,,not-accessible,hpSwitchStpVlan,mandatory,,A list of information maintained by every port about the Spanning Tree Protocol state for that port.
.1.3.6.1.4.1.11.2.14.11.5.1.7.1.14.1.1.1,CONFIG-MIB::hpSwitchStpVlan,Integer32,read-only,,mandatory,,The VLAN ID for which this entry contains STP configuration.
.1.3.6.1.4.1.11.2.14.11.5.1.7.1.14.1.1.2,CONFIG-MIB::hpSwitchStpAdminStatus,INTEGER,read-write,,mandatory,enable(1):disable(2),The admin status of the spanning tree protocol.
.1.3.6.1.4.1.11.2.14.11.5.1.7.1.14.1.1.3,CONFIG-MIB::hpSwitchStpPriority,INTEGER,read-write,,mandatory,,The value of the write-able portion of the Bridge ID, i.e., the first two octets of the (8 octet long) Bridge ID. The other (last) 6 octets of the Bridge ID are given by the value of dot1dBaseBridgeAddress.
.1.3.6.1.4.1.11.2.14.11.5.1.7.1.14.1.1.4,CONFIG-MIB::hpSwitchStpMaxAge,INTEGER,read-write,,mandatory,,The maximum age of Spanning Tree Protocol information learned from the network on any port before it is discarded, in units of hundredths of a second. This is the actual value that this bridge is currently using.
.1.3.6.1.4.1.11.2.14.11.5.1.7.1.14.1.1.5,CONFIG-MIB::hpSwitchStpHelloTime,INTEGER,read-write,,mandatory,,The amount of time between the transmission of Configuration bridge PDUs by this node on any port when it is the root of the spanning tree or trying to become so, in units of hundredths of a second. This is the actual value that this bridge is currently using.
.1.3.6.1.4.1.11.2.14.11.5.1.7.1.14.1.1.6,CONFIG-MIB::hpSwitchStpForwardDelay,INTEGER,read-write,,mandatory,,This time value, measured in units of hundredths of a second, controls how fast a port changes its spanning state when moving towards the Forwarding state. The value determines how long the port stays in each of the Listening and Learning states, which precede the Forwarding state. This value is also used, when a topology change has been detected and is underway, to age all dynamic entries in the Forwarding Database. [Note that this value is the one that this bridge is currently using, in contrast to dot1dBridgeForwardDelay which is the value that this bridge and all others would start using if/when this bridge were to become the root.]
.1.3.6.1.4.1.11.2.14.11.5.1.7.1.14.2,CONFIG-MIB::hpSwitchStpPortTable,,not-accessible,,mandatory,,A table that contains port-specific information for the Spanning Tree Protocol.
.1.3.6.1.4.1.11.2.14.11.5.1.7.1.14.2.1,CONFIG-MIB::hpSwitchStpPortEntry,,not-accessible,hpSwitchStpPort,mandatory,,A list of information maintained by every port about the Spanning Tree Protocol state for that port.
.1.3.6.1.4.1.11.2.14.11.5.1.7.1.14.2.1.1,CONFIG-MIB::hpSwitchStpPort,INTEGER,read-only,,mandatory,,The port number of the port for which this entry contains Spanning Tree Protocol management information.
.1.3.6.1.4.1.11.2.14.11.5.1.7.1.14.2.1.2,CONFIG-MIB::hpSwitchStpPortType,INTEGER,read-only,,mandatory,other(1):none(2):unknown(3):ethernetCsmacd(6):iso88023Csmacd(7):fddi(15):atm(37):propMultiplexor(54):ieee80212(55):fastEther(62):fastEtherFX(69):fastEtherFX-sfp(70):tenGSFP-SR(112):tenGSFP-LR(113):tenGSFP-ER(114):tenGSFP-LRM(115):tenGSFP-LX4(116):gigabitEthernetSX(117):gigabitEthernetLX(118):gigabitEthernetT(119):gigabitEthernetStk(120):gigabitEthernetLH(121):tenGbE-CX4(122):gigabitEthernetESP(123):tenGbE-SR(124):tenGbE-ER(125):tenGbE-LR(126):gigabitEthernetT-sfp(127):fastEtherGEN(128):gigabitEthernetGEN(129):tenGbE-GEN(130):fastEtherBX-D(131):fastEtherBX-U(132):gigabitEthernetBX-D(133):gigabitEthernetBX-U(134):tenGbE-LRM(135):sFP-PLUS-SR(136):sFP-PLUS-LR(137):sFP-PLUS-LRM(138):sFP-PLUS-DAC(139):sFP-PLUS-DA1(140):sFP-PLUS-DA2(141):sFP-PLUS-DA3(142):sFP-PLUS-DA5(143):sFP-PLUS-DA7(144):sFP-PLUS-DA10(145):sFP-PLUS-DA15(146):sFP-PLUS-DA20(147):tenGbE-T(148):tenGbE-TSH(149):tenGbE-TLH(150):tenGbE-STK(151):xFP-SFP-PLUS-DAC(152):xFP-SFP-PLUS-DA1(153):xFP-SFP-PLUS-DA3(154):xFP-SFP-PLUS-DA5(155):xFP-SFP-PLUS-DA7(156):xFP-SFP-PLUS-DA10(157):tenGbE-K(158):sFP-PLUS-ER(160):sFP-CWDM1470(161):sFP-CWDM1490(162):sFP-CWDM1510(163):sFP-CWDM1530(164):sFP-CWDM1550(165):sFP-CWDM1570(166):sFP-CWDM1590(167):sFP-CWDM1610(168):tenGigabitEthernetESP(169):fourGbE-GEN(170):fortyGbE-GEN(171):qSFP-PLUS-SR4(172):qSFP-PLUS-eSR4(173):qSFP-PLUS-LR4(174):qSFP-PLUS-DA1(175):qSFP-PLUS-DA3(176):qSFP-PLUS-DA5(177):qSFP-PLUS-SPLIT-sFP-PLUS-DA1(178):qSFP-PLUS-SPLIT-sFP-PLUS-DA3(179):qSFP-PLUS-SPLIT-sFP-PLUS-DA5(180):sFP-PLUS-AO1(181):sFP-PLUS-AO2(182):sFP-PLUS-AO3(183):sFP-PLUS-AO5(184):sFP-PLUS-AO7(185):sFP-PLUS-AO10(186):sFP-PLUS-AO15(187):qSFP-PLUS-AO1(188):qSFP-PLUS-AO2(189):qSFP-PLUS-AO3(190):qSFP-PLUS-AO5(191):qSFP-PLUS-AO7(192):qSFP-PLUS-AO10(193):qSFP-PLUS-AO15(194):qSFP-PLUS-AO20(195):qSFP-PLUS-SPLIT-sFP-PLUS-AO1(196):qSFP-PLUS-SPLIT-sFP-PLUS-AO2(197):qSFP-PLUS-SPLIT-sFP-PLUS-AO3(198):qSFP-PLUS-SPLIT-sFP-PLUS-AO5(199):qSFP-PLUS-SPLIT-sFP-PLUS-AO7(200):qSFP-PLUS-SPLIT-sFP-PLUS-AO10(201):qSFP-PLUS-SPLIT-sFP-PLUS-AO15(202),The type of port.
.1.3.6.1.4.1.11.2.14.11.5.1.7.1.14.2.1.3,CONFIG-MIB::hpSwitchStpPortSrcMac,OCTET,read-only,,mandatory,,The source MAC address used by the spanning tree protocol.
.1.3.6.1.4.1.11.2.14.11.5.1.7.1.14.2.1.4,CONFIG-MIB::hpSwitchStpPortPriority,INTEGER,read-write,,mandatory,,The value of the priority field which is contained in the first (in network byte order) octet of the (2 octet long) Port ID. The other octet of the Port ID is given by the value of dot1dStpPort.
.1.3.6.1.4.1.11.2.14.11.5.1.7.1.14.2.1.5,CONFIG-MIB::hpSwitchStpPortPathCost,INTEGER,read-write,,mandatory,,The contribution of this port to the path cost of paths towards the spanning tree root which include this port. 802.1D-1990 recommends that the default value of this parameter be in inverse proportion to the speed of the attached LAN.
.1.3.6.1.4.1.11.2.14.11.5.1.7.1.14.2.1.6,CONFIG-MIB::hpSwitchStpPortMode,INTEGER,read-write,,mandatory,normal(1):fast(2):uplink(3),If the value of this variable is set to fast(2), the  port will go directly into the Forwarding State when a device is connected to it. Use this feature only on ports that are connected to an individual PC or Workstation, to allow these ports to come up and move quickly to the Forwarding State instead of going through the normal STP initialization process. Caution: Changing the value of this variable to fast(2) on ports connected to a hub or switch may cause loops in your network.
.1.3.6.1.4.1.11.2.14.11.5.1.7.1.14.2.1.7,CONFIG-MIB::hpSwitchStpPortBpduFilter,INTEGER,read-write,,optional,true(1):false(2),Setting True will cause port to ignore ingress BPDUs and not generate egress BPDUs, as the result the port  will stay in forwarding state. Default is False.
.1.3.6.1.4.1.11.2.14.11.5.1.7.1.14.2.1.8,CONFIG-MIB::hpSwitchStpPortBpduProtection,INTEGER,read-write,,optional,true(1):false(2),Setting True indicates that no BPDUs are expected to  be received on this port. At the reception of BPDUs  the BPDU protection mechanism will disable this port and port will transition into bpduError state. Default is False.
.1.3.6.1.4.1.11.2.14.11.5.1.7.1.14.2.1.9,CONFIG-MIB::hpSwitchStpPortErrantBpduCounter,Counter32,read-only,,optional,,Counts the number of BPDUs that were not expected  to be received on this port. This counter gets  incremented only if hpSwitchStpPortBpduProtection, hpSwitchStpPortBpduFilter, hpSwitchStpPortPvstFilter, or hpSwitchStpPvstProtection is True for the port,  otherwise it is cleared to zero.
.1.3.6.1.4.1.11.2.14.11.5.1.7.1.14.2.1.10,CONFIG-MIB::hpSwitchStpPortPvstFilter,INTEGER,read-write,,optional,true(1):false(2),Setting True will cause the port to ignore incoming PVST BPDUs. Default is False.
.1.3.6.1.4.1.11.2.14.11.5.1.7.1.14.2.1.11,CONFIG-MIB::hpSwitchStpPortPvstProtection,INTEGER,read-write,,optional,true(1):false(2),Setting True indicates that any PVST BPDUs arriving on this port should be discarded and that this will cause the port to be disabled. The port will remain disabled for the time period indicated by hpSwitchStpBpduProtectionTimeout. Default is False.
.1.3.6.1.4.1.11.2.14.11.5.1.7.1.14.3,CONFIG-MIB::hpSwitchStpTrapCntl,BITS,read-write,,optional,errantBpdu(0):newRoot(1):rootGuard(2):loopGuard(3),Controls generation of SNMP traps by STP-enabled switch for events defined in this MIB. The set bit means 'enabled'. - errantBpdu(0) The state of this bit specifies whether the  notification trap allowed to be send when  unexpected (errant) BPDU is received on a port. - newRoot(1): The state of this bit specifies whether the  trap is allowed to be send when  sending agent has become the new root.  Currently, it is only supported in RPVST mode. - rootGuard(2):  The state of this bit specifies whether the  trap is allowed to be send when Root-Guard enabled port receives superior BPDUs  on its interface. Currently, it is only supported in RPVST mode. - loopGuard(3): The state of this bit specifies whether the trap  is allowed to be send when a Loop Guard  enabled port stops receiving BPDUs from its  designated port. Currently, it is only supported in RPVST mode.
.1.3.6.1.4.1.11.2.14.11.5.1.7.1.14.4,CONFIG-MIB::hpSwitchStpBpduProtectionTimeout,INTEGER,read-write,,optional,,The duration of time in seconds when a protected port affected by receiving of an unauthorized BPDU will  remain in down state. The zero value means infinity.
.1.3.6.1.4.1.11.2.14.11.5.1.7.1.14.5,CONFIG-MIB::hpSwitchSTPAdminStatus,INTEGER,read-write,,mandatory,enabled(1):disabled(2),The administrative status of STP in the switch. The value 'enabled' denotes that the STP is active; 'disabled' disables it.  
.1.3.6.1.4.1.11.2.14.11.5.1.7.1.14.6,CONFIG-MIB::hpicfSwitchSTPVersion,INTEGER,read-write,,mandatory,mstp(3):rapidPvst(4),The version of Spanning Tree Protocol the bridge is currently running. 
.1.3.6.1.4.1.11.2.14.11.5.1.7.1.15,CONFIG-MIB::hpSwitchIgmpConfig,,,,,,
.1.3.6.1.4.1.11.2.14.11.5.1.7.1.15.1,CONFIG-MIB::hpSwitchIgmpConfigTable,,not-accessible,,mandatory,,A table that contains information about the IGMP Querier capacity or High Priority Forward configuration on any given vlan on the switch.
.1.3.6.1.4.1.11.2.14.11.5.1.7.1.15.1.1,CONFIG-MIB::hpSwitchIgmpConfigEntry,,not-accessible,hpSwitchIgmpVlanIndex,mandatory,,Information about the IGMP Querier feature associated with a specific virtual LAN in this device.
.1.3.6.1.4.1.11.2.14.11.5.1.7.1.15.1.1.1,CONFIG-MIB::hpSwitchIgmpVlanIndex,Integer32,read-only,,mandatory,,An index that uniquely identifies the IGMP configuration of a virtual LAN for which this entry contains information.
.1.3.6.1.4.1.11.2.14.11.5.1.7.1.15.1.1.2,CONFIG-MIB::hpSwitchIgmpState,INTEGER,read-write,,mandatory,enable(1):disable(2),The operational status of the IGMP support for this virtual LAN.
.1.3.6.1.4.1.11.2.14.11.5.1.7.1.15.1.1.3,CONFIG-MIB::hpSwitchIgmpQuerierState,INTEGER,read-write,,mandatory,enable(1):disable(2),The operational status of the IGMP Querier functionality for this virtual LAN.
.1.3.6.1.4.1.11.2.14.11.5.1.7.1.15.1.1.4,CONFIG-MIB::hpSwitchIgmpPriorityState,INTEGER,read-write,,deprecated,enable(1):disable(2),The operational status of the IGMP Forward with High Priority mode for this virtual LAN. This feature is now  deprecated since the functionality is not supported by  IGMP.
.1.3.6.1.4.1.11.2.14.11.5.1.7.1.15.1.1.5,CONFIG-MIB::hpSwitchIgmpQuerierInterval,INTEGER,read-write,,mandatory,,The time (in seconds) to wait between Querier election cycles for this virtual LAN.
.1.3.6.1.4.1.11.2.14.11.5.1.7.1.15.1.1.6,CONFIG-MIB::hpSwitchIgmpProxyDomainMap,INTEGER,read-write,,mandatory,,Denotes the IGMP proxy domains that are associated with this VLAN. Only IGMP proxy domains that already exist  can be associated.
.1.3.6.1.4.1.11.2.14.11.5.1.7.1.15.2,CONFIG-MIB::hpSwitchIgmpPortConfigTable,,not-accessible,,mandatory,,A table that contains information about the IGMP port configurations on this switch.
.1.3.6.1.4.1.11.2.14.11.5.1.7.1.15.2.1,CONFIG-MIB::hpSwitchIgmpPortConfigEntry,,not-accessible,hpSwitchIgmpPortIndex,mandatory,,The information associated with each IGMP port configuration.
.1.3.6.1.4.1.11.2.14.11.5.1.7.1.15.2.1.1,CONFIG-MIB::hpSwitchIgmpPortIndex,INTEGER,read-only,,mandatory,,The ifIndex value which uniquely identifies a row in the Interfaces Table.
.1.3.6.1.4.1.11.2.14.11.5.1.7.1.15.2.1.2,CONFIG-MIB::hpSwitchIgmpPortType,INTEGER,read-only,,mandatory,other(1):none(2):unknown(3):ethernetCsmacd(6):iso88023Csmacd(7):fddi(15):atm(37):propMultiplexor(54):ieee80212(55):fastEther(62):fastEtherFX(69):fastEtherFX-sfp(70):tenGSFP-SR(112):tenGSFP-LR(113):tenGSFP-ER(114):tenGSFP-LRM(115):tenGSFP-LX4(116):gigabitEthernetSX(117):gigabitEthernetLX(118):gigabitEthernetT(119):gigabitEthernetStk(120):gigabitEthernetLH(121):tenGbE-CX4(122):gigabitEthernetESP(123):tenGbE-SR(124):tenGbE-ER(125):tenGbE-LR(126):gigabitEthernetT-sfp(127):fastEtherGEN(128):gigabitEthernetGEN(129):tenGbE-GEN(130):fastEtherBX-D(131):fastEtherBX-U(132):gigabitEthernetBX-D(133):gigabitEthernetBX-U(134):tenGbE-LRM(135):sFP-PLUS-SR(136):sFP-PLUS-LR(137):sFP-PLUS-LRM(138):sFP-PLUS-DAC(139):sFP-PLUS-DA1(140):sFP-PLUS-DA2(141):sFP-PLUS-DA3(142):sFP-PLUS-DA5(143):sFP-PLUS-DA7(144):sFP-PLUS-DA10(145):sFP-PLUS-DA15(146):sFP-PLUS-DA20(147):tenGbE-T(148):tenGbE-TSH(149):tenGbE-TLH(150):tenGbE-STK(151):xFP-SFP-PLUS-DAC(152):xFP-SFP-PLUS-DA1(153):xFP-SFP-PLUS-DA3(154):xFP-SFP-PLUS-DA5(155):xFP-SFP-PLUS-DA7(156):xFP-SFP-PLUS-DA10(157):tenGbE-K(158):sFP-PLUS-ER(160):sFP-CWDM1470(161):sFP-CWDM1490(162):sFP-CWDM1510(163):sFP-CWDM1530(164):sFP-CWDM1550(165):sFP-CWDM1570(166):sFP-CWDM1590(167):sFP-CWDM1610(168):tenGigabitEthernetESP(169):fourGbE-GEN(170):fortyGbE-GEN(171):qSFP-PLUS-SR4(172):qSFP-PLUS-eSR4(173):qSFP-PLUS-LR4(174):qSFP-PLUS-DA1(175):qSFP-PLUS-DA3(176):qSFP-PLUS-DA5(177):qSFP-PLUS-SPLIT-sFP-PLUS-DA1(178):qSFP-PLUS-SPLIT-sFP-PLUS-DA3(179):qSFP-PLUS-SPLIT-sFP-PLUS-DA5(180):sFP-PLUS-AO1(181):sFP-PLUS-AO2(182):sFP-PLUS-AO3(183):sFP-PLUS-AO5(184):sFP-PLUS-AO7(185):sFP-PLUS-AO10(186):sFP-PLUS-AO15(187):qSFP-PLUS-AO1(188):qSFP-PLUS-AO2(189):qSFP-PLUS-AO3(190):qSFP-PLUS-AO5(191):qSFP-PLUS-AO7(192):qSFP-PLUS-AO10(193):qSFP-PLUS-AO15(194):qSFP-PLUS-AO20(195):qSFP-PLUS-SPLIT-sFP-PLUS-AO1(196):qSFP-PLUS-SPLIT-sFP-PLUS-AO2(197):qSFP-PLUS-SPLIT-sFP-PLUS-AO3(198):qSFP-PLUS-SPLIT-sFP-PLUS-AO5(199):qSFP-PLUS-SPLIT-sFP-PLUS-AO7(200):qSFP-PLUS-SPLIT-sFP-PLUS-AO10(201):qSFP-PLUS-SPLIT-sFP-PLUS-AO15(202),The type of port.
.1.3.6.1.4.1.11.2.14.11.5.1.7.1.15.2.1.3,CONFIG-MIB::hpSwitchIgmpIpMcastState,INTEGER,read-write,,mandatory,auto(1):blocked(2):forward(3),The operational status of the IGMP feature for this port or trunk. 1 implies that all IP Multicast traffic will be monitored on the port, 2 implies that IP Multicast traffic will be dropped on the port, and 3 implies that all IP Multicast traffic will be forwarded without the switch examining it.
.1.3.6.1.4.1.11.2.14.11.5.1.7.1.15.3,CONFIG-MIB::hpSwitchIgmpPortConfigTable2,,not-accessible,,mandatory,,A table that contains information about the IGMP port configurations on this switch. This table supersedes hpSwitchIgmpPortConfigTable for products which support multiple VLANs on each port.
.1.3.6.1.4.1.11.2.14.11.5.1.7.1.15.3.1,CONFIG-MIB::hpSwitchIgmpPortConfigEntry2,,not-accessible,hpSwitchIgmpPortVlanIndex2:hpSwitchIgmpPortIndex2,mandatory,,The information associated with each IGMP port configuration.
.1.3.6.1.4.1.11.2.14.11.5.1.7.1.15.3.1.1,CONFIG-MIB::hpSwitchIgmpPortVlanIndex2,INTEGER,read-only,,mandatory,,The Vlan Index value which uniquely identifies a row in the Interfaces Table.
.1.3.6.1.4.1.11.2.14.11.5.1.7.1.15.3.1.2,CONFIG-MIB::hpSwitchIgmpPortIndex2,INTEGER,read-only,,mandatory,,The ifIndex value which uniquely identifies a row in the Interfaces Table.
.1.3.6.1.4.1.11.2.14.11.5.1.7.1.15.3.1.3,CONFIG-MIB::hpSwitchIgmpPortType2,INTEGER,read-only,,mandatory,other(1):none(2):unknown(3):ethernetCsmacd(6):iso88023Csmacd(7):fddi(15):atm(37):propMultiplexor(54):ieee80212(55):fastEther(62):fastEtherFX(69):fastEtherFX-sfp(70):tenGSFP-SR(112):tenGSFP-LR(113):tenGSFP-ER(114):tenGSFP-LRM(115):tenGSFP-LX4(116):gigabitEthernetSX(117):gigabitEthernetLX(118):gigabitEthernetT(119):gigabitEthernetStk(120):gigabitEthernetLH(121):tenGbE-CX4(122):gigabitEthernetESP(123):tenGbE-SR(124):tenGbE-ER(125):tenGbE-LR(126):gigabitEthernetT-sfp(127):fastEtherGEN(128):gigabitEthernetGEN(129):tenGbE-GEN(130):fastEtherBX-D(131):fastEtherBX-U(132):gigabitEthernetBX-D(133):gigabitEthernetBX-U(134):tenGbE-LRM(135):sFP-PLUS-SR(136):sFP-PLUS-LR(137):sFP-PLUS-LRM(138):sFP-PLUS-DAC(139):sFP-PLUS-DA1(140):sFP-PLUS-DA2(141):sFP-PLUS-DA3(142):sFP-PLUS-DA5(143):sFP-PLUS-DA7(144):sFP-PLUS-DA10(145):sFP-PLUS-DA15(146):sFP-PLUS-DA20(147):tenGbE-T(148):tenGbE-TSH(149):tenGbE-TLH(150):tenGbE-STK(151):xFP-SFP-PLUS-DAC(152):xFP-SFP-PLUS-DA1(153):xFP-SFP-PLUS-DA3(154):xFP-SFP-PLUS-DA5(155):xFP-SFP-PLUS-DA7(156):xFP-SFP-PLUS-DA10(157):tenGbE-K(158):sFP-PLUS-ER(160):sFP-CWDM1470(161):sFP-CWDM1490(162):sFP-CWDM1510(163):sFP-CWDM1530(164):sFP-CWDM1550(165):sFP-CWDM1570(166):sFP-CWDM1590(167):sFP-CWDM1610(168):tenGigabitEthernetESP(169):fourGbE-GEN(170):fortyGbE-GEN(171):qSFP-PLUS-SR4(172):qSFP-PLUS-eSR4(173):qSFP-PLUS-LR4(174):qSFP-PLUS-DA1(175):qSFP-PLUS-DA3(176):qSFP-PLUS-DA5(177):qSFP-PLUS-SPLIT-sFP-PLUS-DA1(178):qSFP-PLUS-SPLIT-sFP-PLUS-DA3(179):qSFP-PLUS-SPLIT-sFP-PLUS-DA5(180):sFP-PLUS-AO1(181):sFP-PLUS-AO2(182):sFP-PLUS-AO3(183):sFP-PLUS-AO5(184):sFP-PLUS-AO7(185):sFP-PLUS-AO10(186):sFP-PLUS-AO15(187):qSFP-PLUS-AO1(188):qSFP-PLUS-AO2(189):qSFP-PLUS-AO3(190):qSFP-PLUS-AO5(191):qSFP-PLUS-AO7(192):qSFP-PLUS-AO10(193):qSFP-PLUS-AO15(194):qSFP-PLUS-AO20(195):qSFP-PLUS-SPLIT-sFP-PLUS-AO1(196):qSFP-PLUS-SPLIT-sFP-PLUS-AO2(197):qSFP-PLUS-SPLIT-sFP-PLUS-AO3(198):qSFP-PLUS-SPLIT-sFP-PLUS-AO5(199):qSFP-PLUS-SPLIT-sFP-PLUS-AO7(200):qSFP-PLUS-SPLIT-sFP-PLUS-AO10(201):qSFP-PLUS-SPLIT-sFP-PLUS-AO15(202),The type of port.
.1.3.6.1.4.1.11.2.14.11.5.1.7.1.15.3.1.4,CONFIG-MIB::hpSwitchIgmpIpMcastState2,INTEGER,read-write,,mandatory,auto(1):blocked(2):forward(3),The operational status of the IGMP feature for this port or trunk. 1 implies that all IP Multicast traffic will be monitored on the port, 2 implies that IP Multicast traffic will be dropped on the port, and 3 implies that all IP Multicast traffic will be forwarded without the switch examining it.
.1.3.6.1.4.1.11.2.14.11.5.1.7.1.15.3.1.5,CONFIG-MIB::hpSwitchIgmpPortForcedLeaveState,INTEGER,read-write,,mandatory,enabled(1):disabled(2),The operational status of the IGMP feature for this port or trunk indicates whether any IGMP V2 Leaves received for an IP Multicast group will cause the group to be deleted after the hpSwitchIgmpForcedLeaveInterval if no new IGMP V2 Reports are received for that group. Normal behavior is for a group issuing a Leave to be deleted after the Querier's Maximum Response time if no IGMP V2  Report is received.
.1.3.6.1.4.1.11.2.14.11.5.1.7.1.15.3.1.6,CONFIG-MIB::hpSwitchIgmpPortFastLeaveState,INTEGER,read-write,,mandatory,enabled(1):disabled(2),The operational status of the IGMP feature for this port or trunk indicates whether any IGMP V2 Leaves received for an IP Multicast group will cause the group to be deleted immediately on single- received.
.1.3.6.1.4.1.11.2.14.11.5.1.7.1.15.4,CONFIG-MIB::hpSwitchIgmpForcedLeaveInterval,INTEGER,read-write,,mandatory,,When a port's hpSwitchIgmpPortForcedLeaveState is enabled, this is the amount of time allowed for an IGMP V2 Report to arrive and cancel deletion of a multicast group requested by a previous IGMP V2 Leave request.
.1.3.6.1.4.1.11.2.14.11.5.1.7.1.15.5,HP-SWITCH-BASIC-CONFIG-MIB::hpSwitchIgmpProxyDomainConfigTable,,not-accessible,,current,,A table that contains information about the IGMP proxy domain configurations on this switch.
.1.3.6.1.4.1.11.2.14.11.5.1.7.1.15.5.1,HP-SWITCH-BASIC-CONFIG-MIB::hpSwitchIgmpProxyDomainConfigEntry,,not-accessible,hpSwitchIgmpProxyDomainId,current,,The information associated with each IGMP proxy domain configuration.
.1.3.6.1.4.1.11.2.14.11.5.1.7.1.15.5.1.1,HP-SWITCH-BASIC-CONFIG-MIB::hpSwitchIgmpProxyDomainId,Integer32,not-accessible,,current,,The domain id that uniquely identifies a row  in the IGMP proxy domain configuration table.
.1.3.6.1.4.1.11.2.14.11.5.1.7.1.15.5.1.2,HP-SWITCH-BASIC-CONFIG-MIB::hpSwitchIgmpProxyDomainStatus,INTEGER,read-create,,current,active(1):notInService(2):notReady(3):createAndGo(4):createAndWait(5):destroy(6),The status of a IGMP proxy domain configuration entry. Allows creation/deletion of the  IGMP proxy domain entry. Row cannot be deleted if the IGMP proxy domain is associated with a VLAN.
.1.3.6.1.4.1.11.2.14.11.5.1.7.1.15.5.1.3,HP-SWITCH-BASIC-CONFIG-MIB::hpSwitchIgmpProxyDomainName,OCTET,read-create,,current,,The IGMP proxy domain name.
.1.3.6.1.4.1.11.2.14.11.5.1.7.1.15.5.1.4,HP-SWITCH-BASIC-CONFIG-MIB::hpSwitchIgmpProxyDomainIp,IpAddress,read-create,,current,,The IGMP proxy domain IP.
.1.3.6.1.4.1.11.2.14.11.5.1.7.1.15.5.1.5,HP-SWITCH-BASIC-CONFIG-MIB::hpSwitchIgmpProxyMcastLowerIp,IpAddress,read-create,,current,,The IGMP proxy domain's lower multicast IP.
.1.3.6.1.4.1.11.2.14.11.5.1.7.1.15.5.1.6,HP-SWITCH-BASIC-CONFIG-MIB::hpSwitchIgmpProxyMcastUpperIp,IpAddress,read-create,,current,,The IGMP proxy domain's upper multicast IP.
.1.3.6.1.4.1.11.2.14.11.5.1.7.1.17,CONFIG-MIB::hpSwitchCosConfig,,,,,,
.1.3.6.1.4.1.11.2.14.11.5.1.7.1.17.1,CONFIG-MIB::hpSwitchCosPortConfigTable,,not-accessible,,mandatory,,A table that contains information about the CoS port configurations on this switch.
.1.3.6.1.4.1.11.2.14.11.5.1.7.1.17.1.1,CONFIG-MIB::hpSwitchCosPortConfigEntry,,not-accessible,hpSwitchCosPortIndex,mandatory,,The information associated with each CoS port configuration.
.1.3.6.1.4.1.11.2.14.11.5.1.7.1.17.1.1.1,CONFIG-MIB::hpSwitchCosPortIndex,INTEGER,read-only,,mandatory,,The ifIndex value which uniquely identifies a row in the Interfaces Table.
.1.3.6.1.4.1.11.2.14.11.5.1.7.1.17.1.1.2,CONFIG-MIB::hpSwitchCosPortType,INTEGER,read-only,,deprecated,other(1):none(2):unknown(3):ethernetCsmacd(6):iso88023Csmacd(7):fddi(15):atm(37):propMultiplexor(54):ieee80212(55):fastEther(62):fastEtherFX(69):fastEtherFX-sfp(70):tenGSFP-SR(112):tenGSFP-LR(113):tenGSFP-ER(114):tenGSFP-LRM(115):tenGSFP-LX4(116):gigabitEthernetSX(117):gigabitEthernetLX(118):gigabitEthernetT(119):gigabitEthernetStk(120):gigabitEthernetLH(121):tenGbE-CX4(122):gigabitEthernetESP(123):tenGbE-SR(124):tenGbE-ER(125):tenGbE-LR(126):gigabitEthernetT-sfp(127):fastEtherGEN(128):gigabitEthernetGEN(129):tenGbE-GEN(130):fastEtherBX-D(131):fastEtherBX-U(132):gigabitEthernetBX-D(133):gigabitEthernetBX-U(134):tenGbE-LRM(135):sFP-PLUS-SR(136):sFP-PLUS-LR(137):sFP-PLUS-LRM(138):sFP-PLUS-DAC(139):sFP-PLUS-DA1(140):sFP-PLUS-DA2(141):sFP-PLUS-DA3(142):sFP-PLUS-DA5(143):sFP-PLUS-DA7(144):sFP-PLUS-DA10(145):sFP-PLUS-DA15(146):sFP-PLUS-DA20(147):tenGbE-T(148):tenGbE-TSH(149):tenGbE-TLH(150):tenGbE-STK(151):xFP-SFP-PLUS-DAC(152):xFP-SFP-PLUS-DA1(153):xFP-SFP-PLUS-DA3(154):xFP-SFP-PLUS-DA5(155):xFP-SFP-PLUS-DA7(156):xFP-SFP-PLUS-DA10(157):tenGbE-K(158):sFP-PLUS-ER(160):sFP-CWDM1470(161):sFP-CWDM1490(162):sFP-CWDM1510(163):sFP-CWDM1530(164):sFP-CWDM1550(165):sFP-CWDM1570(166):sFP-CWDM1590(167):sFP-CWDM1610(168):tenGigabitEthernetESP(169):fourGbE-GEN(170):fortyGbE-GEN(171):qSFP-PLUS-SR4(172):qSFP-PLUS-eSR4(173):qSFP-PLUS-LR4(174):qSFP-PLUS-DA1(175):qSFP-PLUS-DA3(176):qSFP-PLUS-DA5(177):qSFP-PLUS-SPLIT-sFP-PLUS-DA1(178):qSFP-PLUS-SPLIT-sFP-PLUS-DA3(179):qSFP-PLUS-SPLIT-sFP-PLUS-DA5(180):sFP-PLUS-AO1(181):sFP-PLUS-AO2(182):sFP-PLUS-AO3(183):sFP-PLUS-AO5(184):sFP-PLUS-AO7(185):sFP-PLUS-AO10(186):sFP-PLUS-AO15(187):qSFP-PLUS-AO1(188):qSFP-PLUS-AO2(189):qSFP-PLUS-AO3(190):qSFP-PLUS-AO5(191):qSFP-PLUS-AO7(192):qSFP-PLUS-AO10(193):qSFP-PLUS-AO15(194):qSFP-PLUS-AO20(195):qSFP-PLUS-SPLIT-sFP-PLUS-AO1(196):qSFP-PLUS-SPLIT-sFP-PLUS-AO2(197):qSFP-PLUS-SPLIT-sFP-PLUS-AO3(198):qSFP-PLUS-SPLIT-sFP-PLUS-AO5(199):qSFP-PLUS-SPLIT-sFP-PLUS-AO7(200):qSFP-PLUS-SPLIT-sFP-PLUS-AO10(201):qSFP-PLUS-SPLIT-sFP-PLUS-AO15(202),The type of port.
.1.3.6.1.4.1.11.2.14.11.5.1.7.1.17.1.1.3,CONFIG-MIB::hpSwitchCosPortPriority,INTEGER,read-write,,mandatory,,The 802.1p priority value to assign to packets received on the specified port. This value will be inserted in the 802.1Q tag and the packet will be placed in the appropriate outbound port queue. The value of 255 is used to indicate No Override.
.1.3.6.1.4.1.11.2.14.11.5.1.7.1.17.1.1.4,CONFIG-MIB::hpSwitchCosPortDSCPPolicy,INTEGER,read-write,,mandatory,,The DSCP Policy to assign to packets received on the specified Port. This is an index into the hpSwitchCosDSCPPolicy table, or the value 255 associated with an 802.1p priority value, which will be inserted in the 802.1Q tag and will cause the  packet to be placed in the appropriate outbound port queue. When the packet is IP protocol type, the DSCP policy value (a Differentiated Services codepoint) will also be written into the Differentiated-Services field of the IP Type-of-Service byte.
.1.3.6.1.4.1.11.2.14.11.5.1.7.1.17.1.1.5,CONFIG-MIB::hpSwitchCosPortResolvedPriority,INTEGER,read-only,,mandatory,,The 802.1p priority that will be applied to packets received on the specified port. This value represents the actual operating value for this CoS port entry. A value of 255 represents no override of the incoming priority.
.1.3.6.1.4.1.11.2.14.11.5.1.7.1.17.1.1.6,CONFIG-MIB::hpSwitchCosPortApplyPolicy,INTEGER,read-write,,mandatory,noPolicyOverride(1):applyHpSwitchCosPortPriority(2):applyHpSwitchCosPortDSCPPolicy(3),This object determines which configuration policy, noPolicyOverride, hpSwitchCosPortPriority or  hpSwitchCosPortDSCPPolicy, applies for the given Port CoS entry. These configuration policies are mutually exclusive of one another.
.1.3.6.1.4.1.11.2.14.11.5.1.7.1.17.1.1.7,CONFIG-MIB::hpSwitchCosPortTrustMode,INTEGER,read-write,,mandatory,trustNone(1):trust8021pCos(2):trustTosIpPrecedence(3):trustTosDiffserv(4):trustAll(5):trustPartnerDevice(6),This object determines which trust mode, trustNone, trust802.1pCos, trustTosIpPrecedence,  trustTosDffserv, trustAll or trustPartnerDevice  than trustNone, the inbound QoS values for the trusted  fields will be preserved and any associated inbound  queuing will occur. For all configurations, any  inbound values NOT specifically included in the  trust-mode will be cleared. The default setting is trustAll. These configuration modes are mutually  exclusive of one another.
.1.3.6.1.4.1.11.2.14.11.5.1.7.1.17.1.1.8,CONFIG-MIB::hpSwitchCosPortPartnerDevice,BITS,read-write,,mandatory,reserved(0):none(1):arubaAccessPoint(2):arubaBridgeRouter(3):hpBridgeRouter(4):ciscoBridgeRouter(5):ciscoPhone(6),This object lists the device-types for which DSCP priority is trusted when hpSwitchCosPortTrustMode is set to trustPartnerDevice.
.1.3.6.1.4.1.11.2.14.11.5.1.7.1.17.1.1.9,CONFIG-MIB::hpSwitchCosPortTrustedPartnerState,INTEGER,read-only,,mandatory,untrusted(1):trusted(2),This object is set to 'trusted' when an approved device is detected. The default value is 'untrusted'.
.1.3.6.1.4.1.11.2.14.11.5.1.7.1.17.2,CONFIG-MIB::hpSwitchCosVlanConfigTable,,not-accessible,,mandatory,,A table that contains information about the CoS Vlan configurations on this switch.
.1.3.6.1.4.1.11.2.14.11.5.1.7.1.17.2.1,CONFIG-MIB::hpSwitchCosVlanConfigEntry,,not-accessible,hpSwitchCosVlanIndex,mandatory,,The information associated with each CoS Vlan configuration.
.1.3.6.1.4.1.11.2.14.11.5.1.7.1.17.2.1.1,CONFIG-MIB::hpSwitchCosVlanIndex,Integer32,read-only,,mandatory,,The index that uniquely identifies the CoS configuration of a virtual LAN for which this entry contains information.
.1.3.6.1.4.1.11.2.14.11.5.1.7.1.17.2.1.2,CONFIG-MIB::hpSwitchCosVlanPriority,INTEGER,read-write,,mandatory,,The 802.1p priority value to assign to packets received on the specified Vlan. This value will be inserted in the 802.1Q tag and the packet will be placed in the appropriate outbound port queue. The value of 255 is used to indicate No Override.
.1.3.6.1.4.1.11.2.14.11.5.1.7.1.17.2.1.3,CONFIG-MIB::hpSwitchCosVlanDSCPPolicy,INTEGER,read-write,,mandatory,,The DSCP Policy to assign to packets received on the specified Vlan. This is an index into the hpSwitchCosDSCPPolicy table, or the value 255 indicating no DSCP Policy exists. This policy is associated with an 802.1p priority value, which will be inserted in the 802.1Q tag and will cause the packet to be placed in the appropriate outbound port queue. When the packet is IP protocol type, the DSCP policy value (a Differentiated Services codepoint) will also be written into the Differentiated-Services field of the IP Type-of-Service byte.
.1.3.6.1.4.1.11.2.14.11.5.1.7.1.17.2.1.4,CONFIG-MIB::hpSwitchCosVlanResolvedPriority,INTEGER,read-only,,mandatory,,The 802.1p priority that will be applied to packets received on the specified VLAN. This value represents the actual operating value for this CoS vlan entry. A value of 255 represents no override of the incoming priority .
.1.3.6.1.4.1.11.2.14.11.5.1.7.1.17.2.1.5,CONFIG-MIB::hpSwitchCosVlanApplyPolicy,INTEGER,read-write,,mandatory,noPolicyOverride(1):applyHpSwitchCosVlanPriority(2):applyHpSwitchCosVlanDSCPPolicy(3),This object determines which configuration policy, noPolicyOverride, hpSwitchCosVlanPriority or  hpSwitchCosDSCPPolicy, applies for this given Vlan CoS entry. These configuration policies are mutually exclusive of one another.
.1.3.6.1.4.1.11.2.14.11.5.1.7.1.17.3,CONFIG-MIB::hpSwitchCosProtocolConfigTable,,not-accessible,,mandatory,,A table that contains information about the CoS protocol type configurations on this switch.
.1.3.6.1.4.1.11.2.14.11.5.1.7.1.17.3.1,CONFIG-MIB::hpSwitchCosProtocolConfigEntry,,not-accessible,hpSwitchCosProtocolType,mandatory,,The information associated with each CoS protocol configuration.
.1.3.6.1.4.1.11.2.14.11.5.1.7.1.17.3.1.1,CONFIG-MIB::hpSwitchCosProtocolType,INTEGER,read-only,,mandatory,ip(1):ipx(2):arp(3):decnet(4):appletalk(5):sna(6):netbios(7),Packets with this protocol type will receive the new priority value.
.1.3.6.1.4.1.11.2.14.11.5.1.7.1.17.3.1.2,CONFIG-MIB::hpSwitchCosProtocolPriority,INTEGER,read-write,,mandatory,,The 802.1p priority value to assign to packets received for the specified protocol. This value will be inserted in the 802.1Q tag and the packet will be placed in the appropriate outbound port queue. The value of 255 is used to indicate No Override.
.1.3.6.1.4.1.11.2.14.11.5.1.7.1.17.4,CONFIG-MIB::hpSwitchCosAddressConfigTable,,not-accessible,,mandatory,,A table that contains information about the CoS address configurations on this switch.
.1.3.6.1.4.1.11.2.14.11.5.1.7.1.17.4.1,CONFIG-MIB::hpSwitchCosAddressConfigEntry,,not-accessible,hpSwitchCosAddressIndex,mandatory,,The information associated with each CoS address configuration.
.1.3.6.1.4.1.11.2.14.11.5.1.7.1.17.4.1.1,CONFIG-MIB::hpSwitchCosAddressIndex,INTEGER,read-only,,mandatory,,The index that uniquely identifies the CoS configuration for an address for which this entry contains information.
.1.3.6.1.4.1.11.2.14.11.5.1.7.1.17.4.1.2,CONFIG-MIB::hpSwitchCosAddressType,INTEGER,read-write,,mandatory,ip(1):ipv6(2),The type of address to configure. Default is ip  (IPv4). This field indicates which of the other address fields must be configured for this table  entry. 
.1.3.6.1.4.1.11.2.14.11.5.1.7.1.17.4.1.3,CONFIG-MIB::hpSwitchCosAddressIp,IpAddress,read-write,,mandatory,,This variable is valid only if an IPv4 CoS configuration was defined. It will be ignored otherwise. Packets with this IPv4 address as a source or destination will receive the new priority value.
.1.3.6.1.4.1.11.2.14.11.5.1.7.1.17.4.1.4,CONFIG-MIB::hpSwitchCosAddressPriority,INTEGER,read-write,,mandatory,,The 802.1p priority value to assign to packets received for the specified address. This value will be inserted in the 802.1Q tag and the packet will be placed in the appropriate outbound port queue.
.1.3.6.1.4.1.11.2.14.11.5.1.7.1.17.4.1.5,CONFIG-MIB::hpSwitchCosAddressStatus,INTEGER,read-write,,mandatory,active(1):notInService(2):notReady(3):createAndGo(4):createAndWait(5):destroy(6),The status of a Cos Address entry.
.1.3.6.1.4.1.11.2.14.11.5.1.7.1.17.4.1.6,CONFIG-MIB::hpSwitchCosAddressDSCPPolicy,INTEGER,read-write,,mandatory,,The DSCP Policy to assign to packets received for the specified address. This is an index into the hpSwitchCosDSCPPolicy table, or the value 255 indicating no DSCP Policy exists. This policy is associated with an 802.1p priority value, which will be inserted in the 802.1Q tag and will cause the packet to be placed in the appropriate outbound port queue. The DSCP policy value (a Differentiated Services codepoint) will also be written into the Differentiated-Services field of the IP Type-of-Service byte.
.1.3.6.1.4.1.11.2.14.11.5.1.7.1.17.4.1.7,CONFIG-MIB::hpSwitchCosAddressResolvedPriority,INTEGER,read-only,,mandatory,,The 802.1p priority that will be applied to packets received for the specified address. This value represents the actual operating value for this given address entry. A value of 255 represents no override.
.1.3.6.1.4.1.11.2.14.11.5.1.7.1.17.4.1.8,CONFIG-MIB::hpSwitchCosAddressApplyPolicy,INTEGER,read-write,,mandatory,applyHpSwitchCosAddressPriority(1):applyHpSwitchCosAddressDSCPPolicy(2),This object determines which configuration policy, hpSwitchCosAddressPriority or hpSwitchCosDSCPPolicy, applies for the given Address CoS entry. These configuration policies are mutually exclusive of one another.
.1.3.6.1.4.1.11.2.14.11.5.1.7.1.17.4.1.9,CONFIG-MIB::hpSwitchCosIpv4AddressMask,IpAddress,read-write,,mandatory,,This value is applied as a direct IPv4-address mask when an IPv4 CoS configuration is defined for this  table entry. It will be ignored otherwise. The  default mask value is 255.255.255.255, which  specifies the exact IPv4 address defined in  hpSwitchCosAddressIp (i.e., no subnet-masking is performed).
.1.3.6.1.4.1.11.2.14.11.5.1.7.1.17.4.1.10,CONFIG-MIB::hpSwitchCosAddressIpv6,OCTET,read-write,,mandatory,,This variable is valid only if an IPv6 CoS configuration was defined. It will be ignored otherwise. Packets with this IPv6 address as a source or destination will receive the new priority value.
.1.3.6.1.4.1.11.2.14.11.5.1.7.1.17.4.1.11,CONFIG-MIB::hpSwitchCosAddressIpv6PrefixLength,Unsigned32,read-write,,mandatory,,The prefix length associated with the  hpSwitchCosAddressIpv6 object, if an IPv6 CoS  configuration is valid and hpSwitchCosAddressType is type ipv6. This variable will otherwise be ignored. The prefix length for an IPv6 entry functions in the  same way as an address mask for an IPv4 entry. The  default value of this object is 128, which specifies the exact IPv6 address defined in  hpSwitchCosAddressIpv6 (i.e., no subnet-masking is performed).
.1.3.6.1.4.1.11.2.14.11.5.1.7.1.17.5,CONFIG-MIB::hpSwitchCosTosConfig,,,,,,
.1.3.6.1.4.1.11.2.14.11.5.1.7.1.17.5.1,CONFIG-MIB::hpSwitchCosTosConfigMode,INTEGER,read-write,,mandatory,disable(1):ipprecedence(2):diffserv(3),The operational status of Type of Service based Class of Service.
.1.3.6.1.4.1.11.2.14.11.5.1.7.1.17.5.2,CONFIG-MIB::hpSwitchCosTosConfigTable,,not-accessible,,mandatory,,A table that contains information about the CoS Type of Service configurations on this switch. This table is used only when the hpSwitchCosTosConfigMode is set to diffserv.
.1.3.6.1.4.1.11.2.14.11.5.1.7.1.17.5.2.1,CONFIG-MIB::hpSwitchCosTosConfigEntry,,not-accessible,hpSwitchCosTosIndex,mandatory,,The information associated with each CoS TOS configuration.
.1.3.6.1.4.1.11.2.14.11.5.1.7.1.17.5.2.1.1,CONFIG-MIB::hpSwitchCosTosIndex,INTEGER,read-only,,mandatory,,Packets with this value in the upper bits of the Type of Service field of the IP protocol header will receive the new priority value. For Differentiated Services the upper 6 bits of the TOS field are used.
.1.3.6.1.4.1.11.2.14.11.5.1.7.1.17.5.2.1.2,CONFIG-MIB::hpSwitchCosTosPriority,INTEGER,read-write,,deprecated,,The 802.1p priority value to assign to packets received for the specified TOS. This value will be inserted in the 802.1Q tag and the packet will be placed in the appropriate outbound port queue. The value of 255 is used to indicate No Override.
.1.3.6.1.4.1.11.2.14.11.5.1.7.1.17.5.2.1.3,CONFIG-MIB::hpSwitchCosTosDSCPPolicy,INTEGER,read-write,,mandatory,,The DSCP Policy to assign to packets received for the specified ToS codepoint. This is an index into the hpSwitchCosDSCPPolicy table, or the value  policy is associated with an 802.1p priority value, which will be inserted in the 802.1Q tag and will cause the packet to be placed in the appropriate outbound port queue. The DSCP policy value (a Differentiated Services codepoint) will also replace the incoming value of the Differentiated Services field of the IP Type-of-Service byte.
.1.3.6.1.4.1.11.2.14.11.5.1.7.1.17.5.2.1.4,CONFIG-MIB::hpSwitchCosTosResolvedPriority,INTEGER,read-only,,mandatory,,The 802.1p priority that will be applied to packets received for the specified ToS. This value represents the actual operating value for this given ToS entry. A value of 255 represents no override of the incoming priority. If hpSwitchCosTosApplyPolicy is set to applyInheritedPriority, the parallel codepoint in the hpSwitchCosDSCPPolicyConfigTable is used to determine the operating priority. Otherwise if set to applyHpSwitchCosTosDSCPPolicy, the priority for the codepoint that the hpSwitchCosTosDSCPPolicy is indexing will be used.
.1.3.6.1.4.1.11.2.14.11.5.1.7.1.17.5.2.1.5,CONFIG-MIB::hpSwitchCosTosApplyPolicy,INTEGER,read-write,,mandatory,applyInheritedPriority(1):applyHpSwitchCosTosDSCPPolicy(2),This object determines which configuration policy,  applyInheritedPriority or hpSwitchCosTosDSCPPolicy, applies for the given Tos CoS entry.
.1.3.6.1.4.1.11.2.14.11.5.1.7.1.17.6,CONFIG-MIB::hpSwitchCosDSCPPolicyConfigTable,,not-accessible,,mandatory,,A table that contains information about the priority applied to each of the Differentiated Services Code Points.
.1.3.6.1.4.1.11.2.14.11.5.1.7.1.17.6.1,CONFIG-MIB::hpSwitchCosDSCPPolicyConfigEntry,,not-accessible,hpSwitchCosDSCPPolicyIndex,mandatory,,A list of objects describing a DiffServe Codepoint (DSCP), and the 802.1p priority to apply for that DSCP.
.1.3.6.1.4.1.11.2.14.11.5.1.7.1.17.6.1.1,CONFIG-MIB::hpSwitchCosDSCPPolicyIndex,INTEGER,not-accessible,,mandatory,,An index to uniquely identify each row in the  hpSwitchCosDSCPPolicyConfigTable.
.1.3.6.1.4.1.11.2.14.11.5.1.7.1.17.6.1.2,CONFIG-MIB::hpSwitchCosDSCPPolicyPriority,INTEGER,read-write,,mandatory,,The 802.1p priority value to assign to packets with a given DSCP. This value will be inserted in the 802.1Q tag and the packet will be placed in the appropriate outbound port queue. The value of 255 is used to indicate no override of the incoming priority.
.1.3.6.1.4.1.11.2.14.11.5.1.7.1.17.6.1.3,CONFIG-MIB::hpSwitchCosDSCPPolicyName,OCTET,read-write,,mandatory,,A user settable name describing a DSCP policy table entry.
.1.3.6.1.4.1.11.2.14.11.5.1.7.1.17.7,CONFIG-MIB::hpSwitchCosAppTypeConfigTable,,not-accessible,,mandatory,,A table that contains information about the CoS Application type configurations on the switch. An application is determined by its network source and/or destination port number.
.1.3.6.1.4.1.11.2.14.11.5.1.7.1.17.7.1,CONFIG-MIB::hpSwitchCosAppTypeConfigEntry,,not-accessible,hpSwitchCosAppTypeConfigIndex,mandatory,,An entry in the switch hpSwitchCosAppTypeConfigEntry Table.
.1.3.6.1.4.1.11.2.14.11.5.1.7.1.17.7.1.1,CONFIG-MIB::hpSwitchCosAppTypeConfigIndex,INTEGER,not-accessible,,mandatory,,An index to uniquely identify this hpSwitchCosAppType row.
.1.3.6.1.4.1.11.2.14.11.5.1.7.1.17.7.1.2,CONFIG-MIB::hpSwitchCosAppTypeConfigType,INTEGER,read-write,,mandatory,udpSrcPortConfig(1):udpDestPortConfig(2):udpBothPortsConfig(3):tcpSrcPortConfig(4):tcpDestPortConfig(5):tcpBothPortsConfig(6),This signifies which network port number to apply to the given CoS Application policy.
.1.3.6.1.4.1.11.2.14.11.5.1.7.1.17.7.1.3,CONFIG-MIB::hpSwitchCosAppTypeSrcPort,INTEGER,read-write,,mandatory,,This object represents the source network port that this policy applies to.
.1.3.6.1.4.1.11.2.14.11.5.1.7.1.17.7.1.4,CONFIG-MIB::hpSwitchCosAppTypeDestPort,INTEGER,read-write,,mandatory,,This object represents the destination network port that this policy applies to.
.1.3.6.1.4.1.11.2.14.11.5.1.7.1.17.7.1.5,CONFIG-MIB::hpSwitchCosAppTypePriority,INTEGER,read-write,,mandatory,,The 802.1p priority that should be applied to packets containing the particular configured source and/or destination port number in this entry. A value of 255 represents that no priority override should take place.
.1.3.6.1.4.1.11.2.14.11.5.1.7.1.17.7.1.6,CONFIG-MIB::hpSwitchCosAppTypeDSCPPolicy,INTEGER,read-write,,mandatory,,The DSCP Policy to assign to packets received for the specified application. This is an index into the hpSwitchCosDSCPPolicy table, or the value 255 indicating no DSCP Policy exists. This policy is associated with an 802.1p priority value, which will be inserted in the 802.1Q tag and will cause the packet to be placed in the appropriate outbound port queue. The DSCP policy value (a Differentiated Services codepoint) will also be written into the Differentiated-Services field of the IP Type-of-Service byte. The value of 255 is used to indicate No Override.
.1.3.6.1.4.1.11.2.14.11.5.1.7.1.17.7.1.7,CONFIG-MIB::hpSwitchCosAppTypeResolvedPriority,INTEGER,read-only,,mandatory,,The 802.1p priority that will be applied to packets received on the specified application. This value represents the actual operating value for this CoS application entry. A value of 255 represents no override of the incoming priority
.1.3.6.1.4.1.11.2.14.11.5.1.7.1.17.7.1.8,CONFIG-MIB::hpSwitchCosAppTypeApplyPolicy,INTEGER,read-write,,mandatory,applyHpSwitchCosAppTypePriority(1):applyHpSwitchCosAppTypeDSCPPolicy(2),This object determines which configuration policy, hpSwitchCosAppTypePriority or hpSwitchCosAppTypeDSCPPolicy, applies for the given AppType CoS entry. These configuration policies are mutually exclusive of one another.
.1.3.6.1.4.1.11.2.14.11.5.1.7.1.17.7.1.9,CONFIG-MIB::hpSwitchCosAppTypeStatus,INTEGER,read-write,,mandatory,active(1):notInService(2):notReady(3):createAndGo(4):createAndWait(5):destroy(6),This object is used to create and delete in the  hpSwitchCosAppType table.
.1.3.6.1.4.1.11.2.14.11.5.1.7.1.17.7.1.10,CONFIG-MIB::hpSwitchCosAppTypeMaxSrcPort,INTEGER,read-write,,mandatory,,This object represents the maximum source network port that this policy applies to. If a single,  specific port is being used and not a range, then value of this object is zero.
.1.3.6.1.4.1.11.2.14.11.5.1.7.1.17.7.1.11,CONFIG-MIB::hpSwitchCosAppTypeMaxDestPort,INTEGER,read-write,,mandatory,,This object represents the maximum destination  network port that this policy applies to. If a  single, specific port is being used and not a range,  then value of this object is zero.
.1.3.6.1.4.1.11.2.14.11.5.1.7.1.17.7.1.12,CONFIG-MIB::hpSwitchCosAppTypeIpPacketType,INTEGER,read-write,,mandatory,ipv4PacketsOnly(1):ipv6PacketsOnly(2):ipv4AndIpv6Packets(3),This object represents the type of IP packet for which this TCP and/or UDP application QoS will apply. The  default is IPv4.
.1.3.6.1.4.1.11.2.14.11.5.1.7.1.17.8,CONFIG-MIB::hpSwitchCosLastChange,TimeTicks,read-only,,mandatory,,The value of the agent's sysUptime when the last time this device experienced a change in the  Class of Service configuration.
.1.3.6.1.4.1.11.2.14.11.5.1.7.1.17.9,CONFIG-MIB::hpSwitchConfigCosLastConfigError,INTEGER,read-only,,mandatory,aclQosNoError(1):aclQosTooManyRulesError(2):aclQosTooManyMasksError(3):aclQosTooManyRangesError(4):aclQosTooManyMetersError(5):aclQosTooManyLookupsError(6),The type of the last QoS  configuration result or error.  This object is updated for each new QoS configuration. It is reset upon reboot.
.1.3.6.1.4.1.11.2.14.11.5.1.7.1.17.10,CONFIG-MIB::hpSwitchQueueWatchTable,,not-accessible,,mandatory,,A table that contains port-specific information for queue monitoring.
.1.3.6.1.4.1.11.2.14.11.5.1.7.1.17.10.1,CONFIG-MIB::hpSwitchQueueWatchEntry,,not-accessible,hpSwitchQueueWatchPort,mandatory,,A list of information maintained by every port about queue monitoring for that port.
.1.3.6.1.4.1.11.2.14.11.5.1.7.1.17.10.1.1,CONFIG-MIB::hpSwitchQueueWatchPort,INTEGER,read-only,,mandatory,,The port number of the port for which this entry contains Queue monitoring information.
.1.3.6.1.4.1.11.2.14.11.5.1.7.1.17.10.1.2,CONFIG-MIB::hpSwitchQueueWatchState,INTEGER,read-write,,mandatory,disabled(1):outbound(2),If configured for outbound, egress queues for the  corresponding port will be monitored for drops.
.1.3.6.1.4.1.11.2.14.11.5.1.7.1.18,CONFIG-MIB::hpSwitchMeshConfig,,,,,,
.1.3.6.1.4.1.11.2.14.11.5.1.7.1.18.1,CONFIG-MIB::hpSwitchMeshMulticastAgingMode,INTEGER,read-write,,deprecated,aging(1):nonaging(2),With meshing active, a value of aging will cause learned multicast addresses to be aged out within the required address aging interval. A setting of non-aging will prevent learned multicast addresses from being removed from the switch. Multicast addresses learned while in non-aging mode are not removed until the switch is rebooted.
.1.3.6.1.4.1.11.2.14.11.5.1.7.1.18.2,CONFIG-MIB::hpSwitchMeshBackwardCompatibility,INTEGER,read-write,,mandatory,enable(1):disable(2),Due to some hardware differences, the Series 1600/24xx/4000/8000 switches cannot be used directly in a mesh environment with Series 5300XL switches. Series 5300XL switches need to emulate the operation of Series 1600/24xx/4000/8000 switches in order to have a heterogeneous mesh working properly. Meshing backward-compatibility feature allows Series 5300XL switches to operate in a compatible mode in which the operation of Series 1600/24xx/4000/8000 switches are emulated. When backward-compatibility is enabled, meshing software will establish connections with Series 1600/24xx/4000/8000 switches and emulate their operation. When backward-compatibility disabled, Series 1600/24xx/4000/8000 switches in the mesh will be ignored by the Series 5300XL switches.
.1.3.6.1.4.1.11.2.14.11.5.1.7.1.18.3,CONFIG-MIB::hpSwitchMeshConfiguredId,INTEGER,read-write,,mandatory,,Specify a mesh id for this member. The mesh id is an optional parameter that, if specified should be unique for each switch participating in the mesh. Specifying unique IDs will improve performance by eliminating a costly mesh election process each time a participating switch is brought online. Default value of mesh configured id returns to default behavior of auto-negotiation. Mesh configured id take effect only after reboot.
.1.3.6.1.4.1.11.2.14.11.5.1.7.1.18.4,CONFIG-MIB::hpSwitchMeshActualId,INTEGER,read-only,,mandatory,,This object is a mesh id that the switches in a mesh are using currently. If mesh configured id is not specified or if it is not unique then the switches in the mesh will auto-negotiate unique IDs. Mesh Actual id is not necessary to be same as mesh configured id. Actual mesh id may differ from mesh configured id if switches in a mesh auto-negotiate unique IDs.
.1.3.6.1.4.1.11.2.14.11.5.1.7.1.19,CONFIG-MIB::hpSwitchPortIsolationConfig,,,,,,
.1.3.6.1.4.1.11.2.14.11.5.1.7.1.19.1,CONFIG-MIB::hpSwitchPortIsolationMode,INTEGER,read-write,,mandatory,enable(1):disable(2),This enables the port isolation feature on the device. Note: Enabling this feature may require VLANS to be configured properly.
.1.3.6.1.4.1.11.2.14.11.5.1.7.1.19.2,CONFIG-MIB::hpSwitchPortIsolationConfigTable,,not-accessible,,mandatory,,A table that contains information about the CoS Application type configurations on the switch. An application is determined by its network source and/or destination port number.
.1.3.6.1.4.1.11.2.14.11.5.1.7.1.19.2.1,CONFIG-MIB::hpSwitchPortIsolationConfigEntry,,not-accessible,hpSwitchPortIsolationPort,mandatory,,An entry in the switch hpSwitchPortIsolationConfigEntry Table.
.1.3.6.1.4.1.11.2.14.11.5.1.7.1.19.2.1.1,CONFIG-MIB::hpSwitchPortIsolationPort,INTEGER,not-accessible,,mandatory,,An entry in the IfIndex table representing a logical port on this switch.
.1.3.6.1.4.1.11.2.14.11.5.1.7.1.19.2.1.2,CONFIG-MIB::hpSwitchPortIsolationPortMode,INTEGER,read-write,,mandatory,uplink(1):public(2):private(3):local(4):group1(5):group2(6),Defines the operational mode of a port when Port Isolation feature is enabled.
.1.3.6.1.4.1.11.2.14.11.5.1.7.1.20,CONFIG-MIB::hpSwitchSshConfig,,,,,,
.1.3.6.1.4.1.11.2.14.11.5.1.7.1.20.1,CONFIG-MIB::hpSwitchSshAdminStatus,INTEGER,read-write,,mandatory,enable(1):disable(2),The status of the SSH operation.
.1.3.6.1.4.1.11.2.14.11.5.1.7.1.20.2,CONFIG-MIB::hpSwitchSshVersion,INTEGER,read-write,,mandatory,version1(1):version2(2):version1or2(3),The version of the SSH protocol to run.  'version1' will accept connections from v1.3 or v1.5 clients. 'version2' will accept  connections only from v2.0 clients. The default is 'version1_or_2' which will accept any  connection which can be successfully negotiated.
.1.3.6.1.4.1.11.2.14.11.5.1.7.1.20.3,CONFIG-MIB::hpSwitchSshTimeout,INTEGER,read-write,,mandatory,,The maximum length of time (in seconds) between the wakeup  of SSH task and successful protocol negotiation and  authentication. The default is 120 seconds.
.1.3.6.1.4.1.11.2.14.11.5.1.7.1.20.4,CONFIG-MIB::hpSwitchSshPortNumber,INTEGER,read-write,,mandatory,,The port number on which SSH daemon should listen for connection requests.
.1.3.6.1.4.1.11.2.14.11.5.1.7.1.20.5,CONFIG-MIB::hpSwitchSshServerKeySize,INTEGER,read-write,,mandatory,bits512(1):bits768(2):bits1024(3),Specifies the key size (in bits) of version 1 SSH host rsa key
.1.3.6.1.4.1.11.2.14.11.5.1.7.1.20.6,CONFIG-MIB::hpSwitchSshFileServerAdminStatus,INTEGER,read-write,,mandatory,enable(1):disable(2),Specifies whether or not the SSH daemon will accept and process file transfer requests.
.1.3.6.1.4.1.11.2.14.11.5.1.7.1.20.7,CONFIG-MIB::hpSwitchSshIpVersion,INTEGER,read-write,,deprecated,ipv4(1):ipv6(2):ipv4or6(3),#### THIS OBJECT IS DEPRECATED #### The types of IP connections SSH will support.  'ipv4' will accept connections from Ipv4 clients. 'ipv6' will accept  connections only from ipv6 clients. The default is 'ipv4or6' which will accept  Connections from both ipv4 and ipv6 clients.
.1.3.6.1.4.1.11.2.14.11.5.1.7.1.21,CONFIG-MIB::hpSwitchPendingConfig,,,,,,
.1.3.6.1.4.1.11.2.14.11.5.1.7.1.21.1,CONFIG-MIB::hpSwitchPendingConfigControl,INTEGER,read-write,,mandatory,applyMstp(1):resetMstp(2):noAction(3),The object controls switch pending configuration. If set to the 'applyMstp' value the object applies  pending Multiple Spanning Tree Protocol (MSTP)  configuration. The 'resetMstp' value, if set, triggers  copying of the active MSTP configuration to the  pending one. Before the pending configuration is applied its consistency is verified and the request fails if  errors are detected.  The value the object returns is undefined.
.1.3.6.1.4.1.11.2.14.11.5.1.7.1.22,CONFIG-MIB::hpSwitchBWMinConfig,,,,,,
.1.3.6.1.4.1.11.2.14.11.5.1.7.1.22.1,CONFIG-MIB::hpSwitchBWMinEgressPortConfigTable,,not-accessible,,deprecated,,New definitions under HP-ICF-RATE-LIMIT-MIB. A table that contains information about the port's
.1.3.6.1.4.1.11.2.14.11.5.1.7.1.22.1.1,CONFIG-MIB::hpSwitchBWMinEgressPortConfigEntry,,not-accessible,hpSwitchBWMinEgressPortIndex,deprecated,,New definitions under HP-ICF-RATE-LIMIT-MIB. The information associated with each port's egress Guaranteed Minimum Bandwidth configuration.
.1.3.6.1.4.1.11.2.14.11.5.1.7.1.22.1.1.1,CONFIG-MIB::hpSwitchBWMinEgressPortIndex,INTEGER,read-only,,deprecated,,New definitions under HP-ICF-RATE-LIMIT-MIB. The ifIndex value which uniquely identifies a row in the Interfaces Table.
.1.3.6.1.4.1.11.2.14.11.5.1.7.1.22.1.1.2,CONFIG-MIB::hpSwitchBWMinEgressPortPrctLowPriority,INTEGER,read-write,,deprecated,,New definitions under HP-ICF-RATE-LIMIT-MIB. The percentage of Guaranteed Minimum bandwidth to
.1.3.6.1.4.1.11.2.14.11.5.1.7.1.22.1.1.3,CONFIG-MIB::hpSwitchBWMinEgressPortPrctNormalPriority,INTEGER,read-write,,deprecated,,New definitions under HP-ICF-RATE-LIMIT-MIB. The percentage of Guaranteed Minimum bandwidth to
.1.3.6.1.4.1.11.2.14.11.5.1.7.1.22.1.1.4,CONFIG-MIB::hpSwitchBWMinEgressPortPrctMedPriority,INTEGER,read-write,,deprecated,,New definitions under HP-ICF-RATE-LIMIT-MIB. The percentage of Guaranteed Minimum bandwidth to
.1.3.6.1.4.1.11.2.14.11.5.1.7.1.22.1.1.5,CONFIG-MIB::hpSwitchBWMinEgressPortPrctHighPriority,INTEGER,read-write,,deprecated,,New definitions under HP-ICF-RATE-LIMIT-MIB. The percentage of Guaranteed Minimum bandwidth to
.1.3.6.1.4.1.11.2.14.11.5.1.7.1.23,CONFIG-MIB::hpSwitchRateLimitPortConfig,,,,,,
.1.3.6.1.4.1.11.2.14.11.5.1.7.1.23.1,CONFIG-MIB::hpSwitchRateLimitPortConfigTable,,not-accessible,,mandatory,,A table that contains information about the port Rate-Limiting configurations on this switch.
.1.3.6.1.4.1.11.2.14.11.5.1.7.1.23.1.1,CONFIG-MIB::hpSwitchRateLimitPortConfigEntry,,not-accessible,hpSwitchRateLimitPortIndex,mandatory,,The information associated with each port's Rate-Limiting configuration.
.1.3.6.1.4.1.11.2.14.11.5.1.7.1.23.1.1.1,CONFIG-MIB::hpSwitchRateLimitPortIndex,INTEGER,read-only,,mandatory,,The ifIndex value which uniquely identifies a row in the Interfaces Table.
.1.3.6.1.4.1.11.2.14.11.5.1.7.1.23.1.1.2,CONFIG-MIB::hpSwitchRateLimitPortControlMode,INTEGER,read-write,,mandatory,disabled(1):rateLimitPerPortOnly(2):rateLimitPerQueue(3),The mode by which this port will be Rate-Limited on ingress. If rateLimitPerPortOnly is configured, there will be a single maximum rate for the entire port. If rateLimitPerQueue is configured, the values for each of the four queues indicate the maximum percentage of port traffic that may be received by that queue (the sum of these values must not exceed 100). When rate-limiting is disabled, there are no maximum controls on ingress for this port.
.1.3.6.1.4.1.11.2.14.11.5.1.7.1.23.1.1.3,CONFIG-MIB::hpSwitchRateLimitPortSingleControlPrct,INTEGER,read-write,,mandatory,,When hpSwitchRateLimitPortControlMode is configured for rateLimitPerPortOnly, this value is the maximum percentage of traffic that may be received by this port on ingress.
.1.3.6.1.4.1.11.2.14.11.5.1.7.1.23.1.1.4,CONFIG-MIB::hpSwitchRateLimitPortPrctLowPriority,INTEGER,read-write,,mandatory,,The maximum percentage of traffic that may be received by this port's Low-Priority queue on ingress. hpSwitchRateLimitPortControlMode must be configured to use rateLimitPerQueue for this to take effect. A value of 0-percent for any queue means that no traffic will ever be received on this port for that ingress queue. Total values for all four queues must not exceed 100 percent.
.1.3.6.1.4.1.11.2.14.11.5.1.7.1.23.1.1.5,CONFIG-MIB::hpSwitchRateLimitPortPrctNormalPriority,INTEGER,read-write,,mandatory,,The maximum percentage of traffic that may be received by this port's Normal-Priority queue on ingress. hpSwitchRateLimitPortControlMode must be configured to use rateLimitPerQueue for this to take effect. A value of 0-percent for any queue means that no traffic will ever be received on this port for that ingress queue. Total values for all four queues must not exceed 100 percent.
.1.3.6.1.4.1.11.2.14.11.5.1.7.1.23.1.1.6,CONFIG-MIB::hpSwitchRateLimitPortPrctMedPriority,INTEGER,read-write,,mandatory,,The maximum percentage of traffic that may be received by this port's Medium-Priority queue on ingress. hpSwitchRateLimitPortControlMode must be configured to use rateLimitPerQueue for this to take effect. A value of 0-percent for any queue means that no traffic will ever be received on this port for that ingress queue. Total values for all four queues must not exceed 100 percent.
.1.3.6.1.4.1.11.2.14.11.5.1.7.1.23.1.1.7,CONFIG-MIB::hpSwitchRateLimitPortPrctHighPriority,INTEGER,read-write,,mandatory,,The maximum percentage of traffic that may be received by this port's High-Priority queue on ingress. hpSwitchRateLimitPortControlMode must be configured to use rateLimitPerQueue for this to take effect. A value of 0-percent for any queue means that no traffic will ever be received on this port for that ingress queue. Total values for all four queues must not exceed 100 percent.
.1.3.6.1.4.1.11.2.14.11.5.1.7.1.24,CONFIG-MIB::hpSwitchQosPassThroughMode,,,,,,
.1.3.6.1.4.1.11.2.14.11.5.1.7.1.24.1,CONFIG-MIB::hpSwitchQosPassThroughModeConfig,INTEGER,read-write,,mandatory,optimized(1):typical(2):balanced(3):onequeue(4),Specify the queue configuration mode for the switch.  While changing the queue configuration mode this feature  momentarily require to bring down the logical port and  after the initialization of the queues the ports are  brought up.
.1.3.6.1.4.1.11.2.14.11.5.1.7.1.25,CONFIG-MIB::hpSwitchReboot,,,,,,
.1.3.6.1.4.1.11.2.14.11.5.1.7.1.25.1,CONFIG-MIB::hpSwitchRebootConfig,INTEGER,read-only,,mandatory,yes(1):no(2),This tells the status of the switch whether it requires reboot for some variable to get effective. The value of this variable can be   yes (1) reboot is required. no (2) reboot is not required.
.1.3.6.1.4.1.11.2.14.11.5.1.7.1.25.2,CONFIG-MIB::hpSwitchRebootFastBoot,INTEGER,read-write,,mandatory,enable(1):disable(2),Specifies whether fastboot is enabled or not on the switch.
.1.3.6.1.4.1.11.2.14.11.5.1.7.1.26,CONFIG-MIB::hpSwitchProtectedPortsConfig,,,,,,
.1.3.6.1.4.1.11.2.14.11.5.1.7.1.26.1,CONFIG-MIB::hpSwitchProtectedPortsMask,OCTET,read-write,,mandatory,,This variable specifies a group of ports that are not allowed to communicate to each-other. Each octet within the value of this object specifies a set of eight ports, with the first octet specifying ports 1 through 8, the second octet specifying ports 9 through 16, etc. Within each octet, the most significant bit represents the lowest numbered port, and the least significant bit represents the highest numbered port. Thus, each port of the switch is represented by a single bit within the value of this object.
.1.3.6.1.4.1.11.2.14.11.5.1.7.1.27,DT-MIB::hpSwitchDt,,,,,,This MIB module contains HP proprietary Distributed Trunking(DT) MIB.
.1.3.6.1.4.1.11.2.14.11.5.1.7.1.27.1,DT-MIB::hpSwitchISCPortIndex,Integer32,read-write,,current,,The ifIndex value of Inter Switch Connection (ISC)  port. The default value is 0, which means there  is no ISC port configured.
.1.3.6.1.4.1.11.2.14.11.5.1.7.1.27.2,DT-MIB::hpSwitchRemoteISCPortIndex,Integer32,read-only,,current,,The logical port value of remote switch Inter Switch  Connection Port. The default value is 0, which means there is no ISC port configured.
.1.3.6.1.4.1.11.2.14.11.5.1.7.1.27.3,DT-MIB::hpSwitchDtLacpStatus,,,,,,
.1.3.6.1.4.1.11.2.14.11.5.1.7.1.27.3.1,DT-MIB::hpSwitchDtLacpStatusLocalTable,,not-accessible,,current,,This table holds the lacp status information of all  ports that are members of trunks configured as type 
.1.3.6.1.4.1.11.2.14.11.5.1.7.1.27.3.1.1,DT-MIB::hpSwitchDtLacpStatusLocalEntry,,not-accessible,hpSwitchDtLacpLocalIfIndex,current,,The lacp status information of each local port that is part of a trunk configured as type 'dt-lacp'.
.1.3.6.1.4.1.11.2.14.11.5.1.7.1.27.3.1.1.1,DT-MIB::hpSwitchDtLacpLocalIfIndex,Integer32,read-only,,current,,The ifIndex value of the local interface.
.1.3.6.1.4.1.11.2.14.11.5.1.7.1.27.3.1.1.2,DT-MIB::hpSwitchDtLacpLocalIfName,OCTET,read-only,,current,,The ifName value of the local interface.
.1.3.6.1.4.1.11.2.14.11.5.1.7.1.27.3.1.1.3,DT-MIB::hpSwitchDtLacpLocalIfLacpEnable,Integer32,read-only,,current,,The lacp configuration for the local interface.
.1.3.6.1.4.1.11.2.14.11.5.1.7.1.27.3.1.1.4,DT-MIB::hpSwitchDtLacpLocalIfTrunkGroup,Integer32,read-only,,current,,The trunk group information of the local interface.
.1.3.6.1.4.1.11.2.14.11.5.1.7.1.27.3.1.1.5,DT-MIB::hpSwitchDtLacpLocalIfLacpPortStatus,Integer32,read-only,,current,,The lacp port status information of the local  interface.
.1.3.6.1.4.1.11.2.14.11.5.1.7.1.27.3.1.1.6,DT-MIB::hpSwitchDtLacpLocalIfLacpPartner,Integer32,read-only,,current,,The lacp partner information of the local  interface.
.1.3.6.1.4.1.11.2.14.11.5.1.7.1.27.3.1.1.7,DT-MIB::hpSwitchDtLacpLocalIfLacpStatus,Integer32,read-only,,current,,The lacp status information of the local interface.
.1.3.6.1.4.1.11.2.14.11.5.1.7.1.27.3.1.1.8,DT-MIB::hpSwitchDtLacpLocalIfLacpAdminKey,Integer32,read-only,,current,,The lacp admin key information of the local  interface.
.1.3.6.1.4.1.11.2.14.11.5.1.7.1.27.3.1.1.9,DT-MIB::hpSwitchDtLacpLocalIfLacpOperKey,Integer32,read-only,,current,,The lacp operational key information of the local interface.
.1.3.6.1.4.1.11.2.14.11.5.1.7.1.27.3.2,DT-MIB::hpSwitchDtLacpStatusPeerTable,,not-accessible,,current,,This table holds the lacp status information of  all ports that are members of trunks configured as type 'dt-lacp'.
.1.3.6.1.4.1.11.2.14.11.5.1.7.1.27.3.2.1,DT-MIB::hpSwitchDtLacpStatusPeerEntry,,not-accessible,hpSwitchDtLacpPeerIfIndex,current,,The lacp status information of each peer port that is part of a trunk configured as type 'dt-lacp'.
.1.3.6.1.4.1.11.2.14.11.5.1.7.1.27.3.2.1.1,DT-MIB::hpSwitchDtLacpPeerIfIndex,Integer32,read-only,,current,,The ifIndex value of the peer interface.
.1.3.6.1.4.1.11.2.14.11.5.1.7.1.27.3.2.1.2,DT-MIB::hpSwitchDtLacpPeerIfName,OCTET,read-only,,current,,The ifName value of the peer interface.
.1.3.6.1.4.1.11.2.14.11.5.1.7.1.27.3.2.1.3,DT-MIB::hpSwitchDtLacpPeerIfLacpEnable,Integer32,read-only,,current,,The lacp configuration for the peer interface.
.1.3.6.1.4.1.11.2.14.11.5.1.7.1.27.3.2.1.4,DT-MIB::hpSwitchDtLacpPeerIfTrunkGroup,Integer32,read-only,,current,,The trunk group information of the peer interface.
.1.3.6.1.4.1.11.2.14.11.5.1.7.1.27.3.2.1.5,DT-MIB::hpSwitchDtLacpPeerIfLacpPortStatus,Integer32,read-only,,current,,The lacp port status information of the peer  interface.
.1.3.6.1.4.1.11.2.14.11.5.1.7.1.27.3.2.1.6,DT-MIB::hpSwitchDtLacpPeerIfLacpPartner,Integer32,read-only,,current,,The lacp partner information of the peer  interface.
.1.3.6.1.4.1.11.2.14.11.5.1.7.1.27.3.2.1.7,DT-MIB::hpSwitchDtLacpPeerIfLacpStatus,Integer32,read-only,,current,,The lacp status information of the peer interface.
.1.3.6.1.4.1.11.2.14.11.5.1.7.1.27.4,DT-MIB::hpSwitchDtConfig,,,,,,
.1.3.6.1.4.1.11.2.14.11.5.1.7.1.27.4.1,DT-MIB::hpSwitchDtPeerKeepAliveConfig,,,,,,
.1.3.6.1.4.1.11.2.14.11.5.1.7.1.27.4.1.1,DT-MIB::hpSwitchDtPeerKeepAliveDestAddressType,INTEGER,read-write,,current,unknown(0):ipv4(1):ipv6(2):ipv4z(3):ipv6z(4):dns(16),The address type of the peer keep-alive destination address. Only IPv4 type is supported.
.1.3.6.1.4.1.11.2.14.11.5.1.7.1.27.4.1.2,DT-MIB::hpSwitchDtPeerKeepAliveDestAddress,OCTET,read-write,,current,,The destination IP address to be used by DT  switches to send peer keep-alive packets to  the peer DT switch.
.1.3.6.1.4.1.11.2.14.11.5.1.7.1.27.4.1.3,DT-MIB::hpSwitchDtPeerKeepAliveVlanId,Integer32,read-write,,current,,The interface on which peer keep-alive packets  are sent out. A value of zero indicates peer keep-alive interface is not configured.
.1.3.6.1.4.1.11.2.14.11.5.1.7.1.27.4.1.4,DT-MIB::hpSwitchDtPeerKeepAliveDestUdpPort,Unsigned32,read-write,,current,,The current value of the destination UDP port for  transmitting peer keep-alive messages.
.1.3.6.1.4.1.11.2.14.11.5.1.7.1.27.4.1.5,DT-MIB::hpSwitchDtPeerKeepAliveInterval,Integer32,read-write,,current,,The current value of peer keep-alive packet  milliseconds.
.1.3.6.1.4.1.11.2.14.11.5.1.7.1.27.4.1.6,DT-MIB::hpSwitchDtPeerKeepAliveTimeout,Integer32,read-write,,current,,The peer keep-alive timeout period for DT switches  in seconds.
.1.3.6.1.4.1.11.2.14.11.5.1.7.1.27.4.1.7,DT-MIB::hpSwitchDtPeerKeepAliveHoldTime,Integer32,read-write,,current,,The current value of keep-alive hold timer for DT  switches in seconds.
.1.3.6.1.4.1.11.2.14.11.5.1.7.1.27.5,DT-MIB::hpSwitchDtStats,,,,,,
.1.3.6.1.4.1.11.2.14.11.5.1.7.1.27.5.1,DT-MIB::hpSwitchDtIscProtocolStats,,,,,,
.1.3.6.1.4.1.11.2.14.11.5.1.7.1.27.5.1.1,DT-MIB::hpSwitchDtIscHelloPktsSent,Counter32,read-only,,current,,The total number of ISC protocol hello packets sent  to the peer DT switch.
.1.3.6.1.4.1.11.2.14.11.5.1.7.1.27.5.1.2,DT-MIB::hpSwitchDtIscHelloPktsRecv,Counter32,read-only,,current,,The total number of ISC protocol hello packets
.1.3.6.1.4.1.11.2.14.11.5.1.7.1.27.5.1.3,DT-MIB::hpSwitchDtIscMACLearnPktsSent,Counter32,read-only,,current,,The total number of MAC learn packets sent to the peer switch.
.1.3.6.1.4.1.11.2.14.11.5.1.7.1.27.5.1.4,DT-MIB::hpSwitchDtIscMACLearnPktsRecv,Counter32,read-only,,current,,The total number of MAC learn packets received from the peer switch.
.1.3.6.1.4.1.11.2.14.11.5.1.7.1.27.5.1.5,DT-MIB::hpSwitchDtIscMACAgedPktsSent,Counter32,read-only,,current,,The total number of MAC ageout packets sent to the  peer switch.
.1.3.6.1.4.1.11.2.14.11.5.1.7.1.27.5.1.6,DT-MIB::hpSwitchDtIscMACAgedPktsRecv,Counter32,read-only,,current,,The total number of MAC ageouts received from the peer switch.
.1.3.6.1.4.1.11.2.14.11.5.1.7.1.27.5.2,DT-MIB::hpSwitchDtPeerKeepAliveStats,,,,,,
.1.3.6.1.4.1.11.2.14.11.5.1.7.1.27.5.2.1,DT-MIB::hpSwitchDtPeerKeepAlivePktsSent,Counter32,read-only,,current,,The number of peer keep-alive packets sent on the keep-alive interface.
.1.3.6.1.4.1.11.2.14.11.5.1.7.1.27.5.2.2,DT-MIB::hpSwitchDtPeerKeepAlivePktsRecv,Counter32,read-only,,current,,The number of valid peer keep-alive packets received on the keep-alive interface.
.1.3.6.1.4.1.11.2.14.11.5.1.7.1.27.256,DT-MIB::hpSwitchDtConformance,,,,,,
.1.3.6.1.4.1.11.2.14.11.5.1.7.1.27.256.1,DT-MIB::hpSwitchDtCompliances,,,,,,
.1.3.6.1.4.1.11.2.14.11.5.1.7.1.27.256.1.1,DT-MIB::hpSwitchDtCompliance,,,,,,The compliance statement for the entries in  the Distributed Trunking MIB.
.1.3.6.1.4.1.11.2.14.11.5.1.7.1.27.256.2,DT-MIB::hpSwitchDtGroups,,,,,,
.1.3.6.1.4.1.11.2.14.11.5.1.7.1.27.256.2.1,DT-MIB::hpSwitchDtIscGroup,,,,,,A collection of objects providing information about switch-interconnect port.
.1.3.6.1.4.1.11.2.14.11.5.1.7.1.27.256.2.2,DT-MIB::hpSwitchDtLocalLacpGroup,,,,,,A collection of objects providing information about local dt-lacp ports.
.1.3.6.1.4.1.11.2.14.11.5.1.7.1.27.256.2.3,DT-MIB::hpSwitchDtRemoteLacpGroup,,,,,,A collection of objects providing information about remote dt-lacp ports.
.1.3.6.1.4.1.11.2.14.11.5.1.7.1.27.256.2.4,DT-MIB::hpSwitchDtPeerKeepAliveGroup,,,,,,A collection of objects providing information about peer keep-alive interface.
.1.3.6.1.4.1.11.2.14.11.5.1.7.1.27.256.2.5,DT-MIB::hpSwitchDtIscStatsGroup,,,,,,A collection of objects providing information about DT ISC protocol.
.1.3.6.1.4.1.11.2.14.11.5.1.7.1.27.256.2.6,DT-MIB::hpSwitchDtPeerKeepAliveStatsGroup,,,,,,A collection of objects providing information about peer keep-alive protocol.
.1.3.6.1.4.1.11.2.14.11.5.1.7.1.28,CONFIG-MIB::hpSwitchLACPConfig,,,,,,
.1.3.6.1.4.1.11.2.14.11.5.1.7.1.28.1,CONFIG-MIB::hpSwitchLACPAllPortsStatus,INTEGER,read-write,,mandatory,disabled(1):active(2):passive(3),Used to set administrative status of LACP on all the ports. A Port can have one of the three administrative status of 
.1.3.6.1.4.1.11.2.14.11.5.1.7.1.29,HP-SWITCH-BASIC-CONFIG-MIB::hpSwitchBasicConfigMIB,,,,,,This MIB module describes objects for basic switch configuration.
.1.3.6.1.4.1.11.2.14.11.5.1.7.1.29.1,HP-SWITCH-BASIC-CONFIG-MIB::hpSwitchBasicConfigObjects,,,,,,
.1.3.6.1.4.1.11.2.14.11.5.1.7.1.29.1.0,HP-SWITCH-BASIC-CONFIG-MIB::hpSwitchNotificationObjects,,,,,,
.1.3.6.1.4.1.11.2.14.11.5.1.7.1.29.1.0.1,HP-SWITCH-BASIC-CONFIG-MIB::hpSwitchStartupConfigSource,INTEGER,accessible-for-notify,,current,unknown(0):viaCli(1):viaSnmp(2):viaWebUI(3),Indicate the method of change to startup config was initiated.
.1.3.6.1.4.1.11.2.14.11.5.1.7.1.29.1.0.2,HP-SWITCH-BASIC-CONFIG-MIB::hpSwitchStartupConfigSourceIPAddrType,INTEGER,accessible-for-notify,,current,unknown(0):ipv4(1):ipv6(2):ipv4z(3):ipv6z(4):dns(16),Indicates the source address type of network agent which made a change. Not valid (set to zero) if change is made via CLI on system console.
.1.3.6.1.4.1.11.2.14.11.5.1.7.1.29.1.0.3,HP-SWITCH-BASIC-CONFIG-MIB::hpSwitchStartupConfigSourceIPAddr,OCTET,accessible-for-notify,,current,,Indicates the source address of network agent which made a change. Not valid (set to zero) if change is made via CLI on system console.
.1.3.6.1.4.1.11.2.14.11.5.1.7.1.29.1.0.4,HP-SWITCH-BASIC-CONFIG-MIB::hpSwitchStartupConfigSourceUsername,OCTET,accessible-for-notify,,current,,Indicates the username of CLI user making the change to startup config. Zero-string if username is not set or change is made via SNMP
.1.3.6.1.4.1.11.2.14.11.5.1.7.1.29.1.0.5,HP-SWITCH-BASIC-CONFIG-MIB::hpSwitchStartupConfigThrottled,INTEGER,accessible-for-notify,,current,true(1):false(2),Indicates if notification throttle was activated and one or more notifications were dropped.
.1.3.6.1.4.1.11.2.14.11.5.1.7.1.29.1.0.6,HP-SWITCH-BASIC-CONFIG-MIB::hpSwitchStartupConfigChange,,,,,,The hpSwitchStartupConfigChange notification signifies that switch's startup config was modified by user/manager.  Notifications might be buffered on the system to be sent after throttle delay. In some cases,  notifications will be dropped. At such event the next transmitted notification will set flag hpSwitchStartupConfigThrottled
.1.3.6.1.4.1.11.2.14.11.5.1.7.1.29.1.0.7,HP-SWITCH-BASIC-CONFIG-MIB::hpSwitchRunningConfigChange,,,,,,Notification of a running configuration change event as recorded in hpSwitchRunningCfgChgTable.
.1.3.6.1.4.1.11.2.14.11.5.1.7.1.29.1.1,HP-SWITCH-BASIC-CONFIG-MIB::hpSwitchSaveConfig,INTEGER,read-write,,current,noConfigSave(1):saveConfig(2),When this object is set to to 'saveConfig' it  results in saving the running configuration of the switch to flash. The saved configuration becomes the boot-up configuration of the switch when it boots next time. When read, this object always returns  'noConfigSave'.
.1.3.6.1.4.1.11.2.14.11.5.1.7.1.29.1.2,HP-SWITCH-BASIC-CONFIG-MIB::hpSwitchAliasTable,,not-accessible,,current,,Table of alias configurations for CLI commands. This table contains information about name of the  alias and the corresponding CLI command.
.1.3.6.1.4.1.11.2.14.11.5.1.7.1.29.1.2.1,HP-SWITCH-BASIC-CONFIG-MIB::hpSwitchAliasEntry,,not-accessible,hpSwitchAliasName,current,,A row in the alias config table.
.1.3.6.1.4.1.11.2.14.11.5.1.7.1.29.1.2.1.1,HP-SWITCH-BASIC-CONFIG-MIB::hpSwitchAliasName,OCTET,not-accessible,,current,,Name of the alias which uniquely identifies  alias configuration table. 'hpSwitchAliasName' can be used in place of 'hpSwitchAliasCommand` on the CLI. Maximum allowed length for alias name is 32 characters.
.1.3.6.1.4.1.11.2.14.11.5.1.7.1.29.1.2.1.2,HP-SWITCH-BASIC-CONFIG-MIB::hpSwitchAliasCommand,OCTET,read-create,,current,,CLI command for which 'hpSwitchAliasName' can be used in CLI. Maximum allowed length for alias command  is 255 characters. This object is required to create  an entry in the table.
.1.3.6.1.4.1.11.2.14.11.5.1.7.1.29.1.2.1.3,HP-SWITCH-BASIC-CONFIG-MIB::hpSwitchAliasConfigRowStatus,INTEGER,read-create,,current,active(1):notInService(2):notReady(3):createAndGo(4):createAndWait(5):destroy(6),Controls creation/deletion of entries  in alias table. Row cant be created when  'hpSwitchAliasCommand' is of zero length.  Row transition to 'notReady' or 'notInService' states are not allowed.
.1.3.6.1.4.1.11.2.14.11.5.1.7.1.29.1.3,HP-SWITCH-BASIC-CONFIG-MIB::hpSwitchACLConfig,,,,,,
.1.3.6.1.4.1.11.2.14.11.5.1.7.1.29.1.3.1,HP-SWITCH-BASIC-CONFIG-MIB::hpSwitchAclLogtimeoutConfig,Integer32,read-write,,current,,ACL deny entries can be logged to the syslog server. Log timeout is the period the switch waits before sending updates about any ACL deny matches to the syslog server. The same log timer will be used for ipv4 and ipv6 logging. The configurable value is from 30 to 300.Maximum limit is given as 65535 so that if the value is increased in the future, the mib need not be modified.
.1.3.6.1.4.1.11.2.14.11.5.1.7.1.29.1.4,HP-SWITCH-BASIC-CONFIG-MIB::hpicfPortCopyNameTable,,not-accessible,,current,,This table contains Mirroring Destination name String.
.1.3.6.1.4.1.11.2.14.11.5.1.7.1.29.1.4.1,HP-SWITCH-BASIC-CONFIG-MIB::hpicfPortCopyNameEntry,,not-accessible,,current,,An entry in the hpicfPortCopyNameEntry contains Mirroring Destination name string.
.1.3.6.1.4.1.11.2.14.11.5.1.7.1.29.1.4.1.1,HP-SWITCH-BASIC-CONFIG-MIB::hpicfPortCopyName,OCTET,read-create,,current,,Mirroring Destination name string.
.1.3.6.1.4.1.11.2.14.11.5.1.7.1.29.1.5,HP-SWITCH-BASIC-CONFIG-MIB::hpSwitchDefaultLogon,INTEGER,read-write,,current,cli(0):menu(1),This indicates whether switch should boot to CLI (default) or menu. The changes takes effect after rebooting the switch.
.1.3.6.1.4.1.11.2.14.11.5.1.7.1.29.1.6,HP-SWITCH-BASIC-CONFIG-MIB::hpSwitchChassisLocateTable,,not-accessible,,current,,This table is contains information about the current state of all the chassis locate LEDs.
.1.3.6.1.4.1.11.2.14.11.5.1.7.1.29.1.6.1,HP-SWITCH-BASIC-CONFIG-MIB::hpSwitchChassisLocateEntry,,not-accessible,entPhysicalIndex,current,,Contains information about the current state of a particular chassis LED.
.1.3.6.1.4.1.11.2.14.11.5.1.7.1.29.1.6.1.1,HP-SWITCH-BASIC-CONFIG-MIB::hpSwitchChassisLocateState,INTEGER,read-write,,current,off(1):on(2):blink(3),The current state of the chassis LED. The state is set to 'off' by default.
.1.3.6.1.4.1.11.2.14.11.5.1.7.1.29.1.6.1.2,HP-SWITCH-BASIC-CONFIG-MIB::hpSwitchChassisLocateDuration,Integer32,read-write,,current,,The duration for which the current LED state is to be maintained. The minimum value is 60 and the maximum value is 86400. The 'off' state does not require a duration. A get request for the duration  when the state is 'off' will return the default  duration value.
.1.3.6.1.4.1.11.2.14.11.5.1.7.1.29.1.7,HP-SWITCH-BASIC-CONFIG-MIB::hpSwitchModules,,,,,,
.1.3.6.1.4.1.11.2.14.11.5.1.7.1.29.1.7.1,HP-SWITCH-BASIC-CONFIG-MIB::hpSwitchModuleInfoTable,,not-accessible,,current,,A table describing all modules  that can be supported by the device.
.1.3.6.1.4.1.11.2.14.11.5.1.7.1.29.1.7.1.1,HP-SWITCH-BASIC-CONFIG-MIB::hpSwitchModuleInfoEntry,,not-accessible,hpSwitchModuleInfoModId,current,,The information regarding the module type in the switch. This table lists all the  supported module types. The supported module type  will have the equivalent module name.
.1.3.6.1.4.1.11.2.14.11.5.1.7.1.29.1.7.1.1.1,HP-SWITCH-BASIC-CONFIG-MIB::hpSwitchModuleInfoModId,Integer32,not-accessible,,current,,The module Id. This is a sequence number
.1.3.6.1.4.1.11.2.14.11.5.1.7.1.29.1.7.1.1.2,HP-SWITCH-BASIC-CONFIG-MIB::hpSwitchModuleInfoModType,OCTET,read-only,,current,,The module type in the switch. This is the Jnumber string that is supported on the device.
.1.3.6.1.4.1.11.2.14.11.5.1.7.1.29.1.7.2,HP-SWITCH-BASIC-CONFIG-MIB::hpSwitchModuleConfigTable,,not-accessible,,current,,A table to configure the module  type for a specific module.
.1.3.6.1.4.1.11.2.14.11.5.1.7.1.29.1.7.2.1,HP-SWITCH-BASIC-CONFIG-MIB::hpSwitchModuleConfigEntry,,not-accessible,entPhysicalIndex,current,,Configuration of module type for a specific module. Configuration of  module type on an already configured  module is not allowed.
.1.3.6.1.4.1.11.2.14.11.5.1.7.1.29.1.7.2.1.1,HP-SWITCH-BASIC-CONFIG-MIB::hpSwitchModuleConfigModType,OCTET,read-write,,current,,The module type in the switch. This is the Jnumber supported  on the device. The supported  types are listed in hpSwitchModuleInfoTable.
.1.3.6.1.4.1.11.2.14.11.5.1.7.1.29.1.7.2.1.2,HP-SWITCH-BASIC-CONFIG-MIB::hpSwitchModuleConfigModName,OCTET,read-only,,current,,The module name in the switch.
.1.3.6.1.4.1.11.2.14.11.5.1.7.1.29.1.8,HP-SWITCH-BASIC-CONFIG-MIB::hpSwitchWebSupportUrl,OCTET,read-write,,current,,URL for the web interface support page.
.1.3.6.1.4.1.11.2.14.11.5.1.7.1.29.1.9,HP-SWITCH-BASIC-CONFIG-MIB::hpSwitchStartupConfigSeqNum,Unsigned32,read-write,,current,,This is the value of the global startup-config  sequential number. Every change to startup-config  increments the value by 1. Must be stored in  non-volatile memory to be carried over the system boot.
.1.3.6.1.4.1.11.2.14.11.5.1.7.1.29.1.10,HP-SWITCH-BASIC-CONFIG-MIB::hpSwitchStartupConfigNotifyEnable,INTEGER,read-write,,current,enable(1):disable(2),Indicates whether the SNMP entity is permitted to generate hpSwitchStartupConfigChange notifications. Default is disabled.
.1.3.6.1.4.1.11.2.14.11.5.1.7.1.29.1.11,HP-SWITCH-BASIC-CONFIG-MIB::hpSwitchImplicitConfigSave,INTEGER,read-write,,current,enable(1):disable(2),This object is to enable/disable the implicit write-memory (saving the running-config to the flash) done after every successful SNMP  set operation. When set to 'enable', config changes are written to  the flash which results in slow performance for  these set operations.  To get faster processing while doing large number  of continuous SNMP set operations, this object can be set to 'disable'; And,once the SNMP set operations are done, 'hpSwitchSaveConfig' MIB object can be used  to save the running-config to the flash. This object will not be saved across a re-boot, and will always be set to 'enable' at boot. It is advisable to set this MIB object to  'disable' only when there are a lot of continuous SNMP set operations e.g. a script  executing a large number of SNMP set operations.
.1.3.6.1.4.1.11.2.14.11.5.1.7.1.29.1.12,HP-SWITCH-BASIC-CONFIG-MIB::hpSwitchRunningCfgChgObjects,,,,,,
.1.3.6.1.4.1.11.2.14.11.5.1.7.1.29.1.12.1,HP-SWITCH-BASIC-CONFIG-MIB::hpSwitchRunningCfgChgNotifyEnable,INTEGER,read-write,,current,enable(1):disable(2),Indicates whether the SNMP entity is permitted to generate hpSwitchRunningConfigChange notifications. Default is disabled.
.1.3.6.1.4.1.11.2.14.11.5.1.7.1.29.1.12.2,HP-SWITCH-BASIC-CONFIG-MIB::hpSwitchRunningCfgChgTransmitInterval,Unsigned32,read-write,,current,,Specifies the transmission interval in seconds for sending running config change traps. Only one running config change trap is sent in this  time interval. Default value is 0, indicating there is no limit on sending running config change traps.
.1.3.6.1.4.1.11.2.14.11.5.1.7.1.29.1.12.3,HP-SWITCH-BASIC-CONFIG-MIB::hpSwitchRunningCfgChgLatestDateAndTime,OCTET,read-only,,current,,Indicates the date and time of the  most recent running config change.
.1.3.6.1.4.1.11.2.14.11.5.1.7.1.29.1.12.4,HP-SWITCH-BASIC-CONFIG-MIB::hpSwitchRunningCfgChgCount,Counter32,read-only,,current,,The total number of running config changes since last reboot.
.1.3.6.1.4.1.11.2.14.11.5.1.7.1.29.1.12.5,HP-SWITCH-BASIC-CONFIG-MIB::hpSwitchRunningCfgChgEntriesBumped,Counter32,read-only,,current,,The number of times the oldest entry in hpSwitchRunningCfgChgTable was discarded to make room for a new entry.
.1.3.6.1.4.1.11.2.14.11.5.1.7.1.29.1.12.6,HP-SWITCH-BASIC-CONFIG-MIB::hpSwitchRunningCfgChgEventTable,,not-accessible,,current,,A table of latest 32 running configuration change  events.
.1.3.6.1.4.1.11.2.14.11.5.1.7.1.29.1.12.6.1,HP-SWITCH-BASIC-CONFIG-MIB::hpSwitchRunningCfgChgEventEntry,,not-accessible,hpSwitchRunningCfgChgEventTableIndex,current,,Information about running configuration  change event on this switch.
.1.3.6.1.4.1.11.2.14.11.5.1.7.1.29.1.12.6.1.1,HP-SWITCH-BASIC-CONFIG-MIB::hpSwitchRunningCfgChgEventTableIndex,Integer32,not-accessible,,current,,The Index for hpSwitchRunningCfgChgTable.
.1.3.6.1.4.1.11.2.14.11.5.1.7.1.29.1.12.6.1.2,HP-SWITCH-BASIC-CONFIG-MIB::hpSwitchRunningCfgChgEventId,Unsigned32,read-only,,current,,Identifies a specific running config change.  Monotonically increasing values will be  assigned by the system to each event as it  occurs. If the system is reset, these event ID  values will be reset as well. 
.1.3.6.1.4.1.11.2.14.11.5.1.7.1.29.1.12.6.1.3,HP-SWITCH-BASIC-CONFIG-MIB::hpSwitchRunningCfgChgEventMethod,INTEGER,read-only,,current,unknown(0):cli(1):menu(2):snmp(3):webUI(4):internalEvent(5),Indicates the source through which change to  running config was initiated.
.1.3.6.1.4.1.11.2.14.11.5.1.7.1.29.1.12.6.1.4,HP-SWITCH-BASIC-CONFIG-MIB::hpSwitchRunningCfgChgEventSourceIPAddrType,INTEGER,read-only,,current,unknown(0):ipv4(1):ipv6(2):ipv4z(3):ipv6z(4):dns(16),Indicates the source address type of network agent which made a change. This object value is set to an address type of unknown when not applicable.
.1.3.6.1.4.1.11.2.14.11.5.1.7.1.29.1.12.6.1.5,HP-SWITCH-BASIC-CONFIG-MIB::hpSwitchRunningCfgChgEventSourceIPAddr,OCTET,read-only,,current,,Indicates the source address of network agent which made a running config change. The value  is an address of length 0 (unknown(0)) if not  available or not applicable.
.1.3.6.1.4.1.11.2.14.11.5.1.7.1.29.1.12.6.1.6,HP-SWITCH-BASIC-CONFIG-MIB::hpSwitchRunningCfgChgEventUsername,OCTET,read-only,,current,,Indicates the username of the user making the change the change to running config. Empty string (length 0) if username is not available or not applicable.
.1.3.6.1.4.1.11.2.14.11.5.1.7.1.29.1.12.6.1.7,HP-SWITCH-BASIC-CONFIG-MIB::hpSwitchRunningCfgChgEventDateAndTime,OCTET,read-only,,current,,Indicates the date and time of the running config change.
.1.3.6.1.4.1.11.2.14.11.5.1.7.1.29.1.13,HP-SWITCH-BASIC-CONFIG-MIB::hpSwitchSecureModeLevel,INTEGER,read-write,,current,error(0):standard(1):enhanced(16),Indicates current Secure-Mode Level of switch  standard : switch operates with standard security  capabilities. enhanced : switch operates with enhanced security  capabilities for configurations to satisfy FIPS  140-2 requirements.The default level is standard.
.1.3.6.1.4.1.11.2.14.11.5.1.7.1.29.1.14,HP-SWITCH-BASIC-CONFIG-MIB::hpSwitchCdpRunMode,INTEGER,read-write,,current,rxonly(1):passthru(2),Indicates the mode of CDP processing. This variable has no effect when CDP is disabled (cdpGlobalRun = FALSE).
.1.3.6.1.4.1.11.2.14.11.5.1.7.1.29.2,HP-SWITCH-BASIC-CONFIG-MIB::hpSwitchBasicConfigConformance,,,,,,
.1.3.6.1.4.1.11.2.14.11.5.1.7.1.29.2.1,HP-SWITCH-BASIC-CONFIG-MIB::hpSwitchBasicConfigCompliances,,,,,,
.1.3.6.1.4.1.11.2.14.11.5.1.7.1.29.2.1.1,HP-SWITCH-BASIC-CONFIG-MIB::hpSwitchBasicConfigCompliance,,,,,,The compliance statement for config entities  which implements basic configuration of the switch.
.1.3.6.1.4.1.11.2.14.11.5.1.7.1.29.2.1.2,HP-SWITCH-BASIC-CONFIG-MIB::hpSwitchBasicConfigCompliance2,,,,,,The compliance statement for config entities  which implements basic configuration of the switch.
.1.3.6.1.4.1.11.2.14.11.5.1.7.1.29.2.1.3,HP-SWITCH-BASIC-CONFIG-MIB::hpSwitchBasicConfigCompliance3,,,,,,The compliance statement for config entities  which implements basic configuration of the switch.
.1.3.6.1.4.1.11.2.14.11.5.1.7.1.29.2.1.4,HP-SWITCH-BASIC-CONFIG-MIB::hpSwitchBasicConfigCompliance4,,,,,,The compliance statement for config entities which implements basic configuration of the switch.
.1.3.6.1.4.1.11.2.14.11.5.1.7.1.29.2.2,HP-SWITCH-BASIC-CONFIG-MIB::hpSwitchBasicConfigGroups,,,,,,
.1.3.6.1.4.1.11.2.14.11.5.1.7.1.29.2.2.1,HP-SWITCH-BASIC-CONFIG-MIB::hpSwitchBasicConfigGroup,,,,,,A collection of objects for basic configuration of the switch.
.1.3.6.1.4.1.11.2.14.11.5.1.7.1.29.2.2.2,HP-SWITCH-BASIC-CONFIG-MIB::hpSwitchAliasGroup,,,,,,A collection of objects for alias configuration for CLI commands.
.1.3.6.1.4.1.11.2.14.11.5.1.7.1.29.2.2.3,HP-SWITCH-BASIC-CONFIG-MIB::hpicfBridgeFilterConfigGroup,,,,,,A collection of objects for source-port filter configuration.
.1.3.6.1.4.1.11.2.14.11.5.1.7.1.29.2.2.4,HP-SWITCH-BASIC-CONFIG-MIB::hpicfPortCopyNameGroup,,,,,,A collection of objects for mirror configuration for CLI commands.
.1.3.6.1.4.1.11.2.14.11.5.1.7.1.29.2.2.5,HP-SWITCH-BASIC-CONFIG-MIB::hpSwitchAclLogtimeoutGroup,,,,,,A collection of objects for ACL configuration of the switch.
.1.3.6.1.4.1.11.2.14.11.5.1.7.1.29.2.2.6,HP-SWITCH-BASIC-CONFIG-MIB::hpSwitchIgmpProxyDomainConfigGroup,,,,,,A collection of objects for IGMP proxy domain configuration.
.1.3.6.1.4.1.11.2.14.11.5.1.7.1.29.2.2.7,HP-SWITCH-BASIC-CONFIG-MIB::hpSwitchChassisLocateGroup,,,,,,A collection of objects for chassis locate configuration.
.1.3.6.1.4.1.11.2.14.11.5.1.7.1.29.2.2.8,HP-SWITCH-BASIC-CONFIG-MIB::hpSwitchModuleGroup,,,,,,A collection of objects for switch module configuration.
.1.3.6.1.4.1.11.2.14.11.5.1.7.1.29.2.2.9,HP-SWITCH-BASIC-CONFIG-MIB::hpSwitchStartupConfigChangeGroup,,,,,,A collection of objects for startup config change notifications.
.1.3.6.1.4.1.11.2.14.11.5.1.7.1.29.2.2.10,HP-SWITCH-BASIC-CONFIG-MIB::hpSwitchBasicConfigGroup2,,,,,,A collection of objects for switch basic configurations.
.1.3.6.1.4.1.11.2.14.11.5.1.7.1.29.2.2.11,HP-SWITCH-BASIC-CONFIG-MIB::hpSwitchRunningCfgChgGroup,,,,,,A collection of objects for running config change details and its notification.
.1.3.6.1.4.1.11.2.14.11.5.1.7.1.29.2.2.12,HP-SWITCH-BASIC-CONFIG-MIB::hpSwitchBasicConfigGroup3,,,,,,A collection of objects for switch Secure mode  configurations.
.1.3.6.1.4.1.11.2.14.11.5.1.7.1.29.2.2.13,HP-SWITCH-BASIC-CONFIG-MIB::hpSwitchCdpConfigGroup,,,,,,A collection of objects for Cisco discovery protocol mode configurations.
.1.3.6.1.4.1.11.2.14.11.5.1.7.1.29.2.3,HP-SWITCH-BASIC-CONFIG-MIB::hpSwitchBasicNotificationGroups,,,,,,
.1.3.6.1.4.1.11.2.14.11.5.1.7.1.29.2.3.1,HP-SWITCH-BASIC-CONFIG-MIB::hpSwitchBasicNotificationGroup,,,,,,Switch Basic Config notifications
.1.3.6.1.4.1.11.2.14.11.5.1.7.1.31,CONFIG-MIB::hpSwitchDSCPRateLimitConfig,,,,,,
.1.3.6.1.4.1.11.2.14.11.5.1.7.1.31.1,CONFIG-MIB::hpSwitchDSCPRateLimitConfigTable,,not-accessible,,mandatory,,A table containing information about DSCP-based rate limits and ports on which they are applied.
.1.3.6.1.4.1.11.2.14.11.5.1.7.1.31.1.1,CONFIG-MIB::hpSwitchDSCPRateLimitConfigEntry,,not-accessible,hpSwitchDSCPRateLimitIndex,mandatory,,Information about a single DSCP-based rate limit.
.1.3.6.1.4.1.11.2.14.11.5.1.7.1.31.1.1.1,CONFIG-MIB::hpSwitchDSCPRateLimitIndex,Integer32,not-accessible,,mandatory,,An index into the DSCP rate limit table. The value is a DSCP codepoint.
.1.3.6.1.4.1.11.2.14.11.5.1.7.1.31.1.1.2,CONFIG-MIB::hpSwitchDSCPRateLimitKbps,INTEGER,read-write,,mandatory,,The rate limit in kilobits per second for a row of the DSCP rate limit table. Incoming traffic with the DSCP field of the IP header matching the index of the row will be limited to this rate and excess traffic will be dropped. On some devices, the actual traffic rate allowed may be slightly higher or lower due to hardware limitations. A value of -1 indicates no limit and is the default. Setting a value of -1 will clear all rate limits for the codepoint. The rate limit is only applied on the ports set in the hpSwitchDSCPRateLimitPorts column of the row.
.1.3.6.1.4.1.11.2.14.11.5.1.7.1.31.1.1.3,CONFIG-MIB::hpSwitchDSCPRateLimitPorts,OCTET,read-write,,mandatory,,The applied ports for a row of the DSCP rate limit table. The rate limit from the hpSwitchDSCPRateLimitKbps column of the row will be applied on the logical ports specified. A rate limit may not be applied to individual ports that are members of a trunk, but must be applied to the entire trunk instead. It is an error to apply a DSCP rate limit to any ports before setting hpSwitchDSCPRateLimitKbps to a value other than -1. When the port list for a row is cleared, the hpSwitchDSCPRateLimitKbps column is set to the default of -1.
.1.3.6.1.4.1.11.2.14.11.5.1.7.1.33,CONFIG-MIB::hpSwitchTcpPushPreserve,,,,,,
.1.3.6.1.4.1.11.2.14.11.5.1.7.1.33.1,CONFIG-MIB::hpSwitchTcpPushPreserveConfig,INTEGER,read-write,,mandatory,enable(1):disable(2),This object is used to enable the TCP Push Preserve functionality on the device. The TCP Push Preserve functionality determines the flow of the TCP packets with the push flag set. When this feature is enabled and the egress queue is full, the TCP packets with the push flag set are lined up at the head of the ingress queue for egress queue space. This might delay the subsequent incoming packets in the same queue. When this feature is disabled and the egress queue is full, the TCP packets with the push flag set placed in the ingress queue are dropped from the head of the ingress queue.  By default, the TCP Push Preserve functionality is enabled on the device.
.1.3.6.1.4.1.11.2.14.11.5.1.7.1.34,CONFIG-MIB::hpSwitchIfMau,,,,,,
.1.3.6.1.4.1.11.2.14.11.5.1.7.1.34.1,CONFIG-MIB::hpSwitchIfMauTypeListBits,BITS,read-only,,mandatory,b2500baseTFD(79):b5000baseTFD(80):b40GbaseeSR4(81),This object is used to generate the MauType values for 2.5G and 5G port speed.
.1.3.6.1.4.1.11.2.14.11.5.1.7.1.34.2,CONFIG-MIB::hpSwitchIfMauAutoNegCapabilityBits,BITS,read-only,,mandatory,b40GbaseSR4(23):b40GbaseLR4(24):b2500baseTFD(25):b5000baseTFD(26):b40GbaseeSR4(27),This object is used to generate the MauAutoNegCapBits values for 2.5G and 5G port speed.
.1.3.6.1.4.1.11.2.14.11.5.1.7.1.34.3,CONFIG-MIB::hpSwitchIfMauAutoNegCapAdvertisedBits,BITS,read-only,,mandatory,b40GbaseSR4(23):b40GbaseLR4(24):b2500baseTFD(25):b5000baseTFD(26):b40GbaseeSR4(27),This object is used to generate the MauAutoNegCapBits values for 2.5G and 5G port speed.
.1.3.6.1.4.1.11.2.14.11.5.1.7.1.34.4,CONFIG-MIB::hpSwitchIfMauAutoNegCapReceivedBits,BITS,read-only,,mandatory,b40GbaseSR4(23):b40GbaseLR4(24):b2500baseTFD(25):b5000baseTFD(26):b40GbaseeSR4(27),This object is used to generate the MauAutoNegCapBits values for 2.5G and 5G port speed.
.1.3.6.1.4.1.11.2.14.11.5.1.9,HP-ICF-OID::hpSwitchStatistics,,,,,,
.1.3.6.1.4.1.11.2.14.11.5.1.9.1,STATISTICS-MIB::hpSwitchIpxStat,,,,,,
.1.3.6.1.4.1.11.2.14.11.5.1.9.1.1,STATISTICS-MIB::hpSwitchIpxStatTable,,not-accessible,,mandatory,,A table that contains information about the operational IPX status of the virtual LAN in this device.
.1.3.6.1.4.1.11.2.14.11.5.1.9.1.1.1,STATISTICS-MIB::hpSwitchIpxStatEntry,,not-accessible,hpSwitchIpxStatIndex,mandatory,,Information about the operational IPX status of a virtual LAN in this device.
.1.3.6.1.4.1.11.2.14.11.5.1.9.1.1.1.1,STATISTICS-MIB::hpSwitchIpxStatIndex,INTEGER,read-only,,mandatory,,An index that uniquely identifies the operational IPX status of a virtual LAN for which this entry contains information.
.1.3.6.1.4.1.11.2.14.11.5.1.9.1.1.1.2,STATISTICS-MIB::hpSwitchIpxStatNodeAddr,OCTET,read-only,,mandatory,,The current IPX node address of this virtual LAN.
.1.3.6.1.4.1.11.2.14.11.5.1.9.1.1.1.3,STATISTICS-MIB::hpSwitchIpxStatGatewayAddr,OCTET,read-only,,mandatory,,The current IPX node address of the gateway for this virtual LAN.
.1.3.6.1.4.1.11.2.14.11.5.1.9.1.1.1.4,STATISTICS-MIB::hpSwitchIpxStatGatewayEncap,INTEGER,read-only,,mandatory,ethernetII(1):ieee8022(2):snap(3):ieee8023Raw(4):noGateway(5),The current type of encapsulation of the gateway.
.1.3.6.1.4.1.11.2.14.11.5.1.9.1.1.1.5,STATISTICS-MIB::hpSwitchIpxStatAdminStatus,INTEGER,read-only,,mandatory,enable(1):disable(2),The operational status of the IPX protocol entity.
.1.3.6.1.4.1.11.2.14.11.5.1.9.2,STATISTICS-MIB::hpSwitchIpStat,,,,,,
.1.3.6.1.4.1.11.2.14.11.5.1.9.2.1,STATISTICS-MIB::hpSwitchIpStatTimepAdminStatus,INTEGER,read-only,,obsolete,enable(1):disable(2),The operational status of the Time protocol.
.1.3.6.1.4.1.11.2.14.11.5.1.9.2.2,STATISTICS-MIB::hpSwitchIpStatTimepServerAddr,IpAddress,read-only,,obsolete,,The current IP address of the Time server.
.1.3.6.1.4.1.11.2.14.11.5.1.9.2.3,STATISTICS-MIB::hpSwitchIpStatTimepPollInterval,INTEGER,read-only,,obsolete,,The current client poll interval of the Time server in minute.
.1.3.6.1.4.1.11.2.14.11.5.1.9.2.4,STATISTICS-MIB::hpSwitchIpStatTable,,not-accessible,,obsolete,,A table that contains information about the current IP status of the virtual LAN in this device.
.1.3.6.1.4.1.11.2.14.11.5.1.9.2.4.1,STATISTICS-MIB::hpSwitchIpStatEntry,,not-accessible,hpSwitchIpStatIndex,obsolete,,Information about the IP status of a specific virtual LAN in this device.
.1.3.6.1.4.1.11.2.14.11.5.1.9.2.4.1.1,STATISTICS-MIB::hpSwitchIpStatIndex,INTEGER,read-only,,obsolete,,An index that uniquely identifies the IP status of a virtual LAN for which this entry contains information.
.1.3.6.1.4.1.11.2.14.11.5.1.9.2.4.1.2,STATISTICS-MIB::hpSwitchIpStatAddr,IpAddress,read-only,,obsolete,,The current IP address of this Virtual LAN.
.1.3.6.1.4.1.11.2.14.11.5.1.9.2.4.1.3,STATISTICS-MIB::hpSwitchIpStatMask,IpAddress,read-only,,obsolete,,The current IP subnet mask of this virtual LAN.
.1.3.6.1.4.1.11.2.14.11.5.1.9.2.4.1.4,STATISTICS-MIB::hpSwitchIpStatGatewayAddr,IpAddress,read-only,,obsolete,,The current IP address of the gateway for this virtual LAN.
.1.3.6.1.4.1.11.2.14.11.5.1.9.2.4.1.5,STATISTICS-MIB::hpSwitchIpStatAdminStatus,INTEGER,read-only,,obsolete,enable(1):disable(2):bootp(3),The operational status of the IP protocol for this virtual LAN. If the value of this variable is 3, the IP protocol entity will utilize BOOTP during initialization.
.1.3.6.1.4.1.11.2.14.11.5.1.9.4,STATISTICS-MIB::hpSwitchFdbInfo,,,,,,
.1.3.6.1.4.1.11.2.14.11.5.1.9.4.1,STATISTICS-MIB::hpSwitchVlanFdbAddrTable,,not-accessible,,mandatory,,A table that contains information about unicast entries for which the VLAN has forwarding and/or filtering information. This information is used by the VLAN bridging function in determining how to propagate a received frame.
.1.3.6.1.4.1.11.2.14.11.5.1.9.4.1.1,STATISTICS-MIB::hpSwitchVlanFdbAddrEntry,,not-accessible,hpSwitchVlanFdbId:hpSwitchVlanFdbAddress,mandatory,,Information about a specific unicast MAC address for which the VLAN has some forwarding and/or filtering information.
.1.3.6.1.4.1.11.2.14.11.5.1.9.4.1.1.1,STATISTICS-MIB::hpSwitchVlanFdbId,INTEGER,read-only,,mandatory,,An index that uniquely identifies a virtual LAN for which this entry contains information.
.1.3.6.1.4.1.11.2.14.11.5.1.9.4.1.1.2,STATISTICS-MIB::hpSwitchVlanFdbAddress,OCTET,read-only,,mandatory,,A unicast MAC address for which the VLAN has forwarding and/or filtering information.
.1.3.6.1.4.1.11.2.14.11.5.1.9.4.1.1.3,STATISTICS-MIB::hpSwitchVlanFdbPort,INTEGER,read-only,,mandatory,,The port number of the port on which a frame having a source address equal to the value of the corresponding instance of hpSwitchVlanFdbAddress has been seen.
.1.3.6.1.4.1.11.2.14.11.5.1.9.4.2,STATISTICS-MIB::hpSwitchPortFdbAddrTable,,not-accessible,,mandatory,,A table that contains information about unicast entries for which the port has forwarding and/or filtering information. This information is used by the bridging function in determining how to propagate a received frame.
.1.3.6.1.4.1.11.2.14.11.5.1.9.4.2.1,STATISTICS-MIB::hpSwitchPortFdbAddrEntry,,not-accessible,hpSwitchPortFdbId:hpSwitchPortFdbAddress,mandatory,,Information about a specific unicast MAC address for which the port has some forwarding and/or filtering information.
.1.3.6.1.4.1.11.2.14.11.5.1.9.4.2.1.1,STATISTICS-MIB::hpSwitchPortFdbId,INTEGER,read-only,,mandatory,,The ifIndex value which uniquely identifies a row in the Interfaces Table. The corresponding row in the Interfaces Table must exist prior to the index being used in this table.
.1.3.6.1.4.1.11.2.14.11.5.1.9.4.2.1.2,STATISTICS-MIB::hpSwitchPortFdbAddress,OCTET,read-only,,mandatory,,A unicast MAC address for which the port has forwarding and/or filtering information.
.1.3.6.1.4.1.11.2.14.11.5.1.9.4.2.1.3,STATISTICS-MIB::hpSwitchPortFdbVlanId,INTEGER,read-only,,deprecated,,The VLAN ID to which this entry belongs. Deprecated - hpSwitchPortFdbVidList should be used instead.
.1.3.6.1.4.1.11.2.14.11.5.1.9.4.2.1.4,STATISTICS-MIB::hpSwitchPortFdbVidList,OCTET,read-only,,mandatory,,A VidList of VLAN IDs to which this entry belongs.
.1.3.6.1.4.1.11.2.14.11.5.1.9.5,STATISTICS-MIB::hpSwitchStpStat,,,,,,
.1.3.6.1.4.1.11.2.14.11.5.1.9.5.1,STATISTICS-MIB::hpSwitchStpStatAdminStatus,INTEGER,read-only,,mandatory,enable(1):disable(2),The operational status of the spanning tree protocol.
.1.3.6.1.4.1.11.2.14.11.5.1.9.6,STATISTICS-MIB::hpSwitchMiscStat,,,,,,
.1.3.6.1.4.1.11.2.14.11.5.1.9.6.1,STATISTICS-MIB::hpSwitchCpuStat,INTEGER,read-only,,mandatory,,The CPU utilization in percent(%).
.1.3.6.1.4.1.11.2.14.11.5.1.9.7,STATISTICS-MIB::hpSwitchFddiIpFragStat,,,,,,
.1.3.6.1.4.1.11.2.14.11.5.1.9.7.1,STATISTICS-MIB::hpSwitchFddiIpFragStatTable,,not-accessible,,mandatory,,A list of IP fragmentation statistics  for the FDDI cards in the switch.
.1.3.6.1.4.1.11.2.14.11.5.1.9.7.1.1,STATISTICS-MIB::hpSwitchFddiIpFragStatEntry,,not-accessible,hpSwitchFddiIpFragStatIndex,mandatory,,An Fddi IP fragmentation entry which is containing statistics for the FDDI cards in the switch.
.1.3.6.1.4.1.11.2.14.11.5.1.9.7.1.1.1,STATISTICS-MIB::hpSwitchFddiIpFragStatIndex,INTEGER,read-only,,mandatory,,A unique value for each FDDI Card.  The value for each FDDI card must remain constant  at least from one re-initialization of the entity's  network management system to the next  re-initialization.
.1.3.6.1.4.1.11.2.14.11.5.1.9.7.1.1.2,STATISTICS-MIB::hpSwitchFddiIpFragFramesFragmented,Counter32,read-only,,mandatory,,Number of FDDI Frames which get fragmented when they  are larger than Ethernet Frame size, 1518 bytes.
.1.3.6.1.4.1.11.2.14.11.5.1.9.7.1.1.3,STATISTICS-MIB::hpSwitchFddiIpFragFramesCreated,Counter32,read-only,,mandatory,,Number of inbound FDDI frames which get created when they larger than Ethernet Frame size, 1518 bytes.
.1.3.6.1.4.1.11.2.14.11.5.1.9.7.1.1.4,STATISTICS-MIB::hpSwitchFddiIpFragFrameErrors,Counter32,read-only,,mandatory,,Number of large inbound FDDI frames that contains error which preventing them from being fragmented when they are larger than Ethernet Frame size, 1518 bytes. Or number of large frames which are dropped because the FDDI IP fragmentation is disabled 
.1.3.6.1.4.1.11.2.14.11.5.1.9.8,STATISTICS-MIB::hpSwitchFddiSystemStat,,,,,,
.1.3.6.1.4.1.11.2.14.11.5.1.9.8.1,STATISTICS-MIB::hpSwitchFddiSystemStatTable,,not-accessible,,mandatory,,A list of system infomations and statistics  for the FDDI cards in the switch.
.1.3.6.1.4.1.11.2.14.11.5.1.9.8.1.1,STATISTICS-MIB::hpSwitchFddiSystemStatEntry,,not-accessible,hpSwitchFddiSystemStatIndex,mandatory,,An Fddi system entry which is  containing statistics for the FDDI cards in the switch.
.1.3.6.1.4.1.11.2.14.11.5.1.9.8.1.1.1,STATISTICS-MIB::hpSwitchFddiSystemStatIndex,INTEGER,read-only,,mandatory,,A unique value for each FDDI Card.  The value for each FDDI card must remain constant  at least from one re-initialization of the entity's  network management system to the next  re-initialization.
.1.3.6.1.4.1.11.2.14.11.5.1.9.8.1.1.2,STATISTICS-MIB::hpSwitchFddiSystemOsVersion,OCTET,read-only,,mandatory,,Contains the operating code version number (also known as software or firmware). For example, a software version such as A.08.01 is described as follows: A the function set available in your switch 08 the common release number 01 updates to the current common release
.1.3.6.1.4.1.11.2.14.11.5.1.9.8.1.1.3,STATISTICS-MIB::hpSwitchFddiSystemRomVersion,OCTET,read-only,,mandatory,,Contains the ROM version number (such as A.08.01 is described as follows: A the function set available in your router 08 the common release number 01 updates to the current common release
.1.3.6.1.4.1.11.2.14.11.5.1.9.8.1.1.4,STATISTICS-MIB::hpSwitchFddiSystemMemoryTotal,INTEGER,read-only,,mandatory,,The number of currently installed bytes.
.1.3.6.1.4.1.11.2.14.11.5.1.9.8.1.1.5,STATISTICS-MIB::hpSwitchFddiSystemMemoryFree,INTEGER,read-only,,mandatory,,The number of available (unallocated) bytes.
.1.3.6.1.4.1.11.2.14.11.5.1.9.8.1.1.6,STATISTICS-MIB::hpSwitchFddiSystemCpuUtil,INTEGER,read-only,,mandatory,,The CPU utilization in percent(%).
.1.3.6.1.4.1.11.2.14.11.5.1.9.8.1.1.7,STATISTICS-MIB::hpSwitchFddiSystemBuildDirectory,OCTET,read-only,,mandatory,,The Build directory the FDDI firmware image 
.1.3.6.1.4.1.11.2.14.11.5.1.9.8.1.1.8,STATISTICS-MIB::hpSwitchFddiSystemBuildDate,OCTET,read-only,,mandatory,,The Build date and time of the FDDI firmware image
.1.3.6.1.4.1.11.2.14.11.5.1.9.8.1.1.9,STATISTICS-MIB::hpSwitchFddiSystemBuildNumber,OCTET,read-only,,mandatory,,The Build number of the FDDI firmware image
.1.3.6.1.4.1.11.2.14.11.5.1.9.9,STATISTICS-MIB::hpABCStats,,,,,,
.1.3.6.1.4.1.11.2.14.11.5.1.9.9.1,STATISTICS-MIB::hpABCStatsTable,,not-accessible,,mandatory,,A table that contains statistic information about Automatic Broadcast Control on any given VLAN on the switch.
.1.3.6.1.4.1.11.2.14.11.5.1.9.9.1.1,STATISTICS-MIB::hpABCStatsEntry,,not-accessible,hpABCStatsVlanIndex:hpABCStatsPortIndex,mandatory,,The information associated with each row in the ABC Statistics Table.
.1.3.6.1.4.1.11.2.14.11.5.1.9.9.1.1.1,STATISTICS-MIB::hpABCStatsVlanIndex,INTEGER,read-only,,mandatory,,The value which uniquely identifies configuration of a virtual LAN for which entry contains information.
.1.3.6.1.4.1.11.2.14.11.5.1.9.9.1.1.2,STATISTICS-MIB::hpABCStatsPortIndex,INTEGER,read-only,,mandatory,,The ifIndex value which uniquely identifies a row in the Interfaces Table.
.1.3.6.1.4.1.11.2.14.11.5.1.9.9.1.1.3,STATISTICS-MIB::hpABCStatsPortType,INTEGER,read-only,,mandatory,other(1):none(2):unknown(3):ethernetCsmacd(6):iso88023Csmacd(7):fddi(15):atm(37):propMultiplexor(54):ieee80212(55):fastEther(62):fastEtherFX(69):fastEtherFX-sfp(70):tenGSFP-SR(112):tenGSFP-LR(113):tenGSFP-ER(114):tenGSFP-LRM(115):tenGSFP-LX4(116):gigabitEthernetSX(117):gigabitEthernetLX(118):gigabitEthernetT(119):gigabitEthernetStk(120):gigabitEthernetLH(121):tenGbE-CX4(122):gigabitEthernetESP(123):tenGbE-SR(124):tenGbE-ER(125):tenGbE-LR(126):gigabitEthernetT-sfp(127):fastEtherGEN(128):gigabitEthernetGEN(129):tenGbE-GEN(130):fastEtherBX-D(131):fastEtherBX-U(132):gigabitEthernetBX-D(133):gigabitEthernetBX-U(134):tenGbE-LRM(135):sFP-PLUS-SR(136):sFP-PLUS-LR(137):sFP-PLUS-LRM(138):sFP-PLUS-DAC(139):sFP-PLUS-DA1(140):sFP-PLUS-DA2(141):sFP-PLUS-DA3(142):sFP-PLUS-DA5(143):sFP-PLUS-DA7(144):sFP-PLUS-DA10(145):sFP-PLUS-DA15(146):sFP-PLUS-DA20(147):tenGbE-T(148):tenGbE-TSH(149):tenGbE-TLH(150):tenGbE-STK(151):xFP-SFP-PLUS-DAC(152):xFP-SFP-PLUS-DA1(153):xFP-SFP-PLUS-DA3(154):xFP-SFP-PLUS-DA5(155):xFP-SFP-PLUS-DA7(156):xFP-SFP-PLUS-DA10(157):tenGbE-K(158):sFP-PLUS-ER(160):sFP-CWDM1470(161):sFP-CWDM1490(162):sFP-CWDM1510(163):sFP-CWDM1530(164):sFP-CWDM1550(165):sFP-CWDM1570(166):sFP-CWDM1590(167):sFP-CWDM1610(168):tenGigabitEthernetESP(169):fourGbE-GEN(170):fortyGbE-GEN(171):qSFP-PLUS-SR4(172):qSFP-PLUS-eSR4(173):qSFP-PLUS-LR4(174):qSFP-PLUS-DA1(175):qSFP-PLUS-DA3(176):qSFP-PLUS-DA5(177):qSFP-PLUS-SPLIT-sFP-PLUS-DA1(178):qSFP-PLUS-SPLIT-sFP-PLUS-DA3(179):qSFP-PLUS-SPLIT-sFP-PLUS-DA5(180):sFP-PLUS-AO1(181):sFP-PLUS-AO2(182):sFP-PLUS-AO3(183):sFP-PLUS-AO5(184):sFP-PLUS-AO7(185):sFP-PLUS-AO10(186):sFP-PLUS-AO15(187):qSFP-PLUS-AO1(188):qSFP-PLUS-AO2(189):qSFP-PLUS-AO3(190):qSFP-PLUS-AO5(191):qSFP-PLUS-AO7(192):qSFP-PLUS-AO10(193):qSFP-PLUS-AO15(194):qSFP-PLUS-AO20(195):qSFP-PLUS-SPLIT-sFP-PLUS-AO1(196):qSFP-PLUS-SPLIT-sFP-PLUS-AO2(197):qSFP-PLUS-SPLIT-sFP-PLUS-AO3(198):qSFP-PLUS-SPLIT-sFP-PLUS-AO5(199):qSFP-PLUS-SPLIT-sFP-PLUS-AO7(200):qSFP-PLUS-SPLIT-sFP-PLUS-AO10(201):qSFP-PLUS-SPLIT-sFP-PLUS-AO15(202),The type of port.
.1.3.6.1.4.1.11.2.14.11.5.1.9.9.1.1.4,STATISTICS-MIB::hpABCStatsArpReplies,Counter32,read-only,,mandatory,,This counter reports the number of ARP responses sent out by the switch (running ABC) to proxy respond for hosts learned in the switch ARP cashe.
.1.3.6.1.4.1.11.2.14.11.5.1.9.9.1.1.5,STATISTICS-MIB::hpABCStatsIpxReplies,Counter32,read-only,,mandatory,,This counter reports the number of RIP and SAP responses sent out by the switch (running ABC) to proxy respond for routes and services learned by switch.
.1.3.6.1.4.1.11.2.14.11.5.1.9.9.1.1.6,STATISTICS-MIB::hpABCStatsIpRipControl,INTEGER,read-only,,mandatory,forwarding(1):notforwarding(2),This status field shows if IP RIP packets are being forwarded or not forwarded on the ports shown.
.1.3.6.1.4.1.11.2.14.11.5.1.9.9.1.1.7,STATISTICS-MIB::hpABCStatsIpxRipSapControl,INTEGER,read-only,,mandatory,forwarding(1):notforwarding(2),This status field shows if IPX RIP and/or IPX SAP packets are being forwarded or not forwarded on the ports shown.
.1.3.6.1.4.1.11.2.14.11.5.1.9.10,STATISTICS-MIB::hpIgmpStats,,,,,,
.1.3.6.1.4.1.11.2.14.11.5.1.9.10.1,STATISTICS-MIB::hpIgmpStatsTable,,not-accessible,,mandatory,,A table that contains statistic information about Multicast Groups on any given VLAN on the switch.
.1.3.6.1.4.1.11.2.14.11.5.1.9.10.1.1,STATISTICS-MIB::hpIgmpStatsEntry,,not-accessible,hpIgmpStatsVlanIndex:hpIgmpStatsActiveGroupAddr,mandatory,,The information associated with each member in particular multicast group.
.1.3.6.1.4.1.11.2.14.11.5.1.9.10.1.1.1,STATISTICS-MIB::hpIgmpStatsVlanIndex,INTEGER,read-only,,mandatory,,The value which uniquely identifies configuration of a virtual LAN for which entry contains information.
.1.3.6.1.4.1.11.2.14.11.5.1.9.10.1.1.2,STATISTICS-MIB::hpIgmpStatsActiveGroupAddr,IpAddress,read-only,,mandatory,,An IP Multicast Group Membership address that has been sent, via IGMP Membership Reports, through the switch to querier.
.1.3.6.1.4.1.11.2.14.11.5.1.9.10.1.1.3,STATISTICS-MIB::hpIgmpStatsReports,Counter32,read-only,,mandatory,,The number of IGMP report packets that the switch has seen for this group address.
.1.3.6.1.4.1.11.2.14.11.5.1.9.10.1.1.4,STATISTICS-MIB::hpIgmpStatsQueries,Counter32,read-only,,mandatory,,The number of IGMP query packets the switch has seen for this group address. Note: This object is based on a group, thus if a query is heard before this object's group joins, the value will be zero. It will be non-zero when an all host query, or group specific query for the associated group, is heard after the associated group has joined.
.1.3.6.1.4.1.11.2.14.11.5.1.9.10.1.1.5,STATISTICS-MIB::hpIgmpStatsQuerierAccessPort,INTEGER,read-only,,mandatory,,The port on which the switch detects IGMP query packets from the querier (device sending out query packets). If no queries are heard, the value of the object is zero and we are querier or electing to be querier. Anytime a querier besides our switch is heard the value of the object becomes the port number on which the other querier was heard and the query election process will be halted if currently running.
.1.3.6.1.4.1.11.2.14.11.5.1.9.10.2,STATISTICS-MIB::hpIgmpStatsPortTable,,not-accessible,,deprecated,,A table that contains information about status of the IGMP port configurations on this switch.
.1.3.6.1.4.1.11.2.14.11.5.1.9.10.2.1,STATISTICS-MIB::hpIgmpStatsPortEntry,,not-accessible,hpIgmpStatsActiveGroupAddr:hpIgmpStatsPortIndex,deprecated,,The information associated with status of each IGMP port configuration.
.1.3.6.1.4.1.11.2.14.11.5.1.9.10.2.1.1,STATISTICS-MIB::hpIgmpStatsPortIndex,INTEGER,read-only,,deprecated,,The ifIndex value which uniquely identifies a row in the Interfaces Table.
.1.3.6.1.4.1.11.2.14.11.5.1.9.10.2.1.2,STATISTICS-MIB::hpIgmpStatsPortType,INTEGER,read-only,,deprecated,other(1):none(2):unknown(3):ethernetCsmacd(6):iso88023Csmacd(7):fddi(15):atm(37):propMultiplexor(54):ieee80212(55):fastEther(62):fastEtherFX(69):fastEtherFX-sfp(70):tenGSFP-SR(112):tenGSFP-LR(113):tenGSFP-ER(114):tenGSFP-LRM(115):tenGSFP-LX4(116):gigabitEthernetSX(117):gigabitEthernetLX(118):gigabitEthernetT(119):gigabitEthernetStk(120):gigabitEthernetLH(121):tenGbE-CX4(122):gigabitEthernetESP(123):tenGbE-SR(124):tenGbE-ER(125):tenGbE-LR(126):gigabitEthernetT-sfp(127):fastEtherGEN(128):gigabitEthernetGEN(129):tenGbE-GEN(130):fastEtherBX-D(131):fastEtherBX-U(132):gigabitEthernetBX-D(133):gigabitEthernetBX-U(134):tenGbE-LRM(135):sFP-PLUS-SR(136):sFP-PLUS-LR(137):sFP-PLUS-LRM(138):sFP-PLUS-DAC(139):sFP-PLUS-DA1(140):sFP-PLUS-DA2(141):sFP-PLUS-DA3(142):sFP-PLUS-DA5(143):sFP-PLUS-DA7(144):sFP-PLUS-DA10(145):sFP-PLUS-DA15(146):sFP-PLUS-DA20(147):tenGbE-T(148):tenGbE-TSH(149):tenGbE-TLH(150):tenGbE-STK(151):xFP-SFP-PLUS-DAC(152):xFP-SFP-PLUS-DA1(153):xFP-SFP-PLUS-DA3(154):xFP-SFP-PLUS-DA5(155):xFP-SFP-PLUS-DA7(156):xFP-SFP-PLUS-DA10(157):tenGbE-K(158):sFP-PLUS-ER(160):sFP-CWDM1470(161):sFP-CWDM1490(162):sFP-CWDM1510(163):sFP-CWDM1530(164):sFP-CWDM1550(165):sFP-CWDM1570(166):sFP-CWDM1590(167):sFP-CWDM1610(168):tenGigabitEthernetESP(169):fourGbE-GEN(170):fortyGbE-GEN(171):qSFP-PLUS-SR4(172):qSFP-PLUS-eSR4(173):qSFP-PLUS-LR4(174):qSFP-PLUS-DA1(175):qSFP-PLUS-DA3(176):qSFP-PLUS-DA5(177):qSFP-PLUS-SPLIT-sFP-PLUS-DA1(178):qSFP-PLUS-SPLIT-sFP-PLUS-DA3(179):qSFP-PLUS-SPLIT-sFP-PLUS-DA5(180):sFP-PLUS-AO1(181):sFP-PLUS-AO2(182):sFP-PLUS-AO3(183):sFP-PLUS-AO5(184):sFP-PLUS-AO7(185):sFP-PLUS-AO10(186):sFP-PLUS-AO15(187):qSFP-PLUS-AO1(188):qSFP-PLUS-AO2(189):qSFP-PLUS-AO3(190):qSFP-PLUS-AO5(191):qSFP-PLUS-AO7(192):qSFP-PLUS-AO10(193):qSFP-PLUS-AO15(194):qSFP-PLUS-AO20(195):qSFP-PLUS-SPLIT-sFP-PLUS-AO1(196):qSFP-PLUS-SPLIT-sFP-PLUS-AO2(197):qSFP-PLUS-SPLIT-sFP-PLUS-AO3(198):qSFP-PLUS-SPLIT-sFP-PLUS-AO5(199):qSFP-PLUS-SPLIT-sFP-PLUS-AO7(200):qSFP-PLUS-SPLIT-sFP-PLUS-AO10(201):qSFP-PLUS-SPLIT-sFP-PLUS-AO15(202),The type of port.
.1.3.6.1.4.1.11.2.14.11.5.1.9.10.2.1.3,STATISTICS-MIB::hpIgmpStatsPortAccess,INTEGER,read-only,,deprecated,host(1):router(2):host-router(3),If this value is host then this port has seen IGMP report packets for this active group address. If this value is router then this port has detected IGMP query packets from the querier (device sending out query packets). If this value is host-router then this port has seen report packets, and IGMP query packets from the querier.
.1.3.6.1.4.1.11.2.14.11.5.1.9.10.3,STATISTICS-MIB::hpIgmpStatsPortTable2,,not-accessible,,mandatory,,A table that contains information about status of the IGMP port configurations on this switch. This table2 is supersedes hpIgmpStatsPortTable for switches which support multiple vlans per port.
.1.3.6.1.4.1.11.2.14.11.5.1.9.10.3.1,STATISTICS-MIB::hpIgmpStatsPortEntry2,,not-accessible,hpIgmpStatsVlanIndex:hpIgmpStatsActiveGroupAddr:hpIgmpStatsPortIndex2,mandatory,,The information associated with status of each IGMP port configuration.
.1.3.6.1.4.1.11.2.14.11.5.1.9.10.3.1.1,STATISTICS-MIB::hpIgmpStatsPortIndex2,INTEGER,read-only,,mandatory,,The ifIndex value which uniquely identifies a row in the Interfaces Table.
.1.3.6.1.4.1.11.2.14.11.5.1.9.10.3.1.2,STATISTICS-MIB::hpIgmpStatsPortType2,INTEGER,read-only,,mandatory,other(1):none(2):unknown(3):ethernetCsmacd(6):iso88023Csmacd(7):fddi(15):atm(37):propMultiplexor(54):ieee80212(55):fastEther(62):fastEtherFX(69):fastEtherFX-sfp(70):tenGSFP-SR(112):tenGSFP-LR(113):tenGSFP-ER(114):tenGSFP-LRM(115):tenGSFP-LX4(116):gigabitEthernetSX(117):gigabitEthernetLX(118):gigabitEthernetT(119):gigabitEthernetStk(120):gigabitEthernetLH(121):tenGbE-CX4(122):gigabitEthernetESP(123):tenGbE-SR(124):tenGbE-ER(125):tenGbE-LR(126):gigabitEthernetT-sfp(127):fastEtherGEN(128):gigabitEthernetGEN(129):tenGbE-GEN(130):fastEtherBX-D(131):fastEtherBX-U(132):gigabitEthernetBX-D(133):gigabitEthernetBX-U(134):tenGbE-LRM(135):sFP-PLUS-SR(136):sFP-PLUS-LR(137):sFP-PLUS-LRM(138):sFP-PLUS-DAC(139):sFP-PLUS-DA1(140):sFP-PLUS-DA2(141):sFP-PLUS-DA3(142):sFP-PLUS-DA5(143):sFP-PLUS-DA7(144):sFP-PLUS-DA10(145):sFP-PLUS-DA15(146):sFP-PLUS-DA20(147):tenGbE-T(148):tenGbE-TSH(149):tenGbE-TLH(150):tenGbE-STK(151):xFP-SFP-PLUS-DAC(152):xFP-SFP-PLUS-DA1(153):xFP-SFP-PLUS-DA3(154):xFP-SFP-PLUS-DA5(155):xFP-SFP-PLUS-DA7(156):xFP-SFP-PLUS-DA10(157):tenGbE-K(158):sFP-PLUS-ER(160):sFP-CWDM1470(161):sFP-CWDM1490(162):sFP-CWDM1510(163):sFP-CWDM1530(164):sFP-CWDM1550(165):sFP-CWDM1570(166):sFP-CWDM1590(167):sFP-CWDM1610(168):tenGigabitEthernetESP(169):fourGbE-GEN(170):fortyGbE-GEN(171):qSFP-PLUS-SR4(172):qSFP-PLUS-eSR4(173):qSFP-PLUS-LR4(174):qSFP-PLUS-DA1(175):qSFP-PLUS-DA3(176):qSFP-PLUS-DA5(177):qSFP-PLUS-SPLIT-sFP-PLUS-DA1(178):qSFP-PLUS-SPLIT-sFP-PLUS-DA3(179):qSFP-PLUS-SPLIT-sFP-PLUS-DA5(180):sFP-PLUS-AO1(181):sFP-PLUS-AO2(182):sFP-PLUS-AO3(183):sFP-PLUS-AO5(184):sFP-PLUS-AO7(185):sFP-PLUS-AO10(186):sFP-PLUS-AO15(187):qSFP-PLUS-AO1(188):qSFP-PLUS-AO2(189):qSFP-PLUS-AO3(190):qSFP-PLUS-AO5(191):qSFP-PLUS-AO7(192):qSFP-PLUS-AO10(193):qSFP-PLUS-AO15(194):qSFP-PLUS-AO20(195):qSFP-PLUS-SPLIT-sFP-PLUS-AO1(196):qSFP-PLUS-SPLIT-sFP-PLUS-AO2(197):qSFP-PLUS-SPLIT-sFP-PLUS-AO3(198):qSFP-PLUS-SPLIT-sFP-PLUS-AO5(199):qSFP-PLUS-SPLIT-sFP-PLUS-AO7(200):qSFP-PLUS-SPLIT-sFP-PLUS-AO10(201):qSFP-PLUS-SPLIT-sFP-PLUS-AO15(202),The type of port.
.1.3.6.1.4.1.11.2.14.11.5.1.9.10.3.1.3,STATISTICS-MIB::hpIgmpStatsPortAccess2,INTEGER,read-only,,mandatory,host(1):router(2):host-router(3),If this value is host then this port has seen IGMP report packets for this active group address. If this value is router then this port has detected IGMP query packets from the querier (device sending out query packets). If this value is host-router then this port has seen report packets, and IGMP query packets from the querier.
.1.3.6.1.4.1.11.2.14.11.5.1.9.10.3.1.4,STATISTICS-MIB::hpIgmpStatsPortAgeTimer2,INTEGER,read-only,,mandatory,,The timer is set when the switch hears a report and is waiting for the group queries. If the timer expires the group is considered non-active on the specific port. The value returned shows how many seconds left before the timer expires or 0 if the timer has expired.
.1.3.6.1.4.1.11.2.14.11.5.1.9.10.3.1.5,STATISTICS-MIB::hpIgmpStatsPortLeaveTimer2,INTEGER,read-only,,mandatory,,The timer is set when the switch is waiting for a report response for queries. If the timer expires the group is considered non-active on the specific port. The value returned shows how many seconds left before the timer expires or 0 if the timer has expired.
.1.3.6.1.4.1.11.2.14.11.5.1.9.11,STATISTICS-MIB::hpLdbalStats,,,,,,
.1.3.6.1.4.1.11.2.14.11.5.1.9.11.1,STATISTICS-MIB::hpLdbalStatsPortTable,,not-accessible,,mandatory,,A table that contains information about the operational status of the load balancing ports on this switch.
.1.3.6.1.4.1.11.2.14.11.5.1.9.11.1.1,STATISTICS-MIB::hpLdbalStatsPortEntry,,not-accessible,hpLdbalStatsPortIndex,mandatory,,The information associated with ports configured for load balancing.
.1.3.6.1.4.1.11.2.14.11.5.1.9.11.1.1.1,STATISTICS-MIB::hpLdbalStatsPortIndex,INTEGER,read-only,,mandatory,,The ifIndex value which uniquely identifies a row in the Interfaces Table.
.1.3.6.1.4.1.11.2.14.11.5.1.9.11.1.1.2,STATISTICS-MIB::hpLdbalStatsPortState,INTEGER,read-only,,mandatory,disabled(1):error(2):initial(3):notEstablished(4):established(5):topologyError(6),This variable describes the load balancing port state.  A disabled state indicates the port does not have a link beat. An initial state indicates the port has recently established a link beat and is detecting whether or not it is in the load balancing domain. An established state indicates that the port is inside the load balancing domain, directly connected to another load balancing port, and learning addresses via the reception of MAC address learn information packets. A notEstablished state indicates that the port is outside the load balancing domain, not directly connected to a load balancing port, and learning MAC address by receiving unknown source  address packets. An error state indicates the port has detected a direct connection to more than one load balancing port and is blocked, only accepting load balancing protocol packets. When the error condition clears, the port transitions either into the established or not established state.
.1.3.6.1.4.1.11.2.14.11.5.1.9.11.1.1.3,STATISTICS-MIB::hpLdbalStatsAdjacentSwitch,OCTET,read-only,,mandatory,,The switch identifier of the adjacent switch connected to the corresponding load balancing established port. If load balancing has not been established on this port then this value is void.
.1.3.6.1.4.1.11.2.14.11.5.1.9.11.1.1.4,STATISTICS-MIB::hpLdbalStatsPeerPort,OCTET,read-only,,mandatory,,The port identifier of the peer port connected to  the corresponding load balancing established port. If load balancing has not been established on this port then this value is void.
.1.3.6.1.4.1.11.2.14.11.5.1.9.11.1.1.5,STATISTICS-MIB::hpLdbalStatsAdjacentHost,OCTET,read-only,,mandatory,,The name of the adjacent Host
.1.3.6.1.4.1.11.2.14.11.5.1.9.11.1.1.6,STATISTICS-MIB::hpLdbalStatsMeshWarningStatus,INTEGER,read-only,,mandatory,enabled(1):disabled(2),This variable provides a high level summary of any mismatch in the mesh configuration and remind users to check the log for any mesh warning messages. If it is Yes then there is at least one warning message and will be No if there are no warning messages
.1.3.6.1.4.1.11.2.14.11.5.1.9.12,STATISTICS-MIB::hpSwitchMacStats,,,,,,
.1.3.6.1.4.1.11.2.14.11.5.1.9.12.1,STATISTICS-MIB::hpSwitchFdbAddressCount,INTEGER,read-only,,mandatory,,Keep a counter for the total number of MAC Addresses currently learnt on the box.
.1.3.6.1.4.1.11.2.14.11.5.1.9.13,STATISTICS-MIB::hpSwitchFlowControlStatus,,,,,,
.1.3.6.1.4.1.11.2.14.11.5.1.9.13.1,STATISTICS-MIB::hpSwitchFlowControlStatusTable,,not-accessible,,mandatory,,A table that contains information about the operational status of flow control on this switch.
.1.3.6.1.4.1.11.2.14.11.5.1.9.13.1.1,STATISTICS-MIB::hpSwitchFlowControlStatusEntry,,not-accessible,hpSwitchFlowControlStatusPortIndex,mandatory,,The flow control status per port basis.
.1.3.6.1.4.1.11.2.14.11.5.1.9.13.1.1.1,STATISTICS-MIB::hpSwitchFlowControlStatusPortIndex,INTEGER,read-only,,mandatory,,The ifIndex value which uniquely identifies a row in the Interfaces Table.
.1.3.6.1.4.1.11.2.14.11.5.1.9.13.1.1.2,STATISTICS-MIB::hpSwitchFlowControlState,INTEGER,read-only,,mandatory,off(1):on(2):on-rx(3):on-tx(4),Gets the current Flow Control State from hardware.
.1.3.6.1.4.1.11.2.14.11.5.1.9.14,STATISTICS-MIB::hpFECStatsTrunk,,,,,,
.1.3.6.1.4.1.11.2.14.11.5.1.9.14.1,STATISTICS-MIB::hpFECStatsTrunkTable,,not-accessible,,mandatory,,A table that contains information about the operational status of flow control on this switch.
.1.3.6.1.4.1.11.2.14.11.5.1.9.14.1.1,STATISTICS-MIB::hpFECStatsTrunkEntry,,not-accessible,hpFECStatsTrunkIndex,mandatory,,The flow control status per port basis.
.1.3.6.1.4.1.11.2.14.11.5.1.9.14.1.1.1,STATISTICS-MIB::hpFECStatsTrunkIndex,INTEGER,read-only,,mandatory,,The trunk Index value which uniquely identifies a row in the Trunk Table.
.1.3.6.1.4.1.11.2.14.11.5.1.9.14.1.1.2,STATISTICS-MIB::hpFECStatsTrunkName,OCTET,read-only,,mandatory,,The name of the trunk group
.1.3.6.1.4.1.11.2.14.11.5.1.9.14.1.1.3,STATISTICS-MIB::hpFECStatsTrunkNegotiationStatus,INTEGER,read-only,,mandatory,successful(1):failed(2):initialized(3),Whether the trunk has been successfully negotiated
.1.3.6.1.4.1.11.2.14.11.5.1.9.14.1.1.4,STATISTICS-MIB::hpFECStatsTrunkForwardingMode,INTEGER,read-only,,mandatory,sa-only(1):sa-da(2):none(3),Whether the trunk has been successfully negotiated
.1.3.6.1.4.1.11.2.14.11.5.1.9.14.1.1.5,STATISTICS-MIB::hpFECStatsTrunkFlushPktsEchoed,Counter32,read-only,,mandatory,,The number of FEC flush packets echoed
.1.3.6.1.4.1.11.2.14.11.5.1.9.15,STATISTICS-MIB::hpFECStatsPort,,,,,,
.1.3.6.1.4.1.11.2.14.11.5.1.9.15.1,STATISTICS-MIB::hpFECStatsPortTable,,not-accessible,,mandatory,,A table that contains information about the operational status of flow control on this switch.
.1.3.6.1.4.1.11.2.14.11.5.1.9.15.1.1,STATISTICS-MIB::hpFECStatsPortEntry,,not-accessible,hpFECStatsPortIndex,mandatory,,The flow control status per port basis.
.1.3.6.1.4.1.11.2.14.11.5.1.9.15.1.1.1,STATISTICS-MIB::hpFECStatsPortIndex,INTEGER,read-only,,mandatory,,The ifIndex value which uniquely identifies a row in the Interfaces Table.
.1.3.6.1.4.1.11.2.14.11.5.1.9.15.1.1.2,STATISTICS-MIB::hpFECStatsPortTrunkNumber,INTEGER,read-only,,mandatory,,The internal trunk ID
.1.3.6.1.4.1.11.2.14.11.5.1.9.15.1.1.3,STATISTICS-MIB::hpFECStatsPortTrunkName,OCTET,read-only,,mandatory,,The name of the trunk group
.1.3.6.1.4.1.11.2.14.11.5.1.9.15.1.1.4,STATISTICS-MIB::hpFECStatsPortMode,INTEGER,read-only,,mandatory,down(1):forwarding(2):blocking(3):up(4),FEC port mode
.1.3.6.1.4.1.11.2.14.11.5.1.9.15.1.1.5,STATISTICS-MIB::hpFECStatsPortNegotiationStatus,INTEGER,read-only,,mandatory,successful(1):failed(2):initialized(3),FEC port negotiation state
.1.3.6.1.4.1.11.2.14.11.5.1.9.15.1.1.6,STATISTICS-MIB::hpFECStatsPortHellosSent,Counter32,read-only,,mandatory,,The number of FEC hello packets sent
.1.3.6.1.4.1.11.2.14.11.5.1.9.15.1.1.7,STATISTICS-MIB::hpFECStatsPortHellosReceived,Counter32,read-only,,mandatory,,The number of FEC hello packets received
.1.3.6.1.4.1.11.2.14.11.5.1.9.15.1.1.8,STATISTICS-MIB::hpFECStatsPortMySlowHello,INTEGER,read-only,,mandatory,fast(1):slow(2),Currently running fast or slow FEC hello state
.1.3.6.1.4.1.11.2.14.11.5.1.9.15.1.1.9,STATISTICS-MIB::hpFECStatsPortMyAutoMode,INTEGER,read-only,,mandatory,desirable(1):auto(2),Silent partner mode
.1.3.6.1.4.1.11.2.14.11.5.1.9.15.1.1.10,STATISTICS-MIB::hpFECStatsPortPartner,OCTET,read-only,,mandatory,,The address of the adjacent device(switch, router, server, etc.)
.1.3.6.1.4.1.11.2.14.11.5.1.9.15.1.1.11,STATISTICS-MIB::hpFECStatsPortFlushPktsEchoed,Counter32,read-only,,mandatory,,The number of FEC flush packets echoed
.1.3.6.1.4.1.11.2.14.11.5.1.9.16,STATISTICS-MIB::hpGvrpStats,,,,,,
.1.3.6.1.4.1.11.2.14.11.5.1.9.16.1,STATISTICS-MIB::hpGvrpStatsTable,,not-accessible,,mandatory,,A table that contains statistic information about GVRP on any given VLAN on the switch.
.1.3.6.1.4.1.11.2.14.11.5.1.9.16.1.1,STATISTICS-MIB::hpGvrpStatsEntry,,not-accessible,hpGvrpStatsVlanIndex:hpGvrpStatsPortIndex,mandatory,,The information associated with each row in the GVRP Statistics Table.
.1.3.6.1.4.1.11.2.14.11.5.1.9.16.1.1.1,STATISTICS-MIB::hpGvrpStatsVlanIndex,INTEGER,read-only,,mandatory,,The value which uniquely identifies configuration of a virtual LAN for which entry contains information.
.1.3.6.1.4.1.11.2.14.11.5.1.9.16.1.1.2,STATISTICS-MIB::hpGvrpStatsPortIndex,INTEGER,read-only,,mandatory,,The ifIndex value which uniquely identifies a row in the Interfaces Table.
.1.3.6.1.4.1.11.2.14.11.5.1.9.16.1.1.3,STATISTICS-MIB::hpGvrpStatsPortVlanMember,INTEGER,read-only,,mandatory,pending(1):yes(2):no(3),This value reflects the state of the port with respect to its membership in a VLAN
.1.3.6.1.4.1.11.2.14.11.5.1.9.16.1.1.4,STATISTICS-MIB::hpGvrpPortIfOperStatus,INTEGER,read-only,,mandatory,up(1):down(2),The current operational state of the interface.
.1.3.6.1.4.1.11.2.14.11.5.1.9.16.1.1.5,STATISTICS-MIB::hpPortGvrpCtrlStatus,INTEGER,read-only,,mandatory,learn(1):block(2):disable(3),The status of Gvrp Control on this port.
.1.3.6.1.4.1.11.2.14.11.5.1.9.17,STATISTICS-MIB::hpSshStats,,,,,,
.1.3.6.1.4.1.11.2.14.11.5.1.9.17.1,STATISTICS-MIB::hpSshStatsTable,,not-accessible,,mandatory,,A table that contains statistic information about SSH connections on the switch.
.1.3.6.1.4.1.11.2.14.11.5.1.9.17.1.1,STATISTICS-MIB::hpSshStatsEntry,,not-accessible,hpSshStatsSesIndex,mandatory,,The information associated with each row in the SSH Statistics Table.
.1.3.6.1.4.1.11.2.14.11.5.1.9.17.1.1.1,STATISTICS-MIB::hpSshStatsSesIndex,INTEGER,read-only,,mandatory,,The value which uniquely identifies a row in the SSH Statistics Table.
.1.3.6.1.4.1.11.2.14.11.5.1.9.17.1.1.2,STATISTICS-MIB::hpSshStatsSesType,INTEGER,read-only,,mandatory,console(1):telnet(2):ssh(3):inactive(4),The type of session on the switch.
.1.3.6.1.4.1.11.2.14.11.5.1.9.17.1.1.3,STATISTICS-MIB::hpSshStatsSourceIpPort,OCTET,read-only,,deprecated,,Contains the information about source ip address and  port number of active SSH session (e.g. 192.168.31.114:1722). This object has been deprecated as its not big enough to store IPv6 addresses. It is loosely replaced by hpSshStatsSourceIpAddress and hpSshStatsSourceIpPortNum
.1.3.6.1.4.1.11.2.14.11.5.1.9.17.1.1.4,STATISTICS-MIB::hpSshStatsSesVersion,INTEGER,read-only,,mandatory,version1(1):version2(2):noConnect(255),Specifies the SSH protocol version in use for a given session.
.1.3.6.1.4.1.11.2.14.11.5.1.9.17.1.1.5,STATISTICS-MIB::hpSshStatsSourceIpType,INTEGER,read-only,,mandatory,unknown(0):ipv4(1):ipv6(2):ipv4z(3):ipv6z(4):dns(16),Specifies the Address type of source ip  address of active SSH session.
.1.3.6.1.4.1.11.2.14.11.5.1.9.17.1.1.6,STATISTICS-MIB::hpSshStatsSourceIpAddress,OCTET,read-only,,mandatory,,Specifies the source ip address of active SSH session.
.1.3.6.1.4.1.11.2.14.11.5.1.9.17.1.1.7,STATISTICS-MIB::hpSshStatsSourceIpPortNum,Unsigned32,read-only,,mandatory,,Specifies the source port number of  active SSH session.
.1.3.6.1.4.1.11.2.14.11.5.1.9.18,STATISTICS-MIB::hpSwitchPhysicalPort,,,,,,
.1.3.6.1.4.1.11.2.14.11.5.1.9.18.1,STATISTICS-MIB::hpSwitchPhysicalPortTable,,not-accessible,,mandatory,,A table that contains information about the physical ports of this device.
.1.3.6.1.4.1.11.2.14.11.5.1.9.18.1.1,STATISTICS-MIB::hpSwitchPhysicalPortEntry,,not-accessible,hpSwitchPhysicalPortIndex,mandatory,,Information about the physical ports of this device.
.1.3.6.1.4.1.11.2.14.11.5.1.9.18.1.1.1,STATISTICS-MIB::hpSwitchPhysicalPortIndex,INTEGER,read-only,,mandatory,,An index that uniquely identifies a row in the physical port table.
.1.3.6.1.4.1.11.2.14.11.5.1.9.18.1.1.2,STATISTICS-MIB::hpSwitchPhysicalPortType,INTEGER,read-only,,mandatory,other(1):none(2):unknown(3):ethernetCsmacd(6):iso88023Csmacd(7):fddi(15):atm(37):propMultiplexor(54):ieee80212(55):fastEther(62):fastEtherFX(69):fastEtherFX-sfp(70):tenGSFP-SR(112):tenGSFP-LR(113):tenGSFP-ER(114):tenGSFP-LRM(115):tenGSFP-LX4(116):gigabitEthernetSX(117):gigabitEthernetLX(118):gigabitEthernetT(119):gigabitEthernetStk(120):gigabitEthernetLH(121):tenGbE-CX4(122):gigabitEthernetESP(123):tenGbE-SR(124):tenGbE-ER(125):tenGbE-LR(126):gigabitEthernetT-sfp(127):fastEtherGEN(128):gigabitEthernetGEN(129):tenGbE-GEN(130):fastEtherBX-D(131):fastEtherBX-U(132):gigabitEthernetBX-D(133):gigabitEthernetBX-U(134):tenGbE-LRM(135):sFP-PLUS-SR(136):sFP-PLUS-LR(137):sFP-PLUS-LRM(138):sFP-PLUS-DAC(139):sFP-PLUS-DA1(140):sFP-PLUS-DA2(141):sFP-PLUS-DA3(142):sFP-PLUS-DA5(143):sFP-PLUS-DA7(144):sFP-PLUS-DA10(145):sFP-PLUS-DA15(146):sFP-PLUS-DA20(147):tenGbE-T(148):tenGbE-TSH(149):tenGbE-TLH(150):tenGbE-STK(151):xFP-SFP-PLUS-DAC(152):xFP-SFP-PLUS-DA1(153):xFP-SFP-PLUS-DA3(154):xFP-SFP-PLUS-DA5(155):xFP-SFP-PLUS-DA7(156):xFP-SFP-PLUS-DA10(157):tenGbE-K(158):sFP-PLUS-ER(160):sFP-CWDM1470(161):sFP-CWDM1490(162):sFP-CWDM1510(163):sFP-CWDM1530(164):sFP-CWDM1550(165):sFP-CWDM1570(166):sFP-CWDM1590(167):sFP-CWDM1610(168):tenGigabitEthernetESP(169):fourGbE-GEN(170):fortyGbE-GEN(171):qSFP-PLUS-SR4(172):qSFP-PLUS-eSR4(173):qSFP-PLUS-LR4(174):qSFP-PLUS-DA1(175):qSFP-PLUS-DA3(176):qSFP-PLUS-DA5(177):qSFP-PLUS-SPLIT-sFP-PLUS-DA1(178):qSFP-PLUS-SPLIT-sFP-PLUS-DA3(179):qSFP-PLUS-SPLIT-sFP-PLUS-DA5(180):sFP-PLUS-AO1(181):sFP-PLUS-AO2(182):sFP-PLUS-AO3(183):sFP-PLUS-AO5(184):sFP-PLUS-AO7(185):sFP-PLUS-AO10(186):sFP-PLUS-AO15(187):qSFP-PLUS-AO1(188):qSFP-PLUS-AO2(189):qSFP-PLUS-AO3(190):qSFP-PLUS-AO5(191):qSFP-PLUS-AO7(192):qSFP-PLUS-AO10(193):qSFP-PLUS-AO15(194):qSFP-PLUS-AO20(195):qSFP-PLUS-SPLIT-sFP-PLUS-AO1(196):qSFP-PLUS-SPLIT-sFP-PLUS-AO2(197):qSFP-PLUS-SPLIT-sFP-PLUS-AO3(198):qSFP-PLUS-SPLIT-sFP-PLUS-AO5(199):qSFP-PLUS-SPLIT-sFP-PLUS-AO7(200):qSFP-PLUS-SPLIT-sFP-PLUS-AO10(201):qSFP-PLUS-SPLIT-sFP-PLUS-AO15(202),The type for this port.
.1.3.6.1.4.1.11.2.14.11.5.1.9.19,STATISTICS-MIB::hpSwitchCosStats,,,,,,
.1.3.6.1.4.1.11.2.14.11.5.1.9.19.1,STATISTICS-MIB::hpSwitchQueueWatchStatsTable,,not-accessible,,mandatory,,A table that contains statistic information about Egress Queue drops on the switch.
.1.3.6.1.4.1.11.2.14.11.5.1.9.19.1.1,STATISTICS-MIB::hpSwitchQueueWatchStatsEntry,,not-accessible,hpSwitchQueueWatchStatsPortIndex:hpSwitchQueueWatchStatsQueueIndex,mandatory,,The information associated with each row in the Queue Watch Statistics Table.
.1.3.6.1.4.1.11.2.14.11.5.1.9.19.1.1.1,STATISTICS-MIB::hpSwitchQueueWatchStatsPortIndex,INTEGER,read-only,,mandatory,,The ifIndex value which uniquely identifies a row in the Interfaces Table.
.1.3.6.1.4.1.11.2.14.11.5.1.9.19.1.1.2,STATISTICS-MIB::hpSwitchQueueWatchStatsQueueIndex,INTEGER,read-only,,mandatory,,The specific value which uniquely identifies a specific port queue.
.1.3.6.1.4.1.11.2.14.11.5.1.9.19.1.1.3,STATISTICS-MIB::hpSwitchQueueWatchStatsQueueDrops,Counter32,read-only,,mandatory,,The number of packets dropped for a particular egress port queue.
.1.3.6.1.4.1.11.2.14.11.5.1.10,HP-ICF-OID::hpSwitchVirtualStackMib,,,,,,
.1.3.6.1.4.1.11.2.14.11.5.1.10.1,HP-SwitchStack-MIB::hpSwitchStackConfig,,,,,,
.1.3.6.1.4.1.11.2.14.11.5.1.10.1.1,HP-SwitchStack-MIB::hpSwitchStackAdminStatus,INTEGER,read-write,,current,candidate(1):disabled(2):member(3):command(4):pending(5),The operational status of the stacking feature.
.1.3.6.1.4.1.11.2.14.11.5.1.10.1.2,HP-SwitchStack-MIB::hpSwitchStackCommandAddr,OCTET,read-write,,current,,This variable is only valid if 'hpSwitchStackAdminStatus' has been set 'member'. This is the MAC address of the command switch for this member.
.1.3.6.1.4.1.11.2.14.11.5.1.10.1.3,HP-SwitchStack-MIB::hpSwitchStackName,OCTET,read-write,,current,,This variable is only valid if 'hpSwitchStackAdminStatus' has been set 'command-switch'. This is the name of the stack for which this switch is serving as the command switch (maximum length of 20 characters).
.1.3.6.1.4.1.11.2.14.11.5.1.10.1.4,HP-SwitchStack-MIB::hpSwitchStackPropagate,INTEGER,read-write,,current,enable(1):disable(2),Enable/disable SNMP community propagation. This variable is only valid if 'hpSwitchStackAdminStatus' has been set to 'command-switch'.
.1.3.6.1.4.1.11.2.14.11.5.1.10.1.5,HP-SwitchStack-MIB::hpSwitchStackAutoJoin,INTEGER,read-write,,current,enable(1):disable(2),Enable/disable auto join on stack. This variable  is only valid for candidate switch.
.1.3.6.1.4.1.11.2.14.11.5.1.10.1.6,HP-SwitchStack-MIB::hpSwitchStackAutoGrab,INTEGER,read-write,,current,enable(1):disable(2),Enable/disable auto grab on stack. This variable  is only valid if 'hpSwitchStackAdminStatus' has been set to 'command-switch'.
.1.3.6.1.4.1.11.2.14.11.5.1.10.2,HP-SwitchStack-MIB::hpSwitchStackConfigMemberTable,,not-accessible,,current,,A table that contains a group of member switches configured to be in this switch's stack.
.1.3.6.1.4.1.11.2.14.11.5.1.10.2.1,HP-SwitchStack-MIB::hpSwitchStackConfigMemberEntry,,not-accessible,hpSwitchStackMemberSwitchNum,current,,A group of member switches configured to be in this switch's stack.
.1.3.6.1.4.1.11.2.14.11.5.1.10.2.1.1,HP-SwitchStack-MIB::hpSwitchStackMemberSwitchNum,Integer32,read-only,,current,,An index that uniquely identifies the member switch associated with this row entry.
.1.3.6.1.4.1.11.2.14.11.5.1.10.2.1.2,HP-SwitchStack-MIB::hpSwitchStackMemberMacAddr,OCTET,read-create,,current,,The MAC Address that identifies the member switch.
.1.3.6.1.4.1.11.2.14.11.5.1.10.2.1.3,HP-SwitchStack-MIB::hpSwitchStackMemberPassword,OCTET,read-create,,deprecated,,The manager password configured on the member switch. This object represents the first 17 octets of the object hpSwitchStackMemberPasswordLong; reading or writing a value to this object will also read or write  hpSwitchStackMemberPasswordLong, truncating the length to 17 octets. This object always returns a 0 length octet string when read.
.1.3.6.1.4.1.11.2.14.11.5.1.10.2.1.4,HP-SwitchStack-MIB::hpSwitchStackMemberEntryStatus,INTEGER,read-create,,current,active(1):notInService(2):notReady(3):createAndGo(4):createAndWait(5):destroy(6),The status of a stack member entry.
.1.3.6.1.4.1.11.2.14.11.5.1.10.2.1.5,HP-SwitchStack-MIB::hpSwitchStackMemberPasswordLong,OCTET,read-create,,current,,The manager password configured on the member switch. This object always returns a 0 length octet string when read. The exact size of this object is implementation dependent; consult the product documentation to determine the supported size for a specific product.
.1.3.6.1.4.1.11.2.14.11.5.1.10.3,HP-SwitchStack-MIB::hpStackStats,,,,,,
.1.3.6.1.4.1.11.2.14.11.5.1.10.3.1,HP-SwitchStack-MIB::hpStackStatsName,OCTET,read-only,,current,,The stack name of this switch.
.1.3.6.1.4.1.11.2.14.11.5.1.10.3.2,HP-SwitchStack-MIB::hpStackStatsMembersNum,Integer32,read-only,,current,,Number of member switches that have joined this switch's stack. This variable is only valid if this switch has been set as a 'command-switch'.
.1.3.6.1.4.1.11.2.14.11.5.1.10.3.3,HP-SwitchStack-MIB::hpStackStatsMembersUnreachable,Integer32,read-only,,current,,The number of unreachable member switches. This variable is only valid if this switch has been set as a 'command-switch'.
.1.3.6.1.4.1.11.2.14.11.5.1.10.3.4,HP-SwitchStack-MIB::hpStackStatsMemberID,Integer32,read-only,,current,,The number by which member switch is known on the stack.
.1.3.6.1.4.1.11.2.14.11.5.1.10.3.5,HP-SwitchStack-MIB::hpStackStatsMgmtIpAddr,IpAddress,read-only,,current,,The IP address of the Stack manager switch (command switch). This variable is only valid if this switch has been set as a 'member-switch'.
.1.3.6.1.4.1.11.2.14.11.5.1.10.3.6,HP-SwitchStack-MIB::hpStackStatsStackingStatus,INTEGER,read-only,,current,joined(1):pending(2):noReponse(3):notCommand(4):stackFull(5):remoteFailure(6):unknownFailure(7):evicted(8):commandUp(9):commandDown(10):unusedStatus(11):undiscovered(12),The status of this switch. This variable is only valid if this switch has been set as a 'member-switch'.
.1.3.6.1.4.1.11.2.14.11.5.1.10.4,HP-SwitchStack-MIB::hpStackStatsMembersTable,,not-accessible,,current,,A table containing the member switches that have joined this switch's stack.
.1.3.6.1.4.1.11.2.14.11.5.1.10.4.1,HP-SwitchStack-MIB::hpStackStatsMemberEntry,,not-accessible,hpStackStatsMemberSwitchIndx,current,,The information associated with each row in the member table.
.1.3.6.1.4.1.11.2.14.11.5.1.10.4.1.1,HP-SwitchStack-MIB::hpStackStatsMemberSwitchIndx,Integer32,read-only,,current,,The index identifying the member switch.
.1.3.6.1.4.1.11.2.14.11.5.1.10.4.1.2,HP-SwitchStack-MIB::hpStackStatsMemberMacAddr,OCTET,read-only,,current,,The MAC address of the member switch.
.1.3.6.1.4.1.11.2.14.11.5.1.10.4.1.3,HP-SwitchStack-MIB::hpStackStatsMemberSystemName,OCTET,read-only,,current,,The system name of the member switch.
.1.3.6.1.4.1.11.2.14.11.5.1.10.4.1.4,HP-SwitchStack-MIB::hpStackStatsMemberDeviceType,OCTET,read-only,,current,,The device type of the member switch.
.1.3.6.1.4.1.11.2.14.11.5.1.10.4.1.5,HP-SwitchStack-MIB::hpStackStatsMemberOperStatus,INTEGER,read-only,,current,pending(1):joined(2):noReponse(3):stackingDisabled(4):invalidPassword(5):commanderAnotherStack(6):remoteFailure(7):unknownFailure(8):rejected(9):memberUp(10):memberDown(11):commanderThisStack(12):unusedStatus(13):undiscovered(14),The current state of the member switch.
.1.3.6.1.4.1.11.2.14.11.5.1.10.5,HP-SwitchStack-MIB::hpSwitchDiscoveryConfig,,,,,,
.1.3.6.1.4.1.11.2.14.11.5.1.10.5.1,HP-SwitchStack-MIB::hpSwitchDiscoveryAdminStatus,INTEGER,read-write,,current,enable(1):disable(2),The operational status of the discovery protocol.
.1.3.6.1.4.1.11.2.14.11.5.1.10.5.2,HP-SwitchStack-MIB::hpSwitchDiscoveryTransmissionInterval,Integer32,read-write,,current,,The interval between the sending out of new discovery packets.
.1.3.6.1.4.1.11.2.14.11.5.1.10.6,HP-SwitchStack-MIB::hpDiscoverStatsCandidatesTable,,not-accessible,,current,,A table containing the switches that have been discovered as a candidate to form a stack.
.1.3.6.1.4.1.11.2.14.11.5.1.10.6.1,HP-SwitchStack-MIB::hpDiscoverStatsCandidateEntry,,not-accessible,hpDiscoverStatsCandidateMacAddr,current,,The information associated with each row in the candidate table.
.1.3.6.1.4.1.11.2.14.11.5.1.10.6.1.1,HP-SwitchStack-MIB::hpDiscoverStatsCandidateMacAddr,OCTET,read-only,,current,,The MAC address of the candidate switch. Used as an index identifying row in the table.
.1.3.6.1.4.1.11.2.14.11.5.1.10.6.1.2,HP-SwitchStack-MIB::hpDiscoverStatsCandidateSystemName,OCTET,read-only,,current,,The system name of the candidate switch.
.1.3.6.1.4.1.11.2.14.11.5.1.10.6.1.3,HP-SwitchStack-MIB::hpDiscoverStatsCandidateDeviceType,OCTET,read-only,,current,,The device type of the candidate switch.
.1.3.6.1.4.1.11.2.14.11.5.1.10.7,HP-SwitchStack-MIB::hpDiscoverStatsTable,,not-accessible,,current,,A table containing the switches that have been discovered on the network.
.1.3.6.1.4.1.11.2.14.11.5.1.10.7.1,HP-SwitchStack-MIB::hpDiscoverStatsEntry,,not-accessible,hpDiscoverStatsSwitchIndex,current,,The information associated with each row in the discover table.
.1.3.6.1.4.1.11.2.14.11.5.1.10.7.1.1,HP-SwitchStack-MIB::hpDiscoverStatsSwitchIndex,Integer32,read-only,,current,,The index identifying the row in the table.
.1.3.6.1.4.1.11.2.14.11.5.1.10.7.1.2,HP-SwitchStack-MIB::hpDiscoverStatsSwitchStackName,OCTET,read-only,,current,,The stack name of the discovered switch.
.1.3.6.1.4.1.11.2.14.11.5.1.10.7.1.3,HP-SwitchStack-MIB::hpDiscoverStatsSwitchMacAddr,OCTET,read-only,,current,,The MAC address of the discovered switch.
.1.3.6.1.4.1.11.2.14.11.5.1.10.7.1.4,HP-SwitchStack-MIB::hpDiscoverStatsSwitchSystemName,OCTET,read-only,,current,,The system name of the discovered switch.
.1.3.6.1.4.1.11.2.14.11.5.1.10.7.1.5,HP-SwitchStack-MIB::hpDiscoverStatsSwitchStatus,OCTET,read-only,,current,,The status of the discovered switch.
.1.3.6.1.4.1.11.2.14.11.5.1.10.8,HP-SwitchStack-MIB::hpSwitchVirtualStackMibConformance,,,,,,
.1.3.6.1.4.1.11.2.14.11.5.1.10.8.1,HP-SwitchStack-MIB::hpSwitchVirtualStackMibCompliances,,,,,,
.1.3.6.1.4.1.11.2.14.11.5.1.10.8.1.1,HP-SwitchStack-MIB::hpSwitchVirtualStackMibCompliance,,,,,,The compliance statement for devices implementing the HP Stack Mib.
.1.3.6.1.4.1.11.2.14.11.5.1.10.8.1.2,HP-SwitchStack-MIB::hpSwitchVirtualStackMibCompliance1,,,,,,The compliance statement for devices implementing the HP Stack Mib.
.1.3.6.1.4.1.11.2.14.11.5.1.10.8.2,HP-SwitchStack-MIB::hpSwitchVirtualStackMibGroups,,,,,,
.1.3.6.1.4.1.11.2.14.11.5.1.10.8.2.1,HP-SwitchStack-MIB::hpSwitchStackConfigGroup,,,,,,A collection of objects for configuring a stack.
.1.3.6.1.4.1.11.2.14.11.5.1.10.8.2.2,HP-SwitchStack-MIB::hpSwitchStackStatsGroup,,,,,,A collection of objects for determining state  and status of a stack.
.1.3.6.1.4.1.11.2.14.11.5.1.10.8.2.3,HP-SwitchStack-MIB::hpSwitchDiscoverConfigGroup,,,,,,A collection of objects for configuring the  state of the stack discovery protocol.
.1.3.6.1.4.1.11.2.14.11.5.1.10.8.2.4,HP-SwitchStack-MIB::hpDiscoverStatsGroup,,,,,,A collection of objects for viewing the discovered devices by the stack discovery  protocol.
.1.3.6.1.4.1.11.2.14.11.5.1.10.8.2.5,HP-SwitchStack-MIB::hpSwitchStackConfigGroup1,,,,,,A collection of objects for configuring a stack.
.1.3.6.1.4.1.11.2.14.11.5.1.11,HP-ICF-OID::hpicfDhcpRelay,,,,,,
.1.3.6.1.4.1.11.2.14.11.5.1.12,HP-ICF-OID::hpicfBridge,,,,,,
.1.3.6.1.4.1.11.2.14.11.5.1.12.1,HP-ICF-BRIDGE::hpicfBridgeObjects,,,,,,
.1.3.6.1.4.1.11.2.14.11.5.1.12.1.1,HP-ICF-BRIDGE::hpicfBridgeBase,,,,,,
.1.3.6.1.4.1.11.2.14.11.5.1.12.1.1.1,HP-ICF-BRIDGE::hpicfBridgeMaxVlans,Integer32,read-write,,current,,Defines the number of VLANs that the switch will support for dynamic use without requiring a reboot.
.1.3.6.1.4.1.11.2.14.11.5.1.12.1.1.2,HP-ICF-BRIDGE::hpicfBridgeVlanEnable,INTEGER,read-write,,current,enable(1):disable(2),Administrative status of VLAN support on this switch.
.1.3.6.1.4.1.11.2.14.11.5.1.12.1.1.3,HP-ICF-BRIDGE::hpicfBridgePrimaryVlan,Unsigned32,read-write,,current,,The 802.1Q VLAN ID of the primary VLAN for this switch.
.1.3.6.1.4.1.11.2.14.11.5.1.12.1.1.4,HP-ICF-BRIDGE::hpicfBridgeVlanConfigStatus,INTEGER,read-only,,current,active(1):notInService(2):notReady(3),If one or more variables in this group has been reconfigured since the last reboot in such a way as to require a reboot to take effect, the value of this variable will be set to 'notInService'.
.1.3.6.1.4.1.11.2.14.11.5.1.12.1.2,HP-ICF-BRIDGE::hpicfBridgeGvrp,,,,,,
.1.3.6.1.4.1.11.2.14.11.5.1.12.1.2.1,HP-ICF-BRIDGE::hpicfBridgeGvrpPortTable,,not-accessible,,current,,A table that contains information about the GVRP port configurations on this switch.
.1.3.6.1.4.1.11.2.14.11.5.1.12.1.2.1.1,HP-ICF-BRIDGE::hpicfBridgeGvrpPortEntry,,not-accessible,,current,,GVRP information associated with a single port.
.1.3.6.1.4.1.11.2.14.11.5.1.12.1.2.1.1.1,HP-ICF-BRIDGE::hpicfBridgeGvrpRestrictedVlanReg,INTEGER,read-write,,current,true(1):false(2),Controls GVRP's ability to learn new VLANs on this port. When set to 'false', GVRP will accept JOIN requests for new VLANs on this port. When set to 'true', GVRP will only process protocol packets that concern themselves with known VLANs.
.1.3.6.1.4.1.11.2.14.11.5.1.12.1.4,HP-ICF-BRIDGE::hpicfBridgeRstp,,,,,,
.1.3.6.1.4.1.11.2.14.11.5.1.12.1.4.1,HP-ICF-BRIDGE::hpicfBridgeRstpForceVersion,INTEGER,read-write,,current,stpCompatibility(0):rstpOperation(2):mstpOperation(3),Operational mode of Spanning Tree protocol: - stpCompatibility means protocol operates as STP protocol on all ports. - rstpOperation means protocol operates as Rapid  Reconfiguration on all ports except on those ports where legacy system has been detected. - mstpOperation means protocol operates in native MSTP mode, this option is available only if object 'hpicfBridgeRstpProtocolVersion' is set to 'ieee8021s'.
.1.3.6.1.4.1.11.2.14.11.5.1.12.1.4.2,HP-ICF-BRIDGE::hpicfBridgeRstpConfigStatus,INTEGER,read-only,,current,active(1):notInService(2):notReady(3),The configuration status of this group of objects. If one or more variables in this group were reconfigured since last reboot and required reboot to take effect, the value of this variable will be set to notInService.
.1.3.6.1.4.1.11.2.14.11.5.1.12.1.4.3,HP-ICF-BRIDGE::hpicfBridgeRstpProtocolVersion,INTEGER,read-write,,current,ieee8021d(0):ieee8021w(2):ieee8021s(3),The protocol version currently running on switch - ieee8021d version of STP protocol, - ieee8021w Rapid Reconfiguration version of STP protocol, - ieee8021s Multiple STP (MSTP) protocol
.1.3.6.1.4.1.11.2.14.11.5.1.12.1.4.4,HP-ICF-BRIDGE::hpicfBridgeRstpAdminStatus,INTEGER,read-write,,current,enable(1):disable(2),The operational status of the spanning tree protocol
.1.3.6.1.4.1.11.2.14.11.5.1.12.1.4.5,HP-ICF-BRIDGE::hpicfBridgeRstpPortTable,,not-accessible,,current,,A table that contains port-specific information for the Spanning Tree Protocol.
.1.3.6.1.4.1.11.2.14.11.5.1.12.1.4.5.1,HP-ICF-BRIDGE::hpicfBridgeRstpPortEntry,,not-accessible,hpicfBridgeRstpPortIndex,current,,A list of information maintained by every port about the Spanning Tree Protocol state for that port.
.1.3.6.1.4.1.11.2.14.11.5.1.12.1.4.5.1.1,HP-ICF-BRIDGE::hpicfBridgeRstpPortIndex,Integer32,read-only,,current,,The port number of the port for which this entry contains Spanning Tree Protocol management information.
.1.3.6.1.4.1.11.2.14.11.5.1.12.1.4.5.1.2,HP-ICF-BRIDGE::hpicfBridgeRstpAdminEdgePort,INTEGER,read-write,,current,enable(1):disable(2),Indicate that port is connected to LAN segment that don't  have any bridge connected to it
.1.3.6.1.4.1.11.2.14.11.5.1.12.1.4.5.1.3,HP-ICF-BRIDGE::hpicfBridgeRstpOperEdgePort,INTEGER,read-only,,current,enable(1):disable(2),Reflects the value of the operEdgePort parameter, as  defined by the operation of the Bridge Detection state machine (Clause 18 of P802.1t). The value of this parameter is used by a Designated Port in order to determine how  rapidly it may transition to the Forwarding Port State  (see 17.23, Port Role Transitions state machine).  The Bridge Detection state machine sets this parameter to  the value of adminEdgePort (P802.1t 18.1.3) on  initialization, and forces its value to FALSE if any BPDUs are received on the Port.
.1.3.6.1.4.1.11.2.14.11.5.1.12.1.4.5.1.4,HP-ICF-BRIDGE::hpicfBridgeRstpAdminPointToPointMac,INTEGER,read-write,,current,forceTrue(1):forceFalse(2):auto(3), forceTrue: This value indicates that the administrator requires the MAC to be treated as if it is connected to a point-to-point LAN  segment, regardless of any indications to the contrary that  are generated by the MAC entity. forceFalse: This value indicates that the administrator requires the MAC to be treated as if it is connected to a non-point-to-point LAN segment, regardless of any indications to the contrary  that are generated by the MAC entity. auto: This value indicates that the administrator requires the  point-to-point status of the MAC to be determined in accordance with the specific MAC procedures defined in 6.5.
.1.3.6.1.4.1.11.2.14.11.5.1.12.1.4.5.1.5,HP-ICF-BRIDGE::hpicfBridgeRstpOperPointToPointMac,INTEGER,read-only,,current,true(1):false(2), true: This value indicates that the MAC is connected to a  point-to-point LAN segment; i.e., there is at most one other  system attached to the LAN segment. false: This value indicates that the MAC is connected to a  non-point-to-point LAN segment; i.e., there can be more than one other system attached to the LAN segment.
.1.3.6.1.4.1.11.2.14.11.5.1.12.1.4.5.1.6,HP-ICF-BRIDGE::hpicfBridgeRstpPortPathCost,Integer32,read-write,,current,,Rapid Reconfiguration Port Path Cost - 32 bit values
.1.3.6.1.4.1.11.2.14.11.5.1.12.1.4.5.1.7,HP-ICF-BRIDGE::hpicfBridgeRstpForceBpduMigrationCheck,INTEGER,read-write,,current,true(1):false(2),When operating in RST (version 2 or greater) mode writing TRUE(1) to this object forces this port to  transmit RST BPDUs. Any other operation on this object has no effect and it always returns FALSE(2) when read.
.1.3.6.1.4.1.11.2.14.11.5.1.12.1.4.5.1.8,HP-ICF-BRIDGE::hpicfBridgeRstpAutoEdgePort,INTEGER,read-write,,current,true(1):false(2),Represents the value of 'autoEdgePort' parameter.  This parameter is optional. It is used by the Bridge  Detection state machine for the automatic identification  of edge ports. The default is false.
.1.3.6.1.4.1.11.2.14.11.5.1.12.1.4.5.1.9,HP-ICF-BRIDGE::hpicfBridgeRstpPortBpduFiltering,INTEGER,read-write,,current,true(1):false(2),This value indicates whether or not BPDUs need to be filtered on this port. If the value is true the received BPDUs will be dropped and no BPDUs will be transmitted on the port. If the value is false the BPDUs are being processed as usual. The default is false.
.1.3.6.1.4.1.11.2.14.11.5.1.12.1.5,HP-ICF-BRIDGE::hpicfBridgeLoopProtect,,,,,,
.1.3.6.1.4.1.11.2.14.11.5.1.12.1.5.0,HP-ICF-BRIDGE::hpicfBridgeLoopProtectNotifications,,,,,,
.1.3.6.1.4.1.11.2.14.11.5.1.12.1.5.0.1,HP-ICF-BRIDGE::hpicfBridgeLoopProtectLoopDetectedNotification,,,,,,A hpicfBridgeLoopProtectLoopDetectedNotification signifies that a loop has been detected by the loop protection protocol. Generation of this notification is controlled by  hpicfBridgeLoopProtectTrapLoopDetectEnable. To prevent  excessive notifications this trap is rate-limited to allow  a maximum of 1 notifications every 30 seconds. Notifications that are not sent due to rate-limiting are dropped, and not queued up to be sent later.
.1.3.6.1.4.1.11.2.14.11.5.1.12.1.5.0.2,HP-ICF-BRIDGE::hpicfBridgeVlanLoopProtectLoopDetectedNotification,,,,,,A hpicfBridgeLoopProtectLoopDetectedNotification signifies that a loop has been detected by the loop protect while  operating on a per VLAN mode. Generation of this notification is controlled by  hpicfBridgeLoopProtectTrapLoopDetectEnable. To prevent  excessive notifications this trap is rate-limited to allow  a maximum of 1 notifications every 30 seconds. Notifications that are not sent due to rate-limiting are dropped, and not queued up to be sent later.
.1.3.6.1.4.1.11.2.14.11.5.1.12.1.5.1,HP-ICF-BRIDGE::hpicfBridgeLoopProtectBase,,,,,,
.1.3.6.1.4.1.11.2.14.11.5.1.12.1.5.1.1,HP-ICF-BRIDGE::hpicfBridgeLoopProtectInterval,Integer32,read-write,,current,,The interval in seconds at which loop protection packets are transmitted. The default value is 5 seconds.
.1.3.6.1.4.1.11.2.14.11.5.1.12.1.5.1.2,HP-ICF-BRIDGE::hpicfBridgeLoopProtectTrapLoopDetectEnable,INTEGER,read-write,,current,true(1):false(2),Indicates whether notifications should be sent when a loop is detected on a port. By default this object will have a value of false(2).
.1.3.6.1.4.1.11.2.14.11.5.1.12.1.5.1.3,HP-ICF-BRIDGE::hpicfBridgeLoopProtectEnableTimer,Integer32,read-write,,current,,The time in seconds to wait before re-enabling a port disabled by loop protection. When a port is disabled by  loop protection a re-enable timer for the port is initialized with the value of this period. If the period is not equal to  zero the port will be re-enabled after the period has elapsed. Otherwise the port will remain disabled.
.1.3.6.1.4.1.11.2.14.11.5.1.12.1.5.1.4,HP-ICF-BRIDGE::hpicfBridgeLoopProtectMode,INTEGER,read-write,,current,port(1):vlan(2),This value indicate whether loop protect operates in 
.1.3.6.1.4.1.11.2.14.11.5.1.12.1.5.1.5,HP-ICF-BRIDGE::hpicfBridgeLoopProtectVIDList,OCTET,read-write,,current,,A list of VLANs on which loop protection is enabled.
.1.3.6.1.4.1.11.2.14.11.5.1.12.1.5.2,HP-ICF-BRIDGE::hpicfBridgeLoopProtectPort,,,,,,
.1.3.6.1.4.1.11.2.14.11.5.1.12.1.5.2.1,HP-ICF-BRIDGE::hpicfBridgeLoopProtectPortTable,,not-accessible,,current,,Per-interface configuration for Loop Protection.
.1.3.6.1.4.1.11.2.14.11.5.1.12.1.5.2.1.1,HP-ICF-BRIDGE::hpicfBridgeLoopProtectPortEntry,,not-accessible,ifIndex,current,,Loop Protection configuration information for a single port.
.1.3.6.1.4.1.11.2.14.11.5.1.12.1.5.2.1.1.1,HP-ICF-BRIDGE::hpicfBridgeLoopProtectPortEnable,INTEGER,read-write,,current,true(1):false(2),This object indicates whether this port has Loop protection enabled. The default value is FALSE
.1.3.6.1.4.1.11.2.14.11.5.1.12.1.5.2.1.1.2,HP-ICF-BRIDGE::hpicfBridgeLoopProtectPortLoopDetected,INTEGER,read-only,,current,true(1):false(2),This object will be set to TRUE when a loop is detected on  the port. The value of this object will be reset to FALSE when  the port's hpicfBridgeLoopProtectPortEnable is set to  FALSE.
.1.3.6.1.4.1.11.2.14.11.5.1.12.1.5.2.1.1.3,HP-ICF-BRIDGE::hpicfBridgeLoopProtectPortLastLoopTime,TimeTicks,read-only,,current,,The value of sysUpTime when a loop was last detected on this port. A value of 0 means that the timestamp has not been set.
.1.3.6.1.4.1.11.2.14.11.5.1.12.1.5.2.1.1.4,HP-ICF-BRIDGE::hpicfBridgeLoopProtectPortLoopCount,Counter32,read-only,,current,,When the loop protect feature is enabled on the port this  object counts the number of loops detected on the port.  When the feature is disabled on the port the value of this object is set to 0.
.1.3.6.1.4.1.11.2.14.11.5.1.12.1.5.2.1.1.5,HP-ICF-BRIDGE::hpicfBridgeLoopProtectPortReceiverAction,INTEGER,read-write,,current,disableTx(1):noDisable(2),Controls the action taken when a Loop protection packet is received on this port. When set to 'disableTx' the port  that transmitted the packet will be disabled. When set to  'noDisable' the transmitting port will not be disabled.
.1.3.6.1.4.1.11.2.14.11.5.1.12.1.5.2.1.1.6,HP-ICF-BRIDGE::hpicfBridgeLoopDetectedVlan,Integer32,read-only,,current,,Refers to this object for the port on which loop is 
.1.3.6.1.4.1.11.2.14.11.5.1.12.1.6,HP-ICF-BRIDGE::hpicfBridgeMirrorSession,,,,,,
.1.3.6.1.4.1.11.2.14.11.5.1.12.1.6.1,HP-ICF-BRIDGE::hpicfBridgeMirrorSessionBase,,,,,,
.1.3.6.1.4.1.11.2.14.11.5.1.12.1.6.2,HP-ICF-BRIDGE::hpicfBridgeMirrorSessionDestination,,,,,,
.1.3.6.1.4.1.11.2.14.11.5.1.12.1.6.2.1,HP-ICF-BRIDGE::hpicfBridgeMirrorSessionTable,,not-accessible,,current,,This table contains mirror session information  related to a given specified destination. A mirror  session is a group of one or more portCopyEntries  all having the same specified destination. A given specified destination may be associated with more then one mirror session.
.1.3.6.1.4.1.11.2.14.11.5.1.12.1.6.2.1.1,HP-ICF-BRIDGE::hpicfBridgeMirrorSessionEntry,,not-accessible,,current,,An entry in the hpicfBridgeMirrorSessionEntry contains mirror session specific identification information.
.1.3.6.1.4.1.11.2.14.11.5.1.12.1.6.2.1.1.1,HP-ICF-BRIDGE::hpicfBridgeMirrorSessionID,Integer32,read-create,,current,,This variable is valid only for mirroring transfers. It allows mirroring destinations to be grouped. A given hpicfBridgeMirrorSessionID can only be used with 1 destination. However, multiple sources may be related to the same hpicfBridgeMirrorSessionID. To ensure that the hpicfBridgeMirrorSessionID is properly assigned, it can only be updated when the respective portCopyEntry object is in the notReady state. For non-mirroring transfers, the value should be set to 0. 
.1.3.6.1.4.1.11.2.14.11.5.1.12.1.6.2.1.1.2,HP-ICF-BRIDGE::hpicfBridgeDontTagWithVlan,INTEGER,read-write,,current,enabled(1):disabled(2),This oid mentions whether VLAN tag is to part of the  denotes that the VLAN tag should not be part of the  This object is persistent and when written the entity 
.1.3.6.1.4.1.11.2.14.11.5.1.12.1.6.2.1.1.3,HP-ICF-BRIDGE::hpicfBridgeMirrorSessionType,INTEGER,read-write,,current,noMirror(1):mirrorAddresses(2):mirrorPolicies(3):mirrorPorts(4):mirrorVlan(5),This oid mentions what is the source type of traffic associated with mirror session. noMirror Not associated with any mirroring. mirrorAddresses Mirror traffic based on addresses mirrorPolicies Mirror traffic based on policies. mirrorPorts Mirror traffic based on ports. mirrorVlan Mirror traffic based on vlan. 
.1.3.6.1.4.1.11.2.14.11.5.1.12.1.7,HP-ICF-BRIDGE::hpicfBridgeVoiceVlanConfig,,,,,,
.1.3.6.1.4.1.11.2.14.11.5.1.12.1.7.1,HP-ICF-BRIDGE::hpicfBridgeVoiceVlanConfigTable,,not-accessible,,current,,HP specific extension to dot1qVlanStaticTable to  for configuring voice on a vlan.
.1.3.6.1.4.1.11.2.14.11.5.1.12.1.7.1.1,HP-ICF-BRIDGE::hpicfBridgeVoiceVlanConfigEntry,,not-accessible,,current,,An entry for HP Specific extension table.
.1.3.6.1.4.1.11.2.14.11.5.1.12.1.7.1.1.1,HP-ICF-BRIDGE::hpicfBridgeVoiceVlanEnable,INTEGER,read-write,,current,true(1):false(2),Labels the VLAN as a Voice VLAN which allows to separate, prioritize, and authenticate voice traffic moving through the network.
.1.3.6.1.4.1.11.2.14.11.5.1.12.1.8,HP-ICF-BRIDGE::hpicfBridgeJumboInterfaceConfig,,,,,,
.1.3.6.1.4.1.11.2.14.11.5.1.12.1.8.1,HP-ICF-BRIDGE::hpicfBridgeJumboInterfaceConfigTable,,not-accessible,,current,,This table contains objects for configuring voice on a interface.
.1.3.6.1.4.1.11.2.14.11.5.1.12.1.8.1.1,HP-ICF-BRIDGE::hpicfBridgeJumboInterfaceConfigEntry,,not-accessible,ifIndex,current,,An entry in the hpicfBridgeJumboInterfaceConfigEntry contains jumbo configuration for a interface.
.1.3.6.1.4.1.11.2.14.11.5.1.12.1.8.1.1.1,HP-ICF-BRIDGE::hpicfBridgeJumboInterfaceEnable,INTEGER,read-write,,current,true(1):false(2),Labels the interface as a Jumbo Interface which allows to pass packets up to 9220 bytes in size. Currently this configuration is supported only on vlan.
.1.3.6.1.4.1.11.2.14.11.5.1.12.1.9,HP-ICF-BRIDGE::hpicfBridgeManagementInterfaceConfig,,,,,,
.1.3.6.1.4.1.11.2.14.11.5.1.12.1.9.1,HP-ICF-BRIDGE::hpicfBridgeManagementInterfaceConfigTable,,not-accessible,,current,,This table contains objects for configuring interface as Management interface.
.1.3.6.1.4.1.11.2.14.11.5.1.12.1.9.1.1,HP-ICF-BRIDGE::hpicfBridgeManagementInterfaceConfigEntry,,not-accessible,ifIndex,current,,An entry in the hpicfBridgeManagementInterfaceConfigEntry contains objects for configuring interface as management interface.
.1.3.6.1.4.1.11.2.14.11.5.1.12.1.9.1.1.1,HP-ICF-BRIDGE::hpicfBridgeManagementInterfaceEnable,INTEGER,read-write,,current,true(1):false(2),Labels the interface as management interface. Currently, only one vlan can be management interface on the switch.
.1.3.6.1.4.1.11.2.14.11.5.1.12.2,HP-ICF-BRIDGE::hpicfBridgeConformance,,,,,,
.1.3.6.1.4.1.11.2.14.11.5.1.12.2.1,HP-ICF-BRIDGE::hpicfBridgeGroups,,,,,,
.1.3.6.1.4.1.11.2.14.11.5.1.12.2.1.1,HP-ICF-BRIDGE::hpicfBridgeVlanBaseGroup,,,,,,Basic VLAN configuration information that is not in the standard 802.1Q Bridge MIB.
.1.3.6.1.4.1.11.2.14.11.5.1.12.2.1.2,HP-ICF-BRIDGE::hpicfBridgeGvrpPortGroup,,,,,,GVRP configuration information that is not (yet) in the standard 802.1Q Bridge MIB. Note that this information is very likely to be added to a future update of the 802.1Q Bridge MIB, at which time, support for objects in this group will most likely be deprecated.
.1.3.6.1.4.1.11.2.14.11.5.1.12.2.1.3,HP-ICF-BRIDGE::hpicfBridgeRstpBaseGroup,,,,,,Rapid Spanning Tree Protocol (RSTP) configuration information that is in neither the standard 802.1w MIB, nor the standard 802.1d (STP) MIB. Note that as RSTP improves compatibility, some  objects in this MIB will likely be deprecated.
.1.3.6.1.4.1.11.2.14.11.5.1.12.2.1.4,HP-ICF-BRIDGE::hpicfBridgeLoopProtectBaseGroup,,,,,,A collection of objects providing basic instrumentation and control of the HP Loop protection entity.
.1.3.6.1.4.1.11.2.14.11.5.1.12.2.1.5,HP-ICF-BRIDGE::hpicfBridgeMirrorSessionBaseGroup,,,,,,A collection of objects providing identification of a mirroring session entity.
.1.3.6.1.4.1.11.2.14.11.5.1.12.2.1.7,HP-ICF-BRIDGE::hpicfBridgeVoiceVlanConfigGroup,,,,,,A collection of objects for voice configuration  on vlan.
.1.3.6.1.4.1.11.2.14.11.5.1.12.2.1.8,HP-ICF-BRIDGE::hpicfBridgeJumboInterfaceConfigGroup,,,,,,A collection of objects providing Jumbo configuration  on a interface.
.1.3.6.1.4.1.11.2.14.11.5.1.12.2.1.9,HP-ICF-BRIDGE::hpicfBridgeManagementInterfaceConfigGroup,,,,,,A collection of objects for management interface  configuration.
.1.3.6.1.4.1.11.2.14.11.5.1.12.2.1.10,HP-ICF-BRIDGE::hpicfBridgeLoopProtectVLANGroup,,,,,,A collection of objects providing support for Loop Protect
.1.3.6.1.4.1.11.2.14.11.5.1.12.2.1.11,HP-ICF-BRIDGE::hpicfBridgeRstpPortEntryGroup,,,,,,A collection of objects providing support for Rstp.
.1.3.6.1.4.1.11.2.14.11.5.1.12.2.1.12,HP-ICF-BRIDGE::hpicfBridgeMirrorSessionEntryGroup,,,,,,A collection of objects providing mirror session  information related to a given specific destination.
.1.3.6.1.4.1.11.2.14.11.5.1.12.2.1.13,HP-ICF-BRIDGE::hpicfBridgeRstpPortEntryGroup1,,,,,,A collection of objects providing support for Rstp.
.1.3.6.1.4.1.11.2.14.11.5.1.12.2.2,HP-ICF-BRIDGE::hpicfBridgeCompliances,,,,,,
.1.3.6.1.4.1.11.2.14.11.5.1.12.2.2.1,HP-ICF-BRIDGE::hpicfBridgeCompliance,,,,,,The compliance statement for HP Switches with IEEE 802.1Q VLAN support for bridging objects not found in the standard Bridge MIBs.
.1.3.6.1.4.1.11.2.14.11.5.1.12.2.2.2,HP-ICF-BRIDGE::hpicfBridgeComplianceRevTwo,,,,,,The compliance statement for HP Switches with IEEE 802.1W Rapid Spanning Tree Protocol support for  bridging objects not found in the standard Bridge  MIBs.
.1.3.6.1.4.1.11.2.14.11.5.1.12.2.2.3,HP-ICF-BRIDGE::hpicfBridgeComplianceRevThree,,,,,,The compliance statement for HP Switches with IEEE 802.1W Rapid Spanning Tree Protocol support for  bridging objects not found in the standard Bridge  MIBs.
.1.3.6.1.4.1.11.2.14.11.5.1.12.2.2.4,HP-ICF-BRIDGE::hpicfBridgeComplianceRevFour,,,,,,The compliance statement for HP Switches with IEEE 802.1W Rapid Spanning Tree Protocol support for  bridging objects not found in the standard Bridge  MIBs.
.1.3.6.1.4.1.11.2.14.11.5.1.12.2.2.5,HP-ICF-BRIDGE::hpicfBridgeLoopProtectCompliance,,,,,,The compliance statement for HP Switches with  support for hpicfBridge loop protection objects.
.1.3.6.1.4.1.11.2.14.11.5.1.12.2.2.6,HP-ICF-BRIDGE::hpicfBridgeVlanBaseConfigCompliance,,,,,,The compliance statement for HP Switches that  support basic vlan configuration.
.1.3.6.1.4.1.11.2.14.11.5.1.12.2.2.7,HP-ICF-BRIDGE::hpicfBridgeInterfaceConfigCompliance,,,,,,The compliance statement for HP Switches that  support basic interface configuration.
.1.3.6.1.4.1.11.2.14.11.5.1.12.2.2.8,HP-ICF-BRIDGE::hpicfBridgeVlanLoopProtConfigCompliance,,,,,,The compliance statement for HP Switches that  support loop protect per VLAN feature.
.1.3.6.1.4.1.11.2.14.11.5.1.12.2.2.9,HP-ICF-BRIDGE::hpicfBridgeRstpPortEntryCompliance,,,,,,The compliance statement for HP Switches that  support Rstp.
.1.3.6.1.4.1.11.2.14.11.5.1.12.2.2.10,HP-ICF-BRIDGE::hpicfBridgeMirrorSessionEntryCompliance,,,,,,The compliance statement for HP Switches that  support mirror sessions.
.1.3.6.1.4.1.11.2.14.11.5.1.12.2.2.11,HP-ICF-BRIDGE::hpicfBridgeRstpPortEntryCompliance1,,,,,,The compliance statement for HP Switches that  support Rstp.
.1.3.6.1.4.1.11.2.14.11.5.1.12.2.3,HP-ICF-BRIDGE::hpicfBridgeNotGroups,,,,,,
.1.3.6.1.4.1.11.2.14.11.5.1.12.2.3.1,HP-ICF-BRIDGE::hpicfBridgeLoopProtectNotGrp,,,,,,Notifications for Loop protection.
.1.3.6.1.4.1.11.2.14.11.5.1.12.2.3.2,HP-ICF-BRIDGE::hpicfBridgeVlanLoopProtectNotGrp,,,,,,Notifications for Loop protect per VLAN
.1.3.6.1.4.1.11.2.14.11.5.1.13,HP-ICF-OID::hpicfRip,,,,,,
.1.3.6.1.4.1.11.2.14.11.5.1.13.1,HP-ICF-RIP::hpicfRipObjects,,,,,,
.1.3.6.1.4.1.11.2.14.11.5.1.13.1.1,HP-ICF-RIP::hpicfRipGeneral,,,,,,
.1.3.6.1.4.1.11.2.14.11.5.1.13.1.1.1,HP-ICF-RIP::hpicfRipAdminStatus,INTEGER,read-write,,current,enable(1):disable(2),The operational status of the RIP routing protocol.
.1.3.6.1.4.1.11.2.14.11.5.1.13.1.1.2,HP-ICF-RIP::hpicfRipDefaultMetric,Integer32,read-write,,current,,Default metric value for routes redistributed to RIP.
.1.3.6.1.4.1.11.2.14.11.5.1.13.1.1.3,HP-ICF-RIP::hpicfRipAutoSummary,INTEGER,read-write,,current,true(1):false(2),A flag indicating whether RIP should perform border filtering on subnet routes when crossing a network boundary. Interfaces that are configured for RIPv1 or RIPv1-compatible mode must always filter subnets at network boundaries. Interfaces configured for RIPv2 mode will only filter subnets if this flag is set to 'true'. Setting this to 'true' will result in all subnets within a class-based network to be summarized using a single route for the subnet number, which can decrease the size of the routing tables. However, if any networks are discontiguous, this flag should be set to 'false' for proper routing.
.1.3.6.1.4.1.11.2.14.11.5.1.13.1.1.4,HP-ICF-RIP::hpicfRipDistance,Integer32,read-write,,current,,The administrative distance to associate with routes learned by RIP. Routes with lower distances are preferred. By default, RIP routes have an administrative distance of 120.
.1.3.6.1.4.1.11.2.14.11.5.1.13.1.2,HP-ICF-RIP::hpicfRipIfConfTable,,not-accessible,,current,,HP extensions to the rip2IfConfTable.
.1.3.6.1.4.1.11.2.14.11.5.1.13.1.2.1,HP-ICF-RIP::hpicfRipIfConfEntry,,not-accessible,,current,,HP extensions for a single RIP interface.
.1.3.6.1.4.1.11.2.14.11.5.1.13.1.2.1.1,HP-ICF-RIP::hpicfRipIfConfDoPoison,INTEGER,read-create,,current,true(1):false(2),Flag indicating if router should perform poison reverse on this interface.
.1.3.6.1.4.1.11.2.14.11.5.1.13.1.2.1.2,HP-ICF-RIP::hpicfRipIfConfCost,Integer32,read-create,,current,,RIP metric for this interface.
.1.3.6.1.4.1.11.2.14.11.5.1.13.1.3,HP-ICF-RIP::hpicfRipRedistTable,,not-accessible,,current,,Table for configuring route redistribution into RIP.
.1.3.6.1.4.1.11.2.14.11.5.1.13.1.3.1,HP-ICF-RIP::hpicfRipRedistEntry,,not-accessible,hpicfRipRedistSrcProto,current,,An entry in the table for configuring route redistribution into RIP from a single source protocol. Entries in this table are not created dynamically. There will be a single entry for each supported source protocol.
.1.3.6.1.4.1.11.2.14.11.5.1.13.1.3.1.1,HP-ICF-RIP::hpicfRipRedistSrcProto,INTEGER,not-accessible,,current,other(1):local(2):netmgmt(3):icmp(4):egp(5):ggp(6):hello(7):rip(8):isIs(9):esIs(10):ciscoIgrp(11):bbnSpfIgp(12):ospf(13):bgp(14):idpr(15):ciscoEigrp(16):dvmrp(17):rpl(18):dhcp(19):ttdp(20),Source protocol to redistribute routes from.
.1.3.6.1.4.1.11.2.14.11.5.1.13.1.3.1.2,HP-ICF-RIP::hpicfRipRedistEnabled,INTEGER,read-write,,current,true(1):false(2),A flag indicating whether RIP should redistribute routes from this source protocol.
.1.3.6.1.4.1.11.2.14.11.5.1.13.1.4,HP-ICF-RIP::hpicfRipRedistRestrictTable,,not-accessible,,current,,A table of route prefixes for filtering out routes that RIP should not redistribute. Any route that is contained by a range in this table (in other words, has a longer mask than that specified by hpicfRipRedistRestrictMask and where the route destination ANDed with the hpicfRipRedistRestrictMask is equal to hpicfRipRedistRestrictAddr) will not be redistributed as an external route by RIP.
.1.3.6.1.4.1.11.2.14.11.5.1.13.1.4.1,HP-ICF-RIP::hpicfRipRedistRestrictEntry,,not-accessible,hpicfRipRedistRestrictAddr:hpicfRipRedistRestrictMask,current,,A single entry in the table. Any route, regardless of source protocol which is contained within the specified range will not be redistributed into RIP. Entries in this table are created dynamically using the hpicfRipRedistRestrictStatus object.
.1.3.6.1.4.1.11.2.14.11.5.1.13.1.4.1.1,HP-ICF-RIP::hpicfRipRedistRestrictAddr,IpAddress,not-accessible,,current,,The IP address of the range of route entries to exclude from redistribution into RIP.
.1.3.6.1.4.1.11.2.14.11.5.1.13.1.4.1.2,HP-ICF-RIP::hpicfRipRedistRestrictMask,IpAddress,not-accessible,,current,,The mask for the range of route entries to exclude from redistribution into RIP.
.1.3.6.1.4.1.11.2.14.11.5.1.13.1.4.1.3,HP-ICF-RIP::hpicfRipRedistRestrictStatus,INTEGER,read-create,,current,active(1):notInService(2):notReady(3):createAndGo(4):createAndWait(5):destroy(6),The status of this entry.
.1.3.6.1.4.1.11.2.14.11.5.1.13.2,HP-ICF-RIP::hpicfRipConformance,,,,,,
.1.3.6.1.4.1.11.2.14.11.5.1.13.2.1,HP-ICF-RIP::hpicfRipGroups,,,,,,
.1.3.6.1.4.1.11.2.14.11.5.1.13.2.1.1,HP-ICF-RIP::hpicfRipBaseGroup,,,,,,Basic RIP configuration information that is not present in the standard RIP MIB.
.1.3.6.1.4.1.11.2.14.11.5.1.13.2.1.2,HP-ICF-RIP::hpicfRipIfGroup,,,,,,RIP interface configuration information that is not present in the standard RIP MIB.
.1.3.6.1.4.1.11.2.14.11.5.1.13.2.1.3,HP-ICF-RIP::hpicfRipRedistGroup,,,,,,A collection of objects for controlling the redistribution of external routes by RIP.
.1.3.6.1.4.1.11.2.14.11.5.1.13.2.1.4,HP-ICF-RIP::hpicfRipDistanceGroup,,,,,,A collection of objects for configuring the administrative distance of routes learned by RIP.
.1.3.6.1.4.1.11.2.14.11.5.1.13.2.2,HP-ICF-RIP::hpicfRipCompliances,,,,,,
.1.3.6.1.4.1.11.2.14.11.5.1.13.2.2.1,HP-ICF-RIP::hpicfRipCompliance,,,,,,The compliance statement for HP Routing switches that support RIP.
.1.3.6.1.4.1.11.2.14.11.5.1.13.2.2.2,HP-ICF-RIP::hpicfRipDistanceCompliance,,,,,,The compliance statement for HP Routing switches that support RIP.
.1.3.6.1.4.1.11.2.14.11.5.1.14,HP-ICF-OID::hpicfOspf,,,,,,
.1.3.6.1.4.1.11.2.14.11.5.1.14.1,HP-ICF-OSPF::hpicfOspfObjects,,,,,,
.1.3.6.1.4.1.11.2.14.11.5.1.14.1.1,HP-ICF-OSPF::hpicfOspfGeneral,,,,,,
.1.3.6.1.4.1.11.2.14.11.5.1.14.1.1.1,HP-ICF-OSPF::hpicfOspf1583CompatibilityMode,INTEGER,read-write,,current,true(1):false(2),Controls the preference rules used when choosing among multiple AS-external-LSAs advertising the same destination. When set to 'true', the preference rules remain those specified in RFC 1583. When set to 'false', the preference rules are those stated in RFC 2328, which prevent routing loops when AS-external-LSAs for the same destination have been originated from different areas. Set to 'true' by default. In order to minimize the chance of routing loops, all OSPF routers in an OSPF routing domain should have this object set identically. When there are routers present that have not been updated with the functionality specified in RFC 2328, all routers should have this object set to 'true'. Otherwise, all routers should have this object set to 'false', preventing all routing loops.
.1.3.6.1.4.1.11.2.14.11.5.1.14.1.1.2,HP-ICF-OSPF::hpicfOspfDefaultImportMetric,Integer32,read-write,,current,,The default metric used for advertising external routes imported into OSPF by this router.
.1.3.6.1.4.1.11.2.14.11.5.1.14.1.1.3,HP-ICF-OSPF::hpicfOspfDefaultImportMetricType,INTEGER,read-write,,current,externalType1(1):externalType2(2),The default metric type used for advertising external routes imported into OSPF by this router.
.1.3.6.1.4.1.11.2.14.11.5.1.14.1.1.4,HP-ICF-OSPF::hpicfOspfIntraAreaDistance,Integer32,read-write,,current,,The default administrative distance to associate with intra-area routes learned by OSPF. Routes with lower distances are preferred. By default, OSPF routes have an administrative distance of 110. Note that the administrative distance settings for OSPF do not affect the choice of routes within OSPF. OSPF will still prefer intra-area routes over inter-area or AS-external routes even if hpicfOspfInterAreaDistance or hpicfOspfExternalDistance is lower than hpicfOspfIntraAreaDistance. The appropriate  administrative distance value is applied to the route that OSPF selects as its best route to a destination and is used to decide whether OSPF's route is preferred over a route from some other source.
.1.3.6.1.4.1.11.2.14.11.5.1.14.1.1.5,HP-ICF-OSPF::hpicfOspfInterAreaDistance,Integer32,read-write,,current,,The default administrative distance to associate with inter-area routes learned by OSPF. Routes with lower distances are preferred. By default, OSPF routes have an administrative distance of 110. Note that the administrative distance settings for OSPF do not affect the choice of routes within OSPF. OSPF will still prefer intra-area routes over inter-area routes, even if hpicfOspfInterAreaDistance is lower than hpicfOspfIntraAreaDistance. It will also still prefer inter-area routes over AS-external routes even if hpicfOspfExternalDistance is lower than hpicfOspfInterAreaDistance. The appropriate  administrative distance value is applied to the route that OSPF selects as its best route to a destination and is used to decide whether OSPF's route is preferred over a route from some other source.
.1.3.6.1.4.1.11.2.14.11.5.1.14.1.1.6,HP-ICF-OSPF::hpicfOspfExternalDistance,Integer32,read-write,,current,,The default administrative distance to associate with AS-external routes learned by OSPF. Routes with lower distances are preferred. By default, OSPF routes have an administrative distance of 110. Note that the administrative distance settings for OSPF do not affect the choice of routes within OSPF. OSPF will still prefer intra-area routes and inter-area routes over AS-external routes even if hpicfOspfExternalDistance is lower than the hpicfOspfIntraAreaDistance or hpicfOspfInterAreaDistance. The appropriate  administrative distance value is applied to the route that OSPF selects as its best route to a destination and is used to decide whether OSPF's route is preferred over a route from some other source.
.1.3.6.1.4.1.11.2.14.11.5.1.14.1.1.7,HP-ICF-OSPF::hpicfOspfSpfThrottleStartInterval,Integer32,read-write,,current,,Initial SPF schedule delay
.1.3.6.1.4.1.11.2.14.11.5.1.14.1.1.8,HP-ICF-OSPF::hpicfOspfSpfThrottleWaitInterval,Integer32,read-write,,current,,Minimum wait time between two consecutive SPFs.
.1.3.6.1.4.1.11.2.14.11.5.1.14.1.1.9,HP-ICF-OSPF::hpicfOspfSpfThrottleMaxWaitTime,Integer32,read-write,,current,,Maximum wait time between two consecutive SPFs.
.1.3.6.1.4.1.11.2.14.11.5.1.14.1.1.10,HP-ICF-OSPF::hpicfOspfSpfThrottleCurrentSpfInterval,Unsigned32,read-only,,current,,Current dynamic wait interval between SPF computations
.1.3.6.1.4.1.11.2.14.11.5.1.14.1.2,HP-ICF-OSPF::hpicfOspfRedistTable,,not-accessible,,current,,Table for configuring route redistribution into OSPF.
.1.3.6.1.4.1.11.2.14.11.5.1.14.1.2.1,HP-ICF-OSPF::hpicfOspfRedistEntry,,not-accessible,hpicfOspfRedistSrcProto,current,,An entry in the table for configuring route redistribution into OSPF from a single source protocol. Entries in this table are not created dynamically. There will be a single entry for each supported source protocol.
.1.3.6.1.4.1.11.2.14.11.5.1.14.1.2.1.1,HP-ICF-OSPF::hpicfOspfRedistSrcProto,INTEGER,not-accessible,,current,other(1):local(2):netmgmt(3):icmp(4):egp(5):ggp(6):hello(7):rip(8):isIs(9):esIs(10):ciscoIgrp(11):bbnSpfIgp(12):ospf(13):bgp(14):idpr(15):ciscoEigrp(16):dvmrp(17):rpl(18):dhcp(19):ttdp(20),Source protocol to redistribute routes from.
.1.3.6.1.4.1.11.2.14.11.5.1.14.1.2.1.2,HP-ICF-OSPF::hpicfOspfRedistEnabled,INTEGER,read-write,,current,true(1):false(2),A flag indicating whether OSPF should redistribute routes from this source protocol.
.1.3.6.1.4.1.11.2.14.11.5.1.14.1.3,HP-ICF-OSPF::hpicfOspfRedistRestrictTable,,not-accessible,,current,,A table of route prefixes for filtering out routes that OSPF should not redistribute. Any route that is contained by a range in this table (in other words, has a longer mask than that specified by hpicfOspfRedistRestrictMask and where the route destination ANDed with the hpicfOspfRedistRestrictMask is equal to hpicfOspfRedistRestrictAddr) will not be redistributed as an AS-external LSA by OSPF.
.1.3.6.1.4.1.11.2.14.11.5.1.14.1.3.1,HP-ICF-OSPF::hpicfOspfRedistRestrictEntry,,not-accessible,hpicfOspfRedistRestrictAddr:hpicfOspfRedistRestrictMask,current,,A single entry in the table. Any route, regardless of source protocol which is contained within the specified range will not be redistributed into OSPF. Entries in this table are created dynamically using the hpicfOspfRedistRestrictStatus object.
.1.3.6.1.4.1.11.2.14.11.5.1.14.1.3.1.1,HP-ICF-OSPF::hpicfOspfRedistRestrictAddr,IpAddress,not-accessible,,current,,The IP address of the range of route entries to exclude from redistribution into OSPF.
.1.3.6.1.4.1.11.2.14.11.5.1.14.1.3.1.2,HP-ICF-OSPF::hpicfOspfRedistRestrictMask,IpAddress,not-accessible,,current,,The mask for the range of route entries to exclude from redistribution into OSPF.
.1.3.6.1.4.1.11.2.14.11.5.1.14.1.3.1.3,HP-ICF-OSPF::hpicfOspfRedistRestrictStatus,INTEGER,read-create,,current,active(1):notInService(2):notReady(3):createAndGo(4):createAndWait(5):destroy(6),The status of this entry.
.1.3.6.1.4.1.11.2.14.11.5.1.14.1.4,HP-ICF-OSPF::hpicfOspfLogTable,,not-accessible,,current,,A table containing the configuration parameters pertaining for OSPF routing protocol logging facility.
.1.3.6.1.4.1.11.2.14.11.5.1.14.1.4.1,HP-ICF-OSPF::hpicfOspfLogEntry,,not-accessible,hpicfOspfLogType,current,,The configuration parameters pertaining to a OSPF log entry. Each entry contains information about the action and severity for a particular logType, and for each version of OSPF. 
.1.3.6.1.4.1.11.2.14.11.5.1.14.1.4.1.1,HP-ICF-OSPF::hpicfOspfLogType,INTEGER,not-accessible,,current,neighborAdjacencyChanges(1):other(2),The type of log for every kind of event in OSPF routing protocol .
.1.3.6.1.4.1.11.2.14.11.5.1.14.1.4.1.2,HP-ICF-OSPF::hpicfOspfLogAction,INTEGER,read-write,,current,enabled(1):disabled(2):enabledWithDetail(3),The action, if any, that was taken by the agent when the event represented by hpicfOspfLogType. When enabled, brief information of the event is logged and if it is set to enabledWithDetail, provides more information, like every state changes, will get logged. If it is set to disabled, no events are logged.
.1.3.6.1.4.1.11.2.14.11.5.1.14.1.5,HP-ICF-OSPF::hpicfOspfNbrTable,,not-accessible,,current,,HP proprietary extension to ospfNbrTable to support read-only elements for reading neighbor adjacency length, designated router, backup designated router, Area ID and the and time-to-expiry for an OSPF neighbor
.1.3.6.1.4.1.11.2.14.11.5.1.14.1.5.1,HP-ICF-OSPF::hpicfOspfNbrEntry,,not-accessible,,current,,Each entry is extension of ospfNbr Entry and gives more information for OSPF neighbors
.1.3.6.1.4.1.11.2.14.11.5.1.14.1.5.1.1,HP-ICF-OSPF::hpicfOspfNbrUpTime,Integer32,read-only,,current,,This object specifies the time duration for which the  adjacency with the particular neighbor is active. This should be  a monotonically increasing timer for the duration the adjacency  is active. This counter should be reset when an adjacency is lost or  re-established.
.1.3.6.1.4.1.11.2.14.11.5.1.14.1.5.1.2,HP-ICF-OSPF::hpicfOspfNbrTimeToExpiry,Integer32,read-only,,current,,This object specifies the time remaining for the dead timer for the particular neighbor to expire. This counter thus specifies the time in  seconds left for an adjacency to be brought down in case no Hello packet  is received during the interval.
.1.3.6.1.4.1.11.2.14.11.5.1.14.1.5.1.3,HP-ICF-OSPF::hpicfOspfNbrDesignatedRouter,IpAddress,read-only,,current,,The IP address of the designated router.
.1.3.6.1.4.1.11.2.14.11.5.1.14.1.5.1.4,HP-ICF-OSPF::hpicfOspfNbrBackupDesignatedRouter,IpAddress,read-only,,current,,The IP address of the backup designated router.
.1.3.6.1.4.1.11.2.14.11.5.1.14.1.5.1.5,HP-ICF-OSPF::hpicfOspfNbrAreaId,IpAddress,read-only,,current,,A 32-bit integer uniquely identifying an area. Area ID 0.0.0.0 is used for the OSPF backbone.
.1.3.6.1.4.1.11.2.14.11.5.1.14.1.5.1.6,HP-ICF-OSPF::hpicfOspfNbrInterfaceName,OCTET,read-only,,current,,The ifName value of this OSPF interface.
.1.3.6.1.4.1.11.2.14.11.5.1.14.1.6,HP-ICF-OSPF::hpicfOspfAreaAggregateTable,,not-accessible,,current,,HP proprietary extensions to ospfAreaAggregateTable
.1.3.6.1.4.1.11.2.14.11.5.1.14.1.6.1,HP-ICF-OSPF::hpicfOspfAreaAggregateEntry,,not-accessible,,current,,Each entry is extension of ospfAreaAggregateEntry
.1.3.6.1.4.1.11.2.14.11.5.1.14.1.6.1.1,HP-ICF-OSPF::hpicfOspfAreaAggregateCost,Integer32,read-create,,current,,Manually configured cost of the summary advertisement. A value of 0 indicates that the cost defined and  calculated by the OSPF standard should be used.  Valid costs range from 1-16777215
.1.3.6.1.4.1.11.2.14.11.5.1.14.1.6.1.2,HP-ICF-OSPF::hpicfOspfAreaAggregateType,INTEGER,read-create,,current,type1(1):type2(2),Configure whether external metric and OSPF metric are comparable. If 'metric-type' is specified as 'type1', the external metric and the OSPF metric are considered comparable. 'type2' implies non-comparable metric
.1.3.6.1.4.1.11.2.14.11.5.1.14.2,HP-ICF-OSPF::hpicfOspfConformance,,,,,,
.1.3.6.1.4.1.11.2.14.11.5.1.14.2.1,HP-ICF-OSPF::hpicfOspfGroups,,,,,,
.1.3.6.1.4.1.11.2.14.11.5.1.14.2.1.1,HP-ICF-OSPF::hpicfOspfBaseGroup,,,,,,Basic OSPF configuration information that is not in the standard OSPF MIB.
.1.3.6.1.4.1.11.2.14.11.5.1.14.2.1.2,HP-ICF-OSPF::hpicfOspfRedistGroup,,,,,,A collection of objects for controlling the redistribution of external routes by OSPF.
.1.3.6.1.4.1.11.2.14.11.5.1.14.2.1.3,HP-ICF-OSPF::hpicfOspfDistanceGroup,,,,,,A collection of objects for configuring the administrative distance of routes learned by OSPF.
.1.3.6.1.4.1.11.2.14.11.5.1.14.2.1.4,HP-ICF-OSPF::hpicfOspfStatisticGroup,,,,,,A collection of objects that contain  OSPF interface and SPF statistics.
.1.3.6.1.4.1.11.2.14.11.5.1.14.2.1.5,HP-ICF-OSPF::hpicfOspfSpfTimerGroup,,,,,,Time taken since the last spf Run.
.1.3.6.1.4.1.11.2.14.11.5.1.14.2.1.6,HP-ICF-OSPF::hpicfOspfLogGroup,,,,,,A collection of objects for configuring the logging of OSPF events.
.1.3.6.1.4.1.11.2.14.11.5.1.14.2.1.7,HP-ICF-OSPF::hpicfOspfNbrGroup,,,,,,A collection of read-only elements for an OSPF neighbor.
.1.3.6.1.4.1.11.2.14.11.5.1.14.2.1.8,HP-ICF-OSPF::hpicfOspfIfGroup,,,,,,These interface objects used for  managing/monitoring OSPFv2 interfaces.
.1.3.6.1.4.1.11.2.14.11.5.1.14.2.1.9,HP-ICF-OSPF::hpicfOspfAreaLsdbGroup,,,,,,These objects used for  managing/monitoring OSPFv2 LSAs.
.1.3.6.1.4.1.11.2.14.11.5.1.14.2.1.10,HP-ICF-OSPF::hpicfOspfExtLsdbGroup,,,,,,These objects are used for OSPFv2 systems  that display their AS-scope link state database.
.1.3.6.1.4.1.11.2.14.11.5.1.14.2.1.11,HP-ICF-OSPF::hpicfOspfAreaAggregateGroup,,,,,,Group for ospfAreaAggregate objects.
.1.3.6.1.4.1.11.2.14.11.5.1.14.2.1.12,HP-ICF-OSPF::hpicfOspfSpfDelayGroup,,,,,,Group for ospfSpfThrottle objects.
.1.3.6.1.4.1.11.2.14.11.5.1.14.2.1.13,HP-ICF-OSPF::hpicfOspfAreaAggregateGroup1,,,,,,Group for ospfAreaAggregateType objects.
.1.3.6.1.4.1.11.2.14.11.5.1.14.2.2,HP-ICF-OSPF::hpicfOspfCompliances,,,,,,
.1.3.6.1.4.1.11.2.14.11.5.1.14.2.2.1,HP-ICF-OSPF::hpicfOspfCompliance,,,,,,The compliance statement for HP Routing Switches that support OSPF.
.1.3.6.1.4.1.11.2.14.11.5.1.14.2.2.2,HP-ICF-OSPF::hpicfOspfReqCompliance,,,,,,The compliance statement for show Requestlist command.
.1.3.6.1.4.1.11.2.14.11.5.1.14.2.2.3,HP-ICF-OSPF::hpicfOspfFloodCompliance,,,,,,The compliance statement for show Floodlist command.
.1.3.6.1.4.1.11.2.14.11.5.1.14.2.2.4,HP-ICF-OSPF::hpicfOspfRetransCompliance,,,,,,The compliance statement for show Retranslist command.
.1.3.6.1.4.1.11.2.14.11.5.1.14.2.2.5,HP-ICF-OSPF::hpicfOspfCompliance1,,,,,,The compliance statement for this module.
.1.3.6.1.4.1.11.2.14.11.5.1.14.2.2.6,HP-ICF-OSPF::hpicfOspfSpfDelayCompliance,,,,,,The compliance statement for this module.
.1.3.6.1.4.1.11.2.14.11.5.1.14.2.2.7,HP-ICF-OSPF::hpicfOspfAreaAggregateCompliance,,,,,,The compliance statement for this module.
.1.3.6.1.4.1.11.2.14.11.5.1.14.2.3,HP-ICF-OSPF::hpicfOspfReqGroups,,,,,,
.1.3.6.1.4.1.11.2.14.11.5.1.14.2.3.1,HP-ICF-OSPF::hpicfOspfReqManGroup,,,,,,A mandatory group that displays ID information with Respect to Link state,router,interface and the LSA type
.1.3.6.1.4.1.11.2.14.11.5.1.14.2.3.2,HP-ICF-OSPF::hpicfOspfReqGroup,,,,,,This is a normal group that gives checksum,sequence and age related information 
.1.3.6.1.4.1.11.2.14.11.5.1.14.2.4,HP-ICF-OSPF::hpicfOspfRetransGroups,,,,,,
.1.3.6.1.4.1.11.2.14.11.5.1.14.2.4.1,HP-ICF-OSPF::hpicfOspfRetransManGroup,,,,,,A mandatory group that displays ID information with Respect to Link state,router,interface and the LSA type
.1.3.6.1.4.1.11.2.14.11.5.1.14.2.4.2,HP-ICF-OSPF::hpicfOspfRetransGroup,,,,,,This is a normal group that gives checksum,sequence and age related information 
.1.3.6.1.4.1.11.2.14.11.5.1.14.2.5,HP-ICF-OSPF::hpicfOspfFloodGroups,,,,,,
.1.3.6.1.4.1.11.2.14.11.5.1.14.2.5.1,HP-ICF-OSPF::hpicfOspfFloodManGroup,,,,,,A mandatory group that displays ID information with Respect to Link state, router, interface and the  LSA type
.1.3.6.1.4.1.11.2.14.11.5.1.14.2.5.2,HP-ICF-OSPF::hpicfOspfFloodGroup,,,,,,This is a normal group that gives checksum,sequence and age related information 
.1.3.6.1.4.1.11.2.14.11.5.1.14.3,HP-ICF-OSPF::hpicfOspfRouteGroup,,,,,,
.1.3.6.1.4.1.11.2.14.11.5.1.14.3.1,HP-ICF-OSPF::hpicfOspfNssaType1,,,,,,
.1.3.6.1.4.1.11.2.14.11.5.1.14.3.2,HP-ICF-OSPF::hpicfOspfNssaType2,,,,,,
.1.3.6.1.4.1.11.2.14.11.5.1.14.4,HP-ICF-OSPF::hpicfOspfIfTable,,not-accessible,,current,,Extensions to the table that contains OSPF Interface specific information.
.1.3.6.1.4.1.11.2.14.11.5.1.14.4.1,HP-ICF-OSPF::hpicfOspfIfEntry,,not-accessible,,current,,A list of extensions to the information maintained for an OSPF interface.
.1.3.6.1.4.1.11.2.14.11.5.1.14.4.1.1,HP-ICF-OSPF::hpicfOspfIfPassive,INTEGER,read-write,,current,true(1):false(2),The passive state configuration of the OSPF interface.  In the passive mode no OSPF protocol messages are exchanged on this interface. true (1) - The interface is configured to work in Passive mode false (2) - The interface is configured to work in normal mode. This is the default configuration. Changing the value will cause OSPF to reset on this interface and make necessary adjustments to the link state database. All other operations are not defined and will not affect the state of the protocol.
.1.3.6.1.4.1.11.2.14.11.5.1.14.4.1.2,HP-ICF-OSPF::hpicfOspfIfNbrCount,Unsigned32,read-only,,current,,This object specifies the number of OSPFv3 neighbors  present in this interface. This counter should be  incremented when a new neighbor is added in the network in  which this interface is present.  It should be decremented when a neighbor is disconnected.
.1.3.6.1.4.1.11.2.14.11.5.1.14.5,HP-ICF-OSPF::hpicfOspfIfStatsTable,,not-accessible,,current,,Table that contains OSPF Interface traffic specific information.
.1.3.6.1.4.1.11.2.14.11.5.1.14.5.1,HP-ICF-OSPF::hpicfOspfIfStatsEntry,,not-accessible,ospfIfIpAddress:ospfAddressLessIf,current,,A list of extensions to the information maintained for an OSPF interface.
.1.3.6.1.4.1.11.2.14.11.5.1.14.5.1.1,HP-ICF-OSPF::hpicfOspfSentHelloPkt,Counter32,read-only,,current,,The number of OSPF Hello packets sent on the  interface. This number is incremented each time an  OSPF Hello packet is sent out of an OSPF enabled  interface. Discontinuities in the value of this counter  can occur at re-initialization of the management  system. The counters can be cleared for any interface using clear ip ospf statistics command.
.1.3.6.1.4.1.11.2.14.11.5.1.14.5.1.2,HP-ICF-OSPF::hpicfOspfSentDDPkt,Counter32,read-only,,current,,The number of Database Description packets sent on  the interface. This number is incremented each time  an OSPF DD packet is sent out of an OSPF enabled  interface. Discontinuities in the value of this counter  can occur at re-initialization of the management  system. The counters can be cleared for any interface using clear ip ospf statistics command.
.1.3.6.1.4.1.11.2.14.11.5.1.14.5.1.3,HP-ICF-OSPF::hpicfOspfSentLSRPkt,Counter32,read-only,,current,,The number of Link State Request packet sent on the interface. This number is incremented each time an OSPF LSR packet is sent out of OSPF enabled interface. Discontinuities in the value of this counter  can occur at re-initialization of the management  system. The counters can be cleared for any interface using clear ip ospf statistics command.
.1.3.6.1.4.1.11.2.14.11.5.1.14.5.1.4,HP-ICF-OSPF::hpicfOspfSentLSUPkt,Counter32,read-only,,current,,The number of Link State Update packet sent on the interface. This number is incremented each time an OSPF LSU packet is sent out of an OSPF enabled interface. Discontinuities in the value of this counter  can occur at re-initialization of the management  system. The counters can be cleared for any interface using clear ip ospf statistics command.
.1.3.6.1.4.1.11.2.14.11.5.1.14.5.1.5,HP-ICF-OSPF::hpicfOspfSentLSAPkt,Counter32,read-only,,current,,The number of Link State Ack packet sent on the interface. This number is incremented each time an OSPF LSA packet is sent out of an OSPF enabled interface. Discontinuities in the value of this counter  can occur at re-initialization of the management  system. The counters can be cleared for any interface using clear ip ospf statistics command.
.1.3.6.1.4.1.11.2.14.11.5.1.14.5.1.6,HP-ICF-OSPF::hpicfOspfRcvdHelloPkt,Counter32,read-only,,current,,The number of Hello packets received on the interface. This number is incremented each time a hello packet is received on OSPF enabled interface.  Discontinuities in the value of this counter  can occur at re-initialization of the management  system. The counters can be cleared for any interface using clear ip ospf statistics command.
.1.3.6.1.4.1.11.2.14.11.5.1.14.5.1.7,HP-ICF-OSPF::hpicfOspfRcvdDDPkt,Counter32,read-only,,current,,The number of Database Description packets received  on the interface. This number is incremented each  time a OSPF DD packet is received on OSPF enabled  interface. Discontinuities in the value of this counter  can occur at re-initialization of the management  system. The counters can be cleared for any interface using clear ip ospf statistics command.
.1.3.6.1.4.1.11.2.14.11.5.1.14.5.1.8,HP-ICF-OSPF::hpicfOspfRcvdLSRPkt,Counter32,read-only,,current,,The number of Link State Request packets received  on the interface. This number is incremented each  time a OSPF LSR packet is received on OSPF enabled  interface. Discontinuities in the value of this counter  can occur at re-initialization of the management  system. The counters can be cleared for any interface using clear ip ospf statistics command.
.1.3.6.1.4.1.11.2.14.11.5.1.14.5.1.9,HP-ICF-OSPF::hpicfOspfRcvdLSUPkt,Counter32,read-only,,current,,The number of Link State Update packets received  on the interface. This number is incremented each  time a OSPF LSU packet is received on OSPF enabled  interface.
.1.3.6.1.4.1.11.2.14.11.5.1.14.5.1.10,HP-ICF-OSPF::hpicfOspfRcvdLSAPkt,Counter32,read-only,,current,,The number of Link State Ack packets received  on the interface. This number is incremented each  time a OSPF LSA packet is received on OSPF enabled  interface. Discontinuities in the value of this counter  can occur at re-initialization of the management  system. The counters can be cleared for any interface using clear ip ospf statistics command.
.1.3.6.1.4.1.11.2.14.11.5.1.14.6,HP-ICF-OSPF::hpicfOspfIfErrorTable,,not-accessible,,current,,Table that contains OSPF Interface traffic specific information.
.1.3.6.1.4.1.11.2.14.11.5.1.14.6.1,HP-ICF-OSPF::hpicfOspfIfErrorEntry,,not-accessible,ospfIfIpAddress:ospfAddressLessIf:hpicfOspfIfErrorType,current,,A list of extensions to the information maintained for an OSPF interface.
.1.3.6.1.4.1.11.2.14.11.5.1.14.6.1.1,HP-ICF-OSPF::hpicfOspfIfErrorType,Integer32,not-accessible,,current,,The hpicfOspfIfErrorType refers to the type of errors  in the OSPF packet received on any OSPF enabled  interface. Errors could be Invalid RouterID/ AreaID Checksum error, OutOfbound Error ...
.1.3.6.1.4.1.11.2.14.11.5.1.14.6.1.2,HP-ICF-OSPF::hpicfOspfIfErrorCount,Counter32,read-only,,current,,The hpicfOspfErrorCount is count of each type  error packet received on an OSPF interface. Discontinuities in the value of this counter  can occur at re-initialization of the management  system. The counters can be cleared for any interface using clear ip ospf statistics command.
.1.3.6.1.4.1.11.2.14.11.5.1.14.7,HP-ICF-OSPF::hpicfOspfIfClearStatsTable,,not-accessible,,current,,A list used to clear statistics information maintained for an OSPF interface.
.1.3.6.1.4.1.11.2.14.11.5.1.14.7.1,HP-ICF-OSPF::hpicfOspfIfClearStatsEntry,,not-accessible,ospfIfIpAddress:ospfAddressLessIf,current,,A list used to clear statistics information maintained for an OSPF interface.
.1.3.6.1.4.1.11.2.14.11.5.1.14.7.1.1,HP-ICF-OSPF::hpicfOspfClearCounters,INTEGER,read-write,,current,true(1):false(2),Read of this will always be false, When this variable is set  to true for a given Ipaddress interface, corresponding  interface counters will be cleared.
.1.3.6.1.4.1.11.2.14.11.5.1.14.8,HP-ICF-OSPF::hpicfOspfSpfTable,,not-accessible,,current,,Table that contains OSPF SPF information.
.1.3.6.1.4.1.11.2.14.11.5.1.14.8.1,HP-ICF-OSPF::hpicfOspfSpfEntry,,not-accessible,hpicfOspfSpfInstance,current,,A list of extensions to the information maintained for OSPF SPF runs.
.1.3.6.1.4.1.11.2.14.11.5.1.14.8.1.1,HP-ICF-OSPF::hpicfOspfSpfInstance,Integer32,not-accessible,,current,,The hpicfospfSpfInstance refers to the instance of SPF Shortest Path First ran for an OSPF instance.
.1.3.6.1.4.1.11.2.14.11.5.1.14.8.1.2,HP-ICF-OSPF::hpicfOspfSpfReason,Integer32,read-only,,current,,The hpicfOspfSpfReason refers to the reason for  scheduling an SPF run. Reasons could be OSPF init,  adding/deleting interface, linkStateUpdate received.. Only last ten SPF run's reasons will be saved.
.1.3.6.1.4.1.11.2.14.11.5.1.14.8.1.3,HP-ICF-OSPF::hpicfOspfSpfTime,Integer32,read-only,,current,,The hpicfOspfSpfTime refers to the time at which  SPF run is scheduled. Reasons could be OSPF init,  adding/deleting interface, linkStateUpdate received.. Only last ten SPF run's reasons will be saved.
.1.3.6.1.4.1.11.2.14.11.5.1.14.9,HP-ICF-OSPF::hpicfOspfReqTable,,not-accessible,,current,,Request List table that contains OSPF  Specific interface information.
.1.3.6.1.4.1.11.2.14.11.5.1.14.9.1,HP-ICF-OSPF::hpicfOspfReqEntry,,not-accessible,ospfIfIpAddress:ospfAddressLessIf,current,,A Request List entries that contain fields of link state advertisement.
.1.3.6.1.4.1.11.2.14.11.5.1.14.9.1.1,HP-ICF-OSPF::hpicfOspfReqType,INTEGER,read-only,,current,routerLink(1):networkLink(2):summaryLink(3):asSummaryLink(4):asExternalLink(5):multicastLink(6):nssaExternalLink(7):areaOpaqueLink(10),The type of the Request List's link state advertisement. Each link state type has a separate advertisement format.
.1.3.6.1.4.1.11.2.14.11.5.1.14.9.1.2,HP-ICF-OSPF::hpicfOspfReqLsid,IpAddress,read-only,,current,,The Request List's Link State ID is an LS Type Specific field containing either a Router ID or an IP address; it identifies the piece of the routing domain that is being described by the advertisement.
.1.3.6.1.4.1.11.2.14.11.5.1.14.9.1.3,HP-ICF-OSPF::hpicfOspfReqRouterId,IpAddress,read-only,,current,,The 32-bit number that uniquely identifies the originating router in the Autonomous System.
.1.3.6.1.4.1.11.2.14.11.5.1.14.9.1.4,HP-ICF-OSPF::hpicfOspfReqSequence,Integer32,read-only,,current,,The Request List's sequence number field is a signed 32-bit integer. It starts with the value '80000001'h, or -'7FFFFFFF'h, and increments until '7FFFFFFF'h. Thus, a typical sequence number will be very negative. It is used to detect old and duplicate Link State Advertisements. The space of sequence numbers is linearly ordered. The larger the sequence number, the more recent the advertisement.
.1.3.6.1.4.1.11.2.14.11.5.1.14.9.1.5,HP-ICF-OSPF::hpicfOspfReqAge,Integer32,read-only,,current,,This Request list's field is the age of the link state advertisement in seconds.
.1.3.6.1.4.1.11.2.14.11.5.1.14.9.1.6,HP-ICF-OSPF::hpicfOspfReqChecksum,Integer32,read-only,,current,,This Request list's field is the checksum of the complete contents of the advertisement, excepting the age field. The age field is excepted so that an advertisement's age can be incremented without updating the checksum. The checksum used is the same that is used for ISO connectionless datagram's; it is commonly referred to as the Fletcher checksum.
.1.3.6.1.4.1.11.2.14.11.5.1.14.10,HP-ICF-OSPF::hpicfOspfRetransTable,,not-accessible,,current,,Retransmission List table that contains Ospf Interface Specific information.
.1.3.6.1.4.1.11.2.14.11.5.1.14.10.1,HP-ICF-OSPF::hpicfOspfRetransEntry,,not-accessible,ospfIfIpAddress:ospfAddressLessIf,current,,Retransmission list entry that is maintained for an OSPF Interface.
.1.3.6.1.4.1.11.2.14.11.5.1.14.10.1.1,HP-ICF-OSPF::hpicfOspfRetransType,INTEGER,read-only,,current,routerLink(1):networkLink(2):summaryLink(3):asSummaryLink(4):asExternalLink(5):multicastLink(6):nssaExternalLink(7):areaOpaqueLink(10),The Retransmission List LSA type. Each link state type has a separate advertisement format.
.1.3.6.1.4.1.11.2.14.11.5.1.14.10.1.2,HP-ICF-OSPF::hpicfOspfRetransLsid,IpAddress,read-only,,current,,The Retransmission List Link State ID is an LS Type Specific field containing either a Router ID or an IP address; it identifies the piece of the routing domain that is being described by the advertisement.
.1.3.6.1.4.1.11.2.14.11.5.1.14.10.1.3,HP-ICF-OSPF::hpicfOspfRetransRouterId,IpAddress,read-only,,current,,The 32-bit number that uniquely identifies the originating Retransmission List router in the Autonomous System.
.1.3.6.1.4.1.11.2.14.11.5.1.14.10.1.4,HP-ICF-OSPF::hpicfOspfRetransSequence,Integer32,read-only,,current,,The Retransmission List sequence number field is a signed 32-bit integer. It starts with the value '80000001'h, or -'7FFFFFFF'h, and increments until '7FFFFFFF'h. Thus, a typical sequence number will be very negative. It is used to detect old and duplicate Link State Advertisements. The space of sequence numbers is linearly ordered. The larger the sequence number, the more recent the advertisement.
.1.3.6.1.4.1.11.2.14.11.5.1.14.10.1.5,HP-ICF-OSPF::hpicfOspfRetransAge,Integer32,read-only,,current,,This Retransmission List field is the age of the link state advertisement in seconds.
.1.3.6.1.4.1.11.2.14.11.5.1.14.10.1.6,HP-ICF-OSPF::hpicfOspfRetransChecksum,Integer32,read-only,,current,,This Retransmission field is the checksum of the complete contents of the advertisement, excepting the age field. The age field is excepted so that an advertisement's age can be incremented without updating the checksum. The checksum used is the same that is used for ISO connectionless datagram's; it is commonly referred to as the Fletcher checksum.
.1.3.6.1.4.1.11.2.14.11.5.1.14.11,HP-ICF-OSPF::hpicfOspfFloodTable,,not-accessible,,current,,Flood list table that contains Ospf Interface Specific information
.1.3.6.1.4.1.11.2.14.11.5.1.14.11.1,HP-ICF-OSPF::hpicfOspfFloodEntry,,not-accessible,ospfIfIpAddress:ospfAddressLessIf,current,,A Flood list information maintained for an OSPF Interface
.1.3.6.1.4.1.11.2.14.11.5.1.14.11.1.1,HP-ICF-OSPF::hpicfOspfFloodType,INTEGER,read-only,,current,routerLink(1):networkLink(2):summaryLink(3):asSummaryLink(4):asExternalLink(5):multicastLink(6):nssaExternalLink(7):areaOpaqueLink(10),The flood list LSA type .Each link state type has a separate advertisement format.
.1.3.6.1.4.1.11.2.14.11.5.1.14.11.1.2,HP-ICF-OSPF::hpicfOspfFloodLsid,IpAddress,read-only,,current,,The flood list Link State ID is an LS Type Specific field containing either a Router ID or an IP address; it identifies the piece of the routing domain that is being described by the advertisement.
.1.3.6.1.4.1.11.2.14.11.5.1.14.11.1.3,HP-ICF-OSPF::hpicfOspfFloodRouterId,IpAddress,read-only,,current,,The 32-bit number that uniquely identifies the originating flood list router in the Autonomous System.
.1.3.6.1.4.1.11.2.14.11.5.1.14.11.1.4,HP-ICF-OSPF::hpicfOspfFloodSequence,Integer32,read-only,,current,,The flood list sequence number field is a signed 32-bit integer. It starts with the value '80000001'h, or -'7FFFFFFF'h, and increments until '7FFFFFFF'h. Thus, a typical sequence number will be very negative. It is used to detect old and duplicate Link State Advertisements. The space of sequence numbers is linearly ordered. The larger the sequence number, the more recent the advertisement.
.1.3.6.1.4.1.11.2.14.11.5.1.14.11.1.5,HP-ICF-OSPF::hpicfOspfFloodAge,Integer32,read-only,,current,,This flood list field is the age of the link state advertisement in seconds.
.1.3.6.1.4.1.11.2.14.11.5.1.14.11.1.6,HP-ICF-OSPF::hpicfOspfFloodChecksum,Integer32,read-only,,current,,This flood list field is the checksum of the complete contents of the advertisement, excepting the age field. The age field is excepted so that an advertisement's age can be incremented without updating the checksum. The checksum used is the same that is used for ISO connectionless datagram's; it is commonly referred to as the Fletcher checksum.
.1.3.6.1.4.1.11.2.14.11.5.1.14.12,HP-ICF-OSPF::hpicfOspfSpfTimerElapsed,Unsigned32,read-only,,current,,The elapsed time since the last Ospf Spf is run
.1.3.6.1.4.1.11.2.14.11.5.1.14.14,HP-ICF-OSPF::hpicfOspfAreaLsdbTable,,not-accessible,,current,,The OSPF Process's Area-Scope LSDB.  The LSDB contains the Area-Scope Link State  Advertisements from throughout the area that the  device is attached to.
.1.3.6.1.4.1.11.2.14.11.5.1.14.14.1,HP-ICF-OSPF::hpicfOspfAreaLsdbEntry,,not-accessible,,current,,A single Area-Scope Link State Advertisement.
.1.3.6.1.4.1.11.2.14.11.5.1.14.14.1.1,HP-ICF-OSPF::hpicfOspfAreaLsdbRtrCapBits,Unsigned32,read-only,,current,,This field is valid if the LSA is a Router LSA. It uniquely identifies the router type of the router in the Area.
.1.3.6.1.4.1.11.2.14.11.5.1.14.14.1.2,HP-ICF-OSPF::hpicfOspfAreaLsdbOptions,Unsigned32,read-only,,current,,The Options field enables OSPF routers to support (or not support) optional capabilities, and to communicate their capability level to other OSPF routers. This field is valid for each type of LSA.
.1.3.6.1.4.1.11.2.14.11.5.1.14.14.1.3,HP-ICF-OSPF::hpicfOspfAreaLsdbMetric,Integer32,read-only,,current,,This field is valid if the LSA is a Router LSA, a Summary LSA, AS Summary LSA or a NSSA LSA. 
.1.3.6.1.4.1.11.2.14.11.5.1.14.14.1.4,HP-ICF-OSPF::hpicfOspfAreaLsdbAddrPrefix,Unsigned32,read-only,,current,,The Prefix the Address.
.1.3.6.1.4.1.11.2.14.11.5.1.14.14.1.5,HP-ICF-OSPF::hpicfOspfAreaLsdbFwdingAddress,Unsigned32,read-only,,current,,This field is valid if the LSA is a NSSA LSA.  This field is present only if the 'F' Bit is set in the 
.1.3.6.1.4.1.11.2.14.11.5.1.14.14.1.6,HP-ICF-OSPF::hpicfOspfAreaLsdbExtRouteTags,Unsigned32,read-only,,current,,This field is valid if the LSA is a NSSA LSA. This field is present only if the 'T' Bit is set in the EFT flags field. A 32-bit field which may be used to communicate additional information between AS boundary routers.
.1.3.6.1.4.1.11.2.14.11.5.1.14.14.1.7,HP-ICF-OSPF::hpicfOspfTOS,Unsigned32,read-only,,current,,The 32-bit identifier for the TOS specific information  of the LSA.
.1.3.6.1.4.1.11.2.14.11.5.1.14.14.1.8,HP-ICF-OSPF::hpicfOspfLsdbRouterLinks,Unsigned32,read-only,,current,,This field is valid if the LSA is Router LSA. It holds the 
.1.3.6.1.4.1.11.2.14.11.5.1.14.14.1.9,HP-ICF-OSPF::hpicfOspfLsdbBitE,Unsigned32,read-only,,current,,The 32-bit identifier for the Metric specific information  of the LSA.
.1.3.6.1.4.1.11.2.14.11.5.1.14.15,HP-ICF-OSPF::hpicfOspfRouterLSATable,,not-accessible,,current,,This table having Area scope is a dependent-expansion table for the Router LSA entry in the Area LSDB table. It represents the list of per interface details advertised in a Router LSA.
.1.3.6.1.4.1.11.2.14.11.5.1.14.15.1,HP-ICF-OSPF::hpicfOspfRouterLSAEntry,,not-accessible,ospfLsdbAreaId:ospfLsdbType:ospfLsdbLsid:ospfLsdbRouterId:hpicfOspfRouterLSANbrRtrId,current,,A single Area-Scope Link State Advertisement.
.1.3.6.1.4.1.11.2.14.11.5.1.14.15.1.1,HP-ICF-OSPF::hpicfOspfRouterLSANbrRtrId,Unsigned32,not-accessible,,current,,The router id of the router which is connected over the interface Id.
.1.3.6.1.4.1.11.2.14.11.5.1.14.15.1.2,HP-ICF-OSPF::hpicfOspfRouterLSAIfType,Unsigned32,read-only,,current,,The 32-bit identifier of the Area from which the  LSA was received.
.1.3.6.1.4.1.11.2.14.11.5.1.14.15.1.3,HP-ICF-OSPF::hpicfOspfRouterLSAMetric,Integer32,read-only,,current,,This field indicates the cost involved in using the  interface or route.
.1.3.6.1.4.1.11.2.14.11.5.1.14.15.1.4,HP-ICF-OSPF::hpicfOspfRouterLSAIfId,Unsigned32,read-only,,current,,The interface Id of the router that connects to the other router.
.1.3.6.1.4.1.11.2.14.11.5.1.14.15.1.5,HP-ICF-OSPF::hpicfOspfRouterLSATOSMetric,Unsigned32,read-only,,current,,This field indicates the cost involved in using the interface 
.1.3.6.1.4.1.11.2.14.11.5.1.14.16,HP-ICF-OSPF::hpicfOspfNetworkLSATable,,not-accessible,,current,,This table having Area scope is a dependent-expansion table for the Network LSA entry in the Area LSDB table. This table represents the list of routers advertised in a Network LSA.
.1.3.6.1.4.1.11.2.14.11.5.1.14.16.1,HP-ICF-OSPF::hpicfOspfNetworkLSAEntry,,not-accessible,ospfLsdbAreaId:ospfLsdbType:ospfLsdbLsid:ospfLsdbRouterId:hpicfOspfNetworkLSASeqNum,current,,A single Area-Scope Link State Advertisement.
.1.3.6.1.4.1.11.2.14.11.5.1.14.16.1.1,HP-ICF-OSPF::hpicfOspfNetworkLSASeqNum,Unsigned32,not-accessible,,current,,The 32-bit sequence number identifying the attached router-ids.
.1.3.6.1.4.1.11.2.14.11.5.1.14.16.1.2,HP-ICF-OSPF::hpicfOspfNetworkLSAAttachedRouter,Unsigned32,read-only,,current,,The 32-bit Router identifier of the attached Router.
.1.3.6.1.4.1.11.2.14.11.5.1.14.17,HP-ICF-OSPF::hpicfOspfExtLsdbTable,,not-accessible,,current,,The OSPF Process's AS-Scope Link State Database  (LSDB). The LSDB contains the AS-Scope Link State  Advertisements from throughout the areas that the  device is attached to.
.1.3.6.1.4.1.11.2.14.11.5.1.14.17.1,HP-ICF-OSPF::hpicfOspfExtLsdbEntry,,not-accessible,,current,,A single AS-Scope Link State Advertisement.
.1.3.6.1.4.1.11.2.14.11.5.1.14.17.1.1,HP-ICF-OSPF::hpicfOspfExtLsdbMetric,Unsigned32,read-only,,current,,The cost associated with this route.
.1.3.6.1.4.1.11.2.14.11.5.1.14.17.1.2,HP-ICF-OSPF::hpicfOspfExtLsdbOptions,Unsigned32,read-only,,current,,The Options field enables OSPF routers to support (or not support) optional capabilities, and to communicate their capability level to other OSPF routers.
.1.3.6.1.4.1.11.2.14.11.5.1.14.17.1.3,HP-ICF-OSPF::hpicfOspfExtLsdbFwdingAddress,Unsigned32,read-only,,current,,If included, Data traffic for the advertised destination will be forwarded to this address.
.1.3.6.1.4.1.11.2.14.11.5.1.14.17.1.4,HP-ICF-OSPF::hpicfOspfExtLsdbExtRouteTags,Unsigned32,read-only,,current,,The 32-bit Router Tags for the advertised Route.
.1.3.6.1.4.1.11.2.14.11.5.1.14.17.1.5,HP-ICF-OSPF::hpicfOspfExtLsdbBitE,Unsigned32,read-only,,current,,The type of External metric. If bit E is set, the metric
.1.3.6.1.4.1.11.2.14.11.5.1.15,HP-ICF-OID::hpicfIpRouting,,,,,,
.1.3.6.1.4.1.11.2.14.11.5.1.15.1,HP-ICF-IP-ROUTING::hpicfIpRoutingObjects,,,,,,
.1.3.6.1.4.1.11.2.14.11.5.1.15.1.1,HP-ICF-IP-ROUTING::hpicfIcmpRdisc,,,,,,
.1.3.6.1.4.1.11.2.14.11.5.1.15.1.1.1,HP-ICF-IP-ROUTING::hpicfRdiscAdminStatus,INTEGER,read-write,,current,enable(1):disable(2),The administrative status of the ICMP Router Discovery protocol.
.1.3.6.1.4.1.11.2.14.11.5.1.15.1.1.2,HP-ICF-IP-ROUTING::hpicfRdiscIfCfgTable,,not-accessible,,current,,Per-interface configuration for the ICMP Router Discovery protocol.
.1.3.6.1.4.1.11.2.14.11.5.1.15.1.1.2.1,HP-ICF-IP-ROUTING::hpicfRdiscIfCfgEntry,,not-accessible,ifIndex,current,,Router discovery configuration information for a single interface.
.1.3.6.1.4.1.11.2.14.11.5.1.15.1.1.2.1.1,HP-ICF-IP-ROUTING::hpicfRdiscIfAdminStatus,INTEGER,read-write,,current,enable(1):disable(2),The administrative status of the ICMP Router Discovery protocol on this interface.
.1.3.6.1.4.1.11.2.14.11.5.1.15.1.1.2.1.2,HP-ICF-IP-ROUTING::hpicfRdiscIfAdvertAddress,INTEGER,read-write,,current,multicast(1):broadcast(2),The destination address to be used for router advertisements on this interface. If the value of this object is 'multicast' (the default), router advertisements sent on this interface will be sent to the all-hosts multicast address, 224.0.0.1. If the value of this object is 'broadcast', router advertisements sent on this interface will be sent to the limited broadcast address, 255.255.255.255.
.1.3.6.1.4.1.11.2.14.11.5.1.15.1.1.2.1.3,HP-ICF-IP-ROUTING::hpicfRdiscIfMaxAdvertInterval,Integer32,read-write,,current,,The maximum time allowed between sending unsolicited Router Advertisements on this interface.
.1.3.6.1.4.1.11.2.14.11.5.1.15.1.1.2.1.4,HP-ICF-IP-ROUTING::hpicfRdiscIfMinAdvertInterval,Integer32,read-write,,current,,The minimum time allowed between sending unsolicited Router Advertisements on this interface. Must be no greater than hpicfRdiscMaxAdvertInterval.
.1.3.6.1.4.1.11.2.14.11.5.1.15.1.1.2.1.5,HP-ICF-IP-ROUTING::hpicfRdiscIfAdvertLifetime,Integer32,read-write,,current,,The value to be placed in the Lifetime field of Router Advertisements sent on this interface. Must be no less than hpicfRdiscMaxAdvertInterval.
.1.3.6.1.4.1.11.2.14.11.5.1.15.1.1.2.1.6,HP-ICF-IP-ROUTING::hpicfRdiscIfPreference,Integer32,read-write,,current,,The preference of the router as a default router, relative to the other routers on the same subnet. Higher values are more preferable. The minimum value (0x80000000) is used to indicate that the router, even though it may be advertised, is not to be used by neighboring hosts as a default router.
.1.3.6.1.4.1.11.2.14.11.5.1.15.1.2,HP-ICF-IP-ROUTING::hpicfIcmpRateLimits,,,,,,
.1.3.6.1.4.1.11.2.14.11.5.1.15.1.2.1,HP-ICF-IP-ROUTING::hpicfIcmpBoxLimits,,,,,,
.1.3.6.1.4.1.11.2.14.11.5.1.15.1.2.1.1,HP-ICF-IP-ROUTING::hpicfIcmpReplyLimitEnable,INTEGER,read-write,,current,enable(1):disable(2),Enable/Disable ICMP replies.
.1.3.6.1.4.1.11.2.14.11.5.1.15.1.2.1.2,HP-ICF-IP-ROUTING::hpicfIcmpReplyLimit,Integer32,read-write,,current,,The maximum number of icmp replies to send per second.
.1.3.6.1.4.1.11.2.14.11.5.1.15.1.2.1.3,HP-ICF-IP-ROUTING::hpicfIcmpRedirectEnable,INTEGER,read-write,,current,enable(1):disable(2),Enable/Disable redirect error messages..
.1.3.6.1.4.1.11.2.14.11.5.1.15.1.2.1.4,HP-ICF-IP-ROUTING::hpicfIcmpDestUnreachEnable,INTEGER,read-write,,current,enable(1):disable(2),Enable/Disable destination unreachable error messages.
.1.3.6.1.4.1.11.2.14.11.5.1.15.1.2.1.5,HP-ICF-IP-ROUTING::hpicfIcmpAddrMaskReplyEnable,INTEGER,read-write,,current,enable(1):disable(2),Enable/Disable address mask replies.
.1.3.6.1.4.1.11.2.14.11.5.1.15.1.2.1.6,HP-ICF-IP-ROUTING::hpicfIcmpEchoBroadcastReplyEnable,INTEGER,read-write,,current,enable(1):disable(2),Enable/Disable echo replies to directed  broadcast echo requests..
.1.3.6.1.4.1.11.2.14.11.5.1.15.1.3,HP-ICF-IP-ROUTING::hpicfGlobalIpConfig,,,,,,
.1.3.6.1.4.1.11.2.14.11.5.1.15.1.3.1,HP-ICF-IP-ROUTING::hpicfDBroadcastFwdEnable,INTEGER,read-write,,current,enable(1):disable(2),Enable/disable directed broadcast forwarding.
.1.3.6.1.4.1.11.2.14.11.5.1.15.1.3.2,HP-ICF-IP-ROUTING::hpicfSourceRouteEnable,INTEGER,read-write,,current,enable(1):disable(2),Enable/disable source routed forwarding.
.1.3.6.1.4.1.11.2.14.11.5.1.15.1.3.3,HP-ICF-IP-ROUTING::hpicfIpMaximumPaths,Integer32,read-write,,current,,Maximum number of equal cost paths to a destination that we will add to the IP routing table.
.1.3.6.1.4.1.11.2.14.11.5.1.15.1.4,HP-ICF-IP-ROUTING::hpicfIpStaticRouteConfig,,,,,,
.1.3.6.1.4.1.11.2.14.11.5.1.15.1.4.1,HP-ICF-IP-ROUTING::hpicfIpStaticRouteTable,,not-accessible,,current,,Table of configured IP static routes. This table uses a protocol-independent format, so that it can be used for both IPv4 and IPv6 static routes. Rows configured in this table should be stored in non-volatile storage.
.1.3.6.1.4.1.11.2.14.11.5.1.15.1.4.1.1,HP-ICF-IP-ROUTING::hpicfIpStaticRouteEntry,,not-accessible,hpicfIpStaticRoutePrefixType:hpicfIpStaticRoutePrefix:hpicfIpStaticRoutePrefixLength:hpicfIpStaticRouteFwdAddrType:hpicfIpStaticRouteFwdAddr:hpicfIpStaticRouteFwdIfIndex,current,,A row in the static route table, containing information about a single configured static route. There are 3 legal cases for the indexing this table: 1. ((hpicfIpStaticRouteFwdAddrType == hpicfIpStaticRoutePrefixType) && (hpicfIpStaticRouteFwdAddr is IP address of appropriate type) && (hpicfIpStaticRouteFwdIfIndex == 0)) Normal, remote static route. hpicfIpStaticRouteType will be equal to 'remote'. Note that the first condition that the FwdAddrType must equal the PrefixType exactly is not strictly true. For example, in IPv6, it is quite legal and expected to configure a static route where the PrefixType is ipv6, and the Prefix is a 16 byte IPv6 destination address, but the FwdAddrType is ipv6z and the FwdAddr is a 20 byte scoped IPv6 link-local address. 2. ((hpicfIpStaticRouteFwdAddrType == 'unknown') && (hpicfIpStaticRouteFwdAddr == zero-length string) && (hpicfIpStaticRouteFwdIfIndex != 0)) Interface route. Treated like a connected route. hpicfIpStaticRouteType will be equal to 'local'. 3. ((hpicfIpStaticRouteFwdAddrType == 'unknown') && (hpicfIpStaticRouteFwdAddr == zero-length string) && (hpicfIpStaticRouteFwdIfIndex == 0)) Discard route. hpicfStaticRouteType will be equal to either 'reject' or 'discard'.
.1.3.6.1.4.1.11.2.14.11.5.1.15.1.4.1.1.1,HP-ICF-IP-ROUTING::hpicfIpStaticRoutePrefixType,INTEGER,not-accessible,,current,unknown(0):ipv4(1):ipv6(2):ipv4z(3):ipv6z(4):dns(16),The type of destination prefix specified by this route. The value 'dns(16)' is not supported. This object specifies the type of destination address prefix in the hpicfIpStaticRoutePrefix object.
.1.3.6.1.4.1.11.2.14.11.5.1.15.1.4.1.1.2,HP-ICF-IP-ROUTING::hpicfIpStaticRoutePrefix,OCTET,not-accessible,,current,,The destination address prefix of this route. The type of address specified by this route is indicated by the corresponding instance of the hpicfIpStaticRoutePrefixType object. An attempt to create a row in which the length of this object is not consistent with the type specified by hpicfIpStaticRoutePrefixType must be rejected. An attempt to create a row in which the value X of this object, logically ANDed with the value of the mask formed from the corresponding instance of the hpicfIpStaticRoutePrefixLength object, is not equal to X must be rejected, i.e., this prefix may not have any 'host' bits set.
.1.3.6.1.4.1.11.2.14.11.5.1.15.1.4.1.1.3,HP-ICF-IP-ROUTING::hpicfIpStaticRoutePrefixLength,Unsigned32,not-accessible,,current,,This object indicates the number of leading one bits which form the mask to be logically ANDed with a destination address before comparison with the corresponding instance of the hpicfIpStaticRoutePrefix object for a route match operation. An attempt to create a row in which the value of this object is longer than the maximum legal length of an address of the type indicated by the corresponding instance of the hpicfIpStaticRoutePrefixType object must be rejected. An attempt to create a row in which the value of the mask formed from this object logically ANDed with the value of the corresponding instance of the hpicfIpStaticRoutePrefix object is not equal to the hpicfIpStaticRoutePrefix.
.1.3.6.1.4.1.11.2.14.11.5.1.15.1.4.1.1.4,HP-ICF-IP-ROUTING::hpicfIpStaticRouteFwdAddrType,INTEGER,not-accessible,,current,unknown(0):ipv4(1):ipv6(2):ipv4z(3):ipv6z(4):dns(16),The type of forwarding address for this route. The value of this object must be equal either to 'unknown' or to a value appropriate for the corresponding instance of the hpicfIpStaticRoutePrefixType object. For non-remote routes, the value of this object must be 'unknown'.
.1.3.6.1.4.1.11.2.14.11.5.1.15.1.4.1.1.5,HP-ICF-IP-ROUTING::hpicfIpStaticRouteFwdAddr,OCTET,not-accessible,,current,,For remote routes, the value of the next specified router to use for forwarding packets to the destination specified by this route. Note that this router does not need to be directly connected. In the case where it is not, the actual routing table entry will use a next hop determined by looking up the best route to this forwarding address. For non-remote routes, the value of this object will be a zero-length string. An attempt to create a row in which the length of this object is not consistent with the type specified by hpicfIpStaticRouteFwdAddrType must be rejected. An attempt to create a row with a value for this object other than a zero-length string must be rejected if the corresponding instance of the hpicfIpStaticRouteFwdIfIndex object is non-zero.
.1.3.6.1.4.1.11.2.14.11.5.1.15.1.4.1.1.6,HP-ICF-IP-ROUTING::hpicfIpStaticRouteFwdIfIndex,Integer32,not-accessible,,current,,For remote routes, the value of this object must be zero. For reject or blackhole routes, the value of this object must be zero. For local routes, this object indicates the ifIndex of the local interface to use to reach this destination.
.1.3.6.1.4.1.11.2.14.11.5.1.15.1.4.1.1.7,HP-ICF-IP-ROUTING::hpicfIpStaticRouteType,INTEGER,read-create,,current,other(1):reject(2):local(3):remote(4):blackhole(5),The type of route. The value 'other' is not supported, and is included only for compatibility with the IP Forwarding Table MIB. The value 'local' indicates that the destination is treated as if it were directly connected. The value 'remote' indicates that the forwarding address will be used to reach the destination. The value 'reject' indicates that if this route is matched, a packet to the destination is discarded and a notification (e.g. ICMP error) is returned to the packet sender. The value 'blackhole' indicates that if the route is matched, a packet to the destination is silently dropped. The value of this object must be consistent with the forwarding address information used to index the route.
.1.3.6.1.4.1.11.2.14.11.5.1.15.1.4.1.1.8,HP-ICF-IP-ROUTING::hpicfIpStaticRouteDistance,Integer32,read-create,,current,,The administrative distance to associate with this static route. Routes with lower distances are preferred. By default, static routes are created with an administrative distance of 1, meaning they are preferred over all routes except directly connected routes. Setting a higher administrative distance for a route can be used for the following reasons: - by configuring multiple static routes to the same destination, one with the default distance and one with a higher distance, one can configure backup static routes - by configuring a static route with an administrative distance higher than the distance for a particular dynamic routing protocol, one can allow a static route to be overridden by dynamic routing information. Routes with an administrative distance of 255 will never be entered in the routing table.
.1.3.6.1.4.1.11.2.14.11.5.1.15.1.4.1.1.9,HP-ICF-IP-ROUTING::hpicfIpStaticRouteTag,Unsigned32,read-create,,current,,Tag value that can be used to filter redistribution of this route via route maps.
.1.3.6.1.4.1.11.2.14.11.5.1.15.1.4.1.1.10,HP-ICF-IP-ROUTING::hpicfIpStaticRouteStatus,INTEGER,read-create,,current,active(1):notInService(2):notReady(3):createAndGo(4):createAndWait(5):destroy(6),Status of this route entry. All writable columns in this table can be modified while the corresponding row is active.
.1.3.6.1.4.1.11.2.14.11.5.1.15.1.4.1.1.11,HP-ICF-IP-ROUTING::hpicfIpStaticRouteMetric,Integer32,read-create,,current,,Metric value for this route. It is used to compare static route with other static routes to the same destination. The acceptable range is from 1 to 255, both inclusive.
.1.3.6.1.4.1.11.2.14.11.5.1.15.1.4.2,HP-ICF-IP-ROUTING::hpicfIpStaticNeighborTable,,not-accessible,,current,,Table of configured IP static neighbors. This table uses a protocol-independent format, so that it can be used for both IPv4 and IPv6 static neighbors. Rows configured in this table should be stored in non-volatile storage.
.1.3.6.1.4.1.11.2.14.11.5.1.15.1.4.2.1,HP-ICF-IP-ROUTING::hpicfIpStaticNeighborEntry,,not-accessible,hpicfIpStaticNeighborIfIndex:hpicfIpStaticNeighborNetAddrType:hpicfIpStaticNeighborNetAddress,current,,A row in the static neighbor table, containing information about a single configured static neighbor.
.1.3.6.1.4.1.11.2.14.11.5.1.15.1.4.2.1.1,HP-ICF-IP-ROUTING::hpicfIpStaticNeighborIfIndex,Integer32,not-accessible,,current,,The ifIndex value for the interface used to reach this neighbor.
.1.3.6.1.4.1.11.2.14.11.5.1.15.1.4.2.1.2,HP-ICF-IP-ROUTING::hpicfIpStaticNeighborNetAddrType,INTEGER,not-accessible,,current,unknown(0):ipv4(1):ipv6(2):ipv4z(3):ipv6z(4):dns(16),The type of network address specified by this entry. Only the values 'ipv4(1)' and 'ipv6(2)' are expected. This object specifies the type of neighbor network address prefix in the hpicfIpStaticNeighborNetAddress object.
.1.3.6.1.4.1.11.2.14.11.5.1.15.1.4.2.1.3,HP-ICF-IP-ROUTING::hpicfIpStaticNeighborNetAddress,OCTET,not-accessible,,current,,The neighbor network address of this configured static neighbor. The type of address specified by this entry is indicated by the corresponding instance of the hpicfIpStaticNeighborNetAddrType object. An attempt to create a row in which the length of this object is not consistent with the type specified by hpicfIpStaticNeighborNetAddrType must be rejected.
.1.3.6.1.4.1.11.2.14.11.5.1.15.1.4.2.1.4,HP-ICF-IP-ROUTING::hpicfIpStaticNeighborPhysAddress,OCTET,read-create,,current,,The media-dependent physical address used to reach this neighbor. The size of this address depends on the media type of the interface identified by hpicfIpStaticNeighborIfIndex.
.1.3.6.1.4.1.11.2.14.11.5.1.15.1.4.2.1.5,HP-ICF-IP-ROUTING::hpicfIpStaticNeighborStatus,INTEGER,read-create,,current,active(1):notInService(2):notReady(3):createAndGo(4):createAndWait(5):destroy(6),Status of this neighbor entry. All writable columns in this table can be modified while the corresponding row is active.
.1.3.6.1.4.1.11.2.14.11.5.1.15.1.5,HP-ICF-IP-ROUTING::hpicfIpRouteStats,,,,,,
.1.3.6.1.4.1.11.2.14.11.5.1.15.1.5.1,HP-ICF-IP-ROUTING::hpicfIpCidrRouteTable,,not-accessible,,current,,HP extensions to the ipCidrRouteTable.
.1.3.6.1.4.1.11.2.14.11.5.1.15.1.5.1.1,HP-ICF-IP-ROUTING::hpicfIpCidrRouteEntry,,not-accessible,,current,,Extended information about a single route.
.1.3.6.1.4.1.11.2.14.11.5.1.15.1.5.1.1.1,HP-ICF-IP-ROUTING::hpicfIpCidrRouteDistance,Integer32,read-only,,current,,The administrative distance of this route.
.1.3.6.1.4.1.11.2.14.11.5.1.15.1.5.2,HP-ICF-IP-ROUTING::hpicfInetCidrRouteTable,,not-accessible,,current,,HP extensions to the inetCidrRouteTable.
.1.3.6.1.4.1.11.2.14.11.5.1.15.1.5.2.1,HP-ICF-IP-ROUTING::hpicfInetCidrRouteEntry,,not-accessible,,current,,Extended information about a single route.
.1.3.6.1.4.1.11.2.14.11.5.1.15.1.5.2.1.1,HP-ICF-IP-ROUTING::hpicfInetCidrRouteDistance,Integer32,read-only,,current,,The administrative distance of this route.
.1.3.6.1.4.1.11.2.14.11.5.1.15.1.5.2.1.2,HP-ICF-IP-ROUTING::hpicfInetCidrRouteInfo,OBJECT,read-only,,current,,A reference to MIB definitions specific to the particular routing protocol which is responsible for this route, as determined by the value specified in the route's inetCidrRouteProto value. If this information is not present, its value should be set to the OBJECT IDENTIFIER { 0 0 }, which is a syntactically valid object identifier, and any implementation conforming to ASN.1 and the Basic Encoding Rules must be able to generate and recognize this value.
.1.3.6.1.4.1.11.2.14.11.5.1.15.1.6,HP-ICF-IP-ROUTING::hpicfArpInfo,,,,,,
.1.3.6.1.4.1.11.2.14.11.5.1.15.1.6.1,HP-ICF-IP-ROUTING::hpicfArpAgingTime,Integer32,read-write,,current,,The timeout period in minutes for aging out an arp entry in the arp cache. Default value is 20 minutes. Allowable values for the HP implementation are 1-1440 and 0. The value of 0 indicates that an infinite ageout is to be used. The value 16666666 minutes (32 years) is  used internally to effectively indicate  an infinite timeout.
.1.3.6.1.4.1.11.2.14.11.5.1.15.1.6.2,HP-ICF-IP-ROUTING::hpicfArpMcastReplies,INTEGER,read-write,,current,enable(1):disable(2),This object is used to enable/disable 
.1.3.6.1.4.1.11.2.14.11.5.1.15.1.7,HP-ICF-IP-ROUTING::hpicfIpDefaultRouterPrefixInfo,,,,,,
.1.3.6.1.4.1.11.2.14.11.5.1.15.1.7.1,HP-ICF-IP-ROUTING::hpicfIpDefaultRouterPrefixTable,,not-accessible,,current,,Table of default routers learnt through auto-config This Table will be used in conjunction of ipDefaultRouterTable  defined in RFC 4293 to get the attributes of the default routers learnt through auto-config
.1.3.6.1.4.1.11.2.14.11.5.1.15.1.7.1.1,HP-ICF-IP-ROUTING::hpicfIpDefaultRouterPrefixEntry,,not-accessible,hpicfIpDefaultRouterAddressType:hpicfIpDefaultRouterAddress:hpicfIpDefaultRouterIfIndex:hpicfIpDefaultRouterPrefixType:hpicfIpDefaultRouterPrefix:hpicfIpDefaultRouterPrefixLength,current,,A row in the default router table, containing information about a single learnt default router
.1.3.6.1.4.1.11.2.14.11.5.1.15.1.7.1.1.1,HP-ICF-IP-ROUTING::hpicfIpDefaultRouterAddressType,INTEGER,not-accessible,,current,unknown(0):ipv4(1):ipv6(2):ipv4z(3):ipv6z(4):dns(16),The address type of the default router. The only supported type is IPV6 as of now
.1.3.6.1.4.1.11.2.14.11.5.1.15.1.7.1.1.2,HP-ICF-IP-ROUTING::hpicfIpDefaultRouterAddress,OCTET,not-accessible,,current,,The address of the default router.
.1.3.6.1.4.1.11.2.14.11.5.1.15.1.7.1.1.3,HP-ICF-IP-ROUTING::hpicfIpDefaultRouterIfIndex,Integer32,not-accessible,,current,,The address of the default router.
.1.3.6.1.4.1.11.2.14.11.5.1.15.1.7.1.1.4,HP-ICF-IP-ROUTING::hpicfIpDefaultRouterPrefixType,INTEGER,not-accessible,,current,unknown(0):ipv4(1):ipv6(2):ipv4z(3):ipv6z(4):dns(16),Type of the prefix.
.1.3.6.1.4.1.11.2.14.11.5.1.15.1.7.1.1.5,HP-ICF-IP-ROUTING::hpicfIpDefaultRouterPrefix,OCTET,not-accessible,,current,,The prefix.
.1.3.6.1.4.1.11.2.14.11.5.1.15.1.7.1.1.6,HP-ICF-IP-ROUTING::hpicfIpDefaultRouterPrefixLength,Unsigned32,not-accessible,,current,,Length of the prefix.
.1.3.6.1.4.1.11.2.14.11.5.1.15.1.7.1.1.7,HP-ICF-IP-ROUTING::hpicfIpDefaultRouterPrefixOnLink,INTEGER,read-only,,current,true(1):false(2),The object has the value true (1) if the prefix can be used for on-link determination, otherwise the value is false(2)
.1.3.6.1.4.1.11.2.14.11.5.1.15.1.7.1.1.8,HP-ICF-IP-ROUTING::hpicfIpDefaultRouterPrefixAutonomous,INTEGER,read-only,,current,true(1):false(2),The object has the value true(1) if this prefix can be used for autonomous address configuration. If the value is false(2), the prefix is not used to autoconfigure a local interface address
.1.3.6.1.4.1.11.2.14.11.5.1.15.1.7.1.1.9,HP-ICF-IP-ROUTING::hpicfIpDefaultRouterPrefixValidLifeTime,Unsigned32,read-only,,current,,The valid life time for the router.
.1.3.6.1.4.1.11.2.14.11.5.1.15.1.7.1.1.10,HP-ICF-IP-ROUTING::hpicfIpDefaultRouterPrefixPrefdLifeTime,Unsigned32,read-only,,current,,The preferred life time for the router.
.1.3.6.1.4.1.11.2.14.11.5.1.15.1.8,HP-ICF-IP-ROUTING::hpicfIpDefaultRouterProperties,,,,,,
.1.3.6.1.4.1.11.2.14.11.5.1.15.1.8.1,HP-ICF-IP-ROUTING::hpicfIpDefaultRouterTable,,not-accessible,,current,,HP extensions to the ipDefaultRouterTable.
.1.3.6.1.4.1.11.2.14.11.5.1.15.1.8.1.1,HP-ICF-IP-ROUTING::hpicfIpDefaultRouterEntry,,not-accessible,,current,,Extended information about a single route.
.1.3.6.1.4.1.11.2.14.11.5.1.15.1.8.1.1.1,HP-ICF-IP-ROUTING::hpicfIpDefaultRouterMTU,Integer32,read-only,,current,,The link MTU size advertised by the router. The selected Mlink TU may be different from this one.
.1.3.6.1.4.1.11.2.14.11.5.1.15.1.8.1.1.2,HP-ICF-IP-ROUTING::hpicfIpDefaultRouterHopLimit,Integer32,read-only,,current,,The hop limit to be used by the host on outgoing packets.
.1.3.6.1.4.1.11.2.14.11.5.1.15.1.9,HP-ICF-IP-ROUTING::hpicfIpv6ND,,,,,,
.1.3.6.1.4.1.11.2.14.11.5.1.15.1.9.1,HP-ICF-IP-ROUTING::hpicfIpv6NDRAAdminStatus,INTEGER,read-write,,current,true(1):false(2),A flag indicating whether or not the router sends periodic router advertisements and responds to router solicitations.
.1.3.6.1.4.1.11.2.14.11.5.1.15.1.9.2,HP-ICF-IP-ROUTING::hpicfIpv6RtrAdvPrefixTable,,not-accessible,,current,,This table describes the router advertisement configuration variables for each interface.
.1.3.6.1.4.1.11.2.14.11.5.1.15.1.9.2.1,HP-ICF-IP-ROUTING::hpicfIpv6RtrAdvPrefixEntry,,not-accessible,hpicfIpv6RtrAdvPrefixIfIndex:hpicfIpv6RtrAdvPrefixType:hpicfIpv6RtrAdvPrefixPrefix:hpicfIpv6RtrAdvPrefixLength,current,,An entry in the hpicfIpv6RtrAdvPrefixTable.
.1.3.6.1.4.1.11.2.14.11.5.1.15.1.9.2.1.1,HP-ICF-IP-ROUTING::hpicfIpv6RtrAdvPrefixIfIndex,Integer32,not-accessible,,current,,The index value which uniquely identifies the interface on which this prefix is configured. The interface identified by a particular value of this index is the same interface as identified by  the same value of the IF-MIB's ifIndex.
.1.3.6.1.4.1.11.2.14.11.5.1.15.1.9.2.1.2,HP-ICF-IP-ROUTING::hpicfIpv6RtrAdvPrefixType,INTEGER,not-accessible,,current,unknown(0):ipv4(1):ipv6(2):ipv4z(3):ipv6z(4):dns(16),The address type of hpicfIpv6RtrAdvPrefixPrefix.
.1.3.6.1.4.1.11.2.14.11.5.1.15.1.9.2.1.3,HP-ICF-IP-ROUTING::hpicfIpv6RtrAdvPrefixPrefix,OCTET,not-accessible,,current,,The address prefix. The address type of this object is specified in hpicfIpv6RtrAdvPrefixType.  The length of this object is the standard length for  objects of that type.
.1.3.6.1.4.1.11.2.14.11.5.1.15.1.9.2.1.4,HP-ICF-IP-ROUTING::hpicfIpv6RtrAdvPrefixLength,Unsigned32,not-accessible,,current,,The prefix length associated with this prefix. The value 0 has no special meaning for this object. It simply refers to address '::/0'.
.1.3.6.1.4.1.11.2.14.11.5.1.15.1.9.2.1.5,HP-ICF-IP-ROUTING::hpicfIpv6RtrAdvPrefixOnLinkFlag,INTEGER,read-create,,current,true(1):false(2),Router Advertisement messages are sent out with the On-Link flag (L-bit) field set to this value.
.1.3.6.1.4.1.11.2.14.11.5.1.15.1.9.2.1.6,HP-ICF-IP-ROUTING::hpicfIpv6RtrAdvPrefixAutonomousFlag,INTEGER,read-create,,current,true(1):false(2),Autonomous address configuration flag. Router Advertisement messages are sent out with  the autonomous flag field set to this value in the Prefix Information.
.1.3.6.1.4.1.11.2.14.11.5.1.15.1.9.2.1.7,HP-ICF-IP-ROUTING::hpicfIpv6RtrAdvPrefixLifetimeType,INTEGER,read-create,,current,fixed(1):realTime(2),Specifies if the  hpicfIpv6RtrAdvPrefixPreferredLifetime and hpicfIpv6RtrAdvPrefixValidLifetime are of  the kind where consecutive advertisements have the same time(fixed) or a time that decrements in real time. The realTime(2) can be used to specify a time in future at which the LifeTimes become zero.
.1.3.6.1.4.1.11.2.14.11.5.1.15.1.9.2.1.8,HP-ICF-IP-ROUTING::hpicfIpv6RtrAdvPrefixPreferredLifetime,Unsigned32,read-create,,current,,The length of time ,in seconds,that this prefix will be  preferred. A value of 4,294,967,295 represents infinity. The Router Advertisement messages are sent out with the Preferred LifeTime field set to this value. To specify in a realTime way,set this object to a future  time in number of seconds since January 1, 1990,  Coordinated Universal Time and also set hpicfIpv6RtrAdvPrefixTimeType to realTime. The default value is 7 days(604800 seconds) fixed time
.1.3.6.1.4.1.11.2.14.11.5.1.15.1.9.2.1.9,HP-ICF-IP-ROUTING::hpicfIpv6RtrAdvPrefixValidLifetime,Unsigned32,read-create,,current,,The length of time, in seconds, that this prefix will continue to be valid, i.e. time until invalidation. A value of 4,294,967,295 represents infinity. The Router advertisement messages are sent out with the Valid LifeTime field set to this value. To specify in a realTime way,set this object to a future time in number of seconds since January 1, 1990,  Coordinated Universal Time and also set hpicfIpv6RtrAdvPrefixTimeType to realTime. The default value is 30 days (or 2592000 seconds) fixed time.
.1.3.6.1.4.1.11.2.14.11.5.1.15.1.9.2.1.10,HP-ICF-IP-ROUTING::hpicfIpv6RtrAdvPrefixRowStatus,INTEGER,read-create,,current,active(1):notInService(2):notReady(3):createAndGo(4):createAndWait(5):destroy(6),The status of this conceptual row. As all objects in this conceptual row have default  values a row can be created and made active by  setting this object appropriately.
.1.3.6.1.4.1.11.2.14.11.5.1.15.1.9.2.1.11,HP-ICF-IP-ROUTING::hpicfIpv6RtrAdvPrefixAdvertiseFlag,INTEGER,read-create,,current,true(1):false(2),Specifies whether the prefix in this entry is advertised
.1.3.6.1.4.1.11.2.14.11.5.1.15.1.9.3,HP-ICF-IP-ROUTING::hpicfIpv6RtrAdvTable,,not-accessible,,current,,This table augments ipv6RouterAdvertEntry and it contains HP proprietary objects for managing router advertisements.
.1.3.6.1.4.1.11.2.14.11.5.1.15.1.9.3.1,HP-ICF-IP-ROUTING::hpicfIpv6RtrAdvEntry,,not-accessible,,current,,An entry in the hpicfIpv6RtrAdvEntry contains Router Advertisement parameters.
.1.3.6.1.4.1.11.2.14.11.5.1.15.1.9.3.1.1,HP-ICF-IP-ROUTING::hpicfIpv6RtrAdvCurHopLimitMode,INTEGER,read-write,,current,global(1):perInterface(2), This object indicates whether the value in ipv6RouterAdvertCurHopLimit is in use or the value in ipv6IpDefaultHopLimit  is in use for an entry in this table. A set to 'global' means:  - ipv6IpDefaultHopLimit value will be used for hop  limit. A set to 'perInterface' means: - ipv6RouterAdvertCurHopLimit value will be used for hop limit.
.1.3.6.1.4.1.11.2.14.11.5.1.15.1.10,HP-ICF-IP-ROUTING::hpicfIpRouteSummary,,,,,,
.1.3.6.1.4.1.11.2.14.11.5.1.15.1.10.1,HP-ICF-IP-ROUTING::hpicfIpRouteSummaryTable,,not-accessible,,current,,IP route summary table in global context.
.1.3.6.1.4.1.11.2.14.11.5.1.15.1.10.1.1,HP-ICF-IP-ROUTING::hpicfIpRouteEntry,,not-accessible,hpicfIpRouteProto,current,,IP route summary table information.
.1.3.6.1.4.1.11.2.14.11.5.1.15.1.10.1.1.1,HP-ICF-IP-ROUTING::hpicfIpRouteProto,INTEGER,not-accessible,,current,connected(1):ipv6(7):ospf2ase(8):rip(9):bgp(10):rdisc6(11):static(12):snmp(13):isis(15):ripng(17):ipv4(18):pim(22):rdisc(23):ospf2(24):ospf2nssa(25):mroute(27):igmpv3(32):pim6(33):mpls(40):vrrp2(42),Protocol names that are enabled and active.
.1.3.6.1.4.1.11.2.14.11.5.1.15.1.10.1.1.2,HP-ICF-IP-ROUTING::hpicfIpRouteCnt,Unsigned32,read-only,,current,,count of active routes per routing protocol.
.1.3.6.1.4.1.11.2.14.11.5.1.15.2,HP-ICF-IP-ROUTING::hpicfIpRoutingConformance,,,,,,
.1.3.6.1.4.1.11.2.14.11.5.1.15.2.1,HP-ICF-IP-ROUTING::hpicfIpRoutingGroups,,,,,,
.1.3.6.1.4.1.11.2.14.11.5.1.15.2.1.1,HP-ICF-IP-ROUTING::hpicfRdiscBaseGroup,,,,,,Basic ICMP Router Discovery configuration objects.
.1.3.6.1.4.1.11.2.14.11.5.1.15.2.1.2,HP-ICF-IP-ROUTING::hpicfRdiscIfCfgGroup,,,,,,A collection of objects allowing per-interface configuration of ICMP Router Discovery operation.
.1.3.6.1.4.1.11.2.14.11.5.1.15.2.1.3,HP-ICF-IP-ROUTING::hpicfIcmpReplyBaseGroup,,,,,,A collection of objects allowing configuration of ICMP Redirect operation.
.1.3.6.1.4.1.11.2.14.11.5.1.15.2.1.4,HP-ICF-IP-ROUTING::hpicfIcmpReplyLimitGroup,,,,,,A collection of objects allowing configuration of ICMP Reply rate limiting.
.1.3.6.1.4.1.11.2.14.11.5.1.15.2.1.5,HP-ICF-IP-ROUTING::hpicfIpRouteCfgGroup,,,,,,A collection of objects allowing configuration of IP global enables.
.1.3.6.1.4.1.11.2.14.11.5.1.15.2.1.6,HP-ICF-IP-ROUTING::hpicfIpStaticRouteGroup,,,,,,A collection of objects for configuring IP static routes.
.1.3.6.1.4.1.11.2.14.11.5.1.15.2.1.7,HP-ICF-IP-ROUTING::hpicfIpStaticNeighborGroup,,,,,,A collection of objects for configuring IP static neighbors.
.1.3.6.1.4.1.11.2.14.11.5.1.15.2.1.8,HP-ICF-IP-ROUTING::hpicfIpCidrRouteGroup,,,,,,A collection of objects for retrieving extended information about routes in the routing table.
.1.3.6.1.4.1.11.2.14.11.5.1.15.2.1.9,HP-ICF-IP-ROUTING::hpicfInetCidrRouteGroup,,,,,,A collection of objects for retrieving extended information about routes in the routing table.
.1.3.6.1.4.1.11.2.14.11.5.1.15.2.1.10,HP-ICF-IP-ROUTING::hpicfArpBaseGroup,,,,,,Basic ARP (address resolution protocol) configuration objects.
.1.3.6.1.4.1.11.2.14.11.5.1.15.2.1.11,HP-ICF-IP-ROUTING::hpicfIpv6RtrAdvPrefixGroup,,,,,,The group of objects in a table for configuring the Router Advertisement options. 
.1.3.6.1.4.1.11.2.14.11.5.1.15.2.1.12,HP-ICF-IP-ROUTING::hpicfIpv6RtrAdvGroup,,,,,,The group of objects in a table for configuring the Router Advertisement options. 
.1.3.6.1.4.1.11.2.14.11.5.1.15.2.1.13,HP-ICF-IP-ROUTING::hpicfGlobalIpConfigGroup,,,,,,The group of objects in a table hp BSD broadcast forwarding enable/disable flags. 
.1.3.6.1.4.1.11.2.14.11.5.1.15.2.1.14,HP-ICF-IP-ROUTING::hpicfIpDefaultRouterGroup,,,,,,The group of objects in a table for default routing.
.1.3.6.1.4.1.11.2.14.11.5.1.15.2.1.15,HP-ICF-IP-ROUTING::hpicfIpv6NDRAAdminGroup,,,,,,This group member is used to enable / disable IPV6 neighbor discovery router advertisement global admin status.
.1.3.6.1.4.1.11.2.14.11.5.1.15.2.1.16,HP-ICF-IP-ROUTING::hpicfIpRouteBaseScalarsGroup,,,,,,This group contains both number of routing entries and number next hobs specified as part of routing table.
.1.3.6.1.4.1.11.2.14.11.5.1.15.2.1.17,HP-ICF-IP-ROUTING::hpicfIpStaticRouteOtherGroup,,,,,,The group of objects for configuring IP static  routes.
.1.3.6.1.4.1.11.2.14.11.5.1.15.2.1.18,HP-ICF-IP-ROUTING::hpicfIpRouteSummaryTableGroup,,,,,,This group contains the count of active routes for each routing protocol.
.1.3.6.1.4.1.11.2.14.11.5.1.15.2.2,HP-ICF-IP-ROUTING::hpicfIpRoutingCompliances,,,,,,
.1.3.6.1.4.1.11.2.14.11.5.1.15.2.2.1,HP-ICF-IP-ROUTING::hpicfIcmpRdiscCompliance,,,,,,The compliance statement for HP Routing switches that support ICMP Router Discovery.
.1.3.6.1.4.1.11.2.14.11.5.1.15.2.2.2,HP-ICF-IP-ROUTING::hpicfIcmpReplyCompliance,,,,,,The compliance statement for HP Routing switches that support ICMP Reply Limiting.
.1.3.6.1.4.1.11.2.14.11.5.1.15.2.2.3,HP-ICF-IP-ROUTING::hpicfIpRouterCompliance,,,,,,The compliance statement for HP Routing switches.
.1.3.6.1.4.1.11.2.14.11.5.1.15.2.2.4,HP-ICF-IP-ROUTING::hpicfArpInfoCompliance,,,,,,The compliance statement for HP Routing switches that support ARP.
.1.3.6.1.4.1.11.2.14.11.5.1.15.2.2.5,HP-ICF-IP-ROUTING::hpicfIpv6RtrAdvPrefixCompliance,,,,,,The compliance statement for HP Routing switches that support Router Advertisements
.1.3.6.1.4.1.11.2.14.11.5.1.15.2.2.6,HP-ICF-IP-ROUTING::hpicfIpv6RtrAdvCompliance,,,,,,The compliance statement for HP Routing switches that support Router Advertisements
.1.3.6.1.4.1.11.2.14.11.5.1.15.2.2.7,HP-ICF-IP-ROUTING::hpicfGlobalIpConfigCompliance,,,,,,The compliance statement for HP Routing switches that support Router Advertisements.
.1.3.6.1.4.1.11.2.14.11.5.1.15.2.2.8,HP-ICF-IP-ROUTING::hpicfIpDefaultRouterCompliance,,,,,,The compliance statement for HP Routing switches that support Router Advertisements.
.1.3.6.1.4.1.11.2.14.11.5.1.15.2.2.9,HP-ICF-IP-ROUTING::hpicfIpv6NDRAAdminCompliance,,,,,,IPV6 neighbor discovery router advertisement global admin status.
.1.3.6.1.4.1.11.2.14.11.5.1.15.2.2.10,HP-ICF-IP-ROUTING::hpicfIpRouteBaseScalarsCompliance,,,,,,This group contains both number of routing entries and number next hobs specified as part of routing table.
.1.3.6.1.4.1.11.2.14.11.5.1.15.2.2.11,HP-ICF-IP-ROUTING::hpicfInetCidrRouteCompliance,,,,,,A collection of objects for retrieving extended information about routes in the routing table.
.1.3.6.1.4.1.11.2.14.11.5.1.15.2.2.12,HP-ICF-IP-ROUTING::hpicfIpRouterOtherCompliance,,,,,,The compliance statement for HP Routing switches.
.1.3.6.1.4.1.11.2.14.11.5.1.15.2.2.13,HP-ICF-IP-ROUTING::hpicfIpRouteSummaryCompliance,,,,,,A collection of objects for active routes.
.1.3.6.1.4.1.11.2.14.11.5.1.15.3,HP-ICF-IP-ROUTING::hpicfIpRouteBaseScalars,,,,,,
.1.3.6.1.4.1.11.2.14.11.5.1.15.3.1,HP-ICF-IP-ROUTING::hpicfIpRouteCount,Unsigned32,read-only,,current,,This parameter specifies total number of routes  in the Routing table.
.1.3.6.1.4.1.11.2.14.11.5.1.15.3.2,HP-ICF-IP-ROUTING::hpicfIpRouteNextHopCount,Unsigned32,read-only,,current,,This parameter specifies total number of next-hop  entries in the Routing table. This parameter is  useful to know how many other routers are connected  and acting as a next-hop router for this router 
.1.3.6.1.4.1.11.2.14.11.5.1.16,HP-ICF-OID::hpSwitchAuthenticationMIB,,,,,,
.1.3.6.1.4.1.11.2.14.11.5.1.16.0,HP-AUTH-MIB::hpSwitchAuthNotifications,,,,,,
.1.3.6.1.4.1.11.2.14.11.5.1.16.0.1,HP-AUTH-MIB::hpSwitchPasswordExpiryNotify,,,,,,An hpSwitchPasswordExpiryNotify notification that signifies that  the password configured for the specified user has expired.
.1.3.6.1.4.1.11.2.14.11.5.1.16.1,HP-AUTH-MIB::hpSwitchAuthenticationConfig,,,,,,
.1.3.6.1.4.1.11.2.14.11.5.1.16.1.1,HP-AUTH-MIB::hpSwitchNumLoginAttempts,Integer32,read-write,,current,,The number of login attempts allowed, both per session and within the time of hpSwitchAuthLockoutDelay.
.1.3.6.1.4.1.11.2.14.11.5.1.16.1.2,HP-AUTH-MIB::hpSwitchAuthRespectPriv,INTEGER,read-write,,current,disabled(1):enabled(2),This object allows the switch to set privilege level of the session based on the received configuration variable from the authentication server. For RADIUS, the Service-Type attribute's configured value on the server should be 6-Administrative for manager's privilege level, or 7-NAS-prompt for the user/operator privilege level.
.1.3.6.1.4.1.11.2.14.11.5.1.16.1.3,HP-AUTH-MIB::hpSwitchAuthenticationEncryptCredentialsMethod,INTEGER,read-write,,current,none(0):aes256cbc(1),This object determines the methods used to encrypt passwords configured on this device.
.1.3.6.1.4.1.11.2.14.11.5.1.16.1.4,HP-AUTH-MIB::hpSwitchAuthLockoutDelay,Integer32,read-write,,current,,The number of seconds after repeated login failures before a user may again attempt login, and the period within which login rate is limited. When the value is set 0, the login rate limit feature is disabled.
.1.3.6.1.4.1.11.2.14.11.5.1.16.1.5,HP-AUTH-MIB::hpSwitchMinimumPasswordLength,Integer32,read-write,,current,,Minimum number of permissible characters required to set a new password for manager, operator, or local management privilege user. The exact range of valid values for this object is implementation dependent; consult the product documentation to determine the supported range for a specific product.
.1.3.6.1.4.1.11.2.14.11.5.1.16.1.6,HP-AUTH-MIB::hpSwitchAuthAllowVlanTagged,INTEGER,read-write,,current,true(1):false(2),When set to 'true', tagged VLAN membership changes
.1.3.6.1.4.1.11.2.14.11.5.1.16.1.7,HP-AUTH-MIB::hpSwitchAuthenHideSensitiveData,INTEGER,read-write,,current,enable(1):disable(2),This object enables/disables hiding of the sensitive data in standard secure-mode.
.1.3.6.1.4.1.11.2.14.11.5.1.16.1.8,HP-AUTH-MIB::hpSwitchAuthUnlockUser,OCTET,read-write,,current,,The User Name, in ASCII format. The exact size of this object is implementation dependent; the user will be unlocked, if the current state of the user is locked  out.
.1.3.6.1.4.1.11.2.14.11.5.1.16.1.9,HP-AUTH-MIB::hpSwitchAuthUserBasedLockout,INTEGER,read-write,,current,enable(1):disable(2),This object enables/disables the user-based-lockout. If this feature is enabled, the lockout is based on username and not based on the IP address.
.1.3.6.1.4.1.11.2.14.11.5.1.16.1.10,HP-AUTH-MIB::hpSwitchAuthConsoleLockout,INTEGER,read-write,,current,enable(1):disable(2),This object enables/disables the console-based-lockout feature. With this, we can have username based lockout for console.
.1.3.6.1.4.1.11.2.14.11.5.1.16.2,HP-AUTH-MIB::hpSwitchAuthenTable,,not-accessible,,current,,This table lists the authentication methods to be tried for granting different access levels through various access tasks.
.1.3.6.1.4.1.11.2.14.11.5.1.16.2.1,HP-AUTH-MIB::hpSwitchAuthenEntry,,not-accessible,hpSwitchAuthenIndex,current,,An Authentication Method Table Entry.
.1.3.6.1.4.1.11.2.14.11.5.1.16.2.1.1,HP-AUTH-MIB::hpSwitchAuthenIndex,INTEGER,not-accessible,,current,console(1):telnet(2):ieee8021X(3):webui(4):ssh(5):webauth(6):macauth(7):snmp(8):localMacAuth(9):rest(10),Signifies the access task for which authentication methods are listed in this entry.
.1.3.6.1.4.1.11.2.14.11.5.1.16.2.1.2,HP-AUTH-MIB::hpSwitchAuthenLoginPrimary,INTEGER,read-write,,current,local(1):tacacs(2):radius(3):radiusEap(4):radiusChap(5):sshRsa(6):radiusPeapMSChapv2(7):x509Certificate(8):twoFactor(9):radiusPap(10),The value of this object indicates the primary login  authentication mechanism. When a user logs in, the  authentication method configured by this object will  be tried first.
.1.3.6.1.4.1.11.2.14.11.5.1.16.2.1.3,HP-AUTH-MIB::hpSwitchAuthenLoginSecondary,INTEGER,read-write,,current,local(1):none(2):authorized(3):cachedReauth(4),The value of this object indicates the secondary  login authentication mechanism, i.e whether Local or Authorized will be tried in case the primary  authentication results in an error.The Local authentication  method uses the credential database on the switch.  The Authorized authentication method will be granted access  without authenticating. The cachedReauth authentication method  will grant access in case of reauthentication retaining the  current session attributes.
.1.3.6.1.4.1.11.2.14.11.5.1.16.2.1.4,HP-AUTH-MIB::hpSwitchAuthenEnablePrimary,INTEGER,read-write,,current,local(1):tacacs(2):radius(3):sshPubkey(6):radiusPeapMSChapv2(7):x509Certificate(8):twoFactor(9):radiusPap(10),This object configures the primary authentication mechanism that will be tried first when a user requests manager-level access
.1.3.6.1.4.1.11.2.14.11.5.1.16.2.1.5,HP-AUTH-MIB::hpSwitchAuthenEnableSecondary,INTEGER,read-write,,current,local(1):none(2):authorized(3),This object indicates the secondary login authentication mechanism, i.e whether Local or Authorized will be tried in case the primary authentication results in an error. The authentication method Local uses the credential database on the switch. The Authorized authentication method will be granted access without authenticating.
.1.3.6.1.4.1.11.2.14.11.5.1.16.2.1.6,HP-AUTH-MIB::hpSwitchAuthenLoginServerGroupName,OCTET,read-write,,current,,The name that defines the RADIUS server group that this authentication method is associated with. The current maximum length is 12.
.1.3.6.1.4.1.11.2.14.11.5.1.16.2.1.7,HP-AUTH-MIB::hpSwitchAuthenEnableServerGroupName,OCTET,read-write,,current,,The name that defines the RADIUS server group that this authentication method is associated with. The current maximum length is 12.
.1.3.6.1.4.1.11.2.14.11.5.1.16.2.1.8,HP-AUTH-MIB::hpSwitchAuthenLoginTwoFactorType,INTEGER,read-write,,current,publickeypassword(1):certificatepassword(2),This object configures the type of two-factor authentication
.1.3.6.1.4.1.11.2.14.11.5.1.16.2.1.9,HP-AUTH-MIB::hpSwitchAuthenEnableTwoFactorType,INTEGER,read-write,,current,publickeypassword(1):certificatepassword(2),This object configures the type of two-factor authentication
.1.3.6.1.4.1.11.2.14.11.5.1.16.2.1.10,HP-AUTH-MIB::hpSwitchAuthenLoginSecondAuthMethod,INTEGER,read-write,,current,local(1):tacacs(2):radius(3),This object configures the password configuration for two-factor authentication
.1.3.6.1.4.1.11.2.14.11.5.1.16.2.1.11,HP-AUTH-MIB::hpSwitchAuthenEnableSecondAuthMethod,INTEGER,read-write,,current,local(1):tacacs(2):radius(3),This object configures the password configuration for two-factor authentication
.1.3.6.1.4.1.11.2.14.11.5.1.16.2.1.12,HP-AUTH-MIB::hpSwitchAuthenClientPrimary,INTEGER,read-write,,current,x509Certificate(1):none(2),This object configures the primary authentication  for SSH when the switch acts as a client.
.1.3.6.1.4.1.11.2.14.11.5.1.16.2.1.13,HP-AUTH-MIB::hpSwitchAuthenClientSecondary,INTEGER,read-write,,current,none(1),This object indicates the secondary login authentication for SSH when the switch acts as a client. This is a placeholder as secondary authentication is not currently supported when primary authentication is 'certificate' for SSH client.
.1.3.6.1.4.1.11.2.14.11.5.1.16.2.1.14,HP-AUTH-MIB::hpSwitchAuthenCachedReauthAuthorized,INTEGER,read-write,,current,true(1):false(2),When the value of object hpSwitchAuthenLoginSecondary  is set to cachedReauth(4),the ture value set for this 
.1.3.6.1.4.1.11.2.14.11.5.1.16.3,HP-AUTH-MIB::hpSwitchTacacsConfig,,,,,,
.1.3.6.1.4.1.11.2.14.11.5.1.16.3.1,HP-AUTH-MIB::hpSwitchTacacsTimeout,Integer32,read-write,,current,,The duration in seconds to wait for a response from  the TACACS+ server host.
.1.3.6.1.4.1.11.2.14.11.5.1.16.3.2,HP-AUTH-MIB::hpSwitchTacacsAuthKey,OCTET,read-write,,current,,The key used in encrypting the packets passed between the TACACS+ server and the client. This key must match the one configured on the server.
.1.3.6.1.4.1.11.2.14.11.5.1.16.3.3,HP-AUTH-MIB::hpSwitchTacacsAuthKeyEncrypted,OCTET,read-write,,current,,An encrypted form of the key used in encrypting the packets passed between the TACACS+ server and the client. This key must match the one configured on the server. This object may only be read or written when hpSwitchAuthenticationEncryptCredentialsMethod is set to a value other than none(0). At most one of hpSwitchTacacsAuthKey and hpSwitchTacacsAuthKeyEncrypted may be set in any transaction. This object should only be written with an encrypted key previously read from a compatible HP Networking device.
.1.3.6.1.4.1.11.2.14.11.5.1.16.3.4,HP-AUTH-MIB::hpSwitchTacacsDeadTime,Integer32,read-write,,current,,This object specifies the TACACS+ server unavailability time. When a response is not received from a TACACS+ server, that  server is then not contacted for Authentication, Authorization,  or Accounting (AAA) requests for a period of dead-time defined.  During this period, any AAA request received from the client is  sent to the next available server. A value of zero indicates  that all AAA requests are continuously sent to the unavailable server.
.1.3.6.1.4.1.11.2.14.11.5.1.16.3.5,HP-AUTH-MIB::hpSwitchTacacsOrderingSequence,INTEGER,read-write,,current,true(1):false(2),When this object is set to true, reordering of TACACS+ servers  takes place upon deletion of an existing server, such that further addition of a new TACACS+ server will take place at a lower  priority than the pre-existing servers.
.1.3.6.1.4.1.11.2.14.11.5.1.16.4,HP-AUTH-MIB::hpSwitchTacacsServersTable,,not-accessible,,current,,This table lists a maximum of 3 TACACS+ servers.
.1.3.6.1.4.1.11.2.14.11.5.1.16.4.1,HP-AUTH-MIB::hpSwitchTacacsServersEntry,,not-accessible,hpSwitchTacacsServerIndex,current,,A TACACS+ server table entry.
.1.3.6.1.4.1.11.2.14.11.5.1.16.4.1.1,HP-AUTH-MIB::hpSwitchTacacsServerIndex,Integer32,not-accessible,,current,,The index value which uniquely identifies a row in the TACACS+ Servers Table.
.1.3.6.1.4.1.11.2.14.11.5.1.16.4.1.2,HP-AUTH-MIB::hpSwitchTacacsServerIpAddr,IpAddress,read-create,,current,,The IP address of a TACACS+ Server.
.1.3.6.1.4.1.11.2.14.11.5.1.16.4.1.3,HP-AUTH-MIB::hpSwitchTacacsServerKey,OCTET,read-create,,current,,The key used in encrypting the packets passed between the TACACS+ server and the client. This key must match the one configured on the server.
.1.3.6.1.4.1.11.2.14.11.5.1.16.4.1.4,HP-AUTH-MIB::hpSwitchTacacsServerStatus,INTEGER,read-create,,current,active(1):notInService(2):notReady(3):createAndGo(4):createAndWait(5):destroy(6),Status of Servers Table row.
.1.3.6.1.4.1.11.2.14.11.5.1.16.4.1.5,HP-AUTH-MIB::hpSwitchTacacsServerIsOobm,INTEGER,read-create,,current,true(1):false(2),This object indicates whether this TACACS+ Server is reachable over OOBM (Out Of Band Management)  interface or not. This mib object will be applicable only if there is a physical OOBM port on the device.
.1.3.6.1.4.1.11.2.14.11.5.1.16.4.1.6,HP-AUTH-MIB::hpSwitchTacacsServerKeyEncrypted,OCTET,read-create,,current,,An encrypted form of the key used in encrypting the packets passed between the TACACS+ server and the client. This key must match the one configured on the server. This object may only be read or written when hpSwitchAuthenticationEncryptCredentialsMethod is set to a value other than none(0). At most one of hpSwitchTacacsServerKey and hpSwitchTacacsServerKeyEncrypted may be set in any transaction. This object should only be written with an encrypted key previously read from a compatible HP Networking device.
.1.3.6.1.4.1.11.2.14.11.5.1.16.4.1.7,HP-AUTH-MIB::hpSwitchTacacsServerAddressType,INTEGER,read-create,,current,unknown(0):ipv4(1):ipv6(2):ipv4z(3):ipv6z(4):dns(16),Type of TACACS+ Server IP Address stored in hpSwitchTacacsServerAddress.
.1.3.6.1.4.1.11.2.14.11.5.1.16.4.1.8,HP-AUTH-MIB::hpSwitchTacacsServerAddress,OCTET,read-create,,current,,The IPv4 or IPv6 Address of the TACACS+ server.
.1.3.6.1.4.1.11.2.14.11.5.1.16.5,HP-AUTH-MIB::hpTacacsStatsServersTable,,not-accessible,,current,,A table containing statistics for the configured TACACS+ servers.
.1.3.6.1.4.1.11.2.14.11.5.1.16.5.1,HP-AUTH-MIB::hpTacacsStatsServersEntry,,not-accessible,hpTacacsStatsServerIndex,current,,The information associated with each row in the TACACS+ servers table.
.1.3.6.1.4.1.11.2.14.11.5.1.16.5.1.1,HP-AUTH-MIB::hpTacacsStatsServerIndex,Integer32,not-accessible,,current,,The index identifying the row in the table.
.1.3.6.1.4.1.11.2.14.11.5.1.16.5.1.2,HP-AUTH-MIB::hpTacacsStatsTacacsServerIpAddr,IpAddress,read-only,,current,,The IP address of a TACACS+ Server.
.1.3.6.1.4.1.11.2.14.11.5.1.16.5.1.3,HP-AUTH-MIB::hpTacacsStatsNumSessOpened,Counter32,read-only,,current,,The number of authentication, authorization and accounting sessions opened with the server.
.1.3.6.1.4.1.11.2.14.11.5.1.16.5.1.4,HP-AUTH-MIB::hpTacacsStatsNumSessClosed,Counter32,read-only,,current,,The number of authentication, authorization and accounting sessions closed with the server.
.1.3.6.1.4.1.11.2.14.11.5.1.16.5.1.5,HP-AUTH-MIB::hpTacacsStatsNumSessAborted,Counter32,read-only,,current,,The number of authentication, authorization and accounting sessions aborted with the server.
.1.3.6.1.4.1.11.2.14.11.5.1.16.5.1.6,HP-AUTH-MIB::hpTacacsStatsNumSessErrors,Counter32,read-only,,current,,The number of authentication, authorization and accounting sessions with this server resulted in  an error.
.1.3.6.1.4.1.11.2.14.11.5.1.16.5.1.7,HP-AUTH-MIB::hpTacacsStatsNumPktsIn,Counter32,read-only,,current,,The number of responses received from the server.
.1.3.6.1.4.1.11.2.14.11.5.1.16.5.1.8,HP-AUTH-MIB::hpTacacsStatsNumPktsOut,Counter32,read-only,,current,,The number of requests sent to the server.
.1.3.6.1.4.1.11.2.14.11.5.1.16.5.1.9,HP-AUTH-MIB::hpTacacsStatsNumAuthPktsIn,Counter32,read-only,,current,,The number of authentication responses received from the server.
.1.3.6.1.4.1.11.2.14.11.5.1.16.5.1.10,HP-AUTH-MIB::hpTacacsStatsNumAuthPktsOut,Counter32,read-only,,current,,The number of authentication requests sent to the server.
.1.3.6.1.4.1.11.2.14.11.5.1.16.5.1.11,HP-AUTH-MIB::hpTacacsStatsNumAuthPktsTimedOut,Counter32,read-only,,current,,The number of authentication requests that timed out due to no response from the server.
.1.3.6.1.4.1.11.2.14.11.5.1.16.5.1.12,HP-AUTH-MIB::hpTacacsStatsNumAutzPktsIn,Counter32,read-only,,current,,The number of authorization responses received from the server.
.1.3.6.1.4.1.11.2.14.11.5.1.16.5.1.13,HP-AUTH-MIB::hpTacacsStatsNumAutzPktsOut,Counter32,read-only,,current,,The number of authorization requests sent to the server.
.1.3.6.1.4.1.11.2.14.11.5.1.16.5.1.14,HP-AUTH-MIB::hpTacacsStatsNumAutzPktsTimedOut,Counter32,read-only,,current,,The number of authorization requests that timed out due to no response from the server.
.1.3.6.1.4.1.11.2.14.11.5.1.16.5.1.15,HP-AUTH-MIB::hpTacacsStatsNumAcctPktsIn,Counter32,read-only,,current,,The number of accounting responses received from the server.
.1.3.6.1.4.1.11.2.14.11.5.1.16.5.1.16,HP-AUTH-MIB::hpTacacsStatsNumAcctPktsOut,Counter32,read-only,,current,,The number of accounting requests sent to the server.
.1.3.6.1.4.1.11.2.14.11.5.1.16.5.1.17,HP-AUTH-MIB::hpTacacsStatsNumAcctPktsTimedOut,Counter32,read-only,,current,,The number of accounting requests that timed out due to no response from the server.
.1.3.6.1.4.1.11.2.14.11.5.1.16.5.1.18,HP-AUTH-MIB::hpTacacsStatsTacacsServerAdrType,INTEGER,read-only,,current,unknown(0):ipv4(1):ipv6(2):ipv4z(3):ipv6z(4):dns(16),Type of TACACS+ Server IP Address stored in hpTacacsStatsTacacsServerAddr.
.1.3.6.1.4.1.11.2.14.11.5.1.16.5.1.19,HP-AUTH-MIB::hpTacacsStatsTacacsServerAddr,OCTET,read-only,,current,,The IPv4 or IPv6 Address of the TACACS+ server.
.1.3.6.1.4.1.11.2.14.11.5.1.16.6,HP-AUTH-MIB::hpSwitchRadiusConfig,,,,,,
.1.3.6.1.4.1.11.2.14.11.5.1.16.6.1,HP-AUTH-MIB::hpSwitchRadiusDeadTime,Integer32,read-write,,current,,The length of time in minutes a RADIUS server is skipped over by transaction requests (from 0 up to 24 hours).  Used to improve RADIUS response times when some servers might be unavailable.
.1.3.6.1.4.1.11.2.14.11.5.1.16.6.2,HP-AUTH-MIB::hpSwitchRadiusTimeout,Integer32,read-write,,current,,The duration in seconds to wait for a response from  the RADIUS server host.
.1.3.6.1.4.1.11.2.14.11.5.1.16.6.3,HP-AUTH-MIB::hpSwitchRadiusRetransmitAttempts,Integer32,read-write,,current,,Maximum number of retransmission attempts.
.1.3.6.1.4.1.11.2.14.11.5.1.16.6.4,HP-AUTH-MIB::hpSwitchRadiusAuthKey,OCTET,read-write,,current,,The key used in encrypting the packets passed between the RADIUS server and the client. This key must match the one configured on the server.
.1.3.6.1.4.1.11.2.14.11.5.1.16.6.5,HP-AUTH-MIB::hpSwitchRadiusDynAutzPortNumber,Integer32,read-write,,current,,The UDP port number to listen for Disconnect and  Change-of-Authorization messages.
.1.3.6.1.4.1.11.2.14.11.5.1.16.6.6,HP-AUTH-MIB::hpSwitchRadiusAuthKeyEncrypted,OCTET,read-write,,current,,An encrypted form of the key used in encrypting the packets passed between the RADIUS server and the client. This key must match the one configured on the server. This object may only be read or written when hpSwitchAuthenticationEncryptCredentialsMethod is set to a value other than none(0). At most one of hpSwitchRadiusAuthKey and hpSwitchRadiusAuthKeyEncrypted may be set in any transaction. This object should only be written with an encrypted key previously read from a compatible HP Networking device.
.1.3.6.1.4.1.11.2.14.11.5.1.16.6.10,HP-AUTH-MIB::hpSwitchRadiusTracking,INTEGER,read-write,,current,true(1):false(2),To enable or disable the RADIUS service tracking. If this feature is enabled, it is used to send access-request packets at regular intervals to track the availability of server.
.1.3.6.1.4.1.11.2.14.11.5.1.16.6.11,HP-AUTH-MIB::hpSwitchRadiusTrackingUserName,OCTET,read-create,,current,,This user name will be used to send Access-Request packets to  the RADIUS server to track it.
.1.3.6.1.4.1.11.2.14.11.5.1.16.6.12,HP-AUTH-MIB::hpSwitchRadiusCppmIdentity,OCTET,read-write,,current,,The cppm identity value to be used during authentication with  cppm server.
.1.3.6.1.4.1.11.2.14.11.5.1.16.6.13,HP-AUTH-MIB::hpSwitchRadiusCppmKey,OCTET,read-write,,current,,The cppm key value to be used during authentication with  cppm server.
.1.3.6.1.4.1.11.2.14.11.5.1.16.6.14,HP-AUTH-MIB::hpSwitchRadiusCppmEncryptedKey,OCTET,read-write,,current,,The encrypted cppm key value to be used during authentication  with cppm server.The key value used to set this object should  be read from a compatible HPE netwokring device only.
.1.3.6.1.4.1.11.2.14.11.5.1.16.6.15,HP-AUTH-MIB::hpSwitchRadiusDeadTimeInfinite,INTEGER,read-write,,current,true(1):false(2),If this is set to true, a dead RADIUS server is skipped over by transaction requests until the RADIUS server is tracked up and alive by RADIUS tracking. The default value is set to FLASE.
.1.3.6.1.4.1.11.2.14.11.5.1.16.6.16,HP-AUTH-MIB::hpSwitchRadiusTrackingInterval,Integer32,read-write,,current,,The regular time interval in seconds at which RADIUS access-request packets are sent to track the availability of RADIUS server. The default time interval is 5 minutes.
.1.3.6.1.4.1.11.2.14.11.5.1.16.6.17,HP-AUTH-MIB::hpSwitchRadiusTrackingPassword,OCTET,read-write,,current,,This password will be used in Access-Request packets sent to the RADIUS server to track it.
.1.3.6.1.4.1.11.2.14.11.5.1.16.6.18,HP-AUTH-MIB::hpSwitchRadiusTrackDeadOnly,INTEGER,read-write,,current,true(1):false(2),If this is set to true, RADIUS tracking packets are sent only to dead servers.
.1.3.6.1.4.1.11.2.14.11.5.1.16.6.19,HP-AUTH-MIB::hpSwitchRadiusTrackReqPktCount,Integer32,read-write,,current,,Number of Access Request Packet to be sent for tracking.
.1.3.6.1.4.1.11.2.14.11.5.1.16.6.20,HP-AUTH-MIB::hpSwitchRadiusTrackPassEncrypt,OCTET,read-write,,current,,The password is configured in the encrypted form. The password after decryption is sent in Access-Request packet to the RADIUS server for tracking. This object can be read or written only when hpSwitchAuthenticationEncryptCredentialsMethod is set to a value other than none(0). At most one of the hpSwitchRadiusTrackingPassword and hpSwitchRadiusTrackPassEncrypt can be set in any transaction. This object should only be written with an encrypted password string previously read from a compatible Networking device.
.1.3.6.1.4.1.11.2.14.11.5.1.16.6.21,HP-AUTH-MIB::hpSwitchRadiusFramedIpv4Address,INTEGER,read-write,,current,true(1):false(2),If this is set to true, framedIpv4Address attribute will be added to the access-request packet. The default value is set to FLASE.
.1.3.6.1.4.1.11.2.14.11.5.1.16.6.22,HP-AUTH-MIB::hpSwitchRadiusFqdnRetry,Integer32,read-write,,current,,The interval at which the resolution of the FQDN is retried for the radius server  which failed to resolve the FQDN at the time of configuring it. Retry interval is  0-5 minutes. When 0 is set, the FQDN resolution will not be retried. The default value is 3 minutes.
.1.3.6.1.4.1.11.2.14.11.5.1.16.6.24,HP-AUTH-MIB::hpSwitchRadiusTLSTimeout,Integer32,read-write,,current,,The duration in seconds to wait for a response from  the RADIUS TLS server host.
.1.3.6.1.4.1.11.2.14.11.5.1.16.6.25,HP-AUTH-MIB::hpSwitchRadiusTLSConnectionTimeout,Integer32,read-write,,current,,The duration in seconds to wait for a response from  the server during TLS session establishment.
.1.3.6.1.4.1.11.2.14.11.5.1.16.6.26,HP-AUTH-MIB::hpSwitchRadiusTLSDeadTime,Integer32,read-write,,current,,The length of time in minutes a RADIUS TLS server is skipped over by transaction requests (from 0 up to 24 hours).  Used to improve RADIUS response times when some servers might be unavailable.
.1.3.6.1.4.1.11.2.14.11.5.1.16.6.27,HP-AUTH-MIB::hpSwitchRadiusTLSDeadTimeInfinite,INTEGER,read-write,,current,true(1):false(2),If this is set to true, a dead RADIUS TLS server  is skipped over by transaction requests until the  RADIUS TLS server is tracked up and alive by  RADIUS tracking. The default value is set to FALSE.
.1.3.6.1.4.1.11.2.14.11.5.1.16.7,HP-AUTH-MIB::hpSwitchRadiusServerTable,,not-accessible,,current,,This table lists a maximum of 3 RADIUS servers.
.1.3.6.1.4.1.11.2.14.11.5.1.16.7.1,HP-AUTH-MIB::hpSwitchRadiusServerEntry,,not-accessible,hpSwitchRadiusServerIndex,current,,A RADIUS server table entry.
.1.3.6.1.4.1.11.2.14.11.5.1.16.7.1.1,HP-AUTH-MIB::hpSwitchRadiusServerIndex,Integer32,not-accessible,,current,,The index value which uniquely identifies a row in the RADIUS Servers Table.
.1.3.6.1.4.1.11.2.14.11.5.1.16.7.1.2,HP-AUTH-MIB::hpSwitchRadiusServerIpAddr,IpAddress,read-create,,deprecated,,The IP address of a RADIUS Server. When the RADIUS server  has been configured with IPv6 address, the value of  this object will be set to Null.
.1.3.6.1.4.1.11.2.14.11.5.1.16.7.1.3,HP-AUTH-MIB::hpSwitchRadiusServerKey,OCTET,read-create,,current,,The key used in encrypting the packets passed between the RADIUS server and the client. This key must match the one configured on the server.
.1.3.6.1.4.1.11.2.14.11.5.1.16.7.1.4,HP-AUTH-MIB::hpSwitchRadiusServerAuthPortNumber,Integer32,read-create,,current,,The UDP destination port number to use for sending authentication requests to this RADIUS Server.
.1.3.6.1.4.1.11.2.14.11.5.1.16.7.1.5,HP-AUTH-MIB::hpSwitchRadiusServerAcctPortNumber,Integer32,read-create,,current,,The UDP destination port number to use for sending accounting requests to this RADIUS server.
.1.3.6.1.4.1.11.2.14.11.5.1.16.7.1.6,HP-AUTH-MIB::hpSwitchRadiusServerDynAutzEnabled,INTEGER,read-create,,current,true(1):false(2),This object indicates whether Dynamic Authorization messages (Disconnect-Requests and CoA-Requests) are authorized for processing from this RADIUS Server.
.1.3.6.1.4.1.11.2.14.11.5.1.16.7.1.7,HP-AUTH-MIB::hpSwitchRadiusServerDynAutzTimeWindow,Integer32,read-create,,current,,A non-zero value indicates that the Event-Timestamp attribute must be used in the dynamic authorization communication exchange between the NAS and the RADIUS server. Such a value determines the time window (in seconds) within which RADIUS packets carrying the  Event-Timestamp attribute will be considered as current and accepted for processing by the NAS and the RADIUS  Server. Zero value disables checking for the  Event-Timestamp attribute. The default time window  is 300 seconds.
.1.3.6.1.4.1.11.2.14.11.5.1.16.7.1.8,HP-AUTH-MIB::hpSwitchRadiusServerStatus,INTEGER,read-create,,current,active(1):notInService(2):notReady(3):createAndGo(4):createAndWait(5):destroy(6),Status of Servers Table row.
.1.3.6.1.4.1.11.2.14.11.5.1.16.7.1.9,HP-AUTH-MIB::hpSwitchRadiusServerIsOobm,INTEGER,read-create,,current,true(1):false(2),This object indicates whether this RADIUS Server is reachable over OOBM (Out Of Band Management)  interface or not. This mib object will be applicable only if there is a physical OOBM port on the device.
.1.3.6.1.4.1.11.2.14.11.5.1.16.7.1.10,HP-AUTH-MIB::hpSwitchRadiusServerKeyEncrypted,OCTET,read-create,,current,,An encrypted form of the key used in encrypting the packets passed between the RADIUS server and the client. This key must match the one configured on the server. This object may only be read or written when hpSwitchAuthenticationEncryptCredentialsMethod is set to a value other than none(0). At most one of hpSwitchRadiusServerKey and hpSwitchRadiusServerKeyEncrypted may be set in any transaction. This object should only be written with an encrypted key previously read from a compatible HP Networking device.
.1.3.6.1.4.1.11.2.14.11.5.1.16.7.1.11,HP-AUTH-MIB::hpSwitchRadiusServerAddrType,INTEGER,read-create,,current,unknown(0):ipv4(1):ipv6(2):ipv4z(3):ipv6z(4):dns(16),Type of RADIUS Server IP Address stored in hpSwitchRadiusServerAddress.
.1.3.6.1.4.1.11.2.14.11.5.1.16.7.1.12,HP-AUTH-MIB::hpSwitchRadiusServerAddress,OCTET,read-create,,current,,The IPv4 or IPv6 Address of the RADIUS server.
.1.3.6.1.4.1.11.2.14.11.5.1.16.7.1.13,HP-AUTH-MIB::hpSwitchRadiusServerDynAutzTimeWindowType,INTEGER,read-create,,current,positive(0):plusorminus(1),Window type indicates the acceptable window size for dynamic authorization messages. Positive window type will allow messages when time difference between sender Event-TimeStamp and receiver/switch timeStamp is between  0 to +hpSwitchRadiusServerDynAutzTimeWindow. plusorminus type will allow messages when time difference  time difference between sender Event-TimeStamp and  receiver/switch timeStamp is between  0 to +hpSwitchRadiusServerDynAutzTimeWindow.The default window type is positive.
.1.3.6.1.4.1.11.2.14.11.5.1.16.7.1.14,HP-AUTH-MIB::hpSwitchRadiusServerFqdn,OCTET,read-create,,current,,The FQDN address of RADIUS Server. When the RADIUS server  has been configured with IPv6 address of IPv4 address,  the value of this object will be set to Null.
.1.3.6.1.4.1.11.2.14.11.5.1.16.7.1.15,HP-AUTH-MIB::hpSwitchRadiusServerIsClearPass,INTEGER,read-create,,current,true(1):false(2),This object indicates whether this RADIUS Server is hosted by ClearPass or not.This mib object will be applicable only if there is a Hosted ClearPass server
.1.3.6.1.4.1.11.2.14.11.5.1.16.7.1.16,HP-AUTH-MIB::hpSwitchRadiusTLSEnable,INTEGER,read-create,,current,true(1):false(2),This object enables the RADSEC protocol and encrypts the RADIUS messages using TLS by establishing a TCP connection with the RADIUS server. By default, it is not enabled.
.1.3.6.1.4.1.11.2.14.11.5.1.16.7.1.17,HP-AUTH-MIB::hpSwitchRadiusTLSPort,Integer32,read-create,,current,,The destination TCP port number to use for establishing a connection with RADIUS TLS server. The default value is 2083.
.1.3.6.1.4.1.11.2.14.11.5.1.16.7.1.18,HP-AUTH-MIB::hpSwitchRadiusTLSRetryTimer,Integer32,read-only,,current,,The number of minutes after which the RADIUS Server TLS connection will be re-established.
.1.3.6.1.4.1.11.2.14.11.5.1.16.11,HP-AUTH-MIB::hpSwitchAuthenticationMIBConformance,,,,,,
.1.3.6.1.4.1.11.2.14.11.5.1.16.11.1,HP-AUTH-MIB::hpSwitchAuthenticationMIBCompliances,,,,,,
.1.3.6.1.4.1.11.2.14.11.5.1.16.11.1.1,HP-AUTH-MIB::hpSwitchAuthenticationMIBCompliance,,,,,,The compliance statement for devices implementing the HP Authentication Mib.
.1.3.6.1.4.1.11.2.14.11.5.1.16.11.1.2,HP-AUTH-MIB::hpSwitchAuthenticationMIBCompliance1,,,,,,The compliance statement for devices implementing the HP Authentication Mib.
.1.3.6.1.4.1.11.2.14.11.5.1.16.11.1.3,HP-AUTH-MIB::hpSwitchAuthenticationMIBCompliance2,,,,,,The compliance statement for devices implementing the HP Authentication Mib.
.1.3.6.1.4.1.11.2.14.11.5.1.16.11.1.4,HP-AUTH-MIB::hpSwitchAuthenticationMIBComplianceOobm,,,,,,The compliance statement for devices implementing the HP Authentication Mib with OOBM support
.1.3.6.1.4.1.11.2.14.11.5.1.16.11.1.5,HP-AUTH-MIB::hpSwitchUserConfigMIBCompliance,,,,,,The compliance statement for configuring user-name/password for operator/manager/port-access.
.1.3.6.1.4.1.11.2.14.11.5.1.16.11.1.6,HP-AUTH-MIB::hpSwitchAAAServerMIBCompliance,,,,,,The compliance statement for configuring RADIUS server groups.
.1.3.6.1.4.1.11.2.14.11.5.1.16.11.1.7,HP-AUTH-MIB::hpSwitchAuthenMIBCompliance,,,,,,The compliance statement for listing the authentication methods to be tried for granting different access levels through various access tasks
.1.3.6.1.4.1.11.2.14.11.5.1.16.11.1.8,HP-AUTH-MIB::hpSwitchLocalMgmtPrivUserMIBCompliance,,,,,,The compliance statement for listing the local management privilege methods to be tried for granting different access levels through various access tasks
.1.3.6.1.4.1.11.2.14.11.5.1.16.11.1.9,HP-AUTH-MIB::hpSwitchAuthenticationMIBCompliance3,,,,,,The compliance statement for devices implementing the HP Authentication Mib.
.1.3.6.1.4.1.11.2.14.11.5.1.16.11.1.10,HP-AUTH-MIB::hpSwitchUserConfigMIBCompliance1,,,,,,The compliance statement for configuring user-name/password for operator/manager/port-access.
.1.3.6.1.4.1.11.2.14.11.5.1.16.11.1.11,HP-AUTH-MIB::hpSwitchLocalMgmtPrivUserMIBCompliance1,,,,,,The compliance statement for configuring user-name/password for operator/manager/port-access.
.1.3.6.1.4.1.11.2.14.11.5.1.16.11.1.12,HP-AUTH-MIB::hpSwitchAuthenticationMIBCompliance4,,,,,,The compliance statement for devices implementing the HP Authentication MIB.
.1.3.6.1.4.1.11.2.14.11.5.1.16.11.1.13,HP-AUTH-MIB::hpSwitchAuthenticationMIBCompliance5,,,,,,The compliance statement for devices implementing the HP Authentication Mib.
.1.3.6.1.4.1.11.2.14.11.5.1.16.11.1.14,HP-AUTH-MIB::hpSwitchAuthenticationMIBComplianceOobm1,,,,,,The compliance statement for devices implementing the HP Authentication Mib with OOBM support
.1.3.6.1.4.1.11.2.14.11.5.1.16.11.1.15,HP-AUTH-MIB::hpSwitchAuthenticationMIBCompliance6,,,,,,The compliance statement for devices implementing the HP Authentication Mib.
.1.3.6.1.4.1.11.2.14.11.5.1.16.11.1.16,HP-AUTH-MIB::hpSwitchAuthenticationMIBCompliance7,,,,,,The compliance statement for devices implementing the HP Authentication Mib.
.1.3.6.1.4.1.11.2.14.11.5.1.16.11.1.17,HP-AUTH-MIB::hpSwitchAuthenticationMIBCompliance8,,,,,,The compliance statement for devices implementing the HP Authentication Mib.
.1.3.6.1.4.1.11.2.14.11.5.1.16.11.1.18,HP-AUTH-MIB::hpSwitchAuthenticationMIBCompliance9,,,,,,The compliance statement for devices implementing the HP Authentication Mib.
.1.3.6.1.4.1.11.2.14.11.5.1.16.11.1.19,HP-AUTH-MIB::hpSwitchAuthenticationMIBCompliance10,,,,,,The compliance statement for devices implementing the HP password Authentication MIB.
.1.3.6.1.4.1.11.2.14.11.5.1.16.11.1.20,HP-AUTH-MIB::hpSwitchLocalMgmtPrivUserMIBCompliance2,,,,,,The compliance statement for listing the local management privilege methods to be tried for granting different access levels through various access tasks
.1.3.6.1.4.1.11.2.14.11.5.1.16.11.1.21,HP-AUTH-MIB::hpSwitchUserConfigMIBCompliance2,,,,,,The compliance statement for configuring user-name/password for operator/manager/port-access.
.1.3.6.1.4.1.11.2.14.11.5.1.16.11.1.22,HP-AUTH-MIB::hpSwitchAuthenticationMIBCompliance11,,,,,,The compliance statement for devices implementing the HP Authentication Mib.
.1.3.6.1.4.1.11.2.14.11.5.1.16.11.1.23,HP-AUTH-MIB::hpSwitchAuthenticationMIBCompliance12,,,,,,The compliance statement for devices implementing the HP Authentication Mib.
.1.3.6.1.4.1.11.2.14.11.5.1.16.11.1.24,HP-AUTH-MIB::hpSwitchUserConfigMIBCompliance3,,,,,,The compliance statement for configuring username and password for operator, manager or port-access.
.1.3.6.1.4.1.11.2.14.11.5.1.16.11.1.25,HP-AUTH-MIB::hpSwitchLocalMgmtPrivUserMIBCompliance3,,,,,,The compliance statement for listing the local management privilege methods to be tried for granting different access levels through various access tasks
.1.3.6.1.4.1.11.2.14.11.5.1.16.11.1.26,HP-AUTH-MIB::hpSwitchAuthenticationMIBCompliance13,,,,,,The compliance statement for devices implementing the HP Authentication Mib.
.1.3.6.1.4.1.11.2.14.11.5.1.16.11.1.27,HP-AUTH-MIB::hpSwitchAuthenticationMIBCompliance14,,,,,,The compliance statement for devices implementing the HP Authentication Mib.
.1.3.6.1.4.1.11.2.14.11.5.1.16.11.1.28,HP-AUTH-MIB::hpSwitchAuthenticationMIBCompliance15,,,,,,The compliance statement for devices implementing the HP Authentication Mib.
.1.3.6.1.4.1.11.2.14.11.5.1.16.11.1.29,HP-AUTH-MIB::hpSwitchAuthenticationMIBCompliance16,,,,,,The compliance statement for devices implementing the HP Authentication Mib.
.1.3.6.1.4.1.11.2.14.11.5.1.16.11.1.30,HP-AUTH-MIB::hpSwitchFrontPanelSecurityCompliance,,,,,,The compliance statement for configuring front panel security commands.
.1.3.6.1.4.1.11.2.14.11.5.1.16.11.1.31,HP-AUTH-MIB::hpSwitchAuthenticationMIBCompliance17,,,,,,The compliance statement for devices implementing the HP Authentication Mib.
.1.3.6.1.4.1.11.2.14.11.5.1.16.11.1.32,HP-AUTH-MIB::hpSwitchAuthenticationMIBCompliance18,,,,,,The compliance statement for devices implementing the HP Authentication Mib.
.1.3.6.1.4.1.11.2.14.11.5.1.16.11.1.33,HP-AUTH-MIB::hpSwitchAuthenticationMIBCompliance19,,,,,,The compliance statement for devices implementing the HP Authentication Mib.
.1.3.6.1.4.1.11.2.14.11.5.1.16.11.1.34,HP-AUTH-MIB::hpSwitchAuthenticationMIBComplianceOobm2,,,,,,The compliance statement for devices implementing the HP Authentication Mib with OOBM support
.1.3.6.1.4.1.11.2.14.11.5.1.16.11.1.35,HP-AUTH-MIB::hpSwitchAuthenticationMIBCompliance20,,,,,,The compliance statement for devices implementing the HP Authentication Mib.
.1.3.6.1.4.1.11.2.14.11.5.1.16.11.1.37,HP-AUTH-MIB::hpSwitchAuthenticationMIBCompliance21,,,,,,The compliance statement for devices implementing the HP Authentication Mib.
.1.3.6.1.4.1.11.2.14.11.5.1.16.11.1.38,HP-AUTH-MIB::hpSwitchAuthenticationMIBCompliance22,,,,,,The compliance statement for devices implementing the HP Authentication Mib.
.1.3.6.1.4.1.11.2.14.11.5.1.16.11.1.39,HP-AUTH-MIB::hpSwitchAuthenticationMIBCompliance23,,,,,,The compliance statement for devices implementing the HP Authentication Mib.
.1.3.6.1.4.1.11.2.14.11.5.1.16.11.1.42,HP-AUTH-MIB::hpSwitchAuthenticationMIBCompliance26,,,,,,The compliance statement for devices implementing the HP Authentication Mib.
.1.3.6.1.4.1.11.2.14.11.5.1.16.11.1.43,HP-AUTH-MIB::hpSwitchAuthenticationMIBCompliance27,,,,,,The compliance statement for devices implementing the HP Authentication Mib.
.1.3.6.1.4.1.11.2.14.11.5.1.16.11.1.44,HP-AUTH-MIB::hpSwitchAAAServerMIBCompliance2,,,,,,The compliance statement for configuring RADIUS server groups.
.1.3.6.1.4.1.11.2.14.11.5.1.16.11.2,HP-AUTH-MIB::hpSwitchAuthenticationMIBGroups,,,,,,
.1.3.6.1.4.1.11.2.14.11.5.1.16.11.2.1,HP-AUTH-MIB::hpSwitchAuthenticationConfigGroup,,,,,,A collection of objects for configuring the authentication features.
.1.3.6.1.4.1.11.2.14.11.5.1.16.11.2.2,HP-AUTH-MIB::hpSwitchTacacsConfigGroup,,,,,,A collection of objects for configuring the  state of the TACACS+ protocol.
.1.3.6.1.4.1.11.2.14.11.5.1.16.11.2.3,HP-AUTH-MIB::hpSwitchTacacsStatsGroup,,,,,,A collection of objects for viewing the status information of the TACACS+ protocol.
.1.3.6.1.4.1.11.2.14.11.5.1.16.11.2.4,HP-AUTH-MIB::hpSwitchRadiusConfigGroup,,,,,,A collection of objects for configuring the  state of the RADIUS protocol.
.1.3.6.1.4.1.11.2.14.11.5.1.16.11.2.6,HP-AUTH-MIB::hpSwitchKmsGroup,,,,,,A collection of objects for configuring KMS functionality.
.1.3.6.1.4.1.11.2.14.11.5.1.16.11.2.7,HP-AUTH-MIB::hpSwitchOspfAuthGroup,,,,,,A collection of objects for configuring OSPF authentication.
.1.3.6.1.4.1.11.2.14.11.5.1.16.11.2.8,HP-AUTH-MIB::hpSwitchAuthenticationConfigGroup1,,,,,,A collection of objects for configuring the authentication features.
.1.3.6.1.4.1.11.2.14.11.5.1.16.11.2.9,HP-AUTH-MIB::hpSwitchSslGroup,,,,,,A collection of objects for configuring SSL Servers.
.1.3.6.1.4.1.11.2.14.11.5.1.16.11.2.10,HP-AUTH-MIB::hpSwitchCertGroup,,,,,,A collection of objects for configuring Certificates.
.1.3.6.1.4.1.11.2.14.11.5.1.16.11.2.11,HP-AUTH-MIB::hpSwitchCertStatusGroup,,,,,,A collection of objects for configuring Certificate Status.
.1.3.6.1.4.1.11.2.14.11.5.1.16.11.2.12,HP-AUTH-MIB::hpSwitchTacacsOobmGroup,,,,,,A collection of objects for configuring the  TACACS+ server entry with support for OOBM  (Out of Band Management) interface.
.1.3.6.1.4.1.11.2.14.11.5.1.16.11.2.13,HP-AUTH-MIB::hpSwitchRadiusOobmGroup,,,,,,A collection of objects for configuring the  RADIUS server entry with support for OOBM  (Out of Band Management) interface.
.1.3.6.1.4.1.11.2.14.11.5.1.16.11.2.14,HP-AUTH-MIB::hpSwitchCertStatusGroup2,,,,,,A collection of objects for configuring Certificate Status.
.1.3.6.1.4.1.11.2.14.11.5.1.16.11.2.15,HP-AUTH-MIB::hpSwitchUserConfigGroup,,,,,,A collection of objects for configuring user-name/password  for operator/manager/port-access.
.1.3.6.1.4.1.11.2.14.11.5.1.16.11.2.16,HP-AUTH-MIB::hpSwitchAAAServerGroup,,,,,,A collection of objects for configuring RADIUS server groups.
.1.3.6.1.4.1.11.2.14.11.5.1.16.11.2.17,HP-AUTH-MIB::hpSwitchAuthenGroup,,,,,,A collection of objects for listing the authentication methods to be tried for granting different access levels through various access tasks.
.1.3.6.1.4.1.11.2.14.11.5.1.16.11.2.18,HP-AUTH-MIB::hpSwitchAuthLocalMgmtPrivUserGroup,,,,,,A collection of objects for configuring Local Management Privilege Groups
.1.3.6.1.4.1.11.2.14.11.5.1.16.11.2.19,HP-AUTH-MIB::hpSwitchTacacsConfigGroup1,,,,,,A collection of objects for configuring the state of the TACACS+ protocol.
.1.3.6.1.4.1.11.2.14.11.5.1.16.11.2.20,HP-AUTH-MIB::hpSwitchRadiusConfigGroup1,,,,,,A collection of objects for configuring the  state of the RADIUS protocol.
.1.3.6.1.4.1.11.2.14.11.5.1.16.11.2.21,HP-AUTH-MIB::hpSwitchKmsGroup1,,,,,,A collection of objects for configuring KMS functionality.
.1.3.6.1.4.1.11.2.14.11.5.1.16.11.2.22,HP-AUTH-MIB::hpSwitchUserConfigGroup1,,,,,,A collection of objects for configuring user-name/password  for operator/manager/port-access.
.1.3.6.1.4.1.11.2.14.11.5.1.16.11.2.23,HP-AUTH-MIB::hpSwitchAuthLocalMgmtPrivUserGroup1,,,,,,Row Status of objects for configuring Local Management Privilege Groups
.1.3.6.1.4.1.11.2.14.11.5.1.16.11.2.24,HP-AUTH-MIB::hpSwitchCertStatusGroup3,,,,,,A collection of objects for configuring  Certificate Keys.
.1.3.6.1.4.1.11.2.14.11.5.1.16.11.2.25,HP-AUTH-MIB::hpSwitchAuthenticationConfigGroup2,,,,,,A collection of objects for configuring the authentication features.
.1.3.6.1.4.1.11.2.14.11.5.1.16.11.2.26,HP-AUTH-MIB::hpSwitchRadiusConfigGroup2,,,,,,A collection of objects for configuring the state of the RADIUS protocol.
.1.3.6.1.4.1.11.2.14.11.5.1.16.11.2.27,HP-AUTH-MIB::hpSwitchAuthenticationConfigGroup3,,,,,,A collection of objects for configuring the authentication features.
.1.3.6.1.4.1.11.2.14.11.5.1.16.11.2.28,HP-AUTH-MIB::hpSwitchAuthenticationConfigGroup4,,,,,,A collection of objects which controls bypassing of the  username during authentication to get Operator or Manager access.
.1.3.6.1.4.1.11.2.14.11.5.1.16.11.2.29,HP-AUTH-MIB::hpSwitchRadiusConfigGroup3,,,,,,A collection of objects for configuring the state of the RADIUS protocol.
.1.3.6.1.4.1.11.2.14.11.5.1.16.11.2.31,HP-AUTH-MIB::hpSwitchRipAuthGroup,,,,,,A collection of objects for configuring RIP authentication.
.1.3.6.1.4.1.11.2.14.11.5.1.16.11.2.32,HP-AUTH-MIB::hpSwitchAuthenticationPasswordConfigGroup,,,,,,A collection of objects for configuring the password authentication features as per UCR guidelines.
.1.3.6.1.4.1.11.2.14.11.5.1.16.11.2.33,HP-AUTH-MIB::hpSwitchUserConfigGroup2,,,,,,A collection of objects for configuring user-name/password for operator/manager/port-access.
.1.3.6.1.4.1.11.2.14.11.5.1.16.11.2.34,HP-AUTH-MIB::hpSwitchAuthLocalMgmtPrivUserGroup2,,,,,,A collection of objects for configuring Local Management Privilege Groups
.1.3.6.1.4.1.11.2.14.11.5.1.16.11.2.35,HP-AUTH-MIB::hpSwitchAuthNotificationGroup,,,,,,A collection of objects that lists the authentication  notifications.
.1.3.6.1.4.1.11.2.14.11.5.1.16.11.2.36,HP-AUTH-MIB::hpSwitchRadiusConfigGroup4,,,,,,A collection of objects for configuring the state of the RADIUS protocol.
.1.3.6.1.4.1.11.2.14.11.5.1.16.11.2.37,HP-AUTH-MIB::hpSwitchAuthenticationConfigGroup5,,,,,,A collection of objects for configuring the authentication features.
.1.3.6.1.4.1.11.2.14.11.5.1.16.11.2.38,HP-AUTH-MIB::hpSwitchUserConfigGroup3,,,,,,A collection of objects for configuring username and password for operator, manager or port-access.
.1.3.6.1.4.1.11.2.14.11.5.1.16.11.2.39,HP-AUTH-MIB::hpSwitchAuthLocalMgmtPrivUserGroup3,,,,,,A collection of objects for configuring Local Management Privilege Groups
.1.3.6.1.4.1.11.2.14.11.5.1.16.11.2.40,HP-AUTH-MIB::hpSwitchOspfAuthGroup1,,,,,,A collection of objects for configuring OSPF authentication.
.1.3.6.1.4.1.11.2.14.11.5.1.16.11.2.41,HP-AUTH-MIB::hpSwitchRipAuthGroup1,,,,,,A collection of objects for configuring RIP authentication.
.1.3.6.1.4.1.11.2.14.11.5.1.16.11.2.42,HP-AUTH-MIB::hpSwitchAuthenticationConfigGroup6,,,,,,A collection of objects for configuring the authentication features.
.1.3.6.1.4.1.11.2.14.11.5.1.16.11.2.43,HP-AUTH-MIB::hpSwitchAuthenticationConfigGroup7,,,,,,A collection of objects for configuring the authentication features.
.1.3.6.1.4.1.11.2.14.11.5.1.16.11.2.44,HP-AUTH-MIB::hpSwitchRadiusConfigGroup5,,,,,,A collection of objects for configuring the state of the RADIUS protocol.
.1.3.6.1.4.1.11.2.14.11.5.1.16.11.2.45,HP-AUTH-MIB::hpSwitchFrontPanelSecurityGroup,,,,,,A collection of objects for configuring front panel security commands.
.1.3.6.1.4.1.11.2.14.11.5.1.16.11.2.46,HP-AUTH-MIB::hpSwitchRadiusConfigGroup6,,,,,,A collection of objects for configuring the state of the RADIUS protocol.
.1.3.6.1.4.1.11.2.14.11.5.1.16.11.2.47,HP-AUTH-MIB::hpSwitchAuthenticationConfigGroup8,,,,,,A collection of objects for configuring the authentication features.
.1.3.6.1.4.1.11.2.14.11.5.1.16.11.2.48,HP-AUTH-MIB::hpSwitchRadiusConfigGroup7,,,,,,A collection of objects for configuring the state of the RADIUS protocol.
.1.3.6.1.4.1.11.2.14.11.5.1.16.11.2.49,HP-AUTH-MIB::hpSwitchAuthenticationConfigGroup9,,,,,,A collection of objects for configuring the authentication features.
.1.3.6.1.4.1.11.2.14.11.5.1.16.11.2.50,HP-AUTH-MIB::hpSwitchTacacsConfigGroup2,,,,,,A collection of objects for configuring the state of the TACACS+ protocol.
.1.3.6.1.4.1.11.2.14.11.5.1.16.11.2.51,HP-AUTH-MIB::hpSwitchTacacsStatsGroup1,,,,,,A collection of objects for viewing the status information of the TACACS+ protocol.
.1.3.6.1.4.1.11.2.14.11.5.1.16.11.2.52,HP-AUTH-MIB::hpSwitchTacacsOobmGroup1,,,,,,A collection of objects for configuring the TACACS+ server entry with support for OOBM (Out of Band Management) interface.
.1.3.6.1.4.1.11.2.14.11.5.1.16.11.2.53,HP-AUTH-MIB::hpSwitchRadiusConfigGroup8,,,,,,A collection of objects for configuring the state of the RADIUS protocol.
.1.3.6.1.4.1.11.2.14.11.5.1.16.11.2.54,HP-AUTH-MIB::hpSwitchRadiusConfigGroup9,,,,,,A collection of objects for configuring the state of the RADIUS protocol.
.1.3.6.1.4.1.11.2.14.11.5.1.16.11.2.55,HP-AUTH-MIB::hpSwitchRadiusConfigGroup10,,,,,,A collection of objects for configuring the state of the RADIUS protocol.
.1.3.6.1.4.1.11.2.14.11.5.1.16.11.2.56,HP-AUTH-MIB::hpSwitchRadiusConfigGroup11,,,,,,A collection of objects for configuring the state of the RADIUS protocol.
.1.3.6.1.4.1.11.2.14.11.5.1.16.11.2.59,HP-AUTH-MIB::hpSwitchTacacsConfigGroup3,,,,,,A collection of objects for configuring the state of the TACACS+ protocol.
.1.3.6.1.4.1.11.2.14.11.5.1.16.11.2.60,HP-AUTH-MIB::hpSwitchRadiusConfigGroup12,,,,,,A collection of objects for configuring the state of the RADIUS protocol.
.1.3.6.1.4.1.11.2.14.11.5.1.16.11.2.61,HP-AUTH-MIB::hpSwitchAAAServerGroup2,,,,,,A collection of objects for configuring RADIUS server groups.
.1.3.6.1.4.1.11.2.14.11.5.1.16.12,HP-AUTH-MIB::hpSwitchSslConfig,,,,,,
.1.3.6.1.4.1.11.2.14.11.5.1.16.12.1,HP-AUTH-MIB::hpSwitchSslAdminStatus,INTEGER,read-write,,current,disabled(1):enabled(2),This objects specifies the desired operational  status of SSL.
.1.3.6.1.4.1.11.2.14.11.5.1.16.12.2,HP-AUTH-MIB::hpSwitchSslPortNumber,Integer32,read-write,,current,,The port number on which the SSL server should listen  for connection requests.
.1.3.6.1.4.1.11.2.14.11.5.1.16.13,HP-AUTH-MIB::hpSwitchCertConfig,,,,,,
.1.3.6.1.4.1.11.2.14.11.5.1.16.13.1,HP-AUTH-MIB::hpSwitchServerCertificateOperation,INTEGER,read-write,,current,none(1):useInstalled(2):createAndUseSelfSigned(3):createCACertReq(4):applyCASignedCert(5):abortCASignedRequest(6),When this object is read, it returns the last value that was written. If a value was not set previously, then the object value will be 'none'(1). The object supports the following values and actions:  'none' - no action is taken, null operation.  'useInstalled' - This causes the switch to use a previously installed server certificate, if one is present.  'createAndUseSelfSigned' - This causes the switch to  create a new self-signed certificate based on the hpSwitchServerNewCertificate parameters and use it. 'createCACertReq' - This causes the switch to create a certificate request, which is to be signed by a CA authority, based on the hpSwitchServerNewCertificate  parameters. The user must subsequently download the signed  certificate to complete certificate creation process. 'applyCASignedCert' - This causes the switch to process the user's response to a signed certificate from a CA to complete the certificate creation process.  'abortCASignedRequest' - This causes the switch to abort the certificate request procedure, which was initiated on createAndUseCASigned set.
.1.3.6.1.4.1.11.2.14.11.5.1.16.13.2,HP-AUTH-MIB::hpSwitchServerNewRSAKeyOperation,INTEGER,read-write,,current,useInstalled(1):createBits512(2):createBits768(3):createBits1024(4):createBits2048(5),This object when will returns a value either 'useInstalled'(1) or  'createBits1024'(4).  The value 'useInstalled'(1) is returned when  a certificate RSA key already exists on switch.  The value 'createBits1024'(4) is returned when no certificate RSA key exists on switch.  When user configuresthe values, the value triggers the following action:  'useInstalled' - The switch will use the currently configured RSA key that is already present on the switch.  'createBits512' - This value is deprecated and no longer supported.   'createBits768' - This value is deprecated and no longer supported.  'createBits1024' - This value specifies the creation of a new RSA  key of length 1024-bit.  'createBits2048' - This value specifies the creation of a new RSA  key of length 2048-bit.
.1.3.6.1.4.1.11.2.14.11.5.1.16.13.3,HP-AUTH-MIB::hpSwitchServerNewCertificateStartDate,OCTET,read-write,,current,,Specifies the start date of validity for a new server  certificate.
.1.3.6.1.4.1.11.2.14.11.5.1.16.13.4,HP-AUTH-MIB::hpSwitchServerNewCertificateEndDate,OCTET,read-write,,current,,Specifies the end date of validity for a new server  certificate.
.1.3.6.1.4.1.11.2.14.11.5.1.16.13.5,HP-AUTH-MIB::hpSwitchServerNewCertificateCommonName,OCTET,read-write,,deprecated,,Specifies the common name for a new server  certificate.
.1.3.6.1.4.1.11.2.14.11.5.1.16.13.6,HP-AUTH-MIB::hpSwitchServerNewCertificateOrgUnit,OCTET,read-write,,deprecated,,Specifies the organization for a new server certificate.
.1.3.6.1.4.1.11.2.14.11.5.1.16.13.7,HP-AUTH-MIB::hpSwitchServerNewCertificateOrgName,OCTET,read-write,,deprecated,,Specifies the organization name for a new server certificate.
.1.3.6.1.4.1.11.2.14.11.5.1.16.13.8,HP-AUTH-MIB::hpSwitchServerNewCertificateCityName,OCTET,read-write,,deprecated,,Specifies the city for a new server certificate.
.1.3.6.1.4.1.11.2.14.11.5.1.16.13.9,HP-AUTH-MIB::hpSwitchServerNewCertificateStateName,OCTET,read-write,,deprecated,,Specifies the state for a new server certificate.
.1.3.6.1.4.1.11.2.14.11.5.1.16.13.10,HP-AUTH-MIB::hpSwitchServerNewCertificateCountryCode,OCTET,read-write,,current,,Specifies the 2-letter ISO country code of the server certificate.
.1.3.6.1.4.1.11.2.14.11.5.1.16.13.11,HP-AUTH-MIB::hpSwitchServerNewCertCommonName,OCTET,read-write,,current,,Specifies the common name for a new server  certificate.
.1.3.6.1.4.1.11.2.14.11.5.1.16.13.12,HP-AUTH-MIB::hpSwitchServerNewCertOrgUnit,OCTET,read-write,,current,,Specifies the organization for a new server certificate.
.1.3.6.1.4.1.11.2.14.11.5.1.16.13.13,HP-AUTH-MIB::hpSwitchServerNewCertOrgName,OCTET,read-write,,current,,Specifies the organization name for a new server certificate.
.1.3.6.1.4.1.11.2.14.11.5.1.16.13.14,HP-AUTH-MIB::hpSwitchServerNewCertCityName,OCTET,read-write,,current,,Specifies the city for a new server certificate.
.1.3.6.1.4.1.11.2.14.11.5.1.16.13.15,HP-AUTH-MIB::hpSwitchServerNewCertStateName,OCTET,read-write,,current,,Specifies the state for a new server certificate.
.1.3.6.1.4.1.11.2.14.11.5.1.16.13.16,HP-AUTH-MIB::hpSwitchServerNewCertKeySizeExists,INTEGER,read-write,,current,true(1):false(2),Specifies whether the given key size already exist.
.1.3.6.1.4.1.11.2.14.11.5.1.16.14,HP-AUTH-MIB::hpSwitchCertStatus,,,,,,
.1.3.6.1.4.1.11.2.14.11.5.1.16.14.1,HP-AUTH-MIB::hpSwitchServerCertificateType,INTEGER,read-only,,current,none(1):pendCaSigned(2):selfSigned(3):caSigned(4),Specifies the type of server certificate the switch is  currently using as follows:  'none' - no server certificate is present.  'pendCaSigned' - switch is waiting for user to offer  CA-signed certificate request.  'selfSigned' - a self-signed server certificate is being  used.  'caSigned' - a CA-signed server certificate is being  used.
.1.3.6.1.4.1.11.2.14.11.5.1.16.14.2,HP-AUTH-MIB::hpSwitchServerCertificateRSAKeySize,INTEGER,read-only,,current,none(0):bits512(1):bits768(2):bits1024(3):bits2048(4),Specifies the RSA key length of the public key contained  in the certificate as follows:  'none' - no certificate is present 'Bits512' - certificate has a 512-bit public key 'Bits768' - certificate has a 768-bit public key  'Bits1024' - certificate has a 1024-bit public key 'Bits2048' - certificate has a 2048-bit public key
.1.3.6.1.4.1.11.2.14.11.5.1.16.14.3,HP-AUTH-MIB::hpSwitchServerCertificateSerialNumber,OCTET,read-only,,current,,Specifies the serial number of installed server  certificate.
.1.3.6.1.4.1.11.2.14.11.5.1.16.14.4,HP-AUTH-MIB::hpSwitchServerCertificateStartDate,OCTET,read-only,,current,,Specifies the start date of validity of installed server  certificate.
.1.3.6.1.4.1.11.2.14.11.5.1.16.14.5,HP-AUTH-MIB::hpSwitchServerCertificateEndDate,OCTET,read-only,,current,,Specifies the end date of validity of installed server  server certificate.
.1.3.6.1.4.1.11.2.14.11.5.1.16.14.6,HP-AUTH-MIB::hpSwitchServerCertificateCommonName,OCTET,read-only,,current,,Specifies the common name of installed server  certificate.
.1.3.6.1.4.1.11.2.14.11.5.1.16.14.7,HP-AUTH-MIB::hpSwitchServerCertificateOrgUnit,OCTET,read-only,,current,,Specifies the organization of installed server  certificate.
.1.3.6.1.4.1.11.2.14.11.5.1.16.14.8,HP-AUTH-MIB::hpSwitchServerCertificateOrgName,OCTET,read-only,,current,,Specifies the organization name of installed server  certificate.
.1.3.6.1.4.1.11.2.14.11.5.1.16.14.9,HP-AUTH-MIB::hpSwitchServerCertificateCityName,OCTET,read-only,,current,,Specifies the city of installed server certificate.
.1.3.6.1.4.1.11.2.14.11.5.1.16.14.10,HP-AUTH-MIB::hpSwitchServerCertificateStateName,OCTET,read-only,,current,,Specifies the state of installed server certificate.
.1.3.6.1.4.1.11.2.14.11.5.1.16.14.11,HP-AUTH-MIB::hpSwitchServerCertificateCountryCode,OCTET,read-only,,current,,Specifies the 2-letter ISO country code of installed  server certificate.
.1.3.6.1.4.1.11.2.14.11.5.1.16.14.12,HP-AUTH-MIB::hpSwitchServerCertificateFingerprintMD5,OCTET,read-only,,current,,Specifies the MD5 fingerprint of installed server  certificate.
.1.3.6.1.4.1.11.2.14.11.5.1.16.14.13,HP-AUTH-MIB::hpSwitchServerCertificateFingerprintSHA1,OCTET,read-only,,current,,Specifies the SHA1 fingerprint of installed server  certificate.
.1.3.6.1.4.1.11.2.14.11.5.1.16.15,HP-AUTH-MIB::hpSwitchKmsChainConfigTable,,not-accessible,,current,,This table contains configuration objects for Key Management Subsystem chains.
.1.3.6.1.4.1.11.2.14.11.5.1.16.15.1,HP-AUTH-MIB::hpSwitchKmsChainConfigEntry,,not-accessible,hpSwitchKmsChainId,current,,KMS chain configuration table entry.
.1.3.6.1.4.1.11.2.14.11.5.1.16.15.1.1,HP-AUTH-MIB::hpSwitchKmsChainId,Integer32,not-accessible,,current,,This object is the KMS chain index. Do not rely on it since it may be removed in the future, when it is possible to use the object hpSwitchKmsChainName  as the index.
.1.3.6.1.4.1.11.2.14.11.5.1.16.15.1.2,HP-AUTH-MIB::hpSwitchKmsChainName,OCTET,read-create,,current,,This object configures the KMS chain name.
.1.3.6.1.4.1.11.2.14.11.5.1.16.15.1.4,HP-AUTH-MIB::hpSwitchKmsChainKeys,Gauge32,read-only,,current,,Returns the number of keys in the KMS chain.
.1.3.6.1.4.1.11.2.14.11.5.1.16.15.1.5,HP-AUTH-MIB::hpSwitchKmsChainActiveKeys,Gauge32,read-only,,current,,Returns the number of active keys in the KMS chain.
.1.3.6.1.4.1.11.2.14.11.5.1.16.15.1.6,HP-AUTH-MIB::hpSwitchKmsChainExpKeys,Gauge32,read-only,,current,,Returns the number of expired keys in the KMS chain.
.1.3.6.1.4.1.11.2.14.11.5.1.16.15.1.7,HP-AUTH-MIB::hpSwitchKmsChainStatus,INTEGER,read-create,,current,active(1):notInService(2):notReady(3):createAndGo(4):createAndWait(5):destroy(6),The status of the row in the KMS chain configuration table.
.1.3.6.1.4.1.11.2.14.11.5.1.16.16,HP-AUTH-MIB::hpSwitchKmsKeyConfigTable,,not-accessible,,current,,This table contains the configuration objects for the Key Management Subsystem.
.1.3.6.1.4.1.11.2.14.11.5.1.16.16.1,HP-AUTH-MIB::hpSwitchKmsKeyConfigEntry,,not-accessible,hpSwitchKmsKeyChainId:hpSwitchKmsKeyId,current,,KMS configuration table entry.
.1.3.6.1.4.1.11.2.14.11.5.1.16.16.1.1,HP-AUTH-MIB::hpSwitchKmsKeyChainId,Integer32,not-accessible,,current,,This object is the KMS chain index. Do not rely on it since it may be removed in the future, when it is possible to use the object hpSwitchKmsChainName as the index.
.1.3.6.1.4.1.11.2.14.11.5.1.16.16.1.2,HP-AUTH-MIB::hpSwitchKmsKeyId,Integer32,not-accessible,,current,,This object is the KMS key index.
.1.3.6.1.4.1.11.2.14.11.5.1.16.16.1.3,HP-AUTH-MIB::hpSwitchKmsKeyStr,OCTET,read-create,,current,,This object configures the KMS key chain name.
.1.3.6.1.4.1.11.2.14.11.5.1.16.16.1.4,HP-AUTH-MIB::hpSwitchKmsKeyStartTime,Unsigned32,read-create,,current,,Start time of the KMS key.
.1.3.6.1.4.1.11.2.14.11.5.1.16.16.1.5,HP-AUTH-MIB::hpSwitchKmsKeyStopTime,Unsigned32,read-create,,current,,Stop time of the KMS key.
.1.3.6.1.4.1.11.2.14.11.5.1.16.16.1.6,HP-AUTH-MIB::hpSwitchKmsKeyTxStartTime,Unsigned32,read-create,,current,,Start time of the transmission for the KMS key.
.1.3.6.1.4.1.11.2.14.11.5.1.16.16.1.7,HP-AUTH-MIB::hpSwitchKmsKeyTxStopTime,Unsigned32,read-create,,current,,Stop time of the transmission for the KMS key.
.1.3.6.1.4.1.11.2.14.11.5.1.16.16.1.8,HP-AUTH-MIB::hpSwitchKmsKeyStatus,INTEGER,read-create,,current,active(1):notInService(2):notReady(3):createAndGo(4):createAndWait(5):destroy(6),Row Status of the KMS chain configuration table.
.1.3.6.1.4.1.11.2.14.11.5.1.16.16.1.9,HP-AUTH-MIB::hpSwitchKmsKeyEncrypted,OCTET,read-create,,current,,An encrypted form of the KMS key. This object may only be read or written when hpSwitchAuthenticationEncryptCredentialsMethod is set to a value other than none(0). At most one of hpSwitchKmsKeyStr and hpSwitchKmsKeyEncrypted may be set in any transaction. This object should only be written with an encrypted key previously read from a compatible HP Networking device.
.1.3.6.1.4.1.11.2.14.11.5.1.16.17,HP-AUTH-MIB::hpSwitchOspfIfAuthTable,,not-accessible,,current,,This table supplements the OSPF interface  configuration table.
.1.3.6.1.4.1.11.2.14.11.5.1.16.17.1,HP-AUTH-MIB::hpSwitchOspfIfAuthEntry,,not-accessible,,current,,OSPF interface authentication  configuration table entry.
.1.3.6.1.4.1.11.2.14.11.5.1.16.17.1.1,HP-AUTH-MIB::hpSwitchOspfIfAuthChain,OCTET,read-create,,current,,This object configures the KMS chain name for OSPF interfaces.
.1.3.6.1.4.1.11.2.14.11.5.1.16.17.1.2,HP-AUTH-MIB::hpSwitchOspfIfAuthKeyEncrypted,OCTET,read-create,,current,,The object represents the encrypted format of authentication key stored in the object ospfIfAuthKey. This object may only be read or written when hpSwitchAuthenticationEncryptCredentialsMethod is set to a value other than none(0). This object should only be written with an encrypted key.
.1.3.6.1.4.1.11.2.14.11.5.1.16.18,HP-AUTH-MIB::hpSwitchOspfVirtIfAuthTable,,not-accessible,,current,,This table supplements the OSPF virtual  interface configuration table.
.1.3.6.1.4.1.11.2.14.11.5.1.16.18.1,HP-AUTH-MIB::hpSwitchOspfVirtIfAuthEntry,,not-accessible,,current,,OSPF virtual interface authentication  configuration table entry.
.1.3.6.1.4.1.11.2.14.11.5.1.16.18.1.1,HP-AUTH-MIB::hpSwitchOspfVirtIfAuthChain,OCTET,read-create,,current,,This object configures the KMS chain name for OSPF virtual interfaces.
.1.3.6.1.4.1.11.2.14.11.5.1.16.18.1.2,HP-AUTH-MIB::hpSwitchOspfVirtIfAuthKeyEncrypted,OCTET,read-create,,current,,This object represents the encrypted format of authentication key stored in the object ospfVirtIfAuthKey. This object may only be read or written when hpSwitchAuthenticationEncryptCredentialsMethod is set to a value other than none(0). This object should only be written with an encrypted key.
.1.3.6.1.4.1.11.2.14.11.5.1.16.19,HP-AUTH-MIB::hpicfSwitchUserConfigTable,,not-accessible,,current,,This table supplements the manager/operator name/password. The manager/operator password are limited to the CLI interface through Console and Menu interface, and web.
.1.3.6.1.4.1.11.2.14.11.5.1.16.19.1,HP-AUTH-MIB::hpicfSwitchUserConfigEntry,,not-accessible,hpicfSwitchUserConfigIndex,current,,Manager/operator name/password table entry.
.1.3.6.1.4.1.11.2.14.11.5.1.16.19.1.1,HP-AUTH-MIB::hpicfSwitchUserConfigIndex,Integer32,not-accessible,,current,,The index value uniquely identifies a row in the User Config table, currently limited to a value of 1.
.1.3.6.1.4.1.11.2.14.11.5.1.16.19.1.2,HP-AUTH-MIB::hpicfSwitchUserName,OCTET,read-create,,current,,The User Name, in ASCII format. The exact size of this object is implementation dependent; consult the product documentation to determine the supported size for a specific product.
.1.3.6.1.4.1.11.2.14.11.5.1.16.19.1.3,HP-AUTH-MIB::hpicfSwitchOperatorName,OCTET,read-create,,current,,The Operator Name, in ASCII format. The exact size of this object is implementation dependent; consult the product documentation to determine the supported size for a specific product.
.1.3.6.1.4.1.11.2.14.11.5.1.16.19.1.4,HP-AUTH-MIB::hpicfSwitchUserPassword,OCTET,read-create,,current,,The User Password, in ASCII format. The exact size of this object is implementation dependent; consult the product documentation to determine the supported  size for a specific product.
.1.3.6.1.4.1.11.2.14.11.5.1.16.19.1.5,HP-AUTH-MIB::hpicfSwitchOperatorPassword,OCTET,read-create,,current,,The Operator Password, in ASCII format. The exact size of this object is implementation dependent; consult the product documentation to determine the supported size for a specific product.
.1.3.6.1.4.1.11.2.14.11.5.1.16.19.1.6,HP-AUTH-MIB::hpicfSwitchUserConfigStatus,INTEGER,read-create,,current,active(1):notInService(2):notReady(3):createAndGo(4):createAndWait(5):destroy(6),Status of User Config Table row.
.1.3.6.1.4.1.11.2.14.11.5.1.16.19.1.7,HP-AUTH-MIB::hpicfSwitchPortAccessName,OCTET,read-create,,current,,The Port-Access Name, ASCII format. The exact size of this object is implementation dependent; consult the product documentation to determine the supported size for a specific product.
.1.3.6.1.4.1.11.2.14.11.5.1.16.19.1.8,HP-AUTH-MIB::hpicfSwitchPortAccessPassword,OCTET,read-create,,current,,The Port-Access Password, in ASCII format. The  exact size of this object is implementation  dependent; consult the product documentation to  determine the supported size for a specific  product.
.1.3.6.1.4.1.11.2.14.11.5.1.16.19.1.9,HP-AUTH-MIB::hpicfSwitchUserPasswordHashType,INTEGER,read-create,,current,unknown(0):plainText(1):sha1(3):sha256(4),The hash-type of the User Password.
.1.3.6.1.4.1.11.2.14.11.5.1.16.19.1.10,HP-AUTH-MIB::hpicfSwitchOperatorPasswordHashType,INTEGER,read-create,,current,unknown(0):plainText(1):sha1(3):sha256(4),The hash-type of the Operator Password.
.1.3.6.1.4.1.11.2.14.11.5.1.16.19.1.11,HP-AUTH-MIB::hpicfSwitchPortAccessPasswordHashType,INTEGER,read-create,,current,unknown(0):plainText(1),The hash-type of the Port-Access Password.
.1.3.6.1.4.1.11.2.14.11.5.1.16.19.1.12,HP-AUTH-MIB::hpicfSwitchUserPasswordEncrypted,OCTET,read-create,,current,,An encrypted form of the user password. The exact size of this object is implementation dependent; consult the product documentation to determine the supported  size for a specific product. This object may only be read or written when hpSwitchAuthenticationEncryptCredentialsMethod is set to a value other than none(0). At most one of hpicfSwitchUserPassword and hpicfSwitchUserPasswordEncrypted may be set in any transaction. This object should only be written with an encrypted password previously read from a compatible HP Networking device.
.1.3.6.1.4.1.11.2.14.11.5.1.16.19.1.13,HP-AUTH-MIB::hpicfSwitchOperatorPasswordEncrypted,OCTET,read-create,,current,,An encrypted form of the operator password. The exact size of this object is implementation dependent; consult the product documentation to determine the supported size for a specific product. This object may only be read or written when hpSwitchAuthenticationEncryptCredentialsMethod is set to a value other than none(0). At most one of hpicfSwitchOperatorPassword and  hpicfSwitchOperatorPasswordEncrypted may be set in any transaction. This object should only be written with an encrypted password previously read from a compatible HP Networking device.
.1.3.6.1.4.1.11.2.14.11.5.1.16.19.1.14,HP-AUTH-MIB::hpicfSwitchPortAccessPasswordEncrypted,OCTET,read-create,,current,,An encrypted form of the port-access password. The  exact size of this object is implementation  dependent; consult the product documentation to  determine the supported size for a specific  product. This object may only be read or written when hpSwitchAuthenticationEncryptCredentialsMethod is set to a value other than none(0). At most one of hpicfSwitchPortAccessPassword and  hpicfSwitchPortAccessPasswordEncrypted may be set in any transaction. This object should only be written with an encrypted password previously read from a compatible HP Networking device.
.1.3.6.1.4.1.11.2.14.11.5.1.16.19.1.15,HP-AUTH-MIB::hpicfSwitchBypassUsername,INTEGER,read-create,,current,enable(1):disable(2),This object controls bypassing of the username while  accessing the switch to get Operator or Manager access. When enabled, the Manager level and Operator level  usernames are bypassed and authentication based on  password takes place.  If custom usernames are configured, this configuration is ignored and authentication based on both username and password takes place.  The default value is 'disable' and user is authenticated  based on both username and password.
.1.3.6.1.4.1.11.2.14.11.5.1.16.19.1.16,HP-AUTH-MIB::hpicfSwitchUserPwdAgingInterval,Integer32,read-create,,current,,This object holds the manager password aging value.
.1.3.6.1.4.1.11.2.14.11.5.1.16.19.1.17,HP-AUTH-MIB::hpicfSwitchOperatorPwdAgingInterval,Integer32,read-create,,current,,This object holds the operator password aging value.
.1.3.6.1.4.1.11.2.14.11.5.1.16.19.1.18,HP-AUTH-MIB::hpicfSwitchUserPwdLengthValue,Integer32,read-create,,current,,This object holds length of the manager password. 
.1.3.6.1.4.1.11.2.14.11.5.1.16.19.1.19,HP-AUTH-MIB::hpicfSwitchOperatorPwdLengthValue,Integer32,read-create,,current,,This object holds length of the operator password. 
.1.3.6.1.4.1.11.2.14.11.5.1.16.19.1.20,HP-AUTH-MIB::hpicfSwitchNonPlaintextSha256,INTEGER,read-create,,current,enable(1):disable(2),This object enables storing the password in SHA-256 form.
.1.3.6.1.4.1.11.2.14.11.5.1.16.19.1.21,HP-AUTH-MIB::hpicfSwitchUserPasswordHashSha256,OCTET,read-create,,current,,The SHA256 hash-type of the Manager Password.
.1.3.6.1.4.1.11.2.14.11.5.1.16.19.1.22,HP-AUTH-MIB::hpicfSwitchOperatorPasswordHashSha256,OCTET,read-create,,current,,The SHA256 hash-type of the Operator Password.
.1.3.6.1.4.1.11.2.14.11.5.1.16.20,HP-AUTH-MIB::hpSwitchAAAServerGroupTable,,not-accessible,,current,,This table lists the RADIUS server groups.
.1.3.6.1.4.1.11.2.14.11.5.1.16.20.1,HP-AUTH-MIB::hpSwitchAAAServerGroupEntry,,not-accessible,hpSwitchAAAServerGroupProtocolType:hpSwitchAAAServerGroupIndex:hpSwitchAAAServerGroupServerIndex,current,,RADIUS server group entry.
.1.3.6.1.4.1.11.2.14.11.5.1.16.20.1.1,HP-AUTH-MIB::hpSwitchAAAServerGroupProtocolType,INTEGER,not-accessible,,current,radius(1):tacacs(2),This part of the index indicates which protocol server the server group is for. See the documentation protocols supported.
.1.3.6.1.4.1.11.2.14.11.5.1.16.20.1.2,HP-AUTH-MIB::hpSwitchAAAServerGroupIndex,Integer32,not-accessible,,current,,This index indicates the server group in the AAA server group table.
.1.3.6.1.4.1.11.2.14.11.5.1.16.20.1.3,HP-AUTH-MIB::hpSwitchAAAServerGroupServerIndex,Integer32,not-accessible,,current,,The index value which identifies the server in the server group.
.1.3.6.1.4.1.11.2.14.11.5.1.16.20.1.4,HP-AUTH-MIB::hpSwitchAAAServerGroupName,OCTET,read-create,,current,,The name of a given AAA server group. The current  maximum length is 12.
.1.3.6.1.4.1.11.2.14.11.5.1.16.20.1.5,HP-AUTH-MIB::hpSwitchAAAServerGroupServerInetType,INTEGER,read-create,,current,unknown(0):ipv4(1):ipv6(2):ipv4z(3):ipv6z(4):dns(16),The IP Address type of the server. Currently only Ipv4 is supported.
.1.3.6.1.4.1.11.2.14.11.5.1.16.20.1.6,HP-AUTH-MIB::hpSwitchAAAServerGroupServerInetAddr,OCTET,read-create,,current,,The IP Address of the server.
.1.3.6.1.4.1.11.2.14.11.5.1.16.20.1.7,HP-AUTH-MIB::hpSwitchAAAServerGroupStatus,INTEGER,read-create,,current,active(1):notInService(2):notReady(3):createAndGo(4):createAndWait(5):destroy(6),The status of the AAA server group row. Supported values are createAndGo, destroy, and active.
.1.3.6.1.4.1.11.2.14.11.5.1.16.20.1.8,HP-AUTH-MIB::hpSwitchAAAServerGroupServerFqdn,OCTET,read-create,,current,,The FQDN address of RADIUS Server. When the RADIUS server  has been configured with IPv6 address of IPv4 address,  the value of this object will be set to Null.
.1.3.6.1.4.1.11.2.14.11.5.1.16.20.1.9,HP-AUTH-MIB::hpSwitchAAAServerGroupTLSEnable,INTEGER,read-create,,current,true(1):false(2),This object differentiates whether the RADIUS  server connection is TLS enabled or not.â By default, it is not TLS enabled.
.1.3.6.1.4.1.11.2.14.11.5.1.16.21,HP-AUTH-MIB::hpSwitchLocalMgmtPrivUsernamesTable,,not-accessible,,current,,This table lists the Local Management Privilege user names.
.1.3.6.1.4.1.11.2.14.11.5.1.16.21.1,HP-AUTH-MIB::hpSwitchLocalMgmtPrivUsernamesEntry,,not-accessible,hpSwitchLocalMgmtPrivUsernameIndex,current,,Local Management Usernames entry.
.1.3.6.1.4.1.11.2.14.11.5.1.16.21.1.1,HP-AUTH-MIB::hpSwitchLocalMgmtPrivUsernameIndex,Integer32,not-accessible,,current,,The index value uniquely identifies a row in the command table.
.1.3.6.1.4.1.11.2.14.11.5.1.16.21.1.2,HP-AUTH-MIB::hpSwitchLocalMgmtPrivUsernameStr,OCTET,read-create,,current,,The username .
.1.3.6.1.4.1.11.2.14.11.5.1.16.21.1.3,HP-AUTH-MIB::hpSwitchLocalMgmtPrivUsernamePasswdType,INTEGER,read-create,,current,unknown(0):sha1(3):sha256(4),The type of encryption used for this Conceptual row password object.
.1.3.6.1.4.1.11.2.14.11.5.1.16.21.1.4,HP-AUTH-MIB::hpSwitchLocalMgmtPrivUsernamePasswd,OCTET,read-create,,current,,Storage location for the password associated  with this Username. Always returns a NULL string.
.1.3.6.1.4.1.11.2.14.11.5.1.16.21.1.5,HP-AUTH-MIB::hpSwitchLocalMgmtPrivUsernameGrpIndex,Integer32,read-create,,current,,The index that represents which group this user is a member of.
.1.3.6.1.4.1.11.2.14.11.5.1.16.21.1.6,HP-AUTH-MIB::hpSwitchLocalMgmtPrivUsernameStatus,INTEGER,read-create,,current,active(1):notInService(2):notReady(3):createAndGo(4):createAndWait(5):destroy(6),The status of the Local Management Privilege username row.
.1.3.6.1.4.1.11.2.14.11.5.1.16.21.1.7,HP-AUTH-MIB::hpSwitchLocalMgmtPwdUserAgingInterval,Integer32,read-create,,current,,This object holds the user password aging value.
.1.3.6.1.4.1.11.2.14.11.5.1.16.21.1.8,HP-AUTH-MIB::hpSwitchLocalMgmtPwdUserPasswdLengthValue,Integer32,read-create,,current,,This object holds length of local user password. 
.1.3.6.1.4.1.11.2.14.11.5.1.16.21.1.9,HP-AUTH-MIB::hpSwitchLocalMgmtPrivUsernamePasswdSha256,OCTET,read-create,,current,,Storage location for the sha256 password associated  with this Username. Always returns a NULL string.
.1.3.6.1.4.1.11.2.14.11.5.1.16.23,HP-AUTH-MIB::hpSwitchRipIfAuthTable,,not-accessible,,current,,This table supplements the RIP interface configuration table.
.1.3.6.1.4.1.11.2.14.11.5.1.16.23.1,HP-AUTH-MIB::hpSwitchRipIfAuthEntry,,not-accessible,,current,,RIP interface authentication configuration table entry.
.1.3.6.1.4.1.11.2.14.11.5.1.16.23.1.1,HP-AUTH-MIB::hpSwitchRipIfAuthChain,OCTET,read-create,,current,,This object configures the KMS chain name for RIP interfaces.
.1.3.6.1.4.1.11.2.14.11.5.1.16.23.1.2,HP-AUTH-MIB::hpSwitchRip2IfConfAuthKeyEncrypted,OCTET,read-create,,current,,This object represents the encrypted format of the authentication key stored in the object rip2IfConfAuthKey. This object may only be read or written when hpSwitchAuthenticationEncryptCredentialsMethod is set to a value other than none(0). This object should only be written with an encrypted key.
.1.3.6.1.4.1.11.2.14.11.5.1.16.24,HP-AUTH-MIB::hpSwitchAuthenPwdCompositionTable,,not-accessible,,current,,This table lists different type of charaters required to create a password  as per UCR guidelines. 
.1.3.6.1.4.1.11.2.14.11.5.1.16.24.1,HP-AUTH-MIB::hpSwitchAuthenPwdCompositionEntry,,not-accessible,hpSwitchAuthenCompositionIndex,current,,An Authentication Method Table Entry.
.1.3.6.1.4.1.11.2.14.11.5.1.16.24.1.1,HP-AUTH-MIB::hpSwitchAuthenCompositionIndex,INTEGER,not-accessible,,current,lowerCase(1):upperCase(2):specialCharacter(3):number(4),This object indicates the different types of charaters required to create a password.
.1.3.6.1.4.1.11.2.14.11.5.1.16.24.1.2,HP-AUTH-MIB::hpSwitchAuthenCompositionValue,Integer32,read-write,,current,,This object indicates number of characters  allow for password compostion 
.1.3.6.1.4.1.11.2.14.11.5.1.16.25,HP-AUTH-MIB::hpSwitchAuthenticationPasswordConfig,,,,,,
.1.3.6.1.4.1.11.2.14.11.5.1.16.25.1,HP-AUTH-MIB::hpSwitchAuthPwdControlCheck,INTEGER,read-write,,current,enable(1):disable(2),This object enables the password configuration feature.
.1.3.6.1.4.1.11.2.14.11.5.1.16.25.2,HP-AUTH-MIB::hpSwitchAuthPwdUserNameCheck,INTEGER,read-write,,current,enable(1):disable(2),This object enables the check to ensure that the password does not contain repeat or reverse characters of the associated username.
.1.3.6.1.4.1.11.2.14.11.5.1.16.25.3,HP-AUTH-MIB::hpSwitchAuthPwdRepeatCharactersCheck,INTEGER,read-write,,current,enable(1):disable(2),This object enables the check that the password does  not contain at least three of the same characters used consecutively.
.1.3.6.1.4.1.11.2.14.11.5.1.16.25.4,HP-AUTH-MIB::hpSwitchAuthPwdRepeatPasswordCheck,INTEGER,read-write,,current,enable(1):disable(2),This object enables the check that the new password differs  from the previous password by at least four characters.
.1.3.6.1.4.1.11.2.14.11.5.1.16.25.5,HP-AUTH-MIB::hpSwitchAuthPwdAgingCheck,INTEGER,read-write,,current,enable(1):disable(2),This object enables the check for the password expiry check.
.1.3.6.1.4.1.11.2.14.11.5.1.16.25.6,HP-AUTH-MIB::hpSwitchAuthPwdLogonDetailsCheck,INTEGER,read-write,,current,enable(1):disable(2),This object enables the previous login details.
.1.3.6.1.4.1.11.2.14.11.5.1.16.25.7,HP-AUTH-MIB::hpSwitchAuthPwdAgingValue,Integer32,read-write,,current,,This object provides the global aging value.
.1.3.6.1.4.1.11.2.14.11.5.1.16.25.8,HP-AUTH-MIB::hpSwitchAuthPwdHistoryCheck,INTEGER,read-write,,current,enable(1):disable(2),This object enables the password history check.
.1.3.6.1.4.1.11.2.14.11.5.1.16.25.9,HP-AUTH-MIB::hpSwitchAuthPwdHistoryRecordsRange,Integer32,read-write,,current,,This object indicates the number of password history records.
.1.3.6.1.4.1.11.2.14.11.5.1.16.25.10,HP-AUTH-MIB::hpSwitchAuthPwdAlertBeforeExpiry,Integer32,read-write,,current,,This object indicates the period, in days, by  which the user needs to be alerted before the password expiry.
.1.3.6.1.4.1.11.2.14.11.5.1.16.25.11,HP-AUTH-MIB::hpSwitchAuthPwdExpiredUserLoginDays,Integer32,read-write,,current,,This object indicates the period, in days,  for which the user will be allowed to login after password expiry.
.1.3.6.1.4.1.11.2.14.11.5.1.16.25.12,HP-AUTH-MIB::hpSwitchAuthPwdExpiredUserLoginAttempts,Integer32,read-write,,current,,This object indicates the number of times the user will  be allowed to login to the switch after the expiry  of the password.
.1.3.6.1.4.1.11.2.14.11.5.1.16.25.13,HP-AUTH-MIB::hpSwitchAuthPwdUpdateInterval,Integer32,read-write,,current,,This object indicates the minimum time, in hours, before  which the user is not allowed to change the password.
.1.3.6.1.4.1.11.2.14.11.5.1.16.26,HP-AUTH-MIB::hpSwitchFrontPanelSecurity,,,,,,
.1.3.6.1.4.1.11.2.14.11.5.1.16.26.1,HP-AUTH-MIB::hpSwitchFpsPasswordClear,INTEGER,read-write,,current,enable(0):enablewithreset(1):disable(2),This object enables or disables the front panel security password clear command.
.1.3.6.1.4.1.11.2.14.11.5.1.16.26.2,HP-AUTH-MIB::hpSwitchFpsFactoryReset,INTEGER,read-write,,current,enable(0):disable(1),This object enables or disables the front panel security  factory reset command.
.1.3.6.1.4.1.11.2.14.11.5.1.16.26.3,HP-AUTH-MIB::hpSwitchFpsPasswordRecovery,INTEGER,read-write,,current,off(0):normal(1):strong(2),This object enables or disables the front panel security  password recovery command.
.1.3.6.1.4.1.11.2.14.11.5.1.16.26.4,HP-AUTH-MIB::hpSwitchFpsDiagnosticResetClearButton,INTEGER,read-write,,current,enable(0):disable(1),This object enables or disables the front panel security  diagnostic reset clear button command.
.1.3.6.1.4.1.11.2.14.11.5.1.16.26.5,HP-AUTH-MIB::hpSwitchFpsDiagnosticResetSerialConsole,INTEGER,read-write,,current,enable(0):disable(1),This object enables or disables the front panel security  diagnostic reset serial console command.
.1.3.6.1.4.1.11.2.14.11.5.1.16.26.6,HP-AUTH-MIB::hpSwitchFpsDisplayInConfig,INTEGER,read-write,,current,enable(0):disable(1),This object enables or disables the front panel security display in config command.
.1.3.6.1.4.1.11.2.14.11.5.1.16.27,HP-AUTH-MIB::hpSwitchAAAServerGroupNasTable,,not-accessible,,current,,This table lists the RADIUS server groups with nas-id.
.1.3.6.1.4.1.11.2.14.11.5.1.16.27.1,HP-AUTH-MIB::hpSwitchAAAServerGroupNasEntry,,not-accessible,hpSwitchAAAServerGroupNasProtocolType:hpSwitchAAAServerGroupNasIndex,current,,RADIUS server group entry.
.1.3.6.1.4.1.11.2.14.11.5.1.16.27.1.1,HP-AUTH-MIB::hpSwitchAAAServerGroupNasProtocolType,INTEGER,not-accessible,,current,radius(1):tacacs(2),This part of the index indicates the protocol type for the server group.
.1.3.6.1.4.1.11.2.14.11.5.1.16.27.1.2,HP-AUTH-MIB::hpSwitchAAAServerGroupNasIndex,Integer32,not-accessible,,current,,This index indicates the server group in the AAA server group table.
.1.3.6.1.4.1.11.2.14.11.5.1.16.27.1.3,HP-AUTH-MIB::hpSwitchAAAServerGroupNasName,OCTET,read-create,,current,,The name of a given AAA server group. The current  maximum length is 12.
.1.3.6.1.4.1.11.2.14.11.5.1.16.27.1.4,HP-AUTH-MIB::hpSwitchAAAServerGroupNasId,OCTET,read-create,,current,,The NAS-ID for the RADIUS Server group. Maximum length is 32.
.1.3.6.1.4.1.11.2.14.11.5.1.16.27.1.5,HP-AUTH-MIB::hpSwitchAAAServerGroupNasStatus,INTEGER,read-create,,current,active(1):notInService(2):notReady(3):createAndGo(4):createAndWait(5):destroy(6),The status of the AAA server group row. Supported values are createAndGo, destroy, and active.
.1.3.6.1.4.1.11.2.14.11.5.1.17,HP-ICF-OID::hpSwitchAccountingMIB,,,,,,
.1.3.6.1.4.1.11.2.14.11.5.1.17.1,HP-ACCT-MIB::hpSwitchAccountingConfig,,,,,,
.1.3.6.1.4.1.11.2.14.11.5.1.17.1.1,HP-ACCT-MIB::hpSwitchAcctUpdateInterval,Integer32,read-write,,current,,Defines periodic intervals to send accounting  update records (in minutes).
.1.3.6.1.4.1.11.2.14.11.5.1.17.1.2,HP-ACCT-MIB::hpSwitchAcctSuppressNullUserName,INTEGER,read-write,,current,yes(1):no(2),An indication of whether accounting records need to be generated for users, whose username string is NULL. If yes(1), then prevent accounting records from being generated.
.1.3.6.1.4.1.11.2.14.11.5.1.17.1.3,HP-ACCT-MIB::hpSwitchAcctSessionIdentification,INTEGER,read-write,,current,unique(1):common(2),Specifies how accounting sessions for different accounting service types will be identified. unique - use a unique accounting session identifier in accounting records for each accounting service type (network, exec, system, commands). common - use identical accounting session identifier in all accounting records sent out of switch for a given user's access session, irrespective to the accounting service type that generates the records within the session.
.1.3.6.1.4.1.11.2.14.11.5.1.17.2,HP-ACCT-MIB::hpSwitchAcctServiceTable,,not-accessible,,current,,This table lists the accounting service types, accounting methods and the way of how accounting sessions should be initiated or terminated.
.1.3.6.1.4.1.11.2.14.11.5.1.17.2.1,HP-ACCT-MIB::hpSwitchAcctServiceEntry,,not-accessible,hpSwitchAcctServiceIndex,current,,An accounting service table entry.
.1.3.6.1.4.1.11.2.14.11.5.1.17.2.1.1,HP-ACCT-MIB::hpSwitchAcctServiceIndex,INTEGER,not-accessible,,current,network(1):exec(2):system(3):commands(4),Specifies the accounting service type configured on  the switch.
.1.3.6.1.4.1.11.2.14.11.5.1.17.2.1.2,HP-ACCT-MIB::hpSwitchAcctServiceMethod,INTEGER,read-write,,current,none(1):radius(2):syslog(3),Specifies the method used for accounting.
.1.3.6.1.4.1.11.2.14.11.5.1.17.2.1.3,HP-ACCT-MIB::hpSwitchAcctServiceMode,INTEGER,read-write,,current,none(1):startStop(2):stopOnly(3):interimUpdate(4),Specifies how the progress of accounting session will be reported.
.1.3.6.1.4.1.11.2.14.11.5.1.17.2.1.4,HP-ACCT-MIB::hpSwitchAcctServiceServerGroupName,OCTET,read-write,,current,,The name that defines the RADIUS server group that this authentication method is associated with. See the documentation for the maximum length of the group name.
.1.3.6.1.4.1.11.2.14.11.5.1.17.3,HP-ACCT-MIB::hpSwitchAccountingMIBConformance,,,,,,
.1.3.6.1.4.1.11.2.14.11.5.1.17.3.1,HP-ACCT-MIB::hpSwitchAccountingMIBCompliances,,,,,,
.1.3.6.1.4.1.11.2.14.11.5.1.17.3.1.1,HP-ACCT-MIB::hpSwitchAccountingMIBCompliance,,,,,,The compliance statement for devices implementing the HP Accounting Mib.
.1.3.6.1.4.1.11.2.14.11.5.1.17.3.2,HP-ACCT-MIB::hpSwitchAccountingMIBGroups,,,,,,
.1.3.6.1.4.1.11.2.14.11.5.1.17.3.2.1,HP-ACCT-MIB::hpSwitchAccountingConfigGroup,,,,,,A collection of objects for configuring the accounting features.
.1.3.6.1.4.1.11.2.14.11.5.1.18,HP-ICF-OID::hpicfXrrpMIB,,,,,,
.1.3.6.1.4.1.11.2.14.11.5.1.18.1,HP-ICF-XRRP::hpicfXrrpNotifications,,,,,,
.1.3.6.1.4.1.11.2.14.11.5.1.18.1.0,HP-ICF-XRRP::hpicfXrrpNotificationsPrefix,,,,,,
.1.3.6.1.4.1.11.2.14.11.5.1.18.1.0.1,HP-ICF-XRRP::hpicfXrrpTrapStateChange,,,,,,This trap indicates that a XRRP router has changed state. The trap contains the domain number, the router  coordinator number and state value for the change. This trap is being controlled by the state of 'hpicfXrrpTrapCntl' object.
.1.3.6.1.4.1.11.2.14.11.5.1.18.1.0.2,HP-ICF-XRRP::hpicfXrrpTrapAuthFailure,,,,,,This trap indicates that the authentication error occurred on a XRRP VLAN. The trap contains the domain number, this router number, instance id (owner router number and VLAN ID) that detected the error and type of the authentication error. This trap is being controlled by the state of 'hpicfXrrpTrapCntl' object.
.1.3.6.1.4.1.11.2.14.11.5.1.18.1.1,HP-ICF-XRRP::hpicfXrrpNotificationsObjects,,,,,,
.1.3.6.1.4.1.11.2.14.11.5.1.18.1.1.1,HP-ICF-XRRP::hpicfXrrpTrapAuthErrorType,INTEGER,accessible-for-notify,,current,invalidAuthType(1):authTypeMismatch(2):authFailure(3),Potential types of configuration conflicts. Used by hpicfXrrpTrapAuthFailure trap.
.1.3.6.1.4.1.11.2.14.11.5.1.18.2,HP-ICF-XRRP::hpicfXrrpOperations,,,,,,
.1.3.6.1.4.1.11.2.14.11.5.1.18.2.1,HP-ICF-XRRP::hpicfXrrpVersion,Integer32,read-only,,current,,This value identifies the particular version of the XRRP supported by this device.
.1.3.6.1.4.1.11.2.14.11.5.1.18.2.2,HP-ICF-XRRP::hpicfXrrpAdminState,INTEGER,read-write,,current,enable(1):disable(2),The administrative state of the XRRP protocol on the box.
.1.3.6.1.4.1.11.2.14.11.5.1.18.2.3,HP-ICF-XRRP::hpicfXrrpDomain,Integer32,read-write,,current,,Domain that this router is in. The router can only be in  one domain. Routers in the same domain can fail-over for  each other. Up to 2 routers that have common VLANs can use the same XRRP Domain.
.1.3.6.1.4.1.11.2.14.11.5.1.18.2.4,HP-ICF-XRRP::hpicfXrrpRouterId,Integer32,read-write,,current,,Unique number for this router within a given domain. The router number (in combination with a VLAN ID) is  used as an identifier for an XRRP instance within a domain. Along with 'hpicfXrrpDomain' it is used to  create the XRRP MAC address for the XRRP instance this  router owns. No two routers in the same domain can have the same router number in the same level 2 switching  fabric.
.1.3.6.1.4.1.11.2.14.11.5.1.18.2.5,HP-ICF-XRRP::hpicfXrrpFailback,Integer32,read-write,,current,,Delay a router must wait before it can reclaim control  back up. This prevents any crashing for intermittent  failures.
.1.3.6.1.4.1.11.2.14.11.5.1.18.2.6,HP-ICF-XRRP::hpicfXrrpTrapCntl,BITS,read-write,,current,stateChange(0):masterState(1):authFailure(2),Indicates whether the XRRP-enabled router will generate SNMP traps for events defined in this MIB. The set bit means 'enabled'. - stateChange(0) This bit controls whether the notification trap is allowed to be send when virtual router changes the state. - masterState(1) This bit controls whether the notification trap is allowed to be send when virtual router transitions  to the Master state. - authFailure(2) This bit controls whether the notification trap is allowed to be send when virtual router detects an  authentication error.
.1.3.6.1.4.1.11.2.14.11.5.1.18.2.7,HP-ICF-XRRP::hpicfXrrpInstancesTable,,not-accessible,,current,,A table that contains operational characteristics of the virtual routers (XRRP instances) configured on this routing device. Currently on a given router for a given VLAN up to  2 instances can be supported (i.e. router can be the owner  of one XRRP instance and backup up to one other). The  theoretical maximum of XRRP instances on the router can  be MAX_VLAN*2, currently it is limited to 512.
.1.3.6.1.4.1.11.2.14.11.5.1.18.2.7.1,HP-ICF-XRRP::hpicfXrrpInstanceEntry,,not-accessible,hpicfXrrpInstanceRouterId:hpicfXrrpInstanceVlanId,current,,An entry (row) in the 'hpicfXrrpInstancesTable' containing the operational characteristics of the specific virtual  router (XRRP instance) configured on this device.
.1.3.6.1.4.1.11.2.14.11.5.1.18.2.7.1.1,HP-ICF-XRRP::hpicfXrrpInstanceRouterId,Integer32,not-accessible,,current,,The router number which owns the virtual router interface (XRRP instance). In combination with  'hpicfXrrpInstanceVlanId' used as an index value to  uniquely identify a row in the  'hpicfXrrpInstancesTable' table.
.1.3.6.1.4.1.11.2.14.11.5.1.18.2.7.1.2,HP-ICF-XRRP::hpicfXrrpInstanceVlanId,Integer32,not-accessible,,current,,The VLAN ID where the virtual router (XRRP instance) is  running on. In combination with 'hpicfXrrpInstanceRouterId' is used as an index value to uniquely identify a row in the  'hpicfXrrpInstancesTable' table.
.1.3.6.1.4.1.11.2.14.11.5.1.18.2.7.1.3,HP-ICF-XRRP::hpicfXrrpInstanceOperState,INTEGER,read-only,,current,initialize(1):backup(2):master(3):vlandown(4),The current state of the virtual router (XRRP instance) configured on this device. This object has the following  defined values: - `initialize', which indicates that the virtual router (XRRP instance) is waiting for a startup event. - `backup', which indicates that virtual router (XRRP  instance) is monitoring the availability of the Master. - `master', which indicates that the given virtual router (XRRP instance) is forwarding packets for the IP  addresses associated with it, i.e. is in the Master  state. - 'vlandown', which indicates that the VLAN associated  with this virtual router (XRRP instance) is in down  state.
.1.3.6.1.4.1.11.2.14.11.5.1.18.2.7.1.4,HP-ICF-XRRP::hpicfXrrpInstanceAuthType,INTEGER,read-create,,current,noAuthentication(1):simpleTextPassword(2),Authentication type used for VRRP protocol exchanges between virtual routers. - 'noAuthentication' means that VRRP protocol exchanges  are notauthenticated. - 'simpleTextPassword' means that exchanges are  authenticated by a clear text password.
.1.3.6.1.4.1.11.2.14.11.5.1.18.2.7.1.5,HP-ICF-XRRP::hpicfXrrpInstanceAuthKey,OCTET,read-create,,current,,This is an authentication string that is used to  authenticate encapsulated VRRP packets received from other routers the XRRP instance is composed. This value  must be consistently defined across the routers that  form this XRRP instance. When read, it always returns an  Octet String of length zero.
.1.3.6.1.4.1.11.2.14.11.5.1.18.2.7.1.6,HP-ICF-XRRP::hpicfXrrpInstanceAdvertiseInterval,Integer32,read-create,,current,,This parameter defines the advertisement interval in  seconds for XRRP packets sent out by the Master of the  XRRP instance.
.1.3.6.1.4.1.11.2.14.11.5.1.18.2.7.1.7,HP-ICF-XRRP::hpicfXrrpInstanceUpTime,TimeTicks,read-only,,current,,This is the value of the `sysUpTime' object when the XRRP instance transitioned out of `initialized' state.
.1.3.6.1.4.1.11.2.14.11.5.1.18.2.7.1.8,HP-ICF-XRRP::hpicfXrrpInstanceRowStatus,INTEGER,read-create,,current,active(1):notInService(2):notReady(3):createAndGo(4):createAndWait(5):destroy(6),Status of the row in the 'hpicfXrrpInstancesTable'.
.1.3.6.1.4.1.11.2.14.11.5.1.18.2.8,HP-ICF-XRRP::hpicfXrrpInstanceAssoIpAddrTable,,not-accessible,,current,,This table contains IP addresses associated with  virtual routers (XRRP instances) configured on this device.
.1.3.6.1.4.1.11.2.14.11.5.1.18.2.8.1,HP-ICF-XRRP::hpicfXrrpInstanceAssoIpAddrEntry,,not-accessible,hpicfXrrpInstanceRouterId:hpicfXrrpInstanceVlanId:hpicfXrrpAssoIpAddr,current,,An entry in the 'hpicfXrrpInstanceAssoIpAddrTable'. The number of rows will be equal the number of IP  addresses backed up by the all XRRP instances on this device.
.1.3.6.1.4.1.11.2.14.11.5.1.18.2.8.1.1,HP-ICF-XRRP::hpicfXrrpAssoIpAddr,IpAddress,not-accessible,,current,,The backed up IP address configured on the VLAN  'hpicfXrrpInstanceVlanId' of the router 'hpicfXrrpInstanceRouterId'.
.1.3.6.1.4.1.11.2.14.11.5.1.18.2.8.1.2,HP-ICF-XRRP::hpicfXrrpAssoIpMask,IpAddress,read-create,,current,,The subnet mask for the IP address.
.1.3.6.1.4.1.11.2.14.11.5.1.18.2.8.1.3,HP-ICF-XRRP::hpicfXrrpAssoRowStatus,INTEGER,read-create,,current,active(1):notInService(2):notReady(3):createAndGo(4):createAndWait(5):destroy(6),The status of the row in  'hpicfXrrpInstanceAssoIpAddrTable'.
.1.3.6.1.4.1.11.2.14.11.5.1.18.2.9,HP-ICF-XRRP::hpicfXrrpTransferControl,INTEGER,read-write,,current,transferCtrl(1):notransferCtrl(2),When this object is set to transferCtrl (1), it acts as a trigger to intimate XRRP of the transfer of control from one router to another. When read, this object always returns  notransferCtrl (2).
.1.3.6.1.4.1.11.2.14.11.5.1.18.2.10,HP-ICF-XRRP::hpicfXrrpInfiniteFailback,INTEGER,read-write,,current,enable(1):disable(2),When this object is set to enable (1), it sets the XRRP router on infinite failback. On initialization,  the default value is disable (2).
.1.3.6.1.4.1.11.2.14.11.5.1.18.3,HP-ICF-XRRP::hpicfXrrpStatistics,,,,,,
.1.3.6.1.4.1.11.2.14.11.5.1.18.3.1,HP-ICF-XRRP::hpicfXrrpStatsXrrpMacAddress,OCTET,read-only,,current,,MAC Address used for XRRP instances for which this  router is the owner. Value is determined by XRRP  domain and unique router number.
.1.3.6.1.4.1.11.2.14.11.5.1.18.3.2,HP-ICF-XRRP::hpicfXrrpStatsMacAndMask,OCTET,read-only,,current,,This value contains the current AND mask used by XRRP to  determine which MAC addresses can be received for routing.
.1.3.6.1.4.1.11.2.14.11.5.1.18.3.3,HP-ICF-XRRP::hpicfXrrpStatsPktsRcvd,Counter32,read-only,,current,,This value contains the number of XRRP packets received  by the router.
.1.3.6.1.4.1.11.2.14.11.5.1.18.3.4,HP-ICF-XRRP::hpicfXrrpStatsNotDomainPktsReject,Counter32,read-only,,current,,This value contains the number of XRRP packets  received from the other domains.
.1.3.6.1.4.1.11.2.14.11.5.1.18.3.5,HP-ICF-XRRP::hpicfXrrpStatsCheckSumPktsReject,Counter32,read-only,,current,,This value contains the number of XRRP packets rejected due to checksum errors.
.1.3.6.1.4.1.11.2.14.11.5.1.18.3.6,HP-ICF-XRRP::hpicfXrrpStatsBadValuePktsReject,Counter32,read-only,,current,,This value contains the number of received XRRP packets  with bad values.
.1.3.6.1.4.1.11.2.14.11.5.1.18.3.7,HP-ICF-XRRP::hpicfXrrpStatsCorruptedPktsReject,Counter32,read-only,,current,,This value contains the number of received XRRP packets  that are too short.
.1.3.6.1.4.1.11.2.14.11.5.1.18.3.8,HP-ICF-XRRP::hpicfXrrpStatsVersionErrorPktsReject,Counter32,read-only,,current,,This value contains the number of received XRRP packets  with wrong version number.
.1.3.6.1.4.1.11.2.14.11.5.1.18.3.9,HP-ICF-XRRP::hpicfXrrpStatsBcastArpsXmtd,Counter32,read-only,,current,,This value contains the number of broacast arps sent.
.1.3.6.1.4.1.11.2.14.11.5.1.18.3.10,HP-ICF-XRRP::hpicfXrrpStatsUpTime,TimeTicks,read-only,,current,,This is the value of the `sysUpTime' object when the XRRP protocol has been last enabled. Used to count elapsed time since last XRRP enable action.
.1.3.6.1.4.1.11.2.14.11.5.1.18.3.11,HP-ICF-XRRP::hpicfXrrpStatsProtocolCreateTime,TimeTicks,read-only,,current,,The value of sysUpTime when XRRP protocol was last activated (initialized). This can be used for polling  applications to detect discontinuity in the above statistics counters if protocol has been reinitialized between polls.
.1.3.6.1.4.1.11.2.14.11.5.1.18.3.12,HP-ICF-XRRP::hpicfXrrpStatsInstancesTable,,not-accessible,,current,,A table that contains statistics information for  the XRRP instances on the router.
.1.3.6.1.4.1.11.2.14.11.5.1.18.3.12.1,HP-ICF-XRRP::hpicfXrrpStatsInstanceEntry,,not-accessible,hpicfXrrpInstanceRouterId:hpicfXrrpInstanceVlanId,current,,Information about a specific XRRP instance.
.1.3.6.1.4.1.11.2.14.11.5.1.18.3.12.1.1,HP-ICF-XRRP::hpicfXrrpStatsInstancePktsRcvd,Counter32,read-only,,current,,This value contains the number of XRRP packets received  by the virtual router (XRRP instance).
.1.3.6.1.4.1.11.2.14.11.5.1.18.3.12.1.2,HP-ICF-XRRP::hpicfXrrpStatsInstancePktsXmtd,Counter32,read-only,,current,,This value contains the number of XRRP packets transmitted by the virtual router (XRRP instance).
.1.3.6.1.4.1.11.2.14.11.5.1.18.3.12.1.3,HP-ICF-XRRP::hpicfXrrpStatsInstanceVersionErrPkts,Counter32,read-only,,current,,This value contains the number of XRRP packets received by the virtual router (XRRP instance) with incompatible  version value in either the XRRP or VRRP portion of the  header.
.1.3.6.1.4.1.11.2.14.11.5.1.18.3.12.1.4,HP-ICF-XRRP::hpicfXrrpStatsInstancePriorityZeroPktsRcvd,Counter32,read-only,,current,,This value contains the number of XRRP packets received  with the priority set to 0 on the virtual router (i.e.  the current master is giving up control).
.1.3.6.1.4.1.11.2.14.11.5.1.18.3.12.1.5,HP-ICF-XRRP::hpicfXrrpStatsInstancePriorityZeroPktsXmtd,Counter32,read-only,,current,,This value contains the number of XRRP packets  transmitted by the virtual router with the priority set  to 0 (i.e. the virtual router is giving up control).
.1.3.6.1.4.1.11.2.14.11.5.1.18.3.12.1.6,HP-ICF-XRRP::hpicfXrrpStatsInstanceMismatchedIpPkts,Counter32,read-only,,current,,This value contains the number of XRRP packets received  by the virtual router with an unknown mismatched IP  addresses. The Backup router will automatically accept  the addresses from a router with a priority of 255 (i.e.  the virtual router owner).
.1.3.6.1.4.1.11.2.14.11.5.1.18.3.12.1.7,HP-ICF-XRRP::hpicfXrrpStatsInstanceAuthFailPktsReject,Counter32,read-only,,current,,This value contains the number of rejected by this virtual router XRRP packets due to authentication failure (i.e.  mismatched passwords).
.1.3.6.1.4.1.11.2.14.11.5.1.18.3.12.1.8,HP-ICF-XRRP::hpicfXrrpStatsInstanceIntervalMismatchPkts,Counter32,read-only,,current,,This value contains the number of XRRP packets with  the advertisement interval is a mismatch. The receiving router will change to that of the transmitter but logs  a warning.
.1.3.6.1.4.1.11.2.14.11.5.1.18.3.12.1.9,HP-ICF-XRRP::hpicfXrrpStatsInstanceCreateTime,TimeTicks,read-only,,current,,The value of sysUpTime when this virtual router entry was last activated. This object allows to a  management station to detect deletion and recreation  cycles between polls and thus detect discontinuity  in the above statistics counters.
.1.3.6.1.4.1.11.2.14.11.5.1.18.3.13,HP-ICF-XRRP::hpicfXrrpStatsRcTable,,not-accessible,,current,,A table that contains statistics information for  virtual router coordinators in the domain.
.1.3.6.1.4.1.11.2.14.11.5.1.18.3.13.1,HP-ICF-XRRP::hpicfXrrpStatsRcEntry,,not-accessible,hpicfXrrpStatsRcRouterId,current,,Information about a specific router coordinator.
.1.3.6.1.4.1.11.2.14.11.5.1.18.3.13.1.1,HP-ICF-XRRP::hpicfXrrpStatsRcRouterId,Integer32,not-accessible,,current,,The router coordinator number.
.1.3.6.1.4.1.11.2.14.11.5.1.18.3.13.1.2,HP-ICF-XRRP::hpicfXrrpStatsRcOperState,INTEGER,read-only,,current,initialize(1):backup(2):master(3):failback(4),The current operational state of the router coordinator.
.1.3.6.1.4.1.11.2.14.11.5.1.18.3.13.1.3,HP-ICF-XRRP::hpicfXrrpStatsRcType1PktsRcvd,Counter32,read-only,,current,,This value contains the number of type 1 XRRP packets  received by the router.
.1.3.6.1.4.1.11.2.14.11.5.1.18.3.13.1.4,HP-ICF-XRRP::hpicfXrrpStatsRcType1PktsXmtd,Counter32,read-only,,current,,This value contains the number of type 1 XRRP packets  transmitted by the router.
.1.3.6.1.4.1.11.2.14.11.5.1.18.3.13.1.5,HP-ICF-XRRP::hpicfXrrpStatsRcType2PktsRcvd,Counter32,read-only,,current,,This value contains the number of type 2 XRRP packets  received by the router.
.1.3.6.1.4.1.11.2.14.11.5.1.18.3.13.1.6,HP-ICF-XRRP::hpicfXrrpStatsRcType2PktsXmtd,Counter32,read-only,,current,,This value contains the number of type 2 XRRP packets  transmitted by the router.
.1.3.6.1.4.1.11.2.14.11.5.1.18.3.13.1.7,HP-ICF-XRRP::hpicfXrrpStatsRcBecomeMaster,Counter32,read-only,,current,,The total number of times that this router has become a master.
.1.3.6.1.4.1.11.2.14.11.5.1.18.3.13.1.8,HP-ICF-XRRP::hpicfXrrpStatsRcMasterTime,TimeTicks,read-only,,current,,Duration as master (in seconds).
.1.3.6.1.4.1.11.2.14.11.5.1.18.3.13.1.9,HP-ICF-XRRP::hpicfXrrpStatsRcUnknownVlanId,Counter32,read-only,,current,,The number of packets received by this virtual router that do not map to a known VLAN ID where an XRRP instance is supported.
.1.3.6.1.4.1.11.2.14.11.5.1.18.3.13.1.10,HP-ICF-XRRP::hpicfXrrpStatsRcCreateTime,TimeTicks,read-only,,current,,The value of sysUpTime when this router coordinator entry was last activated. This object allows to a  management station to detect deletion and recreation  cycles between polls and thus detect discontinuity  in the above statistics counters.
.1.3.6.1.4.1.11.2.14.11.5.1.18.4,HP-ICF-XRRP::hpicfXrrpConformance,,,,,,
.1.3.6.1.4.1.11.2.14.11.5.1.18.4.1,HP-ICF-XRRP::hpicfXrrpMIBCompliances,,,,,,
.1.3.6.1.4.1.11.2.14.11.5.1.18.4.1.1,HP-ICF-XRRP::hpicfXrrpMIBCompliance,,,,,,********* THIS COMPLIANCE IS DEPRECATED *********
.1.3.6.1.4.1.11.2.14.11.5.1.18.4.1.2,HP-ICF-XRRP::hpicfXrrpMIBCompliance1,,,,,,The core compliance statement for XRRP implementation.
.1.3.6.1.4.1.11.2.14.11.5.1.18.4.1.3,HP-ICF-XRRP::hpicfXrrpMIBCompliance2,,,,,,The core compliance statement for XRRP implementation.
.1.3.6.1.4.1.11.2.14.11.5.1.18.4.2,HP-ICF-XRRP::hpicfXrrpMIBGroups,,,,,,
.1.3.6.1.4.1.11.2.14.11.5.1.18.4.2.1,HP-ICF-XRRP::hpicfXrrpOperGroup,,,,,,********* THIS GROUP IS DEPRECATED *********
.1.3.6.1.4.1.11.2.14.11.5.1.18.4.2.2,HP-ICF-XRRP::hpicfXrrpStatsGroup,,,,,,Conformance group for XRRP statistics.
.1.3.6.1.4.1.11.2.14.11.5.1.18.4.2.3,HP-ICF-XRRP::hpicfXrrpTrapGroup,,,,,,Conformance group for objects contained in XRRP  notifications.
.1.3.6.1.4.1.11.2.14.11.5.1.18.4.2.4,HP-ICF-XRRP::hpicfXrrpNotificationGroup,,,,,,The XRRP MIB Notification Group.
.1.3.6.1.4.1.11.2.14.11.5.1.18.4.2.5,HP-ICF-XRRP::hpicfXrrpOperGroup1,,,,,,Conformance group for XRRP operations.
.1.3.6.1.4.1.11.2.14.11.5.1.18.4.2.6,HP-ICF-XRRP::hpicfXrrpOperGroup2,,,,,,Conformance group for XRRP operations.
.1.3.6.1.4.1.11.2.14.11.5.1.19,HP-ICF-OID::hpicfUsrAuthMIB,,,,,,
.1.3.6.1.4.1.11.2.14.11.5.1.19.0,HP-USER-AUTH::hpicfUsrAuthNotifications,,,,,,
.1.3.6.1.4.1.11.2.14.11.5.1.19.0.1,HP-USER-AUTH::hpicfUsrAuthCLIAuthFail,,,,,,This notification signifies that CLI password authentication has failed. Operational control of this notification is provided using hpicfUsrAuthCliNotifyEnable. Agents complying with hpicfUsrAuthCompliance6 always additionally include hpicfUsrAuthLastLoginStatus. They may include hpicfUsrAuthLastLoginNotifyAddrType and hpicfUsrAuthLastLoginNotifyAddr to identify the source of the login attempt. They may also include an instance of hpicfUsrAuthLastLoginGeneration. The hpicfUsrAuthLastLoginEntry index in this object may be used to retrieve other objects in the row that identify the target user of this login attempt. If this index is zero, then the login attempt was to an unknown username. The value of hpicfUsrAuthLastLoginGeneration supplied in the notification should be compared to the retrieved object value to ensure that the row has not changed since the notification was sent.
.1.3.6.1.4.1.11.2.14.11.5.1.19.0.2,HP-USER-AUTH::hpicfUsrAuthPasswdChng,,,,,,An hpicfUsrAuthPasswdChng notification signifies that the manager password has been changed. The value of  hpicfUsrAuthCLIPasswdSet can be used to determine whether the password has been set or cleared by this action. 
.1.3.6.1.4.1.11.2.14.11.5.1.19.0.3,HP-USER-AUTH::hpicfPortSecAuthFailure,,,,,,This notification indicates a failed Port Security (network access) authentication event.
.1.3.6.1.4.1.11.2.14.11.5.1.19.1,HP-USER-AUTH::hpicfUsrAuthSystem,,,,,,
.1.3.6.1.4.1.11.2.14.11.5.1.19.1.1,HP-USER-AUTH::hpicfUsrAuthWebAuthDhcpBaseAddress,IpAddress,read-write,,current,,For all ports running with web authentication  enabled: Specifies the base address that should  be used by the switch DHCP server for web-based  authentication purposes.
.1.3.6.1.4.1.11.2.14.11.5.1.19.1.2,HP-USER-AUTH::hpicfUsrAuthWebAuthDhcpMask,IpAddress,read-write,,current,,For all ports running with web authentication enabled: Specifies the subnet mask to be used in  conjunction with the DHCP base address when  servicing DHCP requests.  Allowable mask range is 255.255.240.0 (20) to  255.255.255.0 (24).
.1.3.6.1.4.1.11.2.14.11.5.1.19.1.3,HP-USER-AUTH::hpicfUsrAuthWebAuthDhcpLease,Integer32,read-write,,current,,For all ports running with web authentication enabled: Specifies the DHCP lease length in  seconds.
.1.3.6.1.4.1.11.2.14.11.5.1.19.1.4,HP-USER-AUTH::hpicfUsrAuthMacAuthAddrFormat,INTEGER,read-write,,current,noDelimiter(1):singleDash(2):multiDash(3):multiColon(4):noDelimiterUppercase(5):singleDashUppercase(6):multiDashUppercase(7):multiColonUppercase(8),For all ports running with MAC authentication enabled: Specifies the MAC address format to use in the RADIUS access-request, as follows: 'noDelimiter' - Sends MAC address in aabbccddeeff format 'singleDash' - Sends MAC address in aabbcc-ddeeff format 'multiDash' - Sends MAC address in aa-bb-cc-dd-ee-ff format 'multiColon' - Sends MAC address in aa:bb:cc:dd:ee:ff format 'noDelimiterUppercase' - Sends MAC address in AABBCCDDEEFF format 'singleDashUppercase' - Sends MAC address in AABBCC-DDEEFF format 'multiDashUppercase' - Sends MAC address in AA-BB-CC-DD-EE-FF format 'multiColonUppercase' - Sends MAC address in AA:BB:CC:DD:EE:FF format The default value is noDelimiter(1).
.1.3.6.1.4.1.11.2.14.11.5.1.19.1.5,HP-USER-AUTH::hpicfUsrAuthCliNotifyEnable,INTEGER,read-write,,current,enabled(1):disabled(2),The operational status of hpicfUsrAuthCliAuthFail notifications. The default value is 1 (Enabled). A value of 2 represents Disabled. Writing this object requires authentication, such  as provided by SNMPv3. 
.1.3.6.1.4.1.11.2.14.11.5.1.19.1.6,HP-USER-AUTH::hpicfUsrAuthCLIInterface,INTEGER,accessible-for-notify,,current,serial(1):telnet(2):ssh(3):sshPublicKey(4):webui(5):portAccess(6):other(9),The physical interface, network protocol, or other authentication type that is associated with this notification.
.1.3.6.1.4.1.11.2.14.11.5.1.19.1.7,HP-USER-AUTH::hpicfUsrAuthCLIPasswdSet,INTEGER,accessible-for-notify,,current,true(1):false(2),Indicates whether the CLI manager password is set. 1 indicates True while 2 indicates False. 
.1.3.6.1.4.1.11.2.14.11.5.1.19.1.8,HP-USER-AUTH::hpicfUsrAuthCLIFailCnt,Integer32,accessible-for-notify,,current,,The count of hpicfUsrAuthPasswdFail notifications sent by the hpicfUsrAuth entity to the SNMP entity. The actual count of notifications sent by SNMP may be lower due to rate limiting or configuration.
.1.3.6.1.4.1.11.2.14.11.5.1.19.1.9,HP-USER-AUTH::hpicfUsrAuthCLIPwdNotifyCnt,Unsigned32,accessible-for-notify,,current,,A count of CLI password change notifications sent from the Auth entity to the SNMP entity within the switch. This count may therefore differ from the count of notifications actually sent by the SNMP entity due to switch configuration (e.g., the value of hpicfUsrAuthNotifyEnable.)
.1.3.6.1.4.1.11.2.14.11.5.1.19.1.10,HP-USER-AUTH::hpicfUsrAuthWMAFailCnt,Unsigned32,accessible-for-notify,,current,,The count of hpicfPortSecAuthFailure notifications sent by the hpicfUsrAuth entity to the SNMP entity. The actual count of notifications sent by SNMP may be lower due to rate limiting or configuration.
.1.3.6.1.4.1.11.2.14.11.5.1.19.1.11,HP-USER-AUTH::hpicfUsrAuthWMAFailMAC,OCTET,accessible-for-notify,,current,,The MAC address supplied in the failed authentication request.
.1.3.6.1.4.1.11.2.14.11.5.1.19.1.12,HP-USER-AUTH::hpicfUsrAuthWMAFailPort,Integer32,accessible-for-notify,,current,,The port index of the failed authentication request.
.1.3.6.1.4.1.11.2.14.11.5.1.19.1.13,HP-USER-AUTH::hpicfUsrAuthWMAFailVlan,Integer32,accessible-for-notify,,current,,The VLAN ID associated with the failed authentication request.
.1.3.6.1.4.1.11.2.14.11.5.1.19.1.14,HP-USER-AUTH::hpicfUsrAuthPortSecNotifyEnable,INTEGER,read-write,,current,enabled(1):disabled(2),Provides operational control of hpicfPortSecAuthFailure  notification. When enabled (1), the notification will be sent. When disabled (2), the notification will not  be sent. Setting this object requires authentication, such as provided by SNMPv3. 
.1.3.6.1.4.1.11.2.14.11.5.1.19.1.15,HP-USER-AUTH::hpicfUsrAuthPasswdNotifyEnable,INTEGER,read-write,,current,enabled(1):disabled(2),Provides operational control of hpicfUsrAuthPasswdChng notification.  When enabled (1), the notification will be sent.  When disabled (2), the notification will not be sent. Setting this object requires authentication, such as provided by SNMPv3.
.1.3.6.1.4.1.11.2.14.11.5.1.19.1.16,HP-USER-AUTH::hpicfUsrAuthWMAEWAServerTable,,not-accessible,,current,,A table of the Enhanced Web Auth servers.
.1.3.6.1.4.1.11.2.14.11.5.1.19.1.16.1,HP-USER-AUTH::hpicfUsrAuthWMAEWAServerEntry,,not-accessible,hpicfUsrAuthWMAeWAServerIndex,current,,Addresses for an Enhanced Web Auth server.
.1.3.6.1.4.1.11.2.14.11.5.1.19.1.16.1.1,HP-USER-AUTH::hpicfUsrAuthWMAeWAServerIndex,Integer32,not-accessible,,current,,Index into hpicfUsrAuthWMAEWAServerTable.
.1.3.6.1.4.1.11.2.14.11.5.1.19.1.16.1.2,HP-USER-AUTH::hpicfUsrAuthWMAeWAServerIPAddressType,INTEGER,read-create,,current,unknown(0):ipv4(1):ipv6(2):ipv4z(3):ipv6z(4):dns(16),The type of Enhanced Web Auth Server Address.
.1.3.6.1.4.1.11.2.14.11.5.1.19.1.16.1.3,HP-USER-AUTH::hpicfUsrAuthWMAeWAServerIPAddress,OCTET,read-create,,current,,The IP address of the Enhanced Web Auth Server. If set to 0.0.0.0 or URL not configured no Enhanced Web Auth Server will run.
.1.3.6.1.4.1.11.2.14.11.5.1.19.1.16.1.4,HP-USER-AUTH::hpicfUsrAuthWMAeWAServerPath,OCTET,read-create,,current,,The Enhanced Web Auth Server Path for the location of the Enhanced Web Auth Pages. If not configured  the default path will be used.
.1.3.6.1.4.1.11.2.14.11.5.1.19.1.16.1.5,HP-USER-AUTH::hpicfUsrAUthWMAeWAServerRowStatus,INTEGER,read-create,,current,active(1):notInService(2):notReady(3):createAndGo(4):createAndWait(5):destroy(6),This marks the row as active/inactive.
.1.3.6.1.4.1.11.2.14.11.5.1.19.1.17,HP-USER-AUTH::hpicfUsrAuthRedirectServerTable,,not-accessible,,current,,A table of the authentication Redirect Servers.
.1.3.6.1.4.1.11.2.14.11.5.1.19.1.17.1,HP-USER-AUTH::hpicfUsrAuthRedirectServerEntry,,not-accessible,hpicfUsrAuthRedirectServerIndex,current,,Attributes of an authentication Redirect Server.
.1.3.6.1.4.1.11.2.14.11.5.1.19.1.17.1.1,HP-USER-AUTH::hpicfUsrAuthRedirectServerIndex,Integer32,not-accessible,,current,,Index into hpicfUsrAuthRedirectServerTable.
.1.3.6.1.4.1.11.2.14.11.5.1.19.1.17.1.2,HP-USER-AUTH::hpicfUsrAuthRedirectServerURL,OCTET,read-create,,current,,This object represents the authentication  Redirect Server's complete URL for the location of the redirect server login or warning page. This  value must begin with 'http://' or 'https://' and should include the DNS name, TCP port of the server if not 80 or SSL's 443, and the page path, if necessary.
.1.3.6.1.4.1.11.2.14.11.5.1.19.1.17.1.3,HP-USER-AUTH::hpicfUsrAuthRedirectServerRowStatus,INTEGER,read-create,,current,active(1):notInService(2):notReady(3):createAndGo(4):createAndWait(5):destroy(6),This object indicates the status of this entry. Must NOT be active in order to modify some other  column of this config entry.
.1.3.6.1.4.1.11.2.14.11.5.1.19.1.18,HP-USER-AUTH::hpicfUsrAuthRedirectServerRestrictiveFilter,INTEGER,read-write,,current,enabled(1):disabled(2),If enabled, only the configured initial web page will be returned for all client requests. The enabled state would generally be used to simply display an informative warning message to failed macAuth clients. If disabled, all client/redirect-server http traffic will be permitted.
.1.3.6.1.4.1.11.2.14.11.5.1.19.1.19,HP-USER-AUTH::hpicfUsrAuthRedirectServerClientTimeout,Integer32,read-write,,current,,The time (in seconds) that a client will be left in the unauthorized authentication redirection state before  being removed from the state tables, temporarily  suspending further client/redirect-server http  traffic. After state table removal, client is  free to initiate authentication.
.1.3.6.1.4.1.11.2.14.11.5.1.19.1.20,HP-USER-AUTH::hpicfUsrAuthRedirectServerAuthFailureStats,Counter32,read-only,,current,,The total number of times clients fail authentication  and initiate the authentication Redirect Server process  since reboot. A single client can be counted multiple  times.
.1.3.6.1.4.1.11.2.14.11.5.1.19.1.21,HP-USER-AUTH::hpicfUsrAuthCacheCredTimeOut,Integer32,read-write,,current,,Specifies the time in seconds, that the switch should remove the credentials. Reauthentication should take place with in small amount of time.
.1.3.6.1.4.1.11.2.14.11.5.1.19.1.22,HP-USER-AUTH::hpicfUsrAuthClientReauthenticateTable,,not-accessible,,current,,A table containing configuration/control variables indexed by port and client MAC.
.1.3.6.1.4.1.11.2.14.11.5.1.19.1.22.1,HP-USER-AUTH::hpicfUsrAuthClientReauthenticateEntry,,not-accessible,hpicfUsrAuthClientReauthenticateInterfaceIndex:hpicfUsrAuthClientReauthenticateMacAddress,current,,The table entry provides the means by which a client on an authentication interface can be forced to reauthenticate.
.1.3.6.1.4.1.11.2.14.11.5.1.19.1.22.1.1,HP-USER-AUTH::hpicfUsrAuthClientReauthenticateInterfaceIndex,Integer32,not-accessible,,current,,Index of client interfaces.
.1.3.6.1.4.1.11.2.14.11.5.1.19.1.22.1.2,HP-USER-AUTH::hpicfUsrAuthClientReauthenticateMacAddress,OCTET,not-accessible,,current,,Specifies the MAC address of the client.
.1.3.6.1.4.1.11.2.14.11.5.1.19.1.22.1.3,HP-USER-AUTH::hpicfUsrAuthClientReauthenticate,INTEGER,read-write,,current,true(1):false(2),The reauthentication control for this client on this authentication interface. Setting this attribute TRUE forces this authenticated client to reauthenticate. That is, the client is deauthenticated and must transmit traffic in order to trigger reauthentication. Setting this attribute FALSE has no effect.
.1.3.6.1.4.1.11.2.14.11.5.1.19.1.23,HP-USER-AUTH::hpicfUsrAuthMacAuthPassword,OCTET,read-write,,current,,This object represents the secret password value used by all MAC auth clients. The default value of password is NULL. The password if set(non NULL) will be used instead of MAC address while constructing Radius request packet. The current maximum length of password is 16.
.1.3.6.1.4.1.11.2.14.11.5.1.19.1.24,HP-USER-AUTH::hpicfUsrAuthWebAuthAccessDeniedMode,INTEGER,read-write,,current,disabled(1):custom(2):radius(3),Specifies the access denied mode that applies to the custom message embedded into the login failure page. The values: disabled (1) - the feature is disabled. custom (2) - use the string configured by administrator via CLI or SNMP. radius (3) - use the string in the 'reply-message' attribute of the received RADIUS response message.
.1.3.6.1.4.1.11.2.14.11.5.1.19.1.25,HP-USER-AUTH::hpicfUsrAuthWebAuthAccessDeniedMessage,OCTET,read-write,,current,,Text of the access denied message that will be embedded into the custom web auth login failure page. This message will only be used when the access denied mode is set to 'custom'. It can take up to 250 characters
.1.3.6.1.4.1.11.2.14.11.5.1.19.1.26,HP-USER-AUTH::hpicfUsrAuthMacAuthUsrNumberCnt,Counter32,read-only,,current,,This object specifies the total number of authenticated clients currently present in the switch. This does not include the  clients which are under process of authentication.
.1.3.6.1.4.1.11.2.14.11.5.1.19.1.27,HP-USER-AUTH::hpicfUsrAuthLastLoginNotifyStatus,INTEGER,accessible-for-notify,,current,unknown(0):successful(1):failed(2):failedLockOut(3):lockedOut(4):tableFull(5),The status of the failed login attempt. successful(1) is not currently used. failed(2) indicates a regular failure that did not cause user lockout. failedLockOut(3) indicates a failure that caused user lockout. lockedOut(4) indicates that the user was locked out before the attempt was made. tableFull(5) indicates lockout due to a full lockout table, likely an indication of a serious attack.
.1.3.6.1.4.1.11.2.14.11.5.1.19.1.28,HP-USER-AUTH::hpicfUsrAuthLastLoginNotifyAddrType,INTEGER,accessible-for-notify,,current,unknown(0):ipv4(1):ipv6(2):ipv4z(3):ipv6z(4):dns(16),The type of IP address from which the user's most recent login attempt occurred. Unknown(0) indicates the console.
.1.3.6.1.4.1.11.2.14.11.5.1.19.1.29,HP-USER-AUTH::hpicfUsrAuthLastLoginNotifyAddr,OCTET,accessible-for-notify,,current,,The IP address from which the user's most recent login attempt occurred.
.1.3.6.1.4.1.11.2.14.11.5.1.19.1.30,HP-USER-AUTH::hpicfUsrAuthUseLLDPData,INTEGER,read-write,,current,true(1):false(2),Enable or disable LLDP data inclusion in client authentication, which, in addition to using the source MAC address of incoming packets, also uses client information in the LLDP payload to authenticate clients.
.1.3.6.1.4.1.11.2.14.11.5.1.19.1.31,HP-USER-AUTH::hpicfUsrAuthMacAuthPasswordEncrypted,OCTET,read-write,,current,,This object represents the encrypted format of password value stored in the object hpicfUsrAuthMacAuthPassword. This object may only be read or written when hpSwitchAuthenticationEncryptCredentialsMethod is set to a value other than none(0). This object should only be written with an encrypted key.
.1.3.6.1.4.1.11.2.14.11.5.1.19.2,HP-USER-AUTH::hpicfUsrAuthPorts,,,,,,
.1.3.6.1.4.1.11.2.14.11.5.1.19.2.1,HP-USER-AUTH::hpicfUsrAuthPortTable,,not-accessible,,current,,A table of system level information about Web- MAC-based authentication for each port in the  switch.
.1.3.6.1.4.1.11.2.14.11.5.1.19.2.1.1,HP-USER-AUTH::hpicfUsrAuthPortEntry,,not-accessible,hpicfUsrAuthPortNumber,current,,The port number, operational mode and  reauthentication control for each switch port.
.1.3.6.1.4.1.11.2.14.11.5.1.19.2.1.1.1,HP-USER-AUTH::hpicfUsrAuthPortNumber,Integer32,accessible-for-notify,,current,,The port number associated with this switch port.
.1.3.6.1.4.1.11.2.14.11.5.1.19.2.1.1.2,HP-USER-AUTH::hpicfUsrAuthWebAuthAdminStatus,INTEGER,read-write,,current,true(1):false(2),Setting this attribute TRUE enables web-based authentication services. A value of FALSE disabled web-based authentication. This attribute cannot be set TRUE concurrently with  hpicfUsrAuthMacAuthAdminStatus.
.1.3.6.1.4.1.11.2.14.11.5.1.19.2.1.1.3,HP-USER-AUTH::hpicfUsrAuthMacAuthAdminStatus,INTEGER,read-write,,current,true(1):false(2),Setting this attribute TRUE enables MAC-based authentication services. A value of FALSE disabled MAC-based authentication. This attribute cannot be set TRUE concurrently with  hpicfUsrAuthWebAuthAdminStatus.
.1.3.6.1.4.1.11.2.14.11.5.1.19.2.1.1.4,HP-USER-AUTH::hpicfUsrAuthPortReauthenticate,INTEGER,read-write,,current,true(1):false(2),The reauthentication control for this port. Setting this  attribute TRUE forces all authenticated clients to  reauthenticate themselves. Setting this attribute FALSE has no effect. This attribute always returns FALSE when read.
.1.3.6.1.4.1.11.2.14.11.5.1.19.2.1.1.5,HP-USER-AUTH::hpicfUsrAuthLMAAdminStatus,INTEGER,read-write,,current,true(1):false(2),Setting this attribute TRUE enables Local MAC-based authentication services. A value of FALSE disabled MAC-based authentication. This attribute cannot be set TRUE concurrently with hpicfUsrAuthWebAuthAdminStatus.
.1.3.6.1.4.1.11.2.14.11.5.1.19.2.1.1.6,HP-USER-AUTH::hpicfUsrAuthLLDPBypassAdminStatus,INTEGER,read-write,,current,true(1):false(2),Setting this attribute as TRUE enables lldp-bypass authentication. A value of FALSE disables lldp-bypass authentication. This attribute cannot be set to TRUE concurrently with MAC lockdown, MACsec, Trunk, Distributed Trunking and mesh port features. The lldp-bypass feature is limited only for Aruba-APs that send special LLDP TLVs.
.1.3.6.1.4.1.11.2.14.11.5.1.19.2.1.2,HP-USER-AUTH::hpicfUsrAuthOrderPortEntry,,not-accessible,hpicfUsrAuthPortNumber,current,,The port number, authentication order control for each switch port.
.1.3.6.1.4.1.11.2.14.11.5.1.19.2.1.2.1,HP-USER-AUTH::hpicfUsrAuthOrderFirst,INTEGER,read-write,,current,none(0):authenticator(1):mac-auth(2),This object specifies the first Authentication method to be used for the port.
.1.3.6.1.4.1.11.2.14.11.5.1.19.2.1.2.2,HP-USER-AUTH::hpicfUsrAuthOrderSecond,INTEGER,read-write,,current,none(0):authenticator(1):mac-auth(2),This object specifies the second Authentication method to be used for the port.
.1.3.6.1.4.1.11.2.14.11.5.1.19.2.1.2.3,HP-USER-AUTH::hpicfUsrAuthOrderLmaFallback,INTEGER,read-write,,current,true(1):false(2),This object specifies if Authentication order fallback is enabled for the port.
.1.3.6.1.4.1.11.2.14.11.5.1.19.2.1.2.4,HP-USER-AUTH::hpicfUsrAuthPriorityFirst,INTEGER,read-write,,current,none(0):authenticator(1):mac-auth(2),This object specifies the first priority of Authentication method for the port.
.1.3.6.1.4.1.11.2.14.11.5.1.19.2.1.2.5,HP-USER-AUTH::hpicfUsrAuthPrioritySecond,INTEGER,read-write,,current,none(0):authenticator(1):mac-auth(2),This object specifies the second priority of Authentication method for the port.
.1.3.6.1.4.1.11.2.14.11.5.1.19.2.2,HP-USER-AUTH::hpicfUsrAuthBypassPortTable,,not-accessible,,current,,A table of system level information about CDP and LLDP bypass authentication for each port in the switch.
.1.3.6.1.4.1.11.2.14.11.5.1.19.2.2.1,HP-USER-AUTH::hpicfUsrAuthBypassPortEntry,,not-accessible,hpicfUsrAuthPortNumber,current,,The entry for system level information about CDP and LLDP bypass authentication for each port in the switch.
.1.3.6.1.4.1.11.2.14.11.5.1.19.2.2.1.1,HP-USER-AUTH::hpicfUsrAuthBypassAdminStatus,INTEGER,read-write,,current,true(1):false(2),Setting this attribute as TRUE enables bypass authentication. A value of FALSE disables bypass authentication. This attribute is set only with hpicfUsrAuthDeviceIdentityName.
.1.3.6.1.4.1.11.2.14.11.5.1.19.2.2.1.2,HP-USER-AUTH::hpicfUsrAuthDeviceIdentityName,OCTET,read-write,,current,,This object represents the device identity name to enable bypass authentication.
.1.3.6.1.4.1.11.2.14.11.5.1.19.3,HP-USER-AUTH::hpicfUsrAuthWebAuthConfig,,,,,,
.1.3.6.1.4.1.11.2.14.11.5.1.19.3.1,HP-USER-AUTH::hpicfUsrAuthWebAuthConfigTable,,not-accessible,,current,,A table that contains the configuration objects for  Web-based Authentication associated with each port. An entry appears in this table for each port that may authenticate access to itself.
.1.3.6.1.4.1.11.2.14.11.5.1.19.3.1.1,HP-USER-AUTH::hpicfUsrAuthWebAuthConfigEntry,,not-accessible,hpicfUsrAuthPortNumber,current,,The configuration information for Web-based authentication.
.1.3.6.1.4.1.11.2.14.11.5.1.19.3.1.1.1,HP-USER-AUTH::hpicfUsrAuthWebAuthClientLimit,Integer32,read-write,,current,,The maximum number of authenticated clients to allow on  the port.
.1.3.6.1.4.1.11.2.14.11.5.1.19.3.1.1.2,HP-USER-AUTH::hpicfUsrAuthWebAuthClientMoves,INTEGER,read-write,,current,disabled(1):enabled(2),Specifies whether client may roam across ports under web authentication control. Setting this attribute  'enabled'allows authenticated clients to roam to other  ports under web authentication control (that also have  this attribute set to 'enabled') without requiring a  reauthentication.   Setting this attribute 'disabled' disallows authenticated clients from roaming to other ports (regardless of that  port's attribute value). The client has to reauthenticate, if it attempts to roam.
.1.3.6.1.4.1.11.2.14.11.5.1.19.3.1.1.3,HP-USER-AUTH::hpicfUsrAuthWebAuthSSLState,INTEGER,read-write,,current,disabled(1):enabled(2),Specifies whether web-based authentication should use an  SSL connection (i.e. https://) to switch to collect client  credentials. Note: A valid certificate must be configured on switch before SSL connections are enabled.
.1.3.6.1.4.1.11.2.14.11.5.1.19.3.1.1.4,HP-USER-AUTH::hpicfUsrAuthWebAuthRedirectUrl,OCTET,read-write,,current,,Specifies the URL, to which an authenticated client should be redirected, after successful authentication.
.1.3.6.1.4.1.11.2.14.11.5.1.19.3.1.1.5,HP-USER-AUTH::hpicfUsrAuthWebAuthQuietPeriod,Integer32,read-write,,current,,Specifies the time, in seconds, that the switch should  refrain from reattempting an authentication request for a client whose credentials were rejected.
.1.3.6.1.4.1.11.2.14.11.5.1.19.3.1.1.6,HP-USER-AUTH::hpicfUsrAuthWebAuthServerTimeout,Integer32,read-write,,current,,Specifies the time, in seconds, that the switch should  wait for an authentication reply to return before  considering it as timed out.
.1.3.6.1.4.1.11.2.14.11.5.1.19.3.1.1.7,HP-USER-AUTH::hpicfUsrAuthWebAuthServerMaxReq,Integer32,read-write,,current,,Specifies the number of authentication requests that  must time out before failing authentication.
.1.3.6.1.4.1.11.2.14.11.5.1.19.3.1.1.8,HP-USER-AUTH::hpicfUsrAuthWebAuthMaxRetries,Integer32,read-write,,current,,Specifies the number of authentication requests that must fail (i.e. invalid credentials) before failing  authentication.
.1.3.6.1.4.1.11.2.14.11.5.1.19.3.1.1.9,HP-USER-AUTH::hpicfUsrAuthWebAuthLogoffPeriod,Integer32,read-write,,current,,Specifies the period, in seconds, at which an  authenticated client will be considered unauthenticated for a lack of activity (i.e. traffic originating  from client).
.1.3.6.1.4.1.11.2.14.11.5.1.19.3.1.1.10,HP-USER-AUTH::hpicfUsrAuthWebAuthReAuthPeriod,Integer32,read-write,,current,,Specifies the period, in seconds, at which an  authenticated client must reauthenticate. A value of  0 signifies that an authenticated client will never have  to reauthenticate. When hpSwitchAutzUserRoleEnabled is  true, this value will be superseded by the value of hpSwitchAutzUserRoleReauthPeriod from the client's assigned role.
.1.3.6.1.4.1.11.2.14.11.5.1.19.3.1.1.11,HP-USER-AUTH::hpicfUsrAuthWebAuthAuthVid,Unsigned32,read-write,,current,,Specifies the port VID (PVID) that should be used for  an authenticated client. When hpSwitchAutzUserRoleEnabled is  true, this value may be superseded by the value of hpSwitchAutzUserRoleVlanId or hpSwitchAutzUserRoleVlanName from the client's assigned role.
.1.3.6.1.4.1.11.2.14.11.5.1.19.3.1.1.12,HP-USER-AUTH::hpicfUsrAuthWebAuthUnauthVid,Unsigned32,read-write,,current,,Specifies the port VID (PVID) that should be used for  an unauthenticated client. When hpSwitchAutzUserRoleEnabled is  true, this value may be superseded by the value of hpSwitchAutzUserRoleVlanId or hpSwitchAutzUserRoleVlanName from the role identified by hpSwitchAutzUserRoleInitialRoleName.
.1.3.6.1.4.1.11.2.14.11.5.1.19.3.1.1.13,HP-USER-AUTH::hpicfUsrAuthWebAuthCacheCredentials,INTEGER,read-write,,current,disabled(1):enabled(2),Specifies whether to cache client credentials or not. Setting this variable 'enabled' allows to cache authenticated clients credentials. Setting this variable 'disabled' disallows to cache authenticated clients credentials.
.1.3.6.1.4.1.11.2.14.11.5.1.19.3.1.1.14,HP-USER-AUTH::hpicfUsrAuthWebAuthCachedReauthPeriod,Unsigned32,read-write,,current,,The value indicates the period in seconds, during which cached reauthentication is allowed on the port. If value is zero then the period of cached reauthentication is unlimited.
.1.3.6.1.4.1.11.2.14.11.5.1.19.3.2,HP-USER-AUTH::hpicfUsrAuthWebAuthClientReauthenticateTable,,not-accessible,,current,,A table containing WebAuth configuration/control variables indexed by port and client MAC.
.1.3.6.1.4.1.11.2.14.11.5.1.19.3.2.1,HP-USER-AUTH::hpicfUsrAuthWebAuthClientReauthenticateEntry,,not-accessible,hpicfUsrAuthWebAuthClientReauthenticateInterfaceIndex:hpicfUsrAuthWebAuthClientReauthenticateMacAddress,current,,The table entry provides the means by which a WebAuth client on an authentication interface can be forced to reauthenticate.
.1.3.6.1.4.1.11.2.14.11.5.1.19.3.2.1.1,HP-USER-AUTH::hpicfUsrAuthWebAuthClientReauthenticateInterfaceIndex,Integer32,not-accessible,,current,,Index of WebAuth client interfaces.
.1.3.6.1.4.1.11.2.14.11.5.1.19.3.2.1.2,HP-USER-AUTH::hpicfUsrAuthWebAuthClientReauthenticateMacAddress,OCTET,not-accessible,,current,,Specifies the MAC address of the client.
.1.3.6.1.4.1.11.2.14.11.5.1.19.3.2.1.3,HP-USER-AUTH::hpicfUsrAuthWebAuthClientReauthenticate,INTEGER,read-write,,current,true(1):false(2),The reauthentication control for this client on this authentication interface. Setting this attribute TRUE forces this authenticated WebAuth client to reauthenticate. That is, the client is deauthenticated and must transmit traffic in order to trigger reauthentication. Setting this attribute FALSE has no effect.
.1.3.6.1.4.1.11.2.14.11.5.1.19.4,HP-USER-AUTH::hpicfUsrAuthMacAuthConfig,,,,,,
.1.3.6.1.4.1.11.2.14.11.5.1.19.4.1,HP-USER-AUTH::hpicfUsrAuthMacAuthConfigTable,,not-accessible,,current,,A table that contains the configuration objects for  Mac-based Authentication associated with each port. An entry appears in this table for each port that may authenticate access to itself.
.1.3.6.1.4.1.11.2.14.11.5.1.19.4.1.1,HP-USER-AUTH::hpicfUsrAuthMacAuthConfigEntry,,not-accessible,hpicfUsrAuthPortNumber,current,,The configuration information for Mac-based authentication.
.1.3.6.1.4.1.11.2.14.11.5.1.19.4.1.1.1,HP-USER-AUTH::hpicfUsrAuthMacAuthClientLimit,Integer32,read-write,,current,,The maximum number of authenticated clients to allow on  the port.
.1.3.6.1.4.1.11.2.14.11.5.1.19.4.1.1.2,HP-USER-AUTH::hpicfUsrAuthMacAuthClientMoves,INTEGER,read-write,,current,disabled(1):enabled(2),Specifies whether client may roam across ports under web authentication control. Setting this attribute  'enabled'allows authenticated clients to roam to other  ports under web authentication control (that also have  this attribute set to 'enabled') without requiring a  reauthentication.   Setting this attribute 'disabled' disallows authenticated clients from roaming to other ports (regardless of that  port's attribute value). The client has to reauthenticate, if it attempts to roam.
.1.3.6.1.4.1.11.2.14.11.5.1.19.4.1.1.3,HP-USER-AUTH::hpicfUsrAuthMacAuthQuietPeriod,Integer32,read-write,,current,,Specifies the time, in seconds, that the switch should  refrain from reattempting an authentication request for a client whose credentials were rejected.
.1.3.6.1.4.1.11.2.14.11.5.1.19.4.1.1.4,HP-USER-AUTH::hpicfUsrAuthMacAuthServerTimeout,Integer32,read-write,,current,,Specifies the time, in seconds, that the switch should  wait for an authentication reply to return before  considering it as timed out.
.1.3.6.1.4.1.11.2.14.11.5.1.19.4.1.1.5,HP-USER-AUTH::hpicfUsrAuthMacAuthServerMaxReq,Integer32,read-write,,current,,Specifies the number of authentication requests that  must time out before failing authentication.
.1.3.6.1.4.1.11.2.14.11.5.1.19.4.1.1.6,HP-USER-AUTH::hpicfUsrAuthMacAuthLogoffPeriod,Integer32,read-write,,current,,Specifies the period, in seconds, at which an  authenticated client will be considered unauthenticated for a lack of activity (i.e. traffic originating  from client).
.1.3.6.1.4.1.11.2.14.11.5.1.19.4.1.1.7,HP-USER-AUTH::hpicfUsrAuthMacAuthReAuthPeriod,Integer32,read-write,,current,,Specifies the period, in seconds, at which an  authenticated client must reauthenticate. A value of  0 signifies that an authenticated client will never have  to reauthenticate. When hpSwitchAutzUserRoleEnabled is true, this value will be superseded by the value of hpSwitchAutzUserRoleReauthPeriod from the client's assigned role.
.1.3.6.1.4.1.11.2.14.11.5.1.19.4.1.1.8,HP-USER-AUTH::hpicfUsrAuthMacAuthAuthVid,Unsigned32,read-write,,current,,Specifies the port VID (PVID) that should be used for  an authenticated client. When hpSwitchAutzUserRoleEnabled is true, this value may be superseded by the value of hpSwitchAutzUserRoleVlanId or hpSwitchAutzUserRoleVlanName from the client's assigned role.
.1.3.6.1.4.1.11.2.14.11.5.1.19.4.1.1.9,HP-USER-AUTH::hpicfUsrAuthMacAuthUnauthVid,Unsigned32,read-write,,current,,Specifies the port VID (PVID) that should be used for  an unauthenticated client. When hpSwitchAutzUserRoleEnabled is true, this value may be superseded by the value of hpSwitchAutzUserRoleVlanId or hpSwitchAutzUserRoleVlanName from the role identified by hpSwitchAutzUserRoleInitialRoleName.
.1.3.6.1.4.1.11.2.14.11.5.1.19.4.1.1.10,HP-USER-AUTH::hpicfUsrAuthMacAuthCachedReauthPeriod,Unsigned32,read-write,,current,,The value indicates the period in seconds, during which cached reauthentication is allowed on the port. If value is zero then the period of cached reauthentication is unlimited.
.1.3.6.1.4.1.11.2.14.11.5.1.19.4.1.1.11,HP-USER-AUTH::hpicfUsrAuthMacAuthUnAuthPeriod,Integer32,read-write,,current,,Specifies the period, in seconds, at which an authenticated client must reauthenticate. A value of 0 signifies that an authenticated client will never have to reauthenticate.
.1.3.6.1.4.1.11.2.14.11.5.1.19.4.1.1.12,HP-USER-AUTH::hpicfUsrAuthMacAuthMode,INTEGER,read-only,,current,userBased(1):portBased(2),This object provides information about the authentication mode of a specific port performing MAC authentication. In 'userBased' mode, the port performing MAC authentication will authenticate every client coming in the port; the port will change into  'portBased' mode when a client is authenticated on the port and  is authorized to open its connecting switch port to all other  clients (i.e., its client account on the RADIUS server is  configured with VSA 'HP-Port-Auth-Mode-MA'). A port in portBased MAC authentication mode will grant access for any client coming in the port.
.1.3.6.1.4.1.11.2.14.11.5.1.19.4.1.1.13,HP-USER-AUTH::hpicfUsrAuthMacPin,INTEGER,read-write,,current,true(1):false(2),Enables MAC-Pinning on this port. Setting this attribute TRUE pins the authenticated MAC  addresses to the Mac address table.  Authenticated clients will not be  de-authenticated even when clients are inactive  throughout the logoff period.
.1.3.6.1.4.1.11.2.14.11.5.1.19.4.1.1.14,HP-USER-AUTH::hpicfMacAuthRetainUnauthClients,INTEGER,read-write,,current,true(1):false(2),Setting this attribute TRUE(1) allows access to Mac-based unauthorized clients by placing the port in unauthorized VLAN during reauthentication.
.1.3.6.1.4.1.11.2.14.11.5.1.19.4.1.1.15,HP-USER-AUTH::hpicfMacAuthRadiusServer,OCTET,read-write,,current,,This holds the configuration of per port RADIUS server  group for MAC based authentication.
.1.3.6.1.4.1.11.2.14.11.5.1.19.4.1.1.16,HP-USER-AUTH::hpicfUsrAuthMacAuthUnauthVidLLDPNwkPolicy,INTEGER,read-write,,current,true(1):false(2),Setting this attribute TRUE(1) will suppress the transmission of LLDP Network Policy TLV from port when an unauthorized client is placed in unauth VLAN during MAC authentication.
.1.3.6.1.4.1.11.2.14.11.5.1.19.4.2,HP-USER-AUTH::hpicfUsrAuthMacAuthClientReauthenticateTable,,not-accessible,,current,,A table containing macAuth configuration/control variables indexed by port and client MAC.
.1.3.6.1.4.1.11.2.14.11.5.1.19.4.2.1,HP-USER-AUTH::hpicfUsrAuthMacAuthClientReauthenticateEntry,,not-accessible,hpicfUsrAuthMacAuthClientReauthenticateInterfaceIndex:hpicfUsrAuthMacAuthClientReauthenticateMacAddress,current,,The table entry provides the means by which a macAuth  client on an authentication interface can be forced to  reauthenticate.
.1.3.6.1.4.1.11.2.14.11.5.1.19.4.2.1.1,HP-USER-AUTH::hpicfUsrAuthMacAuthClientReauthenticateInterfaceIndex,Integer32,not-accessible,,current,,Index of macAuth client interfaces.
.1.3.6.1.4.1.11.2.14.11.5.1.19.4.2.1.2,HP-USER-AUTH::hpicfUsrAuthMacAuthClientReauthenticateMacAddress,OCTET,not-accessible,,current,,Specifies the MAC address of the client.
.1.3.6.1.4.1.11.2.14.11.5.1.19.4.2.1.3,HP-USER-AUTH::hpicfUsrAuthMacAuthClientReauthenticate,INTEGER,read-write,,current,true(1):false(2),The reauthentication control for this client on this  authentication interface. Setting this attribute TRUE  forces this authenticated macAuth client to  reauthenticate. That is, the client is deauthenticated  and must transmit traffic in order to trigger  reauthentication. Setting this attribute FALSE has no  effect.
.1.3.6.1.4.1.11.2.14.11.5.1.19.5,HP-USER-AUTH::hpicfUsrAuthWebAuthStats,,,,,,
.1.3.6.1.4.1.11.2.14.11.5.1.19.5.1,HP-USER-AUTH::hpicfUsrAuthWebAuthSessionStatsTable,,not-accessible,,current,,A table that contains session statistic objects for each client (i.e. user) attempting to  authenticate to a port with Web-authentication  enabled. An entry appears in this table for each  port in the switch.
.1.3.6.1.4.1.11.2.14.11.5.1.19.5.1.1,HP-USER-AUTH::hpicfUsrAuthWebAuthSessionStatsEntry,,not-accessible,hpicfUsrAuthPortNumber:hpicfUsrAuthWebAuthSessionMacAddr,current,,The session statistics information for a port with Web-based authentication enabled. This shows the current values being collected for active sessions.
.1.3.6.1.4.1.11.2.14.11.5.1.19.5.1.1.1,HP-USER-AUTH::hpicfUsrAuthWebAuthSessionMacAddr,OCTET,read-only,,current,,Specifies the MAC address of the client.
.1.3.6.1.4.1.11.2.14.11.5.1.19.5.1.1.2,HP-USER-AUTH::hpicfUsrAuthWebAuthSessionName,OCTET,read-only,,current,,Specifies the username of the client.
.1.3.6.1.4.1.11.2.14.11.5.1.19.5.1.1.3,HP-USER-AUTH::hpicfUsrAuthWebAuthSessionState,INTEGER,read-only,,current,authenticated(1):unauthenticated(2):authenticating(3):authReqRejectNoVlan(4):authReqRejectUnauthVlan(5):authReqTimeoutNoVlan(6):authReqTimeoutUnauthVlan(7):initialRole(8):initialRoleFailed(9):criticalAuth(10):openAuth(11),Specifies the state of the client as follows: 'authenticated' - authenticated client 'unauthenticated' - unauthenticated client,  waiting for credentials 'authenticating' - credentials have been sent for verification, waiting for response 'authReqRejectNoVlan' - credentials invalid; client does not have access to  unauthenticated VLAN 'authReqRejectUnauthVlan' - credentials invalid; client does have access to  unauthenticated VLAN 'authReqTimeoutNoVlan' - credentials could not be  verified; client is still  unauthenticated and does  not have access to  unauthenticated VLAN 'authReqTimeoutUnauthVlan' - credentials could not be  verified; client is still  unauthenticated, but has  access to unauthenticated VLAN 'initialRole' - client is assigned the initial role 'initialRoleFailed' - initial role could not be applied; client does not have access to the network 'criticalAuth - client is authenticated on critical VLAN 'openAUth - client is authenticated on open auth VLAN
.1.3.6.1.4.1.11.2.14.11.5.1.19.5.1.1.4,HP-USER-AUTH::hpicfUsrAuthWebAuthSessionStateTime,Unsigned32,read-only,,current,,The duration, in seconds, a client has spent in the state specified by hpicfUsrAuthSessionState.
.1.3.6.1.4.1.11.2.14.11.5.1.19.5.1.1.5,HP-USER-AUTH::hpicfUsrAuthWebAuthSessionAuthVid,Unsigned32,read-only,,current,,Specifies the PVID that the authenticated client is utilizing. If client is unauthenticated, this object  has no meaning.
.1.3.6.1.4.1.11.2.14.11.5.1.19.5.1.1.6,HP-USER-AUTH::hpicfUsrAuthWebAuthSessionUnauthVid,Unsigned32,read-only,,current,,Specifies the PVID that the unauthenticated client is utilizing. If client is authenticated, this object  has no meaning.
.1.3.6.1.4.1.11.2.14.11.5.1.19.5.1.1.7,HP-USER-AUTH::hpicfUsrAuthWebAuthSessionTimeout,Unsigned32,read-only,,current,,Specifies the RADIUS Server set session timeout for reauthentication of the user. When ST = 0, user gets reauthenticated at reauth-period secs, ST < 60 it is set to 60 secs and then user is reauthenticated, ST > 60 user is reauthenticated at ST secs.
.1.3.6.1.4.1.11.2.14.11.5.1.19.5.1.1.8,HP-USER-AUTH::hpicfUsrAuthWebAuthSessionRole,OCTET,read-only,,current,,When hpSwitchAutzUserRoleEnabled is true, specifies the user role of the client.
.1.3.6.1.4.1.11.2.14.11.5.1.19.6,HP-USER-AUTH::hpicfUsrAuthMacAuthStats,,,,,,
.1.3.6.1.4.1.11.2.14.11.5.1.19.6.1,HP-USER-AUTH::hpicfUsrAuthMacAuthSessionStatsTable,,not-accessible,,current,,A table that contains session statistic objects for each client (i.e. user) attempting to  authenticate to a port with MAC-authentication  enabled. An entry appears in this table for each  port in the switch.
.1.3.6.1.4.1.11.2.14.11.5.1.19.6.1.1,HP-USER-AUTH::hpicfUsrAuthMacAuthSessionStatsEntry,,not-accessible,hpicfUsrAuthPortNumber:hpicfUsrAuthMacAuthSessionMacAddr,current,,The session statistics information for a port with Mac-based authentication enabled. This shows the current values being collected for active sessions.
.1.3.6.1.4.1.11.2.14.11.5.1.19.6.1.1.1,HP-USER-AUTH::hpicfUsrAuthMacAuthSessionMacAddr,OCTET,read-only,,current,,Specifies the MAC address of the client.
.1.3.6.1.4.1.11.2.14.11.5.1.19.6.1.1.2,HP-USER-AUTH::hpicfUsrAuthMacAuthSessionState,INTEGER,read-only,,current,authenticated(1):unauthenticated(2):authenticating(3):authReqRejectNoVlan(4):authReqRejectUnauthVlan(5):authReqTimeoutNoVlan(6):authReqTimeoutUnauthVlan(7):initialRole(8):initialRoleFailed(9):criticalAuth(10):openAuth(11),Specifies the state of the client as follows: 'authenticated' - authenticated client 'unauthenticated' - unauthenticated client,  waiting for credentials 'authenticating' - credentials have been sent for verification, waiting for response 'authReqRejectNoVlan' - credentials invalid; client does not have access to  unauthenticated VLAN 'authReqRejectUnauthVlan - credentials invalid; client does have access to  unauthenticated VLAN 'authReqTimeoutNoVlan' - credentials could not be  verified; client is still  unauthenticated and does  not have access to  unauthenticated VLAN 'authReqTimeoutUnauthVlan' - credentials could not be  verified; client is still  unauthenticated, but has  access to unauthenticated VLAN 'initialRole' - client is assigned the initial role 'initialRoleFailed' - initial role could not be applied; client does not have access to the network 'criticalAuth - client is authenticated on critical VLAN 'openAUth - client is authenticated on open auth VLAN
.1.3.6.1.4.1.11.2.14.11.5.1.19.6.1.1.3,HP-USER-AUTH::hpicfUsrAuthMacAuthSessionStateTime,Unsigned32,read-only,,current,,The duration, in seconds, a client has spent in the state specified by hpicfUsrAuthSessionState.
.1.3.6.1.4.1.11.2.14.11.5.1.19.6.1.1.4,HP-USER-AUTH::hpicfUsrAuthMacAuthSessionAuthVid,Unsigned32,read-only,,current,,Specifies the PVID that the authenticated client is utilizing. If client is unauthenticated, this object  has no meaning.
.1.3.6.1.4.1.11.2.14.11.5.1.19.6.1.1.5,HP-USER-AUTH::hpicfUsrAuthMacAuthSessionUnauthVid,Unsigned32,read-only,,current,,Specifies the PVID that the unauthenticated client is utilizing. If client is authenticated, this object  has no meaning.
.1.3.6.1.4.1.11.2.14.11.5.1.19.6.1.1.6,HP-USER-AUTH::hpicfUsrAuthMacAuthSessionTimeout,Unsigned32,read-only,,current,,Specifies the RADIUS Server set session timeout for reauthentication of the user. When ST = 0, user gets reauthenticated at reauth-period secs, ST < 60 it is set to 60 secs and then user is reauthenticated, ST > 60 user is reauthenticated at ST secs.
.1.3.6.1.4.1.11.2.14.11.5.1.19.6.1.1.7,HP-USER-AUTH::hpicfUsrAuthMacAuthSessionUsrNumberCnt,Counter32,read-only,,current,,This object Specifies the number of authenticated client  currently present on this port. This does not include the  clients which are under process of authentication.
.1.3.6.1.4.1.11.2.14.11.5.1.19.6.1.1.8,HP-USER-AUTH::hpicfUsrAuthMacAuthSessionName,OCTET,read-only,,current,,Specifies the username of the client.
.1.3.6.1.4.1.11.2.14.11.5.1.19.6.1.1.9,HP-USER-AUTH::hpicfUsrAuthMacAuthSessionRole,OCTET,read-only,,current,,When hpSwitchAutzUserRoleEnabled is true, specifies the user role of the client.
.1.3.6.1.4.1.11.2.14.11.5.1.19.7,HP-USER-AUTH::hpicfUsrAuthConformance,,,,,,
.1.3.6.1.4.1.11.2.14.11.5.1.19.7.2,HP-USER-AUTH::hpicfUsrAuthGroups,,,,,,
.1.3.6.1.4.1.11.2.14.11.5.1.19.7.2.1,HP-USER-AUTH::hpicfUsrAuthSystemGroup,,,,,,A collection of objects providing system  information about, and control over, Web- and  MAC-based authentication.
.1.3.6.1.4.1.11.2.14.11.5.1.19.7.2.2,HP-USER-AUTH::hpicfUsrAuthPortsGroup,,,,,,A collection of objects providing system level information about Web and MAC based authentication for each port in the switch.
.1.3.6.1.4.1.11.2.14.11.5.1.19.7.2.3,HP-USER-AUTH::hpicfUsrAuthWebAuthConfigGroup,,,,,,A collection of objects providing configuration objects for Web-based authentication associated with  each port.
.1.3.6.1.4.1.11.2.14.11.5.1.19.7.2.4,HP-USER-AUTH::hpicfUsrAuthMacAuthConfigGroup,,,,,,A collection of objects providing configuration objects for MAC-based authentication associated with  each port.
.1.3.6.1.4.1.11.2.14.11.5.1.19.7.2.5,HP-USER-AUTH::hpicfUsrAuthWebAuthSessionStatsGroup,,,,,,A collection of objects providing statistics about  current sessions for Web-based authentication.
.1.3.6.1.4.1.11.2.14.11.5.1.19.7.2.6,HP-USER-AUTH::hpicfUsrAuthMacAuthSessionStatsGroup,,,,,,A collection of objects providing statistics about  current sessions for MAC-based authentication.
.1.3.6.1.4.1.11.2.14.11.5.1.19.7.2.7,HP-USER-AUTH::hpicfUsrAuthWebAuthConfigGroup1,,,,,,A collection of objects providing configuration objects for Web-based authentication associated with  each port.
.1.3.6.1.4.1.11.2.14.11.5.1.19.7.2.8,HP-USER-AUTH::hpicfUsrAuthMacAuthConfigGroup1,,,,,,A collection of objects providing configuration objects for MAC-based authentication associated with  each port.
.1.3.6.1.4.1.11.2.14.11.5.1.19.7.2.9,HP-USER-AUTH::hpicfUsrAuthMacAuthConfigGroup2,,,,,,A collection of objects providing configuration objects for MAC-based authentication associated with each port.
.1.3.6.1.4.1.11.2.14.11.5.1.19.7.2.10,HP-USER-AUTH::hpicfUsrAuthRedirectServerGroup,,,,,,A collection of objects for authentication  Redirect Server.
.1.3.6.1.4.1.11.2.14.11.5.1.19.7.2.11,HP-USER-AUTH::hpicfUsrAuthWMAeWAServerGroup,,,,,,A collection of objects for Enhanced  Web Auth servers.
.1.3.6.1.4.1.11.2.14.11.5.1.19.7.2.12,HP-USER-AUTH::hpicfUsrAuthClientReauthenticateGroup,,,,,,A collection of objects for Reauthentication  settings .
.1.3.6.1.4.1.11.2.14.11.5.1.19.7.2.13,HP-USER-AUTH::hpicfUsrAuthMacAuthSessionStatsGroup1,,,,,,A collection of objects providing RADIUS server set session timeout for MAC-based user reauthentication.
.1.3.6.1.4.1.11.2.14.11.5.1.19.7.2.14,HP-USER-AUTH::hpicfUsrAuthWebAuthSessionStatsGroup1,,,,,,A collection of objects providing RADIUS server set session timeout for Web-based user reauthentication.
.1.3.6.1.4.1.11.2.14.11.5.1.19.7.2.15,HP-USER-AUTH::hpicfUsrAuthLastLoginGroup,,,,,,A collection of objects for viewing the most recent logins to the switch by users, and for deleting the table.
.1.3.6.1.4.1.11.2.14.11.5.1.19.7.2.16,HP-USER-AUTH::hpicfUsrAuthPortsGroup1,,,,,,A collection of objects providing system level information about Web and MAC based authentication for each port in the switch.
.1.3.6.1.4.1.11.2.14.11.5.1.19.7.2.17,HP-USER-AUTH::hpicfUsrAuthCaptivePortalGroup,,,,,,A collection of objects providing configuration for the captive portal feature.
.1.3.6.1.4.1.11.2.14.11.5.1.19.7.2.18,HP-USER-AUTH::hpicfUsrAuthCaptivePortalProfileGroup,,,,,,A collection of objects providing configuration for captive portal profiles.
.1.3.6.1.4.1.11.2.14.11.5.1.19.7.2.19,HP-USER-AUTH::hpicfUsrAuthWebAuthSessionStatsGroup2,,,,,,A collection of objects providing statistics about  current sessions for Web-based authentication.
.1.3.6.1.4.1.11.2.14.11.5.1.19.7.2.20,HP-USER-AUTH::hpicfUsrAuthMacAuthSessionStatsGroup2,,,,,,A collection of objects providing statistics about  current sessions for MAC-based authentication.
.1.3.6.1.4.1.11.2.14.11.5.1.19.7.2.21,HP-USER-AUTH::hpicfUsrAuthPortsGroup2,,,,,,A collection of objects providing system level information about Web and MAC based authentication for each port in the switch.
.1.3.6.1.4.1.11.2.14.11.5.1.19.7.2.22,HP-USER-AUTH::hpicfUsrAuthMacAuthConfigGroup3,,,,,,A collection of objects providing configuration objects for MAC-based authentication associated with each port.
.1.3.6.1.4.1.11.2.14.11.5.1.19.7.2.23,HP-USER-AUTH::hpicfUsrAuthPortsGroup3,,,,,,A collection of objects providing system level information about Web and MAC based authentication for each port in the switch.
.1.3.6.1.4.1.11.2.14.11.5.1.19.7.2.24,HP-USER-AUTH::hpicfUsrAuthMacAuthConfigGroup4,,,,,,A collection of objects providing configuration objects for MAC-based authentication associated with each port.
.1.3.6.1.4.1.11.2.14.11.5.1.19.7.2.25,HP-USER-AUTH::hpicfUsrAuthBypassPortsGroup,,,,,,A collection of objects providing system level information about LLDP and CDP bypass authentication for each port in the switch.
.1.3.6.1.4.1.11.2.14.11.5.1.19.7.2.26,HP-USER-AUTH::hpicfUsrAuthOrderPortsGroup,,,,,,A collection of objects providing configuration support for Authentication order and Priority on Port.
.1.3.6.1.4.1.11.2.14.11.5.1.19.7.2.27,HP-USER-AUTH::hpicfUsrAuthMacAuthConfigGroup5,,,,,,A collection of objects providing configuration objects for MAC-based authentication associated with each port.
.1.3.6.1.4.1.11.2.14.11.5.1.19.7.4,HP-USER-AUTH::hpicfUsrAuthCompliances,,,,,,
.1.3.6.1.4.1.11.2.14.11.5.1.19.7.4.1,HP-USER-AUTH::hpicfUsrAuthCompliance,,,,,,********* THIS COMPLIANCE IS DEPRECATED ********* The compliance statement for devices support of HP-USER-AUTH MIB.
.1.3.6.1.4.1.11.2.14.11.5.1.19.7.4.2,HP-USER-AUTH::hpicfUsrAuthCompliance1,,,,,,The compliance statement for devices support of HP-USER-AUTH MIB.
.1.3.6.1.4.1.11.2.14.11.5.1.19.7.4.3,HP-USER-AUTH::hpicfUsrAuthCompliance2,,,,,,The compliance statement for devices support of HP-USER-AUTH MIB.
.1.3.6.1.4.1.11.2.14.11.5.1.19.7.4.4,HP-USER-AUTH::hpicfUsrAuthCompliance3,,,,,,The compliance statement for devices support of HP-USER-AUTH MIB.
.1.3.6.1.4.1.11.2.14.11.5.1.19.7.4.5,HP-USER-AUTH::hpicfUsrAuthCompliance4,,,,,,The compliance statement for devices support of HP-USER-AUTH MIB.
.1.3.6.1.4.1.11.2.14.11.5.1.19.7.4.6,HP-USER-AUTH::hpicfUsrAuthCompliance5,,,,,,The compliance statement for devices support of HP-USER-AUTH MIB.
.1.3.6.1.4.1.11.2.14.11.5.1.19.7.4.7,HP-USER-AUTH::hpicfUsrAuthCompliance6,,,,,,The compliance statement for devices support of HP-USER-AUTH MIB.
.1.3.6.1.4.1.11.2.14.11.5.1.19.7.4.8,HP-USER-AUTH::hpicfUsrAuthCompliance7,,,,,,The compliance statement for device support of HP-USER-AUTH MIB.
.1.3.6.1.4.1.11.2.14.11.5.1.19.7.4.9,HP-USER-AUTH::hpicfUsrAuthCompliance8,,,,,,The compliance statement for device support of HP-USER-AUTH MIB.
.1.3.6.1.4.1.11.2.14.11.5.1.19.7.4.10,HP-USER-AUTH::hpicfUsrAuthCompliance9,,,,,,The compliance statement for device support of HP-USER-AUTH MIB.
.1.3.6.1.4.1.11.2.14.11.5.1.19.7.4.11,HP-USER-AUTH::hpicfUsrAuthCompliance10,,,,,,The compliance statement for device support of HP-USER-AUTH MIB.
.1.3.6.1.4.1.11.2.14.11.5.1.19.7.4.12,HP-USER-AUTH::hpicfUsrAuthCompliance11,,,,,,The compliance statement for devices support of HP-USER-AUTH MIB.
.1.3.6.1.4.1.11.2.14.11.5.1.19.7.4.13,HP-USER-AUTH::hpicfUsrAuthCompliance12,,,,,,The compliance statement for devices support of HP-USER-AUTH MIB.
.1.3.6.1.4.1.11.2.14.11.5.1.19.7.4.14,HP-USER-AUTH::hpicfUsrAuthCompliance13,,,,,,The compliance statement for devices support of HP-USER-AUTH MIB.
.1.3.6.1.4.1.11.2.14.11.5.1.19.7.4.15,HP-USER-AUTH::hpicfUsrAuthCompliance14,,,,,,The compliance statement for device support of HP-USER-AUTH MIB.
.1.3.6.1.4.1.11.2.14.11.5.1.19.7.4.16,HP-USER-AUTH::hpicfUsrAuthCompliance15,,,,,,The compliance statement for devices support of HP-USER-AUTH MIB.
.1.3.6.1.4.1.11.2.14.11.5.1.19.7.4.17,HP-USER-AUTH::hpicfUsrAuthCompliance16,,,,,,The compliance statement for device support of HP-USER-AUTH MIB.
.1.3.6.1.4.1.11.2.14.11.5.1.19.7.4.18,HP-USER-AUTH::hpicfUsrAuthCompliance17,,,,,,The compliance statement for devices support of HP-USER-AUTH MIB.
.1.3.6.1.4.1.11.2.14.11.5.1.19.7.4.19,HP-USER-AUTH::hpicfUsrAuthCompliance18,,,,,,The compliance statement for device support of HP-USER-AUTH MIB.
.1.3.6.1.4.1.11.2.14.11.5.1.19.7.4.20,HP-USER-AUTH::hpicfUsrAuthCompliance19,,,,,,The compliance statement for devices support of HP-USER-AUTH MIB.
.1.3.6.1.4.1.11.2.14.11.5.1.19.7.4.21,HP-USER-AUTH::hpicfUsrAuthCompliance20,,,,,,The compliance statement for devices support of HP-USER-AUTH MIB.
.1.3.6.1.4.1.11.2.14.11.5.1.19.7.4.22,HP-USER-AUTH::hpicfUsrAuthCompliance21,,,,,,The compliance statement for devices support of HP-USER-AUTH MIB.
.1.3.6.1.4.1.11.2.14.11.5.1.19.7.4.23,HP-USER-AUTH::hpicfUsrAuthCompliance22,,,,,,The compliance statement for device support of HP-USER-AUTH MIB.
.1.3.6.1.4.1.11.2.14.11.5.1.19.7.4.24,HP-USER-AUTH::hpicfUsrAuthCompliance23,,,,,,The compliance statement for devices support of HP-USER-AUTH MIB.
.1.3.6.1.4.1.11.2.14.11.5.1.19.8,HP-USER-AUTH::hpicfUsrAuthNotifyConformance,,,,,,
.1.3.6.1.4.1.11.2.14.11.5.1.19.8.1,HP-USER-AUTH::hpicfUsrAuthNotificationGroup,,,,,,A group of authorization notifications.
.1.3.6.1.4.1.11.2.14.11.5.1.19.8.2,HP-USER-AUTH::hpicfNotifcationConfigDataGroup,,,,,,A group of notification data and configuration objects.
.1.3.6.1.4.1.11.2.14.11.5.1.19.8.3,HP-USER-AUTH::hpicfNotificationConfigDataGroup1,,,,,,A group of notification data and configuration objects.
.1.3.6.1.4.1.11.2.14.11.5.1.19.9,HP-USER-AUTH::hpicfUsrAuthMacGlobalConformance,,,,,,
.1.3.6.1.4.1.11.2.14.11.5.1.19.9.1,HP-USER-AUTH::hpicfUsrAuthMacGroup,,,,,,A group of Mac auth global configuration objects.
.1.3.6.1.4.1.11.2.14.11.5.1.19.9.2,HP-USER-AUTH::hpicfUsrAuthMacGroup1,,,,,,A group of Mac auth global configuration objects.
.1.3.6.1.4.1.11.2.14.11.5.1.19.10,HP-USER-AUTH::hpicfUsrAuthWebAuthAccessDeniedConformance,,,,,,
.1.3.6.1.4.1.11.2.14.11.5.1.19.10.1,HP-USER-AUTH::hpicfUsrAuthWebAuthAccessDeniedGroup,,,,,,A group of web-auth access denied configuration objects.
.1.3.6.1.4.1.11.2.14.11.5.1.19.11,HP-USER-AUTH::hpicfUsrAuthMacAuthUsrNumberConformance,,,,,,
.1.3.6.1.4.1.11.2.14.11.5.1.19.11.1,HP-USER-AUTH::hpicfUsrAuthMacAuthUsrNumberGroup,,,,,,Number of Mac authenticated client objects in the switch and port.
.1.3.6.1.4.1.11.2.14.11.5.1.19.12,HP-USER-AUTH::hpicfUsrAuthLastLogin,,,,,,
.1.3.6.1.4.1.11.2.14.11.5.1.19.12.1,HP-USER-AUTH::hpicfUsrAuthLastLoginCurrentGeneration,Unsigned32,read-only,,current,,The current generation number of the rows in hpicfUsrAuthLastLoginTable. To obtain a consistent table view, first read this object, then enumerate the table (reading hpicfUsrAuthLastLoginGeneration last), discarding any rows with hpicfUsrAuthLastLoginGeneration greater than this value.
.1.3.6.1.4.1.11.2.14.11.5.1.19.12.2,HP-USER-AUTH::hpicfUsrAuthLastLoginTable,,not-accessible,,current,,This table records, per-username, the most recent login and login attempts. A record is created by the switch upon the first successful login to a username, and updated upon each subsequent login or login attempt.
.1.3.6.1.4.1.11.2.14.11.5.1.19.12.2.1,HP-USER-AUTH::hpicfUsrAuthLastLoginEntry,,not-accessible,hpicfUsrAuthLastLoginIndex,current,,User last login table entry.
.1.3.6.1.4.1.11.2.14.11.5.1.19.12.2.1.1,HP-USER-AUTH::hpicfUsrAuthLastLoginIndex,Unsigned32,not-accessible,,current,,The index value which uniquely identifies a row in the user last-login table.
.1.3.6.1.4.1.11.2.14.11.5.1.19.12.2.1.2,HP-USER-AUTH::hpicfUsrAuthLastLoginName,OCTET,read-only,,current,,The user's login name.
.1.3.6.1.4.1.11.2.14.11.5.1.19.12.2.1.3,HP-USER-AUTH::hpicfUsrAuthLastLoginPrivilege,INTEGER,read-only,,current,operator(1):manager(2):superuser(3),The privilege level assigned to the user at the most recent login.
.1.3.6.1.4.1.11.2.14.11.5.1.19.12.2.1.4,HP-USER-AUTH::hpicfUsrAuthLastLoginSuccTime,OCTET,read-only,,current,,The time of the user's most recent successful login.
.1.3.6.1.4.1.11.2.14.11.5.1.19.12.2.1.5,HP-USER-AUTH::hpicfUsrAuthLastLoginSuccAddrType,INTEGER,read-only,,current,unknown(0):ipv4(1):ipv6(2):ipv4z(3):ipv6z(4):dns(16),The type of IP address from which the user's most recent successful login occurred. Unknown(0) indicates a console login.
.1.3.6.1.4.1.11.2.14.11.5.1.19.12.2.1.6,HP-USER-AUTH::hpicfUsrAuthLastLoginSuccAddr,OCTET,read-only,,current,,The IP address from which the user's most recent successful login occurred.
.1.3.6.1.4.1.11.2.14.11.5.1.19.12.2.1.7,HP-USER-AUTH::hpicfUsrAuthLastLoginUnsuccTime,OCTET,read-only,,current,,The time of the user's most recent unsuccessful login attempt. This will be zero length if there have been no unsuccessful login attempts since the most recent successful login.
.1.3.6.1.4.1.11.2.14.11.5.1.19.12.2.1.8,HP-USER-AUTH::hpicfUsrAuthLastLoginUnsuccCount,Counter32,read-only,,current,,The count of the user's unsuccessful login attempts since the most recent successful login. This counter is reset to zero whenever hpicfUsrAuthLastLoginSuccTime changes.
.1.3.6.1.4.1.11.2.14.11.5.1.19.12.2.1.9,HP-USER-AUTH::hpicfUsrAuthLastLoginGeneration,Unsigned32,read-only,,current,,The generation number of the objects in this row. This object should be tested after reading other objects in a row to ensure it has not changed from hpicfUsrAuthLastLoginCurrentGeneration, or from the value of hpicfUsrAuthLastLoginGeneration sent in an hpicfUsrAuthCLIAuthFail notification.
.1.3.6.1.4.1.11.2.14.11.5.1.19.12.3,HP-USER-AUTH::hpicfUsrAuthLastLoginDeleteAll,INTEGER,read-write,,current,true(1):false(2),When set to true(1), all rows of the last-login table are deleted. Always reads as false(2).
.1.3.6.1.4.1.11.2.14.11.5.1.19.13,HP-USER-AUTH::hpicfUsrAuthCaptivePortal,,,,,,
.1.3.6.1.4.1.11.2.14.11.5.1.19.13.1,HP-USER-AUTH::hpicfUsrAuthCaptivePortalConfig,,,,,,
.1.3.6.1.4.1.11.2.14.11.5.1.19.13.1.1,HP-USER-AUTH::hpicfUsrAuthCaptivePortalConfigEnabled,INTEGER,read-write,,current,true(1):false(2),Enable redirection to a captive portal server for additional client authentication. When enabled, clients will be  redirected to a captive portal server for further authentication when the RADIUS response includes a redirect URL.
.1.3.6.1.4.1.11.2.14.11.5.1.19.13.1.2,HP-USER-AUTH::hpicfUsrAuthCaptivePortalUrlHashKey,OCTET,read-write,,current,,A shared secret used by the captive portal server to validate a  redirected request. A read of this object always returns an empty string.
.1.3.6.1.4.1.11.2.14.11.5.1.19.13.1.3,HP-USER-AUTH::hpicfUsrAuthCaptivePortalUrlHashKeyEncrypted,OCTET,read-write,,current,,The encrypted form of the shared secret used by the captive portal server to validate a redirected  request. This object should only be written  with an encrypted password previously read from a compatible HP Networking device.
.1.3.6.1.4.1.11.2.14.11.5.1.19.13.2,HP-USER-AUTH::hpicfUsrAuthCaptivePortalProfileTable,,not-accessible,,current,,This table consists of the captive portal profiles configured on the switch. The size of this table is implementation specific.
.1.3.6.1.4.1.11.2.14.11.5.1.19.13.2.1,HP-USER-AUTH::hpicfUsrAuthCaptivePortalProfileEntry,,not-accessible,hpicfUsrAuthCaptivePortalProfileName,current,,A captive portal profile table entry.
.1.3.6.1.4.1.11.2.14.11.5.1.19.13.2.1.1,HP-USER-AUTH::hpicfUsrAuthCaptivePortalProfileName,OCTET,not-accessible,,current,,The name of this profile. All printable ASCII characters are allowed except '.', ' ', and '~'.
.1.3.6.1.4.1.11.2.14.11.5.1.19.13.2.1.2,HP-USER-AUTH::hpicfUsrAuthCaptivePortalProfileRowStatus,INTEGER,read-create,,current,active(1):notInService(2):notReady(3):createAndGo(4):createAndWait(5):destroy(6),The Row Status of this entry. To create a new entry, send an SNMP SET request with a RowStatus of 'createAndGo'. active - the entry is ready to use. notInService - not valid for this table. notReady - the entry is not fully configured. createAndGo - create a new entry. createAndWait - not valid for this table. delete - delete the entry. Entries of hpicfUsrAuthCaptivePortalProfileType 'predefined' cannot be deleted.
.1.3.6.1.4.1.11.2.14.11.5.1.19.13.2.1.3,HP-USER-AUTH::hpicfUsrAuthCaptivePortalProfileType,INTEGER,read-only,,current,predefined(1):custom(2),Indicates whether the corresponding profile is predefined or custom. Predefined profiles cannot be modified or deleted.
.1.3.6.1.4.1.11.2.14.11.5.1.19.13.2.1.4,HP-USER-AUTH::hpicfUsrAuthCaptivePortalProfileRedirectUrl,OCTET,read-create,,current,,The URL of the captive portal the user is redirected to for authentication. An empty value indicates the URL will be sent via the RADIUS VSA: HPE-CAPTIVE-PORTAL-URL(24)
.1.3.6.1.4.1.11.2.14.11.5.1.20,HP-ICF-OID::hpicfPimMIB,,,,,,
.1.3.6.1.4.1.11.2.14.11.5.1.20.1,HP-ICF-PIM::hpicfPimObjects,,,,,,
.1.3.6.1.4.1.11.2.14.11.5.1.20.1.0,HP-ICF-PIM::hpicfPimTraps,,,,,,
.1.3.6.1.4.1.11.2.14.11.5.1.20.1.0.1,HP-ICF-PIM::hpicfPimHardMRTFull,,,,,,This notification signifies that the MRT table is  full and the error has been originated by hardware.  This trap should be generated whenever a multicast  flow or MRT entry cannot be added.
.1.3.6.1.4.1.11.2.14.11.5.1.20.1.0.2,HP-ICF-PIM::hpicfPimSoftMRTFull,,,,,,This notification signifies that the MRT table is  full and the error has been originated by software.  This trap should be generated whenever a multicast  flow or MRT entry cannot be added.
.1.3.6.1.4.1.11.2.14.11.5.1.20.1.1,HP-ICF-PIM::hpicfPim,,,,,,
.1.3.6.1.4.1.11.2.14.11.5.1.20.1.1.1,HP-ICF-PIM::hpicfPimAdminStatus,INTEGER,read-write,,current,enable(1):disable(2),The operational status of the PIM routing protocol on this router. Default is disabled.
.1.3.6.1.4.1.11.2.14.11.5.1.20.1.1.2,HP-ICF-PIM::hpicfPimStateRefreshInterval,Integer32,read-write,,current,,The interval between successive State Refresh messages originated by this router.  Default is 60 seconds.
.1.3.6.1.4.1.11.2.14.11.5.1.20.1.1.3,HP-ICF-PIM::hpicfPimSPTThreshold,Integer32,read-write,,current,,Specifies a threshold for switching to the Shortest  Path Tree (SPT) on this router. If the object has  the special value of -1, the Shared Tree rooted to the Rendezvous Point (RP) will be used indefinitely on the  router. Default is -1.
.1.3.6.1.4.1.11.2.14.11.5.1.20.1.1.4,HP-ICF-PIM::hpicfPimTrapControl,BITS,read-write,,current,neighborLoss(0):hardMrtFull(1):softMrtFull(2),Indicates whether the PIM-enabled router will generate SNMP traps for PIM events. The set bit means 'enabled'. - neighborLoss(0) This bit controls whether the notification trap is allowed to be sent when the neighbor timer expires and the router has no other neighbors on the same interface with a lower IP address than itself. - hardMrtFull(1) This bit controls whether the notification trap is allowed to be sent when the MRT table is full and the error has been originated by hardware. - softMrtFull(2) This bit controls whether the notification trap is allowed to be sent when the MRT table is full and the error has been originated by software.
.1.3.6.1.4.1.11.2.14.11.5.1.20.1.1.5,HP-ICF-PIM::hpicfPimStaticRPSetTable,,not-accessible,,current,,The (conceptual) table containing statically  configured Rendezvous Points (RPs) for IP multicast  group mappings. This information is being used  in the PIM Sparse mode only.
.1.3.6.1.4.1.11.2.14.11.5.1.20.1.1.5.1,HP-ICF-PIM::hpicfPimStaticRPSetEntry,,not-accessible,pimRPSetComponent:hpicfPimStaticRPSetGroupAddress:hpicfPimStaticRPSetGroupMask:hpicfPimStaticRPSetAddress,current,,An entry (row) in the hpicfPimStaticRPSetTable.  NOTE: the pimRPSetComponent is an index that uniquely  identifies the component. Each protocol instance  connected to a separate domain should have a different  index value.
.1.3.6.1.4.1.11.2.14.11.5.1.20.1.1.5.1.1,HP-ICF-PIM::hpicfPimStaticRPSetGroupAddress,IpAddress,not-accessible,,current,,The IP multicast group address which, when combined with hpicfPimStaticRPSetGroupMask, gives the group  prefix for which this entry contains information  about the statically configured RP.
.1.3.6.1.4.1.11.2.14.11.5.1.20.1.1.5.1.2,HP-ICF-PIM::hpicfPimStaticRPSetGroupMask,IpAddress,not-accessible,,current,,The multicast group address mask which, when combined  with hpicfPimStaticRPSetGroupAddress, gives the group  prefix for which this entry contains information about  the statically configured RP.
.1.3.6.1.4.1.11.2.14.11.5.1.20.1.1.5.1.3,HP-ICF-PIM::hpicfPimStaticRPSetAddress,IpAddress,not-accessible,,current,,The IP address of statically configured RP for the  given IP multicast group(s).
.1.3.6.1.4.1.11.2.14.11.5.1.20.1.1.5.1.4,HP-ICF-PIM::hpicfPimStaticRPSetOverride,INTEGER,read-create,,current,true(1):false(2),If true, indicates that the router should ignore the  information learned by a BSR if there is a conflict  between the information this static entry contains and  the information that is learned by the BSR.  Default is false.
.1.3.6.1.4.1.11.2.14.11.5.1.20.1.1.5.1.5,HP-ICF-PIM::hpicfPimStaticRPSetRowStatus,INTEGER,read-create,,current,active(1):notInService(2):notReady(3):createAndGo(4):createAndWait(5):destroy(6),The status of this row, by which new entries may be  created, or old entries deleted from this table.
.1.3.6.1.4.1.11.2.14.11.5.1.20.1.1.6,HP-ICF-PIM::hpicfPimIfTable,,not-accessible,,current,,HP extensions to the pimInterfaceTable.
.1.3.6.1.4.1.11.2.14.11.5.1.20.1.1.6.1,HP-ICF-PIM::hpicfPimIfEntry,,not-accessible,,current,,HP extensions for an entry in the pimInterfaceTable.
.1.3.6.1.4.1.11.2.14.11.5.1.20.1.1.6.1.1,HP-ICF-PIM::hpicfPimIfAddress,IpAddress,read-create,,current,,This is copy of pimInterfaceAddress with read-create  access. PIM uses this source address to send its  protocol packets out on this interface. This address can  be set to one of IP addresses of the interface or  255.255.255.255 if the address is determined dynamically  based on the current IP configuration. The currently used source address is value of pimInterfaceAddress in the latter case.
.1.3.6.1.4.1.11.2.14.11.5.1.20.1.1.6.1.2,HP-ICF-PIM::hpicfPimIfTrigHelloInterval,Integer32,read-create,,current,,The maximum time before a triggered PIM Hello message  is transmitted on this interface. Default is 5 seconds.
.1.3.6.1.4.1.11.2.14.11.5.1.20.1.1.6.1.3,HP-ICF-PIM::hpicfPimIfHelloHoldtime,Integer32,read-create,,current,,The value set in the Holdtime field of Hello messages  transmitted on this interface. This should be 3.5  times the value of pimInterfaceHelloInterval.  Default is 105 seconds.
.1.3.6.1.4.1.11.2.14.11.5.1.20.1.1.6.1.4,HP-ICF-PIM::hpicfPimIfLanPruneDelay,INTEGER,read-create,,current,true(1):false(2),Turns the LAN Prune Delay options ON and OFF, on this interface. Default is true.
.1.3.6.1.4.1.11.2.14.11.5.1.20.1.1.6.1.5,HP-ICF-PIM::hpicfPimIfPropagationDelay,Integer32,read-create,,current,,The value inserted into the LAN Prune Delay field of a  LAN Prune Delay option on this interface.  Default is 500 milliseconds.
.1.3.6.1.4.1.11.2.14.11.5.1.20.1.1.6.1.6,HP-ICF-PIM::hpicfPimIfOverrideInterval,Integer32,read-create,,current,,The value inserted into the Override Interval field of  a LAN Prune Delay option on this interface.  Default is 2500 milliseconds.
.1.3.6.1.4.1.11.2.14.11.5.1.20.1.1.6.1.7,HP-ICF-PIM::hpicfPimIfGenerationID,INTEGER,read-create,,current,true(1):false(2),Turns the Generation ID option ON and OFF, on this interface. Default is false.
.1.3.6.1.4.1.11.2.14.11.5.1.20.1.1.6.1.8,HP-ICF-PIM::hpicfPimIfJoinPruneHoldtime,Unsigned32,read-create,,current,,The value inserted into the Holdtime field of a Join/ Prune message sent on this interface. The value should be 3.5 times pimInterfaceJoinPruneInterval. Default is 210 seconds.
.1.3.6.1.4.1.11.2.14.11.5.1.20.1.1.6.1.9,HP-ICF-PIM::hpicfPimIfGraftRetryInterval,Integer32,read-create,,current,,The interval a PIM router waits for a Graft Ack before  re-sending a Graft on this interface.  Default is 3 seconds.
.1.3.6.1.4.1.11.2.14.11.5.1.20.1.1.6.1.10,HP-ICF-PIM::hpicfPimIfMaxGraftRetries,Integer32,read-create,,current,,The maximum number of times this router will re-send a  Graft on this interface. Default is 2.
.1.3.6.1.4.1.11.2.14.11.5.1.20.1.1.6.1.11,HP-ICF-PIM::hpicfPimIfSRTTLThreshold,Unsigned32,read-create,,current,,The Time To Live in a PIM-DM State Refresh message at which it is not forwarded on this interface. Default is 0.
.1.3.6.1.4.1.11.2.14.11.5.1.20.1.1.6.1.12,HP-ICF-PIM::hpicfPimIfLanDelayEnabled,INTEGER,read-only,,current,true(1):false(2),Evaluates to TRUE if all routers on this interface are using the LAN Prune Delay Option.
.1.3.6.1.4.1.11.2.14.11.5.1.20.1.1.6.1.13,HP-ICF-PIM::hpicfPimIfSRCapable,INTEGER,read-only,,current,true(1):false(2),Evaluates to TRUE if all routers on this interface are using the State Refresh Capable Option.
.1.3.6.1.4.1.11.2.14.11.5.1.20.1.1.6.1.14,HP-ICF-PIM::hpicfPimIfDRPriority,Unsigned32,read-create,,current,,The Designated Router Priority inserted into the DR priority option on this interface. Default is 1.
.1.3.6.1.4.1.11.2.14.11.5.1.20.1.1.6.1.15,HP-ICF-PIM::hpicfPimIfNBRTimeout,Integer32,read-create,,current,,Time interval after which the router will consider a  neighbor to not be present, if no PIM Hello messages arrived on the interface. Default is 180 seconds.
.1.3.6.1.4.1.11.2.14.11.5.1.20.1.1.7,HP-ICF-PIM::hpicfPimComponentTable,,not-accessible,,current,,HP extensions to the pimComponentTable - the  (conceptual) table containing objects specific to a PIM domain. One row exists for each domain to which  the router is connected. Typically, a PIM-SM router  will be a member of exactly one domain, however, the  table also supports routers which may form a border  between two PIM-SM domains and do not forward Bootstrap  messages between them.
.1.3.6.1.4.1.11.2.14.11.5.1.20.1.1.7.1,HP-ICF-PIM::hpicfPimComponentEntry,,not-accessible,,current,,HP extensions for an entry in the pimComponentTable.
.1.3.6.1.4.1.11.2.14.11.5.1.20.1.1.7.1.1,HP-ICF-PIM::hpicfPimComponentCBSRAdminStatus,INTEGER,read-create,,current,enable(1):disable(2),This objects specifies whether or not the router  configured to be a Candidate BSR for the local  PIM region. Default is disabled.
.1.3.6.1.4.1.11.2.14.11.5.1.20.1.1.7.1.2,HP-ICF-PIM::hpicfPimComponentCBSRAddress,IpAddress,read-create,,current,,The IP address the Candidate BSR router will advertise  for the local PIM region.
.1.3.6.1.4.1.11.2.14.11.5.1.20.1.1.7.1.3,HP-ICF-PIM::hpicfPimComponentCBSRPriority,Integer32,read-create,,current,,The priority for Candidate BSR router. In BSR election process the candidate BSR with the highest (numerically  bigger) priority becomes the BSR. If the priority values  are the same, the router with the larger IP address is  the BSR. Default is 0.
.1.3.6.1.4.1.11.2.14.11.5.1.20.1.1.7.1.4,HP-ICF-PIM::hpicfPimComponentCBSRHashMaskLength,Integer32,read-create,,current,,Specifies the length (in bits) of a multicast group address to use when mapping a group to one of the  candidate RPs from the RP-Set whose group-prefix  includes the group. The recommended value for IPv4  is 30, for IPv6 is 126. Default is 30.
.1.3.6.1.4.1.11.2.14.11.5.1.20.1.1.7.1.5,HP-ICF-PIM::hpicfPimComponentCBSRMessageInterval,Integer32,read-create,,current,,If this router is the elected BSR, then this is the  interval for sending (multicast out) periodic Bootstrap  (RP-Set) messages on all PIM SM interfaces. Default is 60 seconds.
.1.3.6.1.4.1.11.2.14.11.5.1.20.1.1.7.1.6,HP-ICF-PIM::hpicfPimComponentCRPPriority,Integer32,read-create,,current,,The priority for the Candidate RP for the local PIM  domain. Determines which Candidate RPs get selected by  the BSR to be in the RP Set. The smaller value means  the higher priority (a value of zero is the highest  possible priority). Default is 192.
.1.3.6.1.4.1.11.2.14.11.5.1.20.1.1.7.1.7,HP-ICF-PIM::hpicfPimComponentCRPAdvInterval,Unsigned32,read-only,,current,,The interval at which the Candidate RP transmits (unicast to the elected BSR) advertise messages in the local PIM domain.
.1.3.6.1.4.1.11.2.14.11.5.1.20.1.1.7.1.8,HP-ICF-PIM::hpicfPimComponentBSRPriority,Unsigned32,read-only,,current,,The priority of the Bootstrap Router (BSR) elected for the local PIM region.
.1.3.6.1.4.1.11.2.14.11.5.1.20.1.1.7.1.9,HP-ICF-PIM::hpicfPimComponentBSRHashMaskLength,Unsigned32,read-only,,current,,The hash mask length of the elected Bootstrap  Router (BSR).
.1.3.6.1.4.1.11.2.14.11.5.1.20.1.1.7.1.10,HP-ICF-PIM::hpicfPimComponentBSRUpTime,TimeTicks,read-only,,current,,Length of time that the elected Bootstrap Router (BSR) has been up.
.1.3.6.1.4.1.11.2.14.11.5.1.20.1.1.7.1.11,HP-ICF-PIM::hpicfPimComponentBSRNextMessage,TimeTicks,read-only,,current,,Time in which the next bootstrap message is due from  the elected Bootstrap Router (BSR).
.1.3.6.1.4.1.11.2.14.11.5.1.20.1.1.8,HP-ICF-PIM::hpicfPimRemoveConfig,INTEGER,read-write,,current,true(1):false(2),PIM is halted. This objects clears all existing PIM configuration, intializes the pim config to the default state. SnmpGet on this will always return false. An SnmpSet of false has no effect.
.1.3.6.1.4.1.11.2.14.11.5.1.20.1.1.9,HP-ICF-PIM::hpicfPimStaticRpfTable,,not-accessible,,current,,The (conceptual) table containing statically configured  reverse path forwarding (RPF) source address to interface  mappings. This information is currently used in the PIM  sparse mode only.
.1.3.6.1.4.1.11.2.14.11.5.1.20.1.1.9.1,HP-ICF-PIM::hpicfPimStaticRpfEntry,,not-accessible,hpicfPimStaticRpfSourceAddressType:hpicfPimStaticRpfSourceAddress:hpicfPimStaticRpfSourcePrefixLength:hpicfPimStaticRpfAddressType:hpicfPimStaticRpfAddress,current,,A row in the hpicfPimStaticRpfTable.
.1.3.6.1.4.1.11.2.14.11.5.1.20.1.1.9.1.1,HP-ICF-PIM::hpicfPimStaticRpfSourceAddressType,INTEGER,not-accessible,,current,unknown(0):ipv4(1):ipv6(2):ipv4z(3):ipv6z(4):dns(16),The IP address type of the statically configured  multicast source.
.1.3.6.1.4.1.11.2.14.11.5.1.20.1.1.9.1.2,HP-ICF-PIM::hpicfPimStaticRpfSourceAddress,OCTET,not-accessible,,current,,The IP address of the statically configured  multicast source.
.1.3.6.1.4.1.11.2.14.11.5.1.20.1.1.9.1.3,HP-ICF-PIM::hpicfPimStaticRpfSourcePrefixLength,Unsigned32,not-accessible,,current,,The prefix length of the statically  configured multicast source.
.1.3.6.1.4.1.11.2.14.11.5.1.20.1.1.9.1.4,HP-ICF-PIM::hpicfPimStaticRpfAddressType,INTEGER,not-accessible,,current,unknown(0):ipv4(1):ipv6(2):ipv4z(3):ipv6z(4):dns(16),The type of RPF address for this route. The value of this object must be equal to a value appropriate for the corresponding instance of the hpicfPimStaticRpfSourceAddressType object.
.1.3.6.1.4.1.11.2.14.11.5.1.20.1.1.9.1.5,HP-ICF-PIM::hpicfPimStaticRpfAddress,OCTET,not-accessible,,current,,The IP address of the interface to use for RPF  checks.
.1.3.6.1.4.1.11.2.14.11.5.1.20.1.1.9.1.6,HP-ICF-PIM::hpicfPimStaticRpfRowStatus,INTEGER,read-create,,current,active(1):notInService(2):notReady(3):createAndGo(4):createAndWait(5):destroy(6),The status of this row, by which new entries may be  created, or old entries deleted from this table.
.1.3.6.1.4.1.11.2.14.11.5.1.20.1.1.9.1.7,HP-ICF-PIM::hpicfPimStaticRpfOverrideState,INTEGER,read-only,,current,active(1):inActive(2),The state of this RPF override entry.
.1.3.6.1.4.1.11.2.14.11.5.1.20.2,HP-ICF-PIM::hpicfPimConformance,,,,,,
.1.3.6.1.4.1.11.2.14.11.5.1.20.2.1,HP-ICF-PIM::hpicfPimGroups,,,,,,
.1.3.6.1.4.1.11.2.14.11.5.1.20.2.1.1,HP-ICF-PIM::hpicfPimNotificationGroup,,,,,,A collection of notifications that extends  notifications defined in RFC 2934 - used for signaling  important PIM events.
.1.3.6.1.4.1.11.2.14.11.5.1.20.2.1.2,HP-ICF-PIM::hpicfPimBaseGroup,,,,,,A collection of objects to support basic PIM  configuration information on HP routers.
.1.3.6.1.4.1.11.2.14.11.5.1.20.2.1.3,HP-ICF-PIM::hpicfPimStaticRPSetMappingGroup,,,,,,A collection of objects to support management of static Rendezvous Point (RP) to IP multicast group  mappings.
.1.3.6.1.4.1.11.2.14.11.5.1.20.2.1.4,HP-ICF-PIM::hpicfPimSparseIfGroup,,,,,,A collection of objects that extends objects defined in pimInterfaceTable and used to support management of  interfaces operating in PIM Sparse Mode.
.1.3.6.1.4.1.11.2.14.11.5.1.20.2.1.5,HP-ICF-PIM::hpicfPimDenseIfGroup,,,,,,A collection of objects that extends objects defined in pimInterfaceTable and used to support management of  interfaces operating in PIM Dense Mode.
.1.3.6.1.4.1.11.2.14.11.5.1.20.2.1.6,HP-ICF-PIM::hpicfPimComponentGroup,,,,,,A collection of objects that extends objects defined  in pimComponentTable (RFC 2934).
.1.3.6.1.4.1.11.2.14.11.5.1.20.2.1.7,HP-ICF-PIM::hpicfPimStaticRpfGroup,,,,,,A collection of objects defined  in hpicfPimStaticRpfTable.
.1.3.6.1.4.1.11.2.14.11.5.1.20.2.2,HP-ICF-PIM::hpicfPimCompliances,,,,,,
.1.3.6.1.4.1.11.2.14.11.5.1.20.2.2.1,HP-ICF-PIM::hpicfPimSparseMIBCompliance,,,,,,The compliance statement for HP routers running PIM Sparse Mode and implementing the HP-ICF-PIM MIB.
.1.3.6.1.4.1.11.2.14.11.5.1.20.2.2.2,HP-ICF-PIM::hpicfPimDenseMIBCompliance,,,,,,The compliance statement for HP routers running PIM Dense Mode and implementing the HP-ICF-PIM MIB.
.1.3.6.1.4.1.11.2.14.11.5.1.20.2.2.3,HP-ICF-PIM::hpicfPimNotificationCompliance,,,,,,The collection of notifications that extends  notifications defined in RFC 2934 - used for signalling  important PIM events.
.1.3.6.1.4.1.11.2.14.11.5.1.23,HP-ICF-OID::hpicfUdpFwd,,,,,,
.1.3.6.1.4.1.11.2.14.11.5.1.23.0,HP-ICF-UDP-FORWARD::hpicfUdpFwdNotification,,,,,,
.1.3.6.1.4.1.11.2.14.11.5.1.23.1,HP-ICF-UDP-FORWARD::hpicfUdpFwdObjects,,,,,,
.1.3.6.1.4.1.11.2.14.11.5.1.23.1.1,HP-ICF-UDP-FORWARD::hpicfUdpBcastFwdAdminStatus,INTEGER,read-write,,current,enabled(1):disabled(2),The operational status of the UDP Broadcast Forward feature
.1.3.6.1.4.1.11.2.14.11.5.1.23.1.2,HP-ICF-UDP-FORWARD::hpicfUdpFwdServersTable,,not-accessible,,current,,This table contains a list of UDP Server Address and  associated port numbers for which forwarding  is enabled.
.1.3.6.1.4.1.11.2.14.11.5.1.23.1.2.1,HP-ICF-UDP-FORWARD::hpicfUdpFwdServersEntry,,not-accessible,hpicfUdpFwdVlanId:hpicfUdpFwdServerIndex,current,,An entry of the UDP broadcast forwarding table.
.1.3.6.1.4.1.11.2.14.11.5.1.23.1.2.1.1,HP-ICF-UDP-FORWARD::hpicfUdpFwdVlanId,Integer32,not-accessible,,current,,The VLAN index which uniquely identifies a row  in this table.
.1.3.6.1.4.1.11.2.14.11.5.1.23.1.2.1.2,HP-ICF-UDP-FORWARD::hpicfUdpFwdServerIndex,Integer32,not-accessible,,current,,Server table index which uniquely identifies a position in table of servers (for VlanIndex).
.1.3.6.1.4.1.11.2.14.11.5.1.23.1.2.1.3,HP-ICF-UDP-FORWARD::hpicfUdpFwdServerAddressType,INTEGER,read-create,,current,unknown(0):ipv4(1):ipv6(2):ipv4z(3):ipv6z(4):dns(16),The type of IP address for the configured server
.1.3.6.1.4.1.11.2.14.11.5.1.23.1.2.1.4,HP-ICF-UDP-FORWARD::hpicfUdpFwdServerAddress,OCTET,read-create,,current,, This object contains the server IP address. The type of address specified by this object is  indicated by the corresponding instance of the  hpicfUdpFwdServerAddressType.  An attempt to create a row in which the length of this object is not consistent with the type specified by hpicfUdpFwdServerAddressType must be rejected.
.1.3.6.1.4.1.11.2.14.11.5.1.23.1.2.1.5,HP-ICF-UDP-FORWARD::hpicfUdpFwdPortNumber,Unsigned32,read-create,,current,, UDP port number for which UDP broadcast forwarding is enabled.
.1.3.6.1.4.1.11.2.14.11.5.1.23.1.2.1.6,HP-ICF-UDP-FORWARD::hpicfUdpFwdRowStatus,INTEGER,read-create,,current,active(1):notInService(2):notReady(3):createAndGo(4):createAndWait(5):destroy(6),Status of table row.
.1.3.6.1.4.1.11.2.14.11.5.1.23.1.3,HP-ICF-UDP-FORWARD::hpicfUdpFwdDhcpRelayClientDiscards,Counter32,read-only,,current,,The number of DHCP client packets discarded
.1.3.6.1.4.1.11.2.14.11.5.1.23.1.4,HP-ICF-UDP-FORWARD::hpicfUdpFwdDhcpRelayClientForwards,Counter32,read-only,,current,,The number of DHCP client packets relayed 
.1.3.6.1.4.1.11.2.14.11.5.1.23.1.5,HP-ICF-UDP-FORWARD::hpicfUdpFwdDhcpRelayServerDiscards,Counter32,read-only,,current,,The number of DHCP server packets discarded 
.1.3.6.1.4.1.11.2.14.11.5.1.23.1.6,HP-ICF-UDP-FORWARD::hpicfUdpFwdDhcpRelayServerForwards,Counter32,read-only,,current,,The number of DHCP server packets relayed 
.1.3.6.1.4.1.11.2.14.11.5.1.23.2,HP-ICF-UDP-FORWARD::hpicfUdpFwdConformance,,,,,,
.1.3.6.1.4.1.11.2.14.11.5.1.23.2.1,HP-ICF-UDP-FORWARD::hpicfUdpFwdCompliances,,,,,,
.1.3.6.1.4.1.11.2.14.11.5.1.23.2.1.1,HP-ICF-UDP-FORWARD::hpicfUdpFwdCompliance,,,,,, A compliance statement for HP Routing switches with UDP  packet forwarding
.1.3.6.1.4.1.11.2.14.11.5.1.23.2.1.2,HP-ICF-UDP-FORWARD::hpicfUdpFwdStatCompliance,,,,,, A compliance statement for HP Routing switches with UDP  packet forwarding statistics
.1.3.6.1.4.1.11.2.14.11.5.1.23.2.2,HP-ICF-UDP-FORWARD::hpicfUdpFwdGroups,,,,,,
.1.3.6.1.4.1.11.2.14.11.5.1.23.2.2.1,HP-ICF-UDP-FORWARD::hpicfUdpFwdCfgGroup,,,,,,Enable/Disable the UDP Forwarder in the routing switch
.1.3.6.1.4.1.11.2.14.11.5.1.23.2.2.2,HP-ICF-UDP-FORWARD::hpicfUdpFwdServerTableGroup,,,,,,A collection of objects allowing configuration of UDP Forwarder Server Address table
.1.3.6.1.4.1.11.2.14.11.5.1.23.2.2.3,HP-ICF-UDP-FORWARD::hpicfUdpFwdDhcpRelayStatsGroup,,,,,,A collection of statistics objects for DHCP Relay agent
.1.3.6.1.4.1.11.2.14.11.5.1.24,HP-ICF-OID::hpicfConnectionRateFilter,,,,,,
.1.3.6.1.4.1.11.2.14.11.5.1.24.0,HP-ICF-CONNECTION-RATE-FILTER::hpicfConnectionRateFilterNotifications,,,,,,
.1.3.6.1.4.1.11.2.14.11.5.1.24.0.1,HP-ICF-CONNECTION-RATE-FILTER::hpicfConnectionRateFilterNotification,,,,,,This Notification indicates that the host associated with the specified IP Address has been flagged by the connection rate filter and may have been throttled or blocked.
.1.3.6.1.4.1.11.2.14.11.5.1.24.1,HP-ICF-CONNECTION-RATE-FILTER::hpicfConnectionRateFilterNotificationControl,,,,,,
.1.3.6.1.4.1.11.2.14.11.5.1.24.1.1,HP-ICF-CONNECTION-RATE-FILTER::hpicfConnectionRateFilterNotificationControlEnable,INTEGER,read-write,,current,true(1):false(2),This object controls, whether or not notifications from the agent are enabled. The value true(1) means that notifications are enabled; the value false(2) means that they are not. The default value is enabled.
.1.3.6.1.4.1.11.2.14.11.5.1.24.1.2,HP-ICF-CONNECTION-RATE-FILTER::hpicfConnectionRateFilterSensitivity,INTEGER,read-write,,current,none(0):low(1):medium(2):high(3):aggressive(4),This variable is for setting the level of filtering required for connection-rate-filter.
.1.3.6.1.4.1.11.2.14.11.5.1.24.2,HP-ICF-CONNECTION-RATE-FILTER::hpicfConnectionRateFilterObjects,,,,,,
.1.3.6.1.4.1.11.2.14.11.5.1.24.2.1,HP-ICF-CONNECTION-RATE-FILTER::hpicifConnectionRateFilterVlanId,Integer32,accessible-for-notify,,current,,This variable uniquely identifies the vlan on which the host was flagged by the connection rate filter.
.1.3.6.1.4.1.11.2.14.11.5.1.24.2.2,HP-ICF-CONNECTION-RATE-FILTER::hpicifConnectionRateFilterInetAddress,OCTET,accessible-for-notify,,current,,This variable uniquely identifies the IP address of the host flagged by the connection rate filter.
.1.3.6.1.4.1.11.2.14.11.5.1.24.2.3,HP-ICF-CONNECTION-RATE-FILTER::hpicifConnectionRateFilterInetAddressType,INTEGER,accessible-for-notify,,current,unknown(0):ipv4(1):ipv6(2):ipv4z(3):ipv6z(4):dns(16),This variable uniquely identifies the type of IP address of the host flagged by the connection rate filter.
.1.3.6.1.4.1.11.2.14.11.5.1.24.2.4,HP-ICF-CONNECTION-RATE-FILTER::hpicifConnectionRateFilterMode,INTEGER,accessible-for-notify,,current,inform(0):throttle(1):block(2),This variable identifies the mode applied to the host flagged by the connection rate filter.
.1.3.6.1.4.1.11.2.14.11.5.1.24.3,HP-ICF-CONNECTION-RATE-FILTER::hpicfConnectionRateFilterConformance,,,,,,
.1.3.6.1.4.1.11.2.14.11.5.1.24.3.1,HP-ICF-CONNECTION-RATE-FILTER::hpicfConnectionRateFilterCompliances,,,,,,
.1.3.6.1.4.1.11.2.14.11.5.1.24.3.1.1,HP-ICF-CONNECTION-RATE-FILTER::hpicfConnectionRateFilterCompliance,,,,,,A compliance statement for HP Routing switches with Connection Rate Filtering capability
.1.3.6.1.4.1.11.2.14.11.5.1.24.3.1.2,HP-ICF-CONNECTION-RATE-FILTER::hpicfConnectionRateFilterCompliance1,,,,,,A compliance statement for HP Routing switches with Connection Rate Filtering capability
.1.3.6.1.4.1.11.2.14.11.5.1.24.3.2,HP-ICF-CONNECTION-RATE-FILTER::hpicfConnectionRateFilterGroups,,,,,,
.1.3.6.1.4.1.11.2.14.11.5.1.24.3.2.1,HP-ICF-CONNECTION-RATE-FILTER::hpicfConnectionRateFilterNotifyGroup,,,,,,A collection of notifications used to indicate changes in Connection Rate Filter status
.1.3.6.1.4.1.11.2.14.11.5.1.24.3.2.2,HP-ICF-CONNECTION-RATE-FILTER::hpicfConnectionRateFilterObjectGroup,,,,,,A collection of objects for configuring the Connection Rate Filter.
.1.3.6.1.4.1.11.2.14.11.5.1.24.3.2.3,HP-ICF-CONNECTION-RATE-FILTER::hpicfConnectionRateFilterObjectGroup1,,,,,,A collection of objects for configuring the Connection Rate Filter.
.1.3.6.1.4.1.11.2.14.11.5.1.24.4,HP-ICF-CONNECTION-RATE-FILTER::hpicfConnectionRateFilterIfModeConfig,,,,,,
.1.3.6.1.4.1.11.2.14.11.5.1.24.4.1,HP-ICF-CONNECTION-RATE-FILTER::hpicfConnectionRateFilterIfModeConfigTable,,not-accessible,,current,,This table contains objects for configuring mode of  the host flagged by the connection rate filter.
.1.3.6.1.4.1.11.2.14.11.5.1.24.4.1.1,HP-ICF-CONNECTION-RATE-FILTER::hpicfConnectionRateFilterIfModeConfigEntry,,not-accessible,ifIndex,current,,An entry in the  hpicfConnectionRateFilterIfModeConfigEntry contains objects for configuring mode of the host flagged  by the connection rate filter.
.1.3.6.1.4.1.11.2.14.11.5.1.24.4.1.1.1,HP-ICF-CONNECTION-RATE-FILTER::hpicfConnectionRateFilterIfModeValue,INTEGER,read-write,,current,none(0):inform(1):throttle(2):block(3),This variable identifies the mode applied to the host flagged by the connection rate filter.
.1.3.6.1.4.1.11.2.14.11.5.1.25,HP-ICF-OID::hpicfDot1xMIB,,,,,,
.1.3.6.1.4.1.11.2.14.11.5.1.25.1,HP-DOT1X-EXTENSIONS-MIB::hpicfDot1xMIBObjects,,,,,,
.1.3.6.1.4.1.11.2.14.11.5.1.25.1.1,HP-DOT1X-EXTENSIONS-MIB::hpicfDot1xSystem,,,,,,
.1.3.6.1.4.1.11.2.14.11.5.1.25.1.1.1,HP-DOT1X-EXTENSIONS-MIB::hpicfDot1xPaePortTable,,not-accessible,,current,,This table supplements the 'dot1xPaePortTable'.
.1.3.6.1.4.1.11.2.14.11.5.1.25.1.1.1.1,HP-DOT1X-EXTENSIONS-MIB::hpicfDot1xPaePortEntry,,not-accessible,,current,,The fields in these entries will be used to supplement 'dot1xPaePortEntry'.
.1.3.6.1.4.1.11.2.14.11.5.1.25.1.1.1.1.1,HP-DOT1X-EXTENSIONS-MIB::hpicfDot1xPaePortAuth,INTEGER,read-write,,current,true(1):false(2),This object allows enable/disable authenticator functionality on a port.
.1.3.6.1.4.1.11.2.14.11.5.1.25.1.1.1.1.2,HP-DOT1X-EXTENSIONS-MIB::hpicfDot1xPaePortSupp,INTEGER,read-write,,current,true(1):false(2),This object allows enable/disable supplicant functionality on a port.
.1.3.6.1.4.1.11.2.14.11.5.1.25.1.1.1.1.3,HP-DOT1X-EXTENSIONS-MIB::hpicfDot1xPaePortMixed,INTEGER,read-write,,current,true(1):false(2),This object allows enable/disable guests on ports with authenticated clients.
.1.3.6.1.4.1.11.2.14.11.5.1.25.1.2,HP-DOT1X-EXTENSIONS-MIB::hpicfDot1xAuthenticator,,,,,,
.1.3.6.1.4.1.11.2.14.11.5.1.25.1.2.1,HP-DOT1X-EXTENSIONS-MIB::hpicfDot1xAuthConfigTable,,not-accessible,,current,,This table supplements the 'dot1xAuthConfigTable'.
.1.3.6.1.4.1.11.2.14.11.5.1.25.1.2.1.1,HP-DOT1X-EXTENSIONS-MIB::hpicfDot1xAuthConfigEntry,,not-accessible,,current,,The fields in these entries will be used to supplement 'dot1xAuthConfigEntry'.
.1.3.6.1.4.1.11.2.14.11.5.1.25.1.2.1.1.1,HP-DOT1X-EXTENSIONS-MIB::hpicfDot1xAuthAuthVid,Unsigned32,read-write,,current,,This object configures PVID for authorized  802.1x port.
.1.3.6.1.4.1.11.2.14.11.5.1.25.1.2.1.1.2,HP-DOT1X-EXTENSIONS-MIB::hpicfDot1xAuthUnauthVid,Unsigned32,read-write,,current,,This object configures PVID for unauthorized  802.1x port.
.1.3.6.1.4.1.11.2.14.11.5.1.25.1.2.1.1.3,HP-DOT1X-EXTENSIONS-MIB::hpicfDot1xAuthUnauthPeriod,Unsigned32,read-write,,current,,This objects configures the period of time, in seconds, which authenticator will wait for authentication before transition to guest VLAN mode.
.1.3.6.1.4.1.11.2.14.11.5.1.25.1.2.1.1.4,HP-DOT1X-EXTENSIONS-MIB::hpicfDot1xAuthClientLimit,Unsigned32,read-write,,deprecated,,*************THIS OBJECT IS DEPRECATED ********** The maximum number of authenticated clients to allow on  the port.
.1.3.6.1.4.1.11.2.14.11.5.1.25.1.2.1.1.5,HP-DOT1X-EXTENSIONS-MIB::hpicfDot1xAuthLogoffPeriod,Unsigned32,read-write,,current,,Specifies the period, in seconds, at which an  authenticated client will be considered unauthenticated for a lack of activity (i.e. traffic originating  from client).
.1.3.6.1.4.1.11.2.14.11.5.1.25.1.2.1.1.6,HP-DOT1X-EXTENSIONS-MIB::hpicfDot1xAuthClientLimit2,Unsigned32,read-write,,current,,The maximum number of authenticated clients to allow on the port if greater than 0. If 0 then authenticator controls port as a single entity - no client limit.
.1.3.6.1.4.1.11.2.14.11.5.1.25.1.2.1.1.7,HP-DOT1X-EXTENSIONS-MIB::hpicfDot1xAuthCachedReauthPeriod,Unsigned32,read-write,,current,,The value indicates the period in seconds, during which  cached re-authentication is allowed on the port. If  value is zero then the period of cached re-authentication is unlimited.
.1.3.6.1.4.1.11.2.14.11.5.1.25.1.2.2,HP-DOT1X-EXTENSIONS-MIB::hpicfDot1xSMAuthConfigTable,,not-accessible,,current,,A table that contains the configuration and basic status  objects for Authenticator PAEs associated with each  shared-media port.
.1.3.6.1.4.1.11.2.14.11.5.1.25.1.2.2.1,HP-DOT1X-EXTENSIONS-MIB::hpicfDot1xSMAuthConfigEntry,,not-accessible,hpicfDot1xSMAuthPaePort:hpicfDot1xSMAuthMacAddr,current,,The configuration information for an Authenticator PAE.
.1.3.6.1.4.1.11.2.14.11.5.1.25.1.2.2.1.1,HP-DOT1X-EXTENSIONS-MIB::hpicfDot1xSMAuthPaePort,Integer32,not-accessible,,current,,The interface index associated with this  Authenticator PAE. On wired HP products the interface index is the physical port. On wireless products it is the instance (whether real or virtual) of an AP.
.1.3.6.1.4.1.11.2.14.11.5.1.25.1.2.2.1.2,HP-DOT1X-EXTENSIONS-MIB::hpicfDot1xSMAuthMacAddr,OCTET,read-only,,current,,The 48-bit IEEE media access control address of  The supplicant associated with this Authenticator PAE.
.1.3.6.1.4.1.11.2.14.11.5.1.25.1.2.2.1.3,HP-DOT1X-EXTENSIONS-MIB::hpicfDot1xSMAuthInitialize,INTEGER,read-write,,current,true(1):false(2),The initialization control for this Authenticator PAE.  Setting this attribute TRUE causes the PAE to be  initialized. The attribute value reverts to FALSE  once initialization has completed.
.1.3.6.1.4.1.11.2.14.11.5.1.25.1.2.2.1.4,HP-DOT1X-EXTENSIONS-MIB::hpicfDot1xSMAuthReauthenticate,INTEGER,read-write,,current,true(1):false(2),The reauthentication control for this Authenticator PAE.  Setting this attribute TRUE causes the Authenticator  PAE state machine for the Port to reauthenticate the  Supplicant. Setting this attribute FALSE has no effect. This attribute always returns FALSE when it is read.
.1.3.6.1.4.1.11.2.14.11.5.1.25.1.2.2.1.5,HP-DOT1X-EXTENSIONS-MIB::hpicfDot1xSMAuthPaeState,INTEGER,read-only,,current,initialize(1):disconnected(2):connecting(3):authenticating(4):authenticated(5):aborting(6):held(7):forceAuth(8):forceUnauth(9):restart(10):heldNoVlan(11):heldUnauthVlan(12),The current value of the Authenticator PAE state machine.
.1.3.6.1.4.1.11.2.14.11.5.1.25.1.2.2.1.6,HP-DOT1X-EXTENSIONS-MIB::hpicfDot1xSMAuthBackendAuthState,INTEGER,read-only,,current,request(1):response(2):success(3):fail(4):timeout(5):idle(6):initialize(7):ignore(8),The current state of the Backend Authentication state machine.
.1.3.6.1.4.1.11.2.14.11.5.1.25.1.2.2.1.7,HP-DOT1X-EXTENSIONS-MIB::hpicfDot1xSMAuthReAuthPeriod,Unsigned32,read-only,,current,,The value, in seconds, of the reAuthPeriod constant currently in use by the Reauthentication Timer state machine.
.1.3.6.1.4.1.11.2.14.11.5.1.25.1.2.2.1.8,HP-DOT1X-EXTENSIONS-MIB::hpicfDot1xSMAuthReAuthEnabled,INTEGER,read-only,,current,true(1):false(2),The enable/disable control used by the Reauthentication Timer state machine (8.5.5.1).
.1.3.6.1.4.1.11.2.14.11.5.1.25.1.2.2.1.9,HP-DOT1X-EXTENSIONS-MIB::hpicfDot1xSMAuthSessionTimeout,Unsigned32,read-only,,current,,Specifies the RADIUS Server set session timeout for reauthentication of the user. When ST = 0, user gets reauthenticated at reauth-period secs, ST < 60 it is set to 60 secs and then user is reauthenticated, ST > 60 user is reauthenticated at ST secs.
.1.3.6.1.4.1.11.2.14.11.5.1.25.1.2.3,HP-DOT1X-EXTENSIONS-MIB::hpicfDot1xAuthDiagTable,,not-accessible,,current,,A table that contains the diagnostics objects for the Authenticator PAE associated with each Port. An entry appears in this table for each port that may authenticate access to itself.
.1.3.6.1.4.1.11.2.14.11.5.1.25.1.2.3.1,HP-DOT1X-EXTENSIONS-MIB::hpicfDot1xAuthDiagEntry,,not-accessible,dot1xPaePortNumber,current,,The diagnostic information for an Authenticator PAE.
.1.3.6.1.4.1.11.2.14.11.5.1.25.1.2.3.1.1,HP-DOT1X-EXTENSIONS-MIB::hpicfDot1xAuthNumberOfSuccessAuthentication,Counter32,read-only,,current,,Counts the number of times that authenticator received an EAP-Success message from Authentication Server.  Indicates that Supplicant has successfully authenticated to  the Authentication Server.
.1.3.6.1.4.1.11.2.14.11.5.1.25.1.2.3.1.2,HP-DOT1X-EXTENSIONS-MIB::hpicfDot1xAuthNumberOfFailedAuthentication,Counter32,read-only,,current,,Counts the number of times that authenticator received an EAP-Failure message from Authentication Server.  Indicates that Supplicant has failed to authenticate to  the Authentication Server.
.1.3.6.1.4.1.11.2.14.11.5.1.25.1.2.4,HP-DOT1X-EXTENSIONS-MIB::hpicfDot1xAuthStatsTable,,not-accessible,,current,,A table that contains the statistics objects for the Authenticator PAE's associated with each shared-media  Port.
.1.3.6.1.4.1.11.2.14.11.5.1.25.1.2.4.1,HP-DOT1X-EXTENSIONS-MIB::hpicfDot1xAuthStatsEntry,,not-accessible,hpicfDot1xSMAuthPaePort:hpicfDot1xSMAuthMacAddr,current,,The statistics information for an Authenticator PAE.
.1.3.6.1.4.1.11.2.14.11.5.1.25.1.2.4.1.1,HP-DOT1X-EXTENSIONS-MIB::hpicfDot1xAuthEapolFramesRx,Counter32,read-only,,current,,The number of valid EAPOL frames of any type that have been received by this Authenticator.
.1.3.6.1.4.1.11.2.14.11.5.1.25.1.2.4.1.2,HP-DOT1X-EXTENSIONS-MIB::hpicfDot1xAuthEapolFramesTx,Counter32,read-only,,current,,The number of EAPOL frames of any type that have been transmitted by this Authenticator.
.1.3.6.1.4.1.11.2.14.11.5.1.25.1.2.4.1.3,HP-DOT1X-EXTENSIONS-MIB::hpicfDot1xAuthEapolStartFramesRx,Counter32,read-only,,current,,The number of EAPOL Start frames that have been received by this Authenticator.
.1.3.6.1.4.1.11.2.14.11.5.1.25.1.2.4.1.4,HP-DOT1X-EXTENSIONS-MIB::hpicfDot1xAuthEapolLogoffFramesRx,Counter32,read-only,,current,,The number of EAPOL Logoff frames that have been received by this Authenticator.
.1.3.6.1.4.1.11.2.14.11.5.1.25.1.2.4.1.5,HP-DOT1X-EXTENSIONS-MIB::hpicfDot1xAuthEapolRespIdFramesRx,Counter32,read-only,,current,,The number of EAP Resp/Id frames that have been received by this Authenticator.
.1.3.6.1.4.1.11.2.14.11.5.1.25.1.2.4.1.6,HP-DOT1X-EXTENSIONS-MIB::hpicfDot1xAuthEapolRespFramesRx,Counter32,read-only,,current,,The number of valid EAP Response frames (other than Resp/Id frames) that have been received by this Authenticator.
.1.3.6.1.4.1.11.2.14.11.5.1.25.1.2.4.1.7,HP-DOT1X-EXTENSIONS-MIB::hpicfDot1xAuthEapolReqIdFramesTx,Counter32,read-only,,current,,The number of EAP Req/Id frames that have been transmitted by this Authenticator.
.1.3.6.1.4.1.11.2.14.11.5.1.25.1.2.4.1.8,HP-DOT1X-EXTENSIONS-MIB::hpicfDot1xAuthEapolReqFramesTx,Counter32,read-only,,current,,The number of EAP Request frames (other than Rq/Id frames) that have been transmitted by this Authenticator.
.1.3.6.1.4.1.11.2.14.11.5.1.25.1.2.4.1.9,HP-DOT1X-EXTENSIONS-MIB::hpicfDot1xAuthInvalidEapolFramesRx,Counter32,read-only,,current,,The number of EAPOL frames that have been received by this Authenticator in which the frame type is not recognized.
.1.3.6.1.4.1.11.2.14.11.5.1.25.1.2.4.1.10,HP-DOT1X-EXTENSIONS-MIB::hpicfDot1xAuthEapLengthErrorFramesRx,Counter32,read-only,,current,,The number of EAPOL frames that have been received by this Authenticator in which the Packet Body Length field is invalid.
.1.3.6.1.4.1.11.2.14.11.5.1.25.1.2.4.1.11,HP-DOT1X-EXTENSIONS-MIB::hpicfDot1xAuthLastEapolFrameVersion,Unsigned32,read-only,,current,,The protocol version number carried in the most recently received EAPOL frame.
.1.3.6.1.4.1.11.2.14.11.5.1.25.1.2.4.1.12,HP-DOT1X-EXTENSIONS-MIB::hpicfDot1xAuthLastEapolFrameSource,OCTET,read-only,,current,,The source MAC address carried in the most recently received EAPOL frame.
.1.3.6.1.4.1.11.2.14.11.5.1.25.1.2.5,HP-DOT1X-EXTENSIONS-MIB::hpicfDot1xAuthSessionStatsTable,,not-accessible,,current,,A table that contains the session statistics objects for the Authenticator PAE's associated with each  shared-media Port.
.1.3.6.1.4.1.11.2.14.11.5.1.25.1.2.5.1,HP-DOT1X-EXTENSIONS-MIB::hpicfDot1xAuthSessionStatsEntry,,not-accessible,hpicfDot1xSMAuthPaePort:hpicfDot1xSMAuthMacAddr,current,,The session statistics information for an Authenticator PAE. This shows the current values being collected for each session that is still in progress, or the final values for the last valid session on each port where there is no session currently active.
.1.3.6.1.4.1.11.2.14.11.5.1.25.1.2.5.1.1,HP-DOT1X-EXTENSIONS-MIB::hpicfDot1xAuthSessionPerPAECountersEnabled,INTEGER,read-only,,current,true(1):false(2),Specifies whether individualized PAE octet and  frame counts are supported.  If TRUE then system is capable of maintaining  separate counter sets for each, of possibly many,  Authenticator PAE instance on a port. If FALSE then system is incapable of maintaining  separate counter sets. Frame and octet counter values  returned are an aggregate of all PAE sessions on the  port.
.1.3.6.1.4.1.11.2.14.11.5.1.25.1.2.5.1.2,HP-DOT1X-EXTENSIONS-MIB::hpicfDot1xAuthSessionOctetsRx,Counter64,read-only,,current,,The number of octets received in user data frames during the session.
.1.3.6.1.4.1.11.2.14.11.5.1.25.1.2.5.1.3,HP-DOT1X-EXTENSIONS-MIB::hpicfDot1xAuthSessionOctetsTx,Counter64,read-only,,current,,The number of octets transmitted in user data frames during the session.
.1.3.6.1.4.1.11.2.14.11.5.1.25.1.2.5.1.4,HP-DOT1X-EXTENSIONS-MIB::hpicfDot1xAuthSessionFramesRx,Counter32,read-only,,current,,The number of user data frames received during the session.
.1.3.6.1.4.1.11.2.14.11.5.1.25.1.2.5.1.5,HP-DOT1X-EXTENSIONS-MIB::hpicfDot1xAuthSessionFramesTx,Counter32,read-only,,current,,The number of user data frames transmitted during the session.
.1.3.6.1.4.1.11.2.14.11.5.1.25.1.2.5.1.6,HP-DOT1X-EXTENSIONS-MIB::hpicfDot1xAuthSessionId,OCTET,read-only,,current,,A unique identifier for the session, in the form of a printable ASCII string of at least three characters.
.1.3.6.1.4.1.11.2.14.11.5.1.25.1.2.5.1.7,HP-DOT1X-EXTENSIONS-MIB::hpicfDot1xAuthSessionAuthenticMethod,INTEGER,read-only,,current,remoteAuthServer(1):localAuthServer(2):localandremoteAuthServer(3),The authentication method used to establish the session.
.1.3.6.1.4.1.11.2.14.11.5.1.25.1.2.5.1.8,HP-DOT1X-EXTENSIONS-MIB::hpicfDot1xAuthSessionTime,TimeTicks,read-only,,current,,The duration of the session in seconds.
.1.3.6.1.4.1.11.2.14.11.5.1.25.1.2.5.1.9,HP-DOT1X-EXTENSIONS-MIB::hpicfDot1xAuthSessionStartTime,TimeTicks,read-only,,current,,This object contains the value of sysUpTime at the time Supplicant was successfully authenticated.
.1.3.6.1.4.1.11.2.14.11.5.1.25.1.2.5.1.10,HP-DOT1X-EXTENSIONS-MIB::hpicfDot1xAuthSessionStopTime,TimeTicks,read-only,,current,,This object contains the value of sysUpTime at the  time an authenticated Supplicant was de-authenticated, as a result of an EAPOL-Logoff, reauthentication period expiration, or forced asynchronous reauthentication.
.1.3.6.1.4.1.11.2.14.11.5.1.25.1.2.5.1.11,HP-DOT1X-EXTENSIONS-MIB::hpicfDot1xAuthSessionInactiveTime,TimeTicks,read-only,,current,,This time (in seconds) since last user data frames, either received or transmitted, were observed.
.1.3.6.1.4.1.11.2.14.11.5.1.25.1.2.5.1.12,HP-DOT1X-EXTENSIONS-MIB::hpicfDot1xAuthSessionTerminateCause,INTEGER,read-only,,current,supplicantLogoff(1):portFailure(2):supplicantRestart(3):reauthFailed(4):authControlForceUnauth(5):portReInit(6):portAdminDisabled(7):notTerminatedYet(999),The reason for the session termination.
.1.3.6.1.4.1.11.2.14.11.5.1.25.1.2.5.1.13,HP-DOT1X-EXTENSIONS-MIB::hpicfDot1xAuthSessionUserName,OCTET,read-only,,current,,The User-Name representing the identity of the Supplicant PAE.
.1.3.6.1.4.1.11.2.14.11.5.1.25.1.2.5.1.14,HP-DOT1X-EXTENSIONS-MIB::hpicfDot1xAuthSessionIsForwarding,INTEGER,read-only,,current,true(1):false(2),Specifies whether traffic originating from  Supplicant PAE is being forwarded by  Authenticator PAE.  If TRUE, then Authenticator is forwarding  Supplicant's traffic  If FALSE, then Authenticator is not forwarding (blocking) Supplicant's traffic.
.1.3.6.1.4.1.11.2.14.11.5.1.25.1.2.5.1.15,HP-DOT1X-EXTENSIONS-MIB::hpicfDot1xAuthSessionVid,Unsigned32,read-only,,current,,The PVID on which user data frames are being forwarded.
.1.3.6.1.4.1.11.2.14.11.5.1.25.1.2.6,HP-DOT1X-EXTENSIONS-MIB::hpicfDot1xAuthAllowGvrpVlans,INTEGER,read-write,,current,true(1):false(2),This object allows enable/disable the use of RADIUS-assigned dynamic (GVRP) VLANs.
.1.3.6.1.4.1.11.2.14.11.5.1.25.1.2.7,HP-DOT1X-EXTENSIONS-MIB::hpicfDot1xAuthCachedReauthDelay,Unsigned32,read-write,,current,,The value indicates the period in seconds, during which all reauthentications will be suppressed after a cached reauthentication.
.1.3.6.1.4.1.11.2.14.11.5.1.25.1.3,HP-DOT1X-EXTENSIONS-MIB::hpicfDot1xSupplicant,,,,,,
.1.3.6.1.4.1.11.2.14.11.5.1.25.1.3.1,HP-DOT1X-EXTENSIONS-MIB::hpicfDot1xSuppConfigTable,,not-accessible,,current,,This table supplements the 'dot1xSuppConfigTable'.
.1.3.6.1.4.1.11.2.14.11.5.1.25.1.3.1.1,HP-DOT1X-EXTENSIONS-MIB::hpicfDot1xSuppConfigEntry,,not-accessible,,current,,The fields in these entries will be used to supplement 'dot1xSuppConfigEntry'.
.1.3.6.1.4.1.11.2.14.11.5.1.25.1.3.1.1.1,HP-DOT1X-EXTENSIONS-MIB::hpicfDot1xSuppConfigIdentity,OCTET,read-write,,current,,This object can be used to set/get the identity 802.1x supplicant supplies to its authenticator.
.1.3.6.1.4.1.11.2.14.11.5.1.25.1.3.1.1.2,HP-DOT1X-EXTENSIONS-MIB::hpicfDot1xSuppConfigPassword,OCTET,read-write,,current,,This object can be used to set the password  the supplicant uses for MD5 authentication.
.1.3.6.1.4.1.11.2.14.11.5.1.25.1.3.1.1.3,HP-DOT1X-EXTENSIONS-MIB::hpicfDot1xSuppConfigPasswordEncrypted,OCTET,read-write,,current,,The encrypted form of the password used by  supplicant for MD5 authentication. This object may only be read or written when  hpSwitchAuthenticationEncryptCredentialsMethod  is set to a value other than none(0). At most  one of hpicfDot1xSuppConfigPassword and hpicfDot1xSuppConfigPasswordEncrypted may be set in any transaction. This object should only be written with an encrypted password previously read from a compatible HP Networking device.
.1.3.6.1.4.1.11.2.14.11.5.1.25.2,HP-DOT1X-EXTENSIONS-MIB::hpicfDot1xConformance,,,,,,
.1.3.6.1.4.1.11.2.14.11.5.1.25.2.1,HP-DOT1X-EXTENSIONS-MIB::hpicfDot1xGroups,,,,,,
.1.3.6.1.4.1.11.2.14.11.5.1.25.2.1.1,HP-DOT1X-EXTENSIONS-MIB::hpicfDot1xPaePortGroup,,,,,,A collection of objects providing basic administrative control over Authenticator PAE and Supplicant PAE in  system.
.1.3.6.1.4.1.11.2.14.11.5.1.25.2.1.2,HP-DOT1X-EXTENSIONS-MIB::hpicfDot1xAuthConfigGroup,,,,,,********* THIS GROUP IS DEPRECATED ********* A collection of objects providing basic configuration control of over Authenticator PAEs.
.1.3.6.1.4.1.11.2.14.11.5.1.25.2.1.3,HP-DOT1X-EXTENSIONS-MIB::hpicfDot1xSMAuthConfigGroup,,,,,,A collection of objects providing basic status and  configuration control over Authenticator PAEs running on a shared-media port.
.1.3.6.1.4.1.11.2.14.11.5.1.25.2.1.4,HP-DOT1X-EXTENSIONS-MIB::hpicfDot1xAuthDiagGroup,,,,,,A collection of objects providing basic diagnostic Information over Authenticator PAEs.
.1.3.6.1.4.1.11.2.14.11.5.1.25.2.1.5,HP-DOT1X-EXTENSIONS-MIB::hpicfDot1xAuthStatsGroup,,,,,,A collection of objects providing statistics about  Authenticator PAEs running on a shared-media port.
.1.3.6.1.4.1.11.2.14.11.5.1.25.2.1.6,HP-DOT1X-EXTENSIONS-MIB::hpicfDot1xAuthSessionStatsGroup,,,,,,A collection of objects providing statistics about the current, or last sessions for Authenticator PAEs running  on a shared-media port.
.1.3.6.1.4.1.11.2.14.11.5.1.25.2.1.7,HP-DOT1X-EXTENSIONS-MIB::hpicfDot1xAuthConfigGroup2,,,,,,A collection of objects providing basic configuration control of over Authenticator PAEs.
.1.3.6.1.4.1.11.2.14.11.5.1.25.2.1.8,HP-DOT1X-EXTENSIONS-MIB::hpicfDot1xAuthConfigGroup3,,,,,,A collection of objects providing basic configuration control of over Authenticator PAEs.
.1.3.6.1.4.1.11.2.14.11.5.1.25.2.1.9,HP-DOT1X-EXTENSIONS-MIB::hpicfDot1xAuthConfigGroup4,,,,,,A collection of objects providing basic configuration control of over Authenticator PAEs.
.1.3.6.1.4.1.11.2.14.11.5.1.25.2.1.10,HP-DOT1X-EXTENSIONS-MIB::hpicfDot1xAuthConfigGroup5,,,,,,A collection of objects providing basic configuration control of over Authenticator PAEs.
.1.3.6.1.4.1.11.2.14.11.5.1.25.2.1.11,HP-DOT1X-EXTENSIONS-MIB::hpicfDot1xSuppConfigGroup,,,,,,A collection of objects providing basic configuration of the 802.1x supplicant.
.1.3.6.1.4.1.11.2.14.11.5.1.25.2.1.12,HP-DOT1X-EXTENSIONS-MIB::hpicfDot1xPaeAuthSessionGroup,,,,,,A collection of Dot1x objects .
.1.3.6.1.4.1.11.2.14.11.5.1.25.2.1.13,HP-DOT1X-EXTENSIONS-MIB::hpicfDot1xSMAuthSessionTimeoutGroup,,,,,,A collection of objects providing RADIUS server set session timeout for user reauthentication
.1.3.6.1.4.1.11.2.14.11.5.1.25.2.2,HP-DOT1X-EXTENSIONS-MIB::hpicfDot1xCompliances,,,,,,
.1.3.6.1.4.1.11.2.14.11.5.1.25.2.2.1,HP-DOT1X-EXTENSIONS-MIB::hpicfDot1xCompliance,,,,,,********* THIS COMPLIANCE IS DEPRECATED ********* The compliance statement for devices support of HP IEEE 802.1X extensions MIB.
.1.3.6.1.4.1.11.2.14.11.5.1.25.2.2.2,HP-DOT1X-EXTENSIONS-MIB::hpicfDot1xCompliance2,,,,,,********* THIS COMPLIANCE IS DEPRECATED ********* The compliance statement for devices support of HP IEEE 802.1X extensions MIB.
.1.3.6.1.4.1.11.2.14.11.5.1.25.2.2.3,HP-DOT1X-EXTENSIONS-MIB::hpicfDot1xCompliance3,,,,,,********* THIS COMPLIANCE IS DEPRECATED ********* The compliance statement for devices support of HP IEEE 802.1X extensions MIB.
.1.3.6.1.4.1.11.2.14.11.5.1.25.2.2.4,HP-DOT1X-EXTENSIONS-MIB::hpicfDot1xCompliance4,,,,,,********* THIS COMPLIANCE IS DEPRECATED ********* The compliance statement for devices support of HP IEEE 802.1X extensions MIB.
.1.3.6.1.4.1.11.2.14.11.5.1.25.2.2.5,HP-DOT1X-EXTENSIONS-MIB::hpicfDot1xCompliance5,,,,,,The compliance statement for devices support of HP IEEE 802.1X extensions MIB.
.1.3.6.1.4.1.11.2.14.11.5.1.25.2.2.6,HP-DOT1X-EXTENSIONS-MIB::hpicfDot1xCompliance6,,,,,,The compliance statement for devices support of HP IEEE 802.1X extensions MIB.
.1.3.6.1.4.1.11.2.14.11.5.1.25.2.2.7,HP-DOT1X-EXTENSIONS-MIB::hpicfDot1xCompliance7,,,,,,The compliance statement for devices support of HP IEEE 802.1X extensions MIB.
.1.3.6.1.4.1.11.2.14.11.5.1.25.2.2.8,HP-DOT1X-EXTENSIONS-MIB::hpicfDot1xCompliance8,,,,,,The compliance statement for devices support of HP IEEE 802.1X extensions MIB.
.1.3.6.1.4.1.11.2.14.11.5.1.31,HP-ICF-OID::hpicfVrrpMIB,,,,,,
.1.3.6.1.4.1.11.2.14.11.5.1.31.1,HP-ICF-VRRP-MIB::hpicfVrrpOperations,,,,,,
.1.3.6.1.4.1.11.2.14.11.5.1.31.1.1,HP-ICF-VRRP-MIB::hpicfVrrpAdminStatus,INTEGER,read-write,,current,true(1):false(2),When set to TRUE, this enables VRRP globally on the router. If set to FALSE, this would disable VRRP. Default is FALSE.
.1.3.6.1.4.1.11.2.14.11.5.1.31.1.2,HP-ICF-VRRP-MIB::hpicfVrrpOperTable,,not-accessible,,current,,HP extensions to the vrrpOperTable (RFC 2787).
.1.3.6.1.4.1.11.2.14.11.5.1.31.1.2.1,HP-ICF-VRRP-MIB::hpicfVrrpOperEntry,,not-accessible,,current,,HP extensions for an entry in the vrrpOperTable.
.1.3.6.1.4.1.11.2.14.11.5.1.31.1.2.1.1,HP-ICF-VRRP-MIB::hpicfVrrpVrMode,INTEGER,read-create,,current,owner(1):backup(2):uninitialized(3),This object denotes whether this VR has been designated as an owner or as a backup. On VR  creation, this field is set to uninitialized.  The user cannot set the value of this object to  uninitialized.
.1.3.6.1.4.1.11.2.14.11.5.1.31.1.2.1.2,HP-ICF-VRRP-MIB::hpicfVrrpVrMasterPreempt,INTEGER,read-create,,current,true(1):false(2),This object, when set to TRUE, would enable the  Master Preemption mode wherein a virtual router  even though an owner will not preempt a lower  priority Backup.
.1.3.6.1.4.1.11.2.14.11.5.1.31.1.2.1.3,HP-ICF-VRRP-MIB::hpicfVrrpVrTransferControl,INTEGER,read-create,,current,true(1):false(2),This object, when set to TRUE, would serve as  trigger to enable a virtual router owner to take control of its IP address. When this value is read  it always returns FALSE.
.1.3.6.1.4.1.11.2.14.11.5.1.31.1.2.1.4,HP-ICF-VRRP-MIB::hpicfVrrpVrPreemptDelayTime,Integer32,read-create,,current,,This object specifies the time that the owner  virtual router will wait before taking control of  its virtual IP address. A value of 0 indicates  that the pre-empt delay timer is not active
.1.3.6.1.4.1.11.2.14.11.5.1.31.1.2.1.5,HP-ICF-VRRP-MIB::hpicfVrrpVrControl,INTEGER,read-create,,current,failback(1):failover(2):failoverWithMonitoring(3):invalid(4),When this object is set to failback (1), it acts as a trigger to intimate VRRP to failback to this router from another. When this object is set to failover (2), it acts as a trigger to intimate VRRP to failover from this router to another. When this object is set to failoverWithMonitoring (3), in addition to triggering VRRP to failover, it triggers VR to monitor for presence of a master. When read, this object always returns invalid (4).
.1.3.6.1.4.1.11.2.14.11.5.1.31.1.2.1.6,HP-ICF-VRRP-MIB::hpicfVrrpVrRespondToPing,INTEGER,read-create,,current,true(1):false(2),If set to FALSE, prevents a response to ping requests to  the virtual router IP addresses configured on the backup router. If set to TRUE allows response to ping requests to virtual IP addresses configured when virtual router  become master. hpicfVrrpRespondToPing must also be configured globally to respond to virtual IP ping  requests. By default hpicfVrrpVrRespondToPing is enabled.
.1.3.6.1.4.1.11.2.14.11.5.1.31.1.3,HP-ICF-VRRP-MIB::hpicfVrrpAssoIpAddrTable,,not-accessible,,current,,HP extensions to the vrrpAssoIpAddrTable (RFC 2787).
.1.3.6.1.4.1.11.2.14.11.5.1.31.1.3.1,HP-ICF-VRRP-MIB::hpicfVrrpAssoIpAddrEntry,,not-accessible,,current,,HP extensions for an entry in the vrrpAssoIpAddrTable.
.1.3.6.1.4.1.11.2.14.11.5.1.31.1.3.1.1,HP-ICF-VRRP-MIB::hpicfVrrpAssoIpMask,IpAddress,read-create,,current,,The subnet mask to be used in conjunction with the 'vrrpAssoIpAddr' object to uniquely identify  a subnet.
.1.3.6.1.4.1.11.2.14.11.5.1.31.1.5,HP-ICF-VRRP-MIB::hpicfVrrpTrackTable,,not-accessible,,current,,HP extensions for supporting tracking.
.1.3.6.1.4.1.11.2.14.11.5.1.31.1.5.1,HP-ICF-VRRP-MIB::hpicfVrrpTrackEntry,,not-accessible,ifIndex:vrrpOperVrId:hpicfVrrpVrTrackType:hpicfVrrpVrTrackEntity,current,,HP extensions for supporting tracking.
.1.3.6.1.4.1.11.2.14.11.5.1.31.1.5.1.1,HP-ICF-VRRP-MIB::hpicfVrrpVrTrackType,INTEGER,not-accessible,,current,port(1):trunk(2):vlan(3),This object specifies the type of interface specified by 'hpicfVrrpVrTrackEntity'.
.1.3.6.1.4.1.11.2.14.11.5.1.31.1.5.1.2,HP-ICF-VRRP-MIB::hpicfVrrpVrTrackEntity,OCTET,not-accessible,,current,,This object specifies interface details. Interface detail is interpreted Based on type specified by 'hpicfVrrpVrTrackType'. Valid values for different track types are - ------------------------------------ hpicfVrrpVrTrackType range ------------------------------------ port '1'..'65535' trunk '1'..'65535' vlan '1'..'65535' ------------------------------------
.1.3.6.1.4.1.11.2.14.11.5.1.31.1.5.1.3,HP-ICF-VRRP-MIB::hpicfVrrpTrackRowStatus,INTEGER,read-create,,current,active(1):notInService(2):notReady(3):createAndGo(4):createAndWait(5):destroy(6),The row status of given track entity.
.1.3.6.1.4.1.11.2.14.11.5.1.31.1.6,HP-ICF-VRRP-MIB::hpicfVrrpStatsTable,,not-accessible,,current,,Table of virtual router statistics.
.1.3.6.1.4.1.11.2.14.11.5.1.31.1.6.1,HP-ICF-VRRP-MIB::hpicfVrrpStatsEntry,,not-accessible,,current,,An entry in the table, containing statistics information about a given virtual router.
.1.3.6.1.4.1.11.2.14.11.5.1.31.1.6.1.1,HP-ICF-VRRP-MIB::hpicfVrrpStatsNearFailovers,Counter32,read-only,,current,,This object reports the number of near failovers for backup virtual routers. A near failover occurs when a backup virtual router has not received an  advertisement packet from the master virtual router for two advertisement intervals.
.1.3.6.1.4.1.11.2.14.11.5.1.31.1.7,HP-ICF-VRRP-MIB::hpicfVrrpRespondToPing,INTEGER,read-write,,current,true(1):false(2),If this object is set to FALSE globally, it prevents a response to ping requests to the virtual router IP  addresses configured on all backup routers.If set to TRUE,  allows response to ping requests to virtual IP addresses  configured on backup virtual routers when they become  master. hpicfVrrpVrRespondToPing object must also be configured  on a Virtual router to respond to virtual IP ping requests. By default hpicfVrrpRespondToPing is disabled.
.1.3.6.1.4.1.11.2.14.11.5.1.31.1.8,HP-ICF-VRRP-MIB::hpicfVrrpRemoveConfig,INTEGER,read-write,,current,true(1):false(2),This objects clears all existing vrrp configuration and again intializes it with default values when this is set with value 'true'. It also clears (disables) the global VRRP enable flag. SnmpGet on this will always return false.
.1.3.6.1.4.1.11.2.14.11.5.1.31.1.9,HP-ICF-VRRP-MIB::hpicfVrrpNonstop,INTEGER,read-write,,current,true(1):false(2),This object defines the operation of VRRP on redundant platforms. When set to TRUE, the VRRP Master router will retain control of virtual-IP addresses across a management card failure on redundant platforms. When set to FALSE, the VRRP Backup router will take control of virtual-IP addresses on the network on the occurrence of a  management card failure on the Master VRRP router.
.1.3.6.1.4.1.11.2.14.11.5.1.31.2,HP-ICF-VRRP-MIB::hpicfVrrpConformance,,,,,,
.1.3.6.1.4.1.11.2.14.11.5.1.31.2.1,HP-ICF-VRRP-MIB::hpicfVrrpMIBCompliances,,,,,,
.1.3.6.1.4.1.11.2.14.11.5.1.31.2.1.1,HP-ICF-VRRP-MIB::hpicfVrrpMIBCompliance,,,,,,The compliance statement for HP routers running VRRP (RFC 3768) and implementing the HP-ICF-VRRP-MIB.
.1.3.6.1.4.1.11.2.14.11.5.1.31.2.1.2,HP-ICF-VRRP-MIB::hpicfVrrpMIBCompliance1,,,,,,The compliance statement for HP routers running VRRP (RFC 3768) and implementing the HP-ICF-VRRP-MIB.
.1.3.6.1.4.1.11.2.14.11.5.1.31.2.1.3,HP-ICF-VRRP-MIB::hpicfVrrpMIBCompliance2,,,,,,Support for this group is required for HP backup routers to respond to ping request.
.1.3.6.1.4.1.11.2.14.11.5.1.31.2.1.4,HP-ICF-VRRP-MIB::hpicfVrrpMIBCompliance3,,,,,,Support for this group is required for HP routers that supports non-stop vrrp.
.1.3.6.1.4.1.11.2.14.11.5.1.31.2.1.5,HP-ICF-VRRP-MIB::hpicfVrrpMIBCompliance4,,,,,,Support for this group is required for HP routers that supports non-stop vrrp.
.1.3.6.1.4.1.11.2.14.11.5.1.31.2.2,HP-ICF-VRRP-MIB::hpicfVrrpMIBGroups,,,,,,
.1.3.6.1.4.1.11.2.14.11.5.1.31.2.2.1,HP-ICF-VRRP-MIB::hpicfVrrpOperGroup,,,,,,A collection of HP proprietary objects to support  VRRP configuration on HP routers.
.1.3.6.1.4.1.11.2.14.11.5.1.31.2.2.2,HP-ICF-VRRP-MIB::hpicfVrrpTrackGroup,,,,,,A collection of HP proprietary objects to support  VRRP configuration on HP routers.
.1.3.6.1.4.1.11.2.14.11.5.1.31.2.2.3,HP-ICF-VRRP-MIB::hpicfVrrpVrPingGroup,,,,,,A HP proprietary object to support VRRP Virtual IP Ping on a backup router.
.1.3.6.1.4.1.11.2.14.11.5.1.31.2.2.4,HP-ICF-VRRP-MIB::hpicfVrrpNonstopGroup,,,,,,A HP proprietary object to support nonstop VRRP on HP routers.
.1.3.6.1.4.1.11.2.14.11.5.1.31.2.2.5,HP-ICF-VRRP-MIB::hpicfVrrpOperationsGroup,,,,,,A HP proprietary object to support nonstop VRRP on HP routers.
.1.3.6.1.4.1.11.2.14.11.5.1.32,HP-ICF-OID::hpSwitchAuthorizationMIB,,,,,,
.1.3.6.1.4.1.11.2.14.11.5.1.32.0,HP-AUTZ-MIB::hpicfSwitchAuthorizationNotifications,,,,,,
.1.3.6.1.4.1.11.2.14.11.5.1.32.0.1,HP-AUTZ-MIB::hpicfSwitchAuthServerFail,,,,,,This notification indicates that the specified server is not reachable.
.1.3.6.1.4.1.11.2.14.11.5.1.32.1,HP-AUTZ-MIB::hpSwitchAuthorizationConfig,,,,,,
.1.3.6.1.4.1.11.2.14.11.5.1.32.1.1,HP-AUTZ-MIB::hpSwitchAutzServiceTable,,not-accessible,,current,,The (conceptual) table listing the authorization service types.
.1.3.6.1.4.1.11.2.14.11.5.1.32.1.1.1,HP-AUTZ-MIB::hpSwitchAutzServiceEntry,,not-accessible,hpSwitchAutzServiceType,current,,An entry (conceptual row) in the hpSwitchAutzServiceTable.
.1.3.6.1.4.1.11.2.14.11.5.1.32.1.1.1.1,HP-AUTZ-MIB::hpSwitchAutzServiceType,INTEGER,not-accessible,,current,commands(1):exec(2):network(3):restUri(4),Signifies the authorization service type for which this entry contains configuration information.
.1.3.6.1.4.1.11.2.14.11.5.1.32.1.1.1.2,HP-AUTZ-MIB::hpSwitchAutzServicePrimaryMethod,INTEGER,read-write,,current,local(1):tacacs(2):radius(3):none(4):auto(5),The primary method used for authorization. This object can be set only when the authorization service type is command. A value of local (1) indicates that authorization is performed locally. A value of tacacs (2) indicates that authorization is performed using TACACS+. A value of radius (3) indicates that authorization is performed using RADIUS. A value of none (4) indicates that authorization is not performed. A value of auto (5) indicates that authorization is performed by the same protocol that is configured for authentication.
.1.3.6.1.4.1.11.2.14.11.5.1.32.1.1.1.3,HP-AUTZ-MIB::hpSwitchAutzServiceSecondaryMethod,INTEGER,read-write,,current,local(1):none(2),Specifies the secondary (backup) method used for authorization.
.1.3.6.1.4.1.11.2.14.11.5.1.32.1.1.1.4,HP-AUTZ-MIB::hpSwitchAutzServiceCommandsLevel,INTEGER,read-write,,current,all(1):managerlevelonly(2),This object specifies the command level that requires authorization. A value of all (1) indicates that authorization is required for all commands. A value of managerLevelOnly (2) indicates that the authorization is required only for manager level commands. This object is only valid when the value of hpSwitchAutzServiceType is 'commands'. The default is 'all'.
.1.3.6.1.4.1.11.2.14.11.5.1.32.1.2,HP-AUTZ-MIB::hpicfSwitchAuthObjects,,,,,,
.1.3.6.1.4.1.11.2.14.11.5.1.32.1.2.1,HP-AUTZ-MIB::hpicfSwitchAuthServerType,INTEGER,accessible-for-notify,,current,radius(1):tacacs(2):other(9),Authorization server type reported in hpicfSwitchAuthorization notifications.
.1.3.6.1.4.1.11.2.14.11.5.1.32.1.2.2,HP-AUTZ-MIB::hpicfSwitchAuthServerIPType,INTEGER,accessible-for-notify,,current,unknown(0):ipv4(1):ipv6(2):ipv4z(3):ipv6z(4):dns(16),InetAddressType of the address reported in hpicfSwitchAuthServerIP.
.1.3.6.1.4.1.11.2.14.11.5.1.32.1.2.3,HP-AUTZ-MIB::hpicfSwitchAuthServerIP,OCTET,accessible-for-notify,,current,,This object is used in an hpicfSwitchAuthorizationNotification to report the IP address of the affected server.
.1.3.6.1.4.1.11.2.14.11.5.1.32.1.3,HP-AUTZ-MIB::hpSwitchAuthConfigObjects,,,,,,
.1.3.6.1.4.1.11.2.14.11.5.1.32.1.3.1,HP-AUTZ-MIB::hpicfSwitchAuthServerNotifyEnable,INTEGER,read-write,,current,enabled(1):disabled(2),The operational status of hpicfSwitchAuthServerFail notifications. The default value is 1 (Enabled). A value of 2 represents Disabled. Writing this object requires authentication, such as provided by SNMPv3.
.1.3.6.1.4.1.11.2.14.11.5.1.32.1.4,HP-AUTZ-MIB::hpSwitchAuthLocalPrivConfigObjects,,,,,,
.1.3.6.1.4.1.11.2.14.11.5.1.32.1.4.1,HP-AUTZ-MIB::hpSwitchLocalMgmtPrivGroupsTable,,not-accessible,,current,,This table lists the local management privilege group names.
.1.3.6.1.4.1.11.2.14.11.5.1.32.1.4.1.1,HP-AUTZ-MIB::hpSwitchLocalMgmtPrivGroupsEntry,,not-accessible,hpSwitchLocalMgmtPrivGroupIndex,current,,Local Management Groups entry.
.1.3.6.1.4.1.11.2.14.11.5.1.32.1.4.1.1.1,HP-AUTZ-MIB::hpSwitchLocalMgmtPrivGroupIndex,Integer32,not-accessible,,current,,The index value which uniquely identifies a row in the group table. The values, One (1) is reserved for a predefined manager group, Two (2) is reserved for usernames that are not assigned to a group. The privileges for usernames that do not have a group assignment is the same as operator'. 
.1.3.6.1.4.1.11.2.14.11.5.1.32.1.4.1.1.2,HP-AUTZ-MIB::hpSwitchLocalMgmtPrivGroupName,OCTET,read-create,,current,,The name of a given Local Management server group.
.1.3.6.1.4.1.11.2.14.11.5.1.32.1.4.1.1.3,HP-AUTZ-MIB::hpSwitchLocalMgmtPrivGroupStatus,INTEGER,read-create,,current,active(1):notInService(2):notReady(3):createAndGo(4):createAndWait(5):destroy(6),The status of the local management privilege group row.
.1.3.6.1.4.1.11.2.14.11.5.1.32.1.4.2,HP-AUTZ-MIB::hpSwitchLocalMgmtPrivCommandsTable,,not-accessible,,current,,This table lists the local management Privilege Command Match strings.
.1.3.6.1.4.1.11.2.14.11.5.1.32.1.4.2.1,HP-AUTZ-MIB::hpSwitchLocalMgmtPrivCommandsEntry,,not-accessible,hpSwitchLocalMgmtPrivGroupIndex:hpSwitchLocalMgmtPrivCmdSequenceIndex,current,,Local Management Commands entry.
.1.3.6.1.4.1.11.2.14.11.5.1.32.1.4.2.1.1,HP-AUTZ-MIB::hpSwitchLocalMgmtPrivCmdSequenceIndex,Integer32,not-accessible,,current,,The index value which uniquely identifies a row in the command table. See the documentation for the number of sequences allowed.
.1.3.6.1.4.1.11.2.14.11.5.1.32.1.4.2.1.2,HP-AUTZ-MIB::hpSwitchLocalMgmtPrivCmdMatchStr,OCTET,read-create,,current,,The syntax of a command within a group. See the documentation for the maximum length of the command name.
.1.3.6.1.4.1.11.2.14.11.5.1.32.1.4.2.1.3,HP-AUTZ-MIB::hpSwitchLocalMgmtPrivCmdPriv,INTEGER,read-create,,current,permit(1):deny(2),The privilege associated with commands that match the command string.
.1.3.6.1.4.1.11.2.14.11.5.1.32.1.4.2.1.4,HP-AUTZ-MIB::hpSwitchLocalMgmtPrivCmdSendLog,INTEGER,read-create,,current,enable(1):disable(2),Determines if a log message is generated when commands matching this command string are attempted.
.1.3.6.1.4.1.11.2.14.11.5.1.32.1.4.2.1.5,HP-AUTZ-MIB::hpSwitchLocalMgmtPrivCmdStatus,INTEGER,read-create,,current,active(1):notInService(2):notReady(3):createAndGo(4):createAndWait(5):destroy(6),The status of the local management privilege command row.
.1.3.6.1.4.1.11.2.14.11.5.1.32.1.5,HP-AUTZ-MIB::hpSwitchAutzUserRole,,,,,,
.1.3.6.1.4.1.11.2.14.11.5.1.32.1.5.1,HP-AUTZ-MIB::hpSwitchAutzUserRoleEnabled,INTEGER,read-write,,current,true(1):false(2),Enable user role-based authorization. When enabled, authenticated clients are assigned roles that determine authorization level. When disabled, roles are not used.
.1.3.6.1.4.1.11.2.14.11.5.1.32.1.5.2,HP-AUTZ-MIB::hpSwitchAutzUserRoleInitialRoleName,OCTET,read-write,,current,,The value of this object must match the hpSwitchAutzUserRoleName of an entry in the hpSwithcAutzUserRoleTable.
.1.3.6.1.4.1.11.2.14.11.5.1.32.1.5.3,HP-AUTZ-MIB::hpSwitchAutzUserRoleTable,,not-accessible,,current,,A table of configured user roles. The maximum number of entries is implementation dependent.
.1.3.6.1.4.1.11.2.14.11.5.1.32.1.5.3.1,HP-AUTZ-MIB::hpSwitchAutzUserRoleEntry,,not-accessible,hpSwitchAutzUserRoleName,current,,A user role table entry.
.1.3.6.1.4.1.11.2.14.11.5.1.32.1.5.3.1.1,HP-AUTZ-MIB::hpSwitchAutzUserRoleName,OCTET,not-accessible,,current,,The name of this user role.
.1.3.6.1.4.1.11.2.14.11.5.1.32.1.5.3.1.2,HP-AUTZ-MIB::hpSwitchAutzUserRoleRowStatus,INTEGER,read-create,,current,active(1):notInService(2):notReady(3):createAndGo(4):createAndWait(5):destroy(6),The Row Status of this entry. To create a new entry, send an SNMP SET request with a RowStatus of 'createAndGo'. active - the entry is ready to use. notInService - not valid for this table. notReady - the entry is not fully configured. createAndGo - create a new entry. Entries of hpSwitchAutzUserRoleType 'downloaded' cannot be created or modified. createAndWait - not valid for this table. delete - delete the entry. Entries of hpSwitchAutzUserRoleType 'predefined' and the entry assigned to hpSwitchAutzUserRoleInitialRoleName cannot be deleted.
.1.3.6.1.4.1.11.2.14.11.5.1.32.1.5.3.1.3,HP-AUTZ-MIB::hpSwitchAutzUserRoleType,INTEGER,read-only,,current,predefined(1):local(2):downloaded(3),This object defines different user role types supported. Predefined user roles cannot be modified or deleted. Downloaded user roles cannot be modified or created.
.1.3.6.1.4.1.11.2.14.11.5.1.32.1.5.3.1.4,HP-AUTZ-MIB::hpSwitchAutzUserRoleCaptivePortalProfileName,OCTET,read-create,,current,,The name of the captive portal profile (hpicfUsrAuthCaptivePortalProfileName) associated with this role. All printable ASCII characters are allowed except '.', ' ', and '~'.
.1.3.6.1.4.1.11.2.14.11.5.1.32.1.5.3.1.5,HP-AUTZ-MIB::hpSwitchAutzUserRoleIngressUserPolicyName,OCTET,read-create,,current,,The name associated with hpicfGppcv2NpPolicyName of hpicfGppcv2NpSubType 'policyUser' assigned to this role.
.1.3.6.1.4.1.11.2.14.11.5.1.32.1.5.3.1.6,HP-AUTZ-MIB::hpSwitchAutzUserRoleReauthPeriod,Integer32,read-create,,current,,Specifies the period, in seconds, at which an authenticated client must re-authenticate. A value of 0 signifies that an authenticated client will never have to re-authenticate.
.1.3.6.1.4.1.11.2.14.11.5.1.32.1.5.3.1.7,HP-AUTZ-MIB::hpSwitchAutzUserRoleVlanId,Unsigned32,read-create,,current,,The untagged VLAN ID for this role. A value of 0 indicates unset. This column is mutually exclusive with hpSwitchAutzUserRoleVlanName.
.1.3.6.1.4.1.11.2.14.11.5.1.32.1.5.3.1.8,HP-AUTZ-MIB::hpSwitchAutzUserRoleVlanName,OCTET,read-create,,current,,The untagged VLAN name for this role. This column is mutually exclusive with hpSwitchAutzUserRoleVlanId.
.1.3.6.1.4.1.11.2.14.11.5.1.32.1.5.3.1.9,HP-AUTZ-MIB::hpSwitchAutzUserRoleTunneledNodeServerRedirect,INTEGER,read-create,,current,enable(1):disable(2),Enables or disables the traffic redirection to the tunnel. If the MIB object 'hpSwitchAutzUserRoleCaptivePortalProfileName' is already enabled and an attempt is made to enable this object, it will result in an error. The MIB object can be enabled only if there is a tagged or  untagged VLAN present in the user role.
.1.3.6.1.4.1.11.2.14.11.5.1.32.1.5.3.1.10,HP-AUTZ-MIB::hpSwitchAutzUserRoleTunneledNodeServerSecondaryRole,OCTET,read-create,,current,,The secondary role associated with this user role. This will be applied to user traffic at tunnel-node server end. All printable ASCII characters are allowed except '.', ' ' and '~'. This object returns an error if the secondary role name is greater than 63 characters.
.1.3.6.1.4.1.11.2.14.11.5.1.32.1.5.3.1.11,HP-AUTZ-MIB::hpSwitchAutzUserRoleTaggedVlanId,Unsigned32,read-create,,deprecated,,The tagged VLAN ID for this role. A value of 0 indicates unset. This column is mutually exclusive with hpSwitchAutzUserRoleTaggedVlanName,.
.1.3.6.1.4.1.11.2.14.11.5.1.32.1.5.3.1.12,HP-AUTZ-MIB::hpSwitchAutzUserRoleTaggedVlanName,OCTET,read-create,,current,,The tagged VLAN name for this role. This column is mutually exclusive with hpSwitchAutzUserRoleTaggedVlanId.
.1.3.6.1.4.1.11.2.14.11.5.1.32.1.5.3.1.13,HP-AUTZ-MIB::hpSwitchAutzUserRoleTunneledNodeServerDownloadableRole,INTEGER,read-create,,current,true(1):false(2),This object indicates if the secondary roles is  downloadable user role or not.The  hpSwitchAutzUserRoleTunneledNodeServerRedirectobject  should be enabled before configuring this object.
.1.3.6.1.4.1.11.2.14.11.5.1.32.1.5.3.1.14,HP-AUTZ-MIB::hpSwitchAutzUserRoleLogOffPeriod,Integer32,read-create,,current,,Specifies the period, in seconds, at which an authenticated client must automatically log-off. A value of 0 signifies that an authenticated client will never have to automatically log-off.
.1.3.6.1.4.1.11.2.14.11.5.1.32.1.5.3.1.15,HP-AUTZ-MIB::hpSwitchAutzUserRoleCachedReauthPeriod,Unsigned32,read-create,,current,,The value indicates the period in seconds, during which cached reauthentication is allowed on the port. A value
.1.3.6.1.4.1.11.2.14.11.5.1.32.1.5.3.1.16,HP-AUTZ-MIB::hpSwitchAutzUserRoleTaggedVlanList,OCTET,read-create,,current,,The set of tagged VLANs associated with this user-role.
.1.3.6.1.4.1.11.2.14.11.5.1.32.1.5.4,HP-AUTZ-MIB::hpSwitchAutzUserRoleDownloadedEnabled,INTEGER,read-write,,current,true(1):false(2),This object enables or disables the downlodable user role feature. The hpSwitchAutzUserRoleEnabled object should be enabled before configuring this object.
.1.3.6.1.4.1.11.2.14.11.5.1.32.1.5.5,HP-AUTZ-MIB::hpSwitchAutzUserRoleSubTable,,not-accessible,,current,,A table of configured sub user roles attributes. The maximum number of entries is implementation dependent.
.1.3.6.1.4.1.11.2.14.11.5.1.32.1.5.5.1,HP-AUTZ-MIB::hpSwitchAutzUserRoleSubEntry,,not-accessible,hpSwitchAutzUserRoleName:hpSwitchAutzUserRoleSubType,current,,A user role sub table entry.
.1.3.6.1.4.1.11.2.14.11.5.1.32.1.5.5.1.1,HP-AUTZ-MIB::hpSwitchAutzUserRoleSubType,INTEGER,not-accessible,,current,device(1),This object specifies the sub type of user-role attributes. Device or other specific type.
.1.3.6.1.4.1.11.2.14.11.5.1.32.1.5.5.1.2,HP-AUTZ-MIB::hpSwitchAutzUserRoleAdminEdgePort,INTEGER,read-create,,current,true(1):false(2),The administrative value of the Edge Port parameter. A value of true(1) indicates that the port associated with this user-role should be assumed as an edge-port,  and a value of false(2) indicates that the port  associated with this user-role should be assumed as a non-edge-port.
.1.3.6.1.4.1.11.2.14.11.5.1.32.1.5.5.1.3,HP-AUTZ-MIB::hpSwitchAutzUserRolePoePriority,INTEGER,read-create,,current,default(0):critical(1):high(2):low(3),This object controls the priority of the port from the point of view of a power management algorithm. The priority that is set by this variable could be used by a control mechanism that prevents over current situations by disconnecting first ports with lower power priority. Ports that connect devices critical to the operation of the network - like the E911 telephones ports - should be set to higher priority.
.1.3.6.1.4.1.11.2.14.11.5.1.32.1.5.5.1.4,HP-AUTZ-MIB::hpSwitchAutzUserRolePoeAllocBy,INTEGER,read-create,,current,usage(1):class(2),This object indicates the power allocation method for this port. The default value is usage.
.1.3.6.1.4.1.11.2.14.11.5.1.32.1.5.5.1.5,HP-AUTZ-MIB::hpSwitchAutzUserRoleSubTypeRowStatus,INTEGER,read-create,,current,active(1):notInService(2):notReady(3):createAndGo(4):createAndWait(5):destroy(6),The Row Status of this entry. To create a new entry, send an SNMP SET request with a RowStatus of 'createAndGo'. active - the entry is ready to use. notInService - not valid for this table. notReady - the entry is not fully configured. createAndGo - create a new entry. Entries of hpSwitchAutzUserRoleType 'downloaded' cannot be created or modified. createAndWait - not valid for this table. delete - delete the entry. Entries of hpSwitchAutzUserRoleType 'predefined' and the entry assigned to hpSwitchAutzUserRoleInitialRoleName cannot be deleted.
.1.3.6.1.4.1.11.2.14.11.5.1.32.1.5.5.1.7,HP-AUTZ-MIB::hpSwitchAutzUserRolePortMode,INTEGER,read-create,,current,true(1):false(2),This object indicates if the auth method on a port will be operating on a port mode or not.
.1.3.6.1.4.1.11.2.14.11.5.1.32.2,HP-AUTZ-MIB::hpSwitchAuthorizationConformance,,,,,,
.1.3.6.1.4.1.11.2.14.11.5.1.32.2.1,HP-AUTZ-MIB::hpSwitchAuthorizationMIBCompliances,,,,,,
.1.3.6.1.4.1.11.2.14.11.5.1.32.2.1.1,HP-AUTZ-MIB::hpSwitchAuthorizationMIBCompliance,,,,,,The compliance statement for devices implementing the HP-AUTZ-MIB.
.1.3.6.1.4.1.11.2.14.11.5.1.32.2.1.2,HP-AUTZ-MIB::hpSwitchLocalMgmtPrivGrpMIBCompliance,,,,,,The compliance statement for listing the local management privilege methods to be tried for granting different access levels through various access tasks
.1.3.6.1.4.1.11.2.14.11.5.1.32.2.1.3,HP-AUTZ-MIB::hpSwitchLocalMgmtPrivGrpMIBCompliance1,,,,,,The compliance statement for listing the local management privilege methods to be tried for granting different access levels through various access tasks
.1.3.6.1.4.1.11.2.14.11.5.1.32.2.1.4,HP-AUTZ-MIB::hpSwitchAuthorizationObjectsGrpMIBCompliance,,,,,,The compliance statement for listing the local management privilege methods to be tried for granting different access levels through various access tasks
.1.3.6.1.4.1.11.2.14.11.5.1.32.2.1.5,HP-AUTZ-MIB::hpSwitchAuthorizationNotificationGrpMIBCompliance,,,,,,The compliance statement for listing the local management privilege methods to be tried for granting different access levels through various access tasks
.1.3.6.1.4.1.11.2.14.11.5.1.32.2.1.6,HP-AUTZ-MIB::hpSwitchAutzRoleGrpCompliance,,,,,,The compliance statement for user roles.
.1.3.6.1.4.1.11.2.14.11.5.1.32.2.1.7,HP-AUTZ-MIB::hpSwitchAutzRoleGrpCompliance1,,,,,,The compliance statement for user roles.
.1.3.6.1.4.1.11.2.14.11.5.1.32.2.1.8,HP-AUTZ-MIB::hpSwitchAutzRoleGrpCompliance2,,,,,,The compliance statement for user roles.
.1.3.6.1.4.1.11.2.14.11.5.1.32.2.1.9,HP-AUTZ-MIB::hpSwitchAutzRoleGrpCompliance3,,,,,,The compliance statement for user roles.
.1.3.6.1.4.1.11.2.14.11.5.1.32.2.1.10,HP-AUTZ-MIB::hpSwitchAutzRoleGrpCompliance4,,,,,,The compliance statement for user roles.
.1.3.6.1.4.1.11.2.14.11.5.1.32.2.1.11,HP-AUTZ-MIB::hpSwitchLocalMgmtPrivGrpMIBCompliance2,,,,,,The compliance statement for listing the local management privilege methods to be tried for granting different access levels through various access tasks
.1.3.6.1.4.1.11.2.14.11.5.1.32.2.1.12,HP-AUTZ-MIB::hpSwitchLocalMgmtPrivGrpMIBCompliance3,,,,,,The compliance statement for listing the local management privilege methods to be tried for granting different access levels through various access tasks
.1.3.6.1.4.1.11.2.14.11.5.1.32.2.1.13,HP-AUTZ-MIB::hpSwitchAutzRoleGrpCompliance5,,,,,,The compliance statement for user roles.
.1.3.6.1.4.1.11.2.14.11.5.1.32.2.1.14,HP-AUTZ-MIB::hpSwitchAutzRoleGrpCompliance6,,,,,,The compliance statement for user roles.
.1.3.6.1.4.1.11.2.14.11.5.1.32.2.2,HP-AUTZ-MIB::hpSwitchAuthorizationMIBGroups,,,,,,
.1.3.6.1.4.1.11.2.14.11.5.1.32.2.2.1,HP-AUTZ-MIB::hpSwitchAuthorizationConfigGroup,,,,,,A collection of objects to support authorization service.
.1.3.6.1.4.1.11.2.14.11.5.1.32.2.2.2,HP-AUTZ-MIB::hpicfSwitchAuthorizationNotificationGroup,,,,,,A group of switch authorization notifications.
.1.3.6.1.4.1.11.2.14.11.5.1.32.2.2.3,HP-AUTZ-MIB::hpicfSwitchAuthorizationObjectsGroup,,,,,,A group of switch authorization objects.
.1.3.6.1.4.1.11.2.14.11.5.1.32.2.2.4,HP-AUTZ-MIB::hpSwitchAutzLocalMgmtPrivGroup,,,,,,A collection of objects for configuring Local Manangement Privilege Groups
.1.3.6.1.4.1.11.2.14.11.5.1.32.2.2.5,HP-AUTZ-MIB::hpSwitchAutzLocalMgmtPrivGroup1,,,,,,A collection of objects for configuring Local Mangement Privilege Groups
.1.3.6.1.4.1.11.2.14.11.5.1.32.2.2.6,HP-AUTZ-MIB::hpSwitchAutzUserRoleGroup,,,,,,A collection of objects for supporting local user roles.
.1.3.6.1.4.1.11.2.14.11.5.1.32.2.2.7,HP-AUTZ-MIB::hpSwitchAutzUserRoleGroup1,,,,,,A collection of objects for supporting local user roles.
.1.3.6.1.4.1.11.2.14.11.5.1.32.2.2.8,HP-AUTZ-MIB::hpSwitchAutzUserRoleGroup2,,,,,,A collection of objects for supporting local user roles.
.1.3.6.1.4.1.11.2.14.11.5.1.32.2.2.9,HP-AUTZ-MIB::hpSwitchAutzUserRoleGroup3,,,,,,A collection of objects for supporting local user roles.
.1.3.6.1.4.1.11.2.14.11.5.1.32.2.2.10,HP-AUTZ-MIB::hpSwitchAutzUserRoleGroup4,,,,,,A collection of objects for supporting local user roles.
.1.3.6.1.4.1.11.2.14.11.5.1.32.2.2.13,HP-AUTZ-MIB::hpSwitchAutzUserRoleGroup5,,,,,,A collection of objects for supporting local user roles.
.1.3.6.1.4.1.11.2.14.11.5.1.32.2.2.14,HP-AUTZ-MIB::hpSwitchAutzUserRoleGroup6,,,,,,A collection of objects for supporting local user roles.
.1.3.6.1.4.1.11.2.14.11.5.1.33,HP-ICF-OID::hpicfUdldMIB,,,,,,
.1.3.6.1.4.1.11.2.14.11.5.1.33.0,HP-ICF-UDLD-MIB::hpicfUdldNotifications,,,,,,
.1.3.6.1.4.1.11.2.14.11.5.1.33.0.0,HP-ICF-UDLD-MIB::hpicfUdldNotificationPrefix,,,,,,
.1.3.6.1.4.1.11.2.14.11.5.1.33.0.0.1,HP-ICF-UDLD-MIB::hpicfUdldLinkfault,,,,,,This notification is generated when the link failure occurs.
.1.3.6.1.4.1.11.2.14.11.5.1.33.0.0.2,HP-ICF-UDLD-MIB::hpicfUdldLinkUp,,,,,,This notification is generated when UDLD link goes from down to up.
.1.3.6.1.4.1.11.2.14.11.5.1.33.1,HP-ICF-UDLD-MIB::hpicfUdldObjects,,,,,,
.1.3.6.1.4.1.11.2.14.11.5.1.33.1.1,HP-ICF-UDLD-MIB::hpicfUdldConfig,,,,,,
.1.3.6.1.4.1.11.2.14.11.5.1.33.1.1.1,HP-ICF-UDLD-MIB::hpicfUdldConfigTimeInterval,Unsigned32,read-write,,current,,The interval in seconds at which the UDLD enabled ports exchange  proprietary pulse packet. Here 10 is 1 sec, 11 is 1.1 sec, and so on. The default value for hpicfUdldConfigTimeInterval  object is 5 seconds.
.1.3.6.1.4.1.11.2.14.11.5.1.33.1.1.2,HP-ICF-UDLD-MIB::hpicfUdldConfigMaxRetries,Unsigned32,read-write,,current,,Maximum number of retries to wait for a response.  The default value for hpicfUdldConfigMaxRetries object is 4.
.1.3.6.1.4.1.11.2.14.11.5.1.33.1.1.3,HP-ICF-UDLD-MIB::hpicfUdldPortConfigTable,,not-accessible,,current,,The table that controls UDLD status on individual ports.
.1.3.6.1.4.1.11.2.14.11.5.1.33.1.1.3.1,HP-ICF-UDLD-MIB::hpicfUdldPortConfigEntry,,not-accessible,ifIndex,current,,An entry in the hpicfUdldPortConfigTable.
.1.3.6.1.4.1.11.2.14.11.5.1.33.1.1.3.1.1,HP-ICF-UDLD-MIB::hpicfUdldPortAdminStatus,INTEGER,read-write,,current,enable(1):disable(2),The hpicfUdldPortAdminStatus can be enabled/disabled The value enable(1) means that UDLD is enabled. the value disable(2) means that UDLD is disabled.
.1.3.6.1.4.1.11.2.14.11.5.1.33.1.1.3.1.2,HP-ICF-UDLD-MIB::hpicfUdldPortVlanId,Integer32,read-write,,current,,The vlan id associated with tagged UDLD control packets. The value of 0 indicates that UDLD control packets are untagged.
.1.3.6.1.4.1.11.2.14.11.5.1.33.1.2,HP-ICF-UDLD-MIB::hpicfUdldStats,,,,,,
.1.3.6.1.4.1.11.2.14.11.5.1.33.1.2.1,HP-ICF-UDLD-MIB::hpicfUdldPortStatsTable,,not-accessible,,current,,A table containing UDLD statistics for individual ports.
.1.3.6.1.4.1.11.2.14.11.5.1.33.1.2.1.1,HP-ICF-UDLD-MIB::hpicfUdldPortStatsEntry,,not-accessible,ifIndex,current,,UDLD statistics for a particular physical port.
.1.3.6.1.4.1.11.2.14.11.5.1.33.1.2.1.1.1,HP-ICF-UDLD-MIB::hpicfUdldStatsPortCurrentState,INTEGER,read-only,,current,unknown(0):offline(1):failure(2):up(3),The desired status of UDLD on a port. If the associated hpicfUdldStatsPortCurrentState object has a value of 'offline(1)', then the port or udld is administratively disabled. If the associated hpicfUdldStatsPortCurrentState object has a value of 'failure(2)', then the port and udld are administratively enabled, but udld packets are not being received successfully. Link may or may not be present. If the associated hpicfUdldStatsPortCurrentState object has a value of 'up(3)', then udld is enabled and udld packets are being received successfully in both directions.
.1.3.6.1.4.1.11.2.14.11.5.1.33.1.2.1.1.2,HP-ICF-UDLD-MIB::hpicfUdldStatsPortNeighborMAC,OCTET,read-only,,current,,The MAC address of the adjacent switch.
.1.3.6.1.4.1.11.2.14.11.5.1.33.1.2.1.1.3,HP-ICF-UDLD-MIB::hpicfUdldStatsPortNeighborPort,Integer32,read-only,,current,,The port number of the adjacent switch.
.1.3.6.1.4.1.11.2.14.11.5.1.33.1.2.1.1.4,HP-ICF-UDLD-MIB::hpicfUdldStatsPortTotalTx,Counter32,read-only,,current,,The number of UDLD control packets sent from this port.
.1.3.6.1.4.1.11.2.14.11.5.1.33.1.2.1.1.5,HP-ICF-UDLD-MIB::hpicfUdldStatsPortTotalRx,Counter32,read-only,,current,,The number of UDLD control packets received on this port.
.1.3.6.1.4.1.11.2.14.11.5.1.33.1.2.1.1.6,HP-ICF-UDLD-MIB::hpicfUdldStatsPortNumStateChange,Counter32,read-only,,current,,The number of state transitions.
.1.3.6.1.4.1.11.2.14.11.5.1.33.1.2.1.1.7,HP-ICF-UDLD-MIB::hpicfUdldStatsPortStatus,Integer32,read-only,,current,,The value of this object indicates whether the port is blocked by UDLD or not.
.1.3.6.1.4.1.11.2.14.11.5.1.33.1.2.2,HP-ICF-UDLD-MIB::hpicfUdldStatsClearAll,INTEGER,read-write,,current,true(1):false(2),When the value of this object is set to TRUE, the UDLD transmit, receive and state change statistics are cleared. A get request for this object always returns FALSE.
.1.3.6.1.4.1.11.2.14.11.5.1.33.2,HP-ICF-UDLD-MIB::hpicfUdldConformance,,,,,,
.1.3.6.1.4.1.11.2.14.11.5.1.33.2.1,HP-ICF-UDLD-MIB::hpicfUdldCompliances,,,,,,
.1.3.6.1.4.1.11.2.14.11.5.1.33.2.1.1,HP-ICF-UDLD-MIB::hpicfUdldCompliance,,,,,,The compliance statement for SNMP entities which implement the UDLD MIB.
.1.3.6.1.4.1.11.2.14.11.5.1.33.2.1.2,HP-ICF-UDLD-MIB::hpicfUdldCompliance2,,,,,,The compliance statement for SNMP entities that implement the UDLD MIB.
.1.3.6.1.4.1.11.2.14.11.5.1.33.2.2,HP-ICF-UDLD-MIB::hpicfUdldGroups,,,,,,
.1.3.6.1.4.1.11.2.14.11.5.1.33.2.2.1,HP-ICF-UDLD-MIB::hpicfUdldPortConfigGroup,,,,,,The collection of objects which are used to configure the UDLD implementation behavior. This group is mandatory for ports which implement the UDLD.
.1.3.6.1.4.1.11.2.14.11.5.1.33.2.2.2,HP-ICF-UDLD-MIB::hpicfUdldPortStatsGroup,,,,,,The collection of objects which are used to represent UDLD statistics. This group is mandatory for ports which implement the UDLD.
.1.3.6.1.4.1.11.2.14.11.5.1.33.2.2.3,HP-ICF-UDLD-MIB::hpicfUdldNotificationGroup,,,,,,Notification used for signaling change in Link state.
.1.3.6.1.4.1.11.2.14.11.5.1.33.2.2.4,HP-ICF-UDLD-MIB::hpicfUdldStatsGroup,,,,,,The collection of objects that are used to perform operations on UDLD related statistics.
.1.3.6.1.4.1.11.2.14.11.5.1.34,HP-ICF-OID::hpicfIpDhcpSnoop,,,,,,
.1.3.6.1.4.1.11.2.14.11.5.1.34.0,HP-ICF-DHCP-SNOOP-MIB::hpicfDhcpSnoopNotifications,,,,,,
.1.3.6.1.4.1.11.2.14.11.5.1.34.0.1,HP-ICF-DHCP-SNOOP-MIB::hpicfDhcpSnoopErrantReply,,,,,,An hpicfDhcpSnoopErrantReply notification signifies that the DHCP snooping entity has detected and dropped an errant DHCP response packet.
.1.3.6.1.4.1.11.2.14.11.5.1.34.1,HP-ICF-DHCP-SNOOP-MIB::hpicfIpDhcpSnoopObjects,,,,,,
.1.3.6.1.4.1.11.2.14.11.5.1.34.1.1,HP-ICF-DHCP-SNOOP-MIB::hpicfIpDhcpSnoopConfig,,,,,,
.1.3.6.1.4.1.11.2.14.11.5.1.34.1.1.1,HP-ICF-DHCP-SNOOP-MIB::hpicfDhcpSnoopGlobalCfg,,,,,,
.1.3.6.1.4.1.11.2.14.11.5.1.34.1.1.1.1,HP-ICF-DHCP-SNOOP-MIB::hpicfDhcpSnoopEnable,INTEGER,read-write,,current,true(1):false(2),The administrative status of the DHCP Snooping feature.
.1.3.6.1.4.1.11.2.14.11.5.1.34.1.1.1.2,HP-ICF-DHCP-SNOOP-MIB::hpicfDhcpSnoopVlanEnable,OCTET,read-write,,current,,The administrative status for DHCP Snooping on each VLAN. There will be one bit in this string for each possible VLAN ID. Each octet within this value specifies a set of eight VLANs, with the first octet specifying VLAN IDs 1 through 8, the second octet specifying VLAN IDs 9 through 16, etc. Within each octet, the most significant bit represents the lowest numbered VLAN ID, and the least significant bit represents the highest numbered VLAN ID. Thus, each possible VLAN ID of the bridge is represented by a single bit within the value of this object. If a bit at position 'n' has a value of '1', then DHCP Snooping is enabled on VLAN 'n'. If this bit has a value of '0',DHCP Snooping is not enabled on the VLAN 'n',
.1.3.6.1.4.1.11.2.14.11.5.1.34.1.1.1.3,HP-ICF-DHCP-SNOOP-MIB::hpicfDhcpSnoopVerifyMac,INTEGER,read-write,,current,true(1):false(2),When this variable is set to 'true', DHCP Snooping will verify that the MAC address in the chaddr field of the DHCP header matches the source MAC address in all DHCP packets received on untrusted ports. When this variable is set to 'false', DHCP Snooping will omit this check. The value of this variable is ignored when DHCP Snooping is disabled.
.1.3.6.1.4.1.11.2.14.11.5.1.34.1.1.1.4,HP-ICF-DHCP-SNOOP-MIB::hpicfDhcpSnoopDatabaseFile,OCTET,read-write,,current,,A location to store the lease database, or to retrieve it after a reboot. The location must be given in the form of a Uniform Resource Locator (URL) as defined in RFC 2396. The allowed character sets and the encoding rules defined in RFC 2396 section 2 apply.
.1.3.6.1.4.1.11.2.14.11.5.1.34.1.1.1.5,HP-ICF-DHCP-SNOOP-MIB::hpicfDhcpSnoopDatabaseWriteDelay,Unsigned32,read-write,,current,,The number of seconds to delay writing the DHCP lease database file after a database change. This potentially allows grouping multiple database changes into a single write. The default is 300 seconds.
.1.3.6.1.4.1.11.2.14.11.5.1.34.1.1.1.6,HP-ICF-DHCP-SNOOP-MIB::hpicfDhcpSnoopDatabaseWriteTimeout,Unsigned32,read-write,,current,,The number of seconds to wait for the database file transfer to finish before giving up and declaring a failure. A value of 0 means continue retrying indefinitely. The default is 300 seconds.
.1.3.6.1.4.1.11.2.14.11.5.1.34.1.1.1.7,HP-ICF-DHCP-SNOOP-MIB::hpicfDhcpSnoopOpt82Insert,INTEGER,read-write,,current,true(1):false(2),When this object is set to true, DHCP snooping will add a DHCP relay information option to DHCP client packets that it forwards on trusted ports, and will examine and strip DHCP relay information options that were inserted by this switch on DHCP server packets that it forwards to untrusted ports. Note that when DHCP relay and DHCP snooping are both enabled, and this object is set to true, relay information option processing will be handled by DHCP snooping, and any DHCP relay settings for relay information option processing will be ignored. This object defaults to true.
.1.3.6.1.4.1.11.2.14.11.5.1.34.1.1.1.8,HP-ICF-DHCP-SNOOP-MIB::hpicfDhcpSnoopOpt82Policy,INTEGER,read-write,,current,keep(1):replace(2):drop(3),This object configures the behavior of DHCP snooping when forwarding a DHCP packet from an untrusted port that already has a DHCP relay information option present. The policies supported are: keep - forward the packet without updating the existing option replace - replace the existing option with one generated by this switch drop - drop the packet This policy is only applied if DHCP snooping is enabled and hpicfDhcpSnoopOpt82Insert is true. In all cases where this policy is applied, if there is no relay information option present in the received packet, DHCP snooping will add one. The default policy is drop.
.1.3.6.1.4.1.11.2.14.11.5.1.34.1.1.1.9,HP-ICF-DHCP-SNOOP-MIB::hpicfDhcpSnoopOpt82RemoteId,INTEGER,read-write,,current,mac(1):subnetIP(2):mgmtIP(3),This object configures the value that will be used for the remote ID sub-option of the relay information option that will be inserted by DHCP snooping. The possible values are: mac - switch MAC address subnetIP - switch IP address on the VLAN on which the DHCP packet was received mgmtIP - switch IP address on the management VLAN The value of this object is ignored unless DHCP snooping is enabled and hpicfDhcpSnoopOpt82Insert is true. The default value is mac.
.1.3.6.1.4.1.11.2.14.11.5.1.34.1.1.1.10,HP-ICF-DHCP-SNOOP-MIB::hpicfDhcpSnoopErrantReplyEnable,INTEGER,read-write,,current,enabled(1):disabled(2),The operational status of hpicfDhcpSnoopErrantReply  notifications. The default value is 1 (Enabled). A value  of 2 represents Disabled. Writing this object requires  authentication, such as provided by SNMPv3.
.1.3.6.1.4.1.11.2.14.11.5.1.34.1.1.2,HP-ICF-DHCP-SNOOP-MIB::hpicfDhcpSnoopPortTable,,not-accessible,,current,,Per-interface configuration for DHCP Snooping.
.1.3.6.1.4.1.11.2.14.11.5.1.34.1.1.2.1,HP-ICF-DHCP-SNOOP-MIB::hpicfDhcpSnoopPortEntry,,not-accessible,ifIndex,current,,DHCP snooping configuration information for a single port.
.1.3.6.1.4.1.11.2.14.11.5.1.34.1.1.2.1.1,HP-ICF-DHCP-SNOOP-MIB::hpicfDhcpSnoopPortTrust,INTEGER,read-write,,current,true(1):false(2),This object indicates whether this port is trusted for DHCP snooping.
.1.3.6.1.4.1.11.2.14.11.5.1.34.1.1.3,HP-ICF-DHCP-SNOOP-MIB::hpicfDhcpSnoopServerTable,,not-accessible,,current,,Table of authorized DHCP server addresses.
.1.3.6.1.4.1.11.2.14.11.5.1.34.1.1.3.1,HP-ICF-DHCP-SNOOP-MIB::hpicfDhcpSnoopServerEntry,,not-accessible,hpicfDhcpSnoopServerAddrType:hpicfDhcpSnoopServerAddress,current,,A row in the table, containing the address of a single authorized DHCP server.
.1.3.6.1.4.1.11.2.14.11.5.1.34.1.1.3.1.1,HP-ICF-DHCP-SNOOP-MIB::hpicfDhcpSnoopServerAddrType,INTEGER,not-accessible,,current,unknown(0):ipv4(1):ipv6(2):ipv4z(3):ipv6z(4):dns(16),The type of address in hpicfDhcpSnoopServerAddress.
.1.3.6.1.4.1.11.2.14.11.5.1.34.1.1.3.1.2,HP-ICF-DHCP-SNOOP-MIB::hpicfDhcpSnoopServerAddress,OCTET,not-accessible,,current,,The address of a known valid DHCP server. The type of address contained in this object is indicated by hpicfDhcpSnoopServerAddrType. For DHCP snooping to allow a server to client packet to be forwarded, it must be received on a trusted port from a server address in this table. If this table is empty, all addresses are trusted.  Note that this feature compares the source address of the received DHCP server packet against the addresses in this table. This means that this table needs to contain trusted server addresses as well as trusted DHCP relays that a server packet may be relayed through.
.1.3.6.1.4.1.11.2.14.11.5.1.34.1.1.3.1.3,HP-ICF-DHCP-SNOOP-MIB::hpicfDhcpSnoopServerStatus,INTEGER,read-create,,current,active(1):notInService(2):notReady(3):createAndGo(4):createAndWait(5):destroy(6),The status of this DHCP server address entry. Only 'active' entries are used when validating DHCP server packets.
.1.3.6.1.4.1.11.2.14.11.5.1.34.1.1.4,HP-ICF-DHCP-SNOOP-MIB::hpicfIpStaticBindingsTable,,not-accessible,,current,,A table of configured static IP address bindings for this device. Active rows in this table will also be reported in the hpicfDhcpSnoopBindingsTable as entries with an hpicfDhcpSnoopBindingsLeaseTime of 0xffffffff and an hpicfDhcpSnoopBindingsType of 'static'.
.1.3.6.1.4.1.11.2.14.11.5.1.34.1.1.4.1,HP-ICF-DHCP-SNOOP-MIB::hpicfIpStaticBindingsEntry,,not-accessible,hpicfIpStaticBindingsVlan:hpicfIpStaticBindingsAddrType:hpicfIpStaticBindingsAddress,current,,A row in the table, containing a single static IP address binding.
.1.3.6.1.4.1.11.2.14.11.5.1.34.1.1.4.1.1,HP-ICF-DHCP-SNOOP-MIB::hpicfIpStaticBindingsVlan,Unsigned32,not-accessible,,current,,The VLAN ID on which this static address binding is valid.
.1.3.6.1.4.1.11.2.14.11.5.1.34.1.1.4.1.2,HP-ICF-DHCP-SNOOP-MIB::hpicfIpStaticBindingsAddrType,INTEGER,not-accessible,,current,unknown(0):ipv4(1):ipv6(2):ipv4z(3):ipv6z(4):dns(16),The type of IP address contained in hpicfIpStaticBindingsAddress. The only values expected are ipv4 or ipv6.
.1.3.6.1.4.1.11.2.14.11.5.1.34.1.1.4.1.3,HP-ICF-DHCP-SNOOP-MIB::hpicfIpStaticBindingsAddress,OCTET,not-accessible,,current,,The static IP address of this binding. The type of address contained in this object is indicated by hpicfIpStaticBindingsAddrType.
.1.3.6.1.4.1.11.2.14.11.5.1.34.1.1.4.1.4,HP-ICF-DHCP-SNOOP-MIB::hpicfIpStaticBindingsMacAddress,OCTET,read-create,,current,,The MAC address associated with this static binding on this VLAN.
.1.3.6.1.4.1.11.2.14.11.5.1.34.1.1.4.1.5,HP-ICF-DHCP-SNOOP-MIB::hpicfIpStaticBindingsInterface,Integer32,read-create,,current,,The interface that this static IP address binding is valid on in this VLAN.
.1.3.6.1.4.1.11.2.14.11.5.1.34.1.1.4.1.6,HP-ICF-DHCP-SNOOP-MIB::hpicfIpStaticBindingsStatus,INTEGER,read-create,,current,active(1):notInService(2):notReady(3):createAndGo(4):createAndWait(5):destroy(6),The status of this static IP address binding. This object cannot be set to 'active' until valid value has been configured for hpicfIpStaticBindingsMacAddress and hpicfIpStaticBindingsInterface.
.1.3.6.1.4.1.11.2.14.11.5.1.34.1.2,HP-ICF-DHCP-SNOOP-MIB::hpicfIpDhcpSnoopStatus,,,,,,
.1.3.6.1.4.1.11.2.14.11.5.1.34.1.2.1,HP-ICF-DHCP-SNOOP-MIB::hpicfDhcpSnoopGlobalStats,,,,,,
.1.3.6.1.4.1.11.2.14.11.5.1.34.1.2.1.1,HP-ICF-DHCP-SNOOP-MIB::hpicfDhcpSnoopCSForwards,Counter32,read-only,,current,,Number of snooped DHCP packets that were successfully forwarded from untrusted client ports towards trusted DHCP server ports.
.1.3.6.1.4.1.11.2.14.11.5.1.34.1.2.1.2,HP-ICF-DHCP-SNOOP-MIB::hpicfDhcpSnoopCSMACMismatches,Counter32,read-only,,current,,Number of snooped DHCP client packets that were discarded because the MAC source address of the packet did not match the chaddr.
.1.3.6.1.4.1.11.2.14.11.5.1.34.1.2.1.3,HP-ICF-DHCP-SNOOP-MIB::hpicfDhcpSnoopCSUntrustedOpt82s,Counter32,read-only,,current,,Number of snooped DHCP client packets that were discarded because they were received on an untrusted port and contained a relay information option.
.1.3.6.1.4.1.11.2.14.11.5.1.34.1.2.1.4,HP-ICF-DHCP-SNOOP-MIB::hpicfDhcpSnoopCSBadReleases,Counter32,read-only,,current,,Number of snooped DHCP client packets that were discarded because they were DHCPRELEASE or DHCPDECLINE packets received on a port different from the port that the address was leased to.
.1.3.6.1.4.1.11.2.14.11.5.1.34.1.2.1.5,HP-ICF-DHCP-SNOOP-MIB::hpicfDhcpSnoopCSUntrustedDestPorts,Counter32,read-only,,current,,Number of snooped DHCP client unicast packets that were dropped because they were destined to untrusted ports.
.1.3.6.1.4.1.11.2.14.11.5.1.34.1.2.1.6,HP-ICF-DHCP-SNOOP-MIB::hpicfDhcpSnoopSCForwards,Counter32,read-only,,current,,Number of snooped DHCP packets that were successfully forwarded from trusted DHCP server ports to untrusted client ports.
.1.3.6.1.4.1.11.2.14.11.5.1.34.1.2.1.7,HP-ICF-DHCP-SNOOP-MIB::hpicfDhcpSnoopSCUntrustedPorts,Counter32,read-only,,current,,Number of snooped DHCP server packets that were dropped because they were received from untrusted ports.
.1.3.6.1.4.1.11.2.14.11.5.1.34.1.2.1.8,HP-ICF-DHCP-SNOOP-MIB::hpicfDhcpSnoopSCUntrustedServers,Counter32,read-only,,current,,Number of snooped DHCP server packets that were dropped because they were received from unauthorized DHCP server addresses.
.1.3.6.1.4.1.11.2.14.11.5.1.34.1.2.1.9,HP-ICF-DHCP-SNOOP-MIB::hpicfDhcpSnoopSCOpt82Failures,Counter32,read-only,,current,,Number of snooped DHCP server packets that were dropped because they did not contain a valid relay information option.
.1.3.6.1.4.1.11.2.14.11.5.1.34.1.2.1.10,HP-ICF-DHCP-SNOOP-MIB::hpicfDhcpSnoopDBFileWriteAttempts,Counter32,read-only,,current,,Number of attempts that have been made to write the DHCP lease database to a configured file location.
.1.3.6.1.4.1.11.2.14.11.5.1.34.1.2.1.11,HP-ICF-DHCP-SNOOP-MIB::hpicfDhcpSnoopDBFileWriteFailures,Counter32,read-only,,current,,Number of times that an attempt to write the DHCP lease database to a configured file location has failed.
.1.3.6.1.4.1.11.2.14.11.5.1.34.1.2.1.12,HP-ICF-DHCP-SNOOP-MIB::hpicfDhcpSnoopDBFileReadStatus,INTEGER,read-only,,current,notConfigured(1):inProgress(2):succeeded(3):failed(4),This object indicates whether we were able to successfully load the DHCP lease database from the configured location after the last reboot.
.1.3.6.1.4.1.11.2.14.11.5.1.34.1.2.1.13,HP-ICF-DHCP-SNOOP-MIB::hpicfDhcpSnoopDBFileWriteStatus,INTEGER,read-only,,current,notConfigured(1):delaying(2):inProgress(3):succeeded(4):failed(5),This object indicates whether the DHCP lease database is currently synchronized with the the configured file server. 'notConfigured' means that we have not been configured with a server location. 'delaying' means that we are waiting for the write delay to expire before writing the current database. 'inProgress' means that a lease database transfer is active. 'succeeded' means that all leases in our database have been written to the server. 'failed' means that the last attempt to write our lease database failed.
.1.3.6.1.4.1.11.2.14.11.5.1.34.1.2.1.14,HP-ICF-DHCP-SNOOP-MIB::hpicfDhcpSnoopDBFileLastWriteTime,OCTET,read-only,,current,,The time that we last successfully wrote our lease database to the server. This object will contain a value of all zeroes if we have not written our lease database since the last reboot.
.1.3.6.1.4.1.11.2.14.11.5.1.34.1.2.2,HP-ICF-DHCP-SNOOP-MIB::hpicfDhcpSnoopBindingsTable,,not-accessible,,current,,A table of DHCP bindings that have been learned by this device.
.1.3.6.1.4.1.11.2.14.11.5.1.34.1.2.2.1,HP-ICF-DHCP-SNOOP-MIB::hpicfDhcpSnoopBindingsEntry,,not-accessible,hpicfDhcpSnoopBindingsVlan:hpicfDhcpSnoopBindingsMacAddress:hpicfDhcpSnoopBindingsAddrType:hpicfDhcpSnoopBindingsAddress,current,,A row in the table, containing a single DHCP binding.
.1.3.6.1.4.1.11.2.14.11.5.1.34.1.2.2.1.1,HP-ICF-DHCP-SNOOP-MIB::hpicfDhcpSnoopBindingsVlan,Unsigned32,not-accessible,,current,,The VLAN ID on which this client binding was learned.
.1.3.6.1.4.1.11.2.14.11.5.1.34.1.2.2.1.2,HP-ICF-DHCP-SNOOP-MIB::hpicfDhcpSnoopBindingsMacAddress,OCTET,not-accessible,,current,,The MAC address of the DHCP client that this binding applies to.
.1.3.6.1.4.1.11.2.14.11.5.1.34.1.2.2.1.3,HP-ICF-DHCP-SNOOP-MIB::hpicfDhcpSnoopBindingsAddrType,INTEGER,not-accessible,,current,unknown(0):ipv4(1):ipv6(2):ipv4z(3):ipv6z(4):dns(16),The type of IP address contained in hpicfDhcpSnoopBindingsAddress. The only values expected are ipv4 or ipv6.
.1.3.6.1.4.1.11.2.14.11.5.1.34.1.2.2.1.4,HP-ICF-DHCP-SNOOP-MIB::hpicfDhcpSnoopBindingsAddress,OCTET,not-accessible,,current,,An IP address that has been leased to this client. The type of address contained in this object is indicated by hpicfDhcpSnoopBindingsAddrType.
.1.3.6.1.4.1.11.2.14.11.5.1.34.1.2.2.1.5,HP-ICF-DHCP-SNOOP-MIB::hpicfDhcpSnoopBindingsInterface,Integer32,read-only,,current,,The interface that this DHCP client is connected to.
.1.3.6.1.4.1.11.2.14.11.5.1.34.1.2.2.1.6,HP-ICF-DHCP-SNOOP-MIB::hpicfDhcpSnoopBindingsLeaseTime,Unsigned32,read-only,,current,,The number of seconds remaining until this DHCP lease times out. A value of 0xffffffff indicates an infinite lease.
.1.3.6.1.4.1.11.2.14.11.5.1.34.1.2.2.1.7,HP-ICF-DHCP-SNOOP-MIB::hpicfDhcpSnoopBindingsType,INTEGER,read-only,,current,dhcp(1):static(2),This object indicates how this binding was learned. A value of 'dhcp' indicates that this binding was learned by snooping a DHCP lease. A value of 'static' indicates that this binding was statically configured via the hpicfIpStaticBindingsTable.
.1.3.6.1.4.1.11.2.14.11.5.1.34.1.3,HP-ICF-DHCP-SNOOP-MIB::hpicfDhcpSnoopNotifyObjects,,,,,,
.1.3.6.1.4.1.11.2.14.11.5.1.34.1.3.1,HP-ICF-DHCP-SNOOP-MIB::hpicfDhcpSnoopNotifyCount,Counter32,accessible-for-notify,,current,,A count of the DHCP snooping notification sent from the DHCP snooping entity to the SNMP entity. This count may be greater than the count of notifications actually transmitted by the SNMP entity due to rate limiting or configuration.
.1.3.6.1.4.1.11.2.14.11.5.1.34.1.3.2,HP-ICF-DHCP-SNOOP-MIB::hpicfDhcpSnoopErrantSrcMAC,OCTET,accessible-for-notify,,current,,The MAC address received in the errant DHCP/BootP reply packet.
.1.3.6.1.4.1.11.2.14.11.5.1.34.1.3.3,HP-ICF-DHCP-SNOOP-MIB::hpicfDhcpSnoopErrantSrcIPType,INTEGER,accessible-for-notify,,current,unknown(0):ipv4(1):ipv6(2):ipv4z(3):ipv6z(4):dns(16),InetAddressType of the address reported in hpicfDhcpSnoopErrantSrcIP.
.1.3.6.1.4.1.11.2.14.11.5.1.34.1.3.4,HP-ICF-DHCP-SNOOP-MIB::hpicfDhcpSnoopErrantSrcIP,OCTET,accessible-for-notify,,current,,The IP address received in the errant DHCP/BootP reply packet.
.1.3.6.1.4.1.11.2.14.11.5.1.34.2,HP-ICF-DHCP-SNOOP-MIB::hpicfDhcpSnoopConformance,,,,,,
.1.3.6.1.4.1.11.2.14.11.5.1.34.2.1,HP-ICF-DHCP-SNOOP-MIB::hpicfIpDhcpSnoopGroups,,,,,,
.1.3.6.1.4.1.11.2.14.11.5.1.34.2.1.1,HP-ICF-DHCP-SNOOP-MIB::hpicfDhcpSnoopBaseGroup,,,,,,A collection of objects for configuring and monitoring the base DHCP snooping functionality.
.1.3.6.1.4.1.11.2.14.11.5.1.34.2.1.2,HP-ICF-DHCP-SNOOP-MIB::hpicfDhcpSnoopOpt82Group,,,,,,A collection of objects for configuring and monitoring DHCP snooping relay information option behavior.
.1.3.6.1.4.1.11.2.14.11.5.1.34.2.1.3,HP-ICF-DHCP-SNOOP-MIB::hpicfDhcpSnoopServersGroup,,,,,,A collection of objects for configuring and monitoring DHCP snooping trusted servers.
.1.3.6.1.4.1.11.2.14.11.5.1.34.2.1.4,HP-ICF-DHCP-SNOOP-MIB::hpicfDhcpSnoopDbaseFileGroup,,,,,,A collection of objects for configuring and monitoring DHCP snooping database file management.
.1.3.6.1.4.1.11.2.14.11.5.1.34.2.1.5,HP-ICF-DHCP-SNOOP-MIB::hpicfDhcpSnoopBindingsGroup,,,,,,A collection of objects for accessing the DHCP snooping lease database.
.1.3.6.1.4.1.11.2.14.11.5.1.34.2.1.6,HP-ICF-DHCP-SNOOP-MIB::hpicfDhcpSnoopStaticBindingsGroup,,,,,,A collection of objects for managing static configuration of IP source address bindings.
.1.3.6.1.4.1.11.2.14.11.5.1.34.2.1.7,HP-ICF-DHCP-SNOOP-MIB::hpicfDhcpSnoopNotifyObjsGroup,,,,,,Group of objects used in DHCP Snooping notifications.
.1.3.6.1.4.1.11.2.14.11.5.1.34.2.1.8,HP-ICF-DHCP-SNOOP-MIB::hpicfDhcpSnoopNotificationGroup,,,,,,Description.
.1.3.6.1.4.1.11.2.14.11.5.1.34.2.2,HP-ICF-DHCP-SNOOP-MIB::hpicfDhcpSnoopCompliances,,,,,,
.1.3.6.1.4.1.11.2.14.11.5.1.34.2.2.1,HP-ICF-DHCP-SNOOP-MIB::hpicfDhcpSnoopCompliance,,,,,,The compliance statement for HP Routing switches that support DHCP Snooping.
.1.3.6.1.4.1.11.2.14.11.5.1.34.2.2.2,HP-ICF-DHCP-SNOOP-MIB::hpicfDhcpSnoopCompliance2,,,,,,The compliance statement for HP Routing switches that support DHCP Snooping.
.1.3.6.1.4.1.11.2.14.11.5.1.34.2.2.3,HP-ICF-DHCP-SNOOP-MIB::hpicfDhcpSnoopCompliance3,,,,,,The compliance statement for HP Routing switches that support DHCP Snooping.
.1.3.6.1.4.1.11.2.14.11.5.1.35,HP-ICF-OID::hpicfInstMonMIB,,,,,,
.1.3.6.1.4.1.11.2.14.11.5.1.35.1,HP-ICF-INST-MON::hpicfInstMonObjects,,,,,,
.1.3.6.1.4.1.11.2.14.11.5.1.35.1.1,HP-ICF-INST-MON::hpicfInstMonLogEnable,INTEGER,read-write,,current,true(1):false(2),The operational status of the Instrumentation Monitor on this switch.
.1.3.6.1.4.1.11.2.14.11.5.1.35.1.2,HP-ICF-INST-MON::hpicfInstMonTrapEnable,INTEGER,read-write,,current,true(1):false(2),The operational status of the Monitor notifications on this switch.
.1.3.6.1.4.1.11.2.14.11.5.1.35.1.3,HP-ICF-INST-MON::hpicfInstMonParameterTable,,not-accessible,,current,,Configuration of monitored instrumentation parameters.
.1.3.6.1.4.1.11.2.14.11.5.1.35.1.3.1,HP-ICF-INST-MON::hpicfInstMonParameterEntry,,not-accessible,hpicfInstMonInterfaceIndex:hpicfInstMonParameterIndex,current,,An entry in the hpicfInstMonParameterTable.
.1.3.6.1.4.1.11.2.14.11.5.1.35.1.3.1.1,HP-ICF-INST-MON::hpicfInstMonInterfaceIndex,Integer32,not-accessible,,current,,0 for global parameters, port number for per-port parameters.
.1.3.6.1.4.1.11.2.14.11.5.1.35.1.3.1.2,HP-ICF-INST-MON::hpicfInstMonParameterIndex,Integer32,not-accessible,,current,,The index of the parameter.
.1.3.6.1.4.1.11.2.14.11.5.1.35.1.3.1.3,HP-ICF-INST-MON::hpicfInstMonParameterName,OCTET,read-only,,current,,The name of the parameter.
.1.3.6.1.4.1.11.2.14.11.5.1.35.1.3.1.4,HP-ICF-INST-MON::hpicfInstMonParameterThreshold,Integer32,read-write,,current,,Generate notification if the limit is not 0 and parameter value is beyond this limit.
.1.3.6.1.4.1.11.2.14.11.5.1.35.1.4,HP-ICF-INST-MON::hpicfInstMonNotificationText,OCTET,read-only,,current,,This string is sent with hpicfInstMonNotification.
.1.3.6.1.4.1.11.2.14.11.5.1.35.1.5,HP-ICF-INST-MON::hpicfInstMonNotification,,,,,,This notification is generated when the monitored parameter is beyond the configured threshold value.
.1.3.6.1.4.1.11.2.14.11.5.1.35.1.6,HP-ICF-INST-MON::hpicfInstConfig,INTEGER,read-write,,current,true(1):false(2),This object enables/disables instrumentation on the switch. The value true(1) means that instrumentation is enabled; the value false(2) means that instrumentation is disabled.
.1.3.6.1.4.1.11.2.14.11.5.1.35.2,HP-ICF-INST-MON::hpicfInstMonConformance,,,,,,
.1.3.6.1.4.1.11.2.14.11.5.1.35.2.1,HP-ICF-INST-MON::hpicfInstMonGroups,,,,,,
.1.3.6.1.4.1.11.2.14.11.5.1.35.2.1.1,HP-ICF-INST-MON::hpicfInstMonNotificationGroup,,,,,,This notification is generated by Monitor when parameter is beyond its threshold limit.
.1.3.6.1.4.1.11.2.14.11.5.1.35.2.1.2,HP-ICF-INST-MON::hpicfInstMonBaseGroup,,,,,,A collection of objects to support basic Instrumentation Monitor configuration on HP switches.
.1.3.6.1.4.1.11.2.14.11.5.1.35.2.1.3,HP-ICF-INST-MON::hpicfInstConfigGroup,,,,,,A collection of objects to support basic Instrumentation Collection configuration on HP switches.
.1.3.6.1.4.1.11.2.14.11.5.1.35.2.1.4,HP-ICF-INST-MON::hpicfInstMonNotifyGroup,,,,,,A collection of objects to support basic notification details on HP switches.
.1.3.6.1.4.1.11.2.14.11.5.1.35.2.2,HP-ICF-INST-MON::hpicfInstMonCompliances,,,,,,
.1.3.6.1.4.1.11.2.14.11.5.1.35.2.2.1,HP-ICF-INST-MON::hpicfInstMonBaseCompliance,,,,,,The compliance statement for HP switches running Instrumentation Monitor and implementing the HP-ICF-INST-MON MIB.
.1.3.6.1.4.1.11.2.14.11.5.1.35.2.2.2,HP-ICF-INST-MON::hpicfInstConfigCompliance,,,,,,The compliance statement for HP switches running Instrumentation collection and implementing the HP-ICF-INST-MON MIB.
.1.3.6.1.4.1.11.2.14.11.5.1.35.2.2.3,HP-ICF-INST-MON::hpicfInstMonNotifyCompliance,,,,,,The compliance statement for HP switches running Instrumentation Monitor.
.1.3.6.1.4.1.11.2.14.11.5.1.36,HP-ICF-OID::hpicfL3MacConfigMIB,,,,,,
.1.3.6.1.4.1.11.2.14.11.5.1.36.1,HP-ICF-L3MAC-MIB::hpicfL3MacConfigObjects,,,,,,
.1.3.6.1.4.1.11.2.14.11.5.1.36.1.1,HP-ICF-L3MAC-MIB::hpicfL3MacConfigIfTable,,not-accessible,,current,,This table contains l3-mac configuration information 
.1.3.6.1.4.1.11.2.14.11.5.1.36.1.1.1,HP-ICF-L3MAC-MIB::hpicfL3MacConfigIfEntry,,not-accessible,,current,,An entry in the hpicfL3MacConfigIfEntry contains the 
.1.3.6.1.4.1.11.2.14.11.5.1.36.1.1.1.1,HP-ICF-L3MAC-MIB::hpicfL3MacConfigIfAdvTimer,Integer32,read-write,,current,,Timeout in seconds when an advertisement packets will be sent out with the ifRcvAddressAddress of this entry as the source  MAC so that the downstream switches learn this MAC-address.
.1.3.6.1.4.1.11.2.14.11.5.1.36.2,HP-ICF-L3MAC-MIB::hpicfL3MacConfigConformance,,,,,,
.1.3.6.1.4.1.11.2.14.11.5.1.36.2.1,HP-ICF-L3MAC-MIB::hpicfL3MacConfigMIBCompliances,,,,,,
.1.3.6.1.4.1.11.2.14.11.5.1.36.2.1.1,HP-ICF-L3MAC-MIB::hpicfL3MacConfigMIBCompliance,,,,,,The compliance statement for HP routers running L3-Mac feature and implementing the HP-ICF-L3MAC-MIB.
.1.3.6.1.4.1.11.2.14.11.5.1.36.2.2,HP-ICF-L3MAC-MIB::hpicfL3MacConfigMIBGroups,,,,,,
.1.3.6.1.4.1.11.2.14.11.5.1.36.2.2.1,HP-ICF-L3MAC-MIB::hpicfL3MacConfigGroup,,,,,,A collection of HP proprietary objects to support L3-Mac feature on HP routers.
.1.3.6.1.4.1.11.2.14.11.5.1.37,HP-ICF-OID::hpicfArpProtect,,,,,,
.1.3.6.1.4.1.11.2.14.11.5.1.37.0,HP-ICF-ARP-PROTECT::hpicfArpProtectNotifications,,,,,,
.1.3.6.1.4.1.11.2.14.11.5.1.37.0.1,HP-ICF-ARP-PROTECT::hpicfArpProtectErrantReply,,,,,,An hpicfArpProtectErrantReply notification signifies that the ARP protection entity is enabled and has detected an errant ARP reply packet. The source and destination addresses from the packet header are included in the notification.
.1.3.6.1.4.1.11.2.14.11.5.1.37.1,HP-ICF-ARP-PROTECT::hpicfArpProtectObjects,,,,,,
.1.3.6.1.4.1.11.2.14.11.5.1.37.1.1,HP-ICF-ARP-PROTECT::hpicfArpProtectConfig,,,,,,
.1.3.6.1.4.1.11.2.14.11.5.1.37.1.1.1,HP-ICF-ARP-PROTECT::hpicfArpProtectGlobalCfg,,,,,,
.1.3.6.1.4.1.11.2.14.11.5.1.37.1.1.1.1,HP-ICF-ARP-PROTECT::hpicfArpProtectEnable,INTEGER,read-write,,current,true(1):false(2),The administrative status of the ARP Protection feature.
.1.3.6.1.4.1.11.2.14.11.5.1.37.1.1.1.2,HP-ICF-ARP-PROTECT::hpicfArpProtectVlanEnable,OCTET,read-write,,current,,The administrative status for Dynamic ARP Protection on each VLAN. There will be one bit in this string for each possible VLAN ID. Each octet within this value specifies a set of eight VLANs, with the first octet specifying VLAN IDs 1 through 8, the second octet specifying VLAN IDs 9 through 16, etc. Within each octet, the most significant bit represents the lowest numbered VLAN ID, and the least significant bit represents the highest numbered VLAN ID. Thus, each possible VLAN ID of the bridge is represented by a single bit within the value of this object. If that bit has a value of '1', then Dynamic ARP Protection is enabled on that VLAN; Dynamic ARP Protection is not enabled on the VLAN its bit has a value of '0'.
.1.3.6.1.4.1.11.2.14.11.5.1.37.1.1.1.3,HP-ICF-ARP-PROTECT::hpicfArpProtectValidation,BITS,read-write,,current,srcMac(0):dstMac(1):ip(2),Additional validation checks to perform on ARP packets during Dynamic ARP Protection. srcMac - Drop any ARP request or response packet where the source MAC address in the Ethernet header does not match the sender MAC address in the body of the ARP packet. dstMac - Drop any unicast ARP response packet where the destination MAC address in the Ethernet header does not match the target MAC address in the body of the ARP packet. ip - Drop any ARP packet where the sender IP address is invalid. Drop any ARP response packet where the target IP address is invalid. Invalid addresses include 0.0.0.0, 255.255.255.255, all IP multicast addresses, and all class E IP addresses. These checks are only performed for ARP packets received on untrusted ports in VLANs that are enabled for Dynamic ARP Protection. ARP packets received on trusted ports, and ARP packets in VLANs for which Dynamic ARP Protection is disabled, are forwarded without validation.
.1.3.6.1.4.1.11.2.14.11.5.1.37.1.1.1.4,HP-ICF-ARP-PROTECT::hpicfArpProtectErrantNotifyEnable,INTEGER,read-write,,current,enabled(1):disabled(2),Provides operational control of hpicfArpProtectErrantReply.
.1.3.6.1.4.1.11.2.14.11.5.1.37.1.1.2,HP-ICF-ARP-PROTECT::hpicfArpProtectPortTable,,not-accessible,,current,,Per-interface configuration for Dynamic ARP Protection.
.1.3.6.1.4.1.11.2.14.11.5.1.37.1.1.2.1,HP-ICF-ARP-PROTECT::hpicfArpProtectPortEntry,,not-accessible,ifIndex,current,,Dynamic ARP Protection configuration information for a single port.
.1.3.6.1.4.1.11.2.14.11.5.1.37.1.1.2.1.1,HP-ICF-ARP-PROTECT::hpicfArpProtectPortTrust,INTEGER,read-write,,current,true(1):false(2),This object indicates whether this port is trusted for Dynamic ARP Protection.
.1.3.6.1.4.1.11.2.14.11.5.1.37.1.2,HP-ICF-ARP-PROTECT::hpicfArpProtectStatus,,,,,,
.1.3.6.1.4.1.11.2.14.11.5.1.37.1.2.1,HP-ICF-ARP-PROTECT::hpicfArpProtectVlanStatTable,,not-accessible,,current,,Per-VLAN statistics for Dynamic ARP Protection.
.1.3.6.1.4.1.11.2.14.11.5.1.37.1.2.1.1,HP-ICF-ARP-PROTECT::hpicfArpProtectVlanStatEntry,,not-accessible,hpicfArpProtectVlanStatIndex,current,,Dynamic ARP Protection statistics for a single VLAN.
.1.3.6.1.4.1.11.2.14.11.5.1.37.1.2.1.1.1,HP-ICF-ARP-PROTECT::hpicfArpProtectVlanStatIndex,Unsigned32,not-accessible,,current,,This variable uniquely identifies the VLAN that the counters in this entry apply to. The VLAN identified by this object is the same VLAN as identified by the identical value in the dot1qVlanIndex object.
.1.3.6.1.4.1.11.2.14.11.5.1.37.1.2.1.1.2,HP-ICF-ARP-PROTECT::hpicfArpProtectVlanStatForwards,Counter32,read-only,,current,,The number of ARP packets received on untrusted ports in this VLAN that were successfully validated and forwarded. This count does not increment for VLANs for which Dynamic ARP Protection is not enabled.
.1.3.6.1.4.1.11.2.14.11.5.1.37.1.2.1.1.3,HP-ICF-ARP-PROTECT::hpicfArpProtectVlanStatBadPkts,Counter32,read-only,,current,,The number of ARP packets received on untrusted ports that were dropped because they were malformed in some way. This may include an unrecognized opcode, an unrecognized protocol type, an unrecognized hardware type, an invalid protocol address length, or an invalid hardware address length. This count does not increment for VLANs for which Dynamic ARP Protection is not enabled.
.1.3.6.1.4.1.11.2.14.11.5.1.37.1.2.1.1.4,HP-ICF-ARP-PROTECT::hpicfArpProtectVlanStatBadBindings,Counter32,read-only,,current,,The number of ARP packets received on untrusted ports that were dropped because they advertized a source IP-to-MAC binding that did not match a known, valid binding. This count does not increment for VLANs for which Dynamic ARP Protection is not enabled.
.1.3.6.1.4.1.11.2.14.11.5.1.37.1.2.1.1.5,HP-ICF-ARP-PROTECT::hpicfArpProtectVlanStatBadSrcMacs,Counter32,read-only,,current,,The number of ARP packets received on untrusted ports that were dropped because the source MAC address in the Ethernet header did not match the sender MAC address in the body of the ARP packet. This count does not increment when source MAC validation is not enabled. This count does not increment for VLANs for which Dynamic ARP Protection is not enabled.
.1.3.6.1.4.1.11.2.14.11.5.1.37.1.2.1.1.6,HP-ICF-ARP-PROTECT::hpicfArpProtectVlanStatBadDstMacs,Counter32,read-only,,current,,The number of unicast ARP response packets received on untrusted ports that were dropped because the destination MAC address in the Ethernet header did not match the target MAC address in the body of the ARP packet. This count does not increment when destination address validation is not enabled. This count does not increment for VLANs for which Dynamic ARP Protection is not enabled.
.1.3.6.1.4.1.11.2.14.11.5.1.37.1.2.1.1.7,HP-ICF-ARP-PROTECT::hpicfArpProtectVlanStatBadIpAddrs,Counter32,read-only,,current,,The number of ARP packets received on untrusted ports that were dropped because they contained an invalid sender IP address, or they contained an invalid target IP address in an ARP response. This count does not increment when IP address validation is not enabled. This count does not increment for VLANs for which Dynamic ARP Protection is not enabled.
.1.3.6.1.4.1.11.2.14.11.5.1.37.1.3,HP-ICF-ARP-PROTECT::hpicfArpProtectErrantCnt,Counter32,accessible-for-notify,,current,,A count of hpicfArpProtectErrantReply sent  from the ARP Protection entity to the SNMP entity. This count may differ from the count of notifications transmitted due to rate  limiting or configuration.
.1.3.6.1.4.1.11.2.14.11.5.1.37.1.4,HP-ICF-ARP-PROTECT::hpicfArpProtectErrantSrcMac,OCTET,accessible-for-notify,,current,,Errant source MAC address included in a hpicfArpProtectNotification.
.1.3.6.1.4.1.11.2.14.11.5.1.37.1.5,HP-ICF-ARP-PROTECT::hpicfArpProtectErrantSrcIpType,INTEGER,accessible-for-notify,,current,unknown(0):ipv4(1):ipv6(2):ipv4z(3):ipv6z(4):dns(16),IP Address type reported in hpicfArpProtectErrantSrcIp.
.1.3.6.1.4.1.11.2.14.11.5.1.37.1.6,HP-ICF-ARP-PROTECT::hpicfArpProtectErrantSrcIp,OCTET,accessible-for-notify,,current,,Errant source IP address included in a hpicfArpProtectNotification.
.1.3.6.1.4.1.11.2.14.11.5.1.37.1.7,HP-ICF-ARP-PROTECT::hpicfArpProtectErrantDestMac,OCTET,accessible-for-notify,,current,,Errant destination MAC address included in a hpicfArpProtectNotification.
.1.3.6.1.4.1.11.2.14.11.5.1.37.1.8,HP-ICF-ARP-PROTECT::hpicfArpProtectErrantDestIpType,INTEGER,accessible-for-notify,,current,unknown(0):ipv4(1):ipv6(2):ipv4z(3):ipv6z(4):dns(16),IP Address type reported in hpicfArpProtectErrantDestIp.
.1.3.6.1.4.1.11.2.14.11.5.1.37.1.9,HP-ICF-ARP-PROTECT::hpicfArpProtectErrantDestIp,OCTET,accessible-for-notify,,current,,Errant destination IP address included in a hpicfArpProtectNotification.
.1.3.6.1.4.1.11.2.14.11.5.1.37.2,HP-ICF-ARP-PROTECT::hpicfArpProtectConformance,,,,,,
.1.3.6.1.4.1.11.2.14.11.5.1.37.2.1,HP-ICF-ARP-PROTECT::hpicfArpProtectGroups,,,,,,
.1.3.6.1.4.1.11.2.14.11.5.1.37.2.1.1,HP-ICF-ARP-PROTECT::hpicfArpProtectBaseGroup,,,,,,A collection of objects for configuring and monitoring the base Dynamic ARP Protection functionality.
.1.3.6.1.4.1.11.2.14.11.5.1.37.2.1.2,HP-ICF-ARP-PROTECT::hpicfArpProtectionNotifications,,,,,,A group of Notifications whose implementation is  mandatory when HP-ICF-ARP-PROTECTION is  implemented.
.1.3.6.1.4.1.11.2.14.11.5.1.37.2.2,HP-ICF-ARP-PROTECT::hpicfArpProtectCompliances,,,,,,
.1.3.6.1.4.1.11.2.14.11.5.1.37.2.2.1,HP-ICF-ARP-PROTECT::hpicfArpProtectCompliance,,,,,,The compliance statement for HP switches that support Dynamic ARP Protection.
.1.3.6.1.4.1.11.2.14.11.5.1.38,HP-ICF-OID::hpicfSnmpMIB,,,,,,
.1.3.6.1.4.1.11.2.14.11.5.1.38.0,HP-ICF-SNMP-MIB::hpicfSnmpNotification,,,,,,
.1.3.6.1.4.1.11.2.14.11.5.1.38.0.1,HP-ICF-SNMP-MIB::hpicfSnmpAuthFail,,,,,,The switch sends this notification when an SNMP  SET command fails at the authorization check stage. This notification applies to SETs within the hpicf tree that  are network security related. This object is controlled by hpicfSnmpAuthNotifyEnable
.1.3.6.1.4.1.11.2.14.11.5.1.38.1,HP-ICF-SNMP-MIB::hpicfSnmpObjects,,,,,,
.1.3.6.1.4.1.11.2.14.11.5.1.38.1.1,HP-ICF-SNMP-MIB::hpicfSnmpConfig,,,,,,
.1.3.6.1.4.1.11.2.14.11.5.1.38.1.1.1,HP-ICF-SNMP-MIB::hpicfSnmpGlobalCfg,,,,,,
.1.3.6.1.4.1.11.2.14.11.5.1.38.1.1.1.1,HP-ICF-SNMP-MIB::hpicfSnmpResponseSourceAddrPolicyTable,,not-accessible,,current,,A table of entries used to configure the policy for selecting source address while sending SNMP response.  When this entry is configured, the source address field  in the IP PKT header get modified based on the configured option. There are 4 valid options that can be configured  for ipv4 and ipv6 networks a) rfc1517  This is the default behavior if no other policy is configured. In this case the source address will be  the address of the interface from which packet goes  out of the box.  b) user configured IP address In this case the configured address will be used as  source address in the SNMP response. c) user configured interface In this case the IP address configured on the specified interface will be used as source address in the SNMP  response. In case of multinet interface then smallest IP address present on the interface in lexicographical  order will be used as source address while sending SNMP responses for requests. d) dst_ip_of_request In this case, the destination IP address present in  the IP header of received SNMP request will be used  as source address in the SNMP response.
.1.3.6.1.4.1.11.2.14.11.5.1.38.1.1.1.1.1,HP-ICF-SNMP-MIB::hpicfSnmpResponseSourceAddrPolicyEntry,,not-accessible,hpicfSnmpResponseSourceAddressType,current,,An entry in the table, containing information about a single source address. This table allows only 2 values  that can be used as index to this table. These are: 1) hpicfSnmpResponseSourceAddressType = ipv4 Where user wants to configure the source address type  used while sending the SNMP response on IPV4 network. 2) hpicfSnmpResponseSourceAddressType = ipv6 Where user wants to configure the source address type  used while sending the SNMP response on IPV6 network.
.1.3.6.1.4.1.11.2.14.11.5.1.38.1.1.1.1.1.1,HP-ICF-SNMP-MIB::hpicfSnmpResponseSourceAddressType,INTEGER,accessible-for-notify,,current,unknown(0):ipv4(1):ipv6(2):ipv4z(3):ipv6z(4):dns(16),We allow only 2 values for this object as an index for  hpicfSnmpResponseSourceAddrPolicyEntry - 1) hpicfSnmpResponseSourceAddressType = ipv4 Where user wants to configure the source address type  used while sending the SNMP response on IPV4 network 2) hpicfSnmpResponseSourceAddressType = ipv6 Where user wants to configure the source address type  used while sending the SNMP response on IPV6 network.
.1.3.6.1.4.1.11.2.14.11.5.1.38.1.1.1.1.1.2,HP-ICF-SNMP-MIB::hpicfSnmpResponseSourceAddrPolicy,INTEGER,read-create,,current,rfc1517(1):configuredIP(2):configuredInterface(3):dstIpOfRequest(4), This specifies the policy for selecting the source  address for outgoing SNMP responses. a) rfc1517  This is the default behavior if no other policy is configured. In this case the source address will be  the address of the interface from which packet goes  out of the box.  b) configuredIP By setting this value will enable the SNMP agent to use IP addresses specified in hpicfSnmpResponseSourceAddress object as source address while sending the response. hpicfSnmpResponseSourceAddress must be set to a valid and active IP address before setting policy to configuredIP. c) configuredInterface By setting this value will enable the SNMP agent to use IP addresses configured on the interface specified by  hpicfSnmpResponseSourceAddrIfIndex object as source address while sending the response. In case of multinet interface then smallest IP  address present on the interface in lexicographical  order will be used as source address while sending SNMP responses for requests. hpicfSnmpResponseSourceAddrIfIndex object must be set to a valid loopback interface number before setting policy to configuredInterface. d) dst_ip_of_request In this case, the destination IP address present in  the IP header of received SNMP request will be used as  source address in the SNMP response.
.1.3.6.1.4.1.11.2.14.11.5.1.38.1.1.1.1.1.3,HP-ICF-SNMP-MIB::hpicfSnmpResponseSourceAddress,OCTET,read-create,,current,,This object is used to set the IP address which will be  used as source IP while sending the SNMP response. This object should be used in conjunction with the  hpicfSnmpResponseSourceAddressType and  hpicfSnmpResponseSourceAddrPolicy. 
.1.3.6.1.4.1.11.2.14.11.5.1.38.1.1.1.1.1.4,HP-ICF-SNMP-MIB::hpicfSnmpResponseSourceAddrIfIndex,Integer32,read-create,,current,,This object is used to set the interface whose IP address will be used as source IP while sending the SNMP response. This object should be used in conjunction with the  hpicfSnmpResponseSourceAddressType and  hpicfSnmpResponseSourceAddrPolicy.
.1.3.6.1.4.1.11.2.14.11.5.1.38.1.1.1.2,HP-ICF-SNMP-MIB::hpicfSnmpTrapSourceAddrTable,,not-accessible,,current,,A table of entries used to configure the source address  used while generating SNMP Traps. When this entry is  configured, the source address field in the IP PKT header  get modified based on the configured option.
.1.3.6.1.4.1.11.2.14.11.5.1.38.1.1.1.2.1,HP-ICF-SNMP-MIB::hpicfSnmpTrapSourceAddrEntry,,not-accessible,hpicfSnmpTrapSourceAddressType,current,,An entry in the table, containing information about a single source address. This table allows only 2 values  that can be used as index to this table. These are: 1) hpicfSnmpResponseSourceAddressType = ipv4 Where user wants to configure the source address  used while sending the SNMP TRAPs on IPV4 network. 2) hpicfSnmpResponseSourceAddressType = ipv6 Where user wants to configure the source address  used while sending the SNMP TRAPs on IPV6 network.
.1.3.6.1.4.1.11.2.14.11.5.1.38.1.1.1.2.1.1,HP-ICF-SNMP-MIB::hpicfSnmpTrapSourceAddressType,INTEGER,accessible-for-notify,,current,unknown(0):ipv4(1):ipv6(2):ipv4z(3):ipv6z(4):dns(16), This table allows only 2 values  that can be used as index to this table. These are: 1) hpicfSnmpResponseSourceAddressType = ipv4 Where user wants to configure the source address  used while sending the SNMP TRAPs on IPV4 network. 2) hpicfSnmpResponseSourceAddressType = ipv6 Where user wants to configure the source address  used while sending the SNMP TRAPs on IPV6 network.
.1.3.6.1.4.1.11.2.14.11.5.1.38.1.1.1.2.1.2,HP-ICF-SNMP-MIB::hpicfSnmpTrapSourceAddrPolicy,INTEGER,read-create,,current,rfc1517(1):configuredIP(2):configuredInterface(3):dstIpOfRequest(4), This specifies the policy for selecting the source  address for outgoing SNMP responses. a) rfc1517  This is the default behavior if no other policy is configured. In this case the source address will be  the address of the interface from which packet goes  out of the box.  b) configuredIP By setting this value will enable the SNMP agent to use IP addresses specified in hpicfSnmpResponseSourceAddress object as source address while sending the response. hpicfSnmpTrapSourceAddress must be set to a valid and active ip address before setting policy to configuredIP. c) configuredInterface By setting this value will enable the SNMP agent to use IP addresses configured on the interface specified by  hpicfSnmpResponseSourceAddrIfIndex object as source address while sending the response. In case of multinet interface then smallest IP  address present on the interface in lexicographical  order will be used as source address while sending SNMP responses for requests. hpicfSnmpTrapSourceAddrIfIndex object must be set to a valid loopback interface number before setting policy to configuredInterface.
.1.3.6.1.4.1.11.2.14.11.5.1.38.1.1.1.2.1.3,HP-ICF-SNMP-MIB::hpicfSnmpTrapSourceAddress,OCTET,read-create,,current,,This object is used to set the IP address which will be  used as source IP while sending the SNMP TRAPs. This object should be used in conjunction with the  hpicfSnmpResponseSourceAddressType and  hpicfSnmpTrapSourceAddrPolicy. 
.1.3.6.1.4.1.11.2.14.11.5.1.38.1.1.1.2.1.4,HP-ICF-SNMP-MIB::hpicfSnmpTrapSourceAddrIfIndex,Integer32,read-create,,current,,This object is used to set the interface whose IP address will be used as source IP while sending the SNMP TRAPs. This object should be used in conjunction with the  hpicfSnmpResponseSourceAddressType and hpicfSnmpTrapSourceAddrPolicy.
.1.3.6.1.4.1.11.2.14.11.5.1.38.1.1.1.3,HP-ICF-SNMP-MIB::hpicfSnmpAuthNotifyEnable,INTEGER,read-write,,current,enabled(1):disabled(2),Controls whether hpicfSnmpAuthFail notifications will be generated. The default value is 1 (Enabled). A value of 2 represents  Disabled. Writing this object requires authentication, such  as provided by SNMPv3.  NOTE that hpicfSnmpAuthFail and snmpEnableAuthenTraps (RFC-1157) are mutually exclusive. While they may both be disabled, only one may be enabled at any given time. Notifications enabled by hpicfSnmpAuthFail are more comprehensive and are therefore recommended.
.1.3.6.1.4.1.11.2.14.11.5.1.38.1.2,HP-ICF-SNMP-MIB::hpicfSnmpNotificationObjects,,,,,,
.1.3.6.1.4.1.11.2.14.11.5.1.38.1.2.1,HP-ICF-SNMP-MIB::hpicfSnmpAuthFailCount,Counter32,accessible-for-notify,,current,,A count of SNMP authorization failures detected by the SNMP entity.
.1.3.6.1.4.1.11.2.14.11.5.1.38.1.2.2,HP-ICF-SNMP-MIB::hpicfSnmpAuthFailIPType,INTEGER,accessible-for-notify,,current,unknown(0):ipv4(1):ipv6(2):ipv4z(3):ipv6z(4):dns(16),Type of IP address contained in hpicfSnmpAuthFailIP.
.1.3.6.1.4.1.11.2.14.11.5.1.38.1.2.3,HP-ICF-SNMP-MIB::hpicfSnmpAuthFailIP,OCTET,accessible-for-notify,,current,,IP address of sender of message that failed authentication.
.1.3.6.1.4.1.11.2.14.11.5.1.38.2,HP-ICF-SNMP-MIB::hpicfSnmpConformance,,,,,,
.1.3.6.1.4.1.11.2.14.11.5.1.38.2.1,HP-ICF-SNMP-MIB::hpicfSnmpCompliances,,,,,,
.1.3.6.1.4.1.11.2.14.11.5.1.38.2.1.1,HP-ICF-SNMP-MIB::hpicfSnmpCompliance,,,,,,A compliance statement for HP Routing switches with SNMP
.1.3.6.1.4.1.11.2.14.11.5.1.38.2.1.2,HP-ICF-SNMP-MIB::hpicfSnmpCompliance1,,,,,,A compliance statement for HP Routing switches with SNMP
.1.3.6.1.4.1.11.2.14.11.5.1.38.2.2,HP-ICF-SNMP-MIB::hpicfSnmpCompliancesGroups,,,,,,
.1.3.6.1.4.1.11.2.14.11.5.1.38.2.2.1,HP-ICF-SNMP-MIB::hpicfSnmpResponseSourceAddrTableCompliancesGroup,,,,,,A collection of objects allowing configuration of policies in the switch for selecting the source address used while  generating SNMP response
.1.3.6.1.4.1.11.2.14.11.5.1.38.2.2.2,HP-ICF-SNMP-MIB::hpicfSnmpTrapSourceAddrTableCompliancesGroup,,,,,,A collection of objects allowing configuration of source addresses for SNMP traps generated by the switch.
.1.3.6.1.4.1.11.2.14.11.5.1.38.2.2.3,HP-ICF-SNMP-MIB::hpicfSnmpResponseSourceAddrTableGroup,,,,,,Description.
.1.3.6.1.4.1.11.2.14.11.5.1.38.2.2.4,HP-ICF-SNMP-MIB::hpicfSnmpTrapSourceAddrTableGroup,,,,,,Description.
.1.3.6.1.4.1.11.2.14.11.5.1.38.2.2.5,HP-ICF-SNMP-MIB::hpicfSnmpNotifyObjectGroup,,,,,,The operational status of hpicfSwitchAuthServerFail notifications. The default value is 1 (Enabled). A value of 2 represents  Disabled. Writing this object requires authentication, such  as provided by SNMPv3.
.1.3.6.1.4.1.11.2.14.11.5.1.38.2.2.6,HP-ICF-SNMP-MIB::hpicfSnmpNotificationGroup,,,,,,Description.
.1.3.6.1.4.1.11.2.14.11.5.1.39,HP-ICF-OID::hpicfIpLockdown,,,,,,
.1.3.6.1.4.1.11.2.14.11.5.1.39.0,HP-ICF-IP-LOCKDOWN-MIB::hpicfIpLockTraps,,,,,,
.1.3.6.1.4.1.11.2.14.11.5.1.39.0.1,HP-ICF-IP-LOCKDOWN-MIB::hpicfIpLockTrapsObjects,,,,,,
.1.3.6.1.4.1.11.2.14.11.5.1.39.0.1.1,HP-ICF-IP-LOCKDOWN-MIB::hpicfIpLockOutOfResourceSource,INTEGER,accessible-for-notify,,current,dhcpsnooping(1):iplockdown(2),The identifier of the reason for out of hardware resource condition
.1.3.6.1.4.1.11.2.14.11.5.1.39.0.1.2,HP-ICF-IP-LOCKDOWN-MIB::hpicfIpLockOutOfResources,,,,,,This trap indicates that unexpected running out of hardware resources to program a Dynamic IP Lockdown rule. of 'hpicfIpLockTrapCtrl' object. Implementation of this trap is optional.
.1.3.6.1.4.1.11.2.14.11.5.1.39.0.1.3,HP-ICF-IP-LOCKDOWN-MIB::hpicfIpLockErrantNotify,,,,,,This notification indicates a host was denied  access to the switch based on Dynamic Lockdown Protection rules. This notification trap is controlled by the  state of the 'hpicfIpLockTrapCtrl' object. Implementation of this trap is optional.
.1.3.6.1.4.1.11.2.14.11.5.1.39.0.1.4,HP-ICF-IP-LOCKDOWN-MIB::hpicfIpLockErrantNotifyObjects,,,,,,
.1.3.6.1.4.1.11.2.14.11.5.1.39.0.1.4.1,HP-ICF-IP-LOCKDOWN-MIB::hpicfIpLockNotifyCount,Counter32,accessible-for-notify,,current,,A count of 'hpicfIpLockErrantNotify' sent from  the Dynamic Ip Lockdown Protection entity to the SNMP entity since boot.
.1.3.6.1.4.1.11.2.14.11.5.1.39.0.1.4.2,HP-ICF-IP-LOCKDOWN-MIB::hpicfIpLockNotifyPort,Integer32,accessible-for-notify,,current,,The port for which this 'hpicfIpLockErrantNotify' applies.
.1.3.6.1.4.1.11.2.14.11.5.1.39.0.1.4.3,HP-ICF-IP-LOCKDOWN-MIB::hpicfIpLockNotifySrcIpType,INTEGER,accessible-for-notify,,current,unknown(0):ipv4(1):ipv6(2):ipv4z(3):ipv6z(4):dns(16),The type of IP address contained in 'hpicfIpLockNotifySrcIpAddress'. The only values expected are ipv4 or ipv6.
.1.3.6.1.4.1.11.2.14.11.5.1.39.0.1.4.4,HP-ICF-IP-LOCKDOWN-MIB::hpicfIpLockNotifySrcIpAddress,OCTET,accessible-for-notify,,current,,The source IP address for which this 'hpicfIpLockErrantNotify' applies.
.1.3.6.1.4.1.11.2.14.11.5.1.39.0.1.4.5,HP-ICF-IP-LOCKDOWN-MIB::hpicfIpLockNotifyDstIpType,INTEGER,accessible-for-notify,,current,unknown(0):ipv4(1):ipv6(2):ipv4z(3):ipv6z(4):dns(16),The type of IP address contained in  'hpicfIpLockNotifyDstIpAddress'. The only values expected are ipv4 or ipv6.
.1.3.6.1.4.1.11.2.14.11.5.1.39.0.1.4.6,HP-ICF-IP-LOCKDOWN-MIB::hpicfIpLockNotifyDstIpAddress,OCTET,accessible-for-notify,,current,,The destination IP address for which this  'hpicfIpLockErrantNotify' applies.
.1.3.6.1.4.1.11.2.14.11.5.1.39.0.1.4.7,HP-ICF-IP-LOCKDOWN-MIB::hpicfIpLockNotifyMacAddress,OCTET,accessible-for-notify,,current,,The source MAC address for which this  'hpicfIpLockErrantNotify' applies.
.1.3.6.1.4.1.11.2.14.11.5.1.39.0.1.4.8,HP-ICF-IP-LOCKDOWN-MIB::hpicfIpLockNotifyPktCount,Counter32,accessible-for-notify,,current,,This object indicates the number of packets 
.1.3.6.1.4.1.11.2.14.11.5.1.39.1,HP-ICF-IP-LOCKDOWN-MIB::hpicfIpLockObjects,,,,,,
.1.3.6.1.4.1.11.2.14.11.5.1.39.1.1,HP-ICF-IP-LOCKDOWN-MIB::hpicfIpLockConfig,,,,,,
.1.3.6.1.4.1.11.2.14.11.5.1.39.1.1.1,HP-ICF-IP-LOCKDOWN-MIB::hpicfIpLockEnable,INTEGER,read-write,,current,true(1):false(2),The administrative status of the Dynamic IP Lockdown feature.
.1.3.6.1.4.1.11.2.14.11.5.1.39.1.1.2,HP-ICF-IP-LOCKDOWN-MIB::hpicfIpLockPortTable,,not-accessible,,current,,Per-interface configuration for Dynamic IP Lockdown.
.1.3.6.1.4.1.11.2.14.11.5.1.39.1.1.2.1,HP-ICF-IP-LOCKDOWN-MIB::hpicfIpLockPortEntry,,not-accessible,ifIndex,current,,Dynamic IP Lockdown configuration information  for a single port.
.1.3.6.1.4.1.11.2.14.11.5.1.39.1.1.2.1.1,HP-ICF-IP-LOCKDOWN-MIB::hpicfIpLockPortEnable,INTEGER,read-write,,current,true(1):false(2),This object indicates whether this port is enabled for Dynamic IP Lockdown.
.1.3.6.1.4.1.11.2.14.11.5.1.39.1.1.3,HP-ICF-IP-LOCKDOWN-MIB::hpicfIpLockTrapCntl,BITS,read-write,,obsolete,outOfResource(0),********* THIS OBJECT IS OBSOLETED ********** This object has been obsoleted in favor of 'hpicfIpLockTrapCtrl'. Controls generation of SNMP traps for events defined in this MIB. The set bit means 'enabled'. - OutOfResource(0) The state of this bit specifies whether the notification trap is allowed to be send when one runs out of resources programming a dynamic IP Lockdown rule..
.1.3.6.1.4.1.11.2.14.11.5.1.39.1.1.4,HP-ICF-IP-LOCKDOWN-MIB::hpicfIpLockTrapCtrl,INTEGER,read-write,,current,true(1):false(2),Controls generation of SNMP notifications for  traps defined in this MIB.
.1.3.6.1.4.1.11.2.14.11.5.1.39.1.2,HP-ICF-IP-LOCKDOWN-MIB::hpicfIpLockStatus,,,,,,
.1.3.6.1.4.1.11.2.14.11.5.1.39.1.2.1,HP-ICF-IP-LOCKDOWN-MIB::hpicfIpLockPortStatusTable,,not-accessible,,current,,Per-interface status for Dynamic IP Lockdown.
.1.3.6.1.4.1.11.2.14.11.5.1.39.1.2.1.1,HP-ICF-IP-LOCKDOWN-MIB::hpicfIpLockPortStatusEntry,,not-accessible,ifIndex,current,,Dynamic IP Lockdown status information for a single port.
.1.3.6.1.4.1.11.2.14.11.5.1.39.1.2.1.1.1,HP-ICF-IP-LOCKDOWN-MIB::hpicfIpLockPortOperStatus,BITS,read-only,,current,active(0):noDsnoop(1):trustedPort(2):noSnoopingVlan(3),This object indicates the various states of the current operating mode of Dynamic IP Lockdown on  this port. When no bits are set, the status of this feature shall be 'disabled'. Each status is  described below: active - Dynamic IP Lockdown is active  on this port. noDsnoop - Dynamic IP Lockdown is enabled  on this port, but DHCP Snooping  is not globally enabled. trustedPort - Dynamic IP Lockdown is enabled  on this port, but is not active  because the port is a DHCP  Snooping trusted port. noSnoopingVlan - Dynamic IP Lockdown is enabled  on this port, but is not active because the port is not a  member of any VLAN with DHCP Snooping enabled.
.1.3.6.1.4.1.11.2.14.11.5.1.39.1.2.2,HP-ICF-IP-LOCKDOWN-MIB::hpicfIpLockAddrTable,,not-accessible,,current,,Table of source address bindings on ports where Dynamic IP Lockdown is active that are currently permitted.
.1.3.6.1.4.1.11.2.14.11.5.1.39.1.2.2.1,HP-ICF-IP-LOCKDOWN-MIB::hpicfIpLockAddrEntry,,not-accessible,hpicfIpLockAddrPort:hpicfIpLockAddrType:hpicfIpLockAddrIpAddress,current,,An entry in the table containing a single permitted source address binding.
.1.3.6.1.4.1.11.2.14.11.5.1.39.1.2.2.1.1,HP-ICF-IP-LOCKDOWN-MIB::hpicfIpLockAddrPort,Integer32,read-only,,current,,The port that this address binding is permitted on.
.1.3.6.1.4.1.11.2.14.11.5.1.39.1.2.2.1.2,HP-ICF-IP-LOCKDOWN-MIB::hpicfIpLockAddrType,INTEGER,read-only,,current,unknown(0):ipv4(1):ipv6(2):ipv4z(3):ipv6z(4):dns(16),The type of IP address contained in hpicfIpLockAddrIpAddress. The only values expected are ipv4 or ipv6.
.1.3.6.1.4.1.11.2.14.11.5.1.39.1.2.2.1.3,HP-ICF-IP-LOCKDOWN-MIB::hpicfIpLockAddrIpAddress,OCTET,read-only,,current,,A source IP address permitted on this port. The type of address contained in this object is indicated by hpicfIpLockAddrType.
.1.3.6.1.4.1.11.2.14.11.5.1.39.1.2.2.1.4,HP-ICF-IP-LOCKDOWN-MIB::hpicfIpLockAddrVlan,Unsigned32,read-only,,current,,The VLAN ID on which this source address is permitted on this port.
.1.3.6.1.4.1.11.2.14.11.5.1.39.1.2.2.1.5,HP-ICF-IP-LOCKDOWN-MIB::hpicfIpLockAddrMacAddress,OCTET,read-only,,current,,The source MAC address that is permitted for this source IP address on this port.
.1.3.6.1.4.1.11.2.14.11.5.1.39.1.2.2.1.6,HP-ICF-IP-LOCKDOWN-MIB::hpicfIpLockResourceAvailable,INTEGER,read-only,,current,true(1):false(2),TRUE indicates that resources were available to add binding. FALSE indicates that resources were not available
.1.3.6.1.4.1.11.2.14.11.5.1.39.2,HP-ICF-IP-LOCKDOWN-MIB::hpicfIpLockConformance,,,,,,
.1.3.6.1.4.1.11.2.14.11.5.1.39.2.1,HP-ICF-IP-LOCKDOWN-MIB::hpicfIpLockGroups,,,,,,
.1.3.6.1.4.1.11.2.14.11.5.1.39.2.1.1,HP-ICF-IP-LOCKDOWN-MIB::hpicfIpLockBaseGroup,,,,,,A collection of objects for configuring and monitoring the base Dynamic IP Lockdown functionality.
.1.3.6.1.4.1.11.2.14.11.5.1.39.2.1.2,HP-ICF-IP-LOCKDOWN-MIB::hpicfIpLockTrapsGroup,,,,,,A collection of trap objects for Dynamic  IP Lockdown.
.1.3.6.1.4.1.11.2.14.11.5.1.39.2.1.3,HP-ICF-IP-LOCKDOWN-MIB::hpicfIpLockTrapObjectsGroup,,,,,,A collection of objects for receiving notification  information in regards to the Dynamic IP Lockdown  functionality.
.1.3.6.1.4.1.11.2.14.11.5.1.39.2.1.4,HP-ICF-IP-LOCKDOWN-MIB::hpicfIpLockObsoleteGroup,,,,,,These objects are obsolete and are no longer used.
.1.3.6.1.4.1.11.2.14.11.5.1.39.2.2,HP-ICF-IP-LOCKDOWN-MIB::hpicfIpLockCompliances,,,,,,
.1.3.6.1.4.1.11.2.14.11.5.1.39.2.2.1,HP-ICF-IP-LOCKDOWN-MIB::hpicfIpLockCompliance,,,,,,The compliance statement for HP  switches that support Dynamic IP Lockdown.
.1.3.6.1.4.1.11.2.14.11.5.1.39.2.2.2,HP-ICF-IP-LOCKDOWN-MIB::hpicfIpLockTrapCompliance,,,,,,The compliance statement for HP  switches that support Dynamic IP Lockdown Notify group .
.1.3.6.1.4.1.11.2.14.11.5.1.40,HP-ICF-OID::hpicfProviderBridge,,,,,,
.1.3.6.1.4.1.11.2.14.11.5.1.40.1,HP-ICF-PROVIDER-BRIDGE::hpicfProviderBridgeObjects,,,,,,
.1.3.6.1.4.1.11.2.14.11.5.1.40.1.1,HP-ICF-PROVIDER-BRIDGE::hpicfProviderBridgeBase,,,,,,
.1.3.6.1.4.1.11.2.14.11.5.1.40.1.1.1,HP-ICF-PROVIDER-BRIDGE::hpicfProviderBridgeType,INTEGER,read-write,,current,vlanBridge(1):svlanBridge(2):providerEdgeBridge(3):vlanSvlanBridge(4),hpicfProviderBridgeType controls bridge mode configuration. A device can function in one of the 4 modes defined above. vlanBridge - provider bridge feature disabled mode, all vlans are cvlans.  svlanBridge - provider bridge mode with only svlans.  providerEdgeBridge - provider bridge mode with cvlans and  svlans and mappings between them.   vlanSvlanBridge - provider bridge mode with independent  cvlans and svlans on the same device.  Changing from one mode to another will empty out the  current configuration information and reboot the device.
.1.3.6.1.4.1.11.2.14.11.5.1.40.1.1.2,HP-ICF-PROVIDER-BRIDGE::hpicfProviderBridgeEtherType,Integer32,read-write,,current,,Defines the 2-byte ethertype for provider tagged frames. Changing from one tag-type to another with a given  hpicfProviderBridgeType configuration will save current configurations and reboot the device, the new tag-type will take effect subsequently.
.1.3.6.1.4.1.11.2.14.11.5.1.40.1.1.3,HP-ICF-PROVIDER-BRIDGE::hpicfProviderBridgeVlanTypeTable,,not-accessible,,current,,HP proprietaty extension to dot1qVlanStaticTable  to classify a vlan as a cvlan or an svlan
.1.3.6.1.4.1.11.2.14.11.5.1.40.1.1.3.1,HP-ICF-PROVIDER-BRIDGE::hpicfProviderBridgeVlanTypeEntry,,not-accessible,,current,,An entry for HP Specific extension table
.1.3.6.1.4.1.11.2.14.11.5.1.40.1.1.3.1.1,HP-ICF-PROVIDER-BRIDGE::hpicfProviderBridgeVlanType,INTEGER,read-write,,current,cvlan(1):svlan(2),Indicates the vlantype.
.1.3.6.1.4.1.11.2.14.11.5.1.40.1.1.4,HP-ICF-PROVIDER-BRIDGE::hpicfProviderBridgePortTable,,not-accessible,,current,,This specifies the designated type of an externally  accessible port on a Provider Bridge.
.1.3.6.1.4.1.11.2.14.11.5.1.40.1.1.4.1,HP-ICF-PROVIDER-BRIDGE::hpicfProviderBridgePortEntry,,not-accessible,ifIndex,current,,An entry that specifies the designated type of an  externally accessible port on a Provider Bridge.
.1.3.6.1.4.1.11.2.14.11.5.1.40.1.1.4.1.1,HP-ICF-PROVIDER-BRIDGE::hpicfProviderBridgePortType,INTEGER,read-write,,current,customer-edge(1):customer-network(2):provider-network(3),The type of an externally accessible port on  a Provider Bridge. A customer-edge port is a C-VLAN component Port  on a Provider Edge Bridge that is connected to customer owned equipment and receives and transmits  frames for a single customer. Designating a port as a  Customer Edge Port implies Provider Edge Bridge  functionality and, specifically, the existence of a  C-VLAN component associated with that port. This  C-VLAN component is uniquely identified within the  Bridge by the port number of the associated Customer  Edge Port. A customer-network port is an S-VLAN component Port  on a Provider Bridge or within a Provider Edge Bridge that receives and transmits frame for a  single customer. A provider-network port is an S-VLAN component Port  on a Provider Bridge that can transmit and receive frames for multiple customers.
.1.3.6.1.4.1.11.2.14.11.5.1.40.2,HP-ICF-PROVIDER-BRIDGE::hpicfProviderBridgeConformance,,,,,,
.1.3.6.1.4.1.11.2.14.11.5.1.40.2.1,HP-ICF-PROVIDER-BRIDGE::hpicfProviderBridgeGroups,,,,,,
.1.3.6.1.4.1.11.2.14.11.5.1.40.2.1.1,HP-ICF-PROVIDER-BRIDGE::hpicfProviderBridgeBaseGroup,,,,,,Basic Provider Bridge configuration information.
.1.3.6.1.4.1.11.2.14.11.5.1.40.2.2,HP-ICF-PROVIDER-BRIDGE::hpicfProviderBridgeCompliances,,,,,,
.1.3.6.1.4.1.11.2.14.11.5.1.40.2.2.1,HP-ICF-PROVIDER-BRIDGE::hpicfProviderBridgeCompliance,,,,,,The compliance statement for HP Switches with IEEE standard Provider Bridge MIBs.
.1.3.6.1.4.1.11.2.14.11.5.1.41,HP-ICF-OID::hpicfGppcMIB,,,,,,
.1.3.6.1.4.1.11.2.14.11.5.1.41.1,HP-ICF-GPPC-MIB::hpicfGppcConformance,,,,,,
.1.3.6.1.4.1.11.2.14.11.5.1.41.1.1,HP-ICF-GPPC-MIB::hpicfGppcMIBCompliances,,,,,,
.1.3.6.1.4.1.11.2.14.11.5.1.41.1.1.1,HP-ICF-GPPC-MIB::hpicfGppcMIBCompliance,,,,,,The compliance statement for HP routers implementing the HP-ICF-GPPC-MIB.
.1.3.6.1.4.1.11.2.14.11.5.1.41.1.2,HP-ICF-GPPC-MIB::hpicfGppcMIBGroups,,,,,,
.1.3.6.1.4.1.11.2.14.11.5.1.41.1.2.1,HP-ICF-GPPC-MIB::hpicfGppcGroup,,,,,,A collection of HP proprietary objects to support GPPC.
.1.3.6.1.4.1.11.2.14.11.5.1.41.2,HP-ICF-GPPC-MIB::hpicfGppcAppControlTable,,not-accessible,,current,,The application control table. This keeps track of the applications that use GPPC, the policies set by these applications, and information on where/when/how to apply these policies. This information includes the interfaces and VLANs where the policy should be applied, whether it should be applied at ingress or egress, and when it should expire.
.1.3.6.1.4.1.11.2.14.11.5.1.41.2.1,HP-ICF-GPPC-MIB::hpicfGppcAppControlEntry,,not-accessible,hpicfGppcAcAppName:hpicfGppcAcAppInstance:hpicfGppcAcPolicyName,current,,An entry in the application control table.
.1.3.6.1.4.1.11.2.14.11.5.1.41.2.1.1,HP-ICF-GPPC-MIB::hpicfGppcAcAppName,OCTET,not-accessible,,current,,Name of the application that last modified this row. All applications of the same type should use the same name and should use different instance identifiers to identify themselves uniquely. This is a printable string up to 16 bytes in size.
.1.3.6.1.4.1.11.2.14.11.5.1.41.2.1.2,HP-ICF-GPPC-MIB::hpicfGppcAcAppInstance,OCTET,not-accessible,,current,,Instance identifier of the application. This is used to distinguish between different instances of the same application. This is a printable string up to 16 bytes in size.
.1.3.6.1.4.1.11.2.14.11.5.1.41.2.1.3,HP-ICF-GPPC-MIB::hpicfGppcAcPolicyName,OCTET,not-accessible,,current,,Name of the policy. Each policy is uniquely identified by its name. It is possible to apply the same policy in different manners to different interfaces and VLANs. This is a printable string up to 64 characters in size.
.1.3.6.1.4.1.11.2.14.11.5.1.41.2.1.4,HP-ICF-GPPC-MIB::hpicfGppcAcIngressIfList,OCTET,read-create,,current,,List of interfaces to which this policy applies at ingress.
.1.3.6.1.4.1.11.2.14.11.5.1.41.2.1.5,HP-ICF-GPPC-MIB::hpicfGppcAcIngressVlanMap1k,OCTET,read-create,,current,,A string of octets containing one bit per VLAN for VLANS with vlan index values of 0 through 1023. The first octet corresponds to VLANs with vlan index values of 0 through 7, the second octet to VLANs 8 through 15, etc. The most significant bit of each octet corresponds to the lowest vlan index value in that octet. For each VLAN that this policy should apply to at ingress, the corresponding bit is set to '1'.
.1.3.6.1.4.1.11.2.14.11.5.1.41.2.1.6,HP-ICF-GPPC-MIB::hpicfGppcAcIngressVlanMap2k,OCTET,read-create,,current,,A string of octets containing one bit per VLAN for VLANS with vlan index values of 1024 through 2047. The first octet corresponds to VLANs with vlan index values of 1024 through 1031, the second octet to VLANs 1032 through 1039, etc. The most significant bit of each octet corresponds to the lowest vlan index value in that octet. For each VLAN that this policy should apply to at ingress, the corresponding bit is set to '1'.
.1.3.6.1.4.1.11.2.14.11.5.1.41.2.1.7,HP-ICF-GPPC-MIB::hpicfGppcAcIngressVlanMap3k,OCTET,read-create,,current,,A string of octets containing one bit per VLAN for VLANS with vlan index values of 2048 through 3071. The first octet corresponds to VLANs with vlan index values of 2048 through 2055, the second octet to VLANs 2056 through 2063, etc. The most significant bit of each octet corresponds to the lowest vlan index value in that octet. For each VLAN that this policy should apply to at ingress, the corresponding bit is set to '1'.
.1.3.6.1.4.1.11.2.14.11.5.1.41.2.1.8,HP-ICF-GPPC-MIB::hpicfGppcAcIngressVlanMap4k,OCTET,read-create,,current,,A string of octets containing one bit per VLAN for VLANS with vlan index values of 3072 through 4095. The first octet corresponds to VLANs with vlan index values of 3072 through 3079, the second octet to VLANs 3080 through 3087, etc. The most significant bit of each octet corresponds to the lowest vlan index value in that octet. For each VLAN that this policy should apply to at ingress, the corresponding bit is set to '1'.
.1.3.6.1.4.1.11.2.14.11.5.1.41.2.1.9,HP-ICF-GPPC-MIB::hpicfGppcAcEgressIfList,OCTET,read-create,,current,,List of interfaces to which this policy applies at egress.
.1.3.6.1.4.1.11.2.14.11.5.1.41.2.1.10,HP-ICF-GPPC-MIB::hpicfGppcAcEgressVlanMap1k,OCTET,read-create,,current,,A string of octets containing one bit per VLAN for VLANS with vlan index values of 0 through 1023. The first octet corresponds to VLANs with vlan index values of 0 through 7, the second octet to VLANs 8 through 15, etc. The most significant bit of each octet corresponds to the lowest vlan index value in that octet. For each VLAN that this policy should apply to at egress, the corresponding bit is set to '1'.
.1.3.6.1.4.1.11.2.14.11.5.1.41.2.1.11,HP-ICF-GPPC-MIB::hpicfGppcAcEgressVlanMap2k,OCTET,read-create,,current,,A string of octets containing one bit per VLAN for VLANS with vlan index values of 1024 through 2047. The first octet corresponds to VLANs with vlan index values of 1024 through 1031, the second octet to VLANs 1032 through 1039, etc. The most significant bit of each octet corresponds to the lowest vlan index value in that octet. For each VLAN that this policy should apply to at egress, the corresponding bit is set to '1'.
.1.3.6.1.4.1.11.2.14.11.5.1.41.2.1.12,HP-ICF-GPPC-MIB::hpicfGppcAcEgressVlanMap3k,OCTET,read-create,,current,,A string of octets containing one bit per VLAN for VLANS with vlan index values of 2048 through 3071. The first octet corresponds to VLANs with vlan index values of 2048 through 2055, the second octet to VLANs 2056 through 2063, etc. The most significant bit of each octet corresponds to the lowest vlan index value in that octet. For each VLAN that this policy should apply to at egress, the corresponding bit is set to '1'.
.1.3.6.1.4.1.11.2.14.11.5.1.41.2.1.13,HP-ICF-GPPC-MIB::hpicfGppcAcEgressVlanMap4k,OCTET,read-create,,current,,A string of octets containing one bit per VLAN for VLANS with vlan index values of 3072 through 4095. The first octet corresponds to VLANs with vlan index values of 3072 through 3079, the second octet to VLANs 3080 through 3087, etc. The most significant bit of each octet corresponds to the lowest vlan index value in that octet. For each VLAN that this policy should apply to at egress, the corresponding bit is set to '1'.
.1.3.6.1.4.1.11.2.14.11.5.1.41.2.1.14,HP-ICF-GPPC-MIB::hpicfGppcAcExpPolicy,INTEGER,read-create,,current,permanent(1):slot-down(2):app-down(3),Expiration policy. This indicates whether a policy should expire automatically. 'permanent' means a policy should never expire automatically.
.1.3.6.1.4.1.11.2.14.11.5.1.41.2.1.15,HP-ICF-GPPC-MIB::hpicfGppcAcExpString,OCTET,read-create,,current,,Expiration string. This is used in conjuntion with hpicfGppcAcExpPolicy to indicate when a policy should expire automatically. The value stored in this object is interpreted differently for different expiration policies. When the expiration policy is 'permanent', this value is ignored.
.1.3.6.1.4.1.11.2.14.11.5.1.41.2.1.16,HP-ICF-GPPC-MIB::hpicfGppcAcLastErrorCode,INTEGER,read-only,,current,no-error(0):gppc-generic-error(1):gppc-length-error(2):gppc-name-error(3):gppc-parameter-error(4):gppc-not-implemented(5):gppc-malloc-error(6):gppc-too-many-apps(7):gppc-too-many-policies(8):gppc-already-reserved(9):gppc-entry-not-found(10):gppc-entry-exists(11):gppc-platform-error(12):gppc-app-using-policy(13):gppc-invalid-policy-type(14):gppc-not-reserved(15):gppc-no-policy(16):gppc-policy-not-active(17):gppc-policy-has-rules(18):gppc-rule-exists(19):gppc-mac-mirror-mac-exists(30):gppc-mac-mirror-dir-both-conflict(31):gppc-mac-mirror-dir-src-conflict(32):gppc-mac-mirror-dir-dst-conflict(33):gppc-mac-mirror-invalid-session(34):gppc-mac-mirror-invalid-direction(35):gppc-mac-mirror-no-entry(36):gppc-mac-mirror-convert-error(37):gppc-mac-mirror-table-full(38):gppc-cfg-generic-error(50):gppc-cfg-entry-not-found(51):gppc-cfg-set-error(52):gppc-cfg-get-error(53):gppc-cfg-no-record(54):gppc-cfg-add-record-error(55):gppc-cfg-invalid(56):gppc-cfg-malloc-error(57):gppcTrmodeErr(70):gppcTrmodeInvalidZoneNumber(71):gppcTrmodeOperationNotSupported(72):gppcTrmodeZoneNameTooLong(73):gppcTrmodeZoneNameNotFound(74):gppcTrmodeZoneNameAlreadyExists(75):gppcTrmodeTooManyZoneNames(76):gppcTrmodeUnknownPort(77):gppcTrmodeCannotDeleteDefaultZone(78):gppcTrmodeCannotDeleteZoneWithRules(79):gppcTrmodeInvalidFilterNumber(80):gppcTrmodeCannotFilterTrafficWithinZone(81):gppcTrmodeInvalidAction(82):gppcTrmodeUnicastInterceptMacaddrRequired(83):gppcTrmodeCannotAllocateMirrorSession(84):gppcTrmodeCannotAllocateClassifierResources(85),Error code of the last error that occurred. A non-zero value indicates that the last operation performed by this instance of the application on the named policy did not succeed. A detailed description of the error is available in hpicfGppcAcLastErrorString.
.1.3.6.1.4.1.11.2.14.11.5.1.41.2.1.17,HP-ICF-GPPC-MIB::hpicfGppcAcLastErrorString,OCTET,read-only,,current,,Description of the last error that occurred. This is a printable ASCII string that describes the error in some detail.
.1.3.6.1.4.1.11.2.14.11.5.1.41.2.1.18,HP-ICF-GPPC-MIB::hpicfGppcAcRowAdminStatus,INTEGER,read-create,,current,disabled(1):enabled(2),Administrative status of this row. The named policy in this row is applied to the interfaces and/or VLANs by this instance of the application only when the administrative status is enabled. This is the main on/off switch for the row. The row status must be active for this switch to have an effect.
.1.3.6.1.4.1.11.2.14.11.5.1.41.2.1.19,HP-ICF-GPPC-MIB::hpicfGppcAcRowStatus,INTEGER,read-create,,current,active(1):notInService(2):notReady(3):createAndGo(4):createAndWait(5):destroy(6),Status of this row. Row status must be active, and the admin status (see hpicfGppcAcRowAdminStatus) must be enabled for this row to be activated.
.1.3.6.1.4.1.11.2.14.11.5.1.41.3,HP-ICF-GPPC-MIB::hpicfGppcNamedPolicyTable,,not-accessible,,current,,The named policy table. This table lists the name and type of all policies that are applied via GPPC.
.1.3.6.1.4.1.11.2.14.11.5.1.41.3.1,HP-ICF-GPPC-MIB::hpicfGppcNamedPolicyEntry,,not-accessible,hpicfGppcNpPolicyName,current,,An entry in the named policy table.
.1.3.6.1.4.1.11.2.14.11.5.1.41.3.1.1,HP-ICF-GPPC-MIB::hpicfGppcNpPolicyName,OCTET,not-accessible,,current,,Name of the policy. The name of a policy is its unique identification. It is a printable string in ASCII characters. It can be up to 64 characters in length
.1.3.6.1.4.1.11.2.14.11.5.1.41.3.1.2,HP-ICF-GPPC-MIB::hpicfGppcNpPolicyType,INTEGER,read-create,,current,mac-based-mirroring(1):zone-intercept(2),Type of the policy. A policy type of 'mac-based-mirroring' indicates that the policy is used to mirror traffic based on the MAC address of the source or destination.
.1.3.6.1.4.1.11.2.14.11.5.1.41.3.1.3,HP-ICF-GPPC-MIB::hpicfGppcNpRowStatus,INTEGER,read-create,,current,active(1):notInService(2):notReady(3):createAndGo(4):createAndWait(5):destroy(6),Status of this row. The named policy must be active before rules can be added to it or removed from it. A newly created policy will remain in notReady state until it is given a valid policy type (see hpicfGppcNpPolicyType). A row in the named policy table can not be deleted if the named policy is referenced by a row in the application control table. The application control entries that refer to this row must be deleted before this row can be deleted.
.1.3.6.1.4.1.11.2.14.11.5.1.41.4,HP-ICF-GPPC-MIB::hpicfGppcPolicyRulesTable,,not-accessible,,current,,The policy rules table. A policy can consist of multiple rules. All of the rules of a policy are listed in this table. Each rule consists of a string and a numeric identifier - the rule id.
.1.3.6.1.4.1.11.2.14.11.5.1.41.4.1,HP-ICF-GPPC-MIB::hpicfGppcPolicyRulesEntry,,not-accessible,hpicfGppcNpPolicyName:hpicfGppcPrRuleId,current,,An entry in the policy rules table.
.1.3.6.1.4.1.11.2.14.11.5.1.41.4.1.1,HP-ICF-GPPC-MIB::hpicfGppcPrRuleId,Integer32,not-accessible,,current,,Numeric identifier of the rule. The rules in a policy are processed sequentially in increasing order of their rule ids. These numeric ids are generated by the application that creates the policy. Rules within a policy have unique rule ids.
.1.3.6.1.4.1.11.2.14.11.5.1.41.4.1.2,HP-ICF-GPPC-MIB::hpicfGppcPrPolicyRule,OCTET,read-create,,current,,Rule string. This is a string that represents one rule in the policy. A policy can consist of one or many rules.
.1.3.6.1.4.1.11.2.14.11.5.1.41.4.1.3,HP-ICF-GPPC-MIB::hpicfGppcPrRowStatus,INTEGER,read-create,,current,active(1):notInService(2):notReady(3):createAndGo(4):createAndWait(5):destroy(6),Status of this row. A rule must have an active row status in order to take effect. Only active rules within the named policy are applied when an application applies the policy. It is possible to use this row status as an on/off switch for enabling or disabling selected rules within a policy. A newly created rule will remain in notReady state until it is given a valid rule string (see hpicfGppcPrPolicyRule).
.1.3.6.1.4.1.11.2.14.11.5.1.42,HP-ICF-OID::hpicfAutorun,,,,,,
.1.3.6.1.4.1.11.2.14.11.5.1.42.1,HP-ICF-AUTORUN::hpicfAutorunConfig,,,,,,
.1.3.6.1.4.1.11.2.14.11.5.1.42.1.1,HP-ICF-AUTORUN::hpicfUsbAutorunEnable,INTEGER,read-write,,current,true(1):false(2),This MIB object identifies the admin status of the USB Autorun feature true(1) - Autorun Enabled. false(2) - Autorun Disabled.
.1.3.6.1.4.1.11.2.14.11.5.1.42.1.2,HP-ICF-AUTORUN::hpicfUsbAutorunSecureMode,INTEGER,read-write,,current,true(1):false(2),This MIB object identifies the admin status of the  secure-mode for the USB Autorun feature true(1) - secure-mode for autorun Enabled. false(2) - secure-mode for autorun Disabled.
.1.3.6.1.4.1.11.2.14.11.5.1.42.1.3,HP-ICF-AUTORUN::hpicfUsbAutorunEncryptionKey,OCTET,read-write,,current,,This MIB object identifies the configured encryption  key string for USB Autorun feature
.1.3.6.1.4.1.11.2.14.11.5.1.42.2,HP-ICF-AUTORUN::hpicfAutorunConformance,,,,,,
.1.3.6.1.4.1.11.2.14.11.5.1.42.2.1,HP-ICF-AUTORUN::hpicfAutorunCompliances,,,,,,
.1.3.6.1.4.1.11.2.14.11.5.1.42.2.1.1,HP-ICF-AUTORUN::hpicfAutorunCompliance,,,,,,Compliance statement for HP ICP Autorun  configuration
.1.3.6.1.4.1.11.2.14.11.5.1.42.2.2,HP-ICF-AUTORUN::hpicfAutorunGroups,,,,,,
.1.3.6.1.4.1.11.2.14.11.5.1.42.2.2.1,HP-ICF-AUTORUN::hpicfAutorunConfigGroup,,,,,, 
.1.3.6.1.4.1.11.2.14.11.5.1.44,HP-ICF-OSPFV3-MIB::hpicfOspfv3MIB,,,,,,The MIB module contains HP proprietary extensions to the OSPFV3-MIB module.
.1.3.6.1.4.1.11.2.14.11.5.1.44.1,HP-ICF-OSPFV3-MIB::hpicfOspfv3Objects,,,,,,
.1.3.6.1.4.1.11.2.14.11.5.1.44.1.1,HP-ICF-OSPFV3-MIB::hpicfOspfv3GeneralGroup,,,,,,
.1.3.6.1.4.1.11.2.14.11.5.1.44.1.1.1,HP-ICF-OSPFV3-MIB::hpicfOspfv3DefaultImportMetric,Integer32,read-write,,current,,The default metric used for advertising external routes imported into OSPF by this router.
.1.3.6.1.4.1.11.2.14.11.5.1.44.1.1.2,HP-ICF-OSPFV3-MIB::hpicfOspfv3DefaultImportMetricType,INTEGER,read-write,,current,externalType1(1):externalType2(2),The default metric type used for advertising external routes imported into OSPF by this router.
.1.3.6.1.4.1.11.2.14.11.5.1.44.1.1.3,HP-ICF-OSPFV3-MIB::hpicfOspfv3IntraAreaDistance,Integer32,read-write,,current,,The default administrative distance to associate with intra-area routes learned by OSPF. Routes with lower distances are preferred. By default, OSPF routes have an administrative distance of 110. Note that the administrative distance settings for OSPF do not affect the choice of routes within OSPF. OSPF will still prefer intra-area routes over inter-area or AS-external routes even if hpicfOspfv3InterAreaDistance or hpicfOspfv3ExternalDistance is lower than hpicfOspfv3IntraAreaDistance. The appropriate  administrative distance value is applied to the route that OSPF selects as its best route to a destination and is used to decide whether OSPF's route is preferred over a route from some other source.
.1.3.6.1.4.1.11.2.14.11.5.1.44.1.1.4,HP-ICF-OSPFV3-MIB::hpicfOspfv3InterAreaDistance,Integer32,read-write,,current,,The default administrative distance to associate with inter-area routes learned by OSPF. Routes with lower distances are preferred. By default, OSPF routes have an administrative distance of 110. Note that the administrative distance settings for OSPF do not affect the choice of routes within OSPF. OSPF will still prefer intra-area routes over inter-area routes, even if hpicfOspfv3InterAreaDistance is lower than hpicfOspfv3IntraAreaDistance. It will also still prefer inter-area routes over AS-external routes even if hpicfOspfv3ExternalDistance is lower than hpicfOspfv3InterAreaDistance. The appropriate  administrative distance value is applied to the route that OSPF selects as its best route to a destination and is used to decide whether OSPF's route is preferred over a route from some other source.
.1.3.6.1.4.1.11.2.14.11.5.1.44.1.1.5,HP-ICF-OSPFV3-MIB::hpicfOspfv3ExternalDistance,Integer32,read-write,,current,,The default administrative distance to associate with AS-external routes learned by OSPF. Routes with lower distances are preferred. By default, OSPF routes have an administrative distance of 110. Note that the administrative distance settings for OSPF do not affect the choice of routes within OSPF. OSPF will still prefer intra-area routes and inter-area routes over AS-external routes even if hpicfOspfv3ExternalDistance is lower than the hpicfOspfv3IntraAreaDistance or hpicfOspfv3InterAreaDistance. The appropriate  administrative distance value is applied to the route that OSPF selects as its best route to a destination and is used to decide whether OSPF's route is preferred over a route from some other source.
.1.3.6.1.4.1.11.2.14.11.5.1.44.1.2,HP-ICF-OSPFV3-MIB::hpicfOspfv3AsLsdbTable,,not-accessible,,current,,The OSPFv3 Process's AS-Scope Link State Database  (LSDB). The LSDB contains the AS-Scope Link State  Advertisements from throughout the areas that the  device is attached to.
.1.3.6.1.4.1.11.2.14.11.5.1.44.1.2.1,HP-ICF-OSPFV3-MIB::hpicfOspfv3AsLsdbEntry,,not-accessible,,current,,A single AS-Scope Link State Advertisement.
.1.3.6.1.4.1.11.2.14.11.5.1.44.1.2.1.1,HP-ICF-OSPFV3-MIB::hpicfOspfv3AsLsdbEFTFlags,BITS,read-only,,current,bitE(0):bitF(1):bitT(2),A 32-bit integer Representing the E,F and T bit flags
.1.3.6.1.4.1.11.2.14.11.5.1.44.1.2.1.2,HP-ICF-OSPFV3-MIB::hpicfOspfv3AsLsdbMetric,Integer32,read-only,,current,,The cost associated with this route.
.1.3.6.1.4.1.11.2.14.11.5.1.44.1.2.1.3,HP-ICF-OSPFV3-MIB::hpicfOspfv3AsLsdbPrefixLength,Unsigned32,read-only,,current,,The Prefix Length of the Address Prefix.
.1.3.6.1.4.1.11.2.14.11.5.1.44.1.2.1.4,HP-ICF-OSPFV3-MIB::hpicfOspfv3AsLsdbPrefixOptions,Unsigned32,read-only,,current,,The Prefix Options associated with the Address Prefix.
.1.3.6.1.4.1.11.2.14.11.5.1.44.1.2.1.5,HP-ICF-OSPFV3-MIB::hpicfOspfv3AsLsdbRefLsType,Unsigned32,read-only,,current,,If non-zero value this refers to another LSA in Link State Database further identified by the Reference Link State ID field
.1.3.6.1.4.1.11.2.14.11.5.1.44.1.2.1.6,HP-ICF-OSPFV3-MIB::hpicfOspfv3AsLsdbAddrPrefix,OCTET,read-only,,current,,The advertised 16-byte Address Prefix.
.1.3.6.1.4.1.11.2.14.11.5.1.44.1.2.1.7,HP-ICF-OSPFV3-MIB::hpicfOspfv3AsLsdbFwdingAddress,OCTET,read-only,,current,,If included, Data traffic for the advertised destination will be forwarded to this address.
.1.3.6.1.4.1.11.2.14.11.5.1.44.1.2.1.8,HP-ICF-OSPFV3-MIB::hpicfOspfv3AsLsdbExtRouteTags,Unsigned32,read-only,,current,,The 32-bit Router Tags for the advertised Route.
.1.3.6.1.4.1.11.2.14.11.5.1.44.1.2.1.9,HP-ICF-OSPFV3-MIB::hpicfOspfv3AsLsdbRefLsId,Unsigned32,read-only,,current,,The 32-bit LSID of the referenced LSA entry.
.1.3.6.1.4.1.11.2.14.11.5.1.44.1.3,HP-ICF-OSPFV3-MIB::hpicfOspfv3AreaLsdbTable,,not-accessible,,current,,The OSPFv3 Process's Area-Scope LSDB.  The LSDB contains the Area-Scope Link State  Advertisements from throughout the area that the  device is attached to.
.1.3.6.1.4.1.11.2.14.11.5.1.44.1.3.1,HP-ICF-OSPFV3-MIB::hpicfOspfv3AreaLsdbEntry,,not-accessible,,current,,A single Area-Scope Link State Advertisement.
.1.3.6.1.4.1.11.2.14.11.5.1.44.1.3.1.1,HP-ICF-OSPFV3-MIB::hpicfOspfv3AreaLsdbRtrCapBits,BITS,read-only,,current,bitB(0):bitE(1):bitV(2):bitW(3):bitNt(4),This field is valid if the LSA is a Router LSA. It uniquely identifies the router type of the router in the Area.
.1.3.6.1.4.1.11.2.14.11.5.1.44.1.3.1.2,HP-ICF-OSPFV3-MIB::hpicfOspfv3AreaLsdbOptions,Unsigned32,read-only,,current,,The Options field enables OSPF routers to support (or not support) optional capabilities, and to communicate their capability level to other OSPF routers. This field is valid if the LSA is a Router LSA or a Network LSA, or an Inter-Area-Router LSA.
.1.3.6.1.4.1.11.2.14.11.5.1.44.1.3.1.3,HP-ICF-OSPFV3-MIB::hpicfOspfv3AreaLsdbMetric,Integer32,read-only,,current,,This field is valid if the LSA is a Router LSA, a Inter-Area_prefix LSA or a NSSA LSA. This field indicates the cost involved in using the interface or route.
.1.3.6.1.4.1.11.2.14.11.5.1.44.1.3.1.4,HP-ICF-OSPFV3-MIB::hpicfOspfv3AreaLsdbPrefixLength,Unsigned32,read-only,,current,,The Prefix Length of the Address Prefix.
.1.3.6.1.4.1.11.2.14.11.5.1.44.1.3.1.5,HP-ICF-OSPFV3-MIB::hpicfOspfv3AreaLsdbPrefixOptions,Unsigned32,read-only,,current,,The Prefix Options associated with the Address Prefix.
.1.3.6.1.4.1.11.2.14.11.5.1.44.1.3.1.6,HP-ICF-OSPFV3-MIB::hpicfOspfv3AreaLsdbAddrPrefix,OCTET,read-only,,current,,The advertised 16-byte Address Prefix.
.1.3.6.1.4.1.11.2.14.11.5.1.44.1.3.1.7,HP-ICF-OSPFV3-MIB::hpicfOspfv3AreaLsdbDstRtrId,Unsigned32,read-only,,current,,The Router ID of the router being described by the LSA. This field is valid if the LSA is a Inter-Area-Router LSA.
.1.3.6.1.4.1.11.2.14.11.5.1.44.1.3.1.8,HP-ICF-OSPFV3-MIB::hpicfOspfv3AreaLsdbNumPrefixes,Unsigned32,read-only,,current,,This field is valid if the LSA is a Inter-Area-Prefix LSAs and indicates the number of prefixes in the LSA.
.1.3.6.1.4.1.11.2.14.11.5.1.44.1.3.1.9,HP-ICF-OSPFV3-MIB::hpicfOspfv3AreaLsdbRefLsType,Unsigned32,read-only,,current,,This field is valid if the LSA is a Inter-Area-Prefix LSA or a NSSA LSA. If non-zero, an LSA with this LS type is to be associated with this LSA.
.1.3.6.1.4.1.11.2.14.11.5.1.44.1.3.1.10,HP-ICF-OSPFV3-MIB::hpicfOspfv3AreaLsdbRefLsId,Unsigned32,read-only,,current,,This field is valid if the LSA is a Inter-Area-Prefix LSA or a NSSA LSA. This field is included only if the Reference LS Type field is set and indentifies the LSA with this Link State ID.
.1.3.6.1.4.1.11.2.14.11.5.1.44.1.3.1.11,HP-ICF-OSPFV3-MIB::hpicfOspfv3AreaLsdbRefAdvRtrId,Unsigned32,read-only,,current,,This field is valid if the LSA is a Inter-Area-Prefix LSA or a NSSA LSA. This field is included only if the Reference LS Type field is set and indentifies the LSA having this Router ID as the advertising Router ID.
.1.3.6.1.4.1.11.2.14.11.5.1.44.1.3.1.12,HP-ICF-OSPFV3-MIB::hpicfOspfv3AreaLsdbEFTFlags,BITS,read-only,,current,bitE(0):bitF(1):bitT(2),This field is valid if the LSA is a NSSA LSA. This field represents the E,F and T bit flags
.1.3.6.1.4.1.11.2.14.11.5.1.44.1.3.1.13,HP-ICF-OSPFV3-MIB::hpicfOspfv3AreaLsdbFwdingAddress,OCTET,read-only,,current,,This field is valid if the LSA is a NSSA LSA. This field is present only if the 'F' Bit is set in the EFT flags field and if included, the data traffic for the advertised destination will be forwarded to this address.
.1.3.6.1.4.1.11.2.14.11.5.1.44.1.3.1.14,HP-ICF-OSPFV3-MIB::hpicfOspfv3AreaLsdbExtRouteTags,Unsigned32,read-only,,current,,This field is valid if the LSA is a NSSA LSA. This field is present only if the 'T' Bit is set in the EFT flags field. A 32-bit field which may be used to communicate additional information between AS boundary routers.
.1.3.6.1.4.1.11.2.14.11.5.1.44.1.4,HP-ICF-OSPFV3-MIB::hpicfOspfv3LinkLsdbTable,,not-accessible,,current,,The OSPFv3 Process's Link-Scope LSDB for non-virtual  interfaces. The LSDB contains the Link-Scope Link  State Advertisements from the interfaces that the  device is attached to.
.1.3.6.1.4.1.11.2.14.11.5.1.44.1.4.1,HP-ICF-OSPFV3-MIB::hpicfOspfv3LinkLsdbEntry,,not-accessible,,current,,A single Link-Scope Link State Advertisement.
.1.3.6.1.4.1.11.2.14.11.5.1.44.1.4.1.1,HP-ICF-OSPFV3-MIB::hpicfOspfv3LinkLsdbRtrPriority,Unsigned32,read-only,,current,,This field is the OSPF priority set for this router
.1.3.6.1.4.1.11.2.14.11.5.1.44.1.4.1.2,HP-ICF-OSPFV3-MIB::hpicfOspfv3LinkLsdbOptions,Unsigned32,read-only,,current,,The Options field enables OSPF routers to support (or not support) optional capabilities, and to communicate their capability level to other OSPF routers.
.1.3.6.1.4.1.11.2.14.11.5.1.44.1.4.1.3,HP-ICF-OSPFV3-MIB::hpicfOspfv3LinkLsdbLocalAddress,OCTET,read-only,,current,,The advertising router's local link IPv6 address
.1.3.6.1.4.1.11.2.14.11.5.1.44.1.4.1.4,HP-ICF-OSPFV3-MIB::hpicfOspfv3LinkLsdbNumPrefixes,Unsigned32,read-only,,current,,The number of other links on the advertising router
.1.3.6.1.4.1.11.2.14.11.5.1.44.1.5,HP-ICF-OSPFV3-MIB::hpicfOspfv3IfTable,,not-accessible,,current,,The OSPFv3 Interface Table describes the  interfaces from the viewpoint of OSPFv3.
.1.3.6.1.4.1.11.2.14.11.5.1.44.1.5.1,HP-ICF-OSPFV3-MIB::hpicfOspfv3IfEntry,,not-accessible,,current,,The OSPFv3 Interface Entry describes one  interface from the viewpoint of OSPFv3.  The information in this table is persistent  and when written the entity SHOULD save the  change to non-volatile storage.
.1.3.6.1.4.1.11.2.14.11.5.1.44.1.5.1.1,HP-ICF-OSPFV3-MIB::hpicfOspfv3IfPassive,INTEGER,read-create,,current,true(1):false(2),The passive state configuration of the OSPF interface.  In the passive mode no OSPF protocol messages are exchanged on this interface.  true (1) - The interface is configured to work in Passive mode false (2) - The interface is configured to work in normal mode. This is the default configuration.  Changing the value will cause OSPF to reset on this interface and make necessary adjustments to the link state database.  All other operations are not defined and will not affect the state of the protocol.
.1.3.6.1.4.1.11.2.14.11.5.1.44.1.5.1.2,HP-ICF-OSPFV3-MIB::hpicfOspfv3IfNbrCount,Unsigned32,read-only,,current,,This object specifies the number of OSPFv3 neighbors  present in this interface. This counter should be  incremented when a new neighbor is added in the network in  which this interface is present.  It should be decremented when a neighbor is disconnected.
.1.3.6.1.4.1.11.2.14.11.5.1.44.1.6,HP-ICF-OSPFV3-MIB::hpicfOspfv3NbrTable,,not-accessible,,current,,A table describing all neighbors in the  locality of the OSPFv3 router.
.1.3.6.1.4.1.11.2.14.11.5.1.44.1.6.1,HP-ICF-OSPFV3-MIB::hpicfOspfv3NbrEntry,,not-accessible,,current,,The information regarding a single neighbor.
.1.3.6.1.4.1.11.2.14.11.5.1.44.1.6.1.1,HP-ICF-OSPFV3-MIB::hpicfOspfv3NbrUpTime,Unsigned32,read-only,,current,,This object specifies the time duration in  seconds for which the adjacency with a  particular neighbor is active.  This should be a monotonically increasing timer  for the duration till the adjacency is active.  This counter should be reset at losing and re-establishing an adjacency
.1.3.6.1.4.1.11.2.14.11.5.1.44.1.6.1.2,HP-ICF-OSPFV3-MIB::hpicfOspfv3NbrTimeToExpiry,Unsigned32,read-only,,current,,This object specifies the time remaining for the dead timer for the particular neighbor to expire. This counter thus specifies the time in seconds  left for an adjacency to be brought down in case no Hello packet is received during that interval.
.1.3.6.1.4.1.11.2.14.11.5.1.44.1.7,HP-ICF-OSPFV3-MIB::hpicfOspfv3IfStatsTable,,not-accessible,,current,,Table that contains OSPFv3 Interface traffic specific information.
.1.3.6.1.4.1.11.2.14.11.5.1.44.1.7.1,HP-ICF-OSPFV3-MIB::hpicfOspfv3IfStatsEntry,,not-accessible,ospfv3IfIndex:ospfv3IfInstId,current,,A list of statistics counters maintained for an OSPFv3  interface.
.1.3.6.1.4.1.11.2.14.11.5.1.44.1.7.1.1,HP-ICF-OSPFV3-MIB::hpicfOspfv3IfSentHelloPkt,Counter32,read-only,,current,,The number of OSPFv3 Hello packets sent on the interface. This number is incremented each time an OSPFv3 Hello packet is sent out of an  OSPFv3 enabled interface. Discontinuities in the value of this counter can occur at re-initialization of the management system. The counters can be cleared for any  interface using 'clear ipv6 ospf3 statistics' command
.1.3.6.1.4.1.11.2.14.11.5.1.44.1.7.1.2,HP-ICF-OSPFV3-MIB::hpicfOspfv3IfSentDDPkt,Counter32,read-only,,current,,The number of Database Description packets sent on the interface. This number is incremented each  time an OSPFv3 DD packet is sent out of an OSPFv3 enabled interface. Discontinuities in the value of this counter can occur at re-initialization of the management system. The counters can be cleared for any  interface using 'clear ipv6 ospf3 statistics' command
.1.3.6.1.4.1.11.2.14.11.5.1.44.1.7.1.3,HP-ICF-OSPFV3-MIB::hpicfOspfv3IfSentLSRPkt,Counter32,read-only,,current,,The number of Link State Request packets sent on the interface. This number is incremented each  time OSPFv3 LSR packet is sent out of an OSPFv3 enabled interface. Discontinuities in the value of this counter can occur at re-initialization of the management system. The counters can be cleared for any  interface using 'clear ipv6 ospf3 statistics' command
.1.3.6.1.4.1.11.2.14.11.5.1.44.1.7.1.4,HP-ICF-OSPFV3-MIB::hpicfOspfv3IfSentLSUPkt,Counter32,read-only,,current,,The number of Link State Update packets sent on  the interface. This number is incremented each  time OSPFv3 LSU packet is sent out of an OSPFv3 enabled interface. Discontinuities in the value of this counter can occur at re-initialization of the management system. The counters can be cleared for any interface using 'clear ipv6 ospf3 statistics' command
.1.3.6.1.4.1.11.2.14.11.5.1.44.1.7.1.5,HP-ICF-OSPFV3-MIB::hpicfOspfv3IfSentLSAPkt,Counter32,read-only,,current,,The number of Link State Acknowledgement packet  sent on the interface. This number is  incremented each time OSPFv3 LSA packet is sent out of an OSPFv3 enabled interface. Discontinuities in the value of this counter can occur at re-initialization of the management system. The counters can be cleared for any  interface using 'clear ipv6 ospf3 statistics'  command
.1.3.6.1.4.1.11.2.14.11.5.1.44.1.7.1.6,HP-ICF-OSPFV3-MIB::hpicfOspfv3IfRcvdHelloPkt,Counter32,read-only,,current,,The number of Hello packets received on the  interface. This number is incremented each time a hello packet is received on OSPFv3 enabled  interface. Discontinuities in the value of this counter can occur at re-initialization of the management system. The counters can be cleared for any  interface using 'clear ipv6 ospf3 statistics' command
.1.3.6.1.4.1.11.2.14.11.5.1.44.1.7.1.7,HP-ICF-OSPFV3-MIB::hpicfOspfv3IfRcvdDDPkt,Counter32,read-only,,current,,The number of Database Description packets  received on the interface. This number is  incremented each time a OSPFv3 DD packet is  received on OSPFv3 enabled interface. Discontinuities in the value of this counter can occur at re-initialization of the management system. The counters can be cleared for any interface using 'clear ipv6 ospf3 statistics' command
.1.3.6.1.4.1.11.2.14.11.5.1.44.1.7.1.8,HP-ICF-OSPFV3-MIB::hpicfOspfv3IfRcvdLSRPkt,Counter32,read-only,,current,,The number of Link State Request packets received on the interface. This number is incremented each time a OSPFv3 LSR packet is received on OSPFv3 enabled interface. Discontinuities in the value of this counter can occur at re-initialization of the management system. The counters can be cleared for any  interface using 'clear ipv6 ospf3 statistics' command
.1.3.6.1.4.1.11.2.14.11.5.1.44.1.7.1.9,HP-ICF-OSPFV3-MIB::hpicfOspfv3IfRcvdLSUPkt,Counter32,read-only,,current,,The number of Link State Update packets received on the interface. This number is incremented each time an OSPFv3 LSU packet is received on OSPFv3  enabled interface. Discontinuities in the value of this counter can occur at re-initialization of the management system. The counters can be cleared for any  interface using 'clear ipv6 ospf3 statistics' command
.1.3.6.1.4.1.11.2.14.11.5.1.44.1.7.1.10,HP-ICF-OSPFV3-MIB::hpicfOspfv3IfRcvdLSAPkt,Counter32,read-only,,current,,The number of Link State Acknowledgement packets received on the interface.  This number is incremented each time a OSPF LSA packet is received on OSPFv3 enabled interface. Discontinuities in the value of this counter can occur at re-initialization of the management system. The counters can be cleared for any  interface using 'clear ipv6 ospf3 statistics' command
.1.3.6.1.4.1.11.2.14.11.5.1.44.1.8,HP-ICF-OSPFV3-MIB::hpicfOspfv3IfErrorTable,,not-accessible,,current,,Table that contains OSPFv3 Interface traffic specific error information.
.1.3.6.1.4.1.11.2.14.11.5.1.44.1.8.1,HP-ICF-OSPFV3-MIB::hpicfOspfv3IfErrorEntry,,not-accessible,ospfv3IfIndex:ospfv3IfInstId:hpicfOspfv3IfErrorType,current,,A list of error counters maintained for an OSPFv3 interface.
.1.3.6.1.4.1.11.2.14.11.5.1.44.1.8.1.1,HP-ICF-OSPFV3-MIB::hpicfOspfv3IfErrorType,Integer32,not-accessible,,current,,This refers to the type of errors in the OSPFv3 packet received on an OSPFv3 enabled interface.
.1.3.6.1.4.1.11.2.14.11.5.1.44.1.8.1.2,HP-ICF-OSPFV3-MIB::hpicfOspfv3IfErrorCount,Counter32,read-only,,current,,This refers to the number of erroneous packets received on an OSPFv3 interface for each error type. Discontinuities in the value of this counter can occur at re-initialization of the management system. The counters can be cleared for any  interface using 'clear ipv6 ospf3 statistics' command.
.1.3.6.1.4.1.11.2.14.11.5.1.44.1.9,HP-ICF-OSPFV3-MIB::hpicfOspfv3IfClearStatsTable,,not-accessible,,current,,A list used to clear statistics information maintained for an OSPFv3 interface.
.1.3.6.1.4.1.11.2.14.11.5.1.44.1.9.1,HP-ICF-OSPFV3-MIB::hpicfOspfv3IfClearStatsEntry,,not-accessible,ospfv3IfIndex:ospfv3IfInstId,current,,A list used to clear statistics information maintained for an OSPFv3 interface.
.1.3.6.1.4.1.11.2.14.11.5.1.44.1.9.1.1,HP-ICF-OSPFV3-MIB::hpicfOspfv3ClearCounters,INTEGER,read-write,,current,true(1):false(2),When this variable is set to true for a given vlan interface, correspondiing interface counters will be cleared. Read of this will always be false.
.1.3.6.1.4.1.11.2.14.11.5.1.44.1.10,HP-ICF-OSPFV3-MIB::hpicfOspfv3SpfTable,,not-accessible,,current,,Table that contains OSPFv3 SPF execution details.
.1.3.6.1.4.1.11.2.14.11.5.1.44.1.10.1,HP-ICF-OSPFV3-MIB::hpicfOspfv3SpfEntry,,not-accessible,hpicfOspfv3SpfIndex,current,,A list of OSPFv3 SPF algorithm execution details.
.1.3.6.1.4.1.11.2.14.11.5.1.44.1.10.1.1,HP-ICF-OSPFV3-MIB::hpicfOspfv3SpfIndex,Unsigned32,not-accessible,,current,,The index in spf table. This can range from 1 to 100 as only last hundred SPF run's reasons will be saved.
.1.3.6.1.4.1.11.2.14.11.5.1.44.1.10.1.2,HP-ICF-OSPFV3-MIB::hpicfOspfv3SpfReason,Unsigned32,read-only,,current,,The hpicfOspfv3SpfReason refers to the reasons for scheduling an SPF run. The Reasons could be OSPFv3  initialization, adding/deleting interface or link state  update received.
.1.3.6.1.4.1.11.2.14.11.5.1.44.1.11,HP-ICF-OSPFV3-MIB::hpicfOspfv3LogTable,,not-accessible,,current,,A table containing the configuration parameters for OSPFv3 event logging.
.1.3.6.1.4.1.11.2.14.11.5.1.44.1.11.1,HP-ICF-OSPFV3-MIB::hpicfOspfv3LogEntry,,not-accessible,hpicfOspfv3LogType,current,,The configuration parameters for OSPFv3 event log entry.
.1.3.6.1.4.1.11.2.14.11.5.1.44.1.11.1.1,HP-ICF-OSPFV3-MIB::hpicfOspfv3LogType,INTEGER,not-accessible,,current,neighborAdjacencyChanges(1):other(2),The type of the event log in OSPFv3  routing protocol .
.1.3.6.1.4.1.11.2.14.11.5.1.44.1.11.1.2,HP-ICF-OSPFV3-MIB::hpicfOspfv3LogAction,INTEGER,read-write,,current,enabled(1):disabled(2):enabledWithDetail(3),The mode of OSPFv3 event logging. If the OSPFv3 log type is set to  neighborAdjacencyChanges, then meaninng of this field is as follows: if enabled, it logs only the adjacency  state transitions to final states. if enabledWithDetail option, it logs all  the state transitions and other events and error conditions related to adjacency.  if disabled, none of the adjacency related events are logged.
.1.3.6.1.4.1.11.2.14.11.5.1.44.1.12,HP-ICF-OSPFV3-MIB::hpicfOspfv3RouterLSATable,,not-accessible,,current,,This table having Area scope is a dependent-expansion table for the Router LSA entry in the Area LSDB table. It represents the list of per interface details advertised in a Router LSA.
.1.3.6.1.4.1.11.2.14.11.5.1.44.1.12.1,HP-ICF-OSPFV3-MIB::hpicfOspfv3RouterLSAEntry,,not-accessible,ospfv3AreaLsdbAreaId:ospfv3AreaLsdbType:ospfv3AreaLsdbRouterId:ospfv3AreaLsdbLsid:hpicfOspfv3RouterLSANbrIfId:hpicfOspfv3RouterLSANbrRtrId,current,,A single Area-Scope Link State Advertisement.
.1.3.6.1.4.1.11.2.14.11.5.1.44.1.12.1.1,HP-ICF-OSPFV3-MIB::hpicfOspfv3RouterLSANbrIfId,Unsigned32,not-accessible,,current,,The Interface Id of the neighbor's router that  originating router in the Autonomous System.
.1.3.6.1.4.1.11.2.14.11.5.1.44.1.12.1.2,HP-ICF-OSPFV3-MIB::hpicfOspfv3RouterLSANbrRtrId,Unsigned32,not-accessible,,current,,The router id of the router which is connected over the interface Id.
.1.3.6.1.4.1.11.2.14.11.5.1.44.1.12.1.3,HP-ICF-OSPFV3-MIB::hpicfOspfv3RouterLSAIfType,Unsigned32,read-only,,current,,The 32-bit identifier of the Area from which the  LSA was received.
.1.3.6.1.4.1.11.2.14.11.5.1.44.1.12.1.4,HP-ICF-OSPFV3-MIB::hpicfOspfv3RouterLSAMetric,Unsigned32,read-only,,current,,The interface Id of the router that connectes to the other router.
.1.3.6.1.4.1.11.2.14.11.5.1.44.1.12.1.5,HP-ICF-OSPFV3-MIB::hpicfOspfv3RouterLSAIfId,Unsigned32,read-only,,current,,The interface Id of the router that connectes to the other router.
.1.3.6.1.4.1.11.2.14.11.5.1.44.1.13,HP-ICF-OSPFV3-MIB::hpicfOspfv3NetworkLSATable,,not-accessible,,current,,This table having Area scope is a dependent-expansion table for the Network LSA entry in the Area LSDB table. This table represents the list of routers advertised in a Network LSA.
.1.3.6.1.4.1.11.2.14.11.5.1.44.1.13.1,HP-ICF-OSPFV3-MIB::hpicfOspfv3NetworkLSAEntry,,not-accessible,ospfv3AreaLsdbAreaId:ospfv3AreaLsdbType:ospfv3AreaLsdbRouterId:ospfv3AreaLsdbLsid:hpicfOspfv3NetworkLSASeqNum,current,,A single Area-Scope Link State Advertisement.
.1.3.6.1.4.1.11.2.14.11.5.1.44.1.13.1.1,HP-ICF-OSPFV3-MIB::hpicfOspfv3NetworkLSASeqNum,Unsigned32,not-accessible,,current,,The 32-bit sequence number identifying the attached router-ids.
.1.3.6.1.4.1.11.2.14.11.5.1.44.1.13.1.2,HP-ICF-OSPFV3-MIB::hpicfOspfv3NetworkLSAAttachedRouter,Unsigned32,read-only,,current,,The 32-bit Router identifier of the attached Router.
.1.3.6.1.4.1.11.2.14.11.5.1.44.1.14,HP-ICF-OSPFV3-MIB::hpicfOspfv3IntraAPLSATable,,not-accessible,,current,,This table having Area scope is a dependent-expansion table for the Intra-Area-Prefix LSA entry in the Area LSDB table. This table represents the list of Address Prefixes advertised in a Intra-Area-Prefix LSA by the Designated Router in that Area.
.1.3.6.1.4.1.11.2.14.11.5.1.44.1.14.1,HP-ICF-OSPFV3-MIB::hpicfOspfv3IntraAPLSAEntry,,not-accessible,ospfv3AreaLsdbAreaId:ospfv3AreaLsdbType:ospfv3AreaLsdbRouterId:ospfv3AreaLsdbLsid:hpicfOspfv3IntraAPAddrPrefix:hpicfOspfv3IntraAPPrefixLength,current,,A single Area-Scope Link State Advertisement.
.1.3.6.1.4.1.11.2.14.11.5.1.44.1.14.1.1,HP-ICF-OSPFV3-MIB::hpicfOspfv3IntraAPAddrPrefix,OCTET,not-accessible,,current,,The advertised 16-byte Address Prefix.
.1.3.6.1.4.1.11.2.14.11.5.1.44.1.14.1.2,HP-ICF-OSPFV3-MIB::hpicfOspfv3IntraAPPrefixLength,Unsigned32,not-accessible,,current,,The Prefix Length of the Address Prefix.
.1.3.6.1.4.1.11.2.14.11.5.1.44.1.14.1.3,HP-ICF-OSPFV3-MIB::hpicfOspfv3IntraAPPrefixOptions,Unsigned32,read-only,,current,,The Prefix Options associated with the Address Prefix.
.1.3.6.1.4.1.11.2.14.11.5.1.44.1.14.1.4,HP-ICF-OSPFV3-MIB::hpicfOspfv3IntraAPMetric,Integer32,read-only,,current,,The Cost associated with the Address Prefix.
.1.3.6.1.4.1.11.2.14.11.5.1.44.1.15,HP-ICF-OSPFV3-MIB::hpicfOspfv3LinkLSATable,,not-accessible,,current,,The OSPFv3 Link LSA having Link scope.  The Link expanstion table contains the local address prefix fields of all the links on the  originating router
.1.3.6.1.4.1.11.2.14.11.5.1.44.1.15.1,HP-ICF-OSPFV3-MIB::hpicfOspfv3LinkLSAEntry,,not-accessible,ospfv3LinkLsdbIfIndex:ospfv3LinkLsdbIfInstId:ospfv3LinkLsdbType:ospfv3LinkLsdbRouterId:ospfv3LinkLsdbLsid:hpicfOspfv3LinkAddrPrefix:hpicfOspfv3LinkPrefixLength,current,,A single Link-Scope Link State Advertisement.
.1.3.6.1.4.1.11.2.14.11.5.1.44.1.15.1.1,HP-ICF-OSPFV3-MIB::hpicfOspfv3LinkAddrPrefix,OCTET,not-accessible,,current,,The Address prefix of all the links that has OSPFv3 configured in the originating router.
.1.3.6.1.4.1.11.2.14.11.5.1.44.1.15.1.2,HP-ICF-OSPFV3-MIB::hpicfOspfv3LinkPrefixLength,Unsigned32,not-accessible,,current,,The Prefix Length of the Address Prefix.
.1.3.6.1.4.1.11.2.14.11.5.1.44.1.15.1.3,HP-ICF-OSPFV3-MIB::hpicfOspfv3LinkPrefixOptions,Unsigned32,read-only,,current,,The Prefix Options associated with the Address Prefix.
.1.3.6.1.4.1.11.2.14.11.5.1.44.1.16,HP-ICF-OSPFV3-MIB::hpicfOspfv3Trap,,,,,,
.1.3.6.1.4.1.11.2.14.11.5.1.44.1.16.0,HP-ICF-OSPFV3-MIB::hpicfOspfv3Traps,,,,,,
.1.3.6.1.4.1.11.2.14.11.5.1.44.1.16.0.1,HP-ICF-OSPFV3-MIB::hpicfOspfv3IfStateChange,,,,,,An hpicfOspfv3IfStateChange notification signifies that there has been a change in the state of a non-virtual  OSPFv3 interface. This trap should be generated  when the interface state regresses (e.g., goes  from Dr to Down) or progresses to a terminal  state (i.e., Point-to-Point, DR Other, Dr, or  Backup).
.1.3.6.1.4.1.11.2.14.11.5.1.44.1.16.0.2,HP-ICF-OSPFV3-MIB::hpicfOspfv3VirtIfStateChange,,,,,,An hpicfOspfv3VirtIfStateChange notification signifies that there  has been a change in the state of an OSPFv3 virtual  interface.   This notification should be generated when the  inter-face state regresses (e.g., goes from Point-  to-Point to Down) or progresses to a terminal  state (i.e., Point-to-Point).
.1.3.6.1.4.1.11.2.14.11.5.1.44.1.16.0.3,HP-ICF-OSPFV3-MIB::hpicfOspfv3NbrStateChange,,,,,,An hpicfOspfv3NbrStateChange trap signifies that  there has been a change in the state of a non-  virtual OSPFv3 neighbor. This trap should be  generated when the neighbor state regresses  (e.g., goes from Attempt or Full to 1-Way or  Down) or progresses to a terminal state (e.g.,  2-Way or Full). When an neighbor transitions  from or to Full on non-broadcast multi-access  and broadcast networks, the trap should be gen-  erated by the designated router. A designated  router transitioning to Down will be noted by  hpicfOspfv3IfStateChange.
.1.3.6.1.4.1.11.2.14.11.5.1.44.1.16.0.4,HP-ICF-OSPFV3-MIB::hpicfOspfv3VirtNbrStateChange,,,,,,An hpicfOspfv3VirtNbrStateChange trap signifies that  there has been a change in the state of an  OSPFv3 virtual neighbor. This trap should  be generated when the neighbor state regresses (e.g., goes from Attempt or Full to 1-Way or Down) or progresses to a terminal state (e.g., Full).
.1.3.6.1.4.1.11.2.14.11.5.1.44.1.16.0.5,HP-ICF-OSPFV3-MIB::hpicfOspfv3IfConfigError,,,,,,An hpicfOspfv3IfConfigError trap signifies that a  packet has been received on a non-virtual in-  terface from a router whose configuration  parameters conflict with this router's confi-  guration parameters. Note that the event op-  tionMismatch should cause a trap only if it  prevents an adjacency from forming.
.1.3.6.1.4.1.11.2.14.11.5.1.44.1.16.0.6,HP-ICF-OSPFV3-MIB::hpicfOspfv3VirtIfConfigError,,,,,,An hpicfOspfv3VirtIfConfigError trap signifies that a  packet has been received on a virtual interface  from a router whose configuration parameters  conflict with this router's configuration  parameters. Note that the event optionMismatch  should cause a trap only if it prevents an ad-  jacency from forming.
.1.3.6.1.4.1.11.2.14.11.5.1.44.1.16.0.7,HP-ICF-OSPFV3-MIB::hpicfOspfv3IfRxBadPacket,,,,,,An hpicfOspfv3IfRxBadPacket trap signifies that an  OSPFv3 packet that cannot be parsed has been received on a non-virtual interface.
.1.3.6.1.4.1.11.2.14.11.5.1.44.1.16.0.8,HP-ICF-OSPFV3-MIB::hpicfOspfv3VirtIfRxBadPacket,,,,,,An hpicfOspfv3VirtIfRxBadPacket trap signifies that an  OSPFv3 packet that cannot be parsed has been received on a non-virtual interface.
.1.3.6.1.4.1.11.2.14.11.5.1.44.1.16.0.9,HP-ICF-OSPFV3-MIB::hpicfOspfv3TxRetransmit,,,,,,An hpicfOspfv3TxRetransmit trap signifies that an  OSPFv3 packet has been retransmitted on a non-  virtual interface. All packets that may be re-  transmitted are associated with an LSDB entry.  The LS type, LS ID, and Router ID are used to  identify the LSDB entry.
.1.3.6.1.4.1.11.2.14.11.5.1.44.1.16.0.10,HP-ICF-OSPFV3-MIB::hpicfOspfv3VirtIfTxRetransmit,,,,,,An hpicfOspfv3VirtIfTxRetransmit trap signifies that  an OSPFv3 packet has been retransmitted on a virtual  interface. All packets that may be retransmitted  are associated with an LSDB entry. The LS type,  LS ID, and Router ID are used to identify the LSDB  entry.
.1.3.6.1.4.1.11.2.14.11.5.1.44.1.16.0.11,HP-ICF-OSPFV3-MIB::hpicfOspfv3OriginateLsa,,,,,,An hpicfOspfv3OriginateLsa trap signifies that a new  LSA has been originated by this router. This  trap should not be invoked for simple refreshes  of LSAs (which happesn every 30 minutes), but  instead will only be invoked when an LSA is  (re)originated due to a topology change. Addi-  tionally, this trap does not include LSAs that  are being flushed because they have reached  MaxAge.
.1.3.6.1.4.1.11.2.14.11.5.1.44.1.16.0.12,HP-ICF-OSPFV3-MIB::hpicfOspfv3MaxAgeLsa,,,,,,An hpicfOspfv3MaxAgeLsa trap signifies that one of  the LSA in the router's link-state database has  aged to MaxAge.
.1.3.6.1.4.1.11.2.14.11.5.1.44.1.16.0.13,HP-ICF-OSPFV3-MIB::hpicfOspfv3UnknownLsa,,,,,,An hpicfOspfv3UnknownLsa trap signifies that one of  the neighbor has sent an unknown LSA. Only DR generates  this trap and If NBR state is less than Exchange  need not originate this trap
.1.3.6.1.4.1.11.2.14.11.5.1.44.1.16.0.16,HP-ICF-OSPFV3-MIB::hpicfOspfv3AsbrStatusChange,,,,,,An hpicfOspfv3AsbrStatusChange trap signifies  that device's ASBR Status has changed.
.1.3.6.1.4.1.11.2.14.11.5.1.44.1.16.0.17,HP-ICF-OSPFV3-MIB::hpicfOspfv3AbrStatusChange,,,,,,An hpicfOspfv3AbrStatusChange trap signifies  that device's ABR Status has changed.  There are two distinct definitions  of ABR given by IBM & Cisco, Implementations are free  to follow their own interpretation of ABR while  originating this trap
.1.3.6.1.4.1.11.2.14.11.5.1.44.1.16.1,HP-ICF-OSPFV3-MIB::hpicfOspfv3TrapControl,,,,,,
.1.3.6.1.4.1.11.2.14.11.5.1.44.1.16.1.1,HP-ICF-OSPFV3-MIB::hpicfOspfv3SetTrap,OCTET,read-write,,current,,A four-octet string serving as a bit map for  the trap events defined by the OSPFv3 traps. This  object is used to enable and disable specific  OSPFv3 traps where a 1 in the bit field represents  enabled. The right-most bit (least significant)  represents trap 0.
.1.3.6.1.4.1.11.2.14.11.5.1.44.1.16.1.2,HP-ICF-OSPFV3-MIB::hpicfOspfv3LsdbAreaId,Unsigned32,accessible-for-notify,,current,,The 32-bit identifier of the Area from which the  LSA was received.
.1.3.6.1.4.1.11.2.14.11.5.1.44.1.16.1.3,HP-ICF-OSPFV3-MIB::hpicfOspfv3LsdbType,Unsigned32,accessible-for-notify,,current,,The type of the link state advertisement.  Each link state type has a separate  advertisement format. Area-Scope LSAs unrecognized  by the router are also stored in this database.
.1.3.6.1.4.1.11.2.14.11.5.1.44.1.16.1.4,HP-ICF-OSPFV3-MIB::hpicfOspfv3LsdbRouterId,Unsigned32,accessible-for-notify,,current,,The 32-bit number that uniquely identifies the  originating router in the Autonomous System.
.1.3.6.1.4.1.11.2.14.11.5.1.44.1.16.1.5,HP-ICF-OSPFV3-MIB::hpicfOspfv3LsdbLsid,Unsigned32,accessible-for-notify,,current,,The Link State ID is an LS Type Specific field  containing a unique identifier;  it identifies the piece of the routing domain  that is being described by the advertisement.  In contrast to OSPFv2, the LSID has no  addressing semantics.
.1.3.6.1.4.1.11.2.14.11.5.1.44.2,HP-ICF-OSPFV3-MIB::hpicfOspfv3Conformance,,,,,,
.1.3.6.1.4.1.11.2.14.11.5.1.44.2.1,HP-ICF-OSPFV3-MIB::hpicfOspfv3Groups,,,,,,
.1.3.6.1.4.1.11.2.14.11.5.1.44.2.1.1,HP-ICF-OSPFV3-MIB::hpicfOspfv3BasicGroup,,,,,,These objects are used for managing/monitoring  OSPFv3 global parameters.
.1.3.6.1.4.1.11.2.14.11.5.1.44.2.1.2,HP-ICF-OSPFV3-MIB::hpicfOspfv3AsLsdbGroup,,,,,,These objects are used for OSPFv3 systems  that display their AS-scope link state database.
.1.3.6.1.4.1.11.2.14.11.5.1.44.2.1.3,HP-ICF-OSPFV3-MIB::hpicfOspfv3AreaLsdbGroup,,,,,,These objects are used for OSPFv3 systems  that display their Area-scope link state database.
.1.3.6.1.4.1.11.2.14.11.5.1.44.2.1.4,HP-ICF-OSPFV3-MIB::hpicfOspfv3LinkLsdbGroup,,,,,,These objects are used for OSPFv3 systems  that display their Link-scope link state database  for non-virtual interfaces.
.1.3.6.1.4.1.11.2.14.11.5.1.44.2.1.5,HP-ICF-OSPFV3-MIB::hpicfOspfv3IfGroup,,,,,,These interface objects used for  managing/monitoring OSPFv3 interfaces.
.1.3.6.1.4.1.11.2.14.11.5.1.44.2.1.6,HP-ICF-OSPFV3-MIB::hpicfOspfv3NbrGroup,,,,,,These neighbor objects are used for  managing/monitoring OSPFv3 neighbors.
.1.3.6.1.4.1.11.2.14.11.5.1.44.2.1.7,HP-ICF-OSPFV3-MIB::hpicfOspfv3StatisticGroup,,,,,,A collection of objects that contain  OSPF interface and SPF statistics.
.1.3.6.1.4.1.11.2.14.11.5.1.44.2.1.8,HP-ICF-OSPFV3-MIB::hpicfOspfv3LogGroup,,,,,,A collection of objects for configuring the logging of OSPFv3 adjacency related  events.
.1.3.6.1.4.1.11.2.14.11.5.1.44.2.1.9,HP-ICF-OSPFV3-MIB::hpicfOspfv3TrapControlGroup,,,,,,A collection of object which is for controlling  the hpicfOspfv3Traps.
.1.3.6.1.4.1.11.2.14.11.5.1.44.2.1.10,HP-ICF-OSPFV3-MIB::hpicfOspfv3TrapsGroup,,,,,,A collection of hpicfOspfv3 traps.
.1.3.6.1.4.1.11.2.14.11.5.1.44.2.2,HP-ICF-OSPFV3-MIB::hpicfOspfv3Compliances,,,,,,
.1.3.6.1.4.1.11.2.14.11.5.1.44.2.2.1,HP-ICF-OSPFV3-MIB::hpicfOspfv3Compliance,,,,,,The compliance statement
.1.3.6.1.4.1.11.2.14.11.5.1.45,HP-ICF-OID::hpicfInstMIB,,,,,,
.1.3.6.1.4.1.11.2.14.11.5.1.45.1,HP-ICF-INST-MIB::hpicfInstObjects,,,,,,
.1.3.6.1.4.1.11.2.14.11.5.1.45.1.1,HP-ICF-INST-MIB::hpicfInstEnable,INTEGER,read-only,,current,true(1):false(2),The operational status of Instrumentation on this switch.
.1.3.6.1.4.1.11.2.14.11.5.1.45.1.2,HP-ICF-INST-MIB::hpicfInstMaxMemMB,Integer32,read-write,,current,,The maximum memory that can be used by Instrumentation,
.1.3.6.1.4.1.11.2.14.11.5.1.45.1.3,HP-ICF-INST-MIB::hpicfInstParameterTable,,not-accessible,,current,,Values of monitored instrumentation parameters.
.1.3.6.1.4.1.11.2.14.11.5.1.45.1.3.1,HP-ICF-INST-MIB::hpicfInstParameterEntry,,not-accessible,hpicfInstParameterIndex:hpicfInstInterfaceIndex:hpicfInstIntervalIndex,current,,An entry in the hpicfInstParameterTable.
.1.3.6.1.4.1.11.2.14.11.5.1.45.1.3.1.1,HP-ICF-INST-MIB::hpicfInstParameterIndex,Integer32,not-accessible,,current,,The index of the parameter.
.1.3.6.1.4.1.11.2.14.11.5.1.45.1.3.1.2,HP-ICF-INST-MIB::hpicfInstInterfaceIndex,Integer32,not-accessible,,current,,Interface index i.e. port number for per port parameters 
.1.3.6.1.4.1.11.2.14.11.5.1.45.1.3.1.3,HP-ICF-INST-MIB::hpicfInstIntervalIndex,Integer32,not-accessible,,current,,The index of the interval.
.1.3.6.1.4.1.11.2.14.11.5.1.45.1.3.1.4,HP-ICF-INST-MIB::hpicfInstParameterName,OCTET,read-only,,current,,The name of the parameter.
.1.3.6.1.4.1.11.2.14.11.5.1.45.1.3.1.5,HP-ICF-INST-MIB::hpicfInstIntervalName,OCTET,read-only,,current,,The name of the interval.
.1.3.6.1.4.1.11.2.14.11.5.1.45.1.3.1.6,HP-ICF-INST-MIB::hpicfInstParameterValue,Unsigned32,read-only,,current,,The current parameter value for the given interface and interval.
.1.3.6.1.4.1.11.2.14.11.5.1.45.1.3.1.7,HP-ICF-INST-MIB::hpicfInstParamValMin,Unsigned32,read-only,,current,,The minimum value of the parameter for the 
.1.3.6.1.4.1.11.2.14.11.5.1.45.1.3.1.8,HP-ICF-INST-MIB::hpicfInstParamValMax,Unsigned32,read-only,,current,,The maximum value of the parameter for the 
.1.3.6.1.4.1.11.2.14.11.5.1.45.2,HP-ICF-INST-MIB::hpicfInstConformance,,,,,,
.1.3.6.1.4.1.11.2.14.11.5.1.45.2.1,HP-ICF-INST-MIB::hpicfInstGroups,,,,,,
.1.3.6.1.4.1.11.2.14.11.5.1.45.2.1.2,HP-ICF-INST-MIB::hpicfInstBaseGroup,,,,,,A collection of objects to support basic Instrumentation configuration on HP switches.
.1.3.6.1.4.1.11.2.14.11.5.1.45.2.2,HP-ICF-INST-MIB::hpicfInstCompliances,,,,,,
.1.3.6.1.4.1.11.2.14.11.5.1.45.2.2.1,HP-ICF-INST-MIB::hpicfInstBaseCompliance,,,,,,The compliance statement for HP switches running Instrumentation and implementing the HP-ICF-INST MIB.
.1.3.6.1.4.1.11.2.14.11.5.1.46,HP-ICF-OID::hpicfFtrCo,,,,,,
.1.3.6.1.4.1.11.2.14.11.5.1.46.1,HP-ICF-FTRCO::hpicfFtrcoObjects,,,,,,
.1.3.6.1.4.1.11.2.14.11.5.1.46.1.1,HP-ICF-FTRCO::hpFtrCoEntityTable,,not-accessible,,current,,Table of all Entities setting restrictions, as set by some external entity. Any restriction for an Entity can be deleted by deleting the  Entity name, by deleting a specific restriction, or by any expiration value. Once an Entity name has been added to the table, it exist until the name has specifically been removed. Entity rows also maintain the 'next-index' value for any restriction table entry.
.1.3.6.1.4.1.11.2.14.11.5.1.46.1.1.1,HP-ICF-FTRCO::hpFtrCoEntityEntry,,not-accessible,hpFtrCoEntityName,current,,A row entry in the table for a specific entity user of the Feature Coordinator facility. Entries in this table are created and removed dynamically. An entity can add and remove a restriction regarding  some pre-defined facility in the switch and it will only be for a  specific Entity name. If the Entity name is removed, so are all of its restrictions.
.1.3.6.1.4.1.11.2.14.11.5.1.46.1.1.1.1,HP-ICF-FTRCO::hpFtrCoEntityName,OCTET,not-accessible,,current,,An administratively assigned string, which may be used to identify  the unique owner of a set of restrictions.
.1.3.6.1.4.1.11.2.14.11.5.1.46.1.1.1.2,HP-ICF-FTRCO::hpFtrCoRestrictNextIndex,Integer32,read-create,,current,,Is the next indexing parameter that allows multiple, like  restrictions. It is has a default value of 1 and is incremented each time its index value is used. This is an independent value and must be specified as the next added index (regardless of the restriction type). In the event there is a collision due to a race with reading the current value, the 'losing' restriction is denied and the value should be re-read for a next attempt. The value is always 1 whenever a new Entity record is created.
.1.3.6.1.4.1.11.2.14.11.5.1.46.1.1.1.3,HP-ICF-FTRCO::hpFtrCoEntityDate,OCTET,read-only,,current,,This represents the switch's understanding of the current UTC time. It should be used when setting an restriction expiration  DateAndTime value. Please note that this value is uniquely  determined each time the object is read (dynamic) and is  subject to changing when a change is made to the switch's configuration (e.g. setting the local time-zone).
.1.3.6.1.4.1.11.2.14.11.5.1.46.1.1.1.4,HP-ICF-FTRCO::hpFtrCoEntityStatus,INTEGER,read-create,,current,active(1):notInService(2):notReady(3):createAndGo(4):createAndWait(5):destroy(6),Administrative status of this Entity entry.
.1.3.6.1.4.1.11.2.14.11.5.1.46.1.2,HP-ICF-FTRCO::hpFtrCoRestrictionTable,,not-accessible,,current,,Table of all restrictions, set by an external entity. The restrictions can be deleted by deleting the entity name or by the restriction  expiration value. Expiration policies are logically ORed so that any policy  expiration that is met causes the restriction to be removed.
.1.3.6.1.4.1.11.2.14.11.5.1.46.1.2.1,HP-ICF-FTRCO::hpFtrCoRestrictEntry,,not-accessible,hpFtrCoEntityName:hpFtrCoRestrictId:hpFtrCoRestrictIndex,current,,An entry in the table for a specific Entity user of the Feature  Coordinator facility. Entries in this table are created and removed  dynamically. An entity can add and remove a restriction to some  facility in the switch. These entries can also expire, based on  entity specified criteria. A restriction is never modified (all restrictions are only created or deleted). If a value needs to be  modified, a new restriction could be added and then the old one  deleted (e.g. adding or removing an interface).
.1.3.6.1.4.1.11.2.14.11.5.1.46.1.2.1.1,HP-ICF-FTRCO::hpFtrCoRestrictId,INTEGER,not-accessible,,current,vidIpConfig(1):vidDelete(2):portSecurity(3):portAcl(4):portSourcePortFilter(5):portMeshing(6):portLacp(7):distributedTrunk(8):portVirusThrottling(9):portSflow(10):portDhcpSnoop(11):portLoopDetection(12):portBpduPvstGuard(13):qinq(14):portQos(15):portRateLimit(16):portStaticMac(17):portIpLockdown(18):portIgmp(19):portMirrorDestination(20):portLinkConfig(21):portLldp(22):portKeepalive(23):aclPermitLogging(24),The Restriction enumeration (Id). Expect this list to grow as are  more restrictions are developed (and needed).
.1.3.6.1.4.1.11.2.14.11.5.1.46.1.2.1.2,HP-ICF-FTRCO::hpFtrCoRestrictIndex,Integer32,not-accessible,,current,,An indexing parameter to allow multiple, like restrictions. It is  created by the Entity portion of MIB and used for addressing an  individual restriction rule. Any new restriction added to a restriction table must be equal to the current 'next-restriction' value.
.1.3.6.1.4.1.11.2.14.11.5.1.46.1.2.1.3,HP-ICF-FTRCO::hpFtrCoRestrictIdParm,Integer32,read-create,,current,,An optional parameter for the restriction enumeration.
.1.3.6.1.4.1.11.2.14.11.5.1.46.1.2.1.4,HP-ICF-FTRCO::hpFtrCoRestrictStatus,INTEGER,read-create,,current,active(1):notInService(2):notReady(3):createAndGo(4):createAndWait(5):destroy(6),Administrative status of this entry.
.1.3.6.1.4.1.11.2.14.11.5.1.46.1.2.1.5,HP-ICF-FTRCO::hpFtrCoRestrictMessage,OCTET,read-create,,current,,An error message containing information about the restriction that  can be used by the caller, indicating the reason for this restriction  being in place. It is occasionally referred to as a friendly error message. SIZE reflects that a message must exist and that it has a maximum 'String' length of 255 character.
.1.3.6.1.4.1.11.2.14.11.5.1.46.1.2.1.6,HP-ICF-FTRCO::hpFtrCoRestrictPorts,OCTET,read-create,,current,,A list of ports, if applicable to the restriction.
.1.3.6.1.4.1.11.2.14.11.5.1.46.1.2.1.7,HP-ICF-FTRCO::hpFtrCoRestrictVlans,OCTET,read-create,,current,,A VidList of vlan IDs, if applicable to the restriction.
.1.3.6.1.4.1.11.2.14.11.5.1.46.1.2.1.8,HP-ICF-FTRCO::hpFtrCoExpireSlot,Integer32,read-create,,current,,Setting this value will cause this restriction to expire when  corresponding switch slot is signaled to be down. Note, if the slot  never comes up, there will be no slot-down signal.
.1.3.6.1.4.1.11.2.14.11.5.1.46.1.2.1.9,HP-ICF-FTRCO::hpFtrCoExpireApplication,OCTET,read-create,,current,,This setting will cause the restriction to expire whenever a signal  is received that this application-name has gone down.
.1.3.6.1.4.1.11.2.14.11.5.1.46.1.2.1.10,HP-ICF-FTRCO::hpFtrCoExpireVidDelete,Integer32,read-create,,current,,A signal indicating this VlanIndex has been deleted will cause this  restriction to expire. The specified VID record must exist in the  switch configuration for this policy to be set. NOTE: ExpireVidDelete is unused in this release; it is available, you can set it; but it is  totally ignored with current processing.
.1.3.6.1.4.1.11.2.14.11.5.1.46.1.2.1.11,HP-ICF-FTRCO::hpFtrCoExpireDate,OCTET,read-create,,current,,This expiration event occurs whenever it is determined that the switch-time exceeds this setting. The switches sw_time() represents the UTC time value (relative to Jan 1, 1990) used with this comparison (compare with sw_localtime). NOTE: ExpireDate is unused in this release; it is available, you can set it; but it is totally ignored with current processing.
.1.3.6.1.4.1.11.2.14.11.5.1.46.1.2.1.12,HP-ICF-FTRCO::hpFtrCoExpireBoot,INTEGER,read-create,,current,true(1):false(2),When specified as 'true', this expiration event occurs whenever the  switch reboots. It is a necessary expiration policy since all  restrictions are persistent and it is possible that we can have an  obsolete policy (slot-down) following a power-fail condition.
.1.3.6.1.4.1.11.2.14.11.5.1.46.2,HP-ICF-FTRCO::hpicfFtrCoConformance,,,,,,
.1.3.6.1.4.1.11.2.14.11.5.1.46.2.1,HP-ICF-FTRCO::hpicfFtrCoCompliances,,,,,,
.1.3.6.1.4.1.11.2.14.11.5.1.46.2.1.1,HP-ICF-FTRCO::hpicfFtrCoCompliance,,,,,,The compliance statement for HP switches implementing the HP-ICF-FTRCO-MIB.
.1.3.6.1.4.1.11.2.14.11.5.1.46.2.2,HP-ICF-FTRCO::hpicfFtrCoGroups,,,,,,
.1.3.6.1.4.1.11.2.14.11.5.1.46.2.2.1,HP-ICF-FTRCO::hpicfFtrCoGroup,,,,,,A collection of HP proprietary objects to support Feature Coordinator.
.1.3.6.1.4.1.11.2.14.11.5.1.48,HP-ICF-OID::hpicfMldMIB,,,,,,
.1.3.6.1.4.1.11.2.14.11.5.1.48.1,HP-ICF-MLD-MIB::hpicfMldObjects,,,,,,
.1.3.6.1.4.1.11.2.14.11.5.1.48.1.1,HP-ICF-MLD-MIB::hpicfMld,,,,,,
.1.3.6.1.4.1.11.2.14.11.5.1.48.1.1.1,HP-ICF-MLD-MIB::hpicfMldControlUnknownMulticast,INTEGER,read-write,,current,true(1):false(2),When enabled along with MLD, any IPv6 Multicast  packets that are not joined by an MLD host will will be restricted to ports that have detected a multicast router or ports that are configured to  always forward IPv6 multicast. When set to disabled or when MLD is disabled, the unjoined IPv6 multicast packets will be flooded out all ports in the VLAN. Permanently assigned multicast addresses are always flooded and so are not impacted by this object.
.1.3.6.1.4.1.11.2.14.11.5.1.48.1.1.2,HP-ICF-MLD-MIB::hpicfMldConfigForcedLeaveInterval,Integer32,read-write,,current,,When a port's  hpicfMldPortConfigEntryForcedLeaveFeature is enabled, this is the amount of time allowed for an MLD Report to arrive and cancel deletion of a multicast group requested by a previous MLD Leave request. Units are tenths of seconds.
.1.3.6.1.4.1.11.2.14.11.5.1.48.1.1.3,HP-ICF-MLD-MIB::hpicfMldEnabledCount,Integer32,read-only,,current,,Current total count of interfaces with MLD enabled.
.1.3.6.1.4.1.11.2.14.11.5.1.48.1.1.4,HP-ICF-MLD-MIB::hpicfMldMcastGroupJoinsCount,Integer32,read-only,,current,,Current total count of Multicast groups joined.
.1.3.6.1.4.1.11.2.14.11.5.1.48.1.1.5,HP-ICF-MLD-MIB::hpicfMldIfTable,,not-accessible,,current,,HP extensions to the MLD standard MIB table mldIfTable.
.1.3.6.1.4.1.11.2.14.11.5.1.48.1.1.5.1,HP-ICF-MLD-MIB::hpicfMldIfEntry,,not-accessible,,current,,HP extensions for an entry in the mldInterfaceTable.
.1.3.6.1.4.1.11.2.14.11.5.1.48.1.1.5.1.1,HP-ICF-MLD-MIB::hpicfMldIfEntryQuerierFeature,INTEGER,read-write,,current,true(1):false(2),Turns MLD querier functionality on and off.
.1.3.6.1.4.1.11.2.14.11.5.1.48.1.1.5.1.2,HP-ICF-MLD-MIB::hpicfMldIfEntrySnoopingFeature,INTEGER,read-write,,current,true(1):false(2),When enabled along with MLD, any IPv6 Multicast  packets that are joined by an MLD host will be be restricted to ports which have received the joins. This can be overridden by other features like hpicfMldPortConfigEntryPortModeFeature.
.1.3.6.1.4.1.11.2.14.11.5.1.48.1.1.5.1.3,HP-ICF-MLD-MIB::hpicfMldIfEntryQuerierPort,Integer32,read-only,,current,,Logical port which the querier is connected to. This is  determined by the presence of querier packets on this port. This value is 0 if this device is querier.
.1.3.6.1.4.1.11.2.14.11.5.1.48.1.1.5.1.4,HP-ICF-MLD-MIB::hpicfMldIfEntryFilteredJoins,Integer32,read-only,,current,,Current total count of groups on this interface being tracked on a per port basis. Traffic for these groups will be filtered to flow only to ports with active joins, subject to HW resource limitations such as the maximum number of groups supported by the hardware.
.1.3.6.1.4.1.11.2.14.11.5.1.48.1.1.5.1.5,HP-ICF-MLD-MIB::hpicfMldIfEntryStandardJoins,Integer32,read-only,,current,,Current total count of groups on this interface being traced on a per interface basis. Traffic for these groups are flooded to the ports on the interface. These can come form joinees on interfaces which do not have MLD snooping turned on. They can also come from interfaces which have MLD snooping on, but HW resources have been exhausted for bridging traffic based on joins.
.1.3.6.1.4.1.11.2.14.11.5.1.48.1.1.5.1.6,HP-ICF-MLD-MIB::hpicfMldIfEntryPortsWithMcastRouter,OCTET,read-only,,current,,This indicates which ports have a multicast router detected on them.
.1.3.6.1.4.1.11.2.14.11.5.1.48.1.1.5.1.7,HP-ICF-MLD-MIB::hpicfMldIfEntryStatGeneralQueryRx,Counter32,read-only,,current,,The number of times an Mld General Service Query has been received on this interface.
.1.3.6.1.4.1.11.2.14.11.5.1.48.1.1.5.1.8,HP-ICF-MLD-MIB::hpicfMldIfEntryStatQueryTx,Counter32,read-only,,current,,The number of times a query has been sent from this interface.
.1.3.6.1.4.1.11.2.14.11.5.1.48.1.1.5.1.9,HP-ICF-MLD-MIB::hpicfMldIfEntryStatGSQRx,Counter32,read-only,,current,,The number of times a group specific query has been received from  this interface.
.1.3.6.1.4.1.11.2.14.11.5.1.48.1.1.5.1.10,HP-ICF-MLD-MIB::hpicfMldIfEntryStatGSQTx,Counter32,read-only,,current,,The number of times a group specific query has been sent from  this interface.
.1.3.6.1.4.1.11.2.14.11.5.1.48.1.1.5.1.11,HP-ICF-MLD-MIB::hpicfMldIfEntryStatMldV1ReportRx,Counter32,read-only,,current,,The number of times an MLD version 1 report has been received on this interface.
.1.3.6.1.4.1.11.2.14.11.5.1.48.1.1.5.1.12,HP-ICF-MLD-MIB::hpicfMldIfEntryStatMldV2ReportRx,Counter32,read-only,,current,,The number of times an MLD version 2 report has been received on  this interface.
.1.3.6.1.4.1.11.2.14.11.5.1.48.1.1.5.1.13,HP-ICF-MLD-MIB::hpicfMldIfEntryStatMldV1LeaveRx,Counter32,read-only,,current,,The number of times an MLD version 1 leave has been received on this interface.
.1.3.6.1.4.1.11.2.14.11.5.1.48.1.1.5.1.14,HP-ICF-MLD-MIB::hpicfMldIfEntryStatUnknownMldTypeRx,Counter32,read-only,,current,,The number of times an Mld packet of unknown type has been received on this interface.
.1.3.6.1.4.1.11.2.14.11.5.1.48.1.1.5.1.15,HP-ICF-MLD-MIB::hpicfMldIfEntryStatUnknownPktRx,Counter32,read-only,,current,,The number of times a packet of unknown type has been sent to the MLD protocol on this device on this interface.
.1.3.6.1.4.1.11.2.14.11.5.1.48.1.1.5.1.16,HP-ICF-MLD-MIB::hpicfMldIfEntryStatForwardToRoutersTx,Counter32,read-only,,current,,The number of times a packet has been forwarded to routers on this interface.
.1.3.6.1.4.1.11.2.14.11.5.1.48.1.1.5.1.17,HP-ICF-MLD-MIB::hpicfMldIfEntryStatForwardToAllPortsTx,Counter32,read-only,,current,,The number of times a packet has been forwarded to all ports on this interface.
.1.3.6.1.4.1.11.2.14.11.5.1.48.1.1.5.1.18,HP-ICF-MLD-MIB::hpicfMldIfEntryStatFastLeaves,Counter32,read-only,,current,,The number of times a fast leave has occurred on this interface.
.1.3.6.1.4.1.11.2.14.11.5.1.48.1.1.5.1.19,HP-ICF-MLD-MIB::hpicfMldIfEntryStatForcedFastLeaves,Counter32,read-only,,current,,The number of times a forced fast leave has occurred on this interface.
.1.3.6.1.4.1.11.2.14.11.5.1.48.1.1.5.1.20,HP-ICF-MLD-MIB::hpicfMldIfEntryStatJoinTimeouts,Counter32,read-only,,current,,The number of times a join has timeout out on this interface.
.1.3.6.1.4.1.11.2.14.11.5.1.48.1.1.5.1.21,HP-ICF-MLD-MIB::hpicfMldIfEntryStatWrongVersionQueries,Counter32,read-only,,current,,The number of general queries received whose MLD version does not match the equivalent Interface Version.
.1.3.6.1.4.1.11.2.14.11.5.1.48.1.1.5.1.22,HP-ICF-MLD-MIB::hpicfMldIfEntryLastMemberQueryCount,Counter32,read-only,,current,,Represents the number of group-specific and group-and-source-specific queries sent by the router before it assumes there are no local members.
.1.3.6.1.4.1.11.2.14.11.5.1.48.1.1.5.1.23,HP-ICF-MLD-MIB::hpicfMldIfEntryStartupQueryCount,Counter32,read-only,,current,,Represents the number of Queries sent out on startup, separated by the Startup Query Interval (hpicfMldIfEntryStartupQueryInterval) 
.1.3.6.1.4.1.11.2.14.11.5.1.48.1.1.5.1.24,HP-ICF-MLD-MIB::hpicfMldIfEntryStartupQueryInterval,Unsigned32,read-only,,current,,Represents the interval between General Queries sent by a Querier on startup.
.1.3.6.1.4.1.11.2.14.11.5.1.48.1.1.5.1.25,HP-ICF-MLD-MIB::hpicfMldIfEntryStatExcludeGroupJoinsCount,Counter32,read-only,,current,,Current number of groups on this interface which are in EXCLUDE mode.
.1.3.6.1.4.1.11.2.14.11.5.1.48.1.1.5.1.26,HP-ICF-MLD-MIB::hpicfMldIfEntryStatIncludeGroupJoinsCount,Counter32,read-only,,current,,Current number of groups on this interface which are in INCLUDE mode.
.1.3.6.1.4.1.11.2.14.11.5.1.48.1.1.5.1.27,HP-ICF-MLD-MIB::hpicfMldIfEntryStatFilteredExcludeGroupJoinsCount,Counter32,read-only,,current,,Current number of filtered groups on this interface which are in EXCLUDE mode.
.1.3.6.1.4.1.11.2.14.11.5.1.48.1.1.5.1.28,HP-ICF-MLD-MIB::hpicfMldIfEntryStatFilteredIncludeGroupJoinsCount,Counter32,read-only,,current,,Current number of filtered groups on this interface which are in INCLUDE mode.
.1.3.6.1.4.1.11.2.14.11.5.1.48.1.1.5.1.29,HP-ICF-MLD-MIB::hpicfMldIfEntryStatStandardExcludeGroupJoinsCount,Counter32,read-only,,current,,Current number of standard groups on this interface which are in EXCLUDE Mode. Traffic for these groups is flooded to the ports on the interface. These can come form joins on interfaces which do not have MLD snooping turned on. They can also come from interfaces which have MLD snooping on, but hardware resources have been exhausted for bridging traffic based on joins.
.1.3.6.1.4.1.11.2.14.11.5.1.48.1.1.5.1.30,HP-ICF-MLD-MIB::hpicfMldIfEntryStatStandardIncludeGroupJoinsCount,Counter32,read-only,,current,,Current number of standard groups on this interface which are in INCLUDE Mode. Traffic for these groups is flooded to the ports on the interface. These can come form joins on interfaces which do not have MLD snooping turned on. They can also come from interfaces which have MLD snooping on, but hardware resources have been exhausted for bridging traffic based on joins.
.1.3.6.1.4.1.11.2.14.11.5.1.48.1.1.5.1.31,HP-ICF-MLD-MIB::hpicfMldIfEntryStatV1QueryTx,Counter32,read-only,,current,,The number of V1 Queries transmitted on this interface.
.1.3.6.1.4.1.11.2.14.11.5.1.48.1.1.5.1.32,HP-ICF-MLD-MIB::hpicfMldIfEntryStatV1QueryRx,Counter32,read-only,,current,,The number of V1 Queries received on this interface.
.1.3.6.1.4.1.11.2.14.11.5.1.48.1.1.5.1.33,HP-ICF-MLD-MIB::hpicfMldIfEntryStatV2QueryTx,Counter32,read-only,,current,,The number of V2 Queries transmitted on this interface.
.1.3.6.1.4.1.11.2.14.11.5.1.48.1.1.5.1.34,HP-ICF-MLD-MIB::hpicfMldIfEntryStatV2QueryRx,Counter32,read-only,,current,,The number of V2 Queries received on this interface.
.1.3.6.1.4.1.11.2.14.11.5.1.48.1.1.5.1.35,HP-ICF-MLD-MIB::hpicfMldIfEntryStatGSSQTx,Counter32,read-only,,current,,The number of Group Source Specific Queries transmitted on this interface.
.1.3.6.1.4.1.11.2.14.11.5.1.48.1.1.5.1.36,HP-ICF-MLD-MIB::hpicfMldIfEntryStatGSSQRx,Counter32,read-only,,current,,The number of Group Source Specific Queries received on this interface
.1.3.6.1.4.1.11.2.14.11.5.1.48.1.1.5.1.37,HP-ICF-MLD-MIB::hpicfMldIfEntryStatMalformedPktRx,Counter32,read-only,,current,,The number of malformed packets received on this interface.
.1.3.6.1.4.1.11.2.14.11.5.1.48.1.1.5.1.38,HP-ICF-MLD-MIB::hpicfMldIfEntryStatBadCheckSumRx,Counter32,read-only,,current,,The number of bad checksum packets received on this interface.
.1.3.6.1.4.1.11.2.14.11.5.1.48.1.1.5.1.39,HP-ICF-MLD-MIB::hpicfMldIfEntryStatMartianSourceRx,Counter32,read-only,,current,,The number of packets received on this interface from Martian source. Martian source are the packets with invalid source address, e.g. 255.255.255.255.
.1.3.6.1.4.1.11.2.14.11.5.1.48.1.1.5.1.40,HP-ICF-MLD-MIB::hpicfMldIfEntryStatPacketsRxOnDisabled,Counter32,read-only,,current,,The number of MLD packets received on this interface when MLD is disabled.
.1.3.6.1.4.1.11.2.14.11.5.1.48.1.1.5.1.41,HP-ICF-MLD-MIB::hpicfMldIfEntryStrictVersionMode,INTEGER,read-write,,current,true(1):false(2),When true, MLD packets whose version matches the protocol version configured on this interface will be processed. Other version MLD packets will be dropped. When false, all protocol version packets will be processed irrespective of the configured version.
.1.3.6.1.4.1.11.2.14.11.5.1.48.1.1.5.1.42,HP-ICF-MLD-MIB::hpicfMldIfEntryStatMldV1ReportTx,Counter32,read-only,,current,,The number of times an MLD version 1 report was transmitted on this interface.
.1.3.6.1.4.1.11.2.14.11.5.1.48.1.1.5.1.43,HP-ICF-MLD-MIB::hpicfMldIfEntryStatMldV2ReportTx,Counter32,read-only,,current,,The number of times an MLD version 2 report was transmitted on this interface.
.1.3.6.1.4.1.11.2.14.11.5.1.48.1.1.5.1.44,HP-ICF-MLD-MIB::hpicfMldIfEntryState,INTEGER,read-only,,current,initialWait(1):querierElection(2):querier(3):nonQuerier(4),Represents the MLD interface state.
.1.3.6.1.4.1.11.2.14.11.5.1.48.1.1.5.1.45,HP-ICF-MLD-MIB::hpicfMldIfEntryStatV1GSQRx,Counter32,read-only,,current,,The number of V1 group specific queries received on  this interface.
.1.3.6.1.4.1.11.2.14.11.5.1.48.1.1.5.1.46,HP-ICF-MLD-MIB::hpicfMldIfEntryStatV1GSQTx,Counter32,read-only,,current,,The number of V1 group specific queries transmitted by this interface.
.1.3.6.1.4.1.11.2.14.11.5.1.48.1.1.5.1.47,HP-ICF-MLD-MIB::hpicfMldIfEntryStatV2GSQRx,Counter32,read-only,,current,,The number of V2 group specific queries received on this interface.
.1.3.6.1.4.1.11.2.14.11.5.1.48.1.1.5.1.48,HP-ICF-MLD-MIB::hpicfMldIfEntryStatV2GSQTx,Counter32,read-only,,current,,The number of V2 group specific queries transmitted by this interface.
.1.3.6.1.4.1.11.2.14.11.5.1.48.1.1.6,HP-ICF-MLD-MIB::hpicfMldCacheTable,,not-accessible,,current,,HP extensions to the MLD standard MIB table mldCacheTable.
.1.3.6.1.4.1.11.2.14.11.5.1.48.1.1.6.1,HP-ICF-MLD-MIB::hpicfMldCacheEntry,,not-accessible,hpicfMldCacheIfIndex:hpicfMldCacheAddress,current,,HP extensions for an entry in the mldCacheTable.
.1.3.6.1.4.1.11.2.14.11.5.1.48.1.1.6.1.1,HP-ICF-MLD-MIB::hpicfMldCacheIfIndex,Integer32,not-accessible,,current,,The internetwork-layer interface for which this entry contains information for an IPv6 multicast group address.
.1.3.6.1.4.1.11.2.14.11.5.1.48.1.1.6.1.2,HP-ICF-MLD-MIB::hpicfMldCacheAddress,OCTET,not-accessible,,current,,The IPv6 multicast group address for which this entry contains information.
.1.3.6.1.4.1.11.2.14.11.5.1.48.1.1.6.1.3,HP-ICF-MLD-MIB::hpicfMldCacheSelf,INTEGER,read-create,,current,true(1):false(2),An indication of whether the local system is a member of this group address on this interface.
.1.3.6.1.4.1.11.2.14.11.5.1.48.1.1.6.1.4,HP-ICF-MLD-MIB::hpicfMldCacheLastReporter,OCTET,read-only,,current,,The IPv6 address of the source of the last membership report received for this IPv6 Multicast group address on this interface. If no membership report has been received, this object has the value 0::0.
.1.3.6.1.4.1.11.2.14.11.5.1.48.1.1.6.1.5,HP-ICF-MLD-MIB::hpicfMldCacheUpTime,TimeTicks,read-only,,current,,The time elapsed since this entry was created.
.1.3.6.1.4.1.11.2.14.11.5.1.48.1.1.6.1.6,HP-ICF-MLD-MIB::hpicfMldCacheExpiryTime,TimeTicks,read-only,,current,,The minimum amount of time remaining before this entry will be aged out. A value of 0 indicates that the entry is only present because mldCacheSelf is true and that if the router left the group, this entry would be aged out immediately. Note that some implementations may process Membership Reports from the local system in the same way as reports from other hosts, so a value of 0 is not required.
.1.3.6.1.4.1.11.2.14.11.5.1.48.1.1.6.1.7,HP-ICF-MLD-MIB::hpicfMldGroupType,INTEGER,read-only,,current,standard(1):filtered(2):mini(3),See HpicfMldGroupTypeDefinition description.
.1.3.6.1.4.1.11.2.14.11.5.1.48.1.1.6.1.8,HP-ICF-MLD-MIB::hpicfJoinedPorts,OCTET,read-only,,current,,Logical ports with active MLD joins on them for this entry. For Filtered groups this will be the logical ports which have active joins. For standard and mini groups this will include all logical ports on the interface running MLD.
.1.3.6.1.4.1.11.2.14.11.5.1.48.1.1.6.1.9,HP-ICF-MLD-MIB::hpicfMldCacheStatus,INTEGER,read-create,,current,active(1):notInService(2):notReady(3):createAndGo(4):createAndWait(5):destroy(6),The status of this row, by which new entries may be created, or existing entries deleted from this table.
.1.3.6.1.4.1.11.2.14.11.5.1.48.1.1.6.1.10,HP-ICF-MLD-MIB::hpicfMldCacheFilterMode,INTEGER,read-only,,current,include(1):exclude(2),The value indicates whether the group state is include(1) or exclude(2)
.1.3.6.1.4.1.11.2.14.11.5.1.48.1.1.6.1.11,HP-ICF-MLD-MIB::hpicfMldCacheExcludeModeExpiryTimer,TimeTicks,read-only,,current,,The time remaining before the group in EXCLUDE state expires and transitions to INCLUDE mode.
.1.3.6.1.4.1.11.2.14.11.5.1.48.1.1.6.1.12,HP-ICF-MLD-MIB::hpicfMldCacheVersion1HostTimer,TimeTicks,read-only,,current,,The time remaining until the local router will assume that there are no longer any MLD version 1 members on the IP subnet attached to this interface 
.1.3.6.1.4.1.11.2.14.11.5.1.48.1.1.6.1.13,HP-ICF-MLD-MIB::hpicfMldCacheSrcCount,Counter32,read-only,,current,,The number of sources either included or excluded for this group. If V1 host timer (hpicfMldCacheVersion1HostTimer) is active, this value will be zero.
.1.3.6.1.4.1.11.2.14.11.5.1.48.1.1.7,HP-ICF-MLD-MIB::hpicfMldPortConfigTable,,not-accessible,,current,,This table contains information about the MLD port configurations on this switch.
.1.3.6.1.4.1.11.2.14.11.5.1.48.1.1.7.1,HP-ICF-MLD-MIB::hpicfMldPortConfigEntry,,not-accessible,hpicfMldPortConfigEntryInterfaceIfIndex:hpicfMldPortConfigEntryIndex,current,,The information associated with each MLD port configuration.
.1.3.6.1.4.1.11.2.14.11.5.1.48.1.1.7.1.1,HP-ICF-MLD-MIB::hpicfMldPortConfigEntryInterfaceIfIndex,Integer32,not-accessible,,current,,The internetwork-layer interface value of the interface for which MLD is enabled.
.1.3.6.1.4.1.11.2.14.11.5.1.48.1.1.7.1.2,HP-ICF-MLD-MIB::hpicfMldPortConfigEntryIndex,Integer32,not-accessible,,current,,The ifIndex value which uniquely identifies a row in the  Interfaces Table for a port or trunk.
.1.3.6.1.4.1.11.2.14.11.5.1.48.1.1.7.1.3,HP-ICF-MLD-MIB::hpicfMldPortConfigEntryPortModeFeature,INTEGER,read-write,,current,auto(1):blocked(2):forward(3),The operational status of the MLD feature for this port or trunk. 1 implies that all IP Multicast traffic will be monitored on the port, 2 implies that IP Multicast traffic will be dropped on the port, and 3 implies that all IP Multicast traffic will be forwarded without the switch examining it.
.1.3.6.1.4.1.11.2.14.11.5.1.48.1.1.7.1.4,HP-ICF-MLD-MIB::hpicfMldPortConfigEntryForcedLeaveFeature,INTEGER,read-write,,current,true(1):false(2),The operational status of the MLD feature for this port or trunk indicates whether any MLD Leaves received for an IPv6 Multicast group will cause the group to be deleted after the hpicfMLDConfigForcedLeaveInterval if no new MLD Reports are received for that group. Normal behavior is for a group issuing a Leave to be deleted after the Querier's Maximum Response time if no MLD  Report is received.
.1.3.6.1.4.1.11.2.14.11.5.1.48.1.1.7.1.5,HP-ICF-MLD-MIB::hpicfMldPortConfigEntryFastLeaveFeature,INTEGER,read-write,,current,true(1):false(2),The operational status of the MLD feature for this port or trunk indicates whether any MLD Leaves received for an IPv6 Multicast group will cause the group to be deleted immediately on single- connection ports. Normal behavior is for a group  issuing a Leave to be deleted after the Querier's  Maximum Response time if no MLD Report is  received.
.1.3.6.1.4.1.11.2.14.11.5.1.48.1.1.8,HP-ICF-MLD-MIB::hpicfMldFilteredGroupPortCacheTable,,not-accessible,,current,,This table contains information about the MLD port configurations on this switch.
.1.3.6.1.4.1.11.2.14.11.5.1.48.1.1.8.1,HP-ICF-MLD-MIB::hpicfMldFilteredGroupPortCacheEntry,,not-accessible,hpicfMldFilteredGroupPortCacheIfIndex:hpicfMldFilteredGroupPortCacheGroupAddress:hpicfMldFilteredGroupPortCachePortIndex,current,,The information associated with each MLD port configuration.
.1.3.6.1.4.1.11.2.14.11.5.1.48.1.1.8.1.1,HP-ICF-MLD-MIB::hpicfMldFilteredGroupPortCacheIfIndex,Integer32,not-accessible,,current,,The internetwork-layer interface value of the interface for which MLD is enabled and for which this filtered  group exists.
.1.3.6.1.4.1.11.2.14.11.5.1.48.1.1.8.1.2,HP-ICF-MLD-MIB::hpicfMldFilteredGroupPortCacheGroupAddress,OCTET,not-accessible,,current,,The IPv6 multicast group address for which this  entry contains information.
.1.3.6.1.4.1.11.2.14.11.5.1.48.1.1.8.1.3,HP-ICF-MLD-MIB::hpicfMldFilteredGroupPortCachePortIndex,Integer32,not-accessible,,current,,The ifIndex value which uniquely identifies a row in the  Interfaces Table for a port or trunk.
.1.3.6.1.4.1.11.2.14.11.5.1.48.1.1.8.1.4,HP-ICF-MLD-MIB::hpicfMldFilteredGroupPortCacheExpiryTime,TimeTicks,read-only,,current,,The minimum amount of time remaining before this entry will be aged out.
.1.3.6.1.4.1.11.2.14.11.5.1.48.1.1.9,HP-ICF-MLD-MIB::hpicfMldSrcListTable,,not-accessible,,current,,HP extensions to the Mgmd standard MIB table mgmdRouterSrcListTable for Ipv6 type.
.1.3.6.1.4.1.11.2.14.11.5.1.48.1.1.9.1,HP-ICF-MLD-MIB::hpicfMldSrcListEntry,,not-accessible,hpicfMldSrcListIfIndex:hpicfMldSrcListAddress:hpicfMldSrcListHostAddress,current,,HP extensions to the Mgmd standard MIB table mgmdRouterSrcListTable for Ipv6 type.
.1.3.6.1.4.1.11.2.14.11.5.1.48.1.1.9.1.1,HP-ICF-MLD-MIB::hpicfMldSrcListIfIndex,Integer32,not-accessible,,current,,The internetwork-layer interface for which this entry contains information for an IPv6 multicast group address.
.1.3.6.1.4.1.11.2.14.11.5.1.48.1.1.9.1.2,HP-ICF-MLD-MIB::hpicfMldSrcListAddress,OCTET,not-accessible,,current,,The IPv6 multicast group address for which this entry contains information.
.1.3.6.1.4.1.11.2.14.11.5.1.48.1.1.9.1.3,HP-ICF-MLD-MIB::hpicfMldSrcListHostAddress,OCTET,not-accessible,,current,,The Host Address to which this entry corresponds.
.1.3.6.1.4.1.11.2.14.11.5.1.48.1.1.9.1.4,HP-ICF-MLD-MIB::hpicfMldSrcListPorts,OCTET,read-only,,current,,List of ports for which this entry is either excluded or included.
.1.3.6.1.4.1.11.2.14.11.5.1.48.1.1.9.1.5,HP-ICF-MLD-MIB::hpicfMldSrcListExpiry,TimeTicks,read-only,,current,,This value indicates the relevance of the SrcList entry, whereby a non-zero value indicates this is an INCLUDE state value, and a zero value indicates this to be an EXCLUDE state value.
.1.3.6.1.4.1.11.2.14.11.5.1.48.1.1.9.1.6,HP-ICF-MLD-MIB::hpicfMldSrcListUpTime,TimeTicks,read-only,,current,,The time elapsed since this entry was created.
.1.3.6.1.4.1.11.2.14.11.5.1.48.1.1.9.1.7,HP-ICF-MLD-MIB::hpicfMldSrcListType,INTEGER,read-only,,current,standard(1):filtered(2):mini(3),See HpicfMldGroupTypeDefinition description.
.1.3.6.1.4.1.11.2.14.11.5.1.48.1.1.10,HP-ICF-MLD-MIB::hpicfMldPortSrcTable,,not-accessible,,current,,This table contains information about the MLD PortSrc configurations on this switch.
.1.3.6.1.4.1.11.2.14.11.5.1.48.1.1.10.1,HP-ICF-MLD-MIB::hpicfMldPortSrcEntry,,not-accessible,hpicfMldPortSrcIfIndex:hpicfMldPortSrcAddress:hpicfMldPortSrcHostAddress:hpicfMldPortSrcPortIndex,current,,HP extensions for an entry in the MLD PortSrc Table.
.1.3.6.1.4.1.11.2.14.11.5.1.48.1.1.10.1.1,HP-ICF-MLD-MIB::hpicfMldPortSrcIfIndex,Integer32,not-accessible,,current,,The internetwork-layer interface for which this entry contains information for an IPv6 multicast group address.
.1.3.6.1.4.1.11.2.14.11.5.1.48.1.1.10.1.2,HP-ICF-MLD-MIB::hpicfMldPortSrcAddress,OCTET,not-accessible,,current,,The IPv6 multicast group address for which this entry contains information.
.1.3.6.1.4.1.11.2.14.11.5.1.48.1.1.10.1.3,HP-ICF-MLD-MIB::hpicfMldPortSrcHostAddress,OCTET,not-accessible,,current,,The Host Address to which this entry corresponds.
.1.3.6.1.4.1.11.2.14.11.5.1.48.1.1.10.1.4,HP-ICF-MLD-MIB::hpicfMldPortSrcPortIndex,Integer32,not-accessible,,current,,The ifIndex value which uniquely identifies a row in the PortSrc Table for a port or trunk.
.1.3.6.1.4.1.11.2.14.11.5.1.48.1.1.10.1.5,HP-ICF-MLD-MIB::hpicfMldPortSrcExpiry,TimeTicks,read-only,,current,,This value indicates the relevance of the SrcList entry, whereby a non-zero value indicates this is an INCLUDE state value, and a zero value indicates this to be an EXCLUDE state value.
.1.3.6.1.4.1.11.2.14.11.5.1.48.1.1.10.1.6,HP-ICF-MLD-MIB::hpicfMldPortSrcUpTime,TimeTicks,read-only,,current,,The time elapsed since this entry was created.
.1.3.6.1.4.1.11.2.14.11.5.1.48.1.1.10.1.7,HP-ICF-MLD-MIB::hpicfMldPortSrcFilterMode,INTEGER,read-only,,current,include(1):exclude(2),The Value indicates whether the port state is  include(1) or exclude(2).
.1.3.6.1.4.1.11.2.14.11.5.1.48.1.1.11,HP-ICF-MLD-MIB::hpicfMldMcastExcludeGroupJoinsCount,Integer32,read-only,,current,,Number of multicast groups in Exclude mode.
.1.3.6.1.4.1.11.2.14.11.5.1.48.1.1.12,HP-ICF-MLD-MIB::hpicfMldMcastIncludeGroupJoinsCount,Integer32,read-only,,current,, Number of multicast groups in Include mode.
.1.3.6.1.4.1.11.2.14.11.5.1.48.1.1.13,HP-ICF-MLD-MIB::hpicfMldMcastPortFastLearn,OCTET,read-write,,current,,List of ports on which the fast learn feature is enabled
.1.3.6.1.4.1.11.2.14.11.5.1.48.1.1.14,HP-ICF-MLD-MIB::hpicfMldGroupPortCacheTable,,not-accessible,,current,,This table contains information about the MLD port configurations on this switch.
.1.3.6.1.4.1.11.2.14.11.5.1.48.1.1.14.1,HP-ICF-MLD-MIB::hpicfMldGroupPortCacheEntry,,not-accessible,hpicfMldGroupPortCacheIfIndex:hpicfMldGroupPortCacheGroupAddress:hpicfMldGroupPortCachePortIndex,current,,The information associated with each MLD port configuration.
.1.3.6.1.4.1.11.2.14.11.5.1.48.1.1.14.1.1,HP-ICF-MLD-MIB::hpicfMldGroupPortCacheIfIndex,Integer32,not-accessible,,current,,The internetwork-layer interface value of the interface for which MLD is enabled and for which this group exists.
.1.3.6.1.4.1.11.2.14.11.5.1.48.1.1.14.1.2,HP-ICF-MLD-MIB::hpicfMldGroupPortCacheGroupAddress,OCTET,not-accessible,,current,,The IPv6 multicast group address for which this entry contains information.
.1.3.6.1.4.1.11.2.14.11.5.1.48.1.1.14.1.3,HP-ICF-MLD-MIB::hpicfMldGroupPortCachePortIndex,Integer32,not-accessible,,current,,The ifIndex value which uniquely identifies a row in the Interfaces Table for a port or trunk.
.1.3.6.1.4.1.11.2.14.11.5.1.48.1.1.14.1.4,HP-ICF-MLD-MIB::hpicfMldGroupPortCacheExpiryTime,TimeTicks,read-only,,current,,The minimum amount of time remaining before this entry will be aged out.
.1.3.6.1.4.1.11.2.14.11.5.1.48.1.1.14.1.5,HP-ICF-MLD-MIB::hpicfMldGroupPortCacheUpTime,TimeTicks,read-only,,current,,The time elapsed since this entry was created.
.1.3.6.1.4.1.11.2.14.11.5.1.48.1.1.14.1.6,HP-ICF-MLD-MIB::hpicfMldGroupPortCacheVersion1Timer,TimeTicks,read-only,,current,,The time remaining until the local router will assume that there are no longer any MLD version 1 members on this port.
.1.3.6.1.4.1.11.2.14.11.5.1.48.1.1.14.1.7,HP-ICF-MLD-MIB::hpicfMldGroupPortCacheFilterTimer,TimeTicks,read-only,,current,,The time remaining before the port in EXCLUDE state expires and transitions to INCLUDE mode.
.1.3.6.1.4.1.11.2.14.11.5.1.48.1.1.14.1.8,HP-ICF-MLD-MIB::hpicfMldGroupPortCacheFilterMode,INTEGER,read-only,,current,include(1):exclude(2),The Value indicates whether the port state is  include(1) or exclude(2).
.1.3.6.1.4.1.11.2.14.11.5.1.48.1.1.14.1.9,HP-ICF-MLD-MIB::hpicfMldGroupPortCacheExcludeSrcCount,Counter32,read-only,,current,,Current number of sources excluded on this port.
.1.3.6.1.4.1.11.2.14.11.5.1.48.1.1.14.1.10,HP-ICF-MLD-MIB::hpicfMldGroupPortCacheRequestedSrcCount,Counter32,read-only,,current,,Current number of sources requested on this port.
.1.3.6.1.4.1.11.2.14.11.5.1.48.2,HP-ICF-MLD-MIB::hpicfMldConformance,,,,,,
.1.3.6.1.4.1.11.2.14.11.5.1.48.2.1,HP-ICF-MLD-MIB::hpicfMldGroups,,,,,,
.1.3.6.1.4.1.11.2.14.11.5.1.48.2.1.1,HP-ICF-MLD-MIB::hpicfMldBaseGroup,,,,,,A collection of objects to support basic MLD  configuration information on HP routers.
.1.3.6.1.4.1.11.2.14.11.5.1.48.2.1.2,HP-ICF-MLD-MIB::hpicfMldIfGroup,,,,,,A collection of objects that extends objects defined in mldInterfaceTable and used to support management of  interfaces with MLD enabled.
.1.3.6.1.4.1.11.2.14.11.5.1.48.2.1.3,HP-ICF-MLD-MIB::hpicfMldCacheGroup,,,,,,A collection of objects that extends objects defined in mldCacheTable and used to support management of  interfaces with MLD enabled.
.1.3.6.1.4.1.11.2.14.11.5.1.48.2.1.4,HP-ICF-MLD-MIB::hpicfMldPortGroup,,,,,,A collection of objects that extends objects defined in mldInterfaceTable and used to support management of  interfaces with MLD enabled.
.1.3.6.1.4.1.11.2.14.11.5.1.48.2.1.5,HP-ICF-MLD-MIB::hpicfMldFilteredGroupPortCacheGroup,,,,,,A collection of objects that extends objects defined in hpicfMldCacheTable which are of type filtered. These are used to support management of interfaces with MLD enabled.
.1.3.6.1.4.1.11.2.14.11.5.1.48.2.1.6,HP-ICF-MLD-MIB::hpicfMldBaseGroupV2,,,,,,A collection of objects to support basic MLD  configuration information on HP routers.
.1.3.6.1.4.1.11.2.14.11.5.1.48.2.1.7,HP-ICF-MLD-MIB::hpicfMldIfGroupV2,,,,,,A collection of objects that extends objects defined in mldInterfaceTable and used to support management of  interfaces with MLD enabled.
.1.3.6.1.4.1.11.2.14.11.5.1.48.2.1.8,HP-ICF-MLD-MIB::hpicfMldCacheGroupV2,,,,,,A collection of objects that extends objects defined in mldCacheTable and used to support management of  interfaces with MLD enabled.
.1.3.6.1.4.1.11.2.14.11.5.1.48.2.1.9,HP-ICF-MLD-MIB::hpicfMldSrcListGroup,,,,,,A collection of objects that extends objects defined in Mgmd standard MIB table mgmdRouterSrcListTable for Ipv6 type.
.1.3.6.1.4.1.11.2.14.11.5.1.48.2.1.10,HP-ICF-MLD-MIB::hpicfMldPortSrcGroup,,,,,,A collection of objects containing information about the MLD PortSrc configurations on this switch
.1.3.6.1.4.1.11.2.14.11.5.1.48.2.1.11,HP-ICF-MLD-MIB::hpicfMldGroupPortCacheGroup,,,,,,A collection of objects that extends objects defined in hpicfMldCacheTable. These are used to support  management of interfaces with MLD enabled.
.1.3.6.1.4.1.11.2.14.11.5.1.48.2.2,HP-ICF-MLD-MIB::hpicfMldCompliances,,,,,,
.1.3.6.1.4.1.11.2.14.11.5.1.48.2.2.1,HP-ICF-MLD-MIB::hpicfMldMIBCompliance,,,,,,The compliance statement for HP routers running MLD and implementing the HP-ICF-MLD MIB.
.1.3.6.1.4.1.11.2.14.11.5.1.48.2.2.2,HP-ICF-MLD-MIB::hpicfMldMIBComplianceV2,,,,,,The compliance statement for HP routers running MLD and implementing the HP-ICF-MLD MIB.
.1.3.6.1.4.1.11.2.14.11.5.1.50,HP-ICF-OID::hpicfDhcpv6Relay,,,,,,
.1.3.6.1.4.1.11.2.14.11.5.1.50.1,HP-ICF-DHCPv6-RELAY::hpicfDhcpv6RelayAdminStatus,INTEGER,read-write,,current,enabled(1):disabled(2),The global administrative status of the DHCPv6 relay. This object indicates if the DHCPv6 relay has been administratively enabled or disabled on the device.
.1.3.6.1.4.1.11.2.14.11.5.1.50.2,HP-ICF-DHCPv6-RELAY::hpicfDhcpRelayHelperAddressTable,,not-accessible,,current,,Table of helper addresses configurable on the DHCP relay.
.1.3.6.1.4.1.11.2.14.11.5.1.50.2.1,HP-ICF-DHCPv6-RELAY::hpicfDhcpRelayHelperAddressEntry,,not-accessible,ifIndex:hpicfDhcpRelayHelperAddressType:hpicfDhcpRelayHelperAddress,current,,An instance of a DHCP relay helper address.
.1.3.6.1.4.1.11.2.14.11.5.1.50.2.1.1,HP-ICF-DHCPv6-RELAY::hpicfDhcpRelayHelperAddressType,INTEGER,not-accessible,,current,unknown(0):ipv4(1):ipv6(2):ipv4z(3):ipv6z(4):dns(16),Type of the helper address being configured.
.1.3.6.1.4.1.11.2.14.11.5.1.50.2.1.2,HP-ICF-DHCPv6-RELAY::hpicfDhcpRelayHelperAddress,OCTET,not-accessible,,current,,The helper address being configured.The address type of this object is specified in hpicfDhcpRelayHelperAddressType
.1.3.6.1.4.1.11.2.14.11.5.1.50.2.1.3,HP-ICF-DHCPv6-RELAY::hpicfDhcpRelayHelperAddressEgressInterface,Integer32,read-create,,current,,The egress interface through which the DHCP relay must send out its packets if the helper address is a multicast address. In case of a unicast helper address, this object must be set to zero.By default, this value is zero
.1.3.6.1.4.1.11.2.14.11.5.1.50.2.1.4,HP-ICF-DHCPv6-RELAY::hpicfDhcpRelayHelperAddressStatus,INTEGER,read-create,,current,active(1):notInService(2):notReady(3):createAndGo(4):createAndWait(5):destroy(6),The row status of this helper address instance.
.1.3.6.1.4.1.11.2.14.11.5.1.50.3,HP-ICF-DHCPv6-RELAY::hpicfDhcpRelayPerInterfaceStatsTable,,not-accessible,,current,,Table of DHCP relay statistics per Vlan.
.1.3.6.1.4.1.11.2.14.11.5.1.50.3.1,HP-ICF-DHCPv6-RELAY::hpicfDhcpRelayPerInterfaceStatsEntry,,not-accessible,ifIndex,current,,An instance of the per Vlan statistics table
.1.3.6.1.4.1.11.2.14.11.5.1.50.3.1.1,HP-ICF-DHCPv6-RELAY::hpicfDhcpRelayPerInterfaceClientPktsRecd,Counter32,read-only,,current,,The number of valid DHCPv6 client requests received on  this interface.
.1.3.6.1.4.1.11.2.14.11.5.1.50.3.1.2,HP-ICF-DHCPv6-RELAY::hpicfDhcpRelayPerInterfaceClientPktsDropped,Counter32,read-only,,current,,The number of DHCPv6 client requests that were dropped at ingress.
.1.3.6.1.4.1.11.2.14.11.5.1.50.3.1.3,HP-ICF-DHCPv6-RELAY::hpicfDhcpRelayPerInterfaceClientPktsXmitFail,Counter32,read-only,,current,,The number of DHCPv6 client requests that failed to get relayed  at egress.
.1.3.6.1.4.1.11.2.14.11.5.1.50.3.1.4,HP-ICF-DHCPv6-RELAY::hpicfDhcpRelayPerInterfaceServerPktsRecd,Counter32,read-only,,current,,The number of valid DHCPv6 server responses received on this  interface.
.1.3.6.1.4.1.11.2.14.11.5.1.50.3.1.5,HP-ICF-DHCPv6-RELAY::hpicfDhcpRelayPerInterfaceServerPktsDropped,Counter32,read-only,,current,,The number of DHCPv6 server responses dropped on this interface  at ingress.
.1.3.6.1.4.1.11.2.14.11.5.1.50.3.1.6,HP-ICF-DHCPv6-RELAY::hpicfDhcpRelayPerInterfaceServerPktsXmitFail,Counter32,read-only,,current,,The number of DHCPv6 server responses that failed to get relayed  at egress.
.1.3.6.1.4.1.11.2.14.11.5.1.50.4,HP-ICF-DHCPv6-RELAY::hpicfDhcpRelayConformance,,,,,,
.1.3.6.1.4.1.11.2.14.11.5.1.50.4.1,HP-ICF-DHCPv6-RELAY::hpicfDhcpRelayGroups,,,,,,
.1.3.6.1.4.1.11.2.14.11.5.1.50.4.1.1,HP-ICF-DHCPv6-RELAY::hpicfDhcpRelayConfigGroup,,,,,,A collection of objects related to configuration for DHCP relay
.1.3.6.1.4.1.11.2.14.11.5.1.50.4.1.2,HP-ICF-DHCPv6-RELAY::hpicfDhcpRelayStatsGroup,,,,,,A collection of objects providing statistics about the DHCP relay
.1.3.6.1.4.1.11.2.14.11.5.1.50.4.2,HP-ICF-DHCPv6-RELAY::hpicfDhcpRelayCompliances,,,,,,
.1.3.6.1.4.1.11.2.14.11.5.1.50.4.2.1,HP-ICF-DHCPv6-RELAY::hpicfDhcpRelayCompliance,,,,,,The compliance statement for SNMP entities which implement the hpicfDhcpv6Relay MIB with support for writable objects. Such an implementation can be both monitored and configured via SNMP.
.1.3.6.1.4.1.11.2.14.11.5.1.51,HP-ICF-OID::hpicfScriptMIB,,,,,,
.1.3.6.1.4.1.11.2.14.11.5.1.53,HP-ICF-OID::hpicfUSBPortMIB,,,,,,
.1.3.6.1.4.1.11.2.14.11.5.1.53.0,HP-ICF-USBPORT::hpicfUSBPortNotifications,,,,,,
.1.3.6.1.4.1.11.2.14.11.5.1.53.0.1,HP-ICF-USBPORT::hpicfUSBPortEnabled,,,,,,An hpicfUSBPortEnabled notification signifies that the SNMP entity, acting in an agent role, has detected that the hpicfUSBPortStatus object has transitioned into the  'enabled' state.
.1.3.6.1.4.1.11.2.14.11.5.1.53.0.2,HP-ICF-USBPORT::hpicfUSBPortDisabled,,,,,,An hpicfUSBPortDisabled notification signifies that the SNMP entity, acting in an agent role, has detected that the hpicfUSBPortStatus object has transitioned into the  'disabled' state.
.1.3.6.1.4.1.11.2.14.11.5.1.53.1,HP-ICF-USBPORT::hpicfUSBPortConfig,,,,,,
.1.3.6.1.4.1.11.2.14.11.5.1.53.1.1,HP-ICF-USBPORT::hpicfUSBPortStatus,INTEGER,read-write,,current,notPresent(0):enabled(1):disabled(2),hpicfUSBPortStatus control whether or not the USB port is enabled. notPresent(0) - USBPort is not present  enabled(1) - USBPort Enabled. disabled(2) - USBPort Disabled. 
.1.3.6.1.4.1.11.2.14.11.5.1.53.1.2,HP-ICF-USBPORT::hpicfUSBPortZeroPowerStatus,INTEGER,read-only,,current,powerUnavailable(0):powerOff(1):powerOn(2),hpicfUSBPortZeroPowerStatus indicates if  the USB port zero power is on or off. powerUnavailable(0) - USBPort power reading is  unavailable.  powerOff(1) - USBPort power is off.  powerOn(2) - USBPort power is on. 
.1.3.6.1.4.1.11.2.14.11.5.1.53.2,HP-ICF-USBPORT::hpicfUSBPortConformance,,,,,,
.1.3.6.1.4.1.11.2.14.11.5.1.53.2.1,HP-ICF-USBPORT::hpicfUSBPortGroups,,,,,,
.1.3.6.1.4.1.11.2.14.11.5.1.53.2.1.1,HP-ICF-USBPORT::hpicfUSBPortBaseGroup,,,,,,A mandatory group with an object to enable or disable the USB port.
.1.3.6.1.4.1.11.2.14.11.5.1.53.2.1.2,HP-ICF-USBPORT::hpicfUSBPortNotificationGroup,,,,,,The hpicfUSBPort MIB Notification Group.
.1.3.6.1.4.1.11.2.14.11.5.1.53.2.2,HP-ICF-USBPORT::hpicfUSBPortCompliances,,,,,,
.1.3.6.1.4.1.11.2.14.11.5.1.53.2.2.1,HP-ICF-USBPORT::hpicfUSBPortCompliance,,,,,,Compliance statement for HP ICF USBPort configuration
.1.3.6.1.4.1.11.2.14.11.5.1.54,HP-ICF-OID::hpicfFanMIB,,,,,,
.1.3.6.1.4.1.11.2.14.11.5.1.54.1,FAN-MIB::hpicfFanScalars,,,,,,
.1.3.6.1.4.1.11.2.14.11.5.1.54.1.1,FAN-MIB::hpicfFanUserPrefAirflowDir,INTEGER,read-write,,current,portToPower(1):powerToPort(2),The user preferred fan airflow direction. The direction could be powerToPort or portToPower. The actual fan direction has to be  changed manually, this will be used to indicate to the user when when the actual fan airflow direction is different from the user preferred airflow direction.
.1.3.6.1.4.1.11.2.14.11.5.1.54.2,FAN-MIB::hpicfEntityFan,,,,,,
.1.3.6.1.4.1.11.2.14.11.5.1.54.2.1,FAN-MIB::hpicfFanTable,,not-accessible,,current,,This table contains one row for every fan in the switch entity.
.1.3.6.1.4.1.11.2.14.11.5.1.54.2.1.1,FAN-MIB::hpicfFanEntry,,not-accessible,hpicfFanIndex,current,,Information about fan entity table.
.1.3.6.1.4.1.11.2.14.11.5.1.54.2.1.1.1,FAN-MIB::hpicfFanIndex,Unsigned32,not-accessible,,current,,The index that is used to access the switch fan entry table.
.1.3.6.1.4.1.11.2.14.11.5.1.54.2.1.1.2,FAN-MIB::hpicfFanTray,Integer32,read-only,,current,,The tray number in which the fan is docked.
.1.3.6.1.4.1.11.2.14.11.5.1.54.2.1.1.3,FAN-MIB::hpicfFanType,INTEGER,read-only,,current,unknown(0):mm(1):fm(2):im(3):ps(4):rollup(5):maxtype(6),An indication of the vendor-specific fan.
.1.3.6.1.4.1.11.2.14.11.5.1.54.2.1.1.4,FAN-MIB::hpicfFanState,INTEGER,read-only,,current,failed(0):removed(1):off(2):underspeed(3):overspeed(4):ok(5):maxstate(6),The current state of the fan.
.1.3.6.1.4.1.11.2.14.11.5.1.54.2.1.1.5,FAN-MIB::hpicfFanRecovering,Integer32,read-only,,current,,An indication that the switch fan entity is faulty. Before declaring a fan to be good after a failure is  detected, the same good indication must happen five (5) times in a row. A failure indication is always TRUE, while a good indication could be FALSE, hence this parameter is  used to count the repeated good indications before  declaring the fan to be good 
.1.3.6.1.4.1.11.2.14.11.5.1.54.2.1.1.6,FAN-MIB::hpicfFanNumFailures,Counter32,read-only,,current,,The number of times the fan has failed.
.1.3.6.1.4.1.11.2.14.11.5.1.54.2.1.1.7,FAN-MIB::hpicfFanAirflowDirection,INTEGER,read-only,,current,portToPower(1):powerToPort(2),Indication of the fan air flow direction, either from Power supply towards the port or from the port towards the power supply.
.1.3.6.1.4.1.11.2.14.11.5.1.54.3,FAN-MIB::hpicfFanConformance,,,,,,
.1.3.6.1.4.1.11.2.14.11.5.1.54.3.1,FAN-MIB::hpicfFanCompliance,,,,,,
.1.3.6.1.4.1.11.2.14.11.5.1.54.3.1.1,FAN-MIB::hpicfDcFanCompliance,,,,,,The compliance statement for entries which implement  the FAN MIB.
.1.3.6.1.4.1.11.2.14.11.5.1.54.3.2,FAN-MIB::hpicfFanGroups,,,,,,
.1.3.6.1.4.1.11.2.14.11.5.1.54.3.2.1,FAN-MIB::hpicfFanScalarsGroup,,,,,,Basic Scalars required in FAN MIB implementation.
.1.3.6.1.4.1.11.2.14.11.5.1.54.3.2.2,FAN-MIB::hpicfFanGroup,,,,,,FAN MIB parameters 
.1.3.6.1.4.1.11.2.14.11.5.1.55,HP-ICF-OID::hpicfPsMIB,,,,,,
.1.3.6.1.4.1.11.2.14.11.5.1.55.1,POWERSUPPLY-MIB::hpicfEntityPs,,,,,,
.1.3.6.1.4.1.11.2.14.11.5.1.55.1.1,POWERSUPPLY-MIB::hpicfPsTable,,not-accessible,,current,,This table contains one row per switch power supply entity.
.1.3.6.1.4.1.11.2.14.11.5.1.55.1.1.1,POWERSUPPLY-MIB::hpicfPsEntry,,not-accessible,hpicfPsBayNum,current,,Information about the power supply physical entity table.
.1.3.6.1.4.1.11.2.14.11.5.1.55.1.1.1.1,POWERSUPPLY-MIB::hpicfPsBayNum,Unsigned32,not-accessible,,current,,The index of switch power supply entity.
.1.3.6.1.4.1.11.2.14.11.5.1.55.1.1.1.2,POWERSUPPLY-MIB::hpicfPsState,INTEGER,read-only,,current,psNotPresent(1):psNotPlugged(2):psPowered(3):psFailed(4):psPermFailure(5):psMax(6),The physical state of the switch power supply entity.
.1.3.6.1.4.1.11.2.14.11.5.1.55.1.1.1.3,POWERSUPPLY-MIB::hpicfPsFailures,Counter32,read-only,,current,,Number of times power supply has failed.
.1.3.6.1.4.1.11.2.14.11.5.1.55.1.1.1.4,POWERSUPPLY-MIB::hpicfPsTemp,Integer32,read-only,,current,,The temperature of the power supply in Celsius
.1.3.6.1.4.1.11.2.14.11.5.1.55.1.1.1.5,POWERSUPPLY-MIB::hpicfPsVoltageInfo,OCTET,read-only,,current,,The voltage info and max current of power supply. e.g. AC 120V/220V. 
.1.3.6.1.4.1.11.2.14.11.5.1.55.1.1.1.6,POWERSUPPLY-MIB::hpicfPsWattageCur,Integer32,read-only,,current,,The present power supply wattage information
.1.3.6.1.4.1.11.2.14.11.5.1.55.1.1.1.7,POWERSUPPLY-MIB::hpicfPsWattageMax,Integer32,read-only,,current,,The maximum wattage of the power supply.
.1.3.6.1.4.1.11.2.14.11.5.1.55.1.1.1.8,POWERSUPPLY-MIB::hpicfPsLastCall,Counter32,read-only,,current,,The number of seconds since the switch power supply is up.
.1.3.6.1.4.1.11.2.14.11.5.1.55.2,POWERSUPPLY-MIB::hpicfPsConformance,,,,,,
.1.3.6.1.4.1.11.2.14.11.5.1.55.2.1,POWERSUPPLY-MIB::hpicfPsCompliance,,,,,,
.1.3.6.1.4.1.11.2.14.11.5.1.55.2.1.1,POWERSUPPLY-MIB::hpicfDcPsCompliance,,,,,,The compliance statement for entries which implement the POWER SUPPLY MIB.
.1.3.6.1.4.1.11.2.14.11.5.1.55.2.2,POWERSUPPLY-MIB::hpicfPsGroups,,,,,,
.1.3.6.1.4.1.11.2.14.11.5.1.55.2.2.1,POWERSUPPLY-MIB::hpicfPsGroup,,,,,,POWER SUPPLY parameters 
.1.3.6.1.4.1.11.2.14.11.5.1.56,HP-ICF-OID::hpicfSavepowerMIB,,,,,,
.1.3.6.1.4.1.11.2.14.11.5.1.56.1,SAVEPOWER-MIB::hpicfSavepowerScalars,,,,,,
.1.3.6.1.4.1.11.2.14.11.5.1.56.1.1,SAVEPOWER-MIB::hpicfSavepowerMaxBlocks,Unsigned32,read-only,,current,,The maximum number of Power blocks in the switch which are associated to a group of ports to power on/off. The number of power blocks and ports associated with a block are platform dependent.
.1.3.6.1.4.1.11.2.14.11.5.1.56.1.2,SAVEPOWER-MIB::hpicfSavepowerEnabledPorts,Unsigned32,read-only,,current,,This indicates the total number of ports in the switch that are powered off.
.1.3.6.1.4.1.11.2.14.11.5.1.56.1.3,SAVEPOWER-MIB::hpicfSavepowerLEDScalars,,,,,,
.1.3.6.1.4.1.11.2.14.11.5.1.56.1.3.1,SAVEPOWER-MIB::hpicfSavePowerLEDOffAlarmStartTime,OCTET,read-write,,current,,This is the scheduled time at which the all the switch
.1.3.6.1.4.1.11.2.14.11.5.1.56.1.3.2,SAVEPOWER-MIB::hpicfSavePowerLEDOffAlarmDuration,Unsigned32,read-write,,current,,This is the duration of the alarm time during which the
.1.3.6.1.4.1.11.2.14.11.5.1.56.1.3.3,SAVEPOWER-MIB::hpicfSavePowerLEDOffAlarmRecur,INTEGER,read-write,,current,true(1):false(2),The truth value used to indicate if the timer for LED
.1.3.6.1.4.1.11.2.14.11.5.1.56.2,SAVEPOWER-MIB::hpicfEntitySavepower,,,,,,
.1.3.6.1.4.1.11.2.14.11.5.1.56.2.1,SAVEPOWER-MIB::hpicfSavepowerTable,,not-accessible,,current,,This table contains one row for every power block that controls a group of physical ports.
.1.3.6.1.4.1.11.2.14.11.5.1.56.2.1.1,SAVEPOWER-MIB::hpicfSavepowerEntry,,not-accessible,hpicfSavepowerBlockID,current,,Information about Savepower table.
.1.3.6.1.4.1.11.2.14.11.5.1.56.2.1.1.1,SAVEPOWER-MIB::hpicfSavepowerBlockID,Unsigned32,not-accessible,,current,,The index that is used to access the power block entry table.
.1.3.6.1.4.1.11.2.14.11.5.1.56.2.1.1.2,SAVEPOWER-MIB::hpicfSavepowerControl,INTEGER,read-write,,current,powerOn(1):powerOff(2),This indicates if the power to the block is powerOn (1) or powerOff (2).
.1.3.6.1.4.1.11.2.14.11.5.1.56.2.1.1.3,SAVEPOWER-MIB::hpicfSavepowerBlockPorts,OCTET,read-only,,current,,This indicates the port-range associated to the  hpisfSavepowerBlockID.
.1.3.6.1.4.1.11.2.14.11.5.1.56.2.2,SAVEPOWER-MIB::hpicfSavepowerGreenFeaturesTable,,not-accessible,,current,,This table contains a row for different entities and
.1.3.6.1.4.1.11.2.14.11.5.1.56.2.2.1,SAVEPOWER-MIB::hpicfSavepowerGreenFeaturesEntry,,not-accessible,entPhysicalIndex,current,,Information about SavepowerGreenFeatures table.
.1.3.6.1.4.1.11.2.14.11.5.1.56.2.2.1.1,SAVEPOWER-MIB::hpicfSavepowerEntityPowerAdminStatus,INTEGER,read-write,,current,true(1):false(2),The truth value indicates the configured status of the
.1.3.6.1.4.1.11.2.14.11.5.1.56.2.2.1.2,SAVEPOWER-MIB::hpicfSavepowerEntityPowerOperStatus,INTEGER,read-only,,current,powerOn(1):powerOff(2),This indicates the operational status of the entity as powerOn(1)
.1.3.6.1.4.1.11.2.14.11.5.1.56.2.2.1.3,SAVEPOWER-MIB::hpicfSavepowerEntityLEDAdminStatus,INTEGER,read-write,,current,true(1):false(2), The truth value indicates the configured status of the entity's
.1.3.6.1.4.1.11.2.14.11.5.1.56.2.2.1.4,SAVEPOWER-MIB::hpicfSavepowerEntityLEDOperStatus,INTEGER,read-only,,current,powerOn(1):powerOff(2), This indicates if the operational status of the entity's LED power
.1.3.6.1.4.1.11.2.14.11.5.1.56.2.3,SAVEPOWER-MIB::hpicfSavepowerPHYTable,,not-accessible,,current,, This table contains a row for every port for which
.1.3.6.1.4.1.11.2.14.11.5.1.56.2.3.1,SAVEPOWER-MIB::hpicfSavepowerPHYEntry,,not-accessible,hpicfSavepowerSlotNum:hpicfSavepowerPortNum,current,,Information about PHY power status for ports.
.1.3.6.1.4.1.11.2.14.11.5.1.56.2.3.1.1,SAVEPOWER-MIB::hpicfSavepowerSlotNum,Unsigned32,not-accessible,,current,,This value serves as an index to identify the slot no. for the PHY.
.1.3.6.1.4.1.11.2.14.11.5.1.56.2.3.1.2,SAVEPOWER-MIB::hpicfSavepowerPortNum,Unsigned32,not-accessible,,current,,This value serves as an index to identify the port no. for the PHY.
.1.3.6.1.4.1.11.2.14.11.5.1.56.2.3.1.3,SAVEPOWER-MIB::hpicfSavepowerPHYAdminStatus,INTEGER,read-write,,current,true(1):false(2),The truth value indicates the configured status of the auto low power mode for the PHY.
.1.3.6.1.4.1.11.2.14.11.5.1.56.2.3.1.4,SAVEPOWER-MIB::hpicfSavepowerPHYOperStatus,INTEGER,read-only,,current,powerOn(1):powerOff(2),This indicates if the operational status of the PHY power is auto low power mode i.e. powerOff(2) or normal power mode i.e. or powerOn(1).
.1.3.6.1.4.1.11.2.14.11.5.1.56.2.4,SAVEPOWER-MIB::hpicfSavepowerEntPHYTable,,not-accessible,,current,,This table contains a row for every member in a  stack setup or for a standalone device or for  every slot in a chassis, for which the PHY will  be put to auto low power mode or normal power mode  and contains the admin status and operational  status of the PHY .
.1.3.6.1.4.1.11.2.14.11.5.1.56.2.4.1,SAVEPOWER-MIB::hpicfSavepowerEntPHYEntry,,not-accessible,entPhysicalIndex,current,,Information about PHY power status.
.1.3.6.1.4.1.11.2.14.11.5.1.56.2.4.1.1,SAVEPOWER-MIB::hpicfSavepowerEntPHYAdminStatus,INTEGER,read-write,,current,true(1):false(2),The truth value indicates the configured status  of the auto low power mode for the PHY. True  indicates PHY is in low power mode.
.1.3.6.1.4.1.11.2.14.11.5.1.56.2.4.1.2,SAVEPOWER-MIB::hpicfSavepowerEntPHYOperStatus,INTEGER,read-only,,current,powerOn(1):powerOff(2),This indicates if the operational status of the  PHY power is auto low power mode i.e. powerOff(2) or normal power mode i.e. powerOn(1).
.1.3.6.1.4.1.11.2.14.11.5.1.56.3,SAVEPOWER-MIB::hpicfSavepowerConformance,,,,,,
.1.3.6.1.4.1.11.2.14.11.5.1.56.3.1,SAVEPOWER-MIB::hpicfSavepowerCompliance,,,,,,
.1.3.6.1.4.1.11.2.14.11.5.1.56.3.1.1,SAVEPOWER-MIB::hpicfSavepowerComplianceInfo,,,,,,The compliance statement for entries which implement  the SAVEPOWER MIB.
.1.3.6.1.4.1.11.2.14.11.5.1.56.3.2,SAVEPOWER-MIB::hpicfSavepowerGroups,,,,,,
.1.3.6.1.4.1.11.2.14.11.5.1.56.3.2.1,SAVEPOWER-MIB::hpicfSavepowerScalarsGroup,,,,,,Basic Scalars required in SAVEPOWER MIB implementation.
.1.3.6.1.4.1.11.2.14.11.5.1.56.3.2.2,SAVEPOWER-MIB::hpicfSavepowerLEDScalarsGroup,,,,,,Scalars required for LED turn off feature.
.1.3.6.1.4.1.11.2.14.11.5.1.56.3.2.3,SAVEPOWER-MIB::hpicfSavepowerGreenFeaturesGroup,,,,,,SAVEPOWER Green Features parameters
.1.3.6.1.4.1.11.2.14.11.5.1.56.3.2.4,SAVEPOWER-MIB::hpicfSavepowerPHYGroup,,,,,,SAVEPOWER MIB parameters 
.1.3.6.1.4.1.11.2.14.11.5.1.56.3.2.5,SAVEPOWER-MIB::hpicfSavepowerGroup,,,,,,SAVEPOWER MIB parameters 
.1.3.6.1.4.1.11.2.14.11.5.1.56.4,SAVEPOWER-MIB::hpicfPHYConformance,,,,,,
.1.3.6.1.4.1.11.2.14.11.5.1.56.4.1,SAVEPOWER-MIB::hpicfPHYCompliance,,,,,,
.1.3.6.1.4.1.11.2.14.11.5.1.56.4.1.1,SAVEPOWER-MIB::hpicfPHYComplianceInfo,,,,,,The compliance statement for entries which implement  the PORT LOW POWER.
.1.3.6.1.4.1.11.2.14.11.5.1.56.4.2,SAVEPOWER-MIB::hpicfPHYGroups,,,,,,
.1.3.6.1.4.1.11.2.14.11.5.1.56.4.2.1,SAVEPOWER-MIB::hpicfSavepowerEntPHYGroup,,,,,,PORT-LOW-POWER MIB parameters 
.1.3.6.1.4.1.11.2.14.11.5.1.57,HP-ICF-OID::hpicfDhcpClient,,,,,,
.1.3.6.1.4.1.11.2.14.11.5.1.57.1,HP-ICF-DHCPCLIENT-MIB::hpicfDhcpClientOptions,,,,,,
.1.3.6.1.4.1.11.2.14.11.5.1.57.1.1,HP-ICF-DHCPCLIENT-MIB::hpicfDhcpClientVendorSpecOptionStatus,INTEGER,read-write,,current,enable(1):disable(2),This flag indicates whether DHCP vendor specific configurations are enabled for this interface or not. Setting this flag to 'enabled' (the default) results in sending 'Vendor Class Identifier'(VCI) to DHCP server and requesting vendor specific configurations from DHCP servers for this interface. Refer to RFC 2132 for more details. Setting this flag to 'disabled' results in not sending VCI to DHCP server and not requesting vendor specific configurations from DHCP servers.
.1.3.6.1.4.1.11.2.14.11.5.1.57.1.2,HP-ICF-DHCPCLIENT-MIB::hpicfDhcpClientHostNameOption,INTEGER,read-write,,current,enable(1):disable(2),This object enables/disables DHCP option 12 that allows for sending the system's hostname in DHCP packets. By default this object is set to be disabled. Setting this flag to 'enabled' results in the  inclusion of system hostname in DHCP packets.
.1.3.6.1.4.1.11.2.14.11.5.1.57.1.3,HP-ICF-DHCPCLIENT-MIB::hpicfDhcpClientImageFileUpdate,INTEGER,read-write,,current,enabled(1):disabled(2),This object facilitates enabling or disabling of the image file update feature through DHCP.  Setting this object to 1 enables this feature and setting it to 2 disables this feature. This MIB object can be set to 1 only if  hpicfDhcpClientVendorSpecOptionStatus has already been set to 1.  By default, hpicfDhcpClientImageFileUpdate is set to 1. When this feature is enabled, the Auto-TFTP settings will be disabled.
.1.3.6.1.4.1.11.2.14.11.5.1.57.1.4,HP-ICF-DHCPCLIENT-MIB::hpicfDhcpClientintfTable,,not-accessible,,current,,DHCP client's interface level configuration table. Common to both v4 and v6 DHCP clients.
.1.3.6.1.4.1.11.2.14.11.5.1.57.1.4.1,HP-ICF-DHCPCLIENT-MIB::hpicfDhcpClientintfEntry,,not-accessible,ifIndex,current,,A row in hpicfDhcpClientintfTable.
.1.3.6.1.4.1.11.2.14.11.5.1.57.1.4.1.1,HP-ICF-DHCPCLIENT-MIB::hpicfDhcpClientAuthType,INTEGER,read-write,,current,none(0):md5(1),The authentication type specified for an interface.
.1.3.6.1.4.1.11.2.14.11.5.1.57.1.4.1.2,HP-ICF-DHCPCLIENT-MIB::hpicfDhcpClientKeyChain,OCTET,read-write,,current,,KMS chain name specified for an interface.
.1.3.6.1.4.1.11.2.14.11.5.1.57.1.5,HP-ICF-DHCPCLIENT-MIB::hpicfDhcpClientStatisticsTable,,not-accessible,,current,,DHCP client's interface level statistics.
.1.3.6.1.4.1.11.2.14.11.5.1.57.1.5.1,HP-ICF-DHCPCLIENT-MIB::hpicfDhcpClientStatisticsEntry,,not-accessible,ifIndex:hpicfIPVersion,current,,A row in hpicfDhcpClientStatisticsTable
.1.3.6.1.4.1.11.2.14.11.5.1.57.1.5.1.1,HP-ICF-DHCPCLIENT-MIB::hpicfIPVersion,INTEGER,not-accessible,,current,unknown(0):ipv4(1):ipv6(2), IP version of this row.
.1.3.6.1.4.1.11.2.14.11.5.1.57.1.5.1.2,HP-ICF-DHCPCLIENT-MIB::hpicfDhcpClientPktTx,Counter32,read-only,,current,,Number of DHCP packets transmitted.
.1.3.6.1.4.1.11.2.14.11.5.1.57.1.5.1.3,HP-ICF-DHCPCLIENT-MIB::hpicfDhcpClientPktRx,Counter32,read-only,,current,,Number of DHCP packets received.
.1.3.6.1.4.1.11.2.14.11.5.1.57.1.5.1.4,HP-ICF-DHCPCLIENT-MIB::hpicfDhcpClientPktAuthFailed,Counter32,read-only,,current,,Number of DHCP packets dropped due to authentication failure.
.1.3.6.1.4.1.11.2.14.11.5.1.57.2,HP-ICF-DHCPCLIENT-MIB::hpicfDhcpClientOptionsConf,,,,,,
.1.3.6.1.4.1.11.2.14.11.5.1.57.2.1,HP-ICF-DHCPCLIENT-MIB::hpicfDhcpClientGroups,,,,,,
.1.3.6.1.4.1.11.2.14.11.5.1.57.2.1.1,HP-ICF-DHCPCLIENT-MIB::hpicfDhcpClientOptionsGroup,,,,,,A mandatory group with a set of DHCP client's option  object(s).
.1.3.6.1.4.1.11.2.14.11.5.1.57.2.1.2,HP-ICF-DHCPCLIENT-MIB::hpicfDhcpClientVendorSpecOptionsGroup,,,,,,A mandatory group with a set of DHCP vendor specific option object(s).
.1.3.6.1.4.1.11.2.14.11.5.1.57.2.1.3,HP-ICF-DHCPCLIENT-MIB::hpicfDhcpClientAuthGroup,,,,,,A mandatory group with a set of DHCP Client Authentication object(s).
.1.3.6.1.4.1.11.2.14.11.5.1.57.2.2,HP-ICF-DHCPCLIENT-MIB::hpicfDhcpClientCompliances,,,,,,
.1.3.6.1.4.1.11.2.14.11.5.1.57.2.2.1,HP-ICF-DHCPCLIENT-MIB::hpicfDhcpClientCompliance,,,,,,The compliance statement for DHCP Client implementation.
.1.3.6.1.4.1.11.2.14.11.5.1.57.2.2.2,HP-ICF-DHCPCLIENT-MIB::hpicfDhcpClientVendorSpecOptionsCompliance,,,,,,The compliance statement for DHCP client implementation.
.1.3.6.1.4.1.11.2.14.11.5.1.57.2.2.3,HP-ICF-DHCPCLIENT-MIB::hpicfDhcpClientAuthCompliance,,,,,,The compliance statement for DHCP Authentication implementation.
.1.3.6.1.4.1.11.2.14.11.5.1.58,HP-ICF-OID::hpicfOobmMIB,,,,,,
.1.3.6.1.4.1.11.2.14.11.5.1.58.0,HP-ICF-OOBM-MIB::hpicfOobmNotifications,,,,,,
.1.3.6.1.4.1.11.2.14.11.5.1.58.1,HP-ICF-OOBM-MIB::hpicfOobmObjects,,,,,,
.1.3.6.1.4.1.11.2.14.11.5.1.58.1.1,HP-ICF-OOBM-MIB::hpicfOobmScalars,,,,,,
.1.3.6.1.4.1.11.2.14.11.5.1.58.1.1.1,HP-ICF-OOBM-MIB::hpicfOobmStatus,INTEGER,read-write,,current,enable(1):disable(2),Global Oobm (Out Of Band Management) status. By default oobm is globally enabled. On the stackable device, when stacking is enabled, this enables oobm on all the  member switches.
.1.3.6.1.4.1.11.2.14.11.5.1.58.1.2,HP-ICF-OOBM-MIB::hpicfOobmServers,,,,,,
.1.3.6.1.4.1.11.2.14.11.5.1.58.1.2.1,HP-ICF-OOBM-MIB::hpicfOobmServerTable,,not-accessible,,current,,This table contains one row for every server  application in the switch entity. On a stackable device, when stacking is enabled,  the server entry is created on all the  member switches.
.1.3.6.1.4.1.11.2.14.11.5.1.58.1.2.1.1,HP-ICF-OOBM-MIB::hpicfOobmServerEntry,,not-accessible,hpicfOobmServerType,current,,Information about Server Application table.
.1.3.6.1.4.1.11.2.14.11.5.1.58.1.2.1.1.1,HP-ICF-OOBM-MIB::hpicfOobmServerType,INTEGER,not-accessible,,current,telnet(1):ssh(2):tftp(3):http(4):snmp(5),The index that is used to access the switch server application table.
.1.3.6.1.4.1.11.2.14.11.5.1.58.1.2.1.1.2,HP-ICF-OOBM-MIB::hpicfOobmServerListenMode,INTEGER,read-write,,current,oobm(1):data(2):both(3),The current state of the server application. Default value is Oobm. Depending on the interface on which  server application is running, incoming queries will be listened by the switch.
.1.3.6.1.4.1.11.2.14.11.5.1.58.1.3,HP-ICF-OOBM-MIB::hpicfOobmSnmpTargetAddrIsOobm,,,,,,
.1.3.6.1.4.1.11.2.14.11.5.1.58.1.3.1,HP-ICF-OOBM-MIB::hpicfSnmpTargetAddrIsOobmTable,,not-accessible,,current,,Adds an HpicfSnmpTargetAddrIsOobmEntry to snmpTargetAddrTable.
.1.3.6.1.4.1.11.2.14.11.5.1.58.1.3.1.1,HP-ICF-OOBM-MIB::hpicfSnmpTargetAddrIsOobmEntry,,not-accessible,,current,,Adds an HpicfSnmpTargetAddrIsOobmEntry to snmpTargetAddrTable.
.1.3.6.1.4.1.11.2.14.11.5.1.58.1.3.1.1.1,HP-ICF-OOBM-MIB::hpicfSnmpTargetAddrIsOobm,INTEGER,read-create,,current,true(1):false(2),This object indicates if the target is reachable  over OOBM (Out OF Band Management) interface or  not. This mib object will be applicable only if  there is a physical OOBM port on the device.
.1.3.6.1.4.1.11.2.14.11.5.1.58.1.4,HP-ICF-OOBM-MIB::hpicfOobmDefGateway,,,,,,
.1.3.6.1.4.1.11.2.14.11.5.1.58.1.4.1,HP-ICF-OOBM-MIB::hpicfOobmDefGatewayTable,,not-accessible,,current,,This table contains one row for every default
.1.3.6.1.4.1.11.2.14.11.5.1.58.1.4.1.1,HP-ICF-OOBM-MIB::hpicfOobmDefGatewayEntry,,not-accessible,hpicfOobmDefGatewayType,current,,Information about Default Gateway table.
.1.3.6.1.4.1.11.2.14.11.5.1.58.1.4.1.1.1,HP-ICF-OOBM-MIB::hpicfOobmDefGatewayType,INTEGER,not-accessible,,current,unknown(0):ipv4(1):ipv6(2):ipv4z(3):ipv6z(4):dns(16),Address type of default gateway configured for OOBM Interface.
.1.3.6.1.4.1.11.2.14.11.5.1.58.1.4.1.1.2,HP-ICF-OOBM-MIB::hpicfOobmDefGatewayAddr,OCTET,read-write,,current,,The IP Address of the default gateway configured for OOBM interface.
.1.3.6.1.4.1.11.2.14.11.5.1.58.1.5,HP-ICF-OOBM-MIB::hpicfOobmStackMembers,,,,,,
.1.3.6.1.4.1.11.2.14.11.5.1.58.1.5.3,HP-ICF-OOBM-MIB::hpicfOobmMemberDefGatewayTable,,not-accessible,,current,,This table contains one row for every default gateway configured for OOBM Interface and  for each member of the stack.
.1.3.6.1.4.1.11.2.14.11.5.1.58.1.5.3.1,HP-ICF-OOBM-MIB::hpicfOobmMemberDefGatewayEntry,,not-accessible,ifIndex:hpicfOobmMemberDefGatewayType,current,,Information about Default Gateway table.
.1.3.6.1.4.1.11.2.14.11.5.1.58.1.5.3.1.1,HP-ICF-OOBM-MIB::hpicfOobmMemberDefGatewayType,INTEGER,not-accessible,,current,unknown(0):ipv4(1):ipv6(2):ipv4z(3):ipv6z(4):dns(16),Address type of default gateway configured for OOBM Interface.
.1.3.6.1.4.1.11.2.14.11.5.1.58.1.5.3.1.2,HP-ICF-OOBM-MIB::hpicfOobmMemberDefGatewayAddr,OCTET,read-write,,current,,The IP Address of the default gateway configured for OOBM interface.
.1.3.6.1.4.1.11.2.14.11.5.1.58.3,HP-ICF-OOBM-MIB::hpicfOobmConformance,,,,,,
.1.3.6.1.4.1.11.2.14.11.5.1.58.3.1,HP-ICF-OOBM-MIB::hpicfOobmCompliance,,,,,,
.1.3.6.1.4.1.11.2.14.11.5.1.58.3.1.1,HP-ICF-OOBM-MIB::hpicfOobmMibCompliance,,,,,,The compliance statement for entries which implement the Oobm application servers MIB.
.1.3.6.1.4.1.11.2.14.11.5.1.58.3.2,HP-ICF-OOBM-MIB::hpicfOobmGroups,,,,,,
.1.3.6.1.4.1.11.2.14.11.5.1.58.3.2.1,HP-ICF-OOBM-MIB::hpicfOobmScalarsGroup,,,,,,Basic Scalars required in Oobm MIB implementation.
.1.3.6.1.4.1.11.2.14.11.5.1.58.3.2.2,HP-ICF-OOBM-MIB::hpicfOobmServersGroup,,,,,,Oobm Server MIB parameters.
.1.3.6.1.4.1.11.2.14.11.5.1.58.3.2.3,HP-ICF-OOBM-MIB::hpicfSnmpTargetAddrIsOobmGroup,,,,,,A group of objects to add an  HpicfSnmpTargetAddrIsOobmEntry to  snmpTargetAddrTable.
.1.3.6.1.4.1.11.2.14.11.5.1.58.3.2.4,HP-ICF-OOBM-MIB::hpicfOobmDefGatewayGroup,,,,,,OOBM Default Gateway MIB parameters
.1.3.6.1.4.1.11.2.14.11.5.1.58.3.2.5,HP-ICF-OOBM-MIB::hpicfOobmMemberGroup,,,,,,OOBM stack member parameters
.1.3.6.1.4.1.11.2.14.11.5.1.59,HP-ICF-OID::hpSwitchImage,,,,,,
.1.3.6.1.4.1.11.2.14.11.5.1.59.1,HP-SWITCH-IMAGE-MIB::hpSwitchImageObject,,,,,,
.1.3.6.1.4.1.11.2.14.11.5.1.59.1.1,HP-SWITCH-IMAGE-MIB::hpSwitchDefaultBoot,INTEGER,read-only,,current,primary(1):secondary(2),This object describes the default flash boot image. It may be either primary or secondary image.
.1.3.6.1.4.1.11.2.14.11.5.1.59.1.2,HP-SWITCH-IMAGE-MIB::hpSwitchBootRomVersion,OCTET,read-only,,current,,This object describes version details of Monitor Rom Console.
.1.3.6.1.4.1.11.2.14.11.5.1.59.1.3,HP-SWITCH-IMAGE-MIB::hpSwitchFlashImageTable,,not-accessible,,current,,Each entry of this table describes information like size of image, build date, image version and build number for the images that are present in the flash. Build number is accessible only in debug build.
.1.3.6.1.4.1.11.2.14.11.5.1.59.1.3.1,HP-SWITCH-IMAGE-MIB::hpSwitchFlashImageEntry,,not-accessible,hpSwitchFlashImageType,current,,Each entry describes information like size of image, build date, version and build  number. Build number is accessible only in debug build.
.1.3.6.1.4.1.11.2.14.11.5.1.59.1.3.1.1,HP-SWITCH-IMAGE-MIB::hpSwitchFlashImageType,INTEGER,not-accessible,,current,primary(1):secondary(2),This object describes flash image type. It may be  primary or secondary image.
.1.3.6.1.4.1.11.2.14.11.5.1.59.1.3.1.2,HP-SWITCH-IMAGE-MIB::hpSwitchFlashImageSize,Unsigned32,read-only,,current,,This object describes the image size in bytes.
.1.3.6.1.4.1.11.2.14.11.5.1.59.1.3.1.3,HP-SWITCH-IMAGE-MIB::hpSwitchFlashImageBuildDate,OCTET,read-only,,current,,This object describes the date on which this image is built.
.1.3.6.1.4.1.11.2.14.11.5.1.59.1.3.1.4,HP-SWITCH-IMAGE-MIB::hpSwitchFlashImageVersion,OCTET,read-only,,current,,This object describes the version number.
.1.3.6.1.4.1.11.2.14.11.5.1.59.1.3.1.5,HP-SWITCH-IMAGE-MIB::hpSwitchFlashImageBuildNumber,OCTET,read-only,,current,,This object describes the build number. This object is accessible only in debug build.
.1.3.6.1.4.1.11.2.14.11.5.1.59.1.4,HP-SWITCH-IMAGE-MIB::hpSwitchMgmtModuleVersionTable,,not-accessible,,current,,Each entry of this table describes  information like status, image directory path, build date, image version, image build number, boot-image type, build options and watchdog status of the running software version for management modules. In switches other than 8200, only one management module is present. In 8200 switches, two management modules are  present.
.1.3.6.1.4.1.11.2.14.11.5.1.59.1.4.1,HP-SWITCH-IMAGE-MIB::hpSwitchMgmtModuleVersionEntry,,not-accessible,hpSwitchMgmtModuleID,current,,This entry describes information like status, image directory, build date, image version, image build number, boot-image type, build options and watchdog status of the running software version for management modules.
.1.3.6.1.4.1.11.2.14.11.5.1.59.1.4.1.1,HP-SWITCH-IMAGE-MIB::hpSwitchMgmtModuleID,INTEGER,not-accessible,,current,mgmtModule1(1):mgmtModule2(2),This module ID object is used to uniquely identify the entry in the table.
.1.3.6.1.4.1.11.2.14.11.5.1.59.1.4.1.2,HP-SWITCH-IMAGE-MIB::hpSwitchMgmtModuleStatus,INTEGER,read-only,,current,unknown(1):active(2):redundancyDisabled(3):standby(4):offline(5):failed(6),This object describes the status of the running software version for management module. This status can be active, disabled, standby, offline, failed or  unknown.
.1.3.6.1.4.1.11.2.14.11.5.1.59.1.4.1.3,HP-SWITCH-IMAGE-MIB::hpSwitchMgmtModuleDirectory,OCTET,read-only,,current,,This object describes the directory path of the running software version.
.1.3.6.1.4.1.11.2.14.11.5.1.59.1.4.1.4,HP-SWITCH-IMAGE-MIB::hpSwitchMgmtModuleDate,OCTET,read-only,,current,,This object describes the build date of the running software version.
.1.3.6.1.4.1.11.2.14.11.5.1.59.1.4.1.5,HP-SWITCH-IMAGE-MIB::hpSwitchMgmtModuleVersion,OCTET,read-only,,current,,This object describes the version number of the running software version.
.1.3.6.1.4.1.11.2.14.11.5.1.59.1.4.1.6,HP-SWITCH-IMAGE-MIB::hpSwitchMgmtModuleBuildNumber,OCTET,read-only,,current,,This object describes the build number of the running software version. This object is  accessible only in debug build.
.1.3.6.1.4.1.11.2.14.11.5.1.59.1.4.1.7,HP-SWITCH-IMAGE-MIB::hpSwitchMgmtModuleBootImage,INTEGER,read-only,,current,unknown(1):primary(2):secondary(3),This object gives the image type in which switch is booted up recently. It may be primary or  secondary image. It gives unknown if neither primary nor secondary image is present.
.1.3.6.1.4.1.11.2.14.11.5.1.59.1.4.1.8,HP-SWITCH-IMAGE-MIB::hpSwitchMgmtModuleBuildOptions,INTEGER,read-only,,current,unknown(1):qa(2):hubmode(3):debug(4):asicLogging(5),This object describes the build options of the running software version.
.1.3.6.1.4.1.11.2.14.11.5.1.59.1.4.1.9,HP-SWITCH-IMAGE-MIB::hpSwitchMgmtModuleWatchDog,INTEGER,read-only,,current,unknown(1):enabled(2):disabled(3),This object describes whether watchdog is enabled or disabled for the running software version. This gives unknown if not available.
.1.3.6.1.4.1.11.2.14.11.5.1.59.2,HP-SWITCH-IMAGE-MIB::hpSwitchImageConformance,,,,,,
.1.3.6.1.4.1.11.2.14.11.5.1.59.2.1,HP-SWITCH-IMAGE-MIB::hpSwitchImageGroups,,,,,,
.1.3.6.1.4.1.11.2.14.11.5.1.59.2.1.1,HP-SWITCH-IMAGE-MIB::hpSwitchFlashImagesGroup,,,,,,A mandatory group which is required to  give the details like image size, image  build date, image version, default boot image for the images in the flash. This also gives version of monitor rom console.
.1.3.6.1.4.1.11.2.14.11.5.1.59.2.1.2,HP-SWITCH-IMAGE-MIB::hpSwitchMgmtModuleGroup,,,,,,A mandatory group which is required to give the details like status, boot  directory-path, image build date, image  version and boot-image of the running software version for the management modules.
.1.3.6.1.4.1.11.2.14.11.5.1.59.2.1.3,HP-SWITCH-IMAGE-MIB::hpSwitchBuildGroup,,,,,,This optional group is accessible only in debug build.
.1.3.6.1.4.1.11.2.14.11.5.1.59.2.2,HP-SWITCH-IMAGE-MIB::hpSwitchImageCompliances,,,,,,
.1.3.6.1.4.1.11.2.14.11.5.1.59.2.2.1,HP-SWITCH-IMAGE-MIB::hpSwitchImageCompliance,,,,,,The compliance statement is for hpSwitchFlashImagesGroup, hpSwitchMgmtModuleGroup and hpSwitchBuildGroup.
.1.3.6.1.4.1.11.2.14.11.5.1.60,HP-ICF-OID::hpicfDosFilterMib,,,,,,
.1.3.6.1.4.1.11.2.14.11.5.1.60.1,HP-ICF-DOS-FILTER-MIB::hpicfDosFilterObjects,,,,,,
.1.3.6.1.4.1.11.2.14.11.5.1.60.1.1,HP-ICF-DOS-FILTER-MIB::hpicfDosFilterConfig,INTEGER,read-write,,current,enabled(1):disabled(2),This object enables Denial of Service (DoS) packet filtering. When enabled, the device will automatically discard packets that match certain DoS attack profiles.
.1.3.6.1.4.1.11.2.14.11.5.1.60.2,HP-ICF-DOS-FILTER-MIB::hpicfDosFilterConformance,,,,,,
.1.3.6.1.4.1.11.2.14.11.5.1.60.2.1,HP-ICF-DOS-FILTER-MIB::hpicfDosFilterCompliances,,,,,,
.1.3.6.1.4.1.11.2.14.11.5.1.60.2.1.1,HP-ICF-DOS-FILTER-MIB::hpicfDosFilterCompliance,,,,,,Describes the requirements for conformance to the DosFilter MIB.
.1.3.6.1.4.1.11.2.14.11.5.1.60.2.2,HP-ICF-DOS-FILTER-MIB::hpicfDosFilterGroups,,,,,,
.1.3.6.1.4.1.11.2.14.11.5.1.60.2.2.1,HP-ICF-DOS-FILTER-MIB::hpicfDosFilterGroup,,,,,,DosFilter objects.
.1.3.6.1.4.1.11.2.14.11.5.1.61,HP-ICF-OID::hpicfGppcv2MIB,,,,,,
.1.3.6.1.4.1.11.2.14.11.5.1.61.1,HP-ICF-GPPCV2-MIB::hpicfGppcv2Conformance,,,,,,
.1.3.6.1.4.1.11.2.14.11.5.1.61.1.1,HP-ICF-GPPCV2-MIB::hpicfGppcv2MIBCompliances,,,,,,
.1.3.6.1.4.1.11.2.14.11.5.1.61.1.1.1,HP-ICF-GPPCV2-MIB::hpicfGppcv2MIBCompliance,,,,,,The compliance statement for HP routers implementing the HP-ICF-Gppcv2-MIB.
.1.3.6.1.4.1.11.2.14.11.5.1.61.1.2,HP-ICF-GPPCV2-MIB::hpicfGppcv2MIBGroups,,,,,,
.1.3.6.1.4.1.11.2.14.11.5.1.61.1.2.1,HP-ICF-GPPCV2-MIB::hpicfGppcv2Group,,,,,,A collection of HP proprietary objects to support Gppcv2.
.1.3.6.1.4.1.11.2.14.11.5.1.61.2,HP-ICF-GPPCV2-MIB::hpicfGppcv2AppControlTable,,not-accessible,,current,,The application control table. This keeps track of the applications that use Gppcv2, the policies set by these applications, and information on where/when/how to apply these policies. This information includes the interfaces and VLANs where the policy should be applied, whether it should be applied at ingress or egress, and when it should expire. The following limitation is in place: there can be  no more than one policy action per SNMP pdu.
.1.3.6.1.4.1.11.2.14.11.5.1.61.2.1,HP-ICF-GPPCV2-MIB::hpicfGppcv2AppControlEntry,,not-accessible,hpicfGppcv2AcAppName:hpicfGppcv2AcAppInstance:hpicfGppcv2AcPolicyType:hpicfGppcv2AcPolicyName,current,,An entry in the application control table.
.1.3.6.1.4.1.11.2.14.11.5.1.61.2.1.1,HP-ICF-GPPCV2-MIB::hpicfGppcv2AcAppName,OCTET,not-accessible,,current,,Name of the application that last modified this row. All applications of the same type should use the same name and should use different instance identifiers to identify themselves uniquely. This is a printable string up to 16 bytes in size.
.1.3.6.1.4.1.11.2.14.11.5.1.61.2.1.2,HP-ICF-GPPCV2-MIB::hpicfGppcv2AcAppInstance,OCTET,not-accessible,,current,,Instance identifier of the application. This is used to distinguish between different instances of the same application. This is a printable string up to 16 bytes in size.
.1.3.6.1.4.1.11.2.14.11.5.1.61.2.1.3,HP-ICF-GPPCV2-MIB::hpicfGppcv2AcPolicyType,INTEGER,not-accessible,,current,aclIpv4(1):aclIpv6(2):classifierClassIpv4(3):classifierClassIpv6(4):classifierPolicy(5):connectionRateFilterIpv4(6),Type of the policy, used to distinguish policies with the same name.
.1.3.6.1.4.1.11.2.14.11.5.1.61.2.1.4,HP-ICF-GPPCV2-MIB::hpicfGppcv2AcPolicyName,OCTET,not-accessible,,current,,Name of the policy. Each policy is uniquely identified by its name. It is possible to apply the same policy in different manners to different interfaces and VLANs. This is a printable string up to 64 characters in size and case sensitive.
.1.3.6.1.4.1.11.2.14.11.5.1.61.2.1.5,HP-ICF-GPPCV2-MIB::hpicfGppcv2AcIngressIfList,OCTET,read-create,,current,,List of interfaces to which this policy applies at ingress.
.1.3.6.1.4.1.11.2.14.11.5.1.61.2.1.6,HP-ICF-GPPCV2-MIB::hpicfGppcv2AcIngressVIDList,OCTET,read-create,,current,,A string of octets containing one bit per Vlan-Id for VLANS with vlan index values of 0 through 4096. The first octet corresponds to VLANs with vlan index values of 0 through 7, the second octet to VLANs 8 through 15, etc. The most significant bit of each octet corresponds to the lowest vlan index value in that octet. For each VLAN that this policy should apply to at ingress, the corresponding bit is set to '1'.
.1.3.6.1.4.1.11.2.14.11.5.1.61.2.1.7,HP-ICF-GPPCV2-MIB::hpicfGppcv2AcEgressIfList,OCTET,read-create,,current,,List of interfaces to which this policy applies at egress.
.1.3.6.1.4.1.11.2.14.11.5.1.61.2.1.8,HP-ICF-GPPCV2-MIB::hpicfGppcv2AcEgressVIDList,OCTET,read-create,,current,,A string of octets containing one bit per Vlan-Id for VLANS with vlan index values of 0 through 4096. The first octet corresponds to VLANs with vlan index values of 0 through 7, the second octet to VLANs 8 through 15, etc. The most significant bit of each octet corresponds to the lowest vlan index value in that octet. For each VLAN that this policy should apply to at egress, the corresponding bit is set to '1'.
.1.3.6.1.4.1.11.2.14.11.5.1.61.2.1.9,HP-ICF-GPPCV2-MIB::hpicfGppcv2AcVIDList,OCTET,read-create,,current,,A string of octets containing one bit per Vlan-Id for VLANS with vlan index values of 0 through 4096. The first octet corresponds to VLANs with vlan index values of 0 through 7, the second octet to VLANs 8 through 15, etc. The most significant bit of each octet corresponds to the lowest vlan index value in that octet. For each VLAN that this policy should apply to as a VLAN ACL, the corresponding bit is set to '1'.
.1.3.6.1.4.1.11.2.14.11.5.1.61.2.1.10,HP-ICF-GPPCV2-MIB::hpicfGppcv2AcExpPolicy,INTEGER,read-create,,current,permanent(1),Expiration policy. This indicates whether a policy should expire automatically. 'permanent' means a policy should never expire automatically.
.1.3.6.1.4.1.11.2.14.11.5.1.61.2.1.11,HP-ICF-GPPCV2-MIB::hpicfGppcv2AcExpString,OCTET,read-create,,current,,Expiration string. This is used in conjunction with hpicfGppcv2AcExpPolicy to indicate when a policy should expire automatically. The value stored in this object is interpreted differently for different expiration policies. When the expiration policy is 'permanent', this value is ignored.
.1.3.6.1.4.1.11.2.14.11.5.1.61.2.1.12,HP-ICF-GPPCV2-MIB::hpicfGppcv2AcLastErrorCode,INTEGER,read-only,,current,noError(0):gppcv2GenericError(1):gppcv2LengthError(2):gppcv2NameError(3):gppcv2ParameterError(4):gppcv2NotImplemented(5):gppcv2MallocError(6):gppcv2TooManyApps(7):gppcv2TooManyPolicies(8):gppcv2AlreadyReserved(9):gppcv2EntryExists(10):gppcv2PlatformError(11):gppcv2AppUsingPolicy(12):gppcv2InvalidPolicyType(13):gppcv2NotReserved(14):gppcv2NoPolicy(15):gppcv2PolicyNotActive(16):gppcv2PolicyHasRules(17):gppcv2RuleExists(18):gppcv2ReleaseRules(19):gppcv2ReleaseAppCtrlEntry(20):gppcv2CfgError(50):gppcv2AceCreateError(70):gppcv2AceConflictingRuleError(71):gppcv2AceDuplicateError(72):gppcv2AceDuplicateSequenceNumError(73):gppcv2AceCfgLimitReachedError(74):gppcv2AceNotFoundError(75):gppcv2AclDuplcateNameError(76):gppcv2AclMaxSequenceNumError(77):gppcv2AclMgmtVlanConflictError(78):gppcv2AclApplyError(79):gppcv2AclCreateError(80):gppcv2AclCfgLimitReachedError(81):gppcv2AclNotFoundError(82):gppcv2AclNotAppliedVlanError(83):gppcv2AclNotAppliedPortError(84):gppcv2InvalidTypeForCrfError(85):gppcv2AclResequenceLimitError(86):gppcv2ClassMaxSequenceNumError(87):gppcv2ClassNotFoundError(88):gppcv2ClassCreateError(89):gppcv2ClassEntryCfgLimitReachedError(90):gppcv2ClassListCfgLimitReachedError(91):gppcv2ClassDuplicateNameError(92):gppcv2ClassEntryAddError(93):gppcv2ClassEntryNotFoundError(94):gppcv2ClassConflictingRuleError(95):gppcv2PolicyNotFoundError(96):gppcv2PolicyNameConflictError(97):gppcv2PolicyNotAppliedError(98):gppcv2PolicyCreateError(99):gppcv2PolicyAddClassError(100):gppcv2PolicyDeleteClassError(101):gppcv2PolicyClassNotFoundError(102):gppcv2PolicyDeleteError(103):gppcv2PolicyApplyError(104):gppcv2PolicyIsAppliedCannotDeleteError(105):gppcv2PolicyDuplicateClassError(106):gppcv2PolicyClassifiedVlanOnVlanError(107):gppcv2PolicyCfgLimitReachedError(108):gppcv2PolicyApplyDetailedError(109),Error code of the last error that occurred. A non-zero value indicates that the last operation performed by this instance of the application on the named policy did not succeed. A detailed description of the error is available in hpicfGppcv2AcLastErrorString.
.1.3.6.1.4.1.11.2.14.11.5.1.61.2.1.13,HP-ICF-GPPCV2-MIB::hpicfGppcv2AcLastErrorString,OCTET,read-only,,current,,Description of the last error that occurred. This is a printable ASCII string that describes the error in some detail.
.1.3.6.1.4.1.11.2.14.11.5.1.61.2.1.14,HP-ICF-GPPCV2-MIB::hpicfGppcv2AcRowAdminStatus,INTEGER,read-create,,current,enabled(1):disabled(2),Administrative status of this row. The named policy in this row is applied to the interfaces and/or VLANs by this instance of the application only when the administrative status is enabled. This is the main on/off switch for the row. The row status must be active for this switch to have an effect.
.1.3.6.1.4.1.11.2.14.11.5.1.61.2.1.15,HP-ICF-GPPCV2-MIB::hpicfGppcv2AcRowStatus,INTEGER,read-create,,current,active(1):notInService(2):notReady(3):createAndGo(4):createAndWait(5):destroy(6),Status of this row. Row status must be active, and the admin status (see hpicfGppcv2AcRowAdminStatus) must be enabled for this row to be activated.
.1.3.6.1.4.1.11.2.14.11.5.1.61.2.1.16,HP-ICF-GPPCV2-MIB::hpicfGppcv2AcIngressTunnelList,OCTET,read-create,,current,,A string of octets containing one bit per tunnel-id for tunnels with tunnel values of 0 through 2047. The first octet corresponds to tunnel with values  of 0 through 7, the second octet with values from 8 through 15, etc. The most significant bit of each octet corresponds to the lowest tunnel value in that octet. For each tunnel that this policy should apply to at ingress, the corresponding bit is set to '1'.
.1.3.6.1.4.1.11.2.14.11.5.1.61.2.1.17,HP-ICF-GPPCV2-MIB::hpicfGppcv2AcEgressTunnelList,OCTET,read-create,,current,,A string of octets containing one bit per tunnel-id for tunnels with tunnel values of 0 through 2047. The first octet corresponds to tunnel with values  of 0 through 7, the second octet with values from 8 through 15, etc. The most significant bit of each octet corresponds to the lowest tunnel value in that octet. For each tunnel that this policy should apply to at egress, the corresponding bit is set to '1'.
.1.3.6.1.4.1.11.2.14.11.5.1.61.3,HP-ICF-GPPCV2-MIB::hpicfGppcv2NamedPolicyTable,,not-accessible,,current,,The named policy table. This table lists the name and type of all policies that are applied via  Gppcv2. The following limitation is in place: there can be  no more than one policy action per SNMP pdu.
.1.3.6.1.4.1.11.2.14.11.5.1.61.3.1,HP-ICF-GPPCV2-MIB::hpicfGppcv2NamedPolicyEntry,,not-accessible,hpicfGppcv2NpPolicyName:hpicfGppcv2NpPolicyType,current,,An entry in the named policy table.
.1.3.6.1.4.1.11.2.14.11.5.1.61.3.1.1,HP-ICF-GPPCV2-MIB::hpicfGppcv2NpPolicyName,OCTET,not-accessible,,current,,Name of the policy. The name of a policy is its unique identification. It is a printable string in ASCII characters. It can be up to 64 characters in length and it case sensitive
.1.3.6.1.4.1.11.2.14.11.5.1.61.3.1.2,HP-ICF-GPPCV2-MIB::hpicfGppcv2NpPolicyType,INTEGER,not-accessible,,current,aclIpv4(1):aclIpv6(2):classifierClassIpv4(3):classifierClassIpv6(4):classifierPolicy(5):connectionRateFilterIpv4(6),Type of the policy as defined in the  TEXTUAL-CONVENTION
.1.3.6.1.4.1.11.2.14.11.5.1.61.3.1.3,HP-ICF-GPPCV2-MIB::hpicfGppcv2NpSubType,INTEGER,read-create,,current,subtypeNone(1):aclStandard(2):aclExtended(3):aclConnectionRateFilter(4):aclIdm(5):aclExtendedIpv6(6):policyQos(7):policyMirror(8):policyPbr(9),Subtype of the policy. A subtype of 'aclStandard' indicates that the  policy is a standard Access Control List. The policy  is used to permit or deny packets based on source  IPv4 address and subnet only. A subtype of 'aclExtended' indicates that the  policy is an extended Access Control List, an ACL  that filters packets based on source IPv4 address  and subnet, destination IPv4 address and subnet, and  protocol amongst other packet information. A subtype of 'aclConnectionRateFilter'  indicates that the policy is a  connection-rate-filter Access Control List, similar to an ACL-extended. A subtype of 'aclIdm' indicates that the policy is a Identity Driven Management ACL used to filter  traffic based on the source MAC address, protocol  and destination IP information of a packet. A subtype of 'aclExtendedIpv6' indicates that the  policy is an extended Access Control List, an ACL  that filters packets based on source IPv6 address  and subnet, destination IPv6 address and subnet, and  protocol amongst other packet information. A subype of 'policyQos' indicates that the  policy will perform Quality of Service actions on  packets that match statements in the policy's  classes. A subtype of 'policyMirror' indicates that  the policy will perform mirror actions on packets  that match statements in the policy's classes. A subtype of 'policyPbr' indicates that the  policy will perform Policy Based Routing actions  on packets that match statements in the policy's  classes.
.1.3.6.1.4.1.11.2.14.11.5.1.61.3.1.4,HP-ICF-GPPCV2-MIB::hpicfGppcv2NpReseqStart,Integer32,read-create,,current,,Specifies the starting sequence number for resequence.
.1.3.6.1.4.1.11.2.14.11.5.1.61.3.1.5,HP-ICF-GPPCV2-MIB::hpicfGppcv2NpReseqIncr,Integer32,read-create,,current,,Specifies the increment value for resequence.
.1.3.6.1.4.1.11.2.14.11.5.1.61.3.1.6,HP-ICF-GPPCV2-MIB::hpicfGppcv2NpLastSeqNo,Integer32,read-only,,current,,Contains the highest valid sequence number for this policy entry at any point of time.
.1.3.6.1.4.1.11.2.14.11.5.1.61.3.1.7,HP-ICF-GPPCV2-MIB::hpicfGppcv2NpLastErrorCode,INTEGER,read-only,,current,noError(0):gppcv2GenericError(1):gppcv2LengthError(2):gppcv2NameError(3):gppcv2ParameterError(4):gppcv2NotImplemented(5):gppcv2MallocError(6):gppcv2TooManyApps(7):gppcv2TooManyPolicies(8):gppcv2AlreadyReserved(9):gppcv2EntryExists(10):gppcv2PlatformError(11):gppcv2AppUsingPolicy(12):gppcv2InvalidPolicyType(13):gppcv2NotReserved(14):gppcv2NoPolicy(15):gppcv2PolicyNotActive(16):gppcv2PolicyHasRules(17):gppcv2RuleExists(18):gppcv2ReleaseRules(19):gppcv2ReleaseAppCtrlEntry(20):gppcv2CfgError(50):gppcv2AceCreateError(70):gppcv2AceConflictingRuleError(71):gppcv2AceDuplicateError(72):gppcv2AceDuplicateSequenceNumError(73):gppcv2AceCfgLimitReachedError(74):gppcv2AceNotFoundError(75):gppcv2AclDuplcateNameError(76):gppcv2AclMaxSequenceNumError(77):gppcv2AclMgmtVlanConflictError(78):gppcv2AclApplyError(79):gppcv2AclCreateError(80):gppcv2AclCfgLimitReachedError(81):gppcv2AclNotFoundError(82):gppcv2AclNotAppliedVlanError(83):gppcv2AclNotAppliedPortError(84):gppcv2InvalidTypeForCrfError(85):gppcv2AclResequenceLimitError(86):gppcv2ClassMaxSequenceNumError(87):gppcv2ClassNotFoundError(88):gppcv2ClassCreateError(89):gppcv2ClassEntryCfgLimitReachedError(90):gppcv2ClassListCfgLimitReachedError(91):gppcv2ClassDuplicateNameError(92):gppcv2ClassEntryAddError(93):gppcv2ClassEntryNotFoundError(94):gppcv2ClassConflictingRuleError(95):gppcv2PolicyNotFoundError(96):gppcv2PolicyNameConflictError(97):gppcv2PolicyNotAppliedError(98):gppcv2PolicyCreateError(99):gppcv2PolicyAddClassError(100):gppcv2PolicyDeleteClassError(101):gppcv2PolicyClassNotFoundError(102):gppcv2PolicyDeleteError(103):gppcv2PolicyApplyError(104):gppcv2PolicyIsAppliedCannotDeleteError(105):gppcv2PolicyDuplicateClassError(106):gppcv2PolicyClassifiedVlanOnVlanError(107):gppcv2PolicyCfgLimitReachedError(108):gppcv2PolicyApplyDetailedError(109),Error code of the last error that occurred. A non-zero value indicates that the last operation performed on the ruleEntry of this policy did not succeed. A detailed description of the error is available in hpicfGppcv2NpLastErrorString.
.1.3.6.1.4.1.11.2.14.11.5.1.61.3.1.8,HP-ICF-GPPCV2-MIB::hpicfGppcv2NpLastErrorString,OCTET,read-only,,current,,Description of the last error that occurred. This is a printable ASCII string that describes the error in some detail.
.1.3.6.1.4.1.11.2.14.11.5.1.61.3.1.9,HP-ICF-GPPCV2-MIB::hpicfGppcv2NpRowStatus,INTEGER,read-create,,current,active(1):notInService(2):notReady(3):createAndGo(4):createAndWait(5):destroy(6),Status of this row. The named policy must be active before rules can be added to it or removed from it. A newly created policy will remain in notReady state until it is given a valid policy type (see hpicfGppcv2NpPolicyType). A row in the named policy table can not be deleted if the named policy is referenced by a row in the application control table. The application control entries that refer to this row must be deleted before this row can be deleted.
.1.3.6.1.4.1.11.2.14.11.5.1.61.4,HP-ICF-GPPCV2-MIB::hpicfGppcv2PolicyRulesTable,,not-accessible,,current,,The policy rules table. A policy can consist of multiple rules. All of the rules of a policy are listed in this table. Each rule consists of a string and a numeric identifier - the rule id. The following limitation is in place: there can be  no more than one policy action per SNMP pdu.
.1.3.6.1.4.1.11.2.14.11.5.1.61.4.1,HP-ICF-GPPCV2-MIB::hpicfGppcv2PolicyRulesEntry,,not-accessible,hpicfGppcv2NpPolicyName:hpicfGppcv2NpPolicyType:hpicfGppcv2PrRuleId,current,,An entry in the policy rules table.
.1.3.6.1.4.1.11.2.14.11.5.1.61.4.1.1,HP-ICF-GPPCV2-MIB::hpicfGppcv2PrRuleId,Integer32,not-accessible,,current,,Numeric identifier of the rule. The rules in a policy are processed sequentially in increasing order of their rule ids. These numeric ids are generated by the application that creates the policy. Rules within a policy have unique rule IDs.
.1.3.6.1.4.1.11.2.14.11.5.1.61.4.1.2,HP-ICF-GPPCV2-MIB::hpicfGppcv2PrPolicyRule,OCTET,read-create,,current,,Rule string. This is a string that represents one rule in the policy. A policy can consist of one or many rules. For details on the format of the rule string please  see: http://h17007.www1.hp.com
.1.3.6.1.4.1.11.2.14.11.5.1.61.4.1.3,HP-ICF-GPPCV2-MIB::hpicfGppcv2PrRemark,OCTET,read-create,,current,,Remark string. This is a descriptive  text string for a policy rule entry. For details on the format of the rule string please  see: http://h17007.www1.hp.com
.1.3.6.1.4.1.11.2.14.11.5.1.61.4.1.4,HP-ICF-GPPCV2-MIB::hpicfGppcv2PrRowStatus,INTEGER,read-create,,current,active(1):notInService(2):notReady(3):createAndGo(4):createAndWait(5):destroy(6),Status of this row. A rule must have an active row status in order to take effect. Only active rules within the named policy are applied when an application applies the policy. It is possible to use this row status as an on/off switch for enabling or disabling selected rules within a policy. A newly created rule will remain in notReady state until it is given a valid rule string (see hpicfGppcv2PrPolicyRule).
.1.3.6.1.4.1.11.2.14.11.5.1.64,HP-ICF-OID::hpicfDebugLog,,,,,,
.1.3.6.1.4.1.11.2.14.11.5.1.64.1,HP-ICF-DEBUGLOG-MIB::hpicfDebugLogMib,,,,,,The Debug MIB allows to enable / disable debug logging for all debug message types. This HP application enables / disables debug log messages.
.1.3.6.1.4.1.11.2.14.11.5.1.64.1.1,HP-ICF-DEBUGLOG-MIB::hpicfDebugLogObjects,,,,,,
.1.3.6.1.4.1.11.2.14.11.5.1.64.1.1.1,HP-ICF-DEBUGLOG-MIB::hpicfDebugLogControlTable,,not-accessible,,current,,This table contains one entry per debug message type for debug logging configuration.
.1.3.6.1.4.1.11.2.14.11.5.1.64.1.1.1.1,HP-ICF-DEBUGLOG-MIB::hpicfDebugLogControlEntry,,not-accessible,hpicfDebugLogIndex,current,,Debug logging configuration information for a particular debug message type.
.1.3.6.1.4.1.11.2.14.11.5.1.64.1.1.1.1.1,HP-ICF-DEBUGLOG-MIB::hpicfDebugLogIndex,Integer32,not-accessible,,current,,An unique number that identifies the debug message type for debug logging.
.1.3.6.1.4.1.11.2.14.11.5.1.64.1.1.1.1.2,HP-ICF-DEBUGLOG-MIB::hpicfDebugLogDescr,OCTET,read-only,,current,,This object provides description for the debug message type that can be enabled for debug logging.
.1.3.6.1.4.1.11.2.14.11.5.1.64.1.1.1.1.3,HP-ICF-DEBUGLOG-MIB::hpicfDebugLogContainedIn,Integer32,read-only,,current,,The value of hpicfDebugLogIndex for the debug message type which 'contains' this debug message type. Note that the set of 'containment' relationships define a strict hierarchy.
.1.3.6.1.4.1.11.2.14.11.5.1.64.1.1.1.1.4,HP-ICF-DEBUGLOG-MIB::hpicfDebugLogStatus,INTEGER,read-write,,current,true(1):false(2),This object determines the enable/disable status of a debug message type for debug logging.
.1.3.6.1.4.1.11.2.14.11.5.1.64.1.1.2,HP-ICF-DEBUGLOG-MIB::hpicfDebugLogLevel,INTEGER,read-write,,current,quiet(0):fatal(1):error(2):info(3):verbose(4):debug(5):debug2(6):debug3(7),The log level value for debug message type such as SSH.This scalar takes syslog severity values 'fatal|error|info|verbose|debug|debug2|debug3'. 
.1.3.6.1.4.1.11.2.14.11.5.1.64.1.1.3,HP-ICF-DEBUGLOG-MIB::hpicfDebugDestControlTable,,not-accessible,,current,,This table contains one entry per debug destination type i.e. Syslog/Buffer.
.1.3.6.1.4.1.11.2.14.11.5.1.64.1.1.3.1,HP-ICF-DEBUGLOG-MIB::hpicfDebugDestControlEntry,,not-accessible,hpicfDebugDestIndex,current,,Debug logging configuration information for a particular debug destination type.
.1.3.6.1.4.1.11.2.14.11.5.1.64.1.1.3.1.1,HP-ICF-DEBUGLOG-MIB::hpicfDebugDestIndex,INTEGER,not-accessible,,current,none(0):syslog(1):buffer(2),The index that uniquely identifies each debug  destination type for debug logging.
.1.3.6.1.4.1.11.2.14.11.5.1.64.1.1.3.1.2,HP-ICF-DEBUGLOG-MIB::hpicfDebugDestStatus,INTEGER,read-write,,current,true(1):false(2),This object determines the enable/disable status of a particular debug destination type i.e. Syslog Server/Buffer.
.1.3.6.1.4.1.11.2.14.11.5.1.64.1.2,HP-ICF-DEBUGLOG-MIB::hpicfDebugLogConformance,,,,,,
.1.3.6.1.4.1.11.2.14.11.5.1.64.1.2.1,HP-ICF-DEBUGLOG-MIB::hpicfDebugLogCompliances,,,,,,
.1.3.6.1.4.1.11.2.14.11.5.1.64.1.2.1.1,HP-ICF-DEBUGLOG-MIB::hpicfDebugLogCompliance,,,,,,The compliance statement for debug logging entities which implement the DEBUGLOG-MIB with support for writable objects. Such an implementation can be both monitored and configured via SNMP.
.1.3.6.1.4.1.11.2.14.11.5.1.64.1.2.2,HP-ICF-DEBUGLOG-MIB::hpicfDebugLogGroups,,,,,,
.1.3.6.1.4.1.11.2.14.11.5.1.64.1.2.2.1,HP-ICF-DEBUGLOG-MIB::hpicfDebugLogGroup,,,,,,A collection of objects representing the configuration parameters for debug logging.
.1.3.6.1.4.1.11.2.14.11.5.1.64.1.2.3,HP-ICF-DEBUGLOG-MIB::hpicfDebugDestGroups,,,,,,
.1.3.6.1.4.1.11.2.14.11.5.1.64.1.2.3.1,HP-ICF-DEBUGLOG-MIB::hpicfDebugDestGroup,,,,,,A collection of objects representing the configuration parameters for debug destination. 
.1.3.6.1.4.1.11.2.14.11.5.1.66,HP-ICF-OID::hpicfMacNotifyMIB,,,,,,
.1.3.6.1.4.1.11.2.14.11.5.1.66.0,HP-ICF-MACNOTIFY-MIB::hpicfMacNotifyNotificationObjects,,,,,,
.1.3.6.1.4.1.11.2.14.11.5.1.66.0.1,HP-ICF-MACNOTIFY-MIB::hpicfMacNotifyMacAddressTableChange,,,,,,The hpicfMacNotifyMacAddressTableChange notification signifies that hpicfMacNotifyEnable is enabled and either a MAC address table change learn / remove occurred on a configured hpicfMacNotifyTrapConfig interface or  hpicfMacNotifyMoveEnable is  enabled and a MAC address has been moved. Notifications will buffered on the system to be sent on hpicfMacNotifyTrapInterval. During high system activity, notification may be sent before the interval and in some cases, notifications will be dropped. The system will log dropped  notification events
.1.3.6.1.4.1.11.2.14.11.5.1.66.0.2,HP-ICF-MACNOTIFY-MIB::hpicfMacNotifyPortMacAddressCount,,,,,,The hpicfMacNotifyPortMacAddressCount notification signifies that  hpicfMacNotifyPortLearnedCountEnable is enabled and the number of MAC address learn has reached the configured MAC count on switch port. The hpicfMacNotifyMacAddress specifies the exceeded MAC learn address.
.1.3.6.1.4.1.11.2.14.11.5.1.66.1,HP-ICF-MACNOTIFY-MIB::hpicfMacNotifyConfigObjects,,,,,,
.1.3.6.1.4.1.11.2.14.11.5.1.66.1.1,HP-ICF-MACNOTIFY-MIB::hpicfMacNotifyEnable,INTEGER,read-write,,current,enable(1):disable(2),Indicates whether the SNMP entity is permitted to generate learned, moved or removed  hpicfMacNotifyMacAddressTableChange trap  notifications. Default is disabled.
.1.3.6.1.4.1.11.2.14.11.5.1.66.1.2,HP-ICF-MACNOTIFY-MIB::hpicfMacNotifyTrapInterval,Unsigned32,read-write,,current,,Defines the interval in seconds between sending hpicfMacNotifyMacAddressTableChange notifications. The notifications will be buffered on the system until the interval. If the buffer becomes full before the interval, the full buffer will be sent.  A value of 0 (zero) indicates MAC address changes will be sent when the event occurs. Default value is 30 seconds.
.1.3.6.1.4.1.11.2.14.11.5.1.66.1.3,HP-ICF-MACNOTIFY-MIB::hpicfMacNotifyMoveEnable,INTEGER,read-write,,current,enable(1):disable(2),Indicates whether the SNMP entity is permitted to generate hpicfMacNotifyMacAddressTableChange for MAC address moves on the system. Notifications are generated when a MAC address is moved from one port to another port on the system. hpicfMacNotifyEnable must be  enabled. Default is disable.
.1.3.6.1.4.1.11.2.14.11.5.1.66.1.4,HP-ICF-MACNOTIFY-MIB::hpicfMacNotifyLearnedPortConfig,OCTET,read-write,,current,,Used to configure the MAC address learned notification traps on specific ports. Each octet within this value specifies a set of eight ports, with the first octet specifying ports 1 through 8, the second octet specifying ports 9 through 16, etc. Within each octet, the  most significant bit represents the lowest numbered port, and the least significant bit represents the highest numbered port. Thus, each port is  represented by a single bit within the value of  this object. If that bit has a value of '1' then that port is enabled to send traps for learned MAC addresses; the port is not enabled if its bit has a value of '0'. Enabling hpicfMacNotifyLearnedPortConfig on a trunk port is permitted but not recommended.  hpicfMacNotifyEnable must be enabled for traps to be sent.
.1.3.6.1.4.1.11.2.14.11.5.1.66.1.5,HP-ICF-MACNOTIFY-MIB::hpicfMacNotifyRemovedPortConfig,OCTET,read-write,,current,,Used to configure the MAC address removed notification traps on specific ports. Each octet within this value specifies a set of eight ports, with the first octet specifying ports 1 through 8, the second octet specifying ports 9 through 16, etc. Within each octet, the  most significant bit represents the lowest numbered port, and the least significant bit represents the highest numbered port. Thus, each port is  represented by a single bit within the value of  this object.  If that bit has a value of '1' then that port is enabled to send traps for removed MAC addresses; the port is not enabled if its bit has a value of '0'. Enabling hpicfMacNotifyRemovedPortConfig on a trunk port is permitted but not recommended. hpicfMacNotifyEnable must be enabled for traps to be sent.
.1.3.6.1.4.1.11.2.14.11.5.1.66.1.6,HP-ICF-MACNOTIFY-MIB::hpicfMacNotifyAction,INTEGER,accessible-for-notify,,current,learned(1):moved(2):removed(3),Indicate the MAC address table change action for hpicfMacNotifyMacAddress: learned, moved or removed.
.1.3.6.1.4.1.11.2.14.11.5.1.66.1.7,HP-ICF-MACNOTIFY-MIB::hpicfMacNotifyMacAddress,OCTET,accessible-for-notify,,current,,The MAC address that has been  learned, moved, or removed in the MAC address table.
.1.3.6.1.4.1.11.2.14.11.5.1.66.1.8,HP-ICF-MACNOTIFY-MIB::hpicfMacNotifyFromPortId,Integer32,accessible-for-notify,,current,,The related from port index of the  MAC address hpicfMacNotifyMacAddress. Port index will be determined by the action in hpicfMacNotifyAction. Action: Learned: The value will be zero Moved: The port from which the MAC was moved Removed: The port from which MAC was removed
.1.3.6.1.4.1.11.2.14.11.5.1.66.1.9,HP-ICF-MACNOTIFY-MIB::hpicfMacNotifyToPortId,Integer32,accessible-for-notify,,current,,The related port index of the  MAC address hpicfMacNotifyMacAddress. Port index will be determined by the action in hpicfMacNotifyAction. Action: Learned: The actual port the MAC was learned Moved: The port to which the MAC was moved Removed: The value will be zero
.1.3.6.1.4.1.11.2.14.11.5.1.66.1.10,HP-ICF-MACNOTIFY-MIB::hpicfMacNotifyVlanId,Integer32,accessible-for-notify,,current,,The related Vlan ID of the  MAC address hpicfMacNotifyMacAddress. Vlan ID will be determined by the action in hpicfMacNotifyAction. Action: Learned: VLAN that the hpicfMacNotifyToPortId belongs to Moved: VLAN that the hpicfMacNotifyToPortId belongs to Removed: VLAN that hpicfMacNotifyFromPortId belongs to 
.1.3.6.1.4.1.11.2.14.11.5.1.66.2,HP-ICF-MACNOTIFY-MIB::hpicfMacNotifyStats,,,,,,
.1.3.6.1.4.1.11.2.14.11.5.1.66.2.1,HP-ICF-MACNOTIFY-MIB::hpicfMacNotifyLearnedCount,Counter32,read-only,,current,,A count of MAC addresses learned by the MAC Address Table. 
.1.3.6.1.4.1.11.2.14.11.5.1.66.2.2,HP-ICF-MACNOTIFY-MIB::hpicfMacNotifyRemovedCount,Counter32,read-only,,current,,A count of MAC addresses removed from the MAC Address Table. 
.1.3.6.1.4.1.11.2.14.11.5.1.66.2.3,HP-ICF-MACNOTIFY-MIB::hpicfMacNotifyMoveCount,Counter32,read-only,,current,, A count of MAC addresses moved in the MAC Address Table.
.1.3.6.1.4.1.11.2.14.11.5.1.66.2.4,HP-ICF-MACNOTIFY-MIB::hpicfMacNotifyCount,Counter32,read-only,,current,,A count of Mac Address notifications sent. hpicfMacNotifyEnable must be enabled for the counter to be activated.  This number is incremented each time a Mac Address Table Change learn/move/remove occurs on a hpicfMacNotifyTrapConfig enabled interface  or when hpicfMacNotifyMoveEnable is enabled. This count will include notifications that  are dropped due to buffering overflow during high activity. hpicfMacNotifyCount is initialized to zero at boot.
.1.3.6.1.4.1.11.2.14.11.5.1.66.3,HP-ICF-MACNOTIFY-MIB::hpicfMacNotifyConformance,,,,,,
.1.3.6.1.4.1.11.2.14.11.5.1.66.3.1,HP-ICF-MACNOTIFY-MIB::hpicfMacNotifyCompliances,,,,,,
.1.3.6.1.4.1.11.2.14.11.5.1.66.3.1.1,HP-ICF-MACNOTIFY-MIB::hpicfMacNotifyCompliance,,,,,,The compliance statement for SNMP entities which implement the MAC Notify MIB.
.1.3.6.1.4.1.11.2.14.11.5.1.66.3.1.2,HP-ICF-MACNOTIFY-MIB::hpicfMacCountNotifyCompliance,,,,,,The compliance steatement for SNMP entities which implement the mac count notify mib objects.
.1.3.6.1.4.1.11.2.14.11.5.1.66.3.2,HP-ICF-MACNOTIFY-MIB::hpicfMacNotifyGroups,,,,,,
.1.3.6.1.4.1.11.2.14.11.5.1.66.3.2.1,HP-ICF-MACNOTIFY-MIB::hpicfMacNotifyGlobalConfigGroup,,,,,, A collection of objects used to globally configure the SNMP traps used to monitor the MAC address table using the MAC-notify feature
.1.3.6.1.4.1.11.2.14.11.5.1.66.3.2.2,HP-ICF-MACNOTIFY-MIB::hpicfMacNotifyConfigGroup,,,,,,A collection of objects used to configure and to monitor, through SNMP traps, for the MAC address table changes (learns/removes).
.1.3.6.1.4.1.11.2.14.11.5.1.66.3.2.3,HP-ICF-MACNOTIFY-MIB::hpicfMacNotifyStatsGroup,,,,,,A group of counters used to maintain statistics on the number of MAC address table changes and the number of notification packets sent for changes in the MAC address table.
.1.3.6.1.4.1.11.2.14.11.5.1.66.3.2.4,HP-ICF-MACNOTIFY-MIB::hpicfMacNotifyNotifications,,,,,,A group of notifications used to signal changes (learns/moves/removes) in the MAC address table.
.1.3.6.1.4.1.11.2.14.11.5.1.66.3.2.5,HP-ICF-MACNOTIFY-MIB::hpicfMacNotifyClearGroup,,,,,, A collection of objects used to clear the MAC address tables
.1.3.6.1.4.1.11.2.14.11.5.1.66.3.2.6,HP-ICF-MACNOTIFY-MIB::hpicfMacCountNotifyConfigGroup,,,,,,A collection of objects used to configure and to montior, through SNMP traps, for the MAC address learn count on the ports.
.1.3.6.1.4.1.11.2.14.11.5.1.66.3.2.7,HP-ICF-MACNOTIFY-MIB::hpicfMacCountNotifyNotifications,,,,,,A group of Notifications used to signal mac address learn count on a port.
.1.3.6.1.4.1.11.2.14.11.5.1.66.4,HP-ICF-MACNOTIFY-MIB::hpicfMacNotifyClearObjects,,,,,,
.1.3.6.1.4.1.11.2.14.11.5.1.66.4.1,HP-ICF-MACNOTIFY-MIB::hpicfMacNotifyClearMacTableOnPorts,OCTET,read-write,,current,,Used to clear the MAC address table on a specific port. Each octet within this value specifies a set of eight ports, with the first octet specifying ports 1 through 8, the second octet specifying ports 9 through 16, etc. Within each octet, the  most significant bit represents the lowest numbered port, and the least significant bit represents the highest numbered port. Thus, each port is  represented by a single bit within the value of  this object. If that bit has a value of '1 then that port is included in the set of ports; the port is  not included if its bit has a value of '0'.
.1.3.6.1.4.1.11.2.14.11.5.1.66.4.2,HP-ICF-MACNOTIFY-MIB::hpicfMacNotifyClearMacTableOnVlan,Integer32,read-write,,current,,Used to clear the MAC address table on a specific VLAN. VLAN ID identifies the VLAN that will be  cleared.
.1.3.6.1.4.1.11.2.14.11.5.1.66.5,HP-ICF-MACNOTIFY-MIB::hpicfMacCountNotifyConfigObjects,,,,,,
.1.3.6.1.4.1.11.2.14.11.5.1.66.5.1,HP-ICF-MACNOTIFY-MIB::hpicfMacNotifyPortLearnedCountEnable,INTEGER,read-write,,current,enable(1):disable(2),Indicates whether or not to generate hpicfMacNotifyPortMacAddressCount trap. Notifications are generated when the MAC address count on a switch port equals the defined MAC count as in  hpicfMacNotifyPortLearnedCount object.  Default is disabled.
.1.3.6.1.4.1.11.2.14.11.5.1.66.5.2,HP-ICF-MACNOTIFY-MIB::hpicfMacNotifyPortLearnedCountConfig,OCTET,read-write,,current,,Used to config the MAC address learned  notification traps on specific ports.  Each octet within this value specifies a set of eight ports, with the first octet  specifying ports 1 through 8, the second  octet specifying ports 9 through 16, etc.  Within each octet, the most significant  bit represents the lowest numbered port, and the least significant bit represents the highest numbered port. Thus, each port is represented by a single bit within the value  of this object. If that bit has a value of '1' then that port is enabled to send traps for learned  MAC addresses;the port is not enabled if  its bit has a value of '0'. Enabling picfMacNotifyPortLearnedCountConfig  on a trunk port is permitted but not  recommended. hpicfMacNotifyPortLearnedCountEnable must  be enabled for traps to be sent.
.1.3.6.1.4.1.11.2.14.11.5.1.66.5.3,HP-ICF-MACNOTIFY-MIB::hpicfMacNotifyPortLearnedCountConfigTable,,not-accessible,,current,,Table containing the configured MAC count  for sending mac-count-notify traps on a port.
.1.3.6.1.4.1.11.2.14.11.5.1.66.5.3.1,HP-ICF-MACNOTIFY-MIB::hpicfMacNotifyPortLearnedCountConfigEntry,,not-accessible,hpicfMacNotifyPortIndex,current,,An entry in hpicfMacNotifyPortLearnedCountConfigTable containing MAC count for sending mac-count-notify traps  for a port.
.1.3.6.1.4.1.11.2.14.11.5.1.66.5.3.1.1,HP-ICF-MACNOTIFY-MIB::hpicfMacNotifyPortIndex,Integer32,not-accessible,,current,,Indicates the ifIndex of the port
.1.3.6.1.4.1.11.2.14.11.5.1.66.5.3.1.2,HP-ICF-MACNOTIFY-MIB::hpicfMacNotifyPortLearnedCount,Unsigned32,read-write,,current,,Indicates the count of MAC learns when reached to send the mac-notify traps
.1.3.6.1.4.1.11.2.14.11.5.1.67,HP-ICF-OID::hpicfGenericVlanMIB,,,,,,
.1.3.6.1.4.1.11.2.14.11.5.1.67.1,HP-ICF-GENERIC-VLAN-MIB::hpicfGenericVlanFeaturesObjects,,,,,,
.1.3.6.1.4.1.11.2.14.11.5.1.67.1.1,HP-ICF-GENERIC-VLAN-MIB::hpicfGenericVlanFeaturesTable,,not-accessible,,current,,This table contains objects that are generic to multiple VLAN features, using the same indices as dot1qTpFdbEntry
.1.3.6.1.4.1.11.2.14.11.5.1.67.1.1.1,HP-ICF-GENERIC-VLAN-MIB::hpicfGenericVlanFeaturesEntry,,not-accessible,,current,,A row in a table, containing the VLAN ID.
.1.3.6.1.4.1.11.2.14.11.5.1.67.1.1.1.1,HP-ICF-GENERIC-VLAN-MIB::hpicfMacNotifyClearVlanControl,INTEGER,read-write,,current,noOperation(1):macNotifyClearVlan(2),This variable uniquely identifies the operation that will be executed on the object this entry applies to. When read, noOperation(1) should be returned.
.1.3.6.1.4.1.11.2.14.11.5.1.67.1.1.1.2,HP-ICF-GENERIC-VLAN-MIB::hpicfDot1qTpFdbVlanId,Integer32,read-only,,current,,The VLAN ID to which this entry belongs.
.1.3.6.1.4.1.11.2.14.11.5.1.67.2,HP-ICF-GENERIC-VLAN-MIB::hpicfGenericVlanFeaturesConformance,,,,,,
.1.3.6.1.4.1.11.2.14.11.5.1.67.2.1,HP-ICF-GENERIC-VLAN-MIB::hpicfGenericVlanFeaturesCompliances,,,,,,
.1.3.6.1.4.1.11.2.14.11.5.1.67.2.1.1,HP-ICF-GENERIC-VLAN-MIB::hpicfGenericVlanFeaturesCompliance,,,,,,The compliance statement for SNMP entities which implement the MAC Notify MIB.
.1.3.6.1.4.1.11.2.14.11.5.1.67.2.2,HP-ICF-GENERIC-VLAN-MIB::hpicfGenericVlanFeaturesGroups,,,,,,
.1.3.6.1.4.1.11.2.14.11.5.1.67.2.2.2,HP-ICF-GENERIC-VLAN-MIB::hpicfGenericVlanFeaturesConfigGroup,,,,,,A collection of objects used for generic VLAN operations.
.1.3.6.1.4.1.11.2.14.11.5.1.68,HP-ICF-OID::hpSwitchErrorMsgMIB,,,,,,
.1.3.6.1.4.1.11.2.14.11.5.1.68.1,HP-SWITCH-ERROR-MSG-MIB::hpSwitchErrorMsgObjects,,,,,,
.1.3.6.1.4.1.11.2.14.11.5.1.68.1.1,HP-SWITCH-ERROR-MSG-MIB::hpSwitchErrorMsgTable,,not-accessible,,current,,This table contains the error status of the most recent  SNMP operation for each of the management entities. This table contains 10 application entries with 10 error message entries for each application. This table holds maximum 100 error message entries
.1.3.6.1.4.1.11.2.14.11.5.1.68.1.1.1,HP-SWITCH-ERROR-MSG-MIB::hpSwitchErrorMsgEntry,,not-accessible,hpSwitchErrorEntityType:hpSwitchErrorEntityHandle:hpSwitchErrorSnmpSeqCode,current,,An entry contains the information on the  handle of the entity and the corresponding error messages indexed with the SNMP sequence code.
.1.3.6.1.4.1.11.2.14.11.5.1.68.1.1.1.1,HP-SWITCH-ERROR-MSG-MIB::hpSwitchErrorEntityType,INTEGER,not-accessible,,current,others(1):cliSession(2):webSession(3):ipV4Address(4):ipV6Address(5):oaApplication(6),The management entity from which a SNMP request arrives. For the CLI application the value will be (2). The value will be (3) if the request is from a web  application. If the management entity is a Net Management application the value will be either (4) or (5) depending on whether they are carrying an IPv4 or an IPv6 address. For the OA (Open Architecture application the value will be (6).
.1.3.6.1.4.1.11.2.14.11.5.1.68.1.1.1.2,HP-SWITCH-ERROR-MSG-MIB::hpSwitchErrorEntityHandle,OCTET,not-accessible,,current,,The handle corresponding to the application performing  the SNMP operation. The handle will denote an IP Address, if the application is a Net management application. Or it will be the session id of the CLI, WEB or the OA application
.1.3.6.1.4.1.11.2.14.11.5.1.68.1.1.1.3,HP-SWITCH-ERROR-MSG-MIB::hpSwitchErrorSnmpSeqCode,Integer32,not-accessible,,current,,This denotes the SNMP sequence code sent by the requester.
.1.3.6.1.4.1.11.2.14.11.5.1.68.1.1.1.4,HP-SWITCH-ERROR-MSG-MIB::hpSwitchErrorTime,OCTET,read-only,,current,,This denotes the Date and Time when the SNMP set `request processing has failed.
.1.3.6.1.4.1.11.2.14.11.5.1.68.1.1.1.5,HP-SWITCH-ERROR-MSG-MIB::hpSwitchErrorFailedOID,OBJECT,read-only,,current,,This denotes the OID of the SNMP Object for which the SNMP set request processing has failed.
.1.3.6.1.4.1.11.2.14.11.5.1.68.1.1.1.6,HP-SWITCH-ERROR-MSG-MIB::hpSwitchEntityErrorMsg,OCTET,read-only,,current,,An error message having descriptive information about  the error for the failed SNMP set request.
.1.3.6.1.4.1.11.2.14.11.5.1.68.1.1.1.7,HP-SWITCH-ERROR-MSG-MIB::hpSwitchSnmpErrorCode,Integer32,read-only,,current,,The SNMP error code which is retuned when the SNMP set request failed.
.1.3.6.1.4.1.11.2.14.11.5.1.68.2,HP-SWITCH-ERROR-MSG-MIB::hpSwitchErrorMsgMIBConformance,,,,,,
.1.3.6.1.4.1.11.2.14.11.5.1.68.2.1,HP-SWITCH-ERROR-MSG-MIB::hpSwitchErrorMsgMIBCompliances,,,,,,
.1.3.6.1.4.1.11.2.14.11.5.1.68.2.1.1,HP-SWITCH-ERROR-MSG-MIB::hpSwitchErrorMsgMIBCompliance,,,,,,The compliance statement for switch error message entities
.1.3.6.1.4.1.11.2.14.11.5.1.68.2.2,HP-SWITCH-ERROR-MSG-MIB::hpSwitchErrorMsgMIBGroups,,,,,,
.1.3.6.1.4.1.11.2.14.11.5.1.68.2.2.1,HP-SWITCH-ERROR-MSG-MIB::hpSwitchErrorMsgMIBGroup,,,,,,A collection of objects for switch error message.
.1.3.6.1.4.1.11.2.14.11.5.1.69,HP-ICF-OID::hpStackMIB,,,,,,
.1.3.6.1.4.1.11.2.14.11.5.1.69.0,HP-STACK-MIB::hpStackNotifications,,,,,,
.1.3.6.1.4.1.11.2.14.11.5.1.69.0.1,HP-STACK-MIB::hpStackPortChange,,,,,,This notification is generated when the state of a stack port has changed.
.1.3.6.1.4.1.11.2.14.11.5.1.69.0.2,HP-STACK-MIB::hpStackCommanderChange,,,,,,This notification is generated when a new commander  first comes up. The notification is also sent when  a failover happens, and the standby becomes commander or when the commander is down.
.1.3.6.1.4.1.11.2.14.11.5.1.69.0.3,HP-STACK-MIB::hpStackMemberChange,,,,,,This notification is generated when a new member joins  the stack or when it moves from a loose provisioned to  strict provisioned.
.1.3.6.1.4.1.11.2.14.11.5.1.69.0.4,HP-STACK-MIB::hpStackMemberStatusChange,,,,,,This notification is generated when a member becomes active or inactive.
.1.3.6.1.4.1.11.2.14.11.5.1.69.0.5,HP-STACK-MIB::hpStackMergeFailed,,,,,,This notification is generated when a new member attempts to join the stack, but was denied.  This could be because of: a. Merge policy of stack prevents the switch from joining b. Merge policy of switch prevents it from joining c. Stacking disabled on switch d. No available member ID's on stack e. Switch is incorrectly provisioned  (wrong J-Number, correct MAC). hpStackId here is the other Stack Id.
.1.3.6.1.4.1.11.2.14.11.5.1.69.0.6,HP-STACK-MIB::hpStackMergeSuccess,,,,,,This notification is generated when a new member  attempts to join the stack and have successfully merged.  This will be sent by each stack that got merged.
.1.3.6.1.4.1.11.2.14.11.5.1.69.1,HP-STACK-MIB::hpStackObjects,,,,,,
.1.3.6.1.4.1.11.2.14.11.5.1.69.1.1,HP-STACK-MIB::hpStackConfig,,,,,,
.1.3.6.1.4.1.11.2.14.11.5.1.69.1.1.1,HP-STACK-MIB::hpStackId,OCTET,read-only,,current,,The stack ID uniquely identifies the stack; all members of the stack have the same stack ID. A switch is considered to be a part of a stack When it has the same stack ID as the stack commander. The stack ID is valid only when hpStackSwitchAdminStatus is true (1). This value is set by the first elected commander and stays with the stack until the user sets the hpStackSwitchAdminStatus to 'false (2)' or when hpStackSetStacking is set to 'true (1)' in an inactive fragment.
.1.3.6.1.4.1.11.2.14.11.5.1.69.1.1.2,HP-STACK-MIB::hpStackOperStatus,INTEGER,read-only,,current,unAvailable(0):disabled(1):active(2):fragmentInactive(3):fragmentActive(4),This is the current operational status of  the stack. 
.1.3.6.1.4.1.11.2.14.11.5.1.69.1.1.3,HP-STACK-MIB::hpStackSetStacking,INTEGER,read-write,,current,true(1):false(2),This variable allows configuration of a stack fragment created by a stack split.  When set to 'true (1)' in the greater fragment, the physically present members of the current stack become the only members, and the configuration of the missing members is converted to strict provisioned configuration. When set to 'true (1)' on a lesser fragment, the existing stack information is cleared and a new stack ID is created. The switches in the stack will become 'active' and retain their configuration. No action is taken when set to 'false (2)' in any stack.
.1.3.6.1.4.1.11.2.14.11.5.1.69.1.1.4,HP-STACK-MIB::hpStackTopology,INTEGER,read-only,,current,unKnown(0):chain(1):ring(2):mesh(3):partialMesh(4), This describes the physical topology of the current stack.
.1.3.6.1.4.1.11.2.14.11.5.1.69.1.1.5,HP-STACK-MIB::hpStackTrapEnable,INTEGER,read-write,,current,enable(1):disable(2), This enables or disables the hpStack traps.
.1.3.6.1.4.1.11.2.14.11.5.1.69.1.2,HP-STACK-MIB::hpStackConfigTable,,not-accessible,,current,,Table to configure basic  stacking feature.
.1.3.6.1.4.1.11.2.14.11.5.1.69.1.2.1,HP-STACK-MIB::hpStackConfigEntry,,not-accessible,hpStackSequenceNum,current,,A row in the stack config table.
.1.3.6.1.4.1.11.2.14.11.5.1.69.1.2.1.1,HP-STACK-MIB::hpStackSequenceNum,Integer32,not-accessible,,current,,This is the sequence number to this table. At any instance of time only one entry exists.
.1.3.6.1.4.1.11.2.14.11.5.1.69.1.2.1.2,HP-STACK-MIB::hpStackSwitchAdminStatus,INTEGER,read-write,,current,enable(1):disable(2),The admin status of the stacking feature. When set to 'enable (1)', this will enable stacking on a standalone switch that had stacking disabled previously. Once stacking is enabled, the switch will not have a stack ID and merges automatically to any stack it is connected to and learns the stack ID of that stack. It has no effect on a switch where stacking is already enabled. Setting this to 'disable (2)' will disable stacking on a standalone switch. Once stacking is disabled, the stack ports will be kept down. This will prevent the switch from ever joining or creating a stack. This is allowed only on a standalone switch, that is, a switch that is not connected over a stacking link to any other switch. It has no effect on a switch where stacking is already disabled.  Enabling or disabling stacking will trigger a reboot of the switch.  When hpStackSwitchAdminStatus is set to 'true (1)', and if the user wants to set the preferred priority and the member ID of the switch, then hpStackSwitchPreferredPriority and hpStackSwitchPreferredMemberId needs to be set along with hpStackSwitchAdminStatus. If the priority and member ID are not specified, then the default values will be used.
.1.3.6.1.4.1.11.2.14.11.5.1.69.1.2.1.3,HP-STACK-MIB::hpStackSwitchPreferredPriority,Integer32,read-write,,current,, This allows the user to set the priority of a switch when stacking is enabled on it. hpStackSwitchPreferredPriority needs to be set along with hpStackSwitchAdminStatus being set to 'true (1)'.  Note that this is to be used only when enabling stacking. To set the priority of a switch on which stacking is already enabled,  use hpStackMemberTable.  hpStackSwitchPreferredPriority is unused when  hpStackSwitchAdminStatus is false (2).
.1.3.6.1.4.1.11.2.14.11.5.1.69.1.2.1.4,HP-STACK-MIB::hpStackSwitchPreferredMemberId,Integer32,read-write,,current,, This allows the user to set the preferred member ID of a switch when stacking is enabled on it. hpStackSwitchPreferredMemberId needs to be set along with setting hpStackSwitchAdminStatus being set to 'true (1)'. This entry is useful only at the time of setting hpStackSwitchAdminStatus to 'true (1)'. hpStackSwitchPreferredMemberId is unused when hpStackSwitchAdminStatus is set to false (2).
.1.3.6.1.4.1.11.2.14.11.5.1.69.1.3,HP-STACK-MIB::hpStackMemberTable,,not-accessible,,current,,Table to configure stack members.
.1.3.6.1.4.1.11.2.14.11.5.1.69.1.3.1,HP-STACK-MIB::hpStackMemberEntry,,not-accessible,hpStackMemberId,current,,A row in the stack member table.
.1.3.6.1.4.1.11.2.14.11.5.1.69.1.3.1.1,HP-STACK-MIB::hpStackMemberId,Integer32,not-accessible,,current,,This is the member ID of the switch and  index to this table. This identifies  each member in the stack.
.1.3.6.1.4.1.11.2.14.11.5.1.69.1.3.1.2,HP-STACK-MIB::hpStackMemberProductId,OCTET,read-create,,current,,This is the product ID [J-number] of the switch. When a member is provisioned,  this is a mandatory field. The product must be capable of stacking support.
.1.3.6.1.4.1.11.2.14.11.5.1.69.1.3.1.3,HP-STACK-MIB::hpStackMemberMacAddr,OCTET,read-create,,current,,The MAC address that identifies the member switch. The configuration of MAC address will not be  allowed if another table exists with the same MAC address.
.1.3.6.1.4.1.11.2.14.11.5.1.69.1.3.1.4,HP-STACK-MIB::hpStackMemberShutdown,INTEGER,read-create,,current,true(1):false(2),For the members that physically exist,  this will cause the switch to shutdown. If the switch is a standby, a new standby  switch will be chosen.  To shutdown, it needs to be set to  'true (1)'. A write operation of 'false (2)'  leads to no operation. This can be set to  'true (1)' only if the member physically exists  and is an active member of the stack. This variable cannot be set to 'true (1)' if the member ID corresponds to a commander.  This object will always return 'false (2)'.
.1.3.6.1.4.1.11.2.14.11.5.1.69.1.3.1.5,HP-STACK-MIB::hpStackMemberReboot,INTEGER,read-create,,current,true(1):false(2),Setting this variable to 'true (1)' will reboot the switch. A write operation of 'false (2)' leads to no operation.  This object will always return 'false (2)' Reboot is allowed only when a  member exist physically.
.1.3.6.1.4.1.11.2.14.11.5.1.69.1.3.1.6,HP-STACK-MIB::hpStackMemberAdminPriority,Integer32,read-create,,current,,This assigns the priority to the member. If the stack is rebooted and the members are  assigned with priorities, then commander will  be the one with the highest priority and the  standby will be the one with the next highest priority. The following rules apply for assigning the priority:  1. In the existing stack, if the priority  is increased, the member is likely to become  commander only the next time the stack is rebooted,  it will not be immediately elected as commander.   2. A switch with the highest priority will not be elected as commander if it is a new member of the stack  even when the stack is rebooted as it will not have the latest configurations.  3. If a commander switch with highest priority fails  over to standby, it will not become commander again in the subsequent reboot. The stack itself needs to  be booted or the failover to this commander should happen.  4. A switch that joins an already active stack will not  become the commander even if it has the highest priority. 5. If the priority is assigned to the member when it is in standalone state and when it joins the stack, if the stack  configuration has an existing pre-provisioned priority for this member, then the pre-provisioned value preempts the  standalone value. To assign priority to a member, the member can either be provisioned or physically present.
.1.3.6.1.4.1.11.2.14.11.5.1.69.1.3.1.7,HP-STACK-MIB::hpStackMemberEntryStatus,INTEGER,read-create,,current,active(1):notInService(2):notReady(3):createAndGo(4):createAndWait(5):destroy(6),The status of a stack member entry. The member entry is created with the row status value as createAndGo (4) and the hpStackMemberProductId. The createAndWait(5) is not  supported by this mib table. To remove the switch from the stack,  row status is set to destroy (6). Setting it to 'destory (6)' is not  allowed if the member ID corresponds to a commander switch.  For the physically existing switch, if hpStackMemberReboot is set to  'true (1)' along with the row status to  'destroy (6), the switch will come up with a  blank configuration and will acquire a new hpStackMemberId.
.1.3.6.1.4.1.11.2.14.11.5.1.69.1.3.1.8,HP-STACK-MIB::hpStackMemberEntPhysicalIndex,Integer32,read-only,,current,,This gives the index of this member in the entPhysicalTable (rfc2737).
.1.3.6.1.4.1.11.2.14.11.5.1.69.1.3.1.9,HP-STACK-MIB::hpStackMemberState,INTEGER,read-only,,current,unusedId(0):missing(1):provision(2):commander(3):standby(4):member(5):shutdown(6):booting(7):communicationFailure(8):incompatibleOs(9):unknownState(10):standbyBooting(11),This gives the status of the switch in the stack.  unusedId (0) - The member ID does not exist.  missing (1) - A member switch in the stack when it becomes Non responsive, it is  marked as the missing member. Either  the stack link goes down or the stack  member crashed. Note that it is possible  to remove even the missing member from  the stack. In this case, the missing members  configuration is removed from the  stack config file. provision (2) - A member switch whose config is  provisioned and that does not exist physically. commander (3) - One physical switch whose master  CPU takes up the role that the active management module in  the 8200 switch would take. standby (4) - One physical switch whose master CPU takes up the role that the standby management module in  the 8200 switch would take. member (5) - A switch that is part of the stack. shutdown (6) - The switch is in the shutdown  state. booting (7) - The switch is in the booting  state. communicationFailure (8) - This is an error condition.  The switch cannot be reached. incompatibleOs (9) - This is an error condition.  The member switch runs with a different OS image. unknownState (10) - The member switch's state cannot be  determined. This is an error condition. standbyBooting (11) - The standby switch is currently booting up. When boot is completed, the state will be 'standby (4)'.
.1.3.6.1.4.1.11.2.14.11.5.1.69.1.3.1.10,HP-STACK-MIB::hpStackMemberProductName,OCTET,read-only,,current,,This gives the product name of the switch.
.1.3.6.1.4.1.11.2.14.11.5.1.69.1.3.1.11,HP-STACK-MIB::hpStackMemberUpTime,TimeTicks,read-only,,current,,This provides the uptime of this specific  member. This is different from the stack uptime.
.1.3.6.1.4.1.11.2.14.11.5.1.69.1.3.1.12,HP-STACK-MIB::hpStackMemberSysOid,OBJECT,read-only,,current,,This provides the sysObjectId of this  specific member.
.1.3.6.1.4.1.11.2.14.11.5.1.69.1.3.1.13,HP-STACK-MIB::hpStackMemberIdForTrap,Integer32,accessible-for-notify,,current,,This is same as hpStackMemberId.  This is useful only for the notifications.
.1.3.6.1.4.1.11.2.14.11.5.1.69.1.3.1.14,HP-STACK-MIB::hpStackMemberSerialNum,OCTET,read-only,,current,,This is the serial number of the member switch.
.1.3.6.1.4.1.11.2.14.11.5.1.69.1.3.1.15,HP-STACK-MIB::hpStackMemberCpuUtil,Integer32,read-only,,current,,This is the percantage of CPU utilization of the member the switch.
.1.3.6.1.4.1.11.2.14.11.5.1.69.1.3.1.16,HP-STACK-MIB::hpStackMemberTotalMemory,Integer32,read-only,,current,,This is the total memory usage in bytes of the  member switch.
.1.3.6.1.4.1.11.2.14.11.5.1.69.1.3.1.17,HP-STACK-MIB::hpStackMemberFreeMemory,Integer32,read-only,,current,,This is the free memory available, in bytes, on the member switch.
.1.3.6.1.4.1.11.2.14.11.5.1.69.1.3.1.18,HP-STACK-MIB::hpStackMemberBootRomVersion,OCTET,read-only,,current,,This is the boot ROM version in the member switch.
.1.3.6.1.4.1.11.2.14.11.5.1.69.1.3.1.19,HP-STACK-MIB::hpStackMemberOsVersion,OCTET,read-only,,current,,This is the switch operating system version on the member switch.
.1.3.6.1.4.1.11.2.14.11.5.1.69.1.3.1.20,HP-STACK-MIB::hpStackMemberBootImage,INTEGER,read-only,,current,primary(1):secondary(2),This is the boot image information of the member.
.1.3.6.1.4.1.11.2.14.11.5.1.69.1.5,HP-STACK-MIB::hpStackPortTable,,not-accessible,,current,,Table of info about the stack ports.
.1.3.6.1.4.1.11.2.14.11.5.1.69.1.5.1,HP-STACK-MIB::hpStackPortEntry,,not-accessible,hpStackMemberId:hpStackPortId:hpStackPortType,current,,A row in the stack port table.
.1.3.6.1.4.1.11.2.14.11.5.1.69.1.5.1.1,HP-STACK-MIB::hpStackPortId,Integer32,not-accessible,,current,,This is the stack port ID.
.1.3.6.1.4.1.11.2.14.11.5.1.69.1.5.1.2,HP-STACK-MIB::hpStackPortType,INTEGER,not-accessible,,current,backPlane(1):frontPlane(2),This is the stack port type.
.1.3.6.1.4.1.11.2.14.11.5.1.69.1.5.1.3,HP-STACK-MIB::hpStackPortOperStatus,INTEGER,read-only,,current,up(1):down(2):disabled(3):blocked(4),This gives the stack port state.
.1.3.6.1.4.1.11.2.14.11.5.1.69.1.5.1.4,HP-STACK-MIB::hpStackPortNeighbor,OCTET,read-only,,current,,This contains the value of the  hpStackMemberId and hpStackPortId  of the switch's chassis to which this  stack port is connected. If the  stack port is not connected, it returns  a value of zero.
.1.3.6.1.4.1.11.2.14.11.5.1.69.1.5.1.5,HP-STACK-MIB::hpStackPortCost,Integer32,read-only,,current,,This gives the stack port cost.
.1.3.6.1.4.1.11.2.14.11.5.1.69.1.5.1.6,HP-STACK-MIB::hpStackPortIdForTrap,Integer32,accessible-for-notify,,current,,This is same as hpStackPortId.  This is useful only for the notifications.
.1.3.6.1.4.1.11.2.14.11.5.1.69.1.5.1.7,HP-STACK-MIB::hpStackPortTypeForTrap,INTEGER,accessible-for-notify,,current,backPlane(1):frontPlane(2),This is same as hpStackPortType.  This is useful only for the notifications.
.1.3.6.1.4.1.11.2.14.11.5.1.69.1.5.1.8,HP-STACK-MIB::hpStackPortAdminStatus,INTEGER,read-write,,current,enable(1):disable(2),Setting this variable to 'enable(1)' is allowed only when  hpStackPortOperStatus is in 'disabled(3)' state. A set operation of disable(2) is not allowed. A get operation on this returns 'enabled' only when  the hpStackPortOperStatus is up.
.1.3.6.1.4.1.11.2.14.11.5.1.69.2,HP-STACK-MIB::hpStackConformance,,,,,,
.1.3.6.1.4.1.11.2.14.11.5.1.69.2.1,HP-STACK-MIB::hpStackCompliances,,,,,,
.1.3.6.1.4.1.11.2.14.11.5.1.69.2.1.1,HP-STACK-MIB::hpStackCompliance,,,,,,The compliance statement for the hpStack mib.
.1.3.6.1.4.1.11.2.14.11.5.1.69.2.2,HP-STACK-MIB::hpStackGroups,,,,,,
.1.3.6.1.4.1.11.2.14.11.5.1.69.2.2.1,HP-STACK-MIB::hpStackConfigScalarGroup,,,,,,A collection of objects for the basic stack configuration.
.1.3.6.1.4.1.11.2.14.11.5.1.69.2.2.2,HP-STACK-MIB::hpStackMemberGroup,,,,,,A collection of objects for the configuring a  member switch of the stack.
.1.3.6.1.4.1.11.2.14.11.5.1.69.2.2.3,HP-STACK-MIB::hpStackPortGroup,,,,,,A collection of objects providing  information about the stack ports.
.1.3.6.1.4.1.11.2.14.11.5.1.69.2.2.4,HP-STACK-MIB::hpStackNotificationsGroup,,,,,,A collection of objects providing  information about the stack ports.
.1.3.6.1.4.1.11.2.14.11.5.1.70,HP-ICF-OID::hpicfLayer3VlanConfigMIB,,,,,,
.1.3.6.1.4.1.11.2.14.11.5.1.70.1,HP-ICF-LAYER3VLAN-MIB::hpicfLayer3VlanConfig,,,,,,
.1.3.6.1.4.1.11.2.14.11.5.1.70.1.1,HP-ICF-LAYER3VLAN-MIB::hpicfLayer3VlanConfigTable,,not-accessible,,current,,This table contains layer 3 adminStatus configuration information for each VLAN interface.
.1.3.6.1.4.1.11.2.14.11.5.1.70.1.1.1,HP-ICF-LAYER3VLAN-MIB::hpicfLayer3VlanConfigEntry,,not-accessible,ifIndex,current,,An entry in the hpicfLayer3VlanConfigEntry contains objects for configuring layer 3 adminStatus for a VLAN interface.
.1.3.6.1.4.1.11.2.14.11.5.1.70.1.1.1.1,HP-ICF-LAYER3VLAN-MIB::hpicfLayer3VlanStatus,INTEGER,read-write,,current,enable(1):disable(2),The object contains the desired adminStatus of layer 3 on  a VLAN. If set to 'enable' then layer 3(IPv4/IPv6) is  enabled on that VLAN. If set to 'disable' then layer 3 is disabled on that VLAN.
.1.3.6.1.4.1.11.2.14.11.5.1.70.2,HP-ICF-LAYER3VLAN-MIB::hpicfLayer3VlanConfigConformance,,,,,,
.1.3.6.1.4.1.11.2.14.11.5.1.70.2.1,HP-ICF-LAYER3VLAN-MIB::hpicfL3VlanConfigMIBCompliances,,,,,,
.1.3.6.1.4.1.11.2.14.11.5.1.70.2.1.1,HP-ICF-LAYER3VLAN-MIB::hpicfL3VlanConfigMIBCompliance,,,,,,The compliance statement for HP routers having layer 3 enable/disable of 'All VLANs' feature and implementing the HP-ICF-LAYER3VLAN-MIB.
.1.3.6.1.4.1.11.2.14.11.5.1.70.2.2,HP-ICF-LAYER3VLAN-MIB::hpicfLayer3VlanConfigMIBGroups,,,,,,
.1.3.6.1.4.1.11.2.14.11.5.1.70.2.2.1,HP-ICF-LAYER3VLAN-MIB::hpicfLayer3VlanConfigGroup,,,,,,A collection of HP proprietary objects to support enabling/disabling layer 3 on VLANs on HP routers.
.1.3.6.1.4.1.11.2.14.11.5.1.71,HP-ICF-OID::hpEntityPowerMIB,,,,,,
.1.3.6.1.4.1.11.2.14.11.5.1.71.1,HP-ENTITY-POWER-MIB::hpEntPowerObjects,,,,,,
.1.3.6.1.4.1.11.2.14.11.5.1.71.1.1,HP-ENTITY-POWER-MIB::hpEntPowerTable,,not-accessible,,current,,A table of information about the power status of entities. This is a sparse augment of the entPhysicalTable. Entries appear in this table for values of entPhysicalClass [RFC4133] that in this implementation are able to report any of the power state or status stored in this table.
.1.3.6.1.4.1.11.2.14.11.5.1.71.1.1.1,HP-ENTITY-POWER-MIB::hpEntPowerEntry,,not-accessible,entPhysicalIndex,current,,Power related information about this physical entity.
.1.3.6.1.4.1.11.2.14.11.5.1.71.1.1.1.1,HP-ENTITY-POWER-MIB::hpEntPowerMaxPowerUsage,Unsigned32,read-only,,current,,This MIB object returns the maximum power usage of this entity. This would typically correspond to the maximum power rating of the entity.
.1.3.6.1.4.1.11.2.14.11.5.1.71.1.1.1.2,HP-ENTITY-POWER-MIB::hpEntPowerMinPowerUsage,Unsigned32,read-only,,current,,This MIB object returns the minimum power usage of this entity. This is applicable only to those entities  that can be administratively set to function in a low power state.
.1.3.6.1.4.1.11.2.14.11.5.1.71.1.1.1.3,HP-ENTITY-POWER-MIB::hpEntPowerCurrentPowerUsage,Unsigned32,read-only,,current,,This MIB object returns the current power usage of this entity. For entities that cannot be set to function in a low power mode, the value returned by this object would be the same as that of entPowerMaxPowerUsage. For entities that are set to function in a low power mode, the value returned would be the same as that of  entPowerMinPowerUsage.
.1.3.6.1.4.1.11.2.14.11.5.1.71.2,HP-ENTITY-POWER-MIB::hpEntPowerConformance,,,,,,
.1.3.6.1.4.1.11.2.14.11.5.1.71.2.1,HP-ENTITY-POWER-MIB::hpEntPowerCompliances,,,,,,
.1.3.6.1.4.1.11.2.14.11.5.1.71.2.1.1,HP-ENTITY-POWER-MIB::hpEntPowerCompliance,,,,,,The compliance statement for systems supporting the HP Entity Power MIB.
.1.3.6.1.4.1.11.2.14.11.5.1.71.2.2,HP-ENTITY-POWER-MIB::hpEntPowerGroups,,,,,,
.1.3.6.1.4.1.11.2.14.11.5.1.71.2.2.1,HP-ENTITY-POWER-MIB::hpEntPowerGroup,,,,,,HP proprietary Entity Power group.
.1.3.6.1.4.1.11.2.14.11.5.1.72,HP-ICF-OID::hpicfTrafficTemplateMIB,,,,,,
.1.3.6.1.4.1.11.2.14.11.5.1.73,HP-ICF-OID::hpicfDcbxMIB,,,,,,
.1.3.6.1.4.1.11.2.14.11.5.1.74,HP-ICF-OID::hpicfUfdMIB,,,,,,
.1.3.6.1.4.1.11.2.14.11.5.1.74.0,HP-ICF-UFD-MIB::hpicfUfdNotifications,,,,,,
.1.3.6.1.4.1.11.2.14.11.5.1.74.0.0,HP-ICF-UFD-MIB::hpicfUfdNotificationPrefix,,,,,,
.1.3.6.1.4.1.11.2.14.11.5.1.74.0.0.3,HP-ICF-UFD-MIB::hpicfUfdLtDAutoDisabled,,,,,,This notification is generated when ports in LtD for this track entity are auto-disabled as a result of LtMs loosing link  to partner.
.1.3.6.1.4.1.11.2.14.11.5.1.74.0.0.4,HP-ICF-UFD-MIB::hpicfUfdLtDAutoEnabled,,,,,,This notification is generated when ports in LtD for this track entity are auto-enabled as a result of LtMs regaining link to thries partners.
.1.3.6.1.4.1.11.2.14.11.5.1.74.1,HP-ICF-UFD-MIB::hpicfUfdConfigObjects,,,,,,
.1.3.6.1.4.1.11.2.14.11.5.1.74.1.1,HP-ICF-UFD-MIB::hpicfUfdScalars,,,,,,
.1.3.6.1.4.1.11.2.14.11.5.1.74.1.1.1,HP-ICF-UFD-MIB::hpicfUfdAdminStatus,INTEGER,read-write,,current,enable(1):disable(2),Global administrative status of UFD. UFD is globally disabled by default.
.1.3.6.1.4.1.11.2.14.11.5.1.74.1.1.2,HP-ICF-UFD-MIB::hpicfUfdNotifyTrackId,Integer32,accessible-for-notify,,current,,The track ID corresponding to track data in the Trap.
.1.3.6.1.4.1.11.2.14.11.5.1.74.1.2,HP-ICF-UFD-MIB::hpicfUfdTrackEntities,,,,,,
.1.3.6.1.4.1.11.2.14.11.5.1.74.1.2.1,HP-ICF-UFD-MIB::hpicfUfdTrackTable,,not-accessible,,current,,A Table of UFD track entities. This table is meant for configuration.
.1.3.6.1.4.1.11.2.14.11.5.1.74.1.2.1.1,HP-ICF-UFD-MIB::hpicfUfdTrackEntry,,not-accessible,hpicfUfdTrackId,current,,An entry in the table containing information about the entity being tracked.
.1.3.6.1.4.1.11.2.14.11.5.1.74.1.2.1.1.1,HP-ICF-UFD-MIB::hpicfUfdTrackId,Integer32,not-accessible,,current,,A value that uniquely identifies a row in the track entity table
.1.3.6.1.4.1.11.2.14.11.5.1.74.1.2.1.1.2,HP-ICF-UFD-MIB::hpicfUfdTrackEntityType,INTEGER,read-write,,current,ufd(1),The type of the entity being tracked by UFD.
.1.3.6.1.4.1.11.2.14.11.5.1.74.1.2.1.1.3,HP-ICF-UFD-MIB::hpicfUfdLinksToMonitor,OCTET,read-write,,current,,This is a list of ports configured as links-to-monitor for this track entity.
.1.3.6.1.4.1.11.2.14.11.5.1.74.1.2.1.1.4,HP-ICF-UFD-MIB::hpicfUfdLinksToTransition,OCTET,read-write,,current,,This is a list of ports configured as links-to-transition for this track entity. This object will represent the ports in links-to-disable list if the entity type is ufd.
.1.3.6.1.4.1.11.2.14.11.5.1.74.1.2.1.1.5,HP-ICF-UFD-MIB::hpicfUfdLinksToMonitorState,INTEGER,read-only,,current,up(1):down(2),This object specifies the current state of the links-to-monitor. up : At least one port/trunk configured as part of links-to-monitor is linked up. down: All ports/trunks configured as part of links-to-monitor have lost link.
.1.3.6.1.4.1.11.2.14.11.5.1.74.1.2.1.1.6,HP-ICF-UFD-MIB::hpicfUfdLinksToTransitionState,INTEGER,read-only,,current,up(1):autoDisabled(2),This object specifies the current state of the links-to-transition. up: UFD has not taken any action on the ports/trunks. autoDisabled : UFD has auto-disabled the ports/trunks.
.1.3.6.1.4.1.11.2.14.11.5.1.74.1.2.1.1.7,HP-ICF-UFD-MIB::hpicfUfdTrackEntityState,INTEGER,read-only,,current,none(0):ok(1):failed(2),State of the tracked entity.
.1.3.6.1.4.1.11.2.14.11.5.1.74.1.2.1.1.8,HP-ICF-UFD-MIB::hpicfUfdTrackEntityRowStatus,INTEGER,read-create,,current,active(1):notInService(2):notReady(3):createAndGo(4):createAndWait(5):destroy(6),Row status of the tracked entity.
.1.3.6.1.4.1.11.2.14.11.5.1.74.1.2.1.1.9,HP-ICF-UFD-MIB::hpicfUfdLinksToMonitorType,INTEGER,read-write,,current,none(0):portMap(1):lacpKey(2),This object specifies the type of hpicfUfdLinksToMonitor object.
.1.3.6.1.4.1.11.2.14.11.5.1.74.1.2.1.1.10,HP-ICF-UFD-MIB::hpicfUfdLinksToTransitionType,INTEGER,read-write,,current,none(0):portMap(1):lacpKey(2),This object specifies the type of hpicfUfdLinksToTransition object.
.1.3.6.1.4.1.11.2.14.11.5.1.74.3,HP-ICF-UFD-MIB::hpicfUfdConformance,,,,,,
.1.3.6.1.4.1.11.2.14.11.5.1.74.3.1,HP-ICF-UFD-MIB::hpicfUfdCompliances,,,,,,
.1.3.6.1.4.1.11.2.14.11.5.1.74.3.1.1,HP-ICF-UFD-MIB::hpicfUfdCompliance,,,,,,The compliance statement for SNMP entities which implement the UFD MIB
.1.3.6.1.4.1.11.2.14.11.5.1.74.3.2,HP-ICF-UFD-MIB::hpicfUfdGroups,,,,,,
.1.3.6.1.4.1.11.2.14.11.5.1.74.3.2.1,HP-ICF-UFD-MIB::hpicfUfdBaseGroup,,,,,,The collection of objects for UFD base group. This group is mandatory.
.1.3.6.1.4.1.11.2.14.11.5.1.74.3.2.2,HP-ICF-UFD-MIB::hpicfUfdConfigGroup,,,,,,The collection of objects for UFD track entity. This group is mandatory.
.1.3.6.1.4.1.11.2.14.11.5.1.74.3.2.3,HP-ICF-UFD-MIB::hpicfUfdNotificationGroup,,,,,,The collection of objects for UFD notifications.
.1.3.6.1.4.1.11.2.14.11.5.1.75,HP-ICF-OID::hpSBMMIB,,,,,,
.1.3.6.1.4.1.11.2.14.11.5.1.76,HP-ICF-OID::hpicfLoadBalanceMod,,,,,,
.1.3.6.1.4.1.11.2.14.11.5.1.76.0,HP-LOADBALANCE-MIB::hpicfLoadBalanceNotifications,,,,,,
.1.3.6.1.4.1.11.2.14.11.5.1.76.1,HP-LOADBALANCE-MIB::hpicfLoadBalanceMethodMod,,,,,,
.1.3.6.1.4.1.11.2.14.11.5.1.76.1.1,HP-LOADBALANCE-MIB::hpicfTrunkLoadBalanceMethod,INTEGER,read-write,,current,l3based(1):l4based(2):l2based(3),Method to be used for Load Balancing.
.1.3.6.1.4.1.11.2.14.11.5.1.76.1.2,HP-LOADBALANCE-MIB::hpicfTrunkClearStatsTable,,not-accessible,,current,,This table is for resetting the statistics for the given trunk.
.1.3.6.1.4.1.11.2.14.11.5.1.76.1.2.1,HP-LOADBALANCE-MIB::hpicfTrunkClearStatsEntry,,not-accessible,hpicfTrunkId,current,,This entry is used to clear the statistics for the given trunk.
.1.3.6.1.4.1.11.2.14.11.5.1.76.1.2.1.1,HP-LOADBALANCE-MIB::hpicfTrunkId,Integer32,not-accessible,,current,,This object uniquely identifies the entry in this table.
.1.3.6.1.4.1.11.2.14.11.5.1.76.1.2.1.2,HP-LOADBALANCE-MIB::hpicfTrunkStatsClear,INTEGER,read-write,,current,true(1):false(2),This object is to clear the statistics for the trunk  identified by 'hpicfTrunkId'. Statistics counters will be  cleared when this object is set to 'true'.  This object will always returns 'false'.
.1.3.6.1.4.1.11.2.14.11.5.1.76.1.3,HP-LOADBALANCE-MIB::hpicfTrunkStatsTable,,not-accessible,,current,,A collection of statistics for the specified trunk.
.1.3.6.1.4.1.11.2.14.11.5.1.76.1.3.1,HP-LOADBALANCE-MIB::hpicfTrunkStatsEntry,,not-accessible,hpicfTrunkId,current,,A collection of statistics for the specified trunk.
.1.3.6.1.4.1.11.2.14.11.5.1.76.1.3.1.1,HP-LOADBALANCE-MIB::hpicfTrunkUpTime,Unsigned32,read-only,,current,,The time the trunk has been up or since the counters were reset.
.1.3.6.1.4.1.11.2.14.11.5.1.76.1.3.1.2,HP-LOADBALANCE-MIB::hpicfTrunkTotalBytesRx,Counter64,read-only,,current,,Total number of bytes received on this trunk.
.1.3.6.1.4.1.11.2.14.11.5.1.76.1.3.1.3,HP-LOADBALANCE-MIB::hpicfTrunkTotalBytesTx,Counter64,read-only,,current,,Total number of bytes transmitted on this trunk.
.1.3.6.1.4.1.11.2.14.11.5.1.76.1.3.1.4,HP-LOADBALANCE-MIB::hpicfTrunkTotalFramesRx,Counter64,read-only,,current,,Total number of frames received on this trunk.
.1.3.6.1.4.1.11.2.14.11.5.1.76.1.3.1.5,HP-LOADBALANCE-MIB::hpicfTrunkTotalFramesTx,Counter64,read-only,,current,,Total number of frames transmitted on this trunk.
.1.3.6.1.4.1.11.2.14.11.5.1.76.1.3.1.6,HP-LOADBALANCE-MIB::hpicfTrunkTotalDropsTx,Counter64,read-only,,current,,Total number of transmitted frames which were dropped  because the port was oversubscribed.
.1.3.6.1.4.1.11.2.14.11.5.1.76.1.4,HP-LOADBALANCE-MIB::hpicfTrunkPortStatsTable,,not-accessible,,current,,A collection of statistics for specified port of the trunk.
.1.3.6.1.4.1.11.2.14.11.5.1.76.1.4.1,HP-LOADBALANCE-MIB::hpicfTrunkPortStatsEntry,,not-accessible,hpicfTrunkId:ifIndex,current,,A collection of statistics for specified port of the trunk.
.1.3.6.1.4.1.11.2.14.11.5.1.76.1.4.1.1,HP-LOADBALANCE-MIB::hpicfTrunkPortBytesRx,Counter64,read-only,,current,,Total number of bytes received on the specified  port of the trunk.
.1.3.6.1.4.1.11.2.14.11.5.1.76.1.4.1.2,HP-LOADBALANCE-MIB::hpicfTrunkPortBytesTx,Counter64,read-only,,current,,Total number of bytes transmitted on the specified  port of the trunk.
.1.3.6.1.4.1.11.2.14.11.5.1.76.1.4.1.3,HP-LOADBALANCE-MIB::hpicfTrunkPortFramesRx,Counter64,read-only,,current,,Total number of frames received on the specified 
.1.3.6.1.4.1.11.2.14.11.5.1.76.1.4.1.4,HP-LOADBALANCE-MIB::hpicfTrunkPortFramesTx,Counter64,read-only,,current,,Total number of frames transmitted on the specified  port of the trunk.
.1.3.6.1.4.1.11.2.14.11.5.1.76.1.4.1.5,HP-LOADBALANCE-MIB::hpicfTrunkPortFramesDropTx,Counter64,read-only,,current,,Total number of transmitted frames which were dropped on the specified port of the trunk because of oversubscription.
.1.3.6.1.4.1.11.2.14.11.5.1.76.1.4.1.6,HP-LOADBALANCE-MIB::hpicfTrunkPortRxFramePercent,Unsigned32,read-only,,current,,Percentage of frames received by this specified port of the  trunk, calculated as the total number of frames received by  this port over the total number of frames received by all ports in the trunk group
.1.3.6.1.4.1.11.2.14.11.5.1.76.1.4.1.7,HP-LOADBALANCE-MIB::hpicfTrunkPortTxFramePercent,Unsigned32,read-only,,current,,Percentage of frames transmitted by this specified port of the trunk, calculated as the total number of frames  transmitted by this port over the total number of frames transmitted by all ports in the trunk group
.1.3.6.1.4.1.11.2.14.11.5.1.76.1.4.1.8,HP-LOADBALANCE-MIB::hpicfTrunkPortDropTxFramePercent,Unsigned32,read-only,,current,,Percentage of frames transmitted by this port that are dropped because of oversubscription, calculated as the total number of dropped frames in transmission over the total number of frames transmitted by the specified port of the trunk.
.1.3.6.1.4.1.11.2.14.11.5.1.76.1.5,HP-LOADBALANCE-MIB::hpicfLoadBalanceObjects,,,,,,
.1.3.6.1.4.1.11.2.14.11.5.1.76.1.5.1,HP-LOADBALANCE-MIB::hpicfLoadBalanceTable,,not-accessible,,current,,A table which gives the current egress port in the trunk  for the specific conversation.
.1.3.6.1.4.1.11.2.14.11.5.1.76.1.5.1.1,HP-LOADBALANCE-MIB::hpicfLoadBalanceEntry,,not-accessible,hpicfLoadBalanceIndex,current,,gives the current egress port in the trunk  for the specific conversation.
.1.3.6.1.4.1.11.2.14.11.5.1.76.1.5.1.1.1,HP-LOADBALANCE-MIB::hpicfLoadBalanceIndex,Integer32,not-accessible,,current,,The index which uniquely identifies a row in the table.
.1.3.6.1.4.1.11.2.14.11.5.1.76.1.5.1.1.2,HP-LOADBALANCE-MIB::hpicfLoadBalanceTrunkId,Integer32,read-create,,current,,Specifies the trunk index.
.1.3.6.1.4.1.11.2.14.11.5.1.76.1.5.1.1.3,HP-LOADBALANCE-MIB::hpicfLoadBalanceSourceMacAddr,OCTET,read-create,,current,,Specifies the source Mac address.
.1.3.6.1.4.1.11.2.14.11.5.1.76.1.5.1.1.4,HP-LOADBALANCE-MIB::hpicfLoadBalanceDestMacAddr,OCTET,read-create,,current,,Specifies the destination Mac address
.1.3.6.1.4.1.11.2.14.11.5.1.76.1.5.1.1.5,HP-LOADBALANCE-MIB::hpicfLoadBalanceIPSourceAddrType,INTEGER,read-create,,current,unknown(0):ipv4(1):ipv6(2):ipv4z(3):ipv6z(4):dns(16),Specifies the source IP address type.
.1.3.6.1.4.1.11.2.14.11.5.1.76.1.5.1.1.6,HP-LOADBALANCE-MIB::hpicfLoadBalanceIPSourceAddr,OCTET,read-create,,current,,Specifies the source IP address.
.1.3.6.1.4.1.11.2.14.11.5.1.76.1.5.1.1.7,HP-LOADBALANCE-MIB::hpicfLoadBalanceIPDestAddrType,INTEGER,read-create,,current,unknown(0):ipv4(1):ipv6(2):ipv4z(3):ipv6z(4):dns(16),Specifies the destination IP address type.
.1.3.6.1.4.1.11.2.14.11.5.1.76.1.5.1.1.8,HP-LOADBALANCE-MIB::hpicfLoadBalanceIPDestAddr,OCTET,read-create,,current,,Specifies the destination IP address.
.1.3.6.1.4.1.11.2.14.11.5.1.76.1.5.1.1.9,HP-LOADBALANCE-MIB::hpicfLoadBalanceSourcePort,Integer32,read-create,,current,,Specifies the TCP/UDP source port.
.1.3.6.1.4.1.11.2.14.11.5.1.76.1.5.1.1.10,HP-LOADBALANCE-MIB::hpicfLoadBalanceDestPort,Integer32,read-create,,current,,Specifies the TCP/UDP destination port.
.1.3.6.1.4.1.11.2.14.11.5.1.76.1.5.1.1.11,HP-LOADBALANCE-MIB::hpicfLoadBalanceEtherType,Integer32,read-create,,current,,Specifies the ether-type of the packet.
.1.3.6.1.4.1.11.2.14.11.5.1.76.1.5.1.1.12,HP-LOADBALANCE-MIB::hpicfLoadBalanceInboundVlan,Integer32,read-create,,current,,Specifies the inbound VLAN of the packet.
.1.3.6.1.4.1.11.2.14.11.5.1.76.1.5.1.1.13,HP-LOADBALANCE-MIB::hpicfLoadBalanceInboundPort,Integer32,read-create,,current,,Specifies the inbound port of the packet.
.1.3.6.1.4.1.11.2.14.11.5.1.76.1.5.1.1.14,HP-LOADBALANCE-MIB::hpicfLoadBalanceOutboundPort,Integer32,read-only,,current,,Specifies the port on which the specified stream  with given source and destination information will be  forwarded out.
.1.3.6.1.4.1.11.2.14.11.5.1.76.1.5.1.1.15,HP-LOADBALANCE-MIB::hpicfLoadBalanceStatus,INTEGER,read-create,,current,active(1):notInService(2):notReady(3):createAndGo(4):createAndWait(5):destroy(6),Status of the load balance entry.
.1.3.6.1.4.1.11.2.14.11.5.1.76.2,HP-LOADBALANCE-MIB::hpicfLoadBalanceConformance,,,,,,
.1.3.6.1.4.1.11.2.14.11.5.1.76.2.1,HP-LOADBALANCE-MIB::hpicfLoadBalanceCompliances,,,,,,
.1.3.6.1.4.1.11.2.14.11.5.1.76.2.1.1,HP-LOADBALANCE-MIB::hpicfLoadBalanceCompliance,,,,,,The compliance statement for devices implementing the hpicfLoadBalanceMethodMod MIB.
.1.3.6.1.4.1.11.2.14.11.5.1.76.2.1.2,HP-LOADBALANCE-MIB::hpicfTrunkStatsCompliance,,,,,,The compliance statement for devices implementing the statistics of the trunk and trunk port.
.1.3.6.1.4.1.11.2.14.11.5.1.76.2.2,HP-LOADBALANCE-MIB::hpicfLoadBalanceGroups,,,,,,
.1.3.6.1.4.1.11.2.14.11.5.1.76.2.2.1,HP-LOADBALANCE-MIB::hpicfLoadBalanceGroup,,,,,,A collection of objects for selecting a load balancing method to use.
.1.3.6.1.4.1.11.2.14.11.5.1.76.2.2.2,HP-LOADBALANCE-MIB::hpicfTrunkStatsClearGroup,,,,,,A collection of objects for clearing the statistics.
.1.3.6.1.4.1.11.2.14.11.5.1.76.2.2.3,HP-LOADBALANCE-MIB::hpicfTrunkStatsGroup,,,,,,A collection of objects for trunk statistics.
.1.3.6.1.4.1.11.2.14.11.5.1.76.2.2.4,HP-LOADBALANCE-MIB::hpicfTrunkPortStatsGroup,,,,,,A collection of objects for statistics of a specified port of a trunk.
.1.3.6.1.4.1.11.2.14.11.5.1.76.2.2.5,HP-LOADBALANCE-MIB::hpicfLoadBalanceGroup5,,,,,, 
.1.3.6.1.4.1.11.2.14.11.5.1.77,HP-ICF-OID::hpTunnelMIB,,,,,,
.1.3.6.1.4.1.11.2.14.11.5.1.77.0,HP-TUNNEL-MIB::hpTunnelNotifications,,,,,,
.1.3.6.1.4.1.11.2.14.11.5.1.77.1,HP-TUNNEL-MIB::hpTunnelObjects,,,,,,
.1.3.6.1.4.1.11.2.14.11.5.1.77.1.1,HP-TUNNEL-MIB::hpTunnelConfigTable,,not-accessible,,current,,This table is used to provision a tunnel without  having to configure the source and destination  endpoints of the tunnel.
.1.3.6.1.4.1.11.2.14.11.5.1.77.1.1.1,HP-TUNNEL-MIB::hpTunnelConfigEntry,,not-accessible,hpTunnelID,current,,A set of objects that are used to create a tunnel.
.1.3.6.1.4.1.11.2.14.11.5.1.77.1.1.1.1,HP-TUNNEL-MIB::hpTunnelID,Integer32,not-accessible,,current,,An identifier to configure the tunnel.
.1.3.6.1.4.1.11.2.14.11.5.1.77.1.1.1.2,HP-TUNNEL-MIB::hpTunnelIfIndex,Integer32,read-only,,current,,The interface index associated with this tunnel  entry.
.1.3.6.1.4.1.11.2.14.11.5.1.77.1.1.1.3,HP-TUNNEL-MIB::hpTunnelRowStatus,INTEGER,read-create,,current,active(1):notInService(2):notReady(3):createAndGo(4):createAndWait(5):destroy(6),The status of this row, by which new entries may be created, or old entries deleted from this table.
.1.3.6.1.4.1.11.2.14.11.5.1.77.1.2,HP-TUNNEL-MIB::hpTunnelIfTable,,not-accessible,,current,,This table augments the tunnelIfTable.
.1.3.6.1.4.1.11.2.14.11.5.1.77.1.2.1,HP-TUNNEL-MIB::hpTunnelIfEntry,,not-accessible,,current,,A set of objects as an augment to tunnelIfTable.
.1.3.6.1.4.1.11.2.14.11.5.1.77.1.2.1.3,HP-TUNNEL-MIB::hpTunnelIfMTU,Unsigned32,read-write,,current,,The size of the largest packet which can be  sent/received on the interface, specified in  octets. For interfaces that are used for  transmitting network datagrams, this is the size  of the largest network datagram that can be sent  on this interface.
.1.3.6.1.4.1.11.2.14.11.5.1.77.1.2.1.4,HP-TUNNEL-MIB::hpTunnelEncapsMethod,INTEGER,read-write,,current,unspecified(1):direct4in4(2):direct6in4(3):direct6in4Ipsec(4):direct6in6(5):ipsecIpv4(6):ipsecIpv6(7),The encapsulation method used by the tunnel.
.1.3.6.1.4.1.11.2.14.11.5.1.77.1.3,HP-TUNNEL-MIB::hpTunnelInetConfigTable,,not-accessible,,current,,This table augments the tunnelInetConfigTable.
.1.3.6.1.4.1.11.2.14.11.5.1.77.1.3.1,HP-TUNNEL-MIB::hpTunnelInetConfigEntry,,not-accessible,,current,,A set of objects as an augment to tunnelInetConfigTable.
.1.3.6.1.4.1.11.2.14.11.5.1.77.1.3.1.1,HP-TUNNEL-MIB::hpTunnelInetConfigEncapsMethod,INTEGER,read-write,,current,unspecified(1):direct4in4(2):direct6in4(3):direct6in4Ipsec(4):direct6in6(5):ipsecIpv4(6):ipsecIpv6(7),The encapsulation method used by this tunnel.
.1.3.6.1.4.1.11.2.14.11.5.1.77.2,HP-TUNNEL-MIB::hpTunnelConformance,,,,,,
.1.3.6.1.4.1.11.2.14.11.5.1.77.2.1,HP-TUNNEL-MIB::hpTunnelMIBCompliances,,,,,,
.1.3.6.1.4.1.11.2.14.11.5.1.77.2.1.1,HP-TUNNEL-MIB::hpTunnelMIBCompliance,,,,,,The compliance statement for the HP Tunnel MIB.
.1.3.6.1.4.1.11.2.14.11.5.1.77.2.2,HP-TUNNEL-MIB::hpTunnelMIBGroups,,,,,,
.1.3.6.1.4.1.11.2.14.11.5.1.77.2.2.1,HP-TUNNEL-MIB::hpTunnelProvisionGroup,,,,,,A collection of objects to support creation of  a tunnel.
.1.3.6.1.4.1.11.2.14.11.5.1.77.2.2.2,HP-TUNNEL-MIB::hpTunnelInetConfigGroup,,,,,,A collection of objects to augment  tunnelInetConfigTable.
.1.3.6.1.4.1.11.2.14.11.5.1.78,HP-SWITCH-FIPS-MIB::hpSwitchFipSnoopingMib,,,,,,This MIB module describes objects for management of FIP (FCoE Initialization Protocol) snooping in the HP Integrated Communication Facility product  line.
.1.3.6.1.4.1.11.2.14.11.5.1.78.1,HP-SWITCH-FIPS-MIB::hpSwitchFipsConfigObjects,,,,,,
.1.3.6.1.4.1.11.2.14.11.5.1.78.1.1,HP-SWITCH-FIPS-MIB::hpSwitchFipsScalars,,,,,,
.1.3.6.1.4.1.11.2.14.11.5.1.78.1.1.1,HP-SWITCH-FIPS-MIB::hpSwitchFipsAdminStatus,INTEGER,read-write,,current,enable(1):disable(2),This object is used to enable or disable FIP Snooping on an ethernet bridge.
.1.3.6.1.4.1.11.2.14.11.5.1.78.1.2,HP-SWITCH-FIPS-MIB::hpSwitchFipsTables,,,,,,
.1.3.6.1.4.1.11.2.14.11.5.1.78.1.2.1,HP-SWITCH-FIPS-MIB::hpSwitchFipsFcMapTable,,not-accessible,,current,,This table is used to configure the list of FC-MAP values. These FC-MAPS will be used to program ACLs that ensure no MAC Address used for non-FCoE traffic shall have the prefix(first 3 bytes) equal to any of the FC-MAP value.
.1.3.6.1.4.1.11.2.14.11.5.1.78.1.2.1.1,HP-SWITCH-FIPS-MIB::hpSwitchFipsFcMapEntry,,not-accessible,hpSwitchFipsFcMapIndex,current,,An entry in the table specifying the FC-MAP.
.1.3.6.1.4.1.11.2.14.11.5.1.78.1.2.1.1.1,HP-SWITCH-FIPS-MIB::hpSwitchFipsFcMapIndex,Integer32,not-accessible,,current,,The index of the Fiber Channel MAC Address prefix table.
.1.3.6.1.4.1.11.2.14.11.5.1.78.1.2.1.1.2,HP-SWITCH-FIPS-MIB::hpSwitchFipsFcMap,OCTET,read-write,,current,,This object configures the FC MAP value associated with the FIP snooping bridge
.1.3.6.1.4.1.11.2.14.11.5.1.78.1.2.2,HP-SWITCH-FIPS-MIB::hpSwitchFipsFcfMacAddressTable,,not-accessible,,current,,This table is used to configure the list of FCF MAC addresses to which ENodes will perform FIP FLOGI and FIP NPIV FDISC operations. This table will be indexed by the VLAN ID. Appropriate ACL entries will be programmed to allow FCoE traffic to these MACs.
.1.3.6.1.4.1.11.2.14.11.5.1.78.1.2.2.1,HP-SWITCH-FIPS-MIB::hpSwitchFipsFcfMacAddressEntry,,not-accessible,hpSwitchFipsVirtualFabricInterfaceIndex:hpSwitchFipsFcfMacAddress,current,,An entry in the table specifying the FCF MAC connected to the Virtual Fabric (VF) interface.
.1.3.6.1.4.1.11.2.14.11.5.1.78.1.2.2.1.1,HP-SWITCH-FIPS-MIB::hpSwitchFipsVirtualFabricInterfaceIndex,Integer32,not-accessible,,current,,Interface index of the VF port connected to FCF
.1.3.6.1.4.1.11.2.14.11.5.1.78.1.2.2.1.2,HP-SWITCH-FIPS-MIB::hpSwitchFipsFcfMacAddress,OCTET,not-accessible,,current,,This object configures the MAC address of the Fibre Channel Forwarder(FCF) attached to the VF port accepting Fabric logins. This MAC Address will be used as the DA MAC by Enodes requesting FLOGI or NPIV FDISC.Configuring this MAC address will result in some ACL rules to be programmed in the hardware.
.1.3.6.1.4.1.11.2.14.11.5.1.78.1.2.2.1.3,HP-SWITCH-FIPS-MIB::hpSwitchFipsFcoeVlanId,Integer32,read-only,,current,,The FCoE VLAN ID advertised by FCF
.1.3.6.1.4.1.11.2.14.11.5.1.78.1.2.2.1.4,HP-SWITCH-FIPS-MIB::hpSwitchFipsFcfFcMap,OCTET,read-only,,current,,The Fiber Channel MAC address prefix used by the FCF to assign fabric provided MAC addresses(FPMA).
.1.3.6.1.4.1.11.2.14.11.5.1.78.1.2.2.1.5,HP-SWITCH-FIPS-MIB::hpSwitchFipsFcfEnodeLoginCount,Integer32,read-only,,current,,This objects represents the number of Enodes that have logged into this FCF.
.1.3.6.1.4.1.11.2.14.11.5.1.78.1.2.2.1.6,HP-SWITCH-FIPS-MIB::hpSwitchFipsFcfNameId,OCTET,read-only,,current,,The World Wide Node Name of the fabric port as advertised by the FCF.
.1.3.6.1.4.1.11.2.14.11.5.1.78.1.2.2.1.7,HP-SWITCH-FIPS-MIB::hpSwitchFipsFabricName,OCTET,read-only,,current,,The Fabric name identifier of Fabric as advertised by FCF.
.1.3.6.1.4.1.11.2.14.11.5.1.78.1.2.2.1.8,HP-SWITCH-FIPS-MIB::hpSwitchFipsFcfMacTableRowStatus,INTEGER,read-create,,current,active(1):notInService(2):notReady(3):createAndGo(4):createAndWait(5):destroy(6),Row Status of the FCF MAC Address table.
.1.3.6.1.4.1.11.2.14.11.5.1.78.1.2.3,HP-SWITCH-FIPS-MIB::hpSwitchFipsSessionTable,,not-accessible,,current,,This table stores the currently active FLOGI or NPIV FDISC sessions. This table is meant for reporting only.
.1.3.6.1.4.1.11.2.14.11.5.1.78.1.2.3.1,HP-SWITCH-FIPS-MIB::hpSwitchFipsSessionEntry,,not-accessible,hpSwitchFipsSessEnodeInterfaceIndex:hpSwitchFipsSessEnodeFPMAMacAddress,current,,An entry in the table specifying the details pertaing to a session.
.1.3.6.1.4.1.11.2.14.11.5.1.78.1.2.3.1.1,HP-SWITCH-FIPS-MIB::hpSwitchFipsSessEnodeInterfaceIndex,Integer32,not-accessible,,current,,The object specifies the interface index connected to the Enode initiator.
.1.3.6.1.4.1.11.2.14.11.5.1.78.1.2.3.1.2,HP-SWITCH-FIPS-MIB::hpSwitchFipsSessEnodeFPMAMacAddress,OCTET,not-accessible,,current,,The Fabric provided MAC Address of the Enode. This MAC is assigned by FCF as a result of succcessful FLOGI or NPIV  FDISC and is used as the SA MAC for FCoE traffic originating  from Enode.
.1.3.6.1.4.1.11.2.14.11.5.1.78.1.2.3.1.3,HP-SWITCH-FIPS-MIB::hpSwitchFipsSessEnodeMacAddress,OCTET,read-only,,current,,This object represents the server provided MAC address of the Enode. This MAC is used as the SA MAC in FIP frames originating from Enode.
.1.3.6.1.4.1.11.2.14.11.5.1.78.1.2.3.1.4,HP-SWITCH-FIPS-MIB::hpSwitchFipsSessEnodeNportId,OCTET,read-only,,current,,This object represents the N_Port ID of the Enode. It is assigned by the FCF after a successful FLOGI or NPIV FDISC. It is equivalent to FC ID in native Fibre channel. This ID is used in the S_ID or D_ID fields of the encapsulated Fibre Channel Frames.
.1.3.6.1.4.1.11.2.14.11.5.1.78.1.2.3.1.5,HP-SWITCH-FIPS-MIB::hpSwitchFipsSessEnodeNportIdType,INTEGER,read-only,,current,flogi(1):npivfdisc(2),This object represents the method by which N_Port obtained the FC ID from FCF.
.1.3.6.1.4.1.11.2.14.11.5.1.78.1.2.3.1.6,HP-SWITCH-FIPS-MIB::hpSwitchFipsSessFcfMacAddress,OCTET,read-only,,current,,This object represents the MAC Address of the Fibre Channel Forwarder to which the session is established.
.1.3.6.1.4.1.11.2.14.11.5.1.78.1.2.3.1.7,HP-SWITCH-FIPS-MIB::hpSwitchFipsSessFcMap,OCTET,read-only,,current,,This object represents the FC MAP.
.1.3.6.1.4.1.11.2.14.11.5.1.78.1.2.3.1.8,HP-SWITCH-FIPS-MIB::hpSwitchFipsSessVlanId,Integer32,read-only,,current,,The VLAN ID on which FCoE traffic is being pumped.
.1.3.6.1.4.1.11.2.14.11.5.1.78.1.2.3.1.9,HP-SWITCH-FIPS-MIB::hpSwitchFipsSessFcfNameId,OCTET,read-only,,current,,The Name Identifier advertised by the FCF with which this session is established.
.1.3.6.1.4.1.11.2.14.11.5.1.78.2,HP-SWITCH-FIPS-MIB::hpSwitchFipsStatistics,,,,,,
.1.3.6.1.4.1.11.2.14.11.5.1.78.2.1,HP-SWITCH-FIPS-MIB::hpSwitchFipsGlobalStats,,,,,,
.1.3.6.1.4.1.11.2.14.11.5.1.78.2.1.1,HP-SWITCH-FIPS-MIB::hpSwitchFipsFipDropPkts,Counter64,read-only,,current,,Global counter to indicate the number of FIP frames dropped.
.1.3.6.1.4.1.11.2.14.11.5.1.78.2.1.2,HP-SWITCH-FIPS-MIB::hpSwitchFipsFcoeDropPkts,Counter64,read-only,,current,,Global counter to indicate the number of FCoE frames dropped.
.1.3.6.1.4.1.11.2.14.11.5.1.78.2.2,HP-SWITCH-FIPS-MIB::hpSwitchFipsSessStats,,,,,,
.1.3.6.1.4.1.11.2.14.11.5.1.78.2.2.1,HP-SWITCH-FIPS-MIB::hpSwitchFipsSessStatsTable,,not-accessible,,current,,A table for per session FIPs statistics.
.1.3.6.1.4.1.11.2.14.11.5.1.78.2.2.1.1,HP-SWITCH-FIPS-MIB::hpSwitchFipsSessStatsEntry,,not-accessible,hpSwitchFipsStatsSessEnodeIfIndex:hpSwitchFipsStatsSessFPMAMacAddress,current,,An Entry in the session statistics table.
.1.3.6.1.4.1.11.2.14.11.5.1.78.2.2.1.1.1,HP-SWITCH-FIPS-MIB::hpSwitchFipsStatsSessEnodeIfIndex,Integer32,not-accessible,,current,,Interface index of the Enode.
.1.3.6.1.4.1.11.2.14.11.5.1.78.2.2.1.1.2,HP-SWITCH-FIPS-MIB::hpSwitchFipsStatsSessFPMAMacAddress,OCTET,not-accessible,,current,,FPMA Mac address being used for this session.
.1.3.6.1.4.1.11.2.14.11.5.1.78.2.2.1.1.3,HP-SWITCH-FIPS-MIB::hpSwitchFipsStatsSessFcfMacAddress,OCTET,read-only,,current,,FCF Mac address being used for this session.
.1.3.6.1.4.1.11.2.14.11.5.1.78.2.2.1.1.4,HP-SWITCH-FIPS-MIB::hpSwitchFipsStatsSessFcoePermitPkts,Counter64,read-only,,current,,Counter indicating the number of FCoE frames  permitted for this session.
.1.3.6.1.4.1.11.2.14.11.5.1.78.3,HP-SWITCH-FIPS-MIB::hpSwitchFipsConformance,,,,,,
.1.3.6.1.4.1.11.2.14.11.5.1.78.3.1,HP-SWITCH-FIPS-MIB::hpSwitchFipsCompliances,,,,,,
.1.3.6.1.4.1.11.2.14.11.5.1.78.3.1.1,HP-SWITCH-FIPS-MIB::hpSwitchFipsCompliance,,,,,,The compliance statement for SNMP entities which implement the FIP Snooping MIB.
.1.3.6.1.4.1.11.2.14.11.5.1.78.3.2,HP-SWITCH-FIPS-MIB::hpSwitchFipsGroups,,,,,,
.1.3.6.1.4.1.11.2.14.11.5.1.78.3.2.1,HP-SWITCH-FIPS-MIB::hpSwitchFipsConfigGroup,,,,,,The collection of objects for Fip Snooping configuration.
.1.3.6.1.4.1.11.2.14.11.5.1.78.3.2.2,HP-SWITCH-FIPS-MIB::hpSwitchFipsSessionGroup,,,,,,The collection of objects representing the FIP sessions.
.1.3.6.1.4.1.11.2.14.11.5.1.78.3.2.3,HP-SWITCH-FIPS-MIB::hpSwitchFipsStatisticsGroup,,,,,,The collection of objects representing the FIP Statistics.
.1.3.6.1.4.1.11.2.14.11.5.1.79,HP-ICF-OID::hpicfTcpMib,,,,,,
.1.3.6.1.4.1.11.2.14.11.5.1.79.1,HPTCP-MIB::hpTcpObjects,,,,,,
.1.3.6.1.4.1.11.2.14.11.5.1.79.1.1,HPTCP-MIB::hpTcpOutRstsWithAck,Counter32,read-only,,current,,The number of TCP packets  sent containing the RST and the ACK flags.  This is useful to detect SYN packets sent  to closed ports.
.1.3.6.1.4.1.11.2.14.11.5.1.79.2,HPTCP-MIB::hpTcpConformance,,,,,,
.1.3.6.1.4.1.11.2.14.11.5.1.79.2.1,HPTCP-MIB::hpTcpGroups,,,,,,
.1.3.6.1.4.1.11.2.14.11.5.1.79.2.1.1,HPTCP-MIB::hpTcpBaseGroup,,,,,,A collection of proprietary objects for monitoring the TCP connections.
.1.3.6.1.4.1.11.2.14.11.5.1.79.2.2,HPTCP-MIB::hpTcpCompliances,,,,,,
.1.3.6.1.4.1.11.2.14.11.5.1.79.2.2.1,HPTCP-MIB::hpTcpCompliance,,,,,,The compliance statement for HP switches that support Dynamic ARP Protection.
.1.3.6.1.4.1.11.2.14.11.5.1.82,HP-ICF-OID::hpicfTransceiverMIB,,,,,,
.1.3.6.1.4.1.11.2.14.11.5.1.82.1,HP-ICF-TRANSCEIVER-MIB::hpicfXcvrObjects,,,,,,
.1.3.6.1.4.1.11.2.14.11.5.1.82.1.1,HP-ICF-TRANSCEIVER-MIB::hpicfXcvrInfo,,,,,,
.1.3.6.1.4.1.11.2.14.11.5.1.82.1.1.1,HP-ICF-TRANSCEIVER-MIB::hpicfXcvrInfoTable,,not-accessible,,current,,A table of objects that display transceiver characteristics.
.1.3.6.1.4.1.11.2.14.11.5.1.82.1.1.1.1,HP-ICF-TRANSCEIVER-MIB::hpicfXcvrInfoEntry,,not-accessible,ifIndex,current,,A set of objects that displays information of a transceiver.
.1.3.6.1.4.1.11.2.14.11.5.1.82.1.1.1.1.1,HP-ICF-TRANSCEIVER-MIB::hpicfXcvrPortIndex,Integer32,read-only,,current,,The interface number for this entry.
.1.3.6.1.4.1.11.2.14.11.5.1.82.1.1.1.1.2,HP-ICF-TRANSCEIVER-MIB::hpicfXcvrPortDesc,OCTET,read-only,,current,,A textual description of the interface.
.1.3.6.1.4.1.11.2.14.11.5.1.82.1.1.1.1.3,HP-ICF-TRANSCEIVER-MIB::hpicfXcvrModel,OCTET,read-only,,current,,A textual description of the transceiver model number.
.1.3.6.1.4.1.11.2.14.11.5.1.82.1.1.1.1.4,HP-ICF-TRANSCEIVER-MIB::hpicfXcvrSerial,OCTET,read-only,,current,,A textual description of the transceiver serial number.
.1.3.6.1.4.1.11.2.14.11.5.1.82.1.1.1.1.5,HP-ICF-TRANSCEIVER-MIB::hpicfXcvrType,OCTET,read-only,,current,,A textual description of the transceiver type.
.1.3.6.1.4.1.11.2.14.11.5.1.82.1.1.1.1.6,HP-ICF-TRANSCEIVER-MIB::hpicfXcvrConnectorType,OCTET,read-only,,current,,A textual description of the transceiver connector type.
.1.3.6.1.4.1.11.2.14.11.5.1.82.1.1.1.1.7,HP-ICF-TRANSCEIVER-MIB::hpicfXcvrWavelength,OCTET,read-only,,current,,A textual description of the central optical wavelength. n/a will be reported for copper transceivers.
.1.3.6.1.4.1.11.2.14.11.5.1.82.1.1.1.1.8,HP-ICF-TRANSCEIVER-MIB::hpicfXcvrTxDist,OCTET,read-only,,current,,A textual description of the link length supported by the transceiver.
.1.3.6.1.4.1.11.2.14.11.5.1.82.1.1.1.1.9,HP-ICF-TRANSCEIVER-MIB::hpicfXcvrDiagnostics,INTEGER,read-only,,current,none(0):dom(1):vct(2):other(3),This object indicates transceiver diagnostic support. May be one of Virtual Cable Test (VCT), Diagnostic  Optical Monitoring (DOM), other or none.
.1.3.6.1.4.1.11.2.14.11.5.1.82.1.1.1.1.10,HP-ICF-TRANSCEIVER-MIB::hpicfXcvrDiagnosticsUpdate,INTEGER,read-write,,current,true(1):false(2),This object will cause specific actions depending on the diagnostic support of the transceiver. Transceiver Diagnostic support: None : No action taken. DOM : Will update diagnostic information for the transceiver. VCT : Will update diagnostic information for the transceiver. Other : Vendor specific. The value of the object will be reset after the completion of the update. Please note: VCT and other (cable-diagnostics) may cause a loss of link and take a few second to run for each interface.
.1.3.6.1.4.1.11.2.14.11.5.1.82.1.1.1.1.11,HP-ICF-TRANSCEIVER-MIB::hpicfXcvrTemp,Integer32,read-only,,current,,This is transceiver internal temperature in thousandths of degrees Celsius. As an example: 49120 is 49.120 degrees Celsius. The value of this object is valid when the value of  the hpicfXcvrDiagnostics object is DOM.
.1.3.6.1.4.1.11.2.14.11.5.1.82.1.1.1.1.12,HP-ICF-TRANSCEIVER-MIB::hpicfXcvrVoltage,Unsigned32,read-only,,current,,This is transceiver supply voltage in hundreds of microvolts. As an example: 32928 is 3.2928 volts. Will be zero if the transceiver does not report this object. The value of this object is valid when the value of  the hpicfXcvrDiagnostics object is DOM.
.1.3.6.1.4.1.11.2.14.11.5.1.82.1.1.1.1.13,HP-ICF-TRANSCEIVER-MIB::hpicfXcvrBias,Unsigned32,read-only,,current,,This is Tx bias current in microamps. The value of this object is valid when the value of  the hpicfXcvrDiagnostics object is DOM.
.1.3.6.1.4.1.11.2.14.11.5.1.82.1.1.1.1.14,HP-ICF-TRANSCEIVER-MIB::hpicfXcvrTxPower,Integer32,read-only,,current,,This is transmit output power in thousandths of dBm. As an example: -5840 is -5.840dBm. -in dBm (0 microwatts) will be reported as -99999999. The value of this object is valid when the value of  the hpicfXcvrDiagnostics object is DOM.
.1.3.6.1.4.1.11.2.14.11.5.1.82.1.1.1.1.15,HP-ICF-TRANSCEIVER-MIB::hpicfXcvrRxPower,Integer32,read-only,,current,,This is received optical power in thousandths of dBm. As an example: -5840 is -5.840dBm. -in dBm (0 microwatts) will be reported as -99999999. The value of this object is valid when the value of  the hpicfXcvrDiagnostics object is DOM.
.1.3.6.1.4.1.11.2.14.11.5.1.82.1.1.1.1.16,HP-ICF-TRANSCEIVER-MIB::hpicfXcvrAlarms,BITS,read-only,,current,rxPowerLowWarning(0):rxPowerHighWarning(1):txPowerLowWarning(2):txPowerHighWarning(3):txBiasLowWarning(4):txBiasHighWarning(5):vccLowWarning(6):vccHighWarning(7):tempLowWarning(8):tempHighWarning(9):rxPowerLowAlarm(10):rxPowerHighAlarm(11):txPowerLowAlarm(12):txPowerHighAlarm(13):txBiasLowAlarm(14):txBiasHighAlarm(15):vccLowAlarm(16):vccHighAlarm(17):tempLowAlarm(18):tempHighAlarm(19),Bitmask indicating transceiver alarms, Rx power low warning(0) Rx power high warning(1) Tx power low warning(2) Tx power high warning(3) Tx bias low warning(4) Tx bias high warning(5) Vcc low warning(6) Vcc high warning(7) Temp low warning(8) Temp high warning(9) Rx power low alarm(10) Rx power high alarm(11) Tx power low alarm(12) Tx power high alarm(13) Tx bias low alarm(14) Tx bias high alarm(15) Vcc low alarm(16) Vcc high alarm(17) Temp low alarm(18) Temp high alarm(19)  Unused(20-31) The value of this object is valid when the value of  the hpicfXcvrDiagnostics object is DOM.
.1.3.6.1.4.1.11.2.14.11.5.1.82.1.1.1.1.17,HP-ICF-TRANSCEIVER-MIB::hpicfXcvrErrors,BITS,read-only,,current,xcvrIOError(0):xcvrChecksum(1):xcvrTypeAndPortConfigMismatch(2):xcvrTypeNotSupported(3):wisLocalFault(4):rcvOpticalPowerFault(5):pmapmdReceiverLocalFault(6):pcsReceiveLocalFault(7):phyXSReceiveLocalFault(8):laserBiasCurrentFault(9):laserTemperatureFault(10):laserOutputPowerFault(11):txFault(12):pmapmdTransmitterLocalFault(13):pcsTransmitLocalFault(14):phyXSTransmitLocalFault(15):rxLossOfSignal(16),Bitmask indicating transceiver errors. Transceiver information I/O error(0) Transceiver information checksum error(1) Transceiver type and port configuration mismatch(2) Transceiver type not supported by port hardware(3) WIS local fault(4) Receive optical power fault(5) PMA/PMD receiver local fault(6) PCS receive local fault(7) PHY XS receive local fault(8) Laser bias current fault(9) Laser temperature fault(10) Laser output power fault(11) TX fault(12) PMA/PMD transmitter local fault(13) PCS transmit local fault(14) PHY XS Transmit Local Fault(15) RX loss of signal(16) Unused(17-31) The value of this object is valid when the value of  the hpicfXcvrDiagnostics object is DOM.
.1.3.6.1.4.1.11.2.14.11.5.1.82.1.1.1.1.18,HP-ICF-TRANSCEIVER-MIB::hpicfXcvrTempHiAlarm,Integer32,read-only,,current,,Transceiver temperature high alarm threshold limit in thousandths of degrees Celsius. As an example: 49120 is 49.120 degrees Celsius. The value of this object is valid when the value of  the hpicfXcvrDiagnostics object is DOM.
.1.3.6.1.4.1.11.2.14.11.5.1.82.1.1.1.1.19,HP-ICF-TRANSCEIVER-MIB::hpicfXcvrTempLoAlarm,Integer32,read-only,,current,,Transceiver temperature low alarm threshold limit in thousandths of degrees Celsius. As an example: 49120 is 49.120 degrees Celsius. The value of this object is valid when the value of  the hpicfXcvrDiagnostics object is DOM.
.1.3.6.1.4.1.11.2.14.11.5.1.82.1.1.1.1.20,HP-ICF-TRANSCEIVER-MIB::hpicfXcvrTempHiWarn,Integer32,read-only,,current,,Transceiver temperature high warning threshold limit in thousandths of degrees Celsius. As an example: 49120 is 49.120 degrees Celsius. The value of this object is valid when the value of  the hpicfXcvrDiagnostics object is DOM.
.1.3.6.1.4.1.11.2.14.11.5.1.82.1.1.1.1.21,HP-ICF-TRANSCEIVER-MIB::hpicfXcvrTempLoWarn,Integer32,read-only,,current,,Transceiver temperature low warning threshold limit in thousandths of degrees Celsius. As an example: 49120 is 49.120 degrees Celsius. The value of this object is valid when the value of  the hpicfXcvrDiagnostics object is DOM.
.1.3.6.1.4.1.11.2.14.11.5.1.82.1.1.1.1.22,HP-ICF-TRANSCEIVER-MIB::hpicfXcvrVccHiAlarm,Unsigned32,read-only,,current,,Transceiver VCC high alarm threshold limit in hundreds of microvolts. As an example: 32928 is 3.2928 volts. Returns zero if not supported on the transceiver. The value of this object is valid when the value of  the hpicfXcvrDiagnostics object is DOM.
.1.3.6.1.4.1.11.2.14.11.5.1.82.1.1.1.1.23,HP-ICF-TRANSCEIVER-MIB::hpicfXcvrVccLoAlarm,Unsigned32,read-only,,current,,Transceiver VCC low alarm threshold limit in hundreds of microvolts. As an example: 32928 is 3.2928 volts. Returns zero if not supported on the transceiver. The value of this object is valid when the value of  the hpicfXcvrDiagnostics object is DOM.
.1.3.6.1.4.1.11.2.14.11.5.1.82.1.1.1.1.24,HP-ICF-TRANSCEIVER-MIB::hpicfXcvrVccHiWarn,Unsigned32,read-only,,current,,Transceiver VCC high warning threshold limit in hundreds of microvolts. As an example: 32928 is 3.2928 volts. Returns zero if not supported on the transceiver. The value of this object is valid when the value of  the hpicfXcvrDiagnostics object is DOM.
.1.3.6.1.4.1.11.2.14.11.5.1.82.1.1.1.1.25,HP-ICF-TRANSCEIVER-MIB::hpicfXcvrVccLoWarn,Unsigned32,read-only,,current,,Transceiver VCC low warning threshold limit in hundreds of microvolts. As an example: 32928 is 3.2928 volts. Returns zero if not supported on the transceiver. The value of this object is valid when the value of  the hpicfXcvrDiagnostics object is DOM.
.1.3.6.1.4.1.11.2.14.11.5.1.82.1.1.1.1.26,HP-ICF-TRANSCEIVER-MIB::hpicfXcvrBiasHiAlarm,Unsigned32,read-only,,current,,Transceiver bias high alarm threshold limit in microamps. The value of this object is valid when the value of  the hpicfXcvrDiagnostics object is DOM.
.1.3.6.1.4.1.11.2.14.11.5.1.82.1.1.1.1.27,HP-ICF-TRANSCEIVER-MIB::hpicfXcvrBiasLoAlarm,Unsigned32,read-only,,current,,Transceiver bias low alarm threshold limit in microamps. The value of this object is valid when the value of  the hpicfXcvrDiagnostics object is DOM.
.1.3.6.1.4.1.11.2.14.11.5.1.82.1.1.1.1.28,HP-ICF-TRANSCEIVER-MIB::hpicfXcvrBiasHiWarn,Unsigned32,read-only,,current,,Transceiver bias high warning threshold limit in microamps. The value of this object is valid when the value of  the hpicfXcvrDiagnostics object is DOM.
.1.3.6.1.4.1.11.2.14.11.5.1.82.1.1.1.1.29,HP-ICF-TRANSCEIVER-MIB::hpicfXcvrBiasLoWarn,Unsigned32,read-only,,current,,Transceiver bias low warning threshold limit in microamps. The value of this object is valid when the value of  the hpicfXcvrDiagnostics object is DOM.
.1.3.6.1.4.1.11.2.14.11.5.1.82.1.1.1.1.30,HP-ICF-TRANSCEIVER-MIB::hpicfXcvrPwrOutHiAlarm,Unsigned32,read-only,,current,,Transceiver transmit power high alarm threshold limit in tenths of microwatts. As an example: 10000 is 1 milliwatt. The value of this object is valid when the value of  the hpicfXcvrDiagnostics object is DOM.
.1.3.6.1.4.1.11.2.14.11.5.1.82.1.1.1.1.31,HP-ICF-TRANSCEIVER-MIB::hpicfXcvrPwrOutLoAlarm,Unsigned32,read-only,,current,,Transceiver transmit power low alarm threshold limit in tenths of microwatts. As an example: 10000 is 1 milliwatt. The value of this object is valid when the value of  the hpicfXcvrDiagnostics object is DOM.
.1.3.6.1.4.1.11.2.14.11.5.1.82.1.1.1.1.32,HP-ICF-TRANSCEIVER-MIB::hpicfXcvrPwrOutHiWarn,Unsigned32,read-only,,current,,Transceiver transmit power high warning threshold limit in tenths of microwatts As an example: 10000 is 1 milliwatt. The value of this object is valid when the value of  the hpicfXcvrDiagnostics object is DOM.
.1.3.6.1.4.1.11.2.14.11.5.1.82.1.1.1.1.33,HP-ICF-TRANSCEIVER-MIB::hpicfXcvrPwrOutLoWarn,Unsigned32,read-only,,current,,Transceiver transmit power low warning threshold limit in tenths of microwatts. As an example: 10000 is 1 milliwatt. The value of this object is valid when the value of  the hpicfXcvrDiagnostics object is DOM.
.1.3.6.1.4.1.11.2.14.11.5.1.82.1.1.1.1.34,HP-ICF-TRANSCEIVER-MIB::hpicfXcvrRcvPwrHiAlarm,Unsigned32,read-only,,current,,Transceiver receive power high alarm threshold limit in tenths of microwatts. As an example: 10000 is 1 milliwatt. The value of this object is valid when the value of  the hpicfXcvrDiagnostics object is DOM.
.1.3.6.1.4.1.11.2.14.11.5.1.82.1.1.1.1.35,HP-ICF-TRANSCEIVER-MIB::hpicfXcvrRcvPwrLoAlarm,Unsigned32,read-only,,current,,Transceiver receive power low alarm threshold limit in tenths of microwatts. As an example: 10000 is 1 milliwatt. The value of this object is valid when the value of  the hpicfXcvrDiagnostics object is DOM.
.1.3.6.1.4.1.11.2.14.11.5.1.82.1.1.1.1.36,HP-ICF-TRANSCEIVER-MIB::hpicfXcvrRcvPwrHiWarn,Unsigned32,read-only,,current,,Transceiver receive power high warning threshold limit in tenths of microwatts. As an example: 10000 is 1 milliwatt. The value of this object is valid when the value of  the hpicfXcvrDiagnostics object is DOM.
.1.3.6.1.4.1.11.2.14.11.5.1.82.1.1.1.1.37,HP-ICF-TRANSCEIVER-MIB::hpicfXcvrRcvPwrLoWarn,Unsigned32,read-only,,current,,Transceiver receive power low warning threshold limit in tenths of microwatts. As an example: 10000 is 1 milliwatt. The value of this object is valid when the value of  the hpicfXcvrDiagnostics object is DOM.
.1.3.6.1.4.1.11.2.14.11.5.1.82.1.1.1.1.38,HP-ICF-TRANSCEIVER-MIB::hpicfXcvrDiagnosticsTimeStamp,OCTET,read-only,,deprecated,,********* THIS OBJECT IS DEPRECATED ********* A textual description of the diagnostics information updated for the last time in the transceiver. This object has been deprecated. Its functionality has been replaced by hpicfXcvrDiagnosticsTimeticks.
.1.3.6.1.4.1.11.2.14.11.5.1.82.1.1.1.1.39,HP-ICF-TRANSCEIVER-MIB::hpicfXcvrPhyLinkStatus,INTEGER,read-only,,current,down(0):up(1),This object indicates the link status as reported by the physical entity. The value of this object is valid when the value of  the hpicfXcvrDiagnostics object is VCT or other.
.1.3.6.1.4.1.11.2.14.11.5.1.82.1.1.1.1.40,HP-ICF-TRANSCEIVER-MIB::hpicfXcvrPhySpeed,Unsigned32,read-only,,current,,This object indicates the speed in Mbps as reported by the physical entity.  Will be zero if speed and duplex are unresolved. The value of this object is valid when the value of  the hpicfXcvrDiagnostics object is VCT or other.
.1.3.6.1.4.1.11.2.14.11.5.1.82.1.1.1.1.41,HP-ICF-TRANSCEIVER-MIB::hpicfXcvrPhyDuplex,INTEGER,read-only,,current,half(0):full(1):unspecified(2),This object indicates the duplex as reported by the physical entity. Will be unspecified if speed and duplex are unresolved. The value of this object is valid when the value of  the hpicfXcvrDiagnostics object is VCT or other.
.1.3.6.1.4.1.11.2.14.11.5.1.82.1.1.1.1.42,HP-ICF-TRANSCEIVER-MIB::hpicfXcvrMdiPairACableStatus,INTEGER,read-only,,current,normal(0):short(1):open(2):failed(3):impedanceMismatch(4):unspecified(5),This object indicates the diagnostics test status on the cable pair. Normal = No cable fault detected. Open = Lack of continuity between ends. Short = Short detected. Impedance mismatch = - Cable pair is not connected properly or - Cable pair is damaged or - Connector is faulty. Failed = TDR test failed on cable pair. Unspecified : This object is unavailable or not reported. As reported through cable diagnostics. The value of this object is valid when the value of  the hpicfXcvrDiagnostics object is VCT or other.
.1.3.6.1.4.1.11.2.14.11.5.1.82.1.1.1.1.43,HP-ICF-TRANSCEIVER-MIB::hpicfXcvrMdiPairACableLength,Unsigned32,read-only,,current,,This object indicates the cable pair length in meters as reported by cable diagnostics. A gigabit link must be present for this object to be non zero. Will be zero if not available or the transceiver does not report this object. Accuracy is +/- 10 meters. The value of this object is valid when the value of  the hpicfXcvrDiagnostics object is VCT or other.
.1.3.6.1.4.1.11.2.14.11.5.1.82.1.1.1.1.44,HP-ICF-TRANSCEIVER-MIB::hpicfXcvrMdiPairADistanceToFault,Unsigned32,read-only,,current,,This object indicates the distance in meters to a fault in the cable pair as reported through cable diagnostics. Will be zero if no fault or the transceiver does not report this object.  Accuracy is +/- 2 meters. The value of this object is valid when the value of  the hpicfXcvrDiagnostics object is VCT or other.
.1.3.6.1.4.1.11.2.14.11.5.1.82.1.1.1.1.45,HP-ICF-TRANSCEIVER-MIB::hpicfXcvrMdiPairAPolaritySwap,INTEGER,read-only,,current,normal(0):reversed(1):unspecified(2),This object indicates if the cable pair connected to the phy is inverted as reported through cable diagnostics. Will be unspecified if the this object is unavailable or not reported. The value of this object is valid when the value of  the hpicfXcvrDiagnostics object is VCT or other.
.1.3.6.1.4.1.11.2.14.11.5.1.82.1.1.1.1.46,HP-ICF-TRANSCEIVER-MIB::hpicfXcvrMdiPairASkew,Unsigned32,read-only,,current,,This object indicates the delay skew in nanoseconds  of this cable pair and the fastest cable pair as reported through cable diagnostics. Will be zero if the lowest of the pairs or if the transceiver does not report this object.  Accuracy is +/- 8 ns. The value of this object is valid when the value of  the hpicfXcvrDiagnostics object is VCT or other.
.1.3.6.1.4.1.11.2.14.11.5.1.82.1.1.1.1.47,HP-ICF-TRANSCEIVER-MIB::hpicfXcvrMdiPairBCableStatus,INTEGER,read-only,,current,normal(0):short(1):open(2):failed(3):impedanceMismatch(4):unspecified(5),This object indicates the cable diagnostics test status on the cable pair. Normal = No cable fault detected. Open = Lack of continuity between ends. Short = Short detected. Impedance mismatch = - Cable pair is not connected properly or - Cable pair is damaged or - Connector is faulty. Failed = TDR test failed on cable pair. Unspecified : This object is unavailable or not  reported.  As reported through cable diagnostics. The value of this object is valid when the value of  the hpicfXcvrDiagnostics object is VCT or other.
.1.3.6.1.4.1.11.2.14.11.5.1.82.1.1.1.1.48,HP-ICF-TRANSCEIVER-MIB::hpicfXcvrMdiPairBCableLength,Unsigned32,read-only,,current,,This object indicates the cable pair length in  meters as reported by cable diagnostics. A gigabit link must be present for this object to be non zero. Will be zero if not available or the transceiver does not report this object.  Accuracy is +/- 10 meters. The value of this object is valid when the value of  the hpicfXcvrDiagnostics object is VCT or other.
.1.3.6.1.4.1.11.2.14.11.5.1.82.1.1.1.1.49,HP-ICF-TRANSCEIVER-MIB::hpicfXcvrMdiPairBDistanceToFault,Unsigned32,read-only,,current,,This object indicates the distance in meters to a fault in the cable pair as reported through cable diagnostics. Will be zero if no fault or the transceiver does not report this object.  Accuracy is +/- 2 meters. The value of this object is valid when the value of  the hpicfXcvrDiagnostics object is VCT or other.
.1.3.6.1.4.1.11.2.14.11.5.1.82.1.1.1.1.50,HP-ICF-TRANSCEIVER-MIB::hpicfXcvrMdiPairBPolaritySwap,INTEGER,read-only,,current,normal(0):reversed(1):unspecified(2),This object indicates if the cable pair connected to the phy were inverted as reported through cable diagnostics. Will be unspecified if the this object is unavailable or not reported. The value of this object is valid when the value of  the hpicfXcvrDiagnostics object is VCT or other.
.1.3.6.1.4.1.11.2.14.11.5.1.82.1.1.1.1.51,HP-ICF-TRANSCEIVER-MIB::hpicfXcvrMdiPairBSkew,Unsigned32,read-only,,current,,This object indicates the delay skew in nanoseconds  of this cable pair and the fastest cable pair as reported through cable diagnostics. Will be zero if the lowest of the pairs or if the transceiver does not report this object.  Accuracy is +/- 8 ns. The value of this object is valid when the value of  the hpicfXcvrDiagnostics object is VCT or other.
.1.3.6.1.4.1.11.2.14.11.5.1.82.1.1.1.1.52,HP-ICF-TRANSCEIVER-MIB::hpicfXcvrMdiPairCCableStatus,INTEGER,read-only,,current,normal(0):short(1):open(2):failed(3):impedanceMismatch(4):unspecified(5),This object indicates the cable diagnostics test status on the cable pair. Normal = No cable fault detected. Open = Lack of continuity between ends. Short = Short detected. Impedance Mismatch = - Cable pair is not connected properly or - Cable pair is damaged or - Connector is faulty. Failed = TDR test failed on cable pair. Unspecified : This object is unavailable or not reported.  As reported through cable diagnostics. The value of this object is valid when the value of  the hpicfXcvrDiagnostics object is VCT or other.
.1.3.6.1.4.1.11.2.14.11.5.1.82.1.1.1.1.53,HP-ICF-TRANSCEIVER-MIB::hpicfXcvrMdiPairCCableLength,Unsigned32,read-only,,current,,This object indicates the cable length in meters  of the cable pair as reported through cable diagnostics. A gigabit link must be present for this object to be non zero. Will be zero if not available or the transceiver does not report this object.  Accuracy is +/- 10 meters. The value of this object is valid when the value of  the hpicfXcvrDiagnostics object is VCT or other.
.1.3.6.1.4.1.11.2.14.11.5.1.82.1.1.1.1.54,HP-ICF-TRANSCEIVER-MIB::hpicfXcvrMdiPairCDistanceToFault,Unsigned32,read-only,,current,,This object indicates the distance in meters to a fault in the cable pair as reported through cable diagnostics.  Will be zero if there is no fault or the transceiver does not report this object.   Accuracy is +/- 2 meters. The value of this object is valid when the value of  the hpicfXcvrDiagnostics object is VCT or other.
.1.3.6.1.4.1.11.2.14.11.5.1.82.1.1.1.1.55,HP-ICF-TRANSCEIVER-MIB::hpicfXcvrMdiPairCPolaritySwap,INTEGER,read-only,,current,normal(0):reversed(1):unspecified(2),This object indicates if the cable pair connected to the phy were inverted as reported through cable diagnostics. Will be unspecified if the this object is unavailable or not reported. The value of this object is valid when the value of  the hpicfXcvrDiagnostics object is VCT or other.
.1.3.6.1.4.1.11.2.14.11.5.1.82.1.1.1.1.56,HP-ICF-TRANSCEIVER-MIB::hpicfXcvrMdiPairCSkew,Unsigned32,read-only,,current,,This object indicates the delay skew in nanoseconds  of this cable pair and the fastest cable pair as reported through cable diagnostics. Will be zero if the lowest of the pairs or if the transceiver does not report this object.  Accuracy is +/- 8 ns.  The value of this object is valid when the value of  the hpicfXcvrDiagnostics object is VCT or other.
.1.3.6.1.4.1.11.2.14.11.5.1.82.1.1.1.1.57,HP-ICF-TRANSCEIVER-MIB::hpicfXcvrMdiPairDCableStatus,INTEGER,read-only,,current,normal(0):short(1):open(2):failed(3):impedanceMismatch(4):unspecified(5),This object indicates the cable diagnostics test status on the cable pair. Normal = No cable fault detected. Open = Lack of continuity between ends. Short = Short detected. Impedance Mismatch = - Cable pair is not connected properly or - Cable pair is damaged or - Connector is faulty. Failed = TDR test failed on cable pair. Unspecified : This object is unavailable or not  reported.  As reported through cable diagnostics. The value of this object is valid when the value of  the hpicfXcvrDiagnostics object is VCT or other.
.1.3.6.1.4.1.11.2.14.11.5.1.82.1.1.1.1.58,HP-ICF-TRANSCEIVER-MIB::hpicfXcvrMdiPairDCableLength,Unsigned32,read-only,,current,,This object indicates the cable length in meters  of the cable pair as reported through cable diagnostics. A gigabit link must be present for this object to be non zero. Will be zero if not available or the transceiver does not report this object.  Accuracy is +/- 10 meters. The value of this object is valid when the value of  the hpicfXcvrDiagnostics object is VCT or other.
.1.3.6.1.4.1.11.2.14.11.5.1.82.1.1.1.1.59,HP-ICF-TRANSCEIVER-MIB::hpicfXcvrMdiPairDDistanceToFault,Unsigned32,read-only,,current,,This object indicates the distance in meters to a fault in the cable pair as reported through cable diagnostics. Will be zero if no fault or the transceiver does not report this object.  Accuracy is +/- 2 meters. The value of this object is valid when the value of  the hpicfXcvrDiagnostics object is VCT or other.
.1.3.6.1.4.1.11.2.14.11.5.1.82.1.1.1.1.60,HP-ICF-TRANSCEIVER-MIB::hpicfXcvrMdiPairDPolaritySwap,INTEGER,read-only,,current,normal(0):reversed(1):unspecified(2),This object indicates if the cable pair connected to the phy were inverted as reported through cable diagnostics. Will be unspecified if the this object is unavailable or not reported. The value of this object is valid when the value of  the hpicfXcvrDiagnostics object is VCT or other.
.1.3.6.1.4.1.11.2.14.11.5.1.82.1.1.1.1.61,HP-ICF-TRANSCEIVER-MIB::hpicfXcvrMdiPairDSkew,Unsigned32,read-only,,current,,This object indicates the delay skew in nanoseconds  of this cable pair and the fastest cable pair as reported through cable diagnostics. Will be zero if the lowest of the pairs or if the transceiver does not report this object.  Accuracy is +/- 8 ns. The value of this object is valid when the value of  the hpicfXcvrDiagnostics object is VCT or other.
.1.3.6.1.4.1.11.2.14.11.5.1.82.1.1.1.1.62,HP-ICF-TRANSCEIVER-MIB::hpicfXcvrMdiPairABSwap,INTEGER,read-only,,current,mdi(0):mdix(1):unspecified(2),This object indicates the if the channels are swapped for channels A and B as reported through cable diagnostics. MDI : Channel A received on MDI[1], Channel B on MDI[0] MDIX : Channel A received on MDI[0], Channel B on MDI[1] Unspecified : This object is unavailable or not reported.  The value of this object is valid when the value of  the hpicfXcvrDiagnostics object is VCT or other.
.1.3.6.1.4.1.11.2.14.11.5.1.82.1.1.1.1.63,HP-ICF-TRANSCEIVER-MIB::hpicfXcvrMdiPairCDSwap,INTEGER,read-only,,current,mdi(0):mdix(1):unspecified(2),This object indicates if the channels are swapped for channels C and D as reported through cable diagnostics. MDI : Channel C received on MDI[3], Channel D on MDI[2] MDIX : Channel C received on MDI[2], Channel D on MDI[3]. Unspecified : This object is unavailable or not reported.  The value of this object is valid when the value of  the hpicfXcvrDiagnostics object is VCT or other.
.1.3.6.1.4.1.11.2.14.11.5.1.82.1.1.1.1.64,HP-ICF-TRANSCEIVER-MIB::hpicfXcvrDiagnosticsTimeTicks,TimeTicks,read-only,,current,,The value of sysUpTime of when this diagnostic information was last updated. If this diagnostic information was never updated, then this object will contain a zero value.
.1.3.6.1.4.1.11.2.14.11.5.1.82.2,HP-ICF-TRANSCEIVER-MIB::hpicfXcvrConformance,,,,,,
.1.3.6.1.4.1.11.2.14.11.5.1.82.2.1,HP-ICF-TRANSCEIVER-MIB::hpicfXcvrGroups,,,,,,
.1.3.6.1.4.1.11.2.14.11.5.1.82.2.1.1,HP-ICF-TRANSCEIVER-MIB::hpicfXcvrInfoGroup,,,,,,********* THIS GROUP IS DEPRECATED ********* A collection of objects representing transceiver  information. This object has been deprecated and replaced with hpicfXcvrInfoGroup1.
.1.3.6.1.4.1.11.2.14.11.5.1.82.2.1.2,HP-ICF-TRANSCEIVER-MIB::hpicfXcvrInfoGroup1,,,,,,A collection of objects representing transceiver  information.
.1.3.6.1.4.1.11.2.14.11.5.1.82.2.2,HP-ICF-TRANSCEIVER-MIB::hpicfXcvrCompliances,,,,,,
.1.3.6.1.4.1.11.2.14.11.5.1.82.2.2.1,HP-ICF-TRANSCEIVER-MIB::hpicfXcvrCompliance,,,,,,********* THIS COMPLIANCE IS DEPRECATED ********* Describes the requirements for conformance to the transceiver MIB. This compliance section has been deprecated and replaced with hpicfXcvrCompliance1.
.1.3.6.1.4.1.11.2.14.11.5.1.82.2.2.2,HP-ICF-TRANSCEIVER-MIB::hpicfXcvrCompliance1,,,,,,Describes the requirements for conformance to the transceiver MIB.
.1.3.6.1.4.1.11.2.14.11.5.1.86,HP-ICF-OID::hpicfSvcsAppMIB,,,,,,
.1.3.6.1.4.1.11.2.14.11.5.1.87,HP-ICF-OID::hpicfIpv6RAGuard,,,,,,
.1.3.6.1.4.1.11.2.14.11.5.1.87.1,HP-ICF-IPV6-RA-GUARD-MIB::hpicfIpv6RAGuardObjects,,,,,,
.1.3.6.1.4.1.11.2.14.11.5.1.87.1.1,HP-ICF-IPV6-RA-GUARD-MIB::hpicfIpv6RAGuardConfig,,,,,,
.1.3.6.1.4.1.11.2.14.11.5.1.87.1.1.1,HP-ICF-IPV6-RA-GUARD-MIB::hpicfRAGuardPortTable,,not-accessible,,current,,Per-interface configuration for RA Guard. Ra Guard is used to block IPv6 router advertisements  and ICMPv6 router redirects. The log option is to enable  debug logging for troubleshooting. It uses a lot of CPU and  should be used only for short periods of time. To display debug logging, use debug security ra-guard command.
.1.3.6.1.4.1.11.2.14.11.5.1.87.1.1.1.1,HP-ICF-IPV6-RA-GUARD-MIB::hpicfRAGuardPortEntry,,not-accessible,ifIndex,current,,RA Guard configuration information for a single port.
.1.3.6.1.4.1.11.2.14.11.5.1.87.1.1.1.1.1,HP-ICF-IPV6-RA-GUARD-MIB::hpicfRAGuardPortBlocked,INTEGER,read-write,,current,true(1):false(2),This object indicates whether this port is blocked for Router Advertisements and Redirects.
.1.3.6.1.4.1.11.2.14.11.5.1.87.1.1.1.1.2,HP-ICF-IPV6-RA-GUARD-MIB::hpicfRAGuardPortBlockedRAs,Counter64,read-only,,current,,This number of Router Advertisements blocked for the port.
.1.3.6.1.4.1.11.2.14.11.5.1.87.1.1.1.1.3,HP-ICF-IPV6-RA-GUARD-MIB::hpicfRAGuardPortBlockedRedirs,Counter64,read-only,,current,,This number of Router Redirects blocked for the port.
.1.3.6.1.4.1.11.2.14.11.5.1.87.1.1.1.1.4,HP-ICF-IPV6-RA-GUARD-MIB::hpicfRAGuardPortLog,INTEGER,read-write,,current,true(1):false(2),Whether to log RAs and Redirects for the port. The log option is to enable debug logging for troubleshooting.  It uses a lot of CPU and should be used only for short periods of time.
.1.3.6.1.4.1.11.2.14.11.5.1.87.1.1.1.1.5,HP-ICF-IPV6-RA-GUARD-MIB::hpicfRAGuardLastErrorCode,INTEGER,read-only,,current,noError(1):insufficientHardwareResources(2):genericError(3),Error code of the last error that occurred. A non-zero value indicates that the last operation performed by this instance did not succeed.
.1.3.6.1.4.1.11.2.14.11.5.1.87.2,HP-ICF-IPV6-RA-GUARD-MIB::hpicfIpv6RAGuardConformance,,,,,,
.1.3.6.1.4.1.11.2.14.11.5.1.87.2.1,HP-ICF-IPV6-RA-GUARD-MIB::hpicfIpv6RAGuardCompliances,,,,,,
.1.3.6.1.4.1.11.2.14.11.5.1.87.2.1.1,HP-ICF-IPV6-RA-GUARD-MIB::hpicfIpv6RAGuardCompliance,,,,,,The compliance statement for devices support of HP-ICF-IPV6-RA-GUARD-MIB.
.1.3.6.1.4.1.11.2.14.11.5.1.87.2.2,HP-ICF-IPV6-RA-GUARD-MIB::hpicfIpv6RAGuardGroups,,,,,,
.1.3.6.1.4.1.11.2.14.11.5.1.87.2.2.1,HP-ICF-IPV6-RA-GUARD-MIB::hpicfIpv6RAGuardGroup,,,,,,A collection of objects providing configuration for Ipv6 RA Guard.
.1.3.6.1.4.1.11.2.14.11.5.1.88,HP-ICF-OID::hpicfRpvstMIB,,,,,,
.1.3.6.1.4.1.11.2.14.11.5.1.89,HP-ICF-OID::hpicfOpenFlowMIB,,,,,,
.1.3.6.1.4.1.11.2.14.11.5.1.90,HP-ICF-OID::hpicfVrrpv3MIB,,,,,,
.1.3.6.1.4.1.11.2.14.11.5.1.92,HP-ICF-OID::hpicfSflowMIB,,,,,,
.1.3.6.1.4.1.11.2.14.11.5.1.94,HP-ICF-OID::hpicfMstpExtnMIB,,,,,,
.1.3.6.1.4.1.11.2.14.11.5.1.95,HP-ICF-OID::hpicfMadMIB,,,,,,
.1.3.6.1.4.1.11.2.14.11.5.1.96,HP-ICF-OID::hpicfSmartLinkMIB,,,,,,
.1.3.6.1.4.1.11.2.14.11.5.1.98,HP-ICF-OID::hpicfTR069MIB,,,,,,
.1.3.6.1.4.1.11.2.14.11.5.1.99,HP-ICF-OID::hpicfDhcpv4ServerMIB,,,,,,
.1.3.6.1.4.1.11.2.14.11.5.1.100,HP-ICF-OID::hpicfServiceTunnel,,,,,,
.1.3.6.1.4.1.11.2.14.11.5.1.102,HP-ICF-OID::hpicfDSnoopV6,,,,,,
.1.3.6.1.4.1.11.2.14.11.5.1.103,HP-ICF-OID::hpicfIpv6Lockdown,,,,,,
.1.3.6.1.4.1.11.2.14.11.5.1.104,HP-ICF-OID::hpSwitchTrapMIB,,,,,,
.1.3.6.1.4.1.11.2.14.11.5.1.105,HP-ICF-OID::hpicfJobSchedulerMIB,,,,,,
.1.3.6.1.4.1.11.2.14.11.5.1.106,HP-ICF-OID::hpicfByodMIB,,,,,,
.1.3.6.1.4.1.11.2.14.11.5.1.107,HP-ICF-OID::hpicfVirtualNetwork,,,,,,
.1.3.6.1.4.1.11.2.14.11.5.1.108,HP-ICF-OID::hpicfDldpMIB,,,,,,
.1.3.6.1.4.1.11.2.14.11.5.1.109,HP-ICF-OID::hpicfDot1qIsolatedPorts,,,,,,
.1.3.6.1.4.1.11.2.14.11.5.1.112,HP-ICF-OID::hpicfTlsMinMIB,,,,,,
.1.3.6.1.4.1.11.2.14.11.5.1.113,HP-ICF-OID::hpicfRipng,,,,,,
.1.3.6.1.4.1.11.2.14.11.5.1.114,HP-ICF-OID::hpicfPrivateVlan,,,,,,
.1.3.6.1.4.1.11.2.14.11.5.1.116,HP-ICF-OID::hpicfVsfVCMIB,,,,,,
.1.3.6.1.4.1.11.2.14.11.5.1.117,HP-ICF-OID::hpicfMvrpMIB,,,,,,
.1.3.6.1.4.1.11.2.14.11.5.1.118,HP-ICF-OID::hpicfNDSnooping,,,,,,
.1.3.6.1.4.1.11.2.14.11.5.1.119,HP-ICF-OID::hpicfArpThrottle,,,,,,
.1.3.6.1.4.1.11.2.14.11.5.1.120,HP-ICF-OID::hpicfBfd,,,,,,
.1.3.6.1.4.1.11.2.14.11.5.1.121,HP-ICF-OID::hpicfNtpMIB,,,,,,
.1.3.6.1.4.1.11.2.14.11.5.1.121.1,HP-ICF-NTP-MIB::hpicfNtpConfig,,,,,,
.1.3.6.1.4.1.11.2.14.11.5.1.121.1.1,HP-ICF-NTP-MIB::hpicfNtpConfigScalars,,,,,,
.1.3.6.1.4.1.11.2.14.11.5.1.121.1.1.1,HP-ICF-NTP-MIB::hpicfNtpConfigMode,INTEGER,read-write,,current,disabled(1):unicast(2):broadcast(3),The current operational mode of the NTP client.
.1.3.6.1.4.1.11.2.14.11.5.1.121.1.1.2,HP-ICF-NTP-MIB::hpicfNtpMaxAssociation,Integer32,read-write,,current,,The maximum number of associations of the NTP client with different server's.
.1.3.6.1.4.1.11.2.14.11.5.1.121.1.1.3,HP-ICF-NTP-MIB::hpicfNtpStatusReferenceTimeFrac,Unsigned32,read-only,,current,,The fractional part of the local time at which the local  clock was last set or corrected.  For example: a timestamp of 16.25 seconds would be stored as  two Object IDs - the integer part 16 and the fraction part .25.
.1.3.6.1.4.1.11.2.14.11.5.1.121.1.1.4,HP-ICF-NTP-MIB::hpicfNtpStatusReferenceTimeSec,Unsigned32,read-only,,current,,The integer part of the local time at which the local  clock was last set or corrected.  For example: timestamp of 16.25 seconds would be stored as two Object IDs - the integer part 16 and the fraction part .25.
.1.3.6.1.4.1.11.2.14.11.5.1.121.1.1.5,HP-ICF-NTP-MIB::hpicfNtpStatusClockOffset,OCTET,read-only,,current,,The offset of the system clock, in milliseconds,  to the synchronized peer.
.1.3.6.1.4.1.11.2.14.11.5.1.121.1.1.6,HP-ICF-NTP-MIB::hpicfNtpStatusRootDelay,OCTET,read-only,,current,,The total round-trip delay, in milliseconds, to  the primary reference source at the root of the  synchronization.
.1.3.6.1.4.1.11.2.14.11.5.1.121.1.1.7,HP-ICF-NTP-MIB::hpicfNtpStatusRootDispersion,OCTET,read-only,,current,,The root dispersion, in milliseconds, of the  running NTP entity.
.1.3.6.1.4.1.11.2.14.11.5.1.121.1.1.8,HP-ICF-NTP-MIB::hpicfNtpAssoDrift,OCTET,read-only,,current,,This is the rate of change in the system clock offset.
.1.3.6.1.4.1.11.2.14.11.5.1.121.1.2,HP-ICF-NTP-MIB::hpicfNtpInetConfigServerTable,,not-accessible,,current,,A table containing trusted IPv4 or IPv6 NTP server's to be  queried in unicast mode.
.1.3.6.1.4.1.11.2.14.11.5.1.121.1.2.1,HP-ICF-NTP-MIB::hpicfNtpInetConfigServerEntry,,not-accessible,hpicfNtpInetServerAddressType:hpicfNtpInetServerAddress,current,,The NTP server description.
.1.3.6.1.4.1.11.2.14.11.5.1.121.1.2.1.1,HP-ICF-NTP-MIB::hpicfNtpInetServerAddressType,INTEGER,not-accessible,,current,unknown(0):ipv4(1):ipv6(2):ipv4z(3):ipv6z(4):dns(16),The IP address type of a trusted NTP server.
.1.3.6.1.4.1.11.2.14.11.5.1.121.1.2.1.2,HP-ICF-NTP-MIB::hpicfNtpInetServerAddress,OCTET,not-accessible,,current,,The IP address of a trusted NTP server in which client communicates with server to synchorize its time. hpicfNtpInetServerAddress is always interpreted within the context of hpicfNtpInetServerAddressType.
.1.3.6.1.4.1.11.2.14.11.5.1.121.1.2.1.4,HP-ICF-NTP-MIB::hpicfNtpInetServerRowStatus,INTEGER,read-create,,current,active(1):notInService(2):notReady(3):createAndGo(4):createAndWait(5):destroy(6),The row status of this NTP server information. Supporting CREATEANDGO and DESTROY only.
.1.3.6.1.4.1.11.2.14.11.5.1.121.1.2.1.5,HP-ICF-NTP-MIB::hpicfNtpInetServerAuthKeyId,Unsigned32,read-create,,current,,The key identifier associated with the NTP server specified by this instance. It is an index to the hpicfntpAuthenticationKeyTable. The value identifies  the row in the hpicfntpAuthenticationKeyTable where the  authentication key can be found. The value '0' indicates that the key-id is disassociated from the NTP server.
.1.3.6.1.4.1.11.2.14.11.5.1.121.1.2.1.6,HP-ICF-NTP-MIB::hpicfNtpConfigPollMinInterval,Integer32,read-create,,current,,Period of time between successive attempts to perform an update via NTP.
.1.3.6.1.4.1.11.2.14.11.5.1.121.1.2.1.7,HP-ICF-NTP-MIB::hpicfNtpConfigPollMaxInterval,Integer32,read-create,,current,,Maximum period of time between successive attempts to perform an update via NTP.
.1.3.6.1.4.1.11.2.14.11.5.1.121.1.2.1.8,HP-ICF-NTP-MIB::hpicfNtpAssoBurst,INTEGER,read-create,,current,noburst(1):burst(2):iburst(3),This option is used for, to speed up the initial synchronization acquisition with the server, Below are different options supported.  noburst - Burst not set, Polling happens with configured or default poll interval.  burst - Send a burst of eight packets instead of the usual one  packet. The interval between the first and the second  packets is about 16 seconds to allow a modem call to  complete, while the spacing between the remaining  packets is about 2s.  iburst - Send a burst of eight packets instead of the usual one.  As long as the server is unreachable, the interval  between packets is about 16 seconds to allow a modem  call to complete.  After the server is reachable, the spacing between  packets is about 2 seconds.
.1.3.6.1.4.1.11.2.14.11.5.1.121.1.2.1.9,HP-ICF-NTP-MIB::hpicfNtpAssoIsOobm,INTEGER,read-create,,current,true(1):false(2),This object indicates whether this NTP Server is reachable over OOBM (Out Of Band Management) interface or not. This mib object will be applicable only if there is a physical OOBM port on the device.
.1.3.6.1.4.1.11.2.14.11.5.1.121.1.3,HP-ICF-NTP-MIB::hpicfNtpInetServerInfoTable,,not-accessible,,current,,A table containing trusted IPv4 or IPv6 NTP server's  information.
.1.3.6.1.4.1.11.2.14.11.5.1.121.1.3.1,HP-ICF-NTP-MIB::hpicfNtpInetServerInfoEntry,,not-accessible,hpicfNtpInetServerAddressType:hpicfNtpInetServerAddress,current,,The NTP server description.
.1.3.6.1.4.1.11.2.14.11.5.1.121.1.3.1.1,HP-ICF-NTP-MIB::hpicfNtpAssoOurPollInterval,Integer32,read-only,,current,,Poll interval for this peer.
.1.3.6.1.4.1.11.2.14.11.5.1.121.1.3.1.2,HP-ICF-NTP-MIB::hpicfNtpAssoPeerPollInterval,Integer32,read-only,,current,,Poll interval from peer to the local machine.
.1.3.6.1.4.1.11.2.14.11.5.1.121.1.3.1.3,HP-ICF-NTP-MIB::hpicfNtpAssoRootDelay,OCTET,read-only,,current,,Delay in, milliseconds, to the root of the  NTP setup. Stratum 1 clocks are considered to be at  the root of an NTP setup/design.
.1.3.6.1.4.1.11.2.14.11.5.1.121.1.3.1.4,HP-ICF-NTP-MIB::hpicfNtpAssoRootDispersion,OCTET,read-only,,current,,Maximum clock time difference that  was ever observed between the local clock and  the root clock.
.1.3.6.1.4.1.11.2.14.11.5.1.121.1.3.1.6,HP-ICF-NTP-MIB::hpicfNtpAssoPeerReach,OCTET,read-only,,current,,The reachability register of the remote association, in octal format. This number is determined by the NTP algorithm.
.1.3.6.1.4.1.11.2.14.11.5.1.121.1.3.1.7,HP-ICF-NTP-MIB::hpicfNtpAssoOriginTimeFrac,Unsigned32,read-only,,current,,It is the fractional part of this client time stamp when  the request was sent to the server after the poll interval. For example: a timestamp of 16.25 seconds would be stored as two  Object IDs - the integer part 16 and the fraction part .25.
.1.3.6.1.4.1.11.2.14.11.5.1.121.1.3.1.8,HP-ICF-NTP-MIB::hpicfNtpAssoOriginTimeSec,Unsigned32,read-only,,current,,It is integer part of this client time stamp when  the request was sent to the server after the poll interval. For example: a timestamp of 16.25 seconds would be stored as two  Object IDs - the integer part 16 and the fraction part .25.
.1.3.6.1.4.1.11.2.14.11.5.1.121.1.3.1.9,HP-ICF-NTP-MIB::hpicfNtpAssoRecvTimeFrac,Unsigned32,read-only,,current,,This is fractional part of the time stamp when the local client  received the message. The difference between the origin time  and the receive time is the offset for this peer.  For example: a timestamp of 16.25 seconds would be stored as two  Object IDs - the integer part 16 and the fraction part .25.
.1.3.6.1.4.1.11.2.14.11.5.1.121.1.3.1.10,HP-ICF-NTP-MIB::hpicfNtpAssoRecvTimeSec,Unsigned32,read-only,,current,,This is the integer part of time stamp when the local client received the message. The difference between the  origin time and the receive time is the offset for this peer.  For example: a timestamp of 16.25 seconds would be stored as two  Object IDs - the integer part 16 and the fraction part .25.
.1.3.6.1.4.1.11.2.14.11.5.1.121.1.3.1.11,HP-ICF-NTP-MIB::hpicfNtpAssoXmtTimeFrac,Unsigned32,read-only,,current,,This is the fractional part of the server's time stamp for the NTP packet when it sends back the packet to the client. For example: a timestamp of 16.25 seconds would be stored as two  Object IDs - the integer part 16 and the fraction part .25.
.1.3.6.1.4.1.11.2.14.11.5.1.121.1.3.1.12,HP-ICF-NTP-MIB::hpicfNtpAssoXmtTimeSec,Unsigned32,read-only,,current,,This is the integer part of the server's time stamp for the NTP packet when it sends back the packet to the client. For example: a timestamp of 16.25 seconds would be stored as two  Object IDs - the integer part 16 and the fraction part .25.
.1.3.6.1.4.1.11.2.14.11.5.1.121.1.3.1.13,HP-ICF-NTP-MIB::hpicfNtpAssolastPollreq,Integer32,read-only,,current,,This is the time in seconds since the last NTP packet  was received from a peer is reported. This value  should be lower than the polling interval.
.1.3.6.1.4.1.11.2.14.11.5.1.121.1.3.1.14,HP-ICF-NTP-MIB::hpicfNtpAssoPrecision,Integer32,read-only,,current,,This is the precision of the peer clock in Hz.
.1.3.6.1.4.1.11.2.14.11.5.1.121.1.3.1.15,HP-ICF-NTP-MIB::hpicfNtpAssoCurrentMode,INTEGER,read-only,,current,synchronized(1):notsynchronized(2):unknown(99),The current mode of the NTP. The definition  of each possible value as follows: notsynchronized(2) - NTP is not synchronized to any time source (stratum = 16). synchronized(1) - NTP is synchronized. unknown(99) - The state of NTP is unknown.
.1.3.6.1.4.1.11.2.14.11.5.1.121.1.3.1.16,HP-ICF-NTP-MIB::hpicfNtpAssoPeerDispersion,OCTET,read-only,,current,, The estimated maximum error of the peer clock relative to the local clock over the network path between them, in seconds. This value is determined by using NTP clock-filter algorithm.
.1.3.6.1.4.1.11.2.14.11.5.1.121.1.4,HP-ICF-NTP-MIB::hpicfNtpAuthenticationKeyTable,,not-accessible,,current,,A table containing entries of authentication key-id. The number of key-id is restricted to 8.
.1.3.6.1.4.1.11.2.14.11.5.1.121.1.4.1,HP-ICF-NTP-MIB::hpicfNtpAuthenticationKeyEntry,,not-accessible,hpicfNtpAuthenticationKeyId,current,,An authentication key entry comprising key-identifiers  such as key-id, key-value, authentication mode (MD5/SHA1), and status of the key-id if it is trusted or not.
.1.3.6.1.4.1.11.2.14.11.5.1.121.1.4.1.1,HP-ICF-NTP-MIB::hpicfNtpAuthenticationKeyId,Unsigned32,not-accessible,,current,,A unique identifier for the authentication key.
.1.3.6.1.4.1.11.2.14.11.5.1.121.1.4.1.2,HP-ICF-NTP-MIB::hpicfNtpAuthenticationKeyAuthMode,INTEGER,read-create,,current,none(1):md5(2):sha1(3),The authentication mode supported by this key.
.1.3.6.1.4.1.11.2.14.11.5.1.121.1.4.1.3,HP-ICF-NTP-MIB::hpicfNtpAuthenticationKeyValue,OCTET,read-create,,current,,A unique string that serves as the key-value for generating  the message digest sent in the NTP packet. A read on  this object will return an empty string.
.1.3.6.1.4.1.11.2.14.11.5.1.121.1.4.1.4,HP-ICF-NTP-MIB::hpicfNtpAuthenticationKeyTrusted,INTEGER,read-create,,current,true(1):false(2),This object is used to configure the status of the  authentication key as trusted. If the key-value is not trusted, the packet is not trusted. By default, the key-value is not trusted.
.1.3.6.1.4.1.11.2.14.11.5.1.121.1.4.1.5,HP-ICF-NTP-MIB::hpicfNtpAuthenticationKeyRowStatus,INTEGER,read-create,,current,active(1):notInService(2):notReady(3):createAndGo(4):createAndWait(5):destroy(6),The row status for this NTP authentication key instance. The key-id is the index and  it cannot be edited. Supporting CREATEANDGO and DESTROY only.
.1.3.6.1.4.1.11.2.14.11.5.1.121.1.4.1.6,HP-ICF-NTP-MIB::hpicfNtpAuthenticationKeyEncrypted,OCTET,read-create,,current,,The encrypted form of a unique string that serves as the key-value for generating the message digest sent in the NTP packet. This object may only be read or written when hpSwitchAuthenticationEncryptCredentialsMethod is set to a value other than none(0).  This object should only be written with an encrypted key previously read from a compatible HP Networking device.
.1.3.6.1.4.1.11.2.14.11.5.1.121.1.5,HP-ICF-NTP-MIB::hpicfNtpIpv6MulticastTable,,not-accessible,,current,,A table containing entry for enabling NTP multicast.
.1.3.6.1.4.1.11.2.14.11.5.1.121.1.5.1,HP-ICF-NTP-MIB::hpicfNtpIpv6MulticastEntry,,not-accessible,ifIndex,current,,An NTP multicast entry comprising NTP multicast on vlan.
.1.3.6.1.4.1.11.2.14.11.5.1.121.1.5.1.1,HP-ICF-NTP-MIB::hpicfNtpIpv6Multicast,INTEGER,read-create,,current,true(1):false(2),Indicates whether this interface should listen to  NTP multicast packets.
.1.3.6.1.4.1.11.2.14.11.5.1.121.1.5.1.2,HP-ICF-NTP-MIB::hpicfNtpIpv6MulticastStatus,INTEGER,read-create,,current,active(1):notInService(2):notReady(3):createAndGo(4):createAndWait(5):destroy(6),Row status of the NTP Multicast. Supporting CREATEANDGO and DESTROY only.
.1.3.6.1.4.1.11.2.14.11.5.1.121.1.7,HP-ICF-NTP-MIB::hpicfNtpAssoSampleTable,,not-accessible,,current,,A table containing samples for association.
.1.3.6.1.4.1.11.2.14.11.5.1.121.1.7.1,HP-ICF-NTP-MIB::hpicfNtpAssoSampleEntry,,not-accessible,hpicfNtpInetServerAddressType:hpicfNtpInetServerAddress:hpicfNtpAssoSampleId,current,,An association sample entry comprising 8 samples of each association for filter delay and offset.
.1.3.6.1.4.1.11.2.14.11.5.1.121.1.7.1.1,HP-ICF-NTP-MIB::hpicfNtpAssoSampleId,Unsigned32,not-accessible,,current,,The sample Id for every sample per association.
.1.3.6.1.4.1.11.2.14.11.5.1.121.1.7.1.2,HP-ICF-NTP-MIB::hpicfNtpfiltDelaySample,OCTET,read-only,,current,,The round trip delay of the sample of this association.
.1.3.6.1.4.1.11.2.14.11.5.1.121.1.7.1.3,HP-ICF-NTP-MIB::hpicfNtpfiltOffsetSample,OCTET,read-only,,current,,The offset of the sample of this association.
.1.3.6.1.4.1.11.2.14.11.5.1.121.2,HP-ICF-NTP-MIB::hpicfNtpGlobal,,,,,,
.1.3.6.1.4.1.11.2.14.11.5.1.121.2.1,HP-ICF-NTP-MIB::hpicfNtpAdminStatus,INTEGER,read-write,,current,true(1):false(2),When set to true, this enables NTP globally on the router. If set to false, this would disable NTP.
.1.3.6.1.4.1.11.2.14.11.5.1.121.3,HP-ICF-NTP-MIB::hpicfNtpConfigConformance,,,,,,
.1.3.6.1.4.1.11.2.14.11.5.1.121.3.1,HP-ICF-NTP-MIB::hpicfNtpConfigCompliances,,,,,,
.1.3.6.1.4.1.11.2.14.11.5.1.121.3.1.1,HP-ICF-NTP-MIB::hpicfNtpInetConfigCompliance,,,,,,The compliance statement for devices implementing the hpicfNtpConfig MIB.
.1.3.6.1.4.1.11.2.14.11.5.1.121.3.1.2,HP-ICF-NTP-MIB::hpicfNtpAuthenticationConfigCompliance,,,,,,The compliance statement for devices implementing the hpicfNtpConfig MIB.
.1.3.6.1.4.1.11.2.14.11.5.1.121.3.1.3,HP-ICF-NTP-MIB::hpicfNtpServerConfigCompliance,,,,,,The compliance statement for devices implementing the hpicfNtpConfig MIB.
.1.3.6.1.4.1.11.2.14.11.5.1.121.3.1.4,HP-ICF-NTP-MIB::hpicfNtpAssoSampleCompliance,,,,,,The compliance statement for devices implementing the hpicfNtpConfig MIB.
.1.3.6.1.4.1.11.2.14.11.5.1.121.3.2,HP-ICF-NTP-MIB::hpicfNtpConfigGroups,,,,,,
.1.3.6.1.4.1.11.2.14.11.5.1.121.3.2.1,HP-ICF-NTP-MIB::hpicfNtpConfigGroup,,,,,,A collection of objects for configuring the NTP client.
.1.3.6.1.4.1.11.2.14.11.5.1.121.3.2.2,HP-ICF-NTP-MIB::hpicfNtpInetServerConfigGroup,,,,,,A collection of objects for configuring the NTP server entry.
.1.3.6.1.4.1.11.2.14.11.5.1.121.3.2.3,HP-ICF-NTP-MIB::hpicfNtpAuthenticationKeyIdConfigGroup,,,,,,This group defines NTP authentication related information. It includes Key-Identifier, Key-Value, encrypted key value, flag to indicate whether the information is trusted or not and whether the authentication mode(MD5/SHA1) currently supported.
.1.3.6.1.4.1.11.2.14.11.5.1.121.3.2.4,HP-ICF-NTP-MIB::hpicfNtpAssociationSampleGroup,,,,,,This group defines sample information for eight  samples taken per association.
.1.3.6.1.4.1.11.2.14.11.5.1.122,HP-ICF-OID::hpicfPim6MIB,,,,,,
.1.3.6.1.4.1.11.2.14.11.5.1.123,HP-ICF-OID::hpicfPortScanDetectMIB,,,,,,
.1.3.6.1.4.1.11.2.14.11.5.1.124,HP-ICF-OID::hpicfMdns,,,,,,
.1.3.6.1.4.1.11.2.14.11.5.1.125,HP-ICF-OID::hpicfAMPServerMIB,,,,,,
.1.3.6.1.4.1.11.2.14.11.5.1.126,HP-ICF-OID::hpicfDevConf,,,,,,
.1.3.6.1.4.1.11.2.14.11.5.1.126.0,HP-ICF-DEV-CONF-MIB::hpSwitchDevNotifications,,,,,,
.1.3.6.1.4.1.11.2.14.11.5.1.126.1,HP-ICF-DEV-CONF-MIB::hpSwitchDevScalar,,,,,,
.1.3.6.1.4.1.11.2.14.11.5.1.126.2,HP-ICF-DEV-CONF-MIB::hpSwitchDevGlobals,,,,,,
.1.3.6.1.4.1.11.2.14.11.5.1.126.3,HP-ICF-DEV-CONF-MIB::hpSwitchDevConformance,,,,,,
.1.3.6.1.4.1.11.2.14.11.5.1.126.3.1,HP-ICF-DEV-CONF-MIB::hpSwitchDevCompliances,,,,,,
.1.3.6.1.4.1.11.2.14.11.5.1.126.3.1.1,HP-ICF-DEV-CONF-MIB::hpSwitchDevCompliance,,,,,,The compliance statement for switches that support 
.1.3.6.1.4.1.11.2.14.11.5.1.126.3.1.2,HP-ICF-DEV-CONF-MIB::hpSwitchDevCompliance1,,,,,,The compliance statement for switches that support 
.1.3.6.1.4.1.11.2.14.11.5.1.126.3.2,HP-ICF-DEV-CONF-MIB::hpSwitchDevConfigGroups,,,,,,
.1.3.6.1.4.1.11.2.14.11.5.1.126.3.2.1,HP-ICF-DEV-CONF-MIB::hpSwitchDevProfileGroup,,,,,,A collection of objects containing device profile
.1.3.6.1.4.1.11.2.14.11.5.1.126.3.2.2,HP-ICF-DEV-CONF-MIB::hpSwitchDevAssociationGroup,,,,,,A collection of objects containing information about 
.1.3.6.1.4.1.11.2.14.11.5.1.126.3.2.3,HP-ICF-DEV-CONF-MIB::hpSwitchRogueDevGroup,,,,,,A collection of objects containing rogue device information.
.1.3.6.1.4.1.11.2.14.11.5.1.126.3.2.4,HP-ICF-DEV-CONF-MIB::hpSwitchWhitelistGroup,,,,,,A collection of objects containing information about
.1.3.6.1.4.1.11.2.14.11.5.1.126.3.2.5,HP-ICF-DEV-CONF-MIB::hpSwitchDevPortGroup,,,,,,A collection of objects containing per-port device 
.1.3.6.1.4.1.11.2.14.11.5.1.126.3.2.6,HP-ICF-DEV-CONF-MIB::hpSwitchDevProfileGroupNew,,,,,,A collection of objects containing device profile
.1.3.6.1.4.1.11.2.14.11.5.1.126.4,HP-ICF-DEV-CONF-MIB::hpSwitchDevConfig,,,,,,
.1.3.6.1.4.1.11.2.14.11.5.1.126.4.1,HP-ICF-DEV-CONF-MIB::hpSwitchDevProfTable,,not-accessible,,current,,The device profile configuration table.
.1.3.6.1.4.1.11.2.14.11.5.1.126.4.1.1,HP-ICF-DEV-CONF-MIB::hpSwitchDevProfEntry,,not-accessible,hpSwitchProfIndex,current,,The device profile configuration entry.
.1.3.6.1.4.1.11.2.14.11.5.1.126.4.1.1.1,HP-ICF-DEV-CONF-MIB::hpSwitchProfIndex,Unsigned32,not-accessible,,current,,The index value which uniquely identifies a row in the profile table.
.1.3.6.1.4.1.11.2.14.11.5.1.126.4.1.1.2,HP-ICF-DEV-CONF-MIB::hpSwitchProfRowStatus,INTEGER,read-create,,current,active(1):notInService(2):notReady(3):createAndGo(4):createAndWait(5):destroy(6),The row status of this device profile entry. Allows  creation/deletion of the device profile entry. Row cannot be deleted if the device profile is associated with a  device.
.1.3.6.1.4.1.11.2.14.11.5.1.126.4.1.1.3,HP-ICF-DEV-CONF-MIB::hpSwitchProfName,OCTET,read-create,,current,,The name of the device profile. The maximum length 
.1.3.6.1.4.1.11.2.14.11.5.1.126.4.1.1.4,HP-ICF-DEV-CONF-MIB::hpSwitchProfUntaggedVlanID,Unsigned32,read-create,,current,,The untagged VLAN ID associated with this profile.
.1.3.6.1.4.1.11.2.14.11.5.1.126.4.1.1.5,HP-ICF-DEV-CONF-MIB::hpSwitchProfTaggedVlanList,OCTET,read-create,,current,,The set of tagged VLANs associated with this profile.
.1.3.6.1.4.1.11.2.14.11.5.1.126.4.1.1.6,HP-ICF-DEV-CONF-MIB::hpSwitchProfIngressBandwidth,Unsigned32,read-create,,current,,The bandwidth percentage of ingress traffic allowed on
.1.3.6.1.4.1.11.2.14.11.5.1.126.4.1.1.7,HP-ICF-DEV-CONF-MIB::hpSwitchProfEgressBandwidth,Unsigned32,read-create,,current,,The bandwidth percentage of egress traffic allowed on
.1.3.6.1.4.1.11.2.14.11.5.1.126.4.1.1.8,HP-ICF-DEV-CONF-MIB::hpSwitchProfCosPriority,Unsigned32,read-create,,current,,The Class of Service (CoS) priority for traffic entering the port associated with this profile.
.1.3.6.1.4.1.11.2.14.11.5.1.126.4.1.1.9,HP-ICF-DEV-CONF-MIB::hpSwitchProfPortSpeed,INTEGER,read-create,,current,halfDuplex10Mbits(1):halfDuplex100Mbits(2):fullDuplex10Mbits(3):fullDuplex100Mbits(4):autoNeg(5):fullDuplex1000Mbits(6):auto10Mbits(7):auto100Mbits(8):auto1000Mbits(9):auto10Gbits(10):auto10or100Mbits(11):auto40Gbits(12):auto2500Mbits(13):auto5000Mbits(14):auto2500or5000Mbits(15):auto1000or2500Mbits(16):auto1000or2500or5000Mbits(17),The port speed configuration associated with this profile.
.1.3.6.1.4.1.11.2.14.11.5.1.126.4.1.1.10,HP-ICF-DEV-CONF-MIB::hpSwitchProfPoeMaxPower,Unsigned32,read-create,,current,,The maximum power allocation measured in watts (W) for 
.1.3.6.1.4.1.11.2.14.11.5.1.126.4.1.1.11,HP-ICF-DEV-CONF-MIB::hpSwitchProfPoePriority,INTEGER,read-create,,current,critical(1):high(2):low(3),The PoE priority defined for the port associated with this
.1.3.6.1.4.1.11.2.14.11.5.1.126.4.1.1.12,HP-ICF-DEV-CONF-MIB::hpSwitchProfJumboFrameSupport,INTEGER,read-create,,current,enable(1):disable(2),The jumbo frame support status for the port  associated with this profile. Applying a  profile with jumbo frame support enabled  will also enable jumbo frame support for  all other member ports of all VLANs the  port is a member of. The default value  is disable.
.1.3.6.1.4.1.11.2.14.11.5.1.126.4.2,HP-ICF-DEV-CONF-MIB::hpSwitchDevAssociationTable,,not-accessible,,current,,The device association configuration table.
.1.3.6.1.4.1.11.2.14.11.5.1.126.4.2.1,HP-ICF-DEV-CONF-MIB::hpSwitchDevAssociationEntry,,not-accessible,hpSwitchDevAssociationType,current,,The device association configuration entry.
.1.3.6.1.4.1.11.2.14.11.5.1.126.4.2.1.1,HP-ICF-DEV-CONF-MIB::hpSwitchDevAssociationType,INTEGER,not-accessible,,current,none(1):arubaAccessPoint(2):arubaBridgeRouter(3):hpBridgeRouter(4):ciscoBridgeRouter(5):ciscoPhone(6),The type of the auto-configurable device.
.1.3.6.1.4.1.11.2.14.11.5.1.126.4.2.1.2,HP-ICF-DEV-CONF-MIB::hpSwitchDevAssociationProfName,OCTET,read-create,,current,,The name of the profile associated with this device.
.1.3.6.1.4.1.11.2.14.11.5.1.126.4.2.1.3,HP-ICF-DEV-CONF-MIB::hpSwitchDevAssociationProfID,Unsigned32,read-create,,current,,The ID of the profile associated with this device.
.1.3.6.1.4.1.11.2.14.11.5.1.126.4.2.1.4,HP-ICF-DEV-CONF-MIB::hpSwitchDevAssociationStatus,INTEGER,read-create,,current,enable(1):disable(2),The auto-configuration feature status for this device-type.
.1.3.6.1.4.1.11.2.14.11.5.1.126.4.3,HP-ICF-DEV-CONF-MIB::hpSwitchRogueDevice,,,,,,
.1.3.6.1.4.1.11.2.14.11.5.1.126.4.3.1,HP-ICF-DEV-CONF-MIB::hpSwitchRogueDevStatus,INTEGER,read-write,,current,enable(1):disable(2),The rogue AP Isolation feature status.
.1.3.6.1.4.1.11.2.14.11.5.1.126.4.3.2,HP-ICF-DEV-CONF-MIB::hpSwitchRogueDevAction,INTEGER,read-write,,current,block(1):log(2),Action to be performed when a rogue AP device is detected.
.1.3.6.1.4.1.11.2.14.11.5.1.126.4.3.3,HP-ICF-DEV-CONF-MIB::hpSwitchRogueDevMacTable,,not-accessible,,current,,The MAC entry table for any rogue AP device.
.1.3.6.1.4.1.11.2.14.11.5.1.126.4.3.3.1,HP-ICF-DEV-CONF-MIB::hpSwitchRogueDevMacEntry,,not-accessible,hpSwitchRogueDevMacAddress,current,,The MAC entry for the rogue AP device.
.1.3.6.1.4.1.11.2.14.11.5.1.126.4.3.3.1.1,HP-ICF-DEV-CONF-MIB::hpSwitchRogueDevMacAddress,OCTET,not-accessible,,current,,The MAC address of rogue AP device.
.1.3.6.1.4.1.11.2.14.11.5.1.126.4.3.3.1.2,HP-ICF-DEV-CONF-MIB::hpSwitchNeighborDevMacAddress,OCTET,read-only,,current,,The MAC address of the access point that detected the rogue 
.1.3.6.1.4.1.11.2.14.11.5.1.126.4.4,HP-ICF-DEV-CONF-MIB::hpSwitchWhitelistMacTable,,not-accessible,,current,,The rogue AP device whitelist table. MAC addresses added
.1.3.6.1.4.1.11.2.14.11.5.1.126.4.4.1,HP-ICF-DEV-CONF-MIB::hpSwitchWhitelistMacEntry,,not-accessible,hpSwitchWhitelistMacAddress,current,,The whitelist table entry.
.1.3.6.1.4.1.11.2.14.11.5.1.126.4.4.1.1,HP-ICF-DEV-CONF-MIB::hpSwitchWhitelistMacAddress,OCTET,not-accessible,,current,,The MAC address of whitelisted AP device.
.1.3.6.1.4.1.11.2.14.11.5.1.126.4.4.1.2,HP-ICF-DEV-CONF-MIB::hpSwitchWhitelistRowStatus,INTEGER,read-create,,current,active(1):notInService(2):notReady(3):createAndGo(4):createAndWait(5):destroy(6),The row status of rogue AP whitelist table.
.1.3.6.1.4.1.11.2.14.11.5.1.126.4.5,HP-ICF-DEV-CONF-MIB::hpSwitchDevPortTable,,not-accessible,,current,,The table shows per-port connected devices and any 
.1.3.6.1.4.1.11.2.14.11.5.1.126.4.5.1,HP-ICF-DEV-CONF-MIB::hpSwitchDevPortEntry,,not-accessible,hpSwitchDevPortIndex,current,,The table entry showing the device connected to this
.1.3.6.1.4.1.11.2.14.11.5.1.126.4.5.1.1,HP-ICF-DEV-CONF-MIB::hpSwitchDevPortIndex,Integer32,not-accessible,,current,,Index of the interface on this switch.
.1.3.6.1.4.1.11.2.14.11.5.1.126.4.5.1.2,HP-ICF-DEV-CONF-MIB::hpSwitchDevPortType,INTEGER,read-only,,current,none(1):arubaAccessPoint(2):arubaBridgeRouter(3):hpBridgeRouter(4):ciscoBridgeRouter(5):ciscoPhone(6),The type of partner device connected to this port.
.1.3.6.1.4.1.11.2.14.11.5.1.126.4.5.1.3,HP-ICF-DEV-CONF-MIB::hpSwitchDevPortProfName,OCTET,read-only,,current,,The name of the profile associated with the partner 
.1.3.6.1.4.1.11.2.14.11.5.1.127,HP-ICF-OID::hpicfIpSla,,,,,,
.1.3.6.1.4.1.11.2.14.11.5.1.127.0,HPICF-IPSLA-MIB::hpicfIpSlaNotifications,,,,,,
.1.3.6.1.4.1.11.2.14.11.5.1.127.0.1,HPICF-IPSLA-MIB::hpicfIpSlaThresholdexceeded,,,,,,This notification is generated when the metric calculated from the SLA result exceeds the configured threshold value. The hpicfIpSlaThrUpper is not applicable when  hpicfIpSlaThrMetricType is set to packetLoss or  testCompletion.
.1.3.6.1.4.1.11.2.14.11.5.1.127.0.2,HPICF-IPSLA-MIB::hpicfIpSlaTestCompletion,,,,,,This notification is generated when the SLA test is completed either by reaching stopTime or  hpicfIpSlaAttrNumPkts. This notification is sent only  when the action type is set to trap or trap-log.
.1.3.6.1.4.1.11.2.14.11.5.1.127.0.3,HPICF-IPSLA-MIB::hpicfIpSlaThresholdPktLoss,,,,,,This notification is generated when SLA test probe reply packets are lost consecutively for the configured number of hpicfIpSlaThrCount. This notification is sent only when the action type is set to trap or trap-log.
.1.3.6.1.4.1.11.2.14.11.5.1.127.1,HPICF-IPSLA-MIB::hpicfIpSlaObjects,,,,,,
.1.3.6.1.4.1.11.2.14.11.5.1.127.1.1,HPICF-IPSLA-MIB::hpicfIpSlaTable,,not-accessible,,current,,This table specifies IP SLA test parameters as SLA entries.
.1.3.6.1.4.1.11.2.14.11.5.1.127.1.1.1,HPICF-IPSLA-MIB::hpicfIpSlaEntry,,not-accessible,hpicfIpSlaID,current,,An entry on this table specifies the destination IP address/ Hostname, Source address, Source Interface ID & Row status corresponding to each SLA test.
.1.3.6.1.4.1.11.2.14.11.5.1.127.1.1.1.1,HPICF-IPSLA-MIB::hpicfIpSlaID,Integer32,not-accessible,,current,,This is an identifier for the IP SLA.
.1.3.6.1.4.1.11.2.14.11.5.1.127.1.1.1.2,HPICF-IPSLA-MIB::hpicfIpSlaType,INTEGER,read-create,,current,icmpEcho(1):udpEcho(2):udpJitter(3):udpJitterVoIP(4):tcpConnect(5),SLA Probe Type. IcmpEcho is similar to ping protocol and the destination should be enabled with responder functionality for udpEcho, udpJitter, udpJitterVoIP and tcpConnect.
.1.3.6.1.4.1.11.2.14.11.5.1.127.1.1.1.3,HPICF-IPSLA-MIB::hpicfIpSlaAdminState,INTEGER,read-create,,current,enable(1):disable(2),Enable or disable the IP Service Level Agreement (SLA) probe.
.1.3.6.1.4.1.11.2.14.11.5.1.127.1.1.1.4,HPICF-IPSLA-MIB::hpicfIpSlaSourceAddressType,INTEGER,read-create,,current,unknown(0):ipv4(1):ipv6(2):ipv4z(3):ipv6z(4):dns(16),SLA source address type.
.1.3.6.1.4.1.11.2.14.11.5.1.127.1.1.1.5,HPICF-IPSLA-MIB::hpicfIpSlaSourceAddress,OCTET,read-create,,current,,SLA source address.
.1.3.6.1.4.1.11.2.14.11.5.1.127.1.1.1.6,HPICF-IPSLA-MIB::hpicfIpSlaL4SourcePort,Unsigned32,read-create,,current,,SLA source port to be used for SLA probes that use a  transport layer such as udpEcho, udpJitter, udpJitterVoIP  and tcpConnect. The allowed range is from 1024 to 65535.
.1.3.6.1.4.1.11.2.14.11.5.1.127.1.1.1.7,HPICF-IPSLA-MIB::hpicfIpSlaSourceInterface,Integer32,read-create,,current,,SLA source interface.
.1.3.6.1.4.1.11.2.14.11.5.1.127.1.1.1.8,HPICF-IPSLA-MIB::hpicfIpSlaDestAddressType,INTEGER,read-create,,current,unknown(0):ipv4(1):ipv6(2):ipv4z(3):ipv6z(4):dns(16),SLA destination address type.
.1.3.6.1.4.1.11.2.14.11.5.1.127.1.1.1.9,HPICF-IPSLA-MIB::hpicfIpSlaDestAddress,OCTET,read-create,,current,,SLA destination address.
.1.3.6.1.4.1.11.2.14.11.5.1.127.1.1.1.10,HPICF-IPSLA-MIB::hpicfIpSlaL4DestPort,Unsigned32,read-create,,current,,Port on target device which responds back to the probe. This is used for SLA probes that use a transport layer such as udpEcho, udpJitter, udpJitterVoIP and tcpConnect SLA types. The allowed range is from 1024 to 65535.
.1.3.6.1.4.1.11.2.14.11.5.1.127.1.1.1.11,HPICF-IPSLA-MIB::hpicfIpSlaRowStatus,INTEGER,read-create,,current,active(1):notInService(2):notReady(3):createAndGo(4):createAndWait(5):destroy(6),SLA row status.
.1.3.6.1.4.1.11.2.14.11.5.1.127.1.2,HPICF-IPSLA-MIB::hpicfIpSlaAttrTable,,not-accessible,,current,,This table specifies IP SLA test parameters as SLA entries.
.1.3.6.1.4.1.11.2.14.11.5.1.127.1.2.1,HPICF-IPSLA-MIB::hpicfIpSlaAttrEntry,,not-accessible,hpicfIpSlaID,current,,An entry on this table specifies the attributes of SLA  test such as scheduling parameters, TOS, payload size,  history bucket size and inter packet interval, corresponding to each SLA test.
.1.3.6.1.4.1.11.2.14.11.5.1.127.1.2.1.1,HPICF-IPSLA-MIB::hpicfIpSlaSchedStartTime,OCTET,read-create,,current,,Timestamp to denote when to start this SLA probe.
.1.3.6.1.4.1.11.2.14.11.5.1.127.1.2.1.2,HPICF-IPSLA-MIB::hpicfIpSlaSchedEndTime,OCTET,read-create,,current,,Timestamp to denote when to end this SLA probe.
.1.3.6.1.4.1.11.2.14.11.5.1.127.1.2.1.3,HPICF-IPSLA-MIB::hpicfIpSlaSchedFreq,Unsigned32,read-create,,current,,Frequency in seconds. This value is used to send probes.
.1.3.6.1.4.1.11.2.14.11.5.1.127.1.2.1.4,HPICF-IPSLA-MIB::hpicfIpSlaSchedRepeat,Unsigned32,read-create,,current,,Number of times this test will be repeated.
.1.3.6.1.4.1.11.2.14.11.5.1.127.1.2.1.5,HPICF-IPSLA-MIB::hpicfIpSlaAttrTOS,Unsigned32,read-create,,current,,Type of service value to be set for the probe packet.
.1.3.6.1.4.1.11.2.14.11.5.1.127.1.2.1.6,HPICF-IPSLA-MIB::hpicfIpSlaAttrHistorySize,Unsigned32,read-create,,current,,Number of history records to be maintained for SLA test.
.1.3.6.1.4.1.11.2.14.11.5.1.127.1.2.1.7,HPICF-IPSLA-MIB::hpicfIpSlaAttrPayloadSize,Unsigned32,read-create,,current,,Size of the packet payload to be sent out for each probe.  It can be set from 10 to 1440.
.1.3.6.1.4.1.11.2.14.11.5.1.127.1.2.1.8,HPICF-IPSLA-MIB::hpicfIpSlaAttrNumPkts,Unsigned32,read-create,,current,,Number of packets to be sent out for a single probe.
.1.3.6.1.4.1.11.2.14.11.5.1.127.1.2.1.9,HPICF-IPSLA-MIB::hpicfIpSlaAttrPktInterval,Unsigned32,read-create,,current,,Inter packet interval to be used for packets that are sent out for a single probe. This value is not applicable if the hpicfIpSlaAttrNumPkts is set to 1.
.1.3.6.1.4.1.11.2.14.11.5.1.127.1.2.1.10,HPICF-IPSLA-MIB::hpicfIpSlaAttrRowStatus,INTEGER,read-create,,current,active(1):notInService(2):notReady(3):createAndGo(4):createAndWait(5):destroy(6),SLA attribute row status.
.1.3.6.1.4.1.11.2.14.11.5.1.127.1.3,HPICF-IPSLA-MIB::hpicfIpSlaThrTable,,not-accessible,,current,,This table specifies IP SLA threshold-action parameters as entries. When one of the monitored parameters of an SLA test goes beyond the configured thresholds, notifications are generated either as traps or syslog messages.
.1.3.6.1.4.1.11.2.14.11.5.1.127.1.3.1,HPICF-IPSLA-MIB::hpicfIpSlaThrEntry,,not-accessible,hpicfIpSlaID:hpicfIpSlaThrMetricType,current,,An entry on this table specifies the Metric type, upper  to be taken.
.1.3.6.1.4.1.11.2.14.11.5.1.127.1.3.1.1,HPICF-IPSLA-MIB::hpicfIpSlaThrMetricType,INTEGER,not-accessible,,current,rtt(1):jitter(2):srcTodstTime(3):dstTosrcTime(4):mos(5):icpif(6):packetLoss(7):testCompletion(8),SLA metric type to be monitored. The rtt type is the round trip time of the probe packet. The jitter type is the inter-packet delay variance. The srcTodstTime type is the one-way trip time from source to destination. The dstTosrcTtime type is the one-way trip time from destination to source. The Mean Opinion Scores (MOS) type is derived only for udpJitterVoIP SLA. The Calculated Planning Impairment Factor (ICPIF) type is derived only for udpJitterVoIP SLA. The packetLoss type is to monitor loss of communication. The testCompletion type is for notifying about the completion of probe test.
.1.3.6.1.4.1.11.2.14.11.5.1.127.1.3.1.2,HPICF-IPSLA-MIB::hpicfIpSlaThrUpper,Integer32,read-create,,current,,Acceptable upper-limit of threshold value for SLA. This  value is not applicable when hpicfIpSlaThrMetricType is set to packetLoss and testCompletion.
.1.3.6.1.4.1.11.2.14.11.5.1.127.1.3.1.3,HPICF-IPSLA-MIB::hpicfIpSlaThrLower,Integer32,read-create,,current,,Acceptable lower-limit of threshold value for SLA. This  value is not applicable when hpicfIpSlaThrMetricType is set to packetLoss and testCompletion.
.1.3.6.1.4.1.11.2.14.11.5.1.127.1.3.1.4,HPICF-IPSLA-MIB::hpicfIpSlaThrType,INTEGER,read-create,,current,immediate(1):consecutive(2),Configure threshold type to trigger action. This value is not applicable when hpicfIpSlaThrMetricType is set to testCompletion.
.1.3.6.1.4.1.11.2.14.11.5.1.127.1.3.1.5,HPICF-IPSLA-MIB::hpicfIpSlaThrCount,Unsigned32,read-create,,current,,Configure the count of the number of times the threshold value can cross the upper/lower limits. This value is  applicable only if hpicfIpSlaThrType is set to consecutive.
.1.3.6.1.4.1.11.2.14.11.5.1.127.1.3.1.6,HPICF-IPSLA-MIB::hpicfIpSlaThrAction,INTEGER,read-create,,current,none(0):trap(1):log(2):trapAndLog(3),The action to be taken when the threshold value exceeds the limit.
.1.3.6.1.4.1.11.2.14.11.5.1.127.1.3.1.7,HPICF-IPSLA-MIB::hpicfIpSlaThrRowStatus,INTEGER,read-create,,current,active(1):notInService(2):notReady(3):createAndGo(4):createAndWait(5):destroy(6),Threshold table row status.
.1.3.6.1.4.1.11.2.14.11.5.1.127.1.4,HPICF-IPSLA-MIB::hpicfIpSlaRespTable,,not-accessible,,current,,This table specifies IP SLA responder parameters as entries.
.1.3.6.1.4.1.11.2.14.11.5.1.127.1.4.1,HPICF-IPSLA-MIB::hpicfIpSlaRespEntry,,not-accessible,hpicfIpSlaRespType:hpicfIpSlaRespAddress:hpicfIpSlaRespL4Port,current,,An entry on this table specifies the local IP address, port number and row status corresponding to each SLA responder config.
.1.3.6.1.4.1.11.2.14.11.5.1.127.1.4.1.1,HPICF-IPSLA-MIB::hpicfIpSlaRespType,INTEGER,not-accessible,,current,udpEcho(1):udpJitter(2):udpJitterVoIP(3):tcpConnect(4),The SLA responder type. The udpEcho and tcpConnect objects  are for UDP and TCP packets, respectively. The udpJitter and udpJitterVoIP values calculate one-way delay, therefore a timestamp has to be embedded while replying back. This is one of the indexes for the hpicfIpSlaRespTable.
.1.3.6.1.4.1.11.2.14.11.5.1.127.1.4.1.2,HPICF-IPSLA-MIB::hpicfIpSlaRespAddressType,INTEGER,read-create,,current,unknown(0):ipv4(1):ipv6(2):ipv4z(3):ipv6z(4):dns(16),SLA responder IP address type.
.1.3.6.1.4.1.11.2.14.11.5.1.127.1.4.1.3,HPICF-IPSLA-MIB::hpicfIpSlaRespAddress,OCTET,not-accessible,,current,,The local IP address to which the responder is bound. This is one of the indexes for the hpicfIpSlaRespTable.
.1.3.6.1.4.1.11.2.14.11.5.1.127.1.4.1.4,HPICF-IPSLA-MIB::hpicfIpSlaRespL4Port,Unsigned32,not-accessible,,current,,L4 port number on hpicfIpSlaRespAddress where the responder listens for probe packets from SLA source. This is one of the indexes for the hpicfIpSlaRespTable. The allowed range is from 1024 to 65535.
.1.3.6.1.4.1.11.2.14.11.5.1.127.1.4.1.5,HPICF-IPSLA-MIB::hpicfIpSlaRespRowStatus,INTEGER,read-create,,current,active(1):notInService(2):notReady(3):createAndGo(4):createAndWait(5):destroy(6),SLA responder row status.
.1.3.6.1.4.1.11.2.14.11.5.1.127.2,HPICF-IPSLA-MIB::hpicfIpSlaConformance,,,,,,
.1.3.6.1.4.1.11.2.14.11.5.1.127.2.1,HPICF-IPSLA-MIB::hpicfIpSlaGroups,,,,,,
.1.3.6.1.4.1.11.2.14.11.5.1.127.2.1.1,HPICF-IPSLA-MIB::hpicfIpSlaGroup,,,,,,A mandatory group with a set of IP SLA objects.
.1.3.6.1.4.1.11.2.14.11.5.1.127.2.1.2,HPICF-IPSLA-MIB::hpicfIpSlaAttrGroup,,,,,,A group with a set of IP SLA attribute objects.
.1.3.6.1.4.1.11.2.14.11.5.1.127.2.1.3,HPICF-IPSLA-MIB::hpicfIpSlaThrGroup,,,,,,A group with a set of IP SLA threshold objects.
.1.3.6.1.4.1.11.2.14.11.5.1.127.2.1.4,HPICF-IPSLA-MIB::hpicfIpSlaRespGroup,,,,,,A group with a set of IP SLA responder objects.
.1.3.6.1.4.1.11.2.14.11.5.1.127.2.1.5,HPICF-IPSLA-MIB::hpicfIpSlaNotificationsGroup,,,,,,A collection of IP SLA source and responder notifications  objects.
.1.3.6.1.4.1.11.2.14.11.5.1.127.2.2,HPICF-IPSLA-MIB::hpicfIpSlaCompliances,,,,,,
.1.3.6.1.4.1.11.2.14.11.5.1.127.2.2.1,HPICF-IPSLA-MIB::hpicfIpSlaCompliance,,,,,,The compliance statement for HP switches that support IP SLA.
.1.3.6.1.4.1.11.2.14.11.5.1.128,HP-ICF-OID::hpicfTunneledNode,,,,,,
.1.3.6.1.4.1.11.2.14.11.5.1.129,HP-ICF-OID::hpicfActivateMIB,,,,,,
.1.3.6.1.4.1.11.2.14.11.5.1.129.1,HPICF-ACTIVATE-MIB::hpicfActivateObjects,,,,,,
.1.3.6.1.4.1.11.2.14.11.5.1.129.1.1,HPICF-ACTIVATE-MIB::hpicfActivateSoftwareUpdateMode,INTEGER,read-write,,current,true(1):false(2),Enable polling the Aruba Activate server for software updates.
.1.3.6.1.4.1.11.2.14.11.5.1.129.1.2,HPICF-ACTIVATE-MIB::hpicfActivateProvisionMode,INTEGER,read-write,,current,true(1):false(2),Enable Activate provision service.
.1.3.6.1.4.1.11.2.14.11.5.1.129.2,HPICF-ACTIVATE-MIB::hpicfActivateConformance,,,,,,
.1.3.6.1.4.1.11.2.14.11.5.1.129.2.1,HPICF-ACTIVATE-MIB::hpicfActivateMIBCompliances,,,,,,
.1.3.6.1.4.1.11.2.14.11.5.1.129.2.1.1,HPICF-ACTIVATE-MIB::hpicfActivateMIBCompliance,,,,,,The compliance statement for HPE switches implementing the HPICF-Activate MIB.
.1.3.6.1.4.1.11.2.14.11.5.1.129.2.2,HPICF-ACTIVATE-MIB::hpicfActivateMIBGroups,,,,,,
.1.3.6.1.4.1.11.2.14.11.5.1.129.2.2.1,HPICF-ACTIVATE-MIB::hpicfActivateConfigGroup,,,,,,A collection of objects to support the Activate feature.
.1.3.6.1.4.1.11.2.14.11.5.1.130,HP-ICF-OID::hpicfMcastMIB,,,,,,
.1.3.6.1.4.1.11.2.14.11.5.1.131,HP-ICF-OID::hpicfUrpfMIB,,,,,,
.1.3.6.1.4.1.11.2.14.11.5.1.132,HP-ICF-OID::hpicfMinKeyMIB,,,,,,
.1.3.6.1.4.1.11.2.14.11.5.1.135,HP-ICF-OID::hpicfDeviceIdentityMIB,,,,,,
.1.3.6.1.4.1.11.2.14.11.5.1.136,HP-ICF-OID::hpicfConfig,,,,,,
.1.3.6.1.4.1.11.2.14.11.5.1.138,HP-ICF-OID::hpicfDeviceFingerPrintMIB,,,,,,
.1.3.6.1.4.1.11.2.14.11.5.2,HP-ICF-OID::hpSwitchExperimental,,,,,,
.1.3.6.1.4.1.11.2.14.11.5.2.1,HP-ICF-OID::hpicfSaviMIB,,,,,,
.1.3.6.1.4.1.11.2.14.11.6,HP-ICF-OID::hpicfAccess,,,,,,
.1.3.6.1.4.1.11.2.14.11.7,HP-ICF-OID::hpicfWAN,,,,,,
.1.3.6.1.4.1.11.2.14.11.7.1,HP-ICF-OID::hpWANRouters,,,,,,
.1.3.6.1.4.1.11.2.14.11.7.1.1,HP-ICF-OID::hpSRJ8751A,,,,,,The authoritative identifier for the HP J8751A Secure Router 7001dl.
.1.3.6.1.4.1.11.2.14.11.7.1.2,HP-ICF-OID::hpSRJ8752A,,,,,,The authoritative identifier for the HP J8752A Secure Router 7102dl.
.1.3.6.1.4.1.11.2.14.11.7.1.3,HP-ICF-OID::hpSRJ8753A,,,,,,The authoritative identifier for the HP J8753A Secure Router 7203dl.
.1.3.6.1.4.1.11.2.14.11.7.1.4,HP-ICF-OID::hpSRJ8754A,,,,,,The authoritative identifier for the HP J8754A Secure Router 7306dl.
.1.3.6.1.4.1.11.2.14.11.7.1.4.1,HP-ICF-OID::hpSRPowerSupply8756A,,,,,,The authoritative identifier for the HP J8754A Secure Router 7306dl power supply.
.1.3.6.1.4.1.11.2.14.11.7.2,HP-ICF-OID::hpWANModules,,,,,,
.1.3.6.1.4.1.11.2.14.11.7.2.1,HP-ICF-OID::hpSRmoduleJ8451A,,,,,,The authoritative identifier for the HP SR dl 1 x T1 module.
.1.3.6.1.4.1.11.2.14.11.7.2.2,HP-ICF-OID::hpSRmoduleJ8452A,,,,,,The authoritative identifier for the HP SR dl 1 x T1 + DSX-1 module.
.1.3.6.1.4.1.11.2.14.11.7.2.3,HP-ICF-OID::hpSRmoduleJ8453A,,,,,,The authoritative identifier for the HP SR dl 2 x T1 module.
.1.3.6.1.4.1.11.2.14.11.7.2.4,HP-ICF-OID::hpSRmoduleJ8454A,,,,,,The authoritative identifier for the HP SR dl 1 x E1 module.
.1.3.6.1.4.1.11.2.14.11.7.2.5,HP-ICF-OID::hpSRmoduleJ8455A,,,,,,The authoritative identifier for the HP SR dl 1 x E1 + G.703 module.
.1.3.6.1.4.1.11.2.14.11.7.2.6,HP-ICF-OID::hpSRmoduleJ8456A,,,,,,The authoritative identifier for the HP SR dl 2 x E1 module.
.1.3.6.1.4.1.11.2.14.11.7.2.7,HP-ICF-OID::hpSRmoduleJ8457A,,,,,,The authoritative identifier for the HP SR dl 2 x ISDN BRI S/T module.
.1.3.6.1.4.1.11.2.14.11.7.2.8,HP-ICF-OID::hpSRmoduleJ8458A,,,,,,The authoritative identifier for the HP SR dl 1 x Serial module.
.1.3.6.1.4.1.11.2.14.11.7.2.9,HP-ICF-OID::hpSRmoduleJ8459A,,,,,,The authoritative identifier for the HP SR dl 1 x ADSL2+ Annex A module.
.1.3.6.1.4.1.11.2.14.11.7.2.10,HP-ICF-OID::hpSRmoduleJ8759A,,,,,,The authoritative identifier for the HP SR dl 1 x ADSL2+ Annex B module.
.1.3.6.1.4.1.11.2.14.11.7.2.11,HP-ICF-OID::hpSRmoduleJ8460A,,,,,,The authoritative identifier for the HP SR dl ISDN BRI U backup.
.1.3.6.1.4.1.11.2.14.11.7.2.12,HP-ICF-OID::hpSRmoduleJ8461A,,,,,,The authoritative identifier for the HP SR dl ISDN BRI S/T backup.
.1.3.6.1.4.1.11.2.14.11.7.2.13,HP-ICF-OID::hpSRmoduleJ8462A,,,,,,The authoritative identifier for the HP SR dl Analog Modem backup.
.1.3.6.1.4.1.11.2.14.11.7.2.14,HP-ICF-OID::hpSRmoduleJ8463A,,,,,,The authoritative identifier for the HP SR dl 8 x T1/E1 wide module.
.1.3.6.1.4.1.11.2.14.11.7.2.15,HP-ICF-OID::hpSRmoduleJ8464A,,,,,,The authoritative identifier for the HP SR dl DS-3 wide module.
.1.3.6.1.4.1.11.2.14.11.7.2.16,HP-ICF-OID::hpSRmoduleJ8465A,,,,,,The authoritative identifier for the HP SR dl HSSI wide module.
.1.3.6.1.4.1.11.2.14.11.7.2.17,HP-ICF-OID::hpSRmoduleJ8471A,,,,,,The authoritative identifier for the HP SR 7100/7200 IPSec module.
.1.3.6.1.4.1.11.2.14.11.7.2.18,HP-ICF-OID::hpSRmoduleJ8472A,,,,,,The authoritative identifier for the HP SR 7300 series IPSec module.
.1.3.6.1.4.1.11.2.14.11.8,HP-ICF-OID::hpicfFabric,,,,,,
.1.3.6.1.4.1.11.2.14.11.9,HP-ICF-OID::hpicfSecurityDevice,,,,,,
.1.3.6.1.4.1.11.2.14.11.10,HP-ICF-OID::hpicfSysMgmt,,,,,,
.1.3.6.1.4.1.11.2.14.11.15,HPN-ICF-OID-MIB::hpnicf,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.2,HPN-ICF-OID-MIB::hpnicfCommon,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.2.1,HPN-ICF-OID-MIB::hpnicfFtm,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.2.1.1,HPN-ICF-FTM-MIB::hpnicfFtmManMIB,,,,,,this MIB will maintain Fabric topology management. The MIB includes unit-id, unit-name and fabric authentication information.
.1.3.6.1.4.1.11.2.14.11.15.2.1.1.1,HPN-ICF-FTM-MIB::hpnicfFtmManMIBObjects,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.2.1.1.1.1,HPN-ICF-FTM-MIB::hpnicfFtmUnitTable,,not-accessible,,current,,A table of informations of XRN-Fabric Unit.
.1.3.6.1.4.1.11.2.14.11.15.2.1.1.1.1.1,HPN-ICF-FTM-MIB::hpnicfFtmUnitEntry,,not-accessible,hpnicfFtmIndex,current,,An entry for configuring unit informations of XRN-Fabric.
.1.3.6.1.4.1.11.2.14.11.15.2.1.1.1.1.1.1,HPN-ICF-FTM-MIB::hpnicfFtmIndex,Integer32,accessible-for-notify,,current,,The unique index of a unit.
.1.3.6.1.4.1.11.2.14.11.15.2.1.1.1.1.1.2,HPN-ICF-FTM-MIB::hpnicfFtmUnitID,INTEGER,read-write,,current,,Identifer of unit in fabric. Its value should be between 1 and the maximum which defines in product specification. An exception is described in description of hpnicfFtmNumberMode. In that case, the value of this object remains its original value after set to zero. 
.1.3.6.1.4.1.11.2.14.11.15.2.1.1.1.1.1.3,HPN-ICF-FTM-MIB::hpnicfFtmUnitName,OCTET,read-write,,current,,Name of unit in XRN-Fabric. It consists of no more than 64 characters.
.1.3.6.1.4.1.11.2.14.11.15.2.1.1.1.1.1.4,HPN-ICF-FTM-MIB::hpnicfFtmUnitRole,INTEGER,read-only,,current,master(0):slave(1),Role of unit in XRN-Fabric. One unit in a XRN-Fabric acts as master role and others act as slave roles
.1.3.6.1.4.1.11.2.14.11.15.2.1.1.1.1.1.5,HPN-ICF-FTM-MIB::hpnicfFtmNumberMode,INTEGER,read-only,,current,automatic(0):manual(1),Numbering Mode of unit in XRN-Fabric. If the unit ID is assigned by the auto numbering algorithm, the numbering mode will be automatic numbering; if the unit ID (hpnicfFtmUnitID) is assigned by the user, the numbering mode will be manual numbering; if hpnicfFtmUnitID is set to be zero, the numbering mode will become automatic numbering.
.1.3.6.1.4.1.11.2.14.11.15.2.1.1.1.2,HPN-ICF-FTM-MIB::hpnicfFtmAuthMode,INTEGER,read-write,,current,ftm-none(0):ftm-simple(1):ftm-md5(2),Authentication mode of XRN-Fabric.
.1.3.6.1.4.1.11.2.14.11.15.2.1.1.1.3,HPN-ICF-FTM-MIB::hpnicfFtmAuthValue,OCTET,read-write,,current,,Authentication value of XRN-Fabric Feature. ftm_none mode means no authentication. In simple mode, the value is password of a string of 1 to 16 charactors. While in md5 mode, the value is key of a string within 16 charactors.
.1.3.6.1.4.1.11.2.14.11.15.2.1.1.1.4,HPN-ICF-FTM-MIB::hpnicfFtmFabricVlanID,INTEGER,read-write,,current,,The object is used for get and set the Fabric VlanID. Only is the equipment not in the stacking status, the value can be set.
.1.3.6.1.4.1.11.2.14.11.15.2.1.1.1.5,HPN-ICF-FTM-MIB::hpnicfFtmFabricType,INTEGER,read-only,,current,outofStack(1):line(2):ring(3):mesh(4),Topology type of Fabric. outofStack means this unit is not in stack.
.1.3.6.1.4.1.11.2.14.11.15.2.1.1.2,HPN-ICF-FTM-MIB::hpnicfFtmManMIBComformance,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.2.1.1.2.1,HPN-ICF-FTM-MIB::hpnicfFtmMIBCompliances,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.2.1.1.2.1.1,HPN-ICF-FTM-MIB::hpnicfFtmMIBCompliance,,,,,,The compliance statement for FTM implementing the MIB.
.1.3.6.1.4.1.11.2.14.11.15.2.1.1.2.2,HPN-ICF-FTM-MIB::hpnicfFtmMIBGroups,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.2.1.1.2.2.1,HPN-ICF-FTM-MIB::hpnicfFtmConfigGroup,,,,,,The basic collection of objects for sending trap of FTM Management.
.1.3.6.1.4.1.11.2.14.11.15.2.1.1.2.2.2,HPN-ICF-FTM-MIB::hpnicfFtmNotificationGroup,,,,,,The basic collection of objects for sending trap of FTM Management.
.1.3.6.1.4.1.11.2.14.11.15.2.1.1.3,HPN-ICF-FTM-MIB::hpnicfFtmManMIBNotification,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.2.1.1.3.1,HPN-ICF-FTM-MIB::hpnicfFtmUnitIDChange,,,,,,When unit id changes in fabric, this trap is sent with unit index and its new id .
.1.3.6.1.4.1.11.2.14.11.15.2.1.1.3.2,HPN-ICF-FTM-MIB::hpnicfFtmUnitNameChange,,,,,,When unit name changes in fabric, this trap is sent with unit index and its new name.
.1.3.6.1.4.1.11.2.14.11.15.2.2,HPN-ICF-OID-MIB::hpnicfUIMgt,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.2.2.1,HPN-ICF-UI-MAN-MIB::hpnicfUIMgtObjects,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.2.2.1.1,HPN-ICF-UI-MAN-MIB::hpnicfUIBasicInfo,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.2.2.1.1.1,HPN-ICF-UI-MAN-MIB::hpnicfUIScalarObjects,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.2.2.1.1.2,HPN-ICF-UI-MAN-MIB::hpnicfUITrapBindObjects,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.2.2.1.1.2.1,HPN-ICF-UI-MAN-MIB::hpnicfTerminalUserName,OCTET,accessible-for-notify,,current,, It represents the name of the logging user when login with authentication, otherwise login mode, such as Console, AUX, TTY, VTY etc. 
.1.3.6.1.4.1.11.2.14.11.15.2.2.1.1.2.2,HPN-ICF-UI-MAN-MIB::hpnicfTerminalSource,OCTET,accessible-for-notify,,current,, Login mode, such as Console, AUX, TTY, VTY etc. 
.1.3.6.1.4.1.11.2.14.11.15.2.2.1.1.2.3,HPN-ICF-UI-MAN-MIB::hpnicfTerminalUserAuthFailureReason,INTEGER,accessible-for-notify,,current,exceedRetries(1):authTimeout(2):otherReason(3),The reason why a user failed to log in.
.1.3.6.1.4.1.11.2.14.11.15.2.2.1.1.3,HPN-ICF-UI-MAN-MIB::hpnicfUINotifications,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.2.2.1.1.3.0,HPN-ICF-UI-MAN-MIB::hpnicfUINotificationsPrefix,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.2.2.1.1.3.0.1,HPN-ICF-UI-MAN-MIB::hpnicfLogIn,,,,,, This notification is generated when a user logs in. 
.1.3.6.1.4.1.11.2.14.11.15.2.2.1.1.3.0.2,HPN-ICF-UI-MAN-MIB::hpnicfLogOut,,,,,, This notification is generated when a user logs out. 
.1.3.6.1.4.1.11.2.14.11.15.2.2.1.1.3.0.3,HPN-ICF-UI-MAN-MIB::hpnicfLogInAuthenFailure,,,,,, This notification is generated when a user fails to log in because of authentication. 
.1.3.6.1.4.1.11.2.14.11.15.2.2.1.2,HPN-ICF-UI-MAN-MIB::hpnicfVtyMan,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.2.2.1.2.1,HPN-ICF-UI-MAN-MIB::hpnicfVtyAccTable,,not-accessible,,current,,Description.
.1.3.6.1.4.1.11.2.14.11.15.2.2.1.2.1.1,HPN-ICF-UI-MAN-MIB::hpnicfVtyAccEntry,,not-accessible,hpnicfVtyAccUserIndex:hpnicfVtyAccConnway,current,,Description.
.1.3.6.1.4.1.11.2.14.11.15.2.2.1.2.1.1.1,HPN-ICF-UI-MAN-MIB::hpnicfVtyAccUserIndex,Integer32,not-accessible,,current,, The relative index of the user interface of vty. 
.1.3.6.1.4.1.11.2.14.11.15.2.2.1.2.1.1.2,HPN-ICF-UI-MAN-MIB::hpnicfVtyAccConnway,INTEGER,not-accessible,,current,inbound(1):outbound(2):linkinbound(3):acl6inbound(11):acl6outbound(12), inbound(1):Filter login connections from current UI with ipv4 layer acl. outbound(2):Filter logout connections from current UI with ipv4 layer acl. linkinbound(3):Filter login connections from current UI with link layer acl. acl6inbound(11):Filter login connections from current UI with ipv6 layer acl. acl6outbound(12):Filter logout connections from current UI with ipv6 layer acl. 
.1.3.6.1.4.1.11.2.14.11.15.2.2.1.2.1.1.3,HPN-ICF-UI-MAN-MIB::hpnicfVtyAccAclNum,Integer32,read-create,,current,, The filter rule number of ACL. 
.1.3.6.1.4.1.11.2.14.11.15.2.2.1.2.1.1.4,HPN-ICF-UI-MAN-MIB::hpnicfVtyAccEntryRowStatus,INTEGER,read-create,,current,active(1):notInService(2):notReady(3):createAndGo(4):createAndWait(5):destroy(6), The status of this conceptual row. Now only support CreateAndGo and Destroy and Active. 
.1.3.6.1.4.1.11.2.14.11.15.2.2.1.3,HPN-ICF-UI-MAN-MIB::hpnicfConStatus,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.2.2.1.3.1,HPN-ICF-UI-MAN-MIB::hpnicfConStatusTable,,not-accessible,,current,, The current status of CONSOLE user interface. A group of attributes are used to describe the current status. 
.1.3.6.1.4.1.11.2.14.11.15.2.2.1.3.1.1,HPN-ICF-UI-MAN-MIB::hpnicfConStatusEntry,,not-accessible,hpnicfConUserIndex,current,, An entry of hpnicfConStatusTable. 
.1.3.6.1.4.1.11.2.14.11.15.2.2.1.3.1.1.1,HPN-ICF-UI-MAN-MIB::hpnicfConUserIndex,Integer32,not-accessible,,current,, The index of the user interface of CONSOLE. It's equal to current UserID. 
.1.3.6.1.4.1.11.2.14.11.15.2.2.1.3.1.1.2,HPN-ICF-UI-MAN-MIB::hpnicfConReAuth,INTEGER,read-write,,current,disable(1):enable(2), The re-authentication attribute of current user interface. After disconnection of current user interface, connection is rebuilt, at the moment disable(1): re-authentication is not need. enable(2): re-authentication is need. 
.1.3.6.1.4.1.11.2.14.11.15.2.2.2,HPN-ICF-UI-MAN-MIB::hpnicfUIMgtMIBConformance18,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.2.2.2.1,HPN-ICF-UI-MAN-MIB::hpnicfUIMgtMIBCompliances,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.2.2.2.1.1,HPN-ICF-UI-MAN-MIB::hpnicfUIMgtMIBCompliance,,,,,,The compliance statement
.1.3.6.1.4.1.11.2.14.11.15.2.2.2.2,HPN-ICF-UI-MAN-MIB::hpnicfUIMgtManMIBGroups,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.2.2.2.2.1,HPN-ICF-UI-MAN-MIB::hpnicfUIMgtBasicGroup,,,,,,A collection of objects for a basic implement.
.1.3.6.1.4.1.11.2.14.11.15.2.2.2.2.2,HPN-ICF-UI-MAN-MIB::hpnicfConStatusGroup,,,,,,A collection of current user interface status.
.1.3.6.1.4.1.11.2.14.11.15.2.3,HPN-ICF-OID-MIB::hpnicfSystemMan,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.2.3.1,HPN-ICF-SYS-MAN-MIB::hpnicfSystemManMIBObjects,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.2.3.1.1,HPN-ICF-SYS-MAN-MIB::hpnicfSysClock,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.2.3.1.1.1,HPN-ICF-SYS-MAN-MIB::hpnicfSysLocalClock,OCTET,read-write,,current,, This node gives the current local time of the system. The unit of it is DateAndTime. 
.1.3.6.1.4.1.11.2.14.11.15.2.3.1.1.2,HPN-ICF-SYS-MAN-MIB::hpnicfSysSummerTime,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.2.3.1.1.2.1,HPN-ICF-SYS-MAN-MIB::hpnicfSysSummerTimeEnable,INTEGER,read-only,,current,enable(1):disable(2),This node indicates the status of summer time. If the value of this node is enable, means that summer time is enabled. If the value is disable, means that summer time is disabled. 
.1.3.6.1.4.1.11.2.14.11.15.2.3.1.1.2.2,HPN-ICF-SYS-MAN-MIB::hpnicfSysSummerTimeZone,OCTET,read-write,,current,, This node describes the name of time zone in summer. The string is only used to display in local time when summer time is running. That the value of hpnicfSysLocalClock has the time zone information means that summer time is running. 
.1.3.6.1.4.1.11.2.14.11.15.2.3.1.1.2.3,HPN-ICF-SYS-MAN-MIB::hpnicfSysSummerTimeMethod,INTEGER,read-write,,current,oneOff(1):repeating(2), This node provides the execute method of summer time. oneOff(1): means that summer time only takes effect at specified time. repeating(2): means that summer time takes effect in specified month/day once a year. 
.1.3.6.1.4.1.11.2.14.11.15.2.3.1.1.2.4,HPN-ICF-SYS-MAN-MIB::hpnicfSysSummerTimeStart,OCTET,read-write,,current,, This node provides the start time of summer time. 
.1.3.6.1.4.1.11.2.14.11.15.2.3.1.1.2.5,HPN-ICF-SYS-MAN-MIB::hpnicfSysSummerTimeEnd,OCTET,read-write,,current,, This node provides the end time of summer time. The end time must be more than start time one day and less than start time one year. 
.1.3.6.1.4.1.11.2.14.11.15.2.3.1.1.2.6,HPN-ICF-SYS-MAN-MIB::hpnicfSysSummerTimeOffset,Integer32,read-write,,current,, This node provides the offset time of summer time. The offset time(in seconds) means that how much time need to be appended to the local time. 
.1.3.6.1.4.1.11.2.14.11.15.2.3.1.1.3,HPN-ICF-SYS-MAN-MIB::hpnicfSysLocalClockString,OCTET,read-write,,current,,This node gives the current local time of the system. For example, Tuesday May 26, 2002 at 1:30:15 would be displayed as: 2002-5-26T13:30:15.0Z
.1.3.6.1.4.1.11.2.14.11.15.2.3.1.2,HPN-ICF-SYS-MAN-MIB::hpnicfSysCurrent,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.2.3.1.2.1,HPN-ICF-SYS-MAN-MIB::hpnicfSysCurTable,,not-accessible,,current,, The current status of system. A configuration file, an image file and bootrom information are used to describe the current status. 
.1.3.6.1.4.1.11.2.14.11.15.2.3.1.2.1.1,HPN-ICF-SYS-MAN-MIB::hpnicfSysCurEntry,,not-accessible,hpnicfSysCurEntPhysicalIndex,current,, An entry of hpnicfSysCurTable. 
.1.3.6.1.4.1.11.2.14.11.15.2.3.1.2.1.1.1,HPN-ICF-SYS-MAN-MIB::hpnicfSysCurEntPhysicalIndex,Integer32,not-accessible,,current,,The value of this object is the entity index which depends on the implementation of ENTITY-MIB. If ENTITY-MIB is not supported, the value for this object is the unit ID for XRN devices , 0 for non-XRN device which has only one mainboard, the board number for non-XRN device which have several mainboards. 
.1.3.6.1.4.1.11.2.14.11.15.2.3.1.2.1.1.2,HPN-ICF-SYS-MAN-MIB::hpnicfSysCurCFGFileIndex,Integer32,read-only,,current,, The startup configuration file currently used by the specified entity. If the value of it is zero, no configuration file is used. It will be the value of corresponding hpnicfSysCFGFileIndex in hpnicfSysCFGFileTable. 
.1.3.6.1.4.1.11.2.14.11.15.2.3.1.2.1.1.3,HPN-ICF-SYS-MAN-MIB::hpnicfSysCurImageIndex,Integer32,read-only,,current,,The image file currently used by the specified entity. It will be the value of corresponding hpnicfSysImageIndex in hpnicfSysImageTable.
.1.3.6.1.4.1.11.2.14.11.15.2.3.1.2.1.1.4,HPN-ICF-SYS-MAN-MIB::hpnicfSysCurBtmFileName,OCTET,read-only,,current,,The bootrom file currently used by the specified entity.
.1.3.6.1.4.1.11.2.14.11.15.2.3.1.2.1.1.5,HPN-ICF-SYS-MAN-MIB::hpnicfSysCurUpdateBtmFileName,OCTET,read-only,,current,, The default value of this object is the same as the value of hpnicfSysCurBtmFileName. The value will be changed after updating the bootrom successfully. This bootrom will take effect on next startup. 
.1.3.6.1.4.1.11.2.14.11.15.2.3.1.3,HPN-ICF-SYS-MAN-MIB::hpnicfSysReload,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.2.3.1.3.1,HPN-ICF-SYS-MAN-MIB::hpnicfSysReloadSchedule,Integer32,read-write,,current,, The object points one row in hpnicfSysReloadScheduleTable. Its value is equal to the value of hpnicfSysReloadScheduleIndex. When a reload action is finished, the value of it would be zero which means no any reload schedule is selected. 
.1.3.6.1.4.1.11.2.14.11.15.2.3.1.3.2,HPN-ICF-SYS-MAN-MIB::hpnicfSysReloadAction,INTEGER,read-write,,current,reloadUnavailable(1):reloadOnSchedule(2):reloadAtOnce(3):reloadCancel(4), Writing reloadOnSchedule(2) to this object performs the reload operation on schedule. If hpnicfSysReloadScheduleTime is not set, the value of hpnicfSysReloadAction can't be set to 'reloadOnSchedule(2)'. Writing reloadAtOnce(3)to this object performs the reload operation at once, regardless of the hpnicfSysReloadScheduleTime. When reloadCancel(4)is set, the scheduled reload action will be cancelled and the value of hpnicfSysReloadAction will be 'reloadUnavailable(1)',the value of hpnicfSysReloadSchedule will be 0, hpnicfSysReloadTag will be given a value of zero length, but the content of hpnicfSysReloadScheduleTable will remain. The hpnicfSysReloadSchedule and hpnicfSysReloadTag determine the reload entity(ies) in mutually exclusive way. And the hpnicfSysReloadSchedule will be handled at first. If the value of hpnicfSysReloadSchedule is invalid, then the hpnicfSysReloadTag will be handled. If the value of hpnicfSysReloadSchedule is valid, the value of hpnicfSysReloadTag is ignored and a reload action will be implemented to the entity specified by hpnicfSysReloadEntity in the entry pointed by hpnicfSysReloadSchedule. If hpnicfSysReloadSchedule is valid, but the entry hpnicfSysReloadSchedule pointing to is not active, the reload action will be ignored , and an inconsistent value will be returned. If multiple entities are required to be reloaded at the same time, the value of hpnicfSysReloadTag must be specified to select the reload parameters in the hpnicfSysReloadSceduelTable, and hpnicfSysReloadSchedule must have the value of '0'. If the whole fabric is to be reloaded in an XRN device, all the units in the fabric must have at least one entry in the hpnicfSysReloadSceduelTable with the same tag in hpnicfSysReloadSceduelTagList. When a reload action is done, or there is no reload action, the value should be reloadUnavailable(1). 
.1.3.6.1.4.1.11.2.14.11.15.2.3.1.3.3,HPN-ICF-SYS-MAN-MIB::hpnicfSysReloadScheduleTable,,not-accessible,,current,, A reload parameters set table. The table is exclusively used for reloading. When reloading action finished, the value of the table may be empty or still exist. If the mainboard in non-XRN device or all the units of the fabric in XRN device are reloaded,then the table will be refreshed. 
.1.3.6.1.4.1.11.2.14.11.15.2.3.1.3.3.1,HPN-ICF-SYS-MAN-MIB::hpnicfSysReloadScheduleEntry,,not-accessible,hpnicfSysReloadScheduleIndex,current,,Entry of hpnicfSysReloadScheduleTable.
.1.3.6.1.4.1.11.2.14.11.15.2.3.1.3.3.1.1,HPN-ICF-SYS-MAN-MIB::hpnicfSysReloadScheduleIndex,Integer32,not-accessible,,current,,The index of hpnicfSysReloadScheduleTable. There are two parts for this index depicted as follows: 31 15 0 +++++++++++++++++++++++++++++++++++++++++ + physical index + random index + ( bit 16..31 ) ( bit 0..15 ) +++++++++++++++++++++++++++++++++++++++++ From bit0 to bit15 (two bytes), if the row is automatic created, the value is zero, and if the row is created by users, then the value is determined by the users. From bit16 to bit31 (two bytes) is the physical index the same as the entPhysicalIndex specified in ENTITY-MIB. For XRN devices, physical index is the value of a chassis entPhysicalIndex. 0 for non-XRN device which has only one main board, the board number for non-XRN device which have multiple main boards.
.1.3.6.1.4.1.11.2.14.11.15.2.3.1.3.3.1.2,HPN-ICF-SYS-MAN-MIB::hpnicfSysReloadEntity,Integer32,read-create,,current,, The value of hpnicfSysReloadEntity indicates an entry in entPhysicalTable, which is the physical entity to be reloaded. If ENTITY-MIB is not supported,the value for this object is the unit ID for XRN devices , 0 for non-XRN device which has only one mainboard, the board number for non-XRN device which have several mainboards. Each entity has only one row in hpnicfSysReloadScheduleTable. 
.1.3.6.1.4.1.11.2.14.11.15.2.3.1.3.3.1.3,HPN-ICF-SYS-MAN-MIB::hpnicfSysReloadCfgFile,Integer32,read-create,,current,, The value indicates an entry in hpnicfSysCFGFileTable. It defines a configuration file for reload action. It is the value of corresponding hpnicfSysCFGFileIndex in hpnicfSysCFGFileTable. The zero value means no configuration file has been set for this entry, and no configuration file is used during system reloading. 
.1.3.6.1.4.1.11.2.14.11.15.2.3.1.3.3.1.4,HPN-ICF-SYS-MAN-MIB::hpnicfSysReloadImage,Integer32,read-create,,current,, The value indicates an entry in hpnicfSysImageTable. It defines an image file for reload action. It is the value of corresponding hpnicfSysImageIndex in hpnicfSysImageTable. If dual image is supported, the main image attribute can be set through this object or by hpnicfSysImageType of hpnicfSysImageTable of the entity. It is strongly suggested to set this attribute by the latter. If main image attribute is set here, the hpnicfSysImageType in hpnicfSysImageTable of the corresponding entity will be updated, and vice versa. Before reboot, the device will check the validation of the entry. If the file does not exist, the device will not reboot and a trap will be send to NMS. 
.1.3.6.1.4.1.11.2.14.11.15.2.3.1.3.3.1.5,HPN-ICF-SYS-MAN-MIB::hpnicfSysReloadReason,OCTET,read-create,,current,, The reason of system's reloading. It is a zero length octet string when not set. 
.1.3.6.1.4.1.11.2.14.11.15.2.3.1.3.3.1.6,HPN-ICF-SYS-MAN-MIB::hpnicfSysReloadScheduleTime,OCTET,read-create,,current,, Specify the local time at which the reload action will occur. we will only take octet strings with length 8 for this object which indicates the local time of the switch. The maximum scheduled interval between the specified time and the current system clock time is 24 days . field octets contents range ----- ------ -------- ----- 1 1-2 year 0..65536 2 3 month 1..12 3 4 day 1..31 4 5 hour 0..23 5 6 minutes 0..59 6 7 seconds 0..60 For example, Tuesday May 26, 1992 at 1:30:15 PM would be displayed as: 1992-5-26,13:30:15 If the set value is less than the value of hpnicfSysLocalClock or beyond the maximum scheduled time limit, a bad value error occurred. The value of all-zero octet strings indicates system reload at once if the reload action is reloadOnSchedule(2). 
.1.3.6.1.4.1.11.2.14.11.15.2.3.1.3.3.1.7,HPN-ICF-SYS-MAN-MIB::hpnicfSysReloadRowStatus,INTEGER,read-create,,current,active(1):notInService(2):notReady(3):createAndGo(4):createAndWait(5):destroy(6), If one of the value of hpnicfSysReloadEntity,hpnicfSysReloadImage is invalid, the value of hpnicfSysReloadRowStatus can not be set to the value of ACTIVE. A valid entry means the specified element is available in current system. 
.1.3.6.1.4.1.11.2.14.11.15.2.3.1.3.3.1.8,HPN-ICF-SYS-MAN-MIB::hpnicfSysReloadScheduleTagList,OCTET,read-create,,current,, It specifies a tag list for the entry. 
.1.3.6.1.4.1.11.2.14.11.15.2.3.1.3.4,HPN-ICF-SYS-MAN-MIB::hpnicfSysReloadTag,OCTET,read-write,,current,,This object contains a single tag value which is used to select entries in the hpnicfSysReloadScheduleTable. In the hpnicfSysReloadScheduleTable,any entry that contains a tag value which is equal to the value of this object is selected. For example, the value of hpnicfSysReloadTag is 'TOM',and the hpnicfSysReloadScheduleTagList of each hpnicfSysReloadScheduleTable entry are as follows: 1)'TOM,ROBERT,MARY' 2)'TOM,DAVE' 3)'DAVE,MARY' Since there are 'TOM' in 1) and 2),so 1) and 2) are selected. If this object contains a value of zero length, no entries are selected. 
.1.3.6.1.4.1.11.2.14.11.15.2.3.1.4,HPN-ICF-SYS-MAN-MIB::hpnicfSysImage,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.2.3.1.4.1,HPN-ICF-SYS-MAN-MIB::hpnicfSysImageNum,Integer32,read-only,,current,, The number of system images. It indicates the total entries of hpnicfSysImageTable. 
.1.3.6.1.4.1.11.2.14.11.15.2.3.1.4.2,HPN-ICF-SYS-MAN-MIB::hpnicfSysImageTable,,not-accessible,,current,,The system image management table. When 'copy srcfile destfile' is executed via the CLI, if destfile is not existed, then hpnicfSysImageType of the new file will be 'none'; otherwise hpnicfSysImageType keeps its current value. When 'move srcfile destfile' is executed via the CLI, hpnicfSysImageType and hpnicfSysImageIndex remain the same while hpnicfSysImageLocation changes. When 'rename srcfile' is executed via the CLI,hpnicfSysImageType and hpnicfSysImageIndex remain the same while hpnicfSysImageName changes. When 'delete srcfile' is executed via the CLI, the file is deleted from hpnicfSysImageTable while index of the file keeps and will not be allocated. 
.1.3.6.1.4.1.11.2.14.11.15.2.3.1.4.2.1,HPN-ICF-SYS-MAN-MIB::hpnicfSysImageEntry,,not-accessible,hpnicfSysImageIndex,current,, An entity image entry. Each entry consists of information of an entity image. The hpnicfSysImageIndex exclusively defines an image file. 
.1.3.6.1.4.1.11.2.14.11.15.2.3.1.4.2.1.1,HPN-ICF-SYS-MAN-MIB::hpnicfSysImageIndex,Integer32,not-accessible,,current,,There are two parts for the index depicted as follows: 31 15 0 +++++++++++++++++++++++++++++++++++ + physical index + image index + +++++++++++++++++++++++++++++++++++ From bit0 to bit15 (two bytes) is the image index;Image file Index is a monotonically increasing integer for the sole purpose of indexing events. When it reaches the maximum value, an extremely unlikely event, the agent wraps the value back to 1 and may flush existing entries. From bit16 to bit31 (two bytes) is the physical index the same as the entPhysicalIndex specified in ENTITY-MIB. If ENTITY-MIB is not supported,the value for this object is the unit ID for XRN devices ,0 for non-XRN device which has only one main board,the board number for non-XRN device which have several main boards. Any index beyond the above range will not be supported. If a file is added in, its hpnicfSysImageIndex will be the maximum image index plus one. If the image file is removed, renamed, or moved from one place to another, its hpnicfSysImageIndex is not reallocated. If the image file's content is replaced, its hpnicfSysImageIndex will not change. 
.1.3.6.1.4.1.11.2.14.11.15.2.3.1.4.2.1.2,HPN-ICF-SYS-MAN-MIB::hpnicfSysImageName,OCTET,read-only,,current,,The file name of the image. It MUST NOT contain the path of the file.
.1.3.6.1.4.1.11.2.14.11.15.2.3.1.4.2.1.3,HPN-ICF-SYS-MAN-MIB::hpnicfSysImageSize,Integer32,read-only,,current,, Size of the file in bytes. 
.1.3.6.1.4.1.11.2.14.11.15.2.3.1.4.2.1.4,HPN-ICF-SYS-MAN-MIB::hpnicfSysImageLocation,OCTET,read-only,,current,, The directory path of the image. Its form should be the same as what defined in file system. Currently it is defined as follows: For mainboard: flash:/ For slave mainboard and subboards: slotN#flash:/ For XRN devices: unitN>slotN#flash:/ 
.1.3.6.1.4.1.11.2.14.11.15.2.3.1.4.2.1.5,HPN-ICF-SYS-MAN-MIB::hpnicfSysImageType,INTEGER,read-write,,current,main(1):backup(2):none(3):secure(4):main-backup(5):main-secure(6):backup-secure(7):main-backup-secure(8), It indicates the reloading sequence attribute of the image. For devices which support dual image: If the value is 'main(1)',the image will be the first image in the next reloading procedure. If the value is 'backup(2)', the image will be used if the main image fails. If the value is 'secure(4)', the image will be used if the main image and backup image both fail. If the value is 'none(3)',the image will not be used in the next reloading procedure. At the same time,you also can specify the main image by hpnicfSysReloadImage in hpnicfSysReloadScheduleTable. If the image is different from previous main image, the previous main image will not be main image again. And the image table will update with this variation. Vice versa, if you have defined the reload schedule, and then you define a new main image through hpnicfSysImageType when you are waiting the reload schedule to be executed, the real main image will be the latest one. It is strongly suggested to define the main image here, not by hpnicfSysReloadImage in hpnicfSysReloadScheduleTable. There are some rules for setting the value of hpnicfSysImageType: a)When a new image file is defined as 'main' or 'backup' file,the hpnicfSysImageType of old 'main' or 'backup' file will automatically be 'none'. b)It is forbidden to set 'none' attribute manually. c)It is forbidden to set 'secure' attribute manually. d)If 'main' image is set to 'backup', the file keeps 'main'. And vice versa. At this time, the file has 'main-backup' property. e)If the secure image is set to 'main' or 'backup', the file has 'main-secure' or 'backup-secure'property. f)If the secure image is set to 'main' and 'backup', the file has the 'main-backup-secure' property. g)If the none image is set to 'main' or 'backup', the file has the 'main' or 'backup' property. The following table describes whether it is ok to set to another state directly from original state. +--------------+-----------+-------------+-------------+ | set to | set to | set to | set to | | | | | | original | 'main' | 'backup' | 'none' | 'secure' | state | | | | | --------------+--------------+-----------+-------------+-------------+ | | | | | main | --- | yes | no | no | | | | | | | | | | | --------------+--------------+-----------+-------------|-------------+ | | | | | backup | yes | --- | no | no | | | | | | --------------+--------------+-----------+-------------|-------------+ | | | | | | | | | | none | yes | yes | --- | no | | | | | | --------------+--------------+-----------+-------------+-------------+ | | | | | secure | yes | yes | no | --- | | | | | | | | | | 
.1.3.6.1.4.1.11.2.14.11.15.2.3.1.5,HPN-ICF-SYS-MAN-MIB::hpnicfSysCFGFile,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.2.3.1.5.1,HPN-ICF-SYS-MAN-MIB::hpnicfSysCFGFileNum,Integer32,read-only,,current,, The number of the configuration files in the system. It indicates the total entries of hpnicfSysCFGFileTable. 
.1.3.6.1.4.1.11.2.14.11.15.2.3.1.5.2,HPN-ICF-SYS-MAN-MIB::hpnicfSysCFGFileTable,,not-accessible,,current,,A table of configuration files in this system. At present, the system doesn't support dual configure file, it should act as 'dual image' if dual configure file is supported. 
.1.3.6.1.4.1.11.2.14.11.15.2.3.1.5.2.1,HPN-ICF-SYS-MAN-MIB::hpnicfSysCFGFileEntry,,not-accessible,hpnicfSysCFGFileIndex,current,, A configuration file entry. Each entry consists of information of a configuration file. hpnicfSysCFGFileIndex exclusively decides a configuration file. 
.1.3.6.1.4.1.11.2.14.11.15.2.3.1.5.2.1.1,HPN-ICF-SYS-MAN-MIB::hpnicfSysCFGFileIndex,Integer32,not-accessible,,current,,There are two parts for the index depicted as follows: 31 15 0 +++++++++++++++++++++++++++++++++++ + physical index + cfgFile index + +++++++++++++++++++++++++++++++++++ From bit0 to bit15 (two bytes) is the configuration file index; the configuration file index is a monotonically increasing integer for the sole purpose of indexing events. When it reaches the maximum value, an extremely unlikely event, the agent wraps the value back to 1 and may flush existing entries. From bit16 to bit31 (two bytes) is the physical index the same as the entPhysicalIndex specified in ENTITY-MIB. If ENTITY-MIB is not supported, the value for this object is the unit ID for XRN devices ,0 for non-XRN device which has only one slot,the board number for non-XRN device which have several slots. Any index beyond the above range will not be supported. 
.1.3.6.1.4.1.11.2.14.11.15.2.3.1.5.2.1.2,HPN-ICF-SYS-MAN-MIB::hpnicfSysCFGFileName,OCTET,read-only,,current,, Configuration file name. The name should not include the colon (:) character as it is a special separator character used to delineate the device name, partition name and the file name. 
.1.3.6.1.4.1.11.2.14.11.15.2.3.1.5.2.1.3,HPN-ICF-SYS-MAN-MIB::hpnicfSysCFGFileSize,Integer32,read-only,,current,, Size of the file in bytes. Note that it does not include the size of the filesystem file header. File size will always be non-zero. 
.1.3.6.1.4.1.11.2.14.11.15.2.3.1.5.2.1.4,HPN-ICF-SYS-MAN-MIB::hpnicfSysCFGFileLocation,OCTET,read-only,,current,, The directory path of the image. Its form should be the same as what defined in filesystem. Currently it is defined as follows: For mainboard: flash:/ For slave mainboard and subboards: slotN#flash:/ For XRN devices: unitN>slotN#flash:/ 
.1.3.6.1.4.1.11.2.14.11.15.2.3.1.6,HPN-ICF-SYS-MAN-MIB::hpnicfSysBtmFile,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.2.3.1.6.1,HPN-ICF-SYS-MAN-MIB::hpnicfSysBtmFileLoad,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.2.3.1.6.1.1,HPN-ICF-SYS-MAN-MIB::hpnicfSysBtmLoadMaxNumber,Integer32,read-only,,current,, This object shows the maximum number of hpnicfSysBtmLoadEntry in each device/unit. 
.1.3.6.1.4.1.11.2.14.11.15.2.3.1.6.2,HPN-ICF-SYS-MAN-MIB::hpnicfSysBtmLoadTable,,not-accessible,,current,, This table is used to update the bootrom and show the results of the update operation. The bootrom files are listed at the hpnicfFlhFileTable. These files are used to update bootrom. 
.1.3.6.1.4.1.11.2.14.11.15.2.3.1.6.2.1,HPN-ICF-SYS-MAN-MIB::hpnicfSysBtmLoadEntry,,not-accessible,hpnicfSysBtmLoadIndex,current,, Entries in the hpnicfSysBtmLoadTable are created and deleted using the hpnicfSysBtmRowStatus object. When a new row is being created and the number of entries is hpnicfSysBtmLoadMaxNumber, the row with minimal value of hpnicfSysBtmLoadTime and the value of hpnicfSysBtmFileType is none(2), should be destroyed automatically. 
.1.3.6.1.4.1.11.2.14.11.15.2.3.1.6.2.1.1,HPN-ICF-SYS-MAN-MIB::hpnicfSysBtmLoadIndex,Integer32,not-accessible,,current,, The index of hpnicfSysBtmLoadTable. There are two parts for this index depicted as follows: 31 15 0 +++++++++++++++++++++++++++++++++++++++++ + physical index + random index + ( bit 16..31 ) ( bit 0..15 ) +++++++++++++++++++++++++++++++++++++++++ From bit0 to bit15 (two bytes), if the row is created by command line, the value is determined by system, and if the row is created by SNMP, the value is determined by users. From bit16 to bit31 (two bytes) is the physical index the same as the entPhysicalIndex specified in ENTITY-MIB. If ENTITY-MIB is not supported, the value of this object is the unit ID for XRN devices, 0 for non-XRN device which has only one main board, the board number for non-XRN device which has multiple main boards. 
.1.3.6.1.4.1.11.2.14.11.15.2.3.1.6.2.1.2,HPN-ICF-SYS-MAN-MIB::hpnicfSysBtmFileName,OCTET,read-create,,current,, The bootrom file name is determined by the users. The file must exist in corresponding entity. The validity of the bootrom file will be identified by system. If the file is invalid, the bootrom should fail to be updated, and the value of hpnicfSysBtmErrorStatus should be failed(4). 
.1.3.6.1.4.1.11.2.14.11.15.2.3.1.6.2.1.3,HPN-ICF-SYS-MAN-MIB::hpnicfSysBtmFileType,INTEGER,read-create,,current,main(1):none(2), main(1) - The effective bootrom file. none(2) - The noneffective file. When bootrom is being updated, this object must be set to main(1). When bootrom is updated successfully, this object should be main(1), and the former object with the same physical index should be none(2). When bootrom failed to be updated, this object should be none(2). 
.1.3.6.1.4.1.11.2.14.11.15.2.3.1.6.2.1.4,HPN-ICF-SYS-MAN-MIB::hpnicfSysBtmRowStatus,INTEGER,read-create,,current,active(1):notInService(2):notReady(3):createAndGo(4):createAndWait(5):destroy(6), Only support active(1), createAndGo(4), destroy(6). When a row is created successfully, the value of this object should be active(1), the value of hpnicfSysBtmFileName and hpnicfSysBtmFileType can not be modified by users. When bootrom is being updated, the value of hpnicfSysBtmErrorStatus is inProgress(2). When bootrom failed to be updated, the value of hpnicfSysBtmErrorStatus should be failed(4). When bootrom is updated successfully, the value of hpnicfSysBtmErrorStatus should be success(3). The value of hpnicfSysCurUpdateBtmFileName should change to the new bootrom file name. When another row is created successfully with the same physical index, and the update is successful, then the value of former hpnicfSysBtmFileType should be none(2) automatically. If a row is destroyed, hpnicfSysCurUpdateBtmFileName should not change. If a device/unit reboots, hpnicfSysBtmLoadTable should be empty. 
.1.3.6.1.4.1.11.2.14.11.15.2.3.1.6.2.1.5,HPN-ICF-SYS-MAN-MIB::hpnicfSysBtmErrorStatus,INTEGER,read-only,,current,invalidFile(1):inProgress(2):success(3):failed(4), This object shows the status of the specified operation after creating a row. invalidFile(1) - file is invalid. inProgress(2) - the operation is in progress. success(3) - the operation was done successfully. failed(4) - the operation failed. 
.1.3.6.1.4.1.11.2.14.11.15.2.3.1.6.2.1.6,HPN-ICF-SYS-MAN-MIB::hpnicfSysBtmLoadTime,TimeTicks,read-only,,current,, This object indicates operation time. 
.1.3.6.1.4.1.11.2.14.11.15.2.3.1.7,HPN-ICF-SYS-MAN-MIB::hpnicfSysPackage,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.2.3.1.7.1,HPN-ICF-SYS-MAN-MIB::hpnicfSysPackageNum,Integer32,read-only,,current,, The number of software packages. It indicates the total entries of hpnicfSysPackageTable. 
.1.3.6.1.4.1.11.2.14.11.15.2.3.1.7.2,HPN-ICF-SYS-MAN-MIB::hpnicfSysPackageTable,,not-accessible,,current,,The system package management table. 
.1.3.6.1.4.1.11.2.14.11.15.2.3.1.7.2.1,HPN-ICF-SYS-MAN-MIB::hpnicfSysPackageEntry,,not-accessible,hpnicfSysPackageIndex,current,, An software package entry. Each entry consists of information of an software package. 
.1.3.6.1.4.1.11.2.14.11.15.2.3.1.7.2.1.1,HPN-ICF-SYS-MAN-MIB::hpnicfSysPackageIndex,Integer32,not-accessible,,current,,There are two parts for the index depicted as follows: 31 15 0 +++++++++++++++++++++++++++++++++++ + physical index + package index + +++++++++++++++++++++++++++++++++++ From bit0 to bit15 (two bytes) is the Package index; Package file Index is a monotonically increasing integer for the sole purpose of indexing events. When it reaches the maximum value, an extremely unlikely event, the agent wraps the value back to 1 and may flush existing entries. From bit16 to bit31 (two bytes) is the physical index the same as the entPhysicalIndex specified in ENTITY-MIB. Any index beyond the above range will not be supported. If a file is added in, its hpnicfSysPackageIndex will be the maximum image index plus one. If the package file is removed, renamed, or moved from one place to another, its hpnicfSysPackageIndex is not reallocated. If the package file's content is replaced, its hpnicfSysPackageIndex will not change. 
.1.3.6.1.4.1.11.2.14.11.15.2.3.1.7.2.1.2,HPN-ICF-SYS-MAN-MIB::hpnicfSysPackageName,OCTET,read-only,,current,, The file name of the package. It MUST NOT contain the path of the file. 
.1.3.6.1.4.1.11.2.14.11.15.2.3.1.7.2.1.3,HPN-ICF-SYS-MAN-MIB::hpnicfSysPackageSize,Unsigned32,read-only,,current,, Size of the file in bytes. 
.1.3.6.1.4.1.11.2.14.11.15.2.3.1.7.2.1.4,HPN-ICF-SYS-MAN-MIB::hpnicfSysPackageLocation,OCTET,read-only,,current,, The directory path of the package. Its form should be the same as what defined in file system. Currently it is defined as follows: For mainboard: flash:/ For slave mainboard and subboards: slotN#flash:/ 
.1.3.6.1.4.1.11.2.14.11.15.2.3.1.7.2.1.5,HPN-ICF-SYS-MAN-MIB::hpnicfSysPackageType,INTEGER,read-only,,current,boot(1):system(2):feature(3):patch(4), It indicates the type of the package file. boot : kernel, file system, memory management and other core components. system : interface management, configuration management and other basic system package. feature : feature packages, providing different services. patch : patch file contains fixes for a specific defect. 
.1.3.6.1.4.1.11.2.14.11.15.2.3.1.7.2.1.6,HPN-ICF-SYS-MAN-MIB::hpnicfSysPackageAttribute,INTEGER,read-write,,current,none(1):primary(2):secondary(3):primarySecondary(4), It indicates the attribute of the package file. If the value is 'primary', the package will be the first package in the next reloading procedure. If the value is 'secondary', the package will be used if the primary package fails. If the value is 'none', it will not be used in the next reloading procedure. 
.1.3.6.1.4.1.11.2.14.11.15.2.3.1.7.2.1.7,HPN-ICF-SYS-MAN-MIB::hpnicfSysPackageStatus,INTEGER,read-only,,current,active(1):inactive(2), It indicates the status of the package file. If this file is used in the current system, its status is 'active'. 
.1.3.6.1.4.1.11.2.14.11.15.2.3.1.7.2.1.8,HPN-ICF-SYS-MAN-MIB::hpnicfSysPackageDescription,OCTET,read-only,,current,, It is the description of the package. 
.1.3.6.1.4.1.11.2.14.11.15.2.3.1.7.2.1.9,HPN-ICF-SYS-MAN-MIB::hpnicfSysPackageFeature,OCTET,read-only,,current,, Indicate the feature of the package. Different package files could be the same feature. 
.1.3.6.1.4.1.11.2.14.11.15.2.3.1.7.2.1.10,HPN-ICF-SYS-MAN-MIB::hpnicfSysPackageVersion,OCTET,read-only,,current,, Indicate the version of the package. 
.1.3.6.1.4.1.11.2.14.11.15.2.3.1.7.2.1.11,HPN-ICF-SYS-MAN-MIB::hpnicfSysPackageLoadAttribute,INTEGER,read-write,,current,none(1):primary(2):secondary(3):primarySecondary(4),File attribute of the startup image for an extended device to load from the parent device. Examples of extended devices include PEXs and firewall modules. The none attribute is returned if the image is not for extended devices, or if the load attribute is not specified.
.1.3.6.1.4.1.11.2.14.11.15.2.3.1.7.2.1.12,HPN-ICF-SYS-MAN-MIB::hpnicfSysPackageModel,OCTET,read-only,,current,,Indicates whether the image file is for an extended device or the parent device. Examples of extended devices include PEXs and firewall modules.
.1.3.6.1.4.1.11.2.14.11.15.2.3.1.7.3,HPN-ICF-SYS-MAN-MIB::hpnicfSysPackageOperateEntryLimit,Integer32,read-write,,current,, The maximum number of the entries in hpnicfSysPackageOperateTable. 
.1.3.6.1.4.1.11.2.14.11.15.2.3.1.7.4,HPN-ICF-SYS-MAN-MIB::hpnicfSysPackageOperateTable,,not-accessible,,current,,A table of package file operate.
.1.3.6.1.4.1.11.2.14.11.15.2.3.1.7.4.1,HPN-ICF-SYS-MAN-MIB::hpnicfSysPackageOperateEntry,,not-accessible,hpnicfSysPackageOperateIndex,current,, An operate request entry. 
.1.3.6.1.4.1.11.2.14.11.15.2.3.1.7.4.1.1,HPN-ICF-SYS-MAN-MIB::hpnicfSysPackageOperateIndex,Integer32,not-accessible,,current,, The unique index value of a row in this table. 
.1.3.6.1.4.1.11.2.14.11.15.2.3.1.7.4.1.2,HPN-ICF-SYS-MAN-MIB::hpnicfSysPackageOperatePackIndex,Integer32,read-create,,current,, Specify the package file in the hpnicfSysPackageTable. 
.1.3.6.1.4.1.11.2.14.11.15.2.3.1.7.4.1.3,HPN-ICF-SYS-MAN-MIB::hpnicfSysPackageOperateStatus,INTEGER,read-create,,current,active(1):inactive(2), activate or deactivate a package in the hpnicfSysPackageTable. 
.1.3.6.1.4.1.11.2.14.11.15.2.3.1.7.4.1.4,HPN-ICF-SYS-MAN-MIB::hpnicfSysPackageOperateRowStatus,INTEGER,read-create,,current,active(1):notInService(2):notReady(3):createAndGo(4):createAndWait(5):destroy(6), the status of this table entry. When the status is active all the object's value in the entry is not allowed to modified. 
.1.3.6.1.4.1.11.2.14.11.15.2.3.1.7.4.1.5,HPN-ICF-SYS-MAN-MIB::hpnicfSysPackageOperateResult,INTEGER,read-only,,current,opInProgress(1):opSuccess(2):opUnknownFailure(3):opInvalidFile(4):opNotSupport(5), the result of the operation. 
.1.3.6.1.4.1.11.2.14.11.15.2.3.1.8,HPN-ICF-SYS-MAN-MIB::hpnicfSysIpeFile,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.2.3.1.8.1,HPN-ICF-SYS-MAN-MIB::hpnicfSysIpeFileNum,Integer32,read-only,,current,, The number of software IPE(Image Package Envelop) files. It indicates the total entries of hpnicfSysIpeFileTable. 
.1.3.6.1.4.1.11.2.14.11.15.2.3.1.8.2,HPN-ICF-SYS-MAN-MIB::hpnicfSysIpeFileTable,,not-accessible,,current,,The system IPE file manage table. 
.1.3.6.1.4.1.11.2.14.11.15.2.3.1.8.2.1,HPN-ICF-SYS-MAN-MIB::hpnicfSysIpeFileEntry,,not-accessible,hpnicfSysIpeFileIndex,current,, An IPE package file entry. Each entry consists of information of an IPE package file. hpnicfSysIpeFileIndex exclusively decides an IPE file. 
.1.3.6.1.4.1.11.2.14.11.15.2.3.1.8.2.1.1,HPN-ICF-SYS-MAN-MIB::hpnicfSysIpeFileIndex,Integer32,not-accessible,,current,,There are two parts for the index depicted as follows: 31 15 0 +++++++++++++++++++++++++++++++++++ + physical index + IPE index + +++++++++++++++++++++++++++++++++++ From bit0 to bit15 (two bytes) is the IPE file index; IPE file Index is a monotonically increasing integer for the sole purpose of indexing events. When it reaches the maximum value, an extremely unlikely event, the agent wraps the value back to 1 and may flush existing entries. From bit16 to bit31 (two bytes) is the physical index the same as the entPhysicalIndex specified in ENTITY-MIB. Any index beyond the above range will not be supported. If a file is added in, its hpnicfSysIpeFileIndex will be the maximum image ndex plus one. If the IPE file is removed, renamed, or moved from one place to another, its hpnicfSysIpeFileIndex is not reallocated. If the IPE file's content is replaced, its hpnicfSysIpeFileIndex will not change. 
.1.3.6.1.4.1.11.2.14.11.15.2.3.1.8.2.1.2,HPN-ICF-SYS-MAN-MIB::hpnicfSysIpeFileName,OCTET,read-only,,current,, The file name of the IPE file. It MUST NOT contain the path of the file. 
.1.3.6.1.4.1.11.2.14.11.15.2.3.1.8.2.1.3,HPN-ICF-SYS-MAN-MIB::hpnicfSysIpeFileSize,Unsigned32,read-only,,current,, Size of the file in bytes. 
.1.3.6.1.4.1.11.2.14.11.15.2.3.1.8.2.1.4,HPN-ICF-SYS-MAN-MIB::hpnicfSysIpeFileLocation,OCTET,read-only,,current,, The directory path of the IPE file. Its form should be the same as what defined in file system. Currently it is defined as follows: For mainboard: flash:/ For slave mainboard and subboards: slotN#flash:/ 
.1.3.6.1.4.1.11.2.14.11.15.2.3.1.8.2.1.5,HPN-ICF-SYS-MAN-MIB::hpnicfSysIpeFileModel,OCTET,read-only,,current,,Device models for which the IPE file contains software images. For the ease of software upgrade, an IPE file might contain software images for a parent device and extended devices. Examples of extended devices include PEXs and firewall modules.
.1.3.6.1.4.1.11.2.14.11.15.2.3.1.8.3,HPN-ICF-SYS-MAN-MIB::hpnicfSysIpePackageTable,,not-accessible,,current,, The IPE package file table. It shows the package files in the IPE file. 
.1.3.6.1.4.1.11.2.14.11.15.2.3.1.8.3.1,HPN-ICF-SYS-MAN-MIB::hpnicfSysIpePackageEntry,,not-accessible,hpnicfSysIpeFileIndex:hpnicfSysIpePackageIndex,current,, An entry of the hpnicfIpePackageTable. Indexed by hpnicfSysIpeFileIndex and hpnicfSysIpePackageIndex. 
.1.3.6.1.4.1.11.2.14.11.15.2.3.1.8.3.1.1,HPN-ICF-SYS-MAN-MIB::hpnicfSysIpePackageIndex,Integer32,not-accessible,,current,, It is the IPE package index; IPE Package Index is a monotonically increasing integer for the sole purpose of indexing events. When it reaches the maximum value, an extremely unlikely event, the agent wraps the value back to 1 and may flush existing entries. Any index beyond the above range will not be supported. 
.1.3.6.1.4.1.11.2.14.11.15.2.3.1.8.3.1.2,HPN-ICF-SYS-MAN-MIB::hpnicfSysIpePackageName,OCTET,read-only,,current,,The file name of the package file.
.1.3.6.1.4.1.11.2.14.11.15.2.3.1.8.3.1.3,HPN-ICF-SYS-MAN-MIB::hpnicfSysIpePackageSize,Unsigned32,read-only,,current,, Size of the package file in bytes. 
.1.3.6.1.4.1.11.2.14.11.15.2.3.1.8.3.1.4,HPN-ICF-SYS-MAN-MIB::hpnicfSysIpePackageType,INTEGER,read-only,,current,boot(1):system(2):feature(3):patch(4), It indicates the type of the package file. boot : kernel, file system, memory management and other core components. system : interface management, configuration management and other basic system package. feature : feature packages, providing different services. patch : patch file contains fixes for a specific defect. 
.1.3.6.1.4.1.11.2.14.11.15.2.3.1.8.3.1.5,HPN-ICF-SYS-MAN-MIB::hpnicfSysIpePackageDescription,OCTET,read-only,,current,, It is the description of the package. 
.1.3.6.1.4.1.11.2.14.11.15.2.3.1.8.3.1.6,HPN-ICF-SYS-MAN-MIB::hpnicfSysIpePackageFeature,OCTET,read-only,,current,, Indicate the feature of the package. 
.1.3.6.1.4.1.11.2.14.11.15.2.3.1.8.3.1.7,HPN-ICF-SYS-MAN-MIB::hpnicfSysIpePackageVersion,OCTET,read-only,,current,, The version of the package. 
.1.3.6.1.4.1.11.2.14.11.15.2.3.1.8.3.1.8,HPN-ICF-SYS-MAN-MIB::hpnicfSysIpePackageModel,OCTET,read-only,,current,,Indicates whether the image package file is for an extended device, the parent device, or both. Examples of extended devices include PEXs and firewall modules.
.1.3.6.1.4.1.11.2.14.11.15.2.3.1.8.4,HPN-ICF-SYS-MAN-MIB::hpnicfSysIpeFileOperateTable,,not-accessible,,current,,A table of IPE file operate.
.1.3.6.1.4.1.11.2.14.11.15.2.3.1.8.4.1,HPN-ICF-SYS-MAN-MIB::hpnicfSysIpeFileOperateEntry,,not-accessible,hpnicfSysIpeFileOperateIndex,current,, An operate request entry. 
.1.3.6.1.4.1.11.2.14.11.15.2.3.1.8.4.1.1,HPN-ICF-SYS-MAN-MIB::hpnicfSysIpeFileOperateIndex,Integer32,not-accessible,,current,, The unique index value of a row in this table. 
.1.3.6.1.4.1.11.2.14.11.15.2.3.1.8.4.1.2,HPN-ICF-SYS-MAN-MIB::hpnicfSysIpeFileOperateFileIndex,Integer32,read-create,,current,, Specify the IPE file in the hpnicfSysIpeFileTable. This IPE file will be unpacked to package files. 
.1.3.6.1.4.1.11.2.14.11.15.2.3.1.8.4.1.3,HPN-ICF-SYS-MAN-MIB::hpnicfSysIpeFileOperateAttribute,INTEGER,read-create,,current,none(1):primary(2):secondary(3):primarySecondary(4), It indicates the attribute of the IPE file when it is used in the reloading. If the value is 'primary', the packages in the IPE file will be the first packages in the next reloading procedure. If the value is 'secondary', the package in the IPE file will be used if the primary packages fails. If the value is 'none', the IPE file is only unpacked, will not be used in the reloading procedure. 
.1.3.6.1.4.1.11.2.14.11.15.2.3.1.8.4.1.4,HPN-ICF-SYS-MAN-MIB::hpnicfSysIpeFileOperateRowStatus,INTEGER,read-create,,current,active(1):notInService(2):notReady(3):createAndGo(4):createAndWait(5):destroy(6), the status of this table entry. When the status is active all the object's value in the entry is not allowed to modified. 
.1.3.6.1.4.1.11.2.14.11.15.2.3.1.8.4.1.5,HPN-ICF-SYS-MAN-MIB::hpnicfSysIpeFileOperateResult,INTEGER,read-only,,current,opInProgress(1):opSuccess(2):opUnknownFailure(3):opInvalidFile(4):opDeviceFull(5):opFileOpenError(6), the result of the operation. 
.1.3.6.1.4.1.11.2.14.11.15.2.3.1.9,HPN-ICF-SYS-MAN-MIB::hpnicfSysSetBootImage,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.2.3.1.9.1,HPN-ICF-SYS-MAN-MIB::hpnicfSysSetBootImageOp,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.2.3.1.9.1.1,HPN-ICF-SYS-MAN-MIB::hpnicfSysSetBootImageAction,INTEGER,read-write,,current,none(1):done(2):bootLoadPrimary(3):bootLoadSecondary(4):bootLoadPrimarySecondary(5):bootPrimary(6):bootSecondary(7):bootPrimarySecondary(8):loadPrimary(9):loadSecondary(10):loadPrimarySecondary(11),Sets images as primary startup images, secondary startup images, or both. Primary startup images are also called 'main' startup images. For extended devices, startup images saved on their local media are called 'local startup images,' and images saved on the parent device are called 'remote startup images.' none: Returns a success without setting image attributes. done: Clears data for the previous startup image operation. This object must be set 'done' before each startup image operation. -------------------------+-----------------------+--------------------------------------------------- Action | Parent devices | Extended devices -------------------------+-----------------------+--------------------------------------------------- bootLoadPrimary | Sets images as the | Sets images as the primary startup images | primary startup | | images | With storage medium: Sets both local and | | remote startup images | | Without storage medium: Sets remote startup images -------------------------+-----------------------+--------------------------------------------------- bootLoadSecondary | Sets images as the | Sets images as the backup startup images | backup startup images | | | With storage medium: Sets both local and | | remote startup images | | Without storage medium: Sets remote startup images -------------------------+-----------------------+--------------------------------------------------- bootLoadPrimarySecondary | Sets images as both | Sets images as both the primary and backup startup | the primary and | images | backup startup images | With storage medium: Sets both local and | | remote startup images | | Without storage medium: Sets remote startup images -------------------------+-----------------------+--------------------------------------------------- bootPrimary | Sets images as the | Sets images as the primary startup images | primary startup | | images | With storage medium: Sets local startup images | | Without storage medium: N/A -------------------------+-----------------------+--------------------------------------------------- bootSecondary | Sets images as the | Sets images as the backup startup images | backup startup images | | | With storage medium: Sets local startup images | | Without storage medium: N/A -------------------------+-----------------------+--------------------------------------------------- bootPrimarySecondary | Sets images as both | Sets images as both the primary and backup startup | the primary and | images | backup startup images | With storage medium: Sets local startup images | | Without storage medium: N/A -------------------------+-----------------------+--------------------------------------------------- loadPrimary | N/A | Sets
.1.3.6.1.4.1.11.2.14.11.15.2.3.1.9.1.2,HPN-ICF-SYS-MAN-MIB::hpnicfSysSetBootImageFileOverWrite,INTEGER,read-write,,current,true(1):false(2),Determines whether to overwrite the existing image file with the same name as the downloaded image file. 
.1.3.6.1.4.1.11.2.14.11.15.2.3.1.9.1.3,HPN-ICF-SYS-MAN-MIB::hpnicfSysSetBootImageRemoveIpeFile,INTEGER,read-write,,current,true(1):false(2),Determines whether the IPE file will be removed when the startup images are set successfully. If this object is set to TRUE, the IPE file will be removed.
.1.3.6.1.4.1.11.2.14.11.15.2.3.1.9.1.4,HPN-ICF-SYS-MAN-MIB::hpnicfSysSetBootImageStatus,INTEGER,read-only,,current,none(1):doing(2):success(3):failed(4),Status of the startup image set operation.
.1.3.6.1.4.1.11.2.14.11.15.2.3.1.9.1.5,HPN-ICF-SYS-MAN-MIB::hpnicfSysSetBootImageFailedReason,OCTET,read-only,,current,,Startup image operation failure reason. The field is empty if the operation was successful.
.1.3.6.1.4.1.11.2.14.11.15.2.3.1.9.2,HPN-ICF-SYS-MAN-MIB::hpnicfSysBootPackageTable,,not-accessible,,current,,Table of images to be set as startup images. It should be used when hpnicfSysBootIpeTable is empty.
.1.3.6.1.4.1.11.2.14.11.15.2.3.1.9.2.1,HPN-ICF-SYS-MAN-MIB::hpnicfSysBootPackageEntry,,not-accessible,hpnicfSysBootPackageIndex,current,,Entry of the image table.
.1.3.6.1.4.1.11.2.14.11.15.2.3.1.9.2.1.1,HPN-ICF-SYS-MAN-MIB::hpnicfSysBootPackageIndex,Integer32,not-accessible,,current,,Index of the software images. The index must be included in hpnicfSysPackageTable.
.1.3.6.1.4.1.11.2.14.11.15.2.3.1.9.2.1.2,HPN-ICF-SYS-MAN-MIB::hpnicfSysBootPackageRowStatus,INTEGER,read-create,,current,active(1):notInService(2):notReady(3):createAndGo(4):createAndWait(5):destroy(6),Row status of the image entry.
.1.3.6.1.4.1.11.2.14.11.15.2.3.1.9.3,HPN-ICF-SYS-MAN-MIB::hpnicfSysBootIpeTable,,not-accessible,,current,,Table of the IPE files to be set for startup. It should be used when hpnicfSysBootPackageTable is empty.
.1.3.6.1.4.1.11.2.14.11.15.2.3.1.9.3.1,HPN-ICF-SYS-MAN-MIB::hpnicfSysBootIpeEntry,,not-accessible,hpnicfSysBootIpeIndex,current,,Entry in the IPE file table.
.1.3.6.1.4.1.11.2.14.11.15.2.3.1.9.3.1.1,HPN-ICF-SYS-MAN-MIB::hpnicfSysBootIpeIndex,Integer32,not-accessible,,current,,IPE file index. The index must be included in hpnicfSysIpeFileTable.
.1.3.6.1.4.1.11.2.14.11.15.2.3.1.9.3.1.2,HPN-ICF-SYS-MAN-MIB::hpnicfSysBootIpeRowStatus,INTEGER,read-create,,current,active(1):notInService(2):notReady(3):createAndGo(4):createAndWait(5):destroy(6),Row status of the IPE file table entry.
.1.3.6.1.4.1.11.2.14.11.15.2.3.1.9.4,HPN-ICF-SYS-MAN-MIB::hpnicfSysSetBootImageResultTable,,not-accessible,,current,,Table of startup image operation results. This table shows the result for each card.
.1.3.6.1.4.1.11.2.14.11.15.2.3.1.9.4.1,HPN-ICF-SYS-MAN-MIB::hpnicfSysSetBootImageResultEntry,,not-accessible,hpnicfSysSetBootImageResultIndex,current,,Entry in the startup image operation result table.
.1.3.6.1.4.1.11.2.14.11.15.2.3.1.9.4.1.1,HPN-ICF-SYS-MAN-MIB::hpnicfSysSetBootImageResultIndex,Integer32,not-accessible,,current,,Index of a startup image operation result. It is identical to the entity index of each card.
.1.3.6.1.4.1.11.2.14.11.15.2.3.1.9.4.1.2,HPN-ICF-SYS-MAN-MIB::hpnicfSysSetBootImageResultStatusOfEachCard,INTEGER,read-only,,current,none(1):doing(2):success(3):failed(4),Status of the startup image set operation.
.1.3.6.1.4.1.11.2.14.11.15.2.3.1.9.4.1.3,HPN-ICF-SYS-MAN-MIB::hpnicfSysSetBootImageFailedReasonOfEachCard,OCTET,read-only,,current,,Reason of the startup image set failure for a card. It is empty if the operation was successful.
.1.3.6.1.4.1.11.2.14.11.15.2.3.2,HPN-ICF-SYS-MAN-MIB::hpnicfSystemManMIBNotifications,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.2.3.2.1,HPN-ICF-SYS-MAN-MIB::hpnicfSysClockChangedNotification,,,,,, A clock changed notification is generated when the current local date and time for the system has been manually changed. The value of hpnicfSysLocalClock reflects new date and time. 
.1.3.6.1.4.1.11.2.14.11.15.2.3.2.2,HPN-ICF-SYS-MAN-MIB::hpnicfSysReloadNotification,,,,,, A hpnicfSysReloadNotification will be sent before the corresponding entity is rebooted. It will also be sent if the entity fails to reboot because the clock has changed. 
.1.3.6.1.4.1.11.2.14.11.15.2.3.2.3,HPN-ICF-SYS-MAN-MIB::hpnicfSysStartUpNotification,,,,,, a hpnicfSysStartUpNotification trap will be sent when the system starts up with 'main' image file failed, a trap will be sent to indicate which type the current image file (I.e backup or secure)is. 
.1.3.6.1.4.1.11.2.14.11.15.2.3.3,HPN-ICF-SYS-MAN-MIB::hpnicfSystemManMIBConformance,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.2.3.3.1,HPN-ICF-SYS-MAN-MIB::hpnicfSystemManMIBCompliances,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.2.3.3.1.1,HPN-ICF-SYS-MAN-MIB::hpnicfSystemManMIBCompliance,,,,,, The compliance statement for entities which implement the system management MIB. 
.1.3.6.1.4.1.11.2.14.11.15.2.3.3.2,HPN-ICF-SYS-MAN-MIB::hpnicfSystemManMIBGroups,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.2.3.3.2.1,HPN-ICF-SYS-MAN-MIB::hpnicfSysClockGroup,,,,,,A collection of objects providing mandatory system clock information.
.1.3.6.1.4.1.11.2.14.11.15.2.3.3.2.2,HPN-ICF-SYS-MAN-MIB::hpnicfSysReloadGroup,,,,,,A collection of objects providing mandatory system reload.
.1.3.6.1.4.1.11.2.14.11.15.2.3.3.2.3,HPN-ICF-SYS-MAN-MIB::hpnicfSysImageGroup,,,,,,A collection of objects providing mandatory system image information.
.1.3.6.1.4.1.11.2.14.11.15.2.3.3.2.4,HPN-ICF-SYS-MAN-MIB::hpnicfSysCFGFileGroup,,,,,, A collection of objects providing mandatory system configuration file information. 
.1.3.6.1.4.1.11.2.14.11.15.2.3.3.2.5,HPN-ICF-SYS-MAN-MIB::hpnicfSysCurGroup,,,,,,A collection of system current status.
.1.3.6.1.4.1.11.2.14.11.15.2.3.3.2.6,HPN-ICF-SYS-MAN-MIB::hpnicfSystemManNotificationGroup,,,,,,A collection of notifications.
.1.3.6.1.4.1.11.2.14.11.15.2.3.3.2.7,HPN-ICF-SYS-MAN-MIB::hpnicfSystemBtmLoadGroup,,,,,,A collection of objects providing system update bootrom information.
.1.3.6.1.4.1.11.2.14.11.15.2.4,HPN-ICF-OID-MIB::hpnicfConfig,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.2.4.1,HPN-ICF-CONFIG-MAN-MIB::hpnicfConfigManObjects,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.2.4.1.1,HPN-ICF-CONFIG-MAN-MIB::hpnicfCfgLog,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.2.4.1.1.1,HPN-ICF-CONFIG-MAN-MIB::hpnicfCfgRunModifiedLast,TimeTicks,read-only,,current,,The object records the value of sysUpTime when the current configuration running in the system was last modified. The value will be changed immediately after system detects the current configuration has been changed.
.1.3.6.1.4.1.11.2.14.11.15.2.4.1.1.2,HPN-ICF-CONFIG-MAN-MIB::hpnicfCfgRunSavedLast,TimeTicks,read-only,,current,,The object records the value of sysUpTime when the current configuration running in the system was last saved. If the value of the object is smaller than hpnicfCfgRunModifiedLast, the current configuration has been modified but not saved.
.1.3.6.1.4.1.11.2.14.11.15.2.4.1.1.3,HPN-ICF-CONFIG-MAN-MIB::hpnicfCfgStartModifiedLast,TimeTicks,read-only,,current,,The object records the value of sysUpTime when the saved configuration used currently was last modified. It may have been modified by a save of the current configuration running in the system or other methods such as copy.
.1.3.6.1.4.1.11.2.14.11.15.2.4.1.1.4,HPN-ICF-CONFIG-MAN-MIB::hpnicfCfgLogLimitedEntries,Integer32,read-only,,current,,The object shows the maximum number of rows in hpnicfCfgLogTable. The value supported by the system is 10. 
.1.3.6.1.4.1.11.2.14.11.15.2.4.1.1.5,HPN-ICF-CONFIG-MAN-MIB::hpnicfCfgLogDeletedEntries,Counter32,read-only,,current,,The total number of rows deleted from hpnicfCfgLogTable.
.1.3.6.1.4.1.11.2.14.11.15.2.4.1.1.6,HPN-ICF-CONFIG-MAN-MIB::hpnicfCfgLogWantBackup,INTEGER,read-write,,current,true(1):false(2),Decide whether to backup the value of objects about hpnicfCfgLog.
.1.3.6.1.4.1.11.2.14.11.15.2.4.1.1.7,HPN-ICF-CONFIG-MAN-MIB::hpnicfCfgLogTable,,not-accessible,,current,,Table for logging configuration operation in device.
.1.3.6.1.4.1.11.2.14.11.15.2.4.1.1.7.1,HPN-ICF-CONFIG-MAN-MIB::hpnicfCfgLogEntry,,not-accessible,hpnicfCfgLogIndex,current,,Information of the entry.
.1.3.6.1.4.1.11.2.14.11.15.2.4.1.1.7.1.1,HPN-ICF-CONFIG-MAN-MIB::hpnicfCfgLogIndex,Integer32,not-accessible,,current,,Index of the table beginning from 1.
.1.3.6.1.4.1.11.2.14.11.15.2.4.1.1.7.1.2,HPN-ICF-CONFIG-MAN-MIB::hpnicfCfgLogTime,TimeTicks,read-only,,current,,Specify the sysUpTime when the config log was generated.
.1.3.6.1.4.1.11.2.14.11.15.2.4.1.1.7.1.3,HPN-ICF-CONFIG-MAN-MIB::hpnicfCfgLogSrcCmd,INTEGER,read-only,,current,cmdLine(1):snmp(2):other(3),Specify the source command which brought the log. Currently we provide the types of source: 1.cmdLine(1):configure log instigated by command line. 2.snmp(2):configure log instigated by snmp. 3.other(3):configure log instigated by other source unknown.
.1.3.6.1.4.1.11.2.14.11.15.2.4.1.1.7.1.4,HPN-ICF-CONFIG-MAN-MIB::hpnicfCfgLogSrcData,INTEGER,read-only,,current,erase(1):runningData(2):commandSource(3):startupData(4):local(5):netFtp(6):hotPlugging(7),The source of the configuration data event. erase erasing destination runningData operational data alive commandSource the command source itself startupData what the system will use next reboot local local NVRAM or flash netFtp FTP network transfer hotPlugging board is inserted or pulled out on line 
.1.3.6.1.4.1.11.2.14.11.15.2.4.1.1.7.1.5,HPN-ICF-CONFIG-MAN-MIB::hpnicfCfgLogDesData,INTEGER,read-only,,current,unknown(1):runningData(2):commandSource(3):startupData(4):local(5):netFtp(6):hotPlugging(7),The destination for the configuration data event. unknown unknown runningData operational data alive commandSource the command source itself startupData what the system will use next reboot local local NVRAM or flash netFtp FTP network transfer hotPlugging board is inserted or pulled out on line
.1.3.6.1.4.1.11.2.14.11.15.2.4.1.1.7.1.6,HPN-ICF-CONFIG-MAN-MIB::hpnicfCfgLogTerminalType,INTEGER,read-only,,current,notApplicable(1):unknown(2):console(3):terminal(4):virtual(5):auxiliary(6),Specifies the terminal type. If hpnicfCfgLogSrcCmd is not 'cmdLine', use 'notApplicable'. The value list: notApplicable(1): no meaning at this time. unknown(2): unknown terminal type. console(3): console interface. terminal(4): generic terminal. virtual(5): virtual terminal such as telnet. auxiliary(6): auxiliary interface.
.1.3.6.1.4.1.11.2.14.11.15.2.4.1.1.7.1.7,HPN-ICF-CONFIG-MAN-MIB::hpnicfCfgLogTerminalUser,OCTET,read-only,,current,,The name of logging user which is available when hpnicfCfgLogSrcCmd is 'cmdLine'. Other, a zero length string.
.1.3.6.1.4.1.11.2.14.11.15.2.4.1.1.7.1.8,HPN-ICF-CONFIG-MAN-MIB::hpnicfCfgLogTerminalNum,Integer32,read-only,,current,,Specifies the terminal number. If hpnicfCfgLogSrcCmd is not 'cmdLine', use '-1'
.1.3.6.1.4.1.11.2.14.11.15.2.4.1.1.7.1.9,HPN-ICF-CONFIG-MAN-MIB::hpnicfCfgLogTerminalLocation,OCTET,read-only,,current,,The location of logging user which is available when hpnicfCfgLogSrcCmd is 'cmdLine'. Other, a zero length string.
.1.3.6.1.4.1.11.2.14.11.15.2.4.1.1.7.1.10,HPN-ICF-CONFIG-MAN-MIB::hpnicfCfgLogCmdSrcAddress,IpAddress,read-only,,deprecated,,The address from which a request comes when the value of hpnicfCfgLogSrcCmd is 'snmp(2)'. The ip address of the remote system connected when the value of hpnicfCfgLogTerminalType is 'virtual'. Other, the value of 0.0.0.0. This object is replaced by hpnicfCfgLogCmdSrcAddrRev for it only support IPv4.
.1.3.6.1.4.1.11.2.14.11.15.2.4.1.1.7.1.11,HPN-ICF-CONFIG-MAN-MIB::hpnicfCfgLogVirHost,OCTET,read-only,,current,,The host name of remote system connected if hpnicfCfgLogTerminalType has the value of 'virtual'. Other, a zero length string.
.1.3.6.1.4.1.11.2.14.11.15.2.4.1.1.7.1.12,HPN-ICF-CONFIG-MAN-MIB::hpnicfCfgLogUserName,OCTET,read-only,,current,,The user name used when hpnicfCfgLogSrcData or hpnicfCfgLogDesData has the value of 'netFtp'. Other, a zero length string.
.1.3.6.1.4.1.11.2.14.11.15.2.4.1.1.7.1.13,HPN-ICF-CONFIG-MAN-MIB::hpnicfCfgLogServerAddress,IpAddress,read-only,,deprecated,,The remote server address when hpnicfCfgLogSrcData or hpnicfCfgLogDesData has the value of 'netFtp'. Other, a value of 0.0.0.0. This object is replaced by hpnicfCfgLogServerAddrRev for it only support IPv4.
.1.3.6.1.4.1.11.2.14.11.15.2.4.1.1.7.1.14,HPN-ICF-CONFIG-MAN-MIB::hpnicfCfgLogFile,OCTET,read-only,,current,,The current configuration file name when hpnicfCfgLogSrcData has the value of 'netFtp',and hpnicfCfgLogDesData has the value of 'startupData'. Other, a zero length string.
.1.3.6.1.4.1.11.2.14.11.15.2.4.1.1.7.1.15,HPN-ICF-CONFIG-MAN-MIB::hpnicfCfgLogCmdSrcAddrType,INTEGER,read-only,,current,unknown(0):ipv4(1):ipv6(2):ipv4z(3):ipv6z(4):dns(16),The type of IP address for the hpnicfCfgLogCmdSrcAddrRev.
.1.3.6.1.4.1.11.2.14.11.15.2.4.1.1.7.1.16,HPN-ICF-CONFIG-MAN-MIB::hpnicfCfgLogCmdSrcAddrRev,OCTET,read-only,,current,,The address from which a request comes when the value of hpnicfCfgLogSrcCmd is 'snmp(2)'. The ip address of the remote system connected when the value of hpnicfCfgLogTerminalType is 'virtual'. Other, the value of 0.0.0.0.
.1.3.6.1.4.1.11.2.14.11.15.2.4.1.1.7.1.17,HPN-ICF-CONFIG-MAN-MIB::hpnicfCfgLogCmdSrcAddrVPNName,OCTET,read-only,,current,,The VPN instance of this operation uses.
.1.3.6.1.4.1.11.2.14.11.15.2.4.1.1.7.1.18,HPN-ICF-CONFIG-MAN-MIB::hpnicfCfgLogServerAddrType,INTEGER,read-only,,current,unknown(0):ipv4(1):ipv6(2):ipv4z(3):ipv6z(4):dns(16),The type of IP address for the hpnicfCfgLogServerAddrRev.
.1.3.6.1.4.1.11.2.14.11.15.2.4.1.1.7.1.19,HPN-ICF-CONFIG-MAN-MIB::hpnicfCfgLogServerAddrRev,OCTET,read-only,,current,,The remote server address when hpnicfCfgLogSrcData or hpnicfCfgLogDesData has the value of 'netFtp'. Other, a value of 0.0.0.0.
.1.3.6.1.4.1.11.2.14.11.15.2.4.1.1.7.1.20,HPN-ICF-CONFIG-MAN-MIB::hpnicfCfgLogServerAddrVPNName,OCTET,read-only,,current,,The VPN instance of this operation uses.
.1.3.6.1.4.1.11.2.14.11.15.2.4.1.1.8,HPN-ICF-CONFIG-MAN-MIB::hpnicfCfgFirstTrapTime,TimeTicks,accessible-for-notify,,current,,Time when the first trap is sent.
.1.3.6.1.4.1.11.2.14.11.15.2.4.1.2,HPN-ICF-CONFIG-MAN-MIB::hpnicfCfgOperate,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.2.4.1.2.1,HPN-ICF-CONFIG-MAN-MIB::hpnicfCfgOperateGlobalEntryLimit,Integer32,read-only,,current,,The maximum number of copy entries that may be held in hpnicfCfgOperateTable. A particular setting does not guarantee that much data can be held.
.1.3.6.1.4.1.11.2.14.11.15.2.4.1.2.2,HPN-ICF-CONFIG-MAN-MIB::hpnicfCfgOperateEntryAgeOutTime,Integer32,read-write,,current,,The number of minutes an unactive hpnicfCfgOperateEntry SHOULD be kept in the hpnicfCfgOperateTable before it is active. The object is a fator taken account of when it needs delete some rows make room in hpnicfCfgOperateTable. 
.1.3.6.1.4.1.11.2.14.11.15.2.4.1.2.3,HPN-ICF-CONFIG-MAN-MIB::hpnicfCfgOperateResultGlobalEntryLimit,Integer32,read-write,,current,,The maximum number of copy entries that may be held in hpnicfCfgOperateResultTable. A particular setting does not guarantee that much data can be held.
.1.3.6.1.4.1.11.2.14.11.15.2.4.1.2.4,HPN-ICF-CONFIG-MAN-MIB::hpnicfCfgOperateTable,,not-accessible,,current,,A table of config-operation requests.
.1.3.6.1.4.1.11.2.14.11.15.2.4.1.2.4.1,HPN-ICF-CONFIG-MAN-MIB::hpnicfCfgOperateEntry,,not-accessible,hpnicfCfgOperateIndex,current,,An operate request entry.
.1.3.6.1.4.1.11.2.14.11.15.2.4.1.2.4.1.1,HPN-ICF-CONFIG-MAN-MIB::hpnicfCfgOperateIndex,Integer32,not-accessible,,current,,The unique index value of a row in this table.
.1.3.6.1.4.1.11.2.14.11.15.2.4.1.2.4.1.2,HPN-ICF-CONFIG-MAN-MIB::hpnicfCfgOperateType,INTEGER,read-create,,current,running2Startup(1):startup2Running(2):running2Net(3):net2Running(4):net2Startup(5):startup2Net(6),Specify the type of operation on configuration.
.1.3.6.1.4.1.11.2.14.11.15.2.4.1.2.4.1.3,HPN-ICF-CONFIG-MAN-MIB::hpnicfCfgOperateProtocol,INTEGER,read-create,,current,ftp(1):tftp(2):clusterftp(3):clustertftp(4),If the value of hpnicfCfgOperateType is running2Net,net2Running,net2Startup or startup2net, this node specify the protocol to be used for file transfer . The default protocol is ftp if no protocol is specified. And for other value of hpnicfCfgOperateType , this object may be ignored by the implementation. when clusterftp or clustertftp is selected, the hpnicfCfgOperateServerAddress needn't be set, the server address can be acquired automatically, the value of hpnicfCfgOperateServerAddress is uncertain during operation. both member switch and commander switch can use them if they support HGMP v2. 
.1.3.6.1.4.1.11.2.14.11.15.2.4.1.2.4.1.4,HPN-ICF-CONFIG-MAN-MIB::hpnicfCfgOperateFileName,OCTET,read-create,,current,,When the object of hpnicfCfgOperateType has the value of net2Startup, net2running or running2Net,the value must be specified. The file name may include the path if applicable. If the value of hpnicfCfgOperateType is net2Startup or net2running, this node specify the source file name of transfers.If the value of hpnicfCfgOperateType is running2Net , this node specify the destination file name of transfers. When hpnicfCfgOperateType has the value of startup2net,the object may not be created instead of using the file name of startup configuration file.
.1.3.6.1.4.1.11.2.14.11.15.2.4.1.2.4.1.5,HPN-ICF-CONFIG-MAN-MIB::hpnicfCfgOperateServerAddress,IpAddress,read-create,,deprecated,,When the operation type is running2Net,net2Running,net2Startup or startup2net , the ip address of the ftp/tftp server from/to which to download/upload must be specified. Values of 0.0.0.0 or FF.FF.FF.FF are not permitted. This object is replaced by hpnicfCfgOperateSrvAddrRev for it only support IPv4.
.1.3.6.1.4.1.11.2.14.11.15.2.4.1.2.4.1.6,HPN-ICF-CONFIG-MAN-MIB::hpnicfCfgOperateUserName,OCTET,read-create,,current,,When the operation type is running2Net,net2Running,net2Startup or startup2net , the user name for the ftp server from/to which to download/upload should be specified. The object must be created if hpnicfCfgOperateProtocol has the value of ftp. 
.1.3.6.1.4.1.11.2.14.11.15.2.4.1.2.4.1.7,HPN-ICF-CONFIG-MAN-MIB::hpnicfCfgOperateUserPassword,OCTET,read-create,,current,,When the operation type is running2Net,net2Running,net2Startup or startup2net , the user password for the ftp server from/to which to download/upload should be specified. The object must be created if hpnicfCfgOperateProtocol has the value of ftp. 
.1.3.6.1.4.1.11.2.14.11.15.2.4.1.2.4.1.8,HPN-ICF-CONFIG-MAN-MIB::hpnicfCfgOperateEndNotificationSwitch,INTEGER,read-create,,current,true(1):false(2),Specifies whether or not a notification should be issued on the completion of the operation.
.1.3.6.1.4.1.11.2.14.11.15.2.4.1.2.4.1.9,HPN-ICF-CONFIG-MAN-MIB::hpnicfCfgOperateRowStatus,INTEGER,read-create,,current,active(1):notInService(2):notReady(3):createAndGo(4):createAndWait(5):destroy(6),The status of this table entry. When the status is active all the object's value in the entry is not allowed to modified.
.1.3.6.1.4.1.11.2.14.11.15.2.4.1.2.4.1.10,HPN-ICF-CONFIG-MAN-MIB::hpnicfCfgOperateServerPort,Integer32,read-create,,current,,When the operation type is running2Net, net2Running, net2Startup or startup2Net, this node is used for specifying the remote port number. If the value is 0 or not specified, the known port number will be used.
.1.3.6.1.4.1.11.2.14.11.15.2.4.1.2.4.1.11,HPN-ICF-CONFIG-MAN-MIB::hpnicfCfgOperateSrvAddrType,INTEGER,read-create,,current,unknown(0):ipv4(1):ipv6(2):ipv4z(3):ipv6z(4):dns(16),The type of IP address for hpnicfCfgOperateSrvAddrRev.
.1.3.6.1.4.1.11.2.14.11.15.2.4.1.2.4.1.12,HPN-ICF-CONFIG-MAN-MIB::hpnicfCfgOperateSrvAddrRev,OCTET,read-create,,current,,When the operation type is running2Net,net2Running,net2Startup or startup2net , the ip address of the ftp/tftp server from/to which to download/upload must be specified.
.1.3.6.1.4.1.11.2.14.11.15.2.4.1.2.4.1.13,HPN-ICF-CONFIG-MAN-MIB::hpnicfCfgOperateSrvVPNName,OCTET,read-create,,current,,The VPN instance of this operation uses.
.1.3.6.1.4.1.11.2.14.11.15.2.4.1.2.5,HPN-ICF-CONFIG-MAN-MIB::hpnicfCfgOperateResultTable,,not-accessible,,current,,A table of config-operation requests result.
.1.3.6.1.4.1.11.2.14.11.15.2.4.1.2.5.1,HPN-ICF-CONFIG-MAN-MIB::hpnicfCfgOperateResultEntry,,not-accessible,hpnicfCfgOperateResultIndex,current,,The result entries of configuration operation requests.
.1.3.6.1.4.1.11.2.14.11.15.2.4.1.2.5.1.1,HPN-ICF-CONFIG-MAN-MIB::hpnicfCfgOperateResultIndex,Integer32,not-accessible,,current,,The index of Table, which is an incremental integer. The maximum value of the node is 2147483647. The agent should wrap the value to 1 and flush all the existing entries when the maximum value is reached.
.1.3.6.1.4.1.11.2.14.11.15.2.4.1.2.5.1.2,HPN-ICF-CONFIG-MAN-MIB::hpnicfCfgOperateResultOptIndex,Integer32,read-only,,current,,The operation index in the hpnicfCfgOperateTable.
.1.3.6.1.4.1.11.2.14.11.15.2.4.1.2.5.1.3,HPN-ICF-CONFIG-MAN-MIB::hpnicfCfgOperateResultOpType,INTEGER,read-only,,current,running2Startup(1):startup2Running(2):running2Net(3):net2Running(4):net2Startup(5):startup2Net(6),The operation type in the hpnicfCfgOperateTable.
.1.3.6.1.4.1.11.2.14.11.15.2.4.1.2.5.1.4,HPN-ICF-CONFIG-MAN-MIB::hpnicfCfgOperateState,INTEGER,read-only,,current,opInProgress(1):opSuccess(2):opInvalidOperation(3):opInvalidProtocol(4):opInvalidSourceName(5):opInvalidDestName(6):opInvalidServerAddress(7):opDeviceBusy(8):opDeviceOpenError(9):opDeviceError(10):opDeviceNotProgrammable(11):opDeviceFull(12):opFileOpenError(13):opFileTransferError(14):opFileChecksumError(15):opNoMemory(16):opAuthFail(17):opTimeOut(18):opUnknownFailure(19):opInvalidConfigFile(20):opSlaveFull(21):opCopyToSlaveFailure(22),The operation state type in the hpnicfCfgOperateTable.
.1.3.6.1.4.1.11.2.14.11.15.2.4.1.2.5.1.5,HPN-ICF-CONFIG-MAN-MIB::hpnicfCfgOperateTime,TimeTicks,read-only,,current,,Record the time taken for the operation. This object will be like a stopwatch, starting when the operation starts, and stopping when the operation completes.
.1.3.6.1.4.1.11.2.14.11.15.2.4.1.2.5.1.6,HPN-ICF-CONFIG-MAN-MIB::hpnicfCfgOperateEndTime,TimeTicks,read-only,,current,,The value of sysUpTime when the configuration operation is finished.
.1.3.6.1.4.1.11.2.14.11.15.2.4.1.2.5.1.7,HPN-ICF-CONFIG-MAN-MIB::hpnicfCfgOperFailReason,OCTET,read-only,,current,,The failure reasons of configuration operation.
.1.3.6.1.4.1.11.2.14.11.15.2.4.1.2.6,HPN-ICF-CONFIG-MAN-MIB::hpnicfCfgExecuteOperate,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.2.4.1.2.6.1,HPN-ICF-CONFIG-MAN-MIB::hpnicfCfgExecuteOperateResultEntryLimit,Integer32,read-write,,current,,The maximum number of ConfigOperationType entries that may be held in hpnicfCfgExecuteResultTable. A particular setting does not guarantee that much data can be held.
.1.3.6.1.4.1.11.2.14.11.15.2.4.1.2.6.2,HPN-ICF-CONFIG-MAN-MIB::hpnicfCfgExecuteResultTable,,not-accessible,,current,,A table of configuration execute result.
.1.3.6.1.4.1.11.2.14.11.15.2.4.1.2.6.2.1,HPN-ICF-CONFIG-MAN-MIB::hpnicfCfgExecuteResultEntry,,not-accessible,hpnicfCfgExecuteResultIndex,current,,The result entries of configuration execute operation.
.1.3.6.1.4.1.11.2.14.11.15.2.4.1.2.6.2.1.1,HPN-ICF-CONFIG-MAN-MIB::hpnicfCfgExecuteResultIndex,Integer32,not-accessible,,current,,The index of Table, which is an incremental integer. The maximum value of the node is 2147483647. The agent should wrap the value to 1 and flush all the existing entries when the maximum value is reached.
.1.3.6.1.4.1.11.2.14.11.15.2.4.1.2.6.2.1.2,HPN-ICF-CONFIG-MAN-MIB::hpnicfCfgExecuteResultOptIndex,Integer32,read-only,,current,,The configuration execute operation index in the hpnicfCfgExecuteResultTable.
.1.3.6.1.4.1.11.2.14.11.15.2.4.1.2.6.2.1.3,HPN-ICF-CONFIG-MAN-MIB::hpnicfCfgExecuteResultOpType,INTEGER,read-only,,current,running2Startup(1):startup2Running(2):running2Net(3):net2Running(4):net2Startup(5):startup2Net(6),The operation type in the hpnicfCfgExecuteResultTable.
.1.3.6.1.4.1.11.2.14.11.15.2.4.1.2.6.2.1.4,HPN-ICF-CONFIG-MAN-MIB::hpnicfCfgExecuteState,INTEGER,read-only,,current,opInProgress(1):opSuccess(2):opInvalidOperation(3):opInvalidProtocol(4):opInvalidSourceName(5):opInvalidDestName(6):opInvalidServerAddress(7):opDeviceBusy(8):opDeviceOpenError(9):opDeviceError(10):opDeviceNotProgrammable(11):opDeviceFull(12):opFileOpenError(13):opFileTransferError(14):opFileChecksumError(15):opNoMemory(16):opAuthFail(17):opTimeOut(18):opUnknownFailure(19):opInvalidConfigFile(20):opSlaveFull(21):opCopyToSlaveFailure(22),Record the status of the specified operation.
.1.3.6.1.4.1.11.2.14.11.15.2.4.1.2.6.2.1.5,HPN-ICF-CONFIG-MAN-MIB::hpnicfCfgExecuteTime,TimeTicks,read-only,,current,,Record the time of the execution starts.
.1.3.6.1.4.1.11.2.14.11.15.2.4.1.2.6.2.1.6,HPN-ICF-CONFIG-MAN-MIB::hpnicfCfgExecuteEndTime,TimeTicks,read-only,,current,,Record the time of the execution is finished.
.1.3.6.1.4.1.11.2.14.11.15.2.4.1.2.7,HPN-ICF-CONFIG-MAN-MIB::hpnicfCfgReset,INTEGER,read-write,,current,normal(1):reset(2),Reboot the device with the default configuration.
.1.3.6.1.4.1.11.2.14.11.15.2.4.1.2.8,HPN-ICF-CONFIG-MAN-MIB::hpnicfCfgReset2,INTEGER,read-write,,current,normal(0):reset(1),normal:do nothing. reset :reboot the device with the default configuration. 'normal' will be returned when getting. This node differs from hpnicfCfgReset in value.
.1.3.6.1.4.1.11.2.14.11.15.2.4.2,HPN-ICF-CONFIG-MAN-MIB::hpnicfConfigManNotifications,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.2.4.2.1,HPN-ICF-CONFIG-MAN-MIB::hpnicfCfgManEventlog,,,,,,The object calculates the checksum on the current config per 10 minutes and even if it is different from the saved config but if a trap has been sent with the same checksum then don't send again until the checksum is different.
.1.3.6.1.4.1.11.2.14.11.15.2.4.2.2,HPN-ICF-CONFIG-MAN-MIB::hpnicfCfgOperateCompletion,,,,,,When create hpnicfCfgOperateTable successfully, a notification may be generated.
.1.3.6.1.4.1.11.2.14.11.15.2.4.2.3,HPN-ICF-CONFIG-MAN-MIB::hpnicfCfgInvalidConfigFile,,,,,,When the configuration file is invalid, this notification will be generated.
.1.3.6.1.4.1.11.2.14.11.15.2.4.3,HPN-ICF-CONFIG-MAN-MIB::hpnicfConfigManConformance,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.2.4.3.1,HPN-ICF-CONFIG-MAN-MIB::hpnicfConfigManCompliances,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.2.4.3.1.1,HPN-ICF-CONFIG-MAN-MIB::hpnicfConfigManCompliance,,,,,,The statement of compliance for those implementing the configuration management MIB.
.1.3.6.1.4.1.11.2.14.11.15.2.4.3.2,HPN-ICF-CONFIG-MAN-MIB::hpnicfConfigManGroups,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.2.4.3.2.1,HPN-ICF-CONFIG-MAN-MIB::hpnicfCfgManLogGroup,,,,,,A collection of objects configuration log group.
.1.3.6.1.4.1.11.2.14.11.15.2.4.3.2.2,HPN-ICF-CONFIG-MAN-MIB::hpnicfCfgOperateGroup,,,,,,A group of configuration operation.
.1.3.6.1.4.1.11.2.14.11.15.2.4.3.2.3,HPN-ICF-CONFIG-MAN-MIB::hpnicfCfgManNotificationGroup,,,,,,Collection of notification objects.
.1.3.6.1.4.1.11.2.14.11.15.2.5,HPN-ICF-OID-MIB::hpnicfFlash,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.2.5.1,HPN-ICF-FLASH-MAN-MIB::hpnicfFlashManMIBObjects,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.2.5.1.1,HPN-ICF-FLASH-MAN-MIB::hpnicfFlashDevice,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.2.5.1.1.1,HPN-ICF-FLASH-MAN-MIB::hpnicfFlhSupportNum,Integer32,read-only,,current,, Specifies the total number of flash which the system supported. The MIB should not be loaded if there is no flash in the system and so the value here will be a minimum of 1. 
.1.3.6.1.4.1.11.2.14.11.15.2.5.1.1.2,HPN-ICF-FLASH-MAN-MIB::hpnicfFlashTable,,not-accessible,,current,, This table gives the properties of all the flashes on the system. 
.1.3.6.1.4.1.11.2.14.11.15.2.5.1.1.2.1,HPN-ICF-FLASH-MAN-MIB::hpnicfFlashEntry,,not-accessible,hpnicfFlhIndex,current,,The entry of hpnicfFlashTable.
.1.3.6.1.4.1.11.2.14.11.15.2.5.1.1.2.1.1,HPN-ICF-FLASH-MAN-MIB::hpnicfFlhIndex,Integer32,read-only,,current,, The index of hpnicfFlashTable. There are two parts for this index depicted as follows: 31 15 0 +++++++++++++++++++++++++++++++++++++++++ + entity index + random index + + ( bit 16..31 ) ( bit 0..15 ) + +++++++++++++++++++++++++++++++++++++++++ From bit0 to bit15 (two bytes), it has a minimum value of 1, and maximum value of the same as the value of hpnicfFlhSupportNum. From bit16 to bit31 (two bytes), it is the physical index the same as the entPhysicalIndex specified in ENTITY-MIB. 
.1.3.6.1.4.1.11.2.14.11.15.2.5.1.1.2.1.2,HPN-ICF-FLASH-MAN-MIB::hpnicfFlhSize,Integer32,read-only,,deprecated,, Specifies the total size of the flash indexed by hpnicfFlhIndex. The value should be zero if the flash is removed for a removable device. If the total size of the flash exceeds 2,147,483,647 bytes, hpnicfFlhHCSize specifies the actual size. 
.1.3.6.1.4.1.11.2.14.11.15.2.5.1.1.2.1.3,HPN-ICF-FLASH-MAN-MIB::hpnicfFlhPos,Integer32,read-only,,current,, The position of the flash device in system. This object is an index of entPhysicalTable in ENTITY-MIB. If the value of this object is 0, the main processor is indicated. 
.1.3.6.1.4.1.11.2.14.11.15.2.5.1.1.2.1.4,HPN-ICF-FLASH-MAN-MIB::hpnicfFlhName,OCTET,read-only,,current,,The flash name within the system.
.1.3.6.1.4.1.11.2.14.11.15.2.5.1.1.2.1.5,HPN-ICF-FLASH-MAN-MIB::hpnicfFlhChipNum,Integer32,read-only,,current,,The chip numbers in the flash.
.1.3.6.1.4.1.11.2.14.11.15.2.5.1.1.2.1.6,HPN-ICF-FLASH-MAN-MIB::hpnicfFlhDescr,OCTET,read-only,,current,,Description of the purpose of the flash in the system.
.1.3.6.1.4.1.11.2.14.11.15.2.5.1.1.2.1.8,HPN-ICF-FLASH-MAN-MIB::hpnicfFlhInitTime,TimeTicks,read-only,,current,, The initialization time for the flash component or partition, recorded using the system time. This will be the boot time for a fixed device. For a removable component or a partition, it will be the initialization time. 
.1.3.6.1.4.1.11.2.14.11.15.2.5.1.1.2.1.9,HPN-ICF-FLASH-MAN-MIB::hpnicfFlhRemovable,INTEGER,read-only,,current,true(1):false(2), The value indicates whether the flash indexed can be removed or not. The true(1) value indicates the flash device CAN be removed. 
.1.3.6.1.4.1.11.2.14.11.15.2.5.1.1.2.1.11,HPN-ICF-FLASH-MAN-MIB::hpnicfFlhPartitionBool,INTEGER,read-write,,current,true(1):false(2), The value indicates whether the flash indexed can be partitioned or not. The true(1) value indicates the flash CAN be partitioned. 
.1.3.6.1.4.1.11.2.14.11.15.2.5.1.1.2.1.12,HPN-ICF-FLASH-MAN-MIB::hpnicfFlhMinPartitionSize,Integer32,read-only,,current,, Minimum partition size supported. If hpnicfFlhDevicePartitionBool is false, the value of this object is the same as hpnicfFlhSize. 
.1.3.6.1.4.1.11.2.14.11.15.2.5.1.1.2.1.13,HPN-ICF-FLASH-MAN-MIB::hpnicfFlhMaxPartitions,Integer32,read-only,,current,, The maximum count of partitions which the system supports for this flash. If hpnicfFlhPartitionBool is false, the object value is 1. 
.1.3.6.1.4.1.11.2.14.11.15.2.5.1.1.2.1.14,HPN-ICF-FLASH-MAN-MIB::hpnicfFlhPartitionNum,Integer32,read-only,,current,, The actual number of partitions supported by the system for this flash. If hpnicfFlhPartitionBool is false, this value is 1. 
.1.3.6.1.4.1.11.2.14.11.15.2.5.1.1.2.1.15,HPN-ICF-FLASH-MAN-MIB::hpnicfFlhKbyteSize,Integer32,read-only,,current,, Specifies the total size of the flash device indexed by hpnicfFlhIndex. The value should be zero if the flash is removed for a removable device. 
.1.3.6.1.4.1.11.2.14.11.15.2.5.1.1.2.1.16,HPN-ICF-FLASH-MAN-MIB::hpnicfFlhHCSize,Counter64,read-only,,current,, Specifies the total size of the flash indexed by hpnicfFlhIndex. This node is a 64-bit substitute for hpnicfFlhSize. 
.1.3.6.1.4.1.11.2.14.11.15.2.5.1.1.3,HPN-ICF-FLASH-MAN-MIB::hpnicfFlashChips,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.2.5.1.1.3.1,HPN-ICF-FLASH-MAN-MIB::hpnicfFlhChipTable,,not-accessible,,current,, Table of properties for all flash chips. Used mainly for diagnostics. 
.1.3.6.1.4.1.11.2.14.11.15.2.5.1.1.3.1.1,HPN-ICF-FLASH-MAN-MIB::hpnicfFlhChipEntry,,not-accessible,hpnicfFlhIndex:hpnicfFlhChipSerialNo,current,,The entry of hpnicfFlhChipTable
.1.3.6.1.4.1.11.2.14.11.15.2.5.1.1.3.1.1.1,HPN-ICF-FLASH-MAN-MIB::hpnicfFlhChipSerialNo,Integer32,not-accessible,,current,,Index of hpnicfFlhChipTable.
.1.3.6.1.4.1.11.2.14.11.15.2.5.1.1.3.1.1.2,HPN-ICF-FLASH-MAN-MIB::hpnicfFlhChipID,OCTET,read-only,,current,, The manufacturer code (the upper byte) and device code (the lower byte) for a chip. Unknown chip code is presented as 00:00. 
.1.3.6.1.4.1.11.2.14.11.15.2.5.1.1.3.1.1.3,HPN-ICF-FLASH-MAN-MIB::hpnicfFlhChipDescr,OCTET,read-only,,current,, The description of the flash chip. 
.1.3.6.1.4.1.11.2.14.11.15.2.5.1.1.3.1.1.4,HPN-ICF-FLASH-MAN-MIB::hpnicfFlhChipWriteTimesLimit,Integer32,read-only,,current,, The limit for the number of write times (retries) for a flash chip. If the limit is exceeded an error should be reported by the management station. 
.1.3.6.1.4.1.11.2.14.11.15.2.5.1.1.3.1.1.5,HPN-ICF-FLASH-MAN-MIB::hpnicfFlhChipWriteTimes,Counter32,read-only,,current,, A count of write times (retries) for the flash chip since initialization. A count of 25 or more for a single chip indicates a write error. Management stations should note the value of this MIB before and after a write operation, and report any errors accordingly. 
.1.3.6.1.4.1.11.2.14.11.15.2.5.1.1.3.1.1.6,HPN-ICF-FLASH-MAN-MIB::hpnicfFlhChipEraseTimesLimit,Integer32,read-only,,current,, The limit for the number of erase times (retries) for a flash chip. If the limit is exceeded an error should be reported by the management station. 
.1.3.6.1.4.1.11.2.14.11.15.2.5.1.1.3.1.1.7,HPN-ICF-FLASH-MAN-MIB::hpnicfFlhChipEraseTimes,Counter32,read-only,,current,, A count of erase times (retries) for the flash chip since initialization. A count of 2000 or more for a single chip indicates a write error. Management stations should note the value of this MIB before and after an erase operation, and report any errors accordingly. 
.1.3.6.1.4.1.11.2.14.11.15.2.5.1.1.4,HPN-ICF-FLASH-MAN-MIB::hpnicfFlashPartitions,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.2.5.1.1.4.1,HPN-ICF-FLASH-MAN-MIB::hpnicfFlhPartitionTable,,not-accessible,,current,, Properties for the flash partitions. Minimum of one entry in this table. 
.1.3.6.1.4.1.11.2.14.11.15.2.5.1.1.4.1.1,HPN-ICF-FLASH-MAN-MIB::hpnicfFlhPartitionEntry,,not-accessible,hpnicfFlhIndex:hpnicfFlhPartIndex,current,, An entry of the hpnicfFlhPartitionTable.Indexed by flash number and partition number. 
.1.3.6.1.4.1.11.2.14.11.15.2.5.1.1.4.1.1.1,HPN-ICF-FLASH-MAN-MIB::hpnicfFlhPartIndex,Integer32,not-accessible,,current,, An index which specifies a sequenced partition in the system. 
.1.3.6.1.4.1.11.2.14.11.15.2.5.1.1.4.1.1.2,HPN-ICF-FLASH-MAN-MIB::hpnicfFlhPartFirstChip,Integer32,read-only,,current,, The first chip's sequence number in the partition, by which a chip can be indexed in chip table. 
.1.3.6.1.4.1.11.2.14.11.15.2.5.1.1.4.1.1.3,HPN-ICF-FLASH-MAN-MIB::hpnicfFlhPartLastChip,Integer32,read-only,,current,, The last chip's sequence number in the partition, by which a chip can be indexed in chip table. 
.1.3.6.1.4.1.11.2.14.11.15.2.5.1.1.4.1.1.4,HPN-ICF-FLASH-MAN-MIB::hpnicfFlhPartSpace,Integer32,read-only,,deprecated,, The total space of the flash partition. The following should be satisfied: hpnicfFlhPartSpace = n*hpnicfFlhMinPartitionSize If the total size of the flash partition exceeds 2,147,483,647 bytes, hpnicfFlhPartHCSpace specifies the actual size. 
.1.3.6.1.4.1.11.2.14.11.15.2.5.1.1.4.1.1.5,HPN-ICF-FLASH-MAN-MIB::hpnicfFlhPartSpaceFree,Gauge32,read-only,,deprecated,, The flash partition's free space. If the free space of the flash partition exceeds 2,147,483,647 bytes, hpnicfFlhPartHCSpaceFree specifies the actual free space. 
.1.3.6.1.4.1.11.2.14.11.15.2.5.1.1.4.1.1.6,HPN-ICF-FLASH-MAN-MIB::hpnicfFlhPartFileNum,Integer32,read-only,,current,,The number of all the files in the flash partition.
.1.3.6.1.4.1.11.2.14.11.15.2.5.1.1.4.1.1.7,HPN-ICF-FLASH-MAN-MIB::hpnicfFlhPartChecksumMethod,INTEGER,read-only,,current,simpleChecksum(1):undefined(2):simpleCRC(3),The Checksum method which the file system uses.
.1.3.6.1.4.1.11.2.14.11.15.2.5.1.1.4.1.1.8,HPN-ICF-FLASH-MAN-MIB::hpnicfFlhPartStatus,INTEGER,read-only,,current,readOnly(1):runFromFlash(2):readWrite(3),The flash partition status.
.1.3.6.1.4.1.11.2.14.11.15.2.5.1.1.4.1.1.9,HPN-ICF-FLASH-MAN-MIB::hpnicfFlhPartUpgradeMode,INTEGER,read-only,,current,unknown(1):rxbootFLH(2):direct(3),The upgrade mode of the Flash partition
.1.3.6.1.4.1.11.2.14.11.15.2.5.1.1.4.1.1.10,HPN-ICF-FLASH-MAN-MIB::hpnicfFlhPartName,OCTET,read-only,,current,,The name of the flash partition given by the system.
.1.3.6.1.4.1.11.2.14.11.15.2.5.1.1.4.1.1.11,HPN-ICF-FLASH-MAN-MIB::hpnicfFlhPartRequireErase,INTEGER,read-only,,current,true(1):false(2), Shows whether a write operation is conditional on partition erase. 
.1.3.6.1.4.1.11.2.14.11.15.2.5.1.1.4.1.1.12,HPN-ICF-FLASH-MAN-MIB::hpnicfFlhPartFileNameLen,Integer32,read-only,,current,,The maximum length of file name supported in the system.
.1.3.6.1.4.1.11.2.14.11.15.2.5.1.1.4.1.1.13,HPN-ICF-FLASH-MAN-MIB::hpnicfFlhPartBootable,INTEGER,read-only,,current,true(1):false(2),The value indicates whether the partition is a bootable partition. The true(1) value indicates a bootable partition. 
.1.3.6.1.4.1.11.2.14.11.15.2.5.1.1.4.1.1.14,HPN-ICF-FLASH-MAN-MIB::hpnicfFlhPartPathForGlobalOpt,INTEGER,read-write,,current,true(1):false(2),The value indicates whether the partition is used in a global file operation. The true(1) value indicates that in one global file operation files will be copied to or deleted from this partition. When hpnicfFlhPartPathForGlobalOpt in one entry is set to true(1), hpnicfFlhPartPathForGlobalOpt in other entries with the same entity index will be set to false(0). 
.1.3.6.1.4.1.11.2.14.11.15.2.5.1.1.4.1.1.15,HPN-ICF-FLASH-MAN-MIB::hpnicfFlhPartHCSpace,Counter64,read-only,,current,, The total space of the flash partition. This node is a 64-bit substitue for hpnicfFlhPartSpace. 
.1.3.6.1.4.1.11.2.14.11.15.2.5.1.1.4.1.1.16,HPN-ICF-FLASH-MAN-MIB::hpnicfFlhPartHCSpaceFree,Counter64,read-only,,current,, The flash partition's free space. This node is a 64-bit substitue for hpnicfFlhPartSpace. 
.1.3.6.1.4.1.11.2.14.11.15.2.5.1.1.4.2,HPN-ICF-FLASH-MAN-MIB::hpnicfFlhFiles,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.2.5.1.1.4.2.1,HPN-ICF-FLASH-MAN-MIB::hpnicfFlhFileTable,,not-accessible,,current,,Table of file information.
.1.3.6.1.4.1.11.2.14.11.15.2.5.1.1.4.2.1.1,HPN-ICF-FLASH-MAN-MIB::hpnicfFlhFileEntry,,not-accessible,hpnicfFlhIndex:hpnicfFlhPartIndex:hpnicfFlhFileIndex,current,, An entry representing a file. Indexed using flash number, partition number, and file number. 
.1.3.6.1.4.1.11.2.14.11.15.2.5.1.1.4.2.1.1.1,HPN-ICF-FLASH-MAN-MIB::hpnicfFlhFileIndex,Integer32,not-accessible,,current,,Index of the table, whose range is from 1 to 2147483647
.1.3.6.1.4.1.11.2.14.11.15.2.5.1.1.4.2.1.1.2,HPN-ICF-FLASH-MAN-MIB::hpnicfFlhFileName,OCTET,read-only,,current,,A valid file name supported by the file system.
.1.3.6.1.4.1.11.2.14.11.15.2.5.1.1.4.2.1.1.3,HPN-ICF-FLASH-MAN-MIB::hpnicfFlhFileSize,Integer32,read-only,,deprecated,, The file size in bytes excluding the file header of file system. The value should be greater than zero. If the file size exceeds 2,147,483,647 bytes, hpnicfFlhFileHCSize specifies the actual size. 
.1.3.6.1.4.1.11.2.14.11.15.2.5.1.1.4.2.1.1.4,HPN-ICF-FLASH-MAN-MIB::hpnicfFlhFileStatus,INTEGER,read-only,,current,deleted(1):invalidChecksum(2):valid(3), The status should be as follows: deleted(1): The file is in recycle bin. invalidChecksum(2): The checksum of file is invalid; valid(3): A valid file. 
.1.3.6.1.4.1.11.2.14.11.15.2.5.1.1.4.2.1.1.5,HPN-ICF-FLASH-MAN-MIB::hpnicfFlhFileChecksum,OCTET,read-only,,current,,The file checksum in the header of file.
.1.3.6.1.4.1.11.2.14.11.15.2.5.1.1.4.2.1.1.6,HPN-ICF-FLASH-MAN-MIB::hpnicfFlhFileHCSize,Counter64,read-only,,current,, The file size in bytes. This node is a 64-bit substitue for hpnicfFlhFileSize. 
.1.3.6.1.4.1.11.2.14.11.15.2.5.1.2,HPN-ICF-FLASH-MAN-MIB::hpnicfFlashOperate,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.2.5.1.2.1,HPN-ICF-FLASH-MAN-MIB::hpnicfFlhOpTable,,not-accessible,,current,,Table used to operate flash.
.1.3.6.1.4.1.11.2.14.11.15.2.5.1.2.1.1,HPN-ICF-FLASH-MAN-MIB::hpnicfFlhOpEntry,,not-accessible,hpnicfFlhOperIndex,current,, Note an operation can not be stopped until it is finished. If notification is configured, NMS will receive a notification at the end of the operation. Entries in the table will be removed automatically in 5 minutes. It can also be deleted by NMS directly. 
.1.3.6.1.4.1.11.2.14.11.15.2.5.1.2.1.1.1,HPN-ICF-FLASH-MAN-MIB::hpnicfFlhOperIndex,Integer32,not-accessible,,current,, Specifies the index of an entry. It is a random value when creating an entry. 
.1.3.6.1.4.1.11.2.14.11.15.2.5.1.2.1.1.2,HPN-ICF-FLASH-MAN-MIB::hpnicfFlhOperType,INTEGER,read-create,,current,net2FlashWithErase(1):net2FlashWithoutErase(2):flash2Net(3):delete(4):rename(5), Specifies the operation to be executed. net2FlashWithErase Copy a file to flash; erase flash beforehand. net2FlashWithoutErase Copy a file to flash; do not erase flash beforehand. flash2Net Copy a file from flash. delete Delete a file from flash, the file name is specified by hpnicfFlhOperSourceFile; rename Change a file's name. 
.1.3.6.1.4.1.11.2.14.11.15.2.5.1.2.1.1.3,HPN-ICF-FLASH-MAN-MIB::hpnicfFlhOperProtocol,INTEGER,read-create,,current,ftp(1):tftp(2):clusterftp(3):clustertftp(4), Specifies the protocol used to transfer file. The default protocol is ftp. when 'clusterftp' or 'clustertftp' is selected, the hpnicfFlhOperServerAddress needn't be set, the server address can be acquired automatically, the value of hpnicfFlhOperServerAddress is uncertain during operation. Both member switch and commander switch can use them if they support HGMP v2. 
.1.3.6.1.4.1.11.2.14.11.15.2.5.1.2.1.1.4,HPN-ICF-FLASH-MAN-MIB::hpnicfFlhOperServerAddress,IpAddress,read-create,,deprecated,, The address of remote host acting as server for operation. The default value is 255.255.255.255 This object is replaced by hpnicfFlhOperSrvAddrRev for it only support IPv4. 
.1.3.6.1.4.1.11.2.14.11.15.2.5.1.2.1.1.5,HPN-ICF-FLASH-MAN-MIB::hpnicfFlhOperServerUser,OCTET,read-create,,current,, When using ftp to transfer files, the user name must be specified through this node. 
.1.3.6.1.4.1.11.2.14.11.15.2.5.1.2.1.1.6,HPN-ICF-FLASH-MAN-MIB::hpnicfFlhOperPassword,OCTET,read-create,,current,, Remote user password for copying via ftp protocol. Optionally, This object may be ignored for protocols other than ftp. 
.1.3.6.1.4.1.11.2.14.11.15.2.5.1.2.1.1.7,HPN-ICF-FLASH-MAN-MIB::hpnicfFlhOperSourceFile,OCTET,read-create,,current,, Specifies the source file name to be transferred. It may be located on flash or remote server. It may include the file path if it is applicable. It must be specified. 
.1.3.6.1.4.1.11.2.14.11.15.2.5.1.2.1.1.8,HPN-ICF-FLASH-MAN-MIB::hpnicfFlhOperDestinationFile,OCTET,read-create,,current,, Specifies the destination file name. It may be located on flash or remote server. It may include the file path if it is applicable. If it is not specified, the destination file name is the same as source file name for application. 
.1.3.6.1.4.1.11.2.14.11.15.2.5.1.2.1.1.9,HPN-ICF-FLASH-MAN-MIB::hpnicfFlhOperStatus,INTEGER,read-only,,current,opInProgress(1):opSuccess(2):opInvalid(3):opInvalidProtocol(4):opInvalidSourceName(5):opInvalidDestName(6):opInvalidServerAddress(7):opDeviceBusy(8):opDeviceOpenError(9):opDeviceError(10):opDeviceNotProgrammable(11):opDeviceFull(12):opFileOpenError(13):opFileTransferError(14):opFileChecksumError(15):opNoMemory(16):opAuthFail(17):opTimeout(18):opUnknownFailure(19):opDeleteFileOpenError(20):opDeleteInvalidDevice(21):opDeleteInvalidFunction(22):opDeleteOperationError(23):opDeleteInvalidFileName(24):opDeleteDeviceBusy(25):opDeleteParaError(26):opDeleteInvalidPath(27):opDeleteFileNotExistInSlave(28):opDeleteFileFailedInSlave(29):opSlaveFull(30):opCopyToSlaveFailure(31),The status of operation.
.1.3.6.1.4.1.11.2.14.11.15.2.5.1.2.1.1.10,HPN-ICF-FLASH-MAN-MIB::hpnicfFlhOperEndNotification,INTEGER,read-create,,current,true(1):false(2), If the value of it is specified 'true', a notification will be generated at the end of the operation. Else no notification will be generated. 
.1.3.6.1.4.1.11.2.14.11.15.2.5.1.2.1.1.11,HPN-ICF-FLASH-MAN-MIB::hpnicfFlhOperProgress,TimeTicks,read-only,,current,,The progress described as the time taken for the operation. 
.1.3.6.1.4.1.11.2.14.11.15.2.5.1.2.1.1.12,HPN-ICF-FLASH-MAN-MIB::hpnicfFlhOperRowStatus,INTEGER,read-create,,current,active(1):notInService(2):notReady(3):createAndGo(4):createAndWait(5):destroy(6),The row status of this table entry.
.1.3.6.1.4.1.11.2.14.11.15.2.5.1.2.1.1.13,HPN-ICF-FLASH-MAN-MIB::hpnicfFlhOperServerPort,Integer32,read-create,,current,,The port of remote host acting as server for operation. If the value of this object is not specified, the server port is the known protocol port.
.1.3.6.1.4.1.11.2.14.11.15.2.5.1.2.1.1.14,HPN-ICF-FLASH-MAN-MIB::hpnicfFlhOperFailReason,OCTET,read-only,,current,,The failure reasons of operation.
.1.3.6.1.4.1.11.2.14.11.15.2.5.1.2.1.1.15,HPN-ICF-FLASH-MAN-MIB::hpnicfFlhOperSrvAddrType,INTEGER,read-create,,current,unknown(0):ipv4(1):ipv6(2):ipv4z(3):ipv6z(4):dns(16),The type of IP address for hpnicfFlhOperSrvAddrRev.
.1.3.6.1.4.1.11.2.14.11.15.2.5.1.2.1.1.16,HPN-ICF-FLASH-MAN-MIB::hpnicfFlhOperSrvAddrRev,OCTET,read-create,,current,,The address of remote host acting as server for operation.
.1.3.6.1.4.1.11.2.14.11.15.2.5.1.2.1.1.17,HPN-ICF-FLASH-MAN-MIB::hpnicfFlhOperSrvVPNName,OCTET,read-create,,current,,The VPN instance of this operation uses.
.1.3.6.1.4.1.11.2.14.11.15.2.5.1.3,HPN-ICF-FLASH-MAN-MIB::hpnicfFlashNotification,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.2.5.1.3.1,HPN-ICF-FLASH-MAN-MIB::hpnicfFlhOperNotification,,,,,, A hpnicfFlhOperNotification is sent at the completion of a flash copy operation if hpnicfFlhOperEndNotification is true. 
.1.3.6.1.4.1.11.2.14.11.15.2.5.2,HPN-ICF-FLASH-MAN-MIB::hpnicfFlashMIBConformance,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.2.5.2.1,HPN-ICF-FLASH-MAN-MIB::hpnicfFlhMIBCompliances,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.2.5.2.1.1,HPN-ICF-FLASH-MAN-MIB::hpnicfFlhMIBCompliance,,,,,, The statement of compliance for those implementing this MIB. 
.1.3.6.1.4.1.11.2.14.11.15.2.5.2.2,HPN-ICF-FLASH-MAN-MIB::hpnicfFlashMIBGroups,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.2.5.2.2.1,HPN-ICF-FLASH-MAN-MIB::hpnicfFlhGroup,,,,,,A collection of objects on Flash level information.
.1.3.6.1.4.1.11.2.14.11.15.2.5.2.2.3,HPN-ICF-FLASH-MAN-MIB::hpnicfFlhChipGroup,,,,,,A collection of objects on chip level information.
.1.3.6.1.4.1.11.2.14.11.15.2.5.2.2.4,HPN-ICF-FLASH-MAN-MIB::hpnicfFlhPartitionGroup,,,,,,A collection of objects providing on partition level information.
.1.3.6.1.4.1.11.2.14.11.15.2.5.2.2.5,HPN-ICF-FLASH-MAN-MIB::hpnicfFlhFileGroup,,,,,,A collection of objects on file level information.
.1.3.6.1.4.1.11.2.14.11.15.2.5.2.2.6,HPN-ICF-FLASH-MAN-MIB::hpnicfFlhOperationGroup,,,,,,A collection of objects of flash operations.
.1.3.6.1.4.1.11.2.14.11.15.2.5.2.2.7,HPN-ICF-FLASH-MAN-MIB::hpnicfFlhNotificationGroup,,,,,,The collection of notifications in the module
.1.3.6.1.4.1.11.2.14.11.15.2.6,HPN-ICF-OID-MIB::hpnicfEntityExtend,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.2.6.1,HPN-ICF-ENTITY-EXT-MIB::hpnicfEntityExtObjects,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.2.6.1.1,HPN-ICF-ENTITY-EXT-MIB::hpnicfEntityExtState,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.2.6.1.1.1,HPN-ICF-ENTITY-EXT-MIB::hpnicfEntityExtStateTable,,not-accessible,,current,,This table contains one row per physical entity, There is always at least one row for an 'overall' physical entity. The information in each row may be not include all the object in this table, because of the entity need not some of the information here.
.1.3.6.1.4.1.11.2.14.11.15.2.6.1.1.1.1,HPN-ICF-ENTITY-EXT-MIB::hpnicfEntityExtStateEntry,,not-accessible,hpnicfEntityExtPhysicalIndex,current,,The information about a particular physical entity.
.1.3.6.1.4.1.11.2.14.11.15.2.6.1.1.1.1.1,HPN-ICF-ENTITY-EXT-MIB::hpnicfEntityExtPhysicalIndex,Integer32,accessible-for-notify,,current,,The index of hpnicfEntityExtStateTable. This index is identical to entPhysicalIndex in ENTITY-MIB
.1.3.6.1.4.1.11.2.14.11.15.2.6.1.1.1.1.2,HPN-ICF-ENTITY-EXT-MIB::hpnicfEntityExtAdminStatus,INTEGER,read-write,,current,notSupported(1):locked(2):shuttingDown(3):unlocked(4),The administrative state for this object.
.1.3.6.1.4.1.11.2.14.11.15.2.6.1.1.1.1.3,HPN-ICF-ENTITY-EXT-MIB::hpnicfEntityExtOperStatus,INTEGER,read-only,,current,notSupported(1):disabled(2):enabled(3):dangerous(4),The operate state for this object.
.1.3.6.1.4.1.11.2.14.11.15.2.6.1.1.1.1.4,HPN-ICF-ENTITY-EXT-MIB::hpnicfEntityExtStandbyStatus,INTEGER,read-only,,current,notSupported(1):hotStandby(2):coldStandby(3):providingService(4),This object is used for monitoring standby status. Not all entities support this object.
.1.3.6.1.4.1.11.2.14.11.15.2.6.1.1.1.1.5,HPN-ICF-ENTITY-EXT-MIB::hpnicfEntityExtAlarmLight,BITS,read-only,,current,notSupported(0):underRepair(1):critical(2):major(3):minor(4):alarmOutstanding(5):warning(6):indeterminate(7),The alarm status for this entity. It does not include the severity of alarms raised on child components. In this condition, there will be a alarm light on the entity, the object should have the same status with it.
.1.3.6.1.4.1.11.2.14.11.15.2.6.1.1.1.1.6,HPN-ICF-ENTITY-EXT-MIB::hpnicfEntityExtCpuUsage,Integer32,read-only,,current,,The CPU usage for this entity. Generally, the overall CPU usage on the entity is calculated, independent of the number of CPUs on the entity.
.1.3.6.1.4.1.11.2.14.11.15.2.6.1.1.1.1.7,HPN-ICF-ENTITY-EXT-MIB::hpnicfEntityExtCpuUsageThreshold,Integer32,read-write,,current,,The threshold for the CPU usage. When the CPU usage exceeds the threshold, a notification will be sent.
.1.3.6.1.4.1.11.2.14.11.15.2.6.1.1.1.1.8,HPN-ICF-ENTITY-EXT-MIB::hpnicfEntityExtMemUsage,Integer32,read-only,,current,,The memory usage for the entity. This object indicates what percent of memory are used.
.1.3.6.1.4.1.11.2.14.11.15.2.6.1.1.1.1.9,HPN-ICF-ENTITY-EXT-MIB::hpnicfEntityExtMemUsageThreshold,Integer32,read-write,,current,,The threshold for the Memory usage, When the memory usage exceeds the threshold, a notification will be sent.
.1.3.6.1.4.1.11.2.14.11.15.2.6.1.1.1.1.10,HPN-ICF-ENTITY-EXT-MIB::hpnicfEntityExtMemSize,Unsigned32,read-only,,current,,The size of memory for the entity. If the amount of memory exceeds 4,294,967,295 bytes, the value remains 4,294,967,295 bytes.
.1.3.6.1.4.1.11.2.14.11.15.2.6.1.1.1.1.11,HPN-ICF-ENTITY-EXT-MIB::hpnicfEntityExtUpTime,Integer32,read-only,,current,,The uptime for the entity. The meaning of uptime is when the entity is up, and the value of the object will add 1 seconds while the entity is running.
.1.3.6.1.4.1.11.2.14.11.15.2.6.1.1.1.1.12,HPN-ICF-ENTITY-EXT-MIB::hpnicfEntityExtTemperature,Integer32,read-only,,current,,The temperature for the entity.
.1.3.6.1.4.1.11.2.14.11.15.2.6.1.1.1.1.13,HPN-ICF-ENTITY-EXT-MIB::hpnicfEntityExtTemperatureThreshold,Integer32,read-write,,current,,The threshold for the temperature. When the temperature exceeds the threshold, a notification will be sent.
.1.3.6.1.4.1.11.2.14.11.15.2.6.1.1.1.1.14,HPN-ICF-ENTITY-EXT-MIB::hpnicfEntityExtVoltage,Integer32,read-only,,current,,The voltage for the entity.
.1.3.6.1.4.1.11.2.14.11.15.2.6.1.1.1.1.15,HPN-ICF-ENTITY-EXT-MIB::hpnicfEntityExtVoltageLowThreshold,Integer32,read-write,,current,,The low-threshold for the voltage. When voltage is lower than low-threshold, a notification will be sent.
.1.3.6.1.4.1.11.2.14.11.15.2.6.1.1.1.1.16,HPN-ICF-ENTITY-EXT-MIB::hpnicfEntityExtVoltageHighThreshold,Integer32,read-write,,current,,The high-threshold for the voltage. When voltage greater than high-threshold, a notification will be sent.
.1.3.6.1.4.1.11.2.14.11.15.2.6.1.1.1.1.17,HPN-ICF-ENTITY-EXT-MIB::hpnicfEntityExtCriticalTemperatureThreshold,Integer32,read-write,,current,, The threshold for the critical Temperature. When temperature exceeds the critical temperature, a notification will be sent.
.1.3.6.1.4.1.11.2.14.11.15.2.6.1.1.1.1.18,HPN-ICF-ENTITY-EXT-MIB::hpnicfEntityExtMacAddress,OCTET,read-only,,current,,MAC Address of the entity.
.1.3.6.1.4.1.11.2.14.11.15.2.6.1.1.1.1.19,HPN-ICF-ENTITY-EXT-MIB::hpnicfEntityExtErrorStatus,INTEGER,read-only,,current,notSupported(1):normal(2):postFailure(3):entityAbsent(4):poeError(11):stackError(21):stackPortBlocked(22):stackPortFailed(23):sfpRecvError(31):sfpSendError(32):sfpBothError(33):fanError(41):psuError(51):rpsError(61):moduleFaulty(71):sensorError(81):hardwareFaulty(91),Indicate the error state of this entity object. Now it only supports Port, general power supply, RPS power supply and board/Subcard. It may have one of these values. The following four values can be used for all kinds of entities. notSupported(1) means this entity cannot support this function. normal(2) means the statement of this entity is normal. for ports, it doesn't differentiate 10M/s, 100M/s, 1000M/s, duplex and half-duplex. For fan, power supply and board-Subcard, it means their states are normal. postFailure(3) means the entity fails to POST. entityAbsent(4) means the entity is absent now. The following values is depended on the entity . For Port entities, it may have the following values. If its POST is failure, then the value of the instance will be postFailure(3), otherwise the value will be normal(2). If enable power supply over Ethernet on this port is failure, the value of this instance will be poeError(11), otherwise it will be normal(2). For stack port, if it connects to another stack port normally, and these two units merge into one stack, then the value of this instance will be normal(2). If something wrong occurs and the unit cannot merge into stack, the value of this instance will be stackPortFailed(23). If the stack port forms resilient daisy chain with another stack port on the other unit, the value of this instance will be stackPortBlocked(22). For SFP ports, if it fail to receive, the value of this instance will be sfpRecvError(31), if it fail to send, the value is sfpSendError(32), if it fail to send and receive, the value is sfpBothError(33), otherwise it will be normal(2). fanError(41) means that the fan stops working. psuError(51) means that the Power Supply Unit is in the state of fault. rpsError(61) means the RPS is in the state of fault. moduleFaulty(71) means the Module is in the state of fault. sensorError(81) means the sensor is in the state of fault. hardwareFaulty(91) means the hardware of specified entity is in the state of fault. NMS must be compatible with the states which may be added in the future.
.1.3.6.1.4.1.11.2.14.11.15.2.6.1.1.1.1.20,HPN-ICF-ENTITY-EXT-MIB::hpnicfEntityExtCpuMaxUsage,Integer32,read-only,,current,,The maximal CPU usage for the entity in the period of time.
.1.3.6.1.4.1.11.2.14.11.15.2.6.1.1.1.1.21,HPN-ICF-ENTITY-EXT-MIB::hpnicfEntityExtLowerTemperatureThreshold,Integer32,read-write,,current,,The threshold for the lower Temperature. When temperature runs under the threshold, a notification will be sent.
.1.3.6.1.4.1.11.2.14.11.15.2.6.1.1.1.1.22,HPN-ICF-ENTITY-EXT-MIB::hpnicfEntityExtShutdownTemperatureThreshold,Integer32,read-write,,current,,The threshold for the shutdown Temperature. When temperature exceeds the threshold, a notification will be sent and the entity will be shutdown.
.1.3.6.1.4.1.11.2.14.11.15.2.6.1.1.1.1.23,HPN-ICF-ENTITY-EXT-MIB::hpnicfEntityExtPhyMemSize,Unsigned32,read-only,,current,,The memory size of entity. This is the physical attribute of entity.
.1.3.6.1.4.1.11.2.14.11.15.2.6.1.1.1.1.24,HPN-ICF-ENTITY-EXT-MIB::hpnicfEntityExtPhyCpuFrequency,Integer32,read-only,,current,,The CPU frequency of entity. Unit of measure is MHZ.
.1.3.6.1.4.1.11.2.14.11.15.2.6.1.1.1.1.25,HPN-ICF-ENTITY-EXT-MIB::hpnicfEntityExtFirstUsedDate,OCTET,read-only,,current,,The first used date of the entity.
.1.3.6.1.4.1.11.2.14.11.15.2.6.1.1.1.1.26,HPN-ICF-ENTITY-EXT-MIB::hpnicfEntityExtCpuAvgUsage,Integer32,read-only,,current,,The average CPU usage for the entity in a period of time.
.1.3.6.1.4.1.11.2.14.11.15.2.6.1.1.1.1.27,HPN-ICF-ENTITY-EXT-MIB::hpnicfEntityExtMemAvgUsage,Integer32,read-only,,current,,The average memory usage for the entity in a period of time.
.1.3.6.1.4.1.11.2.14.11.15.2.6.1.1.1.1.28,HPN-ICF-ENTITY-EXT-MIB::hpnicfEntityExtMemType,OCTET,read-only,,current,,The memory type of entity.
.1.3.6.1.4.1.11.2.14.11.15.2.6.1.1.1.1.29,HPN-ICF-ENTITY-EXT-MIB::hpnicfEntityExtCriticalLowerTemperatureThreshold,Integer32,read-write,,current,,The threshold for the critical Temperature. When temperature exceeds the critical lower temperature, a notification will be sent.
.1.3.6.1.4.1.11.2.14.11.15.2.6.1.1.1.1.30,HPN-ICF-ENTITY-EXT-MIB::hpnicfEntityExtShutdownLowerTemperatureThreshold,Integer32,read-write,,current,,The threshold for the shutdown Temperature. When temperature exceeds the lower threshold, a notification will be sent and the entity will be shutdown.
.1.3.6.1.4.1.11.2.14.11.15.2.6.1.1.1.1.31,HPN-ICF-ENTITY-EXT-MIB::hpnicfEntityExtCpuUsageRecoverThreshold,Integer32,read-write,,current,,The recover threshold for the CPU usage. When the CPU usage falls down to the threshold, a notification is sent. The hpnicfEntityExtCpuUsageRecoverThreshold must be less than or equal to the hpnicfEntityExtCpuUsageThreshold.
.1.3.6.1.4.1.11.2.14.11.15.2.6.1.1.1.1.32,HPN-ICF-ENTITY-EXT-MIB::hpnicfEntityExtMemSizeRev,Counter64,read-only,,current,,Size of memory space for the entity. This node is used to replace hpnicfEntityExtMemSize.
.1.3.6.1.4.1.11.2.14.11.15.2.6.1.1.1.1.33,HPN-ICF-ENTITY-EXT-MIB::hpnicfEntityExtCpuUsageIn1Minute,Integer32,read-only,,current,,The CPU usage in last one minute for this entity. Generally, the overall CPU usage on the entity is calculated, independent of the number of CPUs on the entity.
.1.3.6.1.4.1.11.2.14.11.15.2.6.1.1.1.1.34,HPN-ICF-ENTITY-EXT-MIB::hpnicfEntityExtCpuUsageIn5Minutes,Integer32,read-only,,current,,The CPU usage in last five minutes for this entity. Generally, the overall CPU usage on the entity is calculated, independent of the number of CPUs on the entity.
.1.3.6.1.4.1.11.2.14.11.15.2.6.1.2,HPN-ICF-ENTITY-EXT-MIB::hpnicfEntityExtManu,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.2.6.1.2.1,HPN-ICF-ENTITY-EXT-MIB::hpnicfEntityExtManuTable,,not-accessible,,current,,The table about device manufacture information.
.1.3.6.1.4.1.11.2.14.11.15.2.6.1.2.1.1,HPN-ICF-ENTITY-EXT-MIB::hpnicfEntityExtManuEntry,,not-accessible,hpnicfEntityExtManuPhysicalIndex,current,,The device manufacture information about a particular physical entity.
.1.3.6.1.4.1.11.2.14.11.15.2.6.1.2.1.1.1,HPN-ICF-ENTITY-EXT-MIB::hpnicfEntityExtManuPhysicalIndex,Integer32,accessible-for-notify,,current,,The index of hpnicfEntityExtManuTable. This index is identical to entPhysicalIndex in ENTITY-MIB.
.1.3.6.1.4.1.11.2.14.11.15.2.6.1.2.1.1.2,HPN-ICF-ENTITY-EXT-MIB::hpnicfEntityExtManuSerialNum,OCTET,read-only,,current,,Manufacture serial number. The manufacture serial number of the entity such as chassis, module, and so on. It is got from the device when manufacturing. For low level box-device, the manufacture serial number is the device-number of System Control Board(SCB for short), it is written into the SCB directly; for middle level or high level frame-device, the manufacture serial number is the device-numbers of SCB and Service Board, because the SCB, Service Board and chassis are separate to sale and the device-number of chassis cannot be written into board.
.1.3.6.1.4.1.11.2.14.11.15.2.6.1.2.1.1.3,HPN-ICF-ENTITY-EXT-MIB::hpnicfEntityExtManuBuildInfo,OCTET,read-only,,current,,Device version information. The device version information of the entity such as chassis, module, and so on. It consists of software version information and hardware version information.
.1.3.6.1.4.1.11.2.14.11.15.2.6.1.2.1.1.4,HPN-ICF-ENTITY-EXT-MIB::hpnicfEntityExtManuBOM,OCTET,read-only,,current,,Device BOM code. The device BOM code of the entity such as chassis, module, and so on. It is the component code of ERP system, which can be disassembled from device-number.
.1.3.6.1.4.1.11.2.14.11.15.2.6.1.2.1.1.5,HPN-ICF-ENTITY-EXT-MIB::hpnicfEntityExtMacAddressCount,Unsigned32,read-only,,current,,MAC address count. The count of MAC addresses of the entity, such as chassis, module, or port, and so on.
.1.3.6.1.4.1.11.2.14.11.15.2.6.1.3,HPN-ICF-ENTITY-EXT-MIB::hpnicfEntityExtPower,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.2.6.1.3.1,HPN-ICF-ENTITY-EXT-MIB::hpnicfEntityExtPowerTable,,not-accessible,,current,,This table describes the power information of all the physical entity on the device, such as the fans, the subcards, the boards, etc.
.1.3.6.1.4.1.11.2.14.11.15.2.6.1.3.1.1,HPN-ICF-ENTITY-EXT-MIB::hpnicfEntityExtPowerEntry,,not-accessible,hpnicfEntityExtPowerPhysicalIndex,current,,The entity power information about a particular physical entity.
.1.3.6.1.4.1.11.2.14.11.15.2.6.1.3.1.1.1,HPN-ICF-ENTITY-EXT-MIB::hpnicfEntityExtPowerPhysicalIndex,Integer32,accessible-for-notify,,current,,The index of hpnicfEntityExtPowerTable. This index is identical to entPhysicalIndex in ENTITY-MIB.
.1.3.6.1.4.1.11.2.14.11.15.2.6.1.3.1.1.2,HPN-ICF-ENTITY-EXT-MIB::hpnicfEntityExtNominalPower,Gauge32,read-only,,current,,The nominal power of the entity expressed in milliWatts.
.1.3.6.1.4.1.11.2.14.11.15.2.6.1.3.1.1.3,HPN-ICF-ENTITY-EXT-MIB::hpnicfEntityExtCurrentPower,Gauge32,read-only,,current,,The measured usage power of the entity expressed in milliWatts.
.1.3.6.1.4.1.11.2.14.11.15.2.6.1.3.1.1.4,HPN-ICF-ENTITY-EXT-MIB::hpnicfEntityExtAveragePower,Integer32,read-write,,current,,The average power consumed by the entity expressed in milliWatts. Writing a value of zero to this object resets its value to zero. Writing any other value to this object has no effect on its value and an error is returned.
.1.3.6.1.4.1.11.2.14.11.15.2.6.1.3.1.1.5,HPN-ICF-ENTITY-EXT-MIB::hpnicfEntityExtPeakPower,Integer32,read-write,,current,,The peak power consumed by the entity expressed in milliWatts. Writing a value of zero to this object resets its value to zero. Writing any other value to this object has no effect on its value and an error is returned.
.1.3.6.1.4.1.11.2.14.11.15.2.6.1.4,HPN-ICF-ENTITY-EXT-MIB::hpnicfProcessObjects,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.2.6.1.4.1,HPN-ICF-ENTITY-EXT-MIB::hpnicfProcessTable,,not-accessible,,current,,The Table describes the information about a particular process, namely a task.
.1.3.6.1.4.1.11.2.14.11.15.2.6.1.4.1.1,HPN-ICF-ENTITY-EXT-MIB::hpnicfProcessEntry,,not-accessible,hpnicfProcessID,current,,The information about a particular process, namely a task.
.1.3.6.1.4.1.11.2.14.11.15.2.6.1.4.1.1.1,HPN-ICF-ENTITY-EXT-MIB::hpnicfProcessID,Unsigned32,read-only,,current,,This object indicates the identifier of process, namely task ID in system.
.1.3.6.1.4.1.11.2.14.11.15.2.6.1.4.1.1.2,HPN-ICF-ENTITY-EXT-MIB::hpnicfProcessName,OCTET,read-only,,current,,This object indicates the process name.
.1.3.6.1.4.1.11.2.14.11.15.2.6.1.4.1.1.3,HPN-ICF-ENTITY-EXT-MIB::hpnicfProcessUtil5Min,Unsigned32,read-only,,current,,This object provides a general idea of how busy a process caused the processor to be over a 5 minute period. The ratio is calculated by the overall CPU usage caused by the process.
.1.3.6.1.4.1.11.2.14.11.15.2.6.2,HPN-ICF-ENTITY-EXT-MIB::hpnicfEntityExtTraps,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.2.6.2.0,HPN-ICF-ENTITY-EXT-MIB::hpnicfEntityExtTrapsPrefix,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.2.6.2.0.1,HPN-ICF-ENTITY-EXT-MIB::hpnicfEntityExtTemperatureThresholdNotification,,,,,,The hpnicfEntityExtTemperatureThresholdNotification indicates the temperature exceeded the threshold. In this condition, user should check the status and the environment of the entity, sometimes it happens because of the failure of air-condition.
.1.3.6.1.4.1.11.2.14.11.15.2.6.2.0.2,HPN-ICF-ENTITY-EXT-MIB::hpnicfEntityExtVoltageLowThresholdNotification,,,,,,The hpnicfEntityExtVoltageLowThresholdNotification indicates the voltage is lower than the threshold. If the voltage is lower too much than the entity needs, the entity will halt.
.1.3.6.1.4.1.11.2.14.11.15.2.6.2.0.3,HPN-ICF-ENTITY-EXT-MIB::hpnicfEntityExtVoltageHighThresholdNotification,,,,,,The hpnicfEntityExtVoltageHighThresholdNotification indicates the voltage is higher than the threshold. If the voltage is higher too much than the entity needs, The entity may be damaged by the high voltage.
.1.3.6.1.4.1.11.2.14.11.15.2.6.2.0.4,HPN-ICF-ENTITY-EXT-MIB::hpnicfEntityExtCpuUsageThresholdNotfication,,,,,,The hpnicfEntityExtCpuUsageThresholdNotfication indicates the entity is overloaded.
.1.3.6.1.4.1.11.2.14.11.15.2.6.2.0.5,HPN-ICF-ENTITY-EXT-MIB::hpnicfEntityExtMemUsageThresholdNotification,,,,,,The hpnicfEntityExtMemUsageThresholdNotification indicates the entity is overloaded.
.1.3.6.1.4.1.11.2.14.11.15.2.6.2.0.6,HPN-ICF-ENTITY-EXT-MIB::hpnicfEntityExtOperEnabled,,,,,,The trap indicates the entity is operable at present.
.1.3.6.1.4.1.11.2.14.11.15.2.6.2.0.7,HPN-ICF-ENTITY-EXT-MIB::hpnicfEntityExtOperDisabled,,,,,,The trap indicates the entity is not operable at present.
.1.3.6.1.4.1.11.2.14.11.15.2.6.2.0.8,HPN-ICF-ENTITY-EXT-MIB::hpnicfEntityExtCriticalTemperatureThresholdNotification,,,,,,The hpnicfEntityExtCriticalTemperatureThresholdNotification indicates the temperature exceeds the critical temperature. In this condition, user should check the status and the environment of the entity, sometimes it happens because of the failure of air-condition.
.1.3.6.1.4.1.11.2.14.11.15.2.6.2.0.9,HPN-ICF-ENTITY-EXT-MIB::hpnicfEntityExtSFPAlarmOn,,,,,,The trap is generated when the SFP module fails or runs abnormally for some particular reason.
.1.3.6.1.4.1.11.2.14.11.15.2.6.2.0.10,HPN-ICF-ENTITY-EXT-MIB::hpnicfEntityExtSFPAlarmOff,,,,,,The trap is generated when the SFP module restores to normal status.
.1.3.6.1.4.1.11.2.14.11.15.2.6.2.0.11,HPN-ICF-ENTITY-EXT-MIB::hpnicfEntityExtSFPPhony,,,,,,This module is NOT sold by authorized manufacturer. The normal function of the device or assume the maintenance responsibility thereof will NOT be guaranteed. The trap is generated periodically after a phony module has been found.
.1.3.6.1.4.1.11.2.14.11.15.2.6.2.0.12,HPN-ICF-ENTITY-EXT-MIB::hpnicfEntityInsert,,,,,,The trap is generated when a removable entity inserting to device.
.1.3.6.1.4.1.11.2.14.11.15.2.6.2.0.13,HPN-ICF-ENTITY-EXT-MIB::hpnicfEntityRemove,,,,,,The trap is generated when a removable entity removing from device.
.1.3.6.1.4.1.11.2.14.11.15.2.6.2.0.14,HPN-ICF-ENTITY-EXT-MIB::hpnicfEntityExtForcedPowerOff,,,,,,The trap indicates the entity is forced to power off.
.1.3.6.1.4.1.11.2.14.11.15.2.6.2.0.15,HPN-ICF-ENTITY-EXT-MIB::hpnicfEntityExtForcedPowerOn,,,,,,The trap indicates the entity is forced to power on.
.1.3.6.1.4.1.11.2.14.11.15.2.6.2.0.16,HPN-ICF-ENTITY-EXT-MIB::hpnicfEntityExtFaultAlarmOn,,,,,,The trap indicates a fault occurs on the specified entity.
.1.3.6.1.4.1.11.2.14.11.15.2.6.2.0.17,HPN-ICF-ENTITY-EXT-MIB::hpnicfEntityExtFaultAlarmOff,,,,,,The trap indicates a fault disappears on the specified entity.
.1.3.6.1.4.1.11.2.14.11.15.2.6.2.0.18,HPN-ICF-ENTITY-EXT-MIB::hpnicfEntityExtResourceLack,,,,,,The trap indicates that a kind of resource is not enough on the specified entity.
.1.3.6.1.4.1.11.2.14.11.15.2.6.2.0.19,HPN-ICF-ENTITY-EXT-MIB::hpnicfEntityExtResourceEnough,,,,,,The trap indicates that the entity recovers from the status of no enough resource.
.1.3.6.1.4.1.11.2.14.11.15.2.6.2.0.20,HPN-ICF-ENTITY-EXT-MIB::hpnicfEntityExtTemperatureLower,,,,,,The trap indicates the temperature of a specified entity is under the lower threshold. In this condition, user should check the status and the environment of the entity, sometimes it goes wrong for some reason.
.1.3.6.1.4.1.11.2.14.11.15.2.6.2.0.21,HPN-ICF-ENTITY-EXT-MIB::hpnicfEntityExtTemperatureTooUp,,,,,,The trap indicates the temperature of a specified entity exceeded the shutdown threshold. In this condition, user should check the status and the environment of the entity, sometimes it goes wrong for some reason.
.1.3.6.1.4.1.11.2.14.11.15.2.6.2.0.22,HPN-ICF-ENTITY-EXT-MIB::hpnicfEntityExtTemperatureNormal,,,,,,The trap indicates the temperature of a specified entity recover from abnormal status.
.1.3.6.1.4.1.11.2.14.11.15.2.6.2.0.23,HPN-ICF-ENTITY-EXT-MIB::hpnicfEntityExternalAlarmOccur,,,,,,The trap is generated when the monitored device connected to the specified entity fails.
.1.3.6.1.4.1.11.2.14.11.15.2.6.2.0.24,HPN-ICF-ENTITY-EXT-MIB::hpnicfEntityExternalAlarmRecover,,,,,,The trap is generated when the failed device connected to the specified entity returns to normal.
.1.3.6.1.4.1.11.2.14.11.15.2.6.2.0.25,HPN-ICF-ENTITY-EXT-MIB::hpnicfEntityExtCpuUsageThresholdRecover,,,,,,The trap indicates the CPU usage descends the threshold.
.1.3.6.1.4.1.11.2.14.11.15.2.6.2.0.26,HPN-ICF-ENTITY-EXT-MIB::hpnicfEntityExtMemUsageThresholdRecover,,,,,,The trap indicates the memory usage descends the threshold.
.1.3.6.1.4.1.11.2.14.11.15.2.6.2.0.27,HPN-ICF-ENTITY-EXT-MIB::hpnicfEntityExtMemAllocatedFailed,,,,,,The trap indicates the memory allocated failed.
.1.3.6.1.4.1.11.2.14.11.15.2.6.2.0.28,HPN-ICF-ENTITY-EXT-MIB::hpnicfEntityExtECCParityAlarm,,,,,,The trap indicates the ECC(Error Correction Code) parity error alarm.
.1.3.6.1.4.1.11.2.14.11.15.2.6.2.0.29,HPN-ICF-ENTITY-EXT-MIB::hpnicfEntityExtCritLowerTempThresholdNotification,,,,,,The hpnicfEntityExtCritLowerTempThresholdNotification indicates the temperature is lower than the threshold. If the temperature is lower too much than the entity needs, the entity will halt.
.1.3.6.1.4.1.11.2.14.11.15.2.6.2.0.30,HPN-ICF-ENTITY-EXT-MIB::hpnicfEntityExtTemperatureTooLow,,,,,,The hpnicfEntityExtTemperatureTooLow indicates the temperature is lower than the threshold. If the temperature is lower too much than the entity needs, the entity halts now.
.1.3.6.1.4.1.11.2.14.11.15.2.6.2.0.31,HPN-ICF-ENTITY-EXT-MIB::hpnicfEntityExtFanDirectionNotPreferred,,,,,,This trap indicates the specified fan's direction does not accord with preferred. The two parameters indicate the entity index and physical name of fan.
.1.3.6.1.4.1.11.2.14.11.15.2.6.2.0.32,HPN-ICF-ENTITY-EXT-MIB::hpnicfEntityExtFanDirectionNotAccord,,,,,,This trap indicates the direction of fans does not accord with each other. The two parameters indicate the parent entity of the fans.
.1.3.6.1.4.1.11.2.14.11.15.2.6.2.0.33,HPN-ICF-ENTITY-EXT-MIB::hpnicfEntityExtSFPInvalid,,,,,,The transceiver module is not compatible with the interface card. The authorized manufacturer therefore shall NOT guarantee the normal function of the transceiver. The transceiver module will be invalidated in days. Please replace it with a compatible one as soon as possible. The trap is generated periodically after a phony transceiver module has been found.
.1.3.6.1.4.1.11.2.14.11.15.2.6.2.0.34,HPN-ICF-ENTITY-EXT-MIB::hpnicfEntityExtSFPInvalidNow,,,,,,This transceiver module is not compatible with the interface card. The authorized manufacturer therefore shall NOT guarantee the normal function of the transceiver. The trap is generated after a phony transceiver module has been found.
.1.3.6.1.4.1.11.2.14.11.15.2.6.2.0.35,HPN-ICF-ENTITY-EXT-MIB::hpnicfEntityExtMemUsageThresholdOverTrap,,,,,,This trap indicates that the memory usage of the entity is overloaded. This trap is used to replace hpnicfEntityExtMemUsageThresholdNotification.
.1.3.6.1.4.1.11.2.14.11.15.2.6.2.0.36,HPN-ICF-ENTITY-EXT-MIB::hpnicfEntityExtMemUsageThresholdRecoverTrap,,,,,,This trap indicates that the memory usage decreased below the threshold. This trap is used to replace hpnicfEntityExtMemUsageThresholdRecover.
.1.3.6.1.4.1.11.2.14.11.15.2.6.2.1,HPN-ICF-ENTITY-EXT-MIB::hpnicfEntityExtTrapsInfor,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.2.6.2.1.1,HPN-ICF-ENTITY-EXT-MIB::hpnicfEntityExtTrapDescription,OCTET,accessible-for-notify,,current,,The information of trap.
.1.3.6.1.4.1.11.2.14.11.15.2.6.2.1.2,HPN-ICF-ENTITY-EXT-MIB::hpnicfEntityExtECCParityAlarmStatus,INTEGER,accessible-for-notify,,current,other(1):l1cache(2):l2cache(3):sdram(4):mac(5):tcam(6):ingressbuffer(7):egressbuffer(8):lpm(9):controlmemory(10),ECC parity error.
.1.3.6.1.4.1.11.2.14.11.15.2.6.2.1.3,HPN-ICF-ENTITY-EXT-MIB::hpnicfEntityExtSFPInvalidInDays,Integer32,accessible-for-notify,,current,,The days when the transceiver module is still valid, but after those days, it will be invalidated.
.1.3.6.1.4.1.11.2.14.11.15.2.6.2.1.4,HPN-ICF-ENTITY-EXT-MIB::hpnicfEntityExtFirstTrapTime,TimeTicks,accessible-for-notify,,current,,Represents the first trap time.
.1.3.6.1.4.1.11.2.14.11.15.2.6.3,HPN-ICF-ENTITY-EXT-MIB::hpnicfEntityExtConformance,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.2.6.3.1,HPN-ICF-ENTITY-EXT-MIB::hpnicfEntityExtCompliances,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.2.6.3.1.1,HPN-ICF-ENTITY-EXT-MIB::hpnicfEntityExtCompliance,,,,,,The compliance statement for systems supporting this MIB.
.1.3.6.1.4.1.11.2.14.11.15.2.6.3.2,HPN-ICF-ENTITY-EXT-MIB::hpnicfEntityExtGroups,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.2.6.3.2.1,HPN-ICF-ENTITY-EXT-MIB::hpnicfEntityExtGroup,,,,,,Entity Extend group.
.1.3.6.1.4.1.11.2.14.11.15.2.6.3.2.2,HPN-ICF-ENTITY-EXT-MIB::hpnicfEntityExtNotificationGroup,,,,,,Entity Extend Notification group.
.1.3.6.1.4.1.11.2.14.11.15.2.6.3.2.3,HPN-ICF-ENTITY-EXT-MIB::hpnicfEntityExtManuGroup,,,,,,Standard Device Manufacture Information group.
.1.3.6.1.4.1.11.2.14.11.15.2.6.3.2.4,HPN-ICF-ENTITY-EXT-MIB::hpnicfEntityExtPowerGroup,,,,,,Standard Entity Power Information group.
.1.3.6.1.4.1.11.2.14.11.15.2.7,HPN-ICF-OID-MIB::hpnicfIPSecMonitor,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.2.7.1,HPN-ICF-IPSEC-MONITOR-MIB::hpnicfIPSecObjects,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.2.7.1.1,HPN-ICF-IPSEC-MONITOR-MIB::hpnicfIPSecTunnelTable,,not-accessible,,current,,The IPSec Phase-2 Tunnel Table. There is one entry in this table for each active IPSec Phase-2 Tunnel.
.1.3.6.1.4.1.11.2.14.11.15.2.7.1.1.1,HPN-ICF-IPSEC-MONITOR-MIB::hpnicfIPSecTunnelEntry,,not-accessible,hpnicfIPSecTunIfIndex:hpnicfIPSecTunEntryIndex:hpnicfIPSecTunIndex,current,,Information about hpnicfIPSecTunnelTable.
.1.3.6.1.4.1.11.2.14.11.15.2.7.1.1.1.1,HPN-ICF-IPSEC-MONITOR-MIB::hpnicfIPSecTunIfIndex,Integer32,not-accessible,,current,,The interface index( the ifIndex of ifTable ).
.1.3.6.1.4.1.11.2.14.11.15.2.7.1.1.1.2,HPN-ICF-IPSEC-MONITOR-MIB::hpnicfIPSecTunEntryIndex,Integer32,not-accessible,,current,,The index of IPSec policy applied in the interface.
.1.3.6.1.4.1.11.2.14.11.15.2.7.1.1.1.3,HPN-ICF-IPSEC-MONITOR-MIB::hpnicfIPSecTunIndex,Integer32,not-accessible,,current,,The index of IPSec Phase-2 Tunnel Table. The value of the index is a number which begins at one and is incremented with each tunnel that is created. The value of this object will wrap at 2,147,483,647.
.1.3.6.1.4.1.11.2.14.11.15.2.7.1.1.1.4,HPN-ICF-IPSEC-MONITOR-MIB::hpnicfIPSecTunIKETunnelIndex,Integer32,read-only,,current,,The index of the associated IPSec Phase-1 IKE Tunnel (IKETunIndex in the IKETunnelTable). 2147483647 is defined as invalid value. 
.1.3.6.1.4.1.11.2.14.11.15.2.7.1.1.1.5,HPN-ICF-IPSEC-MONITOR-MIB::hpnicfIPSecTunLocalAddr,IpAddress,read-only,,current,,The IP address of the local peer for the IPSec Phase-2 Tunnel. 0.0.0.0 is defined as invalid value.
.1.3.6.1.4.1.11.2.14.11.15.2.7.1.1.1.6,HPN-ICF-IPSEC-MONITOR-MIB::hpnicfIPSecTunRemoteAddr,IpAddress,read-only,,current,,The IP address of the remote peer for the IPSec Phase-2 Tunnel. 0.0.0.0 is defined as invalid value.
.1.3.6.1.4.1.11.2.14.11.15.2.7.1.1.1.7,HPN-ICF-IPSEC-MONITOR-MIB::hpnicfIPSecTunKeyType,INTEGER,read-only,,current,ike(1):manual(2):invalidType(2147483647),The key negotiate mode used by the IPSec Phase-2 Tunnel.
.1.3.6.1.4.1.11.2.14.11.15.2.7.1.1.1.8,HPN-ICF-IPSEC-MONITOR-MIB::hpnicfIPSecTunEncapMode,INTEGER,read-only,,current,tunnel(1):transport(2):invalidMode(2147483647),The encapsulation mode used by the IPSec Phase-2 Tunnel.
.1.3.6.1.4.1.11.2.14.11.15.2.7.1.1.1.9,HPN-ICF-IPSEC-MONITOR-MIB::hpnicfIPSecTunInitiator,INTEGER,read-only,,current,local(1):remote(2):none(2147483647),The initiator of this IPSec tunnel. Value none is used for manual IPsec tunnel, for there is no initiator or responder in this method.
.1.3.6.1.4.1.11.2.14.11.15.2.7.1.1.1.10,HPN-ICF-IPSEC-MONITOR-MIB::hpnicfIPSecTunLifeSize,Gauge32,read-only,,current,,The negotiated LifeSize of the IPSec Phase-2 Tunnel in kilobytes. 0 is defined as invalid value.
.1.3.6.1.4.1.11.2.14.11.15.2.7.1.1.1.11,HPN-ICF-IPSEC-MONITOR-MIB::hpnicfIPSecTunLifeTime,Integer32,read-only,,current,,The negotiated LifeTime of the IPSec Phase-2 Tunnel in seconds. 2147483647 is defined as invalid value.
.1.3.6.1.4.1.11.2.14.11.15.2.7.1.1.1.12,HPN-ICF-IPSEC-MONITOR-MIB::hpnicfIPSecTunRemainTime,Integer32,read-only,,current,,The remain time of SA in seconds. 2147483647 is defined as invalid value.
.1.3.6.1.4.1.11.2.14.11.15.2.7.1.1.1.13,HPN-ICF-IPSEC-MONITOR-MIB::hpnicfIPSecTunActiveTime,Integer32,read-only,,current,,The duration the IPSec Phase-2 Tunnel has been active in hundredths of seconds. 2147483647 is defined as invalid value.
.1.3.6.1.4.1.11.2.14.11.15.2.7.1.1.1.14,HPN-ICF-IPSEC-MONITOR-MIB::hpnicfIPSecTunRemainSize,Gauge32,read-only,,current,,The remain LifeSize of SA in kilobytes. 0 is defined as invalid value.
.1.3.6.1.4.1.11.2.14.11.15.2.7.1.1.1.15,HPN-ICF-IPSEC-MONITOR-MIB::hpnicfIPSecTunTotalRefreshes,Counter32,read-only,,current,,The total number of security association refreshing performed.
.1.3.6.1.4.1.11.2.14.11.15.2.7.1.1.1.16,HPN-ICF-IPSEC-MONITOR-MIB::hpnicfIPSecTunCurrentSaInstances,Gauge32,read-only,,current,,The number of security associations which are currently active or expiring.
.1.3.6.1.4.1.11.2.14.11.15.2.7.1.1.1.17,HPN-ICF-IPSEC-MONITOR-MIB::hpnicfIPSecTunInSaEncryptAlgo,INTEGER,read-only,,current,none(0):desCbc(1):ideaCbc(2):blowfishCbc(3):rc5R16B64Cbc(4):tripledesCbc(5):castCbc(6):aesCbc(7):nsaCbc(8):aesCbc128(9):aesCbc192(10):aesCbc256(11):invalidAlg(2147483647),The encryption algorithm used by the inbound security association of the IPSec Phase-2 Tunnel.
.1.3.6.1.4.1.11.2.14.11.15.2.7.1.1.1.18,HPN-ICF-IPSEC-MONITOR-MIB::hpnicfIPSecTunInSaAhAuthAlgo,INTEGER,read-only,,current,none(0):md5(1):sha(2):invalidAlg(2147483647),The authentication algorithm used by the inbound authentication header (AH) security association of the IPSec Phase-2 Tunnel.
.1.3.6.1.4.1.11.2.14.11.15.2.7.1.1.1.19,HPN-ICF-IPSEC-MONITOR-MIB::hpnicfIPSecTunInSaEspAuthAlgo,INTEGER,read-only,,current,none(0):md5(1):sha(2):invalidAlg(2147483647),The authentication algorithm used by the inbound encapsulation security protocol(ESP) security association of the IPSec Phase-2 Tunnel.
.1.3.6.1.4.1.11.2.14.11.15.2.7.1.1.1.20,HPN-ICF-IPSEC-MONITOR-MIB::hpnicfIPSecTunDiffHellmanGrp,INTEGER,read-only,,current,none(0):modp768(1):modp1024(2):modp1536(5):modp2048(14):invalidGroup(2147483647),The Diffie Hellman Group used by the security association of the IPSec Phase-2 Tunnel.
.1.3.6.1.4.1.11.2.14.11.15.2.7.1.1.1.21,HPN-ICF-IPSEC-MONITOR-MIB::hpnicfIPSecTunOutSaEncryptAlgo,INTEGER,read-only,,current,none(0):desCbc(1):ideaCbc(2):blowfishCbc(3):rc5R16B64Cbc(4):tripledesCbc(5):castCbc(6):aesCbc(7):nsaCbc(8):aesCbc128(9):aesCbc192(10):aesCbc256(11):invalidAlg(2147483647),The encryption algorithm used by the outbound security association of the IPSec Phase-2 Tunnel.
.1.3.6.1.4.1.11.2.14.11.15.2.7.1.1.1.22,HPN-ICF-IPSEC-MONITOR-MIB::hpnicfIPSecTunOutSaAhAuthAlgo,INTEGER,read-only,,current,none(0):md5(1):sha(2):invalidAlg(2147483647),The authentication algorithm used by the outbound authentication header (AH) security association of the IPSec Phase-2 Tunnel.
.1.3.6.1.4.1.11.2.14.11.15.2.7.1.1.1.23,HPN-ICF-IPSEC-MONITOR-MIB::hpnicfIPSecTunOutSaEspAuthAlgo,INTEGER,read-only,,current,none(0):md5(1):sha(2):invalidAlg(2147483647),The authentication algorithm used by the outbound encapsulation security protocol(ESP) security association of the IPSec Phase-2 Tunnel.
.1.3.6.1.4.1.11.2.14.11.15.2.7.1.1.1.24,HPN-ICF-IPSEC-MONITOR-MIB::hpnicfIPSecTunPolicyName,OCTET,read-only,,current,,The policy name used by this IPSec tunnel.
.1.3.6.1.4.1.11.2.14.11.15.2.7.1.1.1.25,HPN-ICF-IPSEC-MONITOR-MIB::hpnicfIPSecTunPolicyNum,Integer32,read-only,,current,,The sequence number of policy used by this IPSec tunnel.
.1.3.6.1.4.1.11.2.14.11.15.2.7.1.1.1.26,HPN-ICF-IPSEC-MONITOR-MIB::hpnicfIPSecTunStatus,INTEGER,read-only,,current,initial(1):ready(2):rekeyed(3):closed(4),The status of the IPSec Tunnel.
.1.3.6.1.4.1.11.2.14.11.15.2.7.1.2,HPN-ICF-IPSEC-MONITOR-MIB::hpnicfIPSecTunnelStatTable,,not-accessible,,current,,The IPSec Phase-2 Tunnel Statistics Table. 
.1.3.6.1.4.1.11.2.14.11.15.2.7.1.2.1,HPN-ICF-IPSEC-MONITOR-MIB::hpnicfIPSecTunnelStatEntry,,not-accessible,hpnicfIPSecTunIfIndex:hpnicfIPSecTunEntryIndex:hpnicfIPSecTunIndex,current,,Information about hpnicfIPSecTunnelStatTable.
.1.3.6.1.4.1.11.2.14.11.15.2.7.1.2.1.1,HPN-ICF-IPSEC-MONITOR-MIB::hpnicfIPSecTunInOctets,Counter64,read-only,,current,,The total number of octets received by this IPSec Phase-2 Tunnel. This value is accumulated BEFORE determining whether or not the packet should be decompressed.
.1.3.6.1.4.1.11.2.14.11.15.2.7.1.2.1.2,HPN-ICF-IPSEC-MONITOR-MIB::hpnicfIPSecTunInDecompOctets,Counter64,read-only,,current,,The total number of decompressed octets received by this IPSec Phase-2 Tunnel. This value is accumulated AFTER the packet is decompressed.
.1.3.6.1.4.1.11.2.14.11.15.2.7.1.2.1.3,HPN-ICF-IPSEC-MONITOR-MIB::hpnicfIPSecTunInPkts,Counter64,read-only,,current,,The total number of packets received by this IPSec Phase-2 Tunnel.
.1.3.6.1.4.1.11.2.14.11.15.2.7.1.2.1.4,HPN-ICF-IPSEC-MONITOR-MIB::hpnicfIPSecTunInDropPkts,Counter64,read-only,,current,,The total number of packets dropped during receiving process by this IPSec Phase-2 Tunnel.
.1.3.6.1.4.1.11.2.14.11.15.2.7.1.2.1.5,HPN-ICF-IPSEC-MONITOR-MIB::hpnicfIPSecTunInReplayDropPkts,Counter32,read-only,,current,,The total number of packets dropped during receiving process due to Anti-Replay process by this IPSec Phase-2 Tunnel.
.1.3.6.1.4.1.11.2.14.11.15.2.7.1.2.1.6,HPN-ICF-IPSEC-MONITOR-MIB::hpnicfIPSecTunInAuthFails,Counter32,read-only,,current,,The total number of inbound authentication's which ended in failure by this IPSec Phase-2 Tunnel.
.1.3.6.1.4.1.11.2.14.11.15.2.7.1.2.1.7,HPN-ICF-IPSEC-MONITOR-MIB::hpnicfIPSecTunInDecryptFails,Counter32,read-only,,current,,The total number of inbound decryption's which ended in failure by this IPSec Phase-2 Tunnel.
.1.3.6.1.4.1.11.2.14.11.15.2.7.1.2.1.8,HPN-ICF-IPSEC-MONITOR-MIB::hpnicfIPSecTunOutOctets,Counter64,read-only,,current,,The total number of octets sent by this IPSec Phase-2 Tunnel. This value is accumulated AFTER determining whether or not the packet should be compressed.
.1.3.6.1.4.1.11.2.14.11.15.2.7.1.2.1.9,HPN-ICF-IPSEC-MONITOR-MIB::hpnicfIPSecTunOutUncompOctets,Counter64,read-only,,current,,The total number of uncompressed octets sent by this IPSec Phase-2 Tunnel.This value is accumulated BEFORE the packet is compressed.
.1.3.6.1.4.1.11.2.14.11.15.2.7.1.2.1.10,HPN-ICF-IPSEC-MONITOR-MIB::hpnicfIPSecTunOutPkts,Counter64,read-only,,current,,The total number of packets sent by this IPSec Phase-2 Tunnel.
.1.3.6.1.4.1.11.2.14.11.15.2.7.1.2.1.11,HPN-ICF-IPSEC-MONITOR-MIB::hpnicfIPSecTunOutDropPkts,Counter64,read-only,,current,,The total number of packets dropped during sending process by this IPSec Phase-2 Tunnel.
.1.3.6.1.4.1.11.2.14.11.15.2.7.1.2.1.12,HPN-ICF-IPSEC-MONITOR-MIB::hpnicfIPSecTunOutEncryptFails,Counter32,read-only,,current,,The total number of outbound encryption's which ended in failure by this IPSec Phase-2 Tunnel.
.1.3.6.1.4.1.11.2.14.11.15.2.7.1.2.1.13,HPN-ICF-IPSEC-MONITOR-MIB::hpnicfIPSecTunNoMemoryDropPkts,Counter32,read-only,,current,,The total number of packets dropped due to no enough memory by this IPSec Phase-2 Tunnel.
.1.3.6.1.4.1.11.2.14.11.15.2.7.1.2.1.14,HPN-ICF-IPSEC-MONITOR-MIB::hpnicfIPSecTunQueueFullDropPkts,Counter32,read-only,,current,,The total number of packets dropped due to queue full by this IPSec Phase-2 Tunnel.
.1.3.6.1.4.1.11.2.14.11.15.2.7.1.2.1.15,HPN-ICF-IPSEC-MONITOR-MIB::hpnicfIPSecTunInvalidLenDropPkts,Counter32,read-only,,current,,The total number of packets dropped due to invalid length packet by this IPSec Phase-2 Tunnel.
.1.3.6.1.4.1.11.2.14.11.15.2.7.1.2.1.16,HPN-ICF-IPSEC-MONITOR-MIB::hpnicfIPSecTunTooLongDropPkts,Counter32,read-only,,current,,The total number of packets dropped due to too long packet by this IPSec Phase-2 Tunnel.
.1.3.6.1.4.1.11.2.14.11.15.2.7.1.2.1.17,HPN-ICF-IPSEC-MONITOR-MIB::hpnicfIPSecTunInvalidSaDropPkts,Counter32,read-only,,current,,The total number of packets dropped due to invalid SA by this IPSec Phase-2 Tunnel.
.1.3.6.1.4.1.11.2.14.11.15.2.7.1.3,HPN-ICF-IPSEC-MONITOR-MIB::hpnicfIPSecSaTable,,not-accessible,,current,,The IPSec Phase-2 Security Protection Index Table. This table contains an entry for each active and expiring security association.
.1.3.6.1.4.1.11.2.14.11.15.2.7.1.3.1,HPN-ICF-IPSEC-MONITOR-MIB::hpnicfIPSecSaEntry,,not-accessible,hpnicfIPSecTunIfIndex:hpnicfIPSecTunEntryIndex:hpnicfIPSecTunIndex:hpnicfIPSecSaIndex,current,,Information about hpnicfIPSecSaTable.
.1.3.6.1.4.1.11.2.14.11.15.2.7.1.3.1.1,HPN-ICF-IPSEC-MONITOR-MIB::hpnicfIPSecSaIndex,Integer32,not-accessible,,current,,The number of the Sa associated with the Phase-2 Tunnel Table. The value of this index is a number which begins at one and is incremented with each Sa associated with an IPSec Phase-2 Tunnel. The value of this object will wrap at 2,147,483,647.
.1.3.6.1.4.1.11.2.14.11.15.2.7.1.3.1.2,HPN-ICF-IPSEC-MONITOR-MIB::hpnicfIPSecSaDirection,INTEGER,read-only,,current,in(1):out(2),The direction of the SA.
.1.3.6.1.4.1.11.2.14.11.15.2.7.1.3.1.3,HPN-ICF-IPSEC-MONITOR-MIB::hpnicfIPSecSaValue,Unsigned32,read-only,,current,,The value of the SPI.
.1.3.6.1.4.1.11.2.14.11.15.2.7.1.3.1.4,HPN-ICF-IPSEC-MONITOR-MIB::hpnicfIPSecSaProtocol,INTEGER,read-only,,current,reserved(0):isakmp(1):ah(2):esp(3):ipcomp(4),The security protocol of the SA.
.1.3.6.1.4.1.11.2.14.11.15.2.7.1.3.1.5,HPN-ICF-IPSEC-MONITOR-MIB::hpnicfIPSecSaEncryptAlgo,INTEGER,read-only,,current,none(0):desCbc(1):ideaCbc(2):blowfishCbc(3):rc5R16B64Cbc(4):tripledesCbc(5):castCbc(6):aesCbc(7):nsaCbc(8):aesCbc128(9):aesCbc192(10):aesCbc256(11):invalidAlg(2147483647),The encryption algorithm used by the security association of the IPSec Phase-2 Tunnel.
.1.3.6.1.4.1.11.2.14.11.15.2.7.1.3.1.6,HPN-ICF-IPSEC-MONITOR-MIB::hpnicfIPSecSaAuthAlgo,INTEGER,read-only,,current,none(0):md5(1):sha(2):invalidAlg(2147483647),The authentication algorithm used by the SA.
.1.3.6.1.4.1.11.2.14.11.15.2.7.1.3.1.7,HPN-ICF-IPSEC-MONITOR-MIB::hpnicfIPSecSaStatus,INTEGER,read-only,,current,active(1):expiring(2),The status of the SA.
.1.3.6.1.4.1.11.2.14.11.15.2.7.1.4,HPN-ICF-IPSEC-MONITOR-MIB::hpnicfIPSecTrafficTable,,not-accessible,,current,,The IPSec Phase-2 Tunnel Traffic Table. 
.1.3.6.1.4.1.11.2.14.11.15.2.7.1.4.1,HPN-ICF-IPSEC-MONITOR-MIB::hpnicfIPSecTrafficEntry,,not-accessible,hpnicfIPSecTunIfIndex:hpnicfIPSecTunEntryIndex:hpnicfIPSecTunIndex,current,,Information about hpnicfIPSecTrafficTable.
.1.3.6.1.4.1.11.2.14.11.15.2.7.1.4.1.1,HPN-ICF-IPSEC-MONITOR-MIB::hpnicfIPSecTrafficLocalType,INTEGER,read-only,,current,ipv4Addr(1):ipv4AddrSubnet(4):ipv6Addr(5):ipv6AddrSubnet(6):ipv4AddrRange(7):ipv6AddrRange(8),The type of local peer. Possible values are: a single IP address, or an IP address range, or an IP subnet.
.1.3.6.1.4.1.11.2.14.11.15.2.7.1.4.1.2,HPN-ICF-IPSEC-MONITOR-MIB::hpnicfIPSecTrafficLocalAddr1,IpAddress,read-only,,current,,The first specification of local peer's IP address. If the local peer type is single IP address, then this is the value of the IP address. If the local peer type is IP subnet, then this is the value of the subnet. If the local peer type is IP address range, then this is the value of beginning IP address of the range.
.1.3.6.1.4.1.11.2.14.11.15.2.7.1.4.1.3,HPN-ICF-IPSEC-MONITOR-MIB::hpnicfIPSecTrafficLocalAddr2,IpAddress,read-only,,current,,The second specification of local peer's IP address. If the local peer type is single IP address, then this is the value of the IP address. If the local peer type is IP subnet, then this is the value of the subnet mask. If the local peer type is IP address range, then this is the value of ending IP address of the range.
.1.3.6.1.4.1.11.2.14.11.15.2.7.1.4.1.4,HPN-ICF-IPSEC-MONITOR-MIB::hpnicfIPSecTrafficLocalProtocol,Integer32,read-only,,current,,The protocol number of the local peer's traffic.
.1.3.6.1.4.1.11.2.14.11.15.2.7.1.4.1.5,HPN-ICF-IPSEC-MONITOR-MIB::hpnicfIPSecTrafficLocalPort,Integer32,read-only,,current,,The port number of the local peer's traffic.
.1.3.6.1.4.1.11.2.14.11.15.2.7.1.4.1.6,HPN-ICF-IPSEC-MONITOR-MIB::hpnicfIPSecTrafficRemoteType,INTEGER,read-only,,current,ipv4Addr(1):ipv4AddrSubnet(4):ipv6Addr(5):ipv6AddrSubnet(6):ipv4AddrRange(7):ipv6AddrRange(8),The type of remote peer. Possible values are: a single IP address, or an IP address range, or an IP subnet.
.1.3.6.1.4.1.11.2.14.11.15.2.7.1.4.1.7,HPN-ICF-IPSEC-MONITOR-MIB::hpnicfIPSecTrafficRemoteAddr1,IpAddress,read-only,,current,,The first specification of remote peer's IP address. If the remote peer type is single IP address, then this is the value of the IP address. If the remote peer type is IP subnet, then this is the value of the subnet. If the remote peer type is IP address range, then this is the value of beginning IP address of the range.
.1.3.6.1.4.1.11.2.14.11.15.2.7.1.4.1.8,HPN-ICF-IPSEC-MONITOR-MIB::hpnicfIPSecTrafficRemoteAddr2,IpAddress,read-only,,current,,Single IP address, then this is the value of the IP address. If the remote peer type is IP subnet, then this is the value of the subnet mask. If the remote peer type is IP address range, then this is the value of ending IP address of the range.
.1.3.6.1.4.1.11.2.14.11.15.2.7.1.4.1.9,HPN-ICF-IPSEC-MONITOR-MIB::hpnicfIPSecTrafficRemoteProtocol,Integer32,read-only,,current,,The protocol number of the remote peer's traffic.
.1.3.6.1.4.1.11.2.14.11.15.2.7.1.4.1.10,HPN-ICF-IPSEC-MONITOR-MIB::hpnicfIPSecTrafficRemotePort,Integer32,read-only,,current,,The port number of the remote peer's traffic.
.1.3.6.1.4.1.11.2.14.11.15.2.7.1.5,HPN-ICF-IPSEC-MONITOR-MIB::hpnicfIPSecGlobalStats,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.2.7.1.5.1,HPN-ICF-IPSEC-MONITOR-MIB::hpnicfIPSecGlobalActiveTunnels,Gauge32,read-only,,current,,The total number of currently active IPSec Phase-2 Tunnels.
.1.3.6.1.4.1.11.2.14.11.15.2.7.1.5.2,HPN-ICF-IPSEC-MONITOR-MIB::hpnicfIPSecGlobalActiveSas,Gauge32,read-only,,current,,The total number of currently active or expiring IPSec Phase-2 SA.
.1.3.6.1.4.1.11.2.14.11.15.2.7.1.5.3,HPN-ICF-IPSEC-MONITOR-MIB::hpnicfIPSecGlobalInOctets,Counter64,read-only,,current,,The total number of octets received by all current and previous IPSec Phase-2 Tunnels. This value is accumulated BEFORE determining whether or not the packet should be decompressed.
.1.3.6.1.4.1.11.2.14.11.15.2.7.1.5.4,HPN-ICF-IPSEC-MONITOR-MIB::hpnicfIPSecGlobalInDecompOctets,Counter64,read-only,,current,,The total number of decompressed octets received by all current and previous IPSec Phase-2 Tunnels. This value is accumulated AFTER the packet is decompressed.
.1.3.6.1.4.1.11.2.14.11.15.2.7.1.5.5,HPN-ICF-IPSEC-MONITOR-MIB::hpnicfIPSecGlobalInPkts,Counter64,read-only,,current,,The total number of packets received by all current and previous IPSec Phase-2 Tunnels.
.1.3.6.1.4.1.11.2.14.11.15.2.7.1.5.6,HPN-ICF-IPSEC-MONITOR-MIB::hpnicfIPSecGlobalInDrops,Counter64,read-only,,current,,The total number of packets dropped during receiving process by all current and previous IPSec Phase-2 Tunnels. 
.1.3.6.1.4.1.11.2.14.11.15.2.7.1.5.7,HPN-ICF-IPSEC-MONITOR-MIB::hpnicfIPSecGlobalInReplayDrops,Counter32,read-only,,current,,The total number of packets dropped during receiving process due to Anti-Replay process by all current and previous IPSec Phase-2 Tunnels.
.1.3.6.1.4.1.11.2.14.11.15.2.7.1.5.8,HPN-ICF-IPSEC-MONITOR-MIB::hpnicfIPSecGlobalInAuthFails,Counter32,read-only,,current,,The total number of inbound authentication's which ended in failure by all current and previous IPSec Phase-2 Tunnels.
.1.3.6.1.4.1.11.2.14.11.15.2.7.1.5.9,HPN-ICF-IPSEC-MONITOR-MIB::hpnicfIPSecGlobalInDecryptFails,Counter32,read-only,,current,,The total number of inbound decryption's which ended in failure by all current and previous IPSec Phase-2 Tunnels.
.1.3.6.1.4.1.11.2.14.11.15.2.7.1.5.10,HPN-ICF-IPSEC-MONITOR-MIB::hpnicfIPSecGlobalOutOctets,Counter64,read-only,,current,,The total number of octets sent by all current and previous IPSec Phase-2 Tunnels. This value is accumulated AFTER determining whether or not the packet should be compressed.
.1.3.6.1.4.1.11.2.14.11.15.2.7.1.5.11,HPN-ICF-IPSEC-MONITOR-MIB::hpnicfIPSecGlobalOutUncompOctets,Counter64,read-only,,current,,The total number of uncompressed octets sent by all current and previous IPSec Phase-2 Tunnels. This value is accumulated BEFORE the packet is compressed.
.1.3.6.1.4.1.11.2.14.11.15.2.7.1.5.12,HPN-ICF-IPSEC-MONITOR-MIB::hpnicfIPSecGlobalOutPkts,Counter64,read-only,,current,,The total number of packets sent by all current and previous IPSec Phase-2 Tunnels.
.1.3.6.1.4.1.11.2.14.11.15.2.7.1.5.13,HPN-ICF-IPSEC-MONITOR-MIB::hpnicfIPSecGlobalOutDrops,Counter64,read-only,,current,,The total number of packets dropped during sending process by all current and previous IPSec Phase-2 Tunnels.
.1.3.6.1.4.1.11.2.14.11.15.2.7.1.5.14,HPN-ICF-IPSEC-MONITOR-MIB::hpnicfIPSecGlobalOutEncryptFails,Counter32,read-only,,current,,The total number of outbound encryption's which ended in failure by all current and previous IPSec Phase-2 Tunnels.
.1.3.6.1.4.1.11.2.14.11.15.2.7.1.5.15,HPN-ICF-IPSEC-MONITOR-MIB::hpnicfIPSecGlobalNoMemoryDropPkts,Counter32,read-only,,current,,The total number of packets dropped due to no enough memory by all current and previous IPSec Phase-2 Tunnels.
.1.3.6.1.4.1.11.2.14.11.15.2.7.1.5.16,HPN-ICF-IPSEC-MONITOR-MIB::hpnicfIPSecGlobalNoFindSaDropPkts,Counter32,read-only,,current,,The total number of packets dropped due to not find SA by all current and previous IPSec Phase-2 Tunnels.
.1.3.6.1.4.1.11.2.14.11.15.2.7.1.5.17,HPN-ICF-IPSEC-MONITOR-MIB::hpnicfIPSecGlobalQueueFullDropPkts,Counter32,read-only,,current,,The total number of packets dropped due to queue full by all current and previous IPSec Phase-2 Tunnels.
.1.3.6.1.4.1.11.2.14.11.15.2.7.1.5.18,HPN-ICF-IPSEC-MONITOR-MIB::hpnicfIPSecGlobalInvalidLenDropPkts,Counter32,read-only,,current,,The total number of packets dropped due to invalid packet length by all current and previous IPSec Phase-2 Tunnels.
.1.3.6.1.4.1.11.2.14.11.15.2.7.1.5.19,HPN-ICF-IPSEC-MONITOR-MIB::hpnicfIPSecGlobalTooLongDropPkts,Counter32,read-only,,current,,The total number of packets dropped due to too long packet by all current and previous IPSec Phase-2 Tunnels.
.1.3.6.1.4.1.11.2.14.11.15.2.7.1.5.20,HPN-ICF-IPSEC-MONITOR-MIB::hpnicfIPSecGlobalInvalidSaDropPkts,Counter32,read-only,,current,,The total number of packets dropped due to invalid SA by all current and previous IPSec Phase-2 Tunnels.
.1.3.6.1.4.1.11.2.14.11.15.2.7.1.6,HPN-ICF-IPSEC-MONITOR-MIB::hpnicfIPSecTrapObject,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.2.7.1.6.1,HPN-ICF-IPSEC-MONITOR-MIB::hpnicfIPSecPolicyName,OCTET,accessible-for-notify,,current,,The IPSec policy name with a trap.
.1.3.6.1.4.1.11.2.14.11.15.2.7.1.6.2,HPN-ICF-IPSEC-MONITOR-MIB::hpnicfIPSecPolicySeqNum,Integer32,accessible-for-notify,,current,,The IPSec policy sequence number with a trap.
.1.3.6.1.4.1.11.2.14.11.15.2.7.1.6.3,HPN-ICF-IPSEC-MONITOR-MIB::hpnicfIPSecPolicySize,Integer32,accessible-for-notify,,current,,The number of IPSec policies with a trap.
.1.3.6.1.4.1.11.2.14.11.15.2.7.1.6.4,HPN-ICF-IPSEC-MONITOR-MIB::hpnicfIPSecSpiValue,Integer32,accessible-for-notify,,current,,The SPI value associated with a trap.
.1.3.6.1.4.1.11.2.14.11.15.2.7.1.7,HPN-ICF-IPSEC-MONITOR-MIB::hpnicfIPSecTrapCntl,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.2.7.1.7.1,HPN-ICF-IPSEC-MONITOR-MIB::hpnicfIPSecTrapGlobalCntl,INTEGER,read-write,,current,enabled(1):disabled(2),Indicates whether all IPSec traps should be generated.
.1.3.6.1.4.1.11.2.14.11.15.2.7.1.7.2,HPN-ICF-IPSEC-MONITOR-MIB::hpnicfIPSecTunnelStartTrapCntl,INTEGER,read-write,,current,enabled(1):disabled(2),Indicates whether hpnicfIPSecTunnelStart traps should be generated.
.1.3.6.1.4.1.11.2.14.11.15.2.7.1.7.3,HPN-ICF-IPSEC-MONITOR-MIB::hpnicfIPSecTunnelStopTrapCntl,INTEGER,read-write,,current,enabled(1):disabled(2),Indicates whether hpnicfIPSecTunnelStop traps should be generated.
.1.3.6.1.4.1.11.2.14.11.15.2.7.1.7.4,HPN-ICF-IPSEC-MONITOR-MIB::hpnicfIPSecNoSaTrapCntl,INTEGER,read-write,,current,enabled(1):disabled(2),Indicates whether hpnicfIPSecNoSaFailure traps should be generated.
.1.3.6.1.4.1.11.2.14.11.15.2.7.1.7.5,HPN-ICF-IPSEC-MONITOR-MIB::hpnicfIPSecAuthFailureTrapCntl,INTEGER,read-write,,current,enabled(1):disabled(2),Indicates whether hpnicfIPSecAuthFailFailure traps should be generated.
.1.3.6.1.4.1.11.2.14.11.15.2.7.1.7.6,HPN-ICF-IPSEC-MONITOR-MIB::hpnicfIPSecEncryFailureTrapCntl,INTEGER,read-write,,current,enabled(1):disabled(2),Indicates whether hpnicfIPSecEncryFailFailure traps should be generated.
.1.3.6.1.4.1.11.2.14.11.15.2.7.1.7.7,HPN-ICF-IPSEC-MONITOR-MIB::hpnicfIPSecDecryFailureTrapCntl,INTEGER,read-write,,current,enabled(1):disabled(2),Indicates whether hpnicfIPSecDecryFailFailure traps should be generated.
.1.3.6.1.4.1.11.2.14.11.15.2.7.1.7.8,HPN-ICF-IPSEC-MONITOR-MIB::hpnicfIPSecInvalidSaTrapCntl,INTEGER,read-write,,current,enabled(1):disabled(2),Indicates whether hpnicfIPSec Invalid Sa Failure traps should be generated.
.1.3.6.1.4.1.11.2.14.11.15.2.7.1.7.9,HPN-ICF-IPSEC-MONITOR-MIB::hpnicfIPSecPolicyAddTrapCntl,INTEGER,read-write,,current,enabled(1):disabled(2),Indicates whether hpnicfIPSecPolicyAdd traps should be generated.
.1.3.6.1.4.1.11.2.14.11.15.2.7.1.7.10,HPN-ICF-IPSEC-MONITOR-MIB::hpnicfIPSecPolicyDelTrapCntl,INTEGER,read-write,,current,enabled(1):disabled(2),Indicates whether hpnicfIPSecPolicyDel traps should be generated.
.1.3.6.1.4.1.11.2.14.11.15.2.7.1.7.11,HPN-ICF-IPSEC-MONITOR-MIB::hpnicfIPSecPolicyAttachTrapCntl,INTEGER,read-write,,current,enabled(1):disabled(2),Indicates whether hpnicfIPSecPolicyAttach traps should be generated.
.1.3.6.1.4.1.11.2.14.11.15.2.7.1.7.12,HPN-ICF-IPSEC-MONITOR-MIB::hpnicfIPSecPolicyDetachTrapCntl,INTEGER,read-write,,current,enabled(1):disabled(2),Indicates whether hpnicfIPSecPolicyDetach traps should be generated.
.1.3.6.1.4.1.11.2.14.11.15.2.7.1.8,HPN-ICF-IPSEC-MONITOR-MIB::hpnicfIPSecTrap,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.2.7.1.8.1,HPN-ICF-IPSEC-MONITOR-MIB::hpnicfIPSecNotifications,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.2.7.1.8.1.1,HPN-ICF-IPSEC-MONITOR-MIB::hpnicfIPSecTunnelStart,,,,,,This notification is generated when an IPSec Phase-2 Tunnel is created.
.1.3.6.1.4.1.11.2.14.11.15.2.7.1.8.1.2,HPN-ICF-IPSEC-MONITOR-MIB::hpnicfIPSecTunnelStop,,,,,,This notification is generated when an IPSec Phase-2 Tunnel is deleted.
.1.3.6.1.4.1.11.2.14.11.15.2.7.1.8.1.3,HPN-ICF-IPSEC-MONITOR-MIB::hpnicfIPSecNoSaFailure,,,,,,This notification is generated when an IPSec Phase-2 non-existent SA error occurs.
.1.3.6.1.4.1.11.2.14.11.15.2.7.1.8.1.4,HPN-ICF-IPSEC-MONITOR-MIB::hpnicfIPSecAuthFailFailure,,,,,,This notification is generated when the IPSec phase-2 authentication failure occurs.
.1.3.6.1.4.1.11.2.14.11.15.2.7.1.8.1.5,HPN-ICF-IPSEC-MONITOR-MIB::hpnicfIPSecEncryFailFailure,,,,,,This notification is generated when the IPSec phase-2 tunnel has an encrypting failure.
.1.3.6.1.4.1.11.2.14.11.15.2.7.1.8.1.6,HPN-ICF-IPSEC-MONITOR-MIB::hpnicfIPSecDecryFailFailure,,,,,,This notification is generated when the IPSec phase-2 tunnel has a decrypting failure.
.1.3.6.1.4.1.11.2.14.11.15.2.7.1.8.1.7,HPN-ICF-IPSEC-MONITOR-MIB::hpnicfIPSecInvalidSaFailure,,,,,,This notification is generated when the IPSec phase-2 invalid SA failure occurs.
.1.3.6.1.4.1.11.2.14.11.15.2.7.1.8.1.8,HPN-ICF-IPSEC-MONITOR-MIB::hpnicfIPSecPolicyAdd,,,,,,This notification is generated when an IPSec policy is added.
.1.3.6.1.4.1.11.2.14.11.15.2.7.1.8.1.9,HPN-ICF-IPSEC-MONITOR-MIB::hpnicfIPSecPolicyDel,,,,,,This notification is generated when an IPSec policy is deleted.
.1.3.6.1.4.1.11.2.14.11.15.2.7.1.8.1.10,HPN-ICF-IPSEC-MONITOR-MIB::hpnicfIPSecPolicyAttach,,,,,,This notification is generated when an IPSec policy is attached with one interface.
.1.3.6.1.4.1.11.2.14.11.15.2.7.1.8.1.11,HPN-ICF-IPSEC-MONITOR-MIB::hpnicfIPSecPolicyDetach,,,,,,This notification is generated when an IPSec policy is detached with one interface.
.1.3.6.1.4.1.11.2.14.11.15.2.7.2,HPN-ICF-IPSEC-MONITOR-MIB::hpnicfIPSecConformance,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.2.7.2.1,HPN-ICF-IPSEC-MONITOR-MIB::hpnicfIPSecCompliances,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.2.7.2.1.1,HPN-ICF-IPSEC-MONITOR-MIB::hpnicfIPSecCompliance,,,,,, 
.1.3.6.1.4.1.11.2.14.11.15.2.7.2.2,HPN-ICF-IPSEC-MONITOR-MIB::hpnicfIPSecGroups,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.2.7.2.2.1,HPN-ICF-IPSEC-MONITOR-MIB::hpnicfIPSecTunnelTableGroup,,,,,,The group contains the IPSec tunnel's property information.
.1.3.6.1.4.1.11.2.14.11.15.2.7.2.2.2,HPN-ICF-IPSEC-MONITOR-MIB::hpnicfIPSecTunnelStatGroup,,,,,,The group contains the IPSec tunnel's statistic information.
.1.3.6.1.4.1.11.2.14.11.15.2.7.2.2.3,HPN-ICF-IPSEC-MONITOR-MIB::hpnicfIPSecSaGroup,,,,,,The group contains the SA's property information.
.1.3.6.1.4.1.11.2.14.11.15.2.7.2.2.4,HPN-ICF-IPSEC-MONITOR-MIB::hpnicfIPSecTrafficTableGroup,,,,,,The group contains the property information of the data flow protected by IPSec tunnel.
.1.3.6.1.4.1.11.2.14.11.15.2.7.2.2.5,HPN-ICF-IPSEC-MONITOR-MIB::hpnicfIPSecGlobalStatsGroup,,,,,,The group contains all of the IPSec tunnel's statistic information.
.1.3.6.1.4.1.11.2.14.11.15.2.7.2.2.6,HPN-ICF-IPSEC-MONITOR-MIB::hpnicfIPSecTrapObjectGroup,,,,,,The group contains all of trap objects of IPSec tunnels.
.1.3.6.1.4.1.11.2.14.11.15.2.7.2.2.7,HPN-ICF-IPSEC-MONITOR-MIB::hpnicfIPSecTrapCntlGroup,,,,,,The group contains all of trap switches of IPSec tunnels.
.1.3.6.1.4.1.11.2.14.11.15.2.7.2.2.8,HPN-ICF-IPSEC-MONITOR-MIB::hpnicfIPSecTrapGroup,,,,,,The group contains all of trap of IPSec tunnels.
.1.3.6.1.4.1.11.2.14.11.15.2.8,HPN-ICF-OID-MIB::hpnicfAcl,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.2.8.1,HPN-ICF-ACL-MIB::hpnicfAclMibObjects,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.2.8.1.1,HPN-ICF-ACL-MIB::hpnicfAclMode,INTEGER,read-write,,current,linkBased(1):ipBased(2),Access-list mode.
.1.3.6.1.4.1.11.2.14.11.15.2.8.1.2,HPN-ICF-ACL-MIB::hpnicfAclNumGroupTable,,not-accessible,,current,,Configure the match-order of number-acl group.
.1.3.6.1.4.1.11.2.14.11.15.2.8.1.2.1,HPN-ICF-ACL-MIB::hpnicfAclNumGroupEntry,,not-accessible,hpnicfAclNumGroupAclNum,current,,Define the index of hpnicfAclNumGroupTable.
.1.3.6.1.4.1.11.2.14.11.15.2.8.1.2.1.1,HPN-ICF-ACL-MIB::hpnicfAclNumGroupAclNum,Integer32,not-accessible,,current,,The index of number-acl group Interface type:1000..1999 Basic type:2000..2999 Advance type:3000..3999 Link type:4000..4999 User type:5000..5999
.1.3.6.1.4.1.11.2.14.11.15.2.8.1.2.1.2,HPN-ICF-ACL-MIB::hpnicfAclNumGroupMatchOrder,INTEGER,read-create,,current,config(1):auto(2),The match-order of number-acl group.
.1.3.6.1.4.1.11.2.14.11.15.2.8.1.2.1.3,HPN-ICF-ACL-MIB::hpnicfAclNumGroupSubitemNum,Integer32,read-only,,current,,The number of number-acl group's node.
.1.3.6.1.4.1.11.2.14.11.15.2.8.1.2.1.4,HPN-ICF-ACL-MIB::hpnicfAclNumGroupDescription,OCTET,read-write,,current,,The description of this acl group.
.1.3.6.1.4.1.11.2.14.11.15.2.8.1.2.1.5,HPN-ICF-ACL-MIB::hpnicfAclNumGroupCountClear,INTEGER,read-create,,current,cleared(1):nouse(2),Reset the value of rules' counter, which belong to this group.
.1.3.6.1.4.1.11.2.14.11.15.2.8.1.2.1.6,HPN-ICF-ACL-MIB::hpnicfAclNumGroupRowStatus,INTEGER,read-create,,current,active(1):notInService(2):notReady(3):createAndGo(4):createAndWait(5):destroy(6),RowStatus, now support three state: CreateAndGo, Active, Destroy.
.1.3.6.1.4.1.11.2.14.11.15.2.8.1.3,HPN-ICF-ACL-MIB::hpnicfAclNameGroupTable,,not-accessible,,current,,Create acl-group that identified by name.
.1.3.6.1.4.1.11.2.14.11.15.2.8.1.3.1,HPN-ICF-ACL-MIB::hpnicfAclNameGroupEntry,,not-accessible,hpnicfAclNameGroupIndex,current,,Define the index of hpnicfAclNameGroupTable.
.1.3.6.1.4.1.11.2.14.11.15.2.8.1.3.1.1,HPN-ICF-ACL-MIB::hpnicfAclNameGroupIndex,Integer32,not-accessible,,current,,The index of name-acl group.
.1.3.6.1.4.1.11.2.14.11.15.2.8.1.3.1.2,HPN-ICF-ACL-MIB::hpnicfAclNameGroupCreateName,OCTET,read-create,,current,,The name of name-acl group.
.1.3.6.1.4.1.11.2.14.11.15.2.8.1.3.1.3,HPN-ICF-ACL-MIB::hpnicfAclNameGroupTypes,INTEGER,read-create,,current,basic(1):advanced(2):ifBased(3):link(4):user(5),The type of name-acl group.
.1.3.6.1.4.1.11.2.14.11.15.2.8.1.3.1.4,HPN-ICF-ACL-MIB::hpnicfAclNameGroupMatchOrder,INTEGER,read-create,,current,config(1):auto(2),The match-order of name-acl group.
.1.3.6.1.4.1.11.2.14.11.15.2.8.1.3.1.5,HPN-ICF-ACL-MIB::hpnicfAclNameGroupSubitemNum,Integer32,read-only,,current,,The number of name-acl group's node.
.1.3.6.1.4.1.11.2.14.11.15.2.8.1.3.1.6,HPN-ICF-ACL-MIB::hpnicfAclNameGroupRowStatus,INTEGER,read-create,,current,active(1):notInService(2):notReady(3):createAndGo(4):createAndWait(5):destroy(6),RowStatus, now support three state: CreateAndGo, Active, Destroy.
.1.3.6.1.4.1.11.2.14.11.15.2.8.1.4,HPN-ICF-ACL-MIB::hpnicfAclBasicRuleTable,,not-accessible,,current,,Configure the rule for basic acl group.
.1.3.6.1.4.1.11.2.14.11.15.2.8.1.4.1,HPN-ICF-ACL-MIB::hpnicfAclBasicRuleEntry,,not-accessible,hpnicfAclBasicAclNum:hpnicfAclBasicSubitem,current,,Define the index of hpnicfAclBasicRuleTable.
.1.3.6.1.4.1.11.2.14.11.15.2.8.1.4.1.1,HPN-ICF-ACL-MIB::hpnicfAclBasicAclNum,Integer32,not-accessible,,current,,The index of basic acl group.
.1.3.6.1.4.1.11.2.14.11.15.2.8.1.4.1.2,HPN-ICF-ACL-MIB::hpnicfAclBasicSubitem,Integer32,not-accessible,,current,,The subindex of basic acl group.
.1.3.6.1.4.1.11.2.14.11.15.2.8.1.4.1.3,HPN-ICF-ACL-MIB::hpnicfAclBasicAct,INTEGER,read-create,,current,permit(1):deny(2),The action of basic acl rule.
.1.3.6.1.4.1.11.2.14.11.15.2.8.1.4.1.4,HPN-ICF-ACL-MIB::hpnicfAclBasicSrcIp,IpAddress,read-create,,current,,Source IP-address of basic acl rule.
.1.3.6.1.4.1.11.2.14.11.15.2.8.1.4.1.5,HPN-ICF-ACL-MIB::hpnicfAclBasicSrcWild,IpAddress,read-create,,current,,Source IP-address wild of basic acl rule.
.1.3.6.1.4.1.11.2.14.11.15.2.8.1.4.1.6,HPN-ICF-ACL-MIB::hpnicfAclBasicTimeRangeName,OCTET,read-create,,current,,The Time-range of basic acl rule.
.1.3.6.1.4.1.11.2.14.11.15.2.8.1.4.1.7,HPN-ICF-ACL-MIB::hpnicfAclBasicFragments,INTEGER,read-create,,current,true(1):false(2),The flag of matching fragmented packet.
.1.3.6.1.4.1.11.2.14.11.15.2.8.1.4.1.8,HPN-ICF-ACL-MIB::hpnicfAclBasicLog,INTEGER,read-create,,current,true(1):false(2),The flag of log.
.1.3.6.1.4.1.11.2.14.11.15.2.8.1.4.1.9,HPN-ICF-ACL-MIB::hpnicfAclBasicEnable,INTEGER,read-only,,current,true(1):false(2),The rule is active or not. true : active false : inactive 
.1.3.6.1.4.1.11.2.14.11.15.2.8.1.4.1.10,HPN-ICF-ACL-MIB::hpnicfAclBasicCount,Counter32,read-only,,current,,The count of matched by basic rule.
.1.3.6.1.4.1.11.2.14.11.15.2.8.1.4.1.11,HPN-ICF-ACL-MIB::hpnicfAclBasicCountClear,INTEGER,read-create,,current,cleared(1):nouse(2),Reset the value of counter.
.1.3.6.1.4.1.11.2.14.11.15.2.8.1.4.1.12,HPN-ICF-ACL-MIB::hpnicfAclBasicRowStatus,INTEGER,read-create,,current,active(1):notInService(2):notReady(3):createAndGo(4):createAndWait(5):destroy(6),RowStatus, now support three state: CreateAndGo, Active, Destroy.
.1.3.6.1.4.1.11.2.14.11.15.2.8.1.5,HPN-ICF-ACL-MIB::hpnicfAclAdvancedRuleTable,,not-accessible,,current,,Configure the rule for advanced acl group.
.1.3.6.1.4.1.11.2.14.11.15.2.8.1.5.1,HPN-ICF-ACL-MIB::hpnicfAclAdvancedRuleEntry,,not-accessible,hpnicfAclAdvancedAclNum:hpnicfAclAdvancedSubitem,current,,Define the index of hpnicfAclAdvancedRuleTable.
.1.3.6.1.4.1.11.2.14.11.15.2.8.1.5.1.1,HPN-ICF-ACL-MIB::hpnicfAclAdvancedAclNum,Integer32,not-accessible,,current,,The index of advanced acl group.
.1.3.6.1.4.1.11.2.14.11.15.2.8.1.5.1.2,HPN-ICF-ACL-MIB::hpnicfAclAdvancedSubitem,Integer32,not-accessible,,current,,The subindex of advanced acl group.
.1.3.6.1.4.1.11.2.14.11.15.2.8.1.5.1.3,HPN-ICF-ACL-MIB::hpnicfAclAdvancedAct,INTEGER,read-create,,current,permit(1):deny(2),The action of Advance acl rule.
.1.3.6.1.4.1.11.2.14.11.15.2.8.1.5.1.4,HPN-ICF-ACL-MIB::hpnicfAclAdvancedProtocol,Integer32,read-create,,current,,The protocol-type of advanced acl group. <1-255> Protocol number gre GRE tunneling(47) icmp Internet Control Message Protocol(1) igmp Internet Group Management Protocol(2) ip Any IP protocol ipinip IP in IP tunneling(4) ospf OSPF routing protocol(89) tcp Transmission Control Protocol (6) udp User Datagram Protocol (17)
.1.3.6.1.4.1.11.2.14.11.15.2.8.1.5.1.5,HPN-ICF-ACL-MIB::hpnicfAclAdvancedSrcIp,IpAddress,read-create,,current,,Source IP-address of advanced acl group.
.1.3.6.1.4.1.11.2.14.11.15.2.8.1.5.1.6,HPN-ICF-ACL-MIB::hpnicfAclAdvancedSrcWild,IpAddress,read-create,,current,,Source IP-address wild of advanced acl group.
.1.3.6.1.4.1.11.2.14.11.15.2.8.1.5.1.7,HPN-ICF-ACL-MIB::hpnicfAclAdvancedSrcOp,INTEGER,read-create,,current,invalid(0):lt(1):eq(2):gt(3):neq(4):range(5),The source IP-address's operator of advanced acl group.
.1.3.6.1.4.1.11.2.14.11.15.2.8.1.5.1.8,HPN-ICF-ACL-MIB::hpnicfAclAdvancedSrcPort1,Integer32,read-create,,current,,The fourth layer source port1.
.1.3.6.1.4.1.11.2.14.11.15.2.8.1.5.1.9,HPN-ICF-ACL-MIB::hpnicfAclAdvancedSrcPort2,Integer32,read-create,,current,,The fourth layer source port2.
.1.3.6.1.4.1.11.2.14.11.15.2.8.1.5.1.10,HPN-ICF-ACL-MIB::hpnicfAclAdvancedDestIp,IpAddress,read-create,,current,,Destination IP-address of advanced acl group.
.1.3.6.1.4.1.11.2.14.11.15.2.8.1.5.1.11,HPN-ICF-ACL-MIB::hpnicfAclAdvancedDestWild,IpAddress,read-create,,current,,Destination IP-address wild of advanced acl group.
.1.3.6.1.4.1.11.2.14.11.15.2.8.1.5.1.12,HPN-ICF-ACL-MIB::hpnicfAclAdvancedDestOp,INTEGER,read-create,,current,invalid(0):lt(1):eq(2):gt(3):neq(4):range(5),The destination IP-address's operator of advanced acl group.
.1.3.6.1.4.1.11.2.14.11.15.2.8.1.5.1.13,HPN-ICF-ACL-MIB::hpnicfAclAdvancedDestPort1,Integer32,read-create,,current,,The fourth layer destination port1.
.1.3.6.1.4.1.11.2.14.11.15.2.8.1.5.1.14,HPN-ICF-ACL-MIB::hpnicfAclAdvancedDestPort2,Integer32,read-create,,current,,The fourth layer destination port2.
.1.3.6.1.4.1.11.2.14.11.15.2.8.1.5.1.15,HPN-ICF-ACL-MIB::hpnicfAclAdvancedPrecedence,Integer32,read-create,,current,,The value of IP-packet's precedence. <0-7> Value of precedence routine Specify routine precedence(0) priority Specify priority precedence(1) immediate Specify immediate precedence(2) flash Specify flash precedence(3) flash-override Specify flash-override precedence(4) critical Specify critical precedence(5) internet Specify internetwork control precedence(6) network Specify network control precedence(7) 
.1.3.6.1.4.1.11.2.14.11.15.2.8.1.5.1.16,HPN-ICF-ACL-MIB::hpnicfAclAdvancedTos,Integer32,read-create,,current,,The value of IP-packet's TOS. <0-15> Value of TOS(type of service) max-reliability Match packets with max reliable TOS(2) max-throughput Match packets with max throughput TOS(4) min-delay Match packets with min delay TOS(8) min-monetary-cost Match packets with min monetary cost TOS(1) normal Match packets with normal TOS(0) 
.1.3.6.1.4.1.11.2.14.11.15.2.8.1.5.1.17,HPN-ICF-ACL-MIB::hpnicfAclAdvancedDscp,Integer32,read-create,,current,,The value of DSCP. <0-63> Value of DSCP af11 Specify Assured Forwarding 11 service(10) af12 Specify Assured Forwarding 12 service(12) af13 Specify Assured Forwarding 13 service(14) af21 Specify Assured Forwarding 21 service(18) af22 Specify Assured Forwarding 22 service(20) af23 Specify Assured Forwarding 23 service(22) af31 Specify Assured Forwarding 31 service(26) af32 Specify Assured Forwarding 32 service(28) af33 Specify Assured Forwarding 33 service(30) af41 Specify Assured Forwarding 41 service(34) af42 Specify Assured Forwarding 42 service(36) af43 Specify Assured Forwarding 43 service(38) be Specify Best Effort service(0) cs1 Specify Class Selector 1 service(8) cs2 Specify Class Selector 2 service(16) cs3 Specify Class Selector 3 service(24) cs4 Specify Class Selector 4 service(32) cs5 Specify Class Selector 5 service(40) cs6 Specify Class Selector 6 service(48) cs7 Specify Class Selector 7 service(56) ef Specify Expedited Forwarding service(46)
.1.3.6.1.4.1.11.2.14.11.15.2.8.1.5.1.18,HPN-ICF-ACL-MIB::hpnicfAclAdvancedEstablish,INTEGER,read-create,,current,true(1):false(2),Establish flag.
.1.3.6.1.4.1.11.2.14.11.15.2.8.1.5.1.19,HPN-ICF-ACL-MIB::hpnicfAclAdvancedTimeRangeName,OCTET,read-create,,current,,The Time-range of advanced acl rule.
.1.3.6.1.4.1.11.2.14.11.15.2.8.1.5.1.20,HPN-ICF-ACL-MIB::hpnicfAclAdvancedIcmpType,Integer32,read-create,,current,,The type of ICMP packet. Integer32 ICMP type echo Type=8, Code=0 echo-reply Type=0, Code=0 fragmentneed-DFset Type=3, Code=4 host-redirect Type=5, Code=1 host-tos-redirect Type=5, Code=3 host-unreachable Type=3, Code=1 information-reply Type=16, Code=0 information-request Type=15, Code=0 net-redirect Type=5, Code=0 net-tos-redirect Type=5, Code=2 net-unreachable Type=3, Code=0 parameter-problem Type=12, Code=0 port-unreachable Type=3, Code=3 protocol-unreachable Type=3, Code=2 reassembly-timeout Type=11, Code=1 source-quench Type=4, Code=0 source-route-failed Type=3, Code=5 timestamp-reply Type=14, Code=0 timestamp-request Type=13, Code=0 ttl-exceeded Type=11, Code=0 
.1.3.6.1.4.1.11.2.14.11.15.2.8.1.5.1.21,HPN-ICF-ACL-MIB::hpnicfAclAdvancedIcmpCode,Integer32,read-create,,current,,The code of ICMP packet.
.1.3.6.1.4.1.11.2.14.11.15.2.8.1.5.1.22,HPN-ICF-ACL-MIB::hpnicfAclAdvancedFragments,INTEGER,read-create,,current,true(1):false(2),The flag of matching fragmented packet.
.1.3.6.1.4.1.11.2.14.11.15.2.8.1.5.1.23,HPN-ICF-ACL-MIB::hpnicfAclAdvancedLog,INTEGER,read-create,,current,true(1):false(2),The flag of log.
.1.3.6.1.4.1.11.2.14.11.15.2.8.1.5.1.24,HPN-ICF-ACL-MIB::hpnicfAclAdvancedEnable,INTEGER,read-only,,current,true(1):false(2),The rule is active or not. true : active false : inactive 
.1.3.6.1.4.1.11.2.14.11.15.2.8.1.5.1.25,HPN-ICF-ACL-MIB::hpnicfAclAdvancedCount,Counter32,read-only,,current,,The count of matched by advanced rule.
.1.3.6.1.4.1.11.2.14.11.15.2.8.1.5.1.26,HPN-ICF-ACL-MIB::hpnicfAclAdvancedCountClear,INTEGER,read-create,,current,cleared(1):nouse(2),Reset the value of counter.
.1.3.6.1.4.1.11.2.14.11.15.2.8.1.5.1.27,HPN-ICF-ACL-MIB::hpnicfAclAdvancedRowStatus,INTEGER,read-create,,current,active(1):notInService(2):notReady(3):createAndGo(4):createAndWait(5):destroy(6),RowStatus, now support three state: CreateAndGo, Active, Destroy.
.1.3.6.1.4.1.11.2.14.11.15.2.8.1.6,HPN-ICF-ACL-MIB::hpnicfAclIfRuleTable,,not-accessible,,current,,Configure the rule for interface-based acl group.
.1.3.6.1.4.1.11.2.14.11.15.2.8.1.6.1,HPN-ICF-ACL-MIB::hpnicfAclIfRuleEntry,,not-accessible,hpnicfAclIfAclNum:hpnicfAclIfSubitem,current,,Define the index of hpnicfAclIfRuleTable.
.1.3.6.1.4.1.11.2.14.11.15.2.8.1.6.1.1,HPN-ICF-ACL-MIB::hpnicfAclIfAclNum,Integer32,not-accessible,,current,,The index of interface-based acl group.
.1.3.6.1.4.1.11.2.14.11.15.2.8.1.6.1.2,HPN-ICF-ACL-MIB::hpnicfAclIfSubitem,Integer32,not-accessible,,current,,The subindex of interface-based acl group.
.1.3.6.1.4.1.11.2.14.11.15.2.8.1.6.1.3,HPN-ICF-ACL-MIB::hpnicfAclIfAct,INTEGER,read-create,,current,permit(1):deny(2),The action of interface-based acl group.
.1.3.6.1.4.1.11.2.14.11.15.2.8.1.6.1.4,HPN-ICF-ACL-MIB::hpnicfAclIfIndex,Integer32,read-create,,current,,The index of interface.
.1.3.6.1.4.1.11.2.14.11.15.2.8.1.6.1.5,HPN-ICF-ACL-MIB::hpnicfAclIfAny,INTEGER,read-create,,current,true(1):false(2),The flag of matching any interface.
.1.3.6.1.4.1.11.2.14.11.15.2.8.1.6.1.6,HPN-ICF-ACL-MIB::hpnicfAclIfTimeRangeName,OCTET,read-create,,current,,The Time-range of interface-based acl rule.
.1.3.6.1.4.1.11.2.14.11.15.2.8.1.6.1.7,HPN-ICF-ACL-MIB::hpnicfAclIfLog,INTEGER,read-create,,current,true(1):false(2),The flag of log.
.1.3.6.1.4.1.11.2.14.11.15.2.8.1.6.1.8,HPN-ICF-ACL-MIB::hpnicfAclIfEnable,INTEGER,read-only,,current,true(1):false(2),The rule is active or not. true : active false : inactive 
.1.3.6.1.4.1.11.2.14.11.15.2.8.1.6.1.9,HPN-ICF-ACL-MIB::hpnicfAclIfCount,Counter32,read-only,,current,,The count of matched by basic rule.
.1.3.6.1.4.1.11.2.14.11.15.2.8.1.6.1.10,HPN-ICF-ACL-MIB::hpnicfAclIfCountClear,INTEGER,read-create,,current,cleared(1):nouse(2),Reset the value of the rule's counter.
.1.3.6.1.4.1.11.2.14.11.15.2.8.1.6.1.11,HPN-ICF-ACL-MIB::hpnicfAclIfRowStatus,INTEGER,read-create,,current,active(1):notInService(2):notReady(3):createAndGo(4):createAndWait(5):destroy(6),RowStatus, now support three state: CreateAndGo, Active, Destroy.
.1.3.6.1.4.1.11.2.14.11.15.2.8.1.7,HPN-ICF-ACL-MIB::hpnicfAclLinkTable,,not-accessible,,current,,Create link acl.
.1.3.6.1.4.1.11.2.14.11.15.2.8.1.7.1,HPN-ICF-ACL-MIB::hpnicfAclLinkEntry,,not-accessible,hpnicfAclLinkAclNum:hpnicfAclLinkSubitem,current,,The entry of the link acl table.
.1.3.6.1.4.1.11.2.14.11.15.2.8.1.7.1.1,HPN-ICF-ACL-MIB::hpnicfAclLinkAclNum,Integer32,not-accessible,,current,,The index of link-based acl group.
.1.3.6.1.4.1.11.2.14.11.15.2.8.1.7.1.2,HPN-ICF-ACL-MIB::hpnicfAclLinkSubitem,Integer32,not-accessible,,current,,The subindex of link-based acl group.
.1.3.6.1.4.1.11.2.14.11.15.2.8.1.7.1.3,HPN-ICF-ACL-MIB::hpnicfAclLinkAct,INTEGER,read-create,,current,permit(1):deny(2),The action of link-based acl group.
.1.3.6.1.4.1.11.2.14.11.15.2.8.1.7.1.4,HPN-ICF-ACL-MIB::hpnicfAclLinkProtocol,INTEGER,read-create,,current,invalid(0):ip(2048):arp(2054):rarp(32821):pppoeControl(34915):pppoeData(34916):mpls(34887),The layer 2 protocol-type of link acl rule.
.1.3.6.1.4.1.11.2.14.11.15.2.8.1.7.1.5,HPN-ICF-ACL-MIB::hpnicfAclLinkFormatType,INTEGER,read-create,,current,invalid(0):ethernetII(1):snap(2):ieee802Dot3And2(3):ieee802Dot3(4),Format type of link acl rule.
.1.3.6.1.4.1.11.2.14.11.15.2.8.1.7.1.6,HPN-ICF-ACL-MIB::hpnicfAclLinkVlanTag,INTEGER,read-create,,current,invalid(0):tagged(1):untagged(2),The flag of vlan tag of link acl rule.
.1.3.6.1.4.1.11.2.14.11.15.2.8.1.7.1.7,HPN-ICF-ACL-MIB::hpnicfAclLinkVlanPri,Integer32,read-create,,current,,Vlan priority of link acl rule.
.1.3.6.1.4.1.11.2.14.11.15.2.8.1.7.1.8,HPN-ICF-ACL-MIB::hpnicfAclLinkSrcVlanId,Integer32,read-create,,current,,Source vlan ID of link acl rule.
.1.3.6.1.4.1.11.2.14.11.15.2.8.1.7.1.9,HPN-ICF-ACL-MIB::hpnicfAclLinkSrcMac,OCTET,read-create,,current,,Source mac of link acl rule.
.1.3.6.1.4.1.11.2.14.11.15.2.8.1.7.1.10,HPN-ICF-ACL-MIB::hpnicfAclLinkSrcMacWild,OCTET,read-create,,current,,Source mac wildzard of link acl rule.
.1.3.6.1.4.1.11.2.14.11.15.2.8.1.7.1.11,HPN-ICF-ACL-MIB::hpnicfAclLinkSrcIfIndex,Integer32,read-create,,current,,Source IfIndex of link acl rule.
.1.3.6.1.4.1.11.2.14.11.15.2.8.1.7.1.12,HPN-ICF-ACL-MIB::hpnicfAclLinkSrcAny,INTEGER,read-create,,current,true(1):false(2),The flag of matching any source.
.1.3.6.1.4.1.11.2.14.11.15.2.8.1.7.1.13,HPN-ICF-ACL-MIB::hpnicfAclLinkDestVlanId,Integer32,read-create,,current,,Destination vlan ID of link acl rule.
.1.3.6.1.4.1.11.2.14.11.15.2.8.1.7.1.14,HPN-ICF-ACL-MIB::hpnicfAclLinkDestMac,OCTET,read-create,,current,,Destination mac of link acl rule.
.1.3.6.1.4.1.11.2.14.11.15.2.8.1.7.1.15,HPN-ICF-ACL-MIB::hpnicfAclLinkDestMacWild,OCTET,read-create,,current,,Destination mac wildzard of link acl rule.
.1.3.6.1.4.1.11.2.14.11.15.2.8.1.7.1.16,HPN-ICF-ACL-MIB::hpnicfAclLinkDestIfIndex,Integer32,read-create,,current,,Destination IfIndex of link acl rule.
.1.3.6.1.4.1.11.2.14.11.15.2.8.1.7.1.17,HPN-ICF-ACL-MIB::hpnicfAclLinkDestAny,INTEGER,read-create,,current,true(1):false(2),The flag of matching any destination.
.1.3.6.1.4.1.11.2.14.11.15.2.8.1.7.1.18,HPN-ICF-ACL-MIB::hpnicfAclLinkTimeRangeName,OCTET,read-create,,current,,The Time-range of link-based acl rule.
.1.3.6.1.4.1.11.2.14.11.15.2.8.1.7.1.19,HPN-ICF-ACL-MIB::hpnicfAclLinkEnable,INTEGER,read-only,,current,true(1):false(2),The rule is active or not. true : active false : inactive 
.1.3.6.1.4.1.11.2.14.11.15.2.8.1.7.1.20,HPN-ICF-ACL-MIB::hpnicfAclLinkRowStatus,INTEGER,read-create,,current,active(1):notInService(2):notReady(3):createAndGo(4):createAndWait(5):destroy(6),RowStatus, now support three state: CreateAndGo, Active, Destroy.
.1.3.6.1.4.1.11.2.14.11.15.2.8.1.7.1.21,HPN-ICF-ACL-MIB::hpnicfAclLinkTypeCode,OCTET,read-create,,current,,The type of layer 2 protocol.0x0000...0xffff.
.1.3.6.1.4.1.11.2.14.11.15.2.8.1.7.1.22,HPN-ICF-ACL-MIB::hpnicfAclLinkTypeMask,OCTET,read-create,,current,,The mask of layer 2 protocol.0x0000...0xffff.
.1.3.6.1.4.1.11.2.14.11.15.2.8.1.7.1.23,HPN-ICF-ACL-MIB::hpnicfAclLinkLsapCode,OCTET,read-create,,current,,The type of LSAP.0x0000...0xffff.
.1.3.6.1.4.1.11.2.14.11.15.2.8.1.7.1.24,HPN-ICF-ACL-MIB::hpnicfAclLinkLsapMask,OCTET,read-create,,current,,The mask of LSAP.0x0000...0xffff.
.1.3.6.1.4.1.11.2.14.11.15.2.8.1.7.1.25,HPN-ICF-ACL-MIB::hpnicfAclLinkL2LabelRangeOp,INTEGER,read-create,,current,invalid(0):lt(1):eq(2):gt(3):neq(4):range(5),Operation symbol of the MPLS label. If the symbol is range(5), the objects hpnicfAclLinkL2LabelRangeBegin and hpnicfAclLinkL2LabelRangeEnd should have different values indicating a range. Otherwise, only hpnicfAclLinkL2LabelRangeBegin counts, object hpnicfAclLinkL2LabelRangeEnd is ignored. invalid(0) -- unavailable lt(1) -- less than eq(2) -- equal gt(3) -- great than neq(4) -- not equal range(5) -- a range with two ends included 
.1.3.6.1.4.1.11.2.14.11.15.2.8.1.7.1.26,HPN-ICF-ACL-MIB::hpnicfAclLinkL2LabelRangeBegin,Integer32,read-create,,current,,The beginning of VPLS VC label.
.1.3.6.1.4.1.11.2.14.11.15.2.8.1.7.1.27,HPN-ICF-ACL-MIB::hpnicfAclLinkL2LabelRangeEnd,Integer32,read-create,,current,,The end of VPLS VC label.
.1.3.6.1.4.1.11.2.14.11.15.2.8.1.7.1.28,HPN-ICF-ACL-MIB::hpnicfAclLinkMplsExp,Integer32,read-create,,current,,The value of MPLS-packet's Exp.
.1.3.6.1.4.1.11.2.14.11.15.2.8.1.8,HPN-ICF-ACL-MIB::hpnicfAclUserTable,,not-accessible,,current,,Create user acl.
.1.3.6.1.4.1.11.2.14.11.15.2.8.1.8.1,HPN-ICF-ACL-MIB::hpnicfAclUserEntry,,not-accessible,hpnicfAclUserAclNum:hpnicfAclUserSubitem,current,,The entry of user acl table.
.1.3.6.1.4.1.11.2.14.11.15.2.8.1.8.1.1,HPN-ICF-ACL-MIB::hpnicfAclUserAclNum,Integer32,not-accessible,,current,,The number of the user acl.
.1.3.6.1.4.1.11.2.14.11.15.2.8.1.8.1.2,HPN-ICF-ACL-MIB::hpnicfAclUserSubitem,Integer32,not-accessible,,current,,The subitem of the user acl.
.1.3.6.1.4.1.11.2.14.11.15.2.8.1.8.1.3,HPN-ICF-ACL-MIB::hpnicfAclUserAct,INTEGER,read-create,,current,permit(1):deny(2),The action of the user acl.
.1.3.6.1.4.1.11.2.14.11.15.2.8.1.8.1.4,HPN-ICF-ACL-MIB::hpnicfAclUserFormatType,INTEGER,read-create,,current,invalid(0):ethernetII(1):snap(2):ieee802Dot2And3(3):ieee802Dot4(4),Format type.
.1.3.6.1.4.1.11.2.14.11.15.2.8.1.8.1.5,HPN-ICF-ACL-MIB::hpnicfAclUserVlanTag,INTEGER,read-create,,current,tagged(1):untagged(2):invalid(0),Vlan tag exits or not.
.1.3.6.1.4.1.11.2.14.11.15.2.8.1.8.1.6,HPN-ICF-ACL-MIB::hpnicfAclUserRuleStr,OCTET,read-create,,current,,Rule string.
.1.3.6.1.4.1.11.2.14.11.15.2.8.1.8.1.7,HPN-ICF-ACL-MIB::hpnicfAclUserRuleMask,OCTET,read-create,,current,,Rule mask.
.1.3.6.1.4.1.11.2.14.11.15.2.8.1.8.1.8,HPN-ICF-ACL-MIB::hpnicfAclUserTimeRangeName,OCTET,read-create,,current,,The Time-range of the user defined acl.
.1.3.6.1.4.1.11.2.14.11.15.2.8.1.8.1.9,HPN-ICF-ACL-MIB::hpnicfAclUserEnable,INTEGER,read-only,,current,true(1):false(2),The rule is active or not. true : active false : inactive 
.1.3.6.1.4.1.11.2.14.11.15.2.8.1.8.1.10,HPN-ICF-ACL-MIB::hpnicfAclUserRowStatus,INTEGER,read-create,,current,active(1):notInService(2):notReady(3):createAndGo(4):createAndWait(5):destroy(6),RowStatus, now support three state: CreateAndGo, Active, Destroy.
.1.3.6.1.4.1.11.2.14.11.15.2.8.1.9,HPN-ICF-ACL-MIB::hpnicfAclActiveTable,,not-accessible,,current,,Active acl.
.1.3.6.1.4.1.11.2.14.11.15.2.8.1.9.1,HPN-ICF-ACL-MIB::hpnicfAclActiveEntry,,not-accessible,hpnicfAclActiveAclIndex:hpnicfAclActiveIfIndex:hpnicfAclActiveVlanID:hpnicfAclActiveDirection,current,,The entry of active acl table.
.1.3.6.1.4.1.11.2.14.11.15.2.8.1.9.1.1,HPN-ICF-ACL-MIB::hpnicfAclActiveAclIndex,Integer32,not-accessible,,current,,Acl index.
.1.3.6.1.4.1.11.2.14.11.15.2.8.1.9.1.2,HPN-ICF-ACL-MIB::hpnicfAclActiveIfIndex,Integer32,not-accessible,,current,,IfIndex.
.1.3.6.1.4.1.11.2.14.11.15.2.8.1.9.1.3,HPN-ICF-ACL-MIB::hpnicfAclActiveVlanID,Integer32,not-accessible,,current,,The lower 16 bits is Vlan ID, the higher 16 bits, if not zero, it describes the slot ID of the L3plus board. 
.1.3.6.1.4.1.11.2.14.11.15.2.8.1.9.1.4,HPN-ICF-ACL-MIB::hpnicfAclActiveDirection,INTEGER,not-accessible,,current,input(1):output(2):both(3):invalid(0),Direction.
.1.3.6.1.4.1.11.2.14.11.15.2.8.1.9.1.5,HPN-ICF-ACL-MIB::hpnicfAclActiveUserAclNum,Integer32,read-create,,current,,The number of the user acl.
.1.3.6.1.4.1.11.2.14.11.15.2.8.1.9.1.6,HPN-ICF-ACL-MIB::hpnicfAclActiveUserAclSubitem,Integer32,read-create,,current,,The subitem of the user acl.
.1.3.6.1.4.1.11.2.14.11.15.2.8.1.9.1.7,HPN-ICF-ACL-MIB::hpnicfAclActiveIpAclNum,Integer32,read-create,,current,,The number of the IP acl.
.1.3.6.1.4.1.11.2.14.11.15.2.8.1.9.1.8,HPN-ICF-ACL-MIB::hpnicfAclActiveIpAclSubitem,Integer32,read-create,,current,,The subitem of the IP acl.
.1.3.6.1.4.1.11.2.14.11.15.2.8.1.9.1.9,HPN-ICF-ACL-MIB::hpnicfAclActiveLinkAclNum,Integer32,read-create,,current,,The num of the link acl.
.1.3.6.1.4.1.11.2.14.11.15.2.8.1.9.1.10,HPN-ICF-ACL-MIB::hpnicfAclActiveLinkAclSubitem,Integer32,read-create,,current,,The subitem of the link acl.
.1.3.6.1.4.1.11.2.14.11.15.2.8.1.9.1.11,HPN-ICF-ACL-MIB::hpnicfAclActiveRuntime,INTEGER,read-only,,current,true(1):false(2),Is run or not.
.1.3.6.1.4.1.11.2.14.11.15.2.8.1.9.1.12,HPN-ICF-ACL-MIB::hpnicfAclActiveRowStatus,INTEGER,read-create,,current,active(1):notInService(2):notReady(3):createAndGo(4):createAndWait(5):destroy(6),RowStatus, now support three state: CreateAndGo, Active, Destroy.
.1.3.6.1.4.1.11.2.14.11.15.2.8.1.10,HPN-ICF-ACL-MIB::hpnicfAclIDSTable,,not-accessible,,current,,Configure the rule for IDS.
.1.3.6.1.4.1.11.2.14.11.15.2.8.1.10.1,HPN-ICF-ACL-MIB::hpnicfAclIDSEntry,,not-accessible,IMPLIEDhpnicfAclIDSName,current,,The entry of acl ids table.
.1.3.6.1.4.1.11.2.14.11.15.2.8.1.10.1.1,HPN-ICF-ACL-MIB::hpnicfAclIDSName,OCTET,not-accessible,,current,,The name index of the IDS table.
.1.3.6.1.4.1.11.2.14.11.15.2.8.1.10.1.2,HPN-ICF-ACL-MIB::hpnicfAclIDSSrcMac,OCTET,read-create,,current,,Source mac of IDS acl rule.
.1.3.6.1.4.1.11.2.14.11.15.2.8.1.10.1.3,HPN-ICF-ACL-MIB::hpnicfAclIDSDestMac,OCTET,read-create,,current,,Destination mac of IDS acl rule.
.1.3.6.1.4.1.11.2.14.11.15.2.8.1.10.1.4,HPN-ICF-ACL-MIB::hpnicfAclIDSSrcIp,IpAddress,read-create,,current,,Source IP-address of IDS acl rule.
.1.3.6.1.4.1.11.2.14.11.15.2.8.1.10.1.5,HPN-ICF-ACL-MIB::hpnicfAclIDSSrcWild,IpAddress,read-create,,current,,Source IP-address wild of IDS acl rule.
.1.3.6.1.4.1.11.2.14.11.15.2.8.1.10.1.6,HPN-ICF-ACL-MIB::hpnicfAclIDSDestIp,IpAddress,read-create,,current,,Destination IP-address of IDS acl rule.
.1.3.6.1.4.1.11.2.14.11.15.2.8.1.10.1.7,HPN-ICF-ACL-MIB::hpnicfAclIDSDestWild,IpAddress,read-create,,current,,Destination IP-address wild of IDS acl rule.
.1.3.6.1.4.1.11.2.14.11.15.2.8.1.10.1.8,HPN-ICF-ACL-MIB::hpnicfAclIDSSrcPort,Integer32,read-create,,current,,The fourth layer source port.
.1.3.6.1.4.1.11.2.14.11.15.2.8.1.10.1.9,HPN-ICF-ACL-MIB::hpnicfAclIDSDestPort,Integer32,read-create,,current,,The fourth layer destination port.
.1.3.6.1.4.1.11.2.14.11.15.2.8.1.10.1.10,HPN-ICF-ACL-MIB::hpnicfAclIDSProtocol,Integer32,read-create,,current,,The protocol-type of advanced acl group. <1-255> Protocol number gre GRE tunneling(47) icmp Internet Control Message Protocol(1) igmp Internet Group Management Protocol(2) ip Any IP protocol ipinip IP in IP tunneling(4) ospf OSPF routing protocol(89) tcp Transmission Control Protocol (6) udp User Datagram Protocol (17) 
.1.3.6.1.4.1.11.2.14.11.15.2.8.1.10.1.11,HPN-ICF-ACL-MIB::hpnicfAclIDSDenyTime,Unsigned32,read-create,,current,,The maximum number of seconds which deny for this acl rule.
.1.3.6.1.4.1.11.2.14.11.15.2.8.1.10.1.12,HPN-ICF-ACL-MIB::hpnicfAclIDSAct,INTEGER,read-create,,current,permit(1):deny(2),The action of IDS acl rule.
.1.3.6.1.4.1.11.2.14.11.15.2.8.1.10.1.13,HPN-ICF-ACL-MIB::hpnicfAclIDSRowStatus,INTEGER,read-create,,current,active(1):notInService(2):notReady(3):createAndGo(4):createAndWait(5):destroy(6),RowStatus, now supports three states: CreateAndGo, Active, and Destroy.
.1.3.6.1.4.1.11.2.14.11.15.2.8.2,HPN-ICF-ACL-MIB::hpnicfAclMib2Objects,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.2.8.2.1,HPN-ICF-ACL-MIB::hpnicfAclMib2GlobalGroup,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.2.8.2.1.1,HPN-ICF-ACL-MIB::hpnicfAclMib2NodesGroup,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.2.8.2.1.1.1,HPN-ICF-ACL-MIB::hpnicfAclMib2Mode,INTEGER,read-write,,current,linkBased(1):ipBased(2),The applying mode of ACL.
.1.3.6.1.4.1.11.2.14.11.15.2.8.2.1.1.2,HPN-ICF-ACL-MIB::hpnicfAclMib2Version,Integer32,read-only,,current,,The version of this file. The output value has the format of 'xx'or 'xxx'. For example: 10 means 1.0; 125 means 12.5. 
.1.3.6.1.4.1.11.2.14.11.15.2.8.2.1.1.3,HPN-ICF-ACL-MIB::hpnicfAclMib2ObjectsCapabilities,BITS,read-only,,current,hpnicfAclMib2Mode(0):hpnicfAclVersion(1):hpnicfAclMib2ObjectsCapabilities(2):hpnicfAclMib2CapabilityTable(3):hpnicfAclNumberGroupTable(4):hpnicfAclIPAclBasicTable(5):hpnicfAclIPAclAdvancedTable(6):hpnicfAclMACTable(7):hpnicfAclEnUserTable(8):hpnicfAclMib2ProcessingStatus(9),The objects of hpnicfAclMib2Objects.
.1.3.6.1.4.1.11.2.14.11.15.2.8.2.1.1.4,HPN-ICF-ACL-MIB::hpnicfAclMib2ProcessingStatus,INTEGER,read-only,,current,processing(1):done(2),The processing status of ACL operation.
.1.3.6.1.4.1.11.2.14.11.15.2.8.2.1.2,HPN-ICF-ACL-MIB::hpnicfAclMib2CapabilityTable,,not-accessible,,current,,The capability of mib2.
.1.3.6.1.4.1.11.2.14.11.15.2.8.2.1.2.1,HPN-ICF-ACL-MIB::hpnicfAclMib2CapabilityEntry,,not-accessible,hpnicfAclMib2EntityType:hpnicfAclMib2EntityIndex:hpnicfAclMib2ModuleIndex:hpnicfAclMib2CharacteristicsIndex,current,,The information of Capability of mib2.
.1.3.6.1.4.1.11.2.14.11.15.2.8.2.1.2.1.1,HPN-ICF-ACL-MIB::hpnicfAclMib2EntityType,INTEGER,not-accessible,,current,system(1):interface(2),The type of entity . system: The entity is systemic level. interface: The entity is interface level. 
.1.3.6.1.4.1.11.2.14.11.15.2.8.2.1.2.1.2,HPN-ICF-ACL-MIB::hpnicfAclMib2EntityIndex,Integer32,not-accessible,,current,,The index of entity. If hpnicfAclMib2EntityType is system, the value of this object is 0. If hpnicfAclMib2EntityType is interface, the value of this object is equal to 'ifIndex'. 
.1.3.6.1.4.1.11.2.14.11.15.2.8.2.1.2.1.3,HPN-ICF-ACL-MIB::hpnicfAclMib2ModuleIndex,INTEGER,not-accessible,,current,layer3(1):layer2(2):userDefined(3),The module index of ACL.
.1.3.6.1.4.1.11.2.14.11.15.2.8.2.1.2.1.4,HPN-ICF-ACL-MIB::hpnicfAclMib2CharacteristicsIndex,Integer32,not-accessible,,current,,The characteristics index of mib2. See DESCRIPTION of hpnicfAclMib2CharacteristicsValue to get detail information about the value of this object. 
.1.3.6.1.4.1.11.2.14.11.15.2.8.2.1.2.1.5,HPN-ICF-ACL-MIB::hpnicfAclMib2CharacteristicsDesc,OCTET,read-only,,current,,The description of characteristics.
.1.3.6.1.4.1.11.2.14.11.15.2.8.2.1.2.1.6,HPN-ICF-ACL-MIB::hpnicfAclMib2CharacteristicsValue,Unsigned32,read-only,,current,,The value of capability of this object. TypeOfRuleStringValue : notSupport(0) and the length of RuleString. TypeOfCodeValue : OnlyOneNotSupport(0), MoreThanOneNotSupport(1) If hpnicfAclMib2CharacteristicsValue is 'moreThanOneNotSupport', hpnicfAclMib2CharacteristicsDesc must be used to depict which protocols are not supported. The output value of hpnicfAclMib2CharacteristicsDesc has the format of 'a,b'. For example, 'ip,rarp'. layer3 Module: Index Characteristics value 1 SourceIPAddress notSupport(0) 2 DestinationIPAddress notSupport(0) 3 SourcePort notSupport(0) 4 DestinationPort notSupport(0) 5 IPPrecedence notSupport(0) 6 TOS notSupport(0) 7 DSCP notSupport(0) 8 TCPFlag notSupport(0) 9 FragmentFlag notSupport(0) 10 Log notSupport(0) 11 RuleMatchCounter notSupport(0) 12 ResetRuleMatchCounter notSupport(0) 13 VPN notSupport(0) 15 protocol notSupport(0) 16 AddressFlag notSupport(0) layer2 Module: Index Characteristics value 1 ProtocolType TypeOfCodeValue 2 SourceMAC notSupport(0) 3 DestinationMAC notSupport(0) 4 LSAPType TypeOfCodeValue 5 CoS notSupport(0) UserDefined Module: Index Characteristics value 1 UserDefaultOffset TypeOfRuleStringValue 2 UserL2RuleOffset TypeOfRuleStringValue 3 UserMplsOffset TypeOfRuleStringValue 4 UserIPv4Offset TypeOfRuleStringValue 5 UserIPv6Offset TypeOfRuleStringValue 6 UserL4Offset TypeOfRuleStringValue 7 UserL5Offset TypeOfRuleStringValue 
.1.3.6.1.4.1.11.2.14.11.15.2.8.2.1.3,HPN-ICF-ACL-MIB::hpnicfAclNumberGroupTable,,not-accessible,,current,,A table of the number acl group information.
.1.3.6.1.4.1.11.2.14.11.15.2.8.2.1.3.1,HPN-ICF-ACL-MIB::hpnicfAclNumberGroupEntry,,not-accessible,hpnicfAclNumberGroupType:hpnicfAclNumberGroupIndex,current,,Number acl group information entry.
.1.3.6.1.4.1.11.2.14.11.15.2.8.2.1.3.1.1,HPN-ICF-ACL-MIB::hpnicfAclNumberGroupType,INTEGER,not-accessible,,current,ipv4(1):ipv6(2),The type of number group. Basic ACL and Advanced ACL support ipv4 and ipv6. The range of Basic ACL is from 2000 to 2999. The range of Advanced ACL is from 3000 to 3999. Simple ACL supports ipv6 only. The range of Simple ACL is from 10000 to 42767. MAC ACL and User ACL support ipv4 only. The range of MAC ACL is from 4000 to 4999. The range of User ACL is from 5000 to 5999. 
.1.3.6.1.4.1.11.2.14.11.15.2.8.2.1.3.1.2,HPN-ICF-ACL-MIB::hpnicfAclNumberGroupIndex,Integer32,not-accessible,,current,,The group index of number acl. Basic type:2000..2999 Advanced type:3000..3999 MAC type:4000..4999 User type:5000..5999 Simple type:10000..42767 
.1.3.6.1.4.1.11.2.14.11.15.2.8.2.1.3.1.3,HPN-ICF-ACL-MIB::hpnicfAclNumberGroupRowStatus,INTEGER,read-create,,current,active(1):notInService(2):notReady(3):createAndGo(4):createAndWait(5):destroy(6),RowStatus.
.1.3.6.1.4.1.11.2.14.11.15.2.8.2.1.3.1.4,HPN-ICF-ACL-MIB::hpnicfAclNumberGroupMatchOrder,INTEGER,read-create,,current,config(1):auto(2),The match-order of number acl group.
.1.3.6.1.4.1.11.2.14.11.15.2.8.2.1.3.1.5,HPN-ICF-ACL-MIB::hpnicfAclNumberGroupStep,Integer32,read-create,,current,,The step of rule index.
.1.3.6.1.4.1.11.2.14.11.15.2.8.2.1.3.1.6,HPN-ICF-ACL-MIB::hpnicfAclNumberGroupDescription,OCTET,read-create,,current,,Description of this acl group.
.1.3.6.1.4.1.11.2.14.11.15.2.8.2.1.3.1.7,HPN-ICF-ACL-MIB::hpnicfAclNumberGroupCountClear,INTEGER,read-write,,current,cleared(1):nouse(2),Reset the value of counters of this group.
.1.3.6.1.4.1.11.2.14.11.15.2.8.2.1.3.1.8,HPN-ICF-ACL-MIB::hpnicfAclNumberGroupRuleCounter,Counter32,read-only,,current,,The rule count of number acl group.
.1.3.6.1.4.1.11.2.14.11.15.2.8.2.1.3.1.9,HPN-ICF-ACL-MIB::hpnicfAclNumberGroupName,OCTET,read-create,,current,,Name of this acl group.
.1.3.6.1.4.1.11.2.14.11.15.2.8.2.2,HPN-ICF-ACL-MIB::hpnicfAclIPAclGroup,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.2.8.2.2.2,HPN-ICF-ACL-MIB::hpnicfAclIPAclBasicTable,,not-accessible,,current,,A table of basic rule group. If some objects of this table are not supported by some products, these objects can't be created, changed and applied. Default value of these objects will be returned when they are read. 
.1.3.6.1.4.1.11.2.14.11.15.2.8.2.2.2.1,HPN-ICF-ACL-MIB::hpnicfAclIPAclBasicEntry,,not-accessible,hpnicfAclNumberGroupType:hpnicfAclNumberGroupIndex:hpnicfAclIPAclBasicRuleIndex,current,,Basic rule group information.
.1.3.6.1.4.1.11.2.14.11.15.2.8.2.2.2.1.1,HPN-ICF-ACL-MIB::hpnicfAclIPAclBasicRuleIndex,Integer32,not-accessible,,current,,The rule index of basic acl group.
.1.3.6.1.4.1.11.2.14.11.15.2.8.2.2.2.1.2,HPN-ICF-ACL-MIB::hpnicfAclIPAclBasicRowStatus,INTEGER,read-create,,current,active(1):notInService(2):notReady(3):createAndGo(4):createAndWait(5):destroy(6),RowStatus.
.1.3.6.1.4.1.11.2.14.11.15.2.8.2.2.2.1.3,HPN-ICF-ACL-MIB::hpnicfAclIPAclBasicAct,INTEGER,read-create,,current,invalid(1):permit(2):deny(3),The action of basic acl rule.
.1.3.6.1.4.1.11.2.14.11.15.2.8.2.2.2.1.4,HPN-ICF-ACL-MIB::hpnicfAclIPAclBasicSrcAddrType,INTEGER,read-create,,current,unknown(0):ipv4(1):ipv6(2):ipv4z(3):ipv6z(4):dns(16),The IP addresses type of IP pool.
.1.3.6.1.4.1.11.2.14.11.15.2.8.2.2.2.1.5,HPN-ICF-ACL-MIB::hpnicfAclIPAclBasicSrcAddr,OCTET,read-create,,current,,The value of a local IP address is available for this association. The type of this address is determined by the value of hpnicfAclIPAclBasicSrcAddrType. 
.1.3.6.1.4.1.11.2.14.11.15.2.8.2.2.2.1.6,HPN-ICF-ACL-MIB::hpnicfAclIPAclBasicSrcPrefix,Unsigned32,read-create,,current,,Denotes the length of a generic Internet network address prefix. A value of n corresponds to an IP address mask which has n contiguous 1-bits from the most significant bit (MSB) and all other bits set to 0. 
.1.3.6.1.4.1.11.2.14.11.15.2.8.2.2.2.1.7,HPN-ICF-ACL-MIB::hpnicfAclIPAclBasicSrcAny,INTEGER,read-create,,current,true(1):false(2),The flag of matching any IP address.
.1.3.6.1.4.1.11.2.14.11.15.2.8.2.2.2.1.8,HPN-ICF-ACL-MIB::hpnicfAclIPAclBasicSrcWild,IpAddress,read-create,,current,,Source IPv4 address wild. Only IPv4 Basic Rule support this object. Default value is '0.0.0.0'. 
.1.3.6.1.4.1.11.2.14.11.15.2.8.2.2.2.1.9,HPN-ICF-ACL-MIB::hpnicfAclIPAclBasicTimeRangeName,OCTET,read-create,,current,,The Time-range of basic acl rule. Default value is null. 
.1.3.6.1.4.1.11.2.14.11.15.2.8.2.2.2.1.10,HPN-ICF-ACL-MIB::hpnicfAclIPAclBasicFragmentFlag,INTEGER,read-create,,current,invalid(0):fragment(1):fragmentSubseq(2):nonFragment(3):nonSubseq(4),The flag of matching fragmented packets.
.1.3.6.1.4.1.11.2.14.11.15.2.8.2.2.2.1.11,HPN-ICF-ACL-MIB::hpnicfAclIPAclBasicLog,INTEGER,read-create,,current,true(1):false(2),The packet will be logged when it matches the rule.
.1.3.6.1.4.1.11.2.14.11.15.2.8.2.2.2.1.12,HPN-ICF-ACL-MIB::hpnicfAclIPAclBasicCount,Unsigned32,read-only,,current,,The count of matched by the rule.
.1.3.6.1.4.1.11.2.14.11.15.2.8.2.2.2.1.13,HPN-ICF-ACL-MIB::hpnicfAclIPAclBasicCountClear,INTEGER,read-write,,current,cleared(1):nouse(2),Reset the value of counter.
.1.3.6.1.4.1.11.2.14.11.15.2.8.2.2.2.1.14,HPN-ICF-ACL-MIB::hpnicfAclIPAclBasicEnable,INTEGER,read-only,,current,true(1):false(2),The rule is active or not. true : active false : inactive 
.1.3.6.1.4.1.11.2.14.11.15.2.8.2.2.2.1.15,HPN-ICF-ACL-MIB::hpnicfAclIPAclBasicVpnInstanceName,OCTET,read-create,,current,,The VPN name, which the rule will be applied. Default value is null. 
.1.3.6.1.4.1.11.2.14.11.15.2.8.2.2.2.1.16,HPN-ICF-ACL-MIB::hpnicfAclIPAclBasicComment,OCTET,read-create,,current,,The description of ACL rule. Default value is Zero-length String. 
.1.3.6.1.4.1.11.2.14.11.15.2.8.2.2.2.1.17,HPN-ICF-ACL-MIB::hpnicfAclIPAclBasicCounting,INTEGER,read-create,,current,true(1):false(2),The packet will be counted when it matches the rule. It is disabled by default. 
.1.3.6.1.4.1.11.2.14.11.15.2.8.2.2.2.1.18,HPN-ICF-ACL-MIB::hpnicfAclIPAclBasicRouteTypeAny,INTEGER,read-create,,current,true(1):false(2),The flag of matching any type of routing header of IPv6 packet. 
.1.3.6.1.4.1.11.2.14.11.15.2.8.2.2.2.1.19,HPN-ICF-ACL-MIB::hpnicfAclIPAclBasicRouteTypeValue,Integer32,read-create,,current,,Match specify type of routing header of IPv6 packet.
.1.3.6.1.4.1.11.2.14.11.15.2.8.2.2.3,HPN-ICF-ACL-MIB::hpnicfAclIPAclAdvancedTable,,not-accessible,,current,,A table of advanced and simple acl group. If some objects of this table are not supported by some products, these objects can't be created, changed and applied. Default value of these objects will be returned when they are read. 
.1.3.6.1.4.1.11.2.14.11.15.2.8.2.2.3.1,HPN-ICF-ACL-MIB::hpnicfAclIPAclAdvancedEntry,,not-accessible,hpnicfAclNumberGroupType:hpnicfAclNumberGroupIndex:hpnicfAclIPAclAdvancedRuleIndex,current,,Advanced acl group information.
.1.3.6.1.4.1.11.2.14.11.15.2.8.2.2.3.1.1,HPN-ICF-ACL-MIB::hpnicfAclIPAclAdvancedRuleIndex,Integer32,not-accessible,,current,,The rule index of advanced acl group. As a Simple ACL group, the value of this object must be 0. As an Advanced ACL group, the value of this object is ranging from 0 to 65534. 
.1.3.6.1.4.1.11.2.14.11.15.2.8.2.2.3.1.2,HPN-ICF-ACL-MIB::hpnicfAclIPAclAdvancedRowStatus,INTEGER,read-create,,current,active(1):notInService(2):notReady(3):createAndGo(4):createAndWait(5):destroy(6),RowStatus.
.1.3.6.1.4.1.11.2.14.11.15.2.8.2.2.3.1.3,HPN-ICF-ACL-MIB::hpnicfAclIPAclAdvancedAct,INTEGER,read-create,,current,invalid(1):permit(2):deny(3),The action of advanced acl rule.
.1.3.6.1.4.1.11.2.14.11.15.2.8.2.2.3.1.4,HPN-ICF-ACL-MIB::hpnicfAclIPAclAdvancedProtocol,Integer32,read-create,,current,,The protocol-type of advanced acl group. <1-255> Protocol number gre GRE tunneling(47) icmp Internet Control Message Protocol(1) icmpv6 Internet Control Message Protocol6(58) igmp Internet Group Management Protocol(2) ip Any IPv4 protocol ipv6 Any IPv6 protocol ipinip IP in IP tunneling(4) ospf OSPF routing protocol(89) tcp Transmission Control Protocol (6) udp User Datagram Protocol (17) ipv6-ah IPv6 Authentication Header(51) ipv6-esp IPv6 Encapsulating Security Payload(50) 
.1.3.6.1.4.1.11.2.14.11.15.2.8.2.2.3.1.5,HPN-ICF-ACL-MIB::hpnicfAclIPAclAdvancedAddrFlag,INTEGER,read-create,,current,invalid(0):t64SrcAddrPre64DestAddrPre(1):t64SrcAddrPre64DestAddrSuf(2):t64SrcAddrSuf64DestAddrPre(3):t64SrcAddrSuf64DestAddrSuf(4):t128SourceAddress(5):t128DestinationAddress(6),Address flag to select address.
.1.3.6.1.4.1.11.2.14.11.15.2.8.2.2.3.1.6,HPN-ICF-ACL-MIB::hpnicfAclIPAclAdvancedSrcAddrType,INTEGER,read-create,,current,unknown(0):ipv4(1):ipv6(2):ipv4z(3):ipv6z(4):dns(16),The IP addresses type of IP pool.
.1.3.6.1.4.1.11.2.14.11.15.2.8.2.2.3.1.7,HPN-ICF-ACL-MIB::hpnicfAclIPAclAdvancedSrcAddr,OCTET,read-create,,current,,The value of a local IP address available for this association. The type of this address is determined by the value of hpnicfAclIPAclAdvancedSrcAddrType. 
.1.3.6.1.4.1.11.2.14.11.15.2.8.2.2.3.1.8,HPN-ICF-ACL-MIB::hpnicfAclIPAclAdvancedSrcPrefix,Unsigned32,read-create,,current,,Denotes the length of a generic Internet network address prefix. A value of n corresponds to an IP address mask which has n contiguous 1-bits from the most significant bit (MSB) and all other bits set to 0. 
.1.3.6.1.4.1.11.2.14.11.15.2.8.2.2.3.1.9,HPN-ICF-ACL-MIB::hpnicfAclIPAclAdvancedSrcAny,INTEGER,read-create,,current,true(1):false(2),The flag of matching any IP address.
.1.3.6.1.4.1.11.2.14.11.15.2.8.2.2.3.1.10,HPN-ICF-ACL-MIB::hpnicfAclIPAclAdvancedSrcWild,IpAddress,read-create,,current,,Source IPv4 address wild. Only IPv4 Advanced Rule supports this object. Default value is '0.0.0.0'. 
.1.3.6.1.4.1.11.2.14.11.15.2.8.2.2.3.1.11,HPN-ICF-ACL-MIB::hpnicfAclIPAclAdvancedSrcOp,INTEGER,read-create,,current,invalid(0):lt(1):eq(2):gt(3):neq(4):range(5),Source port operation symbol of advanced acl group.
.1.3.6.1.4.1.11.2.14.11.15.2.8.2.2.3.1.12,HPN-ICF-ACL-MIB::hpnicfAclIPAclAdvancedSrcPort1,Integer32,read-create,,current,,The fourth layer source port1.
.1.3.6.1.4.1.11.2.14.11.15.2.8.2.2.3.1.13,HPN-ICF-ACL-MIB::hpnicfAclIPAclAdvancedSrcPort2,Integer32,read-create,,current,,The fourth layer source port2.
.1.3.6.1.4.1.11.2.14.11.15.2.8.2.2.3.1.14,HPN-ICF-ACL-MIB::hpnicfAclIPAclAdvancedDestAddrType,INTEGER,read-create,,current,unknown(0):ipv4(1):ipv6(2):ipv4z(3):ipv6z(4):dns(16),The IP addresses type of IP pool.
.1.3.6.1.4.1.11.2.14.11.15.2.8.2.2.3.1.15,HPN-ICF-ACL-MIB::hpnicfAclIPAclAdvancedDestAddr,OCTET,read-create,,current,,The value of a local IP address available for this association. The type of this address is determined by the value of hpnicfAclIPAclAdvancedDestAddrType. 
.1.3.6.1.4.1.11.2.14.11.15.2.8.2.2.3.1.16,HPN-ICF-ACL-MIB::hpnicfAclIPAclAdvancedDestPrefix,Unsigned32,read-create,,current,,Denotes the length of a generic Internet network address prefix. A value of n corresponds to an IP address mask which has n contiguous 1-bits from the most significant bit (MSB) and all other bits set to 0. 
.1.3.6.1.4.1.11.2.14.11.15.2.8.2.2.3.1.17,HPN-ICF-ACL-MIB::hpnicfAclIPAclAdvancedDestAny,INTEGER,read-create,,current,true(1):false(2),The flag of matching any IP address.
.1.3.6.1.4.1.11.2.14.11.15.2.8.2.2.3.1.18,HPN-ICF-ACL-MIB::hpnicfAclIPAclAdvancedDestWild,IpAddress,read-create,,current,,Destination IPv4 address wild. Only IPv4 Advanced Rule supports this object. Default value is '0.0.0.0'. 
.1.3.6.1.4.1.11.2.14.11.15.2.8.2.2.3.1.19,HPN-ICF-ACL-MIB::hpnicfAclIPAclAdvancedDestOp,INTEGER,read-create,,current,invalid(0):lt(1):eq(2):gt(3):neq(4):range(5),Destination port operation symbol of advanced acl group.
.1.3.6.1.4.1.11.2.14.11.15.2.8.2.2.3.1.20,HPN-ICF-ACL-MIB::hpnicfAclIPAclAdvancedDestPort1,Integer32,read-create,,current,,The fourth layer destination port1.
.1.3.6.1.4.1.11.2.14.11.15.2.8.2.2.3.1.21,HPN-ICF-ACL-MIB::hpnicfAclIPAclAdvancedDestPort2,Integer32,read-create,,current,,The fourth layer destination port2.
.1.3.6.1.4.1.11.2.14.11.15.2.8.2.2.3.1.22,HPN-ICF-ACL-MIB::hpnicfAclIPAclAdvancedIcmpType,Integer32,read-create,,current,,The type of ICMP packet.
.1.3.6.1.4.1.11.2.14.11.15.2.8.2.2.3.1.23,HPN-ICF-ACL-MIB::hpnicfAclIPAclAdvancedIcmpCode,Integer32,read-create,,current,,The code of ICMP packet.
.1.3.6.1.4.1.11.2.14.11.15.2.8.2.2.3.1.24,HPN-ICF-ACL-MIB::hpnicfAclIPAclAdvancedPrecedence,Integer32,read-create,,current,,The value of IP-packet's precedence. <0-7> Value of precedence routine Specify routine precedence(0) priority Specify priority precedence(1) immediate Specify immediate precedence(2) flash Specify flash precedence(3) flash-override Specify flash-override precedence(4) critical Specify critical precedence(5) internet Specify internetwork control precedence(6) network Specify network control precedence(7) 
.1.3.6.1.4.1.11.2.14.11.15.2.8.2.2.3.1.25,HPN-ICF-ACL-MIB::hpnicfAclIPAclAdvancedTos,Integer32,read-create,,current,,The value of IP-packet's TOS. <0-15> Value of TOS(type of service) max-reliability Match packets with max reliable TOS(2) max-throughput Match packets with max throughput TOS(4) min-delay Match packets with min delay TOS(8) min-monetary-cost Match packets with min monetary cost TOS(1) normal Match packets with normal TOS(0) 
.1.3.6.1.4.1.11.2.14.11.15.2.8.2.2.3.1.26,HPN-ICF-ACL-MIB::hpnicfAclIPAclAdvancedDscp,Integer32,read-create,,current,,The value of DSCP of IP packet.
.1.3.6.1.4.1.11.2.14.11.15.2.8.2.2.3.1.27,HPN-ICF-ACL-MIB::hpnicfAclIPAclAdvancedTimeRangeName,OCTET,read-create,,current,,The Time-range of advanced acl rule. Default value is null. 
.1.3.6.1.4.1.11.2.14.11.15.2.8.2.2.3.1.28,HPN-ICF-ACL-MIB::hpnicfAclIPAclAdvancedTCPFlag,INTEGER,read-create,,current,invalid(0):tcpack(1):tcpfin(2):tcppsh(3):tcprst(4):tcpsyn(5):tcpurg(6),The packet type of TCP protocol.
.1.3.6.1.4.1.11.2.14.11.15.2.8.2.2.3.1.29,HPN-ICF-ACL-MIB::hpnicfAclIPAclAdvancedFragmentFlag,INTEGER,read-create,,current,invalid(0):fragment(1):fragmentSubseq(2):nonFragment(3):nonSubseq(4),The flag of matching fragmented packet, and now support two value: 0 or 2 .
.1.3.6.1.4.1.11.2.14.11.15.2.8.2.2.3.1.30,HPN-ICF-ACL-MIB::hpnicfAclIPAclAdvancedLog,INTEGER,read-create,,current,true(1):false(2),Log matched packets.
.1.3.6.1.4.1.11.2.14.11.15.2.8.2.2.3.1.31,HPN-ICF-ACL-MIB::hpnicfAclIPAclAdvancedCount,Unsigned32,read-only,,current,,The count of matched by the rule.
.1.3.6.1.4.1.11.2.14.11.15.2.8.2.2.3.1.32,HPN-ICF-ACL-MIB::hpnicfAclIPAclAdvancedCountClear,INTEGER,read-write,,current,cleared(1):nouse(2),Reset the value of counter.
.1.3.6.1.4.1.11.2.14.11.15.2.8.2.2.3.1.33,HPN-ICF-ACL-MIB::hpnicfAclIPAclAdvancedEnable,INTEGER,read-only,,current,true(1):false(2),The rule is active or not. true : active false : inactive 
.1.3.6.1.4.1.11.2.14.11.15.2.8.2.2.3.1.34,HPN-ICF-ACL-MIB::hpnicfAclIPAclAdvancedVpnInstanceName,OCTET,read-create,,current,,The VPN name that the rule will be applied. Default value is null. 
.1.3.6.1.4.1.11.2.14.11.15.2.8.2.2.3.1.35,HPN-ICF-ACL-MIB::hpnicfAclIPAclAdvancedComment,OCTET,read-create,,current,,The description of ACL rule. Default value is Zero-length String. 
.1.3.6.1.4.1.11.2.14.11.15.2.8.2.2.3.1.36,HPN-ICF-ACL-MIB::hpnicfAclIPAclAdvancedReflective,INTEGER,read-create,,current,true(1):false(2),The flag of reflective.
.1.3.6.1.4.1.11.2.14.11.15.2.8.2.2.3.1.37,HPN-ICF-ACL-MIB::hpnicfAclIPAclAdvancedCounting,INTEGER,read-create,,current,true(1):false(2),The packet will be counted when it matches the rule. It is disabled by default. 
.1.3.6.1.4.1.11.2.14.11.15.2.8.2.2.3.1.38,HPN-ICF-ACL-MIB::hpnicfAclIPAclAdvancedTCPFlagMask,BITS,read-create,,current,tcpack(0):tcpfin(1):tcppsh(2):tcprst(3):tcpsyn(4):tcpurg(5),The TCP Flag Mask. This is a bit-map of possible conditions. The various bit positions are: |0 |tcpack | |1 |tcpfin | |2 |tcppsh | |3 |tcprst | |4 |tcpsyn | |5 |tcpurg | 
.1.3.6.1.4.1.11.2.14.11.15.2.8.2.2.3.1.39,HPN-ICF-ACL-MIB::hpnicfAclIPAclAdvancedTCPFlagValue,BITS,read-create,,current,tcpack(0):tcpfin(1):tcppsh(2):tcprst(3):tcpsyn(4):tcpurg(5),The TCP Flag Value. This is a bit-map of possible conditions. The various bit positions are: |0 |tcpack | |1 |tcpfin | |2 |tcppsh | |3 |tcprst | |4 |tcpsyn | |5 |tcpurg | 
.1.3.6.1.4.1.11.2.14.11.15.2.8.2.2.3.1.40,HPN-ICF-ACL-MIB::hpnicfAclIPAclAdvancedRouteTypeAny,INTEGER,read-create,,current,true(1):false(2),The flag of matching any type of routing header of IPv6 packet. 
.1.3.6.1.4.1.11.2.14.11.15.2.8.2.2.3.1.41,HPN-ICF-ACL-MIB::hpnicfAclIPAclAdvancedRouteTypeValue,Integer32,read-create,,current,,The type of routing header of IPv6 packet.
.1.3.6.1.4.1.11.2.14.11.15.2.8.2.2.3.1.42,HPN-ICF-ACL-MIB::hpnicfAclIPAclAdvancedFlowLabel,Unsigned32,read-create,,current,,The value of flow label of IPv6 packet header.
.1.3.6.1.4.1.11.2.14.11.15.2.8.2.3,HPN-ICF-ACL-MIB::hpnicfAclMACAclGroup,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.2.8.2.3.1,HPN-ICF-ACL-MIB::hpnicfAclMACTable,,not-accessible,,current,,A table of MAC acl group. If some objects of this table are not supported by some products, these objects can't be created, changed and applied. Default value of these objects will be returned when they are read. 
.1.3.6.1.4.1.11.2.14.11.15.2.8.2.3.1.1,HPN-ICF-ACL-MIB::hpnicfAclMACEntry,,not-accessible,hpnicfAclNumberGroupType:hpnicfAclNumberGroupIndex:hpnicfAclMACRuleIndex,current,,MAC acl group information.
.1.3.6.1.4.1.11.2.14.11.15.2.8.2.3.1.1.1,HPN-ICF-ACL-MIB::hpnicfAclMACRuleIndex,Integer32,not-accessible,,current,,The rule index of MAC-based acl group.
.1.3.6.1.4.1.11.2.14.11.15.2.8.2.3.1.1.2,HPN-ICF-ACL-MIB::hpnicfAclMACRowStatus,INTEGER,read-create,,current,active(1):notInService(2):notReady(3):createAndGo(4):createAndWait(5):destroy(6),RowStatus.
.1.3.6.1.4.1.11.2.14.11.15.2.8.2.3.1.1.3,HPN-ICF-ACL-MIB::hpnicfAclMACAct,INTEGER,read-create,,current,invalid(1):permit(2):deny(3),The action of MAC acl rule.
.1.3.6.1.4.1.11.2.14.11.15.2.8.2.3.1.1.4,HPN-ICF-ACL-MIB::hpnicfAclMACTypeCode,OCTET,read-create,,current,,The type of protocol.
.1.3.6.1.4.1.11.2.14.11.15.2.8.2.3.1.1.5,HPN-ICF-ACL-MIB::hpnicfAclMACTypeMask,OCTET,read-create,,current,,The mask of protocol.
.1.3.6.1.4.1.11.2.14.11.15.2.8.2.3.1.1.6,HPN-ICF-ACL-MIB::hpnicfAclMACSrcMac,OCTET,read-create,,current,,Source MAC of MAC acl rule. Default value is '00:00:00:00:00:00'. 
.1.3.6.1.4.1.11.2.14.11.15.2.8.2.3.1.1.7,HPN-ICF-ACL-MIB::hpnicfAclMACSrcMacWild,OCTET,read-create,,current,,Source MAC wildzard of MAC acl rule. Default value is '00:00:00:00:00:00'. 
.1.3.6.1.4.1.11.2.14.11.15.2.8.2.3.1.1.8,HPN-ICF-ACL-MIB::hpnicfAclMACDestMac,OCTET,read-create,,current,,Destination MAC of MAC acl rule. Default value is '00:00:00:00:00:00'. 
.1.3.6.1.4.1.11.2.14.11.15.2.8.2.3.1.1.9,HPN-ICF-ACL-MIB::hpnicfAclMACDestMacWild,OCTET,read-create,,current,,Destination MAC wildzard of MAC acl rule. Default value is '00:00:00:00:00:00' 
.1.3.6.1.4.1.11.2.14.11.15.2.8.2.3.1.1.10,HPN-ICF-ACL-MIB::hpnicfAclMACLsapCode,OCTET,read-create,,current,,The type of LSAP.
.1.3.6.1.4.1.11.2.14.11.15.2.8.2.3.1.1.11,HPN-ICF-ACL-MIB::hpnicfAclMACLsapMask,OCTET,read-create,,current,,The mask of LSAP.
.1.3.6.1.4.1.11.2.14.11.15.2.8.2.3.1.1.12,HPN-ICF-ACL-MIB::hpnicfAclMACCos,Integer32,read-create,,current,,Vlan priority of MAC acl rule.
.1.3.6.1.4.1.11.2.14.11.15.2.8.2.3.1.1.13,HPN-ICF-ACL-MIB::hpnicfAclMACTimeRangeName,OCTET,read-create,,current,,The Time-range of MAC acl rule. Default value is null. 
.1.3.6.1.4.1.11.2.14.11.15.2.8.2.3.1.1.14,HPN-ICF-ACL-MIB::hpnicfAclMACCount,Unsigned32,read-only,,current,,The count of matched frame by the rule.
.1.3.6.1.4.1.11.2.14.11.15.2.8.2.3.1.1.15,HPN-ICF-ACL-MIB::hpnicfAclMACCountClear,INTEGER,read-write,,current,cleared(1):nouse(2),Reset the value of counter.
.1.3.6.1.4.1.11.2.14.11.15.2.8.2.3.1.1.16,HPN-ICF-ACL-MIB::hpnicfAclMACEnable,INTEGER,read-only,,current,true(1):false(2),The rule is active or not. true : active false : inactive 
.1.3.6.1.4.1.11.2.14.11.15.2.8.2.3.1.1.17,HPN-ICF-ACL-MIB::hpnicfAclMACComment,OCTET,read-create,,current,,The description of ACL rule. Default value is Zero-length String. 
.1.3.6.1.4.1.11.2.14.11.15.2.8.2.3.1.1.18,HPN-ICF-ACL-MIB::hpnicfAclMACLog,INTEGER,read-create,,current,true(1):false(2),The packet will be logged when it matches the rule. It is disabled by default. 
.1.3.6.1.4.1.11.2.14.11.15.2.8.2.3.1.1.19,HPN-ICF-ACL-MIB::hpnicfAclMACCounting,INTEGER,read-create,,current,true(1):false(2),The packet will be counted when it matches the rule. It is disabled by default. 
.1.3.6.1.4.1.11.2.14.11.15.2.8.2.4,HPN-ICF-ACL-MIB::hpnicfAclEnUserAclGroup,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.2.8.2.4.3,HPN-ICF-ACL-MIB::hpnicfAclEnUserTable,,not-accessible,,current,,A table of user acl group information. If some objects of this table are not supported by some products, these objects can't be created, changed and applied. Default value of these objects will be returned when they are read. 
.1.3.6.1.4.1.11.2.14.11.15.2.8.2.4.3.1,HPN-ICF-ACL-MIB::hpnicfAclEnUserEntry,,not-accessible,hpnicfAclNumberGroupType:hpnicfAclNumberGroupIndex:hpnicfAclEnUserRuleIndex,current,,User defined acl group entry.
.1.3.6.1.4.1.11.2.14.11.15.2.8.2.4.3.1.1,HPN-ICF-ACL-MIB::hpnicfAclEnUserRuleIndex,Integer32,not-accessible,,current,,The subitem of the user acl.
.1.3.6.1.4.1.11.2.14.11.15.2.8.2.4.3.1.2,HPN-ICF-ACL-MIB::hpnicfAclEnUserRowStatus,INTEGER,read-create,,current,active(1):notInService(2):notReady(3):createAndGo(4):createAndWait(5):destroy(6),RowStatus.
.1.3.6.1.4.1.11.2.14.11.15.2.8.2.4.3.1.3,HPN-ICF-ACL-MIB::hpnicfAclEnUserAct,INTEGER,read-create,,current,invalid(1):permit(2):deny(3),The action of user defined acl rule.
.1.3.6.1.4.1.11.2.14.11.15.2.8.2.4.3.1.4,HPN-ICF-ACL-MIB::hpnicfAclEnUserStartString,OCTET,read-create,,current,,The rule, matching packets, input like this: 'RuleOffset','RuleString','RuleMask'. RuleOffset: The value of this object is defined by product and it indicates the offset of the rule mask in the packet(unit: byte). RuleString: The length of RuleString is defined by product. The string must be hexadecimal. The length of string must be multiple of 2. RuleMask: The length of RuleMask is defined by product. The string must be hexadecimal. The length of string must be multiple of 2. For example: 10,10af,ffff. Default value is null. 
.1.3.6.1.4.1.11.2.14.11.15.2.8.2.4.3.1.5,HPN-ICF-ACL-MIB::hpnicfAclEnUserL2String,OCTET,read-create,,current,,The rule, matching layer 2 packets, input like this: 'RuleOffset','RuleString','RuleMask'. RuleOffset: The value is defined by product and it indicates offset of the rule mask in the packet(unit: byte). RuleString: The length of RuleString is defined by product. The string must be hexadecimal. The length of string must be multiple of 2. RuleMask: The length of RuleMask is defined by product. The string must be hexadecimal. The length of string must be multiple of 2. For example: '10','10af','ffff'. Default value is null. 
.1.3.6.1.4.1.11.2.14.11.15.2.8.2.4.3.1.6,HPN-ICF-ACL-MIB::hpnicfAclEnUserMplsString,OCTET,read-create,,current,,The rule, matching mpls packets, input like this: 'RuleOffset','RuleString','RuleMask'. RuleOffset: The value is defined by product and it indicates offset of the rule mask in the packet(unit: byte). RuleString: The length of RuleString is defined by product. The string must be hexadecimal. The length of string must be multiple of 2. RuleMask: The length of RuleMask is defined by product. The string must be hexadecimal. The length of string must be multiple of 2. For example: '10','10af','ffff'. Default value is null. 
.1.3.6.1.4.1.11.2.14.11.15.2.8.2.4.3.1.7,HPN-ICF-ACL-MIB::hpnicfAclEnUserIPv4String,OCTET,read-create,,current,,The rule, matching IPv4 packets, input like this: 'RuleOffset','RuleString','RuleMask'. RuleOffset: The value is defined by product and it indicates offset of the rule mask in the packet(unit: byte). RuleString: The length of RuleString is defined by product. The string must be hexadecimal. The length of string must be multiple of 2. RuleMask: The length of RuleMask is defined by product. The string must be hexadecimal. The length of string must be multiple of 2. For example: '10','10af','ffff'. Default value is null. 
.1.3.6.1.4.1.11.2.14.11.15.2.8.2.4.3.1.8,HPN-ICF-ACL-MIB::hpnicfAclEnUserIPv6String,OCTET,read-create,,current,,The rule, matching IPv6 packets, input like this: 'RuleOffset','RuleString','RuleMask'. RuleOffset: The value is defined by product and it indicates offset of the rule mask in the packet(unit: byte). RuleString: The length of RuleString is defined by product. The string must be hexadecimal. The length of string must be multiple of 2. RuleMask: The length of RuleMask is defined by product. The string must be hexadecimal. The length of string must be multiple of 2. For example: '10','10af','ffff'. Default value is null. 
.1.3.6.1.4.1.11.2.14.11.15.2.8.2.4.3.1.9,HPN-ICF-ACL-MIB::hpnicfAclEnUserL4String,OCTET,read-create,,current,,The rule, matching layer 4 packets, input like this: 'RuleOffset','RuleString','RuleMask'. RuleOffset: The value is defined by product and it indicates offset of the rule mask in the packet(unit: byte). RuleString: The length of RuleString is defined by product. The string must be hexadecimal. The length of string must be multiple of 2. RuleMask: The length of RuleMask is defined by product. The string must be hexadecimal. The length of string must be multiple of 2. For example: '10','10af','ffff'. Default value is null. 
.1.3.6.1.4.1.11.2.14.11.15.2.8.2.4.3.1.10,HPN-ICF-ACL-MIB::hpnicfAclEnUserL5String,OCTET,read-create,,current,,The rule, matching layer 5 packets, input like this: 'RuleOffset','RuleString','RuleMask'. RuleOffset: The value is defined by product and it indicates offset of the rule mask in the packet(unit: byte). RuleString: The length of RuleString is defined by product. The string must be hexadecimal. The length of string must be multiple of 2. RuleMask: The length of RuleMask is defined by product. The string must be hexadecimal. The length of string must be multiple of 2. For example: '10','10af','ffff'. Default value is null. 
.1.3.6.1.4.1.11.2.14.11.15.2.8.2.4.3.1.11,HPN-ICF-ACL-MIB::hpnicfAclEnUserTimeRangeName,OCTET,read-create,,current,,The Time-range of user acl rule. Default value is null.
.1.3.6.1.4.1.11.2.14.11.15.2.8.2.4.3.1.12,HPN-ICF-ACL-MIB::hpnicfAclEnUserCount,Unsigned32,read-only,,current,,The count of matched by the rule.
.1.3.6.1.4.1.11.2.14.11.15.2.8.2.4.3.1.13,HPN-ICF-ACL-MIB::hpnicfAclEnUserCountClear,INTEGER,read-write,,current,cleared(1):nouse(2),Reset the value of counter.
.1.3.6.1.4.1.11.2.14.11.15.2.8.2.4.3.1.14,HPN-ICF-ACL-MIB::hpnicfAclEnUserEnable,INTEGER,read-only,,current,true(1):false(2),The rule is active or not. true : active false : inactive 
.1.3.6.1.4.1.11.2.14.11.15.2.8.2.4.3.1.15,HPN-ICF-ACL-MIB::hpnicfAclEnUserComment,OCTET,read-create,,current,,The description of ACL rule. Default value is Zero-length String. 
.1.3.6.1.4.1.11.2.14.11.15.2.8.2.4.3.1.16,HPN-ICF-ACL-MIB::hpnicfAclEnUserLog,INTEGER,read-create,,current,true(1):false(2),The packet will be logged when it matches the rule. It is disabled by default. 
.1.3.6.1.4.1.11.2.14.11.15.2.8.2.4.3.1.17,HPN-ICF-ACL-MIB::hpnicfAclEnUserCounting,INTEGER,read-create,,current,true(1):false(2),The packet will be counted when it matches the rule. It is disabled by default. 
.1.3.6.1.4.1.11.2.14.11.15.2.8.2.5,HPN-ICF-ACL-MIB::hpnicfAclResourceGroup,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.2.8.2.5.1,HPN-ICF-ACL-MIB::hpnicfAclResourceUsageTable,,not-accessible,,current,,The table shows ACL resource usage information. Support for resource types that are denoted by hpnicfAclResourceType object varies with products. If a type is not supported, the corresponding row for the type will not be instantiated in this table. 
.1.3.6.1.4.1.11.2.14.11.15.2.8.2.5.1.1,HPN-ICF-ACL-MIB::hpnicfAclResourceUsageEntry,,not-accessible,hpnicfAclResourceChassis:hpnicfAclResourceSlot:hpnicfAclResourceChip:hpnicfAclResourceType,current,,Each row contains a brief description of the resource type, a port range associated with the chip, total, reserved, and configured amount of resource of this type, the percent of resource that has been allocated, and so on. 
.1.3.6.1.4.1.11.2.14.11.15.2.8.2.5.1.1.1,HPN-ICF-ACL-MIB::hpnicfAclResourceChassis,Unsigned32,not-accessible,,current,,The chassis number. On a centralized or distributed device, the value for this node is always zero. 
.1.3.6.1.4.1.11.2.14.11.15.2.8.2.5.1.1.2,HPN-ICF-ACL-MIB::hpnicfAclResourceSlot,Unsigned32,not-accessible,,current,,The slot number. On a centralized device, the value for this node is always zero.
.1.3.6.1.4.1.11.2.14.11.15.2.8.2.5.1.1.3,HPN-ICF-ACL-MIB::hpnicfAclResourceChip,Unsigned32,not-accessible,,current,,The chip number. On a single chip device, the value for this node is always zero.
.1.3.6.1.4.1.11.2.14.11.15.2.8.2.5.1.1.4,HPN-ICF-ACL-MIB::hpnicfAclResourceType,Integer32,not-accessible,,current,,The resource type.
.1.3.6.1.4.1.11.2.14.11.15.2.8.2.5.1.1.5,HPN-ICF-ACL-MIB::hpnicfAclPortRange,OCTET,read-only,,current,,The port range associated with the chip. Commas are used to separate multiple port ranges, for example, Ethernet1/2 to Ethernet1/12, Ethernet1/31 to Ethernet1/48. 
.1.3.6.1.4.1.11.2.14.11.15.2.8.2.5.1.1.6,HPN-ICF-ACL-MIB::hpnicfAclResourceTotal,Unsigned32,read-only,,current,,Total TCAM entries of the resource type.
.1.3.6.1.4.1.11.2.14.11.15.2.8.2.5.1.1.7,HPN-ICF-ACL-MIB::hpnicfAclResourceReserved,Unsigned32,read-only,,current,,The amount of reserved TCAM entries of the resource type.
.1.3.6.1.4.1.11.2.14.11.15.2.8.2.5.1.1.8,HPN-ICF-ACL-MIB::hpnicfAclResourceConfigured,Unsigned32,read-only,,current,,The amount of configured TCAM entries of the resource type.
.1.3.6.1.4.1.11.2.14.11.15.2.8.2.5.1.1.9,HPN-ICF-ACL-MIB::hpnicfAclResourceUsagePercent,Unsigned32,read-only,,current,,The percent of TCAM entries that have been used for this resource type. 
.1.3.6.1.4.1.11.2.14.11.15.2.8.2.5.1.1.10,HPN-ICF-ACL-MIB::hpnicfAclResourceTypeDescription,OCTET,read-only,,current,,The description of this resource type.
.1.3.6.1.4.1.11.2.14.11.15.2.8.3,HPN-ICF-ACL-MIB::hpnicfAclPacketFilterObjects,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.2.8.3.1,HPN-ICF-ACL-MIB::hpnicfPfilterScalarGroup,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.2.8.3.1.1,HPN-ICF-ACL-MIB::hpnicfPfilterDefaultAction,INTEGER,read-write,,current,permit(1):deny(2),The default action of packet filter. By default, the packet filter permits packets that do not match any ACL rule to pass. 
.1.3.6.1.4.1.11.2.14.11.15.2.8.3.1.2,HPN-ICF-ACL-MIB::hpnicfPfilterProcessingStatus,INTEGER,read-only,,current,processing(1):done(2),This object shows the status of the system when applying packet filter. It is forbidden to set or read in hpnicfAclPacketFilterObjects MIB module when the value is processing. 
.1.3.6.1.4.1.11.2.14.11.15.2.8.3.2,HPN-ICF-ACL-MIB::hpnicfPfilterApplyTable,,not-accessible,,current,,A table of packet filter application. It's not supported to set default action on an entity, but supported to enable hardware count of default action on an entity. 
.1.3.6.1.4.1.11.2.14.11.15.2.8.3.2.1,HPN-ICF-ACL-MIB::hpnicfPfilterApplyEntry,,not-accessible,hpnicfPfilterApplyObjType:hpnicfPfilterApplyObjIndex:hpnicfPfilterApplyDirection:hpnicfPfilterApplyAclType:hpnicfPfilterApplyAclIndex,current,,Packet filter application information entry.
.1.3.6.1.4.1.11.2.14.11.15.2.8.3.2.1.1,HPN-ICF-ACL-MIB::hpnicfPfilterApplyObjType,INTEGER,not-accessible,,current,interface(1):vlan(2):global(3),The object type of packet filter application. interface: Apply an ACL to the interface to filter packets. vlan: Apply an ACL to the VLAN to filter packets. global: Apply an ACL globally to filter packets. 
.1.3.6.1.4.1.11.2.14.11.15.2.8.3.2.1.2,HPN-ICF-ACL-MIB::hpnicfPfilterApplyObjIndex,Integer32,not-accessible,,current,,The object ID of packet filter application. Interface: interface index, equal to ifIndex VLAN: VLAN ID, 1..4094 Global: 0 
.1.3.6.1.4.1.11.2.14.11.15.2.8.3.2.1.3,HPN-ICF-ACL-MIB::hpnicfPfilterApplyDirection,INTEGER,not-accessible,,current,inbound(1):outbound(2),The direction of packet filter application.
.1.3.6.1.4.1.11.2.14.11.15.2.8.3.2.1.4,HPN-ICF-ACL-MIB::hpnicfPfilterApplyAclType,INTEGER,not-accessible,,current,ipv4(1):ipv6(2):default(3),ACL Type: IPv4, IPv6, default action. Take default action as a special ACL group. 
.1.3.6.1.4.1.11.2.14.11.15.2.8.3.2.1.5,HPN-ICF-ACL-MIB::hpnicfPfilterApplyAclIndex,Integer32,not-accessible,,current,,The ACL group index. Basic type: 2000..2999 Advanced type: 3000..3999 MAC type: 4000..4999 User type: 5000..5999 Default action type: 0 
.1.3.6.1.4.1.11.2.14.11.15.2.8.3.2.1.6,HPN-ICF-ACL-MIB::hpnicfPfilterApplyHardCount,INTEGER,read-create,,current,true(1):false(2),Hardware count flag. true: enable hardware count false: disable hardware count 
.1.3.6.1.4.1.11.2.14.11.15.2.8.3.2.1.7,HPN-ICF-ACL-MIB::hpnicfPfilterApplySequence,Unsigned32,read-only,,current,,The configure sequence of packet filter application.
.1.3.6.1.4.1.11.2.14.11.15.2.8.3.2.1.8,HPN-ICF-ACL-MIB::hpnicfPfilterApplyCountClear,INTEGER,read-write,,current,cleared(1):nouse(2),Clear the value of counters.
.1.3.6.1.4.1.11.2.14.11.15.2.8.3.2.1.9,HPN-ICF-ACL-MIB::hpnicfPfilterApplyRowStatus,INTEGER,read-create,,current,active(1):notInService(2):notReady(3):createAndGo(4):createAndWait(5):destroy(6),RowStatus.
.1.3.6.1.4.1.11.2.14.11.15.2.8.3.3,HPN-ICF-ACL-MIB::hpnicfPfilterAclGroupRunInfoTable,,not-accessible,,current,,A table of group running information of ACLs for packet filtering. If hardware count function is not supported or not enabled to the packet filter application, the statistics entry will be zero. 
.1.3.6.1.4.1.11.2.14.11.15.2.8.3.3.1,HPN-ICF-ACL-MIB::hpnicfPfilterAclGroupRunInfoEntry,,not-accessible,hpnicfPfilterRunApplyObjType:hpnicfPfilterRunApplyObjIndex:hpnicfPfilterRunApplyDirection:hpnicfPfilterRunApplyAclType:hpnicfPfilterRunApplyAclIndex,current,,ACL group running information entry for packet filtering.
.1.3.6.1.4.1.11.2.14.11.15.2.8.3.3.1.1,HPN-ICF-ACL-MIB::hpnicfPfilterRunApplyObjType,INTEGER,not-accessible,,current,interface(1):vlan(2):global(3),The object type of packet filter application. interface: Apply an ACL to the interface to filter packets. vlan: Apply an ACL to the VLAN to filter packets. global: Apply an ACL globally to filter packets. 
.1.3.6.1.4.1.11.2.14.11.15.2.8.3.3.1.2,HPN-ICF-ACL-MIB::hpnicfPfilterRunApplyObjIndex,Integer32,not-accessible,,current,,The object ID of packet filter application. Interface: interface index, equal to ifIndex VLAN: VLAN ID, 1..4094 Global: 0 
.1.3.6.1.4.1.11.2.14.11.15.2.8.3.3.1.3,HPN-ICF-ACL-MIB::hpnicfPfilterRunApplyDirection,INTEGER,not-accessible,,current,inbound(1):outbound(2),The direction of packet filter application.
.1.3.6.1.4.1.11.2.14.11.15.2.8.3.3.1.4,HPN-ICF-ACL-MIB::hpnicfPfilterRunApplyAclType,INTEGER,not-accessible,,current,ipv4(1):ipv6(2):default(3),ACL Type: IPv4, IPv6, default action. Take default action as a special ACL group. 
.1.3.6.1.4.1.11.2.14.11.15.2.8.3.3.1.5,HPN-ICF-ACL-MIB::hpnicfPfilterRunApplyAclIndex,Integer32,not-accessible,,current,,The ACL group index. Basic type: 2000..2999 Advanced type: 3000..3999 MAC type: 4000..4999 User type: 5000..5999 MAC default action: 1 IPv4 default action: 2 IPv6 default action: 3 
.1.3.6.1.4.1.11.2.14.11.15.2.8.3.3.1.6,HPN-ICF-ACL-MIB::hpnicfPfilterAclGroupStatus,INTEGER,read-only,,current,success(1):failed(2):partialSuccess(3),The status of ACL group applied. success: ACL applied successfully on all slots failed: failed to apply ACL on all slots partialSuccess: failed to apply ACL on some slots 
.1.3.6.1.4.1.11.2.14.11.15.2.8.3.3.1.7,HPN-ICF-ACL-MIB::hpnicfPfilterAclGroupCountStatus,INTEGER,read-only,,current,success(1):failed(2):partialSuccess(3),The status of enabling hardware count. If hardware count is not enabled, it returns success. success: enable hardware count successfully on all slots failed: failed to enable hardware count on all slots partialSuccess: failed to enable hardware count on some slots 
.1.3.6.1.4.1.11.2.14.11.15.2.8.3.3.1.8,HPN-ICF-ACL-MIB::hpnicfPfilterAclGroupPermitPkts,Counter64,read-only,,current,,The number of packets permitted.
.1.3.6.1.4.1.11.2.14.11.15.2.8.3.3.1.9,HPN-ICF-ACL-MIB::hpnicfPfilterAclGroupPermitBytes,Counter64,read-only,,current,,The number of bytes permitted.
.1.3.6.1.4.1.11.2.14.11.15.2.8.3.3.1.10,HPN-ICF-ACL-MIB::hpnicfPfilterAclGroupDenyPkts,Counter64,read-only,,current,,The number of packets denied.
.1.3.6.1.4.1.11.2.14.11.15.2.8.3.3.1.11,HPN-ICF-ACL-MIB::hpnicfPfilterAclGroupDenyBytes,Counter64,read-only,,current,,The number of bytes denied.
.1.3.6.1.4.1.11.2.14.11.15.2.8.3.4,HPN-ICF-ACL-MIB::hpnicfPfilterAclRuleRunInfoTable,,not-accessible,,current,,A table of rule's running information of ACLs for packet filtering. If hardware count function is not supported or not enabled to the packet filter application, the hpnicfPfilterAclRuleMatchPackets and hpnicfPfilterAclRuleMatchBytes will be zero. 
.1.3.6.1.4.1.11.2.14.11.15.2.8.3.4.1,HPN-ICF-ACL-MIB::hpnicfPfilterAclRuleRunInfoEntry,,not-accessible,hpnicfPfilterRunApplyObjType:hpnicfPfilterRunApplyObjIndex:hpnicfPfilterRunApplyDirection:hpnicfPfilterRunApplyAclType:hpnicfPfilterRunApplyAclIndex:hpnicfPfilterAclRuleIndex,current,,ACL rule's running information entry.
.1.3.6.1.4.1.11.2.14.11.15.2.8.3.4.1.1,HPN-ICF-ACL-MIB::hpnicfPfilterAclRuleIndex,Integer32,not-accessible,,current,,The ACL rule index.
.1.3.6.1.4.1.11.2.14.11.15.2.8.3.4.1.2,HPN-ICF-ACL-MIB::hpnicfPfilterAclRuleStatus,INTEGER,read-only,,current,success(1):failed(2):partialSuccess(3),The status of rule application. success: rule applied successfully on all slots failed: failed to apply rule on all slots partialSuccess: failed to apply rule on some slots 
.1.3.6.1.4.1.11.2.14.11.15.2.8.3.4.1.3,HPN-ICF-ACL-MIB::hpnicfPfilterAclRuleCountStatus,INTEGER,read-only,,current,success(1):failed(2):partialSuccess(3),The status of enabling rule's hardware count. If hardware count is not enabled, it returns success. success: enable hardware count successfully on all slots failed: failed to enable hardware count on all slots partialSuccess: failed to enable hardware count on some slots 
.1.3.6.1.4.1.11.2.14.11.15.2.8.3.4.1.4,HPN-ICF-ACL-MIB::hpnicfPfilterAclRuleMatchPackets,Counter64,read-only,,current,,The number of packets matched.
.1.3.6.1.4.1.11.2.14.11.15.2.8.3.4.1.5,HPN-ICF-ACL-MIB::hpnicfPfilterAclRuleMatchBytes,Counter64,read-only,,current,,The number of bytes matched.
.1.3.6.1.4.1.11.2.14.11.15.2.8.3.5,HPN-ICF-ACL-MIB::hpnicfPfilterStatisticSumTable,,not-accessible,,current,,A table of ACL rule's sum statistics information, accumulated by all entity application on all slots. 
.1.3.6.1.4.1.11.2.14.11.15.2.8.3.5.1,HPN-ICF-ACL-MIB::hpnicfPfilterStatisticSumEntry,,not-accessible,hpnicfPfilterSumDirection:hpnicfPfilterSumAclType:hpnicfPfilterSumAclIndex:hpnicfPfilterSumRuleIndex,current,,ACL rule's sum statistics information entry.
.1.3.6.1.4.1.11.2.14.11.15.2.8.3.5.1.1,HPN-ICF-ACL-MIB::hpnicfPfilterSumDirection,INTEGER,not-accessible,,current,inbound(1):outbound(2),The direction of application.
.1.3.6.1.4.1.11.2.14.11.15.2.8.3.5.1.2,HPN-ICF-ACL-MIB::hpnicfPfilterSumAclType,INTEGER,not-accessible,,current,ipv4(1):ipv6(2),ACL type, IPv4 or IPv6.
.1.3.6.1.4.1.11.2.14.11.15.2.8.3.5.1.3,HPN-ICF-ACL-MIB::hpnicfPfilterSumAclIndex,Integer32,not-accessible,,current,,The ACL group index. Basic type: 2000..2999 Advanced type: 3000..3999 MAC type: 4000..4999 User type: 5000..5999 
.1.3.6.1.4.1.11.2.14.11.15.2.8.3.5.1.4,HPN-ICF-ACL-MIB::hpnicfPfilterSumRuleIndex,Integer32,not-accessible,,current,,The ACL rule index.
.1.3.6.1.4.1.11.2.14.11.15.2.8.3.5.1.5,HPN-ICF-ACL-MIB::hpnicfPfilterSumRuleMatchPackets,Counter64,read-only,,current,,The sum number of packets matched the ACL rule.
.1.3.6.1.4.1.11.2.14.11.15.2.8.3.5.1.6,HPN-ICF-ACL-MIB::hpnicfPfilterSumRuleMatchBytes,Counter64,read-only,,current,,The sum number of bytes matched the ACL rule.
.1.3.6.1.4.1.11.2.14.11.15.2.8.4,HPN-ICF-ACL-MIB::hpnicfAclPacketfilterTrapObjects,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.2.8.4.1,HPN-ICF-ACL-MIB::hpnicfPfilterInterface,OCTET,accessible-for-notify,,current,,The interface which policy apply.
.1.3.6.1.4.1.11.2.14.11.15.2.8.4.2,HPN-ICF-ACL-MIB::hpnicfPfilterDirection,OCTET,accessible-for-notify,,current,,Inbound or outbound.
.1.3.6.1.4.1.11.2.14.11.15.2.8.4.3,HPN-ICF-ACL-MIB::hpnicfPfilterACLNumber,Integer32,accessible-for-notify,,current,,ACL number.
.1.3.6.1.4.1.11.2.14.11.15.2.8.4.4,HPN-ICF-ACL-MIB::hpnicfPfilterAction,OCTET,accessible-for-notify,,current,,Permit or deny.
.1.3.6.1.4.1.11.2.14.11.15.2.8.4.5,HPN-ICF-ACL-MIB::hpnicfMACfilterSourceMac,OCTET,accessible-for-notify,,current,,Source MAC address.
.1.3.6.1.4.1.11.2.14.11.15.2.8.4.6,HPN-ICF-ACL-MIB::hpnicfMACfilterDestinationMac,OCTET,accessible-for-notify,,current,,Destination MAC address.
.1.3.6.1.4.1.11.2.14.11.15.2.8.4.7,HPN-ICF-ACL-MIB::hpnicfPfilterPacketNumber,Integer32,accessible-for-notify,,current,,The number of packets permitted or denied by ACL.
.1.3.6.1.4.1.11.2.14.11.15.2.8.4.8,HPN-ICF-ACL-MIB::hpnicfPfilterReceiveInterface,OCTET,accessible-for-notify,,current,,The interface where packet come from.
.1.3.6.1.4.1.11.2.14.11.15.2.8.5,HPN-ICF-ACL-MIB::hpnicfAclPacketfilterTrap,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.2.8.5.0,HPN-ICF-ACL-MIB::hpnicfPfilterTrapPrefix,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.2.8.5.0.1,HPN-ICF-ACL-MIB::hpnicfMACfilterTrap,,,,,,This notification is generated when a packet was processed by MAC address filter, but not every packet will generate one notification, the same notification only generate once in 30 seconds.
.1.3.6.1.4.1.11.2.14.11.15.2.9,HPN-ICF-OID-MIB::hpnicfVoiceVlan,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.2.9.1,HPN-ICF-VOICE-VLAN-MIB::hpnicfvoiceVlanOuiTable,,not-accessible,,current,, A table containing the mac address which can be identified by voice vlan 
.1.3.6.1.4.1.11.2.14.11.15.2.9.1.1,HPN-ICF-VOICE-VLAN-MIB::hpnicfvoiceVlanOuiEntry,,not-accessible,hpnicfVoiceVlanOuiAddress,current,, A table containing the mac address which can be identified by voice vlan 
.1.3.6.1.4.1.11.2.14.11.15.2.9.1.1.1,HPN-ICF-VOICE-VLAN-MIB::hpnicfVoiceVlanOuiAddress,OCTET,read-only,,current,, Mac address can be identified by voice vlan 
.1.3.6.1.4.1.11.2.14.11.15.2.9.1.1.2,HPN-ICF-VOICE-VLAN-MIB::hpnicfVoiceVlanOuiMask,OCTET,read-write,,current,, The mask of mac address 
.1.3.6.1.4.1.11.2.14.11.15.2.9.1.1.3,HPN-ICF-VOICE-VLAN-MIB::hpnicfVoiceVlanOuiDescription,OCTET,read-write,,current,, The description of oui 
.1.3.6.1.4.1.11.2.14.11.15.2.9.1.1.4,HPN-ICF-VOICE-VLAN-MIB::hpnicfVoiceVlanOuiRowStatus,INTEGER,read-create,,current,active(1):notInService(2):notReady(3):createAndGo(4):createAndWait(5):destroy(6), Current operation status of the row 
.1.3.6.1.4.1.11.2.14.11.15.2.9.2,HPN-ICF-VOICE-VLAN-MIB::hpnicfVoiceVlanEnabledId,INTEGER,read-write,,current,, Voice vlan enable status: enabled (2..4095), disabled (0xffffffff) 
.1.3.6.1.4.1.11.2.14.11.15.2.9.3,HPN-ICF-VOICE-VLAN-MIB::hpnicfVoiceVlanPortEnableList,OCTET,read-write,,current,, Portlist of voice vlan enabled ports 
.1.3.6.1.4.1.11.2.14.11.15.2.9.4,HPN-ICF-VOICE-VLAN-MIB::hpnicfVoiceVlanAgingTime,INTEGER,read-write,,current,, Voice vlan aging time, the unit of which is minute
.1.3.6.1.4.1.11.2.14.11.15.2.9.5,HPN-ICF-VOICE-VLAN-MIB::hpnicfVoiceVlanConfigState,INTEGER,read-write,,current,auto(1):manual(2), Voice vlan configuration mode status 
.1.3.6.1.4.1.11.2.14.11.15.2.9.6,HPN-ICF-VOICE-VLAN-MIB::hpnicfVoiceVlanSecurityState,INTEGER,read-write,,current,security(1):normal(2), Voice vlan security mode status 
.1.3.6.1.4.1.11.2.14.11.15.2.9.7,HPN-ICF-VOICE-VLAN-MIB::hpnicfvoiceVlanPortTable,,not-accessible,,current,, A list of voice vlan mode entries.
.1.3.6.1.4.1.11.2.14.11.15.2.9.7.1,HPN-ICF-VOICE-VLAN-MIB::hpnicfvoiceVlanPortEntry,,not-accessible,hpnicfVoiceVlanPortifIndex,current,, An entry containing voice vlan mode information, which is applicable to a voice vlan enabled interface.
.1.3.6.1.4.1.11.2.14.11.15.2.9.7.1.1,HPN-ICF-VOICE-VLAN-MIB::hpnicfVoiceVlanPortifIndex,Integer32,not-accessible,,current,, The index of interface on which voice vlan function is enabled.
.1.3.6.1.4.1.11.2.14.11.15.2.9.7.1.2,HPN-ICF-VOICE-VLAN-MIB::hpnicfVoiceVlanPortMode,INTEGER,read-write,,current,auto(1):manual(2), Voice vlan configuration mode status, which is applicable to a voice vlan enabled interface.
.1.3.6.1.4.1.11.2.14.11.15.2.9.7.1.3,HPN-ICF-VOICE-VLAN-MIB::hpnicfVoiceVlanPortLegacy,INTEGER,read-write,,current,true(1):false(2), Voice vlan configuration legacy status, which is applicable to a voice vlan enabled interface.
.1.3.6.1.4.1.11.2.14.11.15.2.9.7.1.4,HPN-ICF-VOICE-VLAN-MIB::hpnicfVoiceVlanPortQosTrust,INTEGER,read-write,,current,true(1):false(2), Voice vlan configuration qos trust status, which is applicable to a voice vlan enabled interface.
.1.3.6.1.4.1.11.2.14.11.15.2.10,HPN-ICF-OID-MIB::hpnicfL4Redirect,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.2.10.1,HPN-ICF-L4RDT-MIB::hpnicfL4RedirectCacheTable,,not-accessible,,current,,This table contains an entry for each Web Cache device that this unit is aware of.
.1.3.6.1.4.1.11.2.14.11.15.2.10.1.1,HPN-ICF-L4RDT-MIB::hpnicfL4RedirectCacheEntry,,not-accessible,hpnicfL4RedirectCacheIpAddress,current,,Each row specifies a known Web Cache device.
.1.3.6.1.4.1.11.2.14.11.15.2.10.1.1.1,HPN-ICF-L4RDT-MIB::hpnicfL4RedirectCacheIpAddress,IpAddress,not-accessible,,current,,This object specifies the IP address of the Web Cache device.
.1.3.6.1.4.1.11.2.14.11.15.2.10.1.1.2,HPN-ICF-L4RDT-MIB::hpnicfL4RedirectCacheRedirectionStatus,INTEGER,read-only,,current,disabledNotRedirecting(1):enabledNoHealthChecker(2):enabledHealthChecking(3):enabledHealthCheckOKNotRedirecting(4):enabledHealthCheckFailed(5):enabledRedirecting(6),This object returns the current state of traffic redirection to the cache. If redirection is disabled, this object shall return disabledNotRedirecting(1). If a unit cannot be selected to perform the cache health check, this object shall return enabledNoHealthChecker(2). If the software is determining if the cache is able to do redirection(this will happen when the redirection state transitions from disabled to enabled), this object shall return enabledHealthChecking(3). If the cache health check succeeded but the hardware is unable to support redirection to the cache port, this object shall return enabledHealthCheckOKNotRedirecting(4). If the latest health check of the cache has failed, this object shall return enabledHealthCheckFailed(5). If the cache is in use and traffic is being redirected to it, this object shall return enabledRedirecting(6). The default value is disabledNotRedirecting(1).
.1.3.6.1.4.1.11.2.14.11.15.2.10.1.1.3,HPN-ICF-L4RDT-MIB::hpnicfL4RedirectCachePort,INTEGER,read-create,,current,,This object stores the ifIndex that identifies the port or link aggregation which provides the connection that leads to the cache. If only manual cache configuration is supported, this value must be supplied. The method of cache configuration can be ascertained by the presence or absence of the L4 manual cache configuration id within the 3com-352 MIB. The default value is 0.
.1.3.6.1.4.1.11.2.14.11.15.2.10.1.1.4,HPN-ICF-L4RDT-MIB::hpnicfL4RedirectCacheRowStatus,INTEGER,read-create,,current,active(1):notInService(2):notReady(3):createAndGo(4):createAndWait(5):destroy(6),This object is used to create and remove Web Cache entries. The following are the valid values that may be written to RowStatus: Writing createAndGo(4) to the RowStatus of a non-existent row shall create a row with default values and shall set the row to active(1). If the row already exists, it shall be an error. Writing createAndWait(5) to the RowStatus of a non-existent row shall create a row with default values and shall set the row to notInService(2). If the row already exists, it shall be an error. Writing active(1) to the RowStatus of an existing row shall change the value of that row to active(1). Writing active(1) to the RowStatus of an existing row that is already active(1) shall not cause an error, the row shall remain active(1). If the row does not exist, it shall be an error. Writing notInService(2) to the RowStatus of an existing row shall change the value of that row to notInService(2). Writing notInService(2) to the RowStatus of an existing row that is already notInService(2) shall not cause an error, the row shall remain notInService(2). If the row does not exist, it shall be an error. Writing destroy(6) to the RowStatus of a non-existent row shall be an error. If the row exists, it shall be removed. Writing notReady(3) to the RowStatus of a non-existent row or to an existent row shall be an error. If the user does not supply values for the necessary objects, default values will be supplied. Attempts to create more entries than the hardware can support shall be rejected.
.1.3.6.1.4.1.11.2.14.11.15.2.10.1.1.5,HPN-ICF-L4RDT-MIB::hpnicfL4RedirectCacheMacAddress,OCTET,read-create,,current,,This object defines the MAC address of the attached Web cache device. If only manual configuration of the cache is supported, this value must be supplied. The method of cache configuration can be ascertained by the presence or absence of the L4 manual cache configuration id within the 3com-352 MIB. The default value is 0.
.1.3.6.1.4.1.11.2.14.11.15.2.10.1.1.6,HPN-ICF-L4RDT-MIB::hpnicfL4RedirectCacheVlan,INTEGER,read-create,,current,,This object specifies the VLAN which the cache port belongs to.
.1.3.6.1.4.1.11.2.14.11.15.2.10.1.1.7,HPN-ICF-L4RDT-MIB::hpnicfL4RedirectCacheTcpPort,INTEGER,read-create,,current,,This object specifies the TCP port number that is being redirected 
.1.3.6.1.4.1.11.2.14.11.15.2.10.2,HPN-ICF-L4RDT-MIB::hpnicfL4RedirectIpExclusionTable,,not-accessible,,current,,This table lists the IP addresses and subnetworks that Web Cache redirection is not supported for. Some devices may not support addition to this table.
.1.3.6.1.4.1.11.2.14.11.15.2.10.2.1,HPN-ICF-L4RDT-MIB::hpnicfL4RedirectIpExclusionEntry,,not-accessible,hpnicfL4RedirectIpExclusionIpAddress,current,,Each row contains an IP address or a IP subnetwork that is being excluded from the redirection.
.1.3.6.1.4.1.11.2.14.11.15.2.10.2.1.1,HPN-ICF-L4RDT-MIB::hpnicfL4RedirectIpExclusionIpAddress,IpAddress,not-accessible,,current,,This object specifies the IP address or the subnetwork address that is to be excluded.
.1.3.6.1.4.1.11.2.14.11.15.2.10.2.1.2,HPN-ICF-L4RDT-MIB::hpnicfL4RedirectIpExclusionMaskLen,INTEGER,read-create,,current,,This object provides the number of bits in the subnetwork mask. This mask shall be applied to the excludeIP address to determine the subnetwork that is to be excluded. A value of 32 implies that the excludeIP address refers to an individual host. The default value is 32.
.1.3.6.1.4.1.11.2.14.11.15.2.10.2.1.3,HPN-ICF-L4RDT-MIB::hpnicfL4RedirectIpExclusionRowStatus,INTEGER,read-create,,current,active(1):notInService(2):notReady(3):createAndGo(4):createAndWait(5):destroy(6),This object is used to add rows to the Exclusion Table. The following are the valid values that may be written to RowStatus: Writing createAndGo(4) to the RowStatus of a non-existent row shall create a new row. The new row shall be active(1). If the row exists, it shall be an error. Writing createAndWait(5) to the RowStatus of a non-existent row or to an existent row shall be an error. Writing active(1) to the RowStatus of an existing row shall change the value of that row to active(1). Writing active(1) to the RowStatus of an existing row that is already active(1) shall not cause an error, the row shall remain active(1). If the row does not exist, it shall be an error. Writing notInService(2) to the RowStatus of an existing row shall change the value of that row to notInService(2). Writing notInService(2) to the RowStatus of an existing row that is already notInService(2) shall not cause an error, the row shall remain notInService(2). If the row does not exist, it shall be an error. Writing destroy(6) to the RowStatus of a non-existent row shall be an error. If the row exists, it shall be removed. Writing notReady(3) to the RowStatus of a non-existent row or to an existent row shall be an error. Attempts to create more entries than the hardware can support shall be rejected.
.1.3.6.1.4.1.11.2.14.11.15.2.10.3,HPN-ICF-L4RDT-MIB::hpnicfL4RedirectVlanTable,,not-accessible,,current,,This table contains a row for each VLAN of the packet which need to be redirected to the Web cache.
.1.3.6.1.4.1.11.2.14.11.15.2.10.3.1,HPN-ICF-L4RDT-MIB::hpnicfL4RedirectVlanEntry,,not-accessible,hpnicfL4RedirectVlanID,current,,Each row specifies a VLAN of the packet which need to be redirected to the Web cache.
.1.3.6.1.4.1.11.2.14.11.15.2.10.3.1.1,HPN-ICF-L4RDT-MIB::hpnicfL4RedirectVlanID,INTEGER,not-accessible,,current,,This object specifies the VLAN ID of the packet which need to be redirected to the Web cache.
.1.3.6.1.4.1.11.2.14.11.15.2.10.3.1.2,HPN-ICF-L4RDT-MIB::hpnicfL4RedirectVlanRowStatus,INTEGER,read-create,,current,active(1):notInService(2):notReady(3):createAndGo(4):createAndWait(5):destroy(6),This object allows ports to be added and removed from the table. The following are the valid values that may be written to RowStatus: Writing createAndGo(4) to the RowStatus of a non-existent row shall create a new row. The new row shall be active(1). If the row exists, it shall be an error. Writing createAndWait(5) to the RowStatus of a non-existent row or to an existent row shall be an error. Writing active(1) to the RowStatus of an existing row shall change the value of that row to active(1). Writing active(1) to the RowStatus of an existing row that is already active(1) shall not cause an error, the row shall remain active(1). If the row does not exist, it shall be an error. Writing notInService(2) to the RowStatus of a non-existent row or to an existent row shall be an error. Writing destroy(6) to the RowStatus of a non-existent row shall be an error. If the row exists, it shall be removed. Writing notReady(3) to the RowStatus of a non-existent row or to an existent row shall be an error. Attempts to create more entries than the hardware can support shall be rejected.
.1.3.6.1.4.1.11.2.14.11.15.2.10.4,HPN-ICF-L4RDT-MIB::hpnicfL4RedirectInformationString,OCTET,read-only,,current,,This object shall contain the string generated as a result of a Layer 4 Redirection configuration. It shall contain either a string describing successful configuration or a string describing unsuccessful configuration. This length of this string shall be no longer than 80 characters.
.1.3.6.1.4.1.11.2.14.11.15.2.10.5,HPN-ICF-L4RDT-MIB::hpnicfL4RedirectFreeCacheEntries,INTEGER,read-only,,current,,This object indicates the number of entries that may still be added to the hpnicfL4RedirectCacheTable.
.1.3.6.1.4.1.11.2.14.11.15.2.10.6,HPN-ICF-L4RDT-MIB::hpnicfL4RedirectFreeIpExclusionEntries,INTEGER,read-only,,current,,This object indicates the number of entries that may still be added to the hpnicfL4RedirectIpExclusionTable.
.1.3.6.1.4.1.11.2.14.11.15.2.10.7,HPN-ICF-L4RDT-MIB::hpnicfL4RedirectFreeVlanEntries,INTEGER,read-only,,current,,This object indicates the number of entries that may still be added to the hpnicfL4RedirectVlanTable.
.1.3.6.1.4.1.11.2.14.11.15.2.11,HPN-ICF-OID-MIB::hpnicfIpPBX,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.2.12,HPN-ICF-OID-MIB::hpnicfUser,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.2.12.1,HPN-ICF-USER-MIB::hpnicfUserObjects,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.2.12.1.1,HPN-ICF-USER-MIB::hpnicfUserInfoTable,,not-accessible,,current,, Local User Info Table 
.1.3.6.1.4.1.11.2.14.11.15.2.12.1.1.1,HPN-ICF-USER-MIB::hpnicfUserInfoEntry,,not-accessible,hpnicfUserIndex,current,, The entry of hpnicfUserInfoTable 
.1.3.6.1.4.1.11.2.14.11.15.2.12.1.1.1.1,HPN-ICF-USER-MIB::hpnicfUserName,OCTET,read-create,,current,, The name of local user, it must be unique. 
.1.3.6.1.4.1.11.2.14.11.15.2.12.1.1.1.2,HPN-ICF-USER-MIB::hpnicfUserPassword,OCTET,read-create,,current,, The password of local user, default is null. When read, hpnicfUserPassword always returns an Octet String of length zero. 
.1.3.6.1.4.1.11.2.14.11.15.2.12.1.1.1.3,HPN-ICF-USER-MIB::hpnicfAuthMode,Integer32,read-create,,current,, The encrypting type of password: 0 : password simple, means password is entered in clean text and saved in cipher text. 1 : password hash simple, means password is entered in clean text and saved in hash value. 7 : password cipher, means password is entered and saved in cipher text. 8 : password hash cipher, means password is entered and saved in hash value. default is 0. 
.1.3.6.1.4.1.11.2.14.11.15.2.12.1.1.1.4,HPN-ICF-USER-MIB::hpnicfUserLevel,Integer32,read-create,,current,, The privilege of local user the value range is from 0 to 3, and 0 is minimum, 3 is maximum. default is 0. 
.1.3.6.1.4.1.11.2.14.11.15.2.12.1.1.1.5,HPN-ICF-USER-MIB::hpnicfUserState,INTEGER,read-create,,current,active(0):block(1), The state of local user 0: active, means local user can execute any operations that he has privilege to do. 1: block, means local user can not execute any operations. default is active. 
.1.3.6.1.4.1.11.2.14.11.15.2.12.1.1.1.6,HPN-ICF-USER-MIB::hpnicfUserInfoRowStatus,INTEGER,read-create,,current,active(1):notInService(2):notReady(3):createAndGo(4):createAndWait(5):destroy(6), The status of this conceptual row. Now only support CreateAndGo and Destroy and Active. 
.1.3.6.1.4.1.11.2.14.11.15.2.12.1.1.1.7,HPN-ICF-USER-MIB::hpnicfUserIndex,Integer32,not-accessible,,current,, The index of local user 
.1.3.6.1.4.1.11.2.14.11.15.2.12.1.2,HPN-ICF-USER-MIB::hpnicfUserAttributeTable,,not-accessible,,current,, Local User Attribute Table. if there are data in hpnicfUserInfoTable, this table should have the relevant data. this table only support query and modify, but not support create and delete operations. 
.1.3.6.1.4.1.11.2.14.11.15.2.12.1.2.1,HPN-ICF-USER-MIB::hpnicfUserAttributeEntry,,not-accessible,hpnicfUserIndex,current,,The entry of hpnicfUserAttributeTable 
.1.3.6.1.4.1.11.2.14.11.15.2.12.1.2.1.1,HPN-ICF-USER-MIB::hpnicfAccessLimit,Integer32,read-write,,current,, The maximum user number of current user who can access devices. default is 0, means no limit. 
.1.3.6.1.4.1.11.2.14.11.15.2.12.1.2.1.2,HPN-ICF-USER-MIB::hpnicfIdleCut,Integer32,read-write,,current,, Valid idle time out(second), default is 0, means disable idle time out. 
.1.3.6.1.4.1.11.2.14.11.15.2.12.1.2.1.3,HPN-ICF-USER-MIB::hpnicfIPAddress,IpAddress,read-write,,current,, Set local user's ip address. default is 0.0.0.0 
.1.3.6.1.4.1.11.2.14.11.15.2.12.1.2.1.4,HPN-ICF-USER-MIB::hpnicfNasIPAddress,IpAddress,read-write,,current,, Set local user's ip address of network access server. default is 127.0.0.1, means local machine. 
.1.3.6.1.4.1.11.2.14.11.15.2.12.1.2.1.5,HPN-ICF-USER-MIB::hpnicfSlotNum,Integer32,read-write,,current,, Set local user's slot. default is 0. 
.1.3.6.1.4.1.11.2.14.11.15.2.12.1.2.1.6,HPN-ICF-USER-MIB::hpnicfSubSlotNum,Integer32,read-write,,current,, Set local user's sub-slot. default is 0. 
.1.3.6.1.4.1.11.2.14.11.15.2.12.1.2.1.7,HPN-ICF-USER-MIB::hpnicfPortNum,Integer32,read-write,,current,, Set local user's port number. 0 is an insignificant value for initial status. 
.1.3.6.1.4.1.11.2.14.11.15.2.12.1.2.1.8,HPN-ICF-USER-MIB::hpnicfMacAddress,OCTET,read-write,,current,, Set local user's mac address. default is 0-0-0, means the local user do not bind any mac address. 
.1.3.6.1.4.1.11.2.14.11.15.2.12.1.2.1.9,HPN-ICF-USER-MIB::hpnicfVlan,Integer32,read-write,,current,, Set local user's vlan id. the value range is from 0 to 4094. default is 0, means the local user is not in any vlan. 
.1.3.6.1.4.1.11.2.14.11.15.2.12.1.2.1.10,HPN-ICF-USER-MIB::hpnicfFtpService,INTEGER,read-write,,current,enable(1):disable(2), FTP service: enable Setting this object to the value enable has the effect of enabling the FTP service for the corresponding entry in the hpnicfUserAttributeTable. disable Setting this object to the value disable has the effect of disabling the FTP service for the corresponding entry in the hpnicfUserAttributeTable. The default value is disable. 
.1.3.6.1.4.1.11.2.14.11.15.2.12.1.2.1.11,HPN-ICF-USER-MIB::hpnicfFtpDirectory,OCTET,read-write,,current,, Directory of FTP user. default is null, means if local user has the privilege of ftp service. 
.1.3.6.1.4.1.11.2.14.11.15.2.12.1.2.1.12,HPN-ICF-USER-MIB::hpnicfLanAccessService,INTEGER,read-write,,current,enable(1):disable(2), Lan Access service: enable Setting this object to the value enable has the effect of enabling the lan access service for the corresponding entry in the hpnicfUserAttributeTable. disable Setting this object to the value disable has the effect of disabling the lan access service for the corresponding entry in the hpnicfUserAttributeTable. The default value is disable. 
.1.3.6.1.4.1.11.2.14.11.15.2.12.1.2.1.13,HPN-ICF-USER-MIB::hpnicfSshService,INTEGER,read-write,,current,enable(1):disable(2), SSH service: enable Setting this object to the value enable has the effect of enabling the SSH service for the corresponding entry in the hpnicfUserAttributeTable. disable Setting this object to the value disable has the effect of disabling the SSH service for the corresponding entry in the hpnicfUserAttributeTable. The default value is disable. 
.1.3.6.1.4.1.11.2.14.11.15.2.12.1.2.1.14,HPN-ICF-USER-MIB::hpnicfTelnetService,INTEGER,read-write,,current,enable(1):disable(2), Telnet service: enable Setting this object to the value enable has the effect of enabling the TELNET service for the corresponding entry in the hpnicfUserAttributeTable. disable Setting this object to the value disable has the effect of disabling the TELNET service for the corresponding entry in the hpnicfUserAttributeTable. The default value is disable. 
.1.3.6.1.4.1.11.2.14.11.15.2.12.1.2.1.15,HPN-ICF-USER-MIB::hpnicfTerminalService,INTEGER,read-write,,current,enable(1):disable(2), Terminal service: enable Setting this object to the value enable has the effect of enabling the terminal service for the corresponding entry in the hpnicfUserAttributeTable. disable Setting this object to the value disable has the effect of disabling the terminal service for the corresponding entry in the hpnicfUserAttributeTable. The default value is disable. 
.1.3.6.1.4.1.11.2.14.11.15.2.12.1.2.1.16,HPN-ICF-USER-MIB::hpnicfExpirationDate,OCTET,read-write,,current,, Expired date of user. The default value is 0-0-0,0:0:0.0, and means it doesn't expire for ever. 
.1.3.6.1.4.1.11.2.14.11.15.2.12.1.2.1.17,HPN-ICF-USER-MIB::hpnicfUserGroup,OCTET,read-write,,current,, The user group that user belongs to. Any user must belong to a user group. The default group is the 'system' group. The maximum length of the group name is 80. 
.1.3.6.1.4.1.11.2.14.11.15.2.12.1.2.1.18,HPN-ICF-USER-MIB::hpnicfPortalService,INTEGER,read-write,,current,enable(1):disable(2), Portal service: enable Setting this object to the value enable has the effect of enabling the portal service for the corresponding entry in the hpnicfUserAttributeTable. disable Setting this object to the value disable has the effect of disabling the portal service for the corresponding entry in the hpnicfUserAttributeTable. The default value is disable. 
.1.3.6.1.4.1.11.2.14.11.15.2.12.1.2.1.19,HPN-ICF-USER-MIB::hpnicfPPPService,INTEGER,read-write,,current,enable(1):disable(2), PPP service: enable Setting this object to the value enable has the effect of enabling the PPP service for the corresponding entry in the hpnicfUserAttributeTable. disable Setting this object to the value disable has the effect of disabling the PPP service for the corresponding entry in the hpnicfUserAttributeTable. The default value is disable. 
.1.3.6.1.4.1.11.2.14.11.15.2.12.1.2.1.20,HPN-ICF-USER-MIB::hpnicfHttpService,INTEGER,read-write,,current,enable(1):disable(2), Http service: enable Setting this object to the value enable has the effect of enabling the Web service for the corresponding entry in the hpnicfUserAttributeTable. disable Setting this object to the value disable has the effect of disabling the Web service for the corresponding entry in the hpnicfUserAttributeTable. The default value is disable. 
.1.3.6.1.4.1.11.2.14.11.15.2.12.1.2.1.21,HPN-ICF-USER-MIB::hpnicfHttpsService,INTEGER,read-write,,current,enable(1):disable(2), Https service: enable Setting this object to the value enable has the effect of enabling the Web service for the corresponding entry in the hpnicfUserAttributeTable. disable Setting this object to the value disable has the effect of disabling the Web service for the corresponding entry in the hpnicfUserAttributeTable. The default value is disable. 
.1.3.6.1.4.1.11.2.14.11.15.2.12.1.2.1.22,HPN-ICF-USER-MIB::hpnicfUserIfIndex,Integer32,read-write,,current,, Set local user's interface index. A value of 0 means that the interface index has not been assigned or the interface assigned not exist. The default value is 0. 
.1.3.6.1.4.1.11.2.14.11.15.2.12.1.3,HPN-ICF-USER-MIB::hpnicfUserMaxNum,Integer32,read-only,,current,, This object contains the maximum number of local users. 
.1.3.6.1.4.1.11.2.14.11.15.2.12.1.4,HPN-ICF-USER-MIB::hpnicfUserCurrNum,Integer32,read-only,,current,, This object contains the current number of local users. 
.1.3.6.1.4.1.11.2.14.11.15.2.12.1.5,HPN-ICF-USER-MIB::hpnicfUserIndexIndicator,Integer32,read-only,,current,, This object contains an appropriate value to be used for hpnicfUserIndex when creating entries in the hpnicfUserInfoTable. The value 0 indicates that no unassigned entries are available. To obtain the hpnicfUserIndex value for a new entry, the manager issues a management protocol retrieval operation to obtain the current value of this object. After each retrieval, the agent should modify the value to the next unassigned index. After a manager retrieves a value the agent will determine through its local policy when this index value will be made available for reuse. 
.1.3.6.1.4.1.11.2.14.11.15.2.12.1.6,HPN-ICF-USER-MIB::hpnicfUserRoleTable,,not-accessible,,current,, Local User Role Table. If there is data in hpnicfUserInfoTable, this table should has the relevant data. 
.1.3.6.1.4.1.11.2.14.11.15.2.12.1.6.1,HPN-ICF-USER-MIB::hpnicfUserRoleEntry,,not-accessible,hpnicfUserIndex:hpnicfUserRole,current,,The entry of hpnicfUserRoleTable.
.1.3.6.1.4.1.11.2.14.11.15.2.12.1.6.1.1,HPN-ICF-USER-MIB::hpnicfUserRole,OCTET,not-accessible,,current,, The user's role determines the user's privilege. The user must be authorized one role at least. The default user role for a local user created by a network-admin user is network-operator, and the default user role for a local user created by an mdc-admin or level-15 user is mdc-operator. 
.1.3.6.1.4.1.11.2.14.11.15.2.12.1.6.1.2,HPN-ICF-USER-MIB::hpnicfUserRoleStatus,INTEGER,read-create,,current,active(1):notInService(2):notReady(3):createAndGo(4):createAndWait(5):destroy(6), This object is responsible for managing the creation, deletion and modification of rows, which support active status and CreateAndGo, Destroy operation. To create a new row, hpnicfUserIndex must be specified. The number of rows with same hpnicfUserIndex cann't be more than 64. If the the number of rows with a hpnicfUserIndex is 1, this row cann't be destroyed. 
.1.3.6.1.4.1.11.2.14.11.15.2.12.2,HPN-ICF-USER-MIB::hpnicfUserGroupObjects,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.2.12.2.1,HPN-ICF-USER-MIB::hpnicfUserGroupInfoTable,,not-accessible,,current,, User group information table. 
.1.3.6.1.4.1.11.2.14.11.15.2.12.2.1.1,HPN-ICF-USER-MIB::hpnicfUserGroupInfoEntry,,not-accessible,hpnicfUserGroupName,current,, The entry of hpnicfUserGroupInfoTable. 
.1.3.6.1.4.1.11.2.14.11.15.2.12.2.1.1.1,HPN-ICF-USER-MIB::hpnicfUserGroupName,OCTET,not-accessible,,current,, The index of user group. 
.1.3.6.1.4.1.11.2.14.11.15.2.12.2.1.1.2,HPN-ICF-USER-MIB::hpnicfUserGroupInfoRowStatus,INTEGER,read-create,,current,active(1):notInService(2):notReady(3):createAndGo(4):createAndWait(5):destroy(6), The status of this conceptual row. Only support createAndGo, destroy and active. 
.1.3.6.1.4.1.11.2.14.11.15.2.13,HPN-ICF-OID-MIB::hpnicfRadius,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.2.13.1,HPN-ICF-RADIUS-MIB::hpnicfRdObjects,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.2.13.1.1,HPN-ICF-RADIUS-MIB::hpnicfRdInfoTable,,not-accessible,,current,,The (conceptual) table listing RADIUS authentication servers.
.1.3.6.1.4.1.11.2.14.11.15.2.13.1.1.1,HPN-ICF-RADIUS-MIB::hpnicfRdInfoEntry,,not-accessible,hpnicfRdGroupName,current,,An entry (conceptual row) representing a RADIUS authentication server.
.1.3.6.1.4.1.11.2.14.11.15.2.13.1.1.1.1,HPN-ICF-RADIUS-MIB::hpnicfRdGroupName,OCTET,not-accessible,,current,,The name of the RADIUS authentication group referred to in this table entry.
.1.3.6.1.4.1.11.2.14.11.15.2.13.1.1.1.2,HPN-ICF-RADIUS-MIB::hpnicfRdPrimAuthIp,IpAddress,read-create,,deprecated,,The IP address of primary RADIUS authentication server.
.1.3.6.1.4.1.11.2.14.11.15.2.13.1.1.1.3,HPN-ICF-RADIUS-MIB::hpnicfRdPrimUdpPort,Integer32,read-create,,current,,The UDP port the client is using to send requests to primary RADIUS authentication server. Default value is 1812.
.1.3.6.1.4.1.11.2.14.11.15.2.13.1.1.1.4,HPN-ICF-RADIUS-MIB::hpnicfRdPrimState,INTEGER,read-create,,current,active(1):block(2),The state of the primary RADIUS authentication server. 1 (active) The primary authentication server is in active state. 2 (block) The primary authentication server is in block state.
.1.3.6.1.4.1.11.2.14.11.15.2.13.1.1.1.5,HPN-ICF-RADIUS-MIB::hpnicfRdSecAuthIp,IpAddress,read-create,,deprecated,,The IP address of secondary RADIUS authentication server.
.1.3.6.1.4.1.11.2.14.11.15.2.13.1.1.1.6,HPN-ICF-RADIUS-MIB::hpnicfRdSecUdpPort,Integer32,read-create,,current,,The UDP port the client is using to send requests to secondary RADIUS authentication server. Default value is 1812.
.1.3.6.1.4.1.11.2.14.11.15.2.13.1.1.1.7,HPN-ICF-RADIUS-MIB::hpnicfRdSecState,INTEGER,read-create,,current,active(1):block(2),The state of the secondary RADIUS authentication server. 1 (active) The secondary authentication server is in active state. 2 (block) The secondary authentication server is in block state.
.1.3.6.1.4.1.11.2.14.11.15.2.13.1.1.1.8,HPN-ICF-RADIUS-MIB::hpnicfRdKey,OCTET,read-create,,current,,The secret shared between the RADIUS client and RADIUS authentication server used in encoding and decoding sensitive data. When read, hpnicfRdKey always returns an Octet String of length zero.
.1.3.6.1.4.1.11.2.14.11.15.2.13.1.1.1.9,HPN-ICF-RADIUS-MIB::hpnicfRdRetry,Integer32,read-create,,current,,The number of attempts the client will make when trying to send requests to a server before it will consider the attempt failed. Default value is 3.
.1.3.6.1.4.1.11.2.14.11.15.2.13.1.1.1.10,HPN-ICF-RADIUS-MIB::hpnicfRdTimeout,Integer32,read-create,,current,,The timeout value the client will use when sending requests to a server. The unit is second. Default value is 3.
.1.3.6.1.4.1.11.2.14.11.15.2.13.1.1.1.11,HPN-ICF-RADIUS-MIB::hpnicfRdPrimAuthIpAddrType,INTEGER,read-create,,current,unknown(0):ipv4(1):ipv6(2):ipv4z(3):ipv6z(4):dns(16),The IP addresses type (IPv4 or IPv6) of primary RADIUS authentication server.
.1.3.6.1.4.1.11.2.14.11.15.2.13.1.1.1.12,HPN-ICF-RADIUS-MIB::hpnicfRdPrimAuthIpAddr,OCTET,read-create,,current,,The IP address of primary RADIUS authentication server.
.1.3.6.1.4.1.11.2.14.11.15.2.13.1.1.1.13,HPN-ICF-RADIUS-MIB::hpnicfRdSecAuthIpAddrType,INTEGER,read-create,,current,unknown(0):ipv4(1):ipv6(2):ipv4z(3):ipv6z(4):dns(16),The IP addresses type (IPv4 or IPv6) of secondary RADIUS authentication server.
.1.3.6.1.4.1.11.2.14.11.15.2.13.1.1.1.14,HPN-ICF-RADIUS-MIB::hpnicfRdSecAuthIpAddr,OCTET,read-create,,current,,The IP address of secondary RADIUS authentication server.
.1.3.6.1.4.1.11.2.14.11.15.2.13.1.1.1.15,HPN-ICF-RADIUS-MIB::hpnicfRdServerType,INTEGER,read-create,,current,standard(1):iphotel(2):portal(3):extended(4),Specify the type of RADIUS server. 1 (standard) - Server based on RFC protocol(s). 2 (iphotel) - Server for IP-Hotel or 201+ system. 3 (portal) - Server for iTellin Portal system. 4 (extended) - Server based on RADIUS extensions. Default type is standard.
.1.3.6.1.4.1.11.2.14.11.15.2.13.1.1.1.16,HPN-ICF-RADIUS-MIB::hpnicfRdQuietTime,INTEGER,read-create,,current,,The time for server returning active. The unit is minute. When the value is 0, the server state retains active. Default value is 5.
.1.3.6.1.4.1.11.2.14.11.15.2.13.1.1.1.17,HPN-ICF-RADIUS-MIB::hpnicfRdUserNameFormat,INTEGER,read-create,,current,withoutdomain(1):withdomain(2):keeporignal(3),Specify the user-name format that is sent to RADIUS server. 1 (withoutdomain) - send the user-name without domain. 2 (withdomain) - send the user-name with domain. 3 (keeporignal) - send the user-name as it is entered. Default format is withdomain.
.1.3.6.1.4.1.11.2.14.11.15.2.13.1.1.1.18,HPN-ICF-RADIUS-MIB::hpnicfRdRowStatus,INTEGER,read-create,,current,active(1):notInService(2):notReady(3):createAndGo(4):createAndWait(5):destroy(6),This object is responsible for managing the creation, deletion and modification of rows, which support active status and CreateAndGo, Destroy operation. To create a new row, hpnicfRdGroupName must be specified. To destroy an existent row, the hpnicfRdGroupName MUST NOT be referred by hpnicfDomainTable in hpnicfDomainRadiusGroupName column.
.1.3.6.1.4.1.11.2.14.11.15.2.13.1.1.1.19,HPN-ICF-RADIUS-MIB::hpnicfRdSecKey,OCTET,read-create,,current,,The secret shared between the RADIUS client and the secondary RADIUS authentication server used in encoding and decoding sensitive data. When read, hpnicfRdSecKey always returns an Octet String of length zero.
.1.3.6.1.4.1.11.2.14.11.15.2.13.1.1.1.20,HPN-ICF-RADIUS-MIB::hpnicfRdPrimVpnName,OCTET,read-create,,current,,The human-readable name of the VPN in which the primary RADIUS authentication server is placed.
.1.3.6.1.4.1.11.2.14.11.15.2.13.1.1.1.21,HPN-ICF-RADIUS-MIB::hpnicfRdSecVpnName,OCTET,read-create,,current,,The human-readable name of the VPN in which the secondary RADIUS authentication server is placed.
.1.3.6.1.4.1.11.2.14.11.15.2.13.1.1.1.22,HPN-ICF-RADIUS-MIB::hpnicfRdAuthNasIpAddrType,INTEGER,read-create,,current,unknown(0):ipv4(1):ipv6(2):ipv4z(3):ipv6z(4):dns(16),The type (IPv4 or IPv6) of the source IP used to communicate with RADIUS authentication server.
.1.3.6.1.4.1.11.2.14.11.15.2.13.1.1.1.23,HPN-ICF-RADIUS-MIB::hpnicfRdAuthNasIpAddr,IpAddress,read-create,,current,,The source IPv4 address used to communicate with the RADIUS authentication server.
.1.3.6.1.4.1.11.2.14.11.15.2.13.1.1.1.24,HPN-ICF-RADIUS-MIB::hpnicfRdAuthNasIpv6Addr,OCTET,read-create,,current,,The source IPv6 address used to communicate with the RADIUS authentication server.
.1.3.6.1.4.1.11.2.14.11.15.2.13.1.2,HPN-ICF-RADIUS-MIB::hpnicfRdAccInfoTable,,not-accessible,,current,,The (conceptual) table listing RADIUS accounting servers.
.1.3.6.1.4.1.11.2.14.11.15.2.13.1.2.1,HPN-ICF-RADIUS-MIB::hpnicfRdAccInfoEntry,,not-accessible,hpnicfRdAccGroupName,current,,An entry (conceptual row) representing a RADIUS accounting server.
.1.3.6.1.4.1.11.2.14.11.15.2.13.1.2.1.1,HPN-ICF-RADIUS-MIB::hpnicfRdAccGroupName,OCTET,not-accessible,,current,,The name of the RADIUS group referred to in this table entry.
.1.3.6.1.4.1.11.2.14.11.15.2.13.1.2.1.2,HPN-ICF-RADIUS-MIB::hpnicfRdPrimAccIpAddrType,INTEGER,read-create,,current,unknown(0):ipv4(1):ipv6(2):ipv4z(3):ipv6z(4):dns(16),The IP addresses type (IPv4 or IPv6) of primary RADIUS accounting server.
.1.3.6.1.4.1.11.2.14.11.15.2.13.1.2.1.3,HPN-ICF-RADIUS-MIB::hpnicfRdPrimAccIpAddr,OCTET,read-create,,current,,The IP address of primary RADIUS accounting server.
.1.3.6.1.4.1.11.2.14.11.15.2.13.1.2.1.4,HPN-ICF-RADIUS-MIB::hpnicfRdPrimAccUdpPort,Integer32,read-create,,current,,The UDP port the client is using to send requests to primary RADIUS accounting server. Default value is 1813.
.1.3.6.1.4.1.11.2.14.11.15.2.13.1.2.1.5,HPN-ICF-RADIUS-MIB::hpnicfRdPrimAccState,INTEGER,read-create,,current,active(1):block(2),The state of the primary RADIUS accounting server. 1 (active) The primary accounting server is in active state. 2 (block) The primary accounting server is in block state.
.1.3.6.1.4.1.11.2.14.11.15.2.13.1.2.1.6,HPN-ICF-RADIUS-MIB::hpnicfRdSecAccIpAddrType,INTEGER,read-create,,current,unknown(0):ipv4(1):ipv6(2):ipv4z(3):ipv6z(4):dns(16),The IP addresses type (IPv4 or IPv6) of secondary RADIUS accounting server.
.1.3.6.1.4.1.11.2.14.11.15.2.13.1.2.1.7,HPN-ICF-RADIUS-MIB::hpnicfRdSecAccIpAddr,OCTET,read-create,,current,,The IP address of secondary RADIUS accounting server.
.1.3.6.1.4.1.11.2.14.11.15.2.13.1.2.1.8,HPN-ICF-RADIUS-MIB::hpnicfRdSecAccUdpPort,Integer32,read-create,,current,,The UDP port the client is using to send requests to secondary RADIUS accounting server. Default value is 1813.
.1.3.6.1.4.1.11.2.14.11.15.2.13.1.2.1.9,HPN-ICF-RADIUS-MIB::hpnicfRdSecAccState,INTEGER,read-create,,current,active(1):block(2),The state of the secondary RADIUS accounting server. 1 (active) The secondary accounting server is in active state. 2 (block) The secondary accounting server is in block state.
.1.3.6.1.4.1.11.2.14.11.15.2.13.1.2.1.10,HPN-ICF-RADIUS-MIB::hpnicfRdAccKey,OCTET,read-create,,current,,The secret shared between the RADIUS client and RADIUS accounting server used in encoding and decoding sensitive data. When read, hpnicfRdAccKey always returns an Octet String of length zero.
.1.3.6.1.4.1.11.2.14.11.15.2.13.1.2.1.11,HPN-ICF-RADIUS-MIB::hpnicfRdAccRetry,Integer32,read-create,,current,,The number of attempt the client will make when trying to send requests to a server before it will consider the attempt failed. Default value is 3.
.1.3.6.1.4.1.11.2.14.11.15.2.13.1.2.1.12,HPN-ICF-RADIUS-MIB::hpnicfRdAccTimeout,Integer32,read-create,,current,,The timeout value the client will use when sending requests to a server. The unit is second. Default value is 3.
.1.3.6.1.4.1.11.2.14.11.15.2.13.1.2.1.13,HPN-ICF-RADIUS-MIB::hpnicfRdAccServerType,INTEGER,read-create,,current,standard(1):iphotel(2):portal(3):extended(4),Specify the type of RADIUS server. 1 (standard) - Server based on RFC protocol(s). 2 (iphotel) - Server for IP-Hotel or 201+ system. 3 (portal) - Server for iTellin Portal system. 4 (extended) - Server based on RADIUS extensions. Default type is standard.
.1.3.6.1.4.1.11.2.14.11.15.2.13.1.2.1.14,HPN-ICF-RADIUS-MIB::hpnicfRdAccQuietTime,INTEGER,read-create,,current,,The time for server returning active. The unit is minute. When the value is 0, the server state retains active. Default value is 5.
.1.3.6.1.4.1.11.2.14.11.15.2.13.1.2.1.15,HPN-ICF-RADIUS-MIB::hpnicfRdAccFailureAction,INTEGER,read-create,,current,ignore(1):reject(2),Defines the action that authentication should take if authentication succeeds but the associated accounting start fails. 1 (ignore) - treat as authentication success; ignore accounting start failure. 2 (reject) - treat as authentication failed if corresponding accounting start fails. Default value is 1(reject).
.1.3.6.1.4.1.11.2.14.11.15.2.13.1.2.1.16,HPN-ICF-RADIUS-MIB::hpnicfRdAccRealTime,INTEGER,read-create,,current,,Interval of realtime-accounting packets. The unit is minute. When the value is 0, the device doesn't send realtime-accounting packets. Default value is 12.
.1.3.6.1.4.1.11.2.14.11.15.2.13.1.2.1.17,HPN-ICF-RADIUS-MIB::hpnicfRdAccRealTimeRetry,INTEGER,read-create,,current,,The number of attempt the client will make when trying to send realtime-accounting packet to accounting server before it will consider the attempt failed. Default value is 5.
.1.3.6.1.4.1.11.2.14.11.15.2.13.1.2.1.18,HPN-ICF-RADIUS-MIB::hpnicfRdAccSaveStopPktEnable,INTEGER,read-create,,current,true(1):false(2),The control of whether save stop-accounting packet in local buffer and resend later when the accounting server doesn't respond. When SaveStopPktEnable is set to false, the value of AccStopRetry will be ignored. Default value is true.
.1.3.6.1.4.1.11.2.14.11.15.2.13.1.2.1.19,HPN-ICF-RADIUS-MIB::hpnicfRdAccStopRetry,INTEGER,read-create,,current,,The number of attempt the client will make when trying to send stop-accounting packet to accounting server. Default value is 500.
.1.3.6.1.4.1.11.2.14.11.15.2.13.1.2.1.20,HPN-ICF-RADIUS-MIB::hpnicfRdAccDataFlowUnit,INTEGER,read-create,,current,byte(1):kiloByte(2):megaByte(3):gigaByte(4),Specify data flow format that is sent to RADIUS server. The value SHOULD be set the same as the value of corresponding server. 1 (byte) - Specify 'byte' as the unit of data flow. 2 (kiloByte) - Specify 'kilo-byte' as the unit of data flow. 3 (megaByte) - Specify 'mega-byte' as the unit of data flow. 4 (gigaByte) - Specify 'giga-byte' as the unit of data flow. Default value is 1.
.1.3.6.1.4.1.11.2.14.11.15.2.13.1.2.1.21,HPN-ICF-RADIUS-MIB::hpnicfRdAccPacketUnit,INTEGER,read-create,,current,onePacket(1):kiloPacket(2):megaPacket(3):gigaPacket(4),Specify packet format that is sent to RADIUS server. The value SHOULD be set the same as the value of corresponding server. 1 (onePacket) - Specify 'one-packet' as the unit of packet. 2 (kiloPacket) - Specify 'kilo-packet' as the unit of packet. 3 (megaPacket) - Specify 'mega-packet' as the unit of packet. 4 (gigaPacket) - Specify 'giga-packet' as the unit of packet. Default value is 1.
.1.3.6.1.4.1.11.2.14.11.15.2.13.1.2.1.22,HPN-ICF-RADIUS-MIB::hpnicfRdAccRowStatus,INTEGER,read-create,,current,active(1):notInService(2):notReady(3):createAndGo(4):createAndWait(5):destroy(6),This object is responsible for managing the creation, deletion and modification of rows, which support active status and CreateAndGo, Destroy operation. To create a new row, hpnicfRdAccGroupName must be specified. To destroy an existent row, the hpnicfRdAccGroupName MUST NOT be referred by hpnicfDomainTable in hpnicfDomainRadiusGroupName column.
.1.3.6.1.4.1.11.2.14.11.15.2.13.1.2.1.23,HPN-ICF-RADIUS-MIB::hpnicfRdAcctOnEnable,INTEGER,read-create,,current,true(1):false(2),The control of Accounting-On function. The Accounting-On function is used by the client to mark the start of accounting (for example, upon booting) by sending Accounting-On packets and to mark the end of accounting (for example, just before a scheduled reboot) by sending Accounting-Off packets. Default value is false.
.1.3.6.1.4.1.11.2.14.11.15.2.13.1.2.1.24,HPN-ICF-RADIUS-MIB::hpnicfRdAcctOnSendTimes,Integer32,read-create,,current,,The number of Accounting-On packets the client will send before it considers the accounting server failed. Default value is 50.
.1.3.6.1.4.1.11.2.14.11.15.2.13.1.2.1.25,HPN-ICF-RADIUS-MIB::hpnicfRdAcctOnSendInterval,Integer32,read-create,,current,,Interval of Accounting-On packets. The unit is second. Default value is 3.
.1.3.6.1.4.1.11.2.14.11.15.2.13.1.2.1.26,HPN-ICF-RADIUS-MIB::hpnicfRdSecAccKey,OCTET,read-create,,current,,The secret shared between the RADIUS client and the secondary RADIUS accounting server used in encoding and decoding sensitive data. When read, hpnicfRdSecAccKey always returns an Octet String of length zero.
.1.3.6.1.4.1.11.2.14.11.15.2.13.1.2.1.27,HPN-ICF-RADIUS-MIB::hpnicfRdPrimAccVpnName,OCTET,read-create,,current,,The human-readable name of the VPN in which the primary RADIUS accounting server is placed.
.1.3.6.1.4.1.11.2.14.11.15.2.13.1.2.1.28,HPN-ICF-RADIUS-MIB::hpnicfRdSecAccVpnName,OCTET,read-create,,current,,The human-readable name of the VPN in which the secondary RADIUS accounting server is placed.
.1.3.6.1.4.1.11.2.14.11.15.2.13.1.2.1.29,HPN-ICF-RADIUS-MIB::hpnicfRdAccNasIpAddrType,INTEGER,read-create,,current,unknown(0):ipv4(1):ipv6(2):ipv4z(3):ipv6z(4):dns(16),The type (IPv4 or IPv6) of the source IP used to communicate with RADIUS accounting server.
.1.3.6.1.4.1.11.2.14.11.15.2.13.1.2.1.30,HPN-ICF-RADIUS-MIB::hpnicfRdAccNasIpAddr,IpAddress,read-create,,current,,The source IPv4 address used to communicate with the RADIUS accounting server.
.1.3.6.1.4.1.11.2.14.11.15.2.13.1.2.1.31,HPN-ICF-RADIUS-MIB::hpnicfRdAccNasIpv6Addr,OCTET,read-create,,current,,The source IPv6 address used to communicate with the RADIUS accounting server.
.1.3.6.1.4.1.11.2.14.11.15.2.13.1.3,HPN-ICF-RADIUS-MIB::hpnicfRadiusGlobalConfig,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.2.13.1.3.1,HPN-ICF-RADIUS-MIB::hpnicfRadiusAuthErrThreshold,Unsigned32,read-write,,current,,The threshold of authentication failure trap. A trap will be sent when the percent of the unsuccessful authentication exceeds this threshold.
.1.3.6.1.4.1.11.2.14.11.15.2.13.1.4,HPN-ICF-RADIUS-MIB::hpnicfRdSecondaryAuthServerTable,,not-accessible,,current,,The (conceptual) table listing RADIUS secondary authentication servers.
.1.3.6.1.4.1.11.2.14.11.15.2.13.1.4.1,HPN-ICF-RADIUS-MIB::hpnicfRdSecondaryAuthServerEntry,,not-accessible,hpnicfRdGroupName:hpnicfRdSecondaryAuthIpAddrType:hpnicfRdSecondaryAuthIpAddr:hpnicfRdSecondaryAuthVpnName:hpnicfRdSecondaryAuthUdpPort,current,,An entry (conceptual row) representing a RADIUS secondary authentication server.
.1.3.6.1.4.1.11.2.14.11.15.2.13.1.4.1.1,HPN-ICF-RADIUS-MIB::hpnicfRdSecondaryAuthIpAddrType,INTEGER,not-accessible,,current,unknown(0):ipv4(1):ipv6(2):ipv4z(3):ipv6z(4):dns(16),The IP addresses type (IPv4 or IPv6) of secondary RADIUS authentication server.
.1.3.6.1.4.1.11.2.14.11.15.2.13.1.4.1.2,HPN-ICF-RADIUS-MIB::hpnicfRdSecondaryAuthIpAddr,OCTET,not-accessible,,current,,The IP address of secondary RADIUS authentication server.
.1.3.6.1.4.1.11.2.14.11.15.2.13.1.4.1.3,HPN-ICF-RADIUS-MIB::hpnicfRdSecondaryAuthVpnName,OCTET,not-accessible,,current,,The human-readable name of the VPN in which the secondary RADIUS authentication server is placed.
.1.3.6.1.4.1.11.2.14.11.15.2.13.1.4.1.4,HPN-ICF-RADIUS-MIB::hpnicfRdSecondaryAuthUdpPort,Integer32,not-accessible,,current,,The UDP port the client is using to send requests to secondary RADIUS authentication server. Default value is 1812.
.1.3.6.1.4.1.11.2.14.11.15.2.13.1.4.1.5,HPN-ICF-RADIUS-MIB::hpnicfRdSecondaryAuthState,INTEGER,read-create,,current,active(1):block(2),The state of the secondary RADIUS authentication server. 1 (active) The secondary authentication server is in active state. 2 (block) The secondary authentication server is in block state.
.1.3.6.1.4.1.11.2.14.11.15.2.13.1.4.1.6,HPN-ICF-RADIUS-MIB::hpnicfRdSecondaryAuthKey,OCTET,read-create,,current,,The secret shared between the RADIUS client and the secondary RADIUS authentication server used in encoding and decoding sensitive data. When read, hpnicfRdSecondaryAuthKey always returns an Octet String of length zero.
.1.3.6.1.4.1.11.2.14.11.15.2.13.1.4.1.7,HPN-ICF-RADIUS-MIB::hpnicfRdSecondaryAuthRowStatus,INTEGER,read-create,,current,active(1):notInService(2):notReady(3):createAndGo(4):createAndWait(5):destroy(6),This object is responsible for managing the creation, deletion and modification of rows, which support active status and CreateAndGo, Destroy operation. To create a new row, hpnicfRdGroupName must be specified. The number of rows with the same hpnicfRdGroupName cann't be more than 15.
.1.3.6.1.4.1.11.2.14.11.15.2.13.1.5,HPN-ICF-RADIUS-MIB::hpnicfRdSecondaryAccServerTable,,not-accessible,,current,,The (conceptual) table listing RADIUS secondary accounting servers.
.1.3.6.1.4.1.11.2.14.11.15.2.13.1.5.1,HPN-ICF-RADIUS-MIB::hpnicfRdSecondaryAccServerEntry,,not-accessible,hpnicfRdAccGroupName:hpnicfRdSecondaryAccIpAddrType:hpnicfRdSecondaryAccIpAddr:hpnicfRdSecondaryAccVpnName:hpnicfRdSecondaryAccUdpPort,current,,An entry (conceptual row) representing a RADIUS secondary accounting server.
.1.3.6.1.4.1.11.2.14.11.15.2.13.1.5.1.1,HPN-ICF-RADIUS-MIB::hpnicfRdSecondaryAccIpAddrType,INTEGER,not-accessible,,current,unknown(0):ipv4(1):ipv6(2):ipv4z(3):ipv6z(4):dns(16),The IP addresses type (IPv4 or IPv6) of secondary RADIUS accounting server.
.1.3.6.1.4.1.11.2.14.11.15.2.13.1.5.1.2,HPN-ICF-RADIUS-MIB::hpnicfRdSecondaryAccIpAddr,OCTET,not-accessible,,current,,The IP address of secondary RADIUS accounting server.
.1.3.6.1.4.1.11.2.14.11.15.2.13.1.5.1.3,HPN-ICF-RADIUS-MIB::hpnicfRdSecondaryAccVpnName,OCTET,not-accessible,,current,,The human-readable name of the VPN in which the secondary RADIUS accounting server is placed.
.1.3.6.1.4.1.11.2.14.11.15.2.13.1.5.1.4,HPN-ICF-RADIUS-MIB::hpnicfRdSecondaryAccUdpPort,Integer32,not-accessible,,current,,The UDP port the client is using to send requests to secondary RADIUS accounting server. Default value is 1813.
.1.3.6.1.4.1.11.2.14.11.15.2.13.1.5.1.5,HPN-ICF-RADIUS-MIB::hpnicfRdSecondaryAccState,INTEGER,read-create,,current,active(1):block(2),The state of the secondary RADIUS accounting server. 1 (active) The secondary accounting server is in active state. 2 (block) The secondary accounting server is in block state.
.1.3.6.1.4.1.11.2.14.11.15.2.13.1.5.1.6,HPN-ICF-RADIUS-MIB::hpnicfRdSecondaryAccKey,OCTET,read-create,,current,,The secret shared between the RADIUS client and the secondary RADIUS accounting server used in encoding and decoding sensitive data. When read, hpnicfRdSecondaryAccKey always returns an Octet String of length zero.
.1.3.6.1.4.1.11.2.14.11.15.2.13.1.5.1.7,HPN-ICF-RADIUS-MIB::hpnicfRdSecondaryAccRowStatus,INTEGER,read-create,,current,active(1):notInService(2):notReady(3):createAndGo(4):createAndWait(5):destroy(6),This object is responsible for managing the creation, deletion and modification of rows, which support active status and CreateAndGo, Destroy operation. To create a new row, hpnicfRdAccGroupName must be specified. The number of rows with the same hpnicfRdAccGroupName cann't be more than 15.
.1.3.6.1.4.1.11.2.14.11.15.2.13.2,HPN-ICF-RADIUS-MIB::hpnicfRadiusAccounting,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.2.13.2.1,HPN-ICF-RADIUS-MIB::hpnicfRadiusAccClient,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.2.13.2.1.1,HPN-ICF-RADIUS-MIB::hpnicfRadiusAccServerTable,,not-accessible,,current,,The (conceptual) table listing the RADIUS accounting servers with which the client shares a secret.
.1.3.6.1.4.1.11.2.14.11.15.2.13.2.1.1.1,HPN-ICF-RADIUS-MIB::hpnicfRadiusAccServerEntry,,not-accessible,radiusAccServerIndex,current,,An entry (conceptual row) representing a RADIUS accounting server with which a client shares a secret.
.1.3.6.1.4.1.11.2.14.11.15.2.13.2.1.1.1.1,HPN-ICF-RADIUS-MIB::hpnicfRadiusAccClientStartRequests,Counter32,read-only,,current,,The number of RADIUS accounting start request sent to this server.
.1.3.6.1.4.1.11.2.14.11.15.2.13.2.1.1.1.2,HPN-ICF-RADIUS-MIB::hpnicfRadiusAccClientStartResponses,Counter32,read-only,,current,,The number of RADIUS accounting start response received from this server.
.1.3.6.1.4.1.11.2.14.11.15.2.13.2.1.1.1.3,HPN-ICF-RADIUS-MIB::hpnicfRadiusAccClientInterimRequests,Counter32,read-only,,current,,The number of RADIUS interim accounting request sent to this server.
.1.3.6.1.4.1.11.2.14.11.15.2.13.2.1.1.1.4,HPN-ICF-RADIUS-MIB::hpnicfRadiusAccClientInterimResponses,Counter32,read-only,,current,,The number of RADIUS interim accounting response received from this server.
.1.3.6.1.4.1.11.2.14.11.15.2.13.2.1.1.1.5,HPN-ICF-RADIUS-MIB::hpnicfRadiusAccClientStopRequests,Counter32,read-only,,current,,The number of RADIUS stop accounting request sent to this RADIUS server.
.1.3.6.1.4.1.11.2.14.11.15.2.13.2.1.1.1.6,HPN-ICF-RADIUS-MIB::hpnicfRadiusAccClientStopResponses,Counter32,read-only,,current,,The number of RADIUS stop accounting response received from this server.
.1.3.6.1.4.1.11.2.14.11.15.2.13.3,HPN-ICF-RADIUS-MIB::hpnicfRadiusServerTrap,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.2.13.3.0,HPN-ICF-RADIUS-MIB::hpnicfRadiusServerTrapPrefix,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.2.13.3.0.1,HPN-ICF-RADIUS-MIB::hpnicfRadiusAuthServerUpTrap,,,,,,This trap is generated when the device finds that the state of RADIUS authentication server becomes reachable from unreachable.
.1.3.6.1.4.1.11.2.14.11.15.2.13.3.0.2,HPN-ICF-RADIUS-MIB::hpnicfRadiusAccServerUpTrap,,,,,,This trap is generated when the device finds that the state of RADIUS accounting server becomes reachable from unreachable.
.1.3.6.1.4.1.11.2.14.11.15.2.13.3.0.3,HPN-ICF-RADIUS-MIB::hpnicfRadiusAuthErrTrap,,,,,,This trap is generated when the device finds that the percent of unsuccessful authentication exceeds a threshold, and the threshold is the value of node hpnicfRadiusAuthErrThreshold.
.1.3.6.1.4.1.11.2.14.11.15.2.13.3.1,HPN-ICF-RADIUS-MIB::hpnicfRadiusAuthServerDownTrap,,,,,,This trap is generated when the authentication RADIUS server doesn't respond client's requests for specified times.
.1.3.6.1.4.1.11.2.14.11.15.2.13.3.2,HPN-ICF-RADIUS-MIB::hpnicfRadiusAccServerDownTrap,,,,,,This trap is generated when the accounting RADIUS server doesn't respond client's requests for specified times.
.1.3.6.1.4.1.11.2.14.11.15.2.13.4,HPN-ICF-RADIUS-MIB::hpnicfRadiusAuthenticating,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.2.13.4.1,HPN-ICF-RADIUS-MIB::hpnicfRadiusAuthClient,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.2.13.4.1.1,HPN-ICF-RADIUS-MIB::hpnicfRadiusAuthServerTable,,not-accessible,,current,,The (conceptual) table listing the RADIUS authenticating servers with which the client shares a secret.
.1.3.6.1.4.1.11.2.14.11.15.2.13.4.1.1.1,HPN-ICF-RADIUS-MIB::hpnicfRadiusAuthServerEntry,,not-accessible,radiusAuthServerIndex,current,,An entry (conceptual row) representing a RADIUS authenticating server with which a client shares a secret.
.1.3.6.1.4.1.11.2.14.11.15.2.13.4.1.1.1.1,HPN-ICF-RADIUS-MIB::hpnicfRadiusAuthFailureTimes,Counter32,read-only,,current,,The number of RADIUS authenticating failed to this server.
.1.3.6.1.4.1.11.2.14.11.15.2.13.4.1.1.1.2,HPN-ICF-RADIUS-MIB::hpnicfRadiusAuthTimeoutTimes,Counter32,read-only,,current,,The number of RADIUS authenticating timeout to this server.
.1.3.6.1.4.1.11.2.14.11.15.2.13.4.1.1.1.3,HPN-ICF-RADIUS-MIB::hpnicfRadiusAuthRejectTimes,Counter32,read-only,,current,,The number of RADIUS authenticating rejected to this server.
.1.3.6.1.4.1.11.2.14.11.15.2.13.5,HPN-ICF-RADIUS-MIB::hpnicfRadiusExtend,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.2.13.5.1,HPN-ICF-RADIUS-MIB::hpnicfRadiusExtendObjects,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.2.13.5.2,HPN-ICF-RADIUS-MIB::hpnicfRadiusExtendTables,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.2.13.5.2.1,HPN-ICF-RADIUS-MIB::hpnicfRadiusSchAuthTable,,not-accessible,,current,,The (conceptual) table listing RADIUS authentication servers.
.1.3.6.1.4.1.11.2.14.11.15.2.13.5.2.1.1,HPN-ICF-RADIUS-MIB::hpnicfRadiusSchAuthEntry,,not-accessible,hpnicfRadiusSchAuthGroupName,current,,An entry (conceptual row) representing RADIUS authentication servers.
.1.3.6.1.4.1.11.2.14.11.15.2.13.5.2.1.1.1,HPN-ICF-RADIUS-MIB::hpnicfRadiusSchAuthGroupName,OCTET,not-accessible,,current,,The name of the RADIUS authentication server group referred to in this table entry.
.1.3.6.1.4.1.11.2.14.11.15.2.13.5.2.1.1.2,HPN-ICF-RADIUS-MIB::hpnicfRadiusSchAuthPrimIpAddr,IpAddress,read-create,,current,,The IP address of primary RADIUS authenticaiton server.
.1.3.6.1.4.1.11.2.14.11.15.2.13.5.2.1.1.3,HPN-ICF-RADIUS-MIB::hpnicfRadiusSchAuthPrimUdpPort,Integer32,read-create,,current,,The UDP port the client is using to send requests to primary RADIUS authentication server. Default value is 1812.
.1.3.6.1.4.1.11.2.14.11.15.2.13.5.2.1.1.4,HPN-ICF-RADIUS-MIB::hpnicfRadiusSchAuthPrimKey,OCTET,read-create,,current,,The secret shared between the RADIUS client and the primary RADIUS authentication server used in encoding and decoding sensitive data.
.1.3.6.1.4.1.11.2.14.11.15.2.13.5.2.1.1.5,HPN-ICF-RADIUS-MIB::hpnicfRadiusSchAuthSecIpAddr,IpAddress,read-create,,current,,The IP address of secondary RADIUS authenticaiton server.
.1.3.6.1.4.1.11.2.14.11.15.2.13.5.2.1.1.6,HPN-ICF-RADIUS-MIB::hpnicfRadiusSchAuthSecUdpPort,Integer32,read-create,,current,,The UDP port the client is using to send requests to secondary RADIUS authentication server. Default value is 1812.
.1.3.6.1.4.1.11.2.14.11.15.2.13.5.2.1.1.7,HPN-ICF-RADIUS-MIB::hpnicfRadiusSchAuthSecKey,OCTET,read-create,,current,,The secret shared between the RADIUS client and the secondary RADIUS authentication server used in encoding and decoding sensitive data.
.1.3.6.1.4.1.11.2.14.11.15.2.13.5.2.1.1.8,HPN-ICF-RADIUS-MIB::hpnicfRadiusSchAuthRowStatus,INTEGER,read-create,,current,active(1):notInService(2):notReady(3):createAndGo(4):createAndWait(5):destroy(6),This object is responsible for managing the creation, deletion and modification of rows, which support active status and CreateAndGo, Destroy operation. To create a new row, hpnicfRadiusSchAuthGroupName must be specified, and this action will create a corresponding domain that hpnicfDomainRadiusGroupName is the same as hpnicfRadiusSchAuthGroupName. To destroy an existent row, the hpnicfRadiusSchAuthGroupName MUST NOT be referred by hpnicfDomainTable in hpnicfDomainRadiusGroupName column.
.1.3.6.1.4.1.11.2.14.11.15.2.13.5.2.2,HPN-ICF-RADIUS-MIB::hpnicfRadiusSchAccTable,,not-accessible,,current,,The (conceptual) table listing RADIUS accounting servers.
.1.3.6.1.4.1.11.2.14.11.15.2.13.5.2.2.1,HPN-ICF-RADIUS-MIB::hpnicfRadiusSchAccEntry,,not-accessible,hpnicfRadiusSchAccGroupName,current,,An entry (conceptual row) representing RADIUS accounting servers.
.1.3.6.1.4.1.11.2.14.11.15.2.13.5.2.2.1.1,HPN-ICF-RADIUS-MIB::hpnicfRadiusSchAccGroupName,OCTET,not-accessible,,current,,The name of the RADIUS accounting server group referred to in this table entry.
.1.3.6.1.4.1.11.2.14.11.15.2.13.5.2.2.1.2,HPN-ICF-RADIUS-MIB::hpnicfRadiusSchAccPrimIpAddr,IpAddress,read-create,,current,,The IP address of primary RADIUS accounting server.
.1.3.6.1.4.1.11.2.14.11.15.2.13.5.2.2.1.3,HPN-ICF-RADIUS-MIB::hpnicfRadiusSchAccPrimUdpPort,Integer32,read-create,,current,,The UDP port the client is using to send requests to primary RADIUS accounting server. Default value is 1813.
.1.3.6.1.4.1.11.2.14.11.15.2.13.5.2.2.1.4,HPN-ICF-RADIUS-MIB::hpnicfRadiusSchAccPrimKey,OCTET,read-create,,current,,The secret shared between the RADIUS client and the primary RADIUS accounting server used in encoding and decoding sensitive data.
.1.3.6.1.4.1.11.2.14.11.15.2.13.5.2.2.1.5,HPN-ICF-RADIUS-MIB::hpnicfRadiusSchAccSecIpAddr,IpAddress,read-create,,current,,The IP address of secondary RADIUS accounting server.
.1.3.6.1.4.1.11.2.14.11.15.2.13.5.2.2.1.6,HPN-ICF-RADIUS-MIB::hpnicfRadiusSchAccSecUdpPort,Integer32,read-create,,current,,The UDP port the client is using to send requests to secondary RADIUS accounting server. Default value is 1813.
.1.3.6.1.4.1.11.2.14.11.15.2.13.5.2.2.1.7,HPN-ICF-RADIUS-MIB::hpnicfRadiusSchAccSecKey,OCTET,read-create,,current,,The secret shared between the RADIUS client and the secondary RADIUS accounting server used in encoding and decoding sensitive data.
.1.3.6.1.4.1.11.2.14.11.15.2.13.5.2.2.1.8,HPN-ICF-RADIUS-MIB::hpnicfRadiusSchAccRowStatus,INTEGER,read-create,,current,active(1):notInService(2):notReady(3):createAndGo(4):createAndWait(5):destroy(6),This object is responsible for managing the creation, deletion and modification of rows, which support active status and CreateAndGo, Destroy operation. To create a new row, hpnicfRadiusSchAccGroupName must be specified, and this action will create a corresponding domain that hpnicfDomainRadiusGroupName is the same as hpnicfRadiusSchAccGroupName. To destroy an existent row, the hpnicfRadiusSchAccGroupName MUST NOT be referred by hpnicfDomainTable in hpnicfDomainRadiusGroupName column.
.1.3.6.1.4.1.11.2.14.11.15.2.13.5.3,HPN-ICF-RADIUS-MIB::hpnicfRadiusExtendTraps,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.2.13.6,HPN-ICF-RADIUS-MIB::hpnicfRadiusStatistic,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.2.13.6.1,HPN-ICF-RADIUS-MIB::hpnicfRadiusStatAccReq,Counter64,read-only,,current,,It shows the number of radius account request to the radius server.
.1.3.6.1.4.1.11.2.14.11.15.2.13.6.2,HPN-ICF-RADIUS-MIB::hpnicfRadiusStatAccAck,Counter64,read-only,,current,,It shows the number of radius account response from the radius server.
.1.3.6.1.4.1.11.2.14.11.15.2.13.6.3,HPN-ICF-RADIUS-MIB::hpnicfRadiusStatLogoutReq,Counter64,read-only,,current,,It shows the number of logout request to the radius server.
.1.3.6.1.4.1.11.2.14.11.15.2.13.6.4,HPN-ICF-RADIUS-MIB::hpnicfRadiusStatLogoutAck,Counter64,read-only,,current,,It shows the number of logout response from the radius server.
.1.3.6.1.4.1.11.2.14.11.15.2.13.7,HPN-ICF-RADIUS-MIB::hpnicfRadiusServerTrapVarObjects,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.2.13.7.1,HPN-ICF-RADIUS-MIB::hpnicfRadiusServerFirstTrapTime,TimeTicks,accessible-for-notify,,current,,Represents the first trap time.
.1.3.6.1.4.1.11.2.14.11.15.2.14,HPN-ICF-OID-MIB::hpnicfPowerEthernetExt,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.2.14.1,HPN-ICF-POWER-ETH-EXT-MIB::hpnicfPsePortTable,,not-accessible,,current,,The indexing scheme is taken form that used by the IETF Power MIB. The same indexing scheme is used to give continuity in behaviour between that standard and this extensions definitioin.
.1.3.6.1.4.1.11.2.14.11.15.2.14.1.1,HPN-ICF-POWER-ETH-EXT-MIB::hpnicfPsePortEntry,,not-accessible,pethPsePortGroupIndex:pethPsePortIndex,current,,The pethPsePortGroupIndex is imported from the IETF Power MIB and uniquely identifies the group containing the port to which power ethernet PSE is connected. Group means (box in the stack, module in a rack). The pethPsePortPowerIndex is imported from the IETF Power MIB and uniquely identifies the power ethernet PSE port within group pethPseGroupIndex to which the power Ethernet PSE entry is connected. This value will match the local port number on a switch.
.1.3.6.1.4.1.11.2.14.11.15.2.14.1.1.2,HPN-ICF-POWER-ETH-EXT-MIB::hpnicfPsePortFaultDescription,OCTET,read-write,,current,,The object supports the fault category of the IETF Power MIB [1] pethPsePortDetectionStatus object. A textual description containing more information about the nature of this fault is provided by this object. Typically this will detail the precise PoE hardware state which is causing the pethPsePortDetectionStatus object to be in the 'fault' state. It is a DisplayString of up to 255 characters.
.1.3.6.1.4.1.11.2.14.11.15.2.14.1.1.3,HPN-ICF-POWER-ETH-EXT-MIB::hpnicfPsePortPeakPower,Integer32,read-write,,current,,The object specifies the peak power which has been consumed by the port. It is defined as the highest measured value of power in milliWatts that has been consumed by the port. Its value is only reset when link is lost, the port is PoE disabled or when it is manually reset by the user asspecified below. It is a read/write integer value with units of milliWatts. Writing a value of zero to this object resets its value to zero. Writing any other value to this object has no effect on its value and an error is returned.
.1.3.6.1.4.1.11.2.14.11.15.2.14.1.1.4,HPN-ICF-POWER-ETH-EXT-MIB::hpnicfPsePortAveragePower,Integer32,read-write,,current,,The object specifies the average power which has been consumed by the port. This object is a read/write integer value with units of milliWatts. Writing a value of zero to this object resets its value to zero. Writing any other value to this object has no effect on its value and an error is returned.
.1.3.6.1.4.1.11.2.14.11.15.2.14.1.1.5,HPN-ICF-POWER-ETH-EXT-MIB::hpnicfPsePortCurrentPower,Integer32,read-only,,current,,The object specifies the power currently being consumed by the port. It is a read only integer value with units of milliWatts.
.1.3.6.1.4.1.11.2.14.11.15.2.14.1.1.6,HPN-ICF-POWER-ETH-EXT-MIB::hpnicfPsePortPowerLimit,Integer32,read-write,,current,,The object specifies the power limit set for this port. The PSE will not supply more than this level of power to the specified port. It is a read/write integer value with units of milliWatts.
.1.3.6.1.4.1.11.2.14.11.15.2.14.1.1.7,HPN-ICF-POWER-ETH-EXT-MIB::hpnicfPsePortProfileIndex,Integer32,read-write,,current,,Indicates the power profile which is currently associated with this port. This object references the corresponding hpnicfPseProfileIndex object in the power profiles table. A value of zero is a special case and indicates that no power profile is currently associated with this port. When hpnicfPseProfileIndex is set to an index of existent profile, pethPsePortPowerPairs, pethPsePortPowerPriority, pethPsePortAdminEnable and hpnicfPsePortPowerLimit will be set to the same as corresponding value. PethPsePortPowerPairs, pethPsePortPowerPriority and pethPsePortAdminEnable are objects of rfc3621-Power-Ethernet.mib.
.1.3.6.1.4.1.11.2.14.11.15.2.14.2,HPN-ICF-POWER-ETH-EXT-MIB::hpnicfMainPseTable,,not-accessible,,current,,Description.
.1.3.6.1.4.1.11.2.14.11.15.2.14.2.1,HPN-ICF-POWER-ETH-EXT-MIB::hpnicfMainPseEntry,,not-accessible,pethMainPseGroupIndex,current,,The pethMainPseGroupIndex is imported from the IETF Power MIB and uniquely identifies the group containing the port to which power ethernet PSE is connected. Group means (box in the stack, module in a rack) and the value 1 MUST be used for non-modular devices.
.1.3.6.1.4.1.11.2.14.11.15.2.14.2.1.1,HPN-ICF-POWER-ETH-EXT-MIB::hpnicfMainPsePowerLimit,Integer32,read-write,,current,,The object specifies the power limit set for the unit as a whole. The PoE unit will already have a nominal power defined by the IETF Power MIB [1] pethMainPsePower object. This OPTIONAL object specifies a further limit to this nominal power value. This may be useful to control the thermals of the unit, or for internal testing purposes. One possible use for this object may be to lower the power consumption of the unit if one or more of the internal fans have broken. It is a read/write integer value with units of Watts (note - Watts is chosen instead of milliWatts here since the IETF Power MIB [1] measures unit based parameters, such as the pethMainPsePower object, in units of Watts).
.1.3.6.1.4.1.11.2.14.11.15.2.14.2.1.2,HPN-ICF-POWER-ETH-EXT-MIB::hpnicfMainPseAveragePower,Integer32,read-write,,current,,The object specifies the average power which has been consumed by the port. It is a read/write integer value with units of Watts (note - Watts is chosen instead of milliWatts here since the IETF Power MIB [1] measures unit based parameters, such as the pethMainPsePower object, in units of Watts). Writing a value of zero to this object resets its value to zero. Writing any other value to this object has no effect on its value and an error is returned.
.1.3.6.1.4.1.11.2.14.11.15.2.14.2.1.3,HPN-ICF-POWER-ETH-EXT-MIB::hpnicfMainPsePeakPower,Integer32,read-write,,current,,The object specifies the peak power which has been consumed for PoE. It is defined as the highest measured value of power in milliWatts that has been consumed at any one point in time by the sum of the PoE ports. Its value is only reset when the unit is powered on or when it is manually reset by the user as specifiedbelow. It is a read/write integer value with units of Watts (note - Watts is chosen instead of milliWatts here since the IETF Power MIB [1] measures unit based parameters, such as the pethMainPsePower object, in units of Watts). Writing a value of zero to this object resets its value to zero. Writing any other value to this object has noeffect on its value and an error is returned.
.1.3.6.1.4.1.11.2.14.11.15.2.14.2.1.4,HPN-ICF-POWER-ETH-EXT-MIB::hpnicfMainGuaranteedPowerRemaining,Integer32,read-only,,current,,The object specifies the amount of power remaining in the guaranteed power pool. Each time a port is placed into guaranteed mode it reserves a set amount of power out of the total guaranteed power pool for the system. This intention of this object is to give the client of this MIB (whether that be the CLI or the Web interface or the end user) an indication of how many ports can still be placed into guaranteed mode. It is a read only integer value with units of Watts(note - Watts is chosen instead of milliWatts here since the IETF Power MIB [1] measures unit based parameters,such as the pethMainPsePower object, in units of Watts).
.1.3.6.1.4.1.11.2.14.11.15.2.14.2.1.5,HPN-ICF-POWER-ETH-EXT-MIB::hpnicfMainPsePriorityMode,INTEGER,read-write,,current,disconnection(0):non-disconnection(1),Describes or controls the priority mode on slot which must be enabled firstly. When a new board is inserted, and the power is over-load, a value of disconnection(0) means that the power will stop supply to the low priority slot ; A value of non-disconnection(1) means that the slot still supply when a new board is inserted, and the power is over-load too.
.1.3.6.1.4.1.11.2.14.11.15.2.14.2.1.6,HPN-ICF-POWER-ETH-EXT-MIB::hpnicfMainPseLegacy,INTEGER,read-write,,current,enable(0):disable(1),Describes or controls the legacy mode on slot which must be enabled firstly. Legacy mode: standard or nonstandard PD detection mode.
.1.3.6.1.4.1.11.2.14.11.15.2.14.2.1.7,HPN-ICF-POWER-ETH-EXT-MIB::hpnicfMainPsePowerPriority,INTEGER,read-write,,current,critical(1):high(2):low(3),Describes or controls the priority of the PSE. The priority will be used by the PSE policy to prevent from power overloading. If the priority of PSE is set to critical, the PSE will turn into guaranteed mode. The priority could be used by a control mechanism that prevents power overloading by disconnecting PSEs with lower power priority. PSEs that connect devices critical to the application should be set to higher priority.
.1.3.6.1.4.1.11.2.14.11.15.2.14.3,HPN-ICF-POWER-ETH-EXT-MIB::hpnicfPseAutoDetectActive,INTEGER,read-write,,current,notSupported(1):disabled(2):enabled(3),The object specifies whether the device auto-detection feature is active. If this object is set to Active, and a known powered device is detected, then the port will automatically switch to Auto-Guaranteed mode. This is a stackwide object (ie. it is not referenced by group index).
.1.3.6.1.4.1.11.2.14.11.15.2.14.4,HPN-ICF-POWER-ETH-EXT-MIB::hpnicfPseComformance,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.2.14.4.1,HPN-ICF-POWER-ETH-EXT-MIB::hpnicfPseCompliances,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.2.14.4.1.1,HPN-ICF-POWER-ETH-EXT-MIB::hpnicfPseCompliance,,,,,,Description.
.1.3.6.1.4.1.11.2.14.11.15.2.14.4.2,HPN-ICF-POWER-ETH-EXT-MIB::hpnicfPseGroup,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.2.14.4.2.1,HPN-ICF-POWER-ETH-EXT-MIB::hpnicfPsePortGroup,,,,,,A collection of objects should be supported at the same time.
.1.3.6.1.4.1.11.2.14.11.15.2.14.4.2.2,HPN-ICF-POWER-ETH-EXT-MIB::hpnicfMainPseGroup,,,,,,A collection of objects should be supported at the same time.
.1.3.6.1.4.1.11.2.14.11.15.2.14.4.2.3,HPN-ICF-POWER-ETH-EXT-MIB::hpnicfPseScalarGroup,,,,,,A collection of scalar objects supported.
.1.3.6.1.4.1.11.2.14.11.15.2.14.4.2.4,HPN-ICF-POWER-ETH-EXT-MIB::hpnicfPsePDNotificationGroup,,,,,,PD Change Notification.
.1.3.6.1.4.1.11.2.14.11.15.2.14.4.2.5,HPN-ICF-POWER-ETH-EXT-MIB::hpnicfPseProfilesGroup,,,,,,A collection of objects should be supported at the same time.
.1.3.6.1.4.1.11.2.14.11.15.2.14.4.2.6,HPN-ICF-POWER-ETH-EXT-MIB::hpnicfPOEPowerThresholdLimitGroup,,,,,,Power threshold limits group.
.1.3.6.1.4.1.11.2.14.11.15.2.14.4.2.7,HPN-ICF-POWER-ETH-EXT-MIB::hpnicfPOEPowerSupInfoGroup,,,,,,The basic Power information group.
.1.3.6.1.4.1.11.2.14.11.15.2.14.4.2.8,HPN-ICF-POWER-ETH-EXT-MIB::hpnicfPOEPowerDCOutStateGroup,,,,,,The DC out power state group.
.1.3.6.1.4.1.11.2.14.11.15.2.14.4.2.9,HPN-ICF-POWER-ETH-EXT-MIB::hpnicfPOEPowerDCOutInfoGroup,,,,,,The power AC input switch information group
.1.3.6.1.4.1.11.2.14.11.15.2.14.4.2.10,HPN-ICF-POWER-ETH-EXT-MIB::hpnicfPOEPowerACSwitchStateModuleGroup,,,,,,PD Change Notification.
.1.3.6.1.4.1.11.2.14.11.15.2.14.4.2.11,HPN-ICF-POWER-ETH-EXT-MIB::hpnicfPOEPowerInCurStateGroup,,,,,,PD Change Notification.
.1.3.6.1.4.1.11.2.14.11.15.2.14.4.2.12,HPN-ICF-POWER-ETH-EXT-MIB::hpnicfPOEPowerAlarmStateGroup,,,,,,PD Change Notification.
.1.3.6.1.4.1.11.2.14.11.15.2.14.5,HPN-ICF-POWER-ETH-EXT-MIB::hpnicfPsePowerMaxValue,Integer32,read-write,,current,,The object specifies the max poe power for lanswitch. The value should between the power currently and the max power.
.1.3.6.1.4.1.11.2.14.11.15.2.14.6,HPN-ICF-POWER-ETH-EXT-MIB::hpnicfpseportNotification,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.2.14.6.1,HPN-ICF-POWER-ETH-EXT-MIB::hpnicfpsePDChangeNotification,,,,,,This notification indicates if PD has been inserted or pulled out.
.1.3.6.1.4.1.11.2.14.11.15.2.14.6.2,HPN-ICF-POWER-ETH-EXT-MIB::hpnicfPOEDisconnectNotification,,,,,,This notification indicates the POE power module does not disconnect.
.1.3.6.1.4.1.11.2.14.11.15.2.14.6.3,HPN-ICF-POWER-ETH-EXT-MIB::hpnicfPOEInputErrorNotification,,,,,,This notification indicates the POE power module input error.
.1.3.6.1.4.1.11.2.14.11.15.2.14.6.4,HPN-ICF-POWER-ETH-EXT-MIB::hpnicfPOEOutputErrorNotification,,,,,,This notification indicates the POE power module output error.
.1.3.6.1.4.1.11.2.14.11.15.2.14.6.5,HPN-ICF-POWER-ETH-EXT-MIB::hpnicfPOEOverVoltageNotification,,,,,,This notification indicates the POE power module overruns the voltage limit.
.1.3.6.1.4.1.11.2.14.11.15.2.14.6.6,HPN-ICF-POWER-ETH-EXT-MIB::hpnicfPOEOverTempNotification,,,,,,This notification indicates the POE power module overruns the temperature limit.
.1.3.6.1.4.1.11.2.14.11.15.2.14.6.7,HPN-ICF-POWER-ETH-EXT-MIB::hpnicfPOEFanErrorNotification,,,,,,This notification indicates the POE power module fan error.
.1.3.6.1.4.1.11.2.14.11.15.2.14.6.8,HPN-ICF-POWER-ETH-EXT-MIB::hpnicfPOEModuleShutdownNotification,,,,,,This notification indicates the POE power module is closed.
.1.3.6.1.4.1.11.2.14.11.15.2.14.6.9,HPN-ICF-POWER-ETH-EXT-MIB::hpnicfPOECurRestrictedNotification,,,,,,This notification indicates the POE power module current is restricted.
.1.3.6.1.4.1.11.2.14.11.15.2.14.6.10,HPN-ICF-POWER-ETH-EXT-MIB::hpnicfPOEACSwitchNotification,,,,,,This notification indicates the AC input switch alarm of this POE power.
.1.3.6.1.4.1.11.2.14.11.15.2.14.6.11,HPN-ICF-POWER-ETH-EXT-MIB::hpnicfPOEACInCurANotification,,,,,,This notification indicates the AC input current A alarm state of this POE power.
.1.3.6.1.4.1.11.2.14.11.15.2.14.6.12,HPN-ICF-POWER-ETH-EXT-MIB::hpnicfPOEACInCurBNotification,,,,,,This notification indicates the AC input current B alarm state of this POE power.
.1.3.6.1.4.1.11.2.14.11.15.2.14.6.13,HPN-ICF-POWER-ETH-EXT-MIB::hpnicfPOEACInCurCNotification,,,,,,This notification indicates the AC input current C alarm state of this POE power.
.1.3.6.1.4.1.11.2.14.11.15.2.14.6.14,HPN-ICF-POWER-ETH-EXT-MIB::hpnicfPOEACSwitchVolABNotification,,,,,,This notification indicates the AC input voltage AB alarm state of this POE power.
.1.3.6.1.4.1.11.2.14.11.15.2.14.6.15,HPN-ICF-POWER-ETH-EXT-MIB::hpnicfPOEACSwitchVolBCNotification,,,,,,This notification indicates the AC input voltage BC alarm state of this POE power.
.1.3.6.1.4.1.11.2.14.11.15.2.14.6.16,HPN-ICF-POWER-ETH-EXT-MIB::hpnicfPOEACSwitchVolCANotification,,,,,,This notification indicates the AC input voltage CA alarm state of this POE power.
.1.3.6.1.4.1.11.2.14.11.15.2.14.6.17,HPN-ICF-POWER-ETH-EXT-MIB::hpnicfPOEDCOutVolNotification,,,,,,This notification indicates the DC output alarm of this POE power.
.1.3.6.1.4.1.11.2.14.11.15.2.14.6.18,HPN-ICF-POWER-ETH-EXT-MIB::hpnicfPOEShutdownNotification,,,,,,This notification indicates the whole POE power has been shutdown.
.1.3.6.1.4.1.11.2.14.11.15.2.14.7,HPN-ICF-POWER-ETH-EXT-MIB::hpnicfPseProfilesTable,,not-accessible,,current,,A table of objects representing a set of power profiles. Power profiles can be applied to PoE ports, which have the effect of automatically setting the priority, power limit and PoE enable MIB objects to the values specified in the power profile.
.1.3.6.1.4.1.11.2.14.11.15.2.14.7.1,HPN-ICF-POWER-ETH-EXT-MIB::hpnicfPseProfilesEntry,,not-accessible,hpnicfPseProfileIndex,current,,A set of objects that display and control the Main power of a PSE.
.1.3.6.1.4.1.11.2.14.11.15.2.14.7.1.1,HPN-ICF-POWER-ETH-EXT-MIB::hpnicfPseProfileIndex,Integer32,not-accessible,,current,,The index of the profile. This uniquely allow the profile to be identified.
.1.3.6.1.4.1.11.2.14.11.15.2.14.7.1.2,HPN-ICF-POWER-ETH-EXT-MIB::hpnicfPseProfileName,OCTET,read-create,,current,,Assigns the profile a name with which the settings can be assiciated with. For example, 'NBX Phone'.
.1.3.6.1.4.1.11.2.14.11.15.2.14.7.1.3,HPN-ICF-POWER-ETH-EXT-MIB::hpnicfPseProfilePowerMode,INTEGER,read-create,,current,powerDisabled(1):powerEnabled(2),The power mode associated with this power profile. There are two possible power modes as follows: powerDisabled, powerEnabled. When a power profile is applied to a PSE port, this value dictates the settings of the ports pethPsePortPowerPriority and pethPsePortAdminEnable objects.
.1.3.6.1.4.1.11.2.14.11.15.2.14.7.1.4,HPN-ICF-POWER-ETH-EXT-MIB::hpnicfPseProfilePowerLimit,Integer32,read-create,,current,,The power limit to be applied to the ports hpnicfPsePortPowerLimit object when the profile is applied to the PSE port. Expressed in milliWatts.
.1.3.6.1.4.1.11.2.14.11.15.2.14.7.1.5,HPN-ICF-POWER-ETH-EXT-MIB::hpnicfPseProfilePriority,INTEGER,read-create,,current,critical(1):high(2):low(3),This object controls the priority of the port from the point of view of a power management algorithm. The priority that is set by this variable could be used by a control mechanism that prevents over current situations by disconnecting first ports with lower power priority. Ports that connect devices critical to the operation of the network - like the E911 telephones ports - should be set to higher priority.
.1.3.6.1.4.1.11.2.14.11.15.2.14.7.1.6,HPN-ICF-POWER-ETH-EXT-MIB::hpnicfPseProfilePairs,INTEGER,read-create,,current,signal(1):spare(2),Describes or controls the pairs in use. If the value of pethPsePortPowerPairsControl is true, this object is writable. A value of signal(1) means that the signal pairs only are in use. A value of spare(2) means that the spare pairs only are in use.
.1.3.6.1.4.1.11.2.14.11.15.2.14.7.1.7,HPN-ICF-POWER-ETH-EXT-MIB::hpnicfPseProfileApplyNum,Integer32,read-only,,current,,The number of this profile which has been applied. If hpnicfPseProfileApplyNum is not zero, user can't change the current line.
.1.3.6.1.4.1.11.2.14.11.15.2.14.7.1.8,HPN-ICF-POWER-ETH-EXT-MIB::hpnicfPseProfileRowStatus,INTEGER,read-create,,current,active(1):notInService(2):notReady(3):createAndGo(4):createAndWait(5):destroy(6),The status of this classifier. If hpnicfPseProfileApplyNum is not zero, user can't delete the current line.
.1.3.6.1.4.1.11.2.14.11.15.2.14.8,HPN-ICF-POWER-ETH-EXT-MIB::hpnicfPOEPowerObjects,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.2.14.8.1,HPN-ICF-POWER-ETH-EXT-MIB::hpnicfPOEThresholdLimitObjs,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.2.14.8.1.1,HPN-ICF-POWER-ETH-EXT-MIB::hpnicfPOEThresholdACMimimum,OCTET,read-write,,current,,Input threshold AC minimum. It is a read-write node. The value of this node is 'OCTET STRING', it is used to describe a float value. So this string should fit the following rule: 1. This string should be terminated by '\0'; 2. Every characters should be number or radix point; 3. The radix point should occur only once, and it should not be the first or the last character of the string. The value of this node should be smaller than 264.0V and larger than 90.0V. And it should be smaller than the hpnicfPOEThresholdACMaximum.
.1.3.6.1.4.1.11.2.14.11.15.2.14.8.1.2,HPN-ICF-POWER-ETH-EXT-MIB::hpnicfPOEThresholdACMaximum,OCTET,read-write,,current,,Input threshold AC maximum. It is a read-write node. The value of this node is 'OCTET STRING', it is used to describe a float value. So this string should fit the following rule: 1. This string should be terminated by '\0'; 2. Every characters should be number or radix point; 3. The radix point should occur only once, and it should not be the first or the last character of the string. It should be smaller than 264.0V and larger than 90.0V. And it should be larger than the hpnicfPOEThresholdACMinimum.
.1.3.6.1.4.1.11.2.14.11.15.2.14.8.1.3,HPN-ICF-POWER-ETH-EXT-MIB::hpnicfPOEThresholdDCMinimum,OCTET,read-write,,current,,Input threshold DC minimum. It is a read-write node. The value of this node is 'OCTET STRING', it is used to describe a float value. So this string should fit the following rule: 1. This string should be terminated by '\0'; 2. Every characters should be number or radix point; 3. The radix point should occur only once, and it should not be the first or the last character of the string. It should be smaller than 47.0V and larger than 45.0V.
.1.3.6.1.4.1.11.2.14.11.15.2.14.8.1.4,HPN-ICF-POWER-ETH-EXT-MIB::hpnicfPOEThresholdDCMaximum,OCTET,read-write,,current,,Input threshold DC maximum. It is a read-write node. The value of this node is 'OCTET STRING', it is used to describe a float value. So this string should fit the following rule: 1. This string should be terminated by '\0'; 2. Every characters should be number or radix point; 3. The radix point should occur only once, and it should not be the first or the last character of the string. It should be smaller than 57.0V and larger than 55.0V.
.1.3.6.1.4.1.11.2.14.11.15.2.14.8.2,HPN-ICF-POWER-ETH-EXT-MIB::hpnicfPOESupModuleInfoObjs,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.2.14.8.2.1,HPN-ICF-POWER-ETH-EXT-MIB::hpnicfPOEPowerType,OCTET,read-only,,current,,The type of the power.
.1.3.6.1.4.1.11.2.14.11.15.2.14.8.2.2,HPN-ICF-POWER-ETH-EXT-MIB::hpnicfPOEPowerModuleNum,Integer32,read-only,,current,,The number of the power modules.
.1.3.6.1.4.1.11.2.14.11.15.2.14.8.2.3,HPN-ICF-POWER-ETH-EXT-MIB::hpnicfPOESupervisionModuleName,OCTET,read-only,,current,,The object specifies the Supervision Module name on this POE power.
.1.3.6.1.4.1.11.2.14.11.15.2.14.8.2.4,HPN-ICF-POWER-ETH-EXT-MIB::hpnicfPOESMMajorVersion,Integer32,read-only,,current,,The object specifies the high byte of the monitor module version.
.1.3.6.1.4.1.11.2.14.11.15.2.14.8.2.5,HPN-ICF-POWER-ETH-EXT-MIB::hpnicfPOESMMinorVersion,Integer32,read-only,,current,,The object specifies the low byte of the monitor module version.
.1.3.6.1.4.1.11.2.14.11.15.2.14.8.2.6,HPN-ICF-POWER-ETH-EXT-MIB::hpnicfPOESMFactorName,OCTET,read-only,,current,,The object specifies the name of the manufactor.
.1.3.6.1.4.1.11.2.14.11.15.2.14.8.2.7,HPN-ICF-POWER-ETH-EXT-MIB::hpnicfPOEModuleInfoTable,,not-accessible,,current,,The table of the module information on this POE power.
.1.3.6.1.4.1.11.2.14.11.15.2.14.8.2.7.1,HPN-ICF-POWER-ETH-EXT-MIB::hpnicfPOEModuleInfoEntry,,not-accessible,hpnicfPOEModuleIndex,current,,The entry of the module information on this POE power.
.1.3.6.1.4.1.11.2.14.11.15.2.14.8.2.7.1.1,HPN-ICF-POWER-ETH-EXT-MIB::hpnicfPOEModuleIndex,Integer32,accessible-for-notify,,current,,The index of the current module on this POE power. It is also the index of hpnicfPOEModuleInfoTable. The range of this node is from 1 to hpnicfPOEPowerModuleNum.
.1.3.6.1.4.1.11.2.14.11.15.2.14.8.2.7.1.2,HPN-ICF-POWER-ETH-EXT-MIB::hpnicfPOEModuleID,Integer32,read-only,,current,,The ID of the current module on this POE power.
.1.3.6.1.4.1.11.2.14.11.15.2.14.8.2.7.1.3,HPN-ICF-POWER-ETH-EXT-MIB::hpnicfPOEModuleInfoPower,Integer32,read-only,,current,,The power of the current module on this POE power.
.1.3.6.1.4.1.11.2.14.11.15.2.14.8.2.7.1.4,HPN-ICF-POWER-ETH-EXT-MIB::hpnicfPOEModuleHardVerInfo,OCTET,read-only,,current,,The hardware version information of the current module on this POE power.
.1.3.6.1.4.1.11.2.14.11.15.2.14.8.3,HPN-ICF-POWER-ETH-EXT-MIB::hpnicfPOEDCOutStateObjects,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.2.14.8.3.1,HPN-ICF-POWER-ETH-EXT-MIB::hpnicfPOEDCOutStateModuleNum,Integer32,read-only,,current,,The module number on this POE power. It is the maximum of the hpnicfPOEDCOutStateIndex.
.1.3.6.1.4.1.11.2.14.11.15.2.14.8.3.2,HPN-ICF-POWER-ETH-EXT-MIB::hpnicfPOEDCOutStateTable,,not-accessible,,current,,The table of DC output power state on this POE power.
.1.3.6.1.4.1.11.2.14.11.15.2.14.8.3.2.1,HPN-ICF-POWER-ETH-EXT-MIB::hpnicfPOEDCOutStateEntry,,not-accessible,hpnicfPOEDCOutStateIndex,current,,The entry of the DC output power state on this POE power.
.1.3.6.1.4.1.11.2.14.11.15.2.14.8.3.2.1.1,HPN-ICF-POWER-ETH-EXT-MIB::hpnicfPOEDCOutStateIndex,Integer32,accessible-for-notify,,current,,The index of the DC output power state on this POE power. The range of this node is from 1 to hpnicfPOEDCOutStateModuleNum.
.1.3.6.1.4.1.11.2.14.11.15.2.14.8.3.2.1.2,HPN-ICF-POWER-ETH-EXT-MIB::hpnicfPOEDCOutDCVolAlarm,INTEGER,read-only,,current,normal(1):underLimit(2):aboveLimit(3):fuseBroken(4):switchOff(5):otherError(6),The DC output alarm of the DC output power state on this POE power. The value of this node will be the following values: normal (1), underLimit (2), aboveLimit (3), fuseBroken (4), switchOff (5), otherError (6).
.1.3.6.1.4.1.11.2.14.11.15.2.14.8.4,HPN-ICF-POWER-ETH-EXT-MIB::hpnicfPOEDCOutInfoObjects,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.2.14.8.4.1,HPN-ICF-POWER-ETH-EXT-MIB::hpnicfPOEDCOutCurNum,Integer32,read-only,,current,,The number of DC output current on this POE power. It is the maximum of hpnicfPOEDCOutInfoIndex.
.1.3.6.1.4.1.11.2.14.11.15.2.14.8.4.2,HPN-ICF-POWER-ETH-EXT-MIB::hpnicfPOEDCOutInfoTable,,not-accessible,,current,,The table of the DC output information on this POE power.
.1.3.6.1.4.1.11.2.14.11.15.2.14.8.4.2.1,HPN-ICF-POWER-ETH-EXT-MIB::hpnicfPOEDCOutInfoEntry,,not-accessible,hpnicfPOEDCOutInfoIndex,current,,The entry of the DC output information on this POE power.
.1.3.6.1.4.1.11.2.14.11.15.2.14.8.4.2.1.1,HPN-ICF-POWER-ETH-EXT-MIB::hpnicfPOEDCOutInfoIndex,Integer32,accessible-for-notify,,current,,The index of the DC output information on this POE POWER. The range of this node is from 1 to hpnicfPOEDCOutCurNum.
.1.3.6.1.4.1.11.2.14.11.15.2.14.8.4.2.1.2,HPN-ICF-POWER-ETH-EXT-MIB::hpnicfPOEDCOutVol,OCTET,read-only,,current,,The DC output voltage of the current DC output on this POE power.
.1.3.6.1.4.1.11.2.14.11.15.2.14.8.4.2.1.3,HPN-ICF-POWER-ETH-EXT-MIB::hpnicfPOEDCOutInfoLoadCur,OCTET,read-only,,current,,The total load current of the current DC output on this POE power.
.1.3.6.1.4.1.11.2.14.11.15.2.14.8.5,HPN-ICF-POWER-ETH-EXT-MIB::hpnicfPOEACSwitchStateModuleObjs,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.2.14.8.5.1,HPN-ICF-POWER-ETH-EXT-MIB::hpnicfPOEACSwitchStateModuleNum,Integer32,read-only,,current,,The number of the AC swtich state module on this POE power. It is the maximum of hpnicfPOEACSwitchStateIndex.
.1.3.6.1.4.1.11.2.14.11.15.2.14.8.5.2,HPN-ICF-POWER-ETH-EXT-MIB::hpnicfPOEACSwitchStateTable,,not-accessible,,current,,The table of the AC switch state on this POE power.
.1.3.6.1.4.1.11.2.14.11.15.2.14.8.5.2.1,HPN-ICF-POWER-ETH-EXT-MIB::hpnicfPOEACSwitchStateEntry,,not-accessible,hpnicfPOEACSwitchStateIndex,current,,The entry of the AC switch state on this POE power.
.1.3.6.1.4.1.11.2.14.11.15.2.14.8.5.2.1.1,HPN-ICF-POWER-ETH-EXT-MIB::hpnicfPOEACSwitchStateIndex,Integer32,accessible-for-notify,,current,,The index of the AC switch state on this POE power. The range of this node is from 1 to hpnicfPOEACSwitchStateModuleNum.
.1.3.6.1.4.1.11.2.14.11.15.2.14.8.5.2.1.2,HPN-ICF-POWER-ETH-EXT-MIB::hpnicfPOEACSwitchState,INTEGER,read-only,,current,on(1):off(2):highVoltInput(3):lowVoltInput(4),The AC switch state on this POE power. The value of this node will be one of the following values: on (1), off (2), highVoltInput (3), lowVoltInput (4)
.1.3.6.1.4.1.11.2.14.11.15.2.14.8.6,HPN-ICF-POWER-ETH-EXT-MIB::hpnicfPOEInCurStateObjects,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.2.14.8.6.1,HPN-ICF-POWER-ETH-EXT-MIB::hpnicfPOEInCurStateModuleNum,Integer32,read-only,,current,,The DC input current state of the module on this POE power. It is the maximum of the hpnicfPOESwitchStateVolExIndex.
.1.3.6.1.4.1.11.2.14.11.15.2.14.8.6.2,HPN-ICF-POWER-ETH-EXT-MIB::hpnicfPOEInCurAState,INTEGER,read-only,,current,normal(1):underLimit(2):aboveLimit(3):lackPhrase(4):fuseBroken(5):switchOff(6):otherError(7),The current A state in the DC input on this POE power. normal (1), underLimit (2), aboveLimit (3), lackPhrase (4), fuseBroken (5), switchOff (6), otherError (7).
.1.3.6.1.4.1.11.2.14.11.15.2.14.8.6.3,HPN-ICF-POWER-ETH-EXT-MIB::hpnicfPOEInCurBState,INTEGER,read-only,,current,normal(1):underLimit(2):aboveLimit(3):lackPhrase(4):fuseBroken(5):switchOff(6):otherError(7),The current B state in the DC input on this POE power. The value of this node will be one of the following values: normal (1), underLimit (2), aboveLimit (3), lackPhrase (4), fuseBroken (5), switchOff (6), otherError (7).
.1.3.6.1.4.1.11.2.14.11.15.2.14.8.6.4,HPN-ICF-POWER-ETH-EXT-MIB::hpnicfPOEInCurCState,INTEGER,read-only,,current,normal(1):underLimit(2):aboveLimit(3):lackPhrase(4):fuseBroken(5):switchOff(6):otherError(7),The current C state in the DC input on this POE power. The value of this node will be one of the following values: normal (1), underLimit (2), aboveLimit (3), lackPhrase (4), fuseBroken (5), switchOff (6), otherError (7).
.1.3.6.1.4.1.11.2.14.11.15.2.14.8.6.5,HPN-ICF-POWER-ETH-EXT-MIB::hpnicfPOESwitchStateVolExTable,,not-accessible,,current,,All alarm status of the VOL status. The value of this node will be one of the following values: normal (1), underLimit (2), aboveLimit (3), lackPhrase (4), fuseBroken (5), switchOff (6), otherError (7).
.1.3.6.1.4.1.11.2.14.11.15.2.14.8.6.5.1,HPN-ICF-POWER-ETH-EXT-MIB::hpnicfPOESwitchStateVolExEntry,,not-accessible,hpnicfPOESwitchStateVolExIndex,current,,The hpnicfPOESwitchStateVolExIndex will match the number of the VOL status.
.1.3.6.1.4.1.11.2.14.11.15.2.14.8.6.5.1.1,HPN-ICF-POWER-ETH-EXT-MIB::hpnicfPOESwitchStateVolExIndex,Integer32,accessible-for-notify,,current,,The object species the index of the VOL status. The range of this node is from 1 to hpnicfPOEInCurStateModuleNum.
.1.3.6.1.4.1.11.2.14.11.15.2.14.8.6.5.1.2,HPN-ICF-POWER-ETH-EXT-MIB::hpnicfPOESwitchStateInVolAB,INTEGER,read-only,,current,normal(1):underLimit(2):aboveLimit(3):lackPhrase(4):fuseBroken(5):switchOff(6):otherError(7),The object specifies the VOL AB alarm in each VOL status. The value of this node will be one of the following values: normal (1), underLimit (2), aboveLimit (3), lackPhrase (4), fuseBroken (5), switchOff (6), otherError (7).
.1.3.6.1.4.1.11.2.14.11.15.2.14.8.6.5.1.3,HPN-ICF-POWER-ETH-EXT-MIB::hpnicfPOESwitchStateInVolBC,INTEGER,read-only,,current,normal(1):underLimit(2):aboveLimit(3):lackPhrase(4):fuseBroken(5):switchOff(6):otherError(7),The object specifies the VOL BC alarm in each VOL status. The value of this node will be one of the following values: normal (1), underLimit (2), aboveLimit (3), lackPhrase (4), fuseBroken (5), switchOff (6), otherError (7).
.1.3.6.1.4.1.11.2.14.11.15.2.14.8.6.5.1.4,HPN-ICF-POWER-ETH-EXT-MIB::hpnicfPOESwitchStateInVolCA,INTEGER,read-only,,current,normal(1):underLimit(2):aboveLimit(3):lackPhrase(4):fuseBroken(5):switchOff(6):otherError(7),The object specifies the VOL CA alarm in each VOL status. The value of this node will be one of the following values: normal (1), underLimit (2), aboveLimit (3), lackPhrase (4), fuseBroken (5), switchOff (6), otherError (7).
.1.3.6.1.4.1.11.2.14.11.15.2.14.8.7,HPN-ICF-POWER-ETH-EXT-MIB::hpnicfPOEAlarmStateObjects,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.2.14.8.7.1,HPN-ICF-POWER-ETH-EXT-MIB::hpnicfPOEAlarmStateModuleNum,Integer32,read-only,,current,,The object specifies the number of the power modules in alarm state.
.1.3.6.1.4.1.11.2.14.11.15.2.14.8.7.2,HPN-ICF-POWER-ETH-EXT-MIB::hpnicfPOEAlarmStateInfoTable,,not-accessible,,current,,All alarm states in the POE power modules.
.1.3.6.1.4.1.11.2.14.11.15.2.14.8.7.2.1,HPN-ICF-POWER-ETH-EXT-MIB::hpnicfPOEAlarmStateInfoEntry,,not-accessible,hpnicfPOEAlarmModuleInfoIndex,current,,The hpnicfPOEAlarmModuleInfoIndex will match the number of the power module.
.1.3.6.1.4.1.11.2.14.11.15.2.14.8.7.2.1.1,HPN-ICF-POWER-ETH-EXT-MIB::hpnicfPOEAlarmModuleInfoIndex,Integer32,accessible-for-notify,,current,,The index specifies the index of the HpnicfPOEAlarmStateInfoEntry table. The range of this node is from 1 to hpnicfPOEAlarmStateModuleNum.
.1.3.6.1.4.1.11.2.14.11.15.2.14.8.7.2.1.2,HPN-ICF-POWER-ETH-EXT-MIB::hpnicfPOEModuleDisconnect,INTEGER,read-only,,current,normal(1):alarm(2),The node specifies the alarm state: The module does not link. The value of this node is one of the following values: normal (1), alarm (2).
.1.3.6.1.4.1.11.2.14.11.15.2.14.8.7.2.1.3,HPN-ICF-POWER-ETH-EXT-MIB::hpnicfPOEModuleInputError,INTEGER,read-only,,current,normal(1):alarm(2),The node specifies the alarm state: Input error. The value of this node is one of the following values: normal (1), alarm (2).
.1.3.6.1.4.1.11.2.14.11.15.2.14.8.7.2.1.4,HPN-ICF-POWER-ETH-EXT-MIB::hpnicfPOEModuleOutputError,INTEGER,read-only,,current,normal(1):alarm(2),The node specifies the alarm state: Output error. The value of this node is one of the following values: normal (1), alarm (2).
.1.3.6.1.4.1.11.2.14.11.15.2.14.8.7.2.1.5,HPN-ICF-POWER-ETH-EXT-MIB::hpnicfPOEModuleOverVoltage,INTEGER,read-only,,current,normal(1):alarm(2),The node specifies the alarm state: The voltage is too high. The value of this node is one of the following values: normal (1), alarm (2).
.1.3.6.1.4.1.11.2.14.11.15.2.14.8.7.2.1.6,HPN-ICF-POWER-ETH-EXT-MIB::hpnicfPOEModuleOverTemp,INTEGER,read-only,,current,normal(1):alarm(2),The node specifies the alarm state: The temperature is too high. The value of this node is one of the following values: normal (1), alarm (2).
.1.3.6.1.4.1.11.2.14.11.15.2.14.8.7.2.1.7,HPN-ICF-POWER-ETH-EXT-MIB::hpnicfPOEModuleFanError,INTEGER,read-only,,current,normal(1):alarm(2),The node specifies the alarm state: The fan error. The value of this node is one of the following values: normal (1), alarm (2).
.1.3.6.1.4.1.11.2.14.11.15.2.14.8.7.2.1.8,HPN-ICF-POWER-ETH-EXT-MIB::hpnicfPOEModuleShutdown,INTEGER,read-only,,current,normal(1):alarm(2),The node specifies the alarm state: The module is shutdown. The value of this node is one of the following values: normal (1), alarm (2).
.1.3.6.1.4.1.11.2.14.11.15.2.14.8.7.2.1.9,HPN-ICF-POWER-ETH-EXT-MIB::hpnicfPOEModuleCurRestricted,INTEGER,read-only,,current,normal(1):alarm(2),The node specifies the alarm state: The module limit the current. The value of this node is one of the following values: normal (1), alarm (2).
.1.3.6.1.4.1.11.2.14.11.15.2.14.9,HPN-ICF-POWER-ETH-EXT-MIB::hpnicfPsePolicyMode,INTEGER,read-write,,current,disabled(1):priority(2),The PSE policy only applies to the situation that when a new board (PSE) is inserted, and the power is overload. A value of priority(2) means that the power will stop supplying to the low priority PSE. About PSE priority, please refer to hpnicfMainPsePowerPriority. A value of disabled(1) means that the power will stop supplying to the new inserted PSE. The default value of this object is disabled(1).
.1.3.6.1.4.1.11.2.14.11.15.2.14.10,HPN-ICF-POWER-ETH-EXT-MIB::hpnicfPDPolicyMode,INTEGER,read-write,,current,disabled(1):priority(2),The PD policy only applies to the situation that when a new PD is inserted, and the power of PSE is overload. A value of priority(2) means that the power will stop supplying to the low priority port PD. About port priority, please refer to pethPsePortPowerPriority. A value of disabled(1) means that the slot stop supplying to the new inserted PD. The default value of this object is disabled(1).
.1.3.6.1.4.1.11.2.14.11.15.2.15,HPN-ICF-OID-MIB::hpnicfEntityRelation,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.2.15.1,HPN-ICF-ENTRELATION-MIB::hpnicfEntRelationObjects,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.2.15.1.1,HPN-ICF-ENTRELATION-MIB::hpnicfEntRelation,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.2.15.1.1.1,HPN-ICF-ENTRELATION-MIB::hpnicfEntRelationTable,,not-accessible,,current,,Entity MIB is used to express the physical location of the physical entities. Other relations, such as stack port pair and combo port pair, are not suitable to be implemented in Entity MIB. This MIB is used to express these relations. 
.1.3.6.1.4.1.11.2.14.11.15.2.15.1.1.1.1,HPN-ICF-ENTRELATION-MIB::hpnicfEntRelationEntry,,not-accessible,hpnicfEntRelationType:hpnicfEntityIndex:hpnicfRelatedEntityIndex,current,,The information about a particular physical entity.
.1.3.6.1.4.1.11.2.14.11.15.2.15.1.1.1.1.1,HPN-ICF-ENTRELATION-MIB::hpnicfEntRelationType,INTEGER,not-accessible,,current,stackport(1):comboport(2),The index of hpnicfEntRelationTable. entRelationType describe the relation type of the two entities(indicated by entityIndex and relatedEntityIndex) 
.1.3.6.1.4.1.11.2.14.11.15.2.15.1.1.1.1.2,HPN-ICF-ENTRELATION-MIB::hpnicfEntityIndex,Integer32,not-accessible,,current,,The index of hpnicfEntRelationTable. entityIndex is the index of the entity. This index is identical to entPhysicalIndex in ENTITY-MIB
.1.3.6.1.4.1.11.2.14.11.15.2.15.1.1.1.1.3,HPN-ICF-ENTRELATION-MIB::hpnicfRelatedEntityIndex,Integer32,read-only,,current,,The index of hpnicfEntRelationTable. relatedEntityIndex is the entity index that entityIndex related to, This index is identical to entPhysicalIndex in ENTITY-MIB
.1.3.6.1.4.1.11.2.14.11.15.2.15.2,HPN-ICF-ENTRELATION-MIB::hpnicfEntRelationConformance,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.2.15.2.1,HPN-ICF-ENTRELATION-MIB::hpnicfEntRelationCompliances,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.2.15.2.1.1,HPN-ICF-ENTRELATION-MIB::hpnicfEntRelationCompliance,,,,,,The compliance statement for systems supporting this MIB.
.1.3.6.1.4.1.11.2.14.11.15.2.15.2.2,HPN-ICF-ENTRELATION-MIB::hpnicfEntRelationGroups,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.2.15.2.2.1,HPN-ICF-ENTRELATION-MIB::hpnicfEntRelationGroup,,,,,,Standard Entity Relation group.
.1.3.6.1.4.1.11.2.14.11.15.2.16,HPN-ICF-OID-MIB::hpnicfProtocolVlan,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.2.16.1,HPN-ICF-PROTOCOL-VLAN-MIB::hpnicfProtocolVlanOperate,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.2.16.1.1,HPN-ICF-PROTOCOL-VLAN-MIB::hpnicfProtocolNumAllVlan,Integer32,read-only,,current,,The maximum number of protocols that can be configured on all VLANs. This number may vary with products.
.1.3.6.1.4.1.11.2.14.11.15.2.16.1.2,HPN-ICF-PROTOCOL-VLAN-MIB::hpnicfProtocolNumPerVlan,Integer32,read-only,,current,,The maximum number of protocols that can be configured per VLAN. This number may vary with products.
.1.3.6.1.4.1.11.2.14.11.15.2.16.1.3,HPN-ICF-PROTOCOL-VLAN-MIB::hpnicfProtocolNumAllPort,Integer32,read-only,,current,,The maximum number of protocols that can be applied on all ports. This number may vary with products.
.1.3.6.1.4.1.11.2.14.11.15.2.16.1.4,HPN-ICF-PROTOCOL-VLAN-MIB::hpnicfProtocolNumPerPort,Integer32,read-only,,current,,The maximum number of protocols that can be applied to each port. This number may vary with products.
.1.3.6.1.4.1.11.2.14.11.15.2.16.1.5,HPN-ICF-PROTOCOL-VLAN-MIB::hpnicfProtocolVlanTable,,not-accessible,,current,,Protocol-based VLAN configuration table.
.1.3.6.1.4.1.11.2.14.11.15.2.16.1.5.1,HPN-ICF-PROTOCOL-VLAN-MIB::hpnicfProtocolVlanEntry,,not-accessible,hpnicfProtocolVlanVlanId:hpnicfProtocolVlanProtocolIndex,current,,Protocol-based VLAN configuration entry.
.1.3.6.1.4.1.11.2.14.11.15.2.16.1.5.1.1,HPN-ICF-PROTOCOL-VLAN-MIB::hpnicfProtocolVlanVlanId,Integer32,not-accessible,,current,,Vlan ID.
.1.3.6.1.4.1.11.2.14.11.15.2.16.1.5.1.2,HPN-ICF-PROTOCOL-VLAN-MIB::hpnicfProtocolVlanProtocolIndex,Integer32,not-accessible,,current,,The protocol index value of a row in this table is in the range of [0..hpnicfProtocolNumPerVlan-1]. This object may not be provided during creation. In this case, a number is assigned by system automatically.
.1.3.6.1.4.1.11.2.14.11.15.2.16.1.5.1.3,HPN-ICF-PROTOCOL-VLAN-MIB::hpnicfProtocolVlanProtocolType,INTEGER,read-create,,current,ip(1):ipx(2):at(3):ipv6(4):mode-llc(101):mode-snap(102):mode-ethernetii(103):notConfigure(201), Specify protocol types supported by a protocol-based VLAN. Now protocols supported on Layer 3 include ip, ipx, at, ipv6, etc. Now protocols supported on Layer 2 include llc, snap, ethernetii, etc. For detailed information, see description of hpnicfProtocolVlanProtocolTypeValue. 
.1.3.6.1.4.1.11.2.14.11.15.2.16.1.5.1.4,HPN-ICF-PROTOCOL-VLAN-MIB::hpnicfProtocolVlanProtocolSubType,INTEGER,read-create,,current,notused(1):ethernetii(2):llc(3):raw(4):snap(5):etype(6), See description of hpnicfProtocolVlanProtocolTypeValue. 
.1.3.6.1.4.1.11.2.14.11.15.2.16.1.5.1.5,HPN-ICF-PROTOCOL-VLAN-MIB::hpnicfProtocolVlanProtocolTypeValue,OCTET,read-create,,current,, The value of the configured protocol type. By default, semicolon(;) is used as a separator between different parts in the content of the object. The relationship among hpnicfProtocolVlanProtocolType, hpnicfProtocolVlanProtocolSubType and hpnicfProtocolVlanProtocolTypeValue is as follows: |----------------------------------------------------------------------------------------------| | hpnicfProtocolVlan- | hpnicfProtocolVlan- | hpnicfProtocolVlanProtocolTypeValue | | ProtocolType | ProtocolSubType | | |-------------------|-------------------|------------------------------------------------------| | ip | notused | notused for create operation | |-------------------|-------------------|------------------------------------------------------| | ipv6 | notused | notused for create operation | |-------------------|-------------------|------------------------------------------------------| | at | notused | notused for create operation | |-------------------|-------------------|------------------------------------------------------| | ipx | ethernetii | notused for create operation | | llc | | | | raw | | | | snap | | |-------------------|-------------------|------------------------------------------------------| | mode-snap | etype | hex string like '600', which means 0x0600. | | | | The range is [0x600..0xffff] | |-------------------|-------------------|------------------------------------------------------| | mode-ethernetii | etype | hex string like '600', which means 0x0600. | | | | The range is [0x600..0xffff] | |-------------------|-------------------|------------------------------------------------------| | mode-llc | notused | the sequence of different parts is as follows. | | | | [dsap value][;ssap value][dsap value;ssap value] | | | | Both range is [0x00..0xff] | | | | | | | | For example. Suppose value of dsap and ssap are 0x09 | | | | and 0x0a. | | | | If neither dsap or ssap, the string length is zero. | | | | If dsap provided, the string is '09;' or '09' | | | | If ssap provided, the value is ';0a' | | | | If dsap and ssap provided, the value is '09;0a' | |-------------------|-------------------|------------------------------------------------------| 
.1.3.6.1.4.1.11.2.14.11.15.2.16.1.5.1.6,HPN-ICF-PROTOCOL-VLAN-MIB::hpnicfProtocolVlanRowStatus,INTEGER,read-create,,current,active(1):notInService(2):notReady(3):createAndGo(4):createAndWait(5):destroy(6),The row status of this table.
.1.3.6.1.4.1.11.2.14.11.15.2.16.1.6,HPN-ICF-PROTOCOL-VLAN-MIB::hpnicfProtocolVlanPortTable,,not-accessible,,current,,Protocol-based VLAN port information table.
.1.3.6.1.4.1.11.2.14.11.15.2.16.1.6.1,HPN-ICF-PROTOCOL-VLAN-MIB::hpnicfProtocolVlanPortEntry,,not-accessible,hpnicfProtocolVlanPortIndex:hpnicfProtocolVlanPortVlanId:hpnicfProtocolVlanPortProtocolId,current,,Protocol-based VLAN port information entry.
.1.3.6.1.4.1.11.2.14.11.15.2.16.1.6.1.1,HPN-ICF-PROTOCOL-VLAN-MIB::hpnicfProtocolVlanPortIndex,Integer32,not-accessible,,current,, The maximum number is the total number of ports supported by device. 
.1.3.6.1.4.1.11.2.14.11.15.2.16.1.6.1.2,HPN-ICF-PROTOCOL-VLAN-MIB::hpnicfProtocolVlanPortVlanId,Integer32,not-accessible,,current,,The protocol-based VLAN ID.
.1.3.6.1.4.1.11.2.14.11.15.2.16.1.6.1.3,HPN-ICF-PROTOCOL-VLAN-MIB::hpnicfProtocolVlanPortProtocolId,Integer32,not-accessible,,current,,The protocol index.
.1.3.6.1.4.1.11.2.14.11.15.2.16.1.6.1.4,HPN-ICF-PROTOCOL-VLAN-MIB::hpnicfProtocolVlanPortProtocolType,INTEGER,read-only,,current,ip(1):ipx(2):at(3):ipv6(4):mode-llc(101):mode-snap(102):mode-ethernetii(103):notConfigure(201),See the description of hpnicfProtocolVlanProtocolType.
.1.3.6.1.4.1.11.2.14.11.15.2.16.1.6.1.5,HPN-ICF-PROTOCOL-VLAN-MIB::hpnicfProtocolVlanPortProtocolSubType,INTEGER,read-only,,current,notused(1):ethernetii(2):llc(3):raw(4):snap(5):etype(6),See the description of hpnicfProtocolVlanProtocolSubType.
.1.3.6.1.4.1.11.2.14.11.15.2.16.1.6.1.6,HPN-ICF-PROTOCOL-VLAN-MIB::hpnicfProtocolVlanPortTypeValue,OCTET,read-only,,current,,See the description of hpnicfProtocolVlanProtocolTypeValue.
.1.3.6.1.4.1.11.2.14.11.15.2.16.1.6.1.7,HPN-ICF-PROTOCOL-VLAN-MIB::hpnicfProtocolVlanPortRowStatus,INTEGER,read-create,,current,active(1):notInService(2):notReady(3):createAndGo(4):createAndWait(5):destroy(6),The row status of this table.
.1.3.6.1.4.1.11.2.14.11.15.2.16.1.6.1.8,HPN-ICF-PROTOCOL-VLAN-MIB::hpnicfProtocolVlanPortStatus,INTEGER,read-only,,current,active(1):inactive(2),The protocol VLAN status on the port. The value is active only when hpnicfProtocolVlanPortProtocolId has the corresponding entry in hpnicfProtocolVlanTable, the port link type is hybrid, and the VLAN is allowed by the port. active: protocol VLAN has been applied on the port. inactive: protocol VLAN is not applied on the port.
.1.3.6.1.4.1.11.2.14.11.15.2.16.1.7,HPN-ICF-PROTOCOL-VLAN-MIB::hpnicfDifferentProtocolNumAllPort,Integer32,read-only,,current,,The maximum number of different protocols that can be applied to all ports.
.1.3.6.1.4.1.11.2.14.11.15.2.16.2,HPN-ICF-PROTOCOL-VLAN-MIB::hpnicfProtocolVlanConformance,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.2.16.2.1,HPN-ICF-PROTOCOL-VLAN-MIB::hpnicfProtocolVlanCompliances,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.2.16.2.1.1,HPN-ICF-PROTOCOL-VLAN-MIB::hpnicfProtocolVlanCompliance,,,,,,The compliance statement for protocol VLAN MIB.
.1.3.6.1.4.1.11.2.14.11.15.2.16.2.2,HPN-ICF-PROTOCOL-VLAN-MIB::hpnicfProtocolVlanGroups,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.2.16.2.2.1,HPN-ICF-PROTOCOL-VLAN-MIB::hpnicfProtocolVlanOperateGroup,,,,,,A group of scalar objects describing the maximum number.
.1.3.6.1.4.1.11.2.14.11.15.2.16.2.2.2,HPN-ICF-PROTOCOL-VLAN-MIB::hpnicfProtocolVlanProtocolGroup,,,,,,A group of protocol VLAN protocol.
.1.3.6.1.4.1.11.2.14.11.15.2.16.2.2.3,HPN-ICF-PROTOCOL-VLAN-MIB::hpnicfProtocolVlanPortGroup,,,,,,A group of protocol VLAN port.
.1.3.6.1.4.1.11.2.14.11.15.2.17,HPN-ICF-OID-MIB::hpnicfQosProfile,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.2.17.1,HPN-ICF-QOS-PROFILE-MIB::hpnicfQoSProfObjects,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.2.17.1.1,HPN-ICF-QOS-PROFILE-MIB::hpnicfQoSProf,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.2.17.1.1.1,HPN-ICF-QOS-PROFILE-MIB::hpnicfQoSProfTable,,not-accessible,,current,,QoS profile table is used to config the qos profiles.
.1.3.6.1.4.1.11.2.14.11.15.2.17.1.1.1.1,HPN-ICF-QOS-PROFILE-MIB::hpnicfQoSProfEntry,,not-accessible,hpnicfQoSProfIndex,current,, 
.1.3.6.1.4.1.11.2.14.11.15.2.17.1.1.1.1.1,HPN-ICF-QOS-PROFILE-MIB::hpnicfQoSProfIndex,Integer32,not-accessible,,current,,QoS profile table index.
.1.3.6.1.4.1.11.2.14.11.15.2.17.1.1.1.1.2,HPN-ICF-QOS-PROFILE-MIB::hpnicfQoSProfName,OCTET,read-create,,current,,QoS profile name.
.1.3.6.1.4.1.11.2.14.11.15.2.17.1.1.1.1.3,HPN-ICF-QOS-PROFILE-MIB::hpnicfQoSProfActionNumber,Integer32,read-only,,current,,Total number of actions of a QoS profile.
.1.3.6.1.4.1.11.2.14.11.15.2.17.1.1.1.1.4,HPN-ICF-QOS-PROFILE-MIB::hpnicfQoSProfRowStatus,INTEGER,read-create,,current,active(1):notInService(2):notReady(3):createAndGo(4):createAndWait(5):destroy(6),RowStatus,Now support three state:CreateAndGo,Active,Destroy.
.1.3.6.1.4.1.11.2.14.11.15.2.17.1.2,HPN-ICF-QOS-PROFILE-MIB::hpnicfQoSAction,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.2.17.1.2.1,HPN-ICF-QOS-PROFILE-MIB::hpnicfQoSTrafficLimitTable,,not-accessible,,current,,Traffic limit table is used to set the average rate or peak rate of the flow. IP and Link ACL rules can be applied simultaneously, IP and User based ACL rules can not be applied simultaneously, Link and User based ACL rules can not be applied simultaneously. Unused ones is represented with default values.
.1.3.6.1.4.1.11.2.14.11.15.2.17.1.2.1.1,HPN-ICF-QOS-PROFILE-MIB::hpnicfQoSTrafficLimitEntry,,not-accessible,hpnicfQoSTrafLmtProfIndex:hpnicfQoSTrafLmtActionIndex,current,, 
.1.3.6.1.4.1.11.2.14.11.15.2.17.1.2.1.1.1,HPN-ICF-QOS-PROFILE-MIB::hpnicfQoSTrafLmtProfIndex,Integer32,not-accessible,,current,,The index of QoS profile which the traffic-limit action belongs to.
.1.3.6.1.4.1.11.2.14.11.15.2.17.1.2.1.1.2,HPN-ICF-QOS-PROFILE-MIB::hpnicfQoSTrafLmtActionIndex,Integer32,not-accessible,,current,,The index of traffic-limit action.
.1.3.6.1.4.1.11.2.14.11.15.2.17.1.2.1.1.3,HPN-ICF-QOS-PROFILE-MIB::hpnicfQoSTrafLmtDirection,INTEGER,read-create,,current,invalid(0):input(1):ouput(2),The direction of traffic-limit action.
.1.3.6.1.4.1.11.2.14.11.15.2.17.1.2.1.1.4,HPN-ICF-QOS-PROFILE-MIB::hpnicfQoSTrafLmtUserAclNum,Integer32,read-create,,current,,The number of user-based acl group.
.1.3.6.1.4.1.11.2.14.11.15.2.17.1.2.1.1.5,HPN-ICF-QOS-PROFILE-MIB::hpnicfQoSTrafLmtUserAclRule,Integer32,read-create,,current,,The subitem of user-based acl rule.
.1.3.6.1.4.1.11.2.14.11.15.2.17.1.2.1.1.6,HPN-ICF-QOS-PROFILE-MIB::hpnicfQoSTrafLmtIpAclNum,Integer32,read-create,,current,,The number of Ip-based acl group.
.1.3.6.1.4.1.11.2.14.11.15.2.17.1.2.1.1.7,HPN-ICF-QOS-PROFILE-MIB::hpnicfQoSTrafLmtIpAclRule,Integer32,read-create,,current,,The subitem of IP-based acl rule.
.1.3.6.1.4.1.11.2.14.11.15.2.17.1.2.1.1.8,HPN-ICF-QOS-PROFILE-MIB::hpnicfQoSTrafLmtLinkAclNum,Integer32,read-create,,current,,The number of Link-based acl group
.1.3.6.1.4.1.11.2.14.11.15.2.17.1.2.1.1.9,HPN-ICF-QOS-PROFILE-MIB::hpnicfQoSTrafLmtLinkAclRule,Integer32,read-create,,current,,The subitem of Link-based acl rule.
.1.3.6.1.4.1.11.2.14.11.15.2.17.1.2.1.1.10,HPN-ICF-QOS-PROFILE-MIB::hpnicfQoSTrafLmtTargetRateMbps,Integer32,read-create,,current,,Target rate:Mbps Some products only support Mbps,but others support Kbps,so Kbps and Mbps should be supportted mutually exclusively on the same product.
.1.3.6.1.4.1.11.2.14.11.15.2.17.1.2.1.1.11,HPN-ICF-QOS-PROFILE-MIB::hpnicfQoSTrafLmtTargetRateKbps,Integer32,read-create,,current,,Target rate:Kbps. Some products only support Kbps,but others support Mbps,so Kbps and Mbps should be supportted mutually exclusively on the same product.
.1.3.6.1.4.1.11.2.14.11.15.2.17.1.2.1.1.12,HPN-ICF-QOS-PROFILE-MIB::hpnicfQoSTrafLmtPeakRate,Integer32,read-create,,current,,Peak rate
.1.3.6.1.4.1.11.2.14.11.15.2.17.1.2.1.1.13,HPN-ICF-QOS-PROFILE-MIB::hpnicfQoSTrafLmtCIR,Integer32,read-create,,current,,Committed Information Rate. unit:kbps.
.1.3.6.1.4.1.11.2.14.11.15.2.17.1.2.1.1.14,HPN-ICF-QOS-PROFILE-MIB::hpnicfQoSTrafLmtCBS,Integer32,read-create,,current,,Committed Burst Size. unit:byte.
.1.3.6.1.4.1.11.2.14.11.15.2.17.1.2.1.1.15,HPN-ICF-QOS-PROFILE-MIB::hpnicfQoSTrafLmtEBS,Integer32,read-create,,current,,Excess Burst Size. unit:byte.
.1.3.6.1.4.1.11.2.14.11.15.2.17.1.2.1.1.16,HPN-ICF-QOS-PROFILE-MIB::hpnicfQoSTrafLmtPIR,Integer32,read-create,,current,,Peak Information Rate. unit:kbps.
.1.3.6.1.4.1.11.2.14.11.15.2.17.1.2.1.1.17,HPN-ICF-QOS-PROFILE-MIB::hpnicfQoSTrafLmtConformLocalPre,Integer32,read-create,,current,,The local precedence of conformed flow.
.1.3.6.1.4.1.11.2.14.11.15.2.17.1.2.1.1.18,HPN-ICF-QOS-PROFILE-MIB::hpnicfQoSTrafLmtConformActionType,INTEGER,read-create,,current,invalid(0):remark-cos(1):remark-drop-priority(2):remark-cos-drop-priority(3):remark-policed-service(4):remark-dscp(5),The action type of conformed flow.
.1.3.6.1.4.1.11.2.14.11.15.2.17.1.2.1.1.19,HPN-ICF-QOS-PROFILE-MIB::hpnicfQoSTrafLmtExceedActionType,INTEGER,read-create,,current,invalid(0):forward(1):drop(2):remarkdscp(3):exceed-cos(4),The action type of non-conformed flow.
.1.3.6.1.4.1.11.2.14.11.15.2.17.1.2.1.1.20,HPN-ICF-QOS-PROFILE-MIB::hpnicfQoSTrafLmtExceedDscp,Integer32,read-create,,current,,The remarked DSCP value of non-conformed flow. DSCP 255 is used as default value and for get/get-next operation of this node. If the user does not set exceeding action as remarking DSCP, then value 255 is returned for get/get-next operation. 
.1.3.6.1.4.1.11.2.14.11.15.2.17.1.2.1.1.21,HPN-ICF-QOS-PROFILE-MIB::hpnicfQoSTrafLmtExceedCos,Integer32,read-create,,current,,The remarked COS value of non-conformed flow. COS 255 is used as default value and for get/get-next operation of this node. If the user does not set exceeding action as remarking COS, then value 255 is returned for get/get-next operation. 
.1.3.6.1.4.1.11.2.14.11.15.2.17.1.2.1.1.22,HPN-ICF-QOS-PROFILE-MIB::hpnicfQoSTrafLmtRowStatus,INTEGER,read-create,,current,active(1):notInService(2):notReady(3):createAndGo(4):createAndWait(5):destroy(6),RowStatus,Now support three state:CreateAndGo,Active,Destroy.
.1.3.6.1.4.1.11.2.14.11.15.2.17.1.2.1.1.23,HPN-ICF-QOS-PROFILE-MIB::hpnicfQoSTrafLmtConformCos,Integer32,read-create,,current,,If the user chooses remark-cos value of the hpnicfQoSTrafLmtConformActionType, this object can be used to set the conform cos value. There are some enumerations as follows: best-effort Specify best-effort priority(0) background Specify background priority(1) spare Specify spare priority(2) excellent-effort Specify excellent-effort priority(3) controlled-load Specify controlled-load priority(4) video Specify video priority(5) voice Specify voice priority(6) network-management Specify network-management priority(7) 255 indicates invalid value. 
.1.3.6.1.4.1.11.2.14.11.15.2.17.1.2.1.1.24,HPN-ICF-QOS-PROFILE-MIB::hpnicfQoSTrafLmtConformDscp,Integer32,read-create,,current,,If the user chooses remark-dscp value of the hpnicfQoSTrafLmtConformActionType, this object can be used to set the conform dscp value. There are some enumerations as follows: <0-63> Value of DSCP af11 Specify Assured Forwarding 11 service(10) af12 Specify Assured Forwarding 12 service(12) af13 Specify Assured Forwarding 13 service(14) af21 Specify Assured Forwarding 21 service(18) af22 Specify Assured Forwarding 22 service(20) af23 Specify Assured Forwarding 23 service(22) af31 Specify Assured Forwarding 31 service(26) af32 Specify Assured Forwarding 32 service(28) af33 Specify Assured Forwarding 33 service(30) af41 Specify Assured Forwarding 41 service(34) af42 Specify Assured Forwarding 42 service(36) af43 Specify Assured Forwarding 43 service(38) be Specify Best Effort service(0) cs1 Specify Class Selector 1 service(8) cs2 Specify Class Selector 2 service(16) cs3 Specify Class Selector 3 service(24) cs4 Specify Class Selector 4 service(32) cs5 Specify Class Selector 5 service(40) cs6 Specify Class Selector 6 service(48) cs7 Specify Class Selector 7 service(56) ef Specify Expedited Forwarding service(46) 255 indicates invalid value. 
.1.3.6.1.4.1.11.2.14.11.15.2.17.1.2.2,HPN-ICF-QOS-PROFILE-MIB::hpnicfQoSTrafficPriorityTable,,not-accessible,,current,,Traffic priority table is used to remark the IP-precedence, DSCP or COS priority of packets. IP and Link ACL rules can be applied simultaneously, IP and User based ACL rules can not be applied simultaneously, Link and User based ACL rules can not be applied simultaneously. Unused ones is represented with default values. QOS policed service from DSCP mapping table is pre-defined in the hpnicfDscpMapTable in the HPN-ICF-LswQos-MIB. Policed service can decide what kind of QOS service the flow should get by the DSCP vlaue in the packets. Policed service includes remarking new DSCP,new EXP,new 802.1p priority,new local precedence and new drop priority. 
.1.3.6.1.4.1.11.2.14.11.15.2.17.1.2.2.1,HPN-ICF-QOS-PROFILE-MIB::hpnicfQoSTrafficPriorityEntry,,not-accessible,hpnicfQoSTrafPrioProfIndex:hpnicfQoSTrafPrioActionIndex,current,, 
.1.3.6.1.4.1.11.2.14.11.15.2.17.1.2.2.1.1,HPN-ICF-QOS-PROFILE-MIB::hpnicfQoSTrafPrioProfIndex,Integer32,not-accessible,,current,,The index of QoS profile which the traffic-priority action belongs to.
.1.3.6.1.4.1.11.2.14.11.15.2.17.1.2.2.1.2,HPN-ICF-QOS-PROFILE-MIB::hpnicfQoSTrafPrioActionIndex,Integer32,not-accessible,,current,,The index of traffic-priority action.
.1.3.6.1.4.1.11.2.14.11.15.2.17.1.2.2.1.3,HPN-ICF-QOS-PROFILE-MIB::hpnicfQoSTrafPrioDirection,INTEGER,read-create,,current,invalid(0):input(1):ouput(2),The direction of traffic-priority action.
.1.3.6.1.4.1.11.2.14.11.15.2.17.1.2.2.1.4,HPN-ICF-QOS-PROFILE-MIB::hpnicfQoSTrafPrioUserAclNum,Integer32,read-create,,current,,The number of user-based acl group.
.1.3.6.1.4.1.11.2.14.11.15.2.17.1.2.2.1.5,HPN-ICF-QOS-PROFILE-MIB::hpnicfQoSTrafPrioUserAclRule,Integer32,read-create,,current,,The subitem of user-based acl rule.
.1.3.6.1.4.1.11.2.14.11.15.2.17.1.2.2.1.6,HPN-ICF-QOS-PROFILE-MIB::hpnicfQoSTrafPrioIpAclNum,Integer32,read-create,,current,,The number of Ip-based acl group.
.1.3.6.1.4.1.11.2.14.11.15.2.17.1.2.2.1.7,HPN-ICF-QOS-PROFILE-MIB::hpnicfQoSTrafPrioIpAclRule,Integer32,read-create,,current,,The subitem of IP-based acl rule.
.1.3.6.1.4.1.11.2.14.11.15.2.17.1.2.2.1.8,HPN-ICF-QOS-PROFILE-MIB::hpnicfQoSTrafPrioLinkAclNum,Integer32,read-create,,current,,The number of Link-based acl group
.1.3.6.1.4.1.11.2.14.11.15.2.17.1.2.2.1.9,HPN-ICF-QOS-PROFILE-MIB::hpnicfQoSTrafPrioLinkAclRule,Integer32,read-create,,current,,The subitem of Link-based acl rule.
.1.3.6.1.4.1.11.2.14.11.15.2.17.1.2.2.1.10,HPN-ICF-QOS-PROFILE-MIB::hpnicfQoSTrafPrioDscp,Integer32,read-create,,current,,Set new DSCP value of specifed flow. DSCP 255 is used as default value and for get/get-next operation of this node. If the user does not set action as remarking DSCP, then value 255 is returned for get/get-next operation. 
.1.3.6.1.4.1.11.2.14.11.15.2.17.1.2.2.1.11,HPN-ICF-QOS-PROFILE-MIB::hpnicfQoSTrafPrioIpPre,Integer32,read-create,,current,,Set Ip precedence value of specifed flow. Ip precedence 255 is used as default value and for get/get-next operation of this node. If the user does not set action as remarking Ip precedence, then value 255 is returned for get/get-next operation. 
.1.3.6.1.4.1.11.2.14.11.15.2.17.1.2.2.1.12,HPN-ICF-QOS-PROFILE-MIB::hpnicfQoSTrafPrioIpPreFromCos,INTEGER,read-create,,current,true(1):false(2),Set Ip precedence according to vlan priority. False(2)is used as default value and for get/get-next operation of this node. If the user does not set action as remarking Ip precedence from COS, then value 2 is returned for get/get-next operation. 
.1.3.6.1.4.1.11.2.14.11.15.2.17.1.2.2.1.13,HPN-ICF-QOS-PROFILE-MIB::hpnicfQoSTrafPrioCos,Integer32,read-create,,current,,Set vlan priority of specifed flow. COS 255 is used as default value and for get/get-next operation of this node. If the user does not set action as remarking COS, then value 255 is returned for get/get-next operation. 
.1.3.6.1.4.1.11.2.14.11.15.2.17.1.2.2.1.14,HPN-ICF-QOS-PROFILE-MIB::hpnicfQoSTrafPrioCosFromIpPre,INTEGER,read-create,,current,true(1):false(2),Set vlan priority according to IP precedence. False(2)is used as default value and for get/get-next operation of this node. If the user does not set action as remarking COS from Ip precedence, then value 2 is returned for get/get-next operation. 
.1.3.6.1.4.1.11.2.14.11.15.2.17.1.2.2.1.15,HPN-ICF-QOS-PROFILE-MIB::hpnicfQoSTrafPrioLocalPre,Integer32,read-create,,current,,Set local precedence of specifed flow. Local precedence 255 is used as default value and for get/get-next operation of this node. If the user does not set action as remarking local precedence, then value 255 is returned for get/get-next operation. 
.1.3.6.1.4.1.11.2.14.11.15.2.17.1.2.2.1.16,HPN-ICF-QOS-PROFILE-MIB::hpnicfQoSTrafPrioPolicedServiceType,INTEGER,read-create,,current,invalid(0):trust-dscp(2):new-dscp(3):untrusted(4),The service type of policed Priority. Policed Service is not allowed to be set with remarking DSCP,IpPrecedence,IpPrecedenceFromCOS,COS,COSFromIpPrecedence and LocalPrecedence action simultaneously on the same product. Policed service is user-predefined qos policy parameters. trust-dscp(2) means to decide new police service parameters by the DSCP value in the packets. new-dscp(3) means to decide new police service parameters by the new DSCP value set by the user. And a DSCP mapping table should be pre-defined in the hpnicfDscpMapTable in the HPN-ICF-LswQos-MIB. Untrusted(4) means to set all the new DSCP,EXP,COS,Local precedence and Drop priority by the user. 
.1.3.6.1.4.1.11.2.14.11.15.2.17.1.2.2.1.17,HPN-ICF-QOS-PROFILE-MIB::hpnicfQoSTrafPrioPolicedServiceDscp,Integer32,read-create,,current,,The service Dscp of policed Priority
.1.3.6.1.4.1.11.2.14.11.15.2.17.1.2.2.1.18,HPN-ICF-QOS-PROFILE-MIB::hpnicfQoSTrafPrioPolicedServiceExp,Integer32,read-create,,current,,The service Exp of policed Priority
.1.3.6.1.4.1.11.2.14.11.15.2.17.1.2.2.1.19,HPN-ICF-QOS-PROFILE-MIB::hpnicfQoSTrafPrioPolicedServiceCos,Integer32,read-create,,current,,The service cos of policed Priority
.1.3.6.1.4.1.11.2.14.11.15.2.17.1.2.2.1.20,HPN-ICF-QOS-PROFILE-MIB::hpnicfQoSTrafPrioPolicedServiceLoaclPre,Integer32,read-create,,current,,The service local pre of policed Priority
.1.3.6.1.4.1.11.2.14.11.15.2.17.1.2.2.1.21,HPN-ICF-QOS-PROFILE-MIB::hpnicfQoSTrafPrioPolicedServiceDropPriority,Integer32,read-create,,current,,The service drop priority of proliced Priority
.1.3.6.1.4.1.11.2.14.11.15.2.17.1.2.2.1.22,HPN-ICF-QOS-PROFILE-MIB::hpnicfQoSTrafPrioRowStatus,INTEGER,read-create,,current,active(1):notInService(2):notReady(3):createAndGo(4):createAndWait(5):destroy(6),RowStatus,Now support three state:CreateAndGo,Active,Destroy.
.1.3.6.1.4.1.11.2.14.11.15.2.17.1.2.3,HPN-ICF-QOS-PROFILE-MIB::hpnicfQoSTrafficFilterTable,,not-accessible,,current,,Traffic filter table is used to deny or permit packets. IP and Link ACL rules can be applied simultaneously, IP and User based ACL rules can not be applied simultaneously, Link and User based ACL rules can not be applied simultaneously. Unused ones is represented with default values. To deny or permit packets,the ACL rules should be defined in hpnicfAcl table. The 'deny' or 'permit' action should be defined with ACL rules. In this table,a predefined ACL rules can be referenced in a specified QOS profile group. 'Direction' means the ACL rules can be applied to the inbound or outbound packets. 
.1.3.6.1.4.1.11.2.14.11.15.2.17.1.2.3.1,HPN-ICF-QOS-PROFILE-MIB::hpnicfQoSTrafficFilterEntry,,not-accessible,hpnicfQoSTrafFilterProfIndex:hpnicfQoSTrafFilterActionIndex,current,, 
.1.3.6.1.4.1.11.2.14.11.15.2.17.1.2.3.1.1,HPN-ICF-QOS-PROFILE-MIB::hpnicfQoSTrafFilterProfIndex,Integer32,not-accessible,,current,,The index of QoS profile which the traffic-filter action belongs to.
.1.3.6.1.4.1.11.2.14.11.15.2.17.1.2.3.1.2,HPN-ICF-QOS-PROFILE-MIB::hpnicfQoSTrafFilterActionIndex,Integer32,not-accessible,,current,,The index of traffic-filter action.
.1.3.6.1.4.1.11.2.14.11.15.2.17.1.2.3.1.3,HPN-ICF-QOS-PROFILE-MIB::hpnicfQoSTrafFilterDirection,INTEGER,read-create,,current,invalid(0):input(1):ouput(2),The direction of traffic-filter action.
.1.3.6.1.4.1.11.2.14.11.15.2.17.1.2.3.1.4,HPN-ICF-QOS-PROFILE-MIB::hpnicfQoSTrafFilterUserAclNum,Integer32,read-create,,current,,The number of user-based acl group.
.1.3.6.1.4.1.11.2.14.11.15.2.17.1.2.3.1.5,HPN-ICF-QOS-PROFILE-MIB::hpnicfQoSTrafFilterUserAclRule,Integer32,read-create,,current,,The subitem of user-based acl rule.
.1.3.6.1.4.1.11.2.14.11.15.2.17.1.2.3.1.6,HPN-ICF-QOS-PROFILE-MIB::hpnicfQoSTrafFilterIpAclNum,Integer32,read-create,,current,,The number of Ip-based acl group.
.1.3.6.1.4.1.11.2.14.11.15.2.17.1.2.3.1.7,HPN-ICF-QOS-PROFILE-MIB::hpnicfQoSTrafFilterIpAclRule,Integer32,read-create,,current,,The subitem of IP-based acl rule.
.1.3.6.1.4.1.11.2.14.11.15.2.17.1.2.3.1.8,HPN-ICF-QOS-PROFILE-MIB::hpnicfQoSTrafFilterLinkAclNum,Integer32,read-create,,current,,The number of Link-based acl group
.1.3.6.1.4.1.11.2.14.11.15.2.17.1.2.3.1.9,HPN-ICF-QOS-PROFILE-MIB::hpnicfQoSTrafFilterLinkAclRule,Integer32,read-create,,current,,The subitem of Link-based acl rule.
.1.3.6.1.4.1.11.2.14.11.15.2.17.1.2.3.1.10,HPN-ICF-QOS-PROFILE-MIB::hpnicfQoSTrafFilterRowStatus,INTEGER,read-create,,current,active(1):notInService(2):notReady(3):createAndGo(4):createAndWait(5):destroy(6),RowStatus,Now support three state:CreateAndGo,Active,Destroy.
.1.3.6.1.4.1.11.2.14.11.15.2.17.1.3,HPN-ICF-QOS-PROFILE-MIB::hpnicfQoSProfPortMapping,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.2.17.1.3.1,HPN-ICF-QOS-PROFILE-MIB::hpnicfQoSProfPortMappingTable,,not-accessible,,current,,Port mapping table is used to apply the qos profile to the port. If a qos profile is applied to the port, then the port will have an entry in the table.
.1.3.6.1.4.1.11.2.14.11.15.2.17.1.3.1.1,HPN-ICF-QOS-PROFILE-MIB::hpnicfQoSProfPortMappingEntry,,not-accessible,hpnicfQoSProfPortMappingIfIndex:hpnicfQoSProfPortMappingProfIndex,current,, 
.1.3.6.1.4.1.11.2.14.11.15.2.17.1.3.1.1.1,HPN-ICF-QOS-PROFILE-MIB::hpnicfQoSProfPortMappingIfIndex,Integer32,not-accessible,,current,,The ifindex which the specified QoS profile group is applied to.
.1.3.6.1.4.1.11.2.14.11.15.2.17.1.3.1.1.2,HPN-ICF-QOS-PROFILE-MIB::hpnicfQoSProfPortMappingProfIndex,Integer32,not-accessible,,current,,The index of specified QoS profile group.
.1.3.6.1.4.1.11.2.14.11.15.2.17.1.3.1.1.3,HPN-ICF-QOS-PROFILE-MIB::hpnicfQoSProfPortMappingRowStatus,INTEGER,read-create,,current,active(1):notInService(2):notReady(3):createAndGo(4):createAndWait(5):destroy(6),RowStatus,Now support three state:CreateAndGo,Active,Destroy.
.1.3.6.1.4.1.11.2.14.11.15.2.17.1.3.2,HPN-ICF-QOS-PROFILE-MIB::hpnicfQoSProfPortMappingModeTable,,not-accessible,,current,,Port mapping mode table is used to set mapping mode of the port. When a qos profile is applied to a port, the profile can have two working ways: 1)The profile is the same for all the users connected to the port; 2)The profile can be different for different users connected to the port; Port-based mode means the profile is the same for all the users. User-based mode means the profile is different for different users. Default value is port-based.
.1.3.6.1.4.1.11.2.14.11.15.2.17.1.3.2.1,HPN-ICF-QOS-PROFILE-MIB::hpnicfQoSProfPortMappingModeEntry,,not-accessible,hpnicfQoSProfPortMappingModeIfIndex,current,, 
.1.3.6.1.4.1.11.2.14.11.15.2.17.1.3.2.1.1,HPN-ICF-QOS-PROFILE-MIB::hpnicfQoSProfPortMappingModeIfIndex,Integer32,not-accessible,,current,,The ifindex which the QoS profile mapping mode is applied to.
.1.3.6.1.4.1.11.2.14.11.15.2.17.1.3.2.1.2,HPN-ICF-QOS-PROFILE-MIB::hpnicfQoSProfPortMappingMode,INTEGER,read-write,,current,user-based(1):port-based(2),The QoS profile mapping mode of specifed port.
.1.3.6.1.4.1.11.2.14.11.15.2.17.1.3.3,HPN-ICF-QOS-PROFILE-MIB::hpnicfQoSProfDynPortMappingTable,,not-accessible,,current,,Dynamic port mapping table is used to get user' port,MAC address,IP address,VLAN ID and user-specified qos profiles. Network managers can allocate different QOS profile groups to different users. Once the user is on line, then the user-specified QOS profiles will be dynamically applied to the port the user connects. Each port can have different groups of users simultaneously connected. Each group of users can have assiociation with multiple QOS profiles simultaneously. So the user's port,MAC address,IP address and VLAN ID will replace the source information in the ACL rules refered in the QOS profiles. Once the user is off line, then the user-specified QOS profiles will be dynamically deleted from the port the user connects.
.1.3.6.1.4.1.11.2.14.11.15.2.17.1.3.3.1,HPN-ICF-QOS-PROFILE-MIB::hpnicfQoSProfDynPortMappingEntry,,not-accessible,hpnicfQoSProfDynPortMappingIfIndex:hpnicfQoSProfDynPortMappingUserSrcMAC,current,, 
.1.3.6.1.4.1.11.2.14.11.15.2.17.1.3.3.1.1,HPN-ICF-QOS-PROFILE-MIB::hpnicfQoSProfDynPortMappingIfIndex,Integer32,not-accessible,,current,,if index of the port user profile is applied.
.1.3.6.1.4.1.11.2.14.11.15.2.17.1.3.3.1.2,HPN-ICF-QOS-PROFILE-MIB::hpnicfQoSProfDynPortMappingUserSrcMAC,OCTET,not-accessible,,current,,User sourc MAC address.
.1.3.6.1.4.1.11.2.14.11.15.2.17.1.3.3.1.3,HPN-ICF-QOS-PROFILE-MIB::hpnicfQoSProfDynPortMappingUserName,OCTET,read-only,,current,,User name.
.1.3.6.1.4.1.11.2.14.11.15.2.17.1.3.3.1.4,HPN-ICF-QOS-PROFILE-MIB::hpnicfQoSProfDynPortMappingUserIPAddr,IpAddress,read-only,,current,,User IP address
.1.3.6.1.4.1.11.2.14.11.15.2.17.1.3.3.1.5,HPN-ICF-QOS-PROFILE-MIB::hpnicfQoSProfDynPortMappingUserVLANID,Integer32,read-only,,current,,User VLAN ID.
.1.3.6.1.4.1.11.2.14.11.15.2.17.1.3.3.1.6,HPN-ICF-QOS-PROFILE-MIB::hpnicfQoSProfDynPortMappingUserProfName,OCTET,read-only,,current,,User profile name.
.1.3.6.1.4.1.11.2.14.11.15.2.17.2,HPN-ICF-QOS-PROFILE-MIB::hpnicfQoSProfPortMappingTraps,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.2.17.2.1,HPN-ICF-QOS-PROFILE-MIB::hpnicfQoSProfPortMappingError,,,,,,An hpnicfQoSProfPortMappingError notification is generated when a qos profile fails to be applied on the port.
.1.3.6.1.4.1.11.2.14.11.15.2.17.3,HPN-ICF-QOS-PROFILE-MIB::hpnicfQoSProfMibConformance,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.2.17.3.1,HPN-ICF-QOS-PROFILE-MIB::hpnicfQoSProfMibCompliances,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.2.17.3.1.1,HPN-ICF-QOS-PROFILE-MIB::hpnicfQoSProfMibCompliance,,,,,,The compliance statement for QoS Profile MIB.
.1.3.6.1.4.1.11.2.14.11.15.2.17.3.2,HPN-ICF-QOS-PROFILE-MIB::hpnicfQoSProfMibGroups,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.2.17.3.2.1,HPN-ICF-QOS-PROFILE-MIB::hpnicfQoSProfGroup,,,,,,Included table: hpnicfQoSProfTable.
.1.3.6.1.4.1.11.2.14.11.15.2.17.3.2.2,HPN-ICF-QOS-PROFILE-MIB::hpnicfQoSActionGroup,,,,,,Included table: 1)hpnicfQoSTrafficLimitTable. 2)hpnicfQoSTrafficPriorityTable. 3)hpnicfQoSTrafficFilterTable 
.1.3.6.1.4.1.11.2.14.11.15.2.17.3.2.3,HPN-ICF-QOS-PROFILE-MIB::hpnicfQoSProfPortMappingGroup,,,,,,Included tables: 1)hpnicfQoSProfPortMappingTable. 2)hpnicfQoSProfPortMappingModeTable. 3)hpnicfQoSProfDynPortMappingTable. 
.1.3.6.1.4.1.11.2.14.11.15.2.17.3.2.4,HPN-ICF-QOS-PROFILE-MIB::hpnicfQoSProfPortMappingTrapsGroup,,,,,,Included: hpnicfQoSProfPortMappingTraps.
.1.3.6.1.4.1.11.2.14.11.15.2.18,HPN-ICF-OID-MIB::hpnicfNat,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.2.18.1,HPN-ICF-NAT-MIB::hpnicfNATGlobalVars,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.2.18.1.1,HPN-ICF-NAT-MIB::hpnicfNATClearSession,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.2.18.1.1.1,HPN-ICF-NAT-MIB::hpnicfNATClearSessionSlotNo,INTEGER,read-write,,current,,The number of NAT board in which administrator wants to clear data of the session. In router, the value is 255 because no NAT board in it. This node only supports 'set' operation. The return value of 'get' operation is meaningless.
.1.3.6.1.4.1.11.2.14.11.15.2.18.1.2,HPN-ICF-NAT-MIB::hpnicfNATBLConnectLimitPara,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.2.18.1.2.1,HPN-ICF-NAT-MIB::hpnicfNATBLConnectHighValue,INTEGER,read-write,,current,,The maximal connection amount. If the connection amount exceeds the value, the IP address will be added into blacklist. The IP address will not be removed from blacklist until the connection amount is less than the minimal connection amount.
.1.3.6.1.4.1.11.2.14.11.15.2.18.1.2.2,HPN-ICF-NAT-MIB::hpnicfNATBLConnectLowValue,INTEGER,read-write,,current,,The minimal connection amount.
.1.3.6.1.4.1.11.2.14.11.15.2.18.1.2.3,HPN-ICF-NAT-MIB::hpnicfNATBLConnectHighRate,INTEGER,read-write,,current,,The maximal connection rate(in second). If the connection rate exceed the value, the IP address will be added into blacklist. The IP address will not be removed from blacklist until the connection rate is less than the minimal connection rate.
.1.3.6.1.4.1.11.2.14.11.15.2.18.1.2.4,HPN-ICF-NAT-MIB::hpnicfNATBLConnectLowRate,INTEGER,read-write,,current,,The minimal connection rate(in second).
.1.3.6.1.4.1.11.2.14.11.15.2.18.1.2.5,HPN-ICF-NAT-MIB::hpnicfNATBLSpecialConnectHighRate,INTEGER,read-write,,current,,The maximal special connection rate(in second). When administrator wants to control the speed of connection, he can selects the connection speed rate or special connection rate.
.1.3.6.1.4.1.11.2.14.11.15.2.18.1.2.6,HPN-ICF-NAT-MIB::hpnicfNATBLSpecialConnectLowRate,INTEGER,read-write,,current,,The minimal special connection rate(in second).
.1.3.6.1.4.1.11.2.14.11.15.2.18.1.3,HPN-ICF-NAT-MIB::hpnicfNATBLCtrlEnable,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.2.18.1.3.1,HPN-ICF-NAT-MIB::hpnicfNATBLConnectSumEnable,INTEGER,read-write,,current,enable(1):disable(2),Enable or disable the connection amount control.
.1.3.6.1.4.1.11.2.14.11.15.2.18.1.3.2,HPN-ICF-NAT-MIB::hpnicfNATBLConnectRateEnable,INTEGER,read-write,,current,enable(1):disable(2),Enable or disable the connection rate control.
.1.3.6.1.4.1.11.2.14.11.15.2.18.1.4,HPN-ICF-NAT-MIB::hpnicfNATNPTimer,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.2.18.1.4.1,HPN-ICF-NAT-MIB::hpnicfNATNPAgingTime,INTEGER,read-write,,current,fast(1):slow(2),There are two kinds of aging time in NP. One is fast and the other is slow. Administrator can select one or other. The defalult is fast.
.1.3.6.1.4.1.11.2.14.11.15.2.18.2,HPN-ICF-NAT-MIB::hpnicfNATMibObjects,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.2.18.2.1,HPN-ICF-NAT-MIB::hpnicfNATPoolInfoTable,,not-accessible,,current,,NAT address pool table : The address in the pool is the IP address in the global network. The pool can span 255 IP addresses.All address pools configured by administrator are recorded in this table.
.1.3.6.1.4.1.11.2.14.11.15.2.18.2.1.1,HPN-ICF-NAT-MIB::hpnicfNATPoolInfoEntry,,not-accessible,hpnicfNATPoolIdx,current,,The entry of NAT address pool table.
.1.3.6.1.4.1.11.2.14.11.15.2.18.2.1.1.1,HPN-ICF-NAT-MIB::hpnicfNATPoolIdx,Integer32,not-accessible,,current,,Index of the address pool: The index uniquely indicates the address pool in the system, and its range is from 1 to 320. 
.1.3.6.1.4.1.11.2.14.11.15.2.18.2.1.1.2,HPN-ICF-NAT-MIB::hpnicfNATPoolStartIpAddr,IpAddress,read-create,,current,,The start IP address of address pool: It must be less than or equal to the end IP address.
.1.3.6.1.4.1.11.2.14.11.15.2.18.2.1.1.3,HPN-ICF-NAT-MIB::hpnicfNATPoolEndIpAddr,IpAddress,read-create,,current,,The end IP address of address pool: It must be more than or equal to the start IP address.
.1.3.6.1.4.1.11.2.14.11.15.2.18.2.1.1.4,HPN-ICF-NAT-MIB::hpnicfNATPoolSlotNo,INTEGER,read-create,,current,,The number of NAT board to which the address pool is bound. The address translation is processed by this NAT board . The relation between address pool and slotNo is n:1. When the address pool is not bound to the NAT board,the value is 255. 
.1.3.6.1.4.1.11.2.14.11.15.2.18.2.1.1.5,HPN-ICF-NAT-MIB::hpnicfNATPoolRefCounter,Integer32,read-create,,current,,The counter of reference. A address pool can be associated with more than one ACL and the counter of reference is recorded in this field. When the address pool is not associated with ACL, the value is 0.
.1.3.6.1.4.1.11.2.14.11.15.2.18.2.1.1.6,HPN-ICF-NAT-MIB::hpnicfNATPoolRowStatus,INTEGER,read-create,,current,active(1):notInService(2):notReady(3):createAndGo(4):createAndWait(5):destroy(6),Only support 'destroy' and 'createAndGo'. If hpnicfNATPoolIdx, hpnicfNATPoolStartIpAddr and hpnicfNATPoolEndIpAddr were provided correctly, its value is changed 'active'.
.1.3.6.1.4.1.11.2.14.11.15.2.18.2.2,HPN-ICF-NAT-MIB::hpnicfNATOutboundTable,,not-accessible,,current,,NAT out bound table: through associating ACL number, address pool with NAT board, administrator can designate which inside IP address can be translated to global IP address in the pool and the translation is processed by which NAT board.
.1.3.6.1.4.1.11.2.14.11.15.2.18.2.2.1,HPN-ICF-NAT-MIB::hpnicfNATOutboundEntry,,not-accessible,ifIndex:hpnicfNATOutboundAclNo,current,,The entry of NAT out bound table.
.1.3.6.1.4.1.11.2.14.11.15.2.18.2.2.1.1,HPN-ICF-NAT-MIB::hpnicfNATOutboundAclNo,INTEGER,not-accessible,,current,,The number of ACL(Access Control List). When the packet accords with the rule in the ACL, its source IP address will be translated to IP address in Address pool.
.1.3.6.1.4.1.11.2.14.11.15.2.18.2.2.1.2,HPN-ICF-NAT-MIB::hpnicfNATOutboundPoolIdx,INTEGER,read-create,,current,,The index of address pool in hpnicfNATPoolInfoTable. when administrator doesn't use the address pool and use the IP address of the interface as the address of global network, the value is 2147483647.
.1.3.6.1.4.1.11.2.14.11.15.2.18.2.2.1.3,HPN-ICF-NAT-MIB::hpnicfNATOutboundIsNoPat,INTEGER,read-create,,current,true(1):false(2),Whether to use no pat manner. The translation of no pat is that the translation doesn't use the port information of packet.
.1.3.6.1.4.1.11.2.14.11.15.2.18.2.2.1.4,HPN-ICF-NAT-MIB::hpnicfNATOutboundSlotNo,Integer32,read-create,,current,,The number of NAT board. In router, the value is 255 because no NAT board in it.
.1.3.6.1.4.1.11.2.14.11.15.2.18.2.2.1.5,HPN-ICF-NAT-MIB::hpnicfNATOutboundRowStatus,INTEGER,read-create,,current,active(1):notInService(2):notReady(3):createAndGo(4):createAndWait(5):destroy(6),Only support 'destroy' and 'createAndGo'. If hpnicfNATOutboundAclNo or hpnicfNATOutboundAclNo and hpnicfNATOutboundPoolIdx were provided correctly, its value is changed 'active'.
.1.3.6.1.4.1.11.2.14.11.15.2.18.2.3,HPN-ICF-NAT-MIB::hpnicfNATServerTable,,not-accessible,,current,,NAT inside Server Table. Administrator can configure server in the private network which can provide service for people in the public network. The translation map is : (InsideIP , InsidePort--> GlobalIP, GlobalPort ) (InsideIP + 1 , InsidePort--> GlobalIP, GlobalPort + 1) (InsideIP + 2 , InsidePort--> GlobalIP, GlobalPort + 2) ... ... ... (InsideIP+n(=InsideIP2),InsidePort--> GlobalIP,GlobalPort+n(=GlobalPort2)) 
.1.3.6.1.4.1.11.2.14.11.15.2.18.2.3.1,HPN-ICF-NAT-MIB::hpnicfNATServerEntry,,not-accessible,ifIndex:hpnicfNATServerProType:hpnicfNATServerGlobalIP:hpnicfNATServerStartGlobalPort:hpnicfNATServerVpnIndex,current,,The entry of NAT inside server table.
.1.3.6.1.4.1.11.2.14.11.15.2.18.2.3.1.1,HPN-ICF-NAT-MIB::hpnicfNATServerProType,INTEGER,not-accessible,,current,,The type of protocol: icmp(1), tcp(6), udp(17) and others.
.1.3.6.1.4.1.11.2.14.11.15.2.18.2.3.1.2,HPN-ICF-NAT-MIB::hpnicfNATServerGlobalIP,IpAddress,not-accessible,,current,,The global IP address of Inside Server.
.1.3.6.1.4.1.11.2.14.11.15.2.18.2.3.1.3,HPN-ICF-NAT-MIB::hpnicfNATServerStartGlobalPort,INTEGER,not-accessible,,current,,The start global port of Inside Server. When the port need not be configured, the value is 0.
.1.3.6.1.4.1.11.2.14.11.15.2.18.2.3.1.4,HPN-ICF-NAT-MIB::hpnicfNATServerEndGlobalPort,INTEGER,read-create,,current,,The end global port of Inside Server. When administrator doesn't configure a series of inside server, the value is 0. If the value is not zero, the value of (GlobalPort2-GlobalPort) must be equal to (InsideIP2 - InsideIP).
.1.3.6.1.4.1.11.2.14.11.15.2.18.2.3.1.5,HPN-ICF-NAT-MIB::hpnicfNATServerStartInsideIP,IpAddress,read-create,,current,,The start private IP address of Inside Server.
.1.3.6.1.4.1.11.2.14.11.15.2.18.2.3.1.6,HPN-ICF-NAT-MIB::hpnicfNATServerEndInsideIP,IpAddress,read-create,,current,,The end private IP address of Inside Server. When administrator doesn't configure a series of inside server, the value is 0.0.0.0.
.1.3.6.1.4.1.11.2.14.11.15.2.18.2.3.1.7,HPN-ICF-NAT-MIB::hpnicfNATServerInsidePort,INTEGER,read-create,,current,,The private port of Inside Server.
.1.3.6.1.4.1.11.2.14.11.15.2.18.2.3.1.8,HPN-ICF-NAT-MIB::hpnicfNATServerSlotNo,Integer32,read-create,,current,,The number of NAT board. In router, the value is 255 because no NAT board in it.
.1.3.6.1.4.1.11.2.14.11.15.2.18.2.3.1.10,HPN-ICF-NAT-MIB::hpnicfNATServerVpnIndex,Integer32,not-accessible,,current,,The VPN index of server.
.1.3.6.1.4.1.11.2.14.11.15.2.18.2.3.1.11,HPN-ICF-NAT-MIB::hpnicfNATServerAclNumber,Integer32,read-create,,current,,Number of basic or advanced acl.
.1.3.6.1.4.1.11.2.14.11.15.2.18.2.3.1.12,HPN-ICF-NAT-MIB::hpnicfNATServerRowStatus,INTEGER,read-create,,current,active(1):notInService(2):notReady(3):createAndGo(4):createAndWait(5):destroy(6),Only support 'destroy' and 'createAndGo'. If hpnicfNATServerProType, hpnicfNATServerGlobalIP, hpnicfNATServerGlobalPort and hpnicfNATServerInsideIP were provided correctly, its value is changed 'active'.
.1.3.6.1.4.1.11.2.14.11.15.2.18.2.4,HPN-ICF-NAT-MIB::hpnicfNATTimeOutTable,,not-accessible,,current,,NAT Time out Table. When a connection is established, if there are not any actives in this connection between the time, it will be disconnected.
.1.3.6.1.4.1.11.2.14.11.15.2.18.2.4.1,HPN-ICF-NAT-MIB::hpnicfNATTimeOutEntry,,not-accessible,hpnicfNATTimeOutProtocol,current,,The entry of NAT Time out Table.
.1.3.6.1.4.1.11.2.14.11.15.2.18.2.4.1.1,HPN-ICF-NAT-MIB::hpnicfNATTimeOutProtocol,INTEGER,not-accessible,,current,tcp(1):udp(2):icmp(3):pptp(4):dns(5):tcpFin(6):tcpSyn(7):ftpCtrl(8):ftpData(9),The type of protocol.
.1.3.6.1.4.1.11.2.14.11.15.2.18.2.4.1.2,HPN-ICF-NAT-MIB::hpnicfNATTimeOutTimeValue,INTEGER,read-write,,current,,The time of time out.
.1.3.6.1.4.1.11.2.14.11.15.2.18.2.5,HPN-ICF-NAT-MIB::hpnicfNATBLEnableTable,,not-accessible,,current,,NAT blacklist function Enable Table. In this table, administrator can decide whether to start the function of blacklist in the NAT board. When the function of blacklist can't be set for a NAT board, the number of NAT board is 256.
.1.3.6.1.4.1.11.2.14.11.15.2.18.2.5.1,HPN-ICF-NAT-MIB::hpnicfNATBLEnableEntry,,not-accessible,hpnicfNATBLEnableSlotNo,current,,The entry of NAT blacklist Enable Table.
.1.3.6.1.4.1.11.2.14.11.15.2.18.2.5.1.1,HPN-ICF-NAT-MIB::hpnicfNATBLEnableSlotNo,Integer32,not-accessible,,current,,The number of NAT board. When the function of blacklist can't be set for a NAT board, the value is 255.
.1.3.6.1.4.1.11.2.14.11.15.2.18.2.5.1.2,HPN-ICF-NAT-MIB::hpnicfNATBLEnable,INTEGER,read-write,,current,enable(1):disable(2),Start or stop of function of balcklist.
.1.3.6.1.4.1.11.2.14.11.15.2.18.2.6,HPN-ICF-NAT-MIB::hpnicfNATBLIPConnectLimitParaTable,,not-accessible,,current,,The table of connection control of special IP address. In this table, administrator can decide to adopt which manner to control the connection which IP address is the special IP address.
.1.3.6.1.4.1.11.2.14.11.15.2.18.2.6.1,HPN-ICF-NAT-MIB::hpnicfNATBLIPConnectLimitParaEntry,,not-accessible,hpnicfNATBLIPConnectLimitParaIP,current,,The entry of the table of connection control of special IP address.
.1.3.6.1.4.1.11.2.14.11.15.2.18.2.6.1.1,HPN-ICF-NAT-MIB::hpnicfNATBLIPConnectLimitParaIP,IpAddress,not-accessible,,current,,The special IP address. The IP is private IP address.
.1.3.6.1.4.1.11.2.14.11.15.2.18.2.6.1.2,HPN-ICF-NAT-MIB::hpnicfNATBLIPConnectHighValue,INTEGER,read-create,,current,,The maximal connection amount. It must be more than the minimal connection amount.
.1.3.6.1.4.1.11.2.14.11.15.2.18.2.6.1.3,HPN-ICF-NAT-MIB::hpnicfNATBLIPConnectLowValue,INTEGER,read-create,,current,,The minimal connection amount. It must be less than the maximal connection amount.
.1.3.6.1.4.1.11.2.14.11.15.2.18.2.6.1.4,HPN-ICF-NAT-MIB::hpnicfNATBLIPUseSpecialConnectRate,INTEGER,read-create,,current,true(1):false(2),Whether to use the special connection rate control.
.1.3.6.1.4.1.11.2.14.11.15.2.18.2.6.1.5,HPN-ICF-NAT-MIB::hpnicfNATBLIPConnectLimitRowStatus,INTEGER,read-create,,current,active(1):notInService(2):notReady(3):createAndGo(4):createAndWait(5):destroy(6),Only support 'destroy' and 'createAndGo'. If hpnicfNATBLIPConnectHighValue, hpnicfNATBLIPConnectLowValue and hpnicfNATBLIPUseSpecialConnectRate were provided correctly, its value is changed 'active'.
.1.3.6.1.4.1.11.2.14.11.15.2.18.2.7,HPN-ICF-NAT-MIB::hpnicfNATBLManagerTable,,not-accessible,,current,,The management table of blacklist. The table doesn't support 'getnext' operation.
.1.3.6.1.4.1.11.2.14.11.15.2.18.2.7.1,HPN-ICF-NAT-MIB::hpnicfNATBLManagerEntry,,not-accessible,hpnicfNATBLIpAdress:hpnicfNATBLSlotNo,current,,The entry of management table of blacklist.
.1.3.6.1.4.1.11.2.14.11.15.2.18.2.7.1.1,HPN-ICF-NAT-MIB::hpnicfNATBLIpAdress,IpAddress,not-accessible,,current,,The IP address of entry of blacklist.
.1.3.6.1.4.1.11.2.14.11.15.2.18.2.7.1.2,HPN-ICF-NAT-MIB::hpnicfNATBLSlotNo,INTEGER,not-accessible,,current,,The number of NAT board.
.1.3.6.1.4.1.11.2.14.11.15.2.18.2.7.1.3,HPN-ICF-NAT-MIB::hpnicfNATBLConSum,Integer32,read-only,,current,,The connection amount.
.1.3.6.1.4.1.11.2.14.11.15.2.18.2.7.1.4,HPN-ICF-NAT-MIB::hpnicfNATBLConSpd,INTEGER,read-only,,current,red(1):yellow(2):green(3),The state of connection rate: red(1) : the connection rate is above the upper limit. yellow(2): the connection rate is between the upper and lower limit. green(3) : the conneciton rate is below the lower limit.
.1.3.6.1.4.1.11.2.14.11.15.2.18.2.8,HPN-ICF-NAT-MIB::hpnicfNATStatTable,,not-accessible,,current,,The statistics information table of NAT module.
.1.3.6.1.4.1.11.2.14.11.15.2.18.2.8.1,HPN-ICF-NAT-MIB::hpnicfNATStatEntry,,not-accessible,hpnicfNATStatNATBoardNo,current,,The entry of statistics information table of NAT module.
.1.3.6.1.4.1.11.2.14.11.15.2.18.2.8.1.1,HPN-ICF-NAT-MIB::hpnicfNATStatNATBoardNo,Integer32,not-accessible,,current,,The number of NAT board. In router, the value is 255 because no NAT board in it.
.1.3.6.1.4.1.11.2.14.11.15.2.18.2.8.1.2,HPN-ICF-NAT-MIB::hpnicfNATStatActiveTblCount,Counter32,read-only,,current,,Active PAT session count In software.
.1.3.6.1.4.1.11.2.14.11.15.2.18.2.8.1.3,HPN-ICF-NAT-MIB::hpnicfNATStatActiveTblCountInNP,Counter32,read-only,,current,,Active PAT session count In NP.
.1.3.6.1.4.1.11.2.14.11.15.2.18.2.8.1.4,HPN-ICF-NAT-MIB::hpnicfNATStatActiveNatTblCount,Counter32,read-only,,current,,Active NO-PAT session count.
.1.3.6.1.4.1.11.2.14.11.15.2.18.2.8.1.5,HPN-ICF-NAT-MIB::hpnicfNATStatActiveSvrTblCount,Counter32,read-only,,current,,Active SERVER session count.
.1.3.6.1.4.1.11.2.14.11.15.2.18.2.8.1.6,HPN-ICF-NAT-MIB::hpnicfNATStatActivePoolTblCount,Counter32,read-only,,current,,Active address pool session count.
.1.3.6.1.4.1.11.2.14.11.15.2.18.2.8.1.7,HPN-ICF-NAT-MIB::hpnicfNATStatNumOfUsedPort,Counter32,read-only,,current,,The number of used port in NP.
.1.3.6.1.4.1.11.2.14.11.15.2.18.2.8.1.8,HPN-ICF-NAT-MIB::hpnicfNATStatNumOfGoodPkt,Counter32,read-only,,current,,The number of good packet in NP.
.1.3.6.1.4.1.11.2.14.11.15.2.18.2.8.1.9,HPN-ICF-NAT-MIB::hpnicfNATStatNumOfBadPkt,Counter32,read-only,,current,,The number of bad packet in NP.
.1.3.6.1.4.1.11.2.14.11.15.2.18.2.8.1.10,HPN-ICF-NAT-MIB::hpnicfNATStaticSessionCount,Integer32,read-only,,current,,Active STATIC session count.
.1.3.6.1.4.1.11.2.14.11.15.2.18.2.8.1.11,HPN-ICF-NAT-MIB::hpnicfNATFragmentSessionCount,Integer32,read-only,,current,,Active fragment packet session count.
.1.3.6.1.4.1.11.2.14.11.15.2.18.2.8.1.12,HPN-ICF-NAT-MIB::hpnicfNATSequenceSessionCount,Integer32,read-only,,current,,Active session table count hash by private IP.
.1.3.6.1.4.1.11.2.14.11.15.2.18.2.8.1.13,HPN-ICF-NAT-MIB::hpnicfNATLogCount,Integer32,read-only,,current,,Buffered Nat LOG table count.
.1.3.6.1.4.1.11.2.14.11.15.2.18.2.9,HPN-ICF-NAT-MIB::hpnicfNATSessionTable,,not-accessible,,current,,The nat session information table. There is the address translation information in the table. The sketch map of connection is pc1(private Net)------------------>NAT Device ------------------>Server(public Net) InsideIP, InsidePort---->translating to GlobalIP, GlobalPort------>PeerIP, PeerPort. 
.1.3.6.1.4.1.11.2.14.11.15.2.18.2.9.1,HPN-ICF-NAT-MIB::hpnicfNATSessionEntry,,not-accessible,hpnicfNATSessionHashNumber:hpnicfNATSessionProtocol:hpnicfNATSessionInsideIP:hpnicfNATSessionInsidePort:hpnicfNATSessionPeerIP:hpnicfNATSessionPeerPort:hpnicfNATSessionVpnIndex,current,,The entry of session information table.
.1.3.6.1.4.1.11.2.14.11.15.2.18.2.9.1.1,HPN-ICF-NAT-MIB::hpnicfNATSessionHashNumber,Integer32,not-accessible,,current,,The row number of the hash table.
.1.3.6.1.4.1.11.2.14.11.15.2.18.2.9.1.2,HPN-ICF-NAT-MIB::hpnicfNATSessionProtocol,INTEGER,not-accessible,,current,,The protocol type of session.
.1.3.6.1.4.1.11.2.14.11.15.2.18.2.9.1.3,HPN-ICF-NAT-MIB::hpnicfNATSessionGlobalIP,IpAddress,read-only,,current,,The global IP of session. 
.1.3.6.1.4.1.11.2.14.11.15.2.18.2.9.1.4,HPN-ICF-NAT-MIB::hpnicfNATSessionGlobalPort,Integer32,read-only,,current,,The global port of session.
.1.3.6.1.4.1.11.2.14.11.15.2.18.2.9.1.5,HPN-ICF-NAT-MIB::hpnicfNATSessionInsideIP,IpAddress,not-accessible,,current,,The Inside IP of session.
.1.3.6.1.4.1.11.2.14.11.15.2.18.2.9.1.6,HPN-ICF-NAT-MIB::hpnicfNATSessionInsidePort,Integer32,not-accessible,,current,,The Inside port of session.
.1.3.6.1.4.1.11.2.14.11.15.2.18.2.9.1.7,HPN-ICF-NAT-MIB::hpnicfNATSessionPeerIP,IpAddress,not-accessible,,current,,The peer IP of session.
.1.3.6.1.4.1.11.2.14.11.15.2.18.2.9.1.8,HPN-ICF-NAT-MIB::hpnicfNATSessionPeerPort,Integer32,not-accessible,,current,,The peer port of session.
.1.3.6.1.4.1.11.2.14.11.15.2.18.2.9.1.9,HPN-ICF-NAT-MIB::hpnicfNATSessionVpnIndex,Integer32,not-accessible,,current,,The VPN index of session.
.1.3.6.1.4.1.11.2.14.11.15.2.18.2.9.1.10,HPN-ICF-NAT-MIB::hpnicfNATSessionTTL,Integer32,read-only,,current,,The TTL of session.
.1.3.6.1.4.1.11.2.14.11.15.2.18.2.9.1.11,HPN-ICF-NAT-MIB::hpnicfNATSessionStatus,Integer32,read-only,,current,,The status of session.
.1.3.6.1.4.1.11.2.14.11.15.2.18.2.9.1.12,HPN-ICF-NAT-MIB::hpnicfNATSessionLeftTime,TimeTicks,read-only,,current,,The Left time of session.
.1.3.6.1.4.1.11.2.14.11.15.2.18.2.10,HPN-ICF-NAT-MIB::hpnicfNATStaticConfTable,,not-accessible,,current,,Static Nat configuration table.
.1.3.6.1.4.1.11.2.14.11.15.2.18.2.10.1,HPN-ICF-NAT-MIB::hpnicfNATStaticConfEntry,,not-accessible,hpnicfNATStaticInsideIp,current,,Configure static Nat.
.1.3.6.1.4.1.11.2.14.11.15.2.18.2.10.1.1,HPN-ICF-NAT-MIB::hpnicfNATStaticInsideIp,IpAddress,not-accessible,,current,,Inside ip address.
.1.3.6.1.4.1.11.2.14.11.15.2.18.2.10.1.2,HPN-ICF-NAT-MIB::hpnicfNATStaticGlobalIp,IpAddress,read-create,,current,,Global Ip address.
.1.3.6.1.4.1.11.2.14.11.15.2.18.2.10.1.3,HPN-ICF-NAT-MIB::hpnicfNATStaticRowStatus,INTEGER,read-create,,current,active(1):notInService(2):notReady(3):createAndGo(4):createAndWait(5):destroy(6),Only support 'destroy' and 'createAndGo'. If hpnicfNATStaticInsideIp and hpnicfNATStaticGlobalIp were provided correctly, its value is changed 'active'.
.1.3.6.1.4.1.11.2.14.11.15.2.18.2.11,HPN-ICF-NAT-MIB::hpnicfNATStaticEnableTable,,not-accessible,,current,,Active the static Nat on interface.
.1.3.6.1.4.1.11.2.14.11.15.2.18.2.11.1,HPN-ICF-NAT-MIB::hpnicfNATStaticEnableEntry,,not-accessible,ifIndex,current,,Active the static Nat on interface.
.1.3.6.1.4.1.11.2.14.11.15.2.18.2.11.1.2,HPN-ICF-NAT-MIB::hpnicfNATStaticEnable,INTEGER,read-write,,current,disable(0):enable(1),Enable/disable the static Nat on the interface(hpnicfNatStaticEnableIfIndex). disable (0) enable (1) 
.1.3.6.1.4.1.11.2.14.11.15.2.18.2.12,HPN-ICF-NAT-MIB::hpnicfNATDnsMapTable,,not-accessible,,current,,This table is used to set mapping of DNS.
.1.3.6.1.4.1.11.2.14.11.15.2.18.2.12.1,HPN-ICF-NAT-MIB::hpnicfNATDnsMapEntry,,not-accessible,hpnicfNATDnsMapDomainName,current,,The entry of hpnicfNATDnsMapTable.
.1.3.6.1.4.1.11.2.14.11.15.2.18.2.12.1.1,HPN-ICF-NAT-MIB::hpnicfNATDnsMapDomainName,OCTET,not-accessible,,current,,Domain name.
.1.3.6.1.4.1.11.2.14.11.15.2.18.2.12.1.2,HPN-ICF-NAT-MIB::hpnicfNATDnsMapGlobalIp,IpAddress,read-create,,current,,Global IP address.
.1.3.6.1.4.1.11.2.14.11.15.2.18.2.12.1.3,HPN-ICF-NAT-MIB::hpnicfNATDnsMapGlobalPort,Integer32,read-create,,current,, Global port number.
.1.3.6.1.4.1.11.2.14.11.15.2.18.2.12.1.4,HPN-ICF-NAT-MIB::hpnicfNATDnsMapProtocolType,INTEGER,read-create,,current,any(0):typeTCP(1):typeUDP(2),TCP Transmission Control Protocol. UDP User Datagram Protocol.
.1.3.6.1.4.1.11.2.14.11.15.2.18.2.12.1.5,HPN-ICF-NAT-MIB::hpnicfNATDnsMapLastUseTime,TimeTicks,read-create,,current,,Its value is the time that the device uses from startup to last use 'Dns Map'record. If the value is 0,the device never use this record.
.1.3.6.1.4.1.11.2.14.11.15.2.18.2.12.1.6,HPN-ICF-NAT-MIB::hpnicfNATDnsMapRowStatus,INTEGER,read-create,,current,active(1):notInService(2):notReady(3):createAndGo(4):createAndWait(5):destroy(6),Only support 'destroy' and 'createAndGo'. If hpnicfNATDnsMapDomainName, hpnicfNATDnsMapGlobalIp and hpnicfNATDnsMapGlobalPortor hpnicfNATDnsMapDomainName, hpnicfNATDnsMapGlobalIp, hpnicfNATDnsMapGlobalPort and hpnicfNATDnsMapProtocolType were provided correctly, its value is changed 'active'.
.1.3.6.1.4.1.11.2.14.11.15.2.19,HPN-ICF-OID-MIB::hpnicfPos,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.2.19.1,HPN-ICF-PPP-OVER-SONET-MIB::hpnicfPosMIBObjects,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.2.19.1.1,HPN-ICF-PPP-OVER-SONET-MIB::hpnicfPosParamTable,,not-accessible,,current,,The pos parameter table.
.1.3.6.1.4.1.11.2.14.11.15.2.19.1.1.1,HPN-ICF-PPP-OVER-SONET-MIB::hpnicfPosParamTableEntry,,not-accessible,ifIndex,current,,The entry of pos table.
.1.3.6.1.4.1.11.2.14.11.15.2.19.1.1.1.1,HPN-ICF-PPP-OVER-SONET-MIB::hpnicfPosCRC,INTEGER,read-write,,current,crc32(1):crc16(2),The length of CRC
.1.3.6.1.4.1.11.2.14.11.15.2.19.1.1.1.2,HPN-ICF-PPP-OVER-SONET-MIB::hpnicfPosMTU,Integer32,read-write,,current,,Maximum Transfer Unit (MTU) of POS interface
.1.3.6.1.4.1.11.2.14.11.15.2.19.1.1.1.3,HPN-ICF-PPP-OVER-SONET-MIB::hpnicfPosScramble,INTEGER,read-write,,current,true(1):false(2),Scrambling is used to avoid continuous 0 or 1 in signals. This object is to decide whether to scramble or not
.1.3.6.1.4.1.11.2.14.11.15.2.19.1.1.1.4,HPN-ICF-PPP-OVER-SONET-MIB::hpnicfPosClockSource,INTEGER,read-write,,current,system(1):line(2),The value indicates the source of clock signal. System indicates that clock signals are from device itself and line for clock signals from remote
.1.3.6.1.4.1.11.2.14.11.15.2.19.1.1.1.5,HPN-ICF-PPP-OVER-SONET-MIB::hpnicfPosSdhFlagJ0,OCTET,read-write,,current,,The section trace byte. This node is used when the frame type is sdh.
.1.3.6.1.4.1.11.2.14.11.15.2.19.1.1.1.6,HPN-ICF-PPP-OVER-SONET-MIB::hpnicfPosSdhFlagJ1,OCTET,read-write,,current,,The path trace byte. This node is used when the frame type is sdh.
.1.3.6.1.4.1.11.2.14.11.15.2.19.1.1.1.7,HPN-ICF-PPP-OVER-SONET-MIB::hpnicfPosSonetFlagJ0,Integer32,read-write,,current,,The section trace byte. This node is used when the frame type is sonet.
.1.3.6.1.4.1.11.2.14.11.15.2.19.1.1.1.8,HPN-ICF-PPP-OVER-SONET-MIB::hpnicfPosSonetFlagJ1,OCTET,read-write,,current,,The path trace byte. This node is used when the frame type is sonet.
.1.3.6.1.4.1.11.2.14.11.15.2.19.1.1.1.9,HPN-ICF-PPP-OVER-SONET-MIB::hpnicfPosFlagC2,Integer32,read-write,,current,,The parameter for the channel signal value of C2 byte
.1.3.6.1.4.1.11.2.14.11.15.2.19.1.1.1.10,HPN-ICF-PPP-OVER-SONET-MIB::hpnicfPosFrameType,INTEGER,read-write,,current,sdh(1):sonet(2),The frame type that encapsulates the packet. Default frame type is sdh(Synchronous Digital Hierarchy) It also can be configured using sonet type(Synchronous Optical Network).
.1.3.6.1.4.1.11.2.14.11.15.2.19.1.1.1.11,HPN-ICF-PPP-OVER-SONET-MIB::hpnicfPosBindVlanId,Integer32,read-write,,current,,The vlan that this pos port binds. The vlan can not include any other port, otherwise error will be returned. If the vlan has a virtual interface, the status of virtual interface will be up or down according to the link status or this pos.
.1.3.6.1.4.1.11.2.14.11.15.2.19.1.1.1.12,HPN-ICF-PPP-OVER-SONET-MIB::hpnicfPosEncapsulation,INTEGER,read-write,,current,ppp(1):hdlc(2):fr(3),The type of encapsulation 
.1.3.6.1.4.1.11.2.14.11.15.2.19.1.1.1.13,HPN-ICF-PPP-OVER-SONET-MIB::hpnicfPoskeepaliveTimeout,Integer32,read-write,,current,,The keeplive of ppp, hdlc or fr. It is the query interval of link status. Two members of a link should have same keeplive. The default 0 prohibits detecting status of link.
.1.3.6.1.4.1.11.2.14.11.15.2.19.1.1.1.14,HPN-ICF-PPP-OVER-SONET-MIB::hpnicfPosBERthresholdSF,Integer32,read-write,,current,,The bit-error rate threshold for Signal Fault. SF threshold should be greater than SD threshold.
.1.3.6.1.4.1.11.2.14.11.15.2.19.1.1.1.15,HPN-ICF-PPP-OVER-SONET-MIB::hpnicfPosBERthresholdSD,Integer32,read-write,,current,,The bit-error rate threshold for Signal Degrade. SD threshold should be less than SF threshold.
.1.3.6.1.4.1.11.2.14.11.15.2.19.1.1.1.16,HPN-ICF-PPP-OVER-SONET-MIB::hpnicfPosB1Error,Counter64,read-only,,current,,Counter for SBIPE(Section Bit Interleave Parity Error)
.1.3.6.1.4.1.11.2.14.11.15.2.19.1.1.1.17,HPN-ICF-PPP-OVER-SONET-MIB::hpnicfPosB2Error,Counter64,read-only,,current,,Counter for LBIPE(Line Bit Interleave Parity Error)
.1.3.6.1.4.1.11.2.14.11.15.2.19.1.1.1.18,HPN-ICF-PPP-OVER-SONET-MIB::hpnicfPosB3Error,Counter64,read-only,,current,,Counter for PBIPE(Path Bit Interleave Parity Error)
.1.3.6.1.4.1.11.2.14.11.15.2.19.1.1.1.19,HPN-ICF-PPP-OVER-SONET-MIB::hpnicfPosM1Error,Counter64,read-only,,current,,How many times does LREI(Line Remote Error Indication) occur
.1.3.6.1.4.1.11.2.14.11.15.2.19.1.1.1.20,HPN-ICF-PPP-OVER-SONET-MIB::hpnicfPosG1Error,Counter64,read-only,,current,,How many times does PREI(Path Remote Error Indication) occur
.1.3.6.1.4.1.11.2.14.11.15.2.19.1.1.1.21,HPN-ICF-PPP-OVER-SONET-MIB::hpnicfPosFlagJ0Type,INTEGER,read-write,,current,sdh(1):sonet(2),The frame type that encapsulates the flag J0. Default frame type is sdh(Synchronous Digital Hierarchy). It also can be configured using sonet(Synchronous Optical Network) type.
.1.3.6.1.4.1.11.2.14.11.15.2.19.1.1.1.22,HPN-ICF-PPP-OVER-SONET-MIB::hpnicfPosFlagJ1Type,INTEGER,read-write,,current,sdh(1):sonet(2),The frame type that encapsulates the flag J1. Default frame type is sdh(Synchronous Digital Hierarchy). It also can be configured using sonet(Synchronous Optical Network) type.
.1.3.6.1.4.1.11.2.14.11.15.2.19.1.1.1.23,HPN-ICF-PPP-OVER-SONET-MIB::hpnicfPosB1TCAThreshold,Integer32,read-write,,current,,Threshold for B1 TCA.
.1.3.6.1.4.1.11.2.14.11.15.2.19.1.1.1.24,HPN-ICF-PPP-OVER-SONET-MIB::hpnicfPosB2TCAThreshold,Integer32,read-write,,current,,Threshold for B2 TCA.
.1.3.6.1.4.1.11.2.14.11.15.2.19.1.1.1.25,HPN-ICF-PPP-OVER-SONET-MIB::hpnicfPosB3TCAThreshold,Integer32,read-write,,current,,Threshold for B3 TCA.
.1.3.6.1.4.1.11.2.14.11.15.2.19.1.1.1.26,HPN-ICF-PPP-OVER-SONET-MIB::hpnicfPosB1TCAEnable,INTEGER,read-write,,current,enable(1):disable(2),Enable traps of B1 TCA.
.1.3.6.1.4.1.11.2.14.11.15.2.19.1.1.1.27,HPN-ICF-PPP-OVER-SONET-MIB::hpnicfPosB2TCAEnable,INTEGER,read-write,,current,enable(1):disable(2),Enable traps of B2 TCA.
.1.3.6.1.4.1.11.2.14.11.15.2.19.1.1.1.28,HPN-ICF-PPP-OVER-SONET-MIB::hpnicfPosB3TCAEnable,INTEGER,read-write,,current,enable(1):disable(2),Enable traps of B3 TCA.
.1.3.6.1.4.1.11.2.14.11.15.2.19.2,HPN-ICF-PPP-OVER-SONET-MIB::hpnicfPosMIBNotificationsPrefix,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.2.19.2.0,HPN-ICF-PPP-OVER-SONET-MIB::hpnicfPosMIBNotifications,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.2.19.2.0.1,HPN-ICF-PPP-OVER-SONET-MIB::hpnicfPosLOSAlarm,,,,,,Alarm indicates loss of signal
.1.3.6.1.4.1.11.2.14.11.15.2.19.2.0.2,HPN-ICF-PPP-OVER-SONET-MIB::hpnicfPosLOFAlarm,,,,,,Alarm indicates loss of frame
.1.3.6.1.4.1.11.2.14.11.15.2.19.2.0.3,HPN-ICF-PPP-OVER-SONET-MIB::hpnicfPosOOFAlarm,,,,,,Alarm indicates out of frame
.1.3.6.1.4.1.11.2.14.11.15.2.19.2.0.4,HPN-ICF-PPP-OVER-SONET-MIB::hpnicfPosLAISAlarm,,,,,,Alarm when LAIS(Line Alarm Indication Signal) arrives
.1.3.6.1.4.1.11.2.14.11.15.2.19.2.0.5,HPN-ICF-PPP-OVER-SONET-MIB::hpnicfPosLRDIAlarm,,,,,,Alarm when LRDI(Line Remote Defect Indication) arrives
.1.3.6.1.4.1.11.2.14.11.15.2.19.2.0.6,HPN-ICF-PPP-OVER-SONET-MIB::hpnicfPosPRDIAlarm,,,,,,Alarm when PRDI(Path Remote Defect Indication) arrives
.1.3.6.1.4.1.11.2.14.11.15.2.19.2.0.7,HPN-ICF-PPP-OVER-SONET-MIB::hpnicfPosPAISAlarm,,,,,,Alarm when PAIS(Path Alarm Indication Signal) arrives
.1.3.6.1.4.1.11.2.14.11.15.2.19.2.0.8,HPN-ICF-PPP-OVER-SONET-MIB::hpnicfPosLOPAlarm,,,,,,Alarm indicates loss of pointer
.1.3.6.1.4.1.11.2.14.11.15.2.19.2.0.9,HPN-ICF-PPP-OVER-SONET-MIB::hpnicfPosSTIMAlarm,,,,,,Alarm indicates inconsistency between sent and received J0 bytes.
.1.3.6.1.4.1.11.2.14.11.15.2.19.2.0.10,HPN-ICF-PPP-OVER-SONET-MIB::hpnicfPosPTIMAlarm,,,,,,Alarm indicates inconsistency between sent and received J1 bytes.
.1.3.6.1.4.1.11.2.14.11.15.2.19.2.0.11,HPN-ICF-PPP-OVER-SONET-MIB::hpnicfPosPSLMAlarm,,,,,,Alarm indicates a mismatched C2 byte.
.1.3.6.1.4.1.11.2.14.11.15.2.19.2.0.12,HPN-ICF-PPP-OVER-SONET-MIB::hpnicfPosLSDAlarm,,,,,,Alarm indicates that the B2 bit-error rate exceeds SD threshold.
.1.3.6.1.4.1.11.2.14.11.15.2.19.2.0.13,HPN-ICF-PPP-OVER-SONET-MIB::hpnicfPosLSFAlarm,,,,,,Alarm indicates that the B2 bit-error rate exceeds SF threshold.
.1.3.6.1.4.1.11.2.14.11.15.2.19.2.0.14,HPN-ICF-PPP-OVER-SONET-MIB::hpnicfPosNormalAlarm,,,,,,Alarm indicates that the Pos interface state returns normal.
.1.3.6.1.4.1.11.2.14.11.15.2.19.2.0.15,HPN-ICF-PPP-OVER-SONET-MIB::hpnicfPosB1TCAlarm,,,,,,Threshold crossing alarms for B1.
.1.3.6.1.4.1.11.2.14.11.15.2.19.2.0.16,HPN-ICF-PPP-OVER-SONET-MIB::hpnicfPosB2TCAlarm,,,,,,Threshold crossing alarms for B2.
.1.3.6.1.4.1.11.2.14.11.15.2.19.2.0.17,HPN-ICF-PPP-OVER-SONET-MIB::hpnicfPosB3TCAlarm,,,,,,Threshold crossing alarms for B3.
.1.3.6.1.4.1.11.2.14.11.15.2.20,HPN-ICF-OID-MIB::hpnicfNS,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.2.20.1,HPN-ICF-NS-MIB::hpnicfNSMibObjects,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.2.20.1.1,HPN-ICF-NS-MIB::hpnicfNSMibScalarObjects,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.2.20.1.1.1,HPN-ICF-NS-MIB::hpnicfNSActiveTime,Integer32,read-write,,current,,The stream will be aged when the active time of this stream exceeds this value. This object is in minute.
.1.3.6.1.4.1.11.2.14.11.15.2.20.1.1.2,HPN-ICF-NS-MIB::hpnicfNSInactiveTime,Integer32,read-write,,current,,The stream will be aged when the inactive time of this stream exceeds this value. This object is in second.
.1.3.6.1.4.1.11.2.14.11.15.2.20.1.1.3,HPN-ICF-NS-MIB::hpnicfNSVersion,Integer32,read-write,,current,,The version of the exported packet, which describes the format of the exported packet. It should export version 5 and version 8 when this object is 5, but it should export version 9 only when the value of this object is 9. 
.1.3.6.1.4.1.11.2.14.11.15.2.20.1.1.4,HPN-ICF-NS-MIB::hpnicfNSAsType,INTEGER,read-write,,current,peerAs(1):originAs(2),The number of autonomous system (AS). This object can be origin or peer.
.1.3.6.1.4.1.11.2.14.11.15.2.20.1.1.5,HPN-ICF-NS-MIB::hpnicfNSTemplateRefreshRate,Integer32,read-write,,current,,This object specifies the refresh rate in number of exported packets.
.1.3.6.1.4.1.11.2.14.11.15.2.20.1.1.6,HPN-ICF-NS-MIB::hpnicfNSTemplateTimeout,Integer32,read-write,,current,,This object specifies the timeout rate in minutes.
.1.3.6.1.4.1.11.2.14.11.15.2.20.1.1.7,HPN-ICF-NS-MIB::hpnicfNSExportVlanOrIfIndex,INTEGER,read-only,,current,vlanId(1):interfaceIndex(2),This object describes the interface index at the exported packet. It can be interface index or vlan id according to the product.
.1.3.6.1.4.1.11.2.14.11.15.2.20.1.2,HPN-ICF-NS-MIB::hpnicfNSProcessSlotTable,,not-accessible,,current,,This table describes the board which can enable network traffic statistics at the switch or router.
.1.3.6.1.4.1.11.2.14.11.15.2.20.1.2.1,HPN-ICF-NS-MIB::hpnicfNSProcessSlotEntry,,not-accessible,hpnicfNSProcessSlot,current,,The entry of hpnicfNSProcessSlotEntry.
.1.3.6.1.4.1.11.2.14.11.15.2.20.1.2.1.1,HPN-ICF-NS-MIB::hpnicfNSProcessSlot,Integer32,read-only,,current,,This object describes all boards which can processes network traffic statistics at the switch or router.
.1.3.6.1.4.1.11.2.14.11.15.2.20.1.3,HPN-ICF-NS-MIB::hpnicfNSExportConfigTable,,not-accessible,,current,,This table describes the configuration of the exported packets.
.1.3.6.1.4.1.11.2.14.11.15.2.20.1.3.1,HPN-ICF-NS-MIB::hpnicfNSExportConfigEntry,,not-accessible,hpnicfNSAggregationType,current,,The entry of hpnicfNSExportConfigTable.
.1.3.6.1.4.1.11.2.14.11.15.2.20.1.3.1.1,HPN-ICF-NS-MIB::hpnicfNSAggregationType,INTEGER,not-accessible,,current,v5Statistics(1):as(2):destinationPrefix(3):sourcePrefix(4):protocolPort(5):prefix(6):tosAs(7):tosDestinationPrefix(8):tosSourcePrefix(9):tosProtocolPort(10):tosPrefix(11):prefixPort(12),The aggregation type. v5Statistics type counts IP packets which have same source IP address, destination IP address, source port, destination port, protocol, ToS, input interface, output interface. AS type counts IP packets which have same source AS, destination AS, input interface and output interface. destinationPrefix type counts IP packets which have same destination AS, output interface, destination mask and destination prefix. sourcePrefix type counts IP packets which have same source AS, input interface, source mask and source prefix. protocolPort type counts IP packets which have same protocol, source port and destination port. prefix type counts IP packets which have same source AS, destination AS, input interface, output interface, source mask, source prefix, destination mask, destination prefix. tosAS type counts IP packets which have same tos, source AS, destination AS, input interface and output interface. tosDestinationPrefix type counts IP packets which have same tos, destination AS, output interface, destination mask and destination prefix. tosProtocolPort type counts IP packets which have same tos, protocol, source port and destination port. tosSourcePrefix type counts IP packets which have same tos, source AS, input interface, source mask and source prefix. tosPrefix type counts IP packets which have same tos, source AS, destination AS, input interface, output interface, source mask, source prefix, destination mask, destination prefix. prefixPort type counts IP packets which have same tos, input interface, output interface, source mask, source prefix, destination mask, destination prefix, source port and destination port.
.1.3.6.1.4.1.11.2.14.11.15.2.20.1.3.1.2,HPN-ICF-NS-MIB::hpnicfNSHostIPAddr,IpAddress,read-write,,current,,The destination IP address of the exported packet. This destination IP address is a NSC (NS Collector) address.
.1.3.6.1.4.1.11.2.14.11.15.2.20.1.3.1.3,HPN-ICF-NS-MIB::hpnicfNSHostPort,Integer32,read-write,,current,,The destination port of the exported packets. This destination port is a NSC listening port.
.1.3.6.1.4.1.11.2.14.11.15.2.20.1.3.1.4,HPN-ICF-NS-MIB::hpnicfNSSrcIpAddr,IpAddress,read-write,,current,,The source IP address of the exported packets.
.1.3.6.1.4.1.11.2.14.11.15.2.20.1.3.1.5,HPN-ICF-NS-MIB::hpnicfNSState,INTEGER,read-write,,current,enabled(1):disabled(2),The state of aggregation is enabled or disabled.
.1.3.6.1.4.1.11.2.14.11.15.2.20.1.4,HPN-ICF-NS-MIB::hpnicfNSExportInformationTable,,not-accessible,,current,,This table describes the Information of the exported packets.
.1.3.6.1.4.1.11.2.14.11.15.2.20.1.4.1,HPN-ICF-NS-MIB::hpnicfNSExportInformationEntry,,not-accessible,hpnicfNSExportType:hpnicfNSExportSlot,current,,The entry of hpnicfNSExportInformationTable.
.1.3.6.1.4.1.11.2.14.11.15.2.20.1.4.1.1,HPN-ICF-NS-MIB::hpnicfNSExportType,INTEGER,not-accessible,,current,,This object is equal to hpnicfNSAggregationType.
.1.3.6.1.4.1.11.2.14.11.15.2.20.1.4.1.2,HPN-ICF-NS-MIB::hpnicfNSExportSlot,Integer32,not-accessible,,current,,This object is equal to hpnicfNSProcessSlot.
.1.3.6.1.4.1.11.2.14.11.15.2.20.1.4.1.3,HPN-ICF-NS-MIB::hpnicfNSExportStream,Counter32,read-only,,current,,This object counts the exported streams.
.1.3.6.1.4.1.11.2.14.11.15.2.20.1.4.1.4,HPN-ICF-NS-MIB::hpnicfNSExportNum,Counter32,read-only,,current,,This object counts the exported packets.
.1.3.6.1.4.1.11.2.14.11.15.2.20.1.4.1.5,HPN-ICF-NS-MIB::hpnicfNSExportFail,Counter32,read-only,,current,,This object counts the exported packets which failed to send. The error may be unreachable destination IP address.
.1.3.6.1.4.1.11.2.14.11.15.2.20.1.5,HPN-ICF-NS-MIB::hpnicfNSConfigTable,,not-accessible,,current,,This table describes current configurations.
.1.3.6.1.4.1.11.2.14.11.15.2.20.1.5.1,HPN-ICF-NS-MIB::hpnicfNSConfigEntry,,not-accessible,hpnicfNSSourceSlot:hpnicfNSSourceIfIndex:hpnicfNSDestSlot,current,,The entry of hpnicfNSAggregationTable.
.1.3.6.1.4.1.11.2.14.11.15.2.20.1.5.1.1,HPN-ICF-NS-MIB::hpnicfNSSourceSlot,Integer32,not-accessible,,current,,The IP packet will be counted when it is passing through this slot.
.1.3.6.1.4.1.11.2.14.11.15.2.20.1.5.1.2,HPN-ICF-NS-MIB::hpnicfNSSourceIfIndex,Integer32,not-accessible,,current,,The IP packet will be statistics when it through this interface. This object is equal to ifIndex at ifTable.
.1.3.6.1.4.1.11.2.14.11.15.2.20.1.5.1.3,HPN-ICF-NS-MIB::hpnicfNSDestSlot,Integer32,not-accessible,,current,,This object is equal to hpnicfNSProcessSlot.
.1.3.6.1.4.1.11.2.14.11.15.2.20.1.5.1.4,HPN-ICF-NS-MIB::hpnicfNSDirect,INTEGER,read-create,,current,inbound(1):outbound(2),This object describes which packets will be counted. It may be inbound or outbound packets through this interface.
.1.3.6.1.4.1.11.2.14.11.15.2.20.1.5.1.5,HPN-ICF-NS-MIB::hpnicfNSACLNumber,Integer32,read-create,,current,,The number of number-acl group.
.1.3.6.1.4.1.11.2.14.11.15.2.20.1.5.1.6,HPN-ICF-NS-MIB::hpnicfNSACLName,OCTET,read-create,,current,,The name of name-acl group.
.1.3.6.1.4.1.11.2.14.11.15.2.20.1.5.1.7,HPN-ICF-NS-MIB::hpnicfNSACLRule,Integer32,read-create,,current,,The rule of acl group.
.1.3.6.1.4.1.11.2.14.11.15.2.20.1.5.1.8,HPN-ICF-NS-MIB::hpnicfNSConfigRowStatus,INTEGER,read-create,,current,active(1):notInService(2):notReady(3):createAndGo(4):createAndWait(5):destroy(6),SNMP Row Status Variable. Writable objects in the table may be written in any RowStatus state.
.1.3.6.1.4.1.11.2.14.11.15.2.20.1.6,HPN-ICF-NS-MIB::hpnicfNSStatusTable,,not-accessible,,current,,This table describes current information of network traffic.
.1.3.6.1.4.1.11.2.14.11.15.2.20.1.6.1,HPN-ICF-NS-MIB::hpnicfNSStatusEntry,,not-accessible,hpnicfNSSlot,current,,The entry of hpnicfNSAggregationTable.
.1.3.6.1.4.1.11.2.14.11.15.2.20.1.6.1.1,HPN-ICF-NS-MIB::hpnicfNSSlot,Integer32,not-accessible,,current,,This object is equal to hpnicfNSProcessSlot.
.1.3.6.1.4.1.11.2.14.11.15.2.20.1.6.1.2,HPN-ICF-NS-MIB::hpnicfNSActiveStreamNumber,Counter32,read-only,,current,,This object counts current active streams.
.1.3.6.1.4.1.11.2.14.11.15.2.20.1.6.1.3,HPN-ICF-NS-MIB::hpnicfNSTotalStreamNumber,Counter32,read-only,,current,,This object counts all statistic streams.
.1.3.6.1.4.1.11.2.14.11.15.2.20.1.6.1.4,HPN-ICF-NS-MIB::hpnicfNSTotalPacketNumber,Counter32,read-only,,current,,This object counts all statistic packets.
.1.3.6.1.4.1.11.2.14.11.15.2.20.1.6.1.5,HPN-ICF-NS-MIB::hpnicfNSTotalOctetNumber,Counter32,read-only,,current,,This object counts all statistic octets.
.1.3.6.1.4.1.11.2.14.11.15.2.20.1.6.1.6,HPN-ICF-NS-MIB::hpnicfNSMPLSActiveStreamNumber,Counter32,read-only,,current,,This object counts current active MPLS streams.
.1.3.6.1.4.1.11.2.14.11.15.2.20.1.6.1.7,HPN-ICF-NS-MIB::hpnicfNSMPLSTotalStreamNumber,Counter32,read-only,,current,,This object counts all statistic MPLS streams.
.1.3.6.1.4.1.11.2.14.11.15.2.20.1.6.1.8,HPN-ICF-NS-MIB::hpnicfNSMPLSTotalPacketNumber,Counter32,read-only,,current,,This object counts all statistic MPLS packets.
.1.3.6.1.4.1.11.2.14.11.15.2.20.1.6.1.9,HPN-ICF-NS-MIB::hpnicfNSMPLSTotalOctetNumber,Counter32,read-only,,current,,This object counts all statistic octets of MPLS packets.
.1.3.6.1.4.1.11.2.14.11.15.2.20.1.6.1.10,HPN-ICF-NS-MIB::hpnicfNSResetFlag,INTEGER,read-create,,current,enabled(1):disabled(2),Reset all streams. The default value is disabled, and set this value to enabled when resetting.
.1.3.6.1.4.1.11.2.14.11.15.2.20.1.6.1.11,HPN-ICF-NS-MIB::hpnicfNSResetTime,TimeTicks,read-only,,current,,The system up time when stream is reset.
.1.3.6.1.4.1.11.2.14.11.15.2.21,HPN-ICF-OID-MIB::hpnicfAAL5,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.2.21.1,HPN-ICF-AAL5-MIB::hpnicfAAL5MIB,,,,,,This MIB file provides AAL5 specific information that are excluded by RFC 1695 
.1.3.6.1.4.1.11.2.14.11.15.2.21.1.0,HPN-ICF-AAL5-MIB::hpnicfAal5MIBTraps,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.2.21.1.0.1,HPN-ICF-AAL5-MIB::hpnicfAal5VccStateChange,,,,,,The status of AAL5 VCC.
.1.3.6.1.4.1.11.2.14.11.15.2.21.1.1,HPN-ICF-AAL5-MIB::hpnicfAal5MIBObjects,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.2.21.1.1.1,HPN-ICF-AAL5-MIB::hpnicfAal5VccTable,,not-accessible,,current,,This table extends AAL5 VCC performance parameters which definded in aal5VccEntry of RFC1695.
.1.3.6.1.4.1.11.2.14.11.15.2.21.1.1.1.1,HPN-ICF-AAL5-MIB::hpnicfAal5VccEntry,,not-accessible,ifIndex:hpnicfAal5VccVpi:hpnicfAal5VccVci,current,,This list contains the additional AAL5 VCC performance parameters which are not definded in aal5VccEntry of RFC1695.
.1.3.6.1.4.1.11.2.14.11.15.2.21.1.1.1.1.1,HPN-ICF-AAL5-MIB::hpnicfAal5VccVpi,Integer32,not-accessible,,current,,The VPI value of the AAL5 VCC.
.1.3.6.1.4.1.11.2.14.11.15.2.21.1.1.1.1.2,HPN-ICF-AAL5-MIB::hpnicfAal5VccVci,Integer32,not-accessible,,current,,The VCI value of the AAL5 VCC.
.1.3.6.1.4.1.11.2.14.11.15.2.21.1.1.1.1.3,HPN-ICF-AAL5-MIB::hpnicfAal5VccInPkts,Counter32,read-only,,current,,The number of AAL5 CPCS PDUs received.
.1.3.6.1.4.1.11.2.14.11.15.2.21.1.1.1.1.4,HPN-ICF-AAL5-MIB::hpnicfAal5VccOutPkts,Counter32,read-only,,current,,The number of AAL5 CPCS PDUs transmitted.
.1.3.6.1.4.1.11.2.14.11.15.2.21.1.1.1.1.5,HPN-ICF-AAL5-MIB::hpnicfAal5VccInOctets,Counter32,read-only,,current,,The number of AAL5 CPCS PDU octets received.
.1.3.6.1.4.1.11.2.14.11.15.2.21.1.1.1.1.6,HPN-ICF-AAL5-MIB::hpnicfAal5VccOutOctets,Counter32,read-only,,current,,The number of AAL5 CPCS PDU octets transmitted.
.1.3.6.1.4.1.11.2.14.11.15.2.21.1.1.1.1.7,HPN-ICF-AAL5-MIB::hpnicfAal5VccState,INTEGER,read-only,,current,invalid(1):active(2):inactive(3),Indicates whether the particular virtual circuit is operational. 'Active' indicates the particular virtual circuit is operational. 'Inactive' indicates the circuit is temporarily disabled. 'Invalid' indicates the circuit is deleted
.1.3.6.1.4.1.11.2.14.11.15.2.21.1.3,HPN-ICF-AAL5-MIB::hpnicfAal5MIBConformance,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.2.21.1.3.1,HPN-ICF-AAL5-MIB::hpnicfAal5MIBCompliances,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.2.21.1.3.1.1,HPN-ICF-AAL5-MIB::hpnicfAal5MIBCompliance,,,,,,The compliance statement.
.1.3.6.1.4.1.11.2.14.11.15.2.21.1.3.2,HPN-ICF-AAL5-MIB::hpnicfAal5MIBGroups,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.2.21.1.3.2.1,HPN-ICF-AAL5-MIB::hpnicfAal5MIBGroup,,,,,,A collection of objects.
.1.3.6.1.4.1.11.2.14.11.15.2.21.1.3.2.2,HPN-ICF-AAL5-MIB::hpnicfAal5NotificationGroup,,,,,,Traps which may be used to enhance event driven management of the interface.
.1.3.6.1.4.1.11.2.14.11.15.2.22,HPN-ICF-OID-MIB::hpnicfSSH,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.2.22.1,HPN-ICF-SSH-MIB::hpnicfSSHServerMIB,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.2.22.1.1,HPN-ICF-SSH-MIB::hpnicfSSHServerMIBObjects,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.2.22.1.1.1,HPN-ICF-SSH-MIB::hpnicfSSHServerGlobalConfig,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.2.22.1.1.1.1,HPN-ICF-SSH-MIB::hpnicfSSHServerVersion,OCTET,read-only,,current,,The protocol version of the SSH server.
.1.3.6.1.4.1.11.2.14.11.15.2.22.1.1.1.2,HPN-ICF-SSH-MIB::hpnicfSSHServerCompatibleSSH1x,INTEGER,read-write,,current,enableCompatibleSSH1x(1):disableCompatibleSSH1x(2),Supporting compatibility with SSH versions 1.x. It is known that there are still devices using the previous versions. During the transition period, it is important to be able to work in a way that is compatible with the installed SSH clients and servers that use the older version of the protocol.
.1.3.6.1.4.1.11.2.14.11.15.2.22.1.1.1.3,HPN-ICF-SSH-MIB::hpnicfSSHServerRekeyInterval,Integer32,read-write,,current,,The time interval of regenerating SSH server key. The unit is hour.
.1.3.6.1.4.1.11.2.14.11.15.2.22.1.1.1.4,HPN-ICF-SSH-MIB::hpnicfSSHServerAuthRetries,Integer32,read-write,,current,,The limit times of a specified user can retry.
.1.3.6.1.4.1.11.2.14.11.15.2.22.1.1.1.5,HPN-ICF-SSH-MIB::hpnicfSSHServerAuthTimeout,Integer32,read-write,,current,,The SSH server has a timeout for authentication and disconnect if the authentication has not been accepted within the timeout period. The unit is second.
.1.3.6.1.4.1.11.2.14.11.15.2.22.1.1.1.6,HPN-ICF-SSH-MIB::hpnicfSFTPServerIdleTimeout,Integer32,read-write,,current,,The SFTP server has a timeout for idle connection if a user has no activities within the timeout period. The unit is minute.
.1.3.6.1.4.1.11.2.14.11.15.2.22.1.1.1.7,HPN-ICF-SSH-MIB::hpnicfSSHServerEnable,INTEGER,read-write,,current,enableSSHServer(1):disableSSHServer(2),Enable SSH server function.
.1.3.6.1.4.1.11.2.14.11.15.2.22.1.1.1.8,HPN-ICF-SSH-MIB::hpnicfSFTPServerEnable,INTEGER,read-write,,current,enableSFTPService(1):disableSFTPService(2),Enable SFTP server function.
.1.3.6.1.4.1.11.2.14.11.15.2.22.1.1.1.9,HPN-ICF-SSH-MIB::hpnicfSTelnetServerEnable,INTEGER,read-write,,current,enableSTelnetServer(1):disableSTelnetServer(2),Enable STelnet server function.
.1.3.6.1.4.1.11.2.14.11.15.2.22.1.1.1.10,HPN-ICF-SSH-MIB::hpnicfSCPServerEnable,INTEGER,read-write,,current,enableSCPService(1):disableSCPService(2),Enable SCP server function.
.1.3.6.1.4.1.11.2.14.11.15.2.22.1.1.2,HPN-ICF-SSH-MIB::hpnicfSSHUserConfig,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.2.22.1.1.2.1,HPN-ICF-SSH-MIB::hpnicfSSHUserConfigTable,,not-accessible,,current,,A table for managing SSH users.
.1.3.6.1.4.1.11.2.14.11.15.2.22.1.1.2.1.1,HPN-ICF-SSH-MIB::hpnicfSSHUserConfigEntry,,not-accessible,hpnicfSSHUserName,current,,SSH users configuration entry.
.1.3.6.1.4.1.11.2.14.11.15.2.22.1.1.2.1.1.1,HPN-ICF-SSH-MIB::hpnicfSSHUserName,OCTET,not-accessible,,current,,The name of SSH user.
.1.3.6.1.4.1.11.2.14.11.15.2.22.1.1.2.1.1.2,HPN-ICF-SSH-MIB::hpnicfSSHUserServiceType,INTEGER,read-create,,current,invalid(1):all(2):stelnet(3):sftp(4):scp(5),The service type of SSH user uses.
.1.3.6.1.4.1.11.2.14.11.15.2.22.1.1.2.1.1.3,HPN-ICF-SSH-MIB::hpnicfSSHUserAuthType,INTEGER,read-create,,current,invalid(1):password(2):publicKey(3):any(4):publicKeyPassword(5),The authentication type of SSH user chooses.
.1.3.6.1.4.1.11.2.14.11.15.2.22.1.1.2.1.1.4,HPN-ICF-SSH-MIB::hpnicfSSHUserPublicKeyName,OCTET,read-create,,current,,The public key which is used for authentication.
.1.3.6.1.4.1.11.2.14.11.15.2.22.1.1.2.1.1.5,HPN-ICF-SSH-MIB::hpnicfSSHUserWorkDirectory,OCTET,read-create,,current,,The SFTP user's work directory associates with an existing user.
.1.3.6.1.4.1.11.2.14.11.15.2.22.1.1.2.1.1.6,HPN-ICF-SSH-MIB::hpnicfSSHUserRowStatus,INTEGER,read-create,,current,active(1):notInService(2):notReady(3):createAndGo(4):createAndWait(5):destroy(6),The row status variable, used in accordance to installation and removal conventions for conceptual rows. When the `hpnicfSSHUserRowStatus' is set to active(1), no objects in this table can be modified. When 'hpnicfSSHUserRowStatus' is set to notInService(2), every object except the 'hpnicfSSHUserName' object in this table can be modified. To create a row in this table, a manager must set this object to createAndGo(4). Until instances of all corresponding columns are appropriately configured, the value of the corresponding instance of the hpnicfSSHUserRowStatus column is 'notReady'.
.1.3.6.1.4.1.11.2.14.11.15.2.22.1.1.3,HPN-ICF-SSH-MIB::hpnicfSSHSessionInfoTable,,not-accessible,,current,,A table for SSH sessions.
.1.3.6.1.4.1.11.2.14.11.15.2.22.1.1.3.1,HPN-ICF-SSH-MIB::hpnicfSSHSessionInfoEntry,,not-accessible,hpnicfSSHSessionID,current,,The SSH session information entry.
.1.3.6.1.4.1.11.2.14.11.15.2.22.1.1.3.1.1,HPN-ICF-SSH-MIB::hpnicfSSHSessionID,Integer32,not-accessible,,current,,The identifier of SSH session.
.1.3.6.1.4.1.11.2.14.11.15.2.22.1.1.3.1.2,HPN-ICF-SSH-MIB::hpnicfSSHSessionUserName,OCTET,read-only,,current,,The user name of SSH session.
.1.3.6.1.4.1.11.2.14.11.15.2.22.1.1.3.1.3,HPN-ICF-SSH-MIB::hpnicfSSHSessionUserIpAddrType,INTEGER,read-only,,current,unknown(0):ipv4(1):ipv6(2):ipv4z(3):ipv6z(4):dns(16),The user IP address type of SSH session.
.1.3.6.1.4.1.11.2.14.11.15.2.22.1.1.3.1.4,HPN-ICF-SSH-MIB::hpnicfSSHSessionUserIpAddr,OCTET,read-only,,current,,The user IP address of SSH session.
.1.3.6.1.4.1.11.2.14.11.15.2.22.1.1.3.1.5,HPN-ICF-SSH-MIB::hpnicfSSHSessionClientVersion,OCTET,read-only,,current,,The client version of SSH session. It is known that there are still devices using the previous versions.
.1.3.6.1.4.1.11.2.14.11.15.2.22.1.1.3.1.6,HPN-ICF-SSH-MIB::hpnicfSSHSessionServiceType,INTEGER,read-only,,current,invalid(1):stelnet(2):sftp(3):scp(4),The service type of SSH session.
.1.3.6.1.4.1.11.2.14.11.15.2.22.1.1.3.1.7,HPN-ICF-SSH-MIB::hpnicfSSHSessionEncry,INTEGER,read-only,,current,invalid(1):aes128CBC(2):desCBC(3):des3CBC(4),The encryption algorithm of SSH session. There are several encryption algorithms used in SSH protocol, please refer to RFC4253 Section 6.3.
.1.3.6.1.4.1.11.2.14.11.15.2.22.1.1.3.1.8,HPN-ICF-SSH-MIB::hpnicfSSHSessionState,INTEGER,read-only,,current,init(1):verExchange(2):keysExchange(3):authRequest(4):serviceRequest(5):established(6):disconnect(7),The status of SSH session. init : This session is in initial status. verExchange : This session is in version exchanging. keysExchange : This session is in keys exchanging. authRequest : This session is in authentication requesting. serviceRequest : This session is in service requesting. established : This session has been established. disconnected : This session has been disconnected.
.1.3.6.1.4.1.11.2.14.11.15.2.22.1.2,HPN-ICF-SSH-MIB::hpnicfSSHServerObjForTrap,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.2.22.1.2.1,HPN-ICF-SSH-MIB::hpnicfSSHAttemptUserName,OCTET,accessible-for-notify,,current,,The user name of the attacker who attempted to log in.
.1.3.6.1.4.1.11.2.14.11.15.2.22.1.2.2,HPN-ICF-SSH-MIB::hpnicfSSHAttemptIpAddrType,INTEGER,accessible-for-notify,,current,unknown(0):ipv4(1):ipv6(2):ipv4z(3):ipv6z(4):dns(16),The IP address type of the attacker who attempted to log in.
.1.3.6.1.4.1.11.2.14.11.15.2.22.1.2.3,HPN-ICF-SSH-MIB::hpnicfSSHAttemptIpAddr,OCTET,accessible-for-notify,,current,,The IP address of the attacker who attempted to log in.
.1.3.6.1.4.1.11.2.14.11.15.2.22.1.2.4,HPN-ICF-SSH-MIB::hpnicfSSHUserAuthFailureReason,INTEGER,accessible-for-notify,,current,exceedRetries(1):authTimeout(2):otherReason(3),The reason for that a user failed to log in.
.1.3.6.1.4.1.11.2.14.11.15.2.22.1.3,HPN-ICF-SSH-MIB::hpnicfSSHServerNotifications,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.2.22.1.3.0,HPN-ICF-SSH-MIB::hpnicfSSHServerNotificationsPrefix,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.2.22.1.3.0.1,HPN-ICF-SSH-MIB::hpnicfSSHUserAuthFailure,,,,,,The trap is generated when a user fails to authentication.
.1.3.6.1.4.1.11.2.14.11.15.2.22.1.3.0.2,HPN-ICF-SSH-MIB::hpnicfSSHVersionNegotiationFailure,,,,,,The trap is generated when a user fails to negotiate SSH protocol version.
.1.3.6.1.4.1.11.2.14.11.15.2.22.1.3.0.3,HPN-ICF-SSH-MIB::hpnicfSSHUserLogin,,,,,,The trap is generated when a user logs in successfully.
.1.3.6.1.4.1.11.2.14.11.15.2.22.1.3.0.4,HPN-ICF-SSH-MIB::hpnicfSSHUserLogoff,,,,,,The trap is generated when a user logs off.
.1.3.6.1.4.1.11.2.14.11.15.2.23,HPN-ICF-OID-MIB::hpnicfRSA,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.2.23.1,HPN-ICF-RSA-MIB::hpnicfRSAMIBObjects,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.2.23.1.1,HPN-ICF-RSA-MIB::hpnicfRSAPeerPublicKeyTable,,not-accessible,,current,,The (conceptual) RSA Peer Public Key Table
.1.3.6.1.4.1.11.2.14.11.15.2.23.1.1.1,HPN-ICF-RSA-MIB::hpnicfRSAPeerPublicKeyEntry,,not-accessible,hpnicfRSAPeerPublicKeyName,current,,An entry (conceptual row) in the RSA Peer Public Key Table.
.1.3.6.1.4.1.11.2.14.11.15.2.23.1.1.1.1,HPN-ICF-RSA-MIB::hpnicfRSAPeerPublicKeyName,OCTET,not-accessible,,current,,The RSA peer public key name.
.1.3.6.1.4.1.11.2.14.11.15.2.23.1.1.1.2,HPN-ICF-RSA-MIB::hpnicfRSAPeerIpAddress,IpAddress,read-write,,current,,Indicates the IP Address of RSA Peer machine.
.1.3.6.1.4.1.11.2.14.11.15.2.23.1.1.1.3,HPN-ICF-RSA-MIB::hpnicfRSAPeerFQDN,OCTET,read-write,,current,,The Full Qualified Domain Name of RSA Peer Machine
.1.3.6.1.4.1.11.2.14.11.15.2.23.1.1.1.4,HPN-ICF-RSA-MIB::hpnicfRSAPeerPublicKeyCode,OCTET,read-create,,current,,The code of RSA peer public key.
.1.3.6.1.4.1.11.2.14.11.15.2.23.1.1.1.5,HPN-ICF-RSA-MIB::hpnicfRSAPeerPublicKeyStatus,INTEGER,read-create,,current,active(1):notInService(2):notReady(3):createAndGo(4):createAndWait(5):destroy(6),The status of this RSA peer public key entry. Support Active Status and CreateAndGo and Destroy Operation 
.1.3.6.1.4.1.11.2.14.11.15.2.23.1.2,HPN-ICF-RSA-MIB::hpnicfRSALocalKeyPairTable,,not-accessible,,current,,The (conceptual)RSA local Key Pair Table.
.1.3.6.1.4.1.11.2.14.11.15.2.23.1.2.1,HPN-ICF-RSA-MIB::hpnicfRSALocalKeyPairEntry,,not-accessible,hpnicfRSALocalKeyIndex,current,,An entry (conceptual row) in the RSA local Key Pair Table.
.1.3.6.1.4.1.11.2.14.11.15.2.23.1.2.1.1,HPN-ICF-RSA-MIB::hpnicfRSALocalKeyIndex,INTEGER,not-accessible,,current,,The hpnicfRSALocalKeyPairTable Table can only exist one entry at most.
.1.3.6.1.4.1.11.2.14.11.15.2.23.1.2.1.2,HPN-ICF-RSA-MIB::hpnicfRSALocalHostKeyName,OCTET,read-only,,current,,Indicates RSA Host local public key name.Its value is composed of systemname, a underscore and the string of 'Host'
.1.3.6.1.4.1.11.2.14.11.15.2.23.1.2.1.3,HPN-ICF-RSA-MIB::hpnicfRSALocalHostKeyCode,OCTET,read-only,,current,,Indicates the code of RSA Host local pkey that the length is between 512 and 2048 bits.
.1.3.6.1.4.1.11.2.14.11.15.2.23.1.2.1.4,HPN-ICF-RSA-MIB::hpnicfRSALocalHostKeyCreatedTime,OCTET,read-only,,current,,Indicates the created time of RSA local Host key.
.1.3.6.1.4.1.11.2.14.11.15.2.23.1.2.1.5,HPN-ICF-RSA-MIB::hpnicfRSALocalServerKeyName,OCTET,read-only,,current,,Indicates RSA Host local public key name.Its value is composed of systemname, a underscore and the string of 'Server'
.1.3.6.1.4.1.11.2.14.11.15.2.23.1.2.1.6,HPN-ICF-RSA-MIB::hpnicfRSALocalServerKeyCode,OCTET,read-only,,current,,Indicates the code of RSA Host local pkey that the length is between 512 and 2048 bits.
.1.3.6.1.4.1.11.2.14.11.15.2.23.1.2.1.7,HPN-ICF-RSA-MIB::hpnicfRSALocalServerKeyCreatedTime,OCTET,read-only,,current,,Indicates the created time of RSA local Host key.
.1.3.6.1.4.1.11.2.14.11.15.2.23.1.2.1.8,HPN-ICF-RSA-MIB::hpnicfRSALocalKeyPairBits,Integer32,read-create,,current,,The bits of RSA local key pair, ranging between 512 and 2048. By default, the value is 512.
.1.3.6.1.4.1.11.2.14.11.15.2.23.1.2.1.9,HPN-ICF-RSA-MIB::hpnicfRSALocalKeyStatus,INTEGER,read-create,,current,active(1):notInService(2):notReady(3):createAndGo(4):createAndWait(5):destroy(6),The status column used for creating, deleting instances of the columnar objects in the hpnicfRSALocalKeyPairTable table.
.1.3.6.1.4.1.11.2.14.11.15.2.23.1.3,HPN-ICF-RSA-MIB::hpnicfRSAPeerKeyConfigFailReason,INTEGER,accessible-for-notify,,current,rsaSuccess(1):rsaFailure(2):rsaErrNoMemory(3):rsaErrKeyNotReplaced(4):rsaErrKeyBackup(5):rsaErrKeySaved(6):rsaErrKeyGenerate(7):rsaErrKeyDestroy(8):rsaErrHostEncKeyBackup(9):rsaErrHostEncKeySave(10):rsaErrHostEncKeyGenerate(11):rsaErrHostEncKeyDestroy(12):rsaErrHostSigKeyBackup(13):rsaErrHostSigKeySave(14):rsaErrHostSigKeyGenerate(15):rsaErrHostSigKeyDestroy(16):rsaErrServerKeyBackup(17):rsaErrServerKeySave(18):rsaErrServerKeyGenerate(19):rsaErrServerKeyDestroy(20):rsaErrPeerKeyNotReplaced(21):rsaErrPeerKeyNumArriveMax(22):rsaErrPeerKeyNotRemoved(23):rsaErrPeerKeyNotExist(24):rsaStatusKeyExist(25):rsaStatusKeyNotExist(26):rsaStatusKeyInvalid(27):rsaStatusHostEncKeyExist(28):rsaStatusHostEncKeyNotExist(29):rsaStatusHostEncKeyInvalid(30):rsaStatusHostSigKeyExist(31):rsaStatusHostSigKeyNotExist(32):rsaStatusHostSigKeyInvalid(33):rsaStatusServerKeyExist(34):rsaStatusServerKeyNotExist(35):rsaStatusServerKeyInvalid(36),The reason that RSA peer public key fails to config.
.1.3.6.1.4.1.11.2.14.11.15.2.23.1.4,HPN-ICF-RSA-MIB::hpnicfRSALocalKeyFailReason,INTEGER,accessible-for-notify,,current,rsaSuccess(1):rsaFailure(2):rsaErrNoMemory(3):rsaErrKeyNotReplaced(4):rsaErrKeyBackup(5):rsaErrKeySaved(6):rsaErrKeyGenerate(7):rsaErrKeyDestroy(8):rsaErrHostEncKeyBackup(9):rsaErrHostEncKeySave(10):rsaErrHostEncKeyGenerate(11):rsaErrHostEncKeyDestroy(12):rsaErrHostSigKeyBackup(13):rsaErrHostSigKeySave(14):rsaErrHostSigKeyGenerate(15):rsaErrHostSigKeyDestroy(16):rsaErrServerKeyBackup(17):rsaErrServerKeySave(18):rsaErrServerKeyGenerate(19):rsaErrServerKeyDestroy(20):rsaErrPeerKeyNotReplaced(21):rsaErrPeerKeyNumArriveMax(22):rsaErrPeerKeyNotRemoved(23):rsaErrPeerKeyNotExist(24):rsaStatusKeyExist(25):rsaStatusKeyNotExist(26):rsaStatusKeyInvalid(27):rsaStatusHostEncKeyExist(28):rsaStatusHostEncKeyNotExist(29):rsaStatusHostEncKeyInvalid(30):rsaStatusHostSigKeyExist(31):rsaStatusHostSigKeyNotExist(32):rsaStatusHostSigKeyInvalid(33):rsaStatusServerKeyExist(34):rsaStatusServerKeyNotExist(35):rsaStatusServerKeyInvalid(36),The reason that RSA local key pair fails to create, refresh and destroy.
.1.3.6.1.4.1.11.2.14.11.15.2.23.2,HPN-ICF-RSA-MIB::hpnicfRSANotifications,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.2.23.2.1,HPN-ICF-RSA-MIB::hpnicfRSALocalKeyPairOpeFail,,,,,,The trap is generated while the RSA local key pair fails to create, refresh and destory.
.1.3.6.1.4.1.11.2.14.11.15.2.23.2.2,HPN-ICF-RSA-MIB::hpnicfRSAPeerKeyConfigFail,,,,,,The trap is generated while the RSA peer public key fails to configure.
.1.3.6.1.4.1.11.2.14.11.15.2.24,HPN-ICF-OID-MIB::hpnicfVrrpExt,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.2.24.1,HPN-ICF-VRRP-EXT-MIB::hpnicfVrrpExtMibObject,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.2.24.1.1,HPN-ICF-VRRP-EXT-MIB::hpnicfVrrpExtTable,,not-accessible,,current,,Table extends for a VRRP router which consists of a sequence (i.e., one or more conceptual rows) of hpnicfVrrpExtEntry items.
.1.3.6.1.4.1.11.2.14.11.15.2.24.1.1.1,HPN-ICF-VRRP-EXT-MIB::hpnicfVrrpExtEntry,,not-accessible,ifIndex:vrrpOperVrId:hpnicfVrrpExtTrackInterface,current,,An entry in the hpnicfVrrpExtTable containing the status values of a virtual router.
.1.3.6.1.4.1.11.2.14.11.15.2.24.1.1.1.1,HPN-ICF-VRRP-EXT-MIB::hpnicfVrrpExtTrackInterface,INTEGER,not-accessible,,current,,This value is the ifIndex that identifies which interface  the virtual router tracked.
.1.3.6.1.4.1.11.2.14.11.15.2.24.1.1.1.2,HPN-ICF-VRRP-EXT-MIB::hpnicfVrrpExtPriorityReduce,Integer32,read-create,,current,,This value identifies how much priority of a virtual router will be reduced/increased when the interface tracked is down/up.
.1.3.6.1.4.1.11.2.14.11.15.2.24.1.1.1.3,HPN-ICF-VRRP-EXT-MIB::hpnicfVrrpExtRowStatus,INTEGER,read-create,,current,active(1):notInService(2):notReady(3):createAndGo(4):createAndWait(5):destroy(6),The row status variable, used according to installation and removal conventions for conceptual rows. Setting this object to active(1) or createAndGo(4) results in the addition of the ifIndex tracked by a virtual router. Destroying the entry removes the tracked ifIndex from the  virtual router. Other values is not supported now.
.1.3.6.1.4.1.11.2.14.11.15.2.25,HPN-ICF-OID-MIB::hpnicfIpa,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.2.25.1,HPN-ICF-IPA-MIB::hpnicfIpaGlobalStats,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.2.25.1.1,HPN-ICF-IPA-MIB::hpnicfIpaGlobalEnable,INTEGER,read-write,,current,disabled(1):enabled(2), The indication of whether Ip Accounting function is enabled. If it is disabled, ip packets will not be accounted. 
.1.3.6.1.4.1.11.2.14.11.15.2.25.1.2,HPN-ICF-IPA-MIB::hpnicfIpaTimeOutSeconds,Integer32,read-write,,current,, The value of List aging timeout. The unit is second. If exceeding the interval, the item in hpnicfIpaIntListTable, hpnicfIpaExtListTable and hpnicfIpaFWListTable will be removed automaticlly. The range is (3600..604800). 
.1.3.6.1.4.1.11.2.14.11.15.2.25.1.3,HPN-ICF-IPA-MIB::hpnicfIpaIntListMaxItemNum,Integer32,read-write,,current,, The max number of items in hpnicfIpaIntListTable. The range is (0..16384). 
.1.3.6.1.4.1.11.2.14.11.15.2.25.1.4,HPN-ICF-IPA-MIB::hpnicfIpaExtListMaxItemNum,Integer32,read-write,,current,, The max number of items in hpnicfIpaExtListTable. The range is (0..8192). 
.1.3.6.1.4.1.11.2.14.11.15.2.25.1.5,HPN-ICF-IPA-MIB::hpnicfIpaFWListMaxItemNum,Integer32,read-only,,current,, The max number of items in hpnicfIpaFWListTable. 
.1.3.6.1.4.1.11.2.14.11.15.2.25.1.6,HPN-ICF-IPA-MIB::hpnicfIpaAccountListMaxItemNum,Integer32,read-only,,current,, The max number of items in hpnicfIpaAccountListTable. 
.1.3.6.1.4.1.11.2.14.11.15.2.25.1.7,HPN-ICF-IPA-MIB::hpnicfIpaAccountListNextIndex,Integer32,read-only,,current,, The next available index for creating rows of hpnicfIpaAccountListTable. If the value is zero, it means the table is full and no available index can be used. 
.1.3.6.1.4.1.11.2.14.11.15.2.25.1.8,HPN-ICF-IPA-MIB::hpnicfIpaListCleaningFlag,INTEGER,read-write,,current,idle(1):cleaningAll(2):cleaningIntList(3):cleaningExtList(4):cleaningFWList(5), Cleaning List in this module. The default value is idle. If user wants to clean some lists, he can set the value to 2, 3, 4 and 5 to clean the corresponding list. After the operation, the value will return to idle. 
.1.3.6.1.4.1.11.2.14.11.15.2.25.2,HPN-ICF-IPA-MIB::hpnicfIpaIfConfigTable,,not-accessible,,current,, Enable or disable the ip accounting inbound/outbound function under a particular interface. 
.1.3.6.1.4.1.11.2.14.11.15.2.25.2.1,HPN-ICF-IPA-MIB::hpnicfIpaIfConfigEntry,,not-accessible,hpnicfIpaIfConfigIfIndex,current,, Entry of the table. 
.1.3.6.1.4.1.11.2.14.11.15.2.25.2.1.1,HPN-ICF-IPA-MIB::hpnicfIpaIfConfigIfIndex,Integer32,not-accessible,,current,,It equals to ifIndex
.1.3.6.1.4.1.11.2.14.11.15.2.25.2.1.2,HPN-ICF-IPA-MIB::hpnicfIpaIfConfigInEnable,INTEGER,read-write,,current,disabled(1):enabled(2), This object is applicable to hpnicfIpaIntListTable and hpnicfIpaExtListTable. If the value is disabled, inbound ip packets are not accounted. 
.1.3.6.1.4.1.11.2.14.11.15.2.25.2.1.3,HPN-ICF-IPA-MIB::hpnicfIpaIfConfigOutEnable,INTEGER,read-write,,current,disabled(1):enabled(2), This object is applicable to hpnicfIpaIntListTable and hpnicfIpaExtListTable. If the value is disabled, outbound ip packets are not accounted. 
.1.3.6.1.4.1.11.2.14.11.15.2.25.2.1.4,HPN-ICF-IPA-MIB::hpnicfIpaIfConfigFWEnable,INTEGER,read-write,,current,nodirection(1):inbound(2):outbound(3):bidirection(4), This object is applicable to hpnicfIpaFWListTable only. If the value is 'inbound', then inbound ip packets which are denied by firewall are accounted. If the value is 'outbound', then outbound ip packets which were denied by firewall are accounted. If the value is 'nodirection', neither inbound nor outbound ip packets which were denied by firewall are accounted. If the value is 'bidirection', both inbound and outbound ip packets which were denied by firewall are accounted. 
.1.3.6.1.4.1.11.2.14.11.15.2.25.3,HPN-ICF-IPA-MIB::hpnicfIpaAccountListTable,,not-accessible,,current,, The List is used by user to sort packets into two groups by source or destination ip address. When source/destination ip address of a packet matches a item in this table, the packet is accounted in hpnicfIpaIntListTable. When source/destination ip address of a packet does not match any item in this table, the packet is accounted in hpnicfIpaExtListTable. 
.1.3.6.1.4.1.11.2.14.11.15.2.25.3.1,HPN-ICF-IPA-MIB::hpnicfIpaAccountListEntry,,not-accessible,hpnicfIpaAccountListIndex,current,, Entry of the table. 
.1.3.6.1.4.1.11.2.14.11.15.2.25.3.1.1,HPN-ICF-IPA-MIB::hpnicfIpaAccountListIndex,Integer32,not-accessible,,current,, The Index of the table. 
.1.3.6.1.4.1.11.2.14.11.15.2.25.3.1.2,HPN-ICF-IPA-MIB::hpnicfIpaAccountListIpAddr,IpAddress,read-create,,current,, The IP address to which this entry's addressing information pertains. 
.1.3.6.1.4.1.11.2.14.11.15.2.25.3.1.3,HPN-ICF-IPA-MIB::hpnicfIpaAccountListIpMask,IpAddress,read-create,,current,, The subnet mask associated with the IP address of this entry. The value of the mask is an IP address with all the network bits set to 1 and all the hosts bits set to 0. 
.1.3.6.1.4.1.11.2.14.11.15.2.25.3.1.4,HPN-ICF-IPA-MIB::hpnicfIpaAccountListRowStatus,INTEGER,read-create,,current,active(1):notInService(2):notReady(3):createAndGo(4):createAndWait(5):destroy(6), The row status of the entry, Supporting CreateAndGo and Destroy operation. 
.1.3.6.1.4.1.11.2.14.11.15.2.25.4,HPN-ICF-IPA-MIB::hpnicfIpaIntListTable,,not-accessible,,current,, If matching the ip address recorded in hpnicfIpaAccountListTable and not denied by the firewall, the packets will be accounted in this list. 
.1.3.6.1.4.1.11.2.14.11.15.2.25.4.1,HPN-ICF-IPA-MIB::hpnicfIpaIntListEntry,,not-accessible,hpnicfIpaIntListIpSrc:hpnicfIpaIntListIpDst:hpnicfIpaIntListProtocol,current,, Entry of the table. 
.1.3.6.1.4.1.11.2.14.11.15.2.25.4.1.1,HPN-ICF-IPA-MIB::hpnicfIpaIntListIpSrc,IpAddress,not-accessible,,current,, Source IP-address of these accounted packets. 
.1.3.6.1.4.1.11.2.14.11.15.2.25.4.1.2,HPN-ICF-IPA-MIB::hpnicfIpaIntListIpDst,IpAddress,not-accessible,,current,, Destination IP-address of these accounted packets. 
.1.3.6.1.4.1.11.2.14.11.15.2.25.4.1.3,HPN-ICF-IPA-MIB::hpnicfIpaIntListProtocol,Integer32,not-accessible,,current,, The type of these accounted IP packets defined in RFC 1700. 
.1.3.6.1.4.1.11.2.14.11.15.2.25.4.1.4,HPN-ICF-IPA-MIB::hpnicfIpaIntListInPackets,Counter32,read-only,,current,, The number of inbound packets in hpnicfIpaIntListTable. 
.1.3.6.1.4.1.11.2.14.11.15.2.25.4.1.5,HPN-ICF-IPA-MIB::hpnicfIpaIntListInBytes,Counter64,read-only,,current,, The number of inbound bytes in hpnicfIpaIntListTable. 
.1.3.6.1.4.1.11.2.14.11.15.2.25.4.1.6,HPN-ICF-IPA-MIB::hpnicfIpaIntListOutPackets,Counter32,read-only,,current,, The number of outbound Packets in hpnicfIpaIntListTable. 
.1.3.6.1.4.1.11.2.14.11.15.2.25.4.1.7,HPN-ICF-IPA-MIB::hpnicfIpaIntListOutBytes,Counter64,read-only,,current,, The number of outbound bytes in hpnicfIpaIntListTable. 
.1.3.6.1.4.1.11.2.14.11.15.2.25.5,HPN-ICF-IPA-MIB::hpnicfIpaExtListTable,,not-accessible,,current,, If mismatching the ip address recorded in the hpnicfIpaAccountListTable and not denied by the firewall, the packets will be accounted in this list. 
.1.3.6.1.4.1.11.2.14.11.15.2.25.5.1,HPN-ICF-IPA-MIB::hpnicfIpaExtListEntry,,not-accessible,hpnicfIpaExtListIpSrc:hpnicfIpaExtListIpDst:hpnicfIpaExtListProtocol,current,, Entry of the table. 
.1.3.6.1.4.1.11.2.14.11.15.2.25.5.1.1,HPN-ICF-IPA-MIB::hpnicfIpaExtListIpSrc,IpAddress,not-accessible,,current,, Source IP-address of these accounted packets. 
.1.3.6.1.4.1.11.2.14.11.15.2.25.5.1.2,HPN-ICF-IPA-MIB::hpnicfIpaExtListIpDst,IpAddress,not-accessible,,current,, Destination IP-address of these accounted packets. 
.1.3.6.1.4.1.11.2.14.11.15.2.25.5.1.3,HPN-ICF-IPA-MIB::hpnicfIpaExtListProtocol,Integer32,not-accessible,,current,, The value indicates the value of the 'protocol' field which is part of ip packet header. 
.1.3.6.1.4.1.11.2.14.11.15.2.25.5.1.4,HPN-ICF-IPA-MIB::hpnicfIpaExtListInPackets,Counter32,read-only,,current,, The number of inbound packets in hpnicfIpaExtListTable. 
.1.3.6.1.4.1.11.2.14.11.15.2.25.5.1.5,HPN-ICF-IPA-MIB::hpnicfIpaExtListInBytes,Counter64,read-only,,current,, The number of inbound bytes in hpnicfIpaExtListTable. 
.1.3.6.1.4.1.11.2.14.11.15.2.25.5.1.6,HPN-ICF-IPA-MIB::hpnicfIpaExtListOutPackets,Counter32,read-only,,current,, The number of outbound packets in hpnicfIpaExtListTable. 
.1.3.6.1.4.1.11.2.14.11.15.2.25.5.1.7,HPN-ICF-IPA-MIB::hpnicfIpaExtListOutBytes,Counter64,read-only,,current,, The number of outbound bytes in hpnicfIpaExtListTable. 
.1.3.6.1.4.1.11.2.14.11.15.2.25.6,HPN-ICF-IPA-MIB::hpnicfIpaFWListTable,,not-accessible,,current,, If the packet is denied by the firewall, it will be accounted in this list. 
.1.3.6.1.4.1.11.2.14.11.15.2.25.6.1,HPN-ICF-IPA-MIB::hpnicfIpaFWListEntry,,not-accessible,hpnicfIpaFWListIpSrc:hpnicfIpaFWListIpDst,current,, Entry of the table. 
.1.3.6.1.4.1.11.2.14.11.15.2.25.6.1.1,HPN-ICF-IPA-MIB::hpnicfIpaFWListIpSrc,IpAddress,not-accessible,,current,, Source IP-address of these accounted packets. 
.1.3.6.1.4.1.11.2.14.11.15.2.25.6.1.2,HPN-ICF-IPA-MIB::hpnicfIpaFWListIpDst,IpAddress,not-accessible,,current,, Destination IP-address of these accounted packets. 
.1.3.6.1.4.1.11.2.14.11.15.2.25.6.1.3,HPN-ICF-IPA-MIB::hpnicfIpaFWListInPackets,Counter32,read-only,,current,, The number of outbound packets in hpnicfIpaFWListTable. 
.1.3.6.1.4.1.11.2.14.11.15.2.25.6.1.4,HPN-ICF-IPA-MIB::hpnicfIpaFWListInBytes,Counter64,read-only,,current,, The number of inbound bytes in hpnicfIpaFWListTable. 
.1.3.6.1.4.1.11.2.14.11.15.2.25.6.1.5,HPN-ICF-IPA-MIB::hpnicfIpaFWListOutPackets,Counter32,read-only,,current,, The number of outbound packets in hpnicfIpaFWListTable. 
.1.3.6.1.4.1.11.2.14.11.15.2.25.6.1.6,HPN-ICF-IPA-MIB::hpnicfIpaFWListOutBytes,Counter64,read-only,,current,, The number of outbound bytes in hpnicfIpaFWListTable. 
.1.3.6.1.4.1.11.2.14.11.15.2.26,HPN-ICF-OID-MIB::hpnicfPortSecurity,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.2.26.1,HPN-ICF-PORT-SECURITY-MIB::hpnicfPortSecurityMIB,,,,,,The MIB module is used for managing port security.
.1.3.6.1.4.1.11.2.14.11.15.2.26.1.1,HPN-ICF-PORT-SECURITY-MIB::hpnicfPortSecurityLeaf,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.2.26.1.1.1,HPN-ICF-PORT-SECURITY-MIB::hpnicfSecurePortSecurityControl,INTEGER,read-write,,current,enabled(1):disabled(2),This attribute controls the system wide operation of network access control. The configured port security options only become operational when this attribute is set to enabled.
.1.3.6.1.4.1.11.2.14.11.15.2.26.1.1.2,HPN-ICF-PORT-SECURITY-MIB::hpnicfSecurePortVlanMembershipList,OCTET,accessible-for-notify,,current,,This is a dummy MIB object referenced by the hpnicfsecureLogon and hpnicfsecureLogoff traps. This object contains a comma separated list of the VLAN identifiers (0-4095) assigned to a port. A tagged VLAN has a 'T' suffix after the VLAN number and an untagged VLAN may have an optional 'U' suffix.
.1.3.6.1.4.1.11.2.14.11.15.2.26.1.1.4,HPN-ICF-PORT-SECURITY-MIB::hpnicfSecureRalmObjects,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.2.26.1.1.4.1,HPN-ICF-PORT-SECURITY-MIB::hpnicfSecureRalmDefaultSessionTime,INTEGER,read-write,,current,,Specifies the default session lifetime in seconds before a forwarding MAC address is re-authenticated. The default time is 1800 seconds.
.1.3.6.1.4.1.11.2.14.11.15.2.26.1.1.4.2,HPN-ICF-PORT-SECURITY-MIB::hpnicfSecureRalmHoldoffTime,INTEGER,read-write,,current,,Specifies the time in seconds before a blocked (denied) MAC address can be re-authenticated. The default time is 60 seconds.
.1.3.6.1.4.1.11.2.14.11.15.2.26.1.1.4.3,HPN-ICF-PORT-SECURITY-MIB::hpnicfSecureRalmReauthenticate,OCTET,read-write,,current,,Writing a MAC address to this object causes an immediate RALM re-authentication of this address (can be on any port). If the MAC address not currently known to RALM, it silently ignores the write.
.1.3.6.1.4.1.11.2.14.11.15.2.26.1.1.4.4,HPN-ICF-PORT-SECURITY-MIB::hpnicfSecureRalmAuthMode,INTEGER,read-write,,current,papUsernameAsMacAddress(1):papUsernameFixed(2),This controls how MAC addresses are authenticated. papUsernameAsMacAddress(1) Authentication uses the RADIUS server by sending a PAP request with Username and Password both equal to the MAC address being authenticated. This is the default. papUsernameFixed(2) Authentication uses the RADIUS server by sending a PAP request with Username and Password coming from the hpnicfSecureRalmAuthUsername and hpnicfSecureRalmAuthPassword MIB objects. In this mode the RADIUS server would normally take into account the request's calling-station-id attribute, which is the MAC address of the host being authenticated.
.1.3.6.1.4.1.11.2.14.11.15.2.26.1.1.4.5,HPN-ICF-PORT-SECURITY-MIB::hpnicfSecureRalmAuthUsername,OCTET,read-write,,current,,This is the username used for authentication requests where hpnicfSecureRalmAuthMode is papUsernameFixed. Default shall be 'mac'.
.1.3.6.1.4.1.11.2.14.11.15.2.26.1.1.4.6,HPN-ICF-PORT-SECURITY-MIB::hpnicfSecureRalmAuthPassword,OCTET,read-write,,current,,This is the password used for authentication requests where hpnicfSecureRalmAuthMode is papUsernameFixed. Default shall be a null string.
.1.3.6.1.4.1.11.2.14.11.15.2.26.1.1.4.7,HPN-ICF-PORT-SECURITY-MIB::hpnicfSecureRalmAuthDomain,OCTET,read-write,,current,,MAC-authentication users may be configured in a specific domain, which excludes 802.1x and other authentication users. This specifies the domain of all MAC-authentication users.
.1.3.6.1.4.1.11.2.14.11.15.2.26.1.1.4.8,HPN-ICF-PORT-SECURITY-MIB::hpnicfSecureRalmAuthOfflineTime,Integer32,read-write,,current,,Switch isn't informed when online user is offline, so switch should be able to detect offline and inform radius server to stop accounting when there is no traffic of the user. This attribute configures the timer interval of offline-detect. The default time is 300 seconds.
.1.3.6.1.4.1.11.2.14.11.15.2.26.1.1.4.9,HPN-ICF-PORT-SECURITY-MIB::hpnicfSecureRalmAuthServerTimeoutTime,INTEGER,read-write,,current,,When switch sends request packets (include connecting request and offline request, etc) to radius server and there is no response, switch will terminate the authentication process. This attribute configures the timer interval of server-timeout. The default time is 100 seconds.
.1.3.6.1.4.1.11.2.14.11.15.2.26.1.1.4.10,HPN-ICF-PORT-SECURITY-MIB::hpnicfSecureMacControl,INTEGER,read-write,,current,enabled(1):disabled(2),This attribute controls the system wide operation of mac-authentication. The system-wide mac-authentication options become non-operational when this attribute is set to disabled. This is required for hpnicfSecurePortSecurityControl to be enabled.
.1.3.6.1.4.1.11.2.14.11.15.2.26.1.2,HPN-ICF-PORT-SECURITY-MIB::hpnicfPortSecurityTables,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.2.26.1.2.1,HPN-ICF-PORT-SECURITY-MIB::hpnicfSecurePortTable,,not-accessible,,current,,This table defines the security status of each secure port. Each port can have a number of authorised MAC addresses, and these are stored in the hpnicfSecureAddressTable.
.1.3.6.1.4.1.11.2.14.11.15.2.26.1.2.1.1,HPN-ICF-PORT-SECURITY-MIB::hpnicfSecurePortEntry,,not-accessible,ifIndex,current,,There is a row in this table for each secure port, and allows repeater ports to be configured for security on a per port basis. It is indexed using the object ifIndex in RFC1213-MIB.
.1.3.6.1.4.1.11.2.14.11.15.2.26.1.2.1.1.1,HPN-ICF-PORT-SECURITY-MIB::hpnicfSecurePortMode,INTEGER,read-write,,current,noRestrictions(1):continuousLearning(2):autoLearn(3):secure(4):userLogin(5):userLoginSecure(6):userLoginWithOUI(7):macAddressWithRadius(8):macAddressOrUserLoginSecure(9):macAddressElseUserLoginSecure(10):userLoginSecureExt(11):macAddressOrUserLoginSecureExt(12):macAddressElseUserLoginSecureExt(13):macAddressAndUserLoginSecure(14):macAddressAndUserLoginSecureExt(15),Determines the learning and security modes of the port. See hpnicfSecureNeedToKnowMode and hpnicfSecureIntrusionAction to configure Need To Know and Intrusion Action on each port. (When in a learning mode, hpnicfSecureNumberAddresses determines the maximum number of addresses that can be learned on the port. This is set by the user.) noRestrictions(1) All of the security features are disabled. continuousLearning(2) Addresses are learned continually. If more addresses are learned than are permitted on the port, then one of the older entries will be aged out. Need To Know and Intrusion Action depends on hpnicfSecureNeedToKnowMode and hpnicfSecureIntrusionAction respectively. autoLearn(3) All addresses for this port are deleted, and then addresses are learned up to the number permitted. hpnicfSecurePortMode is then set to secure. Need To Know and Intrusion Action depends on hpnicfSecureNeedToKnowMode and hpnicfSecureIntrusionAction respectively. secure(4) Learning is disabled. Need To Know and Intrusion Action depends on hpnicfSecureNeedToKnowMode and hpnicfSecureIntrusionAction respectively. userLogin(5) Access to the port is denied until the port client is authorised (by 802.1X or other authentication mechanism). Once authorised, traffic will be accepted from any MAC address. The Need To Know and Intrusion Action are ignored. userLoginSecure(6) Access to the port is denied until the port client is authorised (by 802.1X or other authentication mechanism). When the client is authorised, the MAC address is added to the Secure Address Table. The hpnicfSecureMaximumAddresses is set to one automatically when this mode is entered. Any existing MAC addresses in the Secure Address Table are deleted. Need To Know and Intrusion Action depends on hpnicfSecureNeedToKnowMode and hpnicfSecureIntrusionAction respectively. Learning is disabled. userLoginWithOUI(7) This mode is similar to the userLoginSecure mode except that a second MAC address may be placed in the Secure Address Table. This second address is authorised based on the MAC address OUI value. If a new device with an authorised OUI value is discovered, the previous entry is deleted. Traffic from the OUI authorised device will be accepted even if the user has not been authenticated. Need To Know and Intrusion Action depends on hpnicfSecureNeedToKnowMode and hpnicfSecureIntrusionAction respectively. macAddressWithRadius(8) This selects the RADIUS Authenticated Login using MAC-address (RALM) security mode on the port. This feature controls network access of a host based on authenticating its MAC address. Once authorised, the host is allowed access to the network. If unauthorised, the port can be configured to deny access to this MAC address or to allow some access depending upon the port VLAN and QoS configuration. Where access is allowed, the MAC address is added to the Secure Address Table. macAddressOrUserLoginSecure(9) This selects both the macAddressWithRadius and userLoginSecure modes together such that either or both are allowed to authorised access. Where both authorised access, userLoginSecure takes precedence. macAddressElseUserLoginSecure(10) This selects both the macAddressWithRadius and userLoginSecure modes together such that the MAC address is first authenticated and only if this fails does the userLoginSecure then attempt user authentication. userLoginSe
.1.3.6.1.4.1.11.2.14.11.15.2.26.1.2.1.1.2,HPN-ICF-PORT-SECURITY-MIB::hpnicfSecureNeedToKnowMode,INTEGER,read-write,,current,notAvailable(1):disabled(2):needToKnowOnly(3):needToKnowWithBroadcastsAllowed(4):needToKnowWithMulticastsAllowed(5):permanentNeedToKnowOnly(6):permanentNeedToKnowWithBroadcastsAllowed(7):permanentNeedToKnowWithMulticastsAllowed(8),Attribute to determine which frames are to be forwarded to this port intact. 1 - Need To Know is not available. 2 - All frames. 3 - Frames addressed to the authorised devices only. 4 - Frames addressed to the authorised devices, plus all broadcast frames. 5 - Frames addressed to the authorised devices, plus all broadcast and multicast frames. 6 - As 3 and cannot be changed. 7 - As 4 and cannot be changed. 8 - As 5 and cannot be changed. If this object returns 1,6,7 or 8, it means that the Need To Know configuration cannot be changed, and any attempt to write to this object will cause an error.
.1.3.6.1.4.1.11.2.14.11.15.2.26.1.2.1.1.3,HPN-ICF-PORT-SECURITY-MIB::hpnicfSecureIntrusionAction,INTEGER,read-write,,current,notAvailable(1):noAction(2):disablePort(3):disablePortTemporarily(4):allowDefaultAccess(5):blockMacAddress(6),Attribute to determine the action if an unauthorised device transmits on this port.
.1.3.6.1.4.1.11.2.14.11.15.2.26.1.2.1.1.4,HPN-ICF-PORT-SECURITY-MIB::hpnicfSecureNumberAddresses,Integer32,read-write,,current,,The maximum number of addresses that the port can learn or store. Reducing this number may cause some addresses to be deleted. This value is set by the user and cannot be automatically changed by the agent. The maximum number will not include and limit the number of static mac addresses that configured by manager. The following relationship must be preserved. hpnicfSecureNumberAddressesStored <= hpnicfSecureNumberAddresses <= hpnicfSecureMaximumAddresses 
.1.3.6.1.4.1.11.2.14.11.15.2.26.1.2.1.1.5,HPN-ICF-PORT-SECURITY-MIB::hpnicfSecureNumberAddressesStored,Integer32,read-only,,current,,The number of addresses that are currently in the AddressTable for this port. If this object has the same value as hpnicfSecureNumberAddresses, then no more addresses can be authorised on this port. The number will not include and limit the number of static mac addresses that configured by manager. Those objects are bound by the relationship: hpnicfSecureNumberAddressesStored <= hpnicfSecureNumberAddresses <= hpnicfSecureMaximumAddresses 
.1.3.6.1.4.1.11.2.14.11.15.2.26.1.2.1.1.6,HPN-ICF-PORT-SECURITY-MIB::hpnicfSecureMaximumAddresses,Integer32,read-only,,current,,This indicates the maximum value that hpnicfSecureNumberAddresses can be set to. It is dependent on the resources available so may change, eg. if resources are shared between ports, then this value can both increase and decrease. This object must be read before setting hpnicfSecureNumberAddresses. Those objects are bound by the relationship: hpnicfSecureNumberAddressesStored <= hpnicfSecureNumberAddresses <= hpnicfSecureMaximumAddresses 
.1.3.6.1.4.1.11.2.14.11.15.2.26.1.2.2,HPN-ICF-PORT-SECURITY-MIB::hpnicfSecureAddressTable,,not-accessible,,current,,This table stores the MAC addresses assigned to each port. This table can be written to by the agent as well as the management station.
.1.3.6.1.4.1.11.2.14.11.15.2.26.1.2.2.1,HPN-ICF-PORT-SECURITY-MIB::hpnicfSecureAddressEntry,,not-accessible,ifIndex:hpnicfSecureAddrMAC:hpnicfSecureAddrVlanID,current,,This table allows multiple addresses to be assigned to each secure port. It is indexed using the objects ifIndex, hpnicfSecureAddrMAC and hpnicfSecureVlanID.
.1.3.6.1.4.1.11.2.14.11.15.2.26.1.2.2.1.1,HPN-ICF-PORT-SECURITY-MIB::hpnicfSecureAddrMAC,OCTET,accessible-for-notify,,current,,The MAC address of a station assigned to this port. This is the second index into the hpnicfSecureAddressTable.
.1.3.6.1.4.1.11.2.14.11.15.2.26.1.2.2.1.2,HPN-ICF-PORT-SECURITY-MIB::hpnicfSecureAddrVlanID,Integer32,read-create,,current,,The Vlan ID associate with the port and the MAC address. This is the third index into the hpnicfSecureAddressTable.
.1.3.6.1.4.1.11.2.14.11.15.2.26.1.2.2.1.3,HPN-ICF-PORT-SECURITY-MIB::hpnicfSecureAddrMACStatus,INTEGER,read-create,,current,addressBlackhole(1):addressUserConfig(2):addressDot1xAuth(3):addressRALM(4),The state of the mac address assigned to this port. addressBlackhole (1) the mac address is a blackhole address, Each packet whose source address is equal to this address will be dropped by the agent. addressUserConfig (2) the mac address configed by user with this state are preserved across power cycles and resets. addressDot1xAuth (3) the mac address is authorized by 802.1x authenticator, User can not configure this mac address. This value is used for GET and GETNEXT operation. addressRALM (4) the mac address is authorized by RALM authenticator, User can not configure this mac address. This value is used for GET and GETNEXT operation. 
.1.3.6.1.4.1.11.2.14.11.15.2.26.1.2.2.1.4,HPN-ICF-PORT-SECURITY-MIB::hpnicfSecureAddrRowStatus,INTEGER,read-create,,current,active(1):notInService(2):notReady(3):createAndGo(4):createAndWait(5):destroy(6),This manages the creation and deletion or rows, and shows the current status of the indexed MAC address. This object has the following values. active(1) The indexed MAC address is authorised on this port. notInService(2) Not Supported. notReady(3) Not Supported. createAndGo(4) Assign a new MAC address to the port and authorise immediately. createAndWait(5) Not Supported. destroy(6) Delete this entry. When creating a new entry, index a new row and use createAndGo(4). When reading this object, only active(1) will be returned. 
.1.3.6.1.4.1.11.2.14.11.15.2.26.1.2.3,HPN-ICF-PORT-SECURITY-MIB::hpnicfSecureOUITable,,not-accessible,,current,,This table stores the OUI values for OUI based authentication.
.1.3.6.1.4.1.11.2.14.11.15.2.26.1.2.3.1,HPN-ICF-PORT-SECURITY-MIB::hpnicfSecureOUIEntry,,not-accessible,hpnicfSecureOUIIndex,current,,This is a row in the hpnicfSecureOUITable.
.1.3.6.1.4.1.11.2.14.11.15.2.26.1.2.3.1.1,HPN-ICF-PORT-SECURITY-MIB::hpnicfSecureOUIIndex,INTEGER,not-accessible,,current,,The index number. This is the first index into the hpnicfSecureOUITable.
.1.3.6.1.4.1.11.2.14.11.15.2.26.1.2.3.1.2,HPN-ICF-PORT-SECURITY-MIB::hpnicfSecureOUI,OCTET,read-create,,current,,The OUI value for an authorised device.
.1.3.6.1.4.1.11.2.14.11.15.2.26.1.2.3.1.3,HPN-ICF-PORT-SECURITY-MIB::hpnicfSecureOUIRowStatus,INTEGER,read-create,,current,active(1):notInService(2):notReady(3):createAndGo(4):createAndWait(5):destroy(6),This manages the creation and deletion of rows, and shows the current status of the entry. active(1) The indexed OUI value is authorised. notInService(2) Not Supported. notReady(3) Not Supported. createAndGo(4) Assign a new OUI to the unit and authorise immediately. createAndWait(5) Not Supported. destroy(6) Delete this entry. When creating a new entry, index a new row and use createAndGo(4) . When reading this object, only active(1) will be returned. 
.1.3.6.1.4.1.11.2.14.11.15.2.26.1.2.4,HPN-ICF-PORT-SECURITY-MIB::hpnicfSecureBindingTable,,not-accessible,,current,,This table stores the elements of binding rules include the MAC addresses, the IP address and the port. Only the frame exactly matching the binding rules can be forwarded. This table can be written to by the agent as well as the management station.
.1.3.6.1.4.1.11.2.14.11.15.2.26.1.2.4.1,HPN-ICF-PORT-SECURITY-MIB::hpnicfSecureBindingEntry,,not-accessible,hpnicfSecureBindingIndex,current,,This table allows multiple binding rules. It is indexed using the object hpnicfSecureBindingIndex.
.1.3.6.1.4.1.11.2.14.11.15.2.26.1.2.4.1.1,HPN-ICF-PORT-SECURITY-MIB::hpnicfSecureBindingIndex,Integer32,not-accessible,,current,,The index number. This is the first index into the hpnicfSecureBindingTable.
.1.3.6.1.4.1.11.2.14.11.15.2.26.1.2.4.1.2,HPN-ICF-PORT-SECURITY-MIB::hpnicfSecureBindingPort,Integer32,read-create,,current,,The port number of the port bound with the IP address and the MAC address.
.1.3.6.1.4.1.11.2.14.11.15.2.26.1.2.4.1.3,HPN-ICF-PORT-SECURITY-MIB::hpnicfSecureBindingAddrMAC,OCTET,read-create,,current,,The MAC address bound with the port and the IP address.
.1.3.6.1.4.1.11.2.14.11.15.2.26.1.2.4.1.4,HPN-ICF-PORT-SECURITY-MIB::hpnicfSecureBindingAddrIp,IpAddress,read-create,,current,,The IP address bound with the port and the MAC address.
.1.3.6.1.4.1.11.2.14.11.15.2.26.1.2.4.1.5,HPN-ICF-PORT-SECURITY-MIB::hpnicfSecureBindingRowStatus,INTEGER,read-create,,current,active(1):notInService(2):notReady(3):createAndGo(4):createAndWait(5):destroy(6),This manages the creation and deletion or rows, and shows status of the entry. This object has the following values. active(1) The indexed MAC address is authorised on this port. notInService(2) Not Supported. notReady(3) Not Supported. createAndGo(4) Assign a new MAC address to the port and authorise immediately. createAndWait(5) Not Supported. destroy(6) Delete this entry. When creating a new entry, index a new row and use createAndGo(4). When reading this object, only active(1) will be returned. 
.1.3.6.1.4.1.11.2.14.11.15.2.26.1.2.5,HPN-ICF-PORT-SECURITY-MIB::hpnicfSecureAssignTable,,not-accessible,,current,,Table of port assignment management information about authorised user.
.1.3.6.1.4.1.11.2.14.11.15.2.26.1.2.5.1,HPN-ICF-PORT-SECURITY-MIB::hpnicfSecureAssignEntry,,not-accessible,ifIndex,current,,An entry (conceptual row) representing information about port assignment about authorised user.
.1.3.6.1.4.1.11.2.14.11.15.2.26.1.2.5.1.1,HPN-ICF-PORT-SECURITY-MIB::hpnicfSecureAssignEnable,INTEGER,read-write,,current,true(1):false(2),The user-based port configuration control. Setting this attribute TRUE causes the port to be configured with any configuration parameters supplied by the authentication server. Setting this attribute to FALSE causes any configuration parameters supplied by the authentication server to be ignored.
.1.3.6.1.4.1.11.2.14.11.15.2.26.1.2.5.1.2,HPN-ICF-PORT-SECURITY-MIB::hpnicfSecureVlanAssignment,OCTET,read-only,,current,,The VLAN membership assigned to the port for the authorised user. This contains the actual value received from the authentication server. This object will contain a null value if there is no user authorised to access the port or if the authorised user was not assigned a VLAN membership.
.1.3.6.1.4.1.11.2.14.11.15.2.26.1.3,HPN-ICF-PORT-SECURITY-MIB::hpnicfPortSecurityNotifications,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.2.26.1.3.1,HPN-ICF-PORT-SECURITY-MIB::hpnicfSecureAddressLearned,,,,,,This trap is sent when a new station has been learned. The port on which the address was received is the first object, and the MAC address of the learned station is in the second object.
.1.3.6.1.4.1.11.2.14.11.15.2.26.1.3.2,HPN-ICF-PORT-SECURITY-MIB::hpnicfSecureViolation,,,,,,This trap is sent whenever a security violation has occurred. The port on which the violation occured is the first object, and the MAC address of the offending station is in the second object. ifAdminStatus indicates if the port has been disabled because of the violation. The implementation may not send violation traps from the same port at intervals of less than 5 seconds.
.1.3.6.1.4.1.11.2.14.11.15.2.26.1.3.3,HPN-ICF-PORT-SECURITY-MIB::hpnicfSecureLoginFailure,,,,,,This trap is sent whenever a user network access authentication has failed. The port on which the violation occured is the first object, and the MAC address of the offending station is in the second object. The dot1xAuthSessionUserName is the identity supplied during the user authentication.
.1.3.6.1.4.1.11.2.14.11.15.2.26.1.3.4,HPN-ICF-PORT-SECURITY-MIB::hpnicfSecureLogon,,,,,,This trap is sent when a new session is started for an authorised port user. The port on which the violation occured is the first object, and the MAC address of the offending station is in the second object. The dot1xAuthSessionUserName is the identity supplied during the user authentication. The dot1xAuthSessionAuthenticMethod indicates how the user was authorised. The hpnicfSecurePortVlanMembershipList object identifies the VLAN membership assigned to the port on session activation.
.1.3.6.1.4.1.11.2.14.11.15.2.26.1.3.5,HPN-ICF-PORT-SECURITY-MIB::hpnicfSecureLogoff,,,,,,This trap is sent when a user session is terminated. The port on which the violation occured is the first object, and the MAC address of the offending station is in the second object. The dot1xAuthSessionUserName is the identity supplied during the user authentication. The dot1xAuthSessionTerminateCause indicates the reason why the session was terminated. The hpnicfSecurePortVlanMembershipList object identifies the VLAN membership assigned to the port on session termination.
.1.3.6.1.4.1.11.2.14.11.15.2.26.1.3.6,HPN-ICF-PORT-SECURITY-MIB::hpnicfSecureRalmLoginFailure,,,,,,This trap is sent whenever a user network access authentication has failed. The port on which the violation occured is the first object, and the MAC address of the offending station is in the second object. The authentication mode indicates how the user was authorised. The hpnicfSecureRalmAuthUsername is the identity supplied during the user authentication.
.1.3.6.1.4.1.11.2.14.11.15.2.26.1.3.7,HPN-ICF-PORT-SECURITY-MIB::hpnicfSecureRalmLogon,,,,,,This trap is sent when a new session is started for an authorised port user. The port on which the violation occured is the first object, and the MAC address of the offending station is in the second object. The authentication mode indicates how the user was authorised. The hpnicfSecureRalmAuthUsername is the identity supplied during the user authentication. The hpnicfSecurePortVlanMembershipList object identifies the VLAN membership assigned to the port on session activation.
.1.3.6.1.4.1.11.2.14.11.15.2.26.1.3.8,HPN-ICF-PORT-SECURITY-MIB::hpnicfSecureRalmLogoff,,,,,,This trap is sent when a new session is started for an authorised port user. The port on which the violation occured is the first object, and the MAC address of the offending station is in the second object. The authentication mode indicates how the user was authorised. The hpnicfSecureRalmAuthUsername is the identity supplied during the user authentication. The hpnicfSecurePortVlanMembershipList object identifies the VLAN membership assigned to the port on session activation.
.1.3.6.1.4.1.11.2.14.11.15.2.27,HPN-ICF-OID-MIB::hpnicfVpls,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.2.28,HPN-ICF-OID-MIB::hpnicfE1,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.2.28.1,HPN-ICF-E1-MIB::hpnicfe1InterfaceStatusTable,,not-accessible,,current,,This table contains E1 interface packet statistics 
.1.3.6.1.4.1.11.2.14.11.15.2.28.1.1,HPN-ICF-E1-MIB::hpnicfe1InterfaceStatusEntry,,not-accessible,ifIndex,current,,This entry contains E1 interface packet statistics. The index of this Entry is ifIndex defined in ifTable of RFC1213-MIB
.1.3.6.1.4.1.11.2.14.11.15.2.28.1.1.1,HPN-ICF-E1-MIB::hpnicfe1InterfaceInErrs,Counter32,read-only,,current,,The total number of error received on this interface
.1.3.6.1.4.1.11.2.14.11.15.2.28.1.1.2,HPN-ICF-E1-MIB::hpnicfe1InterfaceInRuntsErrs,Counter32,read-only,,current,,The number of Runts Error(too short packet) received on this interface
.1.3.6.1.4.1.11.2.14.11.15.2.28.1.1.3,HPN-ICF-E1-MIB::hpnicfe1InterfaceInGiantsErrs,Counter32,read-only,,current,,The number of Giants Error(too long packet) received on this interface
.1.3.6.1.4.1.11.2.14.11.15.2.28.1.1.4,HPN-ICF-E1-MIB::hpnicfe1InterfaceInCrcErrs,Counter32,read-only,,current,,The number of CRC Error received on this interface
.1.3.6.1.4.1.11.2.14.11.15.2.28.1.1.5,HPN-ICF-E1-MIB::hpnicfe1InterfaceInAlignErrs,Counter32,read-only,,current,,The number of Align Error received on this interface
.1.3.6.1.4.1.11.2.14.11.15.2.28.1.1.6,HPN-ICF-E1-MIB::hpnicfe1InterfaceInOverRunsErrs,Counter32,read-only,,current,,The number of Over Runs Error received on this interface
.1.3.6.1.4.1.11.2.14.11.15.2.28.1.1.7,HPN-ICF-E1-MIB::hpnicfe1InterfaceInDribblesErrs,Counter32,read-only,,current,,The number of dribble packets received
.1.3.6.1.4.1.11.2.14.11.15.2.28.1.1.8,HPN-ICF-E1-MIB::hpnicfe1InterfaceInAbortedSeqErrs,Counter32,read-only,,current,,The number of AbortedSeq Error received on this interface
.1.3.6.1.4.1.11.2.14.11.15.2.28.1.1.9,HPN-ICF-E1-MIB::hpnicfe1InterfaceInNoBufferErrs,Counter32,read-only,,current,,The number of Error (no buffer available)
.1.3.6.1.4.1.11.2.14.11.15.2.28.1.1.10,HPN-ICF-E1-MIB::hpnicfe1InterfaceInFramingErrs,Counter32,read-only,,current,,The number of framing Errors
.1.3.6.1.4.1.11.2.14.11.15.2.28.1.1.11,HPN-ICF-E1-MIB::hpnicfe1InterfaceOutputErrs,Counter32,read-only,,current,,The number of total Error transmited on this interface
.1.3.6.1.4.1.11.2.14.11.15.2.28.1.1.12,HPN-ICF-E1-MIB::hpnicfe1InterfaceOutUnderRunErrs,Counter32,read-only,,current,,The number of UnderRun Error transmited on this interface
.1.3.6.1.4.1.11.2.14.11.15.2.28.1.1.13,HPN-ICF-E1-MIB::hpnicfe1InterfaceOutCollisonsErrs,Counter32,read-only,,current,,The number of Collisions Error transmited on this interface
.1.3.6.1.4.1.11.2.14.11.15.2.28.1.1.14,HPN-ICF-E1-MIB::hpnicfe1InterfaceOutDeferedErrs,Counter32,read-only,,current,,The number of Deferred Error transmited on this interface
.1.3.6.1.4.1.11.2.14.11.15.2.28.2,HPN-ICF-E1-MIB::hpnicfe1Table,,not-accessible,,current,,A list of E1 interface entries.
.1.3.6.1.4.1.11.2.14.11.15.2.28.2.1,HPN-ICF-E1-MIB::hpnicfe1Entry,,not-accessible,ifIndex,current,,This entry contains E1 interface management information.
.1.3.6.1.4.1.11.2.14.11.15.2.28.2.1.1,HPN-ICF-E1-MIB::hpnicfe1Type,BITS,read-only,,current,voice(0):pos(1),Specifies the type of the E1 interface. Now it supports types as follow: voice voice type pos POS type
.1.3.6.1.4.1.11.2.14.11.15.2.28.2.1.2,HPN-ICF-E1-MIB::hpnicfe1Clock,INTEGER,read-write,,current,slave(1):master(2):internal(3):line(4):linePri(5),Specifies the clock type used on the E1 interface.
.1.3.6.1.4.1.11.2.14.11.15.2.28.2.1.3,HPN-ICF-E1-MIB::hpnicfe1FrameFormat,INTEGER,read-write,,current,crc4(1):nocrc4(2),Specifies the frame format used on the E1 interface.
.1.3.6.1.4.1.11.2.14.11.15.2.28.2.1.4,HPN-ICF-E1-MIB::hpnicfe1LineCode,INTEGER,read-write,,current,ami(1):hdb3(3),Specifies the line code type used on the E1 interface.
.1.3.6.1.4.1.11.2.14.11.15.2.28.2.1.5,HPN-ICF-E1-MIB::hpnicfe1PriSetTimeSlot,OCTET,read-write,,current,,This is a bit-map of PRI time slots used on the E1 interface. It needs to administratively shut down the D channel of the E1 interface before cancelling PRI time slots.
.1.3.6.1.4.1.11.2.14.11.15.2.28.2.1.6,HPN-ICF-E1-MIB::hpnicfe1DChannelIndex,Integer32,read-only,,current,,This is the ifIndex of the D channel of the E1 interface.
.1.3.6.1.4.1.11.2.14.11.15.2.28.2.1.7,HPN-ICF-E1-MIB::hpnicfe1SubScribLineChannelIndex,Integer32,read-only,,current,,This is the ifIndex of the subscriber-line channel of the E1 interface.
.1.3.6.1.4.1.11.2.14.11.15.2.28.2.1.8,HPN-ICF-E1-MIB::hpnicfe1FcmChannelIndex,Integer32,read-only,,current,,This is the ifIndex of the FCM (Fast Connection Modem) channel of the E1 interface.
.1.3.6.1.4.1.11.2.14.11.15.2.28.3,HPN-ICF-E1-MIB::hpnicfe1InterfaceTable,,not-accessible,,current,,A list of channels of E1 interface entries. Including D channels and subscriber-line channels.
.1.3.6.1.4.1.11.2.14.11.15.2.28.3.1,HPN-ICF-E1-MIB::hpnicfe1InterfaceEntry,,not-accessible,ifIndex,current,,This entry contains channels of E1 interface management information. Including D channels and subscriber-line channels.
.1.3.6.1.4.1.11.2.14.11.15.2.28.3.1.1,HPN-ICF-E1-MIB::hpnicfe1ControllerIndex,Integer32,read-only,,current,,Which E1 interface is this channel belonged to.
.1.3.6.1.4.1.11.2.14.11.15.2.28.4,HPN-ICF-E1-MIB::hpnicfe1TimeSlotSetTable,,not-accessible,,current,,A list of time slot set information of E1 interface entries.
.1.3.6.1.4.1.11.2.14.11.15.2.28.4.1,HPN-ICF-E1-MIB::hpnicfe1TimeSlotSetEntry,,not-accessible,ifIndex,current,,This entry contains time slot set information of E1 interface.
.1.3.6.1.4.1.11.2.14.11.15.2.28.4.1.1,HPN-ICF-E1-MIB::hpnicfe1TimeSlotSetGroupId,Integer32,read-create,,current,,Group ID.
.1.3.6.1.4.1.11.2.14.11.15.2.28.4.1.2,HPN-ICF-E1-MIB::hpnicfe1TimeSlotSetSignalType,INTEGER,read-create,,current,unkown(1):em-delay(2):em-immediate(3):em-wink(4):fxo-ground(5):fxo-loop(6):fxs-ground(7):fxs-loop(8):r2(9),Signal type. Now it supports types as follow: unkown, unkown em-delay E&M Delay Dial em-immediate E&M Immediate Start em-wink E&M Wink Start fxo-ground FXO Ground Start fxo-loop FXO Loop Start fxs-ground FXS Ground Start fxs-loop FXS Loop Start r2 R2 ITU Q421
.1.3.6.1.4.1.11.2.14.11.15.2.28.4.1.3,HPN-ICF-E1-MIB::hpnicfe1TimeSlotSetList,OCTET,read-create,,current,,Time slot bit map.
.1.3.6.1.4.1.11.2.14.11.15.2.28.4.1.4,HPN-ICF-E1-MIB::hpnicfe1TimeSlotSetRowStatus,INTEGER,read-create,,current,active(1):notInService(2):notReady(3):createAndGo(4):createAndWait(5):destroy(6),Operation status.
.1.3.6.1.4.1.11.2.14.11.15.2.29,HPN-ICF-OID-MIB::hpnicfT1,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.2.29.1,HPN-ICF-T1-MIB::hpnicft1InterfaceStatusTable,,not-accessible,,current,,This table contains interface packet statistics 
.1.3.6.1.4.1.11.2.14.11.15.2.29.1.1,HPN-ICF-T1-MIB::hpnicft1InterfaceStatusEntry,,not-accessible,ifIndex,current,,This entry contains interface packet statistics. The index of this Entry is ifIndex defined in ifTable of RFC1213-MIB
.1.3.6.1.4.1.11.2.14.11.15.2.29.1.1.1,HPN-ICF-T1-MIB::hpnicft1InterfaceInErrs,Counter32,read-only,,current,,The total number of error received on this interface
.1.3.6.1.4.1.11.2.14.11.15.2.29.1.1.2,HPN-ICF-T1-MIB::hpnicft1InterfaceInRuntsErrs,Counter32,read-only,,current,,The number of Runts Error(too short packet) received on this interface
.1.3.6.1.4.1.11.2.14.11.15.2.29.1.1.3,HPN-ICF-T1-MIB::hpnicft1InterfaceInGiantsErrs,Counter32,read-only,,current,,The number of Giants Error(too long packet) received on this interface
.1.3.6.1.4.1.11.2.14.11.15.2.29.1.1.4,HPN-ICF-T1-MIB::hpnicft1InterfaceInCrcErrs,Counter32,read-only,,current,,The number of CRC Error received on this interface
.1.3.6.1.4.1.11.2.14.11.15.2.29.1.1.5,HPN-ICF-T1-MIB::hpnicft1InterfaceInAlignErrs,Counter32,read-only,,current,,The number of Align Error received on this interface
.1.3.6.1.4.1.11.2.14.11.15.2.29.1.1.6,HPN-ICF-T1-MIB::hpnicft1InterfaceInOverRunsErrs,Counter32,read-only,,current,,The number of Over Runs Error received on this interface
.1.3.6.1.4.1.11.2.14.11.15.2.29.1.1.7,HPN-ICF-T1-MIB::hpnicft1InterfaceInDribblesErrs,Counter32,read-only,,current,,The number of dribble packets received
.1.3.6.1.4.1.11.2.14.11.15.2.29.1.1.8,HPN-ICF-T1-MIB::hpnicft1InterfaceInAbortedSeqErrs,Counter32,read-only,,current,,The number of AbortedSeq Error received on this interface
.1.3.6.1.4.1.11.2.14.11.15.2.29.1.1.9,HPN-ICF-T1-MIB::hpnicft1InterfaceInNoBufferErrs,Counter32,read-only,,current,,The number of Error (no buffer available)
.1.3.6.1.4.1.11.2.14.11.15.2.29.1.1.10,HPN-ICF-T1-MIB::hpnicft1InterfaceInFramingErrs,Counter32,read-only,,current,,The number of framing Errors
.1.3.6.1.4.1.11.2.14.11.15.2.29.1.1.11,HPN-ICF-T1-MIB::hpnicft1InterfaceOutputErrs,Counter32,read-only,,current,,The number of total Error transmited on this interface
.1.3.6.1.4.1.11.2.14.11.15.2.29.1.1.12,HPN-ICF-T1-MIB::hpnicft1InterfaceOutUnderRunErrs,Counter32,read-only,,current,,The number of UnderRun Error transmited on this interface
.1.3.6.1.4.1.11.2.14.11.15.2.29.1.1.13,HPN-ICF-T1-MIB::hpnicft1InterfaceOutCollisonsErrs,Counter32,read-only,,current,,The number of Collisions Error transmited on this interface
.1.3.6.1.4.1.11.2.14.11.15.2.29.1.1.14,HPN-ICF-T1-MIB::hpnicft1InterfaceOutDeferedErrs,Counter32,read-only,,current,,The number of Deferred Error transmited on this interface
.1.3.6.1.4.1.11.2.14.11.15.2.29.2,HPN-ICF-T1-MIB::hpnicft1Table,,not-accessible,,current,,A list of T1 interface entries.
.1.3.6.1.4.1.11.2.14.11.15.2.29.2.1,HPN-ICF-T1-MIB::hpnicft1Entry,,not-accessible,ifIndex,current,,This entry contains T1 interface management information.
.1.3.6.1.4.1.11.2.14.11.15.2.29.2.1.1,HPN-ICF-T1-MIB::hpnicft1Type,BITS,read-only,,current,voice(0),Specifies the type of the T1 interface.
.1.3.6.1.4.1.11.2.14.11.15.2.29.2.1.2,HPN-ICF-T1-MIB::hpnicft1Clock,INTEGER,read-write,,current,slave(1):master(2):internal(3):line(4):linePri(5),Specifies the clock type used on the T1 interface.
.1.3.6.1.4.1.11.2.14.11.15.2.29.2.1.3,HPN-ICF-T1-MIB::hpnicft1FrameFormat,INTEGER,read-write,,current,sf(1):esf(2),Specifies the frame format used on the T1 interface.
.1.3.6.1.4.1.11.2.14.11.15.2.29.2.1.4,HPN-ICF-T1-MIB::hpnicft1LineCode,INTEGER,read-write,,current,ami(1):b8zs(2),Specifies the line code type used on the T1 interface.
.1.3.6.1.4.1.11.2.14.11.15.2.29.2.1.5,HPN-ICF-T1-MIB::hpnicft1PriSetTimeSlot,OCTET,read-write,,current,,This is a bit-map of PRI time slots used on the T1 interface. It needs to administratively shut down the D channel of the T1 interface before cancelling PRI time slots.
.1.3.6.1.4.1.11.2.14.11.15.2.29.2.1.6,HPN-ICF-T1-MIB::hpnicft1DChannelIndex,Integer32,read-only,,current,,This is the ifIndex of the D channel of the T1 interface.
.1.3.6.1.4.1.11.2.14.11.15.2.29.2.1.7,HPN-ICF-T1-MIB::hpnicft1SubScribLineChannelIndex,Integer32,read-only,,current,,This is the ifIndex of the subscriber-line channel of the T1 interface.
.1.3.6.1.4.1.11.2.14.11.15.2.29.3,HPN-ICF-T1-MIB::hpnicft1InterfaceTable,,not-accessible,,current,,A list of channels of T1 interface entries. Including D channels and subscriber-line channels.
.1.3.6.1.4.1.11.2.14.11.15.2.29.3.1,HPN-ICF-T1-MIB::hpnicft1InterfaceEntry,,not-accessible,ifIndex,current,,This entry contains channels of T1 interface management information. Including D channels and subscriber-line channels.
.1.3.6.1.4.1.11.2.14.11.15.2.29.3.1.1,HPN-ICF-T1-MIB::hpnicft1ControllerIndex,Integer32,read-only,,current,,Which T1 interface is this channel belonged to.
.1.3.6.1.4.1.11.2.14.11.15.2.30,HPN-ICF-OID-MIB::hpnicfIKEMonitor,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.2.30.1,HPN-ICF-IKE-MONITOR-MIB::hpnicfIKEObjects,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.2.30.1.1,HPN-ICF-IKE-MONITOR-MIB::hpnicfIKETunnelTable,,not-accessible,,current,,The IPsec Phase-1 Internet Key Exchange Tunnel Table. There is one entry in this table for each active IPsec Phase-1 IKE Tunnel.
.1.3.6.1.4.1.11.2.14.11.15.2.30.1.1.1,HPN-ICF-IKE-MONITOR-MIB::hpnicfIKETunnelEntry,,not-accessible,hpnicfIKETunIndex,current,,The entry contains the information about hpnicfIKETunnelTable, such as negotiate mode, encryption algorithm and authentication algorithm, etc.
.1.3.6.1.4.1.11.2.14.11.15.2.30.1.1.1.1,HPN-ICF-IKE-MONITOR-MIB::hpnicfIKETunIndex,Integer32,accessible-for-notify,,current,,The index of the IPsec Phase-1 IKE Tunnel Table. The value of the index is a number which begins at one and is incremented with each tunnel that is created. The value of this object will wrap at 2147483647.
.1.3.6.1.4.1.11.2.14.11.15.2.30.1.1.1.2,HPN-ICF-IKE-MONITOR-MIB::hpnicfIKETunLocalType,INTEGER,read-only,,current,reserved(0):ipv4Addr(1):fqdn(2):userFqdn(3):ipv4AddrSubnet(4):ipv6Addr(5):ipv6AddrSubnet(6):ipv4AddrRange(7):ipv6AddrRange(8):derAsn1Dn(9):derAsn1Gn(10):keyId(11),The type of local peer identity.
.1.3.6.1.4.1.11.2.14.11.15.2.30.1.1.1.3,HPN-ICF-IKE-MONITOR-MIB::hpnicfIKETunLocalValue1,OCTET,read-only,,current,,The value of the local peer identity. If the local peer type is ipv4Addr/ipv6Addr, this is the IP address used to identify the local peer. If the local peer type is ipv4AddrSubnet/ipv6AddrSubnet, this is the subnet address. If the local peer type is ipv4AddrRange/ipv6AddrRange, this is the beginning IP address of the range. If the local peer type is fqdn/userFqdn, this is the host name used to identify the local peer. If the local peer type is derAsn1Dn, this is the binary DER encoding of an ASN.1 X.500 Distinguished Name [X.501] of the principal whose certificates are being exchanged to establish the SA. If the local peer type is derAsn1Gn, this is the binary DER encoding of an ASN.1 X.500 GeneralName [X.509] of the principal whose certificates are being exchanged to establish the SA. If the local peer type is keyId, this is an opaque byte stream which may be used to pass vendor-specific information necessary to identify which pre-shared key should be used to authenticate Aggressive mode negotiations.
.1.3.6.1.4.1.11.2.14.11.15.2.30.1.1.1.4,HPN-ICF-IKE-MONITOR-MIB::hpnicfIKETunLocalValue2,OCTET,read-only,,current,,The second specification of the local peer's IP address. If the local peer type is ipv4AddrSubnet/ipv6AddrSubnet, this is the subnet mask. If the local peer type is ipv4AddrRange/ipv6AddrRange, this is the ending IP address of the range. If the local peer type are others, this is a zero-length string.
.1.3.6.1.4.1.11.2.14.11.15.2.30.1.1.1.5,HPN-ICF-IKE-MONITOR-MIB::hpnicfIKETunLocalAddr,IpAddress,read-only,,deprecated,,The IP address of the local endpoint for the IPsec Phase-1 IKE Tunnel.
.1.3.6.1.4.1.11.2.14.11.15.2.30.1.1.1.6,HPN-ICF-IKE-MONITOR-MIB::hpnicfIKETunRemoteType,INTEGER,read-only,,current,reserved(0):ipv4Addr(1):fqdn(2):userFqdn(3):ipv4AddrSubnet(4):ipv6Addr(5):ipv6AddrSubnet(6):ipv4AddrRange(7):ipv6AddrRange(8):derAsn1Dn(9):derAsn1Gn(10):keyId(11),The type of remote peer identity.
.1.3.6.1.4.1.11.2.14.11.15.2.30.1.1.1.7,HPN-ICF-IKE-MONITOR-MIB::hpnicfIKETunRemoteValue1,OCTET,read-only,,current,,The value of the remote peer identity. If the remote peer type is ipv4Addr/ipv6Addr, this is the IP address used to identify the remote peer. If the remote peer type is ipv4AddrSubnet/ipv6AddrSubnet, this is the subnet address. If the remote peer type is ipv4AddrRange/ipv6AddrRange, this is the beginning IP address of the range. If the remote peer type is fqdn/userFqdn, this is the host name used to identify the remote peer. If the remote peer type is derAsn1Dn, this is the binary DER encoding of an ASN.1 X.500 Distinguished Name [X.501] of the principal whose certificates are being exchanged to establish the SA. If the remote peer type is derAsn1Gn, this is the binary DER encoding of an ASN.1 X.500 GeneralName [X.509] of the principal whose certificates are being exchanged to establish the SA. If the remote peer type is keyId, this is an opaque byte stream which may be used to pass vendor-specific information necessary to identify which pre-shared key should be used to authenticate Aggressive mode negotiations.
.1.3.6.1.4.1.11.2.14.11.15.2.30.1.1.1.8,HPN-ICF-IKE-MONITOR-MIB::hpnicfIKETunRemoteValue2,OCTET,read-only,,current,,The second specification of the remote peer's IP address. If the remote peer type is ipv4AddrSubnet/ipv6AddrSubnet, this is the subnet mask. If the remote peer type is ipv4AddrRange/ipv6AddrRange, this is the ending IP address of the range. If the remote peer type are others, this is a zero-length string.
.1.3.6.1.4.1.11.2.14.11.15.2.30.1.1.1.9,HPN-ICF-IKE-MONITOR-MIB::hpnicfIKETunRemoteAddr,IpAddress,read-only,,deprecated,,The IP address of the remote peer for the IPsec Phase-1 IKE Tunnel.
.1.3.6.1.4.1.11.2.14.11.15.2.30.1.1.1.10,HPN-ICF-IKE-MONITOR-MIB::hpnicfIKETunInitiator,INTEGER,read-only,,current,local(1):remote(2),The initiator of this tunnel.
.1.3.6.1.4.1.11.2.14.11.15.2.30.1.1.1.11,HPN-ICF-IKE-MONITOR-MIB::hpnicfIKETunNegoMode,INTEGER,read-only,,current,mainMode(2):aggressiveMode(4):quickMode(32),The negotiation mode of the IPsec Phase-1 IKE Tunnel.
.1.3.6.1.4.1.11.2.14.11.15.2.30.1.1.1.12,HPN-ICF-IKE-MONITOR-MIB::hpnicfIKETunDiffHellmanGrp,INTEGER,read-only,,current,none(0):dhGroup1(1):dhGroup2(2):dhGroup5(5):dhGroup14(14):dhGroup24(24):invalidGroup(2147483647),The Diffie Hellman Group used in the IPsec Phase-1 IKE negotiations.
.1.3.6.1.4.1.11.2.14.11.15.2.30.1.1.1.13,HPN-ICF-IKE-MONITOR-MIB::hpnicfIKETunEncryptAlgo,INTEGER,read-only,,current,none(0):desCbc(1):ideaCbc(2):blowfishCbc(3):rc5R16B64Cbc(4):tripleDesCbc(5):castCbc(6):aesCbc(7):aesCbc128(8):aesCbc192(9):aesCbc256(10):aesCtr(11):aesCamelliaCbc(12):rc4(13):invalidAlg(2147483647),The encryption algorithm used in the IPsec Phase-1 IKE negotiations.
.1.3.6.1.4.1.11.2.14.11.15.2.30.1.1.1.14,HPN-ICF-IKE-MONITOR-MIB::hpnicfIKETunHashAlgo,INTEGER,read-only,,current,none(0):md5(1):sha1(2):sha256(3):sha384(4):sha512(5):invalidAlg(2147483647),The hash algorithm used in the IPsec Phase-1 IKE negotiations.
.1.3.6.1.4.1.11.2.14.11.15.2.30.1.1.1.15,HPN-ICF-IKE-MONITOR-MIB::hpnicfIKETunAuthMethod,INTEGER,read-only,,current,preSharedKey(1):dsaSignatures(2):rsaSignatures(3),The authentication method used in the IPsec Phase-1 IKE negotiations.
.1.3.6.1.4.1.11.2.14.11.15.2.30.1.1.1.16,HPN-ICF-IKE-MONITOR-MIB::hpnicfIKETunLifeTime,Integer32,read-only,,current,,The negotiated LifeTime of the IPsec Phase-1 IKE Tunnel in seconds.
.1.3.6.1.4.1.11.2.14.11.15.2.30.1.1.1.17,HPN-ICF-IKE-MONITOR-MIB::hpnicfIKETunActiveTime,Integer32,read-only,,current,,The duration the IPsec Phase-1 IKE tunnel has been active in seconds.
.1.3.6.1.4.1.11.2.14.11.15.2.30.1.1.1.18,HPN-ICF-IKE-MONITOR-MIB::hpnicfIKETunRemainTime,Integer32,read-only,,current,,The security association remaining time in seconds.
.1.3.6.1.4.1.11.2.14.11.15.2.30.1.1.1.19,HPN-ICF-IKE-MONITOR-MIB::hpnicfIKETunTotalRefreshes,Counter32,read-only,,current,,The total number of security association refreshing performed.
.1.3.6.1.4.1.11.2.14.11.15.2.30.1.1.1.20,HPN-ICF-IKE-MONITOR-MIB::hpnicfIKETunState,INTEGER,read-only,,current,active(1):timeout(2),The State of IKE Tunnel.
.1.3.6.1.4.1.11.2.14.11.15.2.30.1.1.1.21,HPN-ICF-IKE-MONITOR-MIB::hpnicfIKETunDpdIntervalTime,Integer32,read-only,,current,,The time that trigger DPD request. If ipsec message is expected to be sent out and the interval time between current time and the last time receiving peer's IPsec message is bigger than this time, DPD request would be triggered.
.1.3.6.1.4.1.11.2.14.11.15.2.30.1.1.1.22,HPN-ICF-IKE-MONITOR-MIB::hpnicfIKETunDpdTimeOut,Integer32,read-only,,current,,The overtime of single DPD request. If DPD requests are refused three times, all security associations related would be deleted.
.1.3.6.1.4.1.11.2.14.11.15.2.30.1.1.1.23,HPN-ICF-IKE-MONITOR-MIB::hpnicfIKETunLocalInetAddrType,INTEGER,read-only,,current,unknown(0):ipv4(1):ipv6(2):ipv4z(3):ipv6z(4):dns(16),The type of the local peer's IP address.
.1.3.6.1.4.1.11.2.14.11.15.2.30.1.1.1.24,HPN-ICF-IKE-MONITOR-MIB::hpnicfIKETunLocalInetAddr,OCTET,read-only,,current,,The IP address of the local peer for the IPsec Phase-1 IKE Tunnel.
.1.3.6.1.4.1.11.2.14.11.15.2.30.1.1.1.25,HPN-ICF-IKE-MONITOR-MIB::hpnicfIKETunRemoteInetAddrType,INTEGER,read-only,,current,unknown(0):ipv4(1):ipv6(2):ipv4z(3):ipv6z(4):dns(16),The type of the remote peer's IP address.
.1.3.6.1.4.1.11.2.14.11.15.2.30.1.1.1.26,HPN-ICF-IKE-MONITOR-MIB::hpnicfIKETunRemoteInetAddr,OCTET,read-only,,current,,The IP address of the remote peer for the IPsec Phase-1 IKE Tunnel.
.1.3.6.1.4.1.11.2.14.11.15.2.30.1.2,HPN-ICF-IKE-MONITOR-MIB::hpnicfIKETunnelStatTable,,not-accessible,,current,,The IPsec Phase-1 IKE Tunnel Statistic Table.
.1.3.6.1.4.1.11.2.14.11.15.2.30.1.2.1,HPN-ICF-IKE-MONITOR-MIB::hpnicfIKETunnelStatEntry,,not-accessible,hpnicfIKETunIndex,current,,The entry contains the information of hpnicfIKETunnelStatTable, such as the number of packets sent and received by the IKE tunnel, etc.
.1.3.6.1.4.1.11.2.14.11.15.2.30.1.2.1.1,HPN-ICF-IKE-MONITOR-MIB::hpnicfIKETunInOctets,Counter64,read-only,,current,,The total number of octets received by this IPsec Phase-1 IKE Tunnel.
.1.3.6.1.4.1.11.2.14.11.15.2.30.1.2.1.2,HPN-ICF-IKE-MONITOR-MIB::hpnicfIKETunInPkts,Counter64,read-only,,current,,The total number of packets received by this IPsec Phase-1 IKE Tunnel.
.1.3.6.1.4.1.11.2.14.11.15.2.30.1.2.1.3,HPN-ICF-IKE-MONITOR-MIB::hpnicfIKETunInDropPkts,Counter64,read-only,,current,,The total number of packets dropped by this IPsec Phase-1 IKE Tunnel during receiving process.
.1.3.6.1.4.1.11.2.14.11.15.2.30.1.2.1.4,HPN-ICF-IKE-MONITOR-MIB::hpnicfIKETunInP2Exchgs,Counter64,read-only,,current,,The total number of IPsec Phase-2 exchanges received by this IPsec Phase-1 IKE Tunnel.
.1.3.6.1.4.1.11.2.14.11.15.2.30.1.2.1.5,HPN-ICF-IKE-MONITOR-MIB::hpnicfIKETunInP2ExchgRejets,Counter64,read-only,,current,,The total number of IPsec Phase-2 exchanges received and rejected by this IPsec Phase-1 Tunnel.
.1.3.6.1.4.1.11.2.14.11.15.2.30.1.2.1.6,HPN-ICF-IKE-MONITOR-MIB::hpnicfIKETunInP2SaDelRequests,Counter64,read-only,,current,,The total number of IPsec Phase-2 security association deleting requests received by this IPsec Phase-1 IKE Tunnel.
.1.3.6.1.4.1.11.2.14.11.15.2.30.1.2.1.7,HPN-ICF-IKE-MONITOR-MIB::hpnicfIKETunInP1SaDelRequests,Counter64,read-only,,current,,The total number of IPsec Phase-1 security association deleting requests.
.1.3.6.1.4.1.11.2.14.11.15.2.30.1.2.1.8,HPN-ICF-IKE-MONITOR-MIB::hpnicfIKETunInNotifys,Counter32,read-only,,current,,The total number of notifications received by this IPsec Phase-1 IKE Tunnel.
.1.3.6.1.4.1.11.2.14.11.15.2.30.1.2.1.9,HPN-ICF-IKE-MONITOR-MIB::hpnicfIKETunOutOctets,Counter64,read-only,,current,,The total number of octets sent by this IPsec Phase-1 IKE Tunnel.
.1.3.6.1.4.1.11.2.14.11.15.2.30.1.2.1.10,HPN-ICF-IKE-MONITOR-MIB::hpnicfIKETunOutPkts,Counter64,read-only,,current,,The total number of packets sent by this IPsec Phase-1 IKE Tunnel.
.1.3.6.1.4.1.11.2.14.11.15.2.30.1.2.1.11,HPN-ICF-IKE-MONITOR-MIB::hpnicfIKETunOutDropPkts,Counter64,read-only,,current,,The total number of packets dropped by this IPsec Phase-1 IKE Tunnel during sending process.
.1.3.6.1.4.1.11.2.14.11.15.2.30.1.2.1.12,HPN-ICF-IKE-MONITOR-MIB::hpnicfIKETunOutP2Exchgs,Counter64,read-only,,current,,The total number of IPsec Phase-2 exchanges sent by this IPsec Phase-1 IKE Tunnel.
.1.3.6.1.4.1.11.2.14.11.15.2.30.1.2.1.13,HPN-ICF-IKE-MONITOR-MIB::hpnicfIKETunOutP2ExchgRejects,Counter64,read-only,,current,,The total number of IPsec Phase-2 exchanges sent and rejected by this IPsec Phase-1 IKE Tunnel.
.1.3.6.1.4.1.11.2.14.11.15.2.30.1.2.1.14,HPN-ICF-IKE-MONITOR-MIB::hpnicfIKETunOutP2SaDelRequests,Counter64,read-only,,current,,The total number of IPsec Phase-2 security association deleting requests sent by this IPsec Phase-1 IKE Tunnel.
.1.3.6.1.4.1.11.2.14.11.15.2.30.1.2.1.15,HPN-ICF-IKE-MONITOR-MIB::hpnicfIKETunOutP1SaDelRequests,Counter64,read-only,,current,,The total number of IPsec Phase-1 security association deleting requests sent by this IPsec Phase-1 IKE Tunnel.
.1.3.6.1.4.1.11.2.14.11.15.2.30.1.2.1.16,HPN-ICF-IKE-MONITOR-MIB::hpnicfIKETunOutNotifys,Counter32,read-only,,current,,The total number of notifications sent by this IPsec Phase-1 Tunnel.
.1.3.6.1.4.1.11.2.14.11.15.2.30.1.3,HPN-ICF-IKE-MONITOR-MIB::hpnicfIKEGlobalStats,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.2.30.1.3.1,HPN-ICF-IKE-MONITOR-MIB::hpnicfIKEGlobalActiveTunnels,Gauge32,read-only,,current,,The number of currently active IPsec Phase-1 IKE Tunnels.
.1.3.6.1.4.1.11.2.14.11.15.2.30.1.3.2,HPN-ICF-IKE-MONITOR-MIB::hpnicfIKEGlobalInOctets,Counter64,read-only,,current,,The total number of octets received by all currently and previously active IPsec Phase-1 IKE Tunnels.
.1.3.6.1.4.1.11.2.14.11.15.2.30.1.3.3,HPN-ICF-IKE-MONITOR-MIB::hpnicfIKEGlobalInPkts,Counter64,read-only,,current,,The total number of packets received by all currently and previously active IPsec Phase-1 IKE Tunnels.
.1.3.6.1.4.1.11.2.14.11.15.2.30.1.3.4,HPN-ICF-IKE-MONITOR-MIB::hpnicfIKEGlobalInDropPkts,Counter64,read-only,,current,,The total number of packets which were dropped during receiving process by all currently and previously active IPsec Phase-1 IKE Tunnels.
.1.3.6.1.4.1.11.2.14.11.15.2.30.1.3.5,HPN-ICF-IKE-MONITOR-MIB::hpnicfIKEGlobalInP2Exchgs,Counter64,read-only,,current,,The total number of IPsec Phase-2 exchanges received by all currently and previously active IPsec Phase-1 IKE Tunnels.
.1.3.6.1.4.1.11.2.14.11.15.2.30.1.3.6,HPN-ICF-IKE-MONITOR-MIB::hpnicfIKEGlobalInP2ExchgRejects,Counter64,read-only,,current,,The total number of IPsec Phase-2 exchanges which were received and rejected by all currently and previously active IPsec Phase-1 IKE Tunnels.
.1.3.6.1.4.1.11.2.14.11.15.2.30.1.3.7,HPN-ICF-IKE-MONITOR-MIB::hpnicfIKEGlobalInP2SaDelRequests,Counter64,read-only,,current,,The total number of IPsec Phase-2 security association deleting requests received by all currently and previously active IPsec Phase-1 IKE Tunnels.
.1.3.6.1.4.1.11.2.14.11.15.2.30.1.3.8,HPN-ICF-IKE-MONITOR-MIB::hpnicfIKEGlobalInNotifys,Counter32,read-only,,current,,The total number of notifications received by all IPsec Phase-1 IKE Tunnels.
.1.3.6.1.4.1.11.2.14.11.15.2.30.1.3.9,HPN-ICF-IKE-MONITOR-MIB::hpnicfIKEGlobalOutOctets,Counter64,read-only,,current,,The total number of octets sent by all currently and previously active and IPsec Phase-1 IKE Tunnels. 
.1.3.6.1.4.1.11.2.14.11.15.2.30.1.3.10,HPN-ICF-IKE-MONITOR-MIB::hpnicfIKEGlobalOutPkts,Counter64,read-only,,current,,The total number of packets sent by all currently and previously active and IPsec Phase-1 Tunnels.
.1.3.6.1.4.1.11.2.14.11.15.2.30.1.3.11,HPN-ICF-IKE-MONITOR-MIB::hpnicfIKEGlobalOutDropPkts,Counter64,read-only,,current,,The total number of packets which were dropped during sending process by all currently and previously active IPsec Phase-1 IKE Tunnels.
.1.3.6.1.4.1.11.2.14.11.15.2.30.1.3.12,HPN-ICF-IKE-MONITOR-MIB::hpnicfIKEGlobalOutP2Exchgs,Counter64,read-only,,current,,The total number of IPsec Phase-2 exchanges which were sent by all currently and previously active IPsec Phase-1 IKE Tunnels.
.1.3.6.1.4.1.11.2.14.11.15.2.30.1.3.13,HPN-ICF-IKE-MONITOR-MIB::hpnicfIKEGlobalOutP2ExchgRejects,Counter64,read-only,,current,,The total number of IPsec Phase-2 exchanges which were sent and rejected by all currently and previously active IPsec Phase-1 IKE Tunnels.
.1.3.6.1.4.1.11.2.14.11.15.2.30.1.3.14,HPN-ICF-IKE-MONITOR-MIB::hpnicfIKEGlobalOutP2SaDelRequests,Counter64,read-only,,current,,The total number of IPsec Phase-2 SA deleting requests sent by all currently and previously active IPsec Phase-1 IKE Tunnels.
.1.3.6.1.4.1.11.2.14.11.15.2.30.1.3.15,HPN-ICF-IKE-MONITOR-MIB::hpnicfIKEGlobalOutNotifys,Counter32,read-only,,current,,The total number of notifications sent by all active IPsec Phase-1 IKE Tunnels.
.1.3.6.1.4.1.11.2.14.11.15.2.30.1.3.16,HPN-ICF-IKE-MONITOR-MIB::hpnicfIKEGlobalInitTunnels,Counter32,read-only,,current,,The total number of IPsec Phase-1 IKE Tunnels which were locally initiated.
.1.3.6.1.4.1.11.2.14.11.15.2.30.1.3.17,HPN-ICF-IKE-MONITOR-MIB::hpnicfIKEGlobalInitTunnelFails,Counter32,read-only,,current,,The total number of IPsec Phase-1 IKE Tunnels which were locally initiated and failed to activate.
.1.3.6.1.4.1.11.2.14.11.15.2.30.1.3.18,HPN-ICF-IKE-MONITOR-MIB::hpnicfIKEGlobalRespTunnels,Counter32,read-only,,current,,The total number of IPsec Phase-1 IKE Tunnels which were remotely initiated.
.1.3.6.1.4.1.11.2.14.11.15.2.30.1.3.19,HPN-ICF-IKE-MONITOR-MIB::hpnicfIKEGlobalRespTunnelFails,Counter32,read-only,,current,,The total number of IPsec Phase-1 IKE Tunnels which were remotely initiated and failed to activate.
.1.3.6.1.4.1.11.2.14.11.15.2.30.1.3.20,HPN-ICF-IKE-MONITOR-MIB::hpnicfIKEGlobalAuthFails,Counter32,read-only,,current,,The total number of authentications which ended in failure by all current and previous IPsec Phase-1 IKE Tunnels.
.1.3.6.1.4.1.11.2.14.11.15.2.30.1.3.21,HPN-ICF-IKE-MONITOR-MIB::hpnicfIKEGlobalNoSaFails,Counter32,read-only,,current,,The total number of non-existent Security Association in failures which occurred during processing of all current and previous IPsec Phase-1 IKE Tunnels.
.1.3.6.1.4.1.11.2.14.11.15.2.30.1.3.22,HPN-ICF-IKE-MONITOR-MIB::hpnicfIKEGlobalInvalidCookieFails,Counter32,read-only,,current,,The total number of invalid cookie in failures which occurred during processing of all current and previous IPsec Phase-1 IKE Tunnels.
.1.3.6.1.4.1.11.2.14.11.15.2.30.1.3.23,HPN-ICF-IKE-MONITOR-MIB::hpnicfIKEGlobalAttrNotSuppFails,Counter32,read-only,,current,,The total number of attributes not supported in failures which occurred during processing of all current and previous IPsec Phase-1 IKE Tunnels.
.1.3.6.1.4.1.11.2.14.11.15.2.30.1.3.24,HPN-ICF-IKE-MONITOR-MIB::hpnicfIKEGlobalNoProposalChosenFails,Counter32,read-only,,current,,The total number of no proposal chosen in failures which occurred during processing of all current and previous IPsec Phase-1 IKE Tunnels.
.1.3.6.1.4.1.11.2.14.11.15.2.30.1.3.25,HPN-ICF-IKE-MONITOR-MIB::hpnicfIKEGlobalUnsportExchTypeFails,Counter32,read-only,,current,,The total number of unsupported exchange type in failures which occurred during processing of all current and previous IPsec Phase-1 IKE Tunnels.
.1.3.6.1.4.1.11.2.14.11.15.2.30.1.3.26,HPN-ICF-IKE-MONITOR-MIB::hpnicfIKEGlobalInvalidIdFails,Counter32,read-only,,current,,The total number of invalid id Information in failures which occurred during processing of all current and previous IPsec Phase-1 IKE Tunnels.
.1.3.6.1.4.1.11.2.14.11.15.2.30.1.3.27,HPN-ICF-IKE-MONITOR-MIB::hpnicfIKEGlobalInvalidProFails,Counter32,read-only,,current,,The total number of invalid protocol id in failures which occurred during processing of all current and previous IPsec Phase-1 IKE Tunnels.
.1.3.6.1.4.1.11.2.14.11.15.2.30.1.3.28,HPN-ICF-IKE-MONITOR-MIB::hpnicfIKEGlobalCertTypeUnsuppFails,Counter32,read-only,,current,,The total number of certificate type unsupported in failures which occurred during processing of all current and previous IPsec Phase-1 IKE Tunnels.
.1.3.6.1.4.1.11.2.14.11.15.2.30.1.3.29,HPN-ICF-IKE-MONITOR-MIB::hpnicfIKEGlobalInvalidCertAuthFails,Counter32,read-only,,current,,The total number of failures because of invalid certificate authority which occurred during processing of all current and previous IPsec Phase-1 IKE Tunnels.
.1.3.6.1.4.1.11.2.14.11.15.2.30.1.3.30,HPN-ICF-IKE-MONITOR-MIB::hpnicfIKEGlobalInvalidSignFails,Counter32,read-only,,current,,The total number of failures because of the invalid signature which occurred during processing of all current and previous IPsec Phase-1 IKE Tunnels.
.1.3.6.1.4.1.11.2.14.11.15.2.30.1.3.31,HPN-ICF-IKE-MONITOR-MIB::hpnicfIKEGlobalCertUnavailableFails,Counter32,read-only,,current,,The total number of certificate unavailable in failures which occurred during processing of all current and previous IPsec Phase-1 IKE Tunnels.
.1.3.6.1.4.1.11.2.14.11.15.2.30.1.4,HPN-ICF-IKE-MONITOR-MIB::hpnicfIKETrapObject,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.2.30.1.4.1,HPN-ICF-IKE-MONITOR-MIB::hpnicfIKEProposalNumber,Integer32,accessible-for-notify,,current,,The IKE proposal's number with a trap.
.1.3.6.1.4.1.11.2.14.11.15.2.30.1.4.2,HPN-ICF-IKE-MONITOR-MIB::hpnicfIKEProposalSize,Integer32,accessible-for-notify,,current,,The number of IKE proposals with a trap.
.1.3.6.1.4.1.11.2.14.11.15.2.30.1.4.3,HPN-ICF-IKE-MONITOR-MIB::hpnicfIKEIdInformation,OCTET,accessible-for-notify,,current,,The id information with a trap.
.1.3.6.1.4.1.11.2.14.11.15.2.30.1.4.4,HPN-ICF-IKE-MONITOR-MIB::hpnicfIKEProtocolNum,Integer32,accessible-for-notify,,current,,The protocol number with a trap
.1.3.6.1.4.1.11.2.14.11.15.2.30.1.4.5,HPN-ICF-IKE-MONITOR-MIB::hpnicfIKECertInformation,OCTET,accessible-for-notify,,current,,The certificate information with a trap.
.1.3.6.1.4.1.11.2.14.11.15.2.30.1.5,HPN-ICF-IKE-MONITOR-MIB::hpnicfIKETrapCntl,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.2.30.1.5.1,HPN-ICF-IKE-MONITOR-MIB::hpnicfIKETrapGlobalCntl,INTEGER,read-write,,current,enabled(1):disabled(2),Indicates whether all IKE traps should be generated.
.1.3.6.1.4.1.11.2.14.11.15.2.30.1.5.2,HPN-ICF-IKE-MONITOR-MIB::hpnicfIKETunnelStartTrapCntl,INTEGER,read-write,,current,enabled(1):disabled(2),Indicates whether hpnicfIKETunnelStart traps should be generated.
.1.3.6.1.4.1.11.2.14.11.15.2.30.1.5.3,HPN-ICF-IKE-MONITOR-MIB::hpnicfIKETunnelStopTrapCntl,INTEGER,read-write,,current,enabled(1):disabled(2),Indicates whether hpnicfIKETunnelStop traps should be generated.
.1.3.6.1.4.1.11.2.14.11.15.2.30.1.5.4,HPN-ICF-IKE-MONITOR-MIB::hpnicfIKENoSaTrapCntl,INTEGER,read-write,,current,enabled(1):disabled(2),Indicates whether hpnicfIKENoSaFailure traps should be generated.
.1.3.6.1.4.1.11.2.14.11.15.2.30.1.5.5,HPN-ICF-IKE-MONITOR-MIB::hpnicfIKEEncryFailureTrapCntl,INTEGER,read-write,,current,enabled(1):disabled(2),Indicates whether hpnicfIKEEncryFailFailure traps should be generated.
.1.3.6.1.4.1.11.2.14.11.15.2.30.1.5.6,HPN-ICF-IKE-MONITOR-MIB::hpnicfIKEDecryFailureTrapCntl,INTEGER,read-write,,current,enabled(1):disabled(2),Indicates whether hpnicfIKEDecryFailFailure traps should be generated.
.1.3.6.1.4.1.11.2.14.11.15.2.30.1.5.7,HPN-ICF-IKE-MONITOR-MIB::hpnicfIKEInvalidProposalTrapCntl,INTEGER,read-write,,current,enabled(1):disabled(2),Indicates whether hpnicfIKEInvalidProposalFailure traps should be generated.
.1.3.6.1.4.1.11.2.14.11.15.2.30.1.5.8,HPN-ICF-IKE-MONITOR-MIB::hpnicfIKEAuthFailTrapCntl,INTEGER,read-write,,current,enabled(1):disabled(2),Indicates whether hpnicfIKEAuthFailFailure traps should be generated.
.1.3.6.1.4.1.11.2.14.11.15.2.30.1.5.9,HPN-ICF-IKE-MONITOR-MIB::hpnicfIKEInvalidCookieTrapCntl,INTEGER,read-write,,current,enabled(1):disabled(2),Indicates whether hpnicfIKEInvalidCookieFailure traps should be generated.
.1.3.6.1.4.1.11.2.14.11.15.2.30.1.5.10,HPN-ICF-IKE-MONITOR-MIB::hpnicfIKEInvalidSpiTrapCntl,INTEGER,read-write,,current,enabled(1):disabled(2),Indicates whether hpnicfIKEInvalidSpiFailure traps should be generated.
.1.3.6.1.4.1.11.2.14.11.15.2.30.1.5.11,HPN-ICF-IKE-MONITOR-MIB::hpnicfIKEAttrNotSuppTrapCntl,INTEGER,read-write,,current,enabled(1):disabled(2),Indicates whether hpnicfIKEAttrNotSuppFailure traps should be generated.
.1.3.6.1.4.1.11.2.14.11.15.2.30.1.5.12,HPN-ICF-IKE-MONITOR-MIB::hpnicfIKEUnsportExchTypeTrapCntl,INTEGER,read-write,,current,enabled(1):disabled(2),Indicates whether hpnicfIKEUnsportExchTypeFailure traps should be generated.
.1.3.6.1.4.1.11.2.14.11.15.2.30.1.5.13,HPN-ICF-IKE-MONITOR-MIB::hpnicfIKEInvalidIdTrapCntl,INTEGER,read-write,,current,enabled(1):disabled(2),Indicates whether hpnicfIKEInvalidIdFailure traps should be generated.
.1.3.6.1.4.1.11.2.14.11.15.2.30.1.5.14,HPN-ICF-IKE-MONITOR-MIB::hpnicfIKEInvalidProtocolTrapCntl,INTEGER,read-write,,current,enabled(1):disabled(2),Indicates whether hpnicfIKEInvalidProtocolFailure traps should be generated.
.1.3.6.1.4.1.11.2.14.11.15.2.30.1.5.15,HPN-ICF-IKE-MONITOR-MIB::hpnicfIKECertTypeUnsuppTrapCntl,INTEGER,read-write,,current,enabled(1):disabled(2),Indicates whether hpnicfIKECertTypeUnsuppFailure traps should be generated.
.1.3.6.1.4.1.11.2.14.11.15.2.30.1.5.16,HPN-ICF-IKE-MONITOR-MIB::hpnicfIKEInvalidCertAuthTrapCntl,INTEGER,read-write,,current,enabled(1):disabled(2),Indicates whether hpnicfIKEInvalidCertAuthFailure traps should be generated.
.1.3.6.1.4.1.11.2.14.11.15.2.30.1.5.17,HPN-ICF-IKE-MONITOR-MIB::hpnicfIKEInvalidSignTrapCntl,INTEGER,read-write,,current,enabled(1):disabled(2),Indicates whether hpnicfIKEInvalidSignFailure traps should be generated.
.1.3.6.1.4.1.11.2.14.11.15.2.30.1.5.18,HPN-ICF-IKE-MONITOR-MIB::hpnicfIKECertUnavailableTrapCntl,INTEGER,read-write,,current,enabled(1):disabled(2),Indicates whether hpnicfIKECertUnavailableFailure traps should be generated.
.1.3.6.1.4.1.11.2.14.11.15.2.30.1.5.19,HPN-ICF-IKE-MONITOR-MIB::hpnicfIKEProposalAddTrapCntl,INTEGER,read-write,,current,enabled(1):disabled(2),Indicates whether hpnicfIKEProposalAdd traps should be generated.
.1.3.6.1.4.1.11.2.14.11.15.2.30.1.5.20,HPN-ICF-IKE-MONITOR-MIB::hpnicfIKEProposalDelTrapCntl,INTEGER,read-write,,current,enabled(1):disabled(2),Indicates whether hpnicfIKEProposalDel traps should be generated.
.1.3.6.1.4.1.11.2.14.11.15.2.30.1.6,HPN-ICF-IKE-MONITOR-MIB::hpnicfIKETrap,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.2.30.1.6.1,HPN-ICF-IKE-MONITOR-MIB::hpnicfIKENotifications,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.2.30.1.6.1.1,HPN-ICF-IKE-MONITOR-MIB::hpnicfIKETunnelStart,,,,,,This notification is generated when an IPsec Phase-1 IKE Tunnel is created.
.1.3.6.1.4.1.11.2.14.11.15.2.30.1.6.1.2,HPN-ICF-IKE-MONITOR-MIB::hpnicfIKETunnelStop,,,,,,This notification is generated when an IPsec Phase-1 IKE Tunnel is deleted.
.1.3.6.1.4.1.11.2.14.11.15.2.30.1.6.1.3,HPN-ICF-IKE-MONITOR-MIB::hpnicfIKENoSaFailure,,,,,,This notification is generated when the IKE tunnel has a non-existent SA error.
.1.3.6.1.4.1.11.2.14.11.15.2.30.1.6.1.4,HPN-ICF-IKE-MONITOR-MIB::hpnicfIKEEncryFailFailure,,,,,,This notification is generated when the IKE tunnel has an encrypting failure.
.1.3.6.1.4.1.11.2.14.11.15.2.30.1.6.1.5,HPN-ICF-IKE-MONITOR-MIB::hpnicfIKEDecryFailFailure,,,,,,This notification is generated when the IKE tunnel has a decrypting failure.
.1.3.6.1.4.1.11.2.14.11.15.2.30.1.6.1.6,HPN-ICF-IKE-MONITOR-MIB::hpnicfIKEInvalidProposalFailure,,,,,,This notification is generated when the IPsec phase-1 invalid proposal occurs.
.1.3.6.1.4.1.11.2.14.11.15.2.30.1.6.1.7,HPN-ICF-IKE-MONITOR-MIB::hpnicfIKEAuthFailFailure,,,,,,This notification is generated when the IPsec phase-1 authentication failure occurs.
.1.3.6.1.4.1.11.2.14.11.15.2.30.1.6.1.8,HPN-ICF-IKE-MONITOR-MIB::hpnicfIKEInvalidCookieFailure,,,,,,This notification is generated when the IPsec phase-1 invalid cookie failure occurs.
.1.3.6.1.4.1.11.2.14.11.15.2.30.1.6.1.9,HPN-ICF-IKE-MONITOR-MIB::hpnicfIKEAttrNotSuppFailure,,,,,,This notification is generated when the IPsec phase-1 unsupported attribute failure occurs.
.1.3.6.1.4.1.11.2.14.11.15.2.30.1.6.1.10,HPN-ICF-IKE-MONITOR-MIB::hpnicfIKEUnsportExchTypeFailure,,,,,,This notification is generated when the IPsec phase-1 unsupported exchange type failure occurs.
.1.3.6.1.4.1.11.2.14.11.15.2.30.1.6.1.11,HPN-ICF-IKE-MONITOR-MIB::hpnicfIKEInvalidIdFailure,,,,,,This notification is generated when the IPsec phase-1 invalid id failure occurs.
.1.3.6.1.4.1.11.2.14.11.15.2.30.1.6.1.12,HPN-ICF-IKE-MONITOR-MIB::hpnicfIKEInvalidProtocolFailure,,,,,,This notification is generated when the processing for an IPsec Phase-1 IKE Tunnel has a protocol related errors.
.1.3.6.1.4.1.11.2.14.11.15.2.30.1.6.1.13,HPN-ICF-IKE-MONITOR-MIB::hpnicfIKECertTypeUnsuppFailure,,,,,,This notification is generated when the IPsec phase-1 unsupported certificate type failure occurs.
.1.3.6.1.4.1.11.2.14.11.15.2.30.1.6.1.14,HPN-ICF-IKE-MONITOR-MIB::hpnicfIKEInvalidCertAuthFailure,,,,,,This notification is generated when the IPsec phase-1 invalid certificate authorization failure occurs.
.1.3.6.1.4.1.11.2.14.11.15.2.30.1.6.1.15,HPN-ICF-IKE-MONITOR-MIB::hpnicfIKElInvalidSignFailure,,,,,,This notification is generated when the IPsec phase-1 invalid signature failure occurs.
.1.3.6.1.4.1.11.2.14.11.15.2.30.1.6.1.16,HPN-ICF-IKE-MONITOR-MIB::hpnicfIKECertUnavailableFailure,,,,,,This notification is generated when the IPsec phase-1 certificate unavailable failure occurs.
.1.3.6.1.4.1.11.2.14.11.15.2.30.1.6.1.17,HPN-ICF-IKE-MONITOR-MIB::hpnicfIKEProposalAdd,,,,,,This notification is generated when an IKE proposal is added.
.1.3.6.1.4.1.11.2.14.11.15.2.30.1.6.1.18,HPN-ICF-IKE-MONITOR-MIB::hpnicfIKEProposalDel,,,,,,This notification is generated when an IKE proposal is deleted.
.1.3.6.1.4.1.11.2.14.11.15.2.30.1.7,HPN-ICF-IKE-MONITOR-MIB::hpnicfIKEScalarObjects,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.2.30.1.7.1,HPN-ICF-IKE-MONITOR-MIB::hpnicfIKEMIBVersion,OCTET,read-only,,current,,Version string of this MIB.
.1.3.6.1.4.1.11.2.14.11.15.2.30.2,HPN-ICF-IKE-MONITOR-MIB::hpnicfIKEConformance,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.2.30.2.1,HPN-ICF-IKE-MONITOR-MIB::hpnicfIKECompliances,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.2.30.2.1.1,HPN-ICF-IKE-MONITOR-MIB::hpnicfIKECompliance,,,,,, 
.1.3.6.1.4.1.11.2.14.11.15.2.30.2.2,HPN-ICF-IKE-MONITOR-MIB::hpnicfIKEGroups,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.2.30.2.2.1,HPN-ICF-IKE-MONITOR-MIB::hpnicfIKETunnelTableGroup,,,,,,The group contains the IKE tunnel's property information.
.1.3.6.1.4.1.11.2.14.11.15.2.30.2.2.2,HPN-ICF-IKE-MONITOR-MIB::hpnicfIKETunnelStatTableGroup,,,,,,The group contains the IKE tunnel's statistic information.
.1.3.6.1.4.1.11.2.14.11.15.2.30.2.2.3,HPN-ICF-IKE-MONITOR-MIB::hpnicfIKEGlobalStatsGroup,,,,,,The group contains all of the IKE tunnel's statistic information.
.1.3.6.1.4.1.11.2.14.11.15.2.30.2.2.4,HPN-ICF-IKE-MONITOR-MIB::hpnicfIKETrapObjectGroup,,,,,,The group contains all of trap objects of IKE tunnels.
.1.3.6.1.4.1.11.2.14.11.15.2.30.2.2.5,HPN-ICF-IKE-MONITOR-MIB::hpnicfIKETrapCntlGroup,,,,,,The group contains all of trap switches of IKE tunnels.
.1.3.6.1.4.1.11.2.14.11.15.2.30.2.2.6,HPN-ICF-IKE-MONITOR-MIB::hpnicfIKETrapGroup,,,,,,The group contains all of trap of IKE tunnels.
.1.3.6.1.4.1.11.2.14.11.15.2.30.2.2.7,HPN-ICF-IKE-MONITOR-MIB::hpnicfIKEScalarObjectsGroup,,,,,,The group contains all of scalar objects of the MIB.
.1.3.6.1.4.1.11.2.14.11.15.2.31,HPN-ICF-OID-MIB::hpnicfWebSwitch,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.2.32,HPN-ICF-OID-MIB::hpnicfAutoDetect,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.2.33,HPN-ICF-OID-MIB::hpnicfIpBroadcast,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.2.33.1,HPN-ICF-IP-BROADCAST-MIB::hpnicfIpBdstScalarGroup,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.2.33.1.1,HPN-ICF-IP-BROADCAST-MIB::hpnicfIpBdstForwardBroadcast,INTEGER,read-write,,current,forwarding(1):notForwarding(2),This object indicates whether a device forwards direct broadcast datagrams or not. More details of this object, please refers to RFC2644. 
.1.3.6.1.4.1.11.2.14.11.15.2.33.1.2,HPN-ICF-IP-BROADCAST-MIB::hpnicfIpReceiveBroadcast,INTEGER,read-write,,current,receive(1):notReceive(2),This objects indicates whether a device receives direct broadcast datagrams or not. More details of this object, please refers to RFC2644. 
.1.3.6.1.4.1.11.2.14.11.15.2.33.2,HPN-ICF-IP-BROADCAST-MIB::hpnicfIpBdstGroup,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.2.33.3,HPN-ICF-IP-BROADCAST-MIB::hpnicfIpBdstTrap,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.2.33.3.0,HPN-ICF-IP-BROADCAST-MIB::hpnicfIpBdstTrapPrex,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.2.34,HPN-ICF-OID-MIB::hpnicfIpx,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.2.34.1,HPN-ICF-IPX-MIB::hpnicfIpxConfig,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.2.34.1.1,HPN-ICF-IPX-MIB::hpnicfIpxStatus,INTEGER,read-write,,current,enabled(1):disabled(2),This object is used to enable or disable ipx globally.
.1.3.6.1.4.1.11.2.14.11.15.2.34.1.2,HPN-ICF-IPX-MIB::hpnicfIpxIfConfigTable,,not-accessible,,current,,Table of configurable management information on each interface.
.1.3.6.1.4.1.11.2.14.11.15.2.34.1.2.1,HPN-ICF-IPX-MIB::hpnicfIpxIfConfigEntry,,not-accessible,hpnicfIpxIfIndex,current,,An entry in the table, containing management information about a single interface.
.1.3.6.1.4.1.11.2.14.11.15.2.34.1.2.1.1,HPN-ICF-IPX-MIB::hpnicfIpxIfIndex,Integer32,not-accessible,,current,,This variable uniquely identifies the interface to which the configurations are applied.
.1.3.6.1.4.1.11.2.14.11.15.2.34.1.2.1.2,HPN-ICF-IPX-MIB::hpnicfIpxIfNetId,OCTET,read-create,,current,,The network number of the IPX address of this interface.
.1.3.6.1.4.1.11.2.14.11.15.2.34.1.2.1.3,HPN-ICF-IPX-MIB::hpnicfIpxIfNodeId,OCTET,read-only,,current,,The node number of the IPX address of this interface.
.1.3.6.1.4.1.11.2.14.11.15.2.34.1.2.1.4,HPN-ICF-IPX-MIB::hpnicfIpxIfSplitHorizon,INTEGER,read-create,,current,enabled(1):disabled(2),This node is used to set the split horizon status. Its default value is 'enabled'. In this case, the interface which receives a message can't send this message from the same interface. This function can avoid route loop. But it is unused for point to point link. If it is set to 'disabled', split horizon is disable.
.1.3.6.1.4.1.11.2.14.11.15.2.34.1.2.1.5,HPN-ICF-IPX-MIB::hpnicfIPxIfTick,Integer32,read-create,,current,,This object is used to set this interface's delay time. It is counted by ticks which is 1/18 second. By default, the ethernet interface's delay time is 1 tick, asynchronous serial interface's delay time is 30 ticks, WAN interface's delay time is 6 ticks.
.1.3.6.1.4.1.11.2.14.11.15.2.34.1.2.1.6,HPN-ICF-IPX-MIB::hpnicfIpxIfUpdateChangeOnly,INTEGER,read-create,,current,enabled(1):disabled(2),When this variable is set to 'enabled', updating change is on. And sap and rip will send updating packets periodically to avoid broadcast storm. Whereas updating change is off.
.1.3.6.1.4.1.11.2.14.11.15.2.34.1.2.1.7,HPN-ICF-IPX-MIB::hpnicfIpxIfRipMtu,Integer32,read-create,,current,,This variable is used to define the max length of RIP updating packets.
.1.3.6.1.4.1.11.2.14.11.15.2.34.1.2.1.8,HPN-ICF-IPX-MIB::hpnicfIpxIfEncapsuleType,INTEGER,read-create,,current,dot2(1):dot3(2):ethernet-2(3):snap(4):unkown(5),This node is used to define the encapsulating form of IPX packets. 'dot2' indicates the form is 802.2, while 'dot3' means 802.3. And 'snap' indicates the form is ethernet-snap. It takes effect only on ethernet interface, and the default value is 'dot3', while 'unkown' for other types of port.
.1.3.6.1.4.1.11.2.14.11.15.2.34.1.2.1.9,HPN-ICF-IPX-MIB::hpnicfIpxIfNetbiosPropagation,INTEGER,read-create,,current,enabled(1):disabled(2),This node is used to configure whether the current interface can forward broadcasting packets which IPX type is 20 used  for NetBIOS.
.1.3.6.1.4.1.11.2.14.11.15.2.34.1.2.1.10,HPN-ICF-IPX-MIB::hpnicfIpxIfSapStatus,INTEGER,read-create,,current,enabled(1):disabled(2),The status of sap on the current interface. It is enabled when ipx is enabled on this interface.
.1.3.6.1.4.1.11.2.14.11.15.2.34.1.2.1.11,HPN-ICF-IPX-MIB::hpnicfIpxIfSapMtu,Integer32,read-create,,current,,This variable is used to define the max length of SAP refreshing packets.
.1.3.6.1.4.1.11.2.14.11.15.2.34.1.2.1.12,HPN-ICF-IPX-MIB::hpnicfIpxIfGnsReply,INTEGER,read-create,,current,enabled(1):disabled(2),This object is used to enable or disable the current interface to response the IPX GNS request.
.1.3.6.1.4.1.11.2.14.11.15.2.34.1.2.1.13,HPN-ICF-IPX-MIB::hpnicfIpxIfRowStatus,INTEGER,read-create,,current,active(1):notInService(2):notReady(3):createAndGo(4):createAndWait(5):destroy(6),The status of this row. To create a row, user can  select 'createAndGo'. If the row is created successfully,  this object will became 'active'. To delete one row,  user can select 'destory' and the row will be deleted.
.1.3.6.1.4.1.11.2.14.11.15.2.34.2,HPN-ICF-IPX-MIB::hpnicfIpxRip,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.2.34.2.1,HPN-ICF-IPX-MIB::hpnicfIpxRouteMultiplier,Integer32,read-write,,current,,This node is used to calculate Rip aging time of route information. The absolute aging time = (hpnicfIpxRouteMultiplier * hpnicfIpxRouteUpdateTimer).
.1.3.6.1.4.1.11.2.14.11.15.2.34.2.2,HPN-ICF-IPX-MIB::hpnicfIpxRouteUpdateTimer,Integer32,read-write,,current,,This node is used to set rip updating time which is based on seconds
.1.3.6.1.4.1.11.2.14.11.15.2.34.2.3,HPN-ICF-IPX-MIB::hpnicfIpxRouteImpRouteStatic,INTEGER,read-write,,current,enabled(1):disabled(2),This object determines whether static route can be imported.
.1.3.6.1.4.1.11.2.14.11.15.2.34.2.4,HPN-ICF-IPX-MIB::hpnicfIpxRouteLoadBalancePaths,Integer32,read-write,,current,,This object defines the max equivalent paths to the same destination. If the newly defined value is smaller than the current value, the routes out of the new value will be set inactive.
.1.3.6.1.4.1.11.2.14.11.15.2.34.2.5,HPN-ICF-IPX-MIB::hpnicfIpxRouteMaxResPaths,Integer32,read-write,,current,,This object defines the max dynamic routes to the same destination. If the newly defined value is smaller than the current value, the routes will not be deleted until they age out or are deleted manually.
.1.3.6.1.4.1.11.2.14.11.15.2.34.2.6,HPN-ICF-IPX-MIB::hpnicfIpxRouteTable,,not-accessible,,current,,This table contains all dynamic and direct ipx route information of this system. The information of this table is read only.
.1.3.6.1.4.1.11.2.14.11.15.2.34.2.6.1,HPN-ICF-IPX-MIB::hpnicfIpxRouteEntry,,not-accessible,hpnicfIpxRouteIndex,current,,Each entry includes a dynamic or direct route.
.1.3.6.1.4.1.11.2.14.11.15.2.34.2.6.1.1,HPN-ICF-IPX-MIB::hpnicfIpxRouteIndex,Integer32,not-accessible,,current,,This object uniquely identifies a route.
.1.3.6.1.4.1.11.2.14.11.15.2.34.2.6.1.2,HPN-ICF-IPX-MIB::hpnicfIpxRouteDestNetId,OCTET,read-only,,current,,The destination network number of this route information, and its value ranges from 1 to 0xfffffffe.
.1.3.6.1.4.1.11.2.14.11.15.2.34.2.6.1.3,HPN-ICF-IPX-MIB::hpnicfIpxRouteNextHop,OCTET,read-only,,current,,The next hop of this route.
.1.3.6.1.4.1.11.2.14.11.15.2.34.2.6.1.4,HPN-ICF-IPX-MIB::hpnicfIpxRoutePro,INTEGER,read-only,,current,direct(1):rip(2),The protocol type of this route information.
.1.3.6.1.4.1.11.2.14.11.15.2.34.2.6.1.5,HPN-ICF-IPX-MIB::hpnicfIpxRoutePre,Integer32,read-only,,current,,The preference of this route information. The direct route's preference is 0, and it can't be modified. Dynamic route's default preference is 100.
.1.3.6.1.4.1.11.2.14.11.15.2.34.2.6.1.6,HPN-ICF-IPX-MIB::hpnicfIpxRouteTicks,Integer32,read-only,,current,,The time, in ticks, that the packet takes to reach the destination.
.1.3.6.1.4.1.11.2.14.11.15.2.34.2.6.1.7,HPN-ICF-IPX-MIB::hpnicfIpxRouteHops,Integer32,read-only,,current,,The object indicates the number of hops that the packet must be  passed through to reach the destination.
.1.3.6.1.4.1.11.2.14.11.15.2.34.2.6.1.8,HPN-ICF-IPX-MIB::hpnicfIpxRouteTime,Integer32,read-only,,current,,The aging time of this route information. The aging time of static and interface route information is 0.
.1.3.6.1.4.1.11.2.14.11.15.2.34.2.6.1.9,HPN-ICF-IPX-MIB::hpnicfIpxRouteOutInterface,OCTET,read-only,,current,,The out interface of this route information.
.1.3.6.1.4.1.11.2.14.11.15.2.34.2.7,HPN-ICF-IPX-MIB::hpnicfIpxStaticRouteTable,,not-accessible,,current,,This table contains all static ipx route information of this system.
.1.3.6.1.4.1.11.2.14.11.15.2.34.2.7.1,HPN-ICF-IPX-MIB::hpnicfIpxStaticRouteEntry,,not-accessible,hpnicfIpxStaticRouteDestNetId:hpnicfIpxStaticRouteNextHop,current,,Each entry includes one static route information.
.1.3.6.1.4.1.11.2.14.11.15.2.34.2.7.1.1,HPN-ICF-IPX-MIB::hpnicfIpxStaticRouteDestNetId,OCTET,not-accessible,,current,,The index of Static Route Table. This object and hpnicfIpxStaticRouteNextHop uniquely identify a static route. The destination network number of this static route information,and its value ranges from 1 to 0xfffffffe. Note that the broadcast network number is 0xffffffff and is not allowed in IPX. The network number of 0xfffffffe would be considered to be the network number of default route.
.1.3.6.1.4.1.11.2.14.11.15.2.34.2.7.1.2,HPN-ICF-IPX-MIB::hpnicfIpxStaticRouteNextHop,OCTET,not-accessible,,current,,The sub-index of Static Route Table. The next hop of this static route information.
.1.3.6.1.4.1.11.2.14.11.15.2.34.2.7.1.3,HPN-ICF-IPX-MIB::hpnicfIpxStaticRoutePre,Integer32,read-create,,current,,The preference of this route information. Static route's preference is 60, and it can be configured.
.1.3.6.1.4.1.11.2.14.11.15.2.34.2.7.1.4,HPN-ICF-IPX-MIB::hpnicfIpxStaticRouteOutIf,OCTET,read-create,,current,,The out interface of this route. This interface can be serial or pos interface. 
.1.3.6.1.4.1.11.2.14.11.15.2.34.2.7.1.5,HPN-ICF-IPX-MIB::hpnicfIpxStaticRouteTicks,Integer32,read-create,,current,,The time, in ticks that the packet takes to reach the destination  with the static route.
.1.3.6.1.4.1.11.2.14.11.15.2.34.2.7.1.6,HPN-ICF-IPX-MIB::hpnicfIpxStaticRouteHops,Integer32,read-create,,current,,This object indicates how many hops are needed to arrive at the destination network.
.1.3.6.1.4.1.11.2.14.11.15.2.34.2.7.1.7,HPN-ICF-IPX-MIB::hpnicfIpxStaticRouteStatus,INTEGER,read-create,,current,active(1):inactive(2),The status of this static route.
.1.3.6.1.4.1.11.2.14.11.15.2.34.2.7.1.8,HPN-ICF-IPX-MIB::hpnicfIpxStaticRouteRowStatus,INTEGER,read-create,,current,active(1):notInService(2):notReady(3):createAndGo(4):createAndWait(5):destroy(6),The status of this row. To create a row, user can  select 'createAndGo'. If the row is created successfully,  this object will became 'active'. To delete one row,  user can select 'destory' and the row will be deleted.
.1.3.6.1.4.1.11.2.14.11.15.2.34.2.8,HPN-ICF-IPX-MIB::hpnicfIpxRouteStatTable,,not-accessible,,current,,A table includes all statistic route information.
.1.3.6.1.4.1.11.2.14.11.15.2.34.2.8.1,HPN-ICF-IPX-MIB::hpnicfIpxRouteStatEntry,,not-accessible,hpnicfIpxRouteStatPro,current,,An entry records a statistic information of route.
.1.3.6.1.4.1.11.2.14.11.15.2.34.2.8.1.1,HPN-ICF-IPX-MIB::hpnicfIpxRouteStatPro,INTEGER,not-accessible,,current,direct(1):static(2):rip(3):default(4):total(5),The protocol type of the route information. The value of 'total' is the total amount of all kinds of IPX routes.
.1.3.6.1.4.1.11.2.14.11.15.2.34.2.8.1.2,HPN-ICF-IPX-MIB::hpnicfIpxRouteStatRoutes,Counter32,read-only,,current,,The route amount of the corresponding protocol type.
.1.3.6.1.4.1.11.2.14.11.15.2.34.2.8.1.3,HPN-ICF-IPX-MIB::hpnicfIpxRouteStatActives,Counter32,read-only,,current,,The active route amount of the corresponding protocol type.
.1.3.6.1.4.1.11.2.14.11.15.2.34.2.8.1.4,HPN-ICF-IPX-MIB::hpnicfIpxRouteStatAddeds,Counter32,read-only,,current,,The added route amount of the corresponding protocol type.
.1.3.6.1.4.1.11.2.14.11.15.2.34.2.8.1.5,HPN-ICF-IPX-MIB::hpnicfIpxRouteStatDeleteds,Counter32,read-only,,current,,The deleted but not freed route amount of the corresponding protocol type.
.1.3.6.1.4.1.11.2.14.11.15.2.34.2.8.1.6,HPN-ICF-IPX-MIB::hpnicfIpxRouteStatFreeds,Counter32,read-only,,current,,The freed route amount of the corresponding protocol type.
.1.3.6.1.4.1.11.2.14.11.15.2.34.3,HPN-ICF-IPX-MIB::hpnicfIpxSap,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.2.34.3.1,HPN-ICF-IPX-MIB::hpnicfIpxSapMultiplier,Integer32,read-write,,current,,This node is used to calculate aging time of service information. The absolute aging time = (hpnicfIpxSapMultiplier * hpnicfIpxSapUpdateTimer).
.1.3.6.1.4.1.11.2.14.11.15.2.34.3.2,HPN-ICF-IPX-MIB::hpnicfIpxSapUpdateTimer,Integer32,read-write,,current,,This node is used to set service packet updating time which is based on seconds.
.1.3.6.1.4.1.11.2.14.11.15.2.34.3.3,HPN-ICF-IPX-MIB::hpnicfIpxSapGnsLoadBalance,INTEGER,read-write,,current,enabled(1):disabled(2),This object is used to set whether the system will reply to the GNS request with the Round-Robin way. By default, the system will response to the GNS request with the servers known to the device in turn, preventing from the nearest server's over loading. With value of disabled, in this way, the system will response to the request with the nearest server(who has smallest hop in system's  service information table).
.1.3.6.1.4.1.11.2.14.11.15.2.34.3.4,HPN-ICF-IPX-MIB::hpnicfIpxSapMaxResServers,Integer32,read-write,,current,,This object is used to configure maximum number of servers of a type. If the newly defined value is smaller than the previous value, the information out of the value will not be deleted. If the queue reaches  to the maximum number, no new information can be added.
.1.3.6.1.4.1.11.2.14.11.15.2.34.3.5,HPN-ICF-IPX-MIB::hpnicfIpxServiceTable,,not-accessible,,current,,This table inlcudes all dynamic service information. The dynamic service information can be read only.
.1.3.6.1.4.1.11.2.14.11.15.2.34.3.5.1,HPN-ICF-IPX-MIB::hpnicfIpxServiceEntry,,not-accessible,hpnicfIpxServiceIndex,current,,One entry records one service
.1.3.6.1.4.1.11.2.14.11.15.2.34.3.5.1.1,HPN-ICF-IPX-MIB::hpnicfIpxServiceIndex,Integer32,not-accessible,,current,,This object uniquely identifies a service information.
.1.3.6.1.4.1.11.2.14.11.15.2.34.3.5.1.2,HPN-ICF-IPX-MIB::hpnicfIpxServiceName,OCTET,read-only,,current,,The name of the service.
.1.3.6.1.4.1.11.2.14.11.15.2.34.3.5.1.3,HPN-ICF-IPX-MIB::hpnicfIpxServiceType,OCTET,read-only,,current,,The service type.
.1.3.6.1.4.1.11.2.14.11.15.2.34.3.5.1.4,HPN-ICF-IPX-MIB::hpnicfIpxServiceNetId,OCTET,read-only,,current,,The IPX network number portion of the IPX address of the service.
.1.3.6.1.4.1.11.2.14.11.15.2.34.3.5.1.5,HPN-ICF-IPX-MIB::hpnicfIpxServiceNodeId,OCTET,read-only,,current,,The IPX node number portion of the IPX address of the service.
.1.3.6.1.4.1.11.2.14.11.15.2.34.3.5.1.6,HPN-ICF-IPX-MIB::hpnicfIpxServiceSocketNo,OCTET,read-only,,current,,The socket portion of the IPX address of the service
.1.3.6.1.4.1.11.2.14.11.15.2.34.3.5.1.7,HPN-ICF-IPX-MIB::hpnicfIpxServicePreference,Integer32,read-only,,current,,The service preference of the service
.1.3.6.1.4.1.11.2.14.11.15.2.34.3.5.1.8,HPN-ICF-IPX-MIB::hpnicfIpxServiceHops,Integer32,read-only,,current,,The hops from the device to the server.
.1.3.6.1.4.1.11.2.14.11.15.2.34.3.5.1.9,HPN-ICF-IPX-MIB::hpnicfIpxServiceRecvIf,OCTET,read-only,,current,,Interface from which the service is receieved
.1.3.6.1.4.1.11.2.14.11.15.2.34.3.6,HPN-ICF-IPX-MIB::hpnicfIpxStaticServiceTable,,not-accessible,,current,,This table inlcudes all static service information. This table supports to creation and deletione of a static service, but not supports to modification
.1.3.6.1.4.1.11.2.14.11.15.2.34.3.6.1,HPN-ICF-IPX-MIB::hpnicfIpxStaticServiceEntry,,not-accessible,hpnicfIpxStaticServiceType:hpnicfIpxStaticServiceName:hpnicfIpxStaticServiceNetId,current,,An entry records one service
.1.3.6.1.4.1.11.2.14.11.15.2.34.3.6.1.1,HPN-ICF-IPX-MIB::hpnicfIpxStaticServiceType,OCTET,not-accessible,,current,,The index of static service table.
.1.3.6.1.4.1.11.2.14.11.15.2.34.3.6.1.2,HPN-ICF-IPX-MIB::hpnicfIpxStaticServiceName,OCTET,not-accessible,,current,,The sub-index of static service table. The name of the service.
.1.3.6.1.4.1.11.2.14.11.15.2.34.3.6.1.3,HPN-ICF-IPX-MIB::hpnicfIpxStaticServiceNetId,OCTET,not-accessible,,current,,The sub-index of static service table. The IPX network number portion of the IPX address of the service.
.1.3.6.1.4.1.11.2.14.11.15.2.34.3.6.1.4,HPN-ICF-IPX-MIB::hpnicfIpxStaticServiceNodeId,OCTET,read-create,,current,,The IPX node number portion of the IPX address of the service.
.1.3.6.1.4.1.11.2.14.11.15.2.34.3.6.1.5,HPN-ICF-IPX-MIB::hpnicfIpxStatciServiceSocketNo,OCTET,read-create,,current,,The socket portion of the IPX address of the service.
.1.3.6.1.4.1.11.2.14.11.15.2.34.3.6.1.6,HPN-ICF-IPX-MIB::hpnicfIpxStaticServicePreference,Integer32,read-create,,current,,The service preference of the server.
.1.3.6.1.4.1.11.2.14.11.15.2.34.3.6.1.7,HPN-ICF-IPX-MIB::hpnicfIpxStaticServiceHops,Integer32,read-create,,current,,The hops from the device to the server.
.1.3.6.1.4.1.11.2.14.11.15.2.34.3.6.1.8,HPN-ICF-IPX-MIB::hpnicfIpxStaticServiceStatus,INTEGER,read-create,,current,active(1):inactive(2),The status of the service that you created. The value of this object is determined by system.
.1.3.6.1.4.1.11.2.14.11.15.2.34.3.6.1.9,HPN-ICF-IPX-MIB::hpnicfIpxStaticServiceRowStatus,INTEGER,read-create,,current,active(1):notInService(2):notReady(3):createAndGo(4):createAndWait(5):destroy(6),The status of this row. To create a row, user can  select 'createAndGo'. If the row is created successfully,  this object will became 'active'. To delete one row,  user can select 'destory' and the row will be deleted.
.1.3.6.1.4.1.11.2.14.11.15.2.34.4,HPN-ICF-IPX-MIB::hpnicfIpxStat,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.2.34.4.1,HPN-ICF-IPX-MIB::hpnicfIpxStatGlobal,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.2.34.4.1.1,HPN-ICF-IPX-MIB::hpnicfIpxStatTotalReceives,Counter32,read-only,,current,,The total number of packets received.
.1.3.6.1.4.1.11.2.14.11.15.2.34.4.1.2,HPN-ICF-IPX-MIB::hpnicfIpxStatPitchs,Counter32,read-only,,current,,The number of received packets filled by device when forwarding  or delivering up to upper protocol.
.1.3.6.1.4.1.11.2.14.11.15.2.34.4.1.3,HPN-ICF-IPX-MIB::hpnicfIpxStatLenErrors,Counter32,read-only,,current,,The number of received packets discarded due to length error.
.1.3.6.1.4.1.11.2.14.11.15.2.34.4.1.4,HPN-ICF-IPX-MIB::hpnicfIpxStatFormatErrors,Counter32,read-only,,current,,The number of received packets discarded due to format error.
.1.3.6.1.4.1.11.2.14.11.15.2.34.4.1.5,HPN-ICF-IPX-MIB::hpnicfIpxStatBadHops,Counter32,read-only,,current,,The number of received packets which's value of field Hops is greater than 16.
.1.3.6.1.4.1.11.2.14.11.15.2.34.4.1.6,HPN-ICF-IPX-MIB::hpnicfIpxStatHopsDiscards,Counter32,read-only,,current,,The number of received packets of which hops portion is equal to 16.
.1.3.6.1.4.1.11.2.14.11.15.2.34.4.1.7,HPN-ICF-IPX-MIB::hpnicfIpxStatOtherErrors,Counter32,read-only,,current,,The number of received packets discarded due to other error.
.1.3.6.1.4.1.11.2.14.11.15.2.34.4.1.8,HPN-ICF-IPX-MIB::hpnicfIpxStatLocalDests,Counter32,read-only,,current,,The number of received packets which destination is the local device. Note that this would include the IPX NetBIOS propagation packets and those broadcast packets just to the network on which local device resides.
.1.3.6.1.4.1.11.2.14.11.15.2.34.4.1.9,HPN-ICF-IPX-MIB::hpnicfIpxStatCantDeals,Counter32,read-only,,current,,The number of received packets with which can't be dealt. One possible reason for discarding such a packet would be receiving a packet of an unknown or unsupported protocol.
.1.3.6.1.4.1.11.2.14.11.15.2.34.4.1.10,HPN-ICF-IPX-MIB::hpnicfIpxStatForwards,Counter32,read-only,,current,,The number of received packets to be forwarded in the case that the entity was not their final destination.
.1.3.6.1.4.1.11.2.14.11.15.2.34.4.1.11,HPN-ICF-IPX-MIB::hpnicfIpxStatGenerates,Counter32,read-only,,current,,The number of sent packets that the device generated itself.
.1.3.6.1.4.1.11.2.14.11.15.2.34.4.1.12,HPN-ICF-IPX-MIB::hpnicfIpxStatNoRoutes,Counter32,read-only,,current,,The number of packets discarded due to no route to the destination was found in routing table.
.1.3.6.1.4.1.11.2.14.11.15.2.34.4.1.13,HPN-ICF-IPX-MIB::hpnicfIpxStatOutDiscards,Counter32,read-only,,current,,The number of packets to be discarded when sending out. Note that this counter would not include the packet(s) discarded due to no route.
.1.3.6.1.4.1.11.2.14.11.15.2.34.4.1.14,HPN-ICF-IPX-MIB::hpnicfIpxStatRipSends,Counter32,read-only,,current,,The total number of RIP packets sent.
.1.3.6.1.4.1.11.2.14.11.15.2.34.4.1.15,HPN-ICF-IPX-MIB::hpnicfIpxStatRipReceives,Counter32,read-only,,current,,The total number of RIP packets received.
.1.3.6.1.4.1.11.2.14.11.15.2.34.4.1.16,HPN-ICF-IPX-MIB::hpnicfIpxStaRipRspSends,Counter32,read-only,,current,,The total number of RIP response packets sent. 
.1.3.6.1.4.1.11.2.14.11.15.2.34.4.1.17,HPN-ICF-IPX-MIB::hpnicfIpxStaRipRspReceives,Counter32,read-only,,current,,The total number of RIP response packets received.
.1.3.6.1.4.1.11.2.14.11.15.2.34.4.1.18,HPN-ICF-IPX-MIB::hpnicfIpxStatRipReqReceives,Counter32,read-only,,current,,The total number of RIP request packets received.
.1.3.6.1.4.1.11.2.14.11.15.2.34.4.1.19,HPN-ICF-IPX-MIB::hpnicfIpxStatRipReqDeals,Counter32,read-only,,current,,The total number of RIP request packets dealt with.
.1.3.6.1.4.1.11.2.14.11.15.2.34.4.1.20,HPN-ICF-IPX-MIB::hpnicfIpxStatRipReqSends,Counter32,read-only,,current,,The total number of RIP request packets sent.
.1.3.6.1.4.1.11.2.14.11.15.2.34.4.1.21,HPN-ICF-IPX-MIB::hpnicfIpxStatRipPeriUpdates,Counter32,read-only,,current,,The total number of periodic update RIP packets sent.
.1.3.6.1.4.1.11.2.14.11.15.2.34.4.1.22,HPN-ICF-IPX-MIB::hpnicfIpxStatSapGenReqReceives,Counter32,read-only,,current,,The total number of SAP general request packets received.
.1.3.6.1.4.1.11.2.14.11.15.2.34.4.1.23,HPN-ICF-IPX-MIB::hpnicfIpxStatSapSpecReqReceives,Counter32,read-only,,current,,The total number of SAP specific request packets received.
.1.3.6.1.4.1.11.2.14.11.15.2.34.4.1.24,HPN-ICF-IPX-MIB::hpnicfIpxStatSapGnsReqReceives,Counter32,read-only,,current,,The total number of SAP GNS request packets received.
.1.3.6.1.4.1.11.2.14.11.15.2.34.4.1.25,HPN-ICF-IPX-MIB::hpnicfIpxStatSapGenRspSends,Counter32,read-only,,current,,The total number of SAP general response packets sent.
.1.3.6.1.4.1.11.2.14.11.15.2.34.4.1.26,HPN-ICF-IPX-MIB::hpnicfIpxStatSapSpecRspSends,Counter32,read-only,,current,,The total number of SAP specific response packets sent.
.1.3.6.1.4.1.11.2.14.11.15.2.34.4.1.27,HPN-ICF-IPX-MIB::hpnicfIpxStatSapGnsRspSends,Counter32,read-only,,current,,The total number of SAP GNS response packets sent.
.1.3.6.1.4.1.11.2.14.11.15.2.34.4.1.28,HPN-ICF-IPX-MIB::hpnicfIpxStatSapPeriUpdates,Counter32,read-only,,current,,The total number of SAP periodic update packets sent.
.1.3.6.1.4.1.11.2.14.11.15.2.34.4.1.29,HPN-ICF-IPX-MIB::hpnicfIpxStatSapInPktErrors,Counter32,read-only,,current,,The total number of SAP error packets received.
.1.3.6.1.4.1.11.2.14.11.15.2.34.4.2,HPN-ICF-IPX-MIB::hpnicfIpxStatInterface,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.2.34.4.2.1,HPN-ICF-IPX-MIB::hpnicfIpxIfStatTable,,not-accessible,,current,,The table of the statistic information on each interface.
.1.3.6.1.4.1.11.2.14.11.15.2.34.4.2.1.1,HPN-ICF-IPX-MIB::hpnicfIpxIfStatEntry,,not-accessible,hpnicfIpxIfStatIndex,current,,The entry of the statistic table.
.1.3.6.1.4.1.11.2.14.11.15.2.34.4.2.1.1.1,HPN-ICF-IPX-MIB::hpnicfIpxIfStatIndex,Integer32,not-accessible,,current,,The index of the table's entry. According to the  interface's index.
.1.3.6.1.4.1.11.2.14.11.15.2.34.4.2.1.1.2,HPN-ICF-IPX-MIB::hpnicfIpxIfStatNetId,OCTET,read-only,,current,,The network number of the IPX address of this interface.
.1.3.6.1.4.1.11.2.14.11.15.2.34.4.2.1.1.3,HPN-ICF-IPX-MIB::hpnicfIpxIfStatNodeId,OCTET,read-only,,current,,The node number of the IPX address of this interface.
.1.3.6.1.4.1.11.2.14.11.15.2.34.4.2.1.1.4,HPN-ICF-IPX-MIB::hpnicfIpxIfStatIpxReceives,Counter32,read-only,,current,,The total number of packets received on the interface.
.1.3.6.1.4.1.11.2.14.11.15.2.34.4.2.1.1.5,HPN-ICF-IPX-MIB::hpnicfIpxIfStatIpxSends,Counter32,read-only,,current,,The total number of packets sent on the interface.
.1.3.6.1.4.1.11.2.14.11.15.2.34.4.2.1.1.6,HPN-ICF-IPX-MIB::hpnicfIpxIfStatIpxRecvBytes,Counter32,read-only,,current,,The total number of bytes received on the interface.
.1.3.6.1.4.1.11.2.14.11.15.2.34.4.2.1.1.7,HPN-ICF-IPX-MIB::hpnicfIpxIfStatIpxSendBytes,Counter32,read-only,,current,,The total number of bytes sent on the interface.
.1.3.6.1.4.1.11.2.14.11.15.2.34.4.2.1.1.8,HPN-ICF-IPX-MIB::hpnicfIpxIfStatRipReceives,Counter32,read-only,,current,,The total number of RIP packets received on the interface.
.1.3.6.1.4.1.11.2.14.11.15.2.34.4.2.1.1.9,HPN-ICF-IPX-MIB::hpnicfIpxIfStatRipSends,Counter32,read-only,,current,,The total number of RIP packets sent on the interface.
.1.3.6.1.4.1.11.2.14.11.15.2.34.4.2.1.1.10,HPN-ICF-IPX-MIB::hpnicfIpxIfStatRipDiscards,Counter32,read-only,,current,,The total number of RIP packets discarded on the interface.
.1.3.6.1.4.1.11.2.14.11.15.2.34.4.2.1.1.11,HPN-ICF-IPX-MIB::hpnicfIpxIfStatRipSpecReqReceives,Counter32,read-only,,current,,The total number of RIP specific request packets received on the interface.
.1.3.6.1.4.1.11.2.14.11.15.2.34.4.2.1.1.12,HPN-ICF-IPX-MIB::hpnicfIpxIfStatRipSpecRspSends,Counter32,read-only,,current,,The total number of RIP specific response packets sent on the interface.
.1.3.6.1.4.1.11.2.14.11.15.2.34.4.2.1.1.13,HPN-ICF-IPX-MIB::hpnicfIpxIfStatRipGenReqReceives,Counter32,read-only,,current,,The total number of RIP general request packets received on the interface.
.1.3.6.1.4.1.11.2.14.11.15.2.34.4.2.1.1.14,HPN-ICF-IPX-MIB::hpnicfIpxIfStatRipGenRspSends,Counter32,read-only,,current,,The total number of RIP general response packets sent on the interface.
.1.3.6.1.4.1.11.2.14.11.15.2.34.4.2.1.1.15,HPN-ICF-IPX-MIB::hpnicfIpxIfStatSapReceives,Counter32,read-only,,current,,The total number of SAP packets received on the interface.
.1.3.6.1.4.1.11.2.14.11.15.2.34.4.2.1.1.16,HPN-ICF-IPX-MIB::hpnicfIpxIfStatSapSends,Counter32,read-only,,current,,The total number of SAP packets sent on the interface.
.1.3.6.1.4.1.11.2.14.11.15.2.34.4.2.1.1.17,HPN-ICF-IPX-MIB::hpnicfIpxIfStatSapDiscards,Counter32,read-only,,current,,The total number of SAP packets discarded on the interface.
.1.3.6.1.4.1.11.2.14.11.15.2.34.4.2.1.1.18,HPN-ICF-IPX-MIB::hpnicfIpxIfStatSapGnsReqReceives,Counter32,read-only,,current,,The total number of SAP GNS response packets received on the interface.
.1.3.6.1.4.1.11.2.14.11.15.2.34.4.2.1.1.19,HPN-ICF-IPX-MIB::hpnicfIpxIfStatSapGnsRspSends,Counter32,read-only,,current,,The total number of SAP GNS response packets sent on the interface.
.1.3.6.1.4.1.11.2.14.11.15.2.35,HPN-ICF-OID-MIB::hpnicfIPS,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.2.36,HPN-ICF-OID-MIB::hpnicfDhcpSnoop,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.2.36.1,HPN-ICF-DHCPSNOOP-MIB::hpnicfDhcpSnoopMibObject,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.2.36.1.1,HPN-ICF-DHCPSNOOP-MIB::hpnicfDhcpSnoopEnable,INTEGER,read-write,,current,enable(1):disable(2),DHCP Snooping status (enable or disable).
.1.3.6.1.4.1.11.2.14.11.15.2.36.1.2,HPN-ICF-DHCPSNOOP-MIB::hpnicfDhcpSnoopTable,,not-accessible,,current,,The table containing information of DHCP clients listened by DHCP snooping and it's enabled or disabled by setting hpnicfDhcpSnoopEnable node.
.1.3.6.1.4.1.11.2.14.11.15.2.36.1.2.1,HPN-ICF-DHCPSNOOP-MIB::hpnicfDhcpSnoopEntry,,not-accessible,hpnicfDhcpSnoopClientIpAddressType:hpnicfDhcpSnoopClientIpAddress,current,,An entry containing information of DHCP clients.
.1.3.6.1.4.1.11.2.14.11.15.2.36.1.2.1.1,HPN-ICF-DHCPSNOOP-MIB::hpnicfDhcpSnoopClientIpAddressType,INTEGER,not-accessible,,current,unknown(0):ipv4(1):ipv6(2):ipv4z(3):ipv6z(4):dns(16),DHCP clients' IP addresses type (IPv4 or IPv6).
.1.3.6.1.4.1.11.2.14.11.15.2.36.1.2.1.2,HPN-ICF-DHCPSNOOP-MIB::hpnicfDhcpSnoopClientIpAddress,OCTET,not-accessible,,current,,DHCP clients' IP addresses collected by DHCP snooping.
.1.3.6.1.4.1.11.2.14.11.15.2.36.1.2.1.3,HPN-ICF-DHCPSNOOP-MIB::hpnicfDhcpSnoopClientMacAddress,OCTET,read-only,,current,,DHCP clients' MAC addresses collected by DHCP snooping.
.1.3.6.1.4.1.11.2.14.11.15.2.36.1.2.1.4,HPN-ICF-DHCPSNOOP-MIB::hpnicfDhcpSnoopClientProperty,INTEGER,read-only,,current,static(1):dynamic(2),Method of getting IP addresses collected by DHCP snooping.
.1.3.6.1.4.1.11.2.14.11.15.2.36.1.2.1.5,HPN-ICF-DHCPSNOOP-MIB::hpnicfDhcpSnoopClientUnitNum,Integer32,read-only,,current,,IRF (Intelligent Resilient Fabric) unit number via whom the clients get their IP addresses. The value 0 means this device does not support IRF.
.1.3.6.1.4.1.11.2.14.11.15.2.36.1.3,HPN-ICF-DHCPSNOOP-MIB::hpnicfDhcpSnoopTrustTable,,not-accessible,,current,,A table is used to configure and monitor port trusted status.
.1.3.6.1.4.1.11.2.14.11.15.2.36.1.3.1,HPN-ICF-DHCPSNOOP-MIB::hpnicfDhcpSnoopTrustEntry,,not-accessible,ifIndex,current,,An entry containing information about trusted status of ports.
.1.3.6.1.4.1.11.2.14.11.15.2.36.1.3.1.1,HPN-ICF-DHCPSNOOP-MIB::hpnicfDhcpSnoopTrustStatus,INTEGER,read-write,,current,untrusted(0):trusted(1),Trusted status of current port which supports both get and set operation.
.1.3.6.1.4.1.11.2.14.11.15.2.36.1.4,HPN-ICF-DHCPSNOOP-MIB::hpnicfDhcpSnoopVlanTable,,not-accessible,,current,,A table is used to configure and monitor DHCP Snooping status of VLANs.
.1.3.6.1.4.1.11.2.14.11.15.2.36.1.4.1,HPN-ICF-DHCPSNOOP-MIB::hpnicfDhcpSnoopVlanEntry,,not-accessible,hpnicfDhcpSnoopVlanIndex,current,,The entry information about hpnicfDhcpSnoopVlanTable.
.1.3.6.1.4.1.11.2.14.11.15.2.36.1.4.1.1,HPN-ICF-DHCPSNOOP-MIB::hpnicfDhcpSnoopVlanIndex,Integer32,not-accessible,,current,,Current VLAN index.
.1.3.6.1.4.1.11.2.14.11.15.2.36.1.4.1.2,HPN-ICF-DHCPSNOOP-MIB::hpnicfDhcpSnoopVlanEnable,INTEGER,read-write,,current,true(1):false(2),DHCP Snooping status of current VLAN.
.1.3.6.1.4.1.11.2.14.11.15.2.36.2,HPN-ICF-DHCPSNOOP-MIB::hpnicfDhcpSnoopTraps,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.2.36.2.0,HPN-ICF-DHCPSNOOP-MIB::hpnicfDhcpSnoopTrapsPrefix,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.2.36.2.0.1,HPN-ICF-DHCPSNOOP-MIB::hpnicfDhcpSnoopSpoofServerDetected,,,,,,To detect unauthorized DHCP servers on a network, the DHCP snooping device sends DHCP-DISCOVER messages through its downstream port (which is connected to the DHCP clients). If any response (DHCP-OFFER message) is received from the downstream port, an unauthorized DHCP server is considered present, and then the device sends a trap. With unauthorized DHCP server detection enabled, the interface sends a DHCP-DISCOVER message to detect unauthorized DHCP servers on the network. If this interface receives a DHCP-OFFER message, the DHCP server which sent it is considered unauthorized. 
.1.3.6.1.4.1.11.2.14.11.15.2.36.2.0.2,HPN-ICF-DHCPSNOOP-MIB::hpnicfDhcpSnoopNewBinding,,,,,,The device sends a trap when adding a new binding.
.1.3.6.1.4.1.11.2.14.11.15.2.36.2.1,HPN-ICF-DHCPSNOOP-MIB::hpnicfDhcpSnoopTrapsObject,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.2.36.2.1.1,HPN-ICF-DHCPSNOOP-MIB::hpnicfDhcpSnoopSpoofServerMac,OCTET,accessible-for-notify,,current,,MAC address of the spoofing server and it is derived from link-layer header of offer packet. If the offer packet is relayed by dhcp relay entity, it may be the MAC address of relay entity. 
.1.3.6.1.4.1.11.2.14.11.15.2.36.2.1.2,HPN-ICF-DHCPSNOOP-MIB::hpnicfDhcpSnoopSpoofServerIP,IpAddress,accessible-for-notify,,current,,IP address of the spoofing server and it is derived from IP header of offer packet. A tricksy host may send offer packet use other host's address, so this address can not always be trust. 
.1.3.6.1.4.1.11.2.14.11.15.2.36.2.1.3,HPN-ICF-DHCPSNOOP-MIB::hpnicfDhcpSnoopBindingIP,IpAddress,accessible-for-notify,,current,,IP address of a new binding. 
.1.3.6.1.4.1.11.2.14.11.15.2.36.2.1.4,HPN-ICF-DHCPSNOOP-MIB::hpnicfDhcpSnoopBindingMac,OCTET,accessible-for-notify,,current,,MAC address of a new binding. 
.1.3.6.1.4.1.11.2.14.11.15.2.37,HPN-ICF-OID-MIB::hpnicfProtocolPriority,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.2.37.1,HPN-ICF-PROT-PRIORITY-MIB::hpnicfProtocolPriorityObjects,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.2.37.1.1,HPN-ICF-PROT-PRIORITY-MIB::hpnicfPPri,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.2.37.1.1.1,HPN-ICF-PROT-PRIORITY-MIB::hpnicfProtocolPriorityTable,,not-accessible,,current,,A table is used to configure the priority of the protocol.
.1.3.6.1.4.1.11.2.14.11.15.2.37.1.1.1.1,HPN-ICF-PROT-PRIORITY-MIB::hpnicfProtocolPriorityEntry,,not-accessible,hpnicfPPriProtocolType,current,,An entry containing information about the priority of the protocol.
.1.3.6.1.4.1.11.2.14.11.15.2.37.1.1.1.1.1,HPN-ICF-PROT-PRIORITY-MIB::hpnicfPPriProtocolType,INTEGER,not-accessible,,current,ospf(1):telnet(2):snmp(3):icmp(4):bgp(5):ldp(6),Protocol type.
.1.3.6.1.4.1.11.2.14.11.15.2.37.1.1.1.1.2,HPN-ICF-PROT-PRIORITY-MIB::hpnicfPPriPriorityType,INTEGER,read-create,,current,ipPrecedence(1):dscp(2),Priority type.
.1.3.6.1.4.1.11.2.14.11.15.2.37.1.1.1.1.3,HPN-ICF-PROT-PRIORITY-MIB::hpnicfPPriPriorityVlaue,Integer32,read-create,,current,,Priority value. If setting hpnicfPPriPriorityType to ip-precedence(1), the range of hpnicfPPriPriorityVlaue is from 0 to 7. If setting hpnicfPPriPriorityType to dscp(2), the range of hpnicfPPriPriorityVlaue is from 0 to 63.
.1.3.6.1.4.1.11.2.14.11.15.2.37.1.1.1.1.4,HPN-ICF-PROT-PRIORITY-MIB::hpnicfPPriRowStatus,INTEGER,read-create,,current,active(1):notInService(2):notReady(3):createAndGo(4):createAndWait(5):destroy(6),RowStatus, Now support createAndGo,active and destroy. To create a new row, hpnicfPPriPriorityType and hpnicfPPriPriorityValue must be specified. To modify a row,hpnicfPPriPriorityType and hpnicfPPriPriorityValue must change at the same time and the hpnicfPPriRowStatus is active .
.1.3.6.1.4.1.11.2.14.11.15.2.38,HPN-ICF-OID-MIB::hpnicfTrap,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.2.38.1,HPN-ICF-TRAP-MIB::hpnicfTableGroup,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.2.38.1.1,HPN-ICF-TRAP-MIB::hpnicfMacTabStatGroup,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.2.38.1.1.1,HPN-ICF-TRAP-MIB::hpnicfMacTabTrapEnable,INTEGER,read-write,,current,enable(1):disable(2),Indicates whether hpnicfMacTabFullTrap and hpnicfMacTabAlmostFullTrap traps should be generated when the MAC table is filled.
.1.3.6.1.4.1.11.2.14.11.15.2.38.1.1.2,HPN-ICF-TRAP-MIB::hpnicfMacTabTrapInterval,Integer32,read-write,,current,,Definition of the minimum interval between two traps which occur when the MAC table is full or two traps which occur when the MAC table is almost full.
.1.3.6.1.4.1.11.2.14.11.15.2.38.1.1.3,HPN-ICF-TRAP-MIB::hpnicfMacTabTrapInfo,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.2.38.1.1.3.1,HPN-ICF-TRAP-MIB::hpnicfMacTabLen,Integer32,accessible-for-notify,,current,,The length of the MAC table.
.1.3.6.1.4.1.11.2.14.11.15.2.38.1.1.4,HPN-ICF-TRAP-MIB::hpnicfMacTabTrap,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.2.38.1.1.4.1,HPN-ICF-TRAP-MIB::hpnicfMacTabFullTrap,,,,,,Send this trap when the MAC table is filled. The interval between two traps generated should be longer than hpnicfMacTabTrapInterval.
.1.3.6.1.4.1.11.2.14.11.15.2.38.1.1.4.2,HPN-ICF-TRAP-MIB::hpnicfMacTabAlmostFullTrap,,,,,,Send this trap when the MAC table is almost full. The interval between two traps generated should be longer than hpnicfMacTabTrapInterval.
.1.3.6.1.4.1.11.2.14.11.15.2.38.1.2,HPN-ICF-TRAP-MIB::hpnicfArpTabStatGroup,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.2.38.1.2.1,HPN-ICF-TRAP-MIB::hpnicfArpTabTrapEnable,INTEGER,read-write,,current,enable(1):disable(2),Indicates whether hpnicfArpTabFullTrap traps should be generated when the ARP table is filled.
.1.3.6.1.4.1.11.2.14.11.15.2.38.1.2.2,HPN-ICF-TRAP-MIB::hpnicfArpTabTrapInterval,Integer32,read-write,,current,,Definition of the minimum interval between two traps which occur when the ARP table is filled.
.1.3.6.1.4.1.11.2.14.11.15.2.38.1.2.3,HPN-ICF-TRAP-MIB::hpnicfArpTabTrapInfo,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.2.38.1.2.3.1,HPN-ICF-TRAP-MIB::hpnicfArpTabLen,Integer32,accessible-for-notify,,current,,The length of the ARP table.
.1.3.6.1.4.1.11.2.14.11.15.2.38.1.2.4,HPN-ICF-TRAP-MIB::hpnicfArpTabTrap,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.2.38.1.2.4.1,HPN-ICF-TRAP-MIB::hpnicfArpTabFullTrap,,,,,,Send this trap when the ARP table is filled. The interval between two traps generated should be longer than hpnicfArpTabTrapInterval.
.1.3.6.1.4.1.11.2.14.11.15.2.38.1.2.4.2,HPN-ICF-TRAP-MIB::hpnicfArpPortDynamicEntryFullTrap,,,,,,Send this trap when the dynamic ARP number of the port exceeds the limitation. The object hpnicfArpTabLen describes the limitation of the max dynamic ARP number of this port. The interval between two traps should be longer than hpnicfArpTabTrapInterval.
.1.3.6.1.4.1.11.2.14.11.15.2.38.1.3,HPN-ICF-TRAP-MIB::hpnicfRtTabStatGroup,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.2.38.1.3.1,HPN-ICF-TRAP-MIB::hpnicfDetailRtTrapTable,,not-accessible,,current,,This table contains objects to decide what kind of trap should be sent.
.1.3.6.1.4.1.11.2.14.11.15.2.38.1.3.1.1,HPN-ICF-TRAP-MIB::hpnicfDetailRtTrapEntry,,not-accessible,hpnicfDetailRtProType,current,,Entry items
.1.3.6.1.4.1.11.2.14.11.15.2.38.1.3.1.1.1,HPN-ICF-TRAP-MIB::hpnicfDetailRtProType,INTEGER,accessible-for-notify,,current,other(1):local(2):rip(3):isis(4):ospf(5):bgp(6),The index value which uniquely identifies an entry in the hpnicfDetailRtTrapTable.
.1.3.6.1.4.1.11.2.14.11.15.2.38.1.3.1.1.2,HPN-ICF-TRAP-MIB::hpnicfDetailRtEnable,INTEGER,read-write,,current,enable(1):disable(2),Indicates whether hpnicfDetailRtTabFullTrap traps should be generated when a specific routing table is filled.
.1.3.6.1.4.1.11.2.14.11.15.2.38.1.3.2,HPN-ICF-TRAP-MIB::hpnicfRtTabTrapEnable,INTEGER,read-write,,current,enable(1):disable(2),Indicates whether hpnicfRtTabFullTrap traps should be generated when the routing table is filled.
.1.3.6.1.4.1.11.2.14.11.15.2.38.1.3.3,HPN-ICF-TRAP-MIB::hpnicfRtTabTrapInterval,Integer32,read-write,,current,,Definition of the minimum interval between two traps which occur when the routing table is filled.
.1.3.6.1.4.1.11.2.14.11.15.2.38.1.3.4,HPN-ICF-TRAP-MIB::hpnicfRtTabTrapInfo,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.2.38.1.3.4.1,HPN-ICF-TRAP-MIB::hpnicfRtTabLen,Integer32,accessible-for-notify,,current,,The length of the routing table. The detail routing tables also use the same object.
.1.3.6.1.4.1.11.2.14.11.15.2.38.1.3.4.2,HPN-ICF-TRAP-MIB::hpnicfDefaultRtNextHopType,INTEGER,accessible-for-notify,,current,unknown(0):ipv4(1):ipv6(2):ipv4z(3):ipv6z(4):dns(16),The IP address type of the next hop of the default route. The value must be ipv4 or ipv6
.1.3.6.1.4.1.11.2.14.11.15.2.38.1.3.4.3,HPN-ICF-TRAP-MIB::hpnicfDefaultRtNextHop,OCTET,accessible-for-notify,,current,,The IP address of the next hop of the default route.
.1.3.6.1.4.1.11.2.14.11.15.2.38.1.3.4.4,HPN-ICF-TRAP-MIB::hpnicfDefaultRtOutIf,Integer32,accessible-for-notify,,current,,The index value which uniquely identifies the local interface through which the next hop of this route should be reached. The interface identified by a particular value of this index is the same interface as identified by the same value of ifIndex.
.1.3.6.1.4.1.11.2.14.11.15.2.38.1.3.5,HPN-ICF-TRAP-MIB::hpnicfRtTabTrap,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.2.38.1.3.5.1,HPN-ICF-TRAP-MIB::hpnicfRtTabFullTrap,,,,,,Send this trap when the routing table is filled. The interval between two traps generated should be longer than hpnicfRtTabTrapInterval.
.1.3.6.1.4.1.11.2.14.11.15.2.38.1.3.5.2,HPN-ICF-TRAP-MIB::hpnicfDetailRtTabFullTrap,,,,,,Send this trap when the detail routing table is filled. The interval between two traps generated should be longer than hpnicfRtTabTrapInterval.
.1.3.6.1.4.1.11.2.14.11.15.2.38.1.3.5.3,HPN-ICF-TRAP-MIB::hpnicfDefaultRtDelTrap,,,,,,Send this trap when the default route is deleted.
.1.3.6.1.4.1.11.2.14.11.15.2.38.1.3.6,HPN-ICF-TRAP-MIB::hpnicfDefaultRtDelTrapEnable,INTEGER,read-write,,current,true(1):false(2),Indicates whether hpnicfDefaultRtDelTrap traps should be generated when the default route is deleted.
.1.3.6.1.4.1.11.2.14.11.15.2.38.1.4,HPN-ICF-TRAP-MIB::hpnicfMulticastTabStatGroup,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.2.38.1.4.1,HPN-ICF-TRAP-MIB::hpnicfMulticastTabTrapEnable,INTEGER,read-write,,current,enable(1):disable(2),Indicates whether hpnicfMulticastTabFullTrap traps should be generated when the multicast table is filled.
.1.3.6.1.4.1.11.2.14.11.15.2.38.1.4.2,HPN-ICF-TRAP-MIB::hpnicfMulticastTabTrapInterval,Integer32,read-write,,current,,Definition of the minimum interval between two traps which occur when the multicast table is filled.
.1.3.6.1.4.1.11.2.14.11.15.2.38.1.4.3,HPN-ICF-TRAP-MIB::hpnicfMulticastTabTrapInfo,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.2.38.1.4.3.1,HPN-ICF-TRAP-MIB::hpnicfMulticastTabType,INTEGER,accessible-for-notify,,current,lay2(1):lay3(2),Defining the type of the multicast table, layer2 or layer3.
.1.3.6.1.4.1.11.2.14.11.15.2.38.1.4.3.2,HPN-ICF-TRAP-MIB::hpnicfMulticastTabLen,Integer32,accessible-for-notify,,current,,The length of the multicast table.
.1.3.6.1.4.1.11.2.14.11.15.2.38.1.4.4,HPN-ICF-TRAP-MIB::hpnicfMulticastTabTrap,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.2.38.1.4.4.1,HPN-ICF-TRAP-MIB::hpnicfMulticastTabFullTrap,,,,,,Send this trap when the multicast table is filled. The interval between two traps generated should be longer than hpnicfMulticastTabTrapInterval.
.1.3.6.1.4.1.11.2.14.11.15.2.38.1.5,HPN-ICF-TRAP-MIB::hpnicfNdTabStatGroup,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.2.38.1.5.1,HPN-ICF-TRAP-MIB::hpnicfNdTabTrapEnable,INTEGER,read-write,,current,enable(1):disable(2),Indicates whether hpnicfNdTabFullTrap traps should be generated when the ND table is filled.
.1.3.6.1.4.1.11.2.14.11.15.2.38.1.5.2,HPN-ICF-TRAP-MIB::hpnicfNdTabTrapInterval,Integer32,read-write,,current,,Definition of the minimum interval between two traps which occur when the ND table is filled.
.1.3.6.1.4.1.11.2.14.11.15.2.38.1.5.3,HPN-ICF-TRAP-MIB::hpnicfNdTabTrapInfo,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.2.38.1.5.3.1,HPN-ICF-TRAP-MIB::hpnicfNdTabLen,Integer32,accessible-for-notify,,current,,The length of the ND table.
.1.3.6.1.4.1.11.2.14.11.15.2.38.1.5.4,HPN-ICF-TRAP-MIB::hpnicfNdTabTrap,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.2.38.1.5.4.1,HPN-ICF-TRAP-MIB::hpnicfNdTabFullTrap,,,,,,Send this trap when the ND table is filled. The interval between two traps generated should be longer than hpnicfNdTabTrapInterval.
.1.3.6.1.4.1.11.2.14.11.15.2.38.1.6,HPN-ICF-TRAP-MIB::hpnicfPeriodicalTrapGroup,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.2.38.1.6.1,HPN-ICF-TRAP-MIB::hpnicfPeriodicalTrapObjects,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.2.38.1.6.1.1,HPN-ICF-TRAP-MIB::hpnicfPeriodicalTrapInterval,Integer32,read-write,,current,,Definition of the periodical interval. If no trap occurs during the certain interval, an hpnicfPeriodicalTrap will be generated. If the interval is set to 0, no hpnicfPeriodicalTrap will be generated.
.1.3.6.1.4.1.11.2.14.11.15.2.38.1.6.1.2,HPN-ICF-TRAP-MIB::hpnicfPeriodicalTrapSwitch,INTEGER,read-write,,current,enable(1):disable(2),Definition of the periodical switch. If the value is off,the hpnicfPeriodicalTrap will not be generated. the hpnicfPeriodicalTrapInterval will be set to 0.
.1.3.6.1.4.1.11.2.14.11.15.2.38.1.6.1.3,HPN-ICF-TRAP-MIB::hpnicfPeriodicalTrapSwitch2,INTEGER,read-write,,current,off(0):on(1),Periodical heartbeat trap sending switch. If the value is off, the hpnicfPeriodicalTrap will not be generated, and the hpnicfPeriodicalTrapInterval will be set to 0. This node differs from hpnicfPeriodicalTrapSwitch in value.
.1.3.6.1.4.1.11.2.14.11.15.2.38.1.6.2,HPN-ICF-TRAP-MIB::hpnicfPeriodicalTrapInfo,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.2.38.1.6.3,HPN-ICF-TRAP-MIB::hpnicfPeriodicalNotification,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.2.38.1.6.3.0,HPN-ICF-TRAP-MIB::hpnicfPeriodicalNotificationPrefix,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.2.38.1.6.3.0.1,HPN-ICF-TRAP-MIB::hpnicfPeriodicalTrap,,,,,,If no trap occurs during the interval spicified by hpnicfPeriodicalTrapInterval, an hpnicfPeriodicalTrap will be generated. If the interval is set to 0, no hpnicfPeriodicalTrap will be generated.
.1.3.6.1.4.1.11.2.14.11.15.2.38.1.7,HPN-ICF-TRAP-MIB::hpnicfTrapDesInfo,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.2.38.1.7.1,HPN-ICF-TRAP-MIB::hpnicfTrapDesInfoTable,,not-accessible,,current,,A table of trap destination host address and port .
.1.3.6.1.4.1.11.2.14.11.15.2.38.1.7.1.1,HPN-ICF-TRAP-MIB::hpnicfTrapDesInfoEntry,,not-accessible,hpnicfTrapDesInfoIndex,current,,The entry of trap destination host address and port.
.1.3.6.1.4.1.11.2.14.11.15.2.38.1.7.1.1.1,HPN-ICF-TRAP-MIB::hpnicfTrapDesInfoIndex,Integer32,not-accessible,,current,,The index of this table.
.1.3.6.1.4.1.11.2.14.11.15.2.38.1.7.1.1.2,HPN-ICF-TRAP-MIB::hpnicfTrapDesIPAddress,IpAddress,read-create,,current,,The host IP address of the trap destination.
.1.3.6.1.4.1.11.2.14.11.15.2.38.1.7.1.1.3,HPN-ICF-TRAP-MIB::hpnicfTrapDesPort,Integer32,read-create,,current,,The port of the trap destination.
.1.3.6.1.4.1.11.2.14.11.15.2.38.1.7.1.1.4,HPN-ICF-TRAP-MIB::hpnicfTrapDesRowStatus,INTEGER,read-create,,current,active(1):notInService(2):notReady(3):createAndGo(4):createAndWait(5):destroy(6),The status of this table entry.
.1.3.6.1.4.1.11.2.14.11.15.2.38.1.7.1.1.5,HPN-ICF-TRAP-MIB::hpnicfTrapDesAddrTAddress,OCTET,read-create,,current,,This object contains a transport address.
.1.3.6.1.4.1.11.2.14.11.15.2.38.1.8,HPN-ICF-TRAP-MIB::hpnicfTrapConfig,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.2.38.1.8.1,HPN-ICF-TRAP-MIB::hpnicfTrapConfigTable,,not-accessible,,current,,A table of trap configuration.
.1.3.6.1.4.1.11.2.14.11.15.2.38.1.8.1.1,HPN-ICF-TRAP-MIB::hpnicfTrapConfigEntry,,not-accessible,hpnicfTrapConfigIndex,current,,The entry of trap configuration.
.1.3.6.1.4.1.11.2.14.11.15.2.38.1.8.1.1.1,HPN-ICF-TRAP-MIB::hpnicfTrapConfigIndex,Integer32,not-accessible,,current,,The index of this table.
.1.3.6.1.4.1.11.2.14.11.15.2.38.1.8.1.1.2,HPN-ICF-TRAP-MIB::hpnicfTrapConfigName,OCTET,read-only,,current,,The name of the appointed traps.
.1.3.6.1.4.1.11.2.14.11.15.2.38.1.8.1.1.3,HPN-ICF-TRAP-MIB::hpnicfTrapConfigDescr,OCTET,read-write,,current,,The description of the appointed traps.
.1.3.6.1.4.1.11.2.14.11.15.2.38.1.8.1.1.4,HPN-ICF-TRAP-MIB::hpnicfTrapConfigSwitch,INTEGER,read-write,,current,enable(1):disable(2),Indicates whether the specified traps should be generated.
.1.3.6.1.4.1.11.2.14.11.15.2.38.1.8.1.1.5,HPN-ICF-TRAP-MIB::hpnicfTrapConfigSwitch2,INTEGER,read-write,,current,off(0):on(1),Indicates whether the specified traps should be generated. This node differs from hpnicfTrapConfigSwitch in value.
.1.3.6.1.4.1.11.2.14.11.15.2.39,HPN-ICF-OID-MIB::hpnicfVoice,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.2.39.13,HPN-ICF-VOICE-IF-MIB::hpnicfVoiceInterface,,,,,,This MIB file is to provide the definition of the voice interface general configuration.
.1.3.6.1.4.1.11.2.14.11.15.2.39.13.1,HPN-ICF-VOICE-IF-MIB::hpnicfVoiceIfObjects,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.2.39.13.1.1,HPN-ICF-VOICE-IF-MIB::hpnicfVoiceIfConfigTable,,not-accessible,,current,,The table contains configurable parameters for both analog voice interface and digital voice interface.
.1.3.6.1.4.1.11.2.14.11.15.2.39.13.1.1.1,HPN-ICF-VOICE-IF-MIB::hpnicfVoiceIfConfigEntry,,not-accessible,ifIndex,current,,The entry of voice interface table.
.1.3.6.1.4.1.11.2.14.11.15.2.39.13.1.1.1.1,HPN-ICF-VOICE-IF-MIB::hpnicfVoiceIfCfgCngOn,INTEGER,read-write,,current,enable(1):disable(2),This object indicates whether the silence gaps should be filled with background noise. It is applicable to FXO, FXS, E&M subscriber lines and E1/T1 voice subscriber line.
.1.3.6.1.4.1.11.2.14.11.15.2.39.13.1.1.1.2,HPN-ICF-VOICE-IF-MIB::hpnicfVoiceIfCfgNonLinearSwitch,INTEGER,read-write,,current,enable(1):disable(2),This object expresses the nonlinear processing is enable or disable for the voice interface. It is applicable to FXO, FXS, E&M subscriber lines and E1/T1 voice subscriber line. Currently, only digital voice subscriber lines can be set disabled.
.1.3.6.1.4.1.11.2.14.11.15.2.39.13.1.1.1.3,HPN-ICF-VOICE-IF-MIB::hpnicfVoiceIfCfgInputGain,Integer32,read-write,,current,,This object indicates the amount of gain added to the receiver side of the voice interface. Unit is 0.1 db. It is applicable to FXO, FXS, E&M subscriber lines and E1/T1 voice subscriber line.
.1.3.6.1.4.1.11.2.14.11.15.2.39.13.1.1.1.4,HPN-ICF-VOICE-IF-MIB::hpnicfVoiceIfCfgOutputGain,Integer32,read-write,,current,,This object indicates the amount of gain added to the send side of the voice interface. Unit is 0.1 db. It is applicable to FXO, FXS, E&M subscriber lines and E1/T1 voice subscriber line.
.1.3.6.1.4.1.11.2.14.11.15.2.39.13.1.1.1.5,HPN-ICF-VOICE-IF-MIB::hpnicfVoiceIfCfgEchoCancelSwitch,INTEGER,read-write,,current,enable(1):disable(2),This object indicates whether the echo cancellation is enabled. It is applicable to FXO, FXS, E&M subscriber lines and E1/T1 voice subscriber line.
.1.3.6.1.4.1.11.2.14.11.15.2.39.13.1.1.1.6,HPN-ICF-VOICE-IF-MIB::hpnicfVoiceIfCfgEchoCancelDelay,Integer32,read-write,,current,,This object indicates the delay of the echo cancellation for the voice interface. This value couldn't be modified unless hpnicfVoiceIfCfgEchoCancelSwitch is enable. Unit is milliseconds. It is applicable to FXO, FXS, E&M subscriber lines and E1/T1 voice subscriber line. The default value of this object is 32.
.1.3.6.1.4.1.11.2.14.11.15.2.39.13.1.1.1.7,HPN-ICF-VOICE-IF-MIB::hpnicfVoiceIfCfgTimerDialInterval,Integer32,read-write,,current,,The interval, in seconds, between two dialing numbers. The default value of this object is 10 seconds. It is applicable to FXO, FXS, E&M subscriber lines and E1/T1 with loop-start or ground-start protocol voice subscriber line.
.1.3.6.1.4.1.11.2.14.11.15.2.39.13.1.1.1.8,HPN-ICF-VOICE-IF-MIB::hpnicfVoiceIfCfgTimerFirstDial,Integer32,read-write,,current,,The period of time, in seconds, before dialing the first number. The default value of this object is 10 seconds. It is applicable to FXO, FXS subscriber lines and E1/T1 with loop-start or ground-start protocol voice subscriber line.
.1.3.6.1.4.1.11.2.14.11.15.2.39.13.1.1.1.9,HPN-ICF-VOICE-IF-MIB::hpnicfVoiceIfCfgPrivateline,OCTET,read-write,,current,,This object indicates the E.164 phone number for plar mode. It is applicable to FXO, FXS, E&M subscriber lines and E1/T1 voice subscriber line.
.1.3.6.1.4.1.11.2.14.11.15.2.39.13.1.1.1.10,HPN-ICF-VOICE-IF-MIB::hpnicfVoiceIfCfgRegTone,OCTET,read-write,,current,,This object uses 2 or 3 letter country code specify voice parameters of different countrys. This value will take effect on all voice interfaces of all cards on the device.
.1.3.6.1.4.1.11.2.14.11.15.2.39.14,HPN-ICF-VOICE-DIAL-CONTROL-MIB::hpnicfVoiceEntityControl,,,,,,This MIB file is to provide the definition of voice dial control configuration.
.1.3.6.1.4.1.11.2.14.11.15.2.39.14.1,HPN-ICF-VOICE-DIAL-CONTROL-MIB::hpnicfVoEntityObjects,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.2.39.14.1.1,HPN-ICF-VOICE-DIAL-CONTROL-MIB::hpnicfVoEntityCreateTable,,not-accessible,,current,,The table contains the voice entity information that is used to create an ifIndexed row.
.1.3.6.1.4.1.11.2.14.11.15.2.39.14.1.1.1,HPN-ICF-VOICE-DIAL-CONTROL-MIB::hpnicfVoEntityCreateEntry,,not-accessible,hpnicfVoEntityIndex,current,,The entry of hpnicfVoEntityCreateTable.
.1.3.6.1.4.1.11.2.14.11.15.2.39.14.1.1.1.1,HPN-ICF-VOICE-DIAL-CONTROL-MIB::hpnicfVoEntityIndex,Integer32,not-accessible,,current,,An arbitrary index that uniquely identifies a voice entity.
.1.3.6.1.4.1.11.2.14.11.15.2.39.14.1.1.1.2,HPN-ICF-VOICE-DIAL-CONTROL-MIB::hpnicfVoEntityType,INTEGER,read-create,,current,pots(1):voip(2):vofr(3),Specify the type of voice related encapsulation.
.1.3.6.1.4.1.11.2.14.11.15.2.39.14.1.1.1.3,HPN-ICF-VOICE-DIAL-CONTROL-MIB::hpnicfVoEntityRowStatus,INTEGER,read-create,,current,active(1):notInService(2):notReady(3):createAndGo(4):createAndWait(5):destroy(6), This object is used to create, delete or modify a row in this table. The hpnicfVoEntityType object should not be modified once the new row has been created.
.1.3.6.1.4.1.11.2.14.11.15.2.39.14.1.2,HPN-ICF-VOICE-DIAL-CONTROL-MIB::hpnicfVoEntityCommonConfigTable,,not-accessible,,current,,This table contains the general voice entity information.
.1.3.6.1.4.1.11.2.14.11.15.2.39.14.1.2.1,HPN-ICF-VOICE-DIAL-CONTROL-MIB::hpnicfVoEntityCommonConfigEntry,,not-accessible,hpnicfVoEntityCfgIndex,current,,The entry of hpnicfVoEntityCommonConfigTable.
.1.3.6.1.4.1.11.2.14.11.15.2.39.14.1.2.1.1,HPN-ICF-VOICE-DIAL-CONTROL-MIB::hpnicfVoEntityCfgIndex,Integer32,not-accessible,,current,,An arbitrary index that uniquely identifies a voice entity.
.1.3.6.1.4.1.11.2.14.11.15.2.39.14.1.2.1.2,HPN-ICF-VOICE-DIAL-CONTROL-MIB::hpnicfVoEntityCfgCodec1st,INTEGER,read-write,,current,g711a(1):g711u(2):g723r53(3):g723r63(4):g729r8(5):g729a(6):g726r16(7):g726r24(8):g726r32(9):g726r40(10):unknown(11):g729br8(12),This object indicates the first desirable CODEC of speech of this dial entity.
.1.3.6.1.4.1.11.2.14.11.15.2.39.14.1.2.1.3,HPN-ICF-VOICE-DIAL-CONTROL-MIB::hpnicfVoEntityCfgCodec2nd,INTEGER,read-write,,current,g711a(1):g711u(2):g723r53(3):g723r63(4):g729r8(5):g729a(6):g726r16(7):g726r24(8):g726r32(9):g726r40(10):unknown(11):g729br8(12),This object indicates the second desirable CODEC of speech of this dial entity.
.1.3.6.1.4.1.11.2.14.11.15.2.39.14.1.2.1.4,HPN-ICF-VOICE-DIAL-CONTROL-MIB::hpnicfVoEntityCfgCodec3rd,INTEGER,read-write,,current,g711a(1):g711u(2):g723r53(3):g723r63(4):g729r8(5):g729a(6):g726r16(7):g726r24(8):g726r32(9):g726r40(10):unknown(11):g729br8(12),This object indicates the third desirable CODEC of speech of this dial entity.
.1.3.6.1.4.1.11.2.14.11.15.2.39.14.1.2.1.5,HPN-ICF-VOICE-DIAL-CONTROL-MIB::hpnicfVoEntityCfgCodec4th,INTEGER,read-write,,current,g711a(1):g711u(2):g723r53(3):g723r63(4):g729r8(5):g729a(6):g726r16(7):g726r24(8):g726r32(9):g726r40(10):unknown(11):g729br8(12),This object indicates the forth desirable CODEC of speech of this dial entity.
.1.3.6.1.4.1.11.2.14.11.15.2.39.14.1.2.1.6,HPN-ICF-VOICE-DIAL-CONTROL-MIB::hpnicfVoEntityCfgDSCP,Integer32,read-write,,current,,This object indicates the DSCP(Different Service Code Point) value of voice packets.
.1.3.6.1.4.1.11.2.14.11.15.2.39.14.1.2.1.7,HPN-ICF-VOICE-DIAL-CONTROL-MIB::hpnicfVoEntityCfgVADEnable,INTEGER,read-write,,current,true(1):false(2),This object indicates whether the VAD(Voice Activity Detection) is enabled.
.1.3.6.1.4.1.11.2.14.11.15.2.39.14.1.2.1.8,HPN-ICF-VOICE-DIAL-CONTROL-MIB::hpnicfVoEntityCfgOutbandMode,INTEGER,read-write,,current,voice(1):h245AlphaNumeric(2):h225(3):sip(4):nte(5):vofr(6),This object indicates the DTMF(Dual Tone Multi-Frequency) outband type of this dial entity.
.1.3.6.1.4.1.11.2.14.11.15.2.39.14.1.2.1.9,HPN-ICF-VOICE-DIAL-CONTROL-MIB::hpnicfVoEntityCfgFaxLevel,Integer32,read-write,,current,,This object indicates the fax level of this dial entity.
.1.3.6.1.4.1.11.2.14.11.15.2.39.14.1.2.1.10,HPN-ICF-VOICE-DIAL-CONTROL-MIB::hpnicfVoEntityCfgFaxBaudrate,INTEGER,read-write,,current,disable(1):voice(2):b2400(3):b4800(4):b9600(5):b14400(6),This object indicates the fax baudrate of this dial entity.
.1.3.6.1.4.1.11.2.14.11.15.2.39.14.1.2.1.11,HPN-ICF-VOICE-DIAL-CONTROL-MIB::hpnicfVoEntityCfgFaxLocalTrainPara,Integer32,read-write,,current,,This object indicates the fax local train threshold of this dial entity.
.1.3.6.1.4.1.11.2.14.11.15.2.39.14.1.2.1.12,HPN-ICF-VOICE-DIAL-CONTROL-MIB::hpnicfVoEntityCfgFaxProtocol,INTEGER,read-write,,current,t38(1):standardt38(2):pcmG711alaw(3):pcmG711ulaw(4),This object indicates the fax protocol of this dial entity.
.1.3.6.1.4.1.11.2.14.11.15.2.39.14.1.2.1.13,HPN-ICF-VOICE-DIAL-CONTROL-MIB::hpnicfVoEntityCfgFaxHRPackNum,Integer32,read-write,,current,,This object indicates the high speed redundancy packet numbers of t38 and standard-t38.
.1.3.6.1.4.1.11.2.14.11.15.2.39.14.1.2.1.14,HPN-ICF-VOICE-DIAL-CONTROL-MIB::hpnicfVoEntityCfgFaxLRPackNum,Integer32,read-write,,current,,This object indicates the low speed redundancy packet numbers of t38 and standard-t38.
.1.3.6.1.4.1.11.2.14.11.15.2.39.14.1.2.1.15,HPN-ICF-VOICE-DIAL-CONTROL-MIB::hpnicfVoEntityCfgFaxSendNSFEnable,INTEGER,read-write,,current,true(1):false(2),This object indicates whether sends NSF(Non-Standard Faculty) to fax of this dial entity.
.1.3.6.1.4.1.11.2.14.11.15.2.39.14.1.2.1.16,HPN-ICF-VOICE-DIAL-CONTROL-MIB::hpnicfVoEntityCfgFaxTrainMode,INTEGER,read-write,,current,local(1):ppp(2),This object indicates the fax train mode of this dial entity.
.1.3.6.1.4.1.11.2.14.11.15.2.39.14.1.2.1.17,HPN-ICF-VOICE-DIAL-CONTROL-MIB::hpnicfVoEntityCfgFaxEcm,INTEGER,read-write,,current,true(1):false(2),This object indicates whether the ECM(Error Correct Mode) is enabled.
.1.3.6.1.4.1.11.2.14.11.15.2.39.14.1.2.1.18,HPN-ICF-VOICE-DIAL-CONTROL-MIB::hpnicfVoEntityCfgPriority,Integer32,read-write,,current,,This object indicates the priority of this dial entity.
.1.3.6.1.4.1.11.2.14.11.15.2.39.14.1.2.1.19,HPN-ICF-VOICE-DIAL-CONTROL-MIB::hpnicfVoEntityCfgDescription,OCTET,read-write,,current,,This object indicates the textual description of this dial entity.
.1.3.6.1.4.1.11.2.14.11.15.2.39.14.1.3,HPN-ICF-VOICE-DIAL-CONTROL-MIB::hpnicfVoPOTSEntityConfigTable,,not-accessible,,current,,This table contains the POTS(Public Switched Telephone Network) entity information.
.1.3.6.1.4.1.11.2.14.11.15.2.39.14.1.3.1,HPN-ICF-VOICE-DIAL-CONTROL-MIB::hpnicfVoPOTSEntityConfigEntry,,not-accessible,hpnicfVoPOTSEntityConfigIndex,current,,The entry of hpnicfVoPOTSEntityConfigTable.
.1.3.6.1.4.1.11.2.14.11.15.2.39.14.1.3.1.1,HPN-ICF-VOICE-DIAL-CONTROL-MIB::hpnicfVoPOTSEntityConfigIndex,Integer32,not-accessible,,current,,An arbitrary index that uniquely identifies a voice entity.
.1.3.6.1.4.1.11.2.14.11.15.2.39.14.1.3.1.2,HPN-ICF-VOICE-DIAL-CONTROL-MIB::hpnicfVoPOTSEntityConfigPrefix,OCTET,read-write,,current,,This object indicates the prefix which is added to the called number.
.1.3.6.1.4.1.11.2.14.11.15.2.39.14.1.3.1.3,HPN-ICF-VOICE-DIAL-CONTROL-MIB::hpnicfVoPOTSEntityConfigSubLine,OCTET,read-write,,current,,This object indicates the voice subscriber line of this dial entity.
.1.3.6.1.4.1.11.2.14.11.15.2.39.14.1.3.1.4,HPN-ICF-VOICE-DIAL-CONTROL-MIB::hpnicfVoPOTSEntityConfigSendNum,Integer32,read-write,,current,,This object indicates the digit of phone number to be sent to the destination. 0..31: Number of digits (that are extracted from the end of a number) to be sent, in the range of 0 to 31. It is not greater than the total number of digits of the called number. 65534: Sends all digits of a called number. 65535: Sends a truncated called number.
.1.3.6.1.4.1.11.2.14.11.15.2.39.14.1.4,HPN-ICF-VOICE-DIAL-CONTROL-MIB::hpnicfVoVoIPEntityConfigTable,,not-accessible,,current,,This table contains the VoIP entity information.
.1.3.6.1.4.1.11.2.14.11.15.2.39.14.1.4.1,HPN-ICF-VOICE-DIAL-CONTROL-MIB::hpnicfVoVoIPEntityConfigEntry,,not-accessible,hpnicfVoVoIPEntityCfgIndex,current,,The entry of hpnicfVoVoIPEntityConfigTable.
.1.3.6.1.4.1.11.2.14.11.15.2.39.14.1.4.1.1,HPN-ICF-VOICE-DIAL-CONTROL-MIB::hpnicfVoVoIPEntityCfgIndex,Integer32,not-accessible,,current,,An arbitrary index that uniquely identifies a voice entity.
.1.3.6.1.4.1.11.2.14.11.15.2.39.14.1.4.1.2,HPN-ICF-VOICE-DIAL-CONTROL-MIB::hpnicfVoVoIPEntityCfgTargetType,INTEGER,read-write,,current,unknown(1):ras(2):h323IpAddress(3):sipIpAddress(4):sipProxy(5),This object indicates the type of the session target of this entity.
.1.3.6.1.4.1.11.2.14.11.15.2.39.14.1.4.1.3,HPN-ICF-VOICE-DIAL-CONTROL-MIB::hpnicfVoVoIPEntityCfgTargetAddrType,INTEGER,read-write,,current,unknown(0):ipv4(1):ipv6(2):ipv4z(3):ipv6z(4):dns(16),The IP address type of object hpnicfVoVoIPEntityCfgTargetAddr.
.1.3.6.1.4.1.11.2.14.11.15.2.39.14.1.4.1.4,HPN-ICF-VOICE-DIAL-CONTROL-MIB::hpnicfVoVoIPEntityCfgTargetAddr,OCTET,read-write,,current,,This object indicates the target IP address.
.1.3.6.1.4.1.11.2.14.11.15.2.39.14.1.5,HPN-ICF-VOICE-DIAL-CONTROL-MIB::hpnicfVoEntityNumberTable,,not-accessible,,current,,The table contains the number management information.
.1.3.6.1.4.1.11.2.14.11.15.2.39.14.1.5.1,HPN-ICF-VOICE-DIAL-CONTROL-MIB::hpnicfVoEntityNumberEntry,,not-accessible,hpnicfVoEntityIndex,current,,The entry of hpnicfVoEntityNumberTable. HpnicfVoEntityIndex is used to uniquely identify these numbers registered on the server. The same value of hpnicfVoEntityIndex used in the corresponding HPN-ICFVoEntityCommonConfigTable is used here.
.1.3.6.1.4.1.11.2.14.11.15.2.39.14.1.5.1.1,HPN-ICF-VOICE-DIAL-CONTROL-MIB::hpnicfVoEntityNumberAuthUser,OCTET,read-write,,current,,This object indicates the username of the entity number to authorize.
.1.3.6.1.4.1.11.2.14.11.15.2.39.14.1.5.1.2,HPN-ICF-VOICE-DIAL-CONTROL-MIB::hpnicfVoEntityNumberPasswordType,Integer32,read-write,,current,,This object indicates the password type of the entity number to authorize. The encrypting type of password: 0 : password simple, means password is clean text. 1 : password cipher, means password is encrypted text. default is 65535.
.1.3.6.1.4.1.11.2.14.11.15.2.39.14.1.5.1.3,HPN-ICF-VOICE-DIAL-CONTROL-MIB::hpnicfVoEntityNumberPassword,OCTET,read-write,,current,,This object indicates the password of the entity number to authorize.
.1.3.6.1.4.1.11.2.14.11.15.2.39.14.1.5.1.4,HPN-ICF-VOICE-DIAL-CONTROL-MIB::hpnicfVoEntityNumberStatus,INTEGER,read-only,,current,other(1):offline(2):online(3):login(4):logout(5),This object indicates the current state of the entity number.
.1.3.6.1.4.1.11.2.14.11.15.2.39.14.1.5.1.5,HPN-ICF-VOICE-DIAL-CONTROL-MIB::hpnicfVoEntityNumberExpires,Integer32,read-only,,current,,This is the interval time for entity number updating registered message.
.1.3.6.1.4.1.11.2.14.11.15.2.39.15,HPN-ICF-VOICE-CALL-ACTIVE-MIB::hpnicfVoCallActive,,,,,,This MIB file is to provide the definition of voice call active record information.
.1.3.6.1.4.1.11.2.14.11.15.2.39.15.1,HPN-ICF-VOICE-CALL-ACTIVE-MIB::hpnicfVoiceCallActiveObjects,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.2.39.15.1.1,HPN-ICF-VOICE-CALL-ACTIVE-MIB::hpnicfVoiceCallActiveTable,,not-accessible,,current,,This table is the voice extension to the call active table of DIAL-CONTROL-MIB. It contains voice encapsulation call leg information that is derived from the statistics of lower layer telephony interface.
.1.3.6.1.4.1.11.2.14.11.15.2.39.15.1.1.1,HPN-ICF-VOICE-CALL-ACTIVE-MIB::hpnicfVoiceCallActiveEntry,,not-accessible,callActiveSetupTime:callActiveIndex,current,,The information regarding a single voice encapsulation call leg. The call leg entry is identified by using the same index objects that are used by call active table of DIAL-CONTROL-MIB to identify the call. An entry of this table is created when its associated call active entry in the DIAL-CONTROL-MIB is created and call active entry contains the call establishment to a voice over telephony network peer. The entry is deleted when its associated call active entry in the DIAL-CONTROL-MIB is deleted.
.1.3.6.1.4.1.11.2.14.11.15.2.39.15.1.1.1.1,HPN-ICF-VOICE-CALL-ACTIVE-MIB::hpnicfVoCallActiveConnectionId,OCTET,read-only,,current,,The global call identifier for the gateway call.
.1.3.6.1.4.1.11.2.14.11.15.2.39.15.1.1.1.2,HPN-ICF-VOICE-CALL-ACTIVE-MIB::hpnicfVoCallActiveTxDuration,Gauge32,read-only,,current,,Duration of transmit path open from this peer to the voice gateway for the call. The units is milliseconds.
.1.3.6.1.4.1.11.2.14.11.15.2.39.15.1.1.1.3,HPN-ICF-VOICE-CALL-ACTIVE-MIB::hpnicfVoCallActiveVoiceTxDuration,Gauge32,read-only,,current,,Duration of voice transmitted from this peer to voice gateway for this call. The voice utilization rate can be obtained by dividing this by hpnicfVoCallActiveTXDuration object. The units is milliseconds.
.1.3.6.1.4.1.11.2.14.11.15.2.39.15.1.1.1.4,HPN-ICF-VOICE-CALL-ACTIVE-MIB::hpnicfVoCallActiveFaxTxDuration,Gauge32,read-only,,current,,Duration of fax transmitted from this peer to voice gateway for this call. The fax utilization rate can be obtained by dividing this by hpnicfVoCallActiveTXDuration object. The units is milliseconds.
.1.3.6.1.4.1.11.2.14.11.15.2.39.15.1.1.1.5,HPN-ICF-VOICE-CALL-ACTIVE-MIB::hpnicfVoCallActiveCoderType,INTEGER,read-only,,current,g711a(1):g711u(2):g723r53(3):g723r63(4):g729r8(5):g729a(6):g726r16(7):g726r24(8):g726r32(9):g726r40(10):unknown(11):g729br8(12),The negotiated coder type. It specifies the encode type to the PSTN leg of a call.
.1.3.6.1.4.1.11.2.14.11.15.2.39.15.1.1.1.6,HPN-ICF-VOICE-CALL-ACTIVE-MIB::hpnicfVoCallActiveImgPageCount,Gauge32,read-only,,current,,The number of fax related image pages are received or transmitted via the peer for the call. The units is pages.
.1.3.6.1.4.1.11.2.14.11.15.2.39.15.1.2,HPN-ICF-VOICE-CALL-ACTIVE-MIB::hpnicfVoiceVoIPCallActiveTable,,not-accessible,,current,,This table is the VoIP extension to the call active table of DIAL-CONTROL-MIB. It contains VoIP call leg information about specific VoIP call destination.
.1.3.6.1.4.1.11.2.14.11.15.2.39.15.1.2.1,HPN-ICF-VOICE-CALL-ACTIVE-MIB::hpnicfVoiceVoIPCallActiveEntry,,not-accessible,callActiveSetupTime:callActiveIndex,current,,The information regarding a single VoIP call leg. The call leg entry is identified by using the same index objects that are used by call active table of DIAL-CONTROL-MIB to identify the call. An entry of this table is created when its associated call active entry in the DIAL-CONTROL-MIB is created and the call active entry contains information for the call establishment to the peer on the IP backbone via a voice over IP peer. The entry is deleted when its associated call active entry in the DIAL-CONTROL-MIB is deleted.
.1.3.6.1.4.1.11.2.14.11.15.2.39.15.1.2.1.1,HPN-ICF-VOICE-CALL-ACTIVE-MIB::hpnicfVoVoIPCallActiveConnectionId,OCTET,read-only,,current,,The global call identifier for the gateway call.
.1.3.6.1.4.1.11.2.14.11.15.2.39.15.1.2.1.2,HPN-ICF-VOICE-CALL-ACTIVE-MIB::hpnicfVoVoIPCallActiveRemSigIPType,INTEGER,read-only,,current,unknown(0):ipv4(1):ipv6(2):ipv4z(3):ipv6z(4):dns(16),The type of remote system signalling IP address for the VoIP call.
.1.3.6.1.4.1.11.2.14.11.15.2.39.15.1.2.1.3,HPN-ICF-VOICE-CALL-ACTIVE-MIB::hpnicfVoVoIPCallActiveRemSigIPAddr,OCTET,read-only,,current,,Remote system signalling IP address for the VoIP call.
.1.3.6.1.4.1.11.2.14.11.15.2.39.15.1.2.1.4,HPN-ICF-VOICE-CALL-ACTIVE-MIB::hpnicfVoVoIPCallActiveRemSigPort,Integer32,read-only,,current,,Remote system UDP listener signalling port to which to transmit voice packets.
.1.3.6.1.4.1.11.2.14.11.15.2.39.15.1.2.1.5,HPN-ICF-VOICE-CALL-ACTIVE-MIB::hpnicfVoVoIPCallActiveRemMedIPType,INTEGER,read-only,,current,unknown(0):ipv4(1):ipv6(2):ipv4z(3):ipv6z(4):dns(16),The type of remote system media IP address for the VoIP call.
.1.3.6.1.4.1.11.2.14.11.15.2.39.15.1.2.1.6,HPN-ICF-VOICE-CALL-ACTIVE-MIB::hpnicfVoVoIPCallActiveRemMedIPAddr,OCTET,read-only,,current,,Remote system media IP address for the VoIP call.
.1.3.6.1.4.1.11.2.14.11.15.2.39.15.1.2.1.7,HPN-ICF-VOICE-CALL-ACTIVE-MIB::hpnicfVoVoIPCallActiveRemMedPort,Integer32,read-only,,current,,Remote system UDP listener media port to which to transmit voice packets.
.1.3.6.1.4.1.11.2.14.11.15.2.39.15.1.2.1.8,HPN-ICF-VOICE-CALL-ACTIVE-MIB::hpnicfVoVoIPCallActiveSessProtocol,INTEGER,read-only,,current,unknown(1):h323(2):sip(3),The object specifies the session protocol to be used for internet call between local and remote router via IP backbone.
.1.3.6.1.4.1.11.2.14.11.15.2.39.15.1.2.1.9,HPN-ICF-VOICE-CALL-ACTIVE-MIB::hpnicfVoVoIPCallActiveCoderType,INTEGER,read-only,,current,g711a(1):g711u(2):g723r53(3):g723r63(4):g729r8(5):g729a(6):g726r16(7):g726r24(8):g726r32(9):g726r40(10):unknown(11):g729br8(12),The negotiated coder type. It specifies the encode type to the VoIP leg of a call.
.1.3.6.1.4.1.11.2.14.11.15.2.39.16,HPN-ICF-VOICE-CALL-HISTORY-MIB::hpnicfVoCallHistory,,,,,,This MIB file is to provide the definition of voice call history record information.
.1.3.6.1.4.1.11.2.14.11.15.2.39.16.1,HPN-ICF-VOICE-CALL-HISTORY-MIB::hpnicfVoiceCallHistoryObjects,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.2.39.16.1.1,HPN-ICF-VOICE-CALL-HISTORY-MIB::hpnicfCallHistoryTable,,not-accessible,,current,,A table containing information about specific calls to a specific destination.
.1.3.6.1.4.1.11.2.14.11.15.2.39.16.1.1.1,HPN-ICF-VOICE-CALL-HISTORY-MIB::hpnicfCallHistoryEntry,,not-accessible,hpnicfCallHistoryIndex,current,,The information regarding a single connection.
.1.3.6.1.4.1.11.2.14.11.15.2.39.16.1.1.1.1,HPN-ICF-VOICE-CALL-HISTORY-MIB::hpnicfCallHistoryIndex,Integer32,not-accessible,,current,,The index of the call history table. It's a monotonically increasing integer for the sole purpose of indexing call disconnection events. When it reaches to the maximum value, the value will back to 1.
.1.3.6.1.4.1.11.2.14.11.15.2.39.16.1.1.1.2,HPN-ICF-VOICE-CALL-HISTORY-MIB::hpnicfCallHistorySetupTime,TimeTicks,read-only,,current,,The value of sysUpTime when the call was started.
.1.3.6.1.4.1.11.2.14.11.15.2.39.16.1.1.1.3,HPN-ICF-VOICE-CALL-HISTORY-MIB::hpnicfCallHistoryConnectTime,TimeTicks,read-only,,current,,The value of sysUpTime when the call was connected. If the call is not connected, this object will have a value of zero.
.1.3.6.1.4.1.11.2.14.11.15.2.39.16.1.1.1.4,HPN-ICF-VOICE-CALL-HISTORY-MIB::hpnicfCallHistoryTerminateTime,TimeTicks,read-only,,current,,The value of sysUpTime when the call was terminated.
.1.3.6.1.4.1.11.2.14.11.15.2.39.16.1.1.1.5,HPN-ICF-VOICE-CALL-HISTORY-MIB::hpnicfCallHistoryPeerAddress,OCTET,read-only,,current,,The number this call was connected to. If the number is not available, it will have a length of zero.
.1.3.6.1.4.1.11.2.14.11.15.2.39.16.1.1.1.6,HPN-ICF-VOICE-CALL-HISTORY-MIB::hpnicfCallHistoryPeerId,Integer32,read-only,,current,,This object identifies a single peer. This is the Id value of the peer table entry to which this call was made. If a peer table entry for this call does not exist or is unknown, the value of this object will be zero.
.1.3.6.1.4.1.11.2.14.11.15.2.39.16.1.1.1.7,HPN-ICF-VOICE-CALL-HISTORY-MIB::hpnicfCallHistoryLogicalIfIndex,Integer32,read-only,,current,,This is the ifIndex value of the logical interface through which this call was made. For ISDN media, this would be the ifIndex of the B channel which was used for this call. If the ifIndex value is unknown, the value of this object will be zero.
.1.3.6.1.4.1.11.2.14.11.15.2.39.16.1.1.1.8,HPN-ICF-VOICE-CALL-HISTORY-MIB::hpnicfCallHistoryCallOrigin,INTEGER,read-only,,current,originate(1):answer(2):callback(3),The call origin. originate The call that is initiated. answer The call that is accepted. callback Either rejects the call and then calls back, or uses the 'Reverse charging' information element if it is available. Note that callback(3) is supposed to control charging, not security, and applies to callback prior to accepting a call. Callback for security reasons can be handled using PPP callback.
.1.3.6.1.4.1.11.2.14.11.15.2.39.16.1.1.1.9,HPN-ICF-VOICE-CALL-HISTORY-MIB::hpnicfCallHistoryChargedUnits,Unsigned32,read-only,,current,,The number of charged units for this connection. For incoming calls or if charging information is not supplied by the switch, the value of this object will be zero.
.1.3.6.1.4.1.11.2.14.11.15.2.39.16.1.1.1.10,HPN-ICF-VOICE-CALL-HISTORY-MIB::hpnicfCallHistoryInfoType,INTEGER,read-only,,current,other(1):speech(2):unrestrictedDigital(3):unrestrictedDigital56(4):restrictedDigital(5):audio31(6):audio7(7):video(8):packetSwitched(9):fax(10),The information type for this call. other E.g. for non-isdn media. speech Speech. unrestrictedDigital Unrestricted digital information with 64k rate adaption. unrestrictedDigital56 Unrestricted digital information with 56k rate adaption. restrictedDigital Restricted digital information. audio31 3.1 kHz audio. audio7 7 kHz audio. video Video. packetSwitched Packetswitch. fax Fax.
.1.3.6.1.4.1.11.2.14.11.15.2.39.16.1.1.1.11,HPN-ICF-VOICE-CALL-HISTORY-MIB::hpnicfCallHistoryTransmitPackets,Unsigned32,read-only,,current,,The number of packets which were transmitted while this call was active.
.1.3.6.1.4.1.11.2.14.11.15.2.39.16.1.1.1.12,HPN-ICF-VOICE-CALL-HISTORY-MIB::hpnicfCallHistoryTransmitBytes,Unsigned32,read-only,,current,,The number of bytes which were transmitted for this call.
.1.3.6.1.4.1.11.2.14.11.15.2.39.16.1.1.1.13,HPN-ICF-VOICE-CALL-HISTORY-MIB::hpnicfCallHistoryReceivePackets,Unsigned32,read-only,,current,,The number of packets which were received for this call.
.1.3.6.1.4.1.11.2.14.11.15.2.39.16.1.1.1.14,HPN-ICF-VOICE-CALL-HISTORY-MIB::hpnicfCallHistoryReceiveBytes,Unsigned32,read-only,,current,,The number of bytes which were received for this call.
.1.3.6.1.4.1.11.2.14.11.15.2.39.16.1.2,HPN-ICF-VOICE-CALL-HISTORY-MIB::hpnicfVoiceCallHistoryTable,,not-accessible,,current,,This table is the voice extension to the call history table of DIAL-CONTROL-MIB. It contains voice encapsulation call leg information that is derived from the statistics of lower layer telephony interface.
.1.3.6.1.4.1.11.2.14.11.15.2.39.16.1.2.1,HPN-ICF-VOICE-CALL-HISTORY-MIB::hpnicfVoiceCallHistoryEntry,,not-accessible,hpnicfCallHistoryIndex,current,,The information regarding a extended voice call history information.
.1.3.6.1.4.1.11.2.14.11.15.2.39.16.1.2.1.1,HPN-ICF-VOICE-CALL-HISTORY-MIB::hpnicfVoCallHistoryConnectionId,OCTET,read-only,,current,,The global call identifier of circuit switched network for the gateway call.
.1.3.6.1.4.1.11.2.14.11.15.2.39.16.1.2.1.2,HPN-ICF-VOICE-CALL-HISTORY-MIB::hpnicfVoCallHistoryTxDuration,Gauge32,read-only,,current,,Duration of transmit path open from this peer to the voice gateway for the call. The units is milliseconds.
.1.3.6.1.4.1.11.2.14.11.15.2.39.16.1.2.1.3,HPN-ICF-VOICE-CALL-HISTORY-MIB::hpnicfVoCallHistoryVoiceTxDuration,Gauge32,read-only,,current,,Duration of voice transmitted from this peer to voice gateway for this call. The voice utilization rate can be obtained by dividing this by hpnicfVoCallHistoryTxDuration object. The units is milliseconds.
.1.3.6.1.4.1.11.2.14.11.15.2.39.16.1.2.1.4,HPN-ICF-VOICE-CALL-HISTORY-MIB::hpnicfVoCallHistoryFaxTxDuration,Gauge32,read-only,,current,,Duration of fax transmitted from this peer to voice gateway for this call. The fax utilization rate can be obtained by dividing this by hpnicfVoCallHistoryTxDuration object. The units is milliseconds.
.1.3.6.1.4.1.11.2.14.11.15.2.39.16.1.2.1.5,HPN-ICF-VOICE-CALL-HISTORY-MIB::hpnicfVoCallHistoryCoderType,INTEGER,read-only,,current,g711a(1):g711u(2):g723r53(3):g723r63(4):g729r8(5):g729a(6):g726r16(7):g726r24(8):g726r32(9):g726r40(10):unknown(11):g729br8(12),The negotiated coder type. It specifies the encode type to the PSTN leg of a call.
.1.3.6.1.4.1.11.2.14.11.15.2.39.16.1.2.1.6,HPN-ICF-VOICE-CALL-HISTORY-MIB::hpnicfVoCallHistoryImgPageCount,Gauge32,read-only,,current,,The number of fax related image pages are received or transmitted via the peer for the call. The units is page.
.1.3.6.1.4.1.11.2.14.11.15.2.39.16.1.3,HPN-ICF-VOICE-CALL-HISTORY-MIB::hpnicfVoiceVoIPCallHistoryTable,,not-accessible,,current,,This table is the VoIP extension to the call active table of DIAL-CONTROL-MIB. It contains VoIP call leg information about specific VoIP call destination.
.1.3.6.1.4.1.11.2.14.11.15.2.39.16.1.3.1,HPN-ICF-VOICE-CALL-HISTORY-MIB::hpnicfVoiceVoIPCallHistoryEntry,,not-accessible,hpnicfCallHistoryIndex,current,,The information regarding a extended VoIP call history information.
.1.3.6.1.4.1.11.2.14.11.15.2.39.16.1.3.1.1,HPN-ICF-VOICE-CALL-HISTORY-MIB::hpnicfVoVoIPCallHistoryConnectionId,OCTET,read-only,,current,,The global call identifier of packet-switched network for the gateway call.
.1.3.6.1.4.1.11.2.14.11.15.2.39.16.1.3.1.2,HPN-ICF-VOICE-CALL-HISTORY-MIB::hpnicfVoVoIPCallHistoryRemSigIPType,INTEGER,read-only,,current,unknown(0):ipv4(1):ipv6(2):ipv4z(3):ipv6z(4):dns(16),The type of remote system signalling IP address for the VoIP call.
.1.3.6.1.4.1.11.2.14.11.15.2.39.16.1.3.1.3,HPN-ICF-VOICE-CALL-HISTORY-MIB::hpnicfVoVoIPCallHistoryRemSigIPAddr,OCTET,read-only,,current,,Remote system signalling IP address for the VoIP call.
.1.3.6.1.4.1.11.2.14.11.15.2.39.16.1.3.1.4,HPN-ICF-VOICE-CALL-HISTORY-MIB::hpnicfVoVoIPCallHistoryRemSigPort,Integer32,read-only,,current,,Remote system UDP listener signalling port to which to transmit voice packets.
.1.3.6.1.4.1.11.2.14.11.15.2.39.16.1.3.1.5,HPN-ICF-VOICE-CALL-HISTORY-MIB::hpnicfVoVoIPCallHistoryRemMedIPType,INTEGER,read-only,,current,unknown(0):ipv4(1):ipv6(2):ipv4z(3):ipv6z(4):dns(16),The type of remote system media IP address for the VoIP call.
.1.3.6.1.4.1.11.2.14.11.15.2.39.16.1.3.1.6,HPN-ICF-VOICE-CALL-HISTORY-MIB::hpnicfVoVoIPCallHistoryRemMedIPAddr,OCTET,read-only,,current,,Remote system media IP address for the VoIP call.
.1.3.6.1.4.1.11.2.14.11.15.2.39.16.1.3.1.7,HPN-ICF-VOICE-CALL-HISTORY-MIB::hpnicfVoVoIPCallHistoryRemMedPort,Integer32,read-only,,current,,Remote system UDP listener media port to which to transmit voice packets.
.1.3.6.1.4.1.11.2.14.11.15.2.39.16.1.3.1.8,HPN-ICF-VOICE-CALL-HISTORY-MIB::hpnicfVoVoIPCallHistorySessProtocol,INTEGER,read-only,,current,unknown(1):h323(2):sip(3),The object specifies the session protocol to be used for internet call between local and remote router via IP backbone. unknown The protocol is unknown. h323 The protocol is H323. sip The protocol is session initiation.
.1.3.6.1.4.1.11.2.14.11.15.2.39.16.1.3.1.9,HPN-ICF-VOICE-CALL-HISTORY-MIB::hpnicfVoVoIPCallHistoryCoderType,INTEGER,read-only,,current,g711a(1):g711u(2):g723r53(3):g723r63(4):g729r8(5):g729a(6):g726r16(7):g726r24(8):g726r32(9):g726r40(10):unknown(11):g729br8(12),The negotiated coder type. It specifies the encode type to the VoIP leg of a call.
.1.3.6.1.4.1.11.2.14.11.15.2.40,HPN-ICF-OID-MIB::hpnicfIfExt,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.2.40.1,HPN-ICF-IF-EXT-MIB::hpnicfIfExtScalarGroup,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.2.40.1.1,HPN-ICF-IF-EXT-MIB::hpnicfIfStatGlobalFlowInterval,Integer32,read-write,,current,,Sampling interval for in/out flow of all interfaces. Setting zero indicates closing the statistic function.
.1.3.6.1.4.1.11.2.14.11.15.2.40.2,HPN-ICF-IF-EXT-MIB::hpnicfIfExtGroup,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.2.40.2.1,HPN-ICF-IF-EXT-MIB::hpnicfIfStat,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.2.40.2.1.1,HPN-ICF-IF-EXT-MIB::hpnicfIfStatScalarGroup,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.2.40.2.1.2,HPN-ICF-IF-EXT-MIB::hpnicfIfStatTable,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.2.40.2.1.2.1,HPN-ICF-IF-EXT-MIB::hpnicfIfFlowStatTable,,not-accessible,,current,,This table contains objects to get statistic information of interfaces on a device.
.1.3.6.1.4.1.11.2.14.11.15.2.40.2.1.2.1.1,HPN-ICF-IF-EXT-MIB::hpnicfIfFlowStatEntry,,not-accessible,ifIndex,current,,Entry items
.1.3.6.1.4.1.11.2.14.11.15.2.40.2.1.2.1.1.1,HPN-ICF-IF-EXT-MIB::hpnicfIfStatFlowInterval,Integer32,read-write,,current,,Sampling interval for in/out flow of interface. Setting zero indicates closing this statistic function and objects in this table should return 0.
.1.3.6.1.4.1.11.2.14.11.15.2.40.2.1.2.1.1.2,HPN-ICF-IF-EXT-MIB::hpnicfIfStatFlowInBits,Unsigned32,read-only,,current,,In bits in the specific interval.
.1.3.6.1.4.1.11.2.14.11.15.2.40.2.1.2.1.1.3,HPN-ICF-IF-EXT-MIB::hpnicfIfStatFlowOutBits,Unsigned32,read-only,,current,,Out bits in specific interval.
.1.3.6.1.4.1.11.2.14.11.15.2.40.2.1.2.1.1.4,HPN-ICF-IF-EXT-MIB::hpnicfIfStatFlowInPkts,Unsigned32,read-only,,current,,In Packets in the specific interval.
.1.3.6.1.4.1.11.2.14.11.15.2.40.2.1.2.1.1.5,HPN-ICF-IF-EXT-MIB::hpnicfIfStatFlowOutPkts,Unsigned32,read-only,,current,,Out packets in the specific interval.
.1.3.6.1.4.1.11.2.14.11.15.2.40.2.1.2.1.1.6,HPN-ICF-IF-EXT-MIB::hpnicfIfStatFlowInBytes,Unsigned32,read-only,,current,,In bytes in the specific interval.
.1.3.6.1.4.1.11.2.14.11.15.2.40.2.1.2.1.1.7,HPN-ICF-IF-EXT-MIB::hpnicfIfStatFlowOutBytes,Unsigned32,read-only,,current,,Out bytes in the specific interval.
.1.3.6.1.4.1.11.2.14.11.15.2.40.2.1.2.2,HPN-ICF-IF-EXT-MIB::hpnicfIfSpeedStatTable,,not-accessible,,current,,This table contains objects to get average speed information in the specific interval of interfaces on a device.
.1.3.6.1.4.1.11.2.14.11.15.2.40.2.1.2.2.1,HPN-ICF-IF-EXT-MIB::hpnicfIfSpeedStatEntry,,not-accessible,ifIndex,current,,Entry items
.1.3.6.1.4.1.11.2.14.11.15.2.40.2.1.2.2.1.1,HPN-ICF-IF-EXT-MIB::hpnicfIfSpeedStatInterval,Integer32,read-write,,current,,Sampling interval for in/out flow of interface. Setting zero indicates closing this statistic function and objects in this table should return 0.
.1.3.6.1.4.1.11.2.14.11.15.2.40.2.1.2.2.1.2,HPN-ICF-IF-EXT-MIB::hpnicfIfSpeedStatInPkts,Unsigned32,read-only,,current,,Average of input packets per second in the specific interval by hpnicfIfSpeedStatInterval.
.1.3.6.1.4.1.11.2.14.11.15.2.40.2.1.2.2.1.3,HPN-ICF-IF-EXT-MIB::hpnicfIfSpeedStatOutPkts,Unsigned32,read-only,,current,,Average of output packets per second in the specific interval by hpnicfIfSpeedStatInterval.
.1.3.6.1.4.1.11.2.14.11.15.2.40.2.1.2.2.1.4,HPN-ICF-IF-EXT-MIB::hpnicfIfSpeedStatInBytes,Unsigned32,read-only,,current,,Average of input bytes per second in the specific interval by hpnicfIfSpeedStatInterval.
.1.3.6.1.4.1.11.2.14.11.15.2.40.2.1.2.2.1.5,HPN-ICF-IF-EXT-MIB::hpnicfIfSpeedStatOutBytes,Unsigned32,read-only,,current,,Average of output bytes per second in the specific interval by hpnicfIfSpeedStatInterval.
.1.3.6.1.4.1.11.2.14.11.15.2.40.2.1.2.3,HPN-ICF-IF-EXT-MIB::hpnicfIfHCFlowStatTable,,not-accessible,,current,,This table contains objects to get statistic information of interfaces on a device.
.1.3.6.1.4.1.11.2.14.11.15.2.40.2.1.2.3.1,HPN-ICF-IF-EXT-MIB::hpnicfIfHCFlowStatEntry,,not-accessible,ifIndex,current,,Entry items
.1.3.6.1.4.1.11.2.14.11.15.2.40.2.1.2.3.1.1,HPN-ICF-IF-EXT-MIB::hpnicfIfStatFlowHCInBits,Counter64,read-only,,current,,In bits in the specific interval. This object is a 64-bit version of hpnicfIfStatFlowInBits.
.1.3.6.1.4.1.11.2.14.11.15.2.40.2.1.2.3.1.2,HPN-ICF-IF-EXT-MIB::hpnicfIfStatFlowHCOutBits,Counter64,read-only,,current,,Out bits in specific interval. This object is a 64-bit version of hpnicfIfStatFlowOutBits.
.1.3.6.1.4.1.11.2.14.11.15.2.40.2.1.2.3.1.3,HPN-ICF-IF-EXT-MIB::hpnicfIfStatFlowHCInPkts,Counter64,read-only,,current,,In Packets in the specific interval. This object is a 64-bit version of hpnicfIfStatFlowInPkts.
.1.3.6.1.4.1.11.2.14.11.15.2.40.2.1.2.3.1.4,HPN-ICF-IF-EXT-MIB::hpnicfIfStatFlowHCOutPkts,Counter64,read-only,,current,,Out packets in the specific interval. This object is a 64-bit version of hpnicfIfStatFlowOutPkts.
.1.3.6.1.4.1.11.2.14.11.15.2.40.2.1.2.3.1.5,HPN-ICF-IF-EXT-MIB::hpnicfIfStatFlowHCInBytes,Counter64,read-only,,current,,In bytes in the specific interval. This object is a 64-bit version of hpnicfIfStatFlowInBytes.
.1.3.6.1.4.1.11.2.14.11.15.2.40.2.1.2.3.1.6,HPN-ICF-IF-EXT-MIB::hpnicfIfStatFlowHCOutBytes,Counter64,read-only,,current,,Out bytes in the specific interval. This object is a 64-bit version of hpnicfIfStatFlowOutBytes.
.1.3.6.1.4.1.11.2.14.11.15.2.40.2.2,HPN-ICF-IF-EXT-MIB::hpnicfIfControl,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.2.40.2.2.1,HPN-ICF-IF-EXT-MIB::hpnicfRTParentIfTable,,not-accessible,,current,,This table contains all interfaces that can create sub interface.
.1.3.6.1.4.1.11.2.14.11.15.2.40.2.2.1.1,HPN-ICF-IF-EXT-MIB::hpnicfRTParentIfEntry,,not-accessible,hpnicfRTParentIfIndex,current,,This entry describes a interface that can create sub interface.
.1.3.6.1.4.1.11.2.14.11.15.2.40.2.2.1.1.1,HPN-ICF-IF-EXT-MIB::hpnicfRTParentIfIndex,Integer32,not-accessible,,current,,The index of interface that can creat sub interface. The value is the same as ifIndex value for this interface.
.1.3.6.1.4.1.11.2.14.11.15.2.40.2.2.1.1.2,HPN-ICF-IF-EXT-MIB::hpnicfRTMinSubIfOrdinal,Integer32,read-only,,current,,The minimum ordinal of the sub interface can be created.
.1.3.6.1.4.1.11.2.14.11.15.2.40.2.2.1.1.3,HPN-ICF-IF-EXT-MIB::hpnicfRTMaxSubIfOrdinal,Integer32,read-only,,current,,The max ordinal of the sub interface can be created.
.1.3.6.1.4.1.11.2.14.11.15.2.40.2.2.2,HPN-ICF-IF-EXT-MIB::hpnicfRTSubIfTable,,not-accessible,,current,,This table contains objects to create or delete sub interfaces. To create a sub interface, a valid parent interface must be specified by hpnicfRTSubIfParentIfIndex and the hpnicfRTSubIfOrdinal must be in the range between hpnicfRTMinSubIfOrdinal and hpnicfRTMaxSubIfOrdinal of the parent interface from hpnicfRTParentIfTable. Sub interfaces are logical virtual interfaces configured on a main interface. The main interface can be either a physical interface (such as a Layer 3 Ethernet interface) or a logical interface (such as an MFR interface). The subinterfaces on a main interface share the physical layer parameters of the main interface but can have link layer and network layer parameters of their own. Disabling or enabling a subinterface does not affect the main interface, but the main interface status change affects the subinterfaces. The subinterfaces cannot operate normally unless the main interface is connected. A single physical interface containing multiple subinterfaces enables you to network in a more flexible way. You can create subinterfaces for the following physical interfaces: Ethernet interface. An Ethernet subinterface associated with no VLAN supports only IPX, while an Ethernet subinterface associated with a VLAN supports both IP and IPX. WAN interfaces with their data link layer protocols being frame relay, whose subinterfaces support IP and IPX. WAN interfaces with their data link layer protocols being X.25, whose subinterfaces support IP and IPX. ATM interface, whose subinterfaces support only IP.
.1.3.6.1.4.1.11.2.14.11.15.2.40.2.2.2.1,HPN-ICF-IF-EXT-MIB::hpnicfRTSubIfEntry,,not-accessible,hpnicfRTSubIfParentIfIndex:hpnicfRTSubIfOrdinal,current,,The hpnicfRTSubIfTable entry items
.1.3.6.1.4.1.11.2.14.11.15.2.40.2.2.2.1.1,HPN-ICF-IF-EXT-MIB::hpnicfRTSubIfParentIfIndex,Integer32,not-accessible,,current,,The parent interface index. The value should be the same as the hpnicfRTParentIfIndex.
.1.3.6.1.4.1.11.2.14.11.15.2.40.2.2.2.1.2,HPN-ICF-IF-EXT-MIB::hpnicfRTSubIfOrdinal,Integer32,not-accessible,,current,,The ordinal of sub interface. It should between hpnicfRTMinSubIfOrdinal and hpnicfRTMaxSubIfOrdinal of the parent interface.
.1.3.6.1.4.1.11.2.14.11.15.2.40.2.2.2.1.3,HPN-ICF-IF-EXT-MIB::hpnicfRTSubIfSubIfIndex,Integer32,read-only,,current,,The ifIndex value of the sub interface
.1.3.6.1.4.1.11.2.14.11.15.2.40.2.2.2.1.4,HPN-ICF-IF-EXT-MIB::hpnicfRTSubIfSubIfDesc,OCTET,read-only,,current,,The name of the interface
.1.3.6.1.4.1.11.2.14.11.15.2.40.2.2.2.1.5,HPN-ICF-IF-EXT-MIB::hpnicfRTSubIfRowStatus,INTEGER,read-create,,current,active(1):notInService(2):notReady(3):createAndGo(4):createAndWait(5):destroy(6),Operation status.
.1.3.6.1.4.1.11.2.14.11.15.2.40.2.2.3,HPN-ICF-IF-EXT-MIB::hpnicfIfLinkModeTable,,not-accessible,,current,,This table contains objects to get or set the link mode of an interface. According to the layer at which the device processes received data packets, Ethernet interfaces can operate in bridge or route mode.
.1.3.6.1.4.1.11.2.14.11.15.2.40.2.2.3.1,HPN-ICF-IF-EXT-MIB::hpnicfIfLinkModeEntry,,not-accessible,hpnicfIfLinkModeIndex,current,,The interface link mode table entry
.1.3.6.1.4.1.11.2.14.11.15.2.40.2.2.3.1.1,HPN-ICF-IF-EXT-MIB::hpnicfIfLinkModeIndex,Integer32,not-accessible,,current,,The value is same as ifIndex.
.1.3.6.1.4.1.11.2.14.11.15.2.40.2.2.3.1.2,HPN-ICF-IF-EXT-MIB::hpnicfIfLinkMode,INTEGER,read-write,,current,bridgeMode(1):routeMode(2),The current link mode of the interface If hpnicfIfLinkModeSwitchSupport is true, writing to the object can change the link mode of the interface.
.1.3.6.1.4.1.11.2.14.11.15.2.40.2.2.3.1.3,HPN-ICF-IF-EXT-MIB::hpnicfIfLinkModeSwitchSupport,INTEGER,read-only,,current,true(1):false(2),Whether the interface supports link mode switching. If this object is true, the interface can operate in either bridge mode or route mode. Otherwise the interfaces can operate only in bridge or route mode.
.1.3.6.1.4.1.11.2.14.11.15.2.40.2.3,HPN-ICF-IF-EXT-MIB::hpnicfIfInterfaces,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.2.40.2.3.1,HPN-ICF-IF-EXT-MIB::hpnicfIfPhysicalNumber,Integer32,read-only,,current,,Represents the number of physical interfaces in the device.
.1.3.6.1.4.1.11.2.14.11.15.2.40.2.3.2,HPN-ICF-IF-EXT-MIB::hpnicfIfTable,,not-accessible,,current,,A list of interface entries. The number of entries is given by the value of IfNumber.
.1.3.6.1.4.1.11.2.14.11.15.2.40.2.3.2.1,HPN-ICF-IF-EXT-MIB::hpnicfIfEntry,,not-accessible,ifIndex,current,,An entry containing management information applicable to a particular interface.
.1.3.6.1.4.1.11.2.14.11.15.2.40.2.3.2.1.1,HPN-ICF-IF-EXT-MIB::hpnicfIfUpDownTimes,Integer32,read-only,,current,,The interface's up/down times, since the device was initialized.
.1.3.6.1.4.1.11.2.14.11.15.2.40.2.3.2.1.2,HPN-ICF-IF-EXT-MIB::hpnicfIfMtu,Integer32,read-write,,current,,The size of the largest datagram which can be sent/received on the interface, specified in octets. For interfaces that are used for transmitting network datagram, this is the size of the largest network datagram that can be sent on the interface.
.1.3.6.1.4.1.11.2.14.11.15.2.40.2.3.2.1.3,HPN-ICF-IF-EXT-MIB::hpnicfIfBandwidthRate,Integer32,read-only,,current,,The rate of the bandwidth for an interface.
.1.3.6.1.4.1.11.2.14.11.15.2.40.2.3.2.1.4,HPN-ICF-IF-EXT-MIB::hpnicfIfDiscardPktRate,Integer32,read-only,,current,,The rate of the discarded packets for an interface.
.1.3.6.1.4.1.11.2.14.11.15.2.40.2.3.2.1.5,HPN-ICF-IF-EXT-MIB::hpnicfIfStatusKeepTime,TimeTicks,read-only,,current,,The time since the interface entered its current operational state.
.1.3.6.1.4.1.11.2.14.11.15.2.40.2.3.2.1.6,HPN-ICF-IF-EXT-MIB::hpnicfIfInNUcastPkts,Counter64,read-only,,current,,The number of non-unicast (i.e., subnetwork- broadcast or subnetwork-multicast) packets delivered to a higher-layer protocol.
.1.3.6.1.4.1.11.2.14.11.15.2.40.2.3.2.1.7,HPN-ICF-IF-EXT-MIB::hpnicfIfOutNUcastPkts,Counter64,read-only,,current,,The total number of packets that higher-level protocols requested be transmitted to a non- unicast (i.e., a subnetwork-broadcast or subnetwork-multicast) address.
.1.3.6.1.4.1.11.2.14.11.15.2.40.2.3.2.1.8,HPN-ICF-IF-EXT-MIB::hpnicfIfIsPoe,INTEGER,read-only,,current,true(1):false(2),Whether the interface supports poe.
.1.3.6.1.4.1.11.2.14.11.15.2.40.2.3.2.1.9,HPN-ICF-IF-EXT-MIB::hpnicfIfOperStatus,INTEGER,read-only,,current,up(1):down(2):testing(3):admindown(4),Current status of the interface. In testing state, no operational packets can be forwarded. If ifAdminStatus is down, hpnicfIfOperStatus should be admindown. If ifAdminStatus is changed to up, hpnicfIfOperStatus should change to up if the interface is ready to send and receive network traffic; otherwise, it should stay in down state.
.1.3.6.1.4.1.11.2.14.11.15.2.40.2.3.2.1.10,HPN-ICF-IF-EXT-MIB::hpnicfIfDownTimes,Integer32,read-only,,current,,Number of times the interface went down, since the device was initialized.
.1.3.6.1.4.1.11.2.14.11.15.2.40.3,HPN-ICF-IF-EXT-MIB::hpnicfIfExtTrap,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.2.40.3.0,HPN-ICF-IF-EXT-MIB::hpnicfIfExtTrapPrex,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.2.40.3.0.1,HPN-ICF-IF-EXT-MIB::hpnicfIfBandwidthUsageHigh,,,,,,The notification is generated when the rate of the bandwidth for the interface exceeds the upper limit.
.1.3.6.1.4.1.11.2.14.11.15.2.40.3.0.2,HPN-ICF-IF-EXT-MIB::hpnicfIfDiscardPktRateHigh,,,,,,The notification is generated when the rate of the discarded packets for the interface exceeds the upper limit.
.1.3.6.1.4.1.11.2.14.11.15.2.40.3.1,HPN-ICF-IF-EXT-MIB::hpnicfIfExtTrapObject,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.2.40.3.1.1,HPN-ICF-IF-EXT-MIB::hpnicfIfExtTrapCfgTable,,not-accessible,,current,,The trap configuration table.
.1.3.6.1.4.1.11.2.14.11.15.2.40.3.1.1.1,HPN-ICF-IF-EXT-MIB::hpnicfIfExtTrapCfgEntry,,not-accessible,ifIndex,current,,An entry for this table.
.1.3.6.1.4.1.11.2.14.11.15.2.40.3.1.1.1.1,HPN-ICF-IF-EXT-MIB::hpnicfIfBandwidthUpperLimit,Integer32,read-write,,current,,The rate of the bandwidth upper limit for an interface.
.1.3.6.1.4.1.11.2.14.11.15.2.40.3.1.1.1.2,HPN-ICF-IF-EXT-MIB::hpnicfIfDiscardPktRateUpperLimit,Integer32,read-write,,current,,The rate of the discarded packets upper limit for an interface.
.1.3.6.1.4.1.11.2.14.11.15.2.41,HPN-ICF-OID-MIB::hpnicfCfCard,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.2.41.1,HPN-ICF-CFCARD-MIB::hpnicfCfCardMIB,,,,,,This MIB provides the information about CF Card.
.1.3.6.1.4.1.11.2.14.11.15.2.41.1.1,HPN-ICF-CFCARD-MIB::hpnicfCfCardMIBObjects,,,,,,Objects used for CF Card management.
.1.3.6.1.4.1.11.2.14.11.15.2.41.1.1.1,HPN-ICF-CFCARD-MIB::hpnicfCfCardScalarObjects,,,,,,The scalar objects for the CF Card(s).
.1.3.6.1.4.1.11.2.14.11.15.2.41.1.1.1.1,HPN-ICF-CFCARD-MIB::hpnicfCfCardNumber,INTEGER,read-only,,current,,The total number of the CF Card(s) at present.
.1.3.6.1.4.1.11.2.14.11.15.2.41.1.1.2,HPN-ICF-CFCARD-MIB::hpnicfCfCardInfoObjects,,,,,,The basic information about CF Card(s).
.1.3.6.1.4.1.11.2.14.11.15.2.41.1.1.2.2,HPN-ICF-CFCARD-MIB::hpnicfCfCardInfoTable,,not-accessible,,current,,This table contains the basic information about CF Card(s).
.1.3.6.1.4.1.11.2.14.11.15.2.41.1.1.2.2.1,HPN-ICF-CFCARD-MIB::hpnicfCfCardInfoEntry,,not-accessible,hpnicfCfCardIndex,current,,This list contains the basic information about CF Card.
.1.3.6.1.4.1.11.2.14.11.15.2.41.1.1.2.2.1.1,HPN-ICF-CFCARD-MIB::hpnicfCfCardIndex,INTEGER,read-only,,current,,The index of the table.
.1.3.6.1.4.1.11.2.14.11.15.2.41.1.1.2.2.1.2,HPN-ICF-CFCARD-MIB::hpnicfCfCardIsPresent,INTEGER,read-only,,current,yes(1):no(2),The value indicates whether the CF Card is present or not.
.1.3.6.1.4.1.11.2.14.11.15.2.41.1.1.2.2.1.3,HPN-ICF-CFCARD-MIB::hpnicfCfCardContainedIn,INTEGER,read-only,,current,,The number of the slot which containes this CF Card 
.1.3.6.1.4.1.11.2.14.11.15.2.41.1.1.2.2.1.4,HPN-ICF-CFCARD-MIB::hpnicfCfCardParentRelPos,INTEGER,read-only,,current,,An indication of the relative position of this CF Card among all the CF Card contained in the same slot.
.1.3.6.1.4.1.11.2.14.11.15.2.41.1.1.2.2.1.5,HPN-ICF-CFCARD-MIB::hpnicfCfCardDescription,OCTET,read-only,,current,,The Description of CF Card.
.1.3.6.1.4.1.11.2.14.11.15.2.41.1.1.2.2.1.6,HPN-ICF-CFCARD-MIB::hpnicfCfCardSerialNumber,OCTET,read-only,,current,,The serial number of CF Card.
.1.3.6.1.4.1.11.2.14.11.15.2.41.1.1.2.2.1.7,HPN-ICF-CFCARD-MIB::hpnicfCfCardFirewareVersion,OCTET,read-only,,current,,The firmware revision of CF Card.
.1.3.6.1.4.1.11.2.14.11.15.2.41.1.1.2.2.1.8,HPN-ICF-CFCARD-MIB::hpnicfCfCardModelNumber,OCTET,read-only,,current,,The model number containing infomation of manufacturer.
.1.3.6.1.4.1.11.2.14.11.15.2.41.1.1.2.2.1.9,HPN-ICF-CFCARD-MIB::hpnicfCfCardState,INTEGER,read-only,,current,sNoError(1):sFormatError(2):sSectorBufferError(3):sECCError(4):sCMPError(5):sSlaveError(128):sIOError(240):sOther(255),The state of CF Card.
.1.3.6.1.4.1.11.2.14.11.15.2.41.1.1.2.2.1.10,HPN-ICF-CFCARD-MIB::hpnicfCfCardSize,Unsigned32,read-only,,current,,The size of CF Card.
.1.3.6.1.4.1.11.2.14.11.15.2.41.1.1.2.2.1.11,HPN-ICF-CFCARD-MIB::hpnicfCfCardUsedSize,Unsigned32,read-only,,current,,The used size of CF Card.
.1.3.6.1.4.1.11.2.14.11.15.2.41.1.1.2.2.1.12,HPN-ICF-CFCARD-MIB::hpnicfCfCardFreeSize,Unsigned32,read-only,,current,,The free size of CF Card.
.1.3.6.1.4.1.11.2.14.11.15.2.41.1.2,HPN-ICF-CFCARD-MIB::hpnicfCfCardNotifications,,,,,,Notification about the CF Card.
.1.3.6.1.4.1.11.2.14.11.15.2.41.1.2.0,HPN-ICF-CFCARD-MIB::hpnicfCfCardNotificationsV2,,,,,,Root node for the Notification.
.1.3.6.1.4.1.11.2.14.11.15.2.41.1.2.0.1,HPN-ICF-CFCARD-MIB::hpnicfCfCardHotSwapOn,,,,,,This notification is sent when a CF Card is hot swapped in.
.1.3.6.1.4.1.11.2.14.11.15.2.41.1.2.0.2,HPN-ICF-CFCARD-MIB::hpnicfCfCardHotSwapOff,,,,,,This notification is sent when a CF Card is hot swapped out.
.1.3.6.1.4.1.11.2.14.11.15.2.41.1.4,HPN-ICF-CFCARD-MIB::hpnicfCfCardMIBConformance,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.2.41.1.4.1,HPN-ICF-CFCARD-MIB::hpnicfCfCardMIBGroups,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.2.41.1.4.1.1,HPN-ICF-CFCARD-MIB::hpnicfcurrentObjectGroup,,,,,,A collection of objects.
.1.3.6.1.4.1.11.2.14.11.15.2.41.1.4.1.2,HPN-ICF-CFCARD-MIB::hpnicfcurrentNotificationGroup,,,,,,Notification group.
.1.3.6.1.4.1.11.2.14.11.15.2.41.1.4.2,HPN-ICF-CFCARD-MIB::hpnicfCfCardMIBCompliances,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.2.41.1.4.2.1,HPN-ICF-CFCARD-MIB::hpnicfbasicCompliance,,,,,,The compliance statement.
.1.3.6.1.4.1.11.2.14.11.15.2.42,HPN-ICF-OID-MIB::hpnicfEpon,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.2.42.1,HPN-ICF-EPON-MIB::hpnicfEponMibObjects,,,,,, The objects in this MIB module are used to manage and display current configuration of Ethernet Passive Optical Network (EPON) port which are based on the Ethernet in the First Mile (EFM) Passive Optical Network(PON) as defined in IEEE Draft P802.3ah/D3.0 clause 60, 64, 65.. 
.1.3.6.1.4.1.11.2.14.11.15.2.42.1.1,HPN-ICF-EPON-MIB::hpnicfEponSysMan,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.2.42.1.1.1,HPN-ICF-EPON-MIB::hpnicfEponAutoAuthorize,INTEGER,read-write,,current,true(1):false(2), This value determines whether software performs self-authorization for each Optical Network Unit(ONU) registering to the network. Setting it to false means for every ONU registering, software requires external authorization, and until it's done the ONU is not authenticated. True value means software authorizes each ONU registering to the network automatically. true - ONUs are always authorized. false - If 802.1x authorization is enable, the ONUs have to be authorized by the protocol. - If 802.1x authorization is disable, ONUs are always authorized. 
.1.3.6.1.4.1.11.2.14.11.15.2.42.1.1.2,HPN-ICF-EPON-MIB::hpnicfEponMonitorCycle,Integer32,read-write,,current,, The cycle of alarm thresholds checking. Applying to the following types: Bit Error Rate(BER) alarm, Frame Error Rate(FER), Logical Link Identity(LLID) mismatch alarm and so on. The unit is second. 
.1.3.6.1.4.1.11.2.14.11.15.2.42.1.1.3,HPN-ICF-EPON-MIB::hpnicfEponMsgTimeOut,Integer32,read-write,,current,, Timeout waiting for a response from Optical Line Terminal(OLT) firmware after sending it a message. The unit is millisecond. 
.1.3.6.1.4.1.11.2.14.11.15.2.42.1.1.4,HPN-ICF-EPON-MIB::hpnicfEponMsgLoseNum,Integer32,read-write,,current,, The times of messages sending timeouts, after which OLT will reset (applying to every OLT). 
.1.3.6.1.4.1.11.2.14.11.15.2.42.1.1.5,HPN-ICF-EPON-MIB::hpnicfEponSysHasEPONBoard,INTEGER,read-only,,current,true(1):false(2), true(1) - At least an EPON board exists. false(2) - No EPON board exists. 
.1.3.6.1.4.1.11.2.14.11.15.2.42.1.1.6,HPN-ICF-EPON-MIB::hpnicfEponMonitorCycleEnable,INTEGER,read-write,,current,true(1):false(2), Stop or continue monitoring. true(1) - Continue monitoring. false(2) - Stop monitoring. 
.1.3.6.1.4.1.11.2.14.11.15.2.42.1.1.7,HPN-ICF-EPON-MIB::hpnicfEponOltSoftwareErrAlmEnable,INTEGER,read-write,,current,true(1):false(2), Software error alarm behavior of all active OLTs. true(1) - alarm enable. false(2) - alarm disable. 
.1.3.6.1.4.1.11.2.14.11.15.2.42.1.1.8,HPN-ICF-EPON-MIB::hpnicfEponPortLoopBackAlmEnable,INTEGER,read-write,,current,true(1):false(2), LoopBack alarm behavior of EPON ports. true(1) - alarm enable. false(2) - alarm disable. 
.1.3.6.1.4.1.11.2.14.11.15.2.42.1.1.9,HPN-ICF-EPON-MIB::hpnicfEponMonitorCycleMinVal,Integer32,read-only,,current,, The lower limit of cycle which be confined to the hpnicfEponMonitorCycle. 
.1.3.6.1.4.1.11.2.14.11.15.2.42.1.1.10,HPN-ICF-EPON-MIB::hpnicfEponMonitorCycleMaxVal,Integer32,read-only,,current,, The upper limit of cycle which be confined to the hpnicfEponMonitorCycle. 
.1.3.6.1.4.1.11.2.14.11.15.2.42.1.1.11,HPN-ICF-EPON-MIB::hpnicfEponMsgTimeOutMinVal,Integer32,read-only,,current,, The lower limit of timeout which be confined to the hpnicfEponMsgTimeOut. 
.1.3.6.1.4.1.11.2.14.11.15.2.42.1.1.12,HPN-ICF-EPON-MIB::hpnicfEponMsgTimeOutMaxVal,Integer32,read-only,,current,, The upper limit of timeout which be confined to the hpnicfEponMsgTimeOut. 
.1.3.6.1.4.1.11.2.14.11.15.2.42.1.1.13,HPN-ICF-EPON-MIB::hpnicfEponMsgLoseNumMinVal,Integer32,read-only,,current,, The lower limit of time which be confined to the hpnicfEponMsgLoseNum. 
.1.3.6.1.4.1.11.2.14.11.15.2.42.1.1.14,HPN-ICF-EPON-MIB::hpnicfEponMsgLoseNumMaxVal,Integer32,read-only,,current,, The upper limit of time which be confined to the hpnicfEponMsgLoseNum. 
.1.3.6.1.4.1.11.2.14.11.15.2.42.1.1.15,HPN-ICF-EPON-MIB::hpnicfEponSysScalarGroup,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.2.42.1.1.16,HPN-ICF-EPON-MIB::hpnicfEponSysManTable,,not-accessible,,current,, This table defines system related parameters. 
.1.3.6.1.4.1.11.2.14.11.15.2.42.1.1.16.1,HPN-ICF-EPON-MIB::hpnicfEponSysManEntry,,not-accessible,hpnicfEponSlotIndex,current,, The entry of the table hpnicfEponSysManTable. 
.1.3.6.1.4.1.11.2.14.11.15.2.42.1.1.16.1.1,HPN-ICF-EPON-MIB::hpnicfEponSlotIndex,Integer32,not-accessible,,current,, Slot Index, the index of hpnicfEponSysManTable. 
.1.3.6.1.4.1.11.2.14.11.15.2.42.1.1.16.1.2,HPN-ICF-EPON-MIB::hpnicfEponModeSwitch,INTEGER,read-write,,current,cmode(1):hmode(2), cmode - epon standard mode. hmode - private mode. 
.1.3.6.1.4.1.11.2.14.11.15.2.42.1.1.16.1.3,HPN-ICF-EPON-MIB::hpnicfEponAutomaticMode,INTEGER,read-write,,current,enable(1):disable(2), Automatic mode setting: when enabled - after new OLT is added, the OLT stack sets its encryption mode to 'triple churning' and configure the OLT to authorize ONU MAC addresses according to its table. enable -enable automatic mode. disable -disable automatic mode. 
.1.3.6.1.4.1.11.2.14.11.15.2.42.1.1.16.1.4,HPN-ICF-EPON-MIB::hpnicfEponOamDiscoveryTimeout,Integer32,read-write,,current,, Time out parameter for extended OAM discovery process message, ranging from 0 to 2550, measured in 100 milliseconds. 
.1.3.6.1.4.1.11.2.14.11.15.2.42.1.1.16.1.5,HPN-ICF-EPON-MIB::hpnicfEponEncryptionNoReplyTimeOut,Integer32,read-write,,current,, Encryption response timeout, ranging from 1 to 2550, measured in 100 milliseconds. 
.1.3.6.1.4.1.11.2.14.11.15.2.42.1.1.16.1.6,HPN-ICF-EPON-MIB::hpnicfEponEncryptionUpdateTime,Integer32,read-write,,current,, Encryption key update timer for all ONUs on slot, indicated by hpnicfEponSlotIndex, ranging from 1 to 255, measured in seconds. 
.1.3.6.1.4.1.11.2.14.11.15.2.42.1.1.16.1.7,HPN-ICF-EPON-MIB::hpnicfEponAutoBindStatus,INTEGER,read-write,,current,enable(1):disable(2), enable - auto bind ONU ID when the ONU registered in the EPON system. disable - need manual bind ONU ID when the ONU registered in the EPON system. 
.1.3.6.1.4.1.11.2.14.11.15.2.42.1.1.17,HPN-ICF-EPON-MIB::hpnicfEponAutoUpdateTable,,not-accessible,,current,, EPON auto update ONU application configuration. 
.1.3.6.1.4.1.11.2.14.11.15.2.42.1.1.17.1,HPN-ICF-EPON-MIB::hpnicfEponAutoUpdateEntry,,not-accessible,hpnicfEponSlotIndex,current,, The entry of the table hpnicfEponAutoUpdateTable. 
.1.3.6.1.4.1.11.2.14.11.15.2.42.1.1.17.1.1,HPN-ICF-EPON-MIB::hpnicfEponAutoUpdateFileName,OCTET,read-write,,current,, The name of ONU application file, the file name must be valid and include the path. It is a zero length string by default. 
.1.3.6.1.4.1.11.2.14.11.15.2.42.1.1.17.1.2,HPN-ICF-EPON-MIB::hpnicfEponAutoUpdateSchedStatus,INTEGER,read-write,,current,enable(1):disable(2), The status of schedule update configuration. The hpnicfEponAutoUpdateFileName must be set before enable hpnicfEponAutoUpdateSchedStatus. enable - enable ONU schedule update. disable - disable ONU schedule update. 
.1.3.6.1.4.1.11.2.14.11.15.2.42.1.1.17.1.3,HPN-ICF-EPON-MIB::hpnicfEponAutoUpdateSchedTime,OCTET,read-write,,current,, The schedule update timing configuration is related to the hpnicfEponAutoUpdateSchedType. auto update daily: the string format is hhmm auto update weekly: the string format is hhmmw 'w' means update weekly, it ranges from 0 to 6: 0 - Sunday. 1 - Monday. 2 - Tuesday. 3 - Wednesday. 4 - Thursday. 5 - Friday. 6 - Saturday. auto update in coming date : the string format is hhmmyyyymmdd. The configuration will take effect only if hpnicfEponAutoUpdateSchedStatus is enabled. 
.1.3.6.1.4.1.11.2.14.11.15.2.42.1.1.17.1.4,HPN-ICF-EPON-MIB::hpnicfEponAutoUpdateSchedType,INTEGER,read-write,,current,daily(1):weekly(2):comingdate(3), The update type of auto updating configuration. daily - update ONU application every day. weekly - update ONU application every week. comingdate - update ONU application on coming date. 
.1.3.6.1.4.1.11.2.14.11.15.2.42.1.1.17.1.5,HPN-ICF-EPON-MIB::hpnicfEponAutoUpdateRealTimeStatus,INTEGER,read-write,,current,enable(1):disable(2), The status of real time update configuration. The hpnicfEponAutoUpdateFileName must be set before enable hpnicfEponAutoUpdateRealTimeStatus. enable - enable ONU real time update. disable - disable ONU real time update. 
.1.3.6.1.4.1.11.2.14.11.15.2.42.1.1.18,HPN-ICF-EPON-MIB::hpnicfEponOuiIndexNextTable,,not-accessible,,current,, Next OUI index table. 
.1.3.6.1.4.1.11.2.14.11.15.2.42.1.1.18.1,HPN-ICF-EPON-MIB::hpnicfEponOuiIndexNextEntry,,not-accessible,hpnicfEponSlotIndex,current,, The entry of the table hpnicfEponOuiIndexNextTable. 
.1.3.6.1.4.1.11.2.14.11.15.2.42.1.1.18.1.1,HPN-ICF-EPON-MIB::hpnicfEponOuiIndexNext,Integer32,read-only,,current,, This object contains an appropriate value to be used for hpnicfEponOuiIndex when creating rows in the hpnicfEponOuiTable. 
.1.3.6.1.4.1.11.2.14.11.15.2.42.1.1.19,HPN-ICF-EPON-MIB::hpnicfEponOuiTable,,not-accessible,,current,, List of OUI and OAM supported by OLT. 
.1.3.6.1.4.1.11.2.14.11.15.2.42.1.1.19.1,HPN-ICF-EPON-MIB::hpnicfEponOuiEntry,,not-accessible,hpnicfEponSlotIndex:hpnicfEponOuiIndex,current,, The entry of the table hpnicfEponOuiTable. 
.1.3.6.1.4.1.11.2.14.11.15.2.42.1.1.19.1.1,HPN-ICF-EPON-MIB::hpnicfEponOuiIndex,Integer32,not-accessible,,current,, The index of this table. 
.1.3.6.1.4.1.11.2.14.11.15.2.42.1.1.19.1.2,HPN-ICF-EPON-MIB::hpnicfEponOuiValue,OCTET,read-create,,current,, OUI list supported by the extended OAM discovery process. The OUI is composed of six octets. The first six octets denote the first OUI , the second six octets denote the second OUI, and the like. 
.1.3.6.1.4.1.11.2.14.11.15.2.42.1.1.19.1.3,HPN-ICF-EPON-MIB::hpnicfEponOamVersion,OCTET,read-create,,current,, Version of OAM protocol defined by the organization denoted by OUI. 
.1.3.6.1.4.1.11.2.14.11.15.2.42.1.1.19.1.4,HPN-ICF-EPON-MIB::hpnicfEponOuiRowStatus,INTEGER,read-create,,current,active(1):notInService(2):notReady(3):createAndGo(4):createAndWait(5):destroy(6), The status of this table entry. Only active, createAndGo and the destory are supported. 
.1.3.6.1.4.1.11.2.14.11.15.2.42.1.1.20,HPN-ICF-EPON-MIB::hpnicfEponMulticastControlTable,,not-accessible,,current,, Multicast control global configuration. 
.1.3.6.1.4.1.11.2.14.11.15.2.42.1.1.20.1,HPN-ICF-EPON-MIB::hpnicfEponMulticastControlEntry,,not-accessible,hpnicfEponMulticastVlanId,current,, The entry of the table hpnicfEponMulticastControlTable. 
.1.3.6.1.4.1.11.2.14.11.15.2.42.1.1.20.1.1,HPN-ICF-EPON-MIB::hpnicfEponMulticastVlanId,Integer32,not-accessible,,current,, The index of this table. 
.1.3.6.1.4.1.11.2.14.11.15.2.42.1.1.20.1.2,HPN-ICF-EPON-MIB::hpnicfEponMulticastAddressList,OCTET,read-create,,current,, The multicast address, each four octets represents a multicast address, the address section ranging from the first four octets to the second four octets, and the like. 
.1.3.6.1.4.1.11.2.14.11.15.2.42.1.1.20.1.3,HPN-ICF-EPON-MIB::hpnicfEponMulticastStatus,INTEGER,read-create,,current,active(1):notInService(2):notReady(3):createAndGo(4):createAndWait(5):destroy(6), The status of this table entry. Only active, createAndGo and the destory are supported. 
.1.3.6.1.4.1.11.2.14.11.15.2.42.1.2,HPN-ICF-EPON-MIB::hpnicfEponFileName,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.2.42.1.2.1,HPN-ICF-EPON-MIB::hpnicfEponDbaUpdateFileName,OCTET,read-write,,current,, The name of a binary file which is loaded to the OLT from an external source. Note that the filename must contain the file path. 
.1.3.6.1.4.1.11.2.14.11.15.2.42.1.2.2,HPN-ICF-EPON-MIB::hpnicfEponOnuUpdateFileName,OCTET,read-write,,current,, The filename of the ONU firmware to be updated. Note that the filename must contain the file path. 
.1.3.6.1.4.1.11.2.14.11.15.2.42.1.3,HPN-ICF-EPON-MIB::hpnicfEponOltMan,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.2.42.1.3.1,HPN-ICF-EPON-MIB::hpnicfOltSysManTable,,not-accessible,,current,, This table defines several OLT system parameters: (1)laser on time (2)laser off time (3)whether multiple copy broadcast (4)whether discard packet (5)self test (6)self test result 
.1.3.6.1.4.1.11.2.14.11.15.2.42.1.3.1.1,HPN-ICF-EPON-MIB::hpnicfOltSysManEntry,,not-accessible,ifIndex,current,, The entry of the table hpnicfOltSysManTable. 
.1.3.6.1.4.1.11.2.14.11.15.2.42.1.3.1.1.1,HPN-ICF-EPON-MIB::hpnicfOltLaserOnTime,Integer32,read-write,,current,, The laser on time of the ONUs during the discovery process, measured in Time Quanta(TQ). 
.1.3.6.1.4.1.11.2.14.11.15.2.42.1.3.1.1.2,HPN-ICF-EPON-MIB::hpnicfOltLaserOffTime,Integer32,read-write,,current,, The laser off time of the ONUs during the discovery process, measured in TQ. 
.1.3.6.1.4.1.11.2.14.11.15.2.42.1.3.1.1.3,HPN-ICF-EPON-MIB::hpnicfOltMultiCopyBrdCast,INTEGER,read-write,,current,true(1):false(2), true/false filtering of tagged multicast frames. The software avert tagged downstream frames with multicast or broadcast DA to the PON and not to the CPU, except for special multicast frames (link-constraint, IGMP control and ARP) that are passed to the CPU regardless of this feature. 
.1.3.6.1.4.1.11.2.14.11.15.2.42.1.3.1.1.4,HPN-ICF-EPON-MIB::hpnicfOltEnableDiscardPacket,INTEGER,read-write,,current,true(1):false(2), Forward(false)/discard(true) any frames received from unlearned source address when the inside address table of the original ONU entry reach to the limit. 
.1.3.6.1.4.1.11.2.14.11.15.2.42.1.3.1.1.5,HPN-ICF-EPON-MIB::hpnicfOltSelfTest,INTEGER,read-write,,current,selftest(1), selftest(1): Test OLT to check whether it's OK. 
.1.3.6.1.4.1.11.2.14.11.15.2.42.1.3.1.1.6,HPN-ICF-EPON-MIB::hpnicfOltSelfTestResult,INTEGER,read-only,,current,other(1):ok(2):fail(3), The self test result of the specific OLT. other(1): The self test result is another reason. ok(2): The self test result is OK. fail(3): The self test result is fail. 
.1.3.6.1.4.1.11.2.14.11.15.2.42.1.3.1.1.7,HPN-ICF-EPON-MIB::hpnicfOltMaxRtt,Unsigned32,read-write,,current,, Set the max Round Trip Time of this OLT. 
.1.3.6.1.4.1.11.2.14.11.15.2.42.1.3.2,HPN-ICF-EPON-MIB::hpnicfOltInfoTable,,not-accessible,,current,, Primary status of the specified OLT. There will be one row in this table for each information in the system. (1)Software and hardware versions of the specified OLT (hpnicfOltFirmMajorVersion, hpnicfOltFirmMinorVersion, hpnicfOltHardMajorVersion, hpnicfOltHardMinorVersion) (2)Several physical capabilities of an OLT device. (hpnicfOltAgcLockTime, hpnicfOltAgcCdrTime) (3)The operation(activation) status of an OLT. (hpnicfOltMacAddress, hpnicfOltWorkMode) 
.1.3.6.1.4.1.11.2.14.11.15.2.42.1.3.2.1,HPN-ICF-EPON-MIB::hpnicfOltInfoEntry,,not-accessible,ifIndex,current,, The entry of the table hpnicfOltInfoTable. 
.1.3.6.1.4.1.11.2.14.11.15.2.42.1.3.2.1.1,HPN-ICF-EPON-MIB::hpnicfOltFirmMajorVersion,OCTET,read-only,,current,, OLT firmware major version. If the object length is zero, it means the version is unknown. 
.1.3.6.1.4.1.11.2.14.11.15.2.42.1.3.2.1.2,HPN-ICF-EPON-MIB::hpnicfOltFirmMinorVersion,OCTET,read-only,,current,, OLT firmware minor version. If the object length is zero, it means the version is unknown. 
.1.3.6.1.4.1.11.2.14.11.15.2.42.1.3.2.1.3,HPN-ICF-EPON-MIB::hpnicfOltHardMajorVersion,OCTET,read-only,,current,, OLT hardware major version. If the object length is zero, it means the version is unknown. 
.1.3.6.1.4.1.11.2.14.11.15.2.42.1.3.2.1.4,HPN-ICF-EPON-MIB::hpnicfOltHardMinorVersion,OCTET,read-only,,current,, OLT hardware minor version. If the object length is zero, it means the version is unknown. 
.1.3.6.1.4.1.11.2.14.11.15.2.42.1.3.2.1.5,HPN-ICF-EPON-MIB::hpnicfOltAgcLockTime,Integer32,read-only,,current,, PON upstream data Automatic Gain Control(AGC) lock time, measured in TQ, range: 1 - 2^15. 0x7FFFFFFF: unknown value. 
.1.3.6.1.4.1.11.2.14.11.15.2.42.1.3.2.1.6,HPN-ICF-EPON-MIB::hpnicfOltAgcCdrTime,Integer32,read-only,,current,, PON RX signal synchronization time, measured in TQ, range: 1 - 2^15. 0x7FFFFFFF: unknown value 
.1.3.6.1.4.1.11.2.14.11.15.2.42.1.3.2.1.7,HPN-ICF-EPON-MIB::hpnicfOltMacAddress,OCTET,read-only,,current,, OLT MAC address. 
.1.3.6.1.4.1.11.2.14.11.15.2.42.1.3.2.1.8,HPN-ICF-EPON-MIB::hpnicfOltWorkMode,INTEGER,read-only,,current,other(1):open(2):reset(3):closed(4), The operation(activation) modes of an OLT. other(1) - The OLT is in another mode. open(2) - The OLT is open. reset(3) - The OLT is reset. closed(4) - The OLT is closed. 
.1.3.6.1.4.1.11.2.14.11.15.2.42.1.3.2.1.9,HPN-ICF-EPON-MIB::hpnicfOltOpticalPowerTx,Integer32,read-only,,current,, The optical power transmitted by this OLT. It measured in 0.01 dBm unit. 
.1.3.6.1.4.1.11.2.14.11.15.2.42.1.3.2.1.10,HPN-ICF-EPON-MIB::hpnicfOltOpticalPowerRx,Integer32,read-only,,current,, The burst optical power received by this OLT. It measured in 0.01 dBm unit. 
.1.3.6.1.4.1.11.2.14.11.15.2.42.1.3.3,HPN-ICF-EPON-MIB::hpnicfOltDbaManTable,,not-accessible,,current,, This table defines the primary parameters of the Dynamic Bandwidth Allocation(DBA) algorithm applying to the OLT. 
.1.3.6.1.4.1.11.2.14.11.15.2.42.1.3.3.1,HPN-ICF-EPON-MIB::hpnicfOltDbaManEntry,,not-accessible,ifIndex,current,, The entry of the table hpnicfOltDbaManTable. 
.1.3.6.1.4.1.11.2.14.11.15.2.42.1.3.3.1.1,HPN-ICF-EPON-MIB::hpnicfOltDbaEnabledType,INTEGER,read-write,,current,internal(1):external(2), Enable different types of the DBA algorithm. Start upstream dynamic bandwidth allocation algorithm, replacing former bandwidth allocation mechanism. internal(1) - OLT internal Service Level Agreement(SLA) based algorithm, always being activated. external(2) - DBA algorithm in a binary file which is loaded to the OLT from an external source. 
.1.3.6.1.4.1.11.2.14.11.15.2.42.1.3.3.1.2,HPN-ICF-EPON-MIB::hpnicfOltDbaDiscoveryLength,Integer32,read-write,,current,, Discovery length in TQ units. 
.1.3.6.1.4.1.11.2.14.11.15.2.42.1.3.3.1.3,HPN-ICF-EPON-MIB::hpnicfOltDbaDiscovryFrequency,Integer32,read-write,,current,, How often should the OLT send discovery frames to the ONUs, measured in grant cycles. 
.1.3.6.1.4.1.11.2.14.11.15.2.42.1.3.3.1.4,HPN-ICF-EPON-MIB::hpnicfOltDbaCycleLength,Integer32,read-write,,current,, The grant cycle length in TQ units. 
.1.3.6.1.4.1.11.2.14.11.15.2.42.1.3.3.1.5,HPN-ICF-EPON-MIB::hpnicfOltDbaVersion,OCTET,read-only,,current,, DBA version of the OLT. 
.1.3.6.1.4.1.11.2.14.11.15.2.42.1.3.3.1.6,HPN-ICF-EPON-MIB::hpnicfOltDbaUpdate,INTEGER,read-write,,current,update(1), Update(1): Update the DBA algorithm with a binary file which is loaded to the OLT from an external source(flash). Config the MIB object module hpnicfEponDbaUpdateFileName. 
.1.3.6.1.4.1.11.2.14.11.15.2.42.1.3.3.1.7,HPN-ICF-EPON-MIB::hpnicfOltDbaUpdateResult,INTEGER,read-only,,current,other(1):ok(2):fail(3):fileNotExist(4):notSetFilename(5), The latest DBA update result. other: The DBA update result is another reason. ok: The DBA update result is OK. fail: The DBA update result is fail. fileNotExist: The DBA update failed because the file does not exist. notSetFilename: The DBA filename is not set. 
.1.3.6.1.4.1.11.2.14.11.15.2.42.1.3.4,HPN-ICF-EPON-MIB::hpnicfOltPortAlarmThresholdTable,,not-accessible,,current,, The table defines the alarm threshold of OLT. 
.1.3.6.1.4.1.11.2.14.11.15.2.42.1.3.4.1,HPN-ICF-EPON-MIB::hpnicfOltPortAlarmThresholdEntry,,not-accessible,ifIndex,current,, The entry of the table hpnicfOltPortAlarmThresholdTable. 
.1.3.6.1.4.1.11.2.14.11.15.2.42.1.3.4.1.1,HPN-ICF-EPON-MIB::hpnicfOltPortAlarmBerEnabled,INTEGER,read-write,,current,true(1):false(2), Behavior of BER alarm. true(1) - alarm enable. false(2) - alarm disable. 
.1.3.6.1.4.1.11.2.14.11.15.2.42.1.3.4.1.2,HPN-ICF-EPON-MIB::hpnicfOltPortAlarmBerDirect,INTEGER,read-write,,current,berUplink(1):berDownlink(2):berAll(3), Traffic direction to monitor for BER alarm. 
.1.3.6.1.4.1.11.2.14.11.15.2.42.1.3.4.1.3,HPN-ICF-EPON-MIB::hpnicfOltPortAlarmBerThreshold,Integer32,read-write,,current,, BER threshold exceed which the alarm is raised. 
.1.3.6.1.4.1.11.2.14.11.15.2.42.1.3.4.1.4,HPN-ICF-EPON-MIB::hpnicfOltPortAlarmFerEnabled,INTEGER,read-write,,current,true(1):false(2), Behavior of FER alarm. true(1) - alarm enable. false(2) - alarm disable. 
.1.3.6.1.4.1.11.2.14.11.15.2.42.1.3.4.1.5,HPN-ICF-EPON-MIB::hpnicfOltPortAlarmFerDirect,INTEGER,read-write,,current,ferUplink(1):ferDownlink(2):ferAll(3), Traffic direction to monitor for FER alarm. 
.1.3.6.1.4.1.11.2.14.11.15.2.42.1.3.4.1.6,HPN-ICF-EPON-MIB::hpnicfOltPortAlarmFerThreshold,Integer32,read-write,,current,, Frame error rate exceed threshold then the alarm is raised. 
.1.3.6.1.4.1.11.2.14.11.15.2.42.1.3.4.1.7,HPN-ICF-EPON-MIB::hpnicfOltPortAlarmLlidMismatchEnabled,INTEGER,read-write,,current,true(1):false(2), Behavior of LLID mismatch alarm. true(1) - alarm enable. false(2) - alarm disable. 
.1.3.6.1.4.1.11.2.14.11.15.2.42.1.3.4.1.8,HPN-ICF-EPON-MIB::hpnicfOltPortAlarmLlidMismatchThreshold,Integer32,read-write,,current,, The minimal number of mismatched frames exceed threshold then LLID mismatch alarm is raised. 
.1.3.6.1.4.1.11.2.14.11.15.2.42.1.3.4.1.9,HPN-ICF-EPON-MIB::hpnicfOltPortAlarmRemoteStableEnabled,INTEGER,read-write,,current,true(1):false(2), Behavior of remote stable alarm. true(1) - alarm enable. false(2) - alarm disable. 
.1.3.6.1.4.1.11.2.14.11.15.2.42.1.3.4.1.10,HPN-ICF-EPON-MIB::hpnicfOltPortAlarmLocalStableEnabled,INTEGER,read-write,,current,true(1):false(2), Behavior of local stable alarm. true(1) - alarm enable. false(2) - alarm disable. 
.1.3.6.1.4.1.11.2.14.11.15.2.42.1.3.4.1.11,HPN-ICF-EPON-MIB::hpnicfOltPortAlarmRegistrationEnabled,INTEGER,read-write,,current,true(1):false(2), Behavior of registration alarm. true(1) - alarm enable. false(2) - alarm disable. 
.1.3.6.1.4.1.11.2.14.11.15.2.42.1.3.4.1.12,HPN-ICF-EPON-MIB::hpnicfOltPortAlarmOamDisconnectionEnabled,INTEGER,read-write,,current,true(1):false(2), Behavior of Operations Administration and Maintenance(OAM) disconnection alarm. true(1) - alarm enable. false(2) - alarm disable. 
.1.3.6.1.4.1.11.2.14.11.15.2.42.1.3.4.1.13,HPN-ICF-EPON-MIB::hpnicfOltPortAlarmEncryptionKeyEnabled,INTEGER,read-write,,current,true(1):false(2), Behavior of encryption bad key alarm. true(1) - alarm enable. false(2) - alarm disable. 
.1.3.6.1.4.1.11.2.14.11.15.2.42.1.3.4.1.14,HPN-ICF-EPON-MIB::hpnicfOltPortAlarmVendorSpecificEnabled,INTEGER,read-write,,current,true(1):false(2), Behavior of vendor specific alarm. true(1) - alarm enable. false(2) - alarm disable. 
.1.3.6.1.4.1.11.2.14.11.15.2.42.1.3.4.1.15,HPN-ICF-EPON-MIB::hpnicfOltPortAlarmRegExcessEnabled,INTEGER,read-write,,current,true(1):false(2), Behavior of ONU registering over limitation alarm. true(1) - alarm enable. false(2) - alarm disable. 
.1.3.6.1.4.1.11.2.14.11.15.2.42.1.3.4.1.16,HPN-ICF-EPON-MIB::hpnicfOltPortAlarmDFEEnabled,INTEGER,read-write,,current,true(1):false(2), Behavior of device fatal error alarm. true - alarm enable. false - alarm disable. 
.1.3.6.1.4.1.11.2.14.11.15.2.42.1.3.5,HPN-ICF-EPON-MIB::hpnicfOltLaserOnTimeMinVal,Integer32,read-only,,current,, The lower limit of time which is confined to hpnicfOltLaserOnTime. 
.1.3.6.1.4.1.11.2.14.11.15.2.42.1.3.6,HPN-ICF-EPON-MIB::hpnicfOltLaserOnTimeMaxVal,Integer32,read-only,,current,, The upper limit of time which is confined to hpnicfOltLaserOnTime. 
.1.3.6.1.4.1.11.2.14.11.15.2.42.1.3.7,HPN-ICF-EPON-MIB::hpnicfOltLaserOffTimeMinVal,Integer32,read-only,,current,, The lower limit of time which is confined to hpnicfOltLaserOffTime. 
.1.3.6.1.4.1.11.2.14.11.15.2.42.1.3.8,HPN-ICF-EPON-MIB::hpnicfOltLaserOffTimeMaxVal,Integer32,read-only,,current,, The upper limit of time which is confined to hpnicfOltLaserOffTime. 
.1.3.6.1.4.1.11.2.14.11.15.2.42.1.3.9,HPN-ICF-EPON-MIB::hpnicfOltDbaDiscoveryLengthMinVal,Integer32,read-only,,current,, The lower limit of the discovery length which is confined to hpnicfOltDbaDiscoveryLength. 
.1.3.6.1.4.1.11.2.14.11.15.2.42.1.3.10,HPN-ICF-EPON-MIB::hpnicfOltDbaDiscoveryLengthMaxVal,Integer32,read-only,,current,, The upper limit of the discovery length which is confined to hpnicfOltDbaDiscoveryLength. 
.1.3.6.1.4.1.11.2.14.11.15.2.42.1.3.11,HPN-ICF-EPON-MIB::hpnicfOltDbaDiscovryFrequencyMinVal,Integer32,read-only,,current,, The lower limit of the discovery length which is confined to hpnicfOltDbaDiscovryFrequency. 
.1.3.6.1.4.1.11.2.14.11.15.2.42.1.3.12,HPN-ICF-EPON-MIB::hpnicfOltDbaDiscovryFrequencyMaxVal,Integer32,read-only,,current,, The upper limit of the discovery length which is confined to hpnicfOltDbaDiscovryFrequency. 
.1.3.6.1.4.1.11.2.14.11.15.2.42.1.3.13,HPN-ICF-EPON-MIB::hpnicfOltDbaCycleLengthMinVal,Integer32,read-only,,current,, The lower limit of the frames which is confined to hpnicfOltDbaCycleLength. 
.1.3.6.1.4.1.11.2.14.11.15.2.42.1.3.14,HPN-ICF-EPON-MIB::hpnicfOltDbaCycleLengthMaxVal,Integer32,read-only,,current,, The upper limit of the frames which is confined to hpnicfOltDbaCycleLength. 
.1.3.6.1.4.1.11.2.14.11.15.2.42.1.3.15,HPN-ICF-EPON-MIB::hpnicfOltPortAlarmLlidMisMinVal,Integer32,read-only,,current,, The lower limit of the frames which is confined to hpnicfOltPortAlarmLlidMismatchThreshold. 
.1.3.6.1.4.1.11.2.14.11.15.2.42.1.3.16,HPN-ICF-EPON-MIB::hpnicfOltPortAlarmLlidMisMaxVal,Integer32,read-only,,current,, The upper limit of the frames which is confined to hpnicfOltPortAlarmLlidMismatchThreshold. 
.1.3.6.1.4.1.11.2.14.11.15.2.42.1.3.17,HPN-ICF-EPON-MIB::hpnicfOltPortAlarmBerMinVal,Integer32,read-only,,current,, The lower limit of threshold which is confined to hpnicfOltPortAlarmBerThreshold. 
.1.3.6.1.4.1.11.2.14.11.15.2.42.1.3.18,HPN-ICF-EPON-MIB::hpnicfOltPortAlarmBerMaxVal,Integer32,read-only,,current,, The upper limit of threshold which is confined to hpnicfOltPortAlarmBerThreshold. 
.1.3.6.1.4.1.11.2.14.11.15.2.42.1.3.19,HPN-ICF-EPON-MIB::hpnicfOltPortAlarmFerMinVal,Integer32,read-only,,current,, The lower limit of threshold which is confined to hpnicfOltPortAlarmFerThreshold. 
.1.3.6.1.4.1.11.2.14.11.15.2.42.1.3.20,HPN-ICF-EPON-MIB::hpnicfOltPortAlarmFerMaxVal,Integer32,read-only,,current,, The upper limit of threshold which is confined to hpnicfOltPortAlarmFerThreshold. 
.1.3.6.1.4.1.11.2.14.11.15.2.42.1.3.21,HPN-ICF-EPON-MIB::hpnicfOnuSilentTable,,not-accessible,,current,, This table is used for getting silent ONU information of OLT. 
.1.3.6.1.4.1.11.2.14.11.15.2.42.1.3.21.1,HPN-ICF-EPON-MIB::hpnicfOnuSilentEntry,,not-accessible,ifIndex:hpnicfOnuSilentMacAddr,current,, The entry of the table hpnicfOnuSilentTable. 
.1.3.6.1.4.1.11.2.14.11.15.2.42.1.3.21.1.1,HPN-ICF-EPON-MIB::hpnicfOnuSilentMacAddr,OCTET,not-accessible,,current,, The MAC address of silent ONUs in OLT. 
.1.3.6.1.4.1.11.2.14.11.15.2.42.1.3.21.1.2,HPN-ICF-EPON-MIB::hpnicfOnuSilentTime,Integer32,read-only,,current,, The aging time of a silent ONU. 
.1.3.6.1.4.1.11.2.14.11.15.2.42.1.3.22,HPN-ICF-EPON-MIB::hpnicfOltUsingOnuTable,,not-accessible,,current,, The table containing configurations to manage ONU interface(s) based on OLT interface. 
.1.3.6.1.4.1.11.2.14.11.15.2.42.1.3.22.1,HPN-ICF-EPON-MIB::hpnicfOltUsingOnuEntry,,not-accessible,ifIndex:hpnicfOltUsingOnuNum,current,, The entry of the table hpnicfOltUsingOnuTable. 
.1.3.6.1.4.1.11.2.14.11.15.2.42.1.3.22.1.1,HPN-ICF-EPON-MIB::hpnicfOltUsingOnuNum,Integer32,not-accessible,,current,, The ONU interface number. This value is used to specify the ONU interface which the user wants to configure for an OLT interface. 
.1.3.6.1.4.1.11.2.14.11.15.2.42.1.3.22.1.2,HPN-ICF-EPON-MIB::hpnicfOltUsingOnuIfIndex,Integer32,read-only,,current,, The ifIndex of the ONU interface. 
.1.3.6.1.4.1.11.2.14.11.15.2.42.1.3.22.1.3,HPN-ICF-EPON-MIB::hpnicfOltUsingOnuRowStatus,INTEGER,read-create,,current,active(1):notInService(2):notReady(3):createAndGo(4):createAndWait(5):destroy(6), This object is responsible for managing the creation, deletion and modification of rows, which supports active status and CreatAndGo, destroy operation. 
.1.3.6.1.4.1.11.2.14.11.15.2.42.1.5,HPN-ICF-EPON-MIB::hpnicfEponOnuMan,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.2.42.1.5.1,HPN-ICF-EPON-MIB::hpnicfOnuSysManTable,,not-accessible,,current,, This table implements the following functions for ONUs: 1. Encrypting all downstream/upstream and downstream directions traffic destined to and originated from a specific LLID (ONU in current implementation). 2. Restart a process of ONU authentication, using the OLT (IEEE 802.1x) authenticator. 
.1.3.6.1.4.1.11.2.14.11.15.2.42.1.5.1.1,HPN-ICF-EPON-MIB::hpnicfOnuSysManEntry,,not-accessible,ifIndex,current,, The entry of the table hpnicfOnuSysManTable. 
.1.3.6.1.4.1.11.2.14.11.15.2.42.1.5.1.1.1,HPN-ICF-EPON-MIB::hpnicfOnuEncryptMan,INTEGER,read-write,,current,off(1):downlink(2):updownlink(3), Start encrypting all downstream/upstream and downstream directions traffic destined to and originated from a specific LLID (ONU in current implementation). ONU registration encryption key is used as an initial value. If the encryption key was updated after ONU registration, the last updated key is used. off(1): - Stop encrypting. downlink(2): - Start encrypting all downstream directions traffic. updownlink(3): - Start encrypting all downstream/upstream directions traffic. 
.1.3.6.1.4.1.11.2.14.11.15.2.42.1.5.1.1.2,HPN-ICF-EPON-MIB::hpnicfOnuReAuthorize,INTEGER,read-write,,current,reAuthorize(1), Restart a process of ONU authentication. If 802.1x authentication is enabled, the OLT (IEEE 802.1x) authenticator is applied. Otherwise, use the default authentication. Until the reauthentication succeeds, the ONU remains its previous authorization mode. The reauthentication process includes a new authentication request sent to the authentication server. 
.1.3.6.1.4.1.11.2.14.11.15.2.42.1.5.1.1.3,HPN-ICF-EPON-MIB::hpnicfOnuMulticastFilterStatus,INTEGER,read-write,,current,true(1):false(2), true(1) - Multicast-Filter enable on ONU. false(2) - Multicast-Filter disable on ONU. 
.1.3.6.1.4.1.11.2.14.11.15.2.42.1.5.1.1.4,HPN-ICF-EPON-MIB::hpnicfOnuDbaReportQueueSetNumber,Integer32,read-write,,current,, The number of queue sets reported in MPCP report frames. 
.1.3.6.1.4.1.11.2.14.11.15.2.42.1.5.1.1.5,HPN-ICF-EPON-MIB::hpnicfOnuRemoteFecStatus,INTEGER,read-write,,current,enable(1):disable(2), Value that indicates status of the 1000BASE-PX PHY optional FEC Sublayer for forward error correction see [802.3ah] clause 65.2. enable - enable remote forward error correction. disable - disable remote forward error correction. 
.1.3.6.1.4.1.11.2.14.11.15.2.42.1.5.1.1.6,HPN-ICF-EPON-MIB::hpnicfOnuPortBerStatus,INTEGER,read-write,,current,enable(1):disable(2), enable - enable ONU port bit error rate alarm. disable - disable ONU port bit error rate alarm. 
.1.3.6.1.4.1.11.2.14.11.15.2.42.1.5.1.1.7,HPN-ICF-EPON-MIB::hpnicfOnuReset,INTEGER,read-write,,current,reset(1), Reboot ONU. 
.1.3.6.1.4.1.11.2.14.11.15.2.42.1.5.1.1.8,HPN-ICF-EPON-MIB::hpnicfOnuMulticastControlMode,INTEGER,read-write,,current,igmpsnooping(1):multicastcontrol(2), igmpsnooping - the traditional IGMP snooping mode. multicastcontrol - the specific multicast control mode. 
.1.3.6.1.4.1.11.2.14.11.15.2.42.1.5.1.1.9,HPN-ICF-EPON-MIB::hpnicfOnuAccessVlan,Integer32,read-write,,current,, The VLAN ID assigned to untagged frames received on ONU. 
.1.3.6.1.4.1.11.2.14.11.15.2.42.1.5.1.1.10,HPN-ICF-EPON-MIB::hpnicfOnuEncryptKey,OCTET,read-write,,current,, The encryption key, used to encrypt all downstream traffic destined to and/or upstream traffic originating from a specific ONU. It is a zero length, or MD5 hashed string, by default, the string is empty. 
.1.3.6.1.4.1.11.2.14.11.15.2.42.1.5.1.1.11,HPN-ICF-EPON-MIB::hpnicfOnuUniUpDownTrapStatus,INTEGER,read-write,,current,true(1):false(2), true - A notification will be sent when UNI link status is change. false - Device will not sent notification when UNI link status is change. 
.1.3.6.1.4.1.11.2.14.11.15.2.42.1.5.1.1.12,HPN-ICF-EPON-MIB::hpnicfOnuFecStatus,INTEGER,read-write,,current,enable(1):disable(2), Value that indicates status of the 1000BASE-PX PHY optional FEC Sublayer for forward error correction (include remote onu and local OLT) see [802.3ah] clause 65.2 enable - enable forward error correction. disable - disable forward error correction. 
.1.3.6.1.4.1.11.2.14.11.15.2.42.1.5.1.1.13,HPN-ICF-EPON-MIB::hpnicfOnuMcastCtrlHostAgingTime,Integer32,read-write,,current,, The host aging time of multicast control mode on ONU, ranging from 200 to 1000, measured in seconds. 
.1.3.6.1.4.1.11.2.14.11.15.2.42.1.5.1.1.14,HPN-ICF-EPON-MIB::hpnicfOnuMulticastFastLeaveEnable,INTEGER,read-write,,current,true(1):false(2), true(1) - Enable multicast fast leave attribute on all ethernet UNIs of the ONU. false(2) - Disable multicast fast leave attribute on all ethernet UNIs of the ONU. 
.1.3.6.1.4.1.11.2.14.11.15.2.42.1.5.1.1.15,HPN-ICF-EPON-MIB::hpnicfOnuPortIsolateEnable,INTEGER,read-write,,current,true(1):false(2), true(1) - Enable port isolate setting on all ethernet UNIs of the ONU. false(2) - Disable port isolate setting on all ethernet UNIs of the ONU. 
.1.3.6.1.4.1.11.2.14.11.15.2.42.1.5.2,HPN-ICF-EPON-MIB::hpnicfOnuLinkTestTable,,not-accessible,,current,, LLID link test applying to the ONU only including delay measurement option. The command tests a link to a single LLID over a period of time or once, using a variable number of measurement frames. The length of the measurement frames is also parameterized. The test uses a loopback mode of the ONU to return each measurement frame, loopback activation is done using randomly patterned OAM Protocol Data Unit(PDU) frames. 
.1.3.6.1.4.1.11.2.14.11.15.2.42.1.5.2.1,HPN-ICF-EPON-MIB::hpnicfOnuLinkTestEntry,,not-accessible,ifIndex,current,, The entry of hpnicfOnuLinkTestEntry. 
.1.3.6.1.4.1.11.2.14.11.15.2.42.1.5.2.1.1,HPN-ICF-EPON-MIB::hpnicfOnuLinkTestFrameNum,Integer32,read-write,,current,, Exact number of measurement frames. 
.1.3.6.1.4.1.11.2.14.11.15.2.42.1.5.2.1.2,HPN-ICF-EPON-MIB::hpnicfOnuLinkTestFrameSize,Integer32,read-write,,current,, Measurement frames data size, measured in bytes. Not including Preamble, SFD, VLAN tag, and FCS. Frame size minimum value is 56 - if VLAN tag is enabled('VLAN enable' field is set to ENABLE), and 60 - if VLAN tag is disabled. The actual measurement frames sent to the PON are always minimum 60 bytes long. When VLAN tag is enabled, the actual measurement frames size including FCS may reach (1514+4+4=)1522 bytes. 60(60 is VLAN tag disabled) - 1514 . 
.1.3.6.1.4.1.11.2.14.11.15.2.42.1.5.2.1.3,HPN-ICF-EPON-MIB::hpnicfOnuLinkTestDelay,INTEGER,read-write,,current,true(1):false(2), true:Link test includes delay measurement, which corresponds to the difference between sent and received times(including granting delay and firmware processing time overheads). false:Link test not includes a delay measurement. 
.1.3.6.1.4.1.11.2.14.11.15.2.42.1.5.2.1.4,HPN-ICF-EPON-MIB::hpnicfOnuLinkTestVlanTag,INTEGER,read-write,,current,true(1):false(2), true:Enable VLAN tag in link test frames. false:Link test not includes frames with VLAN tag. 
.1.3.6.1.4.1.11.2.14.11.15.2.42.1.5.2.1.5,HPN-ICF-EPON-MIB::hpnicfOnuLinkTestVlanPriority,Integer32,read-write,,current,, VLAN priority: 0-7. 
.1.3.6.1.4.1.11.2.14.11.15.2.42.1.5.2.1.6,HPN-ICF-EPON-MIB::hpnicfOnuLinkTestVlanTagID,Integer32,read-write,,current,, VLAN ID: 1-4094. 
.1.3.6.1.4.1.11.2.14.11.15.2.42.1.5.2.1.7,HPN-ICF-EPON-MIB::hpnicfOnuLinkTestResultSentFrameNum,Integer32,read-only,,current,, The total number of frames sent during the link test process. 
.1.3.6.1.4.1.11.2.14.11.15.2.42.1.5.2.1.8,HPN-ICF-EPON-MIB::hpnicfOnuLinkTestResultRetFrameNum,Integer32,read-only,,current,, The total number of frames return back during the link test process. 
.1.3.6.1.4.1.11.2.14.11.15.2.42.1.5.2.1.9,HPN-ICF-EPON-MIB::hpnicfOnuLinkTestResultRetErrFrameNum,Integer32,read-only,,current,, The total number of error frames return back during the link test process. 
.1.3.6.1.4.1.11.2.14.11.15.2.42.1.5.2.1.10,HPN-ICF-EPON-MIB::hpnicfOnuLinkTestResultMinDelay,Integer32,read-only,,current,, The minimum delay time in TQ units, which corresponds to the difference between sent and received times (including granting delay and firmware processing time overheads). It's invalid if the field 'hpnicfOnuLinkTestDelay' is set to be true. 
.1.3.6.1.4.1.11.2.14.11.15.2.42.1.5.2.1.11,HPN-ICF-EPON-MIB::hpnicfOnuLinkTestResultMeanDelay,Integer32,read-only,,current,, The average delay time in TQ units, which corresponds to the difference between sent and received times (including granting delay and firmware processing time overheads). It's invalid if the field 'hpnicfOnuLinkTestDelay' is set to be true. 
.1.3.6.1.4.1.11.2.14.11.15.2.42.1.5.2.1.12,HPN-ICF-EPON-MIB::hpnicfOnuLinkTestResultMaxDelay,Integer32,read-only,,current,, The maximum delay time in TQ units, which corresponds to the difference between sent and received times (including granting delay and firmware processing time overheads). It's invalid if the field 'hpnicfOnuLinkTestDelay' is set to be true. 
.1.3.6.1.4.1.11.2.14.11.15.2.42.1.5.3,HPN-ICF-EPON-MIB::hpnicfOnuBandWidthTable,,not-accessible,,current,, Set bandwidth policy parameters(restrictions)for a LLID (only for the ONU). Default policies are set to disable. Policy parameters will be erased upon LLID network disconnection. 
.1.3.6.1.4.1.11.2.14.11.15.2.42.1.5.3.1,HPN-ICF-EPON-MIB::hpnicfOnuBandWidthEntry,,not-accessible,ifIndex,current,, The entry of table hpnicfOnuBandWidthTable. 
.1.3.6.1.4.1.11.2.14.11.15.2.42.1.5.3.1.1,HPN-ICF-EPON-MIB::hpnicfOnuDownStreamBandWidthPolicy,INTEGER,read-write,,current,true(1):false(2), true:Enable static bandwidth configuration policing. false:Disable static bandwidth configuration policing. 
.1.3.6.1.4.1.11.2.14.11.15.2.42.1.5.3.1.2,HPN-ICF-EPON-MIB::hpnicfOnuDownStreamMaxBandWidth,Integer32,read-write,,current,, Maximum bandwidth allowed for the ONU, measured in Kbits/Sec. 
.1.3.6.1.4.1.11.2.14.11.15.2.42.1.5.3.1.3,HPN-ICF-EPON-MIB::hpnicfOnuDownStreamMaxBurstSize,Integer32,read-write,,current,, Maximal number of bytes in a burst. The value is truncated to the nearest smaller 128 bytes multiple value, measured in bytes. 
.1.3.6.1.4.1.11.2.14.11.15.2.42.1.5.3.1.4,HPN-ICF-EPON-MIB::hpnicfOnuDownStreamHighPriorityFirst,INTEGER,read-write,,current,true(1):false(2), true:Enable high priority frames preference. false:Disable high priority frames preference. 
.1.3.6.1.4.1.11.2.14.11.15.2.42.1.5.3.1.5,HPN-ICF-EPON-MIB::hpnicfOnuDownStreamShortFrameFirst,INTEGER,read-write,,current,true(1):false(2), true:Enable short frames preference. false:Disable short frames preference. 
.1.3.6.1.4.1.11.2.14.11.15.2.42.1.5.3.1.6,HPN-ICF-EPON-MIB::hpnicfOnuP2PBandWidthPolicy,INTEGER,read-write,,current,true(1):false(2), true:Enable static bandwidth configuration policing. false:Disable static bandwidth configuration policing. 
.1.3.6.1.4.1.11.2.14.11.15.2.42.1.5.3.1.7,HPN-ICF-EPON-MIB::hpnicfOnuP2PMaxBandWidth,Integer32,read-write,,current,, Maximum bandwidth allowed for the ONU, measured in Kbits/Sec. 
.1.3.6.1.4.1.11.2.14.11.15.2.42.1.5.3.1.8,HPN-ICF-EPON-MIB::hpnicfOnuP2PMaxBurstSize,Integer32,read-write,,current,, Maximal number of bytes in a burst. The value is truncated to the nearest smaller 128 bytes multiple value, measured in bytes. 
.1.3.6.1.4.1.11.2.14.11.15.2.42.1.5.3.1.9,HPN-ICF-EPON-MIB::hpnicfOnuP2PHighPriorityFirst,INTEGER,read-write,,current,true(1):false(2), true:Enable high priority frames preference. false:Disable high priority frames preference. 
.1.3.6.1.4.1.11.2.14.11.15.2.42.1.5.3.1.10,HPN-ICF-EPON-MIB::hpnicfOnuP2PShortFrameFirst,INTEGER,read-write,,current,true(1):false(2), true:Enable short frames preference. false:Disable short frames preference. 
.1.3.6.1.4.1.11.2.14.11.15.2.42.1.5.4,HPN-ICF-EPON-MIB::hpnicfOnuSlaManTable,,not-accessible,,current,, Two types of DBA algorithm are supported in the ONU. The internal SLA based algorithm is always activated. This table defines the primary parameter about the internal SLA algorithm. 
.1.3.6.1.4.1.11.2.14.11.15.2.42.1.5.4.1,HPN-ICF-EPON-MIB::hpnicfOnuSlaManEntry,,not-accessible,ifIndex,current,, The entry of table hpnicfOnuSlaManTable. 
.1.3.6.1.4.1.11.2.14.11.15.2.42.1.5.4.1.1,HPN-ICF-EPON-MIB::hpnicfOnuSlaMaxBandWidth,Integer32,read-write,,current,, Maximum bandwidth - measured in Kbit/s. The value of this object should be the multiple of the value of hpnicfOnuSlaBandWidthStepVal. The minimum bandwidth should not be larger than the maximum bandwidth. 
.1.3.6.1.4.1.11.2.14.11.15.2.42.1.5.4.1.2,HPN-ICF-EPON-MIB::hpnicfOnuSlaMinBandWidth,Integer32,read-write,,current,, Minimum bandwidth - measured in Kbit/s. The value of this object should be the multiple of the value of hpnicfOnuSlaBandWidthStepVal. The maximum bandwidth should be larger than the minimum bandwidth. 
.1.3.6.1.4.1.11.2.14.11.15.2.42.1.5.4.1.3,HPN-ICF-EPON-MIB::hpnicfOnuSlaBandWidthStepVal,Integer32,read-only,,current,, Granularity of bandwidth - measured in Kbit/s. The value of hpnicfOnuSlaMaxBandWidth and hpnicfOnuSlaMinBandWidth should be the multiple of the value of this object. 
.1.3.6.1.4.1.11.2.14.11.15.2.42.1.5.4.1.4,HPN-ICF-EPON-MIB::hpnicfOnuSlaDelay,INTEGER,read-write,,current,low(1):high(2), low - low delay. high - high delay. The delay constraint of a specific ONU. Set to high may improve the bandwidth usage at the cost of delay. 
.1.3.6.1.4.1.11.2.14.11.15.2.42.1.5.4.1.5,HPN-ICF-EPON-MIB::hpnicfOnuSlaFixedBandWidth,Integer32,read-write,,current,, Fixed bandwidth - measured in Kbit/s. The value of this object should be the multiple of the value of hpnicfOnuSlaBandWidthStepVal. 
.1.3.6.1.4.1.11.2.14.11.15.2.42.1.5.4.1.6,HPN-ICF-EPON-MIB::hpnicfOnuSlaPriorityClass,Integer32,read-write,,current,, Precedence of this flow over others in case of contention. 0 is the lowest priority and 7 is the highest priority. 
.1.3.6.1.4.1.11.2.14.11.15.2.42.1.5.4.1.7,HPN-ICF-EPON-MIB::hpnicfOnuSlaFixedPacketSize,Integer32,read-write,,current,, Fixed packet size - measured in byte. The value of this object should be valid when hpnicfOnuSlaFixedBandWidth is configured. 
.1.3.6.1.4.1.11.2.14.11.15.2.42.1.5.5,HPN-ICF-EPON-MIB::hpnicfOnuInfoTable,,not-accessible,,current,, Primary status of the specified ONU. There will be one row in this table for each information in the system. (1)Software and hardware versions of the specified ONU (hpnicfOnuHardMajorVersion, hpnicfOnuHardMinorVersion, hpnicfOnuUniMacType) (2)Several physical capabilities of the ONU. (hpnicfOnuLaserOnTime, hpnicfOnuLaserOffTime, hpnicfOnuGrantFifoDep.) (3)The operation(activation) status of the ONU. (hpnicfOnuWorkMode) 
.1.3.6.1.4.1.11.2.14.11.15.2.42.1.5.5.1,HPN-ICF-EPON-MIB::hpnicfOnuInfoEntry,,not-accessible,ifIndex,current,, The entry of the hpnicfOnuInfoTable. 
.1.3.6.1.4.1.11.2.14.11.15.2.42.1.5.5.1.1,HPN-ICF-EPON-MIB::hpnicfOnuHardMajorVersion,OCTET,read-only,,current,, ONU hardware major version. If the object length is zero, it means the version is unknown. 
.1.3.6.1.4.1.11.2.14.11.15.2.42.1.5.5.1.2,HPN-ICF-EPON-MIB::hpnicfOnuHardMinorVersion,OCTET,read-only,,current,, ONU hardware minor version. If the object length is zero, it means the version is unknown. 
.1.3.6.1.4.1.11.2.14.11.15.2.42.1.5.5.1.3,HPN-ICF-EPON-MIB::hpnicfOnuSoftwareVersion,OCTET,read-only,,current,, ONU software version. 
.1.3.6.1.4.1.11.2.14.11.15.2.42.1.5.5.1.4,HPN-ICF-EPON-MIB::hpnicfOnuUniMacType,INTEGER,read-only,,current,other(1):mii(2):gmii(3):tbi(4), ONU User Network Interface(UNI) port MAC type. 
.1.3.6.1.4.1.11.2.14.11.15.2.42.1.5.5.1.5,HPN-ICF-EPON-MIB::hpnicfOnuLaserOnTime,Integer32,read-only,,current,, The ONU laser on time measured in TQ units. If the object value is 0x7FFFFFFF, it means hpnicfOnuLaserOnTime is unknown. 
.1.3.6.1.4.1.11.2.14.11.15.2.42.1.5.5.1.6,HPN-ICF-EPON-MIB::hpnicfOnuLaserOffTime,Integer32,read-only,,current,, The ONU laser off time measured in TQ units. If the object value is 0x7FFFFFFF, it means hpnicfOnuLaserOffTime is unknown. 
.1.3.6.1.4.1.11.2.14.11.15.2.42.1.5.5.1.7,HPN-ICF-EPON-MIB::hpnicfOnuGrantFifoDep,Integer32,read-only,,current,, Maximal number of grant records an ONU can store, relevant to ONU only. range: 1 - 255. 0x7FFFFFFF: unknown value. 
.1.3.6.1.4.1.11.2.14.11.15.2.42.1.5.5.1.8,HPN-ICF-EPON-MIB::hpnicfOnuWorkMode,INTEGER,read-only,,current,other(1):on(2):pending(3):off(4), The operation(activation) mode of an ONU. other(1) - ONU is in another mode. on(2) - ONU is registered and authorized to the network. In this mode it works as a media converter. pending(3) - ONU has been registered to the PON, but not authorized to the network. off(4) - ONU is not registered to the network. 
.1.3.6.1.4.1.11.2.14.11.15.2.42.1.5.5.1.9,HPN-ICF-EPON-MIB::hpnicfOnuPCBVersion,OCTET,read-only,,current,, ONU PCB version. 
.1.3.6.1.4.1.11.2.14.11.15.2.42.1.5.5.1.10,HPN-ICF-EPON-MIB::hpnicfOnuRtt,Unsigned32,read-only,,current,, The signal round-trip-time(RTT) received. 
.1.3.6.1.4.1.11.2.14.11.15.2.42.1.5.5.1.11,HPN-ICF-EPON-MIB::hpnicfOnuEEPROMVersion,OCTET,read-only,,current,, ONU EEPROM version. 
.1.3.6.1.4.1.11.2.14.11.15.2.42.1.5.5.1.12,HPN-ICF-EPON-MIB::hpnicfOnuRegType,OCTET,read-only,,current,, ONU registered type. 
.1.3.6.1.4.1.11.2.14.11.15.2.42.1.5.5.1.13,HPN-ICF-EPON-MIB::hpnicfOnuHostType,OCTET,read-only,,current,, ONU host type. 
.1.3.6.1.4.1.11.2.14.11.15.2.42.1.5.5.1.14,HPN-ICF-EPON-MIB::hpnicfOnuDistance,Integer32,read-only,,current,, The distance between OLT and ONU, measured in meter. 
.1.3.6.1.4.1.11.2.14.11.15.2.42.1.5.5.1.15,HPN-ICF-EPON-MIB::hpnicfOnuLlid,Integer32,read-only,,current,, The link layer identifier, which uniquely identifies the ONU of a specific OLT. 
.1.3.6.1.4.1.11.2.14.11.15.2.42.1.5.5.1.16,HPN-ICF-EPON-MIB::hpnicfOnuVendorId,OCTET,read-only,,current,, ONU vendor ID. 
.1.3.6.1.4.1.11.2.14.11.15.2.42.1.5.5.1.17,HPN-ICF-EPON-MIB::hpnicfOnuFirmwareVersion,OCTET,read-only,,current,, ONU firmware version. 
.1.3.6.1.4.1.11.2.14.11.15.2.42.1.5.5.1.18,HPN-ICF-EPON-MIB::hpnicfOnuOpticalPowerReceivedByOlt,Integer32,read-only,,current,, The burst ONU optical power received by OLT, and when the ONU status is up the value is usable. It measured in 0.01 dBm unit. 
.1.3.6.1.4.1.11.2.14.11.15.2.42.1.5.6,HPN-ICF-EPON-MIB::hpnicfOnuMacAddrInfoTable,,not-accessible,,current,, This table used for getting MAC address information of ONU. 
.1.3.6.1.4.1.11.2.14.11.15.2.42.1.5.6.1,HPN-ICF-EPON-MIB::hpnicfOnuMacAddrInfoEntry,,not-accessible,ifIndex:hpnicfOnuMacIndex,current,, The entry of the hpnicfEponOnuMacAddrInfoTable. 
.1.3.6.1.4.1.11.2.14.11.15.2.42.1.5.6.1.1,HPN-ICF-EPON-MIB::hpnicfOnuMacIndex,Integer32,not-accessible,,current,, The index of ONUs in one OLT. 
.1.3.6.1.4.1.11.2.14.11.15.2.42.1.5.6.1.2,HPN-ICF-EPON-MIB::hpnicfOnuMacAddrFlag,INTEGER,read-only,,current,bound(1):registered(2):run(3):regIncorrect(4), The flag of ONU status. 1 - bound:The ONU is bound but not registered. 2 - registered:The ONU is registered but not bound. 3 - run:The ONU is registered and bound on one OLT. 4 - regIncorrect:The ONU is bound on one OLT and registered on another OLT. 
.1.3.6.1.4.1.11.2.14.11.15.2.42.1.5.6.1.3,HPN-ICF-EPON-MIB::hpnicfOnuMacAddress,OCTET,read-only,,current,, The MAC address of ONU. 
.1.3.6.1.4.1.11.2.14.11.15.2.42.1.5.7,HPN-ICF-EPON-MIB::hpnicfOnuBindMacAddrTable,,not-accessible,,current,, This table implements the following functions for ONUs: Bind MAC of ONU. 
.1.3.6.1.4.1.11.2.14.11.15.2.42.1.5.7.1,HPN-ICF-EPON-MIB::hpnicfOnuBindMacAddrEntry,,not-accessible,ifIndex,current,, The entry of the table hpnicfOnuBindMacAddrTable. 
.1.3.6.1.4.1.11.2.14.11.15.2.42.1.5.7.1.1,HPN-ICF-EPON-MIB::hpnicfOnuBindMacAddress,OCTET,read-write,,current,, Bind the MAC of ONU. While the MAC is not bound, the ONU can not go into effect and configurations can not be set. Set 0-0-0 (MAC address) to the EPON device port will unbind the relationship with the original MAC and configurations will be set to default values. 
.1.3.6.1.4.1.11.2.14.11.15.2.42.1.5.7.1.2,HPN-ICF-EPON-MIB::hpnicfOnuBindType,Integer32,read-write,,current,, Set the binding type with the ONU which is confined to the index of hpnicfEponOnuTypeDescr. 
.1.3.6.1.4.1.11.2.14.11.15.2.42.1.5.8,HPN-ICF-EPON-MIB::hpnicfOnuFirmwareUpdateTable,,not-accessible,,current,, This table implements the following functions for ONUs: 1. Update the ONU firmware. 2. Result of update ONU firmware. 
.1.3.6.1.4.1.11.2.14.11.15.2.42.1.5.8.1,HPN-ICF-EPON-MIB::hpnicfOnuFirmwareUpdateEntry,,not-accessible,ifIndex,current,, The entry of the table hpnicfOnuFirmwareUpdateTable. 
.1.3.6.1.4.1.11.2.14.11.15.2.42.1.5.8.1.1,HPN-ICF-EPON-MIB::hpnicfOnuUpdate,INTEGER,read-write,,current,update(1), update(1): Update the ONU firmware. Config the MIB object module hpnicfEponOnuUpdateFileName with the filename of ONU firmware first. 
.1.3.6.1.4.1.11.2.14.11.15.2.42.1.5.8.1.2,HPN-ICF-EPON-MIB::hpnicfOnuUpdateResult,INTEGER,read-only,,current,updating(1):ok(2):fail(3):fileNotExist(4):notSetFilename(5):fileNotMatchONU(6):timeout(7):otherError(8), The ONU firmware update result. updating - The ONU is updating firmware right now. ok - The ONU update result is OK. fail - The ONU update result is fail. fileNotExist - The ONU update failed because the file does not exist. notSetFilename - The ONU firmware filename is not set. fileNotMatchONU - The ONU firmware does not match the ONU. timeout - The ONU responses timeout. otherError - The ONU update result is unknown. 
.1.3.6.1.4.1.11.2.14.11.15.2.42.1.5.8.1.3,HPN-ICF-EPON-MIB::hpnicfOnuUpdateFileName,OCTET,read-write,,current,, The filename of the ONU firmware to be updated. Note that the filename must contain the file path. 
.1.3.6.1.4.1.11.2.14.11.15.2.42.1.5.9,HPN-ICF-EPON-MIB::hpnicfOnuLinkTestFrameNumMinVal,Integer32,read-only,,current,,The lower limit of measurement frames which is confined to hpnicfOnuLinkTestFrameNum.
.1.3.6.1.4.1.11.2.14.11.15.2.42.1.5.10,HPN-ICF-EPON-MIB::hpnicfOnuLinkTestFrameNumMaxVal,Integer32,read-only,,current,,The upper limit of measurement frames which is confined to hpnicfOnuLinkTestFrameNum.
.1.3.6.1.4.1.11.2.14.11.15.2.42.1.5.11,HPN-ICF-EPON-MIB::hpnicfOnuSlaMaxBandWidthMinVal,Integer32,read-only,,current,, The lower limit of maximum-bandwidth which is confined to hpnicfOnuSlaMaxBandWidth.
.1.3.6.1.4.1.11.2.14.11.15.2.42.1.5.12,HPN-ICF-EPON-MIB::hpnicfOnuSlaMaxBandWidthMaxVal,Integer32,read-only,,current,, The upper limit of maximum-bandwidth which is confined to hpnicfOnuSlaMaxBandWidth.
.1.3.6.1.4.1.11.2.14.11.15.2.42.1.5.13,HPN-ICF-EPON-MIB::hpnicfOnuSlaMinBandWidthMinVal,Integer32,read-only,,current,, The lower limit of minimum-bandwidth which is confined to hpnicfOnuSlaMinBandWidth.
.1.3.6.1.4.1.11.2.14.11.15.2.42.1.5.14,HPN-ICF-EPON-MIB::hpnicfOnuSlaMinBandWidthMaxVal,Integer32,read-only,,current,, The upper limit of minimum-bandwidth which is confined to hpnicfOnuSlaMinBandWidth.
.1.3.6.1.4.1.11.2.14.11.15.2.42.1.5.15,HPN-ICF-EPON-MIB::hpnicfEponOnuTypeManTable,,not-accessible,,current,, This table is used for getting ONU bind type in current version. 
.1.3.6.1.4.1.11.2.14.11.15.2.42.1.5.15.1,HPN-ICF-EPON-MIB::hpnicfEponOnuTypeManEntry,,not-accessible,hpnicfEponOnuTypeIndex,current,, The entry of the hpnicfEponOnuTypeManTable. 
.1.3.6.1.4.1.11.2.14.11.15.2.42.1.5.15.1.1,HPN-ICF-EPON-MIB::hpnicfEponOnuTypeIndex,Integer32,not-accessible,,current,, The ONU type index. 
.1.3.6.1.4.1.11.2.14.11.15.2.42.1.5.15.1.2,HPN-ICF-EPON-MIB::hpnicfEponOnuTypeDescr,OCTET,read-only,,current,, The ONU type description which can be used to bind ONU in current version. the value of hpnicfOnuBindType can be configured by the index of hpnicfEponOnuTypeDescr. 
.1.3.6.1.4.1.11.2.14.11.15.2.42.1.5.16,HPN-ICF-EPON-MIB::hpnicfOnuPacketManTable,,not-accessible,,current,, This table implements the following functions: (1)Manage packet priority trust mode. (2)Manage packet queue-scheduler mode. 
.1.3.6.1.4.1.11.2.14.11.15.2.42.1.5.16.1,HPN-ICF-EPON-MIB::hpnicfOnuPacketManEntry,,not-accessible,ifIndex,current,, The entry of the hpnicfOnuPacketManTable. 
.1.3.6.1.4.1.11.2.14.11.15.2.42.1.5.16.1.1,HPN-ICF-EPON-MIB::hpnicfOnuPriorityTrust,INTEGER,read-write,,current,dscp(1):ipprecedence(2):cos(3), The QOS mode which is assigned on ONU. dscp - The service dscp of politic Priority. ipprecedence - The service IP precedence of politic Priority. cos - The service cos of politic Priority. 
.1.3.6.1.4.1.11.2.14.11.15.2.42.1.5.16.1.2,HPN-ICF-EPON-MIB::hpnicfOnuQueueScheduler,INTEGER,read-write,,current,spq(1):wfq(2), The packet queue-scheduler mode which is assigned on ONU. spq - strict priority queuing. wfq - specifies the weights for weighted round-robin queuing. 
.1.3.6.1.4.1.11.2.14.11.15.2.42.1.5.17,HPN-ICF-EPON-MIB::hpnicfOnuProtocolTable,,not-accessible,,current,, This table implements the following functions: (1)Manage STP status. (2)Manage IGMP-snooping. (3)Manage DHCP-snooping. 
.1.3.6.1.4.1.11.2.14.11.15.2.42.1.5.17.1,HPN-ICF-EPON-MIB::hpnicfOnuProtocolEntry,,not-accessible,ifIndex,current,, The entry of hpnicfOnuProtocolTable. 
.1.3.6.1.4.1.11.2.14.11.15.2.42.1.5.17.1.1,HPN-ICF-EPON-MIB::hpnicfOnuStpStatus,INTEGER,read-write,,current,true(1):false(2), true(1) - STP status enable on ONU. false(2) - STP status disable on ONU. 
.1.3.6.1.4.1.11.2.14.11.15.2.42.1.5.17.1.2,HPN-ICF-EPON-MIB::hpnicfOnuIgmpSnoopingStatus,INTEGER,read-write,,current,true(1):false(2), true(1) - IGMP snooping status enable on ONU. false(2) - IGMP snooping status disable on ONU. 
.1.3.6.1.4.1.11.2.14.11.15.2.42.1.5.17.1.3,HPN-ICF-EPON-MIB::hpnicfOnuDhcpsnoopingOption82,INTEGER,read-write,,current,true(1):false(2), true(1) - DHCP snooping Option 82 status enable on ONU. false(2) - DHCP snooping Option 82 status disable on ONU. 
.1.3.6.1.4.1.11.2.14.11.15.2.42.1.5.17.1.4,HPN-ICF-EPON-MIB::hpnicfOnuDhcpsnooping,INTEGER,read-write,,current,true(1):false(2), true(1) - DHCP snooping status enable on ONU. false(2) - DHCP snooping status disable on ONU. 
.1.3.6.1.4.1.11.2.14.11.15.2.42.1.5.17.1.5,HPN-ICF-EPON-MIB::hpnicfOnuPppoe,INTEGER,read-write,,current,true(1):false(2), true(1) - PPPOE status enable on ONU. false(2) - PPPOE status disable on ONU. 
.1.3.6.1.4.1.11.2.14.11.15.2.42.1.5.17.1.6,HPN-ICF-EPON-MIB::hpnicfOnuIgmpSnoopingHostAgingT,Integer32,read-write,,current,, Set the host aging time of IGMP on ONU. 
.1.3.6.1.4.1.11.2.14.11.15.2.42.1.5.17.1.7,HPN-ICF-EPON-MIB::hpnicfOnuIgmpSnoopingMaxRespT,Integer32,read-write,,current,, Set the max response time of IGMP on ONU. 
.1.3.6.1.4.1.11.2.14.11.15.2.42.1.5.17.1.8,HPN-ICF-EPON-MIB::hpnicfOnuIgmpSnoopingRouterAgingT,Integer32,read-write,,current,, Set the router aging time of IGMP on ONU. 
.1.3.6.1.4.1.11.2.14.11.15.2.42.1.5.17.1.9,HPN-ICF-EPON-MIB::hpnicfOnuIgmpSnoopingAggReportS,INTEGER,read-write,,current,true(1):false(2), true(1) - Igmp snooping aggregation report status enable on ONU. false(2) - Igmp snooping aggregation report status disable on ONU. 
.1.3.6.1.4.1.11.2.14.11.15.2.42.1.5.17.1.10,HPN-ICF-EPON-MIB::hpnicfOnuIgmpSnoopingAggLeaveS,INTEGER,read-write,,current,true(1):false(2), true(1) - Igmp snooping aggregation leave status enable on ONU. false(2) - Igmp snooping aggregation leave status disable on ONU. 
.1.3.6.1.4.1.11.2.14.11.15.2.42.1.5.18,HPN-ICF-EPON-MIB::hpnicfOnuDot1xTable,,not-accessible,,current,, This table implements the following functions: (1)Manage 802.1x account. (2)Manage 802.1x password. ONU will be authorized to send and receive frames when the account and the password are all right, otherwise this ONU will be unavailable. 
.1.3.6.1.4.1.11.2.14.11.15.2.42.1.5.18.1,HPN-ICF-EPON-MIB::hpnicfOnuDot1xEntry,,not-accessible,ifIndex,current,, The entry of the hpnicfOnuDot1xTable. 
.1.3.6.1.4.1.11.2.14.11.15.2.42.1.5.18.1.1,HPN-ICF-EPON-MIB::hpnicfOnuDot1xAccount,OCTET,read-write,,current,, ONU 802.1X account. The object value cannot be set as 'a', 'al' or 'all'. The object should be set together with hpnicfOnuDot1xPassword. 
.1.3.6.1.4.1.11.2.14.11.15.2.42.1.5.18.1.2,HPN-ICF-EPON-MIB::hpnicfOnuDot1xPassword,OCTET,read-write,,current,, ONU 802.1X password. The object should be set together with hpnicfOnuDot1xAccount. 
.1.3.6.1.4.1.11.2.14.11.15.2.42.1.5.19,HPN-ICF-EPON-MIB::hpnicfOnuPriorityQueueTable,,not-accessible,,current,, This table contains specific information of priority queue. 
.1.3.6.1.4.1.11.2.14.11.15.2.42.1.5.19.1,HPN-ICF-EPON-MIB::hpnicfOnuPriorityQueueEntry,,not-accessible,ifIndex:hpnicfOnuQueueDirection:hpnicfOnuQueueId,current,, The entry of hpnicfOnuPriorityQueueTable. 
.1.3.6.1.4.1.11.2.14.11.15.2.42.1.5.19.1.1,HPN-ICF-EPON-MIB::hpnicfOnuQueueDirection,INTEGER,not-accessible,,current,inbound(1):outbound(2), The direction of priority queue. 
.1.3.6.1.4.1.11.2.14.11.15.2.42.1.5.19.1.2,HPN-ICF-EPON-MIB::hpnicfOnuQueueId,Integer32,not-accessible,,current,, The queue ID of priority queue. 
.1.3.6.1.4.1.11.2.14.11.15.2.42.1.5.19.1.3,HPN-ICF-EPON-MIB::hpnicfOnuQueueSize,Integer32,read-write,,current,, The size of priority queue, measured in percent. The total length of all priority queues is a constant, by default, it is assigned to all of the priority queues evenly. The length of each priority queue may be changed by changing the value of hpnicfOnuPriorityQueueSize. The total size of the inbound or outbound priority queues should be not more than 100. 
.1.3.6.1.4.1.11.2.14.11.15.2.42.1.5.20,HPN-ICF-EPON-MIB::hpnicfOnuCountTable,,not-accessible,,current,, This table contains statistics of ONU port. 
.1.3.6.1.4.1.11.2.14.11.15.2.42.1.5.20.1,HPN-ICF-EPON-MIB::hpnicfOnuCountEntry,,not-accessible,ifIndex,current,, The entry of hpnicfOnuCountTable. 
.1.3.6.1.4.1.11.2.14.11.15.2.42.1.5.20.1.1,HPN-ICF-EPON-MIB::hpnicfOnuInCRCErrPkts,Counter64,read-only,,current,, The total number of frames received with bad CRC checksum. 
.1.3.6.1.4.1.11.2.14.11.15.2.42.1.5.20.1.2,HPN-ICF-EPON-MIB::hpnicfOnuOutDroppedFrames,Counter64,read-only,,current,, The total number of frames dropped because of buffer failure. 
.1.3.6.1.4.1.11.2.14.11.15.2.42.1.5.21,HPN-ICF-EPON-MIB::hpnicfEponOnuScalarGroup,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.2.42.1.5.21.1,HPN-ICF-EPON-MIB::hpnicfOnuPriorityQueueSizeMinVal,Integer32,read-only,,current,, The lower limit of queue size which is confined to hpnicfOnuQueueSize. 
.1.3.6.1.4.1.11.2.14.11.15.2.42.1.5.21.2,HPN-ICF-EPON-MIB::hpnicfOnuPriorityQueueSizeMaxVal,Integer32,read-only,,current,, The upper limit of queue size which is confined to hpnicfOnuQueueSize. 
.1.3.6.1.4.1.11.2.14.11.15.2.42.1.5.21.3,HPN-ICF-EPON-MIB::hpnicfOnuPriorityQueueBandwidthMinVal,Integer32,read-only,,current,, The lower limit of hpnicfOnuQueueMaxBandwidth. 
.1.3.6.1.4.1.11.2.14.11.15.2.42.1.5.21.4,HPN-ICF-EPON-MIB::hpnicfOnuPriorityQueueBandwidthMaxVal,Integer32,read-only,,current,, The upper limit of hpnicfOnuQueueMaxBandwidth. 
.1.3.6.1.4.1.11.2.14.11.15.2.42.1.5.21.5,HPN-ICF-EPON-MIB::hpnicfOnuPriorityQueueBurstsizeMinVal,Integer32,read-only,,current,, The lower limit of hpnicfOnuQueueMaxBurstsize. 
.1.3.6.1.4.1.11.2.14.11.15.2.42.1.5.21.6,HPN-ICF-EPON-MIB::hpnicfOnuPriorityQueueBurstsizeMaxVal,Integer32,read-only,,current,, The upper limit of hpnicfOnuQueueMaxBurstsize. 
.1.3.6.1.4.1.11.2.14.11.15.2.42.1.5.21.7,HPN-ICF-EPON-MIB::hpnicfOnuUpdateByTypeNextIndex,Integer32,read-only,,current,, Offer a free index of hpnicfOnuFirmwareUpdateByTypeTable. 
.1.3.6.1.4.1.11.2.14.11.15.2.42.1.5.22,HPN-ICF-EPON-MIB::hpnicfOnuQueueBandwidthTable,,not-accessible,,current,, This table contains specific bandwidth information of ONU priority queue. 
.1.3.6.1.4.1.11.2.14.11.15.2.42.1.5.22.1,HPN-ICF-EPON-MIB::hpnicfOnuQueueBandwidthEntry,,not-accessible,ifIndex:hpnicfOnuQueueDirection:hpnicfOnuQueueId,current,, The entry of hpnicfOnuQueueBandwidthTable. 
.1.3.6.1.4.1.11.2.14.11.15.2.42.1.5.22.1.1,HPN-ICF-EPON-MIB::hpnicfOnuQueueMaxBandwidth,Integer32,read-write,,current,, The maximum bandwidth of specific ONU priority queue, measured in 100Kbps. 
.1.3.6.1.4.1.11.2.14.11.15.2.42.1.5.22.1.2,HPN-ICF-EPON-MIB::hpnicfOnuQueueMaxBurstsize,Integer32,read-write,,current,, The maximum burst size of specific ONU priority queue, measured in 64Bytes. 
.1.3.6.1.4.1.11.2.14.11.15.2.42.1.5.22.1.3,HPN-ICF-EPON-MIB::hpnicfOnuQueuePolicyStatus,INTEGER,read-write,,current,true(1):false(2), true - enable bandwidth policy false - disable bandwidth policy The bandwidth administrative status of specific ONU priority queue. 
.1.3.6.1.4.1.11.2.14.11.15.2.42.1.5.23,HPN-ICF-EPON-MIB::hpnicfOnuIpAddressTable,,not-accessible,,current,, ONU IP address table. 
.1.3.6.1.4.1.11.2.14.11.15.2.42.1.5.23.1,HPN-ICF-EPON-MIB::hpnicfOnuIpAddressEntry,,not-accessible,ifIndex,current,, The entry of hpnicfOnuIpAddressTable. 
.1.3.6.1.4.1.11.2.14.11.15.2.42.1.5.23.1.1,HPN-ICF-EPON-MIB::hpnicfOnuIpAddress,IpAddress,read-write,,current,, The IP address assigned to the ONU. 
.1.3.6.1.4.1.11.2.14.11.15.2.42.1.5.23.1.2,HPN-ICF-EPON-MIB::hpnicfOnuIpAddressMask,IpAddress,read-write,,current,, The mask of IP address denoted by hpnicfOnuIpAddress. 
.1.3.6.1.4.1.11.2.14.11.15.2.42.1.5.23.1.3,HPN-ICF-EPON-MIB::hpnicfOnuIpAddressGateway,IpAddress,read-write,,current,, The gateway of IP address denoted by hpnicfOnuIpAddress. 
.1.3.6.1.4.1.11.2.14.11.15.2.42.1.5.23.1.4,HPN-ICF-EPON-MIB::hpnicfOnuDhcpallocate,INTEGER,read-write,,current,true(1):false(2), true(1) - ONU auto allocate IP address status enable. false(2) - ONU auto allocate IP address status disable. 
.1.3.6.1.4.1.11.2.14.11.15.2.42.1.5.23.1.5,HPN-ICF-EPON-MIB::hpnicfOnuManageVID,Integer32,read-write,,current,, The management VLAN of ONU denoted by hpnicfOnuManageVID. 
.1.3.6.1.4.1.11.2.14.11.15.2.42.1.5.23.1.6,HPN-ICF-EPON-MIB::hpnicfOnuManageVlanIntfS,INTEGER,read-write,,current,true(1):false(2), The management interface status of ONU denoted by hpnicfOnuManageVlanIntfS. 
.1.3.6.1.4.1.11.2.14.11.15.2.42.1.5.24,HPN-ICF-EPON-MIB::hpnicfOnuChipSetInfoTable,,not-accessible,,current,, ONU vendor specific information of ONU. 
.1.3.6.1.4.1.11.2.14.11.15.2.42.1.5.24.1,HPN-ICF-EPON-MIB::hpnicfOnuChipSetInfoEntry,,not-accessible,ifIndex,current,, The entry of hpnicfOnuChipSetInfoTable. 
.1.3.6.1.4.1.11.2.14.11.15.2.42.1.5.24.1.1,HPN-ICF-EPON-MIB::hpnicfOnuChipSetVendorId,OCTET,read-only,,current,, Chipset vendor ID, which identifies the ONU's PON chip vendor according JEDEC ID code. 
.1.3.6.1.4.1.11.2.14.11.15.2.42.1.5.24.1.2,HPN-ICF-EPON-MIB::hpnicfOnuChipSetModel,OCTET,read-only,,current,, Chip model, numbering(range from 0 to 0xFF) by the chip vendor. 
.1.3.6.1.4.1.11.2.14.11.15.2.42.1.5.24.1.3,HPN-ICF-EPON-MIB::hpnicfOnuChipSetRevision,Integer32,read-only,,current,, Chip revision. 
.1.3.6.1.4.1.11.2.14.11.15.2.42.1.5.24.1.4,HPN-ICF-EPON-MIB::hpnicfOnuChipSetDesignDate,OCTET,read-only,,current,, Chip design date. 
.1.3.6.1.4.1.11.2.14.11.15.2.42.1.5.25,HPN-ICF-EPON-MIB::hpnicfOnuCapabilityTable,,not-accessible,,current,, Capability of ONU. 
.1.3.6.1.4.1.11.2.14.11.15.2.42.1.5.25.1,HPN-ICF-EPON-MIB::hpnicfOnuCapabilityEntry,,not-accessible,ifIndex,current,, The entry of the table hpnicfOnuCapabilityTable. 
.1.3.6.1.4.1.11.2.14.11.15.2.42.1.5.25.1.1,HPN-ICF-EPON-MIB::hpnicfOnuServiceSupported,BITS,read-only,,current,geinterfacesupport(0):feinterfacesupport(1):voipservicesupport(2):tdmservicesupport(3), Services types supported by the ONU. These functional groups can be supported independently. geinterfacesupport - supporting (1)/not supporting(0) Gbit Ethernet GE interface. feinterfacesupport - supporting (1)/not supporting(0) 100M Ethernet FE interface.(maximum rate is 100M, without GEinterface) voipservicesupport - supporting (1)/not supporting(0)VoIP service. tdmservicesupport - supporting (1)/not supporting(0)TDM CES service. 
.1.3.6.1.4.1.11.2.14.11.15.2.42.1.5.25.1.2,HPN-ICF-EPON-MIB::hpnicfOnuGEPortNumber,Integer32,read-only,,current,, The current gigabit ethernet ports number supported by the ONU. 
.1.3.6.1.4.1.11.2.14.11.15.2.42.1.5.25.1.3,HPN-ICF-EPON-MIB::hpnicfOnuFEPortNumber,Integer32,read-only,,current,, the current fast ethernet ports number supported by the ONU. 
.1.3.6.1.4.1.11.2.14.11.15.2.42.1.5.25.1.4,HPN-ICF-EPON-MIB::hpnicfOnuPOTSPortNumber,Integer32,read-only,,current,, The current POTS ports number supported by the ONU 
.1.3.6.1.4.1.11.2.14.11.15.2.42.1.5.25.1.5,HPN-ICF-EPON-MIB::hpnicfOnuE1PortsNumber,Integer32,read-only,,current,, The current E1 ports number supported by the ONU. 
.1.3.6.1.4.1.11.2.14.11.15.2.42.1.5.25.1.6,HPN-ICF-EPON-MIB::hpnicfOnuUpstreamQueueNumber,Integer32,read-only,,current,, The number of upstream queues supported by the ONU. 
.1.3.6.1.4.1.11.2.14.11.15.2.42.1.5.25.1.7,HPN-ICF-EPON-MIB::hpnicfOnuMaxUpstreamQueuePerPort,Integer32,read-only,,current,, The number of maximum upstream queues per port of the ONU. 
.1.3.6.1.4.1.11.2.14.11.15.2.42.1.5.25.1.8,HPN-ICF-EPON-MIB::hpnicfOnuDownstreamQueueNumber,Integer32,read-only,,current,, The number of downstream queues supported by the ONU. 
.1.3.6.1.4.1.11.2.14.11.15.2.42.1.5.25.1.9,HPN-ICF-EPON-MIB::hpnicfOnuMaxDownstreamQueuePerPort,Integer32,read-only,,current,, The number of maximum downstream queues per port of the ONU. 
.1.3.6.1.4.1.11.2.14.11.15.2.42.1.5.25.1.10,HPN-ICF-EPON-MIB::hpnicfOnuBatteryBackup,INTEGER,read-only,,current,true(1):false(2), true(1) - ONU supports a reserve battery. false(2) - ONU does not support a reserve battery. 
.1.3.6.1.4.1.11.2.14.11.15.2.42.1.5.25.1.11,HPN-ICF-EPON-MIB::hpnicfOnuIgspFastLeaveSupported,INTEGER,read-only,,current,true(1):false(2), true(1) - ONU supports fast leave in igsp mode. false(2) - ONU does not support fast leave in igsp mode. 
.1.3.6.1.4.1.11.2.14.11.15.2.42.1.5.25.1.12,HPN-ICF-EPON-MIB::hpnicfOnuMCtrlFastLeaveSupported,INTEGER,read-only,,current,true(1):false(2), true(1) - ONU supports fast leave in multicast control mode. false(2) - ONU does not support fast leave in multicast control mode. 
.1.3.6.1.4.1.11.2.14.11.15.2.42.1.5.26,HPN-ICF-EPON-MIB::hpnicfOnuDbaReportTable,,not-accessible,,current,, This table defines the information of DBA(dynamic bandwidth allocation) report threshold contained in the MPCP report frames. 
.1.3.6.1.4.1.11.2.14.11.15.2.42.1.5.26.1,HPN-ICF-EPON-MIB::hpnicfOnuDbaReportEntry,,not-accessible,ifIndex:hpnicfOnuDbaReportQueueId,current,, The entry of the table hpnicfOnuDbaReportTable. 
.1.3.6.1.4.1.11.2.14.11.15.2.42.1.5.26.1.1,HPN-ICF-EPON-MIB::hpnicfOnuDbaReportQueueId,Integer32,not-accessible,,current,, The DBA report queue ID. 
.1.3.6.1.4.1.11.2.14.11.15.2.42.1.5.26.1.2,HPN-ICF-EPON-MIB::hpnicfOnuDbaReportThreshold,Integer32,read-write,,current,, The threshold of the DBA report queue. the following is the queue ID and the related default threshold setting. 1 - 0 2 - 0 3 - 0 4 - 65535 5 - 65535 6 - 0 7 - 0 8 - 0 
.1.3.6.1.4.1.11.2.14.11.15.2.42.1.5.26.1.3,HPN-ICF-EPON-MIB::hpnicfOnuDbaReportStatus,INTEGER,read-write,,current,enable(1):disable(2), enable -threshold configuration is active for the queue. disable -threshold configuration is not active for the queue. 
.1.3.6.1.4.1.11.2.14.11.15.2.42.1.5.27,HPN-ICF-EPON-MIB::hpnicfOnuCosToLocalPrecedenceTable,,not-accessible,,current,,Table of map of the COS to local-precedence.
.1.3.6.1.4.1.11.2.14.11.15.2.42.1.5.27.1,HPN-ICF-EPON-MIB::hpnicfOnuCosToLocalPrecedenceEntry,,not-accessible,ifIndex:hpnicfOnuCosToLocalPrecedenceCosIndex,current,,Configuration information of map of the COS to local precedence.
.1.3.6.1.4.1.11.2.14.11.15.2.42.1.5.27.1.1,HPN-ICF-EPON-MIB::hpnicfOnuCosToLocalPrecedenceCosIndex,Integer32,read-only,,current,,Index of the map, obtains from packet cos value.
.1.3.6.1.4.1.11.2.14.11.15.2.42.1.5.27.1.2,HPN-ICF-EPON-MIB::hpnicfOnuCosToLocalPrecedenceValue,Integer32,read-write,,current,,Value of local precedence.
.1.3.6.1.4.1.11.2.14.11.15.2.42.1.5.28,HPN-ICF-EPON-MIB::hpnicfEponOnuStpPortTable,,not-accessible,,current,,Table of ONU STP ports.
.1.3.6.1.4.1.11.2.14.11.15.2.42.1.5.28.1,HPN-ICF-EPON-MIB::hpnicfEponOnuStpPortEntry,,not-accessible,ifIndex:hpnicfEponStpPortIndex,current,,Configuration information of ONU STP ports.
.1.3.6.1.4.1.11.2.14.11.15.2.42.1.5.28.1.1,HPN-ICF-EPON-MIB::hpnicfEponStpPortIndex,Integer32,accessible-for-notify,,current,,The index of the STP ports.
.1.3.6.1.4.1.11.2.14.11.15.2.42.1.5.28.1.2,HPN-ICF-EPON-MIB::hpnicfEponStpPortDescr,OCTET,accessible-for-notify,,current,,The description of the STP ports.
.1.3.6.1.4.1.11.2.14.11.15.2.42.1.5.28.1.3,HPN-ICF-EPON-MIB::hpnicfEponStpPortState,INTEGER,accessible-for-notify,,current,disabled(1):discarding(2):learning(3):forwarding(4),The current state of the port (i.e. disabled, discarding, learning and forwarding).
.1.3.6.1.4.1.11.2.14.11.15.2.42.1.5.29,HPN-ICF-EPON-MIB::hpnicfOnuPhysicalTable,,not-accessible,,current,, This table is used for getting ONU physical information. 
.1.3.6.1.4.1.11.2.14.11.15.2.42.1.5.29.1,HPN-ICF-EPON-MIB::hpnicfOnuPhysicalEntry,,not-accessible,ifIndex,current,, The entry of the hpnicfOnuPhysicalTable. 
.1.3.6.1.4.1.11.2.14.11.15.2.42.1.5.29.1.1,HPN-ICF-EPON-MIB::hpnicfOnuBridgeMac,OCTET,read-only,,current,, The bridge MAC address of ONU. 
.1.3.6.1.4.1.11.2.14.11.15.2.42.1.5.29.1.2,HPN-ICF-EPON-MIB::hpnicfOnuFirstPonMac,OCTET,read-only,,current,, The MAC address of ONU first PON port. 
.1.3.6.1.4.1.11.2.14.11.15.2.42.1.5.29.1.3,HPN-ICF-EPON-MIB::hpnicfOnuFirstPonRegState,INTEGER,read-only,,current,notExist(1):absent(2):offline(3):silent(4):down(5):up(6), The register state of ONU first PON port. 
.1.3.6.1.4.1.11.2.14.11.15.2.42.1.5.29.1.4,HPN-ICF-EPON-MIB::hpnicfOnuSecondPonMac,OCTET,read-only,,current,, The MAC address of ONU second PON port. 
.1.3.6.1.4.1.11.2.14.11.15.2.42.1.5.29.1.5,HPN-ICF-EPON-MIB::hpnicfOnuSecondPonRegState,INTEGER,read-only,,current,notExist(1):absent(2):offline(3):silent(4):down(5):up(6), The register state of ONU second PON port. 
.1.3.6.1.4.1.11.2.14.11.15.2.42.1.5.30,HPN-ICF-EPON-MIB::hpnicfOnuSmlkTable,,not-accessible,,current,, This table is used for getting ONU SMLK information. 
.1.3.6.1.4.1.11.2.14.11.15.2.42.1.5.30.1,HPN-ICF-EPON-MIB::hpnicfOnuSmlkEntry,,not-accessible,ifIndex:hpnicfOnuSmlkGroupID,current,, The entry of the hpnicfOnuSmlkTable. 
.1.3.6.1.4.1.11.2.14.11.15.2.42.1.5.30.1.1,HPN-ICF-EPON-MIB::hpnicfOnuSmlkGroupID,Integer32,read-only,,current,, The SMLK group ID of ONU. 
.1.3.6.1.4.1.11.2.14.11.15.2.42.1.5.30.1.2,HPN-ICF-EPON-MIB::hpnicfOnuSmlkFirstPonRole,INTEGER,read-only,,current,master(1):slave(2):null(3), The role of ONU first PON port in a SMLK group. 
.1.3.6.1.4.1.11.2.14.11.15.2.42.1.5.30.1.3,HPN-ICF-EPON-MIB::hpnicfOnuSmlkFirstPonStatus,INTEGER,read-only,,current,active(1):standby(2):down(3):null(4), The transmitting status of ONU first PON port in a SMLK group. 
.1.3.6.1.4.1.11.2.14.11.15.2.42.1.5.30.1.4,HPN-ICF-EPON-MIB::hpnicfOnuSmlkSecondPonRole,INTEGER,read-only,,current,master(1):slave(2):null(3), The role of ONU second PON port in a SMLK group. 
.1.3.6.1.4.1.11.2.14.11.15.2.42.1.5.30.1.5,HPN-ICF-EPON-MIB::hpnicfOnuSmlkSecondPonStatus,INTEGER,read-only,,current,active(1):standby(2):down(3):null(4), The transmitting status of ONU second PON port in a SMLK group. 
.1.3.6.1.4.1.11.2.14.11.15.2.42.1.5.31,HPN-ICF-EPON-MIB::hpnicfOnuRS485PropertiesTable,,not-accessible,,current,,Property table.
.1.3.6.1.4.1.11.2.14.11.15.2.42.1.5.31.1,HPN-ICF-EPON-MIB::hpnicfOnuRS485PropertiesEntry,,not-accessible,ifIndex:hpnicfOnuRS485SerialIndex,current,,The entry of property table.
.1.3.6.1.4.1.11.2.14.11.15.2.42.1.5.31.1.1,HPN-ICF-EPON-MIB::hpnicfOnuRS485SerialIndex,Integer32,not-accessible,,current,,The index of serial port.
.1.3.6.1.4.1.11.2.14.11.15.2.42.1.5.31.1.2,HPN-ICF-EPON-MIB::hpnicfOnuRS485BaudRate,INTEGER,read-write,,current,baudRate300(1):baudRate600(2):baudRate1200(3):baudRate2400(4):baudRate4800(5):baudRate9600(6):baudRate19200(7):baudRate38400(8):baudRate57600(9):baudRate115200(10),The port baud rate.
.1.3.6.1.4.1.11.2.14.11.15.2.42.1.5.31.1.3,HPN-ICF-EPON-MIB::hpnicfOnuRS485DataBits,INTEGER,read-write,,current,five(1):six(2):seven(3):eight(4),The port number of data bits in a character.
.1.3.6.1.4.1.11.2.14.11.15.2.42.1.5.31.1.4,HPN-ICF-EPON-MIB::hpnicfOnuRS485Parity,INTEGER,read-write,,current,none(1):odd(2):even(3):mark(4):space(5),The port sense of a character parity bit.
.1.3.6.1.4.1.11.2.14.11.15.2.42.1.5.31.1.5,HPN-ICF-EPON-MIB::hpnicfOnuRS485StopBits,INTEGER,read-write,,current,one(1):two(2):oneAndHalf(3),The port number of stop bits.
.1.3.6.1.4.1.11.2.14.11.15.2.42.1.5.31.1.6,HPN-ICF-EPON-MIB::hpnicfOnuRS485FlowControl,INTEGER,read-write,,current,none(1):hardware(2):xonOrxoff(3),The port type of input flow control. 'none' indicates no flow control at this level. 'hardware' indicates using hardware signals. 'xonOrxoff' indicates using software function.
.1.3.6.1.4.1.11.2.14.11.15.2.42.1.5.31.1.7,HPN-ICF-EPON-MIB::hpnicfOnuRS485TXOctets,Integer32,read-only,,current,,The number of output octets about the port. The unit is byte.
.1.3.6.1.4.1.11.2.14.11.15.2.42.1.5.31.1.8,HPN-ICF-EPON-MIB::hpnicfOnuRS485RXOctets,Integer32,read-only,,current,,The number of input octets about the port. The unit is byte.
.1.3.6.1.4.1.11.2.14.11.15.2.42.1.5.31.1.9,HPN-ICF-EPON-MIB::hpnicfOnuRS485TXErrOctets,Integer32,read-only,,current,,The number of output error octets about the port. The unit is byte.
.1.3.6.1.4.1.11.2.14.11.15.2.42.1.5.31.1.10,HPN-ICF-EPON-MIB::hpnicfOnuRS485RXErrOctets,Integer32,read-only,,current,,The number of input error octets about the port. The unit is byte.
.1.3.6.1.4.1.11.2.14.11.15.2.42.1.5.31.1.11,HPN-ICF-EPON-MIB::hpnicfOnuRS485ResetStatistics,INTEGER,read-write,,current,counting(1):clear(2),Reset the counters to zero, including hpnicfOnuRS485TXOctets, hpnicfOnuRS485RXOctets, hpnicfOnuRS485TXErrOctets and hpnicfOnuRS485RXErrOctets.
.1.3.6.1.4.1.11.2.14.11.15.2.42.1.5.32,HPN-ICF-EPON-MIB::hpnicfOnuRS485SessionSummaryTable,,not-accessible,,current,,Session summary table.
.1.3.6.1.4.1.11.2.14.11.15.2.42.1.5.32.1,HPN-ICF-EPON-MIB::hpnicfOnuRS485SessionSummaryEntry,,not-accessible,ifIndex:hpnicfOnuRS485SerialIndex,current,,The entry of session summary table.
.1.3.6.1.4.1.11.2.14.11.15.2.42.1.5.32.1.1,HPN-ICF-EPON-MIB::hpnicfOnuRS485SessionMaxNum,Integer32,read-only,,current,,The max session number of every serial port which can be supported.
.1.3.6.1.4.1.11.2.14.11.15.2.42.1.5.32.1.2,HPN-ICF-EPON-MIB::hpnicfOnuRS485SessionNextIndex,Integer32,read-only,,current,,The next valid index used for creating a new session raw. When there is no valid index left, it will return 0. 
.1.3.6.1.4.1.11.2.14.11.15.2.42.1.5.33,HPN-ICF-EPON-MIB::hpnicfOnuRS485SessionTable,,not-accessible,,current,,RS485 raw session table. Data received from RS485 will be sent to the destination by raw sockets. 
.1.3.6.1.4.1.11.2.14.11.15.2.42.1.5.33.1,HPN-ICF-EPON-MIB::hpnicfOnuRS485SessionEntry,,not-accessible,ifIndex:hpnicfOnuRS485SerialIndex:hpnicfOnuRS485SessionIndex,current,,The entry of session table.
.1.3.6.1.4.1.11.2.14.11.15.2.42.1.5.33.1.1,HPN-ICF-EPON-MIB::hpnicfOnuRS485SessionIndex,Integer32,not-accessible,,current,,Raw session index.
.1.3.6.1.4.1.11.2.14.11.15.2.42.1.5.33.1.2,HPN-ICF-EPON-MIB::hpnicfOnuRS485SessionType,INTEGER,read-create,,current,udp(1):tcpClient(2):tcpServer(3),The type of a session. A session can use UDP socket, TCP socket as a client, or TCP socket as a server.
.1.3.6.1.4.1.11.2.14.11.15.2.42.1.5.33.1.3,HPN-ICF-EPON-MIB::hpnicfOnuRS485SessionAddType,INTEGER,read-create,,current,unknown(0):ipv4(1):ipv6(2):ipv4z(3):ipv6z(4):dns(16),This object indicates the transport type of the address contained in hpnicfOnuRS485SessionRemoteIP object.
.1.3.6.1.4.1.11.2.14.11.15.2.42.1.5.33.1.4,HPN-ICF-EPON-MIB::hpnicfOnuRS485SessionRemoteIP,OCTET,read-create,,current,,The IP of remote landing. When session type is 'udp', this is the peer IP. When session type is 'tcpClient', this is the server IP. When session type is 'tcpServer', this is invalid. 
.1.3.6.1.4.1.11.2.14.11.15.2.42.1.5.33.1.5,HPN-ICF-EPON-MIB::hpnicfOnuRS485SessionRemotePort,Integer32,read-create,,current,,The port of remote landing. When session type is 'udp', this is the peer port. When session type is 'tcpClient', this is the server port. When session type is 'tcpServer', this is invalid. 
.1.3.6.1.4.1.11.2.14.11.15.2.42.1.5.33.1.6,HPN-ICF-EPON-MIB::hpnicfOnuRS485SessionLocalPort,Integer32,read-create,,current,,Local socket port. When session type is 'udp', this is local UDP socket port. When session type is 'tcpClient', this is invalid. When session type is 'tcpServer', this is the local port which will be listened. 
.1.3.6.1.4.1.11.2.14.11.15.2.42.1.5.33.1.7,HPN-ICF-EPON-MIB::hpnicfOnuRS485SessionRowStatus,INTEGER,read-create,,current,active(1):notInService(2):notReady(3):createAndGo(4):createAndWait(5):destroy(6),The status used for creating, modifying, and deleting instances of the columnar objects in raw session table.
.1.3.6.1.4.1.11.2.14.11.15.2.42.1.5.34,HPN-ICF-EPON-MIB::hpnicfOnuRS485SessionErrInfoTable,,not-accessible,,current,,Error information table. When failed to create a session, error information can be got from this table.
.1.3.6.1.4.1.11.2.14.11.15.2.42.1.5.34.1,HPN-ICF-EPON-MIB::hpnicfOnuRS485SessionErrInfoEntry,,not-accessible,ifIndex:hpnicfOnuRS485SerialIndex:hpnicfOnuRS485SessionIndex,current,,The entry of error information table.
.1.3.6.1.4.1.11.2.14.11.15.2.42.1.5.34.1.1,HPN-ICF-EPON-MIB::hpnicfOnuRS485SessionErrInfo,OCTET,read-only,,current,,Error information string. When a response with 'noCreeation' for row creation in table hpnicfOnuRS485SessionTable, the error reason can be got from this object.
.1.3.6.1.4.1.11.2.14.11.15.2.42.1.6,HPN-ICF-EPON-MIB::hpnicfEponBatchOperationMan,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.2.42.1.6.1,HPN-ICF-EPON-MIB::hpnicfEponBatchOperationBySlotTable,,not-accessible,,current,, This table is used for batch operation by slot. 
.1.3.6.1.4.1.11.2.14.11.15.2.42.1.6.1.1,HPN-ICF-EPON-MIB::hpnicfEponBatchOperationBySlotEntry,,not-accessible,hpnicfEponBatchOperationBySlotIndex,current,, The entry of the hpnicfEponBatchOperationBySlotTable. 
.1.3.6.1.4.1.11.2.14.11.15.2.42.1.6.1.1.1,HPN-ICF-EPON-MIB::hpnicfEponBatchOperationBySlotIndex,Integer32,not-accessible,,current,, The EPON board index. 
.1.3.6.1.4.1.11.2.14.11.15.2.42.1.6.1.1.2,HPN-ICF-EPON-MIB::hpnicfEponBatchOperationBySlotType,INTEGER,read-write,,current,resetUnknown(1):updateDba(9):updateONU(10), The types of batch operation by slot: 1 - resetUnknown, the object value is not set. 9 - updateDba, update OLT DBA algorithm. Config the MIB object module hpnicfEponDbaUpdateFileName. 10 - updateONU, update ONU firmware. Config the MIB object module hpnicfEponOnuUpdateFileName with the filename of ONU firmware first. 
.1.3.6.1.4.1.11.2.14.11.15.2.42.1.6.1.1.3,HPN-ICF-EPON-MIB::hpnicfEponBatchOperationBySlot,INTEGER,read-write,,current,batOpBySlot(1), Execute batch operation. 
.1.3.6.1.4.1.11.2.14.11.15.2.42.1.6.1.1.4,HPN-ICF-EPON-MIB::hpnicfEponBatchOperationBySlotResult,Integer32,read-only,,current,, The result of batch operation. 0xFFFF - other, general error. 1 - working, operation is not completed. 2 - successful, completed successfully. 3 - failed because the DBA source file does not exist. 4 - failed because the ONU firmware file does not exist. 5 - failed because of not set the filename of DBA source. 6 - failed because of not set the filename of ONU firmware. 7 - failed because of not set slottype. 
.1.3.6.1.4.1.11.2.14.11.15.2.42.1.6.2,HPN-ICF-EPON-MIB::hpnicfEponBatchOperationByOLTTable,,not-accessible,,current,, This table is used for batch operation by OLT. 
.1.3.6.1.4.1.11.2.14.11.15.2.42.1.6.2.1,HPN-ICF-EPON-MIB::hpnicfEponBatchOperationByOLTEntry,,not-accessible,ifIndex,current,, The entry of the hpnicfEponBatchOperationByOLTTable. 
.1.3.6.1.4.1.11.2.14.11.15.2.42.1.6.2.1.1,HPN-ICF-EPON-MIB::hpnicfEponBatchOperationByOLTType,INTEGER,read-write,,current,resetUnknown(1):updateONU(5), The types of batch operation by OLT(operation for all ONUs in the OLT): 1 -- resetUnknown, the object value is not set. 5 -- updateONU, update ONU firmware. configure the MIB object module hpnicfEponOnuUpdateFileName with the filename of ONU firmware first. 
.1.3.6.1.4.1.11.2.14.11.15.2.42.1.6.2.1.2,HPN-ICF-EPON-MIB::hpnicfEponBatchOperationByOLT,INTEGER,read-write,,current,batOpByOlt(1), Execute batch operation. 
.1.3.6.1.4.1.11.2.14.11.15.2.42.1.6.2.1.3,HPN-ICF-EPON-MIB::hpnicfEponBatchOperationByOLTResult,Integer32,read-only,,current,, The result of batch operation: 0xFFFF -- other, gernal error. 1 -- working, operation is not completed. 2 -- successful, operation completed successfully. 4 -- failed because the ONU firmware file does not exist. 6 -- failed because of not set the filename of ONU firmware. 7 -- failed because of not set olttype. 
.1.3.6.1.4.1.11.2.14.11.15.2.42.1.6.3,HPN-ICF-EPON-MIB::hpnicfOnuFirmwareUpdateByTypeTable,,not-accessible,,current,, This table is used to update ONU by ONU type. 
.1.3.6.1.4.1.11.2.14.11.15.2.42.1.6.3.1,HPN-ICF-EPON-MIB::hpnicfOnuFirmwareUpdateByTypeEntry,,not-accessible,hpnicfOnuUpdateByOnuTypeIndex,current,, The entry of the hpnicfOnuFirmwareUpdateByTypeTable. 
.1.3.6.1.4.1.11.2.14.11.15.2.42.1.6.3.1.1,HPN-ICF-EPON-MIB::hpnicfOnuUpdateByOnuTypeIndex,Integer32,not-accessible,,current,, The type and file relationship table entry index. 
.1.3.6.1.4.1.11.2.14.11.15.2.42.1.6.3.1.2,HPN-ICF-EPON-MIB::hpnicfOnuUpdateByTypeOnuType,OCTET,read-create,,current,, The type of ONUs. 
.1.3.6.1.4.1.11.2.14.11.15.2.42.1.6.3.1.3,HPN-ICF-EPON-MIB::hpnicfOnuUpdateByTypeFileName,OCTET,read-create,,current,, The file to be updated for the type of ONUs. 
.1.3.6.1.4.1.11.2.14.11.15.2.42.1.6.3.1.4,HPN-ICF-EPON-MIB::hpnicfOnuUpdateByTypeRowStatus,INTEGER,read-create,,current,active(1):notInService(2):notReady(3):createAndGo(4):createAndWait(5):destroy(6), The status of this table entry. Only createAndGo and destroy actions are supported. 
.1.3.6.1.4.1.11.2.14.11.15.2.42.1.7,HPN-ICF-EPON-MIB::hpnicfEponErrorInfo,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.2.42.1.7.1,HPN-ICF-EPON-MIB::hpnicfEponSoftwareErrorCode,Integer32,accessible-for-notify,,current,, OLT software error code. 
.1.3.6.1.4.1.11.2.14.11.15.2.42.1.7.2,HPN-ICF-EPON-MIB::hpnicfOamVendorSpecificAlarmCode,Integer32,accessible-for-notify,,current,, Alarm code of the vendor. 
.1.3.6.1.4.1.11.2.14.11.15.2.42.1.7.3,HPN-ICF-EPON-MIB::hpnicfEponOnuRegErrorMacAddr,OCTET,accessible-for-notify,,current,, The MAC of ONU registered error. 
.1.3.6.1.4.1.11.2.14.11.15.2.42.1.7.4,HPN-ICF-EPON-MIB::hpnicfOamEventLogType,Unsigned32,accessible-for-notify,,current,, The type of event that generated this entry in the event log. 
.1.3.6.1.4.1.11.2.14.11.15.2.42.1.7.5,HPN-ICF-EPON-MIB::hpnicfOamEventLogLocation,INTEGER,accessible-for-notify,,current,local(1):remote(2), Whether this event occurred locally, or was received from the OAM peer via Ethernet OAM. 
.1.3.6.1.4.1.11.2.14.11.15.2.42.1.7.6,HPN-ICF-EPON-MIB::hpnicfEponLoopbackPortIndex,Integer32,accessible-for-notify,,current,, The index of port which generate loop back event. 
.1.3.6.1.4.1.11.2.14.11.15.2.42.1.7.7,HPN-ICF-EPON-MIB::hpnicfEponLoopbackPortDescr,OCTET,accessible-for-notify,,current,, A textual string containing information about the port generated loop back event. 
.1.3.6.1.4.1.11.2.14.11.15.2.42.1.7.8,HPN-ICF-EPON-MIB::hpnicfOltPortAlarmLlidMisFrames,Unsigned32,accessible-for-notify,,current,, the amount of mismatched frames about the LLID mismatch alarm. 
.1.3.6.1.4.1.11.2.14.11.15.2.42.1.7.9,HPN-ICF-EPON-MIB::hpnicfOltPortAlarmBer,Unsigned32,accessible-for-notify,,current,, error bit rate. 
.1.3.6.1.4.1.11.2.14.11.15.2.42.1.7.10,HPN-ICF-EPON-MIB::hpnicfOltPortAlarmFer,Unsigned32,accessible-for-notify,,current,, error frames rate. 
.1.3.6.1.4.1.11.2.14.11.15.2.42.1.7.11,HPN-ICF-EPON-MIB::hpnicfEponOnuRegSilentMac,OCTET,accessible-for-notify,,current,, The MAC of silent ONU. 
.1.3.6.1.4.1.11.2.14.11.15.2.42.1.7.12,HPN-ICF-EPON-MIB::hpnicfEponOperationResult,OCTET,accessible-for-notify,,current,, The result of EPON operation. 
.1.3.6.1.4.1.11.2.14.11.15.2.42.1.7.13,HPN-ICF-EPON-MIB::hpnicfEponOnuLaserState,INTEGER,accessible-for-notify,,current,normal(1):laserAlwaysOn(2):signalDegradation(3):endOfLife(4), The state of ONU laser. 
.1.3.6.1.4.1.11.2.14.11.15.2.42.1.8,HPN-ICF-EPON-MIB::hpnicfEponTrap,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.2.42.1.8.0,HPN-ICF-EPON-MIB::hpnicfEponTrapPrefix,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.2.42.1.8.0.1,HPN-ICF-EPON-MIB::hpnicfEponPortAlarmBerTrap,,,,,, A hpnicfEponPortAlarmBerTrap notification is sent when a BER threshold crossing event is detected. 
.1.3.6.1.4.1.11.2.14.11.15.2.42.1.8.0.2,HPN-ICF-EPON-MIB::hpnicfEponPortAlarmFerTrap,,,,,, A hpnicfEponPortAlarmFerTrap notification is sent when a frame error rate threshold crossing event is detected. 
.1.3.6.1.4.1.11.2.14.11.15.2.42.1.8.0.3,HPN-ICF-EPON-MIB::hpnicfEponErrorLLIDFrameTrap,,,,,, A hpnicfEponErrorLLIDFrameTrap notification is sent when a LLID mismatched frames rate threshold crossing event is detected. 
.1.3.6.1.4.1.11.2.14.11.15.2.42.1.8.0.4,HPN-ICF-EPON-MIB::hpnicfEponLoopBackEnableTrap,,,,,, A hpnicfEponLoopBackEnableTrap notification is sent when the loop back command is committed. 
.1.3.6.1.4.1.11.2.14.11.15.2.42.1.8.0.5,HPN-ICF-EPON-MIB::hpnicfEponOnuRegistrationErrTrap,,,,,, A hpnicfEponOnuRegistrationErrTrap notification is sent when a ONU register failed. 
.1.3.6.1.4.1.11.2.14.11.15.2.42.1.8.0.6,HPN-ICF-EPON-MIB::hpnicfEponOamDisconnectionTrap,,,,,, A hpnicfEponOamDisconnectionTrap notification is sent when LLID's OAM link is disconnected. 
.1.3.6.1.4.1.11.2.14.11.15.2.42.1.8.0.7,HPN-ICF-EPON-MIB::hpnicfEponEncryptionKeyErrTrap,,,,,, A hpnicfEponEncryptionKeyErrTrap notification is sent when LLID's encryption key is bad. 
.1.3.6.1.4.1.11.2.14.11.15.2.42.1.8.0.8,HPN-ICF-EPON-MIB::hpnicfEponRemoteStableTrap,,,,,, A hpnicfEponRemoteStableTrap notification is sent when remote Data Terminal Equipment(DTE) has not seen or is unsatisfied with local state information. 
.1.3.6.1.4.1.11.2.14.11.15.2.42.1.8.0.9,HPN-ICF-EPON-MIB::hpnicfEponLocalStableTrap,,,,,, A hpnicfEponLocalStableTrap notification is sent when DTE has not seen or is unsatisfied with remote state information. 
.1.3.6.1.4.1.11.2.14.11.15.2.42.1.8.0.10,HPN-ICF-EPON-MIB::hpnicfEponOamVendorSpecificTrap,,,,,, A hpnicfEponOamVendorSpecificTrap notification is sent when system vendor specific OAM alarm raised. 
.1.3.6.1.4.1.11.2.14.11.15.2.42.1.8.0.11,HPN-ICF-EPON-MIB::hpnicfEponSoftwareErrTrap,,,,,, A hpnicfEponSoftwareErrTrap notification is sent when a PAS-SOFT internal error occurs. 
.1.3.6.1.4.1.11.2.14.11.15.2.42.1.8.0.12,HPN-ICF-EPON-MIB::hpnicfEponPortAlarmBerRecoverTrap,,,,,, A hpnicfEponPortAlarmBerRecoverTrap notification is sent when a BER threshold crossing event is detected and then recovered. 
.1.3.6.1.4.1.11.2.14.11.15.2.42.1.8.0.13,HPN-ICF-EPON-MIB::hpnicfEponPortAlarmFerRecoverTrap,,,,,, A hpnicfEponPortAlarmFerRecoverTrap notification is sent when a frame error rate threshold crossing event is detected and then recoverd. 
.1.3.6.1.4.1.11.2.14.11.15.2.42.1.8.0.14,HPN-ICF-EPON-MIB::hpnicfEponErrorLLIDFrameRecoverTrap,,,,,, A hpnicfEponErrorLLIDFrameRecoverTrap notification is sent when a LLID mismatched frames rate threshold crossing event is detected and then recoverd. 
.1.3.6.1.4.1.11.2.14.11.15.2.42.1.8.0.15,HPN-ICF-EPON-MIB::hpnicfEponLoopBackEnableRecoverTrap,,,,,, A hpnicfEponLoopBackEnableRecoverTrap notification is sent when the loop back is detected and then recoverd. 
.1.3.6.1.4.1.11.2.14.11.15.2.42.1.8.0.16,HPN-ICF-EPON-MIB::hpnicfEponOnuRegistrationErrRecoverTrap,,,,,, A hpnicfEponOnuRegistrationErrRecoverTrap notification is sent when an ONU register failed and then register successful again. 
.1.3.6.1.4.1.11.2.14.11.15.2.42.1.8.0.17,HPN-ICF-EPON-MIB::hpnicfEponOamDisconnectionRecoverTrap,,,,,, A hpnicfEponOamDisconnectionRecoverTrap notification is sent when LLID's OAM link is disconnected and then connected. 
.1.3.6.1.4.1.11.2.14.11.15.2.42.1.8.0.18,HPN-ICF-EPON-MIB::hpnicfEponEncryptionKeyErrRecoverTrap,,,,,, A hpnicfEponEncryptionKeyErrRecoverTrap notification is sent when LLID's encryption key is bad and then right. 
.1.3.6.1.4.1.11.2.14.11.15.2.42.1.8.0.19,HPN-ICF-EPON-MIB::hpnicfEponRemoteStableRecoverTrap,,,,,, A hpnicfEponRemoteStableRecoverTrap notification is sent when remote DTE has not seen or is unsatisfied with local state information and then is realized. 
.1.3.6.1.4.1.11.2.14.11.15.2.42.1.8.0.20,HPN-ICF-EPON-MIB::hpnicfEponLocalStableRecoverTrap,,,,,, A hpnicfEponLocalStableRecoverTrap notification is sent when DTE has not seen or is unsatisfied with remote state information and then is realized. 
.1.3.6.1.4.1.11.2.14.11.15.2.42.1.8.0.21,HPN-ICF-EPON-MIB::hpnicfEponOamVendorSpecificRecoverTrap,,,,,, A hpnicfEponOamVendorSpecificRecoverTrap notification is sent when system vendor specific OAM alarm is detected and then recovered. 
.1.3.6.1.4.1.11.2.14.11.15.2.42.1.8.0.22,HPN-ICF-EPON-MIB::hpnicfEponSoftwareErrRecoverTrap,,,,,, A hpnicfEponSoftwareErrRecoverTrap notification is sent when a PAS-SOFT internal error is detected and then recovered. 
.1.3.6.1.4.1.11.2.14.11.15.2.42.1.8.0.23,HPN-ICF-EPON-MIB::hpnicfDot3OamThresholdRecoverEvent,,,,,, A hpnicfDot3OamThresholdRecoverEvent notification is sent when hpnicfDot3OamThresholdEvent is detected and then recoverd. 
.1.3.6.1.4.1.11.2.14.11.15.2.42.1.8.0.24,HPN-ICF-EPON-MIB::hpnicfDot3OamNonThresholdRecoverEvent,,,,,, A hpnicfDot3OamNonThresholdRecoverEvent notification is sent when hpnicfDot3OamNonThresholdEvent is detected and then recoverd. 
.1.3.6.1.4.1.11.2.14.11.15.2.42.1.8.0.25,HPN-ICF-EPON-MIB::hpnicfEponOnuRegExcessTrap,,,,,, A hpnicfEponOnuRegExcessTrap notification is sent when the number of registered ONUs exceeds the limit. 
.1.3.6.1.4.1.11.2.14.11.15.2.42.1.8.0.26,HPN-ICF-EPON-MIB::hpnicfEponOnuRegExcessRecoverTrap,,,,,, A hpnicfEponOnuRegExcessRecoverTrap notification is sent when hpnicfEponOnuRegExcessTrap is detected and then recoverd. 
.1.3.6.1.4.1.11.2.14.11.15.2.42.1.8.0.27,HPN-ICF-EPON-MIB::hpnicfEponOnuPowerOffTrap,,,,,, A hpnicfEponOnuPowerOffTrap notification is sent when ONU is power off. 
.1.3.6.1.4.1.11.2.14.11.15.2.42.1.8.0.28,HPN-ICF-EPON-MIB::hpnicfEponOltSwitchoverTrap,,,,,, A hpnicfEponOltSwithoverTrap notification is sent when OLT switchover is detected. 
.1.3.6.1.4.1.11.2.14.11.15.2.42.1.8.0.29,HPN-ICF-EPON-MIB::hpnicfEponOltDFETrap,,,,,, A hpnicfEponOltDFETrap notification is sent when there was a serious problem(device fatal error) on OLT. 
.1.3.6.1.4.1.11.2.14.11.15.2.42.1.8.0.30,HPN-ICF-EPON-MIB::hpnicfEponOltDFERecoverTrap,,,,,, A hpnicfEponOltDFERecoverTrap notification is sent when device fatal error is detected and then recoverd. 
.1.3.6.1.4.1.11.2.14.11.15.2.42.1.8.0.31,HPN-ICF-EPON-MIB::hpnicfEponOnuSilenceTrap,,,,,, The hpnicfEponOnuSilenceTrap notification is sent when an unbound ONU try to register to an OLT. 
.1.3.6.1.4.1.11.2.14.11.15.2.42.1.8.0.32,HPN-ICF-EPON-MIB::hpnicfEponOnuSilenceRecoverTrap,,,,,, The hpnicfEponOnuSilenceRecoverTrap notification is sent when a silent ONU is bound in the OLT or the aging onu mac address is timeout. 
.1.3.6.1.4.1.11.2.14.11.15.2.42.1.8.0.33,HPN-ICF-EPON-MIB::hpnicfEponOnuUpdateResultTrap,,,,,, A hpnicfEponUpdateResultTrap notification is sent when an ONU reported its firmware update result. 
.1.3.6.1.4.1.11.2.14.11.15.2.42.1.8.0.34,HPN-ICF-EPON-MIB::hpnicfEponOnuAutoBindTrap,,,,,, A hpnicfEponOnuAutoBindTrap notification is sent when a silent ONU is bound automatically. 
.1.3.6.1.4.1.11.2.14.11.15.2.42.1.8.0.35,HPN-ICF-EPON-MIB::hpnicfEponOnuPortStpStateTrap,,,,,, A hpnicfEponOnuPortStpStateTrap notification is sent when a port turns into another state in STP environment. 
.1.3.6.1.4.1.11.2.14.11.15.2.42.1.8.0.36,HPN-ICF-EPON-MIB::hpnicfEponOnuLaserFailedTrap,,,,,, A hpnicfEponOnuLaserFailedTrap notification is sent when an ONU has trouble with laser, such as laser constantly turned on, signal degradation or optics EOL (End of Life). 
.1.3.6.1.4.1.11.2.14.11.15.2.42.1.8.0.37,HPN-ICF-EPON-MIB::hpnicfOnuSmlkSwitchoverTrap,,,,,, A hpnicfOnuSmlkSwitchoverTrap notification is sent when an ONU SMLK switchover is detected. 
.1.3.6.1.4.1.11.2.14.11.15.2.42.1.9,HPN-ICF-EPON-MIB::hpnicfEponStat,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.2.42.1.9.1,HPN-ICF-EPON-MIB::hpnicfEponStatTable,,not-accessible,,current,, This table contains line code error statistics of epon port. 
.1.3.6.1.4.1.11.2.14.11.15.2.42.1.9.1.1,HPN-ICF-EPON-MIB::hpnicfEponStatEntry,,not-accessible,ifIndex,current,, The entry of hpnicfEponStatTable. 
.1.3.6.1.4.1.11.2.14.11.15.2.42.1.9.1.1.1,HPN-ICF-EPON-MIB::hpnicfEponStatFER,Counter64,read-only,,current,, The frame error rate of epon port, measured in 1e-9 unit. 
.1.3.6.1.4.1.11.2.14.11.15.2.42.1.9.1.1.2,HPN-ICF-EPON-MIB::hpnicfEponStatBER,Counter64,read-only,,current,, The bit error rate of epon port, measured in 1e-9 unit. 
.1.3.6.1.4.1.11.2.14.11.15.2.42.2,HPN-ICF-DOT3-EFM-EPON-MIB::hpnicfDot3EfmeponMIB,,,,,,The objects in this MIB module are used to manage the Ethernet in the First Mile (EFM) Multi Point Control Protocol (MPCP) Interfaces as defined in IEEE Draft P802.3ah/D3.0 clause 64,65. The following reference is used throughout this MIB module: [802.3ah] refers to: IEEE Draft P802.3ah/D3.3: 'Draft amendment to - Information technology - Telecommunications and information exchange between systems - Local and metropolitan area networks - Specific requirements - Part 3: Carrier sense multiple access with collision detection (CSMA/CD) access method and physical layer specifications - Media Access Control Parameters, Physical Layers and Management Parameters for subscriber access networks', 22 April 2004. Of particular interest are Clause 64(MPCP) 65(P2MP RS) and 60 (PON PMDs). Clause 30, 'Management', and Clause 45, 'Management Data Input/Output (MDIO) Interface'. Copyright (C) The Internet Society (2004). This version of this MIB module is part of XXXX see the RFC itself for full legal notices.
.1.3.6.1.4.1.11.2.14.11.15.2.42.2.1,HPN-ICF-DOT3-EFM-EPON-MIB::hpnicfDot3MpcpMIB,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.2.42.2.1.1,HPN-ICF-DOT3-EFM-EPON-MIB::hpnicfDot3MpcpObjects,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.2.42.2.1.1.1,HPN-ICF-DOT3-EFM-EPON-MIB::hpnicfDot3MpcpTable,,not-accessible,,current,,Table for dot3 Multi-Point Control Protocol (MPCP) MIB modules.
.1.3.6.1.4.1.11.2.14.11.15.2.42.2.1.1.1.1,HPN-ICF-DOT3-EFM-EPON-MIB::hpnicfDot3MpcpEntry,,not-accessible,ifIndex,current,,An entry in the dot3 MPCP MIB modules table.
.1.3.6.1.4.1.11.2.14.11.15.2.42.2.1.1.1.1.1,HPN-ICF-DOT3-EFM-EPON-MIB::hpnicfDot3MpcpID,Integer32,read-only,,current,,This variable is assigned so as to uniquely identify the Multi-Point MAC Control (MPCP) entity, as defined in [802.3ah] clause 64, among the subordinate managed objects of the containing object. This attribute is relevant for an OLT and an ONU.
.1.3.6.1.4.1.11.2.14.11.15.2.42.2.1.1.1.1.2,HPN-ICF-DOT3-EFM-EPON-MIB::hpnicfDot3MpcpOperStatus,INTEGER,read-only,,current,true(1):false(2),This variable can be used to define the operational state of the Multi-Point MAC Control sublayer as defined in [802.3ah] clause 64. Selecting admin for an interface with Multi-Point MAC Control sublayer. When the attribute is True the the interface will act as if Multi-point control protocol is enabled. When the attribute is False the interface will act as if it does not have the Multi-point control protocol. The operational state can be changed using the hpnicfDot3MpcpAdminState attribute. This attribute is relevant for an OLT and an ONU.
.1.3.6.1.4.1.11.2.14.11.15.2.42.2.1.1.1.1.3,HPN-ICF-DOT3-EFM-EPON-MIB::hpnicfDot3MpcpMode,INTEGER,read-write,,current,olt(1):onu(2),This variable can be used to identify the operational state of the Multi-Point MAC Control sublayer as defined in [802.3ah] clause 64. Selecting olt(1) for an OLT (server) mode and onu(2) for an ONU (client) mode. Writing can be done during only during initialization, when hpnicfDot3MpcpOperStatus indicates Flase. This attribute is relevant for an OLT and an ONU.
.1.3.6.1.4.1.11.2.14.11.15.2.42.2.1.1.1.1.4,HPN-ICF-DOT3-EFM-EPON-MIB::hpnicfDot3MpcpLinkID,Integer32,read-only,,current,,A read-only value that identifies the Logical Link identity (LLID) associated with the MAC port as specified in [802.3ah] clause 65.1.3.2.2. This attribute is relevant for an OLT and an ONU.
.1.3.6.1.4.1.11.2.14.11.15.2.42.2.1.1.1.1.5,HPN-ICF-DOT3-EFM-EPON-MIB::hpnicfDot3MpcpRemoteMACAddress,OCTET,read-only,,current,,A read-only value that identifies the source_address parameter of the last MPCPDUs passed to the MAC Control. This value is updated on reception of a valid frame with (1) a destination Field equal to the reserved multicast address for MAC Control specified in [802.3ah] Annex 31A, (2) lengthOrType field value equal to the reserved Type for MAC Control as specified in [802.3ah] Annex 31A. (3) an MPCP subtype value equal to the subtype reserved for MPCP as specified in [802.3ah] Annex 31A. This attribute is relevant for an OLT and an ONU.
.1.3.6.1.4.1.11.2.14.11.15.2.42.2.1.1.1.1.6,HPN-ICF-DOT3-EFM-EPON-MIB::hpnicfDot3MpcpRegistrationState,INTEGER,read-only,,current,unregistered(1):registering(2):registered(3),A read-only value that identifies the operational state of the Multi-Point MAC Control sublayer as defined in [802.3ah] clause 64. When this attribute has the enumeration unregistered(1) the interface may be used for registering a link partner. When this attribute has the enumeration registering(2) the interface is in the process of registering a link-partner. When this attribute has the enumeration registered(3) the interface has an established link-partner. This attribute is relevant for an OLT and an ONU. For the OLT it provides an indication per LLID.
.1.3.6.1.4.1.11.2.14.11.15.2.42.2.1.1.1.1.7,HPN-ICF-DOT3-EFM-EPON-MIB::hpnicfDot3MpcpTransmitElapsed,Integer32,read-only,,current,,A read-only value that reports the interval from last MPCP frame transmission in increments of Time Quanta (TQ) 16ns. The value returned shall be (interval from last MPCP frame transmission in ns)/16. If this value exceeds (2^32-1) the value (2^32-1) shall be returned. This attribute is relevant for an OLT and an ONU.
.1.3.6.1.4.1.11.2.14.11.15.2.42.2.1.1.1.1.8,HPN-ICF-DOT3-EFM-EPON-MIB::hpnicfDot3MpcpReceiveElapsed,Integer32,read-only,,current,,A read-only value that reports the interval from last MPCP frame reception in increments of Time Quanta (TQ) 16ns. The value returned shall be (interval from last MPCP last MPCP frame reception in ns)/16. If this value exceeds (2^32-1) the value (2^32-1) shall be returned. This attribute is relevant for an OLT and an ONU.
.1.3.6.1.4.1.11.2.14.11.15.2.42.2.1.1.1.1.9,HPN-ICF-DOT3-EFM-EPON-MIB::hpnicfDot3MpcpRoundTripTime,Integer32,read-only,,current,,A read-only value that reports the MPCP round trip time in increments of Time Quanta (TQ) 16ns. The value returned shall be (round trip time in ns)/16. If this value exceeds (2^16-1) the value (2^16-1) shall be returned. This attribute is relevant for an OLT and an ONU. For the OLT there is a value per LLID
.1.3.6.1.4.1.11.2.14.11.15.2.42.2.1.1.1.1.10,HPN-ICF-DOT3-EFM-EPON-MIB::hpnicfDot3MpcpMaximumPendingGrants,Integer32,read-only,,current,,A read-only value that indicates the maximum number of grants an ONU can store. The maximum number of grants an ONU can store has a range of 0 to 255. This attribute is relevant for an OLT and an ONU. For the OLT there is a value per LLID
.1.3.6.1.4.1.11.2.14.11.15.2.42.2.1.1.1.1.11,HPN-ICF-DOT3-EFM-EPON-MIB::hpnicfDot3MpcpAdminState,INTEGER,read-write,,current,true(1):false(2),This variable can be used to define the operational state of the Multi-Point MAC Control sublayer as defined in [802.3ah] clause 64. Selecting admin for an interface with Multi-Point MAC Control sublayer. When selecting the value as True the interface Multi-Point control protocol is enabled. When selecting the value as False the interface acts as if the Multi-point Control protocol does not exist. Reading reflects the state of the attribute and the operation of the Multi-point control protocol mode of the interface. Writing can be done all the time. This attribute is relevant for an OLT and an ONU.
.1.3.6.1.4.1.11.2.14.11.15.2.42.2.1.1.1.1.12,HPN-ICF-DOT3-EFM-EPON-MIB::hpnicfDot3MpcpOnTime,Integer32,read-only,,current,,A read-only value that reports the -on time- for a grant burst in increments of Time Quanta (TQ) 16ns as defined in [802.3ah] 60,64. The value returned shall be (on time ns)/16. If this value exceeds (2^32-1) the value (2^32-1) shall be returned. This attribute is relevant for an OLT and an ONU.
.1.3.6.1.4.1.11.2.14.11.15.2.42.2.1.1.1.1.13,HPN-ICF-DOT3-EFM-EPON-MIB::hpnicfDot3MpcpOffTime,Integer32,read-only,,current,,A read-only value that reports the -off time- for a grant burst in increments of Time Quanta (TQ) 16ns as defined in [802.3ah] 60,64. The value returned shall be (off time ns)/16. If this value exceeds (2^32-1) the value (2^32-1) shall be returned. This attribute is relevant for an OLT and an ONU.
.1.3.6.1.4.1.11.2.14.11.15.2.42.2.1.1.1.1.14,HPN-ICF-DOT3-EFM-EPON-MIB::hpnicfDot3MpcpSyncTime,Integer32,read-only,,current,,A read-only value that reports the -sync lock time- for an OLT receiver in increments of Time Quanta (TQ) 16ns as defined in [802.3ah] 60,64,65. The value returned shall be (sync lock time ns)/16. If this value exceeds (2^32-1) the value (2^32-1) shall be returned. This attribute is relevant for an OLT and an ONU.
.1.3.6.1.4.1.11.2.14.11.15.2.42.2.1.1.2,HPN-ICF-DOT3-EFM-EPON-MIB::hpnicfDot3MpcpStatTable,,not-accessible,,current,,This table defines the list of statistics counters of [802.3ah] clause 64 MPCP interface.
.1.3.6.1.4.1.11.2.14.11.15.2.42.2.1.1.2.1,HPN-ICF-DOT3-EFM-EPON-MIB::hpnicfDot3MpcpStatEntry,,not-accessible,ifIndex,current,,Table entries for table of statistics counters of [802.3ah] clause 64 MPCP interface.
.1.3.6.1.4.1.11.2.14.11.15.2.42.2.1.1.2.1.1,HPN-ICF-DOT3-EFM-EPON-MIB::hpnicfDot3MpcpMACCtrlFramesTransmitted,Counter32,read-only,,current,,A count of MPCP frames passed to the MAC sublayer for transmission. This counter is incremented when a MA_CONTROL.request service primitive is generated within the MAC control sublayer with an opcode indicating a MPCP frame. This attribute is relevant for an OLT and an ONU.
.1.3.6.1.4.1.11.2.14.11.15.2.42.2.1.1.2.1.2,HPN-ICF-DOT3-EFM-EPON-MIB::hpnicfDot3MpcpMACCtrlFramesReceived,Counter32,read-only,,current,,A count of MPCP frames passed by the MAC sublayer to the MAC Control sublayer. This counter is incremented when a ReceiveFrame function call returns a valid frame with: (1) a lengthOrType field value equal to the reserved Type for 802.3_MAC_Control as specified in 31.4.1.3, and (2) an opcode indicating a MPCP frame. This attribute is relevant for an OLT and an ONU.
.1.3.6.1.4.1.11.2.14.11.15.2.42.2.1.1.2.1.3,HPN-ICF-DOT3-EFM-EPON-MIB::hpnicfDot3MpcpDiscoveryWindowsSent,Counter32,read-only,,current,,A count of discovery windows generated. The counter is incremented by one for each generated discovery window. This attribute is relevant for an OLT and an ONU. At the ONU value should be zero.
.1.3.6.1.4.1.11.2.14.11.15.2.42.2.1.1.2.1.4,HPN-ICF-DOT3-EFM-EPON-MIB::hpnicfDot3MpcpDiscoveryTimeout,Counter32,read-only,,current,,A count of the number of times a discovery timeout occurs. Increment the counter by one for each discovery processing state-machine reset resulting from timeout waiting for message arrival. This attribute is relevant for an OLT and an ONU.
.1.3.6.1.4.1.11.2.14.11.15.2.42.2.1.1.2.1.5,HPN-ICF-DOT3-EFM-EPON-MIB::hpnicfDot3MpcpTxRegRequest,Counter32,read-only,,current,,A count of the number of times a REGISTER_REQ MPCP frames transmission occurs. Increment the counter by one for each REGISTER_REQ MPCP frame transmitted as defined in [802.3ah] clause 64. This counter is mandatory for an ONU. This attribute is relevant for an OLT and an ONU. At the OLT value should be zero.
.1.3.6.1.4.1.11.2.14.11.15.2.42.2.1.1.2.1.6,HPN-ICF-DOT3-EFM-EPON-MIB::hpnicfDot3MpcpRxRegRequest,Counter32,read-only,,current,,A count of the number of times a REGISTER_REQ MPCP frames reception occurs. A single counter at the ONU and a set of counters, one for each LLID, at the OLT. Increment the counter by one for each REGISTER_REQ MPCP frame received for each LLID as defined in [802.3ah] clause 64. This counter is mandatory for an ONU and for an OLT. At the ONU value should be zero.
.1.3.6.1.4.1.11.2.14.11.15.2.42.2.1.1.2.1.7,HPN-ICF-DOT3-EFM-EPON-MIB::hpnicfDot3MpcpTxRegAck,Counter32,read-only,,current,,A count of the number of times a REGISTER_ACK MPCP frames transmission occurs. Increment the counter by one for each REGISTER_ACK MPCP frame transmitted as defined in [802.3ah] clause 64. This counter is mandatory for an ONU. This attribute is relevant for an OLT and an ONU. At the OLT the value should be zero.
.1.3.6.1.4.1.11.2.14.11.15.2.42.2.1.1.2.1.8,HPN-ICF-DOT3-EFM-EPON-MIB::hpnicfDot3MpcpRxRegAck,Counter32,read-only,,current,,A count of the number of times a REGISTER_ACK MPCP frames reception occurs. A single counter at the ONU and a set of counters, one for each LLID, at the OLT. Increment the counter by one for each REGISTER_ACK MPCP frame received for each LLID, as defined in [802.3ah] clause 64. This counter is mandatory for an ONU and for an OLT. At the ONU the value should be zero.
.1.3.6.1.4.1.11.2.14.11.15.2.42.2.1.1.2.1.9,HPN-ICF-DOT3-EFM-EPON-MIB::hpnicfDot3MpcpTxReport,Counter32,read-only,,current,,A count of the number of times a REPORT MPCP frames transmission occurs. Increment the counter by one for each REPORT MPCP frame transmitted as defined in [802.3ah] clause 64. This counter is mandatory for an ONU. This attribute is relevant for an OLT and an ONU. At the OLT value should be zero.
.1.3.6.1.4.1.11.2.14.11.15.2.42.2.1.1.2.1.10,HPN-ICF-DOT3-EFM-EPON-MIB::hpnicfDot3MpcpRxReport,Counter32,read-only,,current,,A count of the number of times a REPORT MPCP frames reception occurs. A single counter at the ONU and a set of counters, one for each LLID, at the OLT. Increment the counter by one for each REPORT MPCP frame received for each LLID, as defined in [802.3ah] clause 64. This counter is mandatory for an ONU and for an OLT. At the ONU value should be zero.
.1.3.6.1.4.1.11.2.14.11.15.2.42.2.1.1.2.1.11,HPN-ICF-DOT3-EFM-EPON-MIB::hpnicfDot3MpcpTxGate,Counter32,read-only,,current,,A count of the number of times a GATE MPCP frames transmission occurs. A set of counters, one for each LLID, at the OLT. Increment the counter by one for each GATE MPCP frame transmitted, for each LLID, as defined in [802.3ah] clause 64. This counter is mandatory for an OLT. This attribute is relevant for an OLT and an ONU. At the ONU the value should be zero.
.1.3.6.1.4.1.11.2.14.11.15.2.42.2.1.1.2.1.12,HPN-ICF-DOT3-EFM-EPON-MIB::hpnicfDot3MpcpRxGate,Counter32,read-only,,current,,A count of the number of times a GATE MPCP frames reception occurs. A single counter at the ONU and a set of counters, one for each LLID ,at the OLT. Increment the counter by one for each GATE MPCP frame received, for each LLID, as defined in [802.3ah] clause 64. This counter is mandatory for an ONU and for an OLT. At the OLT the value should be zero.
.1.3.6.1.4.1.11.2.14.11.15.2.42.2.1.1.2.1.13,HPN-ICF-DOT3-EFM-EPON-MIB::hpnicfDot3MpcpTxRegister,Counter32,read-only,,current,,A count of the number of times a REGISTER MPCP frames transmission occurs. A set of counters, one for each LLID, at the OLT. Increment the counter by one for each REGISTER MPCP frame transmitted, for each LLID, as defined in [802.3ah] clause 64. This counter is mandatory for an OLT. This attribute is relevant for an OLT and an ONU. At the ONU the value should be zero.
.1.3.6.1.4.1.11.2.14.11.15.2.42.2.1.1.2.1.14,HPN-ICF-DOT3-EFM-EPON-MIB::hpnicfDot3MpcpRxRegister,Counter32,read-only,,current,,A count of the number of times a REGISTER MPCP frames reception occurs. A single counter at the ONU and a set of counters, one for each LLID, at the OLT. Increment the counter by one for each REGISTER MPCP frame received, for each LLID, as defined in [802.3ah] clause 64. This counter is mandatory for an ONU and for an OLT. at the OLT the value should be zero.
.1.3.6.1.4.1.11.2.14.11.15.2.42.2.1.1.2.1.15,HPN-ICF-DOT3-EFM-EPON-MIB::hpnicfDot3MpcpRxNotSupportedMPCP,Counter32,read-only,,current,,A count of the number of times a non-supported MPCP frames reception occurs. A single counter at the ONU and a set of counters, one for each LLID, at the OLT. Increment the counter by one for each non-supported MPCP frame received, for each LLID, as defined in [802.3ah] clause 64. This counter is mandatory for an ONU and for an OLT.
.1.3.6.1.4.1.11.2.14.11.15.2.42.2.1.2,HPN-ICF-DOT3-EFM-EPON-MIB::hpnicfDot3MpcpConformance,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.2.42.2.1.2.1,HPN-ICF-DOT3-EFM-EPON-MIB::hpnicfDot3MpcpGroups,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.2.42.2.1.2.1.1,HPN-ICF-DOT3-EFM-EPON-MIB::hpnicfDot3MpcpGroupBase,,,,,,A collection of objects of dot3 Mpcp Basic entity state definition.
.1.3.6.1.4.1.11.2.14.11.15.2.42.2.1.2.1.2,HPN-ICF-DOT3-EFM-EPON-MIB::hpnicfDot3MpcpGroupParam,,,,,,A collection of objects of dot3 Mpcp for P2MP parameters.
.1.3.6.1.4.1.11.2.14.11.15.2.42.2.1.2.1.3,HPN-ICF-DOT3-EFM-EPON-MIB::hpnicfDot3MpcpGroupStat,,,,,,A collection of objects of dot3 Mpcp Statistics
.1.3.6.1.4.1.11.2.14.11.15.2.42.2.1.2.2,HPN-ICF-DOT3-EFM-EPON-MIB::hpnicfDot3MpcpCompliances,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.2.42.2.1.2.2.1,HPN-ICF-DOT3-EFM-EPON-MIB::hpnicfDot3MpcpCompliance,,,,,,The compliance statement for Multi-point control protocol interfaces.
.1.3.6.1.4.1.11.2.14.11.15.2.42.2.2,HPN-ICF-DOT3-EFM-EPON-MIB::hpnicfDot3OmpEmulationMIB,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.2.42.2.2.1,HPN-ICF-DOT3-EFM-EPON-MIB::hpnicfDot3OmpEmulationObjects,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.2.42.2.2.1.1,HPN-ICF-DOT3-EFM-EPON-MIB::hpnicfDot3OmpEmulationTable,,not-accessible,,current,,Table for dot3 OmpEmulation MIB modules.
.1.3.6.1.4.1.11.2.14.11.15.2.42.2.2.1.1.1,HPN-ICF-DOT3-EFM-EPON-MIB::hpnicfDot3OmpEmulationEntry,,not-accessible,ifIndex,current,,An entry in the dot3 OmpEmulation MIB modules table.
.1.3.6.1.4.1.11.2.14.11.15.2.42.2.2.1.1.1.1,HPN-ICF-DOT3-EFM-EPON-MIB::hpnicfDot3OmpEmulationID,Integer32,read-only,,current,,The value of hpnicfDot3OmpEmulationID is assigned so as to uniquely identify a OMPEmulation entity among the subordinate managed objects of the containing object. The value is mandated for an ONU.
.1.3.6.1.4.1.11.2.14.11.15.2.42.2.2.1.1.1.2,HPN-ICF-DOT3-EFM-EPON-MIB::hpnicfDot3OmpEmulationType,INTEGER,read-only,,current,unknown(1):olt(2):onu(3),A read-only value that indicates that mode of operation of the Reconciliation Sublayer for Point to Point Emulation (see [802.3ah] clause 65.1). unknown(1) value is assigned in initializing, true state or type not yet known. olt(2) value is assigned when Sublayer operating in OLT mode. onu(3) value is assigned when Sublayer operating in ONU mode.
.1.3.6.1.4.1.11.2.14.11.15.2.42.2.2.1.2,HPN-ICF-DOT3-EFM-EPON-MIB::hpnicfDot3OmpEmulationStatTable,,not-accessible,,current,,This table defines the list of statistics counters of [802.3ah] clause 65 OMP interface.
.1.3.6.1.4.1.11.2.14.11.15.2.42.2.2.1.2.1,HPN-ICF-DOT3-EFM-EPON-MIB::hpnicfDot3OmpEmulationStatEntry,,not-accessible,ifIndex,current,,Table entries for Table of statistics counters of [802.3ah] clause 65 OMP interface.
.1.3.6.1.4.1.11.2.14.11.15.2.42.2.2.1.2.1.1,HPN-ICF-DOT3-EFM-EPON-MIB::hpnicfDot3OmpEmulationSLDErrors,Counter32,read-only,,current,,A count of frames received that do not contain a valid SLD field as defined in [802.3ah] clause 65.1.3.3.1. This attribute is mandatory for an OLT and optional for an ONU.
.1.3.6.1.4.1.11.2.14.11.15.2.42.2.2.1.2.1.2,HPN-ICF-DOT3-EFM-EPON-MIB::hpnicfDot3OmpEmulationCRC8Errors,Counter32,read-only,,current,,A count of frames received that contain a valid SLD field, as defined in [802.3ah] clause 65.1.3.3.1, but do not pass the CRC-8 check as defined in [802.3ah] clause 65.1.3.3.3. This attribute is mandatory for an OLT and for an ONU.
.1.3.6.1.4.1.11.2.14.11.15.2.42.2.2.1.2.1.3,HPN-ICF-DOT3-EFM-EPON-MIB::hpnicfDot3OmpEmulationBadLLID,Counter32,read-only,,current,,A count of frames received that contain a valid SLD field, as defined in [802.3ah] clause 65.1.3.3.1, and pass the CRC-8 check, as defined in [802.3ah] clause 65.1.3.3.3, but are discarded due to the LLID check as defined in [802.3ah] clause 65.1.3.3.2. This attribute is relevant for an OLT and an ONU.
.1.3.6.1.4.1.11.2.14.11.15.2.42.2.2.1.2.1.4,HPN-ICF-DOT3-EFM-EPON-MIB::hpnicfDot3OmpEmulationGoodLLID,Counter32,read-only,,current,,A count of frames received that contain a valid SLD field, as defined in [802.3ah] clause 65.1.3.3.1, and pass the CRC-8 check, as defined in [802.3ah] clause 65.1.3.3.3. This attribute is relevant for an OLT and an ONU.
.1.3.6.1.4.1.11.2.14.11.15.2.42.2.2.1.2.1.5,HPN-ICF-DOT3-EFM-EPON-MIB::hpnicfDot3OmpEmulationOnuPonCastLLID,Counter32,read-only,,current,,A count of frames received that contain a valid SLD field in an ONU, as defined in [802.3ah] 65.1.3.3.1, passes the CRC-8 check, as defined in [802.3ah] 65.1.3.3.3, and the frame meets the rule for acceptance defined in [802.3ah] 65.1.3.3.2.
.1.3.6.1.4.1.11.2.14.11.15.2.42.2.2.1.2.1.6,HPN-ICF-DOT3-EFM-EPON-MIB::hpnicfDot3OmpEmulationOltPonCastLLID,Counter32,read-only,,current,,A count of frames received that contain a valid SLD field in an OLT, as defined in [802.3ah] 65.1.3.3.1, passes the CRC-8 check, as defined in [802.3ah] 65.1.3.3.3, and the frame meets the rule for acceptance defined in [802.3ah] 65.1.3.3.2.
.1.3.6.1.4.1.11.2.14.11.15.2.42.2.2.1.2.1.7,HPN-ICF-DOT3-EFM-EPON-MIB::hpnicfDot3OmpEmulationBroadcastLLIDNotOnuID,Counter32,read-only,,current,,A count of frames received that contain a valid SLD field in a OLT, as defined in [802.3ah] clause 65.1.3.3.1, and pass the CRC-8 check, as defined in [802.3ah] clause 65.1.3.3.3, and contain broadcast LLID as defined in [802.3ah] clause 65. This attribute is mandatory for an OLT and for an ONU.
.1.3.6.1.4.1.11.2.14.11.15.2.42.2.2.1.2.1.8,HPN-ICF-DOT3-EFM-EPON-MIB::hpnicfDot3OmpEmulationOnuLLIDNotBroadcast,Counter32,read-only,,current,,A count of frames received that contain a valid SLD field in a OLT, as defined in [802.3ah] clause 65.1.3.3.1, and pass the CRC-8 check, as defined in [802.3ah] clause 65.1.3.3.3, and contain the ONU's LLID as defined in [802.3ah] clause 65. This attribute is mandatory for an ONU and mandatory for an OLT (a counter per LLID).
.1.3.6.1.4.1.11.2.14.11.15.2.42.2.2.1.2.1.9,HPN-ICF-DOT3-EFM-EPON-MIB::hpnicfDot3OmpEmulationBroadcastLLIDPlusOnuId,Counter32,read-only,,current,,A count of frames received that contain a valid SLD field in a OLT, as defined in [802.3ah] clause 65.1.3.3.1, and pass the CRC-8 check, as defined in [802.3ah] clause 65.1.3.3.3, and contain the broadcast LLID plus ONU's LLID (frame reflected) as defined in [802.3ah] clause 65. This attribute is mandatory for an ONU and mandatory for an OLT (a counter per LLID).
.1.3.6.1.4.1.11.2.14.11.15.2.42.2.2.1.2.1.10,HPN-ICF-DOT3-EFM-EPON-MIB::hpnicfDot3OmpEmulationNotBroadcastLLIDNotOnuId,Counter32,read-only,,current,,A count of frames received that contain a valid SLD field in a OLT, as defined in [802.3ah] clause 65.1.3.3.1, and pass the CRC-8 check, as defined in [802.3ah] clause 65.1.3.3.3, and does not contain the ONU's LLID as defined in [802.3ah] clause 65. This attribute is mandatory for an ONU
.1.3.6.1.4.1.11.2.14.11.15.2.42.2.2.2,HPN-ICF-DOT3-EFM-EPON-MIB::hpnicfDot3OmpeConformance,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.2.42.2.2.2.1,HPN-ICF-DOT3-EFM-EPON-MIB::hpnicfDot3OmpeGroups,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.2.42.2.2.2.1.1,HPN-ICF-DOT3-EFM-EPON-MIB::hpnicfDot3OmpeGroupID,,,,,,A collection of objects of dot3 OMP emulation ID entity state definition.
.1.3.6.1.4.1.11.2.14.11.15.2.42.2.2.2.1.2,HPN-ICF-DOT3-EFM-EPON-MIB::hpnicfDot3OmpeGroupStat,,,,,,A collection of objects of dot3 OMP emulation Statistics
.1.3.6.1.4.1.11.2.14.11.15.2.42.2.2.2.2,HPN-ICF-DOT3-EFM-EPON-MIB::hpnicfDot3OmpeCompliances,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.2.42.2.2.2.2.1,HPN-ICF-DOT3-EFM-EPON-MIB::hpnicfDot3OmpeCompliance,,,,,,The compliance statement for OMPEmulation interfaces.
.1.3.6.1.4.1.11.2.14.11.15.2.42.2.3,HPN-ICF-DOT3-EFM-EPON-MIB::hpnicfDot3EponMauMIB,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.2.42.2.3.1,HPN-ICF-DOT3-EFM-EPON-MIB::hpnicfDot3EponMauObjects,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.2.42.2.3.1.1,HPN-ICF-DOT3-EFM-EPON-MIB::hpnicfDot3EponMauTable,,not-accessible,,current,,Table for dot3 MAU EPON MIB modules.
.1.3.6.1.4.1.11.2.14.11.15.2.42.2.3.1.1.1,HPN-ICF-DOT3-EFM-EPON-MIB::hpnicfDot3EponMauEntry,,not-accessible,ifIndex,current,,An entry in the dot3 MAU EPON MIB modules table.
.1.3.6.1.4.1.11.2.14.11.15.2.42.2.3.1.1.1.1,HPN-ICF-DOT3-EFM-EPON-MIB::hpnicfDot3EponMauPCSCodingViolation,Counter32,read-only,,current,,For 100 Mb/ s operation it is a count of the number of times an invalid code-group is received, other than the /H/ code-group. For 1000 Mb/ s operation it is a count of the number of times an invalid codegroup is received, other than the /V/ code-group.
.1.3.6.1.4.1.11.2.14.11.15.2.42.2.3.1.1.1.2,HPN-ICF-DOT3-EFM-EPON-MIB::hpnicfDot3EponMauFecAbility,INTEGER,read-only,,current,unknown(1):nonsupported(2):supported(3),A read-only value that indicates the support of operation of the 1000BASE-PX PHY optional FEC Sublayer for Forward error correction see [802.3ah] clause 65.2). unknown(1) value is assigned in initializing, for non FEC support state or type not yet known. nonsupported(2) value is assigned when Sublayer is not support. supported(3) value is assigned when Sublayer is supported.
.1.3.6.1.4.1.11.2.14.11.15.2.42.2.3.1.1.1.3,HPN-ICF-DOT3-EFM-EPON-MIB::hpnicfDot3EponMauFecMode,INTEGER,read-write,,current,unknown(1):disabled(2):enabled(3),A read-write value that indicates the mode of operation of the 1000BASE-PX PHY optional FEC Sublayer for Forward error correction see [802.3ah] clause 65.2). A GET operation returns the current mode of operation the PHY. A SET operation changes the mode of operation of the PHY to the indicated value. unknown(1) value is assigned in initializing, for non FEC support state or type not yet known. disabled(2) value is assigned when Sublayer operating in disabled mode. enabled(3) value is assigned when Sublayer operating in FEC mode. writing can be done all the time.
.1.3.6.1.4.1.11.2.14.11.15.2.42.2.3.1.1.1.4,HPN-ICF-DOT3-EFM-EPON-MIB::hpnicfDot3EponMauFECCorrectedBlocks,Counter32,read-only,,current,,For 10PASS-TS, 2BASE-TL and 1000BASE-PX PHYs, a count of corrected FEC blocks. This counter will not increment for other PHY Types. Increment the counter by one for each received block that is corrected by the FEC function in the PHY.
.1.3.6.1.4.1.11.2.14.11.15.2.42.2.3.1.1.1.5,HPN-ICF-DOT3-EFM-EPON-MIB::hpnicfDot3EponMauFECUncorrectableBlocks,Counter32,read-only,,current,,For 10PASS-TS, 2BASE-TL and 1000BASE-PX PHYs, a count of uncorrectable FEC blocks. This counter will not increment for other PHY Types. Increment the counter by one for each FEC block that is determined to be uncorrectable by the FEC function in the PHY.
.1.3.6.1.4.1.11.2.14.11.15.2.42.2.3.1.1.1.6,HPN-ICF-DOT3-EFM-EPON-MIB::hpnicfDot3EponMauBufferHeadCodingViolation,Counter32,read-only,,current,,For 1000 Mbps operation it is a counts of the number of invalid code-group received directly from the link.
.1.3.6.1.4.1.11.2.14.11.15.2.42.2.3.2,HPN-ICF-DOT3-EFM-EPON-MIB::hpnicfDot3EponMauConformance,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.2.42.2.3.2.1,HPN-ICF-DOT3-EFM-EPON-MIB::hpnicfDot3EponMauGroups,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.2.42.2.3.2.1.1,HPN-ICF-DOT3-EFM-EPON-MIB::hpnicfDot3EponMauGroupAll,,,,,,A collection of objects of dot3 MAU definition.
.1.3.6.1.4.1.11.2.14.11.15.2.42.2.3.2.1.2,HPN-ICF-DOT3-EFM-EPON-MIB::hpnicfDot3EponMauGroupFEC,,,,,,A collection of objects of FEC group definition.
.1.3.6.1.4.1.11.2.14.11.15.2.42.2.3.2.2,HPN-ICF-DOT3-EFM-EPON-MIB::hpnicfDot3EponMauCompliances,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.2.42.2.3.2.2.1,HPN-ICF-DOT3-EFM-EPON-MIB::hpnicfDot3EponMauCompliance,,,,,,The compliance statement for MAU EPON interfaces.
.1.3.6.1.4.1.11.2.14.11.15.2.42.2.3.3,HPN-ICF-DOT3-EFM-EPON-MIB::hpnicfDot3EponMauType,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.2.42.2.3.3.1,HPN-ICF-DOT3-EFM-EPON-MIB::hpnicfEponMauType1000BasePXOLT,,,,,,Multipoint MAC Control (per 802.3 section 64,65) OLT (master), unknown PMD
.1.3.6.1.4.1.11.2.14.11.15.2.42.2.3.3.2,HPN-ICF-DOT3-EFM-EPON-MIB::hpnicfEponMauType1000BasePXONU,,,,,,Multipoint MAC Control (per 802.3 section 64,65),ONU (slave), unknown PMD
.1.3.6.1.4.1.11.2.14.11.15.2.42.2.3.3.3,HPN-ICF-DOT3-EFM-EPON-MIB::hpnicfEponMauType1000BasePX10DOLT,,,,,,EPON over 10K link, downlink (per 802.3 section 60), OLT side
.1.3.6.1.4.1.11.2.14.11.15.2.42.2.3.3.4,HPN-ICF-DOT3-EFM-EPON-MIB::hpnicfEponMauType1000BasePX10DONU,,,,,,EPON over 10K link, downlink (per 802.3 section 60), ONU side
.1.3.6.1.4.1.11.2.14.11.15.2.42.2.3.3.5,HPN-ICF-DOT3-EFM-EPON-MIB::hpnicfEponMauType1000BasePX10UOLT,,,,,,EPON over 10K link, uplink (per 802.3 section 60), OLT side
.1.3.6.1.4.1.11.2.14.11.15.2.42.2.3.3.6,HPN-ICF-DOT3-EFM-EPON-MIB::hpnicfEponMauType1000BasePX10UONU,,,,,,EPON over 10K link, uplink (per 802.3 section 60), ONU side
.1.3.6.1.4.1.11.2.14.11.15.2.42.2.3.3.7,HPN-ICF-DOT3-EFM-EPON-MIB::hpnicfEponMauType1000BasePX20DOLT,,,,,,EPON over 20K link, downlink (per 802.3 section 60), OLT side
.1.3.6.1.4.1.11.2.14.11.15.2.42.2.3.3.8,HPN-ICF-DOT3-EFM-EPON-MIB::hpnicfEponMauType1000BasePX20DONU,,,,,,EPON over 20K link, downlink (per 802.3 section 60), ONU side
.1.3.6.1.4.1.11.2.14.11.15.2.42.2.3.3.9,HPN-ICF-DOT3-EFM-EPON-MIB::hpnicfEponMauType1000BasePX20UOLT,,,,,,EPON over 20K link, uplink (per 802.3 section 60), OLT side
.1.3.6.1.4.1.11.2.14.11.15.2.42.2.3.3.10,HPN-ICF-DOT3-EFM-EPON-MIB::hpnicfEponMauType1000BasePX20UONU,,,,,,EPON over 20K link, uplink (per 802.3 section 60), ONU side
.1.3.6.1.4.1.11.2.14.11.15.2.42.3,HPN-ICF-EFM-COMMON-MIB::hpnicfEfmOamMIB,,,,,,The MIB module for managing the new Ethernet OAM features introduced by the Ethernet in the First Mile task force (IEEE 802.3ah). The functionality presented here is based on IEEE 802.3ah [802.3ah], released in October, 2004. In particular, this MIB focused on the changes to Clause 30 of the draft that are not specific to any physical layer. These changes are primarily reflected in the new OAM features developed under this project, that can be applied to any Ethernet like interface. The OAM features are described in Clause 57 of [802.3ah]. This MIB is excerpted from the draft files directly,only changed the object name,added the hpnicf as prefix. The following reference is used throughout this MIB module: [802.3ah] refers to: IEEE Std 802.3ah-2004: 'Draft amendment to - Information technology - Telecommunications and information exchange between systems - Local and metropolitan are networks - Specific requirements - Part 3: Carrier sense multiple access with collision detection (CSMA/CD) access method and physical layer specifications - Media Access Control Parameters, Physical Layers and Management Parameters for subscriber access networks', October 2004. [802-2001] refers to: 'IEEE Standard for LAN/MAN (Local Area Network/Metropolitan Area Network): Overview and Architecture', IEEE 802, June 2001.
.1.3.6.1.4.1.11.2.14.11.15.2.42.3.1,HPN-ICF-EFM-COMMON-MIB::hpnicfDot3OamMIB,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.2.42.3.1.1,HPN-ICF-EFM-COMMON-MIB::hpnicfDot3OamTable,,not-accessible,,current,,Primary controls and status for the OAM capabilities of an Ethernet like interface. There will be one row in this table for each Ethernet like interface in the system that supports the Ethernet OAM functions defined in [802.3ah].
.1.3.6.1.4.1.11.2.14.11.15.2.42.3.1.1.1,HPN-ICF-EFM-COMMON-MIB::hpnicfDot3OamEntry,,not-accessible,ifIndex,current,,An entry in the table, containing information on the Ethernet OAM function for a single Ethernet like interface.
.1.3.6.1.4.1.11.2.14.11.15.2.42.3.1.1.1.1,HPN-ICF-EFM-COMMON-MIB::hpnicfDot3OamAdminState,INTEGER,read-write,,current,disabled(1):enabled(2),This object is used to provision the default administrative OAM mode for this interface. This object represents the desired state of OAM for this interface. The hpnicfDot3OamAdminState always starts in the disabled(1) state until an explicity management action or configuration information retained by the system causes a transition to the enabled(2) state. Note that the value of this object is ignored when the interface is not operating in full-duplex mode. OAM is not supported on half-duplex links. 
.1.3.6.1.4.1.11.2.14.11.15.2.42.3.1.1.1.2,HPN-ICF-EFM-COMMON-MIB::hpnicfDot3OamOperStatus,INTEGER,read-only,,current,disabled(1):linkfault(2):passiveWait(3):activeSendLocal(4):sendLocalAndRemote(5):sendLocalAndRemoteOk(6):oamPeeringLocallyRejected(7):oamPeeringRemotelyRejected(8):operational(9),At initialization and failure conditions, two OAM entities on the same full-duplex Ethernet link begin a discovery phase to determine what OAM capabilities may be used on that link. The progress of this initialization is controlled by the OAM sublayer. This value is always disabled(1) if OAM is disabled on this interface via the hpnicfDot3OamAdminState. If the link has detected a fault and is transmitting OAMPDUs with a link fault indication, the value is linkFault(2). The passiveWait(3) state is returned only by OAM entities in passive mode (hpnicfDot3OamMode) and reflects the state in which the OAM entity is waiting to see if the peer device is OAM capable. The activeSendLocal(4) is used by active mode devices (hpnicfDot3OamMode) and reflects the OAM entity actively trying to discover whether the peer has OAM capability but has not yet made that determination. The state sendLocalAndRemote(5) reflects that the local OAM entity has discovered the peer but has not yet accepted or rejected the configuration of the peer. The local device can, for whatever reason, decide that the peer device is unacceptable and decline OAM peering. If the local OAM entity rejects the peer OAM entity, the state becomes oamPeeringLocallyRejected(7). If the OAM peering is allowed by the local device, the state moves to sendLocalAndRemoteOk(6). Note that both the sendLocalAndRemote(5) and oamPeeringLocallyRejected(7) states fall within the state SEND_LOCAL_REMOTE of the Discovery state diagram [802.3ah, Figure 57-5], with the difference being whether the local OAM client has actively rejected the peering or has just not indicated any decision yet. Whether a peering decision has been made is indicated via the local flags field in the OAMPDU (reflected in the aOAMLocalFlagsField of 30.3.6.1.10). If the remote OAM entity rejects the peering, the state becomes oamPeeringRemotelyRejected(8). Note that both the sendLocalAndRemoteOk(6) and oamPeeringRemotelyRejected(8) states fall within the state SEND_LOCAL_REMOTE_OK of the Discovery state diagram [802.3ah, Figure 57-5], with the difference being whether the remote OAM client has rejected the peering or has just not yet decided. This is indicated via the remote flags field in the OAM PDU (reflected in the aOAMRemoteFlagsField of 30.3.6.1.11). When the local OAM entity learns that both it and the remote OAM entity have accepted the peering, the state moves to operational(9) corresponding to the SEND_ANY state of the Discovery state diagram [802.3ah, Figure 57-5]. 
.1.3.6.1.4.1.11.2.14.11.15.2.42.3.1.1.1.3,HPN-ICF-EFM-COMMON-MIB::hpnicfDot3OamMode,INTEGER,read-write,,current,active(1):passive(2),This object configures the mode of OAM operation for this Ethernet like interface. OAM on Ethernet interfaces may be in 'active' mode or 'passive' mode. These two modes differ in that active mode provides additional capabilities to initiate monitoring activities with the remote OAM peer entity, while passive mode generally waits for the peer to initiate OAM actions with it. As an example, an active OAM entity can put the remote OAM entity in a loopback state, where a passive OAM entity cannot. Changing this value results in incrementing the configuration revision field of locally generated OAMPDUs (30.3.6.1.12) and potentially re-doing the OAM discovery process if the hpnicfDot3OamOperStatus was already operational(9). 
.1.3.6.1.4.1.11.2.14.11.15.2.42.3.1.1.1.4,HPN-ICF-EFM-COMMON-MIB::hpnicfDot3OamMaxOamPduSize,Integer32,read-only,,current,,The largest OAMPDU that the OAM entity supports. OAM entities exchange maximum OAMPDU sizes and negotiate to use the smaller of the two maximum OAMPDU sizes between the peers. This value is determined by the local implementation. 
.1.3.6.1.4.1.11.2.14.11.15.2.42.3.1.1.1.5,HPN-ICF-EFM-COMMON-MIB::hpnicfDot3OamConfigRevision,Unsigned32,read-only,,current,,The configuration revision of the OAM entity as reflected in the latest OAMPDU sent by the OAM entity. The config revision is used by OAM entities to indicate configuration changes have occured which might require the peer OAM entity to re-evaluate whether the peering is allowed. See local_satisfied in [802.3ah, 57.3.1.2]. 
.1.3.6.1.4.1.11.2.14.11.15.2.42.3.1.1.1.6,HPN-ICF-EFM-COMMON-MIB::hpnicfDot3OamFunctionsSupported,BITS,read-only,,current,unidirectionalSupport(0):loopbackSupport(1):eventSupport(2):variableSupport(3),The OAM functions supported on this Ethernet like interface. OAM consists of separate functional sets beyond the basic discovery process which is always required. These functional groups can be supported independently by any implementation. These values are communicated to the peer via the local configuration field of Information OAMPDUs. 
.1.3.6.1.4.1.11.2.14.11.15.2.42.3.1.2,HPN-ICF-EFM-COMMON-MIB::hpnicfDot3OamPeerTable,,not-accessible,,current,,Information about the OAM peer for a particular Ethernet like interface. OAM entities communicate with a single OAM peer entity on full-duplex Ethernet links on which OAM is enabled and operating properly. In certain states, the OAM peer information is not available. Whether peer information is available is communicated via the hpnicfDot3OamPeerStatus object. When this object is inactive, all other information in the row is to be considered invalid. 
.1.3.6.1.4.1.11.2.14.11.15.2.42.3.1.2.1,HPN-ICF-EFM-COMMON-MIB::hpnicfDot3OamPeerEntry,,not-accessible,ifIndex,current,,An entry in the table, containing information on the peer OAM entity for a single Ethernet like interface. Note that there is at most one OAM peer for each Ethernet like interface. There is exactly one row in this table for each Ethernet like interface supporting OAM. 
.1.3.6.1.4.1.11.2.14.11.15.2.42.3.1.2.1.1,HPN-ICF-EFM-COMMON-MIB::hpnicfDot3OamPeerStatus,INTEGER,read-only,,current,active(1):inactive(2),This object indicates whether the information in this row should be considered valid. When active(1), the information is valid and represents the current peer of the OAM entity. When inactive(2), the information in this row is invalid. A value of inactive(2) is returned if the hpnicfDot3OamOperStatus is disabled, passiveWait, or activeSendLocal. For all other values of hpnicfDot3OamOperStatus, a value of active(1) is returned. 
.1.3.6.1.4.1.11.2.14.11.15.2.42.3.1.2.1.2,HPN-ICF-EFM-COMMON-MIB::hpnicfDot3OamPeerMacAddress,OCTET,read-only,,current,,The MAC address of the peer OAM entity. The MAC address is derived from the most recently received OAMPDU. This value is initialized to all zeros (0x000000000000). This value is invalid if the hpnicfDot3OamPeerStatus is inactive. An OAMPDU is indicated by a valid frame with (1) destination MAC address equal to that of the reserved MAC address for Slow Protocols (See 43B of [802.3ah]), (2) a lengthOrType field equal to the reserved type for Slow Protocols, (3) and a Slow Protocols subtype equal to that of the subtype reserved for OAM. 
.1.3.6.1.4.1.11.2.14.11.15.2.42.3.1.2.1.3,HPN-ICF-EFM-COMMON-MIB::hpnicfDot3OamPeerVendorOui,OCTET,read-only,,current,,The OUI of the OAM peer as reflected in the latest Information OAMPDU received with a Local Information TLV. The OUI can be used to identify the vendor of the remote OAM entity. This value is initialized to all zeros (0x000000). This value is considered invalid if the hpnicfDot3OamPeerStatus is inactive. An Information OAMPDU is indicated by a valid frame with (1) destination MAC address equal to that of the reserved MAC address for Slow Protocols (See 43B of [802.3ah]), (2) a lengthOrType field equal to the reserved type for Slow Protocols, (3) a Slow Protocols subtype equal to that of the subtype reserved for OAM, (4) a OAM code that equals the code reserved for Information OAMPDUs. 
.1.3.6.1.4.1.11.2.14.11.15.2.42.3.1.2.1.4,HPN-ICF-EFM-COMMON-MIB::hpnicfDot3OamPeerVendorInfo,Unsigned32,read-only,,current,,The Vendor Info of the OAM peer as reflected in the latest Information OAMPDU received with a Local Information TLV. The vendor information field is within the Local Information TLV, and can be used to determine additional information about the peer entity. The format of the vendor information is unspecified within the 32-bit field. This value is intialized to all zeros (0x00000000). This value is invalid if the hpnicfDot3OamPeerStatus is inactive. An Information OAMPDU is indicated by a valid frame with (1) destination MAC address equal to that of the reserved MAC address for Slow Protocols (See 43B of [802.3ah]), (2) a lengthOrType field equal to the reserved type for Slow Protocols, (3) a Slow Protocols subtype equal to that of the subtype reserved for OAM, and (4) a OAM code that equals the code reserved for Information OAMPDUs. 
.1.3.6.1.4.1.11.2.14.11.15.2.42.3.1.2.1.5,HPN-ICF-EFM-COMMON-MIB::hpnicfDot3OamPeerMode,INTEGER,read-only,,current,active(1):passive(2):unknown(3),The mode of the OAM peer as reflected in the latest Information OAMPDU received with a Local Information TLV. The mode of the peer can be determined from the Configuration field in the Local Information TLV of the last Information OAMPDU received from the peer. This value is initialized to unknown(3), and is not valid if the hpnicfDot3OamPeerStatus is inactive. An Information OAMPDU is indicated by a valid frame with (1) destination MAC address equal to that of the reserved MAC address for Slow Protocols (See 43B of [802.3ah]), (2) a lengthOrType field equal to the reserved type for Slow Protocols, (3) a Slow Protocols subtype equal to that of the subtype reserved for OAM, and (4) a OAM code that equals the code reserved for Information OAMPDUs. 
.1.3.6.1.4.1.11.2.14.11.15.2.42.3.1.2.1.6,HPN-ICF-EFM-COMMON-MIB::hpnicfDot3OamPeerMaxOamPduSize,Integer32,read-only,,current,,The maximum size of OAMPDU supported by the peer as reflected in the latest Information OAMPDU received with a Local Information TLV. Ethernet OAM on this interface must not use OAMPDUs that exceed this size. The maximum OAMPDU size can be determined from the PDU Configuration field of the Local Information TLV of the last Information OAMPDU received from the peer. This value is initialized to 64, and is invalid if the hpnicfDot3OamPeerStatus is inactive. An Information OAMPDU is indicated by a valid frame with (1) destination MAC address equal to that of the reserved MAC address for Slow Protocols (See 43B of [802.3ah]), (2) a lengthOrType field equal to the reserved type for Slow Protocols, (3) a Slow Protocols subtype equal to that of the subtype reserved for OAM, and (4) a OAM code that equals the code reserved for Information OAMPDUs. 
.1.3.6.1.4.1.11.2.14.11.15.2.42.3.1.2.1.7,HPN-ICF-EFM-COMMON-MIB::hpnicfDot3OamPeerConfigRevision,Unsigned32,read-only,,current,,The configuration revision of the OAM peer as reflected in the latest OAMPDU. This attribute is changed by the peer whenever it has a local configuration change for Ethernet OAM this interface. This value is initialized to all zeros (0x00000000), and is invalid if the hpnicfDot3OamPeerStatus is inactive. The configuration revision can be determined from the Revision field of the Local Information TLV of the most recently received Information OAMPDU with a Local Information TLV. An Information OAMPDU is indicated by a valid frame with (1) destination MAC address equal to that of the reserved MAC address for Slow Protocols (See 43B of [802.3ah]), (2) a lengthOrType field equal to the reserved type for Slow Protocols, (3) a Slow Protocols subtype equal to that of the subtype reserved for OAM, and (4) a OAM code that equals the code reserved for Information OAMPDUs. 
.1.3.6.1.4.1.11.2.14.11.15.2.42.3.1.2.1.8,HPN-ICF-EFM-COMMON-MIB::hpnicfDot3OamPeerFunctionsSupported,BITS,read-only,,current,unidirectionalSupport(0):loopbackSupport(1):eventSupport(2):variableSupport(3),The OAM functions supported on this Ethernet like interface. OAM consists of separate functionality sets above the basic discovery process. This value indicates the capabilities of the peer OAM entity with respect to these functions. This value is initialized so all bits are clear, and is invalid if the hpnicfDot3OamPeerStatus is inactive. The capbilities of the OAM peer can be determined from the configuration field of the Local Information TLV of the most recently received Information OAMPDU with a Local Information TLV. An Information OAMPDU is indicated by a valid frame with (1) destination MAC address equal to that of the reserved MAC address for Slow Protocols (See 43B of [802.3ah]), (2) a lengthOrType field equal to the reserved type for Slow Protocols, (3) a Slow Protocols subtype equal to that of the subtype reserved for OAM, and (4) a OAM code that equals the code reserved for Information OAMPDUs. 
.1.3.6.1.4.1.11.2.14.11.15.2.42.3.1.3,HPN-ICF-EFM-COMMON-MIB::hpnicfDot3OamLoopbackTable,,not-accessible,,current,,This table contains methods to control the loopback state of the local link as well as indicating the status of the loopback function. Loopback can be used to place the remote OAM entity in a state where every received frame (except OAMPDUs) are echoed back over the same interface on which they were received. In this state, at the remote entity, 'normal' traffic is disabled as only the looped back frames are transmitted on the interface. Loopback is thus an intrusive operation that prohibits normal data flow and should be used accordingly. 
.1.3.6.1.4.1.11.2.14.11.15.2.42.3.1.3.1,HPN-ICF-EFM-COMMON-MIB::hpnicfDot3OamLoopbackEntry,,not-accessible,ifIndex,current,,An entry in the table, containing information on the loopback status for a single Ethernet like interface. There is an entry in this table for every Ethernet like interface on which supports OAM and loopback function within OAM (as indicated in hpnicfDot3OamFunctionsSupported). 
.1.3.6.1.4.1.11.2.14.11.15.2.42.3.1.3.1.1,HPN-ICF-EFM-COMMON-MIB::hpnicfDot3OamLoopbackCommand,INTEGER,read-write,,current,noLoopback(1):startRemoteLoopback(2):stopRemoteLoopback(3),This attribute initiates or terminates remote loopback with an OAM peer. Writing startRemoteLoopback(2) to this attribute cause the local OAM client to send a loopback OAMPDU to the OAM peer with the loopback enable flags set. Writing stopRemoteLoopback(3) to this attribute will cause the local OAM client to send a loopback OAMPDU to the OAM peer with the loopback enable flags cleared. Writing noLoopback to this attribute has no effect. Writes to this attribute are ignored unless the OAM status of this interface is 'operational' (hpnicfDot3OamOperStatus). The attribute always returns noLoopback on a read. To determine the loopback status, use the attribute hpnicfDot3OamLoopbackStatus. 
.1.3.6.1.4.1.11.2.14.11.15.2.42.3.1.3.1.2,HPN-ICF-EFM-COMMON-MIB::hpnicfDot3OamLoopbackStatus,INTEGER,read-only,,current,noLoopback(1):initiatingLoopback(2):remoteLoopback(3):terminatingLoopback(4):localLoopback(5):unknown(6),The loopback status of the OAM entity. This status is determined by a combination of the local parser and multiplexer states, the remote parser and multiplexer states, as well as by the actions of the local OAM client. When operating in normal mode with no loopback in progress, the status reads noLoopback(1). If the OAM client has sent an Loopback OAMPDU and is waiting for a response, where the local parser and multiplexer states are DISCARD (see [802.3ah, 57.2.11.1]), the status is 'initiatingLoopback'. In this case, the local OAM entity has yet to receive any acknowledgement that the remote OAM entity has received its loopback command request. If the local OAM client knows that the remote OAM entity is in loopback mode (via the remote state information as described in [802.3ah, 57.2.11.1, 30.3.6.1.15]), the status is remoteLoopback(3). If the local OAM client is in the process of terminating the remote loopback [802.3ah, 57.2.11.3, 30.3.6.1.14], with its local multiplexer and parser states in DISCARD, the status is terminatingLoopback(4). If the remote OAM client has put the local OAM entity in loopback mode as indicated by its local parser state, the status is localLoopback(5). The unknown(6) status indicates the parser and multiplexer combination is unexpected. This status may be returned if the OAM loopback is in a transition state but should not persist. The values of this attribute correspond to the following values of the local and remote parser and multiplexer states. value LclPrsr LclMux RmtPrsr RmtMux noLoopback FWD FWD FWD FWD initLoopback DISCARD DISCARD FWD FWD rmtLoopback DISCARD FWD LPBK DISCARD tmtngLoopback DISCARD DISCARD LPBK DISCARD lclLoopback LPBK DISCARD DISCARD FWD unknown *** any other combination *** 
.1.3.6.1.4.1.11.2.14.11.15.2.42.3.1.3.1.3,HPN-ICF-EFM-COMMON-MIB::hpnicfDot3OamLoopbackIgnoreRx,INTEGER,read-write,,current,ignore(1):process(2),Since OAM loopback is a distruptive operation (user traffic does not pass), this attribute provides a mechanism to provide controls over whether received OAM loopback commands are processed or ignored. When the value is ignore(1), received loopback commands are ignored. When the value is process(2), OAM loopback commands are processed. The default value is to ignore loopback commands (ignore(1)). The attribute has no meaning if the local OAM entity does not support the loopback function (as defined in hpnicfDot3OamFunctionsSupported). 
.1.3.6.1.4.1.11.2.14.11.15.2.42.3.1.4,HPN-ICF-EFM-COMMON-MIB::hpnicfDot3OamStatsTable,,not-accessible,,current,,Statistics for the OAM function on a particular Ethernet like interface.
.1.3.6.1.4.1.11.2.14.11.15.2.42.3.1.4.1,HPN-ICF-EFM-COMMON-MIB::hpnicfDot3OamStatsEntry,,not-accessible,ifIndex,current,,An entry in the table, containing statistics information on the Ethernet OAM function for a single Ethernet like interface.
.1.3.6.1.4.1.11.2.14.11.15.2.42.3.1.4.1.1,HPN-ICF-EFM-COMMON-MIB::hpnicfDot3OamInformationTx,Counter32,read-only,,current,,A count of the number of Information OAMPDUs transmitted on this interface. An Information OAMPDU is indicated by a valid frame with (1) destination MAC address equal to that of the reserved MAC address for Slow Protocols (See 43B of [802.3ah]), (2) a lengthOrType field equal to the reserved type for Slow Protocols, (3) a Slow Protocols subtype equal to that of the subtype reserved for OAM, and (4) an OAMPDU code equals the OAM Information code. Discontinuities of this counter can occur at re-initialization of the management system, and at other times as indicated by the value of the ifCounterDiscontinuityTime. 
.1.3.6.1.4.1.11.2.14.11.15.2.42.3.1.4.1.2,HPN-ICF-EFM-COMMON-MIB::hpnicfDot3OamInformationRx,Counter32,read-only,,current,,A count of the number of Information OAMPDUs received on this interface. An Information OAMPDU is indicated by a valid frame with (1) destination MAC address equal to that of the reserved MAC address for Slow Protocols (See 43B of [802.3ah]), (2) a lengthOrType field equal to the reserved type for Slow Protocols, (3) a Slow Protocols subtype equal to that of the subtype reserved for OAM, and (4) an OAMPDU code equals the OAM Information code. Discontinuities of this counter can occur at re-initialization of the management system, and at other times as indicated by the value of the ifCounterDiscontinuityTime. 
.1.3.6.1.4.1.11.2.14.11.15.2.42.3.1.4.1.3,HPN-ICF-EFM-COMMON-MIB::hpnicfDot3OamUniqueEventNotificationTx,Counter32,read-only,,current,,A count of the number of unique Event OAMPDUs transmitted on this interface. Event notifications may be sent in duplicate to increase the probability of successfully being received, given the possiblity that a frame may be lost in transit. An Event Notification OAMPDU is indicated by a valid frame with (1) destination MAC address equal to that of the reserved MAC address for Slow Protocols (See 43B of [802.3ah]), (2) a lengthOrType field equal to the reserved type for Slow Protocols, (3) a Slow Protocols subtype equal to that of the subtype reserved for OAM, and (4) an OAMPDU code equals the OAM Event code. A unique Event Notification OAMPDU is indicated as an Event Notification OAMPDU with a Sequence Number field that is distinct from the previously transmitted Event Notification OAMPDU Sequence Number. Discontinuities of this counter can occur at re-initialization of the management system, and at other times as indicated by the value of the ifCounterDiscontinuityTime. 
.1.3.6.1.4.1.11.2.14.11.15.2.42.3.1.4.1.4,HPN-ICF-EFM-COMMON-MIB::hpnicfDot3OamUniqueEventNotificationRx,Counter32,read-only,,current,,A count of the number of unique Event OAMPDUs received on this interface. Event notification OAMPDUs may be sent in duplicate to increase the probability of successfully being received, given the possiblity that a frame may be lost in transit. An Event Notification OAMPDU is indicated by a valid frame with (1) destination MAC address equal to that of the reserved MAC address for Slow Protocols (See 43B of [802.3ah]), (2) a lengthOrType field equal to the reserved type for Slow Protocols, (3) a Slow Protocols subtype equal to that of the subtype reserved for OAM, and (4) an OAMPDU code equals the OAM Event code. A unique Event Notification OAMPDU is indicated as an Event Notification OAMPDU with a Sequence Number field that is distinct from the previously received Event Notification OAMPDU Sequence Number. Discontinuities of this counter can occur at re-initialization of the management system, and at other times as indicated by the value of the ifCounterDiscontinuityTime. 
.1.3.6.1.4.1.11.2.14.11.15.2.42.3.1.4.1.5,HPN-ICF-EFM-COMMON-MIB::hpnicfDot3OamDuplicateEventNotificationTx,Counter32,read-only,,current,,A count of the number of duplicate Event OAMPDUs transmitted on this interface. Event notification OAMPDUs may be sent in duplicate to increase the probability of successfully being received, given the possiblity that a frame may be lost in transit. An Event Notification OAMPDU is indicated by a valid frame with (1) destination MAC address equal to that of the reserved MAC address for Slow Protocols (See 43B of [802.3ah]), (2) a lengthOrType field equal to the reserved type for Slow Protocols, (3) a Slow Protocols subtype equal to that of the subtype reserved for OAM, and (4) an OAMPDU code equals the OAM Event code. A duplicate Event Notification OAMPDU is indicated as an Event Notification OAMPDU with a Sequence Number field that is identical to the previously transmitted Event Notification OAMPDU Sequence Number. Discontinuities of this counter can occur at re-initialization of the management system, and at other times as indicated by the value of the ifCounterDiscontinuityTime. 
.1.3.6.1.4.1.11.2.14.11.15.2.42.3.1.4.1.6,HPN-ICF-EFM-COMMON-MIB::hpnicfDot3OamDuplicateEventNotificationRx,Counter32,read-only,,current,,A count of the number of duplicate Event OAMPDUs received on this interface. Event notification OAMPDUs may be sent in duplicate to increase the probability of successfully being received, given the possiblity that a frame may be lost in transit. An Event Notification OAMPDU is indicated by a valid frame with (1) destination MAC address equal to that of the reserved MAC address for Slow Protocols (See 43B of [802.3ah]), (2) a lengthOrType field equal to the reserved type for Slow Protocols, (3) a Slow Protocols subtype equal to that of the subtype reserved for OAM, and (4) an OAMPDU code equals the OAM Event code. A duplicate Event Notification OAMPDU is indicated as an Event Notification OAMPDU with a Sequence Number field that is identical to the previously received Event Notification OAMPDU Sequence Number. Discontinuities of this counter can occur at re-initialization of the management system, and at other times as indicated by the value of the ifCounterDiscontinuityTime. 
.1.3.6.1.4.1.11.2.14.11.15.2.42.3.1.4.1.7,HPN-ICF-EFM-COMMON-MIB::hpnicfDot3OamLoopbackControlTx,Counter32,read-only,,current,,A count of the number of Loopback Control OAMPDUs transmitted on this interface. An Loopback Conrol OAMPDU is indicated by a valid frame with (1) destination MAC address equal to that of the reserved MAC address for Slow Protocols (See 43B of [802.3ah]), (2) a lengthOrType field equal to the reserved type for Slow Protocols, (3) a Slow Protocols subtype equal to that of the subtype reserved for OAM, and (4) an OAMPDU code equals the OAM Loopback Control code. Discontinuities of this counter can occur at re-initialization of the management system, and at other times as indicated by the value of the ifCounterDiscontinuityTime. 
.1.3.6.1.4.1.11.2.14.11.15.2.42.3.1.4.1.8,HPN-ICF-EFM-COMMON-MIB::hpnicfDot3OamLoopbackControlRx,Counter32,read-only,,current,,A count of the number of Loopback Control OAMPDUs transmitted on this interface. An Loopback Control OAMPDU is indicated by a valid frame with (1) destination MAC address equal to that of the reserved MAC address for Slow Protocols (See 43B of [802.3ah]), (2) a lengthOrType field equal to the reserved type for Slow Protocols, (3) a Slow Protocols subtype equal to that of the subtype reserved for OAM, and (4) an OAMPDU code equals the OAM Loopback Control code. Discontinuities of this counter can occur at re-initialization of the management system, and at other times as indicated by the value of the ifCounterDiscontinuityTime. 
.1.3.6.1.4.1.11.2.14.11.15.2.42.3.1.4.1.9,HPN-ICF-EFM-COMMON-MIB::hpnicfDot3OamVariableRequestTx,Counter32,read-only,,current,,A count of the number of Variable Request OAMPDUs transmitted on this interface. An Variable Request OAMPDU is indicated by a valid frame with (1) destination MAC address equal to that of the reserved MAC address for Slow Protocols (See 43B of [802.3ah]), (2) a lengthOrType field equal to the reserved type for Slow Protocols, (3) a Slow Protocols subtype equal to that of the subtype reserved for OAM, and (4) an OAMPDU code equals the OAM Variable Request code. Discontinuities of this counter can occur at re-initialization of the management system, and at other times as indicated by the value of the ifCounterDiscontinuityTime. 
.1.3.6.1.4.1.11.2.14.11.15.2.42.3.1.4.1.10,HPN-ICF-EFM-COMMON-MIB::hpnicfDot3OamVariableRequestRx,Counter32,read-only,,current,,A count of the number of Variable Request OAMPDUs received on this interface. An Variable Request OAMPDU is indicated by a valid frame with (1) destination MAC address equal to that of the reserved MAC address for Slow Protocols (See 43B of [802.3ah]), (2) a lengthOrType field equal to the reserved type for Slow Protocols, (3) a Slow Protocols subtype equal to that of the subtype reserved for OAM, and (4) an OAMPDU code equals the OAM Variable Request code. Discontinuities of this counter can occur at re-initialization of the management system, and at other times as indicated by the value of the ifCounterDiscontinuityTime. 
.1.3.6.1.4.1.11.2.14.11.15.2.42.3.1.4.1.11,HPN-ICF-EFM-COMMON-MIB::hpnicfDot3OamVariableResponseTx,Counter32,read-only,,current,,A count of the number of Variable Response OAMPDUs transmitted on this interface. An Variable Response OAMPDU is indicated by a valid frame with (1) destination MAC address equal to that of the reserved MAC address for Slow Protocols (See 43B of [802.3ah]), (2) a lengthOrType field equal to the reserved type for Slow Protocols, (3) a Slow Protocols subtype equal to that of the subtype reserved for OAM, and (4) an OAMPDU code equals the OAM Variable Response code. Discontinuities of this counter can occur at re-initialization of the management system, and at other times as indicated by the value of the ifCounterDiscontinuityTime. 
.1.3.6.1.4.1.11.2.14.11.15.2.42.3.1.4.1.12,HPN-ICF-EFM-COMMON-MIB::hpnicfDot3OamVariableResponseRx,Counter32,read-only,,current,,A count of the number of Variable Response OAMPDUs received on this interface. An Variable Response OAMPDU is indicated by a valid frame with (1) destination MAC address equal to that of the reserved MAC address for Slow Protocols (See 43B of [802.3ah]), (2) a lengthOrType field equal to the reserved type for Slow Protocols, (3) a Slow Protocols subtype equal to that of the subtype reserved for OAM, and (4) an OAMPDU code equals the OAM Variable Response code. Discontinuities of this counter can occur at re-initialization of the management system, and at other times as indicated by the value of the ifCounterDiscontinuityTime. 
.1.3.6.1.4.1.11.2.14.11.15.2.42.3.1.4.1.13,HPN-ICF-EFM-COMMON-MIB::hpnicfDot3OamOrgSpecificTx,Counter32,read-only,,current,,A count of the number of Organization Specific OAMPDUs transmitted on this interface. An Organization Specific OAMPDU is indicated by a valid frame with (1) destination MAC address equal to that of the reserved MAC address for Slow Protocols (See 43B of [802.3ah]), (2) a lengthOrType field equal to the reserved type for Slow Protocols, (3) a Slow Protocols subtype equal to that of the subtype reserved for OAM, and (4) an OAMPDU code equals the OAM Organization Specific code. Discontinuities of this counter can occur at re-initialization of the management system, and at other times as indicated by the value of the ifCounterDiscontinuityTime. 
.1.3.6.1.4.1.11.2.14.11.15.2.42.3.1.4.1.14,HPN-ICF-EFM-COMMON-MIB::hpnicfDot3OamOrgSpecificRx,Counter32,read-only,,current,,A count of the number of Organization Specific OAMPDUs received on this interface. An Organization Specific OAMPDU is indicated by a valid frame with (1) destination MAC address equal to that of the reserved MAC address for Slow Protocols (See 43B of [802.3ah]), (2) a lengthOrType field equal to the reserved type for Slow Protocols, (3) a Slow Protocols subtype equal to that of the subtype reserved for OAM, and (4) an OAMPDU code equals the OAM Organization Specific code. Discontinuities of this counter can occur at re-initialization of the management system, and at other times as indicated by the value of the ifCounterDiscontinuityTime. 
.1.3.6.1.4.1.11.2.14.11.15.2.42.3.1.4.1.15,HPN-ICF-EFM-COMMON-MIB::hpnicfDot3OamUnsupportedCodesTx,Counter32,read-only,,current,,A count of the number of OAMPDUs transmitted on this interface with an unsupported op-code. An unsupported opcode OAMPDU is indicated by a valid frame with (1) destination MAC address equal to that of the reserved MAC address for Slow Protocols (See 43B of [802.3ah]), (2) a lengthOrType field equal to the reserved type for Slow Protocols, (3) a Slow Protocols subtype equal to that of the subtype reserved for OAM, and (4) an OAMPDU code equals the opcode for a function that is not supported by the device. Discontinuities of this counter can occur at re-initialization of the management system, and at other times as indicated by the value of the ifCounterDiscontinuityTime. 
.1.3.6.1.4.1.11.2.14.11.15.2.42.3.1.4.1.16,HPN-ICF-EFM-COMMON-MIB::hpnicfDot3OamUnsupportedCodesRx,Counter32,read-only,,current,,A count of the number of OAMPDUs received on this interface with an unsupported op-code. An unsupported opcode OAMPDU is indicated by a valid frame with (1) destination MAC address equal to that of the reserved MAC address for Slow Protocols (See 43B of [802.3ah]), (2) a lengthOrType field equal to the reserved type for Slow Protocols, (3) a Slow Protocols subtype equal to that of the subtype reserved for OAM, and (4) an OAMPDU code equals the opcode for a function that is not supported by the device. Discontinuities of this counter can occur at re-initialization of the management system, and at other times as indicated by the value of the ifCounterDiscontinuityTime. 
.1.3.6.1.4.1.11.2.14.11.15.2.42.3.1.4.1.17,HPN-ICF-EFM-COMMON-MIB::hpnicfDot3OamFramesLostDueToOam,Counter32,read-only,,current,,A count of the number of frames that were dropped by the OAM multiplexer. Since the OAM mulitplexer has multiple inputs and a single output, there may be cases where frames are dropped due to transmit resource contention. This counter is incremented whenever a frame is dropped by the OAM layer. When this counter is incremented, no other counters in this MIB are incremented. Discontinuities of this counter can occur at re-initialization of the management system, and at other times as indicated by the value of the ifCounterDiscontinuityTime. 
.1.3.6.1.4.1.11.2.14.11.15.2.42.3.1.5,HPN-ICF-EFM-COMMON-MIB::hpnicfDot3OamEventConfigTable,,not-accessible,,current,,Ethernet OAM includes the ability to generate and receive event notifications to indicate various link problems. This table contains the mechanisms to configure the thresholds to generate the standard Ethernet OAM events. These events are: - Errored Symbol Period Event. Generated when the number of symbol errors exceeds a threshold within a given window defined by a number of symbols (e.g. 1,000 symbols out of 1,000,000 had errors). - Errored Frame Period Event. Generated when the number of frame errors exceeds a threshold within a given window defined by a number of frames (e.g. 10 frames out of 1000 had errors). - Errored Frame Event. Generated when the number of frame errors exceeds a threshold within a given window defined by a period of time (e.g. 10 frames in 1 second had errors). - Errored Frame Seconds Summary Event. Generated when the number of errored frame seconds exceeds a threshold within a given time period (e.g. 10 errored frame seconds within the last 100 seconds). An errored frame second is defined as a 1 second interval which had >0 frame errors. 
.1.3.6.1.4.1.11.2.14.11.15.2.42.3.1.5.1,HPN-ICF-EFM-COMMON-MIB::hpnicfDot3OamEventConfigEntry,,not-accessible,ifIndex,current,,Event configuration information is available for every Ethernet like interface that supports OAM and the event function of OAM as indicated in the hpnicfDot3OamFunctionsSupported attribute. Event configuration controls when the local management entity sends Event Notification OAMPDUs to its OAM peer. 
.1.3.6.1.4.1.11.2.14.11.15.2.42.3.1.5.1.1,HPN-ICF-EFM-COMMON-MIB::hpnicfDot3OamErrSymPeriodWindowHi,Unsigned32,read-write,,current,,The two objects hpnicfDot3OamErrSymPeriodWindowHi and hpnicfDot3OamErrSymPeriodLo together form an unsigned 64-bit integer representing the number of symbols over which this threshold event is defined. This is defined as hpnicfDot3OamErrSymPeriodWindow = ((2^32)*hpnicfDot3OamErrSymPeriodWindowHi) + hpnicfDot3OamErrSymPeriodWindowLo If hpnicfDot3OamErrSymPeriodThreshold symbol errors occur within a window of hpnicfDot3OamErrSymPeriodWindow symbols, an Event Notification OAMPDU should be generated with an Errored Symbol Period Event TLV indicating the threshold has been crossed in this window. 
.1.3.6.1.4.1.11.2.14.11.15.2.42.3.1.5.1.2,HPN-ICF-EFM-COMMON-MIB::hpnicfDot3OamErrSymPeriodWindowLo,Unsigned32,read-write,,current,,The two objects hpnicfDot3OamErrSymPeriodWindowHi and hpnicfDot3OamErrSymPeriodWindowLo together form an unsigned 64-bit integer representing the number of symbols over which this threshold event is defined. This is defined as hpnicfDot3OamErrSymPeriodWindow = ((2^32)*hpnicfDot3OamErrSymPeriodWindowHi) + hpnicfDot3OamErrSymPeriodWindowLo If hpnicfDot3OamErrSymPeriodThreshold symbol errors occur within a window of hpnicfDot3OamErrSymPeriodWindow symbols, an Event Notification OAMPDU should be generated with an Errored Symbol Period Event TLV indicating the threshold has been crossed in this window. 
.1.3.6.1.4.1.11.2.14.11.15.2.42.3.1.5.1.3,HPN-ICF-EFM-COMMON-MIB::hpnicfDot3OamErrSymPeriodThresholdHi,Unsigned32,read-write,,current,,The two objects hpnicfDot3OamErrSymPeriodThresholdHi and hpnicfDot3OamErrSymPeriodThresholdLo together form an unsigned 64-bit integer representing the number of symbol errors that must occur within a given window to cause this event. This is defined as hpnicfDot3OamErrSymPeriodThreshold = ((2^32) * hpnicfDot3OamErrSymPeriodThresholdHi) + hpnicfDot3OamErrSymPeriodThresholdLo If hpnicfDot3OamErrSymPeriodThreshold symbol errors occur within a window of hpnicfDot3OamErrSymPeriodWindow symbols, an Event Notification OAMPDU should be generated with an Errored Symbol Period Event TLV indicating the threshold has been crossed in this window. 
.1.3.6.1.4.1.11.2.14.11.15.2.42.3.1.5.1.4,HPN-ICF-EFM-COMMON-MIB::hpnicfDot3OamErrSymPeriodThresholdLo,Unsigned32,read-write,,current,,The two objects hpnicfDot3OamErrSymPeriodThresholdHi and hpnicfDot3OamErrSymPeriodThresholdLo together form an unsigned 64-bit integer representing the number of symbol errors that must occur within a given window to cause this event. This is defined as hpnicfDot3OamErrSymPeriodThreshold = ((2^32) * hpnicfDot3OamErrSymPeriodThresholdHi) + hpnicfDot3OamErrSymPeriodThresholdLo If hpnicfDot3OamErrSymPeriodThreshold symbol errors occur within a window of hpnicfDot3OamErrSymPeriodWindow symbols, an Event Notification OAMPDU should be generated with an Errored Symbol Period Event TLV indicating the threshold has been crossed in this window. 
.1.3.6.1.4.1.11.2.14.11.15.2.42.3.1.5.1.5,HPN-ICF-EFM-COMMON-MIB::hpnicfDot3OamErrSymPeriodEvNotifEnable,INTEGER,read-write,,current,enabled(1):disabled(2),Indicates whether the occurence of Errored Symbol Period Events should result in Event Notification OAMPDUs generated by the OAM layer. By default, this object should have the value enabled(1) for Ethernet like interfaces that support OAM. If the OAM layer does not support event notifications (as indicated via the hpnicfDot3OamFunctionsSupported attribute), this value is ignored. 
.1.3.6.1.4.1.11.2.14.11.15.2.42.3.1.5.1.6,HPN-ICF-EFM-COMMON-MIB::hpnicfDot3OamErrFramePeriodWindow,Unsigned32,read-write,,current,,The number of frames over which the threshold is defined. If hpnicfDot3OamErrFramePeriodThreshold frame errors occur within a window of hpnicfDot3OamErrFramePeriodWindow frames, an Event Notification OAMPDU should be generated with an Errored Frame Period Event TLV indicating the threshold has been crossed in this window. 
.1.3.6.1.4.1.11.2.14.11.15.2.42.3.1.5.1.7,HPN-ICF-EFM-COMMON-MIB::hpnicfDot3OamErrFramePeriodThreshold,Unsigned32,read-write,,current,,The number of frame errors that must occur for this event to be triggered. If hpnicfDot3OamErrFramePeriodThreshold frame errors occur within a window of hpnicfDot3OamErrFramePeriodWindow frames, an Event Notification OAMPDU should be generated with an Errored Frame Period Event TLV indicating the threshold has been crossed in this window. 
.1.3.6.1.4.1.11.2.14.11.15.2.42.3.1.5.1.8,HPN-ICF-EFM-COMMON-MIB::hpnicfDot3OamErrFramePeriodEvNotifEnable,INTEGER,read-write,,current,enabled(1):disabled(2),Indicates whether the occurence of an Errored Frame Period Event should result in an Event Notification OAMPDU generated by the OAM layer. By default, this object should have the value enabled(1) for Ethernet like interfaces that support OAM. If the OAM layer does not support event notifications (as indicated via the hpnicfDot3OamFunctionsSupported attribute), this value is ignored. 
.1.3.6.1.4.1.11.2.14.11.15.2.42.3.1.5.1.9,HPN-ICF-EFM-COMMON-MIB::hpnicfDot3OamErrFrameWindow,Unsigned32,read-write,,current,,The amount of time (in 100ms increments) over which the threshold is defined. If hpnicfDot3OamErrFrameThreshold frame errors occur within a window of hpnicfDot3OamErrFrameWindow seconds (measured in tenths of seconds), an Event Notification OAMPDU should be generated with an Errored Frame Event TLV indicating the threshold has been crossed in this window. 
.1.3.6.1.4.1.11.2.14.11.15.2.42.3.1.5.1.10,HPN-ICF-EFM-COMMON-MIB::hpnicfDot3OamErrFrameThreshold,Unsigned32,read-write,,current,,The number of frame errors that must occur for this event to be triggered. If hpnicfDot3OamErrFrameThreshold frame errors occur within a window of hpnicfDot3OamErrFrameWindow (in tenths of seconds), an Event Notification OAMPDU should be generated with an Errored Frame Event TLV indicating the threshold has been crossed in this window. 
.1.3.6.1.4.1.11.2.14.11.15.2.42.3.1.5.1.11,HPN-ICF-EFM-COMMON-MIB::hpnicfDot3OamErrFrameEvNotifEnable,INTEGER,read-write,,current,enabled(1):disabled(2),Indicates whether the occurence of an Errored Frame Event should result in an Event Notification OAMPDU generated by the OAM layer. By default, this object should have the value enabled(1) for Ethernet like interfaces that support OAM. If the OAM layer does not support event notifications (as indicated via the hpnicfDot3OamFunctionsSupported attribute), this value is ignored. 
.1.3.6.1.4.1.11.2.14.11.15.2.42.3.1.5.1.12,HPN-ICF-EFM-COMMON-MIB::hpnicfDot3OamErrFrameSecsSummaryWindow,Integer32,read-write,,current,,The amount of time (in 100ms intervals) over which the threshold is defined. If hpnicfDot3OamErrFrameSecsSummaryThreshold frame errors occur within a window of hpnicfDot3OamErrFrameSecsSummaryWindow (in tenths of seconds), an Event Notification OAMPDU should be generated with an Errored Frame Seconds Summary Event TLV indicating the threshold has been crossed in this window. 
.1.3.6.1.4.1.11.2.14.11.15.2.42.3.1.5.1.13,HPN-ICF-EFM-COMMON-MIB::hpnicfDot3OamErrFrameSecsSummaryThreshold,Integer32,read-write,,current,,The number of errored frame seconds that must occur for this event to be triggered. If hpnicfDot3OamErrFrameSecsSummaryThreshold frame errors occur within a window of hpnicfDot3OamErrFrameSecsSummaryWindow (in tenths of seconds), an Event Notification OAMPDU should be generated with an Errored Frame Seconds Summary Event TLV indicating the threshold has been crossed in this window. 
.1.3.6.1.4.1.11.2.14.11.15.2.42.3.1.5.1.14,HPN-ICF-EFM-COMMON-MIB::hpnicfDot3OamErrFrameSecsEvNotifEnable,INTEGER,read-write,,current,enabled(1):disabled(2),Indicates whether the occurence of an Errored Frame Seconds Summary Event should result in an Event Notification OAMPDU generated by the OAM layer. By default, this object should have the value enabled(1) for Ethernet like interfaces that support OAM. If the OAM layer does not support event notifications (as indicated via the hpnicfDot3OamFunctionsSupported attribute), this value is ignored.
.1.3.6.1.4.1.11.2.14.11.15.2.42.3.1.6,HPN-ICF-EFM-COMMON-MIB::hpnicfDot3OamEventLogTable,,not-accessible,,current,,This table records a history of the events that have occurred at the Ethernet OAM level. These events can include locally detected events, which may result in locally generated OAMPDUs, and remotely detected events, which are detected by the OAM peer entity and signaled to the local entity via Ethernet OAM. Ethernet OAM events can be signaled by Event Notification OAMPDUs or by the flags field in any OAMPDU. 
.1.3.6.1.4.1.11.2.14.11.15.2.42.3.1.6.1,HPN-ICF-EFM-COMMON-MIB::hpnicfDot3OamEventLogEntry,,not-accessible,ifIndex:hpnicfDot3OamEventLogIndex,current,,An entry in the hpnicfDot3OamEventLogTable.
.1.3.6.1.4.1.11.2.14.11.15.2.42.3.1.6.1.1,HPN-ICF-EFM-COMMON-MIB::hpnicfDot3OamEventLogIndex,Unsigned32,not-accessible,,current,,An arbitrary integer for identifiying individual events within the event log. 
.1.3.6.1.4.1.11.2.14.11.15.2.42.3.1.6.1.2,HPN-ICF-EFM-COMMON-MIB::hpnicfDot3OamEventLogTimestamp,OCTET,read-only,,current,,The date and time that this event instance occurred. 
.1.3.6.1.4.1.11.2.14.11.15.2.42.3.1.6.1.3,HPN-ICF-EFM-COMMON-MIB::hpnicfDot3OamEventLogOui,OCTET,read-only,,current,,The OUI of the entity defining the object type. All IEEE 802.3 defined events (as appearing in [802.3ah] except for the Organizationally Unique Event TLVs) use the IEEE 802.3 OUI of 0x0180C2. Organizations defining their own Event Notification TLVs include their OUI in the Event Notification TLV which gets reflected here. 
.1.3.6.1.4.1.11.2.14.11.15.2.42.3.1.6.1.4,HPN-ICF-EFM-COMMON-MIB::hpnicfDot3OamEventLogType,Unsigned32,read-only,,current,,The type of event that generated this entry in the event log. When the OUI is the IEEE 802.3 OUI of 0x0180C2, the following event types are defined: erroredSymbolEvent(1), erroredFramePeriodEvent (2), erroredFrameEvent(3), erroredFrameSecondsEvent(4), linkFault(256), dyingGaspEvent(257), criticalLinkEvent(258) The first four are considered threshold crossing events as they are generated when a metric exceeds a given value within a specified window. The other three are not threshold crossing events. When the OUI is not 0x0180C2, then some other organization has defined the event space. If event subtyping is known to the implementation, it may be reflected here. Otherwise, this value should return all Fs (0xFFFFFFFF). 
.1.3.6.1.4.1.11.2.14.11.15.2.42.3.1.6.1.5,HPN-ICF-EFM-COMMON-MIB::hpnicfDot3OamEventLogLocation,INTEGER,read-only,,current,local(1):remote(2),Whether this event occurred locally, or was received from the OAM peer via Ethernet OAM.
.1.3.6.1.4.1.11.2.14.11.15.2.42.3.1.6.1.6,HPN-ICF-EFM-COMMON-MIB::hpnicfDot3OamEventLogWindowHi,Unsigned32,read-only,,current,,If the event represents a threshold crossing event, the two objects hpnicfDot3OamEventWindowHi and hpnicfDot3OamEventWindowLo form an unsigned 64-bit integer yielding the window over which the value was measured for the threshold crossing event (e.g. 5, when 11 occurrences happened in 5 seconds while the threshold was 10). The two objects are combined as: hpnicfDot3OamEventLogWindow = ((2^32) * hpnicfDot3OamEventLogWindowHi) + hpnicfDot3OamEventLogWindowLo Otherwise, this value is returned as all F's (0xFFFFFFFF) and adds no useful information. 
.1.3.6.1.4.1.11.2.14.11.15.2.42.3.1.6.1.7,HPN-ICF-EFM-COMMON-MIB::hpnicfDot3OamEventLogWindowLo,Unsigned32,read-only,,current,,If the event represents a threshold crossing event, the two objects hpnicfDot3OamEventWindowHi and hpnicfDot3OamEventWindowLo form an unsigned 64-bit integer yielding the window over which the value was measured for the threshold crossing event (e.g. 5, when 11 occurrences happened in 5 seconds while the threshold was 10). The two objects are combined as: hpnicfDot3OamEventLogWindow = ((2^32) * hpnicfDot3OamEventLogWindowHi) + hpnicfDot3OamEventLogWindowLo Otherwise, this value is returned as all F's (0xFFFFFFFF) and adds no useful information. 
.1.3.6.1.4.1.11.2.14.11.15.2.42.3.1.6.1.8,HPN-ICF-EFM-COMMON-MIB::hpnicfDot3OamEventLogThresholdHi,Unsigned32,read-only,,current,,If the event represents a threshold crossing event, the two objects hpnicfDot3OamEventThresholdHi and hpnicfDot3OamEventThresholdLo form an unsigned 64-bit integer yielding the value that was crossed for the threshold crossing event (e.g. 10, when 11 occurrences happened in 5 seconds while the threshold was 10). The two objects are combined as: hpnicfDot3OamEventLogThreshold = ((2^32) * hpnicfDot3OamEventLogThresholdHi) + hpnicfDot3OamEventLogThresholdLo Otherwise, this value is returned as all F's (0xFFFFFFFF) and adds no useful information. 
.1.3.6.1.4.1.11.2.14.11.15.2.42.3.1.6.1.9,HPN-ICF-EFM-COMMON-MIB::hpnicfDot3OamEventLogThresholdLo,Unsigned32,read-only,,current,,If the event represents a threshold crossing event, the two objects hpnicfDot3OamEventThresholdHi and hpnicfDot3OamEventThresholdLo form an unsigned 64-bit integer yielding the value that was crossed for the threshold crossing event (e.g. 10, when 11 occurrences happened in 5 seconds while the threshold was 10). The two objects are combined as: hpnicfDot3OamEventLogThreshold = ((2^32) * hpnicfDot3OamEventLogThresholdHi) + hpnicfDot3OamEventLogThresholdLo Otherwise, this value is returned as all F's (0xFFFFFFFF) and adds no useful information. 
.1.3.6.1.4.1.11.2.14.11.15.2.42.3.1.6.1.10,HPN-ICF-EFM-COMMON-MIB::hpnicfDot3OamEventLogValue,Counter64,read-only,,current,,If the event represents a threshold crossing event, this value indicates the value of the parameter within the given window that generated this event (e.g. 11, when 11 occurrences happened in 5 seconds while the threshold was 10). Otherwise, this value is returned as all F's (0xFFFFFFFFFFFFFFFF) and adds no useful information. 
.1.3.6.1.4.1.11.2.14.11.15.2.42.3.1.6.1.11,HPN-ICF-EFM-COMMON-MIB::hpnicfDot3OamEventLogRunningTotal,Counter64,read-only,,current,,This value respresents the total number of times this occurence has happened since the last reset (e.g. 3253, when 3253 symbol errors have occurred since the last reset, which has resulted in 51 symbol error threshold crossing events since the last reset). 
.1.3.6.1.4.1.11.2.14.11.15.2.42.3.1.6.1.12,HPN-ICF-EFM-COMMON-MIB::hpnicfDot3OamEventLogEventTotal,Unsigned32,read-only,,current,,This value respresents the total number of times one or more of these occurences have resulted in an event (e.g. 51 when 3253 symbol errors have occurred since the last reset, which has resulted in 51 symbol error threshold crossing events since the last reset). 
.1.3.6.1.4.1.11.2.14.11.15.2.42.3.1.7,HPN-ICF-EFM-COMMON-MIB::hpnicfDot3OamTraps,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.2.42.3.1.7.0,HPN-ICF-EFM-COMMON-MIB::hpnicfDot3OamTrapsPrefix,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.2.42.3.1.7.0.1,HPN-ICF-EFM-COMMON-MIB::hpnicfDot3OamThresholdEvent,,,,,,A hpnicfDot3OamThresholdEvent notification is sent when a local or remote threshold crossing event is detected. A local threshold crossing event is detected by the local entity, while a remote threshold crossing event is detected by the reception of an Ethernet OAM Event Notification OAMPDU indicating a threshold event. This notification should not be sent more than once per second. The management entity should periodically check hpnicfDot3OamEventLogTable to detect any missed events.
.1.3.6.1.4.1.11.2.14.11.15.2.42.3.1.7.0.2,HPN-ICF-EFM-COMMON-MIB::hpnicfDot3OamNonThresholdEvent,,,,,,A hpnicfDot3OamNonThresholdEvent notification is sent when a local or remote non-threshold crossing event is detected. A local event is detected by the local entity, while a remote event is detected by the reception of an Ethernet OAM Event Notification OAMPDU indicating a non-threshold crossing event. This notification should not be sent more than once per second. The management entity should periodically check hpnicfDot3OamEventLogTable to detect any missed events.
.1.3.6.1.4.1.11.2.14.11.15.2.42.3.2,HPN-ICF-EFM-COMMON-MIB::hpnicfDot3OamConformance,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.2.42.3.2.1,HPN-ICF-EFM-COMMON-MIB::hpnicfDot3OamGroups,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.2.42.3.2.1.1,HPN-ICF-EFM-COMMON-MIB::hpnicfDot3OamControlGroup,,,,,,A collection of objects providing the abilities, configuration, and status of an Ethernet OAM entity. 
.1.3.6.1.4.1.11.2.14.11.15.2.42.3.2.1.2,HPN-ICF-EFM-COMMON-MIB::hpnicfDot3OamPeerGroup,,,,,,A collection of objects providing the abilities, configuration, and status of a peer Ethernet OAM entity. 
.1.3.6.1.4.1.11.2.14.11.15.2.42.3.2.1.3,HPN-ICF-EFM-COMMON-MIB::hpnicfDot3OamStatsBaseGroup,,,,,,A collection of objects providing the statistics for the number of various transmit and recieve events for OAM on an Ethernet like interface. Note that all of these counters must be supported even if the related function (as described in hpnicfDot3OamFunctionsSupported) is not supported. 
.1.3.6.1.4.1.11.2.14.11.15.2.42.3.2.1.4,HPN-ICF-EFM-COMMON-MIB::hpnicfDot3OamLoopbackGroup,,,,,,A collection of objects for controlling the OAM remote loopback function. 
.1.3.6.1.4.1.11.2.14.11.15.2.42.3.2.1.5,HPN-ICF-EFM-COMMON-MIB::hpnicfDot3OamErrSymbolPeriodEventGroup,,,,,,A collection of objects for configuring the thresholds for an Errored Symbol Period Event. Each [802.3ah] defined Event Notification TLV has its own conformance group because each event can be implemented independently of any other. 
.1.3.6.1.4.1.11.2.14.11.15.2.42.3.2.1.6,HPN-ICF-EFM-COMMON-MIB::hpnicfDot3OamErrFramePeriodEventGroup,,,,,,A collection of objects for configuring the thresholds for an Errored Frame Period Event. Each [802.3ah] defined Event Notification TLV has its own conformance group because each event can be implemented independently of any other. 
.1.3.6.1.4.1.11.2.14.11.15.2.42.3.2.1.7,HPN-ICF-EFM-COMMON-MIB::hpnicfDot3OamErrFrameEventGroup,,,,,,A collection of objects for configuring the thresholds for an Errored Frame Event. Each [802.3ah] defined Event Notification TLV has its own conformance group because each event can be implemented independently of any other. 
.1.3.6.1.4.1.11.2.14.11.15.2.42.3.2.1.8,HPN-ICF-EFM-COMMON-MIB::hpnicfDot3OamErrFrameSecsSummaryEventGroup,,,,,,A collection of objects for configuring the thresholds for an Errored Frame Seconds Summary Event. Each [802.3ah] defined Event Notification TLV has its own conformance group because each event can be implemented independently of any other. 
.1.3.6.1.4.1.11.2.14.11.15.2.42.3.2.1.9,HPN-ICF-EFM-COMMON-MIB::hpnicfDot3OamEventLogGroup,,,,,,A collection of objects for configuring the thresholds for an Errored Frame Seconds Summary Event and maintaining the event information. 
.1.3.6.1.4.1.11.2.14.11.15.2.42.3.2.1.10,HPN-ICF-EFM-COMMON-MIB::hpnicfDot3OamNotificationGroup,,,,,,A collection of notifications used by Ethernet OAM to signal to a management entity that local or remote events have occured on a specified Ethernet link.
.1.3.6.1.4.1.11.2.14.11.15.2.42.3.2.2,HPN-ICF-EFM-COMMON-MIB::hpnicfDot3OamCompliances,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.2.42.3.2.2.1,HPN-ICF-EFM-COMMON-MIB::hpnicfDot3OamCompliance,,,,,,The compliance statement for managed entities supporting OAM on Ethernet like interfaces. 
.1.3.6.1.4.1.11.2.14.11.15.2.42.4,HPN-ICF-EPON-DEVICE-MIB::hpnicfEponDeviceMIB,,,,,,The objects in this MIB module are used to manage Ethernet Passive Optical Network (EPON) devices which are based on the Ethernet in the First Mile (EFM) PON as defined in IEEE Draft P802.3ah/D3.0 clause 60,64,65.  This MIB is excerpted from the draft files directly,only  changed the object name,added the hpnicf as prefix.   The following reference is used throughout this MIB module: [802.3ah] refers to: IEEE Draft P802.3ah/D3.3: 'Draft amendment to - Information technology - Telecommunications and information exchange between systems - Local and metropolitan area networks - Specific requirements - Part 3: Carrier sense multiple access with collision detection (CSMA/CD) access method and physical layer specifications - Media Access Control Parameters, Physical Layers and Management Parameters for subscriber access networks', 22 April 2004. Of particular interest are Clause 64(MPCP) 65(P2mP RS) and 60 (PON PMDs). Clause 30, 'Management', and Clause 45,'Management Data Input/Output (MDIO) Interface'. Copyright (C) The Internet Society (2004). This version of this MIB module is part of XXXX see the RFC itself for full legal notices.
.1.3.6.1.4.1.11.2.14.11.15.2.42.4.1,HPN-ICF-EPON-DEVICE-MIB::hpnicfEponDeviceObjectMIB,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.2.42.4.1.1,HPN-ICF-EPON-DEVICE-MIB::hpnicfEponDeviceObjects,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.2.42.4.1.1.1,HPN-ICF-EPON-DEVICE-MIB::hpnicfEponDeviceControlObjects,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.2.42.4.1.1.1.1,HPN-ICF-EPON-DEVICE-MIB::hpnicfEponDeviceControlTable,,not-accessible,,current,,Table for EPON device MIB modules.
.1.3.6.1.4.1.11.2.14.11.15.2.42.4.1.1.1.1.1,HPN-ICF-EPON-DEVICE-MIB::hpnicfEponDeviceControlEntry,,not-accessible,ifIndex,current,,An entry in the EPON device Control table.
.1.3.6.1.4.1.11.2.14.11.15.2.42.4.1.1.1.1.1.1,HPN-ICF-EPON-DEVICE-MIB::hpnicfEponDeviceObjectReset,INTEGER,read-write,,current,running(1):reset(2),This variable is used to reset the EPON device. The interface may be unavailable while the reset occurs and data may be lost. During reading operation it returns the state of the EPON device. running(1) indicates and operates normal operation, reset(2) indicates and operates reset mode. Writing can be done all the time.
.1.3.6.1.4.1.11.2.14.11.15.2.42.4.1.1.1.1.1.2,HPN-ICF-EPON-DEVICE-MIB::hpnicfEponDeviceObjectModes,INTEGER,read-only,,current,olt(1):onu(2),This variable defines the mode of the EPON device. When an olt(1) it is an Optical Line Terminal device (server) and when an onu(2) and Optical Network Unit device (client)
.1.3.6.1.4.1.11.2.14.11.15.2.42.4.1.1.1.1.1.4,HPN-ICF-EPON-DEVICE-MIB::hpnicfEponDeviceObjectFecEnabled,INTEGER,read-write,,current,noFecEnabled(1):fecTxEnabled(2):fecRxEnabled(3):fecTxRxEnabled(4),This variable defines and provides information whether the EPON device uses FEC as defined in the [802.3ah] clause 65.2 for EPON. When noFECEnabled(1) the device does not support FEC mode When fecTxEnabled(2) the device supports the FEC transmission mode. When fecRxEnabled(3) the device supports the FEC Receive mode. When fecTxRxEnabled(4) the device supports the FEC transmission and receive mode. Writing can be done all the time. This attribute is relevant for an OLT and an ONU.
.1.3.6.1.4.1.11.2.14.11.15.2.42.4.1.1.1.1.1.5,HPN-ICF-EPON-DEVICE-MIB::hpnicfEponDeviceObjectOamMode,INTEGER,read-write,,current,noOam(1):oamServer(2):oamclient(3),This variable defines and provides information on the Operation Administration and Maintenance (OAM) mode of an EPON device as defined by the [802.3ah] clause 57. When noOam(1) the device does not supports the OAM mode. When oamServer(2) the device supports the OAM mode as a server unit. When oamClient(3) the device supports the OAM mode as a client unit. Writing can be done during initialization, hpnicfEponDeviceObjectDeviceReadyMode is in notReady(1) or inProcess(2). This attribute is relevant for an OLT and an ONU.
.1.3.6.1.4.1.11.2.14.11.15.2.42.4.1.1.1.1.1.6,HPN-ICF-EPON-DEVICE-MIB::hpnicfEponDeviceObjectDeviceReadyMode,INTEGER,read-write,,current,notReady(1):inProcess(2):ready(3),This variable defines the mode of an EPON device and provides information on the mode in initialization - ready for registration as defined by the [802.3ah] clause 64. When notReady(1) the device is not ready for operation. When inProcess(2) the device is in initialization process. When ready(3) the device is ready for registration. Writing can be done all the time. This attribute is relevant for an OLT and an ONU.
.1.3.6.1.4.1.11.2.14.11.15.2.42.4.1.1.1.1.1.7,HPN-ICF-EPON-DEVICE-MIB::hpnicfEponDeviceObjectPowerDown,INTEGER,read-write,,current,true(1):false(2),Setting this variable to True(1) will cause Device to be entered into Power down mode where no registration is allowed and only receiving data from the link. Writing can be done all the time. This attribute is relevant for an OLT and an ONU.
.1.3.6.1.4.1.11.2.14.11.15.2.42.4.1.1.1.1.1.8,HPN-ICF-EPON-DEVICE-MIB::hpnicfEponDeviceObjectNumberOfLLIDs,Integer32,read-only,,current,,A read only variable which defines the number of registered LLIDs (as defined by the [802.3ah] clause 65) in a EPON network for an OLT and an ONU. Initialization value is 0. This attribute is relevant for an OLT and an ONU.
.1.3.6.1.4.1.11.2.14.11.15.2.42.4.1.1.1.1.1.9,HPN-ICF-EPON-DEVICE-MIB::hpnicfEponDeviceObjectReportThreshold,Integer32,read-write,,current,,A set of 8 integers, for each LLID, that defines the threshold reporting for each Queue in the REPORT message, as defined in [802.3ah] 64. First Queue set reporting will provide information on the queue occupancy of frames below this Threshold. The value returned shall be in Time quanta (TQ) which is 16nsec or 2 octets increments. Writing can be done all the time. This attribute is relevant for an OLT and an ONU.
.1.3.6.1.4.1.11.2.14.11.15.2.42.4.1.1.1.1.1.10,HPN-ICF-EPON-DEVICE-MIB::hpnicfEponDeviceRemoteMACAddressLLIDControl,INTEGER,read-write,,current,none(1):resetLog(2):useDefaultReporting(3),Indicates and controls the resetting of the LLID MAC address log. Setting this object to none(1) has no action resetLog(2) empties the LLID MAC address log. All data is deleted. Setting it to useDefaultReporting(3) returns all entries priorities to their factory-default reporting. Reading this object always returns useDefaultReporting(3).
.1.3.6.1.4.1.11.2.14.11.15.2.42.4.1.1.1.2,HPN-ICF-EPON-DEVICE-MIB::hpnicfEponDeviceRemoteMACAddressLLIDTable,,not-accessible,,current,,A table of read-only value that identifies the source_address and LLIDs parameter of the remote devices in the network. This MacAddress value, as defined in [802.3ah], 30.3.5.1.5, is updated on reception of a valid frame with a unicast destination Field or (1) a destination Field equal to the reserved multicast address for MAC Control specified in [802.3ah] Annex 31A, (2) lengthOrType field value equal to the reserved Type for MAC Control as specified in [802.3ah] Annex 31A. (3)an MPCP subtype value equal to the subtype reserved for MPCP as specified in [802.3ah] Annex 31A, and an LLID as allocated by the OLT. The table is defined as Remote MAC address - LLID (RMadL) The table is relevant only for an OLT device, and is equivalent from a bridge emulation to the bridge port-MAC address table where the LLIDs are equivalent to virtual bridge ports.
.1.3.6.1.4.1.11.2.14.11.15.2.42.4.1.1.1.2.1,HPN-ICF-EPON-DEVICE-MIB::hpnicfEponDeviceRemoteMACAddressLLIDEntry,,not-accessible,ifIndex,current,,A group of entries. Applications create and delete entries using hpnicfEponDeviceRMadlEntryStatus. When adding objects to an LLID they are added in the persistent order of their index in this table.
.1.3.6.1.4.1.11.2.14.11.15.2.42.4.1.1.1.2.1.1,HPN-ICF-EPON-DEVICE-MIB::hpnicfEponDeviceRemoteMACAddressLLIDName,OCTET,read-create,,current,,A locally-unique, administratively assigned name for a group of entries.
.1.3.6.1.4.1.11.2.14.11.15.2.42.4.1.1.1.2.1.2,HPN-ICF-EPON-DEVICE-MIB::hpnicfEponDeviceRMadlLLID,Unsigned32,read-create,,current,,An arbitrary integer for the purpose of identifying the LLID. Writing can be done all the time.
.1.3.6.1.4.1.11.2.14.11.15.2.42.4.1.1.1.2.1.3,HPN-ICF-EPON-DEVICE-MIB::hpnicfEponDeviceRMadlLogID,OBJECT,read-create,,current,,The object identifier of a MIB module object to add to an entry, indicating the entry ID in the table. Writing can be done all the time.
.1.3.6.1.4.1.11.2.14.11.15.2.42.4.1.1.1.2.1.4,HPN-ICF-EPON-DEVICE-MIB::hpnicfEponDeviceRMadlRemoteAddress,OCTET,read-create,,current,,The remote MAC address of the LLID. Writing can be done all the time.
.1.3.6.1.4.1.11.2.14.11.15.2.42.4.1.1.1.2.1.5,HPN-ICF-EPON-DEVICE-MIB::hpnicfEponDeviceRMadlType,INTEGER,read-create,,current,notRegister(1):registered(2),A list of types for entries - LLIDs. Indicates and defines the state of registration. notRegister(1) marks a non registered LID, registered(2) marks a registered LLID. Writing can be done all the time.
.1.3.6.1.4.1.11.2.14.11.15.2.42.4.1.1.1.2.1.6,HPN-ICF-EPON-DEVICE-MIB::hpnicfEponDeviceRMadlAction,INTEGER,read-create,,current,none(1):register(2):deregister(3):reregister(4),A list of actions for an entry - LLID. Indicates and defines the state of registration for the remote device. none(1) marks no action, register(2) marks to register an LLID, deregister(3) marks to deregister an LLID, reregister(4) marks reregistered LLID. Writing can be done all the time.
.1.3.6.1.4.1.11.2.14.11.15.2.42.4.1.1.1.2.1.7,HPN-ICF-EPON-DEVICE-MIB::hpnicfEponDeviceRMadlEntryStatus,INTEGER,read-create,,current,active(1):notInService(2):notReady(3):createAndGo(4):createAndWait(5):destroy(6),The control that allows creation and deletion of entries. Once made active an entry MAY not be modified except to delete it.
.1.3.6.1.4.1.11.2.14.11.15.2.42.4.1.1.2,HPN-ICF-EPON-DEVICE-MIB::hpnicfEponDeviceStatObjects,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.2.42.4.1.1.2.1,HPN-ICF-EPON-DEVICE-MIB::hpnicfEponDeviceStatTable,,not-accessible,,current,,This table defines the list of statistics counters of EPON devices. The attributes are relevant for an OLT and an ONU.
.1.3.6.1.4.1.11.2.14.11.15.2.42.4.1.1.2.1.1,HPN-ICF-EPON-DEVICE-MIB::hpnicfEponDeviceStatEntry,,not-accessible,ifIndex,current,,Table entries for Table of statistics counters of EPON devices.
.1.3.6.1.4.1.11.2.14.11.15.2.42.4.1.1.2.1.1.1,HPN-ICF-EPON-DEVICE-MIB::hpnicfEponDeviceStatTxFramesQueue0,Counter32,read-only,,current,,A count of the number of times a -Queue-0- frames transmission occurs. Increment the counter by one for each frame transmitted which is an output of -Queue-0-. The -Queue-0- marking matched the REPORT MPCP message Queue-0 field, as defined in [802.3ah] clause 64. This counter is mandatory for an ONU.
.1.3.6.1.4.1.11.2.14.11.15.2.42.4.1.1.2.1.1.2,HPN-ICF-EPON-DEVICE-MIB::hpnicfEponDeviceStatTxFramesQueue1,Counter32,read-only,,current,,A count of the number of times a -Queue-1- frames transmission occurs. Increment the counter by one for each frame transmitted which is an output of -Queue-1-. The -Queue-1- marking matched the REPORT MPCP message Queue-1 field, as defined in [802.3ah] clause 64. This counter is mandatory for an ONU.
.1.3.6.1.4.1.11.2.14.11.15.2.42.4.1.1.2.1.1.3,HPN-ICF-EPON-DEVICE-MIB::hpnicfEponDeviceStatTxFramesQueue2,Counter32,read-only,,current,,A count of the number of times a -Queue-2- frames transmission occurs. Increment the counter by one for each frame transmitted which is an output of -Queue-2-. The -Queue-2- marking matched the REPORT MPCP message Queue-2 field, as defined in [802.3ah] clause 64. This counter is mandatory for an ONU.
.1.3.6.1.4.1.11.2.14.11.15.2.42.4.1.1.2.1.1.4,HPN-ICF-EPON-DEVICE-MIB::hpnicfEponDeviceStatTxFramesQueue3,Counter32,read-only,,current,,A count of the number of times a -Queue-3- frames transmission occurs. Increment the counter by one for each frame transmitted which is an output of -Queue-3-. The -Queue-3- marking matched the REPORT MPCP message Queue-3 field, as defined in [802.3ah] clause 64. This counter is mandatory for an ONU.
.1.3.6.1.4.1.11.2.14.11.15.2.42.4.1.1.2.1.1.5,HPN-ICF-EPON-DEVICE-MIB::hpnicfEponDeviceStatTxFramesQueue4,Counter32,read-only,,current,,A count of the number of times a -Queue-4- frames transmission occurs. Increment the counter by one for each frame transmitted which is an output of -Queue-4-. The -Queue-4- marking matched the REPORT MPCP message Queue-4 field, as defined in [802.3ah] clause 64. This counter is mandatory for an ONU.
.1.3.6.1.4.1.11.2.14.11.15.2.42.4.1.1.2.1.1.6,HPN-ICF-EPON-DEVICE-MIB::hpnicfEponDeviceStatTxFramesQueue5,Counter32,read-only,,current,,A count of the number of times a -Queue-5- frames transmission occurs. Increment the counter by one for each frame transmitted which is an output of -Queue-5-. The -Queue-5- marking matched the REPORT MPCP message Queue-5 field, as defined in [802.3ah] clause 64. This counter is mandatory for an ONU.
.1.3.6.1.4.1.11.2.14.11.15.2.42.4.1.1.2.1.1.7,HPN-ICF-EPON-DEVICE-MIB::hpnicfEponDeviceStatTxFramesQueue6,Counter32,read-only,,current,,A count of the number of times a -Queue-6- frames transmission occurs. Increment the counter by one for each frame transmitted which is an output of -Queue-6-. The -Queue-6- marking matched the REPORT MPCP message Queue-6 field, as defined in [802.3ah] clause 64. This counter is mandatory for an ONU.
.1.3.6.1.4.1.11.2.14.11.15.2.42.4.1.1.2.1.1.8,HPN-ICF-EPON-DEVICE-MIB::hpnicfEponDeviceStatTxFramesQueue7,Counter32,read-only,,current,,A count of the number of times a -Queue-7- frames transmission occurs. Increment the counter by one for each frame transmitted which is an output of -Queue-7-. The -Queue-7- marking matched the REPORT MPCP message Queue-7 field, as defined in [802.3ah] clause 64. This counter is mandatory for an ONU.
.1.3.6.1.4.1.11.2.14.11.15.2.42.4.1.1.2.1.1.9,HPN-ICF-EPON-DEVICE-MIB::hpnicfEponDeviceStatRxFramesQueue0,Counter32,read-only,,current,,A count of the number of times a -Queue-0- frames reception occurs. A single counter at the ONU and a set of counters, one for each LLID, at the OLT. Increment the counter by one for each frame received for each LLID, which is an output of -Queue-0-. The -Queue-0- marking matched the REPORT MPCP message Queue-0 field, as defined in [802.3ah] clause 64. This counter is mandatory for an ONU and an OLT.
.1.3.6.1.4.1.11.2.14.11.15.2.42.4.1.1.2.1.1.10,HPN-ICF-EPON-DEVICE-MIB::hpnicfEponDeviceStatRxFramesQueue1,Counter32,read-only,,current,,A count of the number of times a -Queue-1- frames reception occurs. A single counter at the ONU and a set of counters, one for each LLID, at the OLT. Increment the counter by one for each frame received for each LLID, which is an output of -Queue-1-. The -Queue-1- marking matched the REPORT MPCP message Queue-1 field, as defined in [802.3ah] clause 64. This counter is mandatory for an ONU and an OLT.
.1.3.6.1.4.1.11.2.14.11.15.2.42.4.1.1.2.1.1.11,HPN-ICF-EPON-DEVICE-MIB::hpnicfEponDeviceStatRxFramesQueue2,Counter32,read-only,,current,,A count of the number of times a -Queue-2- frames reception occurs. A single counter at the ONU and a set of counters, one for each LLID, at the OLT. Increment the counter by one for each frame received for each LLID, which is an output of -Queue-2-. The -Queue-2- marking matched the REPORT MPCP message Queue-2 field, as defined in [802.3ah] clause 64. This counter is mandatory for an ONU and an OLT.
.1.3.6.1.4.1.11.2.14.11.15.2.42.4.1.1.2.1.1.12,HPN-ICF-EPON-DEVICE-MIB::hpnicfEponDeviceStatRxFramesQueue3,Counter32,read-only,,current,,A count of the number of times a -Queue-3- frames reception occurs. A single counter at the ONU and a set of counters, one for each LLID, at the OLT. Increment the counter by one for each frame received for each LLID, which is an output of -Queue-3-. The -Queue-3- marking matched the REPORT MPCP message Queue-3 field, as defined in [802.3ah] clause 64. This counter is mandatory for an ONU and an OLT.
.1.3.6.1.4.1.11.2.14.11.15.2.42.4.1.1.2.1.1.13,HPN-ICF-EPON-DEVICE-MIB::hpnicfEponDeviceStatRxFramesQueue4,Counter32,read-only,,current,,A count of the number of times a -Queue-4- frames reception occurs. A single counter at the ONU and a set of counters, one for each LLID, at the OLT. Increment the counter by one for each frame received for each LLID, which is an output of -Queue-4-. The -Queue-4- marking matched the REPORT MPCP message Queue-4 field, as defined in [802.3ah] clause 64. This counter is mandatory for an ONU and an OLT.
.1.3.6.1.4.1.11.2.14.11.15.2.42.4.1.1.2.1.1.14,HPN-ICF-EPON-DEVICE-MIB::hpnicfEponDeviceStatRxFramesQueue5,Counter32,read-only,,current,,A count of the number of times a -Queue-5- frames reception occurs. A single counter at the ONU and a set of counters, one for each LLID, at the OLT. Increment the counter by one for each frame received for each LLID, which is an output of -Queue-5-. The -Queue-5- marking matched the REPORT MPCP message Queue-5 field, as defined in [802.3ah] clause 64. This counter is mandatory for an ONU and an OLT.
.1.3.6.1.4.1.11.2.14.11.15.2.42.4.1.1.2.1.1.15,HPN-ICF-EPON-DEVICE-MIB::hpnicfEponDeviceStatRxFramesQueue6,Counter32,read-only,,current,,A count of the number of times a -Queue-6- frames reception occurs. A single counter at the ONU and a set of counters, one for each LLID, at the OLT. Increment the counter by one for each frame received for each LLID, which is an output of -Queue-6-. The -Queue-6- marking matched the REPORT MPCP message Queue-6 field, as defined in [802.3ah] clause 64. This counter is mandatory for an ONU and an OLT.
.1.3.6.1.4.1.11.2.14.11.15.2.42.4.1.1.2.1.1.16,HPN-ICF-EPON-DEVICE-MIB::hpnicfEponDeviceStatRxFramesQueue7,Counter32,read-only,,current,,A count of the number of times a -Queue-7- frames reception occurs. A single counter at the ONU and a set of counters, one for each LLID, at the OLT. Increment the counter by one for each frame received for each LLID, which is an output of -Queue-7-. The -Queue-7- marking matched the REPORT MPCP message Queue-7 field, as defined in [802.3ah] clause 64. This counter is mandatory for an ONU and an OLT.
.1.3.6.1.4.1.11.2.14.11.15.2.42.4.1.1.2.1.1.17,HPN-ICF-EPON-DEVICE-MIB::hpnicfEponDeviceStatDroppedFramesQueue0,Counter32,read-only,,current,,A count of the number of times a -Queue-0- frames drops occurs. Increment the counter by one for each frame dropped from -Queue-0-. The -Queue-0- marking matched the REPORT MPCP message Queue-0 field, as defined in [802.3ah] clause 64. This counter is mandatory for an ONU.
.1.3.6.1.4.1.11.2.14.11.15.2.42.4.1.1.2.1.1.18,HPN-ICF-EPON-DEVICE-MIB::hpnicfEponDeviceStatDroppedFramesQueue1,Counter32,read-only,,current,,A count of the number of times a -Queue-1- frames drops occurs. Increment the counter by one for each frame dropped from -Queue-1-. The -Queue-1- marking matched the REPORT MPCP message Queue-1 field, as defined in [802.3ah] clause 64. This counter is mandatory for an ONU.
.1.3.6.1.4.1.11.2.14.11.15.2.42.4.1.1.2.1.1.19,HPN-ICF-EPON-DEVICE-MIB::hpnicfEponDeviceStatDroppedFramesQueue2,Counter32,read-only,,current,,A count of the number of times a -Queue-2- frames drops occurs. Increment the counter by one for each frame dropped from -Queue-2-. The -Queue-2- marking matched the REPORT MPCP message Queue-2 field, as defined in [802.3ah] clause 64. This counter is mandatory for an ONU.
.1.3.6.1.4.1.11.2.14.11.15.2.42.4.1.1.2.1.1.20,HPN-ICF-EPON-DEVICE-MIB::hpnicfEponDeviceStatDroppedFramesQueue3,Counter32,read-only,,current,,A count of the number of times a -Queue-3- frames drops occurs. Increment the counter by one for each frame dropped from -Queue-3-. The -Queue-3- marking matched the REPORT MPCP message Queue-3 field, as defined in [802.3ah] clause 64. This counter is mandatory for an ONU.
.1.3.6.1.4.1.11.2.14.11.15.2.42.4.1.1.2.1.1.21,HPN-ICF-EPON-DEVICE-MIB::hpnicfEponDeviceStatDroppedFramesQueue4,Counter32,read-only,,current,,A count of the number of times a -Queue-4- frames drops occurs. Increment the counter by one for each frame dropped from -Queue-4-. The -Queue-4- marking matched the REPORT MPCP message Queue-4 field, as defined in [802.3ah] clause 64. This counter is mandatory for an ONU.
.1.3.6.1.4.1.11.2.14.11.15.2.42.4.1.1.2.1.1.22,HPN-ICF-EPON-DEVICE-MIB::hpnicfEponDeviceStatDroppedFramesQueue5,Counter32,read-only,,current,,A count of the number of times a -Queue-5- frames drops occurs. Increment the counter by one for each frame dropped from -Queue-5-. The -Queue-5- marking matched the REPORT MPCP message Queue-5 field, as defined in [802.3ah] clause 64. This counter is mandatory for an ONU.
.1.3.6.1.4.1.11.2.14.11.15.2.42.4.1.1.2.1.1.23,HPN-ICF-EPON-DEVICE-MIB::hpnicfEponDeviceStatDroppedFramesQueue6,Counter32,read-only,,current,,A count of the number of times a -Queue-6- frames drops occurs. Increment the counter by one for each frame dropped from -Queue-6-. The -Queue-6- marking matched the REPORT MPCP message Queue-6 field, as defined in [802.3ah] clause 64. This counter is mandatory for an ONU.
.1.3.6.1.4.1.11.2.14.11.15.2.42.4.1.1.2.1.1.24,HPN-ICF-EPON-DEVICE-MIB::hpnicfEponDeviceStatDroppedFramesQueue7,Counter32,read-only,,current,,A count of the number of times a -Queue-7- frames drops occurs. Increment the counter by one for each frame dropped from -Queue-7-. The -Queue-7- marking matched the REPORT MPCP message Queue-7 field, as defined in [802.3ah] clause 64. This counter is mandatory for an ONU.
.1.3.6.1.4.1.11.2.14.11.15.2.42.4.1.1.3,HPN-ICF-EPON-DEVICE-MIB::hpnicfEponDeviceEventObjects,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.2.42.4.1.1.3.1,HPN-ICF-EPON-DEVICE-MIB::hpnicfEponDeviceEventObjectTable,,not-accessible,,current,,This table defines the Event Objects for EPON devices. The attributes are relevant for an OLT and an ONU.
.1.3.6.1.4.1.11.2.14.11.15.2.42.4.1.1.3.1.1,HPN-ICF-EPON-DEVICE-MIB::hpnicfEponDeviceEventObjectEntry,,not-accessible,ifIndex,current,,Table entries for Table of Event objects for EPON devices.
.1.3.6.1.4.1.11.2.14.11.15.2.42.4.1.1.3.1.1.1,HPN-ICF-EPON-DEVICE-MIB::hpnicfEponDeviceSampleMinimum,Integer32,read-write,,current,,The minimum Frequency of events this system will accept. A system may use the larger values of this minimum to lessen the impact of constant sampling. For larger sampling intervals the system samples less often and suffers less overhead. Unless explicitly resource limited, a system's value for this object SHOULD be 1, allowing as small as a 1 second interval for ongoing trigger sampling. Writing of the value can be done all the time.
.1.3.6.1.4.1.11.2.14.11.15.2.42.4.1.1.3.1.1.2,HPN-ICF-EPON-DEVICE-MIB::hpnicfEponDeviceDyingGaspAlarmState,INTEGER,read-only,,current,true(1):false(2),A read-only variable, which defines the state of the Dying Gasp indication of the OAM alarm indications as described in the [802.3ah] clause 57. When true the device has a dying gasp alarm asserted. When false the dying gasp alarm is reset 
.1.3.6.1.4.1.11.2.14.11.15.2.42.4.1.1.3.1.1.3,HPN-ICF-EPON-DEVICE-MIB::hpnicfEponDeviceDyingGaspAlarmEnabled,INTEGER,read-write,,current,true(1):false(2),A control to allow DyingGaspAlarm event to be used. When the value is true the event is sampled. When the value is false the event is not sampled. Writing can be done all the time.
.1.3.6.1.4.1.11.2.14.11.15.2.42.4.1.1.3.1.1.4,HPN-ICF-EPON-DEVICE-MIB::hpnicfEponDeviceCriticalEventState,INTEGER,read-only,,current,true(1):false(2),A read-only variable, which defines the state of the Critical Event indication of the OAM alarm indications as described in the [802.3ah] clause 57. When true the device has a Critical Event asserted. When false the Critical Event is reset.
.1.3.6.1.4.1.11.2.14.11.15.2.42.4.1.1.3.1.1.5,HPN-ICF-EPON-DEVICE-MIB::hpnicfEponDeviceCriticalEventEnabled,INTEGER,read-write,,current,true(1):false(2),A control to allow CriticalEvent event to be used. When the value is true the event is sampled. When the value is false the event is not sampled. Writing can be done all the time.
.1.3.6.1.4.1.11.2.14.11.15.2.42.4.1.1.3.1.1.6,HPN-ICF-EPON-DEVICE-MIB::hpnicfEponDeviceLocalLinkFaultAlarmState,INTEGER,read-only,,current,true(1):false(2),A read-only variable, which defines the state of the Local Link Fault indication of the OAM alarm indications as described in the [802.3ah] clause 57. When true the device has a Local Link Fault alarm asserted. When false the Local Link Fault alarm is reset.
.1.3.6.1.4.1.11.2.14.11.15.2.42.4.1.1.3.1.1.7,HPN-ICF-EPON-DEVICE-MIB::hpnicfEponDeviceLocalLinkFaultAlarmEnabled,INTEGER,read-write,,current,true(1):false(2),A control to allow LocalLinkFaultAlarm event to be used. When the value is true the event is sampled. When the value is false the event is not sampled. Writing can be done all the time.
.1.3.6.1.4.1.11.2.14.11.15.2.42.4.1.1.3.1.1.8,HPN-ICF-EPON-DEVICE-MIB::hpnicfEponDeviceTemperatureEventIndicationState,INTEGER,read-only,,current,true(1):false(2),A read-only variable, which defines the state of the Temperature Event indication of an EPON device. When condition of box temperature is above the threshold defined the alarm is asserted. When the condition is below that threshold the alarm is de-asserted. When true the device has a Temperature Event Indication asserted. When false the Temperature Event Indication is reset.
.1.3.6.1.4.1.11.2.14.11.15.2.42.4.1.1.3.1.1.9,HPN-ICF-EPON-DEVICE-MIB::hpnicfEponDeviceTemperatureEventIndicationEnabled,INTEGER,read-write,,current,true(1):false(2),A control to allow TemperatureEventIndication event to be used. When the value is true the event is sampled. When the value is false the event is not sampled. Writing can be done all the time.
.1.3.6.1.4.1.11.2.14.11.15.2.42.4.1.1.3.1.1.10,HPN-ICF-EPON-DEVICE-MIB::hpnicfEponDevicePowerVoltageEventIndicationState,INTEGER,read-only,,current,true(1):false(2),A read-only variable, which defines the state of the Power/Voltage Event Indication of an EPON device. When condition of box Power/voltage is above the threshold defined the alarm is asserted. When the condition is below that threshold the alarm is de-asserted. When true the device has a Power/Voltage Event Indication asserted. When false the Power/Voltage Event Indication is reset. 
.1.3.6.1.4.1.11.2.14.11.15.2.42.4.1.1.3.1.1.11,HPN-ICF-EPON-DEVICE-MIB::hpnicfEponDevicePowerVoltageEventIndicationEnabled,INTEGER,read-write,,current,true(1):false(2),A control to allow PowerVoltageEventIndication event to be used. When the value is true the event is sampled. When the value is false the event is not sampled. Writing can be done all the time.
.1.3.6.1.4.1.11.2.14.11.15.2.42.4.1.1.3.1.1.12,HPN-ICF-EPON-DEVICE-MIB::hpnicfEponDeviceGlobalEventState,INTEGER,read-only,,current,true(1):false(2),A read-only variable, which defines the state of the Global Event indication of an EPON device. When the indication of the event input occurs the event is asserted. When the input is removed that event is de-asserted. When true the device has a Global Event asserted. When false the Global Event Indication is reset.
.1.3.6.1.4.1.11.2.14.11.15.2.42.4.1.1.3.1.1.13,HPN-ICF-EPON-DEVICE-MIB::hpnicfEponDeviceGlobalEventEnabled,INTEGER,read-write,,current,true(1):false(2),A control to allow GlobalEvent event to be used. When the value is true the event is sampled. When the value is false the event is not sampled. Writing can be done all the time.
.1.3.6.1.4.1.11.2.14.11.15.2.42.4.1.1.3.1.1.14,HPN-ICF-EPON-DEVICE-MIB::hpnicfEponDeviceErroredSymbolPeriodEventState,INTEGER,read-only,,current,true(1):false(2),A read-only variable, which defines the state of the Errored Symbol Period Event indication of the OAM alarm TLV indications as described in the [802.3ah] clause 57.5.3. When true the device has an Errored Symbol Period Event asserted. When false the Errored Symbol Period Event is reset.
.1.3.6.1.4.1.11.2.14.11.15.2.42.4.1.1.3.1.1.15,HPN-ICF-EPON-DEVICE-MIB::hpnicfEponDeviceErroredSymbolPeriodEventEnabled,INTEGER,read-write,,current,true(1):false(2),A control to allow ErroredSymbolPeriodEvent event to be used. When the value is true the event is sampled. When the value is false the event is not sampled. Writing can be done all the time.
.1.3.6.1.4.1.11.2.14.11.15.2.42.4.1.1.3.1.1.16,HPN-ICF-EPON-DEVICE-MIB::hpnicfEponDeviceErroredFrameEventState,INTEGER,read-only,,current,true(1):false(2),A read-only variable, which defines the state of the Errored Frame Event indication of the OAM alarm TLV indications as described in the [802.3ah] clause 57.5.3. When true the device has an Errored Frame Event asserted. When false the Errored Frame Event is reset.
.1.3.6.1.4.1.11.2.14.11.15.2.42.4.1.1.3.1.1.17,HPN-ICF-EPON-DEVICE-MIB::hpnicfEponDeviceErroredFrameEventEnabled,INTEGER,read-write,,current,true(1):false(2),A control to allow ErroredFrameEvent event to be used. When the value is true the event is sampled. When the value is false the event is not sampled. Writing can be done all the time.
.1.3.6.1.4.1.11.2.14.11.15.2.42.4.1.1.3.1.1.18,HPN-ICF-EPON-DEVICE-MIB::hpnicfEponDeviceErroredFramePeriodEventState,INTEGER,read-only,,current,true(1):false(2),A read-only variable, which defines the state of the Errored Frame Period Event indication of the OAM alarm TLV indications as described in the [802.3ah] clause 57.5.3. When true the device has an Errored Frame Period Event asserted. When false the Errored Frame Period Event is reset.
.1.3.6.1.4.1.11.2.14.11.15.2.42.4.1.1.3.1.1.19,HPN-ICF-EPON-DEVICE-MIB::hpnicfEponDeviceErroredFramePeriodEventEnabled,INTEGER,read-write,,current,true(1):false(2),A control to allow ErroredFramePeriodEvent event to be used. When the value is true the event is sampled. When the value is false the event is not sampled. Writing can be done all the time.
.1.3.6.1.4.1.11.2.14.11.15.2.42.4.1.1.3.1.1.20,HPN-ICF-EPON-DEVICE-MIB::hpnicfEponDeviceErroredFrameSecondsSummaryEventState,INTEGER,read-only,,current,true(1):false(2),A read-only variable, which defines the state of the Errored Frame Seconds Summary Event indication of the OAM alarm TLV indications as described in the [802.3ah] clause 57.5.3. When true the device has an Errored Frame Seconds Summary Event asserted. When false the Errored Frame Seconds Summary Event is reset.
.1.3.6.1.4.1.11.2.14.11.15.2.42.4.1.1.3.1.1.21,HPN-ICF-EPON-DEVICE-MIB::hpnicfEponDeviceErroredFrameSecondsSummaryEventEnabled,INTEGER,read-write,,current,true(1):false(2),A control to allow ErroredFrameSecondsSummaryEvent event to be used. When the value is true the event is sampled. When the value is false the event is not sampled. Writing can be done all the time.
.1.3.6.1.4.1.11.2.14.11.15.2.42.4.1.1.3.1.1.22,HPN-ICF-EPON-DEVICE-MIB::hpnicfEponDeviceOrganizationSpecificEventState,INTEGER,read-only,,current,true(1):false(2),A read-only variable, which defines the state of the Organization Specific Event indication of the OAM alarm TLV indications as described in the [802.3ah] clause 57.5.3. When true the device has an Organization Specific Event asserted. When false the Organization Specific Event is reset.
.1.3.6.1.4.1.11.2.14.11.15.2.42.4.1.1.3.1.1.23,HPN-ICF-EPON-DEVICE-MIB::hpnicfEponDeviceOrganizationSpecificEventEnabled,INTEGER,read-write,,current,true(1):false(2),A control to allow OrganizationSpecificEvent event to be used. When the value is true the event is sampled. When the value is false the event is not sampled. Writing can be done all the time.
.1.3.6.1.4.1.11.2.14.11.15.2.42.4.1.1.3.1.1.24,HPN-ICF-EPON-DEVICE-MIB::hpnicfEponDeviceEventControl,INTEGER,read-write,,current,none(1):resetLog(2):useDefaultReporting(3),Indicates and controls the resetting of the Event log. Setting this object to none(1) has no action resetLog(2) empties the event log. All data is deleted. Setting it to useDefaultReporting(3) returns all event priorities to their factory-default reporting. Reading this object always returns useDefaultReporting(3).
.1.3.6.1.4.1.11.2.14.11.15.2.42.4.1.1.3.2,HPN-ICF-EPON-DEVICE-MIB::hpnicfEponDeviceEventsLogTable,,not-accessible,,current,,A table of objects provides a log of notification based on the event as pointed to by entries in those tables. The intent is a MAC level event log (set of events to when they happened). This attribute is relevant for an OLT and an ONU.
.1.3.6.1.4.1.11.2.14.11.15.2.42.4.1.1.3.2.1,HPN-ICF-EPON-DEVICE-MIB::hpnicfEponDeviceEventsLogEntry,,not-accessible,hpnicfEponDeviceEventsLogName:hpnicfEponDeviceEventsLogIndex,current,,A group of Events. Applications create and delete entries using hpnicfEponDeviceEventsEntryStatus. When adding objects to a notification they are added in the lexical order of their index in this table.
.1.3.6.1.4.1.11.2.14.11.15.2.42.4.1.1.3.2.1.1,HPN-ICF-EPON-DEVICE-MIB::hpnicfEponDeviceEventsLogName,OCTET,not-accessible,,current,,A locally-unique, administratively assigned name for a group of Events.
.1.3.6.1.4.1.11.2.14.11.15.2.42.4.1.1.3.2.1.2,HPN-ICF-EPON-DEVICE-MIB::hpnicfEponDeviceEventsLogIndex,Unsigned32,not-accessible,,current,,An arbitrary integer for the purpose of identifying individual Events within a hpnicfEponDeviceEventsLogName group. Events within a group are placed in the notification in the numerical order of this index.
.1.3.6.1.4.1.11.2.14.11.15.2.42.4.1.1.3.2.1.3,HPN-ICF-EPON-DEVICE-MIB::hpnicfEponDeviceEventsLogID,OBJECT,read-create,,current,,The object identifier of a MIB module object to add to a Notification that results from the event. Writing can be done all the time.
.1.3.6.1.4.1.11.2.14.11.15.2.42.4.1.1.3.2.1.4,HPN-ICF-EPON-DEVICE-MIB::hpnicfEponDeviceEventsLogFirstTime,OCTET,read-only,,current,,The time that an entry was created.
.1.3.6.1.4.1.11.2.14.11.15.2.42.4.1.1.3.2.1.5,HPN-ICF-EPON-DEVICE-MIB::hpnicfEponDeviceEventsLogLastTime,OCTET,read-only,,current,,If multiple events are reported via the same entry, the time that the last event for this entry occurred, otherwise this should have the same value as hpnicfEponDeviceEventsLogFirstTime.
.1.3.6.1.4.1.11.2.14.11.15.2.42.4.1.1.3.2.1.6,HPN-ICF-EPON-DEVICE-MIB::hpnicfEponDeviceEventsLogCounts,Counter32,read-only,,current,,The number of consecutive event instances reported by this entry. This starts at 1 with the creation of this row and increments by 1 for each subsequent duplicate event.
.1.3.6.1.4.1.11.2.14.11.15.2.42.4.1.1.3.2.1.7,HPN-ICF-EPON-DEVICE-MIB::hpnicfEponDeviceEventsLogType,INTEGER,read-only,,current,hpnicfEponDeviceDyingGaspAlarmState(1):hpnicfEponDeviceCriticalEventState(2):hpnicfEponDeviceLocalLinkFaultAlarmState(3):hpnicfEponDeviceTemperatureEventIndicationState(4):hpnicfEponDevicePowerVoltageEventIndicationState(5):hpnicfEponDeviceGlobalEventState(6):hpnicfEponDeviceErroredSymbolPeriodEventState(7):hpnicfEponDeviceErroredFrameEventState(8):hpnicfEponDeviceErroredFramePeriodEventState(9):hpnicfEponDeviceErroredFrameSecondsSummaryEventState(10):hpnicfEponDeviceOrganizationSpecificEventState(11),A list of types for Events. Events are ordered according to their significance where 1 is the highest severity. hpnicfEponDeviceDyingGaspAlarmState(1) indicates a Dying Gasp Alarm State, hpnicfEponDeviceCriticalEventState(2) indicates a Critical Event State, hpnicfEponDeviceLocalLinkFaultAlarmState(3) indicates a Local Link Fault Alarm State, hpnicfEponDeviceTemperatureEventIndicationState(4) indicates a Temperature Event Indication State, hpnicfEponDevicePowerVoltageEventIndicationState(5) indicates a Power Voltage Event Indication State, hpnicfEponDeviceGlobalEventState(6) indicates a Global Event State, hpnicfEponDeviceErroredSymbolPeriodEventState(7) indicates an Errored Symbol Period Event State, hpnicfEponDeviceErroredFrameEventState(8) indicates an Errored Frame Event State, hpnicfEponDeviceErroredFramePeriodEventState(9) indicates an Errored Frame Period Event State, hpnicfEponDeviceErroredFrameSecondsSummaryEventState(10) indicates an Errored Frame Seconds Summary Event State, hpnicfEponDeviceOrganizationSpecificEventState(11) indicates an Organization Specific Event State. 
.1.3.6.1.4.1.11.2.14.11.15.2.42.4.1.1.3.2.1.8,HPN-ICF-EPON-DEVICE-MIB::hpnicfEponDeviceEventsLogEntryStatus,INTEGER,read-create,,current,active(1):notInService(2):notReady(3):createAndGo(4):createAndWait(5):destroy(6),The control that allows creation and deletion of entries. Once made active an entry MAY not be modified except to delete it.
.1.3.6.1.4.1.11.2.14.11.15.2.42.4.1.2,HPN-ICF-EPON-DEVICE-MIB::hpnicfEponDeviceConformance,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.2.42.4.1.2.1,HPN-ICF-EPON-DEVICE-MIB::hpnicfEponDeviceGroups,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.2.42.4.1.2.1.1,HPN-ICF-EPON-DEVICE-MIB::hpnicfEponDeviceGroupControl,,,,,,A collection of objects of hpnicfEponDevice control definition.
.1.3.6.1.4.1.11.2.14.11.15.2.42.4.1.2.1.2,HPN-ICF-EPON-DEVICE-MIB::hpnicfEponDeviceGroupRMadLTable,,,,,,A collection of objects of hpnicfEponDevice remote Mac address to LLID table.
.1.3.6.1.4.1.11.2.14.11.15.2.42.4.1.2.1.3,HPN-ICF-EPON-DEVICE-MIB::hpnicfEponDeviceGroupStat,,,,,,A collection of objects of EPON device Statistics
.1.3.6.1.4.1.11.2.14.11.15.2.42.4.1.2.1.4,HPN-ICF-EPON-DEVICE-MIB::hpnicfEponDeviceGroupEvent,,,,,,A collection of objects for EPON device Events
.1.3.6.1.4.1.11.2.14.11.15.2.42.4.1.2.1.5,HPN-ICF-EPON-DEVICE-MIB::hpnicfEponDeviceGroupEventLog,,,,,,A collection of objects for EPON device Events log
.1.3.6.1.4.1.11.2.14.11.15.2.42.4.1.2.2,HPN-ICF-EPON-DEVICE-MIB::hpnicfEponDeviceCompliances,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.2.42.4.1.2.2.1,HPN-ICF-EPON-DEVICE-MIB::hpnicfEponDeviceCompliance,,,,,,The compliance statement for EPON Devices.
.1.3.6.1.4.1.11.2.14.11.15.2.42.5,HPN-ICF-EPON-UNI-MIB::hpnicfEponUni,,,,,,The objects in this MIB module are used to manage and display current configuration of UNI (user network interface) which is based on the ONU(Optical Network Unit).
.1.3.6.1.4.1.11.2.14.11.15.2.42.5.1,HPN-ICF-EPON-UNI-MIB::hpnicfEponUniSysMan,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.2.42.5.1.1,HPN-ICF-EPON-UNI-MIB::hpnicfEponUniSysManTable,,not-accessible,,current,,This table defines several UNI system parameters.
.1.3.6.1.4.1.11.2.14.11.15.2.42.5.1.1.1,HPN-ICF-EPON-UNI-MIB::hpnicfEponUniSysManEntry,,not-accessible,ifIndex:hpnicfEponUniIndex,current,,The entry of hpnicfEponUniSysManTable.
.1.3.6.1.4.1.11.2.14.11.15.2.42.5.1.1.1.1,HPN-ICF-EPON-UNI-MIB::hpnicfEponUniIndex,Integer32,accessible-for-notify,,current,,The index value which uniquely identifies the FE(fast Ethernet) interface of the ONU.
.1.3.6.1.4.1.11.2.14.11.15.2.42.5.1.1.1.2,HPN-ICF-EPON-UNI-MIB::hpnicfEponUniDescr,OCTET,read-only,,current,,A textual string containing information about the interface. This string should include the name of the manufacturer, the product name and the version of the interface hardware and software.
.1.3.6.1.4.1.11.2.14.11.15.2.42.5.1.1.1.3,HPN-ICF-EPON-UNI-MIB::hpnicfEponUniAdminStatus,INTEGER,read-write,,current,up(1):down(2):testing(3),The desired state of the user network interface. When a managed system initializes, all user network interfaces start with down(2) state. The testing(3)state indicates that no operational packets can be passed. As a result of either explicit management action or per configuration information retained by the managed system, hpnicfEponUniAdminStatus is then changed to either the up(1) or testing(3) states (or remains in the down(2) state).
.1.3.6.1.4.1.11.2.14.11.15.2.42.5.1.1.1.4,HPN-ICF-EPON-UNI-MIB::hpnicfEponUniMdi,INTEGER,read-write,,current,mdi-ii(1):mdi-x(2):mdi-auto(3),Type of the line connected to UNI interface: mdi-ii(straight-through cable), mdi-x (crossover cable), mdi-auto (auto-sensing).
.1.3.6.1.4.1.11.2.14.11.15.2.42.5.1.1.1.5,HPN-ICF-EPON-UNI-MIB::hpnicfEponUniPriority,Integer32,read-write,,current,,The priority of user network interface. If the value is larger, the priority will be higher.
.1.3.6.1.4.1.11.2.14.11.15.2.42.5.1.1.1.6,HPN-ICF-EPON-UNI-MIB::hpnicfEponUniVlanType,INTEGER,read-write,,current,vlantrunk(1):access(2):hybrid(3):untagged(4):transparent(5):doubletagged(6):tag(7):translation(8),UNI vlan types.
.1.3.6.1.4.1.11.2.14.11.15.2.42.5.1.1.1.7,HPN-ICF-EPON-UNI-MIB::hpnicfEponUniAccessVlan,Integer32,read-write,,current,,The vlan ID assigned to untagged frames or Priority-Tagged frames received on user network interface.
.1.3.6.1.4.1.11.2.14.11.15.2.42.5.1.1.1.8,HPN-ICF-EPON-UNI-MIB::hpnicfEponUniTrunkPvid,INTEGER,read-write,,current,,PVID(port vlan ID), the vlan ID assigned to untagged frames or Priority-Tagged frames received on user network interface.
.1.3.6.1.4.1.11.2.14.11.15.2.42.5.1.1.1.9,HPN-ICF-EPON-UNI-MIB::hpnicfEponUniVLANTrunkAllowListLow,OCTET,read-write,,current,,Each octet within this value specifies a set of eight vlans, with the first octet specifying vlans 1 through 8, the second octet specifying vlans 9 through 16, etc. Within each octet, the most significant bit represents the highest numbered VLAN, and the least significant bit represents the lowest numbered VLAN. Thus, each allowed vlan of the trunk port is represented by a single bit within the value of this object. If that bit has a value of '1' then that vlan is allowed in the set of vlans. the vlan is not allowed if its bit has a value of '0'.
.1.3.6.1.4.1.11.2.14.11.15.2.42.5.1.1.1.10,HPN-ICF-EPON-UNI-MIB::hpnicfEponUniVLANTrunkAllowListHigh,OCTET,read-write,,current,,Each octet within this value specifies a set of eight vlans, with the first octet specifying vlans 2049 through 2056, the second octet specifying vlans 2057 through 2064, etc. Within each octet, the most significant bit represents the highest numbered vlan, and the least significant bit represents the lowest numbered vlan. Thus, each allowed vlan of the trunk port is represented by a single bit within the value of this object. If that bit has a value of '1' then that vlan is allowed in the set of vlans; the vlan is not allowed if its bit has a value of '0'. 
.1.3.6.1.4.1.11.2.14.11.15.2.42.5.1.1.1.11,HPN-ICF-EPON-UNI-MIB::hpnicfEponUniInboundLineRate,Integer32,read-write,,current,,The value of the inbound line-rate. measured with kbps. The upper limit of the line-rate is the value of hpnicfEponUniLineRateMax in the entry. It must be multiple of the value of hpnicfEponUniLineRateStep. The default value of hpnicfEponUniLineRate is the value of hpnicfEponUniLineRateMax.
.1.3.6.1.4.1.11.2.14.11.15.2.42.5.1.1.1.12,HPN-ICF-EPON-UNI-MIB::hpnicfEponUniOutboundLineRate,Integer32,read-write,,current,,The value of the outbound line-rate. measured with kbps. The upper limit of the line-rate is the value of hpnicfEponUniLineRateMax in the entry. It must be multiple of the value of hpnicfEponUniLineRateStep. The default value of hpnicfEponUniLineRate is the value of hpnicfEponUniLineRateMax.
.1.3.6.1.4.1.11.2.14.11.15.2.42.5.1.1.1.13,HPN-ICF-EPON-UNI-MIB::hpnicfEponUniFlowControl,INTEGER,read-write,,current,true(1):false(2),Flow control status. true(1) - Flow control status enable. false(2) - Flow control status disable.
.1.3.6.1.4.1.11.2.14.11.15.2.42.5.1.1.1.14,HPN-ICF-EPON-UNI-MIB::hpnicfEponUniSpeed,INTEGER,read-write,,current,auto(0):s10M(10):s100M(100):s1000M(1000):s10000M(10000):s24000M(24000),User network interface speed.
.1.3.6.1.4.1.11.2.14.11.15.2.42.5.1.1.1.15,HPN-ICF-EPON-UNI-MIB::hpnicfEponUniDuplex,INTEGER,read-write,,current,full(1):half(2):auto(3),User network interface mode.
.1.3.6.1.4.1.11.2.14.11.15.2.42.5.1.1.1.16,HPN-ICF-EPON-UNI-MIB::hpnicfEponUniVlanVPNStatus,INTEGER,read-write,,current,true(1):false(2),vlan VPN status. true(1) - vlan VPN status enable. false(2) - vlan VPN disable.
.1.3.6.1.4.1.11.2.14.11.15.2.42.5.1.1.1.17,HPN-ICF-EPON-UNI-MIB::hpnicfEponUniCountReset,INTEGER,read-write,,current,reset(1),Reset the counter which is about packets of the interface, then the counter will change to zero. There is no sense in reading this object.
.1.3.6.1.4.1.11.2.14.11.15.2.42.5.1.1.1.18,HPN-ICF-EPON-UNI-MIB::hpnicfEponUniPortIsolate,INTEGER,read-write,,current,enable(1):disable(2), enable - enable UNI port isolate setting. disable - disable UNI port isolate setting. 
.1.3.6.1.4.1.11.2.14.11.15.2.42.5.1.1.1.23,HPN-ICF-EPON-UNI-MIB::hpnicfEponUniVlanConfiguration,OCTET,read-write,,current,, The vlan configuration of the related vlan mode. Transparent vlan mode: hpnicfEponUniVlanConfiguration is a zero length string. Tag vlan mode: the first four octets were the tag assigned to untagged frames received on UNI, including TPID, VID,CFI and priority. Translation vlan mode: the first four octets were the old tag (including TPID, VID, CFI and priority), which is replaced by the new tag(including TPID, VID, CFI and priority), the second four octets. 
.1.3.6.1.4.1.11.2.14.11.15.2.42.5.1.1.1.25,HPN-ICF-EPON-UNI-MIB::hpnicfEponUniAutoNegotiation,INTEGER,read-write,,current,enable(1):disable(2), enable - enable auto negotiation. disable - disable auto negotiation. 
.1.3.6.1.4.1.11.2.14.11.15.2.42.5.1.1.1.26,HPN-ICF-EPON-UNI-MIB::hpnicfEponUniRestartAutoNeg,INTEGER,read-write,,current,autoNegotiation(1), Force to restart the auto negotiation process. 
.1.3.6.1.4.1.11.2.14.11.15.2.42.5.1.1.1.29,HPN-ICF-EPON-UNI-MIB::hpnicfEponUniLinkStatus,INTEGER,read-only,,current,up(1):down(2), The link status of UNI. 
.1.3.6.1.4.1.11.2.14.11.15.2.42.5.1.1.1.30,HPN-ICF-EPON-UNI-MIB::hpnicfEponUniInterfaceType,INTEGER,read-only,,current,gigabitethernetport(1):fastethernetport(2):voipport(3):e1port(4), UNI interface type. 
.1.3.6.1.4.1.11.2.14.11.15.2.42.5.1.1.1.31,HPN-ICF-EPON-UNI-MIB::hpnicfEponUniVitualCableTest,INTEGER,read-write,,current,true(1):false(2), True(1): Virtual cable test enable. False(2): Virtual cable test disable.
.1.3.6.1.4.1.11.2.14.11.15.2.42.5.1.1.1.32,HPN-ICF-EPON-UNI-MIB::hpnicfEponUniVCTCableStatus,INTEGER,read-only,,current,normal(1):abnormal(2):abnormalOpen(3):abnormalShort(4):failure(5), Get the cable status. Normal(1),cable is normal. Abnormal(2),cable is abnormal. AbnormalOpen(3),cable is abnormal because of open circuit. AbnormalShort(4),cable is abnormal because of short circuit. Failure(5),cable is abnormal because of testing failure. 
.1.3.6.1.4.1.11.2.14.11.15.2.42.5.1.1.1.33,HPN-ICF-EPON-UNI-MIB::hpnicfEponUniVCTCableLength,Integer32,read-only,,current,, Get the cable length. When hpnicfEponUniVCTCableStatus is normal, the node stands for the length from the UNI port to the port opposite. When hpnicfEponUniVCTCableStatus is abnormal, it stands for the lengh from the UNI port to the failure place. Unit:meter(m). 
.1.3.6.1.4.1.11.2.14.11.15.2.42.5.1.1.1.34,HPN-ICF-EPON-UNI-MIB::hpnicfEponUniVCTImpedanceMismatch,INTEGER,read-only,,current,not-support(1):true(2):false(3), Get the cable impedance. Not-support(1),the UNI port does not support this function. True(2),impedance match. False(3),impedance mismatch.
.1.3.6.1.4.1.11.2.14.11.15.2.42.5.1.1.1.35,HPN-ICF-EPON-UNI-MIB::hpnicfEponUniVCTPairSkew,Integer32,read-only,,current,, Get the symmetry of cable. If the function is not supported, the default value 0 will be returned. Unit:nanosecond(ns). 
.1.3.6.1.4.1.11.2.14.11.15.2.42.5.1.1.1.36,HPN-ICF-EPON-UNI-MIB::hpnicfEponUniVCTPairSwap,INTEGER,read-only,,current,notSupport(1):true(2):false(3), NotSupport(1),the UNI port does not support this function. True(2),pair swap. False(3),not pair swap.
.1.3.6.1.4.1.11.2.14.11.15.2.42.5.1.1.1.37,HPN-ICF-EPON-UNI-MIB::hpnicfEponUniVCTPolaritySwap,INTEGER,read-only,,current,notSupport(1):true(2):false(3), NotSupport(1),the UNI port does not support this function. True(2),polarity swap. False(3),not polarity swap.
.1.3.6.1.4.1.11.2.14.11.15.2.42.5.1.1.1.38,HPN-ICF-EPON-UNI-MIB::hpnicfEponUniVCTInsertionLoss,Integer32,read-only,,current,, If the function is not supported, the default value 0 will be returned. Unit:decibel(db). 
.1.3.6.1.4.1.11.2.14.11.15.2.42.5.1.1.1.39,HPN-ICF-EPON-UNI-MIB::hpnicfEponUniVCTReturnLoss,Integer32,read-only,,current,, If the function is not supported, the default value 0 will be returned. Unit:decibel(db). 
.1.3.6.1.4.1.11.2.14.11.15.2.42.5.1.1.1.40,HPN-ICF-EPON-UNI-MIB::hpnicfEponUniVCTNearendCrosstalk,Integer32,read-only,,current,, If the function is not supported, the default value 0 will be returned. Unit:decibel(db). 
.1.3.6.1.4.1.11.2.14.11.15.2.42.5.1.1.1.41,HPN-ICF-EPON-UNI-MIB::hpnicfEponUniVlan,Integer32,accessible-for-notify,,current,, If the function is not supported, the default value 0 will be returned. Unit:decibel(db). 
.1.3.6.1.4.1.11.2.14.11.15.2.42.5.1.2,HPN-ICF-EPON-UNI-MIB::hpnicfEponUniCountTable,,not-accessible,,current,,A list of interface counter about frames entries.
.1.3.6.1.4.1.11.2.14.11.15.2.42.5.1.2.1,HPN-ICF-EPON-UNI-MIB::hpnicfEponUniCountEntry,,not-accessible,ifIndex:hpnicfEponUniIndex,current,,An entry containing management information applicable to a particular interface.
.1.3.6.1.4.1.11.2.14.11.15.2.42.5.1.2.1.1,HPN-ICF-EPON-UNI-MIB::hpnicfEponUniInStatsPkts,Unsigned32,read-only,,current,,The total number of frames (including bad frames, broadcast frames, and multicast frames) received.
.1.3.6.1.4.1.11.2.14.11.15.2.42.5.1.2.1.2,HPN-ICF-EPON-UNI-MIB::hpnicfEponUniInStatsUnicastPkts,Unsigned32,read-only,,current,,The total number of good frames received that are directed to the unicast address. Note that this does not include multicast and broadcast frames.
.1.3.6.1.4.1.11.2.14.11.15.2.42.5.1.2.1.3,HPN-ICF-EPON-UNI-MIB::hpnicfEponUniInStatsBroadcastPkts,Unsigned32,read-only,,current,,The total number of good frames received that are directed to the broadcast address. Note that this does not include multicast frames.
.1.3.6.1.4.1.11.2.14.11.15.2.42.5.1.2.1.4,HPN-ICF-EPON-UNI-MIB::hpnicfEponUniInStatsMulticastPkts,Unsigned32,read-only,,current,,The total number of good frames received that are directed to a multicast address. Note that this number does not include frames directed to the broadcast address.
.1.3.6.1.4.1.11.2.14.11.15.2.42.5.1.2.1.5,HPN-ICF-EPON-UNI-MIB::hpnicfEponUniInPausePkts,Unsigned32,read-only,,current,,A count of MAC Control frames received on this interface by the pause(flow control) operation. This counter does not increment when the interface is in a half-duplex mode. Discontinuities in the value of this counter can occur at re-initialization of the management system.
.1.3.6.1.4.1.11.2.14.11.15.2.42.5.1.2.1.6,HPN-ICF-EPON-UNI-MIB::hpnicfEponUniInTotalErrors,Unsigned32,read-only,,current,,Total count of the error frames received on this interface.
.1.3.6.1.4.1.11.2.14.11.15.2.42.5.1.2.1.7,HPN-ICF-EPON-UNI-MIB::hpnicfEponUniInStatsCRCAlignErrors,Unsigned32,read-only,,current,,The total number of frames received that had a length (excluding framing bits, but including FCS octets) of between 64 and 1518 octets, inclusive, but had either a bad Frame Check Sequence (FCS) with an integral number of octets (FCS Error) or a bad FCS with a non-integral number of octets (Alignment Error).
.1.3.6.1.4.1.11.2.14.11.15.2.42.5.1.2.1.8,HPN-ICF-EPON-UNI-MIB::hpnicfEponUniInStatsUndersizePkts,Unsigned32,read-only,,current,,The total number of frames received that are less than 64 octets long (excluding framing bits, but including FCS octets) and are otherwise well formed.
.1.3.6.1.4.1.11.2.14.11.15.2.42.5.1.2.1.9,HPN-ICF-EPON-UNI-MIB::hpnicfEponUniInStatsOversizePkts,Unsigned32,read-only,,current,,The total number of frames received that are longer than 1518 octets (excluding framing bits, but including FCS octets) and are otherwise well formed.
.1.3.6.1.4.1.11.2.14.11.15.2.42.5.1.2.1.10,HPN-ICF-EPON-UNI-MIB::hpnicfEponUniInErrorbyOther,Unsigned32,read-only,,current,,The total number of error frames received on this interface.
.1.3.6.1.4.1.11.2.14.11.15.2.42.5.1.2.1.11,HPN-ICF-EPON-UNI-MIB::hpnicfEponUniOutStatsPkts,Unsigned32,read-only,,current,,The total number of frames (including bad frames, broadcast frames, and multicast frames) sent.
.1.3.6.1.4.1.11.2.14.11.15.2.42.5.1.2.1.12,HPN-ICF-EPON-UNI-MIB::hpnicfEponUniOutStatsUnicastPkts,Unsigned32,read-only,,current,,The total number of good frames sent that are directed to the unicast address. Note that this does not include multicast and broadcast frames.
.1.3.6.1.4.1.11.2.14.11.15.2.42.5.1.2.1.13,HPN-ICF-EPON-UNI-MIB::hpnicfEponUniOutStatsBroadcastPkts,Unsigned32,read-only,,current,,The total number of good frames sent that are directed to the broadcast address. Note that this does not include multicast frames.
.1.3.6.1.4.1.11.2.14.11.15.2.42.5.1.2.1.14,HPN-ICF-EPON-UNI-MIB::hpnicfEponUniOutStatsMulticastPkts,Unsigned32,read-only,,current,,The total number of good frames sent that are directed to a multicast address. Note that this number does not include frames directed to the broadcast address.
.1.3.6.1.4.1.11.2.14.11.15.2.42.5.1.2.1.15,HPN-ICF-EPON-UNI-MIB::hpnicfEponUniOutStatsPausePkts,Unsigned32,read-only,,current,,The total number of MAC control frames sent on this interface by the pause operation. This counter does not increment when the interface is in a half-duplex mode. Discontinuities in the value of this counter can occur at re-initialization of the management system.
.1.3.6.1.4.1.11.2.14.11.15.2.42.5.1.2.1.16,HPN-ICF-EPON-UNI-MIB::hpnicfEponUniOutTotalErrors,Unsigned32,read-only,,current,,The total number of error frames sent on this interface.
.1.3.6.1.4.1.11.2.14.11.15.2.42.5.1.2.1.17,HPN-ICF-EPON-UNI-MIB::hpnicfEponUniOutStatsCollisions,Unsigned32,read-only,,current,,The best estimate of the total number of collisions on this Ethernet segment. The value returned will depend on the location of the RMON probe. Section 8.2.1.3 (10BASE-5) and section 10.3.1.3 (10BASE-2) of IEEE standard 802.3 states that a station must detect a collision, in the receive mode, if three or more stations are transmitting simultaneously. A repeater port must detect a collision when two or more stations are transmitting simultaneously. Thus a probe placed on a repeater port could record more collisions than a probe connected to a station on the same segment could. Probe location plays a much smaller role when considering 10BASE-T. 14.2.1.4 (10BASE-T) of IEEE standard 802.3 defines a collision as the simultaneous presence of signals on the DO and RD circuits (transmitting and receiving at the same time). A 10BASE-T station can only detect collisions when it is transmitting. Thus probes placed on a station and a repeater, should report the same number of collisions. Note also that an RMON probe inside a repeater should ideally report collisions between the repeater and one or more other hosts (transmit collisions as defined by IEEE 802.3k) plus receiver collisions observed on any coax segments to which the repeater is connected.
.1.3.6.1.4.1.11.2.14.11.15.2.42.5.1.2.1.18,HPN-ICF-EPON-UNI-MIB::hpnicfEponUniOutDelayExceededDiscards,Unsigned32,read-only,,current,,The number of frames discarded by this port due to excessive transit delay through the bridge. It is incremented by both transparent and source route bridges.
.1.3.6.1.4.1.11.2.14.11.15.2.42.5.1.2.1.19,HPN-ICF-EPON-UNI-MIB::hpnicfEponUniOutErrorbyOther,Unsigned32,read-only,,current,,The total number of other error frames sent on this interface. Other error frames means the error frames out of collision frames and excessive delayed frames.
.1.3.6.1.4.1.11.2.14.11.15.2.42.5.1.2.1.20,HPN-ICF-EPON-UNI-MIB::hpnicfEponUniOutDroppedFrames,Unsigned32,read-only,,current,, The total number of frames dropped because of buffer failure. 
.1.3.6.1.4.1.11.2.14.11.15.2.42.5.1.3,HPN-ICF-EPON-UNI-MIB::hpnicfEponUniIgmpInfoTable,,not-accessible,,current,,This table stores igmp information of UNI interface.
.1.3.6.1.4.1.11.2.14.11.15.2.42.5.1.3.1,HPN-ICF-EPON-UNI-MIB::hpnicfEponUniIgmpInfoEntry,,not-accessible,ifIndex:hpnicfEponUniIndex:hpnicfEponUniMacIndex,current,,The entry of hpnicfEponUniIgmpInfoTable.
.1.3.6.1.4.1.11.2.14.11.15.2.42.5.1.3.1.1,HPN-ICF-EPON-UNI-MIB::hpnicfEponUniMacIndex,Integer32,not-accessible,,current,,The index uniquely identifies the igmp information in current UNI interface.
.1.3.6.1.4.1.11.2.14.11.15.2.42.5.1.3.1.2,HPN-ICF-EPON-UNI-MIB::hpnicfEponUniIgmpMacAddress,OCTET,read-only,,current,,A 6-octet read-only value carrying the individual MAC address indicates which igmp group the UNI interface belonging to.
.1.3.6.1.4.1.11.2.14.11.15.2.42.5.1.3.1.3,HPN-ICF-EPON-UNI-MIB::hpnicfEponUniIgmpVlanId,Integer32,read-only,,current,,An integer range from 1 to 4094 indicates the vlan which the igmp Mac address has joined in.
.1.3.6.1.4.1.11.2.14.11.15.2.42.5.1.4,HPN-ICF-EPON-UNI-MIB::hpnicfEponUniParaMan,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.2.42.5.1.4.1,HPN-ICF-EPON-UNI-MIB::hpnicfEponUniLineRateMax,Integer32,read-only,,current,,The maximum value of the line-rate(kbps) that user network interface can be set.
.1.3.6.1.4.1.11.2.14.11.15.2.42.5.1.4.2,HPN-ICF-EPON-UNI-MIB::hpnicfEponUniLineRateStep,Integer32,read-only,,current,,The step of line-rate(kbps).
.1.3.6.1.4.1.11.2.14.11.15.2.42.5.1.4.3,HPN-ICF-EPON-UNI-MIB::hpnicfEponUniNumberOnOnu,Integer32,read-only,,current,,The user network interface number on ONU.
.1.3.6.1.4.1.11.2.14.11.15.2.42.5.1.5,HPN-ICF-EPON-UNI-MIB::hpnicfEponUniScalarGroup,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.2.42.5.1.6,HPN-ICF-EPON-UNI-MIB::hpnicfEponUniPortPolicyTable,,not-accessible,,current,, UNI port policy configuration. 
.1.3.6.1.4.1.11.2.14.11.15.2.42.5.1.6.1,HPN-ICF-EPON-UNI-MIB::hpnicfEponUniPortPolicyEntry,,not-accessible,ifIndex:hpnicfEponUniIndex,current,, The entry of hpnicfEponUniPortPolicyTable. 
.1.3.6.1.4.1.11.2.14.11.15.2.42.5.1.6.1.1,HPN-ICF-EPON-UNI-MIB::hpnicfEponUniPortPolicyStatus,INTEGER,read-write,,current,enable(1):disable(2), enable - enable UNI upstream port policing. disable - disable UNI upstream port policing. 
.1.3.6.1.4.1.11.2.14.11.15.2.42.5.1.6.1.2,HPN-ICF-EPON-UNI-MIB::hpnicfEponUniPortPolicyCir,Integer32,read-write,,current,, The committed information rate, ranging from 1 to 102400, measured in kbps. 
.1.3.6.1.4.1.11.2.14.11.15.2.42.5.1.6.1.3,HPN-ICF-EPON-UNI-MIB::hpnicfEponUniPortPolicyBucketDepth,Integer32,read-write,,current,, The depth of the token bucket to tolerant the certain burst(CBS), ranging from 0 to 65535, measured in bytes. 
.1.3.6.1.4.1.11.2.14.11.15.2.42.5.1.6.1.4,HPN-ICF-EPON-UNI-MIB::hpnicfEponUniPortPolicyExtraBurst,Integer32,read-write,,current,, The extra token to permit the forwarding engine to finish the packet being sent when the bucket depth is exhausted, ranging from 0 to 65535, measured in bytes. 
.1.3.6.1.4.1.11.2.14.11.15.2.42.5.1.6.1.5,HPN-ICF-EPON-UNI-MIB::hpnicfEponUniPortPolicyInboundCir,Integer32,read-write,,current,, The inbound committed information rate, measured in kbps. 
.1.3.6.1.4.1.11.2.14.11.15.2.42.5.1.6.1.6,HPN-ICF-EPON-UNI-MIB::hpnicfEponUniPortPolicyInboundBucketDepth,Integer32,read-write,,current,, The inbound depth of the token bucket to tolerant the certain burst(CBS), ranging from 0 to 65535, measured in bytes. 
.1.3.6.1.4.1.11.2.14.11.15.2.42.5.1.6.1.7,HPN-ICF-EPON-UNI-MIB::hpnicfEponUniPortPolicyInboundExtraBurst,Integer32,read-write,,current,, The inbound extra token to permit the forwarding engine to finish the packet being sent when the bucket depth is exhausted, ranging from 0 to 65535, measured in bytes. 
.1.3.6.1.4.1.11.2.14.11.15.2.42.5.1.6.1.8,HPN-ICF-EPON-UNI-MIB::hpnicfEponUniPortPolicyOutboundCir,Integer32,read-write,,current,, The outbound committed information rate, stepped by 64, measured in kbps. 
.1.3.6.1.4.1.11.2.14.11.15.2.42.5.1.6.1.9,HPN-ICF-EPON-UNI-MIB::hpnicfEponUniPortPolicyOutboundPir,Integer32,read-write,,current,, The outbound peak information rate, stepped by 64, measured in kbps. 
.1.3.6.1.4.1.11.2.14.11.15.2.42.5.1.7,HPN-ICF-EPON-UNI-MIB::hpnicfEponUniMulticastTable,,not-accessible,,current,, UNI multicast configuration. 
.1.3.6.1.4.1.11.2.14.11.15.2.42.5.1.7.1,HPN-ICF-EPON-UNI-MIB::hpnicfEponUniMulticastEntry,,not-accessible,ifIndex:hpnicfEponUniIndex,current,, The entry of hpnicfEponUniPortPolicyTable. 
.1.3.6.1.4.1.11.2.14.11.15.2.42.5.1.7.1.1,HPN-ICF-EPON-UNI-MIB::hpnicfEponUniMulticastGroupNumber,Integer32,read-write,,current,, The allowed multicast group number that can be handled at the same time by UNI. 
.1.3.6.1.4.1.11.2.14.11.15.2.42.5.1.7.1.2,HPN-ICF-EPON-UNI-MIB::hpnicfEponUniMulticastVlanList,OCTET,read-write,,current,, The multicast vlan list. The first two octets of the string represent the first VLAN ID; the second two octets of the string represent the second VLAN ID, and so on. It is a zero length string by default. 
.1.3.6.1.4.1.11.2.14.11.15.2.42.5.1.7.1.3,HPN-ICF-EPON-UNI-MIB::hpnicfEponUniMulticastStripStatus,INTEGER,read-write,,current,enable(1):disable(2), true - strip the vlan tag of multicast packet. false - does not strip the vlan tag of multicast packet. 
.1.3.6.1.4.1.11.2.14.11.15.2.42.5.1.7.1.4,HPN-ICF-EPON-UNI-MIB::hpnicfEponUniMulticastFastleave,INTEGER,read-write,,current,true(1):false(2), true(1) - fast leave of IGMP enable on ONU. false(2) - fast leave of IGMP disable on ONU. 
.1.3.6.1.4.1.11.2.14.11.15.2.42.5.1.8,HPN-ICF-EPON-UNI-MIB::hpnicfEponUniTechAbilityTable,,not-accessible,,current,, UNI multicast configuration. 
.1.3.6.1.4.1.11.2.14.11.15.2.42.5.1.8.1,HPN-ICF-EPON-UNI-MIB::hpnicfEponUniTechAbilityEntry,,not-accessible,ifIndex:hpnicfEponUniIndex,current,, The entry of hpnicfEponUniTechAbilityTable. 
.1.3.6.1.4.1.11.2.14.11.15.2.42.5.1.8.1.1,HPN-ICF-EPON-UNI-MIB::hpnicfEponUniLocalTechAbility,OCTET,read-only,,current,, The local port capabilities of the UNI. Each two octets stand for a capability of UNI: the first two octets represent one capability and the second two octets represent another capability, and so on. The capabilities list: 1 - undefined, 2 - initializing, true ability not yet known, 14 - 10BASE-T, 142 - full duplex 10BASE-T, 23 - 100BASE-T4, 25 - 100BASE-TX, 252 - full duplex 100BASE-TX, 312 - PAUSE operation for full duplex links, 313 - asymmetric PAUSE operation for full duplex links, 314 - symmetric PAUSE operation for full duplex links, 32 - 100BASE-T2, 322 - full duplex 100BASE-T2, 36 - 1000BASE-X, 362 - full duplex 1000BASE-X, 40 - 1000BASE-T UTP PHY, 402 - full duplex 1000BASE-T UTP PHY, 37 - remote fault bit 1(RF1), 372 - remote fault bit 2(RF2), 8029 - 802.9ISLAN-16T. 
.1.3.6.1.4.1.11.2.14.11.15.2.42.5.1.8.1.2,HPN-ICF-EPON-UNI-MIB::hpnicfEponUniAdvertisedTechAbility,OCTET,read-only,,current,, The advertised port capabilities of the UNI. The capabilities list references the description of hpnicfEponUniLocalTechAbility. 
.1.3.6.1.4.1.11.2.14.11.15.2.42.5.1.9,HPN-ICF-EPON-UNI-MIB::hpnicfEponUniMulticastControlTable,,not-accessible,,current,, UNI multicast control parameters. 
.1.3.6.1.4.1.11.2.14.11.15.2.42.5.1.9.1,HPN-ICF-EPON-UNI-MIB::hpnicfEponUniMulticastControlEntry,,not-accessible,ifIndex:hpnicfEponUniIndex:hpnicfEponUniMulticastIndex,current,, The entry of the table hpnicfEponUniMulticastControlTable. 
.1.3.6.1.4.1.11.2.14.11.15.2.42.5.1.9.1.1,HPN-ICF-EPON-UNI-MIB::hpnicfEponUniMulticastVlanIndex,Integer32,read-create,,current,, The multicast vlan ID. 
.1.3.6.1.4.1.11.2.14.11.15.2.42.5.1.9.1.2,HPN-ICF-EPON-UNI-MIB::hpnicfEponUniMulticastAddressList,OCTET,read-create,,current,, The multicast address, each four octets represents a multicast address, the address section ranging from the first four octets to the second four octets, and the like. 
.1.3.6.1.4.1.11.2.14.11.15.2.42.5.1.9.1.3,HPN-ICF-EPON-UNI-MIB::hpnicfEponUniMulticastAccessRule,INTEGER,read-create,,current,deny(1):permit(2):preview(3), deny - deny the multicast packet. permit - permit the multicast packet. preview - permit the multicast packet with conditions. 
.1.3.6.1.4.1.11.2.14.11.15.2.42.5.1.9.1.4,HPN-ICF-EPON-UNI-MIB::hpnicfEponUniMulticastChannelLimit,Integer32,read-create,,current,, The limitation of multicast preview channel number. 
.1.3.6.1.4.1.11.2.14.11.15.2.42.5.1.9.1.5,HPN-ICF-EPON-UNI-MIB::hpnicfEponUniMulticastPreTimeSlice,Integer32,read-create,,current,, The time slice of multicast preview. 
.1.3.6.1.4.1.11.2.14.11.15.2.42.5.1.9.1.6,HPN-ICF-EPON-UNI-MIB::hpnicfEponUniMulticastPreTimes,Integer32,read-create,,current,, The number of multicast preview times. 
.1.3.6.1.4.1.11.2.14.11.15.2.42.5.1.9.1.7,HPN-ICF-EPON-UNI-MIB::hpnicfEponUniMulticastPreInterval,Integer32,read-create,,current,, The interval between two consecutive previews, measured in minute. 
.1.3.6.1.4.1.11.2.14.11.15.2.42.5.1.9.1.8,HPN-ICF-EPON-UNI-MIB::hpnicfEponUniMulticastRowStatus,INTEGER,read-create,,current,active(1):notInService(2):notReady(3):createAndGo(4):createAndWait(5):destroy(6), The status of this table entry. The active, createAndGo and the destory statuses are supported. 
.1.3.6.1.4.1.11.2.14.11.15.2.42.5.1.9.1.9,HPN-ICF-EPON-UNI-MIB::hpnicfEponUniMulticastIndex,INTEGER,not-accessible,,current,, The index of the entry. 
.1.3.6.1.4.1.11.2.14.11.15.2.42.5.1.9.1.10,HPN-ICF-EPON-UNI-MIB::hpnicfEponUniMulticastSourceIpList,OCTET,read-create,,current,, This list contains many source ip addresses. Each ip address is contained in four octets. 
.1.3.6.1.4.1.11.2.14.11.15.2.42.5.1.9.1.11,HPN-ICF-EPON-UNI-MIB::hpnicfEponUniMulticastResetInterval,Integer32,read-create,,current,, The interval is measured in minute. From the last preview limitation is reached, a customer can preview again after this interval is expired. 
.1.3.6.1.4.1.11.2.14.11.15.2.42.5.1.10,HPN-ICF-EPON-UNI-MIB::hpnicfEponUniQosIndexNextTable,,not-accessible,,current,, The next index table. 
.1.3.6.1.4.1.11.2.14.11.15.2.42.5.1.10.1,HPN-ICF-EPON-UNI-MIB::hpnicfEponUniQosIndexNextEntry,,not-accessible,ifIndex:hpnicfEponUniIndex,current,, The entry of the table hpnicfEponUniQosIndexNextTable. 
.1.3.6.1.4.1.11.2.14.11.15.2.42.5.1.10.1.1,HPN-ICF-EPON-UNI-MIB::hpnicfEponUniQosConfIndexNext,Integer32,read-only,,current,, This object contains an appropriate value to be used for hpnicfEponUniQosConfIndex when creating rows in the hpnicfEponUniQosConfTable. 
.1.3.6.1.4.1.11.2.14.11.15.2.42.5.1.11,HPN-ICF-EPON-UNI-MIB::hpnicfEponUniQosConfTable,,not-accessible,,current,, UNI Qos configuration. 
.1.3.6.1.4.1.11.2.14.11.15.2.42.5.1.11.1,HPN-ICF-EPON-UNI-MIB::hpnicfEponUniQosConfEntry,,not-accessible,ifIndex:hpnicfEponUniIndex:hpnicfEponUniQosConfIndex,current,, The entry of the table hpnicfEponUniQosConfTable. 
.1.3.6.1.4.1.11.2.14.11.15.2.42.5.1.11.1.1,HPN-ICF-EPON-UNI-MIB::hpnicfEponUniQosConfIndex,Integer32,not-accessible,,current,, The rule index. 
.1.3.6.1.4.1.11.2.14.11.15.2.42.5.1.11.1.2,HPN-ICF-EPON-UNI-MIB::hpnicfEponUniQosConfRuleIndexNext,Integer32,read-only,,current,, This object contains an appropriate value to be used for hpnicfEponUniQosRuleIndex when creating rows in the hpnicfEponUniQosRuleTable. 
.1.3.6.1.4.1.11.2.14.11.15.2.42.5.1.11.1.3,HPN-ICF-EPON-UNI-MIB::hpnicfEponUniQosConfMappedQueue,Integer32,read-create,,current,, The queue that the ethernet frames will be mapped. 
.1.3.6.1.4.1.11.2.14.11.15.2.42.5.1.11.1.4,HPN-ICF-EPON-UNI-MIB::hpnicfEponUniQosConfMarkedPriority,Integer32,read-create,,current,, Priority of the ethernet frames to be marked, which compliant with the 802.1D user priority standard. 
.1.3.6.1.4.1.11.2.14.11.15.2.42.5.1.11.1.5,HPN-ICF-EPON-UNI-MIB::hpnicfEponUniQosConfRowStatus,INTEGER,read-create,,current,active(1):notInService(2):notReady(3):createAndGo(4):createAndWait(5):destroy(6), The status of this table entry. The active, createAndGo and the destory statuses are supported. 
.1.3.6.1.4.1.11.2.14.11.15.2.42.5.1.12,HPN-ICF-EPON-UNI-MIB::hpnicfEponUniQosRuleTable,,not-accessible,,current,, Qos sub rule of the UNI. 
.1.3.6.1.4.1.11.2.14.11.15.2.42.5.1.12.1,HPN-ICF-EPON-UNI-MIB::hpnicfEponUniQosRuleEntry,,not-accessible,ifIndex:hpnicfEponUniIndex:hpnicfEponUniQosConfIndex:hpnicfEponUniQosRuleIndex,current,, The entry of the table hpnicfEponUniQosRuleTable. 
.1.3.6.1.4.1.11.2.14.11.15.2.42.5.1.12.1.1,HPN-ICF-EPON-UNI-MIB::hpnicfEponUniQosRuleIndex,Integer32,not-accessible,,current,, The sub rule index. 
.1.3.6.1.4.1.11.2.14.11.15.2.42.5.1.12.1.2,HPN-ICF-EPON-UNI-MIB::hpnicfEponUniQosRuleSelector,INTEGER,read-create,,current,dstmac(1):srcmac(2):ethernetpriority(3):vlanid(4):ethernettype(5):dstip(6):srcip(7):ipprototype(8):ipv4tosdscp(9):ipv6precedence(10):srcport(11):dstport(12), The ethernet frame selector. dstmac - based on destination MAC address. srcmac - based on source MAC address. ethernetpriority - based on ethernet priority. vlanid - based on VLAN ID. ethernettype - based on ethernet type. dstip - based on destination IP address. srcip - based on source IP address. ipprototype - based on IP type(ipv4 or ipv6). ipv4tosdscp - based on IP TOS/DSCP. ipv6 - based IP precedence. srcport - based on layer 4 source port. dstport - based on layer 4 destination port. 
.1.3.6.1.4.1.11.2.14.11.15.2.42.5.1.12.1.3,HPN-ICF-EPON-UNI-MIB::hpnicfEponUniQosRuleValue,Integer32,read-create,,current,, The rule value based on the hpnicfEponUniQosRuleSelector. 
.1.3.6.1.4.1.11.2.14.11.15.2.42.5.1.12.1.4,HPN-ICF-EPON-UNI-MIB::hpnicfEponUniQosRuleMacAddress,OCTET,read-create,,current,, MAC Address. 
.1.3.6.1.4.1.11.2.14.11.15.2.42.5.1.12.1.5,HPN-ICF-EPON-UNI-MIB::hpnicfEponUniQosRuleOperator,INTEGER,read-create,,current,nevermatch(1):equal(2):notequal(3):lessthanequal(4):greaterthanequal(5):fieldexist(6):fieldnotexist(7):alwaysmatch(8), nervermatch - value never match. equal - field equal to the value. notequal - field not equal to the value. lessthanequal - field less than or equal to the value. greaterthanequal - field greater than or equal to the value. fieldexist - value is ignored if field exists. fieldnotexist - value is ignored if field does not exist. alwaysmatch - value always match. 
.1.3.6.1.4.1.11.2.14.11.15.2.42.5.1.12.1.6,HPN-ICF-EPON-UNI-MIB::hpnicfEponUniQosRuleRowStatus,INTEGER,read-create,,current,active(1):notInService(2):notReady(3):createAndGo(4):createAndWait(5):destroy(6), The status of this table entry. Only active, createAndGo and the destory are supported. 
.1.3.6.1.4.1.11.2.14.11.15.2.42.5.1.13,HPN-ICF-EPON-UNI-MIB::hpnicfEponUniMirrorGroupTable,,not-accessible,,current,, Qos sub rule of the UNI. 
.1.3.6.1.4.1.11.2.14.11.15.2.42.5.1.13.1,HPN-ICF-EPON-UNI-MIB::hpnicfEponUniMirrorGroupEntry,,not-accessible,ifIndex:hpnicfEponUniMirrorGroupID,current,, The entry of the hpnicfEponUniMirrorGroupTable. 
.1.3.6.1.4.1.11.2.14.11.15.2.42.5.1.13.1.1,HPN-ICF-EPON-UNI-MIB::hpnicfEponUniMirrorGroupID,Integer32,not-accessible,,current,,Epon UNI mirror group ID.
.1.3.6.1.4.1.11.2.14.11.15.2.42.5.1.13.1.2,HPN-ICF-EPON-UNI-MIB::hpnicfEponUniMirrorInboundPortList,OCTET,read-write,,current,, UNI inbound port list. Each octet within this value specifies a set of eight ports, with the first octet specifying ports 1 through 8, the second octet specifying ports 9 through 16, etc. Within each octet, the most significant bit represents the highest numbered UNI, and the least significant bit represents the lowest numbered UNI. Thus, each UNI port is represented by a single bit within the value of this object. If that bit has a value of '1' then that port is allowed in the set of ports. the port is not allowed if its bit has a value of '0'. 
.1.3.6.1.4.1.11.2.14.11.15.2.42.5.1.13.1.3,HPN-ICF-EPON-UNI-MIB::hpnicfEponUniMirrorOutboundPortList,OCTET,read-create,,current,, UNI outnbound port list, more infomation reference hpnicfEponUniMirrorInboundPortList 
.1.3.6.1.4.1.11.2.14.11.15.2.42.5.1.13.1.4,HPN-ICF-EPON-UNI-MIB::hpnicfEponUniMonitorPort,Integer32,read-create,,current,, UNI monitor port. 
.1.3.6.1.4.1.11.2.14.11.15.2.42.5.1.13.1.5,HPN-ICF-EPON-UNI-MIB::hpnicfEponUniMirrorRowStatus,INTEGER,read-create,,current,active(1):notInService(2):notReady(3):createAndGo(4):createAndWait(5):destroy(6), RowStatus, Now support three status: createAndGo, active, destroy. 
.1.3.6.1.4.1.11.2.14.11.15.2.42.5.1.14,HPN-ICF-EPON-UNI-MIB::hpnicfEponUniMirrorGroupIdNextTable,,not-accessible,,current,, The next index table, which is used by hpnicfEponUniMirrorGroupTable. 
.1.3.6.1.4.1.11.2.14.11.15.2.42.5.1.14.1,HPN-ICF-EPON-UNI-MIB::hpnicfEponUniMirrorGroupIdNextEntry,,not-accessible,ifIndex,current,, The entry of the table hpnicfEponUniMirrorGroupIdNextEntry. 
.1.3.6.1.4.1.11.2.14.11.15.2.42.5.1.14.1.1,HPN-ICF-EPON-UNI-MIB::hpnicfEponUniMirrorGroupIDNext,Integer32,read-only,,current,, This object contains an appropriate value to be used for hpnicfEponUniMirrorGroupID when creating rows in the hpnicfEponUniMirrorGroupTable. 
.1.3.6.1.4.1.11.2.14.11.15.2.42.5.1.15,HPN-ICF-EPON-UNI-MIB::hpnicfEponUniMulticastCtrlInfoTable,,not-accessible,,current,, UNI multicast information which is active . 
.1.3.6.1.4.1.11.2.14.11.15.2.42.5.1.15.1,HPN-ICF-EPON-UNI-MIB::hpnicfEponUniMulticastCtrlInfoEntry,,not-accessible,ifIndex:hpnicfEponUniIndex:hpnicfEponUniMultActVlan:hpnicfEponUniMultActAddress,current,, The entry of the table hpnicfEponUniMulticastCtrlInfoTable. 
.1.3.6.1.4.1.11.2.14.11.15.2.42.5.1.15.1.1,HPN-ICF-EPON-UNI-MIB::hpnicfEponUniMultActVlan,Integer32,not-accessible,,current,, The multicast vlan ID which is active. 
.1.3.6.1.4.1.11.2.14.11.15.2.42.5.1.15.1.2,HPN-ICF-EPON-UNI-MIB::hpnicfEponUniMultActAddress,IpAddress,not-accessible,,current,, The multicast address which is active. 
.1.3.6.1.4.1.11.2.14.11.15.2.42.5.1.15.1.3,HPN-ICF-EPON-UNI-MIB::hpnicfEponUniMultActAccessRule,INTEGER,read-only,,current,deny(1):permit(2):preview(3), deny - deny the multicast packet. permit - permit the multicast packet. preview - permit the multicast packet with conditions. 
.1.3.6.1.4.1.11.2.14.11.15.2.42.5.1.15.1.4,HPN-ICF-EPON-UNI-MIB::hpnicfEponUniMultActPreTimes,Integer32,read-only,,current,, The number of multicast preview times which is active. 
.1.3.6.1.4.1.11.2.14.11.15.2.42.5.1.15.1.5,HPN-ICF-EPON-UNI-MIB::hpnicfEponUniMultActPreRemain,Integer32,read-only,,current,, The remanent time slice of multicast preview which is active. 
.1.3.6.1.4.1.11.2.14.11.15.2.42.5.1.16,HPN-ICF-EPON-UNI-MIB::hpnicfEponUniMulticastIndexNextTable,,not-accessible,,current,, The next index table, which is used by hpnicfEponUniMulticastControlTable. 
.1.3.6.1.4.1.11.2.14.11.15.2.42.5.1.16.1,HPN-ICF-EPON-UNI-MIB::hpnicfEponUniMulticastIndexNextEntry,,not-accessible,ifIndex:hpnicfEponUniIndex,current,, The entry of the table hpnicfEponUniMulticastIndexNextEntry. 
.1.3.6.1.4.1.11.2.14.11.15.2.42.5.1.16.1.1,HPN-ICF-EPON-UNI-MIB::hpnicfEponUniMulticastConfIndexNext,Integer32,read-only,,current,, This object contains an appropriate value to be used for hpnicfEponUniMulticastIndex when creating rows in the hpnicfEponUniMulticastControlTable. 
.1.3.6.1.4.1.11.2.14.11.15.2.42.5.2,HPN-ICF-EPON-UNI-MIB::hpnicfEponUniTrap,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.2.42.5.2.0,HPN-ICF-EPON-UNI-MIB::hpnicfEponUniTrapPrefix,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.2.42.5.2.0.1,HPN-ICF-EPON-UNI-MIB::hpnicfEponUniLinkUpTrap,,,,,, A hpnicfEponUniLinkUpTrap notification is sent when the UNI up event is detected and the transmitting switch is turned on. 
.1.3.6.1.4.1.11.2.14.11.15.2.42.5.2.0.2,HPN-ICF-EPON-UNI-MIB::hpnicfEponUniLinkDownTrap,,,,,, A hpnicfEponUniLinkDownTrap notification is sent when the UNI down event is detected and the transmitting switch is turned on. 
.1.3.6.1.4.1.11.2.14.11.15.2.42.5.2.0.3,HPN-ICF-EPON-UNI-MIB::hpnicfEponUniLoopBackDetectedTrap,,,,,, A hpnicfEponUniLoopBackDetectedTrap notification is sent when the UNI loopback event is detected. 
.1.3.6.1.4.1.11.2.14.11.15.2.42.5.2.0.4,HPN-ICF-EPON-UNI-MIB::hpnicfEponUniLoopBackRecoveredTrap,,,,,, A hpnicfEponUniLoopBackRecoveredTrap notification is sent when the UNI loopback is recovered. 
.1.3.6.1.4.1.11.2.14.11.15.2.42.6,HPN-ICF-EPON-FB-MIB::hpnicfEponFBMibObjects,,,,,, The objects in this MIB module are used to manage and display current configuration of fiber backup groups based on EPON OLT port. 
.1.3.6.1.4.1.11.2.14.11.15.2.42.6.1,HPN-ICF-EPON-FB-MIB::hpnicfEponFBMIB,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.2.42.6.1.1,HPN-ICF-EPON-FB-MIB::hpnicfEponFBMIBTable,,not-accessible,,current,,This table defines several optical fiber-backup system parameters.
.1.3.6.1.4.1.11.2.14.11.15.2.42.6.1.1.1,HPN-ICF-EPON-FB-MIB::hpnicfEponFBMIBEntry,,not-accessible,hpnicfEponFBGroupIndex,current,,The entry of hpnicfEponFBMIBTable.
.1.3.6.1.4.1.11.2.14.11.15.2.42.6.1.1.1.1,HPN-ICF-EPON-FB-MIB::hpnicfEponFBGroupIndex,Integer32,not-accessible,,current,,The EPON fiber-backup group ID.
.1.3.6.1.4.1.11.2.14.11.15.2.42.6.1.1.1.2,HPN-ICF-EPON-FB-MIB::hpnicfEponFBGroupRowStatus,INTEGER,read-create,,current,active(1):notInService(2):notReady(3):createAndGo(4):createAndWait(5):destroy(6),This object allows entry to be created and deleted from the hpnicfEponFBMIBTable.
.1.3.6.1.4.1.11.2.14.11.15.2.42.6.1.1.1.3,HPN-ICF-EPON-FB-MIB::hpnicfEponFBMasterPort,Integer32,read-create,,current,,OLT port ifindex of the fiber-backup group. Use it to set or get the group master port.
.1.3.6.1.4.1.11.2.14.11.15.2.42.6.1.1.1.4,HPN-ICF-EPON-FB-MIB::hpnicfEponFBSlavePort,Integer32,read-create,,current,,OLT port ifindex of the fiber-backup group. Use it to set or get the group slave port. hpnicfEponFBSlavePort must be set after hpnicfEponFBMasterPort. 
.1.3.6.1.4.1.11.2.14.11.15.2.42.6.1.1.1.5,HPN-ICF-EPON-FB-MIB::hpnicfEponFBMasterPortStatus,INTEGER,read-only,,current,active(1):down(2),The master port status of the fiber-backup group. The active state indicates that the port's role is master, the olt chip is right and the optical module is inserted. The down state indicates others conditions.
.1.3.6.1.4.1.11.2.14.11.15.2.42.6.1.1.1.6,HPN-ICF-EPON-FB-MIB::hpnicfEponFBSlavePortStatus,INTEGER,read-only,,current,ready(1):down(2),The slave port status of the fiber-backup group. The ready state indicates that the port's role is slave, the olt chip is right and optical module is inserted. The down state indicates others conditions.
.1.3.6.1.4.1.11.2.14.11.15.2.42.6.1.1.1.7,HPN-ICF-EPON-FB-MIB::hpnicfEponFBSwitchover,INTEGER,read-create,,current,false(1):true(2),Switch the fiber backup group's two port manually. The group must has two ports and the value of hpnicfEponFBSlavePortStatus must be ready before Switchover. after Switchover the port's role will be changed. The value true is for switch-over. The default value is false.
.1.3.6.1.4.1.11.2.14.11.15.2.43,HPN-ICF-OID-MIB::hpnicfDldp,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.2.43.1,HPN-ICF-DLDP-MIB::hpnicfDLDPMibObject,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.2.43.1.1,HPN-ICF-DLDP-MIB::hpnicfDLDPConfigGroup,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.2.43.1.1.1,HPN-ICF-DLDP-MIB::hpnicfDLDPWorkMode,INTEGER,read-write,,current,normal(1):enhance(2),The work mode of DLDP. Normal mode means DLDP does not detect neighbor on its own initiative when all neighbors aged. Enhance mode means DLDP detects neighbor on its own initiative when all neighbors aged. 
.1.3.6.1.4.1.11.2.14.11.15.2.43.1.1.2,HPN-ICF-DLDP-MIB::hpnicfDLDPSystemEnable,INTEGER,read-write,,current,true(1):false(2),DLDP enable or disable systematically. This node only supports set operation. If setting it to true, all the fiber ports will enable DLDP and the agent automatically creates new rows for each port in hpnicfDLDPPortDLDPTable. If setting it to false, all the fiber ports will disable DLDP and the agent automatically destroy the corresponding rows in hpnicfDLDPPortDLDPTable.
.1.3.6.1.4.1.11.2.14.11.15.2.43.1.1.3,HPN-ICF-DLDP-MIB::hpnicfDLDPSystemReset,INTEGER,read-write,,current,true(1):false(2),DLDP reset systematically. This node only supports set operation. If the value of hpnicfDLDPSystemReset is true, and the current state is disable, it will change to inactive while the port is down or active while the port is up. If hpnicfDLDPPortDLDPState is not disable, it does not change. 
.1.3.6.1.4.1.11.2.14.11.15.2.43.1.1.4,HPN-ICF-DLDP-MIB::hpnicfDLDPInterval,INTEGER,read-write,,current,,The interval of sending an advertisement PDU. unit : second 
.1.3.6.1.4.1.11.2.14.11.15.2.43.1.1.5,HPN-ICF-DLDP-MIB::hpnicfDLDPAuthenticationMode,INTEGER,read-write,,current,none(1):simple(2):md5(3),Type of authentication mode.
.1.3.6.1.4.1.11.2.14.11.15.2.43.1.1.6,HPN-ICF-DLDP-MIB::hpnicfDLDPAuthenticationPassword,OCTET,read-write,,current,,This is the password for authentication. If the value of hpnicfDLDPAuthenticationMode is null, the user cannot set this node. If the value of hpnicfDLDPAuthenticationMode is simple or MD5, the user must set this node with a string. When the user gets or walks this node, it displays a cipher password if hpnicfDLDPAuthenticationMode is MD5 or simple or a zero-length string if hpnicfDLDPAuthenticationMode is null. 
.1.3.6.1.4.1.11.2.14.11.15.2.43.1.1.7,HPN-ICF-DLDP-MIB::hpnicfDLDPUnidirectionalShutdown,INTEGER,read-write,,current,auto(1):manual(2),The mode of unidirectional shutdown. It indicates the shutdown mode when a unidirectional link happened. Auto mode means the port will be shut down automatically when DLDP detects unidirectional link. Manual mode means the port needs to be shut down by the administrator manually when DLDP detects unidirectional link. 
.1.3.6.1.4.1.11.2.14.11.15.2.43.1.2,HPN-ICF-DLDP-MIB::hpnicfDLDPPortStateTable,,not-accessible,,current,,The table of the Ethernet ports of a LAN switch.
.1.3.6.1.4.1.11.2.14.11.15.2.43.1.2.1,HPN-ICF-DLDP-MIB::hpnicfDLDPPortStateEntry,,not-accessible,ifIndex,current,,Information about a hpnicfDLDPPortDLDPTable entity.
.1.3.6.1.4.1.11.2.14.11.15.2.43.1.2.1.1,HPN-ICF-DLDP-MIB::hpnicfDLDPPortState,INTEGER,read-write,,current,enabled(1):disabled(2),State of a port. If setting it to enabled, the port will enable DLDP and a new row will be added in hpnicfDLDPPortDLDPTable for this port. If setting it to disabled, the port will disable DLDP and the corresponding row will be destroyed in hpnicfDLDPPortDLDPTable.
.1.3.6.1.4.1.11.2.14.11.15.2.43.1.3,HPN-ICF-DLDP-MIB::hpnicfDLDPPortDLDPTable,,not-accessible,,current,,Table of a LAN switch's ports, which enable DLDP.
.1.3.6.1.4.1.11.2.14.11.15.2.43.1.3.1,HPN-ICF-DLDP-MIB::hpnicfDLDPPortDLDPEntry,,not-accessible,ifIndex,current,,The information of a port, which enable DLDP.
.1.3.6.1.4.1.11.2.14.11.15.2.43.1.3.1.1,HPN-ICF-DLDP-MIB::hpnicfDLDPPortDLDPState,INTEGER,read-only,,current,initial(1):inactive(2):active(3):advertisement(4):probe(5):disable(6),Operating state of DLDP on the port. It is relational with hpnicfDLDPPortState and hpnicfDLDPLinkState.
.1.3.6.1.4.1.11.2.14.11.15.2.43.1.3.1.2,HPN-ICF-DLDP-MIB::hpnicfDLDPLinkState,INTEGER,read-only,,current,down(1):up(2):unknown(3),The link state of the port.
.1.3.6.1.4.1.11.2.14.11.15.2.43.1.3.1.3,HPN-ICF-DLDP-MIB::hpnicfDLDPPortDLDPReset,INTEGER,read-write,,current,true(1):false(2),DLDP reset systematically. This node only supports set operation. If the value of hpnicfDLDPPortDLDPReset is true, and the current state is disable, it will change to inactive while the port is down or active while the port is up. 
.1.3.6.1.4.1.11.2.14.11.15.2.43.1.4,HPN-ICF-DLDP-MIB::hpnicfDLDPNeighborTable,,not-accessible,,current,,Table of a port's neighbors.
.1.3.6.1.4.1.11.2.14.11.15.2.43.1.4.1,HPN-ICF-DLDP-MIB::hpnicfDLDPNeighborEntry,,not-accessible,ifIndex:hpnicfDLDPNeighborBridgeMac:hpnicfDLDPNeighborPortIndex,current,,The information of a neighbor.
.1.3.6.1.4.1.11.2.14.11.15.2.43.1.4.1.1,HPN-ICF-DLDP-MIB::hpnicfDLDPNeighborBridgeMac,OCTET,not-accessible,,current,,The bridge MAC address of a neighbor.
.1.3.6.1.4.1.11.2.14.11.15.2.43.1.4.1.2,HPN-ICF-DLDP-MIB::hpnicfDLDPNeighborPortIndex,Integer32,not-accessible,,current,,The port index of a neighbor.
.1.3.6.1.4.1.11.2.14.11.15.2.43.1.4.1.3,HPN-ICF-DLDP-MIB::hpnicfDLDPNeighborState,INTEGER,read-only,,current,unidirection(1):bidirection(2):unknown(3),The state of a neighbor.
.1.3.6.1.4.1.11.2.14.11.15.2.43.1.4.1.4,HPN-ICF-DLDP-MIB::hpnicfDLDPNeighborAgingTime,Integer32,read-only,,current,,The aging time of a neighbor. unit: second.
.1.3.6.1.4.1.11.2.14.11.15.2.43.2,HPN-ICF-DLDP-MIB::hpnicfDLDPTrapObject,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.2.43.2.1,HPN-ICF-DLDP-MIB::hpnicfDLDPNotification,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.2.43.2.1.1,HPN-ICF-DLDP-MIB::hpnicfDLDPUnidirectionalPort,,,,,,It will send a SNMP trap when the state of a port has changed to unidirectional-link.
.1.3.6.1.4.1.11.2.14.11.15.2.44,HPN-ICF-OID-MIB::hpnicfUnicast,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.2.44.1,HPN-ICF-UNICAST-MIB::hpnicfURPFTable,,not-accessible,,current,, Unicast Reverse Path Forwarding (URPF) is used to prevent the network attacks caused by source address spoofing. This table is used to configure URPF on specific interfaces.
.1.3.6.1.4.1.11.2.14.11.15.2.44.1.1,HPN-ICF-UNICAST-MIB::hpnicfURPFEntry,,not-accessible,hpnicfURPFIfIndex,current,, The entry of hpnicfURPFTable, indexed by vlan interface index.
.1.3.6.1.4.1.11.2.14.11.15.2.44.1.1.1,HPN-ICF-UNICAST-MIB::hpnicfURPFIfIndex,Integer32,not-accessible,,current,, The ifIndex of vlan interface.
.1.3.6.1.4.1.11.2.14.11.15.2.44.1.1.2,HPN-ICF-UNICAST-MIB::hpnicfURPFEnabled,INTEGER,read-write,,current,true(1):false(2), This object is used to enable or disable URPF on certain vlan interfaces.
.1.3.6.1.4.1.11.2.14.11.15.2.44.1.1.3,HPN-ICF-UNICAST-MIB::hpnicfURPFSlotID,Integer32,read-write,,current,, This object specifies to which slot packets are redirected in order to perform URPF check.
.1.3.6.1.4.1.11.2.14.11.15.2.44.1.1.4,HPN-ICF-UNICAST-MIB::hpnicfURPFTotalReceivedPacket,Counter64,read-only,,current,, This object provides total received packets number.
.1.3.6.1.4.1.11.2.14.11.15.2.44.1.1.5,HPN-ICF-UNICAST-MIB::hpnicfURPFDroppedPacket,Counter64,read-only,,current,, This object provides total dropped invalid packets number.
.1.3.6.1.4.1.11.2.14.11.15.2.44.1.1.6,HPN-ICF-UNICAST-MIB::hpnicfURPFClearStat,INTEGER,read-write,,current,reserved(0):reset(1), This object is used to clear the URPF statistics on certain vlan interfaces. This object is actually a write-only object. When read, it always returns 0. When set to 1, the objects hpnicfURPFTotalReceivedPacket and hpnicfURPFDroppedPacket are reset to 0.
.1.3.6.1.4.1.11.2.14.11.15.2.45,HPN-ICF-OID-MIB::hpnicfRrpp,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.2.45.1,HPN-ICF-RRPP-MIB::hpnicfRrppScalarGroup,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.2.45.1.1,HPN-ICF-RRPP-MIB::hpnicfRrppEnableStatus,INTEGER,read-write,,current,enabled(1):disabled(2),Indicating whether the RRPP is enabled on this switch.
.1.3.6.1.4.1.11.2.14.11.15.2.45.1.2,HPN-ICF-RRPP-MIB::hpnicfRrppPassword,OCTET,read-write,,current,,Password configured for RRPP nodes to identify the validity of a link-down message. This value must be set together with hpnicfRrppPasswordType which indicates whether this value can be got. This value can not be set alone without configuring hpnicfRrppPasswordType.
.1.3.6.1.4.1.11.2.14.11.15.2.45.1.3,HPN-ICF-RRPP-MIB::hpnicfRrppPasswordType,INTEGER,read-write,,current,simple(1):cipher(2),Indicating whether the hpnicfRrppPassword can be got. simple(1):hpnicfRrppPassword can be got. cipher(2):hpnicfRrppPassword can not be got. This value can not be set alone without configuring hpnicfRrppPassword.
.1.3.6.1.4.1.11.2.14.11.15.2.45.1.4,HPN-ICF-RRPP-MIB::hpnicfRrppProtectVlanConfigMode,INTEGER,read-only,,current,vlan(1):instance(2),Indicating the mode in which the protected VLANs of an RRPP domain are configured. The value 'vlan' indicates that hpnicfRrppDomainProtectVlanListLow and hpnicfRrppDomainProtectVlanListHigh can be used for setting protected VLANs, while hpnicfRrppDomainInstanceListLow and hpnicfRrppDomainInstanceListHigh cannot. By contraries, the value 'instance' indicates that 3cRrppDomainInstanceListLow and hpnicfRrppDomainInstanceListHigh can be used for setting protected VLANs while the other two cannot.
.1.3.6.1.4.1.11.2.14.11.15.2.45.2,HPN-ICF-RRPP-MIB::hpnicfRrppTable,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.2.45.2.1,HPN-ICF-RRPP-MIB::hpnicfRrppDomainTable,,not-accessible,,current,,A table containing information about configurations and status of a RRPP domain.
.1.3.6.1.4.1.11.2.14.11.15.2.45.2.1.1,HPN-ICF-RRPP-MIB::hpnicfRrppDomainEntry,,not-accessible,hpnicfRrppDomainID,current,,Detailed information of a specified RRPP domain.
.1.3.6.1.4.1.11.2.14.11.15.2.45.2.1.1.1,HPN-ICF-RRPP-MIB::hpnicfRrppDomainID,Integer32,accessible-for-notify,,current,,An index uniquely identifies a RRPP domain, which ranges from 1~16. This value can't be modified after created.
.1.3.6.1.4.1.11.2.14.11.15.2.45.2.1.1.2,HPN-ICF-RRPP-MIB::hpnicfRrppDomainControlVlanID,Integer32,read-create,,current,,Index of the control VLAN specified to a domain. The value 65535 indicates the control VLAN has not been configured. The VLAN assigned to a RRPP Domain must not have been created. This value can't be modified after created.
.1.3.6.1.4.1.11.2.14.11.15.2.45.2.1.1.3,HPN-ICF-RRPP-MIB::hpnicfRrppDomainHelloTime,Integer32,read-create,,current,,The value indicates the interval between two hello packets sent by master-node, and its unit is second. The value ranges from 1s~10s.
.1.3.6.1.4.1.11.2.14.11.15.2.45.2.1.1.4,HPN-ICF-RRPP-MIB::hpnicfRrppDomainFailTime,Integer32,read-create,,current,,The expiration value of the fail-period timer and its unit is second. If not receiving hello packets before this expires, the master-node considers the ring is broken. The value of this node ranging from 3s~30s must not be less than triple hpnicfRrppDomainHelloTime's value.
.1.3.6.1.4.1.11.2.14.11.15.2.45.2.1.1.5,HPN-ICF-RRPP-MIB::hpnicfRrppDomainRowStatus,INTEGER,read-create,,current,active(1):notInService(2):notReady(3):createAndGo(4):createAndWait(5):destroy(6),This object is responsible for managing the creation, deletion and modification of rows, which support active status and CreatAndGo, destroy operation.
.1.3.6.1.4.1.11.2.14.11.15.2.45.2.1.1.6,HPN-ICF-RRPP-MIB::hpnicfRrppDomainInstanceListLow,OCTET,read-create,,current,,Each octet contained in this value specifies an eight-instance group, with the first octet specifying instances 0 through 7, the second octet specifying instances 8 through 15, and so on. Within each octet, the most significant bit represents the highest numbered instance, and the least significant bit represents the lowest numbered instance. Thus, each instance to which the protected VLANs of an RRPP domain are mapped corresponds to a bit within the value of this object. A bit with a value of '1' indicates that the VLANs mapped to the instance are protected VLANs of the RRPP domain. By contraries, the VLANs mapped to the instance are not protected VLANs if the corresponding bit has a value of '0'. The value of this object must be set with hpnicfRrppDomainInstanceListHigh at the same time when a SET operation is performed. This object is valid only when the value of hpnicfRrppProtectVlanConfigMode is 'instance'. If this object is invalid, it does not respond to SET operation, and it returns all '0' bits in response to GET operation.
.1.3.6.1.4.1.11.2.14.11.15.2.45.2.1.1.7,HPN-ICF-RRPP-MIB::hpnicfRrppDomainInstanceListHigh,OCTET,read-create,,current,,Each octet contained in this value specifies an eight-instance group, with the first octet specifying instances 2048 through 2055, the second octet specifying instances 2056 through 2063, and so on. Within each octet, the most significant bit represents the highest numbered instance, and the least significant bit represents the lowest numbered instance. The most significant bit of the last octet is invalid. Thus, each instance to which the protected VLANs of an RRPP domain are mapped corresponds to a bit within the value of this object. A bit with a value of '1' indicates that the VLANs mapped to the instance are protected VLANs of the RRPP domain. By contraries, the VLANs mapped to the instance are not protected VLANs if the corresponding bit has a value of '0'. The value of this object must be set with hpnicfRrppDomainInstanceListLow at the same time when a SET operation is performed. This object is valid only when the value of hpnicfRrppProtectVlanConfigMode is 'instance'. If this object is invalid, it does not respond to SET operation, and it returns all '0' bits in response to GET operation.
.1.3.6.1.4.1.11.2.14.11.15.2.45.2.1.1.8,HPN-ICF-RRPP-MIB::hpnicfRrppDomainProtectVlanListLow,OCTET,read-create,,current,,Each octet contained in this value specifies an eight-VLAN group, with the first octet specifying VLANs 1 through 7, the second octet specifying VLANs 8 through 15, and so on. Within each octet, the most significant bit represents the highest numbered VLAN, and the least significant bit represents the lowest numbered VLAN. The least significant bit of the first octet is invalid. Thus, each protected VLAN of an RRPP domain corresponds to a bit within the value of this object. A bit with a value of '1' indicates that the corresponding VLAN is a protected VLAN of the RRPP domain. By contraries, the VLAN is not a protected VLAN if the corresponding bit has a value of '0'. The value of this object must be set with hpnicfRrppDomainProtectVlanListHigh at the same time when a SET operation is performed. This object is valid only when the value of hpnicfRrppProtectVlanConfigMode is 'vlan'. If this object is invalid, it does not respond to SET operation, and it returns all '0' bits in response to GET operation.
.1.3.6.1.4.1.11.2.14.11.15.2.45.2.1.1.9,HPN-ICF-RRPP-MIB::hpnicfRrppDomainProtectVlanListHigh,OCTET,read-create,,current,,Each octet contained in this value specifies an eight-VLAN group, with the first octet specifying VLANs 2048 through 2055, the second octet specifying VLANs 2056 through 2063, and so on. Within each octet, the most significant bit represents the highest numbered VLAN, and the least significant bit represents the lowest numbered VLAN. The most significant bit of the last octet is invalid. Thus, each protected VLAN of an RRPP domain corresponds to a bit within the value of this object. A bit with a value of '1' indicates that the corresponding VLAN is a protected VLAN of the RRPP domain. By contraries, the VLAN is not a protected VLAN if the corresponding bit has a value of '0'. The value of this object must be set with hpnicfRrppDomainProtectVlanListLow at the same time when a SET operation is performed. This object is valid only when the value of hpnicfRrppProtectVlanConfigMode is 'vlan'. If this object is invalid, it does not respond to SET operation, and it returns all '0' bits in response to GET operation.
.1.3.6.1.4.1.11.2.14.11.15.2.45.2.2,HPN-ICF-RRPP-MIB::hpnicfRrppRingTable,,not-accessible,,current,,A table containing information about configurations and status of a RRPP Ring.
.1.3.6.1.4.1.11.2.14.11.15.2.45.2.2.1,HPN-ICF-RRPP-MIB::hpnicfRrppRingEntry,,not-accessible,hpnicfRrppDomainID:hpnicfRrppRingID,current,,Detailed information of a specified RRPP Ring.
.1.3.6.1.4.1.11.2.14.11.15.2.45.2.2.1.1,HPN-ICF-RRPP-MIB::hpnicfRrppRingID,Integer32,accessible-for-notify,,current,,An index uniquely identifies a RRPP Ring, which ranges from 1~64. This value can't be modified after created.
.1.3.6.1.4.1.11.2.14.11.15.2.45.2.2.1.2,HPN-ICF-RRPP-MIB::hpnicfRrppRingEnableStatus,INTEGER,read-create,,current,enabled(1):disabled(2),Indicating whether the RRPP is enabled on this Ring. NOTE: If major-ring and sub-ring(s) of a domain coexist on a switch, major-ring must be enabled before sub-ring is enabled. And sub-ring must be disabled before major-ring is disabled.
.1.3.6.1.4.1.11.2.14.11.15.2.45.2.2.1.3,HPN-ICF-RRPP-MIB::hpnicfRrppRingActive,INTEGER,read-only,,current,active(1):inactive(2),As both hpnicfRrppEnableStatus and hpnicfRrppRingEnableStatus are enabled, the ring is activated. Whereas either of the two items is disabled, the ring is inactive.
.1.3.6.1.4.1.11.2.14.11.15.2.45.2.2.1.4,HPN-ICF-RRPP-MIB::hpnicfRrppRingState,INTEGER,read-only,,current,unknown(1):health(2):fault(3),The status (i.e. unknown, health or fault) of the Ethernet ring. This is valid only on the master-node.
.1.3.6.1.4.1.11.2.14.11.15.2.45.2.2.1.5,HPN-ICF-RRPP-MIB::hpnicfRrppRingNodeMode,INTEGER,read-create,,current,master(1):transit(2):edge(3):assistantEdge(4),There are four RRPP node modes for the switch on a RRPP ring, such as master, transit, edge and assistant-edge. Each RRPP ring has a single designated master-node. All other nodes except edge-node and assistant-edge-node on that ring are referred to as transit-nodes. The node mode of edge and assistant-edge should be configured only on sub-ring. When there is a common link between a sub-ring and its major-ring, the node mode of the sub-ring must be edge or assistant-edge, and they must be configured in pairs. If node mode is designated as edge or assistant-edge, several points should be noticed: Major-ring must be created before a sub-ring is created; Major-ring can't be deleted unless all its sub-rings are deleted; The node mode of the switch on major-ring must be transit; Major-ring and sub-ring must have only a common port. This value can't be modified after created.
.1.3.6.1.4.1.11.2.14.11.15.2.45.2.2.1.6,HPN-ICF-RRPP-MIB::hpnicfRrppRingPrimaryPort,Integer32,read-create,,current,,If the switch is a master-node or transit-node, this value is the primary port ifIndex; otherwise, if the switch is a edge-node or assistant-edge-node, this value is the common port ifIndex. This value can't be modified after created.
.1.3.6.1.4.1.11.2.14.11.15.2.45.2.2.1.7,HPN-ICF-RRPP-MIB::hpnicfRrppRingSecondaryPort,Integer32,read-create,,current,,If the switch is a master-node or transit-node, this value is the secondary port ifIndex; otherwise, if the switch is an edge-node or assistant-edge-node, this value is the edge port ifIndex. This value can't be modified after created.
.1.3.6.1.4.1.11.2.14.11.15.2.45.2.2.1.8,HPN-ICF-RRPP-MIB::hpnicfRrppRingLevel,INTEGER,read-create,,current,majorRing(1):subRing(2),Level of a ring. This field should be set 1 on major-ring and 2 on the sub-ring. This value can't be modified after created.
.1.3.6.1.4.1.11.2.14.11.15.2.45.2.2.1.9,HPN-ICF-RRPP-MIB::hpnicfRrppRingRowStatus,INTEGER,read-create,,current,active(1):notInService(2):notReady(3):createAndGo(4):createAndWait(5):destroy(6),This object is responsible for managing the creation, deletion and modification of rows, which support active status and CreatAndGo, destroy operation. To create a new row, hpnicfRrppRingNodeMode, hpnicfRrppRingPrimaryPort, hpnicfRrppRingSecondaryPort and hpnicfRrppRingLevel must be specified.
.1.3.6.1.4.1.11.2.14.11.15.2.45.2.3,HPN-ICF-RRPP-MIB::hpnicfRrppPortTable,,not-accessible,,current,,A table containing information about configurations and status of a RRPP port.
.1.3.6.1.4.1.11.2.14.11.15.2.45.2.3.1,HPN-ICF-RRPP-MIB::hpnicfRrppPortEntry,,not-accessible,hpnicfRrppDomainID:hpnicfRrppRingID:hpnicfRrppPortID,current,,Detailed information of a specified RRPP port.
.1.3.6.1.4.1.11.2.14.11.15.2.45.2.3.1.1,HPN-ICF-RRPP-MIB::hpnicfRrppPortID,Integer32,not-accessible,,current,,ifIndex of the port.
.1.3.6.1.4.1.11.2.14.11.15.2.45.2.3.1.2,HPN-ICF-RRPP-MIB::hpnicfRrppPortRole,INTEGER,read-only,,current,primary(1):secondary(2):common(3):edge(4),The RRPP role of the port. (i.e. primary, secondary, common or edge port).
.1.3.6.1.4.1.11.2.14.11.15.2.45.2.3.1.3,HPN-ICF-RRPP-MIB::hpnicfRrppPortState,INTEGER,read-only,,current,unknown(1):unblocked(2):blocked(3):down(4),State of RRPP port, including unknown, unblocked, blocked and down.
.1.3.6.1.4.1.11.2.14.11.15.2.45.2.3.1.4,HPN-ICF-RRPP-MIB::hpnicfRrppPortRXError,Counter32,read-only,,current,,The statistics of illegal RRPP packets received from this port.
.1.3.6.1.4.1.11.2.14.11.15.2.45.2.3.1.5,HPN-ICF-RRPP-MIB::hpnicfRrppPortRXHello,Counter32,read-only,,current,,The statistics of hello packets received from this port on specified ring.
.1.3.6.1.4.1.11.2.14.11.15.2.45.2.3.1.6,HPN-ICF-RRPP-MIB::hpnicfRrppPortRXLinkUp,Counter32,read-only,,current,,The statistics of link-up packets received from this port on specified ring.
.1.3.6.1.4.1.11.2.14.11.15.2.45.2.3.1.7,HPN-ICF-RRPP-MIB::hpnicfRrppPortRXLinkDown,Counter32,read-only,,current,,The statistics of link-down packets received from this port on specified ring.
.1.3.6.1.4.1.11.2.14.11.15.2.45.2.3.1.8,HPN-ICF-RRPP-MIB::hpnicfRrppPortRXCommonFlush,Counter32,read-only,,current,,The statistics of common-flush packets received from this port on specified ring. Instruction When master-node receives valid link-down packets or link-up packets, it will send common-flush packets, instructing the other nodes on the ring to flush their forwarding database. When the nodes except master-node receive common-flush, they will flush forwarding database. If there is any port blocked on that node, it won't be unblocked.
.1.3.6.1.4.1.11.2.14.11.15.2.45.2.3.1.9,HPN-ICF-RRPP-MIB::hpnicfRrppPortRXCompleteFlush,Counter32,read-only,,current,,The statistics of complete-flush packets received from this port on specified ring. Instruction When the ring recovers, master-node will receive its own hello packets. It will send complete-flush packets, instructing the other nodes on the ring to flush their forwarding database. When the nodes except master-node receive complete-flush, they will flush forwarding database. If there is any port blocked on that node, it will be unblocked.
.1.3.6.1.4.1.11.2.14.11.15.2.45.2.3.1.10,HPN-ICF-RRPP-MIB::hpnicfRrppPortTXHello,Counter32,read-only,,current,,The statistics of hello packets sent from this port on specified ring.
.1.3.6.1.4.1.11.2.14.11.15.2.45.2.3.1.11,HPN-ICF-RRPP-MIB::hpnicfRrppPortTXLinkUp,Counter32,read-only,,current,,The statistics of link-up packets sent from this port on specified ring.
.1.3.6.1.4.1.11.2.14.11.15.2.45.2.3.1.12,HPN-ICF-RRPP-MIB::hpnicfRrppPortTXLinkDown,Counter32,read-only,,current,,The statistics of link-down packets sent from this port on specified ring.
.1.3.6.1.4.1.11.2.14.11.15.2.45.2.3.1.13,HPN-ICF-RRPP-MIB::hpnicfRrppPortTXCommonFlush,Counter32,read-only,,current,,The statistics of common-flush packets sent from this port on specified ring.
.1.3.6.1.4.1.11.2.14.11.15.2.45.2.3.1.14,HPN-ICF-RRPP-MIB::hpnicfRrppPortTXCompleteFlush,Counter32,read-only,,current,,The statistics of complete-flush packets sent from this port on specified ring.
.1.3.6.1.4.1.11.2.14.11.15.2.45.2.3.1.15,HPN-ICF-RRPP-MIB::hpnicfRrppPortRXEdgeHello,Counter32,read-only,,current,,The statistics of edge-hello packets received from this port on specified ring. When edge-node sends edge-hello packets, assistantEdge-node will receive its own edge-hello packets from the common link and the master ring.
.1.3.6.1.4.1.11.2.14.11.15.2.45.2.3.1.16,HPN-ICF-RRPP-MIB::hpnicfRrppPortRXMajorFault,Counter32,read-only,,current,,The statistics of major-fault packets received from this port on specified ring. When assistantEdge can't receive edge-hello packets in the specified fault-time, assistantEdge-node will send its own major-fault packets from the edge port around the sub ring. Edge-node will receive the major-fault packets from its edge port. Then Edge-node will block its edge port.
.1.3.6.1.4.1.11.2.14.11.15.2.45.2.3.1.17,HPN-ICF-RRPP-MIB::hpnicfRrppPortTXEdgeHello,Counter32,read-only,,current,,The statistics of edge-hello packets sent from this port on specified ring.
.1.3.6.1.4.1.11.2.14.11.15.2.45.2.3.1.18,HPN-ICF-RRPP-MIB::hpnicfRrppPortTXMajorFault,Counter32,read-only,,current,,The statistics of major-fault packets sent from this port on specified ring.
.1.3.6.1.4.1.11.2.14.11.15.2.45.3,HPN-ICF-RRPP-MIB::hpnicfRrppNotifications,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.2.45.3.1,HPN-ICF-RRPP-MIB::hpnicfRrppRingRecover,,,,,,Trap message is generated by master-node on the ring when the ring recovers from fault.
.1.3.6.1.4.1.11.2.14.11.15.2.45.3.2,HPN-ICF-RRPP-MIB::hpnicfRrppRingFail,,,,,,Trap message is generated by master-node on the ring when the ring fails.
.1.3.6.1.4.1.11.2.14.11.15.2.45.3.3,HPN-ICF-RRPP-MIB::hpnicfRrppMultiMaster,,,,,,Trap message is generated by master-node when it detects there are more than one master-node on the ring.
.1.3.6.1.4.1.11.2.14.11.15.2.45.3.4,HPN-ICF-RRPP-MIB::hpnicfRrppMajorFault,,,,,,Trap message is generated by edge-node or assistant-edge-node when it detects major fault.
.1.3.6.1.4.1.11.2.14.11.15.2.46,HPN-ICF-OID-MIB::hpnicfDomain,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.2.46.1,HPN-ICF-DOMAIN-MIB::hpnicfDomainControl,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.2.46.1.1,HPN-ICF-DOMAIN-MIB::hpnicfDomainDefault,OCTET,read-write,,current,,Specifies default domain on the equipment. Default value is 'system'.
.1.3.6.1.4.1.11.2.14.11.15.2.46.2,HPN-ICF-DOMAIN-MIB::hpnicfDomainTables,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.2.46.2.1,HPN-ICF-DOMAIN-MIB::hpnicfDomainInfoTable,,not-accessible,,current,,The (conceptual) table listing the domains.
.1.3.6.1.4.1.11.2.14.11.15.2.46.2.1.1,HPN-ICF-DOMAIN-MIB::hpnicfDomainInfoEntry,,not-accessible,hpnicfDomainName,current,,An entry (conceptual row) representing a domain.
.1.3.6.1.4.1.11.2.14.11.15.2.46.2.1.1.1,HPN-ICF-DOMAIN-MIB::hpnicfDomainName,OCTET,not-accessible,,current,,An index uniquely identifies a domain. 
.1.3.6.1.4.1.11.2.14.11.15.2.46.2.1.1.2,HPN-ICF-DOMAIN-MIB::hpnicfDomainState,INTEGER,read-create,,current,active(1):block(2),The state of the domain, which reflects whether the domain is active. Default value is active.
.1.3.6.1.4.1.11.2.14.11.15.2.46.2.1.1.3,HPN-ICF-DOMAIN-MIB::hpnicfDomainMaxAccessNum,Integer32,read-create,,current,,The maximum number which the domain allows to access. If the value is set to 0, the access limit will be disabled.
.1.3.6.1.4.1.11.2.14.11.15.2.46.2.1.1.4,HPN-ICF-DOMAIN-MIB::hpnicfDomainVlanAssignMode,INTEGER,read-create,,current,integer(1):string(2):vlanlist(3),The vlan assignment mode. The mode SHOULD be the same as the mode of corresponding server. 1 (integer) - Integer Vlan assignment mode. 2 (string) - String Vlan assignment mode. 3 (vlanlist) - VLAN-List Vlan assignment mode. The default value is integer.
.1.3.6.1.4.1.11.2.14.11.15.2.46.2.1.1.5,HPN-ICF-DOMAIN-MIB::hpnicfDomainIdleCutEnable,INTEGER,read-create,,current,true(1):false(2),The idle cut control. Setting this attribute to true, the connection will be cut when the flow is less than hpnicfDomainIdleCutMinFlow and lasts hpnicfDomainIdleCutMaxTime. Default value is false.
.1.3.6.1.4.1.11.2.14.11.15.2.46.2.1.1.6,HPN-ICF-DOMAIN-MIB::hpnicfDomainIdleCutMaxTime,Integer32,read-create,,current,,The maximal time of idle-cut. The unit is minute. If the value of hpnicfDomainIdleCutEnable is false, the value of hpnicfDomainIdleCutMaxTime is meaningless.
.1.3.6.1.4.1.11.2.14.11.15.2.46.2.1.1.7,HPN-ICF-DOMAIN-MIB::hpnicfDomainIdleCutMinFlow,Integer32,read-create,,current,,The minimal flow of idle-cut. The unit is byte. If the value of hpnicfDomainIdleCutEnable is false, the value of hpnicfDomainIdleCutMinFlow is meaningless.
.1.3.6.1.4.1.11.2.14.11.15.2.46.2.1.1.8,HPN-ICF-DOMAIN-MIB::hpnicfDomainMessengerEnable,INTEGER,read-create,,current,true(1):false(2),The messenger service control. If set hpnicfDomainMessengerEnable to true, hpnicfDomainMessengerLimitTime and hpnicfDomainMessengerSpanTime must be set to valid values. Default value is false.
.1.3.6.1.4.1.11.2.14.11.15.2.46.2.1.1.9,HPN-ICF-DOMAIN-MIB::hpnicfDomainMessengerLimitTime,Integer32,read-create,,current,,The messenger service limit time. The unit is minute. If the value of hpnicfDomainMessengerEnable is false, the value of hpnicfDomainMessengerLimitTime is meaningless.
.1.3.6.1.4.1.11.2.14.11.15.2.46.2.1.1.10,HPN-ICF-DOMAIN-MIB::hpnicfDomainMessengerSpanTime,Integer32,read-create,,current,,The messenger service span time. The unit is minute. It must be a multiple of 5. If the value of hpnicfDomainMessengerEnable is false, the value of hpnicfDomainMessengerSpanTime is meaningless.
.1.3.6.1.4.1.11.2.14.11.15.2.46.2.1.1.11,HPN-ICF-DOMAIN-MIB::hpnicfDomainSelfServiceEnable,INTEGER,read-create,,current,true(1):false(2),The self service control. If set hpnicfDomainSelfServiceEnable to true, hpnicfDomainSelfServiceURL must be set to a valid value. Default value is FALSE.
.1.3.6.1.4.1.11.2.14.11.15.2.46.2.1.1.12,HPN-ICF-DOMAIN-MIB::hpnicfDomainSelfServiceURL,OCTET,read-create,,current,,Self-service URL(Uniform Resource Locator) of the domain.
.1.3.6.1.4.1.11.2.14.11.15.2.46.2.1.1.13,HPN-ICF-DOMAIN-MIB::hpnicfDomainAccFailureAction,INTEGER,read-create,,current,ignore(1):reject(2),Defines the action that authentication should be taken if authentication succeeds but the associated accounting start fails. 1 (ignore) - treat as authentication success; ignore accounting start failure. 2 (reject) - treat as authentication failed if corresponding accounting start fails. Default value is reject.
.1.3.6.1.4.1.11.2.14.11.15.2.46.2.1.1.14,HPN-ICF-DOMAIN-MIB::hpnicfDomainRowStatus,INTEGER,read-create,,current,active(1):notInService(2):notReady(3):createAndGo(4):createAndWait(5):destroy(6),This object is responsible for managing the creation, deletion and modification of rows, which supports active status and CreateAndGo, Destroy operation. To destroy an existent row, the domain of the row MUST NOT be used by user.
.1.3.6.1.4.1.11.2.14.11.15.2.46.2.1.1.15,HPN-ICF-DOMAIN-MIB::hpnicfDomainCurrentAccessNum,Integer32,read-only,,current,,The current access number of the domain.
.1.3.6.1.4.1.11.2.14.11.15.2.46.2.1.1.16,HPN-ICF-DOMAIN-MIB::hpnicfDomainIdleCutTime,TimeTicks,read-only,,current,,Authentication aging time. If no packet is transmitted during the aging time, the authentication is aged out.
.1.3.6.1.4.1.11.2.14.11.15.2.46.2.2,HPN-ICF-DOMAIN-MIB::hpnicfDomainSchemeTable,,not-accessible,,current,,The (conceptual) table listing schemes of all domains.
.1.3.6.1.4.1.11.2.14.11.15.2.46.2.2.1,HPN-ICF-DOMAIN-MIB::hpnicfDomainSchemeEntry,,not-accessible,hpnicfDomainName:hpnicfDomainSchemeIndex,current,,An entry (conceptual row) representing an IP pool of a domain
.1.3.6.1.4.1.11.2.14.11.15.2.46.2.2.1.1,HPN-ICF-DOMAIN-MIB::hpnicfDomainSchemeIndex,Integer32,not-accessible,,current,,The scheme index of domain, which is an identifier of a domain scheme.
.1.3.6.1.4.1.11.2.14.11.15.2.46.2.2.1.2,HPN-ICF-DOMAIN-MIB::hpnicfDomainSchemeMode,INTEGER,read-create,,current,none(1):local(2):radius(3):tacacs(4):ldap(5),The scheme mode of the domain. Setting hpnicfDomainSchemeMode to none(1) indicates the domain has none scheme. Setting hpnicfDomainSchemeMode to local(2) indicates the domain will use local-server as a scheme. Setting hpnicfDomainSchemeMode to radius(3), tacacs(4) or ldap(5) indicates the domain will use radius, tacacs or ldap scheme. If set hpnicfDomainSchemeMode to radius(3), tacacs(4) or ldap(5), hpnicfDomainAuthSchemeName and hpnicfDomainAcctSchemeName must be set to valid values. And if hpnicfDomainSchemeMode is set to none(1) or local(2), the value of hpnicfDomainAuthSchemeName and hpnicfDomainAcctSchemeName will be ignored.
.1.3.6.1.4.1.11.2.14.11.15.2.46.2.2.1.3,HPN-ICF-DOMAIN-MIB::hpnicfDomainAuthSchemeName,OCTET,read-create,,current,,The authentication scheme name of domain. If hpnicfDomainSchemeMode is set to radius, tacacs or ldap, the hpnicfDomainAuthSchemeName must be configured with a valid value.
.1.3.6.1.4.1.11.2.14.11.15.2.46.2.2.1.4,HPN-ICF-DOMAIN-MIB::hpnicfDomainAcctSchemeName,OCTET,read-create,,current,,The accounting scheme name of the domain. If hpnicfDomainSchemeMode is set to radius or tacacs, the hpnicfDomainAcctSchemeName must be configured with a valid value.
.1.3.6.1.4.1.11.2.14.11.15.2.46.2.2.1.5,HPN-ICF-DOMAIN-MIB::hpnicfDomainSchemeRowStatus,INTEGER,read-create,,current,active(1):notInService(2):notReady(3):createAndGo(4):createAndWait(5):destroy(6),This object is responsible for managing the creation, deletion and modification of rows, which supports active status and createAndGo, destroy operation. To create a new row, hpnicfDomainSchemeMode must be specified. To destroy an existent row, the scheme of the row MUST NOT be used by user.
.1.3.6.1.4.1.11.2.14.11.15.2.46.2.2.1.6,HPN-ICF-DOMAIN-MIB::hpnicfDomainSchemeAAAType,INTEGER,read-create,,current,accounting(1):authentication(2):authorization(3):none(4),Service Type of the server.
.1.3.6.1.4.1.11.2.14.11.15.2.46.2.2.1.7,HPN-ICF-DOMAIN-MIB::hpnicfDomainSchemeAAAName,OCTET,read-create,,current,,The scheme name of the domain, whether the scheme represents accounting, authentication or authorization references the object hpnicfDomainSchemeAAAType. The value of the object must be valid if the value of hpnicfDomainSchemeMode is radius or tacacs, the value of the object will be ignored if the value of hpnicfDomainSchemeMode is none or local. If the domain has no scheme, there will be a null string. If this object is supported, the objects hpnicfDomainAuthSchemeName and hpnicfDomainAcctSchemeName will be ignored.
.1.3.6.1.4.1.11.2.14.11.15.2.46.2.2.1.8,HPN-ICF-DOMAIN-MIB::hpnicfDomainSchemeAccessMode,INTEGER,read-create,,current,default(1):login(2):lanAccess(3):portal(4):ppp(5):gcm(6):dvpn(7):dhcp(8):voice(9):superauthen(10):command(11):reserved(12),The access mode of the domain scheme.
.1.3.6.1.4.1.11.2.14.11.15.2.46.2.3,HPN-ICF-DOMAIN-MIB::hpnicfDomainIpPoolTable,,not-accessible,,current,,The (conceptual) table listing IP pools of all domains.
.1.3.6.1.4.1.11.2.14.11.15.2.46.2.3.1,HPN-ICF-DOMAIN-MIB::hpnicfDomainIpPoolEntry,,not-accessible,hpnicfDomainName:hpnicfDomainIpPoolNum,current,,An entry (conceptual row) representing an IP pool of a domain.
.1.3.6.1.4.1.11.2.14.11.15.2.46.2.3.1.1,HPN-ICF-DOMAIN-MIB::hpnicfDomainIpPoolNum,Integer32,not-accessible,,current,,The number of IP pool, which is an identifier of an IP pool.
.1.3.6.1.4.1.11.2.14.11.15.2.46.2.3.1.2,HPN-ICF-DOMAIN-MIB::hpnicfDomainIpPoolLowIpAddrType,INTEGER,read-create,,current,unknown(0):ipv4(1):ipv6(2):ipv4z(3):ipv6z(4):dns(16),The low IP addresses type (IPv4 or IPv6) of IP pool.
.1.3.6.1.4.1.11.2.14.11.15.2.46.2.3.1.3,HPN-ICF-DOMAIN-MIB::hpnicfDomainIpPoolLowIpAddr,OCTET,read-create,,current,,The low IP address of IP pool.
.1.3.6.1.4.1.11.2.14.11.15.2.46.2.3.1.4,HPN-ICF-DOMAIN-MIB::hpnicfDomainIpPoolLen,Integer32,read-create,,current,,The length of IP pool. Default value is 1.
.1.3.6.1.4.1.11.2.14.11.15.2.46.2.3.1.5,HPN-ICF-DOMAIN-MIB::hpnicfDomainIpPoolRowStatus,INTEGER,read-create,,current,active(1):notInService(2):notReady(3):createAndGo(4):createAndWait(5):destroy(6),This object is responsible for managing the creation, deletion and modification of rows, which supports active status and CreateAndGo, Destroy operation. To create a new row, hpnicfDomainIpPoolNum and hpnicfDomainIpPoolLowIpAddr must be specified. To destroy an existent row, the IP pool of this row MUST NOT be used by user.
.1.3.6.1.4.1.11.2.14.11.15.2.47,HPN-ICF-OID-MIB::hpnicfIds,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.2.47.1,HPN-ICF-IDS-MIB::hpnicfIDSMib,,,,,,This MIB describes IDS private information. IDS(Instruction Detecting System) is used to detect intruder activity. 
.1.3.6.1.4.1.11.2.14.11.15.2.47.1.1,HPN-ICF-IDS-MIB::hpnicfIDSTrapGroup,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.2.47.1.1.1,HPN-ICF-IDS-MIB::hpnicfIDSTrapInfo,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.2.47.1.1.1.1,HPN-ICF-IDS-MIB::hpnicfIDSTrapIPFragmentQueueLen,Unsigned32,accessible-for-notify,,current,,The length of IP fragment queue.
.1.3.6.1.4.1.11.2.14.11.15.2.47.1.1.1.2,HPN-ICF-IDS-MIB::hpnicfIDSTrapStatSessionTabLen,Unsigned32,accessible-for-notify,,current,,The length of status session table.
.1.3.6.1.4.1.11.2.14.11.15.2.47.1.1.1.3,HPN-ICF-IDS-MIB::hpnicfIDSTrapIPAddressType,INTEGER,accessible-for-notify,,current,unknown(0):ipv4(1):ipv6(2):ipv4z(3):ipv6z(4):dns(16),The type of IP Address.
.1.3.6.1.4.1.11.2.14.11.15.2.47.1.1.1.4,HPN-ICF-IDS-MIB::hpnicfIDSTrapIPAddress,OCTET,accessible-for-notify,,current,,IP Address.
.1.3.6.1.4.1.11.2.14.11.15.2.47.1.1.1.5,HPN-ICF-IDS-MIB::hpnicfIDSTrapUserName,OCTET,accessible-for-notify,,current,,User name.
.1.3.6.1.4.1.11.2.14.11.15.2.47.1.1.1.6,HPN-ICF-IDS-MIB::hpnicfIDSTrapLoginType,INTEGER,accessible-for-notify,,current,telnet(1):ssh(2):web(3),Login type, including telnet, ssh and web.
.1.3.6.1.4.1.11.2.14.11.15.2.47.1.1.1.7,HPN-ICF-IDS-MIB::hpnicfIDSTrapUpgradeType,INTEGER,accessible-for-notify,,current,programme(1):crb(2):vrb(3),Upgrade type, including programme(system image), crb(custom rule base, one kind of configuration file), vrb(vendor rule base, one kind of configuration file).
.1.3.6.1.4.1.11.2.14.11.15.2.47.1.1.1.8,HPN-ICF-IDS-MIB::hpnicfIDSTrapCRLName,OCTET,accessible-for-notify,,current,,CRL(Certificate Revoke List) name.
.1.3.6.1.4.1.11.2.14.11.15.2.47.1.1.1.9,HPN-ICF-IDS-MIB::hpnicfIDSTrapCertName,OCTET,accessible-for-notify,,current,,Certificate name.
.1.3.6.1.4.1.11.2.14.11.15.2.47.1.1.1.10,HPN-ICF-IDS-MIB::hpnicfIDSTrapDetectRuleID,Unsigned32,accessible-for-notify,,current,,The rule ID which is a unique identifier for a specified detect rule.
.1.3.6.1.4.1.11.2.14.11.15.2.47.1.1.1.11,HPN-ICF-IDS-MIB::hpnicfIDSTrapEngineID,Integer32,accessible-for-notify,,current,,A unique number used to identify an interface.
.1.3.6.1.4.1.11.2.14.11.15.2.47.1.1.1.12,HPN-ICF-IDS-MIB::hpnicfIDSTrapFileName,OCTET,accessible-for-notify,,current,,The file name.
.1.3.6.1.4.1.11.2.14.11.15.2.47.1.1.1.13,HPN-ICF-IDS-MIB::hpnicfIDSTrapCfgLineInFile,Unsigned32,accessible-for-notify,,current,,The line number in the configuration file.
.1.3.6.1.4.1.11.2.14.11.15.2.47.1.1.1.14,HPN-ICF-IDS-MIB::hpnicfIDSTrapReasonForError,OCTET,accessible-for-notify,,current,,The information of the notification. Although the format and content of this object are device specific, they should be defined uniformly in the device.
.1.3.6.1.4.1.11.2.14.11.15.2.47.1.1.2,HPN-ICF-IDS-MIB::hpnicfIDSTrap,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.2.47.1.1.2.0,HPN-ICF-IDS-MIB::hpnicfIDSTrapPrefix,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.2.47.1.1.2.0.1,HPN-ICF-IDS-MIB::hpnicfIDSTrapIPFragQueueFull,,,,,,This notification will be generated when the IP fragment queue is full. The hpnicfIDSTrapIPFragmentQueueLen describes the length of current fragment queue. The hpnicfIDSTrapReasonForError describes reason for error.
.1.3.6.1.4.1.11.2.14.11.15.2.47.1.1.2.0.2,HPN-ICF-IDS-MIB::hpnicfIDSTrapStatSessTabFull,,,,,,This notification will be generated when the status session table is full. The hpnicfIDSTrapStatSessionTabLen describes the length of current status session table. The hpnicfIDSTrapReasonForError describes reason for error.
.1.3.6.1.4.1.11.2.14.11.15.2.47.1.1.2.0.3,HPN-ICF-IDS-MIB::hpnicfIDSTrapDetectRuleParseFail,,,,,,This notification will be generated when failing to parse the rules for detecting. The hpnicfIDSTrapDetectRuleID object describes rule ID. The hpnicfIDSTrapEngineID object identifies an interface the rule applies to. The hpnicfIDSTrapReasonForError object describes reason for error.
.1.3.6.1.4.1.11.2.14.11.15.2.47.1.1.2.0.4,HPN-ICF-IDS-MIB::hpnicfIDSTrapDBConnLost,,,,,,This notification will be generated when connecting with database server fails. The hpnicfIDSTrapIPAddressType object describes the IP address type of database server. The hpnicfIDSTrapIPAddress object describes the IP address of database server. The hpnicfIDSTrapReasonForError describes reason of connecting failure.
.1.3.6.1.4.1.11.2.14.11.15.2.47.1.1.2.0.5,HPN-ICF-IDS-MIB::hpnicfIDSTrapCRLNeedUpdate,,,,,,This notification will be generated when IDS device detects that CRL is out of date. The hpnicfIDSTrapCRLName object describes the CRL(Certificate Revoke List) name. The hpnicfIDSTrapReasonForError object describes reason for error.
.1.3.6.1.4.1.11.2.14.11.15.2.47.1.1.2.0.6,HPN-ICF-IDS-MIB::hpnicfIDSTrapCertOverdue,,,,,,This notification will be generated when IDS device detects that certificate is overdue. The hpnicfIDSTrapCertName object describes the certificate name. The hpnicfIDSTrapReasonForError object describes reason for error.
.1.3.6.1.4.1.11.2.14.11.15.2.47.1.1.2.0.7,HPN-ICF-IDS-MIB::hpnicfIDSTrapTooManyLoginFail,,,,,,This notification will be generated when the login failure times of a user over a certain number. The hpnicfIDSTrapUserName object describes the user name when logging in. The hpnicfIDSTrapIPAddressType object describes the IP address type of client. The hpnicfIDSTrapIPAddress object describes the IP address of client. The hpnicfIDSTrapLoginType object describes login type, including: telnet, ssh, web. The hpnicfIDSTrapReasonForError object describes reason for error.
.1.3.6.1.4.1.11.2.14.11.15.2.47.1.1.2.0.8,HPN-ICF-IDS-MIB::hpnicfIDSTrapUpgradeError,,,,,,This notification will be generated when upgrading fails. The hpnicfIDSTrapUpgradeType object describes upgrade type, including: programme, vrb. The hpnicfIDSTrapReasonForError object describes reason for error.
.1.3.6.1.4.1.11.2.14.11.15.2.47.1.1.2.0.9,HPN-ICF-IDS-MIB::hpnicfIDSTrapFileAccessError,,,,,,This notification will be generated when accessing file fails. The hpnicfIDSTrapFileName object describes the name of file accessed. The hpnicfIDSTrapReasonForError object describes reason for error.
.1.3.6.1.4.1.11.2.14.11.15.2.47.1.1.2.0.10,HPN-ICF-IDS-MIB::hpnicfIDSTrapConsArithMemLow,,,,,,This notification will be generated when memory used by constructing the arithmetic to seek content is lacking. The hpnicfIDSTrapReasonForError object describes reason for error.
.1.3.6.1.4.1.11.2.14.11.15.2.47.1.1.2.0.11,HPN-ICF-IDS-MIB::hpnicfIDSTrapSSRAMOperFail,,,,,,This notification will be generated when reading or writing SSRAM of CIE card fails. The hpnicfIDSTrapReasonForError object describes reason for error.
.1.3.6.1.4.1.11.2.14.11.15.2.47.1.1.2.0.12,HPN-ICF-IDS-MIB::hpnicfIDSTrapPacketProcessDisorder,,,,,,This notification will be generated when packets processed is in disorder. The hpnicfIDSTrapReasonForError object describes reason for error.
.1.3.6.1.4.1.11.2.14.11.15.2.47.1.1.2.0.13,HPN-ICF-IDS-MIB::hpnicfIDSTrapCfgFileFormatError,,,,,,When devices startup and load the configuration file, if format error is found, this notification will be generated. The hpnicfIDSTrapFileName object describes the name of configuration file. The hpnicfIDSTrapCfgLineInFile object describes the line number in the file.
.1.3.6.1.4.1.11.2.14.11.15.2.48,HPN-ICF-OID-MIB::hpnicfRcr,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.2.48.1,HPN-ICF-RCR-MIB::hpnicfRcrMR,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.2.48.1.1,HPN-ICF-RCR-MIB::hpnicfRcrMRGroup,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.2.48.1.1.1,HPN-ICF-RCR-MIB::hpnicfRcrMRAllMaxUsedBandRate,Integer32,read-write,,current,,The max used band rate of all external interfaces on member router-devices(MRs) which are controlled by RCR.
.1.3.6.1.4.1.11.2.14.11.15.2.48.1.1.2,HPN-ICF-RCR-MIB::hpnicfRcrMRAllMinUsedBandRate,Integer32,read-write,,current,,The min used band rate of all external interfaces on MRs which are controlled by RCR.
.1.3.6.1.4.1.11.2.14.11.15.2.48.1.1.3,HPN-ICF-RCR-MIB::hpnicfRcrMRListenTime,Integer32,read-write,,current,,The persistent time of a probe on member router-device(MR) which is controlled by RCR.
.1.3.6.1.4.1.11.2.14.11.15.2.48.1.2,HPN-ICF-RCR-MIB::hpnicfRcrMRStateTable,,not-accessible,,current,,This table contains state information of each MR which is controlled by RCR.
.1.3.6.1.4.1.11.2.14.11.15.2.48.1.2.1,HPN-ICF-RCR-MIB::hpnicfRcrMRStateEntry,,not-accessible,hpnicfRcrMRName,current,,Entry items
.1.3.6.1.4.1.11.2.14.11.15.2.48.1.2.1.1,HPN-ICF-RCR-MIB::hpnicfRcrMRName,OCTET,not-accessible,,current,,The name of MR which is controlled by RCR.
.1.3.6.1.4.1.11.2.14.11.15.2.48.1.2.1.2,HPN-ICF-RCR-MIB::hpnicfRcrMRState,INTEGER,read-only,,current,down(1):up(2):controlled(3),The state of MR where identified on the controller router-device(CR). down: The MR has been enabled but has not connected to the CR with TCP connection. up: The MR has already successfully connected to the CR but has not been ready for adjusting route. controlled: The MR has already passed the consultation with the CR and could be controlled by it.
.1.3.6.1.4.1.11.2.14.11.15.2.48.1.2.1.3,HPN-ICF-RCR-MIB::hpnicfRcrMRAuthType,INTEGER,read-write,,current,simple(1):md5(2),The authentication type of communication packet between CR and MR.
.1.3.6.1.4.1.11.2.14.11.15.2.48.1.2.1.4,HPN-ICF-RCR-MIB::hpnicfRcrMRAuthPwd,OCTET,read-write,,current,,The authentication password of communication packet between CR and MR. Reading this object always results in an OCTET STRING of length zero; authentication may not be bypassed by reading the MIB object.
.1.3.6.1.4.1.11.2.14.11.15.2.48.1.3,HPN-ICF-RCR-MIB::hpnicfRcrMROutIfStateTable,,not-accessible,,current,,This table contains the external interface states of each MR which is controlled by RCR.
.1.3.6.1.4.1.11.2.14.11.15.2.48.1.3.1,HPN-ICF-RCR-MIB::hpnicfRcrMROutIfStateEntry,,not-accessible,hpnicfRcrMRName:hpnicfRcrMROutIfName,current,,Entry items
.1.3.6.1.4.1.11.2.14.11.15.2.48.1.3.1.1,HPN-ICF-RCR-MIB::hpnicfRcrMROutIfName,OCTET,not-accessible,,current,,The name of external interface on each MR.
.1.3.6.1.4.1.11.2.14.11.15.2.48.1.3.1.2,HPN-ICF-RCR-MIB::hpnicfRcrMROutIfState,INTEGER,read-only,,current,down(1):up(2):notExist(3),The state of external interface on each MR.
.1.3.6.1.4.1.11.2.14.11.15.2.48.1.3.1.3,HPN-ICF-RCR-MIB::hpnicfRcrMROutIfMaxUsedBandRate,Integer32,read-write,,current,,The max spendable bandwidth rate on external interface.
.1.3.6.1.4.1.11.2.14.11.15.2.48.1.3.1.4,HPN-ICF-RCR-MIB::hpnicfRcrMROutIfMinUsedBandRate,Integer32,read-write,,current,,The min spendable bandwidth rate on external interface.
.1.3.6.1.4.1.11.2.14.11.15.2.48.1.3.1.5,HPN-ICF-RCR-MIB::hpnicfRcrMROutIfUsedBandRate,Integer32,read-only,,current,,The used bandwidth rate on external interface.
.1.3.6.1.4.1.11.2.14.11.15.2.48.2,HPN-ICF-RCR-MIB::hpnicfRcrCR,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.2.48.2.1,HPN-ICF-RCR-MIB::hpnicfRcrCRGroup,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.2.48.2.1.1,HPN-ICF-RCR-MIB::hpnicfRcrCRState,INTEGER,read-only,,current,down(1):init(2):active(3),The state of the CR which is controlled by RCR. down: The CR has been enabled but has not started a TCP connection server. init: The CR has started a TCP connection server and has been waiting for MR connection, but has not been ready for adjusting route. active: The CR is ready for adjusting route.
.1.3.6.1.4.1.11.2.14.11.15.2.48.2.1.2,HPN-ICF-RCR-MIB::hpnicfRcrCRPortNum,Integer32,read-write,,current,,The communication port number between CR and MR.
.1.3.6.1.4.1.11.2.14.11.15.2.48.2.1.3,HPN-ICF-RCR-MIB::hpnicfRcrCRCtrlMode,INTEGER,read-write,,current,control(1):observe(2),The observe mode or control mode is configured to operate in the CR. observe: The CR monitors prefixes and external interfaces based on default and user-defined policies and then reports the status of the network and the decisions that should be made but does not implement any changes. controlled: The CR monitors prefixes and external interfaces based on default and user-defined policies and then reports the status of the network and the decisions that should be made and implement any changes.
.1.3.6.1.4.1.11.2.14.11.15.2.48.2.1.4,HPN-ICF-RCR-MIB::hpnicfRcrCRChooseMode,INTEGER,read-write,,current,good(1):best(2),The algorithm used to choose an alternative external interface for a prefix. good: The first external interface that conforms to the policy is selected as the new external interface. best: Information is collected from all external interfaces and the best one is selected even though the best external interface may not be in-policy.
.1.3.6.1.4.1.11.2.14.11.15.2.48.2.1.5,HPN-ICF-RCR-MIB::hpnicfRcrCRKeepaliveTime,Integer32,read-write,,current,,The interval time of the transmission of the keepalive communication packet between CR and MR.
.1.3.6.1.4.1.11.2.14.11.15.2.48.2.1.6,HPN-ICF-RCR-MIB::hpnicfRcrCRPolicyMode,INTEGER,read-write,,current,prefix(1):operation(2):study(3),The chosen policy mode which decides to change what prefix. prefix: An RCR policy is designed to select IP prefixes or to select RCR learn policies using a match clause and then to apply RCR policy configurations using a set clause. operation: To deside to adjusted prefixes based on operation which user configured. study: To learn and optimize prefixes based on the highest throughput or the highest delay.
.1.3.6.1.4.1.11.2.14.11.15.2.48.2.1.7,HPN-ICF-RCR-MIB::hpnicfRcrCRStudyMode,INTEGER,read-write,,current,maxThoughout(1):maxDelay(2),The mode of collecting prefix in studying configuration mode. It's to collect either the prefix of max thoughtout or the prefix of max delay time. It doesn't have a value when CR isn't in studying configuration mode.
.1.3.6.1.4.1.11.2.14.11.15.2.48.2.1.8,HPN-ICF-RCR-MIB::hpnicfRcrCRStudyIpPrefixNum,Integer32,read-write,,current,,The max number of collecting prefix in studying configuration mode.
.1.3.6.1.4.1.11.2.14.11.15.2.48.2.1.9,HPN-ICF-RCR-MIB::hpnicfRcrCRIpPrefixLen,Integer32,read-write,,current,,The mask length of collecting prefix in configuration mode.
.1.3.6.1.4.1.11.2.14.11.15.2.48.2.2,HPN-ICF-RCR-MIB::hpnicfRcrCRRcrPolicyTable,,not-accessible,,current,,This table contains objects to get statistic information of interfaces on a device.
.1.3.6.1.4.1.11.2.14.11.15.2.48.2.2.1,HPN-ICF-RCR-MIB::hpnicfRcrCRRcrPolicyEntry,,not-accessible,hpnicfRcrCRRcrPlyID,current,,Entry items
.1.3.6.1.4.1.11.2.14.11.15.2.48.2.2.1.1,HPN-ICF-RCR-MIB::hpnicfRcrCRRcrPlyID,Integer32,not-accessible,,current,,The ID of RCR policy which the user has configured.
.1.3.6.1.4.1.11.2.14.11.15.2.48.2.2.1.2,HPN-ICF-RCR-MIB::hpnicfRcrCRRcrPlyMatchIPListName,OCTET,read-write,,current,,The matched IP prefix list name of RCR policy which the user has configured.
.1.3.6.1.4.1.11.2.14.11.15.2.48.2.2.1.3,HPN-ICF-RCR-MIB::hpnicfRcrCRRcrPlyMatchStudyEnable,INTEGER,read-write,,current,disable(1):enable(2),Whether the RCR policy which the user has configured is matched for studying prefix mode.
.1.3.6.1.4.1.11.2.14.11.15.2.48.2.2.1.4,HPN-ICF-RCR-MIB::hpnicfRcrCRRcrPlyMatchOperPlyName,OCTET,read-write,,current,,The matched operation policy name of RCR policy which the user has configured.
.1.3.6.1.4.1.11.2.14.11.15.2.48.2.2.1.5,HPN-ICF-RCR-MIB::hpnicfRcrCRRcrAclNumber,Integer32,read-write,,current,,The matched acl number of RCR operation policy which the user has configured.
.1.3.6.1.4.1.11.2.14.11.15.2.48.2.2.1.6,HPN-ICF-RCR-MIB::hpnicfRcrCRRcrPlyDelayTime,Integer32,read-write,,current,,The absolute maximum delay time. The range of values that can be configured is from 1 to 10000.
.1.3.6.1.4.1.11.2.14.11.15.2.48.2.2.1.7,HPN-ICF-RCR-MIB::hpnicfRcrCRRcrPlyLossRate,Integer32,read-write,,current,,The packet loss percent of prefix which the CR concerns.
.1.3.6.1.4.1.11.2.14.11.15.2.48.2.3,HPN-ICF-RCR-MIB::hpnicfRcrCRMatPrefixPerfTable,,not-accessible,,current,,This table contains the matched prefix performance information.
.1.3.6.1.4.1.11.2.14.11.15.2.48.2.3.1,HPN-ICF-RCR-MIB::hpnicfRcrCRMatPrefixPerfEntry,,not-accessible,hpnicfRcrCRMatPrefPerfAddrType:hpnicfRcrCRMatPrefPerfDestIPAddr:hpnicfRcrCRMatPrefPerfDestMaskLen,current,,Entry items
.1.3.6.1.4.1.11.2.14.11.15.2.48.2.3.1.1,HPN-ICF-RCR-MIB::hpnicfRcrCRMatPrefPerfAddrType,INTEGER,not-accessible,,current,unknown(0):ipv4(1):ipv6(2):ipv4z(3):ipv6z(4):dns(16),The destination IP addresses type of matched prefix which the CR wants (IPv4 or IPv6).
.1.3.6.1.4.1.11.2.14.11.15.2.48.2.3.1.2,HPN-ICF-RCR-MIB::hpnicfRcrCRMatPrefPerfDestIPAddr,OCTET,not-accessible,,current,,The destination IP address of matched prefix which the CR wants.
.1.3.6.1.4.1.11.2.14.11.15.2.48.2.3.1.3,HPN-ICF-RCR-MIB::hpnicfRcrCRMatPrefPerfDestMaskLen,Integer32,not-accessible,,current,,The destination IP address mask length of matched prefix which the CR wants.
.1.3.6.1.4.1.11.2.14.11.15.2.48.2.3.1.4,HPN-ICF-RCR-MIB::hpnicfRcrCRMatPrefPerfDelayTime,Integer32,read-only,,current,,The absolute maximum delay time of prefix which the CR has configured.
.1.3.6.1.4.1.11.2.14.11.15.2.48.2.3.1.5,HPN-ICF-RCR-MIB::hpnicfRcrCRMatPrefPerfLossRate,Integer32,read-only,,current,,The packet loss percent of prefix which the CR has configured.
.1.3.6.1.4.1.11.2.14.11.15.2.48.2.3.1.6,HPN-ICF-RCR-MIB::hpnicfRcrCRMatPrefPerfThroughput,Integer32,read-only,,current,,The bandwidth of prefix which the CR has monitored.
.1.3.6.1.4.1.11.2.14.11.15.2.48.2.4,HPN-ICF-RCR-MIB::hpnicfRcrCRAdjustPrefixTable,,not-accessible,,current,,This table contains objects to get adjusted prefix information which the CR controlled.
.1.3.6.1.4.1.11.2.14.11.15.2.48.2.4.1,HPN-ICF-RCR-MIB::hpnicfRcrCRAdjustPrefixEntry,,not-accessible,hpnicfRcrCRAdjuPrefDestAddrType:hpnicfRcrCRAdjuPrefDestAddr:hpnicfRcrCRAdjuPrefMaskLen:hpnicfRcrCRAdjuPrefPreMRName:hpnicfRcrCRAdjuPrefPreOutIfName,current,,Entry items
.1.3.6.1.4.1.11.2.14.11.15.2.48.2.4.1.1,HPN-ICF-RCR-MIB::hpnicfRcrCRAdjuPrefDestAddrType,INTEGER,not-accessible,,current,unknown(0):ipv4(1):ipv6(2):ipv4z(3):ipv6z(4):dns(16),The IP address type of the adjusted prefix which CR controlled (IPv4 or IPv6).
.1.3.6.1.4.1.11.2.14.11.15.2.48.2.4.1.2,HPN-ICF-RCR-MIB::hpnicfRcrCRAdjuPrefDestAddr,OCTET,not-accessible,,current,,The IP address of the adjusted prefix which CR controlled.
.1.3.6.1.4.1.11.2.14.11.15.2.48.2.4.1.3,HPN-ICF-RCR-MIB::hpnicfRcrCRAdjuPrefMaskLen,Integer32,not-accessible,,current,,The IP address mask length of the adjusted prefix which CR controlled.
.1.3.6.1.4.1.11.2.14.11.15.2.48.2.4.1.4,HPN-ICF-RCR-MIB::hpnicfRcrCRAdjuPrefPreMRName,OCTET,not-accessible,,current,,The name of the MR which the previous outbound traffic flows through.
.1.3.6.1.4.1.11.2.14.11.15.2.48.2.4.1.5,HPN-ICF-RCR-MIB::hpnicfRcrCRAdjuPrefPreOutIfName,OCTET,not-accessible,,current,,The name of the external interface on the MR which the previous outbound traffic flows through.
.1.3.6.1.4.1.11.2.14.11.15.2.48.2.4.1.6,HPN-ICF-RCR-MIB::hpnicfRcrCRAdjuPrefCurMRName,OCTET,read-only,,current,,The name of the MR which the current outbound traffic flows through.
.1.3.6.1.4.1.11.2.14.11.15.2.48.2.4.1.7,HPN-ICF-RCR-MIB::hpnicfRcrCRAdjuPrefCurOutIfName,OCTET,read-only,,current,,The name of the external interface on the MR which the current outbound traffic flows through.
.1.3.6.1.4.1.11.2.14.11.15.2.48.2.4.1.8,HPN-ICF-RCR-MIB::hpnicfRcrCRAdjuPrefPersistTime,Integer32,read-only,,current,,The persisting time from the time which the adjusted outbound traffic has been adjusted by CR to now.
.1.3.6.1.4.1.11.2.14.11.15.2.48.2.4.1.9,HPN-ICF-RCR-MIB::hpnicfRcrCRAdjuPrefAgeTime,Integer32,read-only,,current,,The time which the adjusted prefix remains.
.1.3.6.1.4.1.11.2.14.11.15.2.49,HPN-ICF-OID-MIB::hpnicfAtmDxi,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.2.49.1,HPN-ICF-ATM-DXI-MIB::hpnicfAtmDxiScalarGroup,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.2.49.1.1,HPN-ICF-ATM-DXI-MIB::hpnicfAtmDxiConfMode,INTEGER,read-only,,current,mode1a(1):mode1b(2):mode2(3),This node identifies the ATM-DXI mode being used at the ATM-DXI port.
.1.3.6.1.4.1.11.2.14.11.15.2.49.2,HPN-ICF-ATM-DXI-MIB::hpnicfAtmDxiIfObjects,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.2.49.2.1,HPN-ICF-ATM-DXI-MIB::hpnicfAtmDxiPvcTable,,not-accessible,,current,,This table describes information of PVC in ATM-DXI interface.
.1.3.6.1.4.1.11.2.14.11.15.2.49.2.1.1,HPN-ICF-ATM-DXI-MIB::hpnicfAtmDxiPvcEntry,,not-accessible,ifIndex:hpnicfAtmDxiPvcVpi:hpnicfAtmDxiPvcVci,current,,The entry of hpnicfAtmDxiPvcTable.
.1.3.6.1.4.1.11.2.14.11.15.2.49.2.1.1.1,HPN-ICF-ATM-DXI-MIB::hpnicfAtmDxiPvcVpi,Integer32,not-accessible,,current,,The value of VPI. It can't be 0 if hpnicfAtmDxiPvcVci is 0.
.1.3.6.1.4.1.11.2.14.11.15.2.49.2.1.1.2,HPN-ICF-ATM-DXI-MIB::hpnicfAtmDxiPvcVci,Integer32,not-accessible,,current,,The value of VCI. It can't be 0 if hpnicfAtmDxiPvcVpi is 0.
.1.3.6.1.4.1.11.2.14.11.15.2.49.2.1.1.3,HPN-ICF-ATM-DXI-MIB::hpnicfAtmDxiPvcDFA,Integer32,read-create,,current,,The index of PVC. It is equal with vci and VPI. And this node value is correlate with hpnicfAtmDxiPvcVpi and hpnicfAtmDxiPvcVci. 
.1.3.6.1.4.1.11.2.14.11.15.2.49.2.1.1.4,HPN-ICF-ATM-DXI-MIB::hpnicfAtmDxiPvcEncType,INTEGER,read-create,,current,snap(1):nlpid(2):mux(3),Encapsulation type of the frame.
.1.3.6.1.4.1.11.2.14.11.15.2.49.2.1.1.5,HPN-ICF-ATM-DXI-MIB::hpnicfAtmDxiPvcMapCount,Integer32,read-create,,current,,The number of map. One map can only associate with one PVC, but one PVC can associate with 32 maps. This node is the map count which one PVC associated with.
.1.3.6.1.4.1.11.2.14.11.15.2.49.2.1.1.6,HPN-ICF-ATM-DXI-MIB::hpnicfAtmDxiPvcRowStatus,INTEGER,read-create,,current,active(1):notInService(2):notReady(3):createAndGo(4):createAndWait(5):destroy(6),Only support 'destroy' 'createAndGo' and 'active'.
.1.3.6.1.4.1.11.2.14.11.15.2.49.2.2,HPN-ICF-ATM-DXI-MIB::hpnicfAtmDxiMapTable,,not-accessible,,current,,This table describes PVC map information.
.1.3.6.1.4.1.11.2.14.11.15.2.49.2.2.1,HPN-ICF-ATM-DXI-MIB::hpnicfAtmDxiMapEntry,,not-accessible,ifIndex:hpnicfAtmDxiMapPeerIpType:hpnicfAtmDxiMapPeerIp:hpnicfAtmDxiMapPvcVpi:hpnicfAtmDxiMapPvcVci:hpnicfAtmDxiMapType,current,,The entry of hpnicfAtmDxiMapTable.
.1.3.6.1.4.1.11.2.14.11.15.2.49.2.2.1.1,HPN-ICF-ATM-DXI-MIB::hpnicfAtmDxiMapPeerIpType,INTEGER,not-accessible,,current,unknown(0):ipv4(1):ipv6(2):ipv4z(3):ipv6z(4):dns(16),The type of ip address: IPv4 or IPv6.
.1.3.6.1.4.1.11.2.14.11.15.2.49.2.2.1.2,HPN-ICF-ATM-DXI-MIB::hpnicfAtmDxiMapPeerIp,OCTET,not-accessible,,current,,The peer ip address. This ip address is the peer ip address which the frame will arrive.
.1.3.6.1.4.1.11.2.14.11.15.2.49.2.2.1.3,HPN-ICF-ATM-DXI-MIB::hpnicfAtmDxiMapPvcVpi,Integer32,not-accessible,,current,,The VPI of PVC. It can't be 0 if hpnicfAtmDxiMapPvcVci is 0.
.1.3.6.1.4.1.11.2.14.11.15.2.49.2.2.1.4,HPN-ICF-ATM-DXI-MIB::hpnicfAtmDxiMapPvcVci,Integer32,not-accessible,,current,,The VCI of PVC. It can't be 0 if hpnicfAtmDxiMapPvcVpi is 0.
.1.3.6.1.4.1.11.2.14.11.15.2.49.2.2.1.5,HPN-ICF-ATM-DXI-MIB::hpnicfAtmDxiMapType,INTEGER,not-accessible,,current,address(1):inarp(2):default(3),Pvc map type.
.1.3.6.1.4.1.11.2.14.11.15.2.49.2.2.1.6,HPN-ICF-ATM-DXI-MIB::hpnicfAtmDxiMapInarpTime,Integer32,read-create,,current,,The interval time of inarp request. This node describes the interval time inarp request frame sent. If the hpnicfAtmDxiMapType isn't inarp, this value is 0. Its unit is minute.
.1.3.6.1.4.1.11.2.14.11.15.2.49.2.2.1.7,HPN-ICF-ATM-DXI-MIB::hpnicfAtmDxiMapBroEnable,INTEGER,read-create,,current,enable(1):disable(2),Whether ATM-DXI map enable broadcast or not.
.1.3.6.1.4.1.11.2.14.11.15.2.49.2.2.1.8,HPN-ICF-ATM-DXI-MIB::hpnicfAtmDxiMapRowStatus,INTEGER,read-create,,current,active(1):notInService(2):notReady(3):createAndGo(4):createAndWait(5):destroy(6),Only support 'destroy', 'createAndGo' and 'active'.
.1.3.6.1.4.1.11.2.14.11.15.2.49.3,HPN-ICF-ATM-DXI-MIB::hpnicfAtmDxiConformance,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.2.49.3.1,HPN-ICF-ATM-DXI-MIB::hpnicfAtmDxiCompliances,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.2.49.3.1.1,HPN-ICF-ATM-DXI-MIB::hpnicfAtmDxiCompliance,,,,,,The compliance statement.
.1.3.6.1.4.1.11.2.14.11.15.2.49.3.2,HPN-ICF-ATM-DXI-MIB::hpnicfAtmDxiGroup,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.2.49.3.2.1,HPN-ICF-ATM-DXI-MIB::hpnicfPVCMAPGroup,,,,,,This group includes nodes which are associated with interface.
.1.3.6.1.4.1.11.2.14.11.15.2.49.3.2.2,HPN-ICF-ATM-DXI-MIB::hpnicfAtmDxiGeneralGroup,,,,,,This group includes the general nodes about ATM-DXI.
.1.3.6.1.4.1.11.2.14.11.15.2.50,HPN-ICF-OID-MIB::hpnicfMulticast,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.2.50.1,HPN-ICF-MULTICAST-MIB::hpnicfMulticastObject,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.2.50.1.1,HPN-ICF-MULTICAST-MIB::hpnicfMulticastEnable,INTEGER,read-write,,current,enabled(1):disabled(2),To enable or disable global multicast.
.1.3.6.1.4.1.11.2.14.11.15.2.51,HPN-ICF-OID-MIB::hpnicfMpm,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.2.51.1,HPN-ICF-MPM-MIB::hpnicfMPMObject,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.2.51.1.1,HPN-ICF-MPM-MIB::hpnicfMPortGroupLimitMinNumber,Unsigned32,read-only,,current,,The lower limit of group-limit number.
.1.3.6.1.4.1.11.2.14.11.15.2.51.1.2,HPN-ICF-MPM-MIB::hpnicfMPortGroupLimitMaxNumber,Unsigned32,read-only,,current,,The upper limit of group-limit number.
.1.3.6.1.4.1.11.2.14.11.15.2.51.2,HPN-ICF-MPM-MIB::hpnicfMPMTable,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.2.51.2.1,HPN-ICF-MPM-MIB::hpnicfMPortGroupJoinTable,,not-accessible,,current,,A table which is used for configuring a port in a specified VLAN to join a multicast group.
.1.3.6.1.4.1.11.2.14.11.15.2.51.2.1.1,HPN-ICF-MPM-MIB::hpnicfMPortGroupJoinEntry,,not-accessible,ifIndex:hpnicfMPortGroupJoinVlanID:hpnicfMPortGroupJoinAddressType:hpnicfMPortGroupJoinAddress,current,,An entry which is used for configuring a port in a specified VLAN to join a multicast group.
.1.3.6.1.4.1.11.2.14.11.15.2.51.2.1.1.1,HPN-ICF-MPM-MIB::hpnicfMPortGroupJoinVlanID,Integer32,not-accessible,,current,,An index uniquely identifying a port in a specified VLAN which joined the multicast group.
.1.3.6.1.4.1.11.2.14.11.15.2.51.2.1.1.2,HPN-ICF-MPM-MIB::hpnicfMPortGroupJoinAddressType,INTEGER,not-accessible,,current,unknown(0):ipv4(1):ipv6(2):ipv4z(3):ipv6z(4):dns(16),Type of the multicast IP address.
.1.3.6.1.4.1.11.2.14.11.15.2.51.2.1.1.3,HPN-ICF-MPM-MIB::hpnicfMPortGroupJoinAddress,OCTET,not-accessible,,current,,IP address of the group which the port belongs to, and it must be a valid multicast IP address.
.1.3.6.1.4.1.11.2.14.11.15.2.51.2.1.1.4,HPN-ICF-MPM-MIB::hpnicfMPortGroupJoinStatus,INTEGER,read-create,,current,active(1):notInService(2):notReady(3):createAndGo(4):createAndWait(5):destroy(6),This object is responsible for managing the creation and deletion of rows, which supports 'active', 'notReady', 'createAndGo', 'destroy'. Until instances of all corresponding columns are appropriately configured, the value of the corresponding instance of the hpnicfMPortGroupJoinStatus column is 'notReady'. In particular, a newly created row cannot be actived until the port belongs to the corresponding VLAN and IGMP or IGMP snooping is enabled on that VLAN.
.1.3.6.1.4.1.11.2.14.11.15.2.51.2.2,HPN-ICF-MPM-MIB::hpnicfMPortGroupTable,,not-accessible,,current,,A table containing information about the status of a port which joined a multicast group in the VLAN.
.1.3.6.1.4.1.11.2.14.11.15.2.51.2.2.1,HPN-ICF-MPM-MIB::hpnicfMPortGroupEntry,,not-accessible,ifIndex:hpnicfMPortGroupVlanID:hpnicfMPortGroupAddressType:hpnicfMPortGroupAddress,current,,An entry containing information about the status of a port which joined a multicast group in the VLAN.
.1.3.6.1.4.1.11.2.14.11.15.2.51.2.2.1.1,HPN-ICF-MPM-MIB::hpnicfMPortGroupVlanID,Integer32,not-accessible,,current,,An index uniquely identifies that a port belongs to a specified VLAN.
.1.3.6.1.4.1.11.2.14.11.15.2.51.2.2.1.2,HPN-ICF-MPM-MIB::hpnicfMPortGroupAddressType,INTEGER,read-only,,current,unknown(0):ipv4(1):ipv6(2):ipv4z(3):ipv6z(4):dns(16),Type of multicast IP address.
.1.3.6.1.4.1.11.2.14.11.15.2.51.2.2.1.3,HPN-ICF-MPM-MIB::hpnicfMPortGroupAddress,OCTET,read-only,,current,,IP address of the group which the port joined, and it must be a valid multicast IP address.
.1.3.6.1.4.1.11.2.14.11.15.2.51.2.3,HPN-ICF-MPM-MIB::hpnicfMPortConfigTable,,not-accessible,,current,,A table configuring the fast leave status, group limit number and group policy parameter on a port in the specified VLAN.
.1.3.6.1.4.1.11.2.14.11.15.2.51.2.3.1,HPN-ICF-MPM-MIB::hpnicfMPortConfigEntry,,not-accessible,ifIndex:hpnicfMPortConfigVlanID,current,,An entry containing information about the fast leave status, group limit number and group policy parameter of a port in the specified VLAN.
.1.3.6.1.4.1.11.2.14.11.15.2.51.2.3.1.1,HPN-ICF-MPM-MIB::hpnicfMPortConfigVlanID,Integer32,not-accessible,,current,,The VLAN index.
.1.3.6.1.4.1.11.2.14.11.15.2.51.2.3.1.2,HPN-ICF-MPM-MIB::hpnicfMPortGroupLimitNumber,Unsigned32,read-create,,current,,The group limit number of the port.
.1.3.6.1.4.1.11.2.14.11.15.2.51.2.3.1.3,HPN-ICF-MPM-MIB::hpnicfMPortFastLeaveStatus,INTEGER,read-create,,current,enabled(1):disabled(2),The fast leave status of the port.
.1.3.6.1.4.1.11.2.14.11.15.2.51.2.3.1.4,HPN-ICF-MPM-MIB::hpnicfMPortGroupPolicyParameter,Integer32,read-create,,current,,The ACL number which is used as the group policy parameter of the port.
.1.3.6.1.4.1.11.2.14.11.15.2.51.2.3.1.5,HPN-ICF-MPM-MIB::hpnicfMPortConfigRowStatus,INTEGER,read-create,,current,active(1):notInService(2):notReady(3):createAndGo(4):createAndWait(5):destroy(6),The object is responsible for managing the creation and deletion of rows, which supports 'active', 'notReady', 'createAndGo' and 'destroy'.
.1.3.6.1.4.1.11.2.14.11.15.2.51.2.3.1.6,HPN-ICF-MPM-MIB::hpnicfMPortGroupLimitReplace,INTEGER,read-create,,current,enabled(1):disabled(2),This object is related to the object hpnicfMPortGroupLimitNumber. If the current IGMP group number is less than the value of hpnicfMPortGroupLimitNumber, any new IGMP group is permitted. If the current IGMP group number equals to the value of hpnicfMPortGroupLimitNumber and the value of this object is enabled, the group with the minimum multicast address will be replaced by the new group. If the current IGMP group number equals to the value of hpnicfMPortGroupLimitNumber and the value of this object is disabled, none of new group will be permitted.
.1.3.6.1.4.1.11.2.14.11.15.2.51.2.4,HPN-ICF-MPM-MIB::hpnicfHostStaticJoinTable,,not-accessible,,current,,A table used to configure a host on a port in a specified VLAN statically to join a multicast group.
.1.3.6.1.4.1.11.2.14.11.15.2.51.2.4.1,HPN-ICF-MPM-MIB::hpnicfHostStaticJoinEntry,,not-accessible,ifIndex:hpnicfHostStaticJoinVlanID:hpnicfHostStaticJoinAddressType:hpnicfHostStaticJoinAddress,current,,An entry used to configure a host on a port in a specified VLAN statically to join a multicast group.
.1.3.6.1.4.1.11.2.14.11.15.2.51.2.4.1.1,HPN-ICF-MPM-MIB::hpnicfHostStaticJoinVlanID,Integer32,not-accessible,,current,,An index uniquely identify the specified VLAN in which a host on a port statically joined the multicast group.
.1.3.6.1.4.1.11.2.14.11.15.2.51.2.4.1.2,HPN-ICF-MPM-MIB::hpnicfHostStaticJoinAddressType,INTEGER,not-accessible,,current,unknown(0):ipv4(1):ipv6(2):ipv4z(3):ipv6z(4):dns(16),Type of the multicast IP address.
.1.3.6.1.4.1.11.2.14.11.15.2.51.2.4.1.3,HPN-ICF-MPM-MIB::hpnicfHostStaticJoinAddress,OCTET,not-accessible,,current,,IP address of the group which the host belongs to, and it must be a valid multicast IP address.
.1.3.6.1.4.1.11.2.14.11.15.2.51.2.4.1.4,HPN-ICF-MPM-MIB::hpnicfHostStaticJoinStatus,INTEGER,read-create,,current,active(1):notInService(2):notReady(3):createAndGo(4):createAndWait(5):destroy(6),This object is responsible for managing rows, which supports 'active', 'createAndGo' and 'destroy'.
.1.3.6.1.4.1.11.2.14.11.15.2.52,HPN-ICF-OID-MIB::hpnicfOadp,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.2.53,HPN-ICF-OID-MIB::hpnicfTunnel,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.2.53.1,HPN-ICF-TUNNEL-MIB::hpnicfTunnelMIBObjects,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.2.53.1.1,HPN-ICF-TUNNEL-MIB::hpnicfTunnelTables,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.2.53.1.1.1,HPN-ICF-TUNNEL-MIB::hpnicfTunnelIfTable,,not-accessible,,current,,The (conceptual) table containing information on configured tunnels. 
.1.3.6.1.4.1.11.2.14.11.15.2.53.1.1.1.1,HPN-ICF-TUNNEL-MIB::hpnicfTunnelIfEntry,,not-accessible,ifIndex,current,,An entry (conceptual row) containing the information on a particular configured tunnel. 
.1.3.6.1.4.1.11.2.14.11.15.2.53.1.1.1.1.3,HPN-ICF-TUNNEL-MIB::hpnicfTunnelIfEncapsMethod,INTEGER,read-write,,current,other(1):direct(2):gre(3):minimal(4):l2tp(5):pptp(6):l2f(7):udp(8):atmp(9):msdp(10):sixToFour(11):sixOverFour(12):isatap(13):teredo(14):tunnelModeReserve(35):tunnelModeIPv4Gre(36):tunnelModeIPv6Gre(37):tunnelModeIPv4IPv4(38):tunnelModeIPv4IPv6Config(39):tunnelModeIPv4IPv6Auto(40):tunnelModeIPv4IPv66to4(41):tunnelModeIPv4IPv6Isatap(42):tunnelModeIPv6IPv4(43):tunnelModeIPv6IPv6(44):tunnelModeIPv4UdpDVPN(45):tunnelModeIPv4GreDVPN(46):tunnelModeIPv6UdpDVPN(47):tunnelModeIPv6GreDVPN(48):tunnelModeCrLsp(49):tunnelModeMax(50):tunnelModeIPv4UdpVxlan(51):tunnelModeIPv6UdpVxlan(52):tunnelModeIPv4NVGRE(53):tunnelModeIPv6NVGRE(54),The encapsulation method used by the tunnel. 
.1.3.6.1.4.1.11.2.14.11.15.2.53.1.1.1.1.4,HPN-ICF-TUNNEL-MIB::hpnicfTunnelIfHopLimit,Integer32,read-only,,current,,The IPv4 TTL or IPv6 Hop Limit to use in the outer IP header. A value of 0 indicates that the value is copied from the payload's header. 
.1.3.6.1.4.1.11.2.14.11.15.2.53.1.1.1.1.5,HPN-ICF-TUNNEL-MIB::hpnicfTunnelIfSecurity,INTEGER,read-only,,current,none(1):ipsec(2):other(3),The method used by the tunnel to secure the outer IP header. The value ipsec indicates that IPsec is used between the tunnel endpoints for authentication or encryption or both. More specific security-related information may be available in a MIB module for the security protocol in use. 
.1.3.6.1.4.1.11.2.14.11.15.2.53.1.1.1.1.6,HPN-ICF-TUNNEL-MIB::hpnicfTunnelIfTOS,Integer32,read-only,,current,,The method used to set the high 6 bits (the differentiated services codepoint) of the IPv4 TOS or IPv6 Traffic Class in the outer IP header. A value of -1 indicates that the bits are copied from the payload's header. A value of -2 indicates that a traffic conditioner is invoked and more information may be available in a traffic conditioner MIB module. A value between 0 and 63 inclusive indicates that the bit field is set to the indicated value. 
.1.3.6.1.4.1.11.2.14.11.15.2.53.1.1.1.1.7,HPN-ICF-TUNNEL-MIB::hpnicfTunnelIfFlowLabel,Integer32,read-only,,current,,The method used to set the IPv6 Flow Label value. This object need not be present in rows where hpnicfTunnelIfAddressType indicates the tunnel is not over IPv6. A value of -1 indicates that a traffic conditioner is invoked and more information may be available in a traffic conditioner MIB. Any other value indicates that the Flow Label field is set to the indicated value. 
.1.3.6.1.4.1.11.2.14.11.15.2.53.1.1.1.1.8,HPN-ICF-TUNNEL-MIB::hpnicfTunnelIfAddressType,INTEGER,read-write,,current,unknown(0):ipv4(1):ipv6(2):ipv4z(3):ipv6z(4):dns(16),The type of address in the corresponding hpnicfTunnelIfLocalInetAddress and hpnicfTunnelIfRemoteInetAddress objects. 
.1.3.6.1.4.1.11.2.14.11.15.2.53.1.1.1.1.9,HPN-ICF-TUNNEL-MIB::hpnicfTunnelIfLocalInetAddress,OCTET,read-write,,current,,The address of the local endpoint of the tunnel (i.e., the source address used in the outer IP header). If the address is unknown, the value is 0.0.0.0 for IPv4 or :: for IPv6. The type of this object is given by hpnicfTunnelIfAddressType. 
.1.3.6.1.4.1.11.2.14.11.15.2.53.1.1.1.1.10,HPN-ICF-TUNNEL-MIB::hpnicfTunnelIfRemoteInetAddress,OCTET,read-write,,current,,The address of the remote endpoint of the tunnel (i.e., the destination address used in the outer IP header). If the address is unknown or the tunnel is not a point-to-point link (e.g., if it is a 6to4 tunnel), the value is 0.0.0.0 for tunnels over IPv4 or :: for tunnels over IPv6. The type of this object is given by hpnicfTunnelIfAddressType. 
.1.3.6.1.4.1.11.2.14.11.15.2.53.1.1.1.1.11,HPN-ICF-TUNNEL-MIB::hpnicfTunnelIfEncapsLimit,Integer32,read-only,,current,,The maximum number of additional encapsulations permitted for packets undergoing encapsulation at this node. A value of -1 indicates that no limit is present (except as a result of the packet size). 
.1.3.6.1.4.1.11.2.14.11.15.2.53.1.1.3,HPN-ICF-TUNNEL-MIB::hpnicfTunnelInetConfigTable,,not-accessible,,current,,The (conceptual) table containing information on configured tunnels. This table can be used to map a set of tunnel endpoints to the associated ifIndex value. It can also be used for row creation. Note that every row in the hpnicfTunnelIfTable with a fixed destination address should have a corresponding row in the hpnicfTunnelInetConfigTable, regardless of whether it was created via SNMP. 
.1.3.6.1.4.1.11.2.14.11.15.2.53.1.1.3.1,HPN-ICF-TUNNEL-MIB::hpnicfTunnelInetConfigEntry,,not-accessible,hpnicfTunnelInetConfigSlot:hpnicfTunnelInetConfigSubSlot:hpnicfTunnelInetConfigTunnNum,current,,An entry (conceptual row) containing the information on a particular configured tunnel. 
.1.3.6.1.4.1.11.2.14.11.15.2.53.1.1.3.1.1,HPN-ICF-TUNNEL-MIB::hpnicfTunnelInetConfigSlot,Integer32,not-accessible,,current,,Slot number. hpnicfTunnelInetConfigSlot, hpnicfTunnelInetConfigSubSlot and hpnicfTunnelInetConfigTunnNum describe a tunnel interface. For Example, interface tunnel 0/0/25 would be configured as: hpnicfTunnelInetConfigSlot 0 hpnicfTunnelInetConfigSubSlot 0 hpnicfTunnelInetConfigTunnNum 25 
.1.3.6.1.4.1.11.2.14.11.15.2.53.1.1.3.1.2,HPN-ICF-TUNNEL-MIB::hpnicfTunnelInetConfigSubSlot,Integer32,not-accessible,,current,,Sub slot number. As described in hpnicfTunnelInetConfigSlot's description. 
.1.3.6.1.4.1.11.2.14.11.15.2.53.1.1.3.1.3,HPN-ICF-TUNNEL-MIB::hpnicfTunnelInetConfigTunnNum,Integer32,not-accessible,,current,,Tunnel number. As described in hpnicfTunnelInetConfigSlot's description. 
.1.3.6.1.4.1.11.2.14.11.15.2.53.1.1.3.1.6,HPN-ICF-TUNNEL-MIB::hpnicfTunnelInetConfigIfIndex,Integer32,read-only,,current,,If the value of hpnicfTunnelInetConfigStatus for this row is active, then this object contains the value of ifIndex corresponding to the tunnel interface. A value of 0 is not legal in the active state, and means that the interface index has not yet been assigned. 
.1.3.6.1.4.1.11.2.14.11.15.2.53.1.1.3.1.7,HPN-ICF-TUNNEL-MIB::hpnicfTunnelInetConfigStatus,INTEGER,read-create,,current,active(1):notInService(2):notReady(3):createAndGo(4):createAndWait(5):destroy(6),The status of this row, by which new entries may be created, or old entries deleted from this table. The agent need not support setting this object to createAndWait or notInService since there are no other writable objects in this table, and writable objects in rows of corresponding tables such as the hpnicfTunnelIfTable may be modified while this row is active. To create a row in this table, the management station should set hpnicfTunnelInetConfigSlot, hpnicfTunnelInetConfigSubSlot, hpnicfTunnelInetConfigTunnNum, and set hpnicfTunnelInetConfigStatus to createAndGo. Creating a row in this table will cause an interface index to be assigned by the agent in an implementation-dependent manner, and corresponding rows will be instantiated in the ifTable and the hpnicfTunnelIfTable. The status of this row will become active as soon as the agent assigns the interface index, regardless of whether the interface is operationally up. Deleting a row in this table will likewise delete the corresponding row in the ifTable and in the hpnicfTunnelIfTable. 
.1.3.6.1.4.1.11.2.14.11.15.2.53.1.1.4,HPN-ICF-TUNNEL-MIB::hpnicfTunnelEviTable,,not-accessible,,current,,The (conceptual) table containing information on configured EVI-Tunnel. 
.1.3.6.1.4.1.11.2.14.11.15.2.53.1.1.4.1,HPN-ICF-TUNNEL-MIB::hpnicfTunnelEviEntry,,not-accessible,hpnicfTunnelEviTunnNum,current,,An entry (conceptual row) containing the information on a particular configured EVI-Tunnel. 
.1.3.6.1.4.1.11.2.14.11.15.2.53.1.1.4.1.1,HPN-ICF-TUNNEL-MIB::hpnicfTunnelEviTunnNum,Integer32,not-accessible,,current,,Tunnel number. An identifier used to distinguish between multiple tunnels. 
.1.3.6.1.4.1.11.2.14.11.15.2.53.1.1.4.1.2,HPN-ICF-TUNNEL-MIB::hpnicfTunnelEviIfIndex,Integer32,read-only,,current,,A unique value, greater than zero, for each interface. It is recommended that values are assigned contiguously starting from 1. The value for each interface sub-layer must remain constant at least from one re-initialization of the entity's network management system to the next re-initialization. 
.1.3.6.1.4.1.11.2.14.11.15.2.53.1.1.4.1.3,HPN-ICF-TUNNEL-MIB::hpnicfTunnelEviStatus,INTEGER,read-create,,current,active(1):notInService(2):notReady(3):createAndGo(4):createAndWait(5):destroy(6),The status of this row, by which new entries may be created, or old entries deleted from this table. The agent need not support setting this object to createAndWait or notInService since there are no other writable objects in this table, and writable objects in rows of corresponding tables such as the hpnicfTunnelEviTable may be modified while this row is active. Creating a row in this table will cause an interface index to be assigned by the agent in an implementation-dependent manner, and corresponding rows will be instantiated in the ifTable. The status of this row will become active as soon as the agent assigns the interface index, regardless of whether the interface is operationally up. Deleting a row in this table will likewise delete the corresponding row in the ifTable. 
.1.3.6.1.4.1.11.2.14.11.15.2.53.1.1.4.1.4,HPN-ICF-TUNNEL-MIB::hpnicfTunnelEviAddressType,INTEGER,read-create,,current,unknown(0):ipv4(1):ipv6(2):ipv4z(3):ipv6z(4):dns(16),The type of address in the corresponding hpnicfTunnelEviLocalAddr objects. Can not be modified after creation. 
.1.3.6.1.4.1.11.2.14.11.15.2.53.1.1.4.1.5,HPN-ICF-TUNNEL-MIB::hpnicfTunnelEviLocalAddr,OCTET,read-create,,current,,The address of the local endpoint of the tunnel (i.e., the source address used in the outer IP header). The type of this object is given by hpnicfTunnelEviAddressType. 
.1.3.6.1.4.1.11.2.14.11.15.2.53.1.1.4.1.6,HPN-ICF-TUNNEL-MIB::hpnicfTunnelEviNetworkID,Integer32,read-create,,current,,The method used to assign a network ID to an EVI-Tunnel interface. Assign the same network ID to the EVI-Tunnel interfaces of all edge devices in an EVI network. A value of 0 indicates that no network ID is assigned to any EVI-Tunnel interface. 
.1.3.6.1.4.1.11.2.14.11.15.2.53.1.1.4.1.7,HPN-ICF-TUNNEL-MIB::hpnicfTunnelEviKeepaliveInterval,Integer32,read-create,,current,,The method used to assign the keepalive interval. 
.1.3.6.1.4.1.11.2.14.11.15.2.53.1.1.4.1.8,HPN-ICF-TUNNEL-MIB::hpnicfTunnelEviKeepaliveTimes,Integer32,read-create,,current,,The method used to assign the keepalive maximum number of consecutive keepalive failures that are allowed. 
.1.3.6.1.4.1.11.2.14.11.15.2.53.1.1.5,HPN-ICF-TUNNEL-MIB::hpnicfTunnelEviLinkTable,,not-accessible,,current,,The (conceptual) table containing information on configured EVI-Link. 
.1.3.6.1.4.1.11.2.14.11.15.2.53.1.1.5.1,HPN-ICF-TUNNEL-MIB::hpnicfTunnelEviLinkEntry,,not-accessible,hpnicfTunnelEviTunnNum:hpnicfTunnelEviLinkNum,current,,An entry (conceptual row) containing the information on a particular configured EVI-Link. 
.1.3.6.1.4.1.11.2.14.11.15.2.53.1.1.5.1.1,HPN-ICF-TUNNEL-MIB::hpnicfTunnelEviLinkNum,Integer32,not-accessible,,current,,EVI-Link number. 
.1.3.6.1.4.1.11.2.14.11.15.2.53.1.1.5.1.2,HPN-ICF-TUNNEL-MIB::hpnicfTunnelEviLinkIfIndex,Integer32,read-only,,current,,A unique value, greater than zero, for each interface. It is recommended that values are assigned contiguously starting from 1. The value for each interface sub-layer must remain constant at least from one re-initialization of the entity's network management system to the next re-initialization. 
.1.3.6.1.4.1.11.2.14.11.15.2.53.1.1.5.1.3,HPN-ICF-TUNNEL-MIB::hpnicfTunnelEviLinkAddressType,INTEGER,read-only,,current,unknown(0):ipv4(1):ipv6(2):ipv4z(3):ipv6z(4):dns(16),The type of address in the corresponding hpnicfTunnelEviLinkRemoteAddr objects. Can not be modified after creation. 
.1.3.6.1.4.1.11.2.14.11.15.2.53.1.1.5.1.4,HPN-ICF-TUNNEL-MIB::hpnicfTunnelEviLinkRemoteAddr,OCTET,read-only,,current,,The address of the remote endpoint of the tunnel (i.e., the destination address used in the outer IP header). 
.1.3.6.1.4.1.11.2.14.11.15.2.53.1.1.6,HPN-ICF-TUNNEL-MIB::hpnicfTunnelGreTable,,not-accessible,,current,,The (conceptual) table containing information on configured Gre-Tunnel. 
.1.3.6.1.4.1.11.2.14.11.15.2.53.1.1.6.1,HPN-ICF-TUNNEL-MIB::hpnicfTunnelGreEntry,,not-accessible,hpnicfTunnelGreTunnNum,current,,An entry (conceptual row) containing the information on a particular configured Gre-Tunnel. 
.1.3.6.1.4.1.11.2.14.11.15.2.53.1.1.6.1.1,HPN-ICF-TUNNEL-MIB::hpnicfTunnelGreTunnNum,Integer32,not-accessible,,current,,Tunnel number. An identifier used to distinguish between multiple tunnels. 
.1.3.6.1.4.1.11.2.14.11.15.2.53.1.1.6.1.2,HPN-ICF-TUNNEL-MIB::hpnicfTunnelGreTunnIfIndex,Integer32,read-only,,current,,A unique value, greater than zero, for each interface. It is recommended that values are assigned contiguously starting from 1. The value for each interface sub-layer must remain constant at least from one re-initialization of the entity's network management system to the next re-initialization. 
.1.3.6.1.4.1.11.2.14.11.15.2.53.1.1.6.1.3,HPN-ICF-TUNNEL-MIB::hpnicfTunnelGreAddressType,INTEGER,read-create,,current,unknown(0):ipv4(1):ipv6(2):ipv4z(3):ipv6z(4):dns(16),The type of address in the corresponding hpnicfTunnelGreLocalAddr and hpnicfTunnelGreRemoteAddr objects. 
.1.3.6.1.4.1.11.2.14.11.15.2.53.1.1.6.1.4,HPN-ICF-TUNNEL-MIB::hpnicfTunnelGreLocalAddr,OCTET,read-create,,current,,The address of the local endpoint of the tunnel (i.e., the source address used in the outer IP header). 
.1.3.6.1.4.1.11.2.14.11.15.2.53.1.1.6.1.5,HPN-ICF-TUNNEL-MIB::hpnicfTunnelGreRemoteAddr,OCTET,read-create,,current,,The address of the remote endpoint of the tunnel (i.e., the destination address used in the outer IP header). 
.1.3.6.1.4.1.11.2.14.11.15.2.53.1.1.6.1.6,HPN-ICF-TUNNEL-MIB::hpnicfTunnelGreKeepaliveEnabled,INTEGER,read-create,,current,true(1):false(2),This MIB object specifies whether or not keepalive is used. A value of true indicates that keepalive SHOULD be used. When keepalive is not be used, the value of hpnicfTunnelGreKeepaliveInterval and hpnicfTunnelGreKeepaliveTimes MUST be zero. 
.1.3.6.1.4.1.11.2.14.11.15.2.53.1.1.6.1.7,HPN-ICF-TUNNEL-MIB::hpnicfTunnelGreKeepaliveInterval,Integer32,read-create,,current,,The method used to assign the keepalive interval. The value is zero when keepalive is not used. The valid value is from 1 to 32767, when keepalive is used. 
.1.3.6.1.4.1.11.2.14.11.15.2.53.1.1.6.1.8,HPN-ICF-TUNNEL-MIB::hpnicfTunnelGreKeepaliveTimes,Integer32,read-create,,current,,The method used to assign the keepalive maximum number of consecutive keepalive failures that are allowed. The value is zero when keepalive is not used. The valid value is from 1 to 255, when keepalive is used. 
.1.3.6.1.4.1.11.2.14.11.15.2.53.1.1.6.1.9,HPN-ICF-TUNNEL-MIB::hpnicfTunnelGreSlbgGroupNum,Unsigned32,read-create,,current,,The method used to assign the service-loopback-group. 
.1.3.6.1.4.1.11.2.14.11.15.2.53.1.1.6.1.10,HPN-ICF-TUNNEL-MIB::hpnicfTunnelGreTunnStatus,INTEGER,read-create,,current,active(1):notInService(2):notReady(3):createAndGo(4):createAndWait(5):destroy(6),The status of this row, by which new entries may be created, or old entries deleted from this table. The agent need not support setting this object to createAndWait or notInService since there are no other writable objects in this table, and writable objects in rows of corresponding tables such as the hpnicfTunnelGreTable may be modified while this row is active. Creating a row in this table will cause an interface index to be assigned by the agent in an implementation-dependent manner, and corresponding rows will be instantiated in the ifTable. The status of this row will become active as soon as the agent assigns the interface index, regardless of whether the interface is operationally up. Deleting a row in this table will likewise delete the corresponding row in the ifTable. 
.1.3.6.1.4.1.11.2.14.11.15.2.53.1.1.7,HPN-ICF-TUNNEL-MIB::hpnicfTunnelVxlanIfTable,,not-accessible,,current,,The (conceptual) table containing information on configured Vxlan-Tunnel. 
.1.3.6.1.4.1.11.2.14.11.15.2.53.1.1.7.1,HPN-ICF-TUNNEL-MIB::hpnicfTunnelVxlanIfEntry,,not-accessible,hpnicfTunnelVxlanIfTunnNum,current,,An entry (conceptual row) containing the information on a particular configured Vxlan-Tunnel. 
.1.3.6.1.4.1.11.2.14.11.15.2.53.1.1.7.1.1,HPN-ICF-TUNNEL-MIB::hpnicfTunnelVxlanIfTunnNum,Integer32,not-accessible,,current,,Tunnel number. An identifier used to distinguish between multiple tunnels. 
.1.3.6.1.4.1.11.2.14.11.15.2.53.1.1.7.1.2,HPN-ICF-TUNNEL-MIB::hpnicfTunnelVxlanTunnIfIndex,Integer32,read-only,,current,,A unique value, greater than zero, for each interface. It is recommended that values are assigned contiguously starting from 1. The value for each interface sub-layer must remain constant at least from one re-initialization of the entity's network management system to the next re-initialization. 
.1.3.6.1.4.1.11.2.14.11.15.2.53.1.1.7.1.3,HPN-ICF-TUNNEL-MIB::hpnicfTunnelVxlanIfAddressType,INTEGER,read-create,,current,unknown(0):ipv4(1):ipv6(2):ipv4z(3):ipv6z(4):dns(16),The type of address in the corresponding hpnicfTunnelVxlanIfLocalAddr and hpnicfTunnelVxlanIfRemoteAddr objects. 
.1.3.6.1.4.1.11.2.14.11.15.2.53.1.1.7.1.4,HPN-ICF-TUNNEL-MIB::hpnicfTunnelVxlanIfLocalAddr,OCTET,read-create,,current,,The address of the local endpoint of the tunnel (i.e., the source address used in the outer IP header). 
.1.3.6.1.4.1.11.2.14.11.15.2.53.1.1.7.1.5,HPN-ICF-TUNNEL-MIB::hpnicfTunnelVxlanIfRemoteAddr,OCTET,read-create,,current,,The address of the remote endpoint of the tunnel (i.e., the destination address used in the outer IP header). 
.1.3.6.1.4.1.11.2.14.11.15.2.53.1.1.7.1.6,HPN-ICF-TUNNEL-MIB::hpnicfTunnelVxlanIfStatus,INTEGER,read-create,,current,active(1):notInService(2):notReady(3):createAndGo(4):createAndWait(5):destroy(6),The status of this row, by which new entries may be created, or old entries deleted from this table. The agent need not support setting this object to createAndWait or notInService since there are no other writable objects in this table, and writable objects in rows of corresponding tables such as the hpnicfTunnelVxlanIfTable may be modified while this row is active. Creating a row in this table will cause an interface index to be assigned by the agent in an implementation-dependent manner, and corresponding rows will be instantiated in the ifTable. The status of this row will become active as soon as the agent assigns the interface index, regardless of whether the interface is operationally up. Deleting a row in this table will likewise delete the corresponding row in the ifTable. 
.1.3.6.1.4.1.11.2.14.11.15.2.53.1.1.8,HPN-ICF-TUNNEL-MIB::hpnicfTunnelVxlanConfigGroup,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.2.53.1.1.8.1,HPN-ICF-TUNNEL-MIB::hpnicfTunnelVxlanUdpPort,Integer32,read-write,,current,,The UDP port number for Vxlan Tunnels.
.1.3.6.1.4.1.11.2.14.11.15.2.53.1.1.8.2,HPN-ICF-TUNNEL-MIB::hpnicfTunnelVxlanDropWrongCksmPkt,INTEGER,read-write,,current,true(1):false(2),Whether or not dropping invalid UDP chesksum Vxlan packet.
.1.3.6.1.4.1.11.2.14.11.15.2.53.1.1.8.3,HPN-ICF-TUNNEL-MIB::hpnicfTunnelVxlanDropVlanTagPkt,INTEGER,read-write,,current,true(1):false(2),Whether or not dropping Vxlan packet with inner VLAN tag.
.1.3.6.1.4.1.11.2.14.11.15.2.53.1.1.9,HPN-ICF-TUNNEL-MIB::hpnicfTunnelAvailableIDGroup,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.2.53.1.1.9.1,HPN-ICF-TUNNEL-MIB::hpnicfTunnelAvailableID,Integer32,read-only,,current,,The available tunnel ID. A value of -1 indicates that there is no available tunnel ID.
.1.3.6.1.4.1.11.2.14.11.15.2.53.1.1.10,HPN-ICF-TUNNEL-MIB::hpnicfTunnelTotalNumTable,,not-accessible,,current,,Total number of a particular method tunnel.
.1.3.6.1.4.1.11.2.14.11.15.2.53.1.1.10.1,HPN-ICF-TUNNEL-MIB::hpnicfTunnelTotalNumEntry,,not-accessible,hpnicfTunnelEncapsMethod,current,,Total number of a particular method tunnel.
.1.3.6.1.4.1.11.2.14.11.15.2.53.1.1.10.1.1,HPN-ICF-TUNNEL-MIB::hpnicfTunnelEncapsMethod,INTEGER,not-accessible,,current,other(1):direct(2):gre(3):minimal(4):l2tp(5):pptp(6):l2f(7):udp(8):atmp(9):msdp(10):sixToFour(11):sixOverFour(12):isatap(13):teredo(14):tunnelModeReserve(35):tunnelModeIPv4Gre(36):tunnelModeIPv6Gre(37):tunnelModeIPv4IPv4(38):tunnelModeIPv4IPv6Config(39):tunnelModeIPv4IPv6Auto(40):tunnelModeIPv4IPv66to4(41):tunnelModeIPv4IPv6Isatap(42):tunnelModeIPv6IPv4(43):tunnelModeIPv6IPv6(44):tunnelModeIPv4UdpDVPN(45):tunnelModeIPv4GreDVPN(46):tunnelModeIPv6UdpDVPN(47):tunnelModeIPv6GreDVPN(48):tunnelModeCrLsp(49):tunnelModeMax(50):tunnelModeIPv4UdpVxlan(51):tunnelModeIPv6UdpVxlan(52):tunnelModeIPv4NVGRE(53):tunnelModeIPv6NVGRE(54),The encapsulation method used by the tunnel.
.1.3.6.1.4.1.11.2.14.11.15.2.53.1.1.10.1.2,HPN-ICF-TUNNEL-MIB::hpnicfTunnelTotalNum,Unsigned32,read-only,,current,,Total number of a particular method tunnel. 
.1.3.6.1.4.1.11.2.14.11.15.2.53.1.1.11,HPN-ICF-TUNNEL-MIB::hpnicfTunnelNvgreIfTable,,not-accessible,,current,,The (conceptual) table containing information on configured Nvgre-Tunnel. 
.1.3.6.1.4.1.11.2.14.11.15.2.53.1.1.11.1,HPN-ICF-TUNNEL-MIB::hpnicfTunnelNvgreIfEntry,,not-accessible,hpnicfTunnelNvgreIfTunnNum,current,,An entry (conceptual row) containing the information on a particular configured Nvgre-Tunnel. 
.1.3.6.1.4.1.11.2.14.11.15.2.53.1.1.11.1.1,HPN-ICF-TUNNEL-MIB::hpnicfTunnelNvgreIfTunnNum,Integer32,not-accessible,,current,,Tunnel number. An identifier used to distinguish between multiple tunnels. 
.1.3.6.1.4.1.11.2.14.11.15.2.53.1.1.11.1.2,HPN-ICF-TUNNEL-MIB::hpnicfTunnelNvgreTunnIfIndex,Integer32,read-only,,current,,A unique value, greater than zero, for each interface. It is recommended that values are assigned contiguously starting from 1. The value for each interface sub-layer must remain constant at least from one re-initialization of the entity's network management system to the next re-initialization. 
.1.3.6.1.4.1.11.2.14.11.15.2.53.1.1.11.1.3,HPN-ICF-TUNNEL-MIB::hpnicfTunnelNvgreIfAddressType,INTEGER,read-create,,current,unknown(0):ipv4(1):ipv6(2):ipv4z(3):ipv6z(4):dns(16),The type of address in the corresponding hpnicfTunnelNvgreIfLocalAddr and hpnicfTunnelNvgreIfRemoteAddr objects. 
.1.3.6.1.4.1.11.2.14.11.15.2.53.1.1.11.1.4,HPN-ICF-TUNNEL-MIB::hpnicfTunnelNvgreIfLocalAddr,OCTET,read-create,,current,,The address of the local endpoint of the tunnel (i.e., the source address used in the outer IP header). 
.1.3.6.1.4.1.11.2.14.11.15.2.53.1.1.11.1.5,HPN-ICF-TUNNEL-MIB::hpnicfTunnelNvgreIfRemoteAddr,OCTET,read-create,,current,,The address of the remote endpoint of the tunnel (i.e., the destination address used in the outer IP header). 
.1.3.6.1.4.1.11.2.14.11.15.2.53.1.1.11.1.6,HPN-ICF-TUNNEL-MIB::hpnicfTunnelNvgreIfStatus,INTEGER,read-create,,current,active(1):notInService(2):notReady(3):createAndGo(4):createAndWait(5):destroy(6),The status of this row, by which new entries may be created, or old entries deleted from this table. The agent need not support setting this object to createAndWait or notInService since there are no other writable objects in this table, and writable objects in rows of corresponding tables such as the hpnicfTunnelNvgreIfTable may be modified while this row is active. Creating a row in this table will cause an interface index to be assigned by the agent in an implementation-dependent manner, and corresponding rows will be instantiated in the ifTable. The status of this row will become active as soon as the agent assigns the interface index, regardless of whether the interface is operationally up. Deleting a row in this table will likewise delete the corresponding row in the ifTable. 
.1.3.6.1.4.1.11.2.14.11.15.2.54,HPN-ICF-OID-MIB::hpnicfGre,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.2.54.1,HPN-ICF-GRE-MIB::hpnicfGreObjects,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.2.54.1.1,HPN-ICF-GRE-MIB::hpnicfGreTable,,not-accessible,,current,,A table of Generic Routing Encapsulation(GRE) configuration.  It contains configuration of GRE Key, and enable flags of Key and Checksum. The detail of Key and Checksum is described in RFC2784 and RFC2890. 
.1.3.6.1.4.1.11.2.14.11.15.2.54.1.1.1,HPN-ICF-GRE-MIB::hpnicfGreEntry,,not-accessible,ifIndex,current,,The entry of hpnicfGreTable 
.1.3.6.1.4.1.11.2.14.11.15.2.54.1.1.1.1,HPN-ICF-GRE-MIB::hpnicfGreKeyValue,Unsigned32,read-write,,current,,The value of GRE key 
.1.3.6.1.4.1.11.2.14.11.15.2.54.1.1.1.2,HPN-ICF-GRE-MIB::hpnicfGreKey,INTEGER,read-write,,current,enable(1):disable(2),The enable flag of GRE key 
.1.3.6.1.4.1.11.2.14.11.15.2.54.1.1.1.3,HPN-ICF-GRE-MIB::hpnicfGreChecksum,INTEGER,read-write,,current,enable(1):disable(2),The enable flag of GRE Checksum 
.1.3.6.1.4.1.11.2.14.11.15.2.55,HPN-ICF-OID-MIB::hpnicfObjectInfo,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.2.55.1,HPN-ICF-OBJECT-INFO-MIB::hpnicfObjectInformation,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.2.55.1.1,HPN-ICF-OBJECT-INFO-MIB::hpnicfObjectInfoTable,,not-accessible,,current,, MIB objects information query table. 
.1.3.6.1.4.1.11.2.14.11.15.2.55.1.1.1,HPN-ICF-OBJECT-INFO-MIB::hpnicfObjectInfoEntry,,not-accessible,hpnicfObjectInfoOID:hpnicfObjectInfoType:hpnicfObjectInfoTypeExtension,current,,  The entry of hpnicfObjectInfoTable.  
.1.3.6.1.4.1.11.2.14.11.15.2.55.1.1.1.1,HPN-ICF-OBJECT-INFO-MIB::hpnicfObjectInfoOID,OBJECT,not-accessible,,current,,  The OID of the MIB object which is queried.  If the user has no privilege accessing to the object referred by this OID,  get operation on hpnicfObjectInfoValue will be failed. 
.1.3.6.1.4.1.11.2.14.11.15.2.55.1.1.1.2,HPN-ICF-OBJECT-INFO-MIB::hpnicfObjectInfoType,INTEGER,not-accessible,,current,reserved(1):accessType(2):dataType(3):dataRange(4):dataLength(5), The object's properties type to be queried.  The queried result will be returned by hpnicfObjectInfoValue. The format of the result will be different according to different hpnicfObjectInfoType. 
.1.3.6.1.4.1.11.2.14.11.15.2.55.1.1.1.3,HPN-ICF-OBJECT-INFO-MIB::hpnicfObjectInfoTypeExtension,OCTET,not-accessible,,current,, The object's property type extension to be queried.  This object's value is relative to the value of hpnicfObjectInfoType. 
.1.3.6.1.4.1.11.2.14.11.15.2.55.1.1.1.4,HPN-ICF-OBJECT-INFO-MIB::hpnicfObjectInfoValue,OCTET,read-only,,current,, Return property value of the queried object.  Zero length string is the default value of this object which means no value is returned.  If the request is invalid, then the result should be the default value.   If the value of hpnicfObjectInfoType is accessType, the rules below should be followed.  1) The returned value must have prefix 'A', and followed by some nonnegative integers. The format is like 'A2'. 2) The nonnegative integers and the meaning of them are as follow: 0 means 'not-accessible'. 1 means 'notification'. 2 means 'read-only'. 3 means 'read-write'. 4 means 'read-create'. 5 means 'write-only'. 6 means 'accessible-for-notify'. 7 means 'error'. --the above values are defined by standard protocol  101 means 'not implemented'. -- The queried node is not implemented by agent. 102 means 'unknown error'. -- Query failed for unknown reason.  If the value of hpnicfObjectInfoType is dataType, the rules below should be followed.  1) The returned value must have prefix 'T', and followed by string which has format like 2), such as 'T1', the character '1' means INTEGER.  2) The following data types are defined in standard protocol, the values in brackets  will be returned to indicate these data types. INTEGER(1) Integer32(2) Unsigned32(4) Gauge(6) Counter(7) Counter32(8) Counter64(9) TimeTicks(10) OCTET STRING(11) OBJECT IDENTIFIER(12) IpAddress(13) NetworkAddress(14) Opaque(15) BITS(16)  If the value of hpnicfObjectInfoType is dataRange, the rules below should be followed. 1) The returned value must have prefix 'R', and followed by string which has the format like 2) to 5), such as 'R[1,1]'. 2) If hpnicfObjectInfoValue returns Integer32, the format is as followed. Suppose A is a  MIB object. If SYNTAX of A is 'Integer32{1|2|3|5|6|7}', the format is 'R[1,3],[5,7]'. If SYNTAX of A is 'Integer32{1|3}', the format is 'R[1,1],[3,3]'. If SYNTAX of A is 'Integer32', the format is 'R[]' which means the default value  range of Integer32 between -2147483648 and 2147483647. 3) The process of Counter, Counter32, Counter64, Unsigned32, Gauge32, INTEGER is the  same as that of Integer32. 4) If SYNTAX of A is other types such as OCTET STRING, then this object returns default value 'R[]'. 5) If SYNTAX of A is 'BITS{a(0),b(1)}', the format is 'R[0,0],[1,1]'.  If the value of hpnicfObjectInfoType is dataLength, the rules below should be followed. 1) The returned value must have prefix 'L', and followed by string which has the format like 2) to 4), such as 'L[6,6]'. 2) If SYNTAX of A is 'OCTET STRING(SIZE (6|10..255))', the format is 'L[6,6],[10,255]'. If SYNTAX of A is 'OCTET STRING', the format is like 'L[]' which means the default  length of OCTET STRING between 0 and 65535. 3) If SYNTAX of A is BITS, the format of it is t
.1.3.6.1.4.1.11.2.14.11.15.2.55.2,HPN-ICF-OBJECT-INFO-MIB::hpnicfObjectInfoMIBConformance,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.2.55.2.1,HPN-ICF-OBJECT-INFO-MIB::hpnicfObjectInfoMIBCompliances,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.2.55.2.1.1,HPN-ICF-OBJECT-INFO-MIB::hpnicfObjectInfoMIBCompliance,,,,,,  The compliance statement for implementing ObjectInfo MIB. 
.1.3.6.1.4.1.11.2.14.11.15.2.55.2.2,HPN-ICF-OBJECT-INFO-MIB::hpnicfObjectInfoMIBGroups,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.2.55.2.2.1,HPN-ICF-OBJECT-INFO-MIB::hpnicfObjectInfoTableGroup,,,,,,  The basic collection of hpnicfObjectInfo table objects. 
.1.3.6.1.4.1.11.2.14.11.15.2.56,HPN-ICF-OID-MIB::hpnicfStorage,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.2.57,HPN-ICF-OID-MIB::hpnicfDvpn,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.2.57.1,HPN-ICF-DVPN-MIB::hpnicfDvpnMibObjects,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.2.57.1.1,HPN-ICF-DVPN-MIB::hpnicfDvpnMibGlobal,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.2.57.1.1.1,HPN-ICF-DVPN-MIB::hpnicfDvpnServiceEnable,INTEGER,read-write,,current,enable(1):disable(2), Dvpn service enable or disable. If dvpn service is 'disable', dvpn service can not be used. 
.1.3.6.1.4.1.11.2.14.11.15.2.57.1.1.2,HPN-ICF-DVPN-MIB::hpnicfDvpnClassNumber,Integer32,read-only,,current,, The number of dvpn classes. It is only used on client. 
.1.3.6.1.4.1.11.2.14.11.15.2.57.1.1.3,HPN-ICF-DVPN-MIB::hpnicfDvpnClientNumber,Integer32,read-only,,current,, The number of clients which register on the server. When a session of server to client type is built, add 1 to the value of this node. It is only used on server. 
.1.3.6.1.4.1.11.2.14.11.15.2.57.1.1.4,HPN-ICF-DVPN-MIB::hpnicfDvpnMapAgeTime,Integer32,read-write,,current,, Dvpn map age time, the unit is second. It is only used on server. 
.1.3.6.1.4.1.11.2.14.11.15.2.57.1.1.5,HPN-ICF-DVPN-MIB::hpnicfDvpnClientRegisterInterval,Integer32,read-write,,current,, The length of time between the registering of client, the unit is second. It is only used on client. 
.1.3.6.1.4.1.11.2.14.11.15.2.57.1.1.6,HPN-ICF-DVPN-MIB::hpnicfDvpnClientRegisterDumb,Integer32,read-write,,current,, The length of time when client dumbs, the unit is second. It is only used on client. 
.1.3.6.1.4.1.11.2.14.11.15.2.57.1.1.7,HPN-ICF-DVPN-MIB::hpnicfDvpnClientRegisterRetry,Integer32,read-write,,current,, Regist retry times of client after register fail. It is only used on client. 
.1.3.6.1.4.1.11.2.14.11.15.2.57.1.1.8,HPN-ICF-DVPN-MIB::hpnicfDvpnInputPkt,Unsigned32,read-only,,current,, The number of recieved packets. 
.1.3.6.1.4.1.11.2.14.11.15.2.57.1.1.9,HPN-ICF-DVPN-MIB::hpnicfDvpnDropPkt,Unsigned32,read-only,,current,, The number of packets have been droped. 
.1.3.6.1.4.1.11.2.14.11.15.2.57.1.1.10,HPN-ICF-DVPN-MIB::hpnicfDvpnOutputPkt,Unsigned32,read-only,,current,, The number of packets have been sent. 
.1.3.6.1.4.1.11.2.14.11.15.2.57.1.1.11,HPN-ICF-DVPN-MIB::hpnicfDvpnOutputErrorPkt,Unsigned32,read-only,,current,, The number of output error packets. 
.1.3.6.1.4.1.11.2.14.11.15.2.57.1.1.12,HPN-ICF-DVPN-MIB::hpnicfDvpnEncryptErrorPkt,Unsigned32,read-only,,current,, The number of packets have been encrypted wrongly. 
.1.3.6.1.4.1.11.2.14.11.15.2.57.1.1.13,HPN-ICF-DVPN-MIB::hpnicfDvpnCurrentDeviceRole,INTEGER,read-only,,current,none(1):server(2):client(3):both(4), The current role of the device. The value is decided by the configuration of the tunnel-interface. 
.1.3.6.1.4.1.11.2.14.11.15.2.57.1.1.14,HPN-ICF-DVPN-MIB::hpnicfDvpnDomainNumber,Integer32,read-only,,current,, The number of dvpn domains. 
.1.3.6.1.4.1.11.2.14.11.15.2.57.1.1.15,HPN-ICF-DVPN-MIB::hpnicfDvpnMapNumber,Integer32,read-only,,current,, The number of dvpn maps. 
.1.3.6.1.4.1.11.2.14.11.15.2.57.1.1.16,HPN-ICF-DVPN-MIB::hpnicfDvpnSessionNumber,Integer32,read-only,,current,, The number of dvpn sessiones including the session of all states. 
.1.3.6.1.4.1.11.2.14.11.15.2.57.1.1.17,HPN-ICF-DVPN-MIB::hpnicfDvpnServerPreSharedKey,OCTET,read-write,,current,, The pre-shared-key of server. It is only used on server. 
.1.3.6.1.4.1.11.2.14.11.15.2.57.1.1.18,HPN-ICF-DVPN-MIB::hpnicfDvpnMapTrapEnable,INTEGER,read-write,,current,enable(1):disable(2), Dvpn map trap enable or disable. 
.1.3.6.1.4.1.11.2.14.11.15.2.57.1.1.19,HPN-ICF-DVPN-MIB::hpnicfDvpnSessionTrapEnable,INTEGER,read-write,,current,enable(1):disable(2), Dvpn session trap enable or disable. 
.1.3.6.1.4.1.11.2.14.11.15.2.57.1.1.20,HPN-ICF-DVPN-MIB::hpnicfDvpnVersion,INTEGER,read-only,,current,version2(1):version3(2), Dvpn version. 
.1.3.6.1.4.1.11.2.14.11.15.2.57.1.1.21,HPN-ICF-DVPN-MIB::hpnicfDvpnClearDomainAllConection,Integer32,read-write,,current,, Clear all dvpn conects in the domain, the parameter is the id of the domain. 
.1.3.6.1.4.1.11.2.14.11.15.2.57.1.1.22,HPN-ICF-DVPN-MIB::hpnicfDvpnClearDvpnStaInfo,Integer32,read-write,,current,, Clear the statistic information of dvpn. 
.1.3.6.1.4.1.11.2.14.11.15.2.57.1.1.23,HPN-ICF-DVPN-MIB::hpnicfDvpnTotalRedirectNumber,Unsigned32,read-only,,current,, The number of redirect packets. It is only used on server. 
.1.3.6.1.4.1.11.2.14.11.15.2.57.1.1.24,HPN-ICF-DVPN-MIB::hpnicfDvpnGlobalAuthenClientType,INTEGER,read-write,,current,none(1):pap(2):chap(3), Dvpn global authentication type being used by server to client. The value is decided by the configuration by the user. 
.1.3.6.1.4.1.11.2.14.11.15.2.57.1.1.25,HPN-ICF-DVPN-MIB::hpnicfDvpnGlobalUserDefAAADomain,OCTET,read-write,,current,, Dvpn global AAA domain of the user. The domain will decide the authentication server which is used by the dvpn server to authenticate dvpn client. 
.1.3.6.1.4.1.11.2.14.11.15.2.57.1.1.26,HPN-ICF-DVPN-MIB::hpnicfDvpnLocalDeviceId,OCTET,read-only,,current,, The device ID, it is a string. 
.1.3.6.1.4.1.11.2.14.11.15.2.57.1.1.27,HPN-ICF-DVPN-MIB::hpnicfDvpnSessionHisAgeTime,Integer32,read-write,,current,, The age-time of the hpnicfDvpnSessionHisTable table. The unit is hour. 
.1.3.6.1.4.1.11.2.14.11.15.2.57.1.1.28,HPN-ICF-DVPN-MIB::hpnicfDvpnSessionHisReset,INTEGER,read-write,,current,reset(1), The reset flag of dvpn hpnicfDvpnSessionHisTable table. 
.1.3.6.1.4.1.11.2.14.11.15.2.57.1.2,HPN-ICF-DVPN-MIB::hpnicfDvpnMibTableTroop,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.2.57.1.2.1,HPN-ICF-DVPN-MIB::hpnicfDvpnPolicyTable,,not-accessible,,current,, The dvpn policy table. It is used on dvpn server. 
.1.3.6.1.4.1.11.2.14.11.15.2.57.1.2.1.1,HPN-ICF-DVPN-MIB::hpnicfDvpnPolicyEntry,,not-accessible,hpnicfDvpnPolicyName,current,, The entry of hpnicfDvpnPolicyTable. 
.1.3.6.1.4.1.11.2.14.11.15.2.57.1.2.1.1.1,HPN-ICF-DVPN-MIB::hpnicfDvpnPolicyName,OCTET,not-accessible,,current,, The name of Dvpn policy. 
.1.3.6.1.4.1.11.2.14.11.15.2.57.1.2.1.1.2,HPN-ICF-DVPN-MIB::hpnicfDvpnPoAuthenClientType,INTEGER,read-create,,current,none(1):pap(2):chap(3), The authentication type used by server to client. The value is decided by the policy configuration of the user. The default value is none. 
.1.3.6.1.4.1.11.2.14.11.15.2.57.1.2.1.1.3,HPN-ICF-DVPN-MIB::hpnicfDvpnPoSessionAlgorithmSuite,INTEGER,read-create,,current,dvpnDesCbcMd5PreShaModp768(1):dvpnDesCbcMd5PreShaModp1024(2):dvpnDesCbcSha1PreShaModp768(3):dvpnDesCbcSha1PreShaModp1024(4):dvpn3DesCbcMd5PreShaModp768(5):dvpn3DesCbcMd5PreShaModp1024(6):dvpn3DesCbcSha1PreShaModp768(7):dvpn3DesCbcSha1PreShaModp1024(8):dvpnAesCbcMd5PreShaModp768(9):dvpnAesCbcMd5PreShaModp1024(10):dvpnAesCbcSHA1Sha1PreShaModp768(11):dvpnAesCbcSHA1Sha1PreShaModp1024(12):dvpnAlgorithmNone(13), The algorithm suite used when session is created. 
.1.3.6.1.4.1.11.2.14.11.15.2.57.1.2.1.1.4,HPN-ICF-DVPN-MIB::hpnicfDvpnPoSessionIdleTime,Integer32,read-create,,current,, The session idle time, the unit is second. 
.1.3.6.1.4.1.11.2.14.11.15.2.57.1.2.1.1.5,HPN-ICF-DVPN-MIB::hpnicfDvpnPoSessionKeepTime,Integer32,read-create,,current,, The session keepalive time, the unit is second. 
.1.3.6.1.4.1.11.2.14.11.15.2.57.1.2.1.1.6,HPN-ICF-DVPN-MIB::hpnicfDvpnPoSessionSetupInterval,Integer32,read-create,,current,, The session setup interval time, the unit is second. 
.1.3.6.1.4.1.11.2.14.11.15.2.57.1.2.1.1.7,HPN-ICF-DVPN-MIB::hpnicfDvpnPoDataAlgorithmSuite,INTEGER,read-create,,current,dvpnDesCbcMd5PreShaModp768(1):dvpnDesCbcMd5PreShaModp1024(2):dvpnDesCbcSha1PreShaModp768(3):dvpnDesCbcSha1PreShaModp1024(4):dvpn3DesCbcMd5PreShaModp768(5):dvpn3DesCbcMd5PreShaModp1024(6):dvpn3DesCbcSha1PreShaModp768(7):dvpn3DesCbcSha1PreShaModp1024(8):dvpnAesCbcMd5PreShaModp768(9):dvpnAesCbcMd5PreShaModp1024(10):dvpnAesCbcSHA1Sha1PreShaModp768(11):dvpnAesCbcSHA1Sha1PreShaModp1024(12):dvpnAlgorithmNone(13), The algorithm suite used by the session for createing ipsec sa. 
.1.3.6.1.4.1.11.2.14.11.15.2.57.1.2.1.1.8,HPN-ICF-DVPN-MIB::hpnicfDvpnPoSaSeconds,Integer32,read-create,,current,, The duration of DVPN IPSec security association. The unit is second. 
.1.3.6.1.4.1.11.2.14.11.15.2.57.1.2.1.1.9,HPN-ICF-DVPN-MIB::hpnicfDvpnPoUserDefAAADomain,OCTET,read-create,,current,, Dvpn policy AAA domain of the user. The domain will decide the authentication server which used by the dvpn server to authenticate dvpn client. 
.1.3.6.1.4.1.11.2.14.11.15.2.57.1.2.1.1.10,HPN-ICF-DVPN-MIB::hpnicfDvpnPoRefTimes,Integer32,read-only,,current,, The total times of the policy being used by dvpn. 
.1.3.6.1.4.1.11.2.14.11.15.2.57.1.2.1.1.11,HPN-ICF-DVPN-MIB::hpnicfDvpnPoRowStatus,INTEGER,read-create,,current,active(1):notInService(2):notReady(3):createAndGo(4):createAndWait(5):destroy(6), The status of this conceptual row. We support the characteristic of active(1),createAndGo(4),destroy(6). 
.1.3.6.1.4.1.11.2.14.11.15.2.57.1.2.2,HPN-ICF-DVPN-MIB::hpnicfDvpnDomainInfoTable,,not-accessible,,current,, The dvpn domain table. 
.1.3.6.1.4.1.11.2.14.11.15.2.57.1.2.2.1,HPN-ICF-DVPN-MIB::hpnicfDvpnDomainInfoEntry,,not-accessible,hpnicfDvpnDomainID,current,, The entry of hpnicfDvpnDomainInfoTable. 
.1.3.6.1.4.1.11.2.14.11.15.2.57.1.2.2.1.1,HPN-ICF-DVPN-MIB::hpnicfDvpnDomainID,Integer32,not-accessible,,current,, Dvpn domain ID. 
.1.3.6.1.4.1.11.2.14.11.15.2.57.1.2.2.1.2,HPN-ICF-DVPN-MIB::hpnicfDvpnDomainSessionNum,Unsigned32,read-only,,current,, The number of session in this dvpn domain. 
.1.3.6.1.4.1.11.2.14.11.15.2.57.1.2.2.1.3,HPN-ICF-DVPN-MIB::hpnicfDvpnDomainRedirectNum,Unsigned32,read-only,,current,, The number of redirect packets in this dvpn domain. 
.1.3.6.1.4.1.11.2.14.11.15.2.57.1.2.2.1.4,HPN-ICF-DVPN-MIB::hpnicfDvpnDomainInputPkt,Unsigned32,read-only,,current,, The number of input packets in this dvpn domain. 
.1.3.6.1.4.1.11.2.14.11.15.2.57.1.2.2.1.5,HPN-ICF-DVPN-MIB::hpnicfDvpnDomainDropPkt,Unsigned32,read-only,,current,, The number of drop packets in this dvpn domain. 
.1.3.6.1.4.1.11.2.14.11.15.2.57.1.2.2.1.6,HPN-ICF-DVPN-MIB::hpnicfDvpnDomainOutputPkt,Unsigned32,read-only,,current,, The number of output packets in this dvpn domain. 
.1.3.6.1.4.1.11.2.14.11.15.2.57.1.2.2.1.7,HPN-ICF-DVPN-MIB::hpnicfDvpnDomainOutputErrorPkt,Unsigned32,read-only,,current,, The number of output error packets in this dvpn domain. 
.1.3.6.1.4.1.11.2.14.11.15.2.57.1.2.2.1.8,HPN-ICF-DVPN-MIB::hpnicfDvpnDomainEncryptErrorPkt,Unsigned32,read-only,,current,, The number of encrypt error packets in this dvpn domain. 
.1.3.6.1.4.1.11.2.14.11.15.2.57.1.2.3,HPN-ICF-DVPN-MIB::hpnicfDvpnClassTable,,not-accessible,,current,, The Dvpn class table. It is only used on dvpn client. 
.1.3.6.1.4.1.11.2.14.11.15.2.57.1.2.3.1,HPN-ICF-DVPN-MIB::hpnicfDvpnClassEntry,,not-accessible,hpnicfDvpnClassName,current,, The entry of the hpnicfDvpnClassTable. 
.1.3.6.1.4.1.11.2.14.11.15.2.57.1.2.3.1.1,HPN-ICF-DVPN-MIB::hpnicfDvpnClassName,OCTET,not-accessible,,current,, The dvpn class name. It is the index of hpnicfDvpnClassTable. 
.1.3.6.1.4.1.11.2.14.11.15.2.57.1.2.3.1.2,HPN-ICF-DVPN-MIB::hpnicfDvpnClServerPublicIpType,INTEGER,read-create,,current,unknown(0):ipv4(1):ipv6(2):ipv4z(3):ipv6z(4):dns(16), Dvpn server public ip type (ipv4, ipv6). 
.1.3.6.1.4.1.11.2.14.11.15.2.57.1.2.3.1.3,HPN-ICF-DVPN-MIB::hpnicfDvpnClServerPublicIp,OCTET,read-create,,current,, Dvpn server public ip address. 
.1.3.6.1.4.1.11.2.14.11.15.2.57.1.2.3.1.4,HPN-ICF-DVPN-MIB::hpnicfDvpnClServerPriIpType,INTEGER,read-create,,current,unknown(0):ipv4(1):ipv6(2):ipv4z(3):ipv6z(4):dns(16), Dvpn server private ip type (ipv4, ipv6). 
.1.3.6.1.4.1.11.2.14.11.15.2.57.1.2.3.1.5,HPN-ICF-DVPN-MIB::hpnicfDvpnClServerPriIp,OCTET,read-create,,current,, Dvpn server private ip address. 
.1.3.6.1.4.1.11.2.14.11.15.2.57.1.2.3.1.6,HPN-ICF-DVPN-MIB::hpnicfDvpnClAlgorithmSuite,INTEGER,read-create,,current,dvpnDesCbcMd5PreShaModp768(1):dvpnDesCbcMd5PreShaModp1024(2):dvpnDesCbcSha1PreShaModp768(3):dvpnDesCbcSha1PreShaModp1024(4):dvpn3DesCbcMd5PreShaModp768(5):dvpn3DesCbcMd5PreShaModp1024(6):dvpn3DesCbcSha1PreShaModp768(7):dvpn3DesCbcSha1PreShaModp1024(8):dvpnAesCbcMd5PreShaModp768(9):dvpnAesCbcMd5PreShaModp1024(10):dvpnAesCbcSHA1Sha1PreShaModp768(11):dvpnAesCbcSHA1Sha1PreShaModp1024(12):dvpnAlgorithmNone(13), The algorithm suite used by the client when sending registry packets to the server. 'dvpnAlgorithmNone' is not supported here. 
.1.3.6.1.4.1.11.2.14.11.15.2.57.1.2.3.1.7,HPN-ICF-DVPN-MIB::hpnicfDvpnClAuthenServerType,INTEGER,read-create,,current,none(1):preShareKey(2), The authentication type being used by client to server. The value is decided by the class configuration of the user. The default value is none. 
.1.3.6.1.4.1.11.2.14.11.15.2.57.1.2.3.1.8,HPN-ICF-DVPN-MIB::hpnicfDvpnClPreShareKey,OCTET,read-create,,current,, Dvpn PreShareKey. It is used when the method used by client when authenticating server is pre-share-key, only when the value of the key is the same as that on the server, the client can authenticate server successfully. 
.1.3.6.1.4.1.11.2.14.11.15.2.57.1.2.3.1.9,HPN-ICF-DVPN-MIB::hpnicfDvpnClUserName,OCTET,read-create,,current,, Dvpn UserName. It is configured by the user. 
.1.3.6.1.4.1.11.2.14.11.15.2.57.1.2.3.1.10,HPN-ICF-DVPN-MIB::hpnicfDvpnClPwdEncrypted,INTEGER,read-create,,current,simple(1):cipher(2), Dvpn password encrypted or not. 
.1.3.6.1.4.1.11.2.14.11.15.2.57.1.2.3.1.11,HPN-ICF-DVPN-MIB::hpnicfDvpnClPasswd,OCTET,read-create,,current,, Dvpn password. It is configured by the user. 
.1.3.6.1.4.1.11.2.14.11.15.2.57.1.2.3.1.12,HPN-ICF-DVPN-MIB::hpnicfDvpnClassRowStatus,INTEGER,read-create,,current,active(1):notInService(2):notReady(3):createAndGo(4):createAndWait(5):destroy(6), The status of this conceptual row. Only 'active', 'createAndGo' and 'destroy' are supported. 
.1.3.6.1.4.1.11.2.14.11.15.2.57.1.2.4,HPN-ICF-DVPN-MIB::hpnicfDvpnTunnelTable,,not-accessible,,current,, The dvpn tunnel table. 
.1.3.6.1.4.1.11.2.14.11.15.2.57.1.2.4.1,HPN-ICF-DVPN-MIB::hpnicfDvpnTunnelEntry,,not-accessible,ifIndex,current,, The Entry of hpnicfDvpnTunnelTable. 
.1.3.6.1.4.1.11.2.14.11.15.2.57.1.2.4.1.1,HPN-ICF-DVPN-MIB::hpnicfDvpnTunnelInterfaceType,INTEGER,read-write,,current,client(1):server(2), The type of dvpn tunnel (client or server). 
.1.3.6.1.4.1.11.2.14.11.15.2.57.1.2.4.1.2,HPN-ICF-DVPN-MIB::hpnicfDvpnTunnelAcl,Integer32,read-write,,current,, The security acl used by the tunnel. If a packet permits the rules, it will not be encrypted. 
.1.3.6.1.4.1.11.2.14.11.15.2.57.1.2.4.1.3,HPN-ICF-DVPN-MIB::hpnicfDvpnTunnelClientRegType,INTEGER,read-write,,current,undistributed(1):forward(2):undistributedandforward(3):normal(4), The register type used by the client . Only the interface type is client, it can be used. undistributed: If a client send a packet to the client with this configuration, setver will only forward the packet whitout sending redirect packets. forward: The client with this configuration will only send packets forwarded by server, which means it can not initiate to build a session with other clients. undistributedandforward: The client with this configuration have the characteristics of both 'forward' and 'undistributed'. normal: The client with this configuration can build session with other clients without any restriction. 
.1.3.6.1.4.1.11.2.14.11.15.2.57.1.2.4.1.4,HPN-ICF-DVPN-MIB::hpnicfDvpnTunnelDvpnId,Integer32,read-write,,current,, The dvpn ID used by the tunnel. The dvpn ID is 0 means that user does not configure dvpn ID. User can not configure a dvpn ID with 0. 
.1.3.6.1.4.1.11.2.14.11.15.2.57.1.2.4.1.5,HPN-ICF-DVPN-MIB::hpnicfDvpnTunnelPolicy,OCTET,read-write,,current,, The dvpn policy used by the tunnel. Only the interface type is server, it can be used. 
.1.3.6.1.4.1.11.2.14.11.15.2.57.1.2.4.1.6,HPN-ICF-DVPN-MIB::hpnicfDvpnTunnelClass,OCTET,read-write,,current,, The dvpn class used by the tunnel. Only the interface type is client, it can be used. 
.1.3.6.1.4.1.11.2.14.11.15.2.57.1.2.5,HPN-ICF-DVPN-MIB::hpnicfDvpnMapTable,,not-accessible,,current,, The dvpn map table. 
.1.3.6.1.4.1.11.2.14.11.15.2.57.1.2.5.1,HPN-ICF-DVPN-MIB::hpnicfDvpnMapEntry,,not-accessible,hpnicfDvpnMapIndex,current,, The entry of the hpnicfDvpnMapTable. 
.1.3.6.1.4.1.11.2.14.11.15.2.57.1.2.5.1.1,HPN-ICF-DVPN-MIB::hpnicfDvpnMapIndex,Unsigned32,accessible-for-notify,,current,, The index of hpnicfDvpnMapTable. 
.1.3.6.1.4.1.11.2.14.11.15.2.57.1.2.5.1.2,HPN-ICF-DVPN-MIB::hpnicfDvpnMapPeerDeviceId,OCTET,read-only,,current,, The identifier of peer device. It is a string. 
.1.3.6.1.4.1.11.2.14.11.15.2.57.1.2.5.1.3,HPN-ICF-DVPN-MIB::hpnicfDvpnMapDvpnId,Unsigned32,read-only,,current,, The ID of the dvpn domain which the map belongs to. The dvpn ID is 0 means that the map has not been built. It has not gotten the dvpn ID at that time. 
.1.3.6.1.4.1.11.2.14.11.15.2.57.1.2.5.1.4,HPN-ICF-DVPN-MIB::hpnicfDvpnMapBuildTime,TimeTicks,read-only,,current,, The time of the map created, the unit is second. 
.1.3.6.1.4.1.11.2.14.11.15.2.57.1.2.5.1.5,HPN-ICF-DVPN-MIB::hpnicfDvpnMapPeerPriIpType,INTEGER,read-only,,current,unknown(0):ipv4(1):ipv6(2):ipv4z(3):ipv6z(4):dns(16), The private ip type (ipv4, ipv6) of map peer device. 
.1.3.6.1.4.1.11.2.14.11.15.2.57.1.2.5.1.6,HPN-ICF-DVPN-MIB::hpnicfDvpnMapPeerPriIp,OCTET,read-only,,current,, The private ip of map peer device. 
.1.3.6.1.4.1.11.2.14.11.15.2.57.1.2.5.1.7,HPN-ICF-DVPN-MIB::hpnicfDvpnMapPeerPublicIpType,INTEGER,read-only,,current,unknown(0):ipv4(1):ipv6(2):ipv4z(3):ipv6z(4):dns(16), The public ip type (ipv4, ipv6) of map peer device. 
.1.3.6.1.4.1.11.2.14.11.15.2.57.1.2.5.1.8,HPN-ICF-DVPN-MIB::hpnicfDvpnMapPeerPublicIp,OCTET,read-only,,current,, The public ip of map peer device. 
.1.3.6.1.4.1.11.2.14.11.15.2.57.1.2.5.1.9,HPN-ICF-DVPN-MIB::hpnicfDvpnMapLocalPriIpType,INTEGER,read-only,,current,unknown(0):ipv4(1):ipv6(2):ipv4z(3):ipv6z(4):dns(16), The private ip type (ipv4, ipv6) of map local device. 
.1.3.6.1.4.1.11.2.14.11.15.2.57.1.2.5.1.10,HPN-ICF-DVPN-MIB::hpnicfDvpnMapLocalPriIp,OCTET,read-only,,current,, The private ip of map local device. 
.1.3.6.1.4.1.11.2.14.11.15.2.57.1.2.5.1.11,HPN-ICF-DVPN-MIB::hpnicfDvpnMapLocalPublicIpType,INTEGER,read-only,,current,unknown(0):ipv4(1):ipv6(2):ipv4z(3):ipv6z(4):dns(16), The public ip type (ipv4, ipv6) of map local device. 
.1.3.6.1.4.1.11.2.14.11.15.2.57.1.2.5.1.12,HPN-ICF-DVPN-MIB::hpnicfDvpnMapLocalPublicIp,OCTET,read-only,,current,, The public ip of map local device. 
.1.3.6.1.4.1.11.2.14.11.15.2.57.1.2.5.1.13,HPN-ICF-DVPN-MIB::hpnicfDvpnMapUserName,OCTET,read-only,,current,, The user name used by the client registering to server. If the client is not been authenticated, this is a null string. 
.1.3.6.1.4.1.11.2.14.11.15.2.57.1.2.5.1.14,HPN-ICF-DVPN-MIB::hpnicfDvpnMapUdpPort,Integer32,read-only,,current,, The udp port used by map peer device. 
.1.3.6.1.4.1.11.2.14.11.15.2.57.1.2.5.1.15,HPN-ICF-DVPN-MIB::hpnicfDvpnMapControlId,Unsigned32,read-only,,current,, Dvpn map control ID. 
.1.3.6.1.4.1.11.2.14.11.15.2.57.1.2.5.1.16,HPN-ICF-DVPN-MIB::hpnicfDvpnMapType,INTEGER,read-only,,current,clientToserver(1):serverToclient(2):serverToserver(3):clientToclient(4), The type of the map. 'clientToclient' is not supported here. 
.1.3.6.1.4.1.11.2.14.11.15.2.57.1.2.5.1.17,HPN-ICF-DVPN-MIB::hpnicfDvpnMapState,INTEGER,read-only,,current,mapClientInit(1):mapClientBegin(2):mapClientAlgreq(3):mapClientKexReq(4):mapClientAuthenReq(5):mapClientConfigReq(6):mapClientReq(7):mapClientSuccess(8):mapServerBegin(9):mapServerAlgorithm(10):mapServerKexInit(11):mapServerAuthenInit(12):mapServerConfigInit(13):mapServerInit(14):mapServerFinished(15), mapClientInit: The client initiates the map. mapClientBegin: The client begins the process of registering to the server. mapClientAlgreq: The client requests to negotiate the algorithm. mapClientKexReq: The client requests to negotiate the key. mapClientAuthenReq: The client sends authentication information to the server. mapClientConfigReq: The client requests to get some configuration information from the server. Do not support now. mapClientReq: The client requests to register to the server. mapClientSuccess: The client registers to the server successfully. mapServerBegin: The server begins the process of receive a new register. mapServerAlgorithm:The sever begins to negotiate Algorithm. mapServerKexInit: The server replys to the algorithm negotiation packet from the client successfully and begin to negotiate key. mapServerAuthenInit: The server replys to the key negotiation packet from the client successfully and begin to authenticate client, in the case of the authentication-client method is not none. mapServerConfigInit: The server send some configuration information to client. Do not support now. mapServerInit: The server replys to the authentication packet from the client successfully and begin to receive client information. mapServerFinished: The server receives client information successfully. 
.1.3.6.1.4.1.11.2.14.11.15.2.57.1.2.6,HPN-ICF-DVPN-MIB::hpnicfDvpnSessionTable,,not-accessible,,current,, The dvpn session table. 
.1.3.6.1.4.1.11.2.14.11.15.2.57.1.2.6.1,HPN-ICF-DVPN-MIB::hpnicfDvpnSessionEntry,,not-accessible,hpnicfDvpnSessionDvpnId:hpnicfDvpnSessionPeerPriIpType:hpnicfDvpnSessionPeerPriIp,current,, The entry of hpnicfDvpnSessionTable. 
.1.3.6.1.4.1.11.2.14.11.15.2.57.1.2.6.1.1,HPN-ICF-DVPN-MIB::hpnicfDvpnSessionDvpnId,Integer32,accessible-for-notify,,current,, The ID of the dvpn domain which the session belongs to. 
.1.3.6.1.4.1.11.2.14.11.15.2.57.1.2.6.1.2,HPN-ICF-DVPN-MIB::hpnicfDvpnSessionPeerPriIpType,INTEGER,accessible-for-notify,,current,unknown(0):ipv4(1):ipv6(2):ipv4z(3):ipv6z(4):dns(16), The private ip type (ipv4, ipv6) of session peer device. 
.1.3.6.1.4.1.11.2.14.11.15.2.57.1.2.6.1.3,HPN-ICF-DVPN-MIB::hpnicfDvpnSessionPeerPriIp,OCTET,accessible-for-notify,,current,, The private ip of the session peer device. 
.1.3.6.1.4.1.11.2.14.11.15.2.57.1.2.6.1.4,HPN-ICF-DVPN-MIB::hpnicfDvpnSessionPeerDeviceId,OCTET,read-only,,current,, The device ID of session peer device. It is a string. 
.1.3.6.1.4.1.11.2.14.11.15.2.57.1.2.6.1.5,HPN-ICF-DVPN-MIB::hpnicfDvpnSessionBuildTime,TimeTicks,read-only,,current,, The time of the Session being built, the unit is second. 
.1.3.6.1.4.1.11.2.14.11.15.2.57.1.2.6.1.6,HPN-ICF-DVPN-MIB::hpnicfDvpnSessionPeerPubIpType,INTEGER,read-only,,current,unknown(0):ipv4(1):ipv6(2):ipv4z(3):ipv6z(4):dns(16), The public ip type (ipv4, ipv6) of session peer device. 
.1.3.6.1.4.1.11.2.14.11.15.2.57.1.2.6.1.7,HPN-ICF-DVPN-MIB::hpnicfDvpnSessionPeerPubIp,OCTET,read-only,,current,, The public ip of session peer device. 
.1.3.6.1.4.1.11.2.14.11.15.2.57.1.2.6.1.8,HPN-ICF-DVPN-MIB::hpnicfDvpnSessionLocalPubIpType,INTEGER,read-only,,current,unknown(0):ipv4(1):ipv6(2):ipv4z(3):ipv6z(4):dns(16), The public ip type (ipv4, ipv6) of session local device. 
.1.3.6.1.4.1.11.2.14.11.15.2.57.1.2.6.1.9,HPN-ICF-DVPN-MIB::hpnicfDvpnSessionLocalPubIp,OCTET,read-only,,current,, The public ip of session local device. 
.1.3.6.1.4.1.11.2.14.11.15.2.57.1.2.6.1.10,HPN-ICF-DVPN-MIB::hpnicfDvpnSessionLocalPriIpType,INTEGER,read-only,,current,unknown(0):ipv4(1):ipv6(2):ipv4z(3):ipv6z(4):dns(16), The private ip type (ipv4, ipv6) of session local device. 
.1.3.6.1.4.1.11.2.14.11.15.2.57.1.2.6.1.11,HPN-ICF-DVPN-MIB::hpnicfDvpnSessionLocalPriIp,OCTET,read-only,,current,, The private ip of session local device. 
.1.3.6.1.4.1.11.2.14.11.15.2.57.1.2.6.1.12,HPN-ICF-DVPN-MIB::hpnicfDvpnSessionPeerUdpPort,Integer32,read-only,,current,, The udp port used by session peer device . 
.1.3.6.1.4.1.11.2.14.11.15.2.57.1.2.6.1.13,HPN-ICF-DVPN-MIB::hpnicfDvpnSessionInitiator,INTEGER,read-only,,current,yes(1):no(2), The flag of initiator. 
.1.3.6.1.4.1.11.2.14.11.15.2.57.1.2.6.1.14,HPN-ICF-DVPN-MIB::hpnicfDvpnSessionUserName,OCTET,read-only,,current,, The user's name. If the session type is client to client, the value of this object is a null string. 
.1.3.6.1.4.1.11.2.14.11.15.2.57.1.2.6.1.15,HPN-ICF-DVPN-MIB::hpnicfDvpnSessionState,INTEGER,read-only,,current,sessionSetupInit(1):sessionSetupReq(2):sessionSetupSuccess(3):sessionRekeyReq(4):sessionRekeyRep(5), The state of the session. sessionSetupInit: The initiation of the session. sessionSetupReq: The initiator requests to negotiate the SA and so on of the session. sessionSetupSuccess: The session has been built successfully. sessionRekeyReq: The initiator requests to renegotiate the SA. sessionRekeyRep: The passive side replies with a SA renegotiation response packet successfully. 
.1.3.6.1.4.1.11.2.14.11.15.2.57.1.2.6.1.16,HPN-ICF-DVPN-MIB::hpnicfDvpnSessionType,INTEGER,read-only,,current,clientToserver(1):serverToclient(2):serverToserver(3):clientToclient(4), The type of the session. 
.1.3.6.1.4.1.11.2.14.11.15.2.57.1.2.6.1.17,HPN-ICF-DVPN-MIB::hpnicfDvpnSessionPeerType,INTEGER,read-only,,current,router(1):pcClient(2), The type of the session peer device. It may be client software or a router. 
.1.3.6.1.4.1.11.2.14.11.15.2.57.1.2.7,HPN-ICF-DVPN-MIB::hpnicfDvpnSessionHisTable,,not-accessible,,current,, The dvpn session history table. This table contains session's history information, include input/output packet number, up/down time, etc. This table will exist during the 'hpnicfDvpnSessionHisAgeTime'. 
.1.3.6.1.4.1.11.2.14.11.15.2.57.1.2.7.1,HPN-ICF-DVPN-MIB::hpnicfDvpnSessionHisEntry,,not-accessible,hpnicfDvpnSessionHisDvpnID:hpnicfDvpnSessionHisPeerPriIPType:hpnicfDvpnSessionHisPeerPriIP,current,, The entry of hpnicfDvpnSessionHisTable. 
.1.3.6.1.4.1.11.2.14.11.15.2.57.1.2.7.1.1,HPN-ICF-DVPN-MIB::hpnicfDvpnSessionHisDvpnID,Integer32,not-accessible,,current,, The ID of the dvpn domain which the session belongs to. 
.1.3.6.1.4.1.11.2.14.11.15.2.57.1.2.7.1.2,HPN-ICF-DVPN-MIB::hpnicfDvpnSessionHisPeerPriIPType,INTEGER,read-only,,current,unknown(0):ipv4(1):ipv6(2):ipv4z(3):ipv6z(4):dns(16), The private ip type (ipv4, ipv6) of session peer device. 
.1.3.6.1.4.1.11.2.14.11.15.2.57.1.2.7.1.3,HPN-ICF-DVPN-MIB::hpnicfDvpnSessionHisPeerPriIP,OCTET,not-accessible,,current,, The private ip of the session peer device. 
.1.3.6.1.4.1.11.2.14.11.15.2.57.1.2.7.1.4,HPN-ICF-DVPN-MIB::hpnicfDvpnSessionHisSendPkt,Unsigned32,read-only,,current,, The number of sent packets on the session. 
.1.3.6.1.4.1.11.2.14.11.15.2.57.1.2.7.1.5,HPN-ICF-DVPN-MIB::hpnicfDvpnSessionHisRcvPkt,Unsigned32,read-only,,current,, The number of received packets on the session. 
.1.3.6.1.4.1.11.2.14.11.15.2.57.1.2.7.1.6,HPN-ICF-DVPN-MIB::hpnicfDvpnSessionHisOnlineNumber,Unsigned32,read-only,,current,, The number of the session online. 
.1.3.6.1.4.1.11.2.14.11.15.2.57.1.2.7.1.7,HPN-ICF-DVPN-MIB::hpnicfDvpnSessionHisFirstUpTime,TimeTicks,read-only,,current,, The session first online time. 
.1.3.6.1.4.1.11.2.14.11.15.2.57.1.2.7.1.8,HPN-ICF-DVPN-MIB::hpnicfDvpnSessionHisLastUpTime,TimeTicks,read-only,,current,, The session last online time. 
.1.3.6.1.4.1.11.2.14.11.15.2.57.1.2.7.1.9,HPN-ICF-DVPN-MIB::hpnicfDvpnSessionHisLastDownTime,TimeTicks,read-only,,current,, The session last down time. 
.1.3.6.1.4.1.11.2.14.11.15.2.57.1.2.7.1.10,HPN-ICF-DVPN-MIB::hpnicfDvpnSessionHisOnlineFlag,INTEGER,read-only,,current,yes(1):no(2), If the session is online, the value is 'yes'. If the session is not online, the value is 'no'. 
.1.3.6.1.4.1.11.2.14.11.15.2.57.1.2.7.1.11,HPN-ICF-DVPN-MIB::hpnicfDvpnSessionHisPeerDeviceId,OCTET,read-only,,current,, The identifier of peer device. It is a string. 
.1.3.6.1.4.1.11.2.14.11.15.2.57.1.3,HPN-ICF-DVPN-MIB::hpnicfDvpnMibNotification,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.2.57.1.3.0,HPN-ICF-DVPN-MIB::hpnicfDvpnNotification,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.2.57.1.3.0.1,HPN-ICF-DVPN-MIB::hpnicfDvpnSessionBuildNotification,,,,,, Dvpn session build notification. 
.1.3.6.1.4.1.11.2.14.11.15.2.57.1.3.0.2,HPN-ICF-DVPN-MIB::hpnicfDvpnSessionDelNotification,,,,,, Dvpn session deleted notification. 
.1.3.6.1.4.1.11.2.14.11.15.2.57.1.3.0.3,HPN-ICF-DVPN-MIB::hpnicfDvpnMapBuildNotification,,,,,, Dvpn map build notification. 
.1.3.6.1.4.1.11.2.14.11.15.2.57.1.3.0.4,HPN-ICF-DVPN-MIB::hpnicfDvpnMapDelNotification,,,,,, Dvpn map deleted notification. 
.1.3.6.1.4.1.11.2.14.11.15.2.57.1.4,HPN-ICF-DVPN-MIB::hpnicfDvpnMibConformance,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.2.57.1.4.1,HPN-ICF-DVPN-MIB::hpnicfDvpnMibCompliances,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.2.57.1.4.1.1,HPN-ICF-DVPN-MIB::hpnicfDvpnMibCompliance,,,,,, The compliance statement for entities which implement the DVPN MIB. 
.1.3.6.1.4.1.11.2.14.11.15.2.57.1.4.2,HPN-ICF-DVPN-MIB::hpnicfDvpnMibGroups,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.2.57.1.4.2.1,HPN-ICF-DVPN-MIB::hpnicfDvpnGlobalGroup,,,,,, A collection of objects providing dvpn global information. 
.1.3.6.1.4.1.11.2.14.11.15.2.57.1.4.2.2,HPN-ICF-DVPN-MIB::hpnicfDvpnPolicyGroup,,,,,, A collection of objects providing dvpn policy information. 
.1.3.6.1.4.1.11.2.14.11.15.2.57.1.4.2.3,HPN-ICF-DVPN-MIB::hpnicfDvpnDomainInfoGroup,,,,,, A collection of objects providing dvpn domain information. 
.1.3.6.1.4.1.11.2.14.11.15.2.57.1.4.2.4,HPN-ICF-DVPN-MIB::hpnicfDvpnClassGroup,,,,,, A collection of objects providing dvpn class information. 
.1.3.6.1.4.1.11.2.14.11.15.2.57.1.4.2.5,HPN-ICF-DVPN-MIB::hpnicfDvpnTunnelGroup,,,,,, A collection of objects providing dvpn tunnel interface information. 
.1.3.6.1.4.1.11.2.14.11.15.2.57.1.4.2.6,HPN-ICF-DVPN-MIB::hpnicfDvpnMapGroup,,,,,, A collection of objects providing dvpn map information. 
.1.3.6.1.4.1.11.2.14.11.15.2.57.1.4.2.7,HPN-ICF-DVPN-MIB::hpnicfDvpnSessionGroup,,,,,, A collection of objects providing dvpn session information. 
.1.3.6.1.4.1.11.2.14.11.15.2.57.1.4.2.8,HPN-ICF-DVPN-MIB::hpnicfDvpnSessionHisGroup,,,,,, A collection of objects providing dvpn session history information. 
.1.3.6.1.4.1.11.2.14.11.15.2.57.1.4.2.9,HPN-ICF-DVPN-MIB::hpnicfDvpnNotificationGroup,,,,,, A collection of objects providing dvpn notification information. 
.1.3.6.1.4.1.11.2.14.11.15.2.58,HPN-ICF-OID-MIB::hpnicfDhcpRelay,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.2.58.1,HPN-ICF-DHCPRELAY-MIB::hpnicfDHCPRMibObject,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.2.58.1.1,HPN-ICF-DHCPRELAY-MIB::hpnicfDHCPRIfSelectTable,,not-accessible,,current,,A table for configuring relay mode for interfaces. 
.1.3.6.1.4.1.11.2.14.11.15.2.58.1.1.1,HPN-ICF-DHCPRELAY-MIB::hpnicfDHCPRIfSelectEntry,,not-accessible,ifIndex,current,,An entry for configuring relay mode for an interface. 
.1.3.6.1.4.1.11.2.14.11.15.2.58.1.1.1.1,HPN-ICF-DHCPRELAY-MIB::hpnicfDHCPRIfSelectRelayMode,INTEGER,read-write,,current,on(1):off(2),If the value is on, the DHCP relay function would be enabled on this interface. 
.1.3.6.1.4.1.11.2.14.11.15.2.58.1.2,HPN-ICF-DHCPRELAY-MIB::hpnicfDHCPRIpToGroupTable,,not-accessible,,current,,A table for configuring ip addresses for DHCP server groups. 
.1.3.6.1.4.1.11.2.14.11.15.2.58.1.2.1,HPN-ICF-DHCPRELAY-MIB::hpnicfDHCPRIpToGroupEntry,,not-accessible,hpnicfDHCPRIpToGroupGroupId:hpnicfDHCPRIpToGroupServerIpType:hpnicfDHCPRIpToGroupServerIp,current,,An entry for configuring ip addresses for a DHCP server group. 
.1.3.6.1.4.1.11.2.14.11.15.2.58.1.2.1.1,HPN-ICF-DHCPRELAY-MIB::hpnicfDHCPRIpToGroupGroupId,Integer32,not-accessible,,current,,Group identifier of DHCP server group. 
.1.3.6.1.4.1.11.2.14.11.15.2.58.1.2.1.2,HPN-ICF-DHCPRELAY-MIB::hpnicfDHCPRIpToGroupServerIpType,INTEGER,not-accessible,,current,unknown(0):ipv4(1):ipv6(2):ipv4z(3):ipv6z(4):dns(16),Ip address type of DHCP server. 
.1.3.6.1.4.1.11.2.14.11.15.2.58.1.2.1.3,HPN-ICF-DHCPRELAY-MIB::hpnicfDHCPRIpToGroupServerIp,OCTET,not-accessible,,current,,Ip address of DHCP server. 
.1.3.6.1.4.1.11.2.14.11.15.2.58.1.2.1.4,HPN-ICF-DHCPRELAY-MIB::hpnicfDHCPRIpToGroupRowStatus,INTEGER,read-create,,current,active(1):notInService(2):notReady(3):createAndGo(4):createAndWait(5):destroy(6),Operation status of this table entry. Three actions are used: active, createAndGo, destroy. 
.1.3.6.1.4.1.11.2.14.11.15.2.58.1.3,HPN-ICF-DHCPRELAY-MIB::hpnicfDHCPRIfToGroupTable,,not-accessible,,current,,A table for configuring DHCP server groups for interfaces. 
.1.3.6.1.4.1.11.2.14.11.15.2.58.1.3.1,HPN-ICF-DHCPRELAY-MIB::hpnicfDHCPRIfToGroupEntry,,not-accessible,ifIndex,current,,An entry for configuring DHCP server group for an interface. 
.1.3.6.1.4.1.11.2.14.11.15.2.58.1.3.1.1,HPN-ICF-DHCPRELAY-MIB::hpnicfDHCPRIfToGroupGroupId,Integer32,read-write,,current,,The DHCP server group for this interface. 
.1.3.6.1.4.1.11.2.14.11.15.2.58.1.3.1.2,HPN-ICF-DHCPRELAY-MIB::hpnicfDHCPRIfToGroupRowStatus,INTEGER,read-create,,current,active(1):notInService(2):notReady(3):createAndGo(4):createAndWait(5):destroy(6),Operation status of this table entry. Three actions are used: active, createAndGo, destroy
.1.3.6.1.4.1.11.2.14.11.15.2.58.1.4,HPN-ICF-DHCPRELAY-MIB::hpnicfDHCPRAddrCheckTable,,not-accessible,,current,,A table containing the states of dhcp security address check switchs for interfaces. 
.1.3.6.1.4.1.11.2.14.11.15.2.58.1.4.1,HPN-ICF-DHCPRELAY-MIB::hpnicfDHCPRAddrCheckEntry,,not-accessible,ifIndex,current,,An entry containing the state of dhcp security address check switch for an interface. 
.1.3.6.1.4.1.11.2.14.11.15.2.58.1.4.1.1,HPN-ICF-DHCPRELAY-MIB::hpnicfDHCPRAddrCheckSwitch,INTEGER,read-write,,current,enabled(1):disabled(2),The state of dhcp security address check switch for this interface. It has two defined values: enabled and disabled. If the value is enabled, the address check function would be enabled. The default value is disabled. 
.1.3.6.1.4.1.11.2.14.11.15.2.58.1.5,HPN-ICF-DHCPRELAY-MIB::hpnicfDHCPRSecurityTable,,not-accessible,,current,,A table containing the information of DHCP security. 
.1.3.6.1.4.1.11.2.14.11.15.2.58.1.5.1,HPN-ICF-DHCPRELAY-MIB::hpnicfDHCPRSecurityEntry,,not-accessible,hpnicfDHCPRSecurityClientIpAddrType:hpnicfDHCPRSecurityClientIpAddr,current,,An entry containing the information of DHCP security. 
.1.3.6.1.4.1.11.2.14.11.15.2.58.1.5.1.1,HPN-ICF-DHCPRELAY-MIB::hpnicfDHCPRSecurityClientIpAddrType,INTEGER,not-accessible,,current,unknown(0):ipv4(1):ipv6(2):ipv4z(3):ipv6z(4):dns(16),DHCP client's net ip address type
.1.3.6.1.4.1.11.2.14.11.15.2.58.1.5.1.2,HPN-ICF-DHCPRELAY-MIB::hpnicfDHCPRSecurityClientIpAddr,OCTET,not-accessible,,current,,DHCP client's net ip address
.1.3.6.1.4.1.11.2.14.11.15.2.58.1.5.1.3,HPN-ICF-DHCPRELAY-MIB::hpnicfDHCPRSecurityClientMacAddr,OCTET,read-write,,current,,DHCP client's mac address
.1.3.6.1.4.1.11.2.14.11.15.2.58.1.5.1.4,HPN-ICF-DHCPRELAY-MIB::hpnicfDHCPRSecurityClientProperty,INTEGER,read-write,,current,static(1):dynamic(2),Property of client address
.1.3.6.1.4.1.11.2.14.11.15.2.58.1.5.1.5,HPN-ICF-DHCPRELAY-MIB::hpnicfDHCPRSecurityClientRowStatus,INTEGER,read-create,,current,active(1):notInService(2):notReady(3):createAndGo(4):createAndWait(5):destroy(6),Operation status of this table entry. Three actions are used: active, createAndGo, destroy
.1.3.6.1.4.1.11.2.14.11.15.2.58.1.6,HPN-ICF-DHCPRELAY-MIB::hpnicfDHCPRStatisticsGroup,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.2.58.1.6.1,HPN-ICF-DHCPRELAY-MIB::hpnicfDHCPRRxClientPktNum,Unsigned32,read-only,,current,,The total number of the packets received from DHCP clients by DHCP relay. 
.1.3.6.1.4.1.11.2.14.11.15.2.58.1.6.2,HPN-ICF-DHCPRELAY-MIB::hpnicfDHCPRTxClientPktNum,Unsigned32,read-only,,current,,The total number of the brodcast packets transmitted to DHCP clients by DHCP relay. 
.1.3.6.1.4.1.11.2.14.11.15.2.58.1.6.3,HPN-ICF-DHCPRELAY-MIB::hpnicfDHCPRRxServerPktNum,Unsigned32,read-only,,current,,The total number of the packets received from DHCP Servers by DHCP relay. 
.1.3.6.1.4.1.11.2.14.11.15.2.58.1.6.4,HPN-ICF-DHCPRELAY-MIB::hpnicfDHCPRTxServerPktNum,Unsigned32,read-only,,current,,The total number of the packets transmitted to DHCP Servers by DHCP relay. 
.1.3.6.1.4.1.11.2.14.11.15.2.58.1.6.5,HPN-ICF-DHCPRELAY-MIB::hpnicfDHCPRDiscoverPktNum,Unsigned32,read-only,,current,,The total number of the DHCP Discover packets handled by DHCP relay. 
.1.3.6.1.4.1.11.2.14.11.15.2.58.1.6.6,HPN-ICF-DHCPRELAY-MIB::hpnicfDHCPRRequestPktNum,Unsigned32,read-only,,current,,The total number of the DHCP Request packets handled by DHCP relay. 
.1.3.6.1.4.1.11.2.14.11.15.2.58.1.6.7,HPN-ICF-DHCPRELAY-MIB::hpnicfDHCPRDeclinePktNum,Unsigned32,read-only,,current,,The total number of the DHCP Decline packets handled by DHCP relay. 
.1.3.6.1.4.1.11.2.14.11.15.2.58.1.6.8,HPN-ICF-DHCPRELAY-MIB::hpnicfDHCPRReleasePktNum,Unsigned32,read-only,,current,,The total number of the DHCP Release packets handled by DHCP relay. 
.1.3.6.1.4.1.11.2.14.11.15.2.58.1.6.9,HPN-ICF-DHCPRELAY-MIB::hpnicfDHCPRInformPktNum,Unsigned32,read-only,,current,,The total number of the DHCP Inform packets handled by DHCP relay. 
.1.3.6.1.4.1.11.2.14.11.15.2.58.1.6.10,HPN-ICF-DHCPRELAY-MIB::hpnicfDHCPROfferPktNum,Unsigned32,read-only,,current,,The total number of the DHCP Offer packets handled by DHCP relay. 
.1.3.6.1.4.1.11.2.14.11.15.2.58.1.6.11,HPN-ICF-DHCPRELAY-MIB::hpnicfDHCPRAckPktNum,Unsigned32,read-only,,current,,The total number of the DHCP Ack packets handled by DHCP relay. 
.1.3.6.1.4.1.11.2.14.11.15.2.58.1.6.12,HPN-ICF-DHCPRELAY-MIB::hpnicfDHCPRNakPktNum,Unsigned32,read-only,,current,,The total number of the DHCP Nak packets handled by DHCP relay. 
.1.3.6.1.4.1.11.2.14.11.15.2.58.1.6.13,HPN-ICF-DHCPRELAY-MIB::hpnicfDHCPRStatisticsReset,INTEGER,read-write,,current,true(1):false(2),This node only supports set operation. If the value is true,it will clear all of the packet statistics. 
.1.3.6.1.4.1.11.2.14.11.15.2.58.1.7,HPN-ICF-DHCPRELAY-MIB::hpnicfDHCPRCycleGroup,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.2.58.1.7.1,HPN-ICF-DHCPRELAY-MIB::hpnicfDHCPRCycleStatus,INTEGER,read-write,,current,on(1):off(2),If the value is on, the cycle function would be enabled. 
.1.3.6.1.4.1.11.2.14.11.15.2.58.1.8,HPN-ICF-DHCPRELAY-MIB::hpnicfDHCPRConfigOption82Group,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.2.58.1.8.1,HPN-ICF-DHCPRELAY-MIB::hpnicfDHCPROption82Switch,INTEGER,read-write,,current,enabled(1):disabled(2),If the value is enabled, DHCP relay supporting option 82 function would be enabled. 
.1.3.6.1.4.1.11.2.14.11.15.2.58.1.8.2,HPN-ICF-DHCPRELAY-MIB::hpnicfDHCPROption82HandleStrategy,INTEGER,read-write,,current,drop(1):keep(2):replace(3),The strategies of DHCP relay handling option 82. 'drop' indicates DHCP relay discarding the request packet including option 82. 'keep' indicates DHCP relay accepting the request packet without any change of the option 82. 'replace' indicates DHCP relay accepting the request packet on condition that it generates a new option 82 to replace the original one. 
.1.3.6.1.4.1.11.2.14.11.15.2.58.1.8.3,HPN-ICF-DHCPRELAY-MIB::hpnicfDHCPRConfigOption82IfTable,,not-accessible,,current,,A table containing the information of DHCP option 82. This table depends on hpnicfDHCPRIfToGroupTable. An entry of this table will be created when an entry of hpnicfDHCPRIfToGroupTable is created. 
.1.3.6.1.4.1.11.2.14.11.15.2.58.1.8.3.1,HPN-ICF-DHCPRELAY-MIB::hpnicfDHCPRConfigOption82IfEntry,,not-accessible,ifIndex,current,,An entry containing the information of DHCP option 82. 
.1.3.6.1.4.1.11.2.14.11.15.2.58.1.8.3.1.1,HPN-ICF-DHCPRELAY-MIB::hpnicfDHCPROption82IfSwitch,INTEGER,read-write,,current,enabled(1):disabled(2),If DHCP relay supports option 82 functions, the value is 'enabled'. If DHCP relay does not support option 82 functions, the value is 'disabled'. 
.1.3.6.1.4.1.11.2.14.11.15.2.58.1.8.3.1.2,HPN-ICF-DHCPRELAY-MIB::hpnicfDHCPROption82IfStrategy,INTEGER,read-write,,current,drop(1):keep(2):replace(3),The strategies of DHCP relay handling option 82. 'drop' indicates DHCP relay discarding the request packet including option 82. 'keep' indicates DHCP relay accepting the request packet without any change of the option 82. 'replace' indicates DHCP relay accepting the request packet on condition that it generates a new option 82 to replace the original one. 
.1.3.6.1.4.1.11.2.14.11.15.2.58.1.8.3.1.3,HPN-ICF-DHCPRELAY-MIB::hpnicfDHCPROption82IfFormat,INTEGER,read-write,,current,normal(1):verbose(2),The format of DHCP relay option 82. 'normal' is the standard format. 'verbose' is the detailed format. 
.1.3.6.1.4.1.11.2.14.11.15.2.58.1.8.3.1.4,HPN-ICF-DHCPRELAY-MIB::hpnicfDHCPROption82IfNodeType,INTEGER,read-write,,current,invalid(1):mac(2):sysname(3):userdefine(4),Property of DHCP relay option 82 verbose format. The value can be set by user only when the value of hpnicfDHCPROption82IfFormat is set with 'verbose'. If the value of hpnicfDHCPROption82IfFormat is 'normal', the value is automatically set with 'invalid'. the value can not be set with 'invalid' by user. 'mac' indicates the option 82 verbose format is filled in with the mac of DHCP relay input interface. If the value of hpnicfDHCPROption82IfFormat is set with 'verbose', the value is automatically set with 'mac'. 'sysname' indicates the option 82 verbose format is filled in with the name of the DHCP relay. 'userdefine' indicates the option 82 verbose format is filled in with the string defined by user. If the value is set with 'userdefine', the value of hpnicfDHCPROption82IfUsrDefString must be set simultaneously. 
.1.3.6.1.4.1.11.2.14.11.15.2.58.1.8.3.1.5,HPN-ICF-DHCPRELAY-MIB::hpnicfDHCPROption82IfUsrDefString,OCTET,read-write,,current,,The string defined by user to fill in the option 82 verbose format. If the value of hpnicfDHCPROption82IfFormat is 'normal', or the value of hpnicfDHCPROption82IfNodeType is 'mac' or 'sysname', it is set with a null string automatically and can not be modified by user. It must be set with a non-zero length string when the value of hpnicfDHCPROption82IfNodeType is set with 'userdefine'. 
.1.3.6.1.4.1.11.2.14.11.15.2.59,HPN-ICF-OID-MIB::hpnicfIsis,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.2.60,HPN-ICF-OID-MIB::hpnicfRpr,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.2.60.1,HPN-ICF-RPR-MIB::hpnicfRprObjects,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.2.60.1.1,HPN-ICF-RPR-MIB::hpnicfRprMaxmumDefine,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.2.60.1.1.1,HPN-ICF-RPR-MIB::hpnicfRprMaxmumDefineTable,,not-accessible,,current,,This table contains the specs of RPR ring.
.1.3.6.1.4.1.11.2.14.11.15.2.60.1.1.1.1,HPN-ICF-RPR-MIB::hpnicfRprMaxmumDefineEntry,,not-accessible,hpnicfRprMaxMumIfIndex,current,,The entry of RPR Maximum Table.
.1.3.6.1.4.1.11.2.14.11.15.2.60.1.1.1.1.1,HPN-ICF-RPR-MIB::hpnicfRprMaxMumIfIndex,Integer32,not-accessible,,current,,The ifIndex of this RPR interface.
.1.3.6.1.4.1.11.2.14.11.15.2.60.1.1.1.1.2,HPN-ICF-RPR-MIB::hpnicfRprMaxStationNumDefine,INTEGER,read-only,,current,,Max station number supported by RPR ring.
.1.3.6.1.4.1.11.2.14.11.15.2.60.1.1.1.1.3,HPN-ICF-RPR-MIB::hpnicfRprMaxReservedRateDefine,Gauge32,read-only,,current,,Max reserved rate supported by each RPR ringlet. An estimate of the interface's current bandwidth in units of 1,000,000 bits per second. If this object reports a value of 'n' then the speed of the interface is somewhere in the range of 'n-500,000' to 'n+499,999'. For interfaces which do not vary in bandwidth or for those where no accurate estimation can be made, this object should contain the nominal bandwidth. For a sub-layer which has no concept of bandwidth, this object should be zero.
.1.3.6.1.4.1.11.2.14.11.15.2.60.1.2,HPN-ICF-RPR-MIB::hpnicfRprTopoImage,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.2.60.1.2.1,HPN-ICF-RPR-MIB::hpnicfRprTopoImageXTable,,not-accessible,,current,,This table contains additional objects for the rprTopoImageTable in IEEE-802DOT17-RPR-MIB.
.1.3.6.1.4.1.11.2.14.11.15.2.60.1.2.1.1,HPN-ICF-RPR-MIB::hpnicfRprTopoImageXEntry,,not-accessible,,current,,Each entry contains information specific to a particular station on the ring. The table has at least one entry for the station itself, this entry indicates zero hops on each ringlet.
.1.3.6.1.4.1.11.2.14.11.15.2.60.1.2.1.1.3,HPN-ICF-RPR-MIB::hpnicfRprTopoImageXWestEdgeStatus,INTEGER,read-only,,current,true(1):false(2),The current edge status of the west span. If an edge exists,the hpnicfRprTopoImageXWestEdgeStatus is true. Otherwise, the hpnicfRprTopoImageXWestEdgeStatus is false.
.1.3.6.1.4.1.11.2.14.11.15.2.60.1.2.1.1.4,HPN-ICF-RPR-MIB::hpnicfRprTopoImageXEastEdgeStatus,INTEGER,read-only,,current,true(1):false(2),The current edge status of the east span. If an edge exists, the hpnicfRprTopoImageXEastEdgeStatus is true. Otherwise, the hpnicfRprTopoImageXEastEdgeStatus is false.
.1.3.6.1.4.1.11.2.14.11.15.2.60.1.2.1.1.5,HPN-ICF-RPR-MIB::hpnicfRprTopoImageXStationName,OCTET,read-write,,current,,The operator assigned station name. The operator can assigned it by hpnicfRprTopoImageXStationName.
.1.3.6.1.4.1.11.2.14.11.15.2.60.1.3,HPN-ICF-RPR-MIB::hpnicfRprSpanCounters,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.2.60.1.3.1,HPN-ICF-RPR-MIB::hpnicfRprSrcMacCountTable,,not-accessible,,current,,The RPR Source Mac Count Table contains the cumulative sum of frames and octects from the particular source station.
.1.3.6.1.4.1.11.2.14.11.15.2.60.1.3.1.1,HPN-ICF-RPR-MIB::hpnicfRprSrcMacCountEntry,,not-accessible,hpnicfRprSrcMacCountIfIndex:hpnicfRprSrcMacCountBySrcAddress,current,,An entry in the RPR Source Mac Count Table.
.1.3.6.1.4.1.11.2.14.11.15.2.60.1.3.1.1.1,HPN-ICF-RPR-MIB::hpnicfRprSrcMacCountIfIndex,Integer32,not-accessible,,current,,The ifIndex of this RPR interface.
.1.3.6.1.4.1.11.2.14.11.15.2.60.1.3.1.1.2,HPN-ICF-RPR-MIB::hpnicfRprSrcMacCountBySrcAddress,,not-accessible,,current,,MAC address of the source station where the frames come from.
.1.3.6.1.4.1.11.2.14.11.15.2.60.1.3.1.1.3,HPN-ICF-RPR-MIB::hpnicfRprSrcMacCountReceivedFrames,Counter64,read-only,,current,,Frames received from a particular MAC address of source station.
.1.3.6.1.4.1.11.2.14.11.15.2.60.1.3.1.1.4,HPN-ICF-RPR-MIB::hpnicfRprSrcMacCountReceivedOctets,Counter64,read-only,,current,,Octets received from a particular MAC address of source station.
.1.3.6.1.4.1.11.2.14.11.15.2.60.1.3.2,HPN-ICF-RPR-MIB::hpnicfRprDestMacCountTable,,not-accessible,,current,,The RPR Destination MAC Count Table contains the cumulative sum of frames and octects to the particular destination station.
.1.3.6.1.4.1.11.2.14.11.15.2.60.1.3.2.1,HPN-ICF-RPR-MIB::hpnicfRprDestMacCountEntry,,not-accessible,hpnicfRprDestMacCountIfIndex:hpnicfRprDestMacCountByDestAddress,current,,An entry in the RPR MAC Destination Count Table.
.1.3.6.1.4.1.11.2.14.11.15.2.60.1.3.2.1.1,HPN-ICF-RPR-MIB::hpnicfRprDestMacCountIfIndex,Integer32,not-accessible,,current,,The ifIndex of RPR interface.
.1.3.6.1.4.1.11.2.14.11.15.2.60.1.3.2.1.2,HPN-ICF-RPR-MIB::hpnicfRprDestMacCountByDestAddress,,not-accessible,,current,,MAC address of the destination station where the frames are sent to.
.1.3.6.1.4.1.11.2.14.11.15.2.60.1.3.2.1.3,HPN-ICF-RPR-MIB::hpnicfRprDestMacCountReceivedFrames,Counter64,read-only,,current,,Frames sent to a particular MAC address of destination station.
.1.3.6.1.4.1.11.2.14.11.15.2.60.1.3.2.1.4,HPN-ICF-RPR-MIB::hpnicfRprDestMacCountReceivedOctets,Counter64,read-only,,current,,Octets sent to a particular MAC address of destination station.
.1.3.6.1.4.1.11.2.14.11.15.2.60.1.3.3,HPN-ICF-RPR-MIB::hpnicfRprPktDropCountTable,,not-accessible,,current,,The RPR Packet Drop Count Table contains the cumulative sum of packets dropped for congestion.
.1.3.6.1.4.1.11.2.14.11.15.2.60.1.3.3.1,HPN-ICF-RPR-MIB::hpnicfRprPktDropCountEntry,,not-accessible,hpnicfRprPktDropCntIfIndex:hpnicfRprPktDropCntRingletID,current,,An entry in the RPR Packet Drop Count Table.
.1.3.6.1.4.1.11.2.14.11.15.2.60.1.3.3.1.1,HPN-ICF-RPR-MIB::hpnicfRprPktDropCntIfIndex,Integer32,not-accessible,,current,,The ifIndex of this RPR interface.
.1.3.6.1.4.1.11.2.14.11.15.2.60.1.3.3.1.2,HPN-ICF-RPR-MIB::hpnicfRprPktDropCntRingletID,INTEGER,not-accessible,,current,ringlet0(1):ringlet1(2),The RPR Ringlet of the station through which the packets transmit.
.1.3.6.1.4.1.11.2.14.11.15.2.60.1.3.3.1.3,HPN-ICF-RPR-MIB::hpnicfRprDownFlowClassAPktDrops,Counter64,read-only,,current,,The total dropped number of Class A packets which transmit down from the host.
.1.3.6.1.4.1.11.2.14.11.15.2.60.1.3.3.1.4,HPN-ICF-RPR-MIB::hpnicfRprUpFlowClassAPktDrops,Counter64,read-only,,current,,The total dropped number of Class A packets which transmit up to the host.
.1.3.6.1.4.1.11.2.14.11.15.2.60.1.3.3.1.5,HPN-ICF-RPR-MIB::hpnicfRprDownFlowClassBPktDrops,Counter64,read-only,,current,,The total dropped number of Class B packets which transmit down from the host.
.1.3.6.1.4.1.11.2.14.11.15.2.60.1.3.3.1.6,HPN-ICF-RPR-MIB::hpnicfRprUpFlowClassBPktDrops,Counter64,read-only,,current,,The total dropped number of Class B packets which transmit up to the host.
.1.3.6.1.4.1.11.2.14.11.15.2.60.1.3.3.1.7,HPN-ICF-RPR-MIB::hpnicfRprDownFlowClassCPktDrops,Counter64,read-only,,current,,The total dropped number of Class C packets which transmit down from the host.
.1.3.6.1.4.1.11.2.14.11.15.2.60.1.3.3.1.8,HPN-ICF-RPR-MIB::hpnicfRprUpFlowClassCPktDrops,Counter64,read-only,,current,,The total dropped number of Class C packets which transmit up to the host.
.1.3.6.1.4.1.11.2.14.11.15.2.60.1.4,HPN-ICF-RPR-MIB::hpnicfRprRS,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.2.60.1.4.1,HPN-ICF-RPR-MIB::hpnicfRprStaticRSTable,,not-accessible,,current,,The RPR Static Ring Selection table contains the static ring selection information by the way of configuration.
.1.3.6.1.4.1.11.2.14.11.15.2.60.1.4.1.1,HPN-ICF-RPR-MIB::hpnicfRprStaticRSEntry,,not-accessible,hpnicfRprStaticRSIfIndex:hpnicfRprStaticRSMacAddress,current,,An entry in the RPR Static Ring Selection table.
.1.3.6.1.4.1.11.2.14.11.15.2.60.1.4.1.1.1,HPN-ICF-RPR-MIB::hpnicfRprStaticRSIfIndex,Integer32,not-accessible,,current,,The ifIndex of RPR interface.
.1.3.6.1.4.1.11.2.14.11.15.2.60.1.4.1.1.2,HPN-ICF-RPR-MIB::hpnicfRprStaticRSMacAddress,,not-accessible,,current,,The MAC address of the station on the ring.
.1.3.6.1.4.1.11.2.14.11.15.2.60.1.4.1.1.3,HPN-ICF-RPR-MIB::hpnicfRprStaticRSRingletID,INTEGER,read-create,,current,ringlet0(1):ringlet1(2),The identifier of the ring which frames are sent from one station to another. Ringlet0 refers to outer ring, while ringlet1 does inner.
.1.3.6.1.4.1.11.2.14.11.15.2.60.1.4.1.1.4,HPN-ICF-RPR-MIB::hpnicfRprStaticRSTtl,INTEGER,read-only,,current,,The hops from source station to destination station by the selected ringlet.
.1.3.6.1.4.1.11.2.14.11.15.2.60.1.4.1.1.5,HPN-ICF-RPR-MIB::hpnicfRprStaticRSValid,INTEGER,read-only,,current,true(1):false(2),The flag identify whether the configed ringlet is valid. If it is true, the configed ringlet is valid, otherwise it's invalid.
.1.3.6.1.4.1.11.2.14.11.15.2.60.1.4.1.1.6,HPN-ICF-RPR-MIB::hpnicfRprStaticRSRowStatus,INTEGER,read-create,,current,active(1):notInService(2):notReady(3):createAndGo(4):createAndWait(5):destroy(6),The status of this table entry. The status includes createAndGo, active and destroy.
.1.3.6.1.4.1.11.2.14.11.15.2.60.1.4.2,HPN-ICF-RPR-MIB::hpnicfRprIpv4DynamicRSTable,,not-accessible,,current,,The RPR Ipv4Dynamic Ring Selection Table that contains the dynamic ring selection information by shortest path.
.1.3.6.1.4.1.11.2.14.11.15.2.60.1.4.2.1,HPN-ICF-RPR-MIB::hpnicfRprIpv4DynamicRSEntry,,not-accessible,hpnicfRprIpv4DynamicRSIfIndex:hpnicfRprIpv4DynamicRSMacAddress,current,,An entry in the RPR Ipv4Dynamic Ring Selection Table.
.1.3.6.1.4.1.11.2.14.11.15.2.60.1.4.2.1.1,HPN-ICF-RPR-MIB::hpnicfRprIpv4DynamicRSIfIndex,Integer32,not-accessible,,current,,The ifIndex of RPR interface.
.1.3.6.1.4.1.11.2.14.11.15.2.60.1.4.2.1.2,HPN-ICF-RPR-MIB::hpnicfRprIpv4DynamicRSMacAddress,,not-accessible,,current,,The Ipv4 MAC address of destination station on the ring.
.1.3.6.1.4.1.11.2.14.11.15.2.60.1.4.2.1.3,HPN-ICF-RPR-MIB::hpnicfRprIpv4DynamicRSRingletID,INTEGER,read-only,,current,ringlet0(1):ringlet1(2),The identifier of the ring which frames are sent from the source station to the destination station.
.1.3.6.1.4.1.11.2.14.11.15.2.60.1.4.2.1.4,HPN-ICF-RPR-MIB::hpnicfRprIpv4DynamicRSTtl,INTEGER,read-only,,current,,The hops from source station to destination station by the selected ringlet.
.1.3.6.1.4.1.11.2.14.11.15.2.60.1.4.3,HPN-ICF-RPR-MIB::hpnicfRprIpv6DynamicRSTable,,not-accessible,,current,,The RPR Ipv6 Dynamic Ring Selection Table that contains the Ipv6 ring selection information by dynamic ring selection and static ring selection.
.1.3.6.1.4.1.11.2.14.11.15.2.60.1.4.3.1,HPN-ICF-RPR-MIB::hpnicfRprIpv6DynamicRSEntry,,not-accessible,hpnicfRprIpv6DynamicRSIfIndex:hpnicfRprIpv6DynamicRSMacAddress,current,,An entry in the RPR Ipv6 Ring Selection Table.
.1.3.6.1.4.1.11.2.14.11.15.2.60.1.4.3.1.1,HPN-ICF-RPR-MIB::hpnicfRprIpv6DynamicRSIfIndex,Integer32,not-accessible,,current,,The ifIndex of RPR interface.
.1.3.6.1.4.1.11.2.14.11.15.2.60.1.4.3.1.2,HPN-ICF-RPR-MIB::hpnicfRprIpv6DynamicRSMacAddress,,not-accessible,,current,,The Ipv6 MAC address of the destination station on the ring.
.1.3.6.1.4.1.11.2.14.11.15.2.60.1.4.3.1.3,HPN-ICF-RPR-MIB::hpnicfRprIpv6DynamicRSRingletID,INTEGER,read-only,,current,ringlet0(1):ringlet1(2),The identifier of the ring which frames are sent from the source station to the destination station.
.1.3.6.1.4.1.11.2.14.11.15.2.60.1.4.3.1.4,HPN-ICF-RPR-MIB::hpnicfRprIpv6DynamicRSTtl,INTEGER,read-only,,current,,The hops from source station to destination station by selected ringlet.
.1.3.6.1.4.1.11.2.14.11.15.2.60.1.4.4,HPN-ICF-RPR-MIB::hpnicfRprIpv4OverallRSTable,,not-accessible,,current,,The RPR Ipv4 Overall Ring Selection Table that contains the overall and active ring selection infomation by dynamic ring selection and static ring selection.
.1.3.6.1.4.1.11.2.14.11.15.2.60.1.4.4.1,HPN-ICF-RPR-MIB::hpnicfRprIpv4OverallRSEntry,,not-accessible,hpnicfRprIpv4OverallRSIfIndex:hpnicfRprIpv4OverallRSMacAddress,current,,An entry in the RPR Overall Ring Selection Table.
.1.3.6.1.4.1.11.2.14.11.15.2.60.1.4.4.1.1,HPN-ICF-RPR-MIB::hpnicfRprIpv4OverallRSIfIndex,Integer32,not-accessible,,current,,The ifIndex of RPR interface.
.1.3.6.1.4.1.11.2.14.11.15.2.60.1.4.4.1.2,HPN-ICF-RPR-MIB::hpnicfRprIpv4OverallRSMacAddress,,not-accessible,,current,,The MAC address of the destination station on the ring.
.1.3.6.1.4.1.11.2.14.11.15.2.60.1.4.4.1.3,HPN-ICF-RPR-MIB::hpnicfRprIpv4OverallRSType,INTEGER,read-only,,current,static(1):dynamic(2),The ring selection item type indicates static or dynamic.
.1.3.6.1.4.1.11.2.14.11.15.2.60.1.4.4.1.4,HPN-ICF-RPR-MIB::hpnicfRprIpv4OverallRSRingletID,INTEGER,read-only,,current,ringlet0(1):ringlet1(2),The identifier of the ring which frames are sent from the source station to the destination station.
.1.3.6.1.4.1.11.2.14.11.15.2.60.1.4.4.1.5,HPN-ICF-RPR-MIB::hpnicfRprIpv4OverallRSTtl,INTEGER,read-only,,current,,The hops from source station to destination station by selected ringlet.
.1.3.6.1.4.1.11.2.14.11.15.2.60.1.4.5,HPN-ICF-RPR-MIB::hpnicfRprVrrpRSTable,,not-accessible,,current,,The RPR VRRP Ring Selection Table that contains the ring selection information when the vrrp group is configured.
.1.3.6.1.4.1.11.2.14.11.15.2.60.1.4.5.1,HPN-ICF-RPR-MIB::hpnicfRprVrrpRSEntry,,not-accessible,hpnicfRprVrrpRSIfIndex:hpnicfRprVrrpRSVirtualMacAddress,current,,An entry in the RPR VRRP Ring Selection Table.
.1.3.6.1.4.1.11.2.14.11.15.2.60.1.4.5.1.1,HPN-ICF-RPR-MIB::hpnicfRprVrrpRSIfIndex,Integer32,not-accessible,,current,,The ifIndex of RPR interface.
.1.3.6.1.4.1.11.2.14.11.15.2.60.1.4.5.1.2,HPN-ICF-RPR-MIB::hpnicfRprVrrpRSVirtualMacAddress,,not-accessible,,current,,The virtual MAC address of the staion in VRRP group.
.1.3.6.1.4.1.11.2.14.11.15.2.60.1.4.5.1.3,HPN-ICF-RPR-MIB::hpnicfRprVrrpRSMacAddress,,read-only,,current,,The MAC address of the station that is the master in VRRP group.
.1.3.6.1.4.1.11.2.14.11.15.2.60.1.4.5.1.4,HPN-ICF-RPR-MIB::hpnicfRprVrrpRSRingletID,INTEGER,read-only,,current,ringlet0(1):ringlet1(2),The identifier of the ring which frames are sent from the source station to the destination station.
.1.3.6.1.4.1.11.2.14.11.15.2.60.1.4.5.1.5,HPN-ICF-RPR-MIB::hpnicfRprVrrpRSTtl,INTEGER,read-only,,current,,The hops from source station to destination station by selected ringlet.
.1.3.6.1.4.1.11.2.14.11.15.2.60.1.4.6,HPN-ICF-RPR-MIB::hpnicfRprDefaultRingIDTable,,not-accessible,,current,,The RPR Default RingID Table specify the default ringID.
.1.3.6.1.4.1.11.2.14.11.15.2.60.1.4.6.1,HPN-ICF-RPR-MIB::hpnicfRprDefaultRingIDEntry,,not-accessible,hpnicfRprDefaultRingIDIfIndex,current,,An entry in the RPR Default RingID Table.
.1.3.6.1.4.1.11.2.14.11.15.2.60.1.4.6.1.1,HPN-ICF-RPR-MIB::hpnicfRprDefaultRingIDIfIndex,Integer32,not-accessible,,current,,The ifIndex of RPR interface.
.1.3.6.1.4.1.11.2.14.11.15.2.60.1.4.6.1.2,HPN-ICF-RPR-MIB::hpnicfRprDefaultConfigRingletID,INTEGER,read-write,,current,ringlet0(1):ringlet1(2),The default identifier of the ring configured by user.
.1.3.6.1.4.1.11.2.14.11.15.2.60.1.4.6.1.3,HPN-ICF-RPR-MIB::hpnicfRprDefaultActiveRingID,INTEGER,read-only,,current,ringlet0(1):ringlet1(2),The identifier of the default ring which is active currently. The default ring configured by user may be inactive.
.1.3.6.1.4.1.11.2.14.11.15.2.60.1.5,HPN-ICF-RPR-MIB::hpnicfRprDefect,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.2.60.1.5.1,HPN-ICF-RPR-MIB::hpnicfRprDefectReportTable,,not-accessible,,current,,The RPR Defect Report Table that contains the trap information on the ring.
.1.3.6.1.4.1.11.2.14.11.15.2.60.1.5.1.1,HPN-ICF-RPR-MIB::hpnicfRprDefectReportEntry,,not-accessible,hpnicfRprDefectIfIndex,current,,An entry in the RPR Defect Report Table.
.1.3.6.1.4.1.11.2.14.11.15.2.60.1.5.1.1.1,HPN-ICF-RPR-MIB::hpnicfRprDefectIfIndex,Integer32,not-accessible,,current,,The ifIndex of RPR interface.
.1.3.6.1.4.1.11.2.14.11.15.2.60.1.5.1.1.2,HPN-ICF-RPR-MIB::hpnicfRprDefectCurrentStatus,BITS,read-only,,current,topologyOpenRing(0):topoInstability(1):topoInconsistent(2):dulpMacAddress(3):dulpIPAddress(4):lrttDefect(5):protCfgDefect(6):jumboCfgDefect(7):excessReservedRateDefect(8):excessMaxStationNum(9):miscabling(10):backPressure(11),Indicates the current status of RPR ring. This attribute is used to notify the management system that alarms generate or clear about some RPR ring.
.1.3.6.1.4.1.11.2.14.11.15.2.60.1.6,HPN-ICF-RPR-MIB::hpnicfRprPriorityMap,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.2.60.1.6.1,HPN-ICF-RPR-MIB::hpnicfRprPriority2ClassMapTable,,not-accessible,,current,,The Table is for Class Of Service and RPR Service Class Mapping.
.1.3.6.1.4.1.11.2.14.11.15.2.60.1.6.1.1,HPN-ICF-RPR-MIB::hpnicfRprPriority2ClassMapEntry,,not-accessible,hpnicfRprPriority2ClassMapIfIndex:hpnicfRprPriority2ClassMapType:hpnicfRprPriorityValue,current,,An entry in the COS to Service Class Map Table.
.1.3.6.1.4.1.11.2.14.11.15.2.60.1.6.1.1.1,HPN-ICF-RPR-MIB::hpnicfRprPriority2ClassMapIfIndex,Integer32,not-accessible,,current,,The ifIndex of RPR interface.
.1.3.6.1.4.1.11.2.14.11.15.2.60.1.6.1.1.2,HPN-ICF-RPR-MIB::hpnicfRprPriority2ClassMapType,INTEGER,not-accessible,,current,tag(1):mpls(2):ip(3),The type of Priority,include tag, mpls, ip.
.1.3.6.1.4.1.11.2.14.11.15.2.60.1.6.1.1.3,HPN-ICF-RPR-MIB::hpnicfRprPriorityValue,INTEGER,not-accessible,,current,pri0(1):pri1(2):pri2(3):pri3(4):pri4(5):pri5(6):pri6(7):pri7(8),The priority of tag,mpls and ip, the value range is 0~7.
.1.3.6.1.4.1.11.2.14.11.15.2.60.1.6.1.1.4,HPN-ICF-RPR-MIB::hpnicfRprPriority2ClassMap,INTEGER,read-write,,current,classC(1):classB(2):classA1(3):classA0(4),The RPR service class.
.1.3.6.1.4.1.11.2.14.11.15.2.60.1.7,HPN-ICF-RPR-MIB::hpnicfRprRateLimitConfig,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.2.60.1.7.1,HPN-ICF-RPR-MIB::hpnicfRprRateLimitConfigTable,,not-accessible,,current,,The RPR Rate Limit Configuration Table that contains the rate limit infomation of RPR serviec class.
.1.3.6.1.4.1.11.2.14.11.15.2.60.1.7.1.1,HPN-ICF-RPR-MIB::hpnicfRprRateLimitConfigEntry,,not-accessible,hpnicfRprRateLimitConfigIfIndex:hpnicfRprRateLimitConfigRingletId:hpnicfRprRateLimitConfigServiceClass,current,,An entry in the RPR Rate Limit Configuration Table.
.1.3.6.1.4.1.11.2.14.11.15.2.60.1.7.1.1.1,HPN-ICF-RPR-MIB::hpnicfRprRateLimitConfigIfIndex,Integer32,not-accessible,,current,,The ifIndex of RPR interface.
.1.3.6.1.4.1.11.2.14.11.15.2.60.1.7.1.1.2,HPN-ICF-RPR-MIB::hpnicfRprRateLimitConfigRingletId,INTEGER,not-accessible,,current,ringlet0(1):ringlet1(2),The identifier of the ring of RPR ringlet.
.1.3.6.1.4.1.11.2.14.11.15.2.60.1.7.1.1.3,HPN-ICF-RPR-MIB::hpnicfRprRateLimitConfigServiceClass,INTEGER,not-accessible,,current,classC(1):classB(2):classA1(3):classA0(4),The RPR service class.
.1.3.6.1.4.1.11.2.14.11.15.2.60.1.7.1.1.4,HPN-ICF-RPR-MIB::hpnicfRprRateLimitConfigValue,Integer32,read-write,,current,,The value of rate-limit that configured for diffrent service class. The unit is permillage.
.1.3.6.1.4.1.11.2.14.11.15.2.60.1.8,HPN-ICF-RPR-MIB::hpnicfRprMacAddrLearn,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.2.60.1.8.1,HPN-ICF-RPR-MIB::hpnicfRprMacLearnCfgTable,,not-accessible,,current,,The RPR MAC Address Table.
.1.3.6.1.4.1.11.2.14.11.15.2.60.1.8.1.1,HPN-ICF-RPR-MIB::hpnicfRprMacLearnCfgEntry,,not-accessible,hpnicfRprMacLearnIfIndex:hpnicfRprMacLearnRprMac,current,,The entry of RPR MAC Address Table.
.1.3.6.1.4.1.11.2.14.11.15.2.60.1.8.1.1.1,HPN-ICF-RPR-MIB::hpnicfRprMacLearnIfIndex,Integer32,not-accessible,,current,,The ifIndex of RPR interface.
.1.3.6.1.4.1.11.2.14.11.15.2.60.1.8.1.1.2,HPN-ICF-RPR-MIB::hpnicfRprMacLearnRprMac,,not-accessible,,current,,The MAC address of the RPR station.
.1.3.6.1.4.1.11.2.14.11.15.2.60.1.8.1.1.3,HPN-ICF-RPR-MIB::hpnicfRprMacLearnType,INTEGER,read-create,,current,,The type of MAC address item that the user built. The type includes static and dynamic.
.1.3.6.1.4.1.11.2.14.11.15.2.60.1.8.1.1.4,HPN-ICF-RPR-MIB::hpnicfRprMacLearnDestMac,,read-create,,current,,The destination of MAC address.
.1.3.6.1.4.1.11.2.14.11.15.2.60.1.8.1.1.5,HPN-ICF-RPR-MIB::hpnicfRprMacLearnVlanId,Integer32,read-create,,current,,The vlan ID that the MAC address learned from by RPR staion.
.1.3.6.1.4.1.11.2.14.11.15.2.60.1.8.1.1.6,HPN-ICF-RPR-MIB::hpnicfRprMacLearnRinglet,INTEGER,read-create,,current,ringlet0(1):ringlet1(2),The identifier of the ring which frames are sent from the source station to the destination station.
.1.3.6.1.4.1.11.2.14.11.15.2.60.1.8.1.1.7,HPN-ICF-RPR-MIB::hpnicfRprMacLearnTtl,INTEGER,read-only,,current,,The hops from source station to destination station on the selected ringlet.
.1.3.6.1.4.1.11.2.14.11.15.2.60.1.8.1.1.8,HPN-ICF-RPR-MIB::hpnicfRprMacLearnIsValid,INTEGER,read-only,,current,true(1):false(2),The flag identify whether the configured mac address is valid. If it is true, the configured mac address is valid, otherwise it's invalid.
.1.3.6.1.4.1.11.2.14.11.15.2.60.1.8.1.1.9,HPN-ICF-RPR-MIB::hpnicfRprMacLearnRowStatus,INTEGER,read-create,,current,active(1):notInService(2):notReady(3):createAndGo(4):createAndWait(5):destroy(6),The status of this table entry. The status includes createAndGo, active and destroy.
.1.3.6.1.4.1.11.2.14.11.15.2.60.1.9,HPN-ICF-RPR-MIB::hpnicfRprTrapVar,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.2.60.1.9.1,HPN-ICF-RPR-MIB::hpnicfRprTrapVarTable,,not-accessible,,current,,The RPR Defect Report Table that contains varible that used to bind in trap.
.1.3.6.1.4.1.11.2.14.11.15.2.60.1.9.1.1,HPN-ICF-RPR-MIB::hpnicfRprTrapVarEntry,,not-accessible,hpnicfRprTrapIfIndex,current,,An entry in the RPR Trap Var Table.
.1.3.6.1.4.1.11.2.14.11.15.2.60.1.9.1.1.1,HPN-ICF-RPR-MIB::hpnicfRprTrapIfIndex,Integer32,accessible-for-notify,,current,,The ifIndex of RPR interface. It is only used for trap to bind.
.1.3.6.1.4.1.11.2.14.11.15.2.60.1.9.1.1.2,HPN-ICF-RPR-MIB::hpnicfRprTrapRinglet,INTEGER,accessible-for-notify,,current,ringlet0(1):ringlet1(2),The span of RPR station. It is only used for trap to bind.
.1.3.6.1.4.1.11.2.14.11.15.2.60.1.9.1.1.3,HPN-ICF-RPR-MIB::hpnicfRprTrapTopoMacAddress,,accessible-for-notify,,current,,The MAC address of RPR station. It is only used for trap to bind.
.1.3.6.1.4.1.11.2.14.11.15.2.60.1.9.1.1.4,HPN-ICF-RPR-MIB::hpnicfRprTrapIpAddress,,accessible-for-notify,,current,,The IP address of RPR station. It is only used for trap to bind.
.1.3.6.1.4.1.11.2.14.11.15.2.60.1.10,HPN-ICF-RPR-MIB::hpnicfRprTrap,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.2.60.1.10.1,HPN-ICF-RPR-MIB::hpnicfRprTopologyOpenRing,,,,,,The topology openRing trap indicates that the RPR ring is opened.
.1.3.6.1.4.1.11.2.14.11.15.2.60.1.10.2,HPN-ICF-RPR-MIB::hpnicfRprTopologyCloseRing,,,,,,The topology openRing trap indicates that the RPR ring is closed.
.1.3.6.1.4.1.11.2.14.11.15.2.60.1.10.3,HPN-ICF-RPR-MIB::hpnicfRprTopologyInconsistent,,,,,,The topology inconsistent trap indicates that the topology of RPR is inconsistent.
.1.3.6.1.4.1.11.2.14.11.15.2.60.1.10.4,HPN-ICF-RPR-MIB::hpnicfRprTopologyInstability,,,,,,The topology instability trap indicates that the topology of RPR is instability.
.1.3.6.1.4.1.11.2.14.11.15.2.60.1.10.5,HPN-ICF-RPR-MIB::hpnicfRprDuplicateMacAddress,,,,,,The duplicate MAC address trap indicates that the mac address of the station on the ring is dulplicate. That means there is the same MAC address between two stations on the ring.
.1.3.6.1.4.1.11.2.14.11.15.2.60.1.10.6,HPN-ICF-RPR-MIB::hpnicfRprDulplicateIPAddress,,,,,,The dulplicate IP address trap indicates that the IP address of the station on the ring is dulplicate. That means there is the same IP address between two stations on the ring.
.1.3.6.1.4.1.11.2.14.11.15.2.60.1.10.7,HPN-ICF-RPR-MIB::hpnicfRprIncompleteLRTT,,,,,,The incomplete LRTT trap indicates that LRTT is not completed.
.1.3.6.1.4.1.11.2.14.11.15.2.60.1.10.8,HPN-ICF-RPR-MIB::hpnicfRprProtecConfigInconsistent,,,,,,The protection configuration inconsistent trap indicates that the configuration of protection mode on the ring is inconsistent. That is one station is configured steer mode while the other is configured wrap mode.
.1.3.6.1.4.1.11.2.14.11.15.2.60.1.10.9,HPN-ICF-RPR-MIB::hpnicfRprJumboConfigInconsistent,,,,,,The jumbo configuration inconsistent trap indicates that the configuration of jumbo mode on the ring is inconsistent. That is one station supports jumbo frame while the other doesn't support jumbo frame.
.1.3.6.1.4.1.11.2.14.11.15.2.60.1.10.10,HPN-ICF-RPR-MIB::hpnicfRprExceedMaxReservRate,,,,,,The exceeded max reserved rate trap indicates that the rate on the ringlet exceeded the max reserved rate. The operator can configure reserved rate for every station, but the sum of all stations' reserved rate of each RPR ringlet can't exceed maximum.
.1.3.6.1.4.1.11.2.14.11.15.2.60.1.10.11,HPN-ICF-RPR-MIB::hpnicfRprExceedMaxStationNum,,,,,,The exceeded max station number trap indicates that the number of the stations on the ring exceeded the max station number.
.1.3.6.1.4.1.11.2.14.11.15.2.60.1.10.12,HPN-ICF-RPR-MIB::hpnicfRprMiscabling,,,,,,The miscabling trap indicates that the miscabling event occurred.
.1.3.6.1.4.1.11.2.14.11.15.2.60.1.10.13,HPN-ICF-RPR-MIB::hpnicfRprBackPressure,,,,,,The back pressure trap indicates that the backpressure is generated on the ringlet. That is the data flow on the ringlet exceeded the range of rate-limit configured.
.1.3.6.1.4.1.11.2.14.11.15.2.60.1.10.14,HPN-ICF-RPR-MIB::hpnicfRprBackPressureOver,,,,,,The back pressure over trap indicates that the backpressure is disappeared on the ringlet.
.1.3.6.1.4.1.11.2.14.11.15.2.61,HPN-ICF-OID-MIB::hpnicfSubnetVlan,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.2.61.1,HPN-ICF-SUBNET-VLAN-MIB::hpnicfSubnetVlanObjects,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.2.61.1.1,HPN-ICF-SUBNET-VLAN-MIB::hpnicfSubnetVlanScalarObjects,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.2.61.1.1.1,HPN-ICF-SUBNET-VLAN-MIB::hpnicfSubnetNumAllVlan,Integer32,read-only,,current,,The maximum number of subnets that can be configured on all VLANs.
.1.3.6.1.4.1.11.2.14.11.15.2.61.1.1.2,HPN-ICF-SUBNET-VLAN-MIB::hpnicfSubnetNumPerVlan,Integer32,read-only,,current,,The maximum number of subnets that can be configured on each VLAN.
.1.3.6.1.4.1.11.2.14.11.15.2.61.1.1.3,HPN-ICF-SUBNET-VLAN-MIB::hpnicfSubnetNumAllPort,Integer32,read-only,,current,,The maximum number of subnets that can be applied to all ports.
.1.3.6.1.4.1.11.2.14.11.15.2.61.1.1.4,HPN-ICF-SUBNET-VLAN-MIB::hpnicfSubnetNumPerPort,Integer32,read-only,,current,,The maximum number of subnets that can be applied to each port.
.1.3.6.1.4.1.11.2.14.11.15.2.61.1.2,HPN-ICF-SUBNET-VLAN-MIB::hpnicfSubnetVlanTable,,not-accessible,,current,,Subnet-based VLAN configuration table.
.1.3.6.1.4.1.11.2.14.11.15.2.61.1.2.1,HPN-ICF-SUBNET-VLAN-MIB::hpnicfSubnetVlanEntry,,not-accessible,hpnicfSubnetVlanVlanId:hpnicfSubnetVlanSubnetIndex,current,,Subnet-based VLAN configuration entry.
.1.3.6.1.4.1.11.2.14.11.15.2.61.1.2.1.1,HPN-ICF-SUBNET-VLAN-MIB::hpnicfSubnetVlanVlanId,Integer32,not-accessible,,current,,Vlan id.
.1.3.6.1.4.1.11.2.14.11.15.2.61.1.2.1.2,HPN-ICF-SUBNET-VLAN-MIB::hpnicfSubnetVlanSubnetIndex,Integer32,not-accessible,,current,,The subnet index value of a row in this table is from zero to the value of hpnicfSubnetNumPerVlan subtracting one.
.1.3.6.1.4.1.11.2.14.11.15.2.61.1.2.1.3,HPN-ICF-SUBNET-VLAN-MIB::hpnicfSubnetVlanVlanIpAddressType,INTEGER,read-create,,current,unknown(0):ipv4(1):ipv6(2):ipv4z(3):ipv6z(4):dns(16),There are two kinds of ip address supported by VLAN. One is IPv4, which is 32 bits. The other is IPv6, which is 128 bits.
.1.3.6.1.4.1.11.2.14.11.15.2.61.1.2.1.4,HPN-ICF-SUBNET-VLAN-MIB::hpnicfSubnetVlanIpAddressValue,OCTET,read-create,,current,,The ip address of the configured subnet on VLAN, which can be an IPv4 or IPv6.
.1.3.6.1.4.1.11.2.14.11.15.2.61.1.2.1.5,HPN-ICF-SUBNET-VLAN-MIB::hpnicfSubnetVlanNetMaskValue,OCTET,read-create,,current,,The net mask of the configured subnet on VLAN, which can be an IPv4 or IPv6.
.1.3.6.1.4.1.11.2.14.11.15.2.61.1.2.1.6,HPN-ICF-SUBNET-VLAN-MIB::hpnicfSubnetVlanRowStatus,INTEGER,read-create,,current,active(1):notInService(2):notReady(3):createAndGo(4):createAndWait(5):destroy(6),The row status of this table.
.1.3.6.1.4.1.11.2.14.11.15.2.61.1.3,HPN-ICF-SUBNET-VLAN-MIB::hpnicfSubnetVlanPortCreateTable,,not-accessible,,current,,Subnet-based VLAN port table.
.1.3.6.1.4.1.11.2.14.11.15.2.61.1.3.1,HPN-ICF-SUBNET-VLAN-MIB::hpnicfSubnetVlanPortCreateEntry,,not-accessible,hpnicfSubnetVlanPortCreateIndex:hpnicfSubnetVlanPortCreateVlanId,current,,Subnet-based VLAN port creation entry.
.1.3.6.1.4.1.11.2.14.11.15.2.61.1.3.1.1,HPN-ICF-SUBNET-VLAN-MIB::hpnicfSubnetVlanPortCreateIndex,Integer32,not-accessible,,current,,The port index.
.1.3.6.1.4.1.11.2.14.11.15.2.61.1.3.1.2,HPN-ICF-SUBNET-VLAN-MIB::hpnicfSubnetVlanPortCreateVlanId,Integer32,not-accessible,,current,,The subnet-based VLAN id.
.1.3.6.1.4.1.11.2.14.11.15.2.61.1.3.1.3,HPN-ICF-SUBNET-VLAN-MIB::hpnicfSubnetVlanPortInfoVlanId,Integer32,read-only,,current,,This value is the same as the value of hpnicfSubnetVlanPortCreateVlanId index. All of the subnet information in this port, is described on vlan, whose VLAN id is the value of hpnicfSubnetVlanPortInfoVlanId. The VLAN id of vlan including subnet information can be obtained here. The subnet information can be obtained in the hpnicfSubnetVlanTable above.
.1.3.6.1.4.1.11.2.14.11.15.2.61.1.3.1.4,HPN-ICF-SUBNET-VLAN-MIB::hpnicfSubnetVlanPortRowStatus,INTEGER,read-create,,current,active(1):notInService(2):notReady(3):createAndGo(4):createAndWait(5):destroy(6),The row status of this table.
.1.3.6.1.4.1.11.2.14.11.15.2.61.1.3.1.5,HPN-ICF-SUBNET-VLAN-MIB::hpnicfSubnetVlanPortStatus,INTEGER,read-only,,current,active(1):inactive(2),The subnet VLAN status on the port. The value is active only when hpnicfSubnetVlanPortCreateVlanId has the corresponding entry in hpnicfSubnetVlanTable, the port link type is hybrid, and the VLAN is allowed by the port. active: subnet VLAN has been applied on the port. inactive: subnet VLAN is not applied on the port.
.1.3.6.1.4.1.11.2.14.11.15.2.61.2,HPN-ICF-SUBNET-VLAN-MIB::hpnicfSubnetVlanConformance,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.2.61.2.1,HPN-ICF-SUBNET-VLAN-MIB::hpnicfSubnetVlanCompliances,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.2.61.2.1.1,HPN-ICF-SUBNET-VLAN-MIB::hpnicfSubnetVlanCompliance,,,,,,The compliance statement for subnet VLAN MIB.
.1.3.6.1.4.1.11.2.14.11.15.2.61.2.2,HPN-ICF-SUBNET-VLAN-MIB::hpnicfSubnetVlanGroups,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.2.61.2.2.1,HPN-ICF-SUBNET-VLAN-MIB::hpnicfSubnetVlanScalarObjectGroup,,,,,,A group of scalar objects describing the maximum number.
.1.3.6.1.4.1.11.2.14.11.15.2.61.2.2.2,HPN-ICF-SUBNET-VLAN-MIB::hpnicfSubnetVlanSubnetGroup,,,,,,A group of subnet VLAN subnets.
.1.3.6.1.4.1.11.2.14.11.15.2.61.2.2.3,HPN-ICF-SUBNET-VLAN-MIB::hpnicfSubnetVlanPortCreateGroup,,,,,,A group of subnet VLAN port creation table.
.1.3.6.1.4.1.11.2.14.11.15.2.62,HPN-ICF-OID-MIB::hpnicfDlswExt,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.2.62.1,HPN-ICF-SNA-DLSW-EXT-MIB::hpnicfDlswExtMIBObjects,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.2.62.1.1,HPN-ICF-SNA-DLSW-EXT-MIB::hpnicfdeNode,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.2.62.1.1.1,HPN-ICF-SNA-DLSW-EXT-MIB::hpnicfdeNodeVendorID,OCTET,read-write,,current,,The value identifies the manufacturer's IEEE-assigned Organizationally Unique Identifier (OUI) of this DLSw. This information is reported in DLSw Capabilities Exchange.
.1.3.6.1.4.1.11.2.14.11.15.2.62.1.1.2,HPN-ICF-SNA-DLSW-EXT-MIB::hpnicfdeNodeIpAddrType,INTEGER,read-write,,current,unknown(0):ipv4(1):ipv6(2):ipv4z(3):ipv6z(4):dns(16),The type of ip address: IPv4 or IPv6.
.1.3.6.1.4.1.11.2.14.11.15.2.62.1.1.3,HPN-ICF-SNA-DLSW-EXT-MIB::hpnicfdeNodeLocalAddr,OCTET,read-write,,current,,Local peer ip address. This ip address must have been configured for a port on the router. If no local peer ip address is configured, then this object will be the empty string.
.1.3.6.1.4.1.11.2.14.11.15.2.62.1.1.4,HPN-ICF-SNA-DLSW-EXT-MIB::hpnicfdeNodePriority,Integer32,read-write,,current,,Peer priority advertised to remote peers in the DLSw Capabilities Exchange. If an end station can reach through more than one peer, the priority of each peer will be considered when a circuit is established. A lower priority indicates that peer will be the preferred choice if there are more than one path to the destination. A value of 65535 indicates the value is meaningless.
.1.3.6.1.4.1.11.2.14.11.15.2.62.1.1.5,HPN-ICF-SNA-DLSW-EXT-MIB::hpnicfdeNodeInitPacingWindow,Integer32,read-write,,current,,Initial pacing window size. This is the starting size of the pacing window. DLSw uses an adaptive pacing flow control algorithm that automatically adjusts to congestion levels in the network. Pacing windows are used to control how many packets may be sent to a peer before acknowlegement. A value of 65535 indicates the value is meaningless.
.1.3.6.1.4.1.11.2.14.11.15.2.62.1.1.6,HPN-ICF-SNA-DLSW-EXT-MIB::hpnicfdeNodeMaxPacingWindow,Integer32,read-write,,current,,Maximum pacing window size. This is the largest size that the pacing window will grow to. DLSw uses an adaptive pacing flow control algorithm that automatically adjusts to congestion levels in the network. Pacing windows are used to control how many packets may be sent to a peer before acknowlegement.
.1.3.6.1.4.1.11.2.14.11.15.2.62.1.1.7,HPN-ICF-SNA-DLSW-EXT-MIB::hpnicfdeNodeKeepAliveInterval,Integer32,read-write,,current,,Default remote peer keepalive interval in seconds. The keepalive parameter refers to how often DLSw peers send peer keep alives to each other. These periodic messages allow DLSw to keep track of the state of all peers. If set to zero, no keepalives are sent. A value of 65535 indicates the value is meaningless.
.1.3.6.1.4.1.11.2.14.11.15.2.62.1.1.8,HPN-ICF-SNA-DLSW-EXT-MIB::hpnicfdeNodePermitDynamic,INTEGER,read-write,,current,permitDynamic(1):forbidDynamic(2):unknown(65535),To accept connections from non-configured remote peer when permitDynamic is specified.
.1.3.6.1.4.1.11.2.14.11.15.2.62.1.1.9,HPN-ICF-SNA-DLSW-EXT-MIB::hpnicfdeNodeConnTimeout,Integer32,read-write,,current,,Define connected state timer.
.1.3.6.1.4.1.11.2.14.11.15.2.62.1.1.10,HPN-ICF-SNA-DLSW-EXT-MIB::hpnicfdeNodeLocalPendTimeout,Integer32,read-write,,current,,Define connected state timer.
.1.3.6.1.4.1.11.2.14.11.15.2.62.1.1.11,HPN-ICF-SNA-DLSW-EXT-MIB::hpnicfdeNodeRemotePendTimeout,Integer32,read-write,,current,,Define connected state timer.
.1.3.6.1.4.1.11.2.14.11.15.2.62.1.1.12,HPN-ICF-SNA-DLSW-EXT-MIB::hpnicfdeNodeSnaCacheTimeout,Integer32,read-write,,current,,Define connected state timer.
.1.3.6.1.4.1.11.2.14.11.15.2.62.1.1.13,HPN-ICF-SNA-DLSW-EXT-MIB::hpnicfdeNodeExplorerTimeout,Integer32,read-write,,current,,Define explorer timer.
.1.3.6.1.4.1.11.2.14.11.15.2.62.1.1.14,HPN-ICF-SNA-DLSW-EXT-MIB::hpnicfdeNodeExplorerWaitTimeout,Integer32,read-write,,current,,Define explorer waiting timer.
.1.3.6.1.4.1.11.2.14.11.15.2.62.1.1.15,HPN-ICF-SNA-DLSW-EXT-MIB::hpnicfdeNodeConfigSapList,OCTET,read-write,,current,,The SAP list indicates which SAPs are allowed. Only SAPs with even numbers are represented, in the form of the most significant bit of the first octet representing the SAP 0, the next most significant bit representing the SAP 2, to the least significant bit of the last octet representing the SAP 254. Data link switching is allowed for those SAPs which have one in its corresponding bit, not allowed otherwise. The whole SAP list has to be changed together. Changing the SAP list affects only new circuit establishments and has no effect on established circuits. This list can be used to restrict specific partners from knowing about all the SAPs used by DLSw on all its interfaces (these are represented in hpnicfdeIfSapList for each interface). For instance, one may want to run NetBIOS with some partners but not others. If a node supports sending run-time capabilities exchange messages, changes to this object should cause that action. When to start the run-time capabilities exchange is implementation-specific. The DEFVAL below indicates support for SAPs 0, 2, 4, 6, 8, A, C and E.
.1.3.6.1.4.1.11.2.14.11.15.2.62.1.1.16,HPN-ICF-SNA-DLSW-EXT-MIB::hpnicfdeNodeMaxTransmission,Integer32,read-write,,current,,The maximum retry times for TCP packet. Default value is 5.
.1.3.6.1.4.1.11.2.14.11.15.2.62.1.1.17,HPN-ICF-SNA-DLSW-EXT-MIB::hpnicfdeNodeMulticastStatus,INTEGER,read-write,,current,enabled(1):disabled(2),Multicast support status. It is disabled by default.
.1.3.6.1.4.1.11.2.14.11.15.2.62.1.1.18,HPN-ICF-SNA-DLSW-EXT-MIB::hpnicfdeNodeMulticastAddress,OCTET,read-write,,current,,Multicast address. Default is 224.0.10.0. When the hpnicfdeNodeMulticastStatus is disabled, the multicast address is reset to 0.0.0.0.
.1.3.6.1.4.1.11.2.14.11.15.2.62.1.1.19,HPN-ICF-SNA-DLSW-EXT-MIB::hpnicfdeNodeResetTcpAll,INTEGER,read-write,,current,reset(1),Reset all TCP circuit switch. Any return value is meaningless.
.1.3.6.1.4.1.11.2.14.11.15.2.62.1.1.20,HPN-ICF-SNA-DLSW-EXT-MIB::hpnicfdeNodeStCapTcpNum,Integer32,read-write,,current,,Tcp number reported in DLSw Capabilities Exchange.
.1.3.6.1.4.1.11.2.14.11.15.2.62.1.1.21,HPN-ICF-SNA-DLSW-EXT-MIB::hpnicfdeNodeTcpQueueMax,Integer32,read-write,,current,,The max length of TCP queue.
.1.3.6.1.4.1.11.2.14.11.15.2.62.1.2,HPN-ICF-SNA-DLSW-EXT-MIB::hpnicfdeTConn,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.2.62.1.2.1,HPN-ICF-SNA-DLSW-EXT-MIB::hpnicfdeTConnConfigTable,,not-accessible,,current,,This table defines the peer transport connections that will be initiated or accepted by this DLSw. This table augments dlswTConnConfigTable.
.1.3.6.1.4.1.11.2.14.11.15.2.62.1.2.1.1,HPN-ICF-SNA-DLSW-EXT-MIB::hpnicfdeTConnConfigEntry,,not-accessible,,current,,A list of objects that define specific configuration for a DLSw peer transport connection.
.1.3.6.1.4.1.11.2.14.11.15.2.62.1.2.1.1.1,HPN-ICF-SNA-DLSW-EXT-MIB::hpnicfdeTConnConfigVersion,OCTET,read-create,,current,,This value identifies which version (first octet) and release (second octet) of the DLSw standard is supported by this partner DLSw. This information is obtained from a DLSw Capabilities Exchange message received from the partner DLSw. A string of zero length is returned before a Capabilities Exchange message is received, or if one is never received. A conceptual row with a hpnicfdeTConnOperState of 'connected' but a zero length partner version indicates that the partner is a non-standard DLSw partner. If an implementation chooses to keep hpnicfdeTConnOperEntrys in the 'disconnected' state, this value should remain unchanged.
.1.3.6.1.4.1.11.2.14.11.15.2.62.1.2.1.1.2,HPN-ICF-SNA-DLSW-EXT-MIB::hpnicfdeTConnConfigPriority,Integer32,read-create,,current,,The priority for remote peer.
.1.3.6.1.4.1.11.2.14.11.15.2.62.1.2.1.1.3,HPN-ICF-SNA-DLSW-EXT-MIB::hpnicfdeTConnConfigLfSize,INTEGER,read-create,,current,lfs516(516):lfs635(635):lfs754(754):lfs873(873):lfs993(993):lfs1112(1112):lfs1231(1231):lfs1350(1350):lfs1470(1470):lfs1542(1542):lfs1615(1615):lfs1688(1688):lfs1761(1761):lfs1833(1833):lfs1906(1906):lfs1979(1979):lfs2052(2052):lfs2345(2345):lfs2638(2638):lfs2932(2932):lfs3225(3225):lfs3518(3518):lfs3812(3812):lfs4105(4105):lfs4399(4399):lfs4865(4865):lfs5331(5331):lfs5798(5798):lfs6264(6264):lfs6730(6730):lfs7197(7197):lfs7663(7663):lfs8130(8130):lfs8539(8539):lfs8949(8949):lfs9358(9358):lfs9768(9768):lfs10178(10178):lfs10587(10587):lfs10997(10997):lfs11407(11407):lfs12199(12199):lfs12992(12992):lfs13785(13785):lfs14578(14578):lfs15370(15370):lfs16163(16163):lfs16956(16956):lfs17749(17749):lfs20730(20730):lfs23711(23711):lfs26693(26693):lfs29674(29674):lfs32655(32655):lfs38618(38618):lfs41600(41600):lfs44591(44591):lfs47583(47583):lfs50575(50575):lfs53567(53567):lfs56559(56559):lfs59551(59551):lfs65535(65535),The largest frame size.
.1.3.6.1.4.1.11.2.14.11.15.2.62.1.2.1.1.4,HPN-ICF-SNA-DLSW-EXT-MIB::hpnicfdeTConnConfigKeepaliveIntval,Integer32,read-create,,current,,The keepalive interval value.
.1.3.6.1.4.1.11.2.14.11.15.2.62.1.2.1.1.5,HPN-ICF-SNA-DLSW-EXT-MIB::hpnicfdeTConnConfigBackup,INTEGER,read-create,,current,yes(1):no(2),The current remote peer is configured as the backup of another configured remote peer.
.1.3.6.1.4.1.11.2.14.11.15.2.62.1.2.1.1.6,HPN-ICF-SNA-DLSW-EXT-MIB::hpnicfdeTConnConfigBackupTAddr,OCTET,read-create,,current,,It is the ip address of a configured remote peer of which the current remote peer is configrued as backup.
.1.3.6.1.4.1.11.2.14.11.15.2.62.1.2.1.1.7,HPN-ICF-SNA-DLSW-EXT-MIB::hpnicfdeTConnConfigBackupLinger,Integer32,read-create,,current,,Backup peer linger.
.1.3.6.1.4.1.11.2.14.11.15.2.62.1.2.2,HPN-ICF-SNA-DLSW-EXT-MIB::hpnicfdeTConnOperTable,,not-accessible,,current,,A list of peer transport connections. Each connected peer will create a conceptual row in the table. When the peer disconnects, the row will be deleted from the table. This table augments dlswTConnOperTable.
.1.3.6.1.4.1.11.2.14.11.15.2.62.1.2.2.1,HPN-ICF-SNA-DLSW-EXT-MIB::hpnicfdeTConnOperEntry,,not-accessible,,current,,A list of objects that contain spefific operational information for a DLSw peer transport connection.
.1.3.6.1.4.1.11.2.14.11.15.2.62.1.2.2.1.1,HPN-ICF-SNA-DLSW-EXT-MIB::hpnicfdeTConnOperPeerType,INTEGER,read-only,,current,configured(1):learningDynamic(2):other(3),The current remote peer is configured when the value is 'configured'.
.1.3.6.1.4.1.11.2.14.11.15.2.62.1.2.2.1.2,HPN-ICF-SNA-DLSW-EXT-MIB::hpnicfdeTConnOperVendorID,OCTET,read-only,,current,,The value identifies the manufacturer's IEEE-assigned Organizationally Unique Identifier (OUI) of remote peer.
.1.3.6.1.4.1.11.2.14.11.15.2.62.1.2.2.1.3,HPN-ICF-SNA-DLSW-EXT-MIB::hpnicfdeTConnOperVersionString,OCTET,read-only,,current,,Version information of remote peer. The length up to 512 bytes.
.1.3.6.1.4.1.11.2.14.11.15.2.62.1.2.2.1.4,HPN-ICF-SNA-DLSW-EXT-MIB::hpnicfdeTConnOperUpTime,TimeTicks,read-only,,current,,The amount of time (in seconds) since this transport connection last entered the 'connected' state.
.1.3.6.1.4.1.11.2.14.11.15.2.62.1.2.2.1.5,HPN-ICF-SNA-DLSW-EXT-MIB::hpnicfdeTConnOperMulticastAddress,OCTET,read-only,,current,,When remote peer supports DLSw2.0, this node identifies its multicast address.
.1.3.6.1.4.1.11.2.14.11.15.2.62.1.2.2.1.6,HPN-ICF-SNA-DLSW-EXT-MIB::hpnicfdeTConnOperStCapTcpNumber,Integer32,read-only,,current,,Number of tcp supported when capabilities exchanging.
.1.3.6.1.4.1.11.2.14.11.15.2.62.1.2.2.1.7,HPN-ICF-SNA-DLSW-EXT-MIB::hpnicfdeTConnOperRecvPkts,Counter32,read-only,,current,,The number of Switch-to-Switch Protocol (SSP) messages received on this tcp transport connection.
.1.3.6.1.4.1.11.2.14.11.15.2.62.1.2.2.1.8,HPN-ICF-SNA-DLSW-EXT-MIB::hpnicfdeTConnOperSendPkts,Counter32,read-only,,current,,The number of SSP messages sent on this tcp transport connection.
.1.3.6.1.4.1.11.2.14.11.15.2.62.1.2.2.1.9,HPN-ICF-SNA-DLSW-EXT-MIB::hpnicfdeTConnOperDropPkts,Counter32,read-only,,current,,The number of SSP messages dropped on this tcp transport connection.
.1.3.6.1.4.1.11.2.14.11.15.2.62.1.2.3,HPN-ICF-SNA-DLSW-EXT-MIB::hpnicfdeTConnTcpConfigTable,,not-accessible,,current,,This table defines the TCP transport connections that will be either initiated by or accepted by this DSLw. It augments the entries in dlswTConnConfigTable whose domain is dlswTCPDomain. In other words for each conceptual row in the dlswTConnConfigTable, if the dlswTConnConfigTDomain is dlswTCPDomain, that conceptual row will be augmented by this table. dlswTCPDomain, dlswTConnConfigTable, and dlswTConnConfigTDomain are all imported from DLSW-MIB (RFC 2024). This table augments dlswTConnTcpConfigTable.
.1.3.6.1.4.1.11.2.14.11.15.2.62.1.2.3.1,HPN-ICF-SNA-DLSW-EXT-MIB::hpnicfdeTConnTcpConfigEntry,,not-accessible,,current,,A list of objects that define specific configuration for a DLSw peer transport connection within the dlswTCPDomain. dlswTCPDomain is imported from DLSW-MIB (RFC 2024).
.1.3.6.1.4.1.11.2.14.11.15.2.62.1.2.3.1.1,HPN-ICF-SNA-DLSW-EXT-MIB::hpnicfdeTConnTcpConfigQueueMax,Integer32,read-create,,current,,Maximum output TCP queue size for this remote peer. For DLSw over TCP encapsulation, packets may be queued due to congestion of the TCP network. This variable is used to set the output queue maximum of the underlying TCP connection for the peer represented by the conceptual row.
.1.3.6.1.4.1.11.2.14.11.15.2.62.1.3,HPN-ICF-SNA-DLSW-EXT-MIB::hpnicfdeBridge,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.2.62.1.3.1,HPN-ICF-SNA-DLSW-EXT-MIB::hpnicfdeBridgeTable,,not-accessible,,current,,A list of bridge group which is serving for DLSw.
.1.3.6.1.4.1.11.2.14.11.15.2.62.1.3.1.1,HPN-ICF-SNA-DLSW-EXT-MIB::hpnicfdeBridgeEntry,,not-accessible,hpnicfdeBridgeNumIndex,current,,A list of bridge information.
.1.3.6.1.4.1.11.2.14.11.15.2.62.1.3.1.1.1,HPN-ICF-SNA-DLSW-EXT-MIB::hpnicfdeBridgeNumIndex,Integer32,not-accessible,,current,,This value identifies the bridge number.
.1.3.6.1.4.1.11.2.14.11.15.2.62.1.3.1.1.2,HPN-ICF-SNA-DLSW-EXT-MIB::hpnicfdeBridgeRowStatus,INTEGER,read-create,,current,active(1):notInService(2):notReady(3):createAndGo(4):createAndWait(5):destroy(6),RowStatus.
.1.3.6.1.4.1.11.2.14.11.15.2.62.1.3.2,HPN-ICF-SNA-DLSW-EXT-MIB::hpnicfdeBridgeIfTable,,not-accessible,,current,,The list of interface on which DLSw is active.
.1.3.6.1.4.1.11.2.14.11.15.2.62.1.3.2.1,HPN-ICF-SNA-DLSW-EXT-MIB::hpnicfdeBridgeIfEntry,,not-accessible,ifIndex,current,,The list of bridge interface information.
.1.3.6.1.4.1.11.2.14.11.15.2.62.1.3.2.1.1,HPN-ICF-SNA-DLSW-EXT-MIB::hpnicfdeBridgeIfBrgGrp,Integer32,read-create,,current,,This value identifies the bridge number attached to the interface.
.1.3.6.1.4.1.11.2.14.11.15.2.62.1.3.2.1.2,HPN-ICF-SNA-DLSW-EXT-MIB::hpnicfdeBridgeIfRowStatus,INTEGER,read-create,,current,active(1):notInService(2):notReady(3):createAndGo(4):createAndWait(5):destroy(6),RowStatus.
.1.3.6.1.4.1.11.2.14.11.15.2.62.1.4,HPN-ICF-SNA-DLSW-EXT-MIB::hpnicfdeQllc,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.2.62.1.4.1,HPN-ICF-SNA-DLSW-EXT-MIB::hpnicfdeQllcTable,,not-accessible,,current,,The table defines attributes related for those QLLC that participate in data link switching.
.1.3.6.1.4.1.11.2.14.11.15.2.62.1.4.1.1,HPN-ICF-SNA-DLSW-EXT-MIB::hpnicfdeQllcEntry,,not-accessible,ifIndex,current,,The ifIndex belongs to the interface which link protocol is x.25.
.1.3.6.1.4.1.11.2.14.11.15.2.62.1.4.1.1.1,HPN-ICF-SNA-DLSW-EXT-MIB::hpnicfQllcX121Address,Integer32,read-create,,current,,X.121 address.
.1.3.6.1.4.1.11.2.14.11.15.2.62.1.4.1.1.2,HPN-ICF-SNA-DLSW-EXT-MIB::hpnicfQllcLocalMac,OCTET,read-create,,current,,The virtual MAC address used to represent the QLLC-attached link station to the rest of the DLSw network.
.1.3.6.1.4.1.11.2.14.11.15.2.62.1.4.1.1.3,HPN-ICF-SNA-DLSW-EXT-MIB::hpnicfQllcLocalSap,OCTET,read-create,,current,,The SAP used to represent this link station.
.1.3.6.1.4.1.11.2.14.11.15.2.62.1.4.1.1.4,HPN-ICF-SNA-DLSW-EXT-MIB::hpnicfQllcRemoteMac,OCTET,read-create,,current,,The MAC address to which DLSw should attempt to connect this link station. If this information is not available, a length of zero for this object should be returned.
.1.3.6.1.4.1.11.2.14.11.15.2.62.1.4.1.1.5,HPN-ICF-SNA-DLSW-EXT-MIB::hpnicfQllcRemoteSap,OCTET,read-create,,current,,The SAP of the remote station to which this link station should be connected. If this information is not available, a length of zero for this object should be returned.
.1.3.6.1.4.1.11.2.14.11.15.2.62.1.4.1.1.6,HPN-ICF-SNA-DLSW-EXT-MIB::hpnicfQllcRowStatus,INTEGER,read-create,,current,active(1):notInService(2):notReady(3):createAndGo(4):createAndWait(5):destroy(6),RowStatus.
.1.3.6.1.4.1.11.2.14.11.15.2.62.1.5,HPN-ICF-SNA-DLSW-EXT-MIB::hpnicfdeSdlc,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.2.62.1.5.1,HPN-ICF-SNA-DLSW-EXT-MIB::hpnicfdeSdlcPortTable,,not-accessible,,current,,The table defines parameters for the interfaces whose link protocol is SDLC.
.1.3.6.1.4.1.11.2.14.11.15.2.62.1.5.1.1,HPN-ICF-SNA-DLSW-EXT-MIB::hpnicfdeSdlcPortEntry,,not-accessible,ifIndex,current,,Sdlc port entry.
.1.3.6.1.4.1.11.2.14.11.15.2.62.1.5.1.1.1,HPN-ICF-SNA-DLSW-EXT-MIB::hpnicfdeSdlcPortRole,INTEGER,read-create,,current,primary(1):seconday(2):norole(3),The SDLC role of interface.
.1.3.6.1.4.1.11.2.14.11.15.2.62.1.5.1.1.2,HPN-ICF-SNA-DLSW-EXT-MIB::hpnicfdeSdlcPortSendWindow,Integer32,read-create,,current,,Size of local send window.
.1.3.6.1.4.1.11.2.14.11.15.2.62.1.5.1.1.3,HPN-ICF-SNA-DLSW-EXT-MIB::hpnicfdeSdlcPortModulo,INTEGER,read-create,,current,m8(8):m128(128),Size of modulus.
.1.3.6.1.4.1.11.2.14.11.15.2.62.1.5.1.1.4,HPN-ICF-SNA-DLSW-EXT-MIB::hpnicfdeSdlcPortMaxPdu,Integer32,read-create,,current,,Maximum bytes for incoming frames.
.1.3.6.1.4.1.11.2.14.11.15.2.62.1.5.1.1.5,HPN-ICF-SNA-DLSW-EXT-MIB::hpnicfdeSdlcPortMaxSendQueue,Integer32,read-create,,current,,Size of hold queue.
.1.3.6.1.4.1.11.2.14.11.15.2.62.1.5.1.1.6,HPN-ICF-SNA-DLSW-EXT-MIB::hpnicfdeSdlcPortMaxTransmission,Integer32,read-create,,current,,Number of times to retry an operation.
.1.3.6.1.4.1.11.2.14.11.15.2.62.1.5.1.1.7,HPN-ICF-SNA-DLSW-EXT-MIB::hpnicfdeSdlcPortSimultaneousEnable,INTEGER,read-create,,current,enabled(1):disabled(2),Activate SDLC two-way simultaneous mode.
.1.3.6.1.4.1.11.2.14.11.15.2.62.1.5.1.1.8,HPN-ICF-SNA-DLSW-EXT-MIB::hpnicfdeSdlcPortTimerACK,Integer32,read-create,,current,,Time to wait for a reply to a frame.
.1.3.6.1.4.1.11.2.14.11.15.2.62.1.5.1.1.9,HPN-ICF-SNA-DLSW-EXT-MIB::hpnicfdeSdlcPortTimerLifeTime,Integer32,read-create,,current,,Time to wait for a reply used by secondary station.
.1.3.6.1.4.1.11.2.14.11.15.2.62.1.5.1.1.10,HPN-ICF-SNA-DLSW-EXT-MIB::hpnicfdeSdlcPortTimerPollPause,Integer32,read-create,,current,,Time between polls for each secondary SDLC station.
.1.3.6.1.4.1.11.2.14.11.15.2.62.1.5.1.1.11,HPN-ICF-SNA-DLSW-EXT-MIB::hpnicfdeSdlcPortRowStatus,INTEGER,read-create,,current,active(1):notInService(2):notReady(3):createAndGo(4):createAndWait(5):destroy(6),RowStatus.
.1.3.6.1.4.1.11.2.14.11.15.2.62.1.6,HPN-ICF-SNA-DLSW-EXT-MIB::hpnicfdeLlc2,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.2.62.1.6.1,HPN-ICF-SNA-DLSW-EXT-MIB::hpnicfdeLlc2PortTable,,not-accessible,,current,,This table defines parameters for the Ethernet interface.
.1.3.6.1.4.1.11.2.14.11.15.2.62.1.6.1.1,HPN-ICF-SNA-DLSW-EXT-MIB::hpnicfdeLlc2PortEntry,,not-accessible,ifIndex,current,,LLC2 port entry.
.1.3.6.1.4.1.11.2.14.11.15.2.62.1.6.1.1.1,HPN-ICF-SNA-DLSW-EXT-MIB::hpnicfdeLlc2PortMaxAck,Integer32,read-create,,current,,Maximum of I-frames received before ACK.
.1.3.6.1.4.1.11.2.14.11.15.2.62.1.6.1.1.2,HPN-ICF-SNA-DLSW-EXT-MIB::hpnicfdeLlc2PortMaxPdu,Integer32,read-create,,current,,Maximum of LLC2 pdu length.
.1.3.6.1.4.1.11.2.14.11.15.2.62.1.6.1.1.3,HPN-ICF-SNA-DLSW-EXT-MIB::hpnicfdeLlc2PortMaxSendQueue,Integer32,read-create,,current,,Queue for sending llc2 I-frames.
.1.3.6.1.4.1.11.2.14.11.15.2.62.1.6.1.1.4,HPN-ICF-SNA-DLSW-EXT-MIB::hpnicfdeLlc2PortMaxTransmission,Integer32,read-create,,current,,Retry times of operations.
.1.3.6.1.4.1.11.2.14.11.15.2.62.1.6.1.1.5,HPN-ICF-SNA-DLSW-EXT-MIB::hpnicfdeLlc2PortModulo,INTEGER,read-create,,current,m8(8):m128(128),Modulus of LLC2.
.1.3.6.1.4.1.11.2.14.11.15.2.62.1.6.1.1.6,HPN-ICF-SNA-DLSW-EXT-MIB::hpnicfdeLlc2PortReceiveWindow,Integer32,read-create,,current,,Maximum number of I-frames to send before received ACK.
.1.3.6.1.4.1.11.2.14.11.15.2.62.1.6.1.1.7,HPN-ICF-SNA-DLSW-EXT-MIB::hpnicfdeLlc2PortTimerAck,Integer32,read-create,,current,,Waiting for ACK time after sending an I-frame.
.1.3.6.1.4.1.11.2.14.11.15.2.62.1.6.1.1.8,HPN-ICF-SNA-DLSW-EXT-MIB::hpnicfdeLlc2PortTimerAckDelay,Integer32,read-create,,current,,Maximum time allows I-frames incoming without replay ACK.
.1.3.6.1.4.1.11.2.14.11.15.2.62.1.6.1.1.9,HPN-ICF-SNA-DLSW-EXT-MIB::hpnicfdeLlc2PortTimerDetect,Integer32,read-create,,current,,Detect the link status.
.1.3.6.1.4.1.11.2.14.11.15.2.62.1.6.1.1.10,HPN-ICF-SNA-DLSW-EXT-MIB::hpnicfdeLlc2PortTimerBusy,Integer32,read-create,,current,,Waiting time while other LLC2 station is in busy state.
.1.3.6.1.4.1.11.2.14.11.15.2.62.1.6.1.1.11,HPN-ICF-SNA-DLSW-EXT-MIB::hpnicfdeLlc2PortTimerPoll,Integer32,read-create,,current,,Waiting time after a P frame is sent.
.1.3.6.1.4.1.11.2.14.11.15.2.62.1.6.1.1.12,HPN-ICF-SNA-DLSW-EXT-MIB::hpnicfdeLlc2PortTimerReject,Integer32,read-create,,current,,Waiting time after a REJ frame is sent.
.1.3.6.1.4.1.11.2.14.11.15.2.62.1.6.1.1.13,HPN-ICF-SNA-DLSW-EXT-MIB::hpnicfdeLlc2PortRowStatus,INTEGER,read-create,,current,active(1):notInService(2):notReady(3):createAndGo(4):createAndWait(5):destroy(6),RowStatus.
.1.3.6.1.4.1.11.2.14.11.15.2.62.1.7,HPN-ICF-SNA-DLSW-EXT-MIB::hpnicfdeReachableCache,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.2.62.1.7.1,HPN-ICF-SNA-DLSW-EXT-MIB::hpnicfdeRchCacheStat,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.2.62.1.7.1.1,HPN-ICF-SNA-DLSW-EXT-MIB::hpnicfdeRchCacheMaxIndex,Integer32,read-only,,current,,Maximum of hpnicfdeRchCacheIndex.
.1.3.6.1.4.1.11.2.14.11.15.2.62.1.7.1.2,HPN-ICF-SNA-DLSW-EXT-MIB::hpnicfdeRchCacheNextIndex,Integer32,read-only,,current,,The next value of hpnicfdeRchCacheIndex to be assigned by the agent. A retrieval of this object atomically reserves the returned value for use by the manager to create a row in hpnicfdeRchCacheTable. This makes it possible for the agent to control the index space of the MAC address cache, yet allows the manager to administratively create new rows.
.1.3.6.1.4.1.11.2.14.11.15.2.62.1.7.3,HPN-ICF-SNA-DLSW-EXT-MIB::hpnicfdeRchCacheTable,,not-accessible,,current,,Reachable cache table.
.1.3.6.1.4.1.11.2.14.11.15.2.62.1.7.3.1,HPN-ICF-SNA-DLSW-EXT-MIB::hpnicfdeRchCacheEntry,,not-accessible,hpnicfdeRchCacheIndex,current,,Reachable cache entry.
.1.3.6.1.4.1.11.2.14.11.15.2.62.1.7.3.1.1,HPN-ICF-SNA-DLSW-EXT-MIB::hpnicfdeRchCacheIndex,Integer32,not-accessible,,current,,Index of reachable cache entry.
.1.3.6.1.4.1.11.2.14.11.15.2.62.1.7.3.1.2,HPN-ICF-SNA-DLSW-EXT-MIB::hpnicfdeRchCacheStatus,INTEGER,read-only,,current,found(1):verify(2):noCacheInfo(3):exploring(4):waiting(5),Current status of reachable cache entry.
.1.3.6.1.4.1.11.2.14.11.15.2.62.1.7.3.1.3,HPN-ICF-SNA-DLSW-EXT-MIB::hpnicfdeRchCacheRemainTime,TimeTicks,read-only,,current,,Remain time of reachable cache entry.
.1.3.6.1.4.1.11.2.14.11.15.2.62.1.7.3.1.4,HPN-ICF-SNA-DLSW-EXT-MIB::hpnicfdeRchCacheMac,OCTET,read-create,,current,,MAC address of reachable cache entry.
.1.3.6.1.4.1.11.2.14.11.15.2.62.1.7.3.1.5,HPN-ICF-SNA-DLSW-EXT-MIB::hpnicfdeRchCacheRemoteIpAddrType,INTEGER,read-create,,current,unknown(0):ipv4(1):ipv6(2):ipv4z(3):ipv6z(4):dns(16),Remote peer ip address type.
.1.3.6.1.4.1.11.2.14.11.15.2.62.1.7.3.1.6,HPN-ICF-SNA-DLSW-EXT-MIB::hpnicfdeRchCacheRemoteIp,OCTET,read-create,,current,,Remote peer ip address of reachable cache entry.
.1.3.6.1.4.1.11.2.14.11.15.2.62.1.7.3.1.7,HPN-ICF-SNA-DLSW-EXT-MIB::hpnicfdeRchCacheRowStatus,INTEGER,read-create,,current,active(1):notInService(2):notReady(3):createAndGo(4):createAndWait(5):destroy(6),RowStatus.
.1.3.6.1.4.1.11.2.14.11.15.2.62.1.8,HPN-ICF-SNA-DLSW-EXT-MIB::hpnicfdeEthernetBackup,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.2.62.1.8.1,HPN-ICF-SNA-DLSW-EXT-MIB::hpnicfdeEBMacMapStat,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.2.62.1.8.1.1,HPN-ICF-SNA-DLSW-EXT-MIB::hpnicfdeEBMacMapMaxIndex,Integer32,read-only,,current,,Maximum of hpnicfdeEBMacMapIndex.
.1.3.6.1.4.1.11.2.14.11.15.2.62.1.8.1.2,HPN-ICF-SNA-DLSW-EXT-MIB::hpnicfdeEBMacMapNextIndex,Integer32,read-only,,current,,The next value of hpnicfdeEBMacMapIndex to be assigned by the agent. A retrieval of this object atomically reserves the returned value for use by the manager to create a row in hpnicfdeEBMacMapTable. This makes it possible for the agent to control the index space of the MAC mapping tables, yet allows the manager to administratively create new rows.
.1.3.6.1.4.1.11.2.14.11.15.2.62.1.8.3,HPN-ICF-SNA-DLSW-EXT-MIB::hpnicfdeEBIfTable,,not-accessible,,current,,Information of interface which works for DLSw Ethernet redundancy.
.1.3.6.1.4.1.11.2.14.11.15.2.62.1.8.3.1,HPN-ICF-SNA-DLSW-EXT-MIB::hpnicfdeEBIfEntry,,not-accessible,ifIndex,current,,Parameters defined for DLSw Ethernet redundancy interface.
.1.3.6.1.4.1.11.2.14.11.15.2.62.1.8.3.1.1,HPN-ICF-SNA-DLSW-EXT-MIB::hpnicfdeEBMulticastMac,OCTET,read-create,,current,,Multicast MAC address configured for the Ethernet redundancy of dlsw module. When Ethernet redundancy is inactive, its value is '000000000000'H. To active Ethernet redundancy, give it a valid multicast MAC address.
.1.3.6.1.4.1.11.2.14.11.15.2.62.1.8.3.1.2,HPN-ICF-SNA-DLSW-EXT-MIB::hpnicfdeEBPriority,Integer32,read-create,,current,,Priority configured for the Ethernet redundancy of DLSw module.
.1.3.6.1.4.1.11.2.14.11.15.2.62.1.8.3.1.3,HPN-ICF-SNA-DLSW-EXT-MIB::hpnicfdeEBtimer,Integer32,read-create,,current,,Timer for the Ethernet redundancy of DLSw module.
.1.3.6.1.4.1.11.2.14.11.15.2.62.1.8.3.1.4,HPN-ICF-SNA-DLSW-EXT-MIB::hpnicfdeEBRowStatus,INTEGER,read-create,,current,active(1):notInService(2):notReady(3):createAndGo(4):createAndWait(5):destroy(6),RowStatus.
.1.3.6.1.4.1.11.2.14.11.15.2.62.1.8.4,HPN-ICF-SNA-DLSW-EXT-MIB::hpnicfdeEBMacMapTable,,not-accessible,,current,,MAC address mapping table.
.1.3.6.1.4.1.11.2.14.11.15.2.62.1.8.4.1,HPN-ICF-SNA-DLSW-EXT-MIB::hpnicfdeEBMacMapEntry,,not-accessible,ifIndex:hpnicfdeEBMacMapIndex,current,,MAC address mapping entry.
.1.3.6.1.4.1.11.2.14.11.15.2.62.1.8.4.1.1,HPN-ICF-SNA-DLSW-EXT-MIB::hpnicfdeEBMacMapIndex,Integer32,not-accessible,,current,,Index of MAC address mapping entry.
.1.3.6.1.4.1.11.2.14.11.15.2.62.1.8.4.1.2,HPN-ICF-SNA-DLSW-EXT-MIB::hpnicfdeEBMacMapLocalMac,OCTET,read-create,,current,,Local MAC address in MAC address mapping. When creating a new conceptual row, hpnicfdeEBMacMapLocalMac and hpnicfdeEBMacMapRemoteMac should be set simultaneously.
.1.3.6.1.4.1.11.2.14.11.15.2.62.1.8.4.1.3,HPN-ICF-SNA-DLSW-EXT-MIB::hpnicfdeEBMacMapRemoteMac,OCTET,read-create,,current,,Remote MAC address of MAC address mapping. When creating a new conceptual row, hpnicfdeEBMacMapLocalMac and hpnicfdeEBMacMapRemoteMac should be set simultaneously.
.1.3.6.1.4.1.11.2.14.11.15.2.62.1.8.4.1.4,HPN-ICF-SNA-DLSW-EXT-MIB::hpnicfdeEBMacMapNeighbour,OCTET,read-create,,current,,Neighbour of MAC address mapping.
.1.3.6.1.4.1.11.2.14.11.15.2.62.1.8.4.1.5,HPN-ICF-SNA-DLSW-EXT-MIB::hpnicfdeEBMacMapRowStatus,INTEGER,read-create,,current,active(1):notInService(2):notReady(3):createAndGo(4):createAndWait(5):destroy(6),Status of MAC address mapping entry.
.1.3.6.1.4.1.11.2.14.11.15.2.63,HPN-ICF-OID-MIB::hpnicfSyslog,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.2.63.1,HPN-ICF-SYSLOG-MIB::hpnicfSyslogObjects,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.2.63.1.1,HPN-ICF-SYSLOG-MIB::hpnicfSyslogObject,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.2.63.1.1.1,HPN-ICF-SYSLOG-MIB::hpnicfSyslogState,INTEGER,read-write,,current,true(1):false(2),The state of syslog: true(1):enable. false(2):disable.
.1.3.6.1.4.1.11.2.14.11.15.2.63.1.1.2,HPN-ICF-SYSLOG-MIB::hpnicfSyslogMaxLoghost,Integer32,read-only,,current,,The object shows the maximum number of rows in hpnicfLoghostTable.
.1.3.6.1.4.1.11.2.14.11.15.2.63.1.1.3,HPN-ICF-SYSLOG-MIB::hpnicfSyslogMaxChannel,Integer32,read-only,,current,,The object shows the maximum number of channels in hpnicfSyslogChannelTable.
.1.3.6.1.4.1.11.2.14.11.15.2.63.1.1.4,HPN-ICF-SYSLOG-MIB::hpnicfSyslogMaxLogbufferSize,Integer32,read-only,,current,,The maximum number of messages that can be stored in logbuffer.
.1.3.6.1.4.1.11.2.14.11.15.2.63.1.1.5,HPN-ICF-SYSLOG-MIB::hpnicfSyslogMaxTrapbufferSize,Integer32,read-only,,current,,The maximum number of messages that can be stored in trapbuffer.
.1.3.6.1.4.1.11.2.14.11.15.2.63.1.1.6,HPN-ICF-SYSLOG-MIB::hpnicfSyslogState2,INTEGER,read-write,,current,off(0):on(1),Status of syslog, on for enabled or off for disabled. This node differs from hpnicfSyslogState in value.
.1.3.6.1.4.1.11.2.14.11.15.2.63.1.2,HPN-ICF-SYSLOG-MIB::hpnicfSyslogConsole,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.2.63.1.2.1,HPN-ICF-SYSLOG-MIB::hpnicfSyslogConsoleChannel,Integer32,read-write,,current,,The channel number of console.
.1.3.6.1.4.1.11.2.14.11.15.2.63.1.3,HPN-ICF-SYSLOG-MIB::hpnicfSyslogMonitor,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.2.63.1.3.1,HPN-ICF-SYSLOG-MIB::hpnicfSyslogMonitorChannel,Integer32,read-write,,current,,The channel number of monitor.
.1.3.6.1.4.1.11.2.14.11.15.2.63.1.4,HPN-ICF-SYSLOG-MIB::hpnicfSyslogSnmp,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.2.63.1.4.1,HPN-ICF-SYSLOG-MIB::hpnicfSyslogSnmpChannel,Integer32,read-write,,current,,The channel number of snmp.
.1.3.6.1.4.1.11.2.14.11.15.2.63.1.5,HPN-ICF-SYSLOG-MIB::hpnicfSyslogLogbuffer,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.2.63.1.5.1,HPN-ICF-SYSLOG-MIB::hpnicfSyslogLogbufferChannel,Integer32,read-write,,current,,The channel number of logbuffer.
.1.3.6.1.4.1.11.2.14.11.15.2.63.1.5.2,HPN-ICF-SYSLOG-MIB::hpnicfSyslogLogbufferSize,Integer32,read-write,,current,,The capacity of logbuffer which can be customized by users. The valid range is from 0 to hpnicfSyslogMaxLogbufferSize.
.1.3.6.1.4.1.11.2.14.11.15.2.63.1.5.3,HPN-ICF-SYSLOG-MIB::hpnicfSyslogLogbufferTable,,not-accessible,,current,,The table of logbuffer.
.1.3.6.1.4.1.11.2.14.11.15.2.63.1.5.3.1,HPN-ICF-SYSLOG-MIB::hpnicfSyslogLogbufferEntry,,not-accessible,hpnicfLogbufferIndex,current,,The logbuffer entry of syslog.
.1.3.6.1.4.1.11.2.14.11.15.2.63.1.5.3.1.1,HPN-ICF-SYSLOG-MIB::hpnicfLogbufferIndex,Integer32,not-accessible,,current,,The index of this table.
.1.3.6.1.4.1.11.2.14.11.15.2.63.1.5.3.1.2,HPN-ICF-SYSLOG-MIB::hpnicfLogbufferCurrentMessages,Unsigned32,read-only,,current,,The number of log messages stored in logbuffer.
.1.3.6.1.4.1.11.2.14.11.15.2.63.1.5.3.1.3,HPN-ICF-SYSLOG-MIB::hpnicfLogbufferOverwrittenMessages,Counter32,read-only,,current,,The number of log messages overwritten in logbuffer.
.1.3.6.1.4.1.11.2.14.11.15.2.63.1.5.3.1.4,HPN-ICF-SYSLOG-MIB::hpnicfLogbufferDroppedMessages,Counter32,read-only,,current,,The number of log messages dropped in logbuffer.
.1.3.6.1.4.1.11.2.14.11.15.2.63.1.5.4,HPN-ICF-SYSLOG-MIB::hpnicfSyslogLogbufContTable,,not-accessible,,current,,The table of logbuffer contents.
.1.3.6.1.4.1.11.2.14.11.15.2.63.1.5.4.1,HPN-ICF-SYSLOG-MIB::hpnicfSyslogLogbufContEntry,,not-accessible,hpnicfLogbufContIndex,current,,The contens entry of logbuffer.
.1.3.6.1.4.1.11.2.14.11.15.2.63.1.5.4.1.1,HPN-ICF-SYSLOG-MIB::hpnicfLogbufContIndex,Integer32,not-accessible,,current,,The index of this table.
.1.3.6.1.4.1.11.2.14.11.15.2.63.1.5.4.1.2,HPN-ICF-SYSLOG-MIB::hpnicfLogbufContDescription,OCTET,read-only,,current,,The contents of logbuffer.
.1.3.6.1.4.1.11.2.14.11.15.2.63.1.6,HPN-ICF-SYSLOG-MIB::hpnicfSyslogTrapbuffer,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.2.63.1.6.1,HPN-ICF-SYSLOG-MIB::hpnicfSyslogTrapbufferChannel,Integer32,read-write,,current,,The channel number of trapbuffer.
.1.3.6.1.4.1.11.2.14.11.15.2.63.1.6.2,HPN-ICF-SYSLOG-MIB::hpnicfSyslogTrapbufferSize,Integer32,read-write,,current,,The capacity of the trapbuffer which can be customized by users. The valid range is from 0 to hpnicfSyslogMaxTrapbufferSize.
.1.3.6.1.4.1.11.2.14.11.15.2.63.1.6.3,HPN-ICF-SYSLOG-MIB::hpnicfSyslogTrapbufferTable,,not-accessible,,current,,The table of trapbuffer.
.1.3.6.1.4.1.11.2.14.11.15.2.63.1.6.3.1,HPN-ICF-SYSLOG-MIB::hpnicfSyslogTrapbufferEntry,,not-accessible,hpnicfTrapbufferIndex,current,,The trapbuffer entry of syslog.
.1.3.6.1.4.1.11.2.14.11.15.2.63.1.6.3.1.1,HPN-ICF-SYSLOG-MIB::hpnicfTrapbufferIndex,Integer32,not-accessible,,current,,The index of this table.
.1.3.6.1.4.1.11.2.14.11.15.2.63.1.6.3.1.2,HPN-ICF-SYSLOG-MIB::hpnicfTrapbufferCurrentMessages,Unsigned32,read-only,,current,,The number of trap messages stored in trapbuffer.
.1.3.6.1.4.1.11.2.14.11.15.2.63.1.6.3.1.3,HPN-ICF-SYSLOG-MIB::hpnicfTrapbufferOverwrittenMessages,Counter32,read-only,,current,,The number of trap messages overwritten in trapbuffer.
.1.3.6.1.4.1.11.2.14.11.15.2.63.1.6.3.1.4,HPN-ICF-SYSLOG-MIB::hpnicfTrapbufferDroppedMessages,Counter32,read-only,,current,,The number of trap messages dropped in trapbuffer.
.1.3.6.1.4.1.11.2.14.11.15.2.63.1.7,HPN-ICF-SYSLOG-MIB::hpnicfSyslogLoghost,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.2.63.1.7.1,HPN-ICF-SYSLOG-MIB::hpnicfSyslogLoghostSourceInterface,Integer32,read-write,,current,,The source interface which sends message to loghost. All loghosts use the same source interface.
.1.3.6.1.4.1.11.2.14.11.15.2.63.1.7.2,HPN-ICF-SYSLOG-MIB::hpnicfSyslogLoghostTimestampType,INTEGER,read-write,,current,none(1):date(2):boot(3):dateWithoutYear(4),Time stamp type of message sent to loghost.
.1.3.6.1.4.1.11.2.14.11.15.2.63.1.7.3,HPN-ICF-SYSLOG-MIB::hpnicfSyslogLoghostTable,,not-accessible,,current,,The table of loghost.
.1.3.6.1.4.1.11.2.14.11.15.2.63.1.7.3.1,HPN-ICF-SYSLOG-MIB::hpnicfSyslogLoghostEntry,,not-accessible,hpnicfSyslogLoghostIndex,current,,The loghost entry of syslog.
.1.3.6.1.4.1.11.2.14.11.15.2.63.1.7.3.1.1,HPN-ICF-SYSLOG-MIB::hpnicfSyslogLoghostIndex,Integer32,not-accessible,,current,,The index of this table.
.1.3.6.1.4.1.11.2.14.11.15.2.63.1.7.3.1.2,HPN-ICF-SYSLOG-MIB::hpnicfSyslogLoghostChannel,Integer32,read-create,,current,,The channel number of loghost.
.1.3.6.1.4.1.11.2.14.11.15.2.63.1.7.3.1.3,HPN-ICF-SYSLOG-MIB::hpnicfSyslogLoghostIpaddressType,INTEGER,read-create,,current,unknown(0):ipv4(1):ipv6(2):ipv4z(3):ipv6z(4):dns(16),The ip address type of loghost.
.1.3.6.1.4.1.11.2.14.11.15.2.63.1.7.3.1.4,HPN-ICF-SYSLOG-MIB::hpnicfSyslogLoghostIpaddress,OCTET,read-create,,current,,The ip address of loghost.
.1.3.6.1.4.1.11.2.14.11.15.2.63.1.7.3.1.5,HPN-ICF-SYSLOG-MIB::hpnicfSyslogLoghostFacility,INTEGER,read-create,,current,kernel(0):userLevel(1):mailSystem(2):systemDaemons(3):securityAuthorization(4):internallyMessages(5):linePrinter(6):networkNews(7):uucp(8):clockDaemon(9):securityAuthorization2(10):ftpDaemon(11):ntp(12):logAudit(13):logAlert(14):clockDaemon2(15):local0(16):local1(17):local2(18):local3(19):local4(20):local5(21):local6(22):local7(23),The operations staff can selectively filter the messages with priority which consists of facility that generates the message and severity of the message. 
.1.3.6.1.4.1.11.2.14.11.15.2.63.1.7.3.1.6,HPN-ICF-SYSLOG-MIB::hpnicfSyslogLoghostLanguage,INTEGER,read-create,,current,chinese(1):english(2),The language of the message sent to the loghost.
.1.3.6.1.4.1.11.2.14.11.15.2.63.1.7.3.1.7,HPN-ICF-SYSLOG-MIB::hpnicfSyslogLoghostOperateRowStatus,INTEGER,read-create,,current,active(1):notInService(2):notReady(3):createAndGo(4):createAndWait(5):destroy(6),The status of this table entry.
.1.3.6.1.4.1.11.2.14.11.15.2.63.1.7.3.1.8,HPN-ICF-SYSLOG-MIB::hpnicfSyslogLoghostIpaddressPort,Integer32,read-create,,current,,The loghost server port.
.1.3.6.1.4.1.11.2.14.11.15.2.63.1.7.3.1.9,HPN-ICF-SYSLOG-MIB::hpnicfSyslogLoghostTAddress,OCTET,read-create,,current,,The loghost server transport address.
.1.3.6.1.4.1.11.2.14.11.15.2.63.1.8,HPN-ICF-SYSLOG-MIB::hpnicfSyslogChannel,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.2.63.1.8.1,HPN-ICF-SYSLOG-MIB::hpnicfSyslogChannelTable,,not-accessible,,current,,A table of syslog channel.
.1.3.6.1.4.1.11.2.14.11.15.2.63.1.8.1.1,HPN-ICF-SYSLOG-MIB::hpnicfSyslogChannelEntry,,not-accessible,hpnicfSyslogChannelIndex,current,,The channel entry of syslog.
.1.3.6.1.4.1.11.2.14.11.15.2.63.1.8.1.1.1,HPN-ICF-SYSLOG-MIB::hpnicfSyslogChannelIndex,Integer32,not-accessible,,current,,The index of this table.
.1.3.6.1.4.1.11.2.14.11.15.2.63.1.8.1.1.2,HPN-ICF-SYSLOG-MIB::hpnicfSyslogChannelName,OCTET,read-write,,current,,The name of channel. The channel name must be different from each other.
.1.3.6.1.4.1.11.2.14.11.15.2.63.1.9,HPN-ICF-SYSLOG-MIB::hpnicfSyslogModule,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.2.63.1.9.1,HPN-ICF-SYSLOG-MIB::hpnicfSyslogModuleTable,,not-accessible,,current,,A table of syslog module.
.1.3.6.1.4.1.11.2.14.11.15.2.63.1.9.1.1,HPN-ICF-SYSLOG-MIB::hpnicfSyslogModuleEntry,,not-accessible,hpnicfSyslogModuleIndex,current,,The module entry of syslog.
.1.3.6.1.4.1.11.2.14.11.15.2.63.1.9.1.1.1,HPN-ICF-SYSLOG-MIB::hpnicfSyslogModuleIndex,Integer32,not-accessible,,current,,The index of this table.
.1.3.6.1.4.1.11.2.14.11.15.2.63.1.9.1.1.2,HPN-ICF-SYSLOG-MIB::hpnicfSyslogModuleName,OCTET,read-only,,current,,The name of module.
.1.3.6.1.4.1.11.2.14.11.15.2.63.1.10,HPN-ICF-SYSLOG-MIB::hpnicfSyslogLog,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.2.63.1.10.1,HPN-ICF-SYSLOG-MIB::hpnicfSyslogLogTimestampType,INTEGER,read-write,,current,none(1):date(2):boot(3):dateWithoutYear(4),Time stamp type of log message.
.1.3.6.1.4.1.11.2.14.11.15.2.63.1.10.2,HPN-ICF-SYSLOG-MIB::hpnicfSyslogLogTable,,not-accessible,,current,,A table of syslog module.
.1.3.6.1.4.1.11.2.14.11.15.2.63.1.10.2.1,HPN-ICF-SYSLOG-MIB::hpnicfSyslogLogEntry,,not-accessible,hpnicfSyslogChannelIndex:hpnicfSyslogModuleIndex,current,,The log entry of syslog.
.1.3.6.1.4.1.11.2.14.11.15.2.63.1.10.2.1.1,HPN-ICF-SYSLOG-MIB::hpnicfSyslogLogState,INTEGER,read-create,,current,true(1):false(2),The switch state of log.
.1.3.6.1.4.1.11.2.14.11.15.2.63.1.10.2.1.2,HPN-ICF-SYSLOG-MIB::hpnicfSyslogLogLevel,INTEGER,read-create,,current,emergency(1):alert(2):critical(3):error(4):warning(5):notice(6):informational(7):debug(8):invalid(9),The level of log message.
.1.3.6.1.4.1.11.2.14.11.15.2.63.1.10.2.1.3,HPN-ICF-SYSLOG-MIB::hpnicfSyslogLogRowStatus,INTEGER,read-create,,current,active(1):notInService(2):notReady(3):createAndGo(4):createAndWait(5):destroy(6),The status of this table entry.
.1.3.6.1.4.1.11.2.14.11.15.2.63.1.10.3,HPN-ICF-SYSLOG-MIB::hpnicfSyslogLogGlobalLevel,INTEGER,read-write,,obsolete,emergency(1):alert(2):critical(3):error(4):warning(5):notice(6):informational(7):debug(8):invalid(9),The global level of log message. This object is replaced by hpnicfSyslogLogGlobalLevelRfc because its value does not accord with RFC5424.
.1.3.6.1.4.1.11.2.14.11.15.2.63.1.10.4,HPN-ICF-SYSLOG-MIB::hpnicfSyslogLogGlobalLevelRfc,INTEGER,read-write,,current,emergency(0):alert(1):critical(2):error(3):warning(4):notice(5):informational(6):debug(7),The global level of log message. This object replaces hpnicfSyslogLogGlobalLevel because it observes the terms of RFC5424.
.1.3.6.1.4.1.11.2.14.11.15.2.63.1.11,HPN-ICF-SYSLOG-MIB::hpnicfSyslogTrap,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.2.63.1.11.1,HPN-ICF-SYSLOG-MIB::hpnicfSyslogTrapTimestampType,INTEGER,read-write,,current,none(1):date(2):boot(3):dateWithoutYear(4),Time stamp type of trap message.
.1.3.6.1.4.1.11.2.14.11.15.2.63.1.11.2,HPN-ICF-SYSLOG-MIB::hpnicfSyslogTrapTable,,not-accessible,,current,,A table of syslog module.
.1.3.6.1.4.1.11.2.14.11.15.2.63.1.11.2.1,HPN-ICF-SYSLOG-MIB::hpnicfSyslogTrapEntry,,not-accessible,hpnicfSyslogChannelIndex:hpnicfSyslogModuleIndex,current,,The trap entry of syslog.
.1.3.6.1.4.1.11.2.14.11.15.2.63.1.11.2.1.1,HPN-ICF-SYSLOG-MIB::hpnicfSyslogTrapState,INTEGER,read-create,,current,true(1):false(2),The switch state of trap.
.1.3.6.1.4.1.11.2.14.11.15.2.63.1.11.2.1.2,HPN-ICF-SYSLOG-MIB::hpnicfSyslogTrapLevel,INTEGER,read-create,,current,emergency(1):alert(2):critical(3):error(4):warning(5):notice(6):informational(7):debug(8):invalid(9),The level of trap message.
.1.3.6.1.4.1.11.2.14.11.15.2.63.1.11.2.1.3,HPN-ICF-SYSLOG-MIB::hpnicfSyslogTrapRowStatus,INTEGER,read-create,,current,active(1):notInService(2):notReady(3):createAndGo(4):createAndWait(5):destroy(6),The status of this table entry.
.1.3.6.1.4.1.11.2.14.11.15.2.63.1.12,HPN-ICF-SYSLOG-MIB::hpnicfSyslogDebug,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.2.63.1.12.1,HPN-ICF-SYSLOG-MIB::hpnicfSyslogDebugTimestampType,INTEGER,read-write,,current,none(1):date(2):boot(3):dateWithoutYear(4),Time stamp type of debug message.
.1.3.6.1.4.1.11.2.14.11.15.2.63.1.12.2,HPN-ICF-SYSLOG-MIB::hpnicfSyslogDebugTable,,not-accessible,,current,,A table of syslog module.
.1.3.6.1.4.1.11.2.14.11.15.2.63.1.12.2.1,HPN-ICF-SYSLOG-MIB::hpnicfSyslogDebugEntry,,not-accessible,hpnicfSyslogChannelIndex:hpnicfSyslogModuleIndex,current,,The debug entry of syslog.
.1.3.6.1.4.1.11.2.14.11.15.2.63.1.12.2.1.1,HPN-ICF-SYSLOG-MIB::hpnicfSyslogDebugState,INTEGER,read-create,,current,true(1):false(2),The switch state of debug.
.1.3.6.1.4.1.11.2.14.11.15.2.63.1.12.2.1.2,HPN-ICF-SYSLOG-MIB::hpnicfSyslogDebugLevel,INTEGER,read-create,,current,emergency(1):alert(2):critical(3):error(4):warning(5):notice(6):informational(7):debug(8):invalid(9),The level of debug message.
.1.3.6.1.4.1.11.2.14.11.15.2.63.1.12.2.1.3,HPN-ICF-SYSLOG-MIB::hpnicfSyslogDebugRowStatus,INTEGER,read-create,,current,active(1):notInService(2):notReady(3):createAndGo(4):createAndWait(5):destroy(6),The status of this table entry.
.1.3.6.1.4.1.11.2.14.11.15.2.64,HPN-ICF-OID-MIB::hpnicfFlowTemplate,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.2.64.1,HPN-ICF-FLOWTEMPLATE-MIB::hpnicfFlowTemplateMibObject,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.2.64.1.1,HPN-ICF-FLOWTEMPLATE-MIB::hpnicfFTConfigGroup,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.2.64.1.1.1,HPN-ICF-FLOWTEMPLATE-MIB::hpnicfFTGroupNextIndex,Integer32,read-only,,current,,This object contains an appropriate value to be used for hpnicfFTGroupIndex  when creating rows in the hpnicfFTGroupTable. If it is 2147483647,  it denotes that hpnicfFTGroupTable can't create any instance.  
.1.3.6.1.4.1.11.2.14.11.15.2.64.1.1.2,HPN-ICF-FLOWTEMPLATE-MIB::hpnicfFTGroupTable,,not-accessible,,current,,A table of flow template group. A flow template group, which is applied to interface, must use hpnicfFTGroupTable to create a instance  and hpnicfFTBasicGroupTable or hpnicfFTExtendGroupTable  to configure flow template's need item. A basic flow template must use hpnicfFTBasicGroupTable  to configure some basic flow template's need item,  such as: address, protocol, priority. A extend flow template must use hpnicfFTExtendGroupTable to configure packet's type and offset and length. 
.1.3.6.1.4.1.11.2.14.11.15.2.64.1.1.2.1,HPN-ICF-FLOWTEMPLATE-MIB::hpnicfFTGroupEntry,,not-accessible,hpnicfFTGroupIndex,current,,Flow template group information.
.1.3.6.1.4.1.11.2.14.11.15.2.64.1.1.2.1.1,HPN-ICF-FLOWTEMPLATE-MIB::hpnicfFTGroupIndex,Integer32,not-accessible,,current,,Flow template group index.
.1.3.6.1.4.1.11.2.14.11.15.2.64.1.1.2.1.2,HPN-ICF-FLOWTEMPLATE-MIB::hpnicfFTGroupName,OCTET,read-create,,current,,Flow template group name.
.1.3.6.1.4.1.11.2.14.11.15.2.64.1.1.2.1.3,HPN-ICF-FLOWTEMPLATE-MIB::hpnicfFTGroupType,INTEGER,read-create,,current,basic(1):extend(2),Type of flow template.
.1.3.6.1.4.1.11.2.14.11.15.2.64.1.1.2.1.4,HPN-ICF-FLOWTEMPLATE-MIB::hpnicfFTGroupRowStatus,INTEGER,read-create,,current,active(1):notInService(2):notReady(3):createAndGo(4):createAndWait(5):destroy(6),RowStatus.
.1.3.6.1.4.1.11.2.14.11.15.2.64.1.1.3,HPN-ICF-FLOWTEMPLATE-MIB::hpnicfFTBasicGroupTable,,not-accessible,,current,,A table of basic flow template group.
.1.3.6.1.4.1.11.2.14.11.15.2.64.1.1.3.1,HPN-ICF-FLOWTEMPLATE-MIB::hpnicfFTBasicGroupEntry,,not-accessible,hpnicfFTGroupIndex,current,,Basic flow template group information.
.1.3.6.1.4.1.11.2.14.11.15.2.64.1.1.3.1.1,HPN-ICF-FLOWTEMPLATE-MIB::hpnicfFTBasicGroupAddressType,BITS,read-create,,current,sourceIpv4Address(0):destIPv4Address(1):sourceIPv6Address(2):destIPv6Address(3):sourceMacAddress(4):destMacAddress(5),Type of MAC and IP address. This is a bit-map of possible conditions. The various bit positions are: sourceIpv4Address source IPv4's address  destIPv4Address destination IPv4's address sourceIPv6Address source IPv6 address destIPv6Address destination IPv6 address sourceMacAddress source MAC address destMacAddress destination MAC address 
.1.3.6.1.4.1.11.2.14.11.15.2.64.1.1.3.1.2,HPN-ICF-FLOWTEMPLATE-MIB::hpnicfFTBasicGroupPriorityType,BITS,read-create,,current,vlanID(0):cos(1):topVlanID(2):topCos(3):fragment(4):tcpFlag(5):tos(6):dscp(7):ipprecedence(8),Type of priority. This is a bit-map of possible conditions. The various bit positions are: vlanID VlanID cos 802.1p priority topVlanID VlanID of top layer topCos 802.1p priority of top layer fragment fragment tcpFlag TCP flag tos type of service dscp DSCP ipprecedence IP precedence 
.1.3.6.1.4.1.11.2.14.11.15.2.64.1.1.3.1.3,HPN-ICF-FLOWTEMPLATE-MIB::hpnicfFTBasicGroupProtocolType,BITS,read-create,,current,l2Potocol(0):ipv4L3Protocol(1):ipv6L3Protocol(2):icmpProtocolType(3):icmpProtocolCode(4):icmpv6ProtocolType(5):icmpv6ProtocolCode(6):sourceL4Port(7):destL4Port(8),Type of protocol. This is a bit-map of possible conditions. The various bit positions are: l2Potocol layer 2 protocol ipv4L3Protocol layer 3 protocol of IPv4  ipv6L3Protocol layer 3 protocol of IPv6 icmpProtocolType Type of ICMP protocol of IPv4 icmpProtocolCode Code of ICMP protocol of IPv4 icmpv6ProtocolType Type of ICMP protocol of IPv6 icmpv6ProtocolCode Code of ICMP protocol of IPv6 sourceL4Port port of layer 4 of source destL4Port port of layer 4 of destination 
.1.3.6.1.4.1.11.2.14.11.15.2.64.1.1.3.1.4,HPN-ICF-FLOWTEMPLATE-MIB::hpnicfFTBasicGroupSMacWildCard,OCTET,read-create,,current,,Source MAC address field in Ethernet packet head.
.1.3.6.1.4.1.11.2.14.11.15.2.64.1.1.3.1.5,HPN-ICF-FLOWTEMPLATE-MIB::hpnicfFTBasicGroupDMacWildCard,OCTET,read-create,,current,,Destination MAC address field in Ethernet packet head.
.1.3.6.1.4.1.11.2.14.11.15.2.64.1.1.3.1.6,HPN-ICF-FLOWTEMPLATE-MIB::hpnicfFTBasicGroupRowStatus,INTEGER,read-create,,current,active(1):notInService(2):notReady(3):createAndGo(4):createAndWait(5):destroy(6),RowStatus.
.1.3.6.1.4.1.11.2.14.11.15.2.64.1.1.4,HPN-ICF-FLOWTEMPLATE-MIB::hpnicfFTExtendGroupTable,,not-accessible,,current,,A table of extend flow template group information.
.1.3.6.1.4.1.11.2.14.11.15.2.64.1.1.4.1,HPN-ICF-FLOWTEMPLATE-MIB::hpnicfFTExtendGroupEntry,,not-accessible,hpnicfFTGroupIndex:hpnicfFTExtendGroupOffsetType,current,,Extend flow template group information entry.
.1.3.6.1.4.1.11.2.14.11.15.2.64.1.1.4.1.1,HPN-ICF-FLOWTEMPLATE-MIB::hpnicfFTExtendGroupOffsetType,INTEGER,not-accessible,,current,start(1):mpls(2):l2(3):l4(4):l5(5):ipv4(6):ipv6(7),Offset type of the packet. start Offset from the start of the packet mpls Offset from the head of MPLS l2 Offset from the head of the L2 frame l4 Offset from the head of L4 packet l5 Offset from the head of the L5 packet ipv4 Offset from the head of the IPv4 packet ipv6 Offset from the head of the IPv6 packet 
.1.3.6.1.4.1.11.2.14.11.15.2.64.1.1.4.1.2,HPN-ICF-FLOWTEMPLATE-MIB::hpnicfFTExtendGroupOffsetMaxValue,Integer32,read-create,,current,,The max value of offset.
.1.3.6.1.4.1.11.2.14.11.15.2.64.1.1.4.1.3,HPN-ICF-FLOWTEMPLATE-MIB::hpnicfFTExtendGroupLengthMaxValue,Integer32,read-create,,current,,The max value of length.
.1.3.6.1.4.1.11.2.14.11.15.2.64.1.1.4.1.4,HPN-ICF-FLOWTEMPLATE-MIB::hpnicfFTExtendGroupRowStatus,INTEGER,read-create,,current,active(1):notInService(2):notReady(3):createAndGo(4):createAndWait(5):destroy(6),RowStatus.
.1.3.6.1.4.1.11.2.14.11.15.2.64.1.2,HPN-ICF-FLOWTEMPLATE-MIB::hpnicfFTApplyGroup,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.2.64.1.2.1,HPN-ICF-FLOWTEMPLATE-MIB::hpnicfFTIfApplyTable,,not-accessible,,current,,A table of any interface with flowtemplate. A flow template, which will be applied interface, is an instance at hpnicfFTGroupTable  and hpnicfFTBasicGroupTable or hpnicfFTExtendGroupTable. A basic flow template is an instance at hpnicfFTGroupTable  and hpnicfFTBasicGroupTable, and the instance's RowStatus  must be 'active' at each table. A extend flow template is an instance at hpnicfFTGroupTable and hpnicfFTExtendGroupTable, and the instance's RowStatus  must be 'active' at each table.  
.1.3.6.1.4.1.11.2.14.11.15.2.64.1.2.1.1,HPN-ICF-FLOWTEMPLATE-MIB::hpnicfFTIfApplyEntry,,not-accessible,ifIndex:hpnicfFTGroupIndex,current,,Any interface with flowtemplate information.
.1.3.6.1.4.1.11.2.14.11.15.2.64.1.2.1.1.1,HPN-ICF-FLOWTEMPLATE-MIB::hpnicfFTIfApplyGroupName,OCTET,read-only,,current,,The name of flow template.
.1.3.6.1.4.1.11.2.14.11.15.2.64.1.2.1.1.2,HPN-ICF-FLOWTEMPLATE-MIB::hpnicfFTIfApplyRowStatus,INTEGER,read-create,,current,active(1):notInService(2):notReady(3):createAndGo(4):createAndWait(5):destroy(6),RowStatus.
.1.3.6.1.4.1.11.2.14.11.15.2.65,HPN-ICF-OID-MIB::hpnicfQos2,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.2.65.1,HPN-ICF-OID-MIB::hpnicfIfQos2,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.2.65.1.1,HPN-ICF-IFQOS2-MIB::hpnicfIfQoSHardwareQueueObjects,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.2.65.1.1.1,HPN-ICF-IFQOS2-MIB::hpnicfIfQoSHardwareQueueConfigGroup,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.2.65.1.1.1.1,HPN-ICF-IFQOS2-MIB::hpnicfIfQoSQSModeTable,,not-accessible,,current,,A table of queue schedule mode information.
.1.3.6.1.4.1.11.2.14.11.15.2.65.1.1.1.1.1,HPN-ICF-IFQOS2-MIB::hpnicfIfQoSQSModeEntry,,not-accessible,ifIndex,current,,Queue schedule mode information entry.
.1.3.6.1.4.1.11.2.14.11.15.2.65.1.1.1.1.1.1,HPN-ICF-IFQOS2-MIB::hpnicfIfQoSQSMode,INTEGER,read-write,,current,sp(1):sp0(2):sp1(3):sp2(4):wrr(5):hpnicffq(6):wrr-sp(7):byteCountWrr(8):byteCountWfq(9):gmb(10),The mode of schedule.
.1.3.6.1.4.1.11.2.14.11.15.2.65.1.1.1.2,HPN-ICF-IFQOS2-MIB::hpnicfIfQoSQSWeightTable,,not-accessible,,current,,A table of queue schedule weight configuration information.
.1.3.6.1.4.1.11.2.14.11.15.2.65.1.1.1.2.1,HPN-ICF-IFQOS2-MIB::hpnicfIfQoSQSWeightEntry,,not-accessible,ifIndex:hpnicfIfQoSQueueID,current,,Queue schedule weight configuration information entry.
.1.3.6.1.4.1.11.2.14.11.15.2.65.1.1.1.2.1.1,HPN-ICF-IFQOS2-MIB::hpnicfIfQoSQueueID,Integer32,not-accessible,,current,,Queue ID
.1.3.6.1.4.1.11.2.14.11.15.2.65.1.1.1.2.1.2,HPN-ICF-IFQOS2-MIB::hpnicfIfQoSQueueGroupType,INTEGER,read-write,,current,group0(1):group1(2):group2(3),Group type of WRR and WFQ.
.1.3.6.1.4.1.11.2.14.11.15.2.65.1.1.1.2.1.3,HPN-ICF-IFQOS2-MIB::hpnicfIfQoSQSType,INTEGER,read-write,,current,weight(1):byte-count(2),Schedule type.
.1.3.6.1.4.1.11.2.14.11.15.2.65.1.1.1.2.1.4,HPN-ICF-IFQOS2-MIB::hpnicfIfQoSQSValue,Integer32,read-write,,current,,Schedule value.
.1.3.6.1.4.1.11.2.14.11.15.2.65.1.1.1.2.1.5,HPN-ICF-IFQOS2-MIB::hpnicfIfQoSQSMaxDelay,Integer32,read-write,,current,,Max delay.
.1.3.6.1.4.1.11.2.14.11.15.2.65.1.1.1.2.1.6,HPN-ICF-IFQOS2-MIB::hpnicfIfQoSQSMinBandwidth,Integer32,read-write,,current,,Min bandwidth. Unit: kbps.
.1.3.6.1.4.1.11.2.14.11.15.2.65.1.1.1.2.1.7,HPN-ICF-IFQOS2-MIB::hpnicfIfQoSQSMinBandwidthPercent,Unsigned32,read-write,,current,,Percent of min bandwidth. Unit: %. The value is 255 when the schedule mode of the queue is strict queuing. 
.1.3.6.1.4.1.11.2.14.11.15.2.65.1.1.2,HPN-ICF-IFQOS2-MIB::hpnicfIfQoSHardwareQueueRunInfoGroup,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.2.65.1.1.2.1,HPN-ICF-IFQOS2-MIB::hpnicfIfQoSHardwareQueueRunInfoTable,,not-accessible,,current,,A table of queue statistic information.
.1.3.6.1.4.1.11.2.14.11.15.2.65.1.1.2.1.1,HPN-ICF-IFQOS2-MIB::hpnicfIfQoSHardwareQueueRunInfoEntry,,not-accessible,ifIndex:hpnicfIfQoSQueueID,current,,Queue statistic information entry.
.1.3.6.1.4.1.11.2.14.11.15.2.65.1.1.2.1.1.1,HPN-ICF-IFQOS2-MIB::hpnicfIfQoSPassPackets,Counter64,read-only,,current,,The number of forwarded packets.
.1.3.6.1.4.1.11.2.14.11.15.2.65.1.1.2.1.1.2,HPN-ICF-IFQOS2-MIB::hpnicfIfQoSDropPackets,Counter64,read-only,,current,,The number of dropped packets.
.1.3.6.1.4.1.11.2.14.11.15.2.65.1.1.2.1.1.3,HPN-ICF-IFQOS2-MIB::hpnicfIfQoSPassBytes,Counter64,read-only,,current,,The bytes of forwarded packets.
.1.3.6.1.4.1.11.2.14.11.15.2.65.1.1.2.1.1.4,HPN-ICF-IFQOS2-MIB::hpnicfIfQoSPassPPS,Unsigned32,read-only,,current,,The PPS of forwarded packets. PPS: packets per second.
.1.3.6.1.4.1.11.2.14.11.15.2.65.1.1.2.1.1.5,HPN-ICF-IFQOS2-MIB::hpnicfIfQoSPassBPS,Unsigned32,read-only,,current,,The BPS of forwarded packets. BPS: bytes per second.
.1.3.6.1.4.1.11.2.14.11.15.2.65.1.1.2.1.1.6,HPN-ICF-IFQOS2-MIB::hpnicfIfQoSDropBytes,Counter64,read-only,,current,,The bytes of dropped packets.
.1.3.6.1.4.1.11.2.14.11.15.2.65.1.1.2.1.1.7,HPN-ICF-IFQOS2-MIB::hpnicfIfQoSQueueLengthInPkts,Unsigned32,read-only,,current,,The max number of packets which the queue can hold.
.1.3.6.1.4.1.11.2.14.11.15.2.65.1.1.2.1.1.8,HPN-ICF-IFQOS2-MIB::hpnicfIfQoSQueueLengthInBytes,Unsigned32,read-only,,current,,The max bytes of packets which the queue can hold.
.1.3.6.1.4.1.11.2.14.11.15.2.65.1.1.2.1.1.9,HPN-ICF-IFQOS2-MIB::hpnicfIfQoSCurQueuePkts,Unsigned32,read-only,,current,,The number of packets in the current queue.
.1.3.6.1.4.1.11.2.14.11.15.2.65.1.1.2.1.1.10,HPN-ICF-IFQOS2-MIB::hpnicfIfQoSCurQueueBytes,Unsigned32,read-only,,current,,The bytes of packets in the current queue.
.1.3.6.1.4.1.11.2.14.11.15.2.65.1.1.2.1.1.11,HPN-ICF-IFQOS2-MIB::hpnicfIfQoSCurQueuePPS,Unsigned32,read-only,,current,,The PPS of packets in the current queue.
.1.3.6.1.4.1.11.2.14.11.15.2.65.1.1.2.1.1.12,HPN-ICF-IFQOS2-MIB::hpnicfIfQoSCurQueueBPS,Unsigned32,read-only,,current,,The BPS of packets in the current queue.
.1.3.6.1.4.1.11.2.14.11.15.2.65.1.1.2.1.1.13,HPN-ICF-IFQOS2-MIB::hpnicfIfQoSTailDropPkts,Counter64,read-only,,current,,The number of packets dropped by tail dropping.
.1.3.6.1.4.1.11.2.14.11.15.2.65.1.1.2.1.1.14,HPN-ICF-IFQOS2-MIB::hpnicfIfQoSTailDropBytes,Counter64,read-only,,current,,The bytes of packets dropped by tail dropping.
.1.3.6.1.4.1.11.2.14.11.15.2.65.1.1.2.1.1.15,HPN-ICF-IFQOS2-MIB::hpnicfIfQoSTailDropPPS,Unsigned32,read-only,,current,,The PPS of packets dropped by tail dropping.
.1.3.6.1.4.1.11.2.14.11.15.2.65.1.1.2.1.1.16,HPN-ICF-IFQOS2-MIB::hpnicfIfQoSTailDropBPS,Unsigned32,read-only,,current,,The BPS of packets dropped by tail dropping.
.1.3.6.1.4.1.11.2.14.11.15.2.65.1.1.2.1.1.17,HPN-ICF-IFQOS2-MIB::hpnicfIfQoSWredDropPkts,Counter64,read-only,,current,,The number of packets dropped by WRED.
.1.3.6.1.4.1.11.2.14.11.15.2.65.1.1.2.1.1.18,HPN-ICF-IFQOS2-MIB::hpnicfIfQoSWredDropBytes,Counter64,read-only,,current,,The bytes of packets dropped by WRED.
.1.3.6.1.4.1.11.2.14.11.15.2.65.1.1.2.1.1.19,HPN-ICF-IFQOS2-MIB::hpnicfIfQoSWredDropPPS,Unsigned32,read-only,,current,,The PPS of packets dropped by WRED.
.1.3.6.1.4.1.11.2.14.11.15.2.65.1.1.2.1.1.20,HPN-ICF-IFQOS2-MIB::hpnicfIfQoSWredDropBPS,Unsigned32,read-only,,current,,The BPS of packets dropped by WRED.
.1.3.6.1.4.1.11.2.14.11.15.2.65.1.1.2.2,HPN-ICF-IFQOS2-MIB::hpnicfIfQoSHQueueTcpRunInfoTable,,not-accessible,,current,,A table of queue statistic information about TCP and non-TCP packets.
.1.3.6.1.4.1.11.2.14.11.15.2.65.1.1.2.2.1,HPN-ICF-IFQOS2-MIB::hpnicfIfQoSHQueueTcpRunInfoEntry,,not-accessible,ifIndex:hpnicfIfQoSQueueID,current,,Queue statistic information entry about TCP and non-TCP packets.
.1.3.6.1.4.1.11.2.14.11.15.2.65.1.1.2.2.1.1,HPN-ICF-IFQOS2-MIB::hpnicfIfQoSWredDropLPreNTcpPkts,Counter64,read-only,,current,,The number of low-precedence non-TCP packets dropped by WRED.
.1.3.6.1.4.1.11.2.14.11.15.2.65.1.1.2.2.1.2,HPN-ICF-IFQOS2-MIB::hpnicfIfQoSWredDropLPreNTcpBytes,Counter64,read-only,,current,,The bytes of low-precedence non-TCP packets dropped by WRED.
.1.3.6.1.4.1.11.2.14.11.15.2.65.1.1.2.2.1.3,HPN-ICF-IFQOS2-MIB::hpnicfIfQoSWredDropLPreNTcpPPS,Unsigned32,read-only,,current,,The PPS of low-precedence non-TCP packets dropped by WRED. PPS: packets per second.
.1.3.6.1.4.1.11.2.14.11.15.2.65.1.1.2.2.1.4,HPN-ICF-IFQOS2-MIB::hpnicfIfQoSWredDropLPreNTcpBPS,Unsigned32,read-only,,current,,The BPS of low-precedence non-TCP packets dropped by WRED. BPS: bytes per second.
.1.3.6.1.4.1.11.2.14.11.15.2.65.1.1.2.2.1.5,HPN-ICF-IFQOS2-MIB::hpnicfIfQoSWredDropLPreTcpPkts,Counter64,read-only,,current,,The number of low-precedence TCP packets dropped by WRED.
.1.3.6.1.4.1.11.2.14.11.15.2.65.1.1.2.2.1.6,HPN-ICF-IFQOS2-MIB::hpnicfIfQoSWredDropLPreTcpBytes,Counter64,read-only,,current,,The bytes of low-precedence TCP packets dropped by WRED.
.1.3.6.1.4.1.11.2.14.11.15.2.65.1.1.2.2.1.7,HPN-ICF-IFQOS2-MIB::hpnicfIfQoSWredDropLPreTcpPPS,Unsigned32,read-only,,current,,The PPS of low-precedence TCP packets dropped by WRED.
.1.3.6.1.4.1.11.2.14.11.15.2.65.1.1.2.2.1.8,HPN-ICF-IFQOS2-MIB::hpnicfIfQoSWredDropLPreTcpBPS,Unsigned32,read-only,,current,,The BPS of low-precedence TCP packets dropped by WRED.
.1.3.6.1.4.1.11.2.14.11.15.2.65.1.1.2.2.1.9,HPN-ICF-IFQOS2-MIB::hpnicfIfQoSWredDropHPreNTcpPkts,Counter64,read-only,,current,,The number of high-precedence non-TCP packets dropped by WRED.
.1.3.6.1.4.1.11.2.14.11.15.2.65.1.1.2.2.1.10,HPN-ICF-IFQOS2-MIB::hpnicfIfQoSWredDropHPreNTcpBytes,Counter64,read-only,,current,,The bytes of high-precedence non-TCP packets dropped by WRED.
.1.3.6.1.4.1.11.2.14.11.15.2.65.1.1.2.2.1.11,HPN-ICF-IFQOS2-MIB::hpnicfIfQoSWredDropHPreNTcpPPS,Unsigned32,read-only,,current,,The PPS of high-precedence non-TCP packets dropped by WRED.
.1.3.6.1.4.1.11.2.14.11.15.2.65.1.1.2.2.1.12,HPN-ICF-IFQOS2-MIB::hpnicfIfQoSWredDropHPreNTcpBPS,Unsigned32,read-only,,current,,The BPS of high-precedence non-TCP packets dropped by WRED.
.1.3.6.1.4.1.11.2.14.11.15.2.65.1.1.2.2.1.13,HPN-ICF-IFQOS2-MIB::hpnicfIfQoSWredDropHPreTcpPkts,Counter64,read-only,,current,,The number of high-precedence TCP packets dropped by WRED.
.1.3.6.1.4.1.11.2.14.11.15.2.65.1.1.2.2.1.14,HPN-ICF-IFQOS2-MIB::hpnicfIfQoSWredDropHPreTcpBytes,Counter64,read-only,,current,,The bytes of high-precedence TCP packets dropped by WRED.
.1.3.6.1.4.1.11.2.14.11.15.2.65.1.1.2.2.1.15,HPN-ICF-IFQOS2-MIB::hpnicfIfQoSWredDropHPreTcpPPS,Unsigned32,read-only,,current,,The PPS of high-precedence TCP packets dropped by WRED.
.1.3.6.1.4.1.11.2.14.11.15.2.65.1.1.2.2.1.16,HPN-ICF-IFQOS2-MIB::hpnicfIfQoSWredDropHPreTcpBPS,Unsigned32,read-only,,current,,The BPS of high-precedence TCP packets dropped by WRED.
.1.3.6.1.4.1.11.2.14.11.15.2.65.1.2,HPN-ICF-IFQOS2-MIB::hpnicfIfQoSSoftwareQueueObjects,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.2.65.1.2.1,HPN-ICF-IFQOS2-MIB::hpnicfIfQoSFIFOObject,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.2.65.1.2.1.1,HPN-ICF-IFQOS2-MIB::hpnicfIfQoSFIFOConfigTable,,not-accessible,,current,,A table of FIFO queue information.
.1.3.6.1.4.1.11.2.14.11.15.2.65.1.2.1.1.1,HPN-ICF-IFQOS2-MIB::hpnicfIfQoSFIFOConfigEntry,,not-accessible,ifIndex,current,,FIFO queue information entry.
.1.3.6.1.4.1.11.2.14.11.15.2.65.1.2.1.1.1.1,HPN-ICF-IFQOS2-MIB::hpnicfIfQoSFIFOMaxQueueLen,Integer32,read-write,,current,,The maximum length of FIFO queue.
.1.3.6.1.4.1.11.2.14.11.15.2.65.1.2.1.2,HPN-ICF-IFQOS2-MIB::hpnicfIfQoSFIFORunInfoTable,,not-accessible,,current,,A table of FIFO queue statistic information.
.1.3.6.1.4.1.11.2.14.11.15.2.65.1.2.1.2.1,HPN-ICF-IFQOS2-MIB::hpnicfIfQoSFIFORunInfoEntry,,not-accessible,ifIndex,current,,FIFO queue statistic information entry.
.1.3.6.1.4.1.11.2.14.11.15.2.65.1.2.1.2.1.1,HPN-ICF-IFQOS2-MIB::hpnicfIfQoSFIFOSize,Integer32,read-only,,current,,The number of packet in FIFO queue.
.1.3.6.1.4.1.11.2.14.11.15.2.65.1.2.1.2.1.2,HPN-ICF-IFQOS2-MIB::hpnicfIfQoSFIFODiscardPackets,Counter64,read-only,,current,,The number of discard packet.
.1.3.6.1.4.1.11.2.14.11.15.2.65.1.2.2,HPN-ICF-IFQOS2-MIB::hpnicfIfQoSPQObject,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.2.65.1.2.2.1,HPN-ICF-IFQOS2-MIB::hpnicfIfQoSPQConfigGroup,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.2.65.1.2.2.1.1,HPN-ICF-IFQOS2-MIB::hpnicfIfQoSPQDefaultTable,,not-accessible,,current,,A table of priority queue default configuration information.
.1.3.6.1.4.1.11.2.14.11.15.2.65.1.2.2.1.1.1,HPN-ICF-IFQOS2-MIB::hpnicfIfQoSPQDefaultEntry,,not-accessible,hpnicfIfQoSPQListNumber,current,,Priority queue default configuration information entry.
.1.3.6.1.4.1.11.2.14.11.15.2.65.1.2.2.1.1.1.1,HPN-ICF-IFQOS2-MIB::hpnicfIfQoSPQListNumber,Integer32,not-accessible,,current,,Priority queue list number.
.1.3.6.1.4.1.11.2.14.11.15.2.65.1.2.2.1.1.1.2,HPN-ICF-IFQOS2-MIB::hpnicfIfQoSPQDefaultQueueType,INTEGER,read-write,,current,top(1):middle(2):normal(3):bottom(4),Specify priority queue that packets put into by default.
.1.3.6.1.4.1.11.2.14.11.15.2.65.1.2.2.1.2,HPN-ICF-IFQOS2-MIB::hpnicfIfQoSPQQueueLengthTable,,not-accessible,,current,,A table of queue length of priority queue configuration information.
.1.3.6.1.4.1.11.2.14.11.15.2.65.1.2.2.1.2.1,HPN-ICF-IFQOS2-MIB::hpnicfIfQoSPQQueueLengthEntry,,not-accessible,hpnicfIfQoSPQListNumber:hpnicfIfQoSPQQueueLengthType,current,,Queue length of priority queue configuration information entry.
.1.3.6.1.4.1.11.2.14.11.15.2.65.1.2.2.1.2.1.1,HPN-ICF-IFQOS2-MIB::hpnicfIfQoSPQQueueLengthType,INTEGER,not-accessible,,current,top(1):middle(2):normal(3):bottom(4),Type of priority queue.
.1.3.6.1.4.1.11.2.14.11.15.2.65.1.2.2.1.2.1.2,HPN-ICF-IFQOS2-MIB::hpnicfIfQoSPQQueueLengthValue,Integer32,read-write,,current,,The size of priority queue.
.1.3.6.1.4.1.11.2.14.11.15.2.65.1.2.2.1.3,HPN-ICF-IFQOS2-MIB::hpnicfIfQoSPQClassRuleTable,,not-accessible,,current,,A table of class rule of priority queue information.
.1.3.6.1.4.1.11.2.14.11.15.2.65.1.2.2.1.3.1,HPN-ICF-IFQOS2-MIB::hpnicfIfQoSPQClassRuleEntry,,not-accessible,hpnicfIfQoSPQListNumber:hpnicfIfQoSPQClassRuleType:hpnicfIfQoSPQClassRuleValue,current,,A table of class rule of priority queue information.
.1.3.6.1.4.1.11.2.14.11.15.2.65.1.2.2.1.3.1.1,HPN-ICF-IFQOS2-MIB::hpnicfIfQoSPQClassRuleType,INTEGER,not-accessible,,current,interface(1):ipv4acl(2):ipv6acl(3):fragments(4):greater-than(5):less-than(6):tcp(7):udp(8):ipall(9):mpls(10),Type of class rule. 'ipall' means all ip packets.
.1.3.6.1.4.1.11.2.14.11.15.2.65.1.2.2.1.3.1.2,HPN-ICF-IFQOS2-MIB::hpnicfIfQoSPQClassRuleValue,Integer32,not-accessible,,current,,Value of class rule. interface : ifIndex ipv4acl : 2000..3999 ipv6acl : 2000..3999, 10000..42767 greater-than : 0..65535 less-than : 0..65535 tcp : 0..65535 udp : 0..65535 mpls(exp-mask) : 1..255 other types: 0 
.1.3.6.1.4.1.11.2.14.11.15.2.65.1.2.2.1.3.1.3,HPN-ICF-IFQOS2-MIB::hpnicfIfQoSPQClassRuleQueueType,INTEGER,read-create,,current,top(1):middle(2):normal(3):bottom(4),Specify the queue for matched packets.
.1.3.6.1.4.1.11.2.14.11.15.2.65.1.2.2.1.3.1.4,HPN-ICF-IFQOS2-MIB::hpnicfIfQoSPQClassRowStatus,INTEGER,read-create,,current,active(1):notInService(2):notReady(3):createAndGo(4):createAndWait(5):destroy(6),RowStatus.
.1.3.6.1.4.1.11.2.14.11.15.2.65.1.2.2.1.4,HPN-ICF-IFQOS2-MIB::hpnicfIfQoSPQApplyTable,,not-accessible,,current,,A table of priority queue instance.
.1.3.6.1.4.1.11.2.14.11.15.2.65.1.2.2.1.4.1,HPN-ICF-IFQOS2-MIB::hpnicfIfQoSPQApplyEntry,,not-accessible,ifIndex,current,,Priority queue instance information.
.1.3.6.1.4.1.11.2.14.11.15.2.65.1.2.2.1.4.1.1,HPN-ICF-IFQOS2-MIB::hpnicfIfQoSPQApplyListNumber,Integer32,read-create,,current,,Priority queue list number.
.1.3.6.1.4.1.11.2.14.11.15.2.65.1.2.2.1.4.1.2,HPN-ICF-IFQOS2-MIB::hpnicfIfQoSPQApplyRowStatus,INTEGER,read-create,,current,active(1):notInService(2):notReady(3):createAndGo(4):createAndWait(5):destroy(6),RowStatus.
.1.3.6.1.4.1.11.2.14.11.15.2.65.1.2.2.2,HPN-ICF-IFQOS2-MIB::hpnicfIfQoSPQRunInfoGroup,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.2.65.1.2.2.2.1,HPN-ICF-IFQOS2-MIB::hpnicfIfQoSPQRunInfoTable,,not-accessible,,current,,A table of priority queue statistic information.
.1.3.6.1.4.1.11.2.14.11.15.2.65.1.2.2.2.1.1,HPN-ICF-IFQOS2-MIB::hpnicfIfQoSPQRunInfoEntry,,not-accessible,ifIndex:hpnicfIfQoSPQType,current,,Priority queue statistic information entry.
.1.3.6.1.4.1.11.2.14.11.15.2.65.1.2.2.2.1.1.1,HPN-ICF-IFQOS2-MIB::hpnicfIfQoSPQType,INTEGER,not-accessible,,current,top(1):middle(2):normal(3):bottom(4),The type of priority queue.
.1.3.6.1.4.1.11.2.14.11.15.2.65.1.2.2.2.1.1.2,HPN-ICF-IFQOS2-MIB::hpnicfIfQoSPQSize,Integer32,read-only,,current,,The number of packets in the priority queue.
.1.3.6.1.4.1.11.2.14.11.15.2.65.1.2.2.2.1.1.3,HPN-ICF-IFQOS2-MIB::hpnicfIfQoSPQLength,Integer32,read-only,,current,,The maximum length of priority queue.
.1.3.6.1.4.1.11.2.14.11.15.2.65.1.2.2.2.1.1.4,HPN-ICF-IFQOS2-MIB::hpnicfIfQoSPQDiscardPackets,Counter64,read-only,,current,,The packet number of priority queue discard.
.1.3.6.1.4.1.11.2.14.11.15.2.65.1.2.3,HPN-ICF-IFQOS2-MIB::hpnicfIfQoSCQObject,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.2.65.1.2.3.1,HPN-ICF-IFQOS2-MIB::hpnicfIfQoSCQConfigGroup,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.2.65.1.2.3.1.1,HPN-ICF-IFQOS2-MIB::hpnicfIfQoSCQDefaultTable,,not-accessible,,current,,A table of custom queue default configuration information.
.1.3.6.1.4.1.11.2.14.11.15.2.65.1.2.3.1.1.1,HPN-ICF-IFQOS2-MIB::hpnicfIfQoSCQDefaultEntry,,not-accessible,hpnicfIfQoSCQListNumber,current,,Custom queue default configuration information entry.
.1.3.6.1.4.1.11.2.14.11.15.2.65.1.2.3.1.1.1.1,HPN-ICF-IFQOS2-MIB::hpnicfIfQoSCQListNumber,Integer32,not-accessible,,current,,Custom queue list number.
.1.3.6.1.4.1.11.2.14.11.15.2.65.1.2.3.1.1.1.2,HPN-ICF-IFQOS2-MIB::hpnicfIfQoSCQDefaultQueueID,Integer32,read-write,,current,,Default queue ID.
.1.3.6.1.4.1.11.2.14.11.15.2.65.1.2.3.1.2,HPN-ICF-IFQOS2-MIB::hpnicfIfQoSCQQueueLengthTable,,not-accessible,,current,,A table of queue length of custom queue configuration information.
.1.3.6.1.4.1.11.2.14.11.15.2.65.1.2.3.1.2.1,HPN-ICF-IFQOS2-MIB::hpnicfIfQoSCQQueueLengthEntry,,not-accessible,hpnicfIfQoSCQListNumber:hpnicfIfQoSCQQueueID,current,,Queue length of custom queue configuration information entry.
.1.3.6.1.4.1.11.2.14.11.15.2.65.1.2.3.1.2.1.1,HPN-ICF-IFQOS2-MIB::hpnicfIfQoSCQQueueID,Integer32,not-accessible,,current,,Custom queue index.
.1.3.6.1.4.1.11.2.14.11.15.2.65.1.2.3.1.2.1.2,HPN-ICF-IFQOS2-MIB::hpnicfIfQoSCQQueueLength,Integer32,read-write,,current,,The size of custom queue.
.1.3.6.1.4.1.11.2.14.11.15.2.65.1.2.3.1.2.1.3,HPN-ICF-IFQOS2-MIB::hpnicfIfQoSCQQueueServing,Integer32,read-write,,current,,The maximum bytes that the specified queue can transmit in each turn.
.1.3.6.1.4.1.11.2.14.11.15.2.65.1.2.3.1.3,HPN-ICF-IFQOS2-MIB::hpnicfIfQoSCQClassRuleTable,,not-accessible,,current,,A table of class rule of custom queue information.
.1.3.6.1.4.1.11.2.14.11.15.2.65.1.2.3.1.3.1,HPN-ICF-IFQOS2-MIB::hpnicfIfQoSCQClassRuleEntry,,not-accessible,hpnicfIfQoSCQListNumber:hpnicfIfQoSCQClassRuleType:hpnicfIfQoSCQClassRuleValue,current,,A table of class rule of custom queue information.
.1.3.6.1.4.1.11.2.14.11.15.2.65.1.2.3.1.3.1.1,HPN-ICF-IFQOS2-MIB::hpnicfIfQoSCQClassRuleType,INTEGER,not-accessible,,current,interface(1):ipv4acl(2):ipv6acl(3):fragments(4):greater-than(5):less-than(6):tcp(7):udp(8):ipall(9):mpls(10),Type of class rule. 'ipall' means all ip packets.
.1.3.6.1.4.1.11.2.14.11.15.2.65.1.2.3.1.3.1.2,HPN-ICF-IFQOS2-MIB::hpnicfIfQoSCQClassRuleValue,Integer32,not-accessible,,current,,Value of class rule. interface : ifIndex ipv4acl : 2000..3999 ipv6acl : 2000..42767 greater-than : 0..65535 less-than : 0..65535 tcp : 0..65535 udp : 0..65535 mpls(exp-mask) : 1..255 other types: 0. 
.1.3.6.1.4.1.11.2.14.11.15.2.65.1.2.3.1.3.1.3,HPN-ICF-IFQOS2-MIB::hpnicfIfQoSCQClassRuleQueueID,Integer32,read-create,,current,,Specify the queue for matched packets.
.1.3.6.1.4.1.11.2.14.11.15.2.65.1.2.3.1.3.1.4,HPN-ICF-IFQOS2-MIB::hpnicfIfQoSCQClassRowStatus,INTEGER,read-create,,current,active(1):notInService(2):notReady(3):createAndGo(4):createAndWait(5):destroy(6),RowStatus.
.1.3.6.1.4.1.11.2.14.11.15.2.65.1.2.3.1.4,HPN-ICF-IFQOS2-MIB::hpnicfIfQoSCQApplyTable,,not-accessible,,current,,A table of custom queue instance.
.1.3.6.1.4.1.11.2.14.11.15.2.65.1.2.3.1.4.1,HPN-ICF-IFQOS2-MIB::hpnicfIfQoSCQApplyEntry,,not-accessible,ifIndex,current,,Custom queue instance information.
.1.3.6.1.4.1.11.2.14.11.15.2.65.1.2.3.1.4.1.1,HPN-ICF-IFQOS2-MIB::hpnicfIfQoSCQApplyListNumber,Integer32,read-create,,current,,Custom queue list number.
.1.3.6.1.4.1.11.2.14.11.15.2.65.1.2.3.1.4.1.2,HPN-ICF-IFQOS2-MIB::hpnicfIfQoSCQApplyRowStatus,INTEGER,read-create,,current,active(1):notInService(2):notReady(3):createAndGo(4):createAndWait(5):destroy(6),RowStatus.
.1.3.6.1.4.1.11.2.14.11.15.2.65.1.2.3.2,HPN-ICF-IFQOS2-MIB::hpnicfIfQoSCQRunInfoGroup,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.2.65.1.2.3.2.1,HPN-ICF-IFQOS2-MIB::hpnicfIfQoSCQRunInfoTable,,not-accessible,,current,,A table of custom queue statistic information.
.1.3.6.1.4.1.11.2.14.11.15.2.65.1.2.3.2.1.1,HPN-ICF-IFQOS2-MIB::hpnicfIfQoSCQRunInfoEntry,,not-accessible,ifIndex:hpnicfIfQoSCQQueueID,current,,Custom queue statistic information entry.
.1.3.6.1.4.1.11.2.14.11.15.2.65.1.2.3.2.1.1.1,HPN-ICF-IFQOS2-MIB::hpnicfIfQoSCQRunInfoSize,Integer32,read-only,,current,,The number of packets in the custom queue.
.1.3.6.1.4.1.11.2.14.11.15.2.65.1.2.3.2.1.1.2,HPN-ICF-IFQOS2-MIB::hpnicfIfQoSCQRunInfoLength,Integer32,read-only,,current,,The maximum length of custom queue.
.1.3.6.1.4.1.11.2.14.11.15.2.65.1.2.3.2.1.1.3,HPN-ICF-IFQOS2-MIB::hpnicfIfQoSCQRunInfoDiscardPackets,Counter64,read-only,,current,,The packet number of custom queue discard.
.1.3.6.1.4.1.11.2.14.11.15.2.65.1.2.4,HPN-ICF-IFQOS2-MIB::hpnicfIfQoSWFQObject,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.2.65.1.2.4.1,HPN-ICF-IFQOS2-MIB::hpnicfIfQoSWFQConfigGroup,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.2.65.1.2.4.1.1,HPN-ICF-IFQOS2-MIB::hpnicfIfQoSWFQTable,,not-accessible,,current,,A table of weighted fair queue information.
.1.3.6.1.4.1.11.2.14.11.15.2.65.1.2.4.1.1.1,HPN-ICF-IFQOS2-MIB::hpnicfIfQoSWFQEntry,,not-accessible,ifIndex,current,,Weighted fair queue information entry.
.1.3.6.1.4.1.11.2.14.11.15.2.65.1.2.4.1.1.1.1,HPN-ICF-IFQOS2-MIB::hpnicfIfQoSWFQQueueLength,Integer32,read-create,,current,,The length of weighted fair queue.
.1.3.6.1.4.1.11.2.14.11.15.2.65.1.2.4.1.1.1.2,HPN-ICF-IFQOS2-MIB::hpnicfIfQoSWFQQueueNumber,INTEGER,read-create,,current,size16(1):size32(2):size64(3):size128(4):size256(5):size512(6):size1024(7):size2048(8):size4096(9),The number of weighted fair queue.
.1.3.6.1.4.1.11.2.14.11.15.2.65.1.2.4.1.1.1.3,HPN-ICF-IFQOS2-MIB::hpnicfIfQoSWFQRowStatus,INTEGER,read-create,,current,active(1):notInService(2):notReady(3):createAndGo(4):createAndWait(5):destroy(6),RowStatus.
.1.3.6.1.4.1.11.2.14.11.15.2.65.1.2.4.1.1.1.4,HPN-ICF-IFQOS2-MIB::hpnicfIfQoSWFQType,INTEGER,read-create,,current,ip-precedence(1):dscp(2),The type of weighted fair queue.
.1.3.6.1.4.1.11.2.14.11.15.2.65.1.2.4.2,HPN-ICF-IFQOS2-MIB::hpnicfIfQoSWFQRunInfoGroup,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.2.65.1.2.4.2.1,HPN-ICF-IFQOS2-MIB::hpnicfIfQoSWFQRunInfoTable,,not-accessible,,current,,A table of weighted fair queue statistic information.
.1.3.6.1.4.1.11.2.14.11.15.2.65.1.2.4.2.1.1,HPN-ICF-IFQOS2-MIB::hpnicfIfQoSWFQRunInfoEntry,,not-accessible,ifIndex,current,,Weighted fair queue statistic information entry.
.1.3.6.1.4.1.11.2.14.11.15.2.65.1.2.4.2.1.1.1,HPN-ICF-IFQOS2-MIB::hpnicfIfQoSWFQSize,Integer32,read-only,,current,,The number of packets in all the queues
.1.3.6.1.4.1.11.2.14.11.15.2.65.1.2.4.2.1.1.2,HPN-ICF-IFQOS2-MIB::hpnicfIfQoSWFQLength,Integer32,read-only,,current,,The length of weighted fair queue.
.1.3.6.1.4.1.11.2.14.11.15.2.65.1.2.4.2.1.1.3,HPN-ICF-IFQOS2-MIB::hpnicfIfQoSWFQDiscardPackets,Counter64,read-only,,current,,The number of discarded packets in all the queues.
.1.3.6.1.4.1.11.2.14.11.15.2.65.1.2.4.2.1.1.4,HPN-ICF-IFQOS2-MIB::hpnicfIfQoSWFQHashedActiveQueues,Integer32,read-only,,current,,The number of active queues.
.1.3.6.1.4.1.11.2.14.11.15.2.65.1.2.4.2.1.1.5,HPN-ICF-IFQOS2-MIB::hpnicfIfQoSWFQHashedMaxActiveQueues,Integer32,read-only,,current,,The number of maximum active queues.
.1.3.6.1.4.1.11.2.14.11.15.2.65.1.2.4.2.1.1.6,HPN-ICF-IFQOS2-MIB::hpnicfIfQosWFQhashedTotalQueues,Integer32,read-only,,current,,The number of queues.
.1.3.6.1.4.1.11.2.14.11.15.2.65.1.2.5,HPN-ICF-IFQOS2-MIB::hpnicfIfQoSBandwidthGroup,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.2.65.1.2.5.1,HPN-ICF-IFQOS2-MIB::hpnicfIfQoSBandwidthTable,,not-accessible,,current,,A table of bandwidth of interface information.
.1.3.6.1.4.1.11.2.14.11.15.2.65.1.2.5.1.1,HPN-ICF-IFQOS2-MIB::hpnicfIfQoSBandwidthEntry,,not-accessible,ifIndex,current,,Bandwidth information entry.
.1.3.6.1.4.1.11.2.14.11.15.2.65.1.2.5.1.1.1,HPN-ICF-IFQOS2-MIB::hpnicfIfQoSMaxBandwidth,Integer32,read-create,,current,,The maximum bandwidth of interface. Unit : Kbps
.1.3.6.1.4.1.11.2.14.11.15.2.65.1.2.5.1.1.2,HPN-ICF-IFQOS2-MIB::hpnicfIfQoSReservedBandwidthPct,Integer32,read-create,,current,,Max reserved bandwidth of the interface for QoS.
.1.3.6.1.4.1.11.2.14.11.15.2.65.1.2.5.1.1.3,HPN-ICF-IFQOS2-MIB::hpnicfIfQoSBandwidthRowStatus,INTEGER,read-create,,current,active(1):notInService(2):notReady(3):createAndGo(4):createAndWait(5):destroy(6),RowStatus.
.1.3.6.1.4.1.11.2.14.11.15.2.65.1.2.6,HPN-ICF-IFQOS2-MIB::hpnicfIfQoSQmtokenGroup,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.2.65.1.2.6.1,HPN-ICF-IFQOS2-MIB::hpnicfIfQoSQmtokenTable,,not-accessible,,current,,A table of qmtoken information.
.1.3.6.1.4.1.11.2.14.11.15.2.65.1.2.6.1.1,HPN-ICF-IFQOS2-MIB::hpnicfIfQoSQmtokenEntry,,not-accessible,ifIndex,current,,Qmtoken information entry.
.1.3.6.1.4.1.11.2.14.11.15.2.65.1.2.6.1.1.1,HPN-ICF-IFQOS2-MIB::hpnicfIfQoSQmtokenNumber,Integer32,read-create,,current,,The number of tokens.
.1.3.6.1.4.1.11.2.14.11.15.2.65.1.2.6.1.1.2,HPN-ICF-IFQOS2-MIB::hpnicfIfQoSQmtokenRosStatus,INTEGER,read-create,,current,active(1):notInService(2):notReady(3):createAndGo(4):createAndWait(5):destroy(6),RowStatus
.1.3.6.1.4.1.11.2.14.11.15.2.65.1.2.7,HPN-ICF-IFQOS2-MIB::hpnicfIfQoSRTPQObject,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.2.65.1.2.7.1,HPN-ICF-IFQOS2-MIB::hpnicfIfQoSRTPQConfigGroup,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.2.65.1.2.7.1.1,HPN-ICF-IFQOS2-MIB::hpnicfIfQoSRTPQConfigTable,,not-accessible,,current,,A table of Real-time protocol queue information.
.1.3.6.1.4.1.11.2.14.11.15.2.65.1.2.7.1.1.1,HPN-ICF-IFQOS2-MIB::hpnicfIfQoSRTPQConfigEntry,,not-accessible,ifIndex,current,,The information of Real-time protocol queue entry.
.1.3.6.1.4.1.11.2.14.11.15.2.65.1.2.7.1.1.1.1,HPN-ICF-IFQOS2-MIB::hpnicfIfQoSRTPQStartPort,Integer32,read-create,,current,,Minimum threshold of UDP destination port.
.1.3.6.1.4.1.11.2.14.11.15.2.65.1.2.7.1.1.1.2,HPN-ICF-IFQOS2-MIB::hpnicfIfQoSRTPQEndPort,Integer32,read-create,,current,,Maximum threshold of UDP destination port.
.1.3.6.1.4.1.11.2.14.11.15.2.65.1.2.7.1.1.1.3,HPN-ICF-IFQOS2-MIB::hpnicfIfQoSRTPQReservedBandwidth,Integer32,read-create,,current,,Maximum bandwidth. unit : kbps
.1.3.6.1.4.1.11.2.14.11.15.2.65.1.2.7.1.1.1.4,HPN-ICF-IFQOS2-MIB::hpnicfIfQoSRTPQCbs,Unsigned32,read-create,,current,,Committed Burst Size. Unit: byte
.1.3.6.1.4.1.11.2.14.11.15.2.65.1.2.7.1.1.1.5,HPN-ICF-IFQOS2-MIB::hpnicfIfQoSRTPQRowStatus,INTEGER,read-create,,current,active(1):notInService(2):notReady(3):createAndGo(4):createAndWait(5):destroy(6),RowStatus.
.1.3.6.1.4.1.11.2.14.11.15.2.65.1.2.7.2,HPN-ICF-IFQOS2-MIB::hpnicfIfQoSRTPQRunInfoGroup,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.2.65.1.2.7.2.1,HPN-ICF-IFQOS2-MIB::hpnicfIfQoSRTPQRunInfoTable,,not-accessible,,current,,A table of statistic information of Real-time protocol information.
.1.3.6.1.4.1.11.2.14.11.15.2.65.1.2.7.2.1.1,HPN-ICF-IFQOS2-MIB::hpnicfIfQoSRTPQRunInfoEntry,,not-accessible,ifIndex,current,,Statistic information of Real-time protocol information entry.
.1.3.6.1.4.1.11.2.14.11.15.2.65.1.2.7.2.1.1.1,HPN-ICF-IFQOS2-MIB::hpnicfIfQoSRTPQPacketNumber,Integer32,read-only,,current,,The number of packets in the Real-time protocol queue.
.1.3.6.1.4.1.11.2.14.11.15.2.65.1.2.7.2.1.1.2,HPN-ICF-IFQOS2-MIB::hpnicfIfQoSRTPQPacketSize,Integer32,read-only,,current,,The size of Real-time protocol queue.
.1.3.6.1.4.1.11.2.14.11.15.2.65.1.2.7.2.1.1.3,HPN-ICF-IFQOS2-MIB::hpnicfIfQoSRTPQOutputPackets,Counter64,read-only,,current,,The number of output packets.
.1.3.6.1.4.1.11.2.14.11.15.2.65.1.2.7.2.1.1.4,HPN-ICF-IFQOS2-MIB::hpnicfIfQoSRTPQDiscardPackets,Counter64,read-only,,current,,The number of discard packets.
.1.3.6.1.4.1.11.2.14.11.15.2.65.1.2.8,HPN-ICF-IFQOS2-MIB::hpnicfIfQoSCarListObject,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.2.65.1.2.8.1,HPN-ICF-IFQOS2-MIB::hpnicfIfQoCarListGroup,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.2.65.1.2.8.1.1,HPN-ICF-IFQOS2-MIB::hpnicfIfQoSCarlTable,,not-accessible,,current,,Committed Access Rate List(CARL) table.
.1.3.6.1.4.1.11.2.14.11.15.2.65.1.2.8.1.1.1,HPN-ICF-IFQOS2-MIB::hpnicfIfQoSCarlEntry,,not-accessible,hpnicfIfQoSCarlListNum,current,,CARL configuration infomation.
.1.3.6.1.4.1.11.2.14.11.15.2.65.1.2.8.1.1.1.1,HPN-ICF-IFQOS2-MIB::hpnicfIfQoSCarlListNum,Integer32,not-accessible,,current,,The index of the table, which is the CARL number.
.1.3.6.1.4.1.11.2.14.11.15.2.65.1.2.8.1.1.1.2,HPN-ICF-IFQOS2-MIB::hpnicfIfQoSCarlParaType,INTEGER,read-create,,current,macAddress(1):precMask(2):dscpMask(3),Parameter type of the CARL number.
.1.3.6.1.4.1.11.2.14.11.15.2.65.1.2.8.1.1.1.3,HPN-ICF-IFQOS2-MIB::hpnicfIfQoSCarlParaValue,OCTET,read-create,,current,,Parameter value of the CARL table.
.1.3.6.1.4.1.11.2.14.11.15.2.65.1.2.8.1.1.1.4,HPN-ICF-IFQOS2-MIB::hpnicfIfQoSCarlRowStatus,INTEGER,read-create,,current,active(1):notInService(2):notReady(3):createAndGo(4):createAndWait(5):destroy(6),RowStatus.
.1.3.6.1.4.1.11.2.14.11.15.2.65.1.3,HPN-ICF-IFQOS2-MIB::hpnicfIfQoSLineRateObjects,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.2.65.1.3.1,HPN-ICF-IFQOS2-MIB::hpnicfIfQoSLRConfigTable,,not-accessible,,current,,A table of line rate configuration information.
.1.3.6.1.4.1.11.2.14.11.15.2.65.1.3.1.1,HPN-ICF-IFQOS2-MIB::hpnicfIfQoSLRConfigEntry,,not-accessible,ifIndex:hpnicfIfQoSLRDirection,current,,Line rate configuration information entry.
.1.3.6.1.4.1.11.2.14.11.15.2.65.1.3.1.1.1,HPN-ICF-IFQOS2-MIB::hpnicfIfQoSLRDirection,INTEGER,not-accessible,,current,inbound(1):outbound(2),Line rate on the inbound or outbound of data stream.
.1.3.6.1.4.1.11.2.14.11.15.2.65.1.3.1.1.2,HPN-ICF-IFQOS2-MIB::hpnicfIfQoSLRCir,Unsigned32,read-create,,current,,Committed Information Rate.
.1.3.6.1.4.1.11.2.14.11.15.2.65.1.3.1.1.3,HPN-ICF-IFQOS2-MIB::hpnicfIfQoSLRCbs,Unsigned32,read-create,,current,,Committed Burst Size.
.1.3.6.1.4.1.11.2.14.11.15.2.65.1.3.1.1.4,HPN-ICF-IFQOS2-MIB::hpnicfIfQoSLREbs,Unsigned32,read-create,,current,,Excess Burst Size.
.1.3.6.1.4.1.11.2.14.11.15.2.65.1.3.1.1.5,HPN-ICF-IFQOS2-MIB::hpnicfIfQoSRowStatus,INTEGER,read-create,,current,active(1):notInService(2):notReady(3):createAndGo(4):createAndWait(5):destroy(6),RowStatus.
.1.3.6.1.4.1.11.2.14.11.15.2.65.1.3.1.1.6,HPN-ICF-IFQOS2-MIB::hpnicfIfQoSLRPir,Unsigned32,read-create,,current,,Peak Information Rate.
.1.3.6.1.4.1.11.2.14.11.15.2.65.1.3.1.1.7,HPN-ICF-IFQOS2-MIB::hpnicfIfQoSLRUnit,INTEGER,read-create,,current,unitAbsolute(1):unitPercent(2),LR Unit: Absolute, Unit Kbps (1) Percent, Unit % (2) 
.1.3.6.1.4.1.11.2.14.11.15.2.65.1.3.2,HPN-ICF-IFQOS2-MIB::hpnicfIfQoSLRRunInfoTable,,not-accessible,,current,,A table of line rate run info information.
.1.3.6.1.4.1.11.2.14.11.15.2.65.1.3.2.1,HPN-ICF-IFQOS2-MIB::hpnicfIfQoSLRRunInfoEntry,,not-accessible,ifIndex:hpnicfIfQoSLRDirection,current,,Line rate run info information entry.
.1.3.6.1.4.1.11.2.14.11.15.2.65.1.3.2.1.1,HPN-ICF-IFQOS2-MIB::hpnicfIfQoSLRRunInfoPassedPackets,Counter64,read-only,,current,,The number of passed packets.
.1.3.6.1.4.1.11.2.14.11.15.2.65.1.3.2.1.2,HPN-ICF-IFQOS2-MIB::hpnicfIfQoSLRRunInfoPassedBytes,Counter64,read-only,,current,,The number of passed bytes.
.1.3.6.1.4.1.11.2.14.11.15.2.65.1.3.2.1.3,HPN-ICF-IFQOS2-MIB::hpnicfIfQoSLRRunInfoDelayedPackets,Counter64,read-only,,current,,The number of delayed packets.
.1.3.6.1.4.1.11.2.14.11.15.2.65.1.3.2.1.4,HPN-ICF-IFQOS2-MIB::hpnicfIfQoSLRRunInfoDelayedBytes,Counter64,read-only,,current,,The number of delayed bytes.
.1.3.6.1.4.1.11.2.14.11.15.2.65.1.3.2.1.5,HPN-ICF-IFQOS2-MIB::hpnicfIfQoSLRRunInfoActiveShaping,INTEGER,read-only,,current,active(1):inactive(2),The flag of shaping.
.1.3.6.1.4.1.11.2.14.11.15.2.65.1.4,HPN-ICF-IFQOS2-MIB::hpnicfIfQoSCARObjects,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.2.65.1.4.1,HPN-ICF-IFQOS2-MIB::hpnicfIfQoSAggregativeCarGroup,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.2.65.1.4.1.1,HPN-ICF-IFQOS2-MIB::hpnicfIfQoSAggregativeCarNextIndex,Integer32,read-only,,current,,This object contains an appropriate value to be used for hpnicfIfQoSAggregativeCarIndex when creating rows in the hpnicfIfQoSAggregativeCarConfigTable. Begin with 1. 
.1.3.6.1.4.1.11.2.14.11.15.2.65.1.4.1.2,HPN-ICF-IFQOS2-MIB::hpnicfIfQoSAggregativeCarConfigTable,,not-accessible,,current,,A table of aggregative car information.
.1.3.6.1.4.1.11.2.14.11.15.2.65.1.4.1.2.1,HPN-ICF-IFQOS2-MIB::hpnicfIfQoSAggregativeCarConfigEntry,,not-accessible,hpnicfIfQoSAggregativeCarIndex,current,,Aggregative car information.
.1.3.6.1.4.1.11.2.14.11.15.2.65.1.4.1.2.1.1,HPN-ICF-IFQOS2-MIB::hpnicfIfQoSAggregativeCarIndex,Integer32,not-accessible,,current,,The index of aggregative car.
.1.3.6.1.4.1.11.2.14.11.15.2.65.1.4.1.2.1.2,HPN-ICF-IFQOS2-MIB::hpnicfIfQoSAggregativeCarName,OCTET,read-create,,current,,The name of aggregative car.
.1.3.6.1.4.1.11.2.14.11.15.2.65.1.4.1.2.1.3,HPN-ICF-IFQOS2-MIB::hpnicfIfQoSAggregativeCarCir,Unsigned32,read-create,,current,,Committed-information-rate. Unit : kbps
.1.3.6.1.4.1.11.2.14.11.15.2.65.1.4.1.2.1.4,HPN-ICF-IFQOS2-MIB::hpnicfIfQoSAggregativeCarCbs,Unsigned32,read-create,,current,,Committed-burst-size. Unit : byte
.1.3.6.1.4.1.11.2.14.11.15.2.65.1.4.1.2.1.5,HPN-ICF-IFQOS2-MIB::hpnicfIfQoSAggregativeCarEbs,Unsigned32,read-create,,current,,Excess-burst-size. Unit : byte
.1.3.6.1.4.1.11.2.14.11.15.2.65.1.4.1.2.1.6,HPN-ICF-IFQOS2-MIB::hpnicfIfQoSAggregativeCarPir,Unsigned32,read-create,,current,,Peak-information-rate. Unit : kbps
.1.3.6.1.4.1.11.2.14.11.15.2.65.1.4.1.2.1.7,HPN-ICF-IFQOS2-MIB::hpnicfIfQoSAggregativeCarGreenActionType,INTEGER,read-create,,current,invalid(0):pass(1):continue(2):discard(3):remark(4):remark-ip-continue(5):remark-ip-pass(6):remark-mplsexp-continue(7):remark-mplsexp-pass(8):remark-dscp-continue(9):remark-dscp-pass(10):remark-dot1p-continue(11):remark-dot1p-pass(12):remark-atm-clp-continue(13):remark-atm-clp-pass(14):remark-fr-de-continue(15):remark-fr-de-pass(16),Supported green action: invalid(0), pass(1), discard(3), remark(4), remark-ip-pass(6), remark-mplsexp-pass(8), remark-dscp-pass(10), Hardware QoS : pass, discard, remark. Software QoS : pass, discard, remark-ip-pass(6), remark-mplsexp-pass(8), remark-dscp-pass(10). 'invalid' is returned only when getting value from software QoS. 
.1.3.6.1.4.1.11.2.14.11.15.2.65.1.4.1.2.1.8,HPN-ICF-IFQOS2-MIB::hpnicfIfQoSAggregativeCarGreenActionValue,Integer32,read-create,,current,,The value is to remark When green action is remarking. For remark-dscp-pass, the range is 0~63; For remark-ip-pass and remark-mplsexp-pass, the range is 0~7; Only software QoS support this node. 255 is returned only when getting value from hardware QoS or when action being pass, discard of software QoS. 255 can't be set. 
.1.3.6.1.4.1.11.2.14.11.15.2.65.1.4.1.2.1.9,HPN-ICF-IFQOS2-MIB::hpnicfIfQoSAggregativeCarYellowActionType,INTEGER,read-create,,current,invalid(0):pass(1):continue(2):discard(3):remark(4):remark-ip-continue(5):remark-ip-pass(6):remark-mplsexp-continue(7):remark-mplsexp-pass(8):remark-dscp-continue(9):remark-dscp-pass(10):remark-dot1p-continue(11):remark-dot1p-pass(12):remark-atm-clp-continue(13):remark-atm-clp-pass(14):remark-fr-de-continue(15):remark-fr-de-pass(16),Supported yellow action: invalid(0), pass(1), discard(3), remark(4), remark-ip-pass(6), remark-mplsexp-pass(8), remark-dscp-pass(10), Hardware QoS : pass, discard, remark. Software QoS : pass, discard, remark-ip-pass(6), remark-mplsexp-pass(8), remark-dscp-pass(10). 'invalid' is returned only when getting value from software QoS. 
.1.3.6.1.4.1.11.2.14.11.15.2.65.1.4.1.2.1.10,HPN-ICF-IFQOS2-MIB::hpnicfIfQoSAggregativeCarYellowActionValue,Integer32,read-create,,current,,The value is to remark When yellow action is remarking. For remark-dscp-pass, the range is 0~63; For remark-ip-pass and remark-mplsexp-pass, the range is 0~7; Only software QoS support this node. 255 is returned only when getting value from hardware QoS or when action being pass, discard of software QoS. 255 can't be set. 
.1.3.6.1.4.1.11.2.14.11.15.2.65.1.4.1.2.1.11,HPN-ICF-IFQOS2-MIB::hpnicfIfQoSAggregativeCarRedActionType,INTEGER,read-create,,current,invalid(0):pass(1):continue(2):discard(3):remark(4):remark-ip-continue(5):remark-ip-pass(6):remark-mplsexp-continue(7):remark-mplsexp-pass(8):remark-dscp-continue(9):remark-dscp-pass(10):remark-dot1p-continue(11):remark-dot1p-pass(12):remark-atm-clp-continue(13):remark-atm-clp-pass(14):remark-fr-de-continue(15):remark-fr-de-pass(16),Supported red action: invalid(0), pass(1), discard(3), remark(4), remark-ip-pass(6), remark-mplsexp-pass(8), remark-dscp-pass(10), Hardware QoS : pass, discard, remark. Software QoS : pass, discard, remark-ip-pass(6), remark-mplsexp-pass(8), remark-dscp-pass(10). 'invalid' is returned only when getting value from software QoS. 
.1.3.6.1.4.1.11.2.14.11.15.2.65.1.4.1.2.1.12,HPN-ICF-IFQOS2-MIB::hpnicfIfQoSAggregativeCarRedActionValue,Integer32,read-create,,current,,The value is to remark When red action is remarking. For remark-dscp-pass, the range is 0~63; For remark-ip-pass and remark-mplsexp-pass, the range is 0~7; Only software QoS support this node. 255 is returned only when getting value from hardware QoS or when action being pass, discard of software QoS. 255 can't be set. 
.1.3.6.1.4.1.11.2.14.11.15.2.65.1.4.1.2.1.13,HPN-ICF-IFQOS2-MIB::hpnicfIfQoSAggregativeCarType,INTEGER,read-create,,current,aggregative(1):notAggregative(2),The type of aggregative CAR. The enumeration 'aggregative' indicates that the ports with a same aggregative CAR use one token bulk. The enumeration 'notAggregative' indicates that each port uses one token bulk. 
.1.3.6.1.4.1.11.2.14.11.15.2.65.1.4.1.2.1.14,HPN-ICF-IFQOS2-MIB::hpnicfIfQoSAggregativeCarRowStatus,INTEGER,read-create,,current,active(1):notInService(2):notReady(3):createAndGo(4):createAndWait(5):destroy(6),RowStatus.
.1.3.6.1.4.1.11.2.14.11.15.2.65.1.4.1.3,HPN-ICF-IFQOS2-MIB::hpnicfIfQoSAggregativeCarApplyTable,,not-accessible,,current,,A table of aggregative car instance.
.1.3.6.1.4.1.11.2.14.11.15.2.65.1.4.1.3.1,HPN-ICF-IFQOS2-MIB::hpnicfIfQoSAggregativeCarApplyEntry,,not-accessible,ifIndex:hpnicfIfQoSAggregativeCarApplyDirection:hpnicfIfQoSAggregativeCarApplyRuleType:hpnicfIfQoSAggregativeCarApplyRuleValue,current,,Aggregative car instance information.
.1.3.6.1.4.1.11.2.14.11.15.2.65.1.4.1.3.1.1,HPN-ICF-IFQOS2-MIB::hpnicfIfQoSAggregativeCarApplyDirection,INTEGER,not-accessible,,current,inbound(1):outbound(2),Direction.
.1.3.6.1.4.1.11.2.14.11.15.2.65.1.4.1.3.1.2,HPN-ICF-IFQOS2-MIB::hpnicfIfQoSAggregativeCarApplyRuleType,INTEGER,not-accessible,,current,ipv4acl(1):ipv6acl(2):carl(3):any(4),The type of class rule.
.1.3.6.1.4.1.11.2.14.11.15.2.65.1.4.1.3.1.3,HPN-ICF-IFQOS2-MIB::hpnicfIfQoSAggregativeCarApplyRuleValue,Integer32,not-accessible,,current,,The number of class rule. ipv4acl : 2000..5999 ipv6acl : 2000..42767 carl : 1..16 other types: 0. 
.1.3.6.1.4.1.11.2.14.11.15.2.65.1.4.1.3.1.4,HPN-ICF-IFQOS2-MIB::hpnicfIfQoSAggregativeCarApplyCarIndex,Integer32,read-create,,current,,The index of aggregative car.
.1.3.6.1.4.1.11.2.14.11.15.2.65.1.4.1.3.1.5,HPN-ICF-IFQOS2-MIB::hpnicfIfQoSAggregativeCarApplyRowStatus,INTEGER,read-create,,current,active(1):notInService(2):notReady(3):createAndGo(4):createAndWait(5):destroy(6),RowStatus.
.1.3.6.1.4.1.11.2.14.11.15.2.65.1.4.1.4,HPN-ICF-IFQOS2-MIB::hpnicfIfQoSAggregativeCarRunInfoTable,,not-accessible,,current,,A table of aggregative car statistic information.
.1.3.6.1.4.1.11.2.14.11.15.2.65.1.4.1.4.1,HPN-ICF-IFQOS2-MIB::hpnicfIfQoSAggregativeCarRunInfoEntry,,not-accessible,hpnicfIfQoSAggregativeCarIndex,current,,Aggregative car statistic information.
.1.3.6.1.4.1.11.2.14.11.15.2.65.1.4.1.4.1.1,HPN-ICF-IFQOS2-MIB::hpnicfIfQoSAggregativeCarGreenPackets,Counter64,read-only,,current,,Number of packets conforming CIR.
.1.3.6.1.4.1.11.2.14.11.15.2.65.1.4.1.4.1.2,HPN-ICF-IFQOS2-MIB::hpnicfIfQoSAggregativeCarGreenBytes,Counter64,read-only,,current,,Number of bytes conforming CIR
.1.3.6.1.4.1.11.2.14.11.15.2.65.1.4.1.4.1.3,HPN-ICF-IFQOS2-MIB::hpnicfIfQoSAggregativeCarYellowPackets,Counter64,read-only,,current,,Number of yellow packets.
.1.3.6.1.4.1.11.2.14.11.15.2.65.1.4.1.4.1.4,HPN-ICF-IFQOS2-MIB::hpnicfIfQoSAggregativeCarYellowBytes,Counter64,read-only,,current,,Number of yellow bytes.
.1.3.6.1.4.1.11.2.14.11.15.2.65.1.4.1.4.1.5,HPN-ICF-IFQOS2-MIB::hpnicfIfQoSAggregativeCarRedPackets,Counter64,read-only,,current,,Number of packets exceeding CIR.
.1.3.6.1.4.1.11.2.14.11.15.2.65.1.4.1.4.1.6,HPN-ICF-IFQOS2-MIB::hpnicfIfQoSAggregativeCarRedBytes,Counter64,read-only,,current,,Number of bytes exceeding CIR.
.1.3.6.1.4.1.11.2.14.11.15.2.65.1.4.2,HPN-ICF-IFQOS2-MIB::hpnicfIfQoSTricolorCarGroup,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.2.65.1.4.2.1,HPN-ICF-IFQOS2-MIB::hpnicfIfQoSTricolorCarConfigTable,,not-accessible,,current,,A table of tricolor car configuration information.
.1.3.6.1.4.1.11.2.14.11.15.2.65.1.4.2.1.1,HPN-ICF-IFQOS2-MIB::hpnicfIfQoSTricolorCarConfigEntry,,not-accessible,ifIndex:hpnicfIfQoSTricolorCarDirection:hpnicfIfQoSTricolorCarType:hpnicfIfQoSTricolorCarValue,current,,Tricolor car configuration information entry.
.1.3.6.1.4.1.11.2.14.11.15.2.65.1.4.2.1.1.1,HPN-ICF-IFQOS2-MIB::hpnicfIfQoSTricolorCarDirection,INTEGER,not-accessible,,current,inbound(1):outbound(2),Direction.
.1.3.6.1.4.1.11.2.14.11.15.2.65.1.4.2.1.1.2,HPN-ICF-IFQOS2-MIB::hpnicfIfQoSTricolorCarType,INTEGER,not-accessible,,current,ipv4acl(1):ipv6acl(2):carl(3):any(4),The index of the table, which is the matching type for the packets on interface: ipv4acl, ipv6acl, carl, any.
.1.3.6.1.4.1.11.2.14.11.15.2.65.1.4.2.1.1.3,HPN-ICF-IFQOS2-MIB::hpnicfIfQoSTricolorCarValue,Integer32,not-accessible,,current,,The index of the table. ipv4acl: the number is ipv4 acl number; ipv6acl: the number is ipv6 acl number; carl: the number is CARL number; any: the number is 0; 
.1.3.6.1.4.1.11.2.14.11.15.2.65.1.4.2.1.1.4,HPN-ICF-IFQOS2-MIB::hpnicfIfQoSTricolorCarCir,Unsigned32,read-create,,current,,Committed Information Rate. Unit: kbps.
.1.3.6.1.4.1.11.2.14.11.15.2.65.1.4.2.1.1.5,HPN-ICF-IFQOS2-MIB::hpnicfIfQoSTricolorCarCbs,Unsigned32,read-create,,current,,Committed Burst Size. Unit: byte.
.1.3.6.1.4.1.11.2.14.11.15.2.65.1.4.2.1.1.6,HPN-ICF-IFQOS2-MIB::hpnicfIfQoSTricolorCarEbs,Unsigned32,read-create,,current,,Excess Burst Size. Unit: byte.
.1.3.6.1.4.1.11.2.14.11.15.2.65.1.4.2.1.1.7,HPN-ICF-IFQOS2-MIB::hpnicfIfQoSTricolorCarPir,Unsigned32,read-create,,current,,Peak Information Rate. Unit: kbps.
.1.3.6.1.4.1.11.2.14.11.15.2.65.1.4.2.1.1.8,HPN-ICF-IFQOS2-MIB::hpnicfIfQoSTricolorCarGreenActionType,INTEGER,read-create,,current,invalid(0):pass(1):continue(2):discard(3):remark(4):remark-ip-continue(5):remark-ip-pass(6):remark-mplsexp-continue(7):remark-mplsexp-pass(8):remark-dscp-continue(9):remark-dscp-pass(10):remark-dot1p-continue(11):remark-dot1p-pass(12):remark-atm-clp-continue(13):remark-atm-clp-pass(14):remark-fr-de-continue(15):remark-fr-de-pass(16),Green Action.
.1.3.6.1.4.1.11.2.14.11.15.2.65.1.4.2.1.1.9,HPN-ICF-IFQOS2-MIB::hpnicfIfQoSTricolorCarGreenActionValue,Integer32,read-create,,current,,The value is to remark when green action is remarking. For remark-dscp-continue and remark-dscp-pass, the range is 0~63; For remark-ip-continue and remark-ip-pass and remark-mplsexp-continue and remark-mplsexp-pass and remark-dot1p-continue and remark-dot1p-pass, the range is 0~7; For remark-fr-de-continue and remark-fr-de-pass and remark-atm-clp-continue and remark-atm-clp-pass, the range is 0~1. 255 is returned only when getting value from hardware QoS or when action being pass, discard of software QoS. 255 can't be set. 
.1.3.6.1.4.1.11.2.14.11.15.2.65.1.4.2.1.1.10,HPN-ICF-IFQOS2-MIB::hpnicfIfQoSTricolorCarYellowActionType,INTEGER,read-create,,current,invalid(0):pass(1):continue(2):discard(3):remark(4):remark-ip-continue(5):remark-ip-pass(6):remark-mplsexp-continue(7):remark-mplsexp-pass(8):remark-dscp-continue(9):remark-dscp-pass(10):remark-dot1p-continue(11):remark-dot1p-pass(12):remark-atm-clp-continue(13):remark-atm-clp-pass(14):remark-fr-de-continue(15):remark-fr-de-pass(16),Yellow Action.
.1.3.6.1.4.1.11.2.14.11.15.2.65.1.4.2.1.1.11,HPN-ICF-IFQOS2-MIB::hpnicfIfQoSTricolorCarYellowActionValue,Integer32,read-create,,current,,The value is to remark when yellow action is remarking. For remark-dscp-continue and remark-dscp-pass, the range is 0~63; For remark-ip-continue and remark-ip-pass and remark-mplsexp-continue and remark-mplsexp-pass and remark-dot1p-continue and remark-dot1p-pass, the range is 0~7; For remark-fr-de-continue and remark-fr-de-pass and remark-atm-clp-continue and remark-atm-clp-pass, the range is 0~1. 255 is returned only when getting value from hardware QoS or when action being pass, discard of software QoS. 255 can't be set. 
.1.3.6.1.4.1.11.2.14.11.15.2.65.1.4.2.1.1.12,HPN-ICF-IFQOS2-MIB::hpnicfIfQoSTricolorCarRedActionType,INTEGER,read-create,,current,invalid(0):pass(1):continue(2):discard(3):remark(4):remark-ip-continue(5):remark-ip-pass(6):remark-mplsexp-continue(7):remark-mplsexp-pass(8):remark-dscp-continue(9):remark-dscp-pass(10):remark-dot1p-continue(11):remark-dot1p-pass(12):remark-atm-clp-continue(13):remark-atm-clp-pass(14):remark-fr-de-continue(15):remark-fr-de-pass(16),Red Action
.1.3.6.1.4.1.11.2.14.11.15.2.65.1.4.2.1.1.13,HPN-ICF-IFQOS2-MIB::hpnicfIfQoSTricolorCarRedActionValue,Integer32,read-create,,current,,The value is to remark when red action is remarking. For remark-dscp-continue and remark-dscp-pass, the range is 0~63; For remark-ip-continue and remark-ip-pass and remark-mplsexp-continue and remark-mplsexp-pass and remark-dot1p-continue and remark-dot1p-pass, the range is 0~7; For remark-fr-de-continue and remark-fr-de-pass and remark-atm-clp-continue and remark-atm-clp-pass, the range is 0~1. 255 is returned only when getting value from hardware QoS or when action being pass, discard of software QoS. 255 can't be set. 
.1.3.6.1.4.1.11.2.14.11.15.2.65.1.4.2.1.1.14,HPN-ICF-IFQOS2-MIB::hpnicfIfQoSTricolorCarRowStatus,INTEGER,read-create,,current,active(1):notInService(2):notReady(3):createAndGo(4):createAndWait(5):destroy(6),RowStatus.
.1.3.6.1.4.1.11.2.14.11.15.2.65.1.4.2.2,HPN-ICF-IFQOS2-MIB::hpnicfIfQoSTricolorCarRunInfoTable,,not-accessible,,current,,A table of tricolor car statistic information.
.1.3.6.1.4.1.11.2.14.11.15.2.65.1.4.2.2.1,HPN-ICF-IFQOS2-MIB::hpnicfIfQoSTricolorCarRunInfoEntry,,not-accessible,ifIndex:hpnicfIfQoSTricolorCarDirection:hpnicfIfQoSTricolorCarType:hpnicfIfQoSTricolorCarValue,current,,Tricolor car statistic information entry.
.1.3.6.1.4.1.11.2.14.11.15.2.65.1.4.2.2.1.1,HPN-ICF-IFQOS2-MIB::hpnicfIfQoSTricolorCarGreenPackets,Counter64,read-only,,current,,The number of green packets.
.1.3.6.1.4.1.11.2.14.11.15.2.65.1.4.2.2.1.2,HPN-ICF-IFQOS2-MIB::hpnicfIfQoSTricolorCarGreenBytes,Counter64,read-only,,current,,The number of green bytes.
.1.3.6.1.4.1.11.2.14.11.15.2.65.1.4.2.2.1.3,HPN-ICF-IFQOS2-MIB::hpnicfIfQoSTricolorCarYellowPackets,Counter64,read-only,,current,,The number of yellow packets.
.1.3.6.1.4.1.11.2.14.11.15.2.65.1.4.2.2.1.4,HPN-ICF-IFQOS2-MIB::hpnicfIfQoSTricolorCarYellowBytes,Counter64,read-only,,current,,The number of yellow bytes.
.1.3.6.1.4.1.11.2.14.11.15.2.65.1.4.2.2.1.5,HPN-ICF-IFQOS2-MIB::hpnicfIfQoSTricolorCarRedPackets,Counter64,read-only,,current,,The number of red packets.
.1.3.6.1.4.1.11.2.14.11.15.2.65.1.4.2.2.1.6,HPN-ICF-IFQOS2-MIB::hpnicfIfQoSTricolorCarRedBytes,Counter64,read-only,,current,,The number of red bytes.
.1.3.6.1.4.1.11.2.14.11.15.2.65.1.5,HPN-ICF-IFQOS2-MIB::hpnicfIfQoSGTSObjects,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.2.65.1.5.1,HPN-ICF-IFQOS2-MIB::hpnicfIfQoSGTSConfigTable,,not-accessible,,current,,A table of generic traffic shaping information.
.1.3.6.1.4.1.11.2.14.11.15.2.65.1.5.1.1,HPN-ICF-IFQOS2-MIB::hpnicfIfQoSGTSConfigEntry,,not-accessible,ifIndex:hpnicfIfQoSGTSClassRuleType:hpnicfIfQoSGTSClassRuleValue,current,,Generic traffic shaping information entry.
.1.3.6.1.4.1.11.2.14.11.15.2.65.1.5.1.1.1,HPN-ICF-IFQOS2-MIB::hpnicfIfQoSGTSClassRuleType,INTEGER,not-accessible,,current,any(1):ipv4acl(2):ipv6acl(3):queue(4),The index of the table, which is the matching type for the packets on interface: ipv4acl, ipv6acl, any, queue. 
.1.3.6.1.4.1.11.2.14.11.15.2.65.1.5.1.1.2,HPN-ICF-IFQOS2-MIB::hpnicfIfQoSGTSClassRuleValue,Integer32,not-accessible,,current,,Value of type. ipv4acl : 2000..4999 ipv6acl : 2000..42767 any : 0 queue : 0..7 
.1.3.6.1.4.1.11.2.14.11.15.2.65.1.5.1.1.3,HPN-ICF-IFQOS2-MIB::hpnicfIfQoSGTSCir,Unsigned32,read-create,,current,,Committed Information Rate. Unit: kbps.
.1.3.6.1.4.1.11.2.14.11.15.2.65.1.5.1.1.4,HPN-ICF-IFQOS2-MIB::hpnicfIfQoSGTSCbs,Unsigned32,read-create,,current,,Committed Burst Size. Unit: byte.
.1.3.6.1.4.1.11.2.14.11.15.2.65.1.5.1.1.5,HPN-ICF-IFQOS2-MIB::hpnicfIfQoSGTSEbs,Unsigned32,read-create,,current,,Excess Burst Size. Unit: byte.
.1.3.6.1.4.1.11.2.14.11.15.2.65.1.5.1.1.6,HPN-ICF-IFQOS2-MIB::hpnicfIfQoSGTSQueueLength,Integer32,read-create,,current,,The length of queue.
.1.3.6.1.4.1.11.2.14.11.15.2.65.1.5.1.1.7,HPN-ICF-IFQOS2-MIB::hpnicfIfQoSGTSConfigRowStatus,INTEGER,read-create,,current,active(1):notInService(2):notReady(3):createAndGo(4):createAndWait(5):destroy(6),RowStatus.
.1.3.6.1.4.1.11.2.14.11.15.2.65.1.5.2,HPN-ICF-IFQOS2-MIB::hpnicfIfQoSGTSRunInfoTable,,not-accessible,,current,,A table of generic traffic shaping's statistic information.
.1.3.6.1.4.1.11.2.14.11.15.2.65.1.5.2.1,HPN-ICF-IFQOS2-MIB::hpnicfIfQoSGTSRunInfoEntry,,not-accessible,ifIndex:hpnicfIfQoSGTSClassRuleType:hpnicfIfQoSGTSClassRuleValue,current,,Generic traffic shaping's statistic information entry.
.1.3.6.1.4.1.11.2.14.11.15.2.65.1.5.2.1.1,HPN-ICF-IFQOS2-MIB::hpnicfIfQoSGTSQueueSize,Integer32,read-only,,current,,The number of packets in the queue.
.1.3.6.1.4.1.11.2.14.11.15.2.65.1.5.2.1.2,HPN-ICF-IFQOS2-MIB::hpnicfIfQoSGTSPassedPackets,Counter64,read-only,,current,,The number of passed packets.
.1.3.6.1.4.1.11.2.14.11.15.2.65.1.5.2.1.3,HPN-ICF-IFQOS2-MIB::hpnicfIfQoSGTSPassedBytes,Counter64,read-only,,current,,The number of passed bytes.
.1.3.6.1.4.1.11.2.14.11.15.2.65.1.5.2.1.4,HPN-ICF-IFQOS2-MIB::hpnicfIfQoSGTSDiscardPackets,Counter64,read-only,,current,,The number of discard packets.
.1.3.6.1.4.1.11.2.14.11.15.2.65.1.5.2.1.5,HPN-ICF-IFQOS2-MIB::hpnicfIfQoSGTSDiscardBytes,Counter64,read-only,,current,,The number of discard bytes.
.1.3.6.1.4.1.11.2.14.11.15.2.65.1.5.2.1.6,HPN-ICF-IFQOS2-MIB::hpnicfIfQoSGTSDelayedPackets,Counter64,read-only,,current,,The number of delayed packets.
.1.3.6.1.4.1.11.2.14.11.15.2.65.1.5.2.1.7,HPN-ICF-IFQOS2-MIB::hpnicfIfQoSGTSDelayedBytes,Counter64,read-only,,current,,The number of delayed bytes.
.1.3.6.1.4.1.11.2.14.11.15.2.65.1.6,HPN-ICF-IFQOS2-MIB::hpnicfIfQoSWREDObjects,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.2.65.1.6.1,HPN-ICF-IFQOS2-MIB::hpnicfIfQoSWredGroupGroup,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.2.65.1.6.1.1,HPN-ICF-IFQOS2-MIB::hpnicfIfQoSWredGroupNextIndex,Integer32,read-only,,current,,This object contains an appropriate value to be used for hpnicfIfQoSWredGroupIndex when creating rows in the hpnicfIfQoSWredGroupTable. Begin with 0. 
.1.3.6.1.4.1.11.2.14.11.15.2.65.1.6.1.2,HPN-ICF-IFQOS2-MIB::hpnicfIfQoSWredGroupTable,,not-accessible,,current,,A table of WRED group information.
.1.3.6.1.4.1.11.2.14.11.15.2.65.1.6.1.2.1,HPN-ICF-IFQOS2-MIB::hpnicfIfQoSWredGroupEntry,,not-accessible,hpnicfIfQoSWredGroupIndex,current,,WRED group information.
.1.3.6.1.4.1.11.2.14.11.15.2.65.1.6.1.2.1.1,HPN-ICF-IFQOS2-MIB::hpnicfIfQoSWredGroupIndex,Integer32,not-accessible,,current,,WRED group index.
.1.3.6.1.4.1.11.2.14.11.15.2.65.1.6.1.2.1.2,HPN-ICF-IFQOS2-MIB::hpnicfIfQoSWredGroupName,OCTET,read-create,,current,,WRED group name.
.1.3.6.1.4.1.11.2.14.11.15.2.65.1.6.1.2.1.3,HPN-ICF-IFQOS2-MIB::hpnicfIfQoSWredGroupType,INTEGER,read-create,,current,userdefined(0):dot1p(1):ippre(2):dscp(3):localpre(4):atmclp(5):frde(6):exp(7):queue(8):dropLevel(9),Type of WRED group.
.1.3.6.1.4.1.11.2.14.11.15.2.65.1.6.1.2.1.4,HPN-ICF-IFQOS2-MIB::hpnicfIfQoSWredGroupWeightingConstant,Integer32,read-create,,current,,Exponent for WRED calculates the average length of queue. If 'hpnicfIfQoSWredGroupType' is 'queue', the object is ineffective. So, it must use the object, which is 'hpnicfIfQoSWredGroupExponent' of hpnicfIfQoSWredGroupContentTable, to indicate the exponent of each queue of the queue WRED group.
.1.3.6.1.4.1.11.2.14.11.15.2.65.1.6.1.2.1.6,HPN-ICF-IFQOS2-MIB::hpnicfIfQoSWredGroupRowStatus,INTEGER,read-create,,current,active(1):notInService(2):notReady(3):createAndGo(4):createAndWait(5):destroy(6),RowStatus.
.1.3.6.1.4.1.11.2.14.11.15.2.65.1.6.1.3,HPN-ICF-IFQOS2-MIB::hpnicfIfQoSWredGroupContentTable,,not-accessible,,current,,A table of priority WRED information.
.1.3.6.1.4.1.11.2.14.11.15.2.65.1.6.1.3.1,HPN-ICF-IFQOS2-MIB::hpnicfIfQoSWredGroupContentEntry,,not-accessible,hpnicfIfQoSWredGroupIndex:hpnicfIfQoSWredGroupContentIndex:hpnicfIfQoSWredGroupContentSubIndex,current,,Priority WRED information entry.
.1.3.6.1.4.1.11.2.14.11.15.2.65.1.6.1.3.1.1,HPN-ICF-IFQOS2-MIB::hpnicfIfQoSWredGroupContentIndex,Integer32,not-accessible,,current,,The priority of a packet. Different type of packet has different priority. Type of priority Range of priority dot1p 0..7 ippre 0..7 dscp 0..63 atmclp 0..1 frde 0..1 exp 0..7 queue 0..7 ( defined by product ) dropLevel 0..2 
.1.3.6.1.4.1.11.2.14.11.15.2.65.1.6.1.3.1.2,HPN-ICF-IFQOS2-MIB::hpnicfIfQoSWredGroupContentSubIndex,Integer32,not-accessible,,current,,The sub index. Different type of packet has different value. Type of priority Range of value queue 0..2 other types : 0 
.1.3.6.1.4.1.11.2.14.11.15.2.65.1.6.1.3.1.3,HPN-ICF-IFQOS2-MIB::hpnicfIfQoSWredLowLimit,Integer32,read-create,,current,,Discard low limit.
.1.3.6.1.4.1.11.2.14.11.15.2.65.1.6.1.3.1.4,HPN-ICF-IFQOS2-MIB::hpnicfIfQoSWredHighLimit,Integer32,read-create,,current,,Discard high limit.
.1.3.6.1.4.1.11.2.14.11.15.2.65.1.6.1.3.1.5,HPN-ICF-IFQOS2-MIB::hpnicfIfQoSWredDiscardProb,Integer32,read-create,,current,,Discard probability.
.1.3.6.1.4.1.11.2.14.11.15.2.65.1.6.1.3.1.6,HPN-ICF-IFQOS2-MIB::hpnicfIfQoSWredGroupExponent,Integer32,read-create,,current,,Exponent for WRED calculates the average length of queue. Only 'hpnicfIfQoSWredGroupType' is 'queue', the object is effective. This object is designed to indicate the exponent of each queue of the queue WRED group. 
.1.3.6.1.4.1.11.2.14.11.15.2.65.1.6.1.3.1.7,HPN-ICF-IFQOS2-MIB::hpnicfIfQoSWredRowStatus,INTEGER,read-create,,current,active(1):notInService(2):notReady(3):createAndGo(4):createAndWait(5):destroy(6),RowStatus.
.1.3.6.1.4.1.11.2.14.11.15.2.65.1.6.1.4,HPN-ICF-IFQOS2-MIB::hpnicfIfQoSWredGroupApplyIfTable,,not-accessible,,current,,A table of WRED group applied interface information.
.1.3.6.1.4.1.11.2.14.11.15.2.65.1.6.1.4.1,HPN-ICF-IFQOS2-MIB::hpnicfIfQoSWredGroupApplyIfEntry,,not-accessible,ifIndex,current,,WRED group applied interface information.
.1.3.6.1.4.1.11.2.14.11.15.2.65.1.6.1.4.1.1,HPN-ICF-IFQOS2-MIB::hpnicfIfQoSWredGroupApplyIndex,Integer32,read-create,,current,,WRED group index.
.1.3.6.1.4.1.11.2.14.11.15.2.65.1.6.1.4.1.2,HPN-ICF-IFQOS2-MIB::hpnicfIfQoSWredGroupApplyName,OCTET,read-only,,current,,WRED group name.
.1.3.6.1.4.1.11.2.14.11.15.2.65.1.6.1.4.1.3,HPN-ICF-IFQOS2-MIB::hpnicfIfQoSWredGroupIfRowStatus,INTEGER,read-create,,current,active(1):notInService(2):notReady(3):createAndGo(4):createAndWait(5):destroy(6),RowStatus.
.1.3.6.1.4.1.11.2.14.11.15.2.65.1.6.1.5,HPN-ICF-IFQOS2-MIB::hpnicfIfQoSWredApplyIfRunInfoTable,,not-accessible,,current,,A table of WRED statistic information.
.1.3.6.1.4.1.11.2.14.11.15.2.65.1.6.1.5.1,HPN-ICF-IFQOS2-MIB::hpnicfIfQoSWredApplyIfRunInfoEntry,,not-accessible,ifIndex:hpnicfIfQoSWredGroupIndex:hpnicfIfQoSWredGroupContentIndex:hpnicfIfQoSWredGroupContentSubIndex,current,,WRED statistic information.
.1.3.6.1.4.1.11.2.14.11.15.2.65.1.6.1.5.1.1,HPN-ICF-IFQOS2-MIB::hpnicfIfQoSWredPreRandomDropNum,Counter64,read-only,,current,,The number of random drop.
.1.3.6.1.4.1.11.2.14.11.15.2.65.1.6.1.5.1.2,HPN-ICF-IFQOS2-MIB::hpnicfIfQoSWredPreTailDropNum,Counter64,read-only,,current,,The number of tail drop.
.1.3.6.1.4.1.11.2.14.11.15.2.65.1.6.2,HPN-ICF-IFQOS2-MIB::hpnicfIfQoSPortWredGroup,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.2.65.1.6.2.1,HPN-ICF-IFQOS2-MIB::hpnicfIfQoSPortWredWeightConstantTable,,not-accessible,,current,,A table of port WRED configuration information.
.1.3.6.1.4.1.11.2.14.11.15.2.65.1.6.2.1.1,HPN-ICF-IFQOS2-MIB::hpnicfIfQoSPortWredWeightConstantEntry,,not-accessible,ifIndex,current,,Port WRED configuration information entry.
.1.3.6.1.4.1.11.2.14.11.15.2.65.1.6.2.1.1.1,HPN-ICF-IFQOS2-MIB::hpnicfIfQoSPortWredEnable,INTEGER,read-create,,current,true(1):false(2),The object is used to enable or disable WRED function of the port. true: Enable WRED function of a port. false: Disable WRED function of a port. 
.1.3.6.1.4.1.11.2.14.11.15.2.65.1.6.2.1.1.2,HPN-ICF-IFQOS2-MIB::hpnicfIfQoSPortWredWeightConstant,Integer32,read-create,,current,,Weight constant.
.1.3.6.1.4.1.11.2.14.11.15.2.65.1.6.2.1.1.3,HPN-ICF-IFQOS2-MIB::hpnicfIfQoSPortWredWeightConstantRowStatus,INTEGER,read-create,,current,active(1):notInService(2):notReady(3):createAndGo(4):createAndWait(5):destroy(6),RowStatus.
.1.3.6.1.4.1.11.2.14.11.15.2.65.1.6.2.2,HPN-ICF-IFQOS2-MIB::hpnicfIfQoSPortWredPreConfigTable,,not-accessible,,current,,A table of weighted random early detect precedence configuration information.
.1.3.6.1.4.1.11.2.14.11.15.2.65.1.6.2.2.1,HPN-ICF-IFQOS2-MIB::hpnicfIfQoSPortWredPreConfigEntry,,not-accessible,ifIndex:hpnicfIfQoSPortWredPreID,current,,Weighted random early detect precedence configuration information entry.
.1.3.6.1.4.1.11.2.14.11.15.2.65.1.6.2.2.1.1,HPN-ICF-IFQOS2-MIB::hpnicfIfQoSPortWredPreID,Integer32,not-accessible,,current,,IP precedence, from 0 to 7.
.1.3.6.1.4.1.11.2.14.11.15.2.65.1.6.2.2.1.2,HPN-ICF-IFQOS2-MIB::hpnicfIfQoSPortWredPreLowLimit,Integer32,read-create,,current,,Low Limit(number of packets)
.1.3.6.1.4.1.11.2.14.11.15.2.65.1.6.2.2.1.3,HPN-ICF-IFQOS2-MIB::hpnicfIfQoSPortWredPreHighLimit,Integer32,read-create,,current,,High limit(number of packets)
.1.3.6.1.4.1.11.2.14.11.15.2.65.1.6.2.2.1.4,HPN-ICF-IFQOS2-MIB::hpnicfIfQoSPortWredPreDiscardProbability,Integer32,read-create,,current,,Discard probability denominator
.1.3.6.1.4.1.11.2.14.11.15.2.65.1.6.2.2.1.5,HPN-ICF-IFQOS2-MIB::hpnicfIfQoSPortWredPreRowStatus,INTEGER,read-create,,current,active(1):notInService(2):notReady(3):createAndGo(4):createAndWait(5):destroy(6),RowStatus.
.1.3.6.1.4.1.11.2.14.11.15.2.65.1.6.2.3,HPN-ICF-IFQOS2-MIB::hpnicfIfQoSPortWredRunInfoTable,,not-accessible,,current,,A table of WRED statistic information.
.1.3.6.1.4.1.11.2.14.11.15.2.65.1.6.2.3.1,HPN-ICF-IFQOS2-MIB::hpnicfIfQoSPortWredRunInfoEntry,,not-accessible,ifIndex:hpnicfIfQoSPortWredPreID,current,,WRED statistic information entry.
.1.3.6.1.4.1.11.2.14.11.15.2.65.1.6.2.3.1.1,HPN-ICF-IFQOS2-MIB::hpnicfIfQoSWREDTailDropNum,Counter64,read-only,,current,,The number of tail drop.
.1.3.6.1.4.1.11.2.14.11.15.2.65.1.6.2.3.1.2,HPN-ICF-IFQOS2-MIB::hpnicfIfQoSWREDRandomDropNum,Counter64,read-only,,current,,The number of random drop.
.1.3.6.1.4.1.11.2.14.11.15.2.65.1.7,HPN-ICF-IFQOS2-MIB::hpnicfIfQoSPortPriorityObjects,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.2.65.1.7.1,HPN-ICF-IFQOS2-MIB::hpnicfIfQoSPortPriorityConfigGroup,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.2.65.1.7.1.1,HPN-ICF-IFQOS2-MIB::hpnicfIfQoSPortPriorityTable,,not-accessible,,current,,A table of port priority information.
.1.3.6.1.4.1.11.2.14.11.15.2.65.1.7.1.1.1,HPN-ICF-IFQOS2-MIB::hpnicfIfQoSPortPriorityEntry,,not-accessible,ifIndex,current,,Port priority information entry.
.1.3.6.1.4.1.11.2.14.11.15.2.65.1.7.1.1.1.1,HPN-ICF-IFQOS2-MIB::hpnicfIfQoSPortPriorityValue,Integer32,read-write,,current,,The priority of a port.
.1.3.6.1.4.1.11.2.14.11.15.2.65.1.7.1.2,HPN-ICF-IFQOS2-MIB::hpnicfIfQoSPortPirorityTrustTable,,not-accessible,,current,,A table of each port's trusted priority information.
.1.3.6.1.4.1.11.2.14.11.15.2.65.1.7.1.2.1,HPN-ICF-IFQOS2-MIB::hpnicfIfQoSPortPirorityTrustEntry,,not-accessible,ifIndex,current,,Per-port trusted priority information entry.
.1.3.6.1.4.1.11.2.14.11.15.2.65.1.7.1.2.1.1,HPN-ICF-IFQOS2-MIB::hpnicfIfQoSPortPriorityTrustTrustType,INTEGER,read-write,,current,untrust(1):dot1p(2):dscp(3):exp(4):ipPrecedence(5):dot11e(6):auto(7),Trusted priority type of a port.
.1.3.6.1.4.1.11.2.14.11.15.2.65.1.7.1.2.1.2,HPN-ICF-IFQOS2-MIB::hpnicfIfQoSPortPriorityTrustOvercastType,INTEGER,read-write,,current,noOvercast(1):overcastDSCP(2):overcastCOS(3):overcast(4),The overcast type.
.1.3.6.1.4.1.11.2.14.11.15.2.65.1.9,HPN-ICF-IFQOS2-MIB::hpnicfIfQoSMapObjects,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.2.65.1.9.1,HPN-ICF-IFQOS2-MIB::hpnicfIfQoSPriMapConfigGroup,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.2.65.1.9.1.1,HPN-ICF-IFQOS2-MIB::hpnicfIfQoSPriMapGroupNextIndex,Integer32,read-only,,current,,This object contains an appropriate value to be used for hpnicfIfQoSPriMapGroupIndex when creating rows in the hpnicfIfQoSPriMapGroupTable. Begin with 64. 
.1.3.6.1.4.1.11.2.14.11.15.2.65.1.9.1.2,HPN-ICF-IFQOS2-MIB::hpnicfIfQoSPriMapGroupTable,,not-accessible,,current,,A table of map group information.
.1.3.6.1.4.1.11.2.14.11.15.2.65.1.9.1.2.1,HPN-ICF-IFQOS2-MIB::hpnicfIfQoSPriMapGroupEntry,,not-accessible,hpnicfIfQoSPriMapGroupIndex,current,,Map group information entry.
.1.3.6.1.4.1.11.2.14.11.15.2.65.1.9.1.2.1.1,HPN-ICF-IFQOS2-MIB::hpnicfIfQoSPriMapGroupIndex,Integer32,not-accessible,,current,,The index of map, which are defined by system and user. The index of system defined map is 1 to 9. System defined map-name/map-index pairs like this: Map-index Map-name 1 dot1p-dp 2 dot1p-dscp 3 dot1p-lp 4 dscp-dot1p 5 dscp-dp 6 dscp-dscp 7 dscp-lp 8 exp-dp 9 exp-lp 
.1.3.6.1.4.1.11.2.14.11.15.2.65.1.9.1.2.1.2,HPN-ICF-IFQOS2-MIB::hpnicfIfQoSPriMapGroupType,INTEGER,read-create,,current,userdefined(1):dot1p-dp(2):dot1p-dscp(3):dot1p-lp(4):dscp-dot1p(5):dscp-dp(6):dscp-dscp(7):dscp-lp(8):exp-dp(9):exp-lp(10),The type of map group.
.1.3.6.1.4.1.11.2.14.11.15.2.65.1.9.1.2.1.3,HPN-ICF-IFQOS2-MIB::hpnicfIfQoSPriMapGroupName,OCTET,read-create,,current,,The name of map group.
.1.3.6.1.4.1.11.2.14.11.15.2.65.1.9.1.2.1.4,HPN-ICF-IFQOS2-MIB::hpnicfIfQoSPriMapGroupRowStatus,INTEGER,read-create,,current,active(1):notInService(2):notReady(3):createAndGo(4):createAndWait(5):destroy(6),RowStatus.
.1.3.6.1.4.1.11.2.14.11.15.2.65.1.9.1.3,HPN-ICF-IFQOS2-MIB::hpnicfIfQoSPriMapContentTable,,not-accessible,,current,,A table of priority map configuration information.
.1.3.6.1.4.1.11.2.14.11.15.2.65.1.9.1.3.1,HPN-ICF-IFQOS2-MIB::hpnicfIfQoSPriMapContentEntry,,not-accessible,hpnicfIfQoSPriMapGroupIndex:hpnicfIfQoSPriMapGroupImportValue,current,,Priority map configuration information entry.
.1.3.6.1.4.1.11.2.14.11.15.2.65.1.9.1.3.1.1,HPN-ICF-IFQOS2-MIB::hpnicfIfQoSPriMapGroupImportValue,Integer32,not-accessible,,current,,Priority map table import value list. Different map has different hpnicfIfQoSPriMapConfigImportValue. Map-name Range of hpnicfIfQoSPriMapConfigImportValue dot1p-dp (0..7) dot1p-dscp (0..7) dot1p-lp (0..7) dscp-dot1p (0..63) dscp-dp (0..63) dscp-dscp (0..63) dscp-lp(7) (0..63) exp-dp(8) (0..7) exp-lp (0..7) 
.1.3.6.1.4.1.11.2.14.11.15.2.65.1.9.1.3.1.2,HPN-ICF-IFQOS2-MIB::hpnicfIfQoSPriMapGroupExportValue,Integer32,read-create,,current,,Priority map table output. Different map has different hpnicfIfQoSPriMapGroupExportValue. dot1p-dp: 0..7 dot1p-dscp: 0..63 dot1p-lp: 0..7 dscp-dot1p: 0..7 dscp-dp: 0..7 dscp-dscp: 0..63 dscp-lp: 0..7 exp-dp: 0..7 exp-lp: 0..7 
.1.3.6.1.4.1.11.2.14.11.15.2.65.1.9.1.3.1.3,HPN-ICF-IFQOS2-MIB::hpnicfIfQoSPriMapContentRowStatus,INTEGER,read-create,,current,active(1):notInService(2):notReady(3):createAndGo(4):createAndWait(5):destroy(6),RowStatus.
.1.3.6.1.4.1.11.2.14.11.15.2.65.1.9.1.4,HPN-ICF-IFQOS2-MIB::hpnicfIfQoSPrePriMapTable,,not-accessible,,current,,Pre-defined priority mapping table information.
.1.3.6.1.4.1.11.2.14.11.15.2.65.1.9.1.4.1,HPN-ICF-IFQOS2-MIB::hpnicfIfQoSPrePriMapEntry,,not-accessible,hpnicfIfQoSPrePriMapTableType:hpnicfIfQoSPrePriMapTableColor:hpnicfIfQoSPrePriMapTableDirection:hpnicfIfQoSPrePriMapTableImportValue,current,,Pre-defined priority mapping table entry.
.1.3.6.1.4.1.11.2.14.11.15.2.65.1.9.1.4.1.1,HPN-ICF-IFQOS2-MIB::hpnicfIfQoSPrePriMapTableType,INTEGER,not-accessible,,current,dot1pToLp(1):dot1pToDp(2):expToLp(3):dscpToLp(4):expToDp(5):dscpToDp(6):dscpToDot1p(7):dot1pToDscp(8):dscpToDscp(9):dscpToExp(10):expToDscp(11):expToDot1p(12):expToExp(13):lpToDot1p(14):dot1pToRpr(15):dscpToRpr(16):expToRpr(17):ippreToRpr(18):upToDot1p(19):upToDscp(20):upToExp(21):upToDp(22):upToLp(23):upToRpr(24):upToFc(25):lpTodscp(26):dot11eToLp(27):lpToDot11e(28):lpToLp(29):dot1pToExp(30):lpToExp(31):lpToDp(32):upToUp(33):dot1pToDot1p(34),The type of pre-defined priority mapping table.
.1.3.6.1.4.1.11.2.14.11.15.2.65.1.9.1.4.1.2,HPN-ICF-IFQOS2-MIB::hpnicfIfQoSPrePriMapTableColor,INTEGER,not-accessible,,current,noColor(1):green(2):yellow(3):red(4),The color of pre-defined priority mapping table.
.1.3.6.1.4.1.11.2.14.11.15.2.65.1.9.1.4.1.3,HPN-ICF-IFQOS2-MIB::hpnicfIfQoSPrePriMapTableDirection,INTEGER,not-accessible,,current,noDirection(1):inbound(2):outbound(3),The direction of pre-defined priority mapping table.
.1.3.6.1.4.1.11.2.14.11.15.2.65.1.9.1.4.1.4,HPN-ICF-IFQOS2-MIB::hpnicfIfQoSPrePriMapTableImportValue,Integer32,not-accessible,,current,,Input value of priority mapping table. Different priority has different hpnicfIfQoSPrePriMapTableImportValue. Priority-type Range of hpnicfIfQoSPrePriMapTableImportValue dot1p (0..7) dscp (0..63) lp (0..7) exp (0..7) ipPrecedence (0..7) up (0..7) dot11e (0..7) 
.1.3.6.1.4.1.11.2.14.11.15.2.65.1.9.1.4.1.5,HPN-ICF-IFQOS2-MIB::hpnicfIfQoSPrePriMapTableExportValue,Integer32,read-write,,current,,Output value of priority mapping table. Different priority has different hpnicfIfQoSPrePriMapTableExportValue. Priority-type Range of hpnicfIfQoSPrePriMapTableExportValue dot1p (0..7) dscp (0..63) lp (0..7) exp (0..7) ipPrecedence (0..7) up (0..7) dp (0..2) fc (0..7) rpr (0..2) 
.1.3.6.1.4.1.11.2.14.11.15.2.65.1.10,HPN-ICF-IFQOS2-MIB::hpnicfIfQoSL3PlusObjects,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.2.65.1.10.1,HPN-ICF-IFQOS2-MIB::hpnicfIfQoSPortBindingGroup,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.2.65.1.10.1.1,HPN-ICF-IFQOS2-MIB::hpnicfIfQoSPortBindingTable,,not-accessible,,current,,A table of EACL sub-interface binding information for L3+ board .
.1.3.6.1.4.1.11.2.14.11.15.2.65.1.10.1.1.1,HPN-ICF-IFQOS2-MIB::hpnicfIfQoSPortBindingEntry,,not-accessible,ifIndex,current,,Binding information entry.
.1.3.6.1.4.1.11.2.14.11.15.2.65.1.10.1.1.1.1,HPN-ICF-IFQOS2-MIB::hpnicfIfQoSBindingIf,Integer32,read-create,,current,,The binding interface.
.1.3.6.1.4.1.11.2.14.11.15.2.65.1.10.1.1.1.2,HPN-ICF-IFQOS2-MIB::hpnicfIfQoSBindingRowStatus,INTEGER,read-create,,current,active(1):notInService(2):notReady(3):createAndGo(4):createAndWait(5):destroy(6),RowStatus
.1.3.6.1.4.1.11.2.14.11.15.2.65.1.11,HPN-ICF-IFQOS2-MIB::hpnicfQoSTraStaObjects,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.2.65.1.11.1,HPN-ICF-IFQOS2-MIB::hpnicfQoSTraStaConfigGroup,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.2.65.1.11.1.1,HPN-ICF-IFQOS2-MIB::hpnicfQoSIfTraStaConfigInfoTable,,not-accessible,,current,,A table of traffic statistics configuration information.
.1.3.6.1.4.1.11.2.14.11.15.2.65.1.11.1.1.1,HPN-ICF-IFQOS2-MIB::hpnicfQoSIfTraStaConfigInfoEntry,,not-accessible,ifIndex:hpnicfQoSIfTraStaConfigDirection,current,,An entry of interface traffic statistics configuration information.
.1.3.6.1.4.1.11.2.14.11.15.2.65.1.11.1.1.1.1,HPN-ICF-IFQOS2-MIB::hpnicfQoSIfTraStaConfigDirection,INTEGER,not-accessible,,current,inbound(1):outbound(2),The direction of the traffic statistics.
.1.3.6.1.4.1.11.2.14.11.15.2.65.1.11.1.1.1.2,HPN-ICF-IFQOS2-MIB::hpnicfQoSIfTraStaConfigQueue,OCTET,read-create,,current,,The bitmap of Queue ID. The octet specifies queues 0 through 7. If a bit has a value of '1', the corresponding queue is configured in the set of Queues; if a bit has a value of '0', the corresponding queue is not configured.
.1.3.6.1.4.1.11.2.14.11.15.2.65.1.11.1.1.1.3,HPN-ICF-IFQOS2-MIB::hpnicfQoSIfTraStaConfigDot1p,OCTET,read-create,,current,,The bitmap of Dot1p value. The octet specifies Dot1p values 0 through 7. If a bit has a value of '1', the corresponding Dot1p value is configured in the set of Dot1p values; if a bit has a value of '0', the corresponding Dot1p value is not configured.
.1.3.6.1.4.1.11.2.14.11.15.2.65.1.11.1.1.1.4,HPN-ICF-IFQOS2-MIB::hpnicfQoSIfTraStaConfigDscp,OCTET,read-create,,current,,The bitmap of Dscp value. Each octet within this value specifies a set of eight Dscp values, with the first octet specifying Dscp values 0 through 7, the second octet specifying Dscp values 8 through 15, etc. If a bit has a value of '1', the corresponding Dscp value is configured in the set of Dscp values; if a bit has a value of '0', the corresponding Dscp value is not configured.
.1.3.6.1.4.1.11.2.14.11.15.2.65.1.11.1.1.1.5,HPN-ICF-IFQOS2-MIB::hpnicfQoSIfTraStaConfigVlan,OCTET,read-create,,current,,The bitmap of VLAN ID. Each octet within this value specifies a set of eight VLANs, with the first octet specifying VLANs 0 through 7, the second octet specifying VLANs 8 through 15, etc. If a bit has a value of '1', the corresponding VLAN is configured in the set of VLANs; if a bit has a value of '0', the corresponding VLAN is not configured.
.1.3.6.1.4.1.11.2.14.11.15.2.65.1.11.1.1.1.6,HPN-ICF-IFQOS2-MIB::hpnicfQoSIfTraStaConfigStatus,INTEGER,read-create,,current,active(1):notInService(2):notReady(3):createAndGo(4):createAndWait(5):destroy(6),The row status of this table entry.
.1.3.6.1.4.1.11.2.14.11.15.2.65.1.11.2,HPN-ICF-IFQOS2-MIB::hpnicfQoSTraStaRunGroup,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.2.65.1.11.2.1,HPN-ICF-IFQOS2-MIB::hpnicfQoSIfTraStaRunInfoTable,,not-accessible,,current,,A table of traffic statistics running information.
.1.3.6.1.4.1.11.2.14.11.15.2.65.1.11.2.1.1,HPN-ICF-IFQOS2-MIB::hpnicfQoSIfTraStaRunInfoEntry,,not-accessible,ifIndex:hpnicfQoSIfTraStaRunObjectType:hpnicfQoSIfTraStaRunObjectValue:hpnicfQoSIfTraStaRunDirection,current,,An entry of interface traffic statistics running information.
.1.3.6.1.4.1.11.2.14.11.15.2.65.1.11.2.1.1.1,HPN-ICF-IFQOS2-MIB::hpnicfQoSIfTraStaRunObjectType,INTEGER,not-accessible,,current,queue(1):dot1p(2):dscp(3):vlanID(4),Type of statistics object.
.1.3.6.1.4.1.11.2.14.11.15.2.65.1.11.2.1.1.2,HPN-ICF-IFQOS2-MIB::hpnicfQoSIfTraStaRunObjectValue,Integer32,not-accessible,,current,,Value range for the object type: for Queue: 0~7 for Dot1p: 0~7 for Dscp: 0~63 for VlanID: 1~4094 
.1.3.6.1.4.1.11.2.14.11.15.2.65.1.11.2.1.1.3,HPN-ICF-IFQOS2-MIB::hpnicfQoSIfTraStaRunDirection,INTEGER,not-accessible,,current,inbound(1):outbound(2),The direction of the traffic statistics.
.1.3.6.1.4.1.11.2.14.11.15.2.65.1.11.2.1.1.4,HPN-ICF-IFQOS2-MIB::hpnicfQoSIfTraStaRunPassPackets,Counter64,read-only,,current,,Number of passed packets.
.1.3.6.1.4.1.11.2.14.11.15.2.65.1.11.2.1.1.5,HPN-ICF-IFQOS2-MIB::hpnicfQoSIfTraStaRunDropPackets,Counter64,read-only,,current,,Number of dropped packets.
.1.3.6.1.4.1.11.2.14.11.15.2.65.1.11.2.1.1.6,HPN-ICF-IFQOS2-MIB::hpnicfQoSIfTraStaRunPassBytes,Counter64,read-only,,current,,Number of passed bytes.
.1.3.6.1.4.1.11.2.14.11.15.2.65.1.11.2.1.1.7,HPN-ICF-IFQOS2-MIB::hpnicfQoSIfTraStaRunDropBytes,Counter64,read-only,,current,,Number of dropped bytes.
.1.3.6.1.4.1.11.2.14.11.15.2.65.1.11.2.1.1.8,HPN-ICF-IFQOS2-MIB::hpnicfQoSIfTraStaRunPassPPS,Counter64,read-only,,current,,PPS (packets per second) of passed packets.
.1.3.6.1.4.1.11.2.14.11.15.2.65.1.11.2.1.1.9,HPN-ICF-IFQOS2-MIB::hpnicfQoSIfTraStaRunPassBPS,Counter64,read-only,,current,,BPS (bytes per second) of passed packets.
.1.3.6.1.4.1.11.2.14.11.15.2.65.1.12,HPN-ICF-IFQOS2-MIB::hpnicfQoSGlobalPriorityObject,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.2.65.1.12.1,HPN-ICF-IFQOS2-MIB::hpnicfQoSRemarkTcpPortPriTable,,not-accessible,,current,,A table of remarking TCP port priority information. The priority field of all packets with the specified TCP port will be remarked to the configured value. 
.1.3.6.1.4.1.11.2.14.11.15.2.65.1.12.1.1,HPN-ICF-IFQOS2-MIB::hpnicfQoSRemarkTcpPortPriEntry,,not-accessible,hpnicfQoSRemarkTcpPortStart,current,,Remarking TCP port priority information entry.
.1.3.6.1.4.1.11.2.14.11.15.2.65.1.12.1.1.1,HPN-ICF-IFQOS2-MIB::hpnicfQoSRemarkTcpPortStart,Integer32,not-accessible,,current,,Start value of TCP port range.
.1.3.6.1.4.1.11.2.14.11.15.2.65.1.12.1.1.2,HPN-ICF-IFQOS2-MIB::hpnicfQoSRemarkTcpPortEnd,Integer32,read-create,,current,,End value of TCP port range. It can not be less than start value. 
.1.3.6.1.4.1.11.2.14.11.15.2.65.1.12.1.1.3,HPN-ICF-IFQOS2-MIB::hpnicfQoSRemarkTcpPortType,INTEGER,read-create,,current,ipAll(1):ipv4(2):ipv6(3),IPv4 packet, IPv6 packet, or all IP packet.
.1.3.6.1.4.1.11.2.14.11.15.2.65.1.12.1.1.4,HPN-ICF-IFQOS2-MIB::hpnicfQoSRemarkTcpPortDot1p,Unsigned32,read-create,,current,,Dot1p value.
.1.3.6.1.4.1.11.2.14.11.15.2.65.1.12.1.1.5,HPN-ICF-IFQOS2-MIB::hpnicfQoSRemarkTcpPortDscp,Unsigned32,read-create,,current,,DSCP value.
.1.3.6.1.4.1.11.2.14.11.15.2.65.1.12.1.1.6,HPN-ICF-IFQOS2-MIB::hpnicfQoSRemarkTcpPortRowStatus,INTEGER,read-create,,current,active(1):notInService(2):notReady(3):createAndGo(4):createAndWait(5):destroy(6),Row status.
.1.3.6.1.4.1.11.2.14.11.15.2.65.1.12.2,HPN-ICF-IFQOS2-MIB::hpnicfQoSRemarkUdpPortPriTable,,not-accessible,,current,,A table of remarking UDP port priority information. The priority field of all packets with the specified UDP port will be remarked to the configured value. 
.1.3.6.1.4.1.11.2.14.11.15.2.65.1.12.2.1,HPN-ICF-IFQOS2-MIB::hpnicfQoSRemarkUdpPortPriEntry,,not-accessible,hpnicfQoSRemarkUdpPortStart,current,,Remarking UDP port priority information entry.
.1.3.6.1.4.1.11.2.14.11.15.2.65.1.12.2.1.1,HPN-ICF-IFQOS2-MIB::hpnicfQoSRemarkUdpPortStart,Integer32,not-accessible,,current,,Start value of UDP port range.
.1.3.6.1.4.1.11.2.14.11.15.2.65.1.12.2.1.2,HPN-ICF-IFQOS2-MIB::hpnicfQoSRemarkUdpPortEnd,Integer32,read-create,,current,,End value of UDP port range. It can not be less than start value. 
.1.3.6.1.4.1.11.2.14.11.15.2.65.1.12.2.1.3,HPN-ICF-IFQOS2-MIB::hpnicfQoSRemarkUdpPortType,INTEGER,read-create,,current,ipAll(1):ipv4(2):ipv6(3),IPv4 packet, IPv6 packet, or all IP packet.
.1.3.6.1.4.1.11.2.14.11.15.2.65.1.12.2.1.4,HPN-ICF-IFQOS2-MIB::hpnicfQoSRemarkUdpPortDot1p,Unsigned32,read-create,,current,,Dot1p value.
.1.3.6.1.4.1.11.2.14.11.15.2.65.1.12.2.1.5,HPN-ICF-IFQOS2-MIB::hpnicfQoSRemarkUdpPortDscp,Unsigned32,read-create,,current,,DSCP value.
.1.3.6.1.4.1.11.2.14.11.15.2.65.1.12.2.1.6,HPN-ICF-IFQOS2-MIB::hpnicfQoSRemarkUdpPortRowStatus,INTEGER,read-create,,current,active(1):notInService(2):notReady(3):createAndGo(4):createAndWait(5):destroy(6),Row status.
.1.3.6.1.4.1.11.2.14.11.15.2.65.1.12.3,HPN-ICF-IFQOS2-MIB::hpnicfQoSRemarkIPv4AddrPriTable,,not-accessible,,current,,A table of remarking IPv4 address priority information.
.1.3.6.1.4.1.11.2.14.11.15.2.65.1.12.3.1,HPN-ICF-IFQOS2-MIB::hpnicfQoSRemarkIPv4AddrPriEntry,,not-accessible,hpnicfQoSRemarkIPv4AddrValue,current,,Remarking IPv4 address priority information entry. The priority field of all IPv4 packets with the specified IP address will be remarked to the configured value. 
.1.3.6.1.4.1.11.2.14.11.15.2.65.1.12.3.1.1,HPN-ICF-IFQOS2-MIB::hpnicfQoSRemarkIPv4AddrValue,IpAddress,not-accessible,,current,,IPv4 address.
.1.3.6.1.4.1.11.2.14.11.15.2.65.1.12.3.1.2,HPN-ICF-IFQOS2-MIB::hpnicfQoSRemarkIPv4AddrMask,IpAddress,read-create,,current,,Mask of IPv4 address.
.1.3.6.1.4.1.11.2.14.11.15.2.65.1.12.3.1.3,HPN-ICF-IFQOS2-MIB::hpnicfQoSRemarkIPv4AddrMaskLength,Unsigned32,read-create,,current,,Mask length of IPv4 address.
.1.3.6.1.4.1.11.2.14.11.15.2.65.1.12.3.1.4,HPN-ICF-IFQOS2-MIB::hpnicfQoSRemarkIPv4AddrDot1p,Unsigned32,read-create,,current,,Dot1p value.
.1.3.6.1.4.1.11.2.14.11.15.2.65.1.12.3.1.5,HPN-ICF-IFQOS2-MIB::hpnicfQoSRemarkIPv4AddrDscp,Unsigned32,read-create,,current,,DSCP value.
.1.3.6.1.4.1.11.2.14.11.15.2.65.1.12.3.1.6,HPN-ICF-IFQOS2-MIB::hpnicfQoSRemarkIPv4AddrRowStatus,INTEGER,read-create,,current,active(1):notInService(2):notReady(3):createAndGo(4):createAndWait(5):destroy(6),Row status.
.1.3.6.1.4.1.11.2.14.11.15.2.65.1.12.4,HPN-ICF-IFQOS2-MIB::hpnicfQoSRemarkIPv6AddrPriTable,,not-accessible,,current,,A table of remarking IPv6 address priority information. The priority field of all IPv6 packets with the specified IP address will be remarked to the configured value. 
.1.3.6.1.4.1.11.2.14.11.15.2.65.1.12.4.1,HPN-ICF-IFQOS2-MIB::hpnicfQoSRemarkIPv6AddrPriEntry,,not-accessible,hpnicfQoSRemarkIPv6AddrValue,current,,Remarking IPv6 address priority information entry.
.1.3.6.1.4.1.11.2.14.11.15.2.65.1.12.4.1.1,HPN-ICF-IFQOS2-MIB::hpnicfQoSRemarkIPv6AddrValue,OCTET,not-accessible,,current,,IPv6 address.
.1.3.6.1.4.1.11.2.14.11.15.2.65.1.12.4.1.2,HPN-ICF-IFQOS2-MIB::hpnicfQoSRemarkIPv6AddrPrefixLength,Unsigned32,read-create,,current,,Prefix length of IPv6 address.
.1.3.6.1.4.1.11.2.14.11.15.2.65.1.12.4.1.3,HPN-ICF-IFQOS2-MIB::hpnicfQoSRemarkIPv6AddrDot1p,Unsigned32,read-create,,current,,Dot1p value.
.1.3.6.1.4.1.11.2.14.11.15.2.65.1.12.4.1.4,HPN-ICF-IFQOS2-MIB::hpnicfQoSRemarkIPv6AddrDscp,Unsigned32,read-create,,current,,DSCP value.
.1.3.6.1.4.1.11.2.14.11.15.2.65.1.12.4.1.5,HPN-ICF-IFQOS2-MIB::hpnicfQoSRemarkIPv6AddrRowStatus,INTEGER,read-create,,current,active(1):notInService(2):notReady(3):createAndGo(4):createAndWait(5):destroy(6),Row status.
.1.3.6.1.4.1.11.2.14.11.15.2.65.1.12.5,HPN-ICF-IFQOS2-MIB::hpnicfQoSRemarkProtocolPriTable,,not-accessible,,current,,A table of remarking layer 3 protocol priority information. The 802.1p priority field of all packets of the specified protocol will be remarked to the configured value. 
.1.3.6.1.4.1.11.2.14.11.15.2.65.1.12.5.1,HPN-ICF-IFQOS2-MIB::hpnicfQoSRemarkProtocolPriEntry,,not-accessible,hpnicfQoSRemarkProtocolValue,current,,Remarking layer 3 protocol priority information entry.
.1.3.6.1.4.1.11.2.14.11.15.2.65.1.12.5.1.1,HPN-ICF-IFQOS2-MIB::hpnicfQoSRemarkProtocolValue,INTEGER,not-accessible,,current,ip(1):ipx(2):arp(3):appletalk(4):sna(5):netbeui(6),Layer 3 protocol type.
.1.3.6.1.4.1.11.2.14.11.15.2.65.1.12.5.1.2,HPN-ICF-IFQOS2-MIB::hpnicfQoSRemarkProtocolDot1p,Unsigned32,read-create,,current,,Dot1p value.
.1.3.6.1.4.1.11.2.14.11.15.2.65.1.12.5.1.3,HPN-ICF-IFQOS2-MIB::hpnicfQoSRemarkProtocolRowStatus,INTEGER,read-create,,current,active(1):notInService(2):notReady(3):createAndGo(4):createAndWait(5):destroy(6),Row status.
.1.3.6.1.4.1.11.2.14.11.15.2.65.1.12.6,HPN-ICF-IFQOS2-MIB::hpnicfQoSRemarkVlanPriTable,,not-accessible,,current,,A table of remarking VLAN priority information. The priority field of all packets of the specified VLAN will be remarked to the configured value. 
.1.3.6.1.4.1.11.2.14.11.15.2.65.1.12.6.1,HPN-ICF-IFQOS2-MIB::hpnicfQoSRemarkVlanPriEntry,,not-accessible,hpnicfQoSRemarkVlanStart,current,,Remarking VLAN priority information entry.
.1.3.6.1.4.1.11.2.14.11.15.2.65.1.12.6.1.1,HPN-ICF-IFQOS2-MIB::hpnicfQoSRemarkVlanStart,Integer32,not-accessible,,current,,Start VLAN ID.
.1.3.6.1.4.1.11.2.14.11.15.2.65.1.12.6.1.2,HPN-ICF-IFQOS2-MIB::hpnicfQoSRemarkVlanEnd,Integer32,read-create,,current,,End VLAN ID. It can not be less than start value.
.1.3.6.1.4.1.11.2.14.11.15.2.65.1.12.6.1.3,HPN-ICF-IFQOS2-MIB::hpnicfQoSRemarkVlanDot1p,Unsigned32,read-create,,current,,Dot1p value.
.1.3.6.1.4.1.11.2.14.11.15.2.65.1.12.6.1.4,HPN-ICF-IFQOS2-MIB::hpnicfQoSRemarkVlanDscp,Unsigned32,read-create,,current,,DSCP value.
.1.3.6.1.4.1.11.2.14.11.15.2.65.1.12.6.1.5,HPN-ICF-IFQOS2-MIB::hpnicfQoSRemarkVlanRowStatus,INTEGER,read-create,,current,active(1):notInService(2):notReady(3):createAndGo(4):createAndWait(5):destroy(6),Row status.
.1.3.6.1.4.1.11.2.14.11.15.2.65.1.12.7,HPN-ICF-IFQOS2-MIB::hpnicfQoSTypeOfServiceObjects,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.2.65.1.12.7.1,HPN-ICF-IFQOS2-MIB::hpnicfQoSTypeOfServiceMode,INTEGER,read-write,,current,disabled(1):ipPrecedence(2):dscp(3),Global type of service. The type of service is disabled by default. When in ip-precedence mode, device uses ip-precedence value to determine the 802.1p priority of the packet and its outbound queue. When in DSCP mode, device uses DSCP value to determine the 802.1p priority of the packet and its outbound queue. 
.1.3.6.1.4.1.11.2.14.11.15.2.65.2,HPN-ICF-OID-MIB::hpnicfCBQos2,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.2.65.2.1,HPN-ICF-CBQOS2-MIB::hpnicfCBQoSObjects,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.2.65.2.1.1,HPN-ICF-CBQOS2-MIB::hpnicfCBQoSClassifierObjects,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.2.65.2.1.1.1,HPN-ICF-CBQOS2-MIB::hpnicfCBQoSClassifierIndexNext,Integer32,read-only,,current,,This object contains an appropriate value to be used for hpnicfCBQoSClassifierIndex when creating rows in the hpnicfCBQoSClassifierCfgInfoTable. 
.1.3.6.1.4.1.11.2.14.11.15.2.65.2.1.1.2,HPN-ICF-CBQOS2-MIB::hpnicfCBQoSClassifierCfgInfoTable,,not-accessible,,current,,A table of Traffic Classifier configuration information.
.1.3.6.1.4.1.11.2.14.11.15.2.65.2.1.1.2.1,HPN-ICF-CBQOS2-MIB::hpnicfCBQoSClassifierCfgInfoEntry,,not-accessible,hpnicfCBQoSClassifierIndex,current,,Traffic Classifier Configuration Information Entry.
.1.3.6.1.4.1.11.2.14.11.15.2.65.2.1.1.2.1.1,HPN-ICF-CBQOS2-MIB::hpnicfCBQoSClassifierIndex,Integer32,not-accessible,,current,,Index of Traffic Classifier. Begin with 0.
.1.3.6.1.4.1.11.2.14.11.15.2.65.2.1.1.2.1.2,HPN-ICF-CBQOS2-MIB::hpnicfCBQoSClassifierName,OCTET,read-create,,current,,Name of Traffic Classifier.
.1.3.6.1.4.1.11.2.14.11.15.2.65.2.1.1.2.1.3,HPN-ICF-CBQOS2-MIB::hpnicfCBQoSClassifierRuleCount,Integer32,read-only,,current,,The counter of match rules of Traffic classifier.
.1.3.6.1.4.1.11.2.14.11.15.2.65.2.1.1.2.1.4,HPN-ICF-CBQOS2-MIB::hpnicfCBQoSClassifierOperator,INTEGER,read-create,,current,and(1):or(2),Operator of the match rules of traffic classifier. Software QoS supports and, or. Hardware QoS supports and. 
.1.3.6.1.4.1.11.2.14.11.15.2.65.2.1.1.2.1.5,HPN-ICF-CBQOS2-MIB::hpnicfCBQoSClassifierLayer,INTEGER,read-create,,current,unavailable(1):l2(2):l3(3):both(4),Configuration layer of traffic classifier. Only hardware QoS support it. 1(unavailable) is returned only when getting value from software QoS. 1(unavailable) can't be set. 
.1.3.6.1.4.1.11.2.14.11.15.2.65.2.1.1.2.1.6,HPN-ICF-CBQOS2-MIB::hpnicfCBQoSClassifierType,INTEGER,read-only,,current,systemDefined(1):userDefined(2),The type of classifier.
.1.3.6.1.4.1.11.2.14.11.15.2.65.2.1.1.2.1.7,HPN-ICF-CBQOS2-MIB::hpnicfCBQosClassifierMatchRuleNextIndex,Integer32,read-only,,current,,This object contains an appropriate value to be used for hpnicfCBQoSMatchRuleIndex when creating rows in the hpnicfCBQoSMatchRuleCfgInfoTable. 
.1.3.6.1.4.1.11.2.14.11.15.2.65.2.1.1.2.1.8,HPN-ICF-CBQOS2-MIB::hpnicfCBQoSClassifierRowStatus,INTEGER,read-create,,current,active(1):notInService(2):notReady(3):createAndGo(4):createAndWait(5):destroy(6),RowStatus.
.1.3.6.1.4.1.11.2.14.11.15.2.65.2.1.1.3,HPN-ICF-CBQOS2-MIB::hpnicfCBQoSMatchRuleCfgInfoTable,,not-accessible,,current,,A table of Match Rule configuration information.
.1.3.6.1.4.1.11.2.14.11.15.2.65.2.1.1.3.1,HPN-ICF-CBQOS2-MIB::hpnicfCBQoSMatchRuleCfgInfoEntry,,not-accessible,hpnicfCBQoSClassifierIndex:hpnicfCBQoSMatchRuleIndex,current,,Match Rule Configuration Information Entry.
.1.3.6.1.4.1.11.2.14.11.15.2.65.2.1.1.3.1.1,HPN-ICF-CBQOS2-MIB::hpnicfCBQoSMatchRuleIndex,Integer32,not-accessible,,current,,Index of Match Rule.
.1.3.6.1.4.1.11.2.14.11.15.2.65.2.1.1.3.1.2,HPN-ICF-CBQOS2-MIB::hpnicfCBQoSMatchRuleIfNot,INTEGER,read-create,,current,match(1):matchNot(2),Whether the if-match rule is a match or matchNot statement. Software QoS supports match, matchNot. Hardware QoS supports match. 
.1.3.6.1.4.1.11.2.14.11.15.2.65.2.1.1.3.1.3,HPN-ICF-CBQOS2-MIB::hpnicfCBQoSMatchRuleType,INTEGER,read-create,,current,matchRuleAny(1):matchRuleIpv4Acl(2):matchRuleIPv6Acl(3):matchRuleIPv4Protocol(4):matchRuleIPv6Protocol(5):matchRuleIPXProtocol(6):matchRuleDscp(7):matchRuleIpPre(8):matchRuleVlan8021p(9):matchRuleMplsExp(10):matchRuleAtmClp(11):matchRuleFrDe(12):matchRuleSourceMac(13):matchRuleDestinationMac(14):matchRuleQosLocalID(15):matchRuleClassifier(16):matchRuleInboundInterface(17):matchRuleRtpPort(18):matchRuleSourceIp(19):matchRuleVlanID(20):matchRuleTopMostVlanID(21):matchRuleLocalPrecedence(22):matchRuleDropPriority(23):matchRuleBittorrent(24):matchRuleServiceDot1p(25):matchRuleMplsLabel(26):matchRuleSecondMplsLabel(27):matchRuleSecondMplsExp(28):matchRulePacketLength(29):matchRuleArpProtocol(30):matchRuleForwardingLayer(31),Type of Match Rule.
.1.3.6.1.4.1.11.2.14.11.15.2.65.2.1.1.3.1.4,HPN-ICF-CBQOS2-MIB::hpnicfCBQoSMatchRuleStringValue,OCTET,read-create,,current,,Value of Match Rule. IPv4 ACL: SIZE (1..63) ACL name IPv6 ACL: SIZE (1..63) IPv6 ACL name SourceMAC: SIZE (12) HHHHHHHHHHHH for example: 010102020303 means the match rule is 'if-match source-mac 0101-0202-0303' DestinationMAC: SIZE (12) HHHHHHHHHHHH for example: 010102020303 means the match rule is 'if-match destination-mac 0101-0202-0303' Classifier: SIZE (1..31) classifier name InboundInterface: SIZE (1..47) interface description TopMostVlanID, VlanID: SIZE(1..109), up to 10 values can be input; for example: 1##5#11#111##114#1111 means the match rule is 'if-match vlanid 1 to 5 11 111 to 114 1111' SourceIp: SIZE (12) HHHHHHHHHHHH for example: 010102020303 means the match rule is 'if-match source-ip mac-address 0101-0202-0303' MplsLabel: SIZE (1..63), up to 8 values can be input; for example: 1#11#111#1111 means the match rule is 'if-match mpls-label 1 11 111 1111'; 1##1111 means the match rule is 'if-match mpls-label 1 to 1111'; SecondMplsLabel: SIZE (1..63), up to 8 values can be input; for example: 1#11#111#1111 means the match rule is 'if-match mpls-label 1 11 111 1111'; 1##1111 means the match rule is 'if-match mpls-label 1 to 1111'; other types: Set is not permitted. zero-length string will be returned when getting. 
.1.3.6.1.4.1.11.2.14.11.15.2.65.2.1.1.3.1.5,HPN-ICF-CBQOS2-MIB::hpnicfCBQoSMatchRuleIntValue1,Unsigned32,read-create,,current,,Value of Match Rule. IPv4 ACL: 2000~5999 IPv6 ACL: 2000~3999; 10000~42767 Software QoS: 2000~3999 Hardware Qos: 10000~42767 RtpPort: start-port: 2000~65535 IpPrec: value: 0~7, up to 8 values can be input. The bit set to 1 of the last 8 bits of hpnicfCBQoSMatchRuleIntValue1 is used to indicate the value 0~7. for example: 0x53(Binary format is 01010011) means the match rule is 'if-match ip-prec 0 1 4 6' Dscp: value:0~63, up to 8 values can be input. The bit set to 1 of hpnicfCBQoSMatchRuleIntValue1 is used to indicate the value 32~63. The bit set to 1 of hpnicfCBQoSMatchRuleIntValue2 is used to indicate the value 0~31. for example: 0x80000003 means the match rule is 'if-match dscp 32 33 63' Vlan8021p: value:0~7, up to 8 values can be input. The bit set to 1 of the last 8 bits of hpnicfCBQoSMatchRuleIntValue1 is used to indicate the value 0~7. for example: 0x53(Binary format is 01010011) means the match rule is 'if-match customer-dot1p 0 1 4 6' MplsExp: value:0~7, up to 8 values can be input. The bit set to 1 of the last 8 bits of hpnicfCBQoSMatchRuleIntValue1 is used to indicate the 8 value 0~7. for example: 0x53(Binary format is 01010011) means the match rule is 'if-match mpls 0 1 4 6' SourceIp: 1~4095 QosLocalID: 1~4095 AtmClp: 0~1 FrDe: 0~1 LocalPrecedence: 0~7, up to 8 values can be input. The bit set to 1 of the last 8 bits of hpnicfCBQoSMatchRuleIntValue1 is used to indicate the value 0~7. for example: 0x53(Binary format is 01010011) means the match rule is 'if-match localprecedence 0 1 4 6' DropPriority: 0~2, up to 3 values can be input. The bit set to 1 of the last 3 bits of hpnicfCBQoSMatchRuleIntValue1 is used to indicate the value 0~2. ServiceDot1p: 0~7, up to 8 values can be input. The bit set to 1 of the last 8 bits of hpnicfCBQoSMatchRuleIntValue1 is used to indicate the value 0~7. for example: 0x53(Binary format is 01010011) means the match rule is 'if-match service-dot1p 0 1 4 6' SecondMplsExp: value:0~7, up to 8 values can be input. The bit set to 1 of the last 8 bits of hpnicfCBQoSMatchRuleIntValue1 is used to indicate the 8 value 0~7. for example: 0x53(Binary format is 01010011) means the match rule is 'if-match mpls 0 1 4 6' PacketLength: 1~2000. hpnicfCBQoSMatchRuleIntValue1 is used to indicate the minimum value, hpnicfCBQoSMatchRuleIntValue2 is used to indicate the maximum value. ForwardingLayer: {bridge(1), route(2)} other types: Set is not permitted. 0xffffffff will be returned when getting. 
.1.3.6.1.4.1.11.2.14.11.15.2.65.2.1.1.3.1.6,HPN-ICF-CBQOS2-MIB::hpnicfCBQoSMatchRuleIntValue2,Unsigned32,read-create,,current,,Value of Match Rule. RtpPort: end-port: 2000~65535 Dscp: value:0~63, up to 8 values can be input. The bit set to 1 of hpnicfCBQoSMatchRuleIntValue1 is used to indicate the value 32~63. The bit set to 1 of hpnicfCBQoSMatchRuleIntValue2 is used to indicate the value 0~31. for example: 0x80000003 means the match rule is 'if-match dscp 0 1 31' PacketLength: 1~2000. hpnicfCBQoSMatchRuleIntValue1 is used to indicate the minimum value, hpnicfCBQoSMatchRuleIntValue2 is used to indicate the maximum value. other types: Set is not permitted. 0xffffffff will be returned when getting. 
.1.3.6.1.4.1.11.2.14.11.15.2.65.2.1.1.3.1.7,HPN-ICF-CBQOS2-MIB::hpnicfCBQoSMatchIpAddressType,INTEGER,read-create,,current,unknown(0):ipv4(1):ipv6(2):ipv4z(3):ipv6z(4):dns(16),A value that represents a type of Internet address. unknown(0) An unknown address type. This value MUST be used if the value of the corresponding InetAddress object is a zero-length string. It may also be used to indicate an IP address which is not in one of the formats defined below. ipv4(1) An IPv4 address as defined by the InetAddressIPv4 textual convention. ipv6(2) A global IPv6 address as defined by the InetAddressIPv6 textual convention. ipv4z(3) A non-global IPv4 address including a zone index as defined by the InetAddressIPv4z textual convention. ipv6z(4) A non-global IPv6 address including a zone index as defined by the InetAddressIPv6z textual convention. dns(16) A DNS domain name as defined by the InetAddressDNS textual convention. Value of match rule. SourceIp support this node. other types: Set is not permitted. Unknown will be returned when getting. 
.1.3.6.1.4.1.11.2.14.11.15.2.65.2.1.1.3.1.8,HPN-ICF-CBQOS2-MIB::hpnicfCBQoSMatchIpAddress,OCTET,read-create,,current,,Denotes a generic Internet address. SourceIP support this node. other types: Set is not permitted. NULL will be returned when getting. 
.1.3.6.1.4.1.11.2.14.11.15.2.65.2.1.1.3.1.9,HPN-ICF-CBQOS2-MIB::hpnicfCBQoSMatchRuleRowStatus,INTEGER,read-create,,current,active(1):notInService(2):notReady(3):createAndGo(4):createAndWait(5):destroy(6),RowStatus.
.1.3.6.1.4.1.11.2.14.11.15.2.65.2.1.1.4,HPN-ICF-CBQOS2-MIB::hpnicfCBQoSMatchCpProtoCfgTable,,not-accessible,,current,,A table of Matching CpProtocol Rule configuration information.
.1.3.6.1.4.1.11.2.14.11.15.2.65.2.1.1.4.1,HPN-ICF-CBQOS2-MIB::hpnicfCBQoSMatchCpProtoCfgEntry,,not-accessible,hpnicfCBQoSClassifierIndex:hpnicfCBQoSMatchRuleIndex,current,,Matching CpProtocol Rule Configuration Information Entry.
.1.3.6.1.4.1.11.2.14.11.15.2.65.2.1.1.4.1.1,HPN-ICF-CBQOS2-MIB::hpnicfCBQoSMatchCpProtoIfNot,INTEGER,read-create,,current,match(1):matchNot(2),Whether the if-match rule is a match or matchNot statement. Software QoS supports match, matchNot. Hardware QoS supports match. 
.1.3.6.1.4.1.11.2.14.11.15.2.65.2.1.1.4.1.2,HPN-ICF-CBQOS2-MIB::hpnicfCBQoSMatchCpProtoValue,OCTET,read-create,,current,,Value of Cp Protocol, SIZE (1..23). Up to 8 values can be input. for example: 1#2#3#4#5 means the match rule is 'if-match control-plane protocol arp arp-snooping bgp bgp4+ bpdu-tunnel'; arp: 1 arp-snooping: 2 bgp: 3 bgp4+: 4 bpdu-tunnel: 5 cdp: 6 cfd: 7 dhcp: 8 dhcp-snooping: 9 dhcp6: 10 dldp: 11 dot1x: 12 gmrp: 13 gvrp: 14 http: 15 https: 16 icmp: 17 icmp6: 18 igmp: 19 igmp-snooping: 20 irdp: 21 isis: 22 lacp: 23 ldp: 24 ldp6: 25 lldp: 26 mld: 27 msdp: 28 ntp: 29 oam: 30 ospf-multicast: 31 ospf-unicast: 32 ospf3-multicast: 33 ospf3-unicast: 34 pagp: 35 pim-multicast: 36 pim-unicast: 37 pim6-multicast: 38 pim6-unicast: 39 portal: 40 pppoe-negotiation: 41 pvst: 42 radius: 43 rip: 44 ripng: 45 rrpp: 46 rsvp: 47 smart-link: 48 snmp: 49 stp: 50 tacas: 51 udld: 52 udp-helper: 53 vrrp: 54 vrrp6: 55 vtp: 56 ip-option: 57 ipv6-option: 58 ssh: 59 telnet: 60
.1.3.6.1.4.1.11.2.14.11.15.2.65.2.1.1.4.1.3,HPN-ICF-CBQOS2-MIB::hpnicfCBQoSMatchCpProtoRowStatus,INTEGER,read-create,,current,active(1):notInService(2):notReady(3):createAndGo(4):createAndWait(5):destroy(6),RowStatus.
.1.3.6.1.4.1.11.2.14.11.15.2.65.2.1.1.5,HPN-ICF-CBQOS2-MIB::hpnicfCBQoSMatchCpGroupCfgTable,,not-accessible,,current,,A table of matching Cp protocol group rule configuration information.
.1.3.6.1.4.1.11.2.14.11.15.2.65.2.1.1.5.1,HPN-ICF-CBQOS2-MIB::hpnicfCBQoSMatchCpGroupCfgEntry,,not-accessible,hpnicfCBQoSClassifierIndex:hpnicfCBQoSMatchRuleIndex,current,,Matching Cp protocol group Rule Configuration Information Entry.
.1.3.6.1.4.1.11.2.14.11.15.2.65.2.1.1.5.1.1,HPN-ICF-CBQOS2-MIB::hpnicfCBQoSMatchCpGroupIfNot,INTEGER,read-create,,current,match(1):matchNot(2),Whether the if-match rule is a match or matchNot statement. Software QoS supports match, matchNot. Hardware QoS supports match. 
.1.3.6.1.4.1.11.2.14.11.15.2.65.2.1.1.5.1.2,HPN-ICF-CBQOS2-MIB::hpnicfCBQoSMatchCpGroupValue,INTEGER,read-create,,current,critical(1):important(2):management(3):normal(4):redirect(5):monitor(6):exception(7),Type of Cp protocol group. 
.1.3.6.1.4.1.11.2.14.11.15.2.65.2.1.1.5.1.3,HPN-ICF-CBQOS2-MIB::hpnicfCBQoSMatchCpGroupRowStatus,INTEGER,read-create,,current,active(1):notInService(2):notReady(3):createAndGo(4):createAndWait(5):destroy(6),RowStatus.
.1.3.6.1.4.1.11.2.14.11.15.2.65.2.1.2,HPN-ICF-CBQOS2-MIB::hpnicfCBQoSBehaviorObjects,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.2.65.2.1.2.1,HPN-ICF-CBQOS2-MIB::hpnicfCBQoSBehaviorIndexNext,Integer32,read-only,,current,,This object contains an appropriate value to be used for hpnicfCBQoSBehaviorIndex when creating rows in the hpnicfCBQoSBehaviorCfgInfoTable.
.1.3.6.1.4.1.11.2.14.11.15.2.65.2.1.2.2,HPN-ICF-CBQOS2-MIB::hpnicfCBQoSBehaviorCfgInfoTable,,not-accessible,,current,,A table of Traffic Behavior configuration information.
.1.3.6.1.4.1.11.2.14.11.15.2.65.2.1.2.2.1,HPN-ICF-CBQOS2-MIB::hpnicfCBQoSBehaviorCfgInfoEntry,,not-accessible,hpnicfCBQoSBehaviorIndex,current,,Traffic Behavior Configuration Information Entry.
.1.3.6.1.4.1.11.2.14.11.15.2.65.2.1.2.2.1.1,HPN-ICF-CBQOS2-MIB::hpnicfCBQoSBehaviorIndex,Integer32,not-accessible,,current,,Index of Traffic Behavior.
.1.3.6.1.4.1.11.2.14.11.15.2.65.2.1.2.2.1.2,HPN-ICF-CBQOS2-MIB::hpnicfCBQoSBehaviorName,OCTET,read-create,,current,,Name of Traffic Behavior.
.1.3.6.1.4.1.11.2.14.11.15.2.65.2.1.2.2.1.3,HPN-ICF-CBQOS2-MIB::hpnicfCBQoSBehaviorType,INTEGER,read-only,,current,systemDefined(1):userDefined(2),Type of behavior.
.1.3.6.1.4.1.11.2.14.11.15.2.65.2.1.2.2.1.4,HPN-ICF-CBQOS2-MIB::hpnicfCBQoSBehaviorRowStatus,INTEGER,read-create,,current,active(1):notInService(2):notReady(3):createAndGo(4):createAndWait(5):destroy(6),RowStatus.
.1.3.6.1.4.1.11.2.14.11.15.2.65.2.1.2.3,HPN-ICF-CBQOS2-MIB::hpnicfCBQoSCarCfgInfoTable,,not-accessible,,current,,A table of CAR feature configuration information.
.1.3.6.1.4.1.11.2.14.11.15.2.65.2.1.2.3.1,HPN-ICF-CBQOS2-MIB::hpnicfCBQoSCarCfgInfoEntry,,not-accessible,hpnicfCBQoSBehaviorIndex,current,,CAR Configuration Information Entry.
.1.3.6.1.4.1.11.2.14.11.15.2.65.2.1.2.3.1.1,HPN-ICF-CBQOS2-MIB::hpnicfCBQoSCarCir,Unsigned32,read-create,,current,,Committed Information Rate. Unit: kbps.
.1.3.6.1.4.1.11.2.14.11.15.2.65.2.1.2.3.1.2,HPN-ICF-CBQOS2-MIB::hpnicfCBQoSCarCbs,Unsigned32,read-create,,current,,Committed Burst Size. Unit: byte.
.1.3.6.1.4.1.11.2.14.11.15.2.65.2.1.2.3.1.3,HPN-ICF-CBQOS2-MIB::hpnicfCBQoSCarEbs,Unsigned32,read-create,,current,,Excess Burst Size. Unit: byte. Only software QoS support this node. 4294967295 is returned only when getting value from hardware QoS. 4294967295 can't be set.
.1.3.6.1.4.1.11.2.14.11.15.2.65.2.1.2.3.1.4,HPN-ICF-CBQOS2-MIB::hpnicfCBQoSCarPir,Unsigned32,read-create,,current,,Peak Information Rate. Unit: kbps. Only hardware QoS support this node. 4294967295 is returned only when getting value from software QoS. 4294967295 can't be set.
.1.3.6.1.4.1.11.2.14.11.15.2.65.2.1.2.3.1.5,HPN-ICF-CBQOS2-MIB::hpnicfCBQoSCarPbs,Unsigned32,read-create,,current,,Peak Burst Size. Unit: byte. Only hardware QoS support this node. 4294967295 is returned only when getting value from software QoS. 4294967295 can't be set.
.1.3.6.1.4.1.11.2.14.11.15.2.65.2.1.2.3.1.6,HPN-ICF-CBQOS2-MIB::hpnicfCBQoSCarGreenAction,INTEGER,read-create,,current,invalid(0):pass(1):continue(2):discard(3):remark(4):remark-ip-continue(5):remark-ip-pass(6):remark-mplsexp-continue(7):remark-mplsexp-pass(8):remark-dscp-continue(9):remark-dscp-pass(10):remark-dot1p-continue(11):remark-dot1p-pass(12):remark-atm-clp-continue(13):remark-atm-clp-pass(14):remark-fr-de-continue(15):remark-fr-de-pass(16):remark-local-pre-pass(17):remark-drop-pre-pass(18),Green Action Hardware QoS : pass, discard, remark. Software QoS : pass, discard, remark IP Precedence, remark DSCP, remark MPLS EXP. 
.1.3.6.1.4.1.11.2.14.11.15.2.65.2.1.2.3.1.7,HPN-ICF-CBQOS2-MIB::hpnicfCBQoSCarGreenRemarkValue,Integer32,read-create,,current,,The value is to remark When green action is remarking. For remarking DSCP, the range is 0~63; For remarking IP Precedence and MPLS EXP, the range is 0~7; Only software QoS support this node. 255 is returned only when getting value from hardware QoS or when action being pass,discard of software QoS. 255 can't be set. 
.1.3.6.1.4.1.11.2.14.11.15.2.65.2.1.2.3.1.8,HPN-ICF-CBQOS2-MIB::hpnicfCBQoSCarYellowAction,INTEGER,read-create,,current,invalid(0):pass(1):continue(2):discard(3):remark(4):remark-ip-continue(5):remark-ip-pass(6):remark-mplsexp-continue(7):remark-mplsexp-pass(8):remark-dscp-continue(9):remark-dscp-pass(10):remark-dot1p-continue(11):remark-dot1p-pass(12):remark-atm-clp-continue(13):remark-atm-clp-pass(14):remark-fr-de-continue(15):remark-fr-de-pass(16):remark-local-pre-pass(17):remark-drop-pre-pass(18),Yellow Action: Only hardware QoS support this node. Hardware QoS support pass, discard, remark. invalid is returned only when getting value from software QoS. invalid can't be set. 
.1.3.6.1.4.1.11.2.14.11.15.2.65.2.1.2.3.1.9,HPN-ICF-CBQOS2-MIB::hpnicfCBQoSCarYellowRemarkValue,Integer32,read-create,,current,,The value is to remark When red action is remarking. For remarking DSCP, the range is 0~63; For remarking IP Precedence and MPLS EXP, the range is 0~7; Only software QoS support this node. 255 is returned only when getting value from hardware QoS or when action being pass, discard of software QoS. 255 can't be set.
.1.3.6.1.4.1.11.2.14.11.15.2.65.2.1.2.3.1.10,HPN-ICF-CBQOS2-MIB::hpnicfCBQoSCarRedAction,INTEGER,read-create,,current,invalid(0):pass(1):continue(2):discard(3):remark(4):remark-ip-continue(5):remark-ip-pass(6):remark-mplsexp-continue(7):remark-mplsexp-pass(8):remark-dscp-continue(9):remark-dscp-pass(10):remark-dot1p-continue(11):remark-dot1p-pass(12):remark-atm-clp-continue(13):remark-atm-clp-pass(14):remark-fr-de-continue(15):remark-fr-de-pass(16):remark-local-pre-pass(17):remark-drop-pre-pass(18),Red Action: Hardware QoS : pass, discard, remark. Software QoS : pass, discard, remark IP Precedence, remark DSCP, remark MPLS EXP. 
.1.3.6.1.4.1.11.2.14.11.15.2.65.2.1.2.3.1.11,HPN-ICF-CBQOS2-MIB::hpnicfCBQoSCarRedRemarkValue,Integer32,read-create,,current,,The value is to remark When red action is remarking. For remarking DSCP, the range is 0~63; For remarking IP Precedence and MPLS EXP, the range is 0~7; Only software QoS support this node. 255 is returned only when getting value from hardware QoS or when action being pass, discard of software QoS. 255 can't be set.
.1.3.6.1.4.1.11.2.14.11.15.2.65.2.1.2.3.1.12,HPN-ICF-CBQOS2-MIB::hpnicfCBQoSCarPolicedPriorityMapType,INTEGER,read-create,,current,none(0):policed-service-map(1):local-precedence-dot1p-map(2):drop-precedence-map(3),Type of priority map.
.1.3.6.1.4.1.11.2.14.11.15.2.65.2.1.2.3.1.13,HPN-ICF-CBQOS2-MIB::hpnicfCBQoSCarRowStatus,INTEGER,read-create,,current,active(1):notInService(2):notReady(3):createAndGo(4):createAndWait(5):destroy(6),RowStatus.
.1.3.6.1.4.1.11.2.14.11.15.2.65.2.1.2.4,HPN-ICF-CBQOS2-MIB::hpnicfCBQoSAggregativeCarCfgInfoTable,,not-accessible,,current,,A table of aggregative CAR applied CBQ feature configuration information. Aggregative CAR is managed by HPN-ICF-IFQOS2-MIB. So, you can use HPN-ICF-IFQOS2-MIB to get some details information about aggregative CAR. 
.1.3.6.1.4.1.11.2.14.11.15.2.65.2.1.2.4.1,HPN-ICF-CBQOS2-MIB::hpnicfCBQoSAggregativeCarCfgInfoEntry,,not-accessible,hpnicfCBQoSBehaviorIndex:hpnicfCBQoSCarAggregativeCarIndex,current,,Aggregative CAR feature applied CBQ configuration information entry.
.1.3.6.1.4.1.11.2.14.11.15.2.65.2.1.2.4.1.1,HPN-ICF-CBQOS2-MIB::hpnicfCBQoSCarAggregativeCarIndex,Integer32,not-accessible,,current,,Index of aggregative CAR. It is equal to hpnicfIfQoSAggregativeCarIndex at HPN-ICF-IFQOS2-MIB. 
.1.3.6.1.4.1.11.2.14.11.15.2.65.2.1.2.4.1.2,HPN-ICF-CBQOS2-MIB::hpnicfCBQoSCarAggregativeCarName,OCTET,read-only,,current,,Name of aggregative CAR. It is equal to hpnicfIfQoSAggregativeCarName at HPN-ICF-IFQOS2-MIB. 
.1.3.6.1.4.1.11.2.14.11.15.2.65.2.1.2.4.1.3,HPN-ICF-CBQOS2-MIB::hpnicfCBQoSAggregativeCarRowStatus,INTEGER,read-create,,current,active(1):notInService(2):notReady(3):createAndGo(4):createAndWait(5):destroy(6),RowStatus.
.1.3.6.1.4.1.11.2.14.11.15.2.65.2.1.2.5,HPN-ICF-CBQOS2-MIB::hpnicfCBQoSGtsCfgInfoTable,,not-accessible,,current,,A table of GTS feature configuration information.
.1.3.6.1.4.1.11.2.14.11.15.2.65.2.1.2.5.1,HPN-ICF-CBQOS2-MIB::hpnicfCBQoSGtsCfgInfoEntry,,not-accessible,hpnicfCBQoSBehaviorIndex,current,,GTS Configuration Information Entry.
.1.3.6.1.4.1.11.2.14.11.15.2.65.2.1.2.5.1.1,HPN-ICF-CBQOS2-MIB::hpnicfCBQoSGtsCir,Unsigned32,read-create,,current,,Committed Information Rate. Unit: kbps
.1.3.6.1.4.1.11.2.14.11.15.2.65.2.1.2.5.1.2,HPN-ICF-CBQOS2-MIB::hpnicfCBQoSGtsCbs,Unsigned32,read-create,,current,,Committed Burst Size. Unit: byte default: max(cir*1/2,15000)
.1.3.6.1.4.1.11.2.14.11.15.2.65.2.1.2.5.1.3,HPN-ICF-CBQOS2-MIB::hpnicfCBQoSGtsEbs,Unsigned32,read-create,,current,,Excess Burst Size. Unit: byte
.1.3.6.1.4.1.11.2.14.11.15.2.65.2.1.2.5.1.4,HPN-ICF-CBQOS2-MIB::hpnicfCBQoSGtsQueueLength,Integer32,read-create,,current,,The length of GTS buffer.
.1.3.6.1.4.1.11.2.14.11.15.2.65.2.1.2.5.1.5,HPN-ICF-CBQOS2-MIB::hpnicfCBQoSGtsRowStatus,INTEGER,read-create,,current,active(1):notInService(2):notReady(3):createAndGo(4):createAndWait(5):destroy(6),RowStatus.
.1.3.6.1.4.1.11.2.14.11.15.2.65.2.1.2.5.1.6,HPN-ICF-CBQOS2-MIB::hpnicfCBQoSGtsPir,Unsigned32,read-create,,current,,Peak Information Rate. 
.1.3.6.1.4.1.11.2.14.11.15.2.65.2.1.2.6,HPN-ICF-CBQOS2-MIB::hpnicfCBQoSRemarkCfgInfoTable,,not-accessible,,current,,A table of Remarking feature configuration information.
.1.3.6.1.4.1.11.2.14.11.15.2.65.2.1.2.6.1,HPN-ICF-CBQOS2-MIB::hpnicfCBQoSRemarkCfgInfoEntry,,not-accessible,hpnicfCBQoSBehaviorIndex:hpnicfCBQoSRemarkType,current,,Remarking Configuration Information Entry.
.1.3.6.1.4.1.11.2.14.11.15.2.65.2.1.2.6.1.1,HPN-ICF-CBQOS2-MIB::hpnicfCBQoSRemarkType,INTEGER,not-accessible,,current,typeIpPrecedence(1):typeDscp(2):typeMplsExp(3):typeVlan8021p(4):typeAtmClp(5):typeFrDe(6):typeVlanID(7):typeQosLocalID(8):typeDropPrecedence(9):typeLocalPrecedence(10):typeTopMostVlanID(11):typeSecondMplsExp(12),Remark type.
.1.3.6.1.4.1.11.2.14.11.15.2.65.2.1.2.6.1.2,HPN-ICF-CBQOS2-MIB::hpnicfCBQoSRemarkValue,Integer32,read-create,,current,,Value to remark: for IpPrecedence: 0~7 for Dscp: 0~63 for MplsExp: 0~7 for Vlan8021p: 0~7 for AtmClp: 0~1 for FrDe: 0~1 for VlanID: 1~4094 for QosLocalID: 1~4095 for DropPrecedence: 0~2 for LocalPrecedence: 0~7 for TopMostVlanID: 1~4094 for SecondMplsExp: 0~7 
.1.3.6.1.4.1.11.2.14.11.15.2.65.2.1.2.6.1.3,HPN-ICF-CBQOS2-MIB::hpnicfCBQoSRemarkRowStatus,INTEGER,read-create,,current,active(1):notInService(2):notReady(3):createAndGo(4):createAndWait(5):destroy(6),RowStatus
.1.3.6.1.4.1.11.2.14.11.15.2.65.2.1.2.7,HPN-ICF-CBQOS2-MIB::hpnicfCBQoSQueueCfgInfoTable,,not-accessible,,current,,A table of queue feature configuration information.
.1.3.6.1.4.1.11.2.14.11.15.2.65.2.1.2.7.1,HPN-ICF-CBQOS2-MIB::hpnicfCBQoSQueueCfgInfoEntry,,not-accessible,hpnicfCBQoSBehaviorIndex,current,,Queue Configuration Information Entry.
.1.3.6.1.4.1.11.2.14.11.15.2.65.2.1.2.7.1.1,HPN-ICF-CBQOS2-MIB::hpnicfCBQoSQueueType,INTEGER,read-create,,current,ef(1):af(2):wfq(3),Queueing Type: EF:(1) AF:(2) WFQ:(3)
.1.3.6.1.4.1.11.2.14.11.15.2.65.2.1.2.7.1.2,HPN-ICF-CBQOS2-MIB::hpnicfCBQoSQueueDropType,INTEGER,read-create,,current,typeUnavailable(0):typeTailDrop(1):typeWred(2),The drop type of queue. Only valid for AF and WFQ queue. typeUnavailable is returned only when getting value about EF queue. typeUnavailable can't be set.
.1.3.6.1.4.1.11.2.14.11.15.2.65.2.1.2.7.1.3,HPN-ICF-CBQOS2-MIB::hpnicfCBQoSQueueLength,Integer32,read-create,,current,,The length of QueueLength. Only valid for tail-drop type of AF and WFQ queue. 2147483647 is returned only when getting value about EF queue or WRED type of AF and WFQ queue. 2147483647 can't be set.
.1.3.6.1.4.1.11.2.14.11.15.2.65.2.1.2.7.1.4,HPN-ICF-CBQOS2-MIB::hpnicfCBQoSQueueBandwidthUnit,INTEGER,read-create,,current,unitUnavailable(0):unitAbsolute(1):unitPercent(2):unitRemainPercent(3),Bandwidth Unit: Absolute, Unit Kbps (1) Percent, Unit % (2) RemainPercent, Unit % of remained bandwidth (3) Only valid for EF and AF queue. 0 is returned only when getting value about WFQ queue. 0 can't be set. 
.1.3.6.1.4.1.11.2.14.11.15.2.65.2.1.2.7.1.5,HPN-ICF-CBQOS2-MIB::hpnicfCBQoSQueueBandwidthValue,Integer32,read-create,,current,,Bandwidth value: Absolute value: 8~10000000. Unit: Kbps Percent value: 1~100. Only valid for EF and AF queue. 2147483647 is returned only when getting value about WFQ queue. 2147483647 can't be set.
.1.3.6.1.4.1.11.2.14.11.15.2.65.2.1.2.7.1.6,HPN-ICF-CBQOS2-MIB::hpnicfCBQoSQueueCbs,Integer32,read-create,,current,,Committed Burst Size. Unit: byte. Only valid for EF queue. Default: If the value of 'hpnicfCBQoSQueueBandwidthValue * 25' is between 1500 and 2000000, the default value of this object is 'hpnicfCBQoSQueueBandwidthValue * 25';If the value of 'hpnicfCBQoSQueueBandwidthValue * 25' is larger than or equal to 2000000, the default value of this object is 2000000; If the value of 'hpnicfCBQoSQueueBandwidthValue * 25' is less than or equal to 1500, the default value of this object is 1500. 2147483647 is returned only when getting value about AF or WFQ queue. 2147483647 can't be set.
.1.3.6.1.4.1.11.2.14.11.15.2.65.2.1.2.7.1.7,HPN-ICF-CBQOS2-MIB::hpnicfCBQoSQueueQueueNumber,INTEGER,read-create,,current,unavailable(0):a16(16):a32(32):a64(64):a128(128):a256(256):a512(512):a1024(1024):a2048(2048):a4096(4096),Max number of hashed queues (a power of 2). Only valid for WFQ. 'unavailable' is returned only when getting value about AF or EF queue. 'unavailable' can't be set.
.1.3.6.1.4.1.11.2.14.11.15.2.65.2.1.2.7.1.8,HPN-ICF-CBQOS2-MIB::hpnicfCBQoSQueueCbsRatio,Integer32,read-create,,current,,Committed Burst Size Ratio. CBS = CBS_Ratio * Bandwidth(k bps) Only valid for EF queue. 2147483647 is returned only when getting value about AF or WFQ queue. 2147483647 can't be set. 
.1.3.6.1.4.1.11.2.14.11.15.2.65.2.1.2.7.1.9,HPN-ICF-CBQOS2-MIB::hpnicfCBQoSQueueRowStatus,INTEGER,read-create,,current,active(1):notInService(2):notReady(3):createAndGo(4):createAndWait(5):destroy(6),RowStatus.
.1.3.6.1.4.1.11.2.14.11.15.2.65.2.1.2.8,HPN-ICF-CBQOS2-MIB::hpnicfCBQoSWredCfgInfoTable,,not-accessible,,current,,A table of WRED configuration information.
.1.3.6.1.4.1.11.2.14.11.15.2.65.2.1.2.8.1,HPN-ICF-CBQOS2-MIB::hpnicfCBQoSWredCfgInfoEntry,,not-accessible,hpnicfCBQoSBehaviorIndex,current,,WRED Configuration Information Entry.
.1.3.6.1.4.1.11.2.14.11.15.2.65.2.1.2.8.1.1,HPN-ICF-CBQOS2-MIB::hpnicfCBQoSWredType,INTEGER,read-write,,current,typeIpPrecBased(1):typeDscpBased(2):typeDropLevelBased(3):typeAtmClpBased(4):typeVlan8021pBased(5):typeMplsExpBased(6),WRED type.
.1.3.6.1.4.1.11.2.14.11.15.2.65.2.1.2.8.1.2,HPN-ICF-CBQOS2-MIB::hpnicfCBQoSWredWeightConst,Integer32,read-write,,current,,Specify weight for calculating mean queue depth.
.1.3.6.1.4.1.11.2.14.11.15.2.65.2.1.2.9,HPN-ICF-CBQOS2-MIB::hpnicfCBQoSWredClassCfgInfoTable,,not-accessible,,current,,A table of WRED configuration information.
.1.3.6.1.4.1.11.2.14.11.15.2.65.2.1.2.9.1,HPN-ICF-CBQOS2-MIB::hpnicfCBQoSWredClassCfgInfoEntry,,not-accessible,hpnicfCBQoSBehaviorIndex:hpnicfCBQoSWredClassValue,current,,WRED Class Configuration Information Entry.
.1.3.6.1.4.1.11.2.14.11.15.2.65.2.1.2.9.1.1,HPN-ICF-CBQOS2-MIB::hpnicfCBQoSWredClassValue,Integer32,not-accessible,,current,,The class value. For IP precedence based WRED, the class is IP precedence, and range is 0~7. For DSCP based WRED, the class is DSCP, and range is 0~63. 
.1.3.6.1.4.1.11.2.14.11.15.2.65.2.1.2.9.1.2,HPN-ICF-CBQOS2-MIB::hpnicfCBQoSWredClassLowLimit,Integer32,read-write,,current,,The low limit of queue depth.
.1.3.6.1.4.1.11.2.14.11.15.2.65.2.1.2.9.1.3,HPN-ICF-CBQOS2-MIB::hpnicfCBQoSWredClassHighLimit,Integer32,read-write,,current,,The high limit of queue depth.
.1.3.6.1.4.1.11.2.14.11.15.2.65.2.1.2.9.1.4,HPN-ICF-CBQOS2-MIB::hpnicfCBQoSWredClassDiscardProb,Integer32,read-write,,current,,The discard probability denominator.
.1.3.6.1.4.1.11.2.14.11.15.2.65.2.1.2.10,HPN-ICF-CBQOS2-MIB::hpnicfCBQoSPolicyRouteCfgInfoTable,,not-accessible,,current,,A table of Policy Routing configuration information.
.1.3.6.1.4.1.11.2.14.11.15.2.65.2.1.2.10.1,HPN-ICF-CBQOS2-MIB::hpnicfCBQoSPolicyRouteCfgInfoEntry,,not-accessible,hpnicfCBQoSBehaviorIndex,current,,Policy Routeing Configuration Information Entry.
.1.3.6.1.4.1.11.2.14.11.15.2.65.2.1.2.10.1.1,HPN-ICF-CBQOS2-MIB::hpnicfCBQoSPolicyRouteIpAddrType,INTEGER,read-create,,current,unknown(0):ipv4(1):ipv6(2):ipv4z(3):ipv6z(4):dns(16),Type of InetAddress.
.1.3.6.1.4.1.11.2.14.11.15.2.65.2.1.2.10.1.2,HPN-ICF-CBQOS2-MIB::hpnicfCBQoSPolicyRouteNexthop,OCTET,read-create,,current,,The next-hop ip address for redirection.
.1.3.6.1.4.1.11.2.14.11.15.2.65.2.1.2.10.1.3,HPN-ICF-CBQOS2-MIB::hpnicfCBQoSPolicyRouteBackup,INTEGER,read-create,,current,backup(1):notbackup(2),Whether forward the packet according to the routing table When the next-hop IP address for redirection is not valid. Backup means forwarding. NoBackup means not forwarding. 
.1.3.6.1.4.1.11.2.14.11.15.2.65.2.1.2.10.1.4,HPN-ICF-CBQOS2-MIB::hpnicfCBQoSPolicyRouteRowStatus,INTEGER,read-create,,current,active(1):notInService(2):notReady(3):createAndGo(4):createAndWait(5):destroy(6),RowStatus.
.1.3.6.1.4.1.11.2.14.11.15.2.65.2.1.2.11,HPN-ICF-CBQOS2-MIB::hpnicfCBQoSNatCfgInfoTable,,not-accessible,,current,,A table of Nat configuration information.
.1.3.6.1.4.1.11.2.14.11.15.2.65.2.1.2.11.1,HPN-ICF-CBQOS2-MIB::hpnicfCBQoSNatCfgInfoEntry,,not-accessible,hpnicfCBQoSBehaviorIndex,current,,Nat Configuration Information Entry.
.1.3.6.1.4.1.11.2.14.11.15.2.65.2.1.2.11.1.1,HPN-ICF-CBQOS2-MIB::hpnicfCBQoSNatMainNumber,Integer32,read-create,,current,,The main ISP number.
.1.3.6.1.4.1.11.2.14.11.15.2.65.2.1.2.11.1.2,HPN-ICF-CBQOS2-MIB::hpnicfCBQoSNatBackupNumber,Integer32,read-create,,current,,The backup ISP number
.1.3.6.1.4.1.11.2.14.11.15.2.65.2.1.2.11.1.3,HPN-ICF-CBQOS2-MIB::hpnicfCBQoSNatServiceClass,Integer32,read-create,,current,,The service class.
.1.3.6.1.4.1.11.2.14.11.15.2.65.2.1.2.11.1.4,HPN-ICF-CBQOS2-MIB::hpnicfCBQoSNatRowStatus,INTEGER,read-create,,current,active(1):notInService(2):notReady(3):createAndGo(4):createAndWait(5):destroy(6),RowStatus.
.1.3.6.1.4.1.11.2.14.11.15.2.65.2.1.2.12,HPN-ICF-CBQOS2-MIB::hpnicfCBQoSFirewallCfgInfoTable,,not-accessible,,current,,A table of firewall configuration information.
.1.3.6.1.4.1.11.2.14.11.15.2.65.2.1.2.12.1,HPN-ICF-CBQOS2-MIB::hpnicfCBQoSFirewallCfgInfoEntry,,not-accessible,hpnicfCBQoSBehaviorIndex,current,,Firewall configuration information entry.
.1.3.6.1.4.1.11.2.14.11.15.2.65.2.1.2.12.1.1,HPN-ICF-CBQOS2-MIB::hpnicfCBQoSFirewallAction,INTEGER,read-create,,current,permit(1):deny(2),The firewall action 
.1.3.6.1.4.1.11.2.14.11.15.2.65.2.1.2.12.1.2,HPN-ICF-CBQOS2-MIB::hpnicfCBQoSFirewallRowStatus,INTEGER,read-create,,current,active(1):notInService(2):notReady(3):createAndGo(4):createAndWait(5):destroy(6),RowStatus.
.1.3.6.1.4.1.11.2.14.11.15.2.65.2.1.2.13,HPN-ICF-CBQOS2-MIB::hpnicfCBQoSSamplingCfgInfoTable,,not-accessible,,current,,A table of sampling configuration information.
.1.3.6.1.4.1.11.2.14.11.15.2.65.2.1.2.13.1,HPN-ICF-CBQOS2-MIB::hpnicfCBQoSSamplingCfgInfoEntry,,not-accessible,hpnicfCBQoSBehaviorIndex,current,,Sampling configuration information entry.
.1.3.6.1.4.1.11.2.14.11.15.2.65.2.1.2.13.1.1,HPN-ICF-CBQOS2-MIB::hpnicfCBQoSSamplingNum,Integer32,read-create,,current,,The sampling number.
.1.3.6.1.4.1.11.2.14.11.15.2.65.2.1.2.13.1.2,HPN-ICF-CBQOS2-MIB::hpnicfCBQoSSamplingRowStatus,INTEGER,read-create,,current,active(1):notInService(2):notReady(3):createAndGo(4):createAndWait(5):destroy(6),RowStatus.
.1.3.6.1.4.1.11.2.14.11.15.2.65.2.1.2.14,HPN-ICF-CBQOS2-MIB::hpnicfCBQoSAccountCfgInfoTable,,not-accessible,,current,,A table of account configuration information.
.1.3.6.1.4.1.11.2.14.11.15.2.65.2.1.2.14.1,HPN-ICF-CBQOS2-MIB::hpnicfCBQoSAccountCfgInfoEntry,,not-accessible,hpnicfCBQoSBehaviorIndex,current,,Account configuration information entry.
.1.3.6.1.4.1.11.2.14.11.15.2.65.2.1.2.14.1.1,HPN-ICF-CBQOS2-MIB::hpnicfCBQoSAccounting,INTEGER,read-create,,current,true(1):false(2),Account action.
.1.3.6.1.4.1.11.2.14.11.15.2.65.2.1.2.14.1.2,HPN-ICF-CBQOS2-MIB::hpnicfCBQoSAccountRowStatus,INTEGER,read-create,,current,active(1):notInService(2):notReady(3):createAndGo(4):createAndWait(5):destroy(6),RowStatus.
.1.3.6.1.4.1.11.2.14.11.15.2.65.2.1.2.14.1.3,HPN-ICF-CBQOS2-MIB::hpnicfCBQoSAccountingMode,INTEGER,read-create,,current,auto(1):packet(2):byte(3):both(4),Account mode.
.1.3.6.1.4.1.11.2.14.11.15.2.65.2.1.2.15,HPN-ICF-CBQOS2-MIB::hpnicfCBQoSRedirectCfgInfoTable,,not-accessible,,current,,A table of redirect configuration information.
.1.3.6.1.4.1.11.2.14.11.15.2.65.2.1.2.15.1,HPN-ICF-CBQOS2-MIB::hpnicfCBQoSRedirectCfgInfoEntry,,not-accessible,hpnicfCBQoSBehaviorIndex,current,,Redirect configuration information entry.
.1.3.6.1.4.1.11.2.14.11.15.2.65.2.1.2.15.1.1,HPN-ICF-CBQOS2-MIB::hpnicfCBQoSRedirectType,INTEGER,read-create,,current,cpu(1):interface(2):nextHop(3),The type of redirect.
.1.3.6.1.4.1.11.2.14.11.15.2.65.2.1.2.15.1.2,HPN-ICF-CBQOS2-MIB::hpnicfCBQoSRedirectIfIndex,Integer32,read-create,,current,,ifIndex. Only the value of hpnicfCBQoSRedirectType is interface, can be set this node. 
.1.3.6.1.4.1.11.2.14.11.15.2.65.2.1.2.15.1.3,HPN-ICF-CBQOS2-MIB::hpnicfCBQoSRedirectIpAddressType,INTEGER,read-create,,current,unknown(0):ipv4(1):ipv6(2):ipv4z(3):ipv6z(4):dns(16),A value that represents a type of Internet address. unknown(0) An unknown address type. This value MUST be used if the value of the corresponding InetAddress object is a zero-length string. It may also be used to indicate an IP address which is not in one of the formats defined below. ipv4(1) An IPv4 address as defined by the InetAddressIPv4 textual convention. ipv6(2) A global IPv6 address as defined by the InetAddressIPv6 textual convention. ipv4z(3) A non-global IPv4 address including a zone index as defined by the InetAddressIPv4z textual convention. ipv6z(4) A non-global IPv6 address including a zone index as defined by the InetAddressIPv6z textual convention. dns(16) A DNS domain name as defined by the InetAddressDNS textual convention. Now supports ipv4 and ipv6. Only the value of hpnicfCBQoSRedirectType is next-hop, can be set this node and hpnicfCBQoSRedirectIpAddress1 or hpnicfCBQoSRedirectIpAddress2. 
.1.3.6.1.4.1.11.2.14.11.15.2.65.2.1.2.15.1.4,HPN-ICF-CBQOS2-MIB::hpnicfCBQoSRedirectIpAddress1,OCTET,read-create,,current,,IP Address. If the value of hpnicfCBQoSRedirectType is not next-hop, zero-length string will be returned when getting. If the value of hpnicfCBQoSRedirectIpAddressType is ipv6, this node is set necessarily. 
.1.3.6.1.4.1.11.2.14.11.15.2.65.2.1.2.15.1.5,HPN-ICF-CBQOS2-MIB::hpnicfCBQoSRedirectIpAddress2,OCTET,read-create,,current,,IP Address. If the value of hpnicfCBQoSRedirectType is not next-hop, zero-length string will be returned when getting. If the value of hpnicfCBQoSRedirectIpAddressType is ipv6, this node is set optionally. 
.1.3.6.1.4.1.11.2.14.11.15.2.65.2.1.2.15.1.6,HPN-ICF-CBQOS2-MIB::hpnicfCBQoSRedirectRowStatus,INTEGER,read-create,,current,active(1):notInService(2):notReady(3):createAndGo(4):createAndWait(5):destroy(6),RowStatus.
.1.3.6.1.4.1.11.2.14.11.15.2.65.2.1.2.15.1.7,HPN-ICF-CBQOS2-MIB::hpnicfCBQoSRedirectIpv6Interface1,Integer32,read-create,,current,,IfIndex for ipv6 next hop . If and only if the value of hpnicfCBQoSRedirectIpAddressType is ipv6 and hpnicfCBQoSRedirectIpAddress1 is set, this node can be set. 
.1.3.6.1.4.1.11.2.14.11.15.2.65.2.1.2.15.1.8,HPN-ICF-CBQOS2-MIB::hpnicfCBQoSRedirectIpv6Interface2,Integer32,read-create,,current,,IfIndex for ipv6 next hop . If and only if the value of hpnicfCBQoSRedirectIpAddressType is ipv6 and hpnicfCBQoSRedirectIpAddress2 is set, this node can be set. 
.1.3.6.1.4.1.11.2.14.11.15.2.65.2.1.2.15.1.9,HPN-ICF-CBQOS2-MIB::hpnicfCBQoSRedirectIfVlanID,Integer32,read-create,,current,,VLAN-ID to tag. If and only if the value of hpnicfCBQoSRedirectType is interface, this node can be set. 
.1.3.6.1.4.1.11.2.14.11.15.2.65.2.1.2.16,HPN-ICF-CBQOS2-MIB::hpnicfCBQoSPriorityMapCfgInfoTable,,not-accessible,,current,,A table of priority map configuration information.
.1.3.6.1.4.1.11.2.14.11.15.2.65.2.1.2.16.1,HPN-ICF-CBQOS2-MIB::hpnicfCBQoSPriorityMapCfgInfoEntry,,not-accessible,hpnicfCBQoSBehaviorIndex,current,,priority map configuration information entry.
.1.3.6.1.4.1.11.2.14.11.15.2.65.2.1.2.16.1.1,HPN-ICF-CBQOS2-MIB::hpnicfCBQoSPriorityMapImportType,INTEGER,read-create,,current,invalid(1):dscp(2):dot1p(3):exp(4):ipPrecedence(5):localPrecedence(6):dropPrecedence(7),Import type of map.
.1.3.6.1.4.1.11.2.14.11.15.2.65.2.1.2.16.1.2,HPN-ICF-CBQOS2-MIB::hpnicfCBQoSPriorityMapExportType,INTEGER,read-create,,current,invalid(1):dscp(2):dot1p(3):exp(4):ipPrecedence(5):localPrecedence(6):dropPrecedence(7),Export type of map.
.1.3.6.1.4.1.11.2.14.11.15.2.65.2.1.2.16.1.3,HPN-ICF-CBQOS2-MIB::hpnicfCBQoSPriorityMapGroupIndex,Integer32,read-create,,current,,Index of map group. Map group is managed by HPN-ICF-IFQOS2-MIB. 
.1.3.6.1.4.1.11.2.14.11.15.2.65.2.1.2.16.1.4,HPN-ICF-CBQOS2-MIB::hpnicfCBQoSPriorityMapGroupName,OCTET,read-only,,current,,Name of map group. Map group is managed by HPN-ICF-IFQOS2-MIB. 
.1.3.6.1.4.1.11.2.14.11.15.2.65.2.1.2.16.1.5,HPN-ICF-CBQOS2-MIB::hpnicfCBQoSPriorityMapAuto,INTEGER,read-create,,current,invalid(1):autoDscp(2):autoDot1p(3):autoMplsExp(4):autoIp(5),Type of priority MAP.
.1.3.6.1.4.1.11.2.14.11.15.2.65.2.1.2.16.1.6,HPN-ICF-CBQOS2-MIB::hpnicfCBQoSPriorityMapRowStatus,INTEGER,read-create,,current,active(1):notInService(2):notReady(3):createAndGo(4):createAndWait(5):destroy(6),RowStatus.
.1.3.6.1.4.1.11.2.14.11.15.2.65.2.1.2.17,HPN-ICF-CBQOS2-MIB::hpnicfCBQoSMirrorCfgInfoTable,,not-accessible,,current,,A table of flow mirror configuration information.
.1.3.6.1.4.1.11.2.14.11.15.2.65.2.1.2.17.1,HPN-ICF-CBQOS2-MIB::hpnicfCBQoSMirrorCfgInfoEntry,,not-accessible,hpnicfCBQoSBehaviorIndex,current,,Flow mirror configuration information entry.
.1.3.6.1.4.1.11.2.14.11.15.2.65.2.1.2.17.1.1,HPN-ICF-CBQOS2-MIB::hpnicfCBQoSMirrorType,INTEGER,read-create,,current,interface(1):cpu(2):vlan(3),Type of flow mirror.
.1.3.6.1.4.1.11.2.14.11.15.2.65.2.1.2.17.1.2,HPN-ICF-CBQOS2-MIB::hpnicfCBQoSMirrorIfIndex,OCTET,read-create,,current,,IfIndex of destination interface. Only the value of hpnicfCBQoSMirrorType is interface, can be set this node. For example: 1#11#111#1111 means the flow mirror destination ifindex is 1,11,111 and 1111. '#' is list separator for all IfIndex value. 
.1.3.6.1.4.1.11.2.14.11.15.2.65.2.1.2.17.1.3,HPN-ICF-CBQOS2-MIB::hpnicfCBQoSMirrorVlanID,Integer32,read-create,,current,,Destination vlan of flow mirror, Only the value of hpnicfCBQoSMirrorType is vlan, can be set this node. 
.1.3.6.1.4.1.11.2.14.11.15.2.65.2.1.2.17.1.4,HPN-ICF-CBQOS2-MIB::hpnicfCBQoSMirrorRowStatus,INTEGER,read-create,,current,active(1):notInService(2):notReady(3):createAndGo(4):createAndWait(5):destroy(6),RowStatus.
.1.3.6.1.4.1.11.2.14.11.15.2.65.2.1.2.18,HPN-ICF-CBQOS2-MIB::hpnicfCBQoSNestCfgInfoTable,,not-accessible,,current,,Insert a service VLAN tag or customer VLAN tag into a packet. A VLAN tag contains the VLAN ID field and the 802.1p priority field. Both the service VLAN ID and the customer VLAN ID can not be set at the same time. One of them must be set. The 802.1p priority of the service VLAN tag and that of the customer VLAN tag can be set optionally. However, both of them can not be set at the same time. The new setting overwrites the previous one.
.1.3.6.1.4.1.11.2.14.11.15.2.65.2.1.2.18.1,HPN-ICF-CBQOS2-MIB::hpnicfCBQoSNestCfgInfoEntry,,not-accessible,hpnicfCBQoSBehaviorIndex,current,,VLAN nesting table entry.
.1.3.6.1.4.1.11.2.14.11.15.2.65.2.1.2.18.1.1,HPN-ICF-CBQOS2-MIB::hpnicfCBQoSNestServiceVlanID,Integer32,read-create,,current,,VLAN ID of the service VLAN tag to be inserted. If the customer VLAN tag has been configured, 65535 is returned for the service VLAN ID. The service VLAN ID can not be set to 65535.
.1.3.6.1.4.1.11.2.14.11.15.2.65.2.1.2.18.1.2,HPN-ICF-CBQOS2-MIB::hpnicfCBQoSNestServiceDot1pValue,Integer32,read-create,,current,,802.1p priority value in the service VLAN tag to be inserted. If the 802.1p priority is not set, 65535 is returned. The 802.1p priority value can not be set to 65535.
.1.3.6.1.4.1.11.2.14.11.15.2.65.2.1.2.18.1.3,HPN-ICF-CBQOS2-MIB::hpnicfCBQoSNestCustomerVlanID,Integer32,read-create,,current,,VLAN ID of the customer VLAN tag to be inserted. If the service VLAN tag has been configured, 65535 is returned for the customer VLAN ID. The customer VLAN ID can not be set to 65535.
.1.3.6.1.4.1.11.2.14.11.15.2.65.2.1.2.18.1.4,HPN-ICF-CBQOS2-MIB::hpnicfCBQoSNestCustomerDot1pValue,Integer32,read-create,,current,,802.1p priority value in the customer VLAN tag to be inserted. If the 802.1p priority is not set, 65535 is returned. The 802.1p priority value can not be set to 65535.
.1.3.6.1.4.1.11.2.14.11.15.2.65.2.1.2.18.1.5,HPN-ICF-CBQOS2-MIB::hpnicfCBQoSNestRowStatus,INTEGER,read-create,,current,active(1):notInService(2):notReady(3):createAndGo(4):createAndWait(5):destroy(6),RowStatus
.1.3.6.1.4.1.11.2.14.11.15.2.65.2.1.2.19,HPN-ICF-CBQOS2-MIB::hpnicfCBQoSNestPolicyCfgInfoTable,,not-accessible,,current,,This table is used for configuring nest policy.
.1.3.6.1.4.1.11.2.14.11.15.2.65.2.1.2.19.1,HPN-ICF-CBQOS2-MIB::hpnicfCBQoSNestPolicyCfgInfoEntry,,not-accessible,hpnicfCBQoSBehaviorIndex,current,,Nest policy configuration entry.
.1.3.6.1.4.1.11.2.14.11.15.2.65.2.1.2.19.1.1,HPN-ICF-CBQOS2-MIB::hpnicfCBQoSNestPolicyName,OCTET,read-create,,current,,Name of the nested policy.
.1.3.6.1.4.1.11.2.14.11.15.2.65.2.1.2.19.1.2,HPN-ICF-CBQOS2-MIB::hpnicfCBQoSNestPolicyRowStatus,INTEGER,read-create,,current,active(1):notInService(2):notReady(3):createAndGo(4):createAndWait(5):destroy(6),RowStatus
.1.3.6.1.4.1.11.2.14.11.15.2.65.2.1.2.20,HPN-ICF-CBQOS2-MIB::hpnicfCBQoSMirrorIfCfgInfoTable,,not-accessible,,current,,A table of flow mirroring to interface configuration information.
.1.3.6.1.4.1.11.2.14.11.15.2.65.2.1.2.20.1,HPN-ICF-CBQOS2-MIB::hpnicfCBQoSMirrorIfCfgInfoEntry,,not-accessible,hpnicfCBQoSBehaviorIndex:hpnicfCBQoSMirrorIfMainIfIndex,current,,Flow mirroring to interface configuration information entry.
.1.3.6.1.4.1.11.2.14.11.15.2.65.2.1.2.20.1.1,HPN-ICF-CBQOS2-MIB::hpnicfCBQoSMirrorIfMainIfIndex,Integer32,not-accessible,,current,,IfIndex of mirror interface.
.1.3.6.1.4.1.11.2.14.11.15.2.65.2.1.2.20.1.2,HPN-ICF-CBQOS2-MIB::hpnicfCBQoSMirrorIfMainIfStatus,INTEGER,read-only,,current,inactive(1):active(2),Status of main interface.
.1.3.6.1.4.1.11.2.14.11.15.2.65.2.1.2.20.1.3,HPN-ICF-CBQOS2-MIB::hpnicfCBQoSMirrorIfBackupIfIndex,Integer32,read-create,,current,,IfIndex of backup mirror interface.
.1.3.6.1.4.1.11.2.14.11.15.2.65.2.1.2.20.1.4,HPN-ICF-CBQOS2-MIB::hpnicfCBQoSMirrorIfBackupIfStatus,INTEGER,read-only,,current,inactive(1):active(2),Status of backup interface.
.1.3.6.1.4.1.11.2.14.11.15.2.65.2.1.2.20.1.5,HPN-ICF-CBQOS2-MIB::hpnicfCBQoSMirrorIfRowStatus,INTEGER,read-create,,current,active(1):notInService(2):notReady(3):createAndGo(4):createAndWait(5):destroy(6),RowStatus.
.1.3.6.1.4.1.11.2.14.11.15.2.65.2.1.2.21,HPN-ICF-CBQOS2-MIB::hpnicfCBQoSColoredRemarkCfgTable,,not-accessible,,current,,A table of colored remarking feature configuration information.
.1.3.6.1.4.1.11.2.14.11.15.2.65.2.1.2.21.1,HPN-ICF-CBQOS2-MIB::hpnicfCBQoSColoredRemarkCfgEntry,,not-accessible,hpnicfCBQoSBehaviorIndex:hpnicfCBQoSColoredRemarkType:hpnicfCBQoSColoredRemarkColor,current,,Colored remarking configuration information entry.
.1.3.6.1.4.1.11.2.14.11.15.2.65.2.1.2.21.1.1,HPN-ICF-CBQOS2-MIB::hpnicfCBQoSColoredRemarkType,INTEGER,not-accessible,,current,typeIpPrecedence(1):typeDscp(2):typeMplsExp(3):typeVlan8021p(4):typeAtmClp(5):typeFrDe(6):typeVlanID(7):typeQosLocalID(8):typeDropPrecedence(9):typeLocalPrecedence(10):typeTopMostVlanID(11):typeSecondMplsExp(12),Remark type.
.1.3.6.1.4.1.11.2.14.11.15.2.65.2.1.2.21.1.2,HPN-ICF-CBQOS2-MIB::hpnicfCBQoSColoredRemarkColor,INTEGER,not-accessible,,current,green(1):yellow(2):red(3),Remark color.
.1.3.6.1.4.1.11.2.14.11.15.2.65.2.1.2.21.1.3,HPN-ICF-CBQOS2-MIB::hpnicfCBQoSColoredRemarkValue,Integer32,read-create,,current,,Value to remark: for IpPrecedence: 0~7 for Dscp: 0~63 for MplsExp: 0~7 for Vlan8021p: 0~7 for AtmClp: 0~1 for FrDe: 0~1 for VlanID: 1~4094 for QosLocalID: 1~4095 for DropPrecedence: 0~2 for LocalPrecedence: 0~7 for TopMostVlanID: 1~4094 for SecondMplsExp: 0~7 
.1.3.6.1.4.1.11.2.14.11.15.2.65.2.1.2.21.1.4,HPN-ICF-CBQOS2-MIB::hpnicfCBQoSColoredRemarkRowStatus,INTEGER,read-create,,current,active(1):notInService(2):notReady(3):createAndGo(4):createAndWait(5):destroy(6),RowStatus
.1.3.6.1.4.1.11.2.14.11.15.2.65.2.1.2.22,HPN-ICF-CBQOS2-MIB::hpnicfCBQoSPrimapCfgInfoTable,,not-accessible,,current,,A table of referencing priority map configuration information.
.1.3.6.1.4.1.11.2.14.11.15.2.65.2.1.2.22.1,HPN-ICF-CBQOS2-MIB::hpnicfCBQoSPrimapCfgInfoEntry,,not-accessible,hpnicfCBQoSBehaviorIndex:hpnicfCBQoSPrimapColorType:hpnicfCBQoSPrePriMapTableType,current,,Referencing priority map configuration information entry.
.1.3.6.1.4.1.11.2.14.11.15.2.65.2.1.2.22.1.1,HPN-ICF-CBQOS2-MIB::hpnicfCBQoSPrimapColorType,INTEGER,not-accessible,,current,noColorMap(1):colorMap(2),Color type of priority map.
.1.3.6.1.4.1.11.2.14.11.15.2.65.2.1.2.22.1.2,HPN-ICF-CBQOS2-MIB::hpnicfCBQoSPrePriMapTableType,INTEGER,not-accessible,,current,dot1pToLp(1):dot1pToDp(2):expToLp(3):dscpToLp(4):expToDp(5):dscpToDp(6):dscpToDot1p(7):dot1pToDscp(8):dscpToDscp(9):dscpToExp(10):expToDscp(11):expToDot1p(12):expToExp(13):lpToDot1p(14):dot1pToRpr(15):dscpToRpr(16):expToRpr(17):ippreToRpr(18):upToDot1p(19):upToDscp(20):upToExp(21):upToDp(22):upToLp(23):upToRpr(24):upToFc(25):lpTodscp(26):dot11eToLp(27):lpToDot11e(28):lpToLp(29):dot1pToExp(30):lpToExp(31):lpToDp(32):upToUp(33):dot1pToDot1p(34),The type of pre-defined priority mapping table.
.1.3.6.1.4.1.11.2.14.11.15.2.65.2.1.2.22.1.3,HPN-ICF-CBQOS2-MIB::hpnicfCBQoSPrimapRowStatus,INTEGER,read-create,,current,active(1):notInService(2):notReady(3):createAndGo(4):createAndWait(5):destroy(6),RowStatus
.1.3.6.1.4.1.11.2.14.11.15.2.65.2.1.2.23,HPN-ICF-CBQOS2-MIB::hpnicfCBQoSColorMapDpCfgInfoTable,,not-accessible,,current,,A table of referencing color-map-DP action configuration information.
.1.3.6.1.4.1.11.2.14.11.15.2.65.2.1.2.23.1,HPN-ICF-CBQOS2-MIB::hpnicfCBQoSColorMapDpCfgInfoEntry,,not-accessible,hpnicfCBQoSBehaviorIndex,current,,Referencing color-map-DP action configuration information entry.
.1.3.6.1.4.1.11.2.14.11.15.2.65.2.1.2.23.1.1,HPN-ICF-CBQOS2-MIB::hpnicfCBQoSColorMapDpEnable,INTEGER,read-create,,current,true(1):false(2),Color-map-DP enable status.
.1.3.6.1.4.1.11.2.14.11.15.2.65.2.1.2.23.1.2,HPN-ICF-CBQOS2-MIB::hpnicfCBQoSColorMapDpRowStatus,INTEGER,read-create,,current,active(1):notInService(2):notReady(3):createAndGo(4):createAndWait(5):destroy(6),RowStatus
.1.3.6.1.4.1.11.2.14.11.15.2.65.2.1.3,HPN-ICF-CBQOS2-MIB::hpnicfCBQoSPolicyObjects,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.2.65.2.1.3.1,HPN-ICF-CBQOS2-MIB::hpnicfCBQoSPolicyIndexNext,Integer32,read-only,,current,,This object contains an appropriate value to be used for hpnicfCBQoSPolicyIndex when creating rows in the hpnicfCBQoSPolicyCfgInfoTable.
.1.3.6.1.4.1.11.2.14.11.15.2.65.2.1.3.2,HPN-ICF-CBQOS2-MIB::hpnicfCBQoSPolicyCfgInfoTable,,not-accessible,,current,,A table of QoS policy configuration information.
.1.3.6.1.4.1.11.2.14.11.15.2.65.2.1.3.2.1,HPN-ICF-CBQOS2-MIB::hpnicfCBQoSPolicyCfgInfoEntry,,not-accessible,hpnicfCBQoSPolicyIndex,current,,Traffic policy configuration information entry.
.1.3.6.1.4.1.11.2.14.11.15.2.65.2.1.3.2.1.1,HPN-ICF-CBQOS2-MIB::hpnicfCBQoSPolicyIndex,Integer32,not-accessible,,current,,Index of Traffic Policy.
.1.3.6.1.4.1.11.2.14.11.15.2.65.2.1.3.2.1.2,HPN-ICF-CBQOS2-MIB::hpnicfCBQoSPolicyName,OCTET,read-create,,current,,Name of Traffic Policy.
.1.3.6.1.4.1.11.2.14.11.15.2.65.2.1.3.2.1.3,HPN-ICF-CBQOS2-MIB::hpnicfCBQoSPolicyClassCount,Integer32,read-only,,current,,The counter of policy classes of policy.
.1.3.6.1.4.1.11.2.14.11.15.2.65.2.1.3.2.1.4,HPN-ICF-CBQOS2-MIB::hpnicfCBQoSPolicyConfigMode,INTEGER,read-create,,current,unavailable(0):config(1):auto(2),Configuration mode of Traffic Policy. Only hardware QoS support this node. 'unavailable' is returned only when getting value from software QoS. 'unavailable' can't be set.
.1.3.6.1.4.1.11.2.14.11.15.2.65.2.1.3.2.1.5,HPN-ICF-CBQOS2-MIB::hpnicfCBQoSPolicyType,INTEGER,read-only,,current,systemDefined(1):userDefined(2),Type of policy.
.1.3.6.1.4.1.11.2.14.11.15.2.65.2.1.3.2.1.6,HPN-ICF-CBQOS2-MIB::hpnicfCBQoSPolicyClassNextIndex,Integer32,read-only,,current,,This object contains an appropriate value to be used for hpnicfCBQoSPolicyClassIndex when creating rows in the hpnicfCBQoSPolicyClassCfgInfoTable. 
.1.3.6.1.4.1.11.2.14.11.15.2.65.2.1.3.2.1.7,HPN-ICF-CBQOS2-MIB::hpnicfCBQoSPolicyRowStatus,INTEGER,read-create,,current,active(1):notInService(2):notReady(3):createAndGo(4):createAndWait(5):destroy(6),RowStatus.
.1.3.6.1.4.1.11.2.14.11.15.2.65.2.1.3.3,HPN-ICF-CBQOS2-MIB::hpnicfCBQoSPolicyClassCfgInfoTable,,not-accessible,,current,,A table of QoS Policy classifier-behavior configuration information.
.1.3.6.1.4.1.11.2.14.11.15.2.65.2.1.3.3.1,HPN-ICF-CBQOS2-MIB::hpnicfCBQoSPolicyClassCfgInfoEntry,,not-accessible,hpnicfCBQoSPolicyIndex:hpnicfCBQoSPolicyClassIndex,current,,Traffic policy classifier-behavior configuration information entry.
.1.3.6.1.4.1.11.2.14.11.15.2.65.2.1.3.3.1.1,HPN-ICF-CBQOS2-MIB::hpnicfCBQoSPolicyClassIndex,Integer32,not-accessible,,current,,PolicyClass Index in a QoS policy.
.1.3.6.1.4.1.11.2.14.11.15.2.65.2.1.3.3.1.2,HPN-ICF-CBQOS2-MIB::hpnicfCBQoSPolicyClassClassifierIndex,Integer32,read-create,,current,,Index of classifier applied by a policy. It should exist in hpnicfCBQoSClassifierCfgInfoTable.
.1.3.6.1.4.1.11.2.14.11.15.2.65.2.1.3.3.1.3,HPN-ICF-CBQOS2-MIB::hpnicfCBQoSPolicyClassClassifierName,OCTET,read-only,,current,,Name of classifier applied by a policy. It is corresponding to hpnicfCBQoSPolicyClassClassifierIndex.
.1.3.6.1.4.1.11.2.14.11.15.2.65.2.1.3.3.1.4,HPN-ICF-CBQOS2-MIB::hpnicfCBQoSPolicyClassBehaviorIndex,Integer32,read-create,,current,,Index of Behavior applied by a policy. It should exist in hpnicfCBQoSBehaviorCfgInfoTable.
.1.3.6.1.4.1.11.2.14.11.15.2.65.2.1.3.3.1.5,HPN-ICF-CBQOS2-MIB::hpnicfCBQoSPolicyClassBehaviorName,OCTET,read-only,,current,,Name of Behavior applied by a policy. It is corresponding to hpnicfCBQoSPolicyClassBehaviorIndex.
.1.3.6.1.4.1.11.2.14.11.15.2.65.2.1.3.3.1.6,HPN-ICF-CBQOS2-MIB::hpnicfCBQoSPolicyClassPrecedence,Integer32,read-create,,current,,The Precedence of the class in the policy. Only hardware QoS support this node. 2147483647 is returned only when getting value from software QoS. 2147483647 can't be set.
.1.3.6.1.4.1.11.2.14.11.15.2.65.2.1.3.3.1.7,HPN-ICF-CBQOS2-MIB::hpnicfCBQoSPolicyClassRowStatus,INTEGER,read-create,,current,active(1):notInService(2):notReady(3):createAndGo(4):createAndWait(5):destroy(6),RowStatus.
.1.3.6.1.4.1.11.2.14.11.15.2.65.2.1.3.3.1.8,HPN-ICF-CBQOS2-MIB::hpnicfCBQoSPolicyClassMode,INTEGER,read-create,,current,modeNo(1):modeDot1q(2):modeQppb(3):modeIpSourceGuard(4):modeVoiceVlan(5):modeDCBX(6),Set the mode of the classifier-behavior association. The default mode modeNo is a normal mode. modeDot1q indicates that the association is used for VLAN mapping. modeQppb indicates that the association is used for BGP routing policy. modeIpSourceGuard indicates that the association is used for packets undergo IP source guard. modeVoiceVlan indicates that the association is used for voice data packets. modeDCBX indicates that the association is used for DCBX. 
.1.3.6.1.4.1.11.2.14.11.15.2.65.2.1.3.3.1.9,HPN-ICF-CBQOS2-MIB::hpnicfCBQoSPolicyClassCfgOrder,Integer32,read-only,,current,,A QoS policy contains multiple classifier-behavior associations. A node indicates the configuration order of the corresponding classifier-behavior association.
.1.3.6.1.4.1.11.2.14.11.15.2.65.2.1.4,HPN-ICF-CBQOS2-MIB::hpnicfCBQoSApplyPolicyObjects,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.2.65.2.1.4.1,HPN-ICF-CBQOS2-MIB::hpnicfCBQoSIfApplyPolicyTable,,not-accessible,,current,,A table of QoS policy instance.
.1.3.6.1.4.1.11.2.14.11.15.2.65.2.1.4.1.1,HPN-ICF-CBQOS2-MIB::hpnicfCBQoSIfApplyPolicyEntry,,not-accessible,hpnicfCBQoSIfApplyPolicyIfIndex:hpnicfCBQoSIfApplyPolicyDirection,current,,Policy applied on interface Configuration Information Entry.
.1.3.6.1.4.1.11.2.14.11.15.2.65.2.1.4.1.1.1,HPN-ICF-CBQOS2-MIB::hpnicfCBQoSIfApplyPolicyIfIndex,Integer32,accessible-for-notify,,current,,Interface Index, equal to ifIndex.
.1.3.6.1.4.1.11.2.14.11.15.2.65.2.1.4.1.1.2,HPN-ICF-CBQOS2-MIB::hpnicfCBQoSIfApplyPolicyDirection,INTEGER,accessible-for-notify,,current,inbound(1):outbound(2),Policy direction: inbound (1) outbound (2) 
.1.3.6.1.4.1.11.2.14.11.15.2.65.2.1.4.1.1.3,HPN-ICF-CBQOS2-MIB::hpnicfCBQoSIfApplyPolicyName,OCTET,read-create,,current,,Name of Traffic Policy.
.1.3.6.1.4.1.11.2.14.11.15.2.65.2.1.4.1.1.4,HPN-ICF-CBQOS2-MIB::hpnicfCBQoSIfApplyPolicyEnableDynamic,INTEGER,read-create,,current,unavailable(1):true(2):false(3),If the value of it is specified 'true',Enable dynamic qos policy. 'unavailable' is returned if device don't support dynamic QoS. 'unavailable' can't be set. 
.1.3.6.1.4.1.11.2.14.11.15.2.65.2.1.4.1.1.5,HPN-ICF-CBQOS2-MIB::hpnicfCBQoSIfApplyPolicyRowStatus,INTEGER,read-create,,current,active(1):notInService(2):notReady(3):createAndGo(4):createAndWait(5):destroy(6),RowStatus.
.1.3.6.1.4.1.11.2.14.11.15.2.65.2.1.4.1.1.6,HPN-ICF-CBQOS2-MIB::hpnicfCBQoSIfApplyPolicyStatus,INTEGER,read-only,,current,proccessing(1):success(2):partialItemFailed(3),Status of policy applied on interface.
.1.3.6.1.4.1.11.2.14.11.15.2.65.2.1.4.2,HPN-ICF-CBQOS2-MIB::hpnicfCBQoSAtmPvcApplyPolicyTable,,not-accessible,,current,,A table of QoS policy instance.
.1.3.6.1.4.1.11.2.14.11.15.2.65.2.1.4.2.1,HPN-ICF-CBQOS2-MIB::hpnicfCBQoSAtmPvcApplyPolicyEntry,,not-accessible,hpnicfCBQoSAtmPvcApplyPolicyIfIndex:hpnicfCBQoSAtmPvcApplyPolicyVPI:hpnicfCBQoSAtmPvcApplyPolicyVCI:hpnicfCBQoSAtmPvcApplyPolicyDirection,current,,Policy applied on ATM PVC Configuration Information Entry.
.1.3.6.1.4.1.11.2.14.11.15.2.65.2.1.4.2.1.1,HPN-ICF-CBQOS2-MIB::hpnicfCBQoSAtmPvcApplyPolicyIfIndex,Integer32,not-accessible,,current,,ATM Interface Index, equal to ifIndex.
.1.3.6.1.4.1.11.2.14.11.15.2.65.2.1.4.2.1.2,HPN-ICF-CBQOS2-MIB::hpnicfCBQoSAtmPvcApplyPolicyVPI,Integer32,not-accessible,,current,,VPI value of ATM Interface.
.1.3.6.1.4.1.11.2.14.11.15.2.65.2.1.4.2.1.3,HPN-ICF-CBQOS2-MIB::hpnicfCBQoSAtmPvcApplyPolicyVCI,Integer32,not-accessible,,current,,VCI value of ATM Interface.
.1.3.6.1.4.1.11.2.14.11.15.2.65.2.1.4.2.1.4,HPN-ICF-CBQOS2-MIB::hpnicfCBQoSAtmPvcApplyPolicyDirection,INTEGER,not-accessible,,current,inbound(1):outbound(2),Policy direction: inbound (1) outbound (2)
.1.3.6.1.4.1.11.2.14.11.15.2.65.2.1.4.2.1.5,HPN-ICF-CBQOS2-MIB::hpnicfCBQoSAtmPvcApplyPolicyName,OCTET,read-create,,current,,Name of Traffic Policy.
.1.3.6.1.4.1.11.2.14.11.15.2.65.2.1.4.2.1.6,HPN-ICF-CBQOS2-MIB::hpnicfCBQoSAtmPvcApplyPolicyRowStatus,INTEGER,read-create,,current,active(1):notInService(2):notReady(3):createAndGo(4):createAndWait(5):destroy(6),RowStatus
.1.3.6.1.4.1.11.2.14.11.15.2.65.2.1.4.3,HPN-ICF-CBQOS2-MIB::hpnicfCBQoSVlanApplyPolicyTable,,not-accessible,,current,,A table of QoS policy instance.
.1.3.6.1.4.1.11.2.14.11.15.2.65.2.1.4.3.1,HPN-ICF-CBQOS2-MIB::hpnicfCBQoSVlanApplyPolicyEntry,,not-accessible,hpnicfCBQoSVlanApplyPolicyVlanid:hpnicfCBQoSVlanApplyPolicyDirection,current,,Policy applied on Ethernet VLAN Configuration Information Entry.
.1.3.6.1.4.1.11.2.14.11.15.2.65.2.1.4.3.1.1,HPN-ICF-CBQOS2-MIB::hpnicfCBQoSVlanApplyPolicyVlanid,Integer32,accessible-for-notify,,current,,Vlan of Ethernet Interface.
.1.3.6.1.4.1.11.2.14.11.15.2.65.2.1.4.3.1.2,HPN-ICF-CBQOS2-MIB::hpnicfCBQoSVlanApplyPolicyDirection,INTEGER,accessible-for-notify,,current,inbound(1):outbound(2),Policy direction: inbound (1) outbound (2)
.1.3.6.1.4.1.11.2.14.11.15.2.65.2.1.4.3.1.3,HPN-ICF-CBQOS2-MIB::hpnicfCBQoSVlanApplyPolicyName,OCTET,read-create,,current,,Name of Traffic Policy.
.1.3.6.1.4.1.11.2.14.11.15.2.65.2.1.4.3.1.4,HPN-ICF-CBQOS2-MIB::hpnicfCBQoSVlanApplyPriority,Integer32,read-create,,current,,The priority of policy.
.1.3.6.1.4.1.11.2.14.11.15.2.65.2.1.4.3.1.5,HPN-ICF-CBQOS2-MIB::hpnicfCBQoSVlanApplyPolicyRowStatus,INTEGER,read-create,,current,active(1):notInService(2):notReady(3):createAndGo(4):createAndWait(5):destroy(6),RowStatus.
.1.3.6.1.4.1.11.2.14.11.15.2.65.2.1.4.3.1.6,HPN-ICF-CBQOS2-MIB::hpnicfCBQoSVlanApplyPolicyStatus,INTEGER,read-only,,current,proccessing(1):success(2):partialItemFailed(3),Status of policy applied on VLAN.
.1.3.6.1.4.1.11.2.14.11.15.2.65.2.1.4.4,HPN-ICF-CBQOS2-MIB::hpnicfCBQoSFrClassApplyPolicyTable,,not-accessible,,current,,A table of QoS policy instance.
.1.3.6.1.4.1.11.2.14.11.15.2.65.2.1.4.4.1,HPN-ICF-CBQOS2-MIB::hpnicfCBQoSFrClassApplyPolicyEntry,,not-accessible,hpnicfCBQoSFrClassApplyPolicyFrClassName:hpnicfCBQoSFrClassApplyPolicyDirection,current,,Policy applied on FR class Configuration Information Entry.
.1.3.6.1.4.1.11.2.14.11.15.2.65.2.1.4.4.1.1,HPN-ICF-CBQOS2-MIB::hpnicfCBQoSFrClassApplyPolicyFrClassName,OCTET,not-accessible,,current,,The name of FR class.
.1.3.6.1.4.1.11.2.14.11.15.2.65.2.1.4.4.1.2,HPN-ICF-CBQOS2-MIB::hpnicfCBQoSFrClassApplyPolicyDirection,INTEGER,not-accessible,,current,inbound(1):outbound(2),Policy direction: inbound (1) outbound (2)
.1.3.6.1.4.1.11.2.14.11.15.2.65.2.1.4.4.1.3,HPN-ICF-CBQOS2-MIB::hpnicfCBQoSFrClassApplyPolicyName,OCTET,read-create,,current,,Name of Traffic Policy.
.1.3.6.1.4.1.11.2.14.11.15.2.65.2.1.4.4.1.4,HPN-ICF-CBQOS2-MIB::hpnicfCBQoSFrClassApplyPolicyRowStatus,INTEGER,read-create,,current,active(1):notInService(2):notReady(3):createAndGo(4):createAndWait(5):destroy(6),RowStatus.
.1.3.6.1.4.1.11.2.14.11.15.2.65.2.1.4.5,HPN-ICF-CBQOS2-MIB::hpnicfCBQoSFrPvcApplyPolicyTable,,not-accessible,,current,,A table of QoS policy instance.
.1.3.6.1.4.1.11.2.14.11.15.2.65.2.1.4.5.1,HPN-ICF-CBQOS2-MIB::hpnicfCBQoSFrPvcApplyPolicyEntry,,not-accessible,hpnicfCBQoSFrPvcApplyPolicyIfIndex:hpnicfCBQoSFrPvcApplyPolicyDlciNum:hpnicfCBQoSFrPvcApplyPolicyDirection,current,,Policy applied on FR PVC Configuration Information Entry.
.1.3.6.1.4.1.11.2.14.11.15.2.65.2.1.4.5.1.1,HPN-ICF-CBQOS2-MIB::hpnicfCBQoSFrPvcApplyPolicyIfIndex,Integer32,not-accessible,,current,,Fr Interface Index, equal to ifIndex.
.1.3.6.1.4.1.11.2.14.11.15.2.65.2.1.4.5.1.2,HPN-ICF-CBQOS2-MIB::hpnicfCBQoSFrPvcApplyPolicyDlciNum,Integer32,not-accessible,,current,,Fr DLCI number.
.1.3.6.1.4.1.11.2.14.11.15.2.65.2.1.4.5.1.3,HPN-ICF-CBQOS2-MIB::hpnicfCBQoSFrPvcApplyPolicyDirection,INTEGER,not-accessible,,current,inbound(1):outbound(2),Policy direction: inbound (1) outbound (2)
.1.3.6.1.4.1.11.2.14.11.15.2.65.2.1.4.5.1.4,HPN-ICF-CBQOS2-MIB::hpnicfCBQoSFrPvcApplyPolicyName,OCTET,read-only,,current,,Name of Traffic Policy.
.1.3.6.1.4.1.11.2.14.11.15.2.65.2.1.4.5.1.5,HPN-ICF-CBQOS2-MIB::hpnicfCBQoSFrPvcApplyPolicyRowStatus,INTEGER,read-only,,current,active(1):notInService(2):notReady(3):createAndGo(4):createAndWait(5):destroy(6),RowStatus.
.1.3.6.1.4.1.11.2.14.11.15.2.65.2.1.4.6,HPN-ICF-CBQOS2-MIB::hpnicfCBQoSGlobalApplyTable,,not-accessible,,current,,A table of QoS policies applied globally. A QoS policy applied globally takes effect on all ports of the device.
.1.3.6.1.4.1.11.2.14.11.15.2.65.2.1.4.6.1,HPN-ICF-CBQOS2-MIB::hpnicfCBQoSGlobalApplyEntry,,not-accessible,hpnicfCBQoSGlobalApplyDirection,current,,A global policy entry.
.1.3.6.1.4.1.11.2.14.11.15.2.65.2.1.4.6.1.1,HPN-ICF-CBQOS2-MIB::hpnicfCBQoSGlobalApplyDirection,INTEGER,not-accessible,,current,inbound(1):outbound(2),Policy direction: inbound (1) outbound (2)
.1.3.6.1.4.1.11.2.14.11.15.2.65.2.1.4.6.1.2,HPN-ICF-CBQOS2-MIB::hpnicfCBQoSGlobalApplyName,OCTET,read-create,,current,,Name of a global policy.
.1.3.6.1.4.1.11.2.14.11.15.2.65.2.1.4.6.1.3,HPN-ICF-CBQOS2-MIB::hpnicfCBQoSGlobalApplyRowStatus,INTEGER,read-create,,current,active(1):notInService(2):notReady(3):createAndGo(4):createAndWait(5):destroy(6),RowStatus.
.1.3.6.1.4.1.11.2.14.11.15.2.65.2.1.4.6.1.4,HPN-ICF-CBQOS2-MIB::hpnicfCBQoSGlobalApplyStatus,INTEGER,read-only,,current,proccessing(1):success(2):partialItemFailed(3),Status of policy applied globally.
.1.3.6.1.4.1.11.2.14.11.15.2.65.2.1.4.7,HPN-ICF-CBQOS2-MIB::hpnicfCBQoSCpApplyPolicyTable,,not-accessible,,current,,A table of QoS policies applied on control plane.
.1.3.6.1.4.1.11.2.14.11.15.2.65.2.1.4.7.1,HPN-ICF-CBQOS2-MIB::hpnicfCBQoSCpApplyPolicyEntry,,not-accessible,hpnicfCBQoSCpApplyPolicyChassis:hpnicfCBQoSCpApplyPolicySlot:hpnicfCBQoSCpApplyPolicyDirection,current,,Policy applied on control plane configuration information entry.
.1.3.6.1.4.1.11.2.14.11.15.2.65.2.1.4.7.1.1,HPN-ICF-CBQOS2-MIB::hpnicfCBQoSCpApplyPolicyChassis,Unsigned32,not-accessible,,current,,Chassis number.
.1.3.6.1.4.1.11.2.14.11.15.2.65.2.1.4.7.1.2,HPN-ICF-CBQOS2-MIB::hpnicfCBQoSCpApplyPolicySlot,Unsigned32,not-accessible,,current,,Slot number.
.1.3.6.1.4.1.11.2.14.11.15.2.65.2.1.4.7.1.3,HPN-ICF-CBQOS2-MIB::hpnicfCBQoSCpApplyPolicyDirection,INTEGER,not-accessible,,current,inbound(1):outbound(2),Policy direction: inbound (1) outbound (2)
.1.3.6.1.4.1.11.2.14.11.15.2.65.2.1.4.7.1.4,HPN-ICF-CBQOS2-MIB::hpnicfCBQoSCpApplyPolicyName,OCTET,read-create,,current,,Name of traffic policy.
.1.3.6.1.4.1.11.2.14.11.15.2.65.2.1.4.7.1.5,HPN-ICF-CBQOS2-MIB::hpnicfCBQoSCpApplyPolicyStatus,INTEGER,read-only,,current,proccessing(1):success(2):partialItemFailed(3),Status of policy applied on control plane.
.1.3.6.1.4.1.11.2.14.11.15.2.65.2.1.4.7.1.6,HPN-ICF-CBQOS2-MIB::hpnicfCBQoSCpApplyRowStatus,INTEGER,read-create,,current,active(1):notInService(2):notReady(3):createAndGo(4):createAndWait(5):destroy(6),RowStatus.
.1.3.6.1.4.1.11.2.14.11.15.2.65.2.1.5,HPN-ICF-CBQOS2-MIB::hpnicfCBQoSApplyPolicyStaticsObjects,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.2.65.2.1.5.1,HPN-ICF-CBQOS2-MIB::hpnicfCBQoSIfStaticsObjects,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.2.65.2.1.5.1.1,HPN-ICF-CBQOS2-MIB::hpnicfCBQoSIfCbqRunInfoTable,,not-accessible,,current,,A table of interface CBQ Running statistics. When policy using queue behavior is applied on interface the interface will using Class Based Queuing.
.1.3.6.1.4.1.11.2.14.11.15.2.65.2.1.5.1.1.1,HPN-ICF-CBQOS2-MIB::hpnicfCBQoSIfCbqRunInfoEntry,,not-accessible,hpnicfCBQoSIfApplyPolicyIfIndex,current,,Interface CBQ statistics entry.
.1.3.6.1.4.1.11.2.14.11.15.2.65.2.1.5.1.1.1.1,HPN-ICF-CBQOS2-MIB::hpnicfCBQoSIfCbqQueueSize,Integer32,read-only,,current,,Packet number of CBQ queue
.1.3.6.1.4.1.11.2.14.11.15.2.65.2.1.5.1.1.1.2,HPN-ICF-CBQOS2-MIB::hpnicfCBQoSIfCbqDiscard,Counter64,read-only,,current,,The number of discarded packets which couldn't be enqueued.
.1.3.6.1.4.1.11.2.14.11.15.2.65.2.1.5.1.1.1.3,HPN-ICF-CBQOS2-MIB::hpnicfCBQoSIfCbqEfQueueSize,Integer32,read-only,,current,,Packet number of EF queue.
.1.3.6.1.4.1.11.2.14.11.15.2.65.2.1.5.1.1.1.4,HPN-ICF-CBQOS2-MIB::hpnicfCBQoSIfCbqAfQueueSize,Integer32,read-only,,current,,Packet number of AF queue.
.1.3.6.1.4.1.11.2.14.11.15.2.65.2.1.5.1.1.1.5,HPN-ICF-CBQOS2-MIB::hpnicfCBQoSIfCbqBeQueueSize,Integer32,read-only,,current,,Packet number of BE queue.
.1.3.6.1.4.1.11.2.14.11.15.2.65.2.1.5.1.1.1.6,HPN-ICF-CBQOS2-MIB::hpnicfCBQoSIfCbqBeActiveQueueNum,Integer32,read-only,,current,,The Packet number of Active BE Queue.
.1.3.6.1.4.1.11.2.14.11.15.2.65.2.1.5.1.1.1.7,HPN-ICF-CBQOS2-MIB::hpnicfCBQoSIfCbqBeMaxActiveQueueNum,Integer32,read-only,,current,,The max Packet number of Active BE Queue.
.1.3.6.1.4.1.11.2.14.11.15.2.65.2.1.5.1.1.1.8,HPN-ICF-CBQOS2-MIB::hpnicfCBQoSIfCbqBeTotalQueueNum,Integer32,read-only,,current,,The total Packet number of BE Queue.
.1.3.6.1.4.1.11.2.14.11.15.2.65.2.1.5.1.1.1.9,HPN-ICF-CBQOS2-MIB::hpnicfCBQoSIfCbqAfAllocatedQueueNum,Integer32,read-only,,current,,The Allocated Packet number of AF Queue.
.1.3.6.1.4.1.11.2.14.11.15.2.65.2.1.5.1.2,HPN-ICF-CBQOS2-MIB::hpnicfCBQoSIfClassMatchRunInfoTable,,not-accessible,,current,,A table of Running statistics for matching a classifier in a QoS policy applied on the interface.
.1.3.6.1.4.1.11.2.14.11.15.2.65.2.1.5.1.2.1,HPN-ICF-CBQOS2-MIB::hpnicfCBQoSIfClassMatchRunInfoEntry,,not-accessible,hpnicfCBQoSIfApplyPolicyIfIndex:hpnicfCBQoSIfApplyPolicyDirection:hpnicfCBQoSPolicyClassIndex,current,,Classifier's matching statistics information entry.
.1.3.6.1.4.1.11.2.14.11.15.2.65.2.1.5.1.2.1.1,HPN-ICF-CBQOS2-MIB::hpnicfCBQoSIfClassMatchedPackets,Counter64,read-only,,current,,Number of packets matching a class in a QoS policy.
.1.3.6.1.4.1.11.2.14.11.15.2.65.2.1.5.1.2.1.2,HPN-ICF-CBQOS2-MIB::hpnicfCBQoSIfClassMatchedBytes,Counter64,read-only,,current,,Number of bytes matching a class in a QoS policy. Only software QoS support this node.
.1.3.6.1.4.1.11.2.14.11.15.2.65.2.1.5.1.2.1.3,HPN-ICF-CBQOS2-MIB::hpnicfCBQoSIfClassAverageRate,Counter64,read-only,,current,,Average rate matching a class of the last 5 minutes.
.1.3.6.1.4.1.11.2.14.11.15.2.65.2.1.5.1.3,HPN-ICF-CBQOS2-MIB::hpnicfCBQoSIfCarRunInfoTable,,not-accessible,,current,,A table of Running statistics for CAR in a QoS policy applied on the interface.
.1.3.6.1.4.1.11.2.14.11.15.2.65.2.1.5.1.3.1,HPN-ICF-CBQOS2-MIB::hpnicfCBQoSIfCarRunInfoEntry,,not-accessible,hpnicfCBQoSIfApplyPolicyIfIndex:hpnicfCBQoSIfApplyPolicyDirection:hpnicfCBQoSPolicyClassIndex,current,,CAR statistics information entry.
.1.3.6.1.4.1.11.2.14.11.15.2.65.2.1.5.1.3.1.1,HPN-ICF-CBQOS2-MIB::hpnicfCBQoSIfCarGreenPackets,Counter64,read-only,,current,,Number of green packets.
.1.3.6.1.4.1.11.2.14.11.15.2.65.2.1.5.1.3.1.2,HPN-ICF-CBQOS2-MIB::hpnicfCBQoSIfCarGreenBytes,Counter64,read-only,,current,,Number of green bytes.
.1.3.6.1.4.1.11.2.14.11.15.2.65.2.1.5.1.3.1.3,HPN-ICF-CBQOS2-MIB::hpnicfCBQoSIfCarRedPackets,Counter64,read-only,,current,,Number of red packets.
.1.3.6.1.4.1.11.2.14.11.15.2.65.2.1.5.1.3.1.4,HPN-ICF-CBQOS2-MIB::hpnicfCBQoSIfCarRedBytes,Counter64,read-only,,current,,Number of red bytes.
.1.3.6.1.4.1.11.2.14.11.15.2.65.2.1.5.1.3.1.5,HPN-ICF-CBQOS2-MIB::hpnicfCBQoSIfCarYellowPackets,Counter64,read-only,,current,,Number of yellow packets.
.1.3.6.1.4.1.11.2.14.11.15.2.65.2.1.5.1.3.1.6,HPN-ICF-CBQOS2-MIB::hpnicfCBQoSIfCarYellowBytes,Counter64,read-only,,current,,Number of yellow bytes.
.1.3.6.1.4.1.11.2.14.11.15.2.65.2.1.5.1.4,HPN-ICF-CBQOS2-MIB::hpnicfCBQoSIfGtsRunInfoTable,,not-accessible,,current,,A table of Running statistics for GTS in a QoS policy applied on the interface.
.1.3.6.1.4.1.11.2.14.11.15.2.65.2.1.5.1.4.1,HPN-ICF-CBQOS2-MIB::hpnicfCBQoSIfGtsRunInfoEntry,,not-accessible,hpnicfCBQoSIfApplyPolicyIfIndex:hpnicfCBQoSIfApplyPolicyDirection:hpnicfCBQoSPolicyClassIndex,current,,GTS statistics entry.
.1.3.6.1.4.1.11.2.14.11.15.2.65.2.1.5.1.4.1.1,HPN-ICF-CBQOS2-MIB::hpnicfCBQoSIfGtsPassedPackets,Counter64,read-only,,current,,Number of packets passed by GTS.
.1.3.6.1.4.1.11.2.14.11.15.2.65.2.1.5.1.4.1.2,HPN-ICF-CBQOS2-MIB::hpnicfCBQoSIfGtsPassedBytes,Counter64,read-only,,current,,Number of bytes passed by GTS.
.1.3.6.1.4.1.11.2.14.11.15.2.65.2.1.5.1.4.1.3,HPN-ICF-CBQOS2-MIB::hpnicfCBQoSIfGtsDiscardedPackets,Counter64,read-only,,current,,Number of packets discarded by GTS.
.1.3.6.1.4.1.11.2.14.11.15.2.65.2.1.5.1.4.1.4,HPN-ICF-CBQOS2-MIB::hpnicfCBQoSIfGtsDiscardedBytes,Counter64,read-only,,current,,Number of bytes discarded by GTS.
.1.3.6.1.4.1.11.2.14.11.15.2.65.2.1.5.1.4.1.5,HPN-ICF-CBQOS2-MIB::hpnicfCBQoSIfGtsDelayedPackets,Counter64,read-only,,current,,Number of packets delayed by GTS.
.1.3.6.1.4.1.11.2.14.11.15.2.65.2.1.5.1.4.1.6,HPN-ICF-CBQOS2-MIB::hpnicfCBQoSIfGtsDelayedBytes,Counter64,read-only,,current,,Number of bytes delayed by GTS.
.1.3.6.1.4.1.11.2.14.11.15.2.65.2.1.5.1.4.1.7,HPN-ICF-CBQOS2-MIB::hpnicfCBQoSIfGtsQueueSize,Integer32,read-only,,current,,Packet number of GTS queue.
.1.3.6.1.4.1.11.2.14.11.15.2.65.2.1.5.1.5,HPN-ICF-CBQOS2-MIB::hpnicfCBQoSIfRemarkRunInfoTable,,not-accessible,,current,,A table of Running statistics for remarking in a QoS policy applied on the interface.
.1.3.6.1.4.1.11.2.14.11.15.2.65.2.1.5.1.5.1,HPN-ICF-CBQOS2-MIB::hpnicfCBQoSIfRemarkRunInfoEntry,,not-accessible,hpnicfCBQoSIfApplyPolicyIfIndex:hpnicfCBQoSIfApplyPolicyDirection:hpnicfCBQoSPolicyClassIndex,current,,Remarking statistics entry.
.1.3.6.1.4.1.11.2.14.11.15.2.65.2.1.5.1.5.1.1,HPN-ICF-CBQOS2-MIB::hpnicfCBQoSIfRemarkedPackets,Counter64,read-only,,current,,Number of packets remarked.
.1.3.6.1.4.1.11.2.14.11.15.2.65.2.1.5.1.6,HPN-ICF-CBQOS2-MIB::hpnicfCBQoSIfQueueRunInfoTable,,not-accessible,,current,,A table of Running statistics for queue in a QoS policy applied on the interface.
.1.3.6.1.4.1.11.2.14.11.15.2.65.2.1.5.1.6.1,HPN-ICF-CBQOS2-MIB::hpnicfCBQoSIfQueueRunInfoEntry,,not-accessible,hpnicfCBQoSIfApplyPolicyIfIndex:hpnicfCBQoSIfApplyPolicyDirection:hpnicfCBQoSPolicyClassIndex,current,,Queue statistics entry.
.1.3.6.1.4.1.11.2.14.11.15.2.65.2.1.5.1.6.1.1,HPN-ICF-CBQOS2-MIB::hpnicfCBQoSIfQueueMatchedPackets,Counter64,read-only,,current,,Number of packets matched to enqueue.
.1.3.6.1.4.1.11.2.14.11.15.2.65.2.1.5.1.6.1.2,HPN-ICF-CBQOS2-MIB::hpnicfCBQoSIfQueueMatchedBytes,Counter64,read-only,,current,,Number of bytes matched to enqueue.
.1.3.6.1.4.1.11.2.14.11.15.2.65.2.1.5.1.6.1.3,HPN-ICF-CBQOS2-MIB::hpnicfCBQoSIfQueueEnqueuedPackets,Counter64,read-only,,current,,Number of packets enqueued.
.1.3.6.1.4.1.11.2.14.11.15.2.65.2.1.5.1.6.1.4,HPN-ICF-CBQOS2-MIB::hpnicfCBQoSIfQueueEnqueuedBytes,Counter64,read-only,,current,,Number of bytes enqueued.
.1.3.6.1.4.1.11.2.14.11.15.2.65.2.1.5.1.6.1.5,HPN-ICF-CBQOS2-MIB::hpnicfCBQoSIfQueueDiscardedPackets,Counter64,read-only,,current,,Number of packets discarded when enqueued by discard method.
.1.3.6.1.4.1.11.2.14.11.15.2.65.2.1.5.1.6.1.6,HPN-ICF-CBQOS2-MIB::hpnicfCBQoSIfQueueDiscardedBytes,Counter64,read-only,,current,,Number of bytes discarded when enqueued by discard method.
.1.3.6.1.4.1.11.2.14.11.15.2.65.2.1.5.1.7,HPN-ICF-CBQOS2-MIB::hpnicfCBQoSIfWredRunInfoTable,,not-accessible,,current,,A table of Running statistics for WRED in a QoS policy applied on the interface.
.1.3.6.1.4.1.11.2.14.11.15.2.65.2.1.5.1.7.1,HPN-ICF-CBQOS2-MIB::hpnicfCBQoSIfWredRunInfoEntry,,not-accessible,hpnicfCBQoSIfApplyPolicyIfIndex:hpnicfCBQoSIfApplyPolicyDirection:hpnicfCBQoSPolicyClassIndex:hpnicfCBQoSWredClassValue,current,,WRED statistics entry.
.1.3.6.1.4.1.11.2.14.11.15.2.65.2.1.5.1.7.1.1,HPN-ICF-CBQOS2-MIB::hpnicfCBQoSIfWredRandomDiscardedPackets,Counter64,read-only,,current,,Number of packets that random-discarded by WRED.
.1.3.6.1.4.1.11.2.14.11.15.2.65.2.1.5.1.7.1.2,HPN-ICF-CBQOS2-MIB::hpnicfCBQoSIfWredTailDiscardedPackets,Counter64,read-only,,current,,Number of packets that tail-discarded by WRED.
.1.3.6.1.4.1.11.2.14.11.15.2.65.2.1.5.1.8,HPN-ICF-CBQOS2-MIB::hpnicfCBQoSIfAccountingRunInfoTable,,not-accessible,,current,,A table of Running statistics for account in a QoS policy applied on the interface.
.1.3.6.1.4.1.11.2.14.11.15.2.65.2.1.5.1.8.1,HPN-ICF-CBQOS2-MIB::hpnicfCBQoSIfAccountingRunInfoEntry,,not-accessible,hpnicfCBQoSIfApplyPolicyIfIndex:hpnicfCBQoSIfApplyPolicyDirection:hpnicfCBQoSPolicyClassIndex,current,,Account statistics entry.
.1.3.6.1.4.1.11.2.14.11.15.2.65.2.1.5.1.8.1.1,HPN-ICF-CBQOS2-MIB::hpnicfCBQoSIfAccountingPackets,Counter64,read-only,,current,,Number of packets.
.1.3.6.1.4.1.11.2.14.11.15.2.65.2.1.5.1.8.1.2,HPN-ICF-CBQOS2-MIB::hpnicfCBQoSIfAccountingBytes,Counter64,read-only,,current,,Number of bytes.
.1.3.6.1.4.1.11.2.14.11.15.2.65.2.1.5.2,HPN-ICF-CBQOS2-MIB::hpnicfCBQoSAtmPvcStaticsObjects,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.2.65.2.1.5.2.1,HPN-ICF-CBQOS2-MIB::hpnicfCBQoSAtmPvcCbqRunInfoTable,,not-accessible,,current,,A table of ATM PVC CBQ Running statistics. When policy using queue behavior is applied on ATM PVC. ATM PVC will using Class Based Queuing.
.1.3.6.1.4.1.11.2.14.11.15.2.65.2.1.5.2.1.1,HPN-ICF-CBQOS2-MIB::hpnicfCBQoSAtmPvcCbqRunInfoEntry,,not-accessible,hpnicfCBQoSAtmPvcApplyPolicyIfIndex:hpnicfCBQoSAtmPvcApplyPolicyVPI:hpnicfCBQoSAtmPvcApplyPolicyVCI,current,,FR PVC CBQ statistics entry.
.1.3.6.1.4.1.11.2.14.11.15.2.65.2.1.5.2.1.1.1,HPN-ICF-CBQOS2-MIB::hpnicfCBQoSAtmPvcCbqQueueSize,Integer32,read-only,,current,,Packet number of CBQ queue.
.1.3.6.1.4.1.11.2.14.11.15.2.65.2.1.5.2.1.1.2,HPN-ICF-CBQOS2-MIB::hpnicfCBQoSAtmPvcCbqDiscard,Counter64,read-only,,current,,The number of discarded packets which couldn't be enqueued.
.1.3.6.1.4.1.11.2.14.11.15.2.65.2.1.5.2.1.1.3,HPN-ICF-CBQOS2-MIB::hpnicfCBQoSAtmPvcCbqEfQueueSize,Integer32,read-only,,current,,Packet number of EF queue.
.1.3.6.1.4.1.11.2.14.11.15.2.65.2.1.5.2.1.1.4,HPN-ICF-CBQOS2-MIB::hpnicfCBQoSAtmPvcCbqAfQueueSize,Integer32,read-only,,current,,Packet number of AF queue.
.1.3.6.1.4.1.11.2.14.11.15.2.65.2.1.5.2.1.1.5,HPN-ICF-CBQOS2-MIB::hpnicfCBQoSAtmPvcCbqBeQueueSize,Integer32,read-only,,current,,Packet number of BE queue.
.1.3.6.1.4.1.11.2.14.11.15.2.65.2.1.5.2.1.1.6,HPN-ICF-CBQOS2-MIB::hpnicfCBQoSAtmPvcCbqBeActiveQueueNum,Integer32,read-only,,current,,The packet number of Active Be Queue.
.1.3.6.1.4.1.11.2.14.11.15.2.65.2.1.5.2.1.1.7,HPN-ICF-CBQOS2-MIB::hpnicfCBQoSAtmPvcCbqBeMaxActiveQueueNum,Integer32,read-only,,current,,The max packet number of Active Be Queue.
.1.3.6.1.4.1.11.2.14.11.15.2.65.2.1.5.2.1.1.8,HPN-ICF-CBQOS2-MIB::hpnicfCBQoSAtmPvcCbqBeTotalQueueNum,Integer32,read-only,,current,,The total packet number of Be Queue.
.1.3.6.1.4.1.11.2.14.11.15.2.65.2.1.5.2.1.1.9,HPN-ICF-CBQOS2-MIB::hpnicfCBQoSAtmPvcCbqAfAllocatedQueueNum,Integer32,read-only,,current,,The Allocated packet number of AF Queue.
.1.3.6.1.4.1.11.2.14.11.15.2.65.2.1.5.2.2,HPN-ICF-CBQOS2-MIB::hpnicfCBQoSAtmPvcClassMatchRunInfoTable,,not-accessible,,current,,A table of Running statistics for matching a classifier in a QoS policy applied on ATM PVC.
.1.3.6.1.4.1.11.2.14.11.15.2.65.2.1.5.2.2.1,HPN-ICF-CBQOS2-MIB::hpnicfCBQoSAtmPvcClassMatchRunInfoEntry,,not-accessible,hpnicfCBQoSAtmPvcApplyPolicyIfIndex:hpnicfCBQoSAtmPvcApplyPolicyVPI:hpnicfCBQoSAtmPvcApplyPolicyVCI:hpnicfCBQoSAtmPvcApplyPolicyDirection:hpnicfCBQoSPolicyClassIndex,current,,Classifier matching statistics entry.
.1.3.6.1.4.1.11.2.14.11.15.2.65.2.1.5.2.2.1.1,HPN-ICF-CBQOS2-MIB::hpnicfCBQoSAtmPvcClassMatchPackets,Counter64,read-only,,current,,Number of packets matching a class in a QoS policy.
.1.3.6.1.4.1.11.2.14.11.15.2.65.2.1.5.2.2.1.2,HPN-ICF-CBQOS2-MIB::hpnicfCBQoSAtmPvcClassMatchBytes,Counter64,read-only,,current,,Number of bytes matching a class in a QoS policy.
.1.3.6.1.4.1.11.2.14.11.15.2.65.2.1.5.2.2.1.3,HPN-ICF-CBQOS2-MIB::hpnicfCBQoSAtmPvcClassAverageRate,Integer32,read-only,,current,,Average rate matching a class in the last 5 minutes.
.1.3.6.1.4.1.11.2.14.11.15.2.65.2.1.5.2.3,HPN-ICF-CBQOS2-MIB::hpnicfCBQoSAtmPvcCarRunInfoTable,,not-accessible,,current,,A table of Running statistics for CAR in a QoS policy applied on ATM PVC.
.1.3.6.1.4.1.11.2.14.11.15.2.65.2.1.5.2.3.1,HPN-ICF-CBQOS2-MIB::hpnicfCBQoSAtmPvcCarRunInfoEntry,,not-accessible,hpnicfCBQoSAtmPvcApplyPolicyIfIndex:hpnicfCBQoSAtmPvcApplyPolicyVPI:hpnicfCBQoSAtmPvcApplyPolicyVCI:hpnicfCBQoSAtmPvcApplyPolicyDirection:hpnicfCBQoSPolicyClassIndex,current,,CAR statistics entry.
.1.3.6.1.4.1.11.2.14.11.15.2.65.2.1.5.2.3.1.1,HPN-ICF-CBQOS2-MIB::hpnicfCBQoSAtmPvcCarConformPackets,Counter64,read-only,,current,,Number of packets that conforming specified CIR.
.1.3.6.1.4.1.11.2.14.11.15.2.65.2.1.5.2.3.1.2,HPN-ICF-CBQOS2-MIB::hpnicfCBQoSAtmPvcCarConformBytes,Counter64,read-only,,current,,Number of bytes that conforming specified CIR.
.1.3.6.1.4.1.11.2.14.11.15.2.65.2.1.5.2.3.1.3,HPN-ICF-CBQOS2-MIB::hpnicfCBQoSAtmPvcCarExceedPackets,Counter64,read-only,,current,,Number of packets exceeded CIR.
.1.3.6.1.4.1.11.2.14.11.15.2.65.2.1.5.2.3.1.4,HPN-ICF-CBQOS2-MIB::hpnicfCBQoSAtmPvcCarExceedBytes,Counter64,read-only,,current,,Number of bytes exceeded CIR.
.1.3.6.1.4.1.11.2.14.11.15.2.65.2.1.5.2.4,HPN-ICF-CBQOS2-MIB::hpnicfCBQoSAtmPvcGtsRunInfoTable,,not-accessible,,current,,A table of Running statistics for GTS in a QoS policy applied on ATM PVC.
.1.3.6.1.4.1.11.2.14.11.15.2.65.2.1.5.2.4.1,HPN-ICF-CBQOS2-MIB::hpnicfCBQoSAtmPvcGtsRunInfoEntry,,not-accessible,hpnicfCBQoSAtmPvcApplyPolicyIfIndex:hpnicfCBQoSAtmPvcApplyPolicyVPI:hpnicfCBQoSAtmPvcApplyPolicyVCI:hpnicfCBQoSAtmPvcApplyPolicyDirection:hpnicfCBQoSPolicyClassIndex,current,,GTS statistics entry.
.1.3.6.1.4.1.11.2.14.11.15.2.65.2.1.5.2.4.1.1,HPN-ICF-CBQOS2-MIB::hpnicfCBQoSAtmPvcGtsPassedPackets,Counter64,read-only,,current,,Number of packets passed by GTS.
.1.3.6.1.4.1.11.2.14.11.15.2.65.2.1.5.2.4.1.2,HPN-ICF-CBQOS2-MIB::hpnicfCBQoSAtmPvcGtsPassedBytes,Counter64,read-only,,current,,Number of bytes passed by GTS.
.1.3.6.1.4.1.11.2.14.11.15.2.65.2.1.5.2.4.1.3,HPN-ICF-CBQOS2-MIB::hpnicfCBQoSAtmPvcGtsDiscardedPackets,Counter64,read-only,,current,,Number of packets discarded by GTS.
.1.3.6.1.4.1.11.2.14.11.15.2.65.2.1.5.2.4.1.4,HPN-ICF-CBQOS2-MIB::hpnicfCBQoSAtmPvcGtsDiscardedBytes,Counter64,read-only,,current,,Number of bytes discarded by GTS.
.1.3.6.1.4.1.11.2.14.11.15.2.65.2.1.5.2.4.1.5,HPN-ICF-CBQOS2-MIB::hpnicfCBQoSAtmPvcGtsDelayedPackets,Counter64,read-only,,current,,Number of packets delayed by GTS.
.1.3.6.1.4.1.11.2.14.11.15.2.65.2.1.5.2.4.1.6,HPN-ICF-CBQOS2-MIB::hpnicfCBQoSAtmPvcGtsDelayedBytes,Counter64,read-only,,current,,Number of bytes delayed by GTS.
.1.3.6.1.4.1.11.2.14.11.15.2.65.2.1.5.2.4.1.7,HPN-ICF-CBQOS2-MIB::hpnicfCBQoSAtmPvcGtsQueueSize,Integer32,read-only,,current,,packet number of GTS queue.
.1.3.6.1.4.1.11.2.14.11.15.2.65.2.1.5.2.5,HPN-ICF-CBQOS2-MIB::hpnicfCBQoSAtmPvcRemarkRunInfoTable,,not-accessible,,current,,A table of Running statistics for remarking in a QoS policy applied on ATM PVC.
.1.3.6.1.4.1.11.2.14.11.15.2.65.2.1.5.2.5.1,HPN-ICF-CBQOS2-MIB::hpnicfCBQoSAtmPvcRemarkRunInfoEntry,,not-accessible,hpnicfCBQoSAtmPvcApplyPolicyIfIndex:hpnicfCBQoSAtmPvcApplyPolicyVPI:hpnicfCBQoSAtmPvcApplyPolicyVCI:hpnicfCBQoSAtmPvcApplyPolicyDirection:hpnicfCBQoSPolicyClassIndex,current,,Remarking statistics entry.
.1.3.6.1.4.1.11.2.14.11.15.2.65.2.1.5.2.5.1.1,HPN-ICF-CBQOS2-MIB::hpnicfCBQoSAtmPvcRemarkedPackets,Counter64,read-only,,current,,Number of packets remarked.
.1.3.6.1.4.1.11.2.14.11.15.2.65.2.1.5.2.6,HPN-ICF-CBQOS2-MIB::hpnicfCBQoSAtmPvcQueueRunInfoTable,,not-accessible,,current,,A table of Running statistics for queue in a QoS policy applied on ATM PVC.
.1.3.6.1.4.1.11.2.14.11.15.2.65.2.1.5.2.6.1,HPN-ICF-CBQOS2-MIB::hpnicfCBQoSAtmPvcQueueRunInfoEntry,,not-accessible,hpnicfCBQoSAtmPvcApplyPolicyIfIndex:hpnicfCBQoSAtmPvcApplyPolicyVPI:hpnicfCBQoSAtmPvcApplyPolicyVCI:hpnicfCBQoSAtmPvcApplyPolicyDirection:hpnicfCBQoSPolicyClassIndex,current,,Queue statistics entry.
.1.3.6.1.4.1.11.2.14.11.15.2.65.2.1.5.2.6.1.1,HPN-ICF-CBQOS2-MIB::hpnicfCBQoSAtmPvcQueueMatchedPackets,Counter64,read-only,,current,,Number of packets matched to enqueue.
.1.3.6.1.4.1.11.2.14.11.15.2.65.2.1.5.2.6.1.2,HPN-ICF-CBQOS2-MIB::hpnicfCBQoSAtmPvcQueueMatchedBytes,Counter64,read-only,,current,,Number of bytes matched to enqueue.
.1.3.6.1.4.1.11.2.14.11.15.2.65.2.1.5.2.6.1.3,HPN-ICF-CBQOS2-MIB::hpnicfCBQoSAtmPvcQueueEnqueuedPackets,Counter64,read-only,,current,,Number of packets enqueued.
.1.3.6.1.4.1.11.2.14.11.15.2.65.2.1.5.2.6.1.4,HPN-ICF-CBQOS2-MIB::hpnicfCBQoSAtmPvcQueueEnqueuedBytes,Counter64,read-only,,current,,Number of bytes enqueued.
.1.3.6.1.4.1.11.2.14.11.15.2.65.2.1.5.2.6.1.5,HPN-ICF-CBQOS2-MIB::hpnicfCBQoSAtmPvcQueueDiscardedPackets,Counter64,read-only,,current,,Number of packets discard when enqueued by discard method.
.1.3.6.1.4.1.11.2.14.11.15.2.65.2.1.5.2.6.1.6,HPN-ICF-CBQOS2-MIB::hpnicfCBQoSAtmPvcQueueDiscardedBytes,Counter64,read-only,,current,,Number of bytes discard when enqueued by discard method.
.1.3.6.1.4.1.11.2.14.11.15.2.65.2.1.5.2.7,HPN-ICF-CBQOS2-MIB::hpnicfCBQoSAtmPvcWredRunInfoTable,,not-accessible,,current,,A table of Running statistics for WRED in a QoS policy applied on ATM PVC.
.1.3.6.1.4.1.11.2.14.11.15.2.65.2.1.5.2.7.1,HPN-ICF-CBQOS2-MIB::hpnicfCBQoSAtmPvcWredRunInfoEntry,,not-accessible,hpnicfCBQoSAtmPvcApplyPolicyIfIndex:hpnicfCBQoSAtmPvcApplyPolicyVPI:hpnicfCBQoSAtmPvcApplyPolicyVCI:hpnicfCBQoSAtmPvcApplyPolicyDirection:hpnicfCBQoSPolicyClassIndex:hpnicfCBQoSWredClassValue,current,,WRED statistics entry.
.1.3.6.1.4.1.11.2.14.11.15.2.65.2.1.5.2.7.1.1,HPN-ICF-CBQOS2-MIB::hpnicfCBQoSAtmPvcWredRandomDiscardedPackets,Counter64,read-only,,current,,Number of packets randomly discarded by WRED.
.1.3.6.1.4.1.11.2.14.11.15.2.65.2.1.5.2.7.1.2,HPN-ICF-CBQOS2-MIB::hpnicfCBQoSAtmPvcWredTailDiscardedPackets,Counter64,read-only,,current,,Number of packets tail-discarded by WRED.
.1.3.6.1.4.1.11.2.14.11.15.2.65.2.1.5.2.8,HPN-ICF-CBQOS2-MIB::hpnicfCBQoSAtmPvcAccountingRunInfoTable,,not-accessible,,current,,A table of Running statistics for account in a QoS policy applied on the ATM PVC.
.1.3.6.1.4.1.11.2.14.11.15.2.65.2.1.5.2.8.1,HPN-ICF-CBQOS2-MIB::hpnicfCBQoSAtmPvcAccountingRunInfoEntry,,not-accessible,hpnicfCBQoSAtmPvcApplyPolicyIfIndex:hpnicfCBQoSAtmPvcApplyPolicyVPI:hpnicfCBQoSAtmPvcApplyPolicyVCI:hpnicfCBQoSAtmPvcApplyPolicyDirection:hpnicfCBQoSPolicyClassIndex:hpnicfCBQoSWredClassValue,current,,Account statistics entry.
.1.3.6.1.4.1.11.2.14.11.15.2.65.2.1.5.2.8.1.1,HPN-ICF-CBQOS2-MIB::hpnicfCBQoSAtmPvcAccountingPackets,Counter64,read-only,,current,,Number of packets.
.1.3.6.1.4.1.11.2.14.11.15.2.65.2.1.5.2.8.1.2,HPN-ICF-CBQOS2-MIB::hpnicfCBQoSAtmPvcAccountingBytes,Counter64,read-only,,current,,Number of bytes.
.1.3.6.1.4.1.11.2.14.11.15.2.65.2.1.5.3,HPN-ICF-CBQOS2-MIB::hpnicfCBQoSFrPvcStaticsObjects,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.2.65.2.1.5.3.1,HPN-ICF-CBQOS2-MIB::hpnicfCBQoSFrPvcCbqRunInfoTable,,not-accessible,,current,,A table of FR PVC CBQ Running statistics. When policy using queue behavior is applied on FR PVC will using Class Based Queuing.
.1.3.6.1.4.1.11.2.14.11.15.2.65.2.1.5.3.1.1,HPN-ICF-CBQOS2-MIB::hpnicfCBQoSFrPvcCbqRunInfoEntry,,not-accessible,hpnicfCBQoSFrPvcApplyPolicyIfIndex:hpnicfCBQoSFrPvcApplyPolicyDlciNum,current,,FR PVC CBQ statistics entry.
.1.3.6.1.4.1.11.2.14.11.15.2.65.2.1.5.3.1.1.1,HPN-ICF-CBQOS2-MIB::hpnicfCBQoSFrPvcCbqQueueSize,Integer32,read-only,,current,,Packet number of CBQ queue.
.1.3.6.1.4.1.11.2.14.11.15.2.65.2.1.5.3.1.1.2,HPN-ICF-CBQOS2-MIB::hpnicfCBQoSFrPvcCbqDiscard,Counter64,read-only,,current,,The number of discarded packets which could not be enqueued.
.1.3.6.1.4.1.11.2.14.11.15.2.65.2.1.5.3.1.1.3,HPN-ICF-CBQOS2-MIB::hpnicfCBQoSFrPvcCbqEfQueueSize,Integer32,read-only,,current,,Packet number of EF queue.
.1.3.6.1.4.1.11.2.14.11.15.2.65.2.1.5.3.1.1.4,HPN-ICF-CBQOS2-MIB::hpnicfCBQoSFrPvcCbqAfQueueSize,Integer32,read-only,,current,,Packet number of AF queue.
.1.3.6.1.4.1.11.2.14.11.15.2.65.2.1.5.3.1.1.5,HPN-ICF-CBQOS2-MIB::hpnicfCBQoSFrPvcCbqBeQueueSize,Integer32,read-only,,current,,Packet number of BE queue.
.1.3.6.1.4.1.11.2.14.11.15.2.65.2.1.5.3.1.1.6,HPN-ICF-CBQOS2-MIB::hpnicfCBQoSFrPvcCbqBeActiveQueueNum,Integer32,read-only,,current,,The packet number of Active Be Queue.
.1.3.6.1.4.1.11.2.14.11.15.2.65.2.1.5.3.1.1.7,HPN-ICF-CBQOS2-MIB::hpnicfCBQoSFrPvcCbqBeMaxActiveQueueNum,Integer32,read-only,,current,,The max packet number of Active Be Queue.
.1.3.6.1.4.1.11.2.14.11.15.2.65.2.1.5.3.1.1.8,HPN-ICF-CBQOS2-MIB::hpnicfCBQoSFrPvcCbqBeTotalQueueNum,Integer32,read-only,,current,,The total packet number of Be Queue.
.1.3.6.1.4.1.11.2.14.11.15.2.65.2.1.5.3.1.1.9,HPN-ICF-CBQOS2-MIB::hpnicfCBQoSFrPvcCbqAfAllocatedQueueNum,Integer32,read-only,,current,,The Allocated packet number of AF Queue.
.1.3.6.1.4.1.11.2.14.11.15.2.65.2.1.5.3.2,HPN-ICF-CBQOS2-MIB::hpnicfCBQoSFrPvcClassMatchRunInfoTable,,not-accessible,,current,,A table of Running statistics for matching a classifier in a QoS policy applied on FR PVC.
.1.3.6.1.4.1.11.2.14.11.15.2.65.2.1.5.3.2.1,HPN-ICF-CBQOS2-MIB::hpnicfCBQoSFrPvcClassMatchRunInfoEntry,,not-accessible,hpnicfCBQoSFrPvcApplyPolicyIfIndex:hpnicfCBQoSFrPvcApplyPolicyDlciNum:hpnicfCBQoSFrPvcApplyPolicyDirection:hpnicfCBQoSPolicyClassIndex,current,,Classifier matching statistics entry.
.1.3.6.1.4.1.11.2.14.11.15.2.65.2.1.5.3.2.1.1,HPN-ICF-CBQOS2-MIB::hpnicfCBQoSFrPvcClassMatchedPackets,Counter64,read-only,,current,,Number of packets matching a class in a QoS policy.
.1.3.6.1.4.1.11.2.14.11.15.2.65.2.1.5.3.2.1.2,HPN-ICF-CBQOS2-MIB::hpnicfCBQoSFrPvcClassMatchedBytes,Counter64,read-only,,current,,Number of bytes matching a class in a QoS policy.
.1.3.6.1.4.1.11.2.14.11.15.2.65.2.1.5.3.2.1.3,HPN-ICF-CBQOS2-MIB::hpnicfCBQoSFrPvcClassAverageRate,Counter64,read-only,,current,,Average rate matching a class of the last 5 minutes.
.1.3.6.1.4.1.11.2.14.11.15.2.65.2.1.5.3.3,HPN-ICF-CBQOS2-MIB::hpnicfCBQoSFrPvcCarRunInfoTable,,not-accessible,,current,,A table of Running statistics for CAR in a QoS policy applied on FR PVC.
.1.3.6.1.4.1.11.2.14.11.15.2.65.2.1.5.3.3.1,HPN-ICF-CBQOS2-MIB::hpnicfCBQoSFrPvcCarRunInfoEntry,,not-accessible,hpnicfCBQoSFrPvcApplyPolicyIfIndex:hpnicfCBQoSFrPvcApplyPolicyDlciNum:hpnicfCBQoSFrPvcApplyPolicyDirection:hpnicfCBQoSPolicyClassIndex,current,,CAR statistics entry.
.1.3.6.1.4.1.11.2.14.11.15.2.65.2.1.5.3.3.1.1,HPN-ICF-CBQOS2-MIB::hpnicfCBQoSFrPvcCarConformPackets,Counter64,read-only,,current,,Number of packets conform CIR.
.1.3.6.1.4.1.11.2.14.11.15.2.65.2.1.5.3.3.1.2,HPN-ICF-CBQOS2-MIB::hpnicfCBQoSFrPvcCarConformBytes,Counter64,read-only,,current,,Number of bytes conform CIR.
.1.3.6.1.4.1.11.2.14.11.15.2.65.2.1.5.3.3.1.3,HPN-ICF-CBQOS2-MIB::hpnicfCBQoSFrPvcCarExceedPackets,Counter64,read-only,,current,,Number of packets exceed CIR.
.1.3.6.1.4.1.11.2.14.11.15.2.65.2.1.5.3.3.1.4,HPN-ICF-CBQOS2-MIB::hpnicfCBQoSFrPvcCarExceedBytes,Counter64,read-only,,current,,Number of bytes exceed CIR.
.1.3.6.1.4.1.11.2.14.11.15.2.65.2.1.5.3.4,HPN-ICF-CBQOS2-MIB::hpnicfCBQoSFrPvcGtsRunInfoTable,,not-accessible,,current,,A table of Running statistics for GTS in a QoS policy applied on FR PVC.
.1.3.6.1.4.1.11.2.14.11.15.2.65.2.1.5.3.4.1,HPN-ICF-CBQOS2-MIB::hpnicfCBQoSFrPvcGtsRunInfoEntry,,not-accessible,hpnicfCBQoSFrPvcApplyPolicyIfIndex:hpnicfCBQoSFrPvcApplyPolicyDlciNum:hpnicfCBQoSFrPvcApplyPolicyDirection:hpnicfCBQoSPolicyClassIndex,current,,GTS statistics entry.
.1.3.6.1.4.1.11.2.14.11.15.2.65.2.1.5.3.4.1.1,HPN-ICF-CBQOS2-MIB::hpnicfCBQoSFrPvcGtsPassedPackets,Counter64,read-only,,current,,Number of packets passed by GTS.
.1.3.6.1.4.1.11.2.14.11.15.2.65.2.1.5.3.4.1.2,HPN-ICF-CBQOS2-MIB::hpnicfCBQoSFrPvcGtsPassedBytes,Counter64,read-only,,current,,Number of bytes passed by GTS.
.1.3.6.1.4.1.11.2.14.11.15.2.65.2.1.5.3.4.1.3,HPN-ICF-CBQOS2-MIB::hpnicfCBQoSFrPvcGtsDiscardedPackets,Counter64,read-only,,current,,Number of packets discarded by GTS.
.1.3.6.1.4.1.11.2.14.11.15.2.65.2.1.5.3.4.1.4,HPN-ICF-CBQOS2-MIB::hpnicfCBQoSFrPvcGtsDiscardedBytes,Counter64,read-only,,current,,Number of bytes discarded by GTS.
.1.3.6.1.4.1.11.2.14.11.15.2.65.2.1.5.3.4.1.5,HPN-ICF-CBQOS2-MIB::hpnicfCBQoSFrPvcGtsDelayedPackets,Counter64,read-only,,current,,Number of packets delayed by GTS.
.1.3.6.1.4.1.11.2.14.11.15.2.65.2.1.5.3.4.1.6,HPN-ICF-CBQOS2-MIB::hpnicfCBQoSFrPvcGtsDelayedBytes,Counter64,read-only,,current,,Number of bytes delayed by GTS.
.1.3.6.1.4.1.11.2.14.11.15.2.65.2.1.5.3.4.1.7,HPN-ICF-CBQOS2-MIB::hpnicfCBQoSFrPvcGtsQueueSize,Integer32,read-only,,current,,Packet number of GTS queue.
.1.3.6.1.4.1.11.2.14.11.15.2.65.2.1.5.3.5,HPN-ICF-CBQOS2-MIB::hpnicfCBQoSFrPvcRemarkRunInfoTable,,not-accessible,,current,,A table of Running statistics for remarking in a QoS policy applied on FR PVC.
.1.3.6.1.4.1.11.2.14.11.15.2.65.2.1.5.3.5.1,HPN-ICF-CBQOS2-MIB::hpnicfCBQoSFrPvcRemarkRunInfoEntry,,not-accessible,hpnicfCBQoSFrPvcApplyPolicyIfIndex:hpnicfCBQoSFrPvcApplyPolicyDlciNum:hpnicfCBQoSFrPvcApplyPolicyDirection:hpnicfCBQoSPolicyClassIndex,current,,Remarking statistics entry.
.1.3.6.1.4.1.11.2.14.11.15.2.65.2.1.5.3.5.1.1,HPN-ICF-CBQOS2-MIB::hpnicfCBQoSFrPvcRemarkedPackets,Counter64,read-only,,current,,Number of packets remarked.
.1.3.6.1.4.1.11.2.14.11.15.2.65.2.1.5.3.6,HPN-ICF-CBQOS2-MIB::hpnicfCBQoSFrPvcQueueRunInfoTable,,not-accessible,,current,,A table of Running statistics for queue in a QoS policy applied on FR PVC.
.1.3.6.1.4.1.11.2.14.11.15.2.65.2.1.5.3.6.1,HPN-ICF-CBQOS2-MIB::hpnicfCBQoSFrPvcQueueRunInfoEntry,,not-accessible,hpnicfCBQoSFrPvcApplyPolicyIfIndex:hpnicfCBQoSFrPvcApplyPolicyDlciNum:hpnicfCBQoSFrPvcApplyPolicyDirection:hpnicfCBQoSPolicyClassIndex,current,,Queue statistics entry.
.1.3.6.1.4.1.11.2.14.11.15.2.65.2.1.5.3.6.1.1,HPN-ICF-CBQOS2-MIB::hpnicfCBQoSFrPvcQueueMatchedPackets,Counter64,read-only,,current,,Number of packets matched to enqueue.
.1.3.6.1.4.1.11.2.14.11.15.2.65.2.1.5.3.6.1.2,HPN-ICF-CBQOS2-MIB::hpnicfCBQoSFrPvcQueueMatchedBytes,Counter64,read-only,,current,,Number of bytes matched to en-queue.
.1.3.6.1.4.1.11.2.14.11.15.2.65.2.1.5.3.6.1.3,HPN-ICF-CBQOS2-MIB::hpnicfCBQoSFrPvcQueueEnqueuedPackets,Counter64,read-only,,current,,Number of packets en-queued.
.1.3.6.1.4.1.11.2.14.11.15.2.65.2.1.5.3.6.1.4,HPN-ICF-CBQOS2-MIB::hpnicfCBQoSFrPvcQueueEnqueuedBytes,Counter64,read-only,,current,,Number of bytes enqueued.
.1.3.6.1.4.1.11.2.14.11.15.2.65.2.1.5.3.6.1.5,HPN-ICF-CBQOS2-MIB::hpnicfCBQoSFrPvcQueueDiscardedPackets,Counter64,read-only,,current,,Number of packets discarded when enqueued by discard method.
.1.3.6.1.4.1.11.2.14.11.15.2.65.2.1.5.3.6.1.6,HPN-ICF-CBQOS2-MIB::hpnicfCBQoSFrPvcQueueDiscardedBytes,Counter64,read-only,,current,,Number of bytes discarded when enqueued by discard method.
.1.3.6.1.4.1.11.2.14.11.15.2.65.2.1.5.3.7,HPN-ICF-CBQOS2-MIB::hpnicfCBQoSFrPvcWredRunInfoTable,,not-accessible,,current,,A table of Running statistics for WRED in a QoS policy applied on FR PVC. 
.1.3.6.1.4.1.11.2.14.11.15.2.65.2.1.5.3.7.1,HPN-ICF-CBQOS2-MIB::hpnicfCBQoSFrPvcWredRunInfoEntry,,not-accessible,hpnicfCBQoSFrPvcApplyPolicyIfIndex:hpnicfCBQoSFrPvcApplyPolicyDlciNum:hpnicfCBQoSFrPvcApplyPolicyDirection:hpnicfCBQoSPolicyClassIndex:hpnicfCBQoSWredClassValue,current,,WRED statistics entry.
.1.3.6.1.4.1.11.2.14.11.15.2.65.2.1.5.3.7.1.1,HPN-ICF-CBQOS2-MIB::hpnicfCBQoSFrPvcWredRandomDiscardedPackets,Counter64,read-only,,current,,Number of packets randomly discarded by WRED.
.1.3.6.1.4.1.11.2.14.11.15.2.65.2.1.5.3.7.1.2,HPN-ICF-CBQOS2-MIB::hpnicfCBQoSFrPvcWredTailDiscardedPackets,Counter64,read-only,,current,,Number of packets tail-discarded by WRED.
.1.3.6.1.4.1.11.2.14.11.15.2.65.2.1.5.3.8,HPN-ICF-CBQOS2-MIB::hpnicfCBQoSFrPvcAccountingRunInfoTable,,not-accessible,,current,,A table of Running statistics for account in a QoS policy applied on the interface.
.1.3.6.1.4.1.11.2.14.11.15.2.65.2.1.5.3.8.1,HPN-ICF-CBQOS2-MIB::hpnicfCBQoSFrPvcAccountingRunInfoEntry,,not-accessible,hpnicfCBQoSFrPvcApplyPolicyIfIndex:hpnicfCBQoSFrPvcApplyPolicyDlciNum:hpnicfCBQoSFrPvcApplyPolicyDirection:hpnicfCBQoSPolicyClassIndex:hpnicfCBQoSWredClassValue,current,,Account statistics entry.
.1.3.6.1.4.1.11.2.14.11.15.2.65.2.1.5.3.8.1.1,HPN-ICF-CBQOS2-MIB::hpnicfCBQoSFrPvcAccountingPackets,Counter64,read-only,,current,,Number of packets.
.1.3.6.1.4.1.11.2.14.11.15.2.65.2.1.5.3.8.1.2,HPN-ICF-CBQOS2-MIB::hpnicfCBQoSFrPvcAccountingBytes,Counter64,read-only,,current,,Number of bytes.
.1.3.6.1.4.1.11.2.14.11.15.2.65.2.1.5.4,HPN-ICF-CBQOS2-MIB::hpnicfCBQoSVlanStaticsObjects,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.2.65.2.1.5.4.1,HPN-ICF-CBQOS2-MIB::hpnicfCBQoSVlanClassMatchRunInfoTable,,not-accessible,,current,,A table of Running statistics for matching a classifier in a QoS policy applied on Ethernet VLAN. 
.1.3.6.1.4.1.11.2.14.11.15.2.65.2.1.5.4.1.1,HPN-ICF-CBQOS2-MIB::hpnicfCBQoSVlanClassMatchRunInfoEntry,,not-accessible,hpnicfCBQoSVlanApplyPolicyVlanid:hpnicfCBQoSVlanApplyPolicyDirection:hpnicfCBQoSPolicyClassIndex,current,,Classifier matching statistics entry.
.1.3.6.1.4.1.11.2.14.11.15.2.65.2.1.5.4.1.1.1,HPN-ICF-CBQOS2-MIB::hpnicfCBQoSVlanClassMatchedPackets,Counter64,read-only,,current,,Number of packets matching a class in a QoS policy.
.1.3.6.1.4.1.11.2.14.11.15.2.65.2.1.5.4.2,HPN-ICF-CBQOS2-MIB::hpnicfCBQoSVlanAccountingRunInfoTable,,not-accessible,,current,,A table of Running statistics for account in a QoS policy applied on the interface.
.1.3.6.1.4.1.11.2.14.11.15.2.65.2.1.5.4.2.1,HPN-ICF-CBQOS2-MIB::hpnicfCBQoSVlanAccountingRunInfoEntry,,not-accessible,hpnicfCBQoSVlanApplyPolicyVlanid:hpnicfCBQoSVlanApplyPolicyDirection:hpnicfCBQoSPolicyClassIndex,current,,Account statistics entry.
.1.3.6.1.4.1.11.2.14.11.15.2.65.2.1.5.4.2.1.1,HPN-ICF-CBQOS2-MIB::hpnicfCBQoSVlanAccountingPackets,Counter64,read-only,,current,,Number of packets.
.1.3.6.1.4.1.11.2.14.11.15.2.65.2.1.5.4.2.1.2,HPN-ICF-CBQOS2-MIB::hpnicfCBQoSVlanAccountingBytes,Counter64,read-only,,current,,Number of bytes.
.1.3.6.1.4.1.11.2.14.11.15.2.65.2.1.5.5,HPN-ICF-CBQOS2-MIB::hpnicfCBQoSApplyPolicyIndexObjects,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.2.65.2.1.5.5.1,HPN-ICF-CBQOS2-MIB::hpnicfCBQoSApplyObjectTable,,not-accessible,,current,,A table of QoS apply object index. It provides the function of querying the information of QoS apply object, which consists of interface type, interface index, ATM PVC, FR DLCI and nesting policy index, using QoS apply object index.
.1.3.6.1.4.1.11.2.14.11.15.2.65.2.1.5.5.1.1,HPN-ICF-CBQOS2-MIB::hpnicfCBQoSApplyObjectEntry,,not-accessible,hpnicfCBQoSApplyObjectIndex,current,,QoS apply object index entry.
.1.3.6.1.4.1.11.2.14.11.15.2.65.2.1.5.5.1.1.1,HPN-ICF-CBQOS2-MIB::hpnicfCBQoSApplyObjectIndex,Unsigned32,not-accessible,,current,,QoS apply object index. It represents the unique identifier of QoS policy applied position. It generates when QoS policy is applied considering ifIndex, VLAN ID, ATM PVC, FR DLCI and policy nesting.
.1.3.6.1.4.1.11.2.14.11.15.2.65.2.1.5.5.1.1.2,HPN-ICF-CBQOS2-MIB::hpnicfCBQoSApplyObjectType,INTEGER,read-only,,current,interface(1):vlan(2):atmPvc(3):frDlci(4):controlPlane(5),Apply object type.
.1.3.6.1.4.1.11.2.14.11.15.2.65.2.1.5.5.1.1.3,HPN-ICF-CBQOS2-MIB::hpnicfCBQoSApplyObjectDirection,INTEGER,read-only,,current,inbound(1):outbound(2),The direction of QoS apply object.
.1.3.6.1.4.1.11.2.14.11.15.2.65.2.1.5.5.1.1.4,HPN-ICF-CBQOS2-MIB::hpnicfCBQoSApplyObjectMainSite,Unsigned32,read-only,,current,,Its value depends on hpnicfCBQoSApplyObjectType. It represents VLAN ID when hpnicfCBQoSApplyObjectType is vlan, and represents chassis ID when hpnicfCBQoSApplyObjectType is controlPlane, otherwise it represents ifIndex.
.1.3.6.1.4.1.11.2.14.11.15.2.65.2.1.5.5.1.1.5,HPN-ICF-CBQOS2-MIB::hpnicfCBQoSApplyObjectSubChannel,Unsigned32,read-only,,current,,Its value depends on hpnicfCBQoSApplyObjectType. It represents the value of VPI/VCI, of which high 16-bits is VPI and low 16-bits is VCI, when hpnicfCBQoSApplyObjectType is atmPvc. It represents the value of data link connection identifier in FR network, when hpnicfCBQoSApplyObjectType is frDlci. It represents slot ID, when hpnicfCBQoSApplyObjectType is controlPlane. Otherwise the value is '0xFFFFFFFF'.
.1.3.6.1.4.1.11.2.14.11.15.2.65.2.1.5.5.1.1.6,HPN-ICF-CBQOS2-MIB::hpnicfCBQoSApplyObjectSubClass,Unsigned32,read-only,,current,,The value represents level-1 sub class index when the QoS apply object is level-2 or level-3 nesting policy. Otherwise the value is '0xFFFFFFFF'.
.1.3.6.1.4.1.11.2.14.11.15.2.65.2.1.5.5.1.1.7,HPN-ICF-CBQOS2-MIB::hpnicfCBQoSApplyObjectSubClassSec,Unsigned32,read-only,,current,,The value represents level-2 sub class index when the QoS apply object is level-3 nesting policy. Otherwise the value is '0xFFFFFFFF'.
.1.3.6.1.4.1.11.2.14.11.15.2.65.2.1.5.5.2,HPN-ICF-CBQOS2-MIB::hpnicfCBQoSIntApplyObjectTable,,not-accessible,,current,,A table used for querying the QoS apply object indexes by interface index. It is suitable for querying QoS apply object indexes for policies applied on Ethernet ports, ATM ports and FR ports.
.1.3.6.1.4.1.11.2.14.11.15.2.65.2.1.5.5.2.1,HPN-ICF-CBQOS2-MIB::hpnicfCBQoSIntApplyObjectEntry,,not-accessible,hpnicfCBQoSIntApplyObjectIfIndex:hpnicfCBQoSApplyObjectDirection,current,,QoS apply object on interface index querying entry.
.1.3.6.1.4.1.11.2.14.11.15.2.65.2.1.5.5.2.1.1,HPN-ICF-CBQOS2-MIB::hpnicfCBQoSIntApplyObjectIfIndex,Unsigned32,not-accessible,,current,,Interface index.
.1.3.6.1.4.1.11.2.14.11.15.2.65.2.1.5.5.2.1.2,HPN-ICF-CBQOS2-MIB::hpnicfCBQoSIntApplyObjectIndex,Unsigned32,read-only,,current,,QoS apply object index.
.1.3.6.1.4.1.11.2.14.11.15.2.65.2.1.5.5.3,HPN-ICF-CBQOS2-MIB::hpnicfCBQoSVlanApplyObjectTable,,not-accessible,,current,,A table used for querying the QoS apply object indexes by VLAN ID and policy direction. It is suitable for querying QoS apply object indexes for policies applied on VLANs. If the value of hpnicfCBQoSVlanApplyObjectVlanID is 0, it means querying Qos apply object index for policy applied on global.
.1.3.6.1.4.1.11.2.14.11.15.2.65.2.1.5.5.3.1,HPN-ICF-CBQOS2-MIB::hpnicfCBQoSVlanApplyObjectEntry,,not-accessible,hpnicfCBQoSVlanApplyObjectVlanID:hpnicfCBQoSApplyObjectDirection,current,,VLAN apply object entry.
.1.3.6.1.4.1.11.2.14.11.15.2.65.2.1.5.5.3.1.1,HPN-ICF-CBQOS2-MIB::hpnicfCBQoSVlanApplyObjectVlanID,Unsigned32,not-accessible,,current,,VLAN ID.
.1.3.6.1.4.1.11.2.14.11.15.2.65.2.1.5.5.3.1.2,HPN-ICF-CBQOS2-MIB::hpnicfCBQoSVlanApplyObjectIndex,Unsigned32,read-only,,current,,QoS apply object index.
.1.3.6.1.4.1.11.2.14.11.15.2.65.2.1.5.5.4,HPN-ICF-CBQOS2-MIB::hpnicfCBQoSPvcApplyObjectTable,,not-accessible,,current,,A table used for querying the QoS apply object indexes by ATM PVC or FR DLCI, ifIndex and policy direction. It is suitable for querying QoS apply object indexes for policies applied on ATM PVCs or FR DLCIs.
.1.3.6.1.4.1.11.2.14.11.15.2.65.2.1.5.5.4.1,HPN-ICF-CBQOS2-MIB::hpnicfCBQoSPvcApplyObjectEntry,,not-accessible,hpnicfCBQoSPvcApplyObjectIfIndex:hpnicfCBQoSPvcApplyObjectPvcID:hpnicfCBQoSApplyObjectDirection,current,,QoS apply object querying entry for ATM PVC or FR DLCI.
.1.3.6.1.4.1.11.2.14.11.15.2.65.2.1.5.5.4.1.1,HPN-ICF-CBQOS2-MIB::hpnicfCBQoSPvcApplyObjectIfIndex,Unsigned32,not-accessible,,current,,Interface index.
.1.3.6.1.4.1.11.2.14.11.15.2.65.2.1.5.5.4.1.2,HPN-ICF-CBQOS2-MIB::hpnicfCBQoSPvcApplyObjectPvcID,Unsigned32,not-accessible,,current,,If the QoS apply object queried is a ATM PVC, its input value represents a VPI/VCI. If the QoS apply object queried is a FR DLCI, its input value represents a value of FR DLCI.
.1.3.6.1.4.1.11.2.14.11.15.2.65.2.1.5.5.4.1.3,HPN-ICF-CBQOS2-MIB::hpnicfCBQoSPvcApplyObjectIndex,Unsigned32,read-only,,current,,QoS apply object index.
.1.3.6.1.4.1.11.2.14.11.15.2.65.2.1.5.5.5,HPN-ICF-CBQOS2-MIB::hpnicfCBQoSNestPolicyApplyObjectTable,,not-accessible,,current,,A table used for querying the nested QoS policy apply object indexes. It is suitable for querying nested QoS apply object indexes for policies applied on ifIndex, VLAN ID, ATM PVC or FR DLCI.
.1.3.6.1.4.1.11.2.14.11.15.2.65.2.1.5.5.5.1,HPN-ICF-CBQOS2-MIB::hpnicfCBQoSNestPolicyApplyObjectEntry,,not-accessible,hpnicfCBQoSApplyObjectIndex:hpnicfCBQoSNestPolicyClassIndex,current,,QoS apply object on policy querying entry.
.1.3.6.1.4.1.11.2.14.11.15.2.65.2.1.5.5.5.1.1,HPN-ICF-CBQOS2-MIB::hpnicfCBQoSNestPolicyClassIndex,Unsigned32,not-accessible,,current,,Policyclass index in father policy.
.1.3.6.1.4.1.11.2.14.11.15.2.65.2.1.5.5.5.1.2,HPN-ICF-CBQOS2-MIB::hpnicfCBQoSNestPolicyApplyObjectIndex,Unsigned32,read-only,,current,,QoS apply object index of the son policy.
.1.3.6.1.4.1.11.2.14.11.15.2.65.2.1.5.5.6,HPN-ICF-CBQOS2-MIB::hpnicfCBQoSCpApplyObjectTable,,not-accessible,,current,,A table used for querying the QoS policy apply object indexes by chassis ID and slot ID. It is suitable for querying QoS apply object indexes for policies applied on control plane.
.1.3.6.1.4.1.11.2.14.11.15.2.65.2.1.5.5.6.1,HPN-ICF-CBQOS2-MIB::hpnicfCBQoSCpApplyObjectEntry,,not-accessible,hpnicfCBQoSCpApplyObjectChassis:hpnicfCBQoSCpApplyObjectSlot:hpnicfCBQoSApplyObjectDirection,current,,QoS policy apply object on control plane querying entry.
.1.3.6.1.4.1.11.2.14.11.15.2.65.2.1.5.5.6.1.1,HPN-ICF-CBQOS2-MIB::hpnicfCBQoSCpApplyObjectChassis,Unsigned32,not-accessible,,current,,Chassis ID.
.1.3.6.1.4.1.11.2.14.11.15.2.65.2.1.5.5.6.1.2,HPN-ICF-CBQOS2-MIB::hpnicfCBQoSCpApplyObjectSlot,Unsigned32,not-accessible,,current,,Slot ID.
.1.3.6.1.4.1.11.2.14.11.15.2.65.2.1.5.5.6.1.3,HPN-ICF-CBQOS2-MIB::hpnicfCBQoSCpApplyObjectIndex,Unsigned32,read-only,,current,,QoS apply object index.
.1.3.6.1.4.1.11.2.14.11.15.2.65.2.1.5.6,HPN-ICF-CBQOS2-MIB::hpnicfCBQoSStaticsObjects,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.2.65.2.1.5.6.1,HPN-ICF-CBQOS2-MIB::hpnicfCBQoSCbqRunInfoTable,,not-accessible,,current,,A table of CBQ running statistics. When policy using queue behavior is applied on QoS apply object, the QoS apply object will use Class Based Queuing.
.1.3.6.1.4.1.11.2.14.11.15.2.65.2.1.5.6.1.1,HPN-ICF-CBQOS2-MIB::hpnicfCBQoSCbqRunInfoEntry,,not-accessible,hpnicfCBQoSApplyObjectIndex,current,,CBQ statistics entry of QoS apply object.
.1.3.6.1.4.1.11.2.14.11.15.2.65.2.1.5.6.1.1.1,HPN-ICF-CBQOS2-MIB::hpnicfCBQoSCbqQueueSize,Integer32,read-only,,current,,Number of packets in CBQ queue.
.1.3.6.1.4.1.11.2.14.11.15.2.65.2.1.5.6.1.1.2,HPN-ICF-CBQOS2-MIB::hpnicfCBQoSCbqDiscard,Counter64,read-only,,current,,Number of discarded packets which couldn't queue.
.1.3.6.1.4.1.11.2.14.11.15.2.65.2.1.5.6.1.1.3,HPN-ICF-CBQOS2-MIB::hpnicfCBQoSCbqEfQueueSize,Integer32,read-only,,current,,Number of packets in EF queue.
.1.3.6.1.4.1.11.2.14.11.15.2.65.2.1.5.6.1.1.4,HPN-ICF-CBQOS2-MIB::hpnicfCBQoSCbqAfQueueSize,Integer32,read-only,,current,,Number of packets in AF queue.
.1.3.6.1.4.1.11.2.14.11.15.2.65.2.1.5.6.1.1.5,HPN-ICF-CBQOS2-MIB::hpnicfCBQoSCbqBeQueueSize,Integer32,read-only,,current,,Number of packets in BE Queue.
.1.3.6.1.4.1.11.2.14.11.15.2.65.2.1.5.6.1.1.6,HPN-ICF-CBQOS2-MIB::hpnicfCBQoSCbqBeActiveQueueNum,Integer32,read-only,,current,,Number of Active BE Queues.
.1.3.6.1.4.1.11.2.14.11.15.2.65.2.1.5.6.1.1.7,HPN-ICF-CBQOS2-MIB::hpnicfCBQoSCbqBeMaxActiveQueueNum,Integer32,read-only,,current,,The max number of Active BE Queues.
.1.3.6.1.4.1.11.2.14.11.15.2.65.2.1.5.6.1.1.8,HPN-ICF-CBQOS2-MIB::hpnicfCBQoSCbqBeTotalQueueNum,Integer32,read-only,,current,,Number of total BE Queues.
.1.3.6.1.4.1.11.2.14.11.15.2.65.2.1.5.6.1.1.9,HPN-ICF-CBQOS2-MIB::hpnicfCBQoSCbqAfAllocatedQueueNum,Integer32,read-only,,current,,Number of allocated AF Queues.
.1.3.6.1.4.1.11.2.14.11.15.2.65.2.1.5.6.2,HPN-ICF-CBQOS2-MIB::hpnicfCBQoSClassMatchRunInfoTable,,not-accessible,,current,,A table of running statistics for matching a classifier on a QoS apply object.
.1.3.6.1.4.1.11.2.14.11.15.2.65.2.1.5.6.2.1,HPN-ICF-CBQOS2-MIB::hpnicfCBQoSClassMatchRunInfoEntry,,not-accessible,hpnicfCBQoSApplyObjectIndex:hpnicfCBQoSPolicyClassIndex,current,,Classifier's matching statistics information entry.
.1.3.6.1.4.1.11.2.14.11.15.2.65.2.1.5.6.2.1.1,HPN-ICF-CBQOS2-MIB::hpnicfCBQoSClassMatchedPackets,Counter64,read-only,,current,,Number of packets matching a class in a QoS policy.
.1.3.6.1.4.1.11.2.14.11.15.2.65.2.1.5.6.2.1.2,HPN-ICF-CBQOS2-MIB::hpnicfCBQoSClassMatchedBytes,Counter64,read-only,,current,,Number of bytes matching a class in a QoS policy.
.1.3.6.1.4.1.11.2.14.11.15.2.65.2.1.5.6.2.1.3,HPN-ICF-CBQOS2-MIB::hpnicfCBQoSClassFwdPktpps,Unsigned32,read-only,,current,,Average number of packets macthing the class forwarded per second in the last interval. Unit: pps.
.1.3.6.1.4.1.11.2.14.11.15.2.65.2.1.5.6.2.1.4,HPN-ICF-CBQOS2-MIB::hpnicfCBQoSClassFwdPktbps,Unsigned32,read-only,,current,,Average bits of packets matching the class forwarded per second in the last interval. Unit: bps.
.1.3.6.1.4.1.11.2.14.11.15.2.65.2.1.5.6.2.1.5,HPN-ICF-CBQOS2-MIB::hpnicfCBQoSClassDropPktpps,Unsigned32,read-only,,current,,Average number of packets matching the class dropped per second in the last interval. Unit: pps.
.1.3.6.1.4.1.11.2.14.11.15.2.65.2.1.5.6.2.1.6,HPN-ICF-CBQOS2-MIB::hpnicfCBQoSClassDropPktbps,Unsigned32,read-only,,current,,Average bits of packets matching the class dropped per second in the last interval. Unit: bps.
.1.3.6.1.4.1.11.2.14.11.15.2.65.2.1.5.6.2.1.7,HPN-ICF-CBQOS2-MIB::hpnicfCBQoSClassFlowStatInterval,Unsigned32,read-only,,current,,Interval of collecting traffic statistics. Unit: minute.
.1.3.6.1.4.1.11.2.14.11.15.2.65.2.1.5.6.2.1.8,HPN-ICF-CBQOS2-MIB::hpnicfCBQoSClassBehaviorStatus,INTEGER,read-only,,current,success(1):failure(2):partialSuccess(3),Classifier-behavior applying status.
.1.3.6.1.4.1.11.2.14.11.15.2.65.2.1.5.6.3,HPN-ICF-CBQOS2-MIB::hpnicfCBQoSCarRunInfoTable,,not-accessible,,current,,A table of running statistics for CAR on a QoS apply object.
.1.3.6.1.4.1.11.2.14.11.15.2.65.2.1.5.6.3.1,HPN-ICF-CBQOS2-MIB::hpnicfCBQoSCarRunInfoEntry,,not-accessible,hpnicfCBQoSApplyObjectIndex:hpnicfCBQoSPolicyClassIndex,current,,CAR statistics information entry.
.1.3.6.1.4.1.11.2.14.11.15.2.65.2.1.5.6.3.1.1,HPN-ICF-CBQOS2-MIB::hpnicfCBQoSCarGreenPackets,Counter64,read-only,,current,,Number of green packets.
.1.3.6.1.4.1.11.2.14.11.15.2.65.2.1.5.6.3.1.2,HPN-ICF-CBQOS2-MIB::hpnicfCBQoSCarGreenBytes,Counter64,read-only,,current,,Number of green bytes.
.1.3.6.1.4.1.11.2.14.11.15.2.65.2.1.5.6.3.1.3,HPN-ICF-CBQOS2-MIB::hpnicfCBQoSCarRedPackets,Counter64,read-only,,current,,Number of red packets.
.1.3.6.1.4.1.11.2.14.11.15.2.65.2.1.5.6.3.1.4,HPN-ICF-CBQOS2-MIB::hpnicfCBQoSCarRedBytes,Counter64,read-only,,current,,Number of red bytes.
.1.3.6.1.4.1.11.2.14.11.15.2.65.2.1.5.6.3.1.5,HPN-ICF-CBQOS2-MIB::hpnicfCBQoSCarYellowPackets,Counter64,read-only,,current,,Number of yellow packets.
.1.3.6.1.4.1.11.2.14.11.15.2.65.2.1.5.6.3.1.6,HPN-ICF-CBQOS2-MIB::hpnicfCBQoSCarYellowBytes,Counter64,read-only,,current,,Number of yellow bytes.
.1.3.6.1.4.1.11.2.14.11.15.2.65.2.1.5.6.4,HPN-ICF-CBQOS2-MIB::hpnicfCBQoSGtsRunInfoTable,,not-accessible,,current,,A table of running statistics for GTS on a QoS apply object.
.1.3.6.1.4.1.11.2.14.11.15.2.65.2.1.5.6.4.1,HPN-ICF-CBQOS2-MIB::hpnicfCBQoSGtsRunInfoEntry,,not-accessible,hpnicfCBQoSApplyObjectIndex:hpnicfCBQoSPolicyClassIndex,current,,GTS statistics entry.
.1.3.6.1.4.1.11.2.14.11.15.2.65.2.1.5.6.4.1.1,HPN-ICF-CBQOS2-MIB::hpnicfCBQoSGtsPassedPackets,Counter64,read-only,,current,,Number of packets passed by GTS.
.1.3.6.1.4.1.11.2.14.11.15.2.65.2.1.5.6.4.1.2,HPN-ICF-CBQOS2-MIB::hpnicfCBQoSGtsPassedBytes,Counter64,read-only,,current,,Number of bytes passed by GTS.
.1.3.6.1.4.1.11.2.14.11.15.2.65.2.1.5.6.4.1.3,HPN-ICF-CBQOS2-MIB::hpnicfCBQoSGtsDiscardedPackets,Counter64,read-only,,current,,Number of packets discarded by GTS.
.1.3.6.1.4.1.11.2.14.11.15.2.65.2.1.5.6.4.1.4,HPN-ICF-CBQOS2-MIB::hpnicfCBQoSGtsDiscardedBytes,Counter64,read-only,,current,,Number of bytes discarded by GTS.
.1.3.6.1.4.1.11.2.14.11.15.2.65.2.1.5.6.4.1.5,HPN-ICF-CBQOS2-MIB::hpnicfCBQoSGtsDelayedPackets,Counter64,read-only,,current,,Number of packets delayed by GTS.
.1.3.6.1.4.1.11.2.14.11.15.2.65.2.1.5.6.4.1.6,HPN-ICF-CBQOS2-MIB::hpnicfCBQoSGtsDelayedBytes,Counter64,read-only,,current,,Number of bytes delayed by GTS.
.1.3.6.1.4.1.11.2.14.11.15.2.65.2.1.5.6.4.1.7,HPN-ICF-CBQOS2-MIB::hpnicfCBQoSGtsQueueSize,Integer32,read-only,,current,,Number of packets in GTS queue.
.1.3.6.1.4.1.11.2.14.11.15.2.65.2.1.5.6.5,HPN-ICF-CBQOS2-MIB::hpnicfCBQoSRemarkRunInfoTable,,not-accessible,,current,,A table of running statistics for remarking on a QoS apply object.
.1.3.6.1.4.1.11.2.14.11.15.2.65.2.1.5.6.5.1,HPN-ICF-CBQOS2-MIB::hpnicfCBQoSRemarkRunInfoEntry,,not-accessible,hpnicfCBQoSApplyObjectIndex:hpnicfCBQoSPolicyClassIndex,current,,Remarking statistics entry.
.1.3.6.1.4.1.11.2.14.11.15.2.65.2.1.5.6.5.1.1,HPN-ICF-CBQOS2-MIB::hpnicfCBQoSRemarkedPackets,Counter64,read-only,,current,,Number of remarked packets.
.1.3.6.1.4.1.11.2.14.11.15.2.65.2.1.5.6.6,HPN-ICF-CBQOS2-MIB::hpnicfCBQoSQueueRunInfoTable,,not-accessible,,current,,A table of running statistics for queue on a QoS apply object.
.1.3.6.1.4.1.11.2.14.11.15.2.65.2.1.5.6.6.1,HPN-ICF-CBQOS2-MIB::hpnicfCBQoSQueueRunInfoEntry,,not-accessible,hpnicfCBQoSApplyObjectIndex:hpnicfCBQoSPolicyClassIndex,current,,Queue statistics entry.
.1.3.6.1.4.1.11.2.14.11.15.2.65.2.1.5.6.6.1.1,HPN-ICF-CBQOS2-MIB::hpnicfCBQoSQueueMatchedPackets,Counter64,read-only,,current,,Number of packets matched to queue.
.1.3.6.1.4.1.11.2.14.11.15.2.65.2.1.5.6.6.1.2,HPN-ICF-CBQOS2-MIB::hpnicfCBQoSQueueMatchedBytes,Counter64,read-only,,current,,Number of bytes matched to queue.
.1.3.6.1.4.1.11.2.14.11.15.2.65.2.1.5.6.6.1.3,HPN-ICF-CBQOS2-MIB::hpnicfCBQoSQueueEnqueuedPackets,Counter64,read-only,,current,,Number of packets queued.
.1.3.6.1.4.1.11.2.14.11.15.2.65.2.1.5.6.6.1.4,HPN-ICF-CBQOS2-MIB::hpnicfCBQoSQueueEnqueuedBytes,Counter64,read-only,,current,,Number of bytes queued.
.1.3.6.1.4.1.11.2.14.11.15.2.65.2.1.5.6.6.1.5,HPN-ICF-CBQOS2-MIB::hpnicfCBQoSQueueDiscardedPackets,Counter64,read-only,,current,,Number of packets discarded when queued by discard method.
.1.3.6.1.4.1.11.2.14.11.15.2.65.2.1.5.6.6.1.6,HPN-ICF-CBQOS2-MIB::hpnicfCBQoSQueueDiscardedBytes,Counter64,read-only,,current,,Number of bytes discarded when queued by discard method.
.1.3.6.1.4.1.11.2.14.11.15.2.65.2.1.5.6.7,HPN-ICF-CBQOS2-MIB::hpnicfCBQoSWredRunInfoTable,,not-accessible,,current,,A table of running statistics for WRED on a QoS apply object.
.1.3.6.1.4.1.11.2.14.11.15.2.65.2.1.5.6.7.1,HPN-ICF-CBQOS2-MIB::hpnicfCBQoSWredRunInfoEntry,,not-accessible,hpnicfCBQoSApplyObjectIndex:hpnicfCBQoSPolicyClassIndex:hpnicfCBQoSWredClassValue,current,,WRED statistics entry.
.1.3.6.1.4.1.11.2.14.11.15.2.65.2.1.5.6.7.1.1,HPN-ICF-CBQOS2-MIB::hpnicfCBQoSWredRandomDiscardedPackets,Counter64,read-only,,current,,Number of packets random-discarded by WRED.
.1.3.6.1.4.1.11.2.14.11.15.2.65.2.1.5.6.7.1.2,HPN-ICF-CBQOS2-MIB::hpnicfCBQoSWredTailDiscardedPackets,Counter64,read-only,,current,,Number of packets tail-discarded by WRED.
.1.3.6.1.4.1.11.2.14.11.15.2.65.2.1.5.6.8,HPN-ICF-CBQOS2-MIB::hpnicfCBQoSAccountingRunInfoTable,,not-accessible,,current,,A table of running statistics for account on a QoS apply object.
.1.3.6.1.4.1.11.2.14.11.15.2.65.2.1.5.6.8.1,HPN-ICF-CBQOS2-MIB::hpnicfCBQoSAccountingRunInfoEntry,,not-accessible,hpnicfCBQoSApplyObjectIndex:hpnicfCBQoSPolicyClassIndex,current,,Account statistics entry.
.1.3.6.1.4.1.11.2.14.11.15.2.65.2.1.5.6.8.1.1,HPN-ICF-CBQOS2-MIB::hpnicfCBQoSAccountingPackets,Counter64,read-only,,current,,Number of packets matching a class in QoS policy.
.1.3.6.1.4.1.11.2.14.11.15.2.65.2.1.5.6.8.1.2,HPN-ICF-CBQOS2-MIB::hpnicfCBQoSAccountingBytes,Counter64,read-only,,current,,Number of bytes matching a class in QoS policy.
.1.3.6.1.4.1.11.2.14.11.15.2.65.2.1.6,HPN-ICF-CBQOS2-MIB::hpnicfCBQoSApplyingStatusObjects,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.2.65.2.1.6.1,HPN-ICF-CBQOS2-MIB::hpnicfCBQoSApplyingStatus,INTEGER,read-only,,current,idle(1):busy(2),This object shows the status of the system when applying policy. It is forbidden to set or read in this MIB module except current table when the value is busy.
.1.3.6.1.4.1.11.2.14.11.15.2.65.2.1.7,HPN-ICF-CBQOS2-MIB::hpnicfCBQoSNotifications,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.2.65.2.1.7.0,HPN-ICF-CBQOS2-MIB::hpnicfCBQoSNotificationsPrefix,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.2.65.2.1.7.0.1,HPN-ICF-CBQOS2-MIB::hpnicfCBQoSIfPolicyChanged,,,,,,This notification will be sent when the applying status of the policy on the interface is changed.
.1.3.6.1.4.1.11.2.14.11.15.2.65.2.1.7.0.2,HPN-ICF-CBQOS2-MIB::hpnicfCBQoSVlanPolicyChanged,,,,,,This notification will be sent when the applying status of the policy on the VLAN is changed.
.1.3.6.1.4.1.11.2.14.11.15.2.66,HPN-ICF-OID-MIB::hpnicfStormConstrain,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.2.66.1,HPN-ICF-STORM-CONSTRAIN-MIB::hpnicfStormScalarGroup,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.2.66.1.1,HPN-ICF-STORM-CONSTRAIN-MIB::hpnicfStormTrapType,INTEGER,accessible-for-notify,,current,broadcast(1):multicast(2):unicast(3),This value is used to identify the type of trap. broadcast: trap message is generated for broadcast flux exceeds upper limit or falls under lower limit on a port. multicast: trap message is generated for multicast flux exceeds upper limit or falls under lower limit on a port. unicast : trap message is generated for unicast flux exceeds upper limit or falls under lower limit on a port.
.1.3.6.1.4.1.11.2.14.11.15.2.66.1.2,HPN-ICF-STORM-CONSTRAIN-MIB::hpnicfStormTrapThreshold,Integer32,accessible-for-notify,,current,,This value is used to figure the threshold of flux in trap message. For example, when the trap is generated for broadcast flux exceeds upper limit on a port, this value is equal to upper limit value configured. And when the trap is generated for broadcast flux fell under lower limit, this value is equal to lower limit value configured.
.1.3.6.1.4.1.11.2.14.11.15.2.66.2,HPN-ICF-STORM-CONSTRAIN-MIB::hpnicfStormTableGroup,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.2.66.2.1,HPN-ICF-STORM-CONSTRAIN-MIB::hpnicfStormCtrlTable,,not-accessible,,current,,A table containing configurations of storm-constrain.
.1.3.6.1.4.1.11.2.14.11.15.2.66.2.1.1,HPN-ICF-STORM-CONSTRAIN-MIB::hpnicfStormCtrlEntry,,not-accessible,ifIndex,current,,Detailed information of storm-constrain configurations.
.1.3.6.1.4.1.11.2.14.11.15.2.66.2.1.1.1,HPN-ICF-STORM-CONSTRAIN-MIB::hpnicfStormCtrlPortStatus,INTEGER,read-only,,current,controlled(1):normal(2),Status of the port: controlled: indicate that the port is in controlled status. Port which is in this status will not forward some type of packet. normal : indicate that the port is in normal status.
.1.3.6.1.4.1.11.2.14.11.15.2.66.2.1.1.2,HPN-ICF-STORM-CONSTRAIN-MIB::hpnicfStormCtrlBroadcastUnit,INTEGER,read-create,,current,none(1):packetsPerSecond(2):ratio(3):bytesPerSecond(4):kbitsPerSecond(5),The unit of the broadcast flux. This value must be set together with hpnicfStormCtrlBroadcastUpper and hpnicfStormCtrlBroadcastLower.
.1.3.6.1.4.1.11.2.14.11.15.2.66.2.1.1.3,HPN-ICF-STORM-CONSTRAIN-MIB::hpnicfStormCtrlBroadcastUpper,Integer32,read-create,,current,,The upper-limit of incoming broadcast taffic at a port within 1 second interval. Its unit depends on hpnicfStormCtrlBroadcastUnit value.
.1.3.6.1.4.1.11.2.14.11.15.2.66.2.1.1.4,HPN-ICF-STORM-CONSTRAIN-MIB::hpnicfStormCtrlBroadcastLower,Integer32,read-create,,current,,The lower-limit of incoming broadcast taffic at a port within 1 second interval. This value must be lower than hpnicfStormCtrlBroadcastUpper value. Its unit depends on hpnicfStormCtrlBroadcastUnit value.
.1.3.6.1.4.1.11.2.14.11.15.2.66.2.1.1.5,HPN-ICF-STORM-CONSTRAIN-MIB::hpnicfStormCtrlMulticastUnit,INTEGER,read-create,,current,none(1):packetsPerSecond(2):ratio(3):bytesPerSecond(4):kbitsPerSecond(5),The unit of the multicast flux. This value must be set together with hpnicfStormCtrlMulticastUpper and hpnicfStormCtrlMulticastLower.
.1.3.6.1.4.1.11.2.14.11.15.2.66.2.1.1.6,HPN-ICF-STORM-CONSTRAIN-MIB::hpnicfStormCtrlMulticastUpper,Integer32,read-create,,current,,The upper-limit of incoming multicast taffic at a port within 1 second interval. Its unit depends on hpnicfStormCtrlMulticastUnit value.
.1.3.6.1.4.1.11.2.14.11.15.2.66.2.1.1.7,HPN-ICF-STORM-CONSTRAIN-MIB::hpnicfStormCtrlMulticastLower,Integer32,read-create,,current,,The lower-limit of incoming multicast taffic at a port within 1 second interval. This value must be lower than hpnicfStormCtrlMulticastUpper value. Its unit depends on hpnicfStormCtrlMulticastUnit value.
.1.3.6.1.4.1.11.2.14.11.15.2.66.2.1.1.8,HPN-ICF-STORM-CONSTRAIN-MIB::hpnicfStormCtrlUnicastUnit,INTEGER,read-create,,current,none(1):packetsPerSecond(2):ratio(3):bytesPerSecond(4):kbitsPerSecond(5),The unit of the unicast flux. This value must be set together with hpnicfStormCtrlUnicastUpper and hpnicfStormCtrlUnicastLower.
.1.3.6.1.4.1.11.2.14.11.15.2.66.2.1.1.9,HPN-ICF-STORM-CONSTRAIN-MIB::hpnicfStormCtrlUnicastUpper,Integer32,read-create,,current,,The upper-limit of incoming unicast taffic at a port within 1 second interval. Its unit depends on hpnicfStormCtrlUnicastUnit value.
.1.3.6.1.4.1.11.2.14.11.15.2.66.2.1.1.10,HPN-ICF-STORM-CONSTRAIN-MIB::hpnicfStormCtrlUnicastLower,Integer32,read-create,,current,,The lower-limit of incoming unicast taffic at a port within 1 second interval. This value must be lower than hpnicfStormCtrlUnicastUpper value. Its unit depends on hpnicfStormCtrlUnicastUnit value.
.1.3.6.1.4.1.11.2.14.11.15.2.66.2.1.1.11,HPN-ICF-STORM-CONSTRAIN-MIB::hpnicfStormCtrlRowStatus,INTEGER,read-create,,current,active(1):notInService(2):notReady(3):createAndGo(4):createAndWait(5):destroy(6),This object is responsible for managing the creation, deletion and modification of rows, which supports active status and CreatAndGo, destroy operation.
.1.3.6.1.4.1.11.2.14.11.15.2.66.2.1.1.12,HPN-ICF-STORM-CONSTRAIN-MIB::hpnicfStormCtrlPortMode,INTEGER,read-create,,current,none(1):block(2):shutdown(3),The storm control mode of the port.
.1.3.6.1.4.1.11.2.14.11.15.2.66.3,HPN-ICF-STORM-CONSTRAIN-MIB::hpnicfStormNotifications,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.2.66.3.1,HPN-ICF-STORM-CONSTRAIN-MIB::hpnicfStormRising,,,,,,This trap message is generated when any type of the flux exceeds its upper limit on a port.
.1.3.6.1.4.1.11.2.14.11.15.2.66.3.2,HPN-ICF-STORM-CONSTRAIN-MIB::hpnicfStormFalling,,,,,,This trap message is generated when a flux which used to overflow its upper limit, falls below its lower limit on a port.
.1.3.6.1.4.1.11.2.14.11.15.2.67,HPN-ICF-OID-MIB::hpnicfIpAddrMIB,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.2.67.1,HPN-ICF-IP-ADDRESS-MIB::hpnicfIpAddressObjects,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.2.67.1.1,HPN-ICF-IP-ADDRESS-MIB::hpnicfIpAddressConfig,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.2.67.1.1.1,HPN-ICF-IP-ADDRESS-MIB::hpnicfIpAddrSetTable,,not-accessible,,current,,The table of address information is relevant to this entity's IPv4 addresses for setting. The address information that can be read and set in this table is a subset of the address information that can be read in hpnicfIpAddrReadTable and ipAddrTable in IP-MIB. This table is used to configure IPv4 addresses of an interface identified by hpnicfIpAddrSetIfIndex. When users create or delete an entry in this table, the agent also increases or reduces a corresponding entry in the hpnicfIpAddrReadTable and ipAddrTable in IP-MIB. When an interface which has been assigned IPv6 address is deleted, the agent also deletes the entry corresponding to the interface in this table and hpnicfIpAddrReadTable. All IPv4 addresses in this table will also show in ipAddrTable in IP-MIB. 
.1.3.6.1.4.1.11.2.14.11.15.2.67.1.1.1.1,HPN-ICF-IP-ADDRESS-MIB::hpnicfIpAddrSetEntry,,not-accessible,hpnicfIpAddrSetIfIndex:hpnicfIpAddrSetAddrType:hpnicfIpAddrSetAddr,current,,Define the IPv4 address information. 
.1.3.6.1.4.1.11.2.14.11.15.2.67.1.1.1.1.1,HPN-ICF-IP-ADDRESS-MIB::hpnicfIpAddrSetIfIndex,Integer32,not-accessible,,current,,The index value which uniquely identifies the interface to which this entry is applicable. The interface identified by a particular value of this index is the same interface as identified by the same value of RFC 1573's ifIndex. 
.1.3.6.1.4.1.11.2.14.11.15.2.67.1.1.1.1.2,HPN-ICF-IP-ADDRESS-MIB::hpnicfIpAddrSetAddrType,INTEGER,not-accessible,,current,unknown(0):ipv4(1):ipv6(2):ipv4z(3):ipv6z(4):dns(16),The IP address type to which this entry's address information pertains. The value must be ipv4. 
.1.3.6.1.4.1.11.2.14.11.15.2.67.1.1.1.1.3,HPN-ICF-IP-ADDRESS-MIB::hpnicfIpAddrSetAddr,OCTET,not-accessible,,current,,The IPv4 address to which this entry's address information pertains. 
.1.3.6.1.4.1.11.2.14.11.15.2.67.1.1.1.1.4,HPN-ICF-IP-ADDRESS-MIB::hpnicfIpAddrSetMask,IpAddress,read-create,,current,,The subnet mask associated with the IPv4 address of this entry. The value of the mask is an IPv4 address with all the network bits set to 1 and all the hosts bits set to 0. 
.1.3.6.1.4.1.11.2.14.11.15.2.67.1.1.1.1.5,HPN-ICF-IP-ADDRESS-MIB::hpnicfIpAddrSetSourceType,INTEGER,read-create,,current,assignedIp(1),Indicate the type of source of the IPv4 address.
.1.3.6.1.4.1.11.2.14.11.15.2.67.1.1.1.1.6,HPN-ICF-IP-ADDRESS-MIB::hpnicfIpAddrSetCatalog,INTEGER,read-create,,current,primary(1):sub(2),Indicate the category of the IPv4 address.
.1.3.6.1.4.1.11.2.14.11.15.2.67.1.1.1.1.7,HPN-ICF-IP-ADDRESS-MIB::hpnicfIpAddrSetRowStatus,INTEGER,read-create,,current,active(1):notInService(2):notReady(3):createAndGo(4):createAndWait(5):destroy(6),This object is used to create a new row or delete an existing row in this table, only support active, createAndGo and destroy. 
.1.3.6.1.4.1.11.2.14.11.15.2.67.1.1.2,HPN-ICF-IP-ADDRESS-MIB::hpnicfIpAddrReadTable,,not-accessible,,current,,The table of address information is relevant to this entity's IP addresses for reading. This is the extension of the ipAddrTable in IP-MIB. All IPv4 addresses in this table will also show in ipAddrTable in IP-MIB. 
.1.3.6.1.4.1.11.2.14.11.15.2.67.1.1.2.1,HPN-ICF-IP-ADDRESS-MIB::hpnicfIpAddrReadEntry,,not-accessible,hpnicfIpAddrReadIfIndex:hpnicfIpAddrReadAddrType:hpnicfIpAddrReadAddr,current,,Define the IPv4 address information. 
.1.3.6.1.4.1.11.2.14.11.15.2.67.1.1.2.1.1,HPN-ICF-IP-ADDRESS-MIB::hpnicfIpAddrReadIfIndex,Integer32,not-accessible,,current,,The index value which uniquely identifies the interface to which this entry is applicable. The interface identified by a particular value of this index is the same interface as identified by the same value of RFC 1573's ifIndex. 
.1.3.6.1.4.1.11.2.14.11.15.2.67.1.1.2.1.2,HPN-ICF-IP-ADDRESS-MIB::hpnicfIpAddrReadAddrType,INTEGER,not-accessible,,current,unknown(0):ipv4(1):ipv6(2):ipv4z(3):ipv6z(4):dns(16),The IP address type to which this entry's address information pertains. The value must be ipv4. 
.1.3.6.1.4.1.11.2.14.11.15.2.67.1.1.2.1.3,HPN-ICF-IP-ADDRESS-MIB::hpnicfIpAddrReadAddr,OCTET,not-accessible,,current,,The IPv4 address to which this entry's address information pertains. 
.1.3.6.1.4.1.11.2.14.11.15.2.67.1.1.2.1.4,HPN-ICF-IP-ADDRESS-MIB::hpnicfIpAddrReadMask,IpAddress,read-only,,current,,The subnet mask associated with the IPv4 address of this entry. The value of the mask is an IPv4 address with all the network bits set to 1 and all the hosts bits set to 0. 
.1.3.6.1.4.1.11.2.14.11.15.2.67.1.1.2.1.5,HPN-ICF-IP-ADDRESS-MIB::hpnicfIpAddrReadSourceType,INTEGER,read-only,,current,assignedIp(1):cluster(2):dhcp(3):bootp(4):negotiate(5):unnumbered(6):vrrp(7),Indicate the type of source of the IPv4 address.
.1.3.6.1.4.1.11.2.14.11.15.2.67.1.1.2.1.6,HPN-ICF-IP-ADDRESS-MIB::hpnicfIpAddrReadCatalog,INTEGER,read-only,,current,primary(1):sub(2):cluster(3):vrrp(4),Indicate the category of the IPv4 address.
.1.3.6.1.4.1.11.2.14.11.15.2.67.1.1.3,HPN-ICF-IP-ADDRESS-MIB::hpnicfIpv4AddrTable,,not-accessible,,current,,This table is used to configure primary IPv4 address of an interface identified by ifIndex.
.1.3.6.1.4.1.11.2.14.11.15.2.67.1.1.3.1,HPN-ICF-IP-ADDRESS-MIB::hpnicfIpv4AddrEntry,,not-accessible,ifIndex,current,,Define the IPv4 address information. 
.1.3.6.1.4.1.11.2.14.11.15.2.67.1.1.3.1.1,HPN-ICF-IP-ADDRESS-MIB::hpnicfIpv4AddrAddr,IpAddress,read-create,,current,,The IPv4 address to which this entry's address information pertains. 
.1.3.6.1.4.1.11.2.14.11.15.2.67.1.1.3.1.2,HPN-ICF-IP-ADDRESS-MIB::hpnicfIpv4AddrMask,IpAddress,read-create,,current,,The subnet mask associated with the IPv4 address of this entry. The value of the mask is an IPv4 address with all the network bits set to 1 and all the hosts bits set to 0. 
.1.3.6.1.4.1.11.2.14.11.15.2.67.1.1.3.1.3,HPN-ICF-IP-ADDRESS-MIB::hpnicfIpv4AddrRowStatus,INTEGER,read-create,,current,active(1):notInService(2):notReady(3):createAndGo(4):createAndWait(5):destroy(6),This object is used to create a new row or delete an existing row in this table, only support active, notInService, createAndGo and destroy. 
.1.3.6.1.4.1.11.2.14.11.15.2.67.2,HPN-ICF-IP-ADDRESS-MIB::hpnicfIpAddrNotify,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.2.67.2.1,HPN-ICF-IP-ADDRESS-MIB::hpnicfIpAddrNotifyScalarObjects,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.2.67.2.1.1,HPN-ICF-IP-ADDRESS-MIB::hpnicfIpAddrNotifyIfIndex,Integer32,accessible-for-notify,,current,,The IP address IfIndex of specified interface on the device.
.1.3.6.1.4.1.11.2.14.11.15.2.67.2.1.2,HPN-ICF-IP-ADDRESS-MIB::hpnicfIpAddrOldIpAddress,OCTET,accessible-for-notify,,current,,The Old IP address of specified interface on the device.
.1.3.6.1.4.1.11.2.14.11.15.2.67.2.1.3,HPN-ICF-IP-ADDRESS-MIB::hpnicfIpAddrNewIpAddress,OCTET,accessible-for-notify,,current,,The New IP address of specified interface on the device.
.1.3.6.1.4.1.11.2.14.11.15.2.67.2.1.4,HPN-ICF-IP-ADDRESS-MIB::hpnicfIpAddrFirstTrapTime,TimeTicks,accessible-for-notify,,current,,Represents the first trap time.
.1.3.6.1.4.1.11.2.14.11.15.2.67.2.2,HPN-ICF-IP-ADDRESS-MIB::hpnicfIpAddrNotifyObjects,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.2.67.2.2.0,HPN-ICF-IP-ADDRESS-MIB::hpnicfIpAddrNotifyObjectsPrefix,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.2.67.2.2.0.1,HPN-ICF-IP-ADDRESS-MIB::hpnicfIpAddressChangeNotify,,,,,,This notification will be generated when the IP address of interface is changed. The change maybe originate from NMS, DHCP server or administrator. This notification announces useful IP address change. So it is triggered by significative IP address change.
.1.3.6.1.4.1.11.2.14.11.15.2.68,HPN-ICF-OID-MIB::hpnicfMirrGroup,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.2.68.1,HPN-ICF-MIRRORGROUP-MIB::hpnicfMGInfoObjects,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.2.68.1.1,HPN-ICF-MIRRORGROUP-MIB::hpnicfMGObjects,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.2.68.1.1.1,HPN-ICF-MIRRORGROUP-MIB::hpnicfMGTable,,not-accessible,,current,,A list of mirror group entries.
.1.3.6.1.4.1.11.2.14.11.15.2.68.1.1.1.1,HPN-ICF-MIRRORGROUP-MIB::hpnicfMGEntry,,not-accessible,hpnicfMGID,current,,A list of parameters that describe a mirror group to be created.
.1.3.6.1.4.1.11.2.14.11.15.2.68.1.1.1.1.1,HPN-ICF-MIRRORGROUP-MIB::hpnicfMGID,Integer32,not-accessible,,current,,An index that uniquely identifies an entry in the mirror group table.
.1.3.6.1.4.1.11.2.14.11.15.2.68.1.1.1.1.2,HPN-ICF-MIRRORGROUP-MIB::hpnicfMGType,INTEGER,read-create,,current,local(1):remoteSource(2):remoteDestination(3),GroupType.
.1.3.6.1.4.1.11.2.14.11.15.2.68.1.1.1.1.3,HPN-ICF-MIRRORGROUP-MIB::hpnicfMGStatus,INTEGER,read-only,,current,active(1):inactive(2),The status of a mirror group. A mirror group is inactive when it was created. The status of a mirror group can be changed automatically from inactive to active when appropriate conditions were met. Also, it can be changed automatically from active to inactive when these conditions disappeared. Followings are conditions for a mirror group to become active: group type conditions ============================================================================ local any source (mirroring-port, mirroring-VLAN, or mirroring-CPU), monitor-port remoteSource If one of the three conditions is satisfied, remoteSource group would be active. 1) any source (mirroring-port, mirroring-VLAN, or mirroring-CPU), remote-probe VLAN, configurable reflector-port (which is not supported on some devices) 2) any source (mirroring-port, mirroring-VLAN, or mirroring-CPU), remote-probe VLAN, egress-port (which is not supported on some devices) 3) any source (mirroring-port, mirroring-VLAN, or mirroring-CPU), remote-probe VLAN, fixed reflector-port(which is not supported on some devices) remoteDestination monitor-port, remote-probe VLAN 
.1.3.6.1.4.1.11.2.14.11.15.2.68.1.1.1.1.4,HPN-ICF-MIRRORGROUP-MIB::hpnicfMGRowStatus,INTEGER,read-create,,current,active(1):notInService(2):notReady(3):createAndGo(4):createAndWait(5):destroy(6),RowStatus
.1.3.6.1.4.1.11.2.14.11.15.2.68.1.2,HPN-ICF-MIRRORGROUP-MIB::hpnicfMGMirrorIfObjects,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.2.68.1.2.1,HPN-ICF-MIRRORGROUP-MIB::hpnicfMGMirrorIfTable,,not-accessible,,current,,A list of mirror group mirroring-port entries.
.1.3.6.1.4.1.11.2.14.11.15.2.68.1.2.1.1,HPN-ICF-MIRRORGROUP-MIB::hpnicfMGMirrorIfEntry,,not-accessible,hpnicfMGID:hpnicfMGMirrorIfIndex:hpnicfMGMirrorDirection,current,,A list of parameters that describe a mirroring-port to be added to a mirror group.
.1.3.6.1.4.1.11.2.14.11.15.2.68.1.2.1.1.1,HPN-ICF-MIRRORGROUP-MIB::hpnicfMGMirrorIfIndex,Integer32,not-accessible,,current,,IfIndex of mirror group mirroring-port.
.1.3.6.1.4.1.11.2.14.11.15.2.68.1.2.1.1.2,HPN-ICF-MIRRORGROUP-MIB::hpnicfMGMirrorDirection,INTEGER,not-accessible,,current,inbound(1):outbound(2):both(3),Mirror direction of mirroring-port.
.1.3.6.1.4.1.11.2.14.11.15.2.68.1.2.1.1.3,HPN-ICF-MIRRORGROUP-MIB::hpnicfMGMirrorRowStatus,INTEGER,read-create,,current,active(1):notInService(2):notReady(3):createAndGo(4):createAndWait(5):destroy(6),RowStatus
.1.3.6.1.4.1.11.2.14.11.15.2.68.1.3,HPN-ICF-MIRRORGROUP-MIB::hpnicfMGMonitorIfObjects,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.2.68.1.3.1,HPN-ICF-MIRRORGROUP-MIB::hpnicfMGMonitorIfTable,,not-accessible,,current,,A list of mirror group monitor-port entries.
.1.3.6.1.4.1.11.2.14.11.15.2.68.1.3.1.1,HPN-ICF-MIRRORGROUP-MIB::hpnicfMGMonitorIfEntry,,not-accessible,hpnicfMGID:hpnicfMGMonitorIfIndex,current,,A list of parameters that describe a monitor-port to be added to a mirror group.
.1.3.6.1.4.1.11.2.14.11.15.2.68.1.3.1.1.1,HPN-ICF-MIRRORGROUP-MIB::hpnicfMGMonitorIfIndex,Integer32,not-accessible,,current,,IfIndex of mirror group monitor-port.
.1.3.6.1.4.1.11.2.14.11.15.2.68.1.3.1.1.2,HPN-ICF-MIRRORGROUP-MIB::hpnicfMGMonitorRowStatus,INTEGER,read-create,,current,active(1):notInService(2):notReady(3):createAndGo(4):createAndWait(5):destroy(6),RowStatus
.1.3.6.1.4.1.11.2.14.11.15.2.68.1.4,HPN-ICF-MIRRORGROUP-MIB::hpnicfMGReflectorIfObjects,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.2.68.1.4.1,HPN-ICF-MIRRORGROUP-MIB::hpnicfMGReflectorIfTable,,not-accessible,,current,,A list of mirror group reflector-port entries.
.1.3.6.1.4.1.11.2.14.11.15.2.68.1.4.1.1,HPN-ICF-MIRRORGROUP-MIB::hpnicfMGReflectorIfEntry,,not-accessible,hpnicfMGID:hpnicfMGReflectorIfIndex,current,,A list of parameters that describe a reflector-port to be added to a mirror group.
.1.3.6.1.4.1.11.2.14.11.15.2.68.1.4.1.1.1,HPN-ICF-MIRRORGROUP-MIB::hpnicfMGReflectorIfIndex,Integer32,not-accessible,,current,,IfIndex of mirror group reflector-port.
.1.3.6.1.4.1.11.2.14.11.15.2.68.1.4.1.1.2,HPN-ICF-MIRRORGROUP-MIB::hpnicfMGReflectorRowStatus,INTEGER,read-create,,current,active(1):notInService(2):notReady(3):createAndGo(4):createAndWait(5):destroy(6),RowStatus
.1.3.6.1.4.1.11.2.14.11.15.2.68.1.5,HPN-ICF-MIRRORGROUP-MIB::hpnicfMGRprobeVlanObjects,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.2.68.1.5.1,HPN-ICF-MIRRORGROUP-MIB::hpnicfMGRprobeVlanTable,,not-accessible,,current,,A list of mirror group remote-probe vlan entries.
.1.3.6.1.4.1.11.2.14.11.15.2.68.1.5.1.1,HPN-ICF-MIRRORGROUP-MIB::hpnicfMGRprobeVlanEntry,,not-accessible,hpnicfMGID:hpnicfMGRprobeVlanID,current,,A list of parameters that describe a remote-probe vlan to be added to a mirror group. Details about remote-probe vlan please refer to mirror group manual.
.1.3.6.1.4.1.11.2.14.11.15.2.68.1.5.1.1.1,HPN-ICF-MIRRORGROUP-MIB::hpnicfMGRprobeVlanID,Integer32,not-accessible,,current,,An index that uniquely identifies an entry in the remote-probe vlan table.
.1.3.6.1.4.1.11.2.14.11.15.2.68.1.5.1.1.2,HPN-ICF-MIRRORGROUP-MIB::hpnicfMGRprobeVlanRowStatus,INTEGER,read-create,,current,active(1):notInService(2):notReady(3):createAndGo(4):createAndWait(5):destroy(6),RowStatus
.1.3.6.1.4.1.11.2.14.11.15.2.68.1.6,HPN-ICF-MIRRORGROUP-MIB::hpnicfMGEgressIfObjects,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.2.68.1.6.1,HPN-ICF-MIRRORGROUP-MIB::hpnicfMGEgressIfTable,,not-accessible,,current,,A list of mirror group egress-port entries.
.1.3.6.1.4.1.11.2.14.11.15.2.68.1.6.1.1,HPN-ICF-MIRRORGROUP-MIB::hpnicfMGEgressIfEntry,,not-accessible,hpnicfMGID:hpnicfMGEgressIfIndex,current,,A list of parameters that describe an egress-port to be added to a mirror group.
.1.3.6.1.4.1.11.2.14.11.15.2.68.1.6.1.1.1,HPN-ICF-MIRRORGROUP-MIB::hpnicfMGEgressIfIndex,Integer32,not-accessible,,current,,IfIndex of mirror group egress-port.
.1.3.6.1.4.1.11.2.14.11.15.2.68.1.6.1.1.2,HPN-ICF-MIRRORGROUP-MIB::hpnicfMGEgressRowStatus,INTEGER,read-create,,current,active(1):notInService(2):notReady(3):createAndGo(4):createAndWait(5):destroy(6),RowStatus
.1.3.6.1.4.1.11.2.14.11.15.2.68.1.7,HPN-ICF-MIRRORGROUP-MIB::hpnicfMGMirrorVlanObjects,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.2.68.1.7.1,HPN-ICF-MIRRORGROUP-MIB::hpnicfMGMirrorVlanTable,,not-accessible,,current,,A list of mirror group mirroring-VLAN entries.
.1.3.6.1.4.1.11.2.14.11.15.2.68.1.7.1.1,HPN-ICF-MIRRORGROUP-MIB::hpnicfMGMirrorVlanEntry,,not-accessible,hpnicfMGID:hpnicfMGMirrorVlanID,current,,A list of parameters that describe a mirroring-VLAN to be added to a mirror group.
.1.3.6.1.4.1.11.2.14.11.15.2.68.1.7.1.1.1,HPN-ICF-MIRRORGROUP-MIB::hpnicfMGMirrorVlanID,Integer32,not-accessible,,current,,Mirror group mirroring-VLAN ID.
.1.3.6.1.4.1.11.2.14.11.15.2.68.1.7.1.1.2,HPN-ICF-MIRRORGROUP-MIB::hpnicfMGMirrorVlanDirection,INTEGER,read-create,,current,inbound(1):outbound(2):both(3),Mirror direction of mirroring-VLAN.
.1.3.6.1.4.1.11.2.14.11.15.2.68.1.7.1.1.3,HPN-ICF-MIRRORGROUP-MIB::hpnicfMGMirrorVlanRowStatus,INTEGER,read-create,,current,active(1):notInService(2):notReady(3):createAndGo(4):createAndWait(5):destroy(6),RowStatus
.1.3.6.1.4.1.11.2.14.11.15.2.68.1.8,HPN-ICF-MIRRORGROUP-MIB::hpnicfMGMirrorCpuObjects,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.2.68.1.8.1,HPN-ICF-MIRRORGROUP-MIB::hpnicfMGMirrorCpuTable,,not-accessible,,current,,A list of mirror group mirroring-CPU entries.
.1.3.6.1.4.1.11.2.14.11.15.2.68.1.8.1.1,HPN-ICF-MIRRORGROUP-MIB::hpnicfMGMirrorCpuEntry,,not-accessible,hpnicfMGID:hpnicfMGMirrorCpuChassis:hpnicfMGMirrorCpuSlot,current,,A list of parameters that describe a mirroring-CPU to be added to a mirror group.
.1.3.6.1.4.1.11.2.14.11.15.2.68.1.8.1.1.1,HPN-ICF-MIRRORGROUP-MIB::hpnicfMGMirrorCpuChassis,Unsigned32,not-accessible,,current,,Chassis ID of mirroring-CPU. On a centralized device, centralized IRF device, or distributed device in standalone mode, the value for this node is always zero.
.1.3.6.1.4.1.11.2.14.11.15.2.68.1.8.1.1.2,HPN-ICF-MIRRORGROUP-MIB::hpnicfMGMirrorCpuSlot,Unsigned32,not-accessible,,current,,Slot ID of mirroring-CPU. On a centralized device, the value for this node is always zero.
.1.3.6.1.4.1.11.2.14.11.15.2.68.1.8.1.1.3,HPN-ICF-MIRRORGROUP-MIB::hpnicfMGMirrorCpuDirection,INTEGER,read-create,,current,inbound(1):outbound(2):both(3),Mirror direction of mirroring-CPU.
.1.3.6.1.4.1.11.2.14.11.15.2.68.1.8.1.1.4,HPN-ICF-MIRRORGROUP-MIB::hpnicfMGMirrorCpuRowStatus,INTEGER,read-create,,current,active(1):notInService(2):notReady(3):createAndGo(4):createAndWait(5):destroy(6),RowStatus
.1.3.6.1.4.1.11.2.14.11.15.2.69,HPN-ICF-OID-MIB::hpnicfQINQ,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.2.69.1,HPN-ICF-QINQ-MIB::hpnicfQinQMibObject,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.2.69.1.1,HPN-ICF-QINQ-MIB::hpnicfQinQGlobalConfigGroup,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.2.69.1.1.1,HPN-ICF-QINQ-MIB::hpnicfQinQBpduTunnelSwitch,INTEGER,read-write,,current,enabled(1):disabled(2),The global configuration switch of BPDU 802.1q tunnel. If global configuration is disabled, BPDU tunnel function will be disabled despite of the corresponding configuration of interface. BPDU tunnel function of a certain interface would work only if the global and interface's switch are both enabled.
.1.3.6.1.4.1.11.2.14.11.15.2.69.1.1.2,HPN-ICF-QINQ-MIB::hpnicfQinQEthernetTypeValue,Integer32,read-write,,current,,Ethernet protocol type configuring for a global value. The ethernet protocol type is also the TPID(Tag Protocol Identity) field of a VLAN tag described in 802.1q document. This value can be also configured for an individual interface or VLAN. The node that configure this value for a single interface is hpnicfQinQIfEthernetType, whose priority is higher than hpnicfQinQEthernetTypeValue. That means, if the value configured for a interface is different from the global value, the switch will select the configuration of the interface and ignore the global configuration. The ethernet protocol type of node hpnicfQinQVidEthernetType that configured for a VLAN has the highest priority.
.1.3.6.1.4.1.11.2.14.11.15.2.69.1.1.3,HPN-ICF-QINQ-MIB::hpnicfQinQServiceTPIDValue,Integer32,read-write,,current,,Ethernet protocol type configured for service VLAN tags globally. The ethernet protocol type is also the TPID(Tag Protocol Identity) field of a VLAN tag described in 802.1q document. This value can be also configured for an individual interface. The node that configure this value for a single interface is hpnicfQinQIfServiceTPIDValue, whose priority is higher than hpnicfQinQServiceTPIDValue. That means, if the value configured for a interface is different from the global value, the switch will select the configuration of the interface and ignore the global configuration.
.1.3.6.1.4.1.11.2.14.11.15.2.69.1.1.4,HPN-ICF-QINQ-MIB::hpnicfQinQCustomerTPIDValue,Integer32,read-write,,current,,Ethernet protocol type configured for customer VLAN tags globally. The ethernet protocol type is also the TPID(Tag Protocol Identity) field of a VLAN tag described in 802.1q document. This value can be also configured for an individual interface. The node that configure this value for a single interface is hpnicfQinQIfCustomerTPIDValue, whose priority is higher than hpnicfQinQCustomerTPIDValue. That means, if the value configured for a interface is different from the global value, the switch will select the configuration of the interface and ignore the global configuration.
.1.3.6.1.4.1.11.2.14.11.15.2.69.1.2,HPN-ICF-QINQ-MIB::hpnicfQinQBpduTunnelTable,,not-accessible,,current,,A table for configuring 802.1q BPDU tunnel function for interfaces.
.1.3.6.1.4.1.11.2.14.11.15.2.69.1.2.1,HPN-ICF-QINQ-MIB::hpnicfQinQBpduTunnelEntry,,not-accessible,ifIndex:hpnicfQinQProtocolIndex,current,,An entry for configuring 802.1q BPDU tunnel function for interfaces.
.1.3.6.1.4.1.11.2.14.11.15.2.69.1.2.1.1,HPN-ICF-QINQ-MIB::hpnicfQinQProtocolIndex,INTEGER,not-accessible,,current,bpdu(1):stp(2):gmosaic(3):igmp(4),The index of protocol on which the BPDU tunnel state will be set. 'bpdu' represents status of BPDU tunnel. 'stp' represents STP tunnel. 'gmosaic' represents GMOSAIC tunnel. 'igmp' represents IGMP tunnel. STP/GMOSAIC/IGMP tunnel will start to work only if BPDU tunnel and STP/GMOSAIC/IGMP tunnel are both enabled.
.1.3.6.1.4.1.11.2.14.11.15.2.69.1.2.1.2,HPN-ICF-QINQ-MIB::hpnicfQinQBpduRowStatus,INTEGER,read-create,,current,active(1):notInService(2):notReady(3):createAndGo(4):createAndWait(5):destroy(6),Operation status of this table entry.
.1.3.6.1.4.1.11.2.14.11.15.2.69.1.3,HPN-ICF-QINQ-MIB::hpnicfQinQPriorityRemarkTable,,not-accessible,,current,,A table for configuring priority field in 802.1Q-in-Q outer VLAN tag for interfaces. This feature uses the priority of an inner VLAN tag to remark the priority of an outer VLAN tag.
.1.3.6.1.4.1.11.2.14.11.15.2.69.1.3.1,HPN-ICF-QINQ-MIB::hpnicfQinQPriorityRemarkEntry,,not-accessible,ifIndex:hpnicfQinQPriorityValue,current,,An entry for configuring priority remark function for interfaces.
.1.3.6.1.4.1.11.2.14.11.15.2.69.1.3.1.1,HPN-ICF-QINQ-MIB::hpnicfQinQPriorityValue,Integer32,not-accessible,,current,,The priority value in inner VLAN tag. Since the priority range is from 0 to 7, yet the index range is from 1 to 8. Thus, the actual priority value equals to the value that subtracts 1 from corresponding index value.
.1.3.6.1.4.1.11.2.14.11.15.2.69.1.3.1.2,HPN-ICF-QINQ-MIB::hpnicfQinQPriorityRemarkValue,Integer32,read-create,,current,,The new priority value used to fill outer tag.
.1.3.6.1.4.1.11.2.14.11.15.2.69.1.3.1.3,HPN-ICF-QINQ-MIB::hpnicfQinQPriorityRowStatus,INTEGER,read-create,,current,active(1):notInService(2):notReady(3):createAndGo(4):createAndWait(5):destroy(6),Operation status of this table entry.
.1.3.6.1.4.1.11.2.14.11.15.2.69.1.4,HPN-ICF-QINQ-MIB::hpnicfQinQVidTable,,not-accessible,,current,,A table for configuring VLAN ID of the 802.1Q-in-Q interfaces.
.1.3.6.1.4.1.11.2.14.11.15.2.69.1.4.1,HPN-ICF-QINQ-MIB::hpnicfQinQVidEntry,,not-accessible,ifIndex:hpnicfQinQVlanID,current,,An entry for configuring VLAN ID of the 802.1Q-in-Q interfaces.
.1.3.6.1.4.1.11.2.14.11.15.2.69.1.4.1.1,HPN-ICF-QINQ-MIB::hpnicfQinQVlanID,Integer32,not-accessible,,current,,VLAN ID
.1.3.6.1.4.1.11.2.14.11.15.2.69.1.4.1.2,HPN-ICF-QINQ-MIB::hpnicfQinQInboundVidListLow,OCTET,read-create,,current,,The inbound VLAN IDs which need 802.1Q-in-Q processing. The VLAN ID range, described by bitmap, is from 1 to 2048. The length of bitmap is 256 in bytes. Each octet within this value specifies a set of eight VLANs, with the first octet specifying VLANs 1 through 8, the second octet specifying VLANs 9 through 16, etc. Within each octet, the most significant bit represents the highest numbered VLAN, and the least significant bit represents the lowest numbered VLAN.
.1.3.6.1.4.1.11.2.14.11.15.2.69.1.4.1.3,HPN-ICF-QINQ-MIB::hpnicfQinQInboundVidListHigh,OCTET,read-create,,current,,The inbound VLAN IDs which need 802.1Q-in-Q processing. The VLAN ID range, described by bitmap, is from 2049 to 4094. The length of bitmap is 256 in bytes. Each octet within this value specifies a set of eight VLANs, with the first octet specifying VLANs 2049 through 2056, the second octet specifying VLANs 2057 through 2064, etc. Within each octet, the most significant bit represents the highest numbered VLAN, and the least significant bit represents the lowest numbered VLAN.
.1.3.6.1.4.1.11.2.14.11.15.2.69.1.4.1.4,HPN-ICF-QINQ-MIB::hpnicfQinQVidEthernetType,Integer32,read-create,,current,,Ethernet protocol type configuring for a VLAN.
.1.3.6.1.4.1.11.2.14.11.15.2.69.1.4.1.5,HPN-ICF-QINQ-MIB::hpnicfQinQVidRowStatus,INTEGER,read-create,,current,active(1):notInService(2):notReady(3):createAndGo(4):createAndWait(5):destroy(6),Operation status of this table entry.
.1.3.6.1.4.1.11.2.14.11.15.2.69.1.5,HPN-ICF-QINQ-MIB::hpnicfQinQVidSwapTable,,not-accessible,,current,,A table for configuring 802.1Q-in-Q inner VLAN ID swapping function for interfaces.
.1.3.6.1.4.1.11.2.14.11.15.2.69.1.5.1,HPN-ICF-QINQ-MIB::hpnicfQinQVidSwapEntry,,not-accessible,ifIndex:hpnicfQinQVlanID:hpnicfQinQVidSwapOld,current,,An entry for configuring 802.1Q-in-Q inner VLAN ID swapping function for interfaces.
.1.3.6.1.4.1.11.2.14.11.15.2.69.1.5.1.1,HPN-ICF-QINQ-MIB::hpnicfQinQVidSwapOld,Integer32,not-accessible,,current,,The old VLAN ID of original 802.1Q packets.
.1.3.6.1.4.1.11.2.14.11.15.2.69.1.5.1.2,HPN-ICF-QINQ-MIB::hpnicfQinQVidSwapNew,Integer32,read-create,,current,,The new VLAN ID of original 802.1Q packets.
.1.3.6.1.4.1.11.2.14.11.15.2.69.1.5.1.3,HPN-ICF-QINQ-MIB::hpnicfQinQVidSwapRowStatus,INTEGER,read-create,,current,active(1):notInService(2):notReady(3):createAndGo(4):createAndWait(5):destroy(6),Operation status of this table entry.
.1.3.6.1.4.1.11.2.14.11.15.2.69.1.6,HPN-ICF-QINQ-MIB::hpnicfQinQPrioritySwapTable,,not-accessible,,current,,A table for configuring 802.1Q-in-Q inner VLAN priority swapping function for interfaces. Using this function, the priority of inner VLAN tag can be modified.
.1.3.6.1.4.1.11.2.14.11.15.2.69.1.6.1,HPN-ICF-QINQ-MIB::hpnicfQinQPrioritySwapEntry,,not-accessible,ifIndex:hpnicfQinQVlanID:hpnicfQinQPrioritySwapOld,current,,An entry for configuring 802.1Q-in-Q inner VLAN priority swapping function for interfaces.
.1.3.6.1.4.1.11.2.14.11.15.2.69.1.6.1.1,HPN-ICF-QINQ-MIB::hpnicfQinQPrioritySwapOld,Integer32,not-accessible,,current,,The old priority of original 802.1Q packets. It is the priority of inner VLAN tag. Since the VLAN priority range is from 0 to 7, yet the index range is from 1 to 8. Thus, the actual priority value equals to the value that subtracts 1 from corresponding index value.
.1.3.6.1.4.1.11.2.14.11.15.2.69.1.6.1.2,HPN-ICF-QINQ-MIB::hpnicfQinQPrioritySwapNew,Integer32,read-create,,current,,The new priority of original 802.1Q packets. It is the priority of inner VLAN tag after swapped.
.1.3.6.1.4.1.11.2.14.11.15.2.69.1.6.1.3,HPN-ICF-QINQ-MIB::hpnicfQinQPrioritySwapRowStatus,INTEGER,read-create,,current,active(1):notInService(2):notReady(3):createAndGo(4):createAndWait(5):destroy(6),Operation status of this table entry.
.1.3.6.1.4.1.11.2.14.11.15.2.69.1.7,HPN-ICF-QINQ-MIB::hpnicfQinQIfConfigTable,,not-accessible,,current,,A table for configuring 802.1Q-in-Q functions for interfaces.
.1.3.6.1.4.1.11.2.14.11.15.2.69.1.7.1,HPN-ICF-QINQ-MIB::hpnicfQinQIfConfigEntry,,not-accessible,ifIndex,current,,An entry for configuring 802.1Q-in-Q functions for interfaces.
.1.3.6.1.4.1.11.2.14.11.15.2.69.1.7.1.1,HPN-ICF-QINQ-MIB::hpnicfQinQIfEthernetType,Integer32,read-create,,current,,Ethernet protocol type configuring for an interface.
.1.3.6.1.4.1.11.2.14.11.15.2.69.1.7.1.2,HPN-ICF-QINQ-MIB::hpnicfQinQIfSwitch,INTEGER,read-create,,current,enabled(1):disabled(2),Switch of 802.1Q-in-Q functions configuring for an interface.
.1.3.6.1.4.1.11.2.14.11.15.2.69.1.7.1.3,HPN-ICF-QINQ-MIB::hpnicfQinQIfRowStatus,INTEGER,read-create,,current,active(1):notInService(2):notReady(3):createAndGo(4):createAndWait(5):destroy(6),Operation status of this table entry.
.1.3.6.1.4.1.11.2.14.11.15.2.69.1.7.1.4,HPN-ICF-QINQ-MIB::hpnicfQinQIfServiceTPIDValue,Integer32,read-create,,current,,Service TPID value configured for an interface.
.1.3.6.1.4.1.11.2.14.11.15.2.69.1.7.1.5,HPN-ICF-QINQ-MIB::hpnicfQinQIfCustomerTPIDValue,Integer32,read-create,,current,,Customer TPID value configured for an interface.
.1.3.6.1.4.1.11.2.14.11.15.2.69.1.7.1.6,HPN-ICF-QINQ-MIB::hpnicfQinQIfUplinkSwitch,INTEGER,read-create,,current,enabled(1):disabled(2),Switch of the uplink 802.1Q-in-Q function for an interface.
.1.3.6.1.4.1.11.2.14.11.15.2.69.1.7.1.7,HPN-ICF-QINQ-MIB::hpnicfQinQIfDownlinkSwitch,INTEGER,read-create,,current,enabled(1):disabled(2),Switch of the downlink 802.1Q-in-Q function for an interface.
.1.3.6.1.4.1.11.2.14.11.15.2.70,HPN-ICF-OID-MIB::hpnicfTransceiver,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.2.70.1,HPN-ICF-TRANSCEIVER-INFO-MIB::hpnicfTransceiverInfoAdm,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.2.70.1.1,HPN-ICF-TRANSCEIVER-INFO-MIB::hpnicfTransceiverInfoTable,,not-accessible,,current,,This table show the information of transceiver on interface.
.1.3.6.1.4.1.11.2.14.11.15.2.70.1.1.1,HPN-ICF-TRANSCEIVER-INFO-MIB::hpnicfTransceiverInfoEntry,,not-accessible,ifIndex,current,,The entry of the hpnicfTransceiverInfoTable.
.1.3.6.1.4.1.11.2.14.11.15.2.70.1.1.1.1,HPN-ICF-TRANSCEIVER-INFO-MIB::hpnicfTransceiverHardwareType,OCTET,read-only,,current,,Hardware type of the interface, such as SM(single mode).
.1.3.6.1.4.1.11.2.14.11.15.2.70.1.1.1.2,HPN-ICF-TRANSCEIVER-INFO-MIB::hpnicfTransceiverType,OCTET,read-only,,current,,Type of the interface, such as SFP/XFP/GBIC.
.1.3.6.1.4.1.11.2.14.11.15.2.70.1.1.1.3,HPN-ICF-TRANSCEIVER-INFO-MIB::hpnicfTransceiverWaveLength,Integer32,read-only,,current,,Wave length of the interface, measured in nanometer.
.1.3.6.1.4.1.11.2.14.11.15.2.70.1.1.1.4,HPN-ICF-TRANSCEIVER-INFO-MIB::hpnicfTransceiverVendorName,OCTET,read-only,,current,,Vendor name of the interface.
.1.3.6.1.4.1.11.2.14.11.15.2.70.1.1.1.5,HPN-ICF-TRANSCEIVER-INFO-MIB::hpnicfTransceiverSerialNumber,OCTET,read-only,,current,,Serial number of the interface.
.1.3.6.1.4.1.11.2.14.11.15.2.70.1.1.1.6,HPN-ICF-TRANSCEIVER-INFO-MIB::hpnicfTransceiverFiberDiameterType,INTEGER,read-only,,current,fiber9(1):fiber50(2):fiber625(3):copper(4):unknown(65535),The diameter of the fiber, measured in micron. fiber9 - 9 micron multi-mode fiber fiber50 - 50 micron multi-mode fiber fiber625 - 62.5 micron multi-mode fiber copper - copper cable.
.1.3.6.1.4.1.11.2.14.11.15.2.70.1.1.1.7,HPN-ICF-TRANSCEIVER-INFO-MIB::hpnicfTransceiverTransferDistance,Integer32,read-only,,current,,The maximal distance which the interface could transmit, measured in meter.
.1.3.6.1.4.1.11.2.14.11.15.2.70.1.1.1.8,HPN-ICF-TRANSCEIVER-INFO-MIB::hpnicfTransceiverDiagnostic,INTEGER,read-only,,current,true(1):false(2),Indicating the digital diagnostic monitoring function .
.1.3.6.1.4.1.11.2.14.11.15.2.70.1.1.1.9,HPN-ICF-TRANSCEIVER-INFO-MIB::hpnicfTransceiverCurTXPower,Integer32,read-only,,current,,Indicating the current transmitted power . The unit is in hundredths of dBM.
.1.3.6.1.4.1.11.2.14.11.15.2.70.1.1.1.10,HPN-ICF-TRANSCEIVER-INFO-MIB::hpnicfTransceiverMaxTXPower,Integer32,read-only,,current,,Indicating the maximal transmitted power . The unit is in hundredths of dBM.
.1.3.6.1.4.1.11.2.14.11.15.2.70.1.1.1.11,HPN-ICF-TRANSCEIVER-INFO-MIB::hpnicfTransceiverMinTXPower,Integer32,read-only,,current,,Indicating the minimal transmitted power . The unit is in hundredths of dBM.
.1.3.6.1.4.1.11.2.14.11.15.2.70.1.1.1.12,HPN-ICF-TRANSCEIVER-INFO-MIB::hpnicfTransceiverCurRXPower,Integer32,read-only,,current,,Indicating the current received power . The unit is in hundredths of dBM.
.1.3.6.1.4.1.11.2.14.11.15.2.70.1.1.1.13,HPN-ICF-TRANSCEIVER-INFO-MIB::hpnicfTransceiverMaxRXPower,Integer32,read-only,,current,,Indicating the maximal received power . The unit is in hundredths of dBM.
.1.3.6.1.4.1.11.2.14.11.15.2.70.1.1.1.14,HPN-ICF-TRANSCEIVER-INFO-MIB::hpnicfTransceiverMinRXPower,Integer32,read-only,,current,,Indicating the minimal received power . The unit is in hundredths of dBM.
.1.3.6.1.4.1.11.2.14.11.15.2.70.1.1.1.15,HPN-ICF-TRANSCEIVER-INFO-MIB::hpnicfTransceiverTemperature,Integer32,read-only,,current,,Indicating the current temperature. The unit is Celsius centigrade.
.1.3.6.1.4.1.11.2.14.11.15.2.70.1.1.1.16,HPN-ICF-TRANSCEIVER-INFO-MIB::hpnicfTransceiverVoltage,Integer32,read-only,,current,,Indicating the current voltage . The unit is in hundredths of V
.1.3.6.1.4.1.11.2.14.11.15.2.70.1.1.1.17,HPN-ICF-TRANSCEIVER-INFO-MIB::hpnicfTransceiverBiasCurrent,Integer32,read-only,,current,,Indicating the current bias electric current . The unit is in hundredths of mA
.1.3.6.1.4.1.11.2.14.11.15.2.70.1.1.1.18,HPN-ICF-TRANSCEIVER-INFO-MIB::hpnicfTransceiverTempHiAlarm,Integer32,read-only,,current,,Transceiver temperature high alarm threshold limit in thousandths of degrees Celsius. As an example: 49120 is 49.120 degrees Celsius.
.1.3.6.1.4.1.11.2.14.11.15.2.70.1.1.1.19,HPN-ICF-TRANSCEIVER-INFO-MIB::hpnicfTransceiverTempLoAlarm,Integer32,read-only,,current,,Transceiver temperature low alarm threshold limit in thousandths of degrees Celsius. As an example: 49120 is 49.120 degrees Celsius.
.1.3.6.1.4.1.11.2.14.11.15.2.70.1.1.1.20,HPN-ICF-TRANSCEIVER-INFO-MIB::hpnicfTransceiverTempHiWarn,Integer32,read-only,,current,,Transceiver temperature high warning threshold limit in thousandths of degrees Celsius. As an example: 49120 is 49.120 degrees Celsius.
.1.3.6.1.4.1.11.2.14.11.15.2.70.1.1.1.21,HPN-ICF-TRANSCEIVER-INFO-MIB::hpnicfTransceiverTempLoWarn,Integer32,read-only,,current,,Transceiver temperature low warning threshold limit in thousandths of degrees Celsius. As an example: 49120 is 49.120 degrees Celsius.
.1.3.6.1.4.1.11.2.14.11.15.2.70.1.1.1.22,HPN-ICF-TRANSCEIVER-INFO-MIB::hpnicfTransceiverVccHiAlarm,Integer32,read-only,,current,,Transceiver VCC high alarm threshold limit in hundreds of microvolts. As an example: 32928 is 3.2928 volts. Returns zero if not supported on the transceiver.
.1.3.6.1.4.1.11.2.14.11.15.2.70.1.1.1.23,HPN-ICF-TRANSCEIVER-INFO-MIB::hpnicfTransceiverVccLoAlarm,Integer32,read-only,,current,,Transceiver VCC low alarm threshold limit in hundreds of microvolts. As an example: 32928 is 3.2928 volts. Returns zero if not supported on the transceiver.
.1.3.6.1.4.1.11.2.14.11.15.2.70.1.1.1.24,HPN-ICF-TRANSCEIVER-INFO-MIB::hpnicfTransceiverVccHiWarn,Integer32,read-only,,current,,Transceiver VCC high warning threshold limit in hundreds of microvolts. As an example: 32928 is 3.2928 volts. Returns zero if not supported on the transceiver.
.1.3.6.1.4.1.11.2.14.11.15.2.70.1.1.1.25,HPN-ICF-TRANSCEIVER-INFO-MIB::hpnicfTransceiverVccLoWarn,Integer32,read-only,,current,,Transceiver VCC low warning threshold limit in hundreds of microvolts. As an example: 32928 is 3.2928 volts. Returns zero if not supported on the transceiver.
.1.3.6.1.4.1.11.2.14.11.15.2.70.1.1.1.26,HPN-ICF-TRANSCEIVER-INFO-MIB::hpnicfTransceiverBiasHiAlarm,Integer32,read-only,,current,,Transceiver bias high alarm threshold limit in microamps.
.1.3.6.1.4.1.11.2.14.11.15.2.70.1.1.1.27,HPN-ICF-TRANSCEIVER-INFO-MIB::hpnicfTransceiverBiasLoAlarm,Integer32,read-only,,current,,Transceiver bias low alarm threshold limit in microamps.
.1.3.6.1.4.1.11.2.14.11.15.2.70.1.1.1.28,HPN-ICF-TRANSCEIVER-INFO-MIB::hpnicfTransceiverBiasHiWarn,Integer32,read-only,,current,,Transceiver bias high warning threshold limit in microamps.
.1.3.6.1.4.1.11.2.14.11.15.2.70.1.1.1.29,HPN-ICF-TRANSCEIVER-INFO-MIB::hpnicfTransceiverBiasLoWarn,Integer32,read-only,,current,,Transceiver bias low warning threshold limit in microamps.
.1.3.6.1.4.1.11.2.14.11.15.2.70.1.1.1.30,HPN-ICF-TRANSCEIVER-INFO-MIB::hpnicfTransceiverPwrOutHiAlarm,Integer32,read-only,,current,,Transceiver transmit power high alarm threshold limit in tenths of microwatts. As an example: 10000 is 1 milliwatt.
.1.3.6.1.4.1.11.2.14.11.15.2.70.1.1.1.31,HPN-ICF-TRANSCEIVER-INFO-MIB::hpnicfTransceiverPwrOutLoAlarm,Integer32,read-only,,current,,Transceiver transmit power low alarm threshold limit in tenths of microwatts. As an example: 10000 is 1 milliwatt.
.1.3.6.1.4.1.11.2.14.11.15.2.70.1.1.1.32,HPN-ICF-TRANSCEIVER-INFO-MIB::hpnicfTransceiverPwrOutHiWarn,Integer32,read-only,,current,,Transceiver transmit power high warning threshold limit in tenths of microwatts As an example: 10000 is 1 milliwatt.
.1.3.6.1.4.1.11.2.14.11.15.2.70.1.1.1.33,HPN-ICF-TRANSCEIVER-INFO-MIB::hpnicfTransceiverPwrOutLoWarn,Integer32,read-only,,current,,Transceiver transmit power low warning threshold limit in tenths of microwatts. As an example: 10000 is 1 milliwatt.
.1.3.6.1.4.1.11.2.14.11.15.2.70.1.1.1.34,HPN-ICF-TRANSCEIVER-INFO-MIB::hpnicfTransceiverRcvPwrHiAlarm,Integer32,read-only,,current,,Transceiver receive power high alarm threshold limit in tenths of microwatts. As an example: 10000 is 1 milliwatt.
.1.3.6.1.4.1.11.2.14.11.15.2.70.1.1.1.35,HPN-ICF-TRANSCEIVER-INFO-MIB::hpnicfTransceiverRcvPwrLoAlarm,Integer32,read-only,,current,,Transceiver receive power low alarm threshold limit in tenths of microwatts. As an example: 10000 is 1 milliwatt.
.1.3.6.1.4.1.11.2.14.11.15.2.70.1.1.1.36,HPN-ICF-TRANSCEIVER-INFO-MIB::hpnicfTransceiverRcvPwrHiWarn,Integer32,read-only,,current,,Transceiver receive power high warning threshold limit in tenths of microwatts. As an example: 10000 is 1 milliwatt.
.1.3.6.1.4.1.11.2.14.11.15.2.70.1.1.1.37,HPN-ICF-TRANSCEIVER-INFO-MIB::hpnicfTransceiverRcvPwrLoWarn,Integer32,read-only,,current,,Transceiver receive power low warning threshold limit in tenths of microwatts. As an example: 10000 is 1 milliwatt.
.1.3.6.1.4.1.11.2.14.11.15.2.70.1.1.1.38,HPN-ICF-TRANSCEIVER-INFO-MIB::hpnicfTransceiverErrors,BITS,read-only,,current,xcvrIOError(0):xcvrChecksum(1):xcvrTypeAndPortConfigMismatch(2):xcvrTypeNotSupported(3):wisLocalFault(4):rcvOpticalPowerFault(5):pmapmdReceiverLocalFault(6):pcsReceiveLocalFault(7):phyXSReceiveLocalFault(8):laserBiasCurrentFault(9):laserTemperatureFault(10):laserOutputPowerFault(11):txFault(12):pmapmdTransmitterLocalFault(13):pcsTransmitLocalFault(14):phyXSTransmitLocalFault(15):rxLossOfSignal(16),Bitmask indicating transceiver errors. Transceiver information I/O error(0) Transceiver information checksum error(1) Transceiver type and port configuration mismatch(2) Transceiver type not supported by port hardware(3) WIS local fault(4) Receive optical power fault(5) PMA/PMD receiver local fault(6) PCS receive local fault(7) PHY XS receive local fault(8) Laser bias current fault(9) Laser temperature fault(10) Laser output power fault(11) TX fault(12) PMA/PMD transmitter local fault(13) PCS transmit local fault(14) PHY XS Transmit Local Fault(15) RX loss of signal(16) Unused(17-31)
.1.3.6.1.4.1.11.2.14.11.15.2.70.1.2,HPN-ICF-TRANSCEIVER-INFO-MIB::hpnicfTransceiverChannelTable,,not-accessible,,current,,This table provides statistics about transceiver with multi-channel.
.1.3.6.1.4.1.11.2.14.11.15.2.70.1.2.1,HPN-ICF-TRANSCEIVER-INFO-MIB::hpnicfTransceiverChannelEntry,,not-accessible,ifIndex:hpnicfTransceiverChannelIndex,current,,The entry of the hpnicfTransceiverChannelTable.
.1.3.6.1.4.1.11.2.14.11.15.2.70.1.2.1.1,HPN-ICF-TRANSCEIVER-INFO-MIB::hpnicfTransceiverChannelIndex,Integer32,not-accessible,,current,,The channel index of transceiver. Indicating one channel of the interface.
.1.3.6.1.4.1.11.2.14.11.15.2.70.1.2.1.2,HPN-ICF-TRANSCEIVER-INFO-MIB::hpnicfTransceiverChannelCurTXPower,Integer32,read-only,,current,,Indicating the current transmission power. The unit is in hundredths of dBM.
.1.3.6.1.4.1.11.2.14.11.15.2.70.1.2.1.3,HPN-ICF-TRANSCEIVER-INFO-MIB::hpnicfTransceiverChannelCurRXPower,Integer32,read-only,,current,,Indicating the current received power. The unit is in hundredths of dBM.
.1.3.6.1.4.1.11.2.14.11.15.2.70.1.2.1.4,HPN-ICF-TRANSCEIVER-INFO-MIB::hpnicfTransceiverChannelTemperature,Integer32,read-only,,current,,Indicating the current temperature. The unit is Celsius centigrade.
.1.3.6.1.4.1.11.2.14.11.15.2.70.1.2.1.5,HPN-ICF-TRANSCEIVER-INFO-MIB::hpnicfTransceiverChannelBiasCurrent,Integer32,read-only,,current,,Indicating the current bias electric current. The unit is in hundredths of mA.
.1.3.6.1.4.1.11.2.14.11.15.2.71,HPN-ICF-OID-MIB::hpnicfIpv6AddrMIB,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.2.71.1,HPN-ICF-IPV6-ADDRESS-MIB::hpnicfIpv6AddressObjects,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.2.71.1.1,HPN-ICF-IPV6-ADDRESS-MIB::hpnicfIpv6AddressConfig,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.2.71.1.1.1,HPN-ICF-IPV6-ADDRESS-MIB::hpnicfIpv6AddrSetTable,,not-accessible,,current,,The table of address information is relevant to this entity's IPv6 addresses for setting. The address information that can be read and set in this table is a subset of the address information that can be read in hpnicfIpv6AddrReadTable and ipv6AddrTable in IPV6-MIB. This table is used to configure IPv6 addresses of an interface identified by hpnicfIpv6AddrSetIfIndex. When users create or delete an entry in this table, the agent also increases or reduces a corresponding entry in the hpnicfIpv6AddrReadTable and ipv6AddrTable in IPV6-MIB. When an interface which has been assigned IPv6 address is deleted, the agent also deletes the entry corresponding to the interface in this table and hpnicfIpv6AddrReadTable. All IPv6 addresses in this table will also show in ipv6AddrTable in IPV6-MIB.
.1.3.6.1.4.1.11.2.14.11.15.2.71.1.1.1.1,HPN-ICF-IPV6-ADDRESS-MIB::hpnicfIpv6AddrSetEntry,,not-accessible,hpnicfIpv6AddrSetIfIndex:hpnicfIpv6AddrSetAddrType:hpnicfIpv6AddrSetAddr,current,,Define the IPv6 address information.
.1.3.6.1.4.1.11.2.14.11.15.2.71.1.1.1.1.1,HPN-ICF-IPV6-ADDRESS-MIB::hpnicfIpv6AddrSetIfIndex,Integer32,not-accessible,,current,,The index value which uniquely identifies the interface to which this entry is applicable. The interface identified by a particular value of this index is the same interface as identified by the same value of RFC 1573's ifIndex.
.1.3.6.1.4.1.11.2.14.11.15.2.71.1.1.1.1.2,HPN-ICF-IPV6-ADDRESS-MIB::hpnicfIpv6AddrSetAddrType,INTEGER,not-accessible,,current,unknown(0):ipv4(1):ipv6(2):ipv4z(3):ipv6z(4):dns(16),The IP address type to which this entry's address information pertains. The value must be ipv6.
.1.3.6.1.4.1.11.2.14.11.15.2.71.1.1.1.1.3,HPN-ICF-IPV6-ADDRESS-MIB::hpnicfIpv6AddrSetAddr,OCTET,not-accessible,,current,,The IPv6 address to which this entry's address information pertains.
.1.3.6.1.4.1.11.2.14.11.15.2.71.1.1.1.1.4,HPN-ICF-IPV6-ADDRESS-MIB::hpnicfIpv6AddrSetPfxLength,Integer32,read-create,,current,,The length of the prefix (in bits) associated with the IPv6 address of this entry.
.1.3.6.1.4.1.11.2.14.11.15.2.71.1.1.1.1.5,HPN-ICF-IPV6-ADDRESS-MIB::hpnicfIpv6AddrSetSourceType,INTEGER,read-create,,current,assignedIp(1):assignedEUI64Ip(2):assignedLinklocalIp(3),Indicate the type of source of IPv6 address. The value can be one of following: 'assignedIp': Assigned global/site-local IPv6 address; 'assignedEUI64Ip': Assigned global/site-local IPv6 address by using EUI-64 interface identifier; 'assignedLinklocalIp': Assigned link-local IPv6 address. The value of hpnicfIpv6AddrSetSourceType is relevant to hpnicfIpv6AddrReadSourceType and hpnicfIpv6AddrReadCatalog . For example, if the value of hpnicfIpv6AddrSetSourceType is set to 'assignedIp', then the value of hpnicfIpv6AddrReadSourceType is 'assignedIp' and the value of hpnicfIpv6AddrReadCatalog is 'global' or 'sitelocal'. The relation listed in the following table. ---------------------------------------------------------------- hpnicfIpv6Addr- | hpnicfIpv6Addr- | hpnicfIpv6Addr- SetSourceType | ReadSourceType | ReadCatalog ---------------------------------------------------------------- assignedIp | assignedIp | global or sitelocal ---------------------------------------------------------------- assignedEUI64Ip | assignedEUI64Ip | global or sitelocal ---------------------------------------------------------------- assignedLinklocalIp | assignedIp | linklocal ---------------------------------------------------------------- 
.1.3.6.1.4.1.11.2.14.11.15.2.71.1.1.1.1.6,HPN-ICF-IPV6-ADDRESS-MIB::hpnicfIpv6AddrSetRowStatus,INTEGER,read-create,,current,active(1):notInService(2):notReady(3):createAndGo(4):createAndWait(5):destroy(6),This object is used to create a new row or delete an existing row in this table, only supports active(1), createAndGo(4) and destroy(6).
.1.3.6.1.4.1.11.2.14.11.15.2.71.1.1.2,HPN-ICF-IPV6-ADDRESS-MIB::hpnicfIpv6AddrReadTable,,not-accessible,,current,,The table of address information is relevant to this entity's IPv6 addresses for reading. This is the extension of the ipv6AddrTable in IPV6-MIB. All IPv6 addresses in this table will also show in ipv6AddrTable in IPV6-MIB.
.1.3.6.1.4.1.11.2.14.11.15.2.71.1.1.2.1,HPN-ICF-IPV6-ADDRESS-MIB::hpnicfIpv6AddrReadEntry,,not-accessible,hpnicfIpv6AddrReadIfIndex:hpnicfIpv6AddrReadAddrType:hpnicfIpv6AddrReadAddr,current,,Define the IPv6 address information.
.1.3.6.1.4.1.11.2.14.11.15.2.71.1.1.2.1.1,HPN-ICF-IPV6-ADDRESS-MIB::hpnicfIpv6AddrReadIfIndex,Integer32,not-accessible,,current,,The index value which uniquely identifies the interface to which this entry is applicable. The interface identified by a particular value of this index is the same interface as identified by the same value of RFC 1573's ifIndex.
.1.3.6.1.4.1.11.2.14.11.15.2.71.1.1.2.1.2,HPN-ICF-IPV6-ADDRESS-MIB::hpnicfIpv6AddrReadAddrType,INTEGER,not-accessible,,current,unknown(0):ipv4(1):ipv6(2):ipv4z(3):ipv6z(4):dns(16),The IP address type to which this entry's address information pertains. The value must be ipv6.
.1.3.6.1.4.1.11.2.14.11.15.2.71.1.1.2.1.3,HPN-ICF-IPV6-ADDRESS-MIB::hpnicfIpv6AddrReadAddr,OCTET,not-accessible,,current,,The IPv6 address to which this entry's address information pertains.
.1.3.6.1.4.1.11.2.14.11.15.2.71.1.1.2.1.4,HPN-ICF-IPV6-ADDRESS-MIB::hpnicfIpv6AddrReadPfxLength,Integer32,read-only,,current,,The length of the prefix (in bits) associated with the IPv6 address of this entry.
.1.3.6.1.4.1.11.2.14.11.15.2.71.1.1.2.1.5,HPN-ICF-IPV6-ADDRESS-MIB::hpnicfIpv6AddrReadSourceType,INTEGER,read-only,,current,assignedIp(1):assignedEUI64Ip(2):assignedAutoIp(3):autoIp(4):dhcpv6(5):negotiate(6):cluster(7),Indicate the type of source of IPv6 address. The value can be one of following: 'assignedIp': Assigned IPv6 address; 'assignedEUI64Ip': Assigned IPv6 address by using EUI-64 interface identifier; 'assignedAutoIp': Auto generated IPv6 address by user setting; 'autoIp': Auto generated IPv6 address as a result of non-linklocal anycast/unicast address configuration; 'dhcpv6': Assigned IPv6 address through DHCPv6 protocol; 'negotiate': Assigned IPv6 address through negotiation; 'cluster': Assigned IPv6 address through cluster module.
.1.3.6.1.4.1.11.2.14.11.15.2.71.1.1.2.1.6,HPN-ICF-IPV6-ADDRESS-MIB::hpnicfIpv6AddrReadCatalog,INTEGER,read-only,,current,nodelocal(1):linklocal(2):sitelocal(3):orglocal(4):global(5),Indicate the category of the IPv6 address. The value can be one of following: 'nodelocal': node-local scope; 'linklocal': link-local scope; 'sitelocal': site-local scope; 'orglocal': organization-local scope; 'global': global scope. 
.1.3.6.1.4.1.11.2.14.11.15.2.72,HPN-ICF-OID-MIB::hpnicfBfdMIB,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.2.72.0,HPN-ICF-BFD-STD-MIB::hpnicfBfdNotifications,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.2.72.0.1,HPN-ICF-BFD-STD-MIB::hpnicfBfdSessStateChange,,,,,,A notification sent when a session changes state, entering state up or entering state down. The session will enter state up finishing three times handshakes , and will enter state down when the communication path is out of work. When the hpnicfBfdSessState's value is state up, the session enters state up, and the session enters state down when the hpnicfBfdSessState's value is state down. The hpnicfBfdSessIfIndex contains an interface's index under which the BFD session runs. The hpnicfBfdSessIndex contains an index which represents a unique BFD session on this device. The hpnicfBfdSessState is the state of the running BFD session. 
.1.3.6.1.4.1.11.2.14.11.15.2.72.0.2,HPN-ICF-BFD-STD-MIB::hpnicfBfdSessAuthFail,,,,,,A notification sent when receiving a session with an authentication fail. The hpnicfBfdIfIndex is an index which represents a unique BFD interface on this device. 
.1.3.6.1.4.1.11.2.14.11.15.2.72.0.3,HPN-ICF-BFD-STD-MIB::hpnicfBfdSessStateUp,,,,,,A notification sent when a session changes state to up. The session will enter state up finishing three times handshakes. The hpnicfBfdSessIfIndex contains an interface's index under which the BFD session runs. The hpnicfBfdSessIndex contains an index which represents a unique BFD session on this device. The hpnicfBfdSessState is the state of the running BFD session.
.1.3.6.1.4.1.11.2.14.11.15.2.72.0.4,HPN-ICF-BFD-STD-MIB::hpnicfBfdSessStateDown,,,,,,A notification sent when a session changes state to down. The session will enter state down when the communication path is out of work. The hpnicfBfdSessIfIndex contains an interface's index under which the BFD session runs. The hpnicfBfdSessIndex contains an index which represents a unique BFD session on this device. The hpnicfBfdSessState is the state of the running BFD session.
.1.3.6.1.4.1.11.2.14.11.15.2.72.0.5,HPN-ICF-BFD-STD-MIB::hpnicfBfdSessReachLimit,,,,,,A notification would be sent when the number of active BFD sessions reached this device's upper limit and no more session could be activated. The hpnicfBfdSessNumberLimit is the active session limit of this device.
.1.3.6.1.4.1.11.2.14.11.15.2.72.1,HPN-ICF-BFD-STD-MIB::hpnicfBfdObjects,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.2.72.1.1,HPN-ICF-BFD-STD-MIB::hpnicfBfdGlobalObjects,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.2.72.1.1.1,HPN-ICF-BFD-STD-MIB::hpnicfBfdVersionNumber,Unsigned32,read-only,,current,,It indicates the BFD session's current version number.
.1.3.6.1.4.1.11.2.14.11.15.2.72.1.1.2,HPN-ICF-BFD-STD-MIB::hpnicfBfdSysInitMode,INTEGER,read-write,,current,active(1):passive(2),A system may take either an active role or a passive role in session initialization. A system taking the active role must send BFD control packets for a particular session, regardless of whether it has received any BFD packets for that session. A system taking the passive role must not begin sending BFD packets for a particular session until it has received a BFD packet for that session, and thus has learned the remote system's discriminator value.
.1.3.6.1.4.1.11.2.14.11.15.2.72.1.1.3,HPN-ICF-BFD-STD-MIB::hpnicfBfdSessNotificationsEnable,INTEGER,read-write,,current,true(1):false(2),This variable enables the emission of hpnicfBfdSessStateUp hpnicfBfdSessStateDown and hpnicfBfdSessReachLimit notifications if this variable is set to true(1); otherwise these notifications are not emitted.
.1.3.6.1.4.1.11.2.14.11.15.2.72.1.1.4,HPN-ICF-BFD-STD-MIB::hpnicfBfdSessNumberLimit,Unsigned32,read-only,,current,,This variable is the active session limit of this device.
.1.3.6.1.4.1.11.2.14.11.15.2.72.1.2,HPN-ICF-BFD-STD-MIB::hpnicfBfdIfTable,,not-accessible,,current,,This Table describes the BFD interface specific information.
.1.3.6.1.4.1.11.2.14.11.15.2.72.1.2.1,HPN-ICF-BFD-STD-MIB::hpnicfBfdIfEntry,,not-accessible,hpnicfBfdIfIndex,current,,This Entry describes the BFD interface specific information.
.1.3.6.1.4.1.11.2.14.11.15.2.72.1.2.1.1,HPN-ICF-BFD-STD-MIB::hpnicfBfdIfIndex,Integer32,accessible-for-notify,,current,,This variable contains an index that represents a unique BFD interface on this device.
.1.3.6.1.4.1.11.2.14.11.15.2.72.1.2.1.2,HPN-ICF-BFD-STD-MIB::hpnicfBfdIfDesiredMinTxInterval,Unsigned32,read-write,,current,,This variable defines the minimum interval, in microseconds, that the interface would like to use when transmitting BFD Control packets.
.1.3.6.1.4.1.11.2.14.11.15.2.72.1.2.1.3,HPN-ICF-BFD-STD-MIB::hpnicfBfdIfDesiredMinRxInterval,Unsigned32,read-write,,current,,This variable defines the minimum interval, in, microseconds, between received BFD Control packets the local system is capable of supporting.
.1.3.6.1.4.1.11.2.14.11.15.2.72.1.2.1.4,HPN-ICF-BFD-STD-MIB::hpnicfBfdIfDetectMult,Unsigned32,read-write,,current,,The desired detect time multiplier for BFD control packets. The negotiated control packet transmission interval, multiplied by this variable, will be the detection time for this session (as seen by the remote system.) The variable must be a nonzero integer.
.1.3.6.1.4.1.11.2.14.11.15.2.72.1.2.1.5,HPN-ICF-BFD-STD-MIB::hpnicfBfdIfAuthType,INTEGER,read-only,,current,none(1):simple(2):md5(3):mmd5(4):sha1(5):msha1(6),The Authentication Type used for this interface. This field is valid only when the Authentication Present bit is set. The 'none' indicates the session doesn't support authentication. The 'simple' indicates the session supports simple password authentication. The 'md5' indicates the session supports Keyed MD5 authentication. The 'mmd5' indicates the session supports Meticulous Keyed MD5 authentication. The 'sha1' indicates the session supports Keyed SHA1 authentication. The 'msha1' indicates the session supports Meticulous Keyed SHA1 authentication.
.1.3.6.1.4.1.11.2.14.11.15.2.72.1.3,HPN-ICF-BFD-STD-MIB::hpnicfBfdSessTable,,not-accessible,,current,,This table describes the BFD sessions.
.1.3.6.1.4.1.11.2.14.11.15.2.72.1.3.1,HPN-ICF-BFD-STD-MIB::hpnicfBfdSessEntry,,not-accessible,hpnicfBfdSessIfIndex:hpnicfBfdSessIndex,current,,This Entry describes the BFD sessions.
.1.3.6.1.4.1.11.2.14.11.15.2.72.1.3.1.1,HPN-ICF-BFD-STD-MIB::hpnicfBfdSessIfIndex,Integer32,accessible-for-notify,,current,,This variable contains an interface's index under which the BFD session runs.
.1.3.6.1.4.1.11.2.14.11.15.2.72.1.3.1.2,HPN-ICF-BFD-STD-MIB::hpnicfBfdSessIndex,Unsigned32,accessible-for-notify,,current,,This variable contains an index which represents a unique BFD session on this device.
.1.3.6.1.4.1.11.2.14.11.15.2.72.1.3.1.3,HPN-ICF-BFD-STD-MIB::hpnicfBfdSessAppSupportId,BITS,read-only,,current,none(0):ospf(1):isis(2):bgp(3):mpls(4),This variable contains an ID used to indicate a local application which owns or maintains this BFD session. Note, a BFD session can support several route protocols. This is a bit-map of possible conditions. The corresponding bit positions are: |0 |none | |1 |ospf | |2 |isis | |3 |bgp | |4 |mpls | 
.1.3.6.1.4.1.11.2.14.11.15.2.72.1.3.1.4,HPN-ICF-BFD-STD-MIB::hpnicfBfdSessLocalDiscr,Unsigned32,read-only,,current,,This variable defines the local discriminator for this BFD session, used to uniquely identify it.
.1.3.6.1.4.1.11.2.14.11.15.2.72.1.3.1.5,HPN-ICF-BFD-STD-MIB::hpnicfBfdSessRemoteDiscr,Unsigned32,read-only,,current,,This variable defines the session discriminator chosen by the remote system for this BFD session.
.1.3.6.1.4.1.11.2.14.11.15.2.72.1.3.1.6,HPN-ICF-BFD-STD-MIB::hpnicfBfdSessDstPort,Unsigned32,read-only,,current,,The UDP Port for BFD. The default value is the well-known value for this port.
.1.3.6.1.4.1.11.2.14.11.15.2.72.1.3.1.7,HPN-ICF-BFD-STD-MIB::hpnicfBfdSessOperMode,INTEGER,read-only,,current,asynchModeWOEchoFun(1):demandModeWOEchoFunction(2):asyncModeWEchoFun(3):demandModeWEchoFunction(4),This variable defines current operating mode that BFD session is running in. The primary mode which the BFD session runs in is known as Asynchronous mode. In this mode, the systems periodically send BFD Control packets to one another, and if a number of those packets in a row are not received by the other system, the session is declared to be down. The second mode is known as Demand mode. In this mode, it is assumed that each system has an independent way of verifying that it has connectivity to the other system. Once a BFD session is established, the systems stop sending BFD Control packets, except when either system feels the need to verify connectivity explicitly, in which case a short sequence of BFD Control packets is sent, and then the protocol quiesces. An adjunct to both modes is the Echo function. When the Echo function is active, a stream of BFD Echo packets is transmitted in such a way as to have the other system loop them back through its forwarding path. If a number of packets of the echoed data stream are not received, the session is declared to be down. The Echo function may be used with either Asynchronous or Demand modes. The 'asynchModeWOEchoFun' indicates this BFD session operates in the Asynchronous mode, and doesn't support the Echo Function. The 'demandModeWOEchoFunction' indicates this BFD session operates in the Demand mode, and doesn't support the Echo Function. The 'asyncModeWEchoFun' indicates this BFD session operates in the Asynchronous mode, and also supports the Echo Function. The 'demandModeWEchoFunction' indicates this BFD session operates in the Demand mode, and also supports the Echo Function.
.1.3.6.1.4.1.11.2.14.11.15.2.72.1.3.1.8,HPN-ICF-BFD-STD-MIB::hpnicfBfdSessAddrType,INTEGER,read-only,,current,unknown(0):ipv4(1):ipv6(2):ipv4z(3):ipv6z(4):dns(16),This object defines IP address type of the interface associated with this BFD session. Only values unknown(0), ipv4(1) or ipv6(2) have to be supported. A value of unknown(0) is allowed only when the outgoing interface is of type point-to-point, or when the BFD session is not associated with a specific interface. If any other unsupported values are attempted in a set operation, the agent must return an inconsistentValue error.
.1.3.6.1.4.1.11.2.14.11.15.2.72.1.3.1.9,HPN-ICF-BFD-STD-MIB::hpnicfBfdSessLocalAddr,OCTET,read-only,,current,,This variable defines IP address of the local interface from which the BFD packets is transmitted. It can also be used to enabled BFD on a specific interface. The value is set to zero when BFD session is not associated with a specific interface.
.1.3.6.1.4.1.11.2.14.11.15.2.72.1.3.1.10,HPN-ICF-BFD-STD-MIB::hpnicfBfdSessRemoteAddr,OCTET,read-only,,current,,This variable defines IP address of the remote interface from which the BFD packets is transmitted. It can also be used to enabled BFD on a specific interface. The value is set to zero when BFD session is not associated with a specific interface.
.1.3.6.1.4.1.11.2.14.11.15.2.72.1.3.1.11,HPN-ICF-BFD-STD-MIB::hpnicfBfdSessLocalDiag,INTEGER,read-only,,current,noDiagnostic(1):controlDetectionTimeExpired(2):echoFunctionFailed(3):neighborSignaledSessionDown(4):forwardingPlaneReset(5):pathDown(6):concatenatedPathDown(7):administrativelyDown(8):reverseConcatenatedPathDown(9),The BFD diagnostic code for the BFD session was down with the neighbor. If no such event happens this object contains a zero value.
.1.3.6.1.4.1.11.2.14.11.15.2.72.1.3.1.12,HPN-ICF-BFD-STD-MIB::hpnicfBfdSessState,INTEGER,read-only,,current,adminDown(0):down(1):init(2):up(3),The state of the running BFD session. There are three states through which a session normally proceeds, two for establishing a session (Init and Up) and one for tearing down a session (Down.) This allows a three-way handshake for both session establishment and session teardown (assuring that both systems are aware of all session state changes.) A fourth state (AdminDown) exists so that a session can be administratively put down indefinitely. The Down state means that the session is down (or has just been created.) A session remains in Down state until the remote system indicates that it agrees that the session is down by sending a BFD Control packet with the State field set to anything other than Up. If that packet signals Down state, the session advances to Init state; if that packet signals Init state, the session advances to Up state. Init state means that the remote system is 0communicating, and the local system desires to bring the session up, but the remote system does not yet realize it. A session will remain in Init state until either a BFD Control Packet is received that is signaling Init or Up state (in which case the session advances to Up state) or until the detection time expires, meaning that communication with the remote system has been lost (in which case the session advances to Down state.) Up state means that the BFD session has successfully been established, and implies that connectivity between the systems is working. The session will remain in the Up state until either connectivity fails, or the session is taken down administratively. If either the remote system signals Down state, or the detection time expires, the session advances to Down state. AdminDown state means that the session is being held administratively down. This causes the remote system to enter Down state, and remain there until the local system exits AdminDown state.
.1.3.6.1.4.1.11.2.14.11.15.2.72.1.3.1.13,HPN-ICF-BFD-STD-MIB::hpnicfBfdSessControlPlanIndepFlag,INTEGER,read-only,,current,true(1):false(2),This variable indicates whether the local system can continue to work while the control plane is out of work. Specifically, it is set to true(1) if the local system is independent of the control plane. Otherwise, the value is set to false(0)
.1.3.6.1.4.1.11.2.14.11.15.2.72.1.3.1.14,HPN-ICF-BFD-STD-MIB::hpnicfBfdSessAuthFlag,INTEGER,read-only,,current,true(1):false(2),This variable indicates that the local system wants to use Authentication. Specifically, it is set to true(1) if the local system wishes the session to be authenticated or false(0) if not.
.1.3.6.1.4.1.11.2.14.11.15.2.72.1.3.1.15,HPN-ICF-BFD-STD-MIB::hpnicfBfdSessDemandModeFlag,INTEGER,read-only,,current,true(1):false(2),This variable indicates that the local system wants to use Demand mode. Specifically, it is set to true(1) if the local system wishes to use Demand mode or false(0) if not
.1.3.6.1.4.1.11.2.14.11.15.2.72.1.4,HPN-ICF-BFD-STD-MIB::hpnicfBfdSessStatTable,,not-accessible,,current,,The table defines BFD session state.
.1.3.6.1.4.1.11.2.14.11.15.2.72.1.4.1,HPN-ICF-BFD-STD-MIB::hpnicfBfdSessStatEntry,,not-accessible,,current,,An entry in this table is created by a BFD-enabled node for every BFD Session. It defines BFD session statistics.
.1.3.6.1.4.1.11.2.14.11.15.2.72.1.4.1.1,HPN-ICF-BFD-STD-MIB::hpnicfBfdSessStatPktInHC,Counter64,read-only,,current,,The total number of BFD messages received by this BFD session.
.1.3.6.1.4.1.11.2.14.11.15.2.72.1.4.1.2,HPN-ICF-BFD-STD-MIB::hpnicfBfdSessStatPktOutHC,Counter64,read-only,,current,,The total number of BFD messages sent by this BFD session.
.1.3.6.1.4.1.11.2.14.11.15.2.72.1.4.1.3,HPN-ICF-BFD-STD-MIB::hpnicfBfdSessStatDownCount,Counter32,read-only,,current,,The number of times this session has gone into the Down state since the router last rebooted.
.1.3.6.1.4.1.11.2.14.11.15.2.72.1.4.1.4,HPN-ICF-BFD-STD-MIB::hpnicfBfdSessStatPktDiscard,Counter64,read-only,,current,,The number of packets the local system has discarded since the router last rebooted.
.1.3.6.1.4.1.11.2.14.11.15.2.72.1.4.1.5,HPN-ICF-BFD-STD-MIB::hpnicfBfdSessStatPktLost,Counter64,read-only,,current,,The number of packets the local system has failed to transmit since the router last rebooted.
.1.3.6.1.4.1.11.2.14.11.15.2.72.1.5,HPN-ICF-BFD-STD-MIB::hpnicfBfdSessPerfTable,,not-accessible,,current,,The table defines BFD session performance.
.1.3.6.1.4.1.11.2.14.11.15.2.72.1.5.1,HPN-ICF-BFD-STD-MIB::hpnicfBfdSessPerfEntry,,not-accessible,,current,,An entry in this table is created by a BFD-enabled node for every BFD session. It defines BFD Session performance.
.1.3.6.1.4.1.11.2.14.11.15.2.72.1.5.1.1,HPN-ICF-BFD-STD-MIB::hpnicfBfdSessPerfCreatTime,TimeTicks,read-only,,current,,The value of sysUpTime when the session was created. If no such create event exists this object contains a zero value.
.1.3.6.1.4.1.11.2.14.11.15.2.72.1.5.1.2,HPN-ICF-BFD-STD-MIB::hpnicfBfdSessPerfLastUpTime,TimeTicks,read-only,,current,,The value of sysUpTime when the last time communication was lost. If no such up event exists this variable contains a zero value.
.1.3.6.1.4.1.11.2.14.11.15.2.72.1.5.1.3,HPN-ICF-BFD-STD-MIB::hpnicfBfdSessPerfLastDownTime,TimeTicks,read-only,,current,,The value of sysUpTime when the last time communication was lost with the neighbor. If no such event exist this variable contains a zero value.
.1.3.6.1.4.1.11.2.14.11.15.2.72.2,HPN-ICF-BFD-STD-MIB::hpnicfBfdConformance,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.2.73,HPN-ICF-OID-MIB::hpnicfRCP,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.2.73.1,HPN-ICF-RCP-MIB::hpnicfRCPMIB,,,,,,The MIB module is used for managing RCP protocol server.
.1.3.6.1.4.1.11.2.14.11.15.2.73.1.1,HPN-ICF-RCP-MIB::hpnicfRCPLeaf,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.2.73.1.1.1,HPN-ICF-RCP-MIB::hpnicfRCPServerEnableStatus,INTEGER,read-write,,current,true(1):false(2),This attribute controls the system wide operation of RCP server. The value TRUE means that the RCP server is enabled. The value FALSE means that the RCP server is disabled.
.1.3.6.1.4.1.11.2.14.11.15.2.73.1.1.2,HPN-ICF-RCP-MIB::hpnicfRCPConnTimeout,Integer32,read-write,,current,,Specifies the maximum time in seconds that a RCP client connection is idle.
.1.3.6.1.4.1.11.2.14.11.15.2.73.1.1.3,HPN-ICF-RCP-MIB::hpnicfRCPRuleTimeout,Integer32,read-write,,current,,Specifies the time in seconds before a RCP rule is aged out. If its value is 0, it indicates RCP rule will not be aged out.
.1.3.6.1.4.1.11.2.14.11.15.2.73.1.1.4,HPN-ICF-RCP-MIB::hpnicfRCPServerMaxConn,Integer32,read-write,,current,,Specifies the maximum number of clients that permitted to connect with RCP server at the same time.
.1.3.6.1.4.1.11.2.14.11.15.2.73.1.1.5,HPN-ICF-RCP-MIB::hpnicfRCPServerCurConn,Integer32,read-only,,current,,The current actual number of clients that connecting with RCP server.
.1.3.6.1.4.1.11.2.14.11.15.2.73.1.1.6,HPN-ICF-RCP-MIB::hpnicfRCPConnTimeoutMaxValue,Integer32,read-only,,current,,Specifies the maximum value of hpnicfRCPConnTimeout.
.1.3.6.1.4.1.11.2.14.11.15.2.73.1.1.7,HPN-ICF-RCP-MIB::hpnicfRCPRuleTimeoutMaxValue,Integer32,read-only,,current,,Specifies the maximum value of hpnicfRCPRuleTimeout.
.1.3.6.1.4.1.11.2.14.11.15.2.73.1.1.8,HPN-ICF-RCP-MIB::hpnicfRCPServerMaxConnMaxValue,Integer32,read-only,,current,,Specifies the maximum value of hpnicfRCPServerMaxConn.
.1.3.6.1.4.1.11.2.14.11.15.2.73.1.1.9,HPN-ICF-RCP-MIB::hpnicfRCPBalanceGroupIdMinValue,Integer32,read-only,,current,,Specifies the minimum value of balance group identity.
.1.3.6.1.4.1.11.2.14.11.15.2.73.1.1.10,HPN-ICF-RCP-MIB::hpnicfRCPBalanceGroupIdMaxValue,Integer32,read-only,,current,,Specifies the maximum value of balance group identity.
.1.3.6.1.4.1.11.2.14.11.15.2.73.1.1.11,HPN-ICF-RCP-MIB::hpnicfRCPTotalUsers,Integer32,read-only,,current,,Specifies the total number of RCP user.
.1.3.6.1.4.1.11.2.14.11.15.2.73.1.1.12,HPN-ICF-RCP-MIB::hpnicfRCPTotalClientIPs,Integer32,read-only,,current,,Specifies the total number of RCP client IP.
.1.3.6.1.4.1.11.2.14.11.15.2.73.1.2,HPN-ICF-RCP-MIB::hpnicfRCPTable,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.2.73.1.2.1,HPN-ICF-RCP-MIB::hpnicfRCPUserTable,,not-accessible,,current,,RCP User Info Table.
.1.3.6.1.4.1.11.2.14.11.15.2.73.1.2.1.1,HPN-ICF-RCP-MIB::hpnicfRCPUserEntry,,not-accessible,hpnicfRCPUserName,current,,The entry of hpnicfRCPUserTable.
.1.3.6.1.4.1.11.2.14.11.15.2.73.1.2.1.1.1,HPN-ICF-RCP-MIB::hpnicfRCPUserName,OCTET,not-accessible,,current,,The name of RCP user.
.1.3.6.1.4.1.11.2.14.11.15.2.73.1.2.1.1.2,HPN-ICF-RCP-MIB::hpnicfRCPUserPassword,OCTET,read-create,,current,, The password of RCP user. It is invisible to users and displayed as '***'.
.1.3.6.1.4.1.11.2.14.11.15.2.73.1.2.1.1.3,HPN-ICF-RCP-MIB::hpnicfRCPUserRedirectInterface,Integer32,read-create,,current,,The redirect interface index of RCP user. The RCP rule assigned by the user can be associated with the redirect interface. If the redirect interface is invalid, its value is set to be 0.
.1.3.6.1.4.1.11.2.14.11.15.2.73.1.2.1.1.4,HPN-ICF-RCP-MIB::hpnicfRCPUserRedirectBalanceGroup,Integer32,read-create,,current,,The redirect balance group identity of RCP user. The RCP rule assigned by the user can be associated with the redirect balance group. If the balance group is invalid, its value is set to be 0.
.1.3.6.1.4.1.11.2.14.11.15.2.73.1.2.1.1.5,HPN-ICF-RCP-MIB::hpnicfRCPUserRowStatus,INTEGER,read-create,,current,active(1):notInService(2):notReady(3):createAndGo(4):createAndWait(5):destroy(6),This manages the creation and deletion of rows, and shows the current status of the indexed user name. This object has the following values. active(1) The indexed user name is configured on the device. notInService(2) Not Supported. notReady(3) Not Supported. createAndGo(4) Create a new user. createAndWait(5) Not Supported. destroy(6) Delete this entry. The associated entry can be modified when the value of hpnicfRCPUserRowStatus is active(1). When deleting an inexistence entry, return noError.
.1.3.6.1.4.1.11.2.14.11.15.2.73.1.2.2,HPN-ICF-RCP-MIB::hpnicfRCPClientIPTable,,not-accessible,,current,,RCP Client IP Table.
.1.3.6.1.4.1.11.2.14.11.15.2.73.1.2.2.1,HPN-ICF-RCP-MIB::hpnicfRCPClientIPEntry,,not-accessible,hpnicfRCPClientIPType:hpnicfRCPClientIP,current,,The entry of hpnicfRCPClientIPTable.
.1.3.6.1.4.1.11.2.14.11.15.2.73.1.2.2.1.1,HPN-ICF-RCP-MIB::hpnicfRCPClientIPType,INTEGER,not-accessible,,current,unknown(0):ipv4(1):ipv6(2):ipv4z(3):ipv6z(4):dns(16),The IP address type (IPv4 or IPv6) of RCP client.
.1.3.6.1.4.1.11.2.14.11.15.2.73.1.2.2.1.2,HPN-ICF-RCP-MIB::hpnicfRCPClientIP,OCTET,not-accessible,,current,,The IP address of RCP client.
.1.3.6.1.4.1.11.2.14.11.15.2.73.1.2.2.1.3,HPN-ICF-RCP-MIB::hpnicfRCPClientIPRowStatus,INTEGER,read-create,,current,active(1):notInService(2):notReady(3):createAndGo(4):createAndWait(5):destroy(6),This manages the creation and deletion or rows, and shows the current status of the indexed client IP address. This object has the following values. active(1) The indexed client IP is configured on the device. notInService(2) Not Supported. notReady(3) Not Supported. createAndGo(4) Create a new client IP. createAndWait(5) Not Supported. destroy(6) Delete this entry. The associated entry can be modified when the value of hpnicfRCPClientIPRowStatus is active(1). When deleting an inexistence entry, return noError.
.1.3.6.1.4.1.11.2.14.11.15.2.73.1.2.3,HPN-ICF-RCP-MIB::hpnicfRCPSessionTable,,not-accessible,,current,,RCP session Table.
.1.3.6.1.4.1.11.2.14.11.15.2.73.1.2.3.1,HPN-ICF-RCP-MIB::hpnicfRCPSessionEntry,,not-accessible,hpnicfRCPSessionId,current,,The entry of hpnicfRCPSessionTable.
.1.3.6.1.4.1.11.2.14.11.15.2.73.1.2.3.1.1,HPN-ICF-RCP-MIB::hpnicfRCPSessionId,Integer32,not-accessible,,current,,RCP session identity.
.1.3.6.1.4.1.11.2.14.11.15.2.73.1.2.3.1.2,HPN-ICF-RCP-MIB::hpnicfRCPSessionClientIPType,INTEGER,read-only,,current,unknown(0):ipv4(1):ipv6(2):ipv4z(3):ipv6z(4):dns(16),The IP address type (IPv4 or IPv6) of RCP client.
.1.3.6.1.4.1.11.2.14.11.15.2.73.1.2.3.1.3,HPN-ICF-RCP-MIB::hpnicfRCPSessionClientIP,OCTET,read-only,,current,,RCP client IP address.
.1.3.6.1.4.1.11.2.14.11.15.2.73.1.2.3.1.4,HPN-ICF-RCP-MIB::hpnicfRCPSessionRunningStatus,INTEGER,read-only,,current,connected(1):operational(2),RCP server running status. It is one of the following status: connected: The connection is established and the RCP client is waiting for authentication. operational: The RCP client is authenticated and the server is ready for rule configuration request.
.1.3.6.1.4.1.11.2.14.11.15.2.73.1.2.3.1.5,HPN-ICF-RCP-MIB::hpnicfRCPSessionUserName,OCTET,read-only,,current,,RCP user name.
.1.3.6.1.4.1.11.2.14.11.15.2.74,HPN-ICF-OID-MIB::hpnicfAcfp,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.2.74.1,HPN-ICF-ACFP-MIB::hpnicfAcfpObjects,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.2.74.1.1,HPN-ICF-ACFP-MIB::hpnicfAcfpOAP,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.2.74.1.1.1,HPN-ICF-ACFP-MIB::hpnicfAcfpServer,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.2.74.1.1.1.1,HPN-ICF-ACFP-MIB::hpnicfAcfpServerInfo,BITS,read-only,,current,ipserver(0):redirect(1):mirror(2):passThrough(3),When retrieved, this object returns a set of bits indicating the capabilities (or configuration) of the switch or router. The set bit is indication that a router or switch can support the action for security rule.
.1.3.6.1.4.1.11.2.14.11.15.2.74.1.1.1.2,HPN-ICF-ACFP-MIB::hpnicfAcfpServerMaxLifetime,Integer32,read-only,,current,,When retrieved, this object returns the maximum lifetime in seconds, that this router or switch allows policy rules to have.
.1.3.6.1.4.1.11.2.14.11.15.2.74.1.1.1.3,HPN-ICF-ACFP-MIB::hpnicfAcfpServerPersistentRules,INTEGER,read-only,,current,true(1):false(2),When retrieved, this object returns true(1) if the ACFP MIB implementation can store policy rules persistently. Otherwise, it returns false(2).
.1.3.6.1.4.1.11.2.14.11.15.2.74.1.1.1.4,HPN-ICF-ACFP-MIB::hpnicfAcfpServerCurContextType,INTEGER,read-only,,current,no-context(1):context-VLANID(2):context-HG(3):context-FlowID(4):context-HGPlus(5),In some circumstances, it's necessary that packets go to ACFP client with context from ACFP server. However, the context perhaps is different. hpnicfAcfpServerCurContextType is used to distinguish this difference, ACFP client may process distinctively.
.1.3.6.1.4.1.11.2.14.11.15.2.74.1.1.2,HPN-ICF-ACFP-MIB::hpnicfAcfpClientInfo,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.2.74.1.1.2.1,HPN-ICF-ACFP-MIB::hpnicfAcfpClientInfoTable,,not-accessible,,current,,This table contains the basic information about ACFP client.
.1.3.6.1.4.1.11.2.14.11.15.2.74.1.1.2.1.1,HPN-ICF-ACFP-MIB::hpnicfAcfpClientInfoEntry,,not-accessible,hpnicfAcfpClientID,current,,This list contains the basic information about ACFP client.
.1.3.6.1.4.1.11.2.14.11.15.2.74.1.1.2.1.1.1,HPN-ICF-ACFP-MIB::hpnicfAcfpClientID,Integer32,accessible-for-notify,,current,,The identifier of ACFP client.
.1.3.6.1.4.1.11.2.14.11.15.2.74.1.1.2.1.1.2,HPN-ICF-ACFP-MIB::hpnicfAcfpClientDescription,OCTET,read-create,,current,,Description of the application that is running on ACFP client, eg. IPS, VCX.
.1.3.6.1.4.1.11.2.14.11.15.2.74.1.1.2.1.1.3,HPN-ICF-ACFP-MIB::hpnicfAcfpClientHwVersion,OCTET,read-create,,current,,The hardware revision of ACFP client.
.1.3.6.1.4.1.11.2.14.11.15.2.74.1.1.2.1.1.4,HPN-ICF-ACFP-MIB::hpnicfAcfpClientOSVersion,OCTET,read-create,,current,,The operating system version running ACFP client.
.1.3.6.1.4.1.11.2.14.11.15.2.74.1.1.2.1.1.5,HPN-ICF-ACFP-MIB::hpnicfAcfpClientAppVersion,OCTET,read-create,,current,,The application version running on ACFP client
.1.3.6.1.4.1.11.2.14.11.15.2.74.1.1.2.1.1.6,HPN-ICF-ACFP-MIB::hpnicfAcfpClientIP,IpAddress,read-create,,current,,IP address of ACFP client.
.1.3.6.1.4.1.11.2.14.11.15.2.74.1.1.2.1.1.7,HPN-ICF-ACFP-MIB::hpnicfAcfpClientMode,BITS,read-create,,current,ipserver(0):redirect(1):mirror(2):passThrough(3),ACFP client informs Router or switch which mode it is operating. Router or switch checks hpnicfAcfpServerInfo to see whether it is capable of fulfilling this function. If not, router or switch generates a trap informing ACFP client such OAP mode is not supported.
.1.3.6.1.4.1.11.2.14.11.15.2.74.1.1.2.1.1.8,HPN-ICF-ACFP-MIB::hpnicfAcfpClientRowStatus,INTEGER,read-create,,current,active(1):notInService(2):notReady(3):createAndGo(4):createAndWait(5):destroy(6),RowStatus, supports three states: createAndGo, active, destroy. Creation Operation Restriction: Node hpnicfAcfpClientMode must be bound while creating a row. It is optional for other nodes. ACFP module must be enabled for the server while creating a row. The number of rows created must not exceed upper limit. Modification Operation Restriction: Nodes that do not support modification: hpnicfAcfpClientMode. Nodes that support modification: hpnicfAcfpClientDescription, hpnicfAcfpClientHwVersion, hpnicfAcfpClientOSVersion, hpnicfAcfpClientAppVersion and hpnicfAcfpClientIP. If the row to be modified does not exist, error returns directly. Deletion Operation Restriction: If the row to be deleted does not exist, success returns directly. 
.1.3.6.1.4.1.11.2.14.11.15.2.74.1.1.3,HPN-ICF-ACFP-MIB::hpnicfAcfpPolicy,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.2.74.1.1.3.1,HPN-ICF-ACFP-MIB::hpnicfAcfpPolicyTable,,not-accessible,,current,,This table lists all current policies for ACFP client(s). Entries in this table are created or removed implicitly when entries in the hpnicfAcfpRuleTable are created or removed, respectively. A policy entry in this table only exists as long as there is rule of this policy in the hpnicfAcfpRuleTable. The table serves for listing the existing policies and their remaining lifetimes and for changing lifetimes of policies and implicitly of all policy members and all their member policy rules can be deleted by setting hpnicfAcfpPolicyLifetime to 0.
.1.3.6.1.4.1.11.2.14.11.15.2.74.1.1.3.1.1,HPN-ICF-ACFP-MIB::hpnicfAcfpPolicyEntry,,not-accessible,hpnicfAcfpClientID:hpnicfAcfpPolicyIndex,current,,The list contains basic information of ACFP Policy.
.1.3.6.1.4.1.11.2.14.11.15.2.74.1.1.3.1.1.1,HPN-ICF-ACFP-MIB::hpnicfAcfpPolicyIndex,Integer32,accessible-for-notify,,current,,The identifier of the Policy of ACFP client
.1.3.6.1.4.1.11.2.14.11.15.2.74.1.1.3.1.1.2,HPN-ICF-ACFP-MIB::hpnicfAcfpPolicyInIfIndex,Integer32,read-create,,current,,Packet is received from this interface. The value of this object contains the same value of ifIndex of ifTable.
.1.3.6.1.4.1.11.2.14.11.15.2.74.1.1.3.1.1.3,HPN-ICF-ACFP-MIB::hpnicfAcfpPolicyOutIfIndex,Integer32,read-create,,current,,Packet is sent to this interface. The value of this object contains the same value of ifIndex of ifTable.
.1.3.6.1.4.1.11.2.14.11.15.2.74.1.1.3.1.1.4,HPN-ICF-ACFP-MIB::hpnicfAcfpPolicyDestIfIndex,Integer32,read-create,,current,,Through this interface, packet go to ACFP client from ACFP server. The value of this object contains the same value of ifIndex of ifTable.
.1.3.6.1.4.1.11.2.14.11.15.2.74.1.1.3.1.1.5,HPN-ICF-ACFP-MIB::hpnicfAcfpPolicyContextID,Integer32,read-only,,current,,Internal id ACFP server allocated used to map to the interface. ACFP server may send packet with this hpnicfAcfpPolicyContextID to ACFP client, ACFP client can make use of this hpnicfAcfpPolicyContextID and find the policy. 
.1.3.6.1.4.1.11.2.14.11.15.2.74.1.1.3.1.1.6,HPN-ICF-ACFP-MIB::hpnicfAcfpPolicyAdminStatus,INTEGER,read-create,,current,enable(1):disable(2),The value of this object indicates the desired status of the policy.
.1.3.6.1.4.1.11.2.14.11.15.2.74.1.1.3.1.1.7,HPN-ICF-ACFP-MIB::hpnicfAcfpPolicyLifetime,Integer32,read-create,,current,,When retrieved, this object delivers the maximum lifetime (seconds) of all the rules of this, i.e., of all the rows in hpnicfAcfpRuleTable that have the same values of hpnicfAcfpRulePolicyIndex and hpnicfAcfpClientID. Successfully writing to this object modifies the lifetime of all the rules of this. Successfully writing a value of 0 terminates all the rules and implicitly deletes this as soon as all member entries are removed from the hpnicfAcfpRuleTable. Note that after a lifetime expired, all the corresponding entry in the hpnicfAcfpRuleTable will be removed and this will be deleted implicitly. Writing to this object is processed by the ACFP MIB implementation by choosing a lifetime value that is greater than or equal to zero and less than or equal to the minimum of the requested value and the value specified by object hpnicfAcfpServerMaxLifetime: 0 <= lt_granted <= MINIMUM(lt_requested, lt_maximum) whereas: lt_granted is the actually granted lifetime by the ACFP MIB implementation. lt_requested is the requested lifetime of the ACFP client. lt_maximum is the value of object hpnicfAcfpServerMaxLifetime. SNMP set requests to this object may be rejected or the value of the object after an accepted set operation may be less than the value that was contained in the SNMP set request.
.1.3.6.1.4.1.11.2.14.11.15.2.74.1.1.3.1.1.8,HPN-ICF-ACFP-MIB::hpnicfAcfpPolicyTimeStart,OCTET,read-create,,current,,Beginning time of this policy every day. Eg. HH:MM:SS
.1.3.6.1.4.1.11.2.14.11.15.2.74.1.1.3.1.1.9,HPN-ICF-ACFP-MIB::hpnicfAcfpPolicyTimeEnd,OCTET,read-create,,current,,Ending time of this policy every day. Eg. HH:MM:SS
.1.3.6.1.4.1.11.2.14.11.15.2.74.1.1.3.1.1.10,HPN-ICF-ACFP-MIB::hpnicfAcfpPolicyRowStatus,INTEGER,read-create,,current,active(1):notInService(2):notReady(3):createAndGo(4):createAndWait(5):destroy(6),RowStatus, supports three states: createAndGo, active, destroy. Creation Operation Restriction: The client corresponding to the index hpnicfAcfpClientID must exist while creating a row. Nodes hpnicfAcfpPolicyTimeStart and hpnicfAcfpPolicyTimeEnd are bound together, and hpnicfAcfpPolicyTimeEnd must be greater than hpnicfAcfpPolicyTimeStart. The number of rows created on an incoming/outgoing interface cannot exceed the upper limit. The number of rows created cannot exceed the upper limit for each client. A packet matches a policy in the following order: - It first matches the policy with the highest priority. - For two policies with the same priority, it matches the one with the smallest client index. - For two policies with the same client index, it matches the one with the smallest policy index. Modification Operation Restriction: Nodes that do not support modification: hpnicfAcfpPolicyInIfIndex, hpnicfAcfpPolicyOutIfIndex, hpnicfAcfpPolicyDestIfIndex, hpnicfAcfpPolicyDestIfFailAction, hpnicfAcfpPolicyPriority. Nodes that support modification: hpnicfAcfpPolicyAdminStatus, hpnicfAcfpPolicyLifetime, hpnicfAcfpPolicyTimeStart and hpnicfAcfpPolicyTimeEnd. While modifying a row, if the row corresponding to the index configured does not exist, error returns directly. While modifying a node, the restriction over hpnicfAcfpPolicyTimeStart and hpnicfAcfpPolicyTimeEnd is the same as creating a node. Deletion Operation Restriction: If the row to be deleted does not exist, success returns directly. 
.1.3.6.1.4.1.11.2.14.11.15.2.74.1.1.3.1.1.11,HPN-ICF-ACFP-MIB::hpnicfAcfpPolicyDestIfFailAction,INTEGER,read-create,,current,delete(1):reserve(2),The value of this object indicates the action of the policy when the destination interface failed.
.1.3.6.1.4.1.11.2.14.11.15.2.74.1.1.3.1.1.12,HPN-ICF-ACFP-MIB::hpnicfAcfpPolicyPriority,INTEGER,read-create,,current,priority1(1):priority2(2):priority3(3):priority4(4):priority5(5):priority6(6):priority7(7):priority8(8),The value of this object indicates the priority of the policy. Priority8 is maximal priority. Priority1 is minimal priority.
.1.3.6.1.4.1.11.2.14.11.15.2.74.1.1.4,HPN-ICF-ACFP-MIB::hpnicfAcfpRule,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.2.74.1.1.4.1,HPN-ICF-ACFP-MIB::hpnicfAcfpRuleTable,,not-accessible,,current,,This table lists all the rules. It is indexed by hpnicfAcfpClientID, hpnicfAcfpRulePolicyIndex and hpnicfAcfpRuleIndex. Entries can be deleted by writing hpnicfAcfpPolicyLifetime to 0.
.1.3.6.1.4.1.11.2.14.11.15.2.74.1.1.4.1.1,HPN-ICF-ACFP-MIB::hpnicfAcfpRuleEntry,,not-accessible,hpnicfAcfpClientID:hpnicfAcfpPolicyIndex:hpnicfAcfpRuleIndex,current,,The list contains basic information of the rule.
.1.3.6.1.4.1.11.2.14.11.15.2.74.1.1.4.1.1.1,HPN-ICF-ACFP-MIB::hpnicfAcfpRuleIndex,Integer32,accessible-for-notify,,current,,The identifier of the rules which have the same hpnicfAcfpPolicyIndex and hpnicfAcfpClientID.hpnicfAcfpRuleIndex indicates rule sequence in the same policy.
.1.3.6.1.4.1.11.2.14.11.15.2.74.1.1.4.1.1.2,HPN-ICF-ACFP-MIB::hpnicfAcfpRuleOperStatus,INTEGER,read-only,,current,success(1):fail(2),The value of this object indicates the status of a rule. success : Applied rule to interface successfully. fail : Failed to apply rule to interface. 
.1.3.6.1.4.1.11.2.14.11.15.2.74.1.1.4.1.1.3,HPN-ICF-ACFP-MIB::hpnicfAcfpRuleAction,INTEGER,read-create,,current,permit(1):deny(2):redirect(3):mirror(4):rate(5),The action of this rule.
.1.3.6.1.4.1.11.2.14.11.15.2.74.1.1.4.1.1.4,HPN-ICF-ACFP-MIB::hpnicfAcfpRuleAll,INTEGER,read-create,,current,true(1):false(2),The rule match all packet or does not. true : all false : not all 
.1.3.6.1.4.1.11.2.14.11.15.2.74.1.1.4.1.1.5,HPN-ICF-ACFP-MIB::hpnicfAcfpRuleSrcMAC,OCTET,read-create,,current,,Source MAC of this rule.
.1.3.6.1.4.1.11.2.14.11.15.2.74.1.1.4.1.1.6,HPN-ICF-ACFP-MIB::hpnicfAcfpRuleDstMAC,OCTET,read-create,,current,,Destination MAC of this rule.
.1.3.6.1.4.1.11.2.14.11.15.2.74.1.1.4.1.1.7,HPN-ICF-ACFP-MIB::hpnicfAcfpRuleVlanStart,Integer32,read-create,,current,,Starting VLAN id of this rule. 0 : Invalid value
.1.3.6.1.4.1.11.2.14.11.15.2.74.1.1.4.1.1.8,HPN-ICF-ACFP-MIB::hpnicfAcfpRuleVlanEnd,Integer32,read-create,,current,,Ending VLAN id of this rule. 0 : Invalid value
.1.3.6.1.4.1.11.2.14.11.15.2.74.1.1.4.1.1.9,HPN-ICF-ACFP-MIB::hpnicfAcfpRuleProtocol,Integer32,read-create,,current,,The protocol-type of this rule. <0-255> Protocol number gre GRE tunneling(47) icmp Internet Control Message Protocol(1) igmp Internet Management Protocol(2) ip Any IP protocol(0) ipinip IP in IP tunneling(4) ospf OSPF routing protocol(89) tcp Transmission Control Protocol (6) udp User Datagram Protocol (17) 
.1.3.6.1.4.1.11.2.14.11.15.2.74.1.1.4.1.1.10,HPN-ICF-ACFP-MIB::hpnicfAcfpRuleSrcIP,IpAddress,read-create,,current,,Source IP address of this rule.
.1.3.6.1.4.1.11.2.14.11.15.2.74.1.1.4.1.1.11,HPN-ICF-ACFP-MIB::hpnicfAcfpRuleSrcIPMask,IpAddress,read-create,,current,,Source IP-address wild of this rule. Eg. 0.0.0.255.
.1.3.6.1.4.1.11.2.14.11.15.2.74.1.1.4.1.1.12,HPN-ICF-ACFP-MIB::hpnicfAcfpRuleSrcOp,INTEGER,read-create,,current,equal(1):notEqual(2):lessThan(3):greaterThan(4):range(5):invalid(6),Source Port operation for this rule
.1.3.6.1.4.1.11.2.14.11.15.2.74.1.1.4.1.1.13,HPN-ICF-ACFP-MIB::hpnicfAcfpRuleSrcStartPort,Integer32,read-create,,current,,Starting UDP/TCP Source Port number of this rule.
.1.3.6.1.4.1.11.2.14.11.15.2.74.1.1.4.1.1.14,HPN-ICF-ACFP-MIB::hpnicfAcfpRuleSrcEndPort,Integer32,read-create,,current,,Ending UDP/TCP Source Port of this rule.
.1.3.6.1.4.1.11.2.14.11.15.2.74.1.1.4.1.1.15,HPN-ICF-ACFP-MIB::hpnicfAcfpRuleDstIP,IpAddress,read-create,,current,,Destination IP address of this rule.
.1.3.6.1.4.1.11.2.14.11.15.2.74.1.1.4.1.1.16,HPN-ICF-ACFP-MIB::hpnicfAcfpRuleDstIPMask,IpAddress,read-create,,current,,Destination IP-address wild of this rule. Eg. 0.0.0.255
.1.3.6.1.4.1.11.2.14.11.15.2.74.1.1.4.1.1.17,HPN-ICF-ACFP-MIB::hpnicfAcfpRuleDstOp,INTEGER,read-create,,current,equal(1):nonEqual(2):lessThan(3):greaterThan(4):range(5):invalid(6),Destination Port operation for this rule
.1.3.6.1.4.1.11.2.14.11.15.2.74.1.1.4.1.1.18,HPN-ICF-ACFP-MIB::hpnicfAcfpRuleDstStartPort,Integer32,read-create,,current,,Starting UDP/TCP Destination Port number of this rule.
.1.3.6.1.4.1.11.2.14.11.15.2.74.1.1.4.1.1.19,HPN-ICF-ACFP-MIB::hpnicfAcfpRuleDstEndPort,Integer32,read-create,,current,,Ending UDP/TCP Destination Port of this rule.
.1.3.6.1.4.1.11.2.14.11.15.2.74.1.1.4.1.1.20,HPN-ICF-ACFP-MIB::hpnicfAcfpRulePrecedence,Integer32,read-create,,current,,The value of precedence field in IP header. <255> Invalid value <0-7> value of precedence routine(0) Routine precedence priority(1) Priority precedence immediate(2) Immediate precedence flash(3) Flash precedence flash-override(4) Flash Override precedence critical(5) Critical precedence internet(6) Network Control precedence network(7) Internetwork Control precedence 
.1.3.6.1.4.1.11.2.14.11.15.2.74.1.1.4.1.1.21,HPN-ICF-ACFP-MIB::hpnicfAcfpRuleTos,Integer32,read-create,,current,,The value of TOS field in IP header. <255> Invalid value <0-15> value of ToS (Type of Service) Normal(0) normal service min-monetary-cost(1) minimum monetary cost max-reliability(2) maximum reliability max-throughput(4) maximum throughput min-delay(8) minimum delay 
.1.3.6.1.4.1.11.2.14.11.15.2.74.1.1.4.1.1.22,HPN-ICF-ACFP-MIB::hpnicfAcfpRuleDscp,Integer32,read-create,,current,,The value of DSCP. <255> Invalid value <0-63> value of DSCP Be(0) best effort af11(10) assured forwarding 11 service af12(12) assured forwarding 12 service af13(14) assured forwarding 13 service af21(18) assured forwarding 18 service af22(20) assured forwarding 20 service af23(22) assured forwarding 22 service af31(26) assured forwarding 31 service af32(28) assured forwarding 32 service af33(30) assured forwarding 33 service af41(34) assured forwarding 41 service af42(36) assured forwarding 42 service af43(38) assured forwarding 43 service cs1(8) class selector 1 service cs2(16) class selector 2 service cs3(24) class selector 3 service cs4(32) class selector 4 service cs5(40) class selector 5 service cs6(48) class selector 6 service cs7(56) class selector 7 service ef(46) expedited forwarding service 
.1.3.6.1.4.1.11.2.14.11.15.2.74.1.1.4.1.1.23,HPN-ICF-ACFP-MIB::hpnicfAcfpRuleEstablish,INTEGER,read-create,,deprecated,true(1):false(2),Establish Flag. Matches the TCP packets with the ACK and/or RST flag, including the TCP packets of these types: SYN+ACK, ACK, FIN+ACK, RST, RST+ACK.
.1.3.6.1.4.1.11.2.14.11.15.2.74.1.1.4.1.1.24,HPN-ICF-ACFP-MIB::hpnicfAcfpRuleFragment,INTEGER,read-create,,current,true(1):false(2),The flag of matching fragmented packet.
.1.3.6.1.4.1.11.2.14.11.15.2.74.1.1.4.1.1.25,HPN-ICF-ACFP-MIB::hpnicfAcfpRulePacketRate,Integer32,read-create,,current,,Packet rate (Kbps) of this rule.
.1.3.6.1.4.1.11.2.14.11.15.2.74.1.1.4.1.1.26,HPN-ICF-ACFP-MIB::hpnicfAcfpRuleRowStatus,INTEGER,read-create,,current,active(1):notInService(2):notReady(3):createAndGo(4):createAndWait(5):destroy(6),RowStatus, supports three states: createAndGo, active, destroy. Creation Operation Restriction: Node hpnicfAcfpRuleAction must be bound while creating a line. Nodes hpnicfAcfpRuleAll and hpnicfAcfpRuleProtocol, hpnicfAcfpRuleSrcIP, hpnicfAcfpRuleSrcIPMask, hpnicfAcfpRuleDstIP, hpnicfAcfpRuleSrcOp, hpnicfAcfpRuleSrcStartPort, hpnicfAcfpRuleSrcEndPort, hpnicfAcfpRuleDstIP, hpnicfAcfpRuleDstIPMask, hpnicfAcfpRuleDstOp, hpnicfAcfpRuleDstStartPort, hpnicfAcfpRuleDstEndPort, hpnicfAcfpRulePrecedence, hpnicfAcfpRuleTos, hpnicfAcfpRuleDscp, hpnicfAcfpRuleTCPFlag, hpnicfAcfpRuleFragment are mutually exclusive. Nodes hpnicfAcfpRuleSrcIP and hpnicfAcfpRuleSrcIPMask are bound together, otherwise, the source IP address is neglected. The restriction over hpnicfAcfpRuleDstIP and hpnicfAcfpRuleDstIPMask is the same as hpnicfAcfpRuleSrcIP and hpnicfAcfpRuleSrcIPMask. Nodes hpnicfAcfpRuleDscp and hpnicfAcfpRulePrecedence, hpnicfAcfpRuleTos are mutually exclusive. If the node hpnicfAcfpRuleSrcOp is bound to range(5), hpnicfAcfpRuleSrcStartPort and hpnicfAcfpRuleSrcEndPort must be bound together, and hpnicfAcfpRuleSrcEndPort must be greater than hpnicfAcfpRuleSrcStartPort. If the node hpnicfAcfpRuleSrcOp is bound to equal(1), notEqual(2), lessThan(3) or greaterThan(4), hpnicfAcfpRuleSrcStartPort must be bound together, and hpnicfAcfpRuleSrcEndPort is neglected. The restriction over hpnicfAcfpRuleDstOp, hpnicfAcfpRuleDstStartPort and hpnicfAcfpRuleDstEndPort is the same as hpnicfAcfpRuleSrcOp, hpnicfAcfpRuleSrcStartPort and hpnicfAcfpRuleSrcEndPort. If the node hpnicfAcfpRuleAction is bound to redirect(3) or mirror(4), the destination interfaces of the policy the rule belonging to must exist; The number of rows created cannot exceed the upper limit for each policy, each inbound interface and each outbound interface. Modification Operation Restriction: The row does not support modification. Deletion Operation Restriction If the row to be deleted does not exist, success returns directly. 
.1.3.6.1.4.1.11.2.14.11.15.2.74.1.1.4.1.1.27,HPN-ICF-ACFP-MIB::hpnicfAcfpRuleTCPFlag,Integer32,read-create,,current,,TCP Flag. <0> don't care for TCP flag to match packets <1-65535> care for TCP flag to match packets, the value is combination of next list. URG_VALID (1 << 13) URG_SET (1 << 5) ACK_VALID (1 << 12) ACK_SET (1 << 4) PSH_VALID (1 << 11) PSH_SET (1 << 3) RST_VALID (1 << 10) RST_SET (1 << 2) SYN_VALID (1 << 9) SYN_SET (1 << 1) FIN_VALID (1 << 8) FIN_SET 1 Matches the TCP packets with the URG and/or ACK and/or PSH and/or RST and/or SYN and/or FIN flag, including the TCP packets of these types: SYN+ACK, ACK, FIN+ACK, RST, RST+ACK.
.1.3.6.1.4.1.11.2.14.11.15.2.74.1.1.4.1.1.28,HPN-ICF-ACFP-MIB::hpnicfAcfpRuleSrcIPV6Address,OCTET,read-create,,current,,Source IPv6 address of this rule.
.1.3.6.1.4.1.11.2.14.11.15.2.74.1.1.4.1.1.29,HPN-ICF-ACFP-MIB::hpnicfAcfpRuleSrcPrefixLen,Unsigned32,read-create,,current,,Source IPv6 address prefix length of this rule. Eg. 64.
.1.3.6.1.4.1.11.2.14.11.15.2.74.1.1.4.1.1.30,HPN-ICF-ACFP-MIB::hpnicfAcfpRuleDstIPV6Address,OCTET,read-create,,current,,Destination IPv6 address of this rule.
.1.3.6.1.4.1.11.2.14.11.15.2.74.1.1.4.1.1.31,HPN-ICF-ACFP-MIB::hpnicfAcfpRuleDstPrefixLen,Unsigned32,read-create,,current,,Destination IPv6 address prefix length of this rule. Eg. 64.
.1.3.6.1.4.1.11.2.14.11.15.2.74.1.1.4.1.1.32,HPN-ICF-ACFP-MIB::hpnicfAcfpRuleTrafficType,BITS,read-create,,current,unicast(0):multicast(1):broadcast(2),Traffic type of this rule. When retrieved, this object returns a set of bits indicating the traffic type.
.1.3.6.1.4.1.11.2.14.11.15.2.74.1.1.4.1.1.33,HPN-ICF-ACFP-MIB::hpnicfAcfpRuleTypeOrLen,Integer32,read-create,,current,,The type or length of ethernet packet. For Ethernet II encapsulation, it stands for packet type. For 802.3 encapsulation, it stands for packet length.
.1.3.6.1.4.1.11.2.14.11.15.2.74.1.1.5,HPN-ICF-ACFP-MIB::hpnicfAcfpNotifications,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.2.74.1.1.5.1,HPN-ICF-ACFP-MIB::hpnicfAcfpCurContextChanged,,,,,,This notification is sent when router or switch changed hpnicfAcfpServerCurContextType.
.1.3.6.1.4.1.11.2.14.11.15.2.74.1.1.5.2,HPN-ICF-ACFP-MIB::hpnicfAcfpClientRegister,,,,,,This notification is sent when the ACFP client is registered.
.1.3.6.1.4.1.11.2.14.11.15.2.74.1.1.5.3,HPN-ICF-ACFP-MIB::hpnicfAcfpClientUnRegister,,,,,,This notification is sent when the ACFP client is unregistered.
.1.3.6.1.4.1.11.2.14.11.15.2.74.1.1.5.4,HPN-ICF-ACFP-MIB::hpnicfAcfpClientDead,,,,,,This notification is sent when the ACFP client is not responding.
.1.3.6.1.4.1.11.2.14.11.15.2.74.1.1.5.5,HPN-ICF-ACFP-MIB::hpnicfAcfpNotSupportedOAPMode,,,,,,This notification is sent when router or switch cannot support OAP mode that ACFP client wants to operate on.
.1.3.6.1.4.1.11.2.14.11.15.2.74.1.1.5.6,HPN-ICF-ACFP-MIB::hpnicfAcfpLifetimeChangeEvent,,,,,,This notification can be generated for indicating that The lifetime of all member rules of the was changed by successfully writing to object hpnicfAcfpPolicyLifetime. Note that this notification is only sent if the lifetime of a policy was changed by successfully writing to object hpnicfAcfpPolicyLifetime.
.1.3.6.1.4.1.11.2.14.11.15.2.74.1.1.5.7,HPN-ICF-ACFP-MIB::hpnicfAcfpRuleCreatedEvent,,,,,,This notification is sent when a new rule is created.
.1.3.6.1.4.1.11.2.14.11.15.2.74.1.1.5.8,HPN-ICF-ACFP-MIB::hpnicfAcfpRuleDeletedEvent,,,,,,This notification is sent when a rule is deleted.
.1.3.6.1.4.1.11.2.14.11.15.2.74.1.1.5.9,HPN-ICF-ACFP-MIB::hpnicfAcfpRuleErrorEvent,,,,,,This notification is sent when rule cannot be applied.
.1.3.6.1.4.1.11.2.14.11.15.2.74.1.1.5.10,HPN-ICF-ACFP-MIB::hpnicfAcfpLifetimeExpireEvent,,,,,,This notification is sent when the time of the policy existed exceeds its lifetime.
.1.3.6.1.4.1.11.2.14.11.15.2.75,HPN-ICF-OID-MIB::hpnicfDot11,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.2.75.1,HPN-ICF-DOT11-ACMT-MIB::hpnicfDot11ACMT,,,,,,This MIB defines information as per wireless AC and tunnel between AP and AC. If NMS intends to get more detailed information for the AP and AC, it could refer entPhysicalIndex in the Entity MIB to get entity information. GLOSSARY IEEE 802.11 Standard to encourage interoperability among wireless networking equipment. Access point (AP) Transmitter/receiver (transceiver) device that commonly connects and transports data between a wireless network and a wired network. Access control (AC) To control and manage multi-APs, it will bridge wireless and wired network. Radio The chip set to receive and send wireless signal. Fat AP Applied in the home, SOHO and so on, and it could independently work without help from AC. Fit AP Applied in the enterprise environment, it will work under the control and management from AC. Control And Provisioning of Wireless Access Points Protocol The short name of protocol is CAPWAP. AC will control and manage AP by CAPWAP tunnel protocol defined by IETF. Also, a data tunnel will be set up between AC and AP. Basic Service Set The IEEE 802.11 BSS of an AP comprises of the stations directly associating with the AP. It will be identified by BSSID.
.1.3.6.1.4.1.11.2.14.11.15.2.75.1.1,HPN-ICF-DOT11-ACMT-MIB::hpnicfDot11ACObjectGroup,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.2.75.1.1.1,HPN-ICF-DOT11-ACMT-MIB::hpnicfDot11ACObject,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.2.75.1.1.1.1,HPN-ICF-DOT11-ACMT-MIB::hpnicfDot11CurrentACMACMode,INTEGER,read-only,,current,split(1):localtunnel(2):localbridge(3):fatAP(4),Represents which MAC mode defined in the CAPWAP draft is in use for the AC.
.1.3.6.1.4.1.11.2.14.11.15.2.75.1.1.1.2,HPN-ICF-DOT11-ACMT-MIB::hpnicfDot11MaxAPNumPermitted,Integer32,read-only,,current,,Represents the maximum number of AP connection permitted for one AC.
.1.3.6.1.4.1.11.2.14.11.15.2.75.1.1.1.3,HPN-ICF-DOT11-ACMT-MIB::hpnicfDot11MaxStationNumPermitted,Integer32,read-only,,current,,Represents the maximum number of station connection permitted for one AC.
.1.3.6.1.4.1.11.2.14.11.15.2.75.1.1.1.4,HPN-ICF-DOT11-ACMT-MIB::hpnicfDot11RunAPNumThreshold,Integer32,read-write,,current,,When the percentage of run AP number is larger than this threshold, a notification will be sent.
.1.3.6.1.4.1.11.2.14.11.15.2.75.1.1.2,HPN-ICF-DOT11-ACMT-MIB::hpnicfDot11ACLoadInfo,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.2.75.1.1.2.1,HPN-ICF-DOT11-ACMT-MIB::hpnicfDot11APConnectCount,Integer32,read-only,,current,,Represents the total number of APs which are connecting to AC.
.1.3.6.1.4.1.11.2.14.11.15.2.75.1.1.2.2,HPN-ICF-DOT11-ACMT-MIB::hpnicfDot11StationConnectCount,Integer32,read-only,,current,,Represents the total number of stations which are accessing the WLAN service through AC.
.1.3.6.1.4.1.11.2.14.11.15.2.75.1.1.2.3,HPN-ICF-DOT11-ACMT-MIB::hpnicfDot11ACIFLoadInfoTable,,not-accessible,,current,,Represents AP number information of interface.
.1.3.6.1.4.1.11.2.14.11.15.2.75.1.1.2.3.1,HPN-ICF-DOT11-ACMT-MIB::hpnicfDot11ACIFLoadInfoEntry,,not-accessible,hpnicfDot11ACIfIndex,current,,Each entry represents AP number information of an interface
.1.3.6.1.4.1.11.2.14.11.15.2.75.1.1.2.3.1.1,HPN-ICF-DOT11-ACMT-MIB::hpnicfDot11ACIfIndex,Integer32,accessible-for-notify,,current,,Represents index of AC interface.
.1.3.6.1.4.1.11.2.14.11.15.2.75.1.1.2.3.1.2,HPN-ICF-DOT11-ACMT-MIB::hpnicfDot11ACIfApNum,Integer32,read-only,,current,,Represents AP number connected to the AC interface.
.1.3.6.1.4.1.11.2.14.11.15.2.75.1.1.2.3.1.3,HPN-ICF-DOT11-ACMT-MIB::hpnicfDot11ACIfStaNum,Integer32,read-only,,current,,Represents Station number connected to the AC interface.
.1.3.6.1.4.1.11.2.14.11.15.2.75.1.1.2.3.1.4,HPN-ICF-DOT11-ACMT-MIB::hpnicfDot11ACIfName,OCTET,read-only,,current,,Represents InterfaceName AP number connected to AC interface.
.1.3.6.1.4.1.11.2.14.11.15.2.75.1.1.2.4,HPN-ICF-DOT11-ACMT-MIB::hpnicfDot11MasterAPCount,Integer32,read-only,,current,,Represents the total number of AP which have established the master tunnel with AC.
.1.3.6.1.4.1.11.2.14.11.15.2.75.1.1.2.5,HPN-ICF-DOT11-ACMT-MIB::hpnicfDot11SlaveAPCount,Integer32,read-only,,current,,Represents the total number of AP which have established the slave tunnel with AC.
.1.3.6.1.4.1.11.2.14.11.15.2.75.1.1.2.6,HPN-ICF-DOT11-ACMT-MIB::hpnicfDot11ConnectAutoAPCount,Integer32,read-only,,current,,Represents the total number of auto APs that are connecting to AC.
.1.3.6.1.4.1.11.2.14.11.15.2.75.1.1.2.7,HPN-ICF-DOT11-ACMT-MIB::hpnicfDot11PersistentAPCount,Integer32,read-only,,current,,Represents the total number of persistent AP.
.1.3.6.1.4.1.11.2.14.11.15.2.75.1.1.2.8,HPN-ICF-DOT11-ACMT-MIB::hpnicfDot11AcUploadFrameCnt,Counter64,read-only,,current,,Represents the number of frames that AP sends to AC through LWAPP tunnel.
.1.3.6.1.4.1.11.2.14.11.15.2.75.1.1.2.9,HPN-ICF-DOT11-ACMT-MIB::hpnicfDot11AcDownloadFrameCnt,Counter64,read-only,,current,,Represents the number of frames that AC sends to AP through LWAPP tunnel.
.1.3.6.1.4.1.11.2.14.11.15.2.75.1.1.2.10,HPN-ICF-DOT11-ACMT-MIB::hpnicfDot11AcUploadFrameBytes,Counter64,read-only,,current,,Represents the bytes of frames that AP sends to AC through LWAPP tunnel.
.1.3.6.1.4.1.11.2.14.11.15.2.75.1.1.2.11,HPN-ICF-DOT11-ACMT-MIB::hpnicfDot11AcDownloadFrameBytes,Counter64,read-only,,current,,Represents the bytes of frames that AC sends to AP through LWAPP tunnel.
.1.3.6.1.4.1.11.2.14.11.15.2.75.1.1.2.12,HPN-ICF-DOT11-ACMT-MIB::hpnicfDot11BackupACRole,INTEGER,read-only,,current,null(1):master(2):slave(3),This object represents the Identity of the AC null: Not configured master: Master AC slave: Slave AC.
.1.3.6.1.4.1.11.2.14.11.15.2.75.1.1.2.13,HPN-ICF-DOT11-ACMT-MIB::hpnicfDot11BackupACNMSIP,IpAddress,read-only,,current,,This object represents the manger IP address of the slave ac.
.1.3.6.1.4.1.11.2.14.11.15.2.75.1.1.2.14,HPN-ICF-DOT11-ACMT-MIB::hpnicfDot11ACBackupMode,INTEGER,read-only,,current,null(1):hotBackup(2):coldBackup(3),This object represents the ac backup mode.
.1.3.6.1.4.1.11.2.14.11.15.2.75.1.1.2.15,HPN-ICF-DOT11-ACMT-MIB::hpnicfDot11ACBackupStatus,INTEGER,read-only,,current,active(1):standby(2),This object represents the ac backup status.
.1.3.6.1.4.1.11.2.14.11.15.2.75.1.1.2.16,HPN-ICF-DOT11-ACMT-MIB::hpnicfDot11ACSwitchCnt,Integer32,read-only,,current,,This object represents the ac switch times.
.1.3.6.1.4.1.11.2.14.11.15.2.75.1.1.2.17,HPN-ICF-DOT11-ACMT-MIB::hpnicfDot11ACSouthifPacketOutputCount,Counter64,read-only,,current,,Represents the count of output packets with the down-link interface.
.1.3.6.1.4.1.11.2.14.11.15.2.75.1.1.2.18,HPN-ICF-DOT11-ACMT-MIB::hpnicfDot11ACSouthifPacketOutputBytes,Counter64,read-only,,current,,Represents the bytes of output packets with the down-link interface.
.1.3.6.1.4.1.11.2.14.11.15.2.75.1.1.2.19,HPN-ICF-DOT11-ACMT-MIB::hpnicfDot11ACSouthifPacketInputCount,Counter64,read-only,,current,,Represents the count of input packets with the down-link interface.
.1.3.6.1.4.1.11.2.14.11.15.2.75.1.1.2.20,HPN-ICF-DOT11-ACMT-MIB::hpnicfDot11ACSouthifPacketInputBytes,Counter64,read-only,,current,,Represents the bytes of input packets with the down-link interface.
.1.3.6.1.4.1.11.2.14.11.15.2.75.1.1.2.21,HPN-ICF-DOT11-ACMT-MIB::hpnicfDot11TotalAPconnected,Integer32,read-only,,current,,Represents the total number of AP which are connected to AC.
.1.3.6.1.4.1.11.2.14.11.15.2.75.1.1.2.22,HPN-ICF-DOT11-ACMT-MIB::hpnicfDot11RemainingAPcapacity,Integer32,read-only,,current,,Represents the remaining AP capacity of the AC.
.1.3.6.1.4.1.11.2.14.11.15.2.75.1.1.3,HPN-ICF-DOT11-ACMT-MIB::hpnicfDot11WLANAssocStatisInfo,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.2.75.1.1.3.1,HPN-ICF-DOT11-ACMT-MIB::hpnicfDot11StationAssocSum,Counter32,read-only,,current,,Represents the total number of station association.
.1.3.6.1.4.1.11.2.14.11.15.2.75.1.1.3.2,HPN-ICF-DOT11-ACMT-MIB::hpnicfDot11StationAssocFailSum,Counter32,read-only,,current,,Represents the total number of station association failure.
.1.3.6.1.4.1.11.2.14.11.15.2.75.1.1.3.3,HPN-ICF-DOT11-ACMT-MIB::hpnicfDot11StationReassocSum,Counter32,read-only,,current,,Represents the total number of station reassociation.
.1.3.6.1.4.1.11.2.14.11.15.2.75.1.1.3.4,HPN-ICF-DOT11-ACMT-MIB::hpnicfDot11StationAssocRejectedSum,Counter32,read-only,,current,,Represents the total number of station association rejected on account of resource limit.
.1.3.6.1.4.1.11.2.14.11.15.2.75.1.1.3.5,HPN-ICF-DOT11-ACMT-MIB::hpnicfDot11StationExDeAuthenSum,Counter32,read-only,,current,,Represents the total number of exceptional station deauthentication (Without sending a deauthentication to AP).
.1.3.6.1.4.1.11.2.14.11.15.2.75.1.1.3.6,HPN-ICF-DOT11-ACMT-MIB::hpnicfDot11StationCurAssocSum,Integer32,read-only,,current,,Represents the total number of current associated stations.
.1.3.6.1.4.1.11.2.14.11.15.2.75.1.1.3.7,HPN-ICF-DOT11-ACMT-MIB::hpnicfDot11StationAssocReqSum,Counter32,read-only,,current,,Represents the total number of station association request.
.1.3.6.1.4.1.11.2.14.11.15.2.75.1.1.3.8,HPN-ICF-DOT11-ACMT-MIB::hpnicfDot11StationReassocReqSum,Counter32,read-only,,current,,Represents the total number of station reassociation request.
.1.3.6.1.4.1.11.2.14.11.15.2.75.1.1.3.9,HPN-ICF-DOT11-ACMT-MIB::hpnicfDot11StationReassocFailSum,Counter32,read-only,,current,,Represents the total number of station reassociation failure.
.1.3.6.1.4.1.11.2.14.11.15.2.75.1.1.4,HPN-ICF-DOT11-ACMT-MIB::hpnicfDot11ACBASInfo,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.2.75.1.1.4.1,HPN-ICF-DOT11-ACMT-MIB::hpnicfDot11ACBASSysObjects,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.2.75.1.1.4.2,HPN-ICF-DOT11-ACMT-MIB::hpnicfDot11ACBASTableObjects,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.2.75.1.1.4.2.3,HPN-ICF-DOT11-ACMT-MIB::hpnicfDot11ACBASIfTable,,not-accessible,,current,,Represents the BAS information of interfaces.
.1.3.6.1.4.1.11.2.14.11.15.2.75.1.1.4.2.3.1,HPN-ICF-DOT11-ACMT-MIB::hpnicfDot11ACBASIfEntry,,not-accessible,hpnicfDot11ACBASIfIndex,current,,Each entry represents the BAS information of an interface
.1.3.6.1.4.1.11.2.14.11.15.2.75.1.1.4.2.3.1.1,HPN-ICF-DOT11-ACMT-MIB::hpnicfDot11ACBASIfIndex,Integer32,not-accessible,,current,,The ifIndex of the BAS interface. 
.1.3.6.1.4.1.11.2.14.11.15.2.75.1.1.4.2.3.1.2,HPN-ICF-DOT11-ACMT-MIB::hpnicfDot11ACBASIfDescr,OCTET,read-only,,current,,A textual string containing information about the BAS interface. 
.1.3.6.1.4.1.11.2.14.11.15.2.75.1.1.4.2.3.1.3,HPN-ICF-DOT11-ACMT-MIB::hpnicfDot11ACBASIfType,INTEGER,read-only,,current,other(1):regular1822(2):hdh1822(3):ddnX25(4):rfc877x25(5):ethernetCsmacd(6):iso88023Csmacd(7):iso88024TokenBus(8):iso88025TokenRing(9):iso88026Man(10):starLan(11):proteon10Mbit(12):proteon80Mbit(13):hyperchannel(14):fddi(15):lapb(16):sdlc(17):ds1(18):e1(19):basicISDN(20):primaryISDN(21):propPointToPointSerial(22):ppp(23):softwareLoopback(24):eon(25):ethernet3Mbit(26):nsip(27):slip(28):ultra(29):ds3(30):sip(31):frameRelay(32):rs232(33):para(34):arcnet(35):arcnetPlus(36):atm(37):miox25(38):sonet(39):x25ple(40):iso88022llc(41):localTalk(42):smdsDxi(43):frameRelayService(44):v35(45):hssi(46):hippi(47):modem(48):aal5(49):sonetPath(50):sonetVT(51):smdsIcip(52):propVirtual(53):propMultiplexor(54):ieee80212(55):fibreChannel(56):hippiInterface(57):frameRelayInterconnect(58):aflane8023(59):aflane8025(60):cctEmul(61):fastEther(62):isdn(63):v11(64):v36(65):g703at64k(66):g703at2mb(67):qllc(68):fastEtherFX(69):channel(70):ieee80211(71):ibm370parChan(72):escon(73):dlsw(74):isdns(75):isdnu(76):lapd(77):ipSwitch(78):rsrb(79):atmLogical(80):ds0(81):ds0Bundle(82):bsc(83):async(84):cnr(85):iso88025Dtr(86):eplrs(87):arap(88):propCnls(89):hostPad(90):termPad(91):frameRelayMPI(92):x213(93):adsl(94):radsl(95):sdsl(96):vdsl(97):iso88025CRFPInt(98):myrinet(99):voiceEM(100):voiceFXO(101):voiceFXS(102):voiceEncap(103):voiceOverIp(104):atmDxi(105):atmFuni(106):atmIma(107):pppMultilinkBundle(108):ipOverCdlc(109):ipOverClaw(110):stackToStack(111):virtualIpAddress(112):mpc(113):ipOverAtm(114):iso88025Fiber(115):tdlc(116):gigabitEthernet(117):hdlc(118):lapf(119):v37(120):x25mlp(121):x25huntGroup(122):transpHdlc(123):interleave(124):fast(125):ip(126):docsCableMaclayer(127):docsCableDownstream(128):docsCableUpstream(129):a12MppSwitch(130):tunnel(131):coffee(132):ces(133):atmSubInterface(134):l2vlan(135):l3ipvlan(136):l3ipxvlan(137):digitalPowerline(138):mediaMailOverIp(139):dtm(140):dcn(141):ipForward(142):msdsl(143):ieee1394(144):if-gsn(145):dvbRccMacLayer(146):dvbRccDownstream(147):dvbRccUpstream(148):atmVirtual(149):mplsTunnel(150):srp(151):voiceOverAtm(152):voiceOverFrameRelay(153):idsl(154):compositeLink(155):ss7SigLink(156):propWirelessP2P(157):frForward(158):rfc1483(159):usb(160):ieee8023adLag(161):bgppolicyaccounting(162):frf16MfrBundle(163):h323Gatekeeper(164):h323Proxy(165):mpls(166):mfSigLink(167):hdsl2(168):shdsl(169):ds1FDL(170):pos(171):dvbAsiIn(172):dvbAsiOut(173):plc(174):nfas(175):tr008(176):gr303RDT(177):gr303IDT(178):isup(179):propDocsWirelessMaclayer(180):propDocsWirelessDownstream(181):propDocsWirelessUpstream(182):hiperlan2(183):propBWAp2Mp(184):sonetOverheadChannel(185):digitalWrapperOverheadChannel(186):aal2(187):radioMAC(188):atmRadio(189):imt(190):mvl(191):reachDSL(192):frDlciEndPt(193):atmVciEndPt(194):opticalChannel(195):opticalTransport(196):propAtm(197):voiceOverCable(198):infiniband(199):teLink(200):q2931(201):virtualTg(202):sipTg(203):sipSig(204):docsCableUpstreamChannel(205):econet(206):pon155(207):pon622(208):bridge(209):linegroup(210):voiceEMFGD(211):voiceFGDEANA(212):voiceDID(213):mpegTransport(214):sixToFour(215):gtp(216):pdnEtherLoop1(217):pdnEtherLoop2(218):opticalChannelGroup(219):homepna(220):gfp(221):ciscoISLvlan(222):actelisMetaLOOP(223):fcipLink(224):rpr(225):qam(226):lmp(227):cblVectaStar(228):docsCableMCmtsDownstream(229):adsl2(230):macSecControlledIF(231):macSecUncontrolledIF(232):aviciOpticalEther(233):atmbond(234):voiceFGDOS(235):mocaVersion1(236):ieee80216WMAN(237):adsl2plus(238):dvbRcsMacLayer(239):dvbTdm(240):dvbRcsTdma(241):x86Laps(242):wwanPP(243):wwanPP2(244):voiceEBS(245):ifPwType(246):ilan(247):pip(248):aluELP(249):gpon(250):vdsl2(251):capwapDot11Profile(252):capwapDot11Bss(253):capwapWtpVirtualRadio(254):bits(255):docsCableUpstreamRfPort(256):cableDownstreamRfPort(257):vmwareVirtualNic(258):ieee802154(259):otnOdu(260):otnOtu(261):ifVfiType(262):g9981(263):g9982(264):g9983(265):aluEpon(266):aluEponOnu(267):aluEponPhysicalUni(268):aluEponLogicalLink(269):aluGponOnu(270):aluGponPhysicalUni(271):vmwareNicTeam(272):docsOfdmDownstream(277):docsOfdmaUpstream(278):gfast(279):sdci(280):xboxWireless(281):fastdsl(282):docsCableScte55d1FwdOob(283):docsCableScte55d1RetOob(284):docsCableScte55d2DsOob(285):docsCableScte55d2UsOob(286):docsCableNdf(287):docsCableNdr(288):ptm(289):ghn(290):otnOtsi(291):otnOtuc(292):otnOduc(293):otnOtsig(294):microwaveCarrierTermination(295):microwaveRadioLinkTerminal(296),The type of the BAS interface. 
.1.3.6.1.4.1.11.2.14.11.15.2.75.1.1.5,HPN-ICF-DOT11-ACMT-MIB::hpnicfDot11ACStaUserSecAuthStatis,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.2.75.1.1.5.1,HPN-ICF-DOT11-ACMT-MIB::hpnicfDot11ACStaUserAuthCurNumber,Integer32,read-only,,current,,Represents the current number of user authenticated with this AC.
.1.3.6.1.4.1.11.2.14.11.15.2.75.1.1.5.2,HPN-ICF-DOT11-ACMT-MIB::hpnicfDot11ACStaUserConnFailCnt,Counter32,read-only,,current,,Represents the total number of user disconnected with this AC.
.1.3.6.1.4.1.11.2.14.11.15.2.75.1.1.5.3,HPN-ICF-DOT11-ACMT-MIB::hpnicfDot11ACStaUserAuthReqCnt,Counter32,read-only,,current,,Represents the total number of user authenticate request with this AC.
.1.3.6.1.4.1.11.2.14.11.15.2.75.1.1.5.4,HPN-ICF-DOT11-ACMT-MIB::hpnicfDot11ACStaUserAuthSuccCnt,Counter32,read-only,,current,,Represents the total number of users authenticated successful with this AC.
.1.3.6.1.4.1.11.2.14.11.15.2.75.1.1.5.5,HPN-ICF-DOT11-ACMT-MIB::hpnicfDot11ACStaUserAuthFailCnt,Counter32,read-only,,current,,Represents the total number of user authenticated failed with this AC.
.1.3.6.1.4.1.11.2.14.11.15.2.75.1.1.5.6,HPN-ICF-DOT11-ACMT-MIB::hpnicfDot11ACStaUserAllAuthCntCM,Counter32,read-only,,current,,Represents the total number of users authenticated with this AC.
.1.3.6.1.4.1.11.2.14.11.15.2.75.1.1.6,HPN-ICF-DOT11-ACMT-MIB::hpnicfDot11ACStaSecAuthTypeStatis,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.2.75.1.1.6.1,HPN-ICF-DOT11-ACMT-MIB::hpnicfDot11ACStaUserPortalOnlineNum,Integer32,read-only,,current,,Represents the number of online portal users authenticated by RADIUS, including MAC-trigger and IMSIAuth users.
.1.3.6.1.4.1.11.2.14.11.15.2.75.1.1.6.2,HPN-ICF-DOT11-ACMT-MIB::hpnicfDot11ACStaUserFreeAuthOnlineNum,Integer32,read-only,,current,,Numbers of online user is no need authenticated.
.1.3.6.1.4.1.11.2.14.11.15.2.75.1.1.6.3,HPN-ICF-DOT11-ACMT-MIB::hpnicfDot11ACStaUserAssociateAuthOnlineNum,Integer32,read-only,,current,,Represents the number of online users authenticated by associated authentication, excluding AutoAuth users.
.1.3.6.1.4.1.11.2.14.11.15.2.75.1.1.6.4,HPN-ICF-DOT11-ACMT-MIB::hpnicfDot11ACStaUserMacAuthOnlineNum,Integer32,read-only,,current,,The numbers of online user which is launched authentication by MAC address and authenticated by Radius.
.1.3.6.1.4.1.11.2.14.11.15.2.75.1.1.6.5,HPN-ICF-DOT11-ACMT-MIB::hpnicfDot11ACStaUserPortalLostConnectionCnt,Counter32,read-only,,current,,For PortalAuth user, represents disconnection count but voluntarily disconnect, it should not delete authenticated user when client roamed.
.1.3.6.1.4.1.11.2.14.11.15.2.75.1.1.6.6,HPN-ICF-DOT11-ACMT-MIB::hpnicfDot11ACStaUserFreeAuthLostConnectionCnt,Counter32,read-only,,current,,For FreeAuth user, represents disconnection count but voluntarily disconnect, it should not delete authenticated user when client roamed.
.1.3.6.1.4.1.11.2.14.11.15.2.75.1.1.6.7,HPN-ICF-DOT11-ACMT-MIB::hpnicfDot11ACStaUserAssociateAuthLostConnectionCnt,Counter32,read-only,,current,,For AssociateAuth user, represents disconnection count but voluntarily disconnect, it should not delete authenticated user when client roamed.
.1.3.6.1.4.1.11.2.14.11.15.2.75.1.1.6.8,HPN-ICF-DOT11-ACMT-MIB::hpnicfDot11ACStaUserMacAuthLostConnectionCnt,Counter32,read-only,,current,,For MacAuth user, represents disconnection count but voluntarily disconnect, it should not delete authenticated user when client roamed.
.1.3.6.1.4.1.11.2.14.11.15.2.75.1.1.6.9,HPN-ICF-DOT11-ACMT-MIB::hpnicfDot11ACStaPortalAuthReqCnt,Counter32,read-only,,current,,Represents PortalAuth request count after AP up.
.1.3.6.1.4.1.11.2.14.11.15.2.75.1.1.6.10,HPN-ICF-DOT11-ACMT-MIB::hpnicfDot11ACStaAssociateAuthReqCnt,Counter32,read-only,,current,,Represents AssociateAuth request count after AP up.
.1.3.6.1.4.1.11.2.14.11.15.2.75.1.1.6.11,HPN-ICF-DOT11-ACMT-MIB::hpnicfDot11ACStaMacAuthReqCnt,Counter32,read-only,,current,,Represents MacAuth request count after AP up.
.1.3.6.1.4.1.11.2.14.11.15.2.75.1.1.6.12,HPN-ICF-DOT11-ACMT-MIB::hpnicfDot11ACStaPortalAuthSuccCnt,Counter32,read-only,,current,,Represents count of PortalAuth authenticated successfully after AP up.
.1.3.6.1.4.1.11.2.14.11.15.2.75.1.1.6.13,HPN-ICF-DOT11-ACMT-MIB::hpnicfDot11ACStaAssociateAuthSuccCnt,Counter32,read-only,,current,,Represents count of AssociateAuth authenticated successfully after AP up.
.1.3.6.1.4.1.11.2.14.11.15.2.75.1.1.6.14,HPN-ICF-DOT11-ACMT-MIB::hpnicfDot11ACStaMacAuthSuccCnt,Counter32,read-only,,current,,Represents count of MacAuth authenticated successfully after AP up.
.1.3.6.1.4.1.11.2.14.11.15.2.75.1.1.6.15,HPN-ICF-DOT11-ACMT-MIB::hpnicfDot11ACStaPortalAuthReqFailCnt,Counter32,read-only,,current,,Represents count of PortalAuth failure in request after AP up.
.1.3.6.1.4.1.11.2.14.11.15.2.75.1.1.6.16,HPN-ICF-DOT11-ACMT-MIB::hpnicfDot11ACStaAssociateAuthReqFailCnt,Counter32,read-only,,current,,Represents count of AssociateAuth failure in request after AP up.
.1.3.6.1.4.1.11.2.14.11.15.2.75.1.1.6.17,HPN-ICF-DOT11-ACMT-MIB::hpnicfDot11ACStaMacAuthReqFailCnt,Counter32,read-only,,current,,Represents count of MacAuth failure in request after AP up.
.1.3.6.1.4.1.11.2.14.11.15.2.75.1.1.6.18,HPN-ICF-DOT11-ACMT-MIB::hpnicfDot11ACStaUserAutoAuthOnlineNumCM,Integer32,read-only,,current,,Represents the number of online users authenticated by auto authentication.
.1.3.6.1.4.1.11.2.14.11.15.2.75.1.1.6.19,HPN-ICF-DOT11-ACMT-MIB::hpnicfDot11ACStaUserAutoAuthLostConnectionCntCM,Counter32,read-only,,current,,Represents the disconnection count of AutoAuth users, excluding the ones who disconnect AP by themselves.
.1.3.6.1.4.1.11.2.14.11.15.2.75.1.1.6.20,HPN-ICF-DOT11-ACMT-MIB::hpnicfDot11ACStaAutoAuthReqCntCM,Counter32,read-only,,current,,Represents the count of AutoAuth requests after AP up.
.1.3.6.1.4.1.11.2.14.11.15.2.75.1.1.6.21,HPN-ICF-DOT11-ACMT-MIB::hpnicfDot11ACStaAutoAuthSuccCntCM,Counter32,read-only,,current,,Represents the count of successful AutoAuth authentications after AP up.
.1.3.6.1.4.1.11.2.14.11.15.2.75.1.1.6.22,HPN-ICF-DOT11-ACMT-MIB::hpnicfDot11ACStaAutoAuthReqFailCntCM,Counter32,read-only,,current,,Represents the count of failed AutoAuth requests after AP is up.
.1.3.6.1.4.1.11.2.14.11.15.2.75.1.1.7,HPN-ICF-DOT11-ACMT-MIB::hpnicfDot11ACPortalStatisticCMTable,,not-accessible,,current,,The table describes portal statistics information.
.1.3.6.1.4.1.11.2.14.11.15.2.75.1.1.7.1,HPN-ICF-DOT11-ACMT-MIB::hpnicfDot11ACPortalStatisticCMEntry,,not-accessible,hpnicfDot11ACPortalStatisticSSIDCM,current,,Each entry contains the portal statistics information of an SSID.
.1.3.6.1.4.1.11.2.14.11.15.2.75.1.1.7.1.1,HPN-ICF-DOT11-ACMT-MIB::hpnicfDot11ACPortalStatisticSSIDCM,OCTET,not-accessible,,current,,Represents the service policy name.
.1.3.6.1.4.1.11.2.14.11.15.2.75.1.1.7.1.2,HPN-ICF-DOT11-ACMT-MIB::hpnicfDot11ACPortalStatAuthReqCM,Counter32,read-only,,current,,Represents the total number of portal authentication requests from portal server to AC.
.1.3.6.1.4.1.11.2.14.11.15.2.75.1.1.7.1.3,HPN-ICF-DOT11-ACMT-MIB::hpnicfDot11ACPortalStatAuthRespCM,Counter32,read-only,,current,,Represents the total number of portal authentication responses from AC to portal server.
.1.3.6.1.4.1.11.2.14.11.15.2.75.1.2,HPN-ICF-DOT11-ACMT-MIB::hpnicfDot11CAPWAPTunnelGroup,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.2.75.1.2.1,HPN-ICF-DOT11-ACMT-MIB::hpnicfDot11CAPWAPTunnelTable,,not-accessible,,current,,The table will list all the APs which are connecting to the AC by the CAPWAP tunnel protocol.
.1.3.6.1.4.1.11.2.14.11.15.2.75.1.2.1.1,HPN-ICF-DOT11-ACMT-MIB::hpnicfDot11CAPWAPTunnelEntry,,not-accessible,hpnicfDot11CurrTunnelAPID,current,,Each entry contains information of data tunnel and control tunnel of AP which is connecting to AC.
.1.3.6.1.4.1.11.2.14.11.15.2.75.1.2.1.1.1,HPN-ICF-DOT11-ACMT-MIB::hpnicfDot11CurrTunnelAPID,OCTET,accessible-for-notify,,current,,To uniquely identify the CAPWAP tunnel set up between the AP identified by APID and a specific AC.
.1.3.6.1.4.1.11.2.14.11.15.2.75.1.2.1.1.2,HPN-ICF-DOT11-ACMT-MIB::hpnicfDot11CtrlTunnelCurrSec,INTEGER,read-only,,current,cleartxt(1):dtls(2):ipsec(3),Represents what security scheme is in use for control tunnel.
.1.3.6.1.4.1.11.2.14.11.15.2.75.1.2.1.1.3,HPN-ICF-DOT11-ACMT-MIB::hpnicfDot11CtrlTunnelUpTime,Integer32,read-only,,current,,Represents how long for control tunnel up. If the value is zero, then tunnel is not set up.
.1.3.6.1.4.1.11.2.14.11.15.2.75.1.2.1.1.4,HPN-ICF-DOT11-ACMT-MIB::hpnicfDot11DataTunnelCurrSec,INTEGER,read-only,,current,cleartxt(1):dtls(2):ipsec(3),Represents what security scheme is in use for data tunnel.
.1.3.6.1.4.1.11.2.14.11.15.2.75.1.2.1.1.5,HPN-ICF-DOT11-ACMT-MIB::hpnicfDot11DataTunnelUpTime,Integer32,read-only,,current,,Represents how long for data tunnel up. If the value is zero, then tunnel is not set up.
.1.3.6.1.4.1.11.2.14.11.15.2.75.1.2.1.1.6,HPN-ICF-DOT11-ACMT-MIB::hpnicfDot11CtrlTunnelUpTimeTicks,TimeTicks,read-only,,current,,Represents how long control tunnel is up. If the value is zero, then tunnel is not set up.
.1.3.6.1.4.1.11.2.14.11.15.2.75.1.3,HPN-ICF-DOT11-ACMT-MIB::hpnicfDot11ACMtNotifyGroup,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.2.75.1.3.0,HPN-ICF-DOT11-ACMT-MIB::hpnicfDot11ACMtTraps,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.2.75.1.3.0.1,HPN-ICF-DOT11-ACMT-MIB::hpnicfDot11ACMtTunnelSetupTrap,,,,,,This notification is sent by AC when CAPWAP tunnel becomes up. By this way, NMS will immediately know tunnel up event. It is unnecessary to identify whether it is control or data tunnel.
.1.3.6.1.4.1.11.2.14.11.15.2.75.1.3.0.2,HPN-ICF-DOT11-ACMT-MIB::hpnicfDot11ACMtTunnelDownTrap,,,,,,This notification is sent by AC when CAPWAP tunnel becomes down. By this way, NMS will immediately know tunnel down event. It is unnecessary to identify whether it is control or data tunnel.
.1.3.6.1.4.1.11.2.14.11.15.2.75.1.3.0.3,HPN-ICF-DOT11-ACMT-MIB::hpnicfDot11ACMtBackupSwtTrap,,,,,,This trap is sent by AC when AC switches from master to slave or from slave to master.
.1.3.6.1.4.1.11.2.14.11.15.2.75.1.3.0.4,HPN-ICF-DOT11-ACMT-MIB::hpnicfDot11ACLoadBalanceTrap,,,,,,This trap is sent by AC when load-balance is enabled on AC.
.1.3.6.1.4.1.11.2.14.11.15.2.75.1.3.0.5,HPN-ICF-DOT11-ACMT-MIB::hpnicfDot11ACStaFullTrap,,,,,,This notification will be sent when STA is full on AC.
.1.3.6.1.4.1.11.2.14.11.15.2.75.1.3.0.6,HPN-ICF-DOT11-ACMT-MIB::hpnicfDot11ACStatusSwitchTrap,,,,,,This notification will be sent when AC switches from standby to active or from standby to active.
.1.3.6.1.4.1.11.2.14.11.15.2.75.1.3.0.7,HPN-ICF-DOT11-ACMT-MIB::hpnicfDot11RunAPNumOverload,,,,,,The notification will be sent by AC when run AP number exceeds the threshold.
.1.3.6.1.4.1.11.2.14.11.15.2.75.1.3.0.8,HPN-ICF-DOT11-ACMT-MIB::hpnicfDot11RunAPNumOverloadRecover,,,,,,The notification will be sent by AC when run AP number recover normal from overload state.
.1.3.6.1.4.1.11.2.14.11.15.2.75.1.3.1,HPN-ICF-DOT11-ACMT-MIB::hpnicfDot11ACMtTrapVarObjects,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.2.75.1.3.1.1,HPN-ICF-DOT11-ACMT-MIB::hpnicfDot11ACMtTrapTunlDwnInfo,INTEGER,accessible-for-notify,,current,tunnelTimeout(1):keyUpdateFailure(2):apReset(3):apCrash(4):apDeleted(5):apCfgChange(6),Represents the reason for tunnel down. The following values are supported: tunnelTimeout - When AC detects the tunnel is broken, - it will notify NMS. keyUpdateFailure - rekey process is failed, tunnel will be broken. apReset - Administrator reset AP. apCrash - AP reboot for system crash. apDeleted - Delete AP from AC and trigger tunnel down. apCfgChange - The configuration for AP was changed.
.1.3.6.1.4.1.11.2.14.11.15.2.75.1.3.1.2,HPN-ICF-DOT11-ACMT-MIB::hpnicfDot11ACMtTrapTunlUpInfo,INTEGER,accessible-for-notify,,current,up(1),Represents the reason for tunnel up. The following values are supported: up(1) - The AP joined AC. 
.1.3.6.1.4.1.11.2.14.11.15.2.75.1.3.1.3,HPN-ICF-DOT11-ACMT-MIB::hpnicfDot11ACMtTrapBackupSwitchInfo,INTEGER,accessible-for-notify,,current,masterToSlave(1):slaveToMaster(2),Represents status which the AC switches to. The following values are supported: masterToSlave - The AC switches from master to slave. slaveToMaster - The AC switches from slave to master. 
.1.3.6.1.4.1.11.2.14.11.15.2.75.1.3.1.4,HPN-ICF-DOT11-ACMT-MIB::hpnicfDot11ACMtTrapTnlAPName,OCTET,accessible-for-notify,,current,,Represents name of the AP which sets up the tunnel with the AC. 
.1.3.6.1.4.1.11.2.14.11.15.2.75.1.3.1.5,HPN-ICF-DOT11-ACMT-MIB::hpnicfDot11ACMtTrapTnlAPIPAddr,IpAddress,accessible-for-notify,,current,,Represents IP address of the AP which sets up the tunnel with the AC. 
.1.3.6.1.4.1.11.2.14.11.15.2.75.1.3.1.6,HPN-ICF-DOT11-ACMT-MIB::hpnicfDot11LoadBalanceType,INTEGER,accessible-for-notify,,current,traffic(1):session(2),Represents which kind load balance is enabled by AC. The following values are supported: traffic mode load-balancing: traffic snapshot is considered. session mode load-balancing: the number of users associated with the AP/radio is considered. 
.1.3.6.1.4.1.11.2.14.11.15.2.75.1.3.1.7,HPN-ICF-DOT11-ACMT-MIB::hpnicfDot11LoadBalanceThreshold,Integer32,accessible-for-notify,,current,,Represents the value of load balance threshold. 
.1.3.6.1.4.1.11.2.14.11.15.2.75.1.3.1.8,HPN-ICF-DOT11-ACMT-MIB::hpnicfDot11ACMtTrapAPIPv6Addr,OCTET,accessible-for-notify,,current,,Represents IPv6 address of the AP which sets up the tunnel with the AC.
.1.3.6.1.4.1.11.2.14.11.15.2.75.1.3.1.9,HPN-ICF-DOT11-ACMT-MIB::hpnicfDot11ACMtTrapTunlDwnCount,Integer32,accessible-for-notify,,current,,Represents how many times that the tunnel between AC and AP has down.
.1.3.6.1.4.1.11.2.14.11.15.2.75.1.3.1.10,HPN-ICF-DOT11-ACMT-MIB::hpnicfDot11ACMaxStaNum,Integer32,accessible-for-notify,,current,,Represents the max number of STA on AC.
.1.3.6.1.4.1.11.2.14.11.15.2.75.1.3.1.11,HPN-ICF-DOT11-ACMT-MIB::hpnicfDot11ACMtTrapTnlAPSysName,OCTET,accessible-for-notify,,current,,Represents system name of the AP which sets up the tunnel with the AC.
.1.3.6.1.4.1.11.2.14.11.15.2.75.1.3.1.12,HPN-ICF-DOT11-ACMT-MIB::hpnicfDot11ACMtFirstTrapTime,TimeTicks,accessible-for-notify,,current,,Represents the first trap time.
.1.3.6.1.4.1.11.2.14.11.15.2.75.1.3.1.13,HPN-ICF-DOT11-ACMT-MIB::hpnicfDot11ACStatusSwitchInfo,INTEGER,accessible-for-notify,,current,activeToStandby(1):standbyToActive(2),Represents status which the AC switches to. The following values are supported: activeToStandby - The AC switches from active to standby. standbyToActive - The AC switches from standby to active. 
.1.3.6.1.4.1.11.2.14.11.15.2.75.1.3.1.14,HPN-ICF-DOT11-ACMT-MIB::hpnicfDot11SourceACNmsIP,IpAddress,accessible-for-notify,,current,,Represents the NMS IP address of master AC. 
.1.3.6.1.4.1.11.2.14.11.15.2.75.1.3.1.15,HPN-ICF-DOT11-ACMT-MIB::hpnicfDot11ACMtTrapAPMacAddress,OCTET,accessible-for-notify,,current,,Represents the MAC address of an AP.
.1.3.6.1.4.1.11.2.14.11.15.2.75.2,HPN-ICF-DOT11-APMT-MIB::hpnicfDot11APMT,,,,,,This MIB provides AP information which includes AP current object information, AP statistic data. GLOSSARY IEEE 802.11 Standard to encourage interoperability among wireless networking equipment. Access point (AP) Transmitter/receiver (transceiver) device that commonly connects and transports data between a wireless network and a wired network. Access control (AC) To control and manage multi-APs, it will bridge wireless and wired network. Fat AP Applied in the home, SOHO and so on, and it could work independently without help from AC. Fit AP Applied in the enterprise environment, it will work under the control and management from AC. Control And Provisioning of Wireless Access Points Protocol The short name of protocol is CAPWAP. AC will control and manage AP by CAPWAP tunnel protocol defined by IETF. Also, a data tunnel will be set up between AC and AP. BSS IEEE 802.11 Basic Service Set (Radio Cell). The BSS of an AP comprises of the stations directly associating with the AP. Radio The chip set to receive and send wireless signal. Association The service used to establish access point or station mapping and enable STA invocation of the distribution system services. (Wireless clients attempt to connect to access points.) Basic Rate A data rate that is mandatory for client devices to support in order for them to achieve successful association.
.1.3.6.1.4.1.11.2.14.11.15.2.75.2.1,HPN-ICF-DOT11-APMT-MIB::hpnicfDot11APObjectGroup,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.2.75.2.1.1,HPN-ICF-DOT11-APMT-MIB::hpnicfDot11APObjectStatusTable,,not-accessible,,current,,The table will provide the general information about APs in different status.
.1.3.6.1.4.1.11.2.14.11.15.2.75.2.1.1.1,HPN-ICF-DOT11-APMT-MIB::hpnicfDot11APObjectStatusEntry,,not-accessible,hpnicfDot11APID,current,,Each entry contains the general information of an AP.
.1.3.6.1.4.1.11.2.14.11.15.2.75.2.1.1.1.1,HPN-ICF-DOT11-APMT-MIB::hpnicfDot11APID,OCTET,accessible-for-notify,,current,,To uniquely identify each AP, and relation-ship between hpnicfDot11APID and AP device will be static.
.1.3.6.1.4.1.11.2.14.11.15.2.75.2.1.1.1.2,HPN-ICF-DOT11-APMT-MIB::hpnicfDot11APIPAddress,IpAddress,read-only,,current,,Represents the IP address of an AP.
.1.3.6.1.4.1.11.2.14.11.15.2.75.2.1.1.1.3,HPN-ICF-DOT11-APMT-MIB::hpnicfDot11APMacAddress,OCTET,read-only,,current,,Represents the MAC address of an AP.
.1.3.6.1.4.1.11.2.14.11.15.2.75.2.1.1.1.4,HPN-ICF-DOT11-APMT-MIB::hpnicfDot11APOperationStatus,INTEGER,read-only,,current,join(1):joinConfirm(2):download(3):config(4):run(5),Represents operational status of AP. The following values are supported: join - AP is joining to AC. joinConfirm - AC confirm whether permit AP to join. download - AP is downloading software from AC. config - AP and AC exchange configuration before AP - provide WLAN service. run - The WLAN service is ready.
.1.3.6.1.4.1.11.2.14.11.15.2.75.2.1.1.1.5,HPN-ICF-DOT11-APMT-MIB::hpnicfDot11APTemplateNameOfAP,OCTET,read-only,,current,,Represents the name of current AP template configured for AP.
.1.3.6.1.4.1.11.2.14.11.15.2.75.2.1.1.1.6,HPN-ICF-DOT11-APMT-MIB::hpnicfDot11APReset,INTEGER,read-write,,current,true(1):false(2),When read the value from the node 2: Represents the AP can not be reseted. 1: Represents the AP can be reseted. When write the value to the node 1: Represents reseting the AP. Other values are not supported
.1.3.6.1.4.1.11.2.14.11.15.2.75.2.1.1.1.7,HPN-ICF-DOT11-APMT-MIB::hpnicfDot11APCpuUsage,Integer32,read-only,,current,,Represents the current CPU usage for AP.
.1.3.6.1.4.1.11.2.14.11.15.2.75.2.1.1.1.8,HPN-ICF-DOT11-APMT-MIB::hpnicfDot11APConnectionType,INTEGER,read-only,,current,master(1):slave(2):notAvailable(3),Represents the current connection type.
.1.3.6.1.4.1.11.2.14.11.15.2.75.2.1.1.1.9,HPN-ICF-DOT11-APMT-MIB::hpnicfDot11APLastImgDownloadTime,OCTET,read-only,,current,,Represents the time at which the device last downloaded image.
.1.3.6.1.4.1.11.2.14.11.15.2.75.2.1.1.1.10,HPN-ICF-DOT11-APMT-MIB::hpnicfDot11APIPv6Address,OCTET,read-only,,current,,Represents the IPv6 address of AP.
.1.3.6.1.4.1.11.2.14.11.15.2.75.2.1.1.1.11,HPN-ICF-DOT11-APMT-MIB::hpnicfDot11APLastRegisterTime,OCTET,read-only,,current,,Represents the time at which the device last registered with AC.
.1.3.6.1.4.1.11.2.14.11.15.2.75.2.1.1.1.12,HPN-ICF-DOT11-APMT-MIB::hpnicfDot11APResetCM,INTEGER,read-write,,current,normal(0):restart(1),When reading the value from the node normal - Represents the AP cannot be reset. restart - Represents the AP can be reset. When writing the value to the node restart - Represents resetting the AP. Other values are not supported.
.1.3.6.1.4.1.11.2.14.11.15.2.75.2.1.2,HPN-ICF-DOT11-APMT-MIB::hpnicfDot11APObjectTable,,not-accessible,,current,,The table will provide information for APs in the running status.
.1.3.6.1.4.1.11.2.14.11.15.2.75.2.1.2.1,HPN-ICF-DOT11-APMT-MIB::hpnicfDot11APObjectEntry,,not-accessible,hpnicfDot11APObjID,current,,Each entry contains information of an AP in run status.
.1.3.6.1.4.1.11.2.14.11.15.2.75.2.1.2.1.1,HPN-ICF-DOT11-APMT-MIB::hpnicfDot11APObjID,OCTET,not-accessible,,current,,To uniquely identify each AP, and relation-ship between hpnicfDot11APObjID and AP device will be static.
.1.3.6.1.4.1.11.2.14.11.15.2.75.2.1.2.1.2,HPN-ICF-DOT11-APMT-MIB::hpnicfDot11CurrAPIPAddress,IpAddress,read-only,,current,,Represents the IP address of an AP.
.1.3.6.1.4.1.11.2.14.11.15.2.75.2.1.2.1.3,HPN-ICF-DOT11-APMT-MIB::hpnicfDot11CurrAPMacAddress,OCTET,read-only,,current,,Represents the MAC address of an AP.
.1.3.6.1.4.1.11.2.14.11.15.2.75.2.1.2.1.4,HPN-ICF-DOT11-APMT-MIB::hpnicfDot11CurrACPortIndex,Integer32,read-only,,current,,Represents the port on the AC, by which the traffic of this AP comes through. NMS could refer it to access information kept in the MIB-2.
.1.3.6.1.4.1.11.2.14.11.15.2.75.2.1.2.1.5,HPN-ICF-DOT11-APMT-MIB::hpnicfDot11CurrAPMACMode,INTEGER,read-only,,current,split(1):localtunnel(2):localbridge(3):fatAP(4),Represents what MAC mode defined in the CAPWAP is applied. For fat AP, the value will be fatap.
.1.3.6.1.4.1.11.2.14.11.15.2.75.2.1.2.1.6,HPN-ICF-DOT11-APMT-MIB::hpnicfDot11CurrAPTemplateName,OCTET,read-only,,current,,Represents the name of current AP template.
.1.3.6.1.4.1.11.2.14.11.15.2.75.2.1.2.1.7,HPN-ICF-DOT11-APMT-MIB::hpnicfDot11CurrAPStationAssocCount,Integer32,read-only,,current,,Represents the total number of stations which are associating to AP.
.1.3.6.1.4.1.11.2.14.11.15.2.75.2.1.2.1.8,HPN-ICF-DOT11-APMT-MIB::hpnicfDot11CurrAPName,OCTET,read-only,,current,,Represents the name of AP.
.1.3.6.1.4.1.11.2.14.11.15.2.75.2.1.2.1.9,HPN-ICF-DOT11-APMT-MIB::hpnicfDot11CurrAPModelName,OCTET,read-only,,current,,Represents index of WTP model,with it to get AP model information.
.1.3.6.1.4.1.11.2.14.11.15.2.75.2.1.2.1.10,HPN-ICF-DOT11-APMT-MIB::hpnicfDot11CurrAPImageName,OCTET,read-only,,current,,Represents the image file name of AP.
.1.3.6.1.4.1.11.2.14.11.15.2.75.2.1.2.1.11,HPN-ICF-DOT11-APMT-MIB::hpnicfDot11CurrAPSoftwareVersion,OCTET,read-only,,current,,Represents the software version of AP.
.1.3.6.1.4.1.11.2.14.11.15.2.75.2.1.2.1.12,HPN-ICF-DOT11-APMT-MIB::hpnicfDot11CurrAPIPNetMask,IpAddress,read-only,,current,,Represents the IP netmask of AP.
.1.3.6.1.4.1.11.2.14.11.15.2.75.2.1.2.1.13,HPN-ICF-DOT11-APMT-MIB::hpnicfDot11CurrRadioModeSupport,Integer32,read-only,,current,,Represents which radio type supported by the AP. The WLAN system support the following possible radio type. dot11a(1), dot11b(2), dot11g(4), dot11n(8) For a AP,it could support multiple radio types at the same time.So the value of object could combine multiple value of radio type above. For example: For one AP which support both b and g mode radio, when getting the value from the node, the value is 6(2 + 4).
.1.3.6.1.4.1.11.2.14.11.15.2.75.2.1.2.1.14,HPN-ICF-DOT11-APMT-MIB::hpnicfDot11CurrIfNumber,Integer32,read-only,,current,,Represents number of interface of the AP.
.1.3.6.1.4.1.11.2.14.11.15.2.75.2.1.2.1.15,HPN-ICF-DOT11-APMT-MIB::hpnicfDot11CurrAPElementID,Integer32,read-only,,current,,Represents the AP element ID.
.1.3.6.1.4.1.11.2.14.11.15.2.75.2.1.2.1.16,HPN-ICF-DOT11-APMT-MIB::hpnicfDot11CurrAPMode,INTEGER,read-only,,current,bridge(1):route(2),Represents the forward mode of the AP.
.1.3.6.1.4.1.11.2.14.11.15.2.75.2.1.2.1.17,HPN-ICF-DOT11-APMT-MIB::hpnicfDot11CurrAPIPv6Address,OCTET,read-only,,current,,Represents the IPv6 address of AP.
.1.3.6.1.4.1.11.2.14.11.15.2.75.2.1.2.1.18,HPN-ICF-DOT11-APMT-MIB::hpnicfDot11CurrAPSSIDNumber,Integer32,read-only,,current,,Represents the number of SSID configured on AP.
.1.3.6.1.4.1.11.2.14.11.15.2.75.2.1.2.1.19,HPN-ICF-DOT11-APMT-MIB::hpnicfDot11CurrAPManufacturer,OCTET,read-only,,current,,By the 'SMI Network Management Private Enterprise Codes' assigned by the IANA, NMS could know which vendor manufactures the AP.
.1.3.6.1.4.1.11.2.14.11.15.2.75.2.1.2.1.20,HPN-ICF-DOT11-APMT-MIB::hpnicfDot11CurrAPMemorySize,Integer32,read-only,,current,,Represents the size of AP memory.
.1.3.6.1.4.1.11.2.14.11.15.2.75.2.1.2.1.21,HPN-ICF-DOT11-APMT-MIB::hpnicfDot11CurrAPMemSizeInBytes,Integer32,read-only,,current,,Represents the size of AP memory.
.1.3.6.1.4.1.11.2.14.11.15.2.75.2.1.2.1.22,HPN-ICF-DOT11-APMT-MIB::hpnicfDot11CurrAPFlashSize,Integer32,read-only,,current,,Represents the size of AP flash.
.1.3.6.1.4.1.11.2.14.11.15.2.75.2.1.2.1.23,HPN-ICF-DOT11-APMT-MIB::hpnicfDot11CurrAPFlashSizeInBytes,Integer32,read-only,,current,,This object represents the size of AP flash.
.1.3.6.1.4.1.11.2.14.11.15.2.75.2.1.2.1.24,HPN-ICF-DOT11-APMT-MIB::hpnicfDot11CurrAPReleasedVersion,OCTET,read-only,,current,,Represents the released version of AP.
.1.3.6.1.4.1.11.2.14.11.15.2.75.2.1.2.1.25,HPN-ICF-DOT11-APMT-MIB::hpnicfDot11CurrRadioModeSupport2,Integer32,read-only,,current,,Represents which radio type supported by the AP. The WLAN system support the following possible radio type. dot11a(1), dot11b(2), dot11g(4), dot11an(8), dot11gn(16) For a AP,it could support multiple radio types at the same time.So the value of object could combine multiple value of radio type above. For example: For one AP which support both b and g mode radio, when getting the value from the node, the value is 6(2 + 4).
.1.3.6.1.4.1.11.2.14.11.15.2.75.2.1.2.1.26,HPN-ICF-DOT11-APMT-MIB::hpnicfDot11CurrAPCPUTypeCM,OCTET,read-only,,current,,Represents the CPU type of AP.
.1.3.6.1.4.1.11.2.14.11.15.2.75.2.1.2.1.27,HPN-ICF-DOT11-APMT-MIB::hpnicfDot11CurrAPMemoryTypeCM,OCTET,read-only,,current,,Represents the memory card type of AP.
.1.3.6.1.4.1.11.2.14.11.15.2.75.2.1.2.1.28,HPN-ICF-DOT11-APMT-MIB::hpnicfDot11CurrAPBSSIDNumberCM,Integer32,read-only,,current,,Represents the number of BSSID configured on AP.
.1.3.6.1.4.1.11.2.14.11.15.2.75.2.1.3,HPN-ICF-DOT11-APMT-MIB::hpnicfDot11APRadioTable,,not-accessible,,current,,The table will describe the radio information of AP. The AP here will be in running status.
.1.3.6.1.4.1.11.2.14.11.15.2.75.2.1.3.1,HPN-ICF-DOT11-APMT-MIB::hpnicfDot11APRadioEntry,,not-accessible,hpnicfDot11CurAPID:hpnicfDot11RadioID,current,,Each entry contains the information of each radio of a specific AP.
.1.3.6.1.4.1.11.2.14.11.15.2.75.2.1.3.1.1,HPN-ICF-DOT11-APMT-MIB::hpnicfDot11CurAPID,OCTET,not-accessible,,current,,To uniquely identify a AP in running status.
.1.3.6.1.4.1.11.2.14.11.15.2.75.2.1.3.1.2,HPN-ICF-DOT11-APMT-MIB::hpnicfDot11RadioID,Integer32,accessible-for-notify,,current,,Represents each radio.
.1.3.6.1.4.1.11.2.14.11.15.2.75.2.1.3.1.3,HPN-ICF-DOT11-APMT-MIB::hpnicfDot11AdminStatus,INTEGER,read-only,,current,true(1):false(2),Represents the administrator status of radio.
.1.3.6.1.4.1.11.2.14.11.15.2.75.2.1.3.1.4,HPN-ICF-DOT11-APMT-MIB::hpnicfDot11OperStatus,INTEGER,read-only,,current,true(1):false(2),Represents the operational status of radio.
.1.3.6.1.4.1.11.2.14.11.15.2.75.2.1.3.1.5,HPN-ICF-DOT11-APMT-MIB::hpnicfDot11Channel,Integer32,read-only,,current,,Represents the current channel allocation for radio.
.1.3.6.1.4.1.11.2.14.11.15.2.75.2.1.3.1.6,HPN-ICF-DOT11-APMT-MIB::hpnicfDot11TxPowerLevel,Integer32,read-only,,current,,Represents the current transmit power level for radio.
.1.3.6.1.4.1.11.2.14.11.15.2.75.2.1.3.1.7,HPN-ICF-DOT11-APMT-MIB::hpnicfDot11APRadioIfIndex,Integer32,read-only,,current,,Represents the interface index for the radio.
.1.3.6.1.4.1.11.2.14.11.15.2.75.2.1.3.1.8,HPN-ICF-DOT11-APMT-MIB::hpnicfDot11AntennaGain,Integer32,read-only,,current,,Represents the current gain for antenna.
.1.3.6.1.4.1.11.2.14.11.15.2.75.2.1.3.1.9,HPN-ICF-DOT11-APMT-MIB::hpnicfDot11MaxBandwidth,Integer32,read-only,,current,,Represents the maximum bandwidth for the radio.
.1.3.6.1.4.1.11.2.14.11.15.2.75.2.1.3.1.10,HPN-ICF-DOT11-APMT-MIB::hpnicfDot11ResourceUseRatio,Integer32,read-only,,current,,Represents the ratio of radio resource usage.
.1.3.6.1.4.1.11.2.14.11.15.2.75.2.1.3.1.11,HPN-ICF-DOT11-APMT-MIB::hpnicfDot11RadioModeSupport,Unsigned32,read-only,,current,,Represents radio type supported by the radio. The WLAN system supports the following possible radio type: dot11a(1), dot11b(2), dot11g(4), dot11gn(16), dot11an(32). For the radio, it could support multiple radio types at the same time. So the value of this object could combine multiple values of radio type above. For example: For one radio which supports both dot11b and dot11g mode, when get value from the object, the value is 5(1 + 4).
.1.3.6.1.4.1.11.2.14.11.15.2.75.2.1.3.1.12,HPN-ICF-DOT11-APMT-MIB::hpnicfDot11TxPowerLevel2,Integer32,read-only,,current,,The TxPowerLevel N currently being used to transmit data.
.1.3.6.1.4.1.11.2.14.11.15.2.75.2.1.3.1.13,HPN-ICF-DOT11-APMT-MIB::hpnicfDot11PowerMgmtStatus,INTEGER,read-only,,current,true(1):false(2),Represents status of power management of the radio.
.1.3.6.1.4.1.11.2.14.11.15.2.75.2.1.3.1.14,HPN-ICF-DOT11-APMT-MIB::hpnicfDot11ChannelSwitchTimes,Counter32,read-only,,current,,Represents the channel switch times.
.1.3.6.1.4.1.11.2.14.11.15.2.75.2.1.3.1.15,HPN-ICF-DOT11-APMT-MIB::hpnicfDot11AntennaType,OCTET,read-only,,current,,Represents type of the antenna which radio used.
.1.3.6.1.4.1.11.2.14.11.15.2.75.2.1.3.1.16,HPN-ICF-DOT11-APMT-MIB::hpnicfDot11DiversitySelectionRx,INTEGER,read-only,,current,true(1):false(2),Represents the diversity selection received.
.1.3.6.1.4.1.11.2.14.11.15.2.75.2.1.3.1.17,HPN-ICF-DOT11-APMT-MIB::hpnicfDot11MaxTxPwrLvl,OCTET,read-only,,current,,Represents the maximum transmit power.
.1.3.6.1.4.1.11.2.14.11.15.2.75.2.1.3.1.18,HPN-ICF-DOT11-APMT-MIB::hpnicfDot11PwrAttRange,Integer32,read-only,,current,,Represents the range of power attenuation.
.1.3.6.1.4.1.11.2.14.11.15.2.75.2.1.3.1.19,HPN-ICF-DOT11-APMT-MIB::hpnicfDot11AvgRxSignalStrength,Integer32,read-only,,current,,Represents the average received signal strength.
.1.3.6.1.4.1.11.2.14.11.15.2.75.2.1.3.1.20,HPN-ICF-DOT11-APMT-MIB::hpnicfDot11HighestRxSignalStrength,Integer32,read-only,,current,,Represents the highest received signal strength.
.1.3.6.1.4.1.11.2.14.11.15.2.75.2.1.3.1.21,HPN-ICF-DOT11-APMT-MIB::hpnicfDot11LowestRxSignalStrength,Integer32,read-only,,current,,Represents the lowest received signal strength.
.1.3.6.1.4.1.11.2.14.11.15.2.75.2.1.3.1.22,HPN-ICF-DOT11-APMT-MIB::hpnicfDot11RadioIfUpdownTimes,Counter32,read-only,,current,,Represents the up/down times on radio interface.
.1.3.6.1.4.1.11.2.14.11.15.2.75.2.1.3.1.23,HPN-ICF-DOT11-APMT-MIB::hpnicfDot11RadioIfLastChange,TimeTicks,read-only,,current,,Represents time at last change that occurred on radio interface.
.1.3.6.1.4.1.11.2.14.11.15.2.75.2.1.3.1.24,HPN-ICF-DOT11-APMT-MIB::hpnicfDot11RadioModeSupport2,Unsigned32,read-only,,current,,Represents radio type supported by the radio. The WLAN system supports the following possible radio type: dot11a(1), dot11b(2), dot11g(4), dot11an(8), dot11gn(16). For the radio, it could support multiple radio types at the same time. So the value of this object could combine multiple values of radio type above. For example: For one radio which supports both dot11b and dot11g mode, when get value from the object, the value is 5(1 + 4).
.1.3.6.1.4.1.11.2.14.11.15.2.75.2.1.3.1.25,HPN-ICF-DOT11-APMT-MIB::hpnicfDot11OperStatusCM,INTEGER,read-only,,current,up(1):down(2):testing(3):admindown(4),Represents the operational status of radio.
.1.3.6.1.4.1.11.2.14.11.15.2.75.2.1.4,HPN-ICF-DOT11-APMT-MIB::hpnicfDot11APBSSTable,,not-accessible,,current,,After AP connect to AC and get AP template configuration, it will create BSS data structure for each radio. The table will describe BSS information of AP and service policy as per BSS.
.1.3.6.1.4.1.11.2.14.11.15.2.75.2.1.4.1,HPN-ICF-DOT11-APMT-MIB::hpnicfDot11APBSSEntry,,not-accessible,hpnicfDot11CurAPID:hpnicfDot11RadioID:hpnicfDot11WlanID,current,,Each entry contains information of each BSS for specific radio.
.1.3.6.1.4.1.11.2.14.11.15.2.75.2.1.4.1.1,HPN-ICF-DOT11-APMT-MIB::hpnicfDot11WlanID,Integer32,not-accessible,,current,,Represents ID of a specific ESS.
.1.3.6.1.4.1.11.2.14.11.15.2.75.2.1.4.1.2,HPN-ICF-DOT11-APMT-MIB::hpnicfDot11BSSID,OCTET,read-only,,current,,As MAC Address format, it is to identify BSS.
.1.3.6.1.4.1.11.2.14.11.15.2.75.2.1.4.1.3,HPN-ICF-DOT11-APMT-MIB::hpnicfDot11CurrSvcPolicyID,Integer32,read-only,,current,,Represents the ID of each service policy used by the AP.
.1.3.6.1.4.1.11.2.14.11.15.2.75.2.1.4.1.4,HPN-ICF-DOT11-APMT-MIB::hpnicfDot11SSID,OCTET,read-only,,current,,This object represents the SSID corresponding to this BSS.
.1.3.6.1.4.1.11.2.14.11.15.2.75.2.1.4.1.5,HPN-ICF-DOT11-APMT-MIB::hpnicfDot11CurrSSIDResourceUseRatio,Integer32,read-only,,current,,Represents the ratio of resource usage of curr SSID
.1.3.6.1.4.1.11.2.14.11.15.2.75.2.1.4.1.6,HPN-ICF-DOT11-APMT-MIB::hpnicfDot11APEssVlanId,Integer32,read-only,,current,,This object represents the VlanID of the interface ESS corresponding to this BSS.
.1.3.6.1.4.1.11.2.14.11.15.2.75.2.1.5,HPN-ICF-DOT11-APMT-MIB::hpnicfDot11APModelTable,,not-accessible,,current,,The table defines the capability information for a specific kind of AP.
.1.3.6.1.4.1.11.2.14.11.15.2.75.2.1.5.1,HPN-ICF-DOT11-APMT-MIB::hpnicfDot11APModelEntry,,not-accessible,IMPLIEDhpnicfDot11APModelAlias,current,,Each entry contains capability information for a specific kind of AP.
.1.3.6.1.4.1.11.2.14.11.15.2.75.2.1.5.1.1,HPN-ICF-DOT11-APMT-MIB::hpnicfDot11APModelAlias,OCTET,not-accessible,,current,,Represents alias of AP model name.
.1.3.6.1.4.1.11.2.14.11.15.2.75.2.1.5.1.2,HPN-ICF-DOT11-APMT-MIB::hpnicfDot11APModelName,OCTET,read-only,,current,,Represents AP model name(like WA2100).
.1.3.6.1.4.1.11.2.14.11.15.2.75.2.1.5.1.3,HPN-ICF-DOT11-APMT-MIB::hpnicfDot11RadioNumSupport,Integer32,read-only,,current,,Represents how many radios the specific AP model could support.
.1.3.6.1.4.1.11.2.14.11.15.2.75.2.1.5.1.4,HPN-ICF-DOT11-APMT-MIB::hpnicfDot11StationNumSupport,Integer32,read-only,,current,,Represents how many station could be supported by a specific AP model.
.1.3.6.1.4.1.11.2.14.11.15.2.75.2.1.5.1.5,HPN-ICF-DOT11-APMT-MIB::hpnicfDot11MACModeSupport,INTEGER,read-only,,current,split(1):localtunnel(2):localbridge(3):fatAP(4),Represents the MAC mode type could be supported by a specific AP model.
.1.3.6.1.4.1.11.2.14.11.15.2.75.2.1.5.1.6,HPN-ICF-DOT11-APMT-MIB::hpnicfDot11APManufacturer,OCTET,read-only,,current,,By the 'SMI Network Management Private Enterprise Codes' assigned by the IANA, NMS could know which vendor manufactures the AP.
.1.3.6.1.4.1.11.2.14.11.15.2.75.2.1.5.1.7,HPN-ICF-DOT11-APMT-MIB::hpnicfDot11APCPUType,OCTET,read-only,,current,,Represents the CPU type of AP
.1.3.6.1.4.1.11.2.14.11.15.2.75.2.1.5.1.8,HPN-ICF-DOT11-APMT-MIB::hpnicfDot11APCPUClockSpeed,Unsigned32,read-only,,current,,Represents the clock speed of CPU.
.1.3.6.1.4.1.11.2.14.11.15.2.75.2.1.5.1.9,HPN-ICF-DOT11-APMT-MIB::hpnicfDot11APMemoryType,OCTET,read-only,,current,,Represents the memory card type of AP
.1.3.6.1.4.1.11.2.14.11.15.2.75.2.1.5.1.11,HPN-ICF-DOT11-APMT-MIB::hpnicfDot11APFlashType,OCTET,read-only,,current,,Represents the flash card type of AP
.1.3.6.1.4.1.11.2.14.11.15.2.75.2.1.5.1.12,HPN-ICF-DOT11-APMT-MIB::hpnicfDot11APFlashSize,Unsigned32,read-only,,current,,Represents the size of AP flash card.
.1.3.6.1.4.1.11.2.14.11.15.2.75.2.1.5.1.13,HPN-ICF-DOT11-APMT-MIB::hpnicfDot11APMemSize,Gauge32,read-only,,current,,Represents the size of AP memory card.
.1.3.6.1.4.1.11.2.14.11.15.2.75.2.1.5.1.14,HPN-ICF-DOT11-APMT-MIB::hpnicfDot11APFlashSizeInBytes,Unsigned32,read-only,,current,,This object represents the size of AP flash card in bytes.
.1.3.6.1.4.1.11.2.14.11.15.2.75.2.1.5.1.20,HPN-ICF-DOT11-APMT-MIB::hpnicfDot11APMemorySize,Unsigned32,read-only,,current,,Represents the size of AP memory card.
.1.3.6.1.4.1.11.2.14.11.15.2.75.2.1.6,HPN-ICF-DOT11-APMT-MIB::hpnicfDot11APIfTable,,not-accessible,,current,,This table represents the AP interface informations.
.1.3.6.1.4.1.11.2.14.11.15.2.75.2.1.6.1,HPN-ICF-DOT11-APMT-MIB::hpnicfDot11APIfEntry,,not-accessible,hpnicfDot11APObjID:hpnicfDot11APIfIndex,current,,Each entry of the table will provide data for the interface of AP.
.1.3.6.1.4.1.11.2.14.11.15.2.75.2.1.6.1.1,HPN-ICF-DOT11-APMT-MIB::hpnicfDot11APIfIndex,Integer32,not-accessible,,current,,Represents the index for a interface.
.1.3.6.1.4.1.11.2.14.11.15.2.75.2.1.6.1.2,HPN-ICF-DOT11-APMT-MIB::hpnicfDot11APIfDescr,OCTET,read-only,,current,,Represents the interface description for a interface.
.1.3.6.1.4.1.11.2.14.11.15.2.75.2.1.6.1.3,HPN-ICF-DOT11-APMT-MIB::hpnicfDot11APIfType,Integer32,read-only,,current,,Represents the interface type for a interface.
.1.3.6.1.4.1.11.2.14.11.15.2.75.2.1.6.1.4,HPN-ICF-DOT11-APMT-MIB::hpnicfDot11APIfMtu,Integer32,read-write,,current,,Represents size of the largest datagram which can be sent/received on the interface, specified in octets.
.1.3.6.1.4.1.11.2.14.11.15.2.75.2.1.6.1.5,HPN-ICF-DOT11-APMT-MIB::hpnicfDot11APIfPHYAddress,OCTET,read-only,,current,,Represents the PHY address of interface.
.1.3.6.1.4.1.11.2.14.11.15.2.75.2.1.6.1.6,HPN-ICF-DOT11-APMT-MIB::hpnicfDot11APIfSpeed,Integer32,read-only,,current,,Represents maximum bandwidth of this interface.
.1.3.6.1.4.1.11.2.14.11.15.2.75.2.1.6.1.7,HPN-ICF-DOT11-APMT-MIB::hpnicfDot11APIfInDataRate,Integer32,read-only,,current,,Represents the average input data rate of this interface in latest 300 seconds.
.1.3.6.1.4.1.11.2.14.11.15.2.75.2.1.6.1.8,HPN-ICF-DOT11-APMT-MIB::hpnicfDot11APIfOutDataRate,Integer32,read-only,,current,,Represents the average output data rate of this interface in latest 300 seconds.
.1.3.6.1.4.1.11.2.14.11.15.2.75.2.1.6.1.9,HPN-ICF-DOT11-APMT-MIB::hpnicfDot11APIfSpeedKbps,Gauge32,read-only,,current,,Represents maximum bandwidth of this interface.
.1.3.6.1.4.1.11.2.14.11.15.2.75.2.1.6.1.10,HPN-ICF-DOT11-APMT-MIB::hpnicfDot11APIfTypeCM,Integer32,read-only,,current,,Represents the interface type.
.1.3.6.1.4.1.11.2.14.11.15.2.75.2.1.7,HPN-ICF-DOT11-APMT-MIB::hpnicfDot11APSSIDObjectTable,,not-accessible,,current,,This table provides BSSID number configuration information based on SSID.
.1.3.6.1.4.1.11.2.14.11.15.2.75.2.1.7.1,HPN-ICF-DOT11-APMT-MIB::hpnicfDot11APSSIDObjectEntry,,not-accessible,hpnicfDot11APConfigSPID,current,,Each entry provides BSSID number configuration information of a SSID.
.1.3.6.1.4.1.11.2.14.11.15.2.75.2.1.7.1.1,HPN-ICF-DOT11-APMT-MIB::hpnicfDot11APConfigSPID,Integer32,not-accessible,,current,,Represents the service policy ID.
.1.3.6.1.4.1.11.2.14.11.15.2.75.2.1.7.1.2,HPN-ICF-DOT11-APMT-MIB::hpnicfDot11APConfigSSIDName,OCTET,read-only,,current,,Represents the SSID name of this service policy.
.1.3.6.1.4.1.11.2.14.11.15.2.75.2.1.7.1.3,HPN-ICF-DOT11-APMT-MIB::hpnicfDot11APConfigBSSIDNum,Integer32,read-only,,current,,Represents the number of BSSID that be configured with current SSID.
.1.3.6.1.4.1.11.2.14.11.15.2.75.2.1.7.1.4,HPN-ICF-DOT11-APMT-MIB::hpnicfDot11APConfigPortalStaNum,Integer32,read-only,,current,,Represents the total number of associated protal stations with current SSID.
.1.3.6.1.4.1.11.2.14.11.15.2.75.2.1.8,HPN-ICF-DOT11-APMT-MIB::hpnicfDot11APSysInfoTable,,not-accessible,,current,,The table provides the system information of the AP.
.1.3.6.1.4.1.11.2.14.11.15.2.75.2.1.8.1,HPN-ICF-DOT11-APMT-MIB::hpnicfDot11APSysInfoEntry,,not-accessible,hpnicfDot11APElementIndex,current,,Each entry provides system information of an AP.
.1.3.6.1.4.1.11.2.14.11.15.2.75.2.1.8.1.1,HPN-ICF-DOT11-APMT-MIB::hpnicfDot11APSysUpTime,TimeTicks,read-only,,current,,Represents how long AP has been powered on.
.1.3.6.1.4.1.11.2.14.11.15.2.75.2.1.8.1.2,HPN-ICF-DOT11-APMT-MIB::hpnicfDot11APCPURTUsage,Integer32,read-only,,current,,Represents the CPU real time usage for AP.
.1.3.6.1.4.1.11.2.14.11.15.2.75.2.1.8.1.3,HPN-ICF-DOT11-APMT-MIB::hpnicfDot11APCPUAvgUsage,Integer32,read-only,,current,,Represents the CPU average usage for AP.
.1.3.6.1.4.1.11.2.14.11.15.2.75.2.1.8.1.4,HPN-ICF-DOT11-APMT-MIB::hpnicfDot11APMemRTUsage,Integer32,read-only,,current,,Represents the memory real time usage for AP.
.1.3.6.1.4.1.11.2.14.11.15.2.75.2.1.8.1.5,HPN-ICF-DOT11-APMT-MIB::hpnicfDot11APMemAvgUsage,Integer32,read-only,,current,,Represents the average memory usage for AP.
.1.3.6.1.4.1.11.2.14.11.15.2.75.2.1.8.1.6,HPN-ICF-DOT11-APMT-MIB::hpnicfDot11APIPAddressGateway,IpAddress,read-only,,current,,Represents the IP address gateway for AP.
.1.3.6.1.4.1.11.2.14.11.15.2.75.2.1.8.1.7,HPN-ICF-DOT11-APMT-MIB::hpnicfDot11APACAssociateStatus,INTEGER,read-only,,current,associated(1):deassociated(2):downloadingImage(3),Represents associate status of AP and AC.
.1.3.6.1.4.1.11.2.14.11.15.2.75.2.1.8.1.8,HPN-ICF-DOT11-APMT-MIB::hpnicfDot11APManuBuildInfo,OCTET,read-only,,current,,Represents the device version information for AP.
.1.3.6.1.4.1.11.2.14.11.15.2.75.2.1.8.1.9,HPN-ICF-DOT11-APMT-MIB::hpnicfDot11APFlashFreeSize,Unsigned32,read-only,,current,,Represents the free size of AP flash card.
.1.3.6.1.4.1.11.2.14.11.15.2.75.2.1.8.1.10,HPN-ICF-DOT11-APMT-MIB::hpnicfDot11APTemperature,Integer32,read-only,,current,,Represents the device temperature information for AP.
.1.3.6.1.4.1.11.2.14.11.15.2.75.2.1.9,HPN-ICF-DOT11-APMT-MIB::hpnicfDot11APIdleListTable,,not-accessible,,current,,This table provides the list of idle AP.
.1.3.6.1.4.1.11.2.14.11.15.2.75.2.1.9.1,HPN-ICF-DOT11-APMT-MIB::hpnicfDot11APIdleListEntry,,not-accessible,hpnicfDot11APIdleTemplateName,current,,Each entry provides information of a idle AP.
.1.3.6.1.4.1.11.2.14.11.15.2.75.2.1.9.1.1,HPN-ICF-DOT11-APMT-MIB::hpnicfDot11APIdleTemplateName,OCTET,not-accessible,,current,,Represents the name of idle AP template.
.1.3.6.1.4.1.11.2.14.11.15.2.75.2.1.9.1.2,HPN-ICF-DOT11-APMT-MIB::hpnicfDot11APIdleSerialID,OCTET,read-only,,current,,Represents AP serial ID.
.1.3.6.1.4.1.11.2.14.11.15.2.75.2.1.10,HPN-ICF-DOT11-APMT-MIB::hpnicfDot11APSysInfoByAPIDTable,,not-accessible,,current,,The table provides the system information of the AP.
.1.3.6.1.4.1.11.2.14.11.15.2.75.2.1.10.1,HPN-ICF-DOT11-APMT-MIB::hpnicfDot11APSysInfoByAPIDEntry,,not-accessible,hpnicfDot11APObjID,current,,Each entry provides system information of an AP.
.1.3.6.1.4.1.11.2.14.11.15.2.75.2.1.10.1.1,HPN-ICF-DOT11-APMT-MIB::hpnicfDot11APSysUpTime2,TimeTicks,read-only,,current,,Represents how long AP has been powered on.
.1.3.6.1.4.1.11.2.14.11.15.2.75.2.1.10.1.2,HPN-ICF-DOT11-APMT-MIB::hpnicfDot11APCPURTUsage2,Integer32,read-only,,current,,Represents the CPU real time usage for AP.
.1.3.6.1.4.1.11.2.14.11.15.2.75.2.1.10.1.3,HPN-ICF-DOT11-APMT-MIB::hpnicfDot11APCPUAvgUsage2,Integer32,read-only,,current,,Represents the CPU average usage for AP.
.1.3.6.1.4.1.11.2.14.11.15.2.75.2.1.10.1.4,HPN-ICF-DOT11-APMT-MIB::hpnicfDot11APMemRTUsage2,Integer32,read-only,,current,,Represents the memory real time usage for AP.
.1.3.6.1.4.1.11.2.14.11.15.2.75.2.1.10.1.5,HPN-ICF-DOT11-APMT-MIB::hpnicfDot11APMemAvgUsage2,Integer32,read-only,,current,,Represents the average memory usage for AP.
.1.3.6.1.4.1.11.2.14.11.15.2.75.2.1.10.1.6,HPN-ICF-DOT11-APMT-MIB::hpnicfDot11APIPAddressGateway2,IpAddress,read-only,,current,,Represents the IP address gateway for AP.
.1.3.6.1.4.1.11.2.14.11.15.2.75.2.1.10.1.7,HPN-ICF-DOT11-APMT-MIB::hpnicfDot11APACAssociateStatus2,INTEGER,read-only,,current,associated(1):deassociated(2):downloadingImage(3),Represents associate status of AP and AC.
.1.3.6.1.4.1.11.2.14.11.15.2.75.2.1.10.1.8,HPN-ICF-DOT11-APMT-MIB::hpnicfDot11APManuBuildInfo2,OCTET,read-only,,current,,Represents the device version information for AP.
.1.3.6.1.4.1.11.2.14.11.15.2.75.2.1.10.1.9,HPN-ICF-DOT11-APMT-MIB::hpnicfDot11APFlashFreeSize2,Unsigned32,read-only,,current,,Represents the free size of AP flash card.
.1.3.6.1.4.1.11.2.14.11.15.2.75.2.1.10.1.10,HPN-ICF-DOT11-APMT-MIB::hpnicfDot11APTemperature2,Integer32,read-only,,current,,Represents the device temperature information for AP.
.1.3.6.1.4.1.11.2.14.11.15.2.75.2.1.10.1.11,HPN-ICF-DOT11-APMT-MIB::hpnicfDot11APMacAddress2,OCTET,read-only,,current,,Represents the MAC address of AP.
.1.3.6.1.4.1.11.2.14.11.15.2.75.2.1.10.1.12,HPN-ICF-DOT11-APMT-MIB::hpnicfDot11APACAssociateStatusCM,INTEGER,read-only,,current,deassociated(0):associated(1),Represents associate status of AP and AC.
.1.3.6.1.4.1.11.2.14.11.15.2.75.2.2,HPN-ICF-DOT11-APMT-MIB::hpnicfDot11APStatisGroup,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.2.75.2.2.1,HPN-ICF-DOT11-APMT-MIB::hpnicfDot11APRxStatisTable,,not-accessible,,current,,The table will provide the receiving statistic for a specific radio of AP.
.1.3.6.1.4.1.11.2.14.11.15.2.75.2.2.1.1,HPN-ICF-DOT11-APMT-MIB::hpnicfDot11APRxStatisEntry,,not-accessible,hpnicfDot11CurAPID:hpnicfDot11RadioID,current,,Each entry of the table will provide the statistic data for each radio of a specific AP.
.1.3.6.1.4.1.11.2.14.11.15.2.75.2.2.1.1.1,HPN-ICF-DOT11-APMT-MIB::hpnicfDot11RxFrameDupCnt,Counter32,read-only,,current,,Represents the number of duplicate frames reception.
.1.3.6.1.4.1.11.2.14.11.15.2.75.2.2.1.1.2,HPN-ICF-DOT11-APMT-MIB::hpnicfDot11RxFrameCnt,Counter32,read-only,,current,,Represents the number of frames reception.
.1.3.6.1.4.1.11.2.14.11.15.2.75.2.2.1.1.3,HPN-ICF-DOT11-APMT-MIB::hpnicfDot11RxUcastFrameCnt,Counter32,read-only,,current,,Represents the number of unicast frames reception.
.1.3.6.1.4.1.11.2.14.11.15.2.75.2.2.1.1.4,HPN-ICF-DOT11-APMT-MIB::hpnicfDot11RxBcastFrameCnt,Counter32,read-only,,current,,Represents the number of broadcast frames reception.
.1.3.6.1.4.1.11.2.14.11.15.2.75.2.2.1.1.5,HPN-ICF-DOT11-APMT-MIB::hpnicfDot11RxMcastFrameCnt,Counter32,read-only,,current,,Represents the number of multicast frames reception.
.1.3.6.1.4.1.11.2.14.11.15.2.75.2.2.1.1.6,HPN-ICF-DOT11-APMT-MIB::hpnicfDot11RxDiscardFrameCnt,Counter32,read-only,,current,,Represents the number of frames discarded by AP.
.1.3.6.1.4.1.11.2.14.11.15.2.75.2.2.1.1.7,HPN-ICF-DOT11-APMT-MIB::hpnicfDot11RxFragCnt,Counter32,read-only,,current,,Represents the number of frame fragments reception.
.1.3.6.1.4.1.11.2.14.11.15.2.75.2.2.1.1.8,HPN-ICF-DOT11-APMT-MIB::hpnicfDot11RxFcsErrCnt,Counter32,read-only,,current,,Represents the number of FCS error frames reception.
.1.3.6.1.4.1.11.2.14.11.15.2.75.2.2.1.1.9,HPN-ICF-DOT11-APMT-MIB::hpnicfDot11RxFrameBytes,Counter32,read-only,,current,,Represents the bytes of frames reception.
.1.3.6.1.4.1.11.2.14.11.15.2.75.2.2.1.1.10,HPN-ICF-DOT11-APMT-MIB::hpnicfDot11RxUcastFrameBytes,Counter32,read-only,,current,,Represents the bytes of unicast frames reception.
.1.3.6.1.4.1.11.2.14.11.15.2.75.2.2.1.1.11,HPN-ICF-DOT11-APMT-MIB::hpnicfDot11RxBcastFrameBytes,Counter32,read-only,,current,,Represents the bytes of broadcast frames reception.
.1.3.6.1.4.1.11.2.14.11.15.2.75.2.2.1.1.12,HPN-ICF-DOT11-APMT-MIB::hpnicfDot11RxMcastFrameBytes,Counter32,read-only,,current,,Represents the bytes of multicast frames reception.
.1.3.6.1.4.1.11.2.14.11.15.2.75.2.2.1.1.13,HPN-ICF-DOT11-APMT-MIB::hpnicfDot11RxDiscardFrameBytes,Counter32,read-only,,current,,Represents the bytes of frames discarded by AP.
.1.3.6.1.4.1.11.2.14.11.15.2.75.2.2.1.1.14,HPN-ICF-DOT11-APMT-MIB::hpnicfDot11RxMgmtFrameCnt,Counter32,read-only,,current,,Represents the number of management frames reception.
.1.3.6.1.4.1.11.2.14.11.15.2.75.2.2.1.1.15,HPN-ICF-DOT11-APMT-MIB::hpnicfDot11RxCtrlFrameCnt,Counter32,read-only,,current,,Represents the number of control frames reception.
.1.3.6.1.4.1.11.2.14.11.15.2.75.2.2.1.1.16,HPN-ICF-DOT11-APMT-MIB::hpnicfDot11RxDataFrameCnt,Counter32,read-only,,current,,Represents the number of data frames reception.
.1.3.6.1.4.1.11.2.14.11.15.2.75.2.2.1.1.17,HPN-ICF-DOT11-APMT-MIB::hpnicfDot11RxDecryptErrorCnt,Counter32,read-only,,current,,Represents the number of decryption error.
.1.3.6.1.4.1.11.2.14.11.15.2.75.2.2.1.1.18,HPN-ICF-DOT11-APMT-MIB::hpnicfDot11RxAuthenFrameCnt,Counter32,read-only,,current,,Represents the number of authentication frame reception.
.1.3.6.1.4.1.11.2.14.11.15.2.75.2.2.1.1.19,HPN-ICF-DOT11-APMT-MIB::hpnicfDot11RxAssociateFrameCnt,Counter32,read-only,,current,,Represents the number of associate frame reception.
.1.3.6.1.4.1.11.2.14.11.15.2.75.2.2.1.1.20,HPN-ICF-DOT11-APMT-MIB::hpnicfDot11RxFrameErrorRatio,Integer32,read-only,,current,,Represents the ratio of error frame.
.1.3.6.1.4.1.11.2.14.11.15.2.75.2.2.1.1.21,HPN-ICF-DOT11-APMT-MIB::hpnicfDot11RxPhyErrorCnt,Counter32,read-only,,current,,Represents the number of physical reception error.
.1.3.6.1.4.1.11.2.14.11.15.2.75.2.2.1.1.22,HPN-ICF-DOT11-APMT-MIB::hpnicfDot11RxMICErrorCnt,Counter32,read-only,,current,,Represents the number of MIC verification error.
.1.3.6.1.4.1.11.2.14.11.15.2.75.2.2.1.1.23,HPN-ICF-DOT11-APMT-MIB::hpnicfDot11RxDataFrameBytes,Counter32,read-only,,current,,Represents the bytes of data frames reception.
.1.3.6.1.4.1.11.2.14.11.15.2.75.2.2.1.1.24,HPN-ICF-DOT11-APMT-MIB::hpnicfDot11RadioRxAverSnr,Integer32,read-only,,current,,Represents the average signal noise rate of this radio.
.1.3.6.1.4.1.11.2.14.11.15.2.75.2.2.1.1.25,HPN-ICF-DOT11-APMT-MIB::hpnicfDot11RxPayloadBytes,Counter32,read-only,,current,,Represents the payload bytes of data frames reception.
.1.3.6.1.4.1.11.2.14.11.15.2.75.2.2.1.1.26,HPN-ICF-DOT11-APMT-MIB::hpnicfDot11RxTrafficSpeed,Integer32,read-only,,current,,Represents the bytes of frames reception per second.
.1.3.6.1.4.1.11.2.14.11.15.2.75.2.2.1.1.27,HPN-ICF-DOT11-APMT-MIB::hpnicfDot11RxUcastDataFrameCnt,Counter64,read-only,,current,,Represents the number of unicast data frames reception.
.1.3.6.1.4.1.11.2.14.11.15.2.75.2.2.1.1.28,HPN-ICF-DOT11-APMT-MIB::hpnicfDot11RxNUcastDataFrameCnt,Counter64,read-only,,current,,Represents the number of non-unicast data frames reception.
.1.3.6.1.4.1.11.2.14.11.15.2.75.2.2.1.1.29,HPN-ICF-DOT11-APMT-MIB::hpnicfDot11RxTotalDiscardFrameCnt,Counter64,read-only,,current,,Represents the number of total frames discarded by radio.
.1.3.6.1.4.1.11.2.14.11.15.2.75.2.2.1.1.30,HPN-ICF-DOT11-APMT-MIB::hpnicfDot11RxTotalIPCheckErrPacketCnt,Counter64,read-only,,current,,Represents the total number of IP checksum error packets received through the current radio.
.1.3.6.1.4.1.11.2.14.11.15.2.75.2.2.1.1.31,HPN-ICF-DOT11-APMT-MIB::hpnicfDot11RxSignalStrengthPacketCntCM,OCTET,read-only,,current,,Represents the count of received packets according to signal strength.
.1.3.6.1.4.1.11.2.14.11.15.2.75.2.2.1.1.32,HPN-ICF-DOT11-APMT-MIB::hpnicfDot11RxDataFrameCntCM,Counter32,read-only,,current,,Represents the number of received data frames, excluding retransmitted frames.
.1.3.6.1.4.1.11.2.14.11.15.2.75.2.2.2,HPN-ICF-DOT11-APMT-MIB::hpnicfDot11APTxStatisTable,,not-accessible,,current,,The table will provide the transmission statistic for a specific radio of AP.
.1.3.6.1.4.1.11.2.14.11.15.2.75.2.2.2.1,HPN-ICF-DOT11-APMT-MIB::hpnicfDot11APTxStatisEntry,,not-accessible,hpnicfDot11CurAPID:hpnicfDot11RadioID,current,,Each entry of the table will provide the statistic data for each radio of a specific AP.
.1.3.6.1.4.1.11.2.14.11.15.2.75.2.2.2.1.1,HPN-ICF-DOT11-APMT-MIB::hpnicfDot11TxFragCnt,Counter32,read-only,,current,,Represents the number of fragmented frames transmission.
.1.3.6.1.4.1.11.2.14.11.15.2.75.2.2.2.1.2,HPN-ICF-DOT11-APMT-MIB::hpnicfDot11FailedCnt,Counter32,read-only,,current,,Represents the number of transmission failures.
.1.3.6.1.4.1.11.2.14.11.15.2.75.2.2.2.1.3,HPN-ICF-DOT11-APMT-MIB::hpnicfDot11RetryCnt,Counter32,read-only,,current,,Represents the number of transmit retries.
.1.3.6.1.4.1.11.2.14.11.15.2.75.2.2.2.1.4,HPN-ICF-DOT11-APMT-MIB::hpnicfDot11MultiRetryCnt,Counter32,read-only,,current,,Represents the number of transmits that required more than one retry.
.1.3.6.1.4.1.11.2.14.11.15.2.75.2.2.2.1.5,HPN-ICF-DOT11-APMT-MIB::hpnicfDot11RtsSuccessCnt,Counter32,read-only,,current,,Represents the number of successful RTS (Request to send) transmission.
.1.3.6.1.4.1.11.2.14.11.15.2.75.2.2.2.1.6,HPN-ICF-DOT11-APMT-MIB::hpnicfDot11RtsFailCnt,Counter32,read-only,,current,,Represents the number of RTS transmission failures.
.1.3.6.1.4.1.11.2.14.11.15.2.75.2.2.2.1.7,HPN-ICF-DOT11-APMT-MIB::hpnicfDot11AckFailCnt,Counter32,read-only,,current,,Represents the number of acknowledgement failures.
.1.3.6.1.4.1.11.2.14.11.15.2.75.2.2.2.1.8,HPN-ICF-DOT11-APMT-MIB::hpnicfDot11TxFrameCnt,Counter32,read-only,,current,,Represents the total number of frames transmission.
.1.3.6.1.4.1.11.2.14.11.15.2.75.2.2.2.1.9,HPN-ICF-DOT11-APMT-MIB::hpnicfDot11TxUcastFrameCnt,Counter32,read-only,,current,,Represents the number of unicast frames transmission.
.1.3.6.1.4.1.11.2.14.11.15.2.75.2.2.2.1.10,HPN-ICF-DOT11-APMT-MIB::hpnicfDot11TxBcastFrameCnt,Counter32,read-only,,current,,Represents the number of broadcast frames transmission.
.1.3.6.1.4.1.11.2.14.11.15.2.75.2.2.2.1.11,HPN-ICF-DOT11-APMT-MIB::hpnicfDot11TxMcastFrameCnt,Counter32,read-only,,current,,Represents the number of multicast frames transmission.
.1.3.6.1.4.1.11.2.14.11.15.2.75.2.2.2.1.12,HPN-ICF-DOT11-APMT-MIB::hpnicfDot11TxDiscardFrameCnt,Counter32,read-only,,current,,Represents the number of frames discarded by AP.
.1.3.6.1.4.1.11.2.14.11.15.2.75.2.2.2.1.13,HPN-ICF-DOT11-APMT-MIB::hpnicfDot11TxFrameBytes,Counter32,read-only,,current,,Represents the total bytes of frames transmission.
.1.3.6.1.4.1.11.2.14.11.15.2.75.2.2.2.1.14,HPN-ICF-DOT11-APMT-MIB::hpnicfDot11TxUcastFrameBytes,Counter32,read-only,,current,,Represents the bytes of unicast frames transmission.
.1.3.6.1.4.1.11.2.14.11.15.2.75.2.2.2.1.15,HPN-ICF-DOT11-APMT-MIB::hpnicfDot11TxBcastFrameBytes,Counter32,read-only,,current,,Represents the bytes of broadcast frames transmission.
.1.3.6.1.4.1.11.2.14.11.15.2.75.2.2.2.1.16,HPN-ICF-DOT11-APMT-MIB::hpnicfDot11TxMcastFrameBytes,Counter32,read-only,,current,,Represents the bytes of multicast frames transmission.
.1.3.6.1.4.1.11.2.14.11.15.2.75.2.2.2.1.17,HPN-ICF-DOT11-APMT-MIB::hpnicfDot11TxDiscardFrameBytes,Counter32,read-only,,current,,Represents the bytes of multicast frames transmission.
.1.3.6.1.4.1.11.2.14.11.15.2.75.2.2.2.1.18,HPN-ICF-DOT11-APMT-MIB::hpnicfDot11TxAuthenFrameCnt,Counter32,read-only,,current,,Represents the number of authentication frame transmission.
.1.3.6.1.4.1.11.2.14.11.15.2.75.2.2.2.1.19,HPN-ICF-DOT11-APMT-MIB::hpnicfDot11TxAssociateFrameCnt,Counter32,read-only,,current,,Represents the number of associate frame transmission.
.1.3.6.1.4.1.11.2.14.11.15.2.75.2.2.2.1.20,HPN-ICF-DOT11-APMT-MIB::hpnicfDot11TxFrameRetryRatio,Integer32,read-only,,current,,Represents the ratio of retry frame.
.1.3.6.1.4.1.11.2.14.11.15.2.75.2.2.2.1.21,HPN-ICF-DOT11-APMT-MIB::hpnicfDot11TxDataFrameCnt,Counter32,read-only,,current,,Represents the number of data frame transmission.
.1.3.6.1.4.1.11.2.14.11.15.2.75.2.2.2.1.22,HPN-ICF-DOT11-APMT-MIB::hpnicfDot11TxDataFrameBytes,Counter32,read-only,,current,,Represents the bytes of data frame transmission.
.1.3.6.1.4.1.11.2.14.11.15.2.75.2.2.2.1.23,HPN-ICF-DOT11-APMT-MIB::hpnicfDot11TxMSDUCnt,Counter32,read-only,,current,,Represents the total number of MSDU transmission.
.1.3.6.1.4.1.11.2.14.11.15.2.75.2.2.2.1.24,HPN-ICF-DOT11-APMT-MIB::hpnicfDot11TxDiscardMSDUCnt,Counter32,read-only,,current,,Represents the number of discarded MSDU transmission.
.1.3.6.1.4.1.11.2.14.11.15.2.75.2.2.2.1.25,HPN-ICF-DOT11-APMT-MIB::hpnicfDot11RetryMSDUCnt,Counter32,read-only,,current,,Represents the number of retransfer MSDU.
.1.3.6.1.4.1.11.2.14.11.15.2.75.2.2.2.1.26,HPN-ICF-DOT11-APMT-MIB::hpnicfDot11TxPayloadBytes,Counter32,read-only,,current,,Represents the payload bytes of data frames transmission.
.1.3.6.1.4.1.11.2.14.11.15.2.75.2.2.2.1.27,HPN-ICF-DOT11-APMT-MIB::hpnicfDot11TxTrafficSpeed,Integer32,read-only,,current,,Represents the bytes of frames transmission per second.
.1.3.6.1.4.1.11.2.14.11.15.2.75.2.2.2.1.28,HPN-ICF-DOT11-APMT-MIB::hpnicfDot11TxErrFrameRatio,Integer32,read-only,,current,,Represents the ratio of error frame.
.1.3.6.1.4.1.11.2.14.11.15.2.75.2.2.2.1.29,HPN-ICF-DOT11-APMT-MIB::hpnicfDot11TxFrameRate,Integer32,read-only,,current,,Represents the count of frames transmission per second.
.1.3.6.1.4.1.11.2.14.11.15.2.75.2.2.2.1.30,HPN-ICF-DOT11-APMT-MIB::hpnicfDot11TxMgtFrameCnt,Counter32,read-only,,current,,Represents the number of transmitted management frames.
.1.3.6.1.4.1.11.2.14.11.15.2.75.2.2.2.1.31,HPN-ICF-DOT11-APMT-MIB::hpnicfDot11TxCtrlFrameCnt,Counter32,read-only,,current,,Represents the number of transmission control frames.
.1.3.6.1.4.1.11.2.14.11.15.2.75.2.2.2.1.32,HPN-ICF-DOT11-APMT-MIB::hpnicfDot11TxMACErrCnt,Counter32,read-only,,current,,Represents the count of MAC error frame.
.1.3.6.1.4.1.11.2.14.11.15.2.75.2.2.2.1.33,HPN-ICF-DOT11-APMT-MIB::hpnicfDot11TxErrFrameCnt,Counter32,read-only,,current,,Represents the count of error frame.
.1.3.6.1.4.1.11.2.14.11.15.2.75.2.2.2.1.34,HPN-ICF-DOT11-APMT-MIB::hpnicfDot11TxUcastDataFrameCnt,Counter64,read-only,,current,,Represents the number of unicast data frames transmission.
.1.3.6.1.4.1.11.2.14.11.15.2.75.2.2.2.1.35,HPN-ICF-DOT11-APMT-MIB::hpnicfDot11TxNUcastDataFrameCnt,Counter64,read-only,,current,,Represents the number of non-unicast data frames transmission.
.1.3.6.1.4.1.11.2.14.11.15.2.75.2.2.3,HPN-ICF-DOT11-APMT-MIB::hpnicfDot11APAssocStatisTable,,not-accessible,,current,,The table will provide the station association statistic for AP.
.1.3.6.1.4.1.11.2.14.11.15.2.75.2.2.3.1,HPN-ICF-DOT11-APMT-MIB::hpnicfDot11APAssocStatisEntry,,not-accessible,hpnicfDot11CurAPID,current,,Each entry of the table will provide the statistic data of station association for AP.
.1.3.6.1.4.1.11.2.14.11.15.2.75.2.2.3.1.1,HPN-ICF-DOT11-APMT-MIB::hpnicfDot11ApStationAssocSum,Counter32,read-only,,current,,Represents the total number of station association with this AP.
.1.3.6.1.4.1.11.2.14.11.15.2.75.2.2.3.1.2,HPN-ICF-DOT11-APMT-MIB::hpnicfDot11ApStationAssocFailSum,Counter32,read-only,,current,,Represents the total number of station association failure with this AP.
.1.3.6.1.4.1.11.2.14.11.15.2.75.2.2.3.1.3,HPN-ICF-DOT11-APMT-MIB::hpnicfDot11ApStationReassocSum,Counter32,read-only,,current,,Represents the total number of station reassociation with this AP.
.1.3.6.1.4.1.11.2.14.11.15.2.75.2.2.3.1.4,HPN-ICF-DOT11-APMT-MIB::hpnicfDot11ApStationAssocRejectSum,Counter32,read-only,,current,,Represents the total number of station association rejected on account of resource limit with this AP.
.1.3.6.1.4.1.11.2.14.11.15.2.75.2.2.3.1.5,HPN-ICF-DOT11-APMT-MIB::hpnicfDot11ApStationExDeAuthenSum,Counter32,read-only,,current,,Represents the total number of exceptional station deauthentication (Without sending a deauthentication to AP) with this AP.
.1.3.6.1.4.1.11.2.14.11.15.2.75.2.2.3.1.6,HPN-ICF-DOT11-APMT-MIB::hpnicfDot11ApStationCurAssocSum,Integer32,read-only,,current,,Represents the total number of current associated stations with this AP.
.1.3.6.1.4.1.11.2.14.11.15.2.75.2.2.3.1.7,HPN-ICF-DOT11-APMT-MIB::hpnicfDot11ApStaCurAuthSuccSum,Integer32,read-only,,current,,Represents the successful number of station authentication with this AP.
.1.3.6.1.4.1.11.2.14.11.15.2.75.2.2.3.1.8,HPN-ICF-DOT11-APMT-MIB::hpnicfDot11AllStationUpSumTime,Counter32,read-only,,current,,Represents the sum of duration of all stations which associate with this AP.
.1.3.6.1.4.1.11.2.14.11.15.2.75.2.2.3.1.9,HPN-ICF-DOT11-APMT-MIB::hpnicfDot11ApStationAssocReqSum,Counter32,read-only,,current,,Represents the number of station association request with this AP.
.1.3.6.1.4.1.11.2.14.11.15.2.75.2.2.3.1.10,HPN-ICF-DOT11-APMT-MIB::hpnicfDot11AllStationUpSumTimeTicks,TimeTicks,read-only,,current,,Represents the sum of duration of all stations which associate with this AP.
.1.3.6.1.4.1.11.2.14.11.15.2.75.2.2.3.1.11,HPN-ICF-DOT11-APMT-MIB::hpnicfDot11ApStationReassocReqSum,Counter32,read-only,,current,,Represents the total number of station reassociation request with this AP.
.1.3.6.1.4.1.11.2.14.11.15.2.75.2.2.3.1.12,HPN-ICF-DOT11-APMT-MIB::hpnicfDot11ApStationReassocFailSum,Counter32,read-only,,current,,Represents the total number of station reassociation failure with this AP.
.1.3.6.1.4.1.11.2.14.11.15.2.75.2.2.4,HPN-ICF-DOT11-APMT-MIB::hpnicfDot11BSSRxStatisTable,,not-accessible,,current,,The table will provide the reception statistic for a specific BSS on a radio.
.1.3.6.1.4.1.11.2.14.11.15.2.75.2.2.4.1,HPN-ICF-DOT11-APMT-MIB::hpnicfDot11BSSRxStatisEntry,,not-accessible,hpnicfDot11CurAPID:hpnicfDot11RadioID:hpnicfDot11WlanID,current,,Each entry of the table will provide the statistic data for each BSS on a specific radio.
.1.3.6.1.4.1.11.2.14.11.15.2.75.2.2.4.1.1,HPN-ICF-DOT11-APMT-MIB::hpnicfDot11BSSRxFrameCnt,Counter32,read-only,,current,,Represents the number of frames reception with this BSS.
.1.3.6.1.4.1.11.2.14.11.15.2.75.2.2.4.1.2,HPN-ICF-DOT11-APMT-MIB::hpnicfDot11BSSRxFrameBytes,Counter32,read-only,,current,,Represents the bytes of frames reception with this BSS.
.1.3.6.1.4.1.11.2.14.11.15.2.75.2.2.4.1.3,HPN-ICF-DOT11-APMT-MIB::hpnicfDot11BSSRxDataFrameCnt,Counter32,read-only,,current,,Represents the number of data frames reception with this BSS.
.1.3.6.1.4.1.11.2.14.11.15.2.75.2.2.4.1.4,HPN-ICF-DOT11-APMT-MIB::hpnicfDot11BSSRxDataFrameBytes,Counter32,read-only,,current,,Represents the bytes of data frames reception with this BSS.
.1.3.6.1.4.1.11.2.14.11.15.2.75.2.2.4.1.5,HPN-ICF-DOT11-APMT-MIB::hpnicfDot11BSSRxAssociateFrameCnt,Counter32,read-only,,current,,Represents the number of associate frames reception with this BSS.
.1.3.6.1.4.1.11.2.14.11.15.2.75.2.2.4.1.6,HPN-ICF-DOT11-APMT-MIB::hpnicfDot11BSSRxFrameErrorRatio,Integer32,read-only,,current,,Represents the ratio of error frames reception with this BSS.
.1.3.6.1.4.1.11.2.14.11.15.2.75.2.2.4.1.7,HPN-ICF-DOT11-APMT-MIB::hpnicfDot11BSSRxPayloadBytes,Counter32,read-only,,current,,Represents the payload bytes of data frames reception with this BSS.
.1.3.6.1.4.1.11.2.14.11.15.2.75.2.2.4.1.8,HPN-ICF-DOT11-APMT-MIB::hpnicfDot11BSSRxUniFrameCnt,Counter32,read-only,,current,,Represents the count of unicast frames received.
.1.3.6.1.4.1.11.2.14.11.15.2.75.2.2.4.1.9,HPN-ICF-DOT11-APMT-MIB::hpnicfDot11BSSRxNonUniFrameCnt,Integer32,read-only,,current,,Represents the count of non-unicast frames received.
.1.3.6.1.4.1.11.2.14.11.15.2.75.2.2.4.1.10,HPN-ICF-DOT11-APMT-MIB::hpnicfDot11BSSRxAuthenFrameCnt,Counter32,read-only,,current,,Represents the count of authentication frames received.
.1.3.6.1.4.1.11.2.14.11.15.2.75.2.2.5,HPN-ICF-DOT11-APMT-MIB::hpnicfDot11BSSTxStatisTable,,not-accessible,,current,,The table will provide the transmission statistic for a specific BSS on a radio.
.1.3.6.1.4.1.11.2.14.11.15.2.75.2.2.5.1,HPN-ICF-DOT11-APMT-MIB::hpnicfDot11BSSTxStatisEntry,,not-accessible,hpnicfDot11CurAPID:hpnicfDot11RadioID:hpnicfDot11WlanID,current,,Each entry of the table will provide the statistic data for each BSS on a specific radio.
.1.3.6.1.4.1.11.2.14.11.15.2.75.2.2.5.1.1,HPN-ICF-DOT11-APMT-MIB::hpnicfDot11BSSTxFrameCnt,Counter32,read-only,,current,,Represents the total number of frames transmission with this BSS.
.1.3.6.1.4.1.11.2.14.11.15.2.75.2.2.5.1.2,HPN-ICF-DOT11-APMT-MIB::hpnicfDot11BSSTxFrameBytes,Counter32,read-only,,current,,Represents the total number of bytes transmission with this BSS.
.1.3.6.1.4.1.11.2.14.11.15.2.75.2.2.5.1.3,HPN-ICF-DOT11-APMT-MIB::hpnicfDot11BSSTxDataFrameCnt,Counter32,read-only,,current,,Represents the number of data frame transmission with this BSS.
.1.3.6.1.4.1.11.2.14.11.15.2.75.2.2.5.1.4,HPN-ICF-DOT11-APMT-MIB::hpnicfDot11BSSTxDataFrameBytes,Counter32,read-only,,current,,Represents the bytes of data frame transmission with this BSS.
.1.3.6.1.4.1.11.2.14.11.15.2.75.2.2.5.1.5,HPN-ICF-DOT11-APMT-MIB::hpnicfDot11BSSTxAssociateFrameCnt,Counter32,read-only,,current,,Represents the number of associate frame transmission with this BSS.
.1.3.6.1.4.1.11.2.14.11.15.2.75.2.2.5.1.6,HPN-ICF-DOT11-APMT-MIB::hpnicfDot11BSSTxPayloadBytes,Counter32,read-only,,current,,Represents the payload bytes of data frame transmission with this BSS.
.1.3.6.1.4.1.11.2.14.11.15.2.75.2.2.5.1.7,HPN-ICF-DOT11-APMT-MIB::hpnicfDot11BSSTxRetryCnt,Counter32,read-only,,current,,Represents the count of bytes retransmitted with this BSS.
.1.3.6.1.4.1.11.2.14.11.15.2.75.2.2.5.1.8,HPN-ICF-DOT11-APMT-MIB::hpnicfDot11BSSTxUniFrameCnt,Counter32,read-only,,current,,Represents the count of unicast frames transmission with this BSS.
.1.3.6.1.4.1.11.2.14.11.15.2.75.2.2.5.1.9,HPN-ICF-DOT11-APMT-MIB::hpnicfDot11BSSTxNonUniFrameCnt,Integer32,read-only,,current,,Represents the number of non-unicast frames transmission with this BSS.
.1.3.6.1.4.1.11.2.14.11.15.2.75.2.2.5.1.10,HPN-ICF-DOT11-APMT-MIB::hpnicfDot11BSSTxAuthenFrameCnt,Counter32,read-only,,current,,Represents the count of authentication frames transmission with this BSS.
.1.3.6.1.4.1.11.2.14.11.15.2.75.2.2.6,HPN-ICF-DOT11-APMT-MIB::hpnicfDot11BSSAssocStatisTable,,not-accessible,,current,,The table will provide the station association statistic for BSS.
.1.3.6.1.4.1.11.2.14.11.15.2.75.2.2.6.1,HPN-ICF-DOT11-APMT-MIB::hpnicfDot11BSSAssocStatisEntry,,not-accessible,hpnicfDot11CurAPID:hpnicfDot11RadioID:hpnicfDot11WlanID,current,,Each entry of the table will provide the statistic data of station association for BSS.
.1.3.6.1.4.1.11.2.14.11.15.2.75.2.2.6.1.1,HPN-ICF-DOT11-APMT-MIB::hpnicfDot11BSSStationAssocSum,Counter32,read-only,,current,,Represents the total number of station association with this BSS.
.1.3.6.1.4.1.11.2.14.11.15.2.75.2.2.6.1.2,HPN-ICF-DOT11-APMT-MIB::hpnicfDot11BSSStationAssocFailSum,Counter32,read-only,,current,,Represents the total number of station association failure with this BSS.
.1.3.6.1.4.1.11.2.14.11.15.2.75.2.2.6.1.3,HPN-ICF-DOT11-APMT-MIB::hpnicfDot11BSSStationReassocSum,Counter32,read-only,,current,,Represents the total number of station reassociation with this BSS.
.1.3.6.1.4.1.11.2.14.11.15.2.75.2.2.6.1.4,HPN-ICF-DOT11-APMT-MIB::hpnicfDot11BSSStationAssocRejectSum,Counter32,read-only,,current,,Represents the total number of station association rejected on account of resource limit with this BSS.
.1.3.6.1.4.1.11.2.14.11.15.2.75.2.2.6.1.5,HPN-ICF-DOT11-APMT-MIB::hpnicfDot11BSSStationExDeAssocSum,Counter32,read-only,,current,,Represents the total number of exceptional station deauthentication (Without sending a deauthentication to AP) with this BSS.
.1.3.6.1.4.1.11.2.14.11.15.2.75.2.2.6.1.6,HPN-ICF-DOT11-APMT-MIB::hpnicfDot11BSSStationCurAssocSum,Integer32,read-only,,current,,Represents the total number of current associated stations with this BSS.
.1.3.6.1.4.1.11.2.14.11.15.2.75.2.2.6.1.7,HPN-ICF-DOT11-APMT-MIB::hpnicfDot11BSSStationAssocReqSum,Counter32,read-only,,current,,Represents the total number of station association request with this BSS.
.1.3.6.1.4.1.11.2.14.11.15.2.75.2.2.6.1.8,HPN-ICF-DOT11-APMT-MIB::hpnicfDot11BSSStationCurAuthSum,Integer32,read-only,,current,,Represents the total number of current associated stations which have passed portal or 1x authentication with this BSS.
.1.3.6.1.4.1.11.2.14.11.15.2.75.2.2.7,HPN-ICF-DOT11-APMT-MIB::hpnicfDot11APLinkStatisTable,,not-accessible,,current,,The table will provide the link statistic for AP.
.1.3.6.1.4.1.11.2.14.11.15.2.75.2.2.7.1,HPN-ICF-DOT11-APMT-MIB::hpnicfDot11APLinkStatisEntry,,not-accessible,hpnicfDot11CurAPID,current,,Each entry provides the link statistic of the AP.
.1.3.6.1.4.1.11.2.14.11.15.2.75.2.2.7.1.1,HPN-ICF-DOT11-APMT-MIB::hpnicfDot11UpLinkUpDownTimes,Counter32,read-only,,current,,Represents up/down times of uplink interface of the AP.
.1.3.6.1.4.1.11.2.14.11.15.2.75.2.2.7.1.2,HPN-ICF-DOT11-APMT-MIB::hpnicfDot11DownLinkUpDownTimes,Counter32,read-only,,current,,Represents up/down times of downlink interface of the AP.
.1.3.6.1.4.1.11.2.14.11.15.2.75.2.2.8,HPN-ICF-DOT11-APMT-MIB::hpnicfDot11RadioAssocStatisTable,,not-accessible,,current,,The table will provide the station association statistic for radio.
.1.3.6.1.4.1.11.2.14.11.15.2.75.2.2.8.1,HPN-ICF-DOT11-APMT-MIB::hpnicfDot11RadioAssocStatisEntry,,not-accessible,hpnicfDot11CurAPID:hpnicfDot11RadioID,current,,Each entry of the table will provide the statistic data of station association for radio.
.1.3.6.1.4.1.11.2.14.11.15.2.75.2.2.8.1.1,HPN-ICF-DOT11-APMT-MIB::hpnicfDot11RadioStaAssocSum,Counter32,read-only,,current,,Represents the total number of station association with this radio.
.1.3.6.1.4.1.11.2.14.11.15.2.75.2.2.8.1.2,HPN-ICF-DOT11-APMT-MIB::hpnicfDot11RadioStaAssocFailSum,Counter32,read-only,,current,,Represents the total number of station association failure with this radio.
.1.3.6.1.4.1.11.2.14.11.15.2.75.2.2.8.1.3,HPN-ICF-DOT11-APMT-MIB::hpnicfDot11RadioStaReassocSum,Counter32,read-only,,current,,Represents the total number of station re-association with this radio.
.1.3.6.1.4.1.11.2.14.11.15.2.75.2.2.8.1.4,HPN-ICF-DOT11-APMT-MIB::hpnicfDot11RadioStaAssocRejectSum,Counter32,read-only,,current,,Represents the total number of station association rejected on account of resource limit with this radio.
.1.3.6.1.4.1.11.2.14.11.15.2.75.2.2.8.1.5,HPN-ICF-DOT11-APMT-MIB::hpnicfDot11RadioStaExDeAssocSum,Counter32,read-only,,current,,Represents the total number of exceptional station de-authentication (Without sending a de-authentication to AP) with this radio.
.1.3.6.1.4.1.11.2.14.11.15.2.75.2.2.8.1.6,HPN-ICF-DOT11-APMT-MIB::hpnicfDot11RadioStaCurAssocSum,Integer32,read-only,,current,,Represents the total number of current associated stations with this radio.
.1.3.6.1.4.1.11.2.14.11.15.2.75.2.2.9,HPN-ICF-DOT11-APMT-MIB::hpnicfDot11RadioMngFrameStatisTable,,not-accessible,,current,,The table will provide the management frame statistic for this radio.
.1.3.6.1.4.1.11.2.14.11.15.2.75.2.2.9.1,HPN-ICF-DOT11-APMT-MIB::hpnicfDot11RadioMngFrameStatisEntry,,not-accessible,hpnicfDot11RadioStatisIndex:hpnicfDot11MngFrameType,current,,Each entry of the table will provide the management frame statistic for this radio.
.1.3.6.1.4.1.11.2.14.11.15.2.75.2.2.9.1.1,HPN-ICF-DOT11-APMT-MIB::hpnicfDot11RadioStatisIndex,Unsigned32,not-accessible,,current,,Represents index of radio.
.1.3.6.1.4.1.11.2.14.11.15.2.75.2.2.9.1.2,HPN-ICF-DOT11-APMT-MIB::hpnicfDot11MngFrameType,INTEGER,not-accessible,,current,assocReq(1):assocResp(2):reassocReq(3):reassocResp(4):probeReq(5):probeResp(6):beacon(7):atim(8):disassociation(9):authentication(10):deauthentication(11):action(12),Represents the type of the management frame on this radio.
.1.3.6.1.4.1.11.2.14.11.15.2.75.2.2.9.1.3,HPN-ICF-DOT11-APMT-MIB::hpnicfDot11MngFrameCnt,Counter32,read-only,,current,,Represents the total number of each type for management frame on this radio.
.1.3.6.1.4.1.11.2.14.11.15.2.75.2.2.10,HPN-ICF-DOT11-APMT-MIB::hpnicfDot11APAuthFailStatisTable,,not-accessible,,current,,The table will provide the authentication failure statistic for this AP.
.1.3.6.1.4.1.11.2.14.11.15.2.75.2.2.10.1,HPN-ICF-DOT11-APMT-MIB::hpnicfDot11APAuthFailStatisEntry,,not-accessible,hpnicfDot11CurAPID:hpnicfDot11APAuthFailStatisType,current,,Each entry of the table will provide the authentication failure statistic for this AP.
.1.3.6.1.4.1.11.2.14.11.15.2.75.2.2.10.1.1,HPN-ICF-DOT11-APMT-MIB::hpnicfDot11APAuthFailStatisType,INTEGER,not-accessible,,current,invalidation(1):overtime(2):rejected(3):other(4),Represents the type of authentication failure with this AP.
.1.3.6.1.4.1.11.2.14.11.15.2.75.2.2.10.1.2,HPN-ICF-DOT11-APMT-MIB::hpnicfDot11APAuthFailStatisCnt,Counter32,read-only,,current,,Represents the total number of each type for authentication failure on this AP.
.1.3.6.1.4.1.11.2.14.11.15.2.75.2.2.11,HPN-ICF-DOT11-APMT-MIB::hpnicfDot11APAssocFailStatisTable,,not-accessible,,current,,The table will provide the association failure statistic for this AP.
.1.3.6.1.4.1.11.2.14.11.15.2.75.2.2.11.1,HPN-ICF-DOT11-APMT-MIB::hpnicfDot11APAssocFailStatisEntry,,not-accessible,hpnicfDot11CurAPID:hpnicfDot11APAssocFailStatisType,current,,Each entry of the table will provide the association failure statistic for this AP.
.1.3.6.1.4.1.11.2.14.11.15.2.75.2.2.11.1.1,HPN-ICF-DOT11-APMT-MIB::hpnicfDot11APAssocFailStatisType,INTEGER,not-accessible,,current,invalidation(1):overtime(2):rejected(3):other(4),Represents the type of association failure with this AP.
.1.3.6.1.4.1.11.2.14.11.15.2.75.2.2.11.1.2,HPN-ICF-DOT11-APMT-MIB::hpnicfDot11APAssocFailStatisCnt,Counter32,read-only,,current,,Represents the total number of each type for association failure on this AP.
.1.3.6.1.4.1.11.2.14.11.15.2.75.2.2.12,HPN-ICF-DOT11-APMT-MIB::hpnicfDot11APReassocStatisTable,,not-accessible,,current,,The table will provide the re-association statistic for this AP.
.1.3.6.1.4.1.11.2.14.11.15.2.75.2.2.12.1,HPN-ICF-DOT11-APMT-MIB::hpnicfDot11APReassocStatisEntry,,not-accessible,hpnicfDot11CurAPID:hpnicfDot11APReassocStatisType,current,,Each entry of the table will provide the re-association statistic for this AP.
.1.3.6.1.4.1.11.2.14.11.15.2.75.2.2.12.1.1,HPN-ICF-DOT11-APMT-MIB::hpnicfDot11APReassocStatisType,INTEGER,not-accessible,,current,total(1):success(2):invalidation(3):overtime(4):rejected(5):other(6),Represents the type of re-association with this AP.
.1.3.6.1.4.1.11.2.14.11.15.2.75.2.2.12.1.2,HPN-ICF-DOT11-APMT-MIB::hpnicfDot11APReassocStatisCnt,Counter32,read-only,,current,,Represents the total number of each type for re-association with this AP.
.1.3.6.1.4.1.11.2.14.11.15.2.75.2.2.13,HPN-ICF-DOT11-APMT-MIB::hpnicfDot11APUserAuthStatisTable,,not-accessible,,current,,The table will provide the user authentication statistic for this AP.
.1.3.6.1.4.1.11.2.14.11.15.2.75.2.2.13.1,HPN-ICF-DOT11-APMT-MIB::hpnicfDot11APUserAuthStatisEntry,,not-accessible,hpnicfDot11CurAPID:hpnicfDot11UserAuthStatisType,current,,Each entry of the table will provide the user authentication statistic for this AP.
.1.3.6.1.4.1.11.2.14.11.15.2.75.2.2.13.1.1,HPN-ICF-DOT11-APMT-MIB::hpnicfDot11UserAuthStatisType,INTEGER,not-accessible,,current,total(1):success(2):keyError(3):invalidation(4):overtime(5):rejected(6):other(7),Represents the type of user authentication with this AP.
.1.3.6.1.4.1.11.2.14.11.15.2.75.2.2.13.1.2,HPN-ICF-DOT11-APMT-MIB::hpnicfDot11UserAuthStatisCnt,Counter32,read-only,,current,,Represents the total number of each type for user authentication with this AP.
.1.3.6.1.4.1.11.2.14.11.15.2.75.2.2.14,HPN-ICF-DOT11-APMT-MIB::hpnicfDot11APDeauthStatisTable,,not-accessible,,current,,The table will provide the de-authentication statistic for this AP.
.1.3.6.1.4.1.11.2.14.11.15.2.75.2.2.14.1,HPN-ICF-DOT11-APMT-MIB::hpnicfDot11APDeauthStatisEntry,,not-accessible,hpnicfDot11CurAPID:hpnicfDot11APDeauthStatisType,current,,Each entry of the table will provide the de-authentication statistic for this AP.
.1.3.6.1.4.1.11.2.14.11.15.2.75.2.2.14.1.1,HPN-ICF-DOT11-APMT-MIB::hpnicfDot11APDeauthStatisType,INTEGER,not-accessible,,current,total(1):stationLeaving(2):shortResource(3):exception(4):other(5),Represents the type of de-authentication for this AP.
.1.3.6.1.4.1.11.2.14.11.15.2.75.2.2.14.1.2,HPN-ICF-DOT11-APMT-MIB::hpnicfDot11APDeauthStatisCnt,Counter32,read-only,,current,,Represents the total number of each type for de-authentication with this AP.
.1.3.6.1.4.1.11.2.14.11.15.2.75.2.2.15,HPN-ICF-DOT11-APMT-MIB::hpnicfDot11APDeassocStatisTable,,not-accessible,,current,,The table will provide the de-association statistic for this AP.
.1.3.6.1.4.1.11.2.14.11.15.2.75.2.2.15.1,HPN-ICF-DOT11-APMT-MIB::hpnicfDot11APDeassocStatisEntry,,not-accessible,hpnicfDot11CurAPID:hpnicfDot11APDeassocStatisType,current,,Each entry of the table will provide the de-association statistic for this AP.
.1.3.6.1.4.1.11.2.14.11.15.2.75.2.2.15.1.1,HPN-ICF-DOT11-APMT-MIB::hpnicfDot11APDeassocStatisType,INTEGER,not-accessible,,current,total(1):stationLeaving(2):shortResource(3):exception(4):other(5),Represents the type of de-association with this AP.
.1.3.6.1.4.1.11.2.14.11.15.2.75.2.2.15.1.2,HPN-ICF-DOT11-APMT-MIB::hpnicfDot11APDeassocStatisCnt,Counter32,read-only,,current,,Represents the total number of each type for de-association with this AP.
.1.3.6.1.4.1.11.2.14.11.15.2.75.2.2.16,HPN-ICF-DOT11-APMT-MIB::hpnicfDot11APAssocFailStatis2Table,,not-accessible,,current,,This table will provide statistic of association fails for each ap.
.1.3.6.1.4.1.11.2.14.11.15.2.75.2.2.16.1,HPN-ICF-DOT11-APMT-MIB::hpnicfDot11APAssocFailStatis2Entry,,not-accessible,hpnicfDot11CurAPID:hpnicfDot11APAssocFailStatis2Type,current,,Each entry will provide statistic of association fails for this ap.
.1.3.6.1.4.1.11.2.14.11.15.2.75.2.2.16.1.1,HPN-ICF-DOT11-APMT-MIB::hpnicfDot11APAssocFailStatis2Type,INTEGER,not-accessible,,current,shortResource(1):notSupportRateSet(2):unknownReasonCode(3):other(4),Represents the type of association fails for this AP
.1.3.6.1.4.1.11.2.14.11.15.2.75.2.2.16.1.2,HPN-ICF-DOT11-APMT-MIB::hpnicfDot11APAssocFailStatis2Cnt,Counter32,read-only,,current,,Represents the total count of association fails for this AP.
.1.3.6.1.4.1.11.2.14.11.15.2.75.2.2.17,HPN-ICF-DOT11-APMT-MIB::hpnicfDot11APIfStatisTable,,not-accessible,,current,,The table will provide the statistics on the interface of the AP.
.1.3.6.1.4.1.11.2.14.11.15.2.75.2.2.17.1,HPN-ICF-DOT11-APMT-MIB::hpnicfDot11APIfStatisEntry,,not-accessible,hpnicfDot11APElementIndex:hpnicfDot11APIfIndex,current,,Each entry of the table will provide statistics on the interface of the AP.
.1.3.6.1.4.1.11.2.14.11.15.2.75.2.2.17.1.1,HPN-ICF-DOT11-APMT-MIB::hpnicfDot11APIfInPkts,Counter32,read-only,,current,,Represents the total number of packets received on the interface.
.1.3.6.1.4.1.11.2.14.11.15.2.75.2.2.17.1.2,HPN-ICF-DOT11-APMT-MIB::hpnicfDot11APIfInNormalPkts,Counter32,read-only,,current,,Represents the total number of correct packets received on the interface.
.1.3.6.1.4.1.11.2.14.11.15.2.75.2.2.17.1.3,HPN-ICF-DOT11-APMT-MIB::hpnicfDot11APIfInErrorPkts,Counter32,read-only,,current,,Represents the total number of error packets received on the interface.
.1.3.6.1.4.1.11.2.14.11.15.2.75.2.2.17.1.4,HPN-ICF-DOT11-APMT-MIB::hpnicfDot11APIfOutPkts,Counter32,read-only,,current,,Represents the total number of packets sent from the interface.
.1.3.6.1.4.1.11.2.14.11.15.2.75.2.2.17.1.5,HPN-ICF-DOT11-APMT-MIB::hpnicfDot11APIfInOctets,Counter32,read-only,,current,,Represents the total number of octets received on the interface.
.1.3.6.1.4.1.11.2.14.11.15.2.75.2.2.17.1.6,HPN-ICF-DOT11-APMT-MIB::hpnicfDot11APIfOutOctets,Counter32,read-only,,current,,Represents the total number of octets sent from the interface.
.1.3.6.1.4.1.11.2.14.11.15.2.75.2.2.17.1.7,HPN-ICF-DOT11-APMT-MIB::hpnicfDot11APIfFlowOut,Unsigned32,read-only,,current,,Represents the traffic rate (byte/s) on the uplink interface during a sampling period.
.1.3.6.1.4.1.11.2.14.11.15.2.75.2.2.17.1.8,HPN-ICF-DOT11-APMT-MIB::hpnicfDot11APIfFlowIN,Unsigned32,read-only,,current,,Represents the traffic rate (byte/s) on the downlink interface during a sampling period.
.1.3.6.1.4.1.11.2.14.11.15.2.75.2.2.17.1.9,HPN-ICF-DOT11-APMT-MIB::hpnicfDot11APIfInUcastPkts,Counter32,read-only,,current,,Represents the number of unicast packets received on the interface.
.1.3.6.1.4.1.11.2.14.11.15.2.75.2.2.17.1.10,HPN-ICF-DOT11-APMT-MIB::hpnicfDot11APIfInNUcastPkts,Counter32,read-only,,current,,Represents the number of non-unicast packets received on the wired interface.
.1.3.6.1.4.1.11.2.14.11.15.2.75.2.2.17.1.11,HPN-ICF-DOT11-APMT-MIB::hpnicfDot11APIfInDiscardPkts,Counter32,read-only,,current,,Represents the number of unicast packets discarded on the interface.
.1.3.6.1.4.1.11.2.14.11.15.2.75.2.2.17.1.12,HPN-ICF-DOT11-APMT-MIB::hpnicfDot11APIfOutUcastPkts,Counter32,read-only,,current,,Represents the number of unicast packets send on the interface.
.1.3.6.1.4.1.11.2.14.11.15.2.75.2.2.17.1.13,HPN-ICF-DOT11-APMT-MIB::hpnicfDot11APIfOutNUcastPkts,Counter32,read-only,,current,,Represents the number of non-unicast packets send on the interface.
.1.3.6.1.4.1.11.2.14.11.15.2.75.2.2.17.1.14,HPN-ICF-DOT11-APMT-MIB::hpnicfDot11APIfOutDiscardPkts,Counter32,read-only,,current,,Represents the number of discarded packets send on the interface.
.1.3.6.1.4.1.11.2.14.11.15.2.75.2.2.17.1.15,HPN-ICF-DOT11-APMT-MIB::hpnicfDot11APIfOutErrorPkts,Counter32,read-only,,current,,Represents the number of error packets send on the interface.
.1.3.6.1.4.1.11.2.14.11.15.2.75.2.2.17.1.16,HPN-ICF-DOT11-APMT-MIB::hpnicfDot11APIfUpdownTimes,Counter32,read-only,,current,,Represents the up/down times on the interface.
.1.3.6.1.4.1.11.2.14.11.15.2.75.2.2.17.1.17,HPN-ICF-DOT11-APMT-MIB::hpnicfDot11APIfStatusKeepTime,TimeTicks,read-only,,current,,Represents the last change time on the interface.
.1.3.6.1.4.1.11.2.14.11.15.2.75.2.2.17.1.18,HPN-ICF-DOT11-APMT-MIB::hpnicfDot11APIfOperStatus,INTEGER,read-only,,current,up(1):down(2):testing(3):unknown(4):dormant(5):notPresent(6):lowerLayerDown(7),Represents the operational state of the interface.
.1.3.6.1.4.1.11.2.14.11.15.2.75.2.2.17.1.19,HPN-ICF-DOT11-APMT-MIB::hpnicfDot11APIfInBrdcastPkts,Counter64,read-only,,current,,Represents the number of broadcast packets received on the interface.
.1.3.6.1.4.1.11.2.14.11.15.2.75.2.2.17.1.20,HPN-ICF-DOT11-APMT-MIB::hpnicfDot11APIfOutBrdcastPkts,Counter64,read-only,,current,,Represents the number of broadcast packets sent on the interface.
.1.3.6.1.4.1.11.2.14.11.15.2.75.2.2.17.1.21,HPN-ICF-DOT11-APMT-MIB::hpnicfDot11APIfInMulcastPkts,Counter64,read-only,,current,,Represents the number of multicast packets received on the interface.
.1.3.6.1.4.1.11.2.14.11.15.2.75.2.2.17.1.22,HPN-ICF-DOT11-APMT-MIB::hpnicfDot11APIfOutMulcastPkts,Counter64,read-only,,current,,Represents the number of multicast packets sent on the interface.
.1.3.6.1.4.1.11.2.14.11.15.2.75.2.2.17.1.23,HPN-ICF-DOT11-APMT-MIB::hpnicfDot11APIfInPayloadOctets,Counter64,read-only,,current,,Represents the number of actual octets received on the interface.
.1.3.6.1.4.1.11.2.14.11.15.2.75.2.2.17.1.24,HPN-ICF-DOT11-APMT-MIB::hpnicfDot11APIfOutPayloadOctets,Counter64,read-only,,current,,Represents the number of actual octets sent on the interface.
.1.3.6.1.4.1.11.2.14.11.15.2.75.2.2.18,HPN-ICF-DOT11-APMT-MIB::hpnicfDot11RadioMngFrmStatisTable,,not-accessible,,current,,The table will provide the management frame statistic of this radio.
.1.3.6.1.4.1.11.2.14.11.15.2.75.2.2.18.1,HPN-ICF-DOT11-APMT-MIB::hpnicfDot11RadioMngFrmStatisEntry,,not-accessible,hpnicfDot11CurAPID:hpnicfDot11RadioID:hpnicfDot11MngFrmType,current,,Each entry of the table will provide the management frame statistic of this radio.
.1.3.6.1.4.1.11.2.14.11.15.2.75.2.2.18.1.1,HPN-ICF-DOT11-APMT-MIB::hpnicfDot11MngFrmType,INTEGER,not-accessible,,current,assocReq(1):assocResp(2):reassocReq(3):reassocResp(4):probeReq(5):probeResp(6):beacon(7):atim(8):disassociation(9):authentication(10):deauthentication(11):action(12),Represents the type of the management frame on this radio.
.1.3.6.1.4.1.11.2.14.11.15.2.75.2.2.18.1.2,HPN-ICF-DOT11-APMT-MIB::hpnicfDot11MngFrmCnt,Counter32,read-only,,current,,Represents the total number of each type of management frame on this radio.
.1.3.6.1.4.1.11.2.14.11.15.2.75.2.2.19,HPN-ICF-DOT11-APMT-MIB::hpnicfDot11APPacketSizeStatisTable,,not-accessible,,current,,This table provides packets statistic base on size.
.1.3.6.1.4.1.11.2.14.11.15.2.75.2.2.19.1,HPN-ICF-DOT11-APMT-MIB::hpnicfDot11APPacketSizeStatisEntry,,not-accessible,hpnicfDot11CurAPID:hpnicfDot11RadioID:hpnicfDot11APPacketSize,current,,Each entry provides packets statistic base on size for each radio of a specific AP.
.1.3.6.1.4.1.11.2.14.11.15.2.75.2.2.19.1.1,HPN-ICF-DOT11-APMT-MIB::hpnicfDot11APPacketSize,INTEGER,not-accessible,,current,sizeLevel1(1):sizeLevel2(2):sizeLevel3(3):sizeLevel4(4),This node represents packet size: sizeLevel1 : size <= 128 sizeLevel2 : 128 < size <= 512 sizeLevel3 : 512 < size <= 1024 sizeLevel4 : size > 1024
.1.3.6.1.4.1.11.2.14.11.15.2.75.2.2.19.1.2,HPN-ICF-DOT11-APMT-MIB::hpnicfDot11APRXPacketSizeCount,Counter64,read-only,,current,,Represents the count of packets reception base on frame size.
.1.3.6.1.4.1.11.2.14.11.15.2.75.2.2.19.1.3,HPN-ICF-DOT11-APMT-MIB::hpnicfDot11APTXPacketSizeCount,Counter64,read-only,,current,,Represents the count of packets transmission base on frame size.
.1.3.6.1.4.1.11.2.14.11.15.2.75.2.2.20,HPN-ICF-DOT11-APMT-MIB::hpnicfDot11APPacketRateStatisTable,,not-accessible,,current,,This table provides packets statistic base on rate.
.1.3.6.1.4.1.11.2.14.11.15.2.75.2.2.20.1,HPN-ICF-DOT11-APMT-MIB::hpnicfDot11APPacketRateStatisEntry,,not-accessible,hpnicfDot11CurAPID:hpnicfDot11RadioID:hpnicfDot11APPacketRate,current,,Each entry provides packets statistic base on rate for each radio of a specific AP.
.1.3.6.1.4.1.11.2.14.11.15.2.75.2.2.20.1.1,HPN-ICF-DOT11-APMT-MIB::hpnicfDot11APPacketRate,Integer32,not-accessible,,current,,Represents transmit data rate(twice as actual rate).
.1.3.6.1.4.1.11.2.14.11.15.2.75.2.2.20.1.2,HPN-ICF-DOT11-APMT-MIB::hpnicfDot11APRXPacketRateCount,Counter64,read-only,,current,,Represents the count of packets reception base on transmit data rate.
.1.3.6.1.4.1.11.2.14.11.15.2.75.2.2.20.1.3,HPN-ICF-DOT11-APMT-MIB::hpnicfDot11APTXPacketRateCount,Counter64,read-only,,current,,Represents the count of packets transmission base on transmit data rate.
.1.3.6.1.4.1.11.2.14.11.15.2.75.2.2.21,HPN-ICF-DOT11-APMT-MIB::hpnicfDot11APPacketMCSRateStatisTable,,not-accessible,,current,,This table provides packets statistic base on MCS rate.
.1.3.6.1.4.1.11.2.14.11.15.2.75.2.2.21.1,HPN-ICF-DOT11-APMT-MIB::hpnicfDot11APPacketMCSRateStatisEntry,,not-accessible,hpnicfDot11CurAPID:hpnicfDot11RadioID:hpnicfDot11APPacketMCSRate,current,,Each entry provides packets statistic base on MCS rate for each radio of a specific AP.
.1.3.6.1.4.1.11.2.14.11.15.2.75.2.2.21.1.1,HPN-ICF-DOT11-APMT-MIB::hpnicfDot11APPacketMCSRate,Integer32,not-accessible,,current,,Represents transmit data rate(twice as actual rate).
.1.3.6.1.4.1.11.2.14.11.15.2.75.2.2.21.1.2,HPN-ICF-DOT11-APMT-MIB::hpnicfDot11APRXPacketMCSRateCount,Counter64,read-only,,current,,Represents the count of packets reception base on transmit data rate.
.1.3.6.1.4.1.11.2.14.11.15.2.75.2.2.21.1.3,HPN-ICF-DOT11-APMT-MIB::hpnicfDot11APTXPacketMCSRateCount,Counter64,read-only,,current,,Represents the count of packets transmission base on transmit data rate.
.1.3.6.1.4.1.11.2.14.11.15.2.75.2.2.22,HPN-ICF-DOT11-APMT-MIB::hpnicfDot11APAssocFailStatis3Table,,not-accessible,,current,,This table will provide statistic of association fails for each AP.
.1.3.6.1.4.1.11.2.14.11.15.2.75.2.2.22.1,HPN-ICF-DOT11-APMT-MIB::hpnicfDot11APAssocFailStatis3Entry,,not-accessible,hpnicfDot11CurAPID,current,,Each entry will provide statistic of association failure with this AP because of different reasons.
.1.3.6.1.4.1.11.2.14.11.15.2.75.2.2.22.1.1,HPN-ICF-DOT11-APMT-MIB::hpnicfDot11APAssocFailStatis3SRCnt,Counter32,read-only,,current,,This object represents the count of association failure because of lack of resource.
.1.3.6.1.4.1.11.2.14.11.15.2.75.2.2.22.1.2,HPN-ICF-DOT11-APMT-MIB::hpnicfDot11APAssocFailStatis3NSRCnt,Counter32,read-only,,current,,This object represents the count of association failure because of not support rate set.
.1.3.6.1.4.1.11.2.14.11.15.2.75.2.2.22.1.3,HPN-ICF-DOT11-APMT-MIB::hpnicfDot11APAssocFailStatis3URCCnt,Counter32,read-only,,current,,This object represents the count of association failure because of unknown reason code.
.1.3.6.1.4.1.11.2.14.11.15.2.75.2.2.22.1.4,HPN-ICF-DOT11-APMT-MIB::hpnicfDot11APAssocFailStatis3RFCnt,Counter32,read-only,,current,,This object represents the count of association failure because of re-associate failed.
.1.3.6.1.4.1.11.2.14.11.15.2.75.2.2.22.1.5,HPN-ICF-DOT11-APMT-MIB::hpnicfDot11APAssocFailStatis3OtherCnt,Counter32,read-only,,current,,This object represents the count of association fails because of reason not in 802.11 the protocol.
.1.3.6.1.4.1.11.2.14.11.15.2.75.2.2.22.1.6,HPN-ICF-DOT11-APMT-MIB::hpnicfDot11APAssocFailStatisRSSILowCntCM,Counter32,read-only,,current,,Represents the count of failed associations due to low RSSI.
.1.3.6.1.4.1.11.2.14.11.15.2.75.2.2.23,HPN-ICF-DOT11-APMT-MIB::hpnicfDot11APIfStatisByAPIDTable,,not-accessible,,current,,The table will provide the statistics on the interface of the AP.
.1.3.6.1.4.1.11.2.14.11.15.2.75.2.2.23.1,HPN-ICF-DOT11-APMT-MIB::hpnicfDot11APIfStatisByAPIDEntry,,not-accessible,hpnicfDot11CurAPID:hpnicfDot11APIfIndex,current,,Each entry of the table will provide statistics on the interface of the AP.
.1.3.6.1.4.1.11.2.14.11.15.2.75.2.2.23.1.1,HPN-ICF-DOT11-APMT-MIB::hpnicfDot11APIfInPkts2,Counter64,read-only,,current,,Represents the total number of packets received on the interface.
.1.3.6.1.4.1.11.2.14.11.15.2.75.2.2.23.1.2,HPN-ICF-DOT11-APMT-MIB::hpnicfDot11APIfInNormalPkts2,Counter64,read-only,,current,,Represents the total number of correct packets received on the interface.
.1.3.6.1.4.1.11.2.14.11.15.2.75.2.2.23.1.3,HPN-ICF-DOT11-APMT-MIB::hpnicfDot11APIfInErrorPkts2,Counter64,read-only,,current,,Represents the total number of error packets received on the interface.
.1.3.6.1.4.1.11.2.14.11.15.2.75.2.2.23.1.4,HPN-ICF-DOT11-APMT-MIB::hpnicfDot11APIfOutPkts2,Counter64,read-only,,current,,Represents the total number of packets sent from the interface.
.1.3.6.1.4.1.11.2.14.11.15.2.75.2.2.23.1.5,HPN-ICF-DOT11-APMT-MIB::hpnicfDot11APIfInOctets2,Counter64,read-only,,current,,Represents the total number of octets received on the interface.
.1.3.6.1.4.1.11.2.14.11.15.2.75.2.2.23.1.6,HPN-ICF-DOT11-APMT-MIB::hpnicfDot11APIfOutOctets2,Counter64,read-only,,current,,Represents the total number of octets sent from the interface.
.1.3.6.1.4.1.11.2.14.11.15.2.75.2.2.23.1.7,HPN-ICF-DOT11-APMT-MIB::hpnicfDot11APIfFlowOut2,Unsigned32,read-only,,current,,Represents the traffic rate (byte/s) on the uplink interface during a sampling period.
.1.3.6.1.4.1.11.2.14.11.15.2.75.2.2.23.1.8,HPN-ICF-DOT11-APMT-MIB::hpnicfDot11APIfFlowIN2,Unsigned32,read-only,,current,,Represents the traffic rate (byte/s) on the downlink interface during a sampling period.
.1.3.6.1.4.1.11.2.14.11.15.2.75.2.2.23.1.9,HPN-ICF-DOT11-APMT-MIB::hpnicfDot11APIfInUcastPkts2,Counter64,read-only,,current,,Represents the number of unicast packets received on the interface.
.1.3.6.1.4.1.11.2.14.11.15.2.75.2.2.23.1.10,HPN-ICF-DOT11-APMT-MIB::hpnicfDot11APIfInNUcastPkts2,Counter64,read-only,,current,,Represents the number of non-unicast packets received on the wired interface.
.1.3.6.1.4.1.11.2.14.11.15.2.75.2.2.23.1.11,HPN-ICF-DOT11-APMT-MIB::hpnicfDot11APIfInDiscardPkts2,Counter64,read-only,,current,,Represents the number of unicast packets discarded on the interface.
.1.3.6.1.4.1.11.2.14.11.15.2.75.2.2.23.1.12,HPN-ICF-DOT11-APMT-MIB::hpnicfDot11APIfOutUcastPkts2,Counter64,read-only,,current,,Represents the number of unicast packets send on the interface.
.1.3.6.1.4.1.11.2.14.11.15.2.75.2.2.23.1.13,HPN-ICF-DOT11-APMT-MIB::hpnicfDot11APIfOutNUcastPkts2,Counter64,read-only,,current,,Represents the number of non-unicast packets send on the interface.
.1.3.6.1.4.1.11.2.14.11.15.2.75.2.2.23.1.14,HPN-ICF-DOT11-APMT-MIB::hpnicfDot11APIfOutDiscardPkts2,Counter64,read-only,,current,,Represents the number of discarded packets send on the interface.
.1.3.6.1.4.1.11.2.14.11.15.2.75.2.2.23.1.15,HPN-ICF-DOT11-APMT-MIB::hpnicfDot11APIfOutErrorPkts2,Counter64,read-only,,current,,Represents the number of error packets send on the interface.
.1.3.6.1.4.1.11.2.14.11.15.2.75.2.2.23.1.16,HPN-ICF-DOT11-APMT-MIB::hpnicfDot11APIfUpdownTimes2,Counter32,read-only,,current,,Represents the up/down times on the interface.
.1.3.6.1.4.1.11.2.14.11.15.2.75.2.2.23.1.17,HPN-ICF-DOT11-APMT-MIB::hpnicfDot11APIfStatusKeepTime2,TimeTicks,read-only,,current,,Represents the last change time on the interface.
.1.3.6.1.4.1.11.2.14.11.15.2.75.2.2.23.1.18,HPN-ICF-DOT11-APMT-MIB::hpnicfDot11APIfOperStatus2,INTEGER,read-only,,current,up(1):down(2):testing(3):unknown(4):dormant(5):notPresent(6):lowerLayerDown(7),Represents the operational state of the interface.
.1.3.6.1.4.1.11.2.14.11.15.2.75.2.2.23.1.19,HPN-ICF-DOT11-APMT-MIB::hpnicfDot11APIfInBrdcastPkts2,Counter64,read-only,,current,,Represents the number of broadcast packets received on the interface.
.1.3.6.1.4.1.11.2.14.11.15.2.75.2.2.23.1.20,HPN-ICF-DOT11-APMT-MIB::hpnicfDot11APIfOutBrdcastPkts2,Counter64,read-only,,current,,Represents the number of broadcast packets sent on the interface.
.1.3.6.1.4.1.11.2.14.11.15.2.75.2.2.23.1.21,HPN-ICF-DOT11-APMT-MIB::hpnicfDot11APIfInMulcastPkts2,Counter64,read-only,,current,,Represents the number of multicast packets received on the interface.
.1.3.6.1.4.1.11.2.14.11.15.2.75.2.2.23.1.22,HPN-ICF-DOT11-APMT-MIB::hpnicfDot11APIfOutMulcastPkts2,Counter64,read-only,,current,,Represents the number of multicast packets sent on the interface.
.1.3.6.1.4.1.11.2.14.11.15.2.75.2.2.23.1.23,HPN-ICF-DOT11-APMT-MIB::hpnicfDot11APIfInPayloadOctets2,Counter64,read-only,,current,,Represents the number of actual octets received on the interface.
.1.3.6.1.4.1.11.2.14.11.15.2.75.2.2.23.1.24,HPN-ICF-DOT11-APMT-MIB::hpnicfDot11APIfOutPayloadOctets2,Counter64,read-only,,current,,Represents the number of actual octets sent on the interface.
.1.3.6.1.4.1.11.2.14.11.15.2.75.2.2.23.1.25,HPN-ICF-DOT11-APMT-MIB::hpnicfDot11APIfInDataOctets2,Counter64,read-only,,current,,Represents the number of actual data octets received on the interface.
.1.3.6.1.4.1.11.2.14.11.15.2.75.2.2.23.1.26,HPN-ICF-DOT11-APMT-MIB::hpnicfDot11APIfOutDataOctets2,Counter64,read-only,,current,,Represents the number of actual data octets sent on the interface.
.1.3.6.1.4.1.11.2.14.11.15.2.75.2.2.23.1.27,HPN-ICF-DOT11-APMT-MIB::hpnicfDot11APIfAdminStatus,INTEGER,read-write,,current,up(1):down(2):testing(3),Expected state of the interface. In testing state the interface does not forward any operational packets. When a managed system is initialized, all interfaces start with hpnicfDot11APIfAdminStatus in the down state. As a result of either explicit management action or per configuration information retained by the managed system, hpnicfDot11APIfAdminStatus is then changed to either the up or testing state or remains in the down state.
.1.3.6.1.4.1.11.2.14.11.15.2.75.2.2.23.1.28,HPN-ICF-DOT11-APMT-MIB::hpnicfDot11APIfOperStatusCM,INTEGER,read-only,,current,up(1):down(2):testing(3):admindown(4),Operational status of the interface.
.1.3.6.1.4.1.11.2.14.11.15.2.75.2.2.24,HPN-ICF-DOT11-APMT-MIB::hpnicfDot11APUserSecAuthStatisTable,,not-accessible,,current,,The table will provide the user authentication statistic for this AP.
.1.3.6.1.4.1.11.2.14.11.15.2.75.2.2.24.1,HPN-ICF-DOT11-APMT-MIB::hpnicfDot11APUserSecAuthStatisEntry,,not-accessible,hpnicfDot11CurAPID,current,,Each entry of the table will provide the user authentication statistic for this AP.
.1.3.6.1.4.1.11.2.14.11.15.2.75.2.2.24.1.1,HPN-ICF-DOT11-APMT-MIB::hpnicfDot11APUserAuthCurNumber,Integer32,read-only,,current,,Represents the current number of user authenticated with this AP.
.1.3.6.1.4.1.11.2.14.11.15.2.75.2.2.24.1.2,HPN-ICF-DOT11-APMT-MIB::hpnicfDot11APUserConnFailCnt,Counter32,read-only,,current,,Represents the total number of user disconnected with this AP.
.1.3.6.1.4.1.11.2.14.11.15.2.75.2.2.24.1.3,HPN-ICF-DOT11-APMT-MIB::hpnicfDot11APUserAuthReqCnt,Counter32,read-only,,current,,Represents the total number of user authentication request with this AP.
.1.3.6.1.4.1.11.2.14.11.15.2.75.2.2.24.1.4,HPN-ICF-DOT11-APMT-MIB::hpnicfDot11APUserAuthSuccCnt,Counter32,read-only,,current,,Represents the total number of successful authenticated users with this AP.
.1.3.6.1.4.1.11.2.14.11.15.2.75.2.2.24.1.5,HPN-ICF-DOT11-APMT-MIB::hpnicfDot11APUserAuthFailCnt,Counter32,read-only,,current,,Represents the total number of user authentication failures with this AP.
.1.3.6.1.4.1.11.2.14.11.15.2.75.2.2.24.1.6,HPN-ICF-DOT11-APMT-MIB::hpnicfDot11AllUserOnlineTime,TimeTicks,read-only,,current,,Represents the online time of all successful authenticated users with this AP.
.1.3.6.1.4.1.11.2.14.11.15.2.75.2.2.25,HPN-ICF-DOT11-APMT-MIB::hpnicfDot11APUserInfoStatisTable,,not-accessible,,current,,The table will provide the user information statistic of this AP.
.1.3.6.1.4.1.11.2.14.11.15.2.75.2.2.25.1,HPN-ICF-DOT11-APMT-MIB::hpnicfDot11APUserInfoStatisEntry,,not-accessible,hpnicfDot11CurAPID:hpnicfDot11APUserMacAddr,current,,Each entry of the table will provide the user information statistic of this AP.
.1.3.6.1.4.1.11.2.14.11.15.2.75.2.2.25.1.1,HPN-ICF-DOT11-APMT-MIB::hpnicfDot11APUserMacAddr,OCTET,not-accessible,,current,,Represents the mac address of user logging to this AP.
.1.3.6.1.4.1.11.2.14.11.15.2.75.2.2.25.1.2,HPN-ICF-DOT11-APMT-MIB::hpnicfDot11APUserIpAddr,IpAddress,read-only,,current,,Represents the ip address of user logging to this AP.
.1.3.6.1.4.1.11.2.14.11.15.2.75.2.2.25.1.3,HPN-ICF-DOT11-APMT-MIB::hpnicfDot11APUserLoginName,OCTET,read-only,,current,,Represents the login name of user logging to this AP.
.1.3.6.1.4.1.11.2.14.11.15.2.75.2.2.25.1.4,HPN-ICF-DOT11-APMT-MIB::hpnicfDot11APUserLoginTime,OCTET,read-only,,current,,Represents the login time of user with this AP.
.1.3.6.1.4.1.11.2.14.11.15.2.75.2.2.25.1.5,HPN-ICF-DOT11-APMT-MIB::hpnicfDot11APUserOnlineTime,TimeTicks,read-only,,current,,Represents the online time of user with this AP.
.1.3.6.1.4.1.11.2.14.11.15.2.75.2.2.25.1.6,HPN-ICF-DOT11-APMT-MIB::hpnicfDot11APUserLoginNameCM,OCTET,read-only,,current,,Represents the login name of dot1x user logging to this AP.
.1.3.6.1.4.1.11.2.14.11.15.2.75.2.2.25.1.7,HPN-ICF-DOT11-APMT-MIB::hpnicfDot11APUserAuthTypeCM,INTEGER,read-only,,current,authFree(1):associateAuth(2):portalAuth(3):autoAuth(4),Represents the authentication type of user with this AP. authFree - There is no need others authentiaction, user will surf internet after association. associateAuth - Include WEP PSK authentication. portalAuth - The authentication lunched by portal pop-up program. autoAuth - 802.1X authentication.
.1.3.6.1.4.1.11.2.14.11.15.2.75.2.2.25.1.8,HPN-ICF-DOT11-APMT-MIB::hpnicfDot11APUserTxPacketCntCM,Counter32,read-only,,current,,Represents the total count of packets sent to online users.
.1.3.6.1.4.1.11.2.14.11.15.2.75.2.2.25.1.9,HPN-ICF-DOT11-APMT-MIB::hpnicfDot11APUserTxBytesCM,Counter64,read-only,,current,,Represents the total bytes sent to online users.
.1.3.6.1.4.1.11.2.14.11.15.2.75.2.2.25.1.10,HPN-ICF-DOT11-APMT-MIB::hpnicfDot11APUserRxPacketCntCM,Counter32,read-only,,current,,Represents the total count of packets received from online users.
.1.3.6.1.4.1.11.2.14.11.15.2.75.2.2.25.1.11,HPN-ICF-DOT11-APMT-MIB::hpnicfDot11APUserRxBytesCM,Counter64,read-only,,current,,Represents the total bytes received from online users.
.1.3.6.1.4.1.11.2.14.11.15.2.75.2.2.26,HPN-ICF-DOT11-APMT-MIB::hpnicfDot11APReassocStatis2Table,,not-accessible,,current,,This table will provide statistic of reassociation for each AP.
.1.3.6.1.4.1.11.2.14.11.15.2.75.2.2.26.1,HPN-ICF-DOT11-APMT-MIB::hpnicfDot11APReassocStatis2Entry,,not-accessible,hpnicfDot11CurAPID,current,,Each entry will provide statistic of reassociation with this AP because of different reasons.
.1.3.6.1.4.1.11.2.14.11.15.2.75.2.2.26.1.1,HPN-ICF-DOT11-APMT-MIB::hpnicfDot11APReassocFailStatis2Cnt,Counter32,read-only,,current,,This object represents the count of reassociation failure because of lack of resource.
.1.3.6.1.4.1.11.2.14.11.15.2.75.2.2.27,HPN-ICF-DOT11-APMT-MIB::hpnicfDot11TrafficTable,,not-accessible,,current,,The table describes user's traffic based on ssid
.1.3.6.1.4.1.11.2.14.11.15.2.75.2.2.27.1,HPN-ICF-DOT11-APMT-MIB::hpnicfDot11TrafficEntry,,not-accessible,hpnicfDot11SSIDIndex,current,,Each entry contains the traffc information of a ssid.
.1.3.6.1.4.1.11.2.14.11.15.2.75.2.2.27.1.1,HPN-ICF-DOT11-APMT-MIB::hpnicfDot11SSIDIndex,OCTET,not-accessible,,current,,Represents the SSID.
.1.3.6.1.4.1.11.2.14.11.15.2.75.2.2.27.1.2,HPN-ICF-DOT11-APMT-MIB::hpnicfDot11UpPacketNumber,Counter64,read-only,,current,,Represents the packet count of up link.
.1.3.6.1.4.1.11.2.14.11.15.2.75.2.2.27.1.3,HPN-ICF-DOT11-APMT-MIB::hpnicfDot11UpByteNumber,Counter64,read-only,,current,,Represents the byte count of up link.
.1.3.6.1.4.1.11.2.14.11.15.2.75.2.2.27.1.4,HPN-ICF-DOT11-APMT-MIB::hpnicfDot11DownPacketNumber,Counter64,read-only,,current,,Represents the packet count of down link.
.1.3.6.1.4.1.11.2.14.11.15.2.75.2.2.27.1.5,HPN-ICF-DOT11-APMT-MIB::hpnicfDot11DownByteNumber,Counter64,read-only,,current,,Represents the byte count of down link.
.1.3.6.1.4.1.11.2.14.11.15.2.75.2.2.28,HPN-ICF-DOT11-APMT-MIB::hpnicfDot11APEchoStatisTable,,not-accessible,,current,,The table will provide the Echo statistic of this AP.
.1.3.6.1.4.1.11.2.14.11.15.2.75.2.2.28.1,HPN-ICF-DOT11-APMT-MIB::hpnicfDot11APEchoInfoStatisEntry,,not-accessible,hpnicfDot11CurAPID,current,,Each entry of the table will provide the Echo statistic of this AP.
.1.3.6.1.4.1.11.2.14.11.15.2.75.2.2.28.1.1,HPN-ICF-DOT11-APMT-MIB::hpnicfDot11APEchoAvgDelay,Integer32,read-only,,current,,This object represents the average time delay of heart beat in this AP.
.1.3.6.1.4.1.11.2.14.11.15.2.75.2.2.28.1.2,HPN-ICF-DOT11-APMT-MIB::hpnicfDot11APEchoRequestCnt,Counter64,read-only,,current,,This object represents the count of echo request in this AP.
.1.3.6.1.4.1.11.2.14.11.15.2.75.2.2.28.1.3,HPN-ICF-DOT11-APMT-MIB::hpnicfDot11APEchoRespLossCnt,Counter64,read-only,,current,,This object represents the loss count of echo response in this AP.
.1.3.6.1.4.1.11.2.14.11.15.2.75.2.2.29,HPN-ICF-DOT11-APMT-MIB::hpnicfDot11APUserSecAuthTypeStatisTable,,not-accessible,,current,,The table will provide the user authentication type statistic for this AP.
.1.3.6.1.4.1.11.2.14.11.15.2.75.2.2.29.1,HPN-ICF-DOT11-APMT-MIB::hpnicfDot11APUserSecAuthTypeStatisEntry,,not-accessible,hpnicfDot11CurAPID,current,,Each entry of the table will provide the user authentication type statistic for this AP.
.1.3.6.1.4.1.11.2.14.11.15.2.75.2.2.29.1.1,HPN-ICF-DOT11-APMT-MIB::hpnicfDot11APPortalOnlineUserNum,Integer32,read-only,,current,,Represents the number of online portal users of this AP, including MAC-trigger and IMSIAuth users.
.1.3.6.1.4.1.11.2.14.11.15.2.75.2.2.29.1.2,HPN-ICF-DOT11-APMT-MIB::hpnicfDot11APAuthFreeOnlineUserNum,Integer32,read-only,,current,,Represents the online number of user free authenticated with this AP.
.1.3.6.1.4.1.11.2.14.11.15.2.75.2.2.29.1.3,HPN-ICF-DOT11-APMT-MIB::hpnicfDot11APAssocAuthOnlineUserNum,Integer32,read-only,,current,,Represents the number of online users authenticated by associated authentication with this AP, excluding AutoAuth users.
.1.3.6.1.4.1.11.2.14.11.15.2.75.2.2.29.1.4,HPN-ICF-DOT11-APMT-MIB::hpnicfDot11APMacAuthOnlineUserNum,Integer32,read-only,,current,,Represents the online number of user MAC address authenticated with this AP.
.1.3.6.1.4.1.11.2.14.11.15.2.75.2.2.29.1.5,HPN-ICF-DOT11-APMT-MIB::hpnicfDot11APAllPortalUserOnlineTime,TimeTicks,read-only,,current,,Represents the online time of all user portal authenticated with this AP.
.1.3.6.1.4.1.11.2.14.11.15.2.75.2.2.29.1.6,HPN-ICF-DOT11-APMT-MIB::hpnicfDot11APAllAuthFreeUserOnlineTime,TimeTicks,read-only,,current,,Represents the online time of all user free authenticated with this AP.
.1.3.6.1.4.1.11.2.14.11.15.2.75.2.2.29.1.7,HPN-ICF-DOT11-APMT-MIB::hpnicfDot11APAllAssocAuthUserOnlineTime,TimeTicks,read-only,,current,,Represents the online time of all user associated authenticated with this AP.
.1.3.6.1.4.1.11.2.14.11.15.2.75.2.2.29.1.8,HPN-ICF-DOT11-APMT-MIB::hpnicfDot11APAllMacAuthUserOnlineTime,TimeTicks,read-only,,current,,Represents the online time of all user MAC address authenticated with this AP.
.1.3.6.1.4.1.11.2.14.11.15.2.75.2.2.29.1.9,HPN-ICF-DOT11-APMT-MIB::hpnicfDot11APPortalUserLostCnntCnt,Counter32,read-only,,current,,Represents the lost connective count of user portal authenticated with this AP.
.1.3.6.1.4.1.11.2.14.11.15.2.75.2.2.29.1.10,HPN-ICF-DOT11-APMT-MIB::hpnicfDot11APAuthFreeUserLostCnntCnt,Counter32,read-only,,current,,Represents the lost connective count of user free authenticated with this AP.
.1.3.6.1.4.1.11.2.14.11.15.2.75.2.2.29.1.11,HPN-ICF-DOT11-APMT-MIB::hpnicfDot11APAssocAuthUserLostCnntCnt,Counter32,read-only,,current,,Represents the lost connective count of user associate authenticated with this AP.
.1.3.6.1.4.1.11.2.14.11.15.2.75.2.2.29.1.12,HPN-ICF-DOT11-APMT-MIB::hpnicfDot11APMacAuthUserLostCnntCnt,Counter32,read-only,,current,,Represents the lost connective count of user MAC address authenticated with this AP.
.1.3.6.1.4.1.11.2.14.11.15.2.75.2.2.29.1.13,HPN-ICF-DOT11-APMT-MIB::hpnicfDot11APPortalAuthReqCnt,Counter32,read-only,,current,,Represents the request count of user portal authenticated with this AP.
.1.3.6.1.4.1.11.2.14.11.15.2.75.2.2.29.1.14,HPN-ICF-DOT11-APMT-MIB::hpnicfDot11APAssocAuthReqCnt,Counter32,read-only,,current,,Represents the request count of user associate authenticated with this AP.
.1.3.6.1.4.1.11.2.14.11.15.2.75.2.2.29.1.15,HPN-ICF-DOT11-APMT-MIB::hpnicfDot11APMacAuthReqCnt,Counter32,read-only,,current,,Represents the request count of user MAC address authenticated with this AP.
.1.3.6.1.4.1.11.2.14.11.15.2.75.2.2.29.1.16,HPN-ICF-DOT11-APMT-MIB::hpnicfDot11APPortalAuthSucCnt,Counter32,read-only,,current,,Represents the count of user portal authenticated successed with this AP.
.1.3.6.1.4.1.11.2.14.11.15.2.75.2.2.29.1.17,HPN-ICF-DOT11-APMT-MIB::hpnicfDot11APAssocAuthSucCnt,Counter32,read-only,,current,,Represents the count of user associate authenticated successed with this AP.
.1.3.6.1.4.1.11.2.14.11.15.2.75.2.2.29.1.18,HPN-ICF-DOT11-APMT-MIB::hpnicfDot11APMacAuthSucCnt,Counter32,read-only,,current,,Represents the count of user MAC address authenticated successed with this AP.
.1.3.6.1.4.1.11.2.14.11.15.2.75.2.2.29.1.19,HPN-ICF-DOT11-APMT-MIB::hpnicfDot11APPortalAuthReqFailCnt,Counter32,read-only,,current,,Represents the count of user portal authenticated failed with this AP.
.1.3.6.1.4.1.11.2.14.11.15.2.75.2.2.29.1.20,HPN-ICF-DOT11-APMT-MIB::hpnicfDot11APAssocAuthReqFailCnt,Counter32,read-only,,current,,Represents the count of user associate authenticated failed with this AP.
.1.3.6.1.4.1.11.2.14.11.15.2.75.2.2.29.1.21,HPN-ICF-DOT11-APMT-MIB::hpnicfDot11APMacAuthReqFailCnt,Counter32,read-only,,current,,Represents the count of user MAC address authenticated failed with this AP.
.1.3.6.1.4.1.11.2.14.11.15.2.75.2.2.29.1.22,HPN-ICF-DOT11-APMT-MIB::hpnicfDot11APAutoAuthOnlineUserNumCM,Integer32,read-only,,current,,Represents the number of online users authenticated by auto authentication with this AP.
.1.3.6.1.4.1.11.2.14.11.15.2.75.2.2.29.1.23,HPN-ICF-DOT11-APMT-MIB::hpnicfDot11APAllAutoAuthUserOnlineTimeCM,TimeTicks,read-only,,current,,Represents the online time of users authenticated by auto authentication with this AP.
.1.3.6.1.4.1.11.2.14.11.15.2.75.2.2.29.1.24,HPN-ICF-DOT11-APMT-MIB::hpnicfDot11APAutoAuthUserLostCnntCntCM,Counter32,read-only,,current,,Represents the disconnection count of AutoAuth users.
.1.3.6.1.4.1.11.2.14.11.15.2.75.2.2.29.1.25,HPN-ICF-DOT11-APMT-MIB::hpnicfDot11APAutoAuthReqCntCM,Counter32,read-only,,current,,Represents the count of AutoAuth requests with this AP.
.1.3.6.1.4.1.11.2.14.11.15.2.75.2.2.29.1.26,HPN-ICF-DOT11-APMT-MIB::hpnicfDot11APAutoAuthSucCntCM,Counter32,read-only,,current,,Represents the count of successful AutoAuth authentications with this AP.
.1.3.6.1.4.1.11.2.14.11.15.2.75.2.2.29.1.27,HPN-ICF-DOT11-APMT-MIB::hpnicfDot11APAutoAuthReqFailCntCM,Counter32,read-only,,current,,Represents the count of failed AutoAuth requests with this AP.
.1.3.6.1.4.1.11.2.14.11.15.2.75.2.2.30,HPN-ICF-DOT11-APMT-MIB::hpnicfDot11RadioRxStatis64Table,,not-accessible,,current,,The table will provide the reception statistic for a specific radio of AP.
.1.3.6.1.4.1.11.2.14.11.15.2.75.2.2.30.1,HPN-ICF-DOT11-APMT-MIB::hpnicfDot11RadioRxStatis64Entry,,not-accessible,hpnicfDot11CurAPID:hpnicfDot11RadioID,current,,Each entry of the table will provide the reception statistic data for each radio of a specific AP.
.1.3.6.1.4.1.11.2.14.11.15.2.75.2.2.30.1.1,HPN-ICF-DOT11-APMT-MIB::hpnicfDot11Rx64FrameDupCnt,Counter64,read-only,,current,,Represents the number of duplicate frames reception.
.1.3.6.1.4.1.11.2.14.11.15.2.75.2.2.30.1.2,HPN-ICF-DOT11-APMT-MIB::hpnicfDot11Rx64FrameCnt,Counter64,read-only,,current,,Represents the number of frames reception.
.1.3.6.1.4.1.11.2.14.11.15.2.75.2.2.30.1.3,HPN-ICF-DOT11-APMT-MIB::hpnicfDot11Rx64UcastFrameCnt,Counter64,read-only,,current,,Represents the number of unicast frames reception.
.1.3.6.1.4.1.11.2.14.11.15.2.75.2.2.30.1.4,HPN-ICF-DOT11-APMT-MIB::hpnicfDot11Rx64BcastFrameCnt,Counter64,read-only,,current,,Represents the number of broadcast frames reception.
.1.3.6.1.4.1.11.2.14.11.15.2.75.2.2.30.1.5,HPN-ICF-DOT11-APMT-MIB::hpnicfDot11Rx64McastFrameCnt,Counter64,read-only,,current,,Represents the number of multicast frames reception.
.1.3.6.1.4.1.11.2.14.11.15.2.75.2.2.30.1.6,HPN-ICF-DOT11-APMT-MIB::hpnicfDot11Rx64DiscardFrameCnt,Counter64,read-only,,current,,Represents the number of discarded frames reception.
.1.3.6.1.4.1.11.2.14.11.15.2.75.2.2.30.1.7,HPN-ICF-DOT11-APMT-MIB::hpnicfDot11Rx64FragCnt,Counter64,read-only,,current,,Represents the number of frame fragments reception.
.1.3.6.1.4.1.11.2.14.11.15.2.75.2.2.30.1.8,HPN-ICF-DOT11-APMT-MIB::hpnicfDot11Rx64FcsErrCnt,Counter64,read-only,,current,,Represents the number of FCS error frames reception.
.1.3.6.1.4.1.11.2.14.11.15.2.75.2.2.30.1.9,HPN-ICF-DOT11-APMT-MIB::hpnicfDot11Rx64FrameBytes,Counter64,read-only,,current,,Represents the bytes of frames reception.
.1.3.6.1.4.1.11.2.14.11.15.2.75.2.2.30.1.10,HPN-ICF-DOT11-APMT-MIB::hpnicfDot11Rx64UcastFrameBytes,Counter64,read-only,,current,,Represents the bytes of unicast frames reception.
.1.3.6.1.4.1.11.2.14.11.15.2.75.2.2.30.1.11,HPN-ICF-DOT11-APMT-MIB::hpnicfDot11Rx64BcastFrameBytes,Counter64,read-only,,current,,Represents the bytes of broadcast frames reception.
.1.3.6.1.4.1.11.2.14.11.15.2.75.2.2.30.1.12,HPN-ICF-DOT11-APMT-MIB::hpnicfDot11Rx64McastFrameBytes,Counter64,read-only,,current,,Represents the bytes of multicast frames reception.
.1.3.6.1.4.1.11.2.14.11.15.2.75.2.2.30.1.13,HPN-ICF-DOT11-APMT-MIB::hpnicfDot11Rx64DiscardFrameBytes,Counter64,read-only,,current,,Represents the bytes of discarded frames reception.
.1.3.6.1.4.1.11.2.14.11.15.2.75.2.2.30.1.14,HPN-ICF-DOT11-APMT-MIB::hpnicfDot11Rx64MgmtFrameCnt,Counter64,read-only,,current,,Represents the number of management frames reception.
.1.3.6.1.4.1.11.2.14.11.15.2.75.2.2.30.1.15,HPN-ICF-DOT11-APMT-MIB::hpnicfDot11Rx64CtrlFrameCnt,Counter64,read-only,,current,,Represents the number of control frames reception.
.1.3.6.1.4.1.11.2.14.11.15.2.75.2.2.30.1.16,HPN-ICF-DOT11-APMT-MIB::hpnicfDot11Rx64DataFrameCnt,Counter64,read-only,,current,,Represents the number of data frames reception.
.1.3.6.1.4.1.11.2.14.11.15.2.75.2.2.30.1.17,HPN-ICF-DOT11-APMT-MIB::hpnicfDot11Rx64DecryptErrorCnt,Counter64,read-only,,current,,Represents the number of decryption error reception.
.1.3.6.1.4.1.11.2.14.11.15.2.75.2.2.30.1.18,HPN-ICF-DOT11-APMT-MIB::hpnicfDot11Rx64AuthenFrameCnt,Counter64,read-only,,current,,Represents the number of authentication frame reception.
.1.3.6.1.4.1.11.2.14.11.15.2.75.2.2.30.1.19,HPN-ICF-DOT11-APMT-MIB::hpnicfDot11Rx64AssociateFrameCnt,Counter64,read-only,,current,,Represents the number of associate frame reception.
.1.3.6.1.4.1.11.2.14.11.15.2.75.2.2.30.1.20,HPN-ICF-DOT11-APMT-MIB::hpnicfDot11Rx64PhyErrorCnt,Counter64,read-only,,current,,Represents the number of physical error reception.
.1.3.6.1.4.1.11.2.14.11.15.2.75.2.2.30.1.21,HPN-ICF-DOT11-APMT-MIB::hpnicfDot11Rx64MICErrorCnt,Counter64,read-only,,current,,Represents the number of MIC verification error reception.
.1.3.6.1.4.1.11.2.14.11.15.2.75.2.2.30.1.22,HPN-ICF-DOT11-APMT-MIB::hpnicfDot11Rx64DataFrameBytes,Counter64,read-only,,current,,Represents the bytes of data frames reception.
.1.3.6.1.4.1.11.2.14.11.15.2.75.2.2.30.1.23,HPN-ICF-DOT11-APMT-MIB::hpnicfDot11Rx64PayloadBytes,Counter64,read-only,,current,,Represents the payload bytes of data frames reception.
.1.3.6.1.4.1.11.2.14.11.15.2.75.2.2.30.1.24,HPN-ICF-DOT11-APMT-MIB::hpnicfDot11Rx64DataFrameBytesCM,Counter64,read-only,,current,,Represents the number of received data frames, excluding retransmitted frames.
.1.3.6.1.4.1.11.2.14.11.15.2.75.2.2.31,HPN-ICF-DOT11-APMT-MIB::hpnicfDot11RadioTxStatis64Table,,not-accessible,,current,,The table will provide the transmission statistic for a specific radio of AP.
.1.3.6.1.4.1.11.2.14.11.15.2.75.2.2.31.1,HPN-ICF-DOT11-APMT-MIB::hpnicfDot11RadioTxStatis64Entry,,not-accessible,hpnicfDot11CurAPID:hpnicfDot11RadioID,current,,Each entry of the table will provide the transmission statistic data for each radio of a specific AP.
.1.3.6.1.4.1.11.2.14.11.15.2.75.2.2.31.1.1,HPN-ICF-DOT11-APMT-MIB::hpnicfDot11Tx64FragCnt,Counter64,read-only,,current,,Represents the number of fragmented frames transmission.
.1.3.6.1.4.1.11.2.14.11.15.2.75.2.2.31.1.2,HPN-ICF-DOT11-APMT-MIB::hpnicfDot11Tx64FailedCnt,Counter64,read-only,,current,,Represents the number of failures transmission.
.1.3.6.1.4.1.11.2.14.11.15.2.75.2.2.31.1.3,HPN-ICF-DOT11-APMT-MIB::hpnicfDot11Tx64RetryCnt,Counter64,read-only,,current,,Represents the number of retries transmission.
.1.3.6.1.4.1.11.2.14.11.15.2.75.2.2.31.1.4,HPN-ICF-DOT11-APMT-MIB::hpnicfDot11Tx64MultiRetryCnt,Counter64,read-only,,current,,Represents the number of transmits that required more than one retry transmission.
.1.3.6.1.4.1.11.2.14.11.15.2.75.2.2.31.1.5,HPN-ICF-DOT11-APMT-MIB::hpnicfDot11Tx64RtsSuccessCnt,Counter64,read-only,,current,,Represents the number of successful RTS (Request to send) transmission.
.1.3.6.1.4.1.11.2.14.11.15.2.75.2.2.31.1.6,HPN-ICF-DOT11-APMT-MIB::hpnicfDot11Tx64RtsFailCnt,Counter64,read-only,,current,,Represents the number of RTS failures transmission.
.1.3.6.1.4.1.11.2.14.11.15.2.75.2.2.31.1.7,HPN-ICF-DOT11-APMT-MIB::hpnicfDot11Tx64AckFailCnt,Counter64,read-only,,current,,Represents the number of acknowledgement failures transmission.
.1.3.6.1.4.1.11.2.14.11.15.2.75.2.2.31.1.8,HPN-ICF-DOT11-APMT-MIB::hpnicfDot11Tx64FrameCnt,Counter64,read-only,,current,,Represents the total number of frames transmission.
.1.3.6.1.4.1.11.2.14.11.15.2.75.2.2.31.1.9,HPN-ICF-DOT11-APMT-MIB::hpnicfDot11Tx64UcastFrameCnt,Counter64,read-only,,current,,Represents the number of unicast frames transmission.
.1.3.6.1.4.1.11.2.14.11.15.2.75.2.2.31.1.10,HPN-ICF-DOT11-APMT-MIB::hpnicfDot11Tx64BcastFrameCnt,Counter64,read-only,,current,,Represents the number of broadcast frames transmission.
.1.3.6.1.4.1.11.2.14.11.15.2.75.2.2.31.1.11,HPN-ICF-DOT11-APMT-MIB::hpnicfDot11Tx64McastFrameCnt,Counter64,read-only,,current,,Represents the number of multicast frames transmission.
.1.3.6.1.4.1.11.2.14.11.15.2.75.2.2.31.1.12,HPN-ICF-DOT11-APMT-MIB::hpnicfDot11Tx64DiscardFrameCnt,Counter64,read-only,,current,,Represents the number of discarded frames transmission.
.1.3.6.1.4.1.11.2.14.11.15.2.75.2.2.31.1.13,HPN-ICF-DOT11-APMT-MIB::hpnicfDot11Tx64FrameBytes,Counter64,read-only,,current,,Represents the total bytes of frames transmission.
.1.3.6.1.4.1.11.2.14.11.15.2.75.2.2.31.1.14,HPN-ICF-DOT11-APMT-MIB::hpnicfDot11Tx64UcastFrameBytes,Counter64,read-only,,current,,Represents the bytes of unicast frames transmission.
.1.3.6.1.4.1.11.2.14.11.15.2.75.2.2.31.1.15,HPN-ICF-DOT11-APMT-MIB::hpnicfDot11Tx64BcastFrameBytes,Counter64,read-only,,current,,Represents the bytes of broadcast frames transmission.
.1.3.6.1.4.1.11.2.14.11.15.2.75.2.2.31.1.16,HPN-ICF-DOT11-APMT-MIB::hpnicfDot11Tx64McastFrameBytes,Counter64,read-only,,current,,Represents the bytes of multicast frames transmission.
.1.3.6.1.4.1.11.2.14.11.15.2.75.2.2.31.1.17,HPN-ICF-DOT11-APMT-MIB::hpnicfDot11Tx64DiscardFrameBytes,Counter64,read-only,,current,,Represents the bytes of discard frames transmission.
.1.3.6.1.4.1.11.2.14.11.15.2.75.2.2.31.1.18,HPN-ICF-DOT11-APMT-MIB::hpnicfDot11Tx64AuthenFrameCnt,Counter64,read-only,,current,,Represents the number of authentication frame transmission.
.1.3.6.1.4.1.11.2.14.11.15.2.75.2.2.31.1.19,HPN-ICF-DOT11-APMT-MIB::hpnicfDot11Tx64AssociateFrameCnt,Counter64,read-only,,current,,Represents the number of associate frame transmission.
.1.3.6.1.4.1.11.2.14.11.15.2.75.2.2.31.1.20,HPN-ICF-DOT11-APMT-MIB::hpnicfDot11Tx64DataFrameCnt,Counter64,read-only,,current,,Represents the number of data frame transmission.
.1.3.6.1.4.1.11.2.14.11.15.2.75.2.2.31.1.21,HPN-ICF-DOT11-APMT-MIB::hpnicfDot11Tx64DataFrameBytes,Counter64,read-only,,current,,Represents the bytes of data frame transmission.
.1.3.6.1.4.1.11.2.14.11.15.2.75.2.2.31.1.22,HPN-ICF-DOT11-APMT-MIB::hpnicfDot11Tx64MSDUCnt,Counter64,read-only,,current,,Represents the total number of MSDU transmission.
.1.3.6.1.4.1.11.2.14.11.15.2.75.2.2.31.1.23,HPN-ICF-DOT11-APMT-MIB::hpnicfDot11Tx64DiscardMSDUCnt,Counter64,read-only,,current,,Represents the number of discarded MSDU transmission.
.1.3.6.1.4.1.11.2.14.11.15.2.75.2.2.31.1.24,HPN-ICF-DOT11-APMT-MIB::hpnicfDot11Tx64RetryMSDUCnt,Counter64,read-only,,current,,Represents the number of retransfer MSDU transmission.
.1.3.6.1.4.1.11.2.14.11.15.2.75.2.2.31.1.25,HPN-ICF-DOT11-APMT-MIB::hpnicfDot11Tx64PayloadBytes,Counter64,read-only,,current,,Represents the payload bytes of data frames transmission.
.1.3.6.1.4.1.11.2.14.11.15.2.75.2.2.31.1.26,HPN-ICF-DOT11-APMT-MIB::hpnicfDot11Tx64MgtFrameCnt,Counter64,read-only,,current,,Represents the number of management frames transmission.
.1.3.6.1.4.1.11.2.14.11.15.2.75.2.2.31.1.27,HPN-ICF-DOT11-APMT-MIB::hpnicfDot11Tx64CtrlFrameCnt,Counter64,read-only,,current,,Represents the number of control frames transmission.
.1.3.6.1.4.1.11.2.14.11.15.2.75.2.2.31.1.28,HPN-ICF-DOT11-APMT-MIB::hpnicfDot11Tx64MACErrCnt,Counter64,read-only,,current,,Represents the number of MAC error frame transmission.
.1.3.6.1.4.1.11.2.14.11.15.2.75.2.2.31.1.29,HPN-ICF-DOT11-APMT-MIB::hpnicfDot11Tx64ErrFrameCnt,Counter64,read-only,,current,,Represents the number of error frame transmission.
.1.3.6.1.4.1.11.2.14.11.15.2.75.2.2.32,HPN-ICF-DOT11-APMT-MIB::hpnicfDot11BSSRxStatis64Table,,not-accessible,,current,,The table will provide the reception statistic for a specific BSS on a radio.
.1.3.6.1.4.1.11.2.14.11.15.2.75.2.2.32.1,HPN-ICF-DOT11-APMT-MIB::hpnicfDot11BSSRxStatis64Entry,,not-accessible,hpnicfDot11CurAPID:hpnicfDot11RadioID:hpnicfDot11WlanID,current,,Each entry of the table will provide the reception statistic data for each BSS on a specific radio.
.1.3.6.1.4.1.11.2.14.11.15.2.75.2.2.32.1.1,HPN-ICF-DOT11-APMT-MIB::hpnicfDot11BSSRx64FrameCnt,Counter64,read-only,,current,,Represents the number of frames reception with this BSS.
.1.3.6.1.4.1.11.2.14.11.15.2.75.2.2.32.1.2,HPN-ICF-DOT11-APMT-MIB::hpnicfDot11BSSRx64FrameBytes,Counter64,read-only,,current,,Represents the bytes of frames reception with this BSS.
.1.3.6.1.4.1.11.2.14.11.15.2.75.2.2.32.1.3,HPN-ICF-DOT11-APMT-MIB::hpnicfDot11BSSRx64DataFrameCnt,Counter64,read-only,,current,,Represents the number of data frames reception with this BSS.
.1.3.6.1.4.1.11.2.14.11.15.2.75.2.2.32.1.4,HPN-ICF-DOT11-APMT-MIB::hpnicfDot11BSSRx64DataFrameBytes,Counter64,read-only,,current,,Represents the bytes of data frames reception with this BSS.
.1.3.6.1.4.1.11.2.14.11.15.2.75.2.2.32.1.5,HPN-ICF-DOT11-APMT-MIB::hpnicfDot11BSSRx64AssocFrameCnt,Counter64,read-only,,current,,Represents the number of associate frames reception with this BSS.
.1.3.6.1.4.1.11.2.14.11.15.2.75.2.2.32.1.6,HPN-ICF-DOT11-APMT-MIB::hpnicfDot11BSSRx64PayloadBytes,Counter64,read-only,,current,,Represents the payload bytes of data frames reception with this BSS.
.1.3.6.1.4.1.11.2.14.11.15.2.75.2.2.32.1.7,HPN-ICF-DOT11-APMT-MIB::hpnicfDot11BSSRx64UniFrameCnt,Counter64,read-only,,current,,Represents the number of unicast frames reception with this BSS.
.1.3.6.1.4.1.11.2.14.11.15.2.75.2.2.32.1.8,HPN-ICF-DOT11-APMT-MIB::hpnicfDot11BSSRx64NonUniFrameCnt,Counter64,read-only,,current,,Represents the number of non-unicast frames reception with this BSS.
.1.3.6.1.4.1.11.2.14.11.15.2.75.2.2.32.1.9,HPN-ICF-DOT11-APMT-MIB::hpnicfDot11BSSRx64AuthenFrameCnt,Counter64,read-only,,current,,Represents the number of authentication frames reception with this BSS.
.1.3.6.1.4.1.11.2.14.11.15.2.75.2.2.33,HPN-ICF-DOT11-APMT-MIB::hpnicfDot11BSSTxStatis64Table,,not-accessible,,current,,The table will provide the transmission statistic for a specific BSS on a radio.
.1.3.6.1.4.1.11.2.14.11.15.2.75.2.2.33.1,HPN-ICF-DOT11-APMT-MIB::hpnicfDot11BSSTxStatis64Entry,,not-accessible,hpnicfDot11CurAPID:hpnicfDot11RadioID:hpnicfDot11WlanID,current,,Each entry of the table will provide the transmission statistic data for each BSS on a specific radio.
.1.3.6.1.4.1.11.2.14.11.15.2.75.2.2.33.1.1,HPN-ICF-DOT11-APMT-MIB::hpnicfDot11BSSTx64FrameCnt,Counter64,read-only,,current,,Represents the total number of frames transmission with this BSS.
.1.3.6.1.4.1.11.2.14.11.15.2.75.2.2.33.1.2,HPN-ICF-DOT11-APMT-MIB::hpnicfDot11BSSTx64FrameBytes,Counter64,read-only,,current,,Represents the total number of bytes transmission with this BSS.
.1.3.6.1.4.1.11.2.14.11.15.2.75.2.2.33.1.3,HPN-ICF-DOT11-APMT-MIB::hpnicfDot11BSSTx64DataFrameCnt,Counter64,read-only,,current,,Represents the number of data frame transmission with this BSS.
.1.3.6.1.4.1.11.2.14.11.15.2.75.2.2.33.1.4,HPN-ICF-DOT11-APMT-MIB::hpnicfDot11BSSTx64DataFrameBytes,Counter64,read-only,,current,,Represents the bytes of data frame transmission with this BSS.
.1.3.6.1.4.1.11.2.14.11.15.2.75.2.2.33.1.5,HPN-ICF-DOT11-APMT-MIB::hpnicfDot11BSSTx64AssocFrameCnt,Counter64,read-only,,current,,Represents the number of associate frame transmission with this BSS.
.1.3.6.1.4.1.11.2.14.11.15.2.75.2.2.33.1.6,HPN-ICF-DOT11-APMT-MIB::hpnicfDot11BSSTx64PayloadBytes,Counter64,read-only,,current,,Represents the payload bytes of data frame transmission with this BSS.
.1.3.6.1.4.1.11.2.14.11.15.2.75.2.2.33.1.7,HPN-ICF-DOT11-APMT-MIB::hpnicfDot11BSSTx64RetryCnt,Counter64,read-only,,current,,Represents the number of bytes retransmitted with this BSS.
.1.3.6.1.4.1.11.2.14.11.15.2.75.2.2.33.1.8,HPN-ICF-DOT11-APMT-MIB::hpnicfDot11BSSTx64UniFrameCnt,Counter64,read-only,,current,,Represents the number of unicast frames transmission with this BSS.
.1.3.6.1.4.1.11.2.14.11.15.2.75.2.2.33.1.9,HPN-ICF-DOT11-APMT-MIB::hpnicfDot11BSSTx64NonUniFrameCnt,Counter64,read-only,,current,,Represents the number of non-unicast frames transmission with this BSS.
.1.3.6.1.4.1.11.2.14.11.15.2.75.2.2.33.1.10,HPN-ICF-DOT11-APMT-MIB::hpnicfDot11BSSTx64AuthenFrameCnt,Counter64,read-only,,current,,Represents the number of authentication frames transmission with this BSS.
.1.3.6.1.4.1.11.2.14.11.15.2.75.2.2.34,HPN-ICF-DOT11-APMT-MIB::hpnicfDot11APPacketMCSRateStatis2Table,,not-accessible,,current,,This table provides packet statistics based on MCS rate.
.1.3.6.1.4.1.11.2.14.11.15.2.75.2.2.34.1,HPN-ICF-DOT11-APMT-MIB::hpnicfDot11APPacketMCSRateStatis2Entry,,not-accessible,hpnicfDot11CurAPID:hpnicfDot11RadioID:hpnicfDot11APPacketMCS2Rate,current,,Each entry provides packet statistics based on MCS rate for each radio of a specific AP.
.1.3.6.1.4.1.11.2.14.11.15.2.75.2.2.34.1.1,HPN-ICF-DOT11-APMT-MIB::hpnicfDot11APPacketMCS2Rate,Integer32,not-accessible,,current,,Represents data transmission rate(Tenfold as actual rate).
.1.3.6.1.4.1.11.2.14.11.15.2.75.2.2.34.1.2,HPN-ICF-DOT11-APMT-MIB::hpnicfDot11APRXPacketMCSRate2Count,Counter64,read-only,,current,,Represents the count of packets received based on data transmission rate.
.1.3.6.1.4.1.11.2.14.11.15.2.75.2.2.34.1.3,HPN-ICF-DOT11-APMT-MIB::hpnicfDot11APTXPacketMCSRate2Count,Counter64,read-only,,current,,Represents the count of packets transmitted base on data transmission rate.
.1.3.6.1.4.1.11.2.14.11.15.2.75.2.2.35,HPN-ICF-DOT11-APMT-MIB::hpnicfDot11APUserSecAuthStatisCMTable,,not-accessible,,current,,The table provides the user authentication statistics.
.1.3.6.1.4.1.11.2.14.11.15.2.75.2.2.35.1,HPN-ICF-DOT11-APMT-MIB::hpnicfDot11APUserSecAuthStatisCMEntry,,not-accessible,hpnicfDot11CurAPID:hpnicfDot11RadioID:hpnicfDot11WlanID,current,,Each entry of the table provides the user authentication statistics of AP.
.1.3.6.1.4.1.11.2.14.11.15.2.75.2.2.35.1.1,HPN-ICF-DOT11-APMT-MIB::hpnicfDot11APUserConnFailCntCM,Counter32,read-only,,current,,Represents the failed connection count of users with this AP.
.1.3.6.1.4.1.11.2.14.11.15.2.75.2.2.35.1.2,HPN-ICF-DOT11-APMT-MIB::hpnicfDot11APUserAuthReqCntCM,Counter32,read-only,,current,,Represents the total number of user authentication requests with this AP.
.1.3.6.1.4.1.11.2.14.11.15.2.75.2.2.35.1.3,HPN-ICF-DOT11-APMT-MIB::hpnicfDot11APUserAuthSuccCntCM,Counter32,read-only,,current,,Represents the total number of successful user authentications with this AP.
.1.3.6.1.4.1.11.2.14.11.15.2.75.2.2.35.1.4,HPN-ICF-DOT11-APMT-MIB::hpnicfDot11APUserAuthFailCntCM,Counter32,read-only,,current,,Represents the total number of failed user authentications with this AP.
.1.3.6.1.4.1.11.2.14.11.15.2.75.2.2.35.1.5,HPN-ICF-DOT11-APMT-MIB::hpnicfDot11AllUserOnlineTimeCM,TimeTicks,read-only,,current,,Represents the online time of all users with this AP.
.1.3.6.1.4.1.11.2.14.11.15.2.75.2.3,HPN-ICF-DOT11-APMT-MIB::hpnicfDot11APMtNotifyGroup,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.2.75.2.3.0,HPN-ICF-DOT11-APMT-MIB::hpnicfDot11APMtTraps,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.2.75.2.3.0.1,HPN-ICF-DOT11-APMT-MIB::hpnicfDot11APMtWorkModeChgTrap,,,,,,The notification will be sent when AP changes the work mode, and hpnicfDot11APWorkMode suggests which work mode will be used by AP.
.1.3.6.1.4.1.11.2.14.11.15.2.75.2.3.0.2,HPN-ICF-DOT11-APMT-MIB::hpnicfDot11APMtCfgErrorTrap,,,,,,The notification will represent errors caused by the configuration operation of AP.
.1.3.6.1.4.1.11.2.14.11.15.2.75.2.3.0.3,HPN-ICF-DOT11-APMT-MIB::hpnicfDot11APMtRadioFailTrap,,,,,,The notification will notify which the operational status of radio becomes down.
.1.3.6.1.4.1.11.2.14.11.15.2.75.2.3.0.4,HPN-ICF-DOT11-APMT-MIB::hpnicfDot11APMtRadioFailRecoverTrap,,,,,,The notification will notify the operational status of which radio becomes up again.
.1.3.6.1.4.1.11.2.14.11.15.2.75.2.3.0.5,HPN-ICF-DOT11-APMT-MIB::hpnicfDot11APMtRdoChanlChgTrap,,,,,,The notification will represent which radio changes the channel.
.1.3.6.1.4.1.11.2.14.11.15.2.75.2.3.0.6,HPN-ICF-DOT11-APMT-MIB::hpnicfDot11APMtTimeSynFail,,,,,,The notification will be sent when AC and AP failed to synchronize their time.
.1.3.6.1.4.1.11.2.14.11.15.2.75.2.3.0.7,HPN-ICF-DOT11-APMT-MIB::hpnicfDot11APMtChlIntfDetected,,,,,,The notification will be sent when some ambient device interferes with current channel.
.1.3.6.1.4.1.11.2.14.11.15.2.75.2.3.0.8,HPN-ICF-DOT11-APMT-MIB::hpnicfDot11APMtIntfAPDetected,,,,,,The notification will be sent when some ambient AP interferes with current channel.
.1.3.6.1.4.1.11.2.14.11.15.2.75.2.3.0.9,HPN-ICF-DOT11-APMT-MIB::hpnicfDot11APMtIntfStaDetected,,,,,,The notification will be sent when some ambient station interferes with current channel.
.1.3.6.1.4.1.11.2.14.11.15.2.75.2.3.0.10,HPN-ICF-DOT11-APMT-MIB::hpnicfDot11APMtIPChange,,,,,,The notification will be sent when IP address of the AP changes.
.1.3.6.1.4.1.11.2.14.11.15.2.75.2.3.0.11,HPN-ICF-DOT11-APMT-MIB::hpnicfDot11APFlashWriteFailure,,,,,,The notification will be sent when AP failed to write data into flash.
.1.3.6.1.4.1.11.2.14.11.15.2.75.2.3.0.12,HPN-ICF-DOT11-APMT-MIB::hpnicfDot11APSysReboot,,,,,,The notification will be sent when AP reboots.
.1.3.6.1.4.1.11.2.14.11.15.2.75.2.3.0.13,HPN-ICF-DOT11-APMT-MIB::hpnicfDot11APMtAvailChlTooLow,,,,,,The notification will be sent when number of available channels is too low. 
.1.3.6.1.4.1.11.2.14.11.15.2.75.2.3.0.14,HPN-ICF-DOT11-APMT-MIB::hpnicfDot11APImgDwldSuccess,,,,,,The notification will be sent when AP succeeds to download image from AC. 
.1.3.6.1.4.1.11.2.14.11.15.2.75.2.3.0.15,HPN-ICF-DOT11-APMT-MIB::hpnicfDot11APInterfDetectedTrap,,,,,,This notification will be sent when some ambient AP interferes with current channel.
.1.3.6.1.4.1.11.2.14.11.15.2.75.2.3.0.16,HPN-ICF-DOT11-APMT-MIB::hpnicfDot11APInterfClearTrap,,,,,,This notification will be sent when interference caused by ambient APs on the current channel disappears.
.1.3.6.1.4.1.11.2.14.11.15.2.75.2.3.0.17,HPN-ICF-DOT11-APMT-MIB::hpnicfDot11StaInterfDetectedTrap,,,,,,This notification will be sent when interference caused by ambient STAs on the current channel disappears.
.1.3.6.1.4.1.11.2.14.11.15.2.75.2.3.0.18,HPN-ICF-DOT11-APMT-MIB::hpnicfDot11StaInterfClearTrap,,,,,,This notification will be sent when interference caused by ambient devices on the current channel happens.
.1.3.6.1.4.1.11.2.14.11.15.2.75.2.3.0.19,HPN-ICF-DOT11-APMT-MIB::hpnicfDot11OtherDevIntDetectedTrap,,,,,,This notification will be sent when interference caused by ambient devices on the current channel disappears.
.1.3.6.1.4.1.11.2.14.11.15.2.75.2.3.0.20,HPN-ICF-DOT11-APMT-MIB::hpnicfDot11OtherDevIntClearTrap,,,,,,This notification will be sent when previous ambient device disappeared with the same channel.
.1.3.6.1.4.1.11.2.14.11.15.2.75.2.3.0.21,HPN-ICF-DOT11-APMT-MIB::hpnicfDot11APModuleTroubleTrap,,,,,,This notification will be sent when WLAN module failed.
.1.3.6.1.4.1.11.2.14.11.15.2.75.2.3.0.22,HPN-ICF-DOT11-APMT-MIB::hpnicfDot11APModuleTroubleClearTrap,,,,,,The notification will be sent when WLAN module recovered.
.1.3.6.1.4.1.11.2.14.11.15.2.75.2.3.0.23,HPN-ICF-DOT11-APMT-MIB::hpnicfDot11APRadioDownTrap,,,,,,This notification will be sent when WLAN links interrupted.
.1.3.6.1.4.1.11.2.14.11.15.2.75.2.3.0.24,HPN-ICF-DOT11-APMT-MIB::hpnicfDot11APRadioDownRecovTrap,,,,,,This notification will be sent when WLAN links recover.
.1.3.6.1.4.1.11.2.14.11.15.2.75.2.3.0.25,HPN-ICF-DOT11-APMT-MIB::hpnicfDot11APStaFullTrap,,,,,,This notification will be sent when STA number reach limit number.
.1.3.6.1.4.1.11.2.14.11.15.2.75.2.3.0.26,HPN-ICF-DOT11-APMT-MIB::hpnicfDot11APStaFullRecoverTrap,,,,,,This notification will be sent when STA number recover enough level.
.1.3.6.1.4.1.11.2.14.11.15.2.75.2.3.0.27,HPN-ICF-DOT11-APMT-MIB::hpnicfDot11DFSFreeCntBelowThrRecov,,,,,,This notification will be sent when available channels number recover enough level.
.1.3.6.1.4.1.11.2.14.11.15.2.75.2.3.0.28,HPN-ICF-DOT11-APMT-MIB::hpnicfDot11APCpuUsageHigh,,,,,,The notification will be sent when the AP CPU usage exceeds the threshold. 
.1.3.6.1.4.1.11.2.14.11.15.2.75.2.3.0.29,HPN-ICF-DOT11-APMT-MIB::hpnicfDot11APCpuUsageHighRecover,,,,,,The notification will be sent when the AP CPU usage descends the threshold. 
.1.3.6.1.4.1.11.2.14.11.15.2.75.2.3.0.30,HPN-ICF-DOT11-APMT-MIB::hpnicfDot11APMemUsageHigh,,,,,,The notification will be sent when the AP memory usage exceeds the threshold. 
.1.3.6.1.4.1.11.2.14.11.15.2.75.2.3.0.31,HPN-ICF-DOT11-APMT-MIB::hpnicfDot11APMemUsageHighRecover,,,,,,The notification will be sent when the AP memory usage descends the threshold. 
.1.3.6.1.4.1.11.2.14.11.15.2.75.2.3.0.32,HPN-ICF-DOT11-APMT-MIB::hpnicfDot11APTrapUserCntExceedThre,,,,,,The notification will be sent when the online user counter exceeds the threshold.
.1.3.6.1.4.1.11.2.14.11.15.2.75.2.3.0.33,HPN-ICF-DOT11-APMT-MIB::hpnicfDot11APMtDetectedIntfAP,,,,,,This notification will be sent when some ambient AP interferes with current channel.
.1.3.6.1.4.1.11.2.14.11.15.2.75.2.3.0.34,HPN-ICF-DOT11-APMT-MIB::hpnicfDot11APMtDetectedIntfSTA,,,,,,This notification will be sent when some ambient STA interferes with current channel.
.1.3.6.1.4.1.11.2.14.11.15.2.75.2.3.0.35,HPN-ICF-DOT11-APMT-MIB::hpnicfDot11APMtDetectedIntfOtherDev,,,,,,This notification will be sent when other device interferes with current channel.
.1.3.6.1.4.1.11.2.14.11.15.2.75.2.3.0.36,HPN-ICF-DOT11-APMT-MIB::hpnicfDot11DetcAdjChlIntfAP,,,,,,This notification will be sent when some ambient AP interferes with adjacent channel.
.1.3.6.1.4.1.11.2.14.11.15.2.75.2.3.0.37,HPN-ICF-DOT11-APMT-MIB::hpnicfDot11DetcAdjChlIntfAPClear,,,,,,This notification will be sent when interference caused by ambient APs on the adjacent channel disappears.
.1.3.6.1.4.1.11.2.14.11.15.2.75.2.3.1,HPN-ICF-DOT11-APMT-MIB::hpnicfDot11APMtTrapVarObjects,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.2.75.2.3.1.1,HPN-ICF-DOT11-APMT-MIB::hpnicfDot11APMtTrapCfgErrReason,OCTET,accessible-for-notify,,current,,Represents errors caused by configuration operation.
.1.3.6.1.4.1.11.2.14.11.15.2.75.2.3.1.2,HPN-ICF-DOT11-APMT-MIB::hpnicfDot11APMtTrapRadioFailReason,INTEGER,accessible-for-notify,,current,config(1):hpnicferror(2):swerror(3):radar(4):unknown(8),Represents errors caused by configuration operation. The following values are supported: config - Configuration error hpnicferror - Hardware error swerror - Software error radar - Radar Detection unknown - Unknown reason
.1.3.6.1.4.1.11.2.14.11.15.2.75.2.3.1.3,HPN-ICF-DOT11-APMT-MIB::hpnicfDot11APMtTrapOldChannel,Integer32,accessible-for-notify,,current,,Represents which channel the radio used to use.
.1.3.6.1.4.1.11.2.14.11.15.2.75.2.3.1.4,HPN-ICF-DOT11-APMT-MIB::hpnicfDot11APMtTrapNewChannel,Integer32,accessible-for-notify,,current,,Represents which channel the radio will use.
.1.3.6.1.4.1.11.2.14.11.15.2.75.2.3.1.5,HPN-ICF-DOT11-APMT-MIB::hpnicfDot11APChannelChgMode,INTEGER,accessible-for-notify,,current,manual(1):auto(2),Represents the channel change mode for a radio.
.1.3.6.1.4.1.11.2.14.11.15.2.75.2.3.1.6,HPN-ICF-DOT11-APMT-MIB::hpnicfDot11APChgWorkMode,INTEGER,accessible-for-notify,,current,normal(1):monitor(2):hybrid(3),Represents what work mode for AP. The following values are supported: normal - AP will supply WLAN service. monitor - AP will be a monitor to detect attack. hybrid - AP will supply WLAN service and detect attack.
.1.3.6.1.4.1.11.2.14.11.15.2.75.2.3.1.7,HPN-ICF-DOT11-APMT-MIB::hpnicfDot11APIntfDevMACAddress,OCTET,accessible-for-notify,,current,,Represents MAC address of the device which triggers the notification.
.1.3.6.1.4.1.11.2.14.11.15.2.75.2.3.1.8,HPN-ICF-DOT11-APMT-MIB::hpnicfDot11APMtTrapOldIPAddr,IpAddress,accessible-for-notify,,current,,Represents the IP address of AP.
.1.3.6.1.4.1.11.2.14.11.15.2.75.2.3.1.9,HPN-ICF-DOT11-APMT-MIB::hpnicfDot11CurrInterfDetectedNum,Integer32,accessible-for-notify,,current,,Represents the number of interfere detected.
.1.3.6.1.4.1.11.2.14.11.15.2.75.2.3.1.10,HPN-ICF-DOT11-APMT-MIB::hpnicfDot11StaFullReason,INTEGER,accessible-for-notify,,current,ap(1):bss(2):radio(3):radioConcur(4):radiopolicy(5):ac(6):acConcur(7):aid(8),Reports which kind maximum number of STA is reached. New STA is not able to associate.
.1.3.6.1.4.1.11.2.14.11.15.2.75.2.3.1.11,HPN-ICF-DOT11-APMT-MIB::hpnicfDot11StaLimitNumber,Integer32,accessible-for-notify,,current,,Represents the limit number of STA.
.1.3.6.1.4.1.11.2.14.11.15.2.75.2.3.1.12,HPN-ICF-DOT11-APMT-MIB::hpnicfDot11APRadioDownReason,INTEGER,accessible-for-notify,,current,phyicalUnusable(1):configDisable(2):operatinUnusable(3):apTunnelDown(4),Reports the reason why WLAN links is interrupted.
.1.3.6.1.4.1.11.2.14.11.15.2.75.2.3.1.13,HPN-ICF-DOT11-APMT-MIB::hpnicfDot11InterfMacList,OCTET,accessible-for-notify,,current,,Represents MAC address list of interfere detected.
.1.3.6.1.4.1.11.2.14.11.15.2.75.2.3.1.14,HPN-ICF-DOT11-APMT-MIB::hpnicfDot11APTrapUserCnt,Integer32,accessible-for-notify,,current,,Represents the online user counter of AP.
.1.3.6.1.4.1.11.2.14.11.15.2.75.2.3.1.15,HPN-ICF-DOT11-APMT-MIB::hpnicfDot11APTrapUserThreshold,Integer32,accessible-for-notify,,current,,Represents threshold of AP's online user counter.
.1.3.6.1.4.1.11.2.14.11.15.2.75.2.3.1.16,HPN-ICF-DOT11-APMT-MIB::hpnicfDot11APMtChanlChgCount,Integer32,accessible-for-notify,,current,,Represents how many times that channel changed.
.1.3.6.1.4.1.11.2.14.11.15.2.75.2.3.1.17,HPN-ICF-DOT11-APMT-MIB::hpnicfDot11APMtFormerApVersion,OCTET,accessible-for-notify,,current,,Represents former software version of AP.
.1.3.6.1.4.1.11.2.14.11.15.2.75.2.3.1.18,HPN-ICF-DOT11-APMT-MIB::hpnicfDot11APMtAPID,OCTET,accessible-for-notify,,current,,To uniquely identify each AP.
.1.3.6.1.4.1.11.2.14.11.15.2.75.2.3.1.19,HPN-ICF-DOT11-APMT-MIB::hpnicfDot11APMtRadioID,Integer32,accessible-for-notify,,current,,Represents each radio.
.1.3.6.1.4.1.11.2.14.11.15.2.75.2.3.1.20,HPN-ICF-DOT11-APMT-MIB::hpnicfDot11APMtChannel,Integer32,accessible-for-notify,,current,,Represents the current channel allocation for radio.
.1.3.6.1.4.1.11.2.14.11.15.2.75.2.3.1.21,HPN-ICF-DOT11-APMT-MIB::hpnicfDot11APMtInterfMacAdd,OCTET,accessible-for-notify,,current,,Represents the MAC address of an AP.
.1.3.6.1.4.1.11.2.14.11.15.2.75.2.3.1.22,HPN-ICF-DOT11-APMT-MIB::hpnicfDot11APMtAdjChannel,Integer32,accessible-for-notify,,current,,Represents the adjacent channel of radio.
.1.3.6.1.4.1.11.2.14.11.15.2.75.2.3.1.23,HPN-ICF-DOT11-APMT-MIB::hpnicfDot11APMtFirstTrapTime,TimeTicks,accessible-for-notify,,current,,Represents the first trap time.
.1.3.6.1.4.1.11.2.14.11.15.2.75.2.3.1.24,HPN-ICF-DOT11-APMT-MIB::hpnicfDot11APMtTrapAPMacAddress,OCTET,accessible-for-notify,,current,,Represents the MAC address of an AP.
.1.3.6.1.4.1.11.2.14.11.15.2.75.3,HPN-ICF-DOT11-STATION-MIB::hpnicfDot11STATION,,,,,,This MIB defines the configuration and statistic information of stations. GLOSSARY IEEE 802.11 Standard to encourage interoperability among wireless networking equipment. Access point (AP) Transmitter/receiver (transceiver) device that commonly connects and transports data between a wireless network and a wired network. Access control (AC) To control and manage multi-APs, it will bridge wireless and wired network. Control And Provisioning of Wireless Access Points Protocol The short name of protocol is CAPWAP. AC will control and manage AP by CAPWAP tunnel protocol defined by IETF. Also, a data tunnel will be set up between AC and AP. BSS IEEE 802.11 Basic Service Set (Radio Cell). The BSS of an AP comprises of the stations directly associated with the AP. station (Client Station) A wireless device in a wireless network associated with an access point. MIC Message Integrity Check. A MIC can, optionally, be added to WEP-encrypted 802.11 frames. SSID Radio Service Set ID. It is used for identification during association. STA (WSTA) A non-AP 802.11 wireless station. WEP Wired Equivalent Privacy. 'WEP' is generally used to refer to 802.11 encryption. RSSI It is the received signal strength indication. It suggests the quality of received signal. RTS Request to Send, it is used to gain control of the medium for the transmission of 'large' frames, in which 'large' is defined by the RTS threshold in the network card driver. CTS Clear to Send, it is used to answer RTS frames. AKM The authentication and key management method defined by 802.11i, and which includes 802.1x and pre-shared key.
.1.3.6.1.4.1.11.2.14.11.15.2.75.3.1,HPN-ICF-DOT11-STATION-MIB::hpnicfDot11StationMtGroup,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.2.75.3.1.1,HPN-ICF-DOT11-STATION-MIB::hpnicfDot11StationAssociateTable,,not-accessible,,current,,This table contains the information of stations which are associating with the wireless network (current AC).
.1.3.6.1.4.1.11.2.14.11.15.2.75.3.1.1.1,HPN-ICF-DOT11-STATION-MIB::hpnicfDot11StationAssociateEntry,,not-accessible,hpnicfDot11StationMAC,current,,Each entry contains association information of each station.
.1.3.6.1.4.1.11.2.14.11.15.2.75.3.1.1.1.1,HPN-ICF-DOT11-STATION-MIB::hpnicfDot11StationMAC,OCTET,not-accessible,,current,,Represents the unique MAC Address of station.
.1.3.6.1.4.1.11.2.14.11.15.2.75.3.1.1.1.2,HPN-ICF-DOT11-STATION-MIB::hpnicfDot11StationIPAddress,IpAddress,read-only,,current,,Represents the IP address of the station.
.1.3.6.1.4.1.11.2.14.11.15.2.75.3.1.1.1.3,HPN-ICF-DOT11-STATION-MIB::hpnicfDot11StationUserName,OCTET,read-only,,current,,Represents the user name of the station.
.1.3.6.1.4.1.11.2.14.11.15.2.75.3.1.1.1.4,HPN-ICF-DOT11-STATION-MIB::hpnicfDot11StationTxRateSet,OCTET,read-only,,current,,Represents the current transmit data rates for this station. Each byte will represent one rate. If the MSB(Most significant bit) is set, then this rate is a mandantory rate. Otherwise, it is optional.
.1.3.6.1.4.1.11.2.14.11.15.2.75.3.1.1.1.5,HPN-ICF-DOT11-STATION-MIB::hpnicfDot11StationUpTime,Unsigned32,read-only,,current,,The time in seconds, how long this station has been associated with this device.
.1.3.6.1.4.1.11.2.14.11.15.2.75.3.1.1.1.6,HPN-ICF-DOT11-STATION-MIB::hpnicfDot11StationSignalStrength,Integer32,read-only,,current,,Represents a device-dependent measure of the signal strength of latest packet received from this station.
.1.3.6.1.4.1.11.2.14.11.15.2.75.3.1.1.1.7,HPN-ICF-DOT11-STATION-MIB::hpnicfDot11StationRSSI,Integer32,read-only,,current,,Represents a device-dependent measure of the RSSI. It is the received signal strength indication. The maximum value is defined by chip set vendors
.1.3.6.1.4.1.11.2.14.11.15.2.75.3.1.1.1.8,HPN-ICF-DOT11-STATION-MIB::hpnicfDot11StationChannel,Integer32,read-only,,current,,Represents current radio channel used by station.
.1.3.6.1.4.1.11.2.14.11.15.2.75.3.1.1.1.9,HPN-ICF-DOT11-STATION-MIB::hpnicfDot11StationPowerSaveMode,INTEGER,read-only,,current,active(1):powersave(2),Represents the power management mode of this station. The following values are supported: active - This station is not in power-save mode and it is actively sending or receiving data. powersave - This station is in power-save mode and it wakes up after sometime to check for buffer data.
.1.3.6.1.4.1.11.2.14.11.15.2.75.3.1.1.1.10,HPN-ICF-DOT11-STATION-MIB::hpnicfDot11StationAid,Integer32,read-only,,current,,Represents the association identification number of station.
.1.3.6.1.4.1.11.2.14.11.15.2.75.3.1.1.1.11,HPN-ICF-DOT11-STATION-MIB::hpnicfDot11StationVlanId,Integer32,read-only,,current,,Represents Vlan ID to which the station is associated.
.1.3.6.1.4.1.11.2.14.11.15.2.75.3.1.1.1.12,HPN-ICF-DOT11-STATION-MIB::hpnicfDot11StationSSIDName,OCTET,read-only,,current,,Represents the ESS name.
.1.3.6.1.4.1.11.2.14.11.15.2.75.3.1.1.1.13,HPN-ICF-DOT11-STATION-MIB::hpnicfDot11StationAuthenMode,INTEGER,read-only,,current,none(1):opensystem(2):sharedkey(3):all(4),Represents the Authentication mode defined by 802.11.
.1.3.6.1.4.1.11.2.14.11.15.2.75.3.1.1.1.14,HPN-ICF-DOT11-STATION-MIB::hpnicfDot11StationAKMMode,INTEGER,read-only,,current,none(1):psk(2):dot1x(3):ext(4),Represents the key management mode defined by 802.11i.
.1.3.6.1.4.1.11.2.14.11.15.2.75.3.1.1.1.15,HPN-ICF-DOT11-STATION-MIB::hpnicfDot11StationSecurityCiphers,INTEGER,read-only,,current,none(1):wep40(2):tkip(4):aesccmp(16):wep104(32):wpisms4(64):wep128(128),Represents the frame encryption cipher type used by station.
.1.3.6.1.4.1.11.2.14.11.15.2.75.3.1.1.1.16,HPN-ICF-DOT11-STATION-MIB::hpnicfDot11StationSSIDEncryptMode,INTEGER,read-only,,current,cleartxt(1):cipher(2):ext(3),Represents the encryption mode for this ESS.
.1.3.6.1.4.1.11.2.14.11.15.2.75.3.1.1.1.17,HPN-ICF-DOT11-STATION-MIB::hpnicfDot11StationRxSNR,Integer32,read-only,,current,,Represents the signal and noise strength ratio of frame reception.
.1.3.6.1.4.1.11.2.14.11.15.2.75.3.1.1.1.18,HPN-ICF-DOT11-STATION-MIB::hpnicfDot11StationTxRate,Integer32,read-only,,current,,Represents the transmission rate of frame.
.1.3.6.1.4.1.11.2.14.11.15.2.75.3.1.1.1.19,HPN-ICF-DOT11-STATION-MIB::hpnicfDot11StationRxRate,Integer32,read-only,,current,,Represents the reception rate of frame.
.1.3.6.1.4.1.11.2.14.11.15.2.75.3.1.1.1.20,HPN-ICF-DOT11-STATION-MIB::hpnicfDot11StationVendorName,OCTET,read-only,,current,,Represents the vendor name of the station.
.1.3.6.1.4.1.11.2.14.11.15.2.75.3.1.1.1.21,HPN-ICF-DOT11-STATION-MIB::hpnicfDot11StationRadioMode,INTEGER,read-only,,current,dot11a(1):dot11b(2):dot11g(4):dot11n(8):dot11gn(16):dot11an(32):dot11ac(64),Represents which radio type supported by the station. The WLAN system support the following possible radio types. dot11a(1), dot11b(2), dot11g(4), dot11n(8) For a station,it could support only one radio type at the same time.
.1.3.6.1.4.1.11.2.14.11.15.2.75.3.1.1.1.22,HPN-ICF-DOT11-STATION-MIB::hpnicfDot11StationRxNoise,Integer32,read-only,,current,,Represents the received noise of the station.
.1.3.6.1.4.1.11.2.14.11.15.2.75.3.1.1.1.23,HPN-ICF-DOT11-STATION-MIB::hpnicfDot11StationMACAddress,OCTET,read-only,,current,,Represents MAC Address of station.
.1.3.6.1.4.1.11.2.14.11.15.2.75.3.1.1.1.24,HPN-ICF-DOT11-STATION-MIB::hpnicfDot11StationTxSpeed,Integer32,read-only,,current,,Represents the bytes of transmitted data frames to the station per second in sample interval.
.1.3.6.1.4.1.11.2.14.11.15.2.75.3.1.1.1.25,HPN-ICF-DOT11-STATION-MIB::hpnicfDot11StationRxSpeed,Integer32,read-only,,current,,Represents the bytes of received data frames from the station per second in sample interval.
.1.3.6.1.4.1.11.2.14.11.15.2.75.3.1.1.1.26,HPN-ICF-DOT11-STATION-MIB::hpnicfDot11StationWmmMode,INTEGER,read-only,,current,wmm(1):nonwmm(2),Represents the QoS mode of station. The following values are supported: wmm - This QoS function is supported by this station. nonwmm - This QoS function is not supported by this station.
.1.3.6.1.4.1.11.2.14.11.15.2.75.3.1.1.1.27,HPN-ICF-DOT11-STATION-MIB::hpnicfDot11StationSecIEStatus,INTEGER,read-only,,current,none(1):rsn(2):wpa(3):all(4):ext(5),Represents the security Information element for this station.
.1.3.6.1.4.1.11.2.14.11.15.2.75.3.1.1.1.28,HPN-ICF-DOT11-STATION-MIB::hpnicfDot11StationUpTimeTicks,TimeTicks,read-only,,current,,Represents how long this station has been associated with this device.
.1.3.6.1.4.1.11.2.14.11.15.2.75.3.1.1.1.29,HPN-ICF-DOT11-STATION-MIB::hpnicfDot11StationRadioMode2,INTEGER,read-only,,current,dot11a(1):dot11b(2):dot11g(4):dot11an(8):dot11gn(16):dot11ac(32),Represents which radio type supported by the station. The WLAN system support the following possible radio types. dot11a(1), dot11b(2), dot11g(4), dot11an(8), dot11gn(16) For a station,it could support only one radio type at the same time.
.1.3.6.1.4.1.11.2.14.11.15.2.75.3.1.1.1.30,HPN-ICF-DOT11-STATION-MIB::hpnicfDot11StationAssTime,OCTET,read-only,,current,,Represents the time at which the station connected.
.1.3.6.1.4.1.11.2.14.11.15.2.75.3.1.1.1.31,HPN-ICF-DOT11-STATION-MIB::hpnicfDot11StationUserAuthType,INTEGER,read-only,,current,portalAuth(1):authFree(2):associateAuth(3):macAuth(4),Represents the type of user authentication with this station. portalAuth - The authentication lunched by portal pop-up program which is need input username and passward,exclude MAC authentication. authFree - There is no need others authentiaction,user will surf internet after association. associateAuth - Include WEP PSK 802.1X authentication. macAuth - MAC Authentication apply with access device, a Remote Authentication Dial-In User Service (RADIUS) server or message netgate to realize fast authentication.
.1.3.6.1.4.1.11.2.14.11.15.2.75.3.1.1.1.32,HPN-ICF-DOT11-STATION-MIB::hpnicfDot11StationRfPingTest,INTEGER,read-write,,current,true(1):false(2),This object is used to start rfping test of the station. It will return false for get operation.
.1.3.6.1.4.1.11.2.14.11.15.2.75.3.1.1.1.33,HPN-ICF-DOT11-STATION-MIB::hpnicfDot11StationMaxRate,Integer32,read-only,,current,,Represents the max negotiation rate of the station.
.1.3.6.1.4.1.11.2.14.11.15.2.75.3.1.1.1.34,HPN-ICF-DOT11-STATION-MIB::hpnicfDot11StationPowerSaveModeCM,INTEGER,read-only,,current,active(0):powersave(1),Represents the power management mode of the client. The following values are supported: active - This client is not in power-save mode and it is actively sending or receiving data. powersave - This client is in power-save mode and it wakes up after some time to check for buffer data.
.1.3.6.1.4.1.11.2.14.11.15.2.75.3.1.1.1.35,HPN-ICF-DOT11-STATION-MIB::hpnicfDot11StationAuthenModeCM,INTEGER,read-only,,current,opensystem(0):sharedkey(1),Represents the authentication mode defined by 802.11. The following values are supported: opensystem - Do not authenticate. sharedkey - System will use challenge message to authenticate the client.
.1.3.6.1.4.1.11.2.14.11.15.2.75.3.1.1.1.36,HPN-ICF-DOT11-STATION-MIB::hpnicfDot11StationAKMModeCM,INTEGER,read-only,,current,none(0):psk(1):radius(2):wlanex(3),Represents the key management mode defined by 802.11i. The following values are supported: none - no key management mode configured, psk - pre-shared key authentication, radius - 802.1x authentication, wlanex - wlanex.
.1.3.6.1.4.1.11.2.14.11.15.2.75.3.1.1.1.37,HPN-ICF-DOT11-STATION-MIB::hpnicfDot11StationSecurityCiphersCM,INTEGER,read-only,,current,none(0):wep40(1):wep104(2):tkip(3):aesccmp(4):wpisms4(5),Represents the frame encryption cipher type used by station. The following values are supported: none - clear text or no cipher method is configure, wep40 - 40-bit WEP key, wep104 - 104-bit WEP key, tkip - WPA Temporal Key encryption, aesccmp - WPA AES CCMP encryption, wpisms4 - ext encryption.
.1.3.6.1.4.1.11.2.14.11.15.2.75.3.1.1.1.38,HPN-ICF-DOT11-STATION-MIB::hpnicfDot11StationSecIEStatusCM,INTEGER,read-only,,current,none(0):wpa(1):wpa2(2):wlanex(3),Represents the security Information element for this station. The following values are supported: none - both wpa and wpa2 are disabled, wpa - only enable wpa, wpa2 - only enable wpa2, wlanex - only enable wlanex.
.1.3.6.1.4.1.11.2.14.11.15.2.75.3.1.2,HPN-ICF-DOT11-STATION-MIB::hpnicfDot11StationAPRelationTable,,not-accessible,,current,,This table contains relation-ship between station, AP, Radio and WLANID, and the detailed information of station is kept in the hpnicfDot11StaAssociateTable table.
.1.3.6.1.4.1.11.2.14.11.15.2.75.3.1.2.1,HPN-ICF-DOT11-STATION-MIB::hpnicfDot11StationAPRelationEntry,,not-accessible,hpnicfDot11StationMAC,current,,Each entry contains relation-ship information with AP, Radio and WLANID of each station.
.1.3.6.1.4.1.11.2.14.11.15.2.75.3.1.2.1.1,HPN-ICF-DOT11-STATION-MIB::hpnicfDot11CurrAPID,OCTET,read-only,,current,,To uniquely identify each AP, and relation-ship between hpnicfDot11CurrAPID and AP device will be static.
.1.3.6.1.4.1.11.2.14.11.15.2.75.3.1.2.1.2,HPN-ICF-DOT11-STATION-MIB::hpnicfDot11CurrRadioID,Integer32,read-only,,current,,Represents each radio.
.1.3.6.1.4.1.11.2.14.11.15.2.75.3.1.2.1.3,HPN-ICF-DOT11-STATION-MIB::hpnicfDot11CurrWlanID,Integer32,read-only,,current,,Represents WLAN ID of the BSS the station associated to.
.1.3.6.1.4.1.11.2.14.11.15.2.75.3.1.2.1.4,HPN-ICF-DOT11-STATION-MIB::hpnicfDot11CurrAntennaID,Integer32,read-only,,current,,Represents Antenna ID of the station associated to.
.1.3.6.1.4.1.11.2.14.11.15.2.75.3.1.3,HPN-ICF-DOT11-STATION-MIB::hpnicfDot11StationStatisTable,,not-accessible,,current,,This table contains statistics and status of all stations in the hpnicfDot11StaAssociateTable.
.1.3.6.1.4.1.11.2.14.11.15.2.75.3.1.3.1,HPN-ICF-DOT11-STATION-MIB::hpnicfDot11StationStatisEntry,,not-accessible,hpnicfDot11StationMAC,current,,This entry contains statistics and status for each station.
.1.3.6.1.4.1.11.2.14.11.15.2.75.3.1.3.1.1,HPN-ICF-DOT11-STATION-MIB::hpnicfDot11StationRxFrameCnt,Counter32,read-only,,current,,Represents the count of frames that are received by AP from station.
.1.3.6.1.4.1.11.2.14.11.15.2.75.3.1.3.1.2,HPN-ICF-DOT11-STATION-MIB::hpnicfDot11StationTxFrameCnt,Counter32,read-only,,current,,Represents the count of frames that are sent to station from AP.
.1.3.6.1.4.1.11.2.14.11.15.2.75.3.1.3.1.3,HPN-ICF-DOT11-STATION-MIB::hpnicfDot11StationDropFrameCnt,Counter32,read-only,,current,,Represents the count of frames that are dropped.
.1.3.6.1.4.1.11.2.14.11.15.2.75.3.1.3.1.4,HPN-ICF-DOT11-STATION-MIB::hpnicfDot11StationRxFrameBytes,Counter64,read-only,,current,,Represents the count of bytes that are received by AP from station.
.1.3.6.1.4.1.11.2.14.11.15.2.75.3.1.3.1.5,HPN-ICF-DOT11-STATION-MIB::hpnicfDot11StationTxFrameBytes,Counter64,read-only,,current,,Represents the count of bytes that are sent to station from AP.
.1.3.6.1.4.1.11.2.14.11.15.2.75.3.1.3.1.6,HPN-ICF-DOT11-STATION-MIB::hpnicfDot11StationDropFrameBytes,Counter64,read-only,,current,,Represents how many bytes are dropped.
.1.3.6.1.4.1.11.2.14.11.15.2.75.3.1.3.1.7,HPN-ICF-DOT11-STATION-MIB::hpnicfDot11StationRxRetryPkts,Counter32,read-only,,current,,Represents the count of frames that are retransmitted to AP from station.
.1.3.6.1.4.1.11.2.14.11.15.2.75.3.1.3.1.8,HPN-ICF-DOT11-STATION-MIB::hpnicfDot11StationTxRetryPkts,Counter32,read-only,,current,,Represents the count of frames that are retransmitted to station from AP.
.1.3.6.1.4.1.11.2.14.11.15.2.75.3.1.3.1.9,HPN-ICF-DOT11-STATION-MIB::hpnicfDot11StationRxRetryBytes,Counter64,read-only,,current,,Represents the count of bytes that are retransmitted to AP from station.
.1.3.6.1.4.1.11.2.14.11.15.2.75.3.1.3.1.10,HPN-ICF-DOT11-STATION-MIB::hpnicfDot11StationTxRetryBytes,Counter64,read-only,,current,,Represents the count of bytes that are retransmitted to station from AP.
.1.3.6.1.4.1.11.2.14.11.15.2.75.3.1.3.1.11,HPN-ICF-DOT11-STATION-MIB::hpnicfDot11StationThroughput,Counter64,read-only,,current,,Represents how many payload bytes of data frame are sent and received by station.
.1.3.6.1.4.1.11.2.14.11.15.2.75.3.1.3.1.12,HPN-ICF-DOT11-STATION-MIB::hpnicfDot11StationSuccessTxCnt,Counter32,read-only,,current,,Represents how many frames have been successfully sent to station.
.1.3.6.1.4.1.11.2.14.11.15.2.75.3.1.3.1.13,HPN-ICF-DOT11-STATION-MIB::hpnicfDot11StationSuccessTxDataCnt,Counter32,read-only,,current,,Represents how many data frames have been successfully sent to station.
.1.3.6.1.4.1.11.2.14.11.15.2.75.3.1.3.1.14,HPN-ICF-DOT11-STATION-MIB::hpnicfDot11StationRxDataFrameCnt,Counter32,read-only,,current,,Represents how many data frames have been received from station.
.1.3.6.1.4.1.11.2.14.11.15.2.75.3.1.3.1.15,HPN-ICF-DOT11-STATION-MIB::hpnicfDot11StationTxDataFrameCnt,Counter32,read-only,,current,,Represents how many data frames have been sent to station.
.1.3.6.1.4.1.11.2.14.11.15.2.75.3.1.3.1.16,HPN-ICF-DOT11-STATION-MIB::hpnicfDot11StationRxDataFrameBytes,Counter64,read-only,,current,,Represents how many bytes of data frames have been received from station.
.1.3.6.1.4.1.11.2.14.11.15.2.75.3.1.3.1.17,HPN-ICF-DOT11-STATION-MIB::hpnicfDot11StationTxDataFrameBytes,Counter64,read-only,,current,,Represents how many bytes of data frames have been sent to station.
.1.3.6.1.4.1.11.2.14.11.15.2.75.3.1.3.1.18,HPN-ICF-DOT11-STATION-MIB::hpnicfDot11StationRxFragCnt,Counter32,read-only,,current,,Represents the number of fragmented data frames that received from station.
.1.3.6.1.4.1.11.2.14.11.15.2.75.3.1.3.1.19,HPN-ICF-DOT11-STATION-MIB::hpnicfDot11StaRxErrDataFrameCnt,Counter64,read-only,,current,,Represents the count of error data frames that are received by AP from station.
.1.3.6.1.4.1.11.2.14.11.15.2.75.3.1.3.1.20,HPN-ICF-DOT11-STATION-MIB::hpnicfDot11StaTxRetryDataFrameCnt,Counter64,read-only,,current,,Represents the count of data frames that are retransmitted to station from AP.
.1.3.6.1.4.1.11.2.14.11.15.2.75.3.1.3.1.21,HPN-ICF-DOT11-STATION-MIB::hpnicfDot11StaTxDataRatePkts,OCTET,read-only,,current,,Represents how many data frames of each rate have been received from station.
.1.3.6.1.4.1.11.2.14.11.15.2.75.3.1.3.1.22,HPN-ICF-DOT11-STATION-MIB::hpnicfDot11StaRxDataRatePkts,OCTET,read-only,,current,,Represents how many data frames of each rate have been sent to station.
.1.3.6.1.4.1.11.2.14.11.15.2.75.3.1.3.1.23,HPN-ICF-DOT11-STATION-MIB::hpnicfDot11StaTxSignalStrengthPkts,OCTET,read-only,,current,,Represents how many data frames of different signal strength have been received from station.
.1.3.6.1.4.1.11.2.14.11.15.2.75.3.1.4,HPN-ICF-DOT11-STATION-MIB::hpnicfDot11StationRfPingTable,,not-accessible,,current,,This table contains statistics of all stations in the hpnicfDot11StationRfPingTable.
.1.3.6.1.4.1.11.2.14.11.15.2.75.3.1.4.1,HPN-ICF-DOT11-STATION-MIB::hpnicfDot11StationRfPingEntry,,not-accessible,hpnicfDot11StationMAC:hpnicfDot11StationRfPingIndex,current,,This entry contains statistics for each station's RfPing results.
.1.3.6.1.4.1.11.2.14.11.15.2.75.3.1.4.1.1,HPN-ICF-DOT11-STATION-MIB::hpnicfDot11StationRfPingIndex,Integer32,not-accessible,,current,,Represents the rate index for the station.
.1.3.6.1.4.1.11.2.14.11.15.2.75.3.1.4.1.2,HPN-ICF-DOT11-STATION-MIB::hpnicfDot11StationRfPingRate,OCTET,read-only,,current,,Represents the rate at which the radio interface sends wireless ping frames.
.1.3.6.1.4.1.11.2.14.11.15.2.75.3.1.4.1.3,HPN-ICF-DOT11-STATION-MIB::hpnicfDot11StationRfPingTxCnt,Integer32,read-only,,current,,Represents the number of wireless ping frames that the radio interface sent.
.1.3.6.1.4.1.11.2.14.11.15.2.75.3.1.4.1.4,HPN-ICF-DOT11-STATION-MIB::hpnicfDot11StationRfPingRxCnt,Integer32,read-only,,current,,Represents the number of wireless ping frames that the radio interface received from the client.
.1.3.6.1.4.1.11.2.14.11.15.2.75.3.1.4.1.5,HPN-ICF-DOT11-STATION-MIB::hpnicfDot11StationRfPingRssi,Integer32,read-only,,current,,Represents the client signal strength detected by the AP.
.1.3.6.1.4.1.11.2.14.11.15.2.75.3.1.4.1.6,HPN-ICF-DOT11-STATION-MIB::hpnicfDot11StationRfPingRetries,Integer32,read-only,,current,,Represents the total number of retransmitted ping frames.
.1.3.6.1.4.1.11.2.14.11.15.2.75.3.1.4.1.7,HPN-ICF-DOT11-STATION-MIB::hpnicfDot11StationRfPingRtt,Integer32,read-only,,current,,Round-trip time (RTT) from the time when the radio interface send a ping packet to the time when it receives a response from the client.
.1.3.6.1.4.1.11.2.14.11.15.2.75.3.2,HPN-ICF-DOT11-STATION-MIB::hpnicfDot11StationNotifyGroup,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.2.75.3.2.0,HPN-ICF-DOT11-STATION-MIB::hpnicfDot11StationTraps,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.2.75.3.2.0.1,HPN-ICF-DOT11-STATION-MIB::hpnicfDot11StationMICErrorTrap,,,,,,This notification is to indicate the occurrence of a MIC failure in a certain station.
.1.3.6.1.4.1.11.2.14.11.15.2.75.3.2.0.2,HPN-ICF-DOT11-STATION-MIB::hpnicfDot11StationAuthenErrorTrap,,,,,,This notification is to indicate which station happened authentication failure.
.1.3.6.1.4.1.11.2.14.11.15.2.75.3.2.0.3,HPN-ICF-DOT11-STATION-MIB::hpnicfDot11StationAuthorFailTrap,,,,,,This trap is sent if a station authorization fails.
.1.3.6.1.4.1.11.2.14.11.15.2.75.3.2.0.4,HPN-ICF-DOT11-STATION-MIB::hpnicfDot11StationAssocFailTrap,,,,,,This trap is sent if a station association fails.
.1.3.6.1.4.1.11.2.14.11.15.2.75.3.2.0.5,HPN-ICF-DOT11-STATION-MIB::hpnicfDot11StationDeAssocTrap,,,,,,This trap is sent if a station de-association occurred.
.1.3.6.1.4.1.11.2.14.11.15.2.75.3.2.0.6,HPN-ICF-DOT11-STATION-MIB::hpnicfDot11StationAuthorSuccTrap,,,,,,This trap is sent when a station is authorized successfully.
.1.3.6.1.4.1.11.2.14.11.15.2.75.3.2.0.7,HPN-ICF-DOT11-STATION-MIB::hpnicfDot11StationRoamingTrap,,,,,,This trap is sent when a station roamed successfully.
.1.3.6.1.4.1.11.2.14.11.15.2.75.3.2.0.8,HPN-ICF-DOT11-STATION-MIB::hpnicfDot11StationDisconnectTrap,,,,,,This notification is sent when station disconnects with AP.
.1.3.6.1.4.1.11.2.14.11.15.2.75.3.2.0.9,HPN-ICF-DOT11-STATION-MIB::hpnicfDot11UserDisconnectTrap,,,,,,This notification is sent when user disconnects with AP.
.1.3.6.1.4.1.11.2.14.11.15.2.75.3.2.1,HPN-ICF-DOT11-STATION-MIB::hpnicfDot11StationTrapVarObjects,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.2.75.3.2.1.1,HPN-ICF-DOT11-STATION-MIB::hpnicfDot11StationTrapBSSID,OCTET,accessible-for-notify,,current,,Represents on which BSSID of AP the event happened.
.1.3.6.1.4.1.11.2.14.11.15.2.75.3.2.1.2,HPN-ICF-DOT11-STATION-MIB::hpnicfDot11StationTrapStaMAC,OCTET,accessible-for-notify,,current,,Represents the MAC address of station which happened message integrity check (MIC) errors.
.1.3.6.1.4.1.11.2.14.11.15.2.75.3.2.1.3,HPN-ICF-DOT11-STATION-MIB::hpnicfDot11StationSessionStartTime,OCTET,accessible-for-notify,,current,,Represents the time at which the station connected.
.1.3.6.1.4.1.11.2.14.11.15.2.75.3.2.1.4,HPN-ICF-DOT11-STATION-MIB::hpnicfDot11StationAssocFailCause,INTEGER,accessible-for-notify,,current,unknownfailure(1):toomanyassoc(2):invalidie(3):unsupportedrate(4):unsupportedpwrcap(5):unsupportedcap(6),Represents the cause of the station association failure.
.1.3.6.1.4.1.11.2.14.11.15.2.75.3.2.1.5,HPN-ICF-DOT11-STATION-MIB::hpnicfDot11StationAuthorFailCause,INTEGER,accessible-for-notify,,current,unknownfailure(1):invalidie(2):rsnieversionunsupported(3):wpaieversionunsupported(4):groupcipherinvalid(5):pairwisecipherinvalid(6):akminvalid(7),Represents the cause of the station authorization failure.
.1.3.6.1.4.1.11.2.14.11.15.2.75.3.2.1.6,HPN-ICF-DOT11-STATION-MIB::hpnicfDot11StationFailCauseDesc,OCTET,accessible-for-notify,,current,,Represents the failure description of the station.
.1.3.6.1.4.1.11.2.14.11.15.2.75.3.2.1.7,HPN-ICF-DOT11-STATION-MIB::hpnicfDot11StationSessionDuration,Unsigned32,accessible-for-notify,,current,,Represents the duration of the station sesssion.
.1.3.6.1.4.1.11.2.14.11.15.2.75.3.2.1.8,HPN-ICF-DOT11-STATION-MIB::hpnicfDot11StationRoamingTime,Unsigned32,accessible-for-notify,,current,,Represents the time at which the station roamed.
.1.3.6.1.4.1.11.2.14.11.15.2.75.3.2.1.9,HPN-ICF-DOT11-STATION-MIB::hpnicfDot11StationACIPAddress,IpAddress,accessible-for-notify,,current,,For roam-in station, it represents the ip address of home AC. For roam-out station, it represents the ip address of foreign AC.
.1.3.6.1.4.1.11.2.14.11.15.2.75.3.2.1.10,HPN-ICF-DOT11-STATION-MIB::hpnicfDot11StationAPName,OCTET,accessible-for-notify,,current,,Name of the AP which the station connects to.
.1.3.6.1.4.1.11.2.14.11.15.2.75.3.2.1.11,HPN-ICF-DOT11-STATION-MIB::hpnicfDot11StationBSSID,OCTET,accessible-for-notify,,current,,BSSID which the station connects to.
.1.3.6.1.4.1.11.2.14.11.15.2.75.3.2.1.12,HPN-ICF-DOT11-STATION-MIB::hpnicfDot11StaDisconnectReason,OCTET,accessible-for-notify,,current,,Reason why the station disconnects with the AP.
.1.3.6.1.4.1.11.2.14.11.15.2.75.3.2.1.13,HPN-ICF-DOT11-STATION-MIB::hpnicfDot11StationAuthMode,INTEGER,accessible-for-notify,,current,opensystem(1):sharedkey(2),Represents station's authentication mode.
.1.3.6.1.4.1.11.2.14.11.15.2.75.3.2.1.14,HPN-ICF-DOT11-STATION-MIB::hpnicfDot11StationACIPv6Add,OCTET,accessible-for-notify,,current,,For roam-in station, it represents the IPv6 address of home AC. For roam-out station, it represents the IPv6 address of foreign AC.
.1.3.6.1.4.1.11.2.14.11.15.2.75.3.2.1.15,HPN-ICF-DOT11-STATION-MIB::hpnicfDot11UserName,OCTET,accessible-for-notify,,current,,Represents the user name.
.1.3.6.1.4.1.11.2.14.11.15.2.75.3.2.1.16,HPN-ICF-DOT11-STATION-MIB::hpnicfDot11StationTrapAPMacAddress,OCTET,accessible-for-notify,,current,,Represents the MAC address of an AP.
.1.3.6.1.4.1.11.2.14.11.15.2.75.4,HPN-ICF-DOT11-CFG-MIB::hpnicfDot11CFG,,,,,,This MIB provides information about WLAN configuration. GLOSSARY IEEE 802.11 Standard to encourage interoperability among wireless networking equipment. Access point (AP) Transmitter/receiver (transceiver) device that commonly connects and transports data between a wireless network and a wired network. Access control (AC) To control and manage multi-APs, it will bridge wireless and wired network. Fat AP Applied in the home, SOHO and so on, and it could work independently without help from AC. Fit AP Applied in the enterprise environment, it will work under the control and management from AC. Control And Provisioning of Wireless Access Points Protocol The short name of protocol is CAPWAP. AC will control and manage AP by CAPWAP tunnel protocol defined by IETF. Also, a data tunnel will be set up between AC and AP. BSS IEEE 802.11 Basic Service Set (Radio Cell). The BSS of an AP comprises of the stations directly associating with the AP. Radio The chip set to receive and send wireless signal. Association The service used to establish access point or station mapping and enable station invocation of the distribution system services. (Wireless clients attempt to connect to access points.) Basic Rate A data rate that is mandatory for client devices to support in order for them to achieve successful association. MSDU MAC Service Data Unit, it is frame format defined by 802.11. TU It is 1,024 microseconds (ms), which is about 1 millisecond. AKM The authentication and key management method defined by 802.11i, and which includes 802.1x and pre-shared key.
.1.3.6.1.4.1.11.2.14.11.15.2.75.4.1,HPN-ICF-DOT11-CFG-MIB::hpnicfDot11GlobeConfigGroup,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.2.75.4.1.1,HPN-ICF-DOT11-CFG-MIB::hpnicfDot11GlobalCountryCode,OCTET,read-write,,current,,Represents the country code for wireless network.
.1.3.6.1.4.1.11.2.14.11.15.2.75.4.1.2,HPN-ICF-DOT11-CFG-MIB::hpnicfDot11StaKeepALiveTimerIntvl,Unsigned32,read-write,,current,,Represents the interval of the keep alive requests sent between AP and STA. Default value 0 : The keep alive function is disabled.
.1.3.6.1.4.1.11.2.14.11.15.2.75.4.1.3,HPN-ICF-DOT11-CFG-MIB::hpnicfDot11StaIdleTimerIntvl,Integer32,read-write,,current,,Represents the interval for which the link between AP and STA ( power-save or awake ) can be idle.
.1.3.6.1.4.1.11.2.14.11.15.2.75.4.1.4,HPN-ICF-DOT11-CFG-MIB::hpnicfDot11BroadcastProbeReply,INTEGER,read-write,,current,true(1):false(2),Represents enable the AP to reply broadcast probe or not. 'true' : The AP to reply broadcast probe is enabled. 'false': The AP to reply broadcast probe is disabled
.1.3.6.1.4.1.11.2.14.11.15.2.75.4.1.5,HPN-ICF-DOT11-CFG-MIB::hpnicfDot11APScanMode,INTEGER,read-write,,current,active(1):passive(2),Represents the scanning mode for AP. The following values are supported: active - AP will actively do scan. passive - AP will passively do scan.
.1.3.6.1.4.1.11.2.14.11.15.2.75.4.1.6,HPN-ICF-DOT11-CFG-MIB::hpnicfDot11ACCtrlTunnelSecSupport,INTEGER,read-write,,current,cleartxt(1):dtls(2):ipsec(3),Represents what security schemes are supported for CAPWAP Control tunnel.
.1.3.6.1.4.1.11.2.14.11.15.2.75.4.1.7,HPN-ICF-DOT11-CFG-MIB::hpnicfDot11ACDataTunnelSecSupport,INTEGER,read-write,,current,cleartxt(1):dtls(2):ipsec(3),Represents what security schemes are supported for CAPWAP data tunnel. The cleartxt is the default scheme.
.1.3.6.1.4.1.11.2.14.11.15.2.75.4.1.8,HPN-ICF-DOT11-CFG-MIB::hpnicfDot11ACAutoAPSupport,INTEGER,read-write,,current,true(1):false(2),Represents enable the auto AP functionality or not. 'true' : The auto AP functionality is enabled. 'false': The auto AP functionality is disabled
.1.3.6.1.4.1.11.2.14.11.15.2.75.4.1.9,HPN-ICF-DOT11-CFG-MIB::hpnicfDot11AutoAPName,OCTET,read-write,,current,,Represents the name of auto AP that needs to be made persistent. When read the value from the node, NULL value be returned.
.1.3.6.1.4.1.11.2.14.11.15.2.75.4.1.10,HPN-ICF-DOT11-CFG-MIB::hpnicfDot11PersistentName,OCTET,read-write,,current,,Represents the new name of auto AP after being made persistent. When read the value from the node, NULL value be returned.
.1.3.6.1.4.1.11.2.14.11.15.2.75.4.1.11,HPN-ICF-DOT11-CFG-MIB::hpnicfDot11IntfTrapThreshold,Integer32,read-write,,current,,Represents threshold of interference trap. If signal strength of the device exceeds this threshold, corresponding trap will be sent.
.1.3.6.1.4.1.11.2.14.11.15.2.75.4.1.12,HPN-ICF-DOT11-CFG-MIB::hpnicfDot11MonitorInterval,Unsigned32,read-write,,current,,Represents the monitoring interval. Default value 0 : The monitoring functionality is changed to real-time mode.
.1.3.6.1.4.1.11.2.14.11.15.2.75.4.1.13,HPN-ICF-DOT11-CFG-MIB::hpnicfDot11SampleInterval,Unsigned32,read-write,,current,,Represents the sampling interval. Default value 0 : The sampling functionality is disabled.
.1.3.6.1.4.1.11.2.14.11.15.2.75.4.1.14,HPN-ICF-DOT11-CFG-MIB::hpnicfDot11ChnlSwitChkInterval,Unsigned32,read-write,,current,,Represents the checking interval of channel switch.
.1.3.6.1.4.1.11.2.14.11.15.2.75.4.1.15,HPN-ICF-DOT11-CFG-MIB::hpnicfDot11APUserUplimit,Unsigned32,read-write,,current,,Represents the upper limit of user which has access to this AP.
.1.3.6.1.4.1.11.2.14.11.15.2.75.4.1.16,HPN-ICF-DOT11-CFG-MIB::hpnicfDot11APL2IsolateEnable,INTEGER,read-write,,current,true(1):false(2),Represents enable the layer2 isolation or not. 'true' : The layer2 isolation functionality is enabled. 'false': The layer2 isolation functionality is disabled.
.1.3.6.1.4.1.11.2.14.11.15.2.75.4.1.17,HPN-ICF-DOT11-CFG-MIB::hpnicfDot11APBSSIDSupportNum,Integer32,read-only,,current,,Represents the max number of BSSID supported by Current AP.
.1.3.6.1.4.1.11.2.14.11.15.2.75.4.1.18,HPN-ICF-DOT11-CFG-MIB::hpnicfDot11APLastUpdateStatTime,OCTET,read-only,,current,,Represents date and time update statistic information lately.
.1.3.6.1.4.1.11.2.14.11.15.2.75.4.1.19,HPN-ICF-DOT11-CFG-MIB::hpnicfDot11APDoSProtectEnable,INTEGER,read-write,,current,true(1):false(2),Represents enable the DOS protection or not. 'true' : The DOS protection functionality is enabled. 'false': The DOS protection functionality is disabled.
.1.3.6.1.4.1.11.2.14.11.15.2.75.4.1.20,HPN-ICF-DOT11-CFG-MIB::hpnicfDot11MaxAPPerIf,Unsigned32,read-write,,current,,Represents max AP number that can be connected to AC interface.
.1.3.6.1.4.1.11.2.14.11.15.2.75.4.1.21,HPN-ICF-DOT11-CFG-MIB::hpnicfDot11SampleTimeStamp,OCTET,read-only,,current,,Represents the start time of current sample period.
.1.3.6.1.4.1.11.2.14.11.15.2.75.4.1.22,HPN-ICF-DOT11-CFG-MIB::hpnicfDot11UplinkTrackId,Unsigned32,read-write,,current,,Represents the track id of AP. Default value 0 : The uplink track function for AP is disabled.
.1.3.6.1.4.1.11.2.14.11.15.2.75.4.1.23,HPN-ICF-DOT11-CFG-MIB::hpnicfDot11RtCollectSwitch,INTEGER,read-write,,current,true(1):false(2),This object is used to turn on/off real-time statistics collection between AC and AP. If the value is true, hpnicfDot11RtCollectIntvl will take effect. Otherwise, hpnicfDot11RglCollectIntvl will take effect.
.1.3.6.1.4.1.11.2.14.11.15.2.75.4.1.24,HPN-ICF-DOT11-CFG-MIB::hpnicfDot11RglCollectIntvl,Integer32,read-write,,current,,This object represents interval to regularly collect statistics from AC to AP.
.1.3.6.1.4.1.11.2.14.11.15.2.75.4.1.25,HPN-ICF-DOT11-CFG-MIB::hpnicfDot11RtCollectIntvl,Integer32,read-write,,current,,This object represents interval to collect real-time statistics from AC to AP.
.1.3.6.1.4.1.11.2.14.11.15.2.75.4.1.26,HPN-ICF-DOT11-CFG-MIB::hpnicfDot11AllAPCpuUsageThreshold,Integer32,read-write,,current,,The CPU usage threshold for all AP.
.1.3.6.1.4.1.11.2.14.11.15.2.75.4.1.27,HPN-ICF-DOT11-CFG-MIB::hpnicfDot11AllAPMemUsageThreshold,Integer32,read-write,,current,,The memory usage threshold for all AP.
.1.3.6.1.4.1.11.2.14.11.15.2.75.4.1.28,HPN-ICF-DOT11-CFG-MIB::hpnicfDot11AdjIntfTrapThreshold,Integer32,read-write,,current,,Represents threshold of adjacent interference trap. If signal strength of the device exceeds this threshold, corresponding trap will be sent.
.1.3.6.1.4.1.11.2.14.11.15.2.75.4.1.29,HPN-ICF-DOT11-CFG-MIB::hpnicfDot11AllAPMonitorMode,INTEGER,read-write,,current,normal(1):monitor(2):hybrid(3),Represents what work mode for All AP. The following values are supported: normal, - AP will supply WLAN service. monitor - AP will be a monitor to find attack. hybrid - AP will supply WLAN service and Device detection is enabled.
.1.3.6.1.4.1.11.2.14.11.15.2.75.4.1.30,HPN-ICF-DOT11-CFG-MIB::hpnicfDot11GlobalApFmwUpdState,INTEGER,read-write,,current,enable(1):disable(2),Represents the status of version auto-update for an AP. The following values are supported: enable - AP version will be updated automatically. disable - AP version will not be updated automatically.
.1.3.6.1.4.1.11.2.14.11.15.2.75.4.1.31,HPN-ICF-DOT11-CFG-MIB::hpnicfDot11ACNasIDCM,OCTET,read-write,,current,,Represents the NAS-ID of current AC.
.1.3.6.1.4.1.11.2.14.11.15.2.75.4.2,HPN-ICF-DOT11-CFG-MIB::hpnicfDot11PolicyConfigGroup,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.2.75.4.2.1,HPN-ICF-DOT11-CFG-MIB::hpnicfDot11RadioPolicyTable,,not-accessible,,current,,The table defines the parameters for radio policy, as per radio policy of CLI. One radio policy could be assigned to the different radios (AP).
.1.3.6.1.4.1.11.2.14.11.15.2.75.4.2.1.1,HPN-ICF-DOT11-CFG-MIB::hpnicfDot11RadioPolicyEntry,,not-accessible,IMPLIEDhpnicfDot11RadioPolicyName,current,,Each entry contains information of each radio policy.
.1.3.6.1.4.1.11.2.14.11.15.2.75.4.2.1.1.1,HPN-ICF-DOT11-CFG-MIB::hpnicfDot11RadioPolicyName,OCTET,not-accessible,,current,,Represents the name of radio policy.
.1.3.6.1.4.1.11.2.14.11.15.2.75.4.2.1.1.2,HPN-ICF-DOT11-CFG-MIB::hpnicfDot11BeaconInterval,Integer32,read-create,,current,,Represents the interval for Beacon management frame.
.1.3.6.1.4.1.11.2.14.11.15.2.75.4.2.1.1.3,HPN-ICF-DOT11-CFG-MIB::hpnicfDot11DtimInterval,Integer32,read-create,,current,,Represents the number of beacon intervals that shall elapse between transmission of Beacons frames containing a Traffic Indication Map (TIM) element whose DTIM Count field is 0. This value is transmitted in the Delivery TIM (DTIM) Period field of Beacon frames.
.1.3.6.1.4.1.11.2.14.11.15.2.75.4.2.1.1.4,HPN-ICF-DOT11-CFG-MIB::hpnicfDot11RtsThreshold,Integer32,read-create,,current,,Represents the current minimum size, in octets, of the MAC protocol data unit (MPDU), below which a Request to send/Clear to send (RTS/CTS) handshake shall not be performed.
.1.3.6.1.4.1.11.2.14.11.15.2.75.4.2.1.1.5,HPN-ICF-DOT11-CFG-MIB::hpnicfDot11FragThreshold,Integer32,read-create,,current,,Represents the current maximum size, in octets, of the MPDU that may be delivered to the PHY. A MSDU shall be broken into fragments if its size exceeds the value of this attribute after adding MAC headers and trailers.
.1.3.6.1.4.1.11.2.14.11.15.2.75.4.2.1.1.6,HPN-ICF-DOT11-CFG-MIB::hpnicfDot11ShortRetryThreshold,Integer32,read-create,,current,,Represents the maximum number of transmission attempts of a frame, the length of which is less than or equal to hpnicfDot11RTSThreshold, which shall be made before a failure condition is indicated.
.1.3.6.1.4.1.11.2.14.11.15.2.75.4.2.1.1.7,HPN-ICF-DOT11-CFG-MIB::hpnicfDot11LongRetryThreshold,Integer32,read-create,,current,,Represents the maximum number of transmission attempts of a frame, the length of which is longer than hpnicfDot11RTSThreshold, that shall be made before a failure condition is indicated.
.1.3.6.1.4.1.11.2.14.11.15.2.75.4.2.1.1.8,HPN-ICF-DOT11-CFG-MIB::hpnicfDot11MaxRxLifetime,Unsigned32,read-create,,current,,Represents the elapsed time. After the time specified by hpnicfDot11MaxRxLifetime, the further attempts to reassemble the MSDU shall be terminated.
.1.3.6.1.4.1.11.2.14.11.15.2.75.4.2.1.1.9,HPN-ICF-DOT11-CFG-MIB::hpnicfDot11RdoPolicyRowStatus,INTEGER,read-create,,current,active(1):notInService(2):notReady(3):createAndGo(4):createAndWait(5):destroy(6),The status of this table entry.
.1.3.6.1.4.1.11.2.14.11.15.2.75.4.2.1.1.10,HPN-ICF-DOT11-CFG-MIB::hpnicfDot11RdoClientMaxCount,Integer32,read-create,,current,,Represent the maximum number of stations supported by this radio policy.
.1.3.6.1.4.1.11.2.14.11.15.2.75.4.2.1.1.11,HPN-ICF-DOT11-CFG-MIB::hpnicfDot11BeaconIntervalMs,Integer32,read-create,,current,,Represents the interval for Beacon management frame.
.1.3.6.1.4.1.11.2.14.11.15.2.75.4.2.2,HPN-ICF-DOT11-CFG-MIB::hpnicfDot11ServicePolicyTable,,not-accessible,,current,,The table defines the parameters for ESS, as per service policy of CLI. One service policy could be assigned to the different radios (AP).
.1.3.6.1.4.1.11.2.14.11.15.2.75.4.2.2.1,HPN-ICF-DOT11-CFG-MIB::hpnicfDot11ServicePolicyEntry,,not-accessible,hpnicfDot11ServicePolicyID,current,,Each entry contains information of each service policy.
.1.3.6.1.4.1.11.2.14.11.15.2.75.4.2.2.1.1,HPN-ICF-DOT11-CFG-MIB::hpnicfDot11ServicePolicyID,Integer32,not-accessible,,current,,Represents the ID of each service policy.
.1.3.6.1.4.1.11.2.14.11.15.2.75.4.2.2.1.2,HPN-ICF-DOT11-CFG-MIB::hpnicfDot11SSIDName,OCTET,read-create,,current,,Represents the ESS. As per CLI, the value of service policy name will be SSID.
.1.3.6.1.4.1.11.2.14.11.15.2.75.4.2.2.1.3,HPN-ICF-DOT11-CFG-MIB::hpnicfDot11SSIDHidden,INTEGER,read-create,,current,true(1):false(2),This attribute controls whether the SSID will be advertised in the beacon frame. If it is true, then SSID will not be advertised in the beacon frame.
.1.3.6.1.4.1.11.2.14.11.15.2.75.4.2.2.1.4,HPN-ICF-DOT11-CFG-MIB::hpnicfDot11AuthenMode,INTEGER,read-create,,current,none(1):opensystem(2):sharedkey(3):all(4),Represents the Authentication mode defined by 802.11.
.1.3.6.1.4.1.11.2.14.11.15.2.75.4.2.2.1.5,HPN-ICF-DOT11-CFG-MIB::hpnicfDot11SSIDEncryptionMode,INTEGER,read-create,,current,cleartxt(1):cipher(2):ext(3),Represents the encryption mode for this ESS.
.1.3.6.1.4.1.11.2.14.11.15.2.75.4.2.2.1.6,HPN-ICF-DOT11-CFG-MIB::hpnicfDot11WlanInfBindingType,OCTET,read-create,,current,,Represents the service policy will bind to what kind of data forwarding interface.
.1.3.6.1.4.1.11.2.14.11.15.2.75.4.2.2.1.7,HPN-ICF-DOT11-CFG-MIB::hpnicfDot11WlanInfBindingID,Integer32,read-create,,current,,Represents the interface ID of the interface that ESS will bind to. If the value is set to -1, the binding will be removed.
.1.3.6.1.4.1.11.2.14.11.15.2.75.4.2.2.1.8,HPN-ICF-DOT11-CFG-MIB::hpnicfDot11SrvPolicyRowStatus,INTEGER,read-create,,current,active(1):notInService(2):notReady(3):createAndGo(4):createAndWait(5):destroy(6),The status of this table entry.
.1.3.6.1.4.1.11.2.14.11.15.2.75.4.2.2.1.9,HPN-ICF-DOT11-CFG-MIB::hpnicfDot11ClientMaxCount,Integer32,read-create,,current,,Represent the maximum number of stations supported by this service policy.
.1.3.6.1.4.1.11.2.14.11.15.2.75.4.2.2.1.10,HPN-ICF-DOT11-CFG-MIB::hpnicfDot11SPInCirMode,INTEGER,read-create,,current,static(1):dynamic(2), CIR(committed information rate) mode of inbound direction. This object is useful only when the corresponding CIR is nonzero. If value of this object is changed, corresponding CIR will be reset.
.1.3.6.1.4.1.11.2.14.11.15.2.75.4.2.2.1.11,HPN-ICF-DOT11-CFG-MIB::hpnicfDot11SPInCirValue,Integer32,read-create,,current,,Represents the CIR of inbound direction of this service policy. If the value is 0, it means that no flow control is applied to the service policy, and the corresponding CIR mode is meaningless.
.1.3.6.1.4.1.11.2.14.11.15.2.75.4.2.2.1.12,HPN-ICF-DOT11-CFG-MIB::hpnicfDot11SPOutCirMode,INTEGER,read-create,,current,static(1):dynamic(2), CIR(committed information rate) mode of outbound direction. This object is useful only when the corresponding CIR is nonzero. If value of this object is changed, corresponding CIR will be reset.
.1.3.6.1.4.1.11.2.14.11.15.2.75.4.2.2.1.13,HPN-ICF-DOT11-CFG-MIB::hpnicfDot11SPOutCirValue,Integer32,read-create,,current,,Represents the CIR of outbound direction of this service policy. If the value is 0, it means that no flow control is applied to the service policy, and the corresponding CIR mode is meaningless.
.1.3.6.1.4.1.11.2.14.11.15.2.75.4.2.2.1.14,HPN-ICF-DOT11-CFG-MIB::hpnicfDot11WlanInfPVID,Integer32,read-create,,current,,Represents the VLAN ID of SSID.
.1.3.6.1.4.1.11.2.14.11.15.2.75.4.2.2.1.15,HPN-ICF-DOT11-CFG-MIB::hpnicfDot11SPInCirStaticValue,Integer32,read-create,,current,,Represents the CIR of inbound direction for static CIR mode.
.1.3.6.1.4.1.11.2.14.11.15.2.75.4.2.2.1.16,HPN-ICF-DOT11-CFG-MIB::hpnicfDot11SPOutCirStaticValue,Integer32,read-create,,current,,Represents the CIR of outbound direction for static CIR mode.
.1.3.6.1.4.1.11.2.14.11.15.2.75.4.2.2.1.17,HPN-ICF-DOT11-CFG-MIB::hpnicfDot11SPIsolate,INTEGER,read-create,,current,true(1):false(2),If it is true, then stations connected with the service policy are isolated.
.1.3.6.1.4.1.11.2.14.11.15.2.75.4.2.2.1.18,HPN-ICF-DOT11-CFG-MIB::hpnicfDot11WlanexAuthServerIP,IpAddress,read-create,,current,,Represents the IP address of the Wlanex Authentication server
.1.3.6.1.4.1.11.2.14.11.15.2.75.4.2.2.1.19,HPN-ICF-DOT11-CFG-MIB::hpnicfDot11SPBeaconMeasEnable,INTEGER,read-create,,current,true(1):false(2),If it is true, then beacon-measurement is enabled.
.1.3.6.1.4.1.11.2.14.11.15.2.75.4.2.2.1.20,HPN-ICF-DOT11-CFG-MIB::hpnicfDot11SPBeaconMeasType,INTEGER,read-create,,current,passive(1):active(2):beaconTable(3),Represents what the work mode for BeaconMeasurement type. The following values are supported: passive, - BeaconMeasurement will use the passive type. active - BeaconMeasurement will use the active type. beaconTable - BeaconMeasurement will use the beacon table type.
.1.3.6.1.4.1.11.2.14.11.15.2.75.4.2.2.1.21,HPN-ICF-DOT11-CFG-MIB::hpnicfDot11SPBeaconMeasInterval,Integer32,read-create,,current,,Represents the beacon-measurement interval.
.1.3.6.1.4.1.11.2.14.11.15.2.75.4.2.2.1.22,HPN-ICF-DOT11-CFG-MIB::hpnicfDot11AuthenModeCM,INTEGER,read-create,,current,opensystem(0):sharedkey(1),Represents the Authentication mode defined by 802.11.
.1.3.6.1.4.1.11.2.14.11.15.2.75.4.2.2.1.23,HPN-ICF-DOT11-CFG-MIB::hpnicfDot11SecIEStatusCM,INTEGER,read-create,,current,none(0):wpa(1):wpa2(2):wlanex(3),To enable the security Information element in the beacon and probe response frames sent by AP.
.1.3.6.1.4.1.11.2.14.11.15.2.75.4.2.2.1.24,HPN-ICF-DOT11-CFG-MIB::hpnicfDot11SecurityCiphersCM,INTEGER,read-create,,current,none(0):wep40(1):wep104(2):tkip(3):aesccmp(4):wpisms4(5),The WLAN system support the following cipher type for data frame encryption. none wep40 wep104 tkip aesccmp wpi-SMS4 When the value of node equals to zero, it means no configuration or undo operation.
.1.3.6.1.4.1.11.2.14.11.15.2.75.4.2.2.1.25,HPN-ICF-DOT11-CFG-MIB::hpnicfDot11SrvPolicyStatusCM,INTEGER,read-create,,current,off(0):on(1),The status of the Service Policy.
.1.3.6.1.4.1.11.2.14.11.15.2.75.4.2.2.1.26,HPN-ICF-DOT11-CFG-MIB::hpnicfDot11SSIDHiddenCM,INTEGER,read-create,,current,dot11false(0):dot11true(1),This attribute controls whether the SSID will be advertised in beacon frames. If it is dot11true, the SSID will not be advertised in beacon frames.
.1.3.6.1.4.1.11.2.14.11.15.2.75.4.2.2.1.27,HPN-ICF-DOT11-CFG-MIB::hpnicfDot11SPIsolateCM,INTEGER,read-create,,current,dot11false(0):dot11true(1),If it is dot11true, the clients connected with the service policy are isolated to each other.
.1.3.6.1.4.1.11.2.14.11.15.2.75.4.2.3,HPN-ICF-DOT11-CFG-MIB::hpnicfDot11ServicePolicyExtTable,,not-accessible,,current,,The table defines the parameters for ESS, as per service policy of CLI. When the value of hpnicfDot11SSIDEncryptionMode equals to cipher(2), more configuration for a ESS will be put into the table.
.1.3.6.1.4.1.11.2.14.11.15.2.75.4.2.3.1,HPN-ICF-DOT11-CFG-MIB::hpnicfDot11ServicePolicyExtEntry,,not-accessible,hpnicfDot11ServicePolicyExtID,current,,Each entry contains information of each service policy under cipher(2) mode.
.1.3.6.1.4.1.11.2.14.11.15.2.75.4.2.3.1.1,HPN-ICF-DOT11-CFG-MIB::hpnicfDot11ServicePolicyExtID,Integer32,not-accessible,,current,,Represents the ID of each service policy.
.1.3.6.1.4.1.11.2.14.11.15.2.75.4.2.3.1.2,HPN-ICF-DOT11-CFG-MIB::hpnicfDot11SecIEStatus,INTEGER,read-create,,current,none(1):rsn(2):wpa(3):all(4):ext(5),To enable the security Information element in the beacon and probe response frames sent by AP.
.1.3.6.1.4.1.11.2.14.11.15.2.75.4.2.3.1.3,HPN-ICF-DOT11-CFG-MIB::hpnicfDot11SecurityCiphers,Integer32,read-create,,current,,The WLAN system support the following cipher type for data frame encryption. wep40(2) tkip(4) aesccmp(16) wep104(32) wpisms4(64) wep128(128) For each service policy, it could support multiple cipher types at the same time. So the value of object could combine multiple value of cipher type above. When the value of node equals to zero, it means no configuration or undo operation.
.1.3.6.1.4.1.11.2.14.11.15.2.75.4.2.3.1.4,HPN-ICF-DOT11-CFG-MIB::hpnicfDot11CipherKeyIndex,Integer32,read-create,,current,,Represents the key index of cipher key for packet. When hpnicfDot11SecurityCiphers value is wep40 or wep104, the configuration will take effective.
.1.3.6.1.4.1.11.2.14.11.15.2.75.4.2.3.1.5,HPN-ICF-DOT11-CFG-MIB::hpnicfDot11CipherKey,OCTET,read-create,,current,,Represents the cipher key for packet. When hpnicfDot11SecurityCiphers value is wep40 or wep104, the configuration will take effective.
.1.3.6.1.4.1.11.2.14.11.15.2.75.4.2.3.1.6,HPN-ICF-DOT11-CFG-MIB::hpnicfDot11SrvPolicyExtRowStatus,INTEGER,read-create,,current,active(1):notInService(2):notReady(3):createAndGo(4):createAndWait(5):destroy(6),The status of this table entry.
.1.3.6.1.4.1.11.2.14.11.15.2.75.4.2.3.1.7,HPN-ICF-DOT11-CFG-MIB::hpnicfDot11CipherKeyType,INTEGER,read-create,,current,char(1):hex(2),Represents the cipher key type of hpnicfDot11CipherKey.
.1.3.6.1.4.1.11.2.14.11.15.2.75.4.2.4,HPN-ICF-DOT11-CFG-MIB::hpnicfDot11RadioPolicyExtTable,,not-accessible,,current,,The table defines the radio policy of each radio. It can't be modified if the radio policy is a default radio policy.
.1.3.6.1.4.1.11.2.14.11.15.2.75.4.2.4.1,HPN-ICF-DOT11-CFG-MIB::hpnicfDot11RadioPolicyExtEntry,,not-accessible,hpnicfDot11RPAPSerialID:hpnicfDot11RPRadioID,current,,Each entry contains information of each radio policy.
.1.3.6.1.4.1.11.2.14.11.15.2.75.4.2.4.1.1,HPN-ICF-DOT11-CFG-MIB::hpnicfDot11RPAPSerialID,OCTET,not-accessible,,current,,This object represents the Serial ID of AP.
.1.3.6.1.4.1.11.2.14.11.15.2.75.4.2.4.1.2,HPN-ICF-DOT11-CFG-MIB::hpnicfDot11RPRadioID,Integer32,not-accessible,,current,,This object represents each radio.
.1.3.6.1.4.1.11.2.14.11.15.2.75.4.2.4.1.3,HPN-ICF-DOT11-CFG-MIB::hpnicfDot11RPBeaconInterval,Integer32,read-write,,current,,This object represents the interval for Beacon management frame.
.1.3.6.1.4.1.11.2.14.11.15.2.75.4.2.4.1.4,HPN-ICF-DOT11-CFG-MIB::hpnicfDot11RPDtimInterval,Integer32,read-write,,current,,This object represents the number of beacon intervals that shall elapse between transmissions of Beacons frames containing a Traffic Indication Map (TIM) element whose DTIM count field is 0. This value is transmitted in the Delivery TIM (DTIM) Period field of Beacon frames.
.1.3.6.1.4.1.11.2.14.11.15.2.75.4.2.4.1.5,HPN-ICF-DOT11-CFG-MIB::hpnicfDot11RPRtsThreshold,Integer32,read-write,,current,,This object represents the current minimum size, in octets, of the MAC protocol data unit (MPDU), below which a Request to send/Clear to send (RTS/CTS) handshake shall not be performed.
.1.3.6.1.4.1.11.2.14.11.15.2.75.4.2.4.1.6,HPN-ICF-DOT11-CFG-MIB::hpnicfDot11RPFragThreshold,Integer32,read-write,,current,,This object represents the current maximum size, in octets, of the MPDU that may be delivered to the PHY. A MSDU shall be broken into fragments if its size exceeds the value of this attribute after adding MAC headers and trailers.
.1.3.6.1.4.1.11.2.14.11.15.2.75.4.2.4.1.7,HPN-ICF-DOT11-CFG-MIB::hpnicfDot11RPShortRetryThreshold,Integer32,read-write,,current,,This object represents the maximum number of transmission attempts of a frame, the length of which is less than or equal to hpnicfDot11RTSThreshold, that shall be made before a failure condition is indicated.
.1.3.6.1.4.1.11.2.14.11.15.2.75.4.2.4.1.8,HPN-ICF-DOT11-CFG-MIB::hpnicfDot11RPLongRetryThreshold,Integer32,read-write,,current,,This object represents the maximum number of transmission attempts of a frame, the length of which is longer than hpnicfDot11RTSThreshold, and that shall be made before a failure condition is indicated.
.1.3.6.1.4.1.11.2.14.11.15.2.75.4.2.4.1.9,HPN-ICF-DOT11-CFG-MIB::hpnicfDot11RPClientMaxCount,Integer32,read-write,,current,,This object represents the maximum number of stations supported by this radio policy.
.1.3.6.1.4.1.11.2.14.11.15.2.75.4.2.4.1.10,HPN-ICF-DOT11-CFG-MIB::hpnicfDot11RPBeaconIntervalCM,Integer32,read-write,,current,,This object represents beacon interval.
.1.3.6.1.4.1.11.2.14.11.15.2.75.4.2.5,HPN-ICF-DOT11-CFG-MIB::hpnicfDot11SrvPortSecurityTable,,not-accessible,,current,,This table defines the WLAN security status for ESS, BSS and WLAN-Ethernet interface which binding the crypto service-template. Otherwise, when binding the clear service-template, hpnicfPortSecurityTables should be used to configure port security.
.1.3.6.1.4.1.11.2.14.11.15.2.75.4.2.5.1,HPN-ICF-DOT11-CFG-MIB::hpnicfDot11SrvPortSecurityEntry,,not-accessible,hpnicfDot11SecurityServicePolicyID,current,,There is a row in this table for service policy.
.1.3.6.1.4.1.11.2.14.11.15.2.75.4.2.5.1.1,HPN-ICF-DOT11-CFG-MIB::hpnicfDot11SecurityServicePolicyID,Integer32,not-accessible,,current,,Represents the ID of each service policy.
.1.3.6.1.4.1.11.2.14.11.15.2.75.4.2.5.1.2,HPN-ICF-DOT11-CFG-MIB::hpnicfDot11SrvPortSecurityMode,INTEGER,read-write,,current,noRestrictions(1):userLoginSecureExt(2):psk(3):macAddressAndPsk(4):userLoginSecureExtOrPsk(5):ext(6),Determines the security modes of the WLAN port. noRestrictions The default value, no any security mode is set. userLoginSecureExt Access to the port is denied until the port client is authorized (by 802.1X). psk Access to the port is denied until the port client is authorized (by 802.1X key negotiation). macAddressAndPsk The MAC address is first authenticated and only if this succeeds does the psk then attempt user authentication. userLoginSecureExtOrPsk This selects both the userLoginSecureExt and psk modes together such that either is allowed to authorized access. Which mode works for client depends on the client's choice. ext Access to the port is denied until the port client is authenticated (by ext).
.1.3.6.1.4.1.11.2.14.11.15.2.75.4.2.5.1.3,HPN-ICF-DOT11-CFG-MIB::hpnicfDot11SrvSecurityKeyType,INTEGER,read-write,,current,userLoginTxKeyTypeNone(1):userLoginTxKeyTypeDot11Key(2):userLoginTxKeyTypeRsaRC4Key(3),This indicates the key type in the 802.1X EAPOL_Key packet. userLoginTxKeyTypeNone - This means the key type is not set yet. userLoginTxKeyTypeDot11Key - This selects the 802.11 key type. userLoginTxKeyTypeRsaRC4Key - This selects the RC4 key for RSA RC4 session encryption.
.1.3.6.1.4.1.11.2.14.11.15.2.75.4.2.5.1.4,HPN-ICF-DOT11-CFG-MIB::hpnicfDot11SrvSecurityPskKeyMode,INTEGER,read-write,,current,pskKeyModeNone(1):pskKeyModePassPhrase(2):pskKeyModeRawKey(3),This is the password input mode. When input as pskKeyModePassPhrase, hpnicfDot11SrvSecurityPskKeyString must be 8 to 63 characters; when input as pskKeyModeRawKey, hpnicfDot11SrvSecurityPskKeyString must be 64 characters and each character must be '0'-'9', 'a'-'f' and 'A'-'F'.
.1.3.6.1.4.1.11.2.14.11.15.2.75.4.2.5.1.5,HPN-ICF-DOT11-CFG-MIB::hpnicfDot11SrvSecurityPskKeyString,OCTET,read-write,,current,,This is the password string used for psk authentication.
.1.3.6.1.4.1.11.2.14.11.15.2.75.4.2.5.1.6,HPN-ICF-DOT11-CFG-MIB::hpnicfDot11SrvPortSecurityModeCM,INTEGER,read-write,,current,none(0):psk(1):radius(2):wlanex(3),Determines the security modes of the WLAN port. none - The default value, no any security mode is set. psk - Access to the port is denied until the port client is authorized (by 802.1X key negotiation). radius - Access to the port is denied until the port client is authorized (by 802.1X). wlanex - Access to the port is denied until the port client is authenticated by wlan cert.
.1.3.6.1.4.1.11.2.14.11.15.2.75.4.2.6,HPN-ICF-DOT11-CFG-MIB::hpnicfDot11SrvPolicyExtendTable,,not-accessible,,current,,The table defines the parameters of each service policy.
.1.3.6.1.4.1.11.2.14.11.15.2.75.4.2.6.1,HPN-ICF-DOT11-CFG-MIB::hpnicfDot11SrvPolicyExtendEntry,,not-accessible,hpnicfDot11ServicePolicyID,current,,Each entry contains information of each service policy.
.1.3.6.1.4.1.11.2.14.11.15.2.75.4.2.6.1.1,HPN-ICF-DOT11-CFG-MIB::hpnicfDot11SPEnable,INTEGER,read-write,,current,enable(1):disable(2),Represents whether the service policy is enabled.
.1.3.6.1.4.1.11.2.14.11.15.2.75.4.3,HPN-ICF-DOT11-CFG-MIB::hpnicfDot11APConfigGroup,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.2.75.4.3.1,HPN-ICF-DOT11-CFG-MIB::hpnicfDot11APTemplateTable,,not-accessible,,current,,By AP template CLI, administrator will configure the parameters of AP by convenience. Before AP boot up and connect to AC by CAPWAP tunnel, administrator will create AP template for each AP. When AP connect to AC, AC will assign configuration to AP by hpnicfDot11APSerialID information in AP template.
.1.3.6.1.4.1.11.2.14.11.15.2.75.4.3.1.1,HPN-ICF-DOT11-CFG-MIB::hpnicfDot11APTemplateEntry,,not-accessible,hpnicfDot11APTemplateName,current,,Each entry contains configuration information for each AP.
.1.3.6.1.4.1.11.2.14.11.15.2.75.4.3.1.1.1,HPN-ICF-DOT11-CFG-MIB::hpnicfDot11APTemplateName,OCTET,not-accessible,,current,,Represents the name of AP template.
.1.3.6.1.4.1.11.2.14.11.15.2.75.4.3.1.1.2,HPN-ICF-DOT11-CFG-MIB::hpnicfDot11APSerialID,OCTET,read-create,,current,,Represents AP serial id.
.1.3.6.1.4.1.11.2.14.11.15.2.75.4.3.1.1.3,HPN-ICF-DOT11-CFG-MIB::hpnicfDot11TemplateAPModelAlias,OCTET,read-create,,current,,Represents the alias of AP model name.
.1.3.6.1.4.1.11.2.14.11.15.2.75.4.3.1.1.4,HPN-ICF-DOT11-CFG-MIB::hpnicfDot11Description,OCTET,read-create,,current,,This attribute will give more information about AP. Administrator could suggest the location, owner or other information for each AP. If the value is set to NULL, the description will be removed.
.1.3.6.1.4.1.11.2.14.11.15.2.75.4.3.1.1.5,HPN-ICF-DOT11-CFG-MIB::hpnicfDot11APWorkMode,INTEGER,read-create,,current,normal(1):monitor(2):hybrid(3),Represents what work mode for AP. The following values are supported: normal - AP will supply WLAN service. monitor - AP will be a monitor to find attack. hybrid - AP will supply WLAN service and Device detection is enabled.
.1.3.6.1.4.1.11.2.14.11.15.2.75.4.3.1.1.6,HPN-ICF-DOT11-CFG-MIB::hpnicfDot11APTemplateRowStatus,INTEGER,read-create,,current,active(1):notInService(2):notReady(3):createAndGo(4):createAndWait(5):destroy(6),The status of this table entry.
.1.3.6.1.4.1.11.2.14.11.15.2.75.4.3.1.1.7,HPN-ICF-DOT11-CFG-MIB::hpnicfDot11APName,OCTET,read-create,,current,,Represents the AP name.
.1.3.6.1.4.1.11.2.14.11.15.2.75.4.3.1.1.8,HPN-ICF-DOT11-CFG-MIB::hpnicfDot11StatisInterv,Integer32,read-create,,current,,Represents the interval of radio statistic.
.1.3.6.1.4.1.11.2.14.11.15.2.75.4.3.1.1.9,HPN-ICF-DOT11-CFG-MIB::hpnicfDot11APBroadcastProbeReply,INTEGER,read-create,,current,true(1):false(2),Represents enable the AP to reply broadcast probe or not. 'true' : The AP to reply broadcast probe is enabled. 'false': The AP to reply broadcast probe is disabled
.1.3.6.1.4.1.11.2.14.11.15.2.75.4.3.1.1.10,HPN-ICF-DOT11-CFG-MIB::hpnicfDot11StaIdleTimerInterv,Integer32,read-create,,current,,Represents the interval for which the link between AP and STA ( power-save or awake ) can be idle.
.1.3.6.1.4.1.11.2.14.11.15.2.75.4.3.1.1.11,HPN-ICF-DOT11-CFG-MIB::hpnicfDot11StaKeepAliveTimerInterv,Integer32,read-create,,current,,Represents the interval of the keep alive requests sent between AP and STA.
.1.3.6.1.4.1.11.2.14.11.15.2.75.4.3.1.1.12,HPN-ICF-DOT11-CFG-MIB::hpnicfDot11APCir,Integer32,read-create,,current,,Represents the committed information rate between AP and AC.
.1.3.6.1.4.1.11.2.14.11.15.2.75.4.3.1.1.13,HPN-ICF-DOT11-CFG-MIB::hpnicfDot11APCbs,Integer32,read-create,,current,,Represents the committed burst size between AP and AC.
.1.3.6.1.4.1.11.2.14.11.15.2.75.4.3.1.1.14,HPN-ICF-DOT11-CFG-MIB::hpnicfDot11APPriorityLevel,Integer32,read-create,,current,,This object represents the connection priority for the AP. If the connection priority is 7, the AC is considered as the primary AC for the AP.
.1.3.6.1.4.1.11.2.14.11.15.2.75.4.3.1.1.15,HPN-ICF-DOT11-CFG-MIB::hpnicfDot11APElementID,Integer32,read-only,,current,,This object represents the AP element ID.
.1.3.6.1.4.1.11.2.14.11.15.2.75.4.3.1.1.16,HPN-ICF-DOT11-CFG-MIB::hpnicfDot11APDevDetectEnable,INTEGER,read-create,,current,true(1):false(2),Represents whether device detection is enabled or not. 'true' : Device detection is enabled. 'false': Device detection is disabled. If device detection is enabled, the AP will provide both device detection and WLAN data services. By default, the AP only provides WLAN data services. When an AP works in monitor mode, that is, the value of object hpnicfDot11APWorkMode is monitor, device detection can not be enabled with object hpnicfDot11APDevDetectEnable.
.1.3.6.1.4.1.11.2.14.11.15.2.75.4.3.1.1.17,HPN-ICF-DOT11-CFG-MIB::hpnicfDot11APGetIPMethod,INTEGER,read-create,,current,dhcpAlloc(1):static(2),This object represents the method how AP gets IP address.
.1.3.6.1.4.1.11.2.14.11.15.2.75.4.3.1.1.18,HPN-ICF-DOT11-CFG-MIB::hpnicfDot11StatisIntervMode,INTEGER,read-create,,current,normal(1):realtime(2),This object represents the mode of statics interval. normal - statics interval value between 10s to 120s realtime - statics interval value between 2s to 5s
.1.3.6.1.4.1.11.2.14.11.15.2.75.4.3.1.1.19,HPN-ICF-DOT11-CFG-MIB::hpnicfDot11ApTrapEnabled,INTEGER,read-write,,current,true(1):false(2),Represents whether the trap status is enabled or not. 'true' : Enable the trap status; 'false' : Disable the trap status.
.1.3.6.1.4.1.11.2.14.11.15.2.75.4.3.1.1.20,HPN-ICF-DOT11-CFG-MIB::hpnicfDot11ApFmwUpdState,INTEGER,read-create,,current,enable(1):disable(2):inherit(3),Represents the status of version auto-update for an AP. The following values are supported: enable - AP version will be updated automatically. disable - AP version will not be updated automatically. inherit - The status will inherit value from apgroup-view or system-view.
.1.3.6.1.4.1.11.2.14.11.15.2.75.4.3.1.1.21,HPN-ICF-DOT11-CFG-MIB::hpnicfDot11StatisIntervModeCM,INTEGER,read-create,,current,off(0):on(1),This object represents the mode of statistic interval. off - statistic interval value between 10s to 120s on - statistic interval value between 2s to 5s
.1.3.6.1.4.1.11.2.14.11.15.2.75.4.3.1.1.22,HPN-ICF-DOT11-CFG-MIB::hpnicfDot11ApNasIDCM,OCTET,read-create,,current,,Represents the NAS-ID of current service policy for each specific radio of AP.
.1.3.6.1.4.1.11.2.14.11.15.2.75.4.3.2,HPN-ICF-DOT11-CFG-MIB::hpnicfDot11RadioToConfigTable,,not-accessible,,current,,Before AP connects to AC, administrator will configure radio parameter to each radio.
.1.3.6.1.4.1.11.2.14.11.15.2.75.4.3.2.1,HPN-ICF-DOT11-CFG-MIB::hpnicfDot11RadioToConfigEntry,,not-accessible,hpnicfDot11APTemplateNameCfg:hpnicfDot11CfgRadioID,current,,Each entry contains configuration information for each radio.
.1.3.6.1.4.1.11.2.14.11.15.2.75.4.3.2.1.1,HPN-ICF-DOT11-CFG-MIB::hpnicfDot11APTemplateNameCfg,OCTET,not-accessible,,current,,Represents the name of AP template.
.1.3.6.1.4.1.11.2.14.11.15.2.75.4.3.2.1.2,HPN-ICF-DOT11-CFG-MIB::hpnicfDot11CfgRadioID,Integer32,not-accessible,,current,,Represents each radio.
.1.3.6.1.4.1.11.2.14.11.15.2.75.4.3.2.1.3,HPN-ICF-DOT11-CFG-MIB::hpnicfDot11CfgRadioPolicyName,OCTET,read-write,,current,,Represents the name of radio policy.
.1.3.6.1.4.1.11.2.14.11.15.2.75.4.3.2.1.4,HPN-ICF-DOT11-CFG-MIB::hpnicfDot11CfgRadioType,INTEGER,read-write,,current,dot11a(1):dot11b(2):dot11g(4):dot11n(8):dot11gn(16):dot11an(32):dot11ac(64),Represents the radio will work with which 802.11 radio type.
.1.3.6.1.4.1.11.2.14.11.15.2.75.4.3.2.1.5,HPN-ICF-DOT11-CFG-MIB::hpnicfDot11CfgChannel,Integer32,read-write,,current,,Represents the channel allocation of radio.
.1.3.6.1.4.1.11.2.14.11.15.2.75.4.3.2.1.6,HPN-ICF-DOT11-CFG-MIB::hpnicfDot11CfgMaxTxPowerLevel,Integer32,read-write,,current,,Represents the maximal transmit power scope for AP.
.1.3.6.1.4.1.11.2.14.11.15.2.75.4.3.2.1.7,HPN-ICF-DOT11-CFG-MIB::hpnicfDot11PreambleLen,INTEGER,read-write,,current,long(1):short(2),Represents whether use long or short preamble for 802.11 MAC frame. When hpnicfDot11CfgRadioType is either dot11b or dot11g, then value for hpnicfDot11PreambleLen will be valid. Otherwise, the value for it will be invalid.
.1.3.6.1.4.1.11.2.14.11.15.2.75.4.3.2.1.8,HPN-ICF-DOT11-CFG-MIB::hpnicfDot11CfgRadioStatus,INTEGER,read-write,,current,true(1):false(2),Represents the radio admin status whether is enabled or disabled.
.1.3.6.1.4.1.11.2.14.11.15.2.75.4.3.2.1.9,HPN-ICF-DOT11-CFG-MIB::hpnicfDot11CfgRdElementID,Unsigned32,read-only,,current,,Represents the element ID of this radio. It comprises two parts. The highest 24 bits are AP element ID and the lowest 8 bits are radio ID.
.1.3.6.1.4.1.11.2.14.11.15.2.75.4.3.2.1.10,HPN-ICF-DOT11-CFG-MIB::hpnicfDot11CfgWorkMode,INTEGER,read-write,,current,normal(1):monitor(2):hybrid(3),Represents work mode of the radio.
.1.3.6.1.4.1.11.2.14.11.15.2.75.4.3.2.1.11,HPN-ICF-DOT11-CFG-MIB::hpnicfDot11CfgPwrAttValue,Integer32,read-write,,current,,Represents the value of power attenuation.
.1.3.6.1.4.1.11.2.14.11.15.2.75.4.3.2.1.12,HPN-ICF-DOT11-CFG-MIB::hpnicfDot11RadioTxArithmetic,INTEGER,read-write,,current,quality(1):bandwidth(2),Represents the transmission arithmetic of the radio. The following values are supported: quality - Consider the quality first during the transmission. bandwidth - Consider the bandwidth first during the transmission.
.1.3.6.1.4.1.11.2.14.11.15.2.75.4.3.2.1.13,HPN-ICF-DOT11-CFG-MIB::hpnicfDot11CfgChannelLockStat,INTEGER,read-write,,current,unlocked(1):locked(2),Represents locked status of channel on the radio.
.1.3.6.1.4.1.11.2.14.11.15.2.75.4.3.2.1.14,HPN-ICF-DOT11-CFG-MIB::hpnicfDot11CfgPowerLockStat,INTEGER,read-write,,current,unlocked(1):locked(2),Represents locked status of power on the radio.
.1.3.6.1.4.1.11.2.14.11.15.2.75.4.3.2.1.15,HPN-ICF-DOT11-CFG-MIB::hpnicfDot11CfgLBRdGroupId,Unsigned32,read-write,,current,,Represents the load balance group ID allocated for the radio.
.1.3.6.1.4.1.11.2.14.11.15.2.75.4.3.2.1.16,HPN-ICF-DOT11-CFG-MIB::hpnicfDot11CfgRRMSDRdGroupId,Unsigned32,read-write,,current,,Represents the RRM self-decisive group ID allocated for the radio.
.1.3.6.1.4.1.11.2.14.11.15.2.75.4.3.2.1.17,HPN-ICF-DOT11-CFG-MIB::hpnicfDot11CfgRadioType2,INTEGER,read-write,,current,dot11a(1):dot11b(2):dot11g(4):dot11an(8):dot11gn(16):dot11ac(32),Represents the radio will work with which 802.11 radio type.
.1.3.6.1.4.1.11.2.14.11.15.2.75.4.3.2.1.18,HPN-ICF-DOT11-CFG-MIB::hpnicfDot11CfgIDSEnable,INTEGER,read-write,,current,true(1):false(2),Represents whether intrusion detection is enabled for this radio.
.1.3.6.1.4.1.11.2.14.11.15.2.75.4.3.2.1.19,HPN-ICF-DOT11-CFG-MIB::hpnicfDot11CfgSaEnable,INTEGER,read-write,,current,true(1):false(2),Represents whether spectrum analysis is enabled.
.1.3.6.1.4.1.11.2.14.11.15.2.75.4.3.2.1.20,HPN-ICF-DOT11-CFG-MIB::hpnicfDot11CfgSaCltRtFFTData,INTEGER,read-write,,current,true(1):false(2),Represents whether to collect real-time FFT data for this radio.
.1.3.6.1.4.1.11.2.14.11.15.2.75.4.3.2.1.21,HPN-ICF-DOT11-CFG-MIB::hpnicfDot11CfgSaBand,INTEGER,read-write,,current,dot11g(1):dot11aLower(2):dot11aMiddle(3):dot11aUpper(4),Represents which band of channels will be monitored when collection real-time FFT data is enabled for this radio. Detection of interference devices and air quality will also be affected. Each band responds to the following channels. dot11g (Channels 1-14) dot11aLower (channels 36-64) dot11aMiddle (channels 100-140) dot11aUpper (channels 149-165).
.1.3.6.1.4.1.11.2.14.11.15.2.75.4.3.3,HPN-ICF-DOT11-CFG-MIB::hpnicfDot11APServiceSetTable,,not-accessible,,current,,For each radio, it could configure multiple service policies. The table describes the relationship between radio and service policies.
.1.3.6.1.4.1.11.2.14.11.15.2.75.4.3.3.1,HPN-ICF-DOT11-CFG-MIB::hpnicfDot11APServiceSetEntry,,not-accessible,hpnicfDot11APTemplateNameCfg:hpnicfDot11CfgRadioID:hpnicfDot11CfgServicePolicyID,current,,Each entry contains service policy information for each specific radio of AP.
.1.3.6.1.4.1.11.2.14.11.15.2.75.4.3.3.1.1,HPN-ICF-DOT11-CFG-MIB::hpnicfDot11CfgServicePolicyID,Integer32,not-accessible,,current,,Represents the ID of each service policy used by the AP.
.1.3.6.1.4.1.11.2.14.11.15.2.75.4.3.3.1.2,HPN-ICF-DOT11-CFG-MIB::hpnicfDot11SrvSetRowStatus,INTEGER,read-create,,current,active(1):notInService(2):notReady(3):createAndGo(4):createAndWait(5):destroy(6),The status of this table entry.
.1.3.6.1.4.1.11.2.14.11.15.2.75.4.3.3.1.3,HPN-ICF-DOT11-CFG-MIB::hpnicfDot11ServiceSetVlanId,Integer32,read-create,,current,,Represents the Vlan ID of BSS which is generated when service policy is binded with the Radio.
.1.3.6.1.4.1.11.2.14.11.15.2.75.4.3.4,HPN-ICF-DOT11-CFG-MIB::hpnicfDot11APSysInfoSetTable,,not-accessible,,current,,The table of the system information for each AP.
.1.3.6.1.4.1.11.2.14.11.15.2.75.4.3.4.1,HPN-ICF-DOT11-CFG-MIB::hpnicfDot11APSysInfoSetEntry,,not-accessible,hpnicfDot11SIDAPSerialID,current,,The system information configuration for each AP.
.1.3.6.1.4.1.11.2.14.11.15.2.75.4.3.4.1.1,HPN-ICF-DOT11-CFG-MIB::hpnicfDot11APSysNetID,OCTET,read-write,,current,,Represents the system Net ID for AP.
.1.3.6.1.4.1.11.2.14.11.15.2.75.4.3.4.1.2,HPN-ICF-DOT11-CFG-MIB::hpnicfDot11APCpuUsageThreshold,Integer32,read-write,,current,,The CPU usage threshold for AP.
.1.3.6.1.4.1.11.2.14.11.15.2.75.4.3.4.1.3,HPN-ICF-DOT11-CFG-MIB::hpnicfDot11APMemUsageThreshold,Integer32,read-write,,current,,The memory usage threshold for AP.
.1.3.6.1.4.1.11.2.14.11.15.2.75.4.3.5,HPN-ICF-DOT11-CFG-MIB::hpnicfDot11APLimitTable,,not-accessible,,current,,For each connected APs, administrator could configure a series of limits. This table describes the limit information for AP(s).
.1.3.6.1.4.1.11.2.14.11.15.2.75.4.3.5.1,HPN-ICF-DOT11-CFG-MIB::hpnicfDot11APLimitEntry,,not-accessible,hpnicfDot11APElementIndex,current,,Each entry contains the limit information for each AP.
.1.3.6.1.4.1.11.2.14.11.15.2.75.4.3.5.1.1,HPN-ICF-DOT11-CFG-MIB::hpnicfDot11APSsidNumLimit,Integer32,read-write,,current,,Represents the upper limit of service template binded with this AP. All radios of AP share this limit. Default value 0 : There is no upper limit of service template binded with this AP.
.1.3.6.1.4.1.11.2.14.11.15.2.75.4.3.5.1.2,HPN-ICF-DOT11-CFG-MIB::hpnicfDot11APUserCntLimit,Integer32,read-write,,current,,Represents the upper limit of user which has access to this AP. All BSSs binded with AP share this limit. Default value 0 : There is no upper limit of user which has access to this AP.
.1.3.6.1.4.1.11.2.14.11.15.2.75.4.3.5.1.3,HPN-ICF-DOT11-CFG-MIB::hpnicfDot11APUserThreshold,Integer32,read-write,,current,,Represents the threshold of user which has access to this AP. All BSSs binded with AP share this limit. If the user counter is overflow, the trap will be sent. Default value 0 : There is no threshold of user which has access to this AP.
.1.3.6.1.4.1.11.2.14.11.15.2.75.4.3.6,HPN-ICF-DOT11-CFG-MIB::hpnicfDot11APIfSetTable,,not-accessible,,current,,The table of the interface information for each AP.
.1.3.6.1.4.1.11.2.14.11.15.2.75.4.3.6.1,HPN-ICF-DOT11-CFG-MIB::hpnicfDot11APIfSetEntry,,not-accessible,hpnicfDot11APElementIndex:hpnicfDot11APSetIfIndex,current,,The interface information configuration for each AP.
.1.3.6.1.4.1.11.2.14.11.15.2.75.4.3.6.1.1,HPN-ICF-DOT11-CFG-MIB::hpnicfDot11APSetIfIndex,Integer32,not-accessible,,current,,Represents the index for a interface.
.1.3.6.1.4.1.11.2.14.11.15.2.75.4.3.6.1.2,HPN-ICF-DOT11-CFG-MIB::hpnicfDot11APIfAlias,OCTET,read-write,,current,,This object is an 'alias' name for the interface as specified by a network manager for AP.
.1.3.6.1.4.1.11.2.14.11.15.2.75.4.3.7,HPN-ICF-DOT11-CFG-MIB::hpnicfDot11APServiceVlanTable,,not-accessible,,current,,For all the radios on the AP, it could configure multiple service policies. The table describes the relationship between AP and service policies.
.1.3.6.1.4.1.11.2.14.11.15.2.75.4.3.7.1,HPN-ICF-DOT11-CFG-MIB::hpnicfDot11APServiceVlanEntry,,not-accessible,hpnicfDot11APServiceVlanSerialID:hpnicfDot11APServiceVlanSPID,current,,Each entry contains service policy information for each AP.
.1.3.6.1.4.1.11.2.14.11.15.2.75.4.3.7.1.1,HPN-ICF-DOT11-CFG-MIB::hpnicfDot11APServiceVlanSerialID,OCTET,not-accessible,,current,,This object represents AP serial id.
.1.3.6.1.4.1.11.2.14.11.15.2.75.4.3.7.1.2,HPN-ICF-DOT11-CFG-MIB::hpnicfDot11APServiceVlanSPID,Integer32,not-accessible,,current,,This object represents the ID of each service policy used by the AP.
.1.3.6.1.4.1.11.2.14.11.15.2.75.4.3.7.1.3,HPN-ICF-DOT11-CFG-MIB::hpnicfDot11APServiceVlanId,Integer32,read-create,,current,,This object represents the VLAN ID of BSS which is generated when the service policy is bound to the radio.
.1.3.6.1.4.1.11.2.14.11.15.2.75.4.3.7.1.4,HPN-ICF-DOT11-CFG-MIB::hpnicfDot11APServiceVlanRowStatus,INTEGER,read-create,,current,active(1):notInService(2):notReady(3):createAndGo(4):createAndWait(5):destroy(6),This object represents the status of this table entry.
.1.3.6.1.4.1.11.2.14.11.15.2.75.4.3.8,HPN-ICF-DOT11-CFG-MIB::hpnicfDot11RadioConfigTable,,not-accessible,,current,,Before AP connects to AC, administrator will configure radio parameter to each radio.
.1.3.6.1.4.1.11.2.14.11.15.2.75.4.3.8.1,HPN-ICF-DOT11-CFG-MIB::hpnicfDot11RadioConfigEntry,,not-accessible,hpnicfDot11RCAPSerialID:hpnicfDot11RCRadioID,current,,Each entry contains configuration information for each radio.
.1.3.6.1.4.1.11.2.14.11.15.2.75.4.3.8.1.1,HPN-ICF-DOT11-CFG-MIB::hpnicfDot11RCAPSerialID,OCTET,not-accessible,,current,,This object represents the Serial ID of AP.
.1.3.6.1.4.1.11.2.14.11.15.2.75.4.3.8.1.2,HPN-ICF-DOT11-CFG-MIB::hpnicfDot11RCRadioID,Integer32,not-accessible,,current,,This object represents each radio.
.1.3.6.1.4.1.11.2.14.11.15.2.75.4.3.8.1.3,HPN-ICF-DOT11-CFG-MIB::hpnicfDot11RCRadioType,INTEGER,read-write,,current,dot11a(1):dot11b(2):dot11g(4):dot11n(8):dot11gn(16):dot11an(32):dot11ac(64),This object represents the radio will work with which 802.11 radio type.
.1.3.6.1.4.1.11.2.14.11.15.2.75.4.3.8.1.4,HPN-ICF-DOT11-CFG-MIB::hpnicfDot11RCChannel,Integer32,read-write,,current,,This object represents the channel allocation of radio.
.1.3.6.1.4.1.11.2.14.11.15.2.75.4.3.8.1.5,HPN-ICF-DOT11-CFG-MIB::hpnicfDot11RCPreambleLen,INTEGER,read-write,,current,long(1):short(2),This object represents whether use long or short preamble for 802.11 MAC frame. When hpnicfDot11CfgRadioType is either dot11b or dot11g, then value for hpnicfDot11PreambleLen will be valid. Otherwise, the value for it will be invalid.
.1.3.6.1.4.1.11.2.14.11.15.2.75.4.3.8.1.6,HPN-ICF-DOT11-CFG-MIB::hpnicfDot11RCPwrAttValue,Integer32,read-write,,current,,This object represents the value of power attenuation.
.1.3.6.1.4.1.11.2.14.11.15.2.75.4.3.8.1.7,HPN-ICF-DOT11-CFG-MIB::hpnicfDot11RCApPowerLevel,Integer32,read-write,,current,,Represents the maximal transmit power scope for AP.
.1.3.6.1.4.1.11.2.14.11.15.2.75.4.3.8.1.8,HPN-ICF-DOT11-CFG-MIB::hpnicfDot11RCDynamicChlState,INTEGER,read-write,,current,true(1):false(2),Enable/Disable dynamic channel selection.
.1.3.6.1.4.1.11.2.14.11.15.2.75.4.3.8.1.9,HPN-ICF-DOT11-CFG-MIB::hpnicfDot11RCDynamicPowerState,INTEGER,read-write,,current,true(1):false(2),Enable/Disable dynamic power selection for the band.
.1.3.6.1.4.1.11.2.14.11.15.2.75.4.3.8.1.10,HPN-ICF-DOT11-CFG-MIB::hpnicfDot11RCRadioStatus,INTEGER,read-write,,current,true(1):false(2),Represents the radio admin status whether is enabled or disabled.
.1.3.6.1.4.1.11.2.14.11.15.2.75.4.3.8.1.11,HPN-ICF-DOT11-CFG-MIB::hpnicfDot11RCRadioRate,OCTET,read-write,,current,,Set data transmit rates for the radio, in the format of 1,2,5.5... For 802.11n radios, the format can be MCS X. The data transmit rates between AP and STA must fall into the configured rates. (Note: For 802.11n radios, the first value will be treated as a mandatory rate, and the second value will be treated as a supported rate. If you configure more than two rates, the configuration cannot take effect. If you configure only one rate, it is considered as the mandatory rate by default.)
.1.3.6.1.4.1.11.2.14.11.15.2.75.4.3.8.1.12,HPN-ICF-DOT11-CFG-MIB::hpnicfDot11RCPwrAdjustStepLength,Integer32,read-only,,current,,Power adjustment step-length in dBm.
.1.3.6.1.4.1.11.2.14.11.15.2.75.4.3.8.1.13,HPN-ICF-DOT11-CFG-MIB::hpnicfDot11RCRadioType2,INTEGER,read-write,,current,dot11a(1):dot11b(2):dot11g(4):dot11an(8):dot11gn(16):dot11ac(32),This object represents the radio will work with which 802.11 radio type.
.1.3.6.1.4.1.11.2.14.11.15.2.75.4.3.8.1.14,HPN-ICF-DOT11-CFG-MIB::hpnicfDot11RCPreambleLenCM,INTEGER,read-write,,current,long(0):short(1),This object represents whether use long or short preamble for 802.11 MAC frame. When hpnicfDot11CfgRadioType is either dot11b or dot11g, then value for hpnicfDot11PreambleLenCM will be valid. Otherwise, the value for it will be invalid.
.1.3.6.1.4.1.11.2.14.11.15.2.75.4.3.8.1.15,HPN-ICF-DOT11-CFG-MIB::hpnicfDot11RCDynamicChlStateCM,INTEGER,read-write,,current,off(0):on(1),Enable/Disable dynamic channel selection.
.1.3.6.1.4.1.11.2.14.11.15.2.75.4.3.8.1.16,HPN-ICF-DOT11-CFG-MIB::hpnicfDot11RCRadioStatusCM,INTEGER,read-write,,current,up(1):down(2):testing(3),Represents the radio admin status whether is enabled or disabled.
.1.3.6.1.4.1.11.2.14.11.15.2.75.4.3.8.1.17,HPN-ICF-DOT11-CFG-MIB::hpnicfDot11RCRadioRateCM,OCTET,read-write,,current,,Set data transmit rates for the radio, in the format of 1,2,5.5... For 802.11n radios, the format of each value can be MCS X. The data transmit rates between AP and client should be one of the configured rates. (Note: For 802.11n radios, the first value is mandatory rate, and the second value is supported rate. If more than two rate values are configured, the configuration will not take effect. If only one rate value is configured, the mandatory rate will be set to the default value.)
.1.3.6.1.4.1.11.2.14.11.15.2.75.4.3.8.1.18,HPN-ICF-DOT11-CFG-MIB::hpnicfDot11RCDynamicPowerStateCM,INTEGER,read-write,,current,dot11false(0):dot11true(1),Enable/disable dynamic power selection for the band.
.1.3.6.1.4.1.11.2.14.11.15.2.75.4.3.9,HPN-ICF-DOT11-CFG-MIB::hpnicfDot11RadioSSIDCfgTable,,not-accessible,,current,,For each radio, it could configure multiple service policies. The table describes the relationship between radio and service policies.
.1.3.6.1.4.1.11.2.14.11.15.2.75.4.3.9.1,HPN-ICF-DOT11-CFG-MIB::hpnicfDot11RadioSSIDCfgEntry,,not-accessible,hpnicfDot11RadioSSIDSerialID:hpnicfDot11RadioSSIDRadioID:hpnicfDot11RadioSSIDWLANID,current,,Each entry contains SSID configuration information for each radio.
.1.3.6.1.4.1.11.2.14.11.15.2.75.4.3.9.1.1,HPN-ICF-DOT11-CFG-MIB::hpnicfDot11RadioSSIDSerialID,OCTET,not-accessible,,current,,This object represents the serial ID of AP.
.1.3.6.1.4.1.11.2.14.11.15.2.75.4.3.9.1.2,HPN-ICF-DOT11-CFG-MIB::hpnicfDot11RadioSSIDRadioID,Integer32,not-accessible,,current,,This object represents each radio.
.1.3.6.1.4.1.11.2.14.11.15.2.75.4.3.9.1.3,HPN-ICF-DOT11-CFG-MIB::hpnicfDot11RadioSSIDWLANID,Integer32,not-accessible,,current,,This object represents the WLAN ID of the BSSID.
.1.3.6.1.4.1.11.2.14.11.15.2.75.4.3.9.1.4,HPN-ICF-DOT11-CFG-MIB::hpnicfDot11RadioSSIDIndex,Integer32,read-create,,current,,This object represents the ID of each service policy used by the radio.
.1.3.6.1.4.1.11.2.14.11.15.2.75.4.3.9.1.5,HPN-ICF-DOT11-CFG-MIB::hpnicfDot11RadioBSSID,OCTET,read-only,,current,,As MAC address format, it is used to identify BSS.
.1.3.6.1.4.1.11.2.14.11.15.2.75.4.3.9.1.6,HPN-ICF-DOT11-CFG-MIB::hpnicfDot11RadioSSIDRowStatus,INTEGER,read-create,,current,active(1):notInService(2):notReady(3):createAndGo(4):createAndWait(5):destroy(6),RowStatus.
.1.3.6.1.4.1.11.2.14.11.15.2.75.4.3.10,HPN-ICF-DOT11-CFG-MIB::hpnicfDot11APSerialIDTable,,not-accessible,,current,,The table will provide the general information about APs.
.1.3.6.1.4.1.11.2.14.11.15.2.75.4.3.10.1,HPN-ICF-DOT11-CFG-MIB::hpnicfDot11APSerialIDEntry,,not-accessible,hpnicfDot11SIDAPSerialID,current,,Each entry contains the general information of an AP.
.1.3.6.1.4.1.11.2.14.11.15.2.75.4.3.10.1.1,HPN-ICF-DOT11-CFG-MIB::hpnicfDot11SIDAPSerialID,OCTET,not-accessible,,current,,Represents AP serial id.
.1.3.6.1.4.1.11.2.14.11.15.2.75.4.3.10.1.2,HPN-ICF-DOT11-CFG-MIB::hpnicfDot11SIDAPWorkMode,INTEGER,read-create,,current,normal(1):monitor(2):hybrid(3),Represents what work mode for AP. The following values are supported: normal - AP will supply WLAN service. monitor - AP will be a monitor to find attack. hybrid - AP will supply WLAN service and Device detection is enabled.
.1.3.6.1.4.1.11.2.14.11.15.2.75.4.3.10.1.3,HPN-ICF-DOT11-CFG-MIB::hpnicfDot11SIDAPGetIPMethod,INTEGER,read-create,,current,dhcpAlloc(1):static(2),This object represents the method how AP gets IP address.
.1.3.6.1.4.1.11.2.14.11.15.2.75.4.3.10.1.4,HPN-ICF-DOT11-CFG-MIB::hpnicfDot11SIDAPTemplateName,OCTET,read-create,,current,,Represents the name of AP template.
.1.3.6.1.4.1.11.2.14.11.15.2.75.4.3.10.1.5,HPN-ICF-DOT11-CFG-MIB::hpnicfDot11SIDModelAlias,OCTET,read-create,,current,,Represents the alias of AP model name.
.1.3.6.1.4.1.11.2.14.11.15.2.75.4.3.10.1.6,HPN-ICF-DOT11-CFG-MIB::hpnicfDot11SIDAPDescription,OCTET,read-create,,current,,This attribute will give more information about AP. Administrator could suggest the location, owner or other information for each AP. If the value is set to NULL, the description will be removed.
.1.3.6.1.4.1.11.2.14.11.15.2.75.4.3.10.1.7,HPN-ICF-DOT11-CFG-MIB::hpnicfDot11SIDRowStatus,INTEGER,read-create,,current,active(1):notInService(2):notReady(3):createAndGo(4):createAndWait(5):destroy(6),The status of this table entry.
.1.3.6.1.4.1.11.2.14.11.15.2.75.4.3.10.1.8,HPN-ICF-DOT11-CFG-MIB::hpnicfDot11SIDAPName,OCTET,read-create,,current,,Represents the AP name.
.1.3.6.1.4.1.11.2.14.11.15.2.75.4.3.10.1.9,HPN-ICF-DOT11-CFG-MIB::hpnicfDot11SIDStatisInterv,Integer32,read-create,,current,,Represents the interval of radio statistic.
.1.3.6.1.4.1.11.2.14.11.15.2.75.4.3.10.1.10,HPN-ICF-DOT11-CFG-MIB::hpnicfDot11SIDAPBroadcastProbeReply,INTEGER,read-create,,current,true(1):false(2),Represents enable the AP to reply broadcast probe or not. 'true' : The AP to reply broadcast probe is enabled. 'false': The AP to reply broadcast probe is disabled
.1.3.6.1.4.1.11.2.14.11.15.2.75.4.3.10.1.11,HPN-ICF-DOT11-CFG-MIB::hpnicfDot11SIDAPStaIdleTimerInterv,Integer32,read-create,,current,,Represents the interval for which the link between AP and STA ( power-save or awake ) can be idle.
.1.3.6.1.4.1.11.2.14.11.15.2.75.4.3.10.1.12,HPN-ICF-DOT11-CFG-MIB::hpnicfDot11SIDStaKeepAliveTimerInterv,Integer32,read-create,,current,,Represents the interval of the keep alive requests sent between AP and STA.
.1.3.6.1.4.1.11.2.14.11.15.2.75.4.3.10.1.13,HPN-ICF-DOT11-CFG-MIB::hpnicfDot11SIDAPCir,Integer32,read-create,,current,,Represents the committed information rate between AP and AC.
.1.3.6.1.4.1.11.2.14.11.15.2.75.4.3.10.1.14,HPN-ICF-DOT11-CFG-MIB::hpnicfDot11SIDAPCbs,Integer32,read-create,,current,,Represents the committed burst size between AP and AC.
.1.3.6.1.4.1.11.2.14.11.15.2.75.4.3.10.1.15,HPN-ICF-DOT11-CFG-MIB::hpnicfDot11SIDAPPriorityLevel,Integer32,read-create,,current,,This object represents the connection priority for the AP. If the connection priority is 7, the AC is considered as the primary AC for the AP.
.1.3.6.1.4.1.11.2.14.11.15.2.75.4.3.10.1.16,HPN-ICF-DOT11-CFG-MIB::hpnicfDot11SIDAPElementID,Integer32,read-only,,current,,This object represents the AP element ID.
.1.3.6.1.4.1.11.2.14.11.15.2.75.4.3.10.1.17,HPN-ICF-DOT11-CFG-MIB::hpnicfDot11SIDAPDevDetectEnable,INTEGER,read-create,,current,true(1):false(2),Represents whether device detection is enabled or not. 'true' : Device detection is enabled. 'false': Device detection is disabled. If device detection is enabled, the AP will provide both device detection and WLAN data services. By default, the AP only provides WLAN data services. When an AP works in monitor mode, that is, the value of object hpnicfDot11APWorkMode is monitor, device detection can not be enabled with object hpnicfDot11SIDAPDevDetectEnable.
.1.3.6.1.4.1.11.2.14.11.15.2.75.4.3.10.1.18,HPN-ICF-DOT11-CFG-MIB::hpnicfDot11SIDAPStatisIntervMode,INTEGER,read-create,,current,normal(1):realtime(2),This object represents the mode of statics interval. normal - statics interval value between 10s to 120s realtime - statics interval value between 2s to 5s
.1.3.6.1.4.1.11.2.14.11.15.2.75.4.3.10.1.19,HPN-ICF-DOT11-CFG-MIB::hpnicfDot11SIDAPWorkModeCM,INTEGER,read-create,,current,normal(0):monitor(1):semimonitor(2),Represents what work mode for AP. The following values are supported: normal - AP will supply WLAN service. monitor - AP will be a monitor to find attack. SemiMonitor - AP will supply WLAN service and Device detection is enabled.
.1.3.6.1.4.1.11.2.14.11.15.2.75.4.3.11,HPN-ICF-DOT11-CFG-MIB::hpnicfDot11APSTVlanTable,,not-accessible,,current,,For each service policy, it could be bind to several VLANs. The table describes the relationship between VLAN and service policies.
.1.3.6.1.4.1.11.2.14.11.15.2.75.4.3.11.1,HPN-ICF-DOT11-CFG-MIB::hpnicfDot11APSTVlanEntry,,not-accessible,hpnicfDot11SIDAPSerialID:hpnicfDot11CfgRadioID:hpnicfDot11CfgServicePolicyID,current,,Each entry contains VLAN and service policy information for each specific radio of AP.
.1.3.6.1.4.1.11.2.14.11.15.2.75.4.3.11.1.1,HPN-ICF-DOT11-CFG-MIB::hpnicfDot11CfgSTVLANID,Integer32,read-create,,current,,Represents the VLAN that current Service Policy have bind to.
.1.3.6.1.4.1.11.2.14.11.15.2.75.4.3.11.1.2,HPN-ICF-DOT11-CFG-MIB::hpnicfDot11CfgSTNASPortID,OCTET,read-only,,current,,Represents the NAS Port ID of current Service Policy for each specific radio of AP.
.1.3.6.1.4.1.11.2.14.11.15.2.75.4.3.11.1.3,HPN-ICF-DOT11-CFG-MIB::hpnicfDot11CfgServiceSetRowStatus,INTEGER,read-create,,current,active(1):notInService(2):notReady(3):createAndGo(4):createAndWait(5):destroy(6),The status of this table entry.
.1.3.6.1.4.1.11.2.14.11.15.2.75.4.3.11.1.4,HPN-ICF-DOT11-CFG-MIB::hpnicfDot11CfgSTNASID,OCTET,read-only,,current,,Represents the NAS ID of current Service Policy for each specific radio of AP.
.1.3.6.1.4.1.11.2.14.11.15.2.75.4.4,HPN-ICF-DOT11-CFG-MIB::hpnicfDot11RadioIntfConfigGroup,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.2.75.4.4.1,HPN-ICF-DOT11-CFG-MIB::hpnicfDot11RadioIntfConfigTable,,not-accessible,,current,,The table defines the parameters for radio in AP, as per radio.
.1.3.6.1.4.1.11.2.14.11.15.2.75.4.4.1.1,HPN-ICF-DOT11-CFG-MIB::hpnicfDot11RadioIntfConfigEntry,,not-accessible,hpnicfDot11RadioIfIdx,current,,Each entry contains information of each radio in AP.
.1.3.6.1.4.1.11.2.14.11.15.2.75.4.4.1.1.1,HPN-ICF-DOT11-CFG-MIB::hpnicfDot11RadioIfIdx,Integer32,not-accessible,,current,,Represents the Radio IfIndex of radio in AP.
.1.3.6.1.4.1.11.2.14.11.15.2.75.4.4.1.1.2,HPN-ICF-DOT11-CFG-MIB::hpnicfDot11RadioCfgBeaconIntvl,Integer32,read-write,,current,,Represents the interval for Beacon management frame.
.1.3.6.1.4.1.11.2.14.11.15.2.75.4.4.1.1.3,HPN-ICF-DOT11-CFG-MIB::hpnicfDot11RadioCfgDtimIntvl,Integer32,read-write,,current,,Represents the number of beacon intervals that shall elapse between transmission of Beacons frames containing a Traffic Indication Map (TIM) element whose DTIM Count field is 0. This value is transmitted in the Delivery TIM (DTIM) Period field of Beacon frames.
.1.3.6.1.4.1.11.2.14.11.15.2.75.4.4.1.1.4,HPN-ICF-DOT11-CFG-MIB::hpnicfDot11RadioCfgRtsThreshold,Integer32,read-write,,current,,Represents the current minimum size,in octets,of the MAC protocol data unit (MPDU), below which a Request to send/Clear to send (RTS/CTS) handshake shall not be performed.
.1.3.6.1.4.1.11.2.14.11.15.2.75.4.4.1.1.5,HPN-ICF-DOT11-CFG-MIB::hpnicfDot11RadioCfgFragThreshold,Integer32,read-write,,current,,Represents the current maximum size, in octets, of the MPDU that may be delivered to the PHY. A MSDU shall be broken into fragments if its size exceeds the value of this attribute after adding MAC headers and trailers.
.1.3.6.1.4.1.11.2.14.11.15.2.75.4.4.1.1.6,HPN-ICF-DOT11-CFG-MIB::hpnicfDot11RadioCfgShtRetryThld,Integer32,read-write,,current,,Represents the maximum number of transmission attempts of a frame, the length of which is less than or equal to hpnicfDot11RadioRTSThreshold, that shall be made before a failure condition is indicated.
.1.3.6.1.4.1.11.2.14.11.15.2.75.4.4.1.1.7,HPN-ICF-DOT11-CFG-MIB::hpnicfDot11RadioCfglongRtrThld,Integer32,read-write,,current,,Represents the maximum number of transmission attempts of a frame, the length of which is longer than hpnicfDot11RadioRTSThreshold, that shall be made before a failure condition is indicated.
.1.3.6.1.4.1.11.2.14.11.15.2.75.4.4.1.1.8,HPN-ICF-DOT11-CFG-MIB::hpnicfDot11RadioCfgMaxRxLifetime,Unsigned32,read-write,,current,,Represents the elapsed time. After the time specified by hpnicfDot11RadioCfgMaxRxLifetime, the further attempts to reassemble the MSDU shall be terminated.
.1.3.6.1.4.1.11.2.14.11.15.2.75.4.4.1.1.9,HPN-ICF-DOT11-CFG-MIB::hpnicfDot11RadioCfgType,INTEGER,read-write,,current,dot11a(1):dot11b(2):dot11g(4):dot11n(8):dot11gn(16):dot11an(32):dot11ac(64),Represents the radio will work with which 802.11 radio type.
.1.3.6.1.4.1.11.2.14.11.15.2.75.4.4.1.1.10,HPN-ICF-DOT11-CFG-MIB::hpnicfDot11RadioCfgChannel,Integer32,read-write,,current,,Represents the channel allocation of radio.
.1.3.6.1.4.1.11.2.14.11.15.2.75.4.4.1.1.11,HPN-ICF-DOT11-CFG-MIB::hpnicfDot11RadioCfgMaxTxPwrLvl,Integer32,read-write,,current,,Represents the maximal transmit power scope for AP.
.1.3.6.1.4.1.11.2.14.11.15.2.75.4.4.1.1.12,HPN-ICF-DOT11-CFG-MIB::hpnicfDot11RadioCfgPreambleLen,INTEGER,read-write,,current,long(1):short(2),Represents whether use long or short preamble for 802.11 MAC frame.
.1.3.6.1.4.1.11.2.14.11.15.2.75.4.4.1.1.13,HPN-ICF-DOT11-CFG-MIB::hpnicfDot11RadioCfgWorkMode,INTEGER,read-write,,current,normal(1):monitor(2):hybrid(3),Represents work mode of the radio.
.1.3.6.1.4.1.11.2.14.11.15.2.75.4.4.1.1.14,HPN-ICF-DOT11-CFG-MIB::hpnicfDot11RadioCfgOnly11gEnable,INTEGER,read-write,,current,true(1):false(2),Represents whether enable only 802.11g radio mode or not. 'true' : Only 802.11g radio mode is enabled. 'false': Only 802.11g radio mode is disabled.
.1.3.6.1.4.1.11.2.14.11.15.2.75.4.4.1.1.15,HPN-ICF-DOT11-CFG-MIB::hpnicfDot11RadioCfgType2,INTEGER,read-write,,current,dot11a(1):dot11b(2):dot11g(4):dot11an(8):dot11gn(16):dot11ac(32),Represents the radio will work with which 802.11 radio type.
.1.3.6.1.4.1.11.2.14.11.15.2.75.4.4.1.1.16,HPN-ICF-DOT11-CFG-MIB::hpnicfDot11RadioCfgRssithresholdCM,Integer32,read-write,,current,,Represents the minimum value of the RSSI. The clients with RSSI below this value will be refused to associate.
.1.3.6.1.4.1.11.2.14.11.15.2.75.4.4.2,HPN-ICF-DOT11-CFG-MIB::hpnicfDot11RadioIntfBindTable,,not-accessible,,current,,The table defines the binding information for each radio in AP. 
.1.3.6.1.4.1.11.2.14.11.15.2.75.4.4.2.1,HPN-ICF-DOT11-CFG-MIB::hpnicfDot11RadioIntfBindEntry,,not-accessible,hpnicfDot11RadioIfIdx:hpnicfDot11RadioIntfBindSvcPlcyID,current,,Each entry contains the radio interface binding information in AP.
.1.3.6.1.4.1.11.2.14.11.15.2.75.4.4.2.1.1,HPN-ICF-DOT11-CFG-MIB::hpnicfDot11RadioIntfBindSvcPlcyID,Integer32,not-accessible,,current,,Represents the ID of each service policy.
.1.3.6.1.4.1.11.2.14.11.15.2.75.4.4.2.1.2,HPN-ICF-DOT11-CFG-MIB::hpnicfDot11RadioIntfBindIfIdx,Unsigned32,read-create,,current,,Represents the Ifindex of interface which is binded to the radio.
.1.3.6.1.4.1.11.2.14.11.15.2.75.4.4.2.1.3,HPN-ICF-DOT11-CFG-MIB::hpnicfDot11RadioIntfBindRowStatus,INTEGER,read-create,,current,active(1):notInService(2):notReady(3):createAndGo(4):createAndWait(5):destroy(6),The status of this table entry.
.1.3.6.1.4.1.11.2.14.11.15.2.75.4.5,HPN-ICF-DOT11-CFG-MIB::hpnicfDot11DataRateConfigGroup,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.2.75.4.5.1,HPN-ICF-DOT11-CFG-MIB::hpnicfDot11DataRateConfigTable,,not-accessible,,current,,Table will provide data rate configuration for a specific radio type.
.1.3.6.1.4.1.11.2.14.11.15.2.75.4.5.1.1,HPN-ICF-DOT11-CFG-MIB::hpnicfDot11DataRateConfigEntry,,not-accessible,hpnicfDot11RadioTypeID,current,,Each entry of the table will provide data rate configuration for a specific radio type.
.1.3.6.1.4.1.11.2.14.11.15.2.75.4.5.1.1.1,HPN-ICF-DOT11-CFG-MIB::hpnicfDot11RadioTypeID,INTEGER,not-accessible,,current,dot11a(1):dot11b(2):dot11g(4):dot11n(8):dot11gn(16):dot11an(32):dot11ac(64),Represents the radio type.
.1.3.6.1.4.1.11.2.14.11.15.2.75.4.5.1.1.2,HPN-ICF-DOT11-CFG-MIB::hpnicfDot11SupportedRateSet,OCTET,read-write,,current,,Represents the supported rate set of a particular radio type.
.1.3.6.1.4.1.11.2.14.11.15.2.75.4.5.1.1.3,HPN-ICF-DOT11-CFG-MIB::hpnicfDot11MandatoryRateSet,OCTET,read-write,,current,,Represents the mandatory rate set of a particular radio type.
.1.3.6.1.4.1.11.2.14.11.15.2.75.4.5.1.1.4,HPN-ICF-DOT11-CFG-MIB::hpnicfDot11DisabledRateSet,OCTET,read-write,,current,,Represents the disabled rate set of a particular radio type.
.1.3.6.1.4.1.11.2.14.11.15.2.75.4.5.1.1.5,HPN-ICF-DOT11-CFG-MIB::hpnicfDot11SmartRateSet,OCTET,read-write,,current,,Represents the rate set of a particular radio type.
.1.3.6.1.4.1.11.2.14.11.15.2.75.4.6,HPN-ICF-DOT11-CFG-MIB::hpnicfDot11InterfaceConfigGroup,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.2.75.4.6.1,HPN-ICF-DOT11-CFG-MIB::hpnicfDot11WlanEssIfTable,,not-accessible,,current,,This table is used to configure WLAN ESS interface.
.1.3.6.1.4.1.11.2.14.11.15.2.75.4.6.1.1,HPN-ICF-DOT11-CFG-MIB::hpnicfDot11WlanEssIfEntry,,not-accessible,hpnicfDot11WlanEssIfNumber,current,,Each entry contains the WLAN ESS interface configuration.
.1.3.6.1.4.1.11.2.14.11.15.2.75.4.6.1.1.1,HPN-ICF-DOT11-CFG-MIB::hpnicfDot11WlanEssIfNumber,Integer32,not-accessible,,current,,This node represents the WLAN ESS interface number.
.1.3.6.1.4.1.11.2.14.11.15.2.75.4.6.1.1.2,HPN-ICF-DOT11-CFG-MIB::hpnicfDot11WlanEssIfIndex,Integer32,read-only,,current,,This node represents the ifIndex of WLAN-ESS interface.
.1.3.6.1.4.1.11.2.14.11.15.2.75.4.6.1.1.3,HPN-ICF-DOT11-CFG-MIB::hpnicfDot11WlanEssRowStatus,INTEGER,read-create,,current,active(1):notInService(2):notReady(3):createAndGo(4):createAndWait(5):destroy(6),This node represents the WLAN ESS interface row status.
.1.3.6.1.4.1.11.2.14.11.15.2.75.4.6.2,HPN-ICF-DOT11-CFG-MIB::hpnicfDot11WlanBssIfTable,,not-accessible,,current,,This table is used to configure WLAN BSS interface.
.1.3.6.1.4.1.11.2.14.11.15.2.75.4.6.2.1,HPN-ICF-DOT11-CFG-MIB::hpnicfDot11WlanBssIfEntry,,not-accessible,hpnicfDot11WlanBssIfNumber,current,,Each entry contains the WLAN BSS interface configuration.
.1.3.6.1.4.1.11.2.14.11.15.2.75.4.6.2.1.1,HPN-ICF-DOT11-CFG-MIB::hpnicfDot11WlanBssIfNumber,Integer32,not-accessible,,current,,This node represents the WLAN BSS interface number.
.1.3.6.1.4.1.11.2.14.11.15.2.75.4.6.2.1.2,HPN-ICF-DOT11-CFG-MIB::hpnicfDot11WlanBssIfIndex,Integer32,read-only,,current,,This node represents the ifIndex of WLAN-BSS interface.
.1.3.6.1.4.1.11.2.14.11.15.2.75.4.6.2.1.3,HPN-ICF-DOT11-CFG-MIB::hpnicfDot11WlanBssRowStatus,INTEGER,read-create,,current,active(1):notInService(2):notReady(3):createAndGo(4):createAndWait(5):destroy(6),This node represents the WLAN BSS interface row status.
.1.3.6.1.4.1.11.2.14.11.15.2.75.4.6.3,HPN-ICF-DOT11-CFG-MIB::hpnicfDot11WLANEthernetIfTable,,not-accessible,,current,,This table is used to configure WLAN Ethernet interface.
.1.3.6.1.4.1.11.2.14.11.15.2.75.4.6.3.1,HPN-ICF-DOT11-CFG-MIB::hpnicfDot11WLANEthernetIfEntry,,not-accessible,hpnicfDot11WlanEthernetIfNumber,current,,Each entry contains the WLAN Ethernet interface configuration.
.1.3.6.1.4.1.11.2.14.11.15.2.75.4.6.3.1.1,HPN-ICF-DOT11-CFG-MIB::hpnicfDot11WlanEthernetIfNumber,Integer32,not-accessible,,current,,This node represents the WLAN Ethernet interface number.
.1.3.6.1.4.1.11.2.14.11.15.2.75.4.6.3.1.2,HPN-ICF-DOT11-CFG-MIB::hpnicfDot11WLANEthernetIfIndex,Integer32,read-only,,current,,This node represents the ifIndex of WLAN-Ethernet interface.
.1.3.6.1.4.1.11.2.14.11.15.2.75.4.6.3.1.3,HPN-ICF-DOT11-CFG-MIB::hpnicfDot11WlanEthernetRowStatus,INTEGER,read-create,,current,active(1):notInService(2):notReady(3):createAndGo(4):createAndWait(5):destroy(6),This node represents the Wlan Ethernet interface row status.
.1.3.6.1.4.1.11.2.14.11.15.2.75.4.6.4,HPN-ICF-DOT11-CFG-MIB::hpnicfDot11PortSecurityTable,,not-accessible,,current,,This table defines the WLAN security status for ESS, BSS, mesh and WLAN-Ethernet interface which binding the crypto service-template. Otherwise, when binding the clear service-template, hpnicfPortSecurityTables should be used to configure port security.
.1.3.6.1.4.1.11.2.14.11.15.2.75.4.6.4.1,HPN-ICF-DOT11-CFG-MIB::hpnicfDot11PortSecurityEntry,,not-accessible,ifIndex,current,,There is a row in this table for each ESS, BSS and WLAN-Ethernet interface.It is indexed using the object ifIndex in RFC1213-MIB.
.1.3.6.1.4.1.11.2.14.11.15.2.75.4.6.4.1.1,HPN-ICF-DOT11-CFG-MIB::hpnicfDot11PortSecurityMode,INTEGER,read-write,,current,noRestrictions(1):userLoginSecureExt(2):psk(3):macAddressAndPsk(4):userLoginSecureExtOrPsk(5):ext(6),Determines the security modes of the WLAN port. noRestrictions - The default value,no any security mode is set. userLoginSecureExt - Access to the port is denied until the port client is authorized (by 802.1X). psk - Access to the port is denied until the port client is authorized (by 802.1X key negotiation). macAddressAndPsk - The MAC address is first authenticated and only if this succeeds does the psk then attempt user authentication. userLoginSecureExtOrPsk - This selects both the userLoginSecureExt and psk modes together such that either is allowed to authorized access. Which mode works for client depends on the client's choice. ext - Access to the port is denied until the port client is authenticated (by ext). 
.1.3.6.1.4.1.11.2.14.11.15.2.75.4.6.4.1.2,HPN-ICF-DOT11-CFG-MIB::hpnicfDot11SecurityUserLoginTxKeyType,INTEGER,read-write,,current,userLoginTxKeyTypeNone(1):userLoginTxKeyTypeDot11Key(2):userLoginTxKeyTypeRsaRC4Key(3),This indicates the key type in the 802.1X EAPOL_Key packet. userLoginTxKeyTypeNone - This means the key type is not set yet. userLoginTxKeyTypeDot11Key - This selects the 802.11 key type. userLoginTxKeyTypeRsaRC4Key - This selects the RC4 key for RSA RC4 session encryption.
.1.3.6.1.4.1.11.2.14.11.15.2.75.4.6.4.1.3,HPN-ICF-DOT11-CFG-MIB::hpnicfDot11SecurityPskKeyMode,INTEGER,read-write,,current,pskKeyModeNone(1):pskKeyModePassPhrase(2):pskKeyModeRawKey(3),This is the password input mode. When input as pskKeyModePassPhrase, hpnicfDot11SecurePskKeyString must be 8 to 63 characters; when input as pskKeyModeRawKey, hpnicfDot11SecurePskKeyString must be 64 characters and each character must be '0'-'9', 'a'-'f' and 'A'-'F'.
.1.3.6.1.4.1.11.2.14.11.15.2.75.4.6.4.1.4,HPN-ICF-DOT11-CFG-MIB::hpnicfDot11SecurityPskKeyString,OCTET,read-write,,current,,This is the password string used for psk authentication.
.1.3.6.1.4.1.11.2.14.11.15.2.75.4.6.5,HPN-ICF-DOT11-CFG-MIB::hpnicfDot11WlanMeshIfTable,,not-accessible,,current,,This table is used to configure WLAN mesh interface.
.1.3.6.1.4.1.11.2.14.11.15.2.75.4.6.5.1,HPN-ICF-DOT11-CFG-MIB::hpnicfDot11WlanMeshIfEntry,,not-accessible,hpnicfDot11WlanMeshIfNumber,current,,Each entry contains the WLAN mesh interface configuration.
.1.3.6.1.4.1.11.2.14.11.15.2.75.4.6.5.1.1,HPN-ICF-DOT11-CFG-MIB::hpnicfDot11WlanMeshIfNumber,Integer32,not-accessible,,current,,This node represents the WLAN mesh interface number.
.1.3.6.1.4.1.11.2.14.11.15.2.75.4.6.5.1.2,HPN-ICF-DOT11-CFG-MIB::hpnicfDot11WlanMeshIfIndex,Integer32,read-only,,current,,This node represents the index of WLAN mesh interface.
.1.3.6.1.4.1.11.2.14.11.15.2.75.4.6.5.1.3,HPN-ICF-DOT11-CFG-MIB::hpnicfDot11WlanMeshRowStatus,INTEGER,read-create,,current,active(1):notInService(2):notReady(3):createAndGo(4):createAndWait(5):destroy(6),This node represents the WLAN mesh interface row status.
.1.3.6.1.4.1.11.2.14.11.15.2.75.4.7,HPN-ICF-DOT11-CFG-MIB::hpnicfDot11ACBackupGroup,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.2.75.4.7.1,HPN-ICF-DOT11-CFG-MIB::hpnicfDot11BackupACAdrssIP,OCTET,read-write,,current,,This object represents the backup AC IP address. If the backup AC IP address is not configured, the object value is 0.0.0.0.
.1.3.6.1.4.1.11.2.14.11.15.2.75.4.7.2,HPN-ICF-DOT11-CFG-MIB::hpnicfDot11BackupACAdrssIPv6,OCTET,read-write,,current,,This object represents the backup AC IPv6 address. If the backup AC IPv6 address is not configured, the object value is 0::0.
.1.3.6.1.4.1.11.2.14.11.15.2.75.4.8,HPN-ICF-DOT11-CFG-MIB::hpnicfDot11RadioElementConfigGroup,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.2.75.4.8.1,HPN-ICF-DOT11-CFG-MIB::hpnicfDot11nRadioCfgTable,,not-accessible,,current,,This table is used to configure dot11n on the radio.
.1.3.6.1.4.1.11.2.14.11.15.2.75.4.8.1.1,HPN-ICF-DOT11-CFG-MIB::hpnicfDot11nRadioCfgEntry,,not-accessible,hpnicfDot11nRadioCfgIndex,current,,This entry contains the dot11n configuration on the radio.
.1.3.6.1.4.1.11.2.14.11.15.2.75.4.8.1.1.1,HPN-ICF-DOT11-CFG-MIB::hpnicfDot11nRadioCfgIndex,Unsigned32,not-accessible,,current,,Represents index of the radio.
.1.3.6.1.4.1.11.2.14.11.15.2.75.4.8.1.1.2,HPN-ICF-DOT11-CFG-MIB::hpnicfDot11nAMpduEnable,INTEGER,read-write,,current,true(1):false(2),Enable the function of A-MPDU.
.1.3.6.1.4.1.11.2.14.11.15.2.75.4.8.1.1.3,HPN-ICF-DOT11-CFG-MIB::hpnicfDot11nAMsduEnable,INTEGER,read-write,,current,true(1):false(2),Enable the function of A-MSDU.
.1.3.6.1.4.1.11.2.14.11.15.2.75.4.8.1.1.4,HPN-ICF-DOT11-CFG-MIB::hpnicfDot11nClientDot11nOnly,INTEGER,read-write,,current,true(1):false(2),If radio type is 802.11an or 802.11gn, only permit clients of 11n mode. If radio type is 802.11ac, permit clients of 11n and 11ac mode.
.1.3.6.1.4.1.11.2.14.11.15.2.75.4.8.1.1.5,HPN-ICF-DOT11-CFG-MIB::hpnicfDot11nChanelBand,INTEGER,read-write,,current,mode20(1):mode40(2):mode80(3),Specify the bandwidth mode.
.1.3.6.1.4.1.11.2.14.11.15.2.75.4.8.1.1.6,HPN-ICF-DOT11-CFG-MIB::hpnicfDot11nShortGiEnable,INTEGER,read-write,,current,true(1):false(2),The function of Short GI.
.1.3.6.1.4.1.11.2.14.11.15.2.75.4.8.1.1.7,HPN-ICF-DOT11-CFG-MIB::hpnicfDot11nClientDot11acOnly,INTEGER,read-write,,current,true(1):false(2),Only permit clients of 11ac mode.
.1.3.6.1.4.1.11.2.14.11.15.2.75.4.8.2,HPN-ICF-DOT11-CFG-MIB::hpnicfDot11RadioWDSTable,,not-accessible,,current,,This table is used to configure WDS on the radio.
.1.3.6.1.4.1.11.2.14.11.15.2.75.4.8.2.1,HPN-ICF-DOT11-CFG-MIB::hpnicfDot11RadioWDSEntry,,not-accessible,hpnicfDot11RadioWDSIndex,current,,Each entry contains the WDS configuration on the radio.
.1.3.6.1.4.1.11.2.14.11.15.2.75.4.8.2.1.1,HPN-ICF-DOT11-CFG-MIB::hpnicfDot11RadioWDSIndex,Unsigned32,not-accessible,,current,,Represents the element index of radio.
.1.3.6.1.4.1.11.2.14.11.15.2.75.4.8.2.1.2,HPN-ICF-DOT11-CFG-MIB::hpnicfDot11RadioWDSMode,INTEGER,read-write,,current,nowds(1):wds(2),Represents enable the WDS mode or not. nowds: The WDS mode is disabled. wds : The WDS mode is enabled
.1.3.6.1.4.1.11.2.14.11.15.2.75.4.8.2.1.3,HPN-ICF-DOT11-CFG-MIB::hpnicfDot11RadioWDSNetWorkID,OCTET,read-write,,current,,Represents the mesh ID of WDS.
.1.3.6.1.4.1.11.2.14.11.15.2.75.4.8.2.1.4,HPN-ICF-DOT11-CFG-MIB::hpnicfDot11WDSSecPskKeyMode,INTEGER,read-write,,current,pskKeyModeNone(1):pskKeyModePassPhrase(2):pskKeyModeRawKey(3),Represents the PSK mode of WDS.
.1.3.6.1.4.1.11.2.14.11.15.2.75.4.8.2.1.5,HPN-ICF-DOT11-CFG-MIB::hpnicfDot11WDSSecPskKeyString,OCTET,read-write,,current,,Represents the PSK value of WDS.
.1.3.6.1.4.1.11.2.14.11.15.2.75.4.8.3,HPN-ICF-DOT11-CFG-MIB::hpnicfDot11nRadioCfg2Table,,not-accessible,,current,,This table is used to configure dot11n on the radio.
.1.3.6.1.4.1.11.2.14.11.15.2.75.4.8.3.1,HPN-ICF-DOT11-CFG-MIB::hpnicfDot11nRadioCfg2Entry,,not-accessible,hpnicfDot11nRadioCfg2APIDIndex:hpnicfDot11nRadioCfg2RadioIDIndex,current,,This entry contains the dot11n configuration on the radio.
.1.3.6.1.4.1.11.2.14.11.15.2.75.4.8.3.1.1,HPN-ICF-DOT11-CFG-MIB::hpnicfDot11nRadioCfg2APIDIndex,OCTET,not-accessible,,current,,Represents index of the AP.
.1.3.6.1.4.1.11.2.14.11.15.2.75.4.8.3.1.2,HPN-ICF-DOT11-CFG-MIB::hpnicfDot11nRadioCfg2RadioIDIndex,Integer32,not-accessible,,current,,Represents index of the radio.
.1.3.6.1.4.1.11.2.14.11.15.2.75.4.8.3.1.3,HPN-ICF-DOT11-CFG-MIB::hpnicfDot11nRadioCfg2AMpduEnable,INTEGER,read-write,,current,true(1):false(2),Enable the function of A-MPDU.
.1.3.6.1.4.1.11.2.14.11.15.2.75.4.8.3.1.4,HPN-ICF-DOT11-CFG-MIB::hpnicfDot11nRadioCfg2AMsduEnable,INTEGER,read-write,,current,true(1):false(2),Enable the function of A-MSDU.
.1.3.6.1.4.1.11.2.14.11.15.2.75.4.8.3.1.5,HPN-ICF-DOT11-CFG-MIB::hpnicfDot11nRadioCfg2ClientDot11nOnly,INTEGER,read-write,,current,true(1):false(2),If radio type is 802.11an or 802.11gn, only permit clients of 11n mode. If radio type is 802.11ac, permit clients of 11n and 11ac mode.
.1.3.6.1.4.1.11.2.14.11.15.2.75.4.8.3.1.6,HPN-ICF-DOT11-CFG-MIB::hpnicfDot11nRadioCfg2ChannelBand,INTEGER,read-write,,current,mode20(1):mode40(2):mode80(3),Specify the bandwidth mode.
.1.3.6.1.4.1.11.2.14.11.15.2.75.4.8.3.1.7,HPN-ICF-DOT11-CFG-MIB::hpnicfDot11nRadioCfg2ShortGiEnable,INTEGER,read-write,,current,true(1):false(2),Enable the function of Short GI.
.1.3.6.1.4.1.11.2.14.11.15.2.75.4.8.3.1.8,HPN-ICF-DOT11-CFG-MIB::hpnicfDot11nRadioCfg2AMpduEnableCM,INTEGER,read-write,,current,off(0):on(1),Enable the function of A-MPDU.
.1.3.6.1.4.1.11.2.14.11.15.2.75.4.8.3.1.9,HPN-ICF-DOT11-CFG-MIB::hpnicfDot11nRadioCfg2ChannelBandCM,INTEGER,read-write,,current,mode40(1):mode20(2),Specify the bandwidth mode.
.1.3.6.1.4.1.11.2.14.11.15.2.75.4.8.3.1.10,HPN-ICF-DOT11-CFG-MIB::hpnicfDot11nRadioCfg2ShortGiEnableCM,INTEGER,read-write,,current,off(0):on(1),Enable the function of Short GI.
.1.3.6.1.4.1.11.2.14.11.15.2.75.4.8.3.1.11,HPN-ICF-DOT11-CFG-MIB::hpnicfDot11nRadioCfg2ClientDot11acOnly,INTEGER,read-write,,current,true(1):false(2),Only permit clients of 11ac mode.
.1.3.6.1.4.1.11.2.14.11.15.2.75.4.8.3.1.12,HPN-ICF-DOT11-CFG-MIB::hpnicfDot11nRadioCfg2ClientDot11nOnlyCM,INTEGER,read-write,,current,dot11false(0):dot11true(1),If radio type is 802.11an or 802.11gn, permit only clients of 11n mode. If radio type is 802.11ac, permit clients of both 11n and 11ac mode.
.1.3.6.1.4.1.11.2.14.11.15.2.75.4.9,HPN-ICF-DOT11-CFG-MIB::hpnicfDot11CfgNotifyGroup,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.2.75.4.9.0,HPN-ICF-DOT11-CFG-MIB::hpnicfDot11CfgNotifications,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.2.75.4.9.0.1,HPN-ICF-DOT11-CFG-MIB::hpnicfDot11CfgCipherChange,,,,,,This notification is sent when cipher type of corresponding service template is changed.
.1.3.6.1.4.1.11.2.14.11.15.2.75.4.9.0.2,HPN-ICF-DOT11-CFG-MIB::hpnicfDot11CfgPSKChange,,,,,,This notification is sent when pre-shared key of corresponding service template is changed.
.1.3.6.1.4.1.11.2.14.11.15.2.75.4.9.0.3,HPN-ICF-DOT11-CFG-MIB::hpnicfDot11SSIDWepIDConflictTrap,,,,,,This notification will be sent when the same wep ID is configured on two service policies.
.1.3.6.1.4.1.11.2.14.11.15.2.75.4.9.1,HPN-ICF-DOT11-CFG-MIB::hpnicfDot11CfgTrapVarObjects,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.2.75.4.9.1.1,HPN-ICF-DOT11-CFG-MIB::hpnicfDot11PreConflictTemplateNum,Integer32,accessible-for-notify,,current,,Represents previous service policy ID when radio bind service policy and current service policy conflict with previous service policy in cipher configuration.
.1.3.6.1.4.1.11.2.14.11.15.2.75.4.9.1.2,HPN-ICF-DOT11-CFG-MIB::hpnicfDot11CurrConflictTemplateNum,Integer32,accessible-for-notify,,current,,Represents current service policy ID when radio bind service policy and current service policy conflict with previous service policy in cipher configuration.
.1.3.6.1.4.1.11.2.14.11.15.2.75.4.9.1.3,HPN-ICF-DOT11-CFG-MIB::hpnicfDot11ConflictCipherIdx,Integer32,accessible-for-notify,,current,,Represents wep ID that conflicted with.
.1.3.6.1.4.1.11.2.14.11.15.2.75.4.9.1.4,HPN-ICF-DOT11-CFG-MIB::hpnicfDot11ConfigureAPID,OCTET,accessible-for-notify,,current,,Represents which AP is configured.
.1.3.6.1.4.1.11.2.14.11.15.2.75.4.9.1.5,HPN-ICF-DOT11-CFG-MIB::hpnicfDot11ConfigureRadioID,Integer32,accessible-for-notify,,current,,Represents which radio in AP is configured.
.1.3.6.1.4.1.11.2.14.11.15.2.75.4.9.1.6,HPN-ICF-DOT11-CFG-MIB::hpnicfDot11ConfigureAPMacAddress,OCTET,accessible-for-notify,,current,,Represents MAC Address of AP.
.1.3.6.1.4.1.11.2.14.11.15.2.75.5,HPN-ICF-DOT11-WIDS-MIB::hpnicfDot11WIDS,,,,,,This MIB provides information about WIDS feature. GLOSSARY Wireless Intrusion Detection Sensor (WIDS) WIDS is designed to be employed in an area that is serviced by an existing wireless network. It aids in the early detection of malicious outsider attacks and intrusions via wireless networks. Rogue AP A rogue access point is any Wi-Fi access point connected to the network without authorization. As it is not authorized, if there is any weakness in the AP, the hacker will have chance to compromise the network. Rogue Station It is similiar to Rogue AP, while it is a station. Monitor AP An AP will scan or listen to the air, and try to detect wireless attack in the network. Some AP products will work only in monitor role, while some AP products could switch between normal AP role (only provide wireless access service)and monitor AP role. Ad Hoc Mode Station could work under Ad hoc mode, then they could directly do peer-to-peer communication without other device support.
.1.3.6.1.4.1.11.2.14.11.15.2.75.5.1,HPN-ICF-DOT11-WIDS-MIB::hpnicfDot11WIDSConfigGroup,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.2.75.5.1.1,HPN-ICF-DOT11-WIDS-MIB::hpnicfDot11WIDSGlobalConfigGroup,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.2.75.5.1.1.1,HPN-ICF-DOT11-WIDS-MIB::hpnicfDot11WIDSScanMode,INTEGER,read-write,,current,all(1):auto(2),Represents the scope of channels to be scanned. The following value are supported all(1) - Do scan on all the channels. auto(2) - Do scan for the channels that automatically selected by WIDS.
.1.3.6.1.4.1.11.2.14.11.15.2.75.5.1.1.2,HPN-ICF-DOT11-WIDS-MIB::hpnicfDot11WIDSScanChannelList,OCTET,read-write,,obsolete,,Represents the channel scope to be scanned when hpnicfDot11WIDSScanMode is configurated as channelSpec mode. Each channel value will be separated by comma character.
.1.3.6.1.4.1.11.2.14.11.15.2.75.5.1.1.3,HPN-ICF-DOT11-WIDS-MIB::hpnicfDot11CntMsrMode,BITS,read-write,,current,rogue(0):adhoc(1):config(2),Represents the countermeasures mode.
.1.3.6.1.4.1.11.2.14.11.15.2.75.5.1.1.4,HPN-ICF-DOT11-WIDS-MIB::hpnicfDot11DevAgingTime,Integer32,read-write,,current,,Represents the age time for entries in the detected device table. If an entry is not detected within the interval, it is deleted from the detected device table. If the deleted entry is that of a rogue, it is added into the rogue history table.
.1.3.6.1.4.1.11.2.14.11.15.2.75.5.1.1.5,HPN-ICF-DOT11-WIDS-MIB::hpnicfDot11DynBlkListEnable,INTEGER,read-write,,current,true(1):false(2),Represents whether the dynamic blacklist feature is enabled or not. 'true' : Enable the dynamic blacklist feature to filter out unwanted clients, which will not get associated. 'false' : Disable the dynamic blacklist feature.
.1.3.6.1.4.1.11.2.14.11.15.2.75.5.1.1.6,HPN-ICF-DOT11-WIDS-MIB::hpnicfDot11DynBlkListLifeTime,Integer32,read-write,,current,,Represents the lifetime for dynamic blacklist entries. If a dynamic blacklist entry is not detected within the lifetime, the entry will be removed from the dynamic blacklist. The lifetime becomes active only if dynamic blacklist feature is enabled.
.1.3.6.1.4.1.11.2.14.11.15.2.75.5.1.1.7,HPN-ICF-DOT11-WIDS-MIB::hpnicfDot11FloodAtkDctEnable,INTEGER,read-write,,current,true(1):false(2),Represents whether detection of flood attack is enabled or not. 'true' : Enable the detection of flood attack. 'false' : Disable the detection of flood attack.
.1.3.6.1.4.1.11.2.14.11.15.2.75.5.1.1.8,HPN-ICF-DOT11-WIDS-MIB::hpnicfDot11SpoofAtkDctEnable,INTEGER,read-write,,current,true(1):false(2),Represents whether detection of Spoof attack is enabled or not. 'true' : Enable the detection of Spoof attack. 'false' : Disable the detection of Spoof attack.
.1.3.6.1.4.1.11.2.14.11.15.2.75.5.1.1.9,HPN-ICF-DOT11-WIDS-MIB::hpnicfDot11WeakIVAtkDctEnable,INTEGER,read-write,,current,true(1):false(2),Represents whether detection of weak-iv attack is enabled or not. 'true' : Enable the detection of weak-iv attack. 'false' : Disable the detection of weak-iv attack.
.1.3.6.1.4.1.11.2.14.11.15.2.75.5.1.1.10,HPN-ICF-DOT11-WIDS-MIB::hpnicfDot11ResetWIDSRogueHistory,INTEGER,read-write,,current,true(1):false(2),This object is used to clear all entries from the rogue history table. It will return false for get operation.
.1.3.6.1.4.1.11.2.14.11.15.2.75.5.1.1.11,HPN-ICF-DOT11-WIDS-MIB::hpnicfDot11ResetWIDSHistroy,INTEGER,read-write,,current,true(1):false(2),This object is used to clear the history information of attacks detected in the WLAN system. It will return false for get operation.
.1.3.6.1.4.1.11.2.14.11.15.2.75.5.1.1.12,HPN-ICF-DOT11-WIDS-MIB::hpnicfDot11ResetWIDSStatistics,INTEGER,read-write,,current,true(1):false(2),This object is used to clear the statistics of attacks detected in the WLAN system. It will return false for get operation.
.1.3.6.1.4.1.11.2.14.11.15.2.75.5.1.1.13,HPN-ICF-DOT11-WIDS-MIB::hpnicfDot11ResetAllDynBlkList,INTEGER,read-write,,current,true(1):false(2),This object is used to remove all entries from the dynamic blacklist. It will return false for get operation.
.1.3.6.1.4.1.11.2.14.11.15.2.75.5.1.1.14,HPN-ICF-DOT11-WIDS-MIB::hpnicfDot11ResetAllStcBlkList,INTEGER,read-write,,current,true(1):false(2),This object is used to remove all entries from the static blacklist. It will return false for get operation.
.1.3.6.1.4.1.11.2.14.11.15.2.75.5.1.1.15,HPN-ICF-DOT11-WIDS-MIB::hpnicfDot11ResetAllWhtBlkList,INTEGER,read-write,,current,true(1):false(2),This object is used to remove all entries from the static whitelist. It will return false for get operation.
.1.3.6.1.4.1.11.2.14.11.15.2.75.5.1.1.16,HPN-ICF-DOT11-WIDS-MIB::hpnicfDot11ResetAllDctRogueAP,INTEGER,read-write,,current,true(1):false(2),This object is used to clear the information of all detected rogue APs. It will return false for get operation.
.1.3.6.1.4.1.11.2.14.11.15.2.75.5.1.1.17,HPN-ICF-DOT11-WIDS-MIB::hpnicfDot11ResetAllDctRogueSta,INTEGER,read-write,,current,true(1):false(2),This object is used to clear the information of all detected rogue clients. It will return false for get operation.
.1.3.6.1.4.1.11.2.14.11.15.2.75.5.1.1.18,HPN-ICF-DOT11-WIDS-MIB::hpnicfDot11ResetAllDctAdhoc,INTEGER,read-write,,current,true(1):false(2),This object is used to clear the information of all detected ad hoc devices. It will return false for get operation.
.1.3.6.1.4.1.11.2.14.11.15.2.75.5.1.1.19,HPN-ICF-DOT11-WIDS-MIB::hpnicfDot11ResetAllDctDevice,INTEGER,read-write,,current,true(1):false(2),This object is used to clear the information of all detected devices. It will return false for get operation.
.1.3.6.1.4.1.11.2.14.11.15.2.75.5.1.1.20,HPN-ICF-DOT11-WIDS-MIB::hpnicfDot11ResetAllDctSSID,INTEGER,read-write,,current,true(1):false(2),This object is used to clear the information of all detected SSIDs. It will return false for get operation.
.1.3.6.1.4.1.11.2.14.11.15.2.75.5.1.1.21,HPN-ICF-DOT11-WIDS-MIB::hpnicfDot11WidsFloodInterval,Unsigned32,read-write,,current,,The interval of WIDS flood detection.
.1.3.6.1.4.1.11.2.14.11.15.2.75.5.1.1.22,HPN-ICF-DOT11-WIDS-MIB::hpnicfDot11WidsBlackListThreshold,Unsigned32,read-write,,current,,When flood attack exceeds the value of this node, the MAC address will be added into black list.
.1.3.6.1.4.1.11.2.14.11.15.2.75.5.1.1.23,HPN-ICF-DOT11-WIDS-MIB::hpnicfDot11SSIDFilterOnOff,INTEGER,read-write,,current,on(1):off(2),Represents whether the SSID permit feature is enabled or not.
.1.3.6.1.4.1.11.2.14.11.15.2.75.5.1.1.24,HPN-ICF-DOT11-WIDS-MIB::hpnicfDot11BSSIDFilterOnOff,INTEGER,read-write,,current,on(1):off(2),Represents whether the BSSID permit feature is enabled or not.
.1.3.6.1.4.1.11.2.14.11.15.2.75.5.1.2,HPN-ICF-DOT11-WIDS-MIB::hpnicfDot11WIDSPermitVendorTable,,not-accessible,,current,,The table provides the permitted vendor list, and each vendor will be identified by OUI. The legal device should be made by the permitted vendors.
.1.3.6.1.4.1.11.2.14.11.15.2.75.5.1.2.1,HPN-ICF-DOT11-WIDS-MIB::hpnicfDot11WIDSPermitVendorEntry,,not-accessible,hpnicfDot11VendorOUI,current,,Each entry provides the information of permitted vendor.
.1.3.6.1.4.1.11.2.14.11.15.2.75.5.1.2.1.1,HPN-ICF-DOT11-WIDS-MIB::hpnicfDot11VendorOUI,OCTET,not-accessible,,current,,Represents the vendor OUI information of the wireless device.
.1.3.6.1.4.1.11.2.14.11.15.2.75.5.1.2.1.2,HPN-ICF-DOT11-WIDS-MIB::hpnicfDot11PermitVendorRowStatus,INTEGER,read-create,,current,active(1):notInService(2):notReady(3):createAndGo(4):createAndWait(5):destroy(6),The status of this table entry.
.1.3.6.1.4.1.11.2.14.11.15.2.75.5.1.2.1.3,HPN-ICF-DOT11-WIDS-MIB::hpnicfDot11VendorName,OCTET,read-only,,current,,Represents the vendor name of the wireless device.
.1.3.6.1.4.1.11.2.14.11.15.2.75.5.1.3,HPN-ICF-DOT11-WIDS-MIB::hpnicfDot11WIDSPermitSSIDTable,,not-accessible,,current,,The table represents the list of SSID could be permitted in the wireless network.
.1.3.6.1.4.1.11.2.14.11.15.2.75.5.1.3.1,HPN-ICF-DOT11-WIDS-MIB::hpnicfDot11WIDSPermitSSIDEntry,,not-accessible,hpnicfDot11PermitSSID,current,,Each entry provides the information of permitted SSID.
.1.3.6.1.4.1.11.2.14.11.15.2.75.5.1.3.1.1,HPN-ICF-DOT11-WIDS-MIB::hpnicfDot11PermitSSID,OCTET,not-accessible,,current,,Represents the permitted SSID in the wireless network.
.1.3.6.1.4.1.11.2.14.11.15.2.75.5.1.3.1.2,HPN-ICF-DOT11-WIDS-MIB::hpnicfDot11PermitSSIDRowStatus,INTEGER,read-create,,current,active(1):notInService(2):notReady(3):createAndGo(4):createAndWait(5):destroy(6),The status of this table entry.
.1.3.6.1.4.1.11.2.14.11.15.2.75.5.1.3.1.3,HPN-ICF-DOT11-WIDS-MIB::hpnicfDot11PermitSSIDDetected,INTEGER,read-only,,current,true(1):false(2),Represents whether the permitted SSID is detected or not.
.1.3.6.1.4.1.11.2.14.11.15.2.75.5.1.4,HPN-ICF-DOT11-WIDS-MIB::hpnicfDot11WIDSIgnoreListTable,,not-accessible,,current,,The table provides the MAC address list of stations or APs, and WIDS always take them as legal stations or APs.
.1.3.6.1.4.1.11.2.14.11.15.2.75.5.1.4.1,HPN-ICF-DOT11-WIDS-MIB::hpnicfDot11WIDSIgnoreListEntry,,not-accessible,hpnicfDot11IgnoreMAC,current,,Each entry contains the MAC address of station or AP, and WIDS always take it as legal station or AP.
.1.3.6.1.4.1.11.2.14.11.15.2.75.5.1.4.1.1,HPN-ICF-DOT11-WIDS-MIB::hpnicfDot11IgnoreMAC,OCTET,not-accessible,,current,,Represents the MAC address of station or AP, and WIDS always take it as legal station or AP.
.1.3.6.1.4.1.11.2.14.11.15.2.75.5.1.4.1.2,HPN-ICF-DOT11-WIDS-MIB::hpnicfDot11IgnoreListRowStatus,INTEGER,read-create,,current,active(1):notInService(2):notReady(3):createAndGo(4):createAndWait(5):destroy(6),The status of this table entry.
.1.3.6.1.4.1.11.2.14.11.15.2.75.5.1.4.1.3,HPN-ICF-DOT11-WIDS-MIB::hpnicfDot11IgnoreMACDetected,INTEGER,read-only,,current,true(1):false(2),Represents whether the MAC address detected or not.
.1.3.6.1.4.1.11.2.14.11.15.2.75.5.1.4.1.4,HPN-ICF-DOT11-WIDS-MIB::hpnicfDot11IgnoreDevType,INTEGER,read-only,,current,client(1):ap(2):adhoc(3):wirelessBridge(4):unknown(5),Represents the type of the MAC address detected. The value of this object always is unknown if the MAC address is not detected.
.1.3.6.1.4.1.11.2.14.11.15.2.75.5.1.5,HPN-ICF-DOT11-WIDS-MIB::hpnicfDot11WIDSAttackListTable,,not-accessible,,current,,The table provides the MAC address list of rogue APs or rogue stations, the WIDS will take countermeasure as per the MAC address list.
.1.3.6.1.4.1.11.2.14.11.15.2.75.5.1.5.1,HPN-ICF-DOT11-WIDS-MIB::hpnicfDot11WIDSAttackListEntry,,not-accessible,hpnicfDot11AttackDeviceMac,current,,Each entry contains the MAC address of rogue AP or rogue station, and the countermeasure will be taken for it.
.1.3.6.1.4.1.11.2.14.11.15.2.75.5.1.5.1.1,HPN-ICF-DOT11-WIDS-MIB::hpnicfDot11AttackDeviceMac,OCTET,not-accessible,,current,,Represents the MAC address of rogue AP or rogue station, and the countermeasure will be taken for it.
.1.3.6.1.4.1.11.2.14.11.15.2.75.5.1.5.1.2,HPN-ICF-DOT11-WIDS-MIB::hpnicfDot11AttackListRowStatus,INTEGER,read-create,,current,active(1):notInService(2):notReady(3):createAndGo(4):createAndWait(5):destroy(6),The status of this table entry.
.1.3.6.1.4.1.11.2.14.11.15.2.75.5.1.5.1.3,HPN-ICF-DOT11-WIDS-MIB::hpnicfDot11AttackDevDetected,INTEGER,read-only,,current,true(1):false(2),Represents whether the assigned MAC address in attack list is detected or not.
.1.3.6.1.4.1.11.2.14.11.15.2.75.5.1.5.1.4,HPN-ICF-DOT11-WIDS-MIB::hpnicfDot11AttackDevType,INTEGER,read-only,,current,client(1):ap(2):adhoc(3):wirelessBridge(4):unknown(5),Represents the type of detected MAC address in attack list. If the MAC address is not detected, it will return unknown(5) for get operation.
.1.3.6.1.4.1.11.2.14.11.15.2.75.5.1.6,HPN-ICF-DOT11-WIDS-MIB::hpnicfDot11StaticWhiteListTable,,not-accessible,,current,,The table provides the information of whitelist.
.1.3.6.1.4.1.11.2.14.11.15.2.75.5.1.6.1,HPN-ICF-DOT11-WIDS-MIB::hpnicfDot11StaticWhiteListEntry,,not-accessible,hpnicfDot11StaticWhiteListMAC,current,,Each entry contains the information of whitelist.
.1.3.6.1.4.1.11.2.14.11.15.2.75.5.1.6.1.1,HPN-ICF-DOT11-WIDS-MIB::hpnicfDot11StaticWhiteListMAC,OCTET,not-accessible,,current,,Represents the MAC addresses in whitelist.
.1.3.6.1.4.1.11.2.14.11.15.2.75.5.1.6.1.2,HPN-ICF-DOT11-WIDS-MIB::hpnicfDot11StaticWhiteListRowStatus,INTEGER,read-create,,current,active(1):notInService(2):notReady(3):createAndGo(4):createAndWait(5):destroy(6),The status of this table entry.
.1.3.6.1.4.1.11.2.14.11.15.2.75.5.1.7,HPN-ICF-DOT11-WIDS-MIB::hpnicfDot11StaticBlackListTable,,not-accessible,,current,,The table provides the information of static blacklist.
.1.3.6.1.4.1.11.2.14.11.15.2.75.5.1.7.1,HPN-ICF-DOT11-WIDS-MIB::hpnicfDot11StaticBlackListEntry,,not-accessible,hpnicfDot11StaticBlackListMAC,current,,Each entry contains the information of static blacklist.
.1.3.6.1.4.1.11.2.14.11.15.2.75.5.1.7.1.1,HPN-ICF-DOT11-WIDS-MIB::hpnicfDot11StaticBlackListMAC,OCTET,not-accessible,,current,,Represents the MAC addresses in static blacklist.
.1.3.6.1.4.1.11.2.14.11.15.2.75.5.1.7.1.2,HPN-ICF-DOT11-WIDS-MIB::hpnicfDot11StaticBlackListRowStatus,INTEGER,read-create,,current,active(1):notInService(2):notReady(3):createAndGo(4):createAndWait(5):destroy(6),The status of this table entry.
.1.3.6.1.4.1.11.2.14.11.15.2.75.5.1.8,HPN-ICF-DOT11-WIDS-MIB::hpnicfDot11WIDSPermitBSSIDTable,,not-accessible,,current,,The table represents the list of BSSID could be permitted in the wireless network.
.1.3.6.1.4.1.11.2.14.11.15.2.75.5.1.8.1,HPN-ICF-DOT11-WIDS-MIB::hpnicfDot11WIDSPermitBSSIDEntry,,not-accessible,hpnicfDot11PermitBSSID,current,,Each entry provides the information of permitted BSSID.
.1.3.6.1.4.1.11.2.14.11.15.2.75.5.1.8.1.1,HPN-ICF-DOT11-WIDS-MIB::hpnicfDot11PermitBSSID,OCTET,not-accessible,,current,,Represents the permitted BSSID in the wireless network.
.1.3.6.1.4.1.11.2.14.11.15.2.75.5.1.8.1.2,HPN-ICF-DOT11-WIDS-MIB::hpnicfDot11PermitBSSIDDetected,INTEGER,read-only,,current,true(1):false(2),Represents whether the permitted BSSID is detected or not.
.1.3.6.1.4.1.11.2.14.11.15.2.75.5.1.8.1.3,HPN-ICF-DOT11-WIDS-MIB::hpnicfDot11PermitBSSIDRowStatus,INTEGER,read-create,,current,active(1):notInService(2):notReady(3):createAndGo(4):createAndWait(5):destroy(6),Represents the row status of permit BSSID table.
.1.3.6.1.4.1.11.2.14.11.15.2.75.5.2,HPN-ICF-DOT11-WIDS-MIB::hpnicfDot11WIDSDetectGroup,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.2.75.5.2.1,HPN-ICF-DOT11-WIDS-MIB::hpnicfDot11WIDSRogueAPTable,,not-accessible,,current,,The table represents the list of possible BSS information for rogue APs detected by the WIDS.
.1.3.6.1.4.1.11.2.14.11.15.2.75.5.2.1.1,HPN-ICF-DOT11-WIDS-MIB::hpnicfDot11WIDSRogueAPEntry,,not-accessible,hpnicfDot11RogueAPBSSMAC,current,,Each entry contains possible BSS information of each rogue AP detected by WIDS.
.1.3.6.1.4.1.11.2.14.11.15.2.75.5.2.1.1.1,HPN-ICF-DOT11-WIDS-MIB::hpnicfDot11RogueAPBSSMAC,OCTET,not-accessible,,current,,Represents the BSS MAC address of rogue AP.
.1.3.6.1.4.1.11.2.14.11.15.2.75.5.2.1.1.2,HPN-ICF-DOT11-WIDS-MIB::hpnicfDot11RogueAPVendorName,OCTET,read-only,,current,,Represents the vendor name of rogue AP.
.1.3.6.1.4.1.11.2.14.11.15.2.75.5.2.1.1.3,HPN-ICF-DOT11-WIDS-MIB::hpnicfDot11RogueAPMonitorNum,Integer32,read-only,,current,,Represents the number of monitor APs which detected the rogue AP.
.1.3.6.1.4.1.11.2.14.11.15.2.75.5.2.1.1.4,HPN-ICF-DOT11-WIDS-MIB::hpnicfDot11RogueAPFirstDetectTm,TimeTicks,read-only,,current,,Represents the time that AP was detected as a rogue AP for the first time.
.1.3.6.1.4.1.11.2.14.11.15.2.75.5.2.1.1.5,HPN-ICF-DOT11-WIDS-MIB::hpnicfDot11RogueAPLastDetectTm,TimeTicks,read-only,,current,,Represents the time that AP was detected as a rogue AP for the last time.
.1.3.6.1.4.1.11.2.14.11.15.2.75.5.2.1.1.6,HPN-ICF-DOT11-WIDS-MIB::hpnicfDot11RogueAPSSID,OCTET,read-only,,current,,Represents the SSID broadcasted by rogue AP.
.1.3.6.1.4.1.11.2.14.11.15.2.75.5.2.1.1.7,HPN-ICF-DOT11-WIDS-MIB::hpnicfDot11RogueAPMaxSigStrength,Integer32,read-only,,current,,Represents the maximal value of signal strength that WIDS received from the rogue AP.
.1.3.6.1.4.1.11.2.14.11.15.2.75.5.2.1.1.8,HPN-ICF-DOT11-WIDS-MIB::hpnicfDot11RogueAPChannel,Integer32,read-only,,current,,Represents on which radio channel of the rogue AP the maximal signal strength was received.
.1.3.6.1.4.1.11.2.14.11.15.2.75.5.2.1.1.9,HPN-ICF-DOT11-WIDS-MIB::hpnicfDot11RogueAPBeaconInterval,Integer32,read-only,,current,,Represents the interval for Beacon management frame of rogue AP.
.1.3.6.1.4.1.11.2.14.11.15.2.75.5.2.1.1.10,HPN-ICF-DOT11-WIDS-MIB::hpnicfDot11RogueAPAttackedStatus,INTEGER,read-only,,current,true(1):false(2),Represents whether the countermeasure have taken for the rogue AP.
.1.3.6.1.4.1.11.2.14.11.15.2.75.5.2.1.1.11,HPN-ICF-DOT11-WIDS-MIB::hpnicfDot11RogueAPToIgnore,INTEGER,read-write,,current,true(1):false(2),Represents whether the rogue AP will be taken as a rogue AP. If the value is true, NMS should not display the rogue AP as NMS display rogue AP list, and the MAC address will be automatically added into hpnicfDot11WIDSIgnoreListTable. If the value is false, NMS will take it as a rogue AP. 
.1.3.6.1.4.1.11.2.14.11.15.2.75.5.2.1.1.12,HPN-ICF-DOT11-WIDS-MIB::hpnicfDot11RogueAPEncryptStatus,INTEGER,read-only,,current,true(1):false(2),Represents whether the rogue AP encrypt the frame or not.
.1.3.6.1.4.1.11.2.14.11.15.2.75.5.2.1.1.13,HPN-ICF-DOT11-WIDS-MIB::hpnicfDot11RogueAPReset,INTEGER,read-write,,current,true(1):false(2),This object is used to clear information of assigned AP. The information of AP which detect assigned rogue AP will be cleared together. It will return false for get operation.
.1.3.6.1.4.1.11.2.14.11.15.2.75.5.2.1.1.14,HPN-ICF-DOT11-WIDS-MIB::hpnicfDot11RogueAPFirstDetectTmStr,OCTET,read-only,,current,,Represents the time that AP was detected as a rogue AP for the first time.
.1.3.6.1.4.1.11.2.14.11.15.2.75.5.2.1.1.15,HPN-ICF-DOT11-WIDS-MIB::hpnicfDot11RogueAPLastDetectTmStr,OCTET,read-only,,current,,Represents the time that AP was detected as a rogue AP for the last time.
.1.3.6.1.4.1.11.2.14.11.15.2.75.5.2.2,HPN-ICF-DOT11-WIDS-MIB::hpnicfDot11WIDSRogueAPExtTable,,not-accessible,,current,,As each rogue AP could be detected by multiple monitor APs, each monitor AP could have some kind of detailed information about a specific rogue AP. In the hpnicfDot11WIDSRogueAPTable table, the detailed information for a specific rogue AP will be summarized from information in the hpnicfDot11WIDSRogueAPExtTable table. For example, multiple monitor APs could receive RF signal of one rogue AP, and each monitor AP has its maximum signal strength by itself. The information will be kept as hpnicfDot11DetectMaxAPSigStrength in the hpnicfDot11WIDSRogueAPExtTable table. While only the maximum value among all the hpnicfDot11DetectMaxAPSigStrength for each monitor AP will be kept in the hpnicfDot11WIDSRogueAPTable as hpnicfDot11RogueAPMaxSigStrength.
.1.3.6.1.4.1.11.2.14.11.15.2.75.5.2.2.1,HPN-ICF-DOT11-WIDS-MIB::hpnicfDot11WIDSRogueAPExtEntry,,not-accessible,hpnicfDot11RogueAPBSSMAC:hpnicfDot11WIDSAPID,current,,Each entry contains information of the rogue AP detected by each monitor AP.
.1.3.6.1.4.1.11.2.14.11.15.2.75.5.2.2.1.1,HPN-ICF-DOT11-WIDS-MIB::hpnicfDot11WIDSAPID,OCTET,not-accessible,,current,,To uniquely identify each AP, and relation-ship between hpnicfDot11WIDSAPID and AP device will be static.
.1.3.6.1.4.1.11.2.14.11.15.2.75.5.2.2.1.2,HPN-ICF-DOT11-WIDS-MIB::hpnicfDot11DetectCurAPSigStrength,Integer32,read-only,,current,,Represents the current value of signal strength that WIDS monitor AP received from the rogue AP.
.1.3.6.1.4.1.11.2.14.11.15.2.75.5.2.2.1.3,HPN-ICF-DOT11-WIDS-MIB::hpnicfDot11DetectAPByChannel,Integer32,read-only,,current,,Represents on which radio channel that WIDS monitor AP detected the rogue AP.
.1.3.6.1.4.1.11.2.14.11.15.2.75.5.2.2.1.4,HPN-ICF-DOT11-WIDS-MIB::hpnicfDot11DetectAPByRadioID,Integer32,read-only,,current,,Represents on which radio the monitor AP has detected the rogue AP.
.1.3.6.1.4.1.11.2.14.11.15.2.75.5.2.2.1.5,HPN-ICF-DOT11-WIDS-MIB::hpnicfDot11AttackAPStatus,INTEGER,read-only,,current,true(1):false(2),Represents whether monitor AP have taken countermeasure on the rogue AP.
.1.3.6.1.4.1.11.2.14.11.15.2.75.5.2.2.1.6,HPN-ICF-DOT11-WIDS-MIB::hpnicfDot11DetectAPFirstTm,TimeTicks,read-only,,current,,Represents the time that monitor AP detected the rogue AP for the first time.
.1.3.6.1.4.1.11.2.14.11.15.2.75.5.2.2.1.7,HPN-ICF-DOT11-WIDS-MIB::hpnicfDot11DetectAPLastTm,TimeTicks,read-only,,current,,Represents the time that monitor AP detected the rogue AP for the last time.
.1.3.6.1.4.1.11.2.14.11.15.2.75.5.2.3,HPN-ICF-DOT11-WIDS-MIB::hpnicfDot11WIDSRogueStaTable,,not-accessible,,current,,The table represents the list of rogue stations detected by the WIDS.
.1.3.6.1.4.1.11.2.14.11.15.2.75.5.2.3.1,HPN-ICF-DOT11-WIDS-MIB::hpnicfDot11WIDSRogueStaEntry,,not-accessible,hpnicfDot11RogueStaMAC,current,,Each entry contains information of each rogue station.
.1.3.6.1.4.1.11.2.14.11.15.2.75.5.2.3.1.1,HPN-ICF-DOT11-WIDS-MIB::hpnicfDot11RogueStaMAC,OCTET,not-accessible,,current,,Represents the MAC address of rogue station.
.1.3.6.1.4.1.11.2.14.11.15.2.75.5.2.3.1.2,HPN-ICF-DOT11-WIDS-MIB::hpnicfDot11RogueStaVendorName,OCTET,read-only,,current,,Represents the vendor name of rogue station.
.1.3.6.1.4.1.11.2.14.11.15.2.75.5.2.3.1.3,HPN-ICF-DOT11-WIDS-MIB::hpnicfDot11RogueStaMonitorNum,Integer32,read-only,,current,,Represents the number of monitor APs which detected the rogue station.
.1.3.6.1.4.1.11.2.14.11.15.2.75.5.2.3.1.4,HPN-ICF-DOT11-WIDS-MIB::hpnicfDot11RogueStaFirstDetectTm,TimeTicks,read-only,,current,,Represents the time that station was detected as a rogue station for the first time.
.1.3.6.1.4.1.11.2.14.11.15.2.75.5.2.3.1.5,HPN-ICF-DOT11-WIDS-MIB::hpnicfDot11RogueStaLastDetectTm,TimeTicks,read-only,,current,,Represents the time that station was detected as a rogue station for the last time.
.1.3.6.1.4.1.11.2.14.11.15.2.75.5.2.3.1.6,HPN-ICF-DOT11-WIDS-MIB::hpnicfDot11RogueStaAccessBSSID,OCTET,read-only,,current,,Represents BSS MAC address that rogue station try to access.
.1.3.6.1.4.1.11.2.14.11.15.2.75.5.2.3.1.7,HPN-ICF-DOT11-WIDS-MIB::hpnicfDot11RogueStaMaxSigStrength,Integer32,read-only,,current,,Represents the maximal value of signal strength that WIDS received from the rogue station.
.1.3.6.1.4.1.11.2.14.11.15.2.75.5.2.3.1.8,HPN-ICF-DOT11-WIDS-MIB::hpnicfDot11RogueStaChannel,Integer32,read-only,,current,,Represents on which radio channel the maximal signal strength was received.
.1.3.6.1.4.1.11.2.14.11.15.2.75.5.2.3.1.9,HPN-ICF-DOT11-WIDS-MIB::hpnicfDot11RogueStaAttackedStatus,INTEGER,read-only,,current,true(1):false(2),Represents whether the countermeasure have taken for the rogue station.
.1.3.6.1.4.1.11.2.14.11.15.2.75.5.2.3.1.10,HPN-ICF-DOT11-WIDS-MIB::hpnicfDot11RogueStaToIgnore,INTEGER,read-write,,current,true(1):false(2),Represents whether the rogue AP will be taken as a rogue station. If the value is true, NMS should not display the rogue station as NMS display rogue station list, and the MAC address will be automatically added into hpnicfDot11WIDSIgnoreListTable. If the value is false, NMS will take it as a rogue station. 
.1.3.6.1.4.1.11.2.14.11.15.2.75.5.2.3.1.11,HPN-ICF-DOT11-WIDS-MIB::hpnicfDot11RogueStaAdHocStatus,INTEGER,read-only,,current,true(1):false(2),Represents whether the rogue station work on the Ad Hoc mode or not.
.1.3.6.1.4.1.11.2.14.11.15.2.75.5.2.3.1.12,HPN-ICF-DOT11-WIDS-MIB::hpnicfDot11RogueStaReset,INTEGER,read-write,,current,true(1):false(2),This object is used to clear information of assigned station. The information of AP which detects assigned rogue station will be cleared together. It will return false for get operation.
.1.3.6.1.4.1.11.2.14.11.15.2.75.5.2.3.1.13,HPN-ICF-DOT11-WIDS-MIB::hpnicfDot11RogueStaFirstDetectTmStr,OCTET,read-only,,current,,Represents the time that station was detected as a rogue station for the first time.
.1.3.6.1.4.1.11.2.14.11.15.2.75.5.2.3.1.14,HPN-ICF-DOT11-WIDS-MIB::hpnicfDot11RogueStaLastDetectTmStr,OCTET,read-only,,current,,Represents the time that station was detected as a rogue station for the last time.
.1.3.6.1.4.1.11.2.14.11.15.2.75.5.2.4,HPN-ICF-DOT11-WIDS-MIB::hpnicfDot11WIDSRogueStaExtTable,,not-accessible,,current,,As each rogue station could be detected by multiple monitor APs, each monitor AP could have some kind of detailed information about a specific rogue station. In the hpnicfDot11WIDSRogueStaTable table, the detailed information for a specific rogue station will be summarized from information in the hpnicfDot11WIDSRogueStaExtTable table. For example, multiple monitor APs could receive RF signal of one rogue station, and each monitor AP has its maximum signal strength by itself. The information will be kept as hpnicfDot11DetectMaxStaSigStrength in the hpnicfDot11WIDSRogueStaExtTable table. While only the maximum value among all the hpnicfDot11DetectMaxStaSigStrength for each monitor AP will be kept in the hpnicfDot11WIDSRogueStaTable as hpnicfDot11RogueStaMaxSigStrength.
.1.3.6.1.4.1.11.2.14.11.15.2.75.5.2.4.1,HPN-ICF-DOT11-WIDS-MIB::hpnicfDot11WIDSRogueStaExtEntry,,not-accessible,hpnicfDot11RogueStaMAC:hpnicfDot11WIDSAPID,current,,Each entry contains information of rogue station detected by each monitor AP.
.1.3.6.1.4.1.11.2.14.11.15.2.75.5.2.4.1.1,HPN-ICF-DOT11-WIDS-MIB::hpnicfDot11DetectCurStaSigStrength,Integer32,read-only,,current,,Represents the current value of signal strength that WIDS monitor AP received from the rogue station.
.1.3.6.1.4.1.11.2.14.11.15.2.75.5.2.4.1.2,HPN-ICF-DOT11-WIDS-MIB::hpnicfDot11DetectStaByChannel,Integer32,read-only,,current,,Represents on which radio channel the maximal signal strength was received.
.1.3.6.1.4.1.11.2.14.11.15.2.75.5.2.4.1.3,HPN-ICF-DOT11-WIDS-MIB::hpnicfDot11DetectStaByRadioID,Integer32,read-only,,current,,Represents which radio on the monitor AP has detected the rogue station.
.1.3.6.1.4.1.11.2.14.11.15.2.75.5.2.4.1.4,HPN-ICF-DOT11-WIDS-MIB::hpnicfDot11AttackStaStatus,INTEGER,read-only,,current,true(1):false(2),Represents whether monitor AP have taken countermeasure for the rogue station.
.1.3.6.1.4.1.11.2.14.11.15.2.75.5.2.4.1.5,HPN-ICF-DOT11-WIDS-MIB::hpnicfDot11DetectStaFirstTm,TimeTicks,read-only,,current,,Represents the time that monitor AP detected the rogue station for the first time.
.1.3.6.1.4.1.11.2.14.11.15.2.75.5.2.4.1.6,HPN-ICF-DOT11-WIDS-MIB::hpnicfDot11DetectStaLastTm,TimeTicks,read-only,,current,,Represents the time that monitor AP detected the rogue station for the last time.
.1.3.6.1.4.1.11.2.14.11.15.2.75.5.2.5,HPN-ICF-DOT11-WIDS-MIB::hpnicfDot11WIDSDetectedDevTable,,not-accessible,,current,,This Table contains information of detected devices.
.1.3.6.1.4.1.11.2.14.11.15.2.75.5.2.5.1,HPN-ICF-DOT11-WIDS-MIB::hpnicfDot11WIDSDetectedDevEntry,,not-accessible,hpnicfDot11WIDSDevMAC,current,,Each entry contains information of detected devices.
.1.3.6.1.4.1.11.2.14.11.15.2.75.5.2.5.1.1,HPN-ICF-DOT11-WIDS-MIB::hpnicfDot11WIDSDevMAC,OCTET,not-accessible,,current,,Represents MAC address of the device detected.
.1.3.6.1.4.1.11.2.14.11.15.2.75.5.2.5.1.2,HPN-ICF-DOT11-WIDS-MIB::hpnicfDot11WIDSDevType,INTEGER,read-only,,current,client(1):ap(2):adhoc(3):wirelessBridge(4):unknown(5),Represents type of the device detected.
.1.3.6.1.4.1.11.2.14.11.15.2.75.5.2.5.1.3,HPN-ICF-DOT11-WIDS-MIB::hpnicfDot11WIDSDevPermitType,INTEGER,read-only,,current,permit(1):rogue(2),Represents whether the device detected is a rogue device or not.
.1.3.6.1.4.1.11.2.14.11.15.2.75.5.2.5.1.4,HPN-ICF-DOT11-WIDS-MIB::hpnicfDot11WIDSDevVendor,OCTET,read-only,,current,,Represents Vendor of the detected device.
.1.3.6.1.4.1.11.2.14.11.15.2.75.5.2.5.1.5,HPN-ICF-DOT11-WIDS-MIB::hpnicfDot11WIDSDevMonitorNum,Integer32,read-only,,current,,Represents the number of active APs that detect the device.
.1.3.6.1.4.1.11.2.14.11.15.2.75.5.2.5.1.6,HPN-ICF-DOT11-WIDS-MIB::hpnicfDot11WIDSDevSSID,OCTET,read-only,,current,,Represents the service set identifier for the ESS of the device.
.1.3.6.1.4.1.11.2.14.11.15.2.75.5.2.5.1.7,HPN-ICF-DOT11-WIDS-MIB::hpnicfDot11WIDSDevBSSID,OCTET,read-only,,current,,Represents the basic service set identifier of the detected device.
.1.3.6.1.4.1.11.2.14.11.15.2.75.5.2.5.1.8,HPN-ICF-DOT11-WIDS-MIB::hpnicfDot11WIDSDevChannel,Integer32,read-only,,current,,Represents the channel in which the device was last detected.
.1.3.6.1.4.1.11.2.14.11.15.2.75.5.2.5.1.9,HPN-ICF-DOT11-WIDS-MIB::hpnicfDot11WIDSDevMaxRSSI,Integer32,read-only,,current,,Represents the maximum detected RSSI of the device.
.1.3.6.1.4.1.11.2.14.11.15.2.75.5.2.5.1.10,HPN-ICF-DOT11-WIDS-MIB::hpnicfDot11WIDSDevBeaconIntvl,Integer32,read-only,,current,,Represents the beacon interval for the detected AP.
.1.3.6.1.4.1.11.2.14.11.15.2.75.5.2.5.1.11,HPN-ICF-DOT11-WIDS-MIB::hpnicfDot11WIDSDevFstDctTime,OCTET,read-only,,current,,Represents the time at which the device was first detected.
.1.3.6.1.4.1.11.2.14.11.15.2.75.5.2.5.1.12,HPN-ICF-DOT11-WIDS-MIB::hpnicfDot11WIDSDevLstDctTime,OCTET,read-only,,current,,Represents the time at which the rogue AP was detected last time.
.1.3.6.1.4.1.11.2.14.11.15.2.75.5.2.5.1.13,HPN-ICF-DOT11-WIDS-MIB::hpnicfDot11WIDSDevReset,INTEGER,read-write,,current,true(1):false(2),This object is used to clears the information of the device detected in the WLAN. It will return false for get operation.
.1.3.6.1.4.1.11.2.14.11.15.2.75.5.2.5.1.14,HPN-ICF-DOT11-WIDS-MIB::hpnicfDot11WIDSDevSnr,Integer32,read-only,,current,,Represents SNR of the device detected.
.1.3.6.1.4.1.11.2.14.11.15.2.75.5.2.6,HPN-ICF-DOT11-WIDS-MIB::hpnicfDot11WIDSRptAPTable,,not-accessible,,current,,This Table contains information of the AP which detected device in the WLAN.
.1.3.6.1.4.1.11.2.14.11.15.2.75.5.2.6.1,HPN-ICF-DOT11-WIDS-MIB::hpnicfDot11WIDSRptAPEntry,,not-accessible,hpnicfDot11WIDSDevMAC:hpnicfDot11WIDSRptAPMAC,current,,Each entry contains information of the AP which detected device in the WLAN.
.1.3.6.1.4.1.11.2.14.11.15.2.75.5.2.6.1.1,HPN-ICF-DOT11-WIDS-MIB::hpnicfDot11WIDSRptAPMAC,OCTET,not-accessible,,current,,Represents the MAC address of the AP that detected the device.
.1.3.6.1.4.1.11.2.14.11.15.2.75.5.2.6.1.2,HPN-ICF-DOT11-WIDS-MIB::hpnicfDot11WIDSRptAPName,OCTET,read-only,,current,,Represents the name of the AP that detected the device.
.1.3.6.1.4.1.11.2.14.11.15.2.75.5.2.6.1.3,HPN-ICF-DOT11-WIDS-MIB::hpnicfDot11WIDSRptAPRadioID,Integer32,read-only,,current,,Represents the radio index of the AP that detected the device.
.1.3.6.1.4.1.11.2.14.11.15.2.75.5.2.6.1.4,HPN-ICF-DOT11-WIDS-MIB::hpnicfDot11WIDSRptAPMaxRSSI,Integer32,read-only,,current,,Represents the maximum detected RSSI of the device.
.1.3.6.1.4.1.11.2.14.11.15.2.75.5.2.6.1.5,HPN-ICF-DOT11-WIDS-MIB::hpnicfDot11WIDSRptAPFstDctTime,OCTET,read-only,,current,,Represents the time at which the rogue AP was detected first time.
.1.3.6.1.4.1.11.2.14.11.15.2.75.5.2.6.1.6,HPN-ICF-DOT11-WIDS-MIB::hpnicfDot11WIDSRptAPLstDctTime,OCTET,read-only,,current,,Represents the time at which the rogue AP was detected last time.
.1.3.6.1.4.1.11.2.14.11.15.2.75.5.2.7,HPN-ICF-DOT11-WIDS-MIB::hpnicfDot11DynBlackListTable,,not-accessible,,current,,This table contains information of dynamic blacklist entries.
.1.3.6.1.4.1.11.2.14.11.15.2.75.5.2.7.1,HPN-ICF-DOT11-WIDS-MIB::hpnicfDot11DynBlackListEntry,,not-accessible,hpnicfDot11DynBlackListMAC,current,,Each entry contains information of dynamic blacklist.
.1.3.6.1.4.1.11.2.14.11.15.2.75.5.2.7.1.1,HPN-ICF-DOT11-WIDS-MIB::hpnicfDot11DynBlackListMAC,OCTET,not-accessible,,current,,Represents the MAC address of the device inserted into the dynamic blacklist.
.1.3.6.1.4.1.11.2.14.11.15.2.75.5.2.7.1.2,HPN-ICF-DOT11-WIDS-MIB::hpnicfDot11DynBlackListTime,Unsigned32,read-only,,current,,Represents the time elapsed since the entry was last updated.
.1.3.6.1.4.1.11.2.14.11.15.2.75.5.2.7.1.3,HPN-ICF-DOT11-WIDS-MIB::hpnicfDot11DynBlackListReason,OCTET,read-only,,current,,Represents the reason why the entry was added into the dynamic blacklist.
.1.3.6.1.4.1.11.2.14.11.15.2.75.5.2.7.1.4,HPN-ICF-DOT11-WIDS-MIB::hpnicfDot11DynBlackListReset,INTEGER,read-write,,current,true(1):false(2),This object is used to remove designated entry from the dynamic blacklist. The value which read from this object always is false.
.1.3.6.1.4.1.11.2.14.11.15.2.75.5.2.7.1.5,HPN-ICF-DOT11-WIDS-MIB::hpnicfDot11DynBlackListTimeTicks,TimeTicks,read-only,,current,,Represents the time elapsed since the entry was last updated in units TimeTicks.
.1.3.6.1.4.1.11.2.14.11.15.2.75.5.2.8,HPN-ICF-DOT11-WIDS-MIB::hpnicfDot11WIDSRogueHistoryTable,,not-accessible,,current,,This table contains information of all expired rogue devices which have been deleted from the list of detected rogue devices because they could not be detected within the device aging duration.
.1.3.6.1.4.1.11.2.14.11.15.2.75.5.2.8.1,HPN-ICF-DOT11-WIDS-MIB::hpnicfDot11WIDSRogueHistoryEntry,,not-accessible,hpnicfDot11WIDSRogueHisIndex,current,,Each entry contains information of an expired rogue device which has been deleted from the list of detected rogue devices because they could not be detected within the device aging duration.
.1.3.6.1.4.1.11.2.14.11.15.2.75.5.2.8.1.1,HPN-ICF-DOT11-WIDS-MIB::hpnicfDot11WIDSRogueHisIndex,Integer32,not-accessible,,current,,Represents index of this entry.
.1.3.6.1.4.1.11.2.14.11.15.2.75.5.2.8.1.2,HPN-ICF-DOT11-WIDS-MIB::hpnicfDot11WIDSRogueHisMAC,OCTET,read-only,,current,,Represents the MAC address of the device.
.1.3.6.1.4.1.11.2.14.11.15.2.75.5.2.8.1.3,HPN-ICF-DOT11-WIDS-MIB::hpnicfDot11WIDSRogueHisVendor,OCTET,read-only,,current,,Represents the vendor for the device.
.1.3.6.1.4.1.11.2.14.11.15.2.75.5.2.8.1.4,HPN-ICF-DOT11-WIDS-MIB::hpnicfDot11WIDSRogueHisType,INTEGER,read-only,,current,client(1):ap(2):adhoc(3):wirelessBridge(4):unknown(5),Represents the type of the device.
.1.3.6.1.4.1.11.2.14.11.15.2.75.5.2.8.1.5,HPN-ICF-DOT11-WIDS-MIB::hpnicfDot11WIDSRogueHisChl,Integer32,read-only,,current,,Represents the channel in which the device was last detected.
.1.3.6.1.4.1.11.2.14.11.15.2.75.5.2.8.1.6,HPN-ICF-DOT11-WIDS-MIB::hpnicfDot11WIDSRogueHisSSID,OCTET,read-only,,current,,Represents the service set identifier for the ESS of the device.
.1.3.6.1.4.1.11.2.14.11.15.2.75.5.2.8.1.7,HPN-ICF-DOT11-WIDS-MIB::hpnicfDot11WIDSRogueHisLastDctTime,OCTET,read-only,,current,,Represents the time at which the device was last detected.
.1.3.6.1.4.1.11.2.14.11.15.2.75.5.2.9,HPN-ICF-DOT11-WIDS-MIB::hpnicfDot11WIDSAtkHistroyTable,,not-accessible,,current,,This table contains information of the history of attacks detected in the WLAN system.
.1.3.6.1.4.1.11.2.14.11.15.2.75.5.2.9.1,HPN-ICF-DOT11-WIDS-MIB::hpnicfDot11WIDSAtkHistroyEntry,,not-accessible,hpnicfDot11WIDSAtkHisIndex,current,,Each entry contains information of the history of attacks detected in the WLAN system.
.1.3.6.1.4.1.11.2.14.11.15.2.75.5.2.9.1.1,HPN-ICF-DOT11-WIDS-MIB::hpnicfDot11WIDSAtkHisIndex,Integer32,not-accessible,,current,,Represents index of this entry.
.1.3.6.1.4.1.11.2.14.11.15.2.75.5.2.9.1.2,HPN-ICF-DOT11-WIDS-MIB::hpnicfDot11WIDSAtkHisMAC,OCTET,read-only,,current,,Represents the Mac address. In case of spoof attacks, this field provides the BSSID which was spoofed. In case of other attacks, this field provides the MAC address of the device which initiated the attack.
.1.3.6.1.4.1.11.2.14.11.15.2.75.5.2.9.1.3,HPN-ICF-DOT11-WIDS-MIB::hpnicfDot11WIDSAtkHisType,INTEGER,read-only,,current,act(1):asr(2):aur(3):daf(4):dar(5):ndf(6):pbr(7):rar(8):saf(9):sdf(10):wiv(11):unknown(12),Represents the type of attack.
.1.3.6.1.4.1.11.2.14.11.15.2.75.5.2.9.1.4,HPN-ICF-DOT11-WIDS-MIB::hpnicfDot11WIDSAtkHisChl,Integer32,read-only,,current,,Represents the channel in which the attack was detected.
.1.3.6.1.4.1.11.2.14.11.15.2.75.5.2.9.1.5,HPN-ICF-DOT11-WIDS-MIB::hpnicfDot11WIDSAtkHisRSSI,Integer32,read-only,,current,,Represents the average RSSI of the designated attack.
.1.3.6.1.4.1.11.2.14.11.15.2.75.5.2.9.1.6,HPN-ICF-DOT11-WIDS-MIB::hpnicfDot11WIDSAtkHisDctTime,OCTET,read-only,,current,,Represents the time at which this attack was detected.
.1.3.6.1.4.1.11.2.14.11.15.2.75.5.2.9.1.7,HPN-ICF-DOT11-WIDS-MIB::hpnicfDot11WIDSAtkHisAPName,OCTET,read-only,,current,,Represents the name of the AP which detected this attack.
.1.3.6.1.4.1.11.2.14.11.15.2.75.5.2.10,HPN-ICF-DOT11-WIDS-MIB::hpnicfDot11WIDSAtkStatis,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.2.75.5.2.10.1,HPN-ICF-DOT11-WIDS-MIB::hpnicfDot11WIDSAtkStasStartTime,OCTET,read-only,,current,,Represents current attack tracking time. It is started at the system startup and is refreshed each hour subsequently.
.1.3.6.1.4.1.11.2.14.11.15.2.75.5.2.10.2,HPN-ICF-DOT11-WIDS-MIB::hpnicfDot11WIDSAtkStasTable,,not-accessible,,current,,This table contains information of the counts of attacks detected.
.1.3.6.1.4.1.11.2.14.11.15.2.75.5.2.10.2.1,HPN-ICF-DOT11-WIDS-MIB::hpnicfDot11WIDSAtkStasEntry,,not-accessible,hpnicfDot11WIDSAtkStasType,current,,Each entry contains information of the counts of attacks detected.
.1.3.6.1.4.1.11.2.14.11.15.2.75.5.2.10.2.1.1,HPN-ICF-DOT11-WIDS-MIB::hpnicfDot11WIDSAtkStasType,INTEGER,not-accessible,,current,act(1):asr(2):aur(3):daf(4):dar(5):ndf(6):pbr(7):rar(8):saf(9):sdf(10):wiv(11):unknown(12),Represents the type of attack.
.1.3.6.1.4.1.11.2.14.11.15.2.75.5.2.10.2.1.2,HPN-ICF-DOT11-WIDS-MIB::hpnicfDot11WIDSAtkStasCurCnt,Unsigned32,read-only,,current,,Represents the count of attacks detected since the time specified by the current attack tracking time. The current attack tracking time is started at the system startup and is refreshed each hour subsequently.
.1.3.6.1.4.1.11.2.14.11.15.2.75.5.2.10.2.1.3,HPN-ICF-DOT11-WIDS-MIB::hpnicfDot11WIDSAtkStasTotalCnt,Unsigned32,read-only,,current,,Represents the total count of the attacks detected since the system startup.
.1.3.6.1.4.1.11.2.14.11.15.2.75.5.2.11,HPN-ICF-DOT11-WIDS-MIB::hpnicfDot11BlackListTable,,not-accessible,,current,,This table contains information of blacklist entries, including dynamic and static.
.1.3.6.1.4.1.11.2.14.11.15.2.75.5.2.11.1,HPN-ICF-DOT11-WIDS-MIB::hpnicfDot11BlackListEntry,,not-accessible,hpnicfDot11BlackListMAC,current,,Each entry contains information of blacklist.
.1.3.6.1.4.1.11.2.14.11.15.2.75.5.2.11.1.1,HPN-ICF-DOT11-WIDS-MIB::hpnicfDot11BlackListMAC,OCTET,not-accessible,,current,,This object represents the MAC address of the device inserted into the table.
.1.3.6.1.4.1.11.2.14.11.15.2.75.5.2.11.1.2,HPN-ICF-DOT11-WIDS-MIB::hpnicfDot11BlackListTime,Unsigned32,read-only,,current,,Represents the time elapsed since the entry was last updated. If it is static blacklist, the value is always 0.
.1.3.6.1.4.1.11.2.14.11.15.2.75.5.2.11.1.3,HPN-ICF-DOT11-WIDS-MIB::hpnicfDot11BlackListReason,OCTET,read-only,,current,,Represents the reason why the entry was added into the blacklist.
.1.3.6.1.4.1.11.2.14.11.15.2.75.5.2.11.1.4,HPN-ICF-DOT11-WIDS-MIB::hpnicfDot11BlackListRowStatus,INTEGER,read-create,,current,active(1):notInService(2):notReady(3):createAndGo(4):createAndWait(5):destroy(6),This object represents the status of this table entry.
.1.3.6.1.4.1.11.2.14.11.15.2.75.5.2.11.1.5,HPN-ICF-DOT11-WIDS-MIB::hpnicfDot11BlackListTimeTicks,TimeTicks,read-only,,current,,Represents the time elapsed since the entry was last updated in timetick. If it is static blacklist, the value is always 0.
.1.3.6.1.4.1.11.2.14.11.15.2.75.5.3,HPN-ICF-DOT11-WIDS-MIB::hpnicfDot11WIDSNotifyGroup,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.2.75.5.3.1,HPN-ICF-DOT11-WIDS-MIB::hpnicfDot11WIDSTraps,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.2.75.5.3.1.1,HPN-ICF-DOT11-WIDS-MIB::hpnicfDot11WIDSDetectRogueTrap,,,,,,The notification represents that a rogue AP or a station was detected by WIDS. The NMS would refer to MIB table under hpnicfDot11WIDSDetectGroup group to get more detailed information.
.1.3.6.1.4.1.11.2.14.11.15.2.75.5.3.1.2,HPN-ICF-DOT11-WIDS-MIB::hpnicfDot11WIDSAdHocTrap,,,,,,The notification represents a rogue Ad hoc station was detected.
.1.3.6.1.4.1.11.2.14.11.15.2.75.5.3.1.3,HPN-ICF-DOT11-WIDS-MIB::hpnicfDot11WIDSUnauthorSSIDTrap,,,,,,The notification represents which unauthorized SSID are accessed in the network. The notification will be sent to NMS when an unauthorized SSID is detected on the network for the first time.
.1.3.6.1.4.1.11.2.14.11.15.2.75.5.3.1.4,HPN-ICF-DOT11-WIDS-MIB::hpnicfDot11WIDSDisappearRogueTrap,,,,,,The notification represents that a rogue device has aged out and moved to history table or the device type has been changed to friendly. The notification will be sent to NMS whenever a rogue disappears.
.1.3.6.1.4.1.11.2.14.11.15.2.75.5.3.1.5,HPN-ICF-DOT11-WIDS-MIB::hpnicfDot11WIDSDetectAttack,,,,,,This notification occurs when some type of attack is detected. 
.1.3.6.1.4.1.11.2.14.11.15.2.75.5.3.1.6,HPN-ICF-DOT11-WIDS-MIB::hpnicfDot11WIDSDetectWBridge,,,,,,This notification occurs whenever a detected device is classified as rogue wireless-bridge. 
.1.3.6.1.4.1.11.2.14.11.15.2.75.5.3.1.7,HPN-ICF-DOT11-WIDS-MIB::hpnicfDot11WIDSFloodTrap,,,,,,This notification occurs when flood attack is detected. 
.1.3.6.1.4.1.11.2.14.11.15.2.75.5.3.1.8,HPN-ICF-DOT11-WIDS-MIB::hpnicfDot11WIDSSpoofTrap,,,,,,This notification occurs when spoof attack is detected. 
.1.3.6.1.4.1.11.2.14.11.15.2.75.5.3.1.9,HPN-ICF-DOT11-WIDS-MIB::hpnicfDot11WIDSWeakIVTrap,,,,,,This notification occurs when weak IV attack is detected. 
.1.3.6.1.4.1.11.2.14.11.15.2.75.5.3.2,HPN-ICF-DOT11-WIDS-MIB::hpnicfDot11WIDSTrapVarObjects,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.2.75.5.3.2.1,HPN-ICF-DOT11-WIDS-MIB::hpnicfDot11WIDSRogueMAC,OCTET,accessible-for-notify,,current,,Represents which rogue AP or station.
.1.3.6.1.4.1.11.2.14.11.15.2.75.5.3.2.2,HPN-ICF-DOT11-WIDS-MIB::hpnicfDot11WIDSRogueType,INTEGER,accessible-for-notify,,current,rogueAp(1):rogueStation(2),Represents the rogue type. The following value are supported rogueAp(1) - A rogue AP rogueStation(2) - A rogue Station
.1.3.6.1.4.1.11.2.14.11.15.2.75.5.3.2.3,HPN-ICF-DOT11-WIDS-MIB::hpnicfDot11WIDSMonitorMAC,OCTET,accessible-for-notify,,current,,Represents which monitor detected the rogue AP or station.
.1.3.6.1.4.1.11.2.14.11.15.2.75.5.3.2.4,HPN-ICF-DOT11-WIDS-MIB::hpnicfDot11WIDSAdHocMAC,OCTET,accessible-for-notify,,current,,Represents the MAC address of Ad hoc station.
.1.3.6.1.4.1.11.2.14.11.15.2.75.5.3.2.5,HPN-ICF-DOT11-WIDS-MIB::hpnicfDot11UnauthorSSIDName,OCTET,accessible-for-notify,,current,,Represents an unauthorized SSID.
.1.3.6.1.4.1.11.2.14.11.15.2.75.5.3.2.6,HPN-ICF-DOT11-WIDS-MIB::hpnicfDot11MonitorAPID,OCTET,accessible-for-notify,,current,,Represents monitor AP's APID.
.1.3.6.1.4.1.11.2.14.11.15.2.75.5.3.2.7,HPN-ICF-DOT11-WIDS-MIB::hpnicfDot11MonitorApRadioID,Integer32,accessible-for-notify,,current,,Represents monitor AP's radio ID
.1.3.6.1.4.1.11.2.14.11.15.2.75.5.3.2.8,HPN-ICF-DOT11-WIDS-MIB::hpnicfDot11WIDSAtkMac,OCTET,accessible-for-notify,,current,,Represents mac address of attack source.
.1.3.6.1.4.1.11.2.14.11.15.2.75.5.3.2.9,HPN-ICF-DOT11-WIDS-MIB::hpnicfDot11WIDSAtkFrameType,OCTET,accessible-for-notify,,current,,Represents attack frame type.
.1.3.6.1.4.1.11.2.14.11.15.2.75.5.3.2.10,HPN-ICF-DOT11-WIDS-MIB::hpnicfDot11WIDSAtkChannel,Integer32,accessible-for-notify,,current,,Represents attack channel.
.1.3.6.1.4.1.11.2.14.11.15.2.75.5.3.2.11,HPN-ICF-DOT11-WIDS-MIB::hpnicfDot11WIDSAtkTime,OCTET,accessible-for-notify,,current,,Represents when attacking happened.
.1.3.6.1.4.1.11.2.14.11.15.2.75.5.3.2.12,HPN-ICF-DOT11-WIDS-MIB::hpnicfDot11WIDSAtkDestMac,OCTET,accessible-for-notify,,current,,Represents mac address of attack destination.
.1.3.6.1.4.1.11.2.14.11.15.2.75.5.3.2.13,HPN-ICF-DOT11-WIDS-MIB::hpnicfDot11WIDSFirstTrapTime,TimeTicks,accessible-for-notify,,current,,Represents the first trap time.
.1.3.6.1.4.1.11.2.14.11.15.2.75.6,HPN-ICF-DOT11-CFGEXT-MIB::hpnicfDot11CFGEXT,,,,,,This MIB provides information for WLAN configuration extended. The HPN-ICF-DOT11-CFG-MIB define MIB objects for WLAN basic configuration, while this MIB will define MIB objects for load balance these kinds feature. GLOSSARY IEEE 802.11 Standard to encourage interoperability among wireless networking equipment. Access point (AP) Transmitter/receiver (transceiver) device that commonly connects and transports data between a wireless network and a wired network. Access control (AC) To control and manage multi-APs, it will bridge wireless and wired network. Fat AP Applied in the home, SOHO and so on, and it could work independently without help from AC. Fit AP Applied in the enterprise environment, it will work under the control and management from AC. Control And Provisioning of Wireless Access Points Protocol The short name of protocol is CAPWAP. AC will control and manage AP by CAPWAP tunnel protocol defined by IETF. Also, a data tunnel will be set up between AC and AP. BSS IEEE 802.11 Basic Service Set (Radio Cell). The BSS of an AP comprises of the stations directly associating with the AP. Radio The chip set to receive and send wireless signal. Association The service used to establish access point or station mapping and enable station invocation of the distribution system services. (Wireless clients attempt to connect to access points.) Basic Rate A data rate that is mandatory for client devices to support in order for them to achieve successful association. MSDU MAC Service Data Unit, it is frame format defined by 802.11. TU It is 1,024 microseconds (ms), which is about 1 millisecond. AKM The authentication and key management method defined by 802.11i, and which includes 802.1x and pre-shared key.
.1.3.6.1.4.1.11.2.14.11.15.2.75.6.1,HPN-ICF-DOT11-CFGEXT-MIB::hpnicfDot11LoadBalance,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.2.75.6.1.1,HPN-ICF-DOT11-CFGEXT-MIB::hpnicfDot11LBGlobalGroup,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.2.75.6.1.1.1,HPN-ICF-DOT11-CFGEXT-MIB::hpnicfDot11LoadBalanceTrafficEnable,INTEGER,read-write,,current,true(1):false(2),Represents whether enable load balancing according to station traffic.
.1.3.6.1.4.1.11.2.14.11.15.2.75.6.1.1.2,HPN-ICF-DOT11-CFGEXT-MIB::hpnicfDot11LoadBalanceTrafficThres,Integer32,read-write,,current,,Represents the threshold value for Traffic based load balancing.
.1.3.6.1.4.1.11.2.14.11.15.2.75.6.1.1.3,HPN-ICF-DOT11-CFGEXT-MIB::hpnicfDot11LoadBalanceSessionEnable,INTEGER,read-write,,current,true(1):false(2),Represents whether enable load balancing according to station session number.
.1.3.6.1.4.1.11.2.14.11.15.2.75.6.1.1.4,HPN-ICF-DOT11-CFGEXT-MIB::hpnicfDot11LoadBalanceSessionThres,Integer32,read-write,,current,,Represents the threshold value for session number based load balancing.
.1.3.6.1.4.1.11.2.14.11.15.2.75.6.1.1.5,HPN-ICF-DOT11-CFGEXT-MIB::hpnicfDot11LoadBalanceTrafficGap,Integer32,read-write,,current,,Traffic gap threshold. Load balancing is carried out for a radio when the traffic threshold and session gap are exceeded.
.1.3.6.1.4.1.11.2.14.11.15.2.75.6.1.1.6,HPN-ICF-DOT11-CFGEXT-MIB::hpnicfDot11LoadBalanceSessionGap,Integer32,read-write,,current,,Session gap threshold. Load balancing is carried out for a radio when the session threshold and session gap are exceeded.
.1.3.6.1.4.1.11.2.14.11.15.2.75.6.1.1.7,HPN-ICF-DOT11-CFGEXT-MIB::hpnicfDot11LBTrafficThresKbps,Integer32,read-write,,current,,Represents the threshold value for Traffic based load balancing.
.1.3.6.1.4.1.11.2.14.11.15.2.75.6.1.1.8,HPN-ICF-DOT11-CFGEXT-MIB::hpnicfDot11LBTrafficGapKbps,Integer32,read-write,,current,,Traffic gap threshold. Load balancing is carried out for a radio when the traffic threshold gap are exceeded.
.1.3.6.1.4.1.11.2.14.11.15.2.75.6.1.2,HPN-ICF-DOT11-CFGEXT-MIB::hpnicfDot11LBRadioGroupTable,,not-accessible,,current,,This table defines load balance radio group.
.1.3.6.1.4.1.11.2.14.11.15.2.75.6.1.2.1,HPN-ICF-DOT11-CFGEXT-MIB::hpnicfDot11LBRadioGroupEntry,,not-accessible,hpnicfDot11LBRadioGroupId,current,,Each entry contains information of one load balance radio group.
.1.3.6.1.4.1.11.2.14.11.15.2.75.6.1.2.1.1,HPN-ICF-DOT11-CFGEXT-MIB::hpnicfDot11LBRadioGroupId,Unsigned32,not-accessible,,current,,Represents load balance radio group ID.
.1.3.6.1.4.1.11.2.14.11.15.2.75.6.1.2.1.2,HPN-ICF-DOT11-CFGEXT-MIB::hpnicfDot11LBRadioGroupDesc,OCTET,read-create,,current,,Represents the description of load balance radio group.
.1.3.6.1.4.1.11.2.14.11.15.2.75.6.1.2.1.3,HPN-ICF-DOT11-CFGEXT-MIB::hpnicfDot11LBRadioGroupRowStatus,INTEGER,read-create,,current,active(1):notInService(2):notReady(3):createAndGo(4):createAndWait(5):destroy(6),The row status of this table entry.
.1.3.6.1.4.1.11.2.14.11.15.2.75.7,HPN-ICF-DOT11-WLANEXT-MIB::hpnicfDot11WLANEXT,,,,,,This MIB provides more information for WLAN network. GLOSSARY IEEE 802.11 Standard to encourage interoperability among wireless networking equipment. IEEE 802.11e Standard to define the MAC procedures to support LAN applications with Quality of Service (QoS) requirements, including the transport of voice, audio and video over IEEE 802.11 wireless LANs. Access point (AP) Transmitter/receiver (transceiver) device that commonly connects and transports data between a wireless network and a wired network. Access control (AC) To control and manage multi-APs, it will bridge wireless and wired network. Radio The chip set to receive and send wireless signal. Fat AP Applied in the home, SOHO and so on, and it could independently work without help from AC. Fit AP Applied in the enterprise environment, it will work under the control and management from AC. Control And Provisioning of Wireless Access Points Protocol The short name of protocol is CAPWAP. AC will control and manage AP by CAPWAP tunnel protocol defined by IETF. Also, a data tunnel will be set up between AC and AP. Basic Service Set The IEEE 802.11 BSS of an AP comprises of the stations directly associating with the AP. It will be identified by BSSID.
.1.3.6.1.4.1.11.2.14.11.15.2.75.7.1,HPN-ICF-DOT11-WLANEXT-MIB::hpnicfDot11RFGroup,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.2.75.7.1.1,HPN-ICF-DOT11-WLANEXT-MIB::hpnicfDot11RFSignalStatisTable,,not-accessible,,current,,The table will describe statistic information of signal strength for AP radio.
.1.3.6.1.4.1.11.2.14.11.15.2.75.7.1.1.1,HPN-ICF-DOT11-WLANEXT-MIB::hpnicfDot11RFSignalStatisEntry,,not-accessible,hpnicfDot11RFAPID:hpnicfDot11RFRadioID,current,,Each entry contains the signal of each signal strength information of a specific AP.
.1.3.6.1.4.1.11.2.14.11.15.2.75.7.1.1.1.1,HPN-ICF-DOT11-WLANEXT-MIB::hpnicfDot11RFAPID,OCTET,not-accessible,,current,,To identify each AP, and AP is running status.
.1.3.6.1.4.1.11.2.14.11.15.2.75.7.1.1.1.2,HPN-ICF-DOT11-WLANEXT-MIB::hpnicfDot11RFRadioID,Integer32,not-accessible,,current,,Represents each radio.
.1.3.6.1.4.1.11.2.14.11.15.2.75.7.1.1.1.3,HPN-ICF-DOT11-WLANEXT-MIB::hpnicfDot11RFSignalStatisInterv,Integer32,read-only,,current,,Represents the interval of statistic.
.1.3.6.1.4.1.11.2.14.11.15.2.75.7.1.1.1.4,HPN-ICF-DOT11-WLANEXT-MIB::hpnicfDot11RFAverageSignalStrength,Integer32,read-only,,current,,Represents the average value of signal strength for stations on a specific radio.
.1.3.6.1.4.1.11.2.14.11.15.2.75.7.1.1.1.5,HPN-ICF-DOT11-WLANEXT-MIB::hpnicfDot11RFMaxSignalStrength,Integer32,read-only,,current,,Represents the maximum value of signal strength for stations on a specific radio.
.1.3.6.1.4.1.11.2.14.11.15.2.75.7.1.1.1.6,HPN-ICF-DOT11-WLANEXT-MIB::hpnicfDot11RFMinSignalStrength,Integer32,read-only,,current,,Represents the minimum value of signal strength for stations on a specific radio.
.1.3.6.1.4.1.11.2.14.11.15.2.75.7.2,HPN-ICF-DOT11-WLANEXT-MIB::hpnicfDot11QosGroup,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.2.75.7.2.1,HPN-ICF-DOT11-WLANEXT-MIB::hpnicfDot11QosStatisTable,,not-accessible,,current,,The table defines the attributes for the Qos feature of radio.
.1.3.6.1.4.1.11.2.14.11.15.2.75.7.2.1.1,HPN-ICF-DOT11-WLANEXT-MIB::hpnicfDot11QosStatisEntry,,not-accessible,hpnicfDot11QosAPID:hpnicfDot11QosRadioID,current,,Each entry contains information of the Qos attribute of each radio.
.1.3.6.1.4.1.11.2.14.11.15.2.75.7.2.1.1.1,HPN-ICF-DOT11-WLANEXT-MIB::hpnicfDot11QosAPID,OCTET,not-accessible,,current,,To uniquely identify a AP in running status.
.1.3.6.1.4.1.11.2.14.11.15.2.75.7.2.1.1.2,HPN-ICF-DOT11-WLANEXT-MIB::hpnicfDot11QosRadioID,Integer32,not-accessible,,current,,Represents each radio.
.1.3.6.1.4.1.11.2.14.11.15.2.75.7.2.1.1.3,HPN-ICF-DOT11-WLANEXT-MIB::hpnicfDot11QosAverageQueLen,Integer32,read-only,,current,,The average frame numbers to be sent out in the queue.
.1.3.6.1.4.1.11.2.14.11.15.2.75.7.2.1.1.4,HPN-ICF-DOT11-WLANEXT-MIB::hpnicfDot11QosDropFrameRatio,Integer32,read-only,,current,,The ratio of dropped frames in a minute because of full queue.
.1.3.6.1.4.1.11.2.14.11.15.2.75.7.2.1.1.5,HPN-ICF-DOT11-WLANEXT-MIB::hpnicfDot11QosAverageDataRate,Integer32,read-only,,current,,The average transmit data rate of radio.
.1.3.6.1.4.1.11.2.14.11.15.2.75.7.2.2,HPN-ICF-DOT11-WLANEXT-MIB::hpnicfDot11QosAcStatisTable,,not-accessible,,current,,The table defines the parameters for Qos access category.
.1.3.6.1.4.1.11.2.14.11.15.2.75.7.2.2.1,HPN-ICF-DOT11-WLANEXT-MIB::hpnicfDot11QosAcStatisEntry,,not-accessible,hpnicfDot11QosAPID:hpnicfDot11QosRadioID:hpnicfDot11QosAcType,current,,Each entry contains information of each Qos access category.
.1.3.6.1.4.1.11.2.14.11.15.2.75.7.2.2.1.1,HPN-ICF-DOT11-WLANEXT-MIB::hpnicfDot11QosAcType,INTEGER,not-accessible,,current,acbk(1):acbe(2):acvi(3):acvo(4),The access category type.
.1.3.6.1.4.1.11.2.14.11.15.2.75.7.2.2.1.2,HPN-ICF-DOT11-WLANEXT-MIB::hpnicfDot11AcDropFrameCnt,Counter32,read-only,,current,,The number of dropped frames in a minute for one specific access category because of full queue.
.1.3.6.1.4.1.11.2.14.11.15.2.75.8,HPN-ICF-DOT11-RRM-MIB::hpnicfDot11RRM,,,,,,This MIB file is to provide the object definition of WLAN radio resource management (RRM).
.1.3.6.1.4.1.11.2.14.11.15.2.75.8.1,HPN-ICF-DOT11-RRM-MIB::hpnicfDot11RRMConfigGroup,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.2.75.8.1.1,HPN-ICF-DOT11-RRM-MIB::hpnicfDot11RRMGlobalCfgPara,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.2.75.8.1.1.1,HPN-ICF-DOT11-RRM-MIB::hpnicfDot11RRM11nMadtMaxMcs,Integer32,read-write,,current,,Specify the maximum modulation and coding scheme (MCS) index for 802.11n mandatory rates. The value 255 indicates that no maximum MCS index is specified. No maximum MCS index is specified for 802.11n mandatory rates by default. Besides 255, the specified maximum MCS index for 802.11n supported rates must be no less than the specified maximum MCS index for 802.11n mandatory rates.
.1.3.6.1.4.1.11.2.14.11.15.2.75.8.1.1.2,HPN-ICF-DOT11-RRM-MIB::hpnicfDot11RRM11nSuptMaxMcs,Integer32,read-write,,current,,Specify the maximum Modulation and Coding Scheme (MCS) index for 802.11n supported rates. The specified maximum MCS index for 802.11n supported rates must be no less than the specified maximum MCS index for 802.11n mandatory rates.
.1.3.6.1.4.1.11.2.14.11.15.2.75.8.1.1.3,HPN-ICF-DOT11-RRM-MIB::hpnicfDot11RRM11gProtect,INTEGER,read-write,,current,true(1):false(2),Enable/Disable dot11g protection.
.1.3.6.1.4.1.11.2.14.11.15.2.75.8.1.1.4,HPN-ICF-DOT11-RRM-MIB::hpnicfDot11RRM11aPwrConstrt,Integer32,read-write,,current,,Configure the power constraint for all 802.11a radios. The configured power constraint is advertised in beacons if spectrum management is enabled. The range of power constraint is 0 to MAX-POWER-1 (where the MAX-POWER is defined by the regulatory domain).
.1.3.6.1.4.1.11.2.14.11.15.2.75.8.1.1.5,HPN-ICF-DOT11-RRM-MIB::hpnicfDot11RRM11aSpectrumManag,INTEGER,read-write,,current,true(1):false(2),Enable/Disable spectrum management for 802.11a radios. When spectrum management is enabled, the WLAN sub-system advertises power capabilities of the AP and power constraints applicable to all devices in the BSS based on regulatory domain specification.
.1.3.6.1.4.1.11.2.14.11.15.2.75.8.1.1.6,HPN-ICF-DOT11-RRM-MIB::hpnicfDot11RRMAutoChlAvoid11h,INTEGER,read-write,,current,true(1):false(2),Configure the auto-channel set as non-dot11h channels, this is, only the non-dot11h channels belonging to the country code are scanned during initial channel selection and one of them is selected.
.1.3.6.1.4.1.11.2.14.11.15.2.75.8.1.1.7,HPN-ICF-DOT11-RRM-MIB::hpnicfDot11RRMScanChl,INTEGER,read-write,,current,auto(1):all(2),Set the scan mode. auto: When this option is set, all channels of the country code being set are scanned. all: When this option is set, all the channels of the radio band are scanned.
.1.3.6.1.4.1.11.2.14.11.15.2.75.8.1.1.8,HPN-ICF-DOT11-RRM-MIB::hpnicfDot11RRMScanRptIntvel,Integer32,read-write,,current,,Set the scan report interval.
.1.3.6.1.4.1.11.2.14.11.15.2.75.8.1.1.9,HPN-ICF-DOT11-RRM-MIB::hpnicfDot11APInterfNumThreshhd,Integer32,read-write,,current,,Represents threshold of AP interference . If the value of AP interference exceeds this threshold, AP interference trap will be sent. If the value of this node is zero, AP interference trap will be sent immediately.
.1.3.6.1.4.1.11.2.14.11.15.2.75.8.1.1.10,HPN-ICF-DOT11-RRM-MIB::hpnicfDot11StaInterfNumThreshhd,Integer32,read-write,,current,,Represents threshold of STA interference. If the value of STA interference exceeds this threshold, STA interference trap will be sent. If the value of this node is zero, STA interference trap will be sent immediately. 
.1.3.6.1.4.1.11.2.14.11.15.2.75.8.1.1.11,HPN-ICF-DOT11-RRM-MIB::hpnicfDot11RRM11nMultiCastMcs,Unsigned32,read-write,,current,,Specify the modulation and coding scheme (MCS) index for 802.11n multicast rates. The value 4294967295 indicates that no MCS index is specified. No MCS index is specified for 802.11n multicast rates by default. Besides 4294967295, the specified MCS index for 802.11n multicast rates must be no less than the specified maximum MCS index for 802.11n mandatory rates. Before configure the MCS index for 802.11n multicast rates, the maximum MCS index for 802.11n mandatory rates must be configured
.1.3.6.1.4.1.11.2.14.11.15.2.75.8.1.1.12,HPN-ICF-DOT11-RRM-MIB::hpnicfDot11RRM11acMadtMaxNss,Integer32,read-write,,current,,Specify the maximum NSS index for 802.11ac mandatory rates. The value 0 indicates that no maximum NSS index is specified. No maximum NSS index is specified for 802.11ac mandatory rates by default. The specified maximum NSS index for 802.11ac supported rates must be no less than the specified maximum NSS index for 802.11ac mandatory rates.
.1.3.6.1.4.1.11.2.14.11.15.2.75.8.1.1.13,HPN-ICF-DOT11-RRM-MIB::hpnicfDot11RRM11acSuptMaxNss,Integer32,read-write,,current,,Specify the maximum NSS index for 802.11ac supported rates. The specified maximum NSS index for 802.11ac supported rates must be no less than the specified maximum NSS index for 802.11ac mandatory rates.
.1.3.6.1.4.1.11.2.14.11.15.2.75.8.1.1.14,HPN-ICF-DOT11-RRM-MIB::hpnicfDot11RRM11acMultiCastNss,Integer32,read-write,,current,,Specify the NSS index for 802.11ac multicast rates. The value 0 indicates that no NSS index is specified. No NSS index is specified for 802.11ac multicast rates by default. The specified NSS index for 802.11ac multicast rates must be no less than the specified maximum NSS index for 802.11ac mandatory rates. Before configuring the NSS index for 802.11ac multicast rates, the maximum NSS index for 802.11ac mandatory rates must be configured. Besides, it must be configured together with the node below.
.1.3.6.1.4.1.11.2.14.11.15.2.75.8.1.1.15,HPN-ICF-DOT11-RRM-MIB::hpnicfDot11RRM11acMultiCastVhtMcs,Integer32,read-write,,current,,Specify the MCS index for 802.11ac multicast rates. The value 255 indicates that no MCS index is specified. No MCS index is specified for 802.11ac multicast rates by default. Besides, it must be configured together with the node above.
.1.3.6.1.4.1.11.2.14.11.15.2.75.8.1.2,HPN-ICF-DOT11-RRM-MIB::hpnicfDot11RRMRadioCfgTable,,not-accessible,,current,,Configure WLAN RRM based radio type. When 802.11b parameter is modified, 802.11g parameter will be changed at the same time. In the same way, when 802.11g parameter is modified, 802.11b parameter will be changed at the same time.
.1.3.6.1.4.1.11.2.14.11.15.2.75.8.1.2.1,HPN-ICF-DOT11-RRM-MIB::hpnicfDot11RRMRadioCfgEntry,,not-accessible,hpnicfDot11RRMRadioType,current,,Configure WLAN RRM based radio type. When 802.11b parameter is modified, 802.11g parameter will be changed at the same time. In the same way, when 802.11g parameter is modified, 802.11b parameter will be changed at the same time.
.1.3.6.1.4.1.11.2.14.11.15.2.75.8.1.2.1.1,HPN-ICF-DOT11-RRM-MIB::hpnicfDot11RRMRadioType,INTEGER,not-accessible,,current,dot11a(1):dot11b(2):dot11g(4):dot11n(8):dot11gn(16):dot11an(32):dot11ac(64),802.11 radio type.
.1.3.6.1.4.1.11.2.14.11.15.2.75.8.1.2.1.2,HPN-ICF-DOT11-RRM-MIB::hpnicfDot11RRMCfgChlState,INTEGER,read-write,,current,true(1):false(2),Enable/Disable dynamic channel selection.
.1.3.6.1.4.1.11.2.14.11.15.2.75.8.1.2.1.3,HPN-ICF-DOT11-RRM-MIB::hpnicfDot11RRMCfgChlMode,INTEGER,read-write,,current,selfDecisive(1):userTriggered(2),Configure the mode of channel selection. This node can be configured only when dynamic channel selection is enabled.
.1.3.6.1.4.1.11.2.14.11.15.2.75.8.1.2.1.4,HPN-ICF-DOT11-RRM-MIB::hpnicfDot11RRMChlProntoRadioElmt,Unsigned32,read-write,,current,,Specify the AP and radio that will change channel at next calibration cycle. 0 is returned when getting the value of this node. This node can be configured only when the mode of channel selection control is user-triggered. When configuring, the higher 24 bits stand for the AP index, and the last 8 bits stand for the radio index. 4294967295 stand for configuring each radio on all APs.
.1.3.6.1.4.1.11.2.14.11.15.2.75.8.1.2.1.5,HPN-ICF-DOT11-RRM-MIB::hpnicfDot11RRMCfgPwrState,INTEGER,read-write,,current,true(1):false(2),Enable/Disable dynamic power selection for the band.
.1.3.6.1.4.1.11.2.14.11.15.2.75.8.1.2.1.6,HPN-ICF-DOT11-RRM-MIB::hpnicfDot11RRMCfgPwrMode,INTEGER,read-write,,current,selfDecisive(1):userTriggered(2),Configure the mode of transmit power control. This node can be configured only when dynamic power selection is enabled.
.1.3.6.1.4.1.11.2.14.11.15.2.75.8.1.2.1.7,HPN-ICF-DOT11-RRM-MIB::hpnicfDot11RRMPwrProntoRadioElmt,Unsigned32,read-write,,current,,Specify the AP and radio that will change power at next calibration cycle. 0 is returned when getting the value of this node. This node can be configured only when the mode of transmit power control is user-triggered. When configuring, the higher 24 bits stand for the AP index, and the last 8 bits stand for the radio index. 4294967295 stand for configuring each radio on all APs.
.1.3.6.1.4.1.11.2.14.11.15.2.75.8.1.2.1.8,HPN-ICF-DOT11-RRM-MIB::hpnicfDot11RRMCfgIntrvl,Integer32,read-write,,current,,Configure the calibration interval.
.1.3.6.1.4.1.11.2.14.11.15.2.75.8.1.2.1.9,HPN-ICF-DOT11-RRM-MIB::hpnicfDot11RRMCfgIntrfThres,Integer32,read-write,,current,,Configure the interface threshold. By default, interference observed on an operating channel is considered during dynamic frequency selection and transmit power control. If the interference percentage on the channel reaches the set threshold, RRM will perform resource adjustment to control the situation.
.1.3.6.1.4.1.11.2.14.11.15.2.75.8.1.2.1.10,HPN-ICF-DOT11-RRM-MIB::hpnicfDot11RRMCfgNoiseThres,Integer32,read-write,,current,,Configure the noise threshold.
.1.3.6.1.4.1.11.2.14.11.15.2.75.8.1.2.1.11,HPN-ICF-DOT11-RRM-MIB::hpnicfDot11RRMCfgPERThres,Integer32,read-write,,current,,Configure the CRC error threshold. If the percentage of CRC errors reaches the threshold, RRM will perform resource adjustment to control the situation.
.1.3.6.1.4.1.11.2.14.11.15.2.75.8.1.2.1.12,HPN-ICF-DOT11-RRM-MIB::hpnicfDot11RRMCfgToleranceFctr,Integer32,read-write,,current,,Configure the tolerance level. During dynamic frequency selection (DFS), the channel will be changed only if there is a better channel having lesser interference and packet error rate than those specified by the user.
.1.3.6.1.4.1.11.2.14.11.15.2.75.8.1.2.1.13,HPN-ICF-DOT11-RRM-MIB::hpnicfDot11RRMCfgAdjacencyFctr,Integer32,read-write,,current,,Configure the adjacency factor for the band. If transmit power control (TPC) is configured, power will be adjusted when the nth neighbor is detected. The value n is the adjacency factor.
.1.3.6.1.4.1.11.2.14.11.15.2.75.8.1.3,HPN-ICF-DOT11-RRM-MIB::hpnicfDot11RRMAPCfgTable,,not-accessible,,current,,This table defines the RRM parameters for AP.
.1.3.6.1.4.1.11.2.14.11.15.2.75.8.1.3.1,HPN-ICF-DOT11-RRM-MIB::hpnicfDot11RRMAPCfgEntry,,not-accessible,hpnicfDot11APElementIndex,current,,Each entry contains information of RRM parameters for AP.
.1.3.6.1.4.1.11.2.14.11.15.2.75.8.1.3.1.1,HPN-ICF-DOT11-RRM-MIB::hpnicfDot11RRMAPWorkMode,INTEGER,read-write,,current,normal(1):monitor(2):hybrid(3),AP work mode.
.1.3.6.1.4.1.11.2.14.11.15.2.75.8.1.4,HPN-ICF-DOT11-RRM-MIB::hpnicfDot11RRMSDRadioGroupTable,,not-accessible,,current,,This table defines RRM self-decisive radio group.
.1.3.6.1.4.1.11.2.14.11.15.2.75.8.1.4.1,HPN-ICF-DOT11-RRM-MIB::hpnicfDot11RRMSDRadioGroupEntry,,not-accessible,hpnicfDot11RRMSDRadioGroupId,current,,Each entry contains information of one RRM self-decisive radio group.
.1.3.6.1.4.1.11.2.14.11.15.2.75.8.1.4.1.1,HPN-ICF-DOT11-RRM-MIB::hpnicfDot11RRMSDRadioGroupId,Unsigned32,not-accessible,,current,,Represents RRM self-decisive radio group ID.
.1.3.6.1.4.1.11.2.14.11.15.2.75.8.1.4.1.2,HPN-ICF-DOT11-RRM-MIB::hpnicfDot11RRMSDRadioGroupDesc,OCTET,read-create,,current,,Represents the description of RRM self-decisive radio group.
.1.3.6.1.4.1.11.2.14.11.15.2.75.8.1.4.1.3,HPN-ICF-DOT11-RRM-MIB::hpnicfDot11RRMSDRdGrpChlHolddownTm,Unsigned32,read-create,,current,,Represents the channel holddown time of RRM self-decisive radio group.
.1.3.6.1.4.1.11.2.14.11.15.2.75.8.1.4.1.4,HPN-ICF-DOT11-RRM-MIB::hpnicfDot11RRMSDRdGrpPwrHolddownTm,Unsigned32,read-create,,current,,Represents the power holddown time of RRM self-decisive radio group.
.1.3.6.1.4.1.11.2.14.11.15.2.75.8.1.4.1.5,HPN-ICF-DOT11-RRM-MIB::hpnicfDot11RRMSDRdGroupRowStatus,INTEGER,read-create,,current,active(1):notInService(2):notReady(3):createAndGo(4):createAndWait(5):destroy(6),The row status of this table entry.
.1.3.6.1.4.1.11.2.14.11.15.2.75.8.1.5,HPN-ICF-DOT11-RRM-MIB::hpnicfDot11RRMAPCfg2Table,,not-accessible,,current,,This table defines the RRM parameters for AP.
.1.3.6.1.4.1.11.2.14.11.15.2.75.8.1.5.1,HPN-ICF-DOT11-RRM-MIB::hpnicfDot11RRMAPCfg2Entry,,not-accessible,hpnicfDot11RRMAPSerialID,current,,Each entry contains information of RRM parameters for AP.
.1.3.6.1.4.1.11.2.14.11.15.2.75.8.1.5.1.1,HPN-ICF-DOT11-RRM-MIB::hpnicfDot11RRMAPSerialID,OCTET,not-accessible,,current,,Serial ID of the AP.
.1.3.6.1.4.1.11.2.14.11.15.2.75.8.1.5.1.2,HPN-ICF-DOT11-RRM-MIB::hpnicfDot11RRMAPIntfThreshold,Integer32,read-write,,current,,Represents threshold of AP interference . If the number of AP interference exceeds this threshold, AP interference trap will be sent.
.1.3.6.1.4.1.11.2.14.11.15.2.75.8.1.5.1.3,HPN-ICF-DOT11-RRM-MIB::hpnicfDot11RRMStaIntfThreshold,Integer32,read-write,,current,,Represents threshold of STA interference. If the number of STA interference exceeds this threshold, station interference trap will be sent.
.1.3.6.1.4.1.11.2.14.11.15.2.75.8.1.5.1.4,HPN-ICF-DOT11-RRM-MIB::hpnicfDot11RRMCoChlIntfTrapThhd,Integer32,read-write,,current,,Represents threshold of interference trap with current ap. If signal strength of the device exceeds this threshold, corresponding trap will be sent.
.1.3.6.1.4.1.11.2.14.11.15.2.75.8.1.5.1.5,HPN-ICF-DOT11-RRM-MIB::hpnicfDot11RRMAdjChlIntfTrapThhd,Integer32,read-write,,current,,Represents threshold of adjacent interference trap with current ap. If signal strength of the device exceeds this threshold, corresponding trap will be sent.
.1.3.6.1.4.1.11.2.14.11.15.2.75.8.2,HPN-ICF-DOT11-RRM-MIB::hpnicfDot11RRMDetectGroup,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.2.75.8.2.1,HPN-ICF-DOT11-RRM-MIB::hpnicfDot11RRMChlRptTable,,not-accessible,,current,,This table shows the RRM channel information of each radio on all APs.
.1.3.6.1.4.1.11.2.14.11.15.2.75.8.2.1.1,HPN-ICF-DOT11-RRM-MIB::hpnicfDot11RRMChlRptEntry,,not-accessible,hpnicfDot11RRMRadioIndex:hpnicfDot11RRMChlRptChlNum,current,,Each entry contains information of RRM channel information of the radio on the AP.
.1.3.6.1.4.1.11.2.14.11.15.2.75.8.2.1.1.1,HPN-ICF-DOT11-RRM-MIB::hpnicfDot11RRMRadioIndex,Unsigned32,accessible-for-notify,,current,,Represents index of the radio.
.1.3.6.1.4.1.11.2.14.11.15.2.75.8.2.1.1.2,HPN-ICF-DOT11-RRM-MIB::hpnicfDot11RRMChlRptChlNum,Integer32,accessible-for-notify,,current,,Channel number.
.1.3.6.1.4.1.11.2.14.11.15.2.75.8.2.1.1.3,HPN-ICF-DOT11-RRM-MIB::hpnicfDot11RRMChlRptChlType,INTEGER,read-only,,current,primeChannel(1):offChannel(2),Channel type.
.1.3.6.1.4.1.11.2.14.11.15.2.75.8.2.1.1.4,HPN-ICF-DOT11-RRM-MIB::hpnicfDot11RRMChlRptChlQlty,INTEGER,read-only,,current,good(1):bad(2),Channel quality.
.1.3.6.1.4.1.11.2.14.11.15.2.75.8.2.1.1.5,HPN-ICF-DOT11-RRM-MIB::hpnicfDot11RRMChlRptNbrCnt,Integer32,read-only,,current,,Number of neighbors found on the channel.
.1.3.6.1.4.1.11.2.14.11.15.2.75.8.2.1.1.6,HPN-ICF-DOT11-RRM-MIB::hpnicfDot11RRMChlRptLoad,Integer32,read-only,,current,,Load observed on the channel in percentage.
.1.3.6.1.4.1.11.2.14.11.15.2.75.8.2.1.1.7,HPN-ICF-DOT11-RRM-MIB::hpnicfDot11RRMChlRptUtlz,Integer32,read-only,,current,,Utilization of the channel in percentage.
.1.3.6.1.4.1.11.2.14.11.15.2.75.8.2.1.1.8,HPN-ICF-DOT11-RRM-MIB::hpnicfDot11RRMChlRptIntrf,Integer32,read-only,,current,,Interference observed on the channel in percentage.
.1.3.6.1.4.1.11.2.14.11.15.2.75.8.2.1.1.9,HPN-ICF-DOT11-RRM-MIB::hpnicfDot11RRMChlRptPER,Integer32,read-only,,current,,Packet error rate observed on the channel in percentage.
.1.3.6.1.4.1.11.2.14.11.15.2.75.8.2.1.1.10,HPN-ICF-DOT11-RRM-MIB::hpnicfDot11RRMChlRptRetryRate,Integer32,read-only,,current,,Percentage of retransmission happened on the channel.
.1.3.6.1.4.1.11.2.14.11.15.2.75.8.2.1.1.11,HPN-ICF-DOT11-RRM-MIB::hpnicfDot11RRMChlRptNoise,Integer32,read-only,,current,,Noise observed on the channel.
.1.3.6.1.4.1.11.2.14.11.15.2.75.8.2.1.1.12,HPN-ICF-DOT11-RRM-MIB::hpnicfDot11RRMChlRptRadarIndtcr,INTEGER,read-write,,current,detected(1):notDetected(2),Radar detection status.
.1.3.6.1.4.1.11.2.14.11.15.2.75.8.2.2,HPN-ICF-DOT11-RRM-MIB::hpnicfDot11RRMNbrInfoTable,,not-accessible,,current,,This table shows the RRM neighbor information of each radio on all APs.
.1.3.6.1.4.1.11.2.14.11.15.2.75.8.2.2.1,HPN-ICF-DOT11-RRM-MIB::hpnicfDot11RRMNbrInfoEntry,,not-accessible,hpnicfDot11RRMRadioIndex:hpnicfDot11RrmNbrBSSID,current,,Each entry contains information of RRM neighbor information of the radio on an AP.
.1.3.6.1.4.1.11.2.14.11.15.2.75.8.2.2.1.1,HPN-ICF-DOT11-RRM-MIB::hpnicfDot11RrmNbrBSSID,OCTET,not-accessible,,current,,MAC address of the AP.
.1.3.6.1.4.1.11.2.14.11.15.2.75.8.2.2.1.2,HPN-ICF-DOT11-RRM-MIB::hpnicfDot11RrmNbrChl,Integer32,read-only,,current,,Channel number on which the neighbor was found.
.1.3.6.1.4.1.11.2.14.11.15.2.75.8.2.2.1.3,HPN-ICF-DOT11-RRM-MIB::hpnicfDot11RRMNbrIntrf,Integer32,read-only,,current,,Interference observed on the channel in percentage by neighbor.
.1.3.6.1.4.1.11.2.14.11.15.2.75.8.2.2.1.4,HPN-ICF-DOT11-RRM-MIB::hpnicfDot11RrmNbrRSSI,Integer32,read-only,,current,,Signal strength of the AP in dBm.
.1.3.6.1.4.1.11.2.14.11.15.2.75.8.2.2.1.5,HPN-ICF-DOT11-RRM-MIB::hpnicfDot11RrmNbrType,INTEGER,read-only,,current,managed(1):unmanaged(2),Type of the AP, managed or unmanaged.
.1.3.6.1.4.1.11.2.14.11.15.2.75.8.2.2.1.6,HPN-ICF-DOT11-RRM-MIB::hpnicfDot11RrmNbrSSID,OCTET,read-only,,current,,SSID of the Neighbor.
.1.3.6.1.4.1.11.2.14.11.15.2.75.8.2.3,HPN-ICF-DOT11-RRM-MIB::hpnicfDot11RRMHistoryTable,,not-accessible,,current,,This table shows the details of the latest three channel changes and power changes applied on all APs, including time of change, reason of the change and the channel, power, interference parameters.
.1.3.6.1.4.1.11.2.14.11.15.2.75.8.2.3.1,HPN-ICF-DOT11-RRM-MIB::hpnicfDot11RRMHistoryEntry,,not-accessible,hpnicfDot11RRMRadioIndex:hpnicfDot11RRMHistoryId:hpnicfDot11RRMHistoryRecIndctr,current,,Each entry shows the details of channel and power changes.
.1.3.6.1.4.1.11.2.14.11.15.2.75.8.2.3.1.1,HPN-ICF-DOT11-RRM-MIB::hpnicfDot11RRMHistoryId,Integer32,not-accessible,,current,,History number of the change.
.1.3.6.1.4.1.11.2.14.11.15.2.75.8.2.3.1.2,HPN-ICF-DOT11-RRM-MIB::hpnicfDot11RRMHistoryRecIndctr,INTEGER,not-accessible,,current,before(1):after(2),History record type of the change.
.1.3.6.1.4.1.11.2.14.11.15.2.75.8.2.3.1.3,HPN-ICF-DOT11-RRM-MIB::hpnicfDot11RRMHistoryChl,Integer32,read-only,,current,,Channel on which the radio operates before/after the change of channel or power.
.1.3.6.1.4.1.11.2.14.11.15.2.75.8.2.3.1.4,HPN-ICF-DOT11-RRM-MIB::hpnicfDot11RRMHistoryPwr,Integer32,read-only,,current,,Power of the radio before/after the change of channel or power.
.1.3.6.1.4.1.11.2.14.11.15.2.75.8.2.3.1.5,HPN-ICF-DOT11-RRM-MIB::hpnicfDot11RRMHistoryLoad,Integer32,read-only,,current,,Load observed on the radio in percentage before/after the change of channel or power.
.1.3.6.1.4.1.11.2.14.11.15.2.75.8.2.3.1.6,HPN-ICF-DOT11-RRM-MIB::hpnicfDot11RRMHistoryUtlz,Integer32,read-only,,current,,Utilization of the radio in percentage before/after the change of channel or power.
.1.3.6.1.4.1.11.2.14.11.15.2.75.8.2.3.1.7,HPN-ICF-DOT11-RRM-MIB::hpnicfDot11RRMHistoryIntrf,Integer32,read-only,,current,,Interference observed on the radio in percentage before/after the change of channel or power.
.1.3.6.1.4.1.11.2.14.11.15.2.75.8.2.3.1.8,HPN-ICF-DOT11-RRM-MIB::hpnicfDot11RRMHistoryNoise,Integer32,read-only,,current,,Noise observed on the radio before/after the change of channel or power.
.1.3.6.1.4.1.11.2.14.11.15.2.75.8.2.3.1.9,HPN-ICF-DOT11-RRM-MIB::hpnicfDot11RRMHistoryPER,Integer32,read-only,,current,,Packet error rate observed on the radio in percentage before/after the change of channel or power.
.1.3.6.1.4.1.11.2.14.11.15.2.75.8.2.3.1.10,HPN-ICF-DOT11-RRM-MIB::hpnicfDot11RRMHistoryRetryRate,Integer32,read-only,,current,,Percentage of retransmission happened on the radio before/after the change of channel or power.
.1.3.6.1.4.1.11.2.14.11.15.2.75.8.2.3.1.11,HPN-ICF-DOT11-RRM-MIB::hpnicfDot11RRMHistoryChgReason,BITS,read-only,,current,others(0):coverage(1):radar(2):retransmission(3):packetsDiscarded(4):interference(5),Reason for the change of channel or power. The various bit positions are: |0 |Others | |1 |Coverage | |2 |Radar | |3 |Retransmission | |4 |Packets discarded | |5 |Interference | 0 is returned when the history record type is after.
.1.3.6.1.4.1.11.2.14.11.15.2.75.8.2.3.1.12,HPN-ICF-DOT11-RRM-MIB::hpnicfDot11RRMHistoryChgDateTime,OCTET,read-only,,current,,The time when the channel or power change occurred.
.1.3.6.1.4.1.11.2.14.11.15.2.75.8.2.4,HPN-ICF-DOT11-RRM-MIB::hpnicfDot11RRMRadioNbrInfoTable,,not-accessible,,current,,This table shows the RRM neighbor information of each radio on all APs.
.1.3.6.1.4.1.11.2.14.11.15.2.75.8.2.4.1,HPN-ICF-DOT11-RRM-MIB::hpnicfDot11RRMRadioNbrInfoEntry,,not-accessible,hpnicfDot11RRMRadioNbrAPID:hpnicfDot11RRMRadioNbrRadioID,current,,Each entry contains information of RRM neighbor information of the radio on an AP.
.1.3.6.1.4.1.11.2.14.11.15.2.75.8.2.4.1.1,HPN-ICF-DOT11-RRM-MIB::hpnicfDot11RRMRadioNbrAPID,OCTET,not-accessible,,current,,AP serial id.
.1.3.6.1.4.1.11.2.14.11.15.2.75.8.2.4.1.2,HPN-ICF-DOT11-RRM-MIB::hpnicfDot11RRMRadioNbrRadioID,Integer32,not-accessible,,current,,Radio Id on AP.
.1.3.6.1.4.1.11.2.14.11.15.2.75.8.2.4.1.3,HPN-ICF-DOT11-RRM-MIB::hpnicfDot11RRMRadioNbrSSID,OCTET,read-only,,current,,All neighbour SSIDs scanned by the selected radio.
.1.3.6.1.4.1.11.2.14.11.15.2.75.8.3,HPN-ICF-DOT11-RRM-MIB::hpnicfDot11RRMNotifyGroup,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.2.75.8.3.1,HPN-ICF-DOT11-RRM-MIB::hpnicfDot11RRMChlQltyNotifications,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.2.75.8.3.1.0,HPN-ICF-DOT11-RRM-MIB::hpnicfDot11RRMChlQltyNtfPrefix,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.2.75.8.3.1.0.1,HPN-ICF-DOT11-RRM-MIB::hpnicfDot11RRMIntrfLimit,,,,,,This notification will be sent when interference on the radio exceeds the limit.
.1.3.6.1.4.1.11.2.14.11.15.2.75.8.3.1.0.2,HPN-ICF-DOT11-RRM-MIB::hpnicfDot11RRMPERLimit,,,,,,This notification will be sent when packet error rate on the radio exceeds the limit.
.1.3.6.1.4.1.11.2.14.11.15.2.75.8.3.1.0.3,HPN-ICF-DOT11-RRM-MIB::hpnicfDot11RRMNoiseLimit,,,,,,This notification will be sent when noise on the radio exceeds the limit.
.1.3.6.1.4.1.11.2.14.11.15.2.75.8.3.2,HPN-ICF-DOT11-RRM-MIB::hpnicfDot11RRMResChgNotifications,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.2.75.8.3.2.0,HPN-ICF-DOT11-RRM-MIB::hpnicfDot11RRMResChgNtfPrefix,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.2.75.8.3.2.0.1,HPN-ICF-DOT11-RRM-MIB::hpnicfDot11RRMPowerChange,,,,,,This notification will be sent when power changed on the radio automatically.
.1.3.6.1.4.1.11.2.14.11.15.2.75.8.3.3,HPN-ICF-DOT11-RRM-MIB::hpnicfDot11RRMNotificationsVar,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.2.75.8.3.3.1,HPN-ICF-DOT11-RRM-MIB::hpnicfDot11NewPower,Integer32,accessible-for-notify,,current,,Power of the radio after the change of power.
.1.3.6.1.4.1.11.2.14.11.15.2.75.8.3.3.2,HPN-ICF-DOT11-RRM-MIB::hpnicfDot11OldPower,Integer32,accessible-for-notify,,current,,Power of the radio before the change of power.
.1.3.6.1.4.1.11.2.14.11.15.2.75.8.4,HPN-ICF-DOT11-RRM-MIB::hpnicfDot11MonitorDetectedGroup,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.2.75.8.4.1,HPN-ICF-DOT11-RRM-MIB::hpnicfDot11MonitorDetectedDevTable,,not-accessible,,current,,This table shows the devices of AP detected
.1.3.6.1.4.1.11.2.14.11.15.2.75.8.4.1.1,HPN-ICF-DOT11-RRM-MIB::hpnicfDot11MonitorDetectedDevEntry,,not-accessible,hpnicfDot11MonitorDevMAC:hpnicfDot11APElementIndex,current,,Each entry contains information of detected devices.
.1.3.6.1.4.1.11.2.14.11.15.2.75.8.4.1.1.1,HPN-ICF-DOT11-RRM-MIB::hpnicfDot11MonitorDevMAC,OCTET,not-accessible,,current,,Represents MAC address of the device detected.
.1.3.6.1.4.1.11.2.14.11.15.2.75.8.4.1.1.2,HPN-ICF-DOT11-RRM-MIB::hpnicfDot11MonitorDevType,INTEGER,read-only,,current,client(1):ap(2):adhoc(3):wirelessBridge(4):unknown(5),Represents type of the device detected.
.1.3.6.1.4.1.11.2.14.11.15.2.75.8.4.1.1.3,HPN-ICF-DOT11-RRM-MIB::hpnicfDot11MonitorDevVendor,OCTET,read-only,,current,,Represents vendor of the detected device.
.1.3.6.1.4.1.11.2.14.11.15.2.75.8.4.1.1.4,HPN-ICF-DOT11-RRM-MIB::hpnicfDot11MonitorDevSSID,OCTET,read-only,,current,,Represents the service set identifier for the ESS of the device which type is ap or adhoc.
.1.3.6.1.4.1.11.2.14.11.15.2.75.8.4.1.1.5,HPN-ICF-DOT11-RRM-MIB::hpnicfDot11MonitorDevBSSID,OCTET,read-only,,current,,Represents the basic service set identifier of the detected device.
.1.3.6.1.4.1.11.2.14.11.15.2.75.8.4.1.1.6,HPN-ICF-DOT11-RRM-MIB::hpnicfDot11MonitorDevChannel,Integer32,read-only,,current,,Represents the channel in which the device was last detected. AP will choose the channel which has maximum signal strength as effective channel, as there is interference between adjacent channels.
.1.3.6.1.4.1.11.2.14.11.15.2.75.8.4.1.1.7,HPN-ICF-DOT11-RRM-MIB::hpnicfDot11MonitorRadioId,Integer32,read-only,,current,,Represents the radio ID of the AP that detected the device.
.1.3.6.1.4.1.11.2.14.11.15.2.75.8.4.1.1.8,HPN-ICF-DOT11-RRM-MIB::hpnicfDot11MonitorDevMaxRSSI,Integer32,read-only,,current,,Represents the maximum detected RSSI of the device in a scan report cycle.
.1.3.6.1.4.1.11.2.14.11.15.2.75.8.4.1.1.9,HPN-ICF-DOT11-RRM-MIB::hpnicfDot11MonitorDevBeaconIntvl,Integer32,read-only,,current,,Represents the beacon interval for the detected device(not include the device which type is client).
.1.3.6.1.4.1.11.2.14.11.15.2.75.8.4.1.1.10,HPN-ICF-DOT11-RRM-MIB::hpnicfDot11MonitorDevFstDctTime,OCTET,read-only,,current,,Represents the time at which the device was first detected.
.1.3.6.1.4.1.11.2.14.11.15.2.75.8.4.1.1.11,HPN-ICF-DOT11-RRM-MIB::hpnicfDot11MonitorDevLstDctTime,OCTET,read-only,,current,,Represents the time at which the device was detected last time.
.1.3.6.1.4.1.11.2.14.11.15.2.75.8.4.1.1.12,HPN-ICF-DOT11-RRM-MIB::hpnicfDot11MonitorDevClear,INTEGER,read-write,,current,true(1):false(2),This object is used to clear the information of the device detected in the WLAN. It will return false for get operation.
.1.3.6.1.4.1.11.2.14.11.15.2.75.8.4.1.1.13,HPN-ICF-DOT11-RRM-MIB::hpnicfDot11MonitorDevSNR,Integer32,read-only,,current,,Represents the SNR of the device in a scan report cycle.
.1.3.6.1.4.1.11.2.14.11.15.2.75.9,HPN-ICF-DOT11-QOS-MIB::hpnicfDot11QoS,,,,,,This MIB provides information about WLAN QoS configuration. GLOSSARY IEEE 802.11 Standard to encourage interoperability among wireless networking equipment. WMM WMM is a wireless QoS protocol designed to preferentially transmit packets with high priority, thus guaranteeing better QoS services for voice and video applications in a wireless network. EDCA Enhanced distributed channel access (EDCA) is a channel contention mechanism designed by WMM to preferentially transmit packets with high priority and allocate more bandwidth to such packets. AC Access category (AC), is used for channel contention. WMM defines four access categories; they are AC-VO (voice), AC-VI (video), AC-BE (best-effort), and AC-BK (background) in the descending order of priority. When contending for a channel, a high-priority AC preempts a low-priority AC. CAC Connection admission control (CAC) limits the number of clients that are using high-priority ACs (AC-VO and AC-VI) to guarantee sufficient bandwidth for existing high-priority traffic. U-APSD Unscheduled automatic power-save delivery (U-APSD) is a new power saving mechanism defined by WMM to enhance the power saving capability of clients. SVP SpectraLink voice priority (SVP) is a voice priority protocol designed by the Spectralink company to guarantee QoS for voice traffic.
.1.3.6.1.4.1.11.2.14.11.15.2.75.9.1,HPN-ICF-DOT11-QOS-MIB::hpnicfDot11WmmCfgGroup,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.2.75.9.1.1,HPN-ICF-DOT11-QOS-MIB::hpnicfDot11RadioWmmCfgTable,,not-accessible,,current,,The table defines the basic parameters for WMM configuration.
.1.3.6.1.4.1.11.2.14.11.15.2.75.9.1.1.1,HPN-ICF-DOT11-QOS-MIB::hpnicfDot11RadioWmmCfgEntry,,not-accessible,hpnicfDot11WmmRadioIndex,current,,This entry contains the basic information for WMM configuration.
.1.3.6.1.4.1.11.2.14.11.15.2.75.9.1.1.1.1,HPN-ICF-DOT11-QOS-MIB::hpnicfDot11WmmRadioIndex,Unsigned32,not-accessible,,current,,Represents index of the radio.
.1.3.6.1.4.1.11.2.14.11.15.2.75.9.1.1.1.2,HPN-ICF-DOT11-QOS-MIB::hpnicfDot11RadioWmmEnabled,INTEGER,read-write,,current,true(1):false(2),Represents the status of WMM in radio. 'true' : The WMM function is enabled. 'false': The WMM function is disabled.
.1.3.6.1.4.1.11.2.14.11.15.2.75.9.1.1.1.3,HPN-ICF-DOT11-QOS-MIB::hpnicfDot11RadioSVPMapToAC,INTEGER,read-write,,current,acbk(1):acbe(2):acvi(3):acvo(4):disable(5),Represents the AC level which SVP packets are assigned to. 'acbk' : Specifies the AC-BK (background traffic) queue. 'acbe' : Specifies the AC-BE (best-effort traffic) queue. 'acvi' : Specifies the AC-VI (video traffic) queue. 'acvo' : Specifies the AC-VO (voice traffic) queue. 'disable' : Disable SVP packet mapping.
.1.3.6.1.4.1.11.2.14.11.15.2.75.9.1.1.1.4,HPN-ICF-DOT11-QOS-MIB::hpnicfDot11RadioCacPolicy,INTEGER,read-write,,current,channelUtilization(1):userNumber(2),Represents the policy for CAC. CAC requires that a client obtain permission of the AP before it can use a high-priority AC for transmission, thus guaranteeing bandwidth to the clients that have gained access. CAC controls real time traffic (AC-VO and AC-VI traffic) but not common data traffic (AC-BE and AC-BK traffic).
.1.3.6.1.4.1.11.2.14.11.15.2.75.9.1.1.1.5,HPN-ICF-DOT11-QOS-MIB::hpnicfDot11RadioCacChlUtlValue,Integer32,read-write,,current,,Represents Maximum channel utilization rate, that is, the medium time of the accepted AC-VO traffic and AC-VI traffic to the valid time during the unit time. This object can be set only if the value of hpnicfDot11RadioCacPolicy is ChannelUtilization.
.1.3.6.1.4.1.11.2.14.11.15.2.75.9.1.1.1.6,HPN-ICF-DOT11-QOS-MIB::hpnicfDot11RadioCacUserNum,Integer32,read-write,,current,,Represents the users-based admission policy for CAC. This object can be set only if the value of hpnicfDot11RadioCacPolicy is userNumber.
.1.3.6.1.4.1.11.2.14.11.15.2.75.9.1.2,HPN-ICF-DOT11-QOS-MIB::hpnicfDot11RadioWmmEdcaCfgTable,,not-accessible,,current,,The table defines the basic parameters for EDCA configuration of radio.
.1.3.6.1.4.1.11.2.14.11.15.2.75.9.1.2.1,HPN-ICF-DOT11-QOS-MIB::hpnicfDot11RadioWmmEdcaCfgEntry,,not-accessible,hpnicfDot11WmmRadioIndex:hpnicfDot11RadioWmmAC,current,,This entry contains the basic information for EDCA configuration of radio.
.1.3.6.1.4.1.11.2.14.11.15.2.75.9.1.2.1.1,HPN-ICF-DOT11-QOS-MIB::hpnicfDot11RadioWmmAC,INTEGER,not-accessible,,current,acbk(1):acbe(2):acvi(3):acvo(4),Represents the AC level index of EDCA parameters of radio. 'acbk' : Specifies AC-BK (background traffic). 'acbe' : Specifies AC-BE (best-effort traffic). 'acvi' : Specifies AC-VI (video traffic). 'acvo' : Specifies AC-VO (voice traffic).
.1.3.6.1.4.1.11.2.14.11.15.2.75.9.1.2.1.2,HPN-ICF-DOT11-QOS-MIB::hpnicfDot11RadioWmmAifsn,Integer32,read-write,,current,,Represents AIFSN parameter of EDCA. The value range of this object is limited by the radio chip capability.
.1.3.6.1.4.1.11.2.14.11.15.2.75.9.1.2.1.3,HPN-ICF-DOT11-QOS-MIB::hpnicfDot11RadioWmmEcwMin,Integer32,read-write,,current,,Represents ECWmin parameter of EDCA. The value range of this object is limited by the radio chip capability. ECWmin parameter of EDCA must be smaller than ECWmax parameter.
.1.3.6.1.4.1.11.2.14.11.15.2.75.9.1.2.1.4,HPN-ICF-DOT11-QOS-MIB::hpnicfDot11RadioWmmEcwMax,Integer32,read-write,,current,,Represents ECWmax parameter of EDCA. The value range of this object is limited by the radio chip capability. ECWmin parameter of EDCA must be larger than ECWmax parameter.
.1.3.6.1.4.1.11.2.14.11.15.2.75.9.1.2.1.5,HPN-ICF-DOT11-QOS-MIB::hpnicfDot11RadioWmmTxoplimit,Integer32,read-write,,current,,Represents TXOPLimit parameter of EDCA, the value must be in the range of 0 to 65535 (in units of 32 microseconds). The TXOP value of 0 indicates that only one MPDU can be transmitted. The range of this argument is limited by the radio chip capability.
.1.3.6.1.4.1.11.2.14.11.15.2.75.9.1.2.1.6,HPN-ICF-DOT11-QOS-MIB::hpnicfDot11RadioWmmNoAck,INTEGER,read-write,,current,true(1):false(2),Represents the AC to adopt the No ACK policy. The protocol defines two ACK policies: Normal ACK and No ACK.
.1.3.6.1.4.1.11.2.14.11.15.2.75.9.1.3,HPN-ICF-DOT11-QOS-MIB::hpnicfDot11StationWmmEdcaTable,,not-accessible,,current,,The table defines the basic parameters for EDCA configuration of station.
.1.3.6.1.4.1.11.2.14.11.15.2.75.9.1.3.1,HPN-ICF-DOT11-QOS-MIB::hpnicfDot11StationWmmEdcaEntry,,not-accessible,hpnicfDot11WmmRadioIndex:hpnicfDot11StationWmmAC,current,,This entry contains the basic information for EDCA configuration of client. If CAC is enabled for an AC, CAC is also enabled for ACs with higher priority. For example, if CAC is enabled for AC-VI, CAC is also enabled for AC-VO. However, enabling CAC for AC-VO does not enable CAC for AC-VI.
.1.3.6.1.4.1.11.2.14.11.15.2.75.9.1.3.1.1,HPN-ICF-DOT11-QOS-MIB::hpnicfDot11StationWmmAC,INTEGER,not-accessible,,current,acbk(1):acbe(2):acvi(3):acvo(4),Represents the AC level index of EDCA parameters of client. 'acbk' : Specifies AC-BK (background traffic). 'acbe' : Specifies AC-BE (best-effort traffic). 'acvi' : Specifies AC-VI (video traffic). 'acvo' : Specifies AC-VO (voice traffic).
.1.3.6.1.4.1.11.2.14.11.15.2.75.9.1.3.1.2,HPN-ICF-DOT11-QOS-MIB::hpnicfDot11StationWmmAifsn,Integer32,read-write,,current,,Represents AIFSN parameter of EDCA.
.1.3.6.1.4.1.11.2.14.11.15.2.75.9.1.3.1.3,HPN-ICF-DOT11-QOS-MIB::hpnicfDot11StationWmmEcwMin,Integer32,read-write,,current,,Represents ECWmin parameter of EDCA.
.1.3.6.1.4.1.11.2.14.11.15.2.75.9.1.3.1.4,HPN-ICF-DOT11-QOS-MIB::hpnicfDot11StationWmmEcwMax,Integer32,read-write,,current,,Represents ECWmax parameter of EDCA.
.1.3.6.1.4.1.11.2.14.11.15.2.75.9.1.3.1.5,HPN-ICF-DOT11-QOS-MIB::hpnicfDot11StationWmmTxoplimit,Integer32,read-write,,current,,Represents TXOPLimit parameter of EDCA, the value is in units of 32 microseconds. The TXOP value of 0 indicates that only one MPDU can be transmitted.
.1.3.6.1.4.1.11.2.14.11.15.2.75.9.1.3.1.6,HPN-ICF-DOT11-QOS-MIB::hpnicfDot11StationWmmCacEnabled,INTEGER,read-write,,current,true(1):false(2),Represents the AC to adopt the No ACK policy. The protocol defines two ACK policies: Normal ACK and No ACK. Only if the value of hpnicfDot11StationWmmAC is 'acvo' or 'acvi', Cac can be set correctly here.
.1.3.6.1.4.1.11.2.14.11.15.2.75.9.1.4,HPN-ICF-DOT11-QOS-MIB::hpnicfDot11WmmResetGroup,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.2.75.9.1.4.1,HPN-ICF-DOT11-QOS-MIB::hpnicfDot11WmmResetRadioByAP,Integer32,read-write,,current,,Clear the WMM statistics information of the radio of the specified AP or all radios. The meaning of this object is the same as hpnicfDot11APElementIndex, it represents the index of AP element. If the value of this object is set to 0xFFFFFFFF, WMM statistics information of all radios will be cleared. The value of this object is always 0 with the get operation.
.1.3.6.1.4.1.11.2.14.11.15.2.75.9.1.4.2,HPN-ICF-DOT11-QOS-MIB::hpnicfDot11WmmResetStationByAP,Integer32,read-write,,current,,Clear the WMM statistics information of the clients associated with the specified AP, or of all clients. The meaning of this object is the same as hpnicfDot11APElementIndex, it represents the index of AP element. If set with the 0xFFFFFFFF, it will clear the WMM statistics information of all clients. The value of this object is always 0 with the get operation.
.1.3.6.1.4.1.11.2.14.11.15.2.75.9.1.5,HPN-ICF-DOT11-QOS-MIB::hpnicfDot11RadioWmmEdcaCfg2Table,,not-accessible,,current,,The table defines the basic parameters for EDCA configuration of radio.
.1.3.6.1.4.1.11.2.14.11.15.2.75.9.1.5.1,HPN-ICF-DOT11-QOS-MIB::hpnicfDot11RadioWmmEdcaCfg2Entry,,not-accessible,hpnicfDot11WMMAPSerialID:hpnicfDot11WMMRdId:hpnicfDot11RdWmmAC,current,,This entry contains the basic information for EDCA configuration of radio.
.1.3.6.1.4.1.11.2.14.11.15.2.75.9.1.5.1.1,HPN-ICF-DOT11-QOS-MIB::hpnicfDot11WMMAPSerialID,OCTET,not-accessible,,current,,Serial ID of the AP.
.1.3.6.1.4.1.11.2.14.11.15.2.75.9.1.5.1.2,HPN-ICF-DOT11-QOS-MIB::hpnicfDot11WMMRdId,Integer32,not-accessible,,current,,radio ID of the radio.
.1.3.6.1.4.1.11.2.14.11.15.2.75.9.1.5.1.3,HPN-ICF-DOT11-QOS-MIB::hpnicfDot11RdWmmAC,INTEGER,not-accessible,,current,acbk(1):acbe(2):acvi(3):acvo(4),Represents the AC level index of EDCA parameters of radio. 'acbk' : Specifies AC-BK (background traffic). 'acbe' : Specifies AC-BE (best-effort traffic). 'acvi' : Specifies AC-VI (video traffic). 'acvo' : Specifies AC-VO (voice traffic).
.1.3.6.1.4.1.11.2.14.11.15.2.75.9.1.5.1.4,HPN-ICF-DOT11-QOS-MIB::hpnicfDot11RdWmmAifsn,Integer32,read-write,,current,,Represents AIFSN parameter of EDCA. The value range of this object is limited by the radio chip capability.
.1.3.6.1.4.1.11.2.14.11.15.2.75.9.1.5.1.5,HPN-ICF-DOT11-QOS-MIB::hpnicfDot11RdWmmEcwMin,Integer32,read-write,,current,,Represents ECWmin parameter of EDCA. The value range of this object is limited by the radio chip capability. ECWmin parameter of EDCA must be smaller than ECWmax parameter.
.1.3.6.1.4.1.11.2.14.11.15.2.75.9.1.5.1.6,HPN-ICF-DOT11-QOS-MIB::hpnicfDot11RdWmmEcwMax,Integer32,read-write,,current,,Represents ECWmax parameter of EDCA. The value range of this object is limited by the radio chip capability. ECWmin parameter of EDCA must be larger than ECWmax parameter.
.1.3.6.1.4.1.11.2.14.11.15.2.75.9.1.5.1.7,HPN-ICF-DOT11-QOS-MIB::hpnicfDot11RdWmmTxoplimit,Integer32,read-write,,current,,Represents TXOPLimit parameter of EDCA, the value must be in the range of 0 to 65535 (in units of 32 microseconds). The TXOP value of 0 indicates that only one MPDU can be transmitted. The range of this argument is limited by the radio chip capability.
.1.3.6.1.4.1.11.2.14.11.15.2.75.10,HPN-ICF-DOT11-ROAM-MIB::hpnicfDot11ROAM,,,,,,This MIB provides information about WLAN roaming configuration. GLOSSARY IEEE 802.11 Standard to encourage interoperability among wireless networking equipment. Access point (AP) Transmitter/receiver (transceiver) device that commonly connects and transports data between a wireless network and a wired network. Access control (AC) To control and manage multi-APs, it will bridge wireless and wired network. BSS IEEE 802.11 Basic Service Set (Radio Cell). The BSS of an AP comprises of the stations directly associating with the AP. Radio The chip set to receive and send wireless signal. HA The AC to which a wireless station is connected by associating with an AP for the first time is the HA of the station. FA An AC that is other than the HA and to which a station is currently connected is an FA of the station. Fast-roam capable station A wireless station which directly associates to a fast-roam service (rsn+dot1X) with one AC for the first time. Roam-out station A wireless station which has associated with an AC other than the HA in the mobility-group is referred to as a roam-out station at its HA. Roam-in station A wireless station which has associated with an AC other than the HA in the mobility-group is referred to as a roam-in station at the FA. Intra-AC roaming A procedure where a wireless station roams from one AP to another AP, which are connected to the same AC. Inter-AC roaming A procedure where a wireless station roams from one AP to another AP, which are connected to different ACs. Inter-AC fast roaming capability If a station uses 802.1x (RSN) authentication through negotiation, this station has inter-AC fast roaming capability. WLAN-tunnel One type of layer 2 interface which is bound with an IACTP data tunnel and used to tunnel unicast/broadcast frames between ACs.
.1.3.6.1.4.1.11.2.14.11.15.2.75.10.1,HPN-ICF-DOT11-ROAM-MIB::hpnicfDot11RoamCfgGroup,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.2.75.10.1.1,HPN-ICF-DOT11-ROAM-MIB::hpnicfDot11MobGrpTable,,not-accessible,,current,,The table defines the parameters for roaming group configuration.
.1.3.6.1.4.1.11.2.14.11.15.2.75.10.1.1.1,HPN-ICF-DOT11-ROAM-MIB::hpnicfDot11MobGrpEntry,,not-accessible,hpnicfDot11MobGrpName,current,,This entry contains information of mobile group.
.1.3.6.1.4.1.11.2.14.11.15.2.75.10.1.1.1.1,HPN-ICF-DOT11-ROAM-MIB::hpnicfDot11MobGrpName,OCTET,not-accessible,,current,,Represents the name of roam group.
.1.3.6.1.4.1.11.2.14.11.15.2.75.10.1.1.1.2,HPN-ICF-DOT11-ROAM-MIB::hpnicfdot11MobGrpTunnelType,INTEGER,read-create,,current,ipv4(1):ipv6(2),Represents the protocol type of mobility-tunnel.
.1.3.6.1.4.1.11.2.14.11.15.2.75.10.1.1.1.3,HPN-ICF-DOT11-ROAM-MIB::hpnicfDot11MobGrpSrcIPAddr,OCTET,read-create,,current,,Represents the IP address of tunnel source. The IP address type must be the same as hpnicfdot11MobGrpTunnelType. The default value is zero.
.1.3.6.1.4.1.11.2.14.11.15.2.75.10.1.1.1.4,HPN-ICF-DOT11-ROAM-MIB::hpnicfDot11MobGrpAuthMode,INTEGER,read-create,,current,none(1):md5(2),Represents the authentication mode of IACTP tunnel. This object can be used to enable IACTP control message integrity authentication.
.1.3.6.1.4.1.11.2.14.11.15.2.75.10.1.1.1.5,HPN-ICF-DOT11-ROAM-MIB::hpnicfDot11MobGrpAuthKey,OCTET,read-create,,current,,Represents the authentication key of IACTP tunnel. Authentication key to be used with the given authentication method. This object can not be modified when the value of hpnicfDot11MobGrpAuthMode is 'none'.
.1.3.6.1.4.1.11.2.14.11.15.2.75.10.1.1.1.6,HPN-ICF-DOT11-ROAM-MIB::hpnicfDot11MobGrpEnable,INTEGER,read-create,,current,true(1):false(2),State of a mobile group. 'true' : The WLAN mobility group will be enabled. 'false' : The inter-AC tunnel communication for the mobility group will be disabled. A mobility group can be enabled only when the source IP address is configured. The other objects in this entry can become effective only when mobility group is enabled. The other objects in this entry can not be modified after enabling mobility group.
.1.3.6.1.4.1.11.2.14.11.15.2.75.10.1.1.1.7,HPN-ICF-DOT11-ROAM-MIB::hpnicfDot11MobGrpRowStatus,INTEGER,read-create,,current,active(1):notInService(2):notReady(3):createAndGo(4):createAndWait(5):destroy(6),The status of this table entry.
.1.3.6.1.4.1.11.2.14.11.15.2.75.10.1.2,HPN-ICF-DOT11-ROAM-MIB::hpnicfDot11MobGrpMemberTable,,not-accessible,,current,,The table defines the parameters for roaming member configuration.
.1.3.6.1.4.1.11.2.14.11.15.2.75.10.1.2.1,HPN-ICF-DOT11-ROAM-MIB::hpnicfDot11MobGrpMemberEntry,,not-accessible,hpnicfDot11MobGrpName:hpnicfDot11MobGrpMemberIpAddr,current,,This entry contains information of mobile group member.
.1.3.6.1.4.1.11.2.14.11.15.2.75.10.1.2.1.1,HPN-ICF-DOT11-ROAM-MIB::hpnicfDot11MobGrpMemberIpAddr,OCTET,not-accessible,,current,,Represents the IP address of group member. It can not be the same as the source IP address of the mobile group. The address type must be the same as the hpnicfdot11MobGrpTunnelType.
.1.3.6.1.4.1.11.2.14.11.15.2.75.10.1.2.1.2,HPN-ICF-DOT11-ROAM-MIB::hpnicfDot11MobGrpMemberStatus,INTEGER,read-only,,current,init(1):idle(2):joinRequestWait(3):joinResponseWait(4):joinConfirmWait(5):joinError(6):run(7),Represents the status of group member.
.1.3.6.1.4.1.11.2.14.11.15.2.75.10.1.2.1.3,HPN-ICF-DOT11-ROAM-MIB::hpnicfDot11MobGrpMemberIf,OCTET,read-only,,current,,Represents the tunnel interface name of group member.
.1.3.6.1.4.1.11.2.14.11.15.2.75.10.1.2.1.4,HPN-ICF-DOT11-ROAM-MIB::hpnicfDot11MobGrpMemberUpTime,Integer32,read-only,,current,,Represents the sustaining time from tunnel up. If tunnel is down, MemberUpTime is zero.
.1.3.6.1.4.1.11.2.14.11.15.2.75.10.1.2.1.5,HPN-ICF-DOT11-ROAM-MIB::hpnicfDot11MobGrpMemberRowStatus,INTEGER,read-create,,current,active(1):notInService(2):notReady(3):createAndGo(4):createAndWait(5):destroy(6),The status of this table entry.
.1.3.6.1.4.1.11.2.14.11.15.2.75.10.2,HPN-ICF-DOT11-ROAM-MIB::hpnicfDot11RoamStatusGroup,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.2.75.10.2.1,HPN-ICF-DOT11-ROAM-MIB::hpnicfDot11RoamInInfoTable,,not-accessible,,current,,The table can used to display the information of roaming in client.
.1.3.6.1.4.1.11.2.14.11.15.2.75.10.2.1.1,HPN-ICF-DOT11-ROAM-MIB::hpnicfDot11RoamInInfoEntry,,not-accessible,hpnicfDot11RoamClientMAC,current,,This entry contains information of roaming in client.
.1.3.6.1.4.1.11.2.14.11.15.2.75.10.2.1.1.1,HPN-ICF-DOT11-ROAM-MIB::hpnicfDot11RoamClientMAC,OCTET,not-accessible,,current,,Represents the MAC address of roaming in client.
.1.3.6.1.4.1.11.2.14.11.15.2.75.10.2.1.1.2,HPN-ICF-DOT11-ROAM-MIB::hpnicfDot11RoamInClientBSSID,OCTET,read-only,,current,,Represents BSSID of the AP to which the Roam-In client is associated.
.1.3.6.1.4.1.11.2.14.11.15.2.75.10.2.1.1.3,HPN-ICF-DOT11-ROAM-MIB::hpnicfDot11RoamInClientVlanID,Integer32,read-only,,current,,Represents the VLAN ID of Roam-In client.
.1.3.6.1.4.1.11.2.14.11.15.2.75.10.2.1.1.4,HPN-ICF-DOT11-ROAM-MIB::hpnicfDot11RoamInHomeACIPType,INTEGER,read-only,,current,unknown(0):ipv4(1):ipv6(2):ipv4z(3):ipv6z(4):dns(16),Represents the protocol type of home AC address.
.1.3.6.1.4.1.11.2.14.11.15.2.75.10.2.1.1.5,HPN-ICF-DOT11-ROAM-MIB::hpnicfDot11RoamInHomeACIPAddr,OCTET,read-only,,current,,Represents the address of home AC.
.1.3.6.1.4.1.11.2.14.11.15.2.75.10.2.2,HPN-ICF-DOT11-ROAM-MIB::hpnicfDot11RoamOutInfoTable,,not-accessible,,current,,The table can used to display the information of roaming out client.
.1.3.6.1.4.1.11.2.14.11.15.2.75.10.2.2.1,HPN-ICF-DOT11-ROAM-MIB::hpnicfDot11RoamOutInfoEntry,,not-accessible,hpnicfDot11RoamClientMAC,current,,This entry contains information of roaming out client.
.1.3.6.1.4.1.11.2.14.11.15.2.75.10.2.2.1.1,HPN-ICF-DOT11-ROAM-MIB::hpnicfDot11RoamOutClientBSSID,OCTET,read-only,,current,,Represents the BSSID of the AP to which the Roam-Out client is associated.
.1.3.6.1.4.1.11.2.14.11.15.2.75.10.2.2.1.2,HPN-ICF-DOT11-ROAM-MIB::hpnicfDot11RoamOutClientVlanID,Integer32,read-only,,current,,Represents the VLAN ID of Roam-Out client.
.1.3.6.1.4.1.11.2.14.11.15.2.75.10.2.2.1.3,HPN-ICF-DOT11-ROAM-MIB::hpnicfDot11RoamOutForeignACIPType,INTEGER,read-only,,current,unknown(0):ipv4(1):ipv6(2):ipv4z(3):ipv6z(4):dns(16),Represents the protocol type of foreign AC address.
.1.3.6.1.4.1.11.2.14.11.15.2.75.10.2.2.1.4,HPN-ICF-DOT11-ROAM-MIB::hpnicfDot11RoamOutForeignACIPAddr,OCTET,read-only,,current,,Represents the address of foreign AC.
.1.3.6.1.4.1.11.2.14.11.15.2.75.10.2.2.1.5,HPN-ICF-DOT11-ROAM-MIB::hpnicfDot11RoamOutClientUpTime,Integer32,read-only,,current,,Represents how long the Roam-Out client is associated with the foreign AC.
.1.3.6.1.4.1.11.2.14.11.15.2.75.10.2.3,HPN-ICF-DOT11-ROAM-MIB::hpnicfDot11RoamTrackTable,,not-accessible,,current,,The table contains the roam-track information of a specified client on the client's HA.
.1.3.6.1.4.1.11.2.14.11.15.2.75.10.2.3.1,HPN-ICF-DOT11-ROAM-MIB::hpnicfDot11RoamTrackEntry,,not-accessible,hpnicfDot11RoamTrackIndex,current,,This entry contains information of a specified client on the client's HA.
.1.3.6.1.4.1.11.2.14.11.15.2.75.10.2.3.1.1,HPN-ICF-DOT11-ROAM-MIB::hpnicfDot11RoamTrackIndex,Integer32,not-accessible,,current,,Represents the index of this entry.
.1.3.6.1.4.1.11.2.14.11.15.2.75.10.2.3.1.2,HPN-ICF-DOT11-ROAM-MIB::hpnicfDot11RoamTrackClientMAC,OCTET,read-only,,current,,Represents the MAC address of the roamed client.
.1.3.6.1.4.1.11.2.14.11.15.2.75.10.2.3.1.3,HPN-ICF-DOT11-ROAM-MIB::hpnicfDot11RoamTrackBSSID,OCTET,read-only,,current,,Represents the BSSID of the AP with which the client is associated.
.1.3.6.1.4.1.11.2.14.11.15.2.75.10.2.3.1.4,HPN-ICF-DOT11-ROAM-MIB::hpnicfDot11RoamTrackUpTime,Integer32,read-only,,current,,Represents how long the client is associated with the BSSID.
.1.3.6.1.4.1.11.2.14.11.15.2.75.10.2.3.1.5,HPN-ICF-DOT11-ROAM-MIB::hpnicfDot11RoamTrackACIPType,INTEGER,read-only,,current,unknown(0):ipv4(1):ipv6(2):ipv4z(3):ipv6z(4):dns(16),Represents the protocol type of the IP address of the access controller with which the client is connected.
.1.3.6.1.4.1.11.2.14.11.15.2.75.10.2.3.1.6,HPN-ICF-DOT11-ROAM-MIB::hpnicfDot11RoamTrackACIPAddr,OCTET,read-only,,current,,Represents the IP address of the access controller with which the client is connected.
.1.3.6.1.4.1.11.2.14.11.15.2.75.10.3,HPN-ICF-DOT11-ROAM-MIB::hpnicfDot11RoamStatisGroup,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.2.75.10.3.1,HPN-ICF-DOT11-ROAM-MIB::hpnicfDot11IntraACRoamingSuccCnt,Integer32,read-only,,current,,Represents the count of client successfully roam Intra-AC.
.1.3.6.1.4.1.11.2.14.11.15.2.75.10.3.2,HPN-ICF-DOT11-ROAM-MIB::hpnicfDot11InterACRoamingSuccCnt,Integer32,read-only,,current,,Represents the count of client successfully roam in Inter-AC.
.1.3.6.1.4.1.11.2.14.11.15.2.75.10.3.3,HPN-ICF-DOT11-ROAM-MIB::hpnicfDot11InterACRoamOutSuccCnt,Integer32,read-only,,current,,Represents the count of client successfully roam out Inter-AC.
.1.3.6.1.4.1.11.2.14.11.15.2.75.10.4,HPN-ICF-DOT11-ROAM-MIB::hpnicfDot11RoamStatis2Group,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.2.75.10.4.1,HPN-ICF-DOT11-ROAM-MIB::hpnicfDot11IntraACRoamingSuccCnt2,Counter32,read-only,,current,,Represents the count of client successfully roam Intra-AC in Counter32.
.1.3.6.1.4.1.11.2.14.11.15.2.75.10.4.2,HPN-ICF-DOT11-ROAM-MIB::hpnicfDot11InterACRoamingSuccCnt2,Counter32,read-only,,current,,Represents the count of client successfully roam in Inter-AC in Counter32.
.1.3.6.1.4.1.11.2.14.11.15.2.75.10.4.3,HPN-ICF-DOT11-ROAM-MIB::hpnicfDot11InterACRoamOutSuccCnt2,Counter32,read-only,,current,,Represents the count of client successfully roam out Inter-AC in Counter32.
.1.3.6.1.4.1.11.2.14.11.15.2.75.11,HPN-ICF-DOT11S-MESH-MIB::hpnicfDot11sMesh,,,,,,The file defines a MIB to provide MESH configuration information. GLOSSARY IEEE 802.11 Standard to encourage interoperability among wireless networking equipment. Access point (AP) Transmitter/receiver (transceiver) device that commonly connects and transports data between a wireless network and a wired network. Access control (AC) To control and manage multi-APs, it will bridge wireless and wired network. Fat AP Applied in the home, SOHO and so on, and it could work independently without help from AC. Fit AP Applied in the enterprise environment, it will work under the control and management from AC. BSS IEEE 802.11 Basic Service Set (Radio Cell). The BSS of an AP comprises of the stations directly associating with the AP. Radio The chip set to receive and send wireless signal. Mesh A network consisting of two or more mesh points which communicate with each other via mesh services. Mesh Point (MP) An IEEE 802.11 entity that contains an IEEE 802.11-conformant medium access control (MAC) and physical layer (PHY) interface to the wireless medium (WM) that supports mesh services. Mesh Access Point (MAP) A mesh point that is collocated with one or more access points. Mesh Portal Point (MPP) A mesh point that is collocated with one or more portals. Mesh Link A link between two MPs.
.1.3.6.1.4.1.11.2.14.11.15.2.75.11.1,HPN-ICF-DOT11S-MESH-MIB::hpnicfDot11sConfigGroup,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.2.75.11.1.1,HPN-ICF-DOT11S-MESH-MIB::hpnicfDot11sMeshGlobalPara,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.2.75.11.1.1.1,HPN-ICF-DOT11S-MESH-MIB::hpnicfDot11sMeshMkdID,OCTET,read-write,,current,,This object represents the mesh key distributor identifier (MKD-ID). If the MKD-ID is not configured, the value is '00:00:00:00:00:00'.
.1.3.6.1.4.1.11.2.14.11.15.2.75.11.1.2,HPN-ICF-DOT11S-MESH-MIB::hpnicfDot11sMeshPflTable,,not-accessible,,current,,This table is used to configure mesh profile. A mesh profile is created and mapped to a MP so that it can provide mesh services to other MPs which have the same mesh ID. When the mesh profile is enabled, all of the object in this table can not be modified except hpnicfDot11sMeshPflEnable. The mesh profile can not be deleted when it is bound with the radio.
.1.3.6.1.4.1.11.2.14.11.15.2.75.11.1.2.1,HPN-ICF-DOT11S-MESH-MIB::hpnicfDot11sMeshPflEntry,,not-accessible,hpnicfDot11sMeshPflIndex,current,,Each entry contains information of a mesh profile.
.1.3.6.1.4.1.11.2.14.11.15.2.75.11.1.2.1.1,HPN-ICF-DOT11S-MESH-MIB::hpnicfDot11sMeshPflIndex,Integer32,not-accessible,,current,,This object represents the index of the mesh profile.
.1.3.6.1.4.1.11.2.14.11.15.2.75.11.1.2.1.2,HPN-ICF-DOT11S-MESH-MIB::hpnicfDot11sMeshPflMeshID,OCTET,read-create,,current,,This object represents the mesh ID of the mesh profile. The string length of this object is zero when the mesh ID is not configured. If the mesh ID is not configured, hpnicfDot11sMeshPflEnable can not be set to 'true'.
.1.3.6.1.4.1.11.2.14.11.15.2.75.11.1.2.1.3,HPN-ICF-DOT11S-MESH-MIB::hpnicfDot11sMeshPflBindIntNum,Integer32,read-create,,current,,This object represents the specified mesh interface number binding to the mesh profile. If the value is set to -1, the binding will be removed. If the mesh interface is not specified, the value of hpnicfDot11sMeshPflEnable can not be set to 'true'.
.1.3.6.1.4.1.11.2.14.11.15.2.75.11.1.2.1.4,HPN-ICF-DOT11S-MESH-MIB::hpnicfDot11sMeshPflKeepAlive,Integer32,read-create,,current,,This object represents the mesh link keep-alive interval.
.1.3.6.1.4.1.11.2.14.11.15.2.75.11.1.2.1.5,HPN-ICF-DOT11S-MESH-MIB::hpnicfDot11sMeshPflBackhaulRate,Integer32,read-create,,current,,This object represents the link backhaul rate.
.1.3.6.1.4.1.11.2.14.11.15.2.75.11.1.2.1.6,HPN-ICF-DOT11S-MESH-MIB::hpnicfDot11sMeshMkdServEnable,INTEGER,read-create,,current,true(1):false(2),This object indicates whether the mesh key distributor (MKD) service for the mesh profile is enabled. 'true': The MKD service for the mesh profile is enabled. 'false': The MKD service for the mesh profile is disabled.
.1.3.6.1.4.1.11.2.14.11.15.2.75.11.1.2.1.7,HPN-ICF-DOT11S-MESH-MIB::hpnicfDot11sMeshPflEnable,INTEGER,read-create,,current,true(1):false(2),This object indicates whether the mesh profile is enabled. 'true': The mesh profile is enabled. 'false': The mesh profile is disabled.
.1.3.6.1.4.1.11.2.14.11.15.2.75.11.1.2.1.8,HPN-ICF-DOT11S-MESH-MIB::hpnicfDot11sMeshPflRowStatus,INTEGER,read-create,,current,active(1):notInService(2):notReady(3):createAndGo(4):createAndWait(5):destroy(6),The status of this table entry.
.1.3.6.1.4.1.11.2.14.11.15.2.75.11.1.3,HPN-ICF-DOT11S-MESH-MIB::hpnicfDot11sMpPlcyTable,,not-accessible,,current,,This table is used to configure MP policy. There is 'default_mp_plcy' on system by default and its index is 1. The 'default_mp_plcy' can not be deleted or modified. The MP policy can not be deleted when it is applied to a radio. It can not be modified when it is applied to an enabled radio.
.1.3.6.1.4.1.11.2.14.11.15.2.75.11.1.3.1,HPN-ICF-DOT11S-MESH-MIB::hpnicfDot11sMpPlcyEntry,,not-accessible,hpnicfDot11sMpPlcyIndex,current,,Each entry contains information of a MP policy.
.1.3.6.1.4.1.11.2.14.11.15.2.75.11.1.3.1.1,HPN-ICF-DOT11S-MESH-MIB::hpnicfDot11sMpPlcyIndex,Integer32,not-accessible,,current,,This object represents the MP policy index.
.1.3.6.1.4.1.11.2.14.11.15.2.75.11.1.3.1.2,HPN-ICF-DOT11S-MESH-MIB::hpnicfDot11sMpPlcyName,OCTET,read-create,,current,,This object represents the MP policy name. MP policy can not be created with name 'a', 'al', 'all' or 'default_mp_plcy'. Modification is not supported.
.1.3.6.1.4.1.11.2.14.11.15.2.75.11.1.3.1.3,HPN-ICF-DOT11S-MESH-MIB::hpnicfDot11sMpPlcyInitEnable,INTEGER,read-create,,current,true(1):false(2),This object indicates whether the link initiation for the MP policy is enabled. 'true': The link initiation for the MP policy is enabled. 'false': The link initiation for the MP policy is disabled.
.1.3.6.1.4.1.11.2.14.11.15.2.75.11.1.3.1.4,HPN-ICF-DOT11S-MESH-MIB::hpnicfDot11sMlspEnable,INTEGER,read-create,,current,true(1):false(2),This object indicates whether the mesh link switch protocol (MLSP) is enabled. 'true': MLSP is enabled. 'false': MLSP is disabled.
.1.3.6.1.4.1.11.2.14.11.15.2.75.11.1.3.1.5,HPN-ICF-DOT11S-MESH-MIB::hpnicfDot11sProbReqInterval,Integer32,read-create,,current,,This object represents the probe request interval.
.1.3.6.1.4.1.11.2.14.11.15.2.75.11.1.3.1.6,HPN-ICF-DOT11S-MESH-MIB::hpnicfDot11sRoleAuthEnable,INTEGER,read-create,,current,true(1):false(2),This object indicates whether the device can play as the role of an authenticator.
.1.3.6.1.4.1.11.2.14.11.15.2.75.11.1.3.1.7,HPN-ICF-DOT11S-MESH-MIB::hpnicfDot11sLinkHoldRSSI,Integer32,read-create,,current,,This object represents the link-hold receive signal strength indicator (RSSI).
.1.3.6.1.4.1.11.2.14.11.15.2.75.11.1.3.1.8,HPN-ICF-DOT11S-MESH-MIB::hpnicfDot11sLinkHoldTime,Integer32,read-create,,current,,This object represents the link-hold time.
.1.3.6.1.4.1.11.2.14.11.15.2.75.11.1.3.1.9,HPN-ICF-DOT11S-MESH-MIB::hpnicfDot11sSwitchMargin,Integer32,read-create,,current,,This object represents the link-switch margin.
.1.3.6.1.4.1.11.2.14.11.15.2.75.11.1.3.1.10,HPN-ICF-DOT11S-MESH-MIB::hpnicfDot11sLinkSaturationRSSI,Integer32,read-create,,current,,This object represents the link saturation receive signal strength indicator (RSSI).
.1.3.6.1.4.1.11.2.14.11.15.2.75.11.1.3.1.11,HPN-ICF-DOT11S-MESH-MIB::hpnicfDot11sLinkRateMode,INTEGER,read-create,,current,fixed(1):realtime(2),This object represents the rate mode of the mesh link.
.1.3.6.1.4.1.11.2.14.11.15.2.75.11.1.3.1.12,HPN-ICF-DOT11S-MESH-MIB::hpnicfDot11sMaxLinkNum,Integer32,read-create,,current,,This object represents the maximum number of the mesh link.
.1.3.6.1.4.1.11.2.14.11.15.2.75.11.1.3.1.13,HPN-ICF-DOT11S-MESH-MIB::hpnicfDot11sMpPlcyRowStatus,INTEGER,read-create,,current,active(1):notInService(2):notReady(3):createAndGo(4):createAndWait(5):destroy(6),The status of this table entry.
.1.3.6.1.4.1.11.2.14.11.15.2.75.11.1.4,HPN-ICF-DOT11S-MESH-MIB::hpnicfDot11sMlspCfgTable,,not-accessible,,current,,This table is used to configure MLSP proxy MAC address. Only if the specified MP policy is modifiable and the MLSP is enabled, the row of this table can be created and deleted. The row of this table can not be modified.
.1.3.6.1.4.1.11.2.14.11.15.2.75.11.1.4.1,HPN-ICF-DOT11S-MESH-MIB::hpnicfDot11sMlspCfgEntry,,not-accessible,hpnicfDot11sMpPlcyIndex:hpnicfDot11sMlspProxyIndex,current,,Each entry contains information of MLSP proxy MAC address.
.1.3.6.1.4.1.11.2.14.11.15.2.75.11.1.4.1.1,HPN-ICF-DOT11S-MESH-MIB::hpnicfDot11sMlspProxyIndex,Integer32,not-accessible,,current,,This object represents the MLSP proxy MAC address index.
.1.3.6.1.4.1.11.2.14.11.15.2.75.11.1.4.1.2,HPN-ICF-DOT11S-MESH-MIB::hpnicfDot11sMlspProxyMac,OCTET,read-create,,current,,This object represents the MLSP proxy MAC address.
.1.3.6.1.4.1.11.2.14.11.15.2.75.11.1.4.1.3,HPN-ICF-DOT11S-MESH-MIB::hpnicfDot11sMlspRowStatus,INTEGER,read-create,,current,active(1):notInService(2):notReady(3):createAndGo(4):createAndWait(5):destroy(6),The status of this table entry.
.1.3.6.1.4.1.11.2.14.11.15.2.75.11.1.5,HPN-ICF-DOT11S-MESH-MIB::hpnicfDot11sRadioCfgTable,,not-accessible,,current,,This table is used to configure mesh to the specified radio.
.1.3.6.1.4.1.11.2.14.11.15.2.75.11.1.5.1,HPN-ICF-DOT11S-MESH-MIB::hpnicfDot11sRadioCfgEntry,,not-accessible,hpnicfDot11sCfgRadioIndex,current,,Each entry contains mesh configure information of the specified radio.
.1.3.6.1.4.1.11.2.14.11.15.2.75.11.1.5.1.1,HPN-ICF-DOT11S-MESH-MIB::hpnicfDot11sCfgRadioIndex,Unsigned32,not-accessible,,current,,Represents index of the radio.
.1.3.6.1.4.1.11.2.14.11.15.2.75.11.1.5.1.2,HPN-ICF-DOT11S-MESH-MIB::hpnicfDot11sMeshPflMap,Integer32,read-write,,current,,This object represents the number of the mesh profile mapped to the specified radio. The value is zero when the radio is not binding mesh profile.
.1.3.6.1.4.1.11.2.14.11.15.2.75.11.1.5.1.3,HPN-ICF-DOT11S-MESH-MIB::hpnicfDot11sMpPlcyMap,Integer32,read-write,,current,,This object represents the index of the MP policy mapped to the specified radio. The MP policy is 'default_mp_plcy' when the radio is not binding user-defined MP policy. The index of 'default_mp_plcy' is 1. This object can not be modified when the radio is enabled.
.1.3.6.1.4.1.11.2.14.11.15.2.75.11.1.6,HPN-ICF-DOT11S-MESH-MIB::hpnicfDot11sAPCfgTable,,not-accessible,,current,,This table is used to configure mesh to the specified AP.
.1.3.6.1.4.1.11.2.14.11.15.2.75.11.1.6.1,HPN-ICF-DOT11S-MESH-MIB::hpnicfDot11sAPCfgEntry,,not-accessible,hpnicfDot11APElementIndex,current,,Each entry contains mesh configure information of the specified AP.
.1.3.6.1.4.1.11.2.14.11.15.2.75.11.1.6.1.1,HPN-ICF-DOT11S-MESH-MIB::hpnicfDot11sPortalEnable,INTEGER,read-write,,current,true(1):false(2),This object indicates whether the portal service is enabled. 'true': The portal service is enabled. 'false': The portal service is disabled.
.1.3.6.1.4.1.11.2.14.11.15.2.75.11.2,HPN-ICF-DOT11S-MESH-MIB::hpnicfDot11sWDSConfigGroup,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.2.75.11.2.1,HPN-ICF-DOT11S-MESH-MIB::hpnicfDot11sWDSPeerMacTable,,not-accessible,,current,,This table is used to configure wireless distribution system (WDS). The row of this table can not be modified.
.1.3.6.1.4.1.11.2.14.11.15.2.75.11.2.1.1,HPN-ICF-DOT11S-MESH-MIB::hpnicfDot11sWDSPeerMacEntry,,not-accessible,hpnicfDot11sCfgRadioIndex:hpnicfDot11sWDSPeerMacIndex,current,,Each entry contains information of WDS.
.1.3.6.1.4.1.11.2.14.11.15.2.75.11.2.1.1.1,HPN-ICF-DOT11S-MESH-MIB::hpnicfDot11sWDSPeerMacIndex,Integer32,not-accessible,,current,,This object represents the peer MAC address index.
.1.3.6.1.4.1.11.2.14.11.15.2.75.11.2.1.1.2,HPN-ICF-DOT11S-MESH-MIB::hpnicfDot11sWDSPeerMacAddrss,OCTET,read-create,,current,,This object represents the peer MAC address.
.1.3.6.1.4.1.11.2.14.11.15.2.75.11.2.1.1.3,HPN-ICF-DOT11S-MESH-MIB::hpnicfDot11sWDSPeerMacRowStatus,INTEGER,read-create,,current,active(1):notInService(2):notReady(3):createAndGo(4):createAndWait(5):destroy(6),The status of this table entry.
.1.3.6.1.4.1.11.2.14.11.15.2.75.11.3,HPN-ICF-DOT11S-MESH-MIB::hpnicfDot11sMeshStatusGroup,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.2.75.11.3.1,HPN-ICF-DOT11S-MESH-MIB::hpnicfDot11sMeshLinkStatusTable,,not-accessible,,current,,This table is used to represent the status of mesh link.
.1.3.6.1.4.1.11.2.14.11.15.2.75.11.3.1.1,HPN-ICF-DOT11S-MESH-MIB::hpnicfDot11sMeshLinkStatusEntry,,not-accessible,hpnicfDot11sMeshLinkIfIndex,current,,Each entry contains status information of mesh link.
.1.3.6.1.4.1.11.2.14.11.15.2.75.11.3.1.1.1,HPN-ICF-DOT11S-MESH-MIB::hpnicfDot11sMeshLinkIfIndex,Unsigned32,not-accessible,,current,,This object represents the interface index of the mesh link.
.1.3.6.1.4.1.11.2.14.11.15.2.75.11.3.1.1.2,HPN-ICF-DOT11S-MESH-MIB::hpnicfDot11sMeshLinkName,OCTET,read-only,,current,,This object represents the name of the mesh link.
.1.3.6.1.4.1.11.2.14.11.15.2.75.11.3.1.1.3,HPN-ICF-DOT11S-MESH-MIB::hpnicfDot11sMeshLinkBSSID,OCTET,read-only,,current,,This object represents the BSS ID of the mesh link.
.1.3.6.1.4.1.11.2.14.11.15.2.75.11.3.1.1.4,HPN-ICF-DOT11S-MESH-MIB::hpnicfDot11sMeshLinkPeerMac,OCTET,read-only,,current,,This object represents the peer MAC address of the mesh link.
.1.3.6.1.4.1.11.2.14.11.15.2.75.11.3.1.1.5,HPN-ICF-DOT11S-MESH-MIB::hpnicfDot11sMeshLinkExistDuration,Integer32,read-only,,current,,This object represents the time for which the link has been up.
.1.3.6.1.4.1.11.2.14.11.15.2.75.11.3.1.1.6,HPN-ICF-DOT11S-MESH-MIB::hpnicfDot11sMeshLinkType,INTEGER,read-only,,current,active(1):dormant(2),This object represents the type for the link.
.1.3.6.1.4.1.11.2.14.11.15.2.75.11.3.2,HPN-ICF-DOT11S-MESH-MIB::hpnicfDot11sMeshLinkStatisTable,,not-accessible,,current,,This table is used to represent the statistical information of mesh link.
.1.3.6.1.4.1.11.2.14.11.15.2.75.11.3.2.1,HPN-ICF-DOT11S-MESH-MIB::hpnicfDot11sMeshLinkStatisEntry,,not-accessible,hpnicfDot11APElementIndex:hpnicfDot11sMeshLinkStatIfIndex,current,,Each entry contains statistical information of mesh link.
.1.3.6.1.4.1.11.2.14.11.15.2.75.11.3.2.1.1,HPN-ICF-DOT11S-MESH-MIB::hpnicfDot11sMeshLinkStatIfIndex,Unsigned32,not-accessible,,current,,This object represents the interface index of the mesh link.
.1.3.6.1.4.1.11.2.14.11.15.2.75.11.3.2.1.2,HPN-ICF-DOT11S-MESH-MIB::hpnicfDot11sMeshLinkNbrIndex,Unsigned32,read-only,,current,,Represents the neighbor index of the mesh link.
.1.3.6.1.4.1.11.2.14.11.15.2.75.11.3.2.1.3,HPN-ICF-DOT11S-MESH-MIB::hpnicfDot11sMeshLinkRxTotByte,Counter32,read-only,,current,,Represents the amount of bytes that the mesh link received.
.1.3.6.1.4.1.11.2.14.11.15.2.75.11.3.2.1.4,HPN-ICF-DOT11S-MESH-MIB::hpnicfDot11sMeshLinkRxTotPkt,Counter32,read-only,,current,,Represents the amount of packets that the mesh link received.
.1.3.6.1.4.1.11.2.14.11.15.2.75.11.3.2.1.5,HPN-ICF-DOT11S-MESH-MIB::hpnicfDot11sMeshLinkRxUniPkt,Counter32,read-only,,current,,Represents the amount of unicast packets that the mesh link received.
.1.3.6.1.4.1.11.2.14.11.15.2.75.11.3.2.1.6,HPN-ICF-DOT11S-MESH-MIB::hpnicfDot11sMeshLinkRxBrocPkt,Counter32,read-only,,current,,Represents the amount of broadcast packets that the mesh link received.
.1.3.6.1.4.1.11.2.14.11.15.2.75.11.3.2.1.7,HPN-ICF-DOT11S-MESH-MIB::hpnicfDot11sMeshLinkRxMuticPkt,Counter32,read-only,,current,,Represents the amount of multicast packets that the mesh link received.
.1.3.6.1.4.1.11.2.14.11.15.2.75.11.3.2.1.8,HPN-ICF-DOT11S-MESH-MIB::hpnicfDot11sMeshLinkRxDiscPkt,Counter32,read-only,,current,,Represents the amount of packets that the mesh link discarded.
.1.3.6.1.4.1.11.2.14.11.15.2.75.11.3.2.1.9,HPN-ICF-DOT11S-MESH-MIB::hpnicfDot11sMeshLinkTxTotByte,Counter32,read-only,,current,,Represents the total amount of bytes that the mesh link transmitted.
.1.3.6.1.4.1.11.2.14.11.15.2.75.11.3.2.1.10,HPN-ICF-DOT11S-MESH-MIB::hpnicfDot11sMeshLinkTxTotPkt,Counter32,read-only,,current,,Represents the total amount of packets that the mesh link transmitted.
.1.3.6.1.4.1.11.2.14.11.15.2.75.11.3.2.1.11,HPN-ICF-DOT11S-MESH-MIB::hpnicfDot11sMeshLinkTxUniPkt,Counter32,read-only,,current,,Represents the amount of unicast packets that the mesh link transmitted.
.1.3.6.1.4.1.11.2.14.11.15.2.75.11.3.2.1.12,HPN-ICF-DOT11S-MESH-MIB::hpnicfDot11sMeshLinkTxBrocPkt,Counter32,read-only,,current,,Represents the amount of broadcast packets that the mesh link transmitted.
.1.3.6.1.4.1.11.2.14.11.15.2.75.11.3.2.1.13,HPN-ICF-DOT11S-MESH-MIB::hpnicfDot11sMeshLinkTxMuticPkt,Counter32,read-only,,current,,Represents the amount of multicast packets that the mesh link transmitted.
.1.3.6.1.4.1.11.2.14.11.15.2.75.11.3.2.1.14,HPN-ICF-DOT11S-MESH-MIB::hpnicfDot11sMeshLinkTxDiscPkt,Counter32,read-only,,current,,Represents the amount of discarded packets that the mesh link transmitted.
.1.3.6.1.4.1.11.2.14.11.15.2.75.11.3.2.1.15,HPN-ICF-DOT11S-MESH-MIB::hpnicfDot11sMeshLinkIFName,OCTET,read-only,,current,,Represents the name of mesh link interface.
.1.3.6.1.4.1.11.2.14.11.15.2.75.11.3.3,HPN-ICF-DOT11S-MESH-MIB::hpnicfDot11sMeshNbrStatusTable,,not-accessible,,current,,This table represents the status information for the neighbors of MP.
.1.3.6.1.4.1.11.2.14.11.15.2.75.11.3.3.1,HPN-ICF-DOT11S-MESH-MIB::hpnicfDot11sMeshNbrStatusEntry,,not-accessible,hpnicfDot11APElementIndex:hpnicfDot11sMeshNbrIndex,current,,Each entry of the table will provide status information for the neighbors of MP.
.1.3.6.1.4.1.11.2.14.11.15.2.75.11.3.3.1.1,HPN-ICF-DOT11S-MESH-MIB::hpnicfDot11sMeshNbrIndex,Unsigned32,not-accessible,,current,,Represents the index for the neighbor.
.1.3.6.1.4.1.11.2.14.11.15.2.75.11.3.3.1.2,HPN-ICF-DOT11S-MESH-MIB::hpnicfDot11sMeshNbrRadioID,Unsigned32,read-only,,current,,Represents the radio ID of the neighbor.
.1.3.6.1.4.1.11.2.14.11.15.2.75.11.3.3.1.3,HPN-ICF-DOT11S-MESH-MIB::hpnicfDot11sMeshLocalMeshID,OCTET,read-only,,current,,Represents the local mesh ID.
.1.3.6.1.4.1.11.2.14.11.15.2.75.11.3.3.1.4,HPN-ICF-DOT11S-MESH-MIB::hpnicfDot11sMeshNbrMeshID,OCTET,read-only,,current,,Represents the mesh ID of the neighbor.
.1.3.6.1.4.1.11.2.14.11.15.2.75.11.3.3.1.5,HPN-ICF-DOT11S-MESH-MIB::hpnicfDot11sMeshNbrBSSID,OCTET,read-only,,current,,Represents the BSS ID of the neighbor.
.1.3.6.1.4.1.11.2.14.11.15.2.75.11.3.3.1.6,HPN-ICF-DOT11S-MESH-MIB::hpnicfDot11sMeshNbrPeerMac,OCTET,read-only,,current,,Represents the MAC address of the peer neighbor.
.1.3.6.1.4.1.11.2.14.11.15.2.75.11.3.3.1.7,HPN-ICF-DOT11S-MESH-MIB::hpnicfDot11sMeshLinkInMp,Unsigned32,read-only,,current,,Represents the interface index of mesh link that used to connect with this neighbor.
.1.3.6.1.4.1.11.2.14.11.15.2.75.11.3.3.1.8,HPN-ICF-DOT11S-MESH-MIB::hpnicfDot11sMeshMPLinkStatus,INTEGER,read-only,,current,processing(1):up(2):down(3),Represents the status of mesh link that used to connect with this neighbor.
.1.3.6.1.4.1.11.2.14.11.15.2.75.11.3.3.1.9,HPN-ICF-DOT11S-MESH-MIB::hpnicfDot11sMeshNbrChannel,Unsigned32,read-only,,current,,Represents the channel number used by this neighbor.
.1.3.6.1.4.1.11.2.14.11.15.2.75.11.3.3.1.10,HPN-ICF-DOT11S-MESH-MIB::hpnicfDot11sMeshNbrLinkDuration,Integer32,read-only,,current,,Represents the duration of mesh link that used to connect with this neighbor.
.1.3.6.1.4.1.11.2.14.11.15.2.75.11.3.3.1.11,HPN-ICF-DOT11S-MESH-MIB::hpnicfDot11sMeshNbrRSSI,Integer32,read-only,,current,,Represents the RSSI of mesh link that used to connect with this neighbor.
.1.3.6.1.4.1.11.2.14.11.15.2.75.11.3.3.1.12,HPN-ICF-DOT11S-MESH-MIB::hpnicfDot11sMeshNbrSNR,Integer32,read-only,,current,,Represents the SNR of mesh link that used to connect with this neighbor.
.1.3.6.1.4.1.11.2.14.11.15.2.75.12,HPN-ICF-DOT11-REF-MIB::hpnicfDot11Common,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.2.75.12.1,HPN-ICF-DOT11-REF-MIB::hpnicfDot11ElementGroup,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.2.75.12.1.1,HPN-ICF-DOT11-REF-MIB::hpnicfDot11APElementTable,,not-accessible,,current,,This table is used to represent fat AP and AP template on AC as one kind of AP element.
.1.3.6.1.4.1.11.2.14.11.15.2.75.12.1.1.1,HPN-ICF-DOT11-REF-MIB::hpnicfDot11APElementEntry,,not-accessible,hpnicfDot11APElementIndex,current,,Each entry contains information for each AP element.
.1.3.6.1.4.1.11.2.14.11.15.2.75.12.1.1.1.1,HPN-ICF-DOT11-REF-MIB::hpnicfDot11APElementIndex,Integer32,not-accessible,,current,,This object represents the index of AP element.
.1.3.6.1.4.1.11.2.14.11.15.2.75.12.1.1.1.2,HPN-ICF-DOT11-REF-MIB::hpnicfDot11APElementTemplateName,OCTET,read-only,,current,,This object represents the template name of AP element.
.1.3.6.1.4.1.11.2.14.11.15.2.75.12.1.1.1.3,HPN-ICF-DOT11-REF-MIB::hpnicfDot11APElementSerialID,OCTET,read-only,,current,,This object represents the serial ID of AP element.
.1.3.6.1.4.1.11.2.14.11.15.2.75.12.1.1.1.4,HPN-ICF-DOT11-REF-MIB::hpnicfDot11APElementModelAlias,OCTET,read-only,,current,,This object represents the alias of AP element model name.
.1.3.6.1.4.1.11.2.14.11.15.2.75.12.1.2,HPN-ICF-DOT11-REF-MIB::hpnicfDot11RadioElementTable,,not-accessible,,current,,This table is used to represent the radio element of fat AP and AC.
.1.3.6.1.4.1.11.2.14.11.15.2.75.12.1.2.1,HPN-ICF-DOT11-REF-MIB::hpnicfDot11RadioElementEntry,,not-accessible,hpnicfDot11APElementIndex:hpnicfDot11RadioElementRadioNum,current,,Each entry contains information for each radio element.
.1.3.6.1.4.1.11.2.14.11.15.2.75.12.1.2.1.1,HPN-ICF-DOT11-REF-MIB::hpnicfDot11RadioElementRadioNum,Unsigned32,not-accessible,,current,,This object represents the number of the radio element.
.1.3.6.1.4.1.11.2.14.11.15.2.75.12.1.2.1.2,HPN-ICF-DOT11-REF-MIB::hpnicfDot11RadioElementRadioPolicy,OCTET,read-write,,current,,This object represents the radio policy of the radio element.
.1.3.6.1.4.1.11.2.14.11.15.2.75.12.1.2.1.3,HPN-ICF-DOT11-REF-MIB::hpnicfDot11RadioElementRadioIndex,Unsigned32,read-only,,current,,This object represents the index of the radio element. On AC, the higher 24 bits stand for the AP index, and the last 8 bits stand for the radio index. On fat AP, the index stands for the interface index of radio interface.
.1.3.6.1.4.1.11.2.14.11.15.2.75.13,HPN-ICF-DOT11-SA-MIB::hpnicfDot11Sa,,,,,,This MIB module provides spectrum analysis information. The initial revision of this MIB module. The spectrum analysis module on APs is able to examine the radio frequency (RF) environment in which the Wi-Fi network is operating, identify interference and classify its sources. An analysis of the results can then be used to quickly isolate issues with packet transmission, channel quality, and traffic congestion caused by contention with other devices operating in the same band or channel.
.1.3.6.1.4.1.11.2.14.11.15.2.75.13.1,HPN-ICF-DOT11-SA-MIB::hpnicfDot11SaCfgGroup,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.2.75.13.1.1,HPN-ICF-DOT11-SA-MIB::hpnicfDot11SaCfgTable,,not-accessible,,current,,This table is used to configure spectrum analysis.
.1.3.6.1.4.1.11.2.14.11.15.2.75.13.1.1.1,HPN-ICF-DOT11-SA-MIB::hpnicfDot11SaCfgEntry,,not-accessible,hpnicfDot11SaCfgRadioType,current,,This entry contains the spectrum analysis configuration.
.1.3.6.1.4.1.11.2.14.11.15.2.75.13.1.1.1.1,HPN-ICF-DOT11-SA-MIB::hpnicfDot11SaCfgRadioType,INTEGER,not-accessible,,current,dot11bg(1):dot11a(2),Represents the radio type of the configuration.
.1.3.6.1.4.1.11.2.14.11.15.2.75.13.1.1.1.2,HPN-ICF-DOT11-SA-MIB::hpnicfDot11SaEnable,INTEGER,read-write,,current,true(1):false(2),Represents whether spectrum analysis is enabled globally.
.1.3.6.1.4.1.11.2.14.11.15.2.75.13.1.1.1.3,HPN-ICF-DOT11-SA-MIB::hpnicfDot11SaRptDevType,BITS,read-write,,current,microwave(0):microwaveInverter(1):bluetooth(2):fixedFreqOthers(3):fixedFreqCordlessPhone(4):fixedFreqVideo(5):fixedFreqAudio(6):freqHopperOthers(7):freqHopperCordlessBase(8):freqHopperCordlessNetwork(9):freqHopperXbox(10):genericInterferer(11),Represents which types of interference devices should be reported.
.1.3.6.1.4.1.11.2.14.11.15.2.75.13.1.1.1.4,HPN-ICF-DOT11-SA-MIB::hpnicfDot11SaTrapDevEnable,INTEGER,read-write,,current,true(1):false(2),Represents whether the interference device trap is enabled.
.1.3.6.1.4.1.11.2.14.11.15.2.75.13.1.1.1.5,HPN-ICF-DOT11-SA-MIB::hpnicfDot11SaTrapDevType,BITS,read-write,,current,microwave(0):microwaveInverter(1):bluetooth(2):fixedFreqOthers(3):fixedFreqCordlessPhone(4):fixedFreqVideo(5):fixedFreqAudio(6):freqHopperOthers(7):freqHopperCordlessBase(8):freqHopperCordlessNetwork(9):freqHopperXbox(10):genericInterferer(11),Represents which types of interference device will send traps when the interference device trap is enabled.
.1.3.6.1.4.1.11.2.14.11.15.2.75.13.1.1.1.6,HPN-ICF-DOT11-SA-MIB::hpnicfDot11SaTrapAQEnable,INTEGER,read-write,,current,true(1):false(2),Represents whether the air quality trap is enabled.
.1.3.6.1.4.1.11.2.14.11.15.2.75.13.1.1.1.7,HPN-ICF-DOT11-SA-MIB::hpnicfDot11SaTrapAQThreshold,Integer32,read-write,,current,,Represents the air quality trap threshold. When the air quality is below this value, the air quality trap will be sent.
.1.3.6.1.4.1.11.2.14.11.15.2.75.13.1.1.1.8,HPN-ICF-DOT11-SA-MIB::hpnicfDot11SaDrivenRRMEnable,INTEGER,read-write,,current,true(1):false(2),Configure whether to trigger RRM to run when an access point detects a certain level of interference.
.1.3.6.1.4.1.11.2.14.11.15.2.75.13.1.1.1.9,HPN-ICF-DOT11-SA-MIB::hpnicfDot11SaDrivenRRMSnt,INTEGER,read-write,,current,low(1):medium(2):high(3),Configure the threshold at which RRM will be triggered. When the interference level for the access point rises above the threshold level, RRM initiates a local dynamic channel assignment (DCA) run and changes the channel of the affected access point radio if possible to improve network performance. Low represents a decreased sensitivity to changes in the environment while high represents an increased sensitivity.
.1.3.6.1.4.1.11.2.14.11.15.2.75.13.2,HPN-ICF-DOT11-SA-MIB::hpnicfDot11SaStatusGroup,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.2.75.13.2.1,HPN-ICF-DOT11-SA-MIB::hpnicfDot11SaRtFFTDataTable,,not-accessible,,current,,This table contains the real-time FFT data for spectrum analysis.
.1.3.6.1.4.1.11.2.14.11.15.2.75.13.2.1.1,HPN-ICF-DOT11-SA-MIB::hpnicfDot11SaRtFFTDataEntry,,not-accessible,hpnicfDot11SaAPID:hpnicfDot11SaRadioID:hpnicfDot11SaRtDataGroupID:hpnicfDot11SaFrequency,current,,This entry contains the real-time FFT data for spectrum analysis.
.1.3.6.1.4.1.11.2.14.11.15.2.75.13.2.1.1.1,HPN-ICF-DOT11-SA-MIB::hpnicfDot11SaAPID,OCTET,not-accessible,,current,,Represents the serial ID of the AP.
.1.3.6.1.4.1.11.2.14.11.15.2.75.13.2.1.1.2,HPN-ICF-DOT11-SA-MIB::hpnicfDot11SaRadioID,Integer32,not-accessible,,current,,Represents the ID of the radio.
.1.3.6.1.4.1.11.2.14.11.15.2.75.13.2.1.1.3,HPN-ICF-DOT11-SA-MIB::hpnicfDot11SaRtDataGroupID,Integer32,not-accessible,,current,,Represents group ID of the collected data. Maybe the device collects multiple groups of data at the collected interval.
.1.3.6.1.4.1.11.2.14.11.15.2.75.13.2.1.1.4,HPN-ICF-DOT11-SA-MIB::hpnicfDot11SaFrequency,Integer32,not-accessible,,current,,Represents the frequency number in 100 Hz.
.1.3.6.1.4.1.11.2.14.11.15.2.75.13.2.1.1.5,HPN-ICF-DOT11-SA-MIB::hpnicfDot11SaRtFreqPower,Integer32,read-only,,current,,Represents the power of the frequency point.
.1.3.6.1.4.1.11.2.14.11.15.2.75.13.2.1.1.6,HPN-ICF-DOT11-SA-MIB::hpnicfDot11SaRtFreqMaxPower,Integer32,read-only,,current,,Represents the max power of the frequency point.
.1.3.6.1.4.1.11.2.14.11.15.2.75.13.2.1.1.7,HPN-ICF-DOT11-SA-MIB::hpnicfDot11SaRtFreqDutyCycle,Integer32,read-only,,current,,Represents the duty cycle of the frequency point.
.1.3.6.1.4.1.11.2.14.11.15.2.75.13.2.1.1.8,HPN-ICF-DOT11-SA-MIB::hpnicfDot11SaRtFreqDataSeqNo,Unsigned32,read-only,,current,,Represents the sequence number of the data.
.1.3.6.1.4.1.11.2.14.11.15.2.75.13.2.2,HPN-ICF-DOT11-SA-MIB::hpnicfDot11SaIntfDevTable,,not-accessible,,current,,This table contains the information of the interfering devices.
.1.3.6.1.4.1.11.2.14.11.15.2.75.13.2.2.1,HPN-ICF-DOT11-SA-MIB::hpnicfDot11SaIntfDevEntry,,not-accessible,hpnicfDot11SaAPID:hpnicfDot11SaRadioID:hpnicfDot11SaDevID,current,,This entry contains the information of the interfering devices.
.1.3.6.1.4.1.11.2.14.11.15.2.75.13.2.2.1.1,HPN-ICF-DOT11-SA-MIB::hpnicfDot11SaDevID,Integer32,not-accessible,,current,,Represents the device identification number that uniquely identified the interfering device.
.1.3.6.1.4.1.11.2.14.11.15.2.75.13.2.2.1.2,HPN-ICF-DOT11-SA-MIB::hpnicfDot11SaDevType,INTEGER,read-only,,current,microwave(1):microwaveInverter(2):bluetooth(3):fixedFreqOthers(4):fixedFreqCordlessPhone(5):fixedFreqVideo(6):fixedFreqAudio(7):freqHopperOthers(8):freqHopperCordlessBase(9):freqHopperCordlessNetwork(10):freqHopperXbox(11):genericInterferer(12),Represents type of the interferer.
.1.3.6.1.4.1.11.2.14.11.15.2.75.13.2.2.1.3,HPN-ICF-DOT11-SA-MIB::hpnicfDot11SaDevSI,Integer32,read-only,,current,,Represents severity index of the interfering device. Severity index is calculated, a positive integer between 0 and 100(with 100 being the most severe).
.1.3.6.1.4.1.11.2.14.11.15.2.75.13.2.2.1.4,HPN-ICF-DOT11-SA-MIB::hpnicfDot11SaDevRSSI,Integer32,read-only,,current,,Represents receive signal strength indicator (RSSI) of interfering device.
.1.3.6.1.4.1.11.2.14.11.15.2.75.13.2.2.1.5,HPN-ICF-DOT11-SA-MIB::hpnicfDot11SaDevDutyCycle,Integer32,read-only,,current,,Represents proportion of time in percentage during which the interfering device was active.
.1.3.6.1.4.1.11.2.14.11.15.2.75.13.2.2.1.6,HPN-ICF-DOT11-SA-MIB::hpnicfDot11SaDevAffectedChls,OCTET,read-only,,current,,Represents channels that the interfering device affects.
.1.3.6.1.4.1.11.2.14.11.15.2.75.13.2.2.1.7,HPN-ICF-DOT11-SA-MIB::hpnicfDot11SaDevDetectedTime,OCTET,read-only,,current,,Represents time at which the interference was detected.
.1.3.6.1.4.1.11.2.14.11.15.2.75.13.2.3,HPN-ICF-DOT11-SA-MIB::hpnicfDot11SaAirQualityTable,,not-accessible,,current,,This table contains the air quality of the channels.
.1.3.6.1.4.1.11.2.14.11.15.2.75.13.2.3.1,HPN-ICF-DOT11-SA-MIB::hpnicfDot11SaAirQualityEntry,,not-accessible,hpnicfDot11SaAPID:hpnicfDot11SaRadioID:hpnicfDot11SaChlNum,current,,This entry contains the air quality of the channels.
.1.3.6.1.4.1.11.2.14.11.15.2.75.13.2.3.1.1,HPN-ICF-DOT11-SA-MIB::hpnicfDot11SaChlNum,Integer32,not-accessible,,current,,Represents the radio channel where the air quality is monitored.
.1.3.6.1.4.1.11.2.14.11.15.2.75.13.2.3.1.2,HPN-ICF-DOT11-SA-MIB::hpnicfDot11SaAvgQuality,Integer32,read-only,,current,,Represents the average air quality for this radio channel.
.1.3.6.1.4.1.11.2.14.11.15.2.75.13.2.3.1.3,HPN-ICF-DOT11-SA-MIB::hpnicfDot11SaMinQuality,Integer32,read-only,,current,,Represents the minimum air quality for this radio channel.
.1.3.6.1.4.1.11.2.14.11.15.2.75.13.2.3.1.4,HPN-ICF-DOT11-SA-MIB::hpnicfDot11SaIntfDevNum,Integer32,read-only,,current,,Represents the number of interferers detected by the radios on the 802.11a/n or 802.11b/g/n radio band.
.1.3.6.1.4.1.11.2.14.11.15.2.75.13.2.3.1.5,HPN-ICF-DOT11-SA-MIB::hpnicfDot11SaWiFiUtil,Integer32,read-only,,current,,Represents the percentage of the channel currently being used by Wi-Fi devices.
.1.3.6.1.4.1.11.2.14.11.15.2.75.13.2.3.1.6,HPN-ICF-DOT11-SA-MIB::hpnicfDot11SaNonWiFiUtil,Integer32,read-only,,current,,Represents the percentage of the channel currently being used by non-Wi-Fi interference.
.1.3.6.1.4.1.11.2.14.11.15.2.75.13.2.3.1.7,HPN-ICF-DOT11-SA-MIB::hpnicfDot11SaNoiseFloor,Integer32,read-only,,current,,Represents current noise floor recorded on the channel.
.1.3.6.1.4.1.11.2.14.11.15.2.75.13.3,HPN-ICF-DOT11-SA-MIB::hpnicfDot11SaNotifyGroup,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.2.75.13.3.0,HPN-ICF-DOT11-SA-MIB::hpnicfDot11SaTraps,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.2.75.13.3.0.1,HPN-ICF-DOT11-SA-MIB::hpnicfDot11SaIntfDevDetected,,,,,,Interfering device is detected.
.1.3.6.1.4.1.11.2.14.11.15.2.75.13.3.0.2,HPN-ICF-DOT11-SA-MIB::hpnicfDot11SaIntfDevDisappear,,,,,,Interfering device disappeared.
.1.3.6.1.4.1.11.2.14.11.15.2.75.13.3.0.3,HPN-ICF-DOT11-SA-MIB::hpnicfDot11SaChlQltLow,,,,,,The quality of the channel is below the specified threshold.
.1.3.6.1.4.1.11.2.14.11.15.2.75.13.3.0.4,HPN-ICF-DOT11-SA-MIB::hpnicfDot11SaChlQltRecover,,,,,,The quality of the channel recovered from low status.
.1.3.6.1.4.1.11.2.14.11.15.2.75.13.3.1,HPN-ICF-DOT11-SA-MIB::hpnicfDot11SaTrapVars,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.2.75.13.3.1.1,HPN-ICF-DOT11-SA-MIB::hpnicfDot11SaTrapAPID,OCTET,accessible-for-notify,,current,,Represents the identifier of the AP.
.1.3.6.1.4.1.11.2.14.11.15.2.75.13.3.1.2,HPN-ICF-DOT11-SA-MIB::hpnicfDot11SaTrapRadioID,Integer32,accessible-for-notify,,current,,Represents the identifier of the radio.
.1.3.6.1.4.1.11.2.14.11.15.2.75.13.3.1.3,HPN-ICF-DOT11-SA-MIB::hpnicfDot11SaTrapDevID,Integer32,accessible-for-notify,,current,,Represents the device identification number that uniquely identified the interfering device.
.1.3.6.1.4.1.11.2.14.11.15.2.75.13.3.1.4,HPN-ICF-DOT11-SA-MIB::hpnicfDot11SaTrapIntfDevType,INTEGER,accessible-for-notify,,current,microwave(1):microwaveInverter(2):bluetooth(3):fixedFreqOthers(4):fixedFreqCordlessPhone(5):fixedFreqVideo(6):fixedFreqAudio(7):freqHopperOthers(8):freqHopperCordlessBase(9):freqHopperCordlessNetwork(10):freqHopperXbox(11):genericInterferer(12),Represents type of the interferer.
.1.3.6.1.4.1.11.2.14.11.15.2.75.13.3.1.5,HPN-ICF-DOT11-SA-MIB::hpnicfDot11APTrapDevSI,Integer32,accessible-for-notify,,current,,Represents severity index of the interfering device. Severity index is calculated, a positive integer between 0 and 100(with 100 being the most severe).
.1.3.6.1.4.1.11.2.14.11.15.2.75.13.3.1.6,HPN-ICF-DOT11-SA-MIB::hpnicfDot11SaTrapDevRSSI,Integer32,accessible-for-notify,,current,,Represents receive signal strength indicator (RSSI) of interfering device.
.1.3.6.1.4.1.11.2.14.11.15.2.75.13.3.1.7,HPN-ICF-DOT11-SA-MIB::hpnicfDot11APTrapDevDC,Integer32,accessible-for-notify,,current,,Represents proportion of time in percentage during which the interfering device was active.
.1.3.6.1.4.1.11.2.14.11.15.2.75.13.3.1.8,HPN-ICF-DOT11-SA-MIB::hpnicfDot11APTrapDevChls,OCTET,accessible-for-notify,,current,,Represents channels that the interfering device affects.
.1.3.6.1.4.1.11.2.14.11.15.2.75.13.3.1.9,HPN-ICF-DOT11-SA-MIB::hpnicfDot11APTrapDevDctTime,OCTET,accessible-for-notify,,current,,Represents time at which the interference was detected.
.1.3.6.1.4.1.11.2.14.11.15.2.75.13.3.1.10,HPN-ICF-DOT11-SA-MIB::hpnicfDot11SaTrapChlNum,Integer32,accessible-for-notify,,current,,Represents the radio channel where the air quality is monitored.
.1.3.6.1.4.1.11.2.14.11.15.2.75.13.3.1.11,HPN-ICF-DOT11-SA-MIB::hpnicfDot11SaTrapChlQlt,Integer32,accessible-for-notify,,current,,Represents the quality for this radio channel.
.1.3.6.1.4.1.11.2.14.11.15.2.75.13.3.1.12,HPN-ICF-DOT11-SA-MIB::hpnicfDot11SaTrapChlIntfNum,Integer32,accessible-for-notify,,current,,Represents the number of interferers detected by the radios on the 802.11a/n or 802.11b/g/n radio band.
.1.3.6.1.4.1.11.2.14.11.15.2.75.14,HPN-ICF-DOT11-LIC-MIB::hpnicfDot11LIC,,,,,,This MIB provides information for WLAN license configuration in AC. GLOSSARY IEEE 802.11 Standard to encourage interoperability among wireless networking equipment. Access point (AP) Transmitter/receiver (transceiver) device that commonly connects and transports data between a wireless network and a wired network. Access control (AC) To control and manage multi-APs, it will bridge wireless and wired network. Fit AP Applied in the enterprise environment, it will work under the control and management from AC. Control And Provisioning of Wireless Access Points Protocol The short name of protocol is CAPWAP. AC will control and manage AP by CAPWAP tunnel protocol defined by IETF. Also, a data tunnel will be set up between AC and AP. Basic Service Set The IEEE 802.11 BSS of an AP comprises of the stations directly associating with the AP. It will be identified by BSSID.
.1.3.6.1.4.1.11.2.14.11.15.2.75.14.1,HPN-ICF-DOT11-LIC-MIB::hpnicfDot11LICConfigGroup,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.2.75.14.1.1,HPN-ICF-DOT11-LIC-MIB::hpnicfDot11LICSerialNumber,OCTET,read-only,,current,,The device serial number.
.1.3.6.1.4.1.11.2.14.11.15.2.75.14.1.2,HPN-ICF-DOT11-LIC-MIB::hpnicfDot11LicApNumGroupSupport,INTEGER,read-only,,current,true(1):false(2),Represents support hpnicfDot11LicApNumGroup 'ture': device spport hpnicfDot11LicApNumGroup. 'false': device not spport hpnicfDot11LicApNumGroupp.
.1.3.6.1.4.1.11.2.14.11.15.2.75.14.2,HPN-ICF-DOT11-LIC-MIB::hpnicfDot11LICApNumGroup,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.2.75.14.2.1,HPN-ICF-DOT11-LIC-MIB::hpnicfDot11LICApNumAttrTable,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.2.75.14.2.1.1,HPN-ICF-DOT11-LIC-MIB::hpnicfDot11LICDefautAPNumPermit,Integer32,read-only,,current,,Represents the number of AP connection permitted for one AC without license.
.1.3.6.1.4.1.11.2.14.11.15.2.75.14.2.1.2,HPN-ICF-DOT11-LIC-MIB::hpnicfDot11LICCurrentAPNumPermit,Integer32,read-only,,current,,Represents the total number of AP connection permitted for one AC, include default number and the licenses that installed.
.1.3.6.1.4.1.11.2.14.11.15.2.75.14.2.1.3,HPN-ICF-DOT11-LIC-MIB::hpnicfDot11LICMaxAPNumPermit,Integer32,read-only,,current,,Represents the maximum number of AP to support connection permitted for one AC, include default number and full licenses.
.1.3.6.1.4.1.11.2.14.11.15.2.75.14.2.2,HPN-ICF-DOT11-LIC-MIB::hpnicfDot11LICApNumLicTable,,not-accessible,,current,,Each entry contains license information of ap number.
.1.3.6.1.4.1.11.2.14.11.15.2.75.14.2.2.1,HPN-ICF-DOT11-LIC-MIB::hpnicfDot11LICApNumLicEntry,,not-accessible,hpnicfDot11LICLicenseKeyIndex,current,,Each entry contains association information of each station.
.1.3.6.1.4.1.11.2.14.11.15.2.75.14.2.2.1.1,HPN-ICF-DOT11-LIC-MIB::hpnicfDot11LICLicenseKeyIndex,Integer32,read-only,,current,,Licensed key index value.
.1.3.6.1.4.1.11.2.14.11.15.2.75.14.2.2.1.2,HPN-ICF-DOT11-LIC-MIB::hpnicfDot11LICLicenseKey,OCTET,read-only,,current,,Specifies a certain license key.
.1.3.6.1.4.1.11.2.14.11.15.2.75.14.2.2.1.3,HPN-ICF-DOT11-LIC-MIB::hpnicfDot11LICActivationKey,OCTET,read-only,,current,,Specifies a certain activation key.
.1.3.6.1.4.1.11.2.14.11.15.2.75.14.2.2.1.4,HPN-ICF-DOT11-LIC-MIB::hpnicfDot11LICApNum,Integer32,read-only,,current,,Represents support connect ap number of the license.
.1.3.6.1.4.1.11.2.14.11.15.2.75.14.3,HPN-ICF-DOT11-LIC-MIB::hpnicfDot11LICFeatureGroup,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.2.75.14.3.1,HPN-ICF-DOT11-LIC-MIB::hpnicfDot11LICFeatureAttrTable,,not-accessible,,current,,Each entry contains attribute information of wlan feature.
.1.3.6.1.4.1.11.2.14.11.15.2.75.14.3.1.1,HPN-ICF-DOT11-LIC-MIB::hpnicfDot11LICFeatureAttrEntry,,not-accessible,hpnicfDot11LICAttrIndex,current,,Each entry contains feature attribute information of licensetypename.
.1.3.6.1.4.1.11.2.14.11.15.2.75.14.3.1.1.1,HPN-ICF-DOT11-LIC-MIB::hpnicfDot11LICAttrIndex,Integer32,read-only,,current,,Attribute index value.
.1.3.6.1.4.1.11.2.14.11.15.2.75.14.3.1.1.2,HPN-ICF-DOT11-LIC-MIB::hpnicfDot11LICAttrTypeName,OCTET,read-only,,current,,Represents attribute type name
.1.3.6.1.4.1.11.2.14.11.15.2.75.14.3.1.1.3,HPN-ICF-DOT11-LIC-MIB::hpnicfDot11LICAttrDefVal,Integer32,read-only,,current,,Represents the default value of the license type.
.1.3.6.1.4.1.11.2.14.11.15.2.75.14.3.1.1.4,HPN-ICF-DOT11-LIC-MIB::hpnicfDot11LICAttrMaxVal,Integer32,read-only,,current,,Represents the maximum value of the license type.
.1.3.6.1.4.1.11.2.14.11.15.2.75.14.3.2,HPN-ICF-DOT11-LIC-MIB::hpnicfDot11LICFeatureLicTable,,not-accessible,,current,,Each entry contains license information of wlan feature.
.1.3.6.1.4.1.11.2.14.11.15.2.75.14.3.2.1,HPN-ICF-DOT11-LIC-MIB::hpnicfDot11LICFeatureLicEntry,,not-accessible,hpnicfDot11LICKeyIndex,current,,Each entry contains wlan feature information of license.
.1.3.6.1.4.1.11.2.14.11.15.2.75.14.3.2.1.1,HPN-ICF-DOT11-LIC-MIB::hpnicfDot11LICKeyIndex,Integer32,read-only,,current,,Licensed key index value.
.1.3.6.1.4.1.11.2.14.11.15.2.75.14.3.2.1.2,HPN-ICF-DOT11-LIC-MIB::hpnicfDot11LICTypeName,OCTET,read-only,,current,,Represents the type name of the license entry.
.1.3.6.1.4.1.11.2.14.11.15.2.75.14.3.2.1.3,HPN-ICF-DOT11-LIC-MIB::hpnicfDot11LICKey,OCTET,read-only,,current,,Specifies a certain license key.
.1.3.6.1.4.1.11.2.14.11.15.2.75.14.3.2.1.4,HPN-ICF-DOT11-LIC-MIB::hpnicfDot11LICTimeLimit,Integer32,read-only,,current,,Represents available time left of the license entry.
.1.3.6.1.4.1.11.2.14.11.15.2.75.14.3.2.1.5,HPN-ICF-DOT11-LIC-MIB::hpnicfDot11LICValue,Integer32,read-only,,current,,Represents the value of the license entry. If hpnicfDot11LICFeatureTypeName is 'AP', this meaning of ap number, and so no.
.1.3.6.1.4.1.11.2.14.11.15.2.76,HPN-ICF-OID-MIB::hpnicfE1T1VI,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.2.76.1,HPN-ICF-E1T1VI-MIB::hpnicfE1T1VITable,,not-accessible,,current,,This table contains E1/T1 voice interface information, such as the total number of using time slot.
.1.3.6.1.4.1.11.2.14.11.15.2.76.1.1,HPN-ICF-E1T1VI-MIB::hpnicfE1T1VIEntry,,not-accessible,ifIndex,current,,This entry contains E1/T1 voice interface information. The index of this Entry is ifIndex defined in ifTable of RFC1213-MIB.
.1.3.6.1.4.1.11.2.14.11.15.2.76.1.1.1,HPN-ICF-E1T1VI-MIB::hpnicfE1T1VIUsingTimeslots,Integer32,read-only,,current,,The total number of using time slots on this interface.
.1.3.6.1.4.1.11.2.14.11.15.2.76.1.1.2,HPN-ICF-E1T1VI-MIB::hpnicfE1T1VIUsingTimeslotsRatio,Integer32,read-only,,current,,The total ratio of using time slots on this interface.
.1.3.6.1.4.1.11.2.14.11.15.2.76.2,HPN-ICF-E1T1VI-MIB::hpnicfE1T1VINotifications,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.2.76.2.0,HPN-ICF-E1T1VI-MIB::hpnicfE1T1VITrapPrefix,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.2.76.2.0.1,HPN-ICF-E1T1VI-MIB::hpnicfE1T1VITrapTimeSlot,,,,,,This trap is sent to the manager under the following condidion: All the available time slots of a E1/T1 voice interface has been in use.
.1.3.6.1.4.1.11.2.14.11.15.2.76.3,HPN-ICF-E1T1VI-MIB::hpnicfE1T1VIGeneral,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.2.76.3.1,HPN-ICF-E1T1VI-MIB::hpnicfE1T1VITrapTimeSlotEnable,INTEGER,read-write,,current,enable(1):disable(2),This attribute controls whether the hpnicfE1T1VITrapTimeSlot trap will be sent or not.
.1.3.6.1.4.1.11.2.14.11.15.2.78,HPN-ICF-OID-MIB::hpnicfL2VpnPwe3,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.2.78.1,HPN-ICF-L2VPN-PWE3-MIB::hpnicfL2VpnPwe3ScalarGroup,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.2.78.1.1,HPN-ICF-L2VPN-PWE3-MIB::hpnicfPwVcTrapOpen,INTEGER,read-write,,current,true(1):false(2),Whether pwe3 trap is globally enabled. false: disable; true: enable.
.1.3.6.1.4.1.11.2.14.11.15.2.78.2,HPN-ICF-L2VPN-PWE3-MIB::hpnicfL2VpnPwe3Table,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.2.78.2.1,HPN-ICF-L2VPN-PWE3-MIB::hpnicfPwVcTable,,not-accessible,,current,,This table is the VC configuration table. Users can create or delete a VC by it.
.1.3.6.1.4.1.11.2.14.11.15.2.78.2.1.1,HPN-ICF-L2VPN-PWE3-MIB::hpnicfPwVcEntry,,not-accessible,hpnicfPwVcIndex,current,,Provides the information of a VC entry.
.1.3.6.1.4.1.11.2.14.11.15.2.78.2.1.1.1,HPN-ICF-L2VPN-PWE3-MIB::hpnicfPwVcIndex,Integer32,not-accessible,,current,,Index for the conceptual row identifying a PW within this PW Emulation table.
.1.3.6.1.4.1.11.2.14.11.15.2.78.2.1.1.2,HPN-ICF-L2VPN-PWE3-MIB::hpnicfPwVcID,Unsigned32,read-create,,current,,Used in the outgoing PW ID field within the 'Virtual Circuit FEC Element'.
.1.3.6.1.4.1.11.2.14.11.15.2.78.2.1.1.3,HPN-ICF-L2VPN-PWE3-MIB::hpnicfPwVcType,INTEGER,read-create,,current,frameRelayDlciMartini(1):atmAal5SduVccTransport(2):atmTransparentCellTransport(3):ethernetTagged(4):ethernet(5):hdlc(6):ppp(7):cem(8):atmN2OneVccCellTransport(9):atmN2OneVpcCellTransport(10):ipLayer2Transport(11):atmOne2OneVccCellMode(12):atmOne2OneVpcCellMode(13):atmAal5PduVccTransport(14):frameRelayPortMode(15):cep(16):saE1oP(17):saT1oP(18):saE3oP(19):saT3oP(20):cESoPsnBasicMode(21):tDMoIPbasicMode(22):l2VpnCESoPSNTDMwithCAS(23):l2VpnTDMoIPTDMwithCAS(24):frameRelayDlci(25):ipInterworking(64):unknown(255),Indication of the L2Vpn's VC encapsulation type.
.1.3.6.1.4.1.11.2.14.11.15.2.78.2.1.1.4,HPN-ICF-L2VPN-PWE3-MIB::hpnicfPwVcPeerAddr,IpAddress,read-create,,current,,This object contain the value of the peer ip address of the Martini VLL PW.
.1.3.6.1.4.1.11.2.14.11.15.2.78.2.1.1.5,HPN-ICF-L2VPN-PWE3-MIB::hpnicfPwVcMtu,Unsigned32,read-create,,current,,If not equal zero, the optional Mtu object in the signaling protocol will be sent with this value, representing the locally supported MTU size over the interface (or the virtual interface) associated with the PW. The default value is 1500.
.1.3.6.1.4.1.11.2.14.11.15.2.78.2.1.1.6,HPN-ICF-L2VPN-PWE3-MIB::hpnicfPwVcCfgType,INTEGER,read-create,,current,primary(1):backup(2):multiPort(3),Indicates the type of the pw: 1: primary; 2: backup; 3: multiPort.
.1.3.6.1.4.1.11.2.14.11.15.2.78.2.1.1.7,HPN-ICF-L2VPN-PWE3-MIB::hpnicfPwVcInboundLabel,Unsigned32,read-only,,current,,For Martini VLL, the value will be created by system automatically.
.1.3.6.1.4.1.11.2.14.11.15.2.78.2.1.1.8,HPN-ICF-L2VPN-PWE3-MIB::hpnicfPwVcOutboundLabel,Unsigned32,read-only,,current,,For Martini VLL, the value will be created by the peer automatically.
.1.3.6.1.4.1.11.2.14.11.15.2.78.2.1.1.9,HPN-ICF-L2VPN-PWE3-MIB::hpnicfPwVcIfIndex,Unsigned32,read-create,,current,,Index of the interface (or the virtual interface) associated with the PW.
.1.3.6.1.4.1.11.2.14.11.15.2.78.2.1.1.10,HPN-ICF-L2VPN-PWE3-MIB::hpnicfPwVcAcStatus,INTEGER,read-only,,current,down(1):up(2),Local AC(Attachment Circuit) status: 1: down; 2: up.
.1.3.6.1.4.1.11.2.14.11.15.2.78.2.1.1.11,HPN-ICF-L2VPN-PWE3-MIB::hpnicfPwVcStatus,INTEGER,read-only,,current,down(1):up(2),Indicates the status of the PW in the local node. 1: down; 2: up.
.1.3.6.1.4.1.11.2.14.11.15.2.78.2.1.1.12,HPN-ICF-L2VPN-PWE3-MIB::hpnicfPwVcRowStatus,INTEGER,read-create,,current,active(1):notInService(2):notReady(3):createAndGo(4):createAndWait(5):destroy(6),This object is responsible for managing the creation, deletion and modification of rows, which support active status and CreatAndGo, destroy operation. To create a new row, hpnicfPwVcID, hpnicfPwVcType, hpnicfPwVcPeerAddr hpnicfPwVcMtu, hpnicfPwVcCfgType and hpnicfPwVcIfIndex must be specified.
.1.3.6.1.4.1.11.2.14.11.15.2.78.3,HPN-ICF-L2VPN-PWE3-MIB::hpnicfL2VpnPwe3Notifications,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.2.78.3.1,HPN-ICF-L2VPN-PWE3-MIB::hpnicfPwVcSwitchWtoP,,,,,,This notification is generated when switch from working pw to protect pw happens. The first group of hpnicfPwVcID/hpnicfPwVcType/hpnicfPwVcPeerAddr is parameter of the work PW , and the second group of hpnicfPwVcID/hpnicfPwVcType/hpnicfPwVcPeerAddr is parameter of the protect PW.
.1.3.6.1.4.1.11.2.14.11.15.2.78.3.2,HPN-ICF-L2VPN-PWE3-MIB::hpnicfPwVcSwitchPtoW,,,,,,This notification is generated when switch from protect pw to working pw happens. The first group of hpnicfPwVcID/hpnicfPwVcTypehpnicfPwVcPeerAddr is parameter of the protect PW , and the second group of hpnicfPwVcID/hpnicfPwVcType/hpnicfPwVcPeerAddr is parameter of the work PW.
.1.3.6.1.4.1.11.2.14.11.15.2.78.3.3,HPN-ICF-L2VPN-PWE3-MIB::hpnicfPwVcDown,,,,,,This notification indicates the VC's state changes to down.
.1.3.6.1.4.1.11.2.14.11.15.2.78.3.4,HPN-ICF-L2VPN-PWE3-MIB::hpnicfPwVcUp,,,,,,This notification indicates the VC's state changes to up.
.1.3.6.1.4.1.11.2.14.11.15.2.78.3.5,HPN-ICF-L2VPN-PWE3-MIB::hpnicfPwVcDeleted,,,,,,This notification indicates the VC is deleted.
.1.3.6.1.4.1.11.2.14.11.15.2.79,HPN-ICF-OID-MIB::hpnicfMplsOam,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.2.79.1,HPN-ICF-MPLSOAM-MIB::hpnicfMplsOamScalarGroup,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.2.79.1.1,HPN-ICF-MPLSOAM-MIB::hpnicfMplsOamCapability,INTEGER,read-write,,current,true(1):false(2),Whether OAM is globally capable. false: incapable; true: capable; The default value is incapable.
.1.3.6.1.4.1.11.2.14.11.15.2.79.1.2,HPN-ICF-MPLSOAM-MIB::hpnicfMplsOamTrapOpen,INTEGER,read-write,,current,true(1):false(2),Whether OAM trap is globally enabled. false: disable; true: enable; The default value is disable.
.1.3.6.1.4.1.11.2.14.11.15.2.79.2,HPN-ICF-MPLSOAM-MIB::hpnicfMplsOamTable,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.2.79.2.1,HPN-ICF-MPLSOAM-MIB::hpnicfMplsOamIgrTable,,not-accessible,,current,,This table specifies per-LSP MPLS OAM ingress capability and associated information, such as IgrLspName and IgrDetType.
.1.3.6.1.4.1.11.2.14.11.15.2.79.2.1.1,HPN-ICF-MPLSOAM-MIB::hpnicfMplsOamIgrEntry,,not-accessible,hpnicfMplsOamIgrIndex,current,,An entry in this table is created by an LSR for every LSP capable of supporting MPLS OAM at ingress.
.1.3.6.1.4.1.11.2.14.11.15.2.79.2.1.1.1,HPN-ICF-MPLSOAM-MIB::hpnicfMplsOamIgrIndex,Unsigned32,not-accessible,,current,,This is an unique index for an OAM ingress entry in the OAM table.
.1.3.6.1.4.1.11.2.14.11.15.2.79.2.1.1.2,HPN-ICF-MPLSOAM-MIB::hpnicfMplsOamIgrLspName,OCTET,read-create,,current,,The name of an LSP. It means the LSP name of the detected LSP.
.1.3.6.1.4.1.11.2.14.11.15.2.79.2.1.1.3,HPN-ICF-MPLSOAM-MIB::hpnicfMplsOamIgrDetectType,INTEGER,read-create,,current,cv(1):ffd(2),There are two types of OAM packets, CV and FFD. The CV flow is generated at the source LSR of the LSP with a nominal frequency of 1/s and terminated at the sink LSR of the LSP. FFD provides failure detection option for an LSP independent of the CV based availability model and is not tied to the CV insertion rate. Insertion rates at 1/s or faster may also be used. The CV/FFD packet contains a network-unique identifier (TTSI) so that all types of defects can be detected. 1: CV; 2: FFD.
.1.3.6.1.4.1.11.2.14.11.15.2.79.2.1.1.4,HPN-ICF-MPLSOAM-MIB::hpnicfMplsOamIgrDetectFreq,INTEGER,read-create,,current,ffd10ms(1):ffd20ms(2):ffd50ms(3):ffd100ms(4):ffd200ms(5):ffd500ms(6):cv1000ms(7),Indication of the OAM's frequent type.
.1.3.6.1.4.1.11.2.14.11.15.2.79.2.1.1.5,HPN-ICF-MPLSOAM-MIB::hpnicfMplsOamIgrRevType,INTEGER,read-create,,current,private(1):share(2),When an LSP is found to be in defect, the sink LSR of the LSP should send BDI to inform the source LSR of the LSP, the BDI is transferred through the reverse LSP. The type of reverse LSP can be private or shared. If private, then the reverse LSP can be used only by the oam ingress; If shared, the reverse LSP which is shared between many forward LSPs, whose source LSRs are the same and sink LSRs are the same. 1: private; 2: share.
.1.3.6.1.4.1.11.2.14.11.15.2.79.2.1.1.6,HPN-ICF-MPLSOAM-MIB::hpnicfMplsOamIgrRevLspName,OCTET,read-create,,current,,The object indicates the name of the reverse LSP.
.1.3.6.1.4.1.11.2.14.11.15.2.79.2.1.1.7,HPN-ICF-MPLSOAM-MIB::hpnicfMplsOamIgrLspId,Integer32,read-create,,current,,For ingress, the object indicates the lsp ID of the detected LSP.
.1.3.6.1.4.1.11.2.14.11.15.2.79.2.1.1.8,HPN-ICF-MPLSOAM-MIB::hpnicfMplsOamIgrEnable,INTEGER,read-create,,current,true(1):false(2),Whether one LSP is OAM enable. If disable, LSP is not monitored; If enable, CV/FFD is generated at the source LSR of the LSP and checked at the sink LSR of the LSP, and user can set other configuration. false: The OAM function is disabled on the ingress; true: The OAM function is enabled on the ingress.
.1.3.6.1.4.1.11.2.14.11.15.2.79.2.1.1.9,HPN-ICF-MPLSOAM-MIB::hpnicfMplsOamIgrDefectType,INTEGER,read-only,,current,dServer(1):dPeerMe(2):dLOCV(3):dTTSIMismatch(4):dTTSIMismerge(5):dExcess(6):dUnknown(7):dRlsnDown(8):dLspDown(9):dME(10):noDefect(11),Indication of the OAM's defect type.
.1.3.6.1.4.1.11.2.14.11.15.2.79.2.1.1.10,HPN-ICF-MPLSOAM-MIB::hpnicfMplsOamIgrRowStatus,INTEGER,read-create,,current,active(1):notInService(2):notReady(3):createAndGo(4):createAndWait(5):destroy(6),This object is responsible for managing the creation, deletion and modification of rows, which support active status and CreatAndGo, destroy operation. To create a new row, hpnicfMplsOamIgrLspName, hpnicfMplsOamIgrDetectType, hpnicfMplsOamIgrDetectFreq, hpnicfMplsOamIgrRevType, hpnicfMplsOamIgrRevLspName, and hpnicfMplsOamIgrLspId must be specified.
.1.3.6.1.4.1.11.2.14.11.15.2.79.2.2,HPN-ICF-MPLSOAM-MIB::hpnicfMplsOamEgrTable,,not-accessible,,current,,This table specifies per-LSP MPLS OAM capability and associated information, such as DetectType, DetectFrequency.
.1.3.6.1.4.1.11.2.14.11.15.2.79.2.2.1,HPN-ICF-MPLSOAM-MIB::hpnicfMplsOamEgrEntry,,not-accessible,hpnicfMplsOamEgrIndex,current,,An entry in this table is created by an LSR for every LSP capable of supporting MPLS OAM at egress.
.1.3.6.1.4.1.11.2.14.11.15.2.79.2.2.1.1,HPN-ICF-MPLSOAM-MIB::hpnicfMplsOamEgrIndex,Unsigned32,not-accessible,,current,,This is a unique index for an OAM egress entry in the OAM table.
.1.3.6.1.4.1.11.2.14.11.15.2.79.2.2.1.2,HPN-ICF-MPLSOAM-MIB::hpnicfMplsOamEgrLspName,OCTET,read-create,,current,,The object indicates the name of static LSP at egress.
.1.3.6.1.4.1.11.2.14.11.15.2.79.2.2.1.3,HPN-ICF-MPLSOAM-MIB::hpnicfMplsOamEgrDetectType,INTEGER,read-create,,current,cv(1):ffd(2),There are two types of OAM packets, CV and FFD. The CV flow is generated at the source LSR of the LSP with a nominal frequency of 1/s and terminated at the sink LSR of the LSP. FFD provides failure detection option for an LSP independent of the CV based availability model and is not tied to the CV insertion rate. Insertion rates at 1/s or faster may also be used. The CV/FFD packet contains a network-unique identifier (TTSI) so that all types of defects can be detected. 1: CV; 2: FFD.
.1.3.6.1.4.1.11.2.14.11.15.2.79.2.2.1.4,HPN-ICF-MPLSOAM-MIB::hpnicfMplsOamEgrDetectFreq,INTEGER,read-create,,current,ffd10ms(1):ffd20ms(2):ffd50ms(3):ffd100ms(4):ffd200ms(5):ffd500ms(6):cv1000ms(7),Indication of the OAM's frequent type.
.1.3.6.1.4.1.11.2.14.11.15.2.79.2.2.1.5,HPN-ICF-MPLSOAM-MIB::hpnicfMplsOamEgrRevType,INTEGER,read-create,,current,private(1):share(2),When an LSP is found to be in defect, the sink LSR of the LSP should send BDI to inform the source LSR of the LSP, the BDI is transferred through the reverse LSP. The type of reverse LSP can be private or shared. If private, then the reverse LSP can be used only when the only LSP in defect; If shared, the reverse LSP, which is shared between many forward LSPs that have the same source LSRs and sink LSRs. 1: private; 2: share.
.1.3.6.1.4.1.11.2.14.11.15.2.79.2.2.1.6,HPN-ICF-MPLSOAM-MIB::hpnicfMplsOamEgrRevLspName,OCTET,read-create,,current,,The object indicates the name of a reverse static-lsp.
.1.3.6.1.4.1.11.2.14.11.15.2.79.2.2.1.7,HPN-ICF-MPLSOAM-MIB::hpnicfMplsOamEgrLsrId,IpAddress,read-create,,current,,The object indicates the Ingress LSR ID of the LSP.
.1.3.6.1.4.1.11.2.14.11.15.2.79.2.2.1.8,HPN-ICF-MPLSOAM-MIB::hpnicfMplsOamEgrLspId,Integer32,read-create,,current,,The object indicates the the Ingress session lsp ID of the detected static-LSP.
.1.3.6.1.4.1.11.2.14.11.15.2.79.2.2.1.9,HPN-ICF-MPLSOAM-MIB::hpnicfMplsOamEgrEnable,INTEGER,read-create,,current,true(1):false(2),Whether one LSP is enabled with OAM. If disable, LSP is not monitored; If enable, CV/FFD is generated at the source LSR of the LSP and checked at the sink LSR of the LSP, and user can set other configuration. false: The OAM function is disabled on the egress; true: The OAM function is enabled on the egress.
.1.3.6.1.4.1.11.2.14.11.15.2.79.2.2.1.10,HPN-ICF-MPLSOAM-MIB::hpnicfMplsOamEgrDefectType,INTEGER,read-only,,current,dServer(1):dPeerMe(2):dLOCV(3):dTTSIMismatch(4):dTTSIMismerge(5):dExcess(6):dUnknown(7):dRlsnDown(8):dLspDown(9):dME(10):noDefect(11),Indication of the OAM's defect type.
.1.3.6.1.4.1.11.2.14.11.15.2.79.2.2.1.11,HPN-ICF-MPLSOAM-MIB::hpnicfMplsOamEgrRowStatus,INTEGER,read-create,,current,active(1):notInService(2):notReady(3):createAndGo(4):createAndWait(5):destroy(6),This object is responsible for managing the creation, deletion and modification of rows, which support active status and CreatAndGo, destroy operation. To create a new row, hpnicfMplsOamEgrLspName, hpnicfMplsOamEgrDetectType, hpnicfMplsOamEgrDetectFreq, hpnicfMplsOamEgrRevType, hpnicfMplsOamEgrRevLspName, hpnicfMplsOamEgrLsrId and hpnicfMplsOamEgrLspId must be specified.
.1.3.6.1.4.1.11.2.14.11.15.2.79.3,HPN-ICF-MPLSOAM-MIB::hpnicfMplsOamNotifications,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.2.79.3.1,HPN-ICF-MPLSOAM-MIB::hpnicfMplsOamIgrLSPOutDefect,,,,,,This notification is generated when the LSP is found out of the defect state at the LSP ingress.
.1.3.6.1.4.1.11.2.14.11.15.2.79.3.2,HPN-ICF-MPLSOAM-MIB::hpnicfMplsOamIgrLSPInDefect,,,,,,This notification is generated when the LSP is found in the defect state at the LSP ingress.
.1.3.6.1.4.1.11.2.14.11.15.2.79.3.3,HPN-ICF-MPLSOAM-MIB::hpnicfMplsOamEgrLSPOutDefect,,,,,,This notification is generated when the LSP is found out of the defect state at the LSP egress.
.1.3.6.1.4.1.11.2.14.11.15.2.79.3.4,HPN-ICF-MPLSOAM-MIB::hpnicfMplsOamEgrLSPInDefect,,,,,,This notification is generated when the LSP is found in the defect state at the LSP egress.
.1.3.6.1.4.1.11.2.14.11.15.2.80,HPN-ICF-OID-MIB::hpnicfMplsOamPs,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.2.80.1,HPN-ICF-MPLSOAM-PS-MIB::hpnicfMplsOamPsScalarGroup,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.2.80.1.1,HPN-ICF-MPLSOAM-PS-MIB::hpnicfMplsOamPsTrapOpen,INTEGER,read-write,,current,true(1):false(2),Whether mpls protect-switch trap is globally enabled. false: disable; true: enable
.1.3.6.1.4.1.11.2.14.11.15.2.80.2,HPN-ICF-MPLSOAM-PS-MIB::hpnicfMplsOamPsTable,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.2.80.2.1,HPN-ICF-MPLSOAM-PS-MIB::hpnicfMplsPsTable,,not-accessible,,current,,This table specifies per-protection-group MPLS PS capability and associated information.
.1.3.6.1.4.1.11.2.14.11.15.2.80.2.1.1,HPN-ICF-MPLSOAM-PS-MIB::hpnicfMplsPsEntry,,not-accessible,hpnicfMplsPsIndex,current,,An entry in this table is created by an LSR for every protection group capable of supporting mpls ps.
.1.3.6.1.4.1.11.2.14.11.15.2.80.2.1.1.1,HPN-ICF-MPLSOAM-PS-MIB::hpnicfMplsPsIndex,Integer32,not-accessible,,current,,This is a unique index for an entry in the mplspsEntry.
.1.3.6.1.4.1.11.2.14.11.15.2.80.2.1.1.2,HPN-ICF-MPLSOAM-PS-MIB::hpnicfMplsPsGroupID,Integer32,read-create,,current,,This is a unique group id for an entry in the mplspsEntry. One protect-switch group is composed of one working static-lsp and one protection static-lsp.
.1.3.6.1.4.1.11.2.14.11.15.2.80.2.1.1.3,HPN-ICF-MPLSOAM-PS-MIB::hpnicfMplsPsWorkLspName,OCTET,read-create,,current,,The name of the working static-lsp.
.1.3.6.1.4.1.11.2.14.11.15.2.80.2.1.1.4,HPN-ICF-MPLSOAM-PS-MIB::hpnicfMplsPsProtectLspName,OCTET,read-create,,current,,The name of the protection static-lsp.
.1.3.6.1.4.1.11.2.14.11.15.2.80.2.1.1.5,HPN-ICF-MPLSOAM-PS-MIB::hpnicfMplsPsRevertiveMode,Integer32,read-create,,current,,Revertive mode is a protection switching mode where revertive action (switch back to the working LSP) is taken after the working LSP is repaired. And switching does not occur in a non-revertive mode. 1: revertive; 2: non-revertive;
.1.3.6.1.4.1.11.2.14.11.15.2.80.2.1.1.6,HPN-ICF-MPLSOAM-PS-MIB::hpnicfMplsPsWTR,Integer32,read-create,,current,,Wait to Restore timer is only applicable for the revertive mode and applies to a working LSP, it prevents reversion back to select the working LSP until the Wait to Restore timer has expired. The default value is 12 minutes. step is 30s.
.1.3.6.1.4.1.11.2.14.11.15.2.80.2.1.1.7,HPN-ICF-MPLSOAM-PS-MIB::hpnicfMplsPsHoldOff,Integer32,read-create,,current,,The time between declaration of signal degrade or signal fail, and the initialization of the protection switching algorithm. Step is 100ms, maximum is 10s.
.1.3.6.1.4.1.11.2.14.11.15.2.80.2.1.1.8,HPN-ICF-MPLSOAM-PS-MIB::hpnicfMplsPsSwitchCondition,Integer32,read-create,,current,,The current switch condition of the protection group. 1: clear, this command clears all of the externally initiated switch commands listed below; 2: lockout of protection, fix the selector position on the working LSP, Prevents the selector from switching to the protection LSP when it is selecting the working LSP. Switches the selector from the protection to the working LSP when it is selecting the protection LSP; 3: forced protection, switches the selector from the working LSP to the protection LSP (unless a higher priority switch request (i.e., LoP) is in effect); 4: signal fail, for 1:1, Signal Fail (SF) is declared when the source of the protection domain enters the Defect State by receiving a BDI packet (from the return LSP or out of band). 5: manual switch for working-lsp, switches the selector from the working LSP to the protection LSP (unless an equal or higher priority switch request (i.e., LoP, FS, SF or MS) is in effect); 6: manual switch for protection-lsp, switches the selector from the protection LSP to the working LSP (unless an equal or higher priority switch request (i.e., LoP, FS, SF or MS) is in effect). 7: WTR-timer, a configurable timer which is used to delay before reversion; 8: HoldOff-timer, the time between declaration of signal degrade or signal fail, and the initialization of the protection switching algorithm; 9: Others; The pripority of the commands are: clear > lockout of protection > force switch > manual switch for working lsp = manual switch for protection lsp
.1.3.6.1.4.1.11.2.14.11.15.2.80.2.1.1.9,HPN-ICF-MPLSOAM-PS-MIB::hpnicfMplsPsWorkLspDetectState,Integer32,read-only,,current,,The state of working static-lsp state in one protection group, whether it is in defect: 1: it is out of defect; 2: it enters defect.
.1.3.6.1.4.1.11.2.14.11.15.2.80.2.1.1.10,HPN-ICF-MPLSOAM-PS-MIB::hpnicfMplsPsWorkLspUpDownState,Integer32,read-only,,current,,The state of working static-lsp state in one protection group, whether it is up or down: 1: it is in up state; 2: it is in down state.
.1.3.6.1.4.1.11.2.14.11.15.2.80.2.1.1.11,HPN-ICF-MPLSOAM-PS-MIB::hpnicfMplsPsProtLspDetectState,Integer32,read-only,,current,,The state of protection static-lsp state in one protection group, whether it is in detection: 1: it is out of defect; 2: it enters defect.
.1.3.6.1.4.1.11.2.14.11.15.2.80.2.1.1.12,HPN-ICF-MPLSOAM-PS-MIB::hpnicfMplsPsProtLspUpDownState,Integer32,read-only,,current,,The state of protection static-lsp state in one protection group, whether it is up or down: 1: it is in up state; 2: it is in down state.
.1.3.6.1.4.1.11.2.14.11.15.2.80.2.1.1.13,HPN-ICF-MPLSOAM-PS-MIB::hpnicfMplsPsSwitchResult,Integer32,read-only,,current,,Which tunnel is used to transfer the data stream. 1: working static-lsp; 2: protection static-lsp.
.1.3.6.1.4.1.11.2.14.11.15.2.80.2.1.1.14,HPN-ICF-MPLSOAM-PS-MIB::hpnicfMplsPsRowStatus,INTEGER,read-create,,current,active(1):notInService(2):notReady(3):createAndGo(4):createAndWait(5):destroy(6),This object is responsible for managing the creation, deletion and modification of rows, which support active status and CreatAndGo, destroy operation. To create a new row, hpnicfMplsPsGroupID, hpnicfMplsPsWorkLspName, hpnicfMplsPsProtectLspName, hpnicfMplsPsRevertiveMode, hpnicfMplsPsWTR and hpnicfMplsPsHoldOff must be specified.
.1.3.6.1.4.1.11.2.14.11.15.2.80.3,HPN-ICF-MPLSOAM-PS-MIB::hpnicfMplsOamPsNotifications,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.2.80.3.1,HPN-ICF-MPLSOAM-PS-MIB::hpnicfMplsPsSwitchPtoW,,,,,,This notification is generated when switching from protection-lsp to working-lsp occured.
.1.3.6.1.4.1.11.2.14.11.15.2.80.3.2,HPN-ICF-MPLSOAM-PS-MIB::hpnicfMplsPsSwitchWtoP,,,,,,This notification is generated when switching from woking-lsp to protection-lsp occured.
.1.3.6.1.4.1.11.2.14.11.15.2.81,HPN-ICF-OID-MIB::hpnicfSiemMib,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.2.82,HPN-ICF-OID-MIB::hpnicfUps,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.2.82.1,HPN-ICF-UPS-MIB::hpnicfUpsMibObjects,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.2.82.1.1,HPN-ICF-UPS-MIB::hpnicfUpsConfigEnable,INTEGER,read-write,,current,action(1):invalid(2),This object identifies the operation which will make the UPS(Uninterrupted Power Supply)'s new configure become effective.
.1.3.6.1.4.1.11.2.14.11.15.2.82.1.2,HPN-ICF-UPS-MIB::hpnicfUpsConfigTable,,not-accessible,,current,,This table contains an entry for user to get some information about the UPS device.
.1.3.6.1.4.1.11.2.14.11.15.2.82.1.2.1,HPN-ICF-UPS-MIB::hpnicfUpsConfigEntry,,not-accessible,hpnicfUpsIndex,current,,An entry containing management information applicable to a particular UPS.
.1.3.6.1.4.1.11.2.14.11.15.2.82.1.2.1.1,HPN-ICF-UPS-MIB::hpnicfUpsIndex,Integer32,not-accessible,,current,,This object identifies the index of hpnicfUpsConfigTable. The object identified by this index is the same object as identified by the same value of entPhysicalIndex.
.1.3.6.1.4.1.11.2.14.11.15.2.82.1.2.1.2,HPN-ICF-UPS-MIB::hpnicfUpsType,INTEGER,read-only,,current,emersonUart(1):mge(2):common(3):emersonEth(4):liebert(5),This object identifies the type of UPS. The value 'emersonUart' means an EMERSON UPS support UART interface. The value 'mge' means a MGE UPS support ethernet interface. The value 'common' means a common UPS support standard UPSMIB. The value 'emersonEth' means an EMERSON UPS support ethernet interface. The value 'liebert' means a Liebert UPS support ethernet interface.
.1.3.6.1.4.1.11.2.14.11.15.2.82.1.2.1.3,HPN-ICF-UPS-MIB::hpnicfUpsIpAddress,OCTET,read-write,,current,,This object describes the address of UPS. The value of this object is invalid if the UPS do not support ethernet interface.
.1.3.6.1.4.1.11.2.14.11.15.2.82.1.2.1.4,HPN-ICF-UPS-MIB::hpnicfUpsIpAddressType,INTEGER,read-write,,current,unknown(0):ipv4(1):ipv6(2):ipv4z(3):ipv6z(4):dns(16),This object describes the address type of UPS. The value of this object is invalid if the UPS do not support ethernet interface.
.1.3.6.1.4.1.11.2.14.11.15.2.83,HPN-ICF-OID-MIB::hpnicfEOCCommon,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.2.83.1,HPN-ICF-EOC-COMMON-MIB::hpnicfEOCCommonSysMan,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.2.83.1.1,HPN-ICF-EOC-COMMON-MIB::hpnicfEOCCommonSysScalarObjects,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.2.83.1.1.1,HPN-ICF-EOC-COMMON-MIB::hpnicfEOCCommonSysVersion,OCTET,read-only,,current,, Eoc version. If the object length is zero, it means the version is unknown. The length is up to 1024. 
.1.3.6.1.4.1.11.2.14.11.15.2.83.1.1.2,HPN-ICF-EOC-COMMON-MIB::hpnicfEOCCommonUpLinkMacAddress,OCTET,read-only,,current,, EOC CLT's uplink device's mac address. 
.1.3.6.1.4.1.11.2.14.11.15.2.83.2,HPN-ICF-EOC-COMMON-MIB::hpnicfEOCCommonCltMan,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.2.83.2.1,HPN-ICF-EOC-COMMON-MIB::hpnicfEOCCommonCltManTable,,not-accessible,,current,, This table defines the primary parameters of the CLT configuration. 
.1.3.6.1.4.1.11.2.14.11.15.2.83.2.1.1,HPN-ICF-EOC-COMMON-MIB::hpnicfEOCCommonCltManEntry,,not-accessible,ifIndex,current,, The entry of the table hpnicfEOCCommonCltManTable. 
.1.3.6.1.4.1.11.2.14.11.15.2.83.2.1.1.1,HPN-ICF-EOC-COMMON-MIB::hpnicfEOCCommonCltAutoAuthorize,INTEGER,read-write,,current,true(1):false(2), This value determines whether software performs self-authorization for each Cable Network Unit(CNU) registering to the network. Setting it to false means for every CNU registering, software requires external authorization, and until it's done the CNU is not authenticated. True value means software authorizes each CNU registering to the network automatically. 
.1.3.6.1.4.1.11.2.14.11.15.2.83.2.1.1.2,HPN-ICF-EOC-COMMON-MIB::hpnicfEOCCommonCltMaxAllowToAccess,Integer32,read-write,,current,, This value determines how many CNU can be bound in this CLT. If the number of CNU is more than this value , then the rest of CNU should not be allow to access. 
.1.3.6.1.4.1.11.2.14.11.15.2.83.3,HPN-ICF-EOC-COMMON-MIB::hpnicfEOCComCnuMan,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.2.83.3.1,HPN-ICF-EOC-COMMON-MIB::hpnicfEOCComCnuScalarObjects,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.2.83.3.1.1,HPN-ICF-EOC-COMMON-MIB::hpnicfEOCComCnuMaxDownBWMinVal,Integer32,read-only,,current,, The lower limit of total-bandwidth which is confined to hpnicfEOCComCnuMaxDownBW.
.1.3.6.1.4.1.11.2.14.11.15.2.83.3.1.2,HPN-ICF-EOC-COMMON-MIB::hpnicfEOCComCnuMaxDownBWMaxVal,Integer32,read-only,,current,, The upper limit of total-bandwidth which is confined to hpnicfEOCComCnuMaxDownBW.
.1.3.6.1.4.1.11.2.14.11.15.2.83.3.1.3,HPN-ICF-EOC-COMMON-MIB::hpnicfEOCComCnuSlaHighPriBWMinVal,Integer32,read-only,,current,, The lower limit of high priority bandwidth which is confined to hpnicfEOCComCnuSlaHighPriBW.
.1.3.6.1.4.1.11.2.14.11.15.2.83.3.1.4,HPN-ICF-EOC-COMMON-MIB::hpnicfEOCComCnuSlaHighPriBWMaxVal,Integer32,read-only,,current,, The upper limit of high priority bandwidth which is confined to hpnicfEOCComCnuSlaHighPriBW.
.1.3.6.1.4.1.11.2.14.11.15.2.83.3.1.5,HPN-ICF-EOC-COMMON-MIB::hpnicfEOCComCnuMaxUpBWMinVal,Integer32,read-only,,current,, The lower limit of total-bandwidth which is confined to hpnicfEOCComCnuMaxUpBW.
.1.3.6.1.4.1.11.2.14.11.15.2.83.3.1.6,HPN-ICF-EOC-COMMON-MIB::hpnicfEOCComCnuMaxUpBWMaxVal,Integer32,read-only,,current,, The upper limit of total-bandwidth which is confined to hpnicfEOCComCnuMaxUpBW.
.1.3.6.1.4.1.11.2.14.11.15.2.83.3.1.7,HPN-ICF-EOC-COMMON-MIB::hpnicfEOCComCnuAttenThrA,Integer32,read-write,,current,, The value of cnu's average attenuation good level thresholds. 
.1.3.6.1.4.1.11.2.14.11.15.2.83.3.1.8,HPN-ICF-EOC-COMMON-MIB::hpnicfEOCComCnuAttenThrB,Integer32,read-write,,current,, The value of cnu's average attenuation normal level thresholds. 
.1.3.6.1.4.1.11.2.14.11.15.2.83.3.1.9,HPN-ICF-EOC-COMMON-MIB::hpnicfEOCComCnuRateDropThr,Integer32,read-write,,current,, The value of cnu's Tx/Rx rate drop thresholds. 
.1.3.6.1.4.1.11.2.14.11.15.2.83.3.2,HPN-ICF-EOC-COMMON-MIB::hpnicfEOCComCnuSysManTable,,not-accessible,,current,, This table implements the management of CNUs(Coax Network Unit). 
.1.3.6.1.4.1.11.2.14.11.15.2.83.3.2.1,HPN-ICF-EOC-COMMON-MIB::hpnicfEOCComCnuSysManEntry,,not-accessible,ifIndex,current,, The entry of the table hpnicfEOCComCnuSysManTable. 
.1.3.6.1.4.1.11.2.14.11.15.2.83.3.2.1.1,HPN-ICF-EOC-COMMON-MIB::hpnicfEOCComCnuCableIfindex,Integer32,read-only,,current,, The index of cable port which uniquely identifies the cable port of one device. 
.1.3.6.1.4.1.11.2.14.11.15.2.83.3.2.1.2,HPN-ICF-EOC-COMMON-MIB::hpnicfEOCComCnuDeviceType,OCTET,read-write,,current,, The type of the EOC CNU(Coax Network Unit). 
.1.3.6.1.4.1.11.2.14.11.15.2.83.3.2.1.3,HPN-ICF-EOC-COMMON-MIB::hpnicfEOCComCnuDeviceAlias,OCTET,read-write,,current,, EOC CNU's alias which display as the device's name, it's recommended to set it uniquely and understandably. 
.1.3.6.1.4.1.11.2.14.11.15.2.83.3.2.1.4,HPN-ICF-EOC-COMMON-MIB::hpnicfEOCComCnuDescr,OCTET,read-write,,current,, User's description, including user's address, name, telephone number and so on. 
.1.3.6.1.4.1.11.2.14.11.15.2.83.3.2.1.5,HPN-ICF-EOC-COMMON-MIB::hpnicfEOCComCnuUpTime,TimeTicks,read-only,,current,, The time since the CNU last registered to the network. 
.1.3.6.1.4.1.11.2.14.11.15.2.83.3.2.1.6,HPN-ICF-EOC-COMMON-MIB::hpnicfEOCComCnuVLANType,INTEGER,read-write,,current,vLANTrunk(1):access(2):hybrid(3):fabric(4),port vlan types. hybrid (3) port can carry multiple VLANs. If fabric function is supported, fabric(4) means the port is a fabric port.
.1.3.6.1.4.1.11.2.14.11.15.2.83.3.2.1.7,HPN-ICF-EOC-COMMON-MIB::hpnicfEOCComCnuPvid,Integer32,read-write,,current,, The PVID, the VLAN ID assigned to untagged frames or Priority-Tagged frames received on cable interface. 
.1.3.6.1.4.1.11.2.14.11.15.2.83.3.2.1.8,HPN-ICF-EOC-COMMON-MIB::hpnicfEOCComCnuVlanTag,INTEGER,read-write,,current,tagged(1):untagged(2), VLAN is set tagged or untagged on cable interface. 
.1.3.6.1.4.1.11.2.14.11.15.2.83.3.2.1.9,HPN-ICF-EOC-COMMON-MIB::hpnicfEOCComCnuReset,INTEGER,read-write,,current,running(1):reset(2), This variable is used to reset the CNU device. The interface may be unavailable while the reset occurs and data may be lost. During reading operation it returns the state of the CNU device. running(1) indicates and operates normal operation, reset(2) indicates and operates reset mode. Writing can be done all the time. 
.1.3.6.1.4.1.11.2.14.11.15.2.83.3.2.1.10,HPN-ICF-EOC-COMMON-MIB::hpnicfEOCComCnuDeregister,INTEGER,read-write,,current,deregister(1), deregister CNU. 
.1.3.6.1.4.1.11.2.14.11.15.2.83.3.2.1.11,HPN-ICF-EOC-COMMON-MIB::hpnicfEOCComCnuSave,INTEGER,read-write,,current,save(1):running(2), Save the UNI and CNU related configurations to the CNU. 
.1.3.6.1.4.1.11.2.14.11.15.2.83.3.2.1.12,HPN-ICF-EOC-COMMON-MIB::hpnicfEOCComCnuAccess,INTEGER,read-write,,current,access(1):notaccess(2), Control whether the user can access to the network. 
.1.3.6.1.4.1.11.2.14.11.15.2.83.3.3,HPN-ICF-EOC-COMMON-MIB::hpnicfEOCComCnuMacTable,,not-accessible,,current,, This table implements the management of CNUs. 
.1.3.6.1.4.1.11.2.14.11.15.2.83.3.3.1,HPN-ICF-EOC-COMMON-MIB::hpnicfEOCComCnuMacEntry,,not-accessible,ifIndex,current,, The entry of the table hpnicfEOCComCnuMacTable. 
.1.3.6.1.4.1.11.2.14.11.15.2.83.3.3.1.1,HPN-ICF-EOC-COMMON-MIB::hpnicfEOCComCnuMacAddress,OCTET,read-create,,current,, EOC CNU's MAC address. 
.1.3.6.1.4.1.11.2.14.11.15.2.83.3.3.1.2,HPN-ICF-EOC-COMMON-MIB::hpnicfEOCComCnuRowStatus,INTEGER,read-create,,current,active(1):notInService(2):notReady(3):createAndGo(4):createAndWait(5):destroy(6), Operation status. 
.1.3.6.1.4.1.11.2.14.11.15.2.83.3.3.1.3,HPN-ICF-EOC-COMMON-MIB::hpnicfEOCComCnuTempIndex,Integer32,read-write,,current,, EOC CNU's model index from hpnicfHPEOCTemplateIndex, If configure 0, the CNU select no model. 
.1.3.6.1.4.1.11.2.14.11.15.2.83.3.4,HPN-ICF-EOC-COMMON-MIB::hpnicfEOCComCnuInfoTable,,not-accessible,,current,, Primary status of the specified CNU. There will be one row in this table for each information in the system. 
.1.3.6.1.4.1.11.2.14.11.15.2.83.3.4.1,HPN-ICF-EOC-COMMON-MIB::hpnicfEOCComCnuInfoEntry,,not-accessible,ifIndex,current,, The entry of the hpnicfEOCComCnuInfoTable. 
.1.3.6.1.4.1.11.2.14.11.15.2.83.3.4.1.1,HPN-ICF-EOC-COMMON-MIB::hpnicfEOCComCnuHardwareVersion,OCTET,read-only,,current,, EOC CNU's hardware version. If the object length is zero, it means the version is unknown. 
.1.3.6.1.4.1.11.2.14.11.15.2.83.3.4.1.2,HPN-ICF-EOC-COMMON-MIB::hpnicfEOCComCnuPCBVersion,OCTET,read-only,,current,, EOC CNU's PCB version. 
.1.3.6.1.4.1.11.2.14.11.15.2.83.3.4.1.3,HPN-ICF-EOC-COMMON-MIB::hpnicfEOCComCnuLinkState,INTEGER,read-only,,current,physicaldown(1):linkdown(2):linkup(3):loopback(4), The cable port's link state. The physicaldown(1) state indicates that the CNU is not powered on. The linkdown(2) state indicates that the CNU is powered on, but registers fail. The linkup(3) state indicates that the CNU is powered on, and registers successful. The loopback(4) state indecates that the CNU is powered on and registers successful, but loopback has detected. 
.1.3.6.1.4.1.11.2.14.11.15.2.83.3.4.1.4,HPN-ICF-EOC-COMMON-MIB::hpnicfEOCComCnuAttenuation,Integer32,read-only,,current,, The cnu's average attenuation. 
.1.3.6.1.4.1.11.2.14.11.15.2.83.3.4.1.5,HPN-ICF-EOC-COMMON-MIB::hpnicfEOCComCnuSoftwareVersion,OCTET,read-only,,current,, EOC CNU's software version. If the object length is zero, it means the version is unknown. 
.1.3.6.1.4.1.11.2.14.11.15.2.83.3.4.1.6,HPN-ICF-EOC-COMMON-MIB::hpnicfEOCComCnuTxRate,Integer32,read-only,,current,, The cnu's capability of tx speed in unit of 1Mbps. 
.1.3.6.1.4.1.11.2.14.11.15.2.83.3.4.1.7,HPN-ICF-EOC-COMMON-MIB::hpnicfEOCComCnuRxRate,Integer32,read-only,,current,, The cnu's capability of rx speed in unit of 1Mbps. 
.1.3.6.1.4.1.11.2.14.11.15.2.83.3.4.1.8,HPN-ICF-EOC-COMMON-MIB::hpnicfEOCComCnuTxRateDrop,Integer32,read-only,,current,, The cnu's capability droping of tx speed from it's history max value in unit of %. 
.1.3.6.1.4.1.11.2.14.11.15.2.83.3.4.1.9,HPN-ICF-EOC-COMMON-MIB::hpnicfEOCComCnuRxRateDrop,Integer32,read-only,,current,, The cnu's capability droping of rx speed from it's history max value in unit of %. 
.1.3.6.1.4.1.11.2.14.11.15.2.83.3.5,HPN-ICF-EOC-COMMON-MIB::hpnicfEOCComCnuBandWidthTable,,not-accessible,,current,, Set bandwidth parameters. 
.1.3.6.1.4.1.11.2.14.11.15.2.83.3.5.1,HPN-ICF-EOC-COMMON-MIB::hpnicfEOCComCnuBandWidthEntry,,not-accessible,ifIndex,current,, The entry of table hpnicfEOCComCnuBandWidthTable. It is a pre-configuration. 
.1.3.6.1.4.1.11.2.14.11.15.2.83.3.5.1.1,HPN-ICF-EOC-COMMON-MIB::hpnicfEOCComCnuMaxDownBW,Integer32,read-write,,current,, Maximum bandwidth allowed for the CNU, measured in Kbit/s. 
.1.3.6.1.4.1.11.2.14.11.15.2.83.3.5.1.2,HPN-ICF-EOC-COMMON-MIB::hpnicfEOCComCnuSlaHighPriBW,Integer32,read-write,,current,, High priority bandwidth - measured in Kbit/s. The value of this object should be the multiple of the value of hpnicfEOCComCnuMaxUpBW. The high priority bandwidth should not be larger than the maximum bandwidth. 
.1.3.6.1.4.1.11.2.14.11.15.2.83.3.5.1.3,HPN-ICF-EOC-COMMON-MIB::hpnicfEOCComCnuMaxUpBW,Integer32,read-write,,current,, Total bandwidth - measured in Kbit/s. The value of this object should be the multiple of the value of hpnicfEOCComCnuSlaHighPriBW. The total bandwidth should be larger than the high priority bandwidth. 
.1.3.6.1.4.1.11.2.14.11.15.2.83.4,HPN-ICF-EOC-COMMON-MIB::hpnicfEOCComUniMan,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.2.83.4.1,HPN-ICF-EOC-COMMON-MIB::hpnicfEOCComUniManTable,,not-accessible,,current,, This table defines several user network interface(UNI) system parameters. 
.1.3.6.1.4.1.11.2.14.11.15.2.83.4.1.1,HPN-ICF-EOC-COMMON-MIB::hpnicfEOCComUniManEntry,,not-accessible,ifIndex:hpnicfEOCUniIndex,current,, The entry of hpnicfEOCComUniManTable. 
.1.3.6.1.4.1.11.2.14.11.15.2.83.4.1.1.1,HPN-ICF-EOC-COMMON-MIB::hpnicfEOCUniIndex,Unsigned32,not-accessible,,current,, The index value which uniquely identifies the FE(Fast Ethernet) interface of the CNU. 
.1.3.6.1.4.1.11.2.14.11.15.2.83.4.1.1.2,HPN-ICF-EOC-COMMON-MIB::hpnicfEOCComUniDescr,OCTET,read-only,,current,, A textual string containing information about the interface. This string should include the name of the manufacturer, the product name and the version of the interface hardware and software. 
.1.3.6.1.4.1.11.2.14.11.15.2.83.4.1.1.3,HPN-ICF-EOC-COMMON-MIB::hpnicfEOCComUniStatus,INTEGER,read-write,,current,up(1):down(2):testing(3), The desired state of the user network interface. When a managed system initializes, all user network interfaces start with down state. The testing state indicates that no operational packets can be passed. As a result of either explicit management action or per configuration information retained by the managed system, hpnicfEOCComUniStatus is then changed to either the up or testing states (or remains in the down state). 
.1.3.6.1.4.1.11.2.14.11.15.2.83.4.1.1.4,HPN-ICF-EOC-COMMON-MIB::hpnicfEOCComUniSpeed,INTEGER,read-write,,current,auto(1):s10M(10):s100M(100), User network interface speed. 
.1.3.6.1.4.1.11.2.14.11.15.2.83.4.1.1.5,HPN-ICF-EOC-COMMON-MIB::hpnicfEOCComUniDuplex,INTEGER,read-write,,current,full(1):half(2):auto(3), User network interface mode. 
.1.3.6.1.4.1.11.2.14.11.15.2.83.4.1.1.6,HPN-ICF-EOC-COMMON-MIB::hpnicfEOCComUniCurrentSpeed,Gauge32,read-only,,current,, An estimate of the interface's current bandwidth in bits per second. For interfaces which do not vary in bandwidth or for those where no accurate estimation can be made, this object should contain the nominal bandwidth. If the bandwidth of the interface is greater than the maximum value reportable by this object then this object should report its maximum value (4,294,967,295). For a sub-layer which has no concept of bandwidth, this object should be zero. 
.1.3.6.1.4.1.11.2.14.11.15.2.83.4.1.1.7,HPN-ICF-EOC-COMMON-MIB::hpnicfEOCComUniCurrentDuplex,INTEGER,read-only,,current,full(1):half(2):unknown(3), The current mode of operation of the MAC entity. 'unknown' indicates that the current duplex mode could not be determined. Management control of the duplex mode is accomplished through the MAU MIB. When an interface does not support autonegotiation, or when autonegotiation is not enabled, the duplex mode is controlled using ifMauDefaultType. When autonegotiation is supported and enabled, duplex mode is controlled using ifMauAutoNegAdvertisedBits. In either case, the currently operating duplex mode is reflected both in this object and in ifMauType. Note that this object provides redundant information with ifMauType. Normally, redundant objects are discouraged. However, in this instance, it allows a management application to determine the duplex status of an interface without having to know every possible value of ifMauType. This was felt to be sufficiently valuable to justify the redundancy. 
.1.3.6.1.4.1.11.2.14.11.15.2.83.4.1.1.8,HPN-ICF-EOC-COMMON-MIB::hpnicfEOCComUniMdi,INTEGER,read-write,,current,mdi-ii(1):mdi-x(2):mdi-auto(3),Type of the line connected to UNI interface: mdi-ii(straight-through cable), mdi-x (crossover cable), mdi-auto (auto-sensing).
.1.3.6.1.4.1.11.2.14.11.15.2.83.4.1.1.9,HPN-ICF-EOC-COMMON-MIB::hpnicfEOCComUniFlowControl,INTEGER,read-write,,current,true(1):false(2),Flow control status. true(1) - Flow control status enable. false(2) - Flow control status disable.
.1.3.6.1.4.1.11.2.14.11.15.2.83.4.1.1.10,HPN-ICF-EOC-COMMON-MIB::hpnicfEOCComUniCountReset,INTEGER,read-write,,current,reset(1),Reset the counter which is about packets of the interface, then the counter will change to zero. There is no sense in reading this object.
.1.3.6.1.4.1.11.2.14.11.15.2.83.4.1.1.11,HPN-ICF-EOC-COMMON-MIB::hpnicfEOCComUniAlias,OCTET,read-write,,current,, This object is an 'alias' name for the interface as specified by a network manager, and provides a non- volatile 'handle' for the interface. On the first instantiation of an interface, the value of hpnicfEOCComUniAlias associated with that interface is the zero-length string. As and when a value is written into an instance of hpnicfEOCComUniAlias through a network management set operation, then the agent must retain the supplied value in the hpnicfEOCComUniAlias instance associated with the same interface for as long as that interface remains instantiated, including across all re- initializations/reboots of the network management system, including those which result in a change of the interface's ifIndex and hpnicfEOCUniIndex value. An example of the value which a network manager might store in this object for a WAN interface is the (Telco's) circuit number/identifier of the interface. Some agents may support write-access only for interfaces having particular values of hpnicfEOCComUniType. An agent which supports write access to this object is required to keep the value in non-volatile storage, but it may limit the length of new values depending on how much storage is already occupied by the current values for other interfaces. 
.1.3.6.1.4.1.11.2.14.11.15.2.83.4.1.1.12,HPN-ICF-EOC-COMMON-MIB::hpnicfEOCComUniType,INTEGER,read-only,,current,other(1):regular1822(2):hdh1822(3):ddnX25(4):rfc877x25(5):ethernetCsmacd(6):iso88023Csmacd(7):iso88024TokenBus(8):iso88025TokenRing(9):iso88026Man(10):starLan(11):proteon10Mbit(12):proteon80Mbit(13):hyperchannel(14):fddi(15):lapb(16):sdlc(17):ds1(18):e1(19):basicISDN(20):primaryISDN(21):propPointToPointSerial(22):ppp(23):softwareLoopback(24):eon(25):ethernet3Mbit(26):nsip(27):slip(28):ultra(29):ds3(30):sip(31):frameRelay(32):rs232(33):para(34):arcnet(35):arcnetPlus(36):atm(37):miox25(38):sonet(39):x25ple(40):iso88022llc(41):localTalk(42):smdsDxi(43):frameRelayService(44):v35(45):hssi(46):hippi(47):modem(48):aal5(49):sonetPath(50):sonetVT(51):smdsIcip(52):propVirtual(53):propMultiplexor(54):ieee80212(55):fibreChannel(56):hippiInterface(57):frameRelayInterconnect(58):aflane8023(59):aflane8025(60):cctEmul(61):fastEther(62):isdn(63):v11(64):v36(65):g703at64k(66):g703at2mb(67):qllc(68):fastEtherFX(69):channel(70):ieee80211(71):ibm370parChan(72):escon(73):dlsw(74):isdns(75):isdnu(76):lapd(77):ipSwitch(78):rsrb(79):atmLogical(80):ds0(81):ds0Bundle(82):bsc(83):async(84):cnr(85):iso88025Dtr(86):eplrs(87):arap(88):propCnls(89):hostPad(90):termPad(91):frameRelayMPI(92):x213(93):adsl(94):radsl(95):sdsl(96):vdsl(97):iso88025CRFPInt(98):myrinet(99):voiceEM(100):voiceFXO(101):voiceFXS(102):voiceEncap(103):voiceOverIp(104):atmDxi(105):atmFuni(106):atmIma(107):pppMultilinkBundle(108):ipOverCdlc(109):ipOverClaw(110):stackToStack(111):virtualIpAddress(112):mpc(113):ipOverAtm(114):iso88025Fiber(115):tdlc(116):gigabitEthernet(117):hdlc(118):lapf(119):v37(120):x25mlp(121):x25huntGroup(122):transpHdlc(123):interleave(124):fast(125):ip(126):docsCableMaclayer(127):docsCableDownstream(128):docsCableUpstream(129):a12MppSwitch(130):tunnel(131):coffee(132):ces(133):atmSubInterface(134):l2vlan(135):l3ipvlan(136):l3ipxvlan(137):digitalPowerline(138):mediaMailOverIp(139):dtm(140):dcn(141):ipForward(142):msdsl(143):ieee1394(144):if-gsn(145):dvbRccMacLayer(146):dvbRccDownstream(147):dvbRccUpstream(148):atmVirtual(149):mplsTunnel(150):srp(151):voiceOverAtm(152):voiceOverFrameRelay(153):idsl(154):compositeLink(155):ss7SigLink(156):propWirelessP2P(157):frForward(158):rfc1483(159):usb(160):ieee8023adLag(161):bgppolicyaccounting(162):frf16MfrBundle(163):h323Gatekeeper(164):h323Proxy(165):mpls(166):mfSigLink(167):hdsl2(168):shdsl(169):ds1FDL(170):pos(171):dvbAsiIn(172):dvbAsiOut(173):plc(174):nfas(175):tr008(176):gr303RDT(177):gr303IDT(178):isup(179):propDocsWirelessMaclayer(180):propDocsWirelessDownstream(181):propDocsWirelessUpstream(182):hiperlan2(183):propBWAp2Mp(184):sonetOverheadChannel(185):digitalWrapperOverheadChannel(186):aal2(187):radioMAC(188):atmRadio(189):imt(190):mvl(191):reachDSL(192):frDlciEndPt(193):atmVciEndPt(194):opticalChannel(195):opticalTransport(196):propAtm(197):voiceOverCable(198):infiniband(199):teLink(200):q2931(201):virtualTg(202):sipTg(203):sipSig(204):docsCableUpstreamChannel(205):econet(206):pon155(207):pon622(208):bridge(209):linegroup(210):voiceEMFGD(211):voiceFGDEANA(212):voiceDID(213):mpegTransport(214):sixToFour(215):gtp(216):pdnEtherLoop1(217):pdnEtherLoop2(218):opticalChannelGroup(219):homepna(220):gfp(221):ciscoISLvlan(222):actelisMetaLOOP(223):fcipLink(224):rpr(225):qam(226):lmp(227):cblVectaStar(228):docsCableMCmtsDownstream(229):adsl2(230):macSecControlledIF(231):macSecUncontrolledIF(232):aviciOpticalEther(233):atmbond(234):voiceFGDOS(235):mocaVersion1(236):ieee80216WMAN(237):adsl2plus(238):dvbRcsMacLayer(239):dvbTdm(240):dvbRcsTdma(241):x86Laps(242):wwanPP(243):wwanPP2(244):voiceEBS(245):ifPwType(246):ilan(247):pip(248):aluELP(249):gpon(250):vdsl2(251):capwapDot11Profile(252):capwapDot11Bss(253):capwapWtpVirtualRadio(254):bits(255):docsCableUpstreamRfPort(256):cableDownstreamRfPort(257):vmwareVirtualNic(258):ieee802154(259):otnOdu(260):otnOtu(261):ifVfiType(262):g9981(263):g9982(264):g9983(265):aluEpon(266):aluEponOnu(267):aluEponPhysicalUni(268):aluEponLogicalLink(269):aluGponOnu(270):aluGponPhysicalUni(271):vmwareNicTeam(272):docsOfdmDownstream(277):docsOfdmaUpstream(278):gfast(279):sdci(280):xboxWireless(281):fastdsl(282):docsCableScte55d1FwdOob(283):docsCableScte55d1RetOob(284):docsCableScte55d2DsOob(285):docsCableScte55d2UsOob(286):docsCableNdf(287):docsCableNdr(288):ptm(289):ghn(290):otnOtsi(291):otnOtuc(292):otnOduc(293):otnOtsig(294):microwaveCarrierTermination(295):microwaveRadioLinkTerminal(296), The type of interface. Additional values for hpnicfEOCComUniType are assigned by the Internet Assigned Numbers Authority(IANA), through updating the syntax of the IANAifType textual convention. 
.1.3.6.1.4.1.11.2.14.11.15.2.83.4.1.1.13,HPN-ICF-EOC-COMMON-MIB::hpnicfEOCComUniVLANType,INTEGER,read-write,,current,vLANTrunk(1):access(2):hybrid(3):fabric(4),port vlan types. hybrid (3) port can carry multiple VLANs. If fabric function is supported, fabric(4) means the port is a fabric port.
.1.3.6.1.4.1.11.2.14.11.15.2.83.4.1.1.14,HPN-ICF-EOC-COMMON-MIB::hpnicfEOCComUniPvid,Integer32,read-write,,current,, The PVID, the VLAN ID assigned to untagged frames or Priority-Tagged frames received on this port. 
.1.3.6.1.4.1.11.2.14.11.15.2.83.4.1.1.15,HPN-ICF-EOC-COMMON-MIB::hpnicfEOCComUniVlanTag,INTEGER,read-write,,current,tagged(1):untagged(2), VLAN is set tagged or untagged. 
.1.3.6.1.4.1.11.2.14.11.15.2.83.4.1.1.16,HPN-ICF-EOC-COMMON-MIB::hpnicfEOCComUniPriority,Integer32,read-write,,current,, The default ingress User Priority for this port. This only has effect on media, such as Ethernet, that do not support native User Priority. 
.1.3.6.1.4.1.11.2.14.11.15.2.83.4.1.1.17,HPN-ICF-EOC-COMMON-MIB::hpnicfEOCComUniUpLineRate,Unsigned32,read-write,,current,, The max speed upload in units of 1,000 bits per second on this interface. The value should between 0 and 100Mbps. If the value is 0, it means that the upload speed is only restricted by the physical line. 
.1.3.6.1.4.1.11.2.14.11.15.2.83.4.1.1.18,HPN-ICF-EOC-COMMON-MIB::hpnicfEOCComUniDownLineRate,Unsigned32,read-write,,current,, The max speed download in units of 1,000 bits per second on this interface. The value should between 0 and 100Mbps. If the value is 0, it means that the download speed is only restricted by the physical line. 
.1.3.6.1.4.1.11.2.14.11.15.2.83.4.1.1.19,HPN-ICF-EOC-COMMON-MIB::hpnicfEOCComUniAdminStatus,INTEGER,read-write,,current,up(1):down(2), Control if open or close the UNI. If choose up(1), means the UNI is opened and packets can pass it. If choose down(2), means the UNI is closed and all packets will be discard. 
.1.3.6.1.4.1.11.2.14.11.15.2.83.4.2,HPN-ICF-EOC-COMMON-MIB::hpnicfEOCComUniCountTable,,not-accessible,,current,,A list of interface counter about frames entries.
.1.3.6.1.4.1.11.2.14.11.15.2.83.4.2.1,HPN-ICF-EOC-COMMON-MIB::hpnicfEOCComUniCountEntry,,not-accessible,ifIndex:hpnicfEOCUniIndex,current,,An entry containing management information applicable to a particular interface.
.1.3.6.1.4.1.11.2.14.11.15.2.83.4.2.1.1,HPN-ICF-EOC-COMMON-MIB::hpnicfEOCUniInPkts,Unsigned32,read-only,,current,,The total number of packets (including bad packets, broadcast packets, and multicast packets) received.
.1.3.6.1.4.1.11.2.14.11.15.2.83.4.2.1.2,HPN-ICF-EOC-COMMON-MIB::hpnicfEOCUniInUPkts,Unsigned32,read-only,,current,,The total number of good packets received that are directed to the unicast address. Note that this does not include multicast and broadcast packets.
.1.3.6.1.4.1.11.2.14.11.15.2.83.4.2.1.3,HPN-ICF-EOC-COMMON-MIB::hpnicfEOCUniInBPkts,Unsigned32,read-only,,current,,The total number of good packets received that are directed to the broadcast address. Note that this does not include multicast packets.
.1.3.6.1.4.1.11.2.14.11.15.2.83.4.2.1.4,HPN-ICF-EOC-COMMON-MIB::hpnicfEOCUniInMPkts,Unsigned32,read-only,,current,,The total number of good packets received that are directed to a multicast address. Note that this number does not include packets directed to the broadcast address.
.1.3.6.1.4.1.11.2.14.11.15.2.83.4.2.1.5,HPN-ICF-EOC-COMMON-MIB::hpnicfEOCUniInPausePkts,Unsigned32,read-only,,current,,A count of MAC Control packets received on this interface by the pause(flow control) operation. This counter does not increment when the interface is in a half-duplex mode. Discontinuities in the value of this counter can occur at re-initialization of the management system.
.1.3.6.1.4.1.11.2.14.11.15.2.83.4.2.1.6,HPN-ICF-EOC-COMMON-MIB::hpnicfEOCUniInTotalErrors,Unsigned32,read-only,,current,,Total count of the error packets received on this interface.
.1.3.6.1.4.1.11.2.14.11.15.2.83.4.2.1.7,HPN-ICF-EOC-COMMON-MIB::hpnicfEOCUniInCRCErrs,Unsigned32,read-only,,current,,The total number of packets received that had a length (excluding framing bits, but including FCS octets) of between 64 and 1518 octets, inclusive, but had either a bad Frame Check Sequence (FCS) with an integral number of octets (FCS Error) or a bad FCS with a non-integral number of octets (Alignment Error).
.1.3.6.1.4.1.11.2.14.11.15.2.83.4.2.1.8,HPN-ICF-EOC-COMMON-MIB::hpnicfEOCUniInUndersizePkts,Unsigned32,read-only,,current,,The total number of packets received that are less than 64 octets long (excluding framing bits, but including FCS octets) and are otherwise well formed.
.1.3.6.1.4.1.11.2.14.11.15.2.83.4.2.1.9,HPN-ICF-EOC-COMMON-MIB::hpnicfEOCUniInOversizePkts,Unsigned32,read-only,,current,,The total number of packets received that are longer than 1518 octets (excluding framing bits, but including FCS octets) and are otherwise well formed.
.1.3.6.1.4.1.11.2.14.11.15.2.83.4.2.1.10,HPN-ICF-EOC-COMMON-MIB::hpnicfEOCUniInErrorbyOther,Unsigned32,read-only,,current,,The total number of other error packets received on this interface.
.1.3.6.1.4.1.11.2.14.11.15.2.83.4.2.1.11,HPN-ICF-EOC-COMMON-MIB::hpnicfEOCUniInOctets,Unsigned32,read-only,,current,,The total number of octets received on this interface.
.1.3.6.1.4.1.11.2.14.11.15.2.83.4.2.1.12,HPN-ICF-EOC-COMMON-MIB::hpnicfEOCUniOutPkts,Unsigned32,read-only,,current,,The total number of packets (including bad packets, broadcast packets, and multicast packets) sent.
.1.3.6.1.4.1.11.2.14.11.15.2.83.4.2.1.13,HPN-ICF-EOC-COMMON-MIB::hpnicfEOCUniOutUPkts,Unsigned32,read-only,,current,,The total number of good packets sent that are directed to the unicast address. Note that this does not include multicast and broadcast packets.
.1.3.6.1.4.1.11.2.14.11.15.2.83.4.2.1.14,HPN-ICF-EOC-COMMON-MIB::hpnicfEOCUniOutBPkts,Unsigned32,read-only,,current,,The total number of good packets sent that are directed to the broadcast address. Note that this does not include multicast packets.
.1.3.6.1.4.1.11.2.14.11.15.2.83.4.2.1.15,HPN-ICF-EOC-COMMON-MIB::hpnicfEOCUniOutMPkts,Unsigned32,read-only,,current,,The total number of good packets sent that are directed to a multicast address. Note that this number does not include packets directed to the broadcast address.
.1.3.6.1.4.1.11.2.14.11.15.2.83.4.2.1.16,HPN-ICF-EOC-COMMON-MIB::hpnicfEOCUniOutPausePkts,Unsigned32,read-only,,current,,The total number of MAC control packets sent on this interface by the pause operation. This counter does not increment when the interface is in a half-duplex mode. Discontinuities in the value of this counter can occur at re-initialization of the management system.
.1.3.6.1.4.1.11.2.14.11.15.2.83.4.2.1.17,HPN-ICF-EOC-COMMON-MIB::hpnicfEOCUniOutTotalErrors,Unsigned32,read-only,,current,,The total number of error packets sent on this interface.
.1.3.6.1.4.1.11.2.14.11.15.2.83.4.2.1.18,HPN-ICF-EOC-COMMON-MIB::hpnicfEOCUniOutCollisions,Unsigned32,read-only,,current,,The best estimate of the total number of collisions on this Ethernet segment. The value returned will depend on the location of the RMON probe. Section 8.2.1.3 (10BASE-5) and section 10.3.1.3 (10BASE-2) of IEEE standard 802.3 states that a station must detect a collision, in the receive mode, if three or more stations are transmitting simultaneously. A repeater port must detect a collision when two or more stations are transmitting simultaneously. Thus a probe placed on a repeater port could record more collisions than a probe connected to a station on the same segment could. Probe location plays a much smaller role when considering 10BASE-T. 14.2.1.4 (10BASE-T) of IEEE standard 802.3 defines a collision as the simultaneous presence of signals on the DO and RD circuits (transmitting and receiving at the same time). A 10BASE-T station can only detect collisions when it is transmitting. Thus probes placed on a station and a repeater, should report the same number of collisions. Note also that an RMON probe inside a repeater should ideally report collisions between the repeater and one or more other hosts (transmit collisions as defined by IEEE 802.3k) plus receiver collisions observed on any coax segments to which the repeater is connected.
.1.3.6.1.4.1.11.2.14.11.15.2.83.4.2.1.19,HPN-ICF-EOC-COMMON-MIB::hpnicfEOCUniOutDelayExceedDsds,Unsigned32,read-only,,current,,The number of packets discarded by this port due to excessive transit delay through the bridge. It is incremented by both transparent and source route bridges.
.1.3.6.1.4.1.11.2.14.11.15.2.83.4.2.1.20,HPN-ICF-EOC-COMMON-MIB::hpnicfEOCUniOutErrorbyOther,Unsigned32,read-only,,current,,The total number of other error packets sent on this interface. Other error packets means the error packets out of collision packets and excessive delayed packets.
.1.3.6.1.4.1.11.2.14.11.15.2.83.4.2.1.21,HPN-ICF-EOC-COMMON-MIB::hpnicfEOCUniOutDroppedFrames,Unsigned32,read-only,,current,,The total number of frames dropped because of buffer failure.
.1.3.6.1.4.1.11.2.14.11.15.2.83.4.2.1.22,HPN-ICF-EOC-COMMON-MIB::hpnicfEOCUniOutOctets,Unsigned32,read-only,,current,,The total number of octets transmitted out of the interface.
.1.3.6.1.4.1.11.2.14.11.15.2.83.5,HPN-ICF-EOC-COMMON-MIB::hpnicfEOCCommonTrap,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.2.83.5.0,HPN-ICF-EOC-COMMON-MIB::hpnicfEOCTrapPrefix,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.2.83.5.0.1,HPN-ICF-EOC-COMMON-MIB::hpnicfEOCCnuRegExcessTrap,,,,,, A hpnicfEOCCnuRegExcessTrap notification is sent when the number of registered CNUs exceeds the limit. 
.1.3.6.1.4.1.11.2.14.11.15.2.83.5.0.2,HPN-ICF-EOC-COMMON-MIB::hpnicfEOCCnuRegExcessRecoverTrap,,,,,, A hpnicfEOCCnuRegExcessRecoverTrap notification is sent when hpnicfEOCCnuRegExcessTrap is detected and then recoverd. 
.1.3.6.1.4.1.11.2.14.11.15.2.83.5.0.3,HPN-ICF-EOC-COMMON-MIB::hpnicfEOCCnuRegSuccTrap,,,,,, A hpnicfEOCCnuRegSuccTrap notification is sent when a CNU registers successful. 
.1.3.6.1.4.1.11.2.14.11.15.2.83.5.0.4,HPN-ICF-EOC-COMMON-MIB::hpnicfEOCCnuOffLineTrap,,,,,, A hpnicfEOCCnuOffLineTrap notification is sent when a CNU offline. 
.1.3.6.1.4.1.11.2.14.11.15.2.83.5.0.5,HPN-ICF-EOC-COMMON-MIB::hpnicfEOCCnuLinkupTrap,,,,,, A hpnicfEOCCnuLinkupTrap notification is sent when a CNU linkup. 
.1.3.6.1.4.1.11.2.14.11.15.2.83.5.0.6,HPN-ICF-EOC-COMMON-MIB::hpnicfEOCOamDisconnectTrap,,,,,, A hpnicfEOCOamDisconnectionTrap notification is sent when LLID's OAM link is disconnected. 
.1.3.6.1.4.1.11.2.14.11.15.2.83.5.0.7,HPN-ICF-EOC-COMMON-MIB::hpnicfEOCOamDisconnectRecoverTrap,,,,,, A hpnicfEOCOamDisconnectionRecoverTrap notification is sent when LLID's OAM link is disconnected and then connected. 
.1.3.6.1.4.1.11.2.14.11.15.2.83.5.0.8,HPN-ICF-EOC-COMMON-MIB::hpnicfEOCBandwidthNotEnoughTrap,,,,,, Bandwidth is not enough, cnu can not bind now. 
.1.3.6.1.4.1.11.2.14.11.15.2.83.5.0.9,HPN-ICF-EOC-COMMON-MIB::hpnicfEOCCnuAttenuationTrap,,,,,, A hpnicfHPEOCCnuAttenuationTrap notification is sent when a CNU's attenuation is changing. 
.1.3.6.1.4.1.11.2.14.11.15.2.83.5.0.10,HPN-ICF-EOC-COMMON-MIB::hpnicfEOCCnuRegFailTrap,,,,,, A hpnicfEOCCnuRegFailTrap notification is sent when a CNU registers fail. 
.1.3.6.1.4.1.11.2.14.11.15.2.83.5.0.11,HPN-ICF-EOC-COMMON-MIB::hpnicfEOCCLTCablePortErrorTrap,,,,,, A hpnicfEOCCLTCablePortErrorTrap notification is sent when the hardware of cable port occurs error or CLT's vlan is configged error. 
.1.3.6.1.4.1.11.2.14.11.15.2.83.5.0.12,HPN-ICF-EOC-COMMON-MIB::hpnicfEOCCLTCablePortErrReTrap,,,,,, A hpnicfEOCCLTCablePortErrReTrap notification is sent when cable port error and then recovered. 
.1.3.6.1.4.1.11.2.14.11.15.2.83.5.0.13,HPN-ICF-EOC-COMMON-MIB::hpnicfEOCCnuTxRateDropTrap,,,,,, A hpnicfEOCCnuTxRateDropTrap notification is sent when cable port rate of TX capability drop exceeded threshold. 
.1.3.6.1.4.1.11.2.14.11.15.2.83.5.0.14,HPN-ICF-EOC-COMMON-MIB::hpnicfEOCCnuTxRateDropRecoverTrap,,,,,, A hpnicfEOCCnuTxRateDropRecoverTrap notification is sent when cable port rate of TX capability recover from the recent rate-drop trap. 
.1.3.6.1.4.1.11.2.14.11.15.2.83.5.0.15,HPN-ICF-EOC-COMMON-MIB::hpnicfEOCCnuRxRateDropTrap,,,,,, A hpnicfEOCCnuRxRateDropTrap notification is sent when cable port rate of RX capability drop exceeded threshold. 
.1.3.6.1.4.1.11.2.14.11.15.2.83.5.0.16,HPN-ICF-EOC-COMMON-MIB::hpnicfEOCCnuRxRateDropRecoverTrap,,,,,, A hpnicfEOCCnuRxRateDropRecoverTrap notification is sent when cable port rate of RX capability recover from the recent rate-drop trap. 
.1.3.6.1.4.1.11.2.14.11.15.2.83.5.0.17,HPN-ICF-EOC-COMMON-MIB::hpnicfEOCCnuFWDownLoadErrTrap,,,,,, A hpnicfEOCCnuFWDownLoadErrTrap notification is sent when CLT can't download CNU firmware from the server successfully. 
.1.3.6.1.4.1.11.2.14.11.15.2.83.5.0.18,HPN-ICF-EOC-COMMON-MIB::hpnicfEOCCnuFWDownLoadErrReTrap,,,,,, A hpnicfEOCCnuFWDownLoadErrReTrap notification is sent when CLT recover from the download CNU firmware error. 
.1.3.6.1.4.1.11.2.14.11.15.2.83.5.0.19,HPN-ICF-EOC-COMMON-MIB::hpnicfEOCCnuDeviceTypeErrTrap,,,,,, A hpnicfEOCCnuDeviceTypeErrTrap notification is sent when the online CNU doesn't match the type which user defined earlier. 
.1.3.6.1.4.1.11.2.14.11.15.2.83.5.0.20,HPN-ICF-EOC-COMMON-MIB::hpnicfEOCCnuDeviceTypeErrReTrap,,,,,, A hpnicfEOCCnuDeviceTypeErrReTrap notification is sent when the online CNU doesn't match the type which user defined earlier and then recover. 
.1.3.6.1.4.1.11.2.14.11.15.2.83.5.0.21,HPN-ICF-EOC-COMMON-MIB::hpnicfEOCCnuAutoUpdateErrTrap,,,,,, A hpnicfEOCCnuAutoUpdateErrTrap notification is sent when the online CNU doesn't auto update successfully. 
.1.3.6.1.4.1.11.2.14.11.15.2.83.5.0.22,HPN-ICF-EOC-COMMON-MIB::hpnicfEOCCnuAutoUpdateSuccTrap,,,,,, A hpnicfEOCCnuAutoUpdateSuccTrap notification is sent when the online CNU auto update successfully. 
.1.3.6.1.4.1.11.2.14.11.15.2.83.5.0.23,HPN-ICF-EOC-COMMON-MIB::hpnicfEOCLoopbackDetectTrap,,,,,, A hpnicfEOCLoopbackDetectTrap notification is sent when the loopback between the ethernet ports of CNU or CLT is found. 
.1.3.6.1.4.1.11.2.14.11.15.2.83.5.0.24,HPN-ICF-EOC-COMMON-MIB::hpnicfEOCLoopbackRecoverTrap,,,,,, A hpnicfEOCLoopbackRecoverTrap notification is sent when the loopback between the ethernet ports of CNU or CLT is recover. 
.1.3.6.1.4.1.11.2.14.11.15.2.83.6,HPN-ICF-EOC-COMMON-MIB::hpnicfEOCComOnLineCnuMan,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.2.83.6.1,HPN-ICF-EOC-COMMON-MIB::hpnicfEOCComCnuTypeTable,,not-accessible,,current,, This table defines the description of cnu typ. 
.1.3.6.1.4.1.11.2.14.11.15.2.83.6.1.1,HPN-ICF-EOC-COMMON-MIB::hpnicfEOCComCnuTypeEntry,,not-accessible,hpnicfEOCComCnuTypeIdx,current,, The entry of the table hpnicfEOCComCnuTypeTable. 
.1.3.6.1.4.1.11.2.14.11.15.2.83.6.1.1.1,HPN-ICF-EOC-COMMON-MIB::hpnicfEOCComCnuTypeIdx,Unsigned32,not-accessible,,current,, A unique value for each cnu types. Its value ranges between 1 and the value of cny typess. 
.1.3.6.1.4.1.11.2.14.11.15.2.83.6.1.1.2,HPN-ICF-EOC-COMMON-MIB::hpnicfEOCComCnuDescripton,OCTET,read-only,,current,, The description for unique cnu types. 
.1.3.6.1.4.1.11.2.14.11.15.2.83.6.2,HPN-ICF-EOC-COMMON-MIB::hpnicfEOCComCnuNumTable,,not-accessible,,current,, This table defines the number of cnu registered in variable types of the CLT . 
.1.3.6.1.4.1.11.2.14.11.15.2.83.6.2.1,HPN-ICF-EOC-COMMON-MIB::hpnicfEOCComCnuNumEntry,,not-accessible,ifIndex:hpnicfEOCComCnuTypeIdx,current,, The entry of the table hpnicfEOCComCnuNumTable. 
.1.3.6.1.4.1.11.2.14.11.15.2.83.6.2.1.1,HPN-ICF-EOC-COMMON-MIB::hpnicfEOCComCnuNumber,Integer32,read-only,,current,, The number of special type of cnu that has been registerd in clt. 
.1.3.6.1.4.1.11.2.14.11.15.2.84,HPN-ICF-OID-MIB::hpnicfHPEOC,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.2.84.1,HPN-ICF-HPEOC-MIB::hpnicfHPEOCSystem,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.2.84.1.1,HPN-ICF-HPEOC-MIB::hpnicfHPEOCCltVlanType,INTEGER,read-write,,current,ieee8021q(1):portbased(2), Control EOC CLT's VLAN type, ieee8021q : 802.1q VLAN mode, portbased : portbased VLAN mode. 
.1.3.6.1.4.1.11.2.14.11.15.2.84.1.2,HPN-ICF-HPEOC-MIB::hpnicfHPEOCCltVlanManTable,,not-accessible,,current,, This table implements the management of CLT(Coax Line Terminal) VLAN. 
.1.3.6.1.4.1.11.2.14.11.15.2.84.1.2.1,HPN-ICF-HPEOC-MIB::hpnicfHPEOCCltVlanManEntry,,not-accessible,ifIndex,current,, The entry of the table hpnicfHPEOCCltVlanManTable. 
.1.3.6.1.4.1.11.2.14.11.15.2.84.1.2.1.1,HPN-ICF-HPEOC-MIB::hpnicfHPEOCCltEthPortType,INTEGER,read-write,,current,normal(1):debug(2), Control CLT ethernet ports' type, normal : port which used for normal translation, debug : port which used for debug. 
.1.3.6.1.4.1.11.2.14.11.15.2.84.1.3,HPN-ICF-HPEOC-MIB::hpnicfHPEOCCltSysManTable,,not-accessible,,current,, This table implements the management of CLT(Coax Line Terminal). 
.1.3.6.1.4.1.11.2.14.11.15.2.84.1.3.1,HPN-ICF-HPEOC-MIB::hpnicfHPEOCCltSysManEntry,,not-accessible,ifIndex,current,, The entry of the table hpnicfHPEOCCltSysManTable. 
.1.3.6.1.4.1.11.2.14.11.15.2.84.1.3.1.1,HPN-ICF-HPEOC-MIB::hpnicfHPEOCCltDescr,OCTET,read-write,,current,, Set the description of CLT. 
.1.3.6.1.4.1.11.2.14.11.15.2.84.1.3.1.2,HPN-ICF-HPEOC-MIB::hpnicfHPEOCCltFwVersion,OCTET,read-only,,current,, EOC firmware version. If the object length is zero, it means the version is unknown. 
.1.3.6.1.4.1.11.2.14.11.15.2.84.1.3.1.3,HPN-ICF-HPEOC-MIB::hpnicfHPEOCCltLinkState,INTEGER,read-only,,current,physicaldown(1):linkdown(2):linkup(3):loopback(4), The cable port's link state. The physicaldown(1) state indicates that the CLT is not powered on. The linkdown(2) state indicates that the CLT is powered on, but registers fail. The linkup(3) state indicates that the CLT is powered on, and registers successful. The loopback(4) state indecates that the CLT is powered on and registers successful, but loopback has detected. 
.1.3.6.1.4.1.11.2.14.11.15.2.84.1.4,HPN-ICF-HPEOC-MIB::hpnicfHPEOCCnuSysManTable,,not-accessible,,current,, This table implements the management of CNUs. 
.1.3.6.1.4.1.11.2.14.11.15.2.84.1.4.1,HPN-ICF-HPEOC-MIB::hpnicfHPEOCCnuSysManEntry,,not-accessible,ifIndex,current,, The entry of the table hpnicfHPEOCCnuSysManTable. 
.1.3.6.1.4.1.11.2.14.11.15.2.84.1.4.1.1,HPN-ICF-HPEOC-MIB::hpnicfHPEOCCnuBcastControl,INTEGER,read-write,,current,true(1):false(2), Broadcast storm suppression status. true(1) - Broadcast storm suppression enable. false(2) - Broadcast storm suppression disable. 
.1.3.6.1.4.1.11.2.14.11.15.2.84.1.4.1.2,HPN-ICF-HPEOC-MIB::hpnicfHPEOCCnuAnonymStatus,INTEGER,read-only,,current,true(1):false(2), Anonymity status. true(1) - the user which uses the CNU is anonymous. false(2) - the user which uses the CNU has an account. 
.1.3.6.1.4.1.11.2.14.11.15.2.84.1.4.1.3,HPN-ICF-HPEOC-MIB::hpnicfHPEOCCnuMacLimit,Unsigned32,read-write,,current,, Configure the max number of MAC address entries which can access through the CNU, it ranges from 1 to 8. Otherwise, If configure 0, the CNU won't limit the MAC address entry. If configure 0xFF, it means no MAC address entry can access the CNU. 
.1.3.6.1.4.1.11.2.14.11.15.2.84.1.5,HPN-ICF-HPEOC-MIB::hpnicfHPEOCCltAutoUpgrade,INTEGER,read-write,,current,true(1):false(2), Auto upgrade Status. true(1) - The firmware of the CNU will be auto changed by CLT. false(2)- The firmware of the CNU will not be auto changed. 
.1.3.6.1.4.1.11.2.14.11.15.2.84.1.6,HPN-ICF-HPEOC-MIB::hpnicfHPEOCOnLineCnuNumber,Integer32,read-only,,current,, The total number of the online CNU(s). 
.1.3.6.1.4.1.11.2.14.11.15.2.84.1.7,HPN-ICF-HPEOC-MIB::hpnicfHPEOCCpuMacAddress,OCTET,read-only,,current,, EOC CPU's MAC address. 
.1.3.6.1.4.1.11.2.14.11.15.2.84.1.8,HPN-ICF-HPEOC-MIB::hpnicfHPEOCOffLineCnuNumber,Integer32,read-only,,current,, The total number of the offline CNU(s). 
.1.3.6.1.4.1.11.2.14.11.15.2.84.1.9,HPN-ICF-HPEOC-MIB::hpnicfHPEOCDownLoadCNUFWResult,OCTET,accessible-for-notify,,current,, Download CNU firmware result. 
.1.3.6.1.4.1.11.2.14.11.15.2.84.1.10,HPN-ICF-HPEOC-MIB::hpnicfHPEOCCltAutoUpgradeType,INTEGER,read-write,,current,flash(1):ftp(2):tftp(3), Type of auto upgrade status. It depends on hpnicfHPEOCCltAutoUpgrade status. flash - The CLT auto upgrade the firmware inside its flash to the CNUs. ftp - First download the firmware from FTP server to the CLT, then the CLT auto upgrade the firmware to the CNUs. tftp - First download the firmware from TFTP server to the CLT, then the CLT auto upgrade the firmware to the CNUs. 
.1.3.6.1.4.1.11.2.14.11.15.2.84.1.11,HPN-ICF-HPEOC-MIB::hpnicfHPEOCAutoUpObjects,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.2.84.1.11.1,HPN-ICF-HPEOC-MIB::hpnicfHPEOCServerAddress,IpAddress,read-write,,current,, The address of remote host acting as server for operation. The default value is 0.0.0.0 
.1.3.6.1.4.1.11.2.14.11.15.2.84.1.11.2,HPN-ICF-HPEOC-MIB::hpnicfHPEOCServerUser,OCTET,read-write,,current,, When using ftp to transfer files, the user name must be specified through this node. It contains 1 to 30 characters. 
.1.3.6.1.4.1.11.2.14.11.15.2.84.1.11.3,HPN-ICF-HPEOC-MIB::hpnicfHPEOCServerPassword,OCTET,read-write,,current,, Remote user password for copying via ftp protocol. Optionally, this object may be ignored for protocols other than ftp. It contains 1 to 31 characters. 
.1.3.6.1.4.1.11.2.14.11.15.2.84.1.12,HPN-ICF-HPEOC-MIB::hpnicfHPEOCCltLoopbackDetect,INTEGER,read-write,,current,false(0):true(1), Loopback detect Status. true(1) - The loopback detect is enabled. false(0)- The loopback detect is disabled. 
.1.3.6.1.4.1.11.2.14.11.15.2.84.1.13,HPN-ICF-HPEOC-MIB::hpnicfHPEOCTemplateEnable,INTEGER,read-write,,current,false(0):true(1), Use template for white-list cnu. true(1) - Use template is enabled. false(0)- Use template detect is disabled. 
.1.3.6.1.4.1.11.2.14.11.15.2.84.2,HPN-ICF-HPEOC-MIB::hpnicfHPEOCCableInfo,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.2.84.2.1,HPN-ICF-HPEOC-MIB::hpnicfHPEOCCableInfoTable,,not-accessible,,current,, This table defines the primary parameters of the cable information. 
.1.3.6.1.4.1.11.2.14.11.15.2.84.2.1.1,HPN-ICF-HPEOC-MIB::hpnicfHPEOCCableInfoEntry,,not-accessible,ifIndex,current,, The entry of the table hpnicfHPEOCCableInfoTable. 
.1.3.6.1.4.1.11.2.14.11.15.2.84.2.1.1.1,HPN-ICF-HPEOC-MIB::hpnicfHPEOCFECErrors,Counter64,read-only,,current,, The cable port's FEC bits errors ratio. FEC means the payload Forward Error Correction. It's a technology of controlling errors. Packets in transmission is checked by the receiver, if error occurs, the receiver will announce the sender to resend. 
.1.3.6.1.4.1.11.2.14.11.15.2.84.2.1.1.2,HPN-ICF-HPEOC-MIB::hpnicfHPEOCAvgBitsPerCarrier,Unsigned32,read-only,,current,, The cable port's average bits per carrier. 
.1.3.6.1.4.1.11.2.14.11.15.2.84.2.1.1.3,HPN-ICF-HPEOC-MIB::hpnicfHPEOCAvgSNRPerCarrier,Integer32,read-only,,current,, The cable port's signal noise ratio(SNR) bits per carrier. 
.1.3.6.1.4.1.11.2.14.11.15.2.84.2.1.1.4,HPN-ICF-HPEOC-MIB::hpnicfHPEOCAvgInPBCRCErrors,Unsigned32,read-only,,current,, The input PB CRC errors on average. 
.1.3.6.1.4.1.11.2.14.11.15.2.84.2.1.1.5,HPN-ICF-HPEOC-MIB::hpnicfHPEOCInTotalPkts,Counter64,read-only,,current,, The total number of packets(including bad packets) received on this interface. 
.1.3.6.1.4.1.11.2.14.11.15.2.84.2.1.1.6,HPN-ICF-HPEOC-MIB::hpnicfHPEOCAvgOutPower,Integer32,read-only,,current,, The cable port's power sent on average, the unit is db. 
.1.3.6.1.4.1.11.2.14.11.15.2.84.2.1.1.7,HPN-ICF-HPEOC-MIB::hpnicfHPEOCAvgOutPBCRCErrors,Unsigned32,read-only,,current,, The cable port's physical block(PB) cyclic redundancy check(CRC) errors sent on average. 
.1.3.6.1.4.1.11.2.14.11.15.2.84.2.1.1.8,HPN-ICF-HPEOC-MIB::hpnicfHPEOCOutTotalPkts,Counter64,read-only,,current,, The total count of the packets(including bad packets) sent on this interface. 
.1.3.6.1.4.1.11.2.14.11.15.2.84.2.2,HPN-ICF-HPEOC-MIB::hpnicfHPEOCBitPerSymbolTable,,not-accessible,,current,, This table defines the bits per symbol parameters of the cable line. 
.1.3.6.1.4.1.11.2.14.11.15.2.84.2.2.1,HPN-ICF-HPEOC-MIB::hpnicfHPEOCBitPerSymbolEntry,,not-accessible,ifIndex:hpnicfHPEOCBitPerSymbolIndex,current,, The entry of the table hpnicfHPEOCBitPerSymbolTable. 
.1.3.6.1.4.1.11.2.14.11.15.2.84.2.2.1.1,HPN-ICF-HPEOC-MIB::hpnicfHPEOCBitPerSymbolIndex,Unsigned32,not-accessible,,current,, The index of the hpnicfHPEOCBitPerSymbolTable. 
.1.3.6.1.4.1.11.2.14.11.15.2.84.2.2.1.2,HPN-ICF-HPEOC-MIB::hpnicfHPEOCBitPerSymbol,OCTET,read-only,,current,, hpnicfHPEOCBitPerSymbol returns all the bits per symbol on the fixed frequency. Each 4 bits stand for one value, all the values picking-up will make up a cable bit map. 
.1.3.6.1.4.1.11.2.14.11.15.2.84.3,HPN-ICF-HPEOC-MIB::hpnicfHPEOCTemplate,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.2.84.3.1,HPN-ICF-HPEOC-MIB::hpnicfHPEOCTemplateGlobalTable,,not-accessible,,current,, This table defines the global parameters of the Template information. 
.1.3.6.1.4.1.11.2.14.11.15.2.84.3.1.1,HPN-ICF-HPEOC-MIB::hpnicfHPEOCTemplateGlobalEntry,,not-accessible,hpnicfHPEOCTemplateIndex,current,, The entry of the table hpnicfHPEOCTemplateGlobalTable. 
.1.3.6.1.4.1.11.2.14.11.15.2.84.3.1.1.1,HPN-ICF-HPEOC-MIB::hpnicfHPEOCTemplateIndex,Integer32,read-create,,current,, The index of cable Template. 
.1.3.6.1.4.1.11.2.14.11.15.2.84.3.1.1.2,HPN-ICF-HPEOC-MIB::hpnicfHPEOCTemplateType,Integer32,read-create,,current,switch(1):gateway(2), The cable Template's type, can not change after create it. 
.1.3.6.1.4.1.11.2.14.11.15.2.84.3.1.1.3,HPN-ICF-HPEOC-MIB::hpnicfHPEOCTemplateName,OCTET,read-write,,current,, The cable Template's name, it's recommended to set it uniquely and understandably. Length: 1 to 15 characters. 
.1.3.6.1.4.1.11.2.14.11.15.2.84.3.1.1.4,HPN-ICF-HPEOC-MIB::hpnicfHPEOCTemplateDescr,OCTET,read-write,,current,, The cable Template's description. Length: 0 to 63 characters. 
.1.3.6.1.4.1.11.2.14.11.15.2.84.3.1.1.5,HPN-ICF-HPEOC-MIB::hpnicfHPEOCTemplateCnuMaxDownBW,Integer32,read-write,,current,, Maximum downstream bandwidth allowed for the CNU, measured in Kbit/s, ranges from 0 to 16384, and must be multiples of 64. 
.1.3.6.1.4.1.11.2.14.11.15.2.84.3.1.1.6,HPN-ICF-HPEOC-MIB::hpnicfHPEOCTemplateCnuMaxUpBW,Integer32,read-write,,current,, Maximum upstream bandwidth allowed for the CNU, measured in Kbit/s, ranges from 0 to 16384, and must be multiples of 64. 
.1.3.6.1.4.1.11.2.14.11.15.2.84.3.1.1.7,HPN-ICF-HPEOC-MIB::hpnicfHPEOCTemplateCnuBcastControl,INTEGER,read-write,,current,true(1):false(2), Broadcast storm suppression status. true(1) - Broadcast storm suppression enable. false(2) - Broadcast storm suppression disable. 
.1.3.6.1.4.1.11.2.14.11.15.2.84.3.1.1.8,HPN-ICF-HPEOC-MIB::hpnicfHPEOCTemplateCnuMacLimit,Unsigned32,read-write,,current,, Configure the max number of MAC address entries which can access through the CNU, it ranges from 1 to 8. Otherwise, If configure 0, the CNU won't limit the MAC address entry. If configure 0xFF, it means no MAC address entry can access the CNU. 
.1.3.6.1.4.1.11.2.14.11.15.2.84.3.1.1.9,HPN-ICF-HPEOC-MIB::hpnicfHPEOCTemplateCb201VlanEn,INTEGER,read-write,,current,true(1):false(2), Use for Cb201 cnu only. true(1) - Enable vlan insert function. false(2) - Disable vlan insert function. 
.1.3.6.1.4.1.11.2.14.11.15.2.84.3.1.1.10,HPN-ICF-HPEOC-MIB::hpnicfHPEOCTemplateRowStatus,INTEGER,read-create,,current,active(1):notInService(2):notReady(3):createAndGo(4):createAndWait(5):destroy(6), Operation status. 
.1.3.6.1.4.1.11.2.14.11.15.2.84.3.2,HPN-ICF-HPEOC-MIB::hpnicfHPEOCTemplateSwitchTable,,not-accessible,,current,, This table defines the port parameters of the switch type cnu. it's not affect on the type of gateway Template. 
.1.3.6.1.4.1.11.2.14.11.15.2.84.3.2.1,HPN-ICF-HPEOC-MIB::hpnicfHPEOCTemplateSwitchEntry,,not-accessible,hpnicfHPEOCTemplateIndex:hpnicfHPEOCTemplateUniIndex,current,, The entry of the table hpnicfHPEOCTemplateSwitchTable. 
.1.3.6.1.4.1.11.2.14.11.15.2.84.3.2.1.1,HPN-ICF-HPEOC-MIB::hpnicfHPEOCTemplateUniIndex,Integer32,not-accessible,,current,, The index value which uniquely identifies the FE interface of the CNU. 
.1.3.6.1.4.1.11.2.14.11.15.2.84.3.2.1.2,HPN-ICF-HPEOC-MIB::hpnicfHPEOCTemplateUniSpeed,INTEGER,read-write,,current,auto(1):s10M(10):s100M(100), User network interface speed. 
.1.3.6.1.4.1.11.2.14.11.15.2.84.3.2.1.3,HPN-ICF-HPEOC-MIB::hpnicfHPEOCTemplateUniDuplex,INTEGER,read-write,,current,full(1):half(2):auto(3), User network interface mode. 
.1.3.6.1.4.1.11.2.14.11.15.2.84.3.2.1.4,HPN-ICF-HPEOC-MIB::hpnicfHPEOCTemplateUniPriority,Integer32,read-write,,current,, The default ingress User Priority for this port. This only has effect on media, such as Ethernet, that do not support native User Priority. 
.1.3.6.1.4.1.11.2.14.11.15.2.84.3.2.1.5,HPN-ICF-HPEOC-MIB::hpnicfHPEOCTemplateUniFlowControl,INTEGER,read-write,,current,true(1):false(2),Flow control status. true(1) - Flow control status enable. false(2) - Flow control status disable.
.1.3.6.1.4.1.11.2.14.11.15.2.84.3.2.1.6,HPN-ICF-HPEOC-MIB::hpnicfHPEOCTemplateUniUpLineRate,Unsigned32,read-write,,current,, The max speed upload in units of 1,024 bits per second on this interface. The value should between 0 and 8Mbps. If the value is 0, it means that the upload speed is only restricted by the physical line. 
.1.3.6.1.4.1.11.2.14.11.15.2.84.3.2.1.7,HPN-ICF-HPEOC-MIB::hpnicfHPEOCTemplateUniDownLineRate,Unsigned32,read-write,,current,, The max speed download in units of 1,024 bits per second on this interface. The value should between 0 and 8Mbps. If the value is 0, it means that the download speed is only restricted by the physical line. 
.1.3.6.1.4.1.11.2.14.11.15.2.84.3.2.1.8,HPN-ICF-HPEOC-MIB::hpnicfHPEOCTemplateUniAdminStatus,INTEGER,read-write,,current,up(1):down(2), Control if open or close the UNI. If choose up(1), means the UNI is opened and packets can pass it. If choose down(2), means the UNI is closed and all packets will be discard. 
.1.3.6.1.4.1.11.2.14.11.15.2.84.3.2.1.9,HPN-ICF-HPEOC-MIB::hpnicfHPEOCTemplateUniVLANType,INTEGER,read-write,,current,access(1):Trunk(2):hybrid(3),port vlan types. hybrid (3) port can carry multiple VLANs. 
.1.3.6.1.4.1.11.2.14.11.15.2.84.3.2.1.10,HPN-ICF-HPEOC-MIB::hpnicfHPEOCTemplateUniPvid,Integer32,read-write,,current,, The PVID, the VLAN ID assigned to untagged frames or Priority-Tagged frames received on this port. 
.1.3.6.1.4.1.11.2.14.11.15.2.84.3.2.1.11,HPN-ICF-HPEOC-MIB::hpnicfHPEOCTemplateUniVlanTag,INTEGER,read-write,,current,tagged(1):untagged(2), VLAN is set tagged or untagged. 
.1.3.6.1.4.1.11.2.14.11.15.2.84.4,HPN-ICF-HPEOC-MIB::hpnicfHPEOCCnuAccess,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.2.84.4.1,HPN-ICF-HPEOC-MIB::hpnicfHPEOCCnuAccessTable,,not-accessible,,current,, This table defines the global parameters of the cnu type permitting to access. 
.1.3.6.1.4.1.11.2.14.11.15.2.84.4.1.1,HPN-ICF-HPEOC-MIB::hpnicfHPEOCCnuAccessEntry,,not-accessible,hpnicfHPEOCCnuAccessIndex,current,, The entry of the table hpnicfHPEOCCnuAccessTable. 
.1.3.6.1.4.1.11.2.14.11.15.2.84.4.1.1.1,HPN-ICF-HPEOC-MIB::hpnicfHPEOCCnuAccessIndex,Integer32,read-create,,current,, The index value which uniquely identifies the  manuinfo of the CNU. 
.1.3.6.1.4.1.11.2.14.11.15.2.84.4.1.1.2,HPN-ICF-HPEOC-MIB::hpnicfHPEOCCnuHFID,OCTET,read-write,,current,, The Cnu's HFID. Every type Cnu has it's unique HFID. Length: 1 to 64 characters. 
.1.3.6.1.4.1.11.2.14.11.15.2.84.4.1.1.3,HPN-ICF-HPEOC-MIB::hpnicfHPEOCManuInfo,OCTET,read-write,,current,, The Cnu's manufactory infofamiont.  Length: 0 to 63 characters. 
.1.3.6.1.4.1.11.2.14.11.15.2.84.4.1.1.4,HPN-ICF-HPEOC-MIB::hpnicfHPEOCCnuType,Integer32,read-write,,current,switch(1):gateway(2), The Cnu's function type. 
.1.3.6.1.4.1.11.2.14.11.15.2.84.4.1.1.5,HPN-ICF-HPEOC-MIB::hpnicfHPEOCCnuSwitchType,Integer32,read-write,,current,rtl8306e(1):ar8236(2):mv6061(3):mv6031(4), The Cnu's switch chip type. It's useless for gataway type cnu. 
.1.3.6.1.4.1.11.2.14.11.15.2.84.4.1.1.6,HPN-ICF-HPEOC-MIB::hpnicfHPEOCCnuUniNum,Integer32,read-write,,current,, Uni number of the Cnu. It's useless for gataway type cnu. 
.1.3.6.1.4.1.11.2.14.11.15.2.84.4.1.1.7,HPN-ICF-HPEOC-MIB::hpnicfHPEOCCnuPhy2Uni,OCTET,read-write,,current,, Reflection from phy port to uni port of the cnu. It's useless for gataway type cnu. For example, phy port 0,1,2,3 is reflect to uni port 1,2,3,4, then the value of this mib is {0,1,2,3} 
.1.3.6.1.4.1.11.2.14.11.15.2.84.4.1.1.8,HPN-ICF-HPEOC-MIB::hpnicfHPEOCCnuAccessRowStatus,INTEGER,read-create,,current,active(1):notInService(2):notReady(3):createAndGo(4):createAndWait(5):destroy(6), Operation status. 
.1.3.6.1.4.1.11.2.14.11.15.2.85,HPN-ICF-OID-MIB::hpnicfAFC,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.2.85.1,HPN-ICF-AFC-MIB::hpnicfAFCLeaf,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.2.85.1.1,HPN-ICF-AFC-MIB::hpnicfDDosAttackTargetIP,IpAddress,accessible-for-notify,,current,,This shows the victim of a DDos attack. The IP Address is in the list of protected IP address.
.1.3.6.1.4.1.11.2.14.11.15.2.85.1.2,HPN-ICF-AFC-MIB::hpnicfDDosAttackType,INTEGER,accessible-for-notify,,current,land(1):smurf(2):fraggle(3):winnuke(4):synflood(5):icmpflood(6):udpflood(7):icmpredirect(8):icmpunreachable(9):tracert(11):tcpflag(12):pingofdeath(13):teardrop(14):ipfragment(15):largeicmp(18):sourceroute(19):routerecord(20):fragflood(24):scan(27):appstreamalarm(29):sessionstreamalarm(30):tcpabnormal(32):ipfragabnormal(33):tftpabnormal(34):dnsabnormal(35):httpabnormal(36):telnetabnormal(37):ftpabnormal(38):smtpabnormal(39):pop3abnormal(40):snmpabnormal(41):ackabnormal(42):cc(43):otherabnormal(1024),This shows the attack type which the victim is sufferd.
.1.3.6.1.4.1.11.2.14.11.15.2.85.1.3,HPN-ICF-AFC-MIB::hpnicfDDosAttackPolicy,OCTET,accessible-for-notify,,current,,This shows the policy name which detects the DDos Attack.
.1.3.6.1.4.1.11.2.14.11.15.2.85.1.4,HPN-ICF-AFC-MIB::hpnicfDDosAttackThreshold,Integer32,accessible-for-notify,,current,,This shows the policy threshold in the DDos Attack.
.1.3.6.1.4.1.11.2.14.11.15.2.85.1.5,HPN-ICF-AFC-MIB::hpnicfDDosAttackSpeed,Integer32,accessible-for-notify,,current,,This shows the rate of policy in the DDos Attack.
.1.3.6.1.4.1.11.2.14.11.15.2.85.2,HPN-ICF-AFC-MIB::hpnicfAFCNotify,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.2.85.2.0,HPN-ICF-AFC-MIB::hpnicfAFCNotifyPrefix,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.2.85.2.0.1,HPN-ICF-AFC-MIB::hpnicfDDosAttackStart,,,,,,This trap is sent when a DDos attack on specific IP is detected. The IP address of the victim is the first object. The exact type of the attack is the second object. The policy name which detects the attack is the third object. The threshold of the attack is the 4th object. The speed of the attack is the 5th object.
.1.3.6.1.4.1.11.2.14.11.15.2.85.2.0.2,HPN-ICF-AFC-MIB::hpnicfDDosAttackEnd,,,,,,This trap is sent when a DDos Attack end. The IP address of the victim is the very object.
.1.3.6.1.4.1.11.2.14.11.15.2.86,HPN-ICF-OID-MIB::hpnicfMultCDR,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.2.86.1,HPN-ICF-MCDR-MIB::hpnicfMultCDRCfgObject,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.2.86.1.1,HPN-ICF-MCDR-MIB::hpnicfMultCDRStatus,INTEGER,read-write,,current,enabled(1):disabled(2),Configure to enable or disable multicast CDR function.
.1.3.6.1.4.1.11.2.14.11.15.2.86.1.2,HPN-ICF-MCDR-MIB::hpnicfMultCDRReportInterval,INTEGER,read-write,,current,,Configure the multicast CDR report-interval. Unit: second.
.1.3.6.1.4.1.11.2.14.11.15.2.86.1.3,HPN-ICF-MCDR-MIB::hpnicfMultCDRCacheLimit,INTEGER,read-write,,current,,Configure the multicast CDR cache-limit.
.1.3.6.1.4.1.11.2.14.11.15.2.86.1.4,HPN-ICF-MCDR-MIB::hpnicfMultCDRRecordDelay,INTEGER,read-write,,current,,Configure the multicast CDR record-delay. Unit: second
.1.3.6.1.4.1.11.2.14.11.15.2.86.1.5,HPN-ICF-MCDR-MIB::hpnicfMultCDRRecordSend,INTEGER,read-write,,current,send(1):caching(2),Send record at once.
.1.3.6.1.4.1.11.2.14.11.15.2.86.2,HPN-ICF-MCDR-MIB::hpnicfMultUserOnlineInfoTable,,not-accessible,,current,,Multicast user online information table.
.1.3.6.1.4.1.11.2.14.11.15.2.86.2.1,HPN-ICF-MCDR-MIB::hpnicfMultUserOnlineInfoEntry,,not-accessible,ifIndex:hpnicfMultUserRecordID,current,,The entry of multicast user online information table.
.1.3.6.1.4.1.11.2.14.11.15.2.86.2.1.1,HPN-ICF-MCDR-MIB::hpnicfMultUserRecordID,Unsigned32,not-accessible,,current,,The index of online record.
.1.3.6.1.4.1.11.2.14.11.15.2.86.2.1.2,HPN-ICF-MCDR-MIB::hpnicfMultUserSubIfIndex,Unsigned32,read-only,,current,,The index of sub-interface which is active. If the value is zero, hpnicfMultUserSubIfIndex should be ignored.
.1.3.6.1.4.1.11.2.14.11.15.2.86.2.1.3,HPN-ICF-MCDR-MIB::hpnicfMultUserVlanID,Integer32,read-only,,current,,The ID of VLAN in which the user joined the multicast group.
.1.3.6.1.4.1.11.2.14.11.15.2.86.2.1.4,HPN-ICF-MCDR-MIB::hpnicfMultUserJoinGAddrType,INTEGER,read-only,,current,unknown(0):ipv4(1):ipv6(2):ipv4z(3):ipv6z(4):dns(16),Type of the multicast group IP address.
.1.3.6.1.4.1.11.2.14.11.15.2.86.2.1.5,HPN-ICF-MCDR-MIB::hpnicfMultUserJoinGAddr,OCTET,read-only,,current,,The multicast group address which the user joined.
.1.3.6.1.4.1.11.2.14.11.15.2.86.2.1.6,HPN-ICF-MCDR-MIB::hpnicfMultUserJoinSAddrType,INTEGER,read-only,,current,unknown(0):ipv4(1):ipv6(2):ipv4z(3):ipv6z(4):dns(16),Type of the multicast source IP address.
.1.3.6.1.4.1.11.2.14.11.15.2.86.2.1.7,HPN-ICF-MCDR-MIB::hpnicfMultUserJoinSAddr,OCTET,read-only,,current,,The multicast source address which the user joined. If the value is '0.0.0.0'(IPv4) or '::'(IPv6), hpnicfMultUserJoinSAddr should be ignored.
.1.3.6.1.4.1.11.2.14.11.15.2.86.2.1.8,HPN-ICF-MCDR-MIB::hpnicfMultUserStatus,INTEGER,read-only,,current,permit(1):preview(2),The current status of user. permit - user in permit status. preview - user in preview status.
.1.3.6.1.4.1.11.2.14.11.15.2.86.2.1.9,HPN-ICF-MCDR-MIB::hpnicfMultUserJoinTime,OCTET,read-only,,current,,The time when the user joined the multicast group.
.1.3.6.1.4.1.11.2.14.11.15.2.86.2.1.10,HPN-ICF-MCDR-MIB::hpnicfMultUserPreviewTimes,Unsigned32,read-only,,current,,The times of multicast preview which the user joined. If hpnicfMultUserStatus is not preview, hpnicfMultUserPreviewTimes should be ignored.
.1.3.6.1.4.1.11.2.14.11.15.2.86.2.1.11,HPN-ICF-MCDR-MIB::hpnicfMultUserPreviewRemain,Unsigned32,read-only,,current,,The remanent time slice of multicast preview which the user joined. If hpnicfMultUserStatus is not preview, hpnicfMultUserPreviewRemain should be ignored.
.1.3.6.1.4.1.11.2.14.11.15.2.87,HPN-ICF-OID-MIB::hpnicfMACInformation,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.2.87.1,HPN-ICF-MAC-INFORMATION-MIB::hpnicfMACInformationObjects,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.2.87.1.1,HPN-ICF-MAC-INFORMATION-MIB::hpnicfMACInformationMibGlobal,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.2.87.1.1.1,HPN-ICF-MAC-INFORMATION-MIB::hpnicfMACInformationEnabled,INTEGER,read-write,,current,enabled(1):disabled(2),The value is a global setting. The feature will not work until the value is set to enabled(1). If the value is set to disabled(2), the feature will stop working even there are interfaces that have been enabled the feature.
.1.3.6.1.4.1.11.2.14.11.15.2.87.1.1.2,HPN-ICF-MAC-INFORMATION-MIB::hpnicfMACInformationcSendInterval,Unsigned32,read-write,,current,,The maximum interval that the device generate syslogs or traps. The unit is second.
.1.3.6.1.4.1.11.2.14.11.15.2.87.1.1.3,HPN-ICF-MAC-INFORMATION-MIB::hpnicfMACInformationLearntMACNum,Counter32,read-only,,current,,The number of MAC addresses that learnt by the device since the hpnicfMACInformationEnabled is set to enabled(1) and hpnicfMACLearntEnable is set to enabled(1) at least on one interface. If the hpnicfMACInformationEnabled is set to disabled(2), the object will always return 0.
.1.3.6.1.4.1.11.2.14.11.15.2.87.1.1.4,HPN-ICF-MAC-INFORMATION-MIB::hpnicfMACInformationRemovedMACNum,Counter32,read-only,,current,,The number of MAC addresses that removed by the device since the hpnicfMACInformationEnabled is set to enabled(1) and hpnicfMACRemovedEnable is set to enabled(1) at least on one interface. If the hpnicfMACInformationEnabled is set to disabled(2), the object will always return 0.
.1.3.6.1.4.1.11.2.14.11.15.2.87.1.1.5,HPN-ICF-MAC-INFORMATION-MIB::hpnicfMACInformationTrapSendNum,Counter32,read-only,,current,,The number of traps that have been generated. This object is valid only when the hpnicfMACInfomationWorkMode is set to trap(1). If the hpnicfMACInfomationWorkMode is set to syslog(2), the object will always return 0.
.1.3.6.1.4.1.11.2.14.11.15.2.87.1.1.6,HPN-ICF-MAC-INFORMATION-MIB::hpnicfMACInformationSyslogSendNum,Counter32,read-only,,current,,The number of syslogs that have been generated. This object is valid only when the hpnicfMACInfomationWorkMode is set to syslog(2). If the hpnicfMACInfomationWorkMode is set to trap(1), the object will always return 0.
.1.3.6.1.4.1.11.2.14.11.15.2.87.1.1.7,HPN-ICF-MAC-INFORMATION-MIB::hpnicfMACInformationCacheLen,Unsigned32,read-write,,current,,The maximum queue lenth used to cache the changed MAC addresses information in the monitored device. If the value is set to 0, syslog or trap will generate as soon as there is a MAC address learnt or removed.
.1.3.6.1.4.1.11.2.14.11.15.2.87.1.1.8,HPN-ICF-MAC-INFORMATION-MIB::hpnicfMACInfomationWorkMode,INTEGER,read-write,,current,trap(1):syslog(2),The working mode of MAC Information feature. If the object is set to trap(1), the device will use trap mode to notify the MAC address information and all properties of trap interrelated is valid. If the object is set to syslog(2), the device will use syslog mode to notify the MAC address information and all properties of trap interrelated is invalid.
.1.3.6.1.4.1.11.2.14.11.15.2.87.1.2,HPN-ICF-MAC-INFORMATION-MIB::hpnicfMACInformationMIBTableTroop,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.2.87.1.2.1,HPN-ICF-MAC-INFORMATION-MIB::hpnicfMACInfomationIfTable,,not-accessible,,current,,The table is used to enable or disable the MAC Information feature on interfaces.
.1.3.6.1.4.1.11.2.14.11.15.2.87.1.2.1.1,HPN-ICF-MAC-INFORMATION-MIB::hpnicfMACInfomationIfEntry,,not-accessible,ifIndex,current,,The entry of hpnicfMACInfomationIfTable.
.1.3.6.1.4.1.11.2.14.11.15.2.87.1.2.1.1.1,HPN-ICF-MAC-INFORMATION-MIB::hpnicfMACLearntEnable,INTEGER,read-write,,current,enabled(1):disabled(2),If the object is set to enabled(1) on interface, the device will cache the MAC address information that learnt on the interface.
.1.3.6.1.4.1.11.2.14.11.15.2.87.1.2.1.1.2,HPN-ICF-MAC-INFORMATION-MIB::hpnicfMACRemovedEnable,INTEGER,read-write,,current,enabled(1):disabled(2),If the object is set to enable(1) on interface, the device will cache the MAC address information that removed on the interface.
.1.3.6.1.4.1.11.2.14.11.15.2.87.1.3,HPN-ICF-MAC-INFORMATION-MIB::hpnicfMACInformationMibTrap,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.2.87.1.3.0,HPN-ICF-MAC-INFORMATION-MIB::hpnicfMACInformationTraps,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.2.87.1.3.0.1,HPN-ICF-MAC-INFORMATION-MIB::hpnicfMACInformationChangedTrap,,,,,,When the cached number of MAC address information is reached the value specified by hpnicfMACInformationCacheLen, trap is generated and is sent to the remote monitoring device. The trap is also generated when the amount of time elapsed since the previous notification is greater than the interval value specified by hpnicfMACInformationcSendInterval and there is at least one cached MAC address information learnt or removed. The object is valid only when hpnicfMACInfomationWorkMode is set to trap(1). When the hpnicfMACInfomationWorkMode is set to syslog(2), No trap will be generated even hpnicfMACInformationEnabled is set to enabled(1) and the feature is enabled on interface.
.1.3.6.1.4.1.11.2.14.11.15.2.87.1.3.2,HPN-ICF-MAC-INFORMATION-MIB::hpnicfMACInformationTrapObjects,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.2.87.1.3.2.1,HPN-ICF-MAC-INFORMATION-MIB::hpnicfMACInfoTrapIndex,Unsigned32,accessible-for-notify,,current,,The sequence number of trap information. When it reaches the maximum value, it should be set to 1.
.1.3.6.1.4.1.11.2.14.11.15.2.87.1.3.2.2,HPN-ICF-MAC-INFORMATION-MIB::hpnicfMACInfoTrapCount,Unsigned32,accessible-for-notify,,current,,The cell number of the current trap information. The trap message may consists of more than one MAC address information. Each of the one MAC address information in one trap is called cell.
.1.3.6.1.4.1.11.2.14.11.15.2.87.1.3.2.3,HPN-ICF-MAC-INFORMATION-MIB::hpnicfMACInfoTrapMsg,OCTET,accessible-for-notify,,current,,This object is the MAC information that learnt or removed in the monitored device. It can consists of more than one MAC information in the object. This object is in the format of '<cell1><cell2>...'. Each cell consists of 12 octets in the format of '<operationType><VLAN><MAC><MACtype><ifIndex>'. <operationType> is the reason type of MAC address changed and have size of 1 octet. It only supports the following values. 1 - MAC learnt. 2 - MAC removed. <VLAN> is the vlan number that correspond to the MAC address in MAC address table and has size of 2 octet. <MAC> is the MAC address and has size of 6 octets. <MACtype> is the MAC address type and has size of 1 octet. It only supports the following values. 0 - Unknown 1 - Learnt 2 - Config dynamic 3 - Config static 4 - Blackhole 5 - Security 6 - 802.1x 7 - MAC authentication 8 - Voice VLAN 9 - Reserved <ifIndex> is the index of the interface where the MAC address is learnt or removed and has size of 2 octets.
.1.3.6.1.4.1.11.2.14.11.15.2.87.1.4,HPN-ICF-MAC-INFORMATION-MIB::hpnicfMACInformationMibTrapExt,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.2.87.1.4.0,HPN-ICF-MAC-INFORMATION-MIB::hpnicfMACInformationTrapsExt,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.2.87.1.4.0.1,HPN-ICF-MAC-INFORMATION-MIB::hpnicfMACInformationChangedTrapExt,,,,,,When the cached number of MAC address information is reached the value specified by hpnicfMACInformationCacheLen, trap is generated and is sent to the remote monitoring device. The trap is also generated when the amount of time elapsed since the previous notification is greater than the interval value specified by hpnicfMACInformationcSendInterval and there is at least one cached MAC address information learnt or removed. The object is valid only when hpnicfMACInfomationWorkMode is set to trap(1). When the hpnicfMACInfomationWorkMode is set to syslog(2), No trap will be generated even hpnicfMACInformationEnabled is set to enabled(1) and the feature is enabled on interface.
.1.3.6.1.4.1.11.2.14.11.15.2.87.1.4.0.2,HPN-ICF-MAC-INFORMATION-MIB::hpnicfMACInformationMovedTrap,,,,,,When the MAC address has been moved to another interface, trap is generated and is sent to the remote monitoring device.
.1.3.6.1.4.1.11.2.14.11.15.2.87.1.4.2,HPN-ICF-MAC-INFORMATION-MIB::hpnicfMACInformationTrapObjectsExt,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.2.87.1.4.2.1,HPN-ICF-MAC-INFORMATION-MIB::hpnicfMACInfoTrapVerExt,Unsigned32,accessible-for-notify,,current,,The version of trap information.
.1.3.6.1.4.1.11.2.14.11.15.2.87.1.4.2.2,HPN-ICF-MAC-INFORMATION-MIB::hpnicfMACInfoTrapIndexExt,Unsigned32,accessible-for-notify,,current,,The sequence number of trap information. When it reaches the maximum value, it should be set to 1.
.1.3.6.1.4.1.11.2.14.11.15.2.87.1.4.2.3,HPN-ICF-MAC-INFORMATION-MIB::hpnicfMACInfoTrapCountExt,Unsigned32,accessible-for-notify,,current,,The cell number of the current trap information. The trap message may consists of more than one MAC address information. Each of the one MAC address information in one trap is called cell.
.1.3.6.1.4.1.11.2.14.11.15.2.87.1.4.2.4,HPN-ICF-MAC-INFORMATION-MIB::hpnicfMACInfoTrapMsgExt,OCTET,accessible-for-notify,,current,,This object is the MAC information that learnt or removed in the monitored device. It can consists of more than one MAC information in the object. This object is in the format of '<cell1><cell2>...'. Each cell consists of 14 octets in the format of '<operationType><VLAN><MAC><MACtype><ifIndex>'. <operationType> is the reason type of MAC address changed and have size of 1 octet. It only supports the following values. 1 - MAC learnt. 2 - MAC removed. <VLAN> is the vlan number that correspond to the MAC address in MAC address table and has size of 2 octet. <MAC> is the MAC address and has size of 6 octets. <MACtype> is the MAC address type and has size of 1 octet. It only supports the following values. 0 - Unknown 1 - Learnt 2 - Config dynamic 3 - Config static 4 - Blackhole 5 - Security 6 - 802.1x 7 - MAC authentication 8 - Voice VLAN 9 - Reserved <ifIndex> is the index of the interface where the MAC address is learnt or removed and has size of 4 octets.
.1.3.6.1.4.1.11.2.14.11.15.2.87.1.4.2.5,HPN-ICF-MAC-INFORMATION-MIB::hpnicfMACInfoTrapMsgMovedAddress,OCTET,accessible-for-notify,,current,,The MAC address that is moved between interfaces.
.1.3.6.1.4.1.11.2.14.11.15.2.87.1.4.2.6,HPN-ICF-MAC-INFORMATION-MIB::hpnicfMACInfoTrapMsgMovedVlan,Integer32,accessible-for-notify,,current,,The VLAN number in which the MAC address is moved.
.1.3.6.1.4.1.11.2.14.11.15.2.87.1.4.2.7,HPN-ICF-MAC-INFORMATION-MIB::hpnicfMACInfoTrapMsgMovedFromIf,Integer32,accessible-for-notify,,current,,The index of the interface from which the MAC address is moved.
.1.3.6.1.4.1.11.2.14.11.15.2.87.1.4.2.8,HPN-ICF-MAC-INFORMATION-MIB::hpnicfMACInfoTrapMsgMovedToIf,Integer32,accessible-for-notify,,current,,The index of the interface to which the MAC address is moved.
.1.3.6.1.4.1.11.2.14.11.15.2.87.1.4.2.9,HPN-ICF-MAC-INFORMATION-MIB::hpnicfMACInfoTrapMsgMovedCount,Counter32,accessible-for-notify,,current,,The times for which the MAC address has been moved between the interfaces.
.1.3.6.1.4.1.11.2.14.11.15.2.88,HPN-ICF-OID-MIB::hpnicfFireWall,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.2.88.1,HPN-ICF-FIREWALL-MIB::hpnicfFirewallobject,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.2.88.1.1,HPN-ICF-FIREWALL-MIB::hpnicfFirewallSpecs,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.2.88.1.1.1,HPN-ICF-FIREWALL-MIB::hpnicfFWMaxConnNum,Unsigned32,read-only,,current,,Max connection number of system.
.1.3.6.1.4.1.11.2.14.11.15.2.88.1.2,HPN-ICF-FIREWALL-MIB::hpnicfFirewallGlobalStats,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.2.88.1.2.1,HPN-ICF-FIREWALL-MIB::hpnicfFWConnNumCurr,Gauge32,read-only,,current,,The number of connections that currently exist.
.1.3.6.1.4.1.11.2.14.11.15.2.88.1.2.2,HPN-ICF-FIREWALL-MIB::hpnicfFWConnRate,Gauge32,read-only,,current,,Connection establishment rate.
.1.3.6.1.4.1.11.2.14.11.15.2.89,HPN-ICF-OID-MIB::hpnicfDSP,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.2.89.1,HPN-ICF-DSP-MIB::hpnicfVPMStatusTable,,not-accessible,,current,,The table contains status parameters of VPM(Voice Process Module) card.
.1.3.6.1.4.1.11.2.14.11.15.2.89.1.1,HPN-ICF-DSP-MIB::hpnicfVPMStatusEntry,,not-accessible,hpnicfVPMIndex,current,,The entry of VPM status table.
.1.3.6.1.4.1.11.2.14.11.15.2.89.1.1.1,HPN-ICF-DSP-MIB::hpnicfVPMIndex,Integer32,accessible-for-notify,,current,,The index for this entry. The sequence of VPM card in the chassis is from the top to bottom.
.1.3.6.1.4.1.11.2.14.11.15.2.89.1.1.2,HPN-ICF-DSP-MIB::hpnicfVPMEnPhysicalIndex,Integer32,read-only,,current,,The object corresponds to PhysicalIndex in the chassis.
.1.3.6.1.4.1.11.2.14.11.15.2.89.1.1.3,HPN-ICF-DSP-MIB::hpnicfVPMState,INTEGER,read-only,,current,normal(1):warning(2):fatal(3):offLine(4),The object indicates the current state of VPM card being monitored. normal(1) - VPM card in normal condition. warning(2) - VPM card has some problem and need attention. fatal(3) - VPM card is not functional. offLine(4) - VPM card is in off-line maintenance state.
.1.3.6.1.4.1.11.2.14.11.15.2.89.1.1.4,HPN-ICF-DSP-MIB::hpnicfVPMResourceUtilization,Integer32,read-only,,current,,The object indicates the percentage of current DSP resource utilization of the VPM card. The utilization is a ratio of number of busy DSP resources (for handling calls, transcoding, voice compression,...) to the total available DSP resources.
.1.3.6.1.4.1.11.2.14.11.15.2.89.1.1.5,HPN-ICF-DSP-MIB::hpnicfVPMHiWaterUtilization,Integer32,read-only,,current,,The object indicates the highest percentage of DSP resource utilization of the VPM card that have been occured.
.1.3.6.1.4.1.11.2.14.11.15.2.89.1.1.6,HPN-ICF-DSP-MIB::hpnicfVPMMaxChannel,Integer32,read-only,,current,,The maximum number of channels can be supported in each VPM card.
.1.3.6.1.4.1.11.2.14.11.15.2.89.2,HPN-ICF-DSP-MIB::hpnicfDSPStatusTable,,not-accessible,,current,,The table contains status parameters of DSP(Digital Signal Processing) card.
.1.3.6.1.4.1.11.2.14.11.15.2.89.2.1,HPN-ICF-DSP-MIB::hpnicfDSPStatusEntry,,not-accessible,hpnicfDSPIndex,current,,The entry of DSP status table.
.1.3.6.1.4.1.11.2.14.11.15.2.89.2.1.1,HPN-ICF-DSP-MIB::hpnicfDSPIndex,Integer32,accessible-for-notify,,current,,The index for this entry. DSP is fixed on VPM card or chassis card. The sequence of DSP in the VPM card or chassis card is from right to left.
.1.3.6.1.4.1.11.2.14.11.15.2.89.2.1.2,HPN-ICF-DSP-MIB::hpnicfDSPVPMIndex,Integer32,read-only,,current,,The object corresponds to VPMIndex in the chassis. If value of this object is non-zero, it is the index of VPM card.(DSP is in this VPM card.) If value of this object is 0, then the DSP is fixed in the chassis card.
.1.3.6.1.4.1.11.2.14.11.15.2.89.2.1.3,HPN-ICF-DSP-MIB::hpnicfDSPEnPhysicalIndex,Integer32,read-only,,current,,The object corresponds to PhysicalIndex in the chassis.
.1.3.6.1.4.1.11.2.14.11.15.2.89.2.1.4,HPN-ICF-DSP-MIB::hpnicfDSPResetTime,TimeTicks,read-only,,current,,The value of sysUpTime from the last DSP reset occurred.
.1.3.6.1.4.1.11.2.14.11.15.2.89.2.1.5,HPN-ICF-DSP-MIB::hpnicfDSPMaxChannel,Integer32,read-only,,current,,The maximum number of channels can be supported in each DSP. The value is chosen in an implementation-dependent manner by the DSP functionality.
.1.3.6.1.4.1.11.2.14.11.15.2.89.2.1.6,HPN-ICF-DSP-MIB::hpnicfDSPState,INTEGER,read-only,,current,normal(1):fatal(3):offLine(4),The object indicates the current state of DSP being monitored. normal(1) - DSP in normal condition. fatal(3) - DSP is not functional. offLine(4) - DSP is in off-line maintenance state.
.1.3.6.1.4.1.11.2.14.11.15.2.89.2.1.7,HPN-ICF-DSP-MIB::hpnicfDSPInUseChannel,Integer32,read-only,,current,,The number of channels that are reserved for serving calls. The value is incremented when the DSP channel is reserved for call setup and is decremented after the DSP channel is free due to call disconnection.
.1.3.6.1.4.1.11.2.14.11.15.2.89.3,HPN-ICF-DSP-MIB::hpnicfDSPTrap,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.2.89.3.0,HPN-ICF-DSP-MIB::hpnicfDSPTrapPrex,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.2.89.3.0.1,HPN-ICF-DSP-MIB::hpnicfVPMStateChange,,,,,,This trap is sent when VPM state changes.
.1.3.6.1.4.1.11.2.14.11.15.2.89.3.0.2,HPN-ICF-DSP-MIB::hpnicfDSPStateChange,,,,,,This trap is sent when DSP state changes.
.1.3.6.1.4.1.11.2.14.11.15.2.90,HPN-ICF-OID-MIB::hpnicfNetMan,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.2.90.1,HPN-ICF-NET-MAN-MIB::hpnicfNMConfigObjects,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.2.90.2,HPN-ICF-NET-MAN-MIB::hpnicfNMMonitorObjects,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.2.90.3,HPN-ICF-NET-MAN-MIB::hpnicfNMNotify,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.2.90.3.1,HPN-ICF-NET-MAN-MIB::hpnicfNMNotifyScalarObjects,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.2.90.3.1.1,HPN-ICF-NET-MAN-MIB::hpnicfNMIpAddressType,INTEGER,accessible-for-notify,,current,unknown(0):ipv4(1):ipv6(2):ipv4z(3):ipv6z(4):dns(16),The IP address type of specified interface on the device.
.1.3.6.1.4.1.11.2.14.11.15.2.90.3.1.2,HPN-ICF-NET-MAN-MIB::hpnicfNMIpAddress,OCTET,accessible-for-notify,,current,,The IP address of specified interface on the device.
.1.3.6.1.4.1.11.2.14.11.15.2.90.3.1.3,HPN-ICF-NET-MAN-MIB::hpnicfNMCustomBuildInfo,OCTET,read-only,,current,,The customer-required information of devices, for example, OUI (Organizational Unique Identifier).
.1.3.6.1.4.1.11.2.14.11.15.2.90.3.1.4,HPN-ICF-NET-MAN-MIB::hpnicfNMSerialNum,OCTET,accessible-for-notify,,current,,The serial number used by NMS (Network Management Station) for mapping IP address and device.
.1.3.6.1.4.1.11.2.14.11.15.2.90.3.2,HPN-ICF-NET-MAN-MIB::hpnicfNMNotifyObjects,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.2.90.3.2.0,HPN-ICF-NET-MAN-MIB::hpnicfNMNotifyObjectsPrefix,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.2.90.3.2.0.1,HPN-ICF-NET-MAN-MIB::hpnicfIpAddrChangeNotify,,,,,,This notification will be generated when the IP address of active management interface is changed. The change maybe originate from NMS, DHCP server or administrator. The management interfaces are the interfaces that assigned by administrator, which can be used to manage device, but may be inactive for link fault or IP address (IPv4 or IPv6) missing. The active management interface means an active interface, the IP address of which can be used for network management. This notification announces useful management IP address change. So it is triggered by significative IP address change. Suppose that two management interfaces on a device, Interface-A and Interface-B. Initially both interfaces are down and assigned no IP address. Configure Interface-A as the primary monitored interface, Interface-B as the secondary. Significative IP address change in following cases: 1. If Interface-A is assigned an IP address primarily, and it is linking up, then Interface-B will be ignored. A notification will be triggered, appending IP address of Interface-A. 2. If Interface-B is assigned an IP address primarily, and it is linking up, then Interface-A will be ignored. A notification will be triggered, appending IP address of Interface-B. 3. If IP address of that interface, which had its IP address announced to NMS, is changed since last notification triggered, then another notification will be sent to NMS. 4. Suppore that Interface-A was linked up and assigned an IP address primarily. If for some unknown reason, Interface-A is down or loses IP address, and Interface-B is assigned an IP address which is different with that announced to NMS before, then a notification will be triggered, appending the new IP address that Interface-B assigned. 5. A notification appending new IP address that Interface-A assigned will be triggered, if 4 occurs to Interface-B.
.1.3.6.1.4.1.11.2.14.11.15.2.90.4,HPN-ICF-NET-MAN-MIB::hpnicfNetManConformance,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.2.90.4.1,HPN-ICF-NET-MAN-MIB::hpnicfNetManCompliances,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.2.90.4.1.1,HPN-ICF-NET-MAN-MIB::hpnicfNetManCompliance,,,,,,The statement of compliance for those implementing the network management MIB.
.1.3.6.1.4.1.11.2.14.11.15.2.90.4.2,HPN-ICF-NET-MAN-MIB::hpnicfNetManGroups,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.2.90.4.2.1,HPN-ICF-NET-MAN-MIB::hpnicfNMMonitorGroup,,,,,,A collection of objects in net management monitor group.
.1.3.6.1.4.1.11.2.14.11.15.2.90.4.2.2,HPN-ICF-NET-MAN-MIB::hpnicfNMNotificationGroup,,,,,,A collection of objects in net management notification group.
.1.3.6.1.4.1.11.2.14.11.15.2.91,HPN-ICF-OID-MIB::hpnicfStack,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.2.91.1,HPN-ICF-STACK-MIB::hpnicfStackGlobalConfig,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.2.91.1.1,HPN-ICF-STACK-MIB::hpnicfStackMaxMember,Integer32,read-only,,current,,The maximum number of members in a stack.
.1.3.6.1.4.1.11.2.14.11.15.2.91.1.2,HPN-ICF-STACK-MIB::hpnicfStackMemberNum,Integer32,read-only,,current,,The number of members currently in a stack.
.1.3.6.1.4.1.11.2.14.11.15.2.91.1.3,HPN-ICF-STACK-MIB::hpnicfStackMaxConfigPriority,Integer32,read-only,,current,,The highest priority that can be configured for a member in a stack.
.1.3.6.1.4.1.11.2.14.11.15.2.91.1.4,HPN-ICF-STACK-MIB::hpnicfStackAutoUpdate,INTEGER,read-write,,current,disabled(1):enabled(2),The function for automatically updating the image from the master to a device that is attempting to join the stack. When a new device tries to join a stack, STM verifies the image consistency between the joining device and the master. If the joining device uses a different image version than the master, the function updates the joining device with the image of the master. When this function is disabled, the new device can not join the stack if it uses a different software version than the master. disabled: disable auto update function enabled: enable auto update function
.1.3.6.1.4.1.11.2.14.11.15.2.91.1.5,HPN-ICF-STACK-MIB::hpnicfStackMacPersistence,INTEGER,read-write,,current,notPersist(1):persistForSixMin(2):persistForever(3),The mode of bridge MAC address persistence. When a stack starts, the bridge MAC address of the master is used as that of the stack. When the master leaves the stack, the bridge MAC address of the stack changes depending on the mode of bridge MAC address persistence. notPersist: The bridge MAC address of the new master is used as that of the stack immediately. persistForSixMin: The original bridge MAC address will be reserved for six minutes. In this period, if the master that has left rejoins the stack, the bridge MAC address of the stack will not change. If the old master does not rejoin the stack within this period, the bridge MAC address of the new master will be used as that of the stack. persistForever: Whether the master leaves or not, the bridge MAC address of the stack will never change.
.1.3.6.1.4.1.11.2.14.11.15.2.91.1.6,HPN-ICF-STACK-MIB::hpnicfStackLinkDelayInterval,Integer32,read-write,,current,,Delay for stack ports to report a link down event. If the link comes up before the delay timer expires, the stack port will not report the link down event. If the link is not recovered before the delay timer expires, the stack port will report the change. If the delay is set to 0, the stack ports will report a link down event without delay. 0: no delay 1-30000(ms): delay time
.1.3.6.1.4.1.11.2.14.11.15.2.91.1.7,HPN-ICF-STACK-MIB::hpnicfStackTopology,INTEGER,read-only,,current,chainConn(1):ringConn(2),Stack topology. chainConn: daisy-chain connection ringConn: ring connection
.1.3.6.1.4.1.11.2.14.11.15.2.91.2,HPN-ICF-STACK-MIB::hpnicfStackDeviceConfigTable,,not-accessible,,current,,This table contains objects to manage device information in a stack.
.1.3.6.1.4.1.11.2.14.11.15.2.91.2.1,HPN-ICF-STACK-MIB::hpnicfStackDeviceConfigEntry,,not-accessible,entPhysicalIndex,current,,This table contains objects to manage device information in a stack.
.1.3.6.1.4.1.11.2.14.11.15.2.91.2.1.1,HPN-ICF-STACK-MIB::hpnicfStackMemberID,Integer32,read-only,,current,,The member ID of the device in a stack.
.1.3.6.1.4.1.11.2.14.11.15.2.91.2.1.2,HPN-ICF-STACK-MIB::hpnicfStackConfigMemberID,Integer32,read-write,,current,,The configured member ID of the device. The valid value ranges from 1 to the value in hpnicfStackMaxMember. The configured member ID will take effect at a reboot if it is unique within the stack.
.1.3.6.1.4.1.11.2.14.11.15.2.91.2.1.3,HPN-ICF-STACK-MIB::hpnicfStackPriority,Integer32,read-write,,current,,The priority of a device in the stack. The valid value ranges from 1 to the value in hpnicfStackMaxConfigPriority.
.1.3.6.1.4.1.11.2.14.11.15.2.91.2.1.4,HPN-ICF-STACK-MIB::hpnicfStackPortNum,Integer32,read-only,,current,,The number of stack ports enabled in a device.
.1.3.6.1.4.1.11.2.14.11.15.2.91.2.1.5,HPN-ICF-STACK-MIB::hpnicfStackPortMaxNum,Integer32,read-only,,current,,The maximum number of stack ports in a device.
.1.3.6.1.4.1.11.2.14.11.15.2.91.3,HPN-ICF-STACK-MIB::hpnicfStackBoardConfigTable,,not-accessible,,current,,This table contains objects to manage MPU information for a stack.
.1.3.6.1.4.1.11.2.14.11.15.2.91.3.1,HPN-ICF-STACK-MIB::hpnicfStackBoardConfigEntry,,not-accessible,entPhysicalIndex,current,,This table contains objects to manage MPU information for a stack.
.1.3.6.1.4.1.11.2.14.11.15.2.91.3.1.1,HPN-ICF-STACK-MIB::hpnicfStackBoardRole,INTEGER,read-only,,current,slave(1):master(2):loading(3):other(4),The role of the MPU in a stack. slave: Standby MPU master: Master MPU loading: Standby MPU is loading the software image from the master. other: other
.1.3.6.1.4.1.11.2.14.11.15.2.91.3.1.2,HPN-ICF-STACK-MIB::hpnicfStackBoardBelongtoMember,Integer32,read-only,,current,,Member ID of the device that holds the current board.
.1.3.6.1.4.1.11.2.14.11.15.2.91.4,HPN-ICF-STACK-MIB::hpnicfStackPortInfoTable,,not-accessible,,current,,This table contains objects to manage stack port information for IRF stacked devices.
.1.3.6.1.4.1.11.2.14.11.15.2.91.4.1,HPN-ICF-STACK-MIB::hpnicfStackPortInfoEntry,,not-accessible,hpnicfStackMemberID:hpnicfStackPortIndex,current,,This table contains objects to manage stack port information for IRF stacked devices.
.1.3.6.1.4.1.11.2.14.11.15.2.91.4.1.1,HPN-ICF-STACK-MIB::hpnicfStackPortIndex,Integer32,accessible-for-notify,,current,,The index of a stack port of the device.
.1.3.6.1.4.1.11.2.14.11.15.2.91.4.1.2,HPN-ICF-STACK-MIB::hpnicfStackPortEnable,INTEGER,read-only,,current,disabled(1):enabled(2),The status of a stack port of the device. If no physical ports are added to the stack port, its status is 'disabled'. If the stack port has physical ports, its status is 'enabled'. disabled: The stack port is disabled. enabled: The stack port is enabled.
.1.3.6.1.4.1.11.2.14.11.15.2.91.4.1.3,HPN-ICF-STACK-MIB::hpnicfStackPortStatus,INTEGER,read-only,,current,up(1):down(2):silent(3):disabled(4),The link status of a stack port on the device. up: A physical link is present on the stack port. down: No physical link is present on the stack port. silent: The link state of the stack port is up, but the port cannot transmit or receive traffic. disabled: The stack port does not contain physical links.
.1.3.6.1.4.1.11.2.14.11.15.2.91.4.1.4,HPN-ICF-STACK-MIB::hpnicfStackNeighbor,Integer32,read-only,,current,,The member ID of the stack port's neighbor. 0 means no neighbor exists.
.1.3.6.1.4.1.11.2.14.11.15.2.91.4.1.5,HPN-ICF-STACK-MIB::hpnicfStackPortForwardingPath,OCTET,read-only,,current,,List of egress member IDs on a stack port. Each member device uses the egress member ID lists to choose the outgoing stack port for known unicast frames to be sent out of other member devices. The egress member ID lists are comma separated. A zero-length string means no egress members exist. For example: In a ring stack of 1-2-3-4-5-7-1, if hpnicfStackPortForwardingPath.1.1 returns '7,5,4', IRF-port 1/1 will be the outgoing port for frames to reach members 7, 5, and 4 from member 1.
.1.3.6.1.4.1.11.2.14.11.15.2.91.5,HPN-ICF-STACK-MIB::hpnicfStackPhyPortInfoTable,,not-accessible,,current,,This table contains objects to manage information about physical ports that can be used for IRF stacking.
.1.3.6.1.4.1.11.2.14.11.15.2.91.5.1,HPN-ICF-STACK-MIB::hpnicfStackPhyPortInfoEntry,,not-accessible,entPhysicalIndex,current,,This table contains objects to manage information about physical ports that can be used for IRF stacking.
.1.3.6.1.4.1.11.2.14.11.15.2.91.5.1.1,HPN-ICF-STACK-MIB::hpnicfStackBelongtoPort,Integer32,read-write,,current,,The index of the stack port to which the physical port is added. 0 means the physical port is not added to any stack port. The value will take effect when IRF is enabled on the device.
.1.3.6.1.4.1.11.2.14.11.15.2.91.6,HPN-ICF-STACK-MIB::hpnicfStackTrap,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.2.91.6.0,HPN-ICF-STACK-MIB::hpnicfStackTrapOjbects,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.2.91.6.0.1,HPN-ICF-STACK-MIB::hpnicfStackPortLinkStatusChange,,,,,,The hpnicfStackPortLinkStatusChange trap indicates that the link status of the stack port has changed.
.1.3.6.1.4.1.11.2.14.11.15.2.91.6.0.2,HPN-ICF-STACK-MIB::hpnicfStackTopologyChange,,,,,,The hpnicfStackTopologyChange trap indicates that the topology type of the IRF stack has changed.
.1.3.6.1.4.1.11.2.14.11.15.2.91.6.0.3,HPN-ICF-STACK-MIB::hpnicfStackMadBfdChangeNormal,,,,,,The hpnicfStackMadBfdChangeNormal trap indicates that the BFD MAD function changed to the normal state.
.1.3.6.1.4.1.11.2.14.11.15.2.91.6.0.4,HPN-ICF-STACK-MIB::hpnicfStackMadBfdChangeFailure,,,,,,The hpnicfStackMadBfdChangeFailure trap indicates that the BFD MAD function changed to the failure state.
.1.3.6.1.4.1.11.2.14.11.15.2.91.6.0.5,HPN-ICF-STACK-MIB::hpnicfStackMadLacpChangeNormal,,,,,,The hpnicfStackMadLacpChangeNormal trap indicates that the LACP MAD function changed to the normal state.
.1.3.6.1.4.1.11.2.14.11.15.2.91.6.0.6,HPN-ICF-STACK-MIB::hpnicfStackMadLacpChangeFailure,,,,,,The hpnicfStackMadLacpChangeFailure trap indicates that the LACP MAD function changed to the failure state.
.1.3.6.1.4.1.11.2.14.11.15.2.92,HPN-ICF-OID-MIB::hpnicfPosa,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.2.92.1,HPN-ICF-POSA-MIB::hpnicfPosaControl,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.2.92.1.1,HPN-ICF-POSA-MIB::hpnicfPosaServerEnable,INTEGER,read-write,,current,disabled(1):enabled(2),This attribute controls the starting or stoppage of POS access function. The defalut value is disabled(1).
.1.3.6.1.4.1.11.2.14.11.15.2.92.1.2,HPN-ICF-POSA-MIB::hpnicfPosaFcmAnswerTimeout,Integer32,read-write,,current,,The maximum answer time of a POS connection through a FCM (Fast Connection Modem) interface. The answer time is the interval from the POS terminal sending request to the Router giving its reply, in units of milliseconds.
.1.3.6.1.4.1.11.2.14.11.15.2.92.1.3,HPN-ICF-POSA-MIB::hpnicfPosaFcmTradeTimeout,Integer32,read-write,,current,,The maximum time of a POS trade through a FCM interface, in units of milliseconds.
.1.3.6.1.4.1.11.2.14.11.15.2.92.1.4,HPN-ICF-POSA-MIB::hpnicfPosaFcmIdleTimeout,Integer32,read-write,,current,,The maximum idle time of a POS connection through the FCM interface, in units of seconds.
.1.3.6.1.4.1.11.2.14.11.15.2.92.1.5,HPN-ICF-POSA-MIB::hpnicfPosaSrvStateChangeTrapEnable,INTEGER,read-write,,current,true(1):false(2),This attribute controls whether the hpnicfPosaServerStatusChange trap will be sent or not.
.1.3.6.1.4.1.11.2.14.11.15.2.92.1.6,HPN-ICF-POSA-MIB::hpnicfPosaAppStateChangeTrapEnable,INTEGER,read-write,,current,true(1):false(2),This attribute controls whether the hpnicfPosaAppStateChange trap will be sent or not.
.1.3.6.1.4.1.11.2.14.11.15.2.92.1.7,HPN-ICF-POSA-MIB::hpnicfPosaTerminalHangUpTrapEnable,INTEGER,read-write,,current,true(1):false(2),This attribute controls whether the hpnicfPosaTerminalHangUp trap will be sent or not.
.1.3.6.1.4.1.11.2.14.11.15.2.92.1.8,HPN-ICF-POSA-MIB::hpnicfPosaFcmLnkNegoFailTrapEnable,INTEGER,read-write,,current,true(1):false(2),This attribute controls whether the hpnicfPosaFcmLinkNegoFailed trap will be sent or not.
.1.3.6.1.4.1.11.2.14.11.15.2.92.1.9,HPN-ICF-POSA-MIB::hpnicfPosaFcmPhyNegoFailTrapEnable,INTEGER,read-write,,current,true(1):false(2),This attribute controls whether the hpnicfPosaFcmPhyNegoFailed trap will be sent or not.
.1.3.6.1.4.1.11.2.14.11.15.2.92.1.10,HPN-ICF-POSA-MIB::hpnicfPosaTcpConnectionNumber,Integer32,read-only,,current,,The current number of TCP connections.
.1.3.6.1.4.1.11.2.14.11.15.2.92.1.11,HPN-ICF-POSA-MIB::hpnicfPosaFcmConnectionNumber,Integer32,read-only,,current,,The current number of FCM connections.
.1.3.6.1.4.1.11.2.14.11.15.2.92.1.12,HPN-ICF-POSA-MIB::hpnicfPosaTcpConnectionThreshold,Integer32,read-write,,current,,The threshold of TCP connections.
.1.3.6.1.4.1.11.2.14.11.15.2.92.1.13,HPN-ICF-POSA-MIB::hpnicfPosaFcmConnectionThreshold,Integer32,read-write,,current,,The threshold of FCM connections.
.1.3.6.1.4.1.11.2.14.11.15.2.92.1.14,HPN-ICF-POSA-MIB::hpnicfPosaTcpConnectionTrapEnable,INTEGER,read-write,,current,true(1):false(2),This attribute specifies the threshold that must be exceeded to send the hpnicfPosaTcpConnectionExceed trap.
.1.3.6.1.4.1.11.2.14.11.15.2.92.1.15,HPN-ICF-POSA-MIB::hpnicfPosaFcmConnectionTrapEnable,INTEGER,read-write,,current,true(1):false(2),This attribute specifies the threshold that must be exceeded to send the hpnicfPosaFcmConnectionExceed trap.
.1.3.6.1.4.1.11.2.14.11.15.2.92.1.16,HPN-ICF-POSA-MIB::hpnicfPosaTcpTradeLimit,Integer32,read-write,,current,,The limit of concurrent trades in one TCP connection. The value 0 means unlimited.
.1.3.6.1.4.1.11.2.14.11.15.2.92.1.17,HPN-ICF-POSA-MIB::hpnicfPosaTcpTradeTrapEnable,INTEGER,read-write,,current,true(1):false(2),This attribute specifies the limit that must be exceeded to send the hpnicfPosaTcpTradeExceed trap.
.1.3.6.1.4.1.11.2.14.11.15.2.92.1.18,HPN-ICF-POSA-MIB::hpnicfPosaTcpTradeTimeout,Integer32,read-write,,current,,The maximum interval to wait for the reply from sending the trade packet to the application server. The value 0 means wait forever.
.1.3.6.1.4.1.11.2.14.11.15.2.92.2,HPN-ICF-POSA-MIB::hpnicfPosaTables,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.2.92.2.1,HPN-ICF-POSA-MIB::hpnicfPosaAppTable,,not-accessible,,current,,This table shows the configuration information and running status of POS application.
.1.3.6.1.4.1.11.2.14.11.15.2.92.2.1.1,HPN-ICF-POSA-MIB::hpnicfPosaAppEntry,,not-accessible,hpnicfPosaAppID,current,,This table shows the configuration information and running status of POS application.
.1.3.6.1.4.1.11.2.14.11.15.2.92.2.1.1.1,HPN-ICF-POSA-MIB::hpnicfPosaAppID,Integer32,accessible-for-notify,,current,,The identification of a POS application. It ranges from 1 to 128.
.1.3.6.1.4.1.11.2.14.11.15.2.92.2.1.1.2,HPN-ICF-POSA-MIB::hpnicfPosaAppServiceType,INTEGER,read-create,,current,tcp(1):flow(2),The service type of a POS application. It means the way in which the router connects with the application server.
.1.3.6.1.4.1.11.2.14.11.15.2.92.2.1.1.3,HPN-ICF-POSA-MIB::hpnicfPosaAppIfIndex,Integer32,read-create,,current,,This attribute is the ifindex through which the router connecting with the application server, if the service type of POS application is flow(2). It is invalid if the service type is tcp(1). At preasent, it supports 5 types of interface: FCM, SERIAL, ASYNC, AM (Analog Modem) and AUX.
.1.3.6.1.4.1.11.2.14.11.15.2.92.2.1.1.4,HPN-ICF-POSA-MIB::hpnicfPosaAppMode,INTEGER,read-create,,current,normal(1):temporary(2),The work mode of a POS application.
.1.3.6.1.4.1.11.2.14.11.15.2.92.2.1.1.5,HPN-ICF-POSA-MIB::hpnicfPosaAppHostIPType,INTEGER,read-create,,current,unknown(0):ipv4(1):ipv6(2):ipv4z(3):ipv6z(4):dns(16),The IP address type of the application server. And now it must be IPV4. It is invalid if the service type is flow(2).
.1.3.6.1.4.1.11.2.14.11.15.2.92.2.1.1.6,HPN-ICF-POSA-MIB::hpnicfPosaAppHostIP,OCTET,read-create,,current,,The IP address of the application server. And now it only supports IPV4. It is invalid if the service type is flow(2).
.1.3.6.1.4.1.11.2.14.11.15.2.92.2.1.1.7,HPN-ICF-POSA-MIB::hpnicfPosaAppHostPort,Integer32,read-create,,current,,The listening port of the application server. If the information of the application server is not specified, this object will return the value 0. It is invalid if the service type is flow(2).
.1.3.6.1.4.1.11.2.14.11.15.2.92.2.1.1.8,HPN-ICF-POSA-MIB::hpnicfPosaAppRouterIPType,INTEGER,read-create,,current,unknown(0):ipv4(1):ipv6(2):ipv4z(3):ipv6z(4):dns(16),The source IP address type of the access router. Now it must be ipv4. It is invalid if the service type is flow(2).
.1.3.6.1.4.1.11.2.14.11.15.2.92.2.1.1.9,HPN-ICF-POSA-MIB::hpnicfPosaAppRouterIP,OCTET,read-create,,current,,The source IP address of access router used in connecting with application server. Now it only supports ipv4. It is invalid if the service type is flow(2).
.1.3.6.1.4.1.11.2.14.11.15.2.92.2.1.1.10,HPN-ICF-POSA-MIB::hpnicfPosaAppKeepAliveInterval,Integer32,read-create,,current,,The TCP keep alive interval of the connection between the router and the application server. In unit of seconds. The default value is 2 seconds. It is valid only when the service type is tcp(1).
.1.3.6.1.4.1.11.2.14.11.15.2.92.2.1.1.11,HPN-ICF-POSA-MIB::hpnicfPosaAppKeepAliveCount,Integer32,read-create,,current,,The maximum number of sending TCP keep alive packets. It is valid only when the service type is tcp(1).
.1.3.6.1.4.1.11.2.14.11.15.2.92.2.1.1.12,HPN-ICF-POSA-MIB::hpnicfPosaAppConnectTimeout,Integer32,read-create,,current,,The maximum interval that the router waits for the reply from application server after sending the request for establishing a TCP connection. It is invalid if the service type is flow(2).
.1.3.6.1.4.1.11.2.14.11.15.2.92.2.1.1.13,HPN-ICF-POSA-MIB::hpnicfPosaAppState,INTEGER,read-only,,current,notset(1):down(2):up(3):kept(4):linking(5):linked(6):multilink(7):blocked(8):error(9),The current running state of application server.
.1.3.6.1.4.1.11.2.14.11.15.2.92.2.1.1.14,HPN-ICF-POSA-MIB::hpnicfPosaAppRowStatus,INTEGER,read-create,,current,active(1):notInService(2):notReady(3):createAndGo(4):createAndWait(5):destroy(6),Operation status.
.1.3.6.1.4.1.11.2.14.11.15.2.92.2.1.1.15,HPN-ICF-POSA-MIB::hpnicfPosaAppName,OCTET,read-create,,current,,The description of a POS application.
.1.3.6.1.4.1.11.2.14.11.15.2.92.2.1.1.16,HPN-ICF-POSA-MIB::hpnicfPosaCallerIDTransEnable,INTEGER,read-create,,current,true(1):false(2),Enable or disable the caller-id transmission function.
.1.3.6.1.4.1.11.2.14.11.15.2.92.2.1.1.17,HPN-ICF-POSA-MIB::hpnicfPosaTpduChangeStrategy,INTEGER,read-create,,current,changeTpduSrc(1):changeTpduDest(2),Set the strategy to modify the address of the packet from terminals before delivering it to application server.
.1.3.6.1.4.1.11.2.14.11.15.2.92.2.1.1.18,HPN-ICF-POSA-MIB::hpnicfPosaBackupAppID,Integer32,read-create,,current,,Specify the backup application ID, 0 indicates not using backup application. It is invalid if the service type is flow(2).
.1.3.6.1.4.1.11.2.14.11.15.2.92.2.1.1.19,HPN-ICF-POSA-MIB::hpnicfPosaQuietTimeOut,Integer32,read-create,,current,,Specify the wait time for re-activating application server. It is invalid if the service type is flow(2).
.1.3.6.1.4.1.11.2.14.11.15.2.92.2.1.1.20,HPN-ICF-POSA-MIB::hpnicfPosaAppHello,INTEGER,read-create,,current,true(1):false(2),Specify the switch of hello packet for the application server.
.1.3.6.1.4.1.11.2.14.11.15.2.92.2.1.1.21,HPN-ICF-POSA-MIB::hpnicfPosaAppHelloInterval,Integer32,read-create,,current,,Specify the interval time in minute(s) of hello packet.
.1.3.6.1.4.1.11.2.14.11.15.2.92.2.1.1.22,HPN-ICF-POSA-MIB::hpnicfPosaAppRouterPort,Integer32,read-create,,current,,The source port of access router used in connecting with application server. 0 indicates not to specify the source port. It is valid only if the service type is tcp(1) and mode is normal(1).
.1.3.6.1.4.1.11.2.14.11.15.2.92.2.2,HPN-ICF-POSA-MIB::hpnicfPosaTerminalTable,,not-accessible,,current,,This table shows the configuration information and running status of POS terminal.
.1.3.6.1.4.1.11.2.14.11.15.2.92.2.2.1,HPN-ICF-POSA-MIB::hpnicfPosaTerminalEntry,,not-accessible,hpnicfPosaTerminalID,current,,This table shows the configuration information and running status of POS terminal.
.1.3.6.1.4.1.11.2.14.11.15.2.92.2.2.1.1,HPN-ICF-POSA-MIB::hpnicfPosaTerminalID,Integer32,accessible-for-notify,,current,,The identification of a POS terminal.
.1.3.6.1.4.1.11.2.14.11.15.2.92.2.2.1.2,HPN-ICF-POSA-MIB::hpnicfPosaTerminalAccessType,INTEGER,read-create,,current,fcm(1):flow(2):tcp(3),The access type of a POS terminal.
.1.3.6.1.4.1.11.2.14.11.15.2.92.2.2.1.3,HPN-ICF-POSA-MIB::hpnicfPosaTerminalIfIndex,Integer32,read-create,,current,,The ifindex of the interface through which connects the POS terminal and the router. It is invalid if the access type is TCP.
.1.3.6.1.4.1.11.2.14.11.15.2.92.2.2.1.4,HPN-ICF-POSA-MIB::hpnicfPosaTerminalTransAppID,Integer32,read-create,,current,,The identification of the application server to which all the packets from this POS terminal will be sent. If this object is set to 0, the destination application server to which a packet from this POS terminal will be sent is determined by its TPDU (Transport Protocol Data Unit) destination address. It is invalid if the access type is TCP.
.1.3.6.1.4.1.11.2.14.11.15.2.92.2.2.1.5,HPN-ICF-POSA-MIB::hpnicfPosaTerminalListenPort,Integer32,read-create,,current,,The listening port accepting the connection from POS terminals. It is valid only when the access type is TCP.
.1.3.6.1.4.1.11.2.14.11.15.2.92.2.2.1.6,HPN-ICF-POSA-MIB::hpnicfPosaTerminalState,INTEGER,read-only,,current,notset(1):down(2):up(3):kept(4):linking(5):linked(6):multilink(7):blocked(8):error(9),The current running status of a POS terminal.
.1.3.6.1.4.1.11.2.14.11.15.2.92.2.2.1.7,HPN-ICF-POSA-MIB::hpnicfPosaTerminalRowStatus,INTEGER,read-create,,current,active(1):notInService(2):notReady(3):createAndGo(4):createAndWait(5):destroy(6),Operation status.
.1.3.6.1.4.1.11.2.14.11.15.2.92.2.2.1.8,HPN-ICF-POSA-MIB::hpnicfPosaTerminalName,OCTET,read-create,,current,,The description of a POS terminal.
.1.3.6.1.4.1.11.2.14.11.15.2.92.2.2.1.9,HPN-ICF-POSA-MIB::hpnicfPosaTerminalCfgIfIndex,Integer32,read-only,,current,,The ifindex of the interface on which the terminal configuration is. If it is a physical interface, its value is equal to that of hpnicfPosaTerminalIfIndex.
.1.3.6.1.4.1.11.2.14.11.15.2.92.2.3,HPN-ICF-POSA-MIB::hpnicfPosaMapTable,,not-accessible,,current,,This table describe the application-mapping information.
.1.3.6.1.4.1.11.2.14.11.15.2.92.2.3.1,HPN-ICF-POSA-MIB::hpnicfPosaMapEntry,,not-accessible,hpnicfPosaMapSrcCode:hpnicfPosaMapDestCode,current,,This table describe the application-mapping information.
.1.3.6.1.4.1.11.2.14.11.15.2.92.2.3.1.1,HPN-ICF-POSA-MIB::hpnicfPosaMapDestCode,OCTET,not-accessible,,current,,The destination code of the mapping item. Generally, the destination code is a 4-character-string. If the destination address in POS packet matches the code, the packet will be deliveried to the corresponding application server. If any code can not be matched, the packet will be deliveried to the default server. A special destination code, 'default', is for default mapping item.
.1.3.6.1.4.1.11.2.14.11.15.2.92.2.3.1.2,HPN-ICF-POSA-MIB::hpnicfPosaMapAppID,Integer32,read-create,,current,,The identifier of POS application. It is the index of hpnicfPosaAppTable.
.1.3.6.1.4.1.11.2.14.11.15.2.92.2.3.1.3,HPN-ICF-POSA-MIB::hpnicfPosaMapRowStatus,INTEGER,read-create,,current,active(1):notInService(2):notReady(3):createAndGo(4):createAndWait(5):destroy(6),Operation status.
.1.3.6.1.4.1.11.2.14.11.15.2.92.2.3.1.4,HPN-ICF-POSA-MIB::hpnicfPosaMapSrcCode,OCTET,not-accessible,,current,,The source code of the mapping item. Generally, the source code is a 4-character-string. If the source address in POS packet matches the code, the packet will be deliveried to the corresponding application server. If any code can not be matched, the packet will be deliveried to the default server. A special source code, 'default', is for default mapping item.
.1.3.6.1.4.1.11.2.14.11.15.2.92.2.4,HPN-ICF-POSA-MIB::hpnicfPosaFcmStatTable,,not-accessible,,current,,This table shows the statistics information of FCM interface.
.1.3.6.1.4.1.11.2.14.11.15.2.92.2.4.1,HPN-ICF-POSA-MIB::hpnicfPosaFcmStatEntry,,not-accessible,hpnicfPosaFcmStatIfIndex,current,,This table shows the statistics information of FCM interface.
.1.3.6.1.4.1.11.2.14.11.15.2.92.2.4.1.1,HPN-ICF-POSA-MIB::hpnicfPosaFcmStatIfIndex,Integer32,not-accessible,,current,,The index of FCM interface.
.1.3.6.1.4.1.11.2.14.11.15.2.92.2.4.1.2,HPN-ICF-POSA-MIB::hpnicfPosaFcmStatTimeoutCnts,Counter32,read-only,,current,,The number of disconnections because of trade timeouts.
.1.3.6.1.4.1.11.2.14.11.15.2.92.2.4.1.3,HPN-ICF-POSA-MIB::hpnicfPosaFcmStatConnectFailCnts,Counter32,read-only,,current,,The number of connection failures because of unsuccessful negotiations.
.1.3.6.1.4.1.11.2.14.11.15.2.92.2.4.1.4,HPN-ICF-POSA-MIB::hpnicfPosaFcmStatTransCnts,Gauge32,read-only,,current,,The number of all transactions made through the interface.
.1.3.6.1.4.1.11.2.14.11.15.2.92.2.4.1.5,HPN-ICF-POSA-MIB::hpnicfPosaFcmStatTransSuccessCnts,Gauge32,read-only,,current,,The number of successful transactions made through the interface.
.1.3.6.1.4.1.11.2.14.11.15.2.92.2.4.1.6,HPN-ICF-POSA-MIB::hpnicfPosaFcmStatTransCntsClear,INTEGER,read-write,,current,true(1):false(2),Clear the number of successful transactions and all transactions.
.1.3.6.1.4.1.11.2.14.11.15.2.92.2.5,HPN-ICF-POSA-MIB::hpnicfPosaAppStatTable,,not-accessible,,current,,This table shows the statistics information of application.
.1.3.6.1.4.1.11.2.14.11.15.2.92.2.5.1,HPN-ICF-POSA-MIB::hpnicfPosaAppStatEntry,,not-accessible,hpnicfPosaAppID,current,,This table shows the statistics information of application.
.1.3.6.1.4.1.11.2.14.11.15.2.92.2.5.1.1,HPN-ICF-POSA-MIB::hpnicfPosaAppRecvPkts,Counter32,read-only,,current,,The number of packets recieved from the application server.
.1.3.6.1.4.1.11.2.14.11.15.2.92.2.5.1.2,HPN-ICF-POSA-MIB::hpnicfPosaAppSendPkts,Counter32,read-only,,current,,The number of packets sent to the application server.
.1.3.6.1.4.1.11.2.14.11.15.2.92.2.5.1.3,HPN-ICF-POSA-MIB::hpnicfPosaAppErrPkts,Counter32,read-only,,current,,The number of inbound packets that contained errors.
.1.3.6.1.4.1.11.2.14.11.15.2.92.2.5.1.4,HPN-ICF-POSA-MIB::hpnicfPosaAppDistributeErrCnts,Counter32,read-only,,current,,The number of packets that are discarded when no corresponding POS terminal can be found.
.1.3.6.1.4.1.11.2.14.11.15.2.92.2.5.1.5,HPN-ICF-POSA-MIB::hpnicfPosaAppInDiscardedPkts,Counter32,read-only,,current,,The number of inbound packets that are discarded when the incoming buffer is full.
.1.3.6.1.4.1.11.2.14.11.15.2.92.2.5.1.6,HPN-ICF-POSA-MIB::hpnicfPosaAppOutDiscardedPkts,Counter32,read-only,,current,,The number of outbound packets that are discarded because of link errors between the router and the application server.
.1.3.6.1.4.1.11.2.14.11.15.2.92.2.6,HPN-ICF-POSA-MIB::hpnicfPosaTerminalStatTable,,not-accessible,,current,,This table shows the statistics information of application.
.1.3.6.1.4.1.11.2.14.11.15.2.92.2.6.1,HPN-ICF-POSA-MIB::hpnicfPosaTerminalStatEntry,,not-accessible,hpnicfPosaTerminalID,current,,This table shows the statistics information of application.
.1.3.6.1.4.1.11.2.14.11.15.2.92.2.6.1.1,HPN-ICF-POSA-MIB::hpnicfPosaTerminalRecvPkts,Counter32,read-only,,current,,The number of packets recieved from the POS terminal.
.1.3.6.1.4.1.11.2.14.11.15.2.92.2.6.1.2,HPN-ICF-POSA-MIB::hpnicfPosaTerminalSendPkts,Counter32,read-only,,current,,The number of packets sent to the POS terminal.
.1.3.6.1.4.1.11.2.14.11.15.2.92.2.6.1.3,HPN-ICF-POSA-MIB::hpnicfPosaTerminalErrPkts,Counter32,read-only,,current,,The number of inbound packets that contained errors.
.1.3.6.1.4.1.11.2.14.11.15.2.92.2.6.1.4,HPN-ICF-POSA-MIB::hpnicfPosaTerminalMapErrCnts,Counter32,read-only,,current,,The number of packets that are discarded because of mapping errors.
.1.3.6.1.4.1.11.2.14.11.15.2.92.2.6.1.5,HPN-ICF-POSA-MIB::hpnicfPosaTerminalInDiscardedPkts,Counter32,read-only,,current,,The number of inbound packets that are discarded when the incoming buffer is full.
.1.3.6.1.4.1.11.2.14.11.15.2.92.2.6.1.6,HPN-ICF-POSA-MIB::hpnicfPosaTerminalOutDiscardedPkts,Counter32,read-only,,current,,The number of outbound packets that are discarded because of link errors between the router and the POS terminal.
.1.3.6.1.4.1.11.2.14.11.15.2.92.2.7,HPN-ICF-POSA-MIB::hpnicfPosaBatchTerminalTable,,not-accessible,,current,,The table of the configuration information relevant to a batch of POS terminals.
.1.3.6.1.4.1.11.2.14.11.15.2.92.2.7.1,HPN-ICF-POSA-MIB::hpnicfPosaBatchTerminalEntry,,not-accessible,ifIndex,current,,The configuration information relevant to a batch of POS terminals.
.1.3.6.1.4.1.11.2.14.11.15.2.92.2.7.1.1,HPN-ICF-POSA-MIB::hpnicfPosaBatchTerminalFirstID,Integer32,read-create,,current,,The first ID of the batch of POS terminals.
.1.3.6.1.4.1.11.2.14.11.15.2.92.2.7.1.2,HPN-ICF-POSA-MIB::hpnicfPosaBatchTerminalRowStatus,INTEGER,read-create,,current,active(1):notInService(2):notReady(3):createAndGo(4):createAndWait(5):destroy(6),Operation status.
.1.3.6.1.4.1.11.2.14.11.15.2.92.2.8,HPN-ICF-POSA-MIB::hpnicfPosaTcpTermStatTable,,not-accessible,,current,,This table shows the statistics information of terminal whose access type is tcp.
.1.3.6.1.4.1.11.2.14.11.15.2.92.2.8.1,HPN-ICF-POSA-MIB::hpnicfPosaTcpTermStatEntry,,not-accessible,hpnicfPosaTcpTermStatIndex,current,,This table shows the statistics information of terminal whose access type is tcp.
.1.3.6.1.4.1.11.2.14.11.15.2.92.2.8.1.1,HPN-ICF-POSA-MIB::hpnicfPosaTcpTermStatIndex,Integer32,not-accessible,,current,,The index of entity.
.1.3.6.1.4.1.11.2.14.11.15.2.92.2.8.1.2,HPN-ICF-POSA-MIB::hpnicfPosaTcpTermStatIPType,INTEGER,read-create,,current,unknown(0):ipv4(1):ipv6(2):ipv4z(3):ipv6z(4):dns(16),The type of Internet address. And now it must be ipv4.
.1.3.6.1.4.1.11.2.14.11.15.2.92.2.8.1.3,HPN-ICF-POSA-MIB::hpnicfPosaTcpTermStatIP,OCTET,read-create,,current,,The IP address or the subnet of the statistics terminal(s). When the vlaue is a subnet, the statistics of all the terminals in the subnet will be added up. And now it only supports ipv4.
.1.3.6.1.4.1.11.2.14.11.15.2.92.2.8.1.4,HPN-ICF-POSA-MIB::hpnicfPosaTcpTermStatIPMask,OCTET,read-create,,current,,The mask associated with the IP address or the subnet. And now it only supports ipv4.
.1.3.6.1.4.1.11.2.14.11.15.2.92.2.8.1.5,HPN-ICF-POSA-MIB::hpnicfPosaTcpTermRecvPkts,Counter64,read-only,,current,,The number of packets recieved from the POS terminal(s).
.1.3.6.1.4.1.11.2.14.11.15.2.92.2.8.1.6,HPN-ICF-POSA-MIB::hpnicfPosaTcpTermSendPkts,Counter64,read-only,,current,,The number of packets sent to the POS terminal(s).
.1.3.6.1.4.1.11.2.14.11.15.2.92.2.8.1.7,HPN-ICF-POSA-MIB::hpnicfPosaTcpTermErrPkts,Counter64,read-only,,current,,The number of inbound packets that contained errors.
.1.3.6.1.4.1.11.2.14.11.15.2.92.2.8.1.8,HPN-ICF-POSA-MIB::hpnicfPosaTcpTermMapErrCnts,Counter64,read-only,,current,,The number of packets that are discarded because of mapping errors.
.1.3.6.1.4.1.11.2.14.11.15.2.92.2.8.1.9,HPN-ICF-POSA-MIB::hpnicfPosaTcpTermInDiscardedPkts,Counter64,read-only,,current,,The number of inbound packets that are discarded when the incoming buffer is full.
.1.3.6.1.4.1.11.2.14.11.15.2.92.2.8.1.10,HPN-ICF-POSA-MIB::hpnicfPosaTcpTermOutDiscardedPkts,Counter64,read-only,,current,,The number of outbound packets that are discarded because of link errors between the router and the POS terminal(s).
.1.3.6.1.4.1.11.2.14.11.15.2.92.2.8.1.11,HPN-ICF-POSA-MIB::hpnicfPosaTcpTermStatRowStatus,INTEGER,read-create,,current,active(1):notInService(2):notReady(3):createAndGo(4):createAndWait(5):destroy(6),Operation status.
.1.3.6.1.4.1.11.2.14.11.15.2.92.2.9,HPN-ICF-POSA-MIB::hpnicfPosaFcmConfTable,,not-accessible,,current,,This table shows the configuration information of FCM (Fast Connection Modem) interfaces.
.1.3.6.1.4.1.11.2.14.11.15.2.92.2.9.1,HPN-ICF-POSA-MIB::hpnicfPosaFcmConfEntry,,not-accessible,ifIndex,current,,This entry shows the configuration information of FCM (Fast Connection Modem) interfaces.
.1.3.6.1.4.1.11.2.14.11.15.2.92.2.9.1.1,HPN-ICF-POSA-MIB::hpnicfPosaFcmNegoHookOff,Integer32,read-write,,current,,Delay time for hookoff.
.1.3.6.1.4.1.11.2.14.11.15.2.92.2.9.1.2,HPN-ICF-POSA-MIB::hpnicfPosaFcmNegoSilence,Integer32,read-write,,current,,Silence time for modem negotiation.
.1.3.6.1.4.1.11.2.14.11.15.2.92.2.9.1.3,HPN-ICF-POSA-MIB::hpnicfPosaFcmNegoScrmbBinary1,Integer32,read-write,,current,,Scramble-binary1 time for modem negotiation.
.1.3.6.1.4.1.11.2.14.11.15.2.92.2.9.1.4,HPN-ICF-POSA-MIB::hpnicfPosaFcmNegoUnscrmbBinary1,Integer32,read-write,,current,,Unscramble-binary1 time for modem negotiation.
.1.3.6.1.4.1.11.2.14.11.15.2.92.2.9.1.5,HPN-ICF-POSA-MIB::hpnicfPosaFcmThresholdRlsdOff,Integer32,read-write,,current,,RLSD (Received Line Signal Detect) off threshold for modem.
.1.3.6.1.4.1.11.2.14.11.15.2.92.2.9.1.6,HPN-ICF-POSA-MIB::hpnicfPosaFcmThresholdRlsdOn,Integer32,read-write,,current,,RLSD (Received Line Signal Detect) on threshold for modem.
.1.3.6.1.4.1.11.2.14.11.15.2.92.2.9.1.7,HPN-ICF-POSA-MIB::hpnicfPosaFcmThresholdTxPower,Integer32,read-write,,current,,TX power for modem.
.1.3.6.1.4.1.11.2.14.11.15.2.92.2.9.1.8,HPN-ICF-POSA-MIB::hpnicfPosaFcmThresholdAnswerTone,Integer32,read-write,,current,,Answer tone level for modem.
.1.3.6.1.4.1.11.2.14.11.15.2.92.2.10,HPN-ICF-POSA-MIB::hpnicfPosaCallerStatTable,,not-accessible,,current,,This table shows the statistics information of terminal according the caller-ID.
.1.3.6.1.4.1.11.2.14.11.15.2.92.2.10.1,HPN-ICF-POSA-MIB::hpnicfPosaCallerStatEntry,,not-accessible,hpnicfPosaCallerStatCallerID,current,,This table shows the statistics information of terminal according the caller-ID.
.1.3.6.1.4.1.11.2.14.11.15.2.92.2.10.1.1,HPN-ICF-POSA-MIB::hpnicfPosaCallerStatCallerID,OCTET,not-accessible,,current,,The caller number.
.1.3.6.1.4.1.11.2.14.11.15.2.92.2.10.1.2,HPN-ICF-POSA-MIB::hpnicfPosaCallerRecvPkts,Counter64,read-only,,current,,The number of packets recieved from the POS terminal(s).
.1.3.6.1.4.1.11.2.14.11.15.2.92.2.10.1.3,HPN-ICF-POSA-MIB::hpnicfPosaCallerSendPkts,Counter64,read-only,,current,,The number of packets sent to the POS terminal(s).
.1.3.6.1.4.1.11.2.14.11.15.2.92.2.10.1.4,HPN-ICF-POSA-MIB::hpnicfPosaCallerErrPkts,Counter64,read-only,,current,,The number of inbound packets that contained errors.
.1.3.6.1.4.1.11.2.14.11.15.2.92.2.10.1.5,HPN-ICF-POSA-MIB::hpnicfPosaCallerMapErrCnts,Counter64,read-only,,current,,The number of packets that are discarded because of mapping errors.
.1.3.6.1.4.1.11.2.14.11.15.2.92.2.10.1.6,HPN-ICF-POSA-MIB::hpnicfPosaCallerInDiscardedPkts,Counter64,read-only,,current,,The number of inbound packets that are discarded when the incoming buffer is full.
.1.3.6.1.4.1.11.2.14.11.15.2.92.2.10.1.7,HPN-ICF-POSA-MIB::hpnicfPosaCallerOutDiscardedPkts,Counter64,read-only,,current,,The number of outbound packets that are discarded because of link errors between the router and the POS terminal(s).
.1.3.6.1.4.1.11.2.14.11.15.2.92.2.10.1.8,HPN-ICF-POSA-MIB::hpnicfPosaCallerStatRowStatus,INTEGER,read-create,,current,active(1):notInService(2):notReady(3):createAndGo(4):createAndWait(5):destroy(6),Operation status.
.1.3.6.1.4.1.11.2.14.11.15.2.92.3,HPN-ICF-POSA-MIB::hpnicfPosaTrap,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.2.92.3.0,HPN-ICF-POSA-MIB::hpnicfPosaTrapPrex,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.2.92.3.0.1,HPN-ICF-POSA-MIB::hpnicfPosaServerStatusChange,,,,,,This trap is generated when the POS function is started or stopped.
.1.3.6.1.4.1.11.2.14.11.15.2.92.3.0.2,HPN-ICF-POSA-MIB::hpnicfPosaAppStateChange,,,,,,This trap is generated whenever the availability of application server changes.
.1.3.6.1.4.1.11.2.14.11.15.2.92.3.0.3,HPN-ICF-POSA-MIB::hpnicfPosaTerminalHangUp,,,,,,This trap is generated whenever the POS connection through a FCM (Fast Connection Modem) interface is hanged up by POS terminal.
.1.3.6.1.4.1.11.2.14.11.15.2.92.3.0.4,HPN-ICF-POSA-MIB::hpnicfPosaFcmLinkNegoFailed,,,,,,This trap is generated whenever the link layer negotiation is failed between the POS terminal and router through a FCM (Fast Connection Modem) interface.
.1.3.6.1.4.1.11.2.14.11.15.2.92.3.0.5,HPN-ICF-POSA-MIB::hpnicfPosaFcmPhyNegoFailed,,,,,,This trap is generated whenever the physical layer negotiation is failed between the POS terminal and router through a FCM (Fast Connection Modem) interface.
.1.3.6.1.4.1.11.2.14.11.15.2.92.3.0.6,HPN-ICF-POSA-MIB::hpnicfPosaTcpConnectionExceed,,,,,,This trap is generated whenever the number of connections exceeds the threshold.
.1.3.6.1.4.1.11.2.14.11.15.2.92.3.0.7,HPN-ICF-POSA-MIB::hpnicfPosaFcmConnectionExceed,,,,,,This trap is generated whenever the number of connections exceeds the threshold.
.1.3.6.1.4.1.11.2.14.11.15.2.92.3.0.8,HPN-ICF-POSA-MIB::hpnicfPosaTcpTradeExceed,,,,,,This trap is generated whenever the number of trades in any TCP connect exceeds the limit.
.1.3.6.1.4.1.11.2.14.11.15.2.92.3.1,HPN-ICF-POSA-MIB::hpnicfPosaTrapObjects,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.2.92.3.1.1,HPN-ICF-POSA-MIB::hpnicfPosaAppStateChangeObject,INTEGER,accessible-for-notify,,current,available(1):unavailable(2),This is a dummy MIB object referenced by the hpnicfPosaAppStateChange trap. This object shows the availability changing of corresponding application server.
.1.3.6.1.4.1.11.2.14.11.15.2.93,HPN-ICF-OID-MIB::hpnicfWebAuthentication,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.2.93.1,HPN-ICF-WEB-AUTHENTICATION-MIB::hpnicfWaTrapObjects,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.2.93.1.1,HPN-ICF-WEB-AUTHENTICATION-MIB::hpnicfWaVlanID,Integer32,accessible-for-notify,,current,,The Vlan ID associate with the port and the MAC address.
.1.3.6.1.4.1.11.2.14.11.15.2.93.1.2,HPN-ICF-WEB-AUTHENTICATION-MIB::hpnicfWaReasonCode,INTEGER,accessible-for-notify,,current,globalNumberMax(1):configNumberMax(2):portNumberMax(3):invalidUsername(4):authFail(5):setACLFail(6):changeVlanFail(7):other(8):onlineOverTime(9):noTransferData(10):cutOperation(11):portDisabled(12):portDown(13):userLogout(14):vlanChanged(15):vlanDelted(16),The code indicates the reason for the action of this trap. globalNumberMax: The global number of connections is up to max. configNumberMax: The global number of connections is up to configured max value. portNumberMax: The interface number of connections is up to max. invalidUsername: The username or password is too long or username is empty. authFail: Wrong username or password. setACLFail: Failed to set ACL. changeVlanFail: Failed to set VLAN. other: Other reasons. onlineOverTime: The online time is over the max value. noTransferData: There was no data flow for the connection. cutOperation: There was a cut operation. portDisabled: Web authentication was disabled on interface. portDown: The interface turned down. userLogout: The client required to logout. vlanChanged: The interface VLAN value was changed. vlanDelted: The interface VLAN was deleted.
.1.3.6.1.4.1.11.2.14.11.15.2.93.1.3,HPN-ICF-WEB-AUTHENTICATION-MIB::hpnicfWaActionCode,INTEGER,accessible-for-notify,,current,enabled(1):disabled(2),The code indicates the system action. enabled: Web authentication turns enabled. disabled: Web authentication turns disabled.
.1.3.6.1.4.1.11.2.14.11.15.2.93.1.4,HPN-ICF-WEB-AUTHENTICATION-MIB::hpnicfWaClientMacAddr,OCTET,accessible-for-notify,,current,,The MAC address of the client.
.1.3.6.1.4.1.11.2.14.11.15.2.93.2,HPN-ICF-WEB-AUTHENTICATION-MIB::hpnicfWaTrap,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.2.93.2.0,HPN-ICF-WEB-AUTHENTICATION-MIB::hpnicfWaTrapPrefix,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.2.93.2.0.1,HPN-ICF-WEB-AUTHENTICATION-MIB::hpnicfWaClientLogon,,,,,,It is generated when a client succeeded to logon.
.1.3.6.1.4.1.11.2.14.11.15.2.93.2.0.2,HPN-ICF-WEB-AUTHENTICATION-MIB::hpnicfWaClientLogonFail,,,,,,It is generated when a client failed to logon, the hpnicfWaReasonCode shows the failure reason.
.1.3.6.1.4.1.11.2.14.11.15.2.93.2.0.3,HPN-ICF-WEB-AUTHENTICATION-MIB::hpnicfWaClientLogout,,,,,,It is generated when a client logout, the hpnicfWaReasonCode shows the logout reason.
.1.3.6.1.4.1.11.2.14.11.15.2.93.2.0.4,HPN-ICF-WEB-AUTHENTICATION-MIB::hpnicfWaSysAction,,,,,,It is generated when a system action was occurred, the hpnicfWaActionCode shows the action information.
.1.3.6.1.4.1.11.2.14.11.15.2.94,HPN-ICF-OID-MIB::hpnicfCATVTransceiver,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.2.94.1,HPN-ICF-CATV-TRANSCEIVER-MIB::hpnicfCATVTransStatus,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.2.94.1.1,HPN-ICF-CATV-TRANSCEIVER-MIB::hpnicfCATVTransStatusScalarObjects,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.2.94.1.1.1,HPN-ICF-CATV-TRANSCEIVER-MIB::hpnicfCATVTransState,INTEGER,read-only,,current,on(1):off(2), The state of CATV transceiver. 
.1.3.6.1.4.1.11.2.14.11.15.2.94.1.1.2,HPN-ICF-CATV-TRANSCEIVER-MIB::hpnicfCATVTransInputPwr,Integer32,read-only,,current,, The input power of CATV transceiver. If transceiver is not on site, the value should be zero. 
.1.3.6.1.4.1.11.2.14.11.15.2.94.1.1.3,HPN-ICF-CATV-TRANSCEIVER-MIB::hpnicfCATVTransOutputLevel,Integer32,read-only,,current,, The output level of CATV transceiver. If transceiver is not on site, the value should be zero. 
.1.3.6.1.4.1.11.2.14.11.15.2.94.1.1.4,HPN-ICF-CATV-TRANSCEIVER-MIB::hpnicfCATVTransTemperature,Integer32,read-only,,current,, The temperature of CATV transceiver. If transceiver is not on site, the value should be zero. 
.1.3.6.1.4.1.11.2.14.11.15.2.94.2,HPN-ICF-CATV-TRANSCEIVER-MIB::hpnicfCATVTransceiverMan,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.2.94.2.1,HPN-ICF-CATV-TRANSCEIVER-MIB::hpnicfCATVTransCtrlScalarObjects,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.2.94.2.1.1,HPN-ICF-CATV-TRANSCEIVER-MIB::hpnicfCATVTransInputPwrLowerThr,Integer32,read-write,,current,, A threshold for the CATV transceiver's input power. When the input power of CATV transceiver is lower than threshold, a trap should be generated. 
.1.3.6.1.4.1.11.2.14.11.15.2.94.2.1.2,HPN-ICF-CATV-TRANSCEIVER-MIB::hpnicfCATVTransOutputLvlLowerThr,Integer32,read-write,,current,, A threshold for the CATV transceiver's output level. When the output level of CATV transceiver is lower than threshold, a trap should be generated. 
.1.3.6.1.4.1.11.2.14.11.15.2.94.2.1.3,HPN-ICF-CATV-TRANSCEIVER-MIB::hpnicfCATVTransTempratureUpperThr,Integer32,read-write,,current,, A threshold for the CATV transceiver's temperature. When the temperature of CATV transceiver is higher than threshold, a trap should be generated. 
.1.3.6.1.4.1.11.2.14.11.15.2.94.3,HPN-ICF-CATV-TRANSCEIVER-MIB::hpnicfCATVTansTrap,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.2.94.3.0,HPN-ICF-CATV-TRANSCEIVER-MIB::hpnicfCATVTransTrapPrefix,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.2.94.3.0.1,HPN-ICF-CATV-TRANSCEIVER-MIB::hpnicfCATVTransInputPwrTrap,,,,,, A hpnicfCATVTransInputPwrTrap notification is sent when the input power of CATV transceiver is lower than the threshold. 
.1.3.6.1.4.1.11.2.14.11.15.2.94.3.0.2,HPN-ICF-CATV-TRANSCEIVER-MIB::hpnicfCATVTransInputPwrReTrap,,,,,, A hpnicfCATVTransInputPwrReTrap notification is sent when the input power of CATV transceiver recovered from the last trap. 
.1.3.6.1.4.1.11.2.14.11.15.2.94.3.0.3,HPN-ICF-CATV-TRANSCEIVER-MIB::hpnicfCATVTransOutputLvlTrap,,,,,, A hpnicfCATVTransOutputLvlTrap notification is sent when the output level of CATV transceiver is lower than the threshold. 
.1.3.6.1.4.1.11.2.14.11.15.2.94.3.0.4,HPN-ICF-CATV-TRANSCEIVER-MIB::hpnicfCATVTransOutputLvlReTrap,,,,,, A hpnicfCATVTransOutputLvlReTrap notification is sent when the output level of CATV transceiver recovered from the last trap. 
.1.3.6.1.4.1.11.2.14.11.15.2.94.3.0.5,HPN-ICF-CATV-TRANSCEIVER-MIB::hpnicfCATVTransTemperatureTrap,,,,,, A hpnicfCATVTransTemperatureTrap notification is sent when the temperature of CATV transceiver is higher than the threshold. 
.1.3.6.1.4.1.11.2.14.11.15.2.94.3.0.6,HPN-ICF-CATV-TRANSCEIVER-MIB::hpnicfCATVTransTemperatureReTrap,,,,,, A hpnicfCATVTransTemperatureReTrap notification is sent when the temperature of CATV transceiver recovered from the last trap. 
.1.3.6.1.4.1.11.2.14.11.15.2.95,HPN-ICF-OID-MIB::hpnicfLpbkdt,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.2.95.1,HPN-ICF-LPBKDT-MIB::hpnicfLpbkdtNotifications,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.2.95.1.0,HPN-ICF-LPBKDT-MIB::hpnicfLpbkdtTrapPrefix,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.2.95.1.0.1,HPN-ICF-LPBKDT-MIB::hpnicfLpbkdtTrapLoopbacked,,,,,,Trap message is generated when the interface is looped.
.1.3.6.1.4.1.11.2.14.11.15.2.95.1.0.2,HPN-ICF-LPBKDT-MIB::hpnicfLpbkdtTrapRecovered,,,,,,Trap message is generated when the loops on the interface are eliminated.
.1.3.6.1.4.1.11.2.14.11.15.2.95.1.0.3,HPN-ICF-LPBKDT-MIB::hpnicfLpbkdtTrapPerVlanLoopbacked,,,,,,Trap message is generated when the interface is looped in the VLAN.
.1.3.6.1.4.1.11.2.14.11.15.2.95.1.0.4,HPN-ICF-LPBKDT-MIB::hpnicfLpbkdtTrapPerVlanRecovered,,,,,,Trap message is generated when the loop on the interface is eliminated in the VLAN.
.1.3.6.1.4.1.11.2.14.11.15.2.95.2,HPN-ICF-LPBKDT-MIB::hpnicfLpbkdtObjects,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.2.95.2.1,HPN-ICF-LPBKDT-MIB::hpnicfLpbkdtVlanID,Integer32,accessible-for-notify,,current,,The ID of VLAN.
.1.3.6.1.4.1.11.2.14.11.15.2.96,HPN-ICF-OID-MIB::hpnicfMultiMedia,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.2.97,HPN-ICF-OID-MIB::hpnicfDns,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.2.97.1,HPN-ICF-DNS-MIB::hpnicfDnsObjects,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.2.97.1.1,HPN-ICF-DNS-MIB::hpnicfDnsStaticSrvIpTable,,not-accessible,,current,, This table is a list of DNS static server IPv4 address configuration, which is manually specified. 
.1.3.6.1.4.1.11.2.14.11.15.2.97.1.1.1,HPN-ICF-DNS-MIB::hpnicfDnsStaticSrvIpEntry,,not-accessible,hpnicfDnsStaticSrvIpType:hpnicfDnsStaticSrvIpAddr,current,, An entry of hpnicfDnsStaticSrvIpTable. 
.1.3.6.1.4.1.11.2.14.11.15.2.97.1.1.1.1,HPN-ICF-DNS-MIB::hpnicfDnsStaticSrvIpType,INTEGER,not-accessible,,current,unknown(0):ipv4(1):ipv6(2):ipv4z(3):ipv6z(4):dns(16), This node gives the type of the static DNS server IP address. 
.1.3.6.1.4.1.11.2.14.11.15.2.97.1.1.1.2,HPN-ICF-DNS-MIB::hpnicfDnsStaticSrvIpAddr,OCTET,not-accessible,,current,, This node gives the IP address of the DNS server specified by the user. 
.1.3.6.1.4.1.11.2.14.11.15.2.97.1.1.1.3,HPN-ICF-DNS-MIB::hpnicfDnsStaticSrvIpPriority,Integer32,read-only,,current,, This node gives the priority of the DNS server, according to the creation order. The smaller the value is, the higher the priority level is. 
.1.3.6.1.4.1.11.2.14.11.15.2.97.1.1.1.4,HPN-ICF-DNS-MIB::hpnicfDnsStaticSrvIpRowStatus,INTEGER,read-create,,current,active(1):notInService(2):notReady(3):createAndGo(4):createAndWait(5):destroy(6), This node gives the operation status of this table entry. 
.1.3.6.1.4.1.11.2.14.11.15.2.97.1.2,HPN-ICF-DNS-MIB::hpnicfDnsDynamicSrvIpTable,,not-accessible,,current,, This table is a list of DNS dynamic server IPv4 address configuration, which is dynamically obtained through DHCP. 
.1.3.6.1.4.1.11.2.14.11.15.2.97.1.2.1,HPN-ICF-DNS-MIB::hpnicfDnsDynamicSrvIpEntry,,not-accessible,hpnicfDnsDynamicSrvIpType:hpnicfDnsDynamicSrvIpAddr,current,,An entry of hpnicfDnsDynamicSrvIpTable.
.1.3.6.1.4.1.11.2.14.11.15.2.97.1.2.1.1,HPN-ICF-DNS-MIB::hpnicfDnsDynamicSrvIpType,INTEGER,not-accessible,,current,unknown(0):ipv4(1):ipv6(2):ipv4z(3):ipv6z(4):dns(16), This node gives the type of the dynamic DNS server IP address. 
.1.3.6.1.4.1.11.2.14.11.15.2.97.1.2.1.2,HPN-ICF-DNS-MIB::hpnicfDnsDynamicSrvIpAddr,OCTET,not-accessible,,current,, This node gives the IP address of the DNS server dynamically obtained through DHCP. 
.1.3.6.1.4.1.11.2.14.11.15.2.97.1.2.1.3,HPN-ICF-DNS-MIB::hpnicfDnsDynamicSrvIpPriority,Integer32,read-only,,current,, This node gives the priority of the DNS server, according to the order obtained through DHCP. The smaller the value is, the higher the priority level is. 
.1.3.6.1.4.1.11.2.14.11.15.2.97.2,HPN-ICF-DNS-MIB::hpnicfDnsMIBConformance,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.2.97.2.1,HPN-ICF-DNS-MIB::hpnicfDnsMIBCompliances,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.2.97.2.1.1,HPN-ICF-DNS-MIB::hpnicfDnsMIBCompliance,,,,,, The compliance statement for entities which implement the DNS MIB. 
.1.3.6.1.4.1.11.2.14.11.15.2.97.2.2,HPN-ICF-DNS-MIB::hpnicfDnsMIBGroups,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.2.97.2.2.1,HPN-ICF-DNS-MIB::hpnicfDnsStaticSrvIpGroup,,,,,, A collection of objects providing mandatory DNS server IP addresses manually specified. 
.1.3.6.1.4.1.11.2.14.11.15.2.97.2.2.2,HPN-ICF-DNS-MIB::hpnicfDnsDynamicSrvIpGroup,,,,,, A collection of objects providing mandatory DNS server IP addresses dynamically obtained through DHCP. 
.1.3.6.1.4.1.11.2.14.11.15.2.98,HPN-ICF-OID-MIB::hpnicf3GModem,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.2.98.1,HPN-ICF-3GMODEM-MIB::hpnicf3GModemObjects,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.2.98.1.1,HPN-ICF-3GMODEM-MIB::hpnicfWirelessCard,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.2.98.1.1.1,HPN-ICF-3GMODEM-MIB::hpnicfWirelessCardTable,,not-accessible,,current,,This table contains one row per wireless card.
.1.3.6.1.4.1.11.2.14.11.15.2.98.1.1.1.1,HPN-ICF-3GMODEM-MIB::hpnicfWirelessCardEntry,,not-accessible,hpnicfWirelessCardIndex,current,,Information about a particular wireless card.
.1.3.6.1.4.1.11.2.14.11.15.2.98.1.1.1.1.1,HPN-ICF-3GMODEM-MIB::hpnicfWirelessCardIndex,Integer32,read-only,,current,,The index for this entry.
.1.3.6.1.4.1.11.2.14.11.15.2.98.1.1.1.1.2,HPN-ICF-3GMODEM-MIB::hpnicfWirelessCardModelName,OCTET,read-only,,current,,The model name of this card.
.1.3.6.1.4.1.11.2.14.11.15.2.98.1.1.1.1.3,HPN-ICF-3GMODEM-MIB::hpnicfWirelessCardMfgName,OCTET,read-only,,current,,The name of the manufacturer of this card.
.1.3.6.1.4.1.11.2.14.11.15.2.98.1.1.1.1.4,HPN-ICF-3GMODEM-MIB::hpnicfWirelessCardDescription,OCTET,read-only,,current,,The textual description of this card.
.1.3.6.1.4.1.11.2.14.11.15.2.98.1.1.1.1.5,HPN-ICF-3GMODEM-MIB::hpnicfWirelessCardSerialNumber,OCTET,read-only,,current,,The vendor-specific serial number string for this card.
.1.3.6.1.4.1.11.2.14.11.15.2.98.1.1.1.1.6,HPN-ICF-3GMODEM-MIB::hpnicfWirelessCardCMIIID,OCTET,read-only,,current,,The card ID of CMII (Ministry of Information Industry of China).
.1.3.6.1.4.1.11.2.14.11.15.2.98.1.1.1.1.7,HPN-ICF-3GMODEM-MIB::hpnicfWirelessCardHardwareVersion,OCTET,read-only,,current,,The vendor-specific hardware version string for this card.
.1.3.6.1.4.1.11.2.14.11.15.2.98.1.1.1.1.8,HPN-ICF-3GMODEM-MIB::hpnicfWirelessCardFirmwareVersion,OCTET,read-only,,current,,The vendor-specific firmware version string for this card.
.1.3.6.1.4.1.11.2.14.11.15.2.98.1.1.1.1.9,HPN-ICF-3GMODEM-MIB::hpnicfWirelessCardPRLVersion,OCTET,read-only,,current,,The preferred roaming list version for this card.
.1.3.6.1.4.1.11.2.14.11.15.2.98.1.1.1.1.10,HPN-ICF-3GMODEM-MIB::hpnicfWirelessCardInterfaceIndex,Integer32,read-only,,current,,The interface index in IF-MIB of this card.
.1.3.6.1.4.1.11.2.14.11.15.2.98.1.1.1.1.11,HPN-ICF-3GMODEM-MIB::hpnicfWirelessCardModemStatus,INTEGER,read-only,,current,unknown(1):onLine(2):offLine(3),The status of modem.
.1.3.6.1.4.1.11.2.14.11.15.2.98.1.1.1.1.12,HPN-ICF-3GMODEM-MIB::hpnicfWirelessCardModemMode,INTEGER,read-only,,current,unknown(1):tdscdma(2):wcdma(3):cdma(4),The mode of the 3G-Modem.
.1.3.6.1.4.1.11.2.14.11.15.2.98.1.1.1.1.13,HPN-ICF-3GMODEM-MIB::hpnicfWirelessCardCurNetConn,INTEGER,read-only,,current,unknown(1):noService(2):gsm(3):gprs(4):edge(5):hsdpa(6):hsupa(7):hsupaAndhsdpa(8):hspaPlus(9):umts(10):dchspaPlus(11):lte(12):onexrtt(13):evdo(14):onexrttAndevdo(15):tdscdma(16),The current network connection.
.1.3.6.1.4.1.11.2.14.11.15.2.98.1.1.2,HPN-ICF-3GMODEM-MIB::hpnicfSmsGroup,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.2.98.1.1.2.1,HPN-ICF-3GMODEM-MIB::hpnicfSmsScalarObjects,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.2.98.1.1.2.1.1,HPN-ICF-3GMODEM-MIB::hpnicfSmsRxNotifSwitch,INTEGER,read-write,,current,true(1):false(2),The switch of notification when a short message received.
.1.3.6.1.4.1.11.2.14.11.15.2.98.1.1.2.2,HPN-ICF-3GMODEM-MIB::hpnicfSmsOperationTable,,not-accessible,,current,,This table contains one row per short message.
.1.3.6.1.4.1.11.2.14.11.15.2.98.1.1.2.2.1,HPN-ICF-3GMODEM-MIB::hpnicfSmsOperationEntry,,not-accessible,hpnicfWirelessCardIndex,current,,The infomation about the short message.
.1.3.6.1.4.1.11.2.14.11.15.2.98.1.1.2.2.1.1,HPN-ICF-3GMODEM-MIB::hpnicfSmsDestNumber,OCTET,read-write,,current,,The destination number of the short message.
.1.3.6.1.4.1.11.2.14.11.15.2.98.1.1.2.2.1.2,HPN-ICF-3GMODEM-MIB::hpnicfSmsEncode,INTEGER,read-write,,current,ascii(1):ucs2(2),The encoded type of the short message.
.1.3.6.1.4.1.11.2.14.11.15.2.98.1.1.2.2.1.3,HPN-ICF-3GMODEM-MIB::hpnicfSmsContent,OCTET,read-write,,current,,Content of the short message.
.1.3.6.1.4.1.11.2.14.11.15.2.98.1.1.2.2.1.4,HPN-ICF-3GMODEM-MIB::hpnicfSmsSendStatus,INTEGER,read-write,,current,set2Send(1):ready2Send(2):sending(3):sentAlready(4):telnumberInvalid(5):paramInvalid(6):contentTooLong(7):codeError(8):unknown(9):busy(10):notPresent(11):notSupport(12):initializing(13):noCenterNum(14):noSim(15):simNotReady(16):sendAtFailed(17):sendDisable(18),Status of the short message sent.
.1.3.6.1.4.1.11.2.14.11.15.2.98.1.1.3,HPN-ICF-3GMODEM-MIB::hpnicfWirelessCardOnlineTable,,not-accessible,,current,,This table contains one row per wireless card.
.1.3.6.1.4.1.11.2.14.11.15.2.98.1.1.3.1,HPN-ICF-3GMODEM-MIB::hpnicfWirelessCardOnlineEntry,,not-accessible,hpnicfWirelessCardIndex:hpnicfWirelessCardOnlineTime,current,,Information about online time of a wireless card.
.1.3.6.1.4.1.11.2.14.11.15.2.98.1.1.3.1.1,HPN-ICF-3GMODEM-MIB::hpnicfWirelessCardOnlineTime,Unsigned32,not-accessible,,current,,The index for this entry.
.1.3.6.1.4.1.11.2.14.11.15.2.98.1.1.3.1.2,HPN-ICF-3GMODEM-MIB::hpnicfWirelessCardOnlineType,INTEGER,read-only,,current,up(1):down(2),The online type of this wireless card.
.1.3.6.1.4.1.11.2.14.11.15.2.98.1.2,HPN-ICF-3GMODEM-MIB::hpnicfUIM,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.2.98.1.2.1,HPN-ICF-3GMODEM-MIB::hpnicfUIMInfoTable,,not-accessible,,current,,This table contains one row per UIM.
.1.3.6.1.4.1.11.2.14.11.15.2.98.1.2.1.1,HPN-ICF-3GMODEM-MIB::hpnicfUIMInfoEntry,,not-accessible,hpnicfWirelessCardIndex:hpnicfUIMIndex,current,,The information about the UIM.
.1.3.6.1.4.1.11.2.14.11.15.2.98.1.2.1.1.1,HPN-ICF-3GMODEM-MIB::hpnicfUIMIndex,Integer32,not-accessible,,current,,The index for this entry.
.1.3.6.1.4.1.11.2.14.11.15.2.98.1.2.1.1.2,HPN-ICF-3GMODEM-MIB::hpnicfUIMStatus,INTEGER,read-only,,current,absent(1):initial(2):fault(3):unprotected(4):protected(5):pinLocked(6):pukLocked(7):selfDestruct(8),The status about this UIM.
.1.3.6.1.4.1.11.2.14.11.15.2.98.1.2.1.1.3,HPN-ICF-3GMODEM-MIB::hpnicfUIMImsi,OCTET,read-only,,current,,The IMSI (International Mobile Subscriber Identification Number) about this UIM. If this information is unknown to the agent, then this object will be returned a zero-length string.
.1.3.6.1.4.1.11.2.14.11.15.2.98.1.2.1.1.4,HPN-ICF-3GMODEM-MIB::hpnicfUIMPin,OCTET,read-only,,current,,The PIN about this UIM. If this information is unknown to the agent, then this object will be returned a zero-length string.
.1.3.6.1.4.1.11.2.14.11.15.2.98.1.2.1.1.5,HPN-ICF-3GMODEM-MIB::hpnicfUIMVoltage,Unsigned32,read-only,,current,,The voltage about this UIM. If this information is unknown to the agent, then this object will be returned 4294967295.
.1.3.6.1.4.1.11.2.14.11.15.2.98.1.2.1.1.6,HPN-ICF-3GMODEM-MIB::hpnicfUIMProvider,OCTET,read-only,,current,,The provider of mobile network. If this information is unknown to the agent, then this object will be returned a zero-length string.
.1.3.6.1.4.1.11.2.14.11.15.2.98.1.2.1.1.7,HPN-ICF-3GMODEM-MIB::hpnicfUIMSignal,Integer32,read-only,,current,,The intensity of the signal about this UIM. A value of '99' means no signal.
.1.3.6.1.4.1.11.2.14.11.15.2.98.1.2.1.1.8,HPN-ICF-3GMODEM-MIB::hpnicfUIMTryPinPukTimes,Unsigned32,read-only,,current,,The number of remaining times for unlocking PIN or PUK. The value is associated the same instance of hpnicfUIMStatus. If this information is unknown to the agent, then this object will be returned 4294967295.
.1.3.6.1.4.1.11.2.14.11.15.2.98.1.2.1.1.9,HPN-ICF-3GMODEM-MIB::hpnicfUIMOldPin,OCTET,accessible-for-notify,,current,,The old PIN for this UIM.
.1.3.6.1.4.1.11.2.14.11.15.2.98.1.3,HPN-ICF-3GMODEM-MIB::hpnicf3GCdma,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.2.98.1.3.1,HPN-ICF-3GMODEM-MIB::hpnicf3GCdma1xRttTable,,not-accessible,,current,,CDMA 1xRTT table.
.1.3.6.1.4.1.11.2.14.11.15.2.98.1.3.1.1,HPN-ICF-3GMODEM-MIB::hpnicf3GCdma1xRttEntry,,not-accessible,hpnicfWirelessCardIndex,current,,An entry of hpnicf3GCdma1xRttTable.
.1.3.6.1.4.1.11.2.14.11.15.2.98.1.3.1.1.1,HPN-ICF-3GMODEM-MIB::hpnicf3GCdma1xRttCurrentRssi,Integer32,read-only,,current,,The Received Signal Strength Indicator(RSSI) of CDMA 1xRTT.
.1.3.6.1.4.1.11.2.14.11.15.2.98.1.3.1.1.2,HPN-ICF-3GMODEM-MIB::hpnicf3GCdma1xRttRssiMediumThreshold,Integer32,read-write,,current,,The medium signal threshold of CMDA 1xRTT RSSI. The absolute value of hpnicf3GCdma1xRttRssiMediumThreshold should be less than or equal to the absolute value of hpnicf3GCdma1xRttRssiWeakThreshold (|hpnicf3GCdma1xRttRssiMediumThreshold| <= |hpnicf3GCdma1xRttRssiWeakThreshold|).
.1.3.6.1.4.1.11.2.14.11.15.2.98.1.3.1.1.3,HPN-ICF-3GMODEM-MIB::hpnicf3GCdma1xRttRssiWeakThreshold,Integer32,read-write,,current,,The weak signal threshold of CMDA 1xRTT RSSI. The absolute value of hpnicf3GCdma1xRttRssiMediumThreshold should be less than or equal to the absolute value of hpnicf3GCdma1xRttRssiWeakThreshold (|hpnicf3GCdma1xRttRssiMediumThreshold| <= |hpnicf3GCdma1xRttRssiWeakThreshold|).
.1.3.6.1.4.1.11.2.14.11.15.2.98.1.3.1.1.4,HPN-ICF-3GMODEM-MIB::hpnicf3GCdma1xRttCurServiceStatus,INTEGER,read-only,,current,unknown(1):available(2):emergency(3):lowPower(4):noService(5),The status of service.
.1.3.6.1.4.1.11.2.14.11.15.2.98.1.3.1.1.5,HPN-ICF-3GMODEM-MIB::hpnicf3GCdma1xRttCurRoamingStatus,INTEGER,read-only,,current,unknown(1):roaming(2):home(3),The status of roaming.
.1.3.6.1.4.1.11.2.14.11.15.2.98.1.3.2,HPN-ICF-3GMODEM-MIB::hpnicf3GCdmaEvDoTable,,not-accessible,,current,,CDMA EvDo table.
.1.3.6.1.4.1.11.2.14.11.15.2.98.1.3.2.1,HPN-ICF-3GMODEM-MIB::hpnicf3GCdmaEvDoEntry,,not-accessible,hpnicfWirelessCardIndex,current,,An entry of hpnicf3GCdmaEvDoTable.
.1.3.6.1.4.1.11.2.14.11.15.2.98.1.3.2.1.1,HPN-ICF-3GMODEM-MIB::hpnicf3GCdmaEvDoCurrentRssi,Integer32,read-only,,current,,The Received Signal Strength Indicator(RSSI) of CDMA EvDo.
.1.3.6.1.4.1.11.2.14.11.15.2.98.1.3.2.1.2,HPN-ICF-3GMODEM-MIB::hpnicf3GCdmaEvDoRssiMediumThreshold,Integer32,read-write,,current,,The medium signal threshold of CMDA EvDo RSSI. The absolute value of hpnicf3GCdmaEvDoRssiMediumThreshold should be less than or equal to the absolute value of hpnicf3GCdmaEvDoRssiWeakThreshold (|hpnicf3GCdmaEvDoRssiMediumThreshold| <= |hpnicf3GCdmaEvDoRssiWeakThreshold|).
.1.3.6.1.4.1.11.2.14.11.15.2.98.1.3.2.1.3,HPN-ICF-3GMODEM-MIB::hpnicf3GCdmaEvDoRssiWeakThreshold,Integer32,read-write,,current,,The weak signal threshold of CMDA EvDo RSSI. The absolute value of hpnicf3GCdmaEvDoRssiMediumThreshold should be less than or equal to the absolute value of hpnicf3GCdmaEvDoRssiWeakThreshold (|hpnicf3GCdmaEvDoRssiMediumThreshold| <= |hpnicf3GCdmaEvDoRssiWeakThreshold|).
.1.3.6.1.4.1.11.2.14.11.15.2.98.1.3.2.1.4,HPN-ICF-3GMODEM-MIB::hpnicf3GCdmaEvDoCurServiceStatus,INTEGER,read-only,,current,unknown(1):available(2):emergency(3):lowPower(4):noService(5),The status of service.
.1.3.6.1.4.1.11.2.14.11.15.2.98.1.3.2.1.5,HPN-ICF-3GMODEM-MIB::hpnicf3GCdmaEvDoCurRoamingStatus,INTEGER,read-only,,current,unknown(1):roaming(2):home(3),The status of roaming.
.1.3.6.1.4.1.11.2.14.11.15.2.98.1.4,HPN-ICF-3GMODEM-MIB::hpnicf3GGsm,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.2.98.1.4.1,HPN-ICF-3GMODEM-MIB::hpnicf3GGsmInfoTable,,not-accessible,,current,,GSM information table.
.1.3.6.1.4.1.11.2.14.11.15.2.98.1.4.1.1,HPN-ICF-3GMODEM-MIB::hpnicf3GGsmInfoEntry,,not-accessible,hpnicfWirelessCardIndex,current,,An entry of hpnicf3GGsmInfoTable.
.1.3.6.1.4.1.11.2.14.11.15.2.98.1.4.1.1.1,HPN-ICF-3GMODEM-MIB::hpnicf3GGsmCurrentRssi,Integer32,read-only,,current,,The Received Signal Strength Indicator(RSSI) of GSM.
.1.3.6.1.4.1.11.2.14.11.15.2.98.1.4.1.1.2,HPN-ICF-3GMODEM-MIB::hpnicf3GGsmRssiMediumThreshold,Integer32,read-write,,current,,The medium signal threshold of GSM RSSI. The absolute value of hpnicf3GGsmRssiMediumThreshold should be less than or equal to the absolute value of hpnicf3GGsmRssiWeakThreshold (|hpnicf3GGsmRssiMediumThreshold| <= |hpnicf3GGsmRssiWeakThreshold|).
.1.3.6.1.4.1.11.2.14.11.15.2.98.1.4.1.1.3,HPN-ICF-3GMODEM-MIB::hpnicf3GGsmRssiWeakThreshold,Integer32,read-write,,current,,The weak signal threshold of GSM RSSI. The absolute value of hpnicf3GGsmRssiMediumThreshold should be less than or equal to the absolute value of hpnicf3GGsmRssiWeakThreshold (|hpnicf3GGsmRssiMediumThreshold| <= |hpnicf3GGsmRssiWeakThreshold|).
.1.3.6.1.4.1.11.2.14.11.15.2.98.1.4.1.1.4,HPN-ICF-3GMODEM-MIB::hpnicf3GGsmImsi,OCTET,read-only,,current,,The International Mobile Subscriber Identity(IMSI) of GSM.
.1.3.6.1.4.1.11.2.14.11.15.2.98.1.4.1.1.5,HPN-ICF-3GMODEM-MIB::hpnicf3GGsmImei,OCTET,read-only,,current,,The International Mobile Equipment Identity(IMEI) of GSM.
.1.3.6.1.4.1.11.2.14.11.15.2.98.1.4.1.1.6,HPN-ICF-3GMODEM-MIB::hpnicf3GGsmApn,OCTET,read-write,,current,,The Access Point Name(APN) of GSM.
.1.3.6.1.4.1.11.2.14.11.15.2.98.1.4.1.1.7,HPN-ICF-3GMODEM-MIB::hpnicf3GGsmPacketSessionStatus,INTEGER,read-only,,current,unknown(1):active(2):inactive(3),The packet session status of GSM.
.1.3.6.1.4.1.11.2.14.11.15.2.98.1.4.1.1.8,HPN-ICF-3GMODEM-MIB::hpnicf3GGsmNetworkSelectionMode,INTEGER,read-only,,current,unknown(1):automatic(2):manual(3),The network selection mode of GSM.
.1.3.6.1.4.1.11.2.14.11.15.2.98.1.4.1.1.9,HPN-ICF-3GMODEM-MIB::hpnicf3GGsmMobileNetworkName,OCTET,read-only,,current,,The mobile network name of GSM.
.1.3.6.1.4.1.11.2.14.11.15.2.98.1.4.1.1.10,HPN-ICF-3GMODEM-MIB::hpnicf3GGsmLac,OCTET,read-only,,current,,The Location Area Code(LAC) of GSM.
.1.3.6.1.4.1.11.2.14.11.15.2.98.1.4.1.1.11,HPN-ICF-3GMODEM-MIB::hpnicf3GGsmCellId,OCTET,read-only,,current,,The ID of cell.
.1.3.6.1.4.1.11.2.14.11.15.2.98.1.4.1.1.12,HPN-ICF-3GMODEM-MIB::hpnicf3GGsmSimStatus,INTEGER,read-only,,current,unknown(1):ok(2):notInsert(3):networkReject(4):blocked(5),The status of SIM.
.1.3.6.1.4.1.11.2.14.11.15.2.98.1.4.1.1.13,HPN-ICF-3GMODEM-MIB::hpnicf3GGsmCurServiceStatus,INTEGER,read-only,,current,unknown(1):available(2):emergency(3):lowPower(4):noService(5),The status of service.
.1.3.6.1.4.1.11.2.14.11.15.2.98.1.4.1.1.14,HPN-ICF-3GMODEM-MIB::hpnicf3GGsmCurRoamingStatus,INTEGER,read-only,,current,unknown(1):roaming(2):home(3),The status of roaming.
.1.3.6.1.4.1.11.2.14.11.15.2.98.1.4.1.1.15,HPN-ICF-3GMODEM-MIB::hpnicf3GGsmMcc,OCTET,read-only,,current,,The Mobile Country Code(MCC) of GSM.
.1.3.6.1.4.1.11.2.14.11.15.2.98.1.4.1.1.16,HPN-ICF-3GMODEM-MIB::hpnicf3GGsmMnc,OCTET,read-only,,current,,The Mobile Network Code of GSM.
.1.3.6.1.4.1.11.2.14.11.15.2.98.1.5,HPN-ICF-3GMODEM-MIB::hpnicfLte,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.2.98.1.5.1,HPN-ICF-3GMODEM-MIB::hpnicfLteInfoTable,,not-accessible,,current,,The quality of signal table.
.1.3.6.1.4.1.11.2.14.11.15.2.98.1.5.1.1,HPN-ICF-3GMODEM-MIB::hpnicfLteInfoEntry,,not-accessible,hpnicfWirelessCardIndex,current,,The quality about the signal.
.1.3.6.1.4.1.11.2.14.11.15.2.98.1.5.1.1.1,HPN-ICF-3GMODEM-MIB::hpnicfLteCurrentRsrp,Integer32,read-only,,current,,Reference signal receiving power.
.1.3.6.1.4.1.11.2.14.11.15.2.98.1.5.1.1.2,HPN-ICF-3GMODEM-MIB::hpnicfLteCurrentRsrq,Integer32,read-only,,current,,Reference signal receiving quality.
.1.3.6.1.4.1.11.2.14.11.15.2.98.1.5.1.1.3,HPN-ICF-3GMODEM-MIB::hpnicfLteCurrentSinr,Integer32,read-only,,current,,Signal to interface plus noise ratio.
.1.3.6.1.4.1.11.2.14.11.15.2.98.1.5.1.1.4,HPN-ICF-3GMODEM-MIB::hpnicfLteTxPower,Integer32,read-only,,current,,Transmit power, 0x8000 means invalid.
.1.3.6.1.4.1.11.2.14.11.15.2.98.1.5.1.1.5,HPN-ICF-3GMODEM-MIB::hpnicfLteCurrentRssi,Integer32,read-only,,current,,The Received Signal Strength Indicator(RSSI) of LTE.
.1.3.6.1.4.1.11.2.14.11.15.2.98.1.5.1.1.6,HPN-ICF-3GMODEM-MIB::hpnicfLteRssiMediumThreshold,Integer32,read-write,,current,,The medium signal threshold of LTE RSSI. The absolute value of hpnicfLteRssiMediumThreshold should be less than or equal to the absolute value of hpnicfLteRssiWeakThreshold (|hpnicfLteRssiMediumThreshold| <= |hpnicfLteRssiWeakThreshold|).
.1.3.6.1.4.1.11.2.14.11.15.2.98.1.5.1.1.7,HPN-ICF-3GMODEM-MIB::hpnicfLteRssiWeakThreshold,Integer32,read-write,,current,,The weak signal threshold of LTE RSSI. The absolute value of hpnicfLteRssiMediumThreshold should be less than or equal to the absolute value of hpnicfLteRssiWeakThreshold (|hpnicfLteRssiMediumThreshold| <= |hpnicfLteRssiWeakThreshold|).
.1.3.6.1.4.1.11.2.14.11.15.2.98.2,HPN-ICF-3GMODEM-MIB::hpnicf3GModemTrap,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.2.98.2.1,HPN-ICF-3GMODEM-MIB::hpnicfDevSerialNumber,OCTET,accessible-for-notify,,current,,The serial number of the current device.
.1.3.6.1.4.1.11.2.14.11.15.2.98.2.2,HPN-ICF-3GMODEM-MIB::hpnicfDeviceOUI,OCTET,accessible-for-notify,,current,,The OUI (Organizational Unique Identifier) of the current device.
.1.3.6.1.4.1.11.2.14.11.15.2.98.2.3,HPN-ICF-3GMODEM-MIB::hpnicfAccessMedia,INTEGER,accessible-for-notify,,current,unknown(1):air(2):cable(3),The current access media.
.1.3.6.1.4.1.11.2.14.11.15.2.98.2.4,HPN-ICF-3GMODEM-MIB::hpnicf3GCurrentService,INTEGER,accessible-for-notify,,current,unknown(1):oneXRtt(2):evDo(3):gsm(4):lte(5),The current service type which binded in the notifications.
.1.3.6.1.4.1.11.2.14.11.15.2.98.2.5,HPN-ICF-3GMODEM-MIB::hpnicf3GCurrentRssiBind,Integer32,accessible-for-notify,,current,,The current RSSI which binded in the notifications.
.1.3.6.1.4.1.11.2.14.11.15.2.98.2.6,HPN-ICF-3GMODEM-MIB::hpnicf3GImsiBind,OCTET,accessible-for-notify,,current,,The IMSI which binded in the notifications.
.1.3.6.1.4.1.11.2.14.11.15.2.98.2.7,HPN-ICF-3GMODEM-MIB::hpnicfSmsSrcNumberBind,OCTET,accessible-for-notify,,current,,The source number which binded in the notifications.
.1.3.6.1.4.1.11.2.14.11.15.2.98.2.8,HPN-ICF-3GMODEM-MIB::hpnicfSmsTimeBind,OCTET,accessible-for-notify,,current,,The sending time which binded in the notifications.
.1.3.6.1.4.1.11.2.14.11.15.2.98.2.9,HPN-ICF-3GMODEM-MIB::hpnicfSmsEncodeBind,INTEGER,accessible-for-notify,,current,ascii(1):ucs2(2),The encoded type which binded in the notifications.
.1.3.6.1.4.1.11.2.14.11.15.2.98.2.10,HPN-ICF-3GMODEM-MIB::hpnicfSmsContentBind,OCTET,accessible-for-notify,,current,,The content of short message which binded in the notifications.
.1.3.6.1.4.1.11.2.14.11.15.2.98.3,HPN-ICF-3GMODEM-MIB::hpnicf3GModemTraps,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.2.98.3.0,HPN-ICF-3GMODEM-MIB::hpnicf3GModemTrapPrefix,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.2.98.3.0.1,HPN-ICF-3GMODEM-MIB::hpnicfWirelessCardInserted,,,,,,A hpnicfWirelessCardInserted notification is generated when a wireless card is inserted.
.1.3.6.1.4.1.11.2.14.11.15.2.98.3.0.2,HPN-ICF-3GMODEM-MIB::hpnicfWirelessCardPulledOut,,,,,,A hpnicfWirelessCardPulledOut notification is generated when a wireless card is pulled out.
.1.3.6.1.4.1.11.2.14.11.15.2.98.3.0.3,HPN-ICF-3GMODEM-MIB::hpnicfUIMPinInvalid,,,,,,A hpnicfUIMPinInvalid notification is generated when UIM PIN is invalid.
.1.3.6.1.4.1.11.2.14.11.15.2.98.3.0.4,HPN-ICF-3GMODEM-MIB::hpnicfUIMPinChanged,,,,,,A hpnicfUIMPinInvalid notification is generated when UIM PIN is changed.
.1.3.6.1.4.1.11.2.14.11.15.2.98.3.0.5,HPN-ICF-3GMODEM-MIB::hpnicfAccessMediaChanged,,,,,,A hpnicfAccessMediaChanged notification is generated when access media is changed.
.1.3.6.1.4.1.11.2.14.11.15.2.98.3.0.6,HPN-ICF-3GMODEM-MIB::hpnicf3GRssiStrongSignalTrap,,,,,,A hpnicf3GRssiStrongSignalTrap notification is generated when current RSSI exceeds the medium signal threshold.
.1.3.6.1.4.1.11.2.14.11.15.2.98.3.0.7,HPN-ICF-3GMODEM-MIB::hpnicf3GRssiMediumSignalTrap,,,,,,A hpnicf3GRssiMediumSignalTrap notification is generated when the current RSSI falls or rises to a value between the medium and weak signal thresholds.
.1.3.6.1.4.1.11.2.14.11.15.2.98.3.0.8,HPN-ICF-3GMODEM-MIB::hpnicf3GRssiWeakSignalTrap,,,,,,A hpnicf3GRssiWeakSignalTrap notification is generated when current RSSI falls below the weak signal threshold.
.1.3.6.1.4.1.11.2.14.11.15.2.98.3.0.9,HPN-ICF-3GMODEM-MIB::hpnicfSmsTxNotification,,,,,,A hpnicfSmsTxNotification notification is generated when a short message is sent.
.1.3.6.1.4.1.11.2.14.11.15.2.98.3.0.10,HPN-ICF-3GMODEM-MIB::hpnicfSmsRxNotification,,,,,,A hpnicfSmsRxNotification notification is generated when a short message is recieved.
.1.3.6.1.4.1.11.2.14.11.15.2.99,HPN-ICF-OID-MIB::hpnicfPortal,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.2.99.1,HPN-ICF-PORTAL-MIB::hpnicfPortalConfig,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.2.99.1.1,HPN-ICF-PORTAL-MIB::hpnicfPortalMaxUserNumber,Integer32,read-write,,current,,Specify the maximum number of online users, the value to be set should meet the following two conditions: 1. Less than or equal to hpnicfPortalUserNumberUpperLimit. 2. Greater than or equal to one. The default value is equal to hpnicfPortalUserNumberUpperLimit.
.1.3.6.1.4.1.11.2.14.11.15.2.99.1.2,HPN-ICF-PORTAL-MIB::hpnicfPortalCurrentUserNumber,Integer32,read-only,,current,,The current number of users connecting to the portal.
.1.3.6.1.4.1.11.2.14.11.15.2.99.1.3,HPN-ICF-PORTAL-MIB::hpnicfPortalStatus,INTEGER,read-only,,current,enabled(1):disabled(2),It indicates the portal status. enabled: Portal is enabled on one or more interfaces. disabled: Portal is not enabled on any interface.
.1.3.6.1.4.1.11.2.14.11.15.2.99.1.4,HPN-ICF-PORTAL-MIB::hpnicfPortalUserNumberUpperLimit,Integer32,read-only,,current,,The upper limit of hpnicfPortalMaxUserNumber.
.1.3.6.1.4.1.11.2.14.11.15.2.99.1.5,HPN-ICF-PORTAL-MIB::hpnicfPortalNasId,OCTET,read-write,,current,,The nas id of this device.
.1.3.6.1.4.1.11.2.14.11.15.2.99.2,HPN-ICF-PORTAL-MIB::hpnicfPortalTables,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.2.99.2.1,HPN-ICF-PORTAL-MIB::hpnicfPortalServerTable,,not-accessible,,current,,This table defines the name and URL of portal server. It can not be created and destroyed by MIB.
.1.3.6.1.4.1.11.2.14.11.15.2.99.2.1.1,HPN-ICF-PORTAL-MIB::hpnicfPortalServerEntry,,not-accessible,hpnicfPortalServerName,current,,There is a row in this table for each name and URL of portal server. It is indexed using the object hpnicfPortalServerName.
.1.3.6.1.4.1.11.2.14.11.15.2.99.2.1.1.1,HPN-ICF-PORTAL-MIB::hpnicfPortalServerName,OCTET,accessible-for-notify,,current,,It is the index of the table of hpnicfPortalServerTable, it shows the name of the portal server.
.1.3.6.1.4.1.11.2.14.11.15.2.99.2.1.1.2,HPN-ICF-PORTAL-MIB::hpnicfPortalServerUrl,OCTET,read-write,,current,,It shows the uniform resource locator to the portal server. Users which have not logon to portal will be redirected to the portal server according to hpnicfPortalServerUrl. The value is consisted of protocol, IP address and relative path. For example: HTTP://10.1.1.1/portal It is not configurable when the portal server has been enabled.
.1.3.6.1.4.1.11.2.14.11.15.2.99.2.1.1.3,HPN-ICF-PORTAL-MIB::hpnicfPortalServerPort,Integer32,read-write,,current,,It shows the UDP port of the portal server. The port will be used when client sends packets to portal server. Default value is 50100. It is not configurable when the portal server has been enabled.
.1.3.6.1.4.1.11.2.14.11.15.2.99.2.2,HPN-ICF-PORTAL-MIB::hpnicfPortalIfInfoTable,,not-accessible,,current,,This table describes the portal information on some interface.
.1.3.6.1.4.1.11.2.14.11.15.2.99.2.2.1,HPN-ICF-PORTAL-MIB::hpnicfPortalIfInfoEntry,,not-accessible,ifIndex,current,,There is a row in this table for a interface on which portal has been enabled. It is indexed using the object ifIndex.
.1.3.6.1.4.1.11.2.14.11.15.2.99.2.2.1.1,HPN-ICF-PORTAL-MIB::hpnicfPortalAuthReqNumber,Integer32,read-only,,current,,It shows the number of authentication request messages which are sent by portal module to AAA module.
.1.3.6.1.4.1.11.2.14.11.15.2.99.2.2.1.2,HPN-ICF-PORTAL-MIB::hpnicfPortalAuthSuccNumber,Integer32,read-only,,current,,It shows the number of authentication success response messages which are sent by AAA module to portal module.
.1.3.6.1.4.1.11.2.14.11.15.2.99.2.2.1.3,HPN-ICF-PORTAL-MIB::hpnicfPortalAuthFailNumber,Integer32,read-only,,current,,It shows the number of authentication failure response messages which are sent by AAA module to portal module.
.1.3.6.1.4.1.11.2.14.11.15.2.99.2.3,HPN-ICF-PORTAL-MIB::hpnicfPortalIfServerTable,,not-accessible,,current,,This table describes the portal information on some interface.
.1.3.6.1.4.1.11.2.14.11.15.2.99.2.3.1,HPN-ICF-PORTAL-MIB::hpnicfPortalIfServerEntry,,not-accessible,hpnicfPortalIfServerIndex,current,,There is a row in this table for a interface on which portal has been enabled. It is indexed using the object ifIndex.
.1.3.6.1.4.1.11.2.14.11.15.2.99.2.3.1.1,HPN-ICF-PORTAL-MIB::hpnicfPortalIfServerIndex,Integer32,not-accessible,,current,,It is the index of the table of hpnicfIfPtServerTable, it shows the index of the portal server.
.1.3.6.1.4.1.11.2.14.11.15.2.99.2.3.1.2,HPN-ICF-PORTAL-MIB::hpnicfPortalIfServerUrl,OCTET,read-create,,current,,It shows the uniform resource locator to the portal server. Users which have not logon to portal will be redirected to the portal server according to hpnicfPortalServerIfUrl. The value is consisted of protocol, IP address and relative path. For example: HTTP://10.1.1.1/portal It is not configurable when the portal server has been enabled.
.1.3.6.1.4.1.11.2.14.11.15.2.99.2.3.1.3,HPN-ICF-PORTAL-MIB::hpnicfPortalIfServerRowStatus,INTEGER,read-create,,current,active(1):notInService(2):notReady(3):createAndGo(4):createAndWait(5):destroy(6),This object is responsible for managing the creation, deletion and modification of rows, which support active status and CreateAndGo, Destroy operation. To create a new row, portal server must be specified. To destroy an existent row, the portal server MUST NOT be referred by interface.
.1.3.6.1.4.1.11.2.14.11.15.2.99.2.4,HPN-ICF-PORTAL-MIB::hpnicfPortalIfVlanNasIDTable,,not-accessible,,current,,This table describes the interface on which portal has been enabled, the Vlan that the interface belongs to and the NAS ID to which the Vlan is bound.
.1.3.6.1.4.1.11.2.14.11.15.2.99.2.4.1,HPN-ICF-PORTAL-MIB::hpnicfPortalIfVlanNasIDEntry,,not-accessible,hpnicfPortalIfVlanNasIDIfIndex:hpnicfPortalIfVlanNasIDVlanID,current,,There is a row in this table for a interface on which portal has been enabled, the Vlan that the interface belongs to and the NAS ID to which the Vlan is bound. It is indexed using the object ifIndex and Vlan that the interface belongs to.
.1.3.6.1.4.1.11.2.14.11.15.2.99.2.4.1.1,HPN-ICF-PORTAL-MIB::hpnicfPortalIfVlanNasIDIfIndex,Integer32,not-accessible,,current,,It is the index of the table of hpnicfPortalIfVlanNasIDTable, it shows the interface on which portal has been enabled.
.1.3.6.1.4.1.11.2.14.11.15.2.99.2.4.1.2,HPN-ICF-PORTAL-MIB::hpnicfPortalIfVlanNasIDVlanID,Integer32,not-accessible,,current,,It is the index of the table of hpnicfPortalIfVlanNasIDTable, it shows the Vlan that the interface belongs to.
.1.3.6.1.4.1.11.2.14.11.15.2.99.2.4.1.3,HPN-ICF-PORTAL-MIB::hpnicfPortalIfVlanNasIDNasID,OCTET,read-only,,current,,It is the NAS ID to which the Vlan is bound to.
.1.3.6.1.4.1.11.2.14.11.15.2.99.2.5,HPN-ICF-PORTAL-MIB::hpnicfPortalSSIDFreeRuleTable,,not-accessible,,current,,This table describes SSID portal-free rule(s) allows specified users to access specified external websites without portal authentication.
.1.3.6.1.4.1.11.2.14.11.15.2.99.2.5.1,HPN-ICF-PORTAL-MIB::hpnicfPortalSSIDFreeRuleEntry,,not-accessible,hpnicfPortalSSIDFreeRuleIndex,current,,There is a row in this table for SSID portal-free rule. It is indexed using the object Index.
.1.3.6.1.4.1.11.2.14.11.15.2.99.2.5.1.1,HPN-ICF-PORTAL-MIB::hpnicfPortalSSIDFreeRuleIndex,Integer32,not-accessible,,current,,It is the index of the table of hpnicfPortalSSIDFreeRuleTable, it shows the index of the SSID portal-free rule.
.1.3.6.1.4.1.11.2.14.11.15.2.99.2.5.1.2,HPN-ICF-PORTAL-MIB::hpnicfPortalSSIDFreeRuleSrcSSID,OCTET,read-create,,current,,The SSID match against the packet's source SSID.
.1.3.6.1.4.1.11.2.14.11.15.2.99.2.5.1.3,HPN-ICF-PORTAL-MIB::hpnicfPortalSSIDFreeRuleRowStatus,INTEGER,read-create,,current,active(1):notInService(2):notReady(3):createAndGo(4):createAndWait(5):destroy(6),This object is responsible for managing the creation, deletion and modification of rows, which support active status and CreateAndGo, Destroy operation.
.1.3.6.1.4.1.11.2.14.11.15.2.99.2.5.1.4,HPN-ICF-PORTAL-MIB::hpnicfPortalSSIDFreeRuleSrcSpot,OCTET,read-create,,current,,The spot match against the packet's source spot.
.1.3.6.1.4.1.11.2.14.11.15.2.99.2.6,HPN-ICF-PORTAL-MIB::hpnicfPortalMacTriggerSrvTable,,not-accessible,,current,,This table describes the configration of MAC Trigger Portal server.
.1.3.6.1.4.1.11.2.14.11.15.2.99.2.6.1,HPN-ICF-PORTAL-MIB::hpnicfPortalMacTriggerSrvEntry,,not-accessible,hpnicfPortalMacTriggerSrvIndex,current,,There is a row in the table for MAC Trigger Portal server. It is indexed using the object Index.
.1.3.6.1.4.1.11.2.14.11.15.2.99.2.6.1.1,HPN-ICF-PORTAL-MIB::hpnicfPortalMacTriggerSrvIndex,Integer32,not-accessible,,current,,It is the index of the table of hpnicfPortalMacTriggerSrvTable, it shows the index of the MAC Trigger Portal server.
.1.3.6.1.4.1.11.2.14.11.15.2.99.2.6.1.2,HPN-ICF-PORTAL-MIB::hpnicfPortalMacTriggerSrvIPAddrType,INTEGER,read-create,,current,unknown(0):ipv4(1):ipv6(2):ipv4z(3):ipv6z(4):dns(16),The type of MAC Trigger Portal server IP address. While other types of addresses are defined in the InetAddressType textual convention, and DNS names, a classifier can only look at packets on the wire.
.1.3.6.1.4.1.11.2.14.11.15.2.99.2.6.1.3,HPN-ICF-PORTAL-MIB::hpnicfPortalMacTriggerSrvIP,OCTET,read-create,,current,,It shows the IP address of MAC Trigger Portal server.
.1.3.6.1.4.1.11.2.14.11.15.2.99.2.6.1.4,HPN-ICF-PORTAL-MIB::hpnicfPortalMacTriggerSrvPort,Integer32,read-create,,current,,It shows the UDP port of MAC Trigger Portal server. The port will be used when client sends packets to MAC Trigger Portal server. Default value is 50100.
.1.3.6.1.4.1.11.2.14.11.15.2.99.2.6.1.5,HPN-ICF-PORTAL-MIB::hpnicfPortalMacTriggerSrvRowStatus,INTEGER,read-create,,current,active(1):notInService(2):notReady(3):createAndGo(4):createAndWait(5):destroy(6),This object is responsible for managing the creation, deletion and modification of rows, which support active status and CreateAndGo, Destroy operation.
.1.3.6.1.4.1.11.2.14.11.15.2.99.2.7,HPN-ICF-PORTAL-MIB::hpnicfPortalMacTriggerOnIfTable,,not-accessible,,current,,This table describes the configration of Portal MAC Trigger on interface.
.1.3.6.1.4.1.11.2.14.11.15.2.99.2.7.1,HPN-ICF-PORTAL-MIB::hpnicfPortalMacTriggerOnIfEntry,,not-accessible,hpnicfPortalMacTriggerOnIfIfIndex,current,,There is a row in the table for Portal MAC Trigger configuration on interface. It is indexed using the object Index.
.1.3.6.1.4.1.11.2.14.11.15.2.99.2.7.1.1,HPN-ICF-PORTAL-MIB::hpnicfPortalMacTriggerOnIfIfIndex,Integer32,not-accessible,,current,,It is the interface index and the index of hpnicfPortalMacTriggerOnIfTable.
.1.3.6.1.4.1.11.2.14.11.15.2.99.2.7.1.2,HPN-ICF-PORTAL-MIB::hpnicfPortalMacTriggerOnIfDetctFlowPeriod,Integer32,read-create,,current,,It shows the period of detecting the user flow when MAC Trigger and Portal is enabled. The unit is second.
.1.3.6.1.4.1.11.2.14.11.15.2.99.2.7.1.3,HPN-ICF-PORTAL-MIB::hpnicfPortalMacTriggerOnIfThresholdFlow,Unsigned32,read-create,,current,,It shows the threshold flow of the user to triggering authentication when MAC Trigger and Portal is enabled. The unit is byte.
.1.3.6.1.4.1.11.2.14.11.15.2.99.2.7.1.4,HPN-ICF-PORTAL-MIB::hpnicfPortalMacTriggerOnIfRowStatus,INTEGER,read-create,,current,active(1):notInService(2):notReady(3):createAndGo(4):createAndWait(5):destroy(6),This object is responsible for managing the creation, deletion and modification of rows, which support active status and CreateAndGo, Destroy operation.
.1.3.6.1.4.1.11.2.14.11.15.2.99.2.8,HPN-ICF-PORTAL-MIB::hpnicfPortalFreeRuleTable,,not-accessible,,current,,This table describes portal-free rule(s) allows specified users to access specified external websites without portal authentication.
.1.3.6.1.4.1.11.2.14.11.15.2.99.2.8.1,HPN-ICF-PORTAL-MIB::hpnicfPortalFreeRuleEntry,,not-accessible,hpnicfPortalFreeRuleIndex,current,,There is a row in this table for portal-free rule. It is indexed using the object Index.
.1.3.6.1.4.1.11.2.14.11.15.2.99.2.8.1.1,HPN-ICF-PORTAL-MIB::hpnicfPortalFreeRuleIndex,Integer32,not-accessible,,current,,It is the index of the table of hpnicfPortalFreeRuleTable, it shows the index of the portal-free rule.
.1.3.6.1.4.1.11.2.14.11.15.2.99.2.8.1.2,HPN-ICF-PORTAL-MIB::hpnicfPortalFreeRuleSrcIfIndex,Integer32,read-create,,current,,The index of source interface.
.1.3.6.1.4.1.11.2.14.11.15.2.99.2.8.1.3,HPN-ICF-PORTAL-MIB::hpnicfPortalFreeRuleSrcVlanID,Integer32,read-create,,current,,The identification of source vlan.
.1.3.6.1.4.1.11.2.14.11.15.2.99.2.8.1.4,HPN-ICF-PORTAL-MIB::hpnicfPortalFreeRuleSrcMac,OCTET,read-create,,current,,The MAC address to match against the packet's source MAC address.
.1.3.6.1.4.1.11.2.14.11.15.2.99.2.8.1.5,HPN-ICF-PORTAL-MIB::hpnicfPortalFreeRuleAddrType,INTEGER,read-create,,current,unknown(0):ipv4(1):ipv6(2):ipv4z(3):ipv6z(4):dns(16),The type of IP address used by this classifier entry. While other types of addresses are defined in the InetAddressType textual convention, and DNS names, a classifier can only look at packets on the wire.
.1.3.6.1.4.1.11.2.14.11.15.2.99.2.8.1.6,HPN-ICF-PORTAL-MIB::hpnicfPortalFreeRuleSrcAddr,OCTET,read-create,,current,,The IP address to match against the packet's source IP address. This may be a DNS name or an IPv4 or IPv6 prefix. hpnicfPortalFreeRuleSrcPrefix indicates the number of bits that are relevant.
.1.3.6.1.4.1.11.2.14.11.15.2.99.2.8.1.7,HPN-ICF-PORTAL-MIB::hpnicfPortalFreeRuleSrcPrefix,Unsigned32,read-create,,current,,The length of the CIDR Prefix carried in hpnicfPortalFreeRuleSrcAddr. In IPv4 addresses, a length of 0 indicates a match of any address; a length of 32 indicates a match of a single host address, and a length between 0 and 32 indicates the use of a CIDR Prefix. IPv6 is similar, except that prefix lengths range from 0..128.
.1.3.6.1.4.1.11.2.14.11.15.2.99.2.8.1.8,HPN-ICF-PORTAL-MIB::hpnicfPortalFreeRuleDstAddr,OCTET,read-create,,current,,The IP address to match against the packet's destination IP address. This may be a DNS name or an IPv4 or IPv6 prefix. hpnicfPortalFreeRuleDstPrefix indicates the number of bits that are relevant.
.1.3.6.1.4.1.11.2.14.11.15.2.99.2.8.1.9,HPN-ICF-PORTAL-MIB::hpnicfPortalFreeRuleDstPrefix,Unsigned32,read-create,,current,,The length of the CIDR Prefix carried in hpnicfPortalFreeRuleDstAddr. In IPv4 addresses, a length of 0 indicates a match of any address; a length of 32 indicates a match of a single host address, and a length between 0 and 32 indicates the use of a CIDR Prefix. IPv6 is similar, except that prefix lengths range from 0..128.
.1.3.6.1.4.1.11.2.14.11.15.2.99.2.8.1.10,HPN-ICF-PORTAL-MIB::hpnicfPortalFreeRuleProtocol,INTEGER,read-create,,current,invalid(0):tcp(6):udp(17),The protocol-type of port.
.1.3.6.1.4.1.11.2.14.11.15.2.99.2.8.1.11,HPN-ICF-PORTAL-MIB::hpnicfPortalFreeRuleSrcPort,Integer32,read-create,,current,,The source port allows users to access.
.1.3.6.1.4.1.11.2.14.11.15.2.99.2.8.1.12,HPN-ICF-PORTAL-MIB::hpnicfPortalFreeRuleDstPort,Integer32,read-create,,current,,The destination port allows users to access.
.1.3.6.1.4.1.11.2.14.11.15.2.99.2.8.1.13,HPN-ICF-PORTAL-MIB::hpnicfPortalFreeRuleRowStatus,INTEGER,read-create,,current,active(1):notInService(2):notReady(3):createAndGo(4):createAndWait(5):destroy(6),This object is responsible for managing the creation, deletion and modification of rows, which support active status and CreateAndGo, Destroy operation.
.1.3.6.1.4.1.11.2.14.11.15.2.99.2.9,HPN-ICF-PORTAL-MIB::hpnicfPortalForbiddenRuleTable,,not-accessible,,current,,This table describes a portal-forbidden rule does not allow specified users to access specified external websites.
.1.3.6.1.4.1.11.2.14.11.15.2.99.2.9.1,HPN-ICF-PORTAL-MIB::hpnicfPortalForbiddenRuleEntry,,not-accessible,hpnicfPortalForbiddenRuleIndex,current,,There is a row in this table for portal-forbidden rule. It is indexed using the object Index.
.1.3.6.1.4.1.11.2.14.11.15.2.99.2.9.1.1,HPN-ICF-PORTAL-MIB::hpnicfPortalForbiddenRuleIndex,Integer32,not-accessible,,current,,It is the index of the table of hpnicfPortalForbiddenRuleTable, it shows the index of the portal-forbidden rule.
.1.3.6.1.4.1.11.2.14.11.15.2.99.2.9.1.2,HPN-ICF-PORTAL-MIB::hpnicfPortalForbiddenRuleSrcIfIndex,Integer32,read-create,,current,,The index of source interface.
.1.3.6.1.4.1.11.2.14.11.15.2.99.2.9.1.3,HPN-ICF-PORTAL-MIB::hpnicfPortalForbiddenRuleSrcVlanID,Integer32,read-create,,current,,The identification of source vlan.
.1.3.6.1.4.1.11.2.14.11.15.2.99.2.9.1.4,HPN-ICF-PORTAL-MIB::hpnicfPortalForbiddenRuleSrcMac,OCTET,read-create,,current,,The MAC address to match against the packet's source MAC address.
.1.3.6.1.4.1.11.2.14.11.15.2.99.2.9.1.5,HPN-ICF-PORTAL-MIB::hpnicfPortalForbiddenRuleAddrType,INTEGER,read-create,,current,unknown(0):ipv4(1):ipv6(2):ipv4z(3):ipv6z(4):dns(16),The type of IP address used by this classifier entry. While other types of addresses are defined in the InetAddressType textual convention, and DNS names, a classifier can only look at packets on the wire.
.1.3.6.1.4.1.11.2.14.11.15.2.99.2.9.1.6,HPN-ICF-PORTAL-MIB::hpnicfPortalForbiddenRuleSrcAddr,OCTET,read-create,,current,,The IP address to match against the packet's source IP address. This may be a DNS name or an IPv4 or IPv6 prefix. hpnicfPortalForbiddenRuleSrcPrefix indicates the number of bits that are relevant.
.1.3.6.1.4.1.11.2.14.11.15.2.99.2.9.1.7,HPN-ICF-PORTAL-MIB::hpnicfPortalForbiddenRuleSrcPrefix,Unsigned32,read-create,,current,,The length of the CIDR Prefix carried in hpnicfPortalFreeRuleSrcAddr. In IPv4 addresses, a length of 0 indicates a match of any address; a length of 32 indicates a match of a single host address, and a length between 0 and 32 indicates the use of a CIDR Prefix. IPv6 is similar, except that prefix lengths range from 0..128.
.1.3.6.1.4.1.11.2.14.11.15.2.99.2.9.1.8,HPN-ICF-PORTAL-MIB::hpnicfPortalForbiddenRuleDstAddr,OCTET,read-create,,current,,The IP address to match against the packet's destination IP address. This may be a DNS name or an IPv4 or IPv6 prefix. hpnicfPortalForbiddenRuleDstPrefix indicates the number of bits that are relevant.
.1.3.6.1.4.1.11.2.14.11.15.2.99.2.9.1.9,HPN-ICF-PORTAL-MIB::hpnicfPortalForbiddenRuleDstPrefix,Unsigned32,read-create,,current,,The length of the CIDR Prefix carried in hpnicfPortalFreeRuleDstAddr. In IPv4 addresses, a length of 0 indicates a match of any address; a length of 32 indicates a match of a single host address, and a length between 0 and 32 indicates the use of a CIDR Prefix. IPv6 is similar, except that prefix lengths range from 0..128.
.1.3.6.1.4.1.11.2.14.11.15.2.99.2.9.1.10,HPN-ICF-PORTAL-MIB::hpnicfPortalForbiddenRuleProtocol,INTEGER,read-create,,current,invalid(0):tcp(6):udp(17),The protocol-type of port.
.1.3.6.1.4.1.11.2.14.11.15.2.99.2.9.1.11,HPN-ICF-PORTAL-MIB::hpnicfPortalForbiddenRuleSrcPort,Integer32,read-create,,current,,The source port does not allow users to access.
.1.3.6.1.4.1.11.2.14.11.15.2.99.2.9.1.12,HPN-ICF-PORTAL-MIB::hpnicfPortalForbiddenRuleDstPort,Integer32,read-create,,current,,The destination port does not allow users to access.
.1.3.6.1.4.1.11.2.14.11.15.2.99.2.9.1.13,HPN-ICF-PORTAL-MIB::hpnicfPortalForbiddenRuleRowStatus,INTEGER,read-create,,current,active(1):notInService(2):notReady(3):createAndGo(4):createAndWait(5):destroy(6),This object is responsible for managing the creation, deletion and modification of rows, which support active status and CreateAndGo, Destroy operation.
.1.3.6.1.4.1.11.2.14.11.15.2.99.3,HPN-ICF-PORTAL-MIB::hpnicfPortalTraps,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.2.99.3.0,HPN-ICF-PORTAL-MIB::hpnicfPortalTrapPrefix,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.2.99.3.0.1,HPN-ICF-PORTAL-MIB::hpnicfPortalServerLost,,,,,,This trap is generated when the device finds that the portal server is unreachable, the portal server's name is hpnicfPortalServerName, and the portal server's IP is hpnicfPortalServerIP, and the portal server's port is hpnicfPortalServerPort, and the portal server has been enabled.
.1.3.6.1.4.1.11.2.14.11.15.2.99.3.0.2,HPN-ICF-PORTAL-MIB::hpnicfPortalServerGet,,,,,,This trap is generated when the device finds that the state of portal server changes from unreachable state to reachable, the portal server's name is hpnicfPortalServerName, and the portal server's IP is hpnicfPortalServerIP, and the portal server's port is hpnicfPortalServerPort, and the portal server has been enabled.
.1.3.6.1.4.1.11.2.14.11.15.2.99.3.1,HPN-ICF-PORTAL-MIB::hpnicfPortalTrapVarObjects,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.2.99.3.1.1,HPN-ICF-PORTAL-MIB::hpnicfPortalFirstTrapTime,TimeTicks,accessible-for-notify,,current,,Represents the first trap time.
.1.3.6.1.4.1.11.2.14.11.15.2.99.3.1.2,HPN-ICF-PORTAL-MIB::hpnicfPortalServerIP,OCTET,accessible-for-notify,,current,,The portal server's IP.
.1.3.6.1.4.1.11.2.14.11.15.2.99.4,HPN-ICF-PORTAL-MIB::hpnicfPortalStatistic,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.2.99.4.1,HPN-ICF-PORTAL-MIB::hpnicfPortalStatAuthReq,Counter64,read-only,,current,,It shows the total number of portal authentication requests from the portal server.
.1.3.6.1.4.1.11.2.14.11.15.2.99.4.2,HPN-ICF-PORTAL-MIB::hpnicfPortalStatAckLogout,Counter64,read-only,,current,,It shows the number of logout requests from the portal server.
.1.3.6.1.4.1.11.2.14.11.15.2.99.4.3,HPN-ICF-PORTAL-MIB::hpnicfPortalStatNotifyLogout,Counter64,read-only,,current,,It shows the number of logout requests from the access device.
.1.3.6.1.4.1.11.2.14.11.15.2.99.4.4,HPN-ICF-PORTAL-MIB::hpnicfPortalStatChallengeTimeout,Counter64,read-only,,current,,It shows the number of challenge from the portal server without response.
.1.3.6.1.4.1.11.2.14.11.15.2.99.4.5,HPN-ICF-PORTAL-MIB::hpnicfPortalStatChallengeBusy,Counter64,read-only,,current,,It shows the number of device-busy responses for challenges from the portal server.
.1.3.6.1.4.1.11.2.14.11.15.2.99.4.6,HPN-ICF-PORTAL-MIB::hpnicfPortalStatChallengeFail,Counter64,read-only,,current,,It shows the number of challenges from the portal server with failure response.
.1.3.6.1.4.1.11.2.14.11.15.2.99.4.7,HPN-ICF-PORTAL-MIB::hpnicfPortalStatAuthTimeout,Counter64,read-only,,current,,It shows the number of authentication requests from the portal server without responses.
.1.3.6.1.4.1.11.2.14.11.15.2.99.4.8,HPN-ICF-PORTAL-MIB::hpnicfPortalStatAuthFail,Counter64,read-only,,current,,It shows the number of authentication requests from the portal server with failure responses.
.1.3.6.1.4.1.11.2.14.11.15.2.99.4.9,HPN-ICF-PORTAL-MIB::hpnicfPortalStatPwdError,Counter64,read-only,,current,,It shows the number of password errors.
.1.3.6.1.4.1.11.2.14.11.15.2.99.4.10,HPN-ICF-PORTAL-MIB::hpnicfPortalStatAuthBusy,Counter64,read-only,,current,,It shows the number of device-busy responses to authentication requests from the portal server.
.1.3.6.1.4.1.11.2.14.11.15.2.99.4.11,HPN-ICF-PORTAL-MIB::hpnicfPortalStatAuthDisordered,Counter64,read-only,,current,,It shows the number of disordered authentication packets from the portal server.
.1.3.6.1.4.1.11.2.14.11.15.2.99.4.12,HPN-ICF-PORTAL-MIB::hpnicfPortalStatAuthUnknownError,Counter64,read-only,,current,,It shows the number of unknown errors.
.1.3.6.1.4.1.11.2.14.11.15.2.99.4.13,HPN-ICF-PORTAL-MIB::hpnicfPortalStatAuthResp,Counter64,read-only,,current,,It shows the number of authentication response messages which are sent by device to portal server.
.1.3.6.1.4.1.11.2.14.11.15.2.99.4.14,HPN-ICF-PORTAL-MIB::hpnicfPortalStatChallengeReq,Counter64,read-only,,current,,It shows the number of challenge request messages which are sent by portal server to device.
.1.3.6.1.4.1.11.2.14.11.15.2.99.4.15,HPN-ICF-PORTAL-MIB::hpnicfPortalStatChallengeResp,Counter64,read-only,,current,,It shows the number of challenge response messages which are sent by device to portal server.
.1.3.6.1.4.1.11.2.14.11.15.2.99.4.16,HPN-ICF-PORTAL-MIB::hpnicfPortalStatHttpReq,Counter64,read-only,,current,,It shows the number of http request messages which are sent by portal user to device.
.1.3.6.1.4.1.11.2.14.11.15.2.99.4.17,HPN-ICF-PORTAL-MIB::hpnicfPortalStatHttpResp,Counter64,read-only,,current,,It shows the number of http response messages which are sent by device to portal user.
.1.3.6.1.4.1.11.2.14.11.15.2.99.5,HPN-ICF-PORTAL-MIB::hpnicfPortalPktStatistic,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.2.99.5.1,HPN-ICF-PORTAL-MIB::hpnicfPortalPktStaReqAuthNum,Counter64,read-only,,current,,It shows the total number of portal authentication requests from the portal server.
.1.3.6.1.4.1.11.2.14.11.15.2.99.5.2,HPN-ICF-PORTAL-MIB::hpnicfPortalPktStaAckAuthSuccess,Counter64,read-only,,current,,It shows the total number of the response to REQ-AUTH packet of portal server including error code 0 in the packet, that is authentication success.
.1.3.6.1.4.1.11.2.14.11.15.2.99.5.3,HPN-ICF-PORTAL-MIB::hpnicfPortalPktStaAckAuthReject,Counter64,read-only,,current,,It shows the total number of the response to REQ-AUTH packet of portal server including error code 1 in the packet, that is rejected by server.
.1.3.6.1.4.1.11.2.14.11.15.2.99.5.4,HPN-ICF-PORTAL-MIB::hpnicfPortalPktStaAckAuthEstablish,Counter64,read-only,,current,,It shows the total number of the response to REQ-AUTH packet of portal server including error code 2 in the packet, that is the link is already established.
.1.3.6.1.4.1.11.2.14.11.15.2.99.5.5,HPN-ICF-PORTAL-MIB::hpnicfPortalPktStaAckAuthBusy,Counter64,read-only,,current,,It shows the total number of the response to REQ-AUTH packet of portal server including error code 3 in the packet, that is the system is busy.
.1.3.6.1.4.1.11.2.14.11.15.2.99.5.6,HPN-ICF-PORTAL-MIB::hpnicfPortalPktStaAckAuthAuthFail,Counter64,read-only,,current,,It shows the total number of the response to REQ-AUTH packet of portal server including error code 4 in the packet, that is authentication fail.
.1.3.6.1.4.1.11.2.14.11.15.2.99.5.7,HPN-ICF-PORTAL-MIB::hpnicfPortalPktStaReqChallengeNum,Counter64,read-only,,current,,It shows the total number of portal challenge requests from the portal server.
.1.3.6.1.4.1.11.2.14.11.15.2.99.5.8,HPN-ICF-PORTAL-MIB::hpnicfPortalPktStaAckChallengeSuccess,Counter64,read-only,,current,,It shows the total number of the response to challenge packet of portal server including error code 0 in the packet, that is challenge is success.
.1.3.6.1.4.1.11.2.14.11.15.2.99.5.9,HPN-ICF-PORTAL-MIB::hpnicfPortalPktStaAckChallengeReject,Counter64,read-only,,current,,It shows the total number of the response to challenge packet of portal server including error code 1 in the packet, that is challenge is rejected by server.
.1.3.6.1.4.1.11.2.14.11.15.2.99.5.10,HPN-ICF-PORTAL-MIB::hpnicfPortalPktStaAckChallengeEstablish,Counter64,read-only,,current,,It shows the total number of the response to challenge packet of portal server including error code 2 in the packet, that is the link is alreadys established.
.1.3.6.1.4.1.11.2.14.11.15.2.99.5.11,HPN-ICF-PORTAL-MIB::hpnicfPortalPktStaAckChallengeBusy,Counter64,read-only,,current,,It shows the total number of the response to challenge packet of portal server including error code 3 in the packet, that is the system is busy.
.1.3.6.1.4.1.11.2.14.11.15.2.99.5.12,HPN-ICF-PORTAL-MIB::hpnicfPortalPktStaAckChallengeAuthFail,Counter64,read-only,,current,,It shows the total number of the response to challenge packet of portal server including error code 4 in the packet, that is authentication fail.
.1.3.6.1.4.1.11.2.14.11.15.2.100,HPN-ICF-OID-MIB::hpnicflldp,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.2.100.1,HPN-ICF-LLDP-EXT-MIB::hpnicflldpObjects,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.2.100.1.1,HPN-ICF-LLDP-EXT-MIB::hpnicflldpConfiguration,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.2.100.1.1.1,HPN-ICF-LLDP-EXT-MIB::hpnicflldpAdminStatus,INTEGER,read-write,,current,true(1):false(2),The global administratively desired status of the local LLDP agent.
.1.3.6.1.4.1.11.2.14.11.15.2.100.1.1.2,HPN-ICF-LLDP-EXT-MIB::hpnicflldpComplianceCDPStatus,INTEGER,read-write,,current,true(1):false(2),The global administratively desired status of CDP Compliance.
.1.3.6.1.4.1.11.2.14.11.15.2.100.1.1.3,HPN-ICF-LLDP-EXT-MIB::hpnicflldpPortConfigTable,,not-accessible,,current,,The port-based table that controls extended functions.
.1.3.6.1.4.1.11.2.14.11.15.2.100.1.1.3.1,HPN-ICF-LLDP-EXT-MIB::hpnicflldpPortConfigEntry,,not-accessible,hpnicflldpPortConfigPortNum,current,,LLDP extended configuration information for a particular port. This co- nfiguration parameter controls compliance with other non-standard link  layer discovery protocol such as CDP.
.1.3.6.1.4.1.11.2.14.11.15.2.100.1.1.3.1.1,HPN-ICF-LLDP-EXT-MIB::hpnicflldpPortConfigPortNum,Integer32,not-accessible,,current,,The index value used to identify the port component associated with th- is entry.
.1.3.6.1.4.1.11.2.14.11.15.2.100.1.1.3.1.2,HPN-ICF-LLDP-EXT-MIB::hpnicflldpPortConfigCDPComplianceStatus,INTEGER,read-write,,current,txAndRx(1):disabled(2),The administratively desired CDP Compliance status of the local LLDP a- gent. If the associated hpnicflldpPortConfigCDPComplianceStatus object has  a value of 'txAndRx', then the LLDP agent will receive CDP frames on th- is port, and will transmit CDP frames only after receive a CDP frames.  If the associated lldpPortConfigAdminStatus object has a value of 'disa- bled', LLDP agent will not transmit or receive CDP frames on this port.
.1.3.6.1.4.1.11.2.14.11.15.2.101,HPN-ICF-OID-MIB::hpnicfDHCPServer,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.2.101.1,HPN-ICF-DHCP-SERVER-MIB::hpnicfDHCPServerObjects,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.2.101.1.1,HPN-ICF-DHCP-SERVER-MIB::hpnicfDHCPServerIPPoolUsage,Integer32,read-only,,current,,Usage factor of DHCP server ip pool.
.1.3.6.1.4.1.11.2.14.11.15.2.101.1.2,HPN-ICF-DHCP-SERVER-MIB::hpnicfDHCPServerReqTimes,Counter32,read-only,,current,,Number of requests received by the DHCP server.
.1.3.6.1.4.1.11.2.14.11.15.2.101.1.3,HPN-ICF-DHCP-SERVER-MIB::hpnicfDHCPServerReqSuccessTimes,Counter32,read-only,,current,,Number of requests success responses sent by the DHCP server.
.1.3.6.1.4.1.11.2.14.11.15.2.101.1.4,HPN-ICF-DHCP-SERVER-MIB::hpnicfDHCPServerAvgIpUseThreshold,Integer32,read-write,,current,,Threshold of average IP usage of a DHCP server pool in 5 minutes.
.1.3.6.1.4.1.11.2.14.11.15.2.101.1.5,HPN-ICF-DHCP-SERVER-MIB::hpnicfDHCPServerMaxIpUseThreshold,Integer32,read-write,,current,,Threshold of maximum IP usage of a DHCP server pool in 5 minutes.
.1.3.6.1.4.1.11.2.14.11.15.2.101.1.6,HPN-ICF-DHCP-SERVER-MIB::hpnicfDHCPServerAllocateThreshold,Integer32,read-write,,current,,Threshold of DHCP server allocated IP address in 5 minutes.
.1.3.6.1.4.1.11.2.14.11.15.2.101.2,HPN-ICF-DHCP-SERVER-MIB::hpnicfDHCPServerTables,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.2.101.2.1,HPN-ICF-DHCP-SERVER-MIB::hpnicfDHCPServerPoolName,OCTET,accessible-for-notify,,current,,DHCP server pool name.
.1.3.6.1.4.1.11.2.14.11.15.2.101.2.2,HPN-ICF-DHCP-SERVER-MIB::hpnicfDHCPSrvGlobalPoolTable,,not-accessible,,current,,A table for creating DHCP server global pools.
.1.3.6.1.4.1.11.2.14.11.15.2.101.2.2.1,HPN-ICF-DHCP-SERVER-MIB::hpnicfDHCPSrvGlobalPoolEntry,,not-accessible,hpnicfDHCPSrvGlobalPoolName,current,,An entry containing objects for creating or deleting a global pool for the DHCP server.
.1.3.6.1.4.1.11.2.14.11.15.2.101.2.2.1.1,HPN-ICF-DHCP-SERVER-MIB::hpnicfDHCPSrvGlobalPoolName,OCTET,read-only,,current,,DHCP server global pool name.
.1.3.6.1.4.1.11.2.14.11.15.2.101.2.2.1.2,HPN-ICF-DHCP-SERVER-MIB::hpnicfDHCPSrvGlobalPoolRowStatus,INTEGER,read-create,,current,active(1):notInService(2):notReady(3):createAndGo(4):createAndWait(5):destroy(6),RowStatus. Three actions are used: active, createAndGo, destroy.
.1.3.6.1.4.1.11.2.14.11.15.2.101.2.3,HPN-ICF-DHCP-SERVER-MIB::hpnicfDHCPSrvGlobalPoolConfigTable,,not-accessible,,current,,A table containing the configurations of dhcp server global pools.
.1.3.6.1.4.1.11.2.14.11.15.2.101.2.3.1,HPN-ICF-DHCP-SERVER-MIB::hpnicfDHCPSrvGlobalPoolConfigEntry,,not-accessible,hpnicfDHCPSrvGlobalPoolName,current,,An entry containing the objects for configuring the network ip or host ip etc. to global pools for DHCP server.
.1.3.6.1.4.1.11.2.14.11.15.2.101.2.3.1.1,HPN-ICF-DHCP-SERVER-MIB::hpnicfDHCPSrvGlobalPoolType,INTEGER,read-write,,current,null(0):host(1):network(2),Type of a DHCP global pool. Any operations of this object will be bound with the operations of hpnicfDHCPSrvGlobalPoolNetwork, hpnicfDHCPSrvGlobalPoolHostIPAddr, or hpnicfDHCPSrvGlobalPoolHostHAddr. That means any operation of this object alone will be regarded as invalid operation.
.1.3.6.1.4.1.11.2.14.11.15.2.101.2.3.1.2,HPN-ICF-DHCP-SERVER-MIB::hpnicfDHCPSrvGlobalPoolNetwork,IpAddress,read-write,,current,,Network ip of a DHCP global pool. To delete a configured network ip, please set hpnicfDHCPSrvGlobalPoolCfgUndoFlag to 1.
.1.3.6.1.4.1.11.2.14.11.15.2.101.2.3.1.3,HPN-ICF-DHCP-SERVER-MIB::hpnicfDHCPSrvGlobalPoolNetworkMask,IpAddress,read-write,,current,,Net mask of a DHCP global pool(network). The SET operation to this object ought to be with the SET of hpnicfDHCPSrvGlobalPoolNetwork together, and any SET operation alone to this object will be regarded as an invalid operation. When a network ip of a DHCP global pool was deleted, the net mask would also be deleted automatically, and no further operation needed.
.1.3.6.1.4.1.11.2.14.11.15.2.101.2.3.1.4,HPN-ICF-DHCP-SERVER-MIB::hpnicfDHCPSrvGlobalPoolHostIPAddr,IpAddress,read-write,,current,,Host ip of a DHCP global pool. To delete a configured network ip, please set hpnicfDHCPSrvGlobalPoolCfgUndoFlag to 2.
.1.3.6.1.4.1.11.2.14.11.15.2.101.2.3.1.5,HPN-ICF-DHCP-SERVER-MIB::hpnicfDHCPSrvGlobalPoolHostMask,IpAddress,read-write,,current,,Net mask of a DHCP global pool(host) The SET operation to this object ought to be with the SET of hpnicfDHCPSrvGlobalPoolHostIPAddr together, and any SET operation alone to this object will be regarded as an invalid operation. When a host ip of a DHCP global pool was deleted, the net mask would also be deleted automatically, and no further operation needed.
.1.3.6.1.4.1.11.2.14.11.15.2.101.2.3.1.6,HPN-ICF-DHCP-SERVER-MIB::hpnicfDHCPSrvGlobalPoolHostHAddr,OCTET,read-write,,current,,Hardware address of a DHCP global pool(host). To delete a configured hardware address, please set hpnicfDHCPSrvGlobalPoolCfgUndoFlag to 3.
.1.3.6.1.4.1.11.2.14.11.15.2.101.2.3.1.7,HPN-ICF-DHCP-SERVER-MIB::hpnicfDHCPSrvGlobalPoolCfgUndoFlag,INTEGER,read-write,,current,undonetworkip(1):undohostip(2):undohosthaddr(3),Flag of undo operation for hpnicfDHCPSrvGlobalPoolConfigTable.
.1.3.6.1.4.1.11.2.14.11.15.2.101.2.3.1.8,HPN-ICF-DHCP-SERVER-MIB::hpnicfDHCPSrvGlobalPoolStartAddr,IpAddress,read-write,,current,,Start IP of a DHCP global pool. To delete a configured start IP, please set hpnicfDHCPSrvGlobalPoolStartAddr to 0. It takes effect only when hpnicfDHCPSrvGlobalPoolNetwork is set.
.1.3.6.1.4.1.11.2.14.11.15.2.101.2.3.1.9,HPN-ICF-DHCP-SERVER-MIB::hpnicfDHCPSrvGlobalPoolEndAddr,IpAddress,read-write,,current,,End ip of a DHCP global pool.
.1.3.6.1.4.1.11.2.14.11.15.2.101.2.4,HPN-ICF-DHCP-SERVER-MIB::hpnicfDHCPSrvGlobalPoolParaTable,,not-accessible,,current,,A table for configuring parameters to DHCP global pools.
.1.3.6.1.4.1.11.2.14.11.15.2.101.2.4.1,HPN-ICF-DHCP-SERVER-MIB::hpnicfDHCPSrvGlobalPoolParaEntry,,not-accessible,hpnicfDHCPSrvGlobalPoolName,current,,An entry containing the objects for the configurations of parameters of DHCP global pools.
.1.3.6.1.4.1.11.2.14.11.15.2.101.2.4.1.1,HPN-ICF-DHCP-SERVER-MIB::hpnicfDHCPSrvGlbPoolLeaseDay,Integer32,read-write,,current,,Number of days of the lease.
.1.3.6.1.4.1.11.2.14.11.15.2.101.2.4.1.2,HPN-ICF-DHCP-SERVER-MIB::hpnicfDHCPSrvGlbPoolLeaseHour,Integer32,read-write,,current,,Number of hours of the lease.
.1.3.6.1.4.1.11.2.14.11.15.2.101.2.4.1.3,HPN-ICF-DHCP-SERVER-MIB::hpnicfDHCPSrvGlbPoolLeaseMinute,Integer32,read-write,,current,,Number of minutes of the lease.
.1.3.6.1.4.1.11.2.14.11.15.2.101.2.4.1.4,HPN-ICF-DHCP-SERVER-MIB::hpnicfDHCPSrvGlbPoolLeaseUnlimited,INTEGER,read-write,,current,invalid(0):unlimited(1),A flag denoting if the lease of a pool is unlimited.
.1.3.6.1.4.1.11.2.14.11.15.2.101.2.4.1.5,HPN-ICF-DHCP-SERVER-MIB::hpnicfDHCPSrvGlbPoolDomainName,OCTET,read-write,,current,,Domain name for DHCP clients.
.1.3.6.1.4.1.11.2.14.11.15.2.101.2.4.1.6,HPN-ICF-DHCP-SERVER-MIB::hpnicfDHCPSrvGlbPoolCliGWIPStr,OCTET,read-write,,current,,String of gateway ip addresses for DHCP clients. Since mostly 8 ip can be configured for a pool totally, a string is defined to get or configure 8 ip ip at a time.
.1.3.6.1.4.1.11.2.14.11.15.2.101.2.4.1.7,HPN-ICF-DHCP-SERVER-MIB::hpnicfDHCPSrvGlbPoolCliGWIPUndo,IpAddress,read-write,,current,,A gateway ip address to delete. This object is only for deleting a given ip of gateway router.
.1.3.6.1.4.1.11.2.14.11.15.2.101.2.4.1.8,HPN-ICF-DHCP-SERVER-MIB::hpnicfDHCPSrvGlbPoolCliDNSIPStr,OCTET,read-write,,current,,String of DNS server ip addresses for DHCP clients. Since mostly 8 ip can be configured for a pool totally, a string is defined to get or configure 8 ip at a time.
.1.3.6.1.4.1.11.2.14.11.15.2.101.2.4.1.9,HPN-ICF-DHCP-SERVER-MIB::hpnicfDHCPSrvGlbPoolCliDNSIPUndo,IpAddress,read-write,,current,,A DNS server ip address to delete. This object is only for deleting a given ip of DNS server.
.1.3.6.1.4.1.11.2.14.11.15.2.101.2.4.1.10,HPN-ICF-DHCP-SERVER-MIB::hpnicfDHCPSrvGlbPoolCliNetbiosType,INTEGER,read-write,,current,null(0):bnode(1):pnode(2):mnode(4):hnode(8),NetBios node type for DHCP clients.
.1.3.6.1.4.1.11.2.14.11.15.2.101.2.4.1.11,HPN-ICF-DHCP-SERVER-MIB::hpnicfDHCPSrvGlbPoolCliNbnsIPStr,OCTET,read-write,,current,,String of NetBios server ip addresses for DHCP clients. Since mostly 8 ip can be configured for a pool totally, so a string is defined to get or configure 8 ip at a time.
.1.3.6.1.4.1.11.2.14.11.15.2.101.2.4.1.12,HPN-ICF-DHCP-SERVER-MIB::hpnicfDHCPSrvGlbPoolCliNbnsIPUndo,IpAddress,read-write,,current,,A NetBios server ip address to delete. This object is only for deleting a given ip of NetBios server.
.1.3.6.1.4.1.11.2.14.11.15.2.101.2.4.1.13,HPN-ICF-DHCP-SERVER-MIB::hpnicfDHCPSrvGlbPoolParaUndoFlag,INTEGER,read-write,,current,undoDomain(1):undoLease(2):undoGateway(3):undoDns(4):undoNbns(5):undoNbType(6),Flag of undo-operation for hpnicfDHCPSrvGlobalPoolParaTable.
.1.3.6.1.4.1.11.2.14.11.15.2.101.2.4.1.14,HPN-ICF-DHCP-SERVER-MIB::hpnicfDHCPSrvGlbPoolIPInUseReset,INTEGER,read-write,,current,reset(1),Reset the auto binding ip of the given global pool for DHCP server.
.1.3.6.1.4.1.11.2.14.11.15.2.101.2.4.1.15,HPN-ICF-DHCP-SERVER-MIB::hpnicfDHCPSrvGlbPoolLeaseTime,TimeTicks,read-write,,current,,Number of timeticks of the lease.
.1.3.6.1.4.1.11.2.14.11.15.2.101.2.4.1.16,HPN-ICF-DHCP-SERVER-MIB::hpnicfDHCPSrvGlbPoolPrimaryDNSIP,IpAddress,read-write,,current,,The Primary DNS server IP address to be assigned to the client. To delete a configured Primary DNS server IP, please set hpnicfDHCPSrvGlbPoolPrimaryDNSIP to 0. It takes effect only when hpnicfDHCPSrvGlobalPoolNetwork is set.
.1.3.6.1.4.1.11.2.14.11.15.2.101.2.4.1.17,HPN-ICF-DHCP-SERVER-MIB::hpnicfDHCPSrvGlbPoolSecondaryDNSIP,IpAddress,read-write,,current,,The Secondary DNS server IP address to be assigned to the client. To delete a configured Secondary DNS server IP, please set hpnicfDHCPSrvGlbPoolSecondaryDNSIP to 0. It takes effect only when hpnicfDHCPSrvGlobalPoolNetwork is set.
.1.3.6.1.4.1.11.2.14.11.15.2.101.2.4.1.18,HPN-ICF-DHCP-SERVER-MIB::hpnicfDHCPSrvGlbPoolLeaseSecond,Integer32,read-write,,current,,Number of seconds of the lease.
.1.3.6.1.4.1.11.2.14.11.15.2.101.2.5,HPN-ICF-DHCP-SERVER-MIB::hpnicfDHCPSrvGlobalPoolOptionTable,,not-accessible,,current,,A table for configuring options to DHCP global pools.
.1.3.6.1.4.1.11.2.14.11.15.2.101.2.5.1,HPN-ICF-DHCP-SERVER-MIB::hpnicfDHCPSrvGlobalPoolOptionEntry,,not-accessible,hpnicfDHCPSrvGlobalPoolName:hpnicfDHCPSrvGlbPoolOptCode,current,,An entry containing the objects for configuring options to DHCP global pools.
.1.3.6.1.4.1.11.2.14.11.15.2.101.2.5.1.1,HPN-ICF-DHCP-SERVER-MIB::hpnicfDHCPSrvGlbPoolOptCode,Integer32,read-only,,current,,Option code.
.1.3.6.1.4.1.11.2.14.11.15.2.101.2.5.1.2,HPN-ICF-DHCP-SERVER-MIB::hpnicfDHCPSrvGlbPoolOptType,INTEGER,read-create,,current,ascii(1):hex(2):ip(3),Option type.
.1.3.6.1.4.1.11.2.14.11.15.2.101.2.5.1.3,HPN-ICF-DHCP-SERVER-MIB::hpnicfDHCPSrvGlbPoolOptAscii,OCTET,read-create,,current,,Ascii string of an option.
.1.3.6.1.4.1.11.2.14.11.15.2.101.2.5.1.4,HPN-ICF-DHCP-SERVER-MIB::hpnicfDHCPSrvGlbPoolOptHexString,OCTET,read-create,,current,,Hex string of an option. 1st to 16th hex strings, which are 2 bytes, 4 bytes, 6 bytes or 8 bytes, can be configured at most simultaneously. That means the format of each string must be '12', '1234', '123456' or '12345678'.
.1.3.6.1.4.1.11.2.14.11.15.2.101.2.5.1.5,HPN-ICF-DHCP-SERVER-MIB::hpnicfDHCPSrvGlbPoolOptIPString,OCTET,read-create,,current,,IP string of an option. 1 to 8 ip addresses can be configured at most simultaneously.
.1.3.6.1.4.1.11.2.14.11.15.2.101.2.5.1.6,HPN-ICF-DHCP-SERVER-MIB::hpnicfDHCPSrvGlbPoolOptRowStatus,INTEGER,read-create,,current,active(1):notInService(2):notReady(3):createAndGo(4):createAndWait(5):destroy(6),RowStatus. Three actions are used: active, createAndGo, destroy.
.1.3.6.1.4.1.11.2.14.11.15.2.101.2.6,HPN-ICF-DHCP-SERVER-MIB::hpnicfDHCPSrvGlobalPoolStatTable,,not-accessible,,current,,The statistics of each DHCP address pool.
.1.3.6.1.4.1.11.2.14.11.15.2.101.2.6.1,HPN-ICF-DHCP-SERVER-MIB::hpnicfDHCPSrvGlobalPoolStatEntry,,not-accessible,hpnicfDHCPSrvGlobalPoolName,current,,An entry containing the statistics of each DHCP address pool.
.1.3.6.1.4.1.11.2.14.11.15.2.101.2.6.1.1,HPN-ICF-DHCP-SERVER-MIB::hpnicfDHCPSrvGlbPoolIPPoolUsage,Integer32,read-only,,current,,Utilization rate of IP addresses in each DHCP address pool, in percentage.
.1.3.6.1.4.1.11.2.14.11.15.2.101.2.6.1.2,HPN-ICF-DHCP-SERVER-MIB::hpnicfDHCPSrvGlbPoolReqTimes,Counter32,read-only,,current,,Number of request packets received by each DHCP address pool, including the request packets for an extension of the lease.
.1.3.6.1.4.1.11.2.14.11.15.2.101.2.6.1.3,HPN-ICF-DHCP-SERVER-MIB::hpnicfDHCPSrvGlbPoolSuccessTimes,Counter32,read-only,,current,,Number of positive responses sent by each DHCP address pool, including responses to the request for an extension of the lease.
.1.3.6.1.4.1.11.2.14.11.15.2.101.2.6.1.4,HPN-ICF-DHCP-SERVER-MIB::hpnicfDHCPSrvGlbPoolDiscoverTimes,Counter32,read-only,,current,,Number of discover packets received by each DHCP address pool.
.1.3.6.1.4.1.11.2.14.11.15.2.101.2.6.1.5,HPN-ICF-DHCP-SERVER-MIB::hpnicfDHCPSrvGlbPoolOfferTimes,Counter32,read-only,,current,,Number of offer packets sent by each DHCP address pool.
.1.3.6.1.4.1.11.2.14.11.15.2.101.2.6.1.6,HPN-ICF-DHCP-SERVER-MIB::hpnicfDHCPSrvGlbPoolACKTimes,Counter32,read-only,,current,,Number of ACK packets sent by each DHCP address pool.
.1.3.6.1.4.1.11.2.14.11.15.2.101.2.6.1.7,HPN-ICF-DHCP-SERVER-MIB::hpnicfDHCPSrvGlbPoolTotalIpNum,Counter32,read-only,,current,,Number of IP addresses in each DHCP address pool.
.1.3.6.1.4.1.11.2.14.11.15.2.101.2.6.1.8,HPN-ICF-DHCP-SERVER-MIB::hpnicfDHCPSrvGlbPoolInUsedIpNum,Counter32,read-only,,current,,Number of allocated IP addresses in each DHCP address pool.
.1.3.6.1.4.1.11.2.14.11.15.2.101.2.7,HPN-ICF-DHCP-SERVER-MIB::hpnicfDHCPSvrOptionGroupTable,,not-accessible,,current,,A table for creating DHCP server global option groups.
.1.3.6.1.4.1.11.2.14.11.15.2.101.2.7.1,HPN-ICF-DHCP-SERVER-MIB::hpnicfDHCPSvrOptionGroupEntry,,not-accessible,hpnicfDHCPSvrOptionGroupIndex,current,,An entry containing objects for creating or deleting a global option group.
.1.3.6.1.4.1.11.2.14.11.15.2.101.2.7.1.1,HPN-ICF-DHCP-SERVER-MIB::hpnicfDHCPSvrOptionGroupIndex,Integer32,read-only,,current,,The global option group index.
.1.3.6.1.4.1.11.2.14.11.15.2.101.2.7.1.2,HPN-ICF-DHCP-SERVER-MIB::hpnicfDHCPSvrOptionGroupRowstatus,INTEGER,read-create,,current,active(1):notInService(2):notReady(3):createAndGo(4):createAndWait(5):destroy(6),RowStatus. Three actions are used: active, createAndGo, destroy.
.1.3.6.1.4.1.11.2.14.11.15.2.101.2.8,HPN-ICF-DHCP-SERVER-MIB::hpnicfDHCPSvrOptionTable,,not-accessible,,current,,A table for configuring options in a global option group.
.1.3.6.1.4.1.11.2.14.11.15.2.101.2.8.1,HPN-ICF-DHCP-SERVER-MIB::hpnicfDHCPSvrOptionEntry,,not-accessible,hpnicfDHCPSvrOptionGroupIndex:hpnicfDHCPSvrOptionCode,current,,An entry containing objects for configuring an option in a global option group.
.1.3.6.1.4.1.11.2.14.11.15.2.101.2.8.1.1,HPN-ICF-DHCP-SERVER-MIB::hpnicfDHCPSvrOptionCode,Integer32,read-only,,current,,Option code.
.1.3.6.1.4.1.11.2.14.11.15.2.101.2.8.1.2,HPN-ICF-DHCP-SERVER-MIB::hpnicfDHCPSvrOptionType,INTEGER,read-create,,current,ascii(1):hex(2):ip(3),Option type.
.1.3.6.1.4.1.11.2.14.11.15.2.101.2.8.1.3,HPN-ICF-DHCP-SERVER-MIB::hpnicfDHCPSvrOptionAsciiString,OCTET,read-create,,current,,Ascii string of an option.
.1.3.6.1.4.1.11.2.14.11.15.2.101.2.8.1.4,HPN-ICF-DHCP-SERVER-MIB::hpnicfDHCPSvrOptionHexString,OCTET,read-create,,current,,Hex string of an option. 1 to 16 hex strings, which are 2 bytes, 4 bytes, 6 bytes or 8 bytes, can be configured at most simultaneously. That means the format of each string must be '12', '1234', '123456' or '12345678'.
.1.3.6.1.4.1.11.2.14.11.15.2.101.2.8.1.5,HPN-ICF-DHCP-SERVER-MIB::hpnicfDHCPSvrOptionIPString,OCTET,read-create,,current,,Ip string of an option. 1 to 8 ip addresses can be configured at most simultaneously.
.1.3.6.1.4.1.11.2.14.11.15.2.101.2.8.1.6,HPN-ICF-DHCP-SERVER-MIB::hpnicfDHCPSvrOptionRowstatus,INTEGER,read-create,,current,active(1):notInService(2):notReady(3):createAndGo(4):createAndWait(5):destroy(6),RowStatus. Three actions are used: active, createAndGo, destroy.
.1.3.6.1.4.1.11.2.14.11.15.2.101.2.9,HPN-ICF-DHCP-SERVER-MIB::hpnicfDHCPSvrVerifyMacTable,,not-accessible,,current,,A table containing the verifying switches status for pools.
.1.3.6.1.4.1.11.2.14.11.15.2.101.2.9.1,HPN-ICF-DHCP-SERVER-MIB::hpnicfDHCPSvrVerifyMacEntry,,not-accessible,hpnicfDHCPSrvGlobalPoolName,current,,An entry containing the switch status for a pool.
.1.3.6.1.4.1.11.2.14.11.15.2.101.2.9.1.1,HPN-ICF-DHCP-SERVER-MIB::hpnicfDHCPSvrVerifyMacSwitch,INTEGER,read-write,,current,enabled(1):disabled(2),The switch status for this pool. It has two defined values: enabled and disabled. If the value is enabled, the DHCP server only allocates IP address to host in the MAC list. The default value is disabled.
.1.3.6.1.4.1.11.2.14.11.15.2.101.2.10,HPN-ICF-DHCP-SERVER-MIB::hpnicfDHCPSvrPoolMacTable,,not-accessible,,current,,A table containing the MAC addresses list for pools.
.1.3.6.1.4.1.11.2.14.11.15.2.101.2.10.1,HPN-ICF-DHCP-SERVER-MIB::hpnicfDHCPSvrPoolMacEntry,,not-accessible,hpnicfDHCPSrvGlobalPoolName:hpnicfDHCPSvrPoolMac:hpnicfDHCPSvrPoolMacMask,current,,An entry containing a MAC address and a mask.
.1.3.6.1.4.1.11.2.14.11.15.2.101.2.10.1.1,HPN-ICF-DHCP-SERVER-MIB::hpnicfDHCPSvrPoolMac,OCTET,read-only,,current,,MAC address.
.1.3.6.1.4.1.11.2.14.11.15.2.101.2.10.1.2,HPN-ICF-DHCP-SERVER-MIB::hpnicfDHCPSvrPoolMacMask,OCTET,read-only,,current,,Mask for MAC address.
.1.3.6.1.4.1.11.2.14.11.15.2.101.2.10.1.3,HPN-ICF-DHCP-SERVER-MIB::hpnicfDHCPSvrPoolMacOptIndex,Integer32,read-write,,current,,Option group index binding for the MAC address.
.1.3.6.1.4.1.11.2.14.11.15.2.101.2.10.1.4,HPN-ICF-DHCP-SERVER-MIB::hpnicfDHCPSvrPoolMacRowstatus,INTEGER,read-create,,current,active(1):notInService(2):notReady(3):createAndGo(4):createAndWait(5):destroy(6),RowStatus. Three actions are used: active, createAndGo, destroy.
.1.3.6.1.4.1.11.2.14.11.15.2.101.3,HPN-ICF-DHCP-SERVER-MIB::hpnicfDHCPServerTraps,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.2.101.3.0,HPN-ICF-DHCP-SERVER-MIB::hpnicfDHCPServerTrapPrefix,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.2.101.3.0.1,HPN-ICF-DHCP-SERVER-MIB::hpnicfDHCPServerAddrExhaust,,,,,,This trap is generated when the device DHCP server address exhaust.
.1.3.6.1.4.1.11.2.14.11.15.2.101.3.0.2,HPN-ICF-DHCP-SERVER-MIB::hpnicfDHCPServerAddrExhaustRecover,,,,,,This trap is generated when the device DHCP server address exhaust recover.
.1.3.6.1.4.1.11.2.14.11.15.2.101.3.0.3,HPN-ICF-DHCP-SERVER-MIB::hpnicfDHCPServerAvgIpUsageOverflow,,,,,,This trap is generated when the average IP address usage of DHCP server pool in 5 minutes overflows.
.1.3.6.1.4.1.11.2.14.11.15.2.101.3.0.4,HPN-ICF-DHCP-SERVER-MIB::hpnicfDHCPServerMaxIpUsageOverflow,,,,,,This trap is generated when the maximum IP address usage of DHCP server pool in 5 minutes overflows.
.1.3.6.1.4.1.11.2.14.11.15.2.101.3.0.5,HPN-ICF-DHCP-SERVER-MIB::hpnicfDHCPServerAllocateOverflow,,,,,,This trap is generated when the number of DHCP server allocated IP address in 5 minutes overflows.
.1.3.6.1.4.1.11.2.14.11.15.2.101.3.1,HPN-ICF-DHCP-SERVER-MIB::hpnicfDHCPServerTrapObjects,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.2.101.3.1.1,HPN-ICF-DHCP-SERVER-MIB::hpnicfDHCPServerFirstTrapTime,TimeTicks,accessible-for-notify,,current,,Represents the first trap time.
.1.3.6.1.4.1.11.2.14.11.15.2.102,HPN-ICF-OID-MIB::hpnicfPPPoEServer,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.2.102.1,HPN-ICF-PPPOE-SERVER-MIB::hpnicfPPPoEServerObject,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.2.102.1.1,HPN-ICF-PPPOE-SERVER-MIB::hpnicfPPPoEServerMaxSessions,Integer32,read-only,,current,,The maximum sessions supported by PPPoE server.
.1.3.6.1.4.1.11.2.14.11.15.2.102.1.2,HPN-ICF-PPPOE-SERVER-MIB::hpnicfPPPoEServerCurrSessions,Integer32,read-only,,current,,The number of current sessions on the PPPoE server.
.1.3.6.1.4.1.11.2.14.11.15.2.102.1.3,HPN-ICF-PPPOE-SERVER-MIB::hpnicfPPPoEServerAuthRequests,Counter32,read-only,,current,,The number of authentication requests.
.1.3.6.1.4.1.11.2.14.11.15.2.102.1.4,HPN-ICF-PPPOE-SERVER-MIB::hpnicfPPPoEServerAuthSuccesses,Counter32,read-only,,current,,The number of authentication succeses.
.1.3.6.1.4.1.11.2.14.11.15.2.102.1.5,HPN-ICF-PPPOE-SERVER-MIB::hpnicfPPPoEServerAuthFailures,Counter32,read-only,,current,,The number of authentication failure.
.1.3.6.1.4.1.11.2.14.11.15.2.102.1.6,HPN-ICF-PPPOE-SERVER-MIB::hpnicfPPPoESAbnormOffsThreshold,Integer32,read-write,,current,,The threshold of abnormal offline count.
.1.3.6.1.4.1.11.2.14.11.15.2.102.1.7,HPN-ICF-PPPOE-SERVER-MIB::hpnicfPPPoESAbnormOffPerThreshold,Integer32,read-write,,current,,The threshold of abnormal offline percent.
.1.3.6.1.4.1.11.2.14.11.15.2.102.1.8,HPN-ICF-PPPOE-SERVER-MIB::hpnicfPPPoESNormOffPerThreshold,Integer32,read-write,,current,,The threshold of normal offline percent.
.1.3.6.1.4.1.11.2.14.11.15.2.102.2,HPN-ICF-PPPOE-SERVER-MIB::hpnicfPPPoEServerTraps,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.2.102.2.0,HPN-ICF-PPPOE-SERVER-MIB::hpnicfPPPoeServerTrapPrefix,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.2.102.2.0.1,HPN-ICF-PPPOE-SERVER-MIB::hpnicfPPPoESAbnormOffsAlarm,,,,,,This trap is generated when the PPPoE server abnormal offline counts over threshold in five minutes.
.1.3.6.1.4.1.11.2.14.11.15.2.102.2.0.2,HPN-ICF-PPPOE-SERVER-MIB::hpnicfPPPoESAbnormOffPerAlarm,,,,,,This trap is generated when the PPPoE server abnormal offline percent over threshold in five minutes.
.1.3.6.1.4.1.11.2.14.11.15.2.102.2.0.3,HPN-ICF-PPPOE-SERVER-MIB::hpnicfPPPoESNormOffPerAlarm,,,,,,This trap is generated when the PPPoE server normal offline percent under threshold in five minutes.
.1.3.6.1.4.1.11.2.14.11.15.2.103,HPN-ICF-OID-MIB::hpnicfL2Isolate,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.2.103.1,HPN-ICF-L2ISOLATE-MIB::hpnicfL2IsolateObject,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.2.103.1.1,HPN-ICF-L2ISOLATE-MIB::hpnicfL2IsolateEnableTable,,not-accessible,,current,,A table for enabling/disabling layer-2-isolate for VLAN.
.1.3.6.1.4.1.11.2.14.11.15.2.103.1.1.1,HPN-ICF-L2ISOLATE-MIB::hpnicfL2IsolateEnableEntry,,not-accessible,hpnicfL2IsolateVLANIndex,current,,An entry for enabling/disabling layer-2-isolate for VLAN.
.1.3.6.1.4.1.11.2.14.11.15.2.103.1.1.1.1,HPN-ICF-L2ISOLATE-MIB::hpnicfL2IsolateVLANIndex,Integer32,not-accessible,,current,,Represents index of VLAN for layer-2-isolate.
.1.3.6.1.4.1.11.2.14.11.15.2.103.1.1.1.2,HPN-ICF-L2ISOLATE-MIB::hpnicfL2IsolateEnable,INTEGER,read-write,,current,true(1):false(2),Represents the layer-2-isolate status of VLAN.
.1.3.6.1.4.1.11.2.14.11.15.2.103.1.2,HPN-ICF-L2ISOLATE-MIB::hpnicfL2IsolatePermitMACTable,,not-accessible,,current,,A table represents the permitting MAC address for the specific VLAN.
.1.3.6.1.4.1.11.2.14.11.15.2.103.1.2.1,HPN-ICF-L2ISOLATE-MIB::hpnicfL2IsolatePermitMACEntry,,not-accessible,hpnicfL2IsolateVLANIndex:hpnicfL2IsoLatePermitMAC,current,,Each entry represents the permitting MAC address for the specific VLAN.
.1.3.6.1.4.1.11.2.14.11.15.2.103.1.2.1.1,HPN-ICF-L2ISOLATE-MIB::hpnicfL2IsoLatePermitMAC,OCTET,not-accessible,,current,,Represents the MAC address permitted in the VLAN.
.1.3.6.1.4.1.11.2.14.11.15.2.103.1.2.1.2,HPN-ICF-L2ISOLATE-MIB::hpnicfL2IsoLatePermitMACRowStatus,INTEGER,read-create,,current,active(1):notInService(2):notReady(3):createAndGo(4):createAndWait(5):destroy(6),RowStatus. Three actions are used: active, CreateAndGo, destroy.
.1.3.6.1.4.1.11.2.14.11.15.2.104,HPN-ICF-OID-MIB::hpnicfSnmpExt,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.2.104.1,HPN-ICF-SNMP-EXT-MIB::hpnicfSnmpExtScalarObjects,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.2.104.1.1,HPN-ICF-SNMP-EXT-MIB::hpnicfSnmpExtSnmpChannel,Integer32,read-write,,current,,The channel number used by SNMP.
.1.3.6.1.4.1.11.2.14.11.15.2.104.1.2,HPN-ICF-SNMP-EXT-MIB::hpnicfSnmpExtReadCommunitySingle,OCTET,read-write,,current,,The first read community.
.1.3.6.1.4.1.11.2.14.11.15.2.104.1.3,HPN-ICF-SNMP-EXT-MIB::hpnicfSnmpExtWriteCommunitySingle,OCTET,read-write,,current,,The first write community.
.1.3.6.1.4.1.11.2.14.11.15.2.104.1.4,HPN-ICF-SNMP-EXT-MIB::hpnicfSnmpExtMaxContextNum,Integer32,read-only,,current,,The maximum number of contexts.
.1.3.6.1.4.1.11.2.14.11.15.2.104.2,HPN-ICF-SNMP-EXT-MIB::hpnicfSnmpExtTables,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.2.104.2.1,HPN-ICF-SNMP-EXT-MIB::hpnicfSnmpExtCommunityTable,,not-accessible,,current,,Modify the extended properties of SNMP community or user.
.1.3.6.1.4.1.11.2.14.11.15.2.104.2.1.1,HPN-ICF-SNMP-EXT-MIB::hpnicfSnmpExtCommunityEntry,,not-accessible,hpnicfSnmpExtCommunitySecurityLevel:hpnicfSnmpExtCommunitySecurityName,current,,The entry of hpnicfSnmpExtCommunityTable.
.1.3.6.1.4.1.11.2.14.11.15.2.104.2.1.1.1,HPN-ICF-SNMP-EXT-MIB::hpnicfSnmpExtCommunitySecurityLevel,INTEGER,not-accessible,,current,,The Security Model of the specified community or user. This object may not take the 'any' (0) value.
.1.3.6.1.4.1.11.2.14.11.15.2.104.2.1.1.2,HPN-ICF-SNMP-EXT-MIB::hpnicfSnmpExtCommunitySecurityName,OCTET,not-accessible,,current,,The Security Name of the specified community or user.
.1.3.6.1.4.1.11.2.14.11.15.2.104.2.1.1.3,HPN-ICF-SNMP-EXT-MIB::hpnicfSnmpExtCommunityName,OCTET,read-only,,current,,The specified community name.
.1.3.6.1.4.1.11.2.14.11.15.2.104.2.1.1.4,HPN-ICF-SNMP-EXT-MIB::hpnicfSnmpExtCommunityAclNum,Integer32,read-write,,current,,The specified ACL (Access Control List) number used by the community or the user.
.1.3.6.1.4.1.11.2.14.11.15.2.104.2.2,HPN-ICF-SNMP-EXT-MIB::hpnicfSnmpCommunityExTable,,not-accessible,,current,,Modify the extended properties of SNMP community.
.1.3.6.1.4.1.11.2.14.11.15.2.104.2.2.1,HPN-ICF-SNMP-EXT-MIB::hpnicfSnmpCommunityExEntry,,not-accessible,hpnicfSnmpCommunityExName,current,,The entry of hpnicfSnmpCommunityExTable.
.1.3.6.1.4.1.11.2.14.11.15.2.104.2.2.1.1,HPN-ICF-SNMP-EXT-MIB::hpnicfSnmpCommunityExName,OCTET,read-only,,current,,The specified community name.
.1.3.6.1.4.1.11.2.14.11.15.2.104.2.2.1.2,HPN-ICF-SNMP-EXT-MIB::hpnicfSnmpCommunityExWrite,INTEGER,read-create,,current,true(1):false(2),Represents the community can write or not. 'true' : the community can write. 'false': the community can read only.
.1.3.6.1.4.1.11.2.14.11.15.2.104.2.2.1.3,HPN-ICF-SNMP-EXT-MIB::hpnicfSnmpCommunityExViewName,OCTET,read-create,,current,,A family of view subtrees that the Community can operate.
.1.3.6.1.4.1.11.2.14.11.15.2.104.2.2.1.4,HPN-ICF-SNMP-EXT-MIB::hpnicfSnmpCommunityExAclNum,Integer32,read-create,,current,,The specified ACL (Access Control List) number used by the community.
.1.3.6.1.4.1.11.2.14.11.15.2.104.2.2.1.5,HPN-ICF-SNMP-EXT-MIB::hpnicfSnmpCommunityExRowStatus,INTEGER,read-create,,current,active(1):notInService(2):notReady(3):createAndGo(4):createAndWait(5):destroy(6),The status of this table entry.
.1.3.6.1.4.1.11.2.14.11.15.2.104.2.3,HPN-ICF-SNMP-EXT-MIB::hpnicfSnmpExtContextTable,,not-accessible,,current,,Modify the extended properties of SNMP context.
.1.3.6.1.4.1.11.2.14.11.15.2.104.2.3.1,HPN-ICF-SNMP-EXT-MIB::hpnicfSnmpExtContextEntry,,not-accessible,hpnicfSnmpExtContextName,current,,The entry of hpnicfSnmpExtContextTable.
.1.3.6.1.4.1.11.2.14.11.15.2.104.2.3.1.1,HPN-ICF-SNMP-EXT-MIB::hpnicfSnmpExtContextName,OCTET,not-accessible,,current,,The specified context name.
.1.3.6.1.4.1.11.2.14.11.15.2.104.2.3.1.2,HPN-ICF-SNMP-EXT-MIB::hpnicfSnmpExtContextRowStatus,INTEGER,read-create,,current,active(1):notInService(2):notReady(3):createAndGo(4):createAndWait(5):destroy(6),The status of this table entry.
.1.3.6.1.4.1.11.2.14.11.15.2.104.3,HPN-ICF-SNMP-EXT-MIB::hpnicfSnmpExtNotifications,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.2.105,HPN-ICF-OID-MIB::hpnicfVsi,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.2.105.1,HPN-ICF-VSI-MIB::hpnicfVsiObjects,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.2.105.1.1,HPN-ICF-VSI-MIB::hpnicfVsiScalarGroup,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.2.105.1.1.1,HPN-ICF-VSI-MIB::hpnicfVsiNextAvailableVsiIndex,Unsigned32,read-only,,current,,Next available VSI entry index for creating VSI. Its value ranges from 0x1 to 0xFFFFFFFF. The invalid value 0xFFFFFFFF indicates that no VSI entry can be created.
.1.3.6.1.4.1.11.2.14.11.15.2.105.1.1.2,HPN-ICF-VSI-MIB::hpnicfVsiL2vpnStatus,INTEGER,read-write,,current,true(1):false(2),The global configuration of L2VPN.
.1.3.6.1.4.1.11.2.14.11.15.2.105.1.2,HPN-ICF-VSI-MIB::hpnicfVsiTable,,not-accessible,,current,,A table for configuring VSI parameters.
.1.3.6.1.4.1.11.2.14.11.15.2.105.1.2.1,HPN-ICF-VSI-MIB::hpnicfVsiEntry,,not-accessible,hpnicfVsiIndex,current,,An entry for configuring VSI parameters.
.1.3.6.1.4.1.11.2.14.11.15.2.105.1.2.1.1,HPN-ICF-VSI-MIB::hpnicfVsiIndex,Unsigned32,not-accessible,,current,,Index of VSI. Its value ranges from 0x1 to 0xFFFFFFFE.
.1.3.6.1.4.1.11.2.14.11.15.2.105.1.2.1.2,HPN-ICF-VSI-MIB::hpnicfVsiName,OCTET,read-create,,current,,Name of VSI. Max string length of VSI name is 31.
.1.3.6.1.4.1.11.2.14.11.15.2.105.1.2.1.3,HPN-ICF-VSI-MIB::hpnicfVsiMode,INTEGER,read-create,,current,default(0):martini(1):minm(2):martiniAndMinm(3):kompella(4):kompellaAndMinm(5):minmpxp(6):martiniAndMinmpxp(7):kompellaAndMinmpxp(8),Mode of VSI. Martini mode indicated this VSI supports VPLS service signalled using LDP. Kompella indicated this VSI supports VPLS service signalled using BGP. Minm indicated this VSI supports MAC-in-MAC service. Default indicated this VSI supports all services.
.1.3.6.1.4.1.11.2.14.11.15.2.105.1.2.1.4,HPN-ICF-VSI-MIB::hpnicfMinmIsid,Integer32,read-create,,current,,The PBB I-SID of VSI in minm or martiniAndMinm mode. It must be different for every VSI. Its value ranges from 0x1 to 0xFFFFFF. In other VSI modes, its value is invalid value 0x0.
.1.3.6.1.4.1.11.2.14.11.15.2.105.1.2.1.5,HPN-ICF-VSI-MIB::hpnicfVsiId,Unsigned32,read-create,,current,,Identifier of VSI in martini or martiniAndMinm mode, by default, it's the PW ID of this VSI. Its value ranges from 1 to 4294967295. In other VSI modes, its value is invalid value 0.
.1.3.6.1.4.1.11.2.14.11.15.2.105.1.2.1.6,HPN-ICF-VSI-MIB::hpnicfVsiTransMode,INTEGER,read-create,,current,vlan(1):ethernet(2),Transit Mode of VSI.
.1.3.6.1.4.1.11.2.14.11.15.2.105.1.2.1.7,HPN-ICF-VSI-MIB::hpnicfVsiEnableHubSpoke,INTEGER,read-create,,current,disable(1):enable(2),Config HubSpoke property of this VSI.
.1.3.6.1.4.1.11.2.14.11.15.2.105.1.2.1.8,HPN-ICF-VSI-MIB::hpnicfVsiAdminState,INTEGER,read-create,,current,adminUp(1):adminDown(2),Set VSI admin state as adminUp or adminDown.
.1.3.6.1.4.1.11.2.14.11.15.2.105.1.2.1.9,HPN-ICF-VSI-MIB::hpnicfVsiRowStatus,INTEGER,read-create,,current,active(1):notInService(2):notReady(3):createAndGo(4):createAndWait(5):destroy(6),Operation status of this table entry.
.1.3.6.1.4.1.11.2.14.11.15.2.105.1.2.1.10,HPN-ICF-VSI-MIB::hpnicfVsiSpbIsid,Integer32,read-create,,current,,The SPB I-SID of VSI in minm or martiniAndMinm mode. It must be different for every VSI. Its value ranges from 0xFF to 0xFFFFFF. In other VSI modes, its value is invalid value 0x0.
.1.3.6.1.4.1.11.2.14.11.15.2.105.1.2.1.11,HPN-ICF-VSI-MIB::hpnicfVsiVxlanID,Unsigned32,read-only,,current,,VXLAN ID, in the range of 0x0 to 0xFFFFFF. Value 0xFFFFFFFF means this VSI does not enable VXLAN service.
.1.3.6.1.4.1.11.2.14.11.15.2.105.1.2.1.12,HPN-ICF-VSI-MIB::hpnicfVsiArpSuppression,INTEGER,read-create,,current,true(1):false(2),The capability of ARP suppression.
.1.3.6.1.4.1.11.2.14.11.15.2.105.1.2.1.13,HPN-ICF-VSI-MIB::hpnicfVsiFlooding,INTEGER,read-create,,current,true(1):false(2),The capability of MAC(Media Access Control) flooding.
.1.3.6.1.4.1.11.2.14.11.15.2.105.1.2.1.14,HPN-ICF-VSI-MIB::hpnicfVsiLocalMacCount,Unsigned32,read-only,,current,,The number of VSI local MAC addresses.
.1.3.6.1.4.1.11.2.14.11.15.2.105.1.3,HPN-ICF-VSI-MIB::hpnicfVsiXconnectTable,,not-accessible,,current,,A table for configuring xconnect parameters.
.1.3.6.1.4.1.11.2.14.11.15.2.105.1.3.1,HPN-ICF-VSI-MIB::hpnicfVsiXconnectEntry,,not-accessible,hpnicfVsiXconnectIfIndex:hpnicfVsiXconnectEvcSrvInstId,current,,An entry for configuring xconnect parameters. Each entry means connecting a service instance of a interface to a VSI.
.1.3.6.1.4.1.11.2.14.11.15.2.105.1.3.1.1,HPN-ICF-VSI-MIB::hpnicfVsiXconnectIfIndex,Unsigned32,not-accessible,,current,,Index of the interface associated with the VSI.
.1.3.6.1.4.1.11.2.14.11.15.2.105.1.3.1.2,HPN-ICF-VSI-MIB::hpnicfVsiXconnectEvcSrvInstId,Unsigned32,not-accessible,,current,,Index of the service instance associated with the VSI.
.1.3.6.1.4.1.11.2.14.11.15.2.105.1.3.1.3,HPN-ICF-VSI-MIB::hpnicfVsiXconnectVsiName,OCTET,read-create,,current,,Name of VSI. Max string length of VSI name is 31.
.1.3.6.1.4.1.11.2.14.11.15.2.105.1.3.1.4,HPN-ICF-VSI-MIB::hpnicfVsiXconnectAccessMode,INTEGER,read-create,,current,vlan(1):ethernet(2),Access mode of this service instance.
.1.3.6.1.4.1.11.2.14.11.15.2.105.1.3.1.5,HPN-ICF-VSI-MIB::hpnicfVsiXconnectHubSpoke,INTEGER,read-create,,current,none(1):hub(2):spoke(3),Config HubSpoke property of this service instance.
.1.3.6.1.4.1.11.2.14.11.15.2.105.1.3.1.6,HPN-ICF-VSI-MIB::hpnicfVsiXconnectRowStatus,INTEGER,read-create,,current,active(1):notInService(2):notReady(3):createAndGo(4):createAndWait(5):destroy(6),Operation status of this table entry.
.1.3.6.1.4.1.11.2.14.11.15.2.105.1.4,HPN-ICF-VSI-MIB::hpnicfVsiPwBindTable,,not-accessible,,current,,A table for PW(PseudoWire) mapping to VSI.
.1.3.6.1.4.1.11.2.14.11.15.2.105.1.4.1,HPN-ICF-VSI-MIB::hpnicfVsiPwBindEntry,,not-accessible,hpnicfVsiIndex:hpnicfVsiPwIndex,current,,Each entry means a PW mapping to a VSI.
.1.3.6.1.4.1.11.2.14.11.15.2.105.1.4.1.1,HPN-ICF-VSI-MIB::hpnicfVsiPwIndex,Unsigned32,not-accessible,,current,,A unique index for the conceptual row identifying a PW in the pwTable.
.1.3.6.1.4.1.11.2.14.11.15.2.105.1.4.1.2,HPN-ICF-VSI-MIB::hpnicfVsiPwBindAttributes,BITS,read-create,,current,noSplitHorizon(0):hub(1),This bit mask indicates optional values for this PW. The following describes these bit fields: noSplitHorizon flag indicates that the PW disable split horizon forwarding. hub flag indicates that the PW as the hub link the VSI.
.1.3.6.1.4.1.11.2.14.11.15.2.105.1.4.1.3,HPN-ICF-VSI-MIB::hpnicfVsiPwBindRowStatus,INTEGER,read-create,,current,active(1):notInService(2):notReady(3):createAndGo(4):createAndWait(5):destroy(6),Operation status of this table entry. A row entry cannot be modified when the value of this object is 'active'.
.1.3.6.1.4.1.11.2.14.11.15.2.105.1.5,HPN-ICF-VSI-MIB::hpnicfVsiFloodMacTable,,not-accessible,,current,,A table of MAC addresses enabled with selective flooding.
.1.3.6.1.4.1.11.2.14.11.15.2.105.1.5.1,HPN-ICF-VSI-MIB::hpnicfVsiFloodMacEntry,,not-accessible,hpnicfVsiIndex:hpnicfVsiFloodMac,current,,Each entry represents a selective flooding MAC.
.1.3.6.1.4.1.11.2.14.11.15.2.105.1.5.1.1,HPN-ICF-VSI-MIB::hpnicfVsiFloodMac,OCTET,not-accessible,,current,,MAC address.
.1.3.6.1.4.1.11.2.14.11.15.2.105.1.5.1.2,HPN-ICF-VSI-MIB::hpnicfVsiFloodMacRowStatus,INTEGER,read-create,,current,active(1):notInService(2):notReady(3):createAndGo(4):createAndWait(5):destroy(6),Operation status of this table entry.
.1.3.6.1.4.1.11.2.14.11.15.2.105.1.6,HPN-ICF-VSI-MIB::hpnicfVsiLocalMacTable,,not-accessible,,current,,A table for VSI local MAC addresses.
.1.3.6.1.4.1.11.2.14.11.15.2.105.1.6.1,HPN-ICF-VSI-MIB::hpnicfVsiLocalMacEntry,,not-accessible,hpnicfVsiIndex:hpnicfVsiLocalMacAddr,current,,A local MAC address of VSI.
.1.3.6.1.4.1.11.2.14.11.15.2.105.1.6.1.1,HPN-ICF-VSI-MIB::hpnicfVsiLocalMacAddr,OCTET,not-accessible,,current,,MAC address.
.1.3.6.1.4.1.11.2.14.11.15.2.105.1.6.1.2,HPN-ICF-VSI-MIB::hpnicfVsiLocalMacIfIndex,Integer32,read-only,,current,,Index of the interface associated with the MAC address.
.1.3.6.1.4.1.11.2.14.11.15.2.105.1.6.1.3,HPN-ICF-VSI-MIB::hpnicfVsiLocalMacSrvID,Unsigned32,read-only,,current,,Index of the service instance associated with the MAC address.
.1.3.6.1.4.1.11.2.14.11.15.2.106,HPN-ICF-OID-MIB::hpnicfEvc,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.2.106.1,HPN-ICF-EVC-MIB::hpnicfEvcObjects,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.2.106.1.1,HPN-ICF-EVC-MIB::hpnicfEvcScalarGroup,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.2.106.1.1.1,HPN-ICF-EVC-MIB::hpnicfEvcSrvInstEncapCapabilities,BITS,read-only,,current,encapDefault(0):encapUntagged(1):encapTagged(2):encapSvlanId(3):encapSvlanIdList(4):encapSvlanIdOnlyTagged(5):encapSvlanIdCvlanId(6):encapSvlanIdCvlanIdList(7):encapCvlanId(8):encapCvlanIdList(9),This object displays the encapsulation capabilities of service instance with respect to certain fields. The following values may be supported: encapDefault: Support for matching packets by the default criteria which matches packets that do not match any other service instance. encapUntagged: Support for matching untagged packets. encapTagged: Support for matching all tagged packets. encapSvlanId: Support for matching packets by an SVLAN ID, and the packets may be untagged if PVID of the port is the SVLAN ID when the encapSvlanIdOnlyTagged field is not set. encapSvlanIdList: Support for matching packets by SVLAN ID list, and the packets may be untagged if PVID of the port is in SVLAN ID list when the encapSvlanIdOnlyTagged field is not set. encapSvlanIdOnlyTagged: Support for matching only tagged packets by an SVLAN ID or a SVLAN ID list. encapSvlanIdCvlanId: Support for matching packets by an SVLAN ID and a CVLAN ID. encapSvlanIdCvlanIdList: Support for matching packets by an SVLAN ID and a CVLAN ID list. encapCvlanId: Support for matching packets by a CVLAN ID. encapCvlanIdList: Support for matching packets by a CVLAN ID list.
.1.3.6.1.4.1.11.2.14.11.15.2.106.1.1.2,HPN-ICF-EVC-MIB::hpnicfEvcPortMaxSrvInstNum,Integer32,read-only,,current,,The max service instance number of a port.
.1.3.6.1.4.1.11.2.14.11.15.2.106.1.2,HPN-ICF-EVC-MIB::hpnicfEvcSrvInstTable,,not-accessible,,current,,A table for configuring service instance parameter of the port.
.1.3.6.1.4.1.11.2.14.11.15.2.106.1.2.1,HPN-ICF-EVC-MIB::hpnicfEvcSrvInstEntry,,not-accessible,ifIndex:hpnicfEvcSrvInstId,current,,An entry for configuring service instance parameter of the port.
.1.3.6.1.4.1.11.2.14.11.15.2.106.1.2.1.1,HPN-ICF-EVC-MIB::hpnicfEvcSrvInstId,Integer32,not-accessible,,current,,Service instance ID. Its value ranges from 1 to the value of hpnicfEvcPortMaxSrvInstNum.
.1.3.6.1.4.1.11.2.14.11.15.2.106.1.2.1.2,HPN-ICF-EVC-MIB::hpnicfEvcSrvInstEncap,INTEGER,read-create,,current,none(0):default(1):untagged(2):tagged(3):svlanIdList(4):svlanIdListOnlyTagged(5):svlanIdCvlanId(6):svlanIdCvlanIdList(7):svlanIdCvlanIdAll(8):cvlanIdList(9),Encapsulation mode of a service instance. none : Invalid value. default : Match packets by the default criteria which matches packets that do not match any other service instance. It is supported when the encapDefault field of hpnicfEvcCapabilities is set. untagged : Match untagged packets. It is supported when the encapUntagged field of hpnicfEvcCapabilities is set. tagged : Match all tagged packets. It is supported when the encapTagged field of hpnicfEvcCapabilities is set. svlanIdList: Match packets by SVLAN ID list and untagged packets if PVID of the port is in SVLAN ID list, the SVLAN ID list is denoted by hpnicfEvcSrvInstSvlanIdListLow and hpnicfEvcSrvInstSvlanIdListHigh. It is supported when the encapSvlanId or encapSvlanIdList field of hpnicfEvcCapabilities is set. Only a VLAN ID is supported when the encapSvlanId field of hpnicfEvcCapabilities is set. svlanIdListOnlyTagged: Match only tagged packets by an SVLAN ID list, the SVLAN ID is denoted by hpnicfEvcSrvInstSvlanIdListLow and hpnicfEvcSrvInstSvlanIdListLow. It is supported when the encapSvlanId (or encapSvlanIdList) and encapSvlanIdOnlyTagged fields of hpnicfEvcCapabilities are set. Only a VLAN ID is supported when the encapSvlanId and encapSvlanIdOnlyTagged field of hpnicfEvcCapabilities are set. svlanIdCvlanId: Match packets by an SVLAN ID and a CVLAN ID. The SVLAN ID is denoted by hpnicfEvcSrvInstSvlanIdListLow or hpnicfEvcSrvInstSvlanIdListHigh. The CVLAN ID is denoted by hpnicfEvcSrvInstCvlanIdListLow or hpnicfEvcSrvInstCvlanIdListHigh. It is supported when the encapSvlanIdCvlanId field of hpnicfEvcCapabilities is set. svlanIdCvlanIdList: Match packets by an SVLAN ID and a CVLAN ID list. The SVLAN ID is denoted by hpnicfEvcSrvInstSvlanIdListLow or hpnicfEvcSrvInstSvlanIdListHigh. The CVLAN ID list is denoted by hpnicfEvcSrvInstCvlanIdListLow and hpnicfEvcSrvInstCvlanIdListHigh. It is supported when the encapSvlanIdCvlanIdList field of hpnicfEvcCapabilities is set. svlanIdCvlanIdAll: Match packets by an SVLAN ID and all CVLAN IDs. The SVLAN ID is denoted by hpnicfEvcSrvInstSvlanIdListLow or hpnicfEvcSrvInstSvlanIdListHigh. The CVLAN ID includes all VLAN IDs. It is supported when the encapSvlanIdCvlanIdList field of hpnicfEvcCapabilities is set. cvlanIdList: Match packets by CVLAN ID list. The CVLAN ID list is denoted by hpnicfEvcSrvInstCvlanIdListLow and hpnicfEvcSrvInstCvlanIdListLow. It is supported when the encapCvlanId or encapCvlanIdList field of hpnicfEvcCapabilities is set.
.1.3.6.1.4.1.11.2.14.11.15.2.106.1.2.1.3,HPN-ICF-EVC-MIB::hpnicfEvcSrvInstSvlanIdListLow,OCTET,read-create,,current,,This object contains the first 2048 bits of the 4096-bit vector, indicating which SVLAN IDs are assigned to this service instance. The lowest order bit of the first octet corresponds to SVLAN 1, while the highest order bit of the last octet corresponds to SVLAN 2048. A bit that is on (equal to 1) indicates that the corresponding SVLAN ID is assigned to this service instance.
.1.3.6.1.4.1.11.2.14.11.15.2.106.1.2.1.4,HPN-ICF-EVC-MIB::hpnicfEvcSrvInstSvlanIdListHigh,OCTET,read-create,,current,,This object contains the second 2048 bits of the 4096-bit vector, indicating which SVLAN IDs are assigned to this service instance. The lowest order bit of the first octet corresponds to SVLAN 2049, while the third highest order bit of the last octet corresponds to SVLAN 4094. A bit that is on (equal to 1) indicates that the corresponding SVLAN ID is assigned to this service instance.
.1.3.6.1.4.1.11.2.14.11.15.2.106.1.2.1.5,HPN-ICF-EVC-MIB::hpnicfEvcSrvInstRowStatus,INTEGER,read-create,,current,active(1):notInService(2):notReady(3):createAndGo(4):createAndWait(5):destroy(6),Operation status of this table entry. When a row in this table is in active state, no objects in that row can be modified by the agent.
.1.3.6.1.4.1.11.2.14.11.15.2.106.1.2.1.6,HPN-ICF-EVC-MIB::hpnicfEvcSrvInstEnableInStat,INTEGER,read-create,,current,true(1):false(2),The object is used to configure inbound statistics function to this service instance.
.1.3.6.1.4.1.11.2.14.11.15.2.106.1.2.1.7,HPN-ICF-EVC-MIB::hpnicfEvcSrvInstEnableOutStat,INTEGER,read-create,,current,true(1):false(2),The object is used to configure outbound statistics function to this service instance.
.1.3.6.1.4.1.11.2.14.11.15.2.106.1.2.1.8,HPN-ICF-EVC-MIB::hpnicfEvcSrvInstCvlanIdListLow,OCTET,read-create,,current,,This object contains the first 2048 bits of the 4096-bit vector, indicating which CVLAN IDs are assigned to this service instance. The lowest order bit of the first octet corresponds to CVLAN 1, while the highest order bit of the last octet corresponds to CVLAN 2048. A bit that is on (equal to 1) indicates that the corresponding CVLAN ID is assigned to this service instance.
.1.3.6.1.4.1.11.2.14.11.15.2.106.1.2.1.9,HPN-ICF-EVC-MIB::hpnicfEvcSrvInstCvlanIdListHigh,OCTET,read-create,,current,,This object contains the second 2048 bits of the 4096-bit vector, indicating which CVLAN IDs are assigned to this service instance. The lowest order bit of the first octet corresponds to CVLAN 2049, while the third highest order bit of the last octet corresponds to CVLAN 4094. A bit that is on (equal to 1) indicates that the corresponding CVLAN ID is assigned to this service instance.
.1.3.6.1.4.1.11.2.14.11.15.2.106.1.3,HPN-ICF-EVC-MIB::hpnicfEvcSrvInstCarTable,,not-accessible,,current,,A table of configuring CAR for the service instance.
.1.3.6.1.4.1.11.2.14.11.15.2.106.1.3.1,HPN-ICF-EVC-MIB::hpnicfEvcSrvInstCarEntry,,not-accessible,ifIndex:hpnicfEvcSrvInstId,current,,An entry in the table containing CAR configuration on the service instance. If the following entries are not supported by the service instance, or not configured to the service instance, they are zero.
.1.3.6.1.4.1.11.2.14.11.15.2.106.1.3.1.1,HPN-ICF-EVC-MIB::hpnicfEvcSrvInstInCarIndex,Integer32,read-write,,current,,The object is used to configure inbound CAR function to this service instance. The CAR index is defined in hpnicfIfQoSAggregativeCarIndex at HPN-ICF-IFQOS2-MIB. The default value is 0.
.1.3.6.1.4.1.11.2.14.11.15.2.106.1.3.1.2,HPN-ICF-EVC-MIB::hpnicfEvcSrvInstOutCarIndex,Integer32,read-write,,current,,The object is used to configure outbound CAR function to this service instance. The CAR index is defined in hpnicfIfQoSAggregativeCarIndex at HPN-ICF-IFQOS2-MIB. The default value is 0.
.1.3.6.1.4.1.11.2.14.11.15.2.106.1.4,HPN-ICF-EVC-MIB::hpnicfEvcSrvInstStatInfoTable,,not-accessible,,current,,A table for displaying statistics information of service instance.
.1.3.6.1.4.1.11.2.14.11.15.2.106.1.4.1,HPN-ICF-EVC-MIB::hpnicfEvcSrvInstStatInfoEntry,,not-accessible,ifIndex:hpnicfEvcSrvInstId,current,,Table entry of the service instance. If the statistics function is not supported by the service instance, or not configured to the service instance, following entries will be zero.
.1.3.6.1.4.1.11.2.14.11.15.2.106.1.4.1.1,HPN-ICF-EVC-MIB::hpnicfEvcSrvInstInPackets,Counter64,read-only,,current,,Number of inbound packets received on this service instance.
.1.3.6.1.4.1.11.2.14.11.15.2.106.1.4.1.2,HPN-ICF-EVC-MIB::hpnicfEvcSrvInstInBytes,Counter64,read-only,,current,,Byte counts of inbound packets received on this service instance.
.1.3.6.1.4.1.11.2.14.11.15.2.106.1.4.1.3,HPN-ICF-EVC-MIB::hpnicfEvcSrvInstOutPackets,Counter64,read-only,,current,,Number of outbound packets transmitted on this service instance.
.1.3.6.1.4.1.11.2.14.11.15.2.106.1.4.1.4,HPN-ICF-EVC-MIB::hpnicfEvcSrvInstOutBytes,Counter64,read-only,,current,,Byte counts of outbound packets transmitted on this service instance.
.1.3.6.1.4.1.11.2.14.11.15.2.107,HPN-ICF-OID-MIB::hpnicfMinm,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.2.107.1,HPN-ICF-MINM-MIB::hpnicfMinmObjects,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.2.107.1.1,HPN-ICF-MINM-MIB::hpnicfMinmScalarGroup,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.2.107.1.1.1,HPN-ICF-MINM-MIB::hpnicfMinmCapabilities,BITS,read-only,,current,reEncapsulation(0):uplink(1):vsiShareConnection(2),This object displays the MAC-in-MAC capabilities with respect to certain fields. The following values may be supported: reEncapsulation: Support for configuring re-encapsulation (denoted by hpnicfMinmVsiReEncapsulation). uplink: Support for configuring uplink (denoted by hpnicfMinmUplinkTable). vsiShareConnection: It indicates that connection entry is shared in all VSIs. hpnicfVsiIndex is meaningless and must be value 1 in hpnicfMinmConnectionTable.
.1.3.6.1.4.1.11.2.14.11.15.2.107.1.1.2,HPN-ICF-MINM-MIB::hpnicfMinmBmac,OCTET,read-only,,current,,A MAC address used in creating the MAC header of I-tagged frames transmitted across a Provider Backbone Bridged Network. The invalid value FF:FF:FF:FF:FF:FF indicates that this node is not supported by the device.
.1.3.6.1.4.1.11.2.14.11.15.2.107.1.2,HPN-ICF-MINM-MIB::hpnicfMinmVsiTable,,not-accessible,,current,,A table for configuring MAC-in-MAC service instance parameter.
.1.3.6.1.4.1.11.2.14.11.15.2.107.1.2.1,HPN-ICF-MINM-MIB::hpnicfMinmVsiEntry,,not-accessible,hpnicfVsiIndex,current,,An entry for configuring MAC-in-MAC service instance parameter.
.1.3.6.1.4.1.11.2.14.11.15.2.107.1.2.1.1,HPN-ICF-MINM-MIB::hpnicfMinmVsiBvlan,Integer32,read-write,,current,,BVLAN ID. The value 65535 indicates the BVLAN has not been configured for get operation, and it indicates deleting the BVLAN configration for set operation.
.1.3.6.1.4.1.11.2.14.11.15.2.107.1.2.1.2,HPN-ICF-MINM-MIB::hpnicfMinmVsiReEncapsulation,INTEGER,read-write,,current,enabled(1):disabled(2),Whether the re-encapsulation is enabled. The reEncapsulation field of hpnicfMinmCapabilities denotes whether this node is supported.
.1.3.6.1.4.1.11.2.14.11.15.2.107.1.2.1.3,HPN-ICF-MINM-MIB::hpnicfMinmVsiNextAvailableLinkId,Unsigned32,read-only,,current,,Next available connection entry index for creating a connection entry. Its value ranges from 0x1 to 0xFFFFFFFF.The invalid value 0xFFFFFFFF indicates that connection entry can not be created. When the vsiShareConnection field of hpnicfMinmCapabilities is set, this node returns an invalid value if the value of hpnicfVsiIndex is not 1.
.1.3.6.1.4.1.11.2.14.11.15.2.107.1.3,HPN-ICF-MINM-MIB::hpnicfMinmUplinkTable,,not-accessible,,current,,A table for uplink ports of the VSI in MAC-in-MAC. The uplink field of hpnicfMinmCapabilities denotes whether this table is supported.
.1.3.6.1.4.1.11.2.14.11.15.2.107.1.3.1,HPN-ICF-MINM-MIB::hpnicfMinmUplinkEntry,,not-accessible,hpnicfVsiIndex:ifIndex,current,,An entry for uplink ports of the VSI in MAC-in-MAC.
.1.3.6.1.4.1.11.2.14.11.15.2.107.1.3.1.1,HPN-ICF-MINM-MIB::hpnicfMinmUplinkRowStatus,INTEGER,read-create,,current,active(1):notInService(2):notReady(3):createAndGo(4):createAndWait(5):destroy(6),Operation status of this table entry.
.1.3.6.1.4.1.11.2.14.11.15.2.107.1.4,HPN-ICF-MINM-MIB::hpnicfMinmConnectionTable,,not-accessible,,current,,A table for the connection information of BMAC.
.1.3.6.1.4.1.11.2.14.11.15.2.107.1.4.1,HPN-ICF-MINM-MIB::hpnicfMinmConnectionEntry,,not-accessible,hpnicfVsiIndex:hpnicfMinmConnectionLinkId,current,,An entry for the connection information of BMAC. When the vsiShareConnection field of hpnicfMinmCapabilities is set, connection entry is shared in all VSIs. hpnicfVsiIndex is meaningless and must be value 1 in hpnicfMinmConnectionTable.
.1.3.6.1.4.1.11.2.14.11.15.2.107.1.4.1.1,HPN-ICF-MINM-MIB::hpnicfMinmConnectionLinkId,Unsigned32,not-accessible,,current,,Entry index when the vsiShareConnection bit of hpnicfMinmCapabilities is set(hpnicfVsiIndex is meaningless and must be value 1), else entry index in the VSI of hpnicfVsiIndex.Its value ranges from 0x1 to 0xFFFFFFFE. It should be obtained from hpnicfMinmVsiNextAvailableLinkId for create operation.
.1.3.6.1.4.1.11.2.14.11.15.2.107.1.4.1.2,HPN-ICF-MINM-MIB::hpnicfMinmConnectionBmac,OCTET,read-create,,current,,BMAC of an connection entry.
.1.3.6.1.4.1.11.2.14.11.15.2.107.1.4.1.3,HPN-ICF-MINM-MIB::hpnicfMinmConnectionBvlan,Integer32,read-create,,current,,BVLAN of an connection entry.
.1.3.6.1.4.1.11.2.14.11.15.2.107.1.4.1.4,HPN-ICF-MINM-MIB::hpnicfMinmConnectionPort,Integer32,read-create,,current,,Port ifindex of an connection entry.
.1.3.6.1.4.1.11.2.14.11.15.2.107.1.4.1.5,HPN-ICF-MINM-MIB::hpnicfMinmConnectionStatus,INTEGER,read-create,,current,learned(1):configDynamic(2):configStatic(3):blackhole(4),State of an connection entry.
.1.3.6.1.4.1.11.2.14.11.15.2.107.1.4.1.6,HPN-ICF-MINM-MIB::hpnicfMinmConnectionAgingStatus,INTEGER,read-only,,current,aging(1):noAged(2),Aging time of an connection entry.
.1.3.6.1.4.1.11.2.14.11.15.2.107.1.4.1.7,HPN-ICF-MINM-MIB::hpnicfMinmConnectionRowStatus,INTEGER,read-create,,current,active(1):notInService(2):notReady(3):createAndGo(4):createAndWait(5):destroy(6),Operation status of this table entry.
.1.3.6.1.4.1.11.2.14.11.15.2.108,HPN-ICF-OID-MIB::hpnicfBlg,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.2.108.1,HPN-ICF-BLG-MIB::hpnicfBlgObjects,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.2.108.1.1,HPN-ICF-BLG-MIB::hpnicfBlgStatsTable,,not-accessible,,current,,This table contains the statistics information about balance groups.
.1.3.6.1.4.1.11.2.14.11.15.2.108.1.1.1,HPN-ICF-BLG-MIB::hpnicfBlgStatsEntry,,not-accessible,hpnicfBlgIndex,current,,This list contains statistics information.
.1.3.6.1.4.1.11.2.14.11.15.2.108.1.1.1.1,HPN-ICF-BLG-MIB::hpnicfBlgIndex,Integer32,not-accessible,,current,,The index of the balance group.
.1.3.6.1.4.1.11.2.14.11.15.2.108.1.1.1.2,HPN-ICF-BLG-MIB::hpnicfBlgGroupTxPacketCount,Counter64,read-only,,current,,When retrieved, this object returns the count of packets the balance group has sent.
.1.3.6.1.4.1.11.2.14.11.15.2.108.1.1.1.3,HPN-ICF-BLG-MIB::hpnicfBlgGroupRxPacketCount,Counter64,read-only,,current,,When retrieved, this object returns the count of packets the balance group has received.
.1.3.6.1.4.1.11.2.14.11.15.2.108.1.1.1.4,HPN-ICF-BLG-MIB::hpnicfBlgGroupTxByteCount,Counter64,read-only,,current,,When retrieved, this object returns the count of bytes the balance group has sent.
.1.3.6.1.4.1.11.2.14.11.15.2.108.1.1.1.5,HPN-ICF-BLG-MIB::hpnicfBlgGroupRxByteCount,Counter64,read-only,,current,,When retrieved, this object returns the count of bytes the balance group has received.
.1.3.6.1.4.1.11.2.14.11.15.2.108.1.1.1.6,HPN-ICF-BLG-MIB::hpnicfBlgGroupCountClear,INTEGER,read-write,,current,cleared(1):nouse(2),This object is used to reset the counter of the balance group. Read operation is meaningless.
.1.3.6.1.4.1.11.2.14.11.15.2.109,HPN-ICF-OID-MIB::hpnicfRS485,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.2.109.1,HPN-ICF-RS485-MIB::hpnicfRS485Properties,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.2.109.1.1,HPN-ICF-RS485-MIB::hpnicfRS485PropertiesTable,,not-accessible,,current,,Propertie table.
.1.3.6.1.4.1.11.2.14.11.15.2.109.1.1.1,HPN-ICF-RS485-MIB::hpnicfRS485PropertiesEntry,,not-accessible,ifIndex,current,,Propertie entry.
.1.3.6.1.4.1.11.2.14.11.15.2.109.1.1.1.1,HPN-ICF-RS485-MIB::hpnicfRS485RawSessionNextIndex,Integer32,read-only,,current,,The next valid index of raw sessions, from 1 to 64, which session has been created. When there is no valid index left, it will return 0.
.1.3.6.1.4.1.11.2.14.11.15.2.109.1.1.1.2,HPN-ICF-RS485-MIB::hpnicfRS485BaudRate,INTEGER,read-write,,current,bautRate300(1):bautRate600(2):bautRate1200(3):bautRate2400(4):bautRate4800(5):bautRate9600(6):bautRate19200(7):bautRate38400(8):bautRate57600(9):bautRate115200(10),The port's baud rate.
.1.3.6.1.4.1.11.2.14.11.15.2.109.1.1.1.3,HPN-ICF-RS485-MIB::hpnicfRS485DataBits,INTEGER,read-write,,current,five(1):six(2):seven(3):eight(4),The port's number of data bits in a character.
.1.3.6.1.4.1.11.2.14.11.15.2.109.1.1.1.4,HPN-ICF-RS485-MIB::hpnicfRS485Parity,INTEGER,read-write,,current,none(1):odd(2):even(3):mark(4):space(5),The port's sense of a character parity bit.
.1.3.6.1.4.1.11.2.14.11.15.2.109.1.1.1.5,HPN-ICF-RS485-MIB::hpnicfRS485StopBits,INTEGER,read-write,,current,one(1):two(2):oneAndHalf(3),The port's number of stop bits.
.1.3.6.1.4.1.11.2.14.11.15.2.109.1.1.1.6,HPN-ICF-RS485-MIB::hpnicfRS485FlowControl,INTEGER,read-write,,current,none(1):hardware(2):xonOrxoff(3),The port's type of input flow control. 'none' indicates no flow control at this level. 'hardware' indicates use of hardware signals. 'xonOrxoff' indicates use of software function.
.1.3.6.1.4.1.11.2.14.11.15.2.109.1.1.1.7,HPN-ICF-RS485-MIB::hpnicfRS485TXCharacters,Integer32,read-only,,current,,The number of output characters for the port.
.1.3.6.1.4.1.11.2.14.11.15.2.109.1.1.1.8,HPN-ICF-RS485-MIB::hpnicfRS485RXCharacters,Integer32,read-only,,current,,The number of input characters for the port.
.1.3.6.1.4.1.11.2.14.11.15.2.109.1.1.1.9,HPN-ICF-RS485-MIB::hpnicfRS485TXErrCharacters,Integer32,read-only,,current,,The number of output error characters for the port.
.1.3.6.1.4.1.11.2.14.11.15.2.109.1.1.1.10,HPN-ICF-RS485-MIB::hpnicfRS485RXErrCharacters,Integer32,read-only,,current,,The number of input error characters for the port.
.1.3.6.1.4.1.11.2.14.11.15.2.109.1.1.1.11,HPN-ICF-RS485-MIB::hpnicfRS485ResetCharacters,INTEGER,read-write,,current,counting(1):clear(2),Reset the counters to zero, inlucding hpnicfRS485TXCharacters, hpnicfRS485RXCharacters, hpnicfRS485TXErrCharacters and hpnicfRS485RXErrCharacters.
.1.3.6.1.4.1.11.2.14.11.15.2.109.2,HPN-ICF-RS485-MIB::hpnicfRS485RawSessions,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.2.109.2.1,HPN-ICF-RS485-MIB::hpnicfRS485RawSessionSummary,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.2.109.2.1.1,HPN-ICF-RS485-MIB::hpnicfRS485RawSessionMaxNum,Integer32,read-only,,current,,The max number of raw sessions what we can support.
.1.3.6.1.4.1.11.2.14.11.15.2.109.2.2,HPN-ICF-RS485-MIB::hpnicfRS485RawSessionTable,,not-accessible,,current,,RS485 raw session table. Data recieved from rs485 will be sent to the destination by raw sockets.
.1.3.6.1.4.1.11.2.14.11.15.2.109.2.2.1,HPN-ICF-RS485-MIB::hpnicfRS485RawSessionEntry,,not-accessible,ifIndex:hpnicfRS485SessionIndex,current,,Parameters of a session, including remote IP address, remote port, local port, and so on.
.1.3.6.1.4.1.11.2.14.11.15.2.109.2.2.1.1,HPN-ICF-RS485-MIB::hpnicfRS485SessionIndex,Integer32,not-accessible,,current,,Raw session index.
.1.3.6.1.4.1.11.2.14.11.15.2.109.2.2.1.2,HPN-ICF-RS485-MIB::hpnicfRS485SessionType,INTEGER,read-write,,current,udp(1):tcpClient(2):tcpServer(3),The type of a session. A session can use UDP socket, TCP socket as a client, or TCP socket as a server.
.1.3.6.1.4.1.11.2.14.11.15.2.109.2.2.1.3,HPN-ICF-RS485-MIB::hpnicfRS485SessionAddType,INTEGER,read-write,,current,unknown(0):ipv4(1):ipv6(2):ipv4z(3):ipv6z(4):dns(16),This object indicates the transport type of the address contained in hpnicfRS485SessionRemoteIP object.
.1.3.6.1.4.1.11.2.14.11.15.2.109.2.2.1.4,HPN-ICF-RS485-MIB::hpnicfRS485SessionRemoteIP,OCTET,read-create,,current,,The IP of remote entry. When session type is 'udp', this is the IP of the peer. When session type is 'tcpClient', this is the IP of the server . When session type is 'tcpServer', this is invalid, it will return 0. 
.1.3.6.1.4.1.11.2.14.11.15.2.109.2.2.1.5,HPN-ICF-RS485-MIB::hpnicfRS485SessionRemotePort,Integer32,read-create,,current,,The port of remote entry. When session type is 'udp', this is port of the peer. When session type is 'tcpClient', this is the port of the server. When session type is 'tcpServer', this is invalid, it will return 0. 
.1.3.6.1.4.1.11.2.14.11.15.2.109.2.2.1.6,HPN-ICF-RS485-MIB::hpnicfRS485SessionLocalPort,Integer32,read-create,,current,,Local socket port. When session type is 'udp', this is local UDP socket port. When session type is 'tcpClient', this is invalid, it will return 0. When session type is 'tcpServer', this is the local port which will be listened. 
.1.3.6.1.4.1.11.2.14.11.15.2.109.2.2.1.7,HPN-ICF-RS485-MIB::hpnicfRS485SessionStatus,INTEGER,read-create,,current,active(1):notInService(2):notReady(3):createAndGo(4):createAndWait(5):destroy(6),The status column used for creating, modifying, and deleting instances of the columnar objects in raw session table.
.1.3.6.1.4.1.11.2.14.11.15.2.109.2.3,HPN-ICF-RS485-MIB::hpnicfRS485RawSessionErrInfoTable,,not-accessible,,current,,Error infomation table. It is fail to create a session, management station can get infomation from this table.
.1.3.6.1.4.1.11.2.14.11.15.2.109.2.3.1,HPN-ICF-RS485-MIB::hpnicfRS485RawSessionErrInfoEntry,,not-accessible,ifIndex:hpnicfRS485SessionIndex,current,,Error infomaition.
.1.3.6.1.4.1.11.2.14.11.15.2.109.2.3.1.1,HPN-ICF-RS485-MIB::hpnicfRS485RawSessionErrInfo,OCTET,read-only,,current,,Error infomation string. When a response with 'noCreeation' for row creation in table hpnicfRS485RawSessionTable, the management station should display this string to users, thus users can konw the reason.
.1.3.6.1.4.1.11.2.14.11.15.2.110,HPN-ICF-OID-MIB::hpnicfARPRatelimit,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.2.110.1,HPN-ICF-ARP-RATELIMIT-MIB::hpnicfARPRatelimitObjects,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.2.110.1.1,HPN-ICF-ARP-RATELIMIT-MIB::hpnicfARPRatelimitTrap,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.2.110.1.1.0,HPN-ICF-ARP-RATELIMIT-MIB::hpnicfARPRatelimitTraps,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.2.110.1.1.0.1,HPN-ICF-ARP-RATELIMIT-MIB::hpnicfARPRatelimitOverspeedTrap,,,,,,If the rate of ARP packets delivered to the CPU on a device exceeds the threshold, a trap message is generated and sent to the remote monitoring device.
.1.3.6.1.4.1.11.2.14.11.15.2.110.1.1.1,HPN-ICF-ARP-RATELIMIT-MIB::hpnicfARPRatelimitTrapObjects,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.2.110.1.1.1.1,HPN-ICF-ARP-RATELIMIT-MIB::hpnicfARPRatelimitTrapVer,Unsigned32,accessible-for-notify,,current,,The version of trap information.
.1.3.6.1.4.1.11.2.14.11.15.2.110.1.1.1.2,HPN-ICF-ARP-RATELIMIT-MIB::hpnicfARPRatelimitTrapCount,Unsigned32,accessible-for-notify,,current,,Number of cells in the trap message. A trap message may contain multiple cells, each of which indicates that the rate information of ARP packets exceeds the threshold.
.1.3.6.1.4.1.11.2.14.11.15.2.110.1.1.1.3,HPN-ICF-ARP-RATELIMIT-MIB::hpnicfARPRatelimitTrapMsg,OCTET,accessible-for-notify,,current,,This object is the cell section in a trap message sent from a monitored device. This object can contain multiple cells. This object is in the format of '<cell1><cell2>...'. Each cell consists of 17 octets in the format of '<TrapOrigin><IfIndex><OverSpeedValue><Threshold><Interval>'. <TrapOrigin> indicates the source of the trap message and has size of 1 octet. It only supports the following values. 1 - Global. 2 - Interface. <IfIndex> is the index of the interface where the rate of ARP packet exceeds the threshold and has size of 4 octets. It is 0xFFFFFFFF when <TrapOrigin> is 1(Global). <OverSpeedValue> indicates the rate that ARP packets are actually delivered and has size of 4 octets. <Threshold> indicates the threshold that ARP packets can be delivered to CPU and has size of 4 octets. <Interval> indicates the interval that a trap message is sent out and has size of 4 octets.
.1.3.6.1.4.1.11.2.14.11.15.2.111,HPN-ICF-OID-MIB::hpnicfLI,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.2.111.1,HPN-ICF-LI-MIB::hpnicfLICommon,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.2.111.1.1,HPN-ICF-LI-MIB::hpnicfLITrapBindObjects,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.2.111.1.1.1,HPN-ICF-LI-MIB::hpnicfLIBoardInformation,Unsigned32,accessible-for-notify,,current,,It is a slot number.
.1.3.6.1.4.1.11.2.14.11.15.2.111.1.2,HPN-ICF-LI-MIB::hpnicfLINotifications,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.2.111.1.2.0,HPN-ICF-LI-MIB::hpnicfLINotificationsPrefix,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.2.111.1.2.0.1,HPN-ICF-LI-MIB::hpnicfLIActive,,,,,,This Notification is sent when a type of intercepting configuration is changed from inactive to active. The value of the hpnicfLIStreamtype which identify the actual intercept stream is included in this notification.
.1.3.6.1.4.1.11.2.14.11.15.2.111.1.2.0.2,HPN-ICF-LI-MIB::hpnicfLITimeOut,,,,,,When the time specified in hpnicfLIMediationTimeout arrives, the device notifies the manager corresponding intercept is removed.
.1.3.6.1.4.1.11.2.14.11.15.2.111.1.2.0.3,HPN-ICF-LI-MIB::hpnicfLIFailureInformation,,,,,,When interception is configured on distributed device, the configuration perhaps failed on some board. If this happened, this notification will occur.
.1.3.6.1.4.1.11.2.14.11.15.2.111.1.3,HPN-ICF-LI-MIB::hpnicfLIObjects,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.2.111.1.3.1,HPN-ICF-LI-MIB::hpnicfLINewIndex,Integer32,read-only,,current,,This object will be used as an index value for a new hpnicfLIMediationEntry. Whenever read, the agent will give a non-used value. This is to reduce the probability of conflict during creation of new hpnicfLIMediationTable entries.
.1.3.6.1.4.1.11.2.14.11.15.2.111.1.3.2,HPN-ICF-LI-MIB::hpnicfLIMediationTable,,not-accessible,,current,,This table describes interception gateway information with which interception device communicates.
.1.3.6.1.4.1.11.2.14.11.15.2.111.1.3.2.1,HPN-ICF-LI-MIB::hpnicfLIMediationEntry,,not-accessible,hpnicfLIMediationIndex,current,,An entry of configuring mediation device.
.1.3.6.1.4.1.11.2.14.11.15.2.111.1.3.2.1.1,HPN-ICF-LI-MIB::hpnicfLIMediationIndex,Integer32,not-accessible,,current,,hpnicfLIMediationIndex is a entry identifier. The Mediation Device should be responsible for making sure these are unique. Before creating a new entry, a value for this variable may be obtained by reading hpnicfLINewIndex to reduce the probability of a value collision.
.1.3.6.1.4.1.11.2.14.11.15.2.111.1.3.2.1.2,HPN-ICF-LI-MIB::hpnicfLIMediationDestAddrType,INTEGER,read-write,,current,unknown(0):ipv4(1):ipv6(2):ipv4z(3):ipv6z(4):dns(16),The type of hpnicfLIMediationDestAddr.
.1.3.6.1.4.1.11.2.14.11.15.2.111.1.3.2.1.3,HPN-ICF-LI-MIB::hpnicfLIMediationDestAddr,OCTET,read-write,,current,,The IP Address of the Mediation Device to receive intercepted traffic.
.1.3.6.1.4.1.11.2.14.11.15.2.111.1.3.2.1.4,HPN-ICF-LI-MIB::hpnicfLIMediationDestPort,Unsigned32,read-write,,current,,The L4-port number on the Mediation Device to receive intercepted traffic.
.1.3.6.1.4.1.11.2.14.11.15.2.111.1.3.2.1.5,HPN-ICF-LI-MIB::hpnicfLIMediationSrcInterface,Integer32,read-write,,current,,The interface on the intercepting device from which to transmit intercepted data. If zero, intercepting device will select an outbound interface according to hpnicfLIMediationDestAddr.
.1.3.6.1.4.1.11.2.14.11.15.2.111.1.3.2.1.6,HPN-ICF-LI-MIB::hpnicfLIMediationDscp,Integer32,read-write,,current,,The Differentiated Services Code Point the intercepting device applies to the IP packets encapsulating the intercepted traffic.
.1.3.6.1.4.1.11.2.14.11.15.2.111.1.3.2.1.7,HPN-ICF-LI-MIB::hpnicfLIMediationTimeOut,OCTET,read-write,,current,,The time at which this row and all related Stream Table rows should be automatically removed, and the intercept function expire.
.1.3.6.1.4.1.11.2.14.11.15.2.111.1.3.2.1.8,HPN-ICF-LI-MIB::hpnicfLIMediationTransport,INTEGER,read-write,,current,udp(1),The protocol used in transferring intercepted data to the Mediation Device.
.1.3.6.1.4.1.11.2.14.11.15.2.111.1.3.2.1.9,HPN-ICF-LI-MIB::hpnicfLIMediationNotificationEnable,INTEGER,read-write,,current,true(1):false(2),This variable controls the generation of any notifications or informs by the MIB agent for this table entry.
.1.3.6.1.4.1.11.2.14.11.15.2.111.1.3.2.1.10,HPN-ICF-LI-MIB::hpnicfLIMediationRowStatus,INTEGER,read-create,,current,active(1):notInService(2):notReady(3):createAndGo(4):createAndWait(5):destroy(6),Operation status of this table entry.
.1.3.6.1.4.1.11.2.14.11.15.2.111.1.3.3,HPN-ICF-LI-MIB::hpnicfLIStreamTable,,not-accessible,,current,,This table lists the traffic stream's type to be intercepted. The specified filter is defined in hpnicfLIIPStreamTable, hpnicfLIMACStreamTable or hpnicfLIUserStreamTable, according to hpnicfLIStreamtype. Also it contains counters for packets to be intercepted and dropped by attached type of filter.
.1.3.6.1.4.1.11.2.14.11.15.2.111.1.3.3.1,HPN-ICF-LI-MIB::hpnicfLIStreamEntry,,not-accessible,hpnicfLIMediationIndex:hpnicfLIStreamIndex,current,,A single type of data stream to be intercepted.
.1.3.6.1.4.1.11.2.14.11.15.2.111.1.3.3.1.1,HPN-ICF-LI-MIB::hpnicfLIStreamIndex,Integer32,not-accessible,,current,,The index of the stream entry.
.1.3.6.1.4.1.11.2.14.11.15.2.111.1.3.3.1.2,HPN-ICF-LI-MIB::hpnicfLIStreamtype,INTEGER,read-write,,current,ip(1):mac(2):userConnection(3),Identifies the type of stream, and according to it uses filter table. It can not be changed after a filter table is attached to it. The following types of streams are supported: ip: IP filter. The exact definition is a row in hpnicfLIIPStreamTable. mac: MAC filter. The exact definition is a row in hpnicfLIMACStreamTable. userConnecton: User connection filter. The exact definition is a row in hpnicfLIUserStreamTable.
.1.3.6.1.4.1.11.2.14.11.15.2.111.1.3.3.1.3,HPN-ICF-LI-MIB::hpnicfLIStreamEnable,INTEGER,read-write,,current,true(1):false(2),If 'true', the interception is active. And it is set to 'true' only after an additional filter specification has been attached to this stream.
.1.3.6.1.4.1.11.2.14.11.15.2.111.1.3.3.1.4,HPN-ICF-LI-MIB::hpnicfLIStreamPackets,Counter32,read-only,,current,,The numbers of packets that have been intercepted.
.1.3.6.1.4.1.11.2.14.11.15.2.111.1.3.3.1.5,HPN-ICF-LI-MIB::hpnicfLIStreamDrops,Counter32,read-only,,current,,The numbers of packets were dropped in the lawful intercept process.
.1.3.6.1.4.1.11.2.14.11.15.2.111.1.3.3.1.6,HPN-ICF-LI-MIB::hpnicfLIStreamHPackets,Counter64,read-only,,current,,The numbers of packets have been intercepted. This object is a 64-bit version of hpnicfLIStreamPackets.
.1.3.6.1.4.1.11.2.14.11.15.2.111.1.3.3.1.7,HPN-ICF-LI-MIB::hpnicfLIStreamHDrops,Counter64,read-only,,current,,The numbers of packets were dropped in the lawful intercept process. This object is a 64-bit version of hpnicfLIStreamDrops.
.1.3.6.1.4.1.11.2.14.11.15.2.111.1.3.3.1.8,HPN-ICF-LI-MIB::hpnicfLIStreamRowStatus,INTEGER,read-create,,current,active(1):notInService(2):notReady(3):createAndGo(4):createAndWait(5):destroy(6),Operation status of this table entry.
.1.3.6.1.4.1.11.2.14.11.15.2.111.2,HPN-ICF-LI-MIB::hpnicfLIIPStream,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.2.111.2.1,HPN-ICF-LI-MIB::hpnicfLIIPStreamObjects,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.2.111.2.1.1,HPN-ICF-LI-MIB::hpnicfLIIPStreamTable,,not-accessible,,current,,This table lists the IPv4 and IPv6 streams to be intercepted. It is associated with hpnicfLIMediationTable and hpnicfLIStreamTable.
.1.3.6.1.4.1.11.2.14.11.15.2.111.2.1.1.1,HPN-ICF-LI-MIB::hpnicfLIIPStreamEntry,,not-accessible,hpnicfLIMediationIndex:hpnicfLIStreamIndex,current,,A single stream to be intercepted. The first index indicates the Mediation Device. The second index is that of the stream's counter entry in the hpnicfLIStreamTable. The second index permits multiple classifiers to be used together, such as having an IP address as source or destination.
.1.3.6.1.4.1.11.2.14.11.15.2.111.2.1.1.1.1,HPN-ICF-LI-MIB::hpnicfLIIPStreamInterface,Integer32,read-write,,current,,Traffic received or transmitted over this interface will be intercepted. This value must be set when creating a stream entry, either zero, or a valid interface index. If the value is zero, interception accepts any interface. Then at least one additional parameter must be selected, and not be default value.
.1.3.6.1.4.1.11.2.14.11.15.2.111.2.1.1.1.2,HPN-ICF-LI-MIB::hpnicfLIIPStreamAddrType,INTEGER,read-write,,current,unknown(0):ipv4(1):ipv6(2):ipv4z(3):ipv6z(4):dns(16),The type of address, used in packet selection.
.1.3.6.1.4.1.11.2.14.11.15.2.111.2.1.1.1.3,HPN-ICF-LI-MIB::hpnicfLIIPStreamDestAddr,OCTET,read-write,,current,,The Destination address used in packet selection. This address will be consistent with the type specified in hpnicfLIIPStreamAddrType.
.1.3.6.1.4.1.11.2.14.11.15.2.111.2.1.1.1.4,HPN-ICF-LI-MIB::hpnicfLIIPStreamDestAddrLength,Unsigned32,read-write,,current,,The length of the Destination Prefix. A value of zero means all addresses to match. This prefix length will be consistent with the type specified in hpnicfLIIPStreamAddrType.
.1.3.6.1.4.1.11.2.14.11.15.2.111.2.1.1.1.5,HPN-ICF-LI-MIB::hpnicfLIIPStreamSrcAddr,OCTET,read-write,,current,,The Source Address used in packet selection. This address will be consistent with the type specified in hpnicfLIIPStreamAddrType.
.1.3.6.1.4.1.11.2.14.11.15.2.111.2.1.1.1.6,HPN-ICF-LI-MIB::hpnicfLIIPStreamSrcAddrLength,Unsigned32,read-write,,current,,The length of the Source Prefix. A value of zero means all addresses to match. This prefix length will be consistent with the type specified in hpnicfLIIPStreamAddrType.
.1.3.6.1.4.1.11.2.14.11.15.2.111.2.1.1.1.7,HPN-ICF-LI-MIB::hpnicfLIIPStreamTosByte,Integer32,read-write,,current,,The value of the TOS byte. If hpnicfLIIPStreamTosByte&(~hpnicfLIIPStreamTosByteMask)!=0, configuration is rejected.
.1.3.6.1.4.1.11.2.14.11.15.2.111.2.1.1.1.8,HPN-ICF-LI-MIB::hpnicfLIIPStreamTosByteMask,Integer32,read-write,,current,,This value is ANDed with the value of the TOS byte in a packet and compared with hpnicfLIIPStreamTosByte. If the values are equal, the comparison is equal. If both the mask and the TosByte value are zero, the result is to always accept.
.1.3.6.1.4.1.11.2.14.11.15.2.111.2.1.1.1.9,HPN-ICF-LI-MIB::hpnicfLIIPStreamFlowId,Integer32,read-write,,current,,The flow identifier in an IPv6 header. -1 indicates that the Flow Id is unused.
.1.3.6.1.4.1.11.2.14.11.15.2.111.2.1.1.1.10,HPN-ICF-LI-MIB::hpnicfLIIPStreamProtocol,Integer32,read-write,,current,,The IP protocol to match against the IPv4 protocol number or the IPv6 Next- Header number in the packet.
.1.3.6.1.4.1.11.2.14.11.15.2.111.2.1.1.1.11,HPN-ICF-LI-MIB::hpnicfLIIPStreamDestL4PortMin,Unsigned32,read-write,,current,,The minimum value that the layer-4 destination port number in the packet must have in order to match. This value must be equal to or less than the value specified for this entry in hpnicfLIIPStreamDestL4PortMax. If both hpnicfLIIPStreamDestL4PortMin and hpnicfLIIPStreamDestL4PortMax are at their default values, the port number is effectively unused. If hpnicfLIIPStreamDestL4PortMin is equal to hpnicfLIIPStreamDestL4PortMax, only one port number to be intercepted.
.1.3.6.1.4.1.11.2.14.11.15.2.111.2.1.1.1.12,HPN-ICF-LI-MIB::hpnicfLIIPStreamDestL4PortMax,Unsigned32,read-write,,current,,The maximum value that the layer-4 destination port number in the packet must have in order to match this classifier entry. This value must be equal to or greater than the value specified for this entry in hpnicfLIIPStreamDestL4PortMin. If both hpnicfLIIPStreamDestL4PortMin and hpnicfLIIPStreamDestL4PortMax are at their default values, the port number is effectively unused. If hpnicfLIIPStreamDestL4PortMin is equal to hpnicfLIIPStreamDestL4PortMax, only one port number to be intercepted.
.1.3.6.1.4.1.11.2.14.11.15.2.111.2.1.1.1.13,HPN-ICF-LI-MIB::hpnicfLIIPStreamSrcL4PortMin,Unsigned32,read-write,,current,,The minimum value that the layer-4 destination port number in the packet must have in order to match. This value must be equal to or less than the value specified for this entry in hpnicfLIIPStreamSrcL4PortMax. If both hpnicfLIIPStreamSrcL4PortMin and hpnicfLIIPStreamSrcL4PortMax are at their default values, the port number is effectively unused. If hpnicfLIIPStreamSrcL4PortMin is equal to hpnicfLIIPStreamSrcL4PortMax, only one port number to be intercepted.
.1.3.6.1.4.1.11.2.14.11.15.2.111.2.1.1.1.14,HPN-ICF-LI-MIB::hpnicfLIIPStreamSrcL4PortMax,Unsigned32,read-write,,current,,The maximum value that the layer-4 destination port number in the packet must have in order to match this classifier entry. This value must be equal to or greater than the value specified for this entry in hpnicfLIIPStreamSrcL4PortMin. If both hpnicfLIIPStreamSrcL4PortMin and hpnicfLIIPStreamSrcL4PortMax are at their default values, the port number is effectively unused. If hpnicfLIIPStreamSrcL4PortMin is equal to hpnicfLIIPStreamSrcL4PortMax, only one port number to be intercepted.
.1.3.6.1.4.1.11.2.14.11.15.2.111.2.1.1.1.15,HPN-ICF-LI-MIB::hpnicfLIIPStreamVRF,OCTET,read-write,,current,,It is the name of a Virtual Routing and Forwarding (VRF) of a VPN.
.1.3.6.1.4.1.11.2.14.11.15.2.111.2.1.1.1.18,HPN-ICF-LI-MIB::hpnicfLIIPStreamRowStatus,INTEGER,read-create,,current,active(1):notInService(2):notReady(3):createAndGo(4):createAndWait(5):destroy(6),Operation status of this table entry.
.1.3.6.1.4.1.11.2.14.11.15.2.111.3,HPN-ICF-LI-MIB::hpnicfLIMACStream,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.2.111.3.1,HPN-ICF-LI-MIB::hpnicfLIMACStreamObjects,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.2.111.3.1.1,HPN-ICF-LI-MIB::hpnicfLIMACStreamTable,,not-accessible,,current,,This table lists the IEEE 802 streams to be intercepted. It is associated with hpnicfLIMediationTable and hpnicfLIStreamTable.
.1.3.6.1.4.1.11.2.14.11.15.2.111.3.1.1.1,HPN-ICF-LI-MIB::hpnicfLIMACStreamEntry,,not-accessible,hpnicfLIMediationIndex:hpnicfLIStreamIndex,current,,A single stream to be intercepted. The first index indicates the Mediation Device. The second index is that of the stream's counter entry in the hpnicfLIStreamTable. The second index permits multiple classifiers to be used together, such as having an MAC address as source or destination.
.1.3.6.1.4.1.11.2.14.11.15.2.111.3.1.1.1.1,HPN-ICF-LI-MIB::hpnicfLIMACStreamFields,BITS,read-write,,current,interface(0):dstMacAddress(1):srcMacAddress(2):ethernetPid(3):dSap(4):sSap(5),This object displays what attributes will be compared to identify traffic. interface: indicates that traffic on the stated interface is to be intercepted dstMacAddress: indicates that traffic destined to a given address should be intercepted srcMacAddress: indicates that traffic sourced from a given address should be intercepted ethernetPid: indicates that traffic with a stated Ethernet Protocol Identifier should be intercepted dSap: indicates that traffic with an certain 802.2 LLC Destination SAP should be intercepted sSap: indicates that traffic with an certain 802.2 LLC Source SAP should be intercepted At least one of the bits has to be set in order to activate an entry. If multiple bits are set, traffic to be intercepted must be satisfied with all set attributes.
.1.3.6.1.4.1.11.2.14.11.15.2.111.3.1.1.1.2,HPN-ICF-LI-MIB::hpnicfLIMACStreamInterface,Integer32,read-write,,current,,Traffic received or transmitted over this interface will be intercepted. This value must be set when creating a stream entry, either zero, or a valid interface index. If the value is zero, interception accepts any interface. Additional parameter must be selected together.
.1.3.6.1.4.1.11.2.14.11.15.2.111.3.1.1.1.3,HPN-ICF-LI-MIB::hpnicfLIMACStreamDestAddr,OCTET,read-write,,current,,The Destination address used in packet selection.
.1.3.6.1.4.1.11.2.14.11.15.2.111.3.1.1.1.4,HPN-ICF-LI-MIB::hpnicfLIMACStreamSrcAddr,OCTET,read-write,,current,,The Source Address used in packet selection.
.1.3.6.1.4.1.11.2.14.11.15.2.111.3.1.1.1.5,HPN-ICF-LI-MIB::hpnicfLIMACStreamEthPid,Unsigned32,read-write,,current,,The value of the Ethernet Protocol Identifier in the Ethernet traffic or IEEE 802.2 SNAP traffic.
.1.3.6.1.4.1.11.2.14.11.15.2.111.3.1.1.1.6,HPN-ICF-LI-MIB::hpnicfLIMACStreamDSap,Unsigned32,read-write,,current,,The value of the IEEE 802.2 Destination SAP.
.1.3.6.1.4.1.11.2.14.11.15.2.111.3.1.1.1.7,HPN-ICF-LI-MIB::hpnicfLIMACStreamSSap,Unsigned32,read-write,,current,,The value of the IEEE 802.2 Source SAP.
.1.3.6.1.4.1.11.2.14.11.15.2.111.3.1.1.1.8,HPN-ICF-LI-MIB::hpnicfLIMACStreamRowStatus,INTEGER,read-create,,current,active(1):notInService(2):notReady(3):createAndGo(4):createAndWait(5):destroy(6),Operation status of this table entry.
.1.3.6.1.4.1.11.2.14.11.15.2.111.4,HPN-ICF-LI-MIB::hpnicfLIUserStream,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.2.111.4.1,HPN-ICF-LI-MIB::hpnicfLIUserStreamObjects,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.2.111.4.1.1,HPN-ICF-LI-MIB::hpnicfLIUserStreamTable,,not-accessible,,current,,This table lists the user connection streams to be intercepted. It is associated with hpnicfLIMediationTable and hpnicfLIStreamTable.
.1.3.6.1.4.1.11.2.14.11.15.2.111.4.1.1.1,HPN-ICF-LI-MIB::hpnicfLIUserStreamEntry,,not-accessible,hpnicfLIMediationIndex:hpnicfLIStreamIndex,current,,A single stream to be intercepted. The first index indicates the Mediation Device. The second index is that of the stream's counter entry in the hpnicfLIStreamTable. This permits multiple classifiers to be used together.
.1.3.6.1.4.1.11.2.14.11.15.2.111.4.1.1.1.1,HPN-ICF-LI-MIB::hpnicfLIUserStreamAcctSessID,OCTET,read-write,,current,,This is the RADIUS attribute 44 acct-session-ID. The string must be set, and the length not be zero.
.1.3.6.1.4.1.11.2.14.11.15.2.111.4.1.1.1.2,HPN-ICF-LI-MIB::hpnicfLIUserStreamRowStatus,INTEGER,read-create,,current,active(1):notInService(2):notReady(3):createAndGo(4):createAndWait(5):destroy(6),Operation status of this table entry.
.1.3.6.1.4.1.11.2.14.11.15.2.112,HPN-ICF-OID-MIB::hpnicfDar,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.2.112.1,HPN-ICF-DAR-MIB::hpnicfDarIfObjects,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.2.112.1.1,HPN-ICF-DAR-MIB::hpnicfDarIfStatisticsObjects,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.2.112.1.1.1,HPN-ICF-DAR-MIB::hpnicfDarStatisticsTable,,not-accessible,,current,,The table contains packet statistics of DAR.
.1.3.6.1.4.1.11.2.14.11.15.2.112.1.1.1.1,HPN-ICF-DAR-MIB::hpnicfDarStatisticsEntry,,not-accessible,ifIndex:hpnicfDarStatisticsProtocolID,current,,Entry items.
.1.3.6.1.4.1.11.2.14.11.15.2.112.1.1.1.1.1,HPN-ICF-DAR-MIB::hpnicfDarStatisticsProtocolID,INTEGER,not-accessible,,current,invalidProtocol(1):bgp(2):cifs(3):citrix(4):cuseeme(5):dhcp(6):dns(7):egp(8):eigrp(9):exchange(10):fasttrack(11):finger(12):ftp(13):gnutella(14):gopher(15):gre(16):http(17):h323(18):icmp(19):igmp(20):imap(21):ip(22):ipinip(23):ipsec(24):ipv6(25):irc(26):kerberos(27):l2tp(28):ldap(29):mgcp(30):napster(31):netbios(32):netshow(33):nfs(34):nntp(35):notes(36):novadign(37):ntp(38):pcanywhere(39):pop3(40):pptp(41):printer(42):rcmd(43):rip(44):rsvp(45):rtcp(46):rtp(47):rtsp(48):secureftp(49):securehttp(50):secureimap(51):secureirc(52):secureldap(53):securenntp(54):securepop3(55):securetelnet(56):sip(57):skinny(58):smtp(59):snmp(60):socks(61):sqlnet(62):sqlserver(63):ssh(64):streamwork(65):sunrpc(66):syslog(67):tcp(68):tcphandshake(69):telnet(70):tftp(71):total(72):udp(73):unknownothers(74):unknowntcp(75):unknownudp(76):userdefine001(77):userdefine002(78):userdefine003(79):userdefine004(80):userdefine005(81):userdefine006(82):userdefine007(83):userdefine008(84):userdefine009(85):userdefine010(86):vdolive(87):winmx(88):xwindows(89),Protocol id.
.1.3.6.1.4.1.11.2.14.11.15.2.112.1.1.1.1.2,HPN-ICF-DAR-MIB::hpnicfDarStatisticsProtocolName,OCTET,read-only,,current,,Protocol name.
.1.3.6.1.4.1.11.2.14.11.15.2.112.1.1.1.1.3,HPN-ICF-DAR-MIB::hpnicfDarStatisticsInPkts,Counter64,read-only,,current,,The number of incoming packets of the specific protocol.
.1.3.6.1.4.1.11.2.14.11.15.2.112.1.1.1.1.4,HPN-ICF-DAR-MIB::hpnicfDarStatisticsInBytes,Counter64,read-only,,current,,The number of incoming octets of the specific protocol.
.1.3.6.1.4.1.11.2.14.11.15.2.112.1.1.1.1.5,HPN-ICF-DAR-MIB::hpnicfDarStatisticsInBitRate,Counter64,read-only,,current,,Incoming bitrate of the specific protocol in last 5 minutes.
.1.3.6.1.4.1.11.2.14.11.15.2.112.1.1.1.1.6,HPN-ICF-DAR-MIB::hpnicfDarStatisticsMaxInBitRate,Counter64,read-only,,current,,Max incoming bitrate of the specific protocol in last 5 minutes.
.1.3.6.1.4.1.11.2.14.11.15.2.112.1.1.1.1.7,HPN-ICF-DAR-MIB::hpnicfDarStatisticsOutPkts,Counter64,read-only,,current,,The number of outgoing packets of the specific protocol.
.1.3.6.1.4.1.11.2.14.11.15.2.112.1.1.1.1.8,HPN-ICF-DAR-MIB::hpnicfDarStatisticsOutBytes,Counter64,read-only,,current,,The number of outgoing octets of the specific protocol.
.1.3.6.1.4.1.11.2.14.11.15.2.112.1.1.1.1.9,HPN-ICF-DAR-MIB::hpnicfDarStatisticsOutBitRate,Counter64,read-only,,current,,Outgoing bitrate of the specific protocol in last 5 minutes.
.1.3.6.1.4.1.11.2.14.11.15.2.112.1.1.1.1.10,HPN-ICF-DAR-MIB::hpnicfDarStatisticsMaxOutBitRate,Counter64,read-only,,current,,Max outgoing bitrate of the specific protocol in last 5 minutes.
.1.3.6.1.4.1.11.2.14.11.15.2.113,HPN-ICF-OID-MIB::hpnicfPBR,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.2.113.1,HPN-ICF-PBR-MIB::hpnicfPBRObjects,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.2.113.1.1,HPN-ICF-PBR-MIB::hpnicfPBRGlobal,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.2.113.1.1.1,HPN-ICF-PBR-MIB::hpnicfPBRNexthopTrapEnabled,INTEGER,read-write,,current,true(1):false(2),The value is a global setting only for IPv4 PBR. If the value is set to 'false', the feature is disabled.
.1.3.6.1.4.1.11.2.14.11.15.2.113.1.1.2,HPN-ICF-PBR-MIB::hpnicfPBRLocalPolicy,OCTET,read-write,,current,,The value is a global setting. An existing policy name setting enables local PBR for IPv4 packets initiated by the device. Only one policy can be applied locally. An empty name setting disables the feature. 
.1.3.6.1.4.1.11.2.14.11.15.2.113.1.1.3,HPN-ICF-PBR-MIB::hpnicfPBRIPv6NexthopTrapEnabled,INTEGER,read-write,,current,true(1):false(2),The value is a global setting only for IPv6 PBR. If the value is set to 'false', the feature is disabled.
.1.3.6.1.4.1.11.2.14.11.15.2.113.1.2,HPN-ICF-PBR-MIB::hpnicfPBRMibTrap,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.2.113.1.2.1,HPN-ICF-PBR-MIB::hpnicfPBRTrapObjects,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.2.113.1.2.1.1,HPN-ICF-PBR-MIB::hpnicfPBRNexthopAddrType,INTEGER,accessible-for-notify,,current,unknown(0):ipv4(1):ipv6(2):ipv4z(3):ipv6z(4):dns(16),Indicating address type of hpnicfPBRNexthopAddr, which can be IPv4 or IPv6.
.1.3.6.1.4.1.11.2.14.11.15.2.113.1.2.1.2,HPN-ICF-PBR-MIB::hpnicfPBRNexthopAddr,OCTET,accessible-for-notify,,current,,The involved next hop IP address of trap information.
.1.3.6.1.4.1.11.2.14.11.15.2.113.1.2.2,HPN-ICF-PBR-MIB::hpnicfPBRTraps,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.2.113.1.2.2.0,HPN-ICF-PBR-MIB::hpnicfPBRTrapsPrefix,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.2.113.1.2.2.0.1,HPN-ICF-PBR-MIB::hpnicfPBRNexthopFailedTrap,,,,,,When the next hop of PBR apply clause became unreachable according to routing information, trap is generated and is sent to the remote monitoring device.
.1.3.6.1.4.1.11.2.14.11.15.2.113.2,HPN-ICF-PBR-MIB::hpnicfPBRTables,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.2.113.2.1,HPN-ICF-PBR-MIB::hpnicfPBRMibPolicyNodeTable,,not-accessible,,current,,A table for PBR nodes. 
.1.3.6.1.4.1.11.2.14.11.15.2.113.2.1.1,HPN-ICF-PBR-MIB::hpnicfPBRMibPolicyNodeEntry,,not-accessible,hpnicfPBRMibPolicyNodeAddrType:hpnicfPBRMibPolicyName:hpnicfPBRMibPolicyNodeId,current,,An entry for PBR nodes. 
.1.3.6.1.4.1.11.2.14.11.15.2.113.2.1.1.1,HPN-ICF-PBR-MIB::hpnicfPBRMibPolicyNodeAddrType,INTEGER,not-accessible,,current,unknown(0):ipv4(1):ipv6(2):ipv4z(3):ipv6z(4):dns(16),Address type of policy node, which can be IPv4 or IPv6.
.1.3.6.1.4.1.11.2.14.11.15.2.113.2.1.1.2,HPN-ICF-PBR-MIB::hpnicfPBRMibPolicyName,OCTET,not-accessible,,current,,Policy name of PBR node.
.1.3.6.1.4.1.11.2.14.11.15.2.113.2.1.1.3,HPN-ICF-PBR-MIB::hpnicfPBRMibPolicyNodeId,Integer32,not-accessible,,current,,Sequence identifier of PBR node.
.1.3.6.1.4.1.11.2.14.11.15.2.113.2.1.1.4,HPN-ICF-PBR-MIB::hpnicfPBRMibPolicyNodeMode,INTEGER,read-create,,current,true(1):false(2),Mode of PBR node. If the mode of a node is marked as true, the packets that meet the matching rules are processed by action rules in the node. If the mode of a node is marked as false, the packets that meet the matching rules are sent back to the normal forwarding path.
.1.3.6.1.4.1.11.2.14.11.15.2.113.2.1.1.5,HPN-ICF-PBR-MIB::hpnicfPBRMibPolicyNodeRowStatus,INTEGER,read-create,,current,active(1):notInService(2):notReady(3):createAndGo(4):createAndWait(5):destroy(6),Operation status of this table entry. Three actions are used: active, createAndGo, and destroy. 
.1.3.6.1.4.1.11.2.14.11.15.2.113.2.2,HPN-ICF-PBR-MIB::hpnicfPBRMibIfPolicyTable,,not-accessible,,current,,A table for interfaces being applied with PBR nodes with the same policy name. 
.1.3.6.1.4.1.11.2.14.11.15.2.113.2.2.1,HPN-ICF-PBR-MIB::hpnicfPBRMibIfPolicyEntry,,not-accessible,hpnicfPBRMibPolicyAddressType:ifIndex,current,,An entry for reference relation between interface and policy nodes.
.1.3.6.1.4.1.11.2.14.11.15.2.113.2.2.1.1,HPN-ICF-PBR-MIB::hpnicfPBRMibPolicyAddressType,INTEGER,not-accessible,,current,unknown(0):ipv4(1):ipv6(2):ipv4z(3):ipv6z(4):dns(16),Address type of policy node, which can be IPv4 or IPv6.
.1.3.6.1.4.1.11.2.14.11.15.2.113.2.2.1.2,HPN-ICF-PBR-MIB::hpnicfPBRMibAppliedPolicyName,OCTET,read-create,,current,,Policy name of PBR nodes.
.1.3.6.1.4.1.11.2.14.11.15.2.113.2.2.1.3,HPN-ICF-PBR-MIB::hpnicfPBRMibIfPolicyRowStatus,INTEGER,read-create,,current,active(1):notInService(2):notReady(3):createAndGo(4):createAndWait(5):destroy(6),Operation status of this table entry. Three actions are used: active, createAndGo, and destroy. 
.1.3.6.1.4.1.11.2.14.11.15.2.113.2.3,HPN-ICF-PBR-MIB::hpnicfPBRMibMatchAclTable,,not-accessible,,current,,A table for ACLs being used by a policy node. Only one ACL can be used within a node at most. 
.1.3.6.1.4.1.11.2.14.11.15.2.113.2.3.1,HPN-ICF-PBR-MIB::hpnicfPBRMibMatchAclEntry,,not-accessible,hpnicfPBRMibPolicyNodeAddrType:hpnicfPBRMibPolicyName:hpnicfPBRMibPolicyNodeId,current,,An entry for policy node that uses an ACL group as its if-match rule.
.1.3.6.1.4.1.11.2.14.11.15.2.113.2.3.1.1,HPN-ICF-PBR-MIB::hpnicfPBRMibAclGroupId,Integer32,read-write,,current,,Index of number-acl group. Setting -1 indicates closing this rule. 
.1.3.6.1.4.1.11.2.14.11.15.2.113.2.4,HPN-ICF-PBR-MIB::hpnicfPBRMibApplyPrecedenceTable,,not-accessible,,current,,A table for precedence values being used by a policy node. Only one precedence value can be used within a node at most. 
.1.3.6.1.4.1.11.2.14.11.15.2.113.2.4.1,HPN-ICF-PBR-MIB::hpnicfPBRMibApplyPrecedenceEntry,,not-accessible,hpnicfPBRMibPolicyNodeAddrType:hpnicfPBRMibPolicyName:hpnicfPBRMibPolicyNodeId,current,,An entry for policy node with an action to set IP precedence for matching packets. 
.1.3.6.1.4.1.11.2.14.11.15.2.113.2.4.1.1,HPN-ICF-PBR-MIB::hpnicfPBRMibApplyPrecedenceValue,Integer32,read-write,,current,,Value of precedence being applied on IP header. <0-7> Value of precedence routine Specify routine precedence(0) priority Specify priority precedence(1) immediate Specify immediate precedence(2) flash Specify flash precedence(3) flash-override Specify flash-override precedence(4) critical Specify critical precedence(5) internet Specify internetwork control precedence(6) network Specify network control precedence(7) Setting -1 indicates closing this action. 
.1.3.6.1.4.1.11.2.14.11.15.2.113.2.5,HPN-ICF-PBR-MIB::hpnicfPBRMibApplyNexthopTable,,not-accessible,,current,,A table for next hop actions being used by a policy node. 
.1.3.6.1.4.1.11.2.14.11.15.2.113.2.5.1,HPN-ICF-PBR-MIB::hpnicfPBRMibApplyNexthopEntry,,not-accessible,hpnicfPBRMibPolicyNodeAddrType:hpnicfPBRMibPolicyName:hpnicfPBRMibPolicyNodeId:hpnicfPBRMibApplyNexthopIndex,current,,An entry for policy node with an action to set next hop for matching packets. 
.1.3.6.1.4.1.11.2.14.11.15.2.113.2.5.1.1,HPN-ICF-PBR-MIB::hpnicfPBRMibApplyNexthopIndex,Integer32,not-accessible,,current,,Index of next hop for the apply next hop action.
.1.3.6.1.4.1.11.2.14.11.15.2.113.2.5.1.2,HPN-ICF-PBR-MIB::hpnicfPBRMibApplyNexthopVpnName,OCTET,read-create,,current,,Name of VPN instance where apply next hop action is used.
.1.3.6.1.4.1.11.2.14.11.15.2.113.2.5.1.3,HPN-ICF-PBR-MIB::hpnicfPBRMibApplyNexthopAddressType,INTEGER,read-create,,current,unknown(0):ipv4(1):ipv6(2):ipv4z(3):ipv6z(4):dns(16),Address type of hpnicfPBRMibApplyNexthopAddress, which can be IPv4 or IPv6.
.1.3.6.1.4.1.11.2.14.11.15.2.113.2.5.1.4,HPN-ICF-PBR-MIB::hpnicfPBRMibApplyNexthopAddress,OCTET,read-create,,current,,Next hop IP address of apply next hop action.
.1.3.6.1.4.1.11.2.14.11.15.2.113.2.5.1.5,HPN-ICF-PBR-MIB::hpnicfPBRMibApplyNexthopTrackId,Integer32,read-create,,current,,Identifier of track object related with next hop. Setting 0 indicates closing this function. 
.1.3.6.1.4.1.11.2.14.11.15.2.113.2.5.1.6,HPN-ICF-PBR-MIB::hpnicfPBRMibApplyNexthopDirect,INTEGER,read-create,,current,true(1):false(2),Direct route attribute of next hop according to route information.
.1.3.6.1.4.1.11.2.14.11.15.2.113.2.5.1.7,HPN-ICF-PBR-MIB::hpnicfPBRMibApplyNexthopRowStatus,INTEGER,read-create,,current,active(1):notInService(2):notReady(3):createAndGo(4):createAndWait(5):destroy(6),Operation status of this table entry. Three actions are used: active, createAndGo, and destroy. 
.1.3.6.1.4.1.11.2.14.11.15.2.113.2.6,HPN-ICF-PBR-MIB::hpnicfPBRMibApplyDefaultNexthopTable,,not-accessible,,current,,A table for default next hop actions being used by a policy node.
.1.3.6.1.4.1.11.2.14.11.15.2.113.2.6.1,HPN-ICF-PBR-MIB::hpnicfPBRMibApplyDefaultNexthopEntry,,not-accessible,hpnicfPBRMibPolicyNodeAddrType:hpnicfPBRMibPolicyName:hpnicfPBRMibPolicyNodeId:hpnicfPBRMibApplyDefaultNexthopIndex,current,,An entry for policy node with an action to set default next hop for matching packets. 
.1.3.6.1.4.1.11.2.14.11.15.2.113.2.6.1.1,HPN-ICF-PBR-MIB::hpnicfPBRMibApplyDefaultNexthopIndex,Integer32,not-accessible,,current,,Index of default next hop for the apply default next hop action.
.1.3.6.1.4.1.11.2.14.11.15.2.113.2.6.1.2,HPN-ICF-PBR-MIB::hpnicfPBRMibApplyDefaultNexthopVpnName,OCTET,read-create,,current,,Name of VPN instance where apply default next hop action is used.
.1.3.6.1.4.1.11.2.14.11.15.2.113.2.6.1.3,HPN-ICF-PBR-MIB::hpnicfPBRMibApplyDefaultNexthopAddressType,INTEGER,read-create,,current,unknown(0):ipv4(1):ipv6(2):ipv4z(3):ipv6z(4):dns(16),Address type of hpnicfPBRMibApplyDefaultNexthopAddress, which can be IPv4 or IPv6.
.1.3.6.1.4.1.11.2.14.11.15.2.113.2.6.1.4,HPN-ICF-PBR-MIB::hpnicfPBRMibApplyDefaultNexthopAddress,OCTET,read-create,,current,,Next hop IP address of apply default next hop action.
.1.3.6.1.4.1.11.2.14.11.15.2.113.2.6.1.5,HPN-ICF-PBR-MIB::hpnicfPBRMibApplyDefaultNexthopTrackId,Integer32,read-create,,current,,Identifier of track object related with default next hop. Setting 0 indicates closing this function.
.1.3.6.1.4.1.11.2.14.11.15.2.113.2.6.1.6,HPN-ICF-PBR-MIB::hpnicfPBRMibApplyDefaultNexthopDirect,INTEGER,read-create,,current,true(1):false(2),Direct route attribute of apply default next hop address according to route information.
.1.3.6.1.4.1.11.2.14.11.15.2.113.2.6.1.7,HPN-ICF-PBR-MIB::hpnicfPBRMibApplyDefaultNexthopRowStatus,INTEGER,read-create,,current,active(1):notInService(2):notReady(3):createAndGo(4):createAndWait(5):destroy(6),Operation status of this table entry. Three actions are used: active, createAndGo, and destroy. 
.1.3.6.1.4.1.11.2.14.11.15.2.114,HPN-ICF-OID-MIB::hpnicfAAANasId,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.2.114.1,HPN-ICF-AAA-NASID-MIB::hpnicfAAANasIdObjects,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.2.114.1.1,HPN-ICF-AAA-NASID-MIB::hpnicfAAANasIdTable,,not-accessible,,current,,The AAA Nas-id table.
.1.3.6.1.4.1.11.2.14.11.15.2.114.1.1.1,HPN-ICF-AAA-NASID-MIB::hpnicfAAANasIdEntry,,not-accessible,hpnicfAAANasIdName,current,,The AAA Nas-id entry.
.1.3.6.1.4.1.11.2.14.11.15.2.114.1.1.1.1,HPN-ICF-AAA-NASID-MIB::hpnicfAAANasIdName,OCTET,read-only,,current,,The Nas-id name.
.1.3.6.1.4.1.11.2.14.11.15.2.115,HPN-ICF-OID-MIB::hpnicfTeTunnel,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.2.115.1,HPN-ICF-TE-TUNNEL-MIB::hpnicfTeTunnelScalars,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.2.115.1.1,HPN-ICF-TE-TUNNEL-MIB::hpnicfTeTunnelMaxTunnelIndex,Unsigned32,read-only,,current,,The max value of tunnel id is permitted configure on the device.
.1.3.6.1.4.1.11.2.14.11.15.2.115.2,HPN-ICF-TE-TUNNEL-MIB::hpnicfTeTunnelObjects,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.2.115.2.1,HPN-ICF-TE-TUNNEL-MIB::hpnicfTeTunnelStaticCrlspTable,,not-accessible,,current,,This table contains information for static-crlsp, and through this to get detail information about this static-crlsp. Only support transit LSR and egress LSR.
.1.3.6.1.4.1.11.2.14.11.15.2.115.2.1.1,HPN-ICF-TE-TUNNEL-MIB::hpnicfTeTunnelStaticCrlspEntry,,not-accessible,hpnicfTeTunnelStaticCrlspInLabel,current,,The entry in this table describes static-crlsp information.
.1.3.6.1.4.1.11.2.14.11.15.2.115.2.1.1.1,HPN-ICF-TE-TUNNEL-MIB::hpnicfTeTunnelStaticCrlspInLabel,Unsigned32,not-accessible,,current,,This is unique label value that manualy assigned. Uniquely identifies a static-crlsp. Managers should use this to obtain detail static-crlsp information.
.1.3.6.1.4.1.11.2.14.11.15.2.115.2.1.1.2,HPN-ICF-TE-TUNNEL-MIB::hpnicfTeTunnelStaticCrlspName,OCTET,read-only,,current,,The unique name assigned to the static-crlsp.
.1.3.6.1.4.1.11.2.14.11.15.2.115.2.1.1.3,HPN-ICF-TE-TUNNEL-MIB::hpnicfTeTunnelStaticCrlspStatus,INTEGER,read-only,,current,up(1):down(2),Indicates the actual status of this static-crlsp, The value must be up when the static-crlsp status is up and the value must be down when the static-crlsp status is down.
.1.3.6.1.4.1.11.2.14.11.15.2.115.2.1.1.4,HPN-ICF-TE-TUNNEL-MIB::hpnicfTeTunnelStaticCrlspRole,INTEGER,read-only,,current,transit(1):tail(2),This value indicate the role of this static-crlsp. This value must be transit at transit point of the tunnel, and tail at terminating point of the tunnel.
.1.3.6.1.4.1.11.2.14.11.15.2.115.2.1.1.5,HPN-ICF-TE-TUNNEL-MIB::hpnicfTeTunnelStaticCrlspXCPointer,OBJECT,read-only,,current,,This pointer unique identify a row of mplsXCTable. This value should be zeroDotZero when the static-crlsp is down. The mplsXCTable identifies the segments that compose this tunnel, their characteristics, and relationships to each other.
.1.3.6.1.4.1.11.2.14.11.15.2.115.2.2,HPN-ICF-TE-TUNNEL-MIB::hpnicfTeTunnelCoTable,,not-accessible,,current,,This table contains information for Co-routed reverse crlsp and infomation of Co-routed bidirectional Tunnel Interface. If hpnicfCorouteTunnelLspInstance is zero, to obtain infomation of Co-routed bidirectional Tunnel Interface, otherwise to obtain Co-routed reverse crlsp infomation.
.1.3.6.1.4.1.11.2.14.11.15.2.115.2.2.1,HPN-ICF-TE-TUNNEL-MIB::hpnicfTeTunnelCoEntry,,not-accessible,hpnicfTeTunnelCoIndex:hpnicfTeTunnelCoLspInstance:hpnicfTeTunnelCoIngressLSRId:hpnicfTeTunnelCoEgressLSRId,current,,The entry in this table describes Co-routed infomation of bidirectional Tunnel Interface and reserver lsp information.
.1.3.6.1.4.1.11.2.14.11.15.2.115.2.2.1.1,HPN-ICF-TE-TUNNEL-MIB::hpnicfTeTunnelCoIndex,Unsigned32,not-accessible,,current,,Uniquely identifies a set of tunnel instances between a pair of ingress and egress LSRs that specified at originating point. This value should be equal to the value signaled in the Tunnel Id of the Session object.
.1.3.6.1.4.1.11.2.14.11.15.2.115.2.2.1.2,HPN-ICF-TE-TUNNEL-MIB::hpnicfTeTunnelCoLspInstance,Unsigned32,not-accessible,,current,,When obtain infomation of Co-routed bidirectional Tunnel Interface, this vlaue should be zero. And this value must be LspID to obtain reverse crlsp information. Values greater than 0, but less than or equal to 65535, should be useless.
.1.3.6.1.4.1.11.2.14.11.15.2.115.2.2.1.3,HPN-ICF-TE-TUNNEL-MIB::hpnicfTeTunnelCoIngressLSRId,Unsigned32,not-accessible,,current,,Identity the ingress LSR associated with this tunnel instance. This vlaue is equal to the LsrID of originating endpoint.
.1.3.6.1.4.1.11.2.14.11.15.2.115.2.2.1.4,HPN-ICF-TE-TUNNEL-MIB::hpnicfTeTunnelCoEgressLSRId,Unsigned32,not-accessible,,current,,Identity of the egress LSR associated with this tunnel instance. This vlaue is equal to the LsrID of terminating point.
.1.3.6.1.4.1.11.2.14.11.15.2.115.2.2.1.5,HPN-ICF-TE-TUNNEL-MIB::hpnicfTeTunnelCoBiMode,INTEGER,read-only,,current,coroutedActive(1):coroutedPassive(2),This vlaue indicated the bidirection mode of tunnel interface. The valuemust be coroutedActive at the originating point of the tunnel and coroutedPassive at the terminating point.
.1.3.6.1.4.1.11.2.14.11.15.2.115.2.2.1.6,HPN-ICF-TE-TUNNEL-MIB::hpnicfTeTunnelCoReverseLspInstance,Unsigned32,read-only,,current,,This value indicated the reverse lsp instance, and should be equal to obverse lsp instance.
.1.3.6.1.4.1.11.2.14.11.15.2.115.2.2.1.7,HPN-ICF-TE-TUNNEL-MIB::hpnicfTeTunnelCoReverseLspXCPointer,OBJECT,read-only,,current,,This pointer unique index to mplsXCTable of the reverse lsp. The mplsXCTable identifies the segments that compose this tunnel, their characteristics, and relationships to each other. A value of zeroDotZero indicate that there is no crlsp assigned to this.
.1.3.6.1.4.1.11.2.14.11.15.2.115.2.3,HPN-ICF-TE-TUNNEL-MIB::hpnicfTeTunnelPsTable,,not-accessible,,current,,This table defines some objects for managers to obtain TE tunnel Protection Switching group current status information.
.1.3.6.1.4.1.11.2.14.11.15.2.115.2.3.1,HPN-ICF-TE-TUNNEL-MIB::hpnicfTeTunnelPsEntry,,not-accessible,hpnicfTeTunnelPsIndex:hpnicfTeTunnelPsIngressLSRId:hpnicfTeTunnelPsEgressLSRId,current,,The entry in this table describes TE tunnel Protection Switching group infromation.
.1.3.6.1.4.1.11.2.14.11.15.2.115.2.3.1.1,HPN-ICF-TE-TUNNEL-MIB::hpnicfTeTunnelPsIndex,Unsigned32,not-accessible,,current,,Uniquely identifies a TE tunnel Protection Switching group instance. This value must be equal to the tunnel id of work tunnel instance.
.1.3.6.1.4.1.11.2.14.11.15.2.115.2.3.1.2,HPN-ICF-TE-TUNNEL-MIB::hpnicfTeTunnelPsIngressLSRId,Unsigned32,not-accessible,,current,,Identity the ingress LSR associated with work tunnel instance.
.1.3.6.1.4.1.11.2.14.11.15.2.115.2.3.1.3,HPN-ICF-TE-TUNNEL-MIB::hpnicfTeTunnelPsEgressLSRId,Unsigned32,not-accessible,,current,,Identity of the egress LSR associated with work tunnel instance.
.1.3.6.1.4.1.11.2.14.11.15.2.115.2.3.1.4,HPN-ICF-TE-TUNNEL-MIB::hpnicfTeTunnelPsProtectIndex,Unsigned32,read-only,,current,,Uniquely identifies a TE tunnel Protection Switching group instance. This value must be equal to the tunnel id of TE tunnel Protection Switching group instance.
.1.3.6.1.4.1.11.2.14.11.15.2.115.2.3.1.5,HPN-ICF-TE-TUNNEL-MIB::hpnicfTeTunnelPsProtectIngressLSRId,Unsigned32,read-only,,current,,Identity the ingress LSR associated with TE tunnel Protection Switching group instance.
.1.3.6.1.4.1.11.2.14.11.15.2.115.2.3.1.6,HPN-ICF-TE-TUNNEL-MIB::hpnicfTeTunnelPsProtectEgressLSRId,Unsigned32,read-only,,current,,Identity of the egress LSR associated with TE tunnel Protection Switching group instance.
.1.3.6.1.4.1.11.2.14.11.15.2.115.2.3.1.7,HPN-ICF-TE-TUNNEL-MIB::hpnicfTeTunnelPsProtectType,INTEGER,read-only,,current,oneToOne(1):onePlusOne(2),This value indicated TE tunnel Protection Switching group type. The default value is oneToOne.
.1.3.6.1.4.1.11.2.14.11.15.2.115.2.3.1.8,HPN-ICF-TE-TUNNEL-MIB::hpnicfTeTunnelPsRevertiveMode,INTEGER,read-only,,current,revertive(1):noRevertive(2),This value indicated protect switch mode. The value must be revertive or nonRevertive, default value is revertive. 
.1.3.6.1.4.1.11.2.14.11.15.2.115.2.3.1.9,HPN-ICF-TE-TUNNEL-MIB::hpnicfTeTunnelPsWtrTime,Unsigned32,read-only,,current,,The cycle time that switch to protect tunnel.
.1.3.6.1.4.1.11.2.14.11.15.2.115.2.3.1.10,HPN-ICF-TE-TUNNEL-MIB::hpnicfTeTunnelPsHoldOffTime,Unsigned32,read-only,,current,,This value is switchback delay time. When detected the work path fault, switch to protect path after this time.
.1.3.6.1.4.1.11.2.14.11.15.2.115.2.3.1.11,HPN-ICF-TE-TUNNEL-MIB::hpnicfTeTunnelPsSwitchMode,INTEGER,read-only,,current,uniDirectional(1):biDirectional(2),This value indicated TE tunnel Protection Switching group switch mode.
.1.3.6.1.4.1.11.2.14.11.15.2.115.2.3.1.12,HPN-ICF-TE-TUNNEL-MIB::hpnicfTeTunnelPsWorkPathStatus,INTEGER,read-only,,current,none(1):noDefect(2):inDefect(3),This value indicates work path status. none, noDefect, inDefect will be used.
.1.3.6.1.4.1.11.2.14.11.15.2.115.2.3.1.13,HPN-ICF-TE-TUNNEL-MIB::hpnicfTeTunnelPsProtectPathStatus,INTEGER,read-only,,current,none(1):noDefect(2):inDefect(3),This value indicates protect path status. none, noDefect, inDefect(3) will be used.
.1.3.6.1.4.1.11.2.14.11.15.2.115.2.3.1.14,HPN-ICF-TE-TUNNEL-MIB::hpnicfTeTunnelPsSwitchResult,INTEGER,read-only,,current,workPath(1):protectPath(2),This value indicated current using path is work path or protect path.
.1.3.6.1.4.1.11.2.14.11.15.2.115.3,HPN-ICF-TE-TUNNEL-MIB::hpnicfTeTunnelNotifications,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.2.115.3.0,HPN-ICF-TE-TUNNEL-MIB::hpnicfTeTunnelNotificationsPrefix,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.2.115.3.0.1,HPN-ICF-TE-TUNNEL-MIB::hpnicfTeTunnelPsSwitchWtoP,,,,,,This notification is generated when protect workgroup switch from work tunnel to protect tunnel.
.1.3.6.1.4.1.11.2.14.11.15.2.115.3.0.2,HPN-ICF-TE-TUNNEL-MIB::hpnicfTeTunnelPsSwitchPtoW,,,,,,This notification is generated when protect workgroup switch from protect tunnel to work tunnel.
.1.3.6.1.4.1.11.2.14.11.15.2.115.4,HPN-ICF-TE-TUNNEL-MIB::hpnicfTeTunnelConformance,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.2.115.4.1,HPN-ICF-TE-TUNNEL-MIB::hpnicfTeTunnelCompliances,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.2.115.4.1.1,HPN-ICF-TE-TUNNEL-MIB::hpnicfTeTunnelCompliance,,,,,,The compliance statement for SNMP.
.1.3.6.1.4.1.11.2.14.11.15.2.115.4.2,HPN-ICF-TE-TUNNEL-MIB::hpnicfTeTunnelGroups,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.2.115.4.2.1,HPN-ICF-TE-TUNNEL-MIB::hpnicfTeTunnelNotificationsGroup,,,,,,This group contains MPLS Te Tunnel traps.
.1.3.6.1.4.1.11.2.14.11.15.2.115.4.2.2,HPN-ICF-TE-TUNNEL-MIB::hpnicfTeTunnelScalarsGroup,,,,,,Scalar object needed to implement MPLS te tunnels.
.1.3.6.1.4.1.11.2.14.11.15.2.115.4.2.3,HPN-ICF-TE-TUNNEL-MIB::hpnicfTeTunnelStaticCrlspGroup,,,,,,Objects for quering static-crlsp information.
.1.3.6.1.4.1.11.2.14.11.15.2.115.4.2.4,HPN-ICF-TE-TUNNEL-MIB::hpnicfTeTunnelCorouteGroup,,,,,,Objects for quering Co-routed reverse crlsp information.
.1.3.6.1.4.1.11.2.14.11.15.2.115.4.2.5,HPN-ICF-TE-TUNNEL-MIB::hpnicfTeTunnelPsGroup,,,,,,Objects for quering protect workgroup information.
.1.3.6.1.4.1.11.2.14.11.15.2.116,HPN-ICF-OID-MIB::hpnicfLB,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.2.116.1,HPN-ICF-LB-MIB::hpnicfLBTables,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.2.116.1.1,HPN-ICF-LB-MIB::hpnicfLBRealServerGroupTable,,not-accessible,,current,,Real server group table for loadbalance.
.1.3.6.1.4.1.11.2.14.11.15.2.116.1.1.1,HPN-ICF-LB-MIB::hpnicfLBRealServerGroupEntry,,not-accessible,hpnicfLBRealServerGroupName,current,,An entry contains the information of the real server group.
.1.3.6.1.4.1.11.2.14.11.15.2.116.1.1.1.1,HPN-ICF-LB-MIB::hpnicfLBRealServerGroupName,OCTET,accessible-for-notify,,current,,Real server group name.
.1.3.6.1.4.1.11.2.14.11.15.2.116.1.2,HPN-ICF-LB-MIB::hpnicfLBRealServerTable,,not-accessible,,current,,Real server table for loadbalance.
.1.3.6.1.4.1.11.2.14.11.15.2.116.1.2.1,HPN-ICF-LB-MIB::hpnicfLBRealServerEntry,,not-accessible,hpnicfLBRealServerGroupName:hpnicfLBRealServerName,current,,An entry contains the information of the real server.
.1.3.6.1.4.1.11.2.14.11.15.2.116.1.2.1.1,HPN-ICF-LB-MIB::hpnicfLBRealServerName,OCTET,accessible-for-notify,,current,,Real server name.
.1.3.6.1.4.1.11.2.14.11.15.2.116.1.2.1.2,HPN-ICF-LB-MIB::hpnicfLBRealServerStatus,INTEGER,read-write,,current,enabled(1):disabled(2):slowdown(3),A list of real server status type. enabled: the real server is enabled. disabled: the real server is disabled, the loadbalance device does not assign any traffic to the real server. slowdown: the real server continues to process the existed session previously assigned to it, but the loadbalance device does not assign any new session to the real server.
.1.3.6.1.4.1.11.2.14.11.15.2.116.1.2.1.3,HPN-ICF-LB-MIB::hpnicfLBRealServerConnectNumber,Integer32,read-only,,current,,The connection number of real server.
.1.3.6.1.4.1.11.2.14.11.15.2.116.2,HPN-ICF-LB-MIB::hpnicfLBTrap,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.2.116.2.0,HPN-ICF-LB-MIB::hpnicfLBTrapPrex,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.2.116.2.0.1,HPN-ICF-LB-MIB::hpnicfLBRealServerOverLoad,,,,,,This trap is sent when the real server is overloaded.
.1.3.6.1.4.1.11.2.14.11.15.2.117,HPN-ICF-OID-MIB::hpnicfDldp2,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.2.117.1,HPN-ICF-DLDP2-MIB::hpnicfDldp2ScalarGroup,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.2.117.1.1,HPN-ICF-DLDP2-MIB::hpnicfDldp2GlobalEnable,INTEGER,read-write,,current,true(1):false(2),Enable(true) or disable(false) DLDP on the device.
.1.3.6.1.4.1.11.2.14.11.15.2.117.1.2,HPN-ICF-DLDP2-MIB::hpnicfDldp2Interval,Integer32,read-write,,current,,Indicates the advertisement packet sending interval.
.1.3.6.1.4.1.11.2.14.11.15.2.117.1.3,HPN-ICF-DLDP2-MIB::hpnicfDldp2AuthMode,INTEGER,read-write,,current,unknown(1):none(2):simple(3):md5(4),Indicates the authentication mode. unknown: cannot be determined for some reason. none: not authenticated. simple: authenticated by a clear text password. md5: authenticated by MD5 digest.
.1.3.6.1.4.1.11.2.14.11.15.2.117.1.4,HPN-ICF-DLDP2-MIB::hpnicfDldp2AuthPassword,OCTET,read-write,,current,,Indicates the authentication password. Setting the password to a zero-length octet string means deleting the password. When read, it always returns a zero-length octet string.
.1.3.6.1.4.1.11.2.14.11.15.2.117.1.5,HPN-ICF-DLDP2-MIB::hpnicfDldp2UniShutdown,INTEGER,read-write,,current,unknown(1):auto(2):manual(3),Indicates the shutdown mode when a unidirectional link has been detected. unknown: cannot be determined for some reason. auto: the port will be shutdown automatically. manual: the port must be shut down manually.
.1.3.6.1.4.1.11.2.14.11.15.2.117.2,HPN-ICF-DLDP2-MIB::hpnicfDldp2TableGroup,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.2.117.2.1,HPN-ICF-DLDP2-MIB::hpnicfDldp2PortConfigTable,,not-accessible,,current,,This table contains all ports that support DLDP.
.1.3.6.1.4.1.11.2.14.11.15.2.117.2.1.1,HPN-ICF-DLDP2-MIB::hpnicfDldp2PortConfigEntry,,not-accessible,ifIndex,current,,This entry describes a port that supports DLDP.
.1.3.6.1.4.1.11.2.14.11.15.2.117.2.1.1.1,HPN-ICF-DLDP2-MIB::hpnicfDldp2PortEnable,INTEGER,read-write,,current,true(1):false(2),Enable(true) or disable(false) DLDP on a port.
.1.3.6.1.4.1.11.2.14.11.15.2.117.2.2,HPN-ICF-DLDP2-MIB::hpnicfDldp2PortStatusTable,,not-accessible,,current,,This table contains all ports enabled with DLDP.
.1.3.6.1.4.1.11.2.14.11.15.2.117.2.2.1,HPN-ICF-DLDP2-MIB::hpnicfDldp2PortStatusEntry,,not-accessible,ifIndex,current,,This entry describes a port enabled with DLDP.
.1.3.6.1.4.1.11.2.14.11.15.2.117.2.2.1.1,HPN-ICF-DLDP2-MIB::hpnicfDldp2PortOperStatus,INTEGER,read-only,,current,unknown(1):initial(2):inactive(3):unidirectional(4):bidirectional(5),Indicates the DLDP operating status on the port. unknown: cannot be determined for some reason. initial: DLDP is not globally enabled. inactive: physical status of the port is down. unidirectional: all neighbors of the port are in 'unconfirmed' status. bidirectional: more than one neighbor of the port is in 'confirmed' status.
.1.3.6.1.4.1.11.2.14.11.15.2.117.2.2.1.2,HPN-ICF-DLDP2-MIB::hpnicfDldp2PortLinkStatus,INTEGER,read-only,,current,unknown(1):down(2):up(3),Indicates the DLDP link status of the port. unknown: cannot be determined for some reason. down: the DLDP link status of the port is down. up: the DLDP link status of the port is up. If the port operating status is not 'inactive', 'unidirectional', or 'bidirectional', it always returns 'unknown'.
.1.3.6.1.4.1.11.2.14.11.15.2.117.2.3,HPN-ICF-DLDP2-MIB::hpnicfDldp2NeighborTable,,not-accessible,,current,,This table contains all port's neighbors.
.1.3.6.1.4.1.11.2.14.11.15.2.117.2.3.1,HPN-ICF-DLDP2-MIB::hpnicfDldp2NeighborEntry,,not-accessible,ifIndex:hpnicfDldp2NeighborBridgeMac:hpnicfDldp2NeighborPortIndex,current,,This entry describes a port's neighbors.
.1.3.6.1.4.1.11.2.14.11.15.2.117.2.3.1.1,HPN-ICF-DLDP2-MIB::hpnicfDldp2NeighborBridgeMac,OCTET,not-accessible,,current,,Indicates the bridge MAC address of a neighbor.
.1.3.6.1.4.1.11.2.14.11.15.2.117.2.3.1.2,HPN-ICF-DLDP2-MIB::hpnicfDldp2NeighborPortIndex,Integer32,not-accessible,,current,,Indicates the port index of a neighbor.
.1.3.6.1.4.1.11.2.14.11.15.2.117.2.3.1.3,HPN-ICF-DLDP2-MIB::hpnicfDldp2NeighborStatus,INTEGER,read-only,,current,unknown(1):unconfirmed(2):confirmed(3),Indicates the status of a neighbor. unknown: cannot be determined for some reason. unconfirmed: unidirectional communication between the port and its neighbor. confirmed: bidirectional communication between the port and its neighbor.
.1.3.6.1.4.1.11.2.14.11.15.2.117.2.3.1.4,HPN-ICF-DLDP2-MIB::hpnicfDldp2NeighborAgingTime,Integer32,read-only,,current,,Indicates the aging time of a neighbor. If the neighbor status is not 'confirmed', it always returns 0.
.1.3.6.1.4.1.11.2.14.11.15.2.117.3,HPN-ICF-DLDP2-MIB::hpnicfDldp2TrapBindObjects,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.2.117.4,HPN-ICF-DLDP2-MIB::hpnicfDldp2Trap,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.2.117.4.0,HPN-ICF-DLDP2-MIB::hpnicfDldp2TrapPrefix,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.2.117.4.0.1,HPN-ICF-DLDP2-MIB::hpnicfDldp2TrapUniLink,,,,,,This trap is generated when DLDP detects a unidirectional link, ifIndex and ifDescr identify the port.
.1.3.6.1.4.1.11.2.14.11.15.2.117.4.0.2,HPN-ICF-DLDP2-MIB::hpnicfDldp2TrapBidLink,,,,,,This trap is generated when DLDP detects a bidirectional link, ifIndex and ifDescr identify the port.
.1.3.6.1.4.1.11.2.14.11.15.2.118,HPN-ICF-OID-MIB::hpnicfWIPS,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.2.118.1,HPN-ICF-WIPS-MIB::hpnicfWIPSConfigGroup,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.2.118.1.1,HPN-ICF-WIPS-MIB::hpnicfWIPSGlobalConfigGroup,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.2.118.1.1.1,HPN-ICF-WIPS-MIB::hpnicfWIPSEnable,INTEGER,read-write,,current,true(1):false(2),Represents whether the WIPS feature is enabled or not. 'true': enable the WIPS feature. 'false': disable the WIPS feature.
.1.3.6.1.4.1.11.2.14.11.15.2.118.1.1.2,HPN-ICF-WIPS-MIB::hpnicfWIPSSensorLicenseNum,Unsigned32,read-only,,current,,Represents the number of sensor license.
.1.3.6.1.4.1.11.2.14.11.15.2.118.1.1.3,HPN-ICF-WIPS-MIB::hpnicfWIPSBlocklistAction,INTEGER,read-write,,current,block(1):unblock(2),Represents whether the block list feature is enabled or not. 'block' : Enable the block list feature to filter unwanted devices. 'unblock' : Disable the block list feature.
.1.3.6.1.4.1.11.2.14.11.15.2.118.1.1.4,HPN-ICF-WIPS-MIB::hpnicfWIPSAPInactiveTime,Integer32,read-write,,current,,Represents the time for AP getting inactive.
.1.3.6.1.4.1.11.2.14.11.15.2.118.1.1.5,HPN-ICF-WIPS-MIB::hpnicfWIPSSTAInactiveTime,Integer32,read-write,,current,,Represents the time for STA getting inactive.
.1.3.6.1.4.1.11.2.14.11.15.2.118.1.1.6,HPN-ICF-WIPS-MIB::hpnicfWIPSDevAgingTime,Integer32,read-write,,current,,Represents the time for device getting aged.
.1.3.6.1.4.1.11.2.14.11.15.2.118.1.1.7,HPN-ICF-WIPS-MIB::hpnicfWIPSStatisticPeriod,Integer32,read-write,,current,,Represents the period of WIPS reporting the statistic.
.1.3.6.1.4.1.11.2.14.11.15.2.118.1.1.8,HPN-ICF-WIPS-MIB::hpnicfWIPSReclassificationPeriod,Integer32,read-write,,current,,Represents the period of WIPS reclassifying devices.
.1.3.6.1.4.1.11.2.14.11.15.2.118.1.1.9,HPN-ICF-WIPS-MIB::hpnicfWIPSResetAllTrustList,INTEGER,read-write,,current,true(1):false(2),This object is used to remove all entries from the static trust list. It will return false for get operation.
.1.3.6.1.4.1.11.2.14.11.15.2.118.1.1.10,HPN-ICF-WIPS-MIB::hpnicfWIPSResetAllBlockList,INTEGER,read-write,,current,true(1):false(2),This object is used to remove all entries from the static block list. It will return false for get operation.
.1.3.6.1.4.1.11.2.14.11.15.2.118.1.1.11,HPN-ICF-WIPS-MIB::hpnicfWIPSResetAllIgnoreList,INTEGER,read-write,,current,true(1):false(2),This object is used to remove all entries from the ignore list. It will return false for get operation..
.1.3.6.1.4.1.11.2.14.11.15.2.118.1.1.12,HPN-ICF-WIPS-MIB::hpnicfWIPSResetAllCtmList,INTEGER,read-write,,current,true(1):false(2),This object is used to remove all entries from the static countermeasure list. It will return false for get operation.
.1.3.6.1.4.1.11.2.14.11.15.2.118.1.1.13,HPN-ICF-WIPS-MIB::hpnicfWIPSPermitChlBitMap,OCTET,read-write,,current,,Represents the permit channel number by bitmap.
.1.3.6.1.4.1.11.2.14.11.15.2.118.1.1.14,HPN-ICF-WIPS-MIB::hpnicfWIPSDynamicTrustListAgingTime,Integer32,read-write,,current,,Represents the time for devices in the dynamic trust list getting aged.
.1.3.6.1.4.1.11.2.14.11.15.2.118.1.1.15,HPN-ICF-WIPS-MIB::hpnicfWIPSDevUpdateTime,Integer32,read-write,,current,,Represents the period of WIPS update the status of devices.
.1.3.6.1.4.1.11.2.14.11.15.2.118.1.1.16,HPN-ICF-WIPS-MIB::hpnicfWIPSADOSEnable,INTEGER,read-write,,current,true(1):false(2),Represents whether enable the ADOS feature. 'true': enable the ADOS feature. 'false': disable the ADOS feature.
.1.3.6.1.4.1.11.2.14.11.15.2.118.1.1.17,HPN-ICF-WIPS-MIB::hpnicfWIPSAccessFlowScanEnable,INTEGER,read-write,,current,true(1):false(2),Represents whether the WIPS scanning feature during the access flow is enabled or not. 'true': enable the feature. 'false': disable the feature.
.1.3.6.1.4.1.11.2.14.11.15.2.118.1.2,HPN-ICF-WIPS-MIB::hpnicfWIPSVsdConfigGroup,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.2.118.1.2.1,HPN-ICF-WIPS-MIB::hpnicfWIPSVsdTable,,not-accessible,,current,,The table provides the list of virtual security domain.
.1.3.6.1.4.1.11.2.14.11.15.2.118.1.2.1.1,HPN-ICF-WIPS-MIB::hpnicfWIPSVsdEntry,,not-accessible,hpnicfWIPSVsdNameCfg,current,,Each entry contains information of each VSD.
.1.3.6.1.4.1.11.2.14.11.15.2.118.1.2.1.1.1,HPN-ICF-WIPS-MIB::hpnicfWIPSVsdNameCfg,OCTET,not-accessible,,current,,Represents the name of virtual security domain.
.1.3.6.1.4.1.11.2.14.11.15.2.118.1.2.1.1.2,HPN-ICF-WIPS-MIB::hpnicfWIPSVsdRowStatus,INTEGER,read-create,,current,active(1):notInService(2):notReady(3):createAndGo(4):createAndWait(5):destroy(6),The status of this table entry.
.1.3.6.1.4.1.11.2.14.11.15.2.118.1.2.1.1.3,HPN-ICF-WIPS-MIB::hpnicfWIPSVsdAtkDctPolicyNameCfg,OCTET,read-create,,current,,Represents the name of attack detect policy attached to the VSD.
.1.3.6.1.4.1.11.2.14.11.15.2.118.1.2.1.1.4,HPN-ICF-WIPS-MIB::hpnicfWIPSVsdCtmPolicyNameCfg,OCTET,read-create,,current,,Represents the name of countermeasure policy attached to the VSD.
.1.3.6.1.4.1.11.2.14.11.15.2.118.1.2.1.1.5,HPN-ICF-WIPS-MIB::hpnicfWIPSVsdSigPolicyNameCfg,OCTET,read-create,,current,,Represents the name of signature policy attached to the VSD
.1.3.6.1.4.1.11.2.14.11.15.2.118.1.2.1.1.6,HPN-ICF-WIPS-MIB::hpnicfWIPSVsdMalPktPolicyNameCfg,OCTET,read-create,,current,,Represents the name of malformed packet detect policy attached to the VSD
.1.3.6.1.4.1.11.2.14.11.15.2.118.1.2.2,HPN-ICF-WIPS-MIB::hpnicfWIPSRule2VsdTable,,not-accessible,,current,,The table defines the AP classification rules been attached to the VSD. 
.1.3.6.1.4.1.11.2.14.11.15.2.118.1.2.2.1,HPN-ICF-WIPS-MIB::hpnicfWIPSRule2VsdEntry,,not-accessible,hpnicfWIPSVsdNameCfg:hpnicfWIPSRule2VsdAPClaRuleNameCfg,current,,Each entry contains information of each AP classification rule in each VSD. 
.1.3.6.1.4.1.11.2.14.11.15.2.118.1.2.2.1.1,HPN-ICF-WIPS-MIB::hpnicfWIPSRule2VsdAPClaRuleNameCfg,OCTET,not-accessible,,current,,Represents the name of AP classification rule attached to the VSD.
.1.3.6.1.4.1.11.2.14.11.15.2.118.1.2.2.1.2,HPN-ICF-WIPS-MIB::hpnicfWIPSRule2VsdRowStatus,INTEGER,read-create,,current,active(1):notInService(2):notReady(3):createAndGo(4):createAndWait(5):destroy(6),The status of this table entry.
.1.3.6.1.4.1.11.2.14.11.15.2.118.1.2.2.1.3,HPN-ICF-WIPS-MIB::hpnicfWIPSRule2VsdPrecedence,Integer32,read-create,,current,,Represents the precedence of AP classification rule attached to the VSD.
.1.3.6.1.4.1.11.2.14.11.15.2.118.1.2.3,HPN-ICF-WIPS-MIB::hpnicfWIPSSensor2VsdTable,,not-accessible,,current,,The table defines the sensor been attached to the VSD. 
.1.3.6.1.4.1.11.2.14.11.15.2.118.1.2.3.1,HPN-ICF-WIPS-MIB::hpnicfWIPSSensor2VsdEntry,,not-accessible,hpnicfWIPSVsdNameCfg:hpnicfWIPSSensorNameCfg,current,,Each entry contains information of each sensor in each VSD.
.1.3.6.1.4.1.11.2.14.11.15.2.118.1.2.3.1.1,HPN-ICF-WIPS-MIB::hpnicfWIPSSensorNameCfg,OCTET,not-accessible,,current,,Represents the name of sensor attached to the VSD.
.1.3.6.1.4.1.11.2.14.11.15.2.118.1.2.3.1.2,HPN-ICF-WIPS-MIB::hpnicfWIPSSensor2VsdRowStatus,INTEGER,read-create,,current,active(1):notInService(2):notReady(3):createAndGo(4):createAndWait(5):destroy(6),The status of this table entry.
.1.3.6.1.4.1.11.2.14.11.15.2.118.1.2.3.1.3,HPN-ICF-WIPS-MIB::hpnicfWIPSSensorState,INTEGER,read-create,,current,running(1):idle(2),Represents the running state of the sensor. It will return false for set operation.
.1.3.6.1.4.1.11.2.14.11.15.2.118.1.2.4,HPN-ICF-WIPS-MIB::hpnicfWIPSSensorRadioTable,,not-accessible,,current,,The table represents the list of sensor radio information.
.1.3.6.1.4.1.11.2.14.11.15.2.118.1.2.4.1,HPN-ICF-WIPS-MIB::hpnicfWIPSSensorRadioEntry,,not-accessible,hpnicfWIPSVsdNameCfg:hpnicfWIPSSensorNameCfg:hpnicfWIPSSensorRadioRadioId,current,,Each entry contains information of a radio of a sensor.
.1.3.6.1.4.1.11.2.14.11.15.2.118.1.2.4.1.1,HPN-ICF-WIPS-MIB::hpnicfWIPSSensorRadioRadioId,Integer32,not-accessible,,current,,Represents the radio identifier of the sensor.
.1.3.6.1.4.1.11.2.14.11.15.2.118.1.2.4.1.2,HPN-ICF-WIPS-MIB::hpnicfWIPSSensorRadioScanMode,INTEGER,read-only,,current,accessFirst(1):detectFirst(2):middle(3):detectOnly(4),Represents the scanning mode configured to the radio.
.1.3.6.1.4.1.11.2.14.11.15.2.118.1.3,HPN-ICF-WIPS-MIB::hpnicfWIPSAPClaRuleTable,,not-accessible,,current,,The table defines the parameters for WIPS AP classification rule. One rule could be assigned to different VSDs. 
.1.3.6.1.4.1.11.2.14.11.15.2.118.1.3.1,HPN-ICF-WIPS-MIB::hpnicfWIPSAPClaRuleEntry,,not-accessible,hpnicfWIPSAPClaRuleName,current,,Each entry contains information of each AP classification rule. 
.1.3.6.1.4.1.11.2.14.11.15.2.118.1.3.1.1,HPN-ICF-WIPS-MIB::hpnicfWIPSAPClaRuleName,OCTET,not-accessible,,current,,Represents the name of AP classification rule.
.1.3.6.1.4.1.11.2.14.11.15.2.118.1.3.1.2,HPN-ICF-WIPS-MIB::hpnicfWIPSAPClaRowStatus,INTEGER,read-create,,current,active(1):notInService(2):notReady(3):createAndGo(4):createAndWait(5):destroy(6),The status of this table entry.
.1.3.6.1.4.1.11.2.14.11.15.2.118.1.3.1.3,HPN-ICF-WIPS-MIB::hpnicfWIPSAPClaSeverityLevel,Unsigned32,read-create,,current,,Represents the severity level of the AP classification rule. Available value limits from 0 to 100.
.1.3.6.1.4.1.11.2.14.11.15.2.118.1.3.1.4,HPN-ICF-WIPS-MIB::hpnicfWIPSAPClaRuleMatchAll,INTEGER,read-create,,current,true(1):false(2),Represents whether match all the AP classification sub-rules which have been configured.
.1.3.6.1.4.1.11.2.14.11.15.2.118.1.3.1.5,HPN-ICF-WIPS-MIB::hpnicfWIPSAPClaType,INTEGER,read-create,,current,other(1):authorized(2):external(3):misconfigured(4):rogue(5),Represents the type of AP classification.
.1.3.6.1.4.1.11.2.14.11.15.2.118.1.3.1.6,HPN-ICF-WIPS-MIB::hpnicfWIPSAPClaSubRuleSSIDOperator,INTEGER,read-create,,current,include(1):notinclude(2):equal(3):notequal(4),Represents the compare way of the SSID in the sub rule, including include/not include/equal/not equal.
.1.3.6.1.4.1.11.2.14.11.15.2.118.1.3.1.7,HPN-ICF-WIPS-MIB::hpnicfWIPSAPClaSubRuleSSIDCase,INTEGER,read-create,,current,true(1):false(2),Represents the case sensitive or not for the SSID match. 'true': Case insensitive. 'false': Case sensitive.
.1.3.6.1.4.1.11.2.14.11.15.2.118.1.3.1.8,HPN-ICF-WIPS-MIB::hpnicfWIPSAPClaSubRuleSSID,OCTET,read-create,,current,,Represents the SSID match template in the ap classification rule.
.1.3.6.1.4.1.11.2.14.11.15.2.118.1.3.1.9,HPN-ICF-WIPS-MIB::hpnicfWIPSSecurityType,Unsigned32,read-create,,current,,Represents the security type of active AP. 
.1.3.6.1.4.1.11.2.14.11.15.2.118.1.3.1.10,HPN-ICF-WIPS-MIB::hpnicfWIPSSecurityTypeMatch,INTEGER,read-create,,current,equal(1):include(2),Represents match way of the security type of active AP. 
.1.3.6.1.4.1.11.2.14.11.15.2.118.1.3.1.11,HPN-ICF-WIPS-MIB::hpnicfWIPSAPAuthType,INTEGER,read-create,,current,none(1):psk(2):dot1x(3):other(4):undo(5),Represents the authentication type of the AP. undo - represents undo operation
.1.3.6.1.4.1.11.2.14.11.15.2.118.1.3.1.12,HPN-ICF-WIPS-MIB::hpnicfWIPSMaxRSSIValue,Unsigned32,read-create,,current,,Represents the high-limit of the RSSI of AP. Available value limits from 1 to 90.
.1.3.6.1.4.1.11.2.14.11.15.2.118.1.3.1.13,HPN-ICF-WIPS-MIB::hpnicfWIPSMinRSSIValue,Unsigned32,read-create,,current,,Represents the low-limit of the RSSI of AP. Available value limits from 0 to 89.
.1.3.6.1.4.1.11.2.14.11.15.2.118.1.3.1.14,HPN-ICF-WIPS-MIB::hpnicfWIPSMaxDuration,Unsigned32,read-create,,current,,Represents the high-limit of the duration of AP. Available value limits from 1 to 2592000.
.1.3.6.1.4.1.11.2.14.11.15.2.118.1.3.1.15,HPN-ICF-WIPS-MIB::hpnicfWIPSMinDuration,Unsigned32,read-create,,current,,Represents the low-limit of the duration of AP. Available value limits from 0 to 2591999.
.1.3.6.1.4.1.11.2.14.11.15.2.118.1.3.1.16,HPN-ICF-WIPS-MIB::hpnicfWIPSMaxAPNum,Unsigned32,read-create,,current,,Represents the high-limit of the number of AP. Available value limits from 1 to 128.
.1.3.6.1.4.1.11.2.14.11.15.2.118.1.3.1.17,HPN-ICF-WIPS-MIB::hpnicfWIPSMinAPNum,Unsigned32,read-create,,current,,Represents the low-limit of the number of AP. Available value limits from 0 to 127.
.1.3.6.1.4.1.11.2.14.11.15.2.118.1.3.1.18,HPN-ICF-WIPS-MIB::hpnicfWIPSMaxClientNum,Unsigned32,read-create,,current,,Represents the high-limit of the number of client. Available value limits from 1 to 128.
.1.3.6.1.4.1.11.2.14.11.15.2.118.1.3.1.19,HPN-ICF-WIPS-MIB::hpnicfWIPSMinClientNum,Unsigned32,read-create,,current,,Represents the low-limit of the number of client. Available value limits from 0 to 127.
.1.3.6.1.4.1.11.2.14.11.15.2.118.1.3.1.20,HPN-ICF-WIPS-MIB::hpnicfWIPSOUIInfo,OCTET,read-create,,current,,Represents the OUI hexadecimal string of the AP.
.1.3.6.1.4.1.11.2.14.11.15.2.118.1.3.1.21,HPN-ICF-WIPS-MIB::hpnicfWIPSVendorInfo,OCTET,read-create,,current,,Represents the vendor info of the AP.
.1.3.6.1.4.1.11.2.14.11.15.2.118.1.4,HPN-ICF-WIPS-MIB::hpnicfWIPSAtkDctPolicyCfgGroup,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.2.118.1.4.1,HPN-ICF-WIPS-MIB::hpnicfWIPSAtkDctPolicyCfgSupportSet,OCTET,read-only,,current,,Represents the bit string of supported attack detect policy. The specific attack detect policy is supported if its corresponding bit is set to 1; otherwise its corresponding bit is set to 0. bit0: adhoc bit1: ap-spoof bit2: client-spoof bit3: prohibited channel bit4: ap-flood bit5: eapol-start bit6: authentication bit7: association bit8: reassociation bit9: weak-IV bit10: invalid-OUI
.1.3.6.1.4.1.11.2.14.11.15.2.118.1.4.2,HPN-ICF-WIPS-MIB::hpnicfWIPSAtkDctPolicyCfgTable,,not-accessible,,current,,The table defines the parameters for WIPS attack detect policy.
.1.3.6.1.4.1.11.2.14.11.15.2.118.1.4.2.1,HPN-ICF-WIPS-MIB::hpnicfWIPSAtkDctPolicyCfgEntry,,not-accessible,hpnicfWIPSAtkDctPolicyName,current,,Each entry contains information of each attack detect policy.
.1.3.6.1.4.1.11.2.14.11.15.2.118.1.4.2.1.1,HPN-ICF-WIPS-MIB::hpnicfWIPSAtkDctPolicyName,OCTET,not-accessible,,current,,Represents the name of attack detect policy.
.1.3.6.1.4.1.11.2.14.11.15.2.118.1.4.2.1.2,HPN-ICF-WIPS-MIB::hpnicfWIPSAtkDctPolicyCfgRowStatus,INTEGER,read-create,,current,active(1):notInService(2):notReady(3):createAndGo(4):createAndWait(5):destroy(6),The status of this table entry.
.1.3.6.1.4.1.11.2.14.11.15.2.118.1.4.2.1.3,HPN-ICF-WIPS-MIB::hpnicfWIPSAtkDctPolicyBitString,OCTET,read-create,,current,,Represents the bit string of attack detect policy configuration. The specific attack detect policy is enabled if its corresponding bit is set to 1; disabled if its corresponding bit is set to 0. bit0: adhoc bit1: ap-spoof bit2: client-spoof bit3: prohibited channel bit4: ap-flood bit5: eapol-start bit6: authentication bit7: association bit8: reassociation bit9: weak-IV bit10: invalid-OUI
.1.3.6.1.4.1.11.2.14.11.15.2.118.1.4.2.1.4,HPN-ICF-WIPS-MIB::hpnicfWIPSAtkDctPolicyAPFloodQT,Integer32,read-create,,current,,Represents the quiet time after reporting the AP flood attack event alarm.
.1.3.6.1.4.1.11.2.14.11.15.2.118.1.4.2.1.5,HPN-ICF-WIPS-MIB::hpnicfWIPSAtkDctPolicyAPSpoofQT,Integer32,read-create,,current,,Represents the quiet time after reporting the AP spoofing attack event alarm.
.1.3.6.1.4.1.11.2.14.11.15.2.118.1.4.2.1.6,HPN-ICF-WIPS-MIB::hpnicfWIPSAtkDctPolicyCliSpoofQT,Integer32,read-create,,current,,Represents the quiet time after reporting the client spoofing attack event alarm.
.1.3.6.1.4.1.11.2.14.11.15.2.118.1.4.2.1.7,HPN-ICF-WIPS-MIB::hpnicfWIPSAtkDctPolicyDosAssoQT,Integer32,read-create,,current,,Represents the quiet time after reporting the dos of association attack event alarm.
.1.3.6.1.4.1.11.2.14.11.15.2.118.1.4.2.1.8,HPN-ICF-WIPS-MIB::hpnicfWIPSAtkDctPolicyDosAuthQT,Integer32,read-create,,current,,Represents the quiet time after reporting the dos of authentication attack event alarm.
.1.3.6.1.4.1.11.2.14.11.15.2.118.1.4.2.1.9,HPN-ICF-WIPS-MIB::hpnicfWIPSAtkDctPolicyDosEAPOLStartQT,Integer32,read-create,,current,,Represents the quiet time after reporting the dos of EAPOL-start attack event alarm.
.1.3.6.1.4.1.11.2.14.11.15.2.118.1.4.2.1.10,HPN-ICF-WIPS-MIB::hpnicfWIPSAtkDctPolicyDosReAssoQT,Integer32,read-create,,current,,Represents the quiet time after reporting the dos of reassociation attack event alarm.
.1.3.6.1.4.1.11.2.14.11.15.2.118.1.4.2.1.11,HPN-ICF-WIPS-MIB::hpnicfWIPSAtkDctPolicyWeakIVQT,Integer32,read-create,,current,,Represents the quiet time after reporting the weak-IV event alarm.
.1.3.6.1.4.1.11.2.14.11.15.2.118.1.4.2.1.12,HPN-ICF-WIPS-MIB::hpnicfWIPSAtkDctPolicyInvalidOUIAction,INTEGER,read-create,,current,none(0):rogue(1),Represents the action after detecting the invalid OUI, which classify the device as rogue device.
.1.3.6.1.4.1.11.2.14.11.15.2.118.1.5,HPN-ICF-WIPS-MIB::hpnicfWIPSStaticCtmListCfgTable,,not-accessible,,current,,The table provides the MAC address list of devices in the static countermeasure list.
.1.3.6.1.4.1.11.2.14.11.15.2.118.1.5.1,HPN-ICF-WIPS-MIB::hpnicfWIPSStaticCtmListCfgEntry,,not-accessible,hpnicfWIPSStaticCtmListMAC,current,,Each entry contains information of each MAC address in the static countermeasure list. 
.1.3.6.1.4.1.11.2.14.11.15.2.118.1.5.1.1,HPN-ICF-WIPS-MIB::hpnicfWIPSStaticCtmListMAC,OCTET,not-accessible,,current,,Represents the MAC address in static countermeasure list.
.1.3.6.1.4.1.11.2.14.11.15.2.118.1.5.1.2,HPN-ICF-WIPS-MIB::hpnicfWIPSStaticCtmListRowStatus,INTEGER,read-create,,current,active(1):notInService(2):notReady(3):createAndGo(4):createAndWait(5):destroy(6),The status of this table entry.
.1.3.6.1.4.1.11.2.14.11.15.2.118.1.6,HPN-ICF-WIPS-MIB::hpnicfWIPSStaticBlockListCfgTable,,not-accessible,,current,,The table provides the MAC address list of devices in the static block list. WIPS will ignore the frames from the devices in the list, and take the devices as rogue devices.
.1.3.6.1.4.1.11.2.14.11.15.2.118.1.6.1,HPN-ICF-WIPS-MIB::hpnicfWIPSStaticBlockListCfgEntry,,not-accessible,hpnicfWIPSStaticBlockListMAC,current,,Each entry contains information of each MAC address in the static block list. 
.1.3.6.1.4.1.11.2.14.11.15.2.118.1.6.1.1,HPN-ICF-WIPS-MIB::hpnicfWIPSStaticBlockListMAC,OCTET,not-accessible,,current,,Represents the MAC address in static block list.
.1.3.6.1.4.1.11.2.14.11.15.2.118.1.6.1.2,HPN-ICF-WIPS-MIB::hpnicfWIPSStaticBlockListRowStatus,INTEGER,read-create,,current,active(1):notInService(2):notReady(3):createAndGo(4):createAndWait(5):destroy(6),The status of this table entry.
.1.3.6.1.4.1.11.2.14.11.15.2.118.1.7,HPN-ICF-WIPS-MIB::hpnicfWIPSStaticTrustListCfgTable,,not-accessible,,current,,The table provides the MAC address list of devices in the static trust list. WIPS will take the devices in the list as authorized devices.
.1.3.6.1.4.1.11.2.14.11.15.2.118.1.7.1,HPN-ICF-WIPS-MIB::hpnicfWIPSStaticTrustListCfgEntry,,not-accessible,hpnicfWIPSStaticTrustListMAC,current,,Each entry contains information of each MAC address in the static trust list. 
.1.3.6.1.4.1.11.2.14.11.15.2.118.1.7.1.1,HPN-ICF-WIPS-MIB::hpnicfWIPSStaticTrustListMAC,OCTET,not-accessible,,current,,Represents the MAC address in static trust list.
.1.3.6.1.4.1.11.2.14.11.15.2.118.1.7.1.2,HPN-ICF-WIPS-MIB::hpnicfWIPSStaticTrustListRowStatus,INTEGER,read-create,,current,active(1):notInService(2):notReady(3):createAndGo(4):createAndWait(5):destroy(6),The status of this table entry.
.1.3.6.1.4.1.11.2.14.11.15.2.118.1.8,HPN-ICF-WIPS-MIB::hpnicfWIPSIgnoreListCfgTable,,not-accessible,,current,,The table provides the MAC address list of devices in the ignore list. WIPS will ignore the events caused by the device in the list.
.1.3.6.1.4.1.11.2.14.11.15.2.118.1.8.1,HPN-ICF-WIPS-MIB::hpnicfWIPSIgnoreListCfgEntry,,not-accessible,hpnicfWIPSIgnoreListMAC,current,,Each entry contains information of each MAC address in the ignore list. 
.1.3.6.1.4.1.11.2.14.11.15.2.118.1.8.1.1,HPN-ICF-WIPS-MIB::hpnicfWIPSIgnoreListMAC,OCTET,not-accessible,,current,,Represents the MAC address in ignore list.
.1.3.6.1.4.1.11.2.14.11.15.2.118.1.8.1.2,HPN-ICF-WIPS-MIB::hpnicfWIPSIgnoreListRowStatus,INTEGER,read-create,,current,active(1):notInService(2):notReady(3):createAndGo(4):createAndWait(5):destroy(6),The status of this table entry.
.1.3.6.1.4.1.11.2.14.11.15.2.118.1.9,HPN-ICF-WIPS-MIB::hpnicfWIPSDctModeTable,,not-accessible,,current,,The table represents the list of AP scanning mode configuration on radio.
.1.3.6.1.4.1.11.2.14.11.15.2.118.1.9.1,HPN-ICF-WIPS-MIB::hpnicfWIPSDctModeEntry,,not-accessible,hpnicfWIPSDctModeAPName:hpnicfWIPSDctModeRadio,current,,Each entry contains information of WIPS scanning mode on radio.
.1.3.6.1.4.1.11.2.14.11.15.2.118.1.9.1.1,HPN-ICF-WIPS-MIB::hpnicfWIPSDctModeAPName,OCTET,not-accessible,,current,,Represents the name of AP.
.1.3.6.1.4.1.11.2.14.11.15.2.118.1.9.1.2,HPN-ICF-WIPS-MIB::hpnicfWIPSDctModeRadio,Integer32,not-accessible,,current,,Represents the radio of AP.
.1.3.6.1.4.1.11.2.14.11.15.2.118.1.9.1.3,HPN-ICF-WIPS-MIB::hpnicfWIPSDctModeScanMode,INTEGER,read-create,,current,accessFirst(1):detectFirst(2):middle(3):detectOnly(4),Represents the scanning mode. The radio enable-disable status must be disabled before WIPS scanning mode is configured on this radio. The mesh feature must be disabled before any WIPS scanning mode is set on radio. This radio can not apply any service template before the detectOnly scanning mode is set on the radio. 
.1.3.6.1.4.1.11.2.14.11.15.2.118.1.9.1.4,HPN-ICF-WIPS-MIB::hpnicfWIPSDctModeRowStatus,INTEGER,read-create,,current,active(1):notInService(2):notReady(3):createAndGo(4):createAndWait(5):destroy(6),The status of this table entry.
.1.3.6.1.4.1.11.2.14.11.15.2.118.1.10,HPN-ICF-WIPS-MIB::hpnicfWIPSSigConfigGroup,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.2.118.1.10.1,HPN-ICF-WIPS-MIB::hpnicfWIPSSigPolicyTable,,not-accessible,,current,,The table defines the parameters for WIPS signature policy. One policy could be assigned to different VSDs. 
.1.3.6.1.4.1.11.2.14.11.15.2.118.1.10.1.1,HPN-ICF-WIPS-MIB::hpnicfWIPSSigPolicyEntry,,not-accessible,hpnicfWIPSSigPolicyNameCfg,current,,Each entry contains information of each signature policy.
.1.3.6.1.4.1.11.2.14.11.15.2.118.1.10.1.1.1,HPN-ICF-WIPS-MIB::hpnicfWIPSSigPolicyNameCfg,OCTET,not-accessible,,current,,Represents the name of signature policy.
.1.3.6.1.4.1.11.2.14.11.15.2.118.1.10.1.1.2,HPN-ICF-WIPS-MIB::hpnicfWIPSSigPolicyRowStatus,INTEGER,read-create,,current,active(1):notInService(2):notReady(3):createAndGo(4):createAndWait(5):destroy(6),The status of this table entry.
.1.3.6.1.4.1.11.2.14.11.15.2.118.1.10.2,HPN-ICF-WIPS-MIB::hpnicfWIPSSigRule2PolicyTable,,not-accessible,,current,,The table defines the signature rules been attached to the signature policy. 
.1.3.6.1.4.1.11.2.14.11.15.2.118.1.10.2.1,HPN-ICF-WIPS-MIB::hpnicfWIPSSigRule2PolicyEntry,,not-accessible,hpnicfWIPSSigPolicyNameCfg:hpnicfWIPSSigRule2PolicySigRuleIDCfg,current,,Each entry contains information of each signature rules attached to signature policy.
.1.3.6.1.4.1.11.2.14.11.15.2.118.1.10.2.1.1,HPN-ICF-WIPS-MIB::hpnicfWIPSSigRule2PolicySigRuleIDCfg,Unsigned32,not-accessible,,current,,Represents the ID of signature rule attached to signature policy.
.1.3.6.1.4.1.11.2.14.11.15.2.118.1.10.2.1.2,HPN-ICF-WIPS-MIB::hpnicfWIPSSigRule2PolicyRowStatus,INTEGER,read-create,,current,active(1):notInService(2):notReady(3):createAndGo(4):createAndWait(5):destroy(6),The status of this table entry.
.1.3.6.1.4.1.11.2.14.11.15.2.118.1.10.2.1.3,HPN-ICF-WIPS-MIB::hpnicfWIPSSigRule2PolicyPrecedence,Unsigned32,read-create,,current,,Represents the precedence of signature rule attached to signature policy.
.1.3.6.1.4.1.11.2.14.11.15.2.118.1.10.3,HPN-ICF-WIPS-MIB::hpnicfWIPSSigRuleTable,,not-accessible,,current,,The table defines the signature rules. 
.1.3.6.1.4.1.11.2.14.11.15.2.118.1.10.3.1,HPN-ICF-WIPS-MIB::hpnicfWIPSSigRuleEntry,,not-accessible,hpnicfWIPSSigRuleName,current,,Each entry contains information of each signature rules.
.1.3.6.1.4.1.11.2.14.11.15.2.118.1.10.3.1.1,HPN-ICF-WIPS-MIB::hpnicfWIPSSigRuleName,OCTET,not-accessible,,current,,Represents the name of signature rule.
.1.3.6.1.4.1.11.2.14.11.15.2.118.1.10.3.1.2,HPN-ICF-WIPS-MIB::hpnicfWIPSSigRuleID,Integer32,read-create,,current,,Represents the ID of signature rule. The values from 1 to 32 are for built-in rules, which can not be assigned to user-define rules. When a user-define signature rule is being created, if ID is not specified, the ID of the rule will be automatically assigned, which values from 33 to 64. Once the rule is created, the ID is fixed and can not be changed again.
.1.3.6.1.4.1.11.2.14.11.15.2.118.1.10.3.1.3,HPN-ICF-WIPS-MIB::hpnicfWIPSSigRuleRowStatus,INTEGER,read-create,,current,active(1):notInService(2):notReady(3):createAndGo(4):createAndWait(5):destroy(6),The status of this table entry.
.1.3.6.1.4.1.11.2.14.11.15.2.118.1.10.3.1.4,HPN-ICF-WIPS-MIB::hpnicfWIPSSigSubRuleMatchAll,INTEGER,read-create,,current,true(1):false(2),Represents whether match all the sub rules which have been configured in the signature rule. The default value for user-define rule is false, and for built-in rule is true.
.1.3.6.1.4.1.11.2.14.11.15.2.118.1.10.3.1.5,HPN-ICF-WIPS-MIB::hpnicfWIPSSigRuleDctPeriod,Unsigned32,read-create,,current,,Represents the detect period of signature rule. Available value limits from 1 to 3600. The default value depends on the certain rule. For user-define rules it is 60. The value 0xffffffff represents restoring default value operation.
.1.3.6.1.4.1.11.2.14.11.15.2.118.1.10.3.1.6,HPN-ICF-WIPS-MIB::hpnicfWIPSSigRuleTrackMethod,INTEGER,read-create,,current,perSig(1):perMAC(2):both(3),Represents the track-method for the signature rule. The default value depends on the certain rule. For user-define rules it is 'both(3)'.
.1.3.6.1.4.1.11.2.14.11.15.2.118.1.10.3.1.7,HPN-ICF-WIPS-MIB::hpnicfWIPSSigRuleDctThresholdPerMAC,Unsigned32,read-create,,current,,Represents the detect threshold for per-MAC track-method. Available value limits from 1 to 32000. The default value depends on the certain rule. For user-define rules it is 1000. The value 0xffffffff represents restoring default value operation.
.1.3.6.1.4.1.11.2.14.11.15.2.118.1.10.3.1.8,HPN-ICF-WIPS-MIB::hpnicfWIPSSigRuleDctThresholdPerSig,Unsigned32,read-create,,current,,Represents the detect threshold for per-Signature track-method. Available value limits from 1 to 32000. The default value depends on the certain rule. For user-define rules it is 1000. The value 0xffffffff represents restoring default value operation.
.1.3.6.1.4.1.11.2.14.11.15.2.118.1.10.3.1.9,HPN-ICF-WIPS-MIB::hpnicfWIPSSigRuleActionEvtLevel,Unsigned32,read-create,,current,,Represents the level of event sended for the action of reporting event alarm. Available value limits from 0 to 7. The default value depends on the certain rule. For user-define rules it is 0xffffffff.
.1.3.6.1.4.1.11.2.14.11.15.2.118.1.10.3.1.10,HPN-ICF-WIPS-MIB::hpnicfWIPSSigRuleQuietTime,Unsigned32,read-create,,current,,Represents the quiet time after reporting event alarm. Available value limits from 60 to 32000. The default value depends on the certain rule. For user-define rules it is 900. The value 0xffffffff represents restoring default value operation.
.1.3.6.1.4.1.11.2.14.11.15.2.118.1.10.3.1.11,HPN-ICF-WIPS-MIB::hpnicfWIPSSigSubRuleFrameType,INTEGER,read-create,,current,manage(0):control(1):data(2):undo(3),Represents the type of frame to match. 0x0 management type 0x1 control type 0x2 data type The default value depends on the certain rule. For user-define rules it is 'undo(3)'.
.1.3.6.1.4.1.11.2.14.11.15.2.118.1.10.3.1.12,HPN-ICF-WIPS-MIB::hpnicfWIPSSigSubRuleFrameSubType,INTEGER,read-create,,current,none(0):assocReq(1):assocRes(2):probeReq(3):beacon(4):disasso(5):auth(6):deauth(7),Represents the sub-type of frame to match. 1 association request 2 association response 3 probe request 4 beacon 5 disassoc 6 authentication 7 de-authentication The default value depends on the certain rule. For user-define rules it is 'none(0)'.
.1.3.6.1.4.1.11.2.14.11.15.2.118.1.10.3.1.13,HPN-ICF-WIPS-MIB::hpnicfWIPSSigSubRuleMac,OCTET,read-create,,current,,Represents the MAC address or BSSID to match.
.1.3.6.1.4.1.11.2.14.11.15.2.118.1.10.3.1.14,HPN-ICF-WIPS-MIB::hpnicfWIPSSigSubRuleMacType,INTEGER,read-create,,current,source(0):dest(1):bssid(2),Represents the type of MAC address or BSSID to match. 0 Source MAC address in the 802.11 frame header 1 Destination MAC address in the 802.11 frame header 2 BSSID field in the 802.11 frame header
.1.3.6.1.4.1.11.2.14.11.15.2.118.1.10.3.1.15,HPN-ICF-WIPS-MIB::hpnicfWIPSSigSubRuleSeqNumMin,Unsigned32,read-create,,current,,Represents the minimun value of sequence number of packet to match. Available value limits from 0 to 4094. The default value depends on the certain rule. For user-define rules it is 0xffffffff. The value 0xffffffff represents restoring default value operation.
.1.3.6.1.4.1.11.2.14.11.15.2.118.1.10.3.1.16,HPN-ICF-WIPS-MIB::hpnicfWIPSSigSubRuleSeqNumMax,Unsigned32,read-create,,current,,Represents the maximum value of sequence number of packet to match. Available value limits from 1 to 4095. The default value depends on the certain rule. For user-define rules it is 0xffffffff. The value 0xffffffff represents restoring default value operation.
.1.3.6.1.4.1.11.2.14.11.15.2.118.1.10.3.1.17,HPN-ICF-WIPS-MIB::hpnicfWIPSSigSubRuleSSIDLenMin,Unsigned32,read-create,,current,,Represents the minimun value of SSID of packet to match. Available value limits from 0 to 31. The default value depends on the certain rule. For user-define rules it is 0xffffffff. The value 0xffffffff represents restoring default value operation.
.1.3.6.1.4.1.11.2.14.11.15.2.118.1.10.3.1.18,HPN-ICF-WIPS-MIB::hpnicfWIPSSigSubRuleSSIDLenMax,Unsigned32,read-create,,current,,Represents the maximum value of SSID of packet to match. Available value limits from 1 to 32. The default value depends on the certain rule. For user-define rules it is 0xffffffff. The value 0xffffffff represents restoring default value operation.
.1.3.6.1.4.1.11.2.14.11.15.2.118.1.10.3.1.19,HPN-ICF-WIPS-MIB::hpnicfWIPSSigSubRuleSSID,OCTET,read-create,,current,,Represents the string of SSID of packet to match.
.1.3.6.1.4.1.11.2.14.11.15.2.118.1.10.3.1.20,HPN-ICF-WIPS-MIB::hpnicfWIPSSigSubRuleSSIDOpe,INTEGER,read-create,,current,include(1):notinclude(2):equal(3):notequal(4),Represents the compare way of the SSID in the sub rule, including include/not include/equal/not equal.
.1.3.6.1.4.1.11.2.14.11.15.2.118.1.10.3.1.21,HPN-ICF-WIPS-MIB::hpnicfWIPSSigSubRuleSSIDCase,INTEGER,read-create,,current,true(1):false(2),Represents the case sensitive or not for the SSID match. 'true': Case insensitive. 'false': Case sensitive.
.1.3.6.1.4.1.11.2.14.11.15.2.118.1.10.4,HPN-ICF-WIPS-MIB::hpnicfWIPSSigSubRulePatternTable,,not-accessible,,current,,The table defines the signature sub rules which define the user-define match way through pattern of packet. 
.1.3.6.1.4.1.11.2.14.11.15.2.118.1.10.4.1,HPN-ICF-WIPS-MIB::hpnicfWIPSSigSubRulePatternEntry,,not-accessible,hpnicfWIPSSigRuleName:hpnicfWIPSSigSubRulePatternID,current,,Each entry contains information of each pattern signature sub rules.
.1.3.6.1.4.1.11.2.14.11.15.2.118.1.10.4.1.1,HPN-ICF-WIPS-MIB::hpnicfWIPSSigSubRulePatternID,Unsigned32,not-accessible,,current,,Represents the ID of the pattern sub rule.
.1.3.6.1.4.1.11.2.14.11.15.2.118.1.10.4.1.2,HPN-ICF-WIPS-MIB::hpnicfWIPSSigSubRuleRowStatus,INTEGER,read-write,,current,active(1):notInService(2):notReady(3):createAndGo(4):createAndWait(5):destroy(6),The status of this table entry.
.1.3.6.1.4.1.11.2.14.11.15.2.118.1.10.4.1.3,HPN-ICF-WIPS-MIB::hpnicfWIPSSigSubRulePatternName,OCTET,read-write,,current,,Represents the name of the pattern sub rule.
.1.3.6.1.4.1.11.2.14.11.15.2.118.1.10.4.1.4,HPN-ICF-WIPS-MIB::hpnicfWIPSSigSubRulePatternOffset,Integer32,read-write,,current,,Represents the offset value of packet match.
.1.3.6.1.4.1.11.2.14.11.15.2.118.1.10.4.1.5,HPN-ICF-WIPS-MIB::hpnicfWIPSSigSubRulePatternMask,Integer32,read-write,,current,,Represents the mask value of packet match.
.1.3.6.1.4.1.11.2.14.11.15.2.118.1.10.4.1.6,HPN-ICF-WIPS-MIB::hpnicfWIPSSigSubRulePatternValueMin,Unsigned32,read-write,,current,,Represents the minimun value of match byte. Available value limits from 0 to 65534.
.1.3.6.1.4.1.11.2.14.11.15.2.118.1.10.4.1.7,HPN-ICF-WIPS-MIB::hpnicfWIPSSigSubRulePatternValueMax,Unsigned32,read-write,,current,,Represents the maximun value of match byte. Available value limits from 1 to 65535.
.1.3.6.1.4.1.11.2.14.11.15.2.118.1.10.4.1.8,HPN-ICF-WIPS-MIB::hpnicfWIPSSigSubRulePatternFromPayload,INTEGER,read-write,,current,true(1):false(2),Represents whether match start from the payload of the data frame.
.1.3.6.1.4.1.11.2.14.11.15.2.118.1.11,HPN-ICF-WIPS-MIB::hpnicfWIPSCtmConfigGroup,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.2.118.1.11.1,HPN-ICF-WIPS-MIB::hpnicfWIPSCtmPolicyCfgSupportSet,OCTET,read-only,,current,,Represents the bit string of supported countermeasure policy. The specific countermeasure policy is supported if its corresponding bit is set to 1; otherwise its corresponding bit is set to 0. bit3: misconfigured AP bit4: rogue AP bit5: unauthorized station bit6: external AP bit9: misassociation station bit10: potential authorized AP bit11: potential rogue AP bit12: potential external AP bit13: uncategorized AP bit14: uncategorized station 
.1.3.6.1.4.1.11.2.14.11.15.2.118.1.11.2,HPN-ICF-WIPS-MIB::hpnicfWIPSCtmPolicyTable,,not-accessible,,current,,The table defines the parameters for WIPS countermeasure policy. One policy could be assigned to different VSDs. 
.1.3.6.1.4.1.11.2.14.11.15.2.118.1.11.2.1,HPN-ICF-WIPS-MIB::hpnicfWIPSCtmPolicyEntry,,not-accessible,hpnicfWIPSCtmPolicyName,current,,Each entry contains information of each countermeasure policy.
.1.3.6.1.4.1.11.2.14.11.15.2.118.1.11.2.1.1,HPN-ICF-WIPS-MIB::hpnicfWIPSCtmPolicyName,OCTET,not-accessible,,current,,Represents the name of countermeasure policy.
.1.3.6.1.4.1.11.2.14.11.15.2.118.1.11.2.1.2,HPN-ICF-WIPS-MIB::hpnicfWIPSCtmPolicyCfgRowStatus,INTEGER,read-create,,current,active(1):notInService(2):notReady(3):createAndGo(4):createAndWait(5):destroy(6),The status of this table entry.
.1.3.6.1.4.1.11.2.14.11.15.2.118.1.11.2.1.3,HPN-ICF-WIPS-MIB::hpnicfWIPSCtmPolicyBitString,OCTET,read-create,,current,,Represents the bit string of countermeasure policy configuration. The specific countermeasure of device is enabled if its corresponding bit is set to 1; disabled if its corresponding bit is set to 0. bit3: misconfigured AP bit4: rogue AP bit5: unauthorized station bit6: external AP bit9: misassociation station bit10: potential authorized AP bit11: potential rogue AP bit12: potential external AP bit13: uncategorized AP bit14: uncategorized station
.1.3.6.1.4.1.11.2.14.11.15.2.118.1.11.2.1.4,HPN-ICF-WIPS-MIB::hpnicfWIPSCtmPolicyFixedChl,INTEGER,read-create,,current,true(1):false(2),Represents whether enable fixed channel scan function.
.1.3.6.1.4.1.11.2.14.11.15.2.118.1.11.2.1.5,HPN-ICF-WIPS-MIB::hpnicfWIPSCtmPolicyRogueAPPre,Unsigned32,read-create,,current,,Represents the precedence of countermeasure for rogue AP. Available value limits from 0 to 9. Value 0xffffffff represents undo operation.
.1.3.6.1.4.1.11.2.14.11.15.2.118.1.11.2.1.6,HPN-ICF-WIPS-MIB::hpnicfWIPSCtmPolicyPtRogueAPPre,Unsigned32,read-create,,current,,Represents the precedence of countermeasure for potential rogue AP. Available value limits from 0 to 9. Value 0xffffffff represents undo operation.
.1.3.6.1.4.1.11.2.14.11.15.2.118.1.11.2.1.7,HPN-ICF-WIPS-MIB::hpnicfWIPSCtmPolicyMisconfAPPre,Unsigned32,read-create,,current,,Represents the precedence of countermeasure for misconfigured AP. Available value limits from 0 to 9. Value 0xffffffff represents undo operation.
.1.3.6.1.4.1.11.2.14.11.15.2.118.1.11.2.1.8,HPN-ICF-WIPS-MIB::hpnicfWIPSCtmPolicyExternalAPPre,Unsigned32,read-create,,current,,Represents the precedence of countermeasure for external AP. Available value limits from 0 to 9. Value 0xffffffff represents undo operation.
.1.3.6.1.4.1.11.2.14.11.15.2.118.1.11.2.1.9,HPN-ICF-WIPS-MIB::hpnicfWIPSCtmPolicyPtExternalAPPre,Unsigned32,read-create,,current,,Represents the precedence of countermeasure for potential external AP. Available value limits from 0 to 9. Value 0xffffffff represents undo operation.
.1.3.6.1.4.1.11.2.14.11.15.2.118.1.11.2.1.10,HPN-ICF-WIPS-MIB::hpnicfWIPSCtmPolicyUncateAPPre,Unsigned32,read-create,,current,,Represents the precedence of countermeasure for uncategorized AP. Available value limits from 0 to 9. Value 0xffffffff represents undo operation.
.1.3.6.1.4.1.11.2.14.11.15.2.118.1.11.2.1.11,HPN-ICF-WIPS-MIB::hpnicfWIPSCtmPolicyPtAuthAPPre,Unsigned32,read-create,,current,,Represents the precedence of countermeasure for potential authorized AP. Available value limits from 0 to 9. Value 0xffffffff represents undo operation.
.1.3.6.1.4.1.11.2.14.11.15.2.118.1.11.2.1.12,HPN-ICF-WIPS-MIB::hpnicfWIPSCtmPolicyMisassoStaPre,Unsigned32,read-create,,current,,Represents the precedence of countermeasure for misassociated station. Available value limits from 0 to 9. Value 0xffffffff represents undo operation.
.1.3.6.1.4.1.11.2.14.11.15.2.118.1.11.2.1.13,HPN-ICF-WIPS-MIB::hpnicfWIPSCtmPolicyUncateStaPre,Unsigned32,read-create,,current,,Represents the precedence of countermeasure for uncategorized station. Available value limits from 0 to 9. Value 0xffffffff represents undo operation.
.1.3.6.1.4.1.11.2.14.11.15.2.118.1.11.2.1.14,HPN-ICF-WIPS-MIB::hpnicfWIPSCtmPolicyUnauthStaPre,Unsigned32,read-create,,current,,Represents the precedence of countermeasure for unauthorized station. Available value limits from 0 to 9. Value 0xffffffff represents undo operation.
.1.3.6.1.4.1.11.2.14.11.15.2.118.1.11.3,HPN-ICF-WIPS-MIB::hpnicfWIPSCtmPolicyDevListTable,,not-accessible,,current,,The table defines the MAC address list of countermeasure device in WIPS countermeasure policy. 
.1.3.6.1.4.1.11.2.14.11.15.2.118.1.11.3.1,HPN-ICF-WIPS-MIB::hpnicfWIPSCtmPolicyDevListEntry,,not-accessible,hpnicfWIPSCtmPolicyName:hpnicfWIPSCtmPolicyDevMAC,current,,Each entry contains information of each MAC address of device.
.1.3.6.1.4.1.11.2.14.11.15.2.118.1.11.3.1.1,HPN-ICF-WIPS-MIB::hpnicfWIPSCtmPolicyDevMAC,OCTET,not-accessible,,current,,Represents the MAC address of countermeasure device.
.1.3.6.1.4.1.11.2.14.11.15.2.118.1.11.3.1.2,HPN-ICF-WIPS-MIB::hpnicfWIPSCtmPolicyDevRowStatus,INTEGER,read-create,,current,active(1):notInService(2):notReady(3):createAndGo(4):createAndWait(5):destroy(6),The status of this table entry.
.1.3.6.1.4.1.11.2.14.11.15.2.118.1.12,HPN-ICF-WIPS-MIB::hpnicfWIPSMalPktDctConfigGroup,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.2.118.1.12.1,HPN-ICF-WIPS-MIB::hpnicfWIPSMalPktDctCfgLogSupportSet,OCTET,read-only,,current,,Represents the bit string of supported malformed packet detect policy controlling the log function. The specific malformed packet detect policy is supported if its corresponding bit is set to 1; otherwise its corresponding bit is set to 0. bit0: invalid IE length bit1: duplicated IE bit2: redundant IE bit3: invalid packet length bit4: illegal IBSS and ESS bit5: invalid source address bit6: overflow EAPOL key length bit7: malformed authetication bit8: malformed association request bit9: malformed HT-IE bit10: large duration bit11: null probe response bit12: invalid deauthentication reason code bit13: invalid disassociation reason code bit14: overflow SSID length bit15: fata-jack
.1.3.6.1.4.1.11.2.14.11.15.2.118.1.12.2,HPN-ICF-WIPS-MIB::hpnicfWIPSMalPktDctCfgTrapSupportSet,OCTET,read-only,,current,,Represents the bit string of supported malformed packet detect policy controlling the trap function. The specific malformed packet detect policy is supported if its corresponding bit is set to 1; otherwise its corresponding bit is set to 0. bit0: invalid IE length bit1: duplicated IE bit2: redundant IE bit3: invalid packet length bit4: illegal IBSS and ESS bit5: invalid source address bit6: overflow EAPOL key length bit7: malformed authetication bit8: malformed association request bit9: malformed HT-IE bit10: large duration bit11: null probe response bit12: invalid deauthentication reason code bit13: invalid disassociation reason code bit14: overflow SSID length bit15: fata-jack
.1.3.6.1.4.1.11.2.14.11.15.2.118.1.12.3,HPN-ICF-WIPS-MIB::hpnicfWIPSMalPktDctPolicyTable,,not-accessible,,current,,Represents.
.1.3.6.1.4.1.11.2.14.11.15.2.118.1.12.3.1,HPN-ICF-WIPS-MIB::hpnicfWIPSMalPktDctPolicyEntry,,not-accessible,hpnicfWIPSMalPktDctPolicyName,current,,Represents.
.1.3.6.1.4.1.11.2.14.11.15.2.118.1.12.3.1.1,HPN-ICF-WIPS-MIB::hpnicfWIPSMalPktDctPolicyName,OCTET,not-accessible,,current,,Represents the name of malformed packet detect policy.
.1.3.6.1.4.1.11.2.14.11.15.2.118.1.12.3.1.2,HPN-ICF-WIPS-MIB::hpnicfWIPSMalPktDctPolicyCfgRowStatus,INTEGER,read-create,,current,active(1):notInService(2):notReady(3):createAndGo(4):createAndWait(5):destroy(6),The status of this table entry.
.1.3.6.1.4.1.11.2.14.11.15.2.118.1.12.3.1.3,HPN-ICF-WIPS-MIB::hpnicfWIPSMalPktDctPolicyLogBitString,OCTET,read-create,,current,,Represents the bit string of malformed packet detect policy controlling the log function configuration. The specific malformed packet detect is enbled if its corresponding bit is set to 1; disabled its corresponding bit is set to 0. bit0: invalid IE length bit1: duplicated IE bit2: redundant IE bit3: invalid packet length bit4: illegal IBSS and ESS bit5: invalid source address bit6: overflow EAPOL key length bit7: malformed authetication bit8: malformed association request bit9: malformed HT-IE bit10: large duration bit11: null probe response bit12: invalid deauthentication reason code bit13: invalid disassociation reason code bit14: overflow SSID length bit15: fata-jack
.1.3.6.1.4.1.11.2.14.11.15.2.118.1.12.3.1.4,HPN-ICF-WIPS-MIB::hpnicfWIPSMalPktDctPolicyTrapBitString,OCTET,read-create,,current,,Represents the bit string of malformed packet detect policy controlling the trap function configuration. The specific malformed packet detect is enbled if its corresponding bit is set to 1; disabled its corresponding bit is set to 0. bit0: invalid IE length bit1: duplicated IE bit2: redundant IE bit3: invalid packet length bit4: illegal IBSS and ESS bit5: invalid source address bit6: overflow EAPOL key length bit7: malformed authetication bit8: malformed association request bit9: malformed HT-IE bit10: large duration bit11: null probe response bit12: invalid deauthentication reason code bit13: invalid disassociation reason code bit14: overflow SSID length bit15: fata-jack
.1.3.6.1.4.1.11.2.14.11.15.2.118.1.12.3.1.5,HPN-ICF-WIPS-MIB::hpnicfWIPSMalPktDctPolicyDurationThreshold,Integer32,read-create,,current,,Represents the threshold of duration for large duration malformed packet detection.
.1.3.6.1.4.1.11.2.14.11.15.2.118.1.12.3.1.6,HPN-ICF-WIPS-MIB::hpnicfWIPSMalPktDctPolicyQuietTime,Integer32,read-create,,current,,Represents the quiet time after reporting event alarm.
.1.3.6.1.4.1.11.2.14.11.15.2.118.1.13,HPN-ICF-WIPS-MIB::hpnicfWIPSStaticTrustOUIListCfgTable,,not-accessible,,current,,The table provides the OUI list of devices in the static trust list. WIPS will take the devices in the list as authorized devices.
.1.3.6.1.4.1.11.2.14.11.15.2.118.1.13.1,HPN-ICF-WIPS-MIB::hpnicfWIPSStaticTrustOUIListCfgEntry,,not-accessible,hpnicfWIPSStaticTrustOUIListOUI,current,,Each entry contains information of each OUI in the static trust list. 
.1.3.6.1.4.1.11.2.14.11.15.2.118.1.13.1.1,HPN-ICF-WIPS-MIB::hpnicfWIPSStaticTrustOUIListOUI,OCTET,not-accessible,,current,,Represents the OUI in static trust list.
.1.3.6.1.4.1.11.2.14.11.15.2.118.1.13.1.2,HPN-ICF-WIPS-MIB::hpnicfWIPSStaticTrustOUIListRowStatus,INTEGER,read-create,,current,active(1):notInService(2):notReady(3):createAndGo(4):createAndWait(5):destroy(6),The status of this table entry.
.1.3.6.1.4.1.11.2.14.11.15.2.118.1.14,HPN-ICF-WIPS-MIB::hpnicfWIPSStaticTrustVendorListCfgTable,,not-accessible,,current,,The table provides the vendor list of devices in the static trust list. WIPS will take the devices in the list as authorized devices.
.1.3.6.1.4.1.11.2.14.11.15.2.118.1.14.1,HPN-ICF-WIPS-MIB::hpnicfWIPSStaticTrustVendorListCfgEntry,,not-accessible,hpnicfWIPSStaticTrustVendorListVendor,current,,Each entry contains information of each vendor in the static trust list. 
.1.3.6.1.4.1.11.2.14.11.15.2.118.1.14.1.1,HPN-ICF-WIPS-MIB::hpnicfWIPSStaticTrustVendorListVendor,OCTET,not-accessible,,current,,Represents the vendor in static trust list.
.1.3.6.1.4.1.11.2.14.11.15.2.118.1.14.1.2,HPN-ICF-WIPS-MIB::hpnicfWIPSStaticTrustVendorListRowStatus,INTEGER,read-create,,current,active(1):notInService(2):notReady(3):createAndGo(4):createAndWait(5):destroy(6),The status of this table entry.
.1.3.6.1.4.1.11.2.14.11.15.2.118.2,HPN-ICF-WIPS-MIB::hpnicfWIPSDetectGroup,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.2.118.2.1,HPN-ICF-WIPS-MIB::hpnicfWIPSDctAPTable,,not-accessible,,current,,The table represents the list of possible BSS information for APs detected by the WIPS.
.1.3.6.1.4.1.11.2.14.11.15.2.118.2.1.1,HPN-ICF-WIPS-MIB::hpnicfWIPSDctAPEntry,,not-accessible,hpnicfWIPSDctAPVSD:hpnicfWIPSDctAPBSSID,current,,Each entry contains possible BSS information of each AP detected by WIPS.
.1.3.6.1.4.1.11.2.14.11.15.2.118.2.1.1.1,HPN-ICF-WIPS-MIB::hpnicfWIPSDctAPVSD,OCTET,not-accessible,,current,,Represents the virtual security domain where the BSS was detected.
.1.3.6.1.4.1.11.2.14.11.15.2.118.2.1.1.2,HPN-ICF-WIPS-MIB::hpnicfWIPSDctAPBSSID,OCTET,not-accessible,,current,,Represents the Basic Service Set.
.1.3.6.1.4.1.11.2.14.11.15.2.118.2.1.1.3,HPN-ICF-WIPS-MIB::hpnicfWIPSDctAPRunningTime,TimeTicks,read-only,,current,,Represents the time since AP started to work, which is got from beacon/probe response frame.
.1.3.6.1.4.1.11.2.14.11.15.2.118.2.1.1.4,HPN-ICF-WIPS-MIB::hpnicfWIPSDctAPRunTmLastUpdateTm,TimeTicks,read-only,,current,,Represents the time update hpnicfWIPSDctAPRunningTime since system is up.
.1.3.6.1.4.1.11.2.14.11.15.2.118.2.1.1.5,HPN-ICF-WIPS-MIB::hpnicfWIPSDctAPIsCountered,INTEGER,read-only,,current,true(1):false(2),Represents whether the detected AP is countered by WIPS.
.1.3.6.1.4.1.11.2.14.11.15.2.118.2.1.1.6,HPN-ICF-WIPS-MIB::hpnicfWIPSDctAPWorkChannel,Integer32,read-only,,current,,Represents the radio channel which the detected AP work on.
.1.3.6.1.4.1.11.2.14.11.15.2.118.2.1.1.7,HPN-ICF-WIPS-MIB::hpnicfWIPSDctAPRadioType,INTEGER,read-only,,current,dot11a(1):dot11b(2):dot11g(4):dot11n(8):dot11gn(16):dot11an(32),Represents the radio type used by the detected AP.
.1.3.6.1.4.1.11.2.14.11.15.2.118.2.1.1.8,HPN-ICF-WIPS-MIB::hpnicfWIPSDctAPAuthMethod,INTEGER,read-only,,current,none(1):psk(2):dot1x(3):other(4),Represents the authentication method used by the detected AP. none(1) - No key management mode configured, psk(2) - pre-shared key authentication, dot1x(3) - 802.1x authentication. other(4) - other authentication.
.1.3.6.1.4.1.11.2.14.11.15.2.118.2.1.1.9,HPN-ICF-WIPS-MIB::hpnicfWIPSDctAPEncryptMethod,Unsigned32,read-only,,current,,Represents the encrypt method used by the detected AP. none(1) - clear text or no cipher method is configure, wep(2) - WEP key, tkip(4) - WPA Temporal Key encryption, ccmp(8) - WPA AES CCMP encryption
.1.3.6.1.4.1.11.2.14.11.15.2.118.2.1.1.10,HPN-ICF-WIPS-MIB::hpnicfWIPSDctAPSecurity,Unsigned32,read-only,,current,,Represents the security suites of the detected AP. clear 0x01 wpa2 0x02 wpa 0x04 wep 0x08
.1.3.6.1.4.1.11.2.14.11.15.2.118.2.1.1.11,HPN-ICF-WIPS-MIB::hpnicfWIPSDctAPSeverityLevel,Unsigned32,read-only,,current,,Represents the severity level of the detected AP.
.1.3.6.1.4.1.11.2.14.11.15.2.118.2.1.1.12,HPN-ICF-WIPS-MIB::hpnicfWIPSDctAPLastDctTm,TimeTicks,read-only,,current,,Represents the time that AP was detected for the last time since system is up.
.1.3.6.1.4.1.11.2.14.11.15.2.118.2.1.1.13,HPN-ICF-WIPS-MIB::hpnicfWIPSDctAPFirstDctTm,TimeTicks,read-only,,current,,Represents the time that AP was detected for the first time since system is up.
.1.3.6.1.4.1.11.2.14.11.15.2.118.2.1.1.14,HPN-ICF-WIPS-MIB::hpnicfWIPSDctAPAdd2BlackList,INTEGER,read-write,,current,true(1):false(2),Represents whether the AP will be taken as a rogue AP. If the value is true, the MAC address will be automatically added into hpnicfWIPSBlockListTable and the category of the AP will be taken as rogue. If the value is false, the MAC address will be automatically deleted from hpnicfWIPSBlockListTable.
.1.3.6.1.4.1.11.2.14.11.15.2.118.2.1.1.15,HPN-ICF-WIPS-MIB::hpnicfWIPSDctAPAdd2WhiteList,INTEGER,read-write,,current,true(1):false(2),Represents whether the AP will be taken as an authorized AP. If the value is true, the MAC address will be automatically added into hpnicfWIPSTrustListTable. If the value is false, the MAC address will be automatically deleted from hpnicfWIPSTrustListTable
.1.3.6.1.4.1.11.2.14.11.15.2.118.2.1.1.16,HPN-ICF-WIPS-MIB::hpnicfWIPSDctAPAdd2IgnoreList,INTEGER,read-write,,current,true(1):false(2),Represents whether the AP will be taken as an ignored AP. If the value is true, the MAC address will be automatically added into hpnicfWIPSIgnoreListTable. If the value is false, the MAC address will be automatically deleted from hpnicfWIPSIgnoreListTable
.1.3.6.1.4.1.11.2.14.11.15.2.118.2.1.1.17,HPN-ICF-WIPS-MIB::hpnicfWIPSDctAPAdd2CtmList,INTEGER,read-write,,current,true(1):false(2),Represents whether the AP will be taken as a countered AP. If the value is true, the MAC address will be automatically added into hpnicfWIPSCountermeasureListTable. If the value is false, the MAC address will be automatically deleted from hpnicfWIPSCountermeasureListTable.
.1.3.6.1.4.1.11.2.14.11.15.2.118.2.1.1.18,HPN-ICF-WIPS-MIB::hpnicfWIPSDctAPCategory,INTEGER,read-write,,current,adhoc(1):authorized(2):rogue(3):misconfigured(4):external(5):potentialAuthorized(6):potentialRogue(7):potentialExternal(8):uncategorized(9),Represents the categorized result of the AP. For set operation, only the following values are valid: authorized(2),rogue(3),misconfigured(4),external(5)
.1.3.6.1.4.1.11.2.14.11.15.2.118.2.1.1.19,HPN-ICF-WIPS-MIB::hpnicfWIPSDctAPCategoryWay,INTEGER,read-write,,current,manual(1):autoByNMS(2):autoByDev(3),Represents by which way the AP is categorized. manual(1) -categorized by user autoByNMS(2) -categorized by NMS(Network Management System) autoByDev(3) -categorized by WIPS
.1.3.6.1.4.1.11.2.14.11.15.2.118.2.1.1.20,HPN-ICF-WIPS-MIB::hpnicfWIPSDctAPStatus,INTEGER,read-only,,current,active(1):inactive(2),Represents the status of the AP detected by WIPS.
.1.3.6.1.4.1.11.2.14.11.15.2.118.2.1.1.21,HPN-ICF-WIPS-MIB::hpnicfWIPSDctAPSSID,OCTET,read-only,,current,,Represents the SSID broadcasted by AP.
.1.3.6.1.4.1.11.2.14.11.15.2.118.2.1.1.22,HPN-ICF-WIPS-MIB::hpnicfWIPSDctAPAttachStaNum,Integer32,read-only,,current,,Represents the number of clients associated with the detected AP.
.1.3.6.1.4.1.11.2.14.11.15.2.118.2.1.1.23,HPN-ICF-WIPS-MIB::hpnicfWIPSDctAPRptSensorNum,Integer32,read-only,,current,,Represents the number of sensors detecting the AP.
.1.3.6.1.4.1.11.2.14.11.15.2.118.2.1.1.24,HPN-ICF-WIPS-MIB::hpnicfWIPSDctAPVendor,OCTET,read-only,,current,,Represents the vendor of this AP detected by WIPS.
.1.3.6.1.4.1.11.2.14.11.15.2.118.2.2,HPN-ICF-WIPS-MIB::hpnicfWIPSDctAPAttachStaTable,,not-accessible,,current,,The table represents the list of station associated with APs detected by the WIPS.
.1.3.6.1.4.1.11.2.14.11.15.2.118.2.2.1,HPN-ICF-WIPS-MIB::hpnicfWIPSDctAPAttachStaEntry,,not-accessible,hpnicfWIPSDctAPVSD:hpnicfWIPSDctAPBSSID:hpnicfWIPSDctAPAttachStaMac,current,,Each entry contains possible station information detected by WIPS.
.1.3.6.1.4.1.11.2.14.11.15.2.118.2.2.1.1,HPN-ICF-WIPS-MIB::hpnicfWIPSDctAPAttachStaMac,OCTET,not-accessible,,current,,Represents the MAC address of station associated with AP.
.1.3.6.1.4.1.11.2.14.11.15.2.118.2.2.1.2,HPN-ICF-WIPS-MIB::hpnicfWIPSDctAPAttachStaRowStatus,INTEGER,read-only,,current,active(1):notInService(2):notReady(3):createAndGo(4):createAndWait(5):destroy(6),The status of this table entry. It is read-only and will return 'Not writable' for set operation.
.1.3.6.1.4.1.11.2.14.11.15.2.118.2.3,HPN-ICF-WIPS-MIB::hpnicfWIPSDctAPRptSensorTable,,not-accessible,,current,,The table represents the list of sensors.
.1.3.6.1.4.1.11.2.14.11.15.2.118.2.3.1,HPN-ICF-WIPS-MIB::hpnicfWIPSDctAPRptSensorEntry,,not-accessible,hpnicfWIPSDctAPVSD:hpnicfWIPSDctAPBSSID:hpnicfWIPSDctAPRptSensorName,current,,Each entry contains possible sensor information of WIPS.
.1.3.6.1.4.1.11.2.14.11.15.2.118.2.3.1.1,HPN-ICF-WIPS-MIB::hpnicfWIPSDctAPRptSensorName,OCTET,not-accessible,,current,,Represents the name of sensor.
.1.3.6.1.4.1.11.2.14.11.15.2.118.2.3.1.2,HPN-ICF-WIPS-MIB::hpnicfWIPSDctAPRptSensorRadioId,Integer32,read-only,,current,,Represents on which radio the sensor AP detected the AP.
.1.3.6.1.4.1.11.2.14.11.15.2.118.2.3.1.3,HPN-ICF-WIPS-MIB::hpnicfWIPSDctAPRptRSSI,Integer32,read-only,,current,,Represents the current value of signal strength that WIPS sensor AP received from the AP.
.1.3.6.1.4.1.11.2.14.11.15.2.118.2.3.1.4,HPN-ICF-WIPS-MIB::hpnicfWIPSDctAPLastRptTm,TimeTicks,read-only,,current,,Represents the time that AP was detected by this sensor for the last time since system is up.
.1.3.6.1.4.1.11.2.14.11.15.2.118.2.4,HPN-ICF-WIPS-MIB::hpnicfWIPSDctStaTable,,not-accessible,,current,,The table represents the list of possible information for stations detected by the WIPS.
.1.3.6.1.4.1.11.2.14.11.15.2.118.2.4.1,HPN-ICF-WIPS-MIB::hpnicfWIPSDctStaEntry,,not-accessible,hpnicfWIPSDctStaVSD:hpnicfWIPSDctStaMac,current,,Each entry contains possible station information of each station detected by WIPS.
.1.3.6.1.4.1.11.2.14.11.15.2.118.2.4.1.1,HPN-ICF-WIPS-MIB::hpnicfWIPSDctStaVSD,OCTET,not-accessible,,current,,Represents the virtual security domain in which the station was detected.
.1.3.6.1.4.1.11.2.14.11.15.2.118.2.4.1.2,HPN-ICF-WIPS-MIB::hpnicfWIPSDctStaMac,OCTET,not-accessible,,current,,Represents the MAC address of station.
.1.3.6.1.4.1.11.2.14.11.15.2.118.2.4.1.3,HPN-ICF-WIPS-MIB::hpnicfWIPSDctStaAssocBSSID,OCTET,read-only,,current,,Represents the BSSID which station associates with.
.1.3.6.1.4.1.11.2.14.11.15.2.118.2.4.1.4,HPN-ICF-WIPS-MIB::hpnicfWIPSDctStaStatus,INTEGER,read-only,,current,active(1):inactive(2),Represents the status of this station detected by WIPS.
.1.3.6.1.4.1.11.2.14.11.15.2.118.2.4.1.5,HPN-ICF-WIPS-MIB::hpnicfWIPSDctStaCategory,INTEGER,read-only,,current,authorized(1):unauthorized(2):misassociated(3):uncategorized(4),Represents the categorized result of the station.
.1.3.6.1.4.1.11.2.14.11.15.2.118.2.4.1.6,HPN-ICF-WIPS-MIB::hpnicfWIPSDctStaRadioType,INTEGER,read-only,,current,dot11a(1):dot11b(2):dot11g(4):dot11n(8):dot11gn(16):dot11an(32),Represents the radio type used by the detected station.
.1.3.6.1.4.1.11.2.14.11.15.2.118.2.4.1.7,HPN-ICF-WIPS-MIB::hpnicfWIPSDctStaWorkChannel,Integer32,read-only,,current,,Represents on which radio channel that WIPS sensor AP detected the station.
.1.3.6.1.4.1.11.2.14.11.15.2.118.2.4.1.8,HPN-ICF-WIPS-MIB::hpnicfWIPSDctStaIsCountered,INTEGER,read-only,,current,true(1):false(2),Represents whether the detected station is countered by WIPS.
.1.3.6.1.4.1.11.2.14.11.15.2.118.2.4.1.9,HPN-ICF-WIPS-MIB::hpnicfWIPSDctStaAdd2BlackList,INTEGER,read-write,,current,true(1):false(2),Represents whether the station will be taken as a rogue station. If the value is true, the MAC address will be automatically added into hpnicfWIPSBlockListTable and the category of the station will be taken as rogue. If the value is false, the MAC address will be automatically deleted from hpnicfWIPSBlockListTable.
.1.3.6.1.4.1.11.2.14.11.15.2.118.2.4.1.10,HPN-ICF-WIPS-MIB::hpnicfWIPSDctStaAdd2WhiteList,INTEGER,read-write,,current,true(1):false(2),Represents whether the station will be taken as an authorized station. If the value is true, the MAC address will be automatically added into hpnicfWIPSTrustListTable. If the value is false, the MAC address will be automatically deleted from hpnicfWIPSTrustListTable.
.1.3.6.1.4.1.11.2.14.11.15.2.118.2.4.1.11,HPN-ICF-WIPS-MIB::hpnicfWIPSDctStaAdd2IgnoreList,INTEGER,read-write,,current,true(1):false(2),Represents whether the station will be taken as an ignored station. If the value is true, the MAC address will be automatically added into hpnicfWIPSIgnoreListTable. If the value is false, the MAC address will be automatically deleted from hpnicfWIPSIgnoreListTable.
.1.3.6.1.4.1.11.2.14.11.15.2.118.2.4.1.12,HPN-ICF-WIPS-MIB::hpnicfWIPSDctStaAdd2CtmList,INTEGER,read-write,,current,true(1):false(2),Represents whether the station will be taken as a countered station. If the value is true, the MAC address will be automatically added into hpnicfWIPSCountermeasureListTable. If the value is false, the MAC address will be automatically deleted from hpnicfWIPSCountermeasureListTable.
.1.3.6.1.4.1.11.2.14.11.15.2.118.2.4.1.13,HPN-ICF-WIPS-MIB::hpnicfWIPSDctStaFirstDctTm,TimeTicks,read-only,,current,,Represents the time that station was detected for the first time since system is up.
.1.3.6.1.4.1.11.2.14.11.15.2.118.2.4.1.14,HPN-ICF-WIPS-MIB::hpnicfWIPSDctStaLastDctTm,TimeTicks,read-only,,current,,Represents the time that station was detected for the last time since system is up.
.1.3.6.1.4.1.11.2.14.11.15.2.118.2.4.1.15,HPN-ICF-WIPS-MIB::hpnicfWIPSDctStaRptSensorNum,Integer32,read-only,,current,,Represents the number of sensors detecting the station.
.1.3.6.1.4.1.11.2.14.11.15.2.118.2.4.1.16,HPN-ICF-WIPS-MIB::hpnicfWIPSDctStaState,INTEGER,read-only,,current,authentication(1):association(2):eapSuccess(3):eapLogoff(4):disassociation(5):deauthentication(6),Represents the authentication state of station with AP.
.1.3.6.1.4.1.11.2.14.11.15.2.118.2.4.1.17,HPN-ICF-WIPS-MIB::hpnicfWIPSDctStaVendor,OCTET,read-only,,current,,Represents the vendor of this station detected by WIPS.
.1.3.6.1.4.1.11.2.14.11.15.2.118.2.5,HPN-ICF-WIPS-MIB::hpnicfWIPSDctStaRptSensorTable,,not-accessible,,current,,The table represents the list of sensors detecting the station.
.1.3.6.1.4.1.11.2.14.11.15.2.118.2.5.1,HPN-ICF-WIPS-MIB::hpnicfWIPSDctStaRptSensorEntry,,not-accessible,hpnicfWIPSDctStaVSD:hpnicfWIPSDctStaMac:hpnicfWIPSDctStaRtpSensorName,current,,Each entry contains possible sensor information of WIPS.
.1.3.6.1.4.1.11.2.14.11.15.2.118.2.5.1.1,HPN-ICF-WIPS-MIB::hpnicfWIPSDctStaRtpSensorName,OCTET,not-accessible,,current,,Represents the name of sensor.
.1.3.6.1.4.1.11.2.14.11.15.2.118.2.5.1.2,HPN-ICF-WIPS-MIB::hpnicfWIPSDctStaRptSensorRadioId,Integer32,read-only,,current,,Represents on which radio the sensor AP detected the station.
.1.3.6.1.4.1.11.2.14.11.15.2.118.2.5.1.3,HPN-ICF-WIPS-MIB::hpnicfWIPSDctStaRptRSSI,Integer32,read-only,,current,,Represents the current value of signal strength that WIPS sensor AP received from the station.
.1.3.6.1.4.1.11.2.14.11.15.2.118.2.5.1.4,HPN-ICF-WIPS-MIB::hpnicfWIPSDctStaLastRptTm,TimeTicks,read-only,,current,,Represents the time that station was detected by this sensor for the last time since system is up.
.1.3.6.1.4.1.11.2.14.11.15.2.118.2.6,HPN-ICF-WIPS-MIB::hpnicfWIPSDctSSIDTable,,not-accessible,,current,,The table represents the list of possible ESS information for networks detected by WIPS.
.1.3.6.1.4.1.11.2.14.11.15.2.118.2.6.1,HPN-ICF-WIPS-MIB::hpnicfWIPSDctSSIDEntry,,not-accessible,hpnicfWIPSDctNetworkVSD:hpnicfWIPSDctNetworkSSID:hpnicfWIPSDctNetworkCfg,current,,Each entry contains possible ESS information of each ESS detected by WIPS.
.1.3.6.1.4.1.11.2.14.11.15.2.118.2.6.1.1,HPN-ICF-WIPS-MIB::hpnicfWIPSDctNetworkVSD,OCTET,not-accessible,,current,,Represents the virtual security domain in which the ESS was detected.
.1.3.6.1.4.1.11.2.14.11.15.2.118.2.6.1.2,HPN-ICF-WIPS-MIB::hpnicfWIPSDctNetworkSSID,OCTET,not-accessible,,current,,Represents the service set identifier for the ESS. Using the ASCII value '1' represents that the SSID is not advertised in the beacon frames.
.1.3.6.1.4.1.11.2.14.11.15.2.118.2.6.1.3,HPN-ICF-WIPS-MIB::hpnicfWIPSDctNetworkCfg,Unsigned32,not-accessible,,current,,Represents the encrypt method, security suite and authentication method which are used by the detected ESS. The lowest 8 bits mean encrypt method. The higher 8 bits mean security suite. The third 8 bits stand for authentication method. The higerest 8 bits are reserved. The meaning is shown as follows: 31 23 15 7 0 + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + | reserved | auth method | security suite|encryptmethod| + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + For encrypt method, the following values are supported: 1: none - clear text or no cipher method is configure, 2: wep - WEP key, 4: tkip - WPA Temporal Key encryption, 8: ccmp - WPA AES CCMP encryption For security suite, the following values are supported: 0x01: clear 0x02: wpa2 0x04: wpa 0x08: wep For authentication method, the following values are supported: 1: none - No key management mode configured, 2: psk - pre-shared key authentication, 3: dot1x - 802.1x authentication. 4: other - other authentication
.1.3.6.1.4.1.11.2.14.11.15.2.118.2.6.1.4,HPN-ICF-WIPS-MIB::hpnicfWIPSDctNetworkFirstRptTm,TimeTicks,read-only,,current,,Represents the time that ESS was detected for the first time since system is up.
.1.3.6.1.4.1.11.2.14.11.15.2.118.2.6.1.5,HPN-ICF-WIPS-MIB::hpnicfWIPSDctNetworkLastRptTm,TimeTicks,read-only,,current,,Represents the time that ESS was detected for the last time since system is up.
.1.3.6.1.4.1.11.2.14.11.15.2.118.2.6.1.6,HPN-ICF-WIPS-MIB::hpnicfWIPSDctNetworkStatus,INTEGER,read-only,,current,active(1):inactive(2),Represents the status of this ESS detected by WIPS.
.1.3.6.1.4.1.11.2.14.11.15.2.118.2.6.1.7,HPN-ICF-WIPS-MIB::hpnicfWIPSDctNetworkSSIDHide,INTEGER,read-only,,current,true(1):false(2),Represents whether the ESS broadcasted its SSID.
.1.3.6.1.4.1.11.2.14.11.15.2.118.2.6.1.8,HPN-ICF-WIPS-MIB::hpnicfWIPSDctNetworkBSSNum,Integer32,read-only,,current,,Represents the number of APs using the same SSID in the ESS.
.1.3.6.1.4.1.11.2.14.11.15.2.118.2.7,HPN-ICF-WIPS-MIB::hpnicfWIPSDctSSIDBSSTable,,not-accessible,,current,,The table represents the list of APs using the same SSID in the ESS.
.1.3.6.1.4.1.11.2.14.11.15.2.118.2.7.1,HPN-ICF-WIPS-MIB::hpnicfWIPSDctSSIDBSSEntry,,not-accessible,hpnicfWIPSDctNetworkVSD:hpnicfWIPSDctNetworkSSID:hpnicfWIPSDctNetworkCfg:hpnicfWIPSDctNetworkBSSID,current,,Each entry contains possible BSS information of each AP detected by WIPS.
.1.3.6.1.4.1.11.2.14.11.15.2.118.2.7.1.1,HPN-ICF-WIPS-MIB::hpnicfWIPSDctNetworkBSSID,OCTET,not-accessible,,current,,Represents the Basic Service Set.
.1.3.6.1.4.1.11.2.14.11.15.2.118.2.7.1.2,HPN-ICF-WIPS-MIB::hpnicfWIPSDctNetworkBSSWorkChl,Integer32,read-only,,current,,Represents on which radio channel that WIPS sensor AP detected the BSS.
.1.3.6.1.4.1.11.2.14.11.15.2.118.2.7.1.3,HPN-ICF-WIPS-MIB::hpnicfWIPSDctNetworkBSSStaNum,Integer32,read-only,,current,,Represents the number of clients associated with the detected BSS.
.1.3.6.1.4.1.11.2.14.11.15.2.118.2.8,HPN-ICF-WIPS-MIB::hpnicfWIPSBlockListTable,,not-accessible,,current,,The table represents the list of block device MAC address.
.1.3.6.1.4.1.11.2.14.11.15.2.118.2.8.1,HPN-ICF-WIPS-MIB::hpnicfWIPSBlockListEntry,,not-accessible,hpnicfWIPSBlockListMacAddress,current,,Each entry contains block device MAC address information.
.1.3.6.1.4.1.11.2.14.11.15.2.118.2.8.1.1,HPN-ICF-WIPS-MIB::hpnicfWIPSBlockListMacAddress,OCTET,not-accessible,,current,,Represents the MAC address of block device.
.1.3.6.1.4.1.11.2.14.11.15.2.118.2.8.1.2,HPN-ICF-WIPS-MIB::hpnicfWIPSBlockListStatus,INTEGER,read-only,,current,static(1):dynamic(2):staticAndDynamic(3),Represents the status of block device.
.1.3.6.1.4.1.11.2.14.11.15.2.118.2.9,HPN-ICF-WIPS-MIB::hpnicfWIPSChannelTable,,not-accessible,,current,,The table represents the list of channel information.
.1.3.6.1.4.1.11.2.14.11.15.2.118.2.9.1,HPN-ICF-WIPS-MIB::hpnicfWIPSChannelEntry,,not-accessible,hpnicfWIPSChannelNum,current,,Each entry contains channel information.
.1.3.6.1.4.1.11.2.14.11.15.2.118.2.9.1.1,HPN-ICF-WIPS-MIB::hpnicfWIPSChannelNum,Integer32,not-accessible,,current,,Represents the channel number.
.1.3.6.1.4.1.11.2.14.11.15.2.118.2.9.1.2,HPN-ICF-WIPS-MIB::hpnicfWIPSChannelRadioType,INTEGER,read-only,,current,dot11a(1):dot11b(2):dot11g(4):dot11n(8):dot11gn(16):dot11an(32),Represents the radio type used in the specific channel.
.1.3.6.1.4.1.11.2.14.11.15.2.118.2.9.1.3,HPN-ICF-WIPS-MIB::hpnicfWIPSChannelIsPermitted,INTEGER,read-only,,current,true(1):false(2),Represents whether the channel is permitted.
.1.3.6.1.4.1.11.2.14.11.15.2.118.2.9.1.4,HPN-ICF-WIPS-MIB::hpnicfWIPSChannelLastRptTm,TimeTicks,read-only,,current,,Represents the latest time that detecting the channel is active.
.1.3.6.1.4.1.11.2.14.11.15.2.118.2.10,HPN-ICF-WIPS-MIB::hpnicfWIPSCountermeasureListTable,,not-accessible,,current,,The table represents the list of global static countermeasure device information.
.1.3.6.1.4.1.11.2.14.11.15.2.118.2.10.1,HPN-ICF-WIPS-MIB::hpnicfWIPSCountermeasureListEntry,,not-accessible,hpnicfWIPSCtmListMacAddress,current,,Each entry contains countermeasure device information.
.1.3.6.1.4.1.11.2.14.11.15.2.118.2.10.1.1,HPN-ICF-WIPS-MIB::hpnicfWIPSCtmListMacAddress,OCTET,not-accessible,,current,,Represents the MAC address of the countered device.
.1.3.6.1.4.1.11.2.14.11.15.2.118.2.10.1.2,HPN-ICF-WIPS-MIB::hpnicfWIPSCtmListLastestWorkChl,Integer32,read-only,,current,,Represents the channel on which the countermeasure device was working.
.1.3.6.1.4.1.11.2.14.11.15.2.118.2.10.1.3,HPN-ICF-WIPS-MIB::hpnicfWIPSCtmListFirstTm,TimeTicks,read-only,,current,,Represents the first time that the device was countered since system is up.
.1.3.6.1.4.1.11.2.14.11.15.2.118.2.10.1.4,HPN-ICF-WIPS-MIB::hpnicfWIPSCtmListLastTm,TimeTicks,read-only,,current,,Represents the last time that the device was countered since system is up.
.1.3.6.1.4.1.11.2.14.11.15.2.118.2.10.1.5,HPN-ICF-WIPS-MIB::hpnicfWIPSCtmListQurCnt,Integer32,read-only,,current,,Represents how many times that the device was countered. 
.1.3.6.1.4.1.11.2.14.11.15.2.118.2.10.1.6,HPN-ICF-WIPS-MIB::hpnicfWIPSCtmListSensorNum,Integer32,read-only,,current,,Represents the number of sensors detecting the device.
.1.3.6.1.4.1.11.2.14.11.15.2.118.2.11,HPN-ICF-WIPS-MIB::hpnicfWIPSIgnoreListTable,,not-accessible,,current,,The table represents the list of ignored device information.
.1.3.6.1.4.1.11.2.14.11.15.2.118.2.11.1,HPN-ICF-WIPS-MIB::hpnicfWIPSIgnoreListEntry,,not-accessible,hpnicfWIPSIgnoreListMacAddress,current,,Each entry contains ignored device information.
.1.3.6.1.4.1.11.2.14.11.15.2.118.2.11.1.1,HPN-ICF-WIPS-MIB::hpnicfWIPSIgnoreListMacAddress,OCTET,not-accessible,,current,,Represents the MAC address of the ignored device.
.1.3.6.1.4.1.11.2.14.11.15.2.118.2.11.1.2,HPN-ICF-WIPS-MIB::hpnicfWIPSIgnoreListFirstIgnoreTm,TimeTicks,read-only,,current,,Represents the first time when the event caused by the device was ignored since system is up.
.1.3.6.1.4.1.11.2.14.11.15.2.118.2.11.1.3,HPN-ICF-WIPS-MIB::hpnicfWIPSIgnoreListLastIgnoreTm,TimeTicks,read-only,,current,,Represents the last time when the event caused by the device was ignored since system is up.
.1.3.6.1.4.1.11.2.14.11.15.2.118.2.11.1.4,HPN-ICF-WIPS-MIB::hpnicfWIPSIgnoreListIgnoreCnt,Integer32,read-only,,current,,Represents the number of times of the event caused by device has been ignored.
.1.3.6.1.4.1.11.2.14.11.15.2.118.2.12,HPN-ICF-WIPS-MIB::hpnicfWIPSTrustListTable,,not-accessible,,current,,The table represents the list of trust device information.
.1.3.6.1.4.1.11.2.14.11.15.2.118.2.12.1,HPN-ICF-WIPS-MIB::hpnicfWIPSTrustListEntry,,not-accessible,hpnicfWIPSTrustListMacAddress,current,,Each entry contains information of a trust device.
.1.3.6.1.4.1.11.2.14.11.15.2.118.2.12.1.1,HPN-ICF-WIPS-MIB::hpnicfWIPSTrustListMacAddress,OCTET,not-accessible,,current,,Represents the MAC address of the trust device.
.1.3.6.1.4.1.11.2.14.11.15.2.118.2.12.1.2,HPN-ICF-WIPS-MIB::hpnicfWIPSTrustListStatus,INTEGER,read-only,,current,static(1):dynamic(2):staticAndDynamic(3),Represents the status of the trust device.
.1.3.6.1.4.1.11.2.14.11.15.2.118.2.13,HPN-ICF-WIPS-MIB::hpnicfWIPSChlStatTable,,not-accessible,,current,,The table represents the list of channel statistics information.
.1.3.6.1.4.1.11.2.14.11.15.2.118.2.13.1,HPN-ICF-WIPS-MIB::hpnicfWIPSChlStatEntry,,not-accessible,hpnicfWIPSChlStatSensorMacAddr:hpnicfWIPSChlStatChannel,current,,Each entry contains information of channel statistics.
.1.3.6.1.4.1.11.2.14.11.15.2.118.2.13.1.1,HPN-ICF-WIPS-MIB::hpnicfWIPSChlStatSensorMacAddr,OCTET,not-accessible,,current,,Represents the MAC address of sensor.
.1.3.6.1.4.1.11.2.14.11.15.2.118.2.13.1.2,HPN-ICF-WIPS-MIB::hpnicfWIPSChlStatChannel,Integer32,not-accessible,,current,,Represents the statistics channel.
.1.3.6.1.4.1.11.2.14.11.15.2.118.2.13.1.3,HPN-ICF-WIPS-MIB::hpnicfWIPSChlStatTotalPkt,Counter64,read-only,,current,,Represents the count of total frames in the channel.
.1.3.6.1.4.1.11.2.14.11.15.2.118.2.13.1.4,HPN-ICF-WIPS-MIB::hpnicfWIPSChlStatTotalByte,Counter64,read-only,,current,,Represents the length of total frames in the channel.
.1.3.6.1.4.1.11.2.14.11.15.2.118.2.13.1.5,HPN-ICF-WIPS-MIB::hpnicfWIPSChlStatBmcastPkt,Counter64,read-only,,current,,Represents the count of broadcast and multicast frames in the channel.
.1.3.6.1.4.1.11.2.14.11.15.2.118.2.13.1.6,HPN-ICF-WIPS-MIB::hpnicfWIPSChlStatBmcastByte,Counter64,read-only,,current,,Represents the total length of broadcast and multicast frames in the channel.
.1.3.6.1.4.1.11.2.14.11.15.2.118.2.13.1.7,HPN-ICF-WIPS-MIB::hpnicfWIPSChlStatUnicastPkt,Counter64,read-only,,current,,Represents the count of unicast frames in the channel.
.1.3.6.1.4.1.11.2.14.11.15.2.118.2.13.1.8,HPN-ICF-WIPS-MIB::hpnicfWIPSChlStatUnicastByte,Counter64,read-only,,current,,Represents the total length of unicast frames in the channel.
.1.3.6.1.4.1.11.2.14.11.15.2.118.2.13.1.9,HPN-ICF-WIPS-MIB::hpnicfWIPSChlStatManagement,Counter64,read-only,,current,,Represents the count of management frames in the channel.
.1.3.6.1.4.1.11.2.14.11.15.2.118.2.13.1.10,HPN-ICF-WIPS-MIB::hpnicfWIPSChlStatControl,Counter64,read-only,,current,,Represents the count of control frames in the channel.
.1.3.6.1.4.1.11.2.14.11.15.2.118.2.13.1.11,HPN-ICF-WIPS-MIB::hpnicfWIPSChlStatData,Counter64,read-only,,current,,Represents the count of data frames in the channel.
.1.3.6.1.4.1.11.2.14.11.15.2.118.2.13.1.12,HPN-ICF-WIPS-MIB::hpnicfWIPSChlStatBeacon,Counter64,read-only,,current,,Represents the count of beacon frames in the channel.
.1.3.6.1.4.1.11.2.14.11.15.2.118.2.13.1.13,HPN-ICF-WIPS-MIB::hpnicfWIPSChlStatRTS,Counter64,read-only,,current,,Represents the count of RTS frames in the channel.
.1.3.6.1.4.1.11.2.14.11.15.2.118.2.13.1.14,HPN-ICF-WIPS-MIB::hpnicfWIPSChlStatCTS,Counter64,read-only,,current,,Represents the count of CTS frames in the channel.
.1.3.6.1.4.1.11.2.14.11.15.2.118.2.13.1.15,HPN-ICF-WIPS-MIB::hpnicfWIPSChlStatProbeRequest,Counter64,read-only,,current,,Represents the count of probe request frames in the channel.
.1.3.6.1.4.1.11.2.14.11.15.2.118.2.13.1.16,HPN-ICF-WIPS-MIB::hpnicfWIPSChlStatProbeResponse,Counter64,read-only,,current,,Represents the count of probe response frames in the channel.
.1.3.6.1.4.1.11.2.14.11.15.2.118.2.13.1.17,HPN-ICF-WIPS-MIB::hpnicfWIPSChlStatFragment,Counter64,read-only,,current,,Represents the count of fragment frames in the channel.
.1.3.6.1.4.1.11.2.14.11.15.2.118.2.13.1.18,HPN-ICF-WIPS-MIB::hpnicfWIPSChlStatRetry,Counter64,read-only,,current,,Represents the count of retry frames in the channel.
.1.3.6.1.4.1.11.2.14.11.15.2.118.2.13.1.19,HPN-ICF-WIPS-MIB::hpnicfWIPSChlStatEapSuccess,Counter64,read-only,,current,,Represents the count of EAP-Success frames in the channel.
.1.3.6.1.4.1.11.2.14.11.15.2.118.2.13.1.20,HPN-ICF-WIPS-MIB::hpnicfWIPSChlStatEapFailure,Counter64,read-only,,current,,Represents the count of EAP-Failure frames in the channel.
.1.3.6.1.4.1.11.2.14.11.15.2.118.2.13.1.21,HPN-ICF-WIPS-MIB::hpnicfWIPSChlStatEapolStart,Counter64,read-only,,current,,Represents the count of EAPOL-Start frames in the channel.
.1.3.6.1.4.1.11.2.14.11.15.2.118.2.13.1.22,HPN-ICF-WIPS-MIB::hpnicfWIPSChlStatEapolLogoff,Counter64,read-only,,current,,Represents the count of EAPOL-Logoff frames in the channel.
.1.3.6.1.4.1.11.2.14.11.15.2.118.2.13.1.23,HPN-ICF-WIPS-MIB::hpnicfWIPSChlStatAssocRequest,Counter64,read-only,,current,,Represents the count of association request frames in the channel.
.1.3.6.1.4.1.11.2.14.11.15.2.118.2.13.1.24,HPN-ICF-WIPS-MIB::hpnicfWIPSChlStatAssocResponse,Counter64,read-only,,current,,Represents the count of association response frames in the channel.
.1.3.6.1.4.1.11.2.14.11.15.2.118.2.13.1.25,HPN-ICF-WIPS-MIB::hpnicfWIPSChlStatUnicastDisassoc,Counter64,read-only,,current,,Represents the count of unicast disassociation frames in the channel.
.1.3.6.1.4.1.11.2.14.11.15.2.118.2.13.1.26,HPN-ICF-WIPS-MIB::hpnicfWIPSChlStatBroadcastDisassoc,Counter64,read-only,,current,,Represents the count of broadcast disassociation frames in the channel.
.1.3.6.1.4.1.11.2.14.11.15.2.118.2.13.1.27,HPN-ICF-WIPS-MIB::hpnicfWIPSChlStatAuthentication,Counter64,read-only,,current,,Represents the count of authentication frames in the channel.
.1.3.6.1.4.1.11.2.14.11.15.2.118.2.13.1.28,HPN-ICF-WIPS-MIB::hpnicfWIPSChlStatUnicastDeauthen,Counter64,read-only,,current,,Represents the count of unicast deauthentication frames in the channel.
.1.3.6.1.4.1.11.2.14.11.15.2.118.2.13.1.29,HPN-ICF-WIPS-MIB::hpnicfWIPSChlStatBroadcastDeauthen,Counter64,read-only,,current,,Represents the count of broadcast deauthentication frames in the channel.
.1.3.6.1.4.1.11.2.14.11.15.2.118.2.13.1.30,HPN-ICF-WIPS-MIB::hpnicfWIPSChlStatMalformed,Counter64,read-only,,current,,Represents the count of malformed frames in the channel.
.1.3.6.1.4.1.11.2.14.11.15.2.118.2.14,HPN-ICF-WIPS-MIB::hpnicfWIPSDevStatTable,,not-accessible,,current,,The table represents the list of device statistics information.
.1.3.6.1.4.1.11.2.14.11.15.2.118.2.14.1,HPN-ICF-WIPS-MIB::hpnicfWIPSDevStatEntry,,not-accessible,hpnicfWIPSDevStatSensorMacAddr:hpnicfWIPSDevStatDevMacAddress:hpnicfWIPSDevStatChannel,current,,Each entry contains information of device statistics.
.1.3.6.1.4.1.11.2.14.11.15.2.118.2.14.1.1,HPN-ICF-WIPS-MIB::hpnicfWIPSDevStatSensorMacAddr,OCTET,not-accessible,,current,,Represents the MAC address of sensor.
.1.3.6.1.4.1.11.2.14.11.15.2.118.2.14.1.2,HPN-ICF-WIPS-MIB::hpnicfWIPSDevStatDevMacAddress,OCTET,not-accessible,,current,,Represents the MAC address of the device detected by the sensor.
.1.3.6.1.4.1.11.2.14.11.15.2.118.2.14.1.3,HPN-ICF-WIPS-MIB::hpnicfWIPSDevStatChannel,Integer32,not-accessible,,current,,Represents the device working channel.
.1.3.6.1.4.1.11.2.14.11.15.2.118.2.14.1.4,HPN-ICF-WIPS-MIB::hpnicfWIPSDevStatTxTotalPkt,Counter64,read-only,,current,,Represents the count of total frames transmitted by the device in one channel.
.1.3.6.1.4.1.11.2.14.11.15.2.118.2.14.1.5,HPN-ICF-WIPS-MIB::hpnicfWIPSDevStatTxTotalByte,Counter64,read-only,,current,,Represents the length of total frames transmitted by the device in one channel.
.1.3.6.1.4.1.11.2.14.11.15.2.118.2.14.1.6,HPN-ICF-WIPS-MIB::hpnicfWIPSDevStatTxBMcastPkt,Counter64,read-only,,current,,Represents the count of broadcast and multicast frames transmitted by the device in one channel.
.1.3.6.1.4.1.11.2.14.11.15.2.118.2.14.1.7,HPN-ICF-WIPS-MIB::hpnicfWIPSDevStatTxBMcastByte,Counter64,read-only,,current,,Represents the length of broadcast and multicast frames transmitted by the device in one channel.
.1.3.6.1.4.1.11.2.14.11.15.2.118.2.14.1.8,HPN-ICF-WIPS-MIB::hpnicfWIPSDevStatTxUnicastPkt,Counter64,read-only,,current,,Represents the count of unicast frames transmitted by the device in one channel.
.1.3.6.1.4.1.11.2.14.11.15.2.118.2.14.1.9,HPN-ICF-WIPS-MIB::hpnicfWIPSDevStatTxUnicastByte,Counter64,read-only,,current,,Represents the length of unicast frames transmitted by the device in one channel.
.1.3.6.1.4.1.11.2.14.11.15.2.118.2.14.1.10,HPN-ICF-WIPS-MIB::hpnicfWIPSDevStatTxMgmt,Counter64,read-only,,current,,Represents the count of management frames transmitted by the device in one channel.
.1.3.6.1.4.1.11.2.14.11.15.2.118.2.14.1.11,HPN-ICF-WIPS-MIB::hpnicfWIPSDevStatTxCtrl,Counter64,read-only,,current,,Represents the count of control frames transmitted by the device in one channel.
.1.3.6.1.4.1.11.2.14.11.15.2.118.2.14.1.12,HPN-ICF-WIPS-MIB::hpnicfWIPSDevStatTxData,Counter64,read-only,,current,,Represents the count of data frames transmitted by the device in one channel.
.1.3.6.1.4.1.11.2.14.11.15.2.118.2.14.1.13,HPN-ICF-WIPS-MIB::hpnicfWIPSDevStatTxBeacon,Counter64,read-only,,current,,Represents the count of beacon frames transmitted by the device in one channel.
.1.3.6.1.4.1.11.2.14.11.15.2.118.2.14.1.14,HPN-ICF-WIPS-MIB::hpnicfWIPSDevStatTxRTS,Counter64,read-only,,current,,Represents the count of RTS frames transmitted by the device in one channel.
.1.3.6.1.4.1.11.2.14.11.15.2.118.2.14.1.15,HPN-ICF-WIPS-MIB::hpnicfWIPSDevStatTxProbeRequest,Counter64,read-only,,current,,Represents the count of probe request frames transmitted by the device in one channel.
.1.3.6.1.4.1.11.2.14.11.15.2.118.2.14.1.16,HPN-ICF-WIPS-MIB::hpnicfWIPSDevStatTxProbeResponse,Counter64,read-only,,current,,Represents the count of probe response frames transmitted by the device in one channel.
.1.3.6.1.4.1.11.2.14.11.15.2.118.2.14.1.17,HPN-ICF-WIPS-MIB::hpnicfWIPSDevStatTxFragment,Counter64,read-only,,current,,Represents the count of fragment frames transmitted by the device in one channel.
.1.3.6.1.4.1.11.2.14.11.15.2.118.2.14.1.18,HPN-ICF-WIPS-MIB::hpnicfWIPSDevStatTxRetry,Counter64,read-only,,current,,Represents the count of retry frames transmitted by the device in one channel.
.1.3.6.1.4.1.11.2.14.11.15.2.118.2.14.1.19,HPN-ICF-WIPS-MIB::hpnicfWIPSDevStatTxAssocRequest,Counter64,read-only,,current,,Represents the count of association request frames transmitted by the device in one channel.
.1.3.6.1.4.1.11.2.14.11.15.2.118.2.14.1.20,HPN-ICF-WIPS-MIB::hpnicfWIPSDevStatTxAssocResponse,Counter64,read-only,,current,,Represents the count of association response frames transmitted by the device in one channel.
.1.3.6.1.4.1.11.2.14.11.15.2.118.2.14.1.21,HPN-ICF-WIPS-MIB::hpnicfWIPSDevStatTxUnicastDisassoc,Counter64,read-only,,current,,Represents the count of unicast disassociation frames transmitted by the device in one channel.
.1.3.6.1.4.1.11.2.14.11.15.2.118.2.14.1.22,HPN-ICF-WIPS-MIB::hpnicfWIPSDevStatTxBcastDisassoc,Counter64,read-only,,current,,Represents the count of broadcast disassociation frames transmitted by the device in one channel.
.1.3.6.1.4.1.11.2.14.11.15.2.118.2.14.1.23,HPN-ICF-WIPS-MIB::hpnicfWIPSDevStatTxAuth,Counter64,read-only,,current,,Represents the count of authentication frames transmitted by the device in one channel.
.1.3.6.1.4.1.11.2.14.11.15.2.118.2.14.1.24,HPN-ICF-WIPS-MIB::hpnicfWIPSDevStatTxUnicastDeauth,Counter64,read-only,,current,,Represents the count of unicast deauthentication frames transmitted by the device in one channel.
.1.3.6.1.4.1.11.2.14.11.15.2.118.2.14.1.25,HPN-ICF-WIPS-MIB::hpnicfWIPSDevStatTxBcastDeauth,Counter64,read-only,,current,,Represents the count of broadcast deauthentication frames transmitted by the device in one channel.
.1.3.6.1.4.1.11.2.14.11.15.2.118.2.14.1.26,HPN-ICF-WIPS-MIB::hpnicfWIPSDevStatTxEAPSuccess,Counter64,read-only,,current,,Represents the count of EAP-Success frames transmitted by the device in one channel.
.1.3.6.1.4.1.11.2.14.11.15.2.118.2.14.1.27,HPN-ICF-WIPS-MIB::hpnicfWIPSDevStatTxEAPFailure,Counter64,read-only,,current,,Represents the count of EAP-Failure frames transmitted by the device in one channel.
.1.3.6.1.4.1.11.2.14.11.15.2.118.2.14.1.28,HPN-ICF-WIPS-MIB::hpnicfWIPSDevStatTxEAPOLStart,Counter64,read-only,,current,,Represents the count of EAPOL-Start frames transmitted by the device in one channel.
.1.3.6.1.4.1.11.2.14.11.15.2.118.2.14.1.29,HPN-ICF-WIPS-MIB::hpnicfWIPSDevStatTxEAPOLLogOff,Counter64,read-only,,current,,Represents the count of EAPOL-Logoff frames transmitted by the device in one channel.
.1.3.6.1.4.1.11.2.14.11.15.2.118.2.14.1.30,HPN-ICF-WIPS-MIB::hpnicfWIPSDevStatTxMalformed,Counter64,read-only,,current,,Represents the count of malformed frames transmitted by the device in one channel.
.1.3.6.1.4.1.11.2.14.11.15.2.118.2.14.1.31,HPN-ICF-WIPS-MIB::hpnicfWIPSDevStatRxTotalPkt,Counter64,read-only,,current,,Represents the count of total frames received by the device in one channel.
.1.3.6.1.4.1.11.2.14.11.15.2.118.2.14.1.32,HPN-ICF-WIPS-MIB::hpnicfWIPSDevStatRxTotalByte,Counter64,read-only,,current,,Represents the length of total frames received by the device in one channel.
.1.3.6.1.4.1.11.2.14.11.15.2.118.2.14.1.33,HPN-ICF-WIPS-MIB::hpnicfWIPSDevStatRxUnicastPkt,Counter64,read-only,,current,,Represents the count of unicast frames received by the device in one channel.
.1.3.6.1.4.1.11.2.14.11.15.2.118.2.14.1.34,HPN-ICF-WIPS-MIB::hpnicfWIPSDevStatRxUnicastByte,Counter64,read-only,,current,,Represents the length of unicast frames received by the device in one channel.
.1.3.6.1.4.1.11.2.14.11.15.2.118.2.14.1.35,HPN-ICF-WIPS-MIB::hpnicfWIPSDevStatRxMgmt,Counter64,read-only,,current,,Represents the count of management frames received by the device in one channel.
.1.3.6.1.4.1.11.2.14.11.15.2.118.2.14.1.36,HPN-ICF-WIPS-MIB::hpnicfWIPSDevStatRxCtrl,Counter64,read-only,,current,,Represents the count of control frames received by the device in one channel.
.1.3.6.1.4.1.11.2.14.11.15.2.118.2.14.1.37,HPN-ICF-WIPS-MIB::hpnicfWIPSDevStatRxData,Counter64,read-only,,current,,Represents the count of data frames received by the device in one channel.
.1.3.6.1.4.1.11.2.14.11.15.2.118.2.14.1.38,HPN-ICF-WIPS-MIB::hpnicfWIPSDevStatRxRTS,Counter64,read-only,,current,,Represents the count of RTS frames recieved by the device in one channel.
.1.3.6.1.4.1.11.2.14.11.15.2.118.2.14.1.39,HPN-ICF-WIPS-MIB::hpnicfWIPSDevStatRxCTS,Counter64,read-only,,current,,Represents the count of CTS frames recieved by the device in one channel.
.1.3.6.1.4.1.11.2.14.11.15.2.118.2.14.1.40,HPN-ICF-WIPS-MIB::hpnicfWIPSDevStatRxProbeRequest,Counter64,read-only,,current,,Represents the count of probe request frames received by the device in one channel.
.1.3.6.1.4.1.11.2.14.11.15.2.118.2.14.1.41,HPN-ICF-WIPS-MIB::hpnicfWIPSDevStatRxProbeResponse,Counter64,read-only,,current,,Represents the count of probe response frames received by the device in one channel.
.1.3.6.1.4.1.11.2.14.11.15.2.118.2.14.1.42,HPN-ICF-WIPS-MIB::hpnicfWIPSDevStatRxFragment,Counter64,read-only,,current,,Represents the count of fragment frames received by the device in one channel.
.1.3.6.1.4.1.11.2.14.11.15.2.118.2.14.1.43,HPN-ICF-WIPS-MIB::hpnicfWIPSDevStatRxRetry,Counter64,read-only,,current,,Represents the count of retry frames received by the device in one channel.
.1.3.6.1.4.1.11.2.14.11.15.2.118.2.14.1.44,HPN-ICF-WIPS-MIB::hpnicfWIPSDevStatRxAssoRequest,Counter64,read-only,,current,,Represents the count of association request frames received by the device in one channel.
.1.3.6.1.4.1.11.2.14.11.15.2.118.2.14.1.45,HPN-ICF-WIPS-MIB::hpnicfWIPSDevStatRxAssoResponse,Counter64,read-only,,current,,Represents the count of association response frames received by the device in one channel.
.1.3.6.1.4.1.11.2.14.11.15.2.118.2.14.1.46,HPN-ICF-WIPS-MIB::hpnicfWIPSDevStatRxDisassoc,Counter64,read-only,,current,,Represents the count of disassociation frames received by the device in one channel.
.1.3.6.1.4.1.11.2.14.11.15.2.118.2.14.1.47,HPN-ICF-WIPS-MIB::hpnicfWIPSDevStatRxAuth,Counter64,read-only,,current,,Represents the count of authentication frames received by the device in one channel.
.1.3.6.1.4.1.11.2.14.11.15.2.118.2.14.1.48,HPN-ICF-WIPS-MIB::hpnicfWIPSDevStatRxDeauth,Counter64,read-only,,current,,Represents the count of deauthentication frames received by the device in one channel.
.1.3.6.1.4.1.11.2.14.11.15.2.118.2.14.1.49,HPN-ICF-WIPS-MIB::hpnicfWIPSDevStatRxEAPSuccess,Counter64,read-only,,current,,Represents the count of EAP-Success frames received by the device in one channel.
.1.3.6.1.4.1.11.2.14.11.15.2.118.2.14.1.50,HPN-ICF-WIPS-MIB::hpnicfWIPSDevStatRxEAPFailure,Counter64,read-only,,current,,Represents the count of EAP-Failure frames received by the device in one channel.
.1.3.6.1.4.1.11.2.14.11.15.2.118.2.14.1.51,HPN-ICF-WIPS-MIB::hpnicfWIPSDevStatRxEAPOLStart,Counter64,read-only,,current,,Represents the count of EAPOL-Start frames received by the device in one channel.
.1.3.6.1.4.1.11.2.14.11.15.2.118.2.14.1.52,HPN-ICF-WIPS-MIB::hpnicfWIPSDevStatRxEAPOLLogoff,Counter64,read-only,,current,,Represents the count of EAPOL-Logoff frames received by the device in one channel.
.1.3.6.1.4.1.11.2.14.11.15.2.118.2.14.1.53,HPN-ICF-WIPS-MIB::hpnicfWIPSDevStatRxMalformed,Counter64,read-only,,current,,Represents the count of malformed frames received by the device in one channel.
.1.3.6.1.4.1.11.2.14.11.15.2.118.2.15,HPN-ICF-WIPS-MIB::hpnicfWIPSCtmDeviceTable,,not-accessible,,current,,The table represents the list of device information in static and dynamic countermeasure list.
.1.3.6.1.4.1.11.2.14.11.15.2.118.2.15.1,HPN-ICF-WIPS-MIB::hpnicfWIPSCtmDeviceEntry,,not-accessible,hpnicfWIPSCtmDeviceVSD:hpnicfWIPSCtmDeviceMAC,current,,Each entry contains information of countermeasure device.
.1.3.6.1.4.1.11.2.14.11.15.2.118.2.15.1.1,HPN-ICF-WIPS-MIB::hpnicfWIPSCtmDeviceVSD,OCTET,not-accessible,,current,,Represents the VSD which the device belongs to.
.1.3.6.1.4.1.11.2.14.11.15.2.118.2.15.1.2,HPN-ICF-WIPS-MIB::hpnicfWIPSCtmDeviceMAC,OCTET,not-accessible,,current,,Represents the MAC address of countermeasure device.
.1.3.6.1.4.1.11.2.14.11.15.2.118.2.15.1.3,HPN-ICF-WIPS-MIB::hpnicfWIPSCtmDeviceType,INTEGER,read-only,,current,static(1):dynamic(2):staticAnddynamic(3),Represents the type of countermeasure device.
.1.3.6.1.4.1.11.2.14.11.15.2.118.2.15.1.4,HPN-ICF-WIPS-MIB::hpnicfWIPSCtmDeviceState,INTEGER,read-only,,current,none(0):idle(1):pending(2):action(3),Represents the state of countermeasure device.
.1.3.6.1.4.1.11.2.14.11.15.2.118.2.15.1.5,HPN-ICF-WIPS-MIB::hpnicfWIPSCtmDeviceStartTime,TimeTicks,read-only,,current,,Represents the time when start to counter on the device.
.1.3.6.1.4.1.11.2.14.11.15.2.118.2.15.1.6,HPN-ICF-WIPS-MIB::hpnicfWIPSCtmDeviceCategory,INTEGER,read-only,,current,none(0):authorizedAP(1):authorizedClient(2):misconfiguredAP(3):rogueAP(4):unauthorizedClient(5):externalAP(6):adhoc(7):bridge(8):misassociatedClient(9):potentialAuthorizedAP(10):potentialRogueAP(11):potentialExternalAP(12):uncategorizedAP(13):uncategorizedClient(14),Represents the category of the device.
.1.3.6.1.4.1.11.2.14.11.15.2.118.2.15.1.7,HPN-ICF-WIPS-MIB::hpnicfWIPSCtmDeviceChl,Unsigned32,read-only,,current,,Represents the channel on which the device is countered.
.1.3.6.1.4.1.11.2.14.11.15.2.118.2.15.1.8,HPN-ICF-WIPS-MIB::hpnicfWIPSCtmDevicePrecedence,Integer32,read-only,,current,,Represents the precedence of the device.
.1.3.6.1.4.1.11.2.14.11.15.2.118.2.16,HPN-ICF-WIPS-MIB::hpnicfWIPSMalPktStatTable,,not-accessible,,current,,The table represents the list of malformed packet statistics information.
.1.3.6.1.4.1.11.2.14.11.15.2.118.2.16.1,HPN-ICF-WIPS-MIB::hpnicfWIPSMalPktStatEntry,,not-accessible,hpnicfWIPSMalPktStatSensorMAC,current,,Each entry contains information of malformed pakcet.
.1.3.6.1.4.1.11.2.14.11.15.2.118.2.16.1.1,HPN-ICF-WIPS-MIB::hpnicfWIPSMalPktStatSensorMAC,OCTET,not-accessible,,current,,Represents the MAC address of sensor.
.1.3.6.1.4.1.11.2.14.11.15.2.118.2.16.1.2,HPN-ICF-WIPS-MIB::hpnicfWIPSMalPktStatInvalidIELength,Counter64,read-only,,current,,Represents the count of the invalid IE length malformed packets.
.1.3.6.1.4.1.11.2.14.11.15.2.118.2.16.1.3,HPN-ICF-WIPS-MIB::hpnicfWIPSMalPktStatDuplicatedIE,Counter64,read-only,,current,,Represents the count of the duplicated IE malformed packets.
.1.3.6.1.4.1.11.2.14.11.15.2.118.2.16.1.4,HPN-ICF-WIPS-MIB::hpnicfWIPSMalPktStatRedundantIE,Counter64,read-only,,current,,Represents the count of the redundant IE malformed packets.
.1.3.6.1.4.1.11.2.14.11.15.2.118.2.16.1.5,HPN-ICF-WIPS-MIB::hpnicfWIPSMalPktStatInvalidPktLength,Counter64,read-only,,current,,Represents the count of the invalide packet length malformed packets.
.1.3.6.1.4.1.11.2.14.11.15.2.118.2.16.1.6,HPN-ICF-WIPS-MIB::hpnicfWIPSMalPktStatIllegalIBSSESS,Counter64,read-only,,current,,Represents the count of the illegal bits of representing IBSS and ESS malformed packets.
.1.3.6.1.4.1.11.2.14.11.15.2.118.2.16.1.7,HPN-ICF-WIPS-MIB::hpnicfWIPSMalPktStatInvalidSourceAddr,Counter64,read-only,,current,,Represents the count of invalid source address combination malformed pakcets.
.1.3.6.1.4.1.11.2.14.11.15.2.118.2.16.1.8,HPN-ICF-WIPS-MIB::hpnicfWIPSMalPktStatOverflowEAPOLKey,Counter64,read-only,,current,,Represents the count of the overflow EAPOL key malformed packets.
.1.3.6.1.4.1.11.2.14.11.15.2.118.2.16.1.9,HPN-ICF-WIPS-MIB::hpnicfWIPSMalPktStatMalAuth,Counter64,read-only,,current,,Represents the count of the malformed authentication packets.
.1.3.6.1.4.1.11.2.14.11.15.2.118.2.16.1.10,HPN-ICF-WIPS-MIB::hpnicfWIPSMalPktStatMalAssoReq,Counter64,read-only,,current,,Represents the count of the malformed association request packets.
.1.3.6.1.4.1.11.2.14.11.15.2.118.2.16.1.11,HPN-ICF-WIPS-MIB::hpnicfWIPSMalPktStatMalHTIE,Counter64,read-only,,current,,Represents the count of the malformed High Throughput IE segment packets.
.1.3.6.1.4.1.11.2.14.11.15.2.118.2.16.1.12,HPN-ICF-WIPS-MIB::hpnicfWIPSMalPktStatLargeDuration,Counter64,read-only,,current,,Represents the count of the malformed large duration packets.
.1.3.6.1.4.1.11.2.14.11.15.2.118.2.16.1.13,HPN-ICF-WIPS-MIB::hpnicfWIPSMalPktStatNULLProbeRes,Counter64,read-only,,current,,Represents the count of the malformed null probe response packets.
.1.3.6.1.4.1.11.2.14.11.15.2.118.2.16.1.14,HPN-ICF-WIPS-MIB::hpnicfWIPSMalPktStatInvalidDeAuthCode,Counter64,read-only,,current,,Represents the count of the malformed invalid deauthentication reason code packets.
.1.3.6.1.4.1.11.2.14.11.15.2.118.2.16.1.15,HPN-ICF-WIPS-MIB::hpnicfWIPSMalPktStatInvalidDisAssoCode,Counter64,read-only,,current,,Represents the count of the malformed invalid disassociation reason code packets.
.1.3.6.1.4.1.11.2.14.11.15.2.118.2.16.1.16,HPN-ICF-WIPS-MIB::hpnicfWIPSMalPktStatOverflowSSID,Counter64,read-only,,current,,Represents the count of the malformed SSID length overflow packets.
.1.3.6.1.4.1.11.2.14.11.15.2.118.2.16.1.17,HPN-ICF-WIPS-MIB::hpnicfWIPSMalPktStatFatajack,Counter64,read-only,,current,,Represents the count of FATA-Jack attack pakcets.
.1.3.6.1.4.1.11.2.14.11.15.2.118.3,HPN-ICF-WIPS-MIB::hpnicfWIPSNotifyGroup,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.2.119,HPN-ICF-OID-MIB::hpnicfInfoCenter,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.2.119.1,HPN-ICF-INFOCENTER-MIB::hpnicfICLogbuffer,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.2.119.1.1,HPN-ICF-INFOCENTER-MIB::hpnicfICLogbufferObjects,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.2.119.1.1.1,HPN-ICF-INFOCENTER-MIB::hpnicfICMaxLogbufferSize,Unsigned32,read-only,,current,,The maximum number of messages that can be stored in logbuffer.
.1.3.6.1.4.1.11.2.14.11.15.2.119.1.1.2,HPN-ICF-INFOCENTER-MIB::hpnicfICLogbufferSize,Unsigned32,read-write,,current,,The capacity of logbuffer which can be customized by users. The valid range is from 0 to hpnicfICMaxLogbufferSize.
.1.3.6.1.4.1.11.2.14.11.15.2.119.1.1.3,HPN-ICF-INFOCENTER-MIB::hpnicfICLogbufferCurrentMessages,Unsigned32,read-only,,current,,The number of log messages stored in logbuffer.
.1.3.6.1.4.1.11.2.14.11.15.2.119.1.1.4,HPN-ICF-INFOCENTER-MIB::hpnicfICLogbufferOverwrittenMessages,Counter32,read-only,,current,,The number of log messages overwritten in logbuffer.
.1.3.6.1.4.1.11.2.14.11.15.2.119.1.1.5,HPN-ICF-INFOCENTER-MIB::hpnicfICLogbufferDroppedMessages,Counter32,read-only,,current,,The number of log messages dropped in logbuffer.
.1.3.6.1.4.1.11.2.14.11.15.2.119.1.2,HPN-ICF-INFOCENTER-MIB::hpnicfICLogbufferContTable,,not-accessible,,current,,The table of logbuffer contents.
.1.3.6.1.4.1.11.2.14.11.15.2.119.1.2.1,HPN-ICF-INFOCENTER-MIB::hpnicfICLogbufferContEntry,,not-accessible,hpnicfICLogbufferContIndex,current,,The contents entry of logbuffer.
.1.3.6.1.4.1.11.2.14.11.15.2.119.1.2.1.1,HPN-ICF-INFOCENTER-MIB::hpnicfICLogbufferContIndex,Integer32,not-accessible,,current,,The index of this table.
.1.3.6.1.4.1.11.2.14.11.15.2.119.1.2.1.2,HPN-ICF-INFOCENTER-MIB::hpnicfICLogbufferContDescription,OCTET,read-only,,current,,The contents of logbuffer.
.1.3.6.1.4.1.11.2.14.11.15.2.119.2,HPN-ICF-INFOCENTER-MIB::hpnicfICLoghost,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.2.119.2.1,HPN-ICF-INFOCENTER-MIB::hpnicfICLoghostObjects,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.2.119.2.1.1,HPN-ICF-INFOCENTER-MIB::hpnicfICMaxLoghost,Unsigned32,read-only,,current,,The object shows the maximum number of rows in hpnicfLoghostTable.
.1.3.6.1.4.1.11.2.14.11.15.2.119.2.1.2,HPN-ICF-INFOCENTER-MIB::hpnicfICLoghostSourceInterface,Integer32,read-write,,current,,The source interface which sends message to loghost. All loghosts use the same source interface. Zero is invalid.
.1.3.6.1.4.1.11.2.14.11.15.2.119.2.1.3,HPN-ICF-INFOCENTER-MIB::hpnicfICLoghostTimestampType,INTEGER,read-write,,current,date(0):boot(1):iso(2):dateWithoutYear(3):none(4),Time stamp type of message sent to loghost.
.1.3.6.1.4.1.11.2.14.11.15.2.119.2.2,HPN-ICF-INFOCENTER-MIB::hpnicfICLoghostTable,,not-accessible,,current,,The table of loghost.
.1.3.6.1.4.1.11.2.14.11.15.2.119.2.2.1,HPN-ICF-INFOCENTER-MIB::hpnicfICLoghostEntry,,not-accessible,hpnicfICLoghostIndex,current,,The loghost entry of syslog.
.1.3.6.1.4.1.11.2.14.11.15.2.119.2.2.1.1,HPN-ICF-INFOCENTER-MIB::hpnicfICLoghostIndex,Unsigned32,not-accessible,,current,,The index of this table.
.1.3.6.1.4.1.11.2.14.11.15.2.119.2.2.1.2,HPN-ICF-INFOCENTER-MIB::hpnicfICLoghostIpaddressType,INTEGER,read-create,,current,unknown(0):ipv4(1):ipv6(2):ipv4z(3):ipv6z(4):dns(16),The IP address type of loghost.
.1.3.6.1.4.1.11.2.14.11.15.2.119.2.2.1.3,HPN-ICF-INFOCENTER-MIB::hpnicfICLoghostIpaddress,OCTET,read-create,,current,,The IP address of loghost.
.1.3.6.1.4.1.11.2.14.11.15.2.119.2.2.1.4,HPN-ICF-INFOCENTER-MIB::hpnicfICLoghostVPNName,OCTET,read-create,,current,,The VPN instance of loghost.
.1.3.6.1.4.1.11.2.14.11.15.2.119.2.2.1.5,HPN-ICF-INFOCENTER-MIB::hpnicfICLoghostFacility,INTEGER,read-create,,current,kernel(0):userLevel(1):mailSystem(2):systemDaemons(3):securityAuthorization(4):internallyMessages(5):linePrinter(6):networkNews(7):uucp(8):clockDaemon(9):securityAuthorization2(10):ftpDaemon(11):ntp(12):logAudit(13):logAlert(14):clockDaemon2(15):local0(16):local1(17):local2(18):local3(19):local4(20):local5(21):local6(22):local7(23),The operations staff can selectively filter the messages with priority which consists of facility that generates the message and severity of the message. 
.1.3.6.1.4.1.11.2.14.11.15.2.119.2.2.1.6,HPN-ICF-INFOCENTER-MIB::hpnicfICLoghostOperateRowStatus,INTEGER,read-create,,current,active(1):notInService(2):notReady(3):createAndGo(4):createAndWait(5):destroy(6),The status of this table entry.
.1.3.6.1.4.1.11.2.14.11.15.2.119.2.2.1.7,HPN-ICF-INFOCENTER-MIB::hpnicfICLoghostIpaddressPort,Unsigned32,read-create,,current,,The loghost server port.
.1.3.6.1.4.1.11.2.14.11.15.2.119.2.2.1.8,HPN-ICF-INFOCENTER-MIB::hpnicfICLoghostTAddress,OCTET,read-create,,current,,The loghost server transport address. Consist of hpnicfICLoghostIpaddress(ipv4) and hpnicfICLoghostIpaddressPort. This node can't be bound with hpnicfICLoghostIpaddress, hpnicfICLoghostIpaddressPort and hpnicfICLoghostIpaddressType at the same time.
.1.3.6.1.4.1.11.2.14.11.15.2.119.3,HPN-ICF-INFOCENTER-MIB::hpnicfICDirection,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.2.119.3.1,HPN-ICF-INFOCENTER-MIB::hpnicfICDirectionTable,,not-accessible,,current,,A table of syslog output direction.
.1.3.6.1.4.1.11.2.14.11.15.2.119.3.1.1,HPN-ICF-INFOCENTER-MIB::hpnicfICDirectionEntry,,not-accessible,hpnicfICDirectionIndex,current,,The output direction entry of syslog.
.1.3.6.1.4.1.11.2.14.11.15.2.119.3.1.1.1,HPN-ICF-INFOCENTER-MIB::hpnicfICDirectionIndex,Unsigned32,not-accessible,,current,,The index of this table.
.1.3.6.1.4.1.11.2.14.11.15.2.119.3.1.1.2,HPN-ICF-INFOCENTER-MIB::hpnicfICDirectionName,OCTET,read-only,,current,,The name of output direction.
.1.3.6.1.4.1.11.2.14.11.15.2.119.3.1.1.3,HPN-ICF-INFOCENTER-MIB::hpnicfICDirectionState,INTEGER,read-write,,current,true(1):false(2),The state of syslog: true(1):enable. false(2):disable.
.1.3.6.1.4.1.11.2.14.11.15.2.119.4,HPN-ICF-INFOCENTER-MIB::hpnicfICModule,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.2.119.4.1,HPN-ICF-INFOCENTER-MIB::hpnicfICModuleTable,,not-accessible,,current,,A table of syslog module.
.1.3.6.1.4.1.11.2.14.11.15.2.119.4.1.1,HPN-ICF-INFOCENTER-MIB::hpnicfICModuleEntry,,not-accessible,IMPLIEDhpnicfICModuleName,current,,The module entry of syslog.
.1.3.6.1.4.1.11.2.14.11.15.2.119.4.1.1.1,HPN-ICF-INFOCENTER-MIB::hpnicfICModuleName,OCTET,read-only,,current,,The name of module.
.1.3.6.1.4.1.11.2.14.11.15.2.119.5,HPN-ICF-INFOCENTER-MIB::hpnicfICLog,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.2.119.5.1,HPN-ICF-INFOCENTER-MIB::hpnicfICLogObjects,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.2.119.5.1.1,HPN-ICF-INFOCENTER-MIB::hpnicfICLogGlobalState,INTEGER,read-write,,current,true(1):false(2),The global state of syslog: true(1):enable. false(2):disable.
.1.3.6.1.4.1.11.2.14.11.15.2.119.5.1.2,HPN-ICF-INFOCENTER-MIB::hpnicfICLogTimestampType,INTEGER,read-write,,current,date(0):boot(1):iso(2):dateWithoutYear(3):none(4),Time stamp type of log message.
.1.3.6.1.4.1.11.2.14.11.15.2.119.5.2,HPN-ICF-INFOCENTER-MIB::hpnicfICLogTable,,not-accessible,,current,,A table of syslog module.
.1.3.6.1.4.1.11.2.14.11.15.2.119.5.2.1,HPN-ICF-INFOCENTER-MIB::hpnicfICLogEntry,,not-accessible,hpnicfICDirectionIndex:IMPLIEDhpnicfICModuleName,current,,The log entry of syslog.
.1.3.6.1.4.1.11.2.14.11.15.2.119.5.2.1.1,HPN-ICF-INFOCENTER-MIB::hpnicfICLogLevel,INTEGER,read-create,,current,emergency(0):alert(1):critical(2):error(3):warning(4):notice(5):informational(6):debug(7):invalid(8),The level of log message, invalid is for deny any log.
.1.3.6.1.4.1.11.2.14.11.15.2.119.5.2.1.2,HPN-ICF-INFOCENTER-MIB::hpnicfICLogRowStatus,INTEGER,read-create,,current,active(1):notInService(2):notReady(3):createAndGo(4):createAndWait(5):destroy(6),The status of this table entry.
.1.3.6.1.4.1.11.2.14.11.15.2.120,HPN-ICF-OID-MIB::hpnicfFCoE,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.2.120.1,HPN-ICF-FCOE-MIB::hpnicfFCoEObjects,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.2.120.1.1,HPN-ICF-FCOE-MIB::hpnicfFCoEConfig,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.2.120.1.1.1,HPN-ICF-FCOE-MIB::hpnicfFCoECfgTable,,not-accessible,,current,,This table facilitates configuration of FCoE parameters on a per Fibre Channel management instance.
.1.3.6.1.4.1.11.2.14.11.15.2.120.1.1.1.1,HPN-ICF-FCOE-MIB::hpnicfFCoECfgEntry,,not-accessible,fcmInstanceIndex,current,,There is one entry in this table for each Fibre Channel management instance.
.1.3.6.1.4.1.11.2.14.11.15.2.120.1.1.1.1.1,HPN-ICF-FCOE-MIB::hpnicfFCoECfgFcmap,OCTET,read-write,,current,,This object configures the FC-MAP value used by the FCF when operating in FPMA mode. The default value is 0EFC00h, as written in the standard.
.1.3.6.1.4.1.11.2.14.11.15.2.120.1.1.1.1.2,HPN-ICF-FCOE-MIB::hpnicfFCoECfgDynamicVfcCreation,INTEGER,read-write,,current,true(1):false(2),This object is set to 'true' to enable, or 'false' to disable, the dynamic creation of VFC interfaces on this FCF. When set to 'true', VFC interfaces are dynamically created as and when a FIP-based FLOGI or ELP request is received.
.1.3.6.1.4.1.11.2.14.11.15.2.120.1.1.1.1.3,HPN-ICF-FCOE-MIB::hpnicfFCoECfgDefaultFCFPriority,Unsigned32,read-write,,current,,The FIP priority value advertised by the FCF to ENodes by default. hpnicfFCoEStaticVfcFCFPriority configured for a VFC interface overrides this setting for the ENode associated with the VFC.
.1.3.6.1.4.1.11.2.14.11.15.2.120.1.1.1.1.4,HPN-ICF-FCOE-MIB::hpnicfFCoECfgDATov,Unsigned32,read-write,,current,,The Discovery_Advertisement_Timeout value configured for the FCF. This is used as the timeout value in seconds by the FCF to send periodic Discovery Advertisements.
.1.3.6.1.4.1.11.2.14.11.15.2.120.1.1.1.1.5,HPN-ICF-FCOE-MIB::hpnicfFCoECfgAddressingMode,INTEGER,read-write,,current,fpma(1):spma(2):fpmaAndSpma(3),Addressing mode(s) supported by the FCF. Implementations should fail SetRequests for unsupported modes.
.1.3.6.1.4.1.11.2.14.11.15.2.120.1.1.2,HPN-ICF-FCOE-MIB::hpnicfFCoEVLANTable,,not-accessible,,current,,In fabrics in which VLANs are deployed, this table facilitates configuration of VLAN and Virtual Fabric associations in an FCoE network. In such fabrics, FCoE forwarding for a fabric is over a VLAN in a (Layer-2) Ethernet network. That is, reachability between the ENode/remote-FCF and an FCF for a given fabric is determined by the reachability provided by the Ethernet network on the corresponding VLAN. An active entry in this table indicates which VLAN is used to transport FCoE traffic for a particular Virtual Fabric. If VLANs are not deployed or not enabled, entries in this table are ignored by the bridge. Some implmentations may allow traffic from only one Virtual Fabric to be transported over a given VLAN. Such implementations should prevent multiple entries with the same VLAN-ID from being created in this table. Modifying existing VLAN-Virtual Fabric associations is not possible. The specific row must first be deleted and then a new one created.
.1.3.6.1.4.1.11.2.14.11.15.2.120.1.1.2.1,HPN-ICF-FCOE-MIB::hpnicfFCoEVLANEntry,,not-accessible,fcmInstanceIndex:hpnicfFCoEVLANIndex:hpnicfFCoEFabricIndex,current,,There is one entry in this table for each VLAN that is designated to transport FCoE traffic for a given Virtual Fabric.
.1.3.6.1.4.1.11.2.14.11.15.2.120.1.1.2.1.1,HPN-ICF-FCOE-MIB::hpnicfFCoEVLANIndex,Unsigned32,not-accessible,,current,,This object identifies the VLAN-ID that the FCoE FCF function is being enabled for.
.1.3.6.1.4.1.11.2.14.11.15.2.120.1.1.2.1.2,HPN-ICF-FCOE-MIB::hpnicfFCoEFabricIndex,Unsigned32,not-accessible,,current,,This object identifies the Fabric Index of the Virtual Fabric traffic which is to be transported over the VLAN identified by hpnicfFCoEVLANIndex.
.1.3.6.1.4.1.11.2.14.11.15.2.120.1.1.2.1.3,HPN-ICF-FCOE-MIB::hpnicfFCoEVLANOperState,INTEGER,read-only,,current,up(1):down(2),Operational state of this VLAN-Virtual Fabric association entry. The 'up' state is achieved when both the Virtual Fabric and VLAN are valid.
.1.3.6.1.4.1.11.2.14.11.15.2.120.1.1.2.1.4,HPN-ICF-FCOE-MIB::hpnicfFCoEVLANRowStatus,INTEGER,read-create,,current,active(1):notInService(2):notReady(3):createAndGo(4):createAndWait(5):destroy(6),The status of this conceptual row. The RowStatus becomes active on successful creation of an entry.
.1.3.6.1.4.1.11.2.14.11.15.2.120.1.1.3,HPN-ICF-FCOE-MIB::hpnicfFCoEStaticVfcTable,,not-accessible,,current,,This table facilitates the creation and deletion of static VFC interfaces. While VFCs can be dynamically created based on FIP FLOGI/ELP requests, operators may want to associate certain pre-configured policy for a particular ENode or a remote-FCF. In such cases static VFC creation becomes necessary. In addition to being creating, a static VFC also needs to be associated to an ENode or remote-FCF. The VFC binding provides such an associaton. The binding does not need to be specified when the row for a VFC is created, but may be specified later.
.1.3.6.1.4.1.11.2.14.11.15.2.120.1.1.3.1,HPN-ICF-FCOE-MIB::hpnicfFCoEStaticVfcEntry,,not-accessible,fcmInstanceIndex:hpnicfFCoEStaticVfcIndex,current,,There is one entry in this table for each statically created VFC Interface.
.1.3.6.1.4.1.11.2.14.11.15.2.120.1.1.3.1.1,HPN-ICF-FCOE-MIB::hpnicfFCoEStaticVfcIndex,Unsigned32,not-accessible,,current,,This index uniquely identifies a static VFC entry in this table.
.1.3.6.1.4.1.11.2.14.11.15.2.120.1.1.3.1.2,HPN-ICF-FCOE-MIB::hpnicfFCoEStaticVfcFCFPriority,Unsigned32,read-create,,current,,If this VFC is for a VF_Port this object is used to configure FCF priority to be advertised to the ENode associated with the VFC.
.1.3.6.1.4.1.11.2.14.11.15.2.120.1.1.3.1.3,HPN-ICF-FCOE-MIB::hpnicfFCoEStaticVfcBindType,INTEGER,read-create,,current,interfaceIndex(1):macAddress(2),The mechanism to identify the ENode associated with this VFC if it is of type VF_Port or to identify the remote-FCF associated with this VFC if it is of type VE_Port.
.1.3.6.1.4.1.11.2.14.11.15.2.120.1.1.3.1.4,HPN-ICF-FCOE-MIB::hpnicfFCoEStaticVfcBindIfIndex,Integer32,read-create,,current,,This object is applicable only when the local FCF is directly connected to an ENode or remote-FCF over a specific Ethernet interface, in which case this object contains the ifIndex of said Ethernet interface. If the ENode or remote-FCF is not directly connected to the FCF, this value of this object is zero.
.1.3.6.1.4.1.11.2.14.11.15.2.120.1.1.3.1.5,HPN-ICF-FCOE-MIB::hpnicfFCoEStaticVfcBindMACAddress,OCTET,read-create,,current,,This object is applicable when the ENode or remote-FCF to which the local FCF is connected is identified by a MAC address. A FIP frame from a ENode or remote-FCF is associated with this VFC only if the source MAC address in the frame is the same as the value of this object.
.1.3.6.1.4.1.11.2.14.11.15.2.120.1.1.3.1.6,HPN-ICF-FCOE-MIB::hpnicfFCoEStaticVfcIfIndex,Integer32,read-only,,current,,The ifIndex of this Virtual FC interface.
.1.3.6.1.4.1.11.2.14.11.15.2.120.1.1.3.1.7,HPN-ICF-FCOE-MIB::hpnicfFCoEStaticVfcCreationTime,TimeTicks,read-only,,current,,The timestamp of this entry's creation time.
.1.3.6.1.4.1.11.2.14.11.15.2.120.1.1.3.1.8,HPN-ICF-FCOE-MIB::hpnicfFCoEStaticVfcFailureCause,OCTET,read-only,,current,,The cause of failure for the last bind operation. This object will be zero length if and only if the bind is successful.
.1.3.6.1.4.1.11.2.14.11.15.2.120.1.1.3.1.9,HPN-ICF-FCOE-MIB::hpnicfFCoEStaticVfcRowStatus,INTEGER,read-create,,current,active(1):notInService(2):notReady(3):createAndGo(4):createAndWait(5):destroy(6),The status of this conceptual row. The RowStatus becomes active on successful creation of a VFC. The VFC does not need to be bound for the row to be active, but the VFC must be bound before becoming operational.
.1.3.6.1.4.1.11.2.14.11.15.2.120.1.1.4,HPN-ICF-FCOE-MIB::hpnicfFCoEFIPSnoopingTable,,not-accessible,,current,,FCoE provides increased flexibility, but with this flexibility new challenges arise in assuring highly robust Fabrics. The FCF does not have the complete control that a Fibre Channel switch has. Ethernet bridges commonly provide a feature called Access Control Lists (ACLs). Properly configured ACLs may emulate a point-to-point link by providing the traffic enforcement previously discussed. Furthermore, the FIP protocol has been designed to enable Ethernet bridges to efficiently monitor FIP frames passing through them. This data facilitates the automatic configuration of these ACLs. In addition, the automatic configuration is possible independent of any other ACLs that may be in use in the network for other applications. And FIP Snooping is to maintain these ACLs.
.1.3.6.1.4.1.11.2.14.11.15.2.120.1.1.4.1,HPN-ICF-FCOE-MIB::hpnicfFCoEFIPSnoopingEntry,,not-accessible,fcmInstanceIndex:hpnicfFCoEFIPSnoopingVLANIndex,current,,There is one entry in this table for each VLAN that is designated to ensures that only valid FCoE traffic is allowed.
.1.3.6.1.4.1.11.2.14.11.15.2.120.1.1.4.1.1,HPN-ICF-FCOE-MIB::hpnicfFCoEFIPSnoopingVLANIndex,Unsigned32,not-accessible,,current,,This object identifies the VLAN-ID that the FIP Snooping function is being enabled for.
.1.3.6.1.4.1.11.2.14.11.15.2.120.1.1.4.1.2,HPN-ICF-FCOE-MIB::hpnicfFCoEFIPSnoopingEnable,INTEGER,read-write,,current,true(1):false(2),This object is used to enable or disable FIP Snooping on an Ethernet Bridge.
.1.3.6.1.4.1.11.2.14.11.15.2.120.1.1.4.1.3,HPN-ICF-FCOE-MIB::hpnicfFCoEFIPSnoopingFcmap,OCTET,read-write,,current,,This object configures the FC-MAP value associated with the FIP snooping Ethernet Bridge.
.1.3.6.1.4.1.11.2.14.11.15.2.121,HPN-ICF-OID-MIB::hpnicfTRNG2,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.2.121.1,HPN-ICF-TRNG2-MIB::hpnicfTRNG2MibObjects,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.2.121.1.1,HPN-ICF-TRNG2-MIB::hpnicfTrangeCreateTimerangeTable,,not-accessible,,current,,Creat TimeRange.
.1.3.6.1.4.1.11.2.14.11.15.2.121.1.1.1,HPN-ICF-TRNG2-MIB::hpnicfTrangeCreateTimerangeEntry,,not-accessible,hpnicfTrangeIndex,current,,Define the entry of hpnicfTrangeCreateTimerangeTable
.1.3.6.1.4.1.11.2.14.11.15.2.121.1.1.1.1,HPN-ICF-TRNG2-MIB::hpnicfTrangeIndex,Integer32,not-accessible,,current,,TimeRange's index
.1.3.6.1.4.1.11.2.14.11.15.2.121.1.1.1.2,HPN-ICF-TRNG2-MIB::hpnicfTrangeName,OCTET,read-create,,current,,TimeRange's name
.1.3.6.1.4.1.11.2.14.11.15.2.121.1.1.1.3,HPN-ICF-TRNG2-MIB::hpnicfTrangeValidFlag,INTEGER,read-only,,current,true(1):false(2),Valid or Invalid flag
.1.3.6.1.4.1.11.2.14.11.15.2.121.1.1.1.4,HPN-ICF-TRNG2-MIB::hpnicfTrangeCreateRowStatus,INTEGER,read-create,,current,active(1):notInService(2):notReady(3):createAndGo(4):createAndWait(5):destroy(6),The status of this conceptual row.Now only realize CreateAndGo and Destroy and Active.
.1.3.6.1.4.1.11.2.14.11.15.2.121.1.2,HPN-ICF-TRNG2-MIB::hpnicfTrangeAbsoluteTable,,not-accessible,,current,,Creat absoluteness time item of the TimeRange
.1.3.6.1.4.1.11.2.14.11.15.2.121.1.2.1,HPN-ICF-TRNG2-MIB::hpnicfTrangeAbsoluteEntry,,not-accessible,hpnicfTrangeAbsoluteNameIndex:hpnicfTrangeAbsoluteSubIndex,current,,Define the entry of hpnicfTrangeAbsoluteTable
.1.3.6.1.4.1.11.2.14.11.15.2.121.1.2.1.1,HPN-ICF-TRNG2-MIB::hpnicfTrangeAbsoluteNameIndex,Integer32,not-accessible,,current,,TimeRange's index
.1.3.6.1.4.1.11.2.14.11.15.2.121.1.2.1.2,HPN-ICF-TRNG2-MIB::hpnicfTrangeAbsoluteSubIndex,Integer32,not-accessible,,current,,SubItem's index
.1.3.6.1.4.1.11.2.14.11.15.2.121.1.2.1.3,HPN-ICF-TRNG2-MIB::hpnicfTrangeAbsoluteStartTime,OCTET,read-create,,current,,Start point of the timerange.The format defined like 'YYYY-MM-DD,hh:mm:0.0'.
.1.3.6.1.4.1.11.2.14.11.15.2.121.1.2.1.4,HPN-ICF-TRNG2-MIB::hpnicfTrangeAbsoluteEndTime,OCTET,read-create,,current,,End point of the timerange.The format defined like 'YYYY-MM-DD,hh:mm:0.0'.
.1.3.6.1.4.1.11.2.14.11.15.2.121.1.2.1.5,HPN-ICF-TRNG2-MIB::hpnicfTrangeAbsolueRowStatus,INTEGER,read-create,,current,active(1):notInService(2):notReady(3):createAndGo(4):createAndWait(5):destroy(6),The status of this conceptual row. Now only realize CreateAndGo and Destroy and Active.
.1.3.6.1.4.1.11.2.14.11.15.2.121.1.3,HPN-ICF-TRNG2-MIB::hpnicfTrangePeriodicTable,,not-accessible,,current,,Creat periodic time item of the TimeRange
.1.3.6.1.4.1.11.2.14.11.15.2.121.1.3.1,HPN-ICF-TRNG2-MIB::hpnicfTrangePeriodicEntry,,not-accessible,hpnicfTrangePeriodicNameIndex:hpnicfTrangePeriodicSubIndex,current,,Define the index of hpnicfTrangePeriodicTable
.1.3.6.1.4.1.11.2.14.11.15.2.121.1.3.1.1,HPN-ICF-TRNG2-MIB::hpnicfTrangePeriodicNameIndex,Integer32,not-accessible,,current,,TimeRange's index
.1.3.6.1.4.1.11.2.14.11.15.2.121.1.3.1.2,HPN-ICF-TRNG2-MIB::hpnicfTrangePeriodicSubIndex,Integer32,not-accessible,,current,,SubItem's index
.1.3.6.1.4.1.11.2.14.11.15.2.121.1.3.1.3,HPN-ICF-TRNG2-MIB::hpnicfTrangePeriodicDayOfWeek,BITS,read-create,,current,sunday(0):monday(1):tuesday(2):wednesday(3):thursday(4):friday(5):saturday(6),The day of week. This is a bit-map of possible conditions. The various bit positions are: |0 |sunday | |1 |monday | |2 |tuesday | |3 |wednesday | |4 |thursday | |5 |friday | |6 |saturday | 
.1.3.6.1.4.1.11.2.14.11.15.2.121.1.3.1.4,HPN-ICF-TRNG2-MIB::hpnicfTrangePeriodicStartTime,OCTET,read-create,,current,,Start point of this timerange,The format defined like 'hh:mm:0,0'.
.1.3.6.1.4.1.11.2.14.11.15.2.121.1.3.1.5,HPN-ICF-TRNG2-MIB::hpnicfTrangePeriodicEndTime,OCTET,read-create,,current,,End point of this timerange. The format definedlike 'hh:mm:0,0'.
.1.3.6.1.4.1.11.2.14.11.15.2.121.1.3.1.6,HPN-ICF-TRNG2-MIB::hpnicfTrangePeriodicRowStatus,INTEGER,read-create,,current,active(1):notInService(2):notReady(3):createAndGo(4):createAndWait(5):destroy(6),The status of this conceptual row, Now only realize CreateAndGo and Destroy and Active.
.1.3.6.1.4.1.11.2.14.11.15.2.122,HPN-ICF-OID-MIB::hpnicfDhcp4,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.2.122.1,HPN-ICF-DHCP4-MIB::hpnicfDhcpServer2ScalarObjects,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.2.122.1.1,HPN-ICF-DHCP4-MIB::hpnicfDhcpServer2ConfigGroup,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.2.122.1.1.1,HPN-ICF-DHCP4-MIB::hpnicfDhcpServer2Enabled,INTEGER,read-write,,current,true(1):false(2),If the value of this object is 'true', the DHCP service is enabled.
.1.3.6.1.4.1.11.2.14.11.15.2.122.1.1.2,HPN-ICF-DHCP4-MIB::hpnicfDhcpServer2AlwaysBroadcast,INTEGER,read-write,,current,true(1):false(2),When the value of this object is set to 'true', the DHCP server always uses broadcast to reply the client.
.1.3.6.1.4.1.11.2.14.11.15.2.122.1.1.3,HPN-ICF-DHCP4-MIB::hpnicfDhcpServer2IgnoreBootp,INTEGER,read-write,,current,true(1):false(2),When the value of this object is set to 'true', the DHCP server ignores BOOTP requests.
.1.3.6.1.4.1.11.2.14.11.15.2.122.1.1.4,HPN-ICF-DHCP4-MIB::hpnicfDhcpServer2BootpReplyRfc1048,INTEGER,read-write,,current,true(1):false(2),When the value of this object is set to 'true', the DHCP server use RFC 1048 format to reply to BOOTP requests.
.1.3.6.1.4.1.11.2.14.11.15.2.122.1.1.5,HPN-ICF-DHCP4-MIB::hpnicfDhcpServer2Opt82Enabled,INTEGER,read-write,,current,true(1):false(2),When the value of this object is set to 'true', the DHCP server handles DHCP option 82.
.1.3.6.1.4.1.11.2.14.11.15.2.122.1.1.6,HPN-ICF-DHCP4-MIB::hpnicfDhcpServer2PingNumber,Unsigned32,read-write,,current,,The number of ping packets sent out.
.1.3.6.1.4.1.11.2.14.11.15.2.122.1.1.7,HPN-ICF-DHCP4-MIB::hpnicfDhcpServer2PingTimeout,Unsigned32,read-write,,current,,The delay for the reply of a ping packet in milliseconds.
.1.3.6.1.4.1.11.2.14.11.15.2.122.1.2,HPN-ICF-DHCP4-MIB::hpnicfDhcpServer2StatGroup,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.2.122.1.2.1,HPN-ICF-DHCP4-MIB::hpnicfDhcpServer2BadNum,Counter64,read-only,,current,,The total number of the bad packets received.
.1.3.6.1.4.1.11.2.14.11.15.2.122.1.2.2,HPN-ICF-DHCP4-MIB::hpnicfDhcpServer2BootpRequestNum,Counter64,read-only,,current,,The total number of the BOOTREQUEST packets received.
.1.3.6.1.4.1.11.2.14.11.15.2.122.1.2.3,HPN-ICF-DHCP4-MIB::hpnicfDhcpServer2DiscoverNum,Counter64,read-only,,current,,The total number of the DHCPDISCOVER packets received from the DHCP clients.
.1.3.6.1.4.1.11.2.14.11.15.2.122.1.2.4,HPN-ICF-DHCP4-MIB::hpnicfDhcpServer2RequestNum,Counter64,read-only,,current,,The total number of the DHCPREQUEST packets received from the DHCP clients.
.1.3.6.1.4.1.11.2.14.11.15.2.122.1.2.5,HPN-ICF-DHCP4-MIB::hpnicfDhcpServer2DeclineNum,Counter64,read-only,,current,,The total number of the DHCPDECLINE packets received from the DHCP clients.
.1.3.6.1.4.1.11.2.14.11.15.2.122.1.2.6,HPN-ICF-DHCP4-MIB::hpnicfDhcpServer2ReleaseNum,Counter64,read-only,,current,,The total number of the DHCPRELEASE packets received from the DHCP clients.
.1.3.6.1.4.1.11.2.14.11.15.2.122.1.2.7,HPN-ICF-DHCP4-MIB::hpnicfDhcpServer2InformNum,Counter64,read-only,,current,,The total number of the DHCPINFORM packets received from the DHCP clients.
.1.3.6.1.4.1.11.2.14.11.15.2.122.1.2.8,HPN-ICF-DHCP4-MIB::hpnicfDhcpServer2BootpReplyNum,Counter64,read-only,,current,,The total number of the BOOTREPLY packets sent by the DHCP server.
.1.3.6.1.4.1.11.2.14.11.15.2.122.1.2.9,HPN-ICF-DHCP4-MIB::hpnicfDhcpServer2OfferNum,Counter64,read-only,,current,,The total number of the DHCPOFFER packets sent by the DHCP server.
.1.3.6.1.4.1.11.2.14.11.15.2.122.1.2.10,HPN-ICF-DHCP4-MIB::hpnicfDhcpServer2AckNum,Counter64,read-only,,current,,The total number of the DHCPACK packets sent by the DHCP server.
.1.3.6.1.4.1.11.2.14.11.15.2.122.1.2.11,HPN-ICF-DHCP4-MIB::hpnicfDhcpServer2NakNum,Counter64,read-only,,current,,The total number of the DHCPNAK packets sent by the DHCP server.
.1.3.6.1.4.1.11.2.14.11.15.2.122.1.2.12,HPN-ICF-DHCP4-MIB::hpnicfDhcpServer2TotalPoolUsage,Unsigned32,read-only,,current,,The percentage of IP addresses in use of all DHCP server pools.
.1.3.6.1.4.1.11.2.14.11.15.2.122.1.2.13,HPN-ICF-DHCP4-MIB::hpnicfDhcpServer2PoolNumber,Unsigned32,read-only,,current,,The total number of DHCP server pools.
.1.3.6.1.4.1.11.2.14.11.15.2.122.1.2.14,HPN-ICF-DHCP4-MIB::hpnicfDhcpServer2ConflictNum,Unsigned32,read-only,,current,,The total number of conflict IP in all DHCP server pools.
.1.3.6.1.4.1.11.2.14.11.15.2.122.1.2.15,HPN-ICF-DHCP4-MIB::hpnicfDhcpServer2AutoBindNum,Unsigned32,read-only,,current,,The total number of auto binding IP in DHCP server pools.
.1.3.6.1.4.1.11.2.14.11.15.2.122.1.2.16,HPN-ICF-DHCP4-MIB::hpnicfDhcpServer2ManualBindNum,Unsigned32,read-only,,current,,The total number of manual binding IP in DHCP server pools.
.1.3.6.1.4.1.11.2.14.11.15.2.122.1.2.17,HPN-ICF-DHCP4-MIB::hpnicfDhcpServer2ExpiredBindNum,Unsigned32,read-only,,current,,The total number of expired binding IP in DHCP server pools.
.1.3.6.1.4.1.11.2.14.11.15.2.122.2,HPN-ICF-DHCP4-MIB::hpnicfDhcpServer2Tables,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.2.122.2.1,HPN-ICF-DHCP4-MIB::hpnicfDhcpServer2PoolTable,,not-accessible,,current,,A table containing DHCP server pool configurations.
.1.3.6.1.4.1.11.2.14.11.15.2.122.2.1.1,HPN-ICF-DHCP4-MIB::hpnicfDhcpServer2PoolEntry,,not-accessible,hpnicfDhcpServer2PoolIndex,current,,An entry containing DHCP server pool configurations.
.1.3.6.1.4.1.11.2.14.11.15.2.122.2.1.1.1,HPN-ICF-DHCP4-MIB::hpnicfDhcpServer2PoolIndex,Unsigned32,not-accessible,,current,,DHCP server pool index.
.1.3.6.1.4.1.11.2.14.11.15.2.122.2.1.1.2,HPN-ICF-DHCP4-MIB::hpnicfDhcpServer2PoolName,OCTET,read-create,,current,,DHCP server pool name. Once this object is created, the value of this object cannot be modified.
.1.3.6.1.4.1.11.2.14.11.15.2.122.2.1.1.3,HPN-ICF-DHCP4-MIB::hpnicfDhcpServer2PoolVpnName,OCTET,read-create,,current,,Name of the VPN instance that the DHCP pool binds to. The value of a zero-length string means the public network. Once this object is created, the value of this object cannot be modified.
.1.3.6.1.4.1.11.2.14.11.15.2.122.2.1.1.4,HPN-ICF-DHCP4-MIB::hpnicfDhcpServer2PoolNetwork,OCTET,read-create,,current,,Network address of the primary subnet in a DHCP pool. If the value of this object is set to 0.0.0.0, hpnicfDhcpServer2PoolNetworkMask is set with 0.0.0.0 automatically.
.1.3.6.1.4.1.11.2.14.11.15.2.122.2.1.1.5,HPN-ICF-DHCP4-MIB::hpnicfDhcpServer2PoolNetworkMask,OCTET,read-create,,current,,Network mask of the primary subnet in a DHCP pool. The SET operation to this object ought to be with the SET of hpnicfDhcpServer2PoolNetwork together, and any SET operation alone to this object will be regarded as an invalid operation.
.1.3.6.1.4.1.11.2.14.11.15.2.122.2.1.1.6,HPN-ICF-DHCP4-MIB::hpnicfDhcpServer2PoolStartAddr,OCTET,read-create,,current,,Start IP of an address range of the DHCP pool. If the value of this object is set to 0.0.0.0, hpnicfDhcpServer2PoolEndAddr is set with 0.0.0.0 automatically. Otherwise hpnicfDhcpServer2PoolEndAddr must be set with an IP address NOT smaller than the value of this object.
.1.3.6.1.4.1.11.2.14.11.15.2.122.2.1.1.7,HPN-ICF-DHCP4-MIB::hpnicfDhcpServer2PoolEndAddr,OCTET,read-create,,current,,End IP of an address range of the DHCP pool, The SET operation to this object ought to be with the SET of hpnicfDhcpServer2PoolStartAddr together, and any SET operation alone to this object will be regarded as an invalid operation.
.1.3.6.1.4.1.11.2.14.11.15.2.122.2.1.1.8,HPN-ICF-DHCP4-MIB::hpnicfDhcpServer2PoolLeaseDay,Integer32,read-create,,current,,Number of days of the lease. The SET operation to this object ought to be with the SET of hpnicfDhcpServer2PoolLeaseHour, hpnicfDhcpServer2PoolLeaseMinute, hpnicfDhcpServer2PoolLeaseSecond together, and any SET operation alone to any of these objects will be regarded as an invalid operation. These objects cannot be set with 0 simultaneously.
.1.3.6.1.4.1.11.2.14.11.15.2.122.2.1.1.9,HPN-ICF-DHCP4-MIB::hpnicfDhcpServer2PoolLeaseHour,Integer32,read-create,,current,,Number of hours of the lease.
.1.3.6.1.4.1.11.2.14.11.15.2.122.2.1.1.10,HPN-ICF-DHCP4-MIB::hpnicfDhcpServer2PoolLeaseMinute,Integer32,read-create,,current,,Number of minutes of the lease.
.1.3.6.1.4.1.11.2.14.11.15.2.122.2.1.1.11,HPN-ICF-DHCP4-MIB::hpnicfDhcpServer2PoolLeaseSecond,Integer32,read-create,,current,,Number of seconds of the lease.
.1.3.6.1.4.1.11.2.14.11.15.2.122.2.1.1.12,HPN-ICF-DHCP4-MIB::hpnicfDhcpServer2PoolLeaseUnlimit,INTEGER,read-create,,current,true(1):false(2),A flag denoting whether the lease time of a DHCP pool is unlimited.
.1.3.6.1.4.1.11.2.14.11.15.2.122.2.1.1.13,HPN-ICF-DHCP4-MIB::hpnicfDhcpServer2PoolLeaseTime,TimeTicks,read-create,,current,,The lease time of a DHCP pool in number of timeticks. The value of this object cannot be set to 0 and must be set to 4294967295 or a multiple of 100. If the object is set with 4294967295, the lease time of a DHCP pool is unlimited.
.1.3.6.1.4.1.11.2.14.11.15.2.122.2.1.1.14,HPN-ICF-DHCP4-MIB::hpnicfDhcpServer2PoolDomainName,OCTET,read-create,,current,,Domain name for DHCP clients. If the object is set with a zero-length string, the configuration of the domain name is removed.
.1.3.6.1.4.1.11.2.14.11.15.2.122.2.1.1.15,HPN-ICF-DHCP4-MIB::hpnicfDhcpServer2PoolGatewayIP,OCTET,read-create,,current,,Gateway IP addresses for DHCP clients. IP addresses are space separated and the leading or trailing space will be trimmed. Since at most 8 gateway addresses can be configured for a pool, a string is defined to get or configure 8 IP at a time. If the object is set with a zero-length string, the configuration of the gateway address is removed.
.1.3.6.1.4.1.11.2.14.11.15.2.122.2.1.1.16,HPN-ICF-DHCP4-MIB::hpnicfDhcpServer2PoolDNSIP,OCTET,read-create,,current,,DNS server IP addresses for DHCP clients. IP addresses are space separated and the leading or trailing space will be trimmed. Since at most 8 DNS server addresses can be configured for a pool, a string is defined to get or configure 8 IP at a time. If the object is set with a zero-length string, the configuration of the DNS address is removed.
.1.3.6.1.4.1.11.2.14.11.15.2.122.2.1.1.17,HPN-ICF-DHCP4-MIB::hpnicfDhcpServer2PoolPrimaryDNSIP,OCTET,read-create,,current,,The primary DNS server IP address to be assigned to the client.
.1.3.6.1.4.1.11.2.14.11.15.2.122.2.1.1.18,HPN-ICF-DHCP4-MIB::hpnicfDhcpServer2PoolSecondDNSIP,OCTET,read-create,,current,,The secondary DNS server IP address to be assigned to the client.
.1.3.6.1.4.1.11.2.14.11.15.2.122.2.1.1.19,HPN-ICF-DHCP4-MIB::hpnicfDhcpServer2PoolNetbiosType,INTEGER,read-create,,current,null(0):bnode(1):pnode(2):mnode(4):hnode(8),NetBios node type for DHCP clients.
.1.3.6.1.4.1.11.2.14.11.15.2.122.2.1.1.20,HPN-ICF-DHCP4-MIB::hpnicfDhcpServer2PoolNbnsIP,OCTET,read-create,,current,,NetBios server IP addresses for DHCP clients. IP addresses are space separated and the leading or trailing space will be trimmed. Since at most 8 NetBios server addresses can be configured for a pool, a string is defined to get or configure 8 IP at a time. If the object is set with a zero-length string, the configuration of the NBNS address is removed.
.1.3.6.1.4.1.11.2.14.11.15.2.122.2.1.1.21,HPN-ICF-DHCP4-MIB::hpnicfDhcpServer2PoolBootFileName,OCTET,read-create,,current,,Boot file name for DHCP clients. If the object is set with a zero-length string, the configuration of the boot file name is removed.
.1.3.6.1.4.1.11.2.14.11.15.2.122.2.1.1.22,HPN-ICF-DHCP4-MIB::hpnicfDhcpServer2PoolBimsIP,OCTET,read-create,,current,,BIMS server IP address. If the object is set with 0.0.0.0, hpnicfDhcpServer2PoolBimsPort is set with 0 and hpnicfDhcpServer2PoolBimsKeyStr is set with a zero-length string automatically. Otherwise hpnicfDhcpServer2PoolBimsPort and hpnicfDhcpServer2PoolBimsKeyStr must be set at the same time while hpnicfDhcpServer2PoolBimsKeyStr must be set with a non-zero length string.
.1.3.6.1.4.1.11.2.14.11.15.2.122.2.1.1.23,HPN-ICF-DHCP4-MIB::hpnicfDhcpServer2PoolBimsPort,Unsigned32,read-create,,current,,BIMS server port number. The SET operation to this object ought to be with the SET operation of hpnicfDhcpServer2PoolBimsIP and hpnicfDhcpServer2PoolBimsKeyStr together, and any SET operation alone to this object will be regarded as an invalid operation.
.1.3.6.1.4.1.11.2.14.11.15.2.122.2.1.1.24,HPN-ICF-DHCP4-MIB::hpnicfDhcpServer2PoolBimsKeyStr,OCTET,read-create,,current,,BIMS server key string. The SET operation to this object ought to be with the SET of hpnicfDhcpServer2PoolBimsIP and hpnicfDhcpServer2PoolBimsPort together, and any SET operation alone to this object will be regarded as an invalid operation.
.1.3.6.1.4.1.11.2.14.11.15.2.122.2.1.1.25,HPN-ICF-DHCP4-MIB::hpnicfDhcpServer2PoolNextServer,OCTET,read-create,,current,,Next DHCP server IP address for DHCP clients. If the object is set with 0.0.0.0, the configuration of the next server address is removed.
.1.3.6.1.4.1.11.2.14.11.15.2.122.2.1.1.26,HPN-ICF-DHCP4-MIB::hpnicfDhcpServer2PoolTftpDomName,OCTET,read-create,,current,,TFTP server domain name for DHCP clients. If the object is set with a zero-length string, the configuration of the TFTP domain name is removed.
.1.3.6.1.4.1.11.2.14.11.15.2.122.2.1.1.27,HPN-ICF-DHCP4-MIB::hpnicfDhcpServer2PoolTftpIP,OCTET,read-create,,current,,TFTP server IP address for DHCP clients. If the object is set with 0.0.0.0, the configuration of the TFTP server address is removed.
.1.3.6.1.4.1.11.2.14.11.15.2.122.2.1.1.28,HPN-ICF-DHCP4-MIB::hpnicfDhcpServer2PoolVoiceAsIP,OCTET,read-create,,current,,Voice backup server IP address for DHCP clients. If the object is set with 0.0.0.0, the configuration of voice backup server IP address is removed.
.1.3.6.1.4.1.11.2.14.11.15.2.122.2.1.1.29,HPN-ICF-DHCP4-MIB::hpnicfDhcpServer2PoolVoiceFailIP,OCTET,read-create,,current,,Voice failover IP address for DHCP clients. If the object is set with 0.0.0.0, hpnicfDhcpServer2PoolVoiceFailStr is set with a zero-length string automatically. Otherwise hpnicfDhcpServer2PoolVoiceFailStr must be set with a non-zero length string at the same time.
.1.3.6.1.4.1.11.2.14.11.15.2.122.2.1.1.30,HPN-ICF-DHCP4-MIB::hpnicfDhcpServer2PoolVoiceFailStr,OCTET,read-create,,current,,Voice failover dialer string for DHCP clients. The characters in the string must be '0' ~ '9',or '*'. The SET operation to this object ought to be with the SET operation of hpnicfDhcpServer2PoolVoiceFailIP together, and any SET operation alone to this object will be regarded as an invalid operation.
.1.3.6.1.4.1.11.2.14.11.15.2.122.2.1.1.31,HPN-ICF-DHCP4-MIB::hpnicfDhcpServer2PoolVoiceNCPIP,OCTET,read-create,,current,,Voice network calling processing IP address for DHCP clients. If the object is set with 0.0.0.0, the configuration of voice network calling processing IP address is removed.
.1.3.6.1.4.1.11.2.14.11.15.2.122.2.1.1.32,HPN-ICF-DHCP4-MIB::hpnicfDhcpServer2PoolVoiceVlanId,Unsigned32,read-create,,current,,Voice VLAN ID for DHCP clients. If the value of this object is set to 65535, hpnicfDhcpServer2PoolVoiceVlanEnbl is set with 'false' automatically. Otherwise hpnicfDhcpServer2PoolVoiceVlanEnbl must also be set.
.1.3.6.1.4.1.11.2.14.11.15.2.122.2.1.1.33,HPN-ICF-DHCP4-MIB::hpnicfDhcpServer2PoolVoiceVlanEnbl,INTEGER,read-create,,current,true(1):false(2),Enable status of the specified voice VLAN for DHCP clients. The SET operation to this object ought to be with the SET operation of hpnicfDhcpServer2PoolVoiceVlanId together, and any SET operation alone to this object will be regarded as an invalid operation.
.1.3.6.1.4.1.11.2.14.11.15.2.122.2.1.1.34,HPN-ICF-DHCP4-MIB::hpnicfDhcpServer2PoolRowStatus,INTEGER,read-create,,current,active(1):notInService(2):notReady(3):createAndGo(4):createAndWait(5):destroy(6),RowStatus. Three actions are used: active, createAndGo, destroy.
.1.3.6.1.4.1.11.2.14.11.15.2.122.2.1.1.35,HPN-ICF-DHCP4-MIB::hpnicfDhcpServer2PoolVerifyClass,INTEGER,read-create,,current,true(1):false(2),Enable the user class verification. When the value of this object is set to 'true', the DHCP server processes packets from DHCP clients in the defined user classes. The user class verification does not apply to packets from DHCP clients with static bindings.
.1.3.6.1.4.1.11.2.14.11.15.2.122.2.2,HPN-ICF-DHCP4-MIB::hpnicfDhcpServer2IfApplyPoolTable,,not-accessible,,current,,A table for applying a DHCP pool on interfaces.
.1.3.6.1.4.1.11.2.14.11.15.2.122.2.2.1,HPN-ICF-DHCP4-MIB::hpnicfDhcpServer2IfApplyPoolEntry,,not-accessible,ifIndex,current,,An entry for applying a DHCP pool on the interface.
.1.3.6.1.4.1.11.2.14.11.15.2.122.2.2.1.1,HPN-ICF-DHCP4-MIB::hpnicfDhcpServer2IfApplyPoolName,OCTET,read-write,,current,,The name of the DHCP pool that apply to the interface. If the object is set with a zero-length string, the configuration will be deleted.
.1.3.6.1.4.1.11.2.14.11.15.2.122.2.3,HPN-ICF-DHCP4-MIB::hpnicfDhcpServer2PoolSecNwTable,,not-accessible,,current,,A table containing the secondary network configuration of DHCP pools.
.1.3.6.1.4.1.11.2.14.11.15.2.122.2.3.1,HPN-ICF-DHCP4-MIB::hpnicfDhcpServer2PoolSecNwEntry,,not-accessible,hpnicfDhcpServer2PoolIndex:hpnicfDhcpServer2PoolSecNw:hpnicfDhcpServer2PoolSecNwMask,current,,An entry containing the objects for configuring the secondary network for DHCP pools.
.1.3.6.1.4.1.11.2.14.11.15.2.122.2.3.1.1,HPN-ICF-DHCP4-MIB::hpnicfDhcpServer2PoolSecNw,OCTET,not-accessible,,current,,Network address of the secondary subnets in a DHCP pool.
.1.3.6.1.4.1.11.2.14.11.15.2.122.2.3.1.2,HPN-ICF-DHCP4-MIB::hpnicfDhcpServer2PoolSecNwMask,OCTET,not-accessible,,current,,Network mask of the secondary subnets in a DHCP pool.
.1.3.6.1.4.1.11.2.14.11.15.2.122.2.3.1.3,HPN-ICF-DHCP4-MIB::hpnicfDhcpServer2PoolSecNwGwIP,OCTET,read-create,,current,,Gateway IP addresses of the secondary subnets in a DHCP pool. IP addresses are space separated and the leading or trailing space will be trimmed. Since at most 8 gateway addresses can be configured for a secondary network, a string is defined to get or configure 8 IP at a time. If the object is set with a zero-length string, the configuration of the gateway address is removed.
.1.3.6.1.4.1.11.2.14.11.15.2.122.2.3.1.4,HPN-ICF-DHCP4-MIB::hpnicfDhcpServer2PoolSecNwStatus,INTEGER,read-create,,current,active(1):notInService(2):notReady(3):createAndGo(4):createAndWait(5):destroy(6),RowStatus. Three actions are used: active, createAndGo, destroy.
.1.3.6.1.4.1.11.2.14.11.15.2.122.2.4,HPN-ICF-DHCP4-MIB::hpnicfDhcpServer2PoolClassTable,,not-accessible,,current,,A table containing address range of the DHCP server pool for user classes.
.1.3.6.1.4.1.11.2.14.11.15.2.122.2.4.1,HPN-ICF-DHCP4-MIB::hpnicfDhcpServer2PoolClassEntry,,not-accessible,hpnicfDhcpServer2PoolIndex:hpnicfDhcpServer2PoolClassName,current,,An entry containing address range of DHCP pools for user classes.
.1.3.6.1.4.1.11.2.14.11.15.2.122.2.4.1.1,HPN-ICF-DHCP4-MIB::hpnicfDhcpServer2PoolClassName,OCTET,not-accessible,,current,,User class name.
.1.3.6.1.4.1.11.2.14.11.15.2.122.2.4.1.2,HPN-ICF-DHCP4-MIB::hpnicfDhcpServer2PoolClassStart,OCTET,read-create,,current,,Start address of an address range for a DHCP user class. The SET operation to this object ought to be with the SET operation of hpnicfDhcpServer2PoolClassEnd together, and any SET operation alone to this object will be regarded as an invalid operation.
.1.3.6.1.4.1.11.2.14.11.15.2.122.2.4.1.3,HPN-ICF-DHCP4-MIB::hpnicfDhcpServer2PoolClassEnd,OCTET,read-create,,current,,End address of an address range for a DHCP user class. The SET operation to this object ought to be with the SET of hpnicfDhcpServer2PoolClassStart together, and any SET operation alone to this object will be regarded as an invalid operation. This object must be set with an IP address NOT smaller than the value of hpnicfDhcpServer2PoolClassStart.
.1.3.6.1.4.1.11.2.14.11.15.2.122.2.4.1.4,HPN-ICF-DHCP4-MIB::hpnicfDhcpServer2PoolClassStatus,INTEGER,read-create,,current,active(1):notInService(2):notReady(3):createAndGo(4):createAndWait(5):destroy(6),RowStatus. Three actions are used: active, createAndGo, destroy. If the value of this object is set to 'createAndGo', hpnicfDhcpServer2PoolClassStart and hpnicfDhcpServer2PoolClassEnd must also be set.
.1.3.6.1.4.1.11.2.14.11.15.2.122.2.5,HPN-ICF-DHCP4-MIB::hpnicfDhcpServer2PoolStaticTable,,not-accessible,,current,,A table containing the static binding configurations in DHCP pools.
.1.3.6.1.4.1.11.2.14.11.15.2.122.2.5.1,HPN-ICF-DHCP4-MIB::hpnicfDhcpServer2PoolStaticEntry,,not-accessible,hpnicfDhcpServer2PoolIndex:hpnicfDhcpServer2PoolStaticIP,current,,An entry containing the objects for configuring the static binding in DHCP pools.
.1.3.6.1.4.1.11.2.14.11.15.2.122.2.5.1.1,HPN-ICF-DHCP4-MIB::hpnicfDhcpServer2PoolStaticIP,OCTET,not-accessible,,current,,Ip address of a static binding in a DHCP pool.
.1.3.6.1.4.1.11.2.14.11.15.2.122.2.5.1.2,HPN-ICF-DHCP4-MIB::hpnicfDhcpServer2PoolStaticMask,OCTET,read-create,,current,,Network mask of a static binding in a DHCP pool.
.1.3.6.1.4.1.11.2.14.11.15.2.122.2.5.1.3,HPN-ICF-DHCP4-MIB::hpnicfDhcpServer2PoolStaticCID,OCTET,read-create,,current,,Client identifier of a DHCP client that the IP address binds to. The structure of the OCTET STRING is H-H-H... while H indicates 4 hexadecimal characters except that the last H indicates 2 or 4 hexadecimal characters.
.1.3.6.1.4.1.11.2.14.11.15.2.122.2.5.1.4,HPN-ICF-DHCP4-MIB::hpnicfDhcpServer2PoolStaticHAddr,OCTET,read-create,,current,,Hardware address of a DHCP client that the IP address binds to. The structure of the OCTET STRING is H-H-H... while H indicates 4 hexadecimal characters except that the last H indicates 2 or 4 hexadecimal characters.
.1.3.6.1.4.1.11.2.14.11.15.2.122.2.5.1.5,HPN-ICF-DHCP4-MIB::hpnicfDhcpServer2PoolStaticHType,INTEGER,read-create,,current,default(1):ethernet(2):tokenRing(3),Hardware type of a DHCP client that the IP address binds to. The SET operation to this object ought to be with the SET operation of hpnicfDhcpServer2PoolStaticHAddr, and any SET operation alone to this object will be regarded as an invalid operation. 'default' indicates that the hardware type is unknown. If the value of hpnicfDhcpServer2PoolStaticCID is set to a non-zero length string, the object is set with 'default' automatically. Otherwise it cannot be set with 'default'. 'ethernet' indicates that the hardware type is ethernet. If the value of hpnicfDhcpServer2PoolStaticHAddr is set with a non-zero length string, the default value of this object is 'ethernet'. 'tokenRing' indicates that the hardware type is token-ring.
.1.3.6.1.4.1.11.2.14.11.15.2.122.2.5.1.6,HPN-ICF-DHCP4-MIB::hpnicfDhcpServer2PoolStaticStatus,INTEGER,read-create,,current,active(1):notInService(2):notReady(3):createAndGo(4):createAndWait(5):destroy(6),RowStatus. Three actions are used: active, createAndGo, destroy. If the value of this object is set to 'createAndGo', hpnicfDhcpServer2PoolStaticCID or (hpnicfDhcpServer2PoolStaticHardAddr and hpnicfDhcpServer2PoolStaticHardType) must also be set.
.1.3.6.1.4.1.11.2.14.11.15.2.122.2.6,HPN-ICF-DHCP4-MIB::hpnicfDhcpServer2PoolOptionTable,,not-accessible,,current,,A table for configuring user-defined options for DHCP pools.
.1.3.6.1.4.1.11.2.14.11.15.2.122.2.6.1,HPN-ICF-DHCP4-MIB::hpnicfDhcpServer2PoolOptionEntry,,not-accessible,hpnicfDhcpServer2PoolIndex:hpnicfDhcpServer2PoolOptCode,current,,An entry containing the objects for configuring user-defined options for DHCP pools.
.1.3.6.1.4.1.11.2.14.11.15.2.122.2.6.1.1,HPN-ICF-DHCP4-MIB::hpnicfDhcpServer2PoolOptCode,Integer32,not-accessible,,current,,Option code.
.1.3.6.1.4.1.11.2.14.11.15.2.122.2.6.1.2,HPN-ICF-DHCP4-MIB::hpnicfDhcpServer2PoolOptType,INTEGER,read-create,,current,ascii(1):hex(2):ip(3),Option type. 'ascii' means using the ascii string that is defined by hpnicfDhcpServer2PoolOptAscii to fill in the option. 'hex' means using the hex string that is defined by hpnicfDhcpServer2PoolOptHexStr to fill in the option. 'ip' means using the IP string that is defined by hpnicfDhcpServer2PoolOptIPStr to fill in the option.
.1.3.6.1.4.1.11.2.14.11.15.2.122.2.6.1.3,HPN-ICF-DHCP4-MIB::hpnicfDhcpServer2PoolOptAscii,OCTET,read-create,,current,,Ascii string of an option. If hpnicfDhcpServer2PoolOptType is set with 'ascii', this object must be set with a non-zero length string.
.1.3.6.1.4.1.11.2.14.11.15.2.122.2.6.1.4,HPN-ICF-DHCP4-MIB::hpnicfDhcpServer2PoolOptHexStr,OCTET,read-create,,current,,Hex string of an option. The length of the string must be even. If hpnicfDhcpServer2PoolOptType is set with 'hex', this object must be set with a non-zero length string.
.1.3.6.1.4.1.11.2.14.11.15.2.122.2.6.1.5,HPN-ICF-DHCP4-MIB::hpnicfDhcpServer2PoolOptIPStr,OCTET,read-create,,current,,IP string of an option. IP addresses are space separated and the leading or trailing space will be trimmed. 1 to 8 IP addresses can be configured simultaneously. If hpnicfDhcpServer2PoolOptType is set with 'ip', this object must be set with a non-zero length string that must contain at least one IP address.
.1.3.6.1.4.1.11.2.14.11.15.2.122.2.6.1.6,HPN-ICF-DHCP4-MIB::hpnicfDhcpServer2PoolOptRowStatus,INTEGER,read-create,,current,active(1):notInService(2):notReady(3):createAndGo(4):createAndWait(5):destroy(6),RowStatus. Three actions are used: active, createAndGo, destroy. If the value of this object is set to 'createAndGo', hpnicfDhcpServer2PoolOptType must also be set.
.1.3.6.1.4.1.11.2.14.11.15.2.122.2.7,HPN-ICF-DHCP4-MIB::hpnicfDhcpServer2PoolForbidTable,,not-accessible,,current,,A table for configuring forbidden IP for a DHCP server pool.
.1.3.6.1.4.1.11.2.14.11.15.2.122.2.7.1,HPN-ICF-DHCP4-MIB::hpnicfDhcpServer2PoolForbidEntry,,not-accessible,hpnicfDhcpServer2PoolIndex:hpnicfDhcpServer2PoolForbidIP,current,,An entry for configuring forbidden IP for a DHCP server pool.
.1.3.6.1.4.1.11.2.14.11.15.2.122.2.7.1.1,HPN-ICF-DHCP4-MIB::hpnicfDhcpServer2PoolForbidIP,OCTET,not-accessible,,current,,Forbidden IP of the DHCP pool.
.1.3.6.1.4.1.11.2.14.11.15.2.122.2.7.1.2,HPN-ICF-DHCP4-MIB::hpnicfDhcpServer2PoolForbidStatus,INTEGER,read-create,,current,active(1):notInService(2):notReady(3):createAndGo(4):createAndWait(5):destroy(6),RowStatus. Three actions are used: active, createAndGo, destroy.
.1.3.6.1.4.1.11.2.14.11.15.2.122.2.8,HPN-ICF-DHCP4-MIB::hpnicfDhcpServer2ClassTable,,not-accessible,,current,,A table for configuring user class to DHCP server.
.1.3.6.1.4.1.11.2.14.11.15.2.122.2.8.1,HPN-ICF-DHCP4-MIB::hpnicfDhcpServer2ClassEntry,,not-accessible,hpnicfDhcpServer2ClassName,current,,An entry for configuring user class to DHCP server.
.1.3.6.1.4.1.11.2.14.11.15.2.122.2.8.1.1,HPN-ICF-DHCP4-MIB::hpnicfDhcpServer2ClassName,OCTET,not-accessible,,current,,DHCP user class name.
.1.3.6.1.4.1.11.2.14.11.15.2.122.2.8.1.2,HPN-ICF-DHCP4-MIB::hpnicfDhcpServer2ClassRowStatus,INTEGER,read-create,,current,active(1):notInService(2):notReady(3):createAndGo(4):createAndWait(5):destroy(6),RowStatus. Three actions are used: active, createAndGo, destroy.
.1.3.6.1.4.1.11.2.14.11.15.2.122.2.9,HPN-ICF-DHCP4-MIB::hpnicfDhcpServer2RuleTable,,not-accessible,,current,,A table for configuring option rules used to match DHCP users.
.1.3.6.1.4.1.11.2.14.11.15.2.122.2.9.1,HPN-ICF-DHCP4-MIB::hpnicfDhcpServer2RuleEntry,,not-accessible,hpnicfDhcpServer2ClassName:hpnicfDhcpServer2RuleNumber,current,,An entry for configuring option rules used to match DHCP users.
.1.3.6.1.4.1.11.2.14.11.15.2.122.2.9.1.1,HPN-ICF-DHCP4-MIB::hpnicfDhcpServer2RuleNumber,Integer32,not-accessible,,current,,Rule number.
.1.3.6.1.4.1.11.2.14.11.15.2.122.2.9.1.2,HPN-ICF-DHCP4-MIB::hpnicfDhcpServer2RuleOptCode,Integer32,read-create,,current,,Option code.
.1.3.6.1.4.1.11.2.14.11.15.2.122.2.9.1.3,HPN-ICF-DHCP4-MIB::hpnicfDhcpServer2RuleOptHexStr,OCTET,read-create,,current,,Hex string of an option. The length of the string must be even.
.1.3.6.1.4.1.11.2.14.11.15.2.122.2.9.1.4,HPN-ICF-DHCP4-MIB::hpnicfDhcpServer2RuleOptMask,OCTET,read-create,,current,,The mask used to match options. The length of this object must be same with that of hpnicfDhcpServer2RuleOptHexStr. The SET operation of this object must be with the SET operation of hpnicfDhcpServer2RuleOptHexStr.
.1.3.6.1.4.1.11.2.14.11.15.2.122.2.9.1.5,HPN-ICF-DHCP4-MIB::hpnicfDhcpServer2RuleOptOffset,Integer32,read-create,,current,,The option offset used to match users. The SET operation of this object must be with the SET operation of hpnicfDhcpServer2RuleOptHexStr, hpnicfDhcpServer2RuleOptLength.
.1.3.6.1.4.1.11.2.14.11.15.2.122.2.9.1.6,HPN-ICF-DHCP4-MIB::hpnicfDhcpServer2RuleOptLength,Integer32,read-create,,current,,The option length used to match user options. The SET operation of this object must be with the SET operation of hpnicfDhcpServer2RuleOptOffset.
.1.3.6.1.4.1.11.2.14.11.15.2.122.2.9.1.7,HPN-ICF-DHCP4-MIB::hpnicfDhcpServer2RuleRowStatus,INTEGER,read-create,,current,active(1):notInService(2):notReady(3):createAndGo(4):createAndWait(5):destroy(6),RowStatus. Three actions are used: active, createAndGo, destroy. If the value of this object is set to 'createAndGo', hpnicfDhcpServer2RuleOptCode must also be set.
.1.3.6.1.4.1.11.2.14.11.15.2.122.2.10,HPN-ICF-DHCP4-MIB::hpnicfDhcpServer2ForbidTable,,not-accessible,,current,,A table for configuring forbidden IP range to DHCP server.
.1.3.6.1.4.1.11.2.14.11.15.2.122.2.10.1,HPN-ICF-DHCP4-MIB::hpnicfDhcpServer2ForbidEntry,,not-accessible,hpnicfDhcpServer2ForbidVpnName:hpnicfDhcpServer2ForbidStart:hpnicfDhcpServer2ForbidEnd,current,,An entry for configuring forbidden IP range to DHCP server.
.1.3.6.1.4.1.11.2.14.11.15.2.122.2.10.1.1,HPN-ICF-DHCP4-MIB::hpnicfDhcpServer2ForbidVpnName,OCTET,not-accessible,,current,,Name of the VPN instance that the forbidden IP range binds to. If the value of this object is 0x1, the network that the forbidden IP range belongs to is the public network.
.1.3.6.1.4.1.11.2.14.11.15.2.122.2.10.1.2,HPN-ICF-DHCP4-MIB::hpnicfDhcpServer2ForbidStart,OCTET,not-accessible,,current,,Start IP of forbidden IP range.
.1.3.6.1.4.1.11.2.14.11.15.2.122.2.10.1.3,HPN-ICF-DHCP4-MIB::hpnicfDhcpServer2ForbidEnd,OCTET,not-accessible,,current,,End IP of forbidden IP range.
.1.3.6.1.4.1.11.2.14.11.15.2.122.2.10.1.4,HPN-ICF-DHCP4-MIB::hpnicfDhcpServer2ForbidRowStatus,INTEGER,read-create,,current,active(1):notInService(2):notReady(3):createAndGo(4):createAndWait(5):destroy(6),RowStatus. Three actions are used: active, createAndGo, destroy.
.1.3.6.1.4.1.11.2.14.11.15.2.122.2.11,HPN-ICF-DHCP4-MIB::hpnicfDhcpServer2FreeTable,,not-accessible,,current,,A table for displaying free IP range for DHCP server.
.1.3.6.1.4.1.11.2.14.11.15.2.122.2.11.1,HPN-ICF-DHCP4-MIB::hpnicfDhcpServer2FreeEntry,,not-accessible,hpnicfDhcpServer2PoolIndex:hpnicfDhcpServer2FreeStart,current,,An entry for displaying free IP range for DHCP server.
.1.3.6.1.4.1.11.2.14.11.15.2.122.2.11.1.1,HPN-ICF-DHCP4-MIB::hpnicfDhcpServer2FreeStart,OCTET,not-accessible,,current,,Start IP of free IP range.
.1.3.6.1.4.1.11.2.14.11.15.2.122.2.11.1.2,HPN-ICF-DHCP4-MIB::hpnicfDhcpServer2FreeEnd,OCTET,read-only,,current,,End IP of free IP range.
.1.3.6.1.4.1.11.2.14.11.15.2.122.2.12,HPN-ICF-DHCP4-MIB::hpnicfDhcpServer2ConflictTable,,not-accessible,,current,,A table for displaying the information of conflict IP for DHCP server.
.1.3.6.1.4.1.11.2.14.11.15.2.122.2.12.1,HPN-ICF-DHCP4-MIB::hpnicfDhcpServer2ConflictEntry,,not-accessible,hpnicfDhcpServer2PoolIndex:hpnicfDhcpServer2ConflictIP,current,,An entry for displaying the information of conflict IP for DHCP server.
.1.3.6.1.4.1.11.2.14.11.15.2.122.2.12.1.1,HPN-ICF-DHCP4-MIB::hpnicfDhcpServer2ConflictIP,OCTET,not-accessible,,current,,Conflict IP.
.1.3.6.1.4.1.11.2.14.11.15.2.122.2.12.1.2,HPN-ICF-DHCP4-MIB::hpnicfDhcpServer2ConflictType,INTEGER,read-only,,current,detectByServer(1):detectByClient(2),Type of the detection of conflict IP. 'detectByServer' denotes that the conflict is detected by DHCP server. 'detectByClient' denotes that the conflict is detected by DHCP client.
.1.3.6.1.4.1.11.2.14.11.15.2.122.2.12.1.3,HPN-ICF-DHCP4-MIB::hpnicfDhcpServer2ConflictTime,OCTET,read-only,,current,,Time when the conflict is detected. The structure of the OCTET STRING is month/day/year hour:munite:second (MM/DD/YYYY hh:mm:ss).
.1.3.6.1.4.1.11.2.14.11.15.2.122.2.12.1.4,HPN-ICF-DHCP4-MIB::hpnicfDhcpServer2ConflictRowStatus,INTEGER,read-create,,current,active(1):notInService(2):notReady(3):createAndGo(4):createAndWait(5):destroy(6),RowStatus. Only destroy action is allow to use.
.1.3.6.1.4.1.11.2.14.11.15.2.122.2.13,HPN-ICF-DHCP4-MIB::hpnicfDhcpServer2ExpiredTable,,not-accessible,,current,,A table for displaying the information of expired IP for DHCP Server pools. 
.1.3.6.1.4.1.11.2.14.11.15.2.122.2.13.1,HPN-ICF-DHCP4-MIB::hpnicfDhcpServer2ExpiredEntry,,not-accessible,hpnicfDhcpServer2PoolIndex:hpnicfDhcpServer2ExpiredIP,current,,An entry of objects for displaying information of expired IP for DHCP server pools.
.1.3.6.1.4.1.11.2.14.11.15.2.122.2.13.1.1,HPN-ICF-DHCP4-MIB::hpnicfDhcpServer2ExpiredIP,OCTET,not-accessible,,current,,Expired IP address.
.1.3.6.1.4.1.11.2.14.11.15.2.122.2.13.1.2,HPN-ICF-DHCP4-MIB::hpnicfDhcpServer2ExpiredClientId,OCTET,read-only,,current,,Client identifier or hardware address.
.1.3.6.1.4.1.11.2.14.11.15.2.122.2.13.1.3,HPN-ICF-DHCP4-MIB::hpnicfDhcpServer2ExpiredTime,OCTET,read-only,,current,,Expired time. The structure of the OCTET STRING is month/day/year hour:munite:second (MM/DD/YYYY hh:mm:ss).
.1.3.6.1.4.1.11.2.14.11.15.2.122.2.13.1.4,HPN-ICF-DHCP4-MIB::hpnicfDhcpServer2ExpiredRowStatus,INTEGER,read-create,,current,active(1):notInService(2):notReady(3):createAndGo(4):createAndWait(5):destroy(6),RowStatus. Only destroy action is allow to use.
.1.3.6.1.4.1.11.2.14.11.15.2.122.2.14,HPN-ICF-DHCP4-MIB::hpnicfDhcpServer2IPInUseTable,,not-accessible,,current,,A table for displaying the information of IP in use for DHCP Server pools. 
.1.3.6.1.4.1.11.2.14.11.15.2.122.2.14.1,HPN-ICF-DHCP4-MIB::hpnicfDhcpServer2IPInUseEntry,,not-accessible,hpnicfDhcpServer2PoolIndex:hpnicfDhcpServer2IPInUseIP,current,,An entry of objects for displaying information of IP in use for DHCP server pools.
.1.3.6.1.4.1.11.2.14.11.15.2.122.2.14.1.1,HPN-ICF-DHCP4-MIB::hpnicfDhcpServer2IPInUseIP,OCTET,not-accessible,,current,,Ip address in use.
.1.3.6.1.4.1.11.2.14.11.15.2.122.2.14.1.2,HPN-ICF-DHCP4-MIB::hpnicfDhcpServer2IPInUseClientId,OCTET,read-only,,current,,Client identifier.
.1.3.6.1.4.1.11.2.14.11.15.2.122.2.14.1.3,HPN-ICF-DHCP4-MIB::hpnicfDhcpServer2IPInUseHardAddr,OCTET,read-only,,current,,Hardware address.
.1.3.6.1.4.1.11.2.14.11.15.2.122.2.14.1.4,HPN-ICF-DHCP4-MIB::hpnicfDhcpServer2IPInUseHardType,INTEGER,read-only,,current,default(1):ethernet(2):tokenRing(3),Hardware address type.
.1.3.6.1.4.1.11.2.14.11.15.2.122.2.14.1.5,HPN-ICF-DHCP4-MIB::hpnicfDhcpServer2IPInUseVlanId,Unsigned32,read-only,,current,,User's VLAN ID. 65535 means that a client doesn't have VLAN ID or have an invalid VLAN ID.
.1.3.6.1.4.1.11.2.14.11.15.2.122.2.14.1.6,HPN-ICF-DHCP4-MIB::hpnicfDhcpServer2IPInUseEndLease,OCTET,read-only,,current,,End time of lease. The structure of the OCTET STRING is month/day/year hour:munite:second (MM/DD/YYYY hh:mm:ss).
.1.3.6.1.4.1.11.2.14.11.15.2.122.2.14.1.7,HPN-ICF-DHCP4-MIB::hpnicfDhcpServer2IPInUseType,INTEGER,read-only,,current,staticUnallocated(1):staticOffered(2):staticCommitted(3):autoOffered(4):autoCommitted(5),Type of binding.
.1.3.6.1.4.1.11.2.14.11.15.2.122.2.14.1.8,HPN-ICF-DHCP4-MIB::hpnicfDhcpServer2IPInUseIfIndex,Integer32,read-only,,current,,Interface index information. If the value of this object is zero, the interface is unknown.
.1.3.6.1.4.1.11.2.14.11.15.2.122.2.14.1.9,HPN-ICF-DHCP4-MIB::hpnicfDhcpServer2IPInUseRowStatus,INTEGER,read-create,,current,active(1):notInService(2):notReady(3):createAndGo(4):createAndWait(5):destroy(6),RowStatus. Only destroy action is allow to use.
.1.3.6.1.4.1.11.2.14.11.15.2.122.2.15,HPN-ICF-DHCP4-MIB::hpnicfDhcpServer2DefOptGrpTable,,not-accessible,,current,,A table containing option group of the DHCP server pool for user classes.
.1.3.6.1.4.1.11.2.14.11.15.2.122.2.15.1,HPN-ICF-DHCP4-MIB::hpnicfDhcpServer2DefOptGrpEntry,,not-accessible,hpnicfDhcpServer2PoolIndex:hpnicfDhcpServer2DefOptGrpClass,current,,An entry containing option group of DHCP pools for user classes.
.1.3.6.1.4.1.11.2.14.11.15.2.122.2.15.1.1,HPN-ICF-DHCP4-MIB::hpnicfDhcpServer2DefOptGrpClass,OCTET,not-accessible,,current,,User class name.
.1.3.6.1.4.1.11.2.14.11.15.2.122.2.15.1.2,HPN-ICF-DHCP4-MIB::hpnicfDhcpServer2DefOptGrpId,Integer32,read-create,,current,,The option group ID.
.1.3.6.1.4.1.11.2.14.11.15.2.122.2.15.1.3,HPN-ICF-DHCP4-MIB::hpnicfDhcpServer2DefOptGrpStatus,INTEGER,read-create,,current,active(1):notInService(2):notReady(3):createAndGo(4):createAndWait(5):destroy(6),RowStatus. Three actions are used: active, createAndGo, destroy. If the value of this object is set to 'createAndGo', hpnicfDhcpServer2DefOptGrpId must also be set.
.1.3.6.1.4.1.11.2.14.11.15.2.122.2.16,HPN-ICF-DHCP4-MIB::hpnicfDhcpServer2ValidClassTable,,not-accessible,,current,,A table containing valid user classes for DHCP server pool.
.1.3.6.1.4.1.11.2.14.11.15.2.122.2.16.1,HPN-ICF-DHCP4-MIB::hpnicfDhcpServer2ValidClassEntry,,not-accessible,hpnicfDhcpServer2PoolIndex:hpnicfDhcpServer2ValidClassName,current,,An entry containing valid user classes for DHCP server pool.
.1.3.6.1.4.1.11.2.14.11.15.2.122.2.16.1.1,HPN-ICF-DHCP4-MIB::hpnicfDhcpServer2ValidClassName,OCTET,not-accessible,,current,,User class name.
.1.3.6.1.4.1.11.2.14.11.15.2.122.2.16.1.2,HPN-ICF-DHCP4-MIB::hpnicfDhcpServer2ValidClassStatus,INTEGER,read-create,,current,active(1):notInService(2):notReady(3):createAndGo(4):createAndWait(5):destroy(6),RowStatus. Three actions are used: active, createAndGo, destroy.
.1.3.6.1.4.1.11.2.14.11.15.2.122.2.17,HPN-ICF-DHCP4-MIB::hpnicfDhcpServer2RuleHwAddrTable,,not-accessible,,current,,A table for configuring hardware address rules used to match DHCP users.
.1.3.6.1.4.1.11.2.14.11.15.2.122.2.17.1,HPN-ICF-DHCP4-MIB::hpnicfDhcpServer2RuleHwAddrEntry,,not-accessible,hpnicfDhcpServer2ClassName:hpnicfDhcpServer2RuleHwAddrNumber,current,,An entry for configuring hardware address rules used to match DHCP users.
.1.3.6.1.4.1.11.2.14.11.15.2.122.2.17.1.1,HPN-ICF-DHCP4-MIB::hpnicfDhcpServer2RuleHwAddrNumber,Integer32,not-accessible,,current,,Rule number.
.1.3.6.1.4.1.11.2.14.11.15.2.122.2.17.1.2,HPN-ICF-DHCP4-MIB::hpnicfDhcpServer2RuleHwAddress,OCTET,read-create,,current,,Hardware address for a rule. The structure of the OCTET STRING is H-H-H... while H indicates 4 hexadecimal characters except that the last H indicates 2 or 4 hexadecimal characters. The SET operation to this object ought to be with the SET operation of hpnicfDhcpServer2RuleHwAddrMask together, and any SET operation alone to this object will be regarded as an invalid operation.
.1.3.6.1.4.1.11.2.14.11.15.2.122.2.17.1.3,HPN-ICF-DHCP4-MIB::hpnicfDhcpServer2RuleHwAddrMask,OCTET,read-create,,current,,Mask of hardware address for a rule. The structure of the OCTET STRING is the same with hpnicfDhcpServer2RuleHwAddress. The SET operation to this object ought to be with the SET operation of hpnicfDhcpServer2RuleHwAddress together, and any SET operation alone to this object will be regarded as an invalid operation.
.1.3.6.1.4.1.11.2.14.11.15.2.122.2.17.1.4,HPN-ICF-DHCP4-MIB::hpnicfDhcpServer2RuleHwAddrType,Integer32,read-create,,current,,Hardware type for a rule. The codes of all hardware types see ARP section in RFC 1700. The SET operation alone to this object will be regarded as an invalid operation.
.1.3.6.1.4.1.11.2.14.11.15.2.122.2.17.1.5,HPN-ICF-DHCP4-MIB::hpnicfDhcpServer2RuleHwAddrStatus,INTEGER,read-create,,current,active(1):notInService(2):notReady(3):createAndGo(4):createAndWait(5):destroy(6),RowStatus. Three actions are used: active, createAndGo, destroy. If the value of this object is set to 'createAndGo', hpnicfDhcpServer2RuleHwAddrAddress and hpnicfDhcpServer2RuleHwAddrMask must also be set.
.1.3.6.1.4.1.11.2.14.11.15.2.122.2.18,HPN-ICF-DHCP4-MIB::hpnicfDhcpServer2OptionGroupTable,,not-accessible,,current,,A table for creating DHCP server option groups.
.1.3.6.1.4.1.11.2.14.11.15.2.122.2.18.1,HPN-ICF-DHCP4-MIB::hpnicfDhcpServer2OptionGroupEntry,,not-accessible,hpnicfDhcpServer2OptionGroupId,current,,An entry containing objects for creating or deleting an option group.
.1.3.6.1.4.1.11.2.14.11.15.2.122.2.18.1.1,HPN-ICF-DHCP4-MIB::hpnicfDhcpServer2OptionGroupId,Integer32,not-accessible,,current,,The option group ID.
.1.3.6.1.4.1.11.2.14.11.15.2.122.2.18.1.2,HPN-ICF-DHCP4-MIB::hpnicfDhcpServer2OptionGroupStatus,INTEGER,read-create,,current,active(1):notInService(2):notReady(3):createAndGo(4):createAndWait(5):destroy(6),RowStatus. Three actions are used: active, createAndGo, destroy.
.1.3.6.1.4.1.11.2.14.11.15.2.122.2.19,HPN-ICF-DHCP4-MIB::hpnicfDhcpServer2OptionTable,,not-accessible,,current,,A table for configuring options in an option group.
.1.3.6.1.4.1.11.2.14.11.15.2.122.2.19.1,HPN-ICF-DHCP4-MIB::hpnicfDhcpServer2OptionEntry,,not-accessible,hpnicfDhcpServer2OptionGroupId:hpnicfDhcpServer2OptionCode,current,,An entry containing objects for configuring an option in an option group.
.1.3.6.1.4.1.11.2.14.11.15.2.122.2.19.1.1,HPN-ICF-DHCP4-MIB::hpnicfDhcpServer2OptionCode,Integer32,not-accessible,,current,,Option code.
.1.3.6.1.4.1.11.2.14.11.15.2.122.2.19.1.2,HPN-ICF-DHCP4-MIB::hpnicfDhcpServer2OptionType,INTEGER,read-create,,current,ascii(1):hex(2):ip(3),Option type. 'ascii' means using the ascii string that is defined by hpnicfDhcpServer2OptionAscii to fill in the option. 'hex' means using the hex string that is defined by hpnicfDhcpServer2OptionHexStr to fill in the option. 'ip' means using the IP string that is defined by hpnicfDhcpServer2OptionIPStr to fill in the option.
.1.3.6.1.4.1.11.2.14.11.15.2.122.2.19.1.3,HPN-ICF-DHCP4-MIB::hpnicfDhcpServer2OptionAscii,OCTET,read-create,,current,,Ascii string of an option. If hpnicfDhcpServer2OptionType is set with 'ascii', this object must be set with a non-zero length string.
.1.3.6.1.4.1.11.2.14.11.15.2.122.2.19.1.4,HPN-ICF-DHCP4-MIB::hpnicfDhcpServer2OptionHexStr,OCTET,read-create,,current,,Hex string of an option. The length of the string must be even. If hpnicfDhcpServer2OptionType is set with 'hex', this object must be set with a non-zero length string.
.1.3.6.1.4.1.11.2.14.11.15.2.122.2.19.1.5,HPN-ICF-DHCP4-MIB::hpnicfDhcpServer2OptionIPStr,OCTET,read-create,,current,,IP string of an option. IP addresses are space separated and the leading or trailing space will be trimmed. 1 to 8 IP addresses can be configured simultaneously. If hpnicfDhcpServer2OptionType is set with 'ip', this object must be set with a non-zero length string that must contain at least one IP address.
.1.3.6.1.4.1.11.2.14.11.15.2.122.2.19.1.6,HPN-ICF-DHCP4-MIB::hpnicfDhcpServer2OptionRowStatus,INTEGER,read-create,,current,active(1):notInService(2):notReady(3):createAndGo(4):createAndWait(5):destroy(6),RowStatus. Three actions are used: active, createAndGo, destroy. If the value of this object is set to 'createAndGo', hpnicfDhcpServer2OptionType must also be set.
.1.3.6.1.4.1.11.2.14.11.15.2.122.3,HPN-ICF-DHCP4-MIB::hpnicfDhcpRelay2ScalarObjects,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.2.122.3.1,HPN-ICF-DHCP4-MIB::hpnicfDhcpRelay2ConfigGroup,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.2.122.3.1.1,HPN-ICF-DHCP4-MIB::hpnicfDhcpRelay2UserInfoRecord,INTEGER,read-write,,current,true(1):false(2),If the value is 'true', user information will be recorded.
.1.3.6.1.4.1.11.2.14.11.15.2.122.3.1.2,HPN-ICF-DHCP4-MIB::hpnicfDhcpRelay2UserInfoRefresh,INTEGER,read-write,,current,true(1):false(2),If the value is 'true', user information will be refreshed on timer.
.1.3.6.1.4.1.11.2.14.11.15.2.122.3.1.3,HPN-ICF-DHCP4-MIB::hpnicfDhcpRelay2UserInfoFlushTime,Unsigned32,read-write,,current,,User information refresh interval in seconds. If the value of the object is set to 0, the interval is calculated automatically by the number of user information entries.
.1.3.6.1.4.1.11.2.14.11.15.2.122.3.1.4,HPN-ICF-DHCP4-MIB::hpnicfDhcpRelay2ReleaseAddr,OCTET,read-write,,current,,User address to be released. The structure of the OCTET STRING is IP address:VPN name. If the VPN instance name is NOT specified, the IP address is in public network.
.1.3.6.1.4.1.11.2.14.11.15.2.122.3.2,HPN-ICF-DHCP4-MIB::hpnicfDhcpRelay2StatisticsGroup,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.2.122.3.2.1,HPN-ICF-DHCP4-MIB::hpnicfDhcpRelay2RxClientNum,Counter64,read-only,,current,,The total number of the packets received from DHCP clients by DHCP relay.
.1.3.6.1.4.1.11.2.14.11.15.2.122.3.2.2,HPN-ICF-DHCP4-MIB::hpnicfDhcpRelay2TxClientNum,Counter64,read-only,,current,,The total number of the packets transmitted to DHCP clients by DHCP relay.
.1.3.6.1.4.1.11.2.14.11.15.2.122.3.2.3,HPN-ICF-DHCP4-MIB::hpnicfDhcpRelay2RxServerNum,Counter64,read-only,,current,,The total number of the packets received from DHCP Servers by DHCP relay.
.1.3.6.1.4.1.11.2.14.11.15.2.122.3.2.4,HPN-ICF-DHCP4-MIB::hpnicfDhcpRelay2TxServerNum,Counter64,read-only,,current,,The total number of the packets transmitted to DHCP Servers by DHCP relay.
.1.3.6.1.4.1.11.2.14.11.15.2.122.3.2.5,HPN-ICF-DHCP4-MIB::hpnicfDhcpRelay2BadNum,Counter64,read-only,,current,,The total number of the bad packets received.
.1.3.6.1.4.1.11.2.14.11.15.2.122.3.2.6,HPN-ICF-DHCP4-MIB::hpnicfDhcpRelay2BootpRequestNum,Counter64,read-only,,current,,The total number of the BOOTREQUEST packets handled by DHCP relay.
.1.3.6.1.4.1.11.2.14.11.15.2.122.3.2.7,HPN-ICF-DHCP4-MIB::hpnicfDhcpRelay2DiscoverNum,Counter64,read-only,,current,,The total number of the DHCPDISCOVER packets handled by DHCP relay.
.1.3.6.1.4.1.11.2.14.11.15.2.122.3.2.8,HPN-ICF-DHCP4-MIB::hpnicfDhcpRelay2RequestNum,Counter64,read-only,,current,,The total number of the DHCPREQUEST packets handled by DHCP relay.
.1.3.6.1.4.1.11.2.14.11.15.2.122.3.2.9,HPN-ICF-DHCP4-MIB::hpnicfDhcpRelay2DeclineNum,Counter64,read-only,,current,,The total number of the DHCPDECLINE packets handled by DHCP relay.
.1.3.6.1.4.1.11.2.14.11.15.2.122.3.2.10,HPN-ICF-DHCP4-MIB::hpnicfDhcpRelay2ReleaseNum,Counter64,read-only,,current,,The total number of the DHCPRELEASE packets handled by DHCP relay.
.1.3.6.1.4.1.11.2.14.11.15.2.122.3.2.11,HPN-ICF-DHCP4-MIB::hpnicfDhcpRelay2InformNum,Counter64,read-only,,current,,The total number of the DHCPINFORM packets handled by DHCP relay.
.1.3.6.1.4.1.11.2.14.11.15.2.122.3.2.12,HPN-ICF-DHCP4-MIB::hpnicfDhcpRelay2BootpReplyNum,Counter64,read-only,,current,,The total number of the BOOTREPLY packets handled by DHCP relay.
.1.3.6.1.4.1.11.2.14.11.15.2.122.3.2.13,HPN-ICF-DHCP4-MIB::hpnicfDhcpRelay2OfferNum,Counter64,read-only,,current,,The total number of the DHCPOFFER packets handled by DHCP relay.
.1.3.6.1.4.1.11.2.14.11.15.2.122.3.2.14,HPN-ICF-DHCP4-MIB::hpnicfDhcpRelay2AckNum,Counter64,read-only,,current,,The total number of the DHCPACK packets handled by DHCP relay.
.1.3.6.1.4.1.11.2.14.11.15.2.122.3.2.15,HPN-ICF-DHCP4-MIB::hpnicfDhcpRelay2NakNum,Counter64,read-only,,current,,The total number of the DHCPNAK packets handled by DHCP relay.
.1.3.6.1.4.1.11.2.14.11.15.2.122.4,HPN-ICF-DHCP4-MIB::hpnicfDhcpRelay2Tables,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.2.122.4.1,HPN-ICF-DHCP4-MIB::hpnicfDhcpRelay2IfConfigTable,,not-accessible,,current,,A table for configuring relay functions for interfaces.
.1.3.6.1.4.1.11.2.14.11.15.2.122.4.1.1,HPN-ICF-DHCP4-MIB::hpnicfDhcpRelay2IfConfigEntry,,not-accessible,ifIndex,current,,An entry for configuring relay functions for an interface.
.1.3.6.1.4.1.11.2.14.11.15.2.122.4.1.1.1,HPN-ICF-DHCP4-MIB::hpnicfDhcpRelay2IfSelectRelay,INTEGER,read-write,,current,true(1):false(2),If the value is 'true', the DHCP relay function would be enabled on this interface.
.1.3.6.1.4.1.11.2.14.11.15.2.122.4.1.1.2,HPN-ICF-DHCP4-MIB::hpnicfDhcpRelay2IfCheckMac,INTEGER,read-write,,current,true(1):false(2),If the value is 'true', the function of checking MAC address of packets received from the interface would be enabled.
.1.3.6.1.4.1.11.2.14.11.15.2.122.4.1.1.3,HPN-ICF-DHCP4-MIB::hpnicfDhcpRelay2IfOpt82Enable,INTEGER,read-write,,current,true(1):false(2),If DHCP relay supports option 82 functions, the value is 'true'. If DHCP relay does NOT support option 82 functions, the value is 'false'.
.1.3.6.1.4.1.11.2.14.11.15.2.122.4.1.1.4,HPN-ICF-DHCP4-MIB::hpnicfDhcpRelay2IfOpt82Strategy,INTEGER,read-write,,current,drop(1):keep(2):replace(3),The strategies of DHCP relay handling option 82. 'drop' indicates DHCP relay discarding the request packet including option 82. 'keep' indicates DHCP relay accepting the request packet without any change of the option 82. 'replace' indicates DHCP relay accepting the request packet on condition that it generates a new option 82 to replace the original one.
.1.3.6.1.4.1.11.2.14.11.15.2.122.4.1.1.5,HPN-ICF-DHCP4-MIB::hpnicfDhcpRelay2IfOpt82CIDMode,INTEGER,read-write,,current,normal(1):verbose(2):userDefine(3),The mode of the circuit ID suboption of DHCP option 82. 'normal' is the standard mode. 'verbose' is the detailed mode. 'userDefine' is the user-defined mode. If the value of this object is set to 'userDefine', hpnicfDhcpRelay2IfOpt82CIDStr must also be set.
.1.3.6.1.4.1.11.2.14.11.15.2.122.4.1.1.6,HPN-ICF-DHCP4-MIB::hpnicfDhcpRelay2IfOpt82CIDNodeType,INTEGER,read-write,,current,invalid(1):mac(2):sysname(3):userDefine(4),Type of access node identifier that is used to fill in the circuit ID suboption of option 82 when the value of hpnicfDhcpRelay2IfOpt82CIDMode is set to 'verbose'. The SET operation of this object must be with the SET operation of hpnicfDhcpRelay2IfOpt82CIDMode. 'invalid' indicates that the node identifier is NOT used to fill in the circuit ID suboption of option 82. If the value of hpnicfDhcpRelay2IfOpt82CIDMode is NOT 'verbose', the value of this object is set to 'invalid' automatically. Otherwise the value of this object cannot be set to 'invalid'. 'mac' indicates that the node identifier is filled in with the MAC of DHCP relay input interface. If the value of hpnicfDhcpRelay2IfOpt82CIDMode is set to 'verbose', the default value of this object is 'mac'. 'sysname' indicates that the node identifier is filled in with the sysname of the DHCP relay device. 'userDefine' indicates that the node identifier is filled in with the string defined by the object of hpnicfDhcpRelay2IfOpt82CIDNodeStr. If the value is set to 'userDefine', the value of hpnicfDhcpRelay2IfOpt82CIDNodeStr must be set to a non-zero length string simultaneously.
.1.3.6.1.4.1.11.2.14.11.15.2.122.4.1.1.7,HPN-ICF-DHCP4-MIB::hpnicfDhcpRelay2IfOpt82CIDNodeStr,OCTET,read-write,,current,,The string defined by user to fill in the node identifier in the verbose mode. If the value of hpnicfDhcpRelay2IfOpt82CIDMode is NOT 'verbose', or the value of hpnicfDhcpRelay2IfOpt82CIDNodeType is NOT 'userDefine', it is set with a zero-length string automatically. Otherwise it must be set with a non-zero length string. The SET operation of this object must be with the SET operation of hpnicfDhcpRelay2IfOpt82CIDMode and hpnicfDhcpRelay2IfOpt82CIDNodeType.
.1.3.6.1.4.1.11.2.14.11.15.2.122.4.1.1.8,HPN-ICF-DHCP4-MIB::hpnicfDhcpRelay2IfOpt82CIDStr,OCTET,read-write,,current,,The string defined by user to fill in the circuit ID suboption of option 82 in the user-define mode. If the value of hpnicfDhcpRelay2IfOpt82CIDMode is NOT 'userDefine', it is set to a zero-length string automatically. Otherwise it must be set with a non-zero length string. The SET operation of this object must be with the SET operation of hpnicfDhcpRelay2IfOpt82CIDMode.
.1.3.6.1.4.1.11.2.14.11.15.2.122.4.1.1.9,HPN-ICF-DHCP4-MIB::hpnicfDhcpRelay2IfOpt82CIDFormat,INTEGER,read-write,,current,hex(1):ascii(2):undefine(3),The format of the circuit ID suboption of DHCP option 82. 'hex' is the hex format. 'ascii' is the ascii format. 'undefine' is the undefine format. If the value of hpnicfDhcpRelay2IfOpt82CIDMode is 'normal', the value of this object is set to 'hex' automatically and cannot be set to 'undefine'. If the value of hpnicfDhcpRelay2IfOpt82CIDMode is 'verbose', the default value of this object is 'undefine'. If the value of hpnicfDhcpRelay2IfOpt82CIDMode is 'userDefine', the value of this object is set to 'ascii' automatically and cannot be set to other value. The SET operation of this object must be with the SET operation of hpnicfDhcpRelay2IfOpt82CIDMode.
.1.3.6.1.4.1.11.2.14.11.15.2.122.4.1.1.10,HPN-ICF-DHCP4-MIB::hpnicfDhcpRelay2IfOpt82RIDMode,INTEGER,read-write,,current,normal(1):sysname(2):userDefine(3),The mode of the remote ID suboption of DHCP option 82. 'normal' is the standard mode. 'sysname' is the sysname mode. 'userDefine' is the user-defined mode. If the value of this object is set to 'userDefine', hpnicfDhcpRelay2IfOpt82RIDStr must also be set.
.1.3.6.1.4.1.11.2.14.11.15.2.122.4.1.1.11,HPN-ICF-DHCP4-MIB::hpnicfDhcpRelay2IfOpt82RIDStr,OCTET,read-write,,current,,The string defined by user to fill in the remote ID in the user-defined mode. If the value of hpnicfDhcpRelay2IfOpt82RIDMode is NOT 'userDefine', it is set to a zero-length string automatically. Otherwise it must be set with a non-zero length string. The SET operation of this object must be with the SET operation of hpnicfDhcpRelay2IfOpt82RIDMode.
.1.3.6.1.4.1.11.2.14.11.15.2.122.4.1.1.12,HPN-ICF-DHCP4-MIB::hpnicfDhcpRelay2IfOpt82RIDFormat,INTEGER,read-write,,current,hex(1):ascii(2),The format of the remote ID suboption of DHCP option 82. 'hex' is the hex format. 'ascii' is the ascii format. If the value of hpnicfDhcpRelay2IfOpt82RIDMode is 'sysname' or 'userDefine', this object is set with 'ascii' automatically and cannot be set with other value. If the value of hpnicfDhcpRelay2IfOpt82RIDMode is 'normal', the default value of this object is 'hex'. The SET operation of this object must be with the SET operation of hpnicfDhcpRelay2IfOpt82RIDMode.
.1.3.6.1.4.1.11.2.14.11.15.2.122.4.2,HPN-ICF-DHCP4-MIB::hpnicfDhcpRelay2SrvAddrTable,,not-accessible,,current,,A table for configuring a DHCP server address on the interface.
.1.3.6.1.4.1.11.2.14.11.15.2.122.4.2.1,HPN-ICF-DHCP4-MIB::hpnicfDhcpRelay2SrvAddrEntry,,not-accessible,ifIndex:hpnicfDhcpRelay2SrvAddrIP,current,,An entry for configuring a DHCP server address on the interface.
.1.3.6.1.4.1.11.2.14.11.15.2.122.4.2.1.1,HPN-ICF-DHCP4-MIB::hpnicfDhcpRelay2SrvAddrIP,OCTET,not-accessible,,current,,Ip address of DHCP server.
.1.3.6.1.4.1.11.2.14.11.15.2.122.4.2.1.2,HPN-ICF-DHCP4-MIB::hpnicfDhcpRelay2SrvAddrRowStatus,INTEGER,read-create,,current,active(1):notInService(2):notReady(3):createAndGo(4):createAndWait(5):destroy(6),Operation status of this table entry. Three actions are used: active, createAndGo, destroy.
.1.3.6.1.4.1.11.2.14.11.15.2.122.4.3,HPN-ICF-DHCP4-MIB::hpnicfDhcpRelay2UserInfoTable,,not-accessible,,current,,A table containing the user information of DHCP client.
.1.3.6.1.4.1.11.2.14.11.15.2.122.4.3.1,HPN-ICF-DHCP4-MIB::hpnicfDhcpRelay2UserInfoEntry,,not-accessible,hpnicfDhcpRelay2UserInfoVpnIndex:hpnicfDhcpRelay2UserInfoIpAddr,current,,An entry containing the user information of DHCP client.
.1.3.6.1.4.1.11.2.14.11.15.2.122.4.3.1.1,HPN-ICF-DHCP4-MIB::hpnicfDhcpRelay2UserInfoVpnIndex,Unsigned32,not-accessible,,current,,VPN index of the DHCP client.
.1.3.6.1.4.1.11.2.14.11.15.2.122.4.3.1.2,HPN-ICF-DHCP4-MIB::hpnicfDhcpRelay2UserInfoIpAddr,OCTET,not-accessible,,current,,DHCP client's IP address.
.1.3.6.1.4.1.11.2.14.11.15.2.122.4.3.1.3,HPN-ICF-DHCP4-MIB::hpnicfDhcpRelay2UserInfoMacAddr,OCTET,read-only,,current,,DHCP client's MAC address.
.1.3.6.1.4.1.11.2.14.11.15.2.122.4.3.1.4,HPN-ICF-DHCP4-MIB::hpnicfDhcpRelay2UserInfoIfIndex,Integer32,read-only,,current,,The index of the interface that DHCP client adhered to. 0 means that no interface information is recorded in the user information entry.
.1.3.6.1.4.1.11.2.14.11.15.2.122.4.3.1.5,HPN-ICF-DHCP4-MIB::hpnicfDhcpRelay2UserInfoRowStatus,INTEGER,read-create,,current,active(1):notInService(2):notReady(3):createAndGo(4):createAndWait(5):destroy(6),Operation status of this table entry. Only destroy action is allow to use.
.1.3.6.1.4.1.11.2.14.11.15.2.124,HPN-ICF-OID-MIB::hpnicfDhcpSnoop2,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.2.124.1,HPN-ICF-DHCP-SNOOP2-MIB::hpnicfDhcpSnoop2ScalarObjects,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.2.124.1.1,HPN-ICF-DHCP-SNOOP2-MIB::hpnicfDhcpSnoop2ConfigGroup,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.2.124.1.1.1,HPN-ICF-DHCP-SNOOP2-MIB::hpnicfDhcpSnoop2Enabled,INTEGER,read-write,,current,true(1):false(2),If the value of this object is set to 'true', DHCP snooping is enabled.
.1.3.6.1.4.1.11.2.14.11.15.2.124.1.1.2,HPN-ICF-DHCP-SNOOP2-MIB::hpnicfDhcpSnoop2BindDbName,OCTET,read-write,,current,,Name of the file that used to store binding information. If the value of the object is set to a zero-length string, the configuration will be removed.
.1.3.6.1.4.1.11.2.14.11.15.2.124.1.1.3,HPN-ICF-DHCP-SNOOP2-MIB::hpnicfDhcpSnoop2BindRefreshIntvl,Unsigned32,read-write,,current,,The refresh interval of the binding information in seconds.
.1.3.6.1.4.1.11.2.14.11.15.2.124.1.1.4,HPN-ICF-DHCP-SNOOP2-MIB::hpnicfDhcpSnoop2BindRefresh,INTEGER,read-write,,current,on(1),If the value of this object is set to 'on', the binding information will be refreshed immediately.
.1.3.6.1.4.1.11.2.14.11.15.2.124.1.2,HPN-ICF-DHCP-SNOOP2-MIB::hpnicfDhcpSnoop2StatisticsGroup,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.2.124.1.2.1,HPN-ICF-DHCP-SNOOP2-MIB::hpnicfDhcpSnoop2PktSentNum,Counter64,read-only,,current,,The total number of the packets send by DHCP snooping.
.1.3.6.1.4.1.11.2.14.11.15.2.124.1.2.2,HPN-ICF-DHCP-SNOOP2-MIB::hpnicfDhcpSnoop2PktRcvNum,Counter64,read-only,,current,,The total number of the packets received by DHCP snooping.
.1.3.6.1.4.1.11.2.14.11.15.2.124.1.2.3,HPN-ICF-DHCP-SNOOP2-MIB::hpnicfDhcpSnoop2PktDropNum,Counter64,read-only,,current,,The total number of the packets dropped by DHCP snooping.
.1.3.6.1.4.1.11.2.14.11.15.2.124.2,HPN-ICF-DHCP-SNOOP2-MIB::hpnicfDhcpSnoop2Tables,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.2.124.2.1,HPN-ICF-DHCP-SNOOP2-MIB::hpnicfDhcpSnoop2BindTable,,not-accessible,,current,,The table containing information of DHCP clients listened by DHCP snooping.
.1.3.6.1.4.1.11.2.14.11.15.2.124.2.1.1,HPN-ICF-DHCP-SNOOP2-MIB::hpnicfDhcpSnoop2BindEntry,,not-accessible,hpnicfDhcpSnoop2BindIpAddr:hpnicfDhcpSnoop2BindVlanId:hpnicfDhcpSnoop2BindSecVlanId,current,,An entry containing information of DHCP clients.
.1.3.6.1.4.1.11.2.14.11.15.2.124.2.1.1.1,HPN-ICF-DHCP-SNOOP2-MIB::hpnicfDhcpSnoop2BindIpAddr,OCTET,not-accessible,,current,,DHCP client's IP addresses collected by DHCP snooping.
.1.3.6.1.4.1.11.2.14.11.15.2.124.2.1.1.2,HPN-ICF-DHCP-SNOOP2-MIB::hpnicfDhcpSnoop2BindVlanId,Unsigned32,not-accessible,,current,,DHCP client's VLAN ID collected by DHCP snooping.
.1.3.6.1.4.1.11.2.14.11.15.2.124.2.1.1.3,HPN-ICF-DHCP-SNOOP2-MIB::hpnicfDhcpSnoop2BindSecVlanId,Unsigned32,not-accessible,,current,,DHCP client's second VLAN ID collected by DHCP snooping. 65535 means no second VLAN.
.1.3.6.1.4.1.11.2.14.11.15.2.124.2.1.1.4,HPN-ICF-DHCP-SNOOP2-MIB::hpnicfDhcpSnoop2BindMacAddr,OCTET,read-only,,current,,DHCP client's MAC address collected by DHCP snooping.
.1.3.6.1.4.1.11.2.14.11.15.2.124.2.1.1.5,HPN-ICF-DHCP-SNOOP2-MIB::hpnicfDhcpSnoop2BindLease,Unsigned32,read-only,,current,,Left lease time in seconds collected by DHCP snooping. The value of this object cannot be 0.
.1.3.6.1.4.1.11.2.14.11.15.2.124.2.1.1.6,HPN-ICF-DHCP-SNOOP2-MIB::hpnicfDhcpSnoop2BindPortIndex,Integer32,read-only,,current,,DHCP client's port index collected by DHCP snooping. The value of zero means unknown port.
.1.3.6.1.4.1.11.2.14.11.15.2.124.2.1.1.7,HPN-ICF-DHCP-SNOOP2-MIB::hpnicfDhcpSnoop2BindRowStatus,INTEGER,read-create,,current,active(1):notInService(2):notReady(3):createAndGo(4):createAndWait(5):destroy(6),RowStatus. Only destroy action is allow to use.
.1.3.6.1.4.1.11.2.14.11.15.2.124.2.2,HPN-ICF-DHCP-SNOOP2-MIB::hpnicfDhcpSnoop2IfConfigTable,,not-accessible,,current,,A table is used to configure DHCP snooping functions on ports.
.1.3.6.1.4.1.11.2.14.11.15.2.124.2.2.1,HPN-ICF-DHCP-SNOOP2-MIB::hpnicfDhcpSnoop2IfConfigEntry,,not-accessible,ifIndex,current,,An entry containing DHCP snooping configurations of ports.
.1.3.6.1.4.1.11.2.14.11.15.2.124.2.2.1.1,HPN-ICF-DHCP-SNOOP2-MIB::hpnicfDhcpSnoop2IfTrustStatus,INTEGER,read-write,,current,untrusted(0):trusted(1),Trusted status of the port.
.1.3.6.1.4.1.11.2.14.11.15.2.124.2.2.1.2,HPN-ICF-DHCP-SNOOP2-MIB::hpnicfDhcpSnoop2IfCheckMac,INTEGER,read-write,,current,true(1):false(2),If the value is 'true', MAC address of DHCP packets received on the port will be checked.
.1.3.6.1.4.1.11.2.14.11.15.2.124.2.2.1.3,HPN-ICF-DHCP-SNOOP2-MIB::hpnicfDhcpSnoop2IfCheckRequest,INTEGER,read-write,,current,true(1):false(2),If the value is 'true', DHCP request packets will be checked.
.1.3.6.1.4.1.11.2.14.11.15.2.124.2.2.1.4,HPN-ICF-DHCP-SNOOP2-MIB::hpnicfDhcpSnoop2IfRateLimit,Unsigned32,read-write,,current,,The rate limit in Kbps. If the value is 0, there is no rate limit on the port.
.1.3.6.1.4.1.11.2.14.11.15.2.124.2.2.1.5,HPN-ICF-DHCP-SNOOP2-MIB::hpnicfDhcpSnoop2IfRecordBind,INTEGER,read-write,,current,true(1):false(2),If the value is 'true', information of DHCP packets received on the port will be recorded.
.1.3.6.1.4.1.11.2.14.11.15.2.124.2.2.1.6,HPN-ICF-DHCP-SNOOP2-MIB::hpnicfDhcpSnoop2IfMaxLearnNum,Unsigned32,read-write,,current,,The maximum number of binding entries that could be learned on the port. If the value is 0, it means that there is no threshold on the port.
.1.3.6.1.4.1.11.2.14.11.15.2.124.2.2.1.7,HPN-ICF-DHCP-SNOOP2-MIB::hpnicfDhcpSnoop2IfOpt82Enable,INTEGER,read-write,,current,true(1):false(2),If DHCP snooping supports option 82 functions, the value is 'true'. If DHCP snooping does NOT support option 82 functions, the value is 'false'.
.1.3.6.1.4.1.11.2.14.11.15.2.124.2.2.1.8,HPN-ICF-DHCP-SNOOP2-MIB::hpnicfDhcpSnoop2IfOpt82Strategy,INTEGER,read-write,,current,drop(1):keep(2):replace(3),The strategy of DHCP snooping handling option 82. 'drop' indicates DHCP snooping discarding the request packet including option 82. 'keep' indicates DHCP snooping accepting the request packet without any change of the option 82. 'replace' indicates DHCP snooping accepting the request packet on condition that it generates a new option 82 to replace the original one.
.1.3.6.1.4.1.11.2.14.11.15.2.124.2.2.1.9,HPN-ICF-DHCP-SNOOP2-MIB::hpnicfDhcpSnoop2IfOpt82CIDMode,INTEGER,read-write,,current,normal(1):verbose(2):userDefine(3),The mode of filling in the circuit ID suboption of DHCP option 82. 'normal' is the standard mode. 'verbose' is the detailed mode. 'userDefine' is the user-defined mode. If the value of this object is set to 'userDefine', hpnicfDhcpSnoop2IfOpt82CIDStr must also be set.
.1.3.6.1.4.1.11.2.14.11.15.2.124.2.2.1.10,HPN-ICF-DHCP-SNOOP2-MIB::hpnicfDhcpSnoop2IfOpt82CIDNodeType,INTEGER,read-write,,current,invalid(1):mac(2):sysname(3):userDefine(4),Type of access node identifier that is used to fill in the circuit ID suboption of option 82 when the value of hpnicfDhcpSnoop2IfOption82CIDMode is set to 'verbose'. The SET operation of this object must be with the SET operation of hpnicfDhcpSnoop2IfOpt82CIDMode. 'invalid' indicates that the node identifier is NOT used to fill in the circuit ID suboption of option 82. If the value of hpnicfDhcpSnoop2IfOpt82CIDMode is NOT 'verbose', the value of this object is set to 'invalid' automatically. Otherwise the value of this object cannot be set to 'invalid'. 'mac' indicates that the node identifier is filled in with the bridge MAC of DHCP snooping device. If the value of hpnicfDhcpSnoop2IfOpt82CIDMode is set to 'verbose', the default value of this object is 'mac'. 'sysname' indicates that the node identifier is filled in with the sysname of the DHCP snooping. 'userDefine' indicates the node identifier is filled in with the string defined by the object of hpnicfDhcpSnoop2IfOpt82CIDNodeStr. If the value is set to 'userDefine', the value of hpnicfDhcpSnoop2IfOpt82CIDNodeStr must also be set to a non-zero length string.
.1.3.6.1.4.1.11.2.14.11.15.2.124.2.2.1.11,HPN-ICF-DHCP-SNOOP2-MIB::hpnicfDhcpSnoop2IfOpt82CIDNodeStr,OCTET,read-write,,current,,The string defined by user to fill in the node identifier in the verbose mode. If the value of hpnicfDhcpSnoop2IfOpt82CIDMode is NOT 'verbose', or the value of hpnicfDhcpSnoop2IfOpt82CIDNodeType is NOT 'userDefine', it is set to a zero-length string automatically. Otherwise it must be set to a non-zero length string. The SET operation of this object must be with the SET operation of hpnicfDhcpSnoop2IfOpt82CIDMode and hpnicfDhcpSnoop2IfOpt82CIDNodeType.
.1.3.6.1.4.1.11.2.14.11.15.2.124.2.2.1.12,HPN-ICF-DHCP-SNOOP2-MIB::hpnicfDhcpSnoop2IfOpt82CIDStr,OCTET,read-write,,current,,The string defined by user to fill in the circuit ID suboption of option 82 in the user-define mode. If the value of hpnicfDhcpSnoop2IfOpt82CIDMode is NOT 'userDefine', it is set to a zero-length string automatically. Otherwise it must be set to a non-zero length string. The SET operation of this object must be with the SET operation of hpnicfDhcpSnoop2IfOpt82CIDMode.
.1.3.6.1.4.1.11.2.14.11.15.2.124.2.2.1.13,HPN-ICF-DHCP-SNOOP2-MIB::hpnicfDhcpSnoop2IfOpt82CIDFormat,INTEGER,read-write,,current,hex(1):ascii(2):undefine(3),The format of the circuit ID suboption of DHCP option 82. 'hex' is the hex format. 'ascii' is the ascii format. 'undefine' is the undefine format. If the value of hpnicfDhcpSnoop2IfOpt82CIDMode is 'normal', this object is set with 'hex' automatically and cannot be set with 'undefine'. If the value of hpnicfDhcpSnoop2IfOpt82CIDMode is 'verbose', the default value of this object is 'undefine'. If the value of hpnicfDhcpSnoop2IfOpt82CIDMode is 'userDefine', this object is set with 'ascii' automatically and cannot be set with other value. The SET operation of this object must be with the SET operation of hpnicfDhcpSnoop2IfOpt82CIDMode.
.1.3.6.1.4.1.11.2.14.11.15.2.124.2.2.1.14,HPN-ICF-DHCP-SNOOP2-MIB::hpnicfDhcpSnoop2IfOpt82RIDMode,INTEGER,read-write,,current,normal(1):sysname(2):userDefine(3),The mode of filling in the remote ID suboption of DHCP option 82. 'normal' is the standard mode. 'userDefine' is the user-defined mode. 'sysname' is the sysname mode. If the value of this object is set to 'userDefine', hpnicfDhcpSnoop2IfOpt82RIDStr must also be set.
.1.3.6.1.4.1.11.2.14.11.15.2.124.2.2.1.15,HPN-ICF-DHCP-SNOOP2-MIB::hpnicfDhcpSnoop2IfOpt82RIDStr,OCTET,read-write,,current,,The string defined by user to fill in the remote ID in the user-defined mode. If the value of hpnicfDhcpSnoop2IfOpt82RIDMode is NOT 'userDefine', this object is set with a zero-length string automatically. Otherwise it must be set with a non-zero length string. The SET operation of this object must be with the SET operation of hpnicfDhcpSnoop2IfOpt82RIDMode.
.1.3.6.1.4.1.11.2.14.11.15.2.124.2.2.1.16,HPN-ICF-DHCP-SNOOP2-MIB::hpnicfDhcpSnoop2IfOpt82RIDFormat,INTEGER,read-write,,current,hex(1):ascii(2),The format of DHCP option 82 remote ID in 'normal' mode. 'hex' is the hex format. 'ascii' is the ascii format. If the value of hpnicfDhcpSnoop2IfOpt82RIDMode is 'sysname' or 'userDefine', this object is set with 'ascii' automatically and cannot be set with other value. If the value of hpnicfDhcpSnoop2IfOpt82RIDMode is 'normal', the default value of this object is 'hex'. The SET operation of this object must be with the SET operation of hpnicfDhcpSnoop2IfOpt82RIDMode.
.1.3.6.1.4.1.11.2.14.11.15.2.124.2.3,HPN-ICF-DHCP-SNOOP2-MIB::hpnicfDhcpSnoop2IfVlanCIDTable,,not-accessible,,current,,A table containing the information of the circuit ID suboption of DHCP option 82 in VLAN.
.1.3.6.1.4.1.11.2.14.11.15.2.124.2.3.1,HPN-ICF-DHCP-SNOOP2-MIB::hpnicfDhcpSnoop2IfVlanCIDEntry,,not-accessible,ifIndex:hpnicfDhcpSnoop2IfVlanCIDVlanIndex,current,,An entry containing the information of the circuit ID suboption of DHCP option 82 in VLAN.
.1.3.6.1.4.1.11.2.14.11.15.2.124.2.3.1.1,HPN-ICF-DHCP-SNOOP2-MIB::hpnicfDhcpSnoop2IfVlanCIDVlanIndex,Unsigned32,not-accessible,,current,,VLAN ID.
.1.3.6.1.4.1.11.2.14.11.15.2.124.2.3.1.2,HPN-ICF-DHCP-SNOOP2-MIB::hpnicfDhcpSnoop2IfVlanCIDStr,OCTET,read-create,,current,,The string defined by user to fill in the circuit ID suboption of option 82.
.1.3.6.1.4.1.11.2.14.11.15.2.124.2.3.1.3,HPN-ICF-DHCP-SNOOP2-MIB::hpnicfDhcpSnoop2IfVlanCIDRowStatus,INTEGER,read-create,,current,active(1):notInService(2):notReady(3):createAndGo(4):createAndWait(5):destroy(6),Operation status of this table entry. Three actions are used: active, createAndGo, destroy.
.1.3.6.1.4.1.11.2.14.11.15.2.124.2.4,HPN-ICF-DHCP-SNOOP2-MIB::hpnicfDhcpSnoop2IfVlanRIDTable,,not-accessible,,current,,A table containing the information of the remote ID suboption of DHCP option 82 in VLAN.
.1.3.6.1.4.1.11.2.14.11.15.2.124.2.4.1,HPN-ICF-DHCP-SNOOP2-MIB::hpnicfDhcpSnoop2IfVlanRIDEntry,,not-accessible,ifIndex:hpnicfDhcpSnoop2IfVlanRIDVlanIndex,current,,An entry containing the information of the remote ID suboption of DHCP option 82 in VLAN.
.1.3.6.1.4.1.11.2.14.11.15.2.124.2.4.1.1,HPN-ICF-DHCP-SNOOP2-MIB::hpnicfDhcpSnoop2IfVlanRIDVlanIndex,Unsigned32,not-accessible,,current,,VLAN ID.
.1.3.6.1.4.1.11.2.14.11.15.2.124.2.4.1.2,HPN-ICF-DHCP-SNOOP2-MIB::hpnicfDhcpSnoop2IfVlanRIDMode,INTEGER,read-create,,current,sysname(1):userDefine(2),The mode of filling in the remote ID suboption of DHCP option 82 in VLAN. 'sysname' indicates using the device sysname to fill in the suboption. 'userDefine' indicates using the string defined by hpnicfDhcpSnoop2IfVlanRIDStr to fill in the suboption. If the value of this object is set to 'userDefine', hpnicfDhcpSnoop2IfVlanRIDStr must also be set.
.1.3.6.1.4.1.11.2.14.11.15.2.124.2.4.1.3,HPN-ICF-DHCP-SNOOP2-MIB::hpnicfDhcpSnoop2IfVlanRIDStr,OCTET,read-create,,current,,The string used to fill in the remote ID suboption. If the value of hpnicfDhcpSnoop2IfVlanRIDMode is NOT 'userDefine', this object is set with a zero-length string automatically. Otherwise it must be set with a non-zero length string. The SET operation of this object must be with the SET operation of hpnicfDhcpSnoop2IfVlanRIDMode.
.1.3.6.1.4.1.11.2.14.11.15.2.124.2.4.1.4,HPN-ICF-DHCP-SNOOP2-MIB::hpnicfDhcpSnoop2IfVlanRIDRowStatus,INTEGER,read-create,,current,active(1):notInService(2):notReady(3):createAndGo(4):createAndWait(5):destroy(6),Operation status of this table entry. Three actions are used: active, createAndGo, destroy.
.1.3.6.1.4.1.11.2.14.11.15.2.125,HPN-ICF-OID-MIB::hpnicfRmonExt,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.2.125.0,HPN-ICF-RMON-EXT2-MIB::hpnicfRmonExtEvent,,,,,,Definition point for notifications.
.1.3.6.1.4.1.11.2.14.11.15.2.125.0.1,HPN-ICF-RMON-EXT2-MIB::hpnicfRmonExtRisingAlarm,,,,,,The SNMP trap that is generated when an alarm entry crosses its rising threshold and generates an event that is configured for sending SNMP traps.
.1.3.6.1.4.1.11.2.14.11.15.2.125.0.2,HPN-ICF-RMON-EXT2-MIB::hpnicfRmonExtFallingAlarm,,,,,,The SNMP trap that is generated when an alarm entry crosses its falling threshold and generates an event that is configured for sending SNMP traps.
.1.3.6.1.4.1.11.2.14.11.15.2.125.1,HPN-ICF-RMON-EXT2-MIB::hpnicfRmonExtAlarmTable,,not-accessible,,current,,A list of alarm entries.
.1.3.6.1.4.1.11.2.14.11.15.2.125.1.1,HPN-ICF-RMON-EXT2-MIB::hpnicfRmonExtAlarmEntry,,not-accessible,hpnicfRmonExtAlarmIndex,current,,A list of parameters that set up a periodic checking for alarm conditions. For example, an instance of the alarmValue object might be named alarmValue.8
.1.3.6.1.4.1.11.2.14.11.15.2.125.1.1.1,HPN-ICF-RMON-EXT2-MIB::hpnicfRmonExtAlarmIndex,Integer32,read-only,,current,,An index that uniquely identifies an entry in the alarm table. Each such entry defines a diagnostic sample at a particular interval for an object on the device.
.1.3.6.1.4.1.11.2.14.11.15.2.125.1.1.2,HPN-ICF-RMON-EXT2-MIB::hpnicfRmonExtAlarmInterval,Integer32,read-create,,current,,The interval in seconds over which the data is sampled and compared with the rising and falling thresholds. When setting this variable, care should be taken in the case of deltaValue sampling - the interval should be set short enough that the sampled variable is very unlikely to increase or decrease by more than 2^31 - 1 during a single sampling interval. This object may not be modified if the associated alarmStatus object is equal to valid.
.1.3.6.1.4.1.11.2.14.11.15.2.125.1.1.3,HPN-ICF-RMON-EXT2-MIB::hpnicfRmonExtAlarmVariable,OCTET,read-create,,current,,The object identifier of the particular variable to be sampled. Only variables that resolve to an ASN.1 primitive type of INTEGER (INTEGER, Integer32, Unsigned32, Counter32, Counter64, Gauge, or TimeTicks) may be sampled. Because SNMP access control is articulated entirely in terms of the contents of MIB views, no access control mechanism exists that can restrict the value of this object to identify only those objects that exist in a particular MIB view. Because there is thus no acceptable means of restricting the read access that could be obtained through the alarm mechanism, the probe must only grant write access to this object in those views that have read access to all objects on the probe. During a set operation, if the supplied variable name is not available in the selected MIB view, a badValue error must be returned. This object may not be modified if the associated alarmStatus object is equal to valid.
.1.3.6.1.4.1.11.2.14.11.15.2.125.1.1.4,HPN-ICF-RMON-EXT2-MIB::hpnicfRmonExtAlarmSympol,OCTET,read-create,,current,,A comment describing this alarm entry. This object may not be modified if the associated alarmStatus object is equal to valid.
.1.3.6.1.4.1.11.2.14.11.15.2.125.1.1.5,HPN-ICF-RMON-EXT2-MIB::hpnicfRmonExtAlarmSampleType,INTEGER,read-create,,current,absoluteValue(1):deltaValue(2):speedValue(3),The method of sampling the selected variable and calculating the value to be compared against the thresholds. If the value of this object is absoluteValue, the value of the selected variable will be compared directly with the thresholds at the end of the sampling interval. If the value of this object is deltaValue, the value of the selected variable at the last sample will be subtracted from the current value, and the difference compared with the thresholds. This object may not be modified if the associated alarmStatus object is equal to valid.
.1.3.6.1.4.1.11.2.14.11.15.2.125.1.1.6,HPN-ICF-RMON-EXT2-MIB::hpnicfRmonExtAlarmValue,Integer32,read-only,,current,,The value of the statistic during the last sampling period. For example, if the sample type is deltaValue, this value will be the difference between the samples at the beginning and end of the period. If the sample type is absoluteValue, this value will be the sampled value at the end of the period. This is the value that is compared with the rising and falling thresholds. The value during the current sampling period is not made available until the period is completed and will remain available until the next period completes.
.1.3.6.1.4.1.11.2.14.11.15.2.125.1.1.7,HPN-ICF-RMON-EXT2-MIB::hpnicfRmonExtAlarmStartupAlarm,INTEGER,read-create,,current,risingAlarm(1):fallingAlarm(2):risingOrFallingAlarm(3),The alarm that may be sent when this entry is first set to valid. If the first sample after this entry becomes valid is greater than or equal to the risingThreshold and alarmStartupAlarm is equal to risingAlarm or risingOrFallingAlarm, then a single rising alarm will be generated. If the first sample after this entry becomes valid is less than or equal to the fallingThreshold and alarmStartupAlarm is equal to fallingAlarm or risingOrFallingAlarm, then a single falling alarm will be generated. This object may not be modified if the associated alarmStatus object is equal to valid.
.1.3.6.1.4.1.11.2.14.11.15.2.125.1.1.8,HPN-ICF-RMON-EXT2-MIB::hpnicfRmonExtAlarmRisingThreshold,Integer32,read-create,,current,,A threshold for the sampled statistic. When the current sampled value is greater than or equal to this threshold, and the value at the last sampling interval was less than this threshold, a single event will be generated. A single event will also be generated if the first sample after this entry becomes valid is greater than or equal to this threshold and the associated alarmStartupAlarm is equal to risingAlarm or risingOrFallingAlarm. After a rising event is generated, another such event will not be generated until the sampled value falls below this threshold and reaches the alarmFallingThreshold. This object may not be modified if the associated alarmStatus object is equal to valid.
.1.3.6.1.4.1.11.2.14.11.15.2.125.1.1.9,HPN-ICF-RMON-EXT2-MIB::hpnicfRmonExtAlarmFallingThreshold,Integer32,read-create,,current,,A threshold for the sampled statistic. When the current sampled value is less than or equal to this threshold, and the value at the last sampling interval was greater than this threshold, a single event will be generated. A single event will also be generated if the first sample after this entry becomes valid is less than or equal to this threshold and the associated alarmStartupAlarm is equal to fallingAlarm or risingOrFallingAlarm. After a falling event is generated, another such event will not be generated until the sampled value rises above this threshold and reaches the alarmRisingThreshold. This object may not be modified if the associated alarmStatus object is equal to valid.
.1.3.6.1.4.1.11.2.14.11.15.2.125.1.1.10,HPN-ICF-RMON-EXT2-MIB::hpnicfRmonExtAlarmRisingEvtIndex,Integer32,read-create,,current,,The index of the eventEntry that is used when a rising threshold is crossed. The eventEntry identified by a particular value of this index is the same as identified by the same value of the eventIndex object. If there is no corresponding entry in the eventTable, then no association exists. In particular, if this value is zero, no associated event will be generated, as zero is not a valid event index. This object may not be modified if the associated alarmStatus object is equal to valid.
.1.3.6.1.4.1.11.2.14.11.15.2.125.1.1.11,HPN-ICF-RMON-EXT2-MIB::hpnicfRmonExtAlarmFallingEvtIndex,Integer32,read-create,,current,,The index of the eventEntry that is used when a falling threshold is crossed. The eventEntry identified by a particular value of this index is the same as identified by the same value of the eventIndex object. If there is no corresponding entry in the eventTable, then no association exists. In particular, if this value is zero, no associated event will be generated, as zero is not a valid event index. This object may not be modified if the associated alarmStatus object is equal to valid.
.1.3.6.1.4.1.11.2.14.11.15.2.125.1.1.12,HPN-ICF-RMON-EXT2-MIB::hpnicfRmonExtAlarmStatCycle,Integer32,read-create,,current,,The lifetime (in seconds) starts when an alarm entry is set in valid state. If the entry has an infinite lifetime, the value of this object MUST be 0. Otherwise the value MUST be greater than the value of hpnicfRmonExtAlarmInterval. This object may not be modified if the associated alarmStatus object is equal to valid.
.1.3.6.1.4.1.11.2.14.11.15.2.125.1.1.13,HPN-ICF-RMON-EXT2-MIB::hpnicfRmonExtAlarmStatType,INTEGER,read-create,,current,forever(1):during(2),This object indicates whether the entry has an infinite or limited lifetime. This object may not be modified if the associated alarmStatus object is equal to valid.
.1.3.6.1.4.1.11.2.14.11.15.2.125.1.1.14,HPN-ICF-RMON-EXT2-MIB::hpnicfRmonExtAlarmOwner,OCTET,read-create,,current,,The entity that configured this entry and is therefore using the resources assigned to it. The defalut value of this object is zero length string.
.1.3.6.1.4.1.11.2.14.11.15.2.125.1.1.15,HPN-ICF-RMON-EXT2-MIB::hpnicfRmonExtAlarmStatus,INTEGER,read-create,,current,valid(1):createRequest(2):underCreation(3):invalid(4),The status of this alarm entry.
.1.3.6.1.4.1.11.2.14.11.15.2.126,HPN-ICF-OID-MIB::hpnicfIPsecMonitorV2,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.2.126.1,HPN-ICF-IPSEC-MONITOR-V2-MIB::hpnicfIPsecObjectsV2,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.2.126.1.1,HPN-ICF-IPSEC-MONITOR-V2-MIB::hpnicfIPsecScalarObjectsV2,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.2.126.1.1.1,HPN-ICF-IPSEC-MONITOR-V2-MIB::hpnicfIPsecMIBVersion,OCTET,read-only,,current,,Version string of this MIB.
.1.3.6.1.4.1.11.2.14.11.15.2.126.1.2,HPN-ICF-IPSEC-MONITOR-V2-MIB::hpnicfIPsecTunnelV2Table,,not-accessible,,current,,The IPsec Phase-2 Tunnel Table. There is one entry in this table for each active IPsec Phase-2 Tunnel.
.1.3.6.1.4.1.11.2.14.11.15.2.126.1.2.1,HPN-ICF-IPSEC-MONITOR-V2-MIB::hpnicfIPsecTunnelV2Entry,,not-accessible,hpnicfIPsecTunIndexV2,current,,Information about hpnicfIPsecTunnelV2Table.
.1.3.6.1.4.1.11.2.14.11.15.2.126.1.2.1.1,HPN-ICF-IPSEC-MONITOR-V2-MIB::hpnicfIPsecTunIndexV2,Integer32,accessible-for-notify,,current,,The index of IPsec Phase-2 Tunnel Table. The value of the index is a number which begins at one and is incremented with each tunnel that is created. The value of this object will wrap at 2147483647.
.1.3.6.1.4.1.11.2.14.11.15.2.126.1.2.1.2,HPN-ICF-IPSEC-MONITOR-V2-MIB::hpnicfIPsecTunIfIndexV2,Integer32,read-only,,current,,The interface index( the ifIndex of ifTable ).
.1.3.6.1.4.1.11.2.14.11.15.2.126.1.2.1.3,HPN-ICF-IPSEC-MONITOR-V2-MIB::hpnicfIPsecTunIKETunnelIndexV2,Integer32,read-only,,current,,The index of the associated IPsec Phase-1 IKE Tunnel (IKETunIndex in the IKETunnelTable). 2147483647 is defined as invalid value. 
.1.3.6.1.4.1.11.2.14.11.15.2.126.1.2.1.4,HPN-ICF-IPSEC-MONITOR-V2-MIB::hpnicfIPsecTunIKETunLocalIDTypeV2,INTEGER,read-only,,current,reserved(0):ipv4Addr(1):fqdn(2):userFqdn(3):ipv4AddrSubnet(4):ipv6Addr(5):ipv6AddrSubnet(6):ipv4AddrRange(7):ipv6AddrRange(8):derAsn1Dn(9):derAsn1Gn(10):keyId(11),The type of the local peer identity for the associated IPsec Phase-1 IKE Tunnel (IKETunLocalType in the IKETunnelTable).
.1.3.6.1.4.1.11.2.14.11.15.2.126.1.2.1.5,HPN-ICF-IPSEC-MONITOR-V2-MIB::hpnicfIPsecTunIKETunLocalIDVal1V2,OCTET,read-only,,current,,The value of the local peer identity for the associated IPsec Phase-1 IKE Tunnel (IKETunLocalValue1 in the IKETunnelTable). If the local peer type is ipv4Addr/ipv6Addr, this is the IP address used to identify the local peer. If the local peer type is ipv4AddrSubnet/ipv6AddrSubnet, this is the subnet address. If the local peer type is ipv4AddrRange/ipv6AddrRange, this is the beginning IP address of the range. If the local peer type is fqdn/userFqdn, this is the host name used to identify the local peer. If the local peer type is derAsn1Dn, this is the binary DER encoding of an ASN.1 X.500 Distinguished Name [X.501] of the principal whose certificates are being exchanged to establish the SA. If the local peer type is derAsn1Gn, this is the binary DER encoding of an ASN.1 X.500 GeneralName [X.509] of the principal whose certificates are being exchanged to establish the SA. If the local peer type is keyId, this is an opaque byte stream which may be used to pass vendor-specific information necessary to identify which pre-shared key should be used to authenticate Aggressive mode negotiations.
.1.3.6.1.4.1.11.2.14.11.15.2.126.1.2.1.6,HPN-ICF-IPSEC-MONITOR-V2-MIB::hpnicfIPsecTunIKETunLocalIDVal2V2,OCTET,read-only,,current,,The second specification of the local peer's IP address for the associated IPsec Phase-1 IKE Tunnel (IKETunLocalValue2 in the IKETunnelTable). If the local peer type is ipv4AddrSubnet/ipv6AddrSubnet, this is the subnet mask. If the local peer type is ipv4AddrRange/ipv6AddrRange, this is the ending IP address of the range. If the local peer type is others, this is a zero-length string.
.1.3.6.1.4.1.11.2.14.11.15.2.126.1.2.1.7,HPN-ICF-IPSEC-MONITOR-V2-MIB::hpnicfIPsecTunIKETunRemoteIDTypeV2,INTEGER,read-only,,current,reserved(0):ipv4Addr(1):fqdn(2):userFqdn(3):ipv4AddrSubnet(4):ipv6Addr(5):ipv6AddrSubnet(6):ipv4AddrRange(7):ipv6AddrRange(8):derAsn1Dn(9):derAsn1Gn(10):keyId(11),The type of the remote peer identity for the associated IPsec Phase-1 IKE Tunnel (IKETunRemoteType in the IKETunnelTable).
.1.3.6.1.4.1.11.2.14.11.15.2.126.1.2.1.8,HPN-ICF-IPSEC-MONITOR-V2-MIB::hpnicfIPsecTunIKETunRemoteIDVal1V2,OCTET,read-only,,current,,The value of the remote peer identity for the associated IPsec Phase-1 IKE Tunnel (IKETunRemoteValue1 in the IKETunnelTable). If the remote peer type is ipv4Addr/ipv6Addr, this is the IP address used to identify the remote peer. If the remote peer type is ipv4AddrSubnet/ipv6AddrSubnet, this is the subnet address. If the remote peer type is ipv4AddrRange/ipv6AddrRange, this is the beginning IP address of the range. If the remote peer type is fqdn/userFqdn, this is the host name used to identify the remote peer. If the remote peer type is derAsn1Dn, this is the binary DER encoding of an ASN.1 X.500 Distinguished Name [X.501] of the principal whose certificates are being exchanged to establish the SA. If the remote peer type is derAsn1Gn, this is the binary DER encoding of an ASN.1 X.500 GeneralName [X.509] of the principal whose certificates are being exchanged to establish the SA. If the remote peer type is keyId, this is an opaque byte stream which may be used to pass vendor-specific information necessary to identify which pre-shared key should be used to authenticate Aggressive mode negotiations.
.1.3.6.1.4.1.11.2.14.11.15.2.126.1.2.1.9,HPN-ICF-IPSEC-MONITOR-V2-MIB::hpnicfIPsecTunIKETunRemoteIDVal2V2,OCTET,read-only,,current,,The second specification of the remote peer's IP address for the associated IPsec Phase-1 IKE Tunnel(IKETunRemoteValue2 in the IKETunnelTable). If the remote peer type is ipv4AddrSubnet/ipv6AddrSubnet, this is the subnet mask. If the remote peer type is ipv4AddrRange/ipv6AddrRange, this is the ending IP address of the range. If the remote peer type is others, this is a zero-length string.
.1.3.6.1.4.1.11.2.14.11.15.2.126.1.2.1.10,HPN-ICF-IPSEC-MONITOR-V2-MIB::hpnicfIPsecTunLocalAddrTypeV2,INTEGER,read-only,,current,unknown(0):ipv4(1):ipv6(2):ipv4z(3):ipv6z(4):dns(16),The type of the IP address for the local peer of the IPsec Phase-2 Tunnel.
.1.3.6.1.4.1.11.2.14.11.15.2.126.1.2.1.11,HPN-ICF-IPSEC-MONITOR-V2-MIB::hpnicfIPsecTunLocalAddrV2,OCTET,read-only,,current,,The IP address of the local peer for the IPsec Phase-2 Tunnel.
.1.3.6.1.4.1.11.2.14.11.15.2.126.1.2.1.12,HPN-ICF-IPSEC-MONITOR-V2-MIB::hpnicfIPsecTunRemoteAddrTypeV2,INTEGER,read-only,,current,unknown(0):ipv4(1):ipv6(2):ipv4z(3):ipv6z(4):dns(16),The type of the IP address for the remote peer of the IPsec Phase-2 Tunnel.
.1.3.6.1.4.1.11.2.14.11.15.2.126.1.2.1.13,HPN-ICF-IPSEC-MONITOR-V2-MIB::hpnicfIPsecTunRemoteAddrV2,OCTET,read-only,,current,,The IP address of the remote peer for the IPsec Phase-2 Tunnel.
.1.3.6.1.4.1.11.2.14.11.15.2.126.1.2.1.14,HPN-ICF-IPSEC-MONITOR-V2-MIB::hpnicfIPsecTunKeyTypeV2,INTEGER,read-only,,current,ike(1):manual(2):invalidType(2147483647),The key negotiate mode used by the IPsec Phase-2 Tunnel.
.1.3.6.1.4.1.11.2.14.11.15.2.126.1.2.1.15,HPN-ICF-IPSEC-MONITOR-V2-MIB::hpnicfIPsecTunEncapModeV2,INTEGER,read-only,,current,tunnel(1):transport(2):invalidMode(2147483647),The encapsulation mode used by the IPsec Phase-2 Tunnel.
.1.3.6.1.4.1.11.2.14.11.15.2.126.1.2.1.16,HPN-ICF-IPSEC-MONITOR-V2-MIB::hpnicfIPsecTunInitiatorV2,INTEGER,read-only,,current,local(1):remote(2):none(2147483647),The initiator of this IPsec tunnel. Value none is used for manual IPsec tunnel, for there is no initiator or responder in this method.
.1.3.6.1.4.1.11.2.14.11.15.2.126.1.2.1.17,HPN-ICF-IPSEC-MONITOR-V2-MIB::hpnicfIPsecTunLifeSizeV2,Gauge32,read-only,,current,,The negotiated LifeSize of the IPsec Phase-2 Tunnel in kilobytes. 0 is defined as invalid value.
.1.3.6.1.4.1.11.2.14.11.15.2.126.1.2.1.18,HPN-ICF-IPSEC-MONITOR-V2-MIB::hpnicfIPsecTunLifeTimeV2,Integer32,read-only,,current,,The negotiated LifeTime of the IPsec Phase-2 Tunnel in seconds. 2147483647 is defined as invalid value.
.1.3.6.1.4.1.11.2.14.11.15.2.126.1.2.1.19,HPN-ICF-IPSEC-MONITOR-V2-MIB::hpnicfIPsecTunRemainTimeV2,Integer32,read-only,,current,,The remain time of SA in seconds. 2147483647 is defined as invalid value.
.1.3.6.1.4.1.11.2.14.11.15.2.126.1.2.1.20,HPN-ICF-IPSEC-MONITOR-V2-MIB::hpnicfIPsecTunActiveTimeV2,Integer32,read-only,,current,,The duration the IPsec Phase-2 Tunnel has been active in hundredths of seconds. 2147483647 is defined as invalid value.
.1.3.6.1.4.1.11.2.14.11.15.2.126.1.2.1.21,HPN-ICF-IPSEC-MONITOR-V2-MIB::hpnicfIPsecTunRemainSizeV2,Gauge32,read-only,,current,,The remain LifeSize of SA in kilobytes. 0 is defined as invalid value.
.1.3.6.1.4.1.11.2.14.11.15.2.126.1.2.1.22,HPN-ICF-IPSEC-MONITOR-V2-MIB::hpnicfIPsecTunTotalRefreshesV2,Counter32,read-only,,current,,The total number of security association refreshing performed.
.1.3.6.1.4.1.11.2.14.11.15.2.126.1.2.1.23,HPN-ICF-IPSEC-MONITOR-V2-MIB::hpnicfIPsecTunCurrentSaInstancesV2,Gauge32,read-only,,current,,The number of security associations which are currently active or expiring.
.1.3.6.1.4.1.11.2.14.11.15.2.126.1.2.1.24,HPN-ICF-IPSEC-MONITOR-V2-MIB::hpnicfIPsecTunInSaEncryptAlgoV2,INTEGER,read-only,,current,none(0):desCbc(1):ideaCbc(2):blowfishCbc(3):rc5R16B64Cbc(4):tripleDesCbc(5):castCbc(6):aesCbc(7):nsaCbc(8):aesCbc128(9):aesCbc192(10):aesCbc256(11):aesCtr(12):aesCamelliaCbc(13):rc4(14):invalidAlg(2147483647),The encryption algorithm used by the inbound security association of the IPsec Phase-2 Tunnel.
.1.3.6.1.4.1.11.2.14.11.15.2.126.1.2.1.25,HPN-ICF-IPSEC-MONITOR-V2-MIB::hpnicfIPsecTunInSaAhAuthAlgoV2,INTEGER,read-only,,current,none(0):md5(1):sha1(2):sha256(3):sha384(4):sha512(5):invalidAlg(2147483647),The authentication algorithm used by the inbound authentication header (AH) security association of the IPsec Phase-2 Tunnel.
.1.3.6.1.4.1.11.2.14.11.15.2.126.1.2.1.26,HPN-ICF-IPSEC-MONITOR-V2-MIB::hpnicfIPsecTunInSaEspAuthAlgoV2,INTEGER,read-only,,current,none(0):md5(1):sha1(2):sha256(3):sha384(4):sha512(5):invalidAlg(2147483647),The authentication algorithm used by the inbound encapsulation security protocol(ESP) security association of the IPsec Phase-2 Tunnel.
.1.3.6.1.4.1.11.2.14.11.15.2.126.1.2.1.27,HPN-ICF-IPSEC-MONITOR-V2-MIB::hpnicfIPsecTunDiffHellmanGrpV2,INTEGER,read-only,,current,none(0):dhGroup1(1):dhGroup2(2):dhGroup5(5):dhGroup14(14):dhGroup24(24):invalidGroup(2147483647),The Diffie Hellman Group used by the security association of the IPsec Phase-2 Tunnel.
.1.3.6.1.4.1.11.2.14.11.15.2.126.1.2.1.28,HPN-ICF-IPSEC-MONITOR-V2-MIB::hpnicfIPsecTunOutSaEncryptAlgoV2,INTEGER,read-only,,current,none(0):desCbc(1):ideaCbc(2):blowfishCbc(3):rc5R16B64Cbc(4):tripleDesCbc(5):castCbc(6):aesCbc(7):nsaCbc(8):aesCbc128(9):aesCbc192(10):aesCbc256(11):aesCtr(12):aesCamelliaCbc(13):rc4(14):invalidAlg(2147483647),The encryption algorithm used by the outbound security association of the IPsec Phase-2 Tunnel.
.1.3.6.1.4.1.11.2.14.11.15.2.126.1.2.1.29,HPN-ICF-IPSEC-MONITOR-V2-MIB::hpnicfIPsecTunOutSaAhAuthAlgoV2,INTEGER,read-only,,current,none(0):md5(1):sha1(2):sha256(3):sha384(4):sha512(5):invalidAlg(2147483647),The authentication algorithm used by the outbound authentication header (AH) security association of the IPsec Phase-2 Tunnel.
.1.3.6.1.4.1.11.2.14.11.15.2.126.1.2.1.30,HPN-ICF-IPSEC-MONITOR-V2-MIB::hpnicfIPsecTunOutSaEspAuthAlgoV2,INTEGER,read-only,,current,none(0):md5(1):sha1(2):sha256(3):sha384(4):sha512(5):invalidAlg(2147483647),The authentication algorithm used by the outbound encapsulation security protocol(ESP) security association of the IPsec Phase-2 Tunnel.
.1.3.6.1.4.1.11.2.14.11.15.2.126.1.2.1.31,HPN-ICF-IPSEC-MONITOR-V2-MIB::hpnicfIPsecTunPolicyNameV2,OCTET,read-only,,current,,The policy name used by this IPsec tunnel.
.1.3.6.1.4.1.11.2.14.11.15.2.126.1.2.1.32,HPN-ICF-IPSEC-MONITOR-V2-MIB::hpnicfIPsecTunPolicyNumV2,Integer32,read-only,,current,,The sequence number of policy used by this IPsec tunnel.
.1.3.6.1.4.1.11.2.14.11.15.2.126.1.2.1.33,HPN-ICF-IPSEC-MONITOR-V2-MIB::hpnicfIPsecTunStatusV2,INTEGER,read-only,,current,initial(1):ready(2):rekeyed(3):closed(4),The status of the IPsec Tunnel.
.1.3.6.1.4.1.11.2.14.11.15.2.126.1.3,HPN-ICF-IPSEC-MONITOR-V2-MIB::hpnicfIPsecTunnelStatV2Table,,not-accessible,,current,,The IPsec Phase-2 Tunnel Statistics Table. 
.1.3.6.1.4.1.11.2.14.11.15.2.126.1.3.1,HPN-ICF-IPSEC-MONITOR-V2-MIB::hpnicfIPsecTunnelStatV2Entry,,not-accessible,hpnicfIPsecTunIndexV2,current,,Information about hpnicfIPsecTunnelStatV2Table.
.1.3.6.1.4.1.11.2.14.11.15.2.126.1.3.1.1,HPN-ICF-IPSEC-MONITOR-V2-MIB::hpnicfIPsecTunInOctetsV2,Counter64,read-only,,current,,The total number of octets received by this IPsec Phase-2 Tunnel. This value is accumulated BEFORE determining whether or not the packet should be decompressed.
.1.3.6.1.4.1.11.2.14.11.15.2.126.1.3.1.2,HPN-ICF-IPSEC-MONITOR-V2-MIB::hpnicfIPsecTunInDecompOctetsV2,Counter64,read-only,,current,,The total number of decompressed octets received by this IPsec Phase-2 Tunnel. This value is accumulated AFTER the packet is decompressed.
.1.3.6.1.4.1.11.2.14.11.15.2.126.1.3.1.3,HPN-ICF-IPSEC-MONITOR-V2-MIB::hpnicfIPsecTunInPktsV2,Counter64,read-only,,current,,The total number of packets received by this IPsec Phase-2 Tunnel.
.1.3.6.1.4.1.11.2.14.11.15.2.126.1.3.1.4,HPN-ICF-IPSEC-MONITOR-V2-MIB::hpnicfIPsecTunInDropPktsV2,Counter64,read-only,,current,,The total number of packets dropped during receiving process by this IPsec Phase-2 Tunnel.
.1.3.6.1.4.1.11.2.14.11.15.2.126.1.3.1.5,HPN-ICF-IPSEC-MONITOR-V2-MIB::hpnicfIPsecTunInReplayDropPktsV2,Counter64,read-only,,current,,The total number of packets dropped during receiving process due to Anti-Replay process by this IPsec Phase-2 Tunnel.
.1.3.6.1.4.1.11.2.14.11.15.2.126.1.3.1.6,HPN-ICF-IPSEC-MONITOR-V2-MIB::hpnicfIPsecTunInAuthFailsV2,Counter64,read-only,,current,,The total number of inbound authentication's which ended in failure by this IPsec Phase-2 Tunnel.
.1.3.6.1.4.1.11.2.14.11.15.2.126.1.3.1.7,HPN-ICF-IPSEC-MONITOR-V2-MIB::hpnicfIPsecTunInDecryptFailsV2,Counter64,read-only,,current,,The total number of inbound decryption's which ended in failure by this IPsec Phase-2 Tunnel.
.1.3.6.1.4.1.11.2.14.11.15.2.126.1.3.1.8,HPN-ICF-IPSEC-MONITOR-V2-MIB::hpnicfIPsecTunOutOctetsV2,Counter64,read-only,,current,,The total number of octets sent by this IPsec Phase-2 Tunnel. This value is accumulated AFTER determining whether or not the packet should be compressed.
.1.3.6.1.4.1.11.2.14.11.15.2.126.1.3.1.9,HPN-ICF-IPSEC-MONITOR-V2-MIB::hpnicfIPsecTunOutUncompOctetsV2,Counter64,read-only,,current,,The total number of uncompressed octets sent by this IPsec Phase-2 Tunnel. This value is accumulated BEFORE the packet is compressed.
.1.3.6.1.4.1.11.2.14.11.15.2.126.1.3.1.10,HPN-ICF-IPSEC-MONITOR-V2-MIB::hpnicfIPsecTunOutPktsV2,Counter64,read-only,,current,,The total number of packets sent by this IPsec Phase-2 Tunnel.
.1.3.6.1.4.1.11.2.14.11.15.2.126.1.3.1.11,HPN-ICF-IPSEC-MONITOR-V2-MIB::hpnicfIPsecTunOutDropPktsV2,Counter64,read-only,,current,,The total number of packets dropped during sending process by this IPsec Phase-2 Tunnel.
.1.3.6.1.4.1.11.2.14.11.15.2.126.1.3.1.12,HPN-ICF-IPSEC-MONITOR-V2-MIB::hpnicfIPsecTunOutEncryptFailsV2,Counter64,read-only,,current,,The total number of outbound encryption's which ended in failure by this IPsec Phase-2 Tunnel.
.1.3.6.1.4.1.11.2.14.11.15.2.126.1.3.1.13,HPN-ICF-IPSEC-MONITOR-V2-MIB::hpnicfIPsecTunNoMemoryDropPktsV2,Counter64,read-only,,current,,The total number of packets dropped due to no enough memory by this IPsec Phase-2 Tunnel.
.1.3.6.1.4.1.11.2.14.11.15.2.126.1.3.1.14,HPN-ICF-IPSEC-MONITOR-V2-MIB::hpnicfIPsecTunQueueFullDropPktsV2,Counter64,read-only,,current,,The total number of packets dropped due to queue full by this IPsec Phase-2 Tunnel.
.1.3.6.1.4.1.11.2.14.11.15.2.126.1.3.1.15,HPN-ICF-IPSEC-MONITOR-V2-MIB::hpnicfIPsecTunInvalidLenDropPktsV2,Counter64,read-only,,current,,The total number of packets dropped due to invalid length packet by this IPsec Phase-2 Tunnel.
.1.3.6.1.4.1.11.2.14.11.15.2.126.1.3.1.16,HPN-ICF-IPSEC-MONITOR-V2-MIB::hpnicfIPsecTunTooLongDropPktsV2,Counter64,read-only,,current,,The total number of packets dropped due to too long packet by this IPsec Phase-2 Tunnel.
.1.3.6.1.4.1.11.2.14.11.15.2.126.1.3.1.17,HPN-ICF-IPSEC-MONITOR-V2-MIB::hpnicfIPsecTunInvalidSaDropPktsV2,Counter64,read-only,,current,,The total number of packets dropped due to invalid SA by this IPsec Phase-2 Tunnel.
.1.3.6.1.4.1.11.2.14.11.15.2.126.1.4,HPN-ICF-IPSEC-MONITOR-V2-MIB::hpnicfIPsecSaV2Table,,not-accessible,,current,,The IPsec Phase-2 Security Protection Index Table. This table contains an entry for each active and expiring security association.
.1.3.6.1.4.1.11.2.14.11.15.2.126.1.4.1,HPN-ICF-IPSEC-MONITOR-V2-MIB::hpnicfIPsecSaV2Entry,,not-accessible,hpnicfIPsecTunIndexV2:hpnicfIPsecSaIndexV2,current,,Information about hpnicfIPsecSaV2Table.
.1.3.6.1.4.1.11.2.14.11.15.2.126.1.4.1.1,HPN-ICF-IPSEC-MONITOR-V2-MIB::hpnicfIPsecSaIndexV2,Integer32,accessible-for-notify,,current,,The number of the Sa associated with the Phase-2 Tunnel Table. The value of this index is a number which begins at one and is incremented with each Sa associated with an IPsec Phase-2 Tunnel. The value of this object will wrap at 2,147,483,647.
.1.3.6.1.4.1.11.2.14.11.15.2.126.1.4.1.2,HPN-ICF-IPSEC-MONITOR-V2-MIB::hpnicfIPsecSaDirectionV2,INTEGER,read-only,,current,in(1):out(2),The direction of the SA.
.1.3.6.1.4.1.11.2.14.11.15.2.126.1.4.1.3,HPN-ICF-IPSEC-MONITOR-V2-MIB::hpnicfIPsecSaSpiValueV2,Unsigned32,read-only,,current,,The value of the SPI.
.1.3.6.1.4.1.11.2.14.11.15.2.126.1.4.1.4,HPN-ICF-IPSEC-MONITOR-V2-MIB::hpnicfIPsecSaSecProtocolV2,INTEGER,read-only,,current,reserved(0):ah(2):esp(3):ipcomp(4),The security protocol of the SA.
.1.3.6.1.4.1.11.2.14.11.15.2.126.1.4.1.5,HPN-ICF-IPSEC-MONITOR-V2-MIB::hpnicfIPsecSaEncryptAlgoV2,INTEGER,read-only,,current,none(0):desCbc(1):ideaCbc(2):blowfishCbc(3):rc5R16B64Cbc(4):tripleDesCbc(5):castCbc(6):aesCbc(7):nsaCbc(8):aesCbc128(9):aesCbc192(10):aesCbc256(11):aesCtr(12):aesCamelliaCbc(13):rc4(14):invalidAlg(2147483647),The encryption algorithm used by the security association of the IPsec Phase-2 Tunnel.
.1.3.6.1.4.1.11.2.14.11.15.2.126.1.4.1.6,HPN-ICF-IPSEC-MONITOR-V2-MIB::hpnicfIPsecSaAuthAlgoV2,INTEGER,read-only,,current,none(0):md5(1):sha1(2):sha256(3):sha384(4):sha512(5):invalidAlg(2147483647),The authentication algorithm used by the SA.
.1.3.6.1.4.1.11.2.14.11.15.2.126.1.4.1.7,HPN-ICF-IPSEC-MONITOR-V2-MIB::hpnicfIPsecSaStatusV2,INTEGER,read-only,,current,active(1):expiring(2),The status of the SA.
.1.3.6.1.4.1.11.2.14.11.15.2.126.1.5,HPN-ICF-IPSEC-MONITOR-V2-MIB::hpnicfIPsecTrafficV2Table,,not-accessible,,current,,The IPsec Phase-2 Tunnel Traffic Table. 
.1.3.6.1.4.1.11.2.14.11.15.2.126.1.5.1,HPN-ICF-IPSEC-MONITOR-V2-MIB::hpnicfIPsecTrafficV2Entry,,not-accessible,hpnicfIPsecTunIndexV2,current,,Information about hpnicfIPsecTrafficV2Table.
.1.3.6.1.4.1.11.2.14.11.15.2.126.1.5.1.1,HPN-ICF-IPSEC-MONITOR-V2-MIB::hpnicfIPsecTrafficLocalTypeV2,INTEGER,read-only,,current,ipv4Addr(1):ipv4AddrSubnet(4):ipv6Addr(5):ipv6AddrSubnet(6):ipv4AddrRange(7):ipv6AddrRange(8),The type of the local peer's traffic. Possible values are: 1) A single IP address 2) An IP address range 3) An IP subnet
.1.3.6.1.4.1.11.2.14.11.15.2.126.1.5.1.2,HPN-ICF-IPSEC-MONITOR-V2-MIB::hpnicfIPsecTrafficLocalAddr1TypeV2,INTEGER,read-only,,current,unknown(0):ipv4(1):ipv6(2):ipv4z(3):ipv6z(4):dns(16),The type of the first IP address specification for the local peer's traffic.
.1.3.6.1.4.1.11.2.14.11.15.2.126.1.5.1.3,HPN-ICF-IPSEC-MONITOR-V2-MIB::hpnicfIPsecTrafficLocalAddr1V2,OCTET,read-only,,current,,The first IP address specification of the local peer's traffic. If the local peer's traffic type is single IP address, this is the IP address. If the local peer's traffic type is IP subnet, this is the subnet address. If the local peer's traffic type is IP address range, this is the beginning IP address of the range.
.1.3.6.1.4.1.11.2.14.11.15.2.126.1.5.1.4,HPN-ICF-IPSEC-MONITOR-V2-MIB::hpnicfIPsecTrafficLocalAddr2TypeV2,INTEGER,read-only,,current,unknown(0):ipv4(1):ipv6(2):ipv4z(3):ipv6z(4):dns(16),The type of the second IP address specification for the local peer's traffic.
.1.3.6.1.4.1.11.2.14.11.15.2.126.1.5.1.5,HPN-ICF-IPSEC-MONITOR-V2-MIB::hpnicfIPsecTrafficLocalAddr2V2,OCTET,read-only,,current,,The second IP address specification of the local peer's traffic. If the local peer's traffic type is single IP address, this is the IP address. If the local peer's traffic type is IP subnet, this is the subnet mask. If the local peer's traffic type is IP address range, this is the ending IP address of the range.
.1.3.6.1.4.1.11.2.14.11.15.2.126.1.5.1.6,HPN-ICF-IPSEC-MONITOR-V2-MIB::hpnicfIPsecTrafficLocalProtocol1V2,Integer32,read-only,,current,,The first protocol number specification of the local peer's traffic. If the protocol type of the local peer's traffic is single protocol, this is the protocol number. If the protocol type of the local peer's traffic is protocol range, this is the beginning protocol number of the range.
.1.3.6.1.4.1.11.2.14.11.15.2.126.1.5.1.7,HPN-ICF-IPSEC-MONITOR-V2-MIB::hpnicfIPsecTrafficLocalProtocol2V2,Integer32,read-only,,current,,The second protocol number specification of the local peer's traffic. If the protocol type of the local peer's traffic is single protocol, this is the protocol number. If the protocol type of the local peer's traffic is protocol range, this is the ending protocol number of the range.
.1.3.6.1.4.1.11.2.14.11.15.2.126.1.5.1.8,HPN-ICF-IPSEC-MONITOR-V2-MIB::hpnicfIPsecTrafficLocalPort1V2,Integer32,read-only,,current,,The first port number specification of the local peer's traffic. If the port type of the local peer's traffic is single port, this is the port number. If the port type of the local peer's traffic is port range, this is the beginning port number of the range.
.1.3.6.1.4.1.11.2.14.11.15.2.126.1.5.1.9,HPN-ICF-IPSEC-MONITOR-V2-MIB::hpnicfIPsecTrafficLocalPort2V2,Integer32,read-only,,current,,The second port number specification of the local peer's traffic. If the port type of the local peer's traffic is single port, this is the port number. If the port type of the local peer's traffic is port range, this is the ending port number of the range.
.1.3.6.1.4.1.11.2.14.11.15.2.126.1.5.1.10,HPN-ICF-IPSEC-MONITOR-V2-MIB::hpnicfIPsecTrafficRemoteTypeV2,INTEGER,read-only,,current,ipv4Addr(1):ipv4AddrSubnet(4):ipv6Addr(5):ipv6AddrSubnet(6):ipv4AddrRange(7):ipv6AddrRange(8),The type of the remote peer's traffic. Possible values are: 1) A single IP address 2) An IP address range 3) An IP subnet
.1.3.6.1.4.1.11.2.14.11.15.2.126.1.5.1.11,HPN-ICF-IPSEC-MONITOR-V2-MIB::hpnicfIPsecTrafficRemAddr1TypeV2,INTEGER,read-only,,current,unknown(0):ipv4(1):ipv6(2):ipv4z(3):ipv6z(4):dns(16),The type of the first IP address specification for the remote peer's traffic.
.1.3.6.1.4.1.11.2.14.11.15.2.126.1.5.1.12,HPN-ICF-IPSEC-MONITOR-V2-MIB::hpnicfIPsecTrafficRemAddr1V2,OCTET,read-only,,current,,The first IP address specification of the remote peer's traffic. If the remote traffic type is single IP address, this is the IP address. If the remote traffic type is IP subnet, this is the subnet address. If the remote traffic type is IP address range, this is the beginning IP address of the range.
.1.3.6.1.4.1.11.2.14.11.15.2.126.1.5.1.13,HPN-ICF-IPSEC-MONITOR-V2-MIB::hpnicfIPsecTrafficRemAddr2TypeV2,INTEGER,read-only,,current,unknown(0):ipv4(1):ipv6(2):ipv4z(3):ipv6z(4):dns(16),The type of the second IP address specification for the remote peer's traffic.
.1.3.6.1.4.1.11.2.14.11.15.2.126.1.5.1.14,HPN-ICF-IPSEC-MONITOR-V2-MIB::hpnicfIPsecTrafficRemAddr2V2,OCTET,read-only,,current,,The second IP address specification of the remote peer's traffic. If the remote traffic type is single IP address, this is the IP address. If the remote traffic type is IP subnet, this is the subnet mask. If the remote traffic type is IP address range, this is the ending IP address of the range.
.1.3.6.1.4.1.11.2.14.11.15.2.126.1.5.1.15,HPN-ICF-IPSEC-MONITOR-V2-MIB::hpnicfIPsecTrafficRemoPro1V2,Integer32,read-only,,current,,The first protocol number specification of the remote peer's traffic. If the protocol type of the remote peer's traffic is single protocol, this is the protocol number. If the protocol type of the remote peer's traffic is protocol range, this is the beginning protocol number of the range.
.1.3.6.1.4.1.11.2.14.11.15.2.126.1.5.1.16,HPN-ICF-IPSEC-MONITOR-V2-MIB::hpnicfIPsecTrafficRemoPro2V2,Integer32,read-only,,current,,The second protocol number specification of the remote peer's traffic. If the protocol type of the remote peer's traffic is single protocol, this is the protocol number. If the protocol type of the remote peer's traffic is protocol range, this is the ending protocol number of the range.
.1.3.6.1.4.1.11.2.14.11.15.2.126.1.5.1.17,HPN-ICF-IPSEC-MONITOR-V2-MIB::hpnicfIPsecTrafficRemPort1V2,Integer32,read-only,,current,,The first port number specification of the remote peer's traffic. If the port type of the remote peer's traffic is single port, this is the port number. If the port type of the remote peer's traffic is port range, this is the beginning port number of the range.
.1.3.6.1.4.1.11.2.14.11.15.2.126.1.5.1.18,HPN-ICF-IPSEC-MONITOR-V2-MIB::hpnicfIPsecTrafficRemPort2V2,Integer32,read-only,,current,,The second port number specification of the remote peer's traffic. If the port type of the remote peer's traffic is single port, this is the port number. If the port type of the remote peer's traffic is port range, this is the ending port number of the range.
.1.3.6.1.4.1.11.2.14.11.15.2.126.1.6,HPN-ICF-IPSEC-MONITOR-V2-MIB::hpnicfIPsecGlobalStatsV2,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.2.126.1.6.1,HPN-ICF-IPSEC-MONITOR-V2-MIB::hpnicfIPsecGlobalActiveTunnelsV2,Gauge32,read-only,,current,,The total number of currently active IPsec Phase-2 Tunnels.
.1.3.6.1.4.1.11.2.14.11.15.2.126.1.6.2,HPN-ICF-IPSEC-MONITOR-V2-MIB::hpnicfIPsecGlobalActiveSasV2,Gauge32,read-only,,current,,The total number of currently active or expiring IPsec Phase-2 SA.
.1.3.6.1.4.1.11.2.14.11.15.2.126.1.6.3,HPN-ICF-IPSEC-MONITOR-V2-MIB::hpnicfIPsecGlobalInOctetsV2,Counter64,read-only,,current,,The total number of octets received by all current and previous IPsec Phase-2 Tunnels. This value is accumulated BEFORE determining whether or not the packet should be decompressed.
.1.3.6.1.4.1.11.2.14.11.15.2.126.1.6.4,HPN-ICF-IPSEC-MONITOR-V2-MIB::hpnicfIPsecGlobalInDecompOctetsV2,Counter64,read-only,,current,,The total number of decompressed octets received by all current and previous IPsec Phase-2 Tunnels. This value is accumulated AFTER the packet is decompressed.
.1.3.6.1.4.1.11.2.14.11.15.2.126.1.6.5,HPN-ICF-IPSEC-MONITOR-V2-MIB::hpnicfIPsecGlobalInPktsV2,Counter64,read-only,,current,,The total number of packets received by all current and previous IPsec Phase-2 Tunnels.
.1.3.6.1.4.1.11.2.14.11.15.2.126.1.6.6,HPN-ICF-IPSEC-MONITOR-V2-MIB::hpnicfIPsecGlobalInDropsV2,Counter64,read-only,,current,,The total number of packets dropped during receiving process by all current and previous IPsec Phase-2 Tunnels. 
.1.3.6.1.4.1.11.2.14.11.15.2.126.1.6.7,HPN-ICF-IPSEC-MONITOR-V2-MIB::hpnicfIPsecGlobalInReplayDropsV2,Counter64,read-only,,current,,The total number of packets dropped during receiving process due to Anti-Replay process by all current and previous IPsec Phase-2 Tunnels.
.1.3.6.1.4.1.11.2.14.11.15.2.126.1.6.8,HPN-ICF-IPSEC-MONITOR-V2-MIB::hpnicfIPsecGlobalInAuthFailsV2,Counter64,read-only,,current,,The total number of inbound authentication's which ended in failure by all current and previous IPsec Phase-2 Tunnels.
.1.3.6.1.4.1.11.2.14.11.15.2.126.1.6.9,HPN-ICF-IPSEC-MONITOR-V2-MIB::hpnicfIPsecGlobalInDecryptFailsV2,Counter64,read-only,,current,,The total number of inbound decryption's which ended in failure by all current and previous IPsec Phase-2 Tunnels.
.1.3.6.1.4.1.11.2.14.11.15.2.126.1.6.10,HPN-ICF-IPSEC-MONITOR-V2-MIB::hpnicfIPsecGlobalOutOctetsV2,Counter64,read-only,,current,,The total number of octets sent by all current and previous IPsec Phase-2 Tunnels. This value is accumulated AFTER determining whether or not the packet should be compressed.
.1.3.6.1.4.1.11.2.14.11.15.2.126.1.6.11,HPN-ICF-IPSEC-MONITOR-V2-MIB::hpnicfIPsecGlobalOutUncompOctetsV2,Counter64,read-only,,current,,The total number of uncompressed octets sent by all current and previous IPsec Phase-2 Tunnels. This value is accumulated BEFORE the packet is compressed.
.1.3.6.1.4.1.11.2.14.11.15.2.126.1.6.12,HPN-ICF-IPSEC-MONITOR-V2-MIB::hpnicfIPsecGlobalOutPktsV2,Counter64,read-only,,current,,The total number of packets sent by all current and previous IPsec Phase-2 Tunnels.
.1.3.6.1.4.1.11.2.14.11.15.2.126.1.6.13,HPN-ICF-IPSEC-MONITOR-V2-MIB::hpnicfIPsecGlobalOutDropsV2,Counter64,read-only,,current,,The total number of packets dropped during sending process by all current and previous IPsec Phase-2 Tunnels.
.1.3.6.1.4.1.11.2.14.11.15.2.126.1.6.14,HPN-ICF-IPSEC-MONITOR-V2-MIB::hpnicfIPsecGlobalOutEncryptFailsV2,Counter64,read-only,,current,,The total number of outbound encryption's which ended in failure by all current and previous IPsec Phase-2 Tunnels.
.1.3.6.1.4.1.11.2.14.11.15.2.126.1.6.15,HPN-ICF-IPSEC-MONITOR-V2-MIB::hpnicfIPsecGlobalNoMemoryDropsV2,Counter64,read-only,,current,,The total number of packets dropped due to no enough memory by all current and previous IPsec Phase-2 Tunnels.
.1.3.6.1.4.1.11.2.14.11.15.2.126.1.6.16,HPN-ICF-IPSEC-MONITOR-V2-MIB::hpnicfIPsecGlobalNoFindSaDropsV2,Counter64,read-only,,current,,The total number of packets dropped due to not find SA by all current and previous IPsec Phase-2 Tunnels.
.1.3.6.1.4.1.11.2.14.11.15.2.126.1.6.17,HPN-ICF-IPSEC-MONITOR-V2-MIB::hpnicfIPsecGlobalQueueFullDropsV2,Counter64,read-only,,current,,The total number of packets dropped due to queue full by all current and previous IPsec Phase-2 Tunnels.
.1.3.6.1.4.1.11.2.14.11.15.2.126.1.6.18,HPN-ICF-IPSEC-MONITOR-V2-MIB::hpnicfIPsecGlobalInvalidLenDropsV2,Counter64,read-only,,current,,The total number of packets dropped due to invalid packet length by all current and previous IPsec Phase-2 Tunnels.
.1.3.6.1.4.1.11.2.14.11.15.2.126.1.6.19,HPN-ICF-IPSEC-MONITOR-V2-MIB::hpnicfIPsecGlobalTooLongDropsV2,Counter64,read-only,,current,,The total number of packets dropped due to too long packet by all current and previous IPsec Phase-2 Tunnels.
.1.3.6.1.4.1.11.2.14.11.15.2.126.1.6.20,HPN-ICF-IPSEC-MONITOR-V2-MIB::hpnicfIPsecGlobalInvalidSaDropsV2,Counter64,read-only,,current,,The total number of packets dropped due to invalid SA by all current and previous IPsec Phase-2 Tunnels.
.1.3.6.1.4.1.11.2.14.11.15.2.126.1.7,HPN-ICF-IPSEC-MONITOR-V2-MIB::hpnicfIPsecTrapObjectV2,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.2.126.1.7.1,HPN-ICF-IPSEC-MONITOR-V2-MIB::hpnicfIPsecPolicyNameV2,OCTET,accessible-for-notify,,current,,The IPsec policy name with a trap.
.1.3.6.1.4.1.11.2.14.11.15.2.126.1.7.2,HPN-ICF-IPSEC-MONITOR-V2-MIB::hpnicfIPsecPolicySeqNumV2,Integer32,accessible-for-notify,,current,,The IPsec policy sequence number with a trap.
.1.3.6.1.4.1.11.2.14.11.15.2.126.1.7.3,HPN-ICF-IPSEC-MONITOR-V2-MIB::hpnicfIPsecPolicySizeV2,Integer32,accessible-for-notify,,current,,The number of IPsec policies with a trap.
.1.3.6.1.4.1.11.2.14.11.15.2.126.1.8,HPN-ICF-IPSEC-MONITOR-V2-MIB::hpnicfIPsecTrapCntlV2,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.2.126.1.8.1,HPN-ICF-IPSEC-MONITOR-V2-MIB::hpnicfIPsecTrapGlobalCntlV2,INTEGER,read-write,,current,true(1):false(2),Indicates whether all IPsec traps should be generated.
.1.3.6.1.4.1.11.2.14.11.15.2.126.1.8.2,HPN-ICF-IPSEC-MONITOR-V2-MIB::hpnicfIPsecTunnelStartTrapCntlV2,INTEGER,read-write,,current,true(1):false(2),Indicates whether hpnicfIPsecTunnelStartV2 traps should be generated.
.1.3.6.1.4.1.11.2.14.11.15.2.126.1.8.3,HPN-ICF-IPSEC-MONITOR-V2-MIB::hpnicfIPsecTunnelStopTrapCntlV2,INTEGER,read-write,,current,true(1):false(2),Indicates whether hpnicfIPsecTunnelStopV2 traps should be generated.
.1.3.6.1.4.1.11.2.14.11.15.2.126.1.8.4,HPN-ICF-IPSEC-MONITOR-V2-MIB::hpnicfIPsecNoSaTrapCntlV2,INTEGER,read-write,,current,true(1):false(2),Indicates whether hpnicfIPsecNoSaFailureV2 traps should be generated.
.1.3.6.1.4.1.11.2.14.11.15.2.126.1.8.5,HPN-ICF-IPSEC-MONITOR-V2-MIB::hpnicfIPsecAuthFailureTrapCntlV2,INTEGER,read-write,,current,true(1):false(2),Indicates whether hpnicfIPsecAuthFailFailureV2 traps should be generated.
.1.3.6.1.4.1.11.2.14.11.15.2.126.1.8.6,HPN-ICF-IPSEC-MONITOR-V2-MIB::hpnicfIPsecEncryFailureTrapCntlV2,INTEGER,read-write,,current,true(1):false(2),Indicates whether hpnicfIPsecEncryFailFailureV2 traps should be generated.
.1.3.6.1.4.1.11.2.14.11.15.2.126.1.8.7,HPN-ICF-IPSEC-MONITOR-V2-MIB::hpnicfIPsecDecryFailureTrapCntlV2,INTEGER,read-write,,current,true(1):false(2),Indicates whether hpnicfIPsecDecryFailFailureV2 traps should be generated.
.1.3.6.1.4.1.11.2.14.11.15.2.126.1.8.8,HPN-ICF-IPSEC-MONITOR-V2-MIB::hpnicfIPsecInvalidSaTrapCntlV2,INTEGER,read-write,,current,true(1):false(2),Indicates whether hpnicfIPsecInvalidSaFailureV2 traps should be generated.
.1.3.6.1.4.1.11.2.14.11.15.2.126.1.8.9,HPN-ICF-IPSEC-MONITOR-V2-MIB::hpnicfIPsecPolicyAddTrapCntlV2,INTEGER,read-write,,current,true(1):false(2),Indicates whether hpnicfIPsecPolicyAddV2 traps should be generated.
.1.3.6.1.4.1.11.2.14.11.15.2.126.1.8.10,HPN-ICF-IPSEC-MONITOR-V2-MIB::hpnicfIPsecPolicyDelTrapCntlV2,INTEGER,read-write,,current,true(1):false(2),Indicates whether hpnicfIPsecPolicyDelV2 traps should be generated.
.1.3.6.1.4.1.11.2.14.11.15.2.126.1.8.11,HPN-ICF-IPSEC-MONITOR-V2-MIB::hpnicfIPsecPolicyAttachTrapCntlV2,INTEGER,read-write,,current,true(1):false(2),Indicates whether hpnicfIPsecPolicyAttachV2 traps should be generated.
.1.3.6.1.4.1.11.2.14.11.15.2.126.1.8.12,HPN-ICF-IPSEC-MONITOR-V2-MIB::hpnicfIPsecPolicyDetachTrapCntlV2,INTEGER,read-write,,current,true(1):false(2),Indicates whether hpnicfIPsecPolicyDetachV2 traps should be generated.
.1.3.6.1.4.1.11.2.14.11.15.2.126.1.9,HPN-ICF-IPSEC-MONITOR-V2-MIB::hpnicfIPsecTrapV2,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.2.126.1.9.0,HPN-ICF-IPSEC-MONITOR-V2-MIB::hpnicfIPsecNotificationsV2,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.2.126.1.9.0.1,HPN-ICF-IPSEC-MONITOR-V2-MIB::hpnicfIPsecTunnelStartV2,,,,,,This notification is generated when an IPsec Phase-2 Tunnel is created.
.1.3.6.1.4.1.11.2.14.11.15.2.126.1.9.0.2,HPN-ICF-IPSEC-MONITOR-V2-MIB::hpnicfIPsecTunnelStopV2,,,,,,This notification is generated when an IPsec Phase-2 Tunnel is deleted.
.1.3.6.1.4.1.11.2.14.11.15.2.126.1.9.0.3,HPN-ICF-IPSEC-MONITOR-V2-MIB::hpnicfIPsecNoSaFailureV2,,,,,,This notification is generated when an IPsec Phase-2 non-existent SA error occurs.
.1.3.6.1.4.1.11.2.14.11.15.2.126.1.9.0.4,HPN-ICF-IPSEC-MONITOR-V2-MIB::hpnicfIPsecAuthFailFailureV2,,,,,,This notification is generated when the IPsec phase-2 authentication failure occurs.
.1.3.6.1.4.1.11.2.14.11.15.2.126.1.9.0.5,HPN-ICF-IPSEC-MONITOR-V2-MIB::hpnicfIPsecEncryFailFailureV2,,,,,,This notification is generated when the IPsec phase-2 tunnel has an encrypting failure.
.1.3.6.1.4.1.11.2.14.11.15.2.126.1.9.0.6,HPN-ICF-IPSEC-MONITOR-V2-MIB::hpnicfIPsecDecryFailFailureV2,,,,,,This notification is generated when the IPsec phase-2 tunnel has a decrypting failure.
.1.3.6.1.4.1.11.2.14.11.15.2.126.1.9.0.7,HPN-ICF-IPSEC-MONITOR-V2-MIB::hpnicfIPsecInvalidSaFailureV2,,,,,,This notification is generated when the IPsec phase-2 invalid SA failure occurs.
.1.3.6.1.4.1.11.2.14.11.15.2.126.1.9.0.8,HPN-ICF-IPSEC-MONITOR-V2-MIB::hpnicfIPsecPolicyAddV2,,,,,,This notification is generated when an IPsec policy is added.
.1.3.6.1.4.1.11.2.14.11.15.2.126.1.9.0.9,HPN-ICF-IPSEC-MONITOR-V2-MIB::hpnicfIPsecPolicyDelV2,,,,,,This notification is generated when an IPsec policy is deleted.
.1.3.6.1.4.1.11.2.14.11.15.2.126.1.9.0.10,HPN-ICF-IPSEC-MONITOR-V2-MIB::hpnicfIPsecPolicyAttachV2,,,,,,This notification is generated when an IPsec policy is attached with one interface.
.1.3.6.1.4.1.11.2.14.11.15.2.126.1.9.0.11,HPN-ICF-IPSEC-MONITOR-V2-MIB::hpnicfIPsecPolicyDetachV2,,,,,,This notification is generated when an IPsec policy is detached with one interface.
.1.3.6.1.4.1.11.2.14.11.15.2.126.2,HPN-ICF-IPSEC-MONITOR-V2-MIB::hpnicfIPsecConformanceV2,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.2.126.2.1,HPN-ICF-IPSEC-MONITOR-V2-MIB::hpnicfIPsecCompliancesV2,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.2.126.2.1.1,HPN-ICF-IPSEC-MONITOR-V2-MIB::hpnicfIPsecComplianceV2,,,,,, 
.1.3.6.1.4.1.11.2.14.11.15.2.126.2.2,HPN-ICF-IPSEC-MONITOR-V2-MIB::hpnicfIPsecGroupsV2,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.2.126.2.2.1,HPN-ICF-IPSEC-MONITOR-V2-MIB::hpnicfIPsecScalarObjectsGroupV2,,,,,,The group contains all of scalar objects of the MIB.
.1.3.6.1.4.1.11.2.14.11.15.2.126.2.2.2,HPN-ICF-IPSEC-MONITOR-V2-MIB::hpnicfIPsecTunnelTableGroupV2,,,,,,The group contains the IPsec tunnel's property information.
.1.3.6.1.4.1.11.2.14.11.15.2.126.2.2.3,HPN-ICF-IPSEC-MONITOR-V2-MIB::hpnicfIPsecTunnelStatGroupV2,,,,,,The group contains the IPsec tunnel's statistic information.
.1.3.6.1.4.1.11.2.14.11.15.2.126.2.2.4,HPN-ICF-IPSEC-MONITOR-V2-MIB::hpnicfIPsecSaGroupV2,,,,,,The group contains the SA's property information.
.1.3.6.1.4.1.11.2.14.11.15.2.126.2.2.5,HPN-ICF-IPSEC-MONITOR-V2-MIB::hpnicfIPsecTrafficTableGroupV2,,,,,,The group contains the property information of the data flow protected by IPsec tunnel.
.1.3.6.1.4.1.11.2.14.11.15.2.126.2.2.6,HPN-ICF-IPSEC-MONITOR-V2-MIB::hpnicfIPsecGlobalStatsGroupV2,,,,,,The group contains all of the IPsec tunnel's statistic information.
.1.3.6.1.4.1.11.2.14.11.15.2.126.2.2.7,HPN-ICF-IPSEC-MONITOR-V2-MIB::hpnicfIPsecTrapObjectGroupV2,,,,,,The group contains all of trap objects of IPsec tunnels.
.1.3.6.1.4.1.11.2.14.11.15.2.126.2.2.8,HPN-ICF-IPSEC-MONITOR-V2-MIB::hpnicfIPsecTrapCntlGroupV2,,,,,,The group contains all of trap switches of IPsec tunnels.
.1.3.6.1.4.1.11.2.14.11.15.2.126.2.2.9,HPN-ICF-IPSEC-MONITOR-V2-MIB::hpnicfIPsecTrapGroupV2,,,,,,The group contains all of trap of IPsec tunnels.
.1.3.6.1.4.1.11.2.14.11.15.2.127,HPN-ICF-OID-MIB::hpnicfSan,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.2.127.1,HPN-ICF-VSAN-MIB::hpnicfVsan,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.2.127.1.1,HPN-ICF-VSAN-MIB::hpnicfVsanMibObjects,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.2.127.1.1.1,HPN-ICF-VSAN-MIB::hpnicfVsanDmConfiguration,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.2.127.1.1.1.1,HPN-ICF-VSAN-MIB::hpnicfVsanTable,,not-accessible,,current,,A table contains all the VSANs configured on the device. It can be used to manage and monitor the VSANs on local device.
.1.3.6.1.4.1.11.2.14.11.15.2.127.1.1.1.1.1,HPN-ICF-VSAN-MIB::hpnicfVsanEntry,,not-accessible,hpnicfVsanIndex,current,,An entry that contains information about a VSAN in the hpnicfVsanTable.
.1.3.6.1.4.1.11.2.14.11.15.2.127.1.1.1.1.1.1,HPN-ICF-VSAN-MIB::hpnicfVsanIndex,Unsigned32,accessible-for-notify,,current,,The identifier of the VSAN.
.1.3.6.1.4.1.11.2.14.11.15.2.127.1.1.1.1.1.2,HPN-ICF-VSAN-MIB::hpnicfVsanCoreSwitchName,OCTET,read-only,,current,,The Core Switch_Name of the VSAN, which is indicated by the switch's WWN(World Wide Name).
.1.3.6.1.4.1.11.2.14.11.15.2.127.1.1.1.1.1.3,HPN-ICF-VSAN-MIB::hpnicfVsanRowStatus,INTEGER,read-create,,current,active(1):notInService(2):notReady(3):createAndGo(4):createAndWait(5):destroy(6),RowStatus. Now only three states are supported: createAndGo, active, and destroy.
.1.3.6.1.4.1.11.2.14.11.15.2.127.1.1.1.2,HPN-ICF-VSAN-MIB::hpnicfVsanDmTable,,not-accessible,,current,,A table contains doamin management related configurations and informations of VSANs. An entry in this table is created when corresponding VSAN is created, as well as deleted when the VSAN is deleted.
.1.3.6.1.4.1.11.2.14.11.15.2.127.1.1.1.2.1,HPN-ICF-VSAN-MIB::hpnicfVsanDmEntry,,not-accessible,hpnicfVsanIndex,current,,An entry of doamin management related configurations and informations of a specified VSAN.
.1.3.6.1.4.1.11.2.14.11.15.2.127.1.1.1.2.1.1,HPN-ICF-VSAN-MIB::hpnicfVsanDmDomainConfigureEnable,INTEGER,read-write,,current,true(1):false(2),To enable or disable the fabric configuration function in this VSAN. ture: enabled, the fabric will be built dynamically. false: disabled, the fabric should be built statically by manual configurations.
.1.3.6.1.4.1.11.2.14.11.15.2.127.1.1.1.2.1.2,HPN-ICF-VSAN-MIB::hpnicfVsanDmFabricNameConfigured,OCTET,read-write,,current,,Specifies the fabric name in this VSAN, and will use a zero-length octet string as default value if not configured. The fabric name specified here takes effect only if the value of hpnicfVsanDmDomainConfigureEnable is 'false', and the same fabric name should be configured for all switches in this VSAN. If the value of hpnicfVsanDmDomainConfigureEnable is 'true', the principal switch WWN is used as fabric name. The value should be set to zero-length when canceling a configured fabric name.
.1.3.6.1.4.1.11.2.14.11.15.2.127.1.1.1.2.1.3,HPN-ICF-VSAN-MIB::hpnicfVsanDmPriorityConfigured,Unsigned32,read-write,,current,,Specifies the priority of a switch in this VSAN, which is used during principal switch selection to cause one Switch to be favored over another.
.1.3.6.1.4.1.11.2.14.11.15.2.127.1.1.1.2.1.4,HPN-ICF-VSAN-MIB::hpnicfVsanDmAllowedDomainIdList,OCTET,read-write,,current,,Specifies the list of domain IDs that are allowed in the VSAN, and the configuration has different meanings in different scenarios: 1. Principal switch: Can only assign domains IDs within the allowed domain ID list. If the allowed domain ID list configured does not include any of the already assigned domain IDs or manually configured domain IDs, the configuration will fail. 2. Non-principal switch: The manually configured domain ID must be within the allowed domain ID list, or the configuration will fail. Besides, the domain ID assigned by principal switch must within the allowed domain ID list, or the switch will refuse the assigned domain ID and isolate the upstream interface. If the runtime domain ID for a switch is beyond the new configured ID list, the configuration will fail. The default value is a zero-length octet string. If This value is set with zero-length, the configuration will be cancelled in this VSAN.
.1.3.6.1.4.1.11.2.14.11.15.2.127.1.1.1.2.1.5,HPN-ICF-VSAN-MIB::hpnicfVsanDmDomainIdConfigured,Integer32,read-write,,current,,Used to configure or cancel a domain ID for a switch in this VSAN. When this value is not zero, the domain ID type should be specified together via hpnicfVsanDmDomainIdTypeConfigured, or the default value of preferred type will be taken. The zero value is used to cancel the domain ID configured, and then, there is no need to specify its type. When statically build a fabric, the configured domain ID is the actual domain ID of the switch. If this object is not manually configured, the switch will isolate all of its E_ports in this VSAN no matter what domain ID type is configured. When dynamically build a fabric, the configured domain ID is desired by the switch, but the domain ID assigned to the switch may not be the desired one. If a non-principal switch fails to obtain any domain ID from the principal switch, the non-principal switch will isolate the upstream link. If a non-principal switch obtains a domain ID from the principal switch other than the desired one, different actions will be taken according to different domain ID type configured: - If configured static type, The non-principal switch will isolate the upstream link and refuse other domain IDs assigned by the principal switch. - If configured preferred type, the non-principal switch will use the domain ID assigned by the principal switch.
.1.3.6.1.4.1.11.2.14.11.15.2.127.1.1.1.2.1.6,HPN-ICF-VSAN-MIB::hpnicfVsanDmDomainIdTypeConfigured,INTEGER,read-write,,current,static(1):preferred(2),Specifies the type of configured domain ID, which can be static type or preferred type.
.1.3.6.1.4.1.11.2.14.11.15.2.127.1.1.1.2.1.7,HPN-ICF-VSAN-MIB::hpnicfVsanDmAutoReconfigureEnable,INTEGER,read-write,,current,true(1):false(2),Used to specify whether a disruptive reconfiguration will be automatically performed when the domain ID lists overlaps in fabric merging. The fabric reconfiguration function takes effect only when the value of hpnicfVsanDmDomainConfigureEnable is 'true'.
.1.3.6.1.4.1.11.2.14.11.15.2.127.1.1.1.2.1.8,HPN-ICF-VSAN-MIB::hpnicfVsanDmDomainRestart,INTEGER,read-write,,current,noOperation(1):nonDisruptive(2):disruptive(3),Used to manually trigger a disruptive or non-disruptive reconfiguration of the fabric.
.1.3.6.1.4.1.11.2.14.11.15.2.127.1.1.1.2.1.9,HPN-ICF-VSAN-MIB::hpnicfVsanDmState,INTEGER,read-only,,current,disabledWithNoDomain(1):disabledWithDomainCfg(2):stableWithNoEports(3):stableWithDomainCfg(4):stableWithNoDomain(5):principalSwitchInSelect(6):domainIdRequesting(7):buildFabricPhase(8):reconfigureFabricPhase(9):unknown(10),Indicates the managing state of the domain in this VSAN.
.1.3.6.1.4.1.11.2.14.11.15.2.127.1.1.1.2.1.10,HPN-ICF-VSAN-MIB::hpnicfVsanDmDomainIdAssigned,Integer32,read-only,,current,,Indicates the Domain ID of the local switch in this VSAN or zero if no Domain ID has been assigned.
.1.3.6.1.4.1.11.2.14.11.15.2.127.1.1.1.2.1.11,HPN-ICF-VSAN-MIB::hpnicfVsanDmPrincipalSwitchWWN,OCTET,read-only,,current,,Indicates the WWN of the principal switch in this VSAN, or zero-length string if the identity of the principal switch is unknown.
.1.3.6.1.4.1.11.2.14.11.15.2.127.1.1.1.2.1.12,HPN-ICF-VSAN-MIB::hpnicfVsanDmLocalSwitchWWN,OCTET,read-only,,current,,Indicates the WWN of the local switch in this VSAN.
.1.3.6.1.4.1.11.2.14.11.15.2.127.1.1.1.2.1.13,HPN-ICF-VSAN-MIB::hpnicfVsanDmPrincipalSwRunPriority,Unsigned32,read-only,,current,,Indicates the running priority of the principal switch in this VSAN.
.1.3.6.1.4.1.11.2.14.11.15.2.127.1.1.1.2.1.14,HPN-ICF-VSAN-MIB::hpnicfVsanDmLocalSwRunPriority,Unsigned32,read-only,,current,,Indicates the running priority of the local switch in this VSAN.
.1.3.6.1.4.1.11.2.14.11.15.2.127.1.1.1.2.1.15,HPN-ICF-VSAN-MIB::hpnicfVsanDmPrincipalSwSlctCnt,Counter32,read-only,,current,,The times that local switch has participated in principal switch selection in this VSAN.
.1.3.6.1.4.1.11.2.14.11.15.2.127.1.1.1.2.1.16,HPN-ICF-VSAN-MIB::hpnicfVsanDmLocalPrincipalSwSlctCnt,Counter32,read-only,,current,,The times that local switch was elected as principal switch in this VSAN.
.1.3.6.1.4.1.11.2.14.11.15.2.127.1.1.1.2.1.17,HPN-ICF-VSAN-MIB::hpnicfVsanDmBFCnt,Counter32,read-only,,current,,The times that local switch has participated in a BF(Build Fabric) process in this VSAN.
.1.3.6.1.4.1.11.2.14.11.15.2.127.1.1.1.2.1.18,HPN-ICF-VSAN-MIB::hpnicfVsanDmRCFCnt,Counter32,read-only,,current,,The times that local switch has participated in a RCF (Reconfigure Fabric) process in this VSAN.
.1.3.6.1.4.1.11.2.14.11.15.2.127.1.1.1.3,HPN-ICF-VSAN-MIB::hpnicfVsanDmIfConfigTable,,not-accessible,,current,,A table contains the FC(Fibre Channel) related interface configurations about domain management of a VSAN.
.1.3.6.1.4.1.11.2.14.11.15.2.127.1.1.1.3.1,HPN-ICF-VSAN-MIB::hpnicfVsanDmIfConfigEntry,,not-accessible,ifIndex:hpnicfVsanIndex,current,,An entry used for managing the FC related interface configurations about domain management of a VSAN. An entry can be created when any object in this table is set to non-default value, and be deleted when the objects in this table are set to default value.
.1.3.6.1.4.1.11.2.14.11.15.2.127.1.1.1.3.1.1,HPN-ICF-VSAN-MIB::hpnicfVsanDmIfConfigRcfReject,INTEGER,read-write,,current,true(1):false(2),Used to specify whether the RCF(Reconfigure Fabric) requests received in this VSAN should be rejected. - true: the received RCF will be rejected. - false: the received RCF will be accepted.
.1.3.6.1.4.1.11.2.14.11.15.2.127.1.1.2,HPN-ICF-VSAN-MIB::hpnicfVsanDmInformation,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.2.127.1.1.2.1,HPN-ICF-VSAN-MIB::hpnicfVsanDmDatabaseTable,,not-accessible,,current,,A table specifies the information of the switch about all the Domain IDs which have been assigned in each of the VSANs.
.1.3.6.1.4.1.11.2.14.11.15.2.127.1.1.2.1.1,HPN-ICF-VSAN-MIB::hpnicfVsanDmDatabaseEntry,,not-accessible,hpnicfVsanIndex:hpnicfVsanDmDatabaseDomainId,current,,An object in the hpnicfVsanDmDatabaseTable contains one Domain ID and the corresponding WWN of the switch in one VSAN.
.1.3.6.1.4.1.11.2.14.11.15.2.127.1.1.2.1.1.1,HPN-ICF-VSAN-MIB::hpnicfVsanDmDatabaseDomainId,Integer32,not-accessible,,current,,The Domain ID which has been assigned.
.1.3.6.1.4.1.11.2.14.11.15.2.127.1.1.2.1.1.2,HPN-ICF-VSAN-MIB::hpnicfVsanDmDatabaseSwitchWWN,OCTET,read-only,,current,,The WWN of the switch to which the corresponding Domain ID has been assigned in the particular VSAN.
.1.3.6.1.4.1.11.2.14.11.15.2.127.1.1.2.2,HPN-ICF-VSAN-MIB::hpnicfVsanDmIfInfoTable,,not-accessible,,current,,A table specifies the information of an interface in each of the VSANs.
.1.3.6.1.4.1.11.2.14.11.15.2.127.1.1.2.2.1,HPN-ICF-VSAN-MIB::hpnicfVsanDmIfInfoEntry,,not-accessible,ifIndex:hpnicfVsanIndex,current,,A conceptual row in the hpnicfVsanDmIfInfoTable indicates the role information of the interface in the particular VSAN.
.1.3.6.1.4.1.11.2.14.11.15.2.127.1.1.2.2.1.1,HPN-ICF-VSAN-MIB::hpnicfVsanDmIfInfoRole,INTEGER,read-only,,current,nonPrincipal(1):principalUpstream(2):principalDownstream(3):isolated(4):unknown(5),The role of the interface in the VSAN. The value specifications are listed as follows: nonPrincipal - The state of the interface is not principal interface in the VSAN. principalUpstream - The state of the interface is upstream principal interface in the VSAN. principalDownstream - The state of the interface is downstream principal interface in the VSAN. isolated - The state of the interface is isolated in the VSAN. unknown - The state of the interface is unknown in the VSAN.
.1.3.6.1.4.1.11.2.14.11.15.2.127.1.1.3,HPN-ICF-VSAN-MIB::hpnicfVsanDmNotifications,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.2.127.1.1.3.0,HPN-ICF-VSAN-MIB::hpnicfVsanDmNotificationPrefix,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.2.127.1.1.3.0.1,HPN-ICF-VSAN-MIB::hpnicfVsanDmDomainIdNotAssignedNotify,,,,,,This event will be triggered if a Domain ID is not assigned or configured, then the E_ports may be isolated in the VSAN. The conditions are listed as follows: 1. If the switch has enabled the fabric configuration and a request for a configured static Domain ID is rejected or no other Domain ID is assigned, the E_ports will be isolated in the particular VSAN. 2. If the switch does not enable the fabric configuration and a Domain ID is not configured, all of its E_ports will be isolated in the particular VSAN. The notification contains the WWN of the Switch and the index of the VSAN in which the event occurred.
.1.3.6.1.4.1.11.2.14.11.15.2.127.1.1.3.0.2,HPN-ICF-VSAN-MIB::hpnicfVsanDmNewPrincipalSwitchNotify,,,,,,If a switch becomes the new Principal Switch in a VSAN, this notification is sent immediately after the election. The notification contains the WWN of the new Principal Switch and the index of the VSAN in which the transition occurred.
.1.3.6.1.4.1.11.2.14.11.15.2.127.1.1.3.0.3,HPN-ICF-VSAN-MIB::hpnicfVsanDmFabricChangeNotify,,,,,,This event will be triggered if a switch sends or receives a Build Fabric (BF) or a Reconfigure Fabric (RCF) message in a VSAN. The conditions a switch can receive or send a BF or a RCF are listed as follows: 1. Two isolated fabrics in a VSAN merge into one fabric. If the Domain ID lists does not overlap, the sent or received message is BF, other cases, it is RCF. 2. If an upstream principal link which connects to principal switch and other switches become disconnected, the sent or received message is BF. 3. A BF or RCF process is triggered manually by configuration. The notification contains the index of the VSAN in which a BF or a RCF was sent or received.
.1.3.6.1.4.1.11.2.14.11.15.2.127.1.1.3.1,HPN-ICF-VSAN-MIB::hpnicfVsanDmNotificationSwitch,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.2.127.1.1.3.1.1,HPN-ICF-VSAN-MIB::hpnicfVsanDmFabricChangeNotifyEnable,INTEGER,read-write,,current,true(1):false(2),Specifies whether the hpnicfVsanDmFabricChangeNotify can be sent when a BF or RCF message was sent or received by a switch.
.1.3.6.1.4.1.11.2.14.11.15.2.127.2,HPN-ICF-SAN-AGG-MIB::hpnicfSanAgg,,,,,,This MIB module is for configuring and monitoring SAN (Storage Area Networks) aggregation group related MIB objects. This MIB can be used to add or delete a SAN aggregation group, and make one or more FC (Fiber Channel) ports join or leave the group, as well as show their states.
.1.3.6.1.4.1.11.2.14.11.15.2.127.2.1,HPN-ICF-SAN-AGG-MIB::hpnicfSanAggMibObjects,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.2.127.2.1.1,HPN-ICF-SAN-AGG-MIB::hpnicfSanAggMaxMemberNumber,Integer32,read-only,,current,,This value specifies the maximum member number that a SAN aggregation group supports, and this restriction depends on product customization.
.1.3.6.1.4.1.11.2.14.11.15.2.127.2.2,HPN-ICF-SAN-AGG-MIB::hpnicfSanAggGroupTable,,not-accessible,,current,,A table of SAN aggregation objects to be used in configuring and monitoring a SAN aggregation group and its members.
.1.3.6.1.4.1.11.2.14.11.15.2.127.2.2.1,HPN-ICF-SAN-AGG-MIB::hpnicfSanAggGroupEntry,,not-accessible,hpnicfSanAggGroupNumber,current,,A group of SAN aggregation objects to be used in configuring and monitoring a SAN aggregation group and its members.
.1.3.6.1.4.1.11.2.14.11.15.2.127.2.2.1.1,HPN-ICF-SAN-AGG-MIB::hpnicfSanAggGroupNumber,Integer32,accessible-for-notify,,current,,The serial number of the current SAN aggregation group.
.1.3.6.1.4.1.11.2.14.11.15.2.127.2.2.1.2,HPN-ICF-SAN-AGG-MIB::hpnicfSanAggGroupIndex,Integer32,read-only,,current,,The ifIndex of the current SAN aggregation group.
.1.3.6.1.4.1.11.2.14.11.15.2.127.2.2.1.3,HPN-ICF-SAN-AGG-MIB::hpnicfSanAggMemberList,OCTET,read-create,,current,,List of member's ifIndex in the current SAN aggregation group. If there is no member in the SAN aggregation group, the list length should be zero. Otherwise each member's ifIndex value occupies 4 octets. The greatest length of this list depends on the maximum number of members a SAN aggregation group supports, which can be customized and therefore is not a fixed value. When getting the group members' ifIndexes, the result was sorted in ascending order of ifIndex values. However, when setting the group members' ifIndexes, the sequence of ifIndex values is not required.
.1.3.6.1.4.1.11.2.14.11.15.2.127.2.2.1.4,HPN-ICF-SAN-AGG-MIB::hpnicfSanAggMemberStateList,OCTET,read-only,,current,,List of member's state in current SAN aggregation group, where the state value is sorted in ascending order of member's ifIndex, which is consistent with the 'get' result of 'hpnicfSanAggMemberList'. The explanation of this value's length is as same as the 'hpnicfSanAggMemberList'. Each member's state value occupies 4 octets. The value specifications are listed as follows: 1: This member hasn't passed the link negotiation. 2: This member has passed the link negotiation but has not been selected. 3: This member has been selected.
.1.3.6.1.4.1.11.2.14.11.15.2.127.2.2.1.5,HPN-ICF-SAN-AGG-MIB::hpnicfSanAggGroupRowStatus,INTEGER,read-create,,current,active(1):notInService(2):notReady(3):createAndGo(4):createAndWait(5):destroy(6),RowStatus. Now only three states are supported: createAndGo, active, and destroy.
.1.3.6.1.4.1.11.2.14.11.15.2.127.2.3,HPN-ICF-SAN-AGG-MIB::hpnicfSanAggObjForNotification,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.2.127.2.3.1,HPN-ICF-SAN-AGG-MIB::hpnicfSanAggGroupPreviousSpeed,Integer32,accessible-for-notify,,current,,The previous speed of the SAN aggregation group.
.1.3.6.1.4.1.11.2.14.11.15.2.127.2.3.2,HPN-ICF-SAN-AGG-MIB::hpnicfSanAggGroupCurrentSpeed,Integer32,accessible-for-notify,,current,,The current speed of the SAN aggregation group.
.1.3.6.1.4.1.11.2.14.11.15.2.127.2.4,HPN-ICF-SAN-AGG-MIB::hpnicfSanAggNotifications,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.2.127.2.4.0,HPN-ICF-SAN-AGG-MIB::hpnicfSanAggNotificationPrefix,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.2.127.2.4.0.1,HPN-ICF-SAN-AGG-MIB::hpnicfSanAggGroupSpeedChange,,,,,,This event will be triggered whenever a SAN aggregation group changes its speed.
.1.3.6.1.4.1.11.2.14.11.15.2.127.2.4.0.2,HPN-ICF-SAN-AGG-MIB::hpnicfSanAggMemberInactive,,,,,,This event will be triggered whenever any member in a SAN aggregation group is made inactive.
.1.3.6.1.4.1.11.2.14.11.15.2.127.2.4.0.3,HPN-ICF-SAN-AGG-MIB::hpnicfSanAggMemberActive,,,,,,This event will be triggered whenever any member in a SAN aggregation group is made active.
.1.3.6.1.4.1.11.2.14.11.15.2.127.3,HPN-ICF-FC-FLOGIN-MIB::hpnicfFcFLogin,,,,,,This MIB module is for representing fabric login information.
.1.3.6.1.4.1.11.2.14.11.15.2.127.3.1,HPN-ICF-FC-FLOGIN-MIB::hpnicfFcFLoginMibObjects,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.2.127.3.1.1,HPN-ICF-FC-FLOGIN-MIB::hpnicfFcFLoginTable,,not-accessible,,current,,A table of Fibre Channel related service parameters used to represent the fabric login information in accord with each Nx_Port attached to a particular Fibre Channel port in a particular VSAN (Virtual Storage Area Network). Each entry is created by a fabric switch when an Nx_Port successfully logged in to it explicitly or implicitly, and is deleted when the port logged out.
.1.3.6.1.4.1.11.2.14.11.15.2.127.3.1.1.1,HPN-ICF-FC-FLOGIN-MIB::hpnicfFcFLoginEntry,,not-accessible,ifIndex:hpnicfVsanIndex:hpnicfFcFLoginIndex,current,,A group of Fibre Channel related service parameters used to represent fabric login information of a specific Nx_Port.
.1.3.6.1.4.1.11.2.14.11.15.2.127.3.1.1.1.1,HPN-ICF-FC-FLOGIN-MIB::hpnicfFcFLoginIndex,OCTET,not-accessible,,current,,The index of current fabric login entry. The Fibre Channel address identifier is used to identify the associated Nx_Port of this entry.
.1.3.6.1.4.1.11.2.14.11.15.2.127.3.1.1.1.2,HPN-ICF-FC-FLOGIN-MIB::hpnicfFcFLoginPortNodeWWN,OCTET,read-only,,current,,The world wide name of the Remote Node to which the logged-in Nx_Port belongs.
.1.3.6.1.4.1.11.2.14.11.15.2.127.3.1.1.1.3,HPN-ICF-FC-FLOGIN-MIB::hpnicfFcFLoginPortWWN,OCTET,read-only,,current,,The world wide name of the logged-in Nx_Port.
.1.3.6.1.4.1.11.2.14.11.15.2.127.3.1.1.1.4,HPN-ICF-FC-FLOGIN-MIB::hpnicfFcFLoginPortFcId,OCTET,read-only,,current,,The Fibre Channel address identifier that has been assigned by the fabric to the logged-in Nx_Port.
.1.3.6.1.4.1.11.2.14.11.15.2.127.3.1.1.1.5,HPN-ICF-FC-FLOGIN-MIB::hpnicfFcFLoginRxBbCredit,Integer32,read-only,,current,,The maximum number of buffers available for a recipient to receive frames from the logged-in Nx_Port in Class2, Class3. The object is used in the buffer-to-buffer flow control from the logged-in Nx_Port to Fx_Port.
.1.3.6.1.4.1.11.2.14.11.15.2.127.3.1.1.1.6,HPN-ICF-FC-FLOGIN-MIB::hpnicfFcFLoginTxBbCredit,Integer32,read-only,,current,,The total number of buffers available for a sender to transmit frames to the logged-in Nx_Port in Class2, Class3. The object is used in the buffer-to-buffer flow control from Fx_Port to the logged-in Nx_Port.
.1.3.6.1.4.1.11.2.14.11.15.2.127.3.1.1.1.7,HPN-ICF-FC-FLOGIN-MIB::hpnicfFcFLoginClass2RxMTU,Integer32,read-only,,current,,The object specifies the Maximum Transmission Unit of an Fibre Channel frame that can be received by the logged-in Nx_Port in Class 2 service.
.1.3.6.1.4.1.11.2.14.11.15.2.127.3.1.1.1.8,HPN-ICF-FC-FLOGIN-MIB::hpnicfFcFLoginClass3RxMTU,Integer32,read-only,,current,,The object specifies the Maximum Transmission Unit of an Fibre Channel frame that can be received by the logged-in Nx_Port in Class 3 service.
.1.3.6.1.4.1.11.2.14.11.15.2.127.3.1.1.1.9,HPN-ICF-FC-FLOGIN-MIB::hpnicfFcFLoginSuppClassRequested,BITS,read-only,,current,classF(0):class1(1):class2(2):class3(3):class4(4):class5(5):class6(6),The object indicating the supported Classes that the logged-in Nx_Port has requested.
.1.3.6.1.4.1.11.2.14.11.15.2.127.3.1.1.1.10,HPN-ICF-FC-FLOGIN-MIB::hpnicfFcFLoginClass2ReqAgreed,INTEGER,read-only,,current,true(1):false(2),The object indicating whether the Fx_Port has agreed to support Class 2 delivery that the logged-in Nx_Port requested. It's meaningful only when the Class 2 delivery has been requested.
.1.3.6.1.4.1.11.2.14.11.15.2.127.3.1.1.1.11,HPN-ICF-FC-FLOGIN-MIB::hpnicfFcFLoginClass3ReqAgreed,INTEGER,read-only,,current,true(1):false(2),The object indicating whether the Fx_Port has agreed to support Class 3 delivery that the logged-in Nx_Port requested. It's meaningful only when the Class 3 delivery has been requested.
.1.3.6.1.4.1.11.2.14.11.15.2.127.4,HPN-ICF-FC-TRACE-ROUTE-MIB::hpnicfFcTraceRoute,,,,,,This MIB module is for the management of the Fibre Channel Trace Route functionality.
.1.3.6.1.4.1.11.2.14.11.15.2.127.4.1,HPN-ICF-FC-TRACE-ROUTE-MIB::hpnicfFcTraceRouteObjects,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.2.127.4.1.1,HPN-ICF-FC-TRACE-ROUTE-MIB::hpnicfFcTraceRouteConfigurations,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.2.127.4.1.1.1,HPN-ICF-FC-TRACE-ROUTE-MIB::hpnicfFcTraceRouteTable,,not-accessible,,current,,A table of trace route entries containing a group of trace route requests that need to be executed at the agent.
.1.3.6.1.4.1.11.2.14.11.15.2.127.4.1.1.1.1,HPN-ICF-FC-TRACE-ROUTE-MIB::hpnicfFcTraceRouteEntry,,not-accessible,hpnicfFcTraceRouteIndex,current,,A trace route request entry that needs to be executed at the agent.
.1.3.6.1.4.1.11.2.14.11.15.2.127.4.1.1.1.1.1,HPN-ICF-FC-TRACE-ROUTE-MIB::hpnicfFcTraceRouteIndex,Unsigned32,accessible-for-notify,,current,,The index of the current trace route entry. This object uniquely identifies a trace route request entry in a specified VSAN (Virtual Storage Area Network).
.1.3.6.1.4.1.11.2.14.11.15.2.127.4.1.1.1.1.2,HPN-ICF-FC-TRACE-ROUTE-MIB::hpnicfFcTraceRouteVsan,Unsigned32,read-create,,current,,The VSAN on which the trace route request will be executed. If the corresponding instance value of hpnicfFcTraceRouteOperStatus is 'inProgress', the object cannot be modified.
.1.3.6.1.4.1.11.2.14.11.15.2.127.4.1.1.1.1.3,HPN-ICF-FC-TRACE-ROUTE-MIB::hpnicfFcTraceRouteAddressType,INTEGER,read-create,,current,wwn(1):fcid(2),The type of the corresponding instance of hpnicfFcTraceRouteAddress object.
.1.3.6.1.4.1.11.2.14.11.15.2.127.4.1.1.1.1.4,HPN-ICF-FC-TRACE-ROUTE-MIB::hpnicfFcTraceRouteAddress,OCTET,read-create,,current,,The address to which the route will be traced. This object will contain an 8-octet WWN (World Wide Name), if the value of the associated instance of hpnicfFcTraceRouteAddressType object is 'wwn'. This object will contain a 3-octet Fibre Channel ID, if the value of the associated instance of hpnicfFcTraceRouteAddressType object is 'fcid'.
.1.3.6.1.4.1.11.2.14.11.15.2.127.4.1.1.1.1.5,HPN-ICF-FC-TRACE-ROUTE-MIB::hpnicfFcTraceRouteTimeout,Unsigned32,read-create,,current,,The value of timeout for this trace route request. If the corresponding instance value of hpnicfFcTraceRouteOperStatus object is 'inProgress', this object cannot be modified.
.1.3.6.1.4.1.11.2.14.11.15.2.127.4.1.1.1.1.6,HPN-ICF-FC-TRACE-ROUTE-MIB::hpnicfFcTraceRouteAdminStatus,INTEGER,read-create,,current,enable(1):disable(2),The administrative status of each hpnicfFcTraceRouteEntry. The object has two values: enable - Activate the entry. disable - Deactivate the entry. When the trace route entry is being executed, this object cannot be modified. If this object is being read, a value of 'enable' will be returned. When the execution finishes, the value of this object will be set to 'disable'.
.1.3.6.1.4.1.11.2.14.11.15.2.127.4.1.1.1.1.7,HPN-ICF-FC-TRACE-ROUTE-MIB::hpnicfFcTraceRouteOperStatus,INTEGER,read-only,,current,inProgress(1):success(2):partialSuccess(3):failure(4):disabled(5),This object indicates the operational status of this hpnicfFcTraceRouteEntry. The value specifications are listed as follows: inProgress - Trace route is in progress. success - Trace route has succeeded. partialSuccess - Trace route has partially succeeded. failure - Trace route has failed due to resource limitations. disabled - Trace route is disabled.
.1.3.6.1.4.1.11.2.14.11.15.2.127.4.1.1.1.1.8,HPN-ICF-FC-TRACE-ROUTE-MIB::hpnicfFcTraceRouteAgeInterval,Unsigned32,read-create,,current,,The interval time for an entry to age out after a trace route test is completed.
.1.3.6.1.4.1.11.2.14.11.15.2.127.4.1.1.1.1.9,HPN-ICF-FC-TRACE-ROUTE-MIB::hpnicfFcTraceRouteTrapOnCompletion,INTEGER,read-create,,current,true(1):false(2),This object indicates whether a hpnicfFcTraceRouteCompletionNotify notification should be generated when this trace route test completes.
.1.3.6.1.4.1.11.2.14.11.15.2.127.4.1.1.1.1.10,HPN-ICF-FC-TRACE-ROUTE-MIB::hpnicfFcTraceRouteRowStatus,INTEGER,read-create,,current,active(1):notInService(2):notReady(3):createAndGo(4):createAndWait(5):destroy(6),The status of this conceptual row.
.1.3.6.1.4.1.11.2.14.11.15.2.127.4.1.2,HPN-ICF-FC-TRACE-ROUTE-MIB::hpnicfFcTraceRouteResults,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.2.127.4.1.2.1,HPN-ICF-FC-TRACE-ROUTE-MIB::hpnicfFcTraceRouteHopsTable,,not-accessible,,current,,A table of trace route hop results. This table indicates the hop-by-hop result of a trace route test associated with an entry in the hpnicfFcTraceRouteTable.
.1.3.6.1.4.1.11.2.14.11.15.2.127.4.1.2.1.1,HPN-ICF-FC-TRACE-ROUTE-MIB::hpnicfFcTraceRouteHopsEntry,,not-accessible,hpnicfFcTraceRouteIndex:hpnicfFcTraceRouteHopsIndex,current,,A trace route hop entry. The first index member specifies the hpnicfFcTraceRouteEntry that an hpnicfFcTraceRouteHopsEntry is associated with. The second index element identifies a hop in a trace route path. In the case of a complete path being traced, entries corresponding to an hpnicfFcTraceRouteEntry are created automatically in this table. Each hop in the complete path will be listed in this table. When an hpnicfFcTraceRouteEntry is deleted or aged out, the entries corresponding to the hpnicfFcTraceRouteEntry in this table are also deleted.
.1.3.6.1.4.1.11.2.14.11.15.2.127.4.1.2.1.1.1,HPN-ICF-FC-TRACE-ROUTE-MIB::hpnicfFcTraceRouteHopsIndex,Unsigned32,not-accessible,,current,,This object indicates the hop index for a trace route hop. Values for this object associated with the same hpnicfFcTraceRouteIndex MUST begin with 1 and automatically increase by 1.
.1.3.6.1.4.1.11.2.14.11.15.2.127.4.1.2.1.1.2,HPN-ICF-FC-TRACE-ROUTE-MIB::hpnicfFcTraceRouteHopsAddr,OCTET,read-only,,current,,This object specifies the WWN of the device associated with this hop.
.1.3.6.1.4.1.11.2.14.11.15.2.127.4.1.3,HPN-ICF-FC-TRACE-ROUTE-MIB::hpnicfFcTraceRouteNotifications,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.2.127.4.1.3.0,HPN-ICF-FC-TRACE-ROUTE-MIB::hpnicfFcTraceRouteNotifyPrefix,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.2.127.4.1.3.0.1,HPN-ICF-FC-TRACE-ROUTE-MIB::hpnicfFcTraceRouteCompletionNotify,,,,,,When a trace route test is finished and the instance of hpnicfFcTraceRouteTrapOnCompletion associated with the test is set to 'true', this notification occurred.
.1.3.6.1.4.1.11.2.14.11.15.2.127.5,HPN-ICF-FC-PING-MIB::hpnicfFcPing,,,,,,This MIB module is for the management of the Fibre Channel Ping functionality.
.1.3.6.1.4.1.11.2.14.11.15.2.127.5.1,HPN-ICF-FC-PING-MIB::hpnicfFcPingObjects,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.2.127.5.1.1,HPN-ICF-FC-PING-MIB::hpnicfFcPingConfigurations,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.2.127.5.1.1.1,HPN-ICF-FC-PING-MIB::hpnicfFcPingTable,,not-accessible,,current,,A table of FC ping entries containing a group of FC ping requests that need to be executed at the agent.
.1.3.6.1.4.1.11.2.14.11.15.2.127.5.1.1.1.1,HPN-ICF-FC-PING-MIB::hpnicfFcPingEntry,,not-accessible,hpnicfFcPingIndex,current,,A FC ping request entry that need to be executed at the agent.
.1.3.6.1.4.1.11.2.14.11.15.2.127.5.1.1.1.1.1,HPN-ICF-FC-PING-MIB::hpnicfFcPingIndex,Unsigned32,accessible-for-notify,,current,,The index of the current FC ping entry. This object identifies a FC ping request entry uniquely in a specified VSAN (Virtual Storage Area Network).
.1.3.6.1.4.1.11.2.14.11.15.2.127.5.1.1.1.1.2,HPN-ICF-FC-PING-MIB::hpnicfFcPingVsan,Unsigned32,read-create,,current,,The VSAN on which the FC ping request will be performed. If the corresponding instance value of hpnicfFcPingOperStatus is 'inProgress', the object cannot be modified.
.1.3.6.1.4.1.11.2.14.11.15.2.127.5.1.1.1.1.3,HPN-ICF-FC-PING-MIB::hpnicfFcPingAddressType,INTEGER,read-create,,current,wwn(1):fcid(2),The type of the corresponding instance of hpnicfFcPingAddress object.
.1.3.6.1.4.1.11.2.14.11.15.2.127.5.1.1.1.1.4,HPN-ICF-FC-PING-MIB::hpnicfFcPingAddress,OCTET,read-create,,current,,The address to which the route will be pinged. This object will contain an 8 octet long WWN(World Wide Name), if the value of the associated instance of hpnicfFcPingAddressType object is 'wwn'. This object will contain a 3 octet long Fibre Channel Address ID, if the value of the associated instance of hpnicfFcPingAddressType object is 'fcid'.
.1.3.6.1.4.1.11.2.14.11.15.2.127.5.1.1.1.1.5,HPN-ICF-FC-PING-MIB::hpnicfFcPingPacketCount,Unsigned32,read-create,,current,,The number of FC ping packets to be sent to the target in this sequence.
.1.3.6.1.4.1.11.2.14.11.15.2.127.5.1.1.1.1.6,HPN-ICF-FC-PING-MIB::hpnicfFcPingPayloadSize,Unsigned32,read-only,,current,,This object specifies the size of the FC ping packet payload to be sent to the target in this sequence.
.1.3.6.1.4.1.11.2.14.11.15.2.127.5.1.1.1.1.7,HPN-ICF-FC-PING-MIB::hpnicfFcPingTimeout,Unsigned32,read-create,,current,,The value of timeout for this FC ping request.
.1.3.6.1.4.1.11.2.14.11.15.2.127.5.1.1.1.1.8,HPN-ICF-FC-PING-MIB::hpnicfFcPingDelay,Unsigned32,read-only,,current,,The minimum amount of time to wait before sending the next packet in a sequence, after receiving a response or declaring a timeout for a previously transmitted packet.
.1.3.6.1.4.1.11.2.14.11.15.2.127.5.1.1.1.1.9,HPN-ICF-FC-PING-MIB::hpnicfFcPingAgeInterval,Unsigned32,read-create,,current,,The interval time after a FC ping test completes before the entry is aged out.
.1.3.6.1.4.1.11.2.14.11.15.2.127.5.1.1.1.1.10,HPN-ICF-FC-PING-MIB::hpnicfFcPingAdminStatus,INTEGER,read-create,,current,enable(1):disable(2),The administrative status of each hpnicfFcPingEntry. The object has two values: enable - Activate the entry. disable - Deactivate the entry. When the FC ping entry is executing, this object cannot be modified. If this object is read at such a time, a value of 'enable' will be returned. When the test finishes, the value of this object will be set to 'disable'.
.1.3.6.1.4.1.11.2.14.11.15.2.127.5.1.1.1.1.11,HPN-ICF-FC-PING-MIB::hpnicfFcPingOperStatus,INTEGER,read-only,,current,inProgress(1):complete(2):disabled(3):failed(4),This object indicates the operational status of this hpnicfFcPingEntry. The value specifications are listed as follows: inProgress - FC ping is in progress. complete - FC ping is complete. disabled - FC ping is disabled. failed - FC ping has failed due to resource limitations.
.1.3.6.1.4.1.11.2.14.11.15.2.127.5.1.1.1.1.12,HPN-ICF-FC-PING-MIB::hpnicfFcPingTrapOnCompletion,INTEGER,read-create,,current,true(1):false(2),This object indicates that if hpnicfFcPingCompletionNotify notification should be generated or not when the corresponding ping sequence completes.
.1.3.6.1.4.1.11.2.14.11.15.2.127.5.1.1.1.1.13,HPN-ICF-FC-PING-MIB::hpnicfFcPingRowStatus,INTEGER,read-create,,current,active(1):notInService(2):notReady(3):createAndGo(4):createAndWait(5):destroy(6),The status of this conceptual row.
.1.3.6.1.4.1.11.2.14.11.15.2.127.5.1.2,HPN-ICF-FC-PING-MIB::hpnicfFcPingStatistics,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.2.127.5.1.2.1,HPN-ICF-FC-PING-MIB::hpnicfFcPingStatTable,,not-accessible,,current,,A table of FC ping statistics. This table notes the FC ping statistics of a FC ping test associated with an entry in the hpnicfFcPingTable.
.1.3.6.1.4.1.11.2.14.11.15.2.127.5.1.2.1.1,HPN-ICF-FC-PING-MIB::hpnicfFcPingStatEntry,,not-accessible,hpnicfFcPingIndex,current,,A FC ping statistics entry. An entry will be created automatically in this table when the hpnicfFcPingRowStatus of a ping request in the hpnicfFcPingTable is set to 'active'. The entry in this table will have the same indices as the entry that in the hpnicfFcPingTable. An entry in this table will be deleted when the corresponding entry in the hpnicfFcPingTable is deleted.
.1.3.6.1.4.1.11.2.14.11.15.2.127.5.1.2.1.1.1,HPN-ICF-FC-PING-MIB::hpnicfFcPingReqPackets,Unsigned32,read-only,,current,,The number of FC ping packets request in this sequence.
.1.3.6.1.4.1.11.2.14.11.15.2.127.5.1.2.1.1.2,HPN-ICF-FC-PING-MIB::hpnicfFcPingResPackets,Unsigned32,read-only,,current,,The number of FC ping packets response in this sequence.
.1.3.6.1.4.1.11.2.14.11.15.2.127.5.1.2.1.1.3,HPN-ICF-FC-PING-MIB::hpnicfFcPingMinTime,Integer32,read-only,,current,,The minimum round trip time of all the packets that have been sent in this sequence.
.1.3.6.1.4.1.11.2.14.11.15.2.127.5.1.2.1.1.4,HPN-ICF-FC-PING-MIB::hpnicfFcPingAverageTime,Integer32,read-only,,current,,The average round trip time of all the packets that have been sent in this sequence.
.1.3.6.1.4.1.11.2.14.11.15.2.127.5.1.2.1.1.5,HPN-ICF-FC-PING-MIB::hpnicfFcPingMaxTime,Integer32,read-only,,current,,The maximum round trip time of all the packets that have been sent in this sequence.
.1.3.6.1.4.1.11.2.14.11.15.2.127.5.1.2.1.1.6,HPN-ICF-FC-PING-MIB::hpnicfFcPingTimeoutNum,Unsigned32,read-only,,current,,The number of timeouts encountered in this sequence.
.1.3.6.1.4.1.11.2.14.11.15.2.127.5.1.3,HPN-ICF-FC-PING-MIB::hpnicfFcPingNotifications,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.2.127.5.1.3.0,HPN-ICF-FC-PING-MIB::hpnicfFcPingNotifyPrefix,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.2.127.5.1.3.0.1,HPN-ICF-FC-PING-MIB::hpnicfFcPingCompletionNotify,,,,,,When a FC ping test is finished and the instance of hpnicfFcPingTrapOnCompletion associated with the test is set to 'true', this notification occurred.
.1.3.6.1.4.1.11.2.14.11.15.2.127.6,HPN-ICF-NPV-MIB::hpnicfNpv,,,,,,This MIB module is for the management of N_Port Virtualization or NPV within the framework of N_Port virtualization(NPV) architecture. N_Port virtualization reduces the number of Fibre Channel domain IDs in SANs(Storage Aera Network). Switches operating in the NPV mode do not join a fabric; rather, they pass traffic between NPV core switch links and end-devices, which eliminates the domain IDs for these edge switches. NPV core switch is a fibre channel edge switch connected to one or more NPV devices.
.1.3.6.1.4.1.11.2.14.11.15.2.127.6.1,HPN-ICF-NPV-MIB::hpnicfNpvMibObjects,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.2.127.6.1.1,HPN-ICF-NPV-MIB::hpnicfNpvConfiguration,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.2.127.6.1.1.1,HPN-ICF-NPV-MIB::hpnicfNpvGlobalObjects,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.2.127.6.1.1.1.1,HPN-ICF-NPV-MIB::hpnicfNpvLoadbalanceVsan,Unsigned32,read-write,,current,,Used to trigger a load-banlancing in the specified VSAN (Virtual Storage Area Network). When the hpnicfNpvLoadbalanceVsan is set to a specific VSAN, a disruptive load-balancing process will be initiated in the VSAN so that all nodes in the VSAN will re-login to the core switch. This load-balancing process redistributes downlink traffic across all uplink interfaces for better load balancing, but it causes traffic interruption.
.1.3.6.1.4.1.11.2.14.11.15.2.127.6.1.1.2,HPN-ICF-NPV-MIB::hpnicfNpvTrafficMapConfigTable,,not-accessible,,current,,A table containing information on the assignment of traffic map interfaces to an interface.
.1.3.6.1.4.1.11.2.14.11.15.2.127.6.1.1.2.1,HPN-ICF-NPV-MIB::hpnicfNpvTrafficMapConfigEntry,,not-accessible,ifIndex:hpnicfVsanIndex,current,,An entry in the hpnicfNpvTrafficMapConfigTable. This table contains entries for each of the interfaces which has been assigned a set of interfaces for traffic mapping in the VSAN. Traffic mapping is a technique used in NPV device to restrict the usage of external interface(s) for forwarding the traffic from server interface to the fibre channel fabric. If an interface comes up as a server interface and finds a corresponding entry in this table, then the switch software will assign a valid external interface from this list, if any. Once assigned, that assigned external interface will be used for forwarding the traffic from the server interface to the fibre channel fabric. If an interface comes up as a server interface and finds an entry in this table, but with no valid list of external interfaces, then the switch software keeps the server interface in operationally down state until at least one of the interface in the list becomes a valid external interface. If an interface comes up as a server interface and it can not find an entry in this table, then any of the available external interfaces can be assigned to that server interface. Entries in this table can be created or destroyed via hpnicfNpvTrafficMapRowStatus object. Columnar objects can be modified when the corresponding hpnicfNpvTrafficMapRowStatus is 'active'.
.1.3.6.1.4.1.11.2.14.11.15.2.127.6.1.1.2.1.1,HPN-ICF-NPV-MIB::hpnicfNpvTrafficMapExternalIfIndexList,OCTET,read-create,,current,,The list of external interfaces which the traffic needs to be mapped to. This object is a list of interfaces presented as an octet string of interface indices or ifindex-es. The list should contain at least one interface and at most all the interfaces in the switch up to 16384 interfaces. The 16384 interfaces max-limit is due to the size of this object. Specifying this object is mandatory for the creation of a row in hpnicfNpvTrafficMapConfigTable.
.1.3.6.1.4.1.11.2.14.11.15.2.127.6.1.1.2.1.2,HPN-ICF-NPV-MIB::hpnicfNpvTrafficMapLastChange,TimeTicks,read-only,,current,,The value of sysUpTime at the time of the latest change to this traffic map entry. When there has not been any change to the traffic map entry, the value of this field will be that of the entry creation time.
.1.3.6.1.4.1.11.2.14.11.15.2.127.6.1.1.2.1.3,HPN-ICF-NPV-MIB::hpnicfNpvTrafficMapRowStatus,INTEGER,read-create,,current,active(1):notInService(2):notReady(3):createAndGo(4):createAndWait(5):destroy(6),The status of this conceptual row. The row can be made 'active' only if value of corresponding instance of hpnicfNpvTrafficMapExternalIfIndexList is provided.
.1.3.6.1.4.1.11.2.14.11.15.2.127.6.1.1.3,HPN-ICF-NPV-MIB::hpnicfNpvServerIfTable,,not-accessible,,current,,This table contains, one entry for each server interface(FC-port configured in F-port mode) in this VSAN in the Fabric element. Each entry contains NPV related information like external interface assigned for the server interface in the VSAN.
.1.3.6.1.4.1.11.2.14.11.15.2.127.6.1.1.3.1,HPN-ICF-NPV-MIB::hpnicfNpvServerIfEntry,,not-accessible,ifIndex:hpnicfVsanIndex,current,,An entry in the hpnicfNpvServerIfTable, containing NPV related parameters established by a server interface indicated by ifIndex.
.1.3.6.1.4.1.11.2.14.11.15.2.127.6.1.1.3.1.1,HPN-ICF-NPV-MIB::hpnicfNpvExternalIfIndex,Integer32,read-only,,current,,This value of this object is the external interface assigned for the server interface associated with the server interface.
.1.3.6.1.4.1.11.2.14.11.15.2.127.7,HPN-ICF-FDMI-MIB::hpnicfFdmi,,,,,,This MIB module is for monitoring Fabric Device Management Interface (FDMI) related entities. This MIB module defines objects for managing the devices such as Host Bus Adapter (HBA). It provides device information which has been registered with an Fibre Channel (FC) fabric using FDMI. For more information on FDMI, refer to Fibre Channel Generic Services-6 Section 6.7 : Fabric Device Management Interface.
.1.3.6.1.4.1.11.2.14.11.15.2.127.7.1,HPN-ICF-FDMI-MIB::hpnicfFdmiObjects,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.2.127.7.1.1,HPN-ICF-FDMI-MIB::hpnicfFdmiInfo,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.2.127.7.1.1.1,HPN-ICF-FDMI-MIB::hpnicfFdmiHbaInfoTable,,not-accessible,,current,,This table lists all the HBAs registered with the Fabric Device Management Interface.
.1.3.6.1.4.1.11.2.14.11.15.2.127.7.1.1.1.1,HPN-ICF-FDMI-MIB::hpnicfFdmiHbaInfoEntry,,not-accessible,fcmInstanceIndex:hpnicfFdmiHbaInfoFabricIndex:hpnicfFdmiHbaInfoId,current,,An entry (conceptual row) in this table. It provides information that has been registered with FDMI by a HBA, on the Virtual Storage Area Network (VSAN) where the registration was received. If the HBA has registered some but not all of the information represented by the columnar objects in this table, then the value of the unregistered objects will be either the zero-length string (for string-based objects) or the zero value (for integer-based objects).
.1.3.6.1.4.1.11.2.14.11.15.2.127.7.1.1.1.1.1,HPN-ICF-FDMI-MIB::hpnicfFdmiHbaInfoFabricIndex,Unsigned32,not-accessible,,current,,The ID of the VSAN.
.1.3.6.1.4.1.11.2.14.11.15.2.127.7.1.1.1.1.2,HPN-ICF-FDMI-MIB::hpnicfFdmiHbaInfoId,OCTET,not-accessible,,current,,The World Wide Name (WWN) of this HBA.
.1.3.6.1.4.1.11.2.14.11.15.2.127.7.1.1.1.1.3,HPN-ICF-FDMI-MIB::hpnicfFdmiHbaInfoNodeName,OCTET,read-only,,current,,The WWN of the node containing this HBA. 
.1.3.6.1.4.1.11.2.14.11.15.2.127.7.1.1.1.1.4,HPN-ICF-FDMI-MIB::hpnicfFdmiHbaInfoMfg,OCTET,read-only,,current,,The name of the manufacturer of this HBA.
.1.3.6.1.4.1.11.2.14.11.15.2.127.7.1.1.1.1.5,HPN-ICF-FDMI-MIB::hpnicfFdmiHbaInfoSn,OCTET,read-only,,current,,The serial number of this HBA.
.1.3.6.1.4.1.11.2.14.11.15.2.127.7.1.1.1.1.6,HPN-ICF-FDMI-MIB::hpnicfFdmiHbaInfoModel,OCTET,read-only,,current,,The model of this HBA.
.1.3.6.1.4.1.11.2.14.11.15.2.127.7.1.1.1.1.7,HPN-ICF-FDMI-MIB::hpnicfFdmiHbaInfoModelDescr,OCTET,read-only,,current,,The string that describes the model of this HBA.
.1.3.6.1.4.1.11.2.14.11.15.2.127.7.1.1.1.1.8,HPN-ICF-FDMI-MIB::hpnicfFdmiHbaInfoHwVer,OCTET,read-only,,current,,The hardware version of this HBA.
.1.3.6.1.4.1.11.2.14.11.15.2.127.7.1.1.1.1.9,HPN-ICF-FDMI-MIB::hpnicfFdmiHbaInfoDriverVer,OCTET,read-only,,current,,The version of the driver software controlling this HBA.
.1.3.6.1.4.1.11.2.14.11.15.2.127.7.1.1.1.1.10,HPN-ICF-FDMI-MIB::hpnicfFdmiHbaInfoOptROMVer,OCTET,read-only,,current,,The version of the Option ROM or the BIOS of this HBA.
.1.3.6.1.4.1.11.2.14.11.15.2.127.7.1.1.1.1.11,HPN-ICF-FDMI-MIB::hpnicfFdmiHbaInfoFwVer,OCTET,read-only,,current,,The version of the firmware executed by this HBA.
.1.3.6.1.4.1.11.2.14.11.15.2.127.7.1.1.1.1.12,HPN-ICF-FDMI-MIB::hpnicfFdmiHbaInfoOSInfo,OCTET,read-only,,current,,The type and version of the operating system controlling this HBA.
.1.3.6.1.4.1.11.2.14.11.15.2.127.7.1.1.1.1.13,HPN-ICF-FDMI-MIB::hpnicfFdmiHbaInfoMaxCTPayload,Unsigned32,read-only,,current,,The maximum size of the Common Transport (CT) payload including all CT headers but no FC frame headers, that may be sent or received by application software resident in the host containing this HBA. The unit is 32-bit words.
.1.3.6.1.4.1.11.2.14.11.15.2.127.7.1.1.2,HPN-ICF-FDMI-MIB::hpnicfFdmiHbaPortTable,,not-accessible,,current,,List of ports registered with Fabric Device Management Interface.
.1.3.6.1.4.1.11.2.14.11.15.2.127.7.1.1.2.1,HPN-ICF-FDMI-MIB::hpnicfFdmiHbaPortEntry,,not-accessible,fcmInstanceIndex:hpnicfFdmiHbaInfoFabricIndex:hpnicfFdmiHbaInfoId:hpnicfFdmiHbaPortId,current,,An entry (conceptual row) in this table. It contains information about the Nx_port on the HBA, on the VSAN where the registration of the HBA with FDMI was received. If the HBA has registered some but not all of the information represented by the columnar objects in this table, then the value of the unregistered objects will be either the zero-length string (for string-based objects) or the zero value (for integer-based objects).
.1.3.6.1.4.1.11.2.14.11.15.2.127.7.1.1.2.1.1,HPN-ICF-FDMI-MIB::hpnicfFdmiHbaPortId,OCTET,not-accessible,,current,,The WWN of the port.
.1.3.6.1.4.1.11.2.14.11.15.2.127.7.1.1.2.1.2,HPN-ICF-FDMI-MIB::hpnicfFdmiHbaPortSupportedFC4Type,OCTET,read-only,,current,,The supported FC-4 types attribute registered for this port on this VSAN. This is an array of 256 bits (32 bytes). The order of the bits in the 256-bit (32-byte) value is represented in network-byte order. If no FC-4 types has been registered, then the value of this object is the zero-length string.
.1.3.6.1.4.1.11.2.14.11.15.2.127.7.1.1.2.1.3,HPN-ICF-FDMI-MIB::hpnicfFdmiHbaPortSupportedSpeed,Unsigned32,read-only,,current,,The supported speed registered for this port on this VSAN. It is a bitmask that indicates the Fibre Channel Transmission Speeds that are supported on this port.
.1.3.6.1.4.1.11.2.14.11.15.2.127.7.1.1.2.1.4,HPN-ICF-FDMI-MIB::hpnicfFdmiHbaPortCurrentSpeed,Unsigned32,read-only,,current,,The current speed registered for this port on this VSAN. It is a bitmask that indicates the Fibre Channel Transmission Speed at which this port is currently operating.
.1.3.6.1.4.1.11.2.14.11.15.2.127.7.1.1.2.1.5,HPN-ICF-FDMI-MIB::hpnicfFdmiHbaPortMaxFrameSize,Unsigned32,read-only,,current,,The maximum frame size attribute registered for this port on this VSAN. The unit is bytes.
.1.3.6.1.4.1.11.2.14.11.15.2.127.7.1.1.2.1.6,HPN-ICF-FDMI-MIB::hpnicfFdmiHbaPortOsDevName,OCTET,read-only,,current,,The OS device name attribute registered for this port on this VSAN.
.1.3.6.1.4.1.11.2.14.11.15.2.127.7.1.1.2.1.7,HPN-ICF-FDMI-MIB::hpnicfFdmiHbaPortHostName,OCTET,read-only,,current,,The name of the host associated with this port.
.1.3.6.1.4.1.11.2.14.11.15.2.127.8,HPN-ICF-FC-PSM-MIB::hpnicfFcPsm,,,,,,This MIB contains the objects for FC port security.
.1.3.6.1.4.1.11.2.14.11.15.2.127.8.0,HPN-ICF-FC-PSM-MIB::hpnicfFcPsmNotifications,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.2.127.8.0.1,HPN-ICF-FC-PSM-MIB::hpnicfFcPsmFPortDenyNotify,,,,,,Notifies that a FLOGI is denied on an F port of the local device.
.1.3.6.1.4.1.11.2.14.11.15.2.127.8.0.2,HPN-ICF-FC-PSM-MIB::hpnicfFcPsmEPortDenyNotify,,,,,,Notifies that a switch is denied on an E port of the local device.
.1.3.6.1.4.1.11.2.14.11.15.2.127.8.1,HPN-ICF-FC-PSM-MIB::hpnicfFcPsmObjects,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.2.127.8.1.1,HPN-ICF-FC-PSM-MIB::hpnicfFcPsmScalarObjects,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.2.127.8.1.1.1,HPN-ICF-FC-PSM-MIB::hpnicfFcPsmNotifyEnable,INTEGER,read-write,,current,true(1):false(2),Whether to generate the notification or not depends on the object.
.1.3.6.1.4.1.11.2.14.11.15.2.127.8.1.2,HPN-ICF-FC-PSM-MIB::hpnicfFcPsmConfiguration,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.2.127.8.1.2.1,HPN-ICF-FC-PSM-MIB::hpnicfFcPsmEnableTable,,not-accessible,,current,,Enable or disable the port security feature on a specified VSAN.
.1.3.6.1.4.1.11.2.14.11.15.2.127.8.1.2.1.1,HPN-ICF-FC-PSM-MIB::hpnicfFcPsmEnableEntry,,not-accessible,hpnicfFcPsmEnableVsanIndex,current,,Detailed information about the port security.
.1.3.6.1.4.1.11.2.14.11.15.2.127.8.1.2.1.1.1,HPN-ICF-FC-PSM-MIB::hpnicfFcPsmEnableVsanIndex,Unsigned32,not-accessible,,current,,The ID of VSAN on this entry.
.1.3.6.1.4.1.11.2.14.11.15.2.127.8.1.2.1.1.2,HPN-ICF-FC-PSM-MIB::hpnicfFcPsmEnable,INTEGER,read-write,,current,enable(1):enableWithAutoLearn(2):disable(3):noop(4),When set to enable, the port security is on, the value of hpnicfFcPsmEnableState will be true. When set to enableWithAutoLearn, the port security is on with auto-learning, the value of hpnicfFcPsmEnableState will be true. When set to disable, the port security is off, the value of hpnicfFcPsmEnableState will be false. The noop means no action. The value of this object when read is always noop.
.1.3.6.1.4.1.11.2.14.11.15.2.127.8.1.2.1.1.3,HPN-ICF-FC-PSM-MIB::hpnicfFcPsmEnableState,INTEGER,read-only,,current,true(1):false(2),The state of the port security. When the value is true, it means the port security is on, while the false means the port security is off.
.1.3.6.1.4.1.11.2.14.11.15.2.127.8.1.2.2,HPN-ICF-FC-PSM-MIB::hpnicfFcPsmConfigTable,,not-accessible,,current,,A table that contains the configured entries.
.1.3.6.1.4.1.11.2.14.11.15.2.127.8.1.2.2.1,HPN-ICF-FC-PSM-MIB::hpnicfFcPsmConfigEntry,,not-accessible,hpnicfFcPsmEnableVsanIndex:hpnicfFcPsmIndex,current,,Detailed information about each configuration.
.1.3.6.1.4.1.11.2.14.11.15.2.127.8.1.2.2.1.1,HPN-ICF-FC-PSM-MIB::hpnicfFcPsmIndex,Unsigned32,not-accessible,,current,,The index of this entry.
.1.3.6.1.4.1.11.2.14.11.15.2.127.8.1.2.2.1.2,HPN-ICF-FC-PSM-MIB::hpnicfFcPsmLoginDevType,INTEGER,read-create,,current,nWWN(1):pWWN(2):sWWN(3):wildCard(4),This represents the type of the instance of hpnicfFcPsmLoginDev, which includes nWWN, pWWN, sWWN, and wildCard.
.1.3.6.1.4.1.11.2.14.11.15.2.127.8.1.2.2.1.3,HPN-ICF-FC-PSM-MIB::hpnicfFcPsmLoginDev,OCTET,read-create,,current,,The logging-in device name, which is decided by the hpnicfFcPsmLoginDevType object. It represents node WWN when the value of hpnicfFcPsmLoginDevType is nWWN. It represents port WWN when the value of hpnicfFcPsmLoginDevType is pWWN. It represents switch WWN when the value of hpnicfFcPsmLoginDevType is sWWN. It represents any device when the value of hpnicfFcPsmLoginDevType is wildCard, and the value of the instance of this object should be zero-length string. The value of this object should not be invalid when hpnicfFcPsmRowStatus is set to createAndGo or active.
.1.3.6.1.4.1.11.2.14.11.15.2.127.8.1.2.2.1.4,HPN-ICF-FC-PSM-MIB::hpnicfFcPsmLoginPoint,Integer32,read-create,,current,,The address of the port on the local switch through which the instance of hpnicfFcPsmLoginDev can log in. It represents ifindex when the value is not zero. It represents any port when the value is zero.
.1.3.6.1.4.1.11.2.14.11.15.2.127.8.1.2.2.1.5,HPN-ICF-FC-PSM-MIB::hpnicfFcPsmRowStatus,INTEGER,read-create,,current,active(1):notInService(2):notReady(3):createAndGo(4):createAndWait(5):destroy(6),Entry status. When creating a new instance of this table, the following objects should be set simultaneously: hpnicfFcPsmLoginDevType, h3cFcPsmLoginDev, hpnicfFcPsmLoginPoint, hpnicfFcPsmRowStatus. If hpnicfFcPsmLoginDevType is set to wildCard, the value of the instance of hpnicfFcPsmLoginDev should be zero-length string. The value of hpnicfFcPsmLoginDevType and hpnicfFcPsmLoginPoint cannot be set to wildCard and zero at the same time.
.1.3.6.1.4.1.11.2.14.11.15.2.127.8.1.2.3,HPN-ICF-FC-PSM-MIB::hpnicfFcPsmEnfTable,,not-accessible,,current,,The FC port security enforced table. It contains not only the configured policies, but also the learning ones learnt by the switch itself.
.1.3.6.1.4.1.11.2.14.11.15.2.127.8.1.2.3.1,HPN-ICF-FC-PSM-MIB::hpnicfFcPsmEnfEntry,,not-accessible,hpnicfFcPsmEnableVsanIndex:hpnicfFcPsmEnfIndex,current,,Detailed information about the FC port security enforced policy.
.1.3.6.1.4.1.11.2.14.11.15.2.127.8.1.2.3.1.1,HPN-ICF-FC-PSM-MIB::hpnicfFcPsmEnfIndex,Unsigned32,not-accessible,,current,,The index of this entry.
.1.3.6.1.4.1.11.2.14.11.15.2.127.8.1.2.3.1.2,HPN-ICF-FC-PSM-MIB::hpnicfFcPsmEnfLoginDevType,INTEGER,read-only,,current,nWWN(1):pWWN(2):sWWN(3):wildCard(4),This represents the type of the instance of hpnicfFcPsmEnfLoginDev, which includes nWWN, pWWN, sWWN, and wildCard.
.1.3.6.1.4.1.11.2.14.11.15.2.127.8.1.2.3.1.3,HPN-ICF-FC-PSM-MIB::hpnicfFcPsmEnfLoginDev,OCTET,read-only,,current,,The logging-in device name, which is decided by the hpnicfFcPsmEnfLoginDevType object. It represents node WWN when the value of hpnicfFcPsmEnfLoginDevType is nWWN. It represents port WWN when the value of hpnicfFcPsmEnfLoginDevType is pWWN. It represents switch WWN when the value of hpnicfFcPsmEnfLoginDevType is sWWN. It represents any device when the value of hpnicfFcPsmEnfLoginDevType is wildCard, and the value of the instance of this object should be zero-length string.
.1.3.6.1.4.1.11.2.14.11.15.2.127.8.1.2.3.1.4,HPN-ICF-FC-PSM-MIB::hpnicfFcPsmEnfLoginPoint,Integer32,read-only,,current,,The address of the port on the local switch through which the instance of hpnicfFcPsmEnfLoginDev can log in. It represents ifindex when the value is not zero. It represents any port when the value is zero.
.1.3.6.1.4.1.11.2.14.11.15.2.127.8.1.2.3.1.5,HPN-ICF-FC-PSM-MIB::hpnicfFcPsmEnfEntryType,INTEGER,read-only,,current,learning(1):learnt(2):static(3),When the value is learning, it represents the entry is learnt by the switch itself temporarily and will be deleted when the device log out. When the value is learnt, it represents the entry is learnt by the switch permanently. When the value is static, it represents the entry is configured.
.1.3.6.1.4.1.11.2.14.11.15.2.127.8.1.2.4,HPN-ICF-FC-PSM-MIB::hpnicfFcPsmCopyToConfigTable,,not-accessible,,current,,Specifies whether to copy the entries from enforced table to the ones on configured table.
.1.3.6.1.4.1.11.2.14.11.15.2.127.8.1.2.4.1,HPN-ICF-FC-PSM-MIB::hpnicfFcPsmCopyToConfigEntry,,not-accessible,hpnicfFcPsmEnableVsanIndex,current,,Detailed information about the operation.
.1.3.6.1.4.1.11.2.14.11.15.2.127.8.1.2.4.1.1,HPN-ICF-FC-PSM-MIB::hpnicfFcPsmCopyToConfig,INTEGER,read-write,,current,copy(1):noop(2),When the object is set to copy, the learned entries will be copied on to the configured table on this VSAN, while the noop means no operation. The value of this object when read is always noop.
.1.3.6.1.4.1.11.2.14.11.15.2.127.8.1.2.5,HPN-ICF-FC-PSM-MIB::hpnicfFcPsmAutoLearnTable,,not-accessible,,current,,This table shows whether the auto-learning is enabled or not on specific VSANs.
.1.3.6.1.4.1.11.2.14.11.15.2.127.8.1.2.5.1,HPN-ICF-FC-PSM-MIB::hpnicfFcPsmAutoLearnEntry,,not-accessible,hpnicfFcPsmEnableVsanIndex,current,,Detailed information about the auto-learning.
.1.3.6.1.4.1.11.2.14.11.15.2.127.8.1.2.5.1.1,HPN-ICF-FC-PSM-MIB::hpnicfFcPsmAutoLearnEnable,INTEGER,read-write,,current,true(1):false(2),This object is set to true to enable, or false to disable auto-learning on the local switch. When set to true, the switch can learn the devices that have already logged in as learning entries on the enforced table, while the false can stop the learning operation with the learning entries transformed to learnt ones.
.1.3.6.1.4.1.11.2.14.11.15.2.127.8.1.2.6,HPN-ICF-FC-PSM-MIB::hpnicfFcPsmClearTable,,not-accessible,,current,,This table is used for cleaning specific entries in enforced table.
.1.3.6.1.4.1.11.2.14.11.15.2.127.8.1.2.6.1,HPN-ICF-FC-PSM-MIB::hpnicfFcPsmClearEntry,,not-accessible,hpnicfFcPsmEnableVsanIndex,current,,Detailed information about the cleaning options.
.1.3.6.1.4.1.11.2.14.11.15.2.127.8.1.2.6.1.1,HPN-ICF-FC-PSM-MIB::hpnicfFcPsmClearType,INTEGER,read-write,,current,clearStatic(1):clearAutoLearn(2):clearAll(3):noop(4),This object when set to clearStatic, results in port bind static entries being cleared on this VSAN. This object when set to clearAutoLearn, results in auto-learnt entries being cleared on this VSAN. This object when set to clearAll, results in all of the port bind entries being cleared on this VSAN. No action is taken if this object is set to noop. The value of this object when read is always noop.
.1.3.6.1.4.1.11.2.14.11.15.2.127.8.1.2.6.1.2,HPN-ICF-FC-PSM-MIB::hpnicfFcPsmClearIntf,Integer32,read-write,,current,,The object specifies the interface on which the entries will be cleared. If the object is zero or not set, it means the specified entries on all interfaces will be cleared.
.1.3.6.1.4.1.11.2.14.11.15.2.127.8.1.3,HPN-ICF-FC-PSM-MIB::hpnicfFcPsmStats,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.2.127.8.1.3.1,HPN-ICF-FC-PSM-MIB::hpnicfFcPsmStatsTable,,not-accessible,,current,,This table contains statistics of devices, which had been allowed or denied to log into the switch.
.1.3.6.1.4.1.11.2.14.11.15.2.127.8.1.3.1.1,HPN-ICF-FC-PSM-MIB::hpnicfFcPsmStatsEntry,,not-accessible,hpnicfFcPsmEnableVsanIndex,current,,Detailed information about the statistics.
.1.3.6.1.4.1.11.2.14.11.15.2.127.8.1.3.1.1.1,HPN-ICF-FC-PSM-MIB::hpnicfFcPsmAllowedLogins,Counter32,read-only,,current,,The number of requests that have been allowed on the specified VSAN.
.1.3.6.1.4.1.11.2.14.11.15.2.127.8.1.3.1.1.2,HPN-ICF-FC-PSM-MIB::hpnicfFcPsmDeniedLogins,Counter32,read-only,,current,,The number of requests that have been denied on the specified VSAN.
.1.3.6.1.4.1.11.2.14.11.15.2.127.8.1.3.1.1.3,HPN-ICF-FC-PSM-MIB::hpnicfFcPsmStatsClear,INTEGER,read-write,,current,clear(1):noop(2),The statistics on this VSAN will be cleared if this object is set to clear. No action is taken if this object is set to noop. The value of this object when read is always noop.
.1.3.6.1.4.1.11.2.14.11.15.2.127.8.1.3.2,HPN-ICF-FC-PSM-MIB::hpnicfFcPsmViolationTable,,not-accessible,,current,,This table maintains the information about the violations happened, containing at most 1024 items. When the number exceeds 1024, the earliest item will be over-written.
.1.3.6.1.4.1.11.2.14.11.15.2.127.8.1.3.2.1,HPN-ICF-FC-PSM-MIB::hpnicfFcPsmViolationEntry,,not-accessible,hpnicfFcPsmEnableVsanIndex:hpnicfFcPsmViolationIndex,current,,Detailed information about the violation.
.1.3.6.1.4.1.11.2.14.11.15.2.127.8.1.3.2.1.1,HPN-ICF-FC-PSM-MIB::hpnicfFcPsmViolationIndex,Unsigned32,not-accessible,,current,,The index of this entry. The entry is uniquely distinguished by WWN, WWN type and ifindex where the login was denied.
.1.3.6.1.4.1.11.2.14.11.15.2.127.8.1.3.2.1.2,HPN-ICF-FC-PSM-MIB::hpnicfFcPsmLoginPWWN,OCTET,read-only,,current,,The pWWN of the device whose FLOGI(Fabric Login) request had been denied. If the device is an n-node, the value of the instance of hpnicfFcPsmLoginSWWN should be zero-length string.
.1.3.6.1.4.1.11.2.14.11.15.2.127.8.1.3.2.1.3,HPN-ICF-FC-PSM-MIB::hpnicfFcPsmLoginNWWN,OCTET,read-only,,current,,The nWWN of the device whose FLOGI request had been denied. If the device is an n-node, the value of the instance of hpnicfFcPsmLoginSWWN should be zero-length string.
.1.3.6.1.4.1.11.2.14.11.15.2.127.8.1.3.2.1.4,HPN-ICF-FC-PSM-MIB::hpnicfFcPsmLoginSWWN,OCTET,read-only,,current,,The sWWN of the device whose FLOGI request had been denied. If the device is a switch, the values of the instance of hpnicfFcPsmLoginPWWN and hpnicfFcPsmLoginNWWN should be zero-length string.
.1.3.6.1.4.1.11.2.14.11.15.2.127.8.1.3.2.1.5,HPN-ICF-FC-PSM-MIB::hpnicfFcPsmLoginIntf,Integer32,read-only,,current,,The ifindex of the port where the login was denied.
.1.3.6.1.4.1.11.2.14.11.15.2.127.8.1.3.2.1.6,HPN-ICF-FC-PSM-MIB::hpnicfFcPsmLoginTime,TimeTicks,read-only,,current,,Specifies the value of SysUpTime when the last denied login happened.
.1.3.6.1.4.1.11.2.14.11.15.2.127.8.1.3.2.1.7,HPN-ICF-FC-PSM-MIB::hpnicfFcPsmLoginCount,Counter32,read-only,,current,,The number of times for a certain nWWN/pWWN or sWWN had been denied to log into an interface of the local device.
.1.3.6.1.4.1.11.2.14.11.15.2.128,HPN-ICF-OID-MIB::hpnicfSpb,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.2.129,HPN-ICF-OID-MIB::hpnicfPex,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.2.129.1,HPN-ICF-PEX-MIB::hpnicfPexSpecInfo,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.2.129.1.1,HPN-ICF-PEX-MIB::hpnicfPexPortMinId,Integer32,read-only,,current,,Lowest PEX port ID that can be used to uniquely identify a PEX port.
.1.3.6.1.4.1.11.2.14.11.15.2.129.1.2,HPN-ICF-PEX-MIB::hpnicfPexPortMaxId,Integer32,read-only,,current,,Highest PEX port ID that can be used to uniquely identify a PEX port.
.1.3.6.1.4.1.11.2.14.11.15.2.129.1.3,HPN-ICF-PEX-MIB::hpnicfPexMinAssociateId,Integer32,read-only,,current,,Lowest ID that can be assigned to a port extender (PEX).
.1.3.6.1.4.1.11.2.14.11.15.2.129.1.4,HPN-ICF-PEX-MIB::hpnicfPexMaxAssociateId,Integer32,read-only,,current,,Highest ID that can be assigned to a PEX.
.1.3.6.1.4.1.11.2.14.11.15.2.129.1.5,HPN-ICF-PEX-MIB::hpnicfPexMaxPortPerPexPort,Integer32,read-only,,current,,Maximum number of ports that can be bound to a PEX port.
.1.3.6.1.4.1.11.2.14.11.15.2.129.2,HPN-ICF-PEX-MIB::hpnicfPexTable,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.2.129.2.1,HPN-ICF-PEX-MIB::hpnicfPexPortTable,,not-accessible,,current,,This table contains objects used to configure the PEX ports.
.1.3.6.1.4.1.11.2.14.11.15.2.129.2.1.1,HPN-ICF-PEX-MIB::hpnicfPexPortEntry,,not-accessible,hpnicfPexPortId,current,,Information about a PEX.
.1.3.6.1.4.1.11.2.14.11.15.2.129.2.1.1.1,HPN-ICF-PEX-MIB::hpnicfPexPortId,Integer32,accessible-for-notify,,current,,ID that can be used to uniquely identify a PEX port. The value range is hpnicfPexPortMinId to hpnicfPexPortMaxId.
.1.3.6.1.4.1.11.2.14.11.15.2.129.2.1.1.2,HPN-ICF-PEX-MIB::hpnicfPexPortAssociateId,Integer32,read-create,,current,,ID assigned to a PEX. The value range is hpnicfPexMinAssociateId to hpnicfPexMaxAssociateId. The value is 0xffff if the PEX is not assigned an ID. For a successful configuration, the ID should not be used by any other PEX.
.1.3.6.1.4.1.11.2.14.11.15.2.129.2.1.1.3,HPN-ICF-PEX-MIB::hpnicfPexPortEntPhysicalIndex,Integer32,read-only,,current,,Entity index of a PEX in the IRF. A value of zero indicates that the PEX is not online.
.1.3.6.1.4.1.11.2.14.11.15.2.129.2.1.1.4,HPN-ICF-PEX-MIB::hpnicfPexPortDescr,OCTET,read-create,,current,,Description for the PEX port. The default value is 'pex-port XXXX', where 'XXXX' is hpnicfPexPortId. Writing a zero-length string to this object resets the value to the default.
.1.3.6.1.4.1.11.2.14.11.15.2.129.2.1.1.5,HPN-ICF-PEX-MIB::hpnicfPexPortStatus,INTEGER,read-only,,current,offline(1):loading(2):online(3),Status of the PEX. offline: The PEX is absent or its configuration is incomplete. loading: The PEX is loading software. online: The PEX is operating correctly.
.1.3.6.1.4.1.11.2.14.11.15.2.129.2.1.1.6,HPN-ICF-PEX-MIB::hpnicfPexPortRowStatus,INTEGER,read-create,,current,active(1):notInService(2):notReady(3):createAndGo(4):createAndWait(5):destroy(6),The control that allows creation and deletion of entries. Values include createAndGo, active, and destroy. If the row to be created or modified already exists, an error message is returned. If the row to be deleted does not exist, a success message is returned.
.1.3.6.1.4.1.11.2.14.11.15.2.129.2.2,HPN-ICF-PEX-MIB::hpnicfPexPhyPortTable,,not-accessible,,current,,This table contains objects used to manage physical ports that can be bound or are already bound to a PEX port.
.1.3.6.1.4.1.11.2.14.11.15.2.129.2.2.1,HPN-ICF-PEX-MIB::hpnicfPexPhyPortEntry,,not-accessible,entPhysicalIndex,current,,Information about a physical port that can be bound to or has been bound to a PEX port.
.1.3.6.1.4.1.11.2.14.11.15.2.129.2.2.1.1,HPN-ICF-PEX-MIB::hpnicfPexPhyPortStatus,INTEGER,read-only,,current,unknown(1):down(2):blocked(3):forwarding(4),Status of the physical port that is bound to a PEX port. The following are status values: unknown: The physical port is not bound to any PEX port. down: The physical port is link down. blocked: The physical port is blocked and cannot forward traffic. forwarding: The physical port can forwarding traffic.
.1.3.6.1.4.1.11.2.14.11.15.2.129.2.2.1.2,HPN-ICF-PEX-MIB::hpnicfPexPhyPortBelongToPexPort,Integer32,read-write,,current,,ID of the PEX port to which the physical port belongs. The value range is hpnicfPexPortMinId to hpnicfPexPortMaxId. A value of zero indicates that the port doesn't belong to any PEX port.
.1.3.6.1.4.1.11.2.14.11.15.2.129.2.2.1.3,HPN-ICF-PEX-MIB::hpnicfPexPhyPortNeighborEntIndex,Integer32,read-only,,current,,Entity index of a physical port that connects the PEX to the parent device. This value is identical to entPhysicalIndex in ENTITY-MIB. A value of zero indicates that the physical port is not bound to any PEX port or is not up.
.1.3.6.1.4.1.11.2.14.11.15.2.129.3,HPN-ICF-PEX-MIB::hpnicfPexTraps,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.2.129.3.0,HPN-ICF-PEX-MIB::hpnicfPexTrapPrefix,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.2.129.3.0.1,HPN-ICF-PEX-MIB::hpnicfPexPortOnline,,,,,,An hpnicfPexPortOnline trap is sent when the PEX transitions to online state.
.1.3.6.1.4.1.11.2.14.11.15.2.129.3.0.2,HPN-ICF-PEX-MIB::hpnicfPexPortOffline,,,,,,An hpnicfPexPortOnline trap is sent when the PEX transitions to offline state.
.1.3.6.1.4.1.11.2.14.11.15.2.129.3.0.3,HPN-ICF-PEX-MIB::hpnicfPexPhyPortForwarding,,,,,,An hpnicfPexPhyPortForwarding trap is sent when the PEX physical port transitions to forwarding state.
.1.3.6.1.4.1.11.2.14.11.15.2.129.3.0.4,HPN-ICF-PEX-MIB::hpnicfPexPhyPortBlocked,,,,,,An hpnicfPexPhyPortBlocked trap is sent when the PEX physical port transitions from forwarding state to blocked state.
.1.3.6.1.4.1.11.2.14.11.15.2.129.4,HPN-ICF-PEX-MIB::hpnicfPexTrapObjects,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.2.129.4.1,HPN-ICF-PEX-MIB::hpnicfPexEntPhysicalIndexBind,Integer32,accessible-for-notify,,current,,This index is identical to entPhysicalIndex in ENTITY-MIB.
.1.3.6.1.4.1.11.2.14.11.15.2.130,HPN-ICF-OID-MIB::hpnicfSlbg,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.2.130.1,HPN-ICF-SLBG-MIB::hpnicfSlbgMibTable,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.2.130.1.1,HPN-ICF-SLBG-MIB::hpnicfSlbgGroupTable,,not-accessible,,current,,A table of service loopback group objects.
.1.3.6.1.4.1.11.2.14.11.15.2.130.1.1.1,HPN-ICF-SLBG-MIB::hpnicfSlbgGroupEntry,,not-accessible,hpnicfSlbgGroupNumber,current,,The service loopback group entry.
.1.3.6.1.4.1.11.2.14.11.15.2.130.1.1.1.1,HPN-ICF-SLBG-MIB::hpnicfSlbgGroupNumber,Unsigned32,not-accessible,,current,,Serial number of the service loopback group.
.1.3.6.1.4.1.11.2.14.11.15.2.130.1.1.1.2,HPN-ICF-SLBG-MIB::hpnicfSlbgGroupSrvType,BITS,read-create,,current,ipv6(0):ipv6mc(1):tunnel(2):multicastTunnel(3):mpls(4),Service type of the service loopback group. ipv6: IPv6 unicast service type. ipv6mc: IPv6 multicast service type. tunnel: Unicast tunnel service type. multicastTunnel: Multicast tunnel service type. mpls: MPLS service type.
.1.3.6.1.4.1.11.2.14.11.15.2.130.1.1.1.3,HPN-ICF-SLBG-MIB::hpnicfSlbgGroupRowStatus,INTEGER,read-create,,current,active(1):notInService(2):notReady(3):createAndGo(4):createAndWait(5):destroy(6),This object is used to create, modify, or delete rows. hpnicfSlbgGroupNumber and hpnicfSlbgGroupSrvType must have a valid value before a row can be activated.
.1.3.6.1.4.1.11.2.14.11.15.2.130.1.2,HPN-ICF-SLBG-MIB::hpnicfSlbgPortTable,,not-accessible,,current,,A table of port objects.
.1.3.6.1.4.1.11.2.14.11.15.2.130.1.2.1,HPN-ICF-SLBG-MIB::hpnicfSlbgPortEntry,,not-accessible,hpnicfSlbgPortIndex,current,,The service loopback group port entry.
.1.3.6.1.4.1.11.2.14.11.15.2.130.1.2.1.1,HPN-ICF-SLBG-MIB::hpnicfSlbgPortIndex,Integer32,not-accessible,,current,,Interface index of the port, which is defined in RFC1213 (MIB-II).
.1.3.6.1.4.1.11.2.14.11.15.2.130.1.2.1.2,HPN-ICF-SLBG-MIB::hpnicfSlbgPortAttachedGroupNumber,Unsigned32,read-write,,current,,The value of the service group number to which this port is assigned. The value is zero if the port is not assigned to any service loopback group.
.1.3.6.1.4.1.11.2.14.11.15.2.130.1.2.1.3,HPN-ICF-SLBG-MIB::hpnicfSlbgPortSelectedGroupNumber,Unsigned32,read-only,,current,,The value of the service group number to which this selected port is assigned. The value is zero if the port is not selected or not assigned to any service loopback group.
.1.3.6.1.4.1.11.2.14.11.15.2.132,HPN-ICF-OID-MIB::hpnicfEvi,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.2.132.0,HPN-ICF-EVI-MIB::hpnicfEviNotifications,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.2.132.0.1,HPN-ICF-EVI-MIB::hpnicfEviNewDed,,,,,,Notifies that a new DED has been elected.
.1.3.6.1.4.1.11.2.14.11.15.2.132.0.2,HPN-ICF-EVI-MIB::hpnicfEviSiteEDTopoChange,,,,,,Notifies that the EVI network topology has changed.
.1.3.6.1.4.1.11.2.14.11.15.2.132.0.3,HPN-ICF-EVI-MIB::hpnicfEviEDLinkDisconnect,,,,,,Notifies that all the EVI links on a tunnel are down.
.1.3.6.1.4.1.11.2.14.11.15.2.132.1,HPN-ICF-EVI-MIB::hpnicfEviObjects,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.2.132.1.1,HPN-ICF-EVI-MIB::hpnicfEviBase,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.2.132.1.1.1,HPN-ICF-EVI-MIB::hpnicfEviDesignatedVlan,Integer32,read-write,,current,,The designated VLAN is used for edge devices on a multihomed site to exchange EVI IS-IS hello packets for DED election and extended-VLAN assignment.
.1.3.6.1.4.1.11.2.14.11.15.2.132.1.1.2,HPN-ICF-EVI-MIB::hpnicfEviSiteID,Integer32,read-write,,current,,Site ID. The edge devices in the same site must have the same site ID.
.1.3.6.1.4.1.11.2.14.11.15.2.132.1.2,HPN-ICF-EVI-MIB::hpnicfEviIf,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.2.132.1.2.1,HPN-ICF-EVI-MIB::hpnicfEviIfExtendVlanTable,,not-accessible,,current,,A table that contains extended VLAN entries. A site extends extended VLANs to remote sites over an EVI tunnel.
.1.3.6.1.4.1.11.2.14.11.15.2.132.1.2.1.1,HPN-ICF-EVI-MIB::hpnicfEviIfExtendVlanEntry,,not-accessible,ifIndex:hpnicfEviIfExtendVlanIndex,current,,Detailed information about each extended VLAN.
.1.3.6.1.4.1.11.2.14.11.15.2.132.1.2.1.1.1,HPN-ICF-EVI-MIB::hpnicfEviIfExtendVlanIndex,Integer32,not-accessible,,current,,Each VLAN index specifies a VLAN ID in the range of 1 to 4094.
.1.3.6.1.4.1.11.2.14.11.15.2.132.1.2.1.1.2,HPN-ICF-EVI-MIB::hpnicfEviIfExtendVlanLAV,INTEGER,read-only,,current,true(1):false(2),Local Active VLANs (LAVs), which are active VLANs on the EVI tunnel interface. The interface can extend only active VLANs to remote sites.
.1.3.6.1.4.1.11.2.14.11.15.2.132.1.2.1.1.3,HPN-ICF-EVI-MIB::hpnicfEviIfExtendVlanRowStatus,INTEGER,read-create,,current,active(1):notInService(2):notReady(3):createAndGo(4):createAndWait(5):destroy(6),Entry status.
.1.3.6.1.4.1.11.2.14.11.15.2.132.1.2.2,HPN-ICF-EVI-MIB::hpnicfEviIfVlanMappingTable,,not-accessible,,current,,VLAN mapping table on the interface.
.1.3.6.1.4.1.11.2.14.11.15.2.132.1.2.2.1,HPN-ICF-EVI-MIB::hpnicfEviIfVlanMappingEntry,,not-accessible,ifIndex:hpnicfEviIfVlanMappingSiteId:hpnicfEviIfVlanMappingSrc:hpnicfEviIfVlanMappingDst,current,,Detailed information about each VLAN mapping.
.1.3.6.1.4.1.11.2.14.11.15.2.132.1.2.2.1.1,HPN-ICF-EVI-MIB::hpnicfEviIfVlanMappingSiteId,Integer32,not-accessible,,current,,Site ID of the interface on which the VLAN mapping is configured. If '0' is specified, the operation applies to all sites.
.1.3.6.1.4.1.11.2.14.11.15.2.132.1.2.2.1.2,HPN-ICF-EVI-MIB::hpnicfEviIfVlanMappingSrc,Integer32,not-accessible,,current,,Local VLAN ID in the mapping.
.1.3.6.1.4.1.11.2.14.11.15.2.132.1.2.2.1.3,HPN-ICF-EVI-MIB::hpnicfEviIfVlanMappingDst,Integer32,not-accessible,,current,,Remote VLAN ID in the mapping.
.1.3.6.1.4.1.11.2.14.11.15.2.132.1.2.2.1.4,HPN-ICF-EVI-MIB::hpnicfEviIfVlanMappingRowStatus,INTEGER,read-create,,current,active(1):notInService(2):notReady(3):createAndGo(4):createAndWait(5):destroy(6),Entry status.
.1.3.6.1.4.1.11.2.14.11.15.2.132.1.2.3,HPN-ICF-EVI-MIB::hpnicfEviIfAttributeTable,,not-accessible,,current,,A table that contains EVI tunnel attribute entries.
.1.3.6.1.4.1.11.2.14.11.15.2.132.1.2.3.1,HPN-ICF-EVI-MIB::hpnicfEviIfAttributeEntry,,not-accessible,ifIndex,current,,Detailed information about the attributes of each EVI tunnel.
.1.3.6.1.4.1.11.2.14.11.15.2.132.1.2.3.1.1,HPN-ICF-EVI-MIB::hpnicfEviIfFloodingMode,INTEGER,read-write,,current,true(1):false(2),State of the EVI flooding function. The function is enabled if the value is set to true.
.1.3.6.1.4.1.11.2.14.11.15.2.132.1.2.3.1.2,HPN-ICF-EVI-MIB::hpnicfEviIfARPSuppression,INTEGER,read-write,,current,true(1):false(2),State of the ARP flooding suppression function. The function is enabled if the value is set to true.
.1.3.6.1.4.1.11.2.14.11.15.2.132.1.2.4,HPN-ICF-EVI-MIB::hpnicfEviIfFloodingMacTable,,not-accessible,,current,,A table that contains MAC addresses configured for selective flooding.
.1.3.6.1.4.1.11.2.14.11.15.2.132.1.2.4.1,HPN-ICF-EVI-MIB::hpnicfEviIfFloodingMacEntry,,not-accessible,ifIndex:hpnicfEviIfFloodingMacAddress:hpnicfEviIfFloodMacVlanIndex,current,,Detailed information about each MAC address used for EVI selective flooding.
.1.3.6.1.4.1.11.2.14.11.15.2.132.1.2.4.1.1,HPN-ICF-EVI-MIB::hpnicfEviIfFloodingMacAddress,OCTET,not-accessible,,current,,MAC address used for EVI selective flooding.
.1.3.6.1.4.1.11.2.14.11.15.2.132.1.2.4.1.2,HPN-ICF-EVI-MIB::hpnicfEviIfFloodMacVlanIndex,Integer32,not-accessible,,current,,The VLAN that contains the MAC address.
.1.3.6.1.4.1.11.2.14.11.15.2.132.1.2.4.1.3,HPN-ICF-EVI-MIB::hpnicfEviIfFloodingMacRowStatus,INTEGER,read-create,,current,active(1):notInService(2):notReady(3):createAndGo(4):createAndWait(5):destroy(6),State of the MAC address entry. You can use this object to create or delete entries. Deleting entries does not delete this object.
.1.3.6.1.4.1.11.2.14.11.15.2.132.1.3,HPN-ICF-EVI-MIB::hpnicfEviMac,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.2.132.1.3.1,HPN-ICF-EVI-MIB::hpnicfEviMacCountTable,,not-accessible,,current,,EVI MAC statistics table. The table contains MAC entry counts sorted by MAC address types, including local MACs, local MAC conflicts, remote MACs, and remote MAC conflicts.
.1.3.6.1.4.1.11.2.14.11.15.2.132.1.3.1.1,HPN-ICF-EVI-MIB::hpnicfEviMacCountEntry,,not-accessible,ifIndex,current,,EVI MAC entry counts.
.1.3.6.1.4.1.11.2.14.11.15.2.132.1.3.1.1.1,HPN-ICF-EVI-MIB::hpnicfEviMacLocalMacs,Counter32,read-only,,current,,Number of local MACs.
.1.3.6.1.4.1.11.2.14.11.15.2.132.1.3.1.1.2,HPN-ICF-EVI-MIB::hpnicfEviMacLocalConflicts,Counter32,read-only,,current,,Number of local MACs that conflict with remote MACs.
.1.3.6.1.4.1.11.2.14.11.15.2.132.1.3.1.1.3,HPN-ICF-EVI-MIB::hpnicfEviMacRemoteMacs,Counter32,read-only,,current,,Number of remote MACs received from remote edge devices.
.1.3.6.1.4.1.11.2.14.11.15.2.132.1.3.1.1.4,HPN-ICF-EVI-MIB::hpnicfEviMacRemoteConflicts,Counter32,read-only,,current,,Number of remote MACs that conflict with local MACs.
.1.3.6.1.4.1.11.2.14.11.15.2.132.1.3.2,HPN-ICF-EVI-MIB::hpnicfEviMacLocalTable,,not-accessible,,current,,MAC address table that only contains MAC addresses at the site.
.1.3.6.1.4.1.11.2.14.11.15.2.132.1.3.2.1,HPN-ICF-EVI-MIB::hpnicfEviMacLocalEntry,,not-accessible,ifIndex:hpnicfEviMacLocalVlan:hpnicfEviMacLocalMacAddr,current,,Detailed informaiton about each local MAC entry.
.1.3.6.1.4.1.11.2.14.11.15.2.132.1.3.2.1.1,HPN-ICF-EVI-MIB::hpnicfEviMacLocalVlan,Integer32,not-accessible,,current,,VLANs that contain the local MACs.
.1.3.6.1.4.1.11.2.14.11.15.2.132.1.3.2.1.2,HPN-ICF-EVI-MIB::hpnicfEviMacLocalMacAddr,OCTET,not-accessible,,current,,Local MAC addresses.
.1.3.6.1.4.1.11.2.14.11.15.2.132.1.3.2.1.3,HPN-ICF-EVI-MIB::hpnicfEviMacLocalMacType,INTEGER,read-only,,current,other(1):dynamic(2):static(3):flood(4),MAC address types, including: dynamic MACs, static MACs, and flood MACs (MACs configured for selective flooding).
.1.3.6.1.4.1.11.2.14.11.15.2.132.1.3.2.1.4,HPN-ICF-EVI-MIB::hpnicfEviMacLocalConflict,INTEGER,read-only,,current,true(1):false(2),Whether the MAC conflicts with any remote MAC.
.1.3.6.1.4.1.11.2.14.11.15.2.132.1.3.2.1.5,HPN-ICF-EVI-MIB::hpnicfEviMacLocalFiltered,INTEGER,read-only,,current,true(1):false(2),Whether the MAC is filtered.
.1.3.6.1.4.1.11.2.14.11.15.2.132.1.3.3,HPN-ICF-EVI-MIB::hpnicfEviMacRemoteTable,,not-accessible,,current,,A table contains MAC addresses received from remote edge devices.
.1.3.6.1.4.1.11.2.14.11.15.2.132.1.3.3.1,HPN-ICF-EVI-MIB::hpnicfEviMacRemoteEntry,,not-accessible,ifIndex:hpnicfEviMacRemoteVlan:hpnicfEviMacRemoteMacAddr,current,,Detailed information about each remote MAC.
.1.3.6.1.4.1.11.2.14.11.15.2.132.1.3.3.1.1,HPN-ICF-EVI-MIB::hpnicfEviMacRemoteVlan,Integer32,not-accessible,,current,,VLANs that contain remote MAC addresses.
.1.3.6.1.4.1.11.2.14.11.15.2.132.1.3.3.1.2,HPN-ICF-EVI-MIB::hpnicfEviMacRemoteMacAddr,OCTET,not-accessible,,current,,Remote MAC address.
.1.3.6.1.4.1.11.2.14.11.15.2.132.1.3.3.1.3,HPN-ICF-EVI-MIB::hpnicfEviMacRemoteMacEffect,INTEGER,read-only,,current,true(1):false(2),Whether the MAC can be used for forwarding traffic.
.1.3.6.1.4.1.11.2.14.11.15.2.132.1.3.3.1.4,HPN-ICF-EVI-MIB::hpnicfEviMacRemoteConflict,INTEGER,read-only,,current,true(1):false(2),The remote MAC conflicts with a local MAC.
.1.3.6.1.4.1.11.2.14.11.15.2.132.1.4,HPN-ICF-EVI-MIB::hpnicfEviProcess,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.2.132.1.4.1,HPN-ICF-EVI-MIB::hpnicfEviProcessPolicyTable,,not-accessible,,current,,A table that contains routing policy information for each EVI IS-IS process.
.1.3.6.1.4.1.11.2.14.11.15.2.132.1.4.1.1,HPN-ICF-EVI-MIB::hpnicfEviProcessPolicyEntry,,not-accessible,hpnicfEviProcessId,current,,Detailed information about the routing policy for each EVI IS-IS process.
.1.3.6.1.4.1.11.2.14.11.15.2.132.1.4.1.1.1,HPN-ICF-EVI-MIB::hpnicfEviProcessId,Unsigned32,accessible-for-notify,,current,,EVI IS-IS process ID.
.1.3.6.1.4.1.11.2.14.11.15.2.132.1.4.1.1.2,HPN-ICF-EVI-MIB::hpnicfEviProcessPolicy,OCTET,read-write,,current,,Routing policy for the EVI IS-IS process.
.1.3.6.1.4.1.11.2.14.11.15.2.132.1.4.2,HPN-ICF-EVI-MIB::hpnicfEviProcessGrTable,,not-accessible,,current,,A table that contains graceful restart (GR) information.
.1.3.6.1.4.1.11.2.14.11.15.2.132.1.4.2.1,HPN-ICF-EVI-MIB::hpnicfEviProcessGrEntry,,not-accessible,hpnicfEviProcessId,current,,Detailed GR information for each EVI IS-IS process.
.1.3.6.1.4.1.11.2.14.11.15.2.132.1.4.2.1.1,HPN-ICF-EVI-MIB::hpnicfEviProcessGrEnable,INTEGER,read-write,,current,true(1):false(2),Whether the GR function is enabled.
.1.3.6.1.4.1.11.2.14.11.15.2.132.1.4.2.1.2,HPN-ICF-EVI-MIB::hpnicfEviProcessGrInterval,Unsigned32,read-write,,current,,EVI IS-IS GR interval in the range of 30 to 1800, in seconds.
.1.3.6.1.4.1.11.2.14.11.15.2.132.1.4.3,HPN-ICF-EVI-MIB::hpnicfEviProcessVSysTable,,not-accessible,,current,,A table that contains virtual system entries. Virtual systems are associated with EVI IS-IS processes.
.1.3.6.1.4.1.11.2.14.11.15.2.132.1.4.3.1,HPN-ICF-EVI-MIB::hpnicfEviProcessVSysEntry,,not-accessible,hpnicfEviProcessId:hpnicfEviVirtualSysId,current,,Detailed information about each vitual system.
.1.3.6.1.4.1.11.2.14.11.15.2.132.1.4.3.1.1,HPN-ICF-EVI-MIB::hpnicfEviVirtualSysId,OCTET,not-accessible,,current,,Virtual system ID in hexadecimal notation. The virtual system ID must be unique in the EVI network.
.1.3.6.1.4.1.11.2.14.11.15.2.132.1.4.3.1.2,HPN-ICF-EVI-MIB::hpnicfEviVirtualSysRowStatus,INTEGER,read-create,,current,active(1):notInService(2):notReady(3):createAndGo(4):createAndWait(5):destroy(6),Entry status.
.1.3.6.1.4.1.11.2.14.11.15.2.132.1.5,HPN-ICF-EVI-MIB::hpnicfEviISIS,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.2.132.1.5.1,HPN-ICF-EVI-MIB::hpnicfEviISISNbrSummaryTable,,not-accessible,,current,,EVI neighbor statistics table.
.1.3.6.1.4.1.11.2.14.11.15.2.132.1.5.1.1,HPN-ICF-EVI-MIB::hpnicfEviISISNbrSummaryEntry,,not-accessible,hpnicfEviProcessId,current,,EVI neighbor statistics table entries. The entries contain the EVI neighbor summary for each EVI IS-IS process.
.1.3.6.1.4.1.11.2.14.11.15.2.132.1.5.1.1.1,HPN-ICF-EVI-MIB::hpnicfEviISISNbrMaxMultiHomes,Unsigned32,read-only,,current,,The maximum number of edge devices that the site can contain.
.1.3.6.1.4.1.11.2.14.11.15.2.132.1.5.1.1.2,HPN-ICF-EVI-MIB::hpnicfEviISISNbrSiteNbrs,Unsigned32,read-only,,current,,The count of neighbors that belong to the same site.
.1.3.6.1.4.1.11.2.14.11.15.2.132.1.5.1.1.3,HPN-ICF-EVI-MIB::hpnicfEviISISNbrLinkNbrs,Unsigned32,read-only,,current,,The count of neighbors that are in remote sites.
.1.3.6.1.4.1.11.2.14.11.15.2.132.1.5.2,HPN-ICF-EVI-MIB::hpnicfEviISISNbrTable,,not-accessible,,current,,A table that contains generic information about all neighbors.
.1.3.6.1.4.1.11.2.14.11.15.2.132.1.5.2.1,HPN-ICF-EVI-MIB::hpnicfEviISISNbrEntry,,not-accessible,hpnicfEviProcessId:ifIndex:hpnicfEviISISNbrSysId,current,,Detailed information about each neighbor of the edge device.
.1.3.6.1.4.1.11.2.14.11.15.2.132.1.5.2.1.1,HPN-ICF-EVI-MIB::hpnicfEviISISNbrSysId,OCTET,accessible-for-notify,,current,,System ID of the neighbor.
.1.3.6.1.4.1.11.2.14.11.15.2.132.1.5.2.1.2,HPN-ICF-EVI-MIB::hpnicfEviISISNbrMacAddr,OCTET,read-only,,current,,MAC address of the neighbor.
.1.3.6.1.4.1.11.2.14.11.15.2.132.1.5.2.1.3,HPN-ICF-EVI-MIB::hpnicfEviISISNbrSiteId,Integer32,read-only,,current,,Site ID of the neighbor.
.1.3.6.1.4.1.11.2.14.11.15.2.132.1.5.2.1.4,HPN-ICF-EVI-MIB::hpnicfEviISISNbrTransStatus,INTEGER,read-only,,current,true(1):false(2),State of EVI transport-facing links.
.1.3.6.1.4.1.11.2.14.11.15.2.132.1.6,HPN-ICF-EVI-MIB::hpnicfEviEnable,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.2.132.1.6.1,HPN-ICF-EVI-MIB::hpnicfEviEnableTable,,not-accessible,,current,,A table that contains all EVI-enabled neighboring ports of the edge device.
.1.3.6.1.4.1.11.2.14.11.15.2.132.1.6.1.1,HPN-ICF-EVI-MIB::hpnicfEviEnableEntry,,not-accessible,ifIndex,current,,Detailed information about each EVI-enabled port in the EVI network.
.1.3.6.1.4.1.11.2.14.11.15.2.132.1.6.1.1.1,HPN-ICF-EVI-MIB::hpnicfEviEnableStatus,INTEGER,read-write,,current,true(1):false(2),End station service disable (trunk port) bit. When this bit is set (true), all native frames received on the port and all native frames that would have been sent on the port are discarded. The value of this object MUST be retained across reinitializations of the management system.
.1.3.6.1.4.1.11.2.14.11.15.2.132.1.7,HPN-ICF-EVI-MIB::hpnicfEviNbr,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.2.132.1.7.1,HPN-ICF-EVI-MIB::hpnicfEviNbrBaseTable,,not-accessible,,current,,A table that contains basic information about the EVI Neighbor Discovery Protocol (ENDP).
.1.3.6.1.4.1.11.2.14.11.15.2.132.1.7.1.1,HPN-ICF-EVI-MIB::hpnicfEviNbrBaseEntry,,not-accessible,ifIndex,current,,Detailed information about ENDP for each EVI tunnel.
.1.3.6.1.4.1.11.2.14.11.15.2.132.1.7.1.1.1,HPN-ICF-EVI-MIB::hpnicfEviNbrSelfServerStatus,INTEGER,read-write,,current,true(1):false(2),If the value is set to true, the EVI neighbor discovery server (ENDS) is enabled. When you enable ENDS on an EVI tunnel interface, an EVI neighbor discovery client (ENDC) on the EVI tunnel interface is also enabled automatically, with the source address of the EVI tunnel as the server address.
.1.3.6.1.4.1.11.2.14.11.15.2.132.1.7.1.1.2,HPN-ICF-EVI-MIB::hpnicfEviNbrAuthPassword,OCTET,read-write,,current,,ENDP authentication key. It is a zero-length string when being read.
.1.3.6.1.4.1.11.2.14.11.15.2.132.1.7.1.1.3,HPN-ICF-EVI-MIB::hpnicfEviNbrClientRegisterInterval,Integer32,read-write,,current,,Interval at which the ENDCs on an EVI tunnel interface update their registration with their ENDSs.
.1.3.6.1.4.1.11.2.14.11.15.2.132.1.7.2,HPN-ICF-EVI-MIB::hpnicfEviNbrRemoteServerTable,,not-accessible,,current,,A table that contains basic information about the remote ENDSs.
.1.3.6.1.4.1.11.2.14.11.15.2.132.1.7.2.1,HPN-ICF-EVI-MIB::hpnicfEviNbrRemoteServerEntry,,not-accessible,ifIndex:hpnicfEviNbrRemoteServerType:hpnicfEviNbrRemoteServer,current,,Detailed information about each remote ENDS. When you set the address of a remote ENDS on an EVI tunnel interface, an ENDC is enabled automatically on the EVI tunnel interface.
.1.3.6.1.4.1.11.2.14.11.15.2.132.1.7.2.1.1,HPN-ICF-EVI-MIB::hpnicfEviNbrRemoteServerType,INTEGER,not-accessible,,current,unknown(0):ipv4(1):ipv6(2):ipv4z(3):ipv6z(4):dns(16),Address type of the remote ENDS, including ipv4 and ipv6.
.1.3.6.1.4.1.11.2.14.11.15.2.132.1.7.2.1.2,HPN-ICF-EVI-MIB::hpnicfEviNbrRemoteServer,OCTET,not-accessible,,current,,Address of the remote ENDS. The address type is specified by the hpnicfEviNbrRemoteServerType object. Address length (4 or 16 bytes) must be consistent with the address type.
.1.3.6.1.4.1.11.2.14.11.15.2.132.1.7.2.1.3,HPN-ICF-EVI-MIB::hpnicfEviNbrRemoteServerRowStatus,INTEGER,read-create,,current,active(1):notInService(2):notReady(3):createAndGo(4):createAndWait(5):destroy(6),Entry status. This object is used to create or delete entries. Deleting entries does not delete this object.
.1.3.6.1.4.1.11.2.14.11.15.2.132.1.7.3,HPN-ICF-EVI-MIB::hpnicfEviNbrTable,,not-accessible,,current,,A table that contains basic information about neighbors discovered with ENDP.
.1.3.6.1.4.1.11.2.14.11.15.2.132.1.7.3.1,HPN-ICF-EVI-MIB::hpnicfEviNbrEntry,,not-accessible,ifIndex:hpnicfEviNbrAddressType:hpnicfEviNbrAddress,current,,Detailed information about each EVI neighbor.
.1.3.6.1.4.1.11.2.14.11.15.2.132.1.7.3.1.1,HPN-ICF-EVI-MIB::hpnicfEviNbrAddressType,INTEGER,not-accessible,,current,unknown(0):ipv4(1):ipv6(2):ipv4z(3):ipv6z(4):dns(16),Address type of the neighbor, including ipv4 and ipv6.
.1.3.6.1.4.1.11.2.14.11.15.2.132.1.7.3.1.2,HPN-ICF-EVI-MIB::hpnicfEviNbrAddress,OCTET,not-accessible,,current,,Address of the neighbor. The address type is specified by the hpnicfEviNbrAddressType object. Address length (4 or 16 bytes) must be consistent with the address type.
.1.3.6.1.4.1.11.2.14.11.15.2.132.1.7.3.1.3,HPN-ICF-EVI-MIB::hpnicfEviNbrSystemID,OCTET,read-only,,current,,System ID of the neighbor.
.1.3.6.1.4.1.11.2.14.11.15.2.132.1.7.3.1.4,HPN-ICF-EVI-MIB::hpnicfEviNbrExpireTime,Integer32,read-only,,current,,Expiration time of the neighbor.
.1.3.6.1.4.1.11.2.14.11.15.2.132.1.7.3.1.5,HPN-ICF-EVI-MIB::hpnicfEviNbrStatus,INTEGER,read-only,,current,up(1):down(2),State of the neighbor.
.1.3.6.1.4.1.11.2.14.11.15.2.133,HPN-ICF-OID-MIB::hpnicfIssuUpgrade,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.2.133.1,HPN-ICF-ISSU-MIB::hpnicfIssuUpgradeMibObjects,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.2.133.1.1,HPN-ICF-ISSU-MIB::hpnicfIssuUpgradeGroup,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.2.133.1.1.1,HPN-ICF-ISSU-MIB::hpnicfIssuUpgradeImageTable,,not-accessible,,current,,A table listing the image variable types that exist in the device.
.1.3.6.1.4.1.11.2.14.11.15.2.133.1.1.1.1,HPN-ICF-ISSU-MIB::hpnicfIssuUpgradeImageEntry,,not-accessible,hpnicfIssuUpgradeImageIndex,current,,An hpnicfIssuUpgradeImageEntry entry. Each entry provides an image variable type that exists in the device.
.1.3.6.1.4.1.11.2.14.11.15.2.133.1.1.1.1.1,HPN-ICF-ISSU-MIB::hpnicfIssuUpgradeImageIndex,Integer32,not-accessible,,current,,Index of each image.
.1.3.6.1.4.1.11.2.14.11.15.2.133.1.1.1.1.2,HPN-ICF-ISSU-MIB::hpnicfIssuUpgradeImageType,INTEGER,read-create,,current,boot(1):system(2):feature(3):ipe(4),Types of images that the system can run. The value of this object has four image variables names - 'boot', 'system', 'feature' and 'ipe'. This table will then list these four strings as follows: hpnicfIssuUpgradeImageType boot system feature IPE The user can assign images (using hpnicfIssuUpgradeImageURL) to these variables and the system will use the assigned images to boot.
.1.3.6.1.4.1.11.2.14.11.15.2.133.1.1.1.1.3,HPN-ICF-ISSU-MIB::hpnicfIssuUpgradeImageURL,OCTET,read-create,,current,,This object contains the path of the image of this entity.
.1.3.6.1.4.1.11.2.14.11.15.2.133.1.1.1.1.4,HPN-ICF-ISSU-MIB::hpnicfIssuUpgradeImageRowStatus,INTEGER,read-create,,current,active(1):notInService(2):notReady(3):createAndGo(4):createAndWait(5):destroy(6),Row-status of image table.
.1.3.6.1.4.1.11.2.14.11.15.2.133.1.1.2,HPN-ICF-ISSU-MIB::hpnicfIssuOp,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.2.133.1.1.2.1,HPN-ICF-ISSU-MIB::hpnicfIssuOpType,INTEGER,read-write,,current,none(1):done(2):test(3):install(4):rollback(5),Command to be executed. The 'test' command must be performed before the 'install' command can be executed. The 'install' command is allowed only if a read of this object returns 'test' and the value of object hpnicfIssuOpStatus is 'success'. Command Remarks none If the user sets this object to 'none', the agent will return a success without performing an upgrade operation. done If this object returns any value other than 'none', setting this to 'done' will do the required cleanup of the previous upgrade operation and get the system ready for a new upgrade operation. test Check the version compatibility and upgrade method for the given set of image files. install For all the image entities listed in the hpnicfIssuUpgradeImageTable, perform the required upgrade operation listed in that table. rollback Abort the current 'install' operation and roll back to the previous version. 
.1.3.6.1.4.1.11.2.14.11.15.2.133.1.1.2.2,HPN-ICF-ISSU-MIB::hpnicfIssuImageFileOverwrite,INTEGER,read-write,,current,true(1):false(2),If you want to overwrite the existing file, set the value of this object to enable. Otherwise, set the value of this object to disable.
.1.3.6.1.4.1.11.2.14.11.15.2.133.1.1.2.3,HPN-ICF-ISSU-MIB::hpnicfIssuOpTrapEnable,INTEGER,read-write,,current,true(1):false(2),If you want to enable the trap, set the value of this object to enable. Otherwise, set the value of this object to disable.
.1.3.6.1.4.1.11.2.14.11.15.2.133.1.1.2.4,HPN-ICF-ISSU-MIB::hpnicfIssuOpStatus,INTEGER,read-only,,current,none(1):failure(2):inProgress(3):success(4):rollbackInProgress(5):rollbackSuccess(6),Status of the specified operation. none - No operation was performed. failure - Specified operation has failed. inProgress - Specified operation is in progress. success - Specified operation completed successfully. rollbackInProgress - Rollback operation is in progress. rollbackSuccess - Rollback operation completed successfully. 
.1.3.6.1.4.1.11.2.14.11.15.2.133.1.1.2.5,HPN-ICF-ISSU-MIB::hpnicfIssuFailedReason,OCTET,read-only,,current,,Indicates the the cause of 'failure' state of the object 'hpnicfIssuOpStatus'. This object would be a null string if the value of 'hpnicfIssuOpStatus' is not 'failure'.
.1.3.6.1.4.1.11.2.14.11.15.2.133.1.1.2.6,HPN-ICF-ISSU-MIB::hpnicfIssuOpTimeCompleted,OCTET,read-only,,current,,Indicates the time when the upgrade operation was completed. This object would be a null string if hpnicfIssuOpType is 'none'. 
.1.3.6.1.4.1.11.2.14.11.15.2.133.1.1.2.7,HPN-ICF-ISSU-MIB::hpnicfIssuLastOpType,INTEGER,read-only,,current,none(1):done(2):test(3):install(4):rollback(5),This object indicates the previous hpnicfIssuOp value. It will be updated after a new hpnicfIssuOp is set and delivered to the upgrade process. Command Remarks none If the user sets this object to 'none', agent will return a success without performing an upgrade operation. done If this object returns any value other than 'none', setting this to 'done' will do the required cleanup of the previous upgrade operation and get the system ready for a new upgrade operation. test Check the version compatibility and upgrade method for the given set of image files. install For all the image entities listed in the hpnicfIssuUpgradeImageTable, perform the required upgrade operation listed in that table. rollback Abort the current install operation and roll back to the previous version. 
.1.3.6.1.4.1.11.2.14.11.15.2.133.1.1.2.8,HPN-ICF-ISSU-MIB::hpnicfIssuLastOpStatus,INTEGER,read-only,,current,none(1):failure(2):inProgress(3):success(4):rollbackInProgress(5):rollbackSuccess(6),This object indicates previous hpnicfIssuOpStatus value. It will be updated after new hpnicfIssuOp is set and delivered to upgrade process. none - No operation was performed. failure - Specified operation has failed. inProgress - Specified operation is active. success - Specified operation completed successfully. rollbackInProgress - Rollback operation is in progress. rollbackSuccess - Rollback operation completed successfully. 
.1.3.6.1.4.1.11.2.14.11.15.2.133.1.1.2.9,HPN-ICF-ISSU-MIB::hpnicfIssuLastOpFailedReason,OCTET,read-only,,current,,Indicates the cause of 'failure' state of the object 'hpnicfIssuOpStatus'. This object would be a null string if the value of 'hpnicfIssuOpStatus' is not 'failure'. The value will be updated when new hpnicfIssuOp is set and delivered to the upgrade process.
.1.3.6.1.4.1.11.2.14.11.15.2.133.1.1.2.10,HPN-ICF-ISSU-MIB::hpnicfIssuLastOpTimeCompleted,OCTET,read-only,,current,,Indicates the previous hpnicfIssuOpTimeCompleted value. The value will be updated when new hpnicfIssuOp is set and delivered to the upgrade process.
.1.3.6.1.4.1.11.2.14.11.15.2.133.1.2,HPN-ICF-ISSU-MIB::hpnicfIssuUpgradeResultGroup,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.2.133.1.2.1,HPN-ICF-ISSU-MIB::hpnicfIssuCompatibleResult,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.2.133.1.2.1.1,HPN-ICF-ISSU-MIB::hpnicfIssuCompatibleResultStatus,INTEGER,read-only,,current,none(1):inCompatible(2):compatible(3):failure(4),Specifies whether the images provided in hpnicfIssuUpgradeImageTable are compatible with each other as far as this module is concerned. none - No operation was performed. inCompatible - The images provided are compatible and can be run on this module. compatible - The images provided are incompatible and can be run on this module. failure - Failed to get the compatibility. 
.1.3.6.1.4.1.11.2.14.11.15.2.133.1.2.1.2,HPN-ICF-ISSU-MIB::hpnicfIssuCompatibleResultFailedReason,OCTET,read-only,,current,,Indicates the cause of 'failure' state of the object 'hpnicfIssuCompatibleResultStatus'. This object would be a null string if the value of 'hpnicfIssuCompatibleResultStatus' is not 'failure'.
.1.3.6.1.4.1.11.2.14.11.15.2.133.1.2.2,HPN-ICF-ISSU-MIB::hpnicfIssuTestResultTable,,not-accessible,,current,,Shows the result of the test operation, from which you can see the upgrade method.
.1.3.6.1.4.1.11.2.14.11.15.2.133.1.2.2.1,HPN-ICF-ISSU-MIB::hpnicfIssuTestResultEntry,,not-accessible,hpnicfIssuTestResultIndex,current,,An hpnicfIssuTestResultEntry entry. Each entry provides the test result of a card in the device.
.1.3.6.1.4.1.11.2.14.11.15.2.133.1.2.2.1.1,HPN-ICF-ISSU-MIB::hpnicfIssuTestResultIndex,Integer32,not-accessible,,current,,Internal index, not accessible.
.1.3.6.1.4.1.11.2.14.11.15.2.133.1.2.2.1.2,HPN-ICF-ISSU-MIB::hpnicfIssuTestDeviceChassisID,Integer32,read-only,,current,,Chassis ID of the card.
.1.3.6.1.4.1.11.2.14.11.15.2.133.1.2.2.1.3,HPN-ICF-ISSU-MIB::hpnicfIssuTestDeviceSlotID,Integer32,read-only,,current,,Slot ID of the card.
.1.3.6.1.4.1.11.2.14.11.15.2.133.1.2.2.1.4,HPN-ICF-ISSU-MIB::hpnicfIssuTestDeviceCpuID,Integer32,read-only,,current,,CPU ID of the card.
.1.3.6.1.4.1.11.2.14.11.15.2.133.1.2.2.1.5,HPN-ICF-ISSU-MIB::hpnicfIssuTestDeviceUpgradeWay,INTEGER,read-only,,current,none(1):reboot(2):sequenceReboot(3):issuReboot(4):serviceUpgrade(5):fileUpgrade(6):incompatibleUpgrade(7),Upgrade method of the device. none - No operation was performed. reboot - The upgrade method of this device is Reboot. sequenceReboot - The upgrade method of this device is SequenceReboot. issuReboot - The upgrade method of this device is IssuReboot. serviceUpgrade - The upgrade method of this device is ServiceReboot. fileUpgrade - The upgrade method of this device is FileReboot. incompatibleUpgrade - The upgrade method of this device is IncompatibleUpgrade. 
.1.3.6.1.4.1.11.2.14.11.15.2.133.1.2.3,HPN-ICF-ISSU-MIB::hpnicfIssuUpgradeResultTable,,not-accessible,,current,,Shows the result of the install operation.
.1.3.6.1.4.1.11.2.14.11.15.2.133.1.2.3.1,HPN-ICF-ISSU-MIB::hpnicfIssuUpgradeResultEntry,,not-accessible,hpnicfIssuUpgradeResultIndex,current,,An hpnicfIssuUpgradeResultEntry entry. Each entry provides the upgrade result of a card in the device.
.1.3.6.1.4.1.11.2.14.11.15.2.133.1.2.3.1.1,HPN-ICF-ISSU-MIB::hpnicfIssuUpgradeResultIndex,Integer32,not-accessible,,current,,Internal Index, not accessible.
.1.3.6.1.4.1.11.2.14.11.15.2.133.1.2.3.1.2,HPN-ICF-ISSU-MIB::hpnicfIssuUpgradeDeviceChassisID,Integer32,read-only,,current,,Chassis ID of the card.
.1.3.6.1.4.1.11.2.14.11.15.2.133.1.2.3.1.3,HPN-ICF-ISSU-MIB::hpnicfIssuUpgradeDeviceSlotID,Integer32,read-only,,current,,Slot ID of the card.
.1.3.6.1.4.1.11.2.14.11.15.2.133.1.2.3.1.4,HPN-ICF-ISSU-MIB::hpnicfIssuUpgradeDeviceCpuID,Integer32,read-only,,current,,CPU ID of the card.
.1.3.6.1.4.1.11.2.14.11.15.2.133.1.2.3.1.5,HPN-ICF-ISSU-MIB::hpnicfIssuUpgradeState,INTEGER,read-only,,current,init(1):loading(2):loaded(3):switching(4):switchover(5):committing(6):committed(7):rollbacking(8):rollbacked(9),Upgrade status of the device. init -The current status of the device is Init. loading -The current status of the device is Loading. loaded -The current status of the device is Loaded. switching -The current status of the device is Switching. switchover -The current status of the device is Switchover. committing -The current status of the device is Committing. committed -The current status of the device is Committed. rollbacking -The current status of the device is Rollbacking. rollbacked -The current status of the device is Rollbacked. 
.1.3.6.1.4.1.11.2.14.11.15.2.133.1.2.3.1.6,HPN-ICF-ISSU-MIB::hpnicfIssuDeviceUpgradeWay,INTEGER,read-only,,current,none(1):reboot(2):sequenceReboot(3):issuReboot(4):serviceUpgrade(5):fileUpgrade(6):incompatibleUpgrade(7),Upgrade method of the card. none - No operation was performed. reboot - The upgrade method of this device is Reboot. sequenceReboot - The upgrade method of this device is SequenceReboot. issuReboot - The upgrade method of this device is IssuReboot. serviceUpgrade - The upgrade method of this device is ServiceReboot. fileUpgrade - The upgrade method of this device is FileReboot. incompatibleUpgrade - The upgrade method of this device is IncompatibleUpgrade. 
.1.3.6.1.4.1.11.2.14.11.15.2.133.1.2.3.1.7,HPN-ICF-ISSU-MIB::hpnicfIssuUpgradeDeviceStatus,INTEGER,read-only,,current,waitingUpgrade(1):inProcess(2):success(3):failure(4),Upgrade status of the device.
.1.3.6.1.4.1.11.2.14.11.15.2.133.1.2.3.1.8,HPN-ICF-ISSU-MIB::hpnicfIssuUpgradeFailedReason,OCTET,read-only,,current,,Indicates the cause of 'failure' state of the object 'hpnicfIssuUpgradeDeviceStatus'. This object would be a null string if the value of 'hpnicfIssuCompatibleResultStatus' is not 'failure'.
.1.3.6.1.4.1.11.2.14.11.15.2.133.2,HPN-ICF-ISSU-MIB::hpnicfIssuUpgradeNotify,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.2.133.2.0,HPN-ICF-ISSU-MIB::hpnicfIssuUpgradeTrapPrefix,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.2.133.2.0.1,HPN-ICF-ISSU-MIB::hpnicfIssuUpgradeOpCompletionNotify,,,,,,An hpnicfIssuUpgradeOpCompletionNotify is sent at the completion of upgrade operation denoted by hpnicfIssuOp object, if such a notification was requested when the operation was initiated. hpnicfIssuOpType indicates the type of the operation. hpnicfIssuOpStatus indicates the result of the operation. hpnicfIssuFailedReason indicates the operation failure reason. hpnicfIssuOpTimeCompleted indicates the time when the operation was completed.
.1.3.6.1.4.1.11.2.14.11.15.2.134,HPN-ICF-OID-MIB::hpnicfEvb,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.2.134.1,HPN-ICF-EVB-MIB::hpnicfEvbSysObjects,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.2.134.1.1,HPN-ICF-EVB-MIB::hpnicfEvbSetResult,INTEGER,read-only,,current,unknown(1):processing(2):success(3):failed(4),If a set operation on EVB-MIB-tables returns success, this object indicates the actual result of this operation. Otherwise, it is meaningless. unknown: The set operation on the node has been completed, but the result could only be got from the table which the set operation happended. processing: The set operation is in process. Another set operation cannot be performed at this time. success: The set operation has succeeded. failed: The set operation has failed.
.1.3.6.1.4.1.11.2.14.11.15.2.134.1.2,HPN-ICF-EVB-MIB::hpnicfEvbDefaultManagerTable,,not-accessible,,current,,A table that contains configuration information for the default Virtual Station Interface (VSI) manager.
.1.3.6.1.4.1.11.2.14.11.15.2.134.1.2.1,HPN-ICF-EVB-MIB::hpnicfEvbDefaultManagerEntry,,not-accessible,hpnicfEvbManagerIndex,current,,A list of objects containing information for the default VSI manager.
.1.3.6.1.4.1.11.2.14.11.15.2.134.1.2.1.1,HPN-ICF-EVB-MIB::hpnicfEvbManagerIndex,Unsigned32,not-accessible,,current,,Index of the default manager table.
.1.3.6.1.4.1.11.2.14.11.15.2.134.1.2.1.2,HPN-ICF-EVB-MIB::hpnicfEvbManagerType,INTEGER,read-create,,current,ipv4(1):ipv6(2):name(3):local(4),Type of the default VSI manager. ipv4: Specifies the IPv4 address of the default VSI manager. ipv6: Specifies the IPv6 address of the default VSI manager. name: Specifies the name of the default VSI manager, a case-insensitive string of 1 to 127 characters. local: Specifies the device as the default VSI manager.
.1.3.6.1.4.1.11.2.14.11.15.2.134.1.2.1.3,HPN-ICF-EVB-MIB::hpnicfEvbManagerID,OCTET,read-create,,current,,Default VSI manager. The value is zero-length string when the VSI manager type is 'local'.
.1.3.6.1.4.1.11.2.14.11.15.2.134.1.2.1.4,HPN-ICF-EVB-MIB::hpnicfEvbManagerPort,Unsigned32,read-create,,current,,Port number of the default VSI manager. Optional when the VSI manager type is not 'local'. If the VSI manager type is 'local', it returns zero.
.1.3.6.1.4.1.11.2.14.11.15.2.134.1.2.1.5,HPN-ICF-EVB-MIB::hpnicfEvbManagerRowStatus,INTEGER,read-create,,current,active(1):notInService(2):notReady(3):createAndGo(4):createAndWait(5):destroy(6),Row status: CreateAndGo, Active, or Destroy.
.1.3.6.1.4.1.11.2.14.11.15.2.134.2,HPN-ICF-EVB-MIB::hpnicfEvbPortObjects,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.2.134.2.1,HPN-ICF-EVB-MIB::hpnicfEvbPortConfigTable,,not-accessible,,current,,A table that contains configuration information for the EVB bridge port.
.1.3.6.1.4.1.11.2.14.11.15.2.134.2.1.1,HPN-ICF-EVB-MIB::hpnicfEvbPortConfigEntry,,not-accessible,hpnicfEvbPortNumber,current,,A list of objects containing information for the EVB bridge port.
.1.3.6.1.4.1.11.2.14.11.15.2.134.2.1.1.1,HPN-ICF-EVB-MIB::hpnicfEvbPortNumber,Unsigned32,not-accessible,,current,,Port number.
.1.3.6.1.4.1.11.2.14.11.15.2.134.2.1.1.2,HPN-ICF-EVB-MIB::hpnicfEvbRWD,Unsigned32,read-write,,current,,VDP resource wait delay exponent.
.1.3.6.1.4.1.11.2.14.11.15.2.134.2.1.1.3,HPN-ICF-EVB-MIB::hpnicfEvbRKA,Unsigned32,read-write,,current,,VDP keepalive exponent.
.1.3.6.1.4.1.11.2.14.11.15.2.134.2.2,HPN-ICF-EVB-MIB::hpnicfEvbSchannelConfigTable,,not-accessible,,current,,A table that contains configuration information for the S-channel.
.1.3.6.1.4.1.11.2.14.11.15.2.134.2.2.1,HPN-ICF-EVB-MIB::hpnicfEvbSchannelConfigEntry,,not-accessible,hpnicfEvbPortNumber:hpnicfEvbSchannelID,current,,A list of objects containing information for the S-channel.
.1.3.6.1.4.1.11.2.14.11.15.2.134.2.2.1.1,HPN-ICF-EVB-MIB::hpnicfEvbSchannelID,Unsigned32,not-accessible,,current,,S-channel ID.
.1.3.6.1.4.1.11.2.14.11.15.2.134.2.2.1.2,HPN-ICF-EVB-MIB::hpnicfEvbSchannelSVLAN,Unsigned32,read-create,,current,,S-VLAN ID. 0 means that the S-channel is not bound to any S-VLAN. 1 represents the SVID for the default S-channel S-channel 1.
.1.3.6.1.4.1.11.2.14.11.15.2.134.2.2.1.3,HPN-ICF-EVB-MIB::hpnicfEvbMacLearningStatus,INTEGER,read-write,,current,true(1):false(2),The MAC address learning function is enabled or not.
.1.3.6.1.4.1.11.2.14.11.15.2.134.2.2.1.4,HPN-ICF-EVB-MIB::hpnicfEvbRRStatus,INTEGER,read-write,,current,true(1):false(2),The RR mode for the S-channel is enabled or not.
.1.3.6.1.4.1.11.2.14.11.15.2.134.2.2.1.5,HPN-ICF-EVB-MIB::hpnicfEvbSchannelRowStatus,INTEGER,read-create,,current,active(1):notInService(2):notReady(3):createAndGo(4):createAndWait(5):destroy(6),Row status: CreateAndGo, Active, or Destroy.
.1.3.6.1.4.1.11.2.14.11.15.2.134.2.3,HPN-ICF-EVB-MIB::hpnicfEvbVSIConfigTable,,not-accessible,,current,,A table that contains configuration information for the VSI.
.1.3.6.1.4.1.11.2.14.11.15.2.134.2.3.1,HPN-ICF-EVB-MIB::hpnicfEvbVSIConfigEntry,,not-accessible,hpnicfEvbSBPPortNumber:hpnicfEvbVSILocalID,current,,A list of objects containing information for the VSI.
.1.3.6.1.4.1.11.2.14.11.15.2.134.2.3.1.1,HPN-ICF-EVB-MIB::hpnicfEvbSBPPortNumber,Unsigned32,not-accessible,,current,,The Station-facing Bridge Port (SBP) port number.
.1.3.6.1.4.1.11.2.14.11.15.2.134.2.3.1.2,HPN-ICF-EVB-MIB::hpnicfEvbVSILocalID,Unsigned32,not-accessible,,current,,VSI local ID.
.1.3.6.1.4.1.11.2.14.11.15.2.134.2.3.1.3,HPN-ICF-EVB-MIB::hpnicfEvbVSICommand,INTEGER,read-create,,current,preAssociate(1):preAssociateWithRsrcReservation(2):associate(3):deAssociate(4),This object indicates the association or pre-associate property of the VSI.
.1.3.6.1.4.1.11.2.14.11.15.2.134.2.3.1.4,HPN-ICF-EVB-MIB::hpnicfEvbVSIIfIndex,Integer32,read-only,,current,,VSI interface index.
.1.3.6.1.4.1.11.2.14.11.15.2.134.2.3.1.5,HPN-ICF-EVB-MIB::hpnicfEvbVSIIsActive,INTEGER,read-write,,current,true(1):false(2),The VSI is activated or not. Activate a VSI after configuring a VSI filter, and deactivate a VSI before removing a VSI filter.
.1.3.6.1.4.1.11.2.14.11.15.2.134.2.3.1.6,HPN-ICF-EVB-MIB::hpnicfEvbVSIRowStatus,INTEGER,read-create,,current,active(1):notInService(2):notReady(3):createAndGo(4):createAndWait(5):destroy(6),Row status: CreateAndGo, Active, or Destroy.
.1.3.6.1.4.1.11.2.14.11.15.2.134.2.4,HPN-ICF-EVB-MIB::hpnicfEvbVSIFilterConfigTable,,not-accessible,,current,,A table that contains configuration information for filters of the VSI.
.1.3.6.1.4.1.11.2.14.11.15.2.134.2.4.1,HPN-ICF-EVB-MIB::hpnicfEvbVSIFilterConfigEntry,,not-accessible,hpnicfEvbSBPPortNumber:hpnicfEvbVSILocalID:hpnicfEvbGroupID:hpnicfEvbVSIMac:hpnicfEvbVSIVlanId,current,,A list of objects containing information for filters of the VSI.
.1.3.6.1.4.1.11.2.14.11.15.2.134.2.4.1.1,HPN-ICF-EVB-MIB::hpnicfEvbGroupID,Unsigned32,not-accessible,,current,,Group ID.
.1.3.6.1.4.1.11.2.14.11.15.2.134.2.4.1.2,HPN-ICF-EVB-MIB::hpnicfEvbVSIMac,OCTET,not-accessible,,current,,The MAC address part of the MAC/VLANs for a VSI.
.1.3.6.1.4.1.11.2.14.11.15.2.134.2.4.1.3,HPN-ICF-EVB-MIB::hpnicfEvbVSIVlanId,Unsigned32,not-accessible,,current,,The VLAN ID part of the MAC/VLANs for a VSI.
.1.3.6.1.4.1.11.2.14.11.15.2.134.2.4.1.4,HPN-ICF-EVB-MIB::hpnicfEvbVSIFilterRowStatus,INTEGER,read-create,,current,active(1):notInService(2):notReady(3):createAndGo(4):createAndWait(5):destroy(6),Row status: CreateAndGo, Active, or Destroy.
.1.3.6.1.4.1.11.2.14.11.15.2.134.3,HPN-ICF-EVB-MIB::hpnicfFlex10Objects,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.2.134.3.1,HPN-ICF-EVB-MIB::hpnicfFlex10PortConfigTable,,not-accessible,,current,,A table that contains configuration information for the flex10 bridge port.
.1.3.6.1.4.1.11.2.14.11.15.2.134.3.1.1,HPN-ICF-EVB-MIB::hpnicfFlex10PortConfigEntry,,not-accessible,hpnicfFlex10PortNumber,current,,A list of objects containing information for the flex10 bridge port.
.1.3.6.1.4.1.11.2.14.11.15.2.134.3.1.1.1,HPN-ICF-EVB-MIB::hpnicfFlex10PortNumber,Unsigned32,not-accessible,,current,,Port number.
.1.3.6.1.4.1.11.2.14.11.15.2.134.3.1.1.2,HPN-ICF-EVB-MIB::hpnicfFlex10PortEnableStatus,INTEGER,read-write,,current,true(1):false(2),The flex10 function is enabled or not.
.1.3.6.1.4.1.11.2.14.11.15.2.134.3.2,HPN-ICF-EVB-MIB::hpnicfFlex10RemoteSchannelTable,,not-accessible,,current,,A table that contains remote S-channel details.
.1.3.6.1.4.1.11.2.14.11.15.2.134.3.2.1,HPN-ICF-EVB-MIB::hpnicfFlex10RemoteSchannelEntry,,not-accessible,hpnicfFlex10PortNumber:hpnicfEvbSchannelID,current,,A list of objects describing remote S-channels.
.1.3.6.1.4.1.11.2.14.11.15.2.134.3.2.1.1,HPN-ICF-EVB-MIB::hpnicfFlex10RemSchDesFormat,BITS,read-only,,current,format0(0):format1(1),Description format of the remote S-channel.
.1.3.6.1.4.1.11.2.14.11.15.2.134.3.2.1.2,HPN-ICF-EVB-MIB::hpnicfFlex10RemSchTerminationType,Integer32,read-only,,current,,Termination type of the remote S-channel. 0: PCI Physical Function (Primary). 1: SRIOV Virtual Function. 2: PCI Physical Function (Secondary). 3: Virtual Switch Port. 4: NCSI Port. 2147483647: This value means a Description TLV with format 0 has not been received. other: Unknown termination type.
.1.3.6.1.4.1.11.2.14.11.15.2.134.3.2.1.3,HPN-ICF-EVB-MIB::hpnicfFlex10RemSchTerminationCap,BITS,read-only,,current,ethernet(0):fCOE(1):iSCSI(2):roCEE(3),Termination capabilities of the remote S-channel. If a Description TLV with format 0 has not been received, it returns all zeros.
.1.3.6.1.4.1.11.2.14.11.15.2.134.3.2.1.4,HPN-ICF-EVB-MIB::hpnicfFlex10RemSchTrafficClass,BITS,read-only,,current,class0(0):class1(1):class2(2):class3(3):class4(4):class5(5):class6(6):class7(7),Traffic classes of the remote S-channel. If a Description TLV with format 0 has not been received, it returns all zeros.
.1.3.6.1.4.1.11.2.14.11.15.2.134.3.2.1.5,HPN-ICF-EVB-MIB::hpnicfFlex10RemSchCir,Integer32,read-only,,current,,Committed Information Rate (CIR) of the remote S-channel. If a Description TLV with format 0 has not been received, it returns 0.
.1.3.6.1.4.1.11.2.14.11.15.2.134.3.2.1.6,HPN-ICF-EVB-MIB::hpnicfFlex10RemSchPir,Integer32,read-only,,current,,Peak Information Rate (PIR) of the remote S-channel. If a Description TLV with format 0 has not been received, it returns 0.
.1.3.6.1.4.1.11.2.14.11.15.2.134.3.2.1.7,HPN-ICF-EVB-MIB::hpnicfFlex10RemSchConnectionID,OCTET,read-only,,current,,Connection instance ID of the remote S-channel. The value is a zero-length string if a Description TLV with format 1 has not been received. Otherwise it returns a string with length 16.
.1.3.6.1.4.1.11.2.14.11.15.2.134.3.3,HPN-ICF-EVB-MIB::hpnicfFlex10SchannelLinkCtlTable,,not-accessible,,current,,A table that contains link status information for the S-channel.
.1.3.6.1.4.1.11.2.14.11.15.2.134.3.3.1,HPN-ICF-EVB-MIB::hpnicfFlex10SchannelLinkCtlEntry,,not-accessible,hpnicfFlex10PortNumber:hpnicfEvbSchannelID,current,,A list of objects containing information for the S-channel.
.1.3.6.1.4.1.11.2.14.11.15.2.134.3.3.1.1,HPN-ICF-EVB-MIB::hpnicfFlex10SchannelSVID,Unsigned32,read-only,,current,,S-VLAN ID for the S-channel.
.1.3.6.1.4.1.11.2.14.11.15.2.134.3.3.1.2,HPN-ICF-EVB-MIB::hpnicfFlex10SchannelLocalStatus,INTEGER,read-only,,current,unknown(1):disabled(2):enabled(3),Link status of the local S-channel.
.1.3.6.1.4.1.11.2.14.11.15.2.134.3.3.1.3,HPN-ICF-EVB-MIB::hpnicfFlex10SchannelRemoteStatus,INTEGER,read-only,,current,unknown(1):disabled(2):enabled(3),Link status of the remote S-channel.
.1.3.6.1.4.1.11.2.14.11.15.2.135,HPN-ICF-OID-MIB::hpnicfFcoeMode,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.2.135.1,HPN-ICF-FCOE-MODE-MIB::hpnicfFcoeModeMibObjects,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.2.135.1.1,HPN-ICF-FCOE-MODE-MIB::hpnicfFcoeModeCfgMode,Integer32,read-write,,current,,This object specifies the FCoE modes the switch supports. The object has four available values: 1: non-FCoE mode. 2: FCF mode. 3: NPV mode. 4: Transit mode. The switch mode can only be converted from non-FCoE mode to one of FCoE modes, or vice versa, but cannot be converted directly among the other three FCoE modes. To convert among the other three FCoE modes, the switch should first be converted to non-FCoE mode. After converting the switch to non-FCoE mode, FCoE-related configurations in the original FCoE mode will be cleared.
.1.3.6.1.4.1.11.2.14.11.15.2.135.1.2,HPN-ICF-FCOE-MODE-MIB::hpnicfFcoeModeCfgLastResult,INTEGER,read-only,,current,success(1):noLicence(2):needReset(3):unknownFault(4),This object specifies the result of the latest FCoE mode configuration. The object has four values: success - Configured successfully. noLicence - Configured unsuccessfully for lack of licence. needReset - Configured unsuccessfully, because the desired mode is not non-FCoE mode, and the mode should be first set to non-FCoE mode. unknownFault - Configured unsuccessfully for unknown fault.
.1.3.6.1.4.1.11.2.14.11.15.2.136,HPN-ICF-OID-MIB::hpnicfMDC,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.2.136.1,HPN-ICF-MDC-MIB::hpnicfMDCScalarObjects,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.2.136.1.1,HPN-ICF-MDC-MIB::hpnicfMDCMaxMDCNum,Integer32,read-only,,current,,The maximum number of MDCs which the system supported to create.
.1.3.6.1.4.1.11.2.14.11.15.2.136.1.2,HPN-ICF-MDC-MIB::hpnicfMDCCurrentMDCNum,Integer32,read-only,,current,,The current number of MDCs which the system has created.
.1.3.6.1.4.1.11.2.14.11.15.2.136.2,HPN-ICF-MDC-MIB::hpnicfMDCTables,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.2.136.2.1,HPN-ICF-MDC-MIB::hpnicfMDCControl,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.2.136.2.1.1,HPN-ICF-MDC-MIB::hpnicfMDCControlTable,,not-accessible,,current,,This table is used to configure MDCs for a device and show MDC's status.
.1.3.6.1.4.1.11.2.14.11.15.2.136.2.1.1.1,HPN-ICF-MDC-MIB::hpnicfMDCControlEntry,,not-accessible,hpnicfMDCIndex,current,,An entry of the hpnicfMDCControlTable, every entry is corresponding with an MDC.
.1.3.6.1.4.1.11.2.14.11.15.2.136.2.1.1.1.1,HPN-ICF-MDC-MIB::hpnicfMDCIndex,Integer32,accessible-for-notify,,current,,MDC ID is used as MDCIndex, the value range of MDC ID depends on the device model. MDCIndex cannot be modified after creation.
.1.3.6.1.4.1.11.2.14.11.15.2.136.2.1.1.1.2,HPN-ICF-MDC-MIB::hpnicfMDCName,OCTET,read-create,,current,,Specifies the MDC name, a case-sensitive string of 1 to 15 characters. The MDC name cannot be modified after creation.
.1.3.6.1.4.1.11.2.14.11.15.2.136.2.1.1.1.3,HPN-ICF-MDC-MIB::hpnicfMDCAction,INTEGER,read-write,,current,start(1):stop(2),State of MDC action: start/stop. After an MDC is started, administrators of the MDC can log in to the MDC for MDC configuration and maintenance. Stopping an MDC interrupts all services on the MDC and logs out all users of the MDC. Non-default MDC cannot operate.
.1.3.6.1.4.1.11.2.14.11.15.2.136.2.1.1.1.4,HPN-ICF-MDC-MIB::hpnicfMDCStatus,INTEGER,read-only,,current,inactive(1):starting(2):active(3):stopping(4):updating(5),Status of MDCs.
.1.3.6.1.4.1.11.2.14.11.15.2.136.2.1.1.1.5,HPN-ICF-MDC-MIB::hpnicfMDCRowStatus,INTEGER,read-create,,current,active(1):notInService(2):notReady(3):createAndGo(4):createAndWait(5):destroy(6),The status of this table entry. Only support active, createAndGo and destroy.
.1.3.6.1.4.1.11.2.14.11.15.2.136.2.2,HPN-ICF-MDC-MIB::hpnicfMDCResource,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.2.136.2.2.1,HPN-ICF-MDC-MIB::hpnicfMDCDISKResourceTable,,not-accessible,,current,,This table is for disk resource management: Specify a disk space percentage for an MDC and display the disk space usage. Default: All MDCs share the disk space in the system, and an MDC can use all free disk space in the system. Non-default MDC can only query the disk space usage.
.1.3.6.1.4.1.11.2.14.11.15.2.136.2.2.1.1,HPN-ICF-MDC-MIB::hpnicfMDCDISKResourceEntry,,not-accessible,entPhysicalIndex:hpnicfMDCIndex:hpnicfMDCDISKResourceInstance,current,,An entry of the hpnicfMDCDISKResourceTable, every entry is corresponding to disk resource of an MDC. Note that only entPhysicalIndex values that represent physical boards (i.e., associated entPhysicalClass value is 'module(9)') are permitted to exist in this table.
.1.3.6.1.4.1.11.2.14.11.15.2.136.2.2.1.1.1,HPN-ICF-MDC-MIB::hpnicfMDCDISKResourceInstance,Integer32,not-accessible,,current,,Instance index of disk resource. Different instances for disk: Flash, CF cards.
.1.3.6.1.4.1.11.2.14.11.15.2.136.2.2.1.1.2,HPN-ICF-MDC-MIB::hpnicfMDCDISKResourceInstanceName,OCTET,read-only,,current,,Instance name of disk resource. Such as: Flash, CF cards.
.1.3.6.1.4.1.11.2.14.11.15.2.136.2.2.1.1.3,HPN-ICF-MDC-MIB::hpnicfMDCDISKResourceMinLimit,Integer32,read-write,,current,,Limit minimum (reserve resources, must be all 0).
.1.3.6.1.4.1.11.2.14.11.15.2.136.2.2.1.1.4,HPN-ICF-MDC-MIB::hpnicfMDCDISKResourceMaxLimit,Integer32,read-write,,current,,Maximum of available resources of disk. Make sure the disk space amount assigned to an MDC is greater than the disk space amount the MDC is using. Non-default MDC cannot set
.1.3.6.1.4.1.11.2.14.11.15.2.136.2.2.1.1.5,HPN-ICF-MDC-MIB::hpnicfMDCDISKResourceReserve,Unsigned32,read-only,,current,,The reserve limit resources of disk.
.1.3.6.1.4.1.11.2.14.11.15.2.136.2.2.1.1.6,HPN-ICF-MDC-MIB::hpnicfMDCDISKResourceQuota,Unsigned32,read-only,,current,,The total limit resources of disk according to hpnicfMDCDiskResourceMaxLimit.
.1.3.6.1.4.1.11.2.14.11.15.2.136.2.2.1.1.7,HPN-ICF-MDC-MIB::hpnicfMDCDISKResourceUsage,Unsigned32,read-only,,current,,Current usage of disk resources.
.1.3.6.1.4.1.11.2.14.11.15.2.136.2.2.1.1.8,HPN-ICF-MDC-MIB::hpnicfMDCDISKResourceAvailable,Unsigned32,read-only,,current,,Current available resources of disk.
.1.3.6.1.4.1.11.2.14.11.15.2.136.2.2.2,HPN-ICF-MDC-MIB::hpnicfMDCMemoryResourceTable,,not-accessible,,current,,This table is for memory resource management: Specify a memory space percentage for an MDC and display the memory space usage. Default: All MDCs share the memory space in the system, and an MDC can use all free memory. Non-default MDC can only query resource message of memory.
.1.3.6.1.4.1.11.2.14.11.15.2.136.2.2.2.1,HPN-ICF-MDC-MIB::hpnicfMDCMemoryResourceEntry,,not-accessible,entPhysicalIndex:hpnicfMDCIndex,current,,An entry of the hpnicfMDCMemoryResourceTable, every entry is corresponding with memory resource of an MDC. Note that only entPhysicalIndex values that represent physical boards (i.e., associated entPhysicalClass value is 'module(9)') are permitted to exist in this table.
.1.3.6.1.4.1.11.2.14.11.15.2.136.2.2.2.1.1,HPN-ICF-MDC-MIB::hpnicfMDCMemoryResourceMinLimit,Integer32,read-write,,current,,Limit minimum(reserve resources, must be all 0). Non-default MDC cannot set.
.1.3.6.1.4.1.11.2.14.11.15.2.136.2.2.2.1.2,HPN-ICF-MDC-MIB::hpnicfMDCMemoryResourceMaxLimit,Integer32,read-write,,current,,Maximum of available resources of memory, it specifies the ratio of the memory space that an MDC can use. Make sure this amount is sufficient for the MDC to operate properly. Non-default MDC cannot set.
.1.3.6.1.4.1.11.2.14.11.15.2.136.2.2.2.1.3,HPN-ICF-MDC-MIB::hpnicfMDCMemoryResourceReserve,Unsigned32,read-only,,current,,The reserve limit resources of memory.
.1.3.6.1.4.1.11.2.14.11.15.2.136.2.2.2.1.4,HPN-ICF-MDC-MIB::hpnicfMDCMemoryResourceQuota,Unsigned32,read-only,,current,,The total limit resources of memory.
.1.3.6.1.4.1.11.2.14.11.15.2.136.2.2.2.1.5,HPN-ICF-MDC-MIB::hpnicfMDCMemoryResourceUsage,Unsigned32,read-only,,current,,Current usage of memory resources.
.1.3.6.1.4.1.11.2.14.11.15.2.136.2.2.2.1.6,HPN-ICF-MDC-MIB::hpnicfMDCMemoryResourceAvailable,Unsigned32,read-only,,current,,Current available value of memory resources.
.1.3.6.1.4.1.11.2.14.11.15.2.136.2.2.3,HPN-ICF-MDC-MIB::hpnicfMDCCPUResourceTable,,not-accessible,,current,,This table is for CPU resource management: Specify a CPU weight for an MDC and display the CPU usage. The amount of CPU resources an MDC can use depends on the CPU weight settings for all MDCs that share the same CPU. Non-default MDC can only query CPU resources.
.1.3.6.1.4.1.11.2.14.11.15.2.136.2.2.3.1,HPN-ICF-MDC-MIB::hpnicfMDCCPUResourceEntry,,not-accessible,entPhysicalIndex:hpnicfMDCIndex,current,,An entry of the hpnicfMDCCPUResourceTable, every entry is corresponding with CPU resources of an MDC. Note that only entPhysicalIndex values that represent physical boards (i.e., associated entPhysicalClass value is 'module(9)') are permitted to exist in this table.
.1.3.6.1.4.1.11.2.14.11.15.2.136.2.2.3.1.1,HPN-ICF-MDC-MIB::hpnicfMDCCPUResourceLimit,Integer32,read-write,,current,,CPU weight-maximum of available resources of CPU, this number specifies a CPU weight for an MDC. Non-default MDC cannot set.
.1.3.6.1.4.1.11.2.14.11.15.2.136.2.2.3.1.2,HPN-ICF-MDC-MIB::hpnicfMDCCPUResourceUsage,Integer32,read-only,,current,,the CPU usage
.1.3.6.1.4.1.11.2.14.11.15.2.136.2.3,HPN-ICF-MDC-MIB::hpnicfMDCLocation,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.2.136.2.3.1,HPN-ICF-MDC-MIB::hpnicfMDCLocationTable,,not-accessible,,current,,This table is for location management: Authorize an MDC to use an interface card and query state of location. To assign physical interfaces to an MDC, administrators must authorize the MDC to use the interface cards to which the physical interfaces belong. Default: All interface cards of the device belong to the default MDC, and a non-default MDC cannot use any interface card. Non-default MDC can only query location state.
.1.3.6.1.4.1.11.2.14.11.15.2.136.2.3.1.1,HPN-ICF-MDC-MIB::hpnicfMDCLocationEntry,,not-accessible,entPhysicalIndex:hpnicfMDCIndex,current,,An entry of the hpnicfMDCLocationTable, every entry is the status whether an MDC has been Authorized to use the interface cards. Note that only entPhysicalIndex values that represent physical boards (i.e., associated entPhysicalClass value is 'module(9)') are permitted to exist in this table.
.1.3.6.1.4.1.11.2.14.11.15.2.136.2.3.1.1.1,HPN-ICF-MDC-MIB::hpnicfMDCLocationStatus,INTEGER,read-write,,current,true(1):false(2),To authorize the MDC to use the interface cards, set the value of this object to 'true (1)'. To cancel the authorization, set this value to 'false (2)'. Note that the return noError means the command is being executed. For the execution result, check hpnicfMDCLocationStatus.
.1.3.6.1.4.1.11.2.14.11.15.2.136.2.4,HPN-ICF-MDC-MIB::hpnicfMDCAllocate,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.2.136.2.4.1,HPN-ICF-MDC-MIB::hpnicfMDCGroupIfTable,,not-accessible,,current,,This table indication of relation between interfaces and groups, which helps to realize the allocation, together with hpnicfMDCAllocateTable. Non-default MDC cannot operate.
.1.3.6.1.4.1.11.2.14.11.15.2.136.2.4.1.1,HPN-ICF-MDC-MIB::hpnicfMDCGroupIfEntry,,not-accessible,entPhysicalIndex,current,,An entry of the hpnicfMDCGroupIfTable, every entry is the relationship between interfaces and groups. Due to hardware restrictions, the interfaces on some interface cards are grouped. The interfaces in a group must be assigned to the same MDC at the same time or removed from an MDC at the same time. Interface grouping depends on the device model. This table is used for hpnicfMDCAllocateTable to show interfae group lists. Note that only entPhysicalIndex values that represent physical ports (i.e., associated entPhysicalClass value is 'port(10)') are permitted to exist in this table.
.1.3.6.1.4.1.11.2.14.11.15.2.136.2.4.1.1.2,HPN-ICF-MDC-MIB::hpnicfMDCGroupIdentity,Integer32,read-only,,current,,The interface group ID. There are two parts for this id depicted as follows: 31 7 0 +++++++++++++++++++++++++++++++++++++++++ + entity index + group index + + ( bit 8..31 ) ( bit 0..7 ) + +++++++++++++++++++++++++++++++++++++++++ From bit0 to bit7 (one byte), it is interfaces group index. From bit8 to bit31 (three bytes), it is the physical index the same as the entPhysicalIndex specified in ENTITY-MIB. Note that only entPhysicalIndex values that represent physical boards (i.e., associated entPhysicalClass value is 'module(9)') are permitted to exist in this table.
.1.3.6.1.4.1.11.2.14.11.15.2.136.2.4.2,HPN-ICF-MDC-MIB::hpnicfMDCAllocateTable,,not-accessible,,current,,This table is used to assigning a physical interface to an MDC. It is allowed that allocate interfaces to a non-default MDC from the default MDC, and allocate interfaces back to the default MDC from a non-default MDC. All physical interfaces on the device belong to the default MDC, and a non-default MDC has no physical interfaces to use. Multiple physical interfaces can be assigned to a non-default MDC. A physical interface must meet the following conditions to be assigned to a non-default MDC: 1. Belongs to the default MDC. 2. Not the console or AUX port. 3. Not the management Ethernet interface. 4. Not in an interface group with an interface assigned to another MDC. 5. The default MDC uses only the physical interfaces that are not assigned to a non-default MDC. Non-default MDC cannot set this table.
.1.3.6.1.4.1.11.2.14.11.15.2.136.2.4.2.1,HPN-ICF-MDC-MIB::hpnicfMDCAllocateEntry,,not-accessible,hpnicfMDCAllocateGroupIndex,current,,An entry of the hpnicfMDCAllocateTable, every entry is the status whether physical interfaces have been assigned to an MDC.
.1.3.6.1.4.1.11.2.14.11.15.2.136.2.4.2.1.1,HPN-ICF-MDC-MIB::hpnicfMDCAllocateGroupIndex,Integer32,not-accessible,,current,,The interface group ID, the same as hpnicfMDCGroupIdentity. There are two parts for this id. depicted as follows: 31 7 0 +++++++++++++++++++++++++++++++++++++++++ + entity index + group index + + ( bit 8..31 ) ( bit 0..7 ) + +++++++++++++++++++++++++++++++++++++++++ From bit0 to bit7 (one byte), it is interfaces group index. From bit8 to bit31 (three bytes), it is the physical index the same as the entPhysicalIndex specified in ENTITY-MIB. Note that only entPhysicalIndex values that represent physical boards (i.e., associated entPhysicalClass value is 'module(9)') are permitted to exist in this table.
.1.3.6.1.4.1.11.2.14.11.15.2.136.2.4.2.1.2,HPN-ICF-MDC-MIB::hpnicfMDCAllocateGroupDescription,OCTET,read-only,,current,,Interfaces list Such as: GigabitEthernet4/5/0/1 to GigabitEthernet4/5/0/24, GigabitEthernet4/5/0/48
.1.3.6.1.4.1.11.2.14.11.15.2.136.2.4.2.1.3,HPN-ICF-MDC-MIB::hpnicfMDCAllocateMDCId,Integer32,read-write,,current,,MDC ID is used as hpnicfMDCAllocateMDCId. Default MDC: It is allowed that allocate interfaces to non-default MDC from the default MDC, and allocate interfaces back to the default MDC from a non-default MDC. Non-default MDC cannot set allocation, can only query grouping of own MDC.
.1.3.6.1.4.1.11.2.14.11.15.2.136.3,HPN-ICF-MDC-MIB::hpnicfMDCNotification,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.2.136.3.0,HPN-ICF-MDC-MIB::hpnicfMDCNotificationObjects,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.2.136.3.0.1,HPN-ICF-MDC-MIB::hpnicfMDCStateChangeToActive,,,,,,The hpnicfMDCStateChangeToActive trap indicates that the MDC status has changed to active.
.1.3.6.1.4.1.11.2.14.11.15.2.136.3.0.2,HPN-ICF-MDC-MIB::hpnicfMDCStateChangeToInactive,,,,,,The hpnicfMDCStateChangeToInactive trap indicates that the MDC status has changed to inactive.
.1.3.6.1.4.1.11.2.14.11.15.2.137,HPN-ICF-OID-MIB::hpnicfQinQv2,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.2.137.1,HPN-ICF-QINQV2-MIB::hpnicfQinQv2MibObject,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.2.137.1.1,HPN-ICF-QINQV2-MIB::hpnicfQinQv2ScalarObjects,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.2.137.1.1.1,HPN-ICF-QINQV2-MIB::hpnicfQinQv2ServiceTPID,Integer32,read-write,,current,,TPID globally configured for service VLAN tags. The global TPID value for service VLAN tags does not take effect on interfaces where hpnicfQinQIfServiceTPID is configured. By default, the global TPID for service VLAN tags is 0x8100.
.1.3.6.1.4.1.11.2.14.11.15.2.137.1.1.2,HPN-ICF-QINQV2-MIB::hpnicfQinQv2CustomerTPID,Integer32,read-write,,current,,TPID globally configured for customer VLAN tags. The global TPID value for customer VLAN tags does not take effect on interfaces where hpnicfQinQIfCustomerTPID is configured. By default, the global TPID for customer VLAN tags is 0x8100.
.1.3.6.1.4.1.11.2.14.11.15.2.137.1.2,HPN-ICF-QINQV2-MIB::hpnicfQinQv2IfCfgTable,,not-accessible,,current,,802.1 QinQ configuration table.
.1.3.6.1.4.1.11.2.14.11.15.2.137.1.2.1,HPN-ICF-QINQV2-MIB::hpnicfQinQv2IfCfgEntry,,not-accessible,ifIndex,current,,802.1 QinQ configuration entries.
.1.3.6.1.4.1.11.2.14.11.15.2.137.1.2.1.1,HPN-ICF-QINQV2-MIB::hpnicfQinQv2IfState,INTEGER,read-write,,current,true(1):false(2),802.1 QinQ functions on the port. The value is false by default.
.1.3.6.1.4.1.11.2.14.11.15.2.137.1.2.1.2,HPN-ICF-QINQV2-MIB::hpnicfQinQv2IfServiceTPID,Integer32,read-write,,current,,Service TPID value on the port.
.1.3.6.1.4.1.11.2.14.11.15.2.137.1.2.1.3,HPN-ICF-QINQV2-MIB::hpnicfQinQv2IfCustomerTPID,Integer32,read-write,,current,,Customer TPID value on the port.
.1.3.6.1.4.1.11.2.14.11.15.2.137.1.2.1.4,HPN-ICF-QINQV2-MIB::hpnicfQinQv2IfTransVlanList,OCTET,read-write,,current,,Transparent VLANs described as a bitmap. Each octet within this value specifies a set of eight VLANs. The first octet specifies VLANs 1 through 8. The second octet specifies VLANs 9 through 16, and so on. Within each octet, the most significant bit represents the highest numbered VLAN, and the least significant bit represents the lowest numbered VLAN.
.1.3.6.1.4.1.11.2.14.11.15.2.138,HPN-ICF-OID-MIB::hpnicfVmap,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.2.138.1,HPN-ICF-VMAP-MIB::hpnicfVMAPNNITable,,not-accessible,,current,,VLAN mapping NNI table.
.1.3.6.1.4.1.11.2.14.11.15.2.138.1.1,HPN-ICF-VMAP-MIB::hpnicfVMAPNNIEntry,,not-accessible,ifIndex,current,,VLAN mapping NNI table entries.
.1.3.6.1.4.1.11.2.14.11.15.2.138.1.1.1,HPN-ICF-VMAP-MIB::hpnicfVMAPNNIState,INTEGER,read-write,,current,true(1):false(2),Set the network-side interface for a many-to-one VLAN mapping.
.1.3.6.1.4.1.11.2.14.11.15.2.138.2,HPN-ICF-VMAP-MIB::hpnicfVMAP1to1Table,,not-accessible,,current,,One-to-one VLAN mapping table.
.1.3.6.1.4.1.11.2.14.11.15.2.138.2.1,HPN-ICF-VMAP-MIB::hpnicfVMAP1to1Entry,,not-accessible,ifIndex:hpnicfVMAP1to1Vlan,current,,One-to-one VLAN mapping table entries.
.1.3.6.1.4.1.11.2.14.11.15.2.138.2.1.1,HPN-ICF-VMAP-MIB::hpnicfVMAP1to1Vlan,Integer32,not-accessible,,current,,The original VLAN for a one-to-one VLAN mapping on the port.
.1.3.6.1.4.1.11.2.14.11.15.2.138.2.1.2,HPN-ICF-VMAP-MIB::hpnicfVMAP1to1TranslatedVlan,Integer32,read-create,,current,,The translated VLAN for a one-to-one VLAN mapping on the port.
.1.3.6.1.4.1.11.2.14.11.15.2.138.2.1.3,HPN-ICF-VMAP-MIB::hpnicfVMAP1to1RowStatus,INTEGER,read-create,,current,active(1):notInService(2):notReady(3):createAndGo(4):createAndWait(5):destroy(6),Operation status of this table entry.
.1.3.6.1.4.1.11.2.14.11.15.2.138.3,HPN-ICF-VMAP-MIB::hpnicfVMAPNto1RangeTable,,not-accessible,,current,,Many-to-one VLAN mapping table. The original VLANs of each entry should be a range of VLANs (for example, VLAN 20 to 30).
.1.3.6.1.4.1.11.2.14.11.15.2.138.3.1,HPN-ICF-VMAP-MIB::hpnicfVMAPNto1RangeEntry,,not-accessible,ifIndex:hpnicfVMAPNto1StartVlan,current,,Many-to-one VLAN mapping table entries. The original VLANs of each entry should be a range of VLANs (for example, VLAN 20 to 30).
.1.3.6.1.4.1.11.2.14.11.15.2.138.3.1.1,HPN-ICF-VMAP-MIB::hpnicfVMAPNto1StartVlan,Integer32,not-accessible,,current,,The original start VLAN for a many-to-one VLAN mapping on the port.
.1.3.6.1.4.1.11.2.14.11.15.2.138.3.1.2,HPN-ICF-VMAP-MIB::hpnicfVMAPNto1EndVlan,Integer32,read-create,,current,,The original end VLAN for a many-to-one VLAN mapping on the port.
.1.3.6.1.4.1.11.2.14.11.15.2.138.3.1.3,HPN-ICF-VMAP-MIB::hpnicfVMAPNto1RangeTranslatedVlan,Integer32,read-create,,current,,The translated VLAN for a many-to-one VLAN mapping on the port.
.1.3.6.1.4.1.11.2.14.11.15.2.138.3.1.4,HPN-ICF-VMAP-MIB::hpnicfVMAPNto1RangeRowStatus,INTEGER,read-create,,current,active(1):notInService(2):notReady(3):createAndGo(4):createAndWait(5):destroy(6),Operation status of this table entry.
.1.3.6.1.4.1.11.2.14.11.15.2.138.4,HPN-ICF-VMAP-MIB::hpnicfVMAPNto1SingleTable,,not-accessible,,current,,Many-to-one VLAN mapping table. The original VLANs of each entry should be a group of VLANs listed one by one (for example, VLAN 30, 31, 32).
.1.3.6.1.4.1.11.2.14.11.15.2.138.4.1,HPN-ICF-VMAP-MIB::hpnicfVMAPNto1SingleEntry,,not-accessible,ifIndex:hpnicfVMAPNto1Vlan,current,,Many-to-one VLAN mapping table entries. The original VLANs of each entry should be a group of VLANs listed one by one (for example, VLAN 30, 31, 32).
.1.3.6.1.4.1.11.2.14.11.15.2.138.4.1.1,HPN-ICF-VMAP-MIB::hpnicfVMAPNto1Vlan,Integer32,not-accessible,,current,,The original VLANs for a many-to-one VLAN mapping on the port.
.1.3.6.1.4.1.11.2.14.11.15.2.138.4.1.2,HPN-ICF-VMAP-MIB::hpnicfVMAPNto1SingleTranslatedVlan,Integer32,read-create,,current,,The translated VLAN for a many-to-one VLAN mapping on the port.
.1.3.6.1.4.1.11.2.14.11.15.2.138.4.1.3,HPN-ICF-VMAP-MIB::hpnicfVMAPNto1SingleRowStatus,INTEGER,read-create,,current,active(1):notInService(2):notReady(3):createAndGo(4):createAndWait(5):destroy(6),Operation status of this table entry.
.1.3.6.1.4.1.11.2.14.11.15.2.138.5,HPN-ICF-VMAP-MIB::hpnicfVMAP1to2RangeTable,,not-accessible,,current,,One-to-two VLAN mapping table. The original VLANs of each entry should be a range of VLANs (for example, VLAN 20 to 30).
.1.3.6.1.4.1.11.2.14.11.15.2.138.5.1,HPN-ICF-VMAP-MIB::hpnicfVMAP1to2RangeEntry,,not-accessible,ifIndex:hpnicfVMAP1to2StartVlan,current,,One-to-two VLAN mapping table entries. The original VLANs of each entry should be a range of VLANs (for example, VLAN 20 to 30).
.1.3.6.1.4.1.11.2.14.11.15.2.138.5.1.1,HPN-ICF-VMAP-MIB::hpnicfVMAP1to2StartVlan,Integer32,not-accessible,,current,,The original start VLAN for a one-to-two VLAN mapping on the port.
.1.3.6.1.4.1.11.2.14.11.15.2.138.5.1.2,HPN-ICF-VMAP-MIB::hpnicfVMAP1to2EndVlan,Integer32,read-create,,current,,The original end VLAN for a one-to-two VLAN mapping on the port.
.1.3.6.1.4.1.11.2.14.11.15.2.138.5.1.3,HPN-ICF-VMAP-MIB::hpnicfVMAP1to2RangeNestedVlan,Integer32,read-create,,current,,The outer VLAN for a one-to-two VLAN mapping on the port.
.1.3.6.1.4.1.11.2.14.11.15.2.138.5.1.4,HPN-ICF-VMAP-MIB::hpnicfVMAP1to2RangeRowStatus,INTEGER,read-create,,current,active(1):notInService(2):notReady(3):createAndGo(4):createAndWait(5):destroy(6),Operation status of this table entry.
.1.3.6.1.4.1.11.2.14.11.15.2.138.6,HPN-ICF-VMAP-MIB::hpnicfVMAP1to2SingleTable,,not-accessible,,current,,One-to-two VLAN mapping table. The original VLANs of each entry should be a group of VLANs listed one by one (for example, VLAN 30, 31, 32).
.1.3.6.1.4.1.11.2.14.11.15.2.138.6.1,HPN-ICF-VMAP-MIB::hpnicfVMAP1to2SingleEntry,,not-accessible,ifIndex:hpnicfVMAP1to2Vlan,current,,One-to-two VLAN mapping table entries. The original VLANs of each entry should be a group of VLANs listed one by one (for example, VLAN 30, 31, 32).
.1.3.6.1.4.1.11.2.14.11.15.2.138.6.1.1,HPN-ICF-VMAP-MIB::hpnicfVMAP1to2Vlan,Integer32,not-accessible,,current,,The original VLANs for a one-to-two VLAN mapping on the port.
.1.3.6.1.4.1.11.2.14.11.15.2.138.6.1.2,HPN-ICF-VMAP-MIB::hpnicfVMAP1to2SingleNestedVlan,Integer32,read-create,,current,,The outer VLAN for a one-to-two VLAN mapping on the port.
.1.3.6.1.4.1.11.2.14.11.15.2.138.6.1.3,HPN-ICF-VMAP-MIB::hpnicfVMAP1to2SingleRowStatus,INTEGER,read-create,,current,active(1):notInService(2):notReady(3):createAndGo(4):createAndWait(5):destroy(6),Operation status of this table entry.
.1.3.6.1.4.1.11.2.14.11.15.2.138.7,HPN-ICF-VMAP-MIB::hpnicfVMAP2to2Table,,not-accessible,,current,,Two-to-two VLAN mapping table.
.1.3.6.1.4.1.11.2.14.11.15.2.138.7.1,HPN-ICF-VMAP-MIB::hpnicfVMAP2to2Entry,,not-accessible,ifIndex:hpnicfVMAP2to2OuterVlan:hpnicfVMAP2to2InnerVlan,current,,Two-to-two VLAN mapping table entries.
.1.3.6.1.4.1.11.2.14.11.15.2.138.7.1.1,HPN-ICF-VMAP-MIB::hpnicfVMAP2to2OuterVlan,Integer32,not-accessible,,current,,The original outer VLAN for a two-to-two VLAN mapping on the port.
.1.3.6.1.4.1.11.2.14.11.15.2.138.7.1.2,HPN-ICF-VMAP-MIB::hpnicfVMAP2to2InnerVlan,Integer32,not-accessible,,current,,The original inner VLAN for a two-to-two VLAN mapping on the port.
.1.3.6.1.4.1.11.2.14.11.15.2.138.7.1.3,HPN-ICF-VMAP-MIB::hpnicfVMAP2to2TranslatedOuterVlan,Integer32,read-create,,current,,The translated outer VLAN for a two-to-two VLAN mapping on the port.
.1.3.6.1.4.1.11.2.14.11.15.2.138.7.1.4,HPN-ICF-VMAP-MIB::hpnicfVMAP2to2TranslatedInnerVlan,Integer32,read-create,,current,,The translated inner VLAN for a two-to-two VLAN mapping on the port.
.1.3.6.1.4.1.11.2.14.11.15.2.138.7.1.5,HPN-ICF-VMAP-MIB::hpnicfVMAP2to2RowStatus,INTEGER,read-create,,current,active(1):notInService(2):notReady(3):createAndGo(4):createAndWait(5):destroy(6),Operation status of this table entry.
.1.3.6.1.4.1.11.2.14.11.15.2.139,HPN-ICF-OID-MIB::hpnicfL2tp,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.2.139.1,HPN-ICF-L2TP-MIB::hpnicfL2tpObjects,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.2.139.1.1,HPN-ICF-L2TP-MIB::hpnicfL2tpScalar,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.2.139.1.1.1,HPN-ICF-L2TP-MIB::hpnicfL2tpStats,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.2.139.1.1.1.1,HPN-ICF-L2TP-MIB::hpnicfL2tpStatsTotalTunnels,Counter32,read-only,,current,,The total number of tunnels at the time of querying.
.1.3.6.1.4.1.11.2.14.11.15.2.139.1.1.1.2,HPN-ICF-L2TP-MIB::hpnicfL2tpStatsTotalSessions,Counter32,read-only,,current,,The total number of sessions at the time of querying.
.1.3.6.1.4.1.11.2.14.11.15.2.139.1.1.1.3,HPN-ICF-L2TP-MIB::hpnicfL2tpSessionRate,Integer32,read-only,,current,,The number of sessions that were created in the previous second.
.1.3.6.1.4.1.11.2.14.11.15.2.140,HPN-ICF-OID-MIB::hpnicfMultilinkPPPV2,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.2.140.1,HPN-ICF-MP-V2-MIB::hpnicfMpObjectsV2,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.2.140.1.1,HPN-ICF-MP-V2-MIB::hpnicfMpMultilinkV2Table,,not-accessible,,current,,This table describes the information of MP link. The index of this table is the interface index of MP group or VA (Virtual Access) interface.
.1.3.6.1.4.1.11.2.14.11.15.2.140.1.1.1,HPN-ICF-MP-V2-MIB::hpnicfMpMultilinkV2Entry,,not-accessible,ifIndex,current,,Each entry in this table describes the information of MP link. The available information includes: the father channel, the slot on which son channels are bundled, the number of bundled son channels, the statistics for lost fragments, reordered packets, unassigned packets, interleaved packets, and received/sent sequence number.
.1.3.6.1.4.1.11.2.14.11.15.2.140.1.1.1.1,HPN-ICF-MP-V2-MIB::hpnicfMpMultilinkDescrV2,OCTET,read-only,,current,,The interface name of the father interface on which son channels are bundled. It is the name of a Virtual Access or an MP group.
.1.3.6.1.4.1.11.2.14.11.15.2.140.1.1.1.2,HPN-ICF-MP-V2-MIB::hpnicfMpBundleNameV2,OCTET,read-only,,current,,The bundle name of the multilink. When authentication is configured, the bundle name is the authenticated user name; when authentication is not configured, the bundle name is multilink. 
.1.3.6.1.4.1.11.2.14.11.15.2.140.1.1.1.3,HPN-ICF-MP-V2-MIB::hpnicfMpBundledSlotV2,Integer32,read-only,,current,,The slot on which son channels are bundled. 
.1.3.6.1.4.1.11.2.14.11.15.2.140.1.1.1.4,HPN-ICF-MP-V2-MIB::hpnicfMpBundledMemberCntV2,Integer32,read-only,,current,,The number of the bundled son channel of the MP link. 
.1.3.6.1.4.1.11.2.14.11.15.2.140.1.1.1.5,HPN-ICF-MP-V2-MIB::hpnicfMpLostFragmentsV2,Counter32,read-only,,current,,The number of fragments of the MP link discarded because bad fragments were received, or assembling the packet failed, etc.
.1.3.6.1.4.1.11.2.14.11.15.2.140.1.1.1.6,HPN-ICF-MP-V2-MIB::hpnicfMpReorderedPktsV2,Counter32,read-only,,current,,The number of reordered incoming packets of the MP link. 
.1.3.6.1.4.1.11.2.14.11.15.2.140.1.1.1.7,HPN-ICF-MP-V2-MIB::hpnicfMpUnassignedPktsV2,Counter32,read-only,,current,,The number of received packets of the MP link waiting for reordering. 
.1.3.6.1.4.1.11.2.14.11.15.2.140.1.1.1.8,HPN-ICF-MP-V2-MIB::hpnicfMpInterleavedPktsV2,Counter32,read-only,,current,,The number of received packets of the MP link interleaved by the packets queued in RTPQ (Real-time Transport Protocol Queue) or LLQ (Low Latency Queue). 
.1.3.6.1.4.1.11.2.14.11.15.2.140.1.1.1.9,HPN-ICF-MP-V2-MIB::hpnicfMpRcvdSequenceV2,Integer32,read-only,,current,,The current sequence number for the MP link to receive. 
.1.3.6.1.4.1.11.2.14.11.15.2.140.1.1.1.10,HPN-ICF-MP-V2-MIB::hpnicfMpSentSequenceV2,Integer32,read-only,,current,,The current sequence number for the MP link to send. 
.1.3.6.1.4.1.11.2.14.11.15.2.140.1.2,HPN-ICF-MP-V2-MIB::hpnicfMpMemberlinkV2Table,,not-accessible,,current,,This table describes the information of son channels of the MP link. The index of this table is the interface index of MP group or VA (Virtual Access) interface. 
.1.3.6.1.4.1.11.2.14.11.15.2.140.1.2.1,HPN-ICF-MP-V2-MIB::hpnicfMpMemberlinkV2Entry,,not-accessible,ifIndex:hpnicfMpMemberlinkSeqNumberV2,current,,Each entry in this table describes the information of the bundled son channels of MP link. The available information includes: the interface index of the son channel, the interface name of the son channel. 
.1.3.6.1.4.1.11.2.14.11.15.2.140.1.2.1.1,HPN-ICF-MP-V2-MIB::hpnicfMpMemberlinkSeqNumberV2,Integer32,read-only,,current,,The bundled sequence number of the son channels of the MP link. This object is one of the index of the table. 
.1.3.6.1.4.1.11.2.14.11.15.2.140.1.2.1.2,HPN-ICF-MP-V2-MIB::hpnicfMpMemberlinkIfIndexV2,Integer32,read-only,,current,,The interface index of the son channels of the MP link. 
.1.3.6.1.4.1.11.2.14.11.15.2.140.1.2.1.3,HPN-ICF-MP-V2-MIB::hpnicfMpMemberlinkDescrV2,OCTET,read-only,,current,,The interface name of the son channels of the MP link. 
.1.3.6.1.4.1.11.2.14.11.15.2.140.1.2.1.4,HPN-ICF-MP-V2-MIB::hpnicfMpMemberlinkMpStatusV2,INTEGER,read-only,,current,active(1):inactive(2),The MP status of the son channels of the MP link. 
.1.3.6.1.4.1.11.2.14.11.15.2.141,HPN-ICF-OID-MIB::hpnicfLocAAASrv,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.2.141.1,HPN-ICF-LOCAL-AAA-SERVER-MIB::hpnicfLocAAASvrControl,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.2.141.2,HPN-ICF-LOCAL-AAA-SERVER-MIB::hpnicfLocAAASvrTables,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.2.141.3,HPN-ICF-LOCAL-AAA-SERVER-MIB::hpnicfLocAAASvrTrap,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.2.141.3.0,HPN-ICF-LOCAL-AAA-SERVER-MIB::hpnicfLocAAASvrTrapPrex,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.2.141.3.0.1,HPN-ICF-LOCAL-AAA-SERVER-MIB::hpnicfLocAAASvrBillExportFailed,,,,,,This trap is generated when local AAA bills cannot be exported to a bill server.
.1.3.6.1.4.1.11.2.14.11.15.2.142,HPN-ICF-OID-MIB::hpnicfMplsExt,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.2.142.1,HPN-ICF-MPLSEXT-MIB::hpnicfMplsExtObjects,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.2.142.1.1,HPN-ICF-MPLSEXT-MIB::hpnicfMplsExtScalarGroup,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.2.142.1.1.1,HPN-ICF-MPLSEXT-MIB::hpnicfMplsExtLsrID,OCTET,read-write,,current,,The Label Switching Router's Identifier.
.1.3.6.1.4.1.11.2.14.11.15.2.142.1.1.2,HPN-ICF-MPLSEXT-MIB::hpnicfMplsExtLdpStatus,INTEGER,read-write,,current,true(1):false(2),The global configuration of LDP(Label Distribution Protocol).
.1.3.6.1.4.1.11.2.14.11.15.2.142.1.2,HPN-ICF-MPLSEXT-MIB::hpnicfMplsExtTable,,not-accessible,,current,,A table for configuring MPLS(Multiprotocol Label Switching) parameters.
.1.3.6.1.4.1.11.2.14.11.15.2.142.1.2.1,HPN-ICF-MPLSEXT-MIB::hpnicfMplsExtEntry,,not-accessible,hpnicfMplsExtIndex,current,,An entry for configuring MPLS parameters.
.1.3.6.1.4.1.11.2.14.11.15.2.142.1.2.1.1,HPN-ICF-MPLSEXT-MIB::hpnicfMplsExtIndex,Unsigned32,not-accessible,,current,,Index of MPLS interface.
.1.3.6.1.4.1.11.2.14.11.15.2.142.1.2.1.2,HPN-ICF-MPLSEXT-MIB::hpnicfMplsExtCapability,INTEGER,read-create,,current,true(1):false(2),The MPLS capability of an interface.
.1.3.6.1.4.1.11.2.14.11.15.2.142.1.2.1.3,HPN-ICF-MPLSEXT-MIB::hpnicfMplsExtMtu,Unsigned32,read-create,,current,,The MPLS MTU(Maximum Transmission Unit) of an interface.
.1.3.6.1.4.1.11.2.14.11.15.2.142.1.2.1.4,HPN-ICF-MPLSEXT-MIB::hpnicfMplsExtRowStatus,INTEGER,read-create,,current,active(1):notInService(2):notReady(3):createAndGo(4):createAndWait(5):destroy(6),Operation status of this table entry.
.1.3.6.1.4.1.11.2.14.11.15.2.142.1.3,HPN-ICF-MPLSEXT-MIB::hpnicfMplsExtLdpTable,,not-accessible,,current,,A table for configuring LDP parameters.
.1.3.6.1.4.1.11.2.14.11.15.2.142.1.3.1,HPN-ICF-MPLSEXT-MIB::hpnicfMplsExtLdpEntry,,not-accessible,hpnicfMplsExtLdpIndex,current,,An entry for configuring LDP parameters.
.1.3.6.1.4.1.11.2.14.11.15.2.142.1.3.1.1,HPN-ICF-MPLSEXT-MIB::hpnicfMplsExtLdpIndex,Unsigned32,not-accessible,,current,,Index of LDP interface.
.1.3.6.1.4.1.11.2.14.11.15.2.142.1.3.1.2,HPN-ICF-MPLSEXT-MIB::hpnicfMplsExtLdpCapability,INTEGER,read-create,,current,true(1):false(2),The LDP capability of an interface.
.1.3.6.1.4.1.11.2.14.11.15.2.142.1.3.1.3,HPN-ICF-MPLSEXT-MIB::hpnicfMplsExtLdpRowStatus,INTEGER,read-create,,current,active(1):notInService(2):notReady(3):createAndGo(4):createAndWait(5):destroy(6),Operation status of this table entry. A row entry cannot be modified when the value of this object is 'active'.
.1.3.6.1.4.1.11.2.14.11.15.2.143,HPN-ICF-OID-MIB::hpnicfMplsTe,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.2.143.1,HPN-ICF-MPLSTE-MIB::hpnicfMplsTeObjects,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.2.143.1.1,HPN-ICF-MPLSTE-MIB::hpnicfMplsTeScalarGroup,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.2.143.1.1.1,HPN-ICF-MPLSTE-MIB::hpnicfMplsTeStatus,INTEGER,read-write,,current,true(1):false(2),The global configuration of MPLS(Multiprotocol Label Switching) TE(Traffic Engineering).
.1.3.6.1.4.1.11.2.14.11.15.2.143.1.1.2,HPN-ICF-MPLSTE-MIB::hpnicfMplsTeRsvpStatus,INTEGER,read-write,,current,true(1):false(2),The global configuration of RSVP(Resource Reservation Protocol).
.1.3.6.1.4.1.11.2.14.11.15.2.143.1.2,HPN-ICF-MPLSTE-MIB::hpnicfMplsTeTable,,not-accessible,,current,,A table for configuring MPLS TE parameters.
.1.3.6.1.4.1.11.2.14.11.15.2.143.1.2.1,HPN-ICF-MPLSTE-MIB::hpnicfMplsTeEntry,,not-accessible,hpnicfMplsTeIndex,current,,An entry for configuring MPLS TE parameters.
.1.3.6.1.4.1.11.2.14.11.15.2.143.1.2.1.1,HPN-ICF-MPLSTE-MIB::hpnicfMplsTeIndex,Unsigned32,not-accessible,,current,,Index of TE interface.
.1.3.6.1.4.1.11.2.14.11.15.2.143.1.2.1.2,HPN-ICF-MPLSTE-MIB::hpnicfMplsTeCapability,INTEGER,read-create,,current,true(1):false(2),The TE capability of an interface.
.1.3.6.1.4.1.11.2.14.11.15.2.143.1.2.1.3,HPN-ICF-MPLSTE-MIB::hpnicfMplsTeRowStatus,INTEGER,read-create,,current,active(1):notInService(2):notReady(3):createAndGo(4):createAndWait(5):destroy(6),Operation status of this table entry. A row entry cannot be modified when the value of this object is 'active'.
.1.3.6.1.4.1.11.2.14.11.15.2.143.1.3,HPN-ICF-MPLSTE-MIB::hpnicfMplsTeRsvpTable,,not-accessible,,current,,A table for configuring RSVP(Resource Reservation Protocol) TE parameters.
.1.3.6.1.4.1.11.2.14.11.15.2.143.1.3.1,HPN-ICF-MPLSTE-MIB::hpnicfMplsTeRsvpEntry,,not-accessible,hpnicfMplsTeRsvpIndex,current,,An entry for configuring RSVP TE parameters.
.1.3.6.1.4.1.11.2.14.11.15.2.143.1.3.1.1,HPN-ICF-MPLSTE-MIB::hpnicfMplsTeRsvpIndex,Unsigned32,not-accessible,,current,,Index of RSVP interface.
.1.3.6.1.4.1.11.2.14.11.15.2.143.1.3.1.2,HPN-ICF-MPLSTE-MIB::hpnicfMplsTeRsvpCapability,INTEGER,read-create,,current,true(1):false(2),The RSVP capability of an interface.
.1.3.6.1.4.1.11.2.14.11.15.2.143.1.3.1.3,HPN-ICF-MPLSTE-MIB::hpnicfMplsTeRsvpRowStatus,INTEGER,read-create,,current,active(1):notInService(2):notReady(3):createAndGo(4):createAndWait(5):destroy(6),Operation status of this table entry. A row entry cannot be modified when the value of this object is 'active'.
.1.3.6.1.4.1.11.2.14.11.15.2.144,HPN-ICF-OID-MIB::hpnicfBpa,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.2.144.1,HPN-ICF-BPA-MIB::hpnicfBpaObjects,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.2.144.1.1,HPN-ICF-BPA-MIB::hpnicfBpaCfgTable,,not-accessible,,current,,A table for BGP policy accounting configuration.
.1.3.6.1.4.1.11.2.14.11.15.2.144.1.1.1,HPN-ICF-BPA-MIB::hpnicfBpaCfgEntry,,not-accessible,ifIndex:hpnicfBpaDirection,current,,An entry for BGP policy accounting configuration.
.1.3.6.1.4.1.11.2.14.11.15.2.144.1.1.1.1,HPN-ICF-BPA-MIB::hpnicfBpaDirection,INTEGER,not-accessible,,current,input(1):output(2),Identify the direction of IP packets on which BGP policy accounting takes effect. input :input direction output :output direction
.1.3.6.1.4.1.11.2.14.11.15.2.144.1.1.1.2,HPN-ICF-BPA-MIB::hpnicfBpaSrcOrDest,INTEGER,read-create,,current,source(1):destination(2):both(3),Identify IP packet's Destination or Source IP address that BGP policy accounting relies on. source :source IP address of the IP packet destination :destination IP address of the IP packet both :both source and destination IP addresses
.1.3.6.1.4.1.11.2.14.11.15.2.144.1.1.1.3,HPN-ICF-BPA-MIB::hpnicfBpaRowStatus,INTEGER,read-create,,current,active(1):notInService(2):notReady(3):createAndGo(4):createAndWait(5):destroy(6),This object manages the creation, deletion, and modification of rows in the hpnicfBpaCfgTable, which supports the active status, createAndGo operation, and destroy operation.
.1.3.6.1.4.1.11.2.14.11.15.2.144.1.2,HPN-ICF-BPA-MIB::hpnicfBpaStatTable,,not-accessible,,current,,A table for BGP policy accounting statistics.
.1.3.6.1.4.1.11.2.14.11.15.2.144.1.2.1,HPN-ICF-BPA-MIB::hpnicfBpaStatEntry,,not-accessible,ifIndex:hpnicfBpaTrafficType:hpnicfBpaTrafficIndex,current,,An entry for BGP policy accounting statistics.
.1.3.6.1.4.1.11.2.14.11.15.2.144.1.2.1.1,HPN-ICF-BPA-MIB::hpnicfBpaTrafficType,INTEGER,not-accessible,,current,unknown(0):ipv4(1):ipv6(2):ipv4z(3):ipv6z(4):dns(16),Type of IP packets, IPv4 or IPv6.
.1.3.6.1.4.1.11.2.14.11.15.2.144.1.2.1.2,HPN-ICF-BPA-MIB::hpnicfBpaTrafficIndex,Integer32,not-accessible,,current,,Traffic index generated by a BGP policy.
.1.3.6.1.4.1.11.2.14.11.15.2.144.1.2.1.3,HPN-ICF-BPA-MIB::hpnicfBpaInPacketCount,Counter64,read-only,,current,,The total number of received packets with the specified traffic type and traffic index.
.1.3.6.1.4.1.11.2.14.11.15.2.144.1.2.1.4,HPN-ICF-BPA-MIB::hpnicfBpaInOctetCount,Counter64,read-only,,current,,The total number of received bytes with the specified traffic type and traffic index.
.1.3.6.1.4.1.11.2.14.11.15.2.144.1.2.1.5,HPN-ICF-BPA-MIB::hpnicfBpaOutPacketCount,Counter64,read-only,,current,,The total number of output packets with the specified traffic type and traffic index.
.1.3.6.1.4.1.11.2.14.11.15.2.144.1.2.1.6,HPN-ICF-BPA-MIB::hpnicfBpaOutOctetCount,Counter64,read-only,,current,,The total number of output bytes with the specified traffic type and traffic index.
.1.3.6.1.4.1.11.2.14.11.15.2.145,HPN-ICF-OID-MIB::hpnicfLicense,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.2.145.1,HPN-ICF-LICENSE-MIB::hpnicfLicenseScalarObjects,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.2.145.1.1,HPN-ICF-LICENSE-MIB::hpnicfLicenseNotifyEnable,INTEGER,read-write,,current,true(1):false(2),This object indicates whether the notifications of license should be generated.
.1.3.6.1.4.1.11.2.14.11.15.2.145.1.2,HPN-ICF-LICENSE-MIB::hpnicfLicenseOpEntryMaxNum,Unsigned32,read-write,,current,,This object indicates the maximum number of entries that may be held in hpnicfLicenseOpEntry. When the number of entries in hpnicfLicenseOpEntry reached the value of this object, the oldest entry would be destroyed automatic after executing a new operation.
.1.3.6.1.4.1.11.2.14.11.15.2.145.1.3,HPN-ICF-LICENSE-MIB::hpnicfLicenseNextFreeOpIndex,Unsigned32,read-only,,current,,This object indicates the appropriate value for hpnicfLicenseOpIndex that can be used to create an entry in hpnicfLicenseOpTable.
.1.3.6.1.4.1.11.2.14.11.15.2.145.2,HPN-ICF-LICENSE-MIB::hpnicfLicenseTables,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.2.145.2.1,HPN-ICF-LICENSE-MIB::hpnicfLicenseDevInfoTable,,not-accessible,,current,,A table that displays device information which use to apply license.
.1.3.6.1.4.1.11.2.14.11.15.2.145.2.1.1,HPN-ICF-LICENSE-MIB::hpnicfLicenseDevInfoEntry,,not-accessible,hpnicfLicensePhysicalIndex,current,,A set of objects that displays device information of license.
.1.3.6.1.4.1.11.2.14.11.15.2.145.2.1.1.1,HPN-ICF-LICENSE-MIB::hpnicfLicensePhysicalIndex,Integer32,accessible-for-notify,,current,,The entPhysicalIndex of the device. The meaning of this object is associated with the management state which from hpnicfLicenseInstallType. Note that: 1) hpnicfLicenseInstallType is installInChassis. This object represents the entPhysicalIndex of the local active MPU. 2) hpnicfLicenseInstallType is installInSlot. This object represents the entPhysicalIndex of MPU boards. 3) hpnicfLicenseInstallType is installInCPU. This object represents the entPhysicalIndex of the CPUs on an MPU board. 
.1.3.6.1.4.1.11.2.14.11.15.2.145.2.1.1.2,HPN-ICF-LICENSE-MIB::hpnicfLicenseSN,OCTET,read-only,,current,,The serial number of the device.
.1.3.6.1.4.1.11.2.14.11.15.2.145.2.1.1.3,HPN-ICF-LICENSE-MIB::hpnicfLicenseDeviceIDType,INTEGER,read-only,,current,invalid(1):keyString(2):file(3),The types of device ID. invalid - The device ID is invalid. keyString - The device ID is a string. file - The device ID is a file.
.1.3.6.1.4.1.11.2.14.11.15.2.145.2.1.1.4,HPN-ICF-LICENSE-MIB::hpnicfLicenseDeviceID,OCTET,read-only,,current,,A string represents the device ID. For example: Device ID: XXXX-XXXX-XXXX-XXXX-XXXX-XXXX-XXXX-XXXX This object can not be read when hpnicfLicenseDeviceIDType is invalid, and a file name with full path while hpnicfLicenseDeviceIDType is file. For example: Device ID: flash:/xxx.did
.1.3.6.1.4.1.11.2.14.11.15.2.145.2.1.1.5,HPN-ICF-LICENSE-MIB::hpnicfLicenseHardwareInfo,OCTET,read-only,,current,,The information of the device hardware.
.1.3.6.1.4.1.11.2.14.11.15.2.145.2.1.1.6,HPN-ICF-LICENSE-MIB::hpnicfLicenseMaxNum,Unsigned32,read-only,,current,,The max number of licenses that can be installed in device.
.1.3.6.1.4.1.11.2.14.11.15.2.145.2.1.1.7,HPN-ICF-LICENSE-MIB::hpnicfLicenseUsedNum,Unsigned32,read-only,,current,,The number of installed licenses.
.1.3.6.1.4.1.11.2.14.11.15.2.145.2.1.1.8,HPN-ICF-LICENSE-MIB::hpnicfLicenseRecyclableNum,Unsigned32,read-only,,current,,The number of recyclable storage for licenses.
.1.3.6.1.4.1.11.2.14.11.15.2.145.2.1.1.9,HPN-ICF-LICENSE-MIB::hpnicfLicenseInstallType,INTEGER,read-only,,current,invalid(1):installInChassis(2):installInSlot(3):installInCPU(4),The state of license management. This object determines the instance of hpnicfLicensePhysicalIndex and hpnicfLicenseOpPhysicalIndex. invalid - The state is invalid as driver fault. installInChassis - License is chassis locked. installInSlot - License is MPU locked. installInCPU - License is CPU locked.
.1.3.6.1.4.1.11.2.14.11.15.2.145.2.1.1.10,HPN-ICF-LICENSE-MIB::hpnicfLicenseFileStoragePath,OCTET,read-only,,current,,The storage path of the installed license files.
.1.3.6.1.4.1.11.2.14.11.15.2.145.2.2,HPN-ICF-LICENSE-MIB::hpnicfLicenseGeneralTable,,not-accessible,,current,,A table that displays general information of installed license.
.1.3.6.1.4.1.11.2.14.11.15.2.145.2.2.1,HPN-ICF-LICENSE-MIB::hpnicfLicenseGeneralEntry,,not-accessible,hpnicfLicensePhysicalIndex:hpnicfLicenseIndex,current,,A set of objects that displays general information of installed license.
.1.3.6.1.4.1.11.2.14.11.15.2.145.2.2.1.1,HPN-ICF-LICENSE-MIB::hpnicfLicenseIndex,Unsigned32,accessible-for-notify,,current,,ID that can be used to uniquely identify a license. It may use a stable storage index.
.1.3.6.1.4.1.11.2.14.11.15.2.145.2.2.1.2,HPN-ICF-LICENSE-MIB::hpnicfLicenseFeature,OCTET,read-only,,current,,The name of the licensed feature. When there multiple features, this object will display with space as delimiter.
.1.3.6.1.4.1.11.2.14.11.15.2.145.2.2.1.3,HPN-ICF-LICENSE-MIB::hpnicfLicenseProductDescr,OCTET,read-only,,current,,The product description in a license.
.1.3.6.1.4.1.11.2.14.11.15.2.145.2.2.1.4,HPN-ICF-LICENSE-MIB::hpnicfLicenseFileDescr,OCTET,read-only,,current,,The file description in activation file.
.1.3.6.1.4.1.11.2.14.11.15.2.145.2.2.1.5,HPN-ICF-LICENSE-MIB::hpnicfLicenseState,INTEGER,read-only,,current,invalid(1):inuse(2):usable(3):expired(4):uninstalled(5):unusable(6),The state of an installed license. invalid - The license is invalid and cannot be used. inuse - The license is being used. usable - The license is available for use. 1. If multiple days-restricted licenses for one feature are installed, only one license is in 'inuse' state and the rest licenses are in 'usable' state. 2. A date-restricted license is in this state if its start date is not reached. expired - The license has expired. uninstalled - The license has been uninstalled. unusable - The license cannot be used.
.1.3.6.1.4.1.11.2.14.11.15.2.145.2.2.1.6,HPN-ICF-LICENSE-MIB::hpnicfLicenseActivationFile,OCTET,read-only,,current,,The name of an installed activation file, with device name and file name. For example: flash:/license/210231A1V0A1290000012013032718261184345.ak 
.1.3.6.1.4.1.11.2.14.11.15.2.145.2.2.1.7,HPN-ICF-LICENSE-MIB::hpnicfLicenseActivationKey,OCTET,read-only,,current,,The activation key that has been installed. For example: Activation Key: dyKT-x3vc-W@Ca-n4gn-Yo83-rVY3-C8:7-e3pg
.1.3.6.1.4.1.11.2.14.11.15.2.145.2.2.1.8,HPN-ICF-LICENSE-MIB::hpnicfLicenseLicenseKey,OCTET,read-only,,current,,The license key that has been installed.
.1.3.6.1.4.1.11.2.14.11.15.2.145.2.2.1.9,HPN-ICF-LICENSE-MIB::hpnicfLicenseUninstActivationFile,OCTET,read-only,,current,,If an activation file is uninstalled, the system creates an uninstall file. Use this file together with the SN and DID of the transfer destination to register the license for the transfer destination.
.1.3.6.1.4.1.11.2.14.11.15.2.145.2.2.1.10,HPN-ICF-LICENSE-MIB::hpnicfLicenseUninstActivationKey,OCTET,read-only,,current,,If an activation key is uninstalled, the system creates an uninstall key. Use this key together with the SN and DID of the transfer destination to register the license for the transfer destination.
.1.3.6.1.4.1.11.2.14.11.15.2.145.2.2.1.11,HPN-ICF-LICENSE-MIB::hpnicfLicenseType,INTEGER,read-only,,current,unknown(1):permanent(2):daysRestricted(3):trialDaysRestricted(4):dateRestricted(5):trialDateRestricted(6):countRestricted(7):trialCountRestricted(8),License type by validity period. unknown - The system cannot obtain the license type. permanent - Purchased license that never expires and is always valid. daysRestricted - Purchased license that is valid for a period in days. trialDaysRestricted - Free trial license that is valid for a period in days. dateRestricted - Purchased license that is valid for an absolute date range. trialDateRestricted - Free trial license that is valid for an absolute date range. countRestricted - Purchased license that is valid for several useing times. trialCountRestricted - Free trial license that is valid for several useing times. 
.1.3.6.1.4.1.11.2.14.11.15.2.145.2.2.1.12,HPN-ICF-LICENSE-MIB::hpnicfLicenseInstalledTime,OCTET,read-only,,current,,Time when the license was installed. For example, it would be displayed as: 2013-9-20,13:30:15.0 
.1.3.6.1.4.1.11.2.14.11.15.2.145.2.2.1.13,HPN-ICF-LICENSE-MIB::hpnicfLicenseUninstalledTime,OCTET,read-only,,current,,The time when the license was uninstalled. For example, it would be displayed as: 2013-9-26,15:12:20.0 
.1.3.6.1.4.1.11.2.14.11.15.2.145.2.2.1.14,HPN-ICF-LICENSE-MIB::hpnicfLicenseDaysLeft,Unsigned32,read-only,,current,,Remaining days of the license. This object is available for a days-restricted license.
.1.3.6.1.4.1.11.2.14.11.15.2.145.2.2.1.15,HPN-ICF-LICENSE-MIB::hpnicfLicenseValidityStart,OCTET,read-only,,current,,Start date for a date-restricted license. This object is available for a date-restricted license. But if the start date is not limited, this object is unavailable. For example, it would be displayed as: 2013-9-26,15:12:20.0 
.1.3.6.1.4.1.11.2.14.11.15.2.145.2.2.1.16,HPN-ICF-LICENSE-MIB::hpnicfLicenseValidityEnd,OCTET,read-only,,current,,End date for a date-restricted license. This object is available for a date-restricted license. But if the end date is not limited, this object is unavailable. For example, it would be displayed as: 2014-9-26,15:12:20.0 
.1.3.6.1.4.1.11.2.14.11.15.2.145.2.2.1.17,HPN-ICF-LICENSE-MIB::hpnicfLicenseExpiredDays,Unsigned32,read-only,,current,,Passed days after a license has been expired.
.1.3.6.1.4.1.11.2.14.11.15.2.145.2.2.1.18,HPN-ICF-LICENSE-MIB::hpnicfLicenseCount,Unsigned32,read-only,,current,,The effective number of license. This object is available for a count-restricted license.
.1.3.6.1.4.1.11.2.14.11.15.2.145.2.3,HPN-ICF-LICENSE-MIB::hpnicfLicenseFeatureTable,,not-accessible,,current,,A table that displays installed licenses for features.
.1.3.6.1.4.1.11.2.14.11.15.2.145.2.3.1,HPN-ICF-LICENSE-MIB::hpnicfLicenseFeatureEntry,,not-accessible,hpnicfLicensePhysicalIndex:IMPLIEDhpnicfLicenseFeatureName,current,,A set of objects that displays installed licenses for features.
.1.3.6.1.4.1.11.2.14.11.15.2.145.2.3.1.1,HPN-ICF-LICENSE-MIB::hpnicfLicenseFeatureName,OCTET,read-only,,current,,Feature that must be licensed before being used.
.1.3.6.1.4.1.11.2.14.11.15.2.145.2.3.1.2,HPN-ICF-LICENSE-MIB::hpnicfLicenseFeatureState,INTEGER,read-only,,current,notLicensed(1):trialLicense(2):formalLicense(3),License type by purchasing state. notLicensed - The feature is not licensed. trialLicense - The feature is using trial license. formalLicense - The feature is using purchased license.
.1.3.6.1.4.1.11.2.14.11.15.2.145.2.4,HPN-ICF-LICENSE-MIB::hpnicfLicenseOpTable,,not-accessible,,current,,A table that used to install or uninstall license.
.1.3.6.1.4.1.11.2.14.11.15.2.145.2.4.1,HPN-ICF-LICENSE-MIB::hpnicfLicenseOpEntry,,not-accessible,hpnicfLicenseOpIndex,current,,A set of objects used to install or uninstall license.
.1.3.6.1.4.1.11.2.14.11.15.2.145.2.4.1.1,HPN-ICF-LICENSE-MIB::hpnicfLicenseOpIndex,Unsigned32,accessible-for-notify,,current,,ID that can be used to uniquely identify an operation.
.1.3.6.1.4.1.11.2.14.11.15.2.145.2.4.1.2,HPN-ICF-LICENSE-MIB::hpnicfLicenseOpPhysicalIndex,Integer32,read-create,,current,,This object indicates that the entPhysicalIndex of the device where the operation is being executed. The meaning of this object is associated with the management state from hpnicfLicenseInstallType. Note that: 1) hpnicfLicenseInstallType is installInChassis. This object represents the entPhysicalIndex of chassis local master. 2) hpnicfLicenseInstallType is installInSlot. This object represents the entPhysicalIndex of MPU boards. 3) hpnicfLicenseInstallType is installInCPU. This object represents the entPhysicalIndex of CPUs. This object must be set and can not be set to zero when executing an operation. 
.1.3.6.1.4.1.11.2.14.11.15.2.145.2.4.1.3,HPN-ICF-LICENSE-MIB::hpnicfLicenseOpType,INTEGER,read-create,,current,compress(1):delete(2):installActivationFile(3):installActivationKey(4):installLicenseKey(5):uninstallActivationFile(6):uninstallActivationKey(7):uninstallLicenseKey(8),The type of this operation. compress - Compress the license storage if the free license storage is not sufficient. Note that: 1) After compressing, the expired licenses and uninstalled licenses in the storage area will be cleared. 2) The DID changes each time the license storage is compressed. 3) Before performing a compression, make sure all activation files generated based on the old DID have been installed. They cannot be installed after the compression. delete - Compress one license storage only. installActivationFile - Install an activation file. installActivationKey - Install an activation key. installLicenseKey - Install a license key. uninstallActivationFile - Uninstall an activation file. uninstallActivationKey - Uninstall an activation key. uninstallLicenseKey - Uninstall a license key.
.1.3.6.1.4.1.11.2.14.11.15.2.145.2.4.1.4,HPN-ICF-LICENSE-MIB::hpnicfLicenseOpString,OCTET,read-create,,current,,This object might be an activation file name, an activation key or a license key that is to be installed, uninstalled or deleted. The operation type is specified in hpnicfLicenseOpType. For compressing, this object must not be bound when creating a row. For deletion, this object could be an activation file, an activation key or a license key. For installActivationFile and uninstallActivationFile, this object must be a name of an activation file, with full path. Such as: flash:/license/210231A1V0A1290000012013032718261184345.ak For installActivationKey and uninstallActivationKey, this object must be an activation key. For installLicenseKey and uninstallLicenseKey, this object must be a license key.
.1.3.6.1.4.1.11.2.14.11.15.2.145.2.4.1.5,HPN-ICF-LICENSE-MIB::hpnicfLicenseOpNotifyEnable,INTEGER,read-create,,current,true(1):false(2),This object indicates whether 'hpnicfLicenseOpCompletion' notifications will be generated after this operation is completed. Note that, this object is meaningless if the value of 'hpnicfLicenseNotifyEnable' is 'false'.
.1.3.6.1.4.1.11.2.14.11.15.2.145.2.4.1.6,HPN-ICF-LICENSE-MIB::hpnicfLicenseOpRowStatus,INTEGER,read-create,,current,active(1):notInService(2):notReady(3):createAndGo(4):createAndWait(5):destroy(6),The status of this conceptual row. When an entry was in active status, values of any object in this entry are forbidden to be changed.
.1.3.6.1.4.1.11.2.14.11.15.2.145.2.4.1.7,HPN-ICF-LICENSE-MIB::hpnicfLicenseOpState,INTEGER,read-only,,current,opInProgress(1):opSuccessful(2):opFailed(3),The state of this operation. opInProgress - This operation is in progress. opSuccessful - Successful to execute this operation. opFailed - Failed to execute this operation, and 'hpnicfLicenseOpFailedReason' will indicate the detailed cause of the failure.
.1.3.6.1.4.1.11.2.14.11.15.2.145.2.4.1.8,HPN-ICF-LICENSE-MIB::hpnicfLicenseOpFailedReason,OCTET,read-only,,current,,This object indicates the detailed cause of the failure when this operation failed.
.1.3.6.1.4.1.11.2.14.11.15.2.145.2.4.1.9,HPN-ICF-LICENSE-MIB::hpnicfLicenseOpEndTime,TimeTicks,read-only,,current,,The value of sysUpTime when the operation is done.
.1.3.6.1.4.1.11.2.14.11.15.2.145.3,HPN-ICF-LICENSE-MIB::hpnicfLicenseNotifications,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.2.145.3.0,HPN-ICF-LICENSE-MIB::hpnicfLicenseNotificationPrefix,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.2.145.3.0.1,HPN-ICF-LICENSE-MIB::hpnicfLicenseOpCompletion,,,,,,This notification is generated when a license operation completed.
.1.3.6.1.4.1.11.2.14.11.15.2.145.3.0.2,HPN-ICF-LICENSE-MIB::hpnicfLicenseActivationFileLost,,,,,,This notification is generated when the activation file has been lost.
.1.3.6.1.4.1.11.2.14.11.15.2.145.3.0.3,HPN-ICF-LICENSE-MIB::hpnicfLicenseActivationFileRestored,,,,,,This notification is generated when the activation file restored successfully.
.1.3.6.1.4.1.11.2.14.11.15.2.145.3.0.4,HPN-ICF-LICENSE-MIB::hpnicfLicenseExpired,,,,,,This notification is generated when the license expires.
.1.3.6.1.4.1.11.2.14.11.15.2.145.3.0.5,HPN-ICF-LICENSE-MIB::hpnicfLicenseExpireWarning,,,,,,This notification is generated when is about to expire.
.1.3.6.1.4.1.11.2.14.11.15.2.145.3.1,HPN-ICF-LICENSE-MIB::hpnicfLicenseNotificationBindings,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.2.145.3.1.1,HPN-ICF-LICENSE-MIB::hpnicfLicenseBindValidityPeriodRemaining,Unsigned32,accessible-for-notify,,current,,This object indicates the remaining days before the feature's license expires.
.1.3.6.1.4.1.11.2.14.11.15.2.146,HPN-ICF-OID-MIB::hpnicfARPSourceSuppression,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.2.148,HPN-ICF-OID-MIB::hpnicfLBv2,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.2.148.1,HPN-ICF-LBV2-MIB::hpnicfLBv2GlobalObjects,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.2.148.1.1,HPN-ICF-LBV2-MIB::hpnicfLBv2TrapEnable,INTEGER,read-write,,current,enabled(1):disabled(2),Indicates whether the module of LB will generate traps for events defined in this MIB. 'enabled' results in SNMP traps; 'disabled', no traps are sent.
.1.3.6.1.4.1.11.2.14.11.15.2.148.2,HPN-ICF-LBV2-MIB::hpnicfLBv2ActionTables,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.2.148.2.1,HPN-ICF-LBV2-MIB::hpnicfLBv2ActionTable,,not-accessible,,current,,Action table for LB.
.1.3.6.1.4.1.11.2.14.11.15.2.148.2.1.1,HPN-ICF-LBV2-MIB::hpnicfLBv2ActionEntry,,not-accessible,hpnicfLBv2ActionName,current,,An entry contains the information of the action.
.1.3.6.1.4.1.11.2.14.11.15.2.148.2.1.1.1,HPN-ICF-LBV2-MIB::hpnicfLBv2ActionName,OCTET,accessible-for-notify,,current,,Name of the action.
.1.3.6.1.4.1.11.2.14.11.15.2.148.2.1.1.2,HPN-ICF-LBV2-MIB::hpnicfLBv2ActionDefaultSF,OCTET,read-create,,current,,Default server farm quoted by the action. A zero length string indicates no default server farm has been assigned.
.1.3.6.1.4.1.11.2.14.11.15.2.148.2.1.1.3,HPN-ICF-LBV2-MIB::hpnicfLBv2ActionBackupSF,OCTET,read-create,,current,,Backup server farm quoted by the action. A zero length string indicates no backup server farm has been assigned.
.1.3.6.1.4.1.11.2.14.11.15.2.148.2.1.1.4,HPN-ICF-LBV2-MIB::hpnicfLBv2ActionInUseSF,OCTET,read-only,,current,,Server farm in use quoted by the action.
.1.3.6.1.4.1.11.2.14.11.15.2.148.2.1.1.5,HPN-ICF-LBV2-MIB::hpnicfLBv2ActionRowStatus,INTEGER,read-create,,current,active(1):notInService(2):notReady(3):createAndGo(4):createAndWait(5):destroy(6),Status of this conceptual row. When create an action, default server farm and backup server farm are optional.
.1.3.6.1.4.1.11.2.14.11.15.2.148.3,HPN-ICF-LBV2-MIB::hpnicfLBv2VSTables,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.2.148.3.1,HPN-ICF-LBV2-MIB::hpnicfLBv2VSTable,,not-accessible,,current,,Virtual server table for LB.
.1.3.6.1.4.1.11.2.14.11.15.2.148.3.1.1,HPN-ICF-LBV2-MIB::hpnicfLBv2VSEntry,,not-accessible,hpnicfLBv2VSName,current,,An entry contains the information of the virtual server.
.1.3.6.1.4.1.11.2.14.11.15.2.148.3.1.1.1,HPN-ICF-LBV2-MIB::hpnicfLBv2VSName,OCTET,accessible-for-notify,,current,,Name of the virtual server.
.1.3.6.1.4.1.11.2.14.11.15.2.148.3.1.1.2,HPN-ICF-LBV2-MIB::hpnicfLBv2VSConnectionsLimit,Unsigned32,read-create,,current,,Max connections limit of the virtual server. 0 means there is no limit.
.1.3.6.1.4.1.11.2.14.11.15.2.148.3.1.1.3,HPN-ICF-LBV2-MIB::hpnicfLBv2VSConnectionsRateLimit,Unsigned32,read-create,,current,,Max connections rate limit of the virtual server. 0 means there is no limit.
.1.3.6.1.4.1.11.2.14.11.15.2.148.3.1.1.4,HPN-ICF-LBV2-MIB::hpnicfLBv2VSDefaultSF,OCTET,read-create,,current,,Default server farm quoted by the virtual server. A zero length string indicates no default server farm has been assigned.
.1.3.6.1.4.1.11.2.14.11.15.2.148.3.1.1.5,HPN-ICF-LBV2-MIB::hpnicfLBv2VSBackupSF,OCTET,read-create,,current,,Backup server farm quoted by the virtual server. A zero length string indicates no backup server farm has been assigned.
.1.3.6.1.4.1.11.2.14.11.15.2.148.3.1.1.6,HPN-ICF-LBV2-MIB::hpnicfLBv2VSInUseSF,OCTET,read-only,,current,,Server farm in use quoted by the virtual server.
.1.3.6.1.4.1.11.2.14.11.15.2.148.3.1.1.7,HPN-ICF-LBV2-MIB::hpnicfLBv2VSRowStatus,INTEGER,read-create,,current,active(1):notInService(2):notReady(3):createAndGo(4):createAndWait(5):destroy(6),Status of this conceptual row. When create an virtual server, default server farm and backup server farm are optional.
.1.3.6.1.4.1.11.2.14.11.15.2.148.3.2,HPN-ICF-LBV2-MIB::hpnicfLBv2VSStatsTable,,not-accessible,,current,,Virtual server statistic table for LB.
.1.3.6.1.4.1.11.2.14.11.15.2.148.3.2.1,HPN-ICF-LBV2-MIB::hpnicfLBv2VSStatsEntry,,not-accessible,hpnicfLBv2VSName:hpnicfLBv2VSStatChassis:hpnicfLBv2VSStatSlot:hpnicfLBv2VSStatCpuid,current,,An entry contains the statistic information of the virtual server.
.1.3.6.1.4.1.11.2.14.11.15.2.148.3.2.1.1,HPN-ICF-LBV2-MIB::hpnicfLBv2VSStatChassis,Unsigned32,accessible-for-notify,,current,,ID of the device that holds the card.
.1.3.6.1.4.1.11.2.14.11.15.2.148.3.2.1.2,HPN-ICF-LBV2-MIB::hpnicfLBv2VSStatSlot,Unsigned32,accessible-for-notify,,current,,Member ID of the card on device.
.1.3.6.1.4.1.11.2.14.11.15.2.148.3.2.1.3,HPN-ICF-LBV2-MIB::hpnicfLBv2VSStatCpuid,Unsigned32,accessible-for-notify,,current,,ID of the CPU on the card.
.1.3.6.1.4.1.11.2.14.11.15.2.148.3.2.1.4,HPN-ICF-LBV2-MIB::hpnicfLBv2VSStatTotalConnections,Counter64,read-only,,current,,Total number of connections that the virtual server received.
.1.3.6.1.4.1.11.2.14.11.15.2.148.3.2.1.5,HPN-ICF-LBV2-MIB::hpnicfLBv2VSStatActiveConnections,Unsigned32,read-only,,current,,Active connections that the virtual server received.
.1.3.6.1.4.1.11.2.14.11.15.2.148.3.2.1.6,HPN-ICF-LBV2-MIB::hpnicfLBv2VSStatClientSidePKTsIn,Counter64,read-only,,current,,Number of packets that the virtual server received from client.
.1.3.6.1.4.1.11.2.14.11.15.2.148.3.2.1.7,HPN-ICF-LBV2-MIB::hpnicfLBv2VSStatClientSidePKTsOut,Counter64,read-only,,current,,Number of packets that the virtual server sent to client.
.1.3.6.1.4.1.11.2.14.11.15.2.148.3.2.1.8,HPN-ICF-LBV2-MIB::hpnicfLBv2VSStatDroppedPackets,Counter64,read-only,,current,,Number of packets that the virtual server dropped.
.1.3.6.1.4.1.11.2.14.11.15.2.148.3.2.1.9,HPN-ICF-LBV2-MIB::hpnicfLBv2VSStatClientSideBytesIn,Counter64,read-only,,current,,Number of bytes that the virtual server received from client.
.1.3.6.1.4.1.11.2.14.11.15.2.148.3.2.1.10,HPN-ICF-LBV2-MIB::hpnicfLBv2VSStatClientSideBytesOut,Counter64,read-only,,current,,Number of bytes that the virtual server sent to client.
.1.3.6.1.4.1.11.2.14.11.15.2.148.3.2.1.11,HPN-ICF-LBV2-MIB::hpnicfLBv2VSStatReceivedRequests,Counter64,read-only,,current,,Number of requests that the virtual server received from client.
.1.3.6.1.4.1.11.2.14.11.15.2.148.3.2.1.12,HPN-ICF-LBV2-MIB::hpnicfLBv2VSStatSentResponses,Counter64,read-only,,current,,Number of responses that the virtual server sent to client.
.1.3.6.1.4.1.11.2.14.11.15.2.148.3.2.1.13,HPN-ICF-LBV2-MIB::hpnicfLBv2VSStatConnectionsRate,Unsigned32,read-only,,current,,Connections rate of the virtual server.
.1.3.6.1.4.1.11.2.14.11.15.2.148.4,HPN-ICF-LBV2-MIB::hpnicfLBv2RSTables,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.2.148.4.1,HPN-ICF-LBV2-MIB::hpnicfLBv2RSTable,,not-accessible,,current,,Real server table for LB.
.1.3.6.1.4.1.11.2.14.11.15.2.148.4.1.1,HPN-ICF-LBV2-MIB::hpnicfLBv2RSEntry,,not-accessible,hpnicfLBv2RSName,current,,An entry contains the information of the real server.
.1.3.6.1.4.1.11.2.14.11.15.2.148.4.1.1.1,HPN-ICF-LBV2-MIB::hpnicfLBv2RSName,OCTET,accessible-for-notify,,current,,Name of the real server.
.1.3.6.1.4.1.11.2.14.11.15.2.148.4.1.1.2,HPN-ICF-LBV2-MIB::hpnicfLBv2RSRowStatus,INTEGER,read-create,,current,active(1):notInService(2):notReady(3):createAndGo(4):createAndWait(5):destroy(6),Status of this conceptual row.
.1.3.6.1.4.1.11.2.14.11.15.2.148.4.2,HPN-ICF-LBV2-MIB::hpnicfLBv2RSStatsTable,,not-accessible,,current,,Real server statistic table for LB.
.1.3.6.1.4.1.11.2.14.11.15.2.148.4.2.1,HPN-ICF-LBV2-MIB::hpnicfLBv2RSStatsEntry,,not-accessible,hpnicfLBv2RSName:hpnicfLBv2RSStatChassis:hpnicfLBv2RSStatSlot:hpnicfLBv2RSStatCpuid,current,,An entry contains the statistic information of the real server.
.1.3.6.1.4.1.11.2.14.11.15.2.148.4.2.1.1,HPN-ICF-LBV2-MIB::hpnicfLBv2RSStatChassis,Unsigned32,not-accessible,,current,,ID of the device that holds the card.
.1.3.6.1.4.1.11.2.14.11.15.2.148.4.2.1.2,HPN-ICF-LBV2-MIB::hpnicfLBv2RSStatSlot,Unsigned32,not-accessible,,current,,Member ID of the card on device.
.1.3.6.1.4.1.11.2.14.11.15.2.148.4.2.1.3,HPN-ICF-LBV2-MIB::hpnicfLBv2RSStatCpuid,Unsigned32,not-accessible,,current,,ID of the CPU on the card.
.1.3.6.1.4.1.11.2.14.11.15.2.148.4.2.1.4,HPN-ICF-LBV2-MIB::hpnicfLBv2RSStatTotalConnections,Counter64,read-only,,current,,Total number of connections that the real server received.
.1.3.6.1.4.1.11.2.14.11.15.2.148.4.2.1.5,HPN-ICF-LBV2-MIB::hpnicfLBv2RSStatActiveConnections,Unsigned32,read-only,,current,,Active connections that the real server received.
.1.3.6.1.4.1.11.2.14.11.15.2.148.4.2.1.6,HPN-ICF-LBV2-MIB::hpnicfLBv2RSStatServerSidePKTsIn,Counter64,read-only,,current,,Number of packets that the real server received from device.
.1.3.6.1.4.1.11.2.14.11.15.2.148.4.2.1.7,HPN-ICF-LBV2-MIB::hpnicfLBv2RSStatServerSidePKTsOut,Counter64,read-only,,current,,Number of packets that the real server sent.
.1.3.6.1.4.1.11.2.14.11.15.2.148.4.2.1.8,HPN-ICF-LBV2-MIB::hpnicfLBv2RSStatDroppedPackets,Counter64,read-only,,current,,Number of packets that the real server dropped.
.1.3.6.1.4.1.11.2.14.11.15.2.148.4.2.1.9,HPN-ICF-LBV2-MIB::hpnicfLBv2RSStatServerSideBytesIn,Counter64,read-only,,current,,Number of bytes that the real server received from device.
.1.3.6.1.4.1.11.2.14.11.15.2.148.4.2.1.10,HPN-ICF-LBV2-MIB::hpnicfLBv2RSStatServerSideBytesOut,Counter64,read-only,,current,,Number of bytes that the real server sent.
.1.3.6.1.4.1.11.2.14.11.15.2.148.4.2.1.11,HPN-ICF-LBV2-MIB::hpnicfLBv2RSStatReceivedRequests,Counter64,read-only,,current,,Number of requests that the real server received from device.
.1.3.6.1.4.1.11.2.14.11.15.2.148.4.2.1.12,HPN-ICF-LBV2-MIB::hpnicfLBv2RSStatSentResponses,Counter64,read-only,,current,,Number of responses that the real server sent to device.
.1.3.6.1.4.1.11.2.14.11.15.2.148.5,HPN-ICF-LBV2-MIB::hpnicfLBv2SFTables,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.2.148.5.1,HPN-ICF-LBV2-MIB::hpnicfLBv2SFTable,,not-accessible,,current,,Server farm table for LB.
.1.3.6.1.4.1.11.2.14.11.15.2.148.5.1.1,HPN-ICF-LBV2-MIB::hpnicfLBv2SFEntry,,not-accessible,hpnicfLBv2SFName,current,,An entry contains the information of the server farm.
.1.3.6.1.4.1.11.2.14.11.15.2.148.5.1.1.1,HPN-ICF-LBV2-MIB::hpnicfLBv2SFName,OCTET,accessible-for-notify,,current,,Name of the server farm.
.1.3.6.1.4.1.11.2.14.11.15.2.148.5.1.1.2,HPN-ICF-LBV2-MIB::hpnicfLBv2SFRowStatus,INTEGER,read-create,,current,active(1):notInService(2):notReady(3):createAndGo(4):createAndWait(5):destroy(6),Status of this conceptual row.
.1.3.6.1.4.1.11.2.14.11.15.2.148.5.2,HPN-ICF-LBV2-MIB::hpnicfLBv2SFStatsTable,,not-accessible,,current,,Server farm statistic for LB.
.1.3.6.1.4.1.11.2.14.11.15.2.148.5.2.1,HPN-ICF-LBV2-MIB::hpnicfLBv2SFStatsEntry,,not-accessible,hpnicfLBv2SFName:hpnicfLBv2SFStatChassis:hpnicfLBv2SFStatSlot:hpnicfLBv2SFStatCpuid,current,,An entry contains the statistic information of the server farm.
.1.3.6.1.4.1.11.2.14.11.15.2.148.5.2.1.1,HPN-ICF-LBV2-MIB::hpnicfLBv2SFStatChassis,Unsigned32,not-accessible,,current,,ID of the device that holds the card.
.1.3.6.1.4.1.11.2.14.11.15.2.148.5.2.1.2,HPN-ICF-LBV2-MIB::hpnicfLBv2SFStatSlot,Unsigned32,not-accessible,,current,,Member ID of the card on device.
.1.3.6.1.4.1.11.2.14.11.15.2.148.5.2.1.3,HPN-ICF-LBV2-MIB::hpnicfLBv2SFStatCpuid,Unsigned32,not-accessible,,current,,ID of the CPU on the card.
.1.3.6.1.4.1.11.2.14.11.15.2.148.5.2.1.4,HPN-ICF-LBV2-MIB::hpnicfLBv2SFStatTotalConnections,Counter64,read-only,,current,,Total number of connections that the server farm received.
.1.3.6.1.4.1.11.2.14.11.15.2.148.5.2.1.5,HPN-ICF-LBV2-MIB::hpnicfLBv2SFStatActiveConnections,Unsigned32,read-only,,current,,Active connections that the server farm received.
.1.3.6.1.4.1.11.2.14.11.15.2.148.5.2.1.6,HPN-ICF-LBV2-MIB::hpnicfLBv2SFStatServerSidePKTsIn,Counter64,read-only,,current,,Number of packets that the server farm received from device.
.1.3.6.1.4.1.11.2.14.11.15.2.148.5.2.1.7,HPN-ICF-LBV2-MIB::hpnicfLBv2SFStatServerSidePKTsOut,Counter64,read-only,,current,,Number of packets that the server farm sent.
.1.3.6.1.4.1.11.2.14.11.15.2.148.5.2.1.8,HPN-ICF-LBV2-MIB::hpnicfLBv2SFStatDroppedPackets,Counter64,read-only,,current,,Number of packets that the server farm dropped.
.1.3.6.1.4.1.11.2.14.11.15.2.148.5.2.1.9,HPN-ICF-LBV2-MIB::hpnicfLBv2SFStatServerSideBytesIn,Counter64,read-only,,current,,Number of bytes that the server farm received.
.1.3.6.1.4.1.11.2.14.11.15.2.148.5.2.1.10,HPN-ICF-LBV2-MIB::hpnicfLBv2SFStatServerSideBytesOut,Counter64,read-only,,current,,Number of bytes that the server farm sent.
.1.3.6.1.4.1.11.2.14.11.15.2.148.5.2.1.11,HPN-ICF-LBV2-MIB::hpnicfLBv2SFStatReceivedRequests,Counter64,read-only,,current,,Number of requests that all real servers in the server farm received from device.
.1.3.6.1.4.1.11.2.14.11.15.2.148.5.2.1.12,HPN-ICF-LBV2-MIB::hpnicfLBv2SFStatSentResponses,Counter64,read-only,,current,,Number of responses that the server farm sent to device.
.1.3.6.1.4.1.11.2.14.11.15.2.148.6,HPN-ICF-LBV2-MIB::hpnicfLBv2Trap,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.2.148.6.0,HPN-ICF-LBV2-MIB::hpnicfLBv2TrapPrefix,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.2.148.6.0.1,HPN-ICF-LBV2-MIB::hpnicfLBv2VSConnOverloadTrap,,,,,,A hpnicfLBv2VSConnOverloadTrap notification is sent when the number of active connections of the virtual server has reached the upper limit. 
.1.3.6.1.4.1.11.2.14.11.15.2.148.6.0.2,HPN-ICF-LBV2-MIB::hpnicfLBv2VSConnRecoveryTrap,,,,,,A hpnicfLBv2VSConnRecoveryTrap notification is sent when the number of active connections of the virtual server is less than the upper limit.
.1.3.6.1.4.1.11.2.14.11.15.2.148.6.0.3,HPN-ICF-LBV2-MIB::hpnicfLBv2VSConnsRateOverloadTrap,,,,,,A hpnicfLBv2VSConnsRateOverloadTrap notification is sent when the connection rate of the virtual server has reached the upper limit.
.1.3.6.1.4.1.11.2.14.11.15.2.148.6.0.4,HPN-ICF-LBV2-MIB::hpnicfLBv2VSConnsRateRecoveryTrap,,,,,,A hpnicfLBv2VSConnsRateRecoveryTrap notification is sent connection rate of the virtual server is smaller than the upper limit.
.1.3.6.1.4.1.11.2.14.11.15.2.148.6.0.5,HPN-ICF-LBV2-MIB::hpnicfLBv2VSActiveTrap,,,,,,A hpnicfLBv2VSStatusTrap notification is sent when virtual server status changes to active.
.1.3.6.1.4.1.11.2.14.11.15.2.148.6.0.6,HPN-ICF-LBV2-MIB::hpnicfLBv2VSInactiveTrap,,,,,,A hpnicfLBv2VSStatusTrap notification is sent when virtual server status changes to inactive.
.1.3.6.1.4.1.11.2.14.11.15.2.148.6.0.7,HPN-ICF-LBV2-MIB::hpnicfLBv2RSAvailableTrap,,,,,,A hpnicfLBv2RSStatusTrap notification is sent when the status of the real server changes to available.
.1.3.6.1.4.1.11.2.14.11.15.2.148.6.0.8,HPN-ICF-LBV2-MIB::hpnicfLBv2RSUnavailableTrap,,,,,,A hpnicfLBv2RSStatusTrap notification is sent when the status of the real server changes to unavailable.
.1.3.6.1.4.1.11.2.14.11.15.2.148.6.0.9,HPN-ICF-LBV2-MIB::hpnicfLBv2SFActiveTrap,,,,,,A hpnicfLBv2SFStatusTrap notification is sent when the status of the server farm changes to active.
.1.3.6.1.4.1.11.2.14.11.15.2.148.6.0.10,HPN-ICF-LBV2-MIB::hpnicfLBv2SFInactiveTrap,,,,,,A hpnicfLBv2SFStatusTrap notification is sent when the status of the server farm changes to inactive.
.1.3.6.1.4.1.11.2.14.11.15.2.148.6.0.11,HPN-ICF-LBV2-MIB::hpnicfLBv2ActionInUseSFChangeTrap,,,,,,A hpnicfLBv2VSInUseSFChangeTrap notification is sent when the server farm which is in use quoted by action changes.
.1.3.6.1.4.1.11.2.14.11.15.2.148.6.0.12,HPN-ICF-LBV2-MIB::hpnicfLBv2VSInUseSFChangeTrap,,,,,,A hpnicfLBv2ActionInUseSFChangeTrap notification is sent when the server farm which is in use quoted by virtual server changes.
.1.3.6.1.4.1.11.2.14.11.15.2.149,HPN-ICF-OID-MIB::hpnicfSession,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.2.149.1,HPN-ICF-SESSION-MIB::hpnicfSessionTables,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.2.149.1.1,HPN-ICF-SESSION-MIB::hpnicfSessionStatTable,,not-accessible,,current,,The statistics of sessions.
.1.3.6.1.4.1.11.2.14.11.15.2.149.1.1.1,HPN-ICF-SESSION-MIB::hpnicfSessionStatEntry,,not-accessible,hpnicfSessionStatChassis:hpnicfSessionStatSlot:hpnicfSessionStatCPUID,current,,An entry (conceptual row) representing session statistics information.
.1.3.6.1.4.1.11.2.14.11.15.2.149.1.1.1.1,HPN-ICF-SESSION-MIB::hpnicfSessionStatChassis,Unsigned32,not-accessible,,current,,An IRF member device ID.
.1.3.6.1.4.1.11.2.14.11.15.2.149.1.1.1.2,HPN-ICF-SESSION-MIB::hpnicfSessionStatSlot,Unsigned32,not-accessible,,current,,The slot where the card resides.
.1.3.6.1.4.1.11.2.14.11.15.2.149.1.1.1.3,HPN-ICF-SESSION-MIB::hpnicfSessionStatCPUID,Unsigned32,not-accessible,,current,,CPU ID.
.1.3.6.1.4.1.11.2.14.11.15.2.149.1.1.1.4,HPN-ICF-SESSION-MIB::hpnicfSessionStatCount,Unsigned32,read-only,,current,,The number of current sessions.
.1.3.6.1.4.1.11.2.14.11.15.2.149.1.1.1.5,HPN-ICF-SESSION-MIB::hpnicfSessionStatCreateRate,Unsigned32,read-only,,current,,The number of sessions per second.
.1.3.6.1.4.1.11.2.14.11.15.2.150,HPN-ICF-OID-MIB::hpnicfVxlan,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.2.150.1,HPN-ICF-VXLAN-MIB::hpnicfVxlanObjects,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.2.150.1.1,HPN-ICF-VXLAN-MIB::hpnicfVxlanScalarGroup,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.2.150.1.1.1,HPN-ICF-VXLAN-MIB::hpnicfVxlanLocalMacNotify,INTEGER,read-write,,current,true(1):false(2),Local MAC(Media Access Control) address report capability.
.1.3.6.1.4.1.11.2.14.11.15.2.150.1.1.2,HPN-ICF-VXLAN-MIB::hpnicfVxlanRemoteMacLearn,INTEGER,read-write,,current,true(1):false(2),Remote MAC address self-learning capability.
.1.3.6.1.4.1.11.2.14.11.15.2.150.1.1.3,HPN-ICF-VXLAN-MIB::hpnicfVxlanNextVxlanID,Unsigned32,read-only,,current,,Next available VXLAN ID(identifier), in the range of 0x0 to 0xFFFFFF. The invalid value 0xFFFFFFFF indicates that no ID can be set.
.1.3.6.1.4.1.11.2.14.11.15.2.150.1.1.4,HPN-ICF-VXLAN-MIB::hpnicfVxlanConfigured,Unsigned32,read-only,,current,,Number of currently configured VXLANs.
.1.3.6.1.4.1.11.2.14.11.15.2.150.1.2,HPN-ICF-VXLAN-MIB::hpnicfVxlanTable,,not-accessible,,current,,A table for VXLAN parameters.
.1.3.6.1.4.1.11.2.14.11.15.2.150.1.2.1,HPN-ICF-VXLAN-MIB::hpnicfVxlanEntry,,not-accessible,hpnicfVxlanID,current,,Each entry represents the parameters of a VXLAN.
.1.3.6.1.4.1.11.2.14.11.15.2.150.1.2.1.1,HPN-ICF-VXLAN-MIB::hpnicfVxlanID,Unsigned32,not-accessible,,current,,The VXLAN ID.
.1.3.6.1.4.1.11.2.14.11.15.2.150.1.2.1.2,HPN-ICF-VXLAN-MIB::hpnicfVxlanAddrType,INTEGER,read-create,,current,unknown(0):ipv4(1):ipv6(2):ipv4z(3):ipv6z(4):dns(16),The type of multicast group address.
.1.3.6.1.4.1.11.2.14.11.15.2.150.1.2.1.3,HPN-ICF-VXLAN-MIB::hpnicfVxlanGroupAddr,OCTET,read-create,,current,,Group destination address.
.1.3.6.1.4.1.11.2.14.11.15.2.150.1.2.1.4,HPN-ICF-VXLAN-MIB::hpnicfVxlanSourceAddr,OCTET,read-create,,current,,Group source address.
.1.3.6.1.4.1.11.2.14.11.15.2.150.1.2.1.5,HPN-ICF-VXLAN-MIB::hpnicfVxlanVsiIndex,Unsigned32,read-create,,current,,VSI index. A unique index for the conceptual row identifying a VSI in the hpnicfVsiTable.
.1.3.6.1.4.1.11.2.14.11.15.2.150.1.2.1.6,HPN-ICF-VXLAN-MIB::hpnicfVxlanRemoteMacCount,Unsigned32,read-only,,current,,Remote MAC address count of this VXLAN.
.1.3.6.1.4.1.11.2.14.11.15.2.150.1.2.1.7,HPN-ICF-VXLAN-MIB::hpnicfVxlanRowStatus,INTEGER,read-create,,current,active(1):notInService(2):notReady(3):createAndGo(4):createAndWait(5):destroy(6),Operation status of this table entry. When a row in this table is in active state, no objects in that row can be modified by the agent except hpnicfVxlanGroupAddr, hpnicfVxlanSourceAddr.
.1.3.6.1.4.1.11.2.14.11.15.2.150.1.3,HPN-ICF-VXLAN-MIB::hpnicfVxlanTunnelTable,,not-accessible,,current,,A table for VXLAN tunnel parameters.
.1.3.6.1.4.1.11.2.14.11.15.2.150.1.3.1,HPN-ICF-VXLAN-MIB::hpnicfVxlanTunnelEntry,,not-accessible,hpnicfVxlanID:hpnicfVxlanTunnelID,current,,Each entry represents the parameters of a VXLAN tunnel.
.1.3.6.1.4.1.11.2.14.11.15.2.150.1.3.1.1,HPN-ICF-VXLAN-MIB::hpnicfVxlanTunnelID,Unsigned32,not-accessible,,current,,A unique index for tunnel.
.1.3.6.1.4.1.11.2.14.11.15.2.150.1.3.1.2,HPN-ICF-VXLAN-MIB::hpnicfVxlanTunnelRowStatus,INTEGER,read-create,,current,active(1):notInService(2):notReady(3):createAndGo(4):createAndWait(5):destroy(6),Operation status of this table entry.
.1.3.6.1.4.1.11.2.14.11.15.2.150.1.3.1.3,HPN-ICF-VXLAN-MIB::hpnicfVxlanTunnelOctets,Counter64,read-only,,current,,The number of octets that have been forwarded over the tunnel. Discontinuities in the value of this counter can occur at re-initialization of the management system, and at other times.
.1.3.6.1.4.1.11.2.14.11.15.2.150.1.3.1.4,HPN-ICF-VXLAN-MIB::hpnicfVxlanTunnelPackets,Counter64,read-only,,current,,The number of packets that have been forwarded over the tunnel. Discontinuities in the value of this counter can occur at re-initialization of the management system and at other times.
.1.3.6.1.4.1.11.2.14.11.15.2.150.1.4,HPN-ICF-VXLAN-MIB::hpnicfVxlanTunnelBoundTable,,not-accessible,,current,,A table for the number of VXLANs to which the tunnel is bound.
.1.3.6.1.4.1.11.2.14.11.15.2.150.1.4.1,HPN-ICF-VXLAN-MIB::hpnicfVxlanTunnelBoundEntry,,not-accessible,hpnicfVxlanTunnelID,current,,An entry represents the number of VXLANs to which a tunnel is bound.
.1.3.6.1.4.1.11.2.14.11.15.2.150.1.4.1.1,HPN-ICF-VXLAN-MIB::hpnicfVxlanTunnelBoundVxlanNum,Unsigned32,read-only,,current,,The number of VXLANs to which this tunnel is bound.
.1.3.6.1.4.1.11.2.14.11.15.2.150.1.5,HPN-ICF-VXLAN-MIB::hpnicfVxlanMacTable,,not-accessible,,current,,A table for VXLAN remote MAC addresses.
.1.3.6.1.4.1.11.2.14.11.15.2.150.1.5.1,HPN-ICF-VXLAN-MIB::hpnicfVxlanMacEntry,,not-accessible,hpnicfVxlanVsiIndex:hpnicfVxlanMacAddr,current,,A VXLAN remote MAC address.
.1.3.6.1.4.1.11.2.14.11.15.2.150.1.5.1.1,HPN-ICF-VXLAN-MIB::hpnicfVxlanMacAddr,OCTET,not-accessible,,current,,MAC address.
.1.3.6.1.4.1.11.2.14.11.15.2.150.1.5.1.2,HPN-ICF-VXLAN-MIB::hpnicfVxlanMacTunnelID,Unsigned32,read-only,,current,,A unique index for tunnel.
.1.3.6.1.4.1.11.2.14.11.15.2.150.1.5.1.3,HPN-ICF-VXLAN-MIB::hpnicfVxlanMacType,INTEGER,read-only,,current,selfLearned(1):staticConfigured(2):protocolLearned(3),The type of an MAC address.
.1.3.6.1.4.1.11.2.14.11.15.2.150.1.6,HPN-ICF-VXLAN-MIB::hpnicfVxlanStaticMacTable,,not-accessible,,current,,A table for VXLAN static remote MAC addresses.
.1.3.6.1.4.1.11.2.14.11.15.2.150.1.6.1,HPN-ICF-VXLAN-MIB::hpnicfVxlanStaticMacEntry,,not-accessible,hpnicfVxlanVsiIndex:hpnicfVxlanStaticMacAddr,current,,A VXLAN static MAC address.
.1.3.6.1.4.1.11.2.14.11.15.2.150.1.6.1.1,HPN-ICF-VXLAN-MIB::hpnicfVxlanStaticMacAddr,OCTET,not-accessible,,current,,Static MAC address.
.1.3.6.1.4.1.11.2.14.11.15.2.150.1.6.1.2,HPN-ICF-VXLAN-MIB::hpnicfVxlanStaticMacTunnelID,Unsigned32,read-create,,current,,A unique index for tunnel.
.1.3.6.1.4.1.11.2.14.11.15.2.150.1.6.1.3,HPN-ICF-VXLAN-MIB::hpnicfVxlanStaticMacRowStatus,INTEGER,read-create,,current,active(1):notInService(2):notReady(3):createAndGo(4):createAndWait(5):destroy(6),Operation status of this table entry. When a row in this table is in active state, no objects in that row can be modified by the agent.
.1.3.6.1.4.1.11.2.14.11.15.2.151,HPN-ICF-OID-MIB::hpnicfRddc,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.2.151.0,HPN-ICF-RDDC-MIB::hpnicfRddcNotifications,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.2.151.0.1,HPN-ICF-RDDC-MIB::hpnicfRddcSwitchoverTrap,,,,,,Notification to signal switchover/failover.
.1.3.6.1.4.1.11.2.14.11.15.2.151.0.2,HPN-ICF-RDDC-MIB::hpnicfRddcFailIfRecoverTrap,,,,,,Notification to signal the failed interface recovered.
.1.3.6.1.4.1.11.2.14.11.15.2.151.0.3,HPN-ICF-RDDC-MIB::hpnicfRddcFailIfGenerateTrap,,,,,,Notification to signal the failed interface generated.
.1.3.6.1.4.1.11.2.14.11.15.2.151.1,HPN-ICF-RDDC-MIB::hpnicfRddcObjects,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.2.151.1.1,HPN-ICF-RDDC-MIB::hpnicfRddcInfo,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.2.151.1.1.1,HPN-ICF-RDDC-MIB::hpnicfRddcTable,,not-accessible,,current,,This table describes the current status of redundancy groups.
.1.3.6.1.4.1.11.2.14.11.15.2.151.1.1.1.1,HPN-ICF-RDDC-MIB::hpnicfRddcEntry,,not-accessible,hpnicfRddcGroupIdx,current,,The entry of hpnicfRddcEntry.
.1.3.6.1.4.1.11.2.14.11.15.2.151.1.1.1.1.1,HPN-ICF-RDDC-MIB::hpnicfRddcGroupIdx,Unsigned32,accessible-for-notify,,current,,Unique identifier of this redundancy group. 0 is an invalid value.
.1.3.6.1.4.1.11.2.14.11.15.2.151.1.1.1.1.2,HPN-ICF-RDDC-MIB::hpnicfRddcGroupName,OCTET,read-only,,current,,Unique identifier of this redundancy group.
.1.3.6.1.4.1.11.2.14.11.15.2.151.1.1.1.1.3,HPN-ICF-RDDC-MIB::hpnicfRddcPreempTimeRemain,Unsigned32,read-only,,current,,The redundancy group should not switch back immediately when a failover is recovered. The preempt delay timer is started for waiting the failover became believable. This object contains the current preempt delay time remained when a failover is recovered.
.1.3.6.1.4.1.11.2.14.11.15.2.151.1.1.1.1.4,HPN-ICF-RDDC-MIB::hpnicfRddcPreempTimeConfig,Unsigned32,read-only,,current,,The current preempt delay time.
.1.3.6.1.4.1.11.2.14.11.15.2.151.1.1.1.1.5,HPN-ICF-RDDC-MIB::hpnicfRddcHoldTimeRemain,Unsigned32,read-only,,current,,To prevent frequent switchovers of the redundancy group, the hold-down timer started to keeping in a state for a fixed time. This object contains the current remained hold-down time when a switchover or a failover recovery occurred.
.1.3.6.1.4.1.11.2.14.11.15.2.151.1.1.1.1.6,HPN-ICF-RDDC-MIB::hpnicfRddcHoldTimeConfig,Unsigned32,read-only,,current,,The current hold-down time.
.1.3.6.1.4.1.11.2.14.11.15.2.151.1.1.2,HPN-ICF-RDDC-MIB::hpnicfRddcNodeTable,,not-accessible,,current,,This table describes the current status of a redundancy group node.
.1.3.6.1.4.1.11.2.14.11.15.2.151.1.1.2.1,HPN-ICF-RDDC-MIB::hpnicfRddcNodeEntry,,not-accessible,hpnicfRddcNodeGroupIdx:hpnicfRddcNodeId,current,,The entry of hpnicfRddcNodeEntry.
.1.3.6.1.4.1.11.2.14.11.15.2.151.1.1.2.1.1,HPN-ICF-RDDC-MIB::hpnicfRddcNodeGroupIdx,Unsigned32,not-accessible,,current,,Unique identifier of this redundancy group. 0 is an invalid value.
.1.3.6.1.4.1.11.2.14.11.15.2.151.1.1.2.1.2,HPN-ICF-RDDC-MIB::hpnicfRddcNodeId,Unsigned32,not-accessible,,current,,Unique identifier of this redundancy group node. 0 is an invalid value.
.1.3.6.1.4.1.11.2.14.11.15.2.151.1.1.2.1.3,HPN-ICF-RDDC-MIB::hpnicfRddcNodeBindType,INTEGER,read-only,,current,invalid(1):chassis(2),The bind type of this redundancy group node. The current version only supports binding chassis of an IRF device.
.1.3.6.1.4.1.11.2.14.11.15.2.151.1.1.2.1.4,HPN-ICF-RDDC-MIB::hpnicfRddcNodeBindInfo,Unsigned32,read-only,,current,,The bind information of this redundancy group node. The current version only supports binding chassis of an IRF device. If the value of hpnicfRddcNodeBindType is invalid, the value of hpnicfRddcNodeBindInfo is 65535.
.1.3.6.1.4.1.11.2.14.11.15.2.151.1.1.2.1.5,HPN-ICF-RDDC-MIB::hpnicfRddcNodePriority,Unsigned32,read-only,,current,,The priority of this redundancy group node. The higher the value, the greater the priority.
.1.3.6.1.4.1.11.2.14.11.15.2.151.1.1.2.1.6,HPN-ICF-RDDC-MIB::hpnicfRddcNodeWeight,Integer32,read-only,,current,,The current weight of this redundancy group node. The max value is 255.
.1.3.6.1.4.1.11.2.14.11.15.2.151.1.1.2.1.7,HPN-ICF-RDDC-MIB::hpnicfRddcNodeStatus,INTEGER,read-only,,current,invalid(1):master(2):standby(3),The current status of this redundancy group node.
.1.3.6.1.4.1.11.2.14.11.15.2.151.1.2,HPN-ICF-RDDC-MIB::hpnicfRddcTrapObjects,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.2.151.1.2.1,HPN-ICF-RDDC-MIB::hpnicfRddcNodeInfo,OCTET,accessible-for-notify,,current,,This object contains node identification information where the switchover occurred.
.1.3.6.1.4.1.11.2.14.11.15.2.151.1.2.2,HPN-ICF-RDDC-MIB::hpnicfRddcSwitchReason,OCTET,accessible-for-notify,,current,,This object contains the cause for switchover.
.1.3.6.1.4.1.11.2.14.11.15.2.152,HPN-ICF-OID-MIB::hpnicfIpRanDcn,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.2.152.1,HPN-ICF-IPRAN-DCN-MIB::hpnicfIpRanDcnMIB,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.2.152.1.1,HPN-ICF-IPRAN-DCN-MIB::hpnicfIpRanDcnObjects,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.2.152.1.1.1,HPN-ICF-IPRAN-DCN-MIB::hpnicfIpRanDcnInfoObject,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.2.152.1.1.1.1,HPN-ICF-IPRAN-DCN-MIB::hpnicfIpRanDcnNeId,OCTET,read-only,,current,,This object indicates the ID of the local network element.
.1.3.6.1.4.1.11.2.14.11.15.2.152.1.1.1.2,HPN-ICF-IPRAN-DCN-MIB::hpnicfIpRanDcnNeIpType,INTEGER,read-only,,current,unknown(0):ipv4(1):ipv6(2):ipv4z(3):ipv6z(4):dns(16),This is the ip address type of the local network element.
.1.3.6.1.4.1.11.2.14.11.15.2.152.1.1.1.3,HPN-ICF-IPRAN-DCN-MIB::hpnicfIpRanDcnNeIp,OCTET,read-only,,current,,This is the ip address of the local network element.
.1.3.6.1.4.1.11.2.14.11.15.2.152.1.1.1.4,HPN-ICF-IPRAN-DCN-MIB::hpnicfIpRanDcnMask,OCTET,read-only,,current,,This is the ip address mask of the local network element.
.1.3.6.1.4.1.11.2.14.11.15.2.152.1.1.2,HPN-ICF-IPRAN-DCN-MIB::hpnicfIpRanDcnNeInfoTable,,not-accessible,,current,,This table provides the information of all network elements online.
.1.3.6.1.4.1.11.2.14.11.15.2.152.1.1.2.1,HPN-ICF-IPRAN-DCN-MIB::hpnicfIpRanDcnNeInfoEntry,,not-accessible,hpnicfIpRanDcnNeInfoNeId,current,,A single network element information entry.
.1.3.6.1.4.1.11.2.14.11.15.2.152.1.1.2.1.1,HPN-ICF-IPRAN-DCN-MIB::hpnicfIpRanDcnNeInfoNeId,OCTET,read-only,,current,,This is the network element ID uniquely identifying one network element in the routing domain.
.1.3.6.1.4.1.11.2.14.11.15.2.152.1.1.2.1.2,HPN-ICF-IPRAN-DCN-MIB::hpnicfIpRanDcnNeInfoNeIpType,INTEGER,read-only,,current,unknown(0):ipv4(1):ipv6(2):ipv4z(3):ipv6z(4):dns(16),This is the ip address type of the network element.
.1.3.6.1.4.1.11.2.14.11.15.2.152.1.1.2.1.3,HPN-ICF-IPRAN-DCN-MIB::hpnicfIpRanDcnNeInfoNeIp,OCTET,read-only,,current,,This is the ip address of the network element.
.1.3.6.1.4.1.11.2.14.11.15.2.152.1.1.2.1.4,HPN-ICF-IPRAN-DCN-MIB::hpnicfIpRanDcnNeInfoMetric,Integer32,read-only,,current,,The metric from the local network element to the remote network element.
.1.3.6.1.4.1.11.2.14.11.15.2.152.1.1.2.1.5,HPN-ICF-IPRAN-DCN-MIB::hpnicfIpRanDcnNeInfoDeviceType,OCTET,read-only,,current,,This is the device type of the network element.
.1.3.6.1.4.1.11.2.14.11.15.2.152.1.2,HPN-ICF-IPRAN-DCN-MIB::hpnicfIpRanDcnTrapObjects,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.2.152.1.2.1,HPN-ICF-IPRAN-DCN-MIB::hpnicfIpRanDcnNeNumber,Integer32,read-only,,current,,The overall number of network elements online.
.1.3.6.1.4.1.11.2.14.11.15.2.152.1.2.2,HPN-ICF-IPRAN-DCN-MIB::hpnicfIpRanDcnNeChangeMode,INTEGER,read-only,,current,online(1):offline(2),The change mode of the last trap.
.1.3.6.1.4.1.11.2.14.11.15.2.152.1.2.3,HPN-ICF-IPRAN-DCN-MIB::hpnicfIpRanDcnCompanyName,OCTET,read-only,,current,,The name of company.
.1.3.6.1.4.1.11.2.14.11.15.2.152.1.2.4,HPN-ICF-IPRAN-DCN-MIB::hpnicfIpRanDcnDeviceType,OCTET,read-only,,current,,The type of device.
.1.3.6.1.4.1.11.2.14.11.15.2.152.1.2.5,HPN-ICF-IPRAN-DCN-MIB::hpnicfIpRanDcnDeviceMac,OCTET,read-only,,current,,The bridge MAC address of the network element.
.1.3.6.1.4.1.11.2.14.11.15.2.152.1.3,HPN-ICF-IPRAN-DCN-MIB::hpnicfIpRanDcnTraps,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.2.152.1.3.0,HPN-ICF-IPRAN-DCN-MIB::hpnicfIpRanDcnTrapsPrefix,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.2.152.1.3.0.1,HPN-ICF-IPRAN-DCN-MIB::hpnicfIpRanDcnNeOnline,,,,,,The trap is generated when a new network element is online.
.1.3.6.1.4.1.11.2.14.11.15.2.152.1.3.0.2,HPN-ICF-IPRAN-DCN-MIB::hpnicfIpRanDcnNeOffline,,,,,,The trap is generated when a network element is offline.
.1.3.6.1.4.1.11.2.14.11.15.2.154,HPN-ICF-OID-MIB::hpnicfContext,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.2.154.1,HPN-ICF-CONTEXT-MIB::hpnicfContextTables,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.2.154.1.1,HPN-ICF-CONTEXT-MIB::hpnicfContextControl,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.2.154.1.1.1,HPN-ICF-CONTEXT-MIB::hpnicfContextControlTable,,not-accessible,,current,,This table is used to configure contexts for a device and show context status info.
.1.3.6.1.4.1.11.2.14.11.15.2.154.1.1.1.1,HPN-ICF-CONTEXT-MIB::hpnicfContextControlEntry,,not-accessible,hpnicfContextIndex,current,,An entry of the hpnicfContextControlTable. Each entry corresponds to one context.
.1.3.6.1.4.1.11.2.14.11.15.2.154.1.1.1.1.1,HPN-ICF-CONTEXT-MIB::hpnicfContextIndex,Integer32,accessible-for-notify,,current,,The value range of Context ID depends on the device model.
.1.3.6.1.4.1.11.2.14.11.15.2.154.1.1.1.1.2,HPN-ICF-CONTEXT-MIB::hpnicfContextName,OCTET,read-only,,current,,Specifies the context name, a case-sensitive string of 1 to 15 characters. The context name cannot be modified once created.
.1.3.6.1.4.1.11.2.14.11.15.2.154.8,HPN-ICF-CONTEXT-MIB::hpnicfContextNotification,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.2.154.8.0,HPN-ICF-CONTEXT-MIB::hpnicfContextNotificationObjects,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.2.154.8.0.1,HPN-ICF-CONTEXT-MIB::hpnicfContextStateChangeToActive,,,,,,The hpnicfContextStateChangeToActive trap indicates that the context status has changed to active.
.1.3.6.1.4.1.11.2.14.11.15.2.154.8.0.2,HPN-ICF-CONTEXT-MIB::hpnicfContextStateChangeToInactive,,,,,,The hpnicfContextStateChangeToInactive trap indicates that the context status has changed to inactive.
.1.3.6.1.4.1.11.2.14.11.15.3,HPN-ICF-OID-MIB::hpnicfEntityVendorTypeOID,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.3.1,HPN-ICF-ENTITY-VENDORTYPE-OID-MIB::hpnicfEntityVendortypeObjects,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.3.1.1,HPN-ICF-ENTITY-VENDORTYPE-OID-MIB::hpnicfevtOther,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.3.1.1.1,HPN-ICF-ENTITY-VENDORTYPE-OID-MIB::hpnicfevtOtherUnknownCard,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.3.1.1.2,HPN-ICF-ENTITY-VENDORTYPE-OID-MIB::hpnicfevtCPU,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.3.1.1.2.1,HPN-ICF-ENTITY-VENDORTYPE-OID-MIB::hpnicfevtGeneralCPU,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.3.1.1.3,HPN-ICF-ENTITY-VENDORTYPE-OID-MIB::hpnicfevtDOM,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.3.1.1.4,HPN-ICF-ENTITY-VENDORTYPE-OID-MIB::hpnicfevtCFCard,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.3.1.1.5,HPN-ICF-ENTITY-VENDORTYPE-OID-MIB::hpnicfevtHardDisk,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.3.1.2,HPN-ICF-ENTITY-VENDORTYPE-OID-MIB::hpnicfevtUnknown,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.3.1.3,HPN-ICF-ENTITY-VENDORTYPE-OID-MIB::hpnicfevtChassis,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.3.1.4,HPN-ICF-ENTITY-VENDORTYPE-OID-MIB::hpnicfevtBackplane,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.3.1.5,HPN-ICF-ENTITY-VENDORTYPE-OID-MIB::hpnicfevtContainer,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.3.1.6,HPN-ICF-ENTITY-VENDORTYPE-OID-MIB::hpnicfevtPowerSupply,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.3.1.6.2,HPN-ICF-ENTITY-VENDORTYPE-OID-MIB::hpnicfevtPowerSupplyAC,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.3.1.6.3,HPN-ICF-ENTITY-VENDORTYPE-OID-MIB::hpnicfevtPowerSupplyDC,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.3.1.6.4,HPN-ICF-ENTITY-VENDORTYPE-OID-MIB::hpnicfevtPowerSupplySTD130W,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.3.1.6.5,HPN-ICF-ENTITY-VENDORTYPE-OID-MIB::hpnicfevtPowerSupplySTD180W,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.3.1.6.6,HPN-ICF-ENTITY-VENDORTYPE-OID-MIB::hpnicfevtPowerSupplyPOE24Port,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.3.1.6.7,HPN-ICF-ENTITY-VENDORTYPE-OID-MIB::hpnicfevtPowerSupplyPOE48Port,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.3.1.7,HPN-ICF-ENTITY-VENDORTYPE-OID-MIB::hpnicfevtFan,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.3.1.7.1,HPN-ICF-ENTITY-VENDORTYPE-OID-MIB::hpnicfevtHotSwapFan,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.3.1.7.2,HPN-ICF-ENTITY-VENDORTYPE-OID-MIB::hpnicfevtNonHotSwapFan,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.3.1.8,HPN-ICF-ENTITY-VENDORTYPE-OID-MIB::hpnicfevtSensor,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.3.1.8.1,HPN-ICF-ENTITY-VENDORTYPE-OID-MIB::hpnicfevtSensorTemperature,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.3.1.8.2,HPN-ICF-ENTITY-VENDORTYPE-OID-MIB::hpnicfevtSensorVoltage,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.3.1.8.3,HPN-ICF-ENTITY-VENDORTYPE-OID-MIB::hpnicfevtSensorFanSpeed,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.3.1.9,HPN-ICF-ENTITY-VENDORTYPE-OID-MIB::hpnicfevtModule,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.3.1.9.1,HPN-ICF-ENTITY-VENDORTYPE-OID-MIB::hpnicfevtModuleUnknownCard,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.3.1.9.2,HPN-ICF-ENTITY-VENDORTYPE-OID-MIB::hpnicfevtModuleCommonCards,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.3.1.9.2.1,HPN-ICF-ENTITY-VENDORTYPE-OID-MIB::hpnicfevtModuleBoxCEN,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.3.1.9.2.2,HPN-ICF-ENTITY-VENDORTYPE-OID-MIB::hpnicfevtModuleBoxIRF48GE,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.3.1.9.2.3,HPN-ICF-ENTITY-VENDORTYPE-OID-MIB::hpnicfevtModuleBoxIRF24GE24TGE,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.3.1.9.2.4,HPN-ICF-ENTITY-VENDORTYPE-OID-MIB::hpnicfevtModuleChassisMpu,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.3.1.9.2.5,HPN-ICF-ENTITY-VENDORTYPE-OID-MIB::hpnicfevtModuleLPU48GE,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.3.1.9.2.6,HPN-ICF-ENTITY-VENDORTYPE-OID-MIB::hpnicfevtModuleLPU4GE4Serial,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.3.1.9.2.7,HPN-ICF-ENTITY-VENDORTYPE-OID-MIB::hpnicfevtModuleLPU4GE4Pos,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.3.1.9.2.8,HPN-ICF-ENTITY-VENDORTYPE-OID-MIB::hpnicfevtModuleLPU4GE4E1,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.3.1.9.3,HPN-ICF-ENTITY-VENDORTYPE-OID-MIB::hpnicfevtModuleRouterType,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.3.1.9.3.2,HPN-ICF-ENTITY-VENDORTYPE-OID-MIB::hpnicfevtModuleRt-As,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.3.1.9.3.3,HPN-ICF-ENTITY-VENDORTYPE-OID-MIB::hpnicfevtModuleRt-Sa,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.3.1.9.3.4,HPN-ICF-ENTITY-VENDORTYPE-OID-MIB::hpnicfevtModuleRt-Bi,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.3.1.9.3.5,HPN-ICF-ENTITY-VENDORTYPE-OID-MIB::hpnicfevtModuleRt-E12,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.3.1.9.3.6,HPN-ICF-ENTITY-VENDORTYPE-OID-MIB::hpnicfevtModuleRt-E14,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.3.1.9.3.7,HPN-ICF-ENTITY-VENDORTYPE-OID-MIB::hpnicfevtModuleRt-Fe1,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.3.1.9.3.8,HPN-ICF-ENTITY-VENDORTYPE-OID-MIB::hpnicfevtModuleRt-E1,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.3.1.9.3.9,HPN-ICF-ENTITY-VENDORTYPE-OID-MIB::hpnicfevtModuleRt-Fe2,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.3.1.9.3.11,HPN-ICF-ENTITY-VENDORTYPE-OID-MIB::hpnicfevtModuleRt-Vi2,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.3.1.9.3.12,HPN-ICF-ENTITY-VENDORTYPE-OID-MIB::hpnicfevtModuleRt-Vi4,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.3.1.9.3.13,HPN-ICF-ENTITY-VENDORTYPE-OID-MIB::hpnicfevtModuleRt-Vi30,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.3.1.9.3.14,HPN-ICF-ENTITY-VENDORTYPE-OID-MIB::hpnicfevtModuleRt-S1b,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.3.1.9.3.15,HPN-ICF-ENTITY-VENDORTYPE-OID-MIB::hpnicfevtModuleRt-Sa2,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.3.1.9.3.16,HPN-ICF-ENTITY-VENDORTYPE-OID-MIB::hpnicfevtModuleRt-As16,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.3.1.9.3.17,HPN-ICF-ENTITY-VENDORTYPE-OID-MIB::hpnicfevtModuleRt-New8as,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.3.1.9.3.18,HPN-ICF-ENTITY-VENDORTYPE-OID-MIB::hpnicfevtModuleRt-Sa1,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.3.1.9.3.19,HPN-ICF-ENTITY-VENDORTYPE-OID-MIB::hpnicfevtModuleRt-Fxs2,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.3.1.9.3.20,HPN-ICF-ENTITY-VENDORTYPE-OID-MIB::hpnicfevtModuleRt-Fxo2,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.3.1.9.3.21,HPN-ICF-ENTITY-VENDORTYPE-OID-MIB::hpnicfevtModuleRt-Em2,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.3.1.9.3.22,HPN-ICF-ENTITY-VENDORTYPE-OID-MIB::hpnicfevtModuleRt-Fxs4,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.3.1.9.3.23,HPN-ICF-ENTITY-VENDORTYPE-OID-MIB::hpnicfevtModuleRt-Fxo4,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.3.1.9.3.24,HPN-ICF-ENTITY-VENDORTYPE-OID-MIB::hpnicfevtModuleRt-Em4,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.3.1.9.3.25,HPN-ICF-ENTITY-VENDORTYPE-OID-MIB::hpnicfevtModuleRt-Sab,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.3.1.9.3.26,HPN-ICF-ENTITY-VENDORTYPE-OID-MIB::hpnicfevtModuleRt-E1vi,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.3.1.9.3.27,HPN-ICF-ENTITY-VENDORTYPE-OID-MIB::hpnicfevtModuleRt-Am12,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.3.1.9.3.28,HPN-ICF-ENTITY-VENDORTYPE-OID-MIB::hpnicfevtModuleRt-Am6,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.3.1.9.3.29,HPN-ICF-ENTITY-VENDORTYPE-OID-MIB::hpnicfevtModuleRt-Ndec,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.3.1.9.3.30,HPN-ICF-ENTITY-VENDORTYPE-OID-MIB::hpnicfevtModuleRt-Newsa2,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.3.1.9.3.31,HPN-ICF-ENTITY-VENDORTYPE-OID-MIB::hpnicfevtModuleRt-Aux,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.3.1.9.3.32,HPN-ICF-ENTITY-VENDORTYPE-OID-MIB::hpnicfevtModuleRt-Console,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.3.1.9.3.33,HPN-ICF-ENTITY-VENDORTYPE-OID-MIB::hpnicfevtModuleRt-Sic-wan,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.3.1.9.3.34,HPN-ICF-ENTITY-VENDORTYPE-OID-MIB::hpnicfevtModuleRt-Sic-1fe,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.3.1.9.3.35,HPN-ICF-ENTITY-VENDORTYPE-OID-MIB::hpnicfevtModuleRt-Sic-1sa,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.3.1.9.3.36,HPN-ICF-ENTITY-VENDORTYPE-OID-MIB::hpnicfevtModuleRt-Sic-3as,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.3.1.9.3.37,HPN-ICF-ENTITY-VENDORTYPE-OID-MIB::hpnicfevtModuleRt-Sic-1e1,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.3.1.9.3.38,HPN-ICF-ENTITY-VENDORTYPE-OID-MIB::hpnicfevtModuleRt-Sic-1t1,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.3.1.9.3.39,HPN-ICF-ENTITY-VENDORTYPE-OID-MIB::hpnicfevtModuleRt-Sic-1bu,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.3.1.9.3.40,HPN-ICF-ENTITY-VENDORTYPE-OID-MIB::hpnicfevtModuleRt-Sic-2bu,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.3.1.9.3.41,HPN-ICF-ENTITY-VENDORTYPE-OID-MIB::hpnicfevtModuleRt-Sic-1bs,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.3.1.9.3.42,HPN-ICF-ENTITY-VENDORTYPE-OID-MIB::hpnicfevtModuleRt-Sic-2bs,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.3.1.9.3.43,HPN-ICF-ENTITY-VENDORTYPE-OID-MIB::hpnicfevtModuleRt-Sic-1am,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.3.1.9.3.44,HPN-ICF-ENTITY-VENDORTYPE-OID-MIB::hpnicfevtModuleRt-Sic-2am,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.3.1.9.3.45,HPN-ICF-ENTITY-VENDORTYPE-OID-MIB::hpnicfevtModuleRt-Sic-1em,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.3.1.9.3.46,HPN-ICF-ENTITY-VENDORTYPE-OID-MIB::hpnicfevtModuleRt-Sic-2em,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.3.1.9.3.47,HPN-ICF-ENTITY-VENDORTYPE-OID-MIB::hpnicfevtModuleRt-Sic-1fxs,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.3.1.9.3.48,HPN-ICF-ENTITY-VENDORTYPE-OID-MIB::hpnicfevtModuleRt-Sic-2fxs,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.3.1.9.3.49,HPN-ICF-ENTITY-VENDORTYPE-OID-MIB::hpnicfevtModuleRt-Sic-1fxo,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.3.1.9.3.50,HPN-ICF-ENTITY-VENDORTYPE-OID-MIB::hpnicfevtModuleRt-Sic-2fxo,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.3.1.9.3.51,HPN-ICF-ENTITY-VENDORTYPE-OID-MIB::hpnicfevtModuleRt-Fcm6,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.3.1.9.3.52,HPN-ICF-ENTITY-VENDORTYPE-OID-MIB::hpnicfevtModuleRt-Sa8,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.3.1.9.3.53,HPN-ICF-ENTITY-VENDORTYPE-OID-MIB::hpnicfevtModuleRt-T11,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.3.1.9.3.54,HPN-ICF-ENTITY-VENDORTYPE-OID-MIB::hpnicfevtModuleRt-T12,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.3.1.9.3.55,HPN-ICF-ENTITY-VENDORTYPE-OID-MIB::hpnicfevtModuleRt-T14,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.3.1.9.3.56,HPN-ICF-ENTITY-VENDORTYPE-OID-MIB::hpnicfevtModuleRt-T1vi,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.3.1.9.3.57,HPN-ICF-ENTITY-VENDORTYPE-OID-MIB::hpnicfevtModuleRt-Fcm4,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.3.1.9.3.58,HPN-ICF-ENTITY-VENDORTYPE-OID-MIB::hpnicfevtModuleRt-Fcm2,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.3.1.9.3.59,HPN-ICF-ENTITY-VENDORTYPE-OID-MIB::hpnicfevtModuleRt-Rtb21ce3,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.3.1.9.3.60,HPN-ICF-ENTITY-VENDORTYPE-OID-MIB::hpnicfevtModuleRt-Ame6,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.3.1.9.3.61,HPN-ICF-ENTITY-VENDORTYPE-OID-MIB::hpnicfevtModuleRt-Ame12,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.3.1.9.3.65,HPN-ICF-ENTITY-VENDORTYPE-OID-MIB::hpnicfevtModuleRt-E11-f,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.3.1.9.3.66,HPN-ICF-ENTITY-VENDORTYPE-OID-MIB::hpnicfevtModuleRt-E12-f,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.3.1.9.3.67,HPN-ICF-ENTITY-VENDORTYPE-OID-MIB::hpnicfevtModuleRt-E14-f,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.3.1.9.3.68,HPN-ICF-ENTITY-VENDORTYPE-OID-MIB::hpnicfevtModuleRt-T11-f,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.3.1.9.3.69,HPN-ICF-ENTITY-VENDORTYPE-OID-MIB::hpnicfevtModuleRt-T12-f,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.3.1.9.3.70,HPN-ICF-ENTITY-VENDORTYPE-OID-MIB::hpnicfevtModuleRt-T14-f,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.3.1.9.3.71,HPN-ICF-ENTITY-VENDORTYPE-OID-MIB::hpnicfevtModuleRt-E11-f-17,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.3.1.9.3.72,HPN-ICF-ENTITY-VENDORTYPE-OID-MIB::hpnicfevtModuleRt-T11-f-17,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.3.1.9.3.73,HPN-ICF-ENTITY-VENDORTYPE-OID-MIB::hpnicfevtModuleRt-Rtb21ct3,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.3.1.9.3.74,HPN-ICF-ENTITY-VENDORTYPE-OID-MIB::hpnicfevtModuleRt-Atmadsl1,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.3.1.9.3.75,HPN-ICF-ENTITY-VENDORTYPE-OID-MIB::hpnicfevtModuleRt-Atmadsl2,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.3.1.9.3.76,HPN-ICF-ENTITY-VENDORTYPE-OID-MIB::hpnicfevtModuleRt-Atm155m,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.3.1.9.3.77,HPN-ICF-ENTITY-VENDORTYPE-OID-MIB::hpnicfevtModuleRt-Ase8,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.3.1.9.3.78,HPN-ICF-ENTITY-VENDORTYPE-OID-MIB::hpnicfevtModuleRt-Ase16,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.3.1.9.3.79,HPN-ICF-ENTITY-VENDORTYPE-OID-MIB::hpnicfevtModuleRt-Sae4,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.3.1.9.3.80,HPN-ICF-ENTITY-VENDORTYPE-OID-MIB::hpnicfevtModuleRt-Sae2,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.3.1.9.3.90,HPN-ICF-ENTITY-VENDORTYPE-OID-MIB::hpnicfevtModuleRt-Atmshdsl1,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.3.1.9.3.91,HPN-ICF-ENTITY-VENDORTYPE-OID-MIB::hpnicfevtModuleRt-Atmshdsl2,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.3.1.9.3.92,HPN-ICF-ENTITY-VENDORTYPE-OID-MIB::hpnicfevtModuleRt-Atmshdsl4,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.3.1.9.3.93,HPN-ICF-ENTITY-VENDORTYPE-OID-MIB::hpnicfevtModuleRt-Atm25m,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.3.1.9.3.94,HPN-ICF-ENTITY-VENDORTYPE-OID-MIB::hpnicfevtModuleRt-Atme3,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.3.1.9.3.95,HPN-ICF-ENTITY-VENDORTYPE-OID-MIB::hpnicfevtModuleRt-Atmt3,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.3.1.9.3.96,HPN-ICF-ENTITY-VENDORTYPE-OID-MIB::hpnicfevtModuleRt-Xdsl-fec,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.3.1.9.3.97,HPN-ICF-ENTITY-VENDORTYPE-OID-MIB::hpnicfevtModuleRt-Xdsl-adsl,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.3.1.9.3.98,HPN-ICF-ENTITY-VENDORTYPE-OID-MIB::hpnicfevtModuleRt-Xdsl-gshdsl,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.3.1.9.3.99,HPN-ICF-ENTITY-VENDORTYPE-OID-MIB::hpnicfevtModuleRt-Xdsl-bri,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.3.1.9.3.100,HPN-ICF-ENTITY-VENDORTYPE-OID-MIB::hpnicfevtModuleRt-Xdsl-scc,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.3.1.9.3.101,HPN-ICF-ENTITY-VENDORTYPE-OID-MIB::hpnicfevtModuleRt-Ge1,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.3.1.9.3.102,HPN-ICF-ENTITY-VENDORTYPE-OID-MIB::hpnicfevtModuleRt-Pos155m,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.3.1.9.3.103,HPN-ICF-ENTITY-VENDORTYPE-OID-MIB::hpnicfevtModuleRt-Cpos,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.3.1.9.3.104,HPN-ICF-ENTITY-VENDORTYPE-OID-MIB::hpnicfevtModuleRt-Fe1op,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.3.1.9.3.105,HPN-ICF-ENTITY-VENDORTYPE-OID-MIB::hpnicfevtModuleRt-Sae8,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.3.1.9.3.106,HPN-ICF-ENTITY-VENDORTYPE-OID-MIB::hpnicfevtModuleRt-Atm155m-mm,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.3.1.9.3.107,HPN-ICF-ENTITY-VENDORTYPE-OID-MIB::hpnicfevtModuleRt-Atm155m-sm,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.3.1.9.3.108,HPN-ICF-ENTITY-VENDORTYPE-OID-MIB::hpnicfevtModuleRt-Atm155m-sml,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.3.1.9.3.109,HPN-ICF-ENTITY-VENDORTYPE-OID-MIB::hpnicfevtModuleRt-Fe1op-sfx,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.3.1.9.3.110,HPN-ICF-ENTITY-VENDORTYPE-OID-MIB::hpnicfevtModuleRt-Fe1op-mfx,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.3.1.9.3.111,HPN-ICF-ENTITY-VENDORTYPE-OID-MIB::hpnicfevtModuleRt-Cpos-t1,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.3.1.9.3.112,HPN-ICF-ENTITY-VENDORTYPE-OID-MIB::hpnicfevtModuleRt-Ge1op,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.3.1.9.3.113,HPN-ICF-ENTITY-VENDORTYPE-OID-MIB::hpnicfevtModuleRt-Ge2op,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.3.1.9.3.114,HPN-ICF-ENTITY-VENDORTYPE-OID-MIB::hpnicfevtModuleRt-Ge2,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.3.1.9.3.115,HPN-ICF-ENTITY-VENDORTYPE-OID-MIB::hpnicfevtModuleRt-Fix-1wan,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.3.1.9.3.116,HPN-ICF-ENTITY-VENDORTYPE-OID-MIB::hpnicfevtModuleRt-Fix-1sae,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.3.1.9.3.117,HPN-ICF-ENTITY-VENDORTYPE-OID-MIB::hpnicfevtModuleRt-Cavium,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.3.1.9.3.118,HPN-ICF-ENTITY-VENDORTYPE-OID-MIB::hpnicfevtModuleRt-Sic1Eth,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.3.1.9.3.119,HPN-ICF-ENTITY-VENDORTYPE-OID-MIB::hpnicfevtModuleRt-atm1ADSLI,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.3.1.9.3.120,HPN-ICF-ENTITY-VENDORTYPE-OID-MIB::hpnicfevtModuleRt-atm2ADSLI,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.3.1.9.3.121,HPN-ICF-ENTITY-VENDORTYPE-OID-MIB::hpnicfevtModuleRt-fix-e11,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.3.1.9.3.122,HPN-ICF-ENTITY-VENDORTYPE-OID-MIB::hpnicfevtModuleRt-fix-t11,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.3.1.9.3.123,HPN-ICF-ENTITY-VENDORTYPE-OID-MIB::hpnicfevtModuleRt-e18-75,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.3.1.9.3.124,HPN-ICF-ENTITY-VENDORTYPE-OID-MIB::hpnicfevtModuleRt-e18-120,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.3.1.9.3.125,HPN-ICF-ENTITY-VENDORTYPE-OID-MIB::hpnicfevtModuleRt-t18,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.3.1.9.3.126,HPN-ICF-ENTITY-VENDORTYPE-OID-MIB::hpnicfevtModuleRt-sic-1vifxs,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.3.1.9.3.127,HPN-ICF-ENTITY-VENDORTYPE-OID-MIB::hpnicfevtModuleRt-sic-1vifxo,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.3.1.9.3.128,HPN-ICF-ENTITY-VENDORTYPE-OID-MIB::hpnicfevtModuleRt-sic-2vifxs,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.3.1.9.3.129,HPN-ICF-ENTITY-VENDORTYPE-OID-MIB::hpnicfevtModuleRt-sic-2vifxo,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.3.1.9.3.130,HPN-ICF-ENTITY-VENDORTYPE-OID-MIB::hpnicfevtModuleRt-xdsl-fec-new,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.3.1.9.3.131,HPN-ICF-ENTITY-VENDORTYPE-OID-MIB::hpnicfevtModuleRt-xdsl-sa,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.3.1.9.3.132,HPN-ICF-ENTITY-VENDORTYPE-OID-MIB::hpnicfevtModuleRt-bs4,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.3.1.9.3.133,HPN-ICF-ENTITY-VENDORTYPE-OID-MIB::hpnicfevtModuleRt-ima-8e175,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.3.1.9.3.134,HPN-ICF-ENTITY-VENDORTYPE-OID-MIB::hpnicfevtModuleRt-ima-8e1120,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.3.1.9.3.135,HPN-ICF-ENTITY-VENDORTYPE-OID-MIB::hpnicfevtModuleRt-ima-4e175,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.3.1.9.3.136,HPN-ICF-ENTITY-VENDORTYPE-OID-MIB::hpnicfevtModuleRt-ima-4e1120,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.3.1.9.3.137,HPN-ICF-ENTITY-VENDORTYPE-OID-MIB::hpnicfevtModuleRt-ima-8t1,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.3.1.9.3.138,HPN-ICF-ENTITY-VENDORTYPE-OID-MIB::hpnicfevtModuleRt-ima-4t1,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.3.1.9.3.139,HPN-ICF-ENTITY-VENDORTYPE-OID-MIB::hpnicfevtModuleRt-sic-1t1f,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.3.1.9.3.140,HPN-ICF-ENTITY-VENDORTYPE-OID-MIB::hpnicfevtModuleRt-sic-1e1f,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.3.1.9.3.141,HPN-ICF-ENTITY-VENDORTYPE-OID-MIB::hpnicfevtModuleRt-VG-16fxs,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.3.1.9.3.142,HPN-ICF-ENTITY-VENDORTYPE-OID-MIB::hpnicfevtModuleRt-VG-32fxs,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.3.1.9.3.143,HPN-ICF-ENTITY-VENDORTYPE-OID-MIB::hpnicfevtModuleRt-VG-8fxo,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.3.1.9.3.144,HPN-ICF-ENTITY-VENDORTYPE-OID-MIB::hpnicfevtModuleRt-VG-2fe,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.3.1.9.3.145,HPN-ICF-ENTITY-VENDORTYPE-OID-MIB::hpnicfevtModuleRt-sib,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.3.1.9.3.146,HPN-ICF-ENTITY-VENDORTYPE-OID-MIB::hpnicfevtModuleRt-cie32,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.3.1.9.3.147,HPN-ICF-ENTITY-VENDORTYPE-OID-MIB::hpnicfevtModuleRt-cie64,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.3.1.9.3.148,HPN-ICF-ENTITY-VENDORTYPE-OID-MIB::hpnicfevtModuleRt-cie96,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.3.1.9.3.149,HPN-ICF-ENTITY-VENDORTYPE-OID-MIB::hpnicfevtModuleRt-Fe4,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.3.1.9.3.150,HPN-ICF-ENTITY-VENDORTYPE-OID-MIB::hpnicfevtModuleRt-fxs4fxo1,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.3.1.9.3.151,HPN-ICF-ENTITY-VENDORTYPE-OID-MIB::hpnicfevtModuleRt-atm1shdsl4wire,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.3.1.9.3.152,HPN-ICF-ENTITY-VENDORTYPE-OID-MIB::hpnicfevtModuleRt-atmIma4shdsl,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.3.1.9.3.153,HPN-ICF-ENTITY-VENDORTYPE-OID-MIB::hpnicfevtModuleRt-ls4,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.3.1.9.3.154,HPN-ICF-ENTITY-VENDORTYPE-OID-MIB::hpnicfevtModuleRt-ls8,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.3.1.9.3.155,HPN-ICF-ENTITY-VENDORTYPE-OID-MIB::hpnicfevtModuleRt-ls16,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.3.1.9.3.156,HPN-ICF-ENTITY-VENDORTYPE-OID-MIB::hpnicfevtModuleRt-sic-adls2plus-isdn,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.3.1.9.3.157,HPN-ICF-ENTITY-VENDORTYPE-OID-MIB::hpnicfevtModuleRt-sic-adls2plus-pots,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.3.1.9.3.158,HPN-ICF-ENTITY-VENDORTYPE-OID-MIB::hpnicfevtModuleRt-ft3,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.3.1.9.3.159,HPN-ICF-ENTITY-VENDORTYPE-OID-MIB::hpnicfevtModuleRt-ce32,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.3.1.9.3.160,HPN-ICF-ENTITY-VENDORTYPE-OID-MIB::hpnicfevtModuleRt-bsv2,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.3.1.9.3.161,HPN-ICF-ENTITY-VENDORTYPE-OID-MIB::hpnicfevtModuleRt-bsv4,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.3.1.9.3.162,HPN-ICF-ENTITY-VENDORTYPE-OID-MIB::hpnicfevtModuleRt-RPU,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.3.1.9.3.163,HPN-ICF-ENTITY-VENDORTYPE-OID-MIB::hpnicfevtModuleRt-ERPU,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.3.1.9.3.164,HPN-ICF-ENTITY-VENDORTYPE-OID-MIB::hpnicfevtModuleRt-SSL,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.3.1.9.3.165,HPN-ICF-ENTITY-VENDORTYPE-OID-MIB::hpnicfevtModuleRt-NSA,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.3.1.9.3.200,HPN-ICF-ENTITY-VENDORTYPE-OID-MIB::hpnicfevtModuleRT-SIC-1GEC,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.3.1.9.3.201,HPN-ICF-ENTITY-VENDORTYPE-OID-MIB::hpnicfevtModuleRT-24FSW,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.3.1.9.3.202,HPN-ICF-ENTITY-VENDORTYPE-OID-MIB::hpnicfevtModuleRT-24FSWP,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.3.1.9.3.203,HPN-ICF-ENTITY-VENDORTYPE-OID-MIB::hpnicfevtModuleRT-16FSW,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.3.1.9.3.204,HPN-ICF-ENTITY-VENDORTYPE-OID-MIB::hpnicfevtModuleRT-16FSWP,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.3.1.9.3.205,HPN-ICF-ENTITY-VENDORTYPE-OID-MIB::hpnicfevtModuleRT-1VE1,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.3.1.9.3.206,HPN-ICF-ENTITY-VENDORTYPE-OID-MIB::hpnicfevtModuleRT-1VT1,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.3.1.9.3.207,HPN-ICF-ENTITY-VENDORTYPE-OID-MIB::hpnicfevtModuleRT-2VE1,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.3.1.9.3.208,HPN-ICF-ENTITY-VENDORTYPE-OID-MIB::hpnicfevtModuleRT-2VT1,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.3.1.9.3.209,HPN-ICF-ENTITY-VENDORTYPE-OID-MIB::hpnicfevtModuleRT-SIC-4FSW,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.3.1.9.3.210,HPN-ICF-ENTITY-VENDORTYPE-OID-MIB::hpnicfevtModuleRT-SIC-4FSWP,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.3.1.9.3.211,HPN-ICF-ENTITY-VENDORTYPE-OID-MIB::hpnicfevtModuleRT-DSIC-9FSW,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.3.1.9.3.212,HPN-ICF-ENTITY-VENDORTYPE-OID-MIB::hpnicfevtModuleRT-DSIC-9FSWP,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.3.1.9.3.213,HPN-ICF-ENTITY-VENDORTYPE-OID-MIB::hpnicfevtModuleRT-SIC-1VE1,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.3.1.9.3.214,HPN-ICF-ENTITY-VENDORTYPE-OID-MIB::hpnicfevtModuleRT-SIC-1VT1,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.3.1.9.3.215,HPN-ICF-ENTITY-VENDORTYPE-OID-MIB::hpnicfevtModuleRT-VCPM,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.3.1.9.3.216,HPN-ICF-ENTITY-VENDORTYPE-OID-MIB::hpnicfevtModuleRT-VPM,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.3.1.9.3.217,HPN-ICF-ENTITY-VENDORTYPE-OID-MIB::hpnicfevtModuleRT-VPMA,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.3.1.9.3.218,HPN-ICF-ENTITY-VENDORTYPE-OID-MIB::hpnicfevtModuleRT-VPMB,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.3.1.9.3.219,HPN-ICF-ENTITY-VENDORTYPE-OID-MIB::hpnicfevtModuleRT-VPMC,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.3.1.9.3.220,HPN-ICF-ENTITY-VENDORTYPE-OID-MIB::hpnicfevtModuleRt-fe18-75,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.3.1.9.3.221,HPN-ICF-ENTITY-VENDORTYPE-OID-MIB::hpnicfevtModuleRt-fe18-120,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.3.1.9.3.222,HPN-ICF-ENTITY-VENDORTYPE-OID-MIB::hpnicfevtModuleRt-ft18,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.3.1.9.3.223,HPN-ICF-ENTITY-VENDORTYPE-OID-MIB::hpnicfevtModuleRt-CF,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.3.1.9.3.224,HPN-ICF-ENTITY-VENDORTYPE-OID-MIB::hpnicfevtModuleRt-bsv2-v2,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.3.1.9.3.225,HPN-ICF-ENTITY-VENDORTYPE-OID-MIB::hpnicfevtModuleRt-e1vi1-v2,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.3.1.9.3.226,HPN-ICF-ENTITY-VENDORTYPE-OID-MIB::hpnicfevtModuleRt-e1vi2,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.3.1.9.3.227,HPN-ICF-ENTITY-VENDORTYPE-OID-MIB::hpnicfevtModuleRt-t1vi1-v2,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.3.1.9.3.228,HPN-ICF-ENTITY-VENDORTYPE-OID-MIB::hpnicfevtModuleRt-t1vi2,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.3.1.9.3.229,HPN-ICF-ENTITY-VENDORTYPE-OID-MIB::hpnicfevtModuleRt-osm,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.3.1.9.3.230,HPN-ICF-ENTITY-VENDORTYPE-OID-MIB::hpnicfevtModuleRt-sd707,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.3.1.9.3.231,HPN-ICF-ENTITY-VENDORTYPE-OID-MIB::hpnicfevtModuleRt-dm-epri,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.3.1.9.3.232,HPN-ICF-ENTITY-VENDORTYPE-OID-MIB::hpnicfevtModuleRt-dm-tpri,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.3.1.9.3.233,HPN-ICF-ENTITY-VENDORTYPE-OID-MIB::hpnicfevtModuleRt-ERPU-H,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.3.1.9.3.234,HPN-ICF-ENTITY-VENDORTYPE-OID-MIB::hpnicfevtModuleRT-SIC-1BSV,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.3.1.9.3.235,HPN-ICF-ENTITY-VENDORTYPE-OID-MIB::hpnicfevtModuleRT-SIC-2BSV,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.3.1.9.3.236,HPN-ICF-ENTITY-VENDORTYPE-OID-MIB::hpnicfevtModuleRt-gbe8,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.3.1.9.3.237,HPN-ICF-ENTITY-VENDORTYPE-OID-MIB::hpnicfevtModuleRt-gbe4,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.3.1.9.3.238,HPN-ICF-ENTITY-VENDORTYPE-OID-MIB::hpnicfevtModuleRt-cpos2-v2,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.3.1.9.3.239,HPN-ICF-ENTITY-VENDORTYPE-OID-MIB::hpnicfevtModuleRt-cpos1-v2,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.3.1.9.3.240,HPN-ICF-ENTITY-VENDORTYPE-OID-MIB::hpnicfevtModuleRt-oap,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.3.1.9.3.241,HPN-ICF-ENTITY-VENDORTYPE-OID-MIB::hpnicfevtModuleRT-48FSWP,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.3.1.9.3.242,HPN-ICF-ENTITY-VENDORTYPE-OID-MIB::hpnicfevtModuleRT-48FSW,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.3.1.9.3.243,HPN-ICF-ENTITY-VENDORTYPE-OID-MIB::hpnicfevtModuleRT-ASM,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.3.1.9.3.244,HPN-ICF-ENTITY-VENDORTYPE-OID-MIB::hpnicfevtModuleRT-SIC-1FEF,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.3.1.9.3.245,HPN-ICF-ENTITY-VENDORTYPE-OID-MIB::hpnicfevtModuleRT-XMIM-24FSW,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.3.1.9.3.246,HPN-ICF-ENTITY-VENDORTYPE-OID-MIB::hpnicfevtModuleRT-WLAN-AG-1RADIO,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.3.1.9.3.247,HPN-ICF-ENTITY-VENDORTYPE-OID-MIB::hpnicfevtModuleRT-1CE3,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.3.1.9.3.248,HPN-ICF-ENTITY-VENDORTYPE-OID-MIB::hpnicfevtModuleRT-XMIM-16FSW,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.3.1.9.3.249,HPN-ICF-ENTITY-VENDORTYPE-OID-MIB::hpnicfevtModuleRT-OAPS,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.3.1.9.3.250,HPN-ICF-ENTITY-VENDORTYPE-OID-MIB::hpnicfevtModuleRT-NAM,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.3.1.9.3.251,HPN-ICF-ENTITY-VENDORTYPE-OID-MIB::hpnicfevtModuleRT-RPE-X1,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.3.1.9.3.252,HPN-ICF-ENTITY-VENDORTYPE-OID-MIB::hpnicfevtModuleRT-FIP-100,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.3.1.9.3.253,HPN-ICF-ENTITY-VENDORTYPE-OID-MIB::hpnicfevtModuleRT-FIP-200,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.3.1.9.3.254,HPN-ICF-ENTITY-VENDORTYPE-OID-MIB::hpnicfevtModuleRT-SIC-8AS,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.3.1.9.3.255,HPN-ICF-ENTITY-VENDORTYPE-OID-MIB::hpnicfevtModuleRT-WAAM,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.3.1.9.3.256,HPN-ICF-ENTITY-VENDORTYPE-OID-MIB::hpnicfevtModuleRt-msp4p-OC3c,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.3.1.9.3.257,HPN-ICF-ENTITY-VENDORTYPE-OID-MIB::hpnicfevtModuleRt-1pos-oc48,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.3.1.9.3.258,HPN-ICF-ENTITY-VENDORTYPE-OID-MIB::hpnicfevtModuleRt-xgbe,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.3.1.9.3.259,HPN-ICF-ENTITY-VENDORTYPE-OID-MIB::hpnicfevtModuleRT-EADM,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.3.1.9.3.260,HPN-ICF-ENTITY-VENDORTYPE-OID-MIB::hpnicfevtModuleRT-VCM,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.3.1.9.3.261,HPN-ICF-ENTITY-VENDORTYPE-OID-MIB::hpnicfevtModuleRT-SIC-2FXS1FXO,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.3.1.9.3.262,HPN-ICF-ENTITY-VENDORTYPE-OID-MIB::hpnicfevtModuleRT-8FXS8FXO,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.3.1.9.3.263,HPN-ICF-ENTITY-VENDORTYPE-OID-MIB::hpnicfevtModuleRT-16FXS,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.3.1.9.3.264,HPN-ICF-ENTITY-VENDORTYPE-OID-MIB::hpnicfevtModuleRT-OAPS-ICM,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.3.1.9.3.265,HPN-ICF-ENTITY-VENDORTYPE-OID-MIB::hpnicfevtModuleRT-OAP-ICM,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.3.1.9.3.266,HPN-ICF-ENTITY-VENDORTYPE-OID-MIB::hpnicfevtModuleRT-8fe,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.3.1.9.3.267,HPN-ICF-ENTITY-VENDORTYPE-OID-MIB::hpnicfevtModuleRT-4gbp,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.3.1.9.3.268,HPN-ICF-ENTITY-VENDORTYPE-OID-MIB::hpnicfevtModuleRT-MPU-G2,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.3.1.9.3.269,HPN-ICF-ENTITY-VENDORTYPE-OID-MIB::hpnicfevtModuleRT-OAPS-OCE,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.3.1.9.3.270,HPN-ICF-ENTITY-VENDORTYPE-OID-MIB::hpnicfevtModuleRT-OAP-OCE,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.3.1.9.3.271,HPN-ICF-ENTITY-VENDORTYPE-OID-MIB::hpnicfevtModuleRT-OAPS-ICE,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.3.1.9.3.272,HPN-ICF-ENTITY-VENDORTYPE-OID-MIB::hpnicfevtModuleRT-OAP-ICE,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.3.1.9.3.273,HPN-ICF-ENTITY-VENDORTYPE-OID-MIB::hpnicfevtModuleRT-SIC-16AS,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.3.1.9.3.274,HPN-ICF-ENTITY-VENDORTYPE-OID-MIB::hpnicfevtModuleRT-SPE-FWM,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.3.1.9.3.275,HPN-ICF-ENTITY-VENDORTYPE-OID-MIB::hpnicfevtModuleRT-cls2p,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.3.1.9.3.276,HPN-ICF-ENTITY-VENDORTYPE-OID-MIB::hpnicfevtModuleRT-cls1p,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.3.1.9.3.277,HPN-ICF-ENTITY-VENDORTYPE-OID-MIB::hpnicfevtModuleRT-SIC-2E1-F,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.3.1.9.3.278,HPN-ICF-ENTITY-VENDORTYPE-OID-MIB::hpnicfevtModuleRT-SIC-1E1-F-V2,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.3.1.9.3.279,HPN-ICF-ENTITY-VENDORTYPE-OID-MIB::hpnicfevtModuleRT-MCU,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.3.1.9.3.280,HPN-ICF-ENTITY-VENDORTYPE-OID-MIB::hpnicfevtModuleRT-ACU,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.3.1.9.3.281,HPN-ICF-ENTITY-VENDORTYPE-OID-MIB::hpnicfevtModuleRT-1ATM-OC3,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.3.1.9.3.282,HPN-ICF-ENTITY-VENDORTYPE-OID-MIB::hpnicfevtModuleRT-RSE-X1,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.3.1.9.3.283,HPN-ICF-ENTITY-VENDORTYPE-OID-MIB::hpnicfevtModuleRT-FIP-210,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.3.1.9.3.284,HPN-ICF-ENTITY-VENDORTYPE-OID-MIB::hpnicfevtModuleRT-1expa,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.3.1.9.3.285,HPN-ICF-ENTITY-VENDORTYPE-OID-MIB::hpnicfevtModuleRT-WLAN-SIC-N-1RADIO,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.3.1.9.3.286,HPN-ICF-ENTITY-VENDORTYPE-OID-MIB::hpnicfevtModuleRT-WLAN-SIC-BG-1RADIO,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.3.1.9.3.287,HPN-ICF-ENTITY-VENDORTYPE-OID-MIB::hpnicfevtModuleRT-al2p,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.3.1.9.3.288,HPN-ICF-ENTITY-VENDORTYPE-OID-MIB::hpnicfevtModuleRT-msp2p-OC3c,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.3.1.9.3.289,HPN-ICF-ENTITY-VENDORTYPE-OID-MIB::hpnicfevtModuleRT-8gbp,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.3.1.9.3.290,HPN-ICF-ENTITY-VENDORTYPE-OID-MIB::hpnicfevtModuleRT-SIC-EPON,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.3.1.9.3.291,HPN-ICF-ENTITY-VENDORTYPE-OID-MIB::hpnicfevtModuleRT-SIC-3G-GSM-H3,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.3.1.9.3.292,HPN-ICF-ENTITY-VENDORTYPE-OID-MIB::hpnicfevtModuleRT-msp2p-OC12c,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.3.1.9.3.293,HPN-ICF-ENTITY-VENDORTYPE-OID-MIB::hpnicfevtModuleRt-msp4p-OC12c,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.3.1.9.3.294,HPN-ICF-ENTITY-VENDORTYPE-OID-MIB::hpnicfevtModuleRt-al1p,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.3.1.9.3.295,HPN-ICF-ENTITY-VENDORTYPE-OID-MIB::hpnicfevtModuleRt-OAP-100,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.3.1.9.3.296,HPN-ICF-ENTITY-VENDORTYPE-OID-MIB::hpnicfevtModuleRt-FIP-110,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.3.1.9.3.297,HPN-ICF-ENTITY-VENDORTYPE-OID-MIB::hpnicfevtModuleRt-OSM-SSM,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.3.1.9.3.298,HPN-ICF-ENTITY-VENDORTYPE-OID-MIB::hpnicfevtModuleRt-OAP-SSM,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.3.1.9.3.299,HPN-ICF-ENTITY-VENDORTYPE-OID-MIB::hpnicfevtModuleRt-rs2p,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.3.1.9.3.300,HPN-ICF-ENTITY-VENDORTYPE-OID-MIB::hpnicfevtModuleRt-SAP-48GBE,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.3.1.9.3.301,HPN-ICF-ENTITY-VENDORTYPE-OID-MIB::hpnicfevtModuleRt-SAP-48GBP,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.3.1.9.3.302,HPN-ICF-ENTITY-VENDORTYPE-OID-MIB::hpnicfevtModuleRt-SAP-24GBP,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.3.1.9.3.303,HPN-ICF-ENTITY-VENDORTYPE-OID-MIB::hpnicfevtModuleRt-SPE-SSL,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.3.1.9.3.304,HPN-ICF-ENTITY-VENDORTYPE-OID-MIB::hpnicfevtModuleRt-SIC-AUDIO,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.3.1.9.3.305,HPN-ICF-ENTITY-VENDORTYPE-OID-MIB::hpnicfevtModuleRt-FIC-1E1POS-H3,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.3.1.9.3.306,HPN-ICF-ENTITY-VENDORTYPE-OID-MIB::hpnicfevtModuleRt-DSIC-4FXS1FXO,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.3.1.9.3.307,HPN-ICF-ENTITY-VENDORTYPE-OID-MIB::hpnicfevtModuleRt-FIC-CPOS,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.3.1.9.3.308,HPN-ICF-ENTITY-VENDORTYPE-OID-MIB::hpnicfevtModuleRt-DSIC-1SHDSL-8W,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.3.1.9.3.309,HPN-ICF-ENTITY-VENDORTYPE-OID-MIB::hpnicfevtModuleRt-SIC-3G-TD,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.3.1.9.3.310,HPN-ICF-ENTITY-VENDORTYPE-OID-MIB::hpnicfevtModuleRt-SIC-3G-CDMA,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.3.1.9.3.311,HPN-ICF-ENTITY-VENDORTYPE-OID-MIB::hpnicfevtModuleRt-SIC-3G-HSPA,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.3.1.9.3.312,HPN-ICF-ENTITY-VENDORTYPE-OID-MIB::hpnicfevtModuleRt-FIC-OAP-V2,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.3.1.9.3.313,HPN-ICF-ENTITY-VENDORTYPE-OID-MIB::hpnicfevtModuleRt-MIM-OAP-V2,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.3.1.9.3.314,HPN-ICF-ENTITY-VENDORTYPE-OID-MIB::hpnicfevtModuleRt-MIM-OAPS-V2,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.3.1.9.3.315,HPN-ICF-ENTITY-VENDORTYPE-OID-MIB::hpnicfevtModuleRt-HMIM-1CT3,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.3.1.9.3.316,HPN-ICF-ENTITY-VENDORTYPE-OID-MIB::hpnicfevtModuleRt-HMIM-1CE3,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.3.1.9.3.317,HPN-ICF-ENTITY-VENDORTYPE-OID-MIB::hpnicfevtModuleRt-HMIM-1POS,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.3.1.9.3.318,HPN-ICF-ENTITY-VENDORTYPE-OID-MIB::hpnicfevtModuleRt-HMIM-2SAE,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.3.1.9.3.319,HPN-ICF-ENTITY-VENDORTYPE-OID-MIB::hpnicfevtModuleRt-HMIM-4SAE,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.3.1.9.3.320,HPN-ICF-ENTITY-VENDORTYPE-OID-MIB::hpnicfevtModuleRt-HMIM-8SAE,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.3.1.9.3.321,HPN-ICF-ENTITY-VENDORTYPE-OID-MIB::hpnicfevtModuleRt-HMIM-8ASE,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.3.1.9.3.322,HPN-ICF-ENTITY-VENDORTYPE-OID-MIB::hpnicfevtModuleRt-HMIM-16ASE,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.3.1.9.3.323,HPN-ICF-ENTITY-VENDORTYPE-OID-MIB::hpnicfevtModuleRt-HMIM-1E1,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.3.1.9.3.324,HPN-ICF-ENTITY-VENDORTYPE-OID-MIB::hpnicfevtModuleRt-HMIM-2E1,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.3.1.9.3.325,HPN-ICF-ENTITY-VENDORTYPE-OID-MIB::hpnicfevtModuleRt-HMIM-4E1,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.3.1.9.3.326,HPN-ICF-ENTITY-VENDORTYPE-OID-MIB::hpnicfevtModuleRt-HMIM-8E1-75,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.3.1.9.3.327,HPN-ICF-ENTITY-VENDORTYPE-OID-MIB::hpnicfevtModuleRt-HMIM-1E1-F,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.3.1.9.3.328,HPN-ICF-ENTITY-VENDORTYPE-OID-MIB::hpnicfevtModuleRt-HMIM-2E1-F,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.3.1.9.3.329,HPN-ICF-ENTITY-VENDORTYPE-OID-MIB::hpnicfevtModuleRt-HMIM-4E1-F,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.3.1.9.3.330,HPN-ICF-ENTITY-VENDORTYPE-OID-MIB::hpnicfevtModuleRt-HMIM-8E1-F-75,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.3.1.9.3.331,HPN-ICF-ENTITY-VENDORTYPE-OID-MIB::hpnicfevtModuleRt-HMIM-6AM,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.3.1.9.3.332,HPN-ICF-ENTITY-VENDORTYPE-OID-MIB::hpnicfevtModuleRt-HMIM-6FCM,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.3.1.9.3.333,HPN-ICF-ENTITY-VENDORTYPE-OID-MIB::hpnicfevtModuleRt-HMIM-2T1,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.3.1.9.3.334,HPN-ICF-ENTITY-VENDORTYPE-OID-MIB::hpnicfevtModuleRt-HMIM-4T1-F,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.3.1.9.3.335,HPN-ICF-ENTITY-VENDORTYPE-OID-MIB::hpnicfevtModuleRt-HMIM-8T1,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.3.1.9.3.336,HPN-ICF-ENTITY-VENDORTYPE-OID-MIB::hpnicfevtModuleRt-HMIM-8T1-F,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.3.1.9.3.337,HPN-ICF-ENTITY-VENDORTYPE-OID-MIB::hpnicfevtModuleRt-HMIM-1VE1,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.3.1.9.3.338,HPN-ICF-ENTITY-VENDORTYPE-OID-MIB::hpnicfevtModuleRt-HMIM-1VT1,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.3.1.9.3.339,HPN-ICF-ENTITY-VENDORTYPE-OID-MIB::hpnicfevtModuleRt-HMIM-2VE1,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.3.1.9.3.340,HPN-ICF-ENTITY-VENDORTYPE-OID-MIB::hpnicfevtModuleRt-HMIM-2VT1,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.3.1.9.3.341,HPN-ICF-ENTITY-VENDORTYPE-OID-MIB::hpnicfevtModuleRt-HMIM-8FXS8FXO,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.3.1.9.3.342,HPN-ICF-ENTITY-VENDORTYPE-OID-MIB::hpnicfevtModuleRt-HMIM-16FXS,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.3.1.9.3.343,HPN-ICF-ENTITY-VENDORTYPE-OID-MIB::hpnicfevtModuleRt-HMIM-4FXS,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.3.1.9.3.344,HPN-ICF-ENTITY-VENDORTYPE-OID-MIB::hpnicfevtModuleRt-HMIM-4FXO,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.3.1.9.3.345,HPN-ICF-ENTITY-VENDORTYPE-OID-MIB::hpnicfevtModuleRt-HMIM-4EM,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.3.1.9.3.346,HPN-ICF-ENTITY-VENDORTYPE-OID-MIB::hpnicfevtModuleRt-HMIM-4BSV,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.3.1.9.3.347,HPN-ICF-ENTITY-VENDORTYPE-OID-MIB::hpnicfevtModuleRt-SIC-CNDE,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.3.1.9.3.348,HPN-ICF-ENTITY-VENDORTYPE-OID-MIB::hpnicfevtModuleRt-ESM-CNDE,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.3.1.9.3.349,HPN-ICF-ENTITY-VENDORTYPE-OID-MIB::hpnicfevtModuleRt-ESM-CNDE-M,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.3.1.9.3.350,HPN-ICF-ENTITY-VENDORTYPE-OID-MIB::hpnicfevtModuleRt-SR6602-X1,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.3.1.9.3.351,HPN-ICF-ENTITY-VENDORTYPE-OID-MIB::hpnicfevtModuleRt-SR6602-X2,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.3.1.9.3.352,HPN-ICF-ENTITY-VENDORTYPE-OID-MIB::hpnicfevtModuleRt-MCP-X1,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.3.1.9.3.353,HPN-ICF-ENTITY-VENDORTYPE-OID-MIB::hpnicfevtModuleRt-MCP-X2,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.3.1.9.3.354,HPN-ICF-ENTITY-VENDORTYPE-OID-MIB::hpnicfevtModuleRt-FIP-10,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.3.1.9.3.355,HPN-ICF-ENTITY-VENDORTYPE-OID-MIB::hpnicfevtModuleRt-FIP-20,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.3.1.9.3.356,HPN-ICF-ENTITY-VENDORTYPE-OID-MIB::hpnicfevtModuleRt-RSE-X2,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.3.1.9.3.357,HPN-ICF-ENTITY-VENDORTYPE-OID-MIB::hpnicfevtModuleRt-FIP-600,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.3.1.9.3.358,HPN-ICF-ENTITY-VENDORTYPE-OID-MIB::hpnicfevtModuleRt-SAP-4EXP,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.3.1.9.3.359,HPN-ICF-ENTITY-VENDORTYPE-OID-MIB::hpnicfevtModuleRt-SFE-X1,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.3.1.9.3.360,HPN-ICF-ENTITY-VENDORTYPE-OID-MIB::hpnicfevtModuleRt-SFE-A1,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.3.1.9.3.361,HPN-ICF-ENTITY-VENDORTYPE-OID-MIB::hpnicfevtModuleRt-HMIM-24GSW,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.3.1.9.3.362,HPN-ICF-ENTITY-VENDORTYPE-OID-MIB::hpnicfevtModuleRt-HMIM-24GSWP,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.3.1.9.3.363,HPN-ICF-ENTITY-VENDORTYPE-OID-MIB::hpnicfevtModuleRt-MPU100,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.3.1.9.3.364,HPN-ICF-ENTITY-VENDORTYPE-OID-MIB::hpnicfevtModuleRt-SPU100,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.3.1.9.3.365,HPN-ICF-ENTITY-VENDORTYPE-OID-MIB::hpnicfevtModuleRt-SPU200,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.3.1.9.3.366,HPN-ICF-ENTITY-VENDORTYPE-OID-MIB::hpnicfevtModuleRt-WLAN-N-1RADIO,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.3.1.9.3.367,HPN-ICF-ENTITY-VENDORTYPE-OID-MIB::hpnicfevtModuleRt-3G-CDMA,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.3.1.9.3.368,HPN-ICF-ENTITY-VENDORTYPE-OID-MIB::hpnicfevtModuleRt-3G-WCDMA,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.3.1.9.3.369,HPN-ICF-ENTITY-VENDORTYPE-OID-MIB::hpnicfevtModuleRt-3G-HSPAPLUS,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.3.1.9.3.370,HPN-ICF-ENTITY-VENDORTYPE-OID-MIB::hpnicfevtModuleRt-VPM-128,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.3.1.9.3.371,HPN-ICF-ENTITY-VENDORTYPE-OID-MIB::hpnicfevtModuleRt-VPM-256,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.3.1.9.3.372,HPN-ICF-ENTITY-VENDORTYPE-OID-MIB::hpnicfevtModuleRt-VPM-512,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.3.1.9.3.373,HPN-ICF-ENTITY-VENDORTYPE-OID-MIB::hpnicfevtModuleRt-HMIM-8GEE,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.3.1.9.3.374,HPN-ICF-ENTITY-VENDORTYPE-OID-MIB::hpnicfevtModuleRt-HMIM-4GEE,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.3.1.9.3.375,HPN-ICF-ENTITY-VENDORTYPE-OID-MIB::hpnicfevtModuleRt-HMIM-2GEE,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.3.1.9.3.376,HPN-ICF-ENTITY-VENDORTYPE-OID-MIB::hpnicfevtModuleRt-HMIM-8GEF,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.3.1.9.3.377,HPN-ICF-ENTITY-VENDORTYPE-OID-MIB::hpnicfevtModuleRt-HMIM-4GEF,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.3.1.9.3.378,HPN-ICF-ENTITY-VENDORTYPE-OID-MIB::hpnicfevtModuleRt-HMIM-2GEF,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.3.1.9.3.379,HPN-ICF-ENTITY-VENDORTYPE-OID-MIB::hpnicfevtModuleRt-SPU300,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.3.1.9.3.380,HPN-ICF-ENTITY-VENDORTYPE-OID-MIB::hpnicfevtModuleRt-HMIM-1CPOS,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.3.1.9.3.381,HPN-ICF-ENTITY-VENDORTYPE-OID-MIB::hpnicfevtModuleRt-HMIM-2CPOS,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.3.1.9.3.382,HPN-ICF-ENTITY-VENDORTYPE-OID-MIB::hpnicfevtModuleRt-SPU100-5080,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.3.1.9.3.383,HPN-ICF-ENTITY-VENDORTYPE-OID-MIB::hpnicfevtModuleRt-SPU200-5080,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.3.1.9.3.384,HPN-ICF-ENTITY-VENDORTYPE-OID-MIB::hpnicfevtModuleRt-SPU300-5080,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.3.1.9.3.385,HPN-ICF-ENTITY-VENDORTYPE-OID-MIB::hpnicfevtModuleRt-4G-LTE-Verizon,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.3.1.9.3.386,HPN-ICF-ENTITY-VENDORTYPE-OID-MIB::hpnicfevtModuleRt-4G-LTE-Global,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.3.1.9.3.387,HPN-ICF-ENTITY-VENDORTYPE-OID-MIB::hpnicfevtModuleRt-HMIM-1ATM-OC3,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.3.1.9.3.388,HPN-ICF-ENTITY-VENDORTYPE-OID-MIB::hpnicfevtModuleRt-SIC-1E1-V2,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.3.1.9.3.389,HPN-ICF-ENTITY-VENDORTYPE-OID-MIB::hpnicfevtModuleRt-FIP-300,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.3.1.9.3.390,HPN-ICF-ENTITY-VENDORTYPE-OID-MIB::hpnicfevtModuleRt-FIP-310,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.3.1.9.3.391,HPN-ICF-ENTITY-VENDORTYPE-OID-MIB::hpnicfevtModuleRt-TS8P,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.3.1.9.3.392,HPN-ICF-ENTITY-VENDORTYPE-OID-MIB::hpnicfevtModuleRt-4G4P,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.3.1.9.3.393,HPN-ICF-ENTITY-VENDORTYPE-OID-MIB::hpnicfevtModuleRt-SIC-4G-LTE-V,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.3.1.9.3.394,HPN-ICF-ENTITY-VENDORTYPE-OID-MIB::hpnicfevtModuleRt-SIC-4G-LTE-A,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.3.1.9.3.395,HPN-ICF-ENTITY-VENDORTYPE-OID-MIB::hpnicfevtModuleRt-SIC-4G-LTE-G,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.3.1.9.3.396,HPN-ICF-ENTITY-VENDORTYPE-OID-MIB::hpnicfevtModuleRt-SIC-2SAE,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.3.1.9.3.397,HPN-ICF-ENTITY-VENDORTYPE-OID-MIB::hpnicfevtModuleRt-SIC-4SAE,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.3.1.9.3.398,HPN-ICF-ENTITY-VENDORTYPE-OID-MIB::hpnicfevtModuleRt-HMIM-OAP,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.3.1.9.3.399,HPN-ICF-ENTITY-VENDORTYPE-OID-MIB::hpnicfevtModuleRt-HMIM-8GSW,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.3.1.9.3.400,HPN-ICF-ENTITY-VENDORTYPE-OID-MIB::hpnicfevtModuleRt-IPU,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.3.1.9.3.401,HPN-ICF-ENTITY-VENDORTYPE-OID-MIB::hpnicfevtModuleRt-MIM2GEBE-PCIE,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.3.1.9.3.402,HPN-ICF-ENTITY-VENDORTYPE-OID-MIB::hpnicfevtModuleRt-HIM12GE-PCIE,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.3.1.9.3.403,HPN-ICF-ENTITY-VENDORTYPE-OID-MIB::hpnicfevtModuleRt-HIM2XGE-PCIE,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.3.1.9.3.404,HPN-ICF-ENTITY-VENDORTYPE-OID-MIB::hpnicfevtModuleRt-IPU-T1000-M,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.3.1.9.3.405,HPN-ICF-ENTITY-VENDORTYPE-OID-MIB::hpnicfevtModuleRt-IPU-GX4C,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.3.1.9.3.406,HPN-ICF-ENTITY-VENDORTYPE-OID-MIB::hpnicfevtModuleRt-IPU-GT4C,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.3.1.9.3.407,HPN-ICF-ENTITY-VENDORTYPE-OID-MIB::hpnicfevtModuleRt-RPU-IAG2000-A,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.3.1.9.3.408,HPN-ICF-ENTITY-VENDORTYPE-OID-MIB::hpnicfevtModuleRt-RPU-AFD1000-A,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.3.1.9.3.409,HPN-ICF-ENTITY-VENDORTYPE-OID-MIB::hpnicfevtModuleRt-RPU-F5000-A,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.3.1.9.3.410,HPN-ICF-ENTITY-VENDORTYPE-OID-MIB::hpnicfevtModuleRt-ACG-8800S3-MPU,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.3.1.9.3.411,HPN-ICF-ENTITY-VENDORTYPE-OID-MIB::hpnicfevtModuleRt-T5000S3-MPU,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.3.1.9.3.412,HPN-ICF-ENTITY-VENDORTYPE-OID-MIB::hpnicfevtModuleRt-NS21S2MSPB0,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.3.1.9.3.413,HPN-ICF-ENTITY-VENDORTYPE-OID-MIB::hpnicfevtModuleRt-NS11S2MSPB0,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.3.1.9.3.414,HPN-ICF-ENTITY-VENDORTYPE-OID-MIB::hpnicfevtModuleRt-NSQ1WLAN,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.3.1.9.3.415,HPN-ICF-ENTITY-VENDORTYPE-OID-MIB::hpnicfevtModuleRt-NSQ1GP4U0,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.3.1.9.3.416,HPN-ICF-ENTITY-VENDORTYPE-OID-MIB::hpnicfevtModuleRt-NSQ1GP8C40,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.3.1.9.3.417,HPN-ICF-ENTITY-VENDORTYPE-OID-MIB::hpnicfevtModuleRt-NSQ1XS2U0,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.3.1.9.3.418,HPN-ICF-ENTITY-VENDORTYPE-OID-MIB::hpnicfevtModuleRt-NSQ1G24XS60,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.3.1.9.3.419,HPN-ICF-ENTITY-VENDORTYPE-OID-MIB::hpnicfevtModuleRt-NSQ1TGX4EA0,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.3.1.9.3.420,HPN-ICF-ENTITY-VENDORTYPE-OID-MIB::hpnicfevtModuleRt-NSQ1FAB08D0,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.3.1.9.3.421,HPN-ICF-ENTITY-VENDORTYPE-OID-MIB::hpnicfevtModuleRt-NSQ1TGS32SF0,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.3.1.9.3.422,HPN-ICF-ENTITY-VENDORTYPE-OID-MIB::hpnicfevtModuleRt-NSQ1QGS4SF0,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.3.1.9.3.423,HPN-ICF-ENTITY-VENDORTYPE-OID-MIB::hpnicfevtModuleRt-NSQ1GP24TXEA0,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.3.1.9.3.424,HPN-ICF-ENTITY-VENDORTYPE-OID-MIB::hpnicfevtModuleRt-NSQ1GP48EB0,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.3.1.9.3.425,HPN-ICF-ENTITY-VENDORTYPE-OID-MIB::hpnicfevtModuleRt-NSQ1FWCEA0,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.3.1.9.3.426,HPN-ICF-ENTITY-VENDORTYPE-OID-MIB::hpnicfevtModuleRt-NSQ1GT48EA0,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.3.1.9.3.427,HPN-ICF-ENTITY-VENDORTYPE-OID-MIB::hpnicfevtModuleRt-NSQ1TGS8EA0,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.3.1.9.3.428,HPN-ICF-ENTITY-VENDORTYPE-OID-MIB::hpnicfevtModuleRt-NSQ1FAB04B0,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.3.1.9.3.429,HPN-ICF-ENTITY-VENDORTYPE-OID-MIB::hpnicfevtModuleRt-NSQ1FAB12D0,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.3.1.9.3.430,HPN-ICF-ENTITY-VENDORTYPE-OID-MIB::hpnicfevtModuleRt-NSQ1SUPB0,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.3.1.9.3.431,HPN-ICF-ENTITY-VENDORTYPE-OID-MIB::hpnicfevtModuleRt-VFW1000,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.3.1.9.3.432,HPN-ICF-ENTITY-VENDORTYPE-OID-MIB::hpnicfevtModuleRt-NSQ1CGC2SE0,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.3.1.9.3.433,HPN-ICF-ENTITY-VENDORTYPE-OID-MIB::hpnicfevtModuleRt-VLB1000,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.3.1.9.3.600,HPN-ICF-ENTITY-VENDORTYPE-OID-MIB::hpnicfevtModuleRt-VG-8fxs,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.3.1.9.3.601,HPN-ICF-ENTITY-VENDORTYPE-OID-MIB::hpnicfevtModuleRt-VG-24fxs,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.3.1.9.3.602,HPN-ICF-ENTITY-VENDORTYPE-OID-MIB::hpnicfevtModuleRt-VG-24fxs24fxo,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.3.1.9.3.603,HPN-ICF-ENTITY-VENDORTYPE-OID-MIB::hpnicfevtModuleRt-VG-MPU,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.3.1.9.3.604,HPN-ICF-ENTITY-VENDORTYPE-OID-MIB::hpnicfevtModuleRt-MIM-VCX-CONNECT-P-3C,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.3.1.9.3.605,HPN-ICF-ENTITY-VENDORTYPE-OID-MIB::hpnicfevtModuleRt-MIM-VCX-CONNECT-S-3C,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.3.1.9.3.606,HPN-ICF-ENTITY-VENDORTYPE-OID-MIB::hpnicfevtModuleRt-MIM-VCX-3C,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.3.1.9.3.607,HPN-ICF-ENTITY-VENDORTYPE-OID-MIB::hpnicfevtModuleRt-VNIC-VMXNET3,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.3.1.9.3.608,HPN-ICF-ENTITY-VENDORTYPE-OID-MIB::hpnicfevtModuleRt-VNIC-E1000,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.3.1.9.3.609,HPN-ICF-ENTITY-VENDORTYPE-OID-MIB::hpnicfevtModuleRt-VNIC-VIRTIO,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.3.1.9.3.610,HPN-ICF-ENTITY-VENDORTYPE-OID-MIB::hpnicfevtModuleRt-VNIC-RTL8139,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.3.1.9.3.611,HPN-ICF-ENTITY-VENDORTYPE-OID-MIB::hpnicfevtModuleRt-VNIC-IXGBEVF,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.3.1.9.3.800,HPN-ICF-ENTITY-VENDORTYPE-OID-MIB::hpnicfevtModuleRt-SIC-4GSW,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.3.1.9.3.801,HPN-ICF-ENTITY-VENDORTYPE-OID-MIB::hpnicfevtModuleRt-SIC-4GSWP,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.3.1.9.3.802,HPN-ICF-ENTITY-VENDORTYPE-OID-MIB::hpnicfevtModuleRt-SIC-1GEC-V2,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.3.1.9.3.803,HPN-ICF-ENTITY-VENDORTYPE-OID-MIB::hpnicfevtModuleRt-4G-LTE-ATT,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.3.1.9.3.804,HPN-ICF-ENTITY-VENDORTYPE-OID-MIB::hpnicfevtModuleRt-4G-TD-LTE,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.3.1.9.3.805,HPN-ICF-ENTITY-VENDORTYPE-OID-MIB::hpnicfevtModuleRt-FIP-240,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.3.1.9.3.806,HPN-ICF-ENTITY-VENDORTYPE-OID-MIB::hpnicfevtModuleRt-8GBP-V2,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.3.1.9.3.807,HPN-ICF-ENTITY-VENDORTYPE-OID-MIB::hpnicfevtModuleRt-HMIM-CNDE,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.3.1.9.3.808,HPN-ICF-ENTITY-VENDORTYPE-OID-MIB::hpnicfevtModuleRt-4G-LTE-Mobile,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.3.1.9.3.809,HPN-ICF-ENTITY-VENDORTYPE-OID-MIB::hpnicfevtModuleRt-SIC-4G-LTE-M,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.3.1.9.3.810,HPN-ICF-ENTITY-VENDORTYPE-OID-MIB::hpnicfevtModuleRt-CRSE-X3,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.3.1.9.3.811,HPN-ICF-ENTITY-VENDORTYPE-OID-MIB::hpnicfevtModuleRt-CFIP-300,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.3.1.9.3.812,HPN-ICF-ENTITY-VENDORTYPE-OID-MIB::hpnicfevtModuleRt-CFIP-310,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.3.1.9.3.813,HPN-ICF-ENTITY-VENDORTYPE-OID-MIB::hpnicfevtModuleRt-CSAP-4EXP,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.3.1.9.3.814,HPN-ICF-ENTITY-VENDORTYPE-OID-MIB::hpnicfevtModuleRt-RSU,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.3.1.9.3.815,HPN-ICF-ENTITY-VENDORTYPE-OID-MIB::hpnicfevtModuleRt-CFIP-610,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.3.1.9.3.816,HPN-ICF-ENTITY-VENDORTYPE-OID-MIB::hpnicfevtModuleRt-2EXP,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.3.1.9.3.817,HPN-ICF-ENTITY-VENDORTYPE-OID-MIB::hpnicfevtModuleRt-16GBP,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.3.1.9.3.818,HPN-ICF-ENTITY-VENDORTYPE-OID-MIB::hpnicfevtModuleRt-CFIP-240,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.3.1.9.3.819,HPN-ICF-ENTITY-VENDORTYPE-OID-MIB::hpnicfevtModuleRt-RSE-X3,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.3.1.9.3.820,HPN-ICF-ENTITY-VENDORTYPE-OID-MIB::hpnicfevtModuleRt-SAP-8EXP,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.3.1.9.3.821,HPN-ICF-ENTITY-VENDORTYPE-OID-MIB::hpnicfevtModuleRt-SAP-16EXP,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.3.1.9.3.822,HPN-ICF-ENTITY-VENDORTYPE-OID-MIB::hpnicfevtModuleRt-PU1P,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.3.1.9.3.823,HPN-ICF-ENTITY-VENDORTYPE-OID-MIB::hpnicfevtModuleRt-RSU100,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.3.1.9.3.824,HPN-ICF-ENTITY-VENDORTYPE-OID-MIB::hpnicfevtModuleRt-SAP-2QGP,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.3.1.9.3.825,HPN-ICF-ENTITY-VENDORTYPE-OID-MIB::hpnicfevtModuleRt-CSFE-X1,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.3.1.9.3.5000,HPN-ICF-ENTITY-VENDORTYPE-OID-MIB::hpevtModuleRt-SIC-EPRI,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.3.1.9.3.5001,HPN-ICF-ENTITY-VENDORTYPE-OID-MIB::hpevtModuleRt-MIM-1E1-V2,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.3.1.9.3.5002,HPN-ICF-ENTITY-VENDORTYPE-OID-MIB::hpevtModuleRt-MIM-1E1-F-V2,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.3.1.9.3.5003,HPN-ICF-ENTITY-VENDORTYPE-OID-MIB::hpevtModuleRt-MIM-2E1-F-V2,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.3.1.9.3.5004,HPN-ICF-ENTITY-VENDORTYPE-OID-MIB::hpevtModuleRt-MIM-4E1-F-V2,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.3.1.9.3.5005,HPN-ICF-ENTITY-VENDORTYPE-OID-MIB::hpevtModuleRt-MIM-8E1-75,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.3.1.9.3.5006,HPN-ICF-ENTITY-VENDORTYPE-OID-MIB::hpevtModuleRt-MIM-8E1-75-F,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.3.1.9.3.5007,HPN-ICF-ENTITY-VENDORTYPE-OID-MIB::hpevtModuleRt-MIM-8T1,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.3.1.9.3.5008,HPN-ICF-ENTITY-VENDORTYPE-OID-MIB::hpevtModuleRt-MIM-8T1-F,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.3.1.9.3.5009,HPN-ICF-ENTITY-VENDORTYPE-OID-MIB::hpevtModuleRt-MIM-IMA-8E1-75,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.3.1.9.3.5010,HPN-ICF-ENTITY-VENDORTYPE-OID-MIB::hpevtModuleRt-FIC-2E1-V3,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.3.1.9.3.5011,HPN-ICF-ENTITY-VENDORTYPE-OID-MIB::hpevtModuleRt-FIC-IMA-8T1-V2,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.3.1.9.4,HPN-ICF-ENTITY-VENDORTYPE-OID-MIB::hpnicfevtModuleSwitchType,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.3.1.9.4.1,HPN-ICF-ENTITY-VENDORTYPE-OID-MIB::hpnicfevtModuleSw-10OR100M,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.3.1.9.4.2,HPN-ICF-ENTITY-VENDORTYPE-OID-MIB::hpnicfevtModuleSw-1000BASE-LX-SM,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.3.1.9.4.3,HPN-ICF-ENTITY-VENDORTYPE-OID-MIB::hpnicfevtModuleSw-1000BASE-SX-MM,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.3.1.9.4.4,HPN-ICF-ENTITY-VENDORTYPE-OID-MIB::hpnicfevtModuleSw-1000BASE-TX,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.3.1.9.4.5,HPN-ICF-ENTITY-VENDORTYPE-OID-MIB::hpnicfevtModuleSw-100M-SINGLEMODE-FX,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.3.1.9.4.6,HPN-ICF-ENTITY-VENDORTYPE-OID-MIB::hpnicfevtModuleSw-100M-MULTIMODE-FX,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.3.1.9.4.7,HPN-ICF-ENTITY-VENDORTYPE-OID-MIB::hpnicfevtModuleSw-100M-100BASE-TX,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.3.1.9.4.8,HPN-ICF-ENTITY-VENDORTYPE-OID-MIB::hpnicfevtModuleSw-100M-HUB,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.3.1.9.4.9,HPN-ICF-ENTITY-VENDORTYPE-OID-MIB::hpnicfevtModuleSw-VDSL,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.3.1.9.4.10,HPN-ICF-ENTITY-VENDORTYPE-OID-MIB::hpnicfevtModuleSw-STACK,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.3.1.9.4.11,HPN-ICF-ENTITY-VENDORTYPE-OID-MIB::hpnicfevtModuleSw-1000BASE-ZENITH-FX,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.3.1.9.4.12,HPN-ICF-ENTITY-VENDORTYPE-OID-MIB::hpnicfevtModuleSw-1000BASE-LONG-FX,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.3.1.9.4.13,HPN-ICF-ENTITY-VENDORTYPE-OID-MIB::hpnicfevtModuleSw-ADSL,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.3.1.9.4.14,HPN-ICF-ENTITY-VENDORTYPE-OID-MIB::hpnicfevtModuleSw-4T10OR100-4FX100SM,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.3.1.9.4.15,HPN-ICF-ENTITY-VENDORTYPE-OID-MIB::hpnicfevtModuleSw-4T10OR100-4FX100MM,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.3.1.9.4.16,HPN-ICF-ENTITY-VENDORTYPE-OID-MIB::hpnicfevtModuleSw-VSPL,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.3.1.9.4.17,HPN-ICF-ENTITY-VENDORTYPE-OID-MIB::hpnicfevtModuleSw-ASPL,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.3.1.9.4.18,HPN-ICF-ENTITY-VENDORTYPE-OID-MIB::hpnicfevtModuleSw-1000M-SFP,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.3.1.9.4.19,HPN-ICF-ENTITY-VENDORTYPE-OID-MIB::hpnicfevtModuleSw-LS82O2CM,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.3.1.9.4.20,HPN-ICF-ENTITY-VENDORTYPE-OID-MIB::hpnicfevtModuleSw-LS82P2CM,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.3.1.9.4.21,HPN-ICF-ENTITY-VENDORTYPE-OID-MIB::hpnicfevtModuleSw-LS82O4GM,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.3.1.9.4.22,HPN-ICF-ENTITY-VENDORTYPE-OID-MIB::hpnicfevtModuleSw-LS82GB4C,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.3.1.9.4.23,HPN-ICF-ENTITY-VENDORTYPE-OID-MIB::hpnicfevtModuleSw-LS82GT4C,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.3.1.9.4.24,HPN-ICF-ENTITY-VENDORTYPE-OID-MIB::hpnicfevtModuleSw-LS82ST4C,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.3.1.9.4.25,HPN-ICF-ENTITY-VENDORTYPE-OID-MIB::hpnicfevtModuleSw-BOARD-LS82DSPU,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.3.1.9.4.26,HPN-ICF-ENTITY-VENDORTYPE-OID-MIB::hpnicfevtModuleSw-BOARD-LS81GP8U,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.3.1.9.4.27,HPN-ICF-ENTITY-VENDORTYPE-OID-MIB::hpnicfevtModuleSw-BOARD-LS82GT20,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.3.1.9.4.28,HPN-ICF-ENTITY-VENDORTYPE-OID-MIB::hpnicfevtModuleSw-BOARD-LS82FE48,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.3.1.9.4.29,HPN-ICF-ENTITY-VENDORTYPE-OID-MIB::hpnicfevtModuleSw-LS82T24B,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.3.1.9.4.30,HPN-ICF-ENTITY-VENDORTYPE-OID-MIB::hpnicfevtModuleSw-LSB1SRPA,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.3.1.9.4.31,HPN-ICF-ENTITY-VENDORTYPE-OID-MIB::hpnicfevtModuleSw-LSB1FT48A,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.3.1.9.4.32,HPN-ICF-ENTITY-VENDORTYPE-OID-MIB::hpnicfevtModuleSw-LSB1FT48B,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.3.1.9.4.33,HPN-ICF-ENTITY-VENDORTYPE-OID-MIB::hpnicfevtModuleSw-LSB1F48GA,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.3.1.9.4.34,HPN-ICF-ENTITY-VENDORTYPE-OID-MIB::hpnicfevtModuleSw-LSB1F48GB,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.3.1.9.4.35,HPN-ICF-ENTITY-VENDORTYPE-OID-MIB::hpnicfevtModuleSw-LSB1FP20A,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.3.1.9.4.36,HPN-ICF-ENTITY-VENDORTYPE-OID-MIB::hpnicfevtModuleSw-LSB1FP20B,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.3.1.9.4.37,HPN-ICF-ENTITY-VENDORTYPE-OID-MIB::hpnicfevtModuleSw-FT48A,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.3.1.9.4.38,HPN-ICF-ENTITY-VENDORTYPE-OID-MIB::hpnicfevtModuleSw-GP4U,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.3.1.9.4.39,HPN-ICF-ENTITY-VENDORTYPE-OID-MIB::hpnicfevtModuleSw-GP2U,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.3.1.9.4.40,HPN-ICF-ENTITY-VENDORTYPE-OID-MIB::hpnicfevtModuleSw-TGX1A,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.3.1.9.4.41,HPN-ICF-ENTITY-VENDORTYPE-OID-MIB::hpnicfevtModuleSw-1000BASE-LX-SM-IR-SC,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.3.1.9.4.42,HPN-ICF-ENTITY-VENDORTYPE-OID-MIB::hpnicfevtModuleSw-1000BASE-SX-MM-SR-SC,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.3.1.9.4.43,HPN-ICF-ENTITY-VENDORTYPE-OID-MIB::hpnicfevtModuleSw-1000BASE-T-RJ45,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.3.1.9.4.44,HPN-ICF-ENTITY-VENDORTYPE-OID-MIB::hpnicfevtModuleSw-100BASE-FX-SM-IR-SC,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.3.1.9.4.45,HPN-ICF-ENTITY-VENDORTYPE-OID-MIB::hpnicfevtModuleSw-100BASE-FX-MM-SR-SC,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.3.1.9.4.46,HPN-ICF-ENTITY-VENDORTYPE-OID-MIB::hpnicfevtModuleSw-GIGA-STACK-1M-PC,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.3.1.9.4.47,HPN-ICF-ENTITY-VENDORTYPE-OID-MIB::hpnicfevtModuleSw-1000BASE-LX-SM-VLR-LC,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.3.1.9.4.48,HPN-ICF-ENTITY-VENDORTYPE-OID-MIB::hpnicfevtModuleSw-1000BASE-LX-SM-LR-LC,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.3.1.9.4.49,HPN-ICF-ENTITY-VENDORTYPE-OID-MIB::hpnicfevtModuleSw-100BASE-FX-SM-LR-SC,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.3.1.9.4.50,HPN-ICF-ENTITY-VENDORTYPE-OID-MIB::hpnicfevtModuleSw-1000BASE-X-GBIC,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.3.1.9.4.51,HPN-ICF-ENTITY-VENDORTYPE-OID-MIB::hpnicfevtModuleSw-100M-SINGLEMODE-FX-LC,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.3.1.9.4.52,HPN-ICF-ENTITY-VENDORTYPE-OID-MIB::hpnicfevtModuleSw-100M-MULTIMODE-FX-LC,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.3.1.9.4.53,HPN-ICF-ENTITY-VENDORTYPE-OID-MIB::hpnicfevtModuleSw-1000BASE-4SFP,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.3.1.9.4.54,HPN-ICF-ENTITY-VENDORTYPE-OID-MIB::hpnicfevtModuleSw-1000BASE-4GBIC,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.3.1.9.4.55,HPN-ICF-ENTITY-VENDORTYPE-OID-MIB::hpnicfevtModuleSw-1000BASE-FIXED-4SFP,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.3.1.9.4.56,HPN-ICF-ENTITY-VENDORTYPE-OID-MIB::hpnicfevtModuleSw-1000BASE-FIXED-4GBIC,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.3.1.9.4.57,HPN-ICF-ENTITY-VENDORTYPE-OID-MIB::hpnicfevtModuleSw-LSB1GP12A,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.3.1.9.4.58,HPN-ICF-ENTITY-VENDORTYPE-OID-MIB::hpnicfevtModuleSw-LSB1GP12B,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.3.1.9.4.59,HPN-ICF-ENTITY-VENDORTYPE-OID-MIB::hpnicfevtModuleSw-LSB1TGX1A,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.3.1.9.4.60,HPN-ICF-ENTITY-VENDORTYPE-OID-MIB::hpnicfevtModuleSw-LSB1TGX1B,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.3.1.9.4.61,HPN-ICF-ENTITY-VENDORTYPE-OID-MIB::hpnicfevtModuleSw-LSB1P4G8A,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.3.1.9.4.62,HPN-ICF-ENTITY-VENDORTYPE-OID-MIB::hpnicfevtModuleSw-LSB1P4G8B,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.3.1.9.4.63,HPN-ICF-ENTITY-VENDORTYPE-OID-MIB::hpnicfevtModuleSw-LSB1A4G8A,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.3.1.9.4.64,HPN-ICF-ENTITY-VENDORTYPE-OID-MIB::hpnicfevtModuleSw-LSB1A4G8B,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.3.1.9.4.65,HPN-ICF-ENTITY-VENDORTYPE-OID-MIB::hpnicfevtModuleSw-FT48C,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.3.1.9.4.66,HPN-ICF-ENTITY-VENDORTYPE-OID-MIB::hpnicfevtModuleSw-FP20,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.3.1.9.4.67,HPN-ICF-ENTITY-VENDORTYPE-OID-MIB::hpnicfevtModuleSw-BOARD-LS81FT48,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.3.1.9.4.68,HPN-ICF-ENTITY-VENDORTYPE-OID-MIB::hpnicfevtModuleSw-BOARD-LS81GB8U,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.3.1.9.4.69,HPN-ICF-ENTITY-VENDORTYPE-OID-MIB::hpnicfevtModuleSw-BOARD-LS81GT8U,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.3.1.9.4.70,HPN-ICF-ENTITY-VENDORTYPE-OID-MIB::hpnicfevtModuleSw-BOARD-LS81FS24,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.3.1.9.4.71,HPN-ICF-ENTITY-VENDORTYPE-OID-MIB::hpnicfevtModuleSw-BOARD-LS81FM24,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.3.1.9.4.72,HPN-ICF-ENTITY-VENDORTYPE-OID-MIB::hpnicfevtModuleSw-BOARD-LS82GP20,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.3.1.9.4.73,HPN-ICF-ENTITY-VENDORTYPE-OID-MIB::hpnicfevtModuleSw-LSB1SRPB,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.3.1.9.4.74,HPN-ICF-ENTITY-VENDORTYPE-OID-MIB::hpnicfevtModuleSw-LSB1F32GA,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.3.1.9.4.75,HPN-ICF-ENTITY-VENDORTYPE-OID-MIB::hpnicfevtModuleSw-LSB1F32GB,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.3.1.9.4.76,HPN-ICF-ENTITY-VENDORTYPE-OID-MIB::hpnicfevtModuleSw-LSB2FT48A,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.3.1.9.4.77,HPN-ICF-ENTITY-VENDORTYPE-OID-MIB::hpnicfevtModuleSw-LSB2FT48B,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.3.1.9.4.78,HPN-ICF-ENTITY-VENDORTYPE-OID-MIB::hpnicfevtModuleSw-LSB1GT12A,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.3.1.9.4.79,HPN-ICF-ENTITY-VENDORTYPE-OID-MIB::hpnicfevtModuleSw-LSB1GT12B,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.3.1.9.4.80,HPN-ICF-ENTITY-VENDORTYPE-OID-MIB::hpnicfevtModuleSw-PC4U,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.3.1.9.4.81,HPN-ICF-ENTITY-VENDORTYPE-OID-MIB::hpnicfevtModuleSw-FT32A,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.3.1.9.4.82,HPN-ICF-ENTITY-VENDORTYPE-OID-MIB::hpnicfevtModuleSw-GT4U,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.3.1.9.4.83,HPN-ICF-ENTITY-VENDORTYPE-OID-MIB::hpnicfevtModuleSw-BOARD-LS83FP20A,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.3.1.9.4.84,HPN-ICF-ENTITY-VENDORTYPE-OID-MIB::hpnicfevtModuleSw-BOARD-LS82HGMU,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.3.1.9.4.85,HPN-ICF-ENTITY-VENDORTYPE-OID-MIB::hpnicfevtModuleSw-LSB1GP8TB,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.3.1.9.4.86,HPN-ICF-ENTITY-VENDORTYPE-OID-MIB::hpnicfevtModuleSw-LSB1GP8TC,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.3.1.9.4.87,HPN-ICF-ENTITY-VENDORTYPE-OID-MIB::hpnicfevtModuleSw-LSB1GT8PB,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.3.1.9.4.88,HPN-ICF-ENTITY-VENDORTYPE-OID-MIB::hpnicfevtModuleSw-LSB1GT8PC,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.3.1.9.4.89,HPN-ICF-ENTITY-VENDORTYPE-OID-MIB::hpnicfevtModuleSw-LSB1FT48C,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.3.1.9.4.90,HPN-ICF-ENTITY-VENDORTYPE-OID-MIB::hpnicfevtModuleSw-LSB1FP20C,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.3.1.9.4.91,HPN-ICF-ENTITY-VENDORTYPE-OID-MIB::hpnicfevtModuleSw-LSB1F32GC,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.3.1.9.4.92,HPN-ICF-ENTITY-VENDORTYPE-OID-MIB::hpnicfevtModuleSw-LSB1GT12C,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.3.1.9.4.93,HPN-ICF-ENTITY-VENDORTYPE-OID-MIB::hpnicfevtModuleSw-LSB1GP12C,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.3.1.9.4.94,HPN-ICF-ENTITY-VENDORTYPE-OID-MIB::hpnicfevtModuleSw-LSB1P4G8C,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.3.1.9.4.95,HPN-ICF-ENTITY-VENDORTYPE-OID-MIB::hpnicfevtModuleSw-LSB1TGX1C,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.3.1.9.4.96,HPN-ICF-ENTITY-VENDORTYPE-OID-MIB::hpnicfevtModuleSw-LSB1GT24B,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.3.1.9.4.97,HPN-ICF-ENTITY-VENDORTYPE-OID-MIB::hpnicfevtModuleSw-LSB1GT24C,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.3.1.9.4.98,HPN-ICF-ENTITY-VENDORTYPE-OID-MIB::hpnicfevtModuleSw-LSB1GP24B,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.3.1.9.4.99,HPN-ICF-ENTITY-VENDORTYPE-OID-MIB::hpnicfevtModuleSw-LSB1GP24C,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.3.1.9.4.100,HPN-ICF-ENTITY-VENDORTYPE-OID-MIB::hpnicfevtModuleSw-LSB1XP2B,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.3.1.9.4.101,HPN-ICF-ENTITY-VENDORTYPE-OID-MIB::hpnicfevtModuleSw-LSB1XP2C,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.3.1.9.4.102,HPN-ICF-ENTITY-VENDORTYPE-OID-MIB::hpnicfevtModuleSw-LSB1GV48B,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.3.1.9.4.103,HPN-ICF-ENTITY-VENDORTYPE-OID-MIB::hpnicfevtModuleSw-LSB1GV48C,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.3.1.9.4.104,HPN-ICF-ENTITY-VENDORTYPE-OID-MIB::hpnicfevtModuleSw-LSB1SRPC,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.3.1.9.4.105,HPN-ICF-ENTITY-VENDORTYPE-OID-MIB::hpnicfevtModuleSw-LSB1SRP1N0,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.3.1.9.4.106,HPN-ICF-ENTITY-VENDORTYPE-OID-MIB::hpnicfevtModuleSw-LSB1SRP1N1,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.3.1.9.4.107,HPN-ICF-ENTITY-VENDORTYPE-OID-MIB::hpnicfevtModuleSw-LSB1SRP1N2,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.3.1.9.4.108,HPN-ICF-ENTITY-VENDORTYPE-OID-MIB::hpnicfevtModuleSw-GT24,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.3.1.9.4.109,HPN-ICF-ENTITY-VENDORTYPE-OID-MIB::hpnicfevtModuleSw-GP24,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.3.1.9.4.110,HPN-ICF-ENTITY-VENDORTYPE-OID-MIB::hpnicfevtModuleSw-XP2,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.3.1.9.4.111,HPN-ICF-ENTITY-VENDORTYPE-OID-MIB::hpnicfevtModuleSw-GV48,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.3.1.9.4.112,HPN-ICF-ENTITY-VENDORTYPE-OID-MIB::hpnicfevtModuleSw-LSG1GP8U,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.3.1.9.4.113,HPN-ICF-ENTITY-VENDORTYPE-OID-MIB::hpnicfevtModuleSw-LSG1GT8U,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.3.1.9.4.114,HPN-ICF-ENTITY-VENDORTYPE-OID-MIB::hpnicfevtModuleSw-LSG1TG1U,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.3.1.9.4.115,HPN-ICF-ENTITY-VENDORTYPE-OID-MIB::hpnicfevtModuleSw-LSG1TD1U,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.3.1.9.4.116,HPN-ICF-ENTITY-VENDORTYPE-OID-MIB::hpnicfevtModuleSw-LSB2FT48C,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.3.1.9.4.117,HPN-ICF-ENTITY-VENDORTYPE-OID-MIB::hpnicfevtModuleSw-LSB1GT48B,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.3.1.9.4.118,HPN-ICF-ENTITY-VENDORTYPE-OID-MIB::hpnicfevtModuleSw-LSB1GT48C,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.3.1.9.4.119,HPN-ICF-ENTITY-VENDORTYPE-OID-MIB::hpnicfevtModuleSw-LS81GT48,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.3.1.9.4.120,HPN-ICF-ENTITY-VENDORTYPE-OID-MIB::hpnicfevtModuleSw-LS81SRPG0,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.3.1.9.4.121,HPN-ICF-ENTITY-VENDORTYPE-OID-MIB::hpnicfevtModuleSw-LS81SRPG1,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.3.1.9.4.122,HPN-ICF-ENTITY-VENDORTYPE-OID-MIB::hpnicfevtModuleSw-LS81SRPG2,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.3.1.9.4.123,HPN-ICF-ENTITY-VENDORTYPE-OID-MIB::hpnicfevtModuleSw-LS81SRPG3,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.3.1.9.4.125,HPN-ICF-ENTITY-VENDORTYPE-OID-MIB::hpnicfevtModuleSw-SR01SRPUB,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.3.1.9.4.126,HPN-ICF-ENTITY-VENDORTYPE-OID-MIB::hpnicfevtModuleSw-SR01SRPUA,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.3.1.9.4.127,HPN-ICF-ENTITY-VENDORTYPE-OID-MIB::hpnicfevtModuleSw-SR01GP12L,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.3.1.9.4.128,HPN-ICF-ENTITY-VENDORTYPE-OID-MIB::hpnicfevtModuleSw-SR01GP12W,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.3.1.9.4.129,HPN-ICF-ENTITY-VENDORTYPE-OID-MIB::hpnicfevtModuleSw-SR01FT48L,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.3.1.9.4.130,HPN-ICF-ENTITY-VENDORTYPE-OID-MIB::hpnicfevtModuleSw-SR01FT48W,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.3.1.9.4.131,HPN-ICF-ENTITY-VENDORTYPE-OID-MIB::hpnicfevtModuleSw-SR01XK1W,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.3.1.9.4.132,HPN-ICF-ENTITY-VENDORTYPE-OID-MIB::hpnicfevtModuleSw-SR01FP20W,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.3.1.9.4.133,HPN-ICF-ENTITY-VENDORTYPE-OID-MIB::hpnicfevtModuleSw-SR01GT12W,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.3.1.9.4.134,HPN-ICF-ENTITY-VENDORTYPE-OID-MIB::hpnicfevtModuleSw-SR01F32GL,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.3.1.9.4.135,HPN-ICF-ENTITY-VENDORTYPE-OID-MIB::hpnicfevtModuleSw-SR01F32GW,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.3.1.9.4.136,HPN-ICF-ENTITY-VENDORTYPE-OID-MIB::hpnicfevtModuleSw-SR01GT8PL,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.3.1.9.4.137,HPN-ICF-ENTITY-VENDORTYPE-OID-MIB::hpnicfevtModuleSw-SR01GT8PW,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.3.1.9.4.138,HPN-ICF-ENTITY-VENDORTYPE-OID-MIB::hpnicfevtModuleSw-SR01P4G8W,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.3.1.9.4.139,HPN-ICF-ENTITY-VENDORTYPE-OID-MIB::hpnicfevtModuleSw-LSA1FP8U,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.3.1.9.4.140,HPN-ICF-ENTITY-VENDORTYPE-OID-MIB::hpnicfevtModuleSw-LSB1SP4B,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.3.1.9.4.141,HPN-ICF-ENTITY-VENDORTYPE-OID-MIB::hpnicfevtModuleSw-LSB1SP4C,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.3.1.9.4.142,HPN-ICF-ENTITY-VENDORTYPE-OID-MIB::hpnicfevtModuleSw-LSB1UP1B,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.3.1.9.4.143,HPN-ICF-ENTITY-VENDORTYPE-OID-MIB::hpnicfevtModuleSw-LSB1UP1C,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.3.1.9.4.144,HPN-ICF-ENTITY-VENDORTYPE-OID-MIB::hpnicfevtModuleSw-LSB1XP4B,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.3.1.9.4.145,HPN-ICF-ENTITY-VENDORTYPE-OID-MIB::hpnicfevtModuleSw-LSB1XP4C,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.3.1.9.4.146,HPN-ICF-ENTITY-VENDORTYPE-OID-MIB::hpnicfevtModuleSw-SP4,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.3.1.9.4.147,HPN-ICF-ENTITY-VENDORTYPE-OID-MIB::hpnicfevtModuleSw-UP1,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.3.1.9.4.148,HPN-ICF-ENTITY-VENDORTYPE-OID-MIB::hpnicfevtModuleSw-XP4,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.3.1.9.4.149,HPN-ICF-ENTITY-VENDORTYPE-OID-MIB::hpnicfevtModuleSw-LS81VSNP,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.3.1.9.4.150,HPN-ICF-ENTITY-VENDORTYPE-OID-MIB::hpnicfevtModuleSw-LS81T12P,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.3.1.9.4.151,HPN-ICF-ENTITY-VENDORTYPE-OID-MIB::hpnicfevtModuleSw-LS81P12T,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.3.1.9.4.152,HPN-ICF-ENTITY-VENDORTYPE-OID-MIB::hpnicfevtModuleSw-LS81GP8UB,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.3.1.9.4.153,HPN-ICF-ENTITY-VENDORTYPE-OID-MIB::hpnicfevtModuleSw-LS81FT48E,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.3.1.9.4.154,HPN-ICF-ENTITY-VENDORTYPE-OID-MIB::hpnicfevtModuleSw-LS81GP4UB,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.3.1.9.4.155,HPN-ICF-ENTITY-VENDORTYPE-OID-MIB::hpnicfevtModuleSw-LS81GT8UE,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.3.1.9.4.156,HPN-ICF-ENTITY-VENDORTYPE-OID-MIB::hpnicfevtModuleSw-LS81GT48A,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.3.1.9.4.157,HPN-ICF-ENTITY-VENDORTYPE-OID-MIB::hpnicfevtModuleSw-LS81FP48,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.3.1.9.4.158,HPN-ICF-ENTITY-VENDORTYPE-OID-MIB::hpnicfevtModuleSw-LSB1XK1B,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.3.1.9.4.159,HPN-ICF-ENTITY-VENDORTYPE-OID-MIB::hpnicfevtModuleSw-LSB1XK1C,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.3.1.9.4.160,HPN-ICF-ENTITY-VENDORTYPE-OID-MIB::hpnicfevtModuleSw-SR01SRPUC,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.3.1.9.4.161,HPN-ICF-ENTITY-VENDORTYPE-OID-MIB::hpnicfevtModuleSw-SR01SRPUD,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.3.1.9.4.162,HPN-ICF-ENTITY-VENDORTYPE-OID-MIB::hpnicfevtModuleSw-SR01SRPUE,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.3.1.9.4.163,HPN-ICF-ENTITY-VENDORTYPE-OID-MIB::hpnicfevtModuleSw-LSB1SRP1N3,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.3.1.9.4.164,HPN-ICF-ENTITY-VENDORTYPE-OID-MIB::hpnicfevtModuleSw-LSB1VP2B,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.3.1.9.4.165,HPN-ICF-ENTITY-VENDORTYPE-OID-MIB::hpnicfevtModuleSw-LSB1NATB,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.3.1.9.4.166,HPN-ICF-ENTITY-VENDORTYPE-OID-MIB::hpnicfevtModuleSw-LSB1VPNB,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.3.1.9.4.167,HPN-ICF-ENTITY-VENDORTYPE-OID-MIB::hpnicfevtModuleSw-LSGP8P,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.3.1.9.4.168,HPN-ICF-ENTITY-VENDORTYPE-OID-MIB::hpnicfevtModuleSw-LSXK1P,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.3.1.9.4.169,HPN-ICF-ENTITY-VENDORTYPE-OID-MIB::hpnicfevtModuleSw-LSXP2P,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.3.1.9.4.170,HPN-ICF-ENTITY-VENDORTYPE-OID-MIB::hpnicfevtModuleSw-LS81FT48F,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.3.1.9.4.171,HPN-ICF-ENTITY-VENDORTYPE-OID-MIB::hpnicfevtModuleSw-LS81PT8G,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.3.1.9.4.172,HPN-ICF-ENTITY-VENDORTYPE-OID-MIB::hpnicfevtModuleSw-LS81PT4G,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.3.1.9.4.173,HPN-ICF-ENTITY-VENDORTYPE-OID-MIB::hpnicfevtModuleSw-LSSTK24G,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.3.1.9.4.174,HPN-ICF-ENTITY-VENDORTYPE-OID-MIB::hpnicfevtModuleSw-LS82GT20A,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.3.1.9.4.175,HPN-ICF-ENTITY-VENDORTYPE-OID-MIB::hpnicfevtModuleSw-LS82GP20A,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.3.1.9.4.176,HPN-ICF-ENTITY-VENDORTYPE-OID-MIB::hpnicfevtModuleSw-LS81TGX1C,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.3.1.9.4.177,HPN-ICF-ENTITY-VENDORTYPE-OID-MIB::hpnicfevtModuleSw-VP2,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.3.1.9.4.178,HPN-ICF-ENTITY-VENDORTYPE-OID-MIB::hpnicfevtModuleSw-LSA1FB8U,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.3.1.9.4.179,HPN-ICF-ENTITY-VENDORTYPE-OID-MIB::hpnicfevtModuleSw-LS81T12PE,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.3.1.9.4.180,HPN-ICF-ENTITY-VENDORTYPE-OID-MIB::hpnicfevtModuleSw-LS81P12TE,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.3.1.9.4.181,HPN-ICF-ENTITY-VENDORTYPE-OID-MIB::hpnicfevtModuleSw-LSB1SRP2N0,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.3.1.9.4.182,HPN-ICF-ENTITY-VENDORTYPE-OID-MIB::hpnicfevtModuleSw-LSB1SRP2N3,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.3.1.9.4.183,HPN-ICF-ENTITY-VENDORTYPE-OID-MIB::hpnicfevtModuleSw-LSB1GV48DB,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.3.1.9.4.184,HPN-ICF-ENTITY-VENDORTYPE-OID-MIB::hpnicfevtModuleSw-LSB1FW8B,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.3.1.9.4.185,HPN-ICF-ENTITY-VENDORTYPE-OID-MIB::hpnicfevtModuleSw-LSB1IPSEC8B,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.3.1.9.4.186,HPN-ICF-ENTITY-VENDORTYPE-OID-MIB::hpnicfevtModuleSw-LSB1IDSB,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.3.1.9.4.187,HPN-ICF-ENTITY-VENDORTYPE-OID-MIB::hpnicfevtModuleSw-LSB1IPSB,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.3.1.9.4.188,HPN-ICF-ENTITY-VENDORTYPE-OID-MIB::hpnicfevtModuleSw-LSB2FT48CA,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.3.1.9.4.189,HPN-ICF-ENTITY-VENDORTYPE-OID-MIB::hpnicfevtModuleSw-LSB1FP20CA,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.3.1.9.4.190,HPN-ICF-ENTITY-VENDORTYPE-OID-MIB::hpnicfevtModuleSw-LSB1F32GCA,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.3.1.9.4.191,HPN-ICF-ENTITY-VENDORTYPE-OID-MIB::hpnicfevtModuleSw-LSB1P4G8CA,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.3.1.9.4.192,HPN-ICF-ENTITY-VENDORTYPE-OID-MIB::hpnicfevtModuleSw-LSB1GT12CA,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.3.1.9.4.193,HPN-ICF-ENTITY-VENDORTYPE-OID-MIB::hpnicfevtModuleSw-LSB1GT24CA,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.3.1.9.4.194,HPN-ICF-ENTITY-VENDORTYPE-OID-MIB::hpnicfevtModuleSw-LSB1GP12CA,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.3.1.9.4.195,HPN-ICF-ENTITY-VENDORTYPE-OID-MIB::hpnicfevtModuleSw-LSB1GP24CA,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.3.1.9.4.196,HPN-ICF-ENTITY-VENDORTYPE-OID-MIB::hpnicfevtModuleSw-LSB1GT8PCA,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.3.1.9.4.197,HPN-ICF-ENTITY-VENDORTYPE-OID-MIB::hpnicfevtModuleSw-LSB1XP2CA,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.3.1.9.4.198,HPN-ICF-ENTITY-VENDORTYPE-OID-MIB::hpnicfevtModuleSw-LSB1XK1CA,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.3.1.9.4.199,HPN-ICF-ENTITY-VENDORTYPE-OID-MIB::hpnicfevtModuleSw-LSB1XP4CA,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.3.1.9.4.200,HPN-ICF-ENTITY-VENDORTYPE-OID-MIB::hpnicfevtModuleSw-LSB1UP1CA,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.3.1.9.4.201,HPN-ICF-ENTITY-VENDORTYPE-OID-MIB::hpnicfevtModuleSw-LSB1SP4CA,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.3.1.9.4.202,HPN-ICF-ENTITY-VENDORTYPE-OID-MIB::hpnicfevtModuleSw-LSB1VP2CA,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.3.1.9.4.203,HPN-ICF-ENTITY-VENDORTYPE-OID-MIB::hpnicfevtModuleSw-SR01FT48WA,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.3.1.9.4.204,HPN-ICF-ENTITY-VENDORTYPE-OID-MIB::hpnicfevtModuleSw-SR01FP20WA,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.3.1.9.4.205,HPN-ICF-ENTITY-VENDORTYPE-OID-MIB::hpnicfevtModuleSw-SR01F32GWA,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.3.1.9.4.206,HPN-ICF-ENTITY-VENDORTYPE-OID-MIB::hpnicfevtModuleSw-SR01P4G8WA,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.3.1.9.4.207,HPN-ICF-ENTITY-VENDORTYPE-OID-MIB::hpnicfevtModuleSw-SR01GT12WA,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.3.1.9.4.208,HPN-ICF-ENTITY-VENDORTYPE-OID-MIB::hpnicfevtModuleSw-SR01GT24WA,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.3.1.9.4.209,HPN-ICF-ENTITY-VENDORTYPE-OID-MIB::hpnicfevtModuleSw-SR01GP12WA,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.3.1.9.4.210,HPN-ICF-ENTITY-VENDORTYPE-OID-MIB::hpnicfevtModuleSw-SR01GP24WA,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.3.1.9.4.211,HPN-ICF-ENTITY-VENDORTYPE-OID-MIB::hpnicfevtModuleSw-SR01GT8PWA,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.3.1.9.4.212,HPN-ICF-ENTITY-VENDORTYPE-OID-MIB::hpnicfevtModuleSw-SR01XP2WA,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.3.1.9.4.213,HPN-ICF-ENTITY-VENDORTYPE-OID-MIB::hpnicfevtModuleSw-SR01XK1WA,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.3.1.9.4.214,HPN-ICF-ENTITY-VENDORTYPE-OID-MIB::hpnicfevtModuleSw-SR01UP1WA,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.3.1.9.4.215,HPN-ICF-ENTITY-VENDORTYPE-OID-MIB::hpnicfevtModuleSw-SR01SP4WA,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.3.1.9.4.216,HPN-ICF-ENTITY-VENDORTYPE-OID-MIB::hpnicfevtModuleSw-GP8U,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.3.1.9.4.217,HPN-ICF-ENTITY-VENDORTYPE-OID-MIB::hpnicfevtModuleSw-LSEXP1P,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.3.1.9.4.218,HPN-ICF-ENTITY-VENDORTYPE-OID-MIB::hpnicfevtModuleSw-LSEXK1P,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.3.1.9.4.219,HPN-ICF-ENTITY-VENDORTYPE-OID-MIB::hpnicfevtModuleSw-LSEXS1P,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.3.1.9.4.220,HPN-ICF-ENTITY-VENDORTYPE-OID-MIB::hpnicfevtModuleSw-LS81GP48,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.3.1.9.4.221,HPN-ICF-ENTITY-VENDORTYPE-OID-MIB::hpnicfevtModuleSw-LS81GT48B,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.3.1.9.4.222,HPN-ICF-ENTITY-VENDORTYPE-OID-MIB::hpnicfevtModuleSw-LS81T16P,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.3.1.9.4.223,HPN-ICF-ENTITY-VENDORTYPE-OID-MIB::hpnicfevtModuleSw-LS81T32P,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.3.1.9.4.224,HPN-ICF-ENTITY-VENDORTYPE-OID-MIB::hpnicfevtModuleSw-LS81TGX2,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.3.1.9.4.225,HPN-ICF-ENTITY-VENDORTYPE-OID-MIB::hpnicfevtModuleSw-LS81TGX4,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.3.1.9.4.226,HPN-ICF-ENTITY-VENDORTYPE-OID-MIB::hpnicfevtModuleSw-LSB1GV48DA,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.3.1.9.4.227,HPN-ICF-ENTITY-VENDORTYPE-OID-MIB::hpnicfevtModuleSw-SR01GV48VB,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.3.1.9.4.228,HPN-ICF-ENTITY-VENDORTYPE-OID-MIB::hpnicfevtModuleSw-LSB1GT24DB,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.3.1.9.4.229,HPN-ICF-ENTITY-VENDORTYPE-OID-MIB::hpnicfevtModuleSw-LSB1GP24DB,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.3.1.9.4.230,HPN-ICF-ENTITY-VENDORTYPE-OID-MIB::hpnicfevtModuleSw-LSB1GP24DC,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.3.1.9.4.231,HPN-ICF-ENTITY-VENDORTYPE-OID-MIB::hpnicfevtModuleSw-LSB1FW8DB,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.3.1.9.4.232,HPN-ICF-ENTITY-VENDORTYPE-OID-MIB::hpnicfevtModuleSw-LSB1IPSEC8DB,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.3.1.9.4.233,HPN-ICF-ENTITY-VENDORTYPE-OID-MIB::hpnicfevtModuleSw-SR01GT24VB,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.3.1.9.4.234,HPN-ICF-ENTITY-VENDORTYPE-OID-MIB::hpnicfevtModuleSw-SR01GP24VC,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.3.1.9.4.235,HPN-ICF-ENTITY-VENDORTYPE-OID-MIB::hpnicfevtModuleSw-SR01VP2WA,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.3.1.9.4.236,HPN-ICF-ENTITY-VENDORTYPE-OID-MIB::hpnicfevtModuleSw-SR01FW8VB,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.3.1.9.4.237,HPN-ICF-ENTITY-VENDORTYPE-OID-MIB::hpnicfevtModuleSw-SR01IPSEC8VB,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.3.1.9.4.238,HPN-ICF-ENTITY-VENDORTYPE-OID-MIB::hpnicfevtModuleSw-SR01NATL,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.3.1.9.4.239,HPN-ICF-ENTITY-VENDORTYPE-OID-MIB::hpnicfevtModuleSw-SR01VPNL,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.3.1.9.4.240,HPN-ICF-ENTITY-VENDORTYPE-OID-MIB::hpnicfevtModuleSw-LSB1GP24CB,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.3.1.9.4.241,HPN-ICF-ENTITY-VENDORTYPE-OID-MIB::hpnicfevtModuleSw-LSB1GP48DB,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.3.1.9.4.242,HPN-ICF-ENTITY-VENDORTYPE-OID-MIB::hpnicfevtModuleSw-LSB1XP2CB,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.3.1.9.4.243,HPN-ICF-ENTITY-VENDORTYPE-OID-MIB::hpnicfevtModuleSw-XP4L,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.3.1.9.4.244,HPN-ICF-ENTITY-VENDORTYPE-OID-MIB::hpnicfevtModuleSw-LSB1XP4LDB,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.3.1.9.4.245,HPN-ICF-ENTITY-VENDORTYPE-OID-MIB::hpnicfevtModuleSw-LSB1XP4LDC,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.3.1.9.4.246,HPN-ICF-ENTITY-VENDORTYPE-OID-MIB::hpnicfevtModuleSw-AHP4,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.3.1.9.4.247,HPN-ICF-ENTITY-VENDORTYPE-OID-MIB::hpnicfevtModuleSw-LSB1AHP4GCA,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.3.1.9.4.248,HPN-ICF-ENTITY-VENDORTYPE-OID-MIB::hpnicfevtModuleSw-CLP4,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.3.1.9.4.249,HPN-ICF-ENTITY-VENDORTYPE-OID-MIB::hpnicfevtModuleSw-LSB1CLP4GCA,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.3.1.9.4.250,HPN-ICF-ENTITY-VENDORTYPE-OID-MIB::hpnicfevtModuleSw-ET32,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.3.1.9.4.251,HPN-ICF-ENTITY-VENDORTYPE-OID-MIB::hpnicfevtModuleSw-LSB1ET32GCA,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.3.1.9.4.252,HPN-ICF-ENTITY-VENDORTYPE-OID-MIB::hpnicfevtModuleSw-LSB1IDSDB,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.3.1.9.4.253,HPN-ICF-ENTITY-VENDORTYPE-OID-MIB::hpnicfevtModuleSw-LSB1SRP2N1,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.3.1.9.4.254,HPN-ICF-ENTITY-VENDORTYPE-OID-MIB::hpnicfevtModuleSw-BOARD-LS82SRPB,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.3.1.9.4.255,HPN-ICF-ENTITY-VENDORTYPE-OID-MIB::hpnicfevtModuleSw-BORAD-LS83SRPC,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.3.1.9.4.256,HPN-ICF-ENTITY-VENDORTYPE-OID-MIB::hpnicfevtModuleSw-Main,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.3.1.9.4.257,HPN-ICF-ENTITY-VENDORTYPE-OID-MIB::hpnicfevtModuleSw-LSB1SRP2N2,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.3.1.9.4.258,HPN-ICF-ENTITY-VENDORTYPE-OID-MIB::hpnicfevtModuleSw-LSB1NAMB,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.3.1.9.4.259,HPN-ICF-ENTITY-VENDORTYPE-OID-MIB::hpnicfevtModuleSw-RSP2,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.3.1.9.4.260,HPN-ICF-ENTITY-VENDORTYPE-OID-MIB::hpnicfevtModuleSw-LSB1RSP2CA,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.3.1.9.4.261,HPN-ICF-ENTITY-VENDORTYPE-OID-MIB::hpnicfevtModuleSw-SR01XP4LVC,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.3.1.9.4.262,HPN-ICF-ENTITY-VENDORTYPE-OID-MIB::hpnicfevtModuleSw-SR01AHP4GWA,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.3.1.9.4.263,HPN-ICF-ENTITY-VENDORTYPE-OID-MIB::hpnicfevtModuleSw-SR01CLP4GWA,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.3.1.9.4.264,HPN-ICF-ENTITY-VENDORTYPE-OID-MIB::hpnicfevtModuleSw-SR01ET32GWA,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.3.1.9.4.265,HPN-ICF-ENTITY-VENDORTYPE-OID-MIB::hpnicfevtModuleSw-SR01IDSVB,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.3.1.9.4.266,HPN-ICF-ENTITY-VENDORTYPE-OID-MIB::hpnicfevtModuleSw-SR01SRPUF,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.3.1.9.4.267,HPN-ICF-ENTITY-VENDORTYPE-OID-MIB::hpnicfevtModuleSw-SR01NAML,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.3.1.9.4.268,HPN-ICF-ENTITY-VENDORTYPE-OID-MIB::hpnicfevtModuleSw-SR01RSP2WA,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.3.1.9.4.269,HPN-ICF-ENTITY-VENDORTYPE-OID-MIB::hpnicfevtModuleSw-LSPM1XP1P,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.3.1.9.4.270,HPN-ICF-ENTITY-VENDORTYPE-OID-MIB::hpnicfevtModuleSw-LSPM1XP2P,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.3.1.9.4.271,HPN-ICF-ENTITY-VENDORTYPE-OID-MIB::hpnicfevtModuleSw-LSPM1CX2P,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.3.1.9.4.272,HPN-ICF-ENTITY-VENDORTYPE-OID-MIB::hpnicfevtModuleSw-STK-1000BASE-T,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.3.1.9.4.300,HPN-ICF-ENTITY-VENDORTYPE-OID-MIB::hpnicfevtModuleSw-LSB1SRP1M0,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.3.1.9.4.301,HPN-ICF-ENTITY-VENDORTYPE-OID-MIB::hpnicfevtModuleSw-LSB1SRP1M1,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.3.1.9.4.302,HPN-ICF-ENTITY-VENDORTYPE-OID-MIB::hpnicfevtModuleSw-LSB1GP12DB,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.3.1.9.4.303,HPN-ICF-ENTITY-VENDORTYPE-OID-MIB::hpnicfevtModuleSw-LSB1GT12DB,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.3.1.9.4.304,HPN-ICF-ENTITY-VENDORTYPE-OID-MIB::hpnicfevtModuleSw-LSB1XK1DB,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.3.1.9.4.305,HPN-ICF-ENTITY-VENDORTYPE-OID-MIB::hpnicfevtModuleSw-LSB1XP2DB,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.3.1.9.4.306,HPN-ICF-ENTITY-VENDORTYPE-OID-MIB::hpnicfevtModuleSw-LSB1XP2DC,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.3.1.9.4.307,HPN-ICF-ENTITY-VENDORTYPE-OID-MIB::hpnicfevtModuleSw-LSB1GT48LDB,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.3.1.9.4.308,HPN-ICF-ENTITY-VENDORTYPE-OID-MIB::hpnicfevtModuleSw-LSB1XP4TDB,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.3.1.9.4.309,HPN-ICF-ENTITY-VENDORTYPE-OID-MIB::hpnicfevtModuleSw-LSB1XP4TDC,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.3.1.9.4.310,HPN-ICF-ENTITY-VENDORTYPE-OID-MIB::hpnicfevtModuleSw-LSB1RSP2DC,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.3.1.9.4.311,HPN-ICF-ENTITY-VENDORTYPE-OID-MIB::hpnicfevtModuleSw-LSB1VP2DC,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.3.1.9.4.312,HPN-ICF-ENTITY-VENDORTYPE-OID-MIB::hpnicfevtModuleSw-LSB1XP4DB,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.3.1.9.4.313,HPN-ICF-ENTITY-VENDORTYPE-OID-MIB::hpnicfevtModuleSw-LSB1SRP2E0,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.3.1.9.4.314,HPN-ICF-ENTITY-VENDORTYPE-OID-MIB::hpnicfevtModuleSw-LSB1SRP2E1,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.3.1.9.4.315,HPN-ICF-ENTITY-VENDORTYPE-OID-MIB::hpnicfevtModuleSw-LSB1SRP2E2,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.3.1.9.4.316,HPN-ICF-ENTITY-VENDORTYPE-OID-MIB::hpnicfevtModuleSw-LSB1SRP2E3,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.3.1.9.4.317,HPN-ICF-ENTITY-VENDORTYPE-OID-MIB::hpnicfevtModuleSw-SR01SRPUQ,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.3.1.9.4.318,HPN-ICF-ENTITY-VENDORTYPE-OID-MIB::hpnicfevtModuleSw-AHP1,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.3.1.9.4.319,HPN-ICF-ENTITY-VENDORTYPE-OID-MIB::hpnicfevtModuleSw-AHP2,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.3.1.9.4.320,HPN-ICF-ENTITY-VENDORTYPE-OID-MIB::hpnicfevtModuleSw-CLP1,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.3.1.9.4.321,HPN-ICF-ENTITY-VENDORTYPE-OID-MIB::hpnicfevtModuleSw-CLP2,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.3.1.9.4.322,HPN-ICF-ENTITY-VENDORTYPE-OID-MIB::hpnicfevtModuleSw-ET16,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.3.1.9.4.323,HPN-ICF-ENTITY-VENDORTYPE-OID-MIB::hpnicfevtModuleSw-LSB1SRP1NA0,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.3.1.9.4.324,HPN-ICF-ENTITY-VENDORTYPE-OID-MIB::hpnicfevtModuleSw-LSB1SRP1NA1,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.3.1.9.4.325,HPN-ICF-ENTITY-VENDORTYPE-OID-MIB::hpnicfevtModuleSw-LSB1SRP1NA2,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.3.1.9.4.326,HPN-ICF-ENTITY-VENDORTYPE-OID-MIB::hpnicfevtModuleSw-LSB1SRP1NA3,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.3.1.9.4.327,HPN-ICF-ENTITY-VENDORTYPE-OID-MIB::hpnicfevtModuleSw-SR01AHP1GWA,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.3.1.9.4.328,HPN-ICF-ENTITY-VENDORTYPE-OID-MIB::hpnicfevtModuleSw-SR01AHP2GWA,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.3.1.9.4.329,HPN-ICF-ENTITY-VENDORTYPE-OID-MIB::hpnicfevtModuleSw-SR01CLP1GWA,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.3.1.9.4.330,HPN-ICF-ENTITY-VENDORTYPE-OID-MIB::hpnicfevtModuleSw-SR01CLP2GWA,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.3.1.9.4.331,HPN-ICF-ENTITY-VENDORTYPE-OID-MIB::hpnicfevtModuleSw-SR01ET16GWA,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.3.1.9.4.332,HPN-ICF-ENTITY-VENDORTYPE-OID-MIB::hpnicfevtModuleSw-SR01GP12VB,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.3.1.9.4.333,HPN-ICF-ENTITY-VENDORTYPE-OID-MIB::hpnicfevtModuleSw-SR01XK1VB,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.3.1.9.4.334,HPN-ICF-ENTITY-VENDORTYPE-OID-MIB::hpnicfevtModuleSw-SR01XP2VC,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.3.1.9.4.335,HPN-ICF-ENTITY-VENDORTYPE-OID-MIB::hpnicfevtModuleSw-SR01XP4LVB,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.3.1.9.4.336,HPN-ICF-ENTITY-VENDORTYPE-OID-MIB::hpnicfevtModuleSw-SR01SRPUEA,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.3.1.9.4.337,HPN-ICF-ENTITY-VENDORTYPE-OID-MIB::hpnicfevtModuleSw-LSB1SRP1N4,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.3.1.9.4.338,HPN-ICF-ENTITY-VENDORTYPE-OID-MIB::hpnicfevtModuleSw-LSB1SRP1N5,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.3.1.9.4.339,HPN-ICF-ENTITY-VENDORTYPE-OID-MIB::hpnicfevtModuleSw-LSB1SRP1N6,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.3.1.9.4.340,HPN-ICF-ENTITY-VENDORTYPE-OID-MIB::hpnicfevtModuleSw-LSB1SRP1N7,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.3.1.9.4.341,HPN-ICF-ENTITY-VENDORTYPE-OID-MIB::hpnicfevtModuleSw-LSB1SRP2N4,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.3.1.9.4.342,HPN-ICF-ENTITY-VENDORTYPE-OID-MIB::hpnicfevtModuleSw-LSB1SRP2N5,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.3.1.9.4.343,HPN-ICF-ENTITY-VENDORTYPE-OID-MIB::hpnicfevtModuleSw-LSB1SRP2N6,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.3.1.9.4.344,HPN-ICF-ENTITY-VENDORTYPE-OID-MIB::hpnicfevtModuleSw-LSB1SRP2N7,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.3.1.9.4.345,HPN-ICF-ENTITY-VENDORTYPE-OID-MIB::hpnicfevtModuleSw-LSB1SRP1NA4,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.3.1.9.4.346,HPN-ICF-ENTITY-VENDORTYPE-OID-MIB::hpnicfevtModuleSw-LSB1SRP1NA5,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.3.1.9.4.347,HPN-ICF-ENTITY-VENDORTYPE-OID-MIB::hpnicfevtModuleSw-LSB1SRP1NA6,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.3.1.9.4.348,HPN-ICF-ENTITY-VENDORTYPE-OID-MIB::hpnicfevtModuleSw-LSB1SRP1NA7,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.3.1.9.4.349,HPN-ICF-ENTITY-VENDORTYPE-OID-MIB::hpnicfevtModuleSw-LSB2GV48DA,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.3.1.9.4.350,HPN-ICF-ENTITY-VENDORTYPE-OID-MIB::hpnicfevtModuleSw-LSB1RGP2GDB,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.3.1.9.4.351,HPN-ICF-ENTITY-VENDORTYPE-OID-MIB::hpnicfevtModuleSw-LSB1RGP4GDB,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.3.1.9.4.352,HPN-ICF-ENTITY-VENDORTYPE-OID-MIB::hpnicfevtModuleSw-LSB2GP24DB,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.3.1.9.4.353,HPN-ICF-ENTITY-VENDORTYPE-OID-MIB::hpnicfevtModuleSw-LSB2GP24DC,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.3.1.9.4.354,HPN-ICF-ENTITY-VENDORTYPE-OID-MIB::hpnicfevtModuleSw-LSB2GT24DB,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.3.1.9.4.355,HPN-ICF-ENTITY-VENDORTYPE-OID-MIB::hpnicfevtModuleSw-LSB2FW8DB,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.3.1.9.4.356,HPN-ICF-ENTITY-VENDORTYPE-OID-MIB::hpnicfevtModuleSw-LSB2IPSEC8DB,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.3.1.9.4.357,HPN-ICF-ENTITY-VENDORTYPE-OID-MIB::hpnicfevtModuleSw-LSB2GV48DB,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.3.1.9.4.358,HPN-ICF-ENTITY-VENDORTYPE-OID-MIB::hpnicfevtModuleSw-RGP2,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.3.1.9.4.359,HPN-ICF-ENTITY-VENDORTYPE-OID-MIB::hpnicfevtModuleSw-RGP4,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.3.1.9.4.360,HPN-ICF-ENTITY-VENDORTYPE-OID-MIB::hpnicfevtModuleSw-SR02FW8VB,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.3.1.9.4.361,HPN-ICF-ENTITY-VENDORTYPE-OID-MIB::hpnicfevtModuleSw-SR02IPSEC8VB,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.3.1.9.4.362,HPN-ICF-ENTITY-VENDORTYPE-OID-MIB::hpnicfevtModuleSw-LSB2SRP1N0,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.3.1.9.4.363,HPN-ICF-ENTITY-VENDORTYPE-OID-MIB::hpnicfevtModuleSw-LSB2SRP1N1,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.3.1.9.4.364,HPN-ICF-ENTITY-VENDORTYPE-OID-MIB::hpnicfevtModuleSw-LSB2SRP1N2,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.3.1.9.4.365,HPN-ICF-ENTITY-VENDORTYPE-OID-MIB::hpnicfevtModuleSw-LSB2SRP1N3,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.3.1.9.4.366,HPN-ICF-ENTITY-VENDORTYPE-OID-MIB::hpnicfevtModuleSw-LSB2SRP1N4,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.3.1.9.4.367,HPN-ICF-ENTITY-VENDORTYPE-OID-MIB::hpnicfevtModuleSw-LSB2SRP1N5,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.3.1.9.4.368,HPN-ICF-ENTITY-VENDORTYPE-OID-MIB::hpnicfevtModuleSw-LSB2SRP1N6,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.3.1.9.4.369,HPN-ICF-ENTITY-VENDORTYPE-OID-MIB::hpnicfevtModuleSw-LSB2SRP1N7,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.3.1.9.4.370,HPN-ICF-ENTITY-VENDORTYPE-OID-MIB::hpnicfevtModuleSw-SR02SRPUE,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.3.1.9.4.371,HPN-ICF-ENTITY-VENDORTYPE-OID-MIB::hpnicfevtModuleSw-SR01LN1BQH0,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.3.1.9.4.372,HPN-ICF-ENTITY-VENDORTYPE-OID-MIB::hpnicfevtModuleSw-SR01DXP1L,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.3.1.9.4.373,HPN-ICF-ENTITY-VENDORTYPE-OID-MIB::hpnicfevtModuleSw-SR01DGP10L,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.3.1.9.4.374,HPN-ICF-ENTITY-VENDORTYPE-OID-MIB::hpnicfevtModuleSw-SR01DRSP2L,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.3.1.9.4.375,HPN-ICF-ENTITY-VENDORTYPE-OID-MIB::hpnicfevtModuleSw-SR01DRUP1L,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.3.1.9.4.376,HPN-ICF-ENTITY-VENDORTYPE-OID-MIB::hpnicfevtModuleSw-SR01DGP20R,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.3.1.9.4.377,HPN-ICF-ENTITY-VENDORTYPE-OID-MIB::hpnicfevtModuleSw-SR01DPLP8L,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.3.1.9.4.378,HPN-ICF-ENTITY-VENDORTYPE-OID-MIB::hpnicfevtModuleSw-SR01DXP2R,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.3.1.9.4.379,HPN-ICF-ENTITY-VENDORTYPE-OID-MIB::hpnicfevtModuleSw-LSB1FW2A0,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.3.1.9.4.380,HPN-ICF-ENTITY-VENDORTYPE-OID-MIB::hpnicfevtModuleSw-LSB1GP48LDB,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.3.1.9.4.381,HPN-ICF-ENTITY-VENDORTYPE-OID-MIB::hpnicfevtModuleSw-SR01LN1BNA0,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.3.1.9.4.382,HPN-ICF-ENTITY-VENDORTYPE-OID-MIB::hpnicfevtModuleSw-SR01LN2BQH0,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.3.1.9.4.383,HPN-ICF-ENTITY-VENDORTYPE-OID-MIB::hpnicfevtModuleSw-SR01LN2BNA0,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.3.1.9.4.384,HPN-ICF-ENTITY-VENDORTYPE-OID-MIB::hpnicfevtModuleSw-SR01DGT20R,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.3.1.9.4.385,HPN-ICF-ENTITY-VENDORTYPE-OID-MIB::hpnicfevtModuleSw-SR01DPSP4L,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.3.1.9.4.386,HPN-ICF-ENTITY-VENDORTYPE-OID-MIB::hpnicfevtModuleSw-SR01DPUP1L,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.3.1.9.4.387,HPN-ICF-ENTITY-VENDORTYPE-OID-MIB::hpnicfevtModuleSw-SR01DPL2G6L,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.3.1.9.4.388,HPN-ICF-ENTITY-VENDORTYPE-OID-MIB::hpnicfevtModuleSw-SR01DPH2G6L,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.3.1.9.4.389,HPN-ICF-ENTITY-VENDORTYPE-OID-MIB::hpnicfevtModuleSw-SR01DPS2G4L,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.3.1.9.4.390,HPN-ICF-ENTITY-VENDORTYPE-OID-MIB::hpnicfevtModuleSw-SR01DCL1G8L,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.3.1.9.4.391,HPN-ICF-ENTITY-VENDORTYPE-OID-MIB::hpnicfevtModuleSw-SR01DCL2G8L,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.3.1.9.4.392,HPN-ICF-ENTITY-VENDORTYPE-OID-MIB::hpnicfevtModuleSw-SR01DET8G8L,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.3.1.9.4.393,HPN-ICF-ENTITY-VENDORTYPE-OID-MIB::hpnicfevtModuleSw-SR02SRP2E3,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.3.1.9.4.394,HPN-ICF-ENTITY-VENDORTYPE-OID-MIB::hpnicfevtModuleSw-SR02SRP1E3,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.3.1.9.4.395,HPN-ICF-ENTITY-VENDORTYPE-OID-MIB::hpnicfevtModuleSw-SR02SRP1M3,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.3.1.9.4.396,HPN-ICF-ENTITY-VENDORTYPE-OID-MIB::hpnicfevtModuleSw-SR01DQCP4L,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.3.1.9.4.397,HPN-ICF-ENTITY-VENDORTYPE-OID-MIB::hpnicfevtModuleSw-SR01DTCP8L,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.3.1.9.4.398,HPN-ICF-ENTITY-VENDORTYPE-OID-MIB::hpnicfevtModuleSw-LSB1AFC1A0,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.3.1.9.4.399,HPN-ICF-ENTITY-VENDORTYPE-OID-MIB::hpnicfevtModuleSw-LSB1SSL1A0,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.3.1.9.4.400,HPN-ICF-ENTITY-VENDORTYPE-OID-MIB::hpnicfevtModuleSw-IMNAM,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.3.1.9.4.401,HPN-ICF-ENTITY-VENDORTYPE-OID-MIB::hpnicfevtModuleSw-IMNAT,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.3.1.9.4.402,HPN-ICF-ENTITY-VENDORTYPE-OID-MIB::hpnicfevtModuleSw-PICAHP1L,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.3.1.9.4.403,HPN-ICF-ENTITY-VENDORTYPE-OID-MIB::hpnicfevtModuleSw-PICALP4L,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.3.1.9.4.404,HPN-ICF-ENTITY-VENDORTYPE-OID-MIB::hpnicfevtModuleSw-PICCHP4L,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.3.1.9.4.405,HPN-ICF-ENTITY-VENDORTYPE-OID-MIB::hpnicfevtModuleSw-PICCHS1G4L,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.3.1.9.4.406,HPN-ICF-ENTITY-VENDORTYPE-OID-MIB::hpnicfevtModuleSw-PICCLS4G4L,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.3.1.9.4.407,HPN-ICF-ENTITY-VENDORTYPE-OID-MIB::hpnicfevtModuleSw-PICCSP1L,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.3.1.9.4.408,HPN-ICF-ENTITY-VENDORTYPE-OID-MIB::hpnicfevtModuleSw-LSB1ACG1A0,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.3.1.9.4.409,HPN-ICF-ENTITY-VENDORTYPE-OID-MIB::hpnicfevtModuleSw-LST1MRPNC1,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.3.1.9.4.410,HPN-ICF-ENTITY-VENDORTYPE-OID-MIB::hpnicfevtModuleSw-LST1SF18B1,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.3.1.9.4.411,HPN-ICF-ENTITY-VENDORTYPE-OID-MIB::hpnicfevtModuleSw-LST1SF08B1,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.3.1.9.4.412,HPN-ICF-ENTITY-VENDORTYPE-OID-MIB::hpnicfevtModuleSw-LST1GT48LEC1,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.3.1.9.4.413,HPN-ICF-ENTITY-VENDORTYPE-OID-MIB::hpnicfevtModuleSw-LST1GP48LEC1,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.3.1.9.4.414,HPN-ICF-ENTITY-VENDORTYPE-OID-MIB::hpnicfevtModuleSw-LST1XP4LEC1,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.3.1.9.4.415,HPN-ICF-ENTITY-VENDORTYPE-OID-MIB::hpnicfevtModuleSw-LST1XP8LEC1,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.3.1.9.4.416,HPN-ICF-ENTITY-VENDORTYPE-OID-MIB::hpnicfevtModuleSw-LSR1SRP2B1,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.3.1.9.4.417,HPN-ICF-ENTITY-VENDORTYPE-OID-MIB::hpnicfevtModuleSw-LSR1SRP2C1,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.3.1.9.4.418,HPN-ICF-ENTITY-VENDORTYPE-OID-MIB::hpnicfevtModuleSw-LSR1SRP2B2,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.3.1.9.4.419,HPN-ICF-ENTITY-VENDORTYPE-OID-MIB::hpnicfevtModuleSw-LSR1SRP2C2,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.3.1.9.4.420,HPN-ICF-ENTITY-VENDORTYPE-OID-MIB::hpnicfevtModuleSw-LSR1GT24LEC1,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.3.1.9.4.421,HPN-ICF-ENTITY-VENDORTYPE-OID-MIB::hpnicfevtModuleSw-LSR1GP24LEB1,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.3.1.9.4.422,HPN-ICF-ENTITY-VENDORTYPE-OID-MIB::hpnicfevtModuleSw-LSR1GP24LEC1,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.3.1.9.4.423,HPN-ICF-ENTITY-VENDORTYPE-OID-MIB::hpnicfevtModuleSw-LSR1GT48LEB1,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.3.1.9.4.424,HPN-ICF-ENTITY-VENDORTYPE-OID-MIB::hpnicfevtModuleSw-LSR1GT48LEC1,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.3.1.9.4.425,HPN-ICF-ENTITY-VENDORTYPE-OID-MIB::hpnicfevtModuleSw-LSR1GP48LEB1,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.3.1.9.4.426,HPN-ICF-ENTITY-VENDORTYPE-OID-MIB::hpnicfevtModuleSw-LSR1GP48LEC1,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.3.1.9.4.427,HPN-ICF-ENTITY-VENDORTYPE-OID-MIB::hpnicfevtModuleSw-LSR2GV48REB1,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.3.1.9.4.428,HPN-ICF-ENTITY-VENDORTYPE-OID-MIB::hpnicfevtModuleSw-LSR1XP2LEB1,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.3.1.9.4.429,HPN-ICF-ENTITY-VENDORTYPE-OID-MIB::hpnicfevtModuleSw-LSR1XP2LEC1,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.3.1.9.4.430,HPN-ICF-ENTITY-VENDORTYPE-OID-MIB::hpnicfevtModuleSw-LSR1XP4LEB1,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.3.1.9.4.431,HPN-ICF-ENTITY-VENDORTYPE-OID-MIB::hpnicfevtModuleSw-LSR1XP4LEC1,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.3.1.9.4.432,HPN-ICF-ENTITY-VENDORTYPE-OID-MIB::hpnicfevtModuleSw-IMFW,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.3.1.9.4.433,HPN-ICF-ENTITY-VENDORTYPE-OID-MIB::hpnicfevtModuleSw-LSB1LB1A0,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.3.1.9.4.434,HPN-ICF-ENTITY-VENDORTYPE-OID-MIB::hpnicfevtModuleSw-LSB1IPS1A0,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.3.1.9.4.435,HPN-ICF-ENTITY-VENDORTYPE-OID-MIB::hpnicfevtModuleSw-LST1GT48LEB1,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.3.1.9.4.436,HPN-ICF-ENTITY-VENDORTYPE-OID-MIB::hpnicfevtModuleSw-LST1GP48LEB1,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.3.1.9.4.437,HPN-ICF-ENTITY-VENDORTYPE-OID-MIB::hpnicfevtModuleSw-LST1XP4LEB1,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.3.1.9.4.438,HPN-ICF-ENTITY-VENDORTYPE-OID-MIB::hpnicfevtModuleSw-LST1XP8LEB1,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.3.1.9.4.439,HPN-ICF-ENTITY-VENDORTYPE-OID-MIB::hpnicfevtModuleSw-LST1XP32REB1,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.3.1.9.4.440,HPN-ICF-ENTITY-VENDORTYPE-OID-MIB::hpnicfevtModuleSw-LST1XP32REC1,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.3.1.9.4.441,HPN-ICF-ENTITY-VENDORTYPE-OID-MIB::hpnicfevtModuleSw-LSR1FW2A1,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.3.1.9.4.442,HPN-ICF-ENTITY-VENDORTYPE-OID-MIB::hpnicfevtModuleSw-LSR1SSL1A1,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.3.1.9.4.443,HPN-ICF-ENTITY-VENDORTYPE-OID-MIB::hpnicfevtModuleSw-SR01DET32G2L,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.3.1.9.4.444,HPN-ICF-ENTITY-VENDORTYPE-OID-MIB::hpnicfevtModuleSw-LSR1GP24LEF1,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.3.1.9.4.445,HPN-ICF-ENTITY-VENDORTYPE-OID-MIB::hpnicfevtModuleSw-LSR1XP4LEF1,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.3.1.9.4.446,HPN-ICF-ENTITY-VENDORTYPE-OID-MIB::hpnicfevtModuleSw-LSR1LB1A1,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.3.1.9.4.447,HPN-ICF-ENTITY-VENDORTYPE-OID-MIB::hpnicfevtModuleSw-LSR1NSM1A1,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.3.1.9.4.448,HPN-ICF-ENTITY-VENDORTYPE-OID-MIB::hpnicfevtModuleSw-LSR1ACG1A1,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.3.1.9.4.449,HPN-ICF-ENTITY-VENDORTYPE-OID-MIB::hpnicfevtModuleSw-LSR1IPS1A1,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.3.1.9.4.450,HPN-ICF-ENTITY-VENDORTYPE-OID-MIB::hpnicfevtModuleSw-LSR2GP24LEB1,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.3.1.9.4.451,HPN-ICF-ENTITY-VENDORTYPE-OID-MIB::hpnicfevtModuleSw-LSR2GT24LEB1,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.3.1.9.4.452,HPN-ICF-ENTITY-VENDORTYPE-OID-MIB::hpnicfevtModuleSw-LSR2GT48LEB1,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.3.1.9.4.453,HPN-ICF-ENTITY-VENDORTYPE-OID-MIB::hpnicfevtModuleSw-SPC-GP24L,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.3.1.9.4.454,HPN-ICF-ENTITY-VENDORTYPE-OID-MIB::hpnicfevtModuleSw-SPC-GT48L,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.3.1.9.4.455,HPN-ICF-ENTITY-VENDORTYPE-OID-MIB::hpnicfevtModuleSw-SPC-GP48L,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.3.1.9.4.456,HPN-ICF-ENTITY-VENDORTYPE-OID-MIB::hpnicfevtModuleSw-SPC-XP2L,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.3.1.9.4.457,HPN-ICF-ENTITY-VENDORTYPE-OID-MIB::hpnicfevtModuleSw-SPC-XP4L,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.3.1.9.4.458,HPN-ICF-ENTITY-VENDORTYPE-OID-MIB::hpnicfevtModuleSw-SR06SRP2E3,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.3.1.9.4.459,HPN-ICF-ENTITY-VENDORTYPE-OID-MIB::hpnicfevtModuleSw-SPE-2010-E,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.3.1.9.4.460,HPN-ICF-ENTITY-VENDORTYPE-OID-MIB::hpnicfevtModuleSw-SPE-2020-E,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.3.1.9.4.461,HPN-ICF-ENTITY-VENDORTYPE-OID-MIB::hpnicfevtModuleSw-SPC-XP4L-S-SDI,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.3.1.9.4.462,HPN-ICF-ENTITY-VENDORTYPE-OID-MIB::hpnicfevtModuleSw-SPC-GT48L-SDI,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.3.1.9.4.463,HPN-ICF-ENTITY-VENDORTYPE-OID-MIB::hpnicfevtModuleSw-SPC-GP48L-S-SDI,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.3.1.9.4.464,HPN-ICF-ENTITY-VENDORTYPE-OID-MIB::hpnicfevtModuleSw-SPC-SR02OPMA0,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.3.1.9.4.465,HPN-ICF-ENTITY-VENDORTYPE-OID-MIB::hpnicfevtModuleSw-LSR1XP16REB1,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.3.1.9.4.466,HPN-ICF-ENTITY-VENDORTYPE-OID-MIB::hpnicfevtModuleSw-LSR1GP48LEF1,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.3.1.9.4.467,HPN-ICF-ENTITY-VENDORTYPE-OID-MIB::hpnicfevtModuleSw-LST1GP48LEF1,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.3.1.9.4.468,HPN-ICF-ENTITY-VENDORTYPE-OID-MIB::hpnicfevtModuleSw-LST1XP8LEF1,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.3.1.9.4.469,HPN-ICF-ENTITY-VENDORTYPE-OID-MIB::hpnicfevtModuleSw-SPE-1010-II,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.3.1.9.4.470,HPN-ICF-ENTITY-VENDORTYPE-OID-MIB::hpnicfevtModuleSw-SPE-1010-E-II,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.3.1.9.4.471,HPN-ICF-ENTITY-VENDORTYPE-OID-MIB::hpnicfevtModuleSw-SPE-1020-II,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.3.1.9.4.472,HPN-ICF-ENTITY-VENDORTYPE-OID-MIB::hpnicfevtModuleSw-SPE-1020-E-II,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.3.1.9.4.473,HPN-ICF-ENTITY-VENDORTYPE-OID-MIB::hpnicfevtModuleSw-LST1FW2A1,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.3.1.9.4.474,HPN-ICF-ENTITY-VENDORTYPE-OID-MIB::hpnicfevtModuleSw-LST1NSM1A1,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.3.1.9.4.475,HPN-ICF-ENTITY-VENDORTYPE-OID-MIB::hpnicfevtModuleSw-LST1LB1A1,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.3.1.9.4.476,HPN-ICF-ENTITY-VENDORTYPE-OID-MIB::hpnicfevtModuleSw-LST1ACG1A1,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.3.1.9.4.477,HPN-ICF-ENTITY-VENDORTYPE-OID-MIB::hpnicfevtModuleSw-LST1IPS1A1,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.3.1.9.4.478,HPN-ICF-ENTITY-VENDORTYPE-OID-MIB::hpnicfevtModuleSw-LSR1DRUP1L1,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.3.1.9.4.479,HPN-ICF-ENTITY-VENDORTYPE-OID-MIB::hpnicfevtModuleSw-LSR1DPUP1L1,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.3.1.9.4.480,HPN-ICF-ENTITY-VENDORTYPE-OID-MIB::hpnicfevtModuleSw-LSR1DPSP4L1,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.3.1.9.4.481,HPN-ICF-ENTITY-VENDORTYPE-OID-MIB::hpnicfevtModuleSw-LSR1DTCP8L1,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.3.1.9.4.482,HPN-ICF-ENTITY-VENDORTYPE-OID-MIB::hpnicfevtModuleSw-LSR1DXP1L1,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.3.1.9.4.483,HPN-ICF-ENTITY-VENDORTYPE-OID-MIB::hpnicfevtModuleSw-LSR1DGP10L1,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.3.1.9.4.484,HPN-ICF-ENTITY-VENDORTYPE-OID-MIB::hpnicfevtModuleSw-LSR1LN1BNL1,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.3.1.9.4.485,HPN-ICF-ENTITY-VENDORTYPE-OID-MIB::hpnicfevtModuleSw-LSR1LN2BL1,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.3.1.9.4.486,HPN-ICF-ENTITY-VENDORTYPE-OID-MIB::hpnicfevtModuleSw-LSR1SRP2D1,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.3.1.9.4.487,HPN-ICF-ENTITY-VENDORTYPE-OID-MIB::hpnicfevtModuleSw-IM-NAT-II,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.3.1.9.4.488,HPN-ICF-ENTITY-VENDORTYPE-OID-MIB::hpnicfevtModuleSw-IM-NAM-II,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.3.1.9.4.489,HPN-ICF-ENTITY-VENDORTYPE-OID-MIB::hpnicfevtModuleSw-CR-MRP-I,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.3.1.9.4.490,HPN-ICF-ENTITY-VENDORTYPE-OID-MIB::hpnicfevtModuleSw-CR-SF18C,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.3.1.9.4.491,HPN-ICF-ENTITY-VENDORTYPE-OID-MIB::hpnicfevtModuleSw-CR-SF08C,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.3.1.9.4.492,HPN-ICF-ENTITY-VENDORTYPE-OID-MIB::hpnicfevtModuleSw-CR-SPC-XP8LEF,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.3.1.9.4.493,HPN-ICF-ENTITY-VENDORTYPE-OID-MIB::hpnicfevtModuleSw-CR-SPC-XP4LEF,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.3.1.9.4.494,HPN-ICF-ENTITY-VENDORTYPE-OID-MIB::hpnicfevtModuleSw-CR-SPC-GP48LEF,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.3.1.9.4.495,HPN-ICF-ENTITY-VENDORTYPE-OID-MIB::hpnicfevtModuleSw-CR-SPC-GT48LEF,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.3.1.9.4.496,HPN-ICF-ENTITY-VENDORTYPE-OID-MIB::hpnicfevtModuleSw-CR-SPE-3020-E,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.3.1.9.4.497,HPN-ICF-ENTITY-VENDORTYPE-OID-MIB::hpnicfevtModuleSw-CR-SPC-PUP4L-E,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.3.1.9.4.498,HPN-ICF-ENTITY-VENDORTYPE-OID-MIB::hpnicfevtModuleSw-LST1SF08C1,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.3.1.9.4.499,HPN-ICF-ENTITY-VENDORTYPE-OID-MIB::hpnicfevtModuleSw-LST1SF18C1,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.3.1.9.4.500,HPN-ICF-ENTITY-VENDORTYPE-OID-MIB::hpnicfevtModuleSw-LS81GP16TM,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.3.1.9.4.501,HPN-ICF-ENTITY-VENDORTYPE-OID-MIB::hpnicfevtModuleSw-LS81VP4C,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.3.1.9.4.502,HPN-ICF-ENTITY-VENDORTYPE-OID-MIB::hpnicfevtModuleSw-LS8M1PT8P0,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.3.1.9.4.503,HPN-ICF-ENTITY-VENDORTYPE-OID-MIB::hpnicfevtModuleSw-LS8M1PT8GB0,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.3.1.9.4.504,HPN-ICF-ENTITY-VENDORTYPE-OID-MIB::hpnicfevtModuleSw-LS8M1PT4GB0,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.3.1.9.4.505,HPN-ICF-ENTITY-VENDORTYPE-OID-MIB::hpnicfevtModuleSw-LS81GP2R,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.3.1.9.4.506,HPN-ICF-ENTITY-VENDORTYPE-OID-MIB::hpnicfevtModuleSw-LS81GP4R,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.3.1.9.4.507,HPN-ICF-ENTITY-VENDORTYPE-OID-MIB::hpnicfevtModuleSw-LS81IPSECA,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.3.1.9.4.508,HPN-ICF-ENTITY-VENDORTYPE-OID-MIB::hpnicfevtModuleSw-LS81FWA,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.3.1.9.4.509,HPN-ICF-ENTITY-VENDORTYPE-OID-MIB::hpnicfevtModuleSw-LS82VSNP,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.3.1.9.4.510,HPN-ICF-ENTITY-VENDORTYPE-OID-MIB::hpnicfevtModuleSw-LSQ1GV48SA,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.3.1.9.4.511,HPN-ICF-ENTITY-VENDORTYPE-OID-MIB::hpnicfevtModuleSw-LSQ1SRPB,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.3.1.9.4.512,HPN-ICF-ENTITY-VENDORTYPE-OID-MIB::hpnicfevtModuleSw-LSQ1SRP2XB,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.3.1.9.4.513,HPN-ICF-ENTITY-VENDORTYPE-OID-MIB::hpnicfevtModuleSw-LSQ1SRP1CB,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.3.1.9.4.514,HPN-ICF-ENTITY-VENDORTYPE-OID-MIB::hpnicfevtModuleSw-LSQ1FV48SA,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.3.1.9.4.515,HPN-ICF-ENTITY-VENDORTYPE-OID-MIB::hpnicfevtModuleSw-LSD1MPUA,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.3.1.9.4.516,HPN-ICF-ENTITY-VENDORTYPE-OID-MIB::hpnicfevtModuleSw-LSD1GP20A0,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.3.1.9.4.517,HPN-ICF-ENTITY-VENDORTYPE-OID-MIB::hpnicfevtModuleSw-LSD1GP20TA0,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.3.1.9.4.518,HPN-ICF-ENTITY-VENDORTYPE-OID-MIB::hpnicfevtModuleSw-LSD1GP36A0,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.3.1.9.4.519,HPN-ICF-ENTITY-VENDORTYPE-OID-MIB::hpnicfevtModuleSw-LSD1GP20XA0,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.3.1.9.4.520,HPN-ICF-ENTITY-VENDORTYPE-OID-MIB::hpnicfevtModuleSw-LSD1GP20EA0,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.3.1.9.4.521,HPN-ICF-ENTITY-VENDORTYPE-OID-MIB::hpnicfevtModuleSw-LSD1GP20RA0,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.3.1.9.4.522,HPN-ICF-ENTITY-VENDORTYPE-OID-MIB::hpnicfevtModuleSw-LSD1GP16A0,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.3.1.9.4.523,HPN-ICF-ENTITY-VENDORTYPE-OID-MIB::hpnicfevtModuleSw-LSD1GT16A0,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.3.1.9.4.524,HPN-ICF-ENTITY-VENDORTYPE-OID-MIB::hpnicfevtModuleSw-LSD1XP2A0,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.3.1.9.4.525,HPN-ICF-ENTITY-VENDORTYPE-OID-MIB::hpnicfevtModuleSw-LSD1EP2A0,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.3.1.9.4.526,HPN-ICF-ENTITY-VENDORTYPE-OID-MIB::hpnicfevtModuleSw-LSD1RP2A0,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.3.1.9.4.527,HPN-ICF-ENTITY-VENDORTYPE-OID-MIB::hpnicfevtModuleSw-LSQ1GV48SC,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.3.1.9.4.528,HPN-ICF-ENTITY-VENDORTYPE-OID-MIB::hpnicfevtModuleSw-LSQ1FP48SA,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.3.1.9.4.529,HPN-ICF-ENTITY-VENDORTYPE-OID-MIB::hpnicfevtModuleSw-LSQ1GP24SC,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.3.1.9.4.530,HPN-ICF-ENTITY-VENDORTYPE-OID-MIB::hpnicfevtModuleSw-LSQ1GT24SC,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.3.1.9.4.531,HPN-ICF-ENTITY-VENDORTYPE-OID-MIB::hpnicfevtModuleSw-LSQ1TGX2SC,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.3.1.9.4.532,HPN-ICF-ENTITY-VENDORTYPE-OID-MIB::hpnicfevtModuleSw-LSQ1GP12EA,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.3.1.9.4.533,HPN-ICF-ENTITY-VENDORTYPE-OID-MIB::hpnicfevtModuleSw-LSQ1TGX1EA,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.3.1.9.4.534,HPN-ICF-ENTITY-VENDORTYPE-OID-MIB::hpnicfevtModuleSw-LSQ1P24XGSC,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.3.1.9.4.535,HPN-ICF-ENTITY-VENDORTYPE-OID-MIB::hpnicfevtModuleSw-LSQ1T24XGSC,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.3.1.9.4.536,HPN-ICF-ENTITY-VENDORTYPE-OID-MIB::hpnicfevtModuleSw-LS81TGX1B,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.3.1.9.4.537,HPN-ICF-ENTITY-VENDORTYPE-OID-MIB::hpnicfevtModuleSw-LSQ1PT4PSC0,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.3.1.9.4.538,HPN-ICF-ENTITY-VENDORTYPE-OID-MIB::hpnicfevtModuleSw-LS81SRPG13,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.3.1.9.4.539,HPN-ICF-ENTITY-VENDORTYPE-OID-MIB::hpnicfevtModuleSw-LS81SRPG14,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.3.1.9.4.540,HPN-ICF-ENTITY-VENDORTYPE-OID-MIB::hpnicfevtModuleSw-LS81SRPG15,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.3.1.9.4.541,HPN-ICF-ENTITY-VENDORTYPE-OID-MIB::hpnicfevtModuleSw-LSQ1GP48SC0,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.3.1.9.4.542,HPN-ICF-ENTITY-VENDORTYPE-OID-MIB::hpnicfevtModuleSw-LSQ1GP12SC0,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.3.1.9.4.543,HPN-ICF-ENTITY-VENDORTYPE-OID-MIB::hpnicfevtModuleSw-LSD1SRPA,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.3.1.9.4.544,HPN-ICF-ENTITY-VENDORTYPE-OID-MIB::hpnicfevtModuleSw-LSD1SRPB,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.3.1.9.4.545,HPN-ICF-ENTITY-VENDORTYPE-OID-MIB::hpnicfevtModuleSw-LSD1SRPC,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.3.1.9.4.546,HPN-ICF-ENTITY-VENDORTYPE-OID-MIB::hpnicfevtModuleSw-LSD1GT16PES0,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.3.1.9.4.547,HPN-ICF-ENTITY-VENDORTYPE-OID-MIB::hpnicfevtModuleSw-LSD1GP24ES0,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.3.1.9.4.548,HPN-ICF-ENTITY-VENDORTYPE-OID-MIB::hpnicfevtModuleSw-LSD1GT24XES0,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.3.1.9.4.549,HPN-ICF-ENTITY-VENDORTYPE-OID-MIB::hpnicfevtModuleSw-LSD1GP24XES0,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.3.1.9.4.550,HPN-ICF-ENTITY-VENDORTYPE-OID-MIB::hpnicfevtModuleSw-LSD1XP2ES0,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.3.1.9.4.551,HPN-ICF-ENTITY-VENDORTYPE-OID-MIB::hpnicfevtModuleSw-LSD1GP48ES0,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.3.1.9.4.552,HPN-ICF-ENTITY-VENDORTYPE-OID-MIB::hpnicfevtModuleSw-LSQ1MPUA0,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.3.1.9.4.553,HPN-ICF-ENTITY-VENDORTYPE-OID-MIB::hpnicfevtModuleSw-LSQ1MPUA1,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.3.1.9.4.554,HPN-ICF-ENTITY-VENDORTYPE-OID-MIB::hpnicfevtModuleSw-LSQ1FWBSC0,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.3.1.9.4.555,HPN-ICF-ENTITY-VENDORTYPE-OID-MIB::hpnicfevtModuleSw-LSQ1PT8PSC0,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.3.1.9.4.556,HPN-ICF-ENTITY-VENDORTYPE-OID-MIB::hpnicfevtModuleSw-LSQ1PT16PSC0,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.3.1.9.4.557,HPN-ICF-ENTITY-VENDORTYPE-OID-MIB::hpnicfevtModuleSw-SA11MPUA0,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.3.1.9.4.558,HPN-ICF-ENTITY-VENDORTYPE-OID-MIB::hpnicfevtModuleSw-SA11MPUB0,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.3.1.9.4.559,HPN-ICF-ENTITY-VENDORTYPE-OID-MIB::hpnicfevtModuleSw-LSQ1AFCBSC0,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.3.1.9.4.560,HPN-ICF-ENTITY-VENDORTYPE-OID-MIB::hpnicfevtModuleSw-LSQ1MPUB0,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.3.1.9.4.561,HPN-ICF-ENTITY-VENDORTYPE-OID-MIB::hpnicfevtModuleSw-LSQ1MPUB1,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.3.1.9.4.562,HPN-ICF-ENTITY-VENDORTYPE-OID-MIB::hpnicfevtModuleSw-LSQ1PT4PSC1,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.3.1.9.4.563,HPN-ICF-ENTITY-VENDORTYPE-OID-MIB::hpnicfevtModuleSw-LSQ1PT8PSC1,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.3.1.9.4.564,HPN-ICF-ENTITY-VENDORTYPE-OID-MIB::hpnicfevtModuleSw-LSQ1PT16PSC1,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.3.1.9.4.565,HPN-ICF-ENTITY-VENDORTYPE-OID-MIB::hpnicfevtModuleSw-LSQ1FP48USA0,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.3.1.9.4.566,HPN-ICF-ENTITY-VENDORTYPE-OID-MIB::hpnicfevtModuleSw-LSQ1FP48USA1,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.3.1.9.4.567,HPN-ICF-ENTITY-VENDORTYPE-OID-MIB::hpnicfevtModuleSw-LSQ1FV48USA0,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.3.1.9.4.568,HPN-ICF-ENTITY-VENDORTYPE-OID-MIB::hpnicfevtModuleSw-LSQ1FV48USA1,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.3.1.9.4.569,HPN-ICF-ENTITY-VENDORTYPE-OID-MIB::hpnicfevtModuleSw-LSQ1SRPD0,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.3.1.9.4.570,HPN-ICF-ENTITY-VENDORTYPE-OID-MIB::hpnicfevtModuleSw-LSQ1CGP24TSC0,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.3.1.9.4.571,HPN-ICF-ENTITY-VENDORTYPE-OID-MIB::hpnicfevtModuleSw-LSQ1GP24TSC0,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.3.1.9.4.572,HPN-ICF-ENTITY-VENDORTYPE-OID-MIB::hpnicfevtModuleSw-LSQ1ACGASC0,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.3.1.9.4.573,HPN-ICF-ENTITY-VENDORTYPE-OID-MIB::hpnicfevtModuleSw-LSD1XP1ES0,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.3.1.9.4.574,HPN-ICF-ENTITY-VENDORTYPE-OID-MIB::hpnicfevtModuleSw-LSD1GP12ES0,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.3.1.9.4.575,HPN-ICF-ENTITY-VENDORTYPE-OID-MIB::hpnicfevtModuleSw-LSQ1SRP12GB0,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.3.1.9.4.576,HPN-ICF-ENTITY-VENDORTYPE-OID-MIB::hpnicfevtModuleSw-LSQ1GV40PSC0,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.3.1.9.4.577,HPN-ICF-ENTITY-VENDORTYPE-OID-MIB::hpnicfevtModuleSw-LSQ1FWBSC1,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.3.1.9.4.578,HPN-ICF-ENTITY-VENDORTYPE-OID-MIB::hpnicfevtModuleSw-LSQ1NSMSC0,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.3.1.9.4.579,HPN-ICF-ENTITY-VENDORTYPE-OID-MIB::hpnicfevtModuleSw-LSQ1NSMSC1,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.3.1.9.4.580,HPN-ICF-ENTITY-VENDORTYPE-OID-MIB::hpnicfevtModuleSw-LSQ1AFDBSC0,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.3.1.9.4.581,HPN-ICF-ENTITY-VENDORTYPE-OID-MIB::hpnicfevtModuleSw-LS81MPUB,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.3.1.9.4.582,HPN-ICF-ENTITY-VENDORTYPE-OID-MIB::hpnicfevtModuleSw-LS81FP48XL,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.3.1.9.4.583,HPN-ICF-ENTITY-VENDORTYPE-OID-MIB::hpnicfevtModuleSw-LS81FT48XL,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.3.1.9.4.584,HPN-ICF-ENTITY-VENDORTYPE-OID-MIB::hpnicfevtModuleSw-LS81GP12XL,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.3.1.9.4.585,HPN-ICF-ENTITY-VENDORTYPE-OID-MIB::hpnicfevtModuleSw-LS81GP24XL,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.3.1.9.4.586,HPN-ICF-ENTITY-VENDORTYPE-OID-MIB::hpnicfevtModuleSw-LS81GP48XL,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.3.1.9.4.587,HPN-ICF-ENTITY-VENDORTYPE-OID-MIB::hpnicfevtModuleSw-LS81GT24XL,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.3.1.9.4.588,HPN-ICF-ENTITY-VENDORTYPE-OID-MIB::hpnicfevtModuleSw-LS81GT48XL,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.3.1.9.4.589,HPN-ICF-ENTITY-VENDORTYPE-OID-MIB::hpnicfevtModuleSw-LS81TGX2XL,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.3.1.9.4.590,HPN-ICF-ENTITY-VENDORTYPE-OID-MIB::hpnicfevtModuleSw-LSQ1GV48SD0,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.3.1.9.4.591,HPN-ICF-ENTITY-VENDORTYPE-OID-MIB::hpnicfevtModuleSw-LSQ1GP48EB0,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.3.1.9.4.592,HPN-ICF-ENTITY-VENDORTYPE-OID-MIB::hpnicfevtModuleSw-LSQ1IPSSC0,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.3.1.9.4.593,HPN-ICF-ENTITY-VENDORTYPE-OID-MIB::hpnicfevtModuleSw-LSQ1GV48SD1,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.3.1.9.4.594,HPN-ICF-ENTITY-VENDORTYPE-OID-MIB::hpnicfevtModuleSw-LSQ1GP48SD0,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.3.1.9.4.595,HPN-ICF-ENTITY-VENDORTYPE-OID-MIB::hpnicfevtModuleSw-LSQ1GP48SD1,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.3.1.9.4.596,HPN-ICF-ENTITY-VENDORTYPE-OID-MIB::hpnicfevtModuleSw-LSQ1SRPA0,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.3.1.9.4.597,HPN-ICF-ENTITY-VENDORTYPE-OID-MIB::hpnicfevtModuleSw-LSQ1SRPA1,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.3.1.9.4.598,HPN-ICF-ENTITY-VENDORTYPE-OID-MIB::hpnicfevtModuleSw-LSQ2FP48SA0,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.3.1.9.4.599,HPN-ICF-ENTITY-VENDORTYPE-OID-MIB::hpnicfevtModuleSw-LSQ2FP48SA1,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.3.1.9.4.600,HPN-ICF-ENTITY-VENDORTYPE-OID-MIB::hpnicfevtModuleSw-LSQ2FT48SA0,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.3.1.9.4.601,HPN-ICF-ENTITY-VENDORTYPE-OID-MIB::hpnicfevtModuleSw-LSQ2FT48SA1,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.3.1.9.4.602,HPN-ICF-ENTITY-VENDORTYPE-OID-MIB::hpnicfevtModuleSw-LSQ1GV24PSC0,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.3.1.9.4.603,HPN-ICF-ENTITY-VENDORTYPE-OID-MIB::hpnicfevtModuleSw-LSQ1GV24PSC1,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.3.1.9.4.604,HPN-ICF-ENTITY-VENDORTYPE-OID-MIB::hpnicfevtModuleSw-LSQ1CGV24PSC0,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.3.1.9.4.605,HPN-ICF-ENTITY-VENDORTYPE-OID-MIB::hpnicfevtModuleSw-LSQ1CGV24PSC1,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.3.1.9.4.606,HPN-ICF-ENTITY-VENDORTYPE-OID-MIB::hpnicfevtModuleSw-LSQ1GP24TEB0,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.3.1.9.4.607,HPN-ICF-ENTITY-VENDORTYPE-OID-MIB::hpnicfevtModuleSw-LSQ1GP24TEB1,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.3.1.9.4.608,HPN-ICF-ENTITY-VENDORTYPE-OID-MIB::hpnicfevtModuleSw-LSQ1GP24TSD0,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.3.1.9.4.609,HPN-ICF-ENTITY-VENDORTYPE-OID-MIB::hpnicfevtModuleSw-LSQ1GP24TSD1,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.3.1.9.4.610,HPN-ICF-ENTITY-VENDORTYPE-OID-MIB::hpnicfevtModuleSw-LSQ1GP24TXSD0,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.3.1.9.4.611,HPN-ICF-ENTITY-VENDORTYPE-OID-MIB::hpnicfevtModuleSw-LSQ1GP24TXSD1,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.3.1.9.4.612,HPN-ICF-ENTITY-VENDORTYPE-OID-MIB::hpnicfevtModuleSw-LSQ1TGX2EB0,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.3.1.9.4.613,HPN-ICF-ENTITY-VENDORTYPE-OID-MIB::hpnicfevtModuleSw-LSQ1TGX2EB1,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.3.1.9.4.614,HPN-ICF-ENTITY-VENDORTYPE-OID-MIB::hpnicfevtModuleSw-LSQ1TGX2SD0,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.3.1.9.4.615,HPN-ICF-ENTITY-VENDORTYPE-OID-MIB::hpnicfevtModuleSw-LSQ1TGX2SD1,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.3.1.9.4.616,HPN-ICF-ENTITY-VENDORTYPE-OID-MIB::hpnicfevtModuleSw-LSQ1TGX4SD0,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.3.1.9.4.617,HPN-ICF-ENTITY-VENDORTYPE-OID-MIB::hpnicfevtModuleSw-LSQ1TGX4SD1,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.3.1.9.4.618,HPN-ICF-ENTITY-VENDORTYPE-OID-MIB::hpnicfevtModuleSw-LSQ1TGX8SD0,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.3.1.9.4.619,HPN-ICF-ENTITY-VENDORTYPE-OID-MIB::hpnicfevtModuleSw-LSQ1TGX8SD1,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.3.1.9.4.620,HPN-ICF-ENTITY-VENDORTYPE-OID-MIB::hpnicfevtModuleSw-LSQ1GP48EB1,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.3.1.9.4.621,HPN-ICF-ENTITY-VENDORTYPE-OID-MIB::hpnicfevtModuleSw-LSQ1TGX4EB0,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.3.1.9.4.622,HPN-ICF-ENTITY-VENDORTYPE-OID-MIB::hpnicfevtModuleSw-LSQ1TGX4EB1,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.3.1.9.4.623,HPN-ICF-ENTITY-VENDORTYPE-OID-MIB::hpnicfevtModuleSw-LSQ1GP12SC3,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.3.1.9.4.624,HPN-ICF-ENTITY-VENDORTYPE-OID-MIB::hpnicfevtModuleSw-LSQ1GP24TSC3,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.3.1.9.4.625,HPN-ICF-ENTITY-VENDORTYPE-OID-MIB::hpnicfevtModuleSw-LSQ1GP48SC3,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.3.1.9.4.626,HPN-ICF-ENTITY-VENDORTYPE-OID-MIB::hpnicfevtModuleSw-LSQ1GV48SC3,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.3.1.9.4.627,HPN-ICF-ENTITY-VENDORTYPE-OID-MIB::hpnicfevtModuleSw-LSQ1MPUA3,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.3.1.9.4.628,HPN-ICF-ENTITY-VENDORTYPE-OID-MIB::hpnicfevtModuleSw-LSQ1SRP1CB3,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.3.1.9.4.629,HPN-ICF-ENTITY-VENDORTYPE-OID-MIB::hpnicfevtModuleSw-LSQ1SRPA3,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.3.1.9.4.630,HPN-ICF-ENTITY-VENDORTYPE-OID-MIB::hpnicfevtModuleSw-LSQ2FP48SA3,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.3.1.9.4.631,HPN-ICF-ENTITY-VENDORTYPE-OID-MIB::hpnicfevtModuleSw-LSQ2FT48SA3,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.3.1.9.4.632,HPN-ICF-ENTITY-VENDORTYPE-OID-MIB::hpnicfevtModuleSw-LSQ1MPUB3,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.3.1.9.4.633,HPN-ICF-ENTITY-VENDORTYPE-OID-MIB::hpnicfevtModuleSw-LSQ1CGP24TSC3,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.3.1.9.4.634,HPN-ICF-ENTITY-VENDORTYPE-OID-MIB::hpnicfevtModuleSw-LSQ1MPUB4,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.3.1.9.4.635,HPN-ICF-ENTITY-VENDORTYPE-OID-MIB::hpnicfevtModuleSw-LSQ1SRPD4,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.3.1.9.4.636,HPN-ICF-ENTITY-VENDORTYPE-OID-MIB::hpnicfevtModuleSw-LSQ1SSLSC0,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.3.1.9.4.637,HPN-ICF-ENTITY-VENDORTYPE-OID-MIB::hpnicfevtModuleSw-LSQ1LBSC0,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.3.1.9.4.638,HPN-ICF-ENTITY-VENDORTYPE-OID-MIB::hpnicfevtModuleSw-LSQ1NAT24SC0,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.3.1.9.4.639,HPN-ICF-ENTITY-VENDORTYPE-OID-MIB::hpnicfevtModuleSw-LSQ1SRP12GB4,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.3.1.9.4.640,HPN-ICF-ENTITY-VENDORTYPE-OID-MIB::hpnicfevtModuleSw-LSQ1TGS8SC0,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.3.1.9.4.641,HPN-ICF-ENTITY-VENDORTYPE-OID-MIB::hpnicfevtModuleSw-LSQ3PT4PSC0,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.3.1.9.4.642,HPN-ICF-ENTITY-VENDORTYPE-OID-MIB::hpnicfevtModuleSw-EWPXM2MPUB0,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.3.1.9.4.643,HPN-ICF-ENTITY-VENDORTYPE-OID-MIB::hpnicfevtModuleSw-EWPXM2SRP12GB0,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.3.1.9.4.644,HPN-ICF-ENTITY-VENDORTYPE-OID-MIB::hpnicfevtModuleSw-EWPXM2SRPD0,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.3.1.9.4.645,HPN-ICF-ENTITY-VENDORTYPE-OID-MIB::hpnicfevtModuleSw-EWPXM2GP24TSD0,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.3.1.9.4.646,HPN-ICF-ENTITY-VENDORTYPE-OID-MIB::hpnicfevtModuleSw-EWPXM2GP24TXSD0,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.3.1.9.4.647,HPN-ICF-ENTITY-VENDORTYPE-OID-MIB::hpnicfevtModuleSw-EWPXM2TGX4SD0,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.3.1.9.4.648,HPN-ICF-ENTITY-VENDORTYPE-OID-MIB::hpnicfevtModuleSw-EWPXM2GP48SD0,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.3.1.9.4.649,HPN-ICF-ENTITY-VENDORTYPE-OID-MIB::hpnicfevtModuleSw-EWPXM2GP24TSC0,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.3.1.9.4.650,HPN-ICF-ENTITY-VENDORTYPE-OID-MIB::hpnicfevtModuleSw-EWPXM2TGX2SC0,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.3.1.9.4.651,HPN-ICF-ENTITY-VENDORTYPE-OID-MIB::hpnicfevtModuleSw-EWPXM2GP48SC0,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.3.1.9.4.652,HPN-ICF-ENTITY-VENDORTYPE-OID-MIB::hpnicfevtModuleSw-LS7500-GP48-SC,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.3.1.9.4.653,HPN-ICF-ENTITY-VENDORTYPE-OID-MIB::hpnicfevtModuleSw-LS7500-GP48-SD,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.3.1.9.4.654,HPN-ICF-ENTITY-VENDORTYPE-OID-MIB::hpnicfevtModuleSw-LS7500-GT48-SC,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.3.1.9.4.655,HPN-ICF-ENTITY-VENDORTYPE-OID-MIB::hpnicfevtModuleSw-LS7500-GT48-SD,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.3.1.9.4.656,HPN-ICF-ENTITY-VENDORTYPE-OID-MIB::hpnicfevtModuleSw-LS7500-SRPG1,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.3.1.9.4.657,HPN-ICF-ENTITY-VENDORTYPE-OID-MIB::hpnicfevtModuleSw-LS7500-SRPG2,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.3.1.9.4.658,HPN-ICF-ENTITY-VENDORTYPE-OID-MIB::hpnicfevtModuleSw-LS7500-XP4-SD,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.3.1.9.4.659,HPN-ICF-ENTITY-VENDORTYPE-OID-MIB::hpnicfevtModuleSw-LS7500-XP8-SD,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.3.1.9.4.660,HPN-ICF-ENTITY-VENDORTYPE-OID-MIB::hpnicfevtModuleSw-LSQ4PT4PSC0,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.3.1.9.4.661,HPN-ICF-ENTITY-VENDORTYPE-OID-MIB::hpnicfevtModuleSw-LSQ4PT8PSC0,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.3.1.9.4.662,HPN-ICF-ENTITY-VENDORTYPE-OID-MIB::hpnicfevtModuleSw-LSQ4PT16PSC0,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.3.1.9.4.663,HPN-ICF-ENTITY-VENDORTYPE-OID-MIB::hpnicfevtModuleSw-LSQ1GP24TSA0,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.3.1.9.4.664,HPN-ICF-ENTITY-VENDORTYPE-OID-MIB::hpnicfevtModuleSw-LSQ1GV24PSA0,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.3.1.9.4.665,HPN-ICF-ENTITY-VENDORTYPE-OID-MIB::hpnicfevtModuleSw-LSQ1SRPD3,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.3.1.9.4.666,HPN-ICF-ENTITY-VENDORTYPE-OID-MIB::hpnicfevtModuleSw-LSQ1SUPA0,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.3.1.9.4.667,HPN-ICF-ENTITY-VENDORTYPE-OID-MIB::hpnicfevtModuleSw-LSU1FAB04A0,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.3.1.9.4.668,HPN-ICF-ENTITY-VENDORTYPE-OID-MIB::hpnicfevtModuleSw-LSU1FAB08A0,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.3.1.9.4.669,HPN-ICF-ENTITY-VENDORTYPE-OID-MIB::hpnicfevtModuleSw-LSU1TGS8EA0,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.3.1.9.4.670,HPN-ICF-ENTITY-VENDORTYPE-OID-MIB::hpnicfevtModuleSw-LSU1TGS8EB0,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.3.1.9.4.671,HPN-ICF-ENTITY-VENDORTYPE-OID-MIB::hpnicfevtModuleSw-LSU1TGS8SE0,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.3.1.9.4.672,HPN-ICF-ENTITY-VENDORTYPE-OID-MIB::hpnicfevtModuleSw-LSUTGS16SC0,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.3.1.9.4.673,HPN-ICF-ENTITY-VENDORTYPE-OID-MIB::hpnicfevtModuleSw-LSU1SUPA0,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.3.1.9.4.674,HPN-ICF-ENTITY-VENDORTYPE-OID-MIB::hpnicfevtModuleSw-LSU1GP24TXEA0,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.3.1.9.4.675,HPN-ICF-ENTITY-VENDORTYPE-OID-MIB::hpnicfevtModuleSw-LSU1GP24TXEB0,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.3.1.9.4.676,HPN-ICF-ENTITY-VENDORTYPE-OID-MIB::hpnicfevtModuleSw-LSU1GP24TXSE0,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.3.1.9.4.677,HPN-ICF-ENTITY-VENDORTYPE-OID-MIB::hpnicfevtModuleSw-LSU1GP48EA0,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.3.1.9.4.678,HPN-ICF-ENTITY-VENDORTYPE-OID-MIB::hpnicfevtModuleSw-LSU1GP48EB0,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.3.1.9.4.679,HPN-ICF-ENTITY-VENDORTYPE-OID-MIB::hpnicfevtModuleSw-LSU1GP48SE0,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.3.1.9.4.680,HPN-ICF-ENTITY-VENDORTYPE-OID-MIB::hpnicfevtModuleSw-LSU1GT48EA0,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.3.1.9.4.681,HPN-ICF-ENTITY-VENDORTYPE-OID-MIB::hpnicfevtModuleSw-LSU1GT48SE0,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.3.1.9.4.682,HPN-ICF-ENTITY-VENDORTYPE-OID-MIB::hpnicfevtModuleSw-LSU1TGX4EA0,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.3.1.9.4.683,HPN-ICF-ENTITY-VENDORTYPE-OID-MIB::hpnicfevtModuleSw-LSU1TGX4EB0,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.3.1.9.4.684,HPN-ICF-ENTITY-VENDORTYPE-OID-MIB::hpnicfevtModuleSw-LSU1TGX4SE0,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.3.1.9.4.685,HPN-ICF-ENTITY-VENDORTYPE-OID-MIB::hpnicfevtModuleSw-LSQ1FAB08A0,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.3.1.9.4.686,HPN-ICF-ENTITY-VENDORTYPE-OID-MIB::hpnicfevtModuleSw-EWPX2WCMD0,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.3.1.9.4.687,HPN-ICF-ENTITY-VENDORTYPE-OID-MIB::hpnicfevtModuleSw-LSQ1WCMD0,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.3.1.9.4.688,HPN-ICF-ENTITY-VENDORTYPE-OID-MIB::hpnicfevtModuleSw-LSQ1IAGSC0,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.3.1.9.4.689,HPN-ICF-ENTITY-VENDORTYPE-OID-MIB::hpnicfevtModuleSw-LSU1GP24TSE0,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.3.1.9.4.690,HPN-ICF-ENTITY-VENDORTYPE-OID-MIB::hpnicfevtModuleSw-LSQ1TGS16SC0,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.3.1.9.4.691,HPN-ICF-ENTITY-VENDORTYPE-OID-MIB::hpnicfevtModuleSw-EWPX2TGS16SC0,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.3.1.9.4.692,HPN-ICF-ENTITY-VENDORTYPE-OID-MIB::hpnicfevtModuleSw-LSQ1SUPA3,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.3.1.9.4.693,HPN-ICF-ENTITY-VENDORTYPE-OID-MIB::hpnicfevtModuleSw-LSQ1FAB04A3,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.3.1.9.4.694,HPN-ICF-ENTITY-VENDORTYPE-OID-MIB::hpnicfevtModuleSw-LSQ1FAB08A3,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.3.1.9.4.695,HPN-ICF-ENTITY-VENDORTYPE-OID-MIB::hpnicfevtModuleSw-LSQ1GT48SC0,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.3.1.9.4.696,HPN-ICF-ENTITY-VENDORTYPE-OID-MIB::hpnicfevtModuleSw-LSR2SRP2C1,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.3.1.9.4.697,HPN-ICF-ENTITY-VENDORTYPE-OID-MIB::hpnicfevtModuleSw-LSR2SRP2C2,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.3.1.9.4.701,HPN-ICF-ENTITY-VENDORTYPE-OID-MIB::hpnicfevtModuleSw-1000BASE-X-COMBO,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.3.1.9.4.702,HPN-ICF-ENTITY-VENDORTYPE-OID-MIB::hpnicfevtModuleSw-EPON-1000M,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.3.1.9.4.703,HPN-ICF-ENTITY-VENDORTYPE-OID-MIB::hpnicfevtModuleSw-1000BASE-FIXED-2SFP-T-2RJ45,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.3.1.9.4.704,HPN-ICF-ENTITY-VENDORTYPE-OID-MIB::hpnicfevtModuleSw-100M-1550-BIDI,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.3.1.9.4.705,HPN-ICF-ENTITY-VENDORTYPE-OID-MIB::hpnicfevtModuleSw-100M-1310-BIDI,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.3.1.9.4.706,HPN-ICF-ENTITY-VENDORTYPE-OID-MIB::hpnicfevtModuleSw-1000BASE-FIXED-4RJ45-4SFP-COMBO,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.3.1.9.4.707,HPN-ICF-ENTITY-VENDORTYPE-OID-MIB::hpnicfevtModuleSw-LSH1PK2T,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.3.1.9.4.708,HPN-ICF-ENTITY-VENDORTYPE-OID-MIB::hpnicfevtModuleSw-LSPM2GP2P,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.3.1.9.4.709,HPN-ICF-ENTITY-VENDORTYPE-OID-MIB::hpnicfevtModuleSw-LSWM1GT16P,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.3.1.9.4.710,HPN-ICF-ENTITY-VENDORTYPE-OID-MIB::hpnicfevtModuleSw-LSWM1GP16P,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.3.1.9.4.711,HPN-ICF-ENTITY-VENDORTYPE-OID-MIB::hpnicfevtModuleSw-LSWM1XP2P,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.3.1.9.4.712,HPN-ICF-ENTITY-VENDORTYPE-OID-MIB::hpnicfevtModuleSw-LSWM1XP4P,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.3.1.9.4.713,HPN-ICF-ENTITY-VENDORTYPE-OID-MIB::hpnicfevtModuleSw-LSWM1SP2P,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.3.1.9.4.714,HPN-ICF-ENTITY-VENDORTYPE-OID-MIB::hpnicfevtModuleSw-LSWM1SP4P,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.3.1.9.4.715,HPN-ICF-ENTITY-VENDORTYPE-OID-MIB::hpnicfevtModuleSw-LSWM148POEM,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.3.1.9.4.716,HPN-ICF-ENTITY-VENDORTYPE-OID-MIB::hpnicfevtModuleSw-LSWM1FW10,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.3.1.9.4.717,HPN-ICF-ENTITY-VENDORTYPE-OID-MIB::hpnicfevtModuleSw-LSWM1WCM10,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.3.1.9.4.718,HPN-ICF-ENTITY-VENDORTYPE-OID-MIB::hpnicfevtModuleSw-LSWM1IPS10,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.3.1.9.4.719,HPN-ICF-ENTITY-VENDORTYPE-OID-MIB::hpnicfevtModuleSw-LSWM1WCM20,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.3.1.9.4.720,HPN-ICF-ENTITY-VENDORTYPE-OID-MIB::hpnicfevtModuleSw-IPS-T1000-M,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.3.1.9.4.721,HPN-ICF-ENTITY-VENDORTYPE-OID-MIB::hpnicfevtModuleSw-IPS-T1000-A,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.3.1.9.4.722,HPN-ICF-ENTITY-VENDORTYPE-OID-MIB::hpnicfevtModuleSw-IPS-T1000-S,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.3.1.9.4.723,HPN-ICF-ENTITY-VENDORTYPE-OID-MIB::hpnicfevtModuleSw-IPS-GX4C,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.3.1.9.4.724,HPN-ICF-ENTITY-VENDORTYPE-OID-MIB::hpnicfevtModuleSw-IPS-GT4C,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.3.1.9.4.725,HPN-ICF-ENTITY-VENDORTYPE-OID-MIB::hpnicfevtModuleSw-LSPM2SP2P,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.3.1.9.4.726,HPN-ICF-ENTITY-VENDORTYPE-OID-MIB::hpnicfevtModuleSw-LSPM2SP2PA,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.3.1.9.4.727,HPN-ICF-ENTITY-VENDORTYPE-OID-MIB::hpnicfevtModuleSw-LSP5GP8P,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.3.1.9.4.728,HPN-ICF-ENTITY-VENDORTYPE-OID-MIB::hpnicfevtModuleSw-LSP5GT8P,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.3.1.9.4.729,HPN-ICF-ENTITY-VENDORTYPE-OID-MIB::hpnicfevtModuleSw-LSWM1FC4P,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.3.1.9.4.730,HPN-ICF-ENTITY-VENDORTYPE-OID-MIB::hpnicfevtModuleSw-LSW1XGT4P0,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.3.1.9.4.731,HPN-ICF-ENTITY-VENDORTYPE-OID-MIB::hpnicfevtModuleSw-LSW1XGT2P0,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.3.1.9.4.732,HPN-ICF-ENTITY-VENDORTYPE-OID-MIB::hpnicfevtModuleSw-LSP1XGT2P,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.3.1.9.4.733,HPN-ICF-ENTITY-VENDORTYPE-OID-MIB::hpnicfevtModuleSw-LSPM3XGT2P,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.3.1.9.4.734,HPN-ICF-ENTITY-VENDORTYPE-OID-MIB::hpnicfevtModuleSw-LSWM2QP2P,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.3.1.9.4.735,HPN-ICF-ENTITY-VENDORTYPE-OID-MIB::hpnicfevtModuleSw-LSWM2XGT2PM,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.3.1.9.4.736,HPN-ICF-ENTITY-VENDORTYPE-OID-MIB::hpnicfevtModuleSw-LSWM2SP2PM,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.3.1.9.4.737,HPN-ICF-ENTITY-VENDORTYPE-OID-MIB::hpnicfevtModuleSw-LSWM2SP8PM,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.3.1.9.4.738,HPN-ICF-ENTITY-VENDORTYPE-OID-MIB::hpnicfevtModuleSw-LSWM2SP8P,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.3.1.9.4.739,HPN-ICF-ENTITY-VENDORTYPE-OID-MIB::hpnicfevtModuleSw-LSWM2XGT8PM,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.3.1.9.4.740,HPN-ICF-ENTITY-VENDORTYPE-OID-MIB::hpnicfevtModuleSw-LSWM18QC,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.3.1.9.4.741,HPN-ICF-ENTITY-VENDORTYPE-OID-MIB::hpnicfevtModuleSw-LSWM124XG2Q,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.3.1.9.4.742,HPN-ICF-ENTITY-VENDORTYPE-OID-MIB::hpnicfevtModuleSw-LSWM124XGT2Q,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.3.1.9.4.743,HPN-ICF-ENTITY-VENDORTYPE-OID-MIB::hpnicfevtModuleSw-LSWM124XG2QL,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.3.1.9.4.800,HPN-ICF-ENTITY-VENDORTYPE-OID-MIB::hpnicfevtModuleSw-WX5002MPU,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.3.1.9.4.801,HPN-ICF-ENTITY-VENDORTYPE-OID-MIB::hpnicfevtModuleSw-LS8M1WCMA,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.3.1.9.4.802,HPN-ICF-ENTITY-VENDORTYPE-OID-MIB::hpnicfevtModuleSw-EWPX1G24XA0,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.3.1.9.4.803,HPN-ICF-ENTITY-VENDORTYPE-OID-MIB::hpnicfevtModuleSw-LSQ1WCMB0,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.3.1.9.4.804,HPN-ICF-ENTITY-VENDORTYPE-OID-MIB::hpnicfevtModuleSw-LSB1WCM2A0,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.3.1.9.4.805,HPN-ICF-ENTITY-VENDORTYPE-OID-MIB::hpnicfevtModuleSw-EWPX1WCMB0,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.3.1.9.4.806,HPN-ICF-ENTITY-VENDORTYPE-OID-MIB::hpnicfevtModuleSw-EWPX1G24XC0,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.3.1.9.4.807,HPN-ICF-ENTITY-VENDORTYPE-OID-MIB::hpnicfevtModuleSw-EWPX1WCMC0,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.3.1.9.4.808,HPN-ICF-ENTITY-VENDORTYPE-OID-MIB::hpnicfevtModuleSw-EWPX1FWA0,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.3.1.9.4.809,HPN-ICF-ENTITY-VENDORTYPE-OID-MIB::hpnicfevtModuleSw-EWPX1G10XC0,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.3.1.9.4.810,HPN-ICF-ENTITY-VENDORTYPE-OID-MIB::hpnicfevtModuleSw-EWPX1WCM10C0,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.3.1.9.4.811,HPN-ICF-ENTITY-VENDORTYPE-OID-MIB::hpnicfevtModuleSw-LSR1WCM2A1,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.3.1.9.4.812,HPN-ICF-ENTITY-VENDORTYPE-OID-MIB::hpnicfevtModuleSw-EWPX1WAP0,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.3.1.9.4.813,HPN-ICF-ENTITY-VENDORTYPE-OID-MIB::hpnicfevtModuleSw-EWPX1WCMD0,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.3.1.9.4.814,HPN-ICF-ENTITY-VENDORTYPE-OID-MIB::hpnicfevtModuleSw-EWPX1G24XCE0,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.3.1.9.4.815,HPN-ICF-ENTITY-VENDORTYPE-OID-MIB::hpnicfevtModuleSw-EWPX1WCMCE0,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.3.1.9.4.816,HPN-ICF-ENTITY-VENDORTYPE-OID-MIB::hpnicfevtModuleSw-EWPX1G24XD0,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.3.1.9.4.900,HPN-ICF-ENTITY-VENDORTYPE-OID-MIB::hpnicfevtModuleSw-LSR1DRSP2L1,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.3.1.9.4.901,HPN-ICF-ENTITY-VENDORTYPE-OID-MIB::hpnicfevtModuleSw-PIC-CLF2G8L,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.3.1.9.4.902,HPN-ICF-ENTITY-VENDORTYPE-OID-MIB::hpnicfevtModuleSw-PIC-CLF4G8L,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.3.1.9.4.903,HPN-ICF-ENTITY-VENDORTYPE-OID-MIB::hpnicfevtModuleSw-SR02SRP2F3,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.3.1.9.4.904,HPN-ICF-ENTITY-VENDORTYPE-OID-MIB::hpnicfevtModuleSw-SR02SRP1F3,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.3.1.9.4.905,HPN-ICF-ENTITY-VENDORTYPE-OID-MIB::hpnicfevtModuleSw-LST1GT48LEA1,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.3.1.9.4.906,HPN-ICF-ENTITY-VENDORTYPE-OID-MIB::hpnicfevtModuleSw-LST1GP48LEA1,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.3.1.9.4.907,HPN-ICF-ENTITY-VENDORTYPE-OID-MIB::hpnicfevtModuleSw-LST2XP8LEA1,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.3.1.9.4.908,HPN-ICF-ENTITY-VENDORTYPE-OID-MIB::hpnicfevtModuleSw-LST1GT48LEY1,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.3.1.9.4.909,HPN-ICF-ENTITY-VENDORTYPE-OID-MIB::hpnicfevtModuleSw-LST1GP48LEY1,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.3.1.9.4.910,HPN-ICF-ENTITY-VENDORTYPE-OID-MIB::hpnicfevtModuleSw-LST1XP32REY1,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.3.1.9.4.911,HPN-ICF-ENTITY-VENDORTYPE-OID-MIB::hpnicfevtModuleSw-LST1XP8LEY1,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.3.1.9.4.912,HPN-ICF-ENTITY-VENDORTYPE-OID-MIB::hpnicfevtModuleSw-LST1GP48LEZ1,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.3.1.9.4.913,HPN-ICF-ENTITY-VENDORTYPE-OID-MIB::hpnicfevtModuleSw-LST1XP8LEZ1,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.3.1.9.4.914,HPN-ICF-ENTITY-VENDORTYPE-OID-MIB::hpnicfevtModuleSw-IM-FW-II,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.3.1.9.4.915,HPN-ICF-ENTITY-VENDORTYPE-OID-MIB::hpnicfevtModuleSw-IM-IPS,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.3.1.9.4.916,HPN-ICF-ENTITY-VENDORTYPE-OID-MIB::hpnicfevtModuleSw-IM-SSL,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.3.1.9.4.917,HPN-ICF-ENTITY-VENDORTYPE-OID-MIB::hpnicfevtModuleSw-IM-LB,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.3.1.9.4.918,HPN-ICF-ENTITY-VENDORTYPE-OID-MIB::hpnicfevtModuleSw-IM-ACG,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.3.1.9.4.919,HPN-ICF-ENTITY-VENDORTYPE-OID-MIB::hpnicfevtModuleSw-LSR1XP16REC1,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.3.1.9.4.920,HPN-ICF-ENTITY-VENDORTYPE-OID-MIB::hpnicfevtModuleSw-LST2XP8LEB1,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.3.1.9.4.921,HPN-ICF-ENTITY-VENDORTYPE-OID-MIB::hpnicfevtModuleSw-LST2XP8LEC1,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.3.1.9.4.922,HPN-ICF-ENTITY-VENDORTYPE-OID-MIB::hpnicfevtModuleSw-LST2XP8LEF1,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.3.1.9.4.923,HPN-ICF-ENTITY-VENDORTYPE-OID-MIB::hpnicfevtModuleSw-LSR2XP4LEB1,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.3.1.9.4.924,HPN-ICF-ENTITY-VENDORTYPE-OID-MIB::hpnicfevtModuleSw-LSR2XP4LEC1,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.3.1.9.4.925,HPN-ICF-ENTITY-VENDORTYPE-OID-MIB::hpnicfevtModuleSw-LST2XP32REB1,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.3.1.9.4.926,HPN-ICF-ENTITY-VENDORTYPE-OID-MIB::hpnicfevtModuleSw-LST2XP32REC1,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.3.1.9.4.927,HPN-ICF-ENTITY-VENDORTYPE-OID-MIB::hpnicfevtModuleSw-LSR1WCM3A1,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.3.1.9.4.928,HPN-ICF-ENTITY-VENDORTYPE-OID-MIB::hpnicfevtModuleSw-LST1XP16LEB1,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.3.1.9.4.929,HPN-ICF-ENTITY-VENDORTYPE-OID-MIB::hpnicfevtModuleSw-LST1XP16LEC1,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.3.1.9.4.930,HPN-ICF-ENTITY-VENDORTYPE-OID-MIB::hpnicfevtModuleSw-CR-SPC-XP4L-E-I,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.3.1.9.4.931,HPN-ICF-ENTITY-VENDORTYPE-OID-MIB::hpnicfevtModuleSw-LST2MRPNC1,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.3.1.9.4.932,HPN-ICF-ENTITY-VENDORTYPE-OID-MIB::hpnicfevtModuleSw-LST2SF08C1,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.3.1.9.4.933,HPN-ICF-ENTITY-VENDORTYPE-OID-MIB::hpnicfevtModuleSw-LST2SF18C1,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.3.1.9.4.934,HPN-ICF-ENTITY-VENDORTYPE-OID-MIB::hpnicfevtModuleSw-SR02SRP2G3,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.3.1.9.4.935,HPN-ICF-ENTITY-VENDORTYPE-OID-MIB::hpnicfevtModuleSw-CR-SPE-3020-E-I,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.3.1.9.4.936,HPN-ICF-ENTITY-VENDORTYPE-OID-MIB::hpnicfevtModuleSw-CR-SPC-PUP4L-E-I,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.3.1.9.4.937,HPN-ICF-ENTITY-VENDORTYPE-OID-MIB::hpnicfevtModuleSw-CR-SPC-XP4LEF-I,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.3.1.9.4.938,HPN-ICF-ENTITY-VENDORTYPE-OID-MIB::hpnicfevtModuleSw-CR-SPC-XP8LEF-I,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.3.1.9.4.939,HPN-ICF-ENTITY-VENDORTYPE-OID-MIB::hpnicfevtModuleSw-LST3XP8LEB1,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.3.1.9.4.940,HPN-ICF-ENTITY-VENDORTYPE-OID-MIB::hpnicfevtModuleSw-LST3XP8LEC1,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.3.1.9.4.941,HPN-ICF-ENTITY-VENDORTYPE-OID-MIB::hpnicfevtModuleSw-LST1FW3A1,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.3.1.9.4.942,HPN-ICF-ENTITY-VENDORTYPE-OID-MIB::hpnicfevtModuleSw-CR-IM-NAM1A,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.3.1.9.4.943,HPN-ICF-ENTITY-VENDORTYPE-OID-MIB::hpnicfevtModuleSw-LSR2SRP2B1,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.3.1.9.4.944,HPN-ICF-ENTITY-VENDORTYPE-OID-MIB::hpnicfevtModuleSw-LSR2SRP2B2,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.3.1.9.4.945,HPN-ICF-ENTITY-VENDORTYPE-OID-MIB::hpnicfevtModuleSw-LSR2SRP2D1,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.3.1.9.4.946,HPN-ICF-ENTITY-VENDORTYPE-OID-MIB::hpnicfevtModuleSw-LST3XP8LEY1,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.3.1.9.4.947,HPN-ICF-ENTITY-VENDORTYPE-OID-MIB::hpnicfevtModuleSw-LST2XP32REY1,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.3.1.9.4.948,HPN-ICF-ENTITY-VENDORTYPE-OID-MIB::hpnicfevtModuleSw-LST1XP16LEY1,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.3.1.9.4.949,HPN-ICF-ENTITY-VENDORTYPE-OID-MIB::hpnicfevtModuleSw-SR0M2SRP2G3,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.3.1.9.4.950,HPN-ICF-ENTITY-VENDORTYPE-OID-MIB::hpnicfevtModuleSw-SR0M2SRP1G3,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.3.1.9.4.951,HPN-ICF-ENTITY-VENDORTYPE-OID-MIB::hpnicfevtModuleSw-SPC-GP48LA,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.3.1.9.4.952,HPN-ICF-ENTITY-VENDORTYPE-OID-MIB::hpnicfevtModuleSw-SPC-GT48LA,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.3.1.9.4.953,HPN-ICF-ENTITY-VENDORTYPE-OID-MIB::hpnicfevtModuleSw-SPC-XP4LA,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.3.1.9.4.954,HPN-ICF-ENTITY-VENDORTYPE-OID-MIB::hpnicfevtModuleSw-SPC-XP2LA,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.3.1.9.4.955,HPN-ICF-ENTITY-VENDORTYPE-OID-MIB::hpnicfevtModuleSw-SPC-GP24LA,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.3.1.9.4.956,HPN-ICF-ENTITY-VENDORTYPE-OID-MIB::hpnicfevtModuleSw-SPC-XP16RA,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.3.1.9.4.957,HPN-ICF-ENTITY-VENDORTYPE-OID-MIB::hpnicfevtModuleSw-CR-IM-FW1A,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.3.1.9.4.958,HPN-ICF-ENTITY-VENDORTYPE-OID-MIB::hpnicfevtModuleSw-SPC-XP16R,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.3.1.9.4.959,HPN-ICF-ENTITY-VENDORTYPE-OID-MIB::hpnicfevtModuleSw-CR-IM-LB1A,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.3.1.9.4.960,HPN-ICF-ENTITY-VENDORTYPE-OID-MIB::hpnicfevtModuleSw-LST1GT48LEC2,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.3.1.9.4.961,HPN-ICF-ENTITY-VENDORTYPE-OID-MIB::hpnicfevtModuleSw-LST1GP48LEC2,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.3.1.9.4.962,HPN-ICF-ENTITY-VENDORTYPE-OID-MIB::hpnicfevtModuleSw-LST1XP16LEC2,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.3.1.9.4.963,HPN-ICF-ENTITY-VENDORTYPE-OID-MIB::hpnicfevtModuleSw-LST2XP8LEC2,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.3.1.9.4.964,HPN-ICF-ENTITY-VENDORTYPE-OID-MIB::hpnicfevtModuleSw-LST2XP32REC2,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.3.1.9.4.965,HPN-ICF-ENTITY-VENDORTYPE-OID-MIB::hpnicfevtModuleSw-CR-IM-MAC1A,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.3.1.9.4.966,HPN-ICF-ENTITY-VENDORTYPE-OID-MIB::hpnicfevtModuleSw-LST1XP48LFD1,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.3.1.9.4.967,HPN-ICF-ENTITY-VENDORTYPE-OID-MIB::hpnicfevtModuleSw-LST1XP40RFD1,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.3.1.9.4.968,HPN-ICF-ENTITY-VENDORTYPE-OID-MIB::hpnicfevtModuleSw-LST1XP40RFG1,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.3.1.9.4.969,HPN-ICF-ENTITY-VENDORTYPE-OID-MIB::hpnicfevtModuleSw-LST1XLP16RFD1,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.3.1.9.4.970,HPN-ICF-ENTITY-VENDORTYPE-OID-MIB::hpnicfevtModuleSw-LST1CP4RFD1,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.3.1.9.4.971,HPN-ICF-ENTITY-VENDORTYPE-OID-MIB::hpnicfevtModuleSw-LST1CP4RFG1,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.3.1.9.4.972,HPN-ICF-ENTITY-VENDORTYPE-OID-MIB::hpnicfevtModuleSw-LST1SF08E1,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.3.1.9.4.973,HPN-ICF-ENTITY-VENDORTYPE-OID-MIB::hpnicfevtModuleSw-LST1SF18E1,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.3.1.9.4.974,HPN-ICF-ENTITY-VENDORTYPE-OID-MIB::hpnicfevtModuleSw-LST1MRPNE1,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.3.1.9.4.975,HPN-ICF-ENTITY-VENDORTYPE-OID-MIB::hpnicfevtModuleSw-LSX1CGX8FC0,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.3.1.9.4.976,HPN-ICF-ENTITY-VENDORTYPE-OID-MIB::hpnicfevtModuleSw-LSX1CGX8FC1,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.3.1.9.4.977,HPN-ICF-ENTITY-VENDORTYPE-OID-MIB::hpnicfevtModuleSw-LSX1QGS24FC0,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.3.1.9.4.978,HPN-ICF-ENTITY-VENDORTYPE-OID-MIB::hpnicfevtModuleSw-LSX1QGS24FC1,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.3.1.9.4.979,HPN-ICF-ENTITY-VENDORTYPE-OID-MIB::hpnicfevtModuleSw-LSX1TGS24FC0,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.3.1.9.4.980,HPN-ICF-ENTITY-VENDORTYPE-OID-MIB::hpnicfevtModuleSw-LSX1TGS24FC1,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.3.1.9.4.981,HPN-ICF-ENTITY-VENDORTYPE-OID-MIB::hpnicfevtModuleSw-LSX1TGS48FC0,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.3.1.9.4.982,HPN-ICF-ENTITY-VENDORTYPE-OID-MIB::hpnicfevtModuleSw-LSX1TGS48FC1,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.3.1.9.4.983,HPN-ICF-ENTITY-VENDORTYPE-OID-MIB::hpnicfevtModuleSw-LST1XP48LFD2,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.3.1.9.4.984,HPN-ICF-ENTITY-VENDORTYPE-OID-MIB::hpnicfevtModuleSw-LST1XP40RFD2,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.3.1.9.4.985,HPN-ICF-ENTITY-VENDORTYPE-OID-MIB::hpnicfevtModuleSw-LST1XP40RFG2,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.3.1.9.4.986,HPN-ICF-ENTITY-VENDORTYPE-OID-MIB::hpnicfevtModuleSw-LST1XLP16RFD2,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.3.1.9.4.987,HPN-ICF-ENTITY-VENDORTYPE-OID-MIB::hpnicfevtModuleSw-LST1CP4RFD2,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.3.1.9.4.988,HPN-ICF-ENTITY-VENDORTYPE-OID-MIB::hpnicfevtModuleSw-LST1CP4RFG2,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.3.1.9.4.989,HPN-ICF-ENTITY-VENDORTYPE-OID-MIB::hpnicfevtModuleSw-MPE-1004,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.3.1.9.4.990,HPN-ICF-ENTITY-VENDORTYPE-OID-MIB::hpnicfevtModuleSw-MIC-GP4L,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.3.1.9.4.991,HPN-ICF-ENTITY-VENDORTYPE-OID-MIB::hpnicfevtModuleSw-MIC-GP8L,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.3.1.9.4.992,HPN-ICF-ENTITY-VENDORTYPE-OID-MIB::hpnicfevtModuleSw-MIC-SP4L,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.3.1.9.4.993,HPN-ICF-ENTITY-VENDORTYPE-OID-MIB::hpnicfevtModuleSw-MIC-ET16L,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.3.1.9.4.994,HPN-ICF-ENTITY-VENDORTYPE-OID-MIB::hpnicfevtModuleSw-MIC-CLP4L,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.3.1.9.4.995,HPN-ICF-ENTITY-VENDORTYPE-OID-MIB::hpnicfevtModuleSw-MIC-CLP2L,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.3.1.9.4.996,HPN-ICF-ENTITY-VENDORTYPE-OID-MIB::hpnicfevtModuleSw-LST1IPS2A1,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.3.1.9.4.997,HPN-ICF-ENTITY-VENDORTYPE-OID-MIB::hpnicfevtModuleSw-SFC-04B,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.3.1.9.4.998,HPN-ICF-ENTITY-VENDORTYPE-OID-MIB::hpnicfevtModuleSw-SFC-04D,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.3.1.9.4.999,HPN-ICF-ENTITY-VENDORTYPE-OID-MIB::hpnicfevtModuleSw-SFC-08B,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.3.1.9.4.1000,HPN-ICF-ENTITY-VENDORTYPE-OID-MIB::hpnicfevtModuleSw-SFC-08D,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.3.1.9.4.1001,HPN-ICF-ENTITY-VENDORTYPE-OID-MIB::hpnicfevtModuleSw-SFC-12B,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.3.1.9.4.1002,HPN-ICF-ENTITY-VENDORTYPE-OID-MIB::hpnicfevtModuleSw-SFC-12D,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.3.1.9.4.1003,HPN-ICF-ENTITY-VENDORTYPE-OID-MIB::hpnicfevtModuleSw-SR05SRP1H1,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.3.1.9.4.1004,HPN-ICF-ENTITY-VENDORTYPE-OID-MIB::hpnicfevtModuleSw-SPC-GP24LA1,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.3.1.9.4.1005,HPN-ICF-ENTITY-VENDORTYPE-OID-MIB::hpnicfevtModuleSw-SPC-GP24XP2LA,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.3.1.9.4.1006,HPN-ICF-ENTITY-VENDORTYPE-OID-MIB::hpnicfevtModuleSw-SPC-GP48LA1,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.3.1.9.4.1007,HPN-ICF-ENTITY-VENDORTYPE-OID-MIB::hpnicfevtModuleSw-SPC-GP48LB,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.3.1.9.4.1008,HPN-ICF-ENTITY-VENDORTYPE-OID-MIB::hpnicfevtModuleSw-SPC-XP2LA1,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.3.1.9.4.1009,HPN-ICF-ENTITY-VENDORTYPE-OID-MIB::hpnicfevtModuleSw-SPC-XP4LA1,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.3.1.9.4.1010,HPN-ICF-ENTITY-VENDORTYPE-OID-MIB::hpnicfevtModuleSw-SPC-XP4LB,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.3.1.9.4.1011,HPN-ICF-ENTITY-VENDORTYPE-OID-MIB::hpnicfevtModuleSw-SPC-XP8LA,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.3.1.9.4.1012,HPN-ICF-ENTITY-VENDORTYPE-OID-MIB::hpnicfevtModuleSw-SPC-XP8LB,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.3.1.9.4.1013,HPN-ICF-ENTITY-VENDORTYPE-OID-MIB::hpnicfevtModuleSw-SPC-XP48LA,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.3.1.9.4.1014,HPN-ICF-ENTITY-VENDORTYPE-OID-MIB::hpnicfevtModuleSw-SPC-XLP8LA,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.3.1.9.4.1015,HPN-ICF-ENTITY-VENDORTYPE-OID-MIB::hpnicfevtModuleSw-SPC-GP24XP2LB,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.3.1.9.4.1016,HPN-ICF-ENTITY-VENDORTYPE-OID-MIB::hpnicfevtModuleSw-LST1MRPNE2,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.3.1.9.4.1017,HPN-ICF-ENTITY-VENDORTYPE-OID-MIB::hpnicfevtModuleSw-LST2FW3A1,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.3.1.9.4.1018,HPN-ICF-ENTITY-VENDORTYPE-OID-MIB::hpnicfevtModuleSw-LST1ADE1A1,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.3.1.9.4.1019,HPN-ICF-ENTITY-VENDORTYPE-OID-MIB::hpnicfevtModuleSw-CR-MRP-II,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.3.1.9.4.1020,HPN-ICF-ENTITY-VENDORTYPE-OID-MIB::hpnicfevtModuleSw-CR-SF08E,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.3.1.9.4.1021,HPN-ICF-ENTITY-VENDORTYPE-OID-MIB::hpnicfevtModuleSw-CR-SF18E,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.3.1.9.4.1022,HPN-ICF-ENTITY-VENDORTYPE-OID-MIB::hpnicfevtModuleSw-CR-SPC-XP40RC,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.3.1.9.4.1023,HPN-ICF-ENTITY-VENDORTYPE-OID-MIB::hpnicfevtModuleSw-CR-SPC-XP40RB,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.3.1.9.4.1024,HPN-ICF-ENTITY-VENDORTYPE-OID-MIB::hpnicfevtModuleSw-CR-SPC-CP4RC,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.3.1.9.4.1025,HPN-ICF-ENTITY-VENDORTYPE-OID-MIB::hpnicfevtModuleSw-LST1FW3C1,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.3.1.9.4.1026,HPN-ICF-ENTITY-VENDORTYPE-OID-MIB::hpnicfevtModuleSw-LSU1FWCEA0,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.3.1.9.4.1027,HPN-ICF-ENTITY-VENDORTYPE-OID-MIB::hpnicfevtModuleSw-SPC-GT48LA1,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.3.1.9.4.1028,HPN-ICF-ENTITY-VENDORTYPE-OID-MIB::hpnicfevtModuleSw-LST1XP20RFD1,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.3.1.9.4.1029,HPN-ICF-ENTITY-VENDORTYPE-OID-MIB::hpnicfevtModuleSw-LST1XP20RFD2,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.3.1.9.4.1030,HPN-ICF-ENTITY-VENDORTYPE-OID-MIB::hpnicfevtModuleSw-MPE-1104,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.3.1.9.4.1031,HPN-ICF-ENTITY-VENDORTYPE-OID-MIB::hpnicfevtModuleSw-SPEX-1204,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.3.1.9.4.1032,HPN-ICF-ENTITY-VENDORTYPE-OID-MIB::hpnicfevtModuleSw-SPC-GP44XP4LCX,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.3.1.9.4.1033,HPN-ICF-ENTITY-VENDORTYPE-OID-MIB::hpnicfevtModuleSw-SPC-GP44XP4LAX,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.3.1.9.4.1034,HPN-ICF-ENTITY-VENDORTYPE-OID-MIB::hpnicfevtModuleSw-SPC-XP24LCX,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.3.1.9.4.1035,HPN-ICF-ENTITY-VENDORTYPE-OID-MIB::hpnicfevtModuleSw-SPC-XP24LAX,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.3.1.9.4.1036,HPN-ICF-ENTITY-VENDORTYPE-OID-MIB::hpnicfevtModuleSw-SPC-XP12LCX,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.3.1.9.4.1037,HPN-ICF-ENTITY-VENDORTYPE-OID-MIB::hpnicfevtModuleSw-SPC-XP12LAX,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.3.1.9.4.1038,HPN-ICF-ENTITY-VENDORTYPE-OID-MIB::hpnicfevtModuleSw-SPC-XLP6LCX,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.3.1.9.4.1039,HPN-ICF-ENTITY-VENDORTYPE-OID-MIB::hpnicfevtModuleSw-SPC-XLP6LAX,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.3.1.9.4.1040,HPN-ICF-ENTITY-VENDORTYPE-OID-MIB::hpnicfevtModuleSw-SPC-CP1LCX,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.3.1.9.4.1041,HPN-ICF-ENTITY-VENDORTYPE-OID-MIB::hpnicfevtModuleSw-SPC-CP1LAX,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.3.1.9.4.1042,HPN-ICF-ENTITY-VENDORTYPE-OID-MIB::hpnicfevtModuleSw-SPC-CP2LB,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.3.1.9.4.1043,HPN-ICF-ENTITY-VENDORTYPE-OID-MIB::hpnicfevtModuleSw-SPC-CP2LA,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.3.1.9.4.1044,HPN-ICF-ENTITY-VENDORTYPE-OID-MIB::hpnicfevtModuleSw-SR05SRP1L1,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.3.1.9.4.1045,HPN-ICF-ENTITY-VENDORTYPE-OID-MIB::hpnicfevtModuleSw-SR05SRP1L3,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.3.1.9.4.1046,HPN-ICF-ENTITY-VENDORTYPE-OID-MIB::hpnicfevtModuleSw-SFC-04-4,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.3.1.9.4.1047,HPN-ICF-ENTITY-VENDORTYPE-OID-MIB::hpnicfevtModuleSw-SFC-04-3,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.3.1.9.4.1048,HPN-ICF-ENTITY-VENDORTYPE-OID-MIB::hpnicfevtModuleSw-SFC-04-2,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.3.1.9.4.1049,HPN-ICF-ENTITY-VENDORTYPE-OID-MIB::hpnicfevtModuleSw-SFC-04-1,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.3.1.9.4.1050,HPN-ICF-ENTITY-VENDORTYPE-OID-MIB::hpnicfevtModuleSw-LST1NSM2C1,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.3.1.9.4.1051,HPN-ICF-ENTITY-VENDORTYPE-OID-MIB::hpnicfevtModuleSw-CR-SPC-XP20RB,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.3.1.9.4.1052,HPN-ICF-ENTITY-VENDORTYPE-OID-MIB::hpnicfevtModuleSw-SR07SRPUA1,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.3.1.9.4.1053,HPN-ICF-ENTITY-VENDORTYPE-OID-MIB::hpnicfevtModuleSw-SR07SRPUB3,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.3.1.9.4.1054,HPN-ICF-ENTITY-VENDORTYPE-OID-MIB::hpnicfevtModuleSw-SR07SRPUC3,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.3.1.9.4.1055,HPN-ICF-ENTITY-VENDORTYPE-OID-MIB::hpnicfevtModuleSw-SR07MPUA1,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.3.1.9.4.1056,HPN-ICF-ENTITY-VENDORTYPE-OID-MIB::hpnicfevtModuleSw-SR07SRPUB1,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.3.1.9.4.1057,HPN-ICF-ENTITY-VENDORTYPE-OID-MIB::hpnicfevtModuleSw-SR07SRPUC1,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.3.1.9.4.1058,HPN-ICF-ENTITY-VENDORTYPE-OID-MIB::hpnicfevtModuleSw-MIC-MS4L,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.3.1.9.4.1059,HPN-ICF-ENTITY-VENDORTYPE-OID-MIB::hpnicfevtModuleSw-SPC-GP44XP4LC,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.3.1.9.4.1060,HPN-ICF-ENTITY-VENDORTYPE-OID-MIB::hpnicfevtModuleSw-SPC-GP44XP4LA,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.3.1.9.4.1061,HPN-ICF-ENTITY-VENDORTYPE-OID-MIB::hpnicfevtModuleSw-SPC-XLP2XP4LC,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.3.1.9.4.1062,HPN-ICF-ENTITY-VENDORTYPE-OID-MIB::hpnicfevtModuleSw-SPC-XP12LC,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.3.1.9.4.1063,HPN-ICF-ENTITY-VENDORTYPE-OID-MIB::hpnicfevtModuleSw-SPC-CP1LC,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.3.1.9.4.1064,HPN-ICF-ENTITY-VENDORTYPE-OID-MIB::hpnicfevtModuleSw-SPC-XP24LC,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.3.1.9.4.1065,HPN-ICF-ENTITY-VENDORTYPE-OID-MIB::hpnicfevtModuleSw-SR07SRPUD3,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.3.1.9.4.1066,HPN-ICF-ENTITY-VENDORTYPE-OID-MIB::hpnicfevtModuleSw-SR07MPUA3,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.3.1.9.4.1067,HPN-ICF-ENTITY-VENDORTYPE-OID-MIB::hpnicfevtModuleSw-MPEX-1304,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.3.1.9.4.1068,HPN-ICF-ENTITY-VENDORTYPE-OID-MIB::hpnicfevtModuleSw-MIC-GP10L1,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.3.1.9.4.1069,HPN-ICF-ENTITY-VENDORTYPE-OID-MIB::hpnicfevtModuleSw-SR07SRPUB,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.3.1.9.4.1070,HPN-ICF-ENTITY-VENDORTYPE-OID-MIB::hpnicfevtModuleSw-CMPE-1104,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.3.1.9.4.1071,HPN-ICF-ENTITY-VENDORTYPE-OID-MIB::hpnicfevtModuleSw-CSFC-04-1,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.3.1.9.4.1072,HPN-ICF-ENTITY-VENDORTYPE-OID-MIB::hpnicfevtModuleSw-CSFC-04-2,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.3.1.9.4.1073,HPN-ICF-ENTITY-VENDORTYPE-OID-MIB::hpnicfevtModuleSw-CSFC-04-3,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.3.1.9.4.1074,HPN-ICF-ENTITY-VENDORTYPE-OID-MIB::hpnicfevtModuleSw-CSFC-04-4,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.3.1.9.4.1075,HPN-ICF-ENTITY-VENDORTYPE-OID-MIB::hpnicfevtModuleSw-CSFC-04B,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.3.1.9.4.1076,HPN-ICF-ENTITY-VENDORTYPE-OID-MIB::hpnicfevtModuleSw-CSFC-04D,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.3.1.9.4.1077,HPN-ICF-ENTITY-VENDORTYPE-OID-MIB::hpnicfevtModuleSw-CSFC-08B,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.3.1.9.4.1078,HPN-ICF-ENTITY-VENDORTYPE-OID-MIB::hpnicfevtModuleSw-CSFC-08D,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.3.1.9.4.1079,HPN-ICF-ENTITY-VENDORTYPE-OID-MIB::hpnicfevtModuleSw-CSFC-12B,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.3.1.9.4.1080,HPN-ICF-ENTITY-VENDORTYPE-OID-MIB::hpnicfevtModuleSw-CSFC-12D,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.3.1.9.4.1081,HPN-ICF-ENTITY-VENDORTYPE-OID-MIB::hpnicfevtModuleSw-CSPC-CP1LCX,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.3.1.9.4.1082,HPN-ICF-ENTITY-VENDORTYPE-OID-MIB::hpnicfevtModuleSw-CSPC-CP2LB,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.3.1.9.4.1083,HPN-ICF-ENTITY-VENDORTYPE-OID-MIB::hpnicfevtModuleSw-CSPC-GP24LA1,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.3.1.9.4.1084,HPN-ICF-ENTITY-VENDORTYPE-OID-MIB::hpnicfevtModuleSw-CSPC-GP24XP2LB,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.3.1.9.4.1085,HPN-ICF-ENTITY-VENDORTYPE-OID-MIB::hpnicfevtModuleSw-CSPC-GP44XP4LCX,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.3.1.9.4.1086,HPN-ICF-ENTITY-VENDORTYPE-OID-MIB::hpnicfevtModuleSw-CSPC-GP48LB,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.3.1.9.4.1087,HPN-ICF-ENTITY-VENDORTYPE-OID-MIB::hpnicfevtModuleSw-CSPC-GT48LA1,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.3.1.9.4.1088,HPN-ICF-ENTITY-VENDORTYPE-OID-MIB::hpnicfevtModuleSw-CSPC-XLP6LCX,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.3.1.9.4.1089,HPN-ICF-ENTITY-VENDORTYPE-OID-MIB::hpnicfevtModuleSw-CSPC-XP2LA1,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.3.1.9.4.1090,HPN-ICF-ENTITY-VENDORTYPE-OID-MIB::hpnicfevtModuleSw-CSPC-XP4LB,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.3.1.9.4.1091,HPN-ICF-ENTITY-VENDORTYPE-OID-MIB::hpnicfevtModuleSw-CSPC-XP8LB,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.3.1.9.4.1092,HPN-ICF-ENTITY-VENDORTYPE-OID-MIB::hpnicfevtModuleSw-CSPC-XP12LAX,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.3.1.9.4.1093,HPN-ICF-ENTITY-VENDORTYPE-OID-MIB::hpnicfevtModuleSw-CSPC-XP12LCX,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.3.1.9.4.1094,HPN-ICF-ENTITY-VENDORTYPE-OID-MIB::hpnicfevtModuleSw-CSPC-XP24LAX,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.3.1.9.4.1095,HPN-ICF-ENTITY-VENDORTYPE-OID-MIB::hpnicfevtModuleSw-CSPC-XP24LCX,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.3.1.9.4.1096,HPN-ICF-ENTITY-VENDORTYPE-OID-MIB::hpnicfevtModuleSw-CSPC-CSPEX-1204,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.3.1.9.4.1097,HPN-ICF-ENTITY-VENDORTYPE-OID-MIB::hpnicfevtModuleSw-CSR05SRP1L1,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.3.1.9.4.1098,HPN-ICF-ENTITY-VENDORTYPE-OID-MIB::hpnicfevtModuleSw-CSR05SRP1L3,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.3.1.9.4.1099,HPN-ICF-ENTITY-VENDORTYPE-OID-MIB::hpnicfevtModuleSw-CSR07MPUA1,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.3.1.9.4.1100,HPN-ICF-ENTITY-VENDORTYPE-OID-MIB::hpnicfevtModuleSw-CSR07SRPUA1,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.3.1.9.4.1101,HPN-ICF-ENTITY-VENDORTYPE-OID-MIB::hpnicfevtModuleSw-CSR07SRPUB1,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.3.1.9.4.1102,HPN-ICF-ENTITY-VENDORTYPE-OID-MIB::hpnicfevtModuleSw-CSR07SRPUC1,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.3.1.9.4.1103,HPN-ICF-ENTITY-VENDORTYPE-OID-MIB::hpnicfevtModuleSw-LSXM1CGX8FX1,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.3.1.9.4.1104,HPN-ICF-ENTITY-VENDORTYPE-OID-MIB::hpnicfevtModuleSw-LSXM1QGS24FX1,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.3.1.9.4.1105,HPN-ICF-ENTITY-VENDORTYPE-OID-MIB::hpnicfevtModuleSw-LSXM1TGS48FX1,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.3.1.9.4.1106,HPN-ICF-ENTITY-VENDORTYPE-OID-MIB::hpnicfevtModuleSw-LSXM1QGS12FX1,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.3.1.9.4.1107,HPN-ICF-ENTITY-VENDORTYPE-OID-MIB::hpnicfevtModuleSw-LSXM1TGT48FX1,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.3.1.9.4.1108,HPN-ICF-ENTITY-VENDORTYPE-OID-MIB::hpnicfevtModuleSw-LSU1IPSBEA0,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.3.1.9.4.1201,HPN-ICF-ENTITY-VENDORTYPE-OID-MIB::hpnicfevtModuleSw-LSU1QGC4SF0,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.3.1.9.4.1202,HPN-ICF-ENTITY-VENDORTYPE-OID-MIB::hpnicfevtModuleSw-LSU1QGS8SF0,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.3.1.9.4.1203,HPN-ICF-ENTITY-VENDORTYPE-OID-MIB::hpnicfevtModuleSw-LSU1TGS48SF0,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.3.1.9.4.1204,HPN-ICF-ENTITY-VENDORTYPE-OID-MIB::hpnicfevtModuleSw-LSU1QGS4SF0,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.3.1.9.4.1205,HPN-ICF-ENTITY-VENDORTYPE-OID-MIB::hpnicfevtModuleSw-LSU1TGS32SF0,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.3.1.9.4.1206,HPN-ICF-ENTITY-VENDORTYPE-OID-MIB::hpnicfevtModuleSw-LSU1FAB08D0,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.3.1.9.4.1207,HPN-ICF-ENTITY-VENDORTYPE-OID-MIB::hpnicfevtModuleSw-LSU1FAB04B0,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.3.1.9.4.1208,HPN-ICF-ENTITY-VENDORTYPE-OID-MIB::hpnicfevtModuleSw-LSU1FAB08B0,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.3.1.9.4.1209,HPN-ICF-ENTITY-VENDORTYPE-OID-MIB::hpnicfevtModuleSw-LSU1FAB12D0,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.3.1.9.4.1210,HPN-ICF-ENTITY-VENDORTYPE-OID-MIB::hpnicfevtModuleSw-LSU1FAB12B0,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.3.1.9.4.1211,HPN-ICF-ENTITY-VENDORTYPE-OID-MIB::hpnicfevtModuleSw-LSU1FAB04D0,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.3.1.9.4.1212,HPN-ICF-ENTITY-VENDORTYPE-OID-MIB::hpnicfevtModuleSw-LSQ1CTGS16SC0,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.3.1.9.4.1213,HPN-ICF-ENTITY-VENDORTYPE-OID-MIB::hpnicfevtModuleSw-EWPX2CTGS16SC0,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.3.1.9.4.1214,HPN-ICF-ENTITY-VENDORTYPE-OID-MIB::hpnicfevtModuleSw-LSU3WCMD0,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.3.1.9.4.1215,HPN-ICF-ENTITY-VENDORTYPE-OID-MIB::hpnicfevtModuleSw-EWPX3WCMD0,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.3.1.9.4.1216,HPN-ICF-ENTITY-VENDORTYPE-OID-MIB::hpnicfevtModuleSw-LSQ1QGS4SC0,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.3.1.9.4.1217,HPN-ICF-ENTITY-VENDORTYPE-OID-MIB::hpnicfevtModuleSw-LSQ1QGC4SC0,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.3.1.9.4.1218,HPN-ICF-ENTITY-VENDORTYPE-OID-MIB::hpnicfevtModuleSw-LSU1TGT24SF0,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.3.1.9.4.1219,HPN-ICF-ENTITY-VENDORTYPE-OID-MIB::hpnicfevtModuleSw-LSQ1QGS8SC3,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.3.1.9.4.1220,HPN-ICF-ENTITY-VENDORTYPE-OID-MIB::hpnicfevtModuleSw-LSQ1TGS32SC3,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.3.1.9.4.1221,HPN-ICF-ENTITY-VENDORTYPE-OID-MIB::hpnicfevtModuleSw-LSQ1QGS4SC3,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.3.1.9.4.1222,HPN-ICF-ENTITY-VENDORTYPE-OID-MIB::hpnicfevtModuleSw-LSQ1TGS48SC3,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.3.1.9.4.1223,HPN-ICF-ENTITY-VENDORTYPE-OID-MIB::hpnicfevtModuleSw-LSQ1QGC4SC3,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.3.1.9.4.1224,HPN-ICF-ENTITY-VENDORTYPE-OID-MIB::hpnicfevtModuleSw-LSQ1FAB12D3,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.3.1.9.4.1225,HPN-ICF-ENTITY-VENDORTYPE-OID-MIB::hpnicfevtModuleSw-LSQ1FAB08D3,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.3.1.9.4.1226,HPN-ICF-ENTITY-VENDORTYPE-OID-MIB::hpnicfevtModuleSw-LSQ1FAB04D3,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.3.1.9.4.1227,HPN-ICF-ENTITY-VENDORTYPE-OID-MIB::hpnicfevtModuleSw-LSQ1TGS8EB3,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.3.1.9.4.1228,HPN-ICF-ENTITY-VENDORTYPE-OID-MIB::hpnicfevtModuleSw-LSQ1TGT24SC3,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.3.1.9.4.1229,HPN-ICF-ENTITY-VENDORTYPE-OID-MIB::hpnicfevtModuleSw-LSQ1FAB08B0,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.3.1.9.4.1230,HPN-ICF-ENTITY-VENDORTYPE-OID-MIB::hpnicfevtModuleSw-EWPX2CTGS16SC,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.3.1.9.4.1231,HPN-ICF-ENTITY-VENDORTYPE-OID-MIB::hpnicfevtModuleSw-LSU1SUPB0,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.3.1.9.4.1232,HPN-ICF-ENTITY-VENDORTYPE-OID-MIB::hpnicfevtModuleSw-LSQ1GP48SA0,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.3.1.9.4.1233,HPN-ICF-ENTITY-VENDORTYPE-OID-MIB::hpnicfevtModuleSw-LSQ1TGX2SA0,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.3.1.9.4.1234,HPN-ICF-ENTITY-VENDORTYPE-OID-MIB::hpnicfevtModuleSw-LSV1SRPUA1,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.3.1.9.4.1235,HPN-ICF-ENTITY-VENDORTYPE-OID-MIB::hpnicfevtModuleSw-LSV1QGS12SA1,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.3.1.9.4.1236,HPN-ICF-ENTITY-VENDORTYPE-OID-MIB::hpnicfevtModuleSw-LSV1MPUA1,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.3.1.9.4.1237,HPN-ICF-ENTITY-VENDORTYPE-OID-MIB::hpnicfevtModuleSw-LSX1SUP10A0,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.3.1.9.4.1238,HPN-ICF-ENTITY-VENDORTYPE-OID-MIB::hpnicfevtModuleSw-LSX1SUP16A0,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.3.1.9.4.1239,HPN-ICF-ENTITY-VENDORTYPE-OID-MIB::hpnicfevtModuleSw-LSX1SUP10A1,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.3.1.9.4.1240,HPN-ICF-ENTITY-VENDORTYPE-OID-MIB::hpnicfevtModuleSw-LSX1SUP16A1,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.3.1.9.4.1241,HPN-ICF-ENTITY-VENDORTYPE-OID-MIB::hpnicfevtModuleSw-LSX1FAB10B0,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.3.1.9.4.1242,HPN-ICF-ENTITY-VENDORTYPE-OID-MIB::hpnicfevtModuleSw-LSX1FAB16B0,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.3.1.9.4.1243,HPN-ICF-ENTITY-VENDORTYPE-OID-MIB::hpnicfevtModuleSw-LSX1FAB10B1,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.3.1.9.4.1244,HPN-ICF-ENTITY-VENDORTYPE-OID-MIB::hpnicfevtModuleSw-LSX1FAB16B1,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.3.1.9.4.1245,HPN-ICF-ENTITY-VENDORTYPE-OID-MIB::hpnicfevtModuleSw-LSX1QGS16EA0,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.3.1.9.4.1246,HPN-ICF-ENTITY-VENDORTYPE-OID-MIB::hpnicfevtModuleSw-LSX1TGS48EA0,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.3.1.9.4.1247,HPN-ICF-ENTITY-VENDORTYPE-OID-MIB::hpnicfevtModuleSw-LSX1QGS16EA1,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.3.1.9.4.1248,HPN-ICF-ENTITY-VENDORTYPE-OID-MIB::hpnicfevtModuleSw-LSX1TGS48EA1,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.3.1.9.4.1249,HPN-ICF-ENTITY-VENDORTYPE-OID-MIB::hpnicfevtModuleSw-LSU1TGT24SF9,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.3.1.9.4.1250,HPN-ICF-ENTITY-VENDORTYPE-OID-MIB::hpnicfevtModuleSw-LSU1QGS8SF9,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.3.1.9.4.1251,HPN-ICF-ENTITY-VENDORTYPE-OID-MIB::hpnicfevtModuleSw-LSU1QGS4SF9,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.3.1.9.4.1252,HPN-ICF-ENTITY-VENDORTYPE-OID-MIB::hpnicfevtModuleSw-LSU1TGS48SF9,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.3.1.9.4.1253,HPN-ICF-ENTITY-VENDORTYPE-OID-MIB::hpnicfevtModuleSw-LSU1TGS32SF9,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.3.1.9.4.1254,HPN-ICF-ENTITY-VENDORTYPE-OID-MIB::hpnicfevtModuleSw-LSU1FAB08D9,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.3.1.9.4.1255,HPN-ICF-ENTITY-VENDORTYPE-OID-MIB::hpnicfevtModuleSw-LSU1SUPB9,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.3.1.9.4.1256,HPN-ICF-ENTITY-VENDORTYPE-OID-MIB::hpnicfevtModuleSw-LSQ3GV48SC0,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.3.1.9.4.1257,HPN-ICF-ENTITY-VENDORTYPE-OID-MIB::hpnicfevtModuleSw-LSX1QGS12EC1,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.3.1.9.4.1258,HPN-ICF-ENTITY-VENDORTYPE-OID-MIB::hpnicfevtModuleSw-LSX1QGS12EC0,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.3.1.9.4.1259,HPN-ICF-ENTITY-VENDORTYPE-OID-MIB::hpnicfevtModuleSw-LSX1TGS48EC0,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.3.1.9.4.1260,HPN-ICF-ENTITY-VENDORTYPE-OID-MIB::hpnicfevtModuleSw-LSX1TGS48EC1,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.3.1.9.4.1261,HPN-ICF-ENTITY-VENDORTYPE-OID-MIB::hpnicfevtModuleSw-LSX1TGS24EC0,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.3.1.9.4.1262,HPN-ICF-ENTITY-VENDORTYPE-OID-MIB::hpnicfevtModuleSw-LSX1TGS24EC1,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.3.1.9.4.1263,HPN-ICF-ENTITY-VENDORTYPE-OID-MIB::hpnicfevtModuleSw-LSX1FAB10A0,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.3.1.9.4.1264,HPN-ICF-ENTITY-VENDORTYPE-OID-MIB::hpnicfevtModuleSw-LSX1FAB16A1,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.3.1.9.4.1265,HPN-ICF-ENTITY-VENDORTYPE-OID-MIB::hpnicfevtModuleSw-LSX1QGS12FB0,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.3.1.9.4.1266,HPN-ICF-ENTITY-VENDORTYPE-OID-MIB::hpnicfevtModuleSw-LSX1TGS24FB0,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.3.1.9.4.1267,HPN-ICF-ENTITY-VENDORTYPE-OID-MIB::hpnicfevtModuleSw-LSX1TGS48FB0,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.3.1.9.4.1268,HPN-ICF-ENTITY-VENDORTYPE-OID-MIB::hpnicfevtModuleSw-LSX1QGS12EB1,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.3.1.9.4.1269,HPN-ICF-ENTITY-VENDORTYPE-OID-MIB::hpnicfevtModuleSw-LSX1TGS24EB1,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.3.1.9.4.1270,HPN-ICF-ENTITY-VENDORTYPE-OID-MIB::hpnicfevtModuleSw-LSX1FAB10A1,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.3.1.9.4.1271,HPN-ICF-ENTITY-VENDORTYPE-OID-MIB::hpnicfevtModuleSw-LSX1TGS48EB1,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.3.1.9.4.1272,HPN-ICF-ENTITY-VENDORTYPE-OID-MIB::hpnicfevtModuleSw-LSX1GP48EB1,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.3.1.9.4.1273,HPN-ICF-ENTITY-VENDORTYPE-OID-MIB::hpnicfevtModuleSw-LSX1GP48FB0,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.3.1.9.4.1274,HPN-ICF-ENTITY-VENDORTYPE-OID-MIB::hpnicfevtModuleSw-LSX1GT48FC0,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.3.1.9.4.1275,HPN-ICF-ENTITY-VENDORTYPE-OID-MIB::hpnicfevtModuleSw-LSX1GT48FC1,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.3.1.9.4.1276,HPN-ICF-ENTITY-VENDORTYPE-OID-MIB::hpnicfevtModuleSw-LSX1GP48FC0,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.3.1.9.4.1277,HPN-ICF-ENTITY-VENDORTYPE-OID-MIB::hpnicfevtModuleSw-LSX1GP48FC1,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.3.1.9.4.1278,HPN-ICF-ENTITY-VENDORTYPE-OID-MIB::hpnicfevtModuleSw-LSX1QGS12FC0,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.3.1.9.4.1279,HPN-ICF-ENTITY-VENDORTYPE-OID-MIB::hpnicfevtModuleSw-LSX1QGS12FC1,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.3.1.9.4.1280,HPN-ICF-ENTITY-VENDORTYPE-OID-MIB::hpnicfevtModuleSw-LSX2TGS48EA1,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.3.1.9.4.1281,HPN-ICF-ENTITY-VENDORTYPE-OID-MIB::hpnicfevtModuleSw-LSX1CGC4EB1,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.3.1.9.4.1282,HPN-ICF-ENTITY-VENDORTYPE-OID-MIB::hpnicfevtModuleSw-LSX1CGC4EC0,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.3.1.9.4.1283,HPN-ICF-ENTITY-VENDORTYPE-OID-MIB::hpnicfevtModuleSw-LSX1GT48EB1,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.3.1.9.4.1284,HPN-ICF-ENTITY-VENDORTYPE-OID-MIB::hpnicfevtModuleSw-LSX1GT48FB0,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.3.1.9.4.1285,HPN-ICF-ENTITY-VENDORTYPE-OID-MIB::hpnicfevtModuleSw-LSX1FAB16S1,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.3.1.9.4.1286,HPN-ICF-ENTITY-VENDORTYPE-OID-MIB::hpnicfevtModuleSw-LSQ1SUPB3,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.3.1.9.4.1287,HPN-ICF-ENTITY-VENDORTYPE-OID-MIB::hpnicfevtModuleSw-LSU1CGC2SE0,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.3.1.9.4.1288,HPN-ICF-ENTITY-VENDORTYPE-OID-MIB::hpnicfevtModuleSw-LSU1TGS16SF0,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.3.1.9.4.1289,HPN-ICF-ENTITY-VENDORTYPE-OID-MIB::hpnicfevtModuleSw-LSU1TGS8SF0,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.3.1.9.4.1290,HPN-ICF-ENTITY-VENDORTYPE-OID-MIB::hpnicfevtModuleSw-LSQ1TGS4SC0,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.3.1.9.4.1291,HPN-ICF-ENTITY-VENDORTYPE-OID-MIB::hpnicfevtModuleSw-LSU1GT48SE3,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.3.1.9.4.1292,HPN-ICF-ENTITY-VENDORTYPE-OID-MIB::hpnicfevtModuleSw-LSU1GP48SE3,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.3.1.9.4.1293,HPN-ICF-ENTITY-VENDORTYPE-OID-MIB::hpnicfevtModuleSw-LSX1SUP10B0,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.3.1.9.4.1294,HPN-ICF-ENTITY-VENDORTYPE-OID-MIB::hpnicfevtModuleSw-LSX1SUP16B0,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.3.1.9.4.1295,HPN-ICF-ENTITY-VENDORTYPE-OID-MIB::hpnicfevtModuleSw-LSX1SUP10B1,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.3.1.9.4.1296,HPN-ICF-ENTITY-VENDORTYPE-OID-MIB::hpnicfevtModuleSw-LSX1SUP16B1,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.3.1.9.4.1297,HPN-ICF-ENTITY-VENDORTYPE-OID-MIB::hpnicfevtModuleSw-LSQ1CGV24PSC3,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.3.1.9.4.1298,HPN-ICF-ENTITY-VENDORTYPE-OID-MIB::hpnicfevtModuleSw-LSQ1SRPA8,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.3.1.9.4.1299,HPN-ICF-ENTITY-VENDORTYPE-OID-MIB::hpnicfevtModuleSw-LSQ1CGP24TSC8,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.3.1.9.4.1300,HPN-ICF-ENTITY-VENDORTYPE-OID-MIB::hpnicfevtModuleSw-LSQ1CGT24PSC8,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.3.1.9.4.1301,HPN-ICF-ENTITY-VENDORTYPE-OID-MIB::hpnicfevtModuleSw-LSQ1GT24PSA8,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.3.1.9.4.1302,HPN-ICF-ENTITY-VENDORTYPE-OID-MIB::hpnicfevtModuleSw-LSQ1GP24TSA8,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.3.1.9.4.1303,HPN-ICF-ENTITY-VENDORTYPE-OID-MIB::hpnicfevtModuleSw-LSQ1GT48SA8,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.3.1.9.4.1304,HPN-ICF-ENTITY-VENDORTYPE-OID-MIB::hpnicfevtModuleSw-LSQ1GP48SA8,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.3.1.9.4.1305,HPN-ICF-ENTITY-VENDORTYPE-OID-MIB::hpnicfevtModuleSw-LSQ1TGS4SC8,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.3.1.9.4.1306,HPN-ICF-ENTITY-VENDORTYPE-OID-MIB::hpnicfevtModuleSw-LSQ1TGS8SC8,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.3.1.9.4.1307,HPN-ICF-ENTITY-VENDORTYPE-OID-MIB::hpnicfevtModuleSw-LSU1GT24SE3,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.3.1.9.4.1308,HPN-ICF-ENTITY-VENDORTYPE-OID-MIB::hpnicfevtModuleSw-LSU1GP12SE3,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.3.1.9.4.1309,HPN-ICF-ENTITY-VENDORTYPE-OID-MIB::hpnicfevtModuleSw-LSU1GP24SE3,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.3.1.9.4.1310,HPN-ICF-ENTITY-VENDORTYPE-OID-MIB::hpnicfevtModuleSw-LSU1T24XGSE3,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.3.1.9.4.1311,HPN-ICF-ENTITY-VENDORTYPE-OID-MIB::hpnicfevtModuleSw-LSU1P24XGSE3,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.3.1.9.4.1312,HPN-ICF-ENTITY-VENDORTYPE-OID-MIB::hpnicfevtModuleSw-LSU1GP24TSE3,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.3.1.9.4.1313,HPN-ICF-ENTITY-VENDORTYPE-OID-MIB::hpnicfevtModuleSw-LSU1GT40PSE3,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.3.1.9.4.1314,HPN-ICF-ENTITY-VENDORTYPE-OID-MIB::hpnicfevtModuleSw-LSV1TGS24SA1,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.3.1.9.4.1315,HPN-ICF-ENTITY-VENDORTYPE-OID-MIB::hpnicfevtModuleSw-LSV1SRPA1,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.3.1.9.4.1316,HPN-ICF-ENTITY-VENDORTYPE-OID-MIB::hpnicfevtModuleSw-LSV1SRPC1,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.3.1.9.4.1317,HPN-ICF-ENTITY-VENDORTYPE-OID-MIB::hpnicfevtModuleSw-LSX1FAB16S0,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.3.1.9.4.1318,HPN-ICF-ENTITY-VENDORTYPE-OID-MIB::hpnicfevtModuleSw-LSU1WCME0,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.3.1.9.4.1319,HPN-ICF-ENTITY-VENDORTYPE-OID-MIB::hpnicfevtModuleSw-EWPX1WCME0,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.3.1.9.4.1320,HPN-ICF-ENTITY-VENDORTYPE-OID-MIB::hpnicfevtModuleSw-LSU1TGS48SG0,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.3.1.9.4.1321,HPN-ICF-ENTITY-VENDORTYPE-OID-MIB::hpnicfevtModuleSw-LSU1QGS12SG0,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.3.1.9.4.1322,HPN-ICF-ENTITY-VENDORTYPE-OID-MIB::hpnicfevtModuleSw-LSU1GP44TSEC0,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.3.1.9.4.1323,HPN-ICF-ENTITY-VENDORTYPE-OID-MIB::hpnicfevtModuleSw-LSU1TGS24EC0,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.3.1.9.4.1324,HPN-ICF-ENTITY-VENDORTYPE-OID-MIB::hpnicfevtModuleSw-LSU1QGS6EC0,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.3.1.9.4.1325,HPN-ICF-ENTITY-VENDORTYPE-OID-MIB::hpnicfevtModuleSw-LSU1CGC2EC0,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.3.1.9.4.1326,HPN-ICF-ENTITY-VENDORTYPE-OID-MIB::hpnicfevtModuleSw-LSU1CGC2SE9,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.3.1.9.4.1327,HPN-ICF-ENTITY-VENDORTYPE-OID-MIB::hpnicfevtModuleSw-LSXM1QGS24EX1,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.3.1.9.4.1328,HPN-ICF-ENTITY-VENDORTYPE-OID-MIB::hpnicfevtModuleSw-LSXM1QGS24FB0,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.3.1.9.4.1329,HPN-ICF-ENTITY-VENDORTYPE-OID-MIB::hpnicfevtModuleSw-LSVM1QGS12FX1,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.3.1.9.4.1330,HPN-ICF-ENTITY-VENDORTYPE-OID-MIB::hpnicfevtModuleSw-LSVM1TGS24FX1,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.3.1.9.4.1331,HPN-ICF-ENTITY-VENDORTYPE-OID-MIB::hpnicfevtModuleSw-LSVM1QGS6C2FX1,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.3.1.9.4.1332,HPN-ICF-ENTITY-VENDORTYPE-OID-MIB::hpnicfevtModuleSw-LSQ2GP44TSSC0,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.3.1.9.4.1333,HPN-ICF-ENTITY-VENDORTYPE-OID-MIB::hpnicfevtModuleSw-LSQ2GP44TSSC3,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.3.1.9.4.1334,HPN-ICF-ENTITY-VENDORTYPE-OID-MIB::hpnicfevtModuleSw-LSQ2GP24TSSC0,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.3.1.9.4.1335,HPN-ICF-ENTITY-VENDORTYPE-OID-MIB::hpnicfevtModuleSw-LSQ2GP24TSSC3,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.3.1.9.4.1336,HPN-ICF-ENTITY-VENDORTYPE-OID-MIB::hpnicfevtModuleSw-LSQ2GT24PTSSC0,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.3.1.9.4.1337,HPN-ICF-ENTITY-VENDORTYPE-OID-MIB::hpnicfevtModuleSw-LSQ2GT24PTSSC3,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.3.1.9.4.1338,HPN-ICF-ENTITY-VENDORTYPE-OID-MIB::hpnicfevtModuleSw-LSQ2GT24TSSC0,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.3.1.9.4.1339,HPN-ICF-ENTITY-VENDORTYPE-OID-MIB::hpnicfevtModuleSw-LSQ2GT24TSSC3,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.3.1.9.4.1340,HPN-ICF-ENTITY-VENDORTYPE-OID-MIB::hpnicfevtModuleSw-LSQ2GT48SC0,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.3.1.9.4.1341,HPN-ICF-ENTITY-VENDORTYPE-OID-MIB::hpnicfevtModuleSw-LSQ2GT48SC3,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.3.1.9.4.1342,HPN-ICF-ENTITY-VENDORTYPE-OID-MIB::hpnicfevtModuleSw-LSQ2GV48SC0,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.3.1.9.4.1343,HPN-ICF-ENTITY-VENDORTYPE-OID-MIB::hpnicfevtModuleSw-LSQ2GV48SC3,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.3.1.9.4.1344,HPN-ICF-ENTITY-VENDORTYPE-OID-MIB::hpnicfevtModuleSw-LSQ2TGS16SF0,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.3.1.9.4.1345,HPN-ICF-ENTITY-VENDORTYPE-OID-MIB::hpnicfevtModuleSw-LSQ2TGS16SF3,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.3.1.9.4.1346,HPN-ICF-ENTITY-VENDORTYPE-OID-MIB::hpnicfevtModuleSw-LSQ2MPUD0,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.3.1.9.4.1347,HPN-ICF-ENTITY-VENDORTYPE-OID-MIB::hpnicfevtModuleSw-LSQ2MPUD3,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.3.1.9.4.1348,HPN-ICF-ENTITY-VENDORTYPE-OID-MIB::hpnicfevtModuleSw-LSQ2MPUA0,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.3.1.9.4.1349,HPN-ICF-ENTITY-VENDORTYPE-OID-MIB::hpnicfevtModuleSw-LSQ2MPUA3,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.3.1.9.4.1350,HPN-ICF-ENTITY-VENDORTYPE-OID-MIB::hpnicfevtModuleSw-LSU2GP44TSSE0,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.3.1.9.4.1351,HPN-ICF-ENTITY-VENDORTYPE-OID-MIB::hpnicfevtModuleSw-LSU2GP44TSSE3,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.3.1.9.4.1352,HPN-ICF-ENTITY-VENDORTYPE-OID-MIB::hpnicfevtModuleSw-LSU2GP24TSSE0,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.3.1.9.4.1353,HPN-ICF-ENTITY-VENDORTYPE-OID-MIB::hpnicfevtModuleSw-LSU2GP24TSSE3,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.3.1.9.4.1354,HPN-ICF-ENTITY-VENDORTYPE-OID-MIB::hpnicfevtModuleSw-LSU2GT24PTSSE0,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.3.1.9.4.1355,HPN-ICF-ENTITY-VENDORTYPE-OID-MIB::hpnicfevtModuleSw-LSU2GT24PTSSE3,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.3.1.9.4.1356,HPN-ICF-ENTITY-VENDORTYPE-OID-MIB::hpnicfevtModuleSw-LSU2GT24TSSE0,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.3.1.9.4.1357,HPN-ICF-ENTITY-VENDORTYPE-OID-MIB::hpnicfevtModuleSw-LSU2GT24TSSE3,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.3.1.9.4.1358,HPN-ICF-ENTITY-VENDORTYPE-OID-MIB::hpnicfevtModuleSw-LSU2GT48SE0,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.3.1.9.4.1359,HPN-ICF-ENTITY-VENDORTYPE-OID-MIB::hpnicfevtModuleSw-LSU2GT48SE3,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.3.1.9.4.1360,HPN-ICF-ENTITY-VENDORTYPE-OID-MIB::hpnicfevtModuleSw-LSU2GV48SE0,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.3.1.9.4.1361,HPN-ICF-ENTITY-VENDORTYPE-OID-MIB::hpnicfevtModuleSw-LSU2GV48SE3,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.3.1.9.4.1362,HPN-ICF-ENTITY-VENDORTYPE-OID-MIB::hpnicfevtModuleSw-LSU2TGS16SF0,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.3.1.9.4.1363,HPN-ICF-ENTITY-VENDORTYPE-OID-MIB::hpnicfevtModuleSw-LSU2TGS16SF3,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.3.1.9.4.1364,HPN-ICF-ENTITY-VENDORTYPE-OID-MIB::hpnicfevtModuleSw-LSU1MPU06B0,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.3.1.9.4.1365,HPN-ICF-ENTITY-VENDORTYPE-OID-MIB::hpnicfevtModuleSw-LSU1MPU06B3,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.3.1.9.4.1366,HPN-ICF-ENTITY-VENDORTYPE-OID-MIB::hpnicfevtModuleSw-LSU1MPU10C0,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.3.1.9.4.1367,HPN-ICF-ENTITY-VENDORTYPE-OID-MIB::hpnicfevtModuleSw-LSU1MPU10C3,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.3.1.9.4.1368,HPN-ICF-ENTITY-VENDORTYPE-OID-MIB::hpnicfevtModuleSw-LSU1FAB06C0,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.3.1.9.4.1369,HPN-ICF-ENTITY-VENDORTYPE-OID-MIB::hpnicfevtModuleSw-LSU1FAB06C3,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.3.1.9.4.1370,HPN-ICF-ENTITY-VENDORTYPE-OID-MIB::hpnicfevtModuleSw-LSU1FAB10C0,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.3.1.9.4.1371,HPN-ICF-ENTITY-VENDORTYPE-OID-MIB::hpnicfevtModuleSw-LSU1FAB10C3,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.3.1.9.4.1372,HPN-ICF-ENTITY-VENDORTYPE-OID-MIB::hpnicfevtModuleSw-LSXM1SUPA1,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.3.1.9.4.1373,HPN-ICF-ENTITY-VENDORTYPE-OID-MIB::hpnicfevtModuleSw-LSXM1SFF16B1,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.3.1.9.4.1400,HPN-ICF-ENTITY-VENDORTYPE-OID-MIB::hpnicfevtModulesw-PEX-Common,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.3.1.9.5,HPN-ICF-ENTITY-VENDORTYPE-OID-MIB::hpnicfevtSubModuleRouter,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.3.1.9.6,HPN-ICF-ENTITY-VENDORTYPE-OID-MIB::hpnicfevtSubModuleSwitch,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.3.1.10,HPN-ICF-ENTITY-VENDORTYPE-OID-MIB::hpnicfevtPort,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.3.1.10.1,HPN-ICF-ENTITY-VENDORTYPE-OID-MIB::hpnicfevtPortUnknownPorts,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.3.1.10.2,HPN-ICF-ENTITY-VENDORTYPE-OID-MIB::hpnicfevtPortCommonPorts,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.3.1.10.3,HPN-ICF-ENTITY-VENDORTYPE-OID-MIB::hpnicfevtPortRouterType,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.3.1.10.3.1,HPN-ICF-ENTITY-VENDORTYPE-OID-MIB::hpnicfevtPortRt-Async,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.3.1.10.3.2,HPN-ICF-ENTITY-VENDORTYPE-OID-MIB::hpnicfevtPortRt-Analogmodem,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.3.1.10.3.3,HPN-ICF-ENTITY-VENDORTYPE-OID-MIB::hpnicfevtPortRt-Atm,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.3.1.10.3.4,HPN-ICF-ENTITY-VENDORTYPE-OID-MIB::hpnicfevtPortRt-AtmAdsl,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.3.1.10.3.5,HPN-ICF-ENTITY-VENDORTYPE-OID-MIB::hpnicfevtPortRt-AtmShdsl,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.3.1.10.3.6,HPN-ICF-ENTITY-VENDORTYPE-OID-MIB::hpnicfevtPortRt-AtmE1,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.3.1.10.3.7,HPN-ICF-ENTITY-VENDORTYPE-OID-MIB::hpnicfevtPortRt-AtmT1,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.3.1.10.3.8,HPN-ICF-ENTITY-VENDORTYPE-OID-MIB::hpnicfevtPortRt-AtmE3,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.3.1.10.3.9,HPN-ICF-ENTITY-VENDORTYPE-OID-MIB::hpnicfevtPortRt-AtmT3,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.3.1.10.3.10,HPN-ICF-ENTITY-VENDORTYPE-OID-MIB::hpnicfevtPortRt-Atm622M,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.3.1.10.3.11,HPN-ICF-ENTITY-VENDORTYPE-OID-MIB::hpnicfevtPortRt-AtmImaE1,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.3.1.10.3.12,HPN-ICF-ENTITY-VENDORTYPE-OID-MIB::hpnicfevtPortRt-AtmImaT1,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.3.1.10.3.13,HPN-ICF-ENTITY-VENDORTYPE-OID-MIB::hpnicfevtPortRt-Atm25M,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.3.1.10.3.14,HPN-ICF-ENTITY-VENDORTYPE-OID-MIB::hpnicfevtPortRt-Bri,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.3.1.10.3.15,HPN-ICF-ENTITY-VENDORTYPE-OID-MIB::hpnicfevtPortRt-Console,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.3.1.10.3.16,HPN-ICF-ENTITY-VENDORTYPE-OID-MIB::hpnicfevtPortRt-E1,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.3.1.10.3.17,HPN-ICF-ENTITY-VENDORTYPE-OID-MIB::hpnicfevtPortRt-E3,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.3.1.10.3.18,HPN-ICF-ENTITY-VENDORTYPE-OID-MIB::hpnicfevtPortRt-T1,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.3.1.10.3.19,HPN-ICF-ENTITY-VENDORTYPE-OID-MIB::hpnicfevtPortRt-T3,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.3.1.10.3.20,HPN-ICF-ENTITY-VENDORTYPE-OID-MIB::hpnicfevtPortRt-Cpos,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.3.1.10.3.21,HPN-ICF-ENTITY-VENDORTYPE-OID-MIB::hpnicfevtPortRt-Ethernet,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.3.1.10.3.22,HPN-ICF-ENTITY-VENDORTYPE-OID-MIB::hpnicfevtPortRt-Serial,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.3.1.10.3.23,HPN-ICF-ENTITY-VENDORTYPE-OID-MIB::hpnicfevtPortRt-E1f,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.3.1.10.3.24,HPN-ICF-ENTITY-VENDORTYPE-OID-MIB::hpnicfevtPortRt-T1f,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.3.1.10.3.25,HPN-ICF-ENTITY-VENDORTYPE-OID-MIB::hpnicfevtPortRt-Pos,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.3.1.10.3.26,HPN-ICF-ENTITY-VENDORTYPE-OID-MIB::hpnicfevtPortRt-Ge,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.3.1.10.3.27,HPN-ICF-ENTITY-VENDORTYPE-OID-MIB::hpnicfevtPortRt-Aux,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.3.1.10.3.30,HPN-ICF-ENTITY-VENDORTYPE-OID-MIB::hpnicfevtPortRt-VG-Fxs,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.3.1.10.3.31,HPN-ICF-ENTITY-VENDORTYPE-OID-MIB::hpnicfevtPortRt-VG-Fxo,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.3.1.10.3.32,HPN-ICF-ENTITY-VENDORTYPE-OID-MIB::hpnicfevtPortRt-VG-E1vi,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.3.1.10.3.33,HPN-ICF-ENTITY-VENDORTYPE-OID-MIB::hpnicfevtPortRt-VG-T1vi,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.3.1.10.3.34,HPN-ICF-ENTITY-VENDORTYPE-OID-MIB::hpnicfevtPortRt-Usb,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.3.1.10.3.35,HPN-ICF-ENTITY-VENDORTYPE-OID-MIB::hpnicfevtPortRt-Ndec,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.3.1.10.3.36,HPN-ICF-ENTITY-VENDORTYPE-OID-MIB::hpnicfevtPortRt-Cavium,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.3.1.10.3.37,HPN-ICF-ENTITY-VENDORTYPE-OID-MIB::hpnicfevtPortRt-Fcm,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.3.1.10.3.38,HPN-ICF-ENTITY-VENDORTYPE-OID-MIB::hpnicfevtPortRt-E1vi,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.3.1.10.3.39,HPN-ICF-ENTITY-VENDORTYPE-OID-MIB::hpnicfevtPortRt-T1vi,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.3.1.10.3.40,HPN-ICF-ENTITY-VENDORTYPE-OID-MIB::hpnicfevtPortRt-Vi,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.3.1.10.3.41,HPN-ICF-ENTITY-VENDORTYPE-OID-MIB::hpnicfevtPortRt-Adls2Plus,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.3.1.10.3.42,HPN-ICF-ENTITY-VENDORTYPE-OID-MIB::hpnicfevtPortRt-RADIO-AG,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.3.1.10.3.43,HPN-ICF-ENTITY-VENDORTYPE-OID-MIB::hpnicfevtPortRt-1exp,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.3.1.10.3.44,HPN-ICF-ENTITY-VENDORTYPE-OID-MIB::hpnicfevtPortRt-G-SHDSL-BIS,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.3.1.10.3.45,HPN-ICF-ENTITY-VENDORTYPE-OID-MIB::hpnicfevtPortRt-ONU-1000BASE-BX-SFF-SC,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.3.1.10.3.46,HPN-ICF-ENTITY-VENDORTYPE-OID-MIB::hpnicfevtPortRt-CELLULAR,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.3.1.10.3.47,HPN-ICF-ENTITY-VENDORTYPE-OID-MIB::hpnicfevtPortRt-CELLULAR-ETHERNET,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.3.1.10.3.48,HPN-ICF-ENTITY-VENDORTYPE-OID-MIB::hpnicfevtPortRt-VGe,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.3.1.10.3.49,HPN-ICF-ENTITY-VENDORTYPE-OID-MIB::hpnicfevtPortRt-VXGe,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.3.1.10.3.50,HPN-ICF-ENTITY-VENDORTYPE-OID-MIB::hpnicfevtPortRt-Xpos,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.3.1.10.3.51,HPN-ICF-ENTITY-VENDORTYPE-OID-MIB::hpnicfevtPortRt-Fge,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.3.1.10.4,HPN-ICF-ENTITY-VENDORTYPE-OID-MIB::hpnicfevtPortSwitchType,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.3.1.10.4.1,HPN-ICF-ENTITY-VENDORTYPE-OID-MIB::hpnicfevtPortSw-10or100M,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.3.1.10.4.2,HPN-ICF-ENTITY-VENDORTYPE-OID-MIB::hpnicfevtPortSw-1000BaseLxSm,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.3.1.10.4.3,HPN-ICF-ENTITY-VENDORTYPE-OID-MIB::hpnicfevtPortSw-1000BaseSxMm,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.3.1.10.4.4,HPN-ICF-ENTITY-VENDORTYPE-OID-MIB::hpnicfevtPortSw-1000BaseTx,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.3.1.10.4.5,HPN-ICF-ENTITY-VENDORTYPE-OID-MIB::hpnicfevtPortSw-100MSinglemodeFx,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.3.1.10.4.6,HPN-ICF-ENTITY-VENDORTYPE-OID-MIB::hpnicfevtPortSw-100MMultimodeFx,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.3.1.10.4.7,HPN-ICF-ENTITY-VENDORTYPE-OID-MIB::hpnicfevtPortSw-100M100BaseTx,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.3.1.10.4.8,HPN-ICF-ENTITY-VENDORTYPE-OID-MIB::hpnicfevtPortSw-100MHub,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.3.1.10.4.9,HPN-ICF-ENTITY-VENDORTYPE-OID-MIB::hpnicfevtPortSw-Vdsl,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.3.1.10.4.10,HPN-ICF-ENTITY-VENDORTYPE-OID-MIB::hpnicfevtPortSw-Stack,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.3.1.10.4.11,HPN-ICF-ENTITY-VENDORTYPE-OID-MIB::hpnicfevtPortSw-1000BaseZenithFx,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.3.1.10.4.12,HPN-ICF-ENTITY-VENDORTYPE-OID-MIB::hpnicfevtPortSw-1000BaseLongFx,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.3.1.10.4.13,HPN-ICF-ENTITY-VENDORTYPE-OID-MIB::hpnicfevtPortSw-Adsl,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.3.1.10.4.14,HPN-ICF-ENTITY-VENDORTYPE-OID-MIB::hpnicfevtPortSw-10or100MDb,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.3.1.10.4.15,HPN-ICF-ENTITY-VENDORTYPE-OID-MIB::hpnicfevtPortSw-10GBaseLrSm,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.3.1.10.4.16,HPN-ICF-ENTITY-VENDORTYPE-OID-MIB::hpnicfevtPortSw-10GBaseLx4Mm,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.3.1.10.4.17,HPN-ICF-ENTITY-VENDORTYPE-OID-MIB::hpnicfevtPortSw-10GBaseLx4Sm,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.3.1.10.4.18,HPN-ICF-ENTITY-VENDORTYPE-OID-MIB::hpnicfevtPortSw-100MLongFx,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.3.1.10.4.19,HPN-ICF-ENTITY-VENDORTYPE-OID-MIB::hpnicfevtPortSw-1000BaseCx,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.3.1.10.4.20,HPN-ICF-ENTITY-VENDORTYPE-OID-MIB::hpnicfevtPortSw-1000BaseZenithFxLc,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.3.1.10.4.21,HPN-ICF-ENTITY-VENDORTYPE-OID-MIB::hpnicfevtPortSw-1000BaseLongFxLc,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.3.1.10.4.22,HPN-ICF-ENTITY-VENDORTYPE-OID-MIB::hpnicfevtPortSw-100MSmFxSc,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.3.1.10.4.23,HPN-ICF-ENTITY-VENDORTYPE-OID-MIB::hpnicfevtPortSw-100MMmFxSc,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.3.1.10.4.24,HPN-ICF-ENTITY-VENDORTYPE-OID-MIB::hpnicfevtPortSw-100MSmFxLc,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.3.1.10.4.25,HPN-ICF-ENTITY-VENDORTYPE-OID-MIB::hpnicfevtPortSw-100MMmFxLc,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.3.1.10.4.26,HPN-ICF-ENTITY-VENDORTYPE-OID-MIB::hpnicfevtPortSw-GbicNoConnector,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.3.1.10.4.27,HPN-ICF-ENTITY-VENDORTYPE-OID-MIB::hpnicfevtPortSw-Gbic1000BaseT,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.3.1.10.4.28,HPN-ICF-ENTITY-VENDORTYPE-OID-MIB::hpnicfevtPortSw-Gbic1000BaseLx,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.3.1.10.4.29,HPN-ICF-ENTITY-VENDORTYPE-OID-MIB::hpnicfevtPortSw-Gbic1000BaseSx,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.3.1.10.4.30,HPN-ICF-ENTITY-VENDORTYPE-OID-MIB::hpnicfevtPortSw-Gbic1000BaseZx,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.3.1.10.4.31,HPN-ICF-ENTITY-VENDORTYPE-OID-MIB::hpnicfevtPortSw-ComboNoConnector,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.3.1.10.4.32,HPN-ICF-ENTITY-VENDORTYPE-OID-MIB::hpnicfevtPortSw-Combo1000BaseLx,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.3.1.10.4.33,HPN-ICF-ENTITY-VENDORTYPE-OID-MIB::hpnicfevtPortSw-Combo1000BaseLxFiber,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.3.1.10.4.34,HPN-ICF-ENTITY-VENDORTYPE-OID-MIB::hpnicfevtPortSw-Combo1000BaseLxCopper,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.3.1.10.4.35,HPN-ICF-ENTITY-VENDORTYPE-OID-MIB::hpnicfevtPortSw-Combo1000BaseSx,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.3.1.10.4.36,HPN-ICF-ENTITY-VENDORTYPE-OID-MIB::hpnicfevtPortSw-Combo1000BaseSxFiber,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.3.1.10.4.37,HPN-ICF-ENTITY-VENDORTYPE-OID-MIB::hpnicfevtPortSw-Combo1000BaseSxCopper,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.3.1.10.4.38,HPN-ICF-ENTITY-VENDORTYPE-OID-MIB::hpnicfevtPortSw-Combo1000BaseZx,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.3.1.10.4.39,HPN-ICF-ENTITY-VENDORTYPE-OID-MIB::hpnicfevtPortSw-Combo1000BaseZxFiber,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.3.1.10.4.40,HPN-ICF-ENTITY-VENDORTYPE-OID-MIB::hpnicfevtPortSw-Combo1000BaseZxCopper,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.3.1.10.4.41,HPN-ICF-ENTITY-VENDORTYPE-OID-MIB::hpnicfevtPortSw-155PosSxMmf,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.3.1.10.4.42,HPN-ICF-ENTITY-VENDORTYPE-OID-MIB::hpnicfevtPortSw-155PosLxSmf,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.3.1.10.4.43,HPN-ICF-ENTITY-VENDORTYPE-OID-MIB::hpnicfevtPortSw-1000BASE-T,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.3.1.10.4.44,HPN-ICF-ENTITY-VENDORTYPE-OID-MIB::hpnicfevtPortSw-1000BASE-SX-SFP,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.3.1.10.4.45,HPN-ICF-ENTITY-VENDORTYPE-OID-MIB::hpnicfevtPortSw-1000BASE-LX-SFP,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.3.1.10.4.46,HPN-ICF-ENTITY-VENDORTYPE-OID-MIB::hpnicfevtPortSw-1000BASE-T-AN-SFP,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.3.1.10.4.47,HPN-ICF-ENTITY-VENDORTYPE-OID-MIB::hpnicfevtPortSw-10GBASE-LX4-XENPAK,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.3.1.10.4.48,HPN-ICF-ENTITY-VENDORTYPE-OID-MIB::hpnicfevtPortSw-10GBASE-LR-XENPAK,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.3.1.10.4.49,HPN-ICF-ENTITY-VENDORTYPE-OID-MIB::hpnicfevtPortSw-10GBASE-CX4,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.3.1.10.4.50,HPN-ICF-ENTITY-VENDORTYPE-OID-MIB::hpnicfevtPortSw-1000BASE-ZX-SFP,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.3.1.10.4.51,HPN-ICF-ENTITY-VENDORTYPE-OID-MIB::hpnicfevtPortSw-1000BASE-MM-SFP,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.3.1.10.4.52,HPN-ICF-ENTITY-VENDORTYPE-OID-MIB::hpnicfevtPortSw-100BASE-SX-SFP,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.3.1.10.4.53,HPN-ICF-ENTITY-VENDORTYPE-OID-MIB::hpnicfevtPortSw-100BASE-LX-SFP,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.3.1.10.4.54,HPN-ICF-ENTITY-VENDORTYPE-OID-MIB::hpnicfevtPortSw-100BASE-T-AN-SFP,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.3.1.10.4.55,HPN-ICF-ENTITY-VENDORTYPE-OID-MIB::hpnicfevtPortSw-100BASE-ZX-SFP,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.3.1.10.4.56,HPN-ICF-ENTITY-VENDORTYPE-OID-MIB::hpnicfevtPortSw-100BASE-MM-SFP,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.3.1.10.4.57,HPN-ICF-ENTITY-VENDORTYPE-OID-MIB::hpnicfevtPortSw-SFP-NO-CONNECTOR,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.3.1.10.4.58,HPN-ICF-ENTITY-VENDORTYPE-OID-MIB::hpnicfevtPortSw-SFP-UNKNOWN-CONNECTOR,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.3.1.10.4.59,HPN-ICF-ENTITY-VENDORTYPE-OID-MIB::hpnicfevtPortSw-POS-NO-CONNECTOR,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.3.1.10.4.60,HPN-ICF-ENTITY-VENDORTYPE-OID-MIB::hpnicfevtPortSw-10G-BASE-SR,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.3.1.10.4.61,HPN-ICF-ENTITY-VENDORTYPE-OID-MIB::hpnicfevtPortSw-10G-BASE-ER,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.3.1.10.4.62,HPN-ICF-ENTITY-VENDORTYPE-OID-MIB::hpnicfevtPortSw-10G-BASE-LX4,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.3.1.10.4.63,HPN-ICF-ENTITY-VENDORTYPE-OID-MIB::hpnicfevtPortSw-10G-BASE-SW,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.3.1.10.4.64,HPN-ICF-ENTITY-VENDORTYPE-OID-MIB::hpnicfevtPortSw-10G-BASE-LW,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.3.1.10.4.65,HPN-ICF-ENTITY-VENDORTYPE-OID-MIB::hpnicfevtPortSw-10G-BASE-EW,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.3.1.10.4.66,HPN-ICF-ENTITY-VENDORTYPE-OID-MIB::hpnicfevtPortSw-10G-LR-SM-LC,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.3.1.10.4.67,HPN-ICF-ENTITY-VENDORTYPE-OID-MIB::hpnicfevtPortSw-10G-SR-MM-LC,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.3.1.10.4.68,HPN-ICF-ENTITY-VENDORTYPE-OID-MIB::hpnicfevtPortSw-10G-ER-SM-LC,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.3.1.10.4.69,HPN-ICF-ENTITY-VENDORTYPE-OID-MIB::hpnicfevtPortSw-10G-LW-SM-LC,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.3.1.10.4.70,HPN-ICF-ENTITY-VENDORTYPE-OID-MIB::hpnicfevtPortSw-10G-SW-MM-LC,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.3.1.10.4.71,HPN-ICF-ENTITY-VENDORTYPE-OID-MIB::hpnicfevtPortSw-10G-EW-SM-LC,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.3.1.10.4.72,HPN-ICF-ENTITY-VENDORTYPE-OID-MIB::hpnicfevtPortSw-100BASE-SM-MTRJ,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.3.1.10.4.73,HPN-ICF-ENTITY-VENDORTYPE-OID-MIB::hpnicfevtPortSw-100BASE-MM-MTRJ,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.3.1.10.4.74,HPN-ICF-ENTITY-VENDORTYPE-OID-MIB::hpnicfevtPortSw-XFP-NO-CONNECTOR,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.3.1.10.4.75,HPN-ICF-ENTITY-VENDORTYPE-OID-MIB::hpnicfevtPortSw-XFP-10GBASE-SR,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.3.1.10.4.76,HPN-ICF-ENTITY-VENDORTYPE-OID-MIB::hpnicfevtPortSw-XFP-10GBASE-LR,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.3.1.10.4.77,HPN-ICF-ENTITY-VENDORTYPE-OID-MIB::hpnicfevtPortSw-XFP-10GBASE-ER,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.3.1.10.4.78,HPN-ICF-ENTITY-VENDORTYPE-OID-MIB::hpnicfevtPortSw-XFP-10GBASE-SW,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.3.1.10.4.79,HPN-ICF-ENTITY-VENDORTYPE-OID-MIB::hpnicfevtPortSw-XFP-10GBASE-LW,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.3.1.10.4.80,HPN-ICF-ENTITY-VENDORTYPE-OID-MIB::hpnicfevtPortSw-XFP-10GBASE-EW,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.3.1.10.4.81,HPN-ICF-ENTITY-VENDORTYPE-OID-MIB::hpnicfevtPortSw-XFP-10GBASE-CX4,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.3.1.10.4.82,HPN-ICF-ENTITY-VENDORTYPE-OID-MIB::hpnicfevtPortSw-XFP-10GBASE-LX4,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.3.1.10.4.83,HPN-ICF-ENTITY-VENDORTYPE-OID-MIB::hpnicfevtPortSw-XFP-UNKNOWN,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.3.1.10.4.84,HPN-ICF-ENTITY-VENDORTYPE-OID-MIB::hpnicfevtPortSw-XPK-NOCONNECTOR,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.3.1.10.4.85,HPN-ICF-ENTITY-VENDORTYPE-OID-MIB::hpnicfevtPortSw-XPK-10GBASE-SR,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.3.1.10.4.86,HPN-ICF-ENTITY-VENDORTYPE-OID-MIB::hpnicfevtPortSw-XPK-10GBASE-LR,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.3.1.10.4.87,HPN-ICF-ENTITY-VENDORTYPE-OID-MIB::hpnicfevtPortSw-XPK-10GBASE-ER,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.3.1.10.4.88,HPN-ICF-ENTITY-VENDORTYPE-OID-MIB::hpnicfevtPortSw-XPK-10GBASE-SW,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.3.1.10.4.89,HPN-ICF-ENTITY-VENDORTYPE-OID-MIB::hpnicfevtPortSw-XPK-10GBASE-LW,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.3.1.10.4.90,HPN-ICF-ENTITY-VENDORTYPE-OID-MIB::hpnicfevtPortSw-XPK-10GBASE-EW,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.3.1.10.4.91,HPN-ICF-ENTITY-VENDORTYPE-OID-MIB::hpnicfevtPortSw-XPK-10GBASE-CX4,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.3.1.10.4.92,HPN-ICF-ENTITY-VENDORTYPE-OID-MIB::hpnicfevtPortSw-XPK-10GBASE-LX4,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.3.1.10.4.93,HPN-ICF-ENTITY-VENDORTYPE-OID-MIB::hpnicfevtPortSw-XPK-UNKNOWN,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.3.1.10.4.94,HPN-ICF-ENTITY-VENDORTYPE-OID-MIB::hpnicfevtPortSw-POS-OC48-SR-SM-LC,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.3.1.10.4.95,HPN-ICF-ENTITY-VENDORTYPE-OID-MIB::hpnicfevtPortSw-POS-OC48-IR-SM-LC,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.3.1.10.4.96,HPN-ICF-ENTITY-VENDORTYPE-OID-MIB::hpnicfevtPortSw-POS-OC48-LR-SM-LC,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.3.1.10.4.97,HPN-ICF-ENTITY-VENDORTYPE-OID-MIB::hpnicfevtPortSw-10G-BASE-CX4,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.3.1.10.4.98,HPN-ICF-ENTITY-VENDORTYPE-OID-MIB::hpnicfevtPortSw-OLT-1000BASE-BX-SFF-SC,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.3.1.10.4.99,HPN-ICF-ENTITY-VENDORTYPE-OID-MIB::hpnicfevtPortSw-ONU-1000BASE-BX-SFF-SC,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.3.1.10.4.100,HPN-ICF-ENTITY-VENDORTYPE-OID-MIB::hpnicfevtPortSw-24G-CASCADE,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.3.1.10.4.101,HPN-ICF-ENTITY-VENDORTYPE-OID-MIB::hpnicfevtPortSw-POS-OC3-SR-MM,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.3.1.10.4.102,HPN-ICF-ENTITY-VENDORTYPE-OID-MIB::hpnicfevtPortSw-POS-OC3-IR-SM,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.3.1.10.4.103,HPN-ICF-ENTITY-VENDORTYPE-OID-MIB::hpnicfevtPortSw-POS-OC3-IR-1-SM,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.3.1.10.4.104,HPN-ICF-ENTITY-VENDORTYPE-OID-MIB::hpnicfevtPortSw-POS-OC3-IR-2-SM,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.3.1.10.4.105,HPN-ICF-ENTITY-VENDORTYPE-OID-MIB::hpnicfevtPortSw-POS-OC3-LR-SM,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.3.1.10.4.106,HPN-ICF-ENTITY-VENDORTYPE-OID-MIB::hpnicfevtPortSw-POS-OC3-LR-1-SM,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.3.1.10.4.107,HPN-ICF-ENTITY-VENDORTYPE-OID-MIB::hpnicfevtPortSw-POS-OC3-LR-2-SM,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.3.1.10.4.108,HPN-ICF-ENTITY-VENDORTYPE-OID-MIB::hpnicfevtPortSw-POS-OC3-LR-3-SM,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.3.1.10.4.109,HPN-ICF-ENTITY-VENDORTYPE-OID-MIB::hpnicfevtPortSw-POS-OC12-SR-MM,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.3.1.10.4.110,HPN-ICF-ENTITY-VENDORTYPE-OID-MIB::hpnicfevtPortSw-POS-OC12-IR-SM,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.3.1.10.4.111,HPN-ICF-ENTITY-VENDORTYPE-OID-MIB::hpnicfevtPortSw-POS-OC12-IR-1-SM,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.3.1.10.4.112,HPN-ICF-ENTITY-VENDORTYPE-OID-MIB::hpnicfevtPortSw-POS-OC12-IR-2-SM,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.3.1.10.4.113,HPN-ICF-ENTITY-VENDORTYPE-OID-MIB::hpnicfevtPortSw-POS-OC12-LR-SM,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.3.1.10.4.114,HPN-ICF-ENTITY-VENDORTYPE-OID-MIB::hpnicfevtPortSw-POS-OC12-LR-1-SM,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.3.1.10.4.115,HPN-ICF-ENTITY-VENDORTYPE-OID-MIB::hpnicfevtPortSw-POS-OC12-LR-2-SM,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.3.1.10.4.116,HPN-ICF-ENTITY-VENDORTYPE-OID-MIB::hpnicfevtPortSw-POS-OC12-LR-3-SM,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.3.1.10.4.117,HPN-ICF-ENTITY-VENDORTYPE-OID-MIB::hpnicfevtPortSw-POS-OC48-SR-SM,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.3.1.10.4.118,HPN-ICF-ENTITY-VENDORTYPE-OID-MIB::hpnicfevtPortSw-POS-OC48-IR-SM,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.3.1.10.4.119,HPN-ICF-ENTITY-VENDORTYPE-OID-MIB::hpnicfevtPortSw-POS-OC48-IR-1-SM,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.3.1.10.4.120,HPN-ICF-ENTITY-VENDORTYPE-OID-MIB::hpnicfevtPortSw-POS-OC48-IR-2-SM,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.3.1.10.4.121,HPN-ICF-ENTITY-VENDORTYPE-OID-MIB::hpnicfevtPortSw-POS-OC48-LR-SM,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.3.1.10.4.122,HPN-ICF-ENTITY-VENDORTYPE-OID-MIB::hpnicfevtPortSw-POS-OC48-LR-1-SM,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.3.1.10.4.123,HPN-ICF-ENTITY-VENDORTYPE-OID-MIB::hpnicfevtPortSw-POS-OC48-LR-2-SM,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.3.1.10.4.124,HPN-ICF-ENTITY-VENDORTYPE-OID-MIB::hpnicfevtPortSw-POS-OC48-LR-3-SM,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.3.1.10.4.125,HPN-ICF-ENTITY-VENDORTYPE-OID-MIB::hpnicfevtPortSw-POS-I-64-1,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.3.1.10.4.126,HPN-ICF-ENTITY-VENDORTYPE-OID-MIB::hpnicfevtPortSw-POS-I-64-2,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.3.1.10.4.127,HPN-ICF-ENTITY-VENDORTYPE-OID-MIB::hpnicfevtPortSw-POS-I-64-3,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.3.1.10.4.128,HPN-ICF-ENTITY-VENDORTYPE-OID-MIB::hpnicfevtPortSw-POS-I-64-5,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.3.1.10.4.129,HPN-ICF-ENTITY-VENDORTYPE-OID-MIB::hpnicfevtPortSw-POS-S-64-1,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.3.1.10.4.130,HPN-ICF-ENTITY-VENDORTYPE-OID-MIB::hpnicfevtPortSw-POS-S-64-2,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.3.1.10.4.131,HPN-ICF-ENTITY-VENDORTYPE-OID-MIB::hpnicfevtPortSw-POS-S-64-3,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.3.1.10.4.132,HPN-ICF-ENTITY-VENDORTYPE-OID-MIB::hpnicfevtPortSw-POS-S-64-5,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.3.1.10.4.133,HPN-ICF-ENTITY-VENDORTYPE-OID-MIB::hpnicfevtPortSw-POS-L-64-1,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.3.1.10.4.134,HPN-ICF-ENTITY-VENDORTYPE-OID-MIB::hpnicfevtPortSw-POS-L-64-2,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.3.1.10.4.135,HPN-ICF-ENTITY-VENDORTYPE-OID-MIB::hpnicfevtPortSw-POS-L-64-3,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.3.1.10.4.136,HPN-ICF-ENTITY-VENDORTYPE-OID-MIB::hpnicfevtPortSw-POS-V-64-2,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.3.1.10.4.137,HPN-ICF-ENTITY-VENDORTYPE-OID-MIB::hpnicfevtPortSw-POS-V-64-3,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.3.1.10.4.138,HPN-ICF-ENTITY-VENDORTYPE-OID-MIB::hpnicfevtPortSw-100BASE-FX-BIDI,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.3.1.10.4.139,HPN-ICF-ENTITY-VENDORTYPE-OID-MIB::hpnicfevtPortSw-100BASE-BX10-U-SFP,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.3.1.10.4.140,HPN-ICF-ENTITY-VENDORTYPE-OID-MIB::hpnicfevtPortSw-100BASE-BX10-D-SFP,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.3.1.10.4.141,HPN-ICF-ENTITY-VENDORTYPE-OID-MIB::hpnicfevtPortSw-1000BASE-BX10-U-SFP,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.3.1.10.4.142,HPN-ICF-ENTITY-VENDORTYPE-OID-MIB::hpnicfevtPortSw-1000BASE-BX10-D-SFP,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.3.1.10.4.143,HPN-ICF-ENTITY-VENDORTYPE-OID-MIB::hpnicfevtPortSw-STK-1000BASE-T,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.3.1.10.4.144,HPN-ICF-ENTITY-VENDORTYPE-OID-MIB::hpnicfevtPortSw-RPR-PHYPOS-CONNECTOR,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.3.1.10.4.145,HPN-ICF-ENTITY-VENDORTYPE-OID-MIB::hpnicfevtPortSw-RPR-PHY10GE-CONNECTOR,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.3.1.10.4.146,HPN-ICF-ENTITY-VENDORTYPE-OID-MIB::hpnicfevtPortSw-RPR-LOGICPOS-CONNECTOR,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.3.1.10.4.147,HPN-ICF-ENTITY-VENDORTYPE-OID-MIB::hpnicfevtPortSw-RPR-LOGIC10GE-CONNECTOR,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.3.1.10.4.148,HPN-ICF-ENTITY-VENDORTYPE-OID-MIB::hpnicfevtPortSw-10GBASE-ZR,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.3.1.10.4.149,HPN-ICF-ENTITY-VENDORTYPE-OID-MIB::hpnicfevtPortSw-TYPE-ERROR-CONNECTOR,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.3.1.10.4.150,HPN-ICF-ENTITY-VENDORTYPE-OID-MIB::hpnicfevtPortSw-10G-STACK,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.3.1.10.4.151,HPN-ICF-ENTITY-VENDORTYPE-OID-MIB::hpnicfevtPortSw-155-ATM-SX-MMF,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.3.1.10.4.152,HPN-ICF-ENTITY-VENDORTYPE-OID-MIB::hpnicfevtPortSw-155-ATM-LX-SMF,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.3.1.10.4.153,HPN-ICF-ENTITY-VENDORTYPE-OID-MIB::hpnicfevtPortSw-622-ATM-SX-MMF,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.3.1.10.4.154,HPN-ICF-ENTITY-VENDORTYPE-OID-MIB::hpnicfevtPortSw-622-ATM-LX-SMF,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.3.1.10.4.155,HPN-ICF-ENTITY-VENDORTYPE-OID-MIB::hpnicfevtPortSw-155-ATM-NO-CONNECTOR,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.3.1.10.4.156,HPN-ICF-ENTITY-VENDORTYPE-OID-MIB::hpnicfevtPortSw-622-ATM-NO-CONNECTOR,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.3.1.10.4.157,HPN-ICF-ENTITY-VENDORTYPE-OID-MIB::hpnicfevtPortSw-155-CPOS-E1-NO-CONNECTOR,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.3.1.10.4.158,HPN-ICF-ENTITY-VENDORTYPE-OID-MIB::hpnicfevtPortSw-155-CPOS-T1-NO-CONNECTOR,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.3.1.10.4.159,HPN-ICF-ENTITY-VENDORTYPE-OID-MIB::hpnicfevtPortSw-622-CPOS-E1-NO-CONNECTOR,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.3.1.10.4.160,HPN-ICF-ENTITY-VENDORTYPE-OID-MIB::hpnicfevtPortSw-622-CPOS-T1-NO-CONNECTOR,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.3.1.10.4.161,HPN-ICF-ENTITY-VENDORTYPE-OID-MIB::hpnicfevtPortSw-155-CPOS-E1-SX-MMF,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.3.1.10.4.162,HPN-ICF-ENTITY-VENDORTYPE-OID-MIB::hpnicfevtPortSw-155-CPOS-T1-SX-MMF,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.3.1.10.4.163,HPN-ICF-ENTITY-VENDORTYPE-OID-MIB::hpnicfevtPortSw-155-CPOS-E1-LX-SMF,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.3.1.10.4.164,HPN-ICF-ENTITY-VENDORTYPE-OID-MIB::hpnicfevtPortSw-155-CPOS-T1-LX-SMF,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.3.1.10.4.165,HPN-ICF-ENTITY-VENDORTYPE-OID-MIB::hpnicfevtPortSw-622-CPOS-E1-SX-MMF,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.3.1.10.4.166,HPN-ICF-ENTITY-VENDORTYPE-OID-MIB::hpnicfevtPortSw-622-CPOS-T1-SX-MMF,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.3.1.10.4.167,HPN-ICF-ENTITY-VENDORTYPE-OID-MIB::hpnicfevtPortSw-622-CPOS-E1-LX-SMF,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.3.1.10.4.168,HPN-ICF-ENTITY-VENDORTYPE-OID-MIB::hpnicfevtPortSw-622-CPOS-T1-LX-SMF,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.3.1.10.4.169,HPN-ICF-ENTITY-VENDORTYPE-OID-MIB::hpnicfevtPortSw-E1-CONNECTOR,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.3.1.10.4.170,HPN-ICF-ENTITY-VENDORTYPE-OID-MIB::hpnicfevtPortSw-T1-CONNECTOR,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.3.1.10.4.171,HPN-ICF-ENTITY-VENDORTYPE-OID-MIB::hpnicfevtPortSw-1000BASE-STK-SFP,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.3.1.10.4.172,HPN-ICF-ENTITY-VENDORTYPE-OID-MIB::hpnicfevtPortSw-1000BASE-BIDI-SFP,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.3.1.10.4.173,HPN-ICF-ENTITY-VENDORTYPE-OID-MIB::hpnicfevtPortSw-1000BASE-CWDM-SFP,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.3.1.10.4.174,HPN-ICF-ENTITY-VENDORTYPE-OID-MIB::hpnicfevtPortSw-100BASE-BIDI-SFP,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.3.1.10.4.175,HPN-ICF-ENTITY-VENDORTYPE-OID-MIB::hpnicfevtPortSw-OLT-1000BASE-PX-SFP,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.3.1.10.4.176,HPN-ICF-ENTITY-VENDORTYPE-OID-MIB::hpnicfevtPortSw-OLT-1000BASE-NO-CONNECTOR,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.3.1.10.4.177,HPN-ICF-ENTITY-VENDORTYPE-OID-MIB::hpnicfevtPortSw-RPR-PHYGE-CONNECTOR,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.3.1.10.4.178,HPN-ICF-ENTITY-VENDORTYPE-OID-MIB::hpnicfevtPortSw-RPR-LOGICGE-CONNECTOR,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.3.1.10.4.179,HPN-ICF-ENTITY-VENDORTYPE-OID-MIB::hpnicfevtPortSw-100M-1550-BIDI,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.3.1.10.4.180,HPN-ICF-ENTITY-VENDORTYPE-OID-MIB::hpnicfevtPortSw-100M-1310-BIDI,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.3.1.10.4.181,HPN-ICF-ENTITY-VENDORTYPE-OID-MIB::hpnicfevtPortSw-RPR-PHYOC48-CONNECTOR,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.3.1.10.4.182,HPN-ICF-ENTITY-VENDORTYPE-OID-MIB::hpnicfevtPortSw-RPR-LOGICOC48-CONNECTOR,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.3.1.10.4.183,HPN-ICF-ENTITY-VENDORTYPE-OID-MIB::hpnicfevtPortSw-100-1000-BASE-LX-SMF,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.3.1.10.4.184,HPN-ICF-ENTITY-VENDORTYPE-OID-MIB::hpnicfevtPortSw-10G-ZW-SM-LC,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.3.1.10.4.185,HPN-ICF-ENTITY-VENDORTYPE-OID-MIB::hpnicfevtPortSw-10G-ZR-SM-LC,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.3.1.10.4.186,HPN-ICF-ENTITY-VENDORTYPE-OID-MIB::hpnicfevtPortSw-XPK-10GBASE-ZR,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.3.1.10.4.187,HPN-ICF-ENTITY-VENDORTYPE-OID-MIB::hpnicfevtPortSw-SGMII-100-BASE-LX-SFP,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.3.1.10.4.188,HPN-ICF-ENTITY-VENDORTYPE-OID-MIB::hpnicfevtPortSw-SGMII-100-BASE-FX-SFP,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.3.1.10.4.189,HPN-ICF-ENTITY-VENDORTYPE-OID-MIB::hpnicfevtPortSw-WLAN-RADIO,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.3.1.10.4.190,HPN-ICF-ENTITY-VENDORTYPE-OID-MIB::hpnicfevtPortSw-CABLE,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.3.1.10.4.191,HPN-ICF-ENTITY-VENDORTYPE-OID-MIB::hpnicfevtPortSw-SFP-PLUS-NO-CONNECTOR,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.3.1.10.4.192,HPN-ICF-ENTITY-VENDORTYPE-OID-MIB::hpnicfevtPortSw-SFP-PLUS-10GBASE-SR,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.3.1.10.4.193,HPN-ICF-ENTITY-VENDORTYPE-OID-MIB::hpnicfevtPortSw-SFP-PLUS-10GBASE-LR,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.3.1.10.4.194,HPN-ICF-ENTITY-VENDORTYPE-OID-MIB::hpnicfevtPortSw-SFP-PLUS-10GBASE-LRM,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.3.1.10.4.195,HPN-ICF-ENTITY-VENDORTYPE-OID-MIB::hpnicfevtPortSw-SFP-PLUS-10GBASE-Cu,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.3.1.10.4.196,HPN-ICF-ENTITY-VENDORTYPE-OID-MIB::hpnicfevtPortSw-SFP-PLUS-UNKNOWN,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.3.1.10.4.197,HPN-ICF-ENTITY-VENDORTYPE-OID-MIB::hpnicfevtPortSw-SFP-PLUS-STACK-CONNECTOR,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.3.1.10.4.198,HPN-ICF-ENTITY-VENDORTYPE-OID-MIB::hpnicfevtPortSw-POS-L-64-4,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.3.1.10.4.199,HPN-ICF-ENTITY-VENDORTYPE-OID-MIB::hpnicfevtPortSw-MINISAS-HD-STACK-CONNECTOR,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.3.1.10.4.200,HPN-ICF-ENTITY-VENDORTYPE-OID-MIB::hpnicfevtPortSw-ONU-1000BASE-PX-SFF,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.3.1.10.4.201,HPN-ICF-ENTITY-VENDORTYPE-OID-MIB::hpnicfevtPortSw-RS485,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.3.1.10.4.202,HPN-ICF-ENTITY-VENDORTYPE-OID-MIB::hpnicfevtPortSw-SFP-PLUS-10GBASE-ER,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.3.1.10.4.203,HPN-ICF-ENTITY-VENDORTYPE-OID-MIB::hpnicfevtPortSw-SFP-PLUS-10GBASE-ZR,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.3.1.10.4.204,HPN-ICF-ENTITY-VENDORTYPE-OID-MIB::hpnicfevtPortSw-XFP-10GBASE-ZR,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.3.1.10.4.205,HPN-ICF-ENTITY-VENDORTYPE-OID-MIB::hpnicfevtPortSw-QSFP-PLUS-40GBASE-SR4,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.3.1.10.4.206,HPN-ICF-ENTITY-VENDORTYPE-OID-MIB::hpnicfevtPortSw-QSFP-PLUS-STACK-CONNECTOR,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.3.1.10.4.207,HPN-ICF-ENTITY-VENDORTYPE-OID-MIB::hpnicfevtPortSw-QSFP-PLUS-TO-4SFP-PLUS-STACK-CONNECTOR,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.3.1.10.4.208,HPN-ICF-ENTITY-VENDORTYPE-OID-MIB::hpnicfevtPortSw-SFP-STACK-CONNECTOR,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.3.1.10.4.209,HPN-ICF-ENTITY-VENDORTYPE-OID-MIB::hpnicfevtPortSw-QSFP-NO-CONNECTOR,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.3.1.10.4.210,HPN-ICF-ENTITY-VENDORTYPE-OID-MIB::hpnicfevtPortSw-10GBase-T,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.3.1.10.4.211,HPN-ICF-ENTITY-VENDORTYPE-OID-MIB::hpnicfevtPortSw-CFP-NO-CONNECTOR,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.3.1.10.4.212,HPN-ICF-ENTITY-VENDORTYPE-OID-MIB::hpnicfevtPortSw-CFP-40GBASE-LR4,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.3.1.10.4.213,HPN-ICF-ENTITY-VENDORTYPE-OID-MIB::hpnicfevtPortSw-QSFP-PLUS-NO-CONNECTOR,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.3.1.10.4.214,HPN-ICF-ENTITY-VENDORTYPE-OID-MIB::hpnicfevtPortSw-QSFP-PLUS-40GBASE-LR4,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.3.1.10.4.215,HPN-ICF-ENTITY-VENDORTYPE-OID-MIB::hpnicfevtPortSw-CFP-40GBASE-SR4,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.3.1.10.4.216,HPN-ICF-ENTITY-VENDORTYPE-OID-MIB::hpnicfevtPortSw-CFP-100GBASE-LR4,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.3.1.10.4.217,HPN-ICF-ENTITY-VENDORTYPE-OID-MIB::hpnicfevtPortSw-CFP-100GBASE-SR10,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.3.1.10.4.218,HPN-ICF-ENTITY-VENDORTYPE-OID-MIB::hpnicfevtPortSw-CXP-100GBASE-SR10,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.3.1.10.4.219,HPN-ICF-ENTITY-VENDORTYPE-OID-MIB::hpnicfevtPortSw-CXP-NO-CONNECTOR,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.3.1.10.4.220,HPN-ICF-ENTITY-VENDORTYPE-OID-MIB::hpnicfevtPortSw-TRANSCEIVER-UNKNOWN,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.3.1.10.4.221,HPN-ICF-ENTITY-VENDORTYPE-OID-MIB::hpnicfevtPortSw-QSFP-PLUS-UNKNOWN,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.3.1.10.4.222,HPN-ICF-ENTITY-VENDORTYPE-OID-MIB::hpnicfevtPortSw-CFP-UNKNOWN,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.3.1.10.4.223,HPN-ICF-ENTITY-VENDORTYPE-OID-MIB::hpnicfevtPortSw-QSFP-PLUS-40GBASE-CSR4,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.3.1.10.4.224,HPN-ICF-ENTITY-VENDORTYPE-OID-MIB::hpnicfevtPortSw-CFP-40GBASE-ER4,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.3.1.10.4.225,HPN-ICF-ENTITY-VENDORTYPE-OID-MIB::hpnicfevtPortSw-SFP-1000BASE-BIDI,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.3.1.10.4.226,HPN-ICF-ENTITY-VENDORTYPE-OID-MIB::hpnicfevtPortSw-SFP-PLUS-10GBASE-ZR-DWDM,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.3.1.10.4.227,HPN-ICF-ENTITY-VENDORTYPE-OID-MIB::hpnicfevtPortSw-QSFP-PLUS-40GBASE-PSM,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.3.1.10.4.228,HPN-ICF-ENTITY-VENDORTYPE-OID-MIB::hpnicfevtPortSw-SFP-8GFC-SW,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.3.1.10.4.229,HPN-ICF-ENTITY-VENDORTYPE-OID-MIB::hpnicfevtPortSw-SFP-8GFC-LW,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.3.1.10.4.230,HPN-ICF-ENTITY-VENDORTYPE-OID-MIB::hpnicfevtPortSw-CXP-100GBASE-AOC,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.3.1.10.4.231,HPN-ICF-ENTITY-VENDORTYPE-OID-MIB::hpnicfevtPortSw-QSFP-PLUS-ACTIVE-STACK-CONNECTOR,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.3.1.10.4.232,HPN-ICF-ENTITY-VENDORTYPE-OID-MIB::hpnicfevtPortSw-QSFP-PLUS-TO-4SFP-PLUS-ACTIVE-STACK-CONNECTOR,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.3.1.11,HPN-ICF-ENTITY-VENDORTYPE-OID-MIB::hpnicfevtStack,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.4,HPN-ICF-OID-MIB::hpnicfNM,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.6,HPN-ICF-OID-MIB::hpnicfSystem,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.6.5,HPN-ICF-COMMON-SYSTEM-MIB::hpnicfWriteConfig,INTEGER,read-write,,current,save(1),Write config to router.
.1.3.6.1.4.1.11.2.14.11.15.6.6,HPN-ICF-COMMON-SYSTEM-MIB::hpnicfStartFtpServer,INTEGER,read-write,,current,enable(1):disable(2),Decide whether start ftp-server.enable(1) indicates to start ftp-server; disable(2) indicates to stop ftp-server.
.1.3.6.1.4.1.11.2.14.11.15.6.7,HPN-ICF-COMMON-SYSTEM-MIB::hpnicfReboot,INTEGER,read-write,,current,normal(0):reboot(1),normal:do nothing. reboot :reboot the router. 'normal' will be returned when getting.
.1.3.6.1.4.1.11.2.14.11.15.6.8,HPN-ICF-COMMON-SYSTEM-MIB::hpnicfSystemNotification,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.6.8.1,HPN-ICF-COMMON-SYSTEM-MIB::hpnicfWriteSuccessTrap,,,,,,Send a trap about write success.
.1.3.6.1.4.1.11.2.14.11.15.6.8.2,HPN-ICF-COMMON-SYSTEM-MIB::hpnicfWriteFailureTrap,,,,,,Send a trap about write failure.
.1.3.6.1.4.1.11.2.14.11.15.6.8.3,HPN-ICF-COMMON-SYSTEM-MIB::hpnicfRebootSendTrap,,,,,,If a user restarts the device with command 'reboot', this trap will be sent two seconds before the device reboots.
.1.3.6.1.4.1.11.2.14.11.15.6.8.4,HPN-ICF-COMMON-SYSTEM-MIB::hpnicfSysColdStartTrap,,,,,,System cold start trap.
.1.3.6.1.4.1.11.2.14.11.15.6.8.5,HPN-ICF-COMMON-SYSTEM-MIB::hpnicfSysWarmStartTrap,,,,,,System warm start trap.
.1.3.6.1.4.1.11.2.14.11.15.6.8.6,HPN-ICF-COMMON-SYSTEM-MIB::hpnicfSysLoghostUnreachableTrap,,,,,,This notification will be sent when a loghost becomes unreachable.
.1.3.6.1.4.1.11.2.14.11.15.6.9,HPN-ICF-COMMON-SYSTEM-MIB::hpnicfSoftwareVersion,OCTET,read-only,,current,,Software version.
.1.3.6.1.4.1.11.2.14.11.15.6.10,HPN-ICF-COMMON-SYSTEM-MIB::hpnicfSysBootType,INTEGER,read-only,,current,coldStart(1):warmStart(2),Boot type of the system, indicates whether the last device reboot was by CLI (warm start) or power off (cold start).
.1.3.6.1.4.1.11.2.14.11.15.6.11,HPN-ICF-COMMON-SYSTEM-MIB::hpnicfSystemInfo,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.6.11.1,HPN-ICF-COMMON-SYSTEM-MIB::hpnicfSysStatisticPeriod,Integer32,read-write,,current,,Statistic period. The device collects statistics within the period.
.1.3.6.1.4.1.11.2.14.11.15.6.11.2,HPN-ICF-COMMON-SYSTEM-MIB::hpnicfSysSamplePeriod,Integer32,read-write,,current,,Sampling period. The device takes samples periodically for statistics collection.
.1.3.6.1.4.1.11.2.14.11.15.6.11.3,HPN-ICF-COMMON-SYSTEM-MIB::hpnicfSysTrapResendPeriod,Integer32,read-write,,current,,Trap resending period. If the value is zero, the trap will not be re-sent.
.1.3.6.1.4.1.11.2.14.11.15.6.11.4,HPN-ICF-COMMON-SYSTEM-MIB::hpnicfSysTrapCollectionPeriod,Integer32,read-write,,current,,Trap collecting period. If the value is zero, the trap will not be re-sent.
.1.3.6.1.4.1.11.2.14.11.15.6.11.5,HPN-ICF-COMMON-SYSTEM-MIB::hpnicfSysSnmpPort,Integer32,read-only,,current,,UDP port for SNMP protocol entity to receive messages except Trap-PDU.
.1.3.6.1.4.1.11.2.14.11.15.6.11.6,HPN-ICF-COMMON-SYSTEM-MIB::hpnicfSysSnmpTrapPort,Integer32,read-only,,current,,UDP port for Trap-PDU to receive messages.
.1.3.6.1.4.1.11.2.14.11.15.6.11.7,HPN-ICF-COMMON-SYSTEM-MIB::hpnicfSysNetID,OCTET,read-write,,current,,System Net ID.
.1.3.6.1.4.1.11.2.14.11.15.6.11.8,HPN-ICF-COMMON-SYSTEM-MIB::hpnicfSysLastSampleTime,OCTET,read-only,,current,,Last sampling time of the system.
.1.3.6.1.4.1.11.2.14.11.15.6.11.9,HPN-ICF-COMMON-SYSTEM-MIB::hpnicfSysTrapSendNum,Integer32,read-write,,current,,Maximum number of times for sending a trap. If the value is zero, a trap will be sent at an interval continually.
.1.3.6.1.4.1.11.2.14.11.15.6.11.10,HPN-ICF-COMMON-SYSTEM-MIB::hpnicfSysFirstTrapTime,TimeTicks,accessible-for-notify,,current,,Time when the first trap is sent.
.1.3.6.1.4.1.11.2.14.11.15.6.11.11,HPN-ICF-COMMON-SYSTEM-MIB::hpnicfSysBannerMOTD,OCTET,read-write,,current,,An administratively configured message that is displayed to the user when the user logs in to the device through the console port or Web interface.
.1.3.6.1.4.1.11.2.14.11.15.6.12,HPN-ICF-COMMON-SYSTEM-MIB::hpnicfSystemNotificationInfo,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.6.12.1,HPN-ICF-COMMON-SYSTEM-MIB::hpnicfSysLoghostIndex,Integer32,accessible-for-notify,,current,,Index of loghost.
.1.3.6.1.4.1.11.2.14.11.15.6.12.2,HPN-ICF-COMMON-SYSTEM-MIB::hpnicfSysLoghostIpaddressType,INTEGER,accessible-for-notify,,current,unknown(0):ipv4(1):ipv6(2):ipv4z(3):ipv6z(4):dns(16),IP address type of the loghost.
.1.3.6.1.4.1.11.2.14.11.15.6.12.3,HPN-ICF-COMMON-SYSTEM-MIB::hpnicfSysLoghostIpaddress,OCTET,accessible-for-notify,,current,,IP address of the loghost.
.1.3.6.1.4.1.11.2.14.11.15.6.12.4,HPN-ICF-COMMON-SYSTEM-MIB::hpnicfSysLoghostTrapVpnName,OCTET,accessible-for-notify,,current,,VPN name of the loghost.
.1.3.6.1.4.1.11.2.14.11.15.7,HPN-ICF-OID-MIB::hpnicfSNMPAgCpb,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.7.1,HPN-ICF-OID-MIB::hpnicfQosCapability,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.7.1.1,HPN-ICF-QOS-CAPABILITY-MIB::hpnicfQoSCapabilityMibObjects,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.7.1.1.1,HPN-ICF-QOS-CAPABILITY-MIB::hpnicfQoSCapabilityGroup,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.7.1.1.1.1,HPN-ICF-QOS-CAPABILITY-MIB::hpnicfQoSCapabilityTable,,not-accessible,,current,,A table of capability of QoS of system information.
.1.3.6.1.4.1.11.2.14.11.15.7.1.1.1.1.1,HPN-ICF-QOS-CAPABILITY-MIB::hpnicfQoSCapabilityEntry,,not-accessible,hpnicfQoSCapabilityPhysicalType:hpnicfQoSCapabilityPhysicalIndex:hpnicfQoSModuleIndex:hpnicfQoSCharacteristicsIndex,current,,Capability of QoS information entry.
.1.3.6.1.4.1.11.2.14.11.15.7.1.1.1.1.1.1,HPN-ICF-QOS-CAPABILITY-MIB::hpnicfQoSCapabilityPhysicalType,INTEGER,not-accessible,,current,stack(1):chassis(2):module(3):port(4),The concentric device supports 'chassis' and 'port'. The distributed device supports 'chassis', 'module' and 'port'. The Intelligent Resilient Framework System supports 'stack', 'chassis', 'module' and 'port'. 
.1.3.6.1.4.1.11.2.14.11.15.7.1.1.1.1.1.2,HPN-ICF-QOS-CAPABILITY-MIB::hpnicfQoSCapabilityPhysicalIndex,Integer32,not-accessible,,current,,Index of each physical entity. If hpnicfQoSCapabilityPhysicalType is 'stack', the value of this object is 0. If hpnicfQoSCapabilityPhysicalType is 'chassis' and 'module', the value of this object is equal to 'entPhysicalIndex', which is defined by 'ENTITY-MIB'. If hpnicfQoSCapabilityPhysicalType is 'port', the value of this object is equal to 'ifIndex', which is defined by 'RFC1213-MIB'. 
.1.3.6.1.4.1.11.2.14.11.15.7.1.1.1.1.1.3,HPN-ICF-QOS-CAPABILITY-MIB::hpnicfQoSModuleIndex,Integer32,not-accessible,,current,,The module index of QoS. QoS module: Index Characteristic 1 car module 2 gts module 3 lr module 4 hardware queue management module 5 wred module 6 priority mapping table module 7 colored priority mapping table module 8 port priority module 9 qos policy module 10 qos interface generic module 11 flow template module 12 vqos and vacl module 13 statistic module 21 carl module 22 fifo module 23 pq module 24 cq module 25 wfq module 26 rtpq module 
.1.3.6.1.4.1.11.2.14.11.15.7.1.1.1.1.1.4,HPN-ICF-QOS-CAPABILITY-MIB::hpnicfQoSCharacteristicsIndex,Integer32,not-accessible,,current,,The characteristics index of modules of QoS.
.1.3.6.1.4.1.11.2.14.11.15.7.1.1.1.1.1.5,HPN-ICF-QOS-CAPABILITY-MIB::hpnicfQoSCharacteristicsValue,Unsigned32,read-only,,current,,The characteristics value of modules of QoS. The type of value of characteristics. car module: Index Characteristic Value 1 car function 1, if supported. 2 match any 1, if supported. 3 match acl If last 8 bits of this object are set to 1, it indicates that the match acl type is supported, bit 0 stands for IPv6 basic acl, bit 1 stands for IPv6 advanced acl, bit 2 stands for mac acl, bit 3 stands for user acl, bit 4 stands for IPv6 user acl, bit 5 stands for IPv6 simple acl, bit 6 stands for IPv4 basic acl, bit 7 stands for IPv4 advanced acl. 4 match carl 1, if supported. 5 green action If last 10 bits of this object are set to 1, it indicates that the green action type is supported, bit 0 stands for continue, bit 1 stands for drop, bit 2 stands for transmit, bit 3 stands for setting prec, bit 4 stands for setting dscp, bit 5 stands for setting exp, bit 6 stands for setting atm clp, bit 7 stands for setting fr de, bit 8 stands for setting 802.1p, bit 9 stands for setting local precedence. 6 yellow action If last 10 bits of this object are set to 1, it indicates that the yellow action type is supported, and the mask is same to green action. 7 red action If last 10 bits of this object are set to 1, it indicates that the red action type is supported, and the mask is same to green action. 8 input 1, if supported. 9 output 1, if supported. 10 cir 1, if supported. 11 burst size 1, if supported. 12 excess burst size 1, if supported. 13 pir 1, if supported. 14 default cir The default value of cir(integer). 15 lower limit of cir The lower limit value of cir(integer). 16 upper limit of cir The upper limit value of cir(integer). 17 cir granularity The value of cir granularity(integer). 18 default pir The default value of pir(integer). 19 lower limit of pir The lower limit value of cir(integer). 20 upper limit of pir The upper limit value of pir(integer). 21 pir granularity The value of pir granularity(integer). 22 default burst size The default value of burst siz
.1.3.6.1.4.1.11.2.14.11.15.7.1.1.1.2,HPN-ICF-QOS-CAPABILITY-MIB::hpnicfQoSSysCapabilityTable,,not-accessible,,current,,A table of system capability of QoS.
.1.3.6.1.4.1.11.2.14.11.15.7.1.1.1.2.1,HPN-ICF-QOS-CAPABILITY-MIB::hpnicfQoSSysCapabilityEntry,,not-accessible,hpnicfQoSSysCapModuleIndex:hpnicfQoSSysCapCharacteristicsIndex,current,,Capability of system QoS information entry.
.1.3.6.1.4.1.11.2.14.11.15.7.1.1.1.2.1.1,HPN-ICF-QOS-CAPABILITY-MIB::hpnicfQoSSysCapModuleIndex,Integer32,not-accessible,,current,,The module index of QoS. QoS module: Index Characteristic 1 car module 2 gts module 3 lr module 4 hardware queue module 5 software queue module 6 wred module 7 priority mapping table module 8 port priority module 9 redirect&mirror module 10 mqc module 11 queue statistic module 
.1.3.6.1.4.1.11.2.14.11.15.7.1.1.1.2.1.2,HPN-ICF-QOS-CAPABILITY-MIB::hpnicfQoSSysCapCharacteristicsIndex,Integer32,not-accessible,,current,,The system capability characteristics index of modules of QoS.
.1.3.6.1.4.1.11.2.14.11.15.7.1.1.1.2.1.3,HPN-ICF-QOS-CAPABILITY-MIB::hpnicfQoSSysCapCharacteristicsValue,Unsigned32,read-only,,current,,The system capability characteristics value of modules of QoS. car module: Index Characteristic Value 1 car function 1, if supported. 2 global car If one of the last 3 bits of this object is set to 1, it indicates that global CAR is supported. bit 0 stands for aggregative CAR, bit 1 stands for hierarchy CAR, bit 2 stands for common global CAR. 3 mqc car 1, if supported. 4 mqc global car bit 0 stands for application of aggregative CAR by MQC, bit 1 stands for application of hierarchy CAR by MQC. 5 if car If one of the last 2 bits of this object is set to 1, it indicates that interface CAR is supported. bit 0 stands for normal CAR on interface, bit 1 stands for application of aggregative CAR on interface. 6 mqc car token If one of the last 3 bits of this object is set to 1, it indicates that 3 token parameters are all supported. bit 0 stands for burst size, bit 1 stands for excess burst size, bit 2 stands for peak information rate. 7 aggregative car token If one of the last 3 bits of this object is set to 1, it indicates that 3 token parameters are all supported. bit 0 stands for burst size, bit 1 stands for excess burst size, bit 2 stands for peak information rate. 8 hierarchy car token If one of the last 3 bits of this object is set to 1, it indicates that 3 token parameters are all supported. bit 0 stands for burst size, bit 1 stands for excess burst size, bit 2 stands for peak information rate. 9 if car token If one of the last 3 bits of this object is set to 1, it indicates that 3 token parameters are all supported. bit 0 stands for burst size, bit 1 stands for excess burst size, bit 2 stands for peak information rate. 10 mqc car green action If one of the last 10 bits of this object is set to 1, it indicates that green action is supported. bit 0 stands for continuing, bit 1 stands for dropping, bit 2 stands for transmitting, bit 3 stands for remarking IP precedence, 
.1.3.6.1.4.1.11.2.14.11.15.7.1.1.1.3,HPN-ICF-QOS-CAPABILITY-MIB::hpnicfQoSIfCapabilityTable,,not-accessible,,current,,A table of interface capability of QoS.
.1.3.6.1.4.1.11.2.14.11.15.7.1.1.1.3.1,HPN-ICF-QOS-CAPABILITY-MIB::hpnicfQoSIfCapabilityEntry,,not-accessible,hpnicfQoSIfCapIfIndex:hpnicfQoSIfCapModuleIndex:hpnicfQoSIfCapCharacteristicsIndex,current,,Capability of interface QoS information entry.
.1.3.6.1.4.1.11.2.14.11.15.7.1.1.1.3.1.1,HPN-ICF-QOS-CAPABILITY-MIB::hpnicfQoSIfCapIfIndex,Integer32,not-accessible,,current,,The interface index of interface capability of QoS.
.1.3.6.1.4.1.11.2.14.11.15.7.1.1.1.3.1.2,HPN-ICF-QOS-CAPABILITY-MIB::hpnicfQoSIfCapModuleIndex,Integer32,not-accessible,,current,,The module index of interface capability of QoS. QoS module: Index Characteristic 1 car module 2 gts module 3 lr module 4 hardware queue module 5 software queue module 6 wred module 7 priority mapping table module 8 port priority module 9 redirect&mirror module 10 mqc module 11 queue statistic module 
.1.3.6.1.4.1.11.2.14.11.15.7.1.1.1.3.1.3,HPN-ICF-QOS-CAPABILITY-MIB::hpnicfQoSIfCapCharacteristicsIndex,Integer32,not-accessible,,current,,The interface capability characteristics index of modules of QoS.
.1.3.6.1.4.1.11.2.14.11.15.7.1.1.1.3.1.4,HPN-ICF-QOS-CAPABILITY-MIB::hpnicfQoSIfCapCharacteristicsValue,Unsigned32,read-only,,current,,The interface capability characteristics value of modules of QoS. car module: Index Characteristic Value 1 car function 1, if supported. 2 interface min cir The min value of interface committed information rate(integer). 3 interface max cir The max value of interface committed information rate(integer). 4 interface cir granularity The value of interface committed information rate granularity(integer). 5 interface min cbs The min value of interface burst size(integer). 6 interface max cbs The max value of interface burst size(integer). 7 interface cbs granularity The value of interface burst size granularity(integer). 8 interface min ebs The min value of interface exess burst size(integer). 9 interface max ebs The max value of interface exess burst size(integer). 10 interface ebs granularity The value of interface exess burst size granularity(integer). 11 interface min pir The min value of interface peak information rate(integer). 12 interface max pir The max value of interface peak information rate(integer). 13 interface pir granularity The value of interface peak information rate granularity(integer). gts module: Index Characteristic Value 1 gts function 1, if supported. 2 interface min cir The min value of interface committed information rate(integer). 3 interface max cir The max value of interface committed information rate(integer). 4 interface cir granularity The value of interface committed information rate granularity(integer). 5 interface min cbs The min value of interface burst size(integer). 6 interface max cbs The max value of interface burst size(integer). 7 interface cbs granularity The value of interface burst size granularity(integer). 8 interface min ebs The min value of interface excess burst size(integer). 9 interface max ebs The max value of interface excess burst size(integer). 10 interface ebs granularity The value of int
.1.3.6.1.4.1.11.2.14.11.15.8,HPN-ICF-OID-MIB::hpnicfRhw,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.8.1,HPN-ICF-OID-MIB::hpnicfDHCPRelayMib,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.8.1.1,HPN-ICF-DHCPR-MIB::hpnicfDHCPRelayMibObject,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.8.1.1.1,HPN-ICF-DHCPR-MIB::hpnicfDHCPRIPTable,,not-accessible,,current,,A table for configuring ip addresses for DHCP relay
.1.3.6.1.4.1.11.2.14.11.15.8.1.1.1.1,HPN-ICF-DHCPR-MIB::hpnicfDHCPRIPEntry,,not-accessible,ifIndex:hpnicfDHCPRIPAddr,current,,An entry for configuring ip addresses for DHCP relay
.1.3.6.1.4.1.11.2.14.11.15.8.1.1.1.1.1,HPN-ICF-DHCPR-MIB::hpnicfDHCPRIPAddr,IpAddress,read-only,,current,,Ip address for DHCP relay
.1.3.6.1.4.1.11.2.14.11.15.8.1.1.1.1.2,HPN-ICF-DHCPR-MIB::hpnicfDHCPRIPRowStatus,INTEGER,read-create,,current,active(1):notInService(2):notReady(3):createAndGo(4):createAndWait(5):destroy(6),RowStatus. Three actions are used: active, createAndGo, destroy
.1.3.6.1.4.1.11.2.14.11.15.8.1.1.2,HPN-ICF-DHCPR-MIB::hpnicfDHCPRSeletAllocateModeTable,,not-accessible,,current,,A table for selecting allocation mode of dhcp service
.1.3.6.1.4.1.11.2.14.11.15.8.1.1.2.1,HPN-ICF-DHCPR-MIB::hpnicfDHCPRSeletAllocateModeEntry,,not-accessible,ifIndex,current,,An entry for configuring the allocation mode of DHCP service
.1.3.6.1.4.1.11.2.14.11.15.8.1.1.2.1.1,HPN-ICF-DHCPR-MIB::hpnicfDHCPRSelectAllocateMode,INTEGER,read-write,,current,global(0):interface(1):relay(2),Allocation mode of DHCP service
.1.3.6.1.4.1.11.2.14.11.15.8.1.1.3,HPN-ICF-DHCPR-MIB::hpnicfDHCPRelayCycleStatus,INTEGER,read-write,,current,on(0):off(1),Status of DHCP relay cycle mode
.1.3.6.1.4.1.11.2.14.11.15.8.1.1.4,HPN-ICF-DHCPR-MIB::hpnicfDHCPRRxBadPktNum,Integer32,read-only,,current,,The total number of the bad packets received by DHCP relay
.1.3.6.1.4.1.11.2.14.11.15.8.1.1.5,HPN-ICF-DHCPR-MIB::hpnicfDHCPRRxServerPktNum,Integer32,read-only,,current,,The total number of the packets received from DHCP servers by DHCP relay module
.1.3.6.1.4.1.11.2.14.11.15.8.1.1.6,HPN-ICF-DHCPR-MIB::hpnicfDHCPRTxServerPktNum,Integer32,read-only,,current,,The total number of the packets transmited to DHCP servers by DHCP relay module
.1.3.6.1.4.1.11.2.14.11.15.8.1.1.7,HPN-ICF-DHCPR-MIB::hpnicfDHCPRRxClientPktNum,Integer32,read-only,,current,,The total number of the packets received form DHCP clients by DHCP relay
.1.3.6.1.4.1.11.2.14.11.15.8.1.1.8,HPN-ICF-DHCPR-MIB::hpnicfDHCPRTxClientPktNum,Integer32,read-only,,current,,The total number of the brodcast packets transmited to DHCP clients by DHCP relay
.1.3.6.1.4.1.11.2.14.11.15.8.1.1.9,HPN-ICF-DHCPR-MIB::hpnicfDHCPRTxClientUniPktNum,Integer32,read-only,,current,,The total number of the unicast packets received form DHCP clients by DHCP relay
.1.3.6.1.4.1.11.2.14.11.15.8.1.1.10,HPN-ICF-DHCPR-MIB::hpnicfDHCPRTxClientBroPktNum,Integer32,read-only,,current,,The total number of the brodcast packets received form DHCP clients by DHCP relay
.1.3.6.1.4.1.11.2.14.11.15.8.1.1.11,HPN-ICF-DHCPR-MIB::hpnicfDHCPRelayDiscoverPktNum,Integer32,read-only,,current,,The total number of the DHCP Discover packets handled by DHCP relay
.1.3.6.1.4.1.11.2.14.11.15.8.1.1.12,HPN-ICF-DHCPR-MIB::hpnicfDHCPRelayRequestPktNum,Integer32,read-only,,current,,The total number of the DHCP Request packets handled by DHCP relay
.1.3.6.1.4.1.11.2.14.11.15.8.1.1.13,HPN-ICF-DHCPR-MIB::hpnicfDHCPRelayDeclinePktNum,Integer32,read-only,,current,,The total number of the DHCP Decline packets handled by DHCP relay
.1.3.6.1.4.1.11.2.14.11.15.8.1.1.14,HPN-ICF-DHCPR-MIB::hpnicfDHCPRelayReleasePktNum,Integer32,read-only,,current,,The total number of the DHCP Release packets handled by DHCP relay
.1.3.6.1.4.1.11.2.14.11.15.8.1.1.15,HPN-ICF-DHCPR-MIB::hpnicfDHCPRelayInformPktNum,Integer32,read-only,,current,,The total number of the DHCP Inform packets handled by DHCP relay
.1.3.6.1.4.1.11.2.14.11.15.8.1.1.16,HPN-ICF-DHCPR-MIB::hpnicfDHCPRelayOfferPktNum,Integer32,read-only,,current,,The total number of the DHCP Offer packets handled by DHCP server
.1.3.6.1.4.1.11.2.14.11.15.8.1.1.17,HPN-ICF-DHCPR-MIB::hpnicfDHCPRelayAckPktNum,Integer32,read-only,,current,,The total number of the DHCP Ack packets handled by DHCP relay
.1.3.6.1.4.1.11.2.14.11.15.8.1.1.18,HPN-ICF-DHCPR-MIB::hpnicfDHCPRelayNakPktNum,Integer32,read-only,,current,,The total number of the DHCP Nak packets handled by DHCP relay
.1.3.6.1.4.1.11.2.14.11.15.8.1.1.19,HPN-ICF-DHCPR-MIB::hpnicfDHCPRelayStatisticsReset,INTEGER,read-write,,current,invalid(0):reset(1),Reset the above statictics information of handled packets by DHCP relay
.1.3.6.1.4.1.11.2.14.11.15.8.1.2,HPN-ICF-DHCPR-MIB::hpnicfDHCPRelayMIBConformance,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.8.1.2.1,HPN-ICF-DHCPR-MIB::hpnicfDHCPRelayMIBCompliances,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.8.1.2.2,HPN-ICF-DHCPR-MIB::hpnicfDHCPRelayMIBGroups,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.8.1.2.2.1,HPN-ICF-DHCPR-MIB::hpnicfDHCPRelayMIBGroup,,,,,,The basic collection of objects providing management of DHCP realy.
.1.3.6.1.4.1.11.2.14.11.15.8.2,HPN-ICF-OID-MIB::hpnicfDHCPServerMib,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.8.2.1,HPN-ICF-DHCPS-MIB::hpnicfDHCPServerMibObject,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.8.2.1.1,HPN-ICF-DHCPS-MIB::hpnicfDHCPSGlobalPoolTable,,not-accessible,,current,,A table for creating DHCP server global pools.
.1.3.6.1.4.1.11.2.14.11.15.8.2.1.1.1,HPN-ICF-DHCPS-MIB::hpnicfDHCPSGlobalPoolEntry,,not-accessible,hpnicfDHCPSGlobalPoolName,current,,An entry containing objects for creating or deleting a global pool for the DHCP server.
.1.3.6.1.4.1.11.2.14.11.15.8.2.1.1.1.1,HPN-ICF-DHCPS-MIB::hpnicfDHCPSGlobalPoolName,OCTET,read-only,,current,,DHCP server global pool name.
.1.3.6.1.4.1.11.2.14.11.15.8.2.1.1.1.2,HPN-ICF-DHCPS-MIB::hpnicfDHCPSGlobalPoolRowStatus,INTEGER,read-create,,current,active(1):notInService(2):notReady(3):createAndGo(4):createAndWait(5):destroy(6),RowStatus. Three actions are used: active, createAndGo, destroy.
.1.3.6.1.4.1.11.2.14.11.15.8.2.1.2,HPN-ICF-DHCPS-MIB::hpnicfDHCPSGlobalPoolConfigTable,,not-accessible,,current,,A table containing the configurations of dhcp server global pools.
.1.3.6.1.4.1.11.2.14.11.15.8.2.1.2.1,HPN-ICF-DHCPS-MIB::hpnicfDHCPSGlobalPoolConfigEntry,,not-accessible,hpnicfDHCPSGlobalPoolName,current,,An entry containing the objects for configuring the network ip or host ip etc. to global pools for DHCP server.
.1.3.6.1.4.1.11.2.14.11.15.8.2.1.2.1.1,HPN-ICF-DHCPS-MIB::hpnicfDHCPSGlobalPoolType,INTEGER,read-write,,current,null(0):host(1):network(2),Type of a DHCP global pool. Any operations of this object will be bound with the operations of hpnicfDHCPSGlobalPoolNetwork, hpnicfDHCPSGlobalPoolHostIPAddr, or hpnicfDHCPSGlobalPoolHostHAddr. That means any operation of this object alone will be regarded as invalid operation.
.1.3.6.1.4.1.11.2.14.11.15.8.2.1.2.1.2,HPN-ICF-DHCPS-MIB::hpnicfDHCPSGlobalPoolNetwork,IpAddress,read-write,,current,,Network ip of a DHCP global pool. To delete a configured network ip, please set hpnicfDHCPSGlobalPoolConfigUndoFlag to 1.
.1.3.6.1.4.1.11.2.14.11.15.8.2.1.2.1.3,HPN-ICF-DHCPS-MIB::hpnicfDHCPSGlobalPoolNetworkMask,IpAddress,read-write,,current,,Net mask of a DHCP global pool(network). The SET operation to this object ought to be with the SET of hpnicfDHCPSGlobalPoolNetwork together, and any SET operation alone to this object will be regarded as an invalid operation. When a network ip of a DHCP global pool was deleted, the net mask would also be deleted automatically, and no further operation needed.
.1.3.6.1.4.1.11.2.14.11.15.8.2.1.2.1.4,HPN-ICF-DHCPS-MIB::hpnicfDHCPSGlobalPoolHostIPAddr,IpAddress,read-write,,current,,Host ip of a DHCP global pool. To delete a configured network ip, please set hpnicfDHCPSGlobalPoolConfigUndoFlag to 2.
.1.3.6.1.4.1.11.2.14.11.15.8.2.1.2.1.5,HPN-ICF-DHCPS-MIB::hpnicfDHCPSGlobalPoolHostMask,IpAddress,read-write,,current,,Net mask of a DHCP global pool(host) The SET operation to this object ought to be with the SET of hpnicfDHCPSGlobalPoolHostIPAddr together, and any SET operation alone to this object will be regarded as an invalid operation. When a host ip of a DHCP global pool was deleted, the net mask would also be deleted automatically, and no further operation needed.
.1.3.6.1.4.1.11.2.14.11.15.8.2.1.2.1.6,HPN-ICF-DHCPS-MIB::hpnicfDHCPSGlobalPoolHostHAddr,OCTET,read-write,,current,,Hardware address of a DHCP global pool(host). To delete a configured hardware address, please set hpnicfDHCPSGlobalPoolConfigUndoFlag to 3.
.1.3.6.1.4.1.11.2.14.11.15.8.2.1.2.1.7,HPN-ICF-DHCPS-MIB::hpnicfDHCPSGlobalPoolConfigUndoFlag,INTEGER,read-write,,current,undonetworkip(1):undohostip(2):undohosthaddr(3),Flag of undo operation for hpnicfDHCPSGlobalPoolConfigTable.
.1.3.6.1.4.1.11.2.14.11.15.8.2.1.3,HPN-ICF-DHCPS-MIB::hpnicfDHCPSGlobalPoolParaTable,,not-accessible,,current,,A table for configuring parameters to DHCP global pools.
.1.3.6.1.4.1.11.2.14.11.15.8.2.1.3.1,HPN-ICF-DHCPS-MIB::hpnicfDHCPSGlobalPoolParaEntry,,not-accessible,hpnicfDHCPSGlobalPoolName,current,,An entry containing the objects for the configurations of parameters of DHCP global pools.
.1.3.6.1.4.1.11.2.14.11.15.8.2.1.3.1.1,HPN-ICF-DHCPS-MIB::hpnicfDHCPSGlobalPoolLeaseDay,INTEGER,read-write,,current,,Number of days of the lease.
.1.3.6.1.4.1.11.2.14.11.15.8.2.1.3.1.2,HPN-ICF-DHCPS-MIB::hpnicfDHCPSGlobalPoolLeaseHour,INTEGER,read-write,,current,,Number of hours of the lease.
.1.3.6.1.4.1.11.2.14.11.15.8.2.1.3.1.3,HPN-ICF-DHCPS-MIB::hpnicfDHCPSGlobalPoolLeaseMinute,INTEGER,read-write,,current,,Number of minutes of the lease.
.1.3.6.1.4.1.11.2.14.11.15.8.2.1.3.1.4,HPN-ICF-DHCPS-MIB::hpnicfDHCPSGlobalPoolLeaseUnlimited,INTEGER,read-write,,current,invalid(0):unlimited(1),A flag denoting if the lease of a pool is unlimited.
.1.3.6.1.4.1.11.2.14.11.15.8.2.1.3.1.5,HPN-ICF-DHCPS-MIB::hpnicfDHCPSGlobalPoolDomainName,OCTET,read-write,,current,,Domain name for DHCP clients.
.1.3.6.1.4.1.11.2.14.11.15.8.2.1.3.1.6,HPN-ICF-DHCPS-MIB::hpnicfDHCPSGlobalPoolClientGatewayIPString,OCTET,read-write,,current,,String of gateway ip addresses for DHCP clients. Since mostly 8 ip can be configured for a pool totally, a string is defined to get or configure 8 ip ip at a time.
.1.3.6.1.4.1.11.2.14.11.15.8.2.1.3.1.7,HPN-ICF-DHCPS-MIB::hpnicfDHCPSGlobalPoolClientGatewayIPUndo,IpAddress,read-write,,current,,A gateway ip address to delete. This object is only for deleting a given ip of gateway router.
.1.3.6.1.4.1.11.2.14.11.15.8.2.1.3.1.8,HPN-ICF-DHCPS-MIB::hpnicfDHCPSGlobalPoolClientDNSIPString,OCTET,read-write,,current,,String of DNS server ip addresses for DHCP clients. Since mostly 8 ip can be configured for a pool totally, a string is defined to get or configure 8 ip at a time.
.1.3.6.1.4.1.11.2.14.11.15.8.2.1.3.1.9,HPN-ICF-DHCPS-MIB::hpnicfDHCPSGlobalPoolClientDNSIPUndo,IpAddress,read-write,,current,,A DNS server ip address to delete. This object is only for deleting a given ip of DNS server.
.1.3.6.1.4.1.11.2.14.11.15.8.2.1.3.1.10,HPN-ICF-DHCPS-MIB::hpnicfDHCPSGlobalPoolClientNetbiosType,INTEGER,read-write,,current,null(0):bnode(1):pnode(2):mnode(4):hnode(8),NetBios node type for DHCP clients.
.1.3.6.1.4.1.11.2.14.11.15.8.2.1.3.1.11,HPN-ICF-DHCPS-MIB::hpnicfDHCPSGlobalPoolClientNbnsIPString,OCTET,read-write,,current,,String of NetBios server ip addresses for DHCP clients. Since mostly 8 ip can be configured for a pool totally, so a string is defined to get or configure 8 ip at a time.
.1.3.6.1.4.1.11.2.14.11.15.8.2.1.3.1.12,HPN-ICF-DHCPS-MIB::hpnicfDHCPSGlobalPoolClientNbnsIPUndo,IpAddress,read-write,,current,,A NetBios server ip address to delete. This object is only for deleting a given ip of NetBios server.
.1.3.6.1.4.1.11.2.14.11.15.8.2.1.3.1.13,HPN-ICF-DHCPS-MIB::hpnicfDHCPSGlobalPoolParaUndoFlag,INTEGER,read-write,,current,undoDomain(1):undoLease(2):undoGateway(3):undoDns(4):undoNbns(5):undoNbType(6),Flag of undo-operation for hpnicfDHCPSGlobalPoolParaTable.
.1.3.6.1.4.1.11.2.14.11.15.8.2.1.3.1.14,HPN-ICF-DHCPS-MIB::hpnicfDHCPSGlobalPoolIPInUseReset,INTEGER,read-write,,current,reset(1),Reset the auto binding ip of the given global pool for DHCP server.
.1.3.6.1.4.1.11.2.14.11.15.8.2.1.4,HPN-ICF-DHCPS-MIB::hpnicfDHCPSGlobalPoolOptionTable,,not-accessible,,current,,A table for configuring options to DHCP global pools.
.1.3.6.1.4.1.11.2.14.11.15.8.2.1.4.1,HPN-ICF-DHCPS-MIB::hpnicfDHCPSGlobalPoolOptionEntry,,not-accessible,hpnicfDHCPSGlobalPoolName:hpnicfDHCPSGlobalPoolOptionCode,current,,An entry containing the objects for configuring options to DHCP global pools.
.1.3.6.1.4.1.11.2.14.11.15.8.2.1.4.1.1,HPN-ICF-DHCPS-MIB::hpnicfDHCPSGlobalPoolOptionCode,INTEGER,read-only,,current,,Option code.
.1.3.6.1.4.1.11.2.14.11.15.8.2.1.4.1.2,HPN-ICF-DHCPS-MIB::hpnicfDHCPSGlobalPoolOptionType,INTEGER,read-create,,current,ascii(1):hex(2):ip(3),Option type.
.1.3.6.1.4.1.11.2.14.11.15.8.2.1.4.1.3,HPN-ICF-DHCPS-MIB::hpnicfDHCPSGlobalPoolOptionAscii,OCTET,read-create,,current,,Ascii string of an option.
.1.3.6.1.4.1.11.2.14.11.15.8.2.1.4.1.4,HPN-ICF-DHCPS-MIB::hpnicfDHCPSGlobalPoolOptionHexString,OCTET,read-create,,current,,Hex string of an option. 1st to 16th hex strings, which are 2 bytes, 4 bytes, 6 bytes or 8 bytes, can be configured at most simultaneously. That means the format of each string must be '12', '1234', '123456' or '12345678'.
.1.3.6.1.4.1.11.2.14.11.15.8.2.1.4.1.5,HPN-ICF-DHCPS-MIB::hpnicfDHCPSGlobalPoolOptionIPString,OCTET,read-create,,current,,Ip string of an option. 1 to 8 ip addresses can be configured at most simultaneously.
.1.3.6.1.4.1.11.2.14.11.15.8.2.1.4.1.6,HPN-ICF-DHCPS-MIB::hpnicfDHCPSGlobalPoolOptionRowStatus,INTEGER,read-create,,current,active(1):notInService(2):notReady(3):createAndGo(4):createAndWait(5):destroy(6),RowStatus. Three actions are used: active, createAndGo, destroy.
.1.3.6.1.4.1.11.2.14.11.15.8.2.1.5,HPN-ICF-DHCPS-MIB::hpnicfDHCPSGlobalTreeTable,,not-accessible,,current,,A table containing the information of the tree of DHCP global pools.
.1.3.6.1.4.1.11.2.14.11.15.8.2.1.5.1,HPN-ICF-DHCPS-MIB::hpnicfDHCPSGlobalTreeEntry,,not-accessible,hpnicfDHCPSGlobalPoolName,current,,An entry of objects containing the information for displaying the tree of DHCP global pools.
.1.3.6.1.4.1.11.2.14.11.15.8.2.1.5.1.1,HPN-ICF-DHCPS-MIB::hpnicfDHCPSGlobalTreeParentNodeName,OCTET,read-only,,current,,Pool name of the parent node.
.1.3.6.1.4.1.11.2.14.11.15.8.2.1.5.1.2,HPN-ICF-DHCPS-MIB::hpnicfDHCPSGlobalTreeChildNodeName,OCTET,read-only,,current,,Pool name of the child node.
.1.3.6.1.4.1.11.2.14.11.15.8.2.1.5.1.3,HPN-ICF-DHCPS-MIB::hpnicfDHCPSGlobalTreePreSiblingNodeName,OCTET,read-only,,current,,Pool name of the presibling node.
.1.3.6.1.4.1.11.2.14.11.15.8.2.1.5.1.4,HPN-ICF-DHCPS-MIB::hpnicfDHCPSGlobalTreeSiblingNodeName,OCTET,read-only,,current,,Pool name of the sibling node.
.1.3.6.1.4.1.11.2.14.11.15.8.2.1.6,HPN-ICF-DHCPS-MIB::hpnicfDHCPSInterfacePoolParaTable,,not-accessible,,current,,A table for configuring parameters to DHCP interface pools.
.1.3.6.1.4.1.11.2.14.11.15.8.2.1.6.1,HPN-ICF-DHCPS-MIB::hpnicfDHCPSInterfacePoolParaEntry,,not-accessible,ifIndex,current,,An entry of objects for configuring parameters to DHCP interface pools. The index of this entry is the ifIndex of ethernet.
.1.3.6.1.4.1.11.2.14.11.15.8.2.1.6.1.1,HPN-ICF-DHCPS-MIB::hpnicfDHCPSInterfacePoolLeaseDay,INTEGER,read-write,,current,,Number of days of the lease.
.1.3.6.1.4.1.11.2.14.11.15.8.2.1.6.1.2,HPN-ICF-DHCPS-MIB::hpnicfDHCPSInterfacePoolLeaseHour,INTEGER,read-write,,current,,Number of hours of the lease.
.1.3.6.1.4.1.11.2.14.11.15.8.2.1.6.1.3,HPN-ICF-DHCPS-MIB::hpnicfDHCPSInterfacePoolLeaseMinute,INTEGER,read-write,,current,,Number of minutes of the lease.
.1.3.6.1.4.1.11.2.14.11.15.8.2.1.6.1.4,HPN-ICF-DHCPS-MIB::hpnicfDHCPSInterfacePoolLeaseUnlimited,INTEGER,read-write,,current,invalid(0):unlimited(1),A flag denoting if the lease of a pool is unlimited.
.1.3.6.1.4.1.11.2.14.11.15.8.2.1.6.1.5,HPN-ICF-DHCPS-MIB::hpnicfDHCPSInterfacePoolDomainName,OCTET,read-write,,current,,Domain name for DHCP clients.
.1.3.6.1.4.1.11.2.14.11.15.8.2.1.6.1.6,HPN-ICF-DHCPS-MIB::hpnicfDHCPSInterfacePoolClientDNSIPString,OCTET,read-write,,current,,String of DNS server ip addresses for DHCP clients. Since mostly 8 ip can be configured for a pool totally, a string is defined to get or configure 8 ip at a time.
.1.3.6.1.4.1.11.2.14.11.15.8.2.1.6.1.7,HPN-ICF-DHCPS-MIB::hpnicfDHCPSInterfacePoolClientDNSIPUndo,IpAddress,read-write,,current,,A DNS server ip address to delete. This object is only for deleting a given ip of DNS server.
.1.3.6.1.4.1.11.2.14.11.15.8.2.1.6.1.8,HPN-ICF-DHCPS-MIB::hpnicfDHCPSInterfacePoolClientNetbiosType,INTEGER,read-write,,current,null(0):bnode(1):pnode(2):mnode(4):hnode(8),NetBios node type for DHCP clients.
.1.3.6.1.4.1.11.2.14.11.15.8.2.1.6.1.9,HPN-ICF-DHCPS-MIB::hpnicfDHCPSInterfacePoolClientNbnsIPString,OCTET,read-write,,current,,String of NetBios server ip addresses for DHCP clients. Since mostly 8 ip can be configured for a pool totally, so a string is defined to get or configure 8 ip at a time.
.1.3.6.1.4.1.11.2.14.11.15.8.2.1.6.1.10,HPN-ICF-DHCPS-MIB::hpnicfDHCPSInterfacePoolClientNbnsIPUndo,IpAddress,read-write,,current,,A NetBios server ip address to delete. This object is only for deleting a given ip of NetBios server.
.1.3.6.1.4.1.11.2.14.11.15.8.2.1.6.1.11,HPN-ICF-DHCPS-MIB::hpnicfDHCPSInterfacePoolParaUndoFlag,INTEGER,read-write,,current,undoDomain(1):undoLease(2):undoDns(4):undoNbns(5):undoNbType(6),Flag of undo-operation for hpnicfDHCPSInterfacePoolParaTable.
.1.3.6.1.4.1.11.2.14.11.15.8.2.1.6.1.12,HPN-ICF-DHCPS-MIB::hpnicfDHCPSInterfacePoolIPInUseReset,INTEGER,read-write,,current,reset(1),Reset the auto binding ip of the given interface pool for DHCP server.
.1.3.6.1.4.1.11.2.14.11.15.8.2.1.7,HPN-ICF-DHCPS-MIB::hpnicfDHCPSInterfacePoolOptionTable,,not-accessible,,current,,A table for configuring options to DHCP interface pools.
.1.3.6.1.4.1.11.2.14.11.15.8.2.1.7.1,HPN-ICF-DHCPS-MIB::hpnicfDHCPSInterfacePoolOptionEntry,,not-accessible,ifIndex:hpnicfDHCPSInterfacePoolOptionCode,current,,An entry of objects for configuring options to DHCP interface pools. The index of this entry is the ifIndex of ethernet.
.1.3.6.1.4.1.11.2.14.11.15.8.2.1.7.1.1,HPN-ICF-DHCPS-MIB::hpnicfDHCPSInterfacePoolOptionCode,INTEGER,read-only,,current,,Option Code.
.1.3.6.1.4.1.11.2.14.11.15.8.2.1.7.1.2,HPN-ICF-DHCPS-MIB::hpnicfDHCPSInterfacePoolOptionType,INTEGER,read-create,,current,ascii(1):hex(2):ip(3),Option type.
.1.3.6.1.4.1.11.2.14.11.15.8.2.1.7.1.3,HPN-ICF-DHCPS-MIB::hpnicfDHCPSInterfacePoolOptionAscii,OCTET,read-create,,current,,Ascii string of an option.
.1.3.6.1.4.1.11.2.14.11.15.8.2.1.7.1.4,HPN-ICF-DHCPS-MIB::hpnicfDHCPSInterfacePoolOptionHexString,OCTET,read-create,,current,,Hex string of an option. 1st to 16th hex strings, which are 2 bytes, 4 bytes, 6 bytes or 8 bytes, can be configured at most simultaneously. That means the format of each string must be '12', '1234', '123456' or '12345678'.
.1.3.6.1.4.1.11.2.14.11.15.8.2.1.7.1.5,HPN-ICF-DHCPS-MIB::hpnicfDHCPSInterfacePoolOptionIPString,OCTET,read-create,,current,,Ip string of an option. 1 to 8 ip addresses can be configured at most simultaneously.
.1.3.6.1.4.1.11.2.14.11.15.8.2.1.7.1.6,HPN-ICF-DHCPS-MIB::hpnicfDHCPSInterfacePoolOptionRowStatus,INTEGER,read-create,,current,active(1):notInService(2):notReady(3):createAndGo(4):createAndWait(5):destroy(6),RowStatus. Three actions are used: active, createAndGo, destroy.
.1.3.6.1.4.1.11.2.14.11.15.8.2.1.8,HPN-ICF-DHCPS-MIB::hpnicfDHCPSInterfacePoolStaticBindTable,,not-accessible,,current,,A table for configuring static binding to DHCP interface pools.
.1.3.6.1.4.1.11.2.14.11.15.8.2.1.8.1,HPN-ICF-DHCPS-MIB::hpnicfDHCPSInterfacePoolStaticBindEntry,,not-accessible,ifIndex:hpnicfDHCPSInterfacePoolStaticBindIP,current,,An entry of objects for configuring static binding to DHCP interface pools. The index of this entry is the ifIndex of ethernet.
.1.3.6.1.4.1.11.2.14.11.15.8.2.1.8.1.1,HPN-ICF-DHCPS-MIB::hpnicfDHCPSInterfacePoolStaticBindIP,IpAddress,read-only,,current,,Ip address in static binding for DHCP interface pools.
.1.3.6.1.4.1.11.2.14.11.15.8.2.1.8.1.2,HPN-ICF-DHCPS-MIB::hpnicfDHCPSInterfacePoolStaticBindMac,OCTET,read-create,,current,,Hardware address in static binding for DHCP interface pools.
.1.3.6.1.4.1.11.2.14.11.15.8.2.1.8.1.3,HPN-ICF-DHCPS-MIB::hpnicfDHCPSInterfacePoolStaticBindRowStatus,INTEGER,read-create,,current,active(1):notInService(2):notReady(3):createAndGo(4):createAndWait(5):destroy(6),RowStatus. Three actions are used: active, createAndGo, destroy.
.1.3.6.1.4.1.11.2.14.11.15.8.2.1.9,HPN-ICF-DHCPS-MIB::hpnicfDHCPSIPInUseTable,,not-accessible,,deprecated,,A table for displaying the information of ip in use for DHCP server pools.
.1.3.6.1.4.1.11.2.14.11.15.8.2.1.9.1,HPN-ICF-DHCPS-MIB::hpnicfDHCPSIPInUseEntry,,not-accessible,hpnicfDHCPSIPInUseHAddr,deprecated,,An entry of objects for displaying information of ip in use for DHCP server pools.
.1.3.6.1.4.1.11.2.14.11.15.8.2.1.9.1.1,HPN-ICF-DHCPS-MIB::hpnicfDHCPSIPInUseHAddr,OCTET,read-only,,deprecated,,Hardware address.
.1.3.6.1.4.1.11.2.14.11.15.8.2.1.9.1.2,HPN-ICF-DHCPS-MIB::hpnicfDHCPSIPInUseIP,IpAddress,read-only,,deprecated,,Ip address in use.
.1.3.6.1.4.1.11.2.14.11.15.8.2.1.9.1.3,HPN-ICF-DHCPS-MIB::hpnicfDHCPSIPInUseEndLease,OCTET,read-only,,deprecated,,End time of lease. The structure of the OCTET STRING is month/day/year hour:munite:second -- MM/DD/YYYY hh:mm:ss. 
.1.3.6.1.4.1.11.2.14.11.15.8.2.1.9.1.4,HPN-ICF-DHCPS-MIB::hpnicfDHCPSIPInUseType,INTEGER,read-only,,deprecated,manual(1):auto(2):release(3),Type of binding.
.1.3.6.1.4.1.11.2.14.11.15.8.2.1.9.1.5,HPN-ICF-DHCPS-MIB::hpnicfDHCPSIPInUsePoolName,OCTET,read-only,,deprecated,,Name of the DHCP server pool the ip belongs to.
.1.3.6.1.4.1.11.2.14.11.15.8.2.1.9.1.6,HPN-ICF-DHCPS-MIB::hpnicfDHCPSIPInUseInterface,INTEGER,read-only,,deprecated,,Interface index information.
.1.3.6.1.4.1.11.2.14.11.15.8.2.1.9.1.7,HPN-ICF-DHCPS-MIB::hpnicfDHCPSIPInUseVlan,INTEGER,read-only,,deprecated,,Vlan information.
.1.3.6.1.4.1.11.2.14.11.15.8.2.1.9.1.8,HPN-ICF-DHCPS-MIB::hpnicfDHCPSIPInUseAtmpvc,INTEGER,read-only,,deprecated,,Pvc information.
.1.3.6.1.4.1.11.2.14.11.15.8.2.1.10,HPN-ICF-DHCPS-MIB::hpnicfDHCPSForbiddenIPTable,,not-accessible,,current,,A table for configuring forbidden ip to DHCP server.
.1.3.6.1.4.1.11.2.14.11.15.8.2.1.10.1,HPN-ICF-DHCPS-MIB::hpnicfDHCPSForbiddenIPEntry,,not-accessible,hpnicfDHCPSForbiddenIPStart:hpnicfDHCPSForbiddenIPEnd,current,,An entry for configuring forbidden ip to DHCP server.
.1.3.6.1.4.1.11.2.14.11.15.8.2.1.10.1.1,HPN-ICF-DHCPS-MIB::hpnicfDHCPSForbiddenIPStart,IpAddress,read-only,,current,,Start ip of forbidden ip.
.1.3.6.1.4.1.11.2.14.11.15.8.2.1.10.1.2,HPN-ICF-DHCPS-MIB::hpnicfDHCPSForbiddenIPEnd,IpAddress,read-only,,current,,End ip of forbidden ip.
.1.3.6.1.4.1.11.2.14.11.15.8.2.1.10.1.3,HPN-ICF-DHCPS-MIB::hpnicfDHCPSForbiddenIPRowStatus,INTEGER,read-create,,current,active(1):notInService(2):notReady(3):createAndGo(4):createAndWait(5):destroy(6),RowStatus. Three actions are used: active, createAndGo, destroy.
.1.3.6.1.4.1.11.2.14.11.15.8.2.1.11,HPN-ICF-DHCPS-MIB::hpnicfDHCPSConflictIPTable,,not-accessible,,current,,A table for displaying the information of conflict ip for DHCP server.
.1.3.6.1.4.1.11.2.14.11.15.8.2.1.11.1,HPN-ICF-DHCPS-MIB::hpnicfDHCPSConflictIPEntry,,not-accessible,hpnicfDHCPSConflictIP,current,,An entry for displaying the information of conflict ip for DHCP server.
.1.3.6.1.4.1.11.2.14.11.15.8.2.1.11.1.1,HPN-ICF-DHCPS-MIB::hpnicfDHCPSConflictIP,IpAddress,read-only,,current,,Conflict ip.
.1.3.6.1.4.1.11.2.14.11.15.8.2.1.11.1.2,HPN-ICF-DHCPS-MIB::hpnicfDHCPSConflictIPType,INTEGER,read-only,,current,ping(1):arp(2),Type of the detection of conflict ip.
.1.3.6.1.4.1.11.2.14.11.15.8.2.1.11.1.3,HPN-ICF-DHCPS-MIB::hpnicfDHCPSConflictIPDetectTime,OCTET,read-only,,current,,Time when the conflict is detected. The structure of the OCTET STRING is month/day/year hour:munite:second -- MM/DD/YYYY hh:mm:ss.
.1.3.6.1.4.1.11.2.14.11.15.8.2.1.12,HPN-ICF-DHCPS-MIB::hpnicfDHCPSServiceStatus,INTEGER,read-write,,current,enabled(1):disabled(0),The status of DHCP service.
.1.3.6.1.4.1.11.2.14.11.15.8.2.1.13,HPN-ICF-DHCPS-MIB::hpnicfDHCPSDetectingServerStatus,INTEGER,read-write,,current,enabled(1):disabled(0),The status of DHCP servers detecting function.
.1.3.6.1.4.1.11.2.14.11.15.8.2.1.14,HPN-ICF-DHCPS-MIB::hpnicfDHCPSPingNum,INTEGER,read-write,,current,,The number of ping packets sent out.
.1.3.6.1.4.1.11.2.14.11.15.8.2.1.15,HPN-ICF-DHCPS-MIB::hpnicfDHCPSPingTimeout,INTEGER,read-write,,current,,The delay for the reply of a ping packet. Unit: millisecond.
.1.3.6.1.4.1.11.2.14.11.15.8.2.1.16,HPN-ICF-DHCPS-MIB::hpnicfDHCPSWriteDataStatus,INTEGER,read-write,,current,enabled(1):disabled(0),The status of the function writing data to the harddisk.
.1.3.6.1.4.1.11.2.14.11.15.8.2.1.17,HPN-ICF-DHCPS-MIB::hpnicfDHCPSWriteDataDirection,OCTET,read-only,,current,,The direction of writing data to a harddisk.
.1.3.6.1.4.1.11.2.14.11.15.8.2.1.18,HPN-ICF-DHCPS-MIB::hpnicfDHCPSWriteDataDelay,INTEGER,read-write,,current,,The allowable delay of writing data to the harddisk. Unit: second.
.1.3.6.1.4.1.11.2.14.11.15.8.2.1.19,HPN-ICF-DHCPS-MIB::hpnicfDHCPSWriteDataRecover,INTEGER,read-write,,current,enabled(1):disabled(0),The flag used to recover DHCP data with the data on the harddisk.
.1.3.6.1.4.1.11.2.14.11.15.8.2.1.20,HPN-ICF-DHCPS-MIB::hpnicfDHCPSIPInUseResetIP,IpAddress,read-write,,current,,An ip in use that will be cleared. 0 returned for SET operation.
.1.3.6.1.4.1.11.2.14.11.15.8.2.1.21,HPN-ICF-DHCPS-MIB::hpnicfDHCPSConflictIPResetIP,IpAddress,read-write,,current,,A conflict ip that will be cleared. 0 returned for SET operation.
.1.3.6.1.4.1.11.2.14.11.15.8.2.1.22,HPN-ICF-DHCPS-MIB::hpnicfDHCPSIPResetFlag,INTEGER,read-write,,current,invalid(0):ipInUse(1):conflictIp(2),A flag that descript the reset operation.
.1.3.6.1.4.1.11.2.14.11.15.8.2.1.23,HPN-ICF-DHCPS-MIB::hpnicfDHCPSGlobalPoolNumber,Integer32,read-only,,current,,The total number of DHCP server global-pools.
.1.3.6.1.4.1.11.2.14.11.15.8.2.1.24,HPN-ICF-DHCPS-MIB::hpnicfDHCPSGlobalPoolAutoBindingNum,Integer32,read-only,,current,,The total number of auto binding ip in DHCP server global-pools.
.1.3.6.1.4.1.11.2.14.11.15.8.2.1.25,HPN-ICF-DHCPS-MIB::hpnicfDHCPSGlobalPoolManualBindingNum,Integer32,read-only,,current,,The total number of manual binding ip in DHCP server global-pools.
.1.3.6.1.4.1.11.2.14.11.15.8.2.1.26,HPN-ICF-DHCPS-MIB::hpnicfDHCPSGlobalPoolExpiredBindingNum,Integer32,read-only,,current,,The total number of expired binding ip in DHCP server global-pools.
.1.3.6.1.4.1.11.2.14.11.15.8.2.1.27,HPN-ICF-DHCPS-MIB::hpnicfDHCPSInterfacePoolNumber,Integer32,read-only,,current,,The total number of DHCP server interface-pools.
.1.3.6.1.4.1.11.2.14.11.15.8.2.1.28,HPN-ICF-DHCPS-MIB::hpnicfDHCPSInterfacePoolAutoBindingNum,Integer32,read-only,,current,,The total number of auto binding ip in DHCP server interface-pools.
.1.3.6.1.4.1.11.2.14.11.15.8.2.1.29,HPN-ICF-DHCPS-MIB::hpnicfDHCPSInterfacePoolManualBindingNum,Integer32,read-only,,current,,The total number of manual binding ip in DHCP server interface-pools.
.1.3.6.1.4.1.11.2.14.11.15.8.2.1.30,HPN-ICF-DHCPS-MIB::hpnicfDHCPSInterfacePoolExpiredBindingNum,Integer32,read-only,,current,,The total number of expired binding ip in DHCP server interface-pools.
.1.3.6.1.4.1.11.2.14.11.15.8.2.1.31,HPN-ICF-DHCPS-MIB::hpnicfDHCPSBadPktNum,Integer32,read-only,,current,,The total number of the bad packets received.
.1.3.6.1.4.1.11.2.14.11.15.8.2.1.32,HPN-ICF-DHCPS-MIB::hpnicfDHCPSBootRequestPktNum,Integer32,read-only,,current,,The total number of the packets received by DHCP Server from DHCP clients.
.1.3.6.1.4.1.11.2.14.11.15.8.2.1.33,HPN-ICF-DHCPS-MIB::hpnicfDHCPSDiscoverPktNum,Integer32,read-only,,current,,The total number of the DHCP Discover packets received from the DHCP clients.
.1.3.6.1.4.1.11.2.14.11.15.8.2.1.34,HPN-ICF-DHCPS-MIB::hpnicfDHCPSRequestPktNum,Integer32,read-only,,current,,The total number of the DHCP Request packets received from the DHCP clients.
.1.3.6.1.4.1.11.2.14.11.15.8.2.1.35,HPN-ICF-DHCPS-MIB::hpnicfDHCPSDeclinePktNum,Integer32,read-only,,current,,The total number of the DHCP Decline packets received from the DHCP clients.
.1.3.6.1.4.1.11.2.14.11.15.8.2.1.36,HPN-ICF-DHCPS-MIB::hpnicfDHCPSReleasePktNum,Integer32,read-only,,current,,The total number of the DHCP Release packets received from the DHCP clients.
.1.3.6.1.4.1.11.2.14.11.15.8.2.1.37,HPN-ICF-DHCPS-MIB::hpnicfDHCPSInformPktNum,Integer32,read-only,,current,,The total number of the DHCP Inform packets received from the DHCP clients.
.1.3.6.1.4.1.11.2.14.11.15.8.2.1.38,HPN-ICF-DHCPS-MIB::hpnicfDHCPSBootReplyPktNum,Integer32,read-only,,current,,The total number of the packets sent by DHCP server to DHCP clients.
.1.3.6.1.4.1.11.2.14.11.15.8.2.1.39,HPN-ICF-DHCPS-MIB::hpnicfDHCPSOfferPktNum,Integer32,read-only,,current,,The total number of the DHCP Offer packets sent by the DHCP server.
.1.3.6.1.4.1.11.2.14.11.15.8.2.1.40,HPN-ICF-DHCPS-MIB::hpnicfDHCPSAckPktNum,Integer32,read-only,,current,,The total number of the DHCP Ack packets sent by the DHCP server.
.1.3.6.1.4.1.11.2.14.11.15.8.2.1.41,HPN-ICF-DHCPS-MIB::hpnicfDHCPSNakPktNum,Integer32,read-only,,current,,The total number of the DHCP Nak packets sent by the DHCP server.
.1.3.6.1.4.1.11.2.14.11.15.8.2.1.42,HPN-ICF-DHCPS-MIB::hpnicfDHCPSStatisticsReset,INTEGER,read-write,,current,reset(1),Reset the above statistic information of packets received and sent by the DHCP server.
.1.3.6.1.4.1.11.2.14.11.15.8.2.1.43,HPN-ICF-DHCPS-MIB::hpnicfDHCPSIPInUseExTable,,not-accessible,,current,,A table for displaying the information of ip in use for DHCP Server pools. 
.1.3.6.1.4.1.11.2.14.11.15.8.2.1.43.1,HPN-ICF-DHCPS-MIB::hpnicfDHCPSIPInUseExEntry,,not-accessible,hpnicfDHCPSIPInUseHAddrEx:hpnicfDHCPSIPInUseVlanIdEx,current,,An entry of objects for displaying information of ip in use for DHCP server pools.
.1.3.6.1.4.1.11.2.14.11.15.8.2.1.43.1.1,HPN-ICF-DHCPS-MIB::hpnicfDHCPSIPInUseHAddrEx,OCTET,accessible-for-notify,,current,,Hardware address.
.1.3.6.1.4.1.11.2.14.11.15.8.2.1.43.1.2,HPN-ICF-DHCPS-MIB::hpnicfDHCPSIPInUseVlanIdEx,INTEGER,accessible-for-notify,,current,,User's vlanID. 60000 means that a client doesn't have vlanID or have an invalid vlanID.
.1.3.6.1.4.1.11.2.14.11.15.8.2.1.43.1.3,HPN-ICF-DHCPS-MIB::hpnicfDHCPSIPInUseIPEx,IpAddress,read-only,,current,,Ip address in use.
.1.3.6.1.4.1.11.2.14.11.15.8.2.1.43.1.4,HPN-ICF-DHCPS-MIB::hpnicfDHCPSIPInUseEndLeaseEx,OCTET,read-only,,current,,End time of lease. The structure of the OCTET STRING is month/day/year hour:munite:second -- MM/DD/YYYY hh:mm:ss.
.1.3.6.1.4.1.11.2.14.11.15.8.2.1.43.1.5,HPN-ICF-DHCPS-MIB::hpnicfDHCPSIPInUseTypeEx,INTEGER,read-only,,current,manual(1):auto(2):release(3),Type of binding.
.1.3.6.1.4.1.11.2.14.11.15.8.2.1.43.1.6,HPN-ICF-DHCPS-MIB::hpnicfDHCPSIPInUsePoolNameEx,OCTET,read-only,,current,,Name of the DHCP server pool the ip belongs to.
.1.3.6.1.4.1.11.2.14.11.15.8.2.1.43.1.7,HPN-ICF-DHCPS-MIB::hpnicfDHCPSIPInUseIfIndexEx,INTEGER,read-only,,current,,Interface index information.
.1.3.6.1.4.1.11.2.14.11.15.8.2.1.43.1.8,HPN-ICF-DHCPS-MIB::hpnicfDHCPSIPInUseServerPortVlanIdEx,INTEGER,read-only,,current,,Vlan information of port on server through which the client user accesses server.
.1.3.6.1.4.1.11.2.14.11.15.8.2.1.43.1.9,HPN-ICF-DHCPS-MIB::hpnicfDHCPSIPInUseAtmpvcEx,INTEGER,read-only,,current,,Pvc information.
.1.3.6.1.4.1.11.2.14.11.15.8.2.2,HPN-ICF-DHCPS-MIB::hpnicfDHCPServerMIBConformance,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.8.2.2.1,HPN-ICF-DHCPS-MIB::hpnicfDHCPServerMIBCompliances,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.8.2.2.2,HPN-ICF-DHCPS-MIB::hpnicfDHCPServerMIBGroups,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.8.2.2.2.1,HPN-ICF-DHCPS-MIB::hpnicfDHCPServerMIBGroup,,,,,,The basic collection of objects providing management of DHCP server.
.1.3.6.1.4.1.11.2.14.11.15.8.3,HPN-ICF-OID-MIB::hpnicfNqa,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.8.3.1,HPN-ICF-NQA-MIB::hpnicfNqaObjects,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.8.3.1.1,HPN-ICF-NQA-MIB::hpnicfNqaMIBVersion,OCTET,read-only,,current,,Version string of this MIB. The format will be: 'Version.Release.Patch: Description' An instance likes: '1.0.0: Initial NQA MIB' 
.1.3.6.1.4.1.11.2.14.11.15.8.3.1.2,HPN-ICF-NQA-MIB::hpnicfNqaCtlTable,,not-accessible,,current,,Defines the NQA Control Extend Table for providing, via SNMP, the capability of performing network analysis operations at a remote host.
.1.3.6.1.4.1.11.2.14.11.15.8.3.1.2.1,HPN-ICF-NQA-MIB::hpnicfNqaCtlEntry,,not-accessible,,current,,Defines an entry in the hpnicfNqaCtlTable. The operation of this table is same as that of pingResultsTable.
.1.3.6.1.4.1.11.2.14.11.15.8.3.1.2.1.1,HPN-ICF-NQA-MIB::hpnicfNqaCtlTargetPort,Integer32,read-create,,current,,The destination port that may be used by udpEcho, tcpConnect and jitter probes.
.1.3.6.1.4.1.11.2.14.11.15.8.3.1.2.1.2,HPN-ICF-NQA-MIB::hpnicfNqaCtlSourcePort,Integer32,read-create,,current,,The source port that may be used by all tests except for dns and dlsw. If no source port is specified, system will create a random port as source port.
.1.3.6.1.4.1.11.2.14.11.15.8.3.1.2.1.3,HPN-ICF-NQA-MIB::hpnicfNqaCtlTTL,Integer32,read-create,,current,,Specifies the value to store in the TTL Field in the IP packet used to encapsulate the NQA probe.
.1.3.6.1.4.1.11.2.14.11.15.8.3.1.2.1.4,HPN-ICF-NQA-MIB::hpnicfNqaCtlJitterAdminInterval,Integer32,read-create,,current,,Time value in milliseconds that is an interval between two continuous probes in jitter test. This object is only used by jitter test.
.1.3.6.1.4.1.11.2.14.11.15.8.3.1.2.1.5,HPN-ICF-NQA-MIB::hpnicfNqaCtlJitterAdminNumPackets,Integer32,read-create,,current,,Packet number that specifys how many packets will be sent in one jitter test. This object is only used by jitter test.
.1.3.6.1.4.1.11.2.14.11.15.8.3.1.2.1.6,HPN-ICF-NQA-MIB::hpnicfNqaCtlHttpOperationType,INTEGER,read-create,,current,get(1):post(2):raw(3),Http operation type: get, post or raw.
.1.3.6.1.4.1.11.2.14.11.15.8.3.1.2.1.7,HPN-ICF-NQA-MIB::hpnicfNqaCtlHttpOperationString,OCTET,read-create,,current,,Http operation string. For example, if the http operation type is get, the string will be url, home page and http version.
.1.3.6.1.4.1.11.2.14.11.15.8.3.1.2.1.8,HPN-ICF-NQA-MIB::hpnicfNqaCtlFtpOperationType,INTEGER,read-create,,current,get(1):put(2),Ftp operation type.
.1.3.6.1.4.1.11.2.14.11.15.8.3.1.2.1.9,HPN-ICF-NQA-MIB::hpnicfNqaCtlFtpUsername,OCTET,read-create,,current,,Ftp username.
.1.3.6.1.4.1.11.2.14.11.15.8.3.1.2.1.10,HPN-ICF-NQA-MIB::hpnicfNqaCtlFtpPassword,OCTET,read-create,,current,,Ftp password.
.1.3.6.1.4.1.11.2.14.11.15.8.3.1.2.1.11,HPN-ICF-NQA-MIB::hpnicfNqaCtlFtpOperationString,OCTET,read-create,,current,,Ftp operation string. If the ftp operation type is get, the string must be the file name which will be gotten from ftp server.
.1.3.6.1.4.1.11.2.14.11.15.8.3.1.2.1.12,HPN-ICF-NQA-MIB::hpnicfNqaCtlVPNInstance,OCTET,read-create,,current,,VPN name by which system finds route in the specified VPN to send NQA probe packets.
.1.3.6.1.4.1.11.2.14.11.15.8.3.1.2.1.13,HPN-ICF-NQA-MIB::hpnicfNqaCtlHistoryKeptTime,Integer32,read-create,,current,,To indicate how long the history records will be saved in the pingProbeHistoryTable table after the test stopped.
.1.3.6.1.4.1.11.2.14.11.15.8.3.1.2.1.14,HPN-ICF-NQA-MIB::hpnicfNqaCtlHistoryEnable,INTEGER,read-create,,current,enabled(1):disabled(2),To indicate whether the history should be recorded in the PingProbeHistoryTable or not. enabled(1) --history will be recorded disabled(2) --history will not be recorded.
.1.3.6.1.4.1.11.2.14.11.15.8.3.1.2.1.15,HPN-ICF-NQA-MIB::hpnicfNqaCtlICPIFAdvFactor,Integer32,read-create,,current,,The advantage factor depends on the type of access and how the service is to be used. This object will be used while calculating the ICPIF (Calculated Planning Impairment Factor) values. This is applicable only for the jitter probe. Suggestion values: |-----------------------------------|-------| | Service |factor | |-----------------------------------|-------| |conventional wire-line | 0 | |-----------------------------------|-------| |mobility within Building | 5 | |-----------------------------------|-------| |mobility within geographical area | 10 | |-----------------------------------|-------| |access to hard-to-reach location | 20 | |-----------------------------------|-------| 
.1.3.6.1.4.1.11.2.14.11.15.8.3.1.2.1.16,HPN-ICF-NQA-MIB::hpnicfNqaCtlCodecType,INTEGER,read-create,,current,notDefined(1):g711Alaw(2):g711Ulaw(3):g729A(4):icmpTimestamp(5),To indicate the codec type to be used with jitter probe. This is applicable only for the jitter probe.
.1.3.6.1.4.1.11.2.14.11.15.8.3.1.3,HPN-ICF-NQA-MIB::hpnicfNqaResultsTable,,not-accessible,,current,,Defines the NQA Results Extend Table for providing the capability of performing NQA operations at a remote host. The results of these operations are stored in the hpnicfNqaResultsTable. The operation of this table is same as that of pingResultsTable.
.1.3.6.1.4.1.11.2.14.11.15.8.3.1.3.1,HPN-ICF-NQA-MIB::hpnicfNqaResultsEntry,,not-accessible,pingCtlOwnerIndex:pingCtlTestName,current,,The operation of this table is same as that of pingResultsTable.
.1.3.6.1.4.1.11.2.14.11.15.8.3.1.3.1.1,HPN-ICF-NQA-MIB::hpnicfNqaResultsRttNumDisconnects,Unsigned32,read-only,,current,,The number of times that a NQA probe failed because the destination became disconnected. For connectionless protocol pingCtlTypes, this number should be zero.
.1.3.6.1.4.1.11.2.14.11.15.8.3.1.3.1.2,HPN-ICF-NQA-MIB::hpnicfNqaResultsRttTimeouts,Unsigned32,read-only,,current,,The number of times that a NQA probe failed because the probe timed out.
.1.3.6.1.4.1.11.2.14.11.15.8.3.1.3.1.3,HPN-ICF-NQA-MIB::hpnicfNqaResultsRttBusies,Unsigned32,read-only,,current,,The number of times that a NQA probe failed because all NQA tasks have been running. If a new probe fails to start, the value of this object is incremented. The next test will not start until the next Frequency.
.1.3.6.1.4.1.11.2.14.11.15.8.3.1.3.1.4,HPN-ICF-NQA-MIB::hpnicfNqaResultsRttNoConnections,Unsigned32,read-only,,current,,The number of times that a NQA probe failed because the probe destination is unavailable. For connectionless protocol pingCtlTypes, this number should be zero.
.1.3.6.1.4.1.11.2.14.11.15.8.3.1.3.1.5,HPN-ICF-NQA-MIB::hpnicfNqaResultsRttDrops,Unsigned32,read-only,,current,,The number of times that a NQA operation failed to initiated for unavailibility of necessary internal resources.
.1.3.6.1.4.1.11.2.14.11.15.8.3.1.3.1.6,HPN-ICF-NQA-MIB::hpnicfNqaResultsRttSequenceErrors,Unsigned32,read-only,,current,,The number of packets arrived out of sequence.
.1.3.6.1.4.1.11.2.14.11.15.8.3.1.3.1.7,HPN-ICF-NQA-MIB::hpnicfNqaResultsRttStatsErrors,Unsigned32,read-only,,current,,The number of some other errors.
.1.3.6.1.4.1.11.2.14.11.15.8.3.1.3.1.8,HPN-ICF-NQA-MIB::hpnicfNqaResultsMaxDelaySD,Unsigned32,read-only,,current,,The maximal delay from source device to destination device. Currently this value is only used for jitter test, and this value must be 0 in other type test. In jitter test, if destination system time is not valid, the SD delay may be set 0.
.1.3.6.1.4.1.11.2.14.11.15.8.3.1.3.1.9,HPN-ICF-NQA-MIB::hpnicfNqaResultsMaxDelayDS,Unsigned32,read-only,,current,,The maximal delay from destination device to source device. Currently this value is only used for jitter test, and this value is 0 in other type test. In jitter test, if destination system time is not valid, the DS delay may be set 0.
.1.3.6.1.4.1.11.2.14.11.15.8.3.1.3.1.10,HPN-ICF-NQA-MIB::hpnicfNqaResultsLostPacketRatio,Unsigned32,read-only,,current,,The value of this object reflects the drop rate of NQA test. For example, this value is 30 that means source device only had received 70% packets of total sent packets.
.1.3.6.1.4.1.11.2.14.11.15.8.3.1.3.1.11,HPN-ICF-NQA-MIB::hpnicfNqaResultsPacketLateArrival,Unsigned32,read-only,,current,,The value of this object indicates the number of the packets that arrived after the timeout.
.1.3.6.1.4.1.11.2.14.11.15.8.3.1.3.1.12,HPN-ICF-NQA-MIB::hpnicfNqaResultsRttSum,Unsigned32,read-only,,current,,The sum of round trip time.
.1.3.6.1.4.1.11.2.14.11.15.8.3.1.3.1.13,HPN-ICF-NQA-MIB::hpnicfNqaResultsNumOfDelaySD,Unsigned32,read-only,,current,,The number of delay from source to destination that are successfully measured.
.1.3.6.1.4.1.11.2.14.11.15.8.3.1.3.1.14,HPN-ICF-NQA-MIB::hpnicfNqaResultsMinDelaySD,Unsigned32,read-only,,current,,The minimum of all one way times from source to destination.
.1.3.6.1.4.1.11.2.14.11.15.8.3.1.3.1.15,HPN-ICF-NQA-MIB::hpnicfNqaResultsSumDelaySD,Unsigned32,read-only,,current,,The sum of one way times from source to destination.
.1.3.6.1.4.1.11.2.14.11.15.8.3.1.3.1.16,HPN-ICF-NQA-MIB::hpnicfNqaResultsSum2DelaySD,Unsigned32,read-only,,current,,The sum of squares of one way times from source to destination.
.1.3.6.1.4.1.11.2.14.11.15.8.3.1.3.1.17,HPN-ICF-NQA-MIB::hpnicfNqaResultsNumOfDelayDS,Unsigned32,read-only,,current,,The number of delay from destination to source that are successfully measured.
.1.3.6.1.4.1.11.2.14.11.15.8.3.1.3.1.18,HPN-ICF-NQA-MIB::hpnicfNqaResultsMinDelayDS,Unsigned32,read-only,,current,,The minimum of all one way times from destination to source.
.1.3.6.1.4.1.11.2.14.11.15.8.3.1.3.1.19,HPN-ICF-NQA-MIB::hpnicfNqaResultsSumDelayDS,Unsigned32,read-only,,current,,The sum of one way times from destination to source.
.1.3.6.1.4.1.11.2.14.11.15.8.3.1.3.1.20,HPN-ICF-NQA-MIB::hpnicfNqaResultsSum2DelayDS,Unsigned32,read-only,,current,,The sum of squares of one way times from destination to source.
.1.3.6.1.4.1.11.2.14.11.15.8.3.1.4,HPN-ICF-NQA-MIB::hpnicfNqaJitterStatsTable,,not-accessible,,current,,Statistics table for latest jitter activity.
.1.3.6.1.4.1.11.2.14.11.15.8.3.1.4.1,HPN-ICF-NQA-MIB::hpnicfNqaJitterStatsEntry,,not-accessible,pingCtlOwnerIndex:pingCtlTestName,current,,An entry contains the statistics for the latest jitter activity. This entry is created only if the pingCtlType is hpnicfNqajitter.
.1.3.6.1.4.1.11.2.14.11.15.8.3.1.4.1.1,HPN-ICF-NQA-MIB::hpnicfNqaJitterStatsNumOfRTT,Counter32,read-only,,current,,The number of received destination device responses with which jitter test can reach round-trip time.
.1.3.6.1.4.1.11.2.14.11.15.8.3.1.4.1.2,HPN-ICF-NQA-MIB::hpnicfNqaJitterStatsMinOfPositivesSD,Gauge32,read-only,,current,,The value of time that records the minimal positive jitter value from source to destination in the jitter test.
.1.3.6.1.4.1.11.2.14.11.15.8.3.1.4.1.3,HPN-ICF-NQA-MIB::hpnicfNqaJitterStatsMaxOfPositivesSD,Gauge32,read-only,,current,,The value of time that records the maximal positive jitter value from source to destination in the jitter test.
.1.3.6.1.4.1.11.2.14.11.15.8.3.1.4.1.4,HPN-ICF-NQA-MIB::hpnicfNqaJitterStatsNumOfPositivesSD,Gauge32,read-only,,current,,The number that records positive jitter times from source to destination in the jitter test. The total number of the value of all positive jitters in packets sent from source to destination.
.1.3.6.1.4.1.11.2.14.11.15.8.3.1.4.1.5,HPN-ICF-NQA-MIB::hpnicfNqaJitterStatsSumOfPositivesSD,Gauge32,read-only,,current,,The value of time that records the sum of positive jitter values from source to destination in the jitter test.
.1.3.6.1.4.1.11.2.14.11.15.8.3.1.4.1.6,HPN-ICF-NQA-MIB::hpnicfNqaJitterStatsSum2PositivesSD,Gauge32,read-only,,current,,The value of time that records the sum of square of positive jitter values from source to destination in the jitter test.
.1.3.6.1.4.1.11.2.14.11.15.8.3.1.4.1.7,HPN-ICF-NQA-MIB::hpnicfNqaJitterStatsMinOfNegativesSD,Gauge32,read-only,,current,,The value of time that records the minimal absolute values of negative jitter value from source to destination in the jitter test.
.1.3.6.1.4.1.11.2.14.11.15.8.3.1.4.1.8,HPN-ICF-NQA-MIB::hpnicfNqaJitterStatsMaxOfNegativesSD,Gauge32,read-only,,current,,The value of time that records the maximal absolute values of negative jitter value from source to destination in the jitter test.
.1.3.6.1.4.1.11.2.14.11.15.8.3.1.4.1.9,HPN-ICF-NQA-MIB::hpnicfNqaJitterStatsNumOfNegativesSD,Gauge32,read-only,,current,,The number that records negative jitter times from source to destination in the jitter test. The total number of all negative jitter values in packets sent from source to destination.
.1.3.6.1.4.1.11.2.14.11.15.8.3.1.4.1.10,HPN-ICF-NQA-MIB::hpnicfNqaJitterStatsSumOfNegativesSD,Gauge32,read-only,,current,,The value of time that records the sum of negative jitter values from source to destination in the jitter test. The total number of the value of all negative jitters in packets sent from source to destination.
.1.3.6.1.4.1.11.2.14.11.15.8.3.1.4.1.11,HPN-ICF-NQA-MIB::hpnicfNqaJitterStatsSum2NegativesSD,Gauge32,read-only,,current,,The value of time that records the sum of square of negative jitter values from source to destination in the jitter test.
.1.3.6.1.4.1.11.2.14.11.15.8.3.1.4.1.12,HPN-ICF-NQA-MIB::hpnicfNqaJitterStatsMinOfPositivesDS,Gauge32,read-only,,current,,The value of time that records the minimal positive jitter value from destination to source in the jitter test.
.1.3.6.1.4.1.11.2.14.11.15.8.3.1.4.1.13,HPN-ICF-NQA-MIB::hpnicfNqaJitterStatsMaxOfPositivesDS,Gauge32,read-only,,current,,The value of time that records the maximal positive jitter value from destination to source in the jitter test.
.1.3.6.1.4.1.11.2.14.11.15.8.3.1.4.1.14,HPN-ICF-NQA-MIB::hpnicfNqaJitterStatsNumOfPositivesDS,Gauge32,read-only,,current,,The number that records positive jitter times from destination to source in the jitter test.
.1.3.6.1.4.1.11.2.14.11.15.8.3.1.4.1.15,HPN-ICF-NQA-MIB::hpnicfNqaJitterStatsSumOfPositivesDS,Gauge32,read-only,,current,,The value of time that records the sum of positive jitter values from destination to source in the jitter test.
.1.3.6.1.4.1.11.2.14.11.15.8.3.1.4.1.16,HPN-ICF-NQA-MIB::hpnicfNqaJitterStatsSum2PositivesDS,Gauge32,read-only,,current,,The value of time that records the sum of square of positive jitter values from destination to source in the jitter test.
.1.3.6.1.4.1.11.2.14.11.15.8.3.1.4.1.17,HPN-ICF-NQA-MIB::hpnicfNqaJitterStatsMinOfNegativesDS,Gauge32,read-only,,current,,The value of time that records the minimal absolute values of negative jitter value from destination to source in the jitter test.
.1.3.6.1.4.1.11.2.14.11.15.8.3.1.4.1.18,HPN-ICF-NQA-MIB::hpnicfNqaJitterStatsMaxOfNegativesDS,Gauge32,read-only,,current,,The value of time that records the maximal absolute values of negative jitter value from destination to source in the jitter test.
.1.3.6.1.4.1.11.2.14.11.15.8.3.1.4.1.19,HPN-ICF-NQA-MIB::hpnicfNqaJitterStatsNumOfNegativesDS,Gauge32,read-only,,current,,The number that records negative jitter times from destination to source in the jitter test.
.1.3.6.1.4.1.11.2.14.11.15.8.3.1.4.1.20,HPN-ICF-NQA-MIB::hpnicfNqaJitterStatsSumOfNegativesDS,Gauge32,read-only,,current,,The value of time that records the sum of negative jitter values from destination to source in the jitter test.
.1.3.6.1.4.1.11.2.14.11.15.8.3.1.4.1.21,HPN-ICF-NQA-MIB::hpnicfNqaJitterStatsSum2NegativesDS,Gauge32,read-only,,current,,The value of time that records the sum of square of negative jitter values from destination to source in the jitter test.
.1.3.6.1.4.1.11.2.14.11.15.8.3.1.4.1.22,HPN-ICF-NQA-MIB::hpnicfNqaJitterStatsPacketLossSD,Gauge32,read-only,,current,,The lost packets number sent from source to destination.
.1.3.6.1.4.1.11.2.14.11.15.8.3.1.4.1.23,HPN-ICF-NQA-MIB::hpnicfNqaJitterStatsPacketLossDS,Gauge32,read-only,,current,,The lost packets number sent from destination to source.
.1.3.6.1.4.1.11.2.14.11.15.8.3.1.4.1.24,HPN-ICF-NQA-MIB::hpnicfNqaJitterStatsAvePositivesSD,Gauge32,read-only,,current,,The value of time that records the average positive jitter value from source to destination.
.1.3.6.1.4.1.11.2.14.11.15.8.3.1.4.1.25,HPN-ICF-NQA-MIB::hpnicfNqaJitterStatsAveNegativesSD,Gauge32,read-only,,current,,The value of time that records the average negative jitter value from source to destination.
.1.3.6.1.4.1.11.2.14.11.15.8.3.1.4.1.26,HPN-ICF-NQA-MIB::hpnicfNqaJitterStatsAvePositivesDS,Gauge32,read-only,,current,,The value of time that records the average positive jitter value from destination to source.
.1.3.6.1.4.1.11.2.14.11.15.8.3.1.4.1.27,HPN-ICF-NQA-MIB::hpnicfNqaJitterStatsAveNegativesDS,Gauge32,read-only,,current,,The value of time that records the average negative jitter value from destination to source.
.1.3.6.1.4.1.11.2.14.11.15.8.3.1.4.1.28,HPN-ICF-NQA-MIB::hpnicfNqaJitterStatsPktLossUnknown,Gauge32,read-only,,current,,The number of packets which is lost with unknown reason.
.1.3.6.1.4.1.11.2.14.11.15.8.3.1.4.1.29,HPN-ICF-NQA-MIB::hpnicfNqaJitterStatsOperOfICPIF,Gauge32,read-only,,current,,The ICPIF (Calculated Planning Impairment Factor) value for the latest jitter test.
.1.3.6.1.4.1.11.2.14.11.15.8.3.1.4.1.30,HPN-ICF-NQA-MIB::hpnicfNqaJitterStatsOperOfMOS,Gauge32,read-only,,current,,The MOS (Mean Opinion Score) value for the latest jitter test.
.1.3.6.1.4.1.11.2.14.11.15.8.3.1.5,HPN-ICF-NQA-MIB::hpnicfNqaAgentEnable,INTEGER,read-write,,current,enable(1):disable(2),Enable NQA agent function.
.1.3.6.1.4.1.11.2.14.11.15.8.3.1.6,HPN-ICF-NQA-MIB::hpnicfNqaTcpServerTable,,not-accessible,,current,,A table which contains the status of NQA tcp server configuration information.
.1.3.6.1.4.1.11.2.14.11.15.8.3.1.6.1,HPN-ICF-NQA-MIB::hpnicfNqaTcpServerEntry,,not-accessible,hpnicfNqaTcpServerIpAddress:hpnicfNqaTcpServerPort,current,,A table which contains the status of NQA tcp server configuration information. This entry includes not only the tcp server ip address but also the tcp server port.
.1.3.6.1.4.1.11.2.14.11.15.8.3.1.6.1.1,HPN-ICF-NQA-MIB::hpnicfNqaTcpServerIpAddress,OCTET,not-accessible,,current,,Tcp server's ip address.
.1.3.6.1.4.1.11.2.14.11.15.8.3.1.6.1.2,HPN-ICF-NQA-MIB::hpnicfNqaTcpServerPort,Integer32,not-accessible,,current,,Tcp server's port number.
.1.3.6.1.4.1.11.2.14.11.15.8.3.1.6.1.3,HPN-ICF-NQA-MIB::hpnicfNqaTcpServerRowStatus,INTEGER,read-create,,current,active(1):notInService(2):notReady(3):createAndGo(4):createAndWait(5):destroy(6),hpnicfNqaTcpServerIpAddress and hpnicfNqaTcpServerPort must be set during a creation operation.
.1.3.6.1.4.1.11.2.14.11.15.8.3.1.7,HPN-ICF-NQA-MIB::hpnicfNqaUdpServerTable,,not-accessible,,current,,Status of NQA udp server configuration information.
.1.3.6.1.4.1.11.2.14.11.15.8.3.1.7.1,HPN-ICF-NQA-MIB::hpnicfNqaUdpServerEntry,,not-accessible,hpnicfNqaUdpServerIpAddress:hpnicfNqaUdpServerPort,current,,This entry includes not only the udp server ip address but also the udp server udp port.
.1.3.6.1.4.1.11.2.14.11.15.8.3.1.7.1.1,HPN-ICF-NQA-MIB::hpnicfNqaUdpServerIpAddress,OCTET,not-accessible,,current,,Udp server's ip address.
.1.3.6.1.4.1.11.2.14.11.15.8.3.1.7.1.2,HPN-ICF-NQA-MIB::hpnicfNqaUdpServerPort,Integer32,not-accessible,,current,,Udp server's port number.
.1.3.6.1.4.1.11.2.14.11.15.8.3.1.7.1.3,HPN-ICF-NQA-MIB::hpnicfNqaUdpServerRowStatus,INTEGER,read-create,,current,active(1):notInService(2):notReady(3):createAndGo(4):createAndWait(5):destroy(6),hpnicfNqaUdpServerIpAddress and hpnicfNqaUdpServerPort must be set during a creation operation.
.1.3.6.1.4.1.11.2.14.11.15.8.3.1.8,HPN-ICF-NQA-MIB::hpnicfNqaServerEnable,INTEGER,read-write,,current,enable(1):disable(2),Enable NQA server function.
.1.3.6.1.4.1.11.2.14.11.15.8.3.1.9,HPN-ICF-NQA-MIB::hpnicfNqaStatsMaxGroupNumber,Integer32,read-only,,current,,The maximum number saved per group. The maximum value of hpnicfNqaCtlStatisticsGroupNumber can not exceed the value of this object.
.1.3.6.1.4.1.11.2.14.11.15.8.3.1.10,HPN-ICF-NQA-MIB::hpnicfNqaStatisticsCtlTable,,not-accessible,,current,,Defines the NQA statistics control table for providing, via SNMP, the capability of performing NQA operations at a remote host. The results of these operations are stored in the hpnicfNqaStatisticsResultsTable and the hpnicfNqaGroupStatsJitterTable.
.1.3.6.1.4.1.11.2.14.11.15.8.3.1.10.1,HPN-ICF-NQA-MIB::hpnicfNqaStatisticsCtlEntry,,not-accessible,,current,,Defines an entry in the hpnicfNqaStatisticsCtlTable. The hpnicfNqaStatisticsCtlTable has the same index as the pingCtlTable in order for a hpnicfNqaStatisticsCtlTable to correspond to the pingCtlEntry.
.1.3.6.1.4.1.11.2.14.11.15.8.3.1.10.1.1,HPN-ICF-NQA-MIB::hpnicfNqaCtlStatisticsInterval,Unsigned32,read-create,,current,,Statistic information will be calculated after the time that is the value of hpnicfNqaCtlStatisticsInterval.
.1.3.6.1.4.1.11.2.14.11.15.8.3.1.10.1.2,HPN-ICF-NQA-MIB::hpnicfNqaCtlStatisticsGroupNumber,Unsigned32,read-create,,current,,The value of this object indicates the number of group saved. The length of this object is from 1 to hpnicfNqaStatsMaxGroupNumber.
.1.3.6.1.4.1.11.2.14.11.15.8.3.1.10.1.3,HPN-ICF-NQA-MIB::hpnicfNqaCtlStatisticsKeptTime,Unsigned32,read-create,,current,,To indicate how long the statistic information will be saved after the test stops.
.1.3.6.1.4.1.11.2.14.11.15.8.3.1.10.1.4,HPN-ICF-NQA-MIB::hpnicfNqaCtlBeginTime,OCTET,read-create,,current,,Time at which the type-specified test will start.
.1.3.6.1.4.1.11.2.14.11.15.8.3.1.10.1.5,HPN-ICF-NQA-MIB::hpnicfNqaCtlLifeTime,Unsigned32,read-create,,current,,To indicate how long the type-specified test will last.
.1.3.6.1.4.1.11.2.14.11.15.8.3.1.11,HPN-ICF-NQA-MIB::hpnicfNqaStatisticsResultsTable,,not-accessible,,current,,Defines the NQA statistics results table for providing the capability of performing NQA operations at a remote host. The statistics results of these operations in a statistic cycle are stored in the hpnicfNqaStatisticsResultsTable. The statistic cycle is the value of hpnicfNqaCtlStatisticsInterval. The first two index identify the pingCtlEntry that the probe statistics result (HpnicfNqaStatisticsResultsEntry) belongs to.
.1.3.6.1.4.1.11.2.14.11.15.8.3.1.11.1,HPN-ICF-NQA-MIB::hpnicfNqaStatisticsResultsEntry,,not-accessible,pingCtlOwnerIndex:pingCtlTestName:hpnicfNqaStatResIndex,current,,Defines an entry in the hpnicfNqaStatisticsResultsTable. The hpnicfNqaStatisticsResultsTable has the same index as the pingCtlTable in order for a hpnicfNqaStatisticsResultsEntry to correspond to the pingCtlEntry that caused it to be created.
.1.3.6.1.4.1.11.2.14.11.15.8.3.1.11.1.1,HPN-ICF-NQA-MIB::hpnicfNqaStatResIndex,Unsigned32,not-accessible,,current,,An entry in this table is created when the statistics result of a NQA probe is determined. An implementation MUST start assigning hpnicfNqaStatResIndex values at 1 and wrap after exceeding the maximum possible value as defined by the limit of this object ('ffffffff'h).
.1.3.6.1.4.1.11.2.14.11.15.8.3.1.11.1.2,HPN-ICF-NQA-MIB::hpnicfNqaStatResIpTargetAddressType,INTEGER,read-only,,current,unknown(0):ipv4(1):ipv6(2):ipv4z(3):ipv6z(4):dns(16),This object indicates the type of address stored in the corresponding hpnicfNqaStatResIpTargetAddress object.
.1.3.6.1.4.1.11.2.14.11.15.8.3.1.11.1.3,HPN-ICF-NQA-MIB::hpnicfNqaStatResIpTargetAddress,OCTET,read-only,,current,,This object represent the host address to be used at a remote host for performing a network analysis operation.
.1.3.6.1.4.1.11.2.14.11.15.8.3.1.11.1.4,HPN-ICF-NQA-MIB::hpnicfNqaStatResMinRtt,Gauge32,read-only,,current,,The minimum NQA probe round-trip-time (RTT) received. The value of 0 for this object implies that no RTT has been received.
.1.3.6.1.4.1.11.2.14.11.15.8.3.1.11.1.5,HPN-ICF-NQA-MIB::hpnicfNqaStatResMaxRtt,Gauge32,read-only,,current,,The maximum NQA probe round-trip-time (RTT) received. The value of 0 for this object implies that no RTT has been received.
.1.3.6.1.4.1.11.2.14.11.15.8.3.1.11.1.6,HPN-ICF-NQA-MIB::hpnicfNqaStatResAverageRtt,Gauge32,read-only,,current,,The average NQA probe round-trip-time (RTT).
.1.3.6.1.4.1.11.2.14.11.15.8.3.1.11.1.7,HPN-ICF-NQA-MIB::hpnicfNqaStatResProbeResponses,Counter32,read-only,,current,,The number of responses received. The value of this object MUST be reported as 0 when no probe responses have been received.
.1.3.6.1.4.1.11.2.14.11.15.8.3.1.11.1.8,HPN-ICF-NQA-MIB::hpnicfNqaStatResSentProbes,Counter32,read-only,,current,,The value of this object reflects the number of probes sent. The value of this object MUST be reported as 0 when no probes have been sent.
.1.3.6.1.4.1.11.2.14.11.15.8.3.1.11.1.9,HPN-ICF-NQA-MIB::hpnicfNqaStatResRttSumOfSquares,Counter32,read-only,,current,,This object contains the sum of the squares for all NQA responses received. The value of this object MUST be reported as 0 when no NQA responses have been received.
.1.3.6.1.4.1.11.2.14.11.15.8.3.1.11.1.10,HPN-ICF-NQA-MIB::hpnicfNqaStatResStartTime,OCTET,read-only,,current,,This object contains the start time of the statistic.
.1.3.6.1.4.1.11.2.14.11.15.8.3.1.11.1.11,HPN-ICF-NQA-MIB::hpnicfNqaStatResInterval,Gauge32,read-only,,current,,This object contains the interval between two times of statistic.
.1.3.6.1.4.1.11.2.14.11.15.8.3.1.11.1.12,HPN-ICF-NQA-MIB::hpnicfNqaStatResRttNumDisconnects,Counter32,read-only,,current,,The number of times that a NQA probe failed because the destination became disconnected. For connectionless protocol pingCtlTypes, this number should be zero.
.1.3.6.1.4.1.11.2.14.11.15.8.3.1.11.1.13,HPN-ICF-NQA-MIB::hpnicfNqaStatResRttTimeouts,Counter32,read-only,,current,,The number of times that a probe failed because the probe timed out.
.1.3.6.1.4.1.11.2.14.11.15.8.3.1.11.1.14,HPN-ICF-NQA-MIB::hpnicfNqaStatResRttBusies,Counter32,read-only,,current,,The number of times that a NQA probe failed because errors related to sockets.
.1.3.6.1.4.1.11.2.14.11.15.8.3.1.11.1.15,HPN-ICF-NQA-MIB::hpnicfNqaStatResRttNoConnections,Counter32,read-only,,current,,The number of times that a NQA probe failed because the probe destination is unavailable. For connectionless protocol pingCtlTypes, this number should be zero.
.1.3.6.1.4.1.11.2.14.11.15.8.3.1.11.1.16,HPN-ICF-NQA-MIB::hpnicfNqaStatResRttDrops,Counter32,read-only,,current,,The number of times that a NQA operation failed to initiate for unavailibility of necessary internal resources.
.1.3.6.1.4.1.11.2.14.11.15.8.3.1.11.1.17,HPN-ICF-NQA-MIB::hpnicfNqaStatResRttSequenceErrors,Counter32,read-only,,current,,The number of packets arrived out of sequence.
.1.3.6.1.4.1.11.2.14.11.15.8.3.1.11.1.18,HPN-ICF-NQA-MIB::hpnicfNqaStatResRttErrors,Counter32,read-only,,current,,The number of other errors.
.1.3.6.1.4.1.11.2.14.11.15.8.3.1.11.1.19,HPN-ICF-NQA-MIB::hpnicfNqaStatResLostPacketRatio,Gauge32,read-only,,current,,The value of this object reflects the drop rate of NQA test packet. For example, if the value is 30, that means source device only had received 70 percent packets of total sent packets.
.1.3.6.1.4.1.11.2.14.11.15.8.3.1.11.1.20,HPN-ICF-NQA-MIB::hpnicfNqaStatResPacketLateArrival,Counter32,read-only,,current,,The value of this object reflects the number of the packets that arrived after the timeout.
.1.3.6.1.4.1.11.2.14.11.15.8.3.1.11.1.21,HPN-ICF-NQA-MIB::hpnicfNqaStatResRttSum,Counter32,read-only,,current,,This object contains the sum of the squares for all NQA responses received during the test lifetime. The value of this object MUST be reported as 0 when no NQA responses have been received.
.1.3.6.1.4.1.11.2.14.11.15.8.3.1.11.1.22,HPN-ICF-NQA-MIB::hpnicfNqaStatResNumOfDelaySD,Counter32,read-only,,current,,The number of one way times from source to destination that are successfully measured.
.1.3.6.1.4.1.11.2.14.11.15.8.3.1.11.1.23,HPN-ICF-NQA-MIB::hpnicfNqaStatResMinDelaySD,Gauge32,read-only,,current,,The minimum one way times from source to destination.
.1.3.6.1.4.1.11.2.14.11.15.8.3.1.11.1.24,HPN-ICF-NQA-MIB::hpnicfNqaStatResMaxDelaySD,Gauge32,read-only,,current,,The maximum one way times from source to destination.
.1.3.6.1.4.1.11.2.14.11.15.8.3.1.11.1.25,HPN-ICF-NQA-MIB::hpnicfNqaStatResSumDelaySD,Counter32,read-only,,current,,The sum of one way times from source to destination.
.1.3.6.1.4.1.11.2.14.11.15.8.3.1.11.1.26,HPN-ICF-NQA-MIB::hpnicfNqaStatResSum2DelaySD,Counter32,read-only,,current,,The sum of squares of one way times from source to destination.
.1.3.6.1.4.1.11.2.14.11.15.8.3.1.11.1.27,HPN-ICF-NQA-MIB::hpnicfNqaStatResNumOfDelayDS,Counter32,read-only,,current,,The number of one way times from destination to source that are successfully measured.
.1.3.6.1.4.1.11.2.14.11.15.8.3.1.11.1.28,HPN-ICF-NQA-MIB::hpnicfNqaStatResMinDelayDS,Gauge32,read-only,,current,,The minimum one way times from destination to source.
.1.3.6.1.4.1.11.2.14.11.15.8.3.1.11.1.29,HPN-ICF-NQA-MIB::hpnicfNqaStatResMaxDelayDS,Gauge32,read-only,,current,,The maximum one way times from destination to source.
.1.3.6.1.4.1.11.2.14.11.15.8.3.1.11.1.30,HPN-ICF-NQA-MIB::hpnicfNqaStatResSumDelayDS,Counter32,read-only,,current,,The sum of one way times from destination to source.
.1.3.6.1.4.1.11.2.14.11.15.8.3.1.11.1.31,HPN-ICF-NQA-MIB::hpnicfNqaStatResSum2DelayDS,Counter32,read-only,,current,,The sum of squares of one way times from destination to source.
.1.3.6.1.4.1.11.2.14.11.15.8.3.1.12,HPN-ICF-NQA-MIB::hpnicfNqaGroupStatsJitterTable,,not-accessible,,current,,Test Group Statistic table for jitter activity in a statistic cycle. The statistic cycle is the value of hpnicfNqaCtlStatisticsInterval. The first two index identify the pingCtlEntry that a probe statistics result (HpnicfNqaStatisticsResultsEntry) belongs to.
.1.3.6.1.4.1.11.2.14.11.15.8.3.1.12.1,HPN-ICF-NQA-MIB::hpnicfNqaGroupStatsJitterEntry,,not-accessible,pingCtlOwnerIndex:pingCtlTestName:hpnicfNqaStatJitterIndex,current,,An entry contains the group statistic information for jitter activity. This entry is created only if the pingCtlType is hpnicfNqajitter.
.1.3.6.1.4.1.11.2.14.11.15.8.3.1.12.1.1,HPN-ICF-NQA-MIB::hpnicfNqaStatJitterIndex,Unsigned32,not-accessible,,current,,An entry in this table is created when the statistic result of a NQA probe in a statistic cycle is determined. An implementation MUST start assigning hpnicfNqaStatJitterIndex values at 1 and wrap after exceeding the maximum possible value as defined by the limit of this object ('ffffffff'h).
.1.3.6.1.4.1.11.2.14.11.15.8.3.1.12.1.2,HPN-ICF-NQA-MIB::hpnicfNqaStatJitterMinOfPosSD,Gauge32,read-only,,current,,The value of time that records the minimal positive jitter value from source to destination in jitter test.
.1.3.6.1.4.1.11.2.14.11.15.8.3.1.12.1.3,HPN-ICF-NQA-MIB::hpnicfNqaStatJitterMaxOfPosSD,Gauge32,read-only,,current,,The value of time that records the maximal positive jitter value from source to destination in the jitter test.
.1.3.6.1.4.1.11.2.14.11.15.8.3.1.12.1.4,HPN-ICF-NQA-MIB::hpnicfNqaStatJitterNumOfPosSD,Counter32,read-only,,current,,The total number of positive jitters from source to destination in the jitter test.
.1.3.6.1.4.1.11.2.14.11.15.8.3.1.12.1.5,HPN-ICF-NQA-MIB::hpnicfNqaStatJitterSumOfPosSD,Counter32,read-only,,current,,The value of time that records the sum of positive jitter values from source to destination in the jitter test.
.1.3.6.1.4.1.11.2.14.11.15.8.3.1.12.1.6,HPN-ICF-NQA-MIB::hpnicfNqaStatJitterSumOfSquarePosSD,Counter32,read-only,,current,,The value of time that records the sum of square of positive jitter values from source to destination in the jitter test.
.1.3.6.1.4.1.11.2.14.11.15.8.3.1.12.1.7,HPN-ICF-NQA-MIB::hpnicfNqaStatJitterMinOfNegSD,Gauge32,read-only,,current,,The value of time that records the minimal absolute values of negative jitter value from source to destination in the jitter test.
.1.3.6.1.4.1.11.2.14.11.15.8.3.1.12.1.8,HPN-ICF-NQA-MIB::hpnicfNqaStatJitterMaxOfNegSD,Gauge32,read-only,,current,,The value of time that records the maximal absolute values of negative jitter value from source to destination in the jitter test.
.1.3.6.1.4.1.11.2.14.11.15.8.3.1.12.1.9,HPN-ICF-NQA-MIB::hpnicfNqaStatJitterNumOfNegSD,Counter32,read-only,,current,,The total number of negative jitters from source to destination in the jitter test.
.1.3.6.1.4.1.11.2.14.11.15.8.3.1.12.1.10,HPN-ICF-NQA-MIB::hpnicfNqaStatJitterSumOfNegSD,Counter32,read-only,,current,,The value of time that records the sum of negative jitter values from source to destination in the jitter test.
.1.3.6.1.4.1.11.2.14.11.15.8.3.1.12.1.11,HPN-ICF-NQA-MIB::hpnicfNqaStatJitterSumOfSquareNegSD,Counter32,read-only,,current,,The value of time that records the sum of square of negative jitter values from source to destination in the jitter test.
.1.3.6.1.4.1.11.2.14.11.15.8.3.1.12.1.12,HPN-ICF-NQA-MIB::hpnicfNqaStatJitterMinOfPosDS,Gauge32,read-only,,current,,The value of time that records the minimal positive jitter value from destination to source in the jitter test.
.1.3.6.1.4.1.11.2.14.11.15.8.3.1.12.1.13,HPN-ICF-NQA-MIB::hpnicfNqaStatJitterMaxOfPosDS,Gauge32,read-only,,current,,The value of time that records the maximal positive jitter value from destination to source in the jitter test.
.1.3.6.1.4.1.11.2.14.11.15.8.3.1.12.1.14,HPN-ICF-NQA-MIB::hpnicfNqaStatJitterNumOfPosDS,Counter32,read-only,,current,,The total number of positive jitters from destination to source in the jitter test.
.1.3.6.1.4.1.11.2.14.11.15.8.3.1.12.1.15,HPN-ICF-NQA-MIB::hpnicfNqaStatJitterSumOfPosDS,Counter32,read-only,,current,,The value of time that records the sum of positive jitter values from destination to source in the jitter test.
.1.3.6.1.4.1.11.2.14.11.15.8.3.1.12.1.16,HPN-ICF-NQA-MIB::hpnicfNqaStatJitterSumOfSquarePosDS,Counter32,read-only,,current,,The value of time that records the sum of square of positive jitter values destination to source in the jitter test.
.1.3.6.1.4.1.11.2.14.11.15.8.3.1.12.1.17,HPN-ICF-NQA-MIB::hpnicfNqaStatJitterMinOfNegDS,Gauge32,read-only,,current,,The value of time that records the minimal absolute values of negative jitter value from destination to source in the jitter test.
.1.3.6.1.4.1.11.2.14.11.15.8.3.1.12.1.18,HPN-ICF-NQA-MIB::hpnicfNqaStatJitterMaxOfNegDS,Gauge32,read-only,,current,,The value of time that records the maximal absolute values of negative jitter value from destination to source in the jitter test.
.1.3.6.1.4.1.11.2.14.11.15.8.3.1.12.1.19,HPN-ICF-NQA-MIB::hpnicfNqaStatJitterNumOfNegDS,Counter32,read-only,,current,,The total number of negative jitters from destination to source in the jitter test.
.1.3.6.1.4.1.11.2.14.11.15.8.3.1.12.1.20,HPN-ICF-NQA-MIB::hpnicfNqaStatJitterSumOfNegDS,Counter32,read-only,,current,,The value of time that records the sum of negative jitter values from destination to source in the jitter test.
.1.3.6.1.4.1.11.2.14.11.15.8.3.1.12.1.21,HPN-ICF-NQA-MIB::hpnicfNqaStatJitterSumOfSquareNegDS,Counter32,read-only,,current,,The value of time that records the sum of square of negative jitter values from destination to source in the jitter test.
.1.3.6.1.4.1.11.2.14.11.15.8.3.1.12.1.22,HPN-ICF-NQA-MIB::hpnicfNqaStatJitterPacketLossSD,Counter32,read-only,,current,,The lost packets number sent from source to destination.
.1.3.6.1.4.1.11.2.14.11.15.8.3.1.12.1.23,HPN-ICF-NQA-MIB::hpnicfNqaStatJitterPacketLossDS,Counter32,read-only,,current,,The lost packets number sent from destination to source.
.1.3.6.1.4.1.11.2.14.11.15.8.3.1.12.1.24,HPN-ICF-NQA-MIB::hpnicfNqaStatJitterAvePosSD,Gauge32,read-only,,current,,The value of time that records the average positive jitter value from source to destination.
.1.3.6.1.4.1.11.2.14.11.15.8.3.1.12.1.25,HPN-ICF-NQA-MIB::hpnicfNqaStatJitterAveNegSD,Gauge32,read-only,,current,,The value of time that records the average negative jitter value from source to destination.
.1.3.6.1.4.1.11.2.14.11.15.8.3.1.12.1.26,HPN-ICF-NQA-MIB::hpnicfNqaStatJitterAvePosDS,Gauge32,read-only,,current,,The value of time that records the average positive jitter value from destination to source.
.1.3.6.1.4.1.11.2.14.11.15.8.3.1.12.1.27,HPN-ICF-NQA-MIB::hpnicfNqaStatJitterAveNegDS,Gauge32,read-only,,current,,The value of time that records the average negative jitter value from destination to source.
.1.3.6.1.4.1.11.2.14.11.15.8.3.1.12.1.28,HPN-ICF-NQA-MIB::hpnicfNqaStatJitterPktLossUnknown,Counter32,read-only,,current,,The number of packets which is lost with unknown reason.
.1.3.6.1.4.1.11.2.14.11.15.8.3.1.12.1.29,HPN-ICF-NQA-MIB::hpnicfNqaStatJitterMaxOfICPIF,Gauge32,read-only,,current,,The maximum of all ICPIF values in a statistic cycle for jitter test.
.1.3.6.1.4.1.11.2.14.11.15.8.3.1.12.1.30,HPN-ICF-NQA-MIB::hpnicfNqaStatJitterMinOfICPIF,Gauge32,read-only,,current,,The minimum of all ICPIF values in a statistic cycle for jitter test.
.1.3.6.1.4.1.11.2.14.11.15.8.3.1.12.1.31,HPN-ICF-NQA-MIB::hpnicfNqaStatJitterMaxOfMOS,Gauge32,read-only,,current,,The maximum of all MOS values in a statistic cycle for jitter test.
.1.3.6.1.4.1.11.2.14.11.15.8.3.1.12.1.32,HPN-ICF-NQA-MIB::hpnicfNqaStatJitterMinOfMOS,Gauge32,read-only,,current,,The minimum of all MOS values in a statistic cycle for jitter test.
.1.3.6.1.4.1.11.2.14.11.15.8.3.1.13,HPN-ICF-NQA-MIB::hpnicfNqaReactionTable,,not-accessible,,current,,A table of NQA test monitoring notification and reaction configuration definitions. An entry is removed from this table when its corresponding pingCtlEntry is deleted.
.1.3.6.1.4.1.11.2.14.11.15.8.3.1.13.1,HPN-ICF-NQA-MIB::hpnicfNqaReactionEntry,,not-accessible,hpnicfNqaReactOwnerIndex:hpnicfNqaReactTestName:hpnicfNqaReactItemIndex,current,,Defines an entry in the hpnicfNqaReactionTable. The first two index elements identify the pingCtlEntry that a hpnicfNqaReactItemIndex belongs to. The third index element selects a single reaction.
.1.3.6.1.4.1.11.2.14.11.15.8.3.1.13.1.1,HPN-ICF-NQA-MIB::hpnicfNqaReactOwnerIndex,OCTET,accessible-for-notify,,current,,The first index of hpnicfNqaReactionTable, it is the same as pingCtlOwnerIndex in pingCtlTable. hpnicfNqaReactOwnerIndex and hpnicfNqaReactTestName identify an existed test.
.1.3.6.1.4.1.11.2.14.11.15.8.3.1.13.1.2,HPN-ICF-NQA-MIB::hpnicfNqaReactTestName,OCTET,accessible-for-notify,,current,,The second index of hpnicfNqaReactionTable, it is the same as pingCtlTestName in pingCtlTable. hpnicfNqaReactOwnerIndex and hpnicfNqaReactTestName identify an existed test.
.1.3.6.1.4.1.11.2.14.11.15.8.3.1.13.1.3,HPN-ICF-NQA-MIB::hpnicfNqaReactItemIndex,Unsigned32,accessible-for-notify,,current,,The third index of hpnicfNqaReactionTable, it definitely identifies one of the reaction configurations for a test.
.1.3.6.1.4.1.11.2.14.11.15.8.3.1.13.1.4,HPN-ICF-NQA-MIB::hpnicfNqaReactCheckedElement,INTEGER,read-create,,current,probetime(1):probefailure(2):jitterrtt(3):jitterpacketloss(4):jittersd(5):jitterds(6):icpif(7):mos(8):jitterOwdSD(9):jitterOwdDS(10),A list of reaction condition type. 'probetime' and 'probefailure' are valid when pingCtlType of the test is not hpnicfNqajitter. 'jitterOwdSD': one way time from source to destination in jitter test. 'jitterOwdDS': one way time from destination to source in jitter test. 'jitterrtt', 'jitterpacketloss', 'jittersd', 'jitterds', 'jitterOwdSD' and 'jitterOwdDS' are valid when pingCtlType of the test is hpnicfNqajitter. 'icpif' and 'mos' are valid when pingCtlType of the test is hpnicfNqajitter and hpnicfNqaCtlCodecType is 'g711Alaw' or 'g711Ulaw' or 'g729A'.
.1.3.6.1.4.1.11.2.14.11.15.8.3.1.13.1.5,HPN-ICF-NQA-MIB::hpnicfNqaReactThresholdUpperLimit,Unsigned32,read-create,,current,,This object defines an administrative upper-threshold value for hpnicfNqaReactCheckedElement. The value of this object is zero if hpnicfNqaReactCheckedElement is specified as 'jitterpacketloss' and 'probefailure'.
.1.3.6.1.4.1.11.2.14.11.15.8.3.1.13.1.6,HPN-ICF-NQA-MIB::hpnicfNqaReactThresholdLowerLimit,Unsigned32,read-create,,current,,This object defines an administrative lower-threshold value for hpnicfNqaReactCheckedElement. The value of hpnicfNqaReactThresholdLowerLimit should be equal or less than the value of hpnicfNqaReactThresholdUpperLimit. The value of this object is zero if hpnicfNqaReactCheckedElement is specified as 'jitterpacketloss' and 'probefailure'.
.1.3.6.1.4.1.11.2.14.11.15.8.3.1.13.1.7,HPN-ICF-NQA-MIB::hpnicfNqaReactThresholdType,INTEGER,read-create,,current,invalid(0):average(1):consecutive(2):accumulative(3),This object defines the reaction threshold types. invalid(0): Invalid value. average(1): If reaction threshold type is average and the average value of watched operation exceeds threshold limit, an action specified in hpnicfNqaReactActionType is generated when hpnicfNqaReactCurrentStatus changes. consecutive(2): If reaction threshold type is consecutive and the times of watched operation consecutively exceeds the limit specified by hpnicfNqaReactThresholdConsecNum, an action specified in hpnicfNqaReactActionType is generated when hpnicfNqaReactCurrentStatus changes. accumulative(3): If reaction threshold type is accumulative and the times of watched operation accumulatively exceeds the limit specified by hpnicfNqaReactThresholdAccumNum, an action specified in hpnicfNqaReactActionType is generated when hpnicfNqaReactCurrentStatus changes. If reaction threshold type is not configured, the value of this object is 'invalid'.
.1.3.6.1.4.1.11.2.14.11.15.8.3.1.13.1.8,HPN-ICF-NQA-MIB::hpnicfNqaReactThresholdConsecNum,Unsigned32,read-create,,current,,This object defines a consecutive threshold limit. The value is zero when hpnicfNqaReactThresholdType is not 'consecutive'.
.1.3.6.1.4.1.11.2.14.11.15.8.3.1.13.1.9,HPN-ICF-NQA-MIB::hpnicfNqaReactThresholdAccumNum,Unsigned32,read-create,,current,,This object defines an accumulative threshold limit. The value is zero when the hpnicfNqaReactThresholdType is not 'accumulative'.
.1.3.6.1.4.1.11.2.14.11.15.8.3.1.13.1.10,HPN-ICF-NQA-MIB::hpnicfNqaReactActionType,INTEGER,read-create,,current,none(0):trapOnly(1):triggerOnly(2):trapAndTrigger(3),Specifies the type of reaction to generate if the specified violation type occurs for the monitored element: none - No reaction is generated trapOnly - A trap is generated triggerOnly - All trigger actions defined for this entry are generated trapAndTrigger - Both a trap and all trigger actions are generated 
.1.3.6.1.4.1.11.2.14.11.15.8.3.1.13.1.11,HPN-ICF-NQA-MIB::hpnicfNqaReactCurrentStatus,INTEGER,read-only,,current,invalid(1):overThreshold(2):belowThreshold(3),Specifies the current status of this reaction entry: invalid - The status of the reaction entry is unknown. overThreshold - The status of the reaction entry is overThreshold when the monitored result exceeds the threshold value for the hpnicfNqaReactThresholdType. belowThreshold - The status of the reaction entry is belowThreshold when the monitored result is under the threshold value for the hpnicfNqaReactThresholdType.
.1.3.6.1.4.1.11.2.14.11.15.8.3.1.13.1.12,HPN-ICF-NQA-MIB::hpnicfNqaReactRowStatus,INTEGER,read-create,,current,active(1):notInService(2):notReady(3):createAndGo(4):createAndWait(5):destroy(6),This object allows entries to be created and deleted in the hpnicfNqaReactionTable. Creation of an entry in this table results in a new set of reaction configurations which take effect immediately. Deletion of an entry in this table results in corresponding reaction configurations are being deleted and stop taking effect.
.1.3.6.1.4.1.11.2.14.11.15.8.3.1.13.1.13,HPN-ICF-NQA-MIB::hpnicfNqaReactCheckedNum,Unsigned32,read-only,,current,,The number of checked element samples that are monitored.
.1.3.6.1.4.1.11.2.14.11.15.8.3.1.13.1.14,HPN-ICF-NQA-MIB::hpnicfNqaReactThresholdNum,Unsigned32,read-only,,current,,The number of checked element samples that are over threshold.
.1.3.6.1.4.1.11.2.14.11.15.8.3.1.14,HPN-ICF-NQA-MIB::hpnicfNqaStatisticsReactionTable,,not-accessible,,current,,A table of NQA test monitoring notification and reaction configuration definitions. An entry is removed from this table when its corresponding pingCtlEntry is deleted.
.1.3.6.1.4.1.11.2.14.11.15.8.3.1.14.1,HPN-ICF-NQA-MIB::hpnicfNqaStatisticsReactionEntry,,not-accessible,hpnicfNqaStatReactOwnerIndex:hpnicfNqaStatReactTestName:hpnicfNqaStatReactIndex:hpnicfNqaStatReactItemIndex,current,,Defines an entry in the hpnicfNqaStatisticsReactionTable. The first two index elements identify the pingCtlEntry that a hpnicfNqaReactItemIndex belongs to. The third index element identifies an entry in the hpnicfNqaStatisticsResultsTable. The forth index element selects a single reaction.
.1.3.6.1.4.1.11.2.14.11.15.8.3.1.14.1.1,HPN-ICF-NQA-MIB::hpnicfNqaStatReactOwnerIndex,OCTET,not-accessible,,current,,The first index of hpnicfNqaStatisticsReactionTable, it is the same as pingCtlOwnerIndex in pingCtlTable.
.1.3.6.1.4.1.11.2.14.11.15.8.3.1.14.1.2,HPN-ICF-NQA-MIB::hpnicfNqaStatReactTestName,OCTET,not-accessible,,current,,The second index of hpnicfNqaStatisticsReactionTable, it is the same as pingCtlTestName in pingCtlTable.
.1.3.6.1.4.1.11.2.14.11.15.8.3.1.14.1.3,HPN-ICF-NQA-MIB::hpnicfNqaStatReactIndex,Unsigned32,not-accessible,,current,,The third index of hpnicfNqaStatisticsReactionTable. An entry in this table is created when the statistics result of a NQA probe is determined. An implementation MUST start assigning hpnicfNqaStatResIndex values at 1 and wrap after exceeding the maximum possible value as defined by the limit of this object ('ffffffff'h).
.1.3.6.1.4.1.11.2.14.11.15.8.3.1.14.1.4,HPN-ICF-NQA-MIB::hpnicfNqaStatReactItemIndex,Unsigned32,not-accessible,,current,,The forth index of hpnicfNqaStatisticsReactionTable, it definitely identifies one of the reaction configurations for a test
.1.3.6.1.4.1.11.2.14.11.15.8.3.1.14.1.5,HPN-ICF-NQA-MIB::hpnicfNqaStatReactCheckedNum,Counter32,read-only,,current,,The number of checked element samples that are monitored.
.1.3.6.1.4.1.11.2.14.11.15.8.3.1.14.1.6,HPN-ICF-NQA-MIB::hpnicfNqaStatReactThresholdNum,Counter32,read-only,,current,,The number of checked element samples that are over threshold.
.1.3.6.1.4.1.11.2.14.11.15.8.3.2,HPN-ICF-NQA-MIB::hpnicfNqaImplementationTypeDomains,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.8.3.2.1,HPN-ICF-NQA-MIB::hpnicfNqaUdpEcho,,,,,,Indicates that an implementation is using the UDP based echo server. Notes: The hpnicfNqaCtlTargetPort and hpnicfNqaCtlSourcePort need to be set, while in the pingUdpEcho Node, hpnicfNqaCtlTargetPort must be set to the default value.
.1.3.6.1.4.1.11.2.14.11.15.8.3.2.2,HPN-ICF-NQA-MIB::hpnicfNqaTcpconnect,,,,,,Indicates that an implementation is attempting to connect to a TCP port in order to calculate a round trip time. Notes: The hpnicfNqaCtlTargetPort and hpnicfNqaCtlSourcePort need to be set, while in the pingTcpConnectionAttempt Node, hpnicfNqaCtlTargetPort must be set to the default value.
.1.3.6.1.4.1.11.2.14.11.15.8.3.2.3,HPN-ICF-NQA-MIB::hpnicfNqajitter,,,,,,Indicates that an implementation is using udp for packet transfers. 'jitter' will cause the NQA(Network Quality Analysis) application to perform delay variance analysis.
.1.3.6.1.4.1.11.2.14.11.15.8.3.2.4,HPN-ICF-NQA-MIB::hpnicfNqaHttp,,,,,,Indicates that an implementation is using udp for name resolution, tcp connect and tcp data transfer mechanisms for HTTP data download from a particular HTTP Server. It causes the NQA application to perform a download of the object specified in the URL.
.1.3.6.1.4.1.11.2.14.11.15.8.3.2.5,HPN-ICF-NQA-MIB::hpnicfNqadlsw,,,,,,Indicates that an implementation is using tcp for sending keepalives. 'dlsw' will cause the NQA application to perform a keepalive operation to measure the response time of a DLSw peer.
.1.3.6.1.4.1.11.2.14.11.15.8.3.2.6,HPN-ICF-NQA-MIB::hpnicfNqadhcp,,,,,,Indicates that an implementation is using udp for sending dhcp requests. 'dhcp' will cause the NQA application to perform an IP Address lease request/teardown operation.
.1.3.6.1.4.1.11.2.14.11.15.8.3.2.7,HPN-ICF-NQA-MIB::hpnicfNqaftp,,,,,,Indicates that an implementation is using tcp packet for ftp connect and data transfer.
.1.3.6.1.4.1.11.2.14.11.15.8.3.3,HPN-ICF-NQA-MIB::hpnicfNqaNotifications,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.8.3.3.1,HPN-ICF-NQA-MIB::hpnicfNqaProbeTimeOverThreshold,,,,,,It is generated when the value of hpnicfNqaReactCurrentStatus changes. The change may occur when the watched condition is over threshold or below threshold. The over threshold situations is specified as below. 1. Probe time(equals to RTT for some type of tests) is not in the range hpnicfNqaReactThresholdLowerLimit through hpnicfNqaReactThresholdUpperLimit. 2. The probe time is accumulatively not in the range hpnicfNqaReactThresholdLowerLimit through hpnicfNqaReactThresholdUpperLimit for a number of times specified in hpnicfNqaReactThresholdAccumNum. 3. The probe time is consecutively in the range hpnicfNqaReactThresholdLowerLimit through hpnicfNqaReactThresholdUpperLimit for a number of times specified in hpnicfNqaReactThresholdConsecNum. This notification is valid only when hpnicfNqaReactActionType is 'trapOnly' or 'trapAndTrigger' and pingCtlType of the test is not hpnicfNqajitter.
.1.3.6.1.4.1.11.2.14.11.15.8.3.3.2,HPN-ICF-NQA-MIB::hpnicfNqaJitterRTTOverThreshold,,,,,,It is generated when the value of hpnicfNqaReactCurrentStatus changes. The change may occur when the watched condition is over threshold or below threshold. The over threshold situations is specified as below. 1. The average NQA round-trip-time (RTT) of jitter packets is not in the range hpnicfNqaReactThresholdLowerLimit through hpnicfNqaReactThresholdUpperLimit. 2. The RTT of jitter packets is accumulatively not in the range hpnicfNqaReactThresholdLowerLimit through hpnicfNqaReactThresholdUpperLimit for a number of times specified in hpnicfNqaReactThresholdAccumNum in one test. This notification is valid only when hpnicfNqaReactActionType is 'trapOnly' or 'trapAndTrigger' and pingCtlType of the test is hpnicfNqajitter.
.1.3.6.1.4.1.11.2.14.11.15.8.3.3.3,HPN-ICF-NQA-MIB::hpnicfNqaProbeFailure,,,,,,It is generated when the value of hpnicfNqaReactCurrentStatus changes. The change may occur when the watched condition is over threshold or below threshold. The over threshold situations is specified as below. 1. When the probe test accumulatively failed for a number of times specified in hpnicfNqaReactThresholdAccumNum in one test while the value of hpnicfNqaReactThresholdType is 'accumulative'. 2. When the probe test consecutively failed for a number of times specified in hpnicfNqaReactThresholdConsecNum in one test while the value of hpnicfNqaReactThresholdType is 'consecutive'. This notification is valid only when hpnicfNqaReactActionType is 'trapOnly' or 'trapAndTrigger' and pingCtlType of the test is not hpnicfNqajitter.
.1.3.6.1.4.1.11.2.14.11.15.8.3.3.4,HPN-ICF-NQA-MIB::hpnicfNqaJitterPacketLoss,,,,,,It is generated when the value of hpnicfNqaReactCurrentStatus changes. The change may occur when the watched condition is over threshold or below threshold. The over threshold situations is specified as below. 1. When the jitter packets accumulatively lost for a number of times specified in hpnicfNqaReactThresholdAccumNum in one test while the value of hpnicfNqaReactThresholdType is 'accumulative'. This notification is valid only when hpnicfNqaReactActionType is 'trapOnly' or 'trapAndTrigger' and pingCtlType of the test is hpnicfNqajitter.
.1.3.6.1.4.1.11.2.14.11.15.8.3.3.5,HPN-ICF-NQA-MIB::hpnicfNqaJitterSDOverThreshold,,,,,,The SD means the jitter values from source to destination. It is generated when the value of hpnicfNqaReactCurrentStatus changes. The change may occur when the watched condition is over threshold or below threshold. The over threshold situations is specified as below. 1. The average of SD in one jitter test is not in the range hpnicfNqaReactThresholdLowerLimit through hpnicfNqaReactThresholdUpperLimit and the hpnicfNqaReactThresholdType is specified as 'average' type. 2. The average of SD in one jitter test is accumulatively not in the range hpnicfNqaReactThresholdLowerLimit through hpnicfNqaReactThresholdUpperLimit for a number of times specified in hpnicfNqaReactThresholdAccumNum and the hpnicfNqaReactThresholdType is specified as 'accumulative' type. This notification is valid only when hpnicfNqaReactActionType is 'trapOnly' or 'trapAndTrigger' and pingCtlType of the test is hpnicfNqajitter.
.1.3.6.1.4.1.11.2.14.11.15.8.3.3.6,HPN-ICF-NQA-MIB::hpnicfNqaJitterDSOverThreshold,,,,,,The DS means the jitter values from destination to source. It is generated when the value of hpnicfNqaReactCurrentStatus changes. The change may occur when the watched condition is over threshold or below threshold. The over threshold situations is specified as below. 1. The average of DS in one jitter test is not in the range hpnicfNqaReactThresholdLowerLimit through hpnicfNqaReactThresholdUpperLimit and the hpnicfNqaReactThresholdType is specified as 'average' type. 2. The average of DS in one jitter test is accumulatively not in the range hpnicfNqaReactThresholdLowerLimit through hpnicfNqaReactThresholdUpperLimit for a number of times specified in hpnicfNqaReactThresholdAccumNum and the hpnicfNqaReactThresholdType is specified as 'accumulative' type. This notification is valid only when hpnicfNqaReactActionType is 'trapOnly' or 'trapAndTrigger' and pingCtlType of the test is hpnicfNqajitter.
.1.3.6.1.4.1.11.2.14.11.15.8.3.3.7,HPN-ICF-NQA-MIB::hpnicfNqaICPIFOverThreshold,,,,,,It is generated when the value of hpnicfNqaReactCurrentStatus changes. The change may occur when the watched condition is over threshold or below threshold. The over threshold situations is specified as below. 1. When the ICPIF value in one jitter test is not in the range hpnicfNqaReactThresholdLowerLimit through hpnicfNqaReactThresholdUpperLimit. This notification is valid only when hpnicfNqaReactActionType is 'trapOnly' or 'trapAndTrigger', pingCtlType of the test is hpnicfNqajitter and hpnicfNqaCtlCodecType is 'g711Alaw' or 'g711Ulaw' or 'g729A'.
.1.3.6.1.4.1.11.2.14.11.15.8.3.3.8,HPN-ICF-NQA-MIB::hpnicfNqaMOSOverThreshold,,,,,,It is generated when the value of hpnicfNqaReactCurrentStatus changes. The change may occur when the watched condition is over threshold or below threshold. The over threshold situations is specified as below. 1. When the MOS value in one jitter test is not in the range hpnicfNqaReactThresholdLowerLimit through hpnicfNqaReactThresholdUpperLimit. This notification is valid only when hpnicfNqaReactActionType is 'trapOnly' or 'trapAndTrigger', pingCtlType of the test is hpnicfNqajitter and hpnicfNqaCtlCodecType is 'g711Alaw' or 'g711Ulaw' or 'g729A'.
.1.3.6.1.4.1.11.2.14.11.15.8.4,HPN-ICF-OID-MIB::hpnicfrmonExtend,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.8.4.0,HPN-ICF-RMON-EXT-MIB::hpnicfrmonExtendEventsV2,,,,,,Definition point for pri RMON notifications.
.1.3.6.1.4.1.11.2.14.11.15.8.4.0.1,HPN-ICF-RMON-EXT-MIB::hpnicfpririsingAlarm,,,,,,The SNMP trap that is generated when an alarm entry crosses its rising threshold and generates an event that is configured for sending SNMP traps.
.1.3.6.1.4.1.11.2.14.11.15.8.4.0.2,HPN-ICF-RMON-EXT-MIB::hpnicfprifallingAlarm,,,,,,The SNMP trap that is generated when an alarm entry crosses its falling threshold and generates an event that is configured for sending SNMP traps.
.1.3.6.1.4.1.11.2.14.11.15.8.4.4,HPN-ICF-RMON-EXT-MIB::hpnicfperformance,,,,,, 
.1.3.6.1.4.1.11.2.14.11.15.8.4.4.1,HPN-ICF-RMON-EXT-MIB::hpnicfprialarmTable,,not-accessible,,current,,A list of alarm entries.
.1.3.6.1.4.1.11.2.14.11.15.8.4.4.1.1,HPN-ICF-RMON-EXT-MIB::hpnicfprialarmEntry,,not-accessible,hpnicfprialarmIndex,current,,A list of parameters that set up a periodic checking for alarm conditions. For example, an instance of the alarmValue object might be named alarmValue.8
.1.3.6.1.4.1.11.2.14.11.15.8.4.4.1.1.1,HPN-ICF-RMON-EXT-MIB::hpnicfprialarmIndex,INTEGER,read-only,,current,,An index that uniquely identifies an entry in the alarm table. Each such entry defines a diagnostic sample at a particular interval for an object on the device.
.1.3.6.1.4.1.11.2.14.11.15.8.4.4.1.1.2,HPN-ICF-RMON-EXT-MIB::hpnicfprialarmInterval,INTEGER,read-write,,current,,The interval in seconds over which the data is sampled and compared with the rising and falling thresholds. When setting this variable, care should be taken in the case of deltaValue sampling - the interval should be set short enough that the sampled variable is very unlikely to increase or decrease by more than 2^31 - 1 during a single sampling interval. This object may not be modified if the associated alarmStatus object is equal to valid(1).
.1.3.6.1.4.1.11.2.14.11.15.8.4.4.1.1.3,HPN-ICF-RMON-EXT-MIB::hpnicfprialarmVariable,OCTET,read-write,,current,,The object identifier of the particular variable to be sampled. Only variables that resolve to an ASN.1 primitive type of INTEGER (INTEGER, Integer32, Counter32, Counter64, Gauge, or TimeTicks) may be sampled. Because SNMP access control is articulated entirely in terms of the contents of MIB views, no access control mechanism exists that can restrict the value of this object to identify only those objects that exist in a particular MIB view. Because there is thus no acceptable means of restricting the read access that could be obtained through the alarm mechanism, the probe must only grant write access to this object in those views that have read access to all objects on the probe. During a set operation, if the supplied variable name is not available in the selected MIB view, a badValue error must be returned. If at any time the variable name of an established alarmEntry is no longer available in the selected MIB view, the probe must change the status of this alarmEntry to invalid(4). This object may not be modified if the associated alarmStatus object is equal to valid(1).
.1.3.6.1.4.1.11.2.14.11.15.8.4.4.1.1.4,HPN-ICF-RMON-EXT-MIB::hpnicfprialarmSympol,OCTET,read-write,,current,,
.1.3.6.1.4.1.11.2.14.11.15.8.4.4.1.1.5,HPN-ICF-RMON-EXT-MIB::hpnicfprialarmSampleType,INTEGER,read-write,,current,absoluteValue(1):deltaValue(2):speedValue(3),The method of sampling the selected variable and calculating the value to be compared against the thresholds. If the value of this object is absoluteValue(1), the value of the selected variable will be compared directly with the thresholds at the end of the sampling interval. If the value of this object is deltaValue(2), the value of the selected variable at the last sample will be subtracted from the current value, and the difference compared with the thresholds. This object may not be modified if the associated alarmStatus object is equal to valid(1).
.1.3.6.1.4.1.11.2.14.11.15.8.4.4.1.1.6,HPN-ICF-RMON-EXT-MIB::hpnicfprialarmValue,INTEGER,read-only,,current,,The value of the statistic during the last sampling period. For example, if the sample type is deltaValue, this value will be the difference between the samples at the beginning and end of the period. If the sample type is absoluteValue, this value will be the sampled value at the end of the period. This is the value that is compared with the rising and falling thresholds. The value during the current sampling period is not made available until the period is completed and will remain available until the next period completes.
.1.3.6.1.4.1.11.2.14.11.15.8.4.4.1.1.7,HPN-ICF-RMON-EXT-MIB::hpnicfprialarmStartupAlarm,INTEGER,read-write,,current,risingAlarm(1):fallingAlarm(2):risingOrFallingAlarm(3),The alarm that may be sent when this entry is first set to valid. If the first sample after this entry becomes valid is greater than or equal to the risingThreshold and alarmStartupAlarm is equal to risingAlarm(1) or risingOrFallingAlarm(3), then a single rising alarm will be generated. If the first sample after this entry becomes valid is less than or equal to the fallingThreshold and alarmStartupAlarm is equal to fallingAlarm(2) or risingOrFallingAlarm(3), then a single falling alarm will be generated. This object may not be modified if the associated alarmStatus object is equal to valid(1).
.1.3.6.1.4.1.11.2.14.11.15.8.4.4.1.1.8,HPN-ICF-RMON-EXT-MIB::hpnicfprialarmRisingThreshold,INTEGER,read-write,,current,,A threshold for the sampled statistic. When the current sampled value is greater than or equal to this threshold, and the value at the last sampling interval was less than this threshold, a single event will be generated. A single event will also be generated if the first sample after this entry becomes valid is greater than or equal to this threshold and the associated alarmStartupAlarm is equal to risingAlarm(1) or risingOrFallingAlarm(3). After a rising event is generated, another such event will not be generated until the sampled value falls below this threshold and reaches the alarmFallingThreshold. This object may not be modified if the associated alarmStatus object is equal to valid(1).
.1.3.6.1.4.1.11.2.14.11.15.8.4.4.1.1.9,HPN-ICF-RMON-EXT-MIB::hpnicfprialarmFallingThreshold,INTEGER,read-write,,current,,A threshold for the sampled statistic. When the current sampled value is less than or equal to this threshold, and the value at the last sampling interval was greater than this threshold, a single event will be generated. A single event will also be generated if the first sample after this entry becomes valid is less than or equal to this threshold and the associated alarmStartupAlarm is equal to fallingAlarm(2) or risingOrFallingAlarm(3). After a falling event is generated, another such event will not be generated until the sampled value rises above this threshold and reaches the alarmRisingThreshold. This object may not be modified if the associated alarmStatus object is equal to valid(1).
.1.3.6.1.4.1.11.2.14.11.15.8.4.4.1.1.10,HPN-ICF-RMON-EXT-MIB::hpnicfprialarmRisingEventIndex,INTEGER,read-write,,current,,The index of the eventEntry that is used when a rising threshold is crossed. The eventEntry identified by a particular value of this index is the same as identified by the same value of the eventIndex object. If there is no corresponding entry in the eventTable, then no association exists. In particular, if this value is zero, no associated event will be generated, as zero is not a valid event index. This object may not be modified if the associated alarmStatus object is equal to valid(1).
.1.3.6.1.4.1.11.2.14.11.15.8.4.4.1.1.11,HPN-ICF-RMON-EXT-MIB::hpnicfprialarmFallingEventIndex,INTEGER,read-write,,current,,The index of the eventEntry that is used when a falling threshold is crossed. The eventEntry identified by a particular value of this index is the same as identified by the same value of the eventIndex object. If there is no corresponding entry in the eventTable, then no association exists. In particular, if this value is zero, no associated event will be generated, as zero is not a valid event index. This object may not be modified if the associated alarmStatus object is equal to valid(1).
.1.3.6.1.4.1.11.2.14.11.15.8.4.4.1.1.12,HPN-ICF-RMON-EXT-MIB::hpnicfprialarmStatCycle,INTEGER,read-write,,current,,
.1.3.6.1.4.1.11.2.14.11.15.8.4.4.1.1.13,HPN-ICF-RMON-EXT-MIB::hpnicfprialarmStatType,INTEGER,read-write,,current,forever(1):during(2),
.1.3.6.1.4.1.11.2.14.11.15.8.4.4.1.1.14,HPN-ICF-RMON-EXT-MIB::hpnicfprialarmOwner,OCTET,read-write,,current,,The entity that configured this entry and is therefore using the resources assigned to it.
.1.3.6.1.4.1.11.2.14.11.15.8.4.4.1.1.15,HPN-ICF-RMON-EXT-MIB::hpnicfprialarmStatus,INTEGER,read-write,,current,valid(1):createRequest(2):underCreation(3):invalid(4),The status of this alarm entry.
.1.3.6.1.4.1.11.2.14.11.15.8.4.5,HPN-ICF-RMON-EXT-MIB::hpnicfrmonEnableTable,,not-accessible,,current,,A list of enable rmon entries.
.1.3.6.1.4.1.11.2.14.11.15.8.4.5.1,HPN-ICF-RMON-EXT-MIB::hpnicfrmonEnableEntry,,not-accessible,hpnicfrmonEnableIfIndex,current,,A list of parameters that set up a hpnicfrmonEnableTable
.1.3.6.1.4.1.11.2.14.11.15.8.4.5.1.1,HPN-ICF-RMON-EXT-MIB::hpnicfrmonEnableIfIndex,INTEGER,read-only,,current,,Specify an interface to enable rmon.
.1.3.6.1.4.1.11.2.14.11.15.8.4.5.1.2,HPN-ICF-RMON-EXT-MIB::hpnicfrmonEnableStatus,INTEGER,read-write,,current,enable(1):disable(2),Specify an interface to enable rmon.
.1.3.6.1.4.1.11.2.14.11.15.8.4.6,HPN-ICF-RMON-EXT-MIB::hpnicfTrapDestTable,,not-accessible,,current,,Defines the trap destination Extend Table for providing, via SNMP, the capability of configure a trap dest.
.1.3.6.1.4.1.11.2.14.11.15.8.4.6.1,HPN-ICF-RMON-EXT-MIB::hpnicfTrapDestEntry,,not-accessible,,current,,Defines an entry in the hpnicfTrapDestTable.
.1.3.6.1.4.1.11.2.14.11.15.8.4.6.1.1,HPN-ICF-RMON-EXT-MIB::hpnicfTrapDestVersion,INTEGER,read-create,,current,snmpv1(1):snmpv2(2):snmpv3andauthen(3):snmpv3andnoauthen(4):snmpv3andpriv(5),The version for trap destination. This object may not be modified if the associated trapDestStatus object is equal to active(1).
.1.3.6.1.4.1.11.2.14.11.15.8.6,HPN-ICF-OID-MIB::hpnicfpaeExtMib,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.8.6.1,HPN-ICF-8021PAE-MIB::hpnicfpaeExtMibObjects,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.8.6.1.0,HPN-ICF-8021PAE-MIB::hpnicfdot1xPaeTraps,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.8.6.1.0.1,HPN-ICF-8021PAE-MIB::hpnicfsupplicantproxycheck,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.8.6.1.0.2,HPN-ICF-8021PAE-MIB::hpnicfproxycheckVlanId,INTEGER,accessible-for-notify,,current,,.
.1.3.6.1.4.1.11.2.14.11.15.8.6.1.0.3,HPN-ICF-8021PAE-MIB::hpnicfproxycheckPortName,OCTET,accessible-for-notify,,current,,.
.1.3.6.1.4.1.11.2.14.11.15.8.6.1.0.4,HPN-ICF-8021PAE-MIB::hpnicfproxycheckMacAddr,OCTET,accessible-for-notify,,current,,.
.1.3.6.1.4.1.11.2.14.11.15.8.6.1.0.5,HPN-ICF-8021PAE-MIB::hpnicfproxycheckIpaddr,IpAddress,accessible-for-notify,,current,,.
.1.3.6.1.4.1.11.2.14.11.15.8.6.1.0.6,HPN-ICF-8021PAE-MIB::hpnicfproxycheckUsrName,OCTET,accessible-for-notify,,current,,.
.1.3.6.1.4.1.11.2.14.11.15.8.6.1.1,HPN-ICF-8021PAE-MIB::hpnicfdot1xPaeSystem,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.8.6.1.1.1,HPN-ICF-8021PAE-MIB::hpnicfdot1xAuthQuietPeriod,Unsigned32,read-write,,current,,The value, in seconds, of the quietPeriod constant currently in use by the Authenticator PAE state machine.
.1.3.6.1.4.1.11.2.14.11.15.8.6.1.1.2,HPN-ICF-8021PAE-MIB::hpnicfdot1xAuthTxPeriod,Unsigned32,read-write,,current,,The value, in seconds, of the txPeriod constant currently in use by the Authenticator PAE state machine.
.1.3.6.1.4.1.11.2.14.11.15.8.6.1.1.3,HPN-ICF-8021PAE-MIB::hpnicfdot1xAuthSuppTimeout,Unsigned32,read-write,,current,,The value, in seconds, of the suppTimeout constant currently in use by the Backend Authentication state machine.
.1.3.6.1.4.1.11.2.14.11.15.8.6.1.1.4,HPN-ICF-8021PAE-MIB::hpnicfdot1xAuthServerTimeout,Unsigned32,read-write,,current,,The value, in seconds, of the serverTimeout constant currently in use by the Backend Authentication state machine.
.1.3.6.1.4.1.11.2.14.11.15.8.6.1.1.5,HPN-ICF-8021PAE-MIB::hpnicfdot1xAuthMaxReq,Unsigned32,read-write,,current,,The value of the maxReq constant currently in use by the Backend Authentication state machine.
.1.3.6.1.4.1.11.2.14.11.15.8.6.1.1.6,HPN-ICF-8021PAE-MIB::hpnicfdot1xAuthReAuthPeriod,Unsigned32,read-write,,current,,The value, in seconds, of the reAuthPeriod constant currently in use by the Reauthentication Timer state machine.
.1.3.6.1.4.1.11.2.14.11.15.8.6.1.1.7,HPN-ICF-8021PAE-MIB::hpnicfdot1xAuthMethod,INTEGER,read-write,,current,chap(1):pap(2):eap(3),The value defines the 802.1X authenticatin method.
.1.3.6.1.4.1.11.2.14.11.15.8.6.1.2,HPN-ICF-8021PAE-MIB::hpnicfdot1xPaeAuthenticator,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.8.6.1.2.1,HPN-ICF-8021PAE-MIB::hpnicfdot1xAuthConfigExtTable,,not-accessible,,current,, table extends dot1xAuthConfigTable
.1.3.6.1.4.1.11.2.14.11.15.8.6.1.2.1.1,HPN-ICF-8021PAE-MIB::hpnicfdot1xAuthConfigExtEntry,,not-accessible,dot1xPaePortNumber,current,, The configuration information for an Authenticator PAE.
.1.3.6.1.4.1.11.2.14.11.15.8.6.1.2.1.1.1,HPN-ICF-8021PAE-MIB::hpnicfdot1xpaeportAuthAdminStatus,INTEGER,read-write,,current,enabled(1):disabled(2),The administrative enable/disable state for Port Access Control in a port.
.1.3.6.1.4.1.11.2.14.11.15.8.6.1.2.1.1.2,HPN-ICF-8021PAE-MIB::hpnicfdot1xpaeportControlledType,INTEGER,read-write,,current,port(1):mac(2),Port Access Control type , base port access control or base MAC access control
.1.3.6.1.4.1.11.2.14.11.15.8.6.1.2.1.1.3,HPN-ICF-8021PAE-MIB::hpnicfdot1xpaeportMaxUserNum,INTEGER,read-write,,current,,the max num of online user in a port
.1.3.6.1.4.1.11.2.14.11.15.8.6.1.2.1.1.4,HPN-ICF-8021PAE-MIB::hpnicfdot1xpaeportUserNumNow,INTEGER,read-only,,current,,the num of online user in a port now 
.1.3.6.1.4.1.11.2.14.11.15.8.6.1.2.1.1.5,HPN-ICF-8021PAE-MIB::hpnicfdot1xpaeportClearStatistics,INTEGER,read-write,,current,clear(1),Clear various Statistics viz. 
.1.3.6.1.4.1.11.2.14.11.15.8.6.1.2.1.1.6,HPN-ICF-8021PAE-MIB::hpnicfdot1xpaeportMcastTrigStatus,INTEGER,read-write,,current,enabled(1):disabled(2),The administrative enable/disable state for sending muticast EAP_REQ/ID packet.
.1.3.6.1.4.1.11.2.14.11.15.8.6.1.2.1.1.7,HPN-ICF-8021PAE-MIB::hpnicfdot1xpaeportHandshakeStatus,INTEGER,read-write,,current,enabled(1):disabled(2),The administrative enable/disable state for sending handshake EAP_REQ/ID packet.
.1.3.6.1.4.1.11.2.14.11.15.8.7,HPN-ICF-OID-MIB::hpnicfHgmp,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.8.7.1,HPN-ICF-HGMP-MIB::hpnicfClusterObject,,,,,,This MIB contains objects to manage the cluster operations, which are used on lanswitch products.
.1.3.6.1.4.1.11.2.14.11.15.8.7.1.0,HPN-ICF-HGMP-MIB::hpnicfhgmpEventsV2,,,,,,Definition point for cluster notifications.
.1.3.6.1.4.1.11.2.14.11.15.8.7.1.0.1,HPN-ICF-HGMP-MIB::hpnicfhgmpMemberfailure,,,,,,When a cluster member failure, send a snmp trap to the network management.
.1.3.6.1.4.1.11.2.14.11.15.8.7.1.0.2,HPN-ICF-HGMP-MIB::hpnicfhgmpMemberRecover,,,,,,When a cluster member recover, send a snmp trap to the network management.
.1.3.6.1.4.1.11.2.14.11.15.8.7.1.0.3,HPN-ICF-HGMP-MIB::hpnicfhgmpMemberStatusChange,,,,,,When a cluster member status change, send a snmp trap to the network management.
.1.3.6.1.4.1.11.2.14.11.15.8.7.1.0.4,HPN-ICF-HGMP-MIB::hpnicfhgmpNetTopChange,,,,,,When net topology of this cluster change, send a snmp trap to the network management.
.1.3.6.1.4.1.11.2.14.11.15.8.7.1.1,HPN-ICF-HGMP-MIB::hpnicfhgmpSetVLANSecurity,INTEGER,read-write,,current,noSecurity(0):security(1),Configure whether to perform the VLAN check inside the cluster.
.1.3.6.1.4.1.11.2.14.11.15.8.7.1.2,HPN-ICF-HGMP-MIB::hpnicfhgmpHandShakeInterval,Integer32,read-write,,current,,Handshaking interval of the cluster member switches.
.1.3.6.1.4.1.11.2.14.11.15.8.7.1.3,HPN-ICF-HGMP-MIB::hpnicfhgmpHandShakeHoldtime,Integer32,read-write,,current,,Holdtime of administrator switch and member switch in the cluster.
.1.3.6.1.4.1.11.2.14.11.15.8.7.1.4,HPN-ICF-HGMP-MIB::hpnicfhgmpGrpMemberTableChange,Integer32,read-only,,current,,Add 1 to the member list after it changes. The administrator checks if the value has changed. If not, he will not read the list once more.
.1.3.6.1.4.1.11.2.14.11.15.8.7.1.5,HPN-ICF-HGMP-MIB::hpnicfhgmpMemberDisconRate,Integer32,read-only,,current,,Disconnection times of the member and administrator switches divided by member number times 1000.
.1.3.6.1.4.1.11.2.14.11.15.8.7.1.6,HPN-ICF-HGMP-MIB::hpnicfhgmpCmdLanswitchFlag,INTEGER,read-write,,current,false(0):true(1),Administrator switch flag
.1.3.6.1.4.1.11.2.14.11.15.8.7.1.7,HPN-ICF-HGMP-MIB::hpnicfhgmpCmdClusterName,OCTET,read-write,,current,,Cluster name of the administrator switch
.1.3.6.1.4.1.11.2.14.11.15.8.7.1.8,HPN-ICF-HGMP-MIB::hpnicfhgmpMngPriIpSegCMIP,IpAddress,read-write,,current,,The private management IP address of the administrator switch, which can not be modified after the cluster has been created.
.1.3.6.1.4.1.11.2.14.11.15.8.7.1.9,HPN-ICF-HGMP-MIB::hpnicfhgmpMngPriIpMask,IpAddress,read-write,,current,,The private management IP address mask assigned by the administrator switch, which cannot be modified after the cluster has been created.
.1.3.6.1.4.1.11.2.14.11.15.8.7.1.10,HPN-ICF-HGMP-MIB::hpnicfhgmpFtpServer,IpAddress,read-write,,current,,The cluster members can access the Ftp Server through the administrator switch, which can only be configured and accessed on the administrator switch.
.1.3.6.1.4.1.11.2.14.11.15.8.7.1.11,HPN-ICF-HGMP-MIB::hpnicfhgmpTftpServer,IpAddress,read-write,,current,,The cluster members can access the Tftp Server through the administrator switch, which can only be configured and accessed on the administrator switch.
.1.3.6.1.4.1.11.2.14.11.15.8.7.1.12,HPN-ICF-HGMP-MIB::hpnicfhgmpSnmpHost,IpAddress,read-write,,current,,The Snmp Host to send the cluster trap packets, which can only be configured and accessed on the administrator switch.
.1.3.6.1.4.1.11.2.14.11.15.8.7.1.13,HPN-ICF-HGMP-MIB::hpnicfhgmpLogHost,IpAddress,read-write,,current,,Log host of the cluster, which can only be configured and accessed on the administrator switch.
.1.3.6.1.4.1.11.2.14.11.15.8.7.1.14,HPN-ICF-HGMP-MIB::hpnicfhgmpGrpMemberTable,,not-accessible,,current,,Table of cluster member switches
.1.3.6.1.4.1.11.2.14.11.15.8.7.1.14.1,HPN-ICF-HGMP-MIB::hpnicfhgmpGrpMemberEntry,,not-accessible,hpnicfhgmpGrpMemberDeviceId,current,,
.1.3.6.1.4.1.11.2.14.11.15.8.7.1.14.1.1,HPN-ICF-HGMP-MIB::hpnicfhgmpGrpMemberDeviceId,OCTET,read-only,,current,,4 bytes reserved as 0x0 + 6 bytes of MAC address, expressed as  a character string of the hexadecimal number.
.1.3.6.1.4.1.11.2.14.11.15.8.7.1.14.1.2,HPN-ICF-HGMP-MIB::hpnicfhgmpGrpMemberSerial,Integer32,read-only,,current,,When adding member switch to the cluster, the administrator switch will assign an unique integer to identify it.
.1.3.6.1.4.1.11.2.14.11.15.8.7.1.14.1.3,HPN-ICF-HGMP-MIB::hpnicfhgmpGrpMemberIpAddr,IpAddress,read-only,,current,,The private IP addresses of the member switches for the communication inside the cluster.
.1.3.6.1.4.1.11.2.14.11.15.8.7.1.14.1.4,HPN-ICF-HGMP-MIB::hpnicfhgmpGrpMemberName,OCTET,read-only,,current,,Hostname of the member switch
.1.3.6.1.4.1.11.2.14.11.15.8.7.1.14.1.5,HPN-ICF-HGMP-MIB::hpnicfhgmpGrpMemberPassword,OCTET,read-write,,current,,Member password for joining a cluster
.1.3.6.1.4.1.11.2.14.11.15.8.7.1.14.1.6,HPN-ICF-HGMP-MIB::hpnicfhgmpGrpMemberPlatform,OCTET,read-only,,current,,Set the hardware platform. A null string indicates the information does not exist in the device adjacency table.
.1.3.6.1.4.1.11.2.14.11.15.8.7.1.14.1.7,HPN-ICF-HGMP-MIB::hpnicfhgmpGrpMemberStatus,INTEGER,read-only,,current,normal(0):fault(1),Member status on the administrator switch, use for displaying the network management status.
.1.3.6.1.4.1.11.2.14.11.15.8.7.1.14.1.8,HPN-ICF-HGMP-MIB::hpnicfhgmpGrpMemberDisconCount,Integer32,read-only,,current,,Count of inside communication disconnection between the member switch and the administrator switch.
.1.3.6.1.4.1.11.2.14.11.15.8.7.1.14.1.9,HPN-ICF-HGMP-MIB::hpnicfhgmpGrpMemberEnrollTime,Integer32,read-only,,current,,Enrollment time of the member, measured in seconds.
.1.3.6.1.4.1.11.2.14.11.15.8.7.1.14.1.10,HPN-ICF-HGMP-MIB::hpnicfhgmpGrpMemberOperate,INTEGER,read-write,,current,active(1):notInService(2):notReady(3):createAndGo(4):createAndWait(5):destroy(6),Operation indication field, indicates the operation of adding/removing a member by the network management agent.
.1.3.6.1.4.1.11.2.14.11.15.8.7.1.15,HPN-ICF-HGMP-MIB::hpnicfhgmpMemberResetTable,,not-accessible,,current,,Reset a member switch in the cluster.
.1.3.6.1.4.1.11.2.14.11.15.8.7.1.15.1,HPN-ICF-HGMP-MIB::hpnicfhgmpMemberResetEntry,,not-accessible,hpnicfhgmpMemberResetMAC,current,,
.1.3.6.1.4.1.11.2.14.11.15.8.7.1.15.1.1,HPN-ICF-HGMP-MIB::hpnicfhgmpMemberResetMAC,OCTET,read-only,,current,,The management MAC address of the switch to be reset, which is the unique identifier of the switch.
.1.3.6.1.4.1.11.2.14.11.15.8.7.1.15.1.2,HPN-ICF-HGMP-MIB::hpnicfhgmpMemberEraseflash,INTEGER,read-write,,current,noErase(0):erase(1):cannotget(65535),Whether to erase the configuration file from the flash after resetting the switch. Read this node, cannotget(65535) will be returned.
.1.3.6.1.4.1.11.2.14.11.15.8.7.1.16,HPN-ICF-HGMP-MIB::hpnicfhgmpClusterRole,INTEGER,read-only,,current,roleCMDSW(1):roleMEMBERSW(2):roleBAKSW(3):roleCASW(16):roleUNISW(17),This switch's role in cluster.
.1.3.6.1.4.1.11.2.14.11.15.8.7.1.17,HPN-ICF-HGMP-MIB::hpnicfhgmpClusterMaxPoolNum,INTEGER,read-only,,current,,Max switch members that the cluster can support(include administrator switch).
.1.3.6.1.4.1.11.2.14.11.15.8.7.1.18,HPN-ICF-HGMP-MIB::hpnicfhgmpClusterCmdSwMac,OCTET,read-only,,current,,The MAC address of administrator switch. It will be filled with zero when not be a member of cluster.
.1.3.6.1.4.1.11.2.14.11.15.8.7.1.19,HPN-ICF-HGMP-MIB::hpnicfhgmpRun,INTEGER,read-write,,current,false(0):true(1),Enable cluster on this switch.
.1.3.6.1.4.1.11.2.14.11.15.8.7.1.22,HPN-ICF-HGMP-MIB::hpnicfhgmpProtocolMac,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.8.7.1.22.1,HPN-ICF-HGMP-MIB::hpnicfhgmpClusterProtocolMac,OCTET,read-write,,current,,Protocol MAC of HGMP protocol family. All multicast packets of this protocol family use this MAC as destination MAC.
.1.3.6.1.4.1.11.2.14.11.15.8.7.1.23,HPN-ICF-HGMP-MIB::hpnicfhgmpTopologyManagement,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.8.7.1.23.1,HPN-ICF-HGMP-MIB::hpnicfhgmpWhitelistTable,,not-accessible,,current,,Cluster switches white list table. White list topology is the topology which has been affirmed by network administrator in a cluster, and all devices in white list topology are recorded in this table. Against to white list table, black list table records the devices which are denied to join in cluster. Adding a black list device to white list table will cause a failure.
.1.3.6.1.4.1.11.2.14.11.15.8.7.1.23.1.1,HPN-ICF-HGMP-MIB::hpnicfhgmpWhitelistEntry,,not-accessible,hpnicfhgmpWhitelistDeviceId,current,,Entry items
.1.3.6.1.4.1.11.2.14.11.15.8.7.1.23.1.1.1,HPN-ICF-HGMP-MIB::hpnicfhgmpWhitelistDeviceId,OCTET,not-accessible,,current,,Unique identifier indicating a white list switch. Value format of the this object is 'XXXXYYYYYY', in which 'XXXX' is reserved as 4 bytes of 0x0, 'YYYYYY' is a MAC address. For example, if the MAC is 000f-e459-000a, the value of this object is an octet string: '00' '00' '00' '00' '00' '0f' 'e4' '59' '00' '0a'.
.1.3.6.1.4.1.11.2.14.11.15.8.7.1.23.1.1.2,HPN-ICF-HGMP-MIB::hpnicfhgmpWhitelistSerial,Integer32,read-only,,current,,When adding member switch to the cluster, the administrator switch will assign an unique integer to identify it. 0xffff means invalid value for this object.
.1.3.6.1.4.1.11.2.14.11.15.8.7.1.23.1.1.3,HPN-ICF-HGMP-MIB::hpnicfhgmpWhitelistRowStatus,INTEGER,read-create,,current,active(1):notInService(2):notReady(3):createAndGo(4):createAndWait(5):destroy(6),The row status of this table.
.1.3.6.1.4.1.11.2.14.11.15.8.7.1.23.2,HPN-ICF-HGMP-MIB::hpnicfhgmpWhitelistNbTable,,not-accessible,,current,,Cluster switches white list neighboring information table. White list neighbor table records all neighbor devices for every white list device. In fact, white list neighbor table displays the whole white list topology.
.1.3.6.1.4.1.11.2.14.11.15.8.7.1.23.2.1,HPN-ICF-HGMP-MIB::hpnicfhgmpWhitelistNbEntry,,not-accessible,hpnicfhgmpWhitelistDeviceId:hpnicfhgmpWhitelistNbIndex,current,,Entry items
.1.3.6.1.4.1.11.2.14.11.15.8.7.1.23.2.1.1,HPN-ICF-HGMP-MIB::hpnicfhgmpWhitelistNbIndex,Integer32,not-accessible,,current,,Index of a switch which is the neighbor of a white list switch identified by 'hgmpWhitelistDeviceId'.
.1.3.6.1.4.1.11.2.14.11.15.8.7.1.23.2.1.2,HPN-ICF-HGMP-MIB::hpnicfhgmpWhitelistNbDeviceId,OCTET,read-only,,current,,Unique identifier indicating a neighbor switch of a white list switch. Value format of the this object is 'XXXXYYYYYY', in which 'XXXX' is reserved as 4 bytes of 0x0, 'YYYYYY' is a MAC address. For example, if the MAC is 000f-e459-000a, the value of this object is an octet string: '00' '00' '00' '00' '00' '0f' 'e4' '59' '00' '0a'.
.1.3.6.1.4.1.11.2.14.11.15.8.7.1.23.2.1.3,HPN-ICF-HGMP-MIB::hpnicfhgmpWhitelistPortName,OCTET,read-only,,current,,The name of the port which a white list switch connects to the neighbor specified by 'hgmpWhitelistNbIndex'.
.1.3.6.1.4.1.11.2.14.11.15.8.7.1.23.2.1.4,HPN-ICF-HGMP-MIB::hpnicfhgmpWhitelistNbPortName,OCTET,read-only,,current,,The name of the port which a neighbor device connects to the white list switch specified by 'hgmpWhitelistDeviceId'.
.1.3.6.1.4.1.11.2.14.11.15.8.7.1.23.3,HPN-ICF-HGMP-MIB::hpnicfhgmpBlacklistTable,,not-accessible,,current,,Cluster switches black list table. The black list table records all black list devices, and a device in black list is not permitted to join in any cluster.
.1.3.6.1.4.1.11.2.14.11.15.8.7.1.23.3.1,HPN-ICF-HGMP-MIB::hpnicfhgmpBlacklistEntry,,not-accessible,hpnicfhgmpBlacklistDeviceId,current,,Entry items
.1.3.6.1.4.1.11.2.14.11.15.8.7.1.23.3.1.1,HPN-ICF-HGMP-MIB::hpnicfhgmpBlacklistDeviceId,OCTET,not-accessible,,current,,Unique identifier indicating a black list switch. Value format of the this object is 'XXXXYYYYYY', in which 'XXXX' is reserved as 4 bytes of 0x0, 'YYYYYY' is a MAC address. For example, if the MAC is 000f-e459-000a, the value of this object is an octet string: '00' '00' '00' '00' '00' '0f' 'e4' '59' '00' '0a'.
.1.3.6.1.4.1.11.2.14.11.15.8.7.1.23.3.1.2,HPN-ICF-HGMP-MIB::hpnicfhgmpBlacklistAccessDeviceId,OCTET,read-only,,current,,Unique identifier indicating the access device of a black list switch. Tracing from a black list device to the cluster commander switch, the device which the black list switch directly connects to is the access device. Value format of the this object is 'XXXXYYYYYY', in which 'XXXX' is reserved as 4 bytes of 0x0, 'YYYYYY' is a MAC address. 10 bytes of 0xff means invalid value for this object. For example, if the MAC is 000f-e459-000a, the value of this object is an octet string: '00' '00' '00' '00' '00' '0f' 'e4' '59' '00' '0a'.
.1.3.6.1.4.1.11.2.14.11.15.8.7.1.23.3.1.3,HPN-ICF-HGMP-MIB::hpnicfhgmpBlacklistAccessPortName,OCTET,read-only,,current,,The port which the access device connecting to the black list switch is named access port, the object returns the access port name. An empty string means invalid value for this object.
.1.3.6.1.4.1.11.2.14.11.15.8.7.1.23.3.1.4,HPN-ICF-HGMP-MIB::hpnicfhgmpBlacklistRowStatus,INTEGER,read-create,,current,active(1):notInService(2):notReady(3):createAndGo(4):createAndWait(5):destroy(6),The row status of this table.
.1.3.6.1.4.1.11.2.14.11.15.8.7.1.24,HPN-ICF-HGMP-MIB::hpnicfhgmpMemberPriPortTable,,not-accessible,,current,,This table contains port number for different network protocols on each member switch. The port number can be used to access a specified member switch with specified protocol and private IP address.
.1.3.6.1.4.1.11.2.14.11.15.8.7.1.24.1,HPN-ICF-HGMP-MIB::hpnicfhgmpMemberPriPortEntry,,not-accessible,hpnicfhgmpMemberDevId:hpnicfhgmpMemberPriPortProto,current,,Information about a specified member private port entry. The indexes of the entry are hpnicfhgmpGrpMemberDevId and hpnicfhgmpMemberPriPortProto, which indicate entries in the table.
.1.3.6.1.4.1.11.2.14.11.15.8.7.1.24.1.1,HPN-ICF-HGMP-MIB::hpnicfhgmpMemberDevId,OCTET,read-only,,current,,Unique identifier indicating the switch in cluster. Value format of the this object is 'XXXXYYYYYY', in which 'XXXX' is  is reserved as 4 bytes of 0x0, 'YYYYYY' is a MAC address.
.1.3.6.1.4.1.11.2.14.11.15.8.7.1.24.1.2,HPN-ICF-HGMP-MIB::hpnicfhgmpMemberPriPortProto,Unsigned32,not-accessible,,current,,The index of this table. Each instance value of this object corresponds to a different protocol.
.1.3.6.1.4.1.11.2.14.11.15.8.7.1.24.1.3,HPN-ICF-HGMP-MIB::hpnicfhgmpMemberPriPortProtoDescr,OCTET,read-only,,current,,It describes the hpnicfhgmpMemberPriPortProtocol object value. For example, it is 'SNMP' when hpnicfhgmpMemberPriPortProtocol value is 1.
.1.3.6.1.4.1.11.2.14.11.15.8.7.1.24.1.4,HPN-ICF-HGMP-MIB::hpnicfhgmpMemberPriPortNum,Unsigned32,read-only,,current,,The private port number of member switch, used by specified hpnicfhgmpMemberPriPortProto. By using the private IP address, specified protocol and port number, other devices outside cluster can access member switch. The private IP address can be acquired by reading hpnicfhgmpGrpMemberIpAddr.
.1.3.6.1.4.1.11.2.14.11.15.8.7.2,HPN-ICF-HGMP-MIB::hpnicfStackObject,,,,,,This MIB contains objects to manage the stack operations, which is used on lanswitch products.
.1.3.6.1.4.1.11.2.14.11.15.8.7.2.0,HPN-ICF-HGMP-MIB::hpnicfhgmpStackEventsV2,,,,,,Definition point for Stack notifications.
.1.3.6.1.4.1.11.2.14.11.15.8.7.2.0.1,HPN-ICF-HGMP-MIB::hpnicfhgmpStackMemberfailure,,,,,,When a stack member failure, send a snmp trap to the network management.
.1.3.6.1.4.1.11.2.14.11.15.8.7.2.0.2,HPN-ICF-HGMP-MIB::hpnicfhgmpStackMemberRecover,,,,,,When a stack member Recover, send a snmp trap to the network management.
.1.3.6.1.4.1.11.2.14.11.15.8.7.2.0.3,HPN-ICF-HGMP-MIB::hpnicfhgmpStackMemberStatusChange,,,,,,When a stack member status change, send a snmp trap to the network management.
.1.3.6.1.4.1.11.2.14.11.15.8.7.2.1,HPN-ICF-HGMP-MIB::hpnicfhgmpStackMemberTableChange,Integer32,read-only,,current,,Change identifier of the stack member table.
.1.3.6.1.4.1.11.2.14.11.15.8.7.2.2,HPN-ICF-HGMP-MIB::hpnicfhgmpStackMemberDisconRate,Integer32,read-only,,current,,Disconnection rate of the stack member switches.
.1.3.6.1.4.1.11.2.14.11.15.8.7.2.3,HPN-ICF-HGMP-MIB::hpnicfhgmpMainLanswitchFlag,INTEGER,read-write,,current,false(0):true(1),The status of the local switch in the stack.
.1.3.6.1.4.1.11.2.14.11.15.8.7.2.4,HPN-ICF-HGMP-MIB::hpnicfhgmpStackIpPoolStartIP,IpAddress,read-write,,current,,The first address of the management IP network segment assigned by the master switch, which cannot be modified in the case that there is IP address assignment.
.1.3.6.1.4.1.11.2.14.11.15.8.7.2.5,HPN-ICF-HGMP-MIB::hpnicfhgmpStackIpPoolLength,INTEGER,read-write,,current,,The length of the management IP segment assigned by the master switch, which cannot be modified in the case that there is IP address assignment.
.1.3.6.1.4.1.11.2.14.11.15.8.7.2.6,HPN-ICF-HGMP-MIB::hpnicfhgmpStackMemberTable,,not-accessible,,current,,Stack member table.
.1.3.6.1.4.1.11.2.14.11.15.8.7.2.6.1,HPN-ICF-HGMP-MIB::hpnicfhgmpStackMemberEntry,,not-accessible,hpnicfhgmpStackMemberDeviceId,current,,
.1.3.6.1.4.1.11.2.14.11.15.8.7.2.6.1.1,HPN-ICF-HGMP-MIB::hpnicfhgmpStackMemberDeviceId,OCTET,read-only,,current,,2 bytes address type of the switch + 2 bytes zero + MAC address, expressed as a hexadecimal number string.
.1.3.6.1.4.1.11.2.14.11.15.8.7.2.6.1.2,HPN-ICF-HGMP-MIB::hpnicfhgmpStackMemberSerial,Integer32,read-only,,current,,When adding a member switch to the stack, the master switch will assign an unique integer to identify it.
.1.3.6.1.4.1.11.2.14.11.15.8.7.2.6.1.3,HPN-ICF-HGMP-MIB::hpnicfhgmpStackMemberIpAddr,IpAddress,read-only,,current,,The private member IP address for the communication inside the stack.
.1.3.6.1.4.1.11.2.14.11.15.8.7.2.6.1.4,HPN-ICF-HGMP-MIB::hpnicfhgmpStackMemberName,OCTET,read-only,,current,,Hostname of the member switch.
.1.3.6.1.4.1.11.2.14.11.15.8.7.2.6.1.5,HPN-ICF-HGMP-MIB::hpnicfhgmpStackMemberPassword,OCTET,read-only,,current,,Member password for joining a stack.
.1.3.6.1.4.1.11.2.14.11.15.8.7.2.6.1.6,HPN-ICF-HGMP-MIB::hpnicfhgmpStackMemberPlatform,OCTET,read-only,,current,,Set the hardware platform. A null string indicates the information does not exist in the device adjacency table.
.1.3.6.1.4.1.11.2.14.11.15.8.7.2.6.1.7,HPN-ICF-HGMP-MIB::hpnicfhgmpStackMemberStatus,INTEGER,read-only,,current,normal(0):fault(1),Member status on the master switch, use for displaying the network management status.
.1.3.6.1.4.1.11.2.14.11.15.8.7.2.6.1.8,HPN-ICF-HGMP-MIB::hpnicfhgmpStackMemberDisconCount,Integer32,read-only,,current,,Count of inside communication disconnection between the member switch and the master switch.
.1.3.6.1.4.1.11.2.14.11.15.8.7.2.6.1.9,HPN-ICF-HGMP-MIB::hpnicfhgmpStackMemberEnrollTime,Integer32,read-only,,current,,Enrollment time of the member, measured in seconds.
.1.3.6.1.4.1.11.2.14.11.15.8.7.2.7,HPN-ICF-HGMP-MIB::hpnicfhgmpStackRole,INTEGER,read-only,,current,roleCMDSW(1):roleMEMBERSW(2):roleBAKSW(3):roleCASW(16):roleUNISW(17),This switch's role status in stack.
.1.3.6.1.4.1.11.2.14.11.15.8.7.2.8,HPN-ICF-HGMP-MIB::hpnicfhgmpStackMaxPoolNum,INTEGER,read-only,,current,,Max switch members in one stack that the switch support (include main switch).
.1.3.6.1.4.1.11.2.14.11.15.8.7.2.9,HPN-ICF-HGMP-MIB::hpnicfhgmpStackMainSwMac,OCTET,read-only,,current,,The MAC address of main switch. It will be 00.00.00 when not be a member of stack.
.1.3.6.1.4.1.11.2.14.11.15.8.7.2.10,HPN-ICF-HGMP-MIB::hpnicfhgmpStackIpPoolMask,IpAddress,read-write,,current,,The mask of the management IP segment assigned by the master switch, which cannot be modified in the case that there is IP address assignment.
.1.3.6.1.4.1.11.2.14.11.15.8.7.4,HPN-ICF-HGMP-MIB::hpnicfNTDPObject,,,,,,This MIB contains objects to manage the ntdp operations, which are used on lanswitch products.
.1.3.6.1.4.1.11.2.14.11.15.8.7.4.1,HPN-ICF-HGMP-MIB::hpnicfhgmpNTDPCollectTopTime,Integer32,read-write,,current,,Topology collection interval of the administrator switch of the cluster, measured in minutes.
.1.3.6.1.4.1.11.2.14.11.15.8.7.4.2,HPN-ICF-HGMP-MIB::hpnicfhgmpNTDPHopRange,Integer32,read-write,,current,,Range of the topology collection of the administrator switch
.1.3.6.1.4.1.11.2.14.11.15.8.7.4.3,HPN-ICF-HGMP-MIB::hpnicfhgmpNTDPRun,INTEGER,read-write,,current,false(0):true(1),Enable/Disable the NTDP function on the switch.
.1.3.6.1.4.1.11.2.14.11.15.8.7.4.4,HPN-ICF-HGMP-MIB::hpnicfhgmpNTDPPortDelay,Integer32,read-write,,current,,Set the delay to forward the topology request via the ports, measured in milliseconds.
.1.3.6.1.4.1.11.2.14.11.15.8.7.4.5,HPN-ICF-HGMP-MIB::hpnicfhgmpNTDPHopDelay,Integer32,read-write,,current,,Set the delay to forward the topology request from every hop, measured in milliseconds.
.1.3.6.1.4.1.11.2.14.11.15.8.7.4.6,HPN-ICF-HGMP-MIB::hpnicfhgmpNTDPLastTopCollectDuration,Integer32,read-only,,current,,Duration of the latest overall topology collection, a performance count measured in seconds.
.1.3.6.1.4.1.11.2.14.11.15.8.7.4.7,HPN-ICF-HGMP-MIB::hpnicfhgmpNTDPCacheChange,Integer32,read-only,,current,,Add 1 when the device table changes. The network administrator will check if it has changed before accessing the table. If it has not changed, he will not access again.
.1.3.6.1.4.1.11.2.14.11.15.8.7.4.8,HPN-ICF-HGMP-MIB::hpnicfhgmpNTDPTOPTableChange,Integer32,read-only,,current,,Add 1 when the topology table changes. The network administrator will check if it has changed before accessing the table. If it has not changed, he will not access again.
.1.3.6.1.4.1.11.2.14.11.15.8.7.4.9,HPN-ICF-HGMP-MIB::hpnicfhgmpNTDPInterfaceTable,,not-accessible,,current,,Enable/Disable the NTDP on the switch port.
.1.3.6.1.4.1.11.2.14.11.15.8.7.4.9.1,HPN-ICF-HGMP-MIB::hpnicfhgmpNTDPInterfaceEntry,,not-accessible,hpnicfhgmpNTDPInterfaceIfIndex,current,,
.1.3.6.1.4.1.11.2.14.11.15.8.7.4.9.1.1,HPN-ICF-HGMP-MIB::hpnicfhgmpNTDPInterfaceIfIndex,Integer32,read-only,,current,,Unique identifier an interface of the device.
.1.3.6.1.4.1.11.2.14.11.15.8.7.4.9.1.2,HPN-ICF-HGMP-MIB::hpnicfhgmpNTDPInterfaceEnable,INTEGER,read-write,,current,false(0):true(1),If it is true, the device will send and receive the NTDP packets via the interface. To disable the NTDP function on the interface, set the entry as false.
.1.3.6.1.4.1.11.2.14.11.15.8.7.4.10,HPN-ICF-HGMP-MIB::hpnicfhgmpNTDPCacheTable,,not-accessible,,current,,Access the information about the switch from the topology table.
.1.3.6.1.4.1.11.2.14.11.15.8.7.4.10.1,HPN-ICF-HGMP-MIB::hpnicfhgmpNTDPCacheEntry,,not-accessible,hpnicfhgmpNTDPCacheHashIndex:hpnicfhgmpNTDPCacheDeviceID,current,,
.1.3.6.1.4.1.11.2.14.11.15.8.7.4.10.1.1,HPN-ICF-HGMP-MIB::hpnicfhgmpNTDPCacheHashIndex,Integer32,read-only,,current,,Our NTDP information is saved in the HASH table on the administrator switch. Using DeviceID as index will lead to the comparison of a large amount of character strings, which puts too many burdens on the administrator switch. A HAHSIndex is added to reduce the character string comparison to the least range.
.1.3.6.1.4.1.11.2.14.11.15.8.7.4.10.1.2,HPN-ICF-HGMP-MIB::hpnicfhgmpNTDPCacheDeviceID,OCTET,read-only,,current,,2 bytes address type of the member switch + 2 bytes zero + MAC address, expressed as a character string of the hexadecimal number.
.1.3.6.1.4.1.11.2.14.11.15.8.7.4.10.1.3,HPN-ICF-HGMP-MIB::hpnicfhgmpNTDPCacheClusterName,OCTET,read-only,,current,,Name of the cluster including the device.
.1.3.6.1.4.1.11.2.14.11.15.8.7.4.10.1.4,HPN-ICF-HGMP-MIB::hpnicfhgmpNTDPCacheClusterRole,INTEGER,read-only,,current,roleCOSW(1):roleMSW(2):roleBKSW(3):roleCASW(16):roleUNISW(17),Cluster role of the current device, which can be a administrator switch (0x01), member switch(0x02), backup switch(0x03), candidate switch(0x10) or an independent switch (incapable of cluster member) (0x11).
.1.3.6.1.4.1.11.2.14.11.15.8.7.4.10.1.5,HPN-ICF-HGMP-MIB::hpnicfhgmpNTDPCacheCapabilities,INTEGER,read-only,,current,,The capabilities of the device. FF indicates that the field was not included in in the latest NTDP packet.
.1.3.6.1.4.1.11.2.14.11.15.8.7.4.10.1.6,HPN-ICF-HGMP-MIB::hpnicfhgmpNTDPCacheVersion,OCTET,read-only,,current,,The version information of the corresponding device. A null string indicates that the field was not included in in the latest NTDP packet.
.1.3.6.1.4.1.11.2.14.11.15.8.7.4.10.1.7,HPN-ICF-HGMP-MIB::hpnicfhgmpNTDPCachePlatform,OCTET,read-only,,current,,Hardware platform. A null string indicates that the field was not included in the latest NTDP packet.
.1.3.6.1.4.1.11.2.14.11.15.8.7.4.10.1.8,HPN-ICF-HGMP-MIB::hpnicfhgmpNTDPCacheMngVLAN,INTEGER,read-only,,current,,The management VLAN ID of the device.
.1.3.6.1.4.1.11.2.14.11.15.8.7.4.10.1.9,HPN-ICF-HGMP-MIB::hpnicfhgmpNTDPCacheHop,INTEGER,read-only,,current,,Hops to this switch.
.1.3.6.1.4.1.11.2.14.11.15.8.7.4.11,HPN-ICF-HGMP-MIB::hpnicfhgmpNTDPTopTable,,not-accessible,,current,,Access the topology structure collected by the NTDP.
.1.3.6.1.4.1.11.2.14.11.15.8.7.4.11.1,HPN-ICF-HGMP-MIB::hpnicfhgmpNTDPTopEntry,,not-accessible,hpnicfhgmpNTDPTopHashIndex:hpnicfhgmpNTDPTopEdgeStartDevID:hpnicfhgmpNTDPTopEdgeIndex,current,,
.1.3.6.1.4.1.11.2.14.11.15.8.7.4.11.1.1,HPN-ICF-HGMP-MIB::hpnicfhgmpNTDPTopHashIndex,Integer32,read-only,,current,,Our NTDP information is saved in the HASH table on the administrator switch. Using DeviceID as index will lead to the comparison of a large amount of character strings, which puts too many burdens on the administrator switch. A HAHSIndex is added to reduce the character string comparison to the least range.
.1.3.6.1.4.1.11.2.14.11.15.8.7.4.11.1.2,HPN-ICF-HGMP-MIB::hpnicfhgmpNTDPTopEdgeStartDevID,OCTET,read-only,,current,,2 bytes address type of the member switch + 2 bytes zero + MAC address, expressed as a character string of the hexadecimal number.
.1.3.6.1.4.1.11.2.14.11.15.8.7.4.11.1.3,HPN-ICF-HGMP-MIB::hpnicfhgmpNTDPTopEdgeIndex,Integer32,read-only,,current,,Edge index of this entry in the data structure.
.1.3.6.1.4.1.11.2.14.11.15.8.7.4.11.1.4,HPN-ICF-HGMP-MIB::hpnicfhgmpNTDPTopEdgeEndDevID,OCTET,read-only,,current,,2 bytes address type of the member switch + 2 bytes zero + MAC address, expressed as a character string of the hexadecimal number.
.1.3.6.1.4.1.11.2.14.11.15.8.7.4.11.1.5,HPN-ICF-HGMP-MIB::hpnicfhgmpNTDPTopEdgeStartPort,OCTET,read-only,,current,,The number of the first port of a topology edge. Interface type + card number / slot number / sequence number.
.1.3.6.1.4.1.11.2.14.11.15.8.7.4.11.1.6,HPN-ICF-HGMP-MIB::hpnicfhgmpNTDPTopEdgeStartPortFullDuplex,INTEGER,read-only,,current,half(0):full(1),The full-duplex status of the first port on a topology edge.
.1.3.6.1.4.1.11.2.14.11.15.8.7.4.11.1.7,HPN-ICF-HGMP-MIB::hpnicfhgmpNTDPTopEdgeStartPortSpeed,Integer32,read-only,,current,,The speed of the first port on a topology edge.
.1.3.6.1.4.1.11.2.14.11.15.8.7.4.11.1.8,HPN-ICF-HGMP-MIB::hpnicfhgmpNTDPTopEdgeEndPort,OCTET,read-only,,current,,The number of the last port of a topology edge. Interface type + card number / slot number / sequence number.
.1.3.6.1.4.1.11.2.14.11.15.8.7.4.11.1.11,HPN-ICF-HGMP-MIB::hpnicfhgmpNTDPTopLinkStatus,INTEGER,read-only,,current,forwarding(1):blocking(2),In STP or RSTP, it describes link status according to port STP steady status. In MSTP it describes STP steady status of the instance which management VLAN belongs to. Either 'hgmpNTDPTopEdgeStartPort' or 'hgmpNTDPTopEdgeEndPort' STP steady status is 'blocking', this object is 'blocking', otherwise is 'forwarding'. If STP or MSTP is disabled, this object is 'forwarding'.
.1.3.6.1.4.1.11.2.14.11.15.8.7.5,HPN-ICF-HGMP-MIB::hpnicfNDPObject,,,,,,This MIB contains objects to manage the ndp operations, which are used on lanswitch products.
.1.3.6.1.4.1.11.2.14.11.15.8.7.5.1,HPN-ICF-HGMP-MIB::hpnicfNDPStatus,INTEGER,read-write,,current,disable(0):enable(1),NDP protocol module enable flag
.1.3.6.1.4.1.11.2.14.11.15.8.7.5.2,HPN-ICF-HGMP-MIB::hpnicfNDPHelloTimer,Integer32,read-write,,current,,NDP packet transmission interval, measured in seconds.
.1.3.6.1.4.1.11.2.14.11.15.8.7.5.3,HPN-ICF-HGMP-MIB::hpnicfNDPAgingTime,Integer32,read-write,,current,,How long the NDP information of the local switch can be hold in the adjacent switch, measured in seconds.
.1.3.6.1.4.1.11.2.14.11.15.8.7.5.4,HPN-ICF-HGMP-MIB::hpnicfNDPChange,Counter32,read-only,,current,,Change identifier of the Neighbor table
.1.3.6.1.4.1.11.2.14.11.15.8.7.5.5,HPN-ICF-HGMP-MIB::hpnicfNDPPortTable,,not-accessible,,current,,Configure to enable/disable the interface NDP of the switch.
.1.3.6.1.4.1.11.2.14.11.15.8.7.5.5.1,HPN-ICF-HGMP-MIB::hpnicfNDPPortEntry,,not-accessible,hpnicfNDPIfIndex,current,,
.1.3.6.1.4.1.11.2.14.11.15.8.7.5.5.1.1,HPN-ICF-HGMP-MIB::hpnicfNDPIfIndex,Integer32,read-only,,current,,Unique identifier of an interface of the device.
.1.3.6.1.4.1.11.2.14.11.15.8.7.5.5.1.2,HPN-ICF-HGMP-MIB::hpnicfNDPPortStatus,INTEGER,read-write,,current,disable(0):enable(1),If it is enable, the device will send and receive the NDP packets via the interface. To disable the NDP function on the interface, set the entry as false.
.1.3.6.1.4.1.11.2.14.11.15.8.7.5.6,HPN-ICF-HGMP-MIB::hpnicfNDPPortNbTable,,not-accessible,,current,,NDP neighbor information on the switch.
.1.3.6.1.4.1.11.2.14.11.15.8.7.5.6.1,HPN-ICF-HGMP-MIB::hpnicfNDPPortNbEntry,,not-accessible,hpnicfNDPIfIndex:hpnicfNDPPortNbDeviceId:hpnicfNDPPortNbPortName,current,,
.1.3.6.1.4.1.11.2.14.11.15.8.7.5.6.1.1,HPN-ICF-HGMP-MIB::hpnicfNDPPortNbDeviceId,OCTET,read-only,,current,,2 bytes address type of the member switch + 2 bytes zero + MAC address, expressed as a character string of the hexadecimal number.
.1.3.6.1.4.1.11.2.14.11.15.8.7.5.6.1.2,HPN-ICF-HGMP-MIB::hpnicfNDPPortNbPortName,OCTET,read-only,,current,,Unique identifier of a port. A null string indicates that the field was not included in in the latest NDP packet. Interface type + card number / slot number / sequence number.
.1.3.6.1.4.1.11.2.14.11.15.8.7.5.6.1.3,HPN-ICF-HGMP-MIB::hpnicfNDPPortNbDeviceName,OCTET,read-only,,current,,Device name. A null string indicates that the field was not included in the latest NDP packet.
.1.3.6.1.4.1.11.2.14.11.15.8.7.5.6.1.4,HPN-ICF-HGMP-MIB::hpnicfNDPPortNbPortMode,INTEGER,read-only,,current,full(1):half(2):auto(3),The neighbor port duplex mode.
.1.3.6.1.4.1.11.2.14.11.15.8.7.5.6.1.5,HPN-ICF-HGMP-MIB::hpnicfNDPPortNbProductVer,OCTET,read-only,,current,,Product version. A null string indicates that the field was not included in the latest NDP packet.
.1.3.6.1.4.1.11.2.14.11.15.8.7.5.6.1.6,HPN-ICF-HGMP-MIB::hpnicfNDPPortNbHardVer,OCTET,read-only,,current,,Hardware version. A null string indicates that the field was not included in the latest NDP packet.
.1.3.6.1.4.1.11.2.14.11.15.8.7.5.6.1.7,HPN-ICF-HGMP-MIB::hpnicfNDPPortNbBootromVer,OCTET,read-only,,current,,Bootrom version. A null string indicates that the field was not included in the latest NDP packet.
.1.3.6.1.4.1.11.2.14.11.15.8.7.5.6.1.8,HPN-ICF-HGMP-MIB::hpnicfNDPPortNbSoftVer,OCTET,read-only,,current,,Software version. A null string indicates that the field was not included in the latest NDP packet.
.1.3.6.1.4.1.11.2.14.11.15.8.7.5.6.1.9,HPN-ICF-HGMP-MIB::hpnicfNDPPortNbAgingtime,Integer32,read-only,,current,,How long the NDP information of the local switch can be hold in the adjacent switch, measured in seconds.
.1.3.6.1.4.1.11.2.14.11.15.8.8,HPN-ICF-OID-MIB::hpnicfDevice,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.8.8.1,HPN-ICF-LswDEVM-MIB::hpnicfCpuTable,,not-accessible,,current,,A table of CPU statistics.
.1.3.6.1.4.1.11.2.14.11.15.8.8.1.1,HPN-ICF-LswDEVM-MIB::hpnicfCpuEntry,,not-accessible,hpnicfCpuIndex,current,,The Entries of hpnicfCpuTable.
.1.3.6.1.4.1.11.2.14.11.15.8.8.1.1.1,HPN-ICF-LswDEVM-MIB::hpnicfCpuIndex,INTEGER,not-accessible,,current,,Index of hpnicfCpuTable. This integer is a uniq number to identify the CPU(s). We recommand two Number Plans in this paper, Logical Number or Phisical Number. For the first case, hpnicfCpuIndex is a integer, range from 1 to the Maximum number, for example 1,2,3,4,5 ..., where 1 represents the first CPU, 2 represents the second CPU, etc. For the second case hpnicfCpuIndex represents physical card position (Shelf Number, Frame Number, Slot Number, SubSlotNumber) where the CPU residing, for example, 0x01020304 represent the CPU on the 4th subslot of the 3th slot of the 2nd frame of the 1st Shelf. In the condition of multiple CPU system where CPU group coordinately process on one board, we see the CPUs as one CPU
.1.3.6.1.4.1.11.2.14.11.15.8.8.1.1.2,HPN-ICF-LswDEVM-MIB::hpnicfCpuCostRate,Gauge32,read-only,,current,,The overall CPU busy percentage in the last 5 second period. 
.1.3.6.1.4.1.11.2.14.11.15.8.8.1.1.3,HPN-ICF-LswDEVM-MIB::hpnicfCpuCostRatePer1Min,Gauge32,read-only,,current,,The overall CPU cost percentage in the last 1 minute period. 
.1.3.6.1.4.1.11.2.14.11.15.8.8.1.1.4,HPN-ICF-LswDEVM-MIB::hpnicfCpuCostRatePer5Min,Gauge32,read-only,,current,,The overall CPU cost percentage in the last 5 minutes period. 
.1.3.6.1.4.1.11.2.14.11.15.8.8.2,HPN-ICF-LswDEVM-MIB::hpnicfMem,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.8.8.2.1,HPN-ICF-LswDEVM-MIB::hpnicfMemTable,,not-accessible,,current,,This table contains memory information. 
.1.3.6.1.4.1.11.2.14.11.15.8.8.2.1.1,HPN-ICF-LswDEVM-MIB::hpnicfMemEntry,,not-accessible,hpnicfMemModuleIndex,current,,The Entries of hpnicfMemTable
.1.3.6.1.4.1.11.2.14.11.15.8.8.2.1.1.1,HPN-ICF-LswDEVM-MIB::hpnicfMemModuleIndex,INTEGER,not-accessible,,current,,Index of hpnicfMemTable. This integer is a uniq number to identify the memory module. We recommand two Number Plans in this paper, Logical Number or Phisical Number. For the first case, hpnicfMemModuleIndex is a integer, range from 1 to the Maximum number, for example 1,2,3,4,5 ..., where 1 represents the first memory module, 2 represents the second memory module, etc. For the second case hpnicfMemModuleIndex represents physical card position (Shelf Number, Frame Number, Slot Number, SubSlotNumber) where the memory module residing, for example, 0x01020304 represent the memory module on the 4th subslot of the 3th slot of the 2nd frame of the 1st Shelf. 
.1.3.6.1.4.1.11.2.14.11.15.8.8.2.1.1.2,HPN-ICF-LswDEVM-MIB::hpnicfMemSize,Gauge32,read-only,,current,,Indicates the total size of the memory module which is on the managed object.
.1.3.6.1.4.1.11.2.14.11.15.8.8.2.1.1.3,HPN-ICF-LswDEVM-MIB::hpnicfMemFree,Gauge32,read-only,,current,,Indicates the free size of the memory
.1.3.6.1.4.1.11.2.14.11.15.8.8.2.1.1.4,HPN-ICF-LswDEVM-MIB::hpnicfMemRawSliceUsed,Gauge32,read-only,,current,,Indicates the used size of the raw slice memory
.1.3.6.1.4.1.11.2.14.11.15.8.8.2.1.1.5,HPN-ICF-LswDEVM-MIB::hpnicfMemLgFree,Gauge32,read-only,,current,,The largest free size of the contiguous area in the memory. The unit is byte.
.1.3.6.1.4.1.11.2.14.11.15.8.8.2.1.1.6,HPN-ICF-LswDEVM-MIB::hpnicfMemFail,Gauge32,read-only,,current,,The times of memory allocation failures
.1.3.6.1.4.1.11.2.14.11.15.8.8.2.1.1.7,HPN-ICF-LswDEVM-MIB::hpnicfMemFailNoMem,Gauge32,read-only,,current,,The times of memory allocation failures due to no free memory.
.1.3.6.1.4.1.11.2.14.11.15.8.8.2.2,HPN-ICF-LswDEVM-MIB::hpnicfBufTable,,not-accessible,,current,,This table contains buffer information. 
.1.3.6.1.4.1.11.2.14.11.15.8.8.2.2.1,HPN-ICF-LswDEVM-MIB::hpnicfBufEntry,,not-accessible,hpnicfBufModuleIndex:hpnicfBufSize,current,,The Entries of hpnicfBufferTable
.1.3.6.1.4.1.11.2.14.11.15.8.8.2.2.1.1,HPN-ICF-LswDEVM-MIB::hpnicfBufModuleIndex,INTEGER,not-accessible,,current,,Index of hpnicfBufferTable. This integer is a uniq number to identify the buffer module. We recommand two Number Plans in this paper, Logical Number or Phisical Number. For the first case, hpnicfBufferModuleIndex is a integer, range from 1 to the Maximum number, for example 1,2,3,4,5 ..., where 1 represents the first buffer module, 2 represents the second buffer module, etc. For the second case hpnicfBufferModuleIndex represents physical card position (Shelf Number, Frame Number, Slot Number, SubSlotNumber) where the buffer module residing, for example, 0x01020304 represent the buffer module on the 4th subslot of the 3th slot of the 2nd frame of the 1st Shelf. 
.1.3.6.1.4.1.11.2.14.11.15.8.8.2.2.1.2,HPN-ICF-LswDEVM-MIB::hpnicfBufSize,INTEGER,not-accessible,,current,,The size of buffer,unit is byte.
.1.3.6.1.4.1.11.2.14.11.15.8.8.2.2.1.3,HPN-ICF-LswDEVM-MIB::hpnicfBufCurrentTotal,Gauge32,read-only,,current,,The total number of buffer currently.
.1.3.6.1.4.1.11.2.14.11.15.8.8.2.2.1.4,HPN-ICF-LswDEVM-MIB::hpnicfBufCurrentUsed,Gauge32,read-only,,current,,The number of used buffer currently.
.1.3.6.1.4.1.11.2.14.11.15.8.8.3,HPN-ICF-LswDEVM-MIB::hpnicfFlh,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.8.8.3.1,HPN-ICF-LswDEVM-MIB::hpnicfFlhTotalSize,INTEGER,read-only,,current,,The flash memory's total size, in kilobyte
.1.3.6.1.4.1.11.2.14.11.15.8.8.3.2,HPN-ICF-LswDEVM-MIB::hpnicfFlhTotalFree,INTEGER,read-only,,current,,The free space in internal flash memory, in kilobyte
.1.3.6.1.4.1.11.2.14.11.15.8.8.3.3,HPN-ICF-LswDEVM-MIB::hpnicfFlhLastDelTime,TimeTicks,read-only,,current,,The time since system up of the lastest deleting operation of flash memory.The value of Zero indicates there is no erasing operation since system up
.1.3.6.1.4.1.11.2.14.11.15.8.8.3.4,HPN-ICF-LswDEVM-MIB::hpnicfFlhDelState,INTEGER,read-only,,current,executing(1):ok(2):error(3):readOnly(4):failtoopen(5):blockMallocFail(6):noneDelOperationSinceStart(7),The state indicates the result of current or lastest flash memory deleting operation
.1.3.6.1.4.1.11.2.14.11.15.8.8.3.5,HPN-ICF-LswDEVM-MIB::hpnicfFlhState,INTEGER,read-only,,current,busy(1):free(2),Busy indicates the flash memory is unavailable due to others may be using it, and free indicates the flash memory is available now
.1.3.6.1.4.1.11.2.14.11.15.8.12,HPN-ICF-OID-MIB::hpnicfMpls,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.8.12.1,HPN-ICF-OID-MIB::hpnicfMplsLsr,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.8.12.1.1,HPN-ICF-MPLS-LSR-MIB::hpnicfmplsLsrObjects,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.8.12.1.1.1,HPN-ICF-MPLS-LSR-MIB::hpnicfmplsInterfaceConfTable,,not-accessible,,current,,This table specifies per-interface MPLS capability and associated information.
.1.3.6.1.4.1.11.2.14.11.15.8.12.1.1.1.1,HPN-ICF-MPLS-LSR-MIB::hpnicfmplsInterfaceConfEntry,,not-accessible,hpnicfmplsInterfaceConfIndex,current,,An entry in this table is created by an LSR for every interface capable of supporting MPLS. The entry with index 0 represents the per-platform label space and contains parameters that apply to all interfaces that participate in the per-platform label space. Other entries defined in this table represent additional MPLS interfaces that may participate in either the per-platform or per- interface label spaces, or both. Additional information about label space participation of an interface is provided in the description clause of hpnicfmplsInterfaceLabelParticipationType.
.1.3.6.1.4.1.11.2.14.11.15.8.12.1.1.1.1.1,HPN-ICF-MPLS-LSR-MIB::hpnicfmplsInterfaceConfIndex,Integer32,not-accessible,,current,,This is a unique index for an entry in the hpnicfmplsInterfaceConfTable. A non-zero index for an entry indicates the ifIndex for the corresponding interface entry in of the MPLS-layer in the ifTable. Note that the per-platform label space may apply to several interfaces, and therefore the configuration of the per-platform label space interface parameters will apply to all of the interfaces that are participating in the per-platform label space.
.1.3.6.1.4.1.11.2.14.11.15.8.12.1.1.1.1.2,HPN-ICF-MPLS-LSR-MIB::hpnicfmplsInterfaceLabelMinIn,Unsigned32,read-only,,current,,This is the minimum value of an MPLS label that this LSR is willing to receive on this interface.
.1.3.6.1.4.1.11.2.14.11.15.8.12.1.1.1.1.3,HPN-ICF-MPLS-LSR-MIB::hpnicfmplsInterfaceLabelMaxIn,Unsigned32,read-only,,current,,This is the maximum value of an MPLS label that this LSR is willing to receive on this interface.
.1.3.6.1.4.1.11.2.14.11.15.8.12.1.1.1.1.4,HPN-ICF-MPLS-LSR-MIB::hpnicfmplsInterfaceLabelMinOut,Unsigned32,read-only,,current,,This is the minimum value of an MPLS label that this LSR is willing to send on this interface.
.1.3.6.1.4.1.11.2.14.11.15.8.12.1.1.1.1.5,HPN-ICF-MPLS-LSR-MIB::hpnicfmplsInterfaceLabelMaxOut,Unsigned32,read-only,,current,,This is the maximum value of an MPLS label that this LSR is willing to send on this interface.
.1.3.6.1.4.1.11.2.14.11.15.8.12.1.1.1.1.6,HPN-ICF-MPLS-LSR-MIB::hpnicfmplsInterfaceTotalBandwidth,Integer32,read-only,,current,,This value indicates the total amount of usable bandwidth on this interface and is specified in kilobits per second (Kbps). This variable is not applicable when applied to the interface with index 0.
.1.3.6.1.4.1.11.2.14.11.15.8.12.1.1.1.1.7,HPN-ICF-MPLS-LSR-MIB::hpnicfmplsInterfaceAvailableBandwidth,Integer32,read-only,,current,,This value indicates the total amount of available bandwidth available on this interface and is specified in kilobits per second (Kbps). This value is calculated as the difference between the amount of bandwidth currently in use and that specified in hpnicfmplsInterfaceTotalBandwidth. This variable is not applicable when applied to the interface with index 0.
.1.3.6.1.4.1.11.2.14.11.15.8.12.1.1.1.1.8,HPN-ICF-MPLS-LSR-MIB::hpnicfmplsInterfaceLabelParticipationType,BITS,read-only,,current,perPlatform(0):perInterface(1),Either the perPlatform(0) or perInterface(1) bit MUST be set. If the value of the hpnicfmplsInterfaceConfIndex for this entry is zero, then only the perPlatform(0) bit MUST be set and the perInterface(1) bit is meaningless. If the perInterface(1) bit is set then the value of hpnicfmplsInterfaceLabelMinIn, hpnicfmplsInterfaceLabelMaxIn, hpnicfmplsInterfaceLabelMinOut, and hpnicfmplsInterfaceLabelMaxOut for this entry reflect the label ranges for this interface. If only the perPlatform(0) bit is set, then the value of hpnicfmplsInterfaceLabelMinIn, hpnicfmplsInterfaceLabelMaxIn, hpnicfmplsInterfaceLabelMinOut, and hpnicfmplsInterfaceLabelMaxOut for this entry must be identical to the instance of these objects with index 0.
.1.3.6.1.4.1.11.2.14.11.15.8.12.1.1.1.1.9,HPN-ICF-MPLS-LSR-MIB::hpnicfmplsInterfaceConfStorageType,INTEGER,read-create,,current,other(1):volatile(2):nonVolatile(3):permanent(4):readOnly(5),The storage type for this entry.
.1.3.6.1.4.1.11.2.14.11.15.8.12.1.1.2,HPN-ICF-MPLS-LSR-MIB::hpnicfmplsInterfacePerfTable,,not-accessible,,current,,This table provides MPLS performance information on a per-interface basis.
.1.3.6.1.4.1.11.2.14.11.15.8.12.1.1.2.1,HPN-ICF-MPLS-LSR-MIB::hpnicfmplsInterfacePerfEntry,,not-accessible,,current,,An entry in this table is created by the LSR for every interface capable of supporting MPLS. Its is an extension to the hpnicfmplsInterfaceConfEntry table.
.1.3.6.1.4.1.11.2.14.11.15.8.12.1.1.2.1.1,HPN-ICF-MPLS-LSR-MIB::hpnicfmplsInterfaceInLabelsUsed,Gauge32,read-only,,current,,This object counts the number of labels that are in use at this point in time on this interface in the incoming direction. If the interface participates in the per-platform label space only, then this instance of this object MUST be identical with the instance with index 0. If the interface participates in the per-interface label space, then this this instance of this object MUST represent the number of of per-interface labels that are in use at this point in time on this interface.
.1.3.6.1.4.1.11.2.14.11.15.8.12.1.1.2.1.2,HPN-ICF-MPLS-LSR-MIB::hpnicfmplsInterfaceFailedLabelLookup,Counter32,read-only,,current,,This object counts the number of labeled packets that have been received on this interface and were discarded because there was no matching cross-connect entry. This object MUST count on a per-interface basis regardless of which label space the interface participates in.
.1.3.6.1.4.1.11.2.14.11.15.8.12.1.1.2.1.3,HPN-ICF-MPLS-LSR-MIB::hpnicfmplsInterfaceOutLabelsUsed,Gauge32,read-only,,current,,This object counts the number of top-most labels in the outgoing label stacks that are in use at this point in time on this interface. This object MUST count on a per-interface basis regardless of which label space the interface participates in.
.1.3.6.1.4.1.11.2.14.11.15.8.12.1.1.2.1.4,HPN-ICF-MPLS-LSR-MIB::hpnicfmplsInterfaceOutFragments,Counter32,read-only,,current,,This object counts the number of outgoing MPLS packets that required fragmentation before transmission on this interface. This object transmission on this interface. This object MUST count on a per-interface basis regardless of  which label space the interface participates in.
.1.3.6.1.4.1.11.2.14.11.15.8.12.1.1.3,HPN-ICF-MPLS-LSR-MIB::hpnicfmplsInSegmentTable,,not-accessible,,current,,This table contains a collection of incoming segments to an LSR.
.1.3.6.1.4.1.11.2.14.11.15.8.12.1.1.3.1,HPN-ICF-MPLS-LSR-MIB::hpnicfmplsInSegmentEntry,,not-accessible,hpnicfmplsInSegmentIfIndex:hpnicfmplsInSegmentLabel,current,,An entry in this table represents one incoming segment. An entry can be created by a network administrator or an SNMP agent, or an MPLS signaling protocol. The creator of the entry is denoted by hpnicfmplsInSegmentOwner. An entry in this table is indexed by the ifIndex of the incoming interface and the (top) label.
.1.3.6.1.4.1.11.2.14.11.15.8.12.1.1.3.1.1,HPN-ICF-MPLS-LSR-MIB::hpnicfmplsInSegmentIfIndex,Integer32,accessible-for-notify,,current,,This is a unique index for an entry in the hpnicfmplsInSegmentTable. This value represents the interface index for the incoming MPLS interface. A value of zero represents an incoming label from the per-platform label space. In this case, the hpnicfmplsInSegmentLabel is interpreted to be an MPLS-type label.
.1.3.6.1.4.1.11.2.14.11.15.8.12.1.1.3.1.2,HPN-ICF-MPLS-LSR-MIB::hpnicfmplsInSegmentLabel,Unsigned32,accessible-for-notify,,current,,The incoming label for this segment.
.1.3.6.1.4.1.11.2.14.11.15.8.12.1.1.3.1.3,HPN-ICF-MPLS-LSR-MIB::hpnicfmplsInSegmentNPop,Integer32,read-create,,current,,The number of labels to pop from the incoming packet. Normally only the top label is popped from the packet and used for all switching decisions for that packet. Note that technologies which do not support label popping should set this value to its default value of 1.
.1.3.6.1.4.1.11.2.14.11.15.8.12.1.1.3.1.4,HPN-ICF-MPLS-LSR-MIB::hpnicfmplsInSegmentAddrFamily,INTEGER,read-create,,current,other(0):ipV4(1):ipV6(2):nsap(3):hdlc(4):bbn1822(5):all802(6):e163(7):e164(8):f69(9):x121(10):ipx(11):appleTalk(12):decnetIV(13):banyanVines(14):e164withNsap(15):dns(16):distinguishedName(17):asNumber(18):xtpOverIpv4(19):xtpOverIpv6(20):xtpNativeModeXTP(21):fibreChannelWWPN(22):fibreChannelWWNN(23):gwid(24):afi(25):mplsTpSectionEndpointIdentifier(26):mplsTpLspEndpointIdentifier(27):mplsTpPseudowireEndpointIdentifier(28):eigrpCommonServiceFamily(16384):eigrpIpv4ServiceFamily(16385):eigrpIpv6ServiceFamily(16386):lispCanonicalAddressFormat(16387):bgpLs(16388):fortyeightBitMac(16389):sixtyfourBitMac(16390):oui(16391):mac24(16392):mac40(16393):ipv664(16394):rBridgePortID(16395):trillNickname(16396):reserved(65535),The IANA address family [IANAFamily] of the incoming packet. A value of other(0) indicates that the family type is either unknown or undefined.
.1.3.6.1.4.1.11.2.14.11.15.8.12.1.1.3.1.5,HPN-ICF-MPLS-LSR-MIB::hpnicfmplsInSegmentXCIndex,Integer32,read-only,,current,,Index into hpnicfmplsXCTable which identifies which cross- connect entry this segment is part of. A value of zero indicates that this entry is not referred to by any cross-connect entry. When a cross-connect entry is created which this in-segment is a part of, this object is automatically updated to reflect the value of hpnicfmplsXCIndex of that cross-connect entry.
.1.3.6.1.4.1.11.2.14.11.15.8.12.1.1.3.1.6,HPN-ICF-MPLS-LSR-MIB::hpnicfmplsInSegmentOwner,INTEGER,read-create,,current,other(1):snmp(2):ldp(3):rsvp(4):crldp(5):policyAgent(6):unknown(7),Denotes the entity that created and is responsible for managing this segment.
.1.3.6.1.4.1.11.2.14.11.15.8.12.1.1.3.1.7,HPN-ICF-MPLS-LSR-MIB::hpnicfmplsInSegmentTrafficParamPtr,OBJECT,read-create,,current,,This variable represents a pointer to the traffic parameter specification for this in-segment. This value may point at an entry in the hpnicfmplsTrafficParamTable to indicate which hpnicfmplsTrafficParamEntry is to be assigned to this segment. This value may optionally point at an externally defined traffic parameter specification table. A value of zero-dot-zero indicates best-effort treatment. By having the same value of this object, two or more segments can indicate resource sharing.
.1.3.6.1.4.1.11.2.14.11.15.8.12.1.1.3.1.8,HPN-ICF-MPLS-LSR-MIB::hpnicfmplsInSegmentRowStatus,INTEGER,read-create,,current,active(1):notInService(2):notReady(3):createAndGo(4):createAndWait(5):destroy(6),This variable is used to create, modify, and/or delete a row in this table.
.1.3.6.1.4.1.11.2.14.11.15.8.12.1.1.3.1.9,HPN-ICF-MPLS-LSR-MIB::hpnicfmplsInSegmentStorageType,INTEGER,read-create,,current,other(1):volatile(2):nonVolatile(3):permanent(4):readOnly(5),This variable indicates the storage type for this object.
.1.3.6.1.4.1.11.2.14.11.15.8.12.1.1.4,HPN-ICF-MPLS-LSR-MIB::hpnicfmplsInSegmentPerfTable,,not-accessible,,current,,This table contains statistical information for incoming MPLS segments to an LSR.
.1.3.6.1.4.1.11.2.14.11.15.8.12.1.1.4.1,HPN-ICF-MPLS-LSR-MIB::hpnicfmplsInSegmentPerfEntry,,not-accessible,,current,,An entry in this table contains statistical information about one incoming segment which was configured in the hpnicfmplsInSegmentTable. The counters in this entry should behave in a manner similar to that of the interface.
.1.3.6.1.4.1.11.2.14.11.15.8.12.1.1.4.1.1,HPN-ICF-MPLS-LSR-MIB::hpnicfmplsInSegmentOctets,Counter32,read-only,,current,,This value represents the total number of octets received by this segment.
.1.3.6.1.4.1.11.2.14.11.15.8.12.1.1.4.1.2,HPN-ICF-MPLS-LSR-MIB::hpnicfmplsInSegmentPackets,Counter32,read-only,,current,,Total number of packets received by this segment.
.1.3.6.1.4.1.11.2.14.11.15.8.12.1.1.4.1.3,HPN-ICF-MPLS-LSR-MIB::hpnicfmplsInSegmentErrors,Counter32,read-only,,current,,The number of errored packets received on this segment.
.1.3.6.1.4.1.11.2.14.11.15.8.12.1.1.4.1.4,HPN-ICF-MPLS-LSR-MIB::hpnicfmplsInSegmentDiscards,Counter32,read-only,,current,,The number of labeled packets received on this in- segment, which were chosen to be discarded even though no errors had been detected to prevent their being transmitted. One possible reason for discarding such a labeled packet could be to free up buffer space.
.1.3.6.1.4.1.11.2.14.11.15.8.12.1.1.4.1.5,HPN-ICF-MPLS-LSR-MIB::hpnicfmplsInSegmentHCOctets,Counter64,read-only,,current,,The total number of octets received. This is the 64 bit version of hpnicfmplsInSegmentOctets.
.1.3.6.1.4.1.11.2.14.11.15.8.12.1.1.4.1.6,HPN-ICF-MPLS-LSR-MIB::hpnicfmplsInSegmentPerfDiscontinuityTime,TimeTicks,read-only,,current,,The value of sysUpTime on the most recent occasion at which any one or more of this segment's Counter32 or Counter64 suffered a discontinuity. If no such discontinuities have occurred since the last re- initialization of the local management subsystem, then this object contains a zero value.
.1.3.6.1.4.1.11.2.14.11.15.8.12.1.1.5,HPN-ICF-MPLS-LSR-MIB::hpnicfmplsOutSegmentIndexNext,Integer32,read-only,,current,,This object contains the next appropriate value to be used for hpnicfmplsOutSegmentIndex when creating entries in the hpnicfmplsOutSegmentTable. If the number of unassigned entries is exhausted, this object will take on the value of 0. To obtain the hpnicfmplsOutSegmentIndex value for a new entry, the manager must first issue a management protocol retrieval operation to obtain the current value of this object. The agent should modify the value to reflect the next unassigned index after each retrieval operation. After a manager retrieves a value the agent will determine through its local policy when this index value will be made available for reuse.
.1.3.6.1.4.1.11.2.14.11.15.8.12.1.1.6,HPN-ICF-MPLS-LSR-MIB::hpnicfmplsOutSegmentTable,,not-accessible,,current,,This table contains a representation of the outgoing segments from an LSR.
.1.3.6.1.4.1.11.2.14.11.15.8.12.1.1.6.1,HPN-ICF-MPLS-LSR-MIB::hpnicfmplsOutSegmentEntry,,not-accessible,hpnicfmplsOutSegmentIndex,current,,An entry in this table represents one outgoing segment. An entry can be created by a network administrator or an SNMP agent, or an MPLS signaling protocol. The object hpnicfmplsOutSegmentOwner indicates the creator of this entry.
.1.3.6.1.4.1.11.2.14.11.15.8.12.1.1.6.1.1,HPN-ICF-MPLS-LSR-MIB::hpnicfmplsOutSegmentIndex,Integer32,accessible-for-notify,,current,,This value contains a unique index for this row. While a value of 0 is not valid as an index for this row it can be supplied as a valid value to index hpnicfmplsXCTable to access entries for which no out- segment has been configured.
.1.3.6.1.4.1.11.2.14.11.15.8.12.1.1.6.1.2,HPN-ICF-MPLS-LSR-MIB::hpnicfmplsOutSegmentIfIndex,Integer32,read-create,,current,,This value contains the interface index of the outgoing interface.
.1.3.6.1.4.1.11.2.14.11.15.8.12.1.1.6.1.3,HPN-ICF-MPLS-LSR-MIB::hpnicfmplsOutSegmentPushTopLabel,INTEGER,read-create,,current,true(1):false(2),This value indicates whether or not a top label should be pushed onto the outgoing packet's label stack. The value of this variable must be set to true if the outgoing interface does not support pop- and-go (for example an ATM interface) or if it is a tunnel origination. Note that it is considered an error in the case that hpnicfmplsOutSegmentPushTopLabel is set to false, but the cross-connect entry which refers to this out-segment has a non-zero hpnicfmplsLabelStackIndex. The LSR MUST ensure that this situation does not happen 
.1.3.6.1.4.1.11.2.14.11.15.8.12.1.1.6.1.4,HPN-ICF-MPLS-LSR-MIB::hpnicfmplsOutSegmentTopLabel,Unsigned32,read-create,,current,,If hpnicfmplsOutSegmentPushTopLabel is true then this represents the label that should be pushed onto the top of the outgoing packet's label stack.
.1.3.6.1.4.1.11.2.14.11.15.8.12.1.1.6.1.5,HPN-ICF-MPLS-LSR-MIB::hpnicfmplsOutSegmentNextHopIpAddrType,INTEGER,read-create,,current,unknown(0):ipv4(1):ipv6(2):ipv4z(3):ipv6z(4):dns(16),Indicates whether the next hop address is IPv4 or IPv6. Note that a value of unknown (0) is valid only when the outgoing interface is of type point-to- point.
.1.3.6.1.4.1.11.2.14.11.15.8.12.1.1.6.1.6,HPN-ICF-MPLS-LSR-MIB::hpnicfmplsOutSegmentNextHopIpv4Addr,OCTET,read-create,,current,,IPv4 Address of the next hop. Its value is significant only when hpnicfmplsOutSegmentNextHopIpAddrType is ipV4 (1), otherwise it should return a value of 0.
.1.3.6.1.4.1.11.2.14.11.15.8.12.1.1.6.1.7,HPN-ICF-MPLS-LSR-MIB::hpnicfmplsOutSegmentNextHopIpv6Addr,OCTET,read-create,,current,,IPv6 address of the next hop. Its value is significant only when hpnicfmplsOutSegmentNextHopIpAddrType is ipV6 (2), otherwise it should return a value of 0.
.1.3.6.1.4.1.11.2.14.11.15.8.12.1.1.6.1.8,HPN-ICF-MPLS-LSR-MIB::hpnicfmplsOutSegmentXCIndex,Integer32,read-only,,current,,Index into hpnicfmplsXCTable which identifies which cross- connect entry this segment is part of. A value of zero indicates that this entry is not referred to by any cross-connect entry. When a cross-connect entry is created which this out-segment is a part of, this object is automatically updated to reflect the value of hpnicfmplsXCIndex of that cross-connect entry.
.1.3.6.1.4.1.11.2.14.11.15.8.12.1.1.6.1.9,HPN-ICF-MPLS-LSR-MIB::hpnicfmplsOutSegmentOwner,INTEGER,read-create,,current,other(1):snmp(2):ldp(3):rsvp(4):crldp(5):policyAgent(6):unknown(7),Denotes the entity which created and is responsible for managing this segment.
.1.3.6.1.4.1.11.2.14.11.15.8.12.1.1.6.1.10,HPN-ICF-MPLS-LSR-MIB::hpnicfmplsOutSegmentTrafficParamPtr,OBJECT,read-create,,current,,This variable represents a pointer to the traffic parameter specification for this out-segment. This value may point at an entry in the hpnicfmplsTrafficParamTable to indicate which hpnicfmplsTrafficParamEntry is to be assigned to this segment. This value may optionally point at an externally defined traffic parameter specification table. A value of zero-dot-zero indicates best- effort treatment. By having the same value of this object, two or more segments can indicate resource sharing.
.1.3.6.1.4.1.11.2.14.11.15.8.12.1.1.6.1.11,HPN-ICF-MPLS-LSR-MIB::hpnicfmplsOutSegmentRowStatus,INTEGER,read-create,,current,active(1):notInService(2):notReady(3):createAndGo(4):createAndWait(5):destroy(6),For creating, modifying, and deleting this row.
.1.3.6.1.4.1.11.2.14.11.15.8.12.1.1.6.1.12,HPN-ICF-MPLS-LSR-MIB::hpnicfmplsOutSegmentStorageType,INTEGER,read-create,,current,other(1):volatile(2):nonVolatile(3):permanent(4):readOnly(5),This variable indicates the storage type for this object.
.1.3.6.1.4.1.11.2.14.11.15.8.12.1.1.7,HPN-ICF-MPLS-LSR-MIB::hpnicfmplsOutSegmentPerfTable,,not-accessible,,current,,This table contains statistical information about outgoing segments from an LSR. The counters in this entry should behave in a manner similar to that of the interface.
.1.3.6.1.4.1.11.2.14.11.15.8.12.1.1.7.1,HPN-ICF-MPLS-LSR-MIB::hpnicfmplsOutSegmentPerfEntry,,not-accessible,,current,,An entry in this table contains statistical information about one outgoing segment configured in hpnicfmplsOutSegmentTable.
.1.3.6.1.4.1.11.2.14.11.15.8.12.1.1.7.1.1,HPN-ICF-MPLS-LSR-MIB::hpnicfmplsOutSegmentOctets,Counter32,read-only,,current,,This value contains the total number of octets sent on this segment.
.1.3.6.1.4.1.11.2.14.11.15.8.12.1.1.7.1.2,HPN-ICF-MPLS-LSR-MIB::hpnicfmplsOutSegmentPackets,Counter32,read-only,,current,,This value contains the total number of packets sent on this segment.
.1.3.6.1.4.1.11.2.14.11.15.8.12.1.1.7.1.3,HPN-ICF-MPLS-LSR-MIB::hpnicfmplsOutSegmentErrors,Counter32,read-only,,current,,Number of packets that could not be sent due to errors on this segment.
.1.3.6.1.4.1.11.2.14.11.15.8.12.1.1.7.1.4,HPN-ICF-MPLS-LSR-MIB::hpnicfmplsOutSegmentDiscards,Counter32,read-only,,current,,The number of labeled packets received on this out- segment, which were chosen to be discarded even though no errors had been detected to prevent their being transmitted. One possible reason for discarding such a labeled packet could be to free up buffer space.
.1.3.6.1.4.1.11.2.14.11.15.8.12.1.1.7.1.5,HPN-ICF-MPLS-LSR-MIB::hpnicfmplsOutSegmentHCOctets,Counter64,read-only,,current,,Total number of octets sent. This is the 64 bit version of hpnicfmplsOutSegmentOctets.
.1.3.6.1.4.1.11.2.14.11.15.8.12.1.1.7.1.6,HPN-ICF-MPLS-LSR-MIB::hpnicfmplsOutSegmentPerfDiscontinuityTime,TimeTicks,read-only,,current,,The value of sysUpTime on the most recent occasion at which any one or more of this segment's Counter32 or Counter64 suffered a discontinuity. If no such discontinuities have occurred since the last re- initialization of the local management subsystem, then this object contains a zero value.
.1.3.6.1.4.1.11.2.14.11.15.8.12.1.1.8,HPN-ICF-MPLS-LSR-MIB::hpnicfmplsXCIndexNext,Integer32,read-only,,current,,This object contains an appropriate value to be used for hpnicfmplsXCIndex when creating entries in the hpnicfmplsXCTable. The value 0 indicates that no unassigned entries are available. To obtain the value of hpnicfmplsXCIndex for a new entry in the hpnicfmplsXCTable, the manager issues a management protocol retrieval operation to obtain the current value of hpnicfmplsXCIndex. After each retrieval operation, the agent should modify the value to reflect the next unassigned index. After a manager retrieves a value the agent will determine through its local policy when this index value will be made available for reuse.
.1.3.6.1.4.1.11.2.14.11.15.8.12.1.1.9,HPN-ICF-MPLS-LSR-MIB::hpnicfmplsXCTable,,not-accessible,,current,,This table specifies information for switching between LSP segments. It supports point-to-point, point-to-multipoint and multipoint-to-point connections. hpnicfmplsLabelStackTable specifies the label stack information for a cross-connect LSR and is referred to from hpnicfmplsXCTable.
.1.3.6.1.4.1.11.2.14.11.15.8.12.1.1.9.1,HPN-ICF-MPLS-LSR-MIB::hpnicfmplsXCEntry,,not-accessible,hpnicfmplsXCIndex:hpnicfmplsInSegmentIfIndex:hpnicfmplsInSegmentLabel:hpnicfmplsOutSegmentIndex,current,,A row in this table represents one cross-connect entry. The following objects index it:  - cross-connect index hpnicfmplsXCIndex that uniquely identifies a group of cross-connect entries - interface index of the in-segment, hpnicfmplsInSegmentIfIndex - incoming label(s), hpnicfmplsInSegmentLabel - out-segment index, hpnicfmplsOutSegmentIndex  Originating LSPs: These are represented by using the special combination of values hpnicfmplsInSegmentIfIndex=0 and hpnicfmplsInSegmentLabel=0 as indexes. In this case the hpnicfmplsOutSegmentIndex MUST be non-zero.  Terminating LSPs: These are represented by using the special value hpnicfmplsOutSegmentIndex=0 as index. Special labels: Entries indexed by reserved MPLS label values 0 through 15 imply terminating LSPs and MUST have hpnicfmplsOutSegmentIfIndex = 0. Note that situations where LSPs are terminated with incoming label equal to 0, should have hpnicfmplsInSegmentIfIndex = 0 as well, but can be distinguished from originating LSPs because the hpnicfmplsOutSegmentIfIndex = 0. The hpnicfmplsOutSegmentIfIndex MUST only be set to 0 in cases of terminating LSPs.  An entry can be created by a network administrator or by an SNMP agent as instructed by an MPLS signaling protocol.
.1.3.6.1.4.1.11.2.14.11.15.8.12.1.1.9.1.1,HPN-ICF-MPLS-LSR-MIB::hpnicfmplsXCIndex,Integer32,accessible-for-notify,,current,,Primary index for the conceptual row identifying  a group of cross-connect segments.
.1.3.6.1.4.1.11.2.14.11.15.8.12.1.1.9.1.2,HPN-ICF-MPLS-LSR-MIB::hpnicfmplsXCLspId,OCTET,read-create,,current,,This value identifies the label switched path that this cross-connect entry belongs to.
.1.3.6.1.4.1.11.2.14.11.15.8.12.1.1.9.1.3,HPN-ICF-MPLS-LSR-MIB::hpnicfmplsXCLabelStackIndex,Integer32,read-create,,current,,Primary index into hpnicfmplsLabelStackTable identifying a stack of labels to be pushed beneath the top label. Note that the top label identified by the out- segment ensures that all the components of a multipoint-to-point connection have the same outgoing label. A value of 0 indicates that no labels are to be stacked beneath the top label.
.1.3.6.1.4.1.11.2.14.11.15.8.12.1.1.9.1.4,HPN-ICF-MPLS-LSR-MIB::hpnicfmplsXCIsPersistent,INTEGER,read-create,,current,true(1):false(2),Denotes whether or not this cross-connect entry and associated in- and out-segments should be restored automatically after failures. This value MUST be set to false in cases where this cross-connect entry was created by a signaling protocol.
.1.3.6.1.4.1.11.2.14.11.15.8.12.1.1.9.1.5,HPN-ICF-MPLS-LSR-MIB::hpnicfmplsXCOwner,INTEGER,read-create,,current,other(1):snmp(2):ldp(3):rsvp(4):crldp(5):policyAgent(6):unknown(7),Denotes the entity that created and is responsible for managing this cross-connect.
.1.3.6.1.4.1.11.2.14.11.15.8.12.1.1.9.1.6,HPN-ICF-MPLS-LSR-MIB::hpnicfmplsXCRowStatus,INTEGER,read-create,,current,active(1):notInService(2):notReady(3):createAndGo(4):createAndWait(5):destroy(6),For creating, modifying, and deleting this row.
.1.3.6.1.4.1.11.2.14.11.15.8.12.1.1.9.1.7,HPN-ICF-MPLS-LSR-MIB::hpnicfmplsXCStorageType,INTEGER,read-create,,current,other(1):volatile(2):nonVolatile(3):permanent(4):readOnly(5),Defines the storage type for this object.
.1.3.6.1.4.1.11.2.14.11.15.8.12.1.1.9.1.8,HPN-ICF-MPLS-LSR-MIB::hpnicfmplsXCAdminStatus,INTEGER,read-create,,current,up(1):down(2):testing(3),The desired operational status of this segment.
.1.3.6.1.4.1.11.2.14.11.15.8.12.1.1.9.1.9,HPN-ICF-MPLS-LSR-MIB::hpnicfmplsXCOperStatus,INTEGER,read-only,,current,up(1):down(2):testing(3):unknown(4):dormant(5):notPresent(6):lowerLayerDown(7),The actual operational status of this cross- connect.
.1.3.6.1.4.1.11.2.14.11.15.8.12.1.1.10,HPN-ICF-MPLS-LSR-MIB::hpnicfmplsMaxLabelStackDepth,Integer32,read-only,,current,,The maximum stack depth supported by this LSR.
.1.3.6.1.4.1.11.2.14.11.15.8.12.1.1.11,HPN-ICF-MPLS-LSR-MIB::hpnicfmplsLabelStackIndexNext,Integer32,read-only,,current,,This object contains an appropriate value to be used for hpnicfmplsLabelStackIndex when creating entries in the hpnicfmplsLabelStackTable. The value 0 indicates that no unassigned entries are available. To obtain an hpnicfmplsLabelStackIndex value for a new entry, the manager issues a management protocol retrieval operation to obtain the current value of this object. After each retrieval operation, the agent should modify the value to reflect the next unassigned index. After a manager retrieves a value the agent will determine through its local policy when this index value will be made available for reuse.
.1.3.6.1.4.1.11.2.14.11.15.8.12.1.1.12,HPN-ICF-MPLS-LSR-MIB::hpnicfmplsLabelStackTable,,not-accessible,,current,,This table specifies the label stack to be pushed onto a packet, beneath the top label. Entries into this table are referred to from hpnicfmplsXCTable.
.1.3.6.1.4.1.11.2.14.11.15.8.12.1.1.12.1,HPN-ICF-MPLS-LSR-MIB::hpnicfmplsLabelStackEntry,,not-accessible,hpnicfmplsLabelStackIndex:hpnicfmplsLabelStackLabelIndex,current,,An entry in this table represents one label which is to be pushed onto an outgoing packet, beneath the top label. An entry can be created by a network administrator or by an SNMP agent as instructed by an MPLS signaling protocol.
.1.3.6.1.4.1.11.2.14.11.15.8.12.1.1.12.1.1,HPN-ICF-MPLS-LSR-MIB::hpnicfmplsLabelStackIndex,Integer32,not-accessible,,current,,Primary index for this row identifying a stack of labels to be pushed on an outgoing packet, beneath the top label.
.1.3.6.1.4.1.11.2.14.11.15.8.12.1.1.12.1.2,HPN-ICF-MPLS-LSR-MIB::hpnicfmplsLabelStackLabelIndex,Integer32,not-accessible,,current,,Secondary index for this row identifying one label of the stack. Note that an entry with a smaller hpnicfmplsLabelStackLabelIndex would refer to a label higher up the label stack and would be popped at a downstream LSR before a label represented by a higher hpnicfmplsLabelStackLabelIndex at a downstream LSR.
.1.3.6.1.4.1.11.2.14.11.15.8.12.1.1.12.1.3,HPN-ICF-MPLS-LSR-MIB::hpnicfmplsLabelStackLabel,Unsigned32,read-create,,current,,The label to pushed.
.1.3.6.1.4.1.11.2.14.11.15.8.12.1.1.12.1.4,HPN-ICF-MPLS-LSR-MIB::hpnicfmplsLabelStackRowStatus,INTEGER,read-create,,current,active(1):notInService(2):notReady(3):createAndGo(4):createAndWait(5):destroy(6),For creating, modifying, and deleting this row.
.1.3.6.1.4.1.11.2.14.11.15.8.12.1.1.12.1.5,HPN-ICF-MPLS-LSR-MIB::hpnicfmplsLabelStackStorageType,INTEGER,read-create,,current,other(1):volatile(2):nonVolatile(3):permanent(4):readOnly(5),Defines the storage type for this object.
.1.3.6.1.4.1.11.2.14.11.15.8.12.1.1.13,HPN-ICF-MPLS-LSR-MIB::hpnicfmplsTrafficParamIndexNext,Integer32,read-only,,current,,This object contains an appropriate value which will be used for hpnicfmplsTrafficParamIndex when creating entries in the hpnicfmplsTrafficParamTable. The value 0 indicates that no unassigned entries are available. To obtain the hpnicfmplsTrafficParamIndex value for a new entry, the manager issues a management protocol retrieval operation to obtain the current value of this object. After each retrieval operation, the agent should modify the value to reflect the next unassigned index. After a manager retrieves a value the agent will determine through its local policy when this index value will be made available for reuse.
.1.3.6.1.4.1.11.2.14.11.15.8.12.1.1.14,HPN-ICF-MPLS-LSR-MIB::hpnicfmplsTrafficParamTable,,not-accessible,,current,,This table specifies the Traffic Parameter objects for in and out-segments.
.1.3.6.1.4.1.11.2.14.11.15.8.12.1.1.14.1,HPN-ICF-MPLS-LSR-MIB::hpnicfmplsTrafficParamEntry,,not-accessible,hpnicfmplsTrafficParamIndex,current,,An entry in this table represents the TrafficParam objects for one or more in or out segments. A single entry can be pointed to by multiple segments indicating resource sharing.
.1.3.6.1.4.1.11.2.14.11.15.8.12.1.1.14.1.1,HPN-ICF-MPLS-LSR-MIB::hpnicfmplsTrafficParamIndex,Integer32,not-accessible,,current,,Uniquely identifies this row of the table. Note that zero represents an invalid index.
.1.3.6.1.4.1.11.2.14.11.15.8.12.1.1.14.1.2,HPN-ICF-MPLS-LSR-MIB::hpnicfmplsTrafficParamMaxRate,Integer32,read-create,,current,,Maximum rate in kilobits/second.
.1.3.6.1.4.1.11.2.14.11.15.8.12.1.1.14.1.3,HPN-ICF-MPLS-LSR-MIB::hpnicfmplsTrafficParamMeanRate,Integer32,read-create,,current,,Mean rate in kilobits/second.
.1.3.6.1.4.1.11.2.14.11.15.8.12.1.1.14.1.4,HPN-ICF-MPLS-LSR-MIB::hpnicfmplsTrafficParamMaxBurstSize,Integer32,read-create,,current,,Maximum burst size in bytes.
.1.3.6.1.4.1.11.2.14.11.15.8.12.1.1.14.1.5,HPN-ICF-MPLS-LSR-MIB::hpnicfmplsTrafficParamRowStatus,INTEGER,read-create,,current,active(1):notInService(2):notReady(3):createAndGo(4):createAndWait(5):destroy(6),For creating, modifying, and deleting this row.
.1.3.6.1.4.1.11.2.14.11.15.8.12.1.1.14.1.6,HPN-ICF-MPLS-LSR-MIB::hpnicfmplsTrafficParamStorageType,INTEGER,read-create,,current,other(1):volatile(2):nonVolatile(3):permanent(4):readOnly(5),The storage type for this object.
.1.3.6.1.4.1.11.2.14.11.15.8.12.1.1.15,HPN-ICF-MPLS-LSR-MIB::hpnicfmplsXCTrapEnable,INTEGER,read-write,,current,true(1):false(2),If this object is true, then it enables the generation of hpnicfmplsXCUp and hpnicfmplsXCDown traps, otherwise these traps are not emitted.
.1.3.6.1.4.1.11.2.14.11.15.8.12.1.2,HPN-ICF-MPLS-LSR-MIB::hpnicfmplsLsrNotifications,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.8.12.1.2.0,HPN-ICF-MPLS-LSR-MIB::hpnicfmplsLsrNotifyPrefix,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.8.12.1.2.0.1,HPN-ICF-MPLS-LSR-MIB::hpnicfmplsXCUp,,,,,,This notification is generated when a hpnicfmplsXCOperStatus object for one of the configured cross-connect entries is about to leave the down state and transition into some other state (but not into the notPresent state). This other state is indicated by the included value of hpnicfmplsXCOperStatus.
.1.3.6.1.4.1.11.2.14.11.15.8.12.1.2.0.2,HPN-ICF-MPLS-LSR-MIB::hpnicfmplsXCDown,,,,,,This notification is generated when a hpnicfmplsXCOperStatus object for one of the configured cross-connect entries is about to enter the down state from some other state (but not from the notPresent state). This other state is indicated by the included value of hpnicfmplsXCOperStatus.
.1.3.6.1.4.1.11.2.14.11.15.8.12.1.3,HPN-ICF-MPLS-LSR-MIB::hpnicfmplsLsrConformance,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.8.12.1.3.1,HPN-ICF-MPLS-LSR-MIB::hpnicfmplsLsrGroups,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.8.12.1.3.1.1,HPN-ICF-MPLS-LSR-MIB::hpnicfmplsInterfaceGroup,,,,,,Collection of objects needed for MPLS interface configuration and performance information.
.1.3.6.1.4.1.11.2.14.11.15.8.12.1.3.1.2,HPN-ICF-MPLS-LSR-MIB::hpnicfmplsInSegmentGroup,,,,,,Collection of objects needed to implement an in- segment.
.1.3.6.1.4.1.11.2.14.11.15.8.12.1.3.1.3,HPN-ICF-MPLS-LSR-MIB::hpnicfmplsOutSegmentGroup,,,,,,Collection of objects needed to implement an out- segment.
.1.3.6.1.4.1.11.2.14.11.15.8.12.1.3.1.4,HPN-ICF-MPLS-LSR-MIB::hpnicfmplsXCGroup,,,,,,Collection of objects needed to implement a cross-connect entry.
.1.3.6.1.4.1.11.2.14.11.15.8.12.1.3.1.5,HPN-ICF-MPLS-LSR-MIB::hpnicfmplsXCOptionalGroup,,,,,,Collection of optional objects for implementing  a cross-connect entry.
.1.3.6.1.4.1.11.2.14.11.15.8.12.1.3.1.6,HPN-ICF-MPLS-LSR-MIB::hpnicfmplsPerfGroup,,,,,,Collection of objects providing performance information about an LSR.
.1.3.6.1.4.1.11.2.14.11.15.8.12.1.3.1.7,HPN-ICF-MPLS-LSR-MIB::hpnicfmplsHCInSegmentPerfGroup,,,,,,Object(s) providing performance information specific to out-segments for which the object hpnicfmplsInterfaceInOctets wraps around too quickly.
.1.3.6.1.4.1.11.2.14.11.15.8.12.1.3.1.8,HPN-ICF-MPLS-LSR-MIB::hpnicfmplsHCOutSegmentPerfGroup,,,,,,Object(s) providing performance information specific to out-segments for which the object hpnicfmplsInterfaceOutOctets wraps around too quickly.
.1.3.6.1.4.1.11.2.14.11.15.8.12.1.3.1.9,HPN-ICF-MPLS-LSR-MIB::hpnicfmplsTrafficParamGroup,,,,,,Object(s) required for supporting QoS resource reservation.
.1.3.6.1.4.1.11.2.14.11.15.8.12.1.3.1.10,HPN-ICF-MPLS-LSR-MIB::hpnicfmplsXCIsPersistentGroup,,,,,,Objects needed to support persistent cross- connects.
.1.3.6.1.4.1.11.2.14.11.15.8.12.1.3.1.11,HPN-ICF-MPLS-LSR-MIB::hpnicfmplsXCIsNotPersistentGroup,,,,,,Objects needed to support non-persistent cross- connects.
.1.3.6.1.4.1.11.2.14.11.15.8.12.1.3.1.12,HPN-ICF-MPLS-LSR-MIB::hpnicfmplsLabelStackGroup,,,,,,Objects needed to support label stacking.
.1.3.6.1.4.1.11.2.14.11.15.8.12.1.3.1.13,HPN-ICF-MPLS-LSR-MIB::hpnicfmplsSegmentDiscontinuityGroup,,,,,, A collection of objects providing information specific to segment discontinuities..
.1.3.6.1.4.1.11.2.14.11.15.8.12.1.3.1.14,HPN-ICF-MPLS-LSR-MIB::hpnicfmplsLsrNotificationGroup,,,,,,Set of notifications implemented in this module. None is mandatory.
.1.3.6.1.4.1.11.2.14.11.15.8.12.1.3.2,HPN-ICF-MPLS-LSR-MIB::hpnicfmplsLsrCompliances,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.8.12.1.3.2.1,HPN-ICF-MPLS-LSR-MIB::hpnicfmplsLsrModuleCompliance,,,,,,Compliance statement for agents that support the MPLS LSR MIB.
.1.3.6.1.4.1.11.2.14.11.15.8.12.2,HPN-ICF-OID-MIB::hpnicfMplsLdp,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.8.12.2.1,HPN-ICF-MPLS-LDP-MIB::hpnicfMplsLdpObjects,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.8.12.2.1.1,HPN-ICF-MPLS-LDP-MIB::hpnicfMplsLdpLsrObjects,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.8.12.2.1.1.1,HPN-ICF-MPLS-LDP-MIB::hpnicfMplsLdpLsrIncarnTable,,not-accessible,,current,,MPLS provides support for multiple incarnations of the  MPLS Stack in a target. The LSR defined in the standard <IETF DRAFT> MIB is treated as an incarnation in this MIB. Using a local policy the Network administrator must group the LDP Entities that should be placed in an incarnation.
.1.3.6.1.4.1.11.2.14.11.15.8.12.2.1.1.1.1,HPN-ICF-MPLS-LDP-MIB::hpnicfMplsLdpLsrIncarnEntry,,not-accessible,hpnicfMplsLdpLsrIncarnID,current,,An entry in this table represents an LSR incarnation. All the entries in this table are created initially when the  LDP is initiated. The row status of each entry will be in  'notInService' state initially. The row status must be set to 'active' after the necessary configurations are complete with respect to an incarnation. Currenlty the LSR ID of the incarnation is the only mandatory parameter that must be set before the rowStatus is set to  'active'. An LSR Incarnation Entity is uniquely indexed by its Incarnation Identifier.
.1.3.6.1.4.1.11.2.14.11.15.8.12.2.1.1.1.1.1,HPN-ICF-MPLS-LDP-MIB::hpnicfMplsLdpLsrID,OCTET,read-write,,current,,The LSR's Identifier.
.1.3.6.1.4.1.11.2.14.11.15.8.12.2.1.1.1.1.2,HPN-ICF-MPLS-LDP-MIB::hpnicfMplsLdpLsrLoopDetectionPresent,INTEGER,read-only,,current,true(1):false(2),A indication of whether this LSR supports loop detection. A  value of 'true' indicates this LSR does support loop detection.  A value of 'false' indicates this LSR does not support loop detection.
.1.3.6.1.4.1.11.2.14.11.15.8.12.2.1.1.1.1.3,HPN-ICF-MPLS-LDP-MIB::hpnicfMplsLdpLsrLoopDetectionAdminStatus,INTEGER,read-write,,current,enabled(1):disabled(2),To enable loop detection the value of this object should be  'enabled(1)'. Otherwise, to turn off loop detection, set this  value to 'disabled(2)'.
.1.3.6.1.4.1.11.2.14.11.15.8.12.2.1.1.1.1.4,HPN-ICF-MPLS-LDP-MIB::hpnicfMplsLdpLsrPathVectorLimit,INTEGER,read-write,,current,,This object only has meaning if hpnicfMplsLdpLsrLoopDetectionPresent  has the value of 'true'. The value of this object represents the limit of path vectors which this LSR uses to treat the message as if it had traversed a loop.
.1.3.6.1.4.1.11.2.14.11.15.8.12.2.1.1.1.1.5,HPN-ICF-MPLS-LDP-MIB::hpnicfMplsLdpLsrHopCountLimit,INTEGER,read-write,,current,,This object only has meaning if hpnicfMplsLdpLsrLoopDetectionPresent  has the value of 'true'. The value of this object represents the limit on the Hop Count  which this LSR uses to treat the message as if it had traversed a  loop.
.1.3.6.1.4.1.11.2.14.11.15.8.12.2.1.1.1.1.6,HPN-ICF-MPLS-LDP-MIB::hpnicfMplsLdpLsrLoopPreventionPresent,INTEGER,read-only,,current,true(1):false(2),A indication of whether this LSR supports loop prevention. A  value of 'true' indicates this LSR does support loop prevention.  A value of 'false' indicates this LSR does not support loop  prevention. Current release of MPLS does not provide support to assign this MIB object with a value 'true'.
.1.3.6.1.4.1.11.2.14.11.15.8.12.2.1.1.1.1.7,HPN-ICF-MPLS-LDP-MIB::hpnicfMplsLdpLsrLoopPreventionAdminStatus,INTEGER,read-write,,current,enabled(1):disabled(2),To enable loop prevention the value of this object should be  'enabled(1)'. Otherwise, to turn off loop prevention, set this  value to 'disabled(2)'. Current release of MPLS does not provide support to assign this MIB object with a value 'enabled'.
.1.3.6.1.4.1.11.2.14.11.15.8.12.2.1.1.1.1.8,HPN-ICF-MPLS-LDP-MIB::hpnicfMplsLdpLsrLabelRetentionMode,INTEGER,read-write,,current,conservative(1):liberal(2),The LSR can be configured to use either conservative or liberal  label retention mode. If the value of this object is conservative(1) then advertized  label mappings are retained only if they will be used to forward  packets, i.e. if label came from a valid next hop. If the value of this object is liberal(2) then all advertized label mappings are  retained whether they are from a valid next hop or not. Current release of MPLS does not provide support to assign this MIB object with a value 'liberal'.
.1.3.6.1.4.1.11.2.14.11.15.8.12.2.1.1.1.1.9,HPN-ICF-MPLS-LDP-MIB::hpnicfMplsLdpLsrIncarnID,INTEGER,read-only,,current,,The incarnation acts as index to all the elements in this table.
.1.3.6.1.4.1.11.2.14.11.15.8.12.2.1.1.1.1.10,HPN-ICF-MPLS-LDP-MIB::hpnicfMplsLdpLsrMaxLdpEntities,INTEGER,read-write,,current,,The maximum number of LDP entities that can be supported by this Incarnation.
.1.3.6.1.4.1.11.2.14.11.15.8.12.2.1.1.1.1.11,HPN-ICF-MPLS-LDP-MIB::hpnicfMplsLdpLsrMaxLocalPeers,INTEGER,read-write,,current,,The maximum number of Local LDP peers that can be supported by  this Incarnation.
.1.3.6.1.4.1.11.2.14.11.15.8.12.2.1.1.1.1.12,HPN-ICF-MPLS-LDP-MIB::hpnicfMplsLdpLsrMaxRemotePeers,INTEGER,read-write,,current,,The maximum number of Remote LDP peers that can be supported by  this Incarnation.
.1.3.6.1.4.1.11.2.14.11.15.8.12.2.1.1.1.1.13,HPN-ICF-MPLS-LDP-MIB::hpnicfMplsLdpLsrMaxIfaces,INTEGER,read-write,,current,,The maximum number of Label enabled Interfaces that can be  supported by this Incarnation.
.1.3.6.1.4.1.11.2.14.11.15.8.12.2.1.1.1.1.14,HPN-ICF-MPLS-LDP-MIB::hpnicfMplsLdpLsrMaxLsps,INTEGER,read-write,,current,,The maximum number of Label Switched Paths that can be  supported by this Incarnation.
.1.3.6.1.4.1.11.2.14.11.15.8.12.2.1.1.1.1.15,HPN-ICF-MPLS-LDP-MIB::hpnicfMplsLdpLsrMaxCrlspTnls,INTEGER,read-write,,current,,The maximum number of CRLSPs that can be supported by this Incarnation.
.1.3.6.1.4.1.11.2.14.11.15.8.12.2.1.1.1.1.16,HPN-ICF-MPLS-LDP-MIB::hpnicfMplsLdpLsrMaxErhopPerCrlspTnl,INTEGER,read-write,,current,, The maximum number of ER-Hops that can be supported in a  CRLSP tunnel.
.1.3.6.1.4.1.11.2.14.11.15.8.12.2.1.1.1.1.17,HPN-ICF-MPLS-LDP-MIB::hpnicfMplsLdpLsrRowStatus,INTEGER,read-create,,current,active(1):notInService(2):notReady(3):createAndGo(4):createAndWait(5):destroy(6),An object that allows entries in this table to be created and deleted using the RowStatus convention.
.1.3.6.1.4.1.11.2.14.11.15.8.12.2.1.1.1.1.18,HPN-ICF-MPLS-LDP-MIB::hpnicfMplsLdpLsrMaxVcmCapability,INTEGER,read-write,,current,, 
.1.3.6.1.4.1.11.2.14.11.15.8.12.2.1.1.1.1.19,HPN-ICF-MPLS-LDP-MIB::hpnicfMplsLdpLsrVcmPathVecInAllLblMapPresent,INTEGER,read-write,,current,true(1):false(2), 
.1.3.6.1.4.1.11.2.14.11.15.8.12.2.1.1.1.1.20,HPN-ICF-MPLS-LDP-MIB::hpnicfMplsLdpLsrRequestRetrytimerValue,INTEGER,read-write,,current,, 
.1.3.6.1.4.1.11.2.14.11.15.8.12.2.1.1.1.1.21,HPN-ICF-MPLS-LDP-MIB::hpnicfMplsLdpLsrNumOfRequestRetryAttempts,INTEGER,read-write,,current,, 
.1.3.6.1.4.1.11.2.14.11.15.8.12.2.1.2,HPN-ICF-MPLS-LDP-MIB::hpnicfMplsLdpEntityObjects,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.8.12.2.1.2.1,HPN-ICF-MPLS-LDP-MIB::hpnicfMplsLdpEntityTable,,not-accessible,,current,,This table contains information about the MPLS Label Distribution Protocol Entities which exist on this Label Switch Router (LSR).
.1.3.6.1.4.1.11.2.14.11.15.8.12.2.1.2.1.1,HPN-ICF-MPLS-LDP-MIB::hpnicfMplsLdpEntityEntry,,not-accessible,hpnicfMplsLdpLsrIncarnID:hpnicfMplsLdpEntityIfIndex,current,,An entry in this table represents an LDP entity. An entry can be created by a network administrator or by an SNMP agent as instructed by LDP. An LPD Entity is uniquely indexed by its LPD Identifier.
.1.3.6.1.4.1.11.2.14.11.15.8.12.2.1.2.1.1.1,HPN-ICF-MPLS-LDP-MIB::hpnicfMplsLdpEntityID,OCTET,accessible-for-notify,,current,,The LDP identifier which uniquely identifies the LDP Entity. This is s six octet quantity which is used to identify an Label Switch Router (LSR) label space. The first four octets encode an IP address assigned to the LSR, and the last two octets identify a specific label space within the LSR.
.1.3.6.1.4.1.11.2.14.11.15.8.12.2.1.2.1.1.2,HPN-ICF-MPLS-LDP-MIB::hpnicfMplsLdpEntityLabelSpaceType,INTEGER,read-create,,current,unknown(1):perInterface(2):perPlatform(3),The type of label spaces associated with this LDP Entity. The values are 'unknown(1)' The type of label space is not known. 'perInterface(2)' The type of label space is tied to an interface. 'perPlatform(3)' The type of label space is tied to the platform.
.1.3.6.1.4.1.11.2.14.11.15.8.12.2.1.2.1.1.3,HPN-ICF-MPLS-LDP-MIB::hpnicfMplsLdpEntityDefVpi,INTEGER,read-create,,current,,The Default VPI value used in the label for the default VPI.
.1.3.6.1.4.1.11.2.14.11.15.8.12.2.1.2.1.1.4,HPN-ICF-MPLS-LDP-MIB::hpnicfMplsLdpEntityDefVci,INTEGER,read-create,,current,,The Default VCI value used in the label for the default VCI.
.1.3.6.1.4.1.11.2.14.11.15.8.12.2.1.2.1.1.5,HPN-ICF-MPLS-LDP-MIB::hpnicfMplsLdpEntityUnlabTrafVpi,INTEGER,read-create,,current,,VPI value of the VCC supporting unlabeled traffic.
.1.3.6.1.4.1.11.2.14.11.15.8.12.2.1.2.1.1.6,HPN-ICF-MPLS-LDP-MIB::hpnicfMplsLdpEntityUnlabTrafVci,INTEGER,read-create,,current,,VCI value of the VCC supporting unlabeled traffic.
.1.3.6.1.4.1.11.2.14.11.15.8.12.2.1.2.1.1.7,HPN-ICF-MPLS-LDP-MIB::hpnicfMplsLdpEntityMergeCapability,INTEGER,read-create,,current,noMerge(0):vpMerge(1):vcMerge(2):vpVcMerge(3),Sets the merge capability for this LDP entity. Current Release of MPLS does not provide support for any kind of Merge.
.1.3.6.1.4.1.11.2.14.11.15.8.12.2.1.2.1.1.8,HPN-ICF-MPLS-LDP-MIB::hpnicfMplsLdpEntityVcDirectionality,INTEGER,read-create,,current,bidirectional(1):unidirectional(2),Sets the VC directionality for this LDP entity.
.1.3.6.1.4.1.11.2.14.11.15.8.12.2.1.2.1.1.9,HPN-ICF-MPLS-LDP-MIB::hpnicfMplsLdpEntityWellKnownDiscoveryPort,INTEGER,read-create,,current,,The well known LDP Discovery Port.
.1.3.6.1.4.1.11.2.14.11.15.8.12.2.1.2.1.1.10,HPN-ICF-MPLS-LDP-MIB::hpnicfMplsLdpEntityMtu,INTEGER,read-create,,current,,The maximum transmission unit (MTU) that was configured for this entity.
.1.3.6.1.4.1.11.2.14.11.15.8.12.2.1.2.1.1.11,HPN-ICF-MPLS-LDP-MIB::hpnicfMplsLdpEntityKeepAliveHoldTimer,INTEGER,read-create,,current,,The two octet value which is the proposed keep alive hold timer for this LDP Entity.
.1.3.6.1.4.1.11.2.14.11.15.8.12.2.1.2.1.1.12,HPN-ICF-MPLS-LDP-MIB::hpnicfMplsLdpEntityFailedInitSessionThreshold,INTEGER,read-create,,current,,When attempting to establish a session with a given Peer, the given LDP Entity should send out a notification when exceeding this threshold. A value of 0 (zero) for this object indicates that the threshold is infinity. In other words, a notification will not be sent if the value of this object is 0 (zero).
.1.3.6.1.4.1.11.2.14.11.15.8.12.2.1.2.1.1.13,HPN-ICF-MPLS-LDP-MIB::hpnicfMplsLdpEntityLabelDistributionMethod,INTEGER,read-create,,current,downstreamOnDemand(1):downstreamUnsolicited(2),For any given LDP session, the method of label distribution must be specified. Current release of MPLS does not provide support for 'downstreamUnsolicited'.
.1.3.6.1.4.1.11.2.14.11.15.8.12.2.1.2.1.1.14,HPN-ICF-MPLS-LDP-MIB::hpnicfMplsLdpEntityLabelAllocationMethod,INTEGER,read-create,,current,ordered(1):independent(2),For any given LDP session, the method of label allocation must be specified. Label can be allocated in either ordered mode or in the independent mode.
.1.3.6.1.4.1.11.2.14.11.15.8.12.2.1.2.1.1.15,HPN-ICF-MPLS-LDP-MIB::hpnicfMplsLdpEntityHelloHoldTimer,INTEGER,read-create,,current,,The two octet value which is the proposed hello hold timer for this LDP Entity.
.1.3.6.1.4.1.11.2.14.11.15.8.12.2.1.2.1.1.16,HPN-ICF-MPLS-LDP-MIB::hpnicfMplsLdpEntityRowStatus,INTEGER,read-create,,current,active(1):notInService(2):notReady(3):createAndGo(4):createAndWait(5):destroy(6),An object that allows entries in this table to be created and deleted using the RowStatus convention.
.1.3.6.1.4.1.11.2.14.11.15.8.12.2.1.2.2,HPN-ICF-MPLS-LDP-MIB::hpnicfMplsLdpEntityIfTable,,not-accessible,,current,,This table contains information about the interfaces that are associated with an LDP Entity. There should be atleast one interface associated with each LDP Entity. If the LDP Entity supports 'per interface based label space' label type then, atmost one interface can be  associated with the LDP entity. If the LDP Entity supports 'per platform based label space' label type then, more than one interface can be associated with the LDP Entity.
.1.3.6.1.4.1.11.2.14.11.15.8.12.2.1.2.2.1,HPN-ICF-MPLS-LDP-MIB::hpnicfMplsLdpEntityIfEntry,,not-accessible,hpnicfMplsLdpLsrIncarnID:hpnicfMplsLdpEntityIfIndex,current,,An entry in this table represents an Interface that is associated with a LDP entity. An entry can be created by a network administrator or by an SNMP agent as instructed by LDP. An interface (row in this table) can be created/deleted only when  the associted LDP Entity row status has the value notInService  or notReady.
.1.3.6.1.4.1.11.2.14.11.15.8.12.2.1.2.2.1.1,HPN-ICF-MPLS-LDP-MIB::hpnicfMplsLdpEntityIfIndex,Unsigned32,not-accessible,,current,,Identifier that uniquely identifies the Interface with  respect to an LDP Entity.  The ifIndex value corresponds to the IfIndex value of the MIB-II
.1.3.6.1.4.1.11.2.14.11.15.8.12.2.1.2.2.1.2,HPN-ICF-MPLS-LDP-MIB::hpnicfMplsLdpEntityIfIpv4Address,IpAddress,read-create,,current,,The IPv4 address associated with the interface.
.1.3.6.1.4.1.11.2.14.11.15.8.12.2.1.2.2.1.3,HPN-ICF-MPLS-LDP-MIB::hpnicfMplsLdpEntityIfRowStatus,INTEGER,read-create,,current,active(1):notInService(2):notReady(3):createAndGo(4):createAndWait(5):destroy(6),An object that allows entries in this table to be created and deleted using the RowStatus convention.
.1.3.6.1.4.1.11.2.14.11.15.8.12.2.1.2.3,HPN-ICF-MPLS-LDP-MIB::hpnicfMplsLdpEntityConfAtmLabelRangeTable,,not-accessible,,current,,The MPLS LDP Entity Configurable ATM Label Range Table. The purpose of this table is to provide a mechanism for specifying a contiguous range of vpi's with a contiguous range of vci's, or a 'label range' for LDP Entities. LDP Entities which use ATM must have at least one entry in this table.
.1.3.6.1.4.1.11.2.14.11.15.8.12.2.1.2.3.1,HPN-ICF-MPLS-LDP-MIB::hpnicfMplsLdpEntityConfAtmLabelRangeEntry,,not-accessible,hpnicfMplsLdpLsrIncarnID:hpnicfMplsLdpEntityIfIndex:hpnicfMplsLdpEntityConfAtmLabelRangeLowerBoundVPI:hpnicfMplsLdpEntityConfAtmLabelRangeLowerBoundVCI,current,,A row in the LDP Entity Configurable ATM Label Range Table. One entry in this table contains information on a single range of labels represented by the configured Upper and Lower Bounds VPI/VCI pairs. NOTE: The ranges for a specific LDP Entity are UNIQUE and non-overlapping. For example, for a specific LDP Entity index, there could be one entry having ConfLowerBound vpi/vci == 0/32, and ConfUpperBound vpi/vci == 0/100, and a second entry for this same interface with ConfLowerBound vpi/vci == 0/101 and ConfUpperBound vpi/vci == 0/200. However, there could not be a third entry with ConfLowerBound vpi/vci == 0/200 and ConfUpperBound vpi/vci == 0/300 because this label range overlaps with the second entry (i.e. both entries now have 0/200). A row will not be created unless a unique and non-overlapping range is specified. Thus, row creation implies a one-shot row creation of LDP EntityID and ConfLowerBound vpi/vci and ConfUpperBound vpi/vci. At least one label range entry for a specific LDP Entity MUST include the default VPI/VCI values denoted in the LDP Entity Table.
.1.3.6.1.4.1.11.2.14.11.15.8.12.2.1.2.3.1.1,HPN-ICF-MPLS-LDP-MIB::hpnicfMplsLdpEntityConfAtmLabelRangeLowerBoundVPI,INTEGER,not-accessible,,current,,The minimum VPI number configured for this range.
.1.3.6.1.4.1.11.2.14.11.15.8.12.2.1.2.3.1.2,HPN-ICF-MPLS-LDP-MIB::hpnicfMplsLdpEntityConfAtmLabelRangeLowerBoundVCI,INTEGER,not-accessible,,current,,The minimum VCI number configured for this range.
.1.3.6.1.4.1.11.2.14.11.15.8.12.2.1.2.3.1.3,HPN-ICF-MPLS-LDP-MIB::hpnicfMplsLdpEntityConfAtmLabelRangeUpperBoundVPI,INTEGER,read-create,,current,,The maximum VPI number configured for this range.
.1.3.6.1.4.1.11.2.14.11.15.8.12.2.1.2.3.1.4,HPN-ICF-MPLS-LDP-MIB::hpnicfMplsLdpEntityConfAtmLabelRangeUpperBoundVCI,INTEGER,read-create,,current,,The maximum VCI number configured for this range.
.1.3.6.1.4.1.11.2.14.11.15.8.12.2.1.2.3.1.5,HPN-ICF-MPLS-LDP-MIB::hpnicfMplsLdpEntityConfAtmLabelRangeRowStatus,INTEGER,read-create,,current,active(1):notInService(2):notReady(3):createAndGo(4):createAndWait(5):destroy(6),An object that allows entries in this table to be created and deleted using the RowStatus convention.
.1.3.6.1.4.1.11.2.14.11.15.8.12.2.1.2.4,HPN-ICF-MPLS-LDP-MIB::hpnicfMplsLdpEntityStatsTable,,not-accessible,,current,,This table is a read-only table which augments the MplsLdpConfEntityTable. The purpose of this table is to keep statistical information about the LDP Entities on the LSR.
.1.3.6.1.4.1.11.2.14.11.15.8.12.2.1.2.4.1,HPN-ICF-MPLS-LDP-MIB::hpnicfMplsLdpEntityStatsEntry,,not-accessible,,current,,A row in this table contains statistical information about an LDP Entity.
.1.3.6.1.4.1.11.2.14.11.15.8.12.2.1.2.4.1.1,HPN-ICF-MPLS-LDP-MIB::hpnicfMplsLdpAttemptedSessions,Counter32,read-only,,current,,A count of the total attempted sessions for this LDP Entity.
.1.3.6.1.4.1.11.2.14.11.15.8.12.2.1.3,HPN-ICF-MPLS-LDP-MIB::hpnicfMplsLdpPeerObjects,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.8.12.2.1.3.1,HPN-ICF-MPLS-LDP-MIB::hpnicfMplsLdpPeerTable,,not-accessible,,current,,Information about LDP peers which have been discovered by the LDP Entities that are managed by this agent.
.1.3.6.1.4.1.11.2.14.11.15.8.12.2.1.3.1.1,HPN-ICF-MPLS-LDP-MIB::hpnicfMplsLdpPeerEntry,,not-accessible,hpnicfMplsLdpLsrIncarnID:hpnicfMplsLdpEntityIfIndex:hpnicfMplsLdpPeerIndex,current,,Information about a single Peer.
.1.3.6.1.4.1.11.2.14.11.15.8.12.2.1.3.1.1.1,HPN-ICF-MPLS-LDP-MIB::hpnicfMplsLdpPeerIndex,Unsigned32,not-accessible,,current,,An identifier for the LDP peer that is unique within the scope of this agent.
.1.3.6.1.4.1.11.2.14.11.15.8.12.2.1.3.1.1.2,HPN-ICF-MPLS-LDP-MIB::hpnicfMplsLdpPeerID,OCTET,read-create,,current,,The LDP identifier of this LDP Peer.
.1.3.6.1.4.1.11.2.14.11.15.8.12.2.1.3.1.1.3,HPN-ICF-MPLS-LDP-MIB::hpnicfMplsLdpPeerInternetworkAddrType,INTEGER,read-create,,current,other(0):ipv4(1):ipv6(2):nsap(3):hdlc(4):bbn1822(5):ieee802(6):e163(7):e164(8):f69(9):x121(10):ipx(11):appleTalk(12):decnetIV(13):banyanVines(14):e164WithNsap(15),The type of the internetwork layer address of this LDP peer. This object indicates how the value of hpnicfMplsLdpPeerInternetworkAddr is to be interpreted.
.1.3.6.1.4.1.11.2.14.11.15.8.12.2.1.3.1.1.4,HPN-ICF-MPLS-LDP-MIB::hpnicfMplsLdpPeerInternetworkAddr,OCTET,read-create,,current,,The value of the internetwork layer address of this LDP peer.
.1.3.6.1.4.1.11.2.14.11.15.8.12.2.1.3.1.1.5,HPN-ICF-MPLS-LDP-MIB::hpnicfMplsLdpPeerDefaultMtu,INTEGER,read-create,,current,,The default maximum transmission unit (MTU) of the LDP Peer.
.1.3.6.1.4.1.11.2.14.11.15.8.12.2.1.3.1.1.6,HPN-ICF-MPLS-LDP-MIB::hpnicfMplsLdpPeerKeepAliveHoldTimer,INTEGER,read-create,,current,,The two octet unsigned non zero INTEGER that indicates the number of seconds that this Peer proposes for the value of the KeepAlive Interval.
.1.3.6.1.4.1.11.2.14.11.15.8.12.2.1.3.1.1.7,HPN-ICF-MPLS-LDP-MIB::hpnicfMplsLdpPeerLabelDistributionMethod,INTEGER,read-create,,current,downstreamOnDemand(1):downstreamUnsolicited(2),For any given LDP session, the method of label distribution must be specified.
.1.3.6.1.4.1.11.2.14.11.15.8.12.2.1.3.1.1.8,HPN-ICF-MPLS-LDP-MIB::hpnicfMplsLdpPeerType,INTEGER,read-create,,current,local(1):remote(2),Indicates whether a peer is a local peer or a remote peer
.1.3.6.1.4.1.11.2.14.11.15.8.12.2.1.3.1.1.9,HPN-ICF-MPLS-LDP-MIB::hpnicfMplsLdpPeerRowStatus,INTEGER,read-create,,current,active(1):notInService(2):notReady(3):createAndGo(4):createAndWait(5):destroy(6),An object that allows entries in this table to be created and deleted using the RowStatus convention.
.1.3.6.1.4.1.11.2.14.11.15.8.12.2.1.3.2,HPN-ICF-MPLS-LDP-MIB::hpnicfMplsLdpPeerConfAtmLabelRangeTable,,not-accessible,,current,,The MPLS LDP Peer Configurable ATM Label Range Table. The purpose of this table is to provide a mechanism for specifying a contiguous range of vpi's with a contiguous range of vci's, or a 'label range' for LDP Peers. LDP Peers which use ATM must have at least one entry in this table.
.1.3.6.1.4.1.11.2.14.11.15.8.12.2.1.3.2.1,HPN-ICF-MPLS-LDP-MIB::hpnicfMplsLdpPeerConfAtmLabelRangeEntry,,not-accessible,hpnicfMplsLdpLsrIncarnID:hpnicfMplsLdpEntityIfIndex:hpnicfMplsLdpPeerIndex:hpnicfMplsLdpPeerConfAtmLabelRangeLowerBoundVPI:hpnicfMplsLdpPeerConfAtmLabelRangeLowerBoundVCI,current,,A row in the LDP Peer Configurable ATM Label Range Table. One entry in this table contains information on a single range of labels represented by the configured Upper and Lower Bounds VPI/VCI pairs. NOTE: The ranges for a specific LDP Peer are UNIQUE and non-overlapping. For example, for a specific LDP Peer index, there could be one entry having ConfLowerBound vpi/vci == 0/32, and ConfUpperBound vpi/vci == 0/100, and a second entry for this same interface with ConfLowerBound vpi/vci == 0/101 and ConfUpperBound vpi/vci == 0/200. However, there could not be a third entry with ConfLowerBound vpi/vci == 0/200 and ConfUpperBound vpi/vci == 0/300 because this label range overlaps with the second entry (i.e. both entries now have 0/200). A row will not be created unless a unique and non-overlapping range is specified. Thus, row creation implies a one-shot row creation of LDP PeerIndex and ConfLowerBound vpi/vci and ConfUpperBound vpi/vci. At least one label range entry for a specific LDP Peer MUST include the default VPI/VCI values denoted in the LDP Peer Table.
.1.3.6.1.4.1.11.2.14.11.15.8.12.2.1.3.2.1.1,HPN-ICF-MPLS-LDP-MIB::hpnicfMplsLdpPeerConfAtmLabelRangeLowerBoundVPI,INTEGER,not-accessible,,current,,The minimum VPI number configured for this range.
.1.3.6.1.4.1.11.2.14.11.15.8.12.2.1.3.2.1.2,HPN-ICF-MPLS-LDP-MIB::hpnicfMplsLdpPeerConfAtmLabelRangeLowerBoundVCI,INTEGER,not-accessible,,current,,The minimum VCI number configured for this range.
.1.3.6.1.4.1.11.2.14.11.15.8.12.2.1.3.2.1.3,HPN-ICF-MPLS-LDP-MIB::hpnicfMplsLdpPeerConfAtmLabelRangeUpperBoundVPI,INTEGER,read-only,,current,,The maximum VPI number configured for this range.
.1.3.6.1.4.1.11.2.14.11.15.8.12.2.1.3.2.1.4,HPN-ICF-MPLS-LDP-MIB::hpnicfMplsLdpPeerConfAtmLabelRangeUpperBoundVCI,INTEGER,read-only,,current,,The maximum VCI number configured for this range.
.1.3.6.1.4.1.11.2.14.11.15.8.12.2.1.4,HPN-ICF-MPLS-LDP-MIB::hpnicfMplsLdpSessionObjects,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.8.12.2.1.4.1,HPN-ICF-MPLS-LDP-MIB::hpnicfMplsLdpSessionTable,,not-accessible,,current,,A table of Sessions between the LDP Entities and LDP Peers.
.1.3.6.1.4.1.11.2.14.11.15.8.12.2.1.4.1.1,HPN-ICF-MPLS-LDP-MIB::hpnicfMplsLdpSessionEntry,,not-accessible,hpnicfMplsLdpLsrIncarnID:hpnicfMplsLdpEntityIfIndex:hpnicfMplsLdpPeerIndex:hpnicfMplsLdpSessionIndex,current,,An entry in this table represents information on a single session between an LDP Entity and LDP Peer.
.1.3.6.1.4.1.11.2.14.11.15.8.12.2.1.4.1.1.1,HPN-ICF-MPLS-LDP-MIB::hpnicfMplsLdpSessionIndex,Unsigned32,not-accessible,,current,,An unique identifier for this entry such that it identifies a specific LDP Session.
.1.3.6.1.4.1.11.2.14.11.15.8.12.2.1.4.1.1.2,HPN-ICF-MPLS-LDP-MIB::hpnicfMplsLdpSessionID,OCTET,read-only,,current,,The LDP Session identifier.
.1.3.6.1.4.1.11.2.14.11.15.8.12.2.1.4.1.1.3,HPN-ICF-MPLS-LDP-MIB::hpnicfMplsLdpSessionProtocolVersion,INTEGER,read-only,,current,,The version of the LDP Protocol which this session is using.
.1.3.6.1.4.1.11.2.14.11.15.8.12.2.1.4.1.1.4,HPN-ICF-MPLS-LDP-MIB::hpnicfMplsLdpSessionKeepAliveHoldTimeRemaining,INTEGER,read-only,,current,,The keep alive hold time remaining for this session.
.1.3.6.1.4.1.11.2.14.11.15.8.12.2.1.4.1.1.5,HPN-ICF-MPLS-LDP-MIB::hpnicfMplsLdpSessionRole,INTEGER,read-only,,current,active(1):passive(2),An indication of whether the LDP Entity associated with this session is acting in an 'active' role or a 'passive' role.
.1.3.6.1.4.1.11.2.14.11.15.8.12.2.1.4.1.1.6,HPN-ICF-MPLS-LDP-MIB::hpnicfMplsLdpSessionState,INTEGER,read-only,,current,nonexistent(1):initialized(2):openrec(3):opensent(4):operational(5),The current state of the session, all of the states 1 - 5 are based on the state machine for session negotiation behavior.
.1.3.6.1.4.1.11.2.14.11.15.8.12.2.1.4.1.1.7,HPN-ICF-MPLS-LDP-MIB::hpnicfMplsLdpSessionAtmLabelRangeLowerBoundVPI,INTEGER,read-only,,current,,The minimum VPI number for this range.
.1.3.6.1.4.1.11.2.14.11.15.8.12.2.1.4.1.1.8,HPN-ICF-MPLS-LDP-MIB::hpnicfMplsLdpSessionAtmLabelRangeLowerBoundVCI,INTEGER,read-only,,current,,The minimum VCI number for this range.
.1.3.6.1.4.1.11.2.14.11.15.8.12.2.1.4.1.1.9,HPN-ICF-MPLS-LDP-MIB::hpnicfMplsLdpSessionAtmLabelRangeUpperBoundVPI,INTEGER,read-only,,current,,The maximum VPI number for this range.
.1.3.6.1.4.1.11.2.14.11.15.8.12.2.1.4.1.1.10,HPN-ICF-MPLS-LDP-MIB::hpnicfMplsLdpSessionAtmLabelRangeUpperBoundVCI,INTEGER,read-only,,current,,The maximum VCI number for this range.
.1.3.6.1.4.1.11.2.14.11.15.8.12.2.1.5,HPN-ICF-MPLS-LDP-MIB::hpnicfMplsLdpHelloAdjacencyObjects,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.8.12.2.1.5.1,HPN-ICF-MPLS-LDP-MIB::hpnicfMplsLdpHelloAdjacencyTable,,not-accessible,,current,,A table of Hello Adjacencies for Sessions.
.1.3.6.1.4.1.11.2.14.11.15.8.12.2.1.5.1.1,HPN-ICF-MPLS-LDP-MIB::hpnicfMplsLdpHelloAdjacencyEntry,,not-accessible,hpnicfMplsLdpLsrIncarnID:hpnicfMplsLdpEntityIfIndex:hpnicfMplsLdpPeerIndex:hpnicfMplsLdpSessionIndex:hpnicfMplsLdpHelloAdjacencyIndex,current,,Each row represents a single LDP Hello Adjacency. An LDP Session can have one or more Hello adjacencies.
.1.3.6.1.4.1.11.2.14.11.15.8.12.2.1.5.1.1.1,HPN-ICF-MPLS-LDP-MIB::hpnicfMplsLdpHelloAdjacencyIndex,Unsigned32,not-accessible,,current,,An identifier for the adjacency.
.1.3.6.1.4.1.11.2.14.11.15.8.12.2.1.5.1.1.2,HPN-ICF-MPLS-LDP-MIB::hpnicfMplsLdpHelloAdjacencyHoldTimeRemaining,INTEGER,read-only,,current,,The time remaining for this Hello Adjacency.
.1.3.6.1.4.1.11.2.14.11.15.8.12.2.1.6,HPN-ICF-MPLS-LDP-MIB::hpnicfMplsLdpCrlspTnlObjects,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.8.12.2.1.6.1,HPN-ICF-MPLS-LDP-MIB::hpnicfMplsLdpCrlspTnlTable,,not-accessible,,current,,The hpnicfMplsLdpCrlspTnlTable allows new CRLSP MPLS tunnels to be created. The ER hops associated with a CRLSP tunnel are to be configured using the hpnicfMplsLdpCrlspErHopTable.
.1.3.6.1.4.1.11.2.14.11.15.8.12.2.1.6.1.1,HPN-ICF-MPLS-LDP-MIB::hpnicfMplsLdpCrlspTnlEntry,,not-accessible,hpnicfMplsLdpLsrIncarnID:hpnicfMplsLdpCrlspTnlIndex,current,,An entry in this table represents an CRLSP MPLS tunnel. An entry can be created by a network administrator.
.1.3.6.1.4.1.11.2.14.11.15.8.12.2.1.6.1.1.1,HPN-ICF-MPLS-LDP-MIB::hpnicfMplsLdpCrlspTnlIndex,INTEGER,accessible-for-notify,,current,,Uniquely identifies this row.
.1.3.6.1.4.1.11.2.14.11.15.8.12.2.1.6.1.1.2,HPN-ICF-MPLS-LDP-MIB::hpnicfMplsLdpCrlspTnlName,OCTET,read-create,,current,,The 'canonical' name assigned to the tunnel that can be used to refer to it on the 'console' port.
.1.3.6.1.4.1.11.2.14.11.15.8.12.2.1.6.1.1.3,HPN-ICF-MPLS-LDP-MIB::hpnicfMplsLdpCrlspTnlDirection,INTEGER,read-create,,current,in(1):out(2):inOut(3),Whether this tunnel is unidirectional-incoming, unidirectional-outgoing, or bidirectional.
.1.3.6.1.4.1.11.2.14.11.15.8.12.2.1.6.1.1.4,HPN-ICF-MPLS-LDP-MIB::hpnicfMplsLdpCrlspTnlSignallingProto,INTEGER,read-create,,current,none(1):ldp(2):rsvp(3),The signaling protocol, if any, that set up this tunnel.
.1.3.6.1.4.1.11.2.14.11.15.8.12.2.1.6.1.1.5,HPN-ICF-MPLS-LDP-MIB::hpnicfMplsLdpCrlspTnlSetupPrio,INTEGER,read-create,,current,,The setup priority of this tunnel.
.1.3.6.1.4.1.11.2.14.11.15.8.12.2.1.6.1.1.6,HPN-ICF-MPLS-LDP-MIB::hpnicfMplsLdpCrlspTnlHoldingPrio,INTEGER,read-create,,current,,The holding priority for this tunnel.
.1.3.6.1.4.1.11.2.14.11.15.8.12.2.1.6.1.1.7,HPN-ICF-MPLS-LDP-MIB::hpnicfMplsLdpCrlspTnlPeakDataRate,INTEGER,read-create,,current,,The peak rate - the maximum rate at which traffic will be sent on the CRLSP.
.1.3.6.1.4.1.11.2.14.11.15.8.12.2.1.6.1.1.8,HPN-ICF-MPLS-LDP-MIB::hpnicfMplsLdpCrlspTnlPeakBurstSize,INTEGER,read-create,,current,,The peak burst size - the maximum burst size of the traffic that can  occur in the established CRLSP.
.1.3.6.1.4.1.11.2.14.11.15.8.12.2.1.6.1.1.9,HPN-ICF-MPLS-LDP-MIB::hpnicfMplsLdpCrlspTnlCommittedDataRate,INTEGER,read-create,,current,,The committed rate - the committed rate at which traffic will be sent on the CRLSP.
.1.3.6.1.4.1.11.2.14.11.15.8.12.2.1.6.1.1.10,HPN-ICF-MPLS-LDP-MIB::hpnicfMplsLdpCrlspTnlCommittedBurstSize,INTEGER,read-create,,current,,The committed burst size - the committed burst size of the traffic  that will be handled in the established CRLSP.
.1.3.6.1.4.1.11.2.14.11.15.8.12.2.1.6.1.1.11,HPN-ICF-MPLS-LDP-MIB::hpnicfMplsLdpCrlspTnlExcessBurstSize,INTEGER,read-create,,current,,The Excess burst size - the excess burst size limit to be used for traffic conditioning at the ingress of the CRLSP.
.1.3.6.1.4.1.11.2.14.11.15.8.12.2.1.6.1.1.12,HPN-ICF-MPLS-LDP-MIB::hpnicfMplsLdpCrlspTnlIsPinned,INTEGER,read-create,,current,true(1):false(2),Indicates whether the loose-routed hops of this tunnel are to be pinned.
.1.3.6.1.4.1.11.2.14.11.15.8.12.2.1.6.1.1.13,HPN-ICF-MPLS-LDP-MIB::hpnicfMplsLdpCrlspTnlFrequency,INTEGER,read-create,,current,,Indicates the frequency of usage of the established CRLSP.
.1.3.6.1.4.1.11.2.14.11.15.8.12.2.1.6.1.1.14,HPN-ICF-MPLS-LDP-MIB::hpnicfMplsLdpCrlspTnlWeight,INTEGER,read-create,,current,,Indicates the weight that is the established CRLSP.
.1.3.6.1.4.1.11.2.14.11.15.8.12.2.1.6.1.1.15,HPN-ICF-MPLS-LDP-MIB::hpnicfMplsLdpCrlspTnlRowStatus,INTEGER,read-create,,current,active(1):notInService(2):notReady(3):createAndGo(4):createAndWait(5):destroy(6),For controlling the state of this row. The status can be set to 'active' only when atleast one ERHOP is created in the hpnicfMplsLdpErHopTable, associated with this tunnel.
.1.3.6.1.4.1.11.2.14.11.15.8.12.2.1.6.2,HPN-ICF-MPLS-LDP-MIB::hpnicfMplsLdpCrlspErHopTable,,not-accessible,,current,,The hpnicfMplsLdpCrlspErHopTable is used to indicate the hops, strict or loose, for an MPLS CRLSP tunnel defined in hpnicfMplsLdpCrlspTnlTable.   There must be atleast one entry in this table for each CRLSP tunnel  that is supported in the hpnicfMplsLdpCrlspTnlTable.  The first row in the table is the first hop after the origination point of the tunnel.
.1.3.6.1.4.1.11.2.14.11.15.8.12.2.1.6.2.1,HPN-ICF-MPLS-LDP-MIB::hpnicfMplsLdpCrlspErHopEntry,,not-accessible,hpnicfMplsLdpLsrIncarnID:hpnicfMplsLdpCrlspTnlIndex:hpnicfMplsLdpCrlspErHopIndex,current,,An entry in this table represents a tunnel hop. An entry is created by a network administrator for signalled ERLSP set up by LDP or RSVP.
.1.3.6.1.4.1.11.2.14.11.15.8.12.2.1.6.2.1.1,HPN-ICF-MPLS-LDP-MIB::hpnicfMplsLdpCrlspErHopIndex,INTEGER,not-accessible,,current,,Secondary index into this table identifying the particular hop.
.1.3.6.1.4.1.11.2.14.11.15.8.12.2.1.6.2.1.2,HPN-ICF-MPLS-LDP-MIB::hpnicfMplsLdpCrlspErHopAddrType,INTEGER,read-create,,current,ipV4(1),Address type of this hop.
.1.3.6.1.4.1.11.2.14.11.15.8.12.2.1.6.2.1.3,HPN-ICF-MPLS-LDP-MIB::hpnicfMplsLdpCrlspErHopIpv4Addr,IpAddress,read-create,,current,,If hpnicfMplsLdpCrlspErHopAddrType is ipV4(1), IPv4 address of this hop. This object is not significant otherwise and should return a value of 0.
.1.3.6.1.4.1.11.2.14.11.15.8.12.2.1.6.2.1.4,HPN-ICF-MPLS-LDP-MIB::hpnicfMplsLdpCrlspErHopIpv4PrefixLen,INTEGER,read-create,,current,,If hpnicfMplsLdpCrlspErHopAddrType is ipV4(1), prefix length for this hop's IPv4 address. This object is not significant otherwise and should return a value of 0.
.1.3.6.1.4.1.11.2.14.11.15.8.12.2.1.6.2.1.5,HPN-ICF-MPLS-LDP-MIB::hpnicfMplsLdpCrlspErHopStrictOrLoose,INTEGER,read-create,,current,strict(1):loose(2),Whether this is a strict or loose hop.
.1.3.6.1.4.1.11.2.14.11.15.8.12.2.1.6.2.1.6,HPN-ICF-MPLS-LDP-MIB::hpnicfMplsLdpCrlspErHopRowStatus,INTEGER,read-create,,current,active(1):notInService(2):notReady(3):createAndGo(4):createAndWait(5):destroy(6),For creating, modifying and deleting this row.
.1.3.6.1.4.1.11.2.14.11.15.8.12.2.2,HPN-ICF-MPLS-LDP-MIB::hpnicfMplsLdpNotifications,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.8.12.2.2.0,HPN-ICF-MPLS-LDP-MIB::hpnicfMplsLdpNotificationPrefix,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.8.12.2.2.0.1,HPN-ICF-MPLS-LDP-MIB::hpnicfMplsLdpFailedInitSessionThresholdExceeded,,,,,,This notification is generated whenever the value of hpnicfMplsLdpEntityFailedInitSessionThreshold is exceeded.
.1.3.6.1.4.1.11.2.14.11.15.8.12.2.2.0.2,HPN-ICF-MPLS-LDP-MIB::hpnicfMplsLdpCrlspTunnelUp,,,,,,This notification is generated by the Ingress LSR of the CRLSP tunnel on the receipt of Label mapping message from the downstream LSR for the LAbel request sent for the CRLSP tunnel.
.1.3.6.1.4.1.11.2.14.11.15.8.12.2.2.0.3,HPN-ICF-MPLS-LDP-MIB::hpnicfMplsLdpCrlspTunnelDown,,,,,,This notification is generated when a CRLSP Row status is modified to destroy the CRLSP tunnel. - due to pre-emption etc.,
.1.3.6.1.4.1.11.2.14.11.15.8.12.2.2.0.4,HPN-ICF-MPLS-LDP-MIB::hpnicfMplsLdpCrlspTunnelSetupFailure,,,,,,This notification is generated by the Ingress LSR of the CRLSP tunnel on the receipt of Nak message from the downstream LSR for the Label request sent for the CRLSP tunnel. This can occur due to improper ER hop values being set, or Traffic resources not available etc.,
.1.3.6.1.4.1.11.2.14.11.15.8.12.2.2.0.11,HPN-ICF-MPLS-LDP-MIB::hpnicfMplsLdpIncarnUpEventFailure,,,,,,This notification is generated by LDP to notify  the Incarnation UP Event failure
.1.3.6.1.4.1.11.2.14.11.15.8.12.2.2.0.12,HPN-ICF-MPLS-LDP-MIB::hpnicfMplsLdpIncarnDownEventFailure,,,,,,This notification is generated by LDP to notify  the Incarnation DOWN Event failure
.1.3.6.1.4.1.11.2.14.11.15.8.12.2.2.0.13,HPN-ICF-MPLS-LDP-MIB::hpnicfMplsLdpEntityUpEventFailure,,,,,,This notification is generated by LDP to notify  the ENTITY UP Event failure
.1.3.6.1.4.1.11.2.14.11.15.8.12.2.2.0.14,HPN-ICF-MPLS-LDP-MIB::hpnicfMplsLdpEntityDownEventFailure,,,,,,This notification is generated by LDP to notify  the ENTITY DOWN Event failure
.1.3.6.1.4.1.11.2.14.11.15.8.12.2.2.0.15,HPN-ICF-MPLS-LDP-MIB::hpnicfMplsLdpSessionUpEventFailure,,,,,,Generation of this trap occurs when the  value of 'hpnicfMplsLdpSessionState' enters the 'operational(5)' state.
.1.3.6.1.4.1.11.2.14.11.15.8.12.2.2.0.16,HPN-ICF-MPLS-LDP-MIB::hpnicfMplsLdpSessionDownEventFailure,,,,,,Generation of this trap occurs when the  value of 'hpnicfMplsLdpSessionState' leaves  the 'operational(5)' state.
.1.3.6.1.4.1.11.2.14.11.15.8.12.3,HPN-ICF-OID-MIB::hpnicfMplsVpn,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.8.12.3.1,HPN-ICF-MPLS-BGP-VPN-MIB::hpnicfmplsVpnObjects,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.8.12.3.1.1,HPN-ICF-MPLS-BGP-VPN-MIB::hpnicfmplsVpnScalars,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.8.12.3.1.1.1,HPN-ICF-MPLS-BGP-VPN-MIB::hpnicfmplsVpnConfiguredVrfs,Unsigned32,read-only,,current,,The number of VRFs which are configured on this node.
.1.3.6.1.4.1.11.2.14.11.15.8.12.3.1.1.2,HPN-ICF-MPLS-BGP-VPN-MIB::hpnicfmplsVpnActiveVrfs,Unsigned32,read-only,,current,,The number of VRFs which are active on this node. That is, those whose operStatus = Up (1).
.1.3.6.1.4.1.11.2.14.11.15.8.12.3.1.2,HPN-ICF-MPLS-BGP-VPN-MIB::hpnicfmplsVpnConf,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.8.12.3.1.2.1,HPN-ICF-MPLS-BGP-VPN-MIB::hpnicfmplsVpnInterfaceConfTable,,not-accessible,,current,,This table specifies per-interface MPLS capability and associated information.
.1.3.6.1.4.1.11.2.14.11.15.8.12.3.1.2.1.1,HPN-ICF-MPLS-BGP-VPN-MIB::hpnicfmplsVpnInterfaceConfEntry,,not-accessible,hpnicfmplsVpnVrfName:hpnicfmplsVpnInterfaceConfIndex,current,,An entry in this table is created by an LSR for every interface capable of supporting MPLS/BGP VPN. Each entry in this table is meant to correspond to an entry in the Interfaces Table.
.1.3.6.1.4.1.11.2.14.11.15.8.12.3.1.2.1.1.1,HPN-ICF-MPLS-BGP-VPN-MIB::hpnicfmplsVpnInterfaceConfIndex,Integer32,read-only,,current,,This is a unique index for an entry in the hpnicfmplsVpnInterfaceConfTable.
.1.3.6.1.4.1.11.2.14.11.15.8.12.3.1.2.1.1.2,HPN-ICF-MPLS-BGP-VPN-MIB::hpnicfmplsVpnInterfaceLabelEdgeType,INTEGER,read-only,,current,providerEdge(1):customerEdge(2),Either the providerEdge(1) (PE) or customerEdge(2) (CE) bit MUST be set.
.1.3.6.1.4.1.11.2.14.11.15.8.12.3.1.2.1.1.3,HPN-ICF-MPLS-BGP-VPN-MIB::hpnicfmplsVpnInterfaceVpnClassification,INTEGER,read-only,,current,carrierOfCarrier(1):enterprise(2):interProvider(3),Denotes whether this link participates in a carrier-of-carrier's, enterprise, or inter-provider scenario.
.1.3.6.1.4.1.11.2.14.11.15.8.12.3.1.2.1.1.4,HPN-ICF-MPLS-BGP-VPN-MIB::hpnicfmplsVpnInterfaceIpAddress,OCTET,read-create,,current,,The IP address of this interface.
.1.3.6.1.4.1.11.2.14.11.15.8.12.3.1.2.1.1.5,HPN-ICF-MPLS-BGP-VPN-MIB::hpnicfmplsVpnInterfaceIpAddressMask,OCTET,read-create,,current,,The IP address mask of this interface.
.1.3.6.1.4.1.11.2.14.11.15.8.12.3.1.2.1.1.6,HPN-ICF-MPLS-BGP-VPN-MIB::hpnicfmplsVpnInterfaceConfRowStatus,INTEGER,read-create,,current,active(1):notInService(2):notReady(3):createAndGo(4):createAndWait(5):destroy(6),The row status for this entry. This value is used to create a row in this table, signifying that the specified interface is to be associated with the specified interface. If this operation suceeds, the interface will have been associated, otherwise the agent would not allow the association. If the agent only allows read-only operations on this table, it will create entries in this table as they are created.
.1.3.6.1.4.1.11.2.14.11.15.8.12.3.1.2.2,HPN-ICF-MPLS-BGP-VPN-MIB::hpnicfmplsVpnVrfConfTable,,not-accessible,,current,,This table specifies per-interface MPLS/BGP VPN VRF Table capability and associated information. Entries in this table define VRF routing instances associated with MPLS/VPN interfaces. Note that multiple interfaces can belong to the same VRF instance. The collection of all VRF instances comprises an actual VPN.
.1.3.6.1.4.1.11.2.14.11.15.8.12.3.1.2.2.1,HPN-ICF-MPLS-BGP-VPN-MIB::hpnicfmplsVpnVrfConfEntry,,not-accessible,hpnicfmplsVpnVrfName,current,,An entry in this table is created by an LSR for every VRF capable of supporting MPLS/BGP VPN. The indexing provides an ordering of VRFs per-VPN interface.
.1.3.6.1.4.1.11.2.14.11.15.8.12.3.1.2.2.1.1,HPN-ICF-MPLS-BGP-VPN-MIB::hpnicfmplsVpnVrfName,OCTET,read-only,,current,,The human-readable name of this VPN. This MAY be equivalent to the RFC2685 VPN-ID.
.1.3.6.1.4.1.11.2.14.11.15.8.12.3.1.2.2.1.2,HPN-ICF-MPLS-BGP-VPN-MIB::hpnicfmplsVpnVrfRouteDistinguisher,OCTET,read-create,,current,,The route distinguisher for this VRF.
.1.3.6.1.4.1.11.2.14.11.15.8.12.3.1.2.2.1.3,HPN-ICF-MPLS-BGP-VPN-MIB::hpnicfmplsVpnVrfNetPrefixType,INTEGER,read-only,,current,other(1):rip(2):ospf(3):isis(4):bgp(5):static(6),Denotes the type network prefix in use for the PE-CE connections. 
.1.3.6.1.4.1.11.2.14.11.15.8.12.3.1.2.2.1.4,HPN-ICF-MPLS-BGP-VPN-MIB::hpnicfmplsVpnVrfNetPrefix,OCTET,read-only,,current,,Denotes the network prefix for the PE-CE connections.
.1.3.6.1.4.1.11.2.14.11.15.8.12.3.1.2.2.1.5,HPN-ICF-MPLS-BGP-VPN-MIB::hpnicfmplsVpnVrfIpRouteRedistributeConn,INTEGER,read-create,,current,true(1):false(2),Denotes the redistribution of directly connected networks into the VRF BGP table.
.1.3.6.1.4.1.11.2.14.11.15.8.12.3.1.2.2.1.6,HPN-ICF-MPLS-BGP-VPN-MIB::hpnicfmplsVpnVrfIpRouteRedistributeStatic,INTEGER,read-create,,current,true(1):false(2),Denotes the redistribution of static routes into the VRF BGP table.
.1.3.6.1.4.1.11.2.14.11.15.8.12.3.1.2.2.1.7,HPN-ICF-MPLS-BGP-VPN-MIB::hpnicfmplsVpnVrfIpRouteRedistributeRip,INTEGER,read-create,,current,true(1):false(2),Denotes the redistribution of rip routes into the VRF BGP table.
.1.3.6.1.4.1.11.2.14.11.15.8.12.3.1.2.2.1.8,HPN-ICF-MPLS-BGP-VPN-MIB::hpnicfmplsVpnVrfConfHighRouteThreshold,Unsigned32,read-create,,current,,Denotes high-level water marker for the number of routes which this VRF may hold.
.1.3.6.1.4.1.11.2.14.11.15.8.12.3.1.2.2.1.9,HPN-ICF-MPLS-BGP-VPN-MIB::hpnicfmplsVpnVrfConfIsWarnOnly,INTEGER,read-create,,current,true(1):false(2),Denotes the action when the amount of VPN's routes exceed the hpnicfmplsVpnVrfConfHighRouteThreshold.
.1.3.6.1.4.1.11.2.14.11.15.8.12.3.1.2.2.1.10,HPN-ICF-MPLS-BGP-VPN-MIB::hpnicfmplsVpnVrfConfMaxRoutes,Unsigned32,read-create,,current,,Denotes maximum number of routes which this VRF is configured to hold. This value MUST be less than or equal to hpnicfmplsVrfMaxPossibleRoutes unless it is set to 0.
.1.3.6.1.4.1.11.2.14.11.15.8.12.3.1.2.2.1.11,HPN-ICF-MPLS-BGP-VPN-MIB::hpnicfmplsVpnVrfConfRowStatus,INTEGER,read-create,,current,active(1):notInService(2):notReady(3):createAndGo(4):createAndWait(5):destroy(6),This variable is used to create, modify, and/or delete a row in this table.
.1.3.6.1.4.1.11.2.14.11.15.8.12.3.1.2.3,HPN-ICF-MPLS-BGP-VPN-MIB::hpnicfmplsVpnVrfRouteTargetTable,,not-accessible,,current,,This table specifies per-VRF route target association. Each entry identifies a connectivity policy supported as part of a VPN.
.1.3.6.1.4.1.11.2.14.11.15.8.12.3.1.2.3.1,HPN-ICF-MPLS-BGP-VPN-MIB::hpnicfmplsVpnVrfRouteTargetEntry,,not-accessible,hpnicfmplsVpnVrfName:hpnicfmplsVpnVrfRouteTarget:hpnicfmplsVpnVrfRouteTargetType,current,, An entry in this table is created by an LSR for each route target configured for a VRF supporting a MPLS/BGP VPN instance. The indexing provides an ordering per-VRF instance.
.1.3.6.1.4.1.11.2.14.11.15.8.12.3.1.2.3.1.1,HPN-ICF-MPLS-BGP-VPN-MIB::hpnicfmplsVpnVrfRouteTarget,OCTET,read-only,,current,,The route target distribution policy.
.1.3.6.1.4.1.11.2.14.11.15.8.12.3.1.2.3.1.2,HPN-ICF-MPLS-BGP-VPN-MIB::hpnicfmplsVpnVrfRouteTargetType,INTEGER,read-only,,current,import(1):export(2),The route target export distribution type.
.1.3.6.1.4.1.11.2.14.11.15.8.12.3.1.2.3.1.3,HPN-ICF-MPLS-BGP-VPN-MIB::hpnicfmplsVpnVrfRouteTargetRowStatus,INTEGER,read-create,,current,active(1):notInService(2):notReady(3):createAndGo(4):createAndWait(5):destroy(6),Row status for this entry.
.1.3.6.1.4.1.11.2.14.11.15.8.12.3.1.2.4,HPN-ICF-MPLS-BGP-VPN-MIB::hpnicfmplsVpnVrfBgpNbrAddrTable,,not-accessible,,current,,This table specifies per-interface MPLS/BGP neighbor addresses for both PEs and CEs.
.1.3.6.1.4.1.11.2.14.11.15.8.12.3.1.2.4.1,HPN-ICF-MPLS-BGP-VPN-MIB::hpnicfmplsVpnVrfBgpNbrAddrEntry,,not-accessible,hpnicfmplsVpnVrfName:hpnicfmplsVpnVrfBgpNbrAddr,current,,An entry in this table is created by an LSR for every VRF capable of supporting MPLS/BGP VPN. The indexing provides an ordering of VRFs per-VPN interface.
.1.3.6.1.4.1.11.2.14.11.15.8.12.3.1.2.4.1.1,HPN-ICF-MPLS-BGP-VPN-MIB::hpnicfmplsVpnVrfBgpNbrAddr,OCTET,read-only,,current,,Denotes the BGP neighbor address.
.1.3.6.1.4.1.11.2.14.11.15.8.12.3.1.2.4.1.2,HPN-ICF-MPLS-BGP-VPN-MIB::hpnicfmplsVpnVrfBgpNbrRole,INTEGER,read-create,,current,ce(1):pe(2),Denotes the role played by this BGP neighbor with respect to this VRF.
.1.3.6.1.4.1.11.2.14.11.15.8.12.3.1.2.4.1.3,HPN-ICF-MPLS-BGP-VPN-MIB::hpnicfmplsVpnVrfBgpNbrType,INTEGER,read-create,,current,unknown(0):ipv4(1):ipv6(2):ipv4z(3):ipv6z(4):dns(16),Denotes the address family of the PE address.
.1.3.6.1.4.1.11.2.14.11.15.8.12.3.1.2.4.1.4,HPN-ICF-MPLS-BGP-VPN-MIB::hpnicfmplsVpnVrfBgpNbrAsNumber,Unsigned32,read-create,,current,,The Automonous System that the BGP's neighbour in.
.1.3.6.1.4.1.11.2.14.11.15.8.12.3.1.2.4.1.5,HPN-ICF-MPLS-BGP-VPN-MIB::hpnicfmplsVpnVrfBgpNbrAdminStatus,INTEGER,read-create,,current,mplsVpnVrfBgpNbrSetUp(1):mplsVpnVrfBgpNbrSetDown(2),The action set by SNMP client.
.1.3.6.1.4.1.11.2.14.11.15.8.12.3.1.2.4.1.6,HPN-ICF-MPLS-BGP-VPN-MIB::hpnicfmplsVpnVrfBgpNbrRowStatus,INTEGER,read-create,,current,active(1):notInService(2):notReady(3):createAndGo(4):createAndWait(5):destroy(6),This variable is used to create, modify, and/or delete a row in this table.
.1.3.6.1.4.1.11.2.14.11.15.8.12.3.1.3,HPN-ICF-MPLS-BGP-VPN-MIB::hpnicfmplsVpnRoute,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.8.12.3.1.3.1,HPN-ICF-MPLS-BGP-VPN-MIB::hpnicfmplsVpnVrfRouteTable,,not-accessible,,current,,This table specifies per-interface MPLS/BGP VPN VRF Table routing information. Entries in this table define VRF routing entries associated with the specified MPLS/VPN interfaces. Note that this table contains both BGP and IGP routes, as both may appear in the same VRF.
.1.3.6.1.4.1.11.2.14.11.15.8.12.3.1.3.1.1,HPN-ICF-MPLS-BGP-VPN-MIB::hpnicfmplsVpnVrfRouteEntry,,not-accessible,hpnicfmplsVpnVrfName:hpnicfmplsVpnVrfRouteDest:hpnicfmplsVpnVrfRouteMask:hpnicfmplsVpnVrfRouteNextHop,current,,An entry in this table is created by an LSR for every route present configured (either dynamically or statically) within the context of a specific VRF capable of supporting MPLS/BGP VPN. The indexing provides an ordering of VRFs per-VPN interface.
.1.3.6.1.4.1.11.2.14.11.15.8.12.3.1.3.1.1.1,HPN-ICF-MPLS-BGP-VPN-MIB::hpnicfmplsVpnVrfRouteDest,OCTET,read-only,,current,,The destination IP address of this route. This object may not take a Multicast (Class D) address value.
.1.3.6.1.4.1.11.2.14.11.15.8.12.3.1.3.1.1.2,HPN-ICF-MPLS-BGP-VPN-MIB::hpnicfmplsVpnVrfRouteMask,OCTET,read-create,,current,,Indicate the mask to be logical-ANDed with the destination address before being compared to the value in the hpnicfmplsVpnVrfRouteDest field. For those systems that do not support arbitrary subnet masks, an agent constructs the value of the hpnicfmplsVpnVrfRouteMask by reference to the IP Address Class. Any assignment (implicit or otherwise) of an instance of this object to a value x must be rejected if the bit-wise logical-AND of x with the value of the corresponding instance of the hpnicfmplsVpnVrfRouteDest object is not equal to hpnicfmplsVpnVrfRouteDest.
.1.3.6.1.4.1.11.2.14.11.15.8.12.3.1.3.1.1.3,HPN-ICF-MPLS-BGP-VPN-MIB::hpnicfmplsVpnVrfRouteNextHop,OCTET,read-only,,current,,On remote routes, the address of the next system en route; Otherwise, 0.0.0.0. .
.1.3.6.1.4.1.11.2.14.11.15.8.12.3.1.3.1.1.4,HPN-ICF-MPLS-BGP-VPN-MIB::hpnicfmplsVpnVrfRouteIfIndex,Integer32,read-create,,current,,The ifIndex value that identifies the local interface through which the next hop of this route should be reached.
.1.3.6.1.4.1.11.2.14.11.15.8.12.3.1.3.1.1.5,HPN-ICF-MPLS-BGP-VPN-MIB::hpnicfmplsVpnVrfRouteProto,INTEGER,read-create,,current,other(1):local(2):netmgmt(3):icmp(4):egp(5):ggp(6):hello(7):rip(8):isIs(9):esIs(10):ciscoIgrp(11):bbnSpfIgp(12):ospf(13):bgp(14):idpr(15):ciscoEigrp(16),The routing mechanism via which this route was learned. Inclusion of values for gateway rout- ing protocols is not intended to imply that hosts should support those protocols.
.1.3.6.1.4.1.11.2.14.11.15.8.12.3.1.3.1.1.6,HPN-ICF-MPLS-BGP-VPN-MIB::hpnicfmplsVpnVrfRouteRowStatus,INTEGER,read-create,,current,active(1):notInService(2):notReady(3):createAndGo(4):createAndWait(5):destroy(6),Row status for this table. It is used according to row installation and removal conventions.
.1.3.6.1.4.1.11.2.14.11.15.8.13,HPN-ICF-OID-MIB::hpnicfTRNG,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.8.13.1,HPN-ICF-TRNG-MIB::hpnicfTRNGMibObjects,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.8.13.1.1,HPN-ICF-TRNG-MIB::hpnicfTrngCreateTimerangeTable,,not-accessible,,current,,Creat TimeRange.
.1.3.6.1.4.1.11.2.14.11.15.8.13.1.1.1,HPN-ICF-TRNG-MIB::hpnicfTrngCreateTimerangeEntry,,not-accessible,hpnicfTrngIndex,current,,Define the entry of hpnicfTrngCreateTimerangeTable
.1.3.6.1.4.1.11.2.14.11.15.8.13.1.1.1.1,HPN-ICF-TRNG-MIB::hpnicfTrngIndex,Integer32,not-accessible,,current,,TimeRange's index
.1.3.6.1.4.1.11.2.14.11.15.8.13.1.1.1.2,HPN-ICF-TRNG-MIB::hpnicfTrngName,OCTET,read-create,,current,,TimeRange's name
.1.3.6.1.4.1.11.2.14.11.15.8.13.1.1.1.3,HPN-ICF-TRNG-MIB::hpnicfTrngValidFlag,INTEGER,read-only,,current,true(1):false(2),Valid or Invalid flag
.1.3.6.1.4.1.11.2.14.11.15.8.13.1.1.1.4,HPN-ICF-TRNG-MIB::hpnicfTrngCreateRowStatus,INTEGER,read-create,,current,active(1):notInService(2):notReady(3):createAndGo(4):createAndWait(5):destroy(6),The status of this conceptual row.Now only realize CreateAndGo and Destroy and Active.
.1.3.6.1.4.1.11.2.14.11.15.8.13.1.2,HPN-ICF-TRNG-MIB::hpnicfTrngAbsoluteTable,,not-accessible,,current,,Creat absoluteness time item of the TimeRange
.1.3.6.1.4.1.11.2.14.11.15.8.13.1.2.1,HPN-ICF-TRNG-MIB::hpnicfTrngAbsoluteEntry,,not-accessible,hpnicfTrngAbsoluteNameIndex:hpnicfTrngAbsoluteSubIndex,current,,Define the entry of hpnicfTrngAbsoluteTable
.1.3.6.1.4.1.11.2.14.11.15.8.13.1.2.1.1,HPN-ICF-TRNG-MIB::hpnicfTrngAbsoluteNameIndex,Integer32,not-accessible,,current,,TimeRange's index
.1.3.6.1.4.1.11.2.14.11.15.8.13.1.2.1.2,HPN-ICF-TRNG-MIB::hpnicfTrngAbsoluteSubIndex,Integer32,not-accessible,,current,,SubItem's index
.1.3.6.1.4.1.11.2.14.11.15.8.13.1.2.1.3,HPN-ICF-TRNG-MIB::hpnicfTimerangeAbsoluteStartTime,OCTET,read-create,,current,,Start point of the timerange.The format defined like 'YYYY-MM-DD,hh:mm:0.0'.
.1.3.6.1.4.1.11.2.14.11.15.8.13.1.2.1.4,HPN-ICF-TRNG-MIB::hpnicfTimerangeAbsoluteEndTime,OCTET,read-create,,current,,End point of the timerange.The format defined like 'YYYY-MM-DD,hh:mm:0.0'.
.1.3.6.1.4.1.11.2.14.11.15.8.13.1.2.1.5,HPN-ICF-TRNG-MIB::hpnicfTimerangeAbsolueRowStatus,INTEGER,read-create,,current,active(1):notInService(2):notReady(3):createAndGo(4):createAndWait(5):destroy(6),The status of this conceptual row. Now only realize CreateAndGo and Destroy and Active.
.1.3.6.1.4.1.11.2.14.11.15.8.13.1.3,HPN-ICF-TRNG-MIB::hpnicfTrngPeriodicTable,,not-accessible,,current,,Creat periodic time item of the TimeRange
.1.3.6.1.4.1.11.2.14.11.15.8.13.1.3.1,HPN-ICF-TRNG-MIB::hpnicfTrngPeriodicEntry,,not-accessible,hpnicfTrngPeriodicNameIndex:hpnicfTrngPeriodicSubIndex,current,,Define the index of hpnicfTrngPeriodicTable
.1.3.6.1.4.1.11.2.14.11.15.8.13.1.3.1.1,HPN-ICF-TRNG-MIB::hpnicfTrngPeriodicNameIndex,Integer32,not-accessible,,current,,TimeRange's index
.1.3.6.1.4.1.11.2.14.11.15.8.13.1.3.1.2,HPN-ICF-TRNG-MIB::hpnicfTrngPeriodicSubIndex,Integer32,not-accessible,,current,,SubItem's index
.1.3.6.1.4.1.11.2.14.11.15.8.13.1.3.1.3,HPN-ICF-TRNG-MIB::hpnicfTrngPeriodicDayOfWeek,BITS,read-create,,current,sunday(0):monday(1):tuesday(2):wednesday(3):thursday(4):friday(5):saturday(6),The day of week. This is a bit-map of possible conditions. The various bit positions are: |0 |sunday | |1 |monday | |2 |tuesday | |3 |wednesday | |4 |thursday | |5 |friday | |6 |saturday | 
.1.3.6.1.4.1.11.2.14.11.15.8.13.1.3.1.4,HPN-ICF-TRNG-MIB::hpnicfTimerangePeriodicStartTime,OCTET,read-create,,current,,Start point of this timerange,The format defined like 'hh:mm:0,0'.
.1.3.6.1.4.1.11.2.14.11.15.8.13.1.3.1.5,HPN-ICF-TRNG-MIB::hpnicfTimerangePeriodicEndTime,OCTET,read-create,,current,,End point of this timerange. The format definedlike 'hh:mm:0,0'.
.1.3.6.1.4.1.11.2.14.11.15.8.13.1.3.1.6,HPN-ICF-TRNG-MIB::hpnicfTimerangePeriodicRowStatus,INTEGER,read-create,,current,active(1):notInService(2):notReady(3):createAndGo(4):createAndWait(5):destroy(6),The status of this conceptual row, Now only realize CreateAndGo and Destroy and Active.
.1.3.6.1.4.1.11.2.14.11.15.8.13.3,HPN-ICF-TRNG-MIB::hpnicfTRNGMibConformance,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.8.13.3.1,HPN-ICF-TRNG-MIB::hpnicfTRNGMibCompliances,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.8.13.3.1.1,HPN-ICF-TRNG-MIB::hpnicfTRNGMibCompliance,,,,,,The compliance statement for entities which implement the Time-range MIB.
.1.3.6.1.4.1.11.2.14.11.15.8.13.3.2,HPN-ICF-TRNG-MIB::hpnicfTRNGMibGroups,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.8.13.3.2.1,HPN-ICF-TRNG-MIB::hpnicfTRNGGroup,,,,,,A collection of objects providing mandatory time-range information.
.1.3.6.1.4.1.11.2.14.11.15.8.18,HPN-ICF-OID-MIB::hpnicfUserLogMIB,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.8.18.1,HPN-ICF-USERLOG-MIB::hpnicfUserlogObjects,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.8.18.1.1,HPN-ICF-USERLOG-MIB::hpnicfUserlogNatObjects,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.8.18.1.1.1,HPN-ICF-USERLOG-MIB::hpnicfUserlogNatVersion,Integer32,read-only,,current,,NAT LOG version. Currently only version 1 is developed.
.1.3.6.1.4.1.11.2.14.11.15.8.18.1.1.2,HPN-ICF-USERLOG-MIB::hpnicfUserlogNatSyslog,Integer32,read-write,,current,, NAT LOG format. If 1, LOG format is sysLog. If 0, LOG format is UDP packet. UDP packet is the default format, and is recommended. 
.1.3.6.1.4.1.11.2.14.11.15.8.18.1.1.3,HPN-ICF-USERLOG-MIB::hpnicfUserlogNatSourceIP,IpAddress,read-write,,current,,The Source IP address of NAT LOG UDP packet.
.1.3.6.1.4.1.11.2.14.11.15.8.18.1.1.4,HPN-ICF-USERLOG-MIB::hpnicfUserlogNatFlowBegin,Integer32,read-write,,current,, Log the NAT flow when it is created. If 1, this function is enabled. If 0, this function is disabled. This function will be used when real-time monitor required. 
.1.3.6.1.4.1.11.2.14.11.15.8.18.1.1.5,HPN-ICF-USERLOG-MIB::hpnicfUserlogNatActiveTime,Integer32,read-write,,current,, The active time for long-time existed NAT flow. Unit: minute. Range: 10 minutes ~ 120 minutes. When setting it, NAT flow can be logged after an interval of active time. This function will be used when real-time monitor required. The default value 0 means real-time monitor function is disabled. 
.1.3.6.1.4.1.11.2.14.11.15.8.18.1.1.6,HPN-ICF-USERLOG-MIB::hpnicfUserlogNatSlotCfgInfoTable,,not-accessible,,current,,A table of NAT LOG configuration information for the specified slot.
.1.3.6.1.4.1.11.2.14.11.15.8.18.1.1.6.1,HPN-ICF-USERLOG-MIB::hpnicfUserlogNatSlotCfgInfoEntry,,not-accessible,hpnicfUserlogNatCfgSlotNumber,current,,NAT LOG Configuration Information Entry for a slot.
.1.3.6.1.4.1.11.2.14.11.15.8.18.1.1.6.1.1,HPN-ICF-USERLOG-MIB::hpnicfUserlogNatCfgSlotNumber,Integer32,read-only,,current,,Slot number. Specify which slot is configured with NAT LOG. 
.1.3.6.1.4.1.11.2.14.11.15.8.18.1.1.6.1.2,HPN-ICF-USERLOG-MIB::hpnicfUserlogNatEnable,Integer32,read-write,,current,, The NAT LOG feature Enable status. If 1, NAT LOG is enbled. If 0, NAT LOG is disabled. 
.1.3.6.1.4.1.11.2.14.11.15.8.18.1.1.6.1.3,HPN-ICF-USERLOG-MIB::hpnicfUserlogNatAclNumber,Integer32,read-write,,current,, Access-list number. The value 0 means no ACL is specified. Only when NAT LOG is enabled, can ACL be configured. Only NAT flow which match the ACL will be logged. 
.1.3.6.1.4.1.11.2.14.11.15.8.18.1.1.6.1.4,HPN-ICF-USERLOG-MIB::hpnicfUserlogNatHostAddress,IpAddress,read-write,,current,,The IP address of NAT LOG server. 
.1.3.6.1.4.1.11.2.14.11.15.8.18.1.1.6.1.5,HPN-ICF-USERLOG-MIB::hpnicfUserlogNatUdpPort,Integer32,read-write,,current,,The UDP Port Number of NAT LOG UDP packet.
.1.3.6.1.4.1.11.2.14.11.15.8.18.1.1.7,HPN-ICF-USERLOG-MIB::hpnicfUserlogNatSlotRunInfoTable,,not-accessible,,current,,A table of NAT LOG running information for the specified slot.
.1.3.6.1.4.1.11.2.14.11.15.8.18.1.1.7.1,HPN-ICF-USERLOG-MIB::hpnicfUserlogNatSlotRunInfoEntry,,not-accessible,hpnicfUserlogNatRunSlotNumber,current,,NAT LOG Running Information Entry for a slot.
.1.3.6.1.4.1.11.2.14.11.15.8.18.1.1.7.1.1,HPN-ICF-USERLOG-MIB::hpnicfUserlogNatRunSlotNumber,Integer32,read-only,,current,,Slot number. Specify on which slot the NAT LOG statistics displayed.
.1.3.6.1.4.1.11.2.14.11.15.8.18.1.1.7.1.2,HPN-ICF-USERLOG-MIB::hpnicfUserlogNatTotalEntries,Counter32,read-only,,current,,The total number of NAT flow entries which are logged.
.1.3.6.1.4.1.11.2.14.11.15.8.18.1.1.7.1.3,HPN-ICF-USERLOG-MIB::hpnicfUserlogNatTotalPackets,Counter32,read-only,,current,,The total number of NAT LOG UDP packets generated by the router.
.1.3.6.1.4.1.11.2.14.11.15.8.18.1.1.7.1.4,HPN-ICF-USERLOG-MIB::hpnicfUserlogNatFailedEntries,Counter32,read-only,,current,,The total number of NAT flow entries failed in outputting.
.1.3.6.1.4.1.11.2.14.11.15.8.18.1.1.7.1.5,HPN-ICF-USERLOG-MIB::hpnicfUserlogNatFailedPackets,Counter32,read-only,,current,,The total number of NAT LOG UDP packets failed in outputting.
.1.3.6.1.4.1.11.2.14.11.15.8.18.1.1.7.1.6,HPN-ICF-USERLOG-MIB::hpnicfUserlogNatClearRunStat,Integer32,read-write,,current,, Clear the running statistics for NAT LOG. Write-only. If 1, the running statistics for NAT LOG is resetted. Other value is invalid. 
.1.3.6.1.4.1.11.2.14.11.15.8.18.1.2,HPN-ICF-USERLOG-MIB::hpnicfUserlogFlowObjects,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.8.18.1.2.1,HPN-ICF-USERLOG-MIB::hpnicfUserlogFlowVersion,Integer32,read-only,,current,,BAS FLOW LOG version. Currently only version 1 is developed.
.1.3.6.1.4.1.11.2.14.11.15.8.18.1.2.2,HPN-ICF-USERLOG-MIB::hpnicfUserlogFlowSyslog,Integer32,read-write,,current,, BAS FLOW LOG format. If 1, LOG format is sysLog. If 0, LOG format is UDP packet. UDP packet is the default format, and is recommended. 
.1.3.6.1.4.1.11.2.14.11.15.8.18.1.2.3,HPN-ICF-USERLOG-MIB::hpnicfUserlogFlowSourceIP,IpAddress,read-write,,current,,The Source IP address of BAS FLOW LOG UDP packet.
.1.3.6.1.4.1.11.2.14.11.15.8.18.1.2.4,HPN-ICF-USERLOG-MIB::hpnicfUserlogFlowFlowBegin,Integer32,read-write,,current,, Log the BAS flow when it is created. If 1, this function is enabled. If 0, this function is disabled. This function will be used when real-time monitor required. 
.1.3.6.1.4.1.11.2.14.11.15.8.18.1.2.5,HPN-ICF-USERLOG-MIB::hpnicfUserlogFlowActiveTime,Integer32,read-write,,current,, The active time for long-time existed BAS flow. Unit: minute. Range: 10 minutes ~ 120 minutes. When setting it, BAS flow can be logged after an internal of active time. This function will be used when real-time monitor required. The default value 0 means real-time monitor function is disabled. 
.1.3.6.1.4.1.11.2.14.11.15.8.18.1.2.6,HPN-ICF-USERLOG-MIB::hpnicfUserlogFlowSlotCfgInfoTable,,not-accessible,,current,,A table of BAS FLOW LOG configuration information for the specified slot.
.1.3.6.1.4.1.11.2.14.11.15.8.18.1.2.6.1,HPN-ICF-USERLOG-MIB::hpnicfUserlogFlowSlotCfgInfoEntry,,not-accessible,hpnicfUserlogFlowCfgSlotNumber,current,,BAS FLOW LOG Configuration Information Entry for a slot.
.1.3.6.1.4.1.11.2.14.11.15.8.18.1.2.6.1.1,HPN-ICF-USERLOG-MIB::hpnicfUserlogFlowCfgSlotNumber,Integer32,read-only,,current,,Slot number. Specify which slot is configured with BAS FLOW LOG.
.1.3.6.1.4.1.11.2.14.11.15.8.18.1.2.6.1.2,HPN-ICF-USERLOG-MIB::hpnicfUserlogFlowEnable,Integer32,read-write,,current,, The BAS FLOW LOG feature Enable status. If 1, BAS FLOW LOG is enbled. If 0, BAS FLOW LOG is disabled. 
.1.3.6.1.4.1.11.2.14.11.15.8.18.1.2.6.1.3,HPN-ICF-USERLOG-MIB::hpnicfUserlogFlowAclNumber,Integer32,read-write,,current,, Access-list number. The value 0 means no ACL is specified. Only when BAS FLOW LOG is enabled, can ACL be configured. Only BAS flow which match the ACL will be logged. 
.1.3.6.1.4.1.11.2.14.11.15.8.18.1.2.6.1.4,HPN-ICF-USERLOG-MIB::hpnicfUserlogFlowHostAddress,IpAddress,read-write,,current,,The IP address of BAS FLOW LOG server. 
.1.3.6.1.4.1.11.2.14.11.15.8.18.1.2.6.1.5,HPN-ICF-USERLOG-MIB::hpnicfUserlogFlowUdpPort,Integer32,read-write,,current,,The UDP Port Number of BAS FLOW LOG UDP packet.
.1.3.6.1.4.1.11.2.14.11.15.8.18.1.2.7,HPN-ICF-USERLOG-MIB::hpnicfUserlogFlowSlotRunInfoTable,,not-accessible,,current,,A table of BAS FLOW LOG running information for the specified slot.
.1.3.6.1.4.1.11.2.14.11.15.8.18.1.2.7.1,HPN-ICF-USERLOG-MIB::hpnicfUserlogFlowSlotRunInfoEntry,,not-accessible,hpnicfUserlogFlowRunSlotNumber,current,,Running Information Entry for a slot.
.1.3.6.1.4.1.11.2.14.11.15.8.18.1.2.7.1.1,HPN-ICF-USERLOG-MIB::hpnicfUserlogFlowRunSlotNumber,Integer32,read-only,,current,,Slot number. Specify on which slot the BAS FLOW LOG statistics displayed.
.1.3.6.1.4.1.11.2.14.11.15.8.18.1.2.7.1.2,HPN-ICF-USERLOG-MIB::hpnicfUserlogFlowTotalEntries,Counter32,read-only,,current,,The total number of BAS FLOW Entries which are logged.
.1.3.6.1.4.1.11.2.14.11.15.8.18.1.2.7.1.3,HPN-ICF-USERLOG-MIB::hpnicfUserlogFlowTotalPackets,Counter32,read-only,,current,,The total number of FLOW LOG UDP packet generated by the router.
.1.3.6.1.4.1.11.2.14.11.15.8.18.1.2.7.1.4,HPN-ICF-USERLOG-MIB::hpnicfUserlogFlowFailedEntries,Counter32,read-only,,current,,The total number of BAS FLOW entries failed in outputting. 
.1.3.6.1.4.1.11.2.14.11.15.8.18.1.2.7.1.5,HPN-ICF-USERLOG-MIB::hpnicfUserlogFlowFailedPackets,Counter32,read-only,,current,,The total number of BAS FLOW LOG UDP packet failed in outputting.
.1.3.6.1.4.1.11.2.14.11.15.8.18.1.2.7.1.6,HPN-ICF-USERLOG-MIB::hpnicfUserlogFlowClearRunStat,Integer32,read-write,,current,, Clear the running statistics for FLOW LOG. Write-only. If 1, the running statistics for FLOW LOG is resetted. Other value is invalid. 
.1.3.6.1.4.1.11.2.14.11.15.8.18.1.3,HPN-ICF-USERLOG-MIB::hpnicfUserlogAccessObjects,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.8.18.1.3.1,HPN-ICF-USERLOG-MIB::hpnicfUserlogAccessVersion,Integer32,read-only,,current,,BAS ACCESS LOG version. Currently only version 1 is developed.
.1.3.6.1.4.1.11.2.14.11.15.8.18.1.3.2,HPN-ICF-USERLOG-MIB::hpnicfUserlogAccessSyslog,Integer32,read-write,,current,, BAS ACCESS LOG format. If 1, LOG format is sysLog; If 0, LOG format is UDP packet. UDP packet is the default format, and is recommended. 
.1.3.6.1.4.1.11.2.14.11.15.8.18.1.3.3,HPN-ICF-USERLOG-MIB::hpnicfUserlogAccessSourceIP,IpAddress,read-write,,current,,The Source IP address of BAS ACCESS LOG UDP packet.
.1.3.6.1.4.1.11.2.14.11.15.8.18.1.3.4,HPN-ICF-USERLOG-MIB::hpnicfUserlogAccessSlotCfgInfoTable,,not-accessible,,current,,A table of BAS ACCESS LOG configuration information for the specified slot.
.1.3.6.1.4.1.11.2.14.11.15.8.18.1.3.4.1,HPN-ICF-USERLOG-MIB::hpnicfUserlogAccessSlotCfgInfoEntry,,not-accessible,hpnicfUserlogAccessCfgSlotNumber,current,,BAS ACCESS LOG Configuration Information Entry for a slot.
.1.3.6.1.4.1.11.2.14.11.15.8.18.1.3.4.1.1,HPN-ICF-USERLOG-MIB::hpnicfUserlogAccessCfgSlotNumber,Integer32,read-only,,current,,Slot number. Specify which slot is configured with BAS ACCESS LOG.
.1.3.6.1.4.1.11.2.14.11.15.8.18.1.3.4.1.2,HPN-ICF-USERLOG-MIB::hpnicfUserlogAccessEnable,Integer32,read-write,,current,, The BAS ACCESS LOG feature Enable status. If 1, BAS ACCESS LOG is enbled. If 0, BAS ACCESS LOG is disabled. 
.1.3.6.1.4.1.11.2.14.11.15.8.18.1.3.4.1.3,HPN-ICF-USERLOG-MIB::hpnicfUserlogAccessHostAddress,IpAddress,read-write,,current,,The IP address of BAS ACCESS LOG server.
.1.3.6.1.4.1.11.2.14.11.15.8.18.1.3.4.1.4,HPN-ICF-USERLOG-MIB::hpnicfUserlogAccessUdpPort,Integer32,read-write,,current,,The UDP Port Number of BAS ACCESS LOG UDP packet.
.1.3.6.1.4.1.11.2.14.11.15.8.18.1.3.5,HPN-ICF-USERLOG-MIB::hpnicfUserlogAccessSlotRunInfoTable,,not-accessible,,current,,A table of BAS ACCESS LOG running information for the specified slot.
.1.3.6.1.4.1.11.2.14.11.15.8.18.1.3.5.1,HPN-ICF-USERLOG-MIB::hpnicfUserlogAccessSlotRunInfoEntry,,not-accessible,hpnicfUserlogAccessRunSlotNumber,current,,Running Information Entry for a slot.
.1.3.6.1.4.1.11.2.14.11.15.8.18.1.3.5.1.1,HPN-ICF-USERLOG-MIB::hpnicfUserlogAccessRunSlotNumber,Integer32,read-only,,current,,Slot number. Specify on which slot the BAS ACCESS LOG statistics displayed.
.1.3.6.1.4.1.11.2.14.11.15.8.18.1.3.5.1.2,HPN-ICF-USERLOG-MIB::hpnicfUserlogAccessTotalEntries,Counter32,read-only,,current,,The total number of BAS ACCESS Records which are logged.
.1.3.6.1.4.1.11.2.14.11.15.8.18.1.3.5.1.3,HPN-ICF-USERLOG-MIB::hpnicfUserlogAccessTotalPackets,Counter32,read-only,,current,,The total number of ACCESS LOG UDP packet generated by the router.
.1.3.6.1.4.1.11.2.14.11.15.8.18.1.3.5.1.4,HPN-ICF-USERLOG-MIB::hpnicfUserlogAccessFailedEntries,Counter32,read-only,,current,,The total number of BAS ACCESS entries failed in outputting.
.1.3.6.1.4.1.11.2.14.11.15.8.18.1.3.5.1.5,HPN-ICF-USERLOG-MIB::hpnicfUserlogAccessFailedPackets,Counter32,read-only,,current,,The total number of BAS ACCESS LOG UDP packet failed in outputting.
.1.3.6.1.4.1.11.2.14.11.15.8.18.1.3.5.1.6,HPN-ICF-USERLOG-MIB::hpnicfUserlogAccessClearRunStat,Integer32,read-write,,current,, Clear the running statistics for ACCESS LOG. Write-only. If 1, the running statistics for ACCESS LOG is resetted. Other value is invalid. 
.1.3.6.1.4.1.11.2.14.11.15.8.18.2,HPN-ICF-USERLOG-MIB::hpnicfUserlogNotifications,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.8.18.3,HPN-ICF-USERLOG-MIB::hpnicfUserlogConformance,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.8.18.3.1,HPN-ICF-USERLOG-MIB::hpnicfUserlogCompliances,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.8.18.3.1.1,HPN-ICF-USERLOG-MIB::hpnicfUserlogCompliance,,,,,,The compliance statement for entities which implement the Userlog mib.
.1.3.6.1.4.1.11.2.14.11.15.8.18.3.2,HPN-ICF-USERLOG-MIB::hpnicfUserlogGroups,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.8.18.3.2.1,HPN-ICF-USERLOG-MIB::hpnicfUserlogMandatoryGroup,,,,,,A collection of objects providing mandatory Userlog information.
.1.3.6.1.4.1.11.2.14.11.15.8.18.3.2.2,HPN-ICF-USERLOG-MIB::hpnicfUserlogConfigGroup,,,,,,All configurable parameters of Userlog feature.
.1.3.6.1.4.1.11.2.14.11.15.8.18.3.2.3,HPN-ICF-USERLOG-MIB::hpnicfUserlogInfoGroup,,,,,,All running information of Userlog feature.
.1.3.6.1.4.1.11.2.14.11.15.8.22,HPN-ICF-OID-MIB::hpnicfNTP,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.8.22.1,HPN-ICF-NTP-MIB::hpnicfNTPSystemMIB,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.8.22.1.1,HPN-ICF-NTP-MIB::hpnicfNTPSystemMIBObjects,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.8.22.1.1.1,HPN-ICF-NTP-MIB::hpnicfNTPSysLeap,INTEGER,read-only,,current,noWarning(0):addSecond(1):subtractSecond(2):alarm(3),Leap Indicator (LI): This is a two-bit code warning of an impending leap second to be inserted/deleted in the last minute of the current day, with bit 0 and bit 1, respectively, coded as follows: 00, no warning 01, last minute has 61 seconds 10, last minute has 59 seconds) 11, alarm condition (clock not synchronized).
.1.3.6.1.4.1.11.2.14.11.15.8.22.1.1.2,HPN-ICF-NTP-MIB::hpnicfNTPSysStratum,Integer32,read-only,,current,,This is an eight-bit integer indicating the stratum level of the local clock, with values defined as follows: 0, unspecified 1, primary reference (e.g.,, radio clock) 2-255, secondary reference (via NTP)
.1.3.6.1.4.1.11.2.14.11.15.8.22.1.1.3,HPN-ICF-NTP-MIB::hpnicfNTPSysPrecision,Integer32,read-only,,current,,Precision : This is a signed integer indicating the precision of the various clocks, in seconds to the nearest power of two. The value must be rounded to the next larger power of two; for instance, a 50-Hz (20 ms) or 60-Hz (16.67ms) power-frequency clock would be assigned the value -5 (31.25 ms), while a 1000-Hz (1 ms) crystal-controlled clock would be assigned the value -9 (1.95 ms).
.1.3.6.1.4.1.11.2.14.11.15.8.22.1.1.4,HPN-ICF-NTP-MIB::hpnicfNTPSysRootdelay,OCTET,read-only,,current,,Root Delay : This is a signed fixed-point number indicating the total roundtrip delay to the primary reference source at the root of the synchronization subnet, in milliseconds. Note that this variable can take on both positive and negative values, depending on clock precision and skew.
.1.3.6.1.4.1.11.2.14.11.15.8.22.1.1.5,HPN-ICF-NTP-MIB::hpnicfNTPSysRootdispersion,OCTET,read-only,,current,,Root Dispersion : This is a signed fixed-point number indicating the maximum error relative to the primary reference source at the root of the synchronization subnet, in milliseconds. Only positive values greater than zero are possible.
.1.3.6.1.4.1.11.2.14.11.15.8.22.1.1.6,HPN-ICF-NTP-MIB::hpnicfNTPSysRefid,OCTET,read-only,,current,,Reference Clock Identifier : This is a 32-bit code identifying the particular reference clock. In the case of stratum 0 (unspecified) or stratum 1 (primary reference source), this is a four-octet, left-justified, zero-padded ASCII string. Stratum, Code, Meaning 0, DCN, DCN routing protocol 0, TSP, TSP time protocol 1, ATOM, Atomic clock (calibrated) 1, WWVB, WWVB LF (band 5) radio 1, GOES, GOES UHF (band 9) satellite 1, WWV, WWV HF (band 7) radio
.1.3.6.1.4.1.11.2.14.11.15.8.22.1.1.7,HPN-ICF-NTP-MIB::hpnicfNTPSysReftime,OCTET,read-only,,current,,Reference Timestamp : This is the local time, in timestamp format, when the local clock was last updated. If the local clock has never been synchronized, the value is zero.
.1.3.6.1.4.1.11.2.14.11.15.8.22.1.1.8,HPN-ICF-NTP-MIB::hpnicfNTPSysPoll,Integer32,read-only,,current,,Poll Interval : This is a signed integer indicating the minimum interval between transmitted messages, in seconds as a power of two. For instance, a value of six indicates a minimum interval of 64 seconds.
.1.3.6.1.4.1.11.2.14.11.15.8.22.1.1.9,HPN-ICF-NTP-MIB::hpnicfNTPSysPeer,Integer32,read-only,,obsolete,,This is a selector identifying the current synchronization source. Usually this will be a pointer to a structure containing the peer variables. The special value NULL indicates There is no currently valid synchronization source. hpnicfNTPSysPeer is replaced by hpnicfNTPSysSrcPeer. Reading hpnicfNTPSysPeer might fail because the syntax value range is limited, for example, when the synchronization source IP address is a Class C address.
.1.3.6.1.4.1.11.2.14.11.15.8.22.1.1.10,HPN-ICF-NTP-MIB::hpnicfNTPSysState,INTEGER,read-only,,current,noUpdateClock(0):getfreqInfo(1):clockBySet(2):clockBySetAndNoFreq(3):clockBySyns(4):findError(5),This is a integer indicating the state of local clock.
.1.3.6.1.4.1.11.2.14.11.15.8.22.1.1.11,HPN-ICF-NTP-MIB::hpnicfNTPSysOffset,OCTET,read-only,,current,,The offset of two clocks is the time difference between them, in milliseconds.
.1.3.6.1.4.1.11.2.14.11.15.8.22.1.1.12,HPN-ICF-NTP-MIB::hpnicfNTPSysDrift,OCTET,read-only,,current,,Real clocks exhibit some variation in skew (second derivative of offset with time), which is called drift.
.1.3.6.1.4.1.11.2.14.11.15.8.22.1.1.13,HPN-ICF-NTP-MIB::hpnicfNTPSysCompliance,OCTET,read-only,,current,,This is a string indicating the system error.
.1.3.6.1.4.1.11.2.14.11.15.8.22.1.1.14,HPN-ICF-NTP-MIB::hpnicfNTPSysClock,OCTET,read-only,,current,,This is the current local time, in timestamp format. Local time is derived from the hardware clock of the particular machine and increments at intervals depending on the design used.
.1.3.6.1.4.1.11.2.14.11.15.8.22.1.1.15,HPN-ICF-NTP-MIB::hpnicfNTPSysStabil,OCTET,read-only,,current,,This is a indicating that stability of a clock is how well it can maintain a constant frequency.
.1.3.6.1.4.1.11.2.14.11.15.8.22.1.1.16,HPN-ICF-NTP-MIB::hpnicfNTPSysAuthenticate,INTEGER,read-write,,current,noAuthenticate(0):authenticate(1),This is a integer indicating that system support authentication.
.1.3.6.1.4.1.11.2.14.11.15.8.22.1.1.17,HPN-ICF-NTP-MIB::hpnicfNTPSysPollSec,Integer32,read-write,,current,,PollSec Interval : This is a integer indicating the minimum interval between transmitted messages. For instance, a value of six indicates a minimum interval of 6 seconds.
.1.3.6.1.4.1.11.2.14.11.15.8.22.1.1.18,HPN-ICF-NTP-MIB::hpnicfNTPSysClockSec,Integer32,read-only,,current,,This is the current local time, in integer format. Local time is derived from the hardware clock of the particular machine and increments at intervals depending on the design used.
.1.3.6.1.4.1.11.2.14.11.15.8.22.1.1.19,HPN-ICF-NTP-MIB::hpnicfNTPServerIP,IpAddress,read-write,,current,,The NTP server ip address. It must be a unicast address, rather than a broadcast address, a multicast address or the IP address of the local clock. To delete a configured NTP server ip address, please set hpnicfNTPServerIP to 0.
.1.3.6.1.4.1.11.2.14.11.15.8.22.1.1.20,HPN-ICF-NTP-MIB::hpnicfNTPSysSrcPeer,Unsigned32,read-only,,current,,This is a selector identifying the current synchronization source. Usually this will be a unsigned integer containing the peer variables. The special value 0 indicates There is no currently valid synchronization source. This node will replace hpnicfNTPSysPeer, because its value range is unlimited, and data type is changed from Integer32 to Unsigned32.
.1.3.6.1.4.1.11.2.14.11.15.8.22.2,HPN-ICF-NTP-MIB::hpnicfNTPPeerMIB,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.8.22.2.1,HPN-ICF-NTP-MIB::hpnicfNTPPeerMIBObjects,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.8.22.2.1.1,HPN-ICF-NTP-MIB::hpnicfNTPPeerTable,,not-accessible,,current,,This table provides information on the peers with which the local NTP server has associations. The peers are also NTP servers but running on different hosts.
.1.3.6.1.4.1.11.2.14.11.15.8.22.2.1.1.1,HPN-ICF-NTP-MIB::hpnicfNTPPeerEntry,,not-accessible,hpnicfNTPPeerRemAdr:hpnicfNTPPeerHMode,current,,Each peers' entry provides NTP information retrieved from a particular peer NTP server. Each peer is identified by a unique association identifier. Entries are automatically created when the user configures the NTP server to be associated with remote peers. Similarly entries are deleted when the user removes the peer association from the NTP server. Entries can also be created by the management station by setting values for the following objects: hpnicfNTPPeerRemAdr and making the hpnicfNTPPeerRowStatus as 'active'. At the least, the management station has to set a value for hpnicfNTPPeerRemAdr to make the row active.
.1.3.6.1.4.1.11.2.14.11.15.8.22.2.1.1.1.1,HPN-ICF-NTP-MIB::hpnicfNTPPeerConfig,INTEGER,read-only,,current,true(1):false(2),This is a bit indicating that the association was created from configuration information and should not be demobilized if the peer becomes unreachable.
.1.3.6.1.4.1.11.2.14.11.15.8.22.2.1.1.1.2,HPN-ICF-NTP-MIB::hpnicfNTPPeerAuthenable,INTEGER,read-only,,current,true(1):false(2),This is a bit indicating that system support authentication.
.1.3.6.1.4.1.11.2.14.11.15.8.22.2.1.1.1.3,HPN-ICF-NTP-MIB::hpnicfNTPPeerAuthentic,INTEGER,read-only,,current,true(1):false(2),This is a bit indicating that massage pass authentication which is authentic.
.1.3.6.1.4.1.11.2.14.11.15.8.22.2.1.1.1.4,HPN-ICF-NTP-MIB::hpnicfNTPPeerRemAdr,IpAddress,not-accessible,,current,,The IP address of the peer. When creating a new association, a value for this object should be set before the row is made active.
.1.3.6.1.4.1.11.2.14.11.15.8.22.2.1.1.1.5,HPN-ICF-NTP-MIB::hpnicfNTPPeerRemPort,Integer32,read-only,,current,,The UDP port number on which the peer receives NTP messages.
.1.3.6.1.4.1.11.2.14.11.15.8.22.2.1.1.1.6,HPN-ICF-NTP-MIB::hpnicfNTPPeerLocAdr,IpAddress,read-only,,current,,The IP address of the local host. Multi-homing can be supported using this object.
.1.3.6.1.4.1.11.2.14.11.15.8.22.2.1.1.1.7,HPN-ICF-NTP-MIB::hpnicfNTPPeerLocPort,Integer32,read-only,,current,,The UDP port number on which the local host receives NTP messages.
.1.3.6.1.4.1.11.2.14.11.15.8.22.2.1.1.1.8,HPN-ICF-NTP-MIB::hpnicfNTPPeerLeap,INTEGER,read-only,,current,noWarning(0):addSecond(1):subtractSecond(2):alarm(3),This is a two-bit code warning of an impending leap second to be inserted in the NTP timescale. The bits are set before 23:59 on the day of insertion and reset after 00:00 on the following day. This causes the number of seconds (rollover interval) in the day of insertion to be increased or decreased by one. The two bits are coded as below, 00, no warning 01, last minute has 61 seconds 10, last minute has 59 seconds 11, alarm condition (clock not synchronized)
.1.3.6.1.4.1.11.2.14.11.15.8.22.2.1.1.1.9,HPN-ICF-NTP-MIB::hpnicfNTPPeerHMode,INTEGER,not-accessible,,current,unspecified(0):symmetricActive(1):symmetricPassive(2):client(3):server(4):broadcast(5):reservedControl(6):reservedPrivate(7):broadcastclient(8):multicastclient(9),This is an integer indicating the association mode, with values coded as follows, 0, unspecified 1, symmetric active - A host operating in this mode sends periodic messages regardless of the reach ability state or stratum of its peer. By operating in this mode the host announces its willingness to synchronize and be synchronized by the peer 2, symmetric passive - This type of association is ordinarily created upon arrival of a message from a peer operating in the symmetric active mode and persists only as long as the peer is reachable and operating at a stratum level less than or equal to the host; otherwise, the association is dissolved. However, the association will always persist until at least one message has been sent in reply. By operating in this mode the host announces its willingness to synchronize and be synchronized by the peer 3, client - A host operating in this mode sends periodic messages regardless of the reach ability state or stratum of its peer. By operating in this mode the host, usually a LAN workstation, announces its willingness to be synchronized by, but not to synchronize the peer 4, server - This type of association is ordinarily created upon arrival of a client request message and exists only in order to reply to that request, after which the association is dissolved. By operating in this mode the host, usually a LAN time server, announces its willingness to synchronize, but not to be synchronized by the peer 5, broadcast - A host operating in this mode sends periodic messages regardless of the reach ability state or stratum of the peers. By operating in this mode the host, usually a LAN time server operating on a high-speed broadcast medium, announces its willingness to synchronize all of the peers, but not to be synchronized by any of them 6, reserved for NTP control messages 7, reserved for private use 8, broadcastclient 9, multicastclient
.1.3.6.1.4.1.11.2.14.11.15.8.22.2.1.1.1.10,HPN-ICF-NTP-MIB::hpnicfNTPPeerStratum,Integer32,read-only,,current,,This is a integer indicating the stratum level of the peer clock, with values defined as follows: 0, unspecified 1, primary reference (e.g.,, radio clock) 2-255, secondary reference (via NTP)
.1.3.6.1.4.1.11.2.14.11.15.8.22.2.1.1.1.11,HPN-ICF-NTP-MIB::hpnicfNTPPeerPPoll,Integer32,read-only,,current,,The interval at which the peer polls the local host.
.1.3.6.1.4.1.11.2.14.11.15.8.22.2.1.1.1.12,HPN-ICF-NTP-MIB::hpnicfNTPPeerHPoll,Integer32,read-only,,current,,The interval at which the local host polls the peer.
.1.3.6.1.4.1.11.2.14.11.15.8.22.2.1.1.1.13,HPN-ICF-NTP-MIB::hpnicfNTPPeerPrecision,Integer32,read-only,,current,,This is a signed integer indicating the precision of the peer clock, in seconds to the nearest power of two. The value must be rounded to the next larger power of two; for instance, a 50-Hz (20 ms) or 60-Hz (16.67 ms) power-frequency clock would be assigned the value -5 (31.25 ms), while a 1000-Hz (1 ms) crystal-controlled clock would be assigned the value -9 (1.95 ms).
.1.3.6.1.4.1.11.2.14.11.15.8.22.2.1.1.1.14,HPN-ICF-NTP-MIB::hpnicfNTPPeerRootDelay,OCTET,read-only,,current,,This is a signed fixed-point number indicating the total roundtrip delay to the primary reference source at the root of the synchronization subnet, in milliseconds. Note that this variable can take on both positive and negative values, depending on clock precision and skew.
.1.3.6.1.4.1.11.2.14.11.15.8.22.2.1.1.1.15,HPN-ICF-NTP-MIB::hpnicfNTPPeerRootDispersion,OCTET,read-only,,current,,This is a signed fixed-point number indicating the maximum error of the peer clock relative to the primary reference source at the root of the synchronization subnet, in milliseconds. Only positive values greater than zero are possible.
.1.3.6.1.4.1.11.2.14.11.15.8.22.2.1.1.1.16,HPN-ICF-NTP-MIB::hpnicfNTPPeerRefId,OCTET,read-only,,current,,The reference identifier of the peer. This is a 32-bit code identifying the particular reference clock. In the case of stratum 0 (unspecified) or stratum 1 (primary reference source), this is a four-octet, left-justified, zero-padded ASCII string. Stratum, Code, Meaning 0, DCN, DCN routing protocol 0, TSP, TSP time protocol 1, ATOM, Atomic clock (calibrated) 1, WWVB, WWVB LF (band 5) radio 1, GOES, GOES UHF (band 9) satellite 1, WWV, WWV HF (band 7) radio
.1.3.6.1.4.1.11.2.14.11.15.8.22.2.1.1.1.17,HPN-ICF-NTP-MIB::hpnicfNTPPeerRefTime,OCTET,read-only,,current,,This is the local time at the peer, in timestamp format, when the local clock was last updated. If the local clock has never been synchronized, the value is zero.
.1.3.6.1.4.1.11.2.14.11.15.8.22.2.1.1.1.18,HPN-ICF-NTP-MIB::hpnicfNTPPeerOrg,OCTET,read-only,,current,,This is the local time, in timestamp format, at the peer when it's latest NTP message was sent. If the peer becomes unreachable the value is set to zero
.1.3.6.1.4.1.11.2.14.11.15.8.22.2.1.1.1.19,HPN-ICF-NTP-MIB::hpnicfNTPPeerRec,OCTET,read-only,,current,,This is the local time, in timestamp format, when the latest NTP message from the peer arrived. If the peer becomes unreachable the value is set to zero.
.1.3.6.1.4.1.11.2.14.11.15.8.22.2.1.1.1.20,HPN-ICF-NTP-MIB::hpnicfNTPPeerXmt,OCTET,read-only,,current,,This is the local time, in timestamp format, at which the NTP message departed the sender.
.1.3.6.1.4.1.11.2.14.11.15.8.22.2.1.1.1.21,HPN-ICF-NTP-MIB::hpnicfNTPPeerReach,Integer32,read-only,,current,,This is a shift register of NTP.WINDOW bits used to determine the reach ability status of the peer, with bits entering from the least significant (rightmost) end. A peer is considered reachable if at least one bit in this register is set to one
.1.3.6.1.4.1.11.2.14.11.15.8.22.2.1.1.1.22,HPN-ICF-NTP-MIB::hpnicfNTPPeerValid,Integer32,read-only,,current,,This is an integer counter indicating the valid samples remaining in the filter register. It is used to determine the reach ability state and when the poll interval should be increased or decreased.
.1.3.6.1.4.1.11.2.14.11.15.8.22.2.1.1.1.23,HPN-ICF-NTP-MIB::hpnicfNTPPeerTimer,Integer32,read-only,,current,,This is an integer counter used to control the interval of transmitted NTP messages from the local host to the peer.
.1.3.6.1.4.1.11.2.14.11.15.8.22.2.1.1.1.24,HPN-ICF-NTP-MIB::hpnicfNTPPeerDelay,OCTET,read-only,,current,,This is a signed fixed-point number indicating the roundtrip delay of the peer clock relative to the local clock over the network path between them, in milliseconds. Note that this variable can take on both positive and negative values, depending on clock precision and skew-error accumulation.
.1.3.6.1.4.1.11.2.14.11.15.8.22.2.1.1.1.25,HPN-ICF-NTP-MIB::hpnicfNTPPeerOffset,OCTET,read-only,,current,,This is a signed, fixed-point number indicating the offset of the peer clock relative to the local clock, in milliseconds.
.1.3.6.1.4.1.11.2.14.11.15.8.22.2.1.1.1.26,HPN-ICF-NTP-MIB::hpnicfNTPPeerJitter,OCTET,read-only,,current,,This is an indicating that peer of sample Variance
.1.3.6.1.4.1.11.2.14.11.15.8.22.2.1.1.1.27,HPN-ICF-NTP-MIB::hpnicfNTPPeerDispersion,OCTET,read-only,,current,,This is a signed fixed-point number indicating the maximum error of the peer clock relative to the local clock over the network path between them, in milliseconds. Only positive values greater than zero are possible.
.1.3.6.1.4.1.11.2.14.11.15.8.22.2.1.1.1.28,HPN-ICF-NTP-MIB::hpnicfNTPPeerKeyId,Unsigned32,read-only,,current,,This is an unsigned integer identifying the cryptographic key used to generate the message-authentication code.
.1.3.6.1.4.1.11.2.14.11.15.8.22.2.1.1.1.29,HPN-ICF-NTP-MIB::hpnicfNTPPeerFiltDelay,OCTET,read-only,,current,,Round-trip delay of the peer clock relative to the local clock over the network path between them, in milliseconds. This variable can take on both positive and negative values, depending on clock precision and skew-error accumulation.
.1.3.6.1.4.1.11.2.14.11.15.8.22.2.1.1.1.30,HPN-ICF-NTP-MIB::hpnicfNTPPeerFiltOffset,OCTET,read-only,,current,,The offset of the peer clock relative to the local clock in milliseconds.
.1.3.6.1.4.1.11.2.14.11.15.8.22.2.1.1.1.31,HPN-ICF-NTP-MIB::hpnicfNTPPeerFiltError,OCTET,read-only,,current,,The maximum error of the peer clock relative to the local clock over the network path between them, in milliseconds. Only positive values greater than zero are possible.
.1.3.6.1.4.1.11.2.14.11.15.8.22.2.1.1.1.32,HPN-ICF-NTP-MIB::hpnicfNTPPeerPMode,INTEGER,read-only,,current,unspecified(0):symmetricActive(1):symmetricPassive(2):client(3):server(4):broadcast(5):reservedControl(6):reservedPrivate(7):broadcastclient(8):multicastclient(9),This is an integer indicating the association mode, with values coded as follows, 0, unspecified 1, symmetric active - A host operating in this mode sends periodic messages regardless of the reach ability state or stratum of its peer. By operating in this mode the host announces its willingness to synchronize and be synchronized by the peer 2, symmetric passive - This type of association is ordinarily created upon arrival of a message from a peer operating in the symmetric active mode and persists only as long as the peer is reachable and operating at a stratum level less than or equal to the host; otherwise, the association is dissolved. However, the association will always persist until at least one message has been sent in reply. By operating in this mode the host announces its willingness to synchronize and be synchronized by the peer 3, client - A host operating in this mode sends periodic messages regardless of the reach ability state or stratum of its peer. By operating in this mode the host, usually a LAN workstation, announces its willingness to be synchronized by, but not to synchronize the peer 4, server - This type of association is ordinarily created upon arrival of a client request message and exists only in order to reply to that request, after which the association is dissolved. By operating in this mode the host, usually a LAN time server, announces its willingness to synchronize, but not to be synchronized by the peer 5, broadcast - A host operating in this mode sends periodic messages regardless of the reach ability state or stratum of the peers. By operating in this mode the host, usually a LAN time server operating on a high-speed broadcast medium, announces its willingness to synchronize all of the peers, but not to be synchronized by any of them 6, reserved for NTP control messages 7, reserved for private use 8, broadcastclient 9, multicastclient When creating a new peer association, if no value is specified for this object, it defaults to 'symmetricActive'.
.1.3.6.1.4.1.11.2.14.11.15.8.22.2.1.1.1.33,HPN-ICF-NTP-MIB::hpnicfNTPPeerReceived,Counter32,read-only,,current,,The number of received massages.
.1.3.6.1.4.1.11.2.14.11.15.8.22.2.1.1.1.34,HPN-ICF-NTP-MIB::hpnicfNTPPeerSent,Counter32,read-only,,current,,The number of send massages.
.1.3.6.1.4.1.11.2.14.11.15.8.22.2.1.1.1.35,HPN-ICF-NTP-MIB::hpnicfNTPPeerFlash,BITS,read-only,,current,recvRepeatMsg(0):recvremanMsg(1):unSynMsg(2):dispBeyond(3):unauthenticate(4):unSynClock(5):straBeyond(6):rootDispBeyond(7):noAuthen(8):refuOperate(9),The information about the massage.
.1.3.6.1.4.1.11.2.14.11.15.8.22.2.1.1.1.36,HPN-ICF-NTP-MIB::hpnicfNTPPeerRowStatus,INTEGER,read-create,,current,active(1):notInService(2):notReady(3):createAndGo(4):createAndWait(5):destroy(6),The status object for this row. When a management station is creating a new row, it should set the value for cntpPeersPeerAddress at least, before the row can be made 'active'.
.1.3.6.1.4.1.11.2.14.11.15.8.25,HPN-ICF-OID-MIB::hpnicfLAG,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.8.25.1,HPN-ICF-LAG-MIB::hpnicfLAGMibObjects,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.8.25.1.1,HPN-ICF-LAG-MIB::hpnicfAggLinkTable,,not-accessible,,current,,A table of aggregate link objects.
.1.3.6.1.4.1.11.2.14.11.15.8.25.1.1.1,HPN-ICF-LAG-MIB::hpnicfAggLinkEntry,,not-accessible,hpnicfAggLinkNumber,current,,Entry of table.
.1.3.6.1.4.1.11.2.14.11.15.8.25.1.1.1.1,HPN-ICF-LAG-MIB::hpnicfAggLinkNumber,Integer32,accessible-for-notify,,current,,The serial number of aggregation group.
.1.3.6.1.4.1.11.2.14.11.15.8.25.1.1.1.2,HPN-ICF-LAG-MIB::hpnicfAggLinkName,OCTET,read-create,,current,,Aggregation name.
.1.3.6.1.4.1.11.2.14.11.15.8.25.1.1.1.3,HPN-ICF-LAG-MIB::hpnicfAggLinkMode,INTEGER,read-create,,current,manual(1):static(2):dynamic(3),Type of aggregation. manual: Manual aggregation, no LACP. static: Membership specified by user, LACP is used to validate. dynamic: Completely dynamic aggregation detected by LACP.
.1.3.6.1.4.1.11.2.14.11.15.8.25.1.1.1.4,HPN-ICF-LAG-MIB::hpnicfAggLinkPortList,OCTET,read-create,,current,,List of ports in this link aggregation group, by bridge port number. If the mode of the link aggregation group is manual or static, you can update this list to your hearts content. However, if the link aggregation group is dynamic, the system will maintain it. You are not permitted to set the value of this to all zeroes.
.1.3.6.1.4.1.11.2.14.11.15.8.25.1.1.1.5,HPN-ICF-LAG-MIB::hpnicfAggLinkState,INTEGER,read-create,,current,active(1):notInService(2):notReady(3):createAndGo(4):createAndWait(5):destroy(6),RowStatus, now support three states: createAndGo, active, destroy.
.1.3.6.1.4.1.11.2.14.11.15.8.25.1.1.1.6,HPN-ICF-LAG-MIB::hpnicfAggPortListSelectedPorts,OCTET,read-only,,current,,A PortList of physical ports that have been selected but not attached to this aggregator. When the bit is set to 1,it means the corresponding port is in the portlist.
.1.3.6.1.4.1.11.2.14.11.15.8.25.1.1.1.7,HPN-ICF-LAG-MIB::hpnicfAggPortListSamePartnerPorts,OCTET,read-only,,current,,PortList of physical ports that have the same Actor SystemID and partner systemID as this aggregator, but have different actor and partner keys of aggregator.
.1.3.6.1.4.1.11.2.14.11.15.8.25.1.2,HPN-ICF-LAG-MIB::hpnicfAggPortTable,,not-accessible,,current,,A table of aggregate port objects.
.1.3.6.1.4.1.11.2.14.11.15.8.25.1.2.1,HPN-ICF-LAG-MIB::hpnicfAggPortEntry,,not-accessible,hpnicfAggPortIndex,current,,Entry of table.
.1.3.6.1.4.1.11.2.14.11.15.8.25.1.2.1.1,HPN-ICF-LAG-MIB::hpnicfAggPortIndex,Gauge32,accessible-for-notify,,current,,Port ifindex which is according to RFC1213 MIB.
.1.3.6.1.4.1.11.2.14.11.15.8.25.1.2.1.2,HPN-ICF-LAG-MIB::hpnicfAggPortNotAttachedReason,Integer32,read-write,,current,,Reason why this port is selected for an aggregator but not attached, 0: The port is attached to this aggregator. 1: The current number of active ports has reached the upper limit. 2: All aggregation resources are already in-use. 3: The port's configuration is improper for being attached. 4: The port's partner is improper for being attached. 5: The number of current active ports has not reached the lower limit. 6: The port's physical state (down) is improper for being attached. 7: The port is not selected for an aggregator. 8: The port's hardware restriction is improper for being attached. 9: The port's speed is improper for being attached. 10: The port's duplex mode is improper for being attached.
.1.3.6.1.4.1.11.2.14.11.15.8.25.1.2.1.3,HPN-ICF-LAG-MIB::hpnicfAggPortLacpState,INTEGER,read-write,,current,true(1):false(2),Control ports' lacp enble or disable.
.1.3.6.1.4.1.11.2.14.11.15.8.25.1.2.1.4,HPN-ICF-LAG-MIB::hpnicfAggPortNotAttachedString,OCTET,read-write,,current,,The string which interprets this port is selected for an aggregator but not attached.
.1.3.6.1.4.1.11.2.14.11.15.8.25.1.3,HPN-ICF-LAG-MIB::hpnicfAggResourceAllocationValue,OCTET,read-only,,current,,The priority value calculated to decide which aggregations have first call on the load-sharing aggregation resources in the hardware. It depends on the aggregation type and total speed.
.1.3.6.1.4.1.11.2.14.11.15.8.25.2,HPN-ICF-LAG-MIB::hpnicfLAGMibNotifications,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.8.25.2.1,HPN-ICF-LAG-MIB::hpnicfAggSpeedChangedNotification,,,,,,This event will be triggered whenever an aggregation changes its speed.
.1.3.6.1.4.1.11.2.14.11.15.8.25.2.2,HPN-ICF-LAG-MIB::hpnicfAggPortInactiveNotification,,,,,,This event will be triggered whenever any port in aggregator is made inactive.
.1.3.6.1.4.1.11.2.14.11.15.8.25.2.3,HPN-ICF-LAG-MIB::hpnicfAggPortInactiveNotification2,,,,,,This event will be triggered whenever the port in aggregator is made inactive.
.1.3.6.1.4.1.11.2.14.11.15.8.25.2.4,HPN-ICF-LAG-MIB::hpnicfAggPortActiveNotification,,,,,,This event will be triggered whenever the port in aggregator is made active.
.1.3.6.1.4.1.11.2.14.11.15.8.25.3,HPN-ICF-LAG-MIB::hpnicfLAGMibConformance,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.8.25.3.1,HPN-ICF-LAG-MIB::hpnicfLAGMibCompliances,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.8.25.3.1.1,HPN-ICF-LAG-MIB::hpnicfLAGMibCompliance,,,,,,The compliance statement for SNMP entities which implement the Lag MIB.
.1.3.6.1.4.1.11.2.14.11.15.8.25.3.2,HPN-ICF-LAG-MIB::hpnicfLAGMibGroup,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.8.25.3.2.1,HPN-ICF-LAG-MIB::hpnicfLAGMibObjectGroup,,,,,,The collection of objects which are used to represent LAG objects.
.1.3.6.1.4.1.11.2.14.11.15.8.25.3.2.2,HPN-ICF-LAG-MIB::hpnicfLAGMibNotificationGroup,,,,,,The collection of objects which are used to represent notifications.
.1.3.6.1.4.1.11.2.14.11.15.8.26,HPN-ICF-OID-MIB::hpnicfSmonExtend,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.8.26.1,HPN-ICF-LswSMON-MIB::hpnicfsmonExtendObject,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.8.26.1.1,HPN-ICF-LswSMON-MIB::hpnicfdot1qVlanStatNumber,INTEGER,read-only,,mandatory,,The number of vlans that can collect statistics of packets.
.1.3.6.1.4.1.11.2.14.11.15.8.26.1.2,HPN-ICF-LswSMON-MIB::hpnicfdot1qVlanStatStatusTable,,not-accessible,,mandatory,,VLAN statistics status table.
.1.3.6.1.4.1.11.2.14.11.15.8.26.1.2.1,HPN-ICF-LswSMON-MIB::hpnicfdot1qVlanStatStatusEntry,,not-accessible,hpnicfdot1qVlanStatEnableIndex,mandatory,, VLAN statistics status table entry.
.1.3.6.1.4.1.11.2.14.11.15.8.26.1.2.1.1,HPN-ICF-LswSMON-MIB::hpnicfdot1qVlanStatEnableIndex,INTEGER,read-only,,mandatory,,Vlan index .
.1.3.6.1.4.1.11.2.14.11.15.8.26.1.2.1.2,HPN-ICF-LswSMON-MIB::hpnicfdot1qVlanStatEnableStatus,INTEGER,read-write,,mandatory,enabled(1):disabled(2),VLAN Statistics Status.It represent the current VLAN supports statistic or not.
.1.3.6.1.4.1.11.2.14.11.15.8.32,HPN-ICF-OID-MIB::hpnicfQoS,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.8.32.3,HPN-ICF-FR-QOS-MIB::hpnicfFrQoSMib,,,,,,This MIB contains objects to  Manage configuration and Monitor running state  for Class Based FR QoS feature.  ********************************* MIB Tables ********************************** This MIB consists of the following tables: 1 : hpnicfFrClassCfgInfoTable 2 : hpnicfCirCfgInfoTable 3 : hpnicfIfApplyFrClassTable 4 : hpnicfPvcApplyFrClassTable 5 : hpnicfFrPvcBandwidthTable 5 : hpnicfRTPFrClassApplyTable 6 : hpnicfRTPFrPvcQueueRunInfoTable  
.1.3.6.1.4.1.11.2.14.11.15.8.32.3.1,HPN-ICF-FR-QOS-MIB::hpnicfFrQoSObjects,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.8.32.3.1.1,HPN-ICF-FR-QOS-MIB::hpnicfFrClassObjects,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.8.32.3.1.1.1,HPN-ICF-FR-QOS-MIB::hpnicfFrClassIndexNext,Integer32,read-only,,current,,This object contains an appropriate value to be used for 
.1.3.6.1.4.1.11.2.14.11.15.8.32.3.1.1.2,HPN-ICF-FR-QOS-MIB::hpnicfFrClassCfgInfoTable,,not-accessible,,current,,A table of Fr Class configuration information.
.1.3.6.1.4.1.11.2.14.11.15.8.32.3.1.1.2.1,HPN-ICF-FR-QOS-MIB::hpnicfFrClassCfgInfoEntry,,not-accessible,hpnicfFrClassIndex,current,,Fr Class Configuration Information Entry.
.1.3.6.1.4.1.11.2.14.11.15.8.32.3.1.1.2.1.1,HPN-ICF-FR-QOS-MIB::hpnicfFrClassIndex,Integer32,not-accessible,,current,,Index of Fr Class. Begin with 0.
.1.3.6.1.4.1.11.2.14.11.15.8.32.3.1.1.2.1.2,HPN-ICF-FR-QOS-MIB::hpnicfFrClassName,OCTET,read-create,,current,,Name of Fr Class.
.1.3.6.1.4.1.11.2.14.11.15.8.32.3.1.1.2.1.3,HPN-ICF-FR-QOS-MIB::hpnicfFrClassRowStatus,INTEGER,read-create,,current,active(1):notInService(2):notReady(3):createAndGo(4):createAndWait(5):destroy(6),RowStatus. Three actions are used: active,
.1.3.6.1.4.1.11.2.14.11.15.8.32.3.1.1.3,HPN-ICF-FR-QOS-MIB::hpnicfCirAllowCfgInfoTable,,not-accessible,,current,,A table of DCE allowed rate Configuration information.
.1.3.6.1.4.1.11.2.14.11.15.8.32.3.1.1.3.1,HPN-ICF-FR-QOS-MIB::hpnicfCirAllowCfgInfoEntry,,not-accessible,hpnicfCirAllowFrClassIndex:hpnicfCirAllowDirection,current,,DCE allowed ratee Configuration Information Entry.
.1.3.6.1.4.1.11.2.14.11.15.8.32.3.1.1.3.1.1,HPN-ICF-FR-QOS-MIB::hpnicfCirAllowFrClassIndex,Integer32,not-accessible,,current,,Index of Fr Class. Begin with 0.Equal to hpnicfFrClassIndex
.1.3.6.1.4.1.11.2.14.11.15.8.32.3.1.1.3.1.2,HPN-ICF-FR-QOS-MIB::hpnicfCirAllowDirection,INTEGER,not-accessible,,current,inbound(1):outbound(2):inboundAndOutbound(3),Packet Direction. 
.1.3.6.1.4.1.11.2.14.11.15.8.32.3.1.1.3.1.3,HPN-ICF-FR-QOS-MIB::hpnicfCirAllowValue,Integer32,read-create,,current,,DCE allowed rate (value greater than CIR) 
.1.3.6.1.4.1.11.2.14.11.15.8.32.3.1.1.3.1.4,HPN-ICF-FR-QOS-MIB::hpnicfCirAllowRowStatus,INTEGER,read-create,,current,active(1):notInService(2):notReady(3):createAndGo(4):createAndWait(5):destroy(6),RowStatus. Three actions are used: active,
.1.3.6.1.4.1.11.2.14.11.15.8.32.3.1.1.4,HPN-ICF-FR-QOS-MIB::hpnicfCirCfgInfoTable,,not-accessible,,current,,A table of Committed Information Rate Configuration information.
.1.3.6.1.4.1.11.2.14.11.15.8.32.3.1.1.4.1,HPN-ICF-FR-QOS-MIB::hpnicfCirCfgInfoEntry,,not-accessible,hpnicfCirFrClassIndex,current,,Committed Information Rate Configuration Information Entry.
.1.3.6.1.4.1.11.2.14.11.15.8.32.3.1.1.4.1.1,HPN-ICF-FR-QOS-MIB::hpnicfCirFrClassIndex,Integer32,not-accessible,,current,,Index of Fr Class. Begin with 0.Equal to hpnicfFrClassIndex
.1.3.6.1.4.1.11.2.14.11.15.8.32.3.1.1.4.1.2,HPN-ICF-FR-QOS-MIB::hpnicfCirValue,Integer32,read-create,,current,, CIR in packet output direction ,bps. 
.1.3.6.1.4.1.11.2.14.11.15.8.32.3.1.1.4.1.3,HPN-ICF-FR-QOS-MIB::hpnicfCirRowStatus,INTEGER,read-create,,current,active(1):notInService(2):notReady(3):createAndGo(4):createAndWait(5):destroy(6),RowStatus. Three actions are used: active,
.1.3.6.1.4.1.11.2.14.11.15.8.32.3.1.1.5,HPN-ICF-FR-QOS-MIB::hpnicfIfApplyFrClassTable,,not-accessible,,current,,A table of QoS Fr Class instance.
.1.3.6.1.4.1.11.2.14.11.15.8.32.3.1.1.5.1,HPN-ICF-FR-QOS-MIB::hpnicfIfApplyFrClassEntry,,not-accessible,hpnicfIfApplyFrClassIfIndex,current,,FrClass applied on interface Configuration Information Entry.
.1.3.6.1.4.1.11.2.14.11.15.8.32.3.1.1.5.1.1,HPN-ICF-FR-QOS-MIB::hpnicfIfApplyFrClassIfIndex,Integer32,not-accessible,,current,,Interface Index, equal to ifIndex.
.1.3.6.1.4.1.11.2.14.11.15.8.32.3.1.1.5.1.2,HPN-ICF-FR-QOS-MIB::hpnicfIfApplyFrClassIndex,Integer32,read-create,,current,,Index of Fr Class, equal to hpnicfFrClassIndex
.1.3.6.1.4.1.11.2.14.11.15.8.32.3.1.1.5.1.3,HPN-ICF-FR-QOS-MIB::hpnicfIfApplyFrClassRowStatus,INTEGER,read-create,,current,active(1):notInService(2):notReady(3):createAndGo(4):createAndWait(5):destroy(6),RowStatus. Three actions are used: active,
.1.3.6.1.4.1.11.2.14.11.15.8.32.3.1.1.6,HPN-ICF-FR-QOS-MIB::hpnicfPvcApplyFrClassTable,,not-accessible,,current,,A table of QoS Fr Class instance.
.1.3.6.1.4.1.11.2.14.11.15.8.32.3.1.1.6.1,HPN-ICF-FR-QOS-MIB::hpnicfPvcApplyFrClassEntry,,not-accessible,hpnicfPvcApplyFrClassIfIndex:hpnicfPvcApplyFrClassDlciNum,current,,Fr Class applied on FR Pvc Configuration Information Entry.
.1.3.6.1.4.1.11.2.14.11.15.8.32.3.1.1.6.1.1,HPN-ICF-FR-QOS-MIB::hpnicfPvcApplyFrClassIfIndex,Integer32,not-accessible,,current,,Fr Interface Index, equal to ifIndex.
.1.3.6.1.4.1.11.2.14.11.15.8.32.3.1.1.6.1.2,HPN-ICF-FR-QOS-MIB::hpnicfPvcApplyFrClassDlciNum,Integer32,not-accessible,,current,,Fr DLCI number.
.1.3.6.1.4.1.11.2.14.11.15.8.32.3.1.1.6.1.3,HPN-ICF-FR-QOS-MIB::hpnicfPvcApplyFrClassIndex,Integer32,read-create,,current,,Index of Fr Class, equal to hpnicfFrClassIndex
.1.3.6.1.4.1.11.2.14.11.15.8.32.3.1.1.6.1.4,HPN-ICF-FR-QOS-MIB::hpnicfPvcApplyFrClassRowStatus,INTEGER,read-create,,current,active(1):notInService(2):notReady(3):createAndGo(4):createAndWait(5):destroy(6),RowStatus. Three actions are used: active,
.1.3.6.1.4.1.11.2.14.11.15.8.32.3.1.1.7,HPN-ICF-FR-QOS-MIB::hpnicfFrPvcBandwidthTable,,not-accessible,,current,,A table of Running statistics for bandwidth.
.1.3.6.1.4.1.11.2.14.11.15.8.32.3.1.1.7.1,HPN-ICF-FR-QOS-MIB::hpnicfFrPvcBandwidthEntry,,not-accessible,hpnicfPvcApplyFrClassIfIndex:hpnicfPvcApplyFrClassDlciNum,current,,Bandwidth Running statistics
.1.3.6.1.4.1.11.2.14.11.15.8.32.3.1.1.7.1.1,HPN-ICF-FR-QOS-MIB::hpnicfFrPvcBandwidthMaxReservedBW,Integer32,read-only,,current,,Max reserved bandWidth. Unit : Kbps
.1.3.6.1.4.1.11.2.14.11.15.8.32.3.1.1.7.1.2,HPN-ICF-FR-QOS-MIB::hpnicfFrPvcBandwidthAvailable,Integer32,read-only,,current,,Available bandWidth. Unit : Kbps
.1.3.6.1.4.1.11.2.14.11.15.8.32.3.1.2,HPN-ICF-FR-QOS-MIB::hpnicfRTPQoSObjects,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.8.32.3.1.2.1,HPN-ICF-FR-QOS-MIB::hpnicfRTPFrClassApplyTable,,not-accessible,,current,,A table of RTP(Realtime Transport Protocol) Queue instance.
.1.3.6.1.4.1.11.2.14.11.15.8.32.3.1.2.1.1,HPN-ICF-FR-QOS-MIB::hpnicfRTPFrClassApplyEntry,,not-accessible,hpnicfRTPFrClassApplyFrClassIndex,current,,RTP(Realtime Transport Protocol) Queue Configuration Information Entry.
.1.3.6.1.4.1.11.2.14.11.15.8.32.3.1.2.1.1.1,HPN-ICF-FR-QOS-MIB::hpnicfRTPFrClassApplyFrClassIndex,Integer32,not-accessible,,current,,Fr Class Index, equal to HpnicfFrClassIndex.
.1.3.6.1.4.1.11.2.14.11.15.8.32.3.1.2.1.1.2,HPN-ICF-FR-QOS-MIB::hpnicfRTPFrClassApplyStartPort,Integer32,read-create,,current,, 
.1.3.6.1.4.1.11.2.14.11.15.8.32.3.1.2.1.1.3,HPN-ICF-FR-QOS-MIB::hpnicfRTPFrClassApplyEndPort,Integer32,read-create,,current,, 
.1.3.6.1.4.1.11.2.14.11.15.8.32.3.1.2.1.1.4,HPN-ICF-FR-QOS-MIB::hpnicfRTPFrClassApplyBandWidth,Integer32,read-create,,current,,Max bandWidth Value:
.1.3.6.1.4.1.11.2.14.11.15.8.32.3.1.2.1.1.5,HPN-ICF-FR-QOS-MIB::hpnicfRTPFrClassApplyCbs,Integer32,read-create,,current,,
.1.3.6.1.4.1.11.2.14.11.15.8.32.3.1.2.1.1.6,HPN-ICF-FR-QOS-MIB::hpnicfRTPFrClassApplyRowStatus,INTEGER,read-create,,current,active(1):notInService(2):notReady(3):createAndGo(4):createAndWait(5):destroy(6),RowStatus for RTPFrClassApply Table. 
.1.3.6.1.4.1.11.2.14.11.15.8.32.3.1.2.2,HPN-ICF-FR-QOS-MIB::hpnicfRTPFrPvcQueueRunInfoTable,,not-accessible,,current,,A table of Running statistics for RTP(Realtime Transport Protocol) Queue
.1.3.6.1.4.1.11.2.14.11.15.8.32.3.1.2.2.1,HPN-ICF-FR-QOS-MIB::hpnicfRTPFrPvcQueueRunInfoEntry,,not-accessible,hpnicfPvcApplyFrClassIfIndex:hpnicfPvcApplyFrClassDlciNum,current,,RTP(Realtime Transport Protocol) Queue statistics entry.
.1.3.6.1.4.1.11.2.14.11.15.8.32.3.1.2.2.1.1,HPN-ICF-FR-QOS-MIB::hpnicfRTPFrPvcQueueSize,Integer32,read-only,,current,,the packet number of RTP(Realtime Transport Protocol) Queue now.
.1.3.6.1.4.1.11.2.14.11.15.8.32.3.1.2.2.1.2,HPN-ICF-FR-QOS-MIB::hpnicfRTPFrPvcQueueMaxSize,Integer32,read-only,,current,,the Max packet number of RTP(Realtime Transport Protocol) Queue.
.1.3.6.1.4.1.11.2.14.11.15.8.32.3.1.2.2.1.3,HPN-ICF-FR-QOS-MIB::hpnicfRTPFrPvcQueueOutputs,Counter32,read-only,,current,,the Output packet number of RTP(Realtime Transport Protocol) Queue.
.1.3.6.1.4.1.11.2.14.11.15.8.32.3.1.2.2.1.4,HPN-ICF-FR-QOS-MIB::hpnicfRTPFrPvcQueueDiscards,Counter32,read-only,,current,,the Discarded packet number of RTP(Realtime Transport Protocol) Queue.
.1.3.6.1.4.1.11.2.14.11.15.8.33,HPN-ICF-OID-MIB::hpnicfMultilinkPPP,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.8.33.1,HPN-ICF-MP-MIB::hpnicfMpObjects,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.8.33.1.1,HPN-ICF-MP-MIB::hpnicfMpMultilinkTable,,not-accessible,,current,,This table describes the information of MP link.  The index of this table is the interface index of MP group or  VT(Virtual Template).
.1.3.6.1.4.1.11.2.14.11.15.8.33.1.1.1,HPN-ICF-MP-MIB::hpnicfMpMultilinkEntry,,not-accessible,ifIndex,current,,Each entry in this table describes the information of MP link. The available information includes:  the father channel, the slot on which MP bundled,  the number of bundled son channels,  the statistics of lost fragments, reordered packets,  unassigned packets, interleaved packets,  and received/sent sequence.  
.1.3.6.1.4.1.11.2.14.11.15.8.33.1.1.1.1,HPN-ICF-MP-MIB::hpnicfMpMultilinkDescr,OCTET,read-only,,current,,The interface name of the father interface on which MP bundled.  It is the name of a Virtual Temblate or a MP group.
.1.3.6.1.4.1.11.2.14.11.15.8.33.1.1.1.2,HPN-ICF-MP-MIB::hpnicfMpBundleName,OCTET,read-only,,current,,The bundle name of the multilink.  when authentication is configured, the bundle name is the authenticated user name; when authentication not configured, the bundle name is multilink. 
.1.3.6.1.4.1.11.2.14.11.15.8.33.1.1.1.3,HPN-ICF-MP-MIB::hpnicfMpBundledSlot,Integer32,read-only,,current,,The slot on which MP bundled.  
.1.3.6.1.4.1.11.2.14.11.15.8.33.1.1.1.4,HPN-ICF-MP-MIB::hpnicfMpBundledMemberCnt,Integer32,read-only,,current,,The number of the bundled son channel of the MP link. 
.1.3.6.1.4.1.11.2.14.11.15.8.33.1.1.1.5,HPN-ICF-MP-MIB::hpnicfMpLostFragments,Counter32,read-only,,current,,The number of fragments of the MP link discarded because  bad fragments received, or assembling packet failed, etc.
.1.3.6.1.4.1.11.2.14.11.15.8.33.1.1.1.6,HPN-ICF-MP-MIB::hpnicfMpReorderedPkts,Counter32,read-only,,current,,The number of received packets of the MP link reordered. 
.1.3.6.1.4.1.11.2.14.11.15.8.33.1.1.1.7,HPN-ICF-MP-MIB::hpnicfMpUnassignedPkts,Counter32,read-only,,current,,The number of received packets of the MP link waiting for reordering. 
.1.3.6.1.4.1.11.2.14.11.15.8.33.1.1.1.8,HPN-ICF-MP-MIB::hpnicfMpInterleavedPkts,Counter32,read-only,,current,,The number of received packets of the MP link interleaved by the  packets queued in RTPQ(Real-time Transport Protocol Queue) or  LLQ(Low Latency Queue). 
.1.3.6.1.4.1.11.2.14.11.15.8.33.1.1.1.9,HPN-ICF-MP-MIB::hpnicfMpRcvdSequence,Integer32,read-only,,current,,The current sequence number of the MP link for receiving. 
.1.3.6.1.4.1.11.2.14.11.15.8.33.1.1.1.10,HPN-ICF-MP-MIB::hpnicfMpSentSequence,Integer32,read-only,,current,,The current sequence number of the MP link for sending. 
.1.3.6.1.4.1.11.2.14.11.15.8.33.1.2,HPN-ICF-MP-MIB::hpnicfMpMemberlinkTable,,not-accessible,,current,,This table describes the information of son channels of the MP link. The index of this table is the interface index of MP group or VT(Virtual Template).  
.1.3.6.1.4.1.11.2.14.11.15.8.33.1.2.1,HPN-ICF-MP-MIB::hpnicfMpMemberlinkEntry,,not-accessible,ifIndex:hpnicfMpMemberlinkSeqNumber,current,,Each entry in this table describes the information of the bundled son channels of MP link. The available information includes:  the interface index of the son channel,  the interface name of the son channel. 
.1.3.6.1.4.1.11.2.14.11.15.8.33.1.2.1.1,HPN-ICF-MP-MIB::hpnicfMpMemberlinkSeqNumber,Integer32,read-only,,current,,The bundled sequence number of the son channels of the MP link. This object is one of the index of the table. 
.1.3.6.1.4.1.11.2.14.11.15.8.33.1.2.1.2,HPN-ICF-MP-MIB::hpnicfMpMemberlinkIfIndex,Integer32,read-only,,current,,The interface index of the son channels of the MP link. 
.1.3.6.1.4.1.11.2.14.11.15.8.33.1.2.1.3,HPN-ICF-MP-MIB::hpnicfMpMemberlinkDescr,OCTET,read-only,,current,,The interface name of the son channels of the MP link. 
.1.3.6.1.4.1.11.2.14.11.15.8.33.1.2.1.4,HPN-ICF-MP-MIB::hpnicfMpMemberlinkMpStatus,Integer32,read-only,,current,,The MP status of the son channels of the MP link. 
.1.3.6.1.4.1.11.2.14.11.15.8.33.2,HPN-ICF-MP-MIB::hpnicfMpNotifications,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.8.33.3,HPN-ICF-MP-MIB::hpnicfMpConformance,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.8.33.3.1,HPN-ICF-MP-MIB::hpnicfMpCompliances,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.8.33.3.1.1,HPN-ICF-MP-MIB::hpnicfMpCompliance,,,,,,The compliance statement for entities which  implement the Multilink PPP MIB.
.1.3.6.1.4.1.11.2.14.11.15.8.33.3.2,HPN-ICF-MP-MIB::hpnicfMpGroups,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.8.33.3.2.1,HPN-ICF-MP-MIB::hpnicfMpMandatoryGroup,,,,,,A collection of objects providing mandatory MP information.
.1.3.6.1.4.1.11.2.14.11.15.8.33.3.2.2,HPN-ICF-MP-MIB::hpnicfMpInfoGroup,,,,,,All running information of MP feature.
.1.3.6.1.4.1.11.2.14.11.15.8.35,HPN-ICF-OID-MIB::hpnicflswCommon,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.8.35.1,HPN-ICF-OID-MIB::hpnicfLswExtInterface,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.8.35.1.1,HPN-ICF-LswINF-MIB::hpnicfifXXTable,,not-accessible,,current,,Extended interface information table.
.1.3.6.1.4.1.11.2.14.11.15.8.35.1.1.1,HPN-ICF-LswINF-MIB::hpnicfifXXEntry,,not-accessible,ifIndex,current,,Entries of extended interface information table.
.1.3.6.1.4.1.11.2.14.11.15.8.35.1.1.1.1,HPN-ICF-LswINF-MIB::hpnicfifUnBoundPort,INTEGER,read-only,,current,true(1):false(2),Whether it is the unbound port. (true indicates that the port is the main port of the aggregation or the port does not participate in the aggregation.)
.1.3.6.1.4.1.11.2.14.11.15.8.35.1.1.1.2,HPN-ICF-LswINF-MIB::hpnicfifISPhyPort,INTEGER,read-only,,current,true(1):false(2),Whether it is a physical interface.
.1.3.6.1.4.1.11.2.14.11.15.8.35.1.1.1.3,HPN-ICF-LswINF-MIB::hpnicfifAggregatePort,INTEGER,read-only,,current,true(1):false(2),Whether it is the aggregated port. (if the port participates in the aggregation, this value is true.)
.1.3.6.1.4.1.11.2.14.11.15.8.35.1.1.1.4,HPN-ICF-LswINF-MIB::hpnicfifMirrorPort,INTEGER,read-write,,current,true(1):false(2),Whether it is a mirror port.
.1.3.6.1.4.1.11.2.14.11.15.8.35.1.1.1.5,HPN-ICF-LswINF-MIB::hpnicfifVLANType,INTEGER,read-write,,current,vLANTrunk(1):access(2):hybrid(3):fabric(4),port vlan types. hybrid (3) port can carry multiple VLANs. If fabric function is supported, fabric(4) means the port is a fabric port.
.1.3.6.1.4.1.11.2.14.11.15.8.35.1.1.1.6,HPN-ICF-LswINF-MIB::hpnicfifMcastControl,INTEGER,read-write,,current,,Broadcast storm suppression with the step length of 1, ranging from 0 to 100 percent. In some products the step is 5, ranging from 0 to 100.
.1.3.6.1.4.1.11.2.14.11.15.8.35.1.1.1.7,HPN-ICF-LswINF-MIB::hpnicfifFlowControl,INTEGER,read-write,,current,true(1):false(2),Flow control status.
.1.3.6.1.4.1.11.2.14.11.15.8.35.1.1.1.8,HPN-ICF-LswINF-MIB::hpnicfifSrcMacControl,INTEGER,read-only,,current,true(1):false(2),Whether to filter by source MAC address.
.1.3.6.1.4.1.11.2.14.11.15.8.35.1.1.1.9,HPN-ICF-LswINF-MIB::hpnicfifClearStat,INTEGER,read-write,,current,clear(1),Clear specify port statistics. Operation read is not supported.
.1.3.6.1.4.1.11.2.14.11.15.8.35.1.1.1.10,HPN-ICF-LswINF-MIB::hpnicfifXXBasePortIndex,INTEGER,read-only,,current,,Index number of the port and the first port index of the device is 1.
.1.3.6.1.4.1.11.2.14.11.15.8.35.1.1.1.11,HPN-ICF-LswINF-MIB::hpnicfifXXDevPortIndex,INTEGER,read-only,,current,,Device index of the port.
.1.3.6.1.4.1.11.2.14.11.15.8.35.1.1.1.12,HPN-ICF-LswINF-MIB::hpnicfifPpsMcastControl,Integer32,read-write,,current,,The broadcast suppression with pps(packet per second) type. The max value is determined by the port type and product.
.1.3.6.1.4.1.11.2.14.11.15.8.35.1.1.1.13,HPN-ICF-LswINF-MIB::hpnicfifPpsBcastDisValControl,INTEGER,read-write,,current,enable(1):disable(2),Control the port's pps(packet per second) broadcast suppression. When the port is enabled, its pps broadcast suppression value is the global disperse value, and when disabled, it doesn't suppress broadcast.
.1.3.6.1.4.1.11.2.14.11.15.8.35.1.1.1.14,HPN-ICF-LswINF-MIB::hpnicfifUniSuppressionStep,Integer32,read-only,,current,,The step of unicast suppression in ratio mode.
.1.3.6.1.4.1.11.2.14.11.15.8.35.1.1.1.15,HPN-ICF-LswINF-MIB::hpnicfifPpsUniSuppressionMax,Integer32,read-only,,current,,The max pps(packet per second) value of unicast suppression in pps mode.
.1.3.6.1.4.1.11.2.14.11.15.8.35.1.1.1.16,HPN-ICF-LswINF-MIB::hpnicfifMulSuppressionStep,Integer32,read-only,,current,,The step of multicast suppression in ratio mode.
.1.3.6.1.4.1.11.2.14.11.15.8.35.1.1.1.17,HPN-ICF-LswINF-MIB::hpnicfifPpsMulSuppressionMax,Integer32,read-only,,current,,The max pps(packet per second) value of multicast suppression in pps mode.
.1.3.6.1.4.1.11.2.14.11.15.8.35.1.1.1.18,HPN-ICF-LswINF-MIB::hpnicfifUniSuppression,Integer32,read-write,,current,,The unicast suppression with the ranging from 0 to 100 percent in ratio mode. The step is determined by hpnicfifUniSuppressionStep.
.1.3.6.1.4.1.11.2.14.11.15.8.35.1.1.1.19,HPN-ICF-LswINF-MIB::hpnicfifPpsUniSuppression,Integer32,read-write,,current,,The unicast suppression in pps(packet per second) mode. The max value is determined by hpnicfifPpsUniSuppressionMax.
.1.3.6.1.4.1.11.2.14.11.15.8.35.1.1.1.20,HPN-ICF-LswINF-MIB::hpnicfifMulSuppression,Integer32,read-write,,current,,The multicast suppression with ranging from 0 to 100 percent in ratio mode. The step is determined by hpnicfifMulSuppressionStep.
.1.3.6.1.4.1.11.2.14.11.15.8.35.1.1.1.21,HPN-ICF-LswINF-MIB::hpnicfifPpsMulSuppression,Integer32,read-write,,current,,The multicast suppression in pps(packet per second) mode. The max pps value is determined by hpnicfifPpsMulSuppressionMax.
.1.3.6.1.4.1.11.2.14.11.15.8.35.1.1.1.22,HPN-ICF-LswINF-MIB::hpnicfifComboActivePort,INTEGER,read-write,,obsolete,fiber(1):copper(2):na(3),Active port on combo interface.
.1.3.6.1.4.1.11.2.14.11.15.8.35.1.1.1.23,HPN-ICF-LswINF-MIB::hpnicfifBMbpsMulSuppressionMax,Integer32,read-only,,current,,The maximum value of the multicast suppression with bandwidth-based(Mbps) that a port can be configured.
.1.3.6.1.4.1.11.2.14.11.15.8.35.1.1.1.24,HPN-ICF-LswINF-MIB::hpnicfifBMbpsMulSuppression,Integer32,read-write,,current,,With bandwidth-based multicast suppression, the bandwidth is measured in Mbps. The upper limit of the multicast suppession with bandwidth-based(Mbps) is the value of hpnicfifBMbpsMulSuppressionMax in the entry. The default value of hpnicfifBMbpsMulSuppression is the value of hpnicfifBMbpsMulSuppressionMax.
.1.3.6.1.4.1.11.2.14.11.15.8.35.1.1.1.25,HPN-ICF-LswINF-MIB::hpnicfifBKbpsMulSuppressionMax,Integer32,read-only,,current,,The maximum value of the multicast suppression with bandwidth-based(Kbps) that a port can be configured.
.1.3.6.1.4.1.11.2.14.11.15.8.35.1.1.1.26,HPN-ICF-LswINF-MIB::hpnicfifBKbpsMulSuppressionStep,Integer32,read-only,,current,,The step of multicast suppression with bandwidth-based(Kbps).
.1.3.6.1.4.1.11.2.14.11.15.8.35.1.1.1.27,HPN-ICF-LswINF-MIB::hpnicfifBKbpsMulSuppression,Integer32,read-write,,current,,With bandwidth-based multicast suppression, the bandwidth is measured in Kbps. The upper limit of the multicast suppession with bandwidth-based(Kbps) is the value of hpnicfifBKbpsMulSuppressionMax in the entry. The value of hpnicfifBKbpsMulSuppression must be multiple of the value of hpnicfifBKbpsMulSuppressionStep. The default value of hpnicfifBKbpsMulSuppression is the value of hpnicfifBKbpsMulSuppressionMax.
.1.3.6.1.4.1.11.2.14.11.15.8.35.1.1.1.28,HPN-ICF-LswINF-MIB::hpnicfifUnknownPacketDropMul,INTEGER,read-write,,current,disable(1):enableInbound(2):enableOutbound(3):enableBoth(4),Control the port's unknown-multicast packets drop. When inbound direction is enabled on this port, the port will drop unknown-multicast packets in inbound direction. When outbound direction is enabled on this port, the port will drop unknown-multicast packets in outbound direction. When both directions are enabled on this port, the port will drop unknown-multicast packets in both inbound and outbound directions.
.1.3.6.1.4.1.11.2.14.11.15.8.35.1.1.1.29,HPN-ICF-LswINF-MIB::hpnicfifUnknownPacketDropUni,INTEGER,read-write,,current,disable(1):enableInbound(2):enableOutbound(3):enableBoth(4),Control the port's unknown-unicast packets drop. When inbound direction is enabled on this port, the port will drop unknown-unicast packets in inbound direction. When outbound direction is enabled on this port, the port will drop unknown-unicast packets in outbound direction. When both directions are enabled on this port, the port will drop unknown-unicast packets in both inbound and outbound directions.
.1.3.6.1.4.1.11.2.14.11.15.8.35.1.1.1.30,HPN-ICF-LswINF-MIB::hpnicfifBMbpsUniSuppressionMax,Integer32,read-only,,current,, The maximum value of the unicast suppression with bandwidth-based (Mbps) that a port can be configured.
.1.3.6.1.4.1.11.2.14.11.15.8.35.1.1.1.31,HPN-ICF-LswINF-MIB::hpnicfifBMbpsUniSuppression,Integer32,read-write,,current,, With bandwidth-based Unicast suppression, the bandwidth is measured in Mbps. The upper limit of the unicast suppession with bandwidth-based(Mbps) is the value of hpnicfifBMbpsUniSuppressionMax in the entry. The default value of hpnicfifBMbpsUniSuppression is the value of hpnicfifBMbpsUniSuppressionMax.
.1.3.6.1.4.1.11.2.14.11.15.8.35.1.1.1.32,HPN-ICF-LswINF-MIB::hpnicfifBKbpsUniSuppressionMax,Integer32,read-only,,current,, The maximum value of the unicast suppression with bandwidth-based (Kbps) that a port can be configured.
.1.3.6.1.4.1.11.2.14.11.15.8.35.1.1.1.33,HPN-ICF-LswINF-MIB::hpnicfifBKbpsUniSuppressionStep,Integer32,read-only,,current,, The step of unicast suppression with bandwidth-based(Kbps).
.1.3.6.1.4.1.11.2.14.11.15.8.35.1.1.1.34,HPN-ICF-LswINF-MIB::hpnicfifBKbpsUniSuppression,Integer32,read-write,,current,, With bandwidth-based unicast suppression, the bandwidth is measured in Kbps. The upper limit of the unicast suppession with bandwidth-based(Kbps) is the value of hpnicfifBKbpsUniSuppressionMax in the entry. The value of hpnicfifBKbpsUniSuppression must be multiple of the value of hpnicfifBKbpsUniSuppressionStep. The default value of hpnicfifBKbpsUniSuppression is the value of hpnicfifBKbpsUniSuppressionMax.
.1.3.6.1.4.1.11.2.14.11.15.8.35.1.1.1.35,HPN-ICF-LswINF-MIB::hpnicfifOutPayloadOctets,Counter64,read-only,,current,, The actual output octets of the interface.
.1.3.6.1.4.1.11.2.14.11.15.8.35.1.1.1.36,HPN-ICF-LswINF-MIB::hpnicfifInPayloadOctets,Counter64,read-only,,current,, The actual input octets of the interface.
.1.3.6.1.4.1.11.2.14.11.15.8.35.1.1.1.37,HPN-ICF-LswINF-MIB::hpnicfifInErrorPktsRate,Integer32,read-only,,current,, The rate of inbound error packets on the interface.
.1.3.6.1.4.1.11.2.14.11.15.8.35.1.1.1.38,HPN-ICF-LswINF-MIB::hpnicfifInPkts,Counter64,read-only,,current,, The number of packets received on the interface.
.1.3.6.1.4.1.11.2.14.11.15.8.35.1.1.1.39,HPN-ICF-LswINF-MIB::hpnicfifInNormalPkts,Counter64,read-only,,current,, The number of normal packets received on the interface.
.1.3.6.1.4.1.11.2.14.11.15.8.35.1.1.1.40,HPN-ICF-LswINF-MIB::hpnicfifOutPkts,Counter64,read-only,,current,, The number of packets sent on the interface.
.1.3.6.1.4.1.11.2.14.11.15.8.35.1.2,HPN-ICF-LswINF-MIB::hpnicfifAggregateTable,,not-accessible,,current,,Port aggregation information table.
.1.3.6.1.4.1.11.2.14.11.15.8.35.1.2.1,HPN-ICF-LswINF-MIB::hpnicfifAggregateEntry,,not-accessible,hpnicfifAggregatePortIndex,current,,Port aggregation information table.
.1.3.6.1.4.1.11.2.14.11.15.8.35.1.2.1.1,HPN-ICF-LswINF-MIB::hpnicfifAggregatePortIndex,Integer32,read-only,,current,,Index number of the main aggregated port.
.1.3.6.1.4.1.11.2.14.11.15.8.35.1.2.1.2,HPN-ICF-LswINF-MIB::hpnicfifAggregatePortName,OCTET,read-write,,current,,Aggregation group name.
.1.3.6.1.4.1.11.2.14.11.15.8.35.1.2.1.3,HPN-ICF-LswINF-MIB::hpnicfifAggregatePortListPorts,OCTET,read-write,,current,,Portlist of a aggregating.
.1.3.6.1.4.1.11.2.14.11.15.8.35.1.2.1.4,HPN-ICF-LswINF-MIB::hpnicfifAggregateModel,INTEGER,read-write,,current,ingress(1):both(2):round-robin(3),Load sharing mode for the port aggregation.
.1.3.6.1.4.1.11.2.14.11.15.8.35.1.2.1.5,HPN-ICF-LswINF-MIB::hpnicfifAggregateOperStatus,INTEGER,read-create,,current,active(1):notInService(2):notReady(3):createAndGo(4):createAndWait(5):destroy(6),Current operation status of the row.
.1.3.6.1.4.1.11.2.14.11.15.8.35.1.3,HPN-ICF-LswINF-MIB::hpnicfifHybridPortTable,,not-accessible,,current,,Hybrid-port configuration table.
.1.3.6.1.4.1.11.2.14.11.15.8.35.1.3.1,HPN-ICF-LswINF-MIB::hpnicfifHybridPortEntry,,not-accessible,hpnicfifHybridPortIndex,current,,Hybrid-port configuration table.
.1.3.6.1.4.1.11.2.14.11.15.8.35.1.3.1.1,HPN-ICF-LswINF-MIB::hpnicfifHybridPortIndex,INTEGER,read-only,,current,,Index number of Hybrid-port.
.1.3.6.1.4.1.11.2.14.11.15.8.35.1.3.1.2,HPN-ICF-LswINF-MIB::hpnicfifHybridTaggedVlanListLow,OCTET,read-write,,current,,Each octet within this value specifies a set of eight VLANs, with the first octet specifying VLANs 1 through 8, the second octet specifying VLANs 9 through 16, etc. Within each octet, the most significant bit represents the highest numbered VLAN, and the least significant bit represents the lowest numbered VLAN. Thus, each tagged VLAN of the hybrid port is represented by a single bit within the value of this object. If that bit has a value of '1' then that VLAN is tagged in the set of VLANs; the VLAN is not tagged if its bit has a value of '0'.
.1.3.6.1.4.1.11.2.14.11.15.8.35.1.3.1.3,HPN-ICF-LswINF-MIB::hpnicfifHybridTaggedVlanListHigh,OCTET,read-write,,current,,Each octet within this value specifies a set of eight VLANs, with the first octet specifying VLANs 2049 through 2056, the second octet specifying VLANs 2057 through 2064, etc. Within each octet, the most significant bit represents the highest numbered VLAN, and the least significant bit represents the lowest numbered VLAN. Thus, each tagged VLAN of the hybrid port is represented by a single bit within the value of this object. If that bit has a value of '1' then that VLAN is tagged in the set of VLANs; the VLAN is not tagged if its bit has a value of '0'.
.1.3.6.1.4.1.11.2.14.11.15.8.35.1.3.1.4,HPN-ICF-LswINF-MIB::hpnicfifHybridUnTaggedVlanListLow,OCTET,read-write,,current,,Each octet within this value specifies a set of eight VLANs, with the first octet specifying VLANs 1 through 8, the second octet specifying VLANs 9 through 16, etc. Within each octet, the most significant bit represents the highest numbered VLAN, and the least significant bit represents the lowest numbered VLAN. Thus, each untagged VLAN of the hybrid port is represented by a single bit within the value of this object. If that bit has a value of '1' then that VLAN is untagged in the set of VLANs; the VLAN is not untagged if its bit has a value of '0'.
.1.3.6.1.4.1.11.2.14.11.15.8.35.1.3.1.5,HPN-ICF-LswINF-MIB::hpnicfifHybridUnTaggedVlanListHigh,OCTET,read-write,,current,,Each octet within this value specifies a set of eight VLANs, with the first octet specifying VLANs 2049 through 2056, the second octet specifying VLANs 2057 through 2064, etc. Within each octet, the most significant bit represents the highest numbered VLAN, and the least significant bit represents the lowest numbered VLAN. Thus, each untagged VLAN of the hybrid port is represented by a single bit within the value of this object. If that bit has a value of '1' then that VLAN is untagged in the set of VLANs; the VLAN is not untagged if its bit has a value of '0'.
.1.3.6.1.4.1.11.2.14.11.15.8.35.1.4,HPN-ICF-LswINF-MIB::hpnicfifComboPortTable,,not-accessible,,current,,Combo-port table.
.1.3.6.1.4.1.11.2.14.11.15.8.35.1.4.1,HPN-ICF-LswINF-MIB::hpnicfifComboPortEntry,,not-accessible,hpnicfifComboPortIndex,current,,The entry of hpnicfifComboPortTable.
.1.3.6.1.4.1.11.2.14.11.15.8.35.1.4.1.1,HPN-ICF-LswINF-MIB::hpnicfifComboPortIndex,Integer32,read-only,,current,,The combo-port interface index. Its value is the same as the value of ifIndex in ifTable, but only includes indexes of the combo-port interfaces.
.1.3.6.1.4.1.11.2.14.11.15.8.35.1.4.1.2,HPN-ICF-LswINF-MIB::hpnicfifComboPortCurActive,INTEGER,read-write,,current,fiber(1):copper(2):na(3),Current active interface of combo interfaces. The value 'fiber' means the interface with fiber connector of the pair of combo-port interfaces is active. The value 'copper' means the interface with copper connector of the pair is active. The value 'na' means not supported.
.1.3.6.1.4.1.11.2.14.11.15.8.35.1.5,HPN-ICF-LswINF-MIB::hpnicfifPktBufTable,,not-accessible,,current,,Packet buffer table.
.1.3.6.1.4.1.11.2.14.11.15.8.35.1.5.1,HPN-ICF-LswINF-MIB::hpnicfifPktBufEntry,,not-accessible,ifIndex,current,,The entry of hpnicfifPktBufTable.
.1.3.6.1.4.1.11.2.14.11.15.8.35.1.5.1.1,HPN-ICF-LswINF-MIB::hpnicfifPktBufFree,Integer32,read-only,,current,,The number of packet buffers available for the interface.
.1.3.6.1.4.1.11.2.14.11.15.8.35.1.5.1.2,HPN-ICF-LswINF-MIB::hpnicfifPktBufInit,Integer32,read-only,,current,,The number of packet buffers allocated when the interface was created.
.1.3.6.1.4.1.11.2.14.11.15.8.35.1.5.1.3,HPN-ICF-LswINF-MIB::hpnicfifPktBufMin,Integer32,read-only,,current,,The smallest number of packet buffers available for the interface.
.1.3.6.1.4.1.11.2.14.11.15.8.35.1.5.1.4,HPN-ICF-LswINF-MIB::hpnicfifPktBufMiss,Counter64,read-only,,current,,The number of times that the interface failed to obtain a packet buffer. Failure to obtain a buffer indicates that buffers were busy.
.1.3.6.1.4.1.11.2.14.11.15.8.35.2,HPN-ICF-OID-MIB::hpnicfLswVlan,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.8.35.2.1,HPN-ICF-LswVLAN-MIB::hpnicfLswVlanMngObject,,,,,,Description.
.1.3.6.1.4.1.11.2.14.11.15.8.35.2.1.1,HPN-ICF-LswVLAN-MIB::hpnicfdot1qVlanMIBTable,,not-accessible,,current,,VLAN MIB table
.1.3.6.1.4.1.11.2.14.11.15.8.35.2.1.1.1,HPN-ICF-LswVLAN-MIB::hpnicfdot1qVlanMIBEntry,,not-accessible,hpnicfdot1qVlanIndex,current,,Entries of VLAN MIB table
.1.3.6.1.4.1.11.2.14.11.15.8.35.2.1.1.1.1,HPN-ICF-LswVLAN-MIB::hpnicfdot1qVlanIndex,Integer32,read-only,,current,,The VLAN-ID.
.1.3.6.1.4.1.11.2.14.11.15.8.35.2.1.1.1.2,HPN-ICF-LswVLAN-MIB::hpnicfdot1qVlanName,OCTET,read-write,,current,,Name of the VLAN.
.1.3.6.1.4.1.11.2.14.11.15.8.35.2.1.1.1.3,HPN-ICF-LswVLAN-MIB::hpnicfdot1qVlanPorts,OCTET,read-write,,current,,Port list of the VLAN.
.1.3.6.1.4.1.11.2.14.11.15.8.35.2.1.1.1.4,HPN-ICF-LswVLAN-MIB::hpnicfdot1qVlanType,INTEGER,read-write,,current,superVlan(1):common-vlan(2):sub-vlan(3):isolate-user-vlan(4):secondary-vlan(5):primaryVlan(6),Vlan types: SuperVlan(1), Common vlan(2), and Sub-vlan(3).
.1.3.6.1.4.1.11.2.14.11.15.8.35.2.1.1.1.5,HPN-ICF-LswVLAN-MIB::hpnicfdot1qVlanMacFilter,INTEGER,read-only,,current,true(1):false(2),Whether to filter MAC addresses.
.1.3.6.1.4.1.11.2.14.11.15.8.35.2.1.1.1.6,HPN-ICF-LswVLAN-MIB::hpnicfdot1qVlanMcastUnknownProtos,INTEGER,read-only,,current,true(1):false(2),Whether to broadcast the unknown packets.
.1.3.6.1.4.1.11.2.14.11.15.8.35.2.1.1.1.7,HPN-ICF-LswVLAN-MIB::hpnicfExistInterface,INTEGER,read-only,,current,true(1):false(2),Whether there is virtual interface.
.1.3.6.1.4.1.11.2.14.11.15.8.35.2.1.1.1.8,HPN-ICF-LswVLAN-MIB::hpnicfVlanInterfaceIndex,INTEGER,read-only,,current,,Whether vlan interface is configured on vlan. If vlan interface is configured, the value of the node is vlan id, else the value is 0.
.1.3.6.1.4.1.11.2.14.11.15.8.35.2.1.1.1.9,HPN-ICF-LswVLAN-MIB::hpnicfdot1qVlanMacLearn,INTEGER,read-only,,current,true(1):false(2),MAC address learning identity. (common vlan/Sub-vlan)
.1.3.6.1.4.1.11.2.14.11.15.8.35.2.1.1.1.10,HPN-ICF-LswVLAN-MIB::hpnicfdot1qVlanStatus,INTEGER,read-only,,current,other(1):static(2):dynamic(3),Status of the VLAN.
.1.3.6.1.4.1.11.2.14.11.15.8.35.2.1.1.1.11,HPN-ICF-LswVLAN-MIB::hpnicfdot1qVlanCreationTime,TimeTicks,read-only,,current,,The sysUPTime when the VLAN is created.
.1.3.6.1.4.1.11.2.14.11.15.8.35.2.1.1.1.12,HPN-ICF-LswVLAN-MIB::hpnicfdot1qVlanPriority,INTEGER,read-write,,current,,Priority of the VLAN.
.1.3.6.1.4.1.11.2.14.11.15.8.35.2.1.1.1.13,HPN-ICF-LswVLAN-MIB::hpnicfdot1qVlanRowStatus,INTEGER,read-create,,current,active(1):notInService(2):notReady(3):createAndGo(4):createAndWait(5):destroy(6),Operation status.
.1.3.6.1.4.1.11.2.14.11.15.8.35.2.1.1.1.14,HPN-ICF-LswVLAN-MIB::hpnicfdot1qVlanBroadcastSuppression,INTEGER,read-write,,current,,Whether broadcast suppression of vlan be supported pro rata. The vlaue of 100 indicates no broadcast suppression. If the function is not supported, this object cannot be written, and 100 will be returned when reading
.1.3.6.1.4.1.11.2.14.11.15.8.35.2.1.1.1.15,HPN-ICF-LswVLAN-MIB::hpnicfdot1qVlanBcastSuppressionPPS,INTEGER,read-write,,current,,If the broadcast can be controlled with pps(packet per second)type, the value of 0 indicates no suppression. This node is conflicted with hpnicfdot1qVlanBroadcastSuppression. If the mode is set, hpnicfdot1qVlanBroadcastSuppression is unavailable. And vice versa.
.1.3.6.1.4.1.11.2.14.11.15.8.35.2.1.1.1.16,HPN-ICF-LswVLAN-MIB::hpnicfdot1qVlanMulticast,INTEGER,read-write,,current,disable(0):enable(1),Multicast vlan. The default value is disable(0).
.1.3.6.1.4.1.11.2.14.11.15.8.35.2.1.1.1.17,HPN-ICF-LswVLAN-MIB::hpnicfdot1qVlanTaggedPorts,OCTET,read-only,,current,,Tagged port list of the VLAN.
.1.3.6.1.4.1.11.2.14.11.15.8.35.2.1.1.1.18,HPN-ICF-LswVLAN-MIB::hpnicfdot1qVlanUntaggedPorts,OCTET,read-only,,current,,Untagged port list of the VLAN.
.1.3.6.1.4.1.11.2.14.11.15.8.35.2.1.1.1.19,HPN-ICF-LswVLAN-MIB::hpnicfdot1qVlanPortIndexs,OCTET,read-write,,current,,PortIndex list of the VLAN, that delimited by comma, such as 1,3,4,7.
.1.3.6.1.4.1.11.2.14.11.15.8.35.2.1.2,HPN-ICF-LswVLAN-MIB::hpnicfVlanInterfaceTable,,not-accessible,,current,,Virtual interface configuration table
.1.3.6.1.4.1.11.2.14.11.15.8.35.2.1.2.1,HPN-ICF-LswVLAN-MIB::hpnicfVlanInterfaceEntry,,not-accessible,hpnicfVlanInterfaceID,current,,Entries of virtual interface configuration table
.1.3.6.1.4.1.11.2.14.11.15.8.35.2.1.2.1.1,HPN-ICF-LswVLAN-MIB::hpnicfVlanInterfaceID,INTEGER,read-only,,current,,Index of the vlan interface table.
.1.3.6.1.4.1.11.2.14.11.15.8.35.2.1.2.1.2,HPN-ICF-LswVLAN-MIB::hpnicfdot1qVlanID,Integer32,read-only,,current,,VLAN-ID
.1.3.6.1.4.1.11.2.14.11.15.8.35.2.1.2.1.3,HPN-ICF-LswVLAN-MIB::hpnicfdot1qVlanIpAddress,IpAddress,read-write,,current,,IP address of interface.
.1.3.6.1.4.1.11.2.14.11.15.8.35.2.1.2.1.4,HPN-ICF-LswVLAN-MIB::hpnicfdot1qVlanIpAddressMask,IpAddress,read-write,,current,,IP address mask of interface.
.1.3.6.1.4.1.11.2.14.11.15.8.35.2.1.2.1.5,HPN-ICF-LswVLAN-MIB::hpnicfVlanInterfaceAdminStatus,INTEGER,read-write,,current,up(1):down(2),Status of VLAN virtual interfaces.
.1.3.6.1.4.1.11.2.14.11.15.8.35.2.1.2.1.6,HPN-ICF-LswVLAN-MIB::hpnicfVlanInterfaceFrameType,INTEGER,read-only,,current,ethernet-ii(1):ethernet-snap(2):ethernet-8022(3):ethernet-8023(4),Frame type accepted by VLAN virtual interfaces.
.1.3.6.1.4.1.11.2.14.11.15.8.35.2.1.2.1.7,HPN-ICF-LswVLAN-MIB::hpnicfInterfaceRowStatus,INTEGER,read-create,,current,active(1):notInService(2):notReady(3):createAndGo(4):createAndWait(5):destroy(6),Operation status.
.1.3.6.1.4.1.11.2.14.11.15.8.35.2.1.2.1.8,HPN-ICF-LswVLAN-MIB::hpnicfVlanInterfaceIpMethod,INTEGER,read-write,,current,assigned-ip(1):dhcp-ip(2):bootp-ip(3),Vlan interface ip address acquiring method which is manual, dhcp or bootp.
.1.3.6.1.4.1.11.2.14.11.15.8.35.2.1.2.1.9,HPN-ICF-LswVLAN-MIB::hpnicfVlanInterfaceIfIndex,INTEGER,read-only,,current,,IfIndex of VLAN interface.
.1.3.6.1.4.1.11.2.14.11.15.8.35.2.1.4,HPN-ICF-LswVLAN-MIB::hpnicfifIsolateMappingTable,,not-accessible,,current,,Secondary vlan lists of Isolate-VLANs.
.1.3.6.1.4.1.11.2.14.11.15.8.35.2.1.4.1,HPN-ICF-LswVLAN-MIB::hpnicfifIsolateMappingEntry,,not-accessible,hpnicfifIsolatePrimaryVlanID,current,,Secondary vlan lists of Isolate-VLANs.
.1.3.6.1.4.1.11.2.14.11.15.8.35.2.1.4.1.1,HPN-ICF-LswVLAN-MIB::hpnicfifIsolatePrimaryVlanID,Integer32,read-only,,current,,Primary VLAN-ID.
.1.3.6.1.4.1.11.2.14.11.15.8.35.2.1.4.1.2,HPN-ICF-LswVLAN-MIB::hpnicfifIsolateSecondaryVlanlistLow,OCTET,read-write,,current,,Each octet within this value specifies a set of eight VLANs, with the first octet specifying VLANs 1 through 8, the second octet specifying VLANs 9 through 16, etc. Within each octet, the most significant bit represents the highest numbered VLAN, and the least significant bit represents the lowest numbered VLAN. Thus, each secondary VLAN of the primary VLAN is represented by a single bit within the value of this object. If that bit has a value of '1' then that VLAN is secondary VLAN in the set of VLANs; the VLAN is not secondary VLAN if its bit has a value of '0'.
.1.3.6.1.4.1.11.2.14.11.15.8.35.2.1.4.1.3,HPN-ICF-LswVLAN-MIB::hpnicfifIsolateSecondaryVlanlistHigh,OCTET,read-write,,current,,Each octet within this value specifies a set of eight VLANs, with the first octet specifying VLANs 2049 through 2056, the second octet specifying VLANs 2057 through 2064, etc. Within each octet, the most significant bit represents the highest numbered VLAN, and the least significant bit represents the lowest numbered VLAN. Thus, each secondary VLAN of the primary VLAN is represented by a single bit within the value of this object. If that bit has a value of '1' then that VLAN is secondary VLAN in the set of VLANs; the VLAN is not secondary VLAN if its bit has a value of '0'.
.1.3.6.1.4.1.11.2.14.11.15.8.35.2.1.5,HPN-ICF-LswVLAN-MIB::hpnicfVlanInterfaceAddrTable,,not-accessible,,current,,VLAN interface IP address configuration table
.1.3.6.1.4.1.11.2.14.11.15.8.35.2.1.5.1,HPN-ICF-LswVLAN-MIB::hpnicfVlanInterfaceAddrEntry,,not-accessible,hpnicfVlanInterfaceIpIfIndex:hpnicfVlanInterfaceIpAddr,current,,Entries of VLAN interface IP address configuration table
.1.3.6.1.4.1.11.2.14.11.15.8.35.2.1.5.1.1,HPN-ICF-LswVLAN-MIB::hpnicfVlanInterfaceIpIfIndex,INTEGER,read-only,,current,,Index of VLAN interfaces.
.1.3.6.1.4.1.11.2.14.11.15.8.35.2.1.5.1.2,HPN-ICF-LswVLAN-MIB::hpnicfVlanInterfaceIpAddr,IpAddress,read-only,,current,,IP address of VLAN interface.
.1.3.6.1.4.1.11.2.14.11.15.8.35.2.1.5.1.3,HPN-ICF-LswVLAN-MIB::hpnicfVlanInterfaceIpMask,IpAddress,read-create,,current,,IP address mask of VLAN interface. When destory single IP address, you must set it correct to relative IP address.
.1.3.6.1.4.1.11.2.14.11.15.8.35.2.1.5.1.4,HPN-ICF-LswVLAN-MIB::hpnicfVlanInterfaceIpType,INTEGER,read-create,,current,primary(1):sub(2):cluster(3):vrrp(4),IP address type.
.1.3.6.1.4.1.11.2.14.11.15.8.35.2.1.5.1.5,HPN-ICF-LswVLAN-MIB::hpnicfVlanInterfaceIpRowStatus,INTEGER,read-create,,current,active(1):notInService(2):notReady(3):createAndGo(4):createAndWait(5):destroy(6),Operation status. active(1) will only be set when taking GET or GET NEXT operation. createAndGo(4) and destory(6) is valid when taking SET operation.
.1.3.6.1.4.1.11.2.14.11.15.8.35.2.1.6,HPN-ICF-LswVLAN-MIB::hpnicfDot1qVlanBatchMIBTable,,not-accessible,,current,,VLAN batch configuration table. In the case of VLAN batch creation, hpnicfdot1qVlanBatchSetOperate should be set to 1. For example, if creating a row is for creating VLANs 2 to 4, the value of the objects should be set as follows: hpnicfdot1qVlanBatchStartIndex 2, hpnicfdot1qVlanBatchEndIndex 4, hpnicfdot1qVlanBatchSetOperate create(1), hpnicfdot1qVlanBatchRowStatus createAndGo(4). In the case of VLAN batch deletion, hpnicfdot1qVlanBatchSetOperate should be set to 2. For example, if creating a row is for deleting VLANs 10 to 20, the value of the objects should be set as follows: hpnicfdot1qVlanBatchStartIndex 10, hpnicfdot1qVlanBatchEndIndex 20, hpnicfdot1qVlanBatchSetOperate delete(2), hpnicfdot1qVlanBatchRowStatus createAndGo(4). When the action of batch VLANs deleting or creating is done, one row will be existent until it is deleted manually or ages out, but the VLANs of it won't disappear with the deletion of the row.
.1.3.6.1.4.1.11.2.14.11.15.8.35.2.1.6.1,HPN-ICF-LswVLAN-MIB::hpnicfDot1qVlanBatchMIBEntry,,not-accessible,hpnicfdot1qVlanBatchOperIndex,current,,VLAN batch configuration entry.
.1.3.6.1.4.1.11.2.14.11.15.8.35.2.1.6.1.1,HPN-ICF-LswVLAN-MIB::hpnicfdot1qVlanBatchOperIndex,Integer32,read-only,,current,,The consequence of operation.
.1.3.6.1.4.1.11.2.14.11.15.8.35.2.1.6.1.2,HPN-ICF-LswVLAN-MIB::hpnicfdot1qVlanBatchStartIndex,Integer32,read-write,,current,,The value of start VLAN-ID.
.1.3.6.1.4.1.11.2.14.11.15.8.35.2.1.6.1.3,HPN-ICF-LswVLAN-MIB::hpnicfdot1qVlanBatchEndIndex,Integer32,read-write,,current,,The value of end VLAN-ID.
.1.3.6.1.4.1.11.2.14.11.15.8.35.2.1.6.1.4,HPN-ICF-LswVLAN-MIB::hpnicfdot1qVlanBatchOperStatus,INTEGER,read-only,,current,opInprogress(1):opfailure(2):opsuccess(3):opsuccesspartial(4),The status of operation.
.1.3.6.1.4.1.11.2.14.11.15.8.35.2.1.6.1.5,HPN-ICF-LswVLAN-MIB::hpnicfdot1qVlanBatchRowStatus,INTEGER,read-create,,current,active(1):notInService(2):notReady(3):createAndGo(4):createAndWait(5):destroy(6),The row status of HpnicfDot1qVlanBatchMIBEntry.
.1.3.6.1.4.1.11.2.14.11.15.8.35.2.1.6.1.6,HPN-ICF-LswVLAN-MIB::hpnicfdot1qVlanBatchSetOperate,INTEGER,read-create,,current,create(1):delete(2),VLAN batch creation or deletion.
.1.3.6.1.4.1.11.2.14.11.15.8.35.2.1.7,HPN-ICF-LswVLAN-MIB::hpnicfifSuperVlanMappingTable,,not-accessible,,current,,Sub VLAN lists of super-VLANs.
.1.3.6.1.4.1.11.2.14.11.15.8.35.2.1.7.1,HPN-ICF-LswVLAN-MIB::hpnicfifSuperVlanMappingEntry,,not-accessible,hpnicfifSuperVlanID,current,,Sub VLAN lists of super-VLANs.
.1.3.6.1.4.1.11.2.14.11.15.8.35.2.1.7.1.1,HPN-ICF-LswVLAN-MIB::hpnicfifSuperVlanID,Integer32,read-only,,current,,Super VLAN ID.
.1.3.6.1.4.1.11.2.14.11.15.8.35.2.1.7.1.2,HPN-ICF-LswVLAN-MIB::hpnicfifSubVlanlistLow,OCTET,read-write,,current,,Each octet within this value specifies a set of eight VLANs, with the first octet specifying VLANs 1 through 8, the second octet specifying VLANs 9 through 16, etc. Within each octet, the most significant bit represents the highest numbered VLAN, and the least significant bit represents the lowest numbered VLAN. Thus, each sub VLAN of the super VLAN is represented by a single bit within the value of this object. If that bit has a value of '1' then that VLAN is a sub VLAN of the super VLAN; the VLAN is not a sub VLAN of the super VLAN if its bit has a value of '0'.
.1.3.6.1.4.1.11.2.14.11.15.8.35.2.1.7.1.3,HPN-ICF-LswVLAN-MIB::hpnicfifSubVlanlistHigh,OCTET,read-write,,current,,Each octet within this value specifies a set of eight VLANs, with the first octet specifying VLANs 2049 through 2056, the second octet specifying VLANs 2057 through 2064, etc. Within each octet, the most significant bit represents the highest numbered VLAN, and the least significant bit represents the lowest numbered VLAN. Thus, each sub VLAN of the super VLAN is represented by a single bit within the value of this object. If that bit has a value of '1' then that VLAN is a sub VLAN of the super VLAN; the VLAN is not a sub VLAN of the super VLAN if its bit has a value of '0'.
.1.3.6.1.4.1.11.2.14.11.15.8.35.2.1.8,HPN-ICF-LswVLAN-MIB::hpnicfPrivateVlanMappingTable,,not-accessible,,current,,Secondary vlan lists of Primary-VLANs.
.1.3.6.1.4.1.11.2.14.11.15.8.35.2.1.8.1,HPN-ICF-LswVLAN-MIB::hpnicfPrivateVlanMappingEntry,,not-accessible,hpnicfPrimaryVlanID,current,,Secondary vlan lists of Primary-VLANs.
.1.3.6.1.4.1.11.2.14.11.15.8.35.2.1.8.1.1,HPN-ICF-LswVLAN-MIB::hpnicfPrimaryVlanID,Integer32,read-only,,current,,Primary VLAN-ID.
.1.3.6.1.4.1.11.2.14.11.15.8.35.2.1.8.1.2,HPN-ICF-LswVLAN-MIB::hpnicfSecondaryVlanlistLow,OCTET,read-write,,current,,Each octet within this value specifies a set of eight VLANs, with the first octet specifying VLANs 1 through 8, the second octet specifying VLANs 9 through 16, etc.  Within each octet, the most significant bit represents the highest numbered VLAN, and the least significant bit represents the lowest numbered VLAN. Thus, each secondary VLAN of the primary VLAN is represented by a single bit within the value of this object. If that bit has a value of '1' then that VLAN is secondary VLAN in the set of VLANs; the VLAN is not secondary VLAN if its bit has a value of '0'.
.1.3.6.1.4.1.11.2.14.11.15.8.35.2.1.8.1.3,HPN-ICF-LswVLAN-MIB::hpnicfSecondaryVlanlistHigh,OCTET,read-write,,current,,Each octet within this value specifies a set of eight VLANs, with the first octet specifying VLANs 2049 through 2056, the second octet specifying VLANs 2057 through 2064, etc. Within each octet, the most significant bit represents the highest numbered VLAN, and the least significant bit represents the lowest numbered VLAN. Thus, each secondary VLAN of the primary VLAN is represented by a single bit within the value of this object. If that bit has a value of '1' then that VLAN is secondary VLAN in the set of VLANs; the VLAN is not secondary VLAN if its bit has a value of '0'.
.1.3.6.1.4.1.11.2.14.11.15.8.35.2.2,HPN-ICF-LswVLAN-MIB::hpnicfLswVlanProtoObject,,,,,,Description.
.1.3.6.1.4.1.11.2.14.11.15.8.35.2.2.14,HPN-ICF-LswVLAN-MIB::hpnicfVLANMibGarpLeaveAllTime,INTEGER,read-write,,current,,The GARP LeaveAll time, in centiseconds.
.1.3.6.1.4.1.11.2.14.11.15.8.35.2.2.15,HPN-ICF-LswVLAN-MIB::hpnicfvLANMibSwitchCountTable,,not-accessible,,current,,A table containing the information various statistics of switch.
.1.3.6.1.4.1.11.2.14.11.15.8.35.2.2.15.1,HPN-ICF-LswVLAN-MIB::hpnicfvLANMibSwitchCountEntry,,not-accessible,,current,,A table containing the information various statistics of switch.
.1.3.6.1.4.1.11.2.14.11.15.8.35.2.2.15.1.1,HPN-ICF-LswVLAN-MIB::hpnicfVLANMibSwitchGMRPRXPkt,Counter32,read-only,,current,,Number of GMRP frames received.
.1.3.6.1.4.1.11.2.14.11.15.8.35.2.2.15.1.2,HPN-ICF-LswVLAN-MIB::hpnicfVLANMibSwitchGVRPRXPkt,Counter32,read-only,,current,,Number of GVRP frames received.
.1.3.6.1.4.1.11.2.14.11.15.8.35.2.2.15.1.3,HPN-ICF-LswVLAN-MIB::hpnicfVLANMibSwitchGMRPTXPkt,Counter32,read-only,,current,,Number of GMRP frames transmitted.
.1.3.6.1.4.1.11.2.14.11.15.8.35.2.2.15.1.4,HPN-ICF-LswVLAN-MIB::hpnicfVLANMibSwitchGVRPTXPkt,Counter32,read-only,,current,,Number of GVRP frames transmitted.
.1.3.6.1.4.1.11.2.14.11.15.8.35.2.2.15.1.5,HPN-ICF-LswVLAN-MIB::hpnicfVLANMibSwitchDiscardedPkt,Counter32,read-only,,current,,Number of discarded frames.
.1.3.6.1.4.1.11.2.14.11.15.8.35.2.2.15.1.6,HPN-ICF-LswVLAN-MIB::hpnicfVLANMibSwitchGarpStatClear,INTEGER,read-write,,current,clear(1),Clear various Statistics viz. read operation not supported.
.1.3.6.1.4.1.11.2.14.11.15.8.35.2.2.16,HPN-ICF-LswVLAN-MIB::hpnicfvLANMibHoldTimeTable,,not-accessible,,current,,A table for setting/getting the Hold Time for a particular port.
.1.3.6.1.4.1.11.2.14.11.15.8.35.2.2.16.1,HPN-ICF-LswVLAN-MIB::hpnicfvLANMibHoldTimeEntry,,not-accessible,,current,,A table for setting/getting the HoldTime of the port.
.1.3.6.1.4.1.11.2.14.11.15.8.35.2.2.16.1.1,HPN-ICF-LswVLAN-MIB::hpnicfVLANMibHoldTime,INTEGER,read-write,,current,,HoldTime of the port.
.1.3.6.1.4.1.11.2.14.11.15.8.35.3,HPN-ICF-OID-MIB::hpnicfLswMacPort,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.8.35.3.1,HPN-ICF-LswMAM-MIB::hpnicfdot1qMacSearchTable,,not-accessible,,current,,Information table for searching port with mac address 
.1.3.6.1.4.1.11.2.14.11.15.8.35.3.1.1,HPN-ICF-LswMAM-MIB::hpnicfdot1qMacSearchEntry,,not-accessible,hpnicfdot1qMacSearchAddress:hpnicfdot1qMacSearchVlanID,current,, Information table for searching port with mac address entry 
.1.3.6.1.4.1.11.2.14.11.15.8.35.3.1.1.1,HPN-ICF-LswMAM-MIB::hpnicfdot1qMacSearchAddress,OCTET,read-only,,current,,MAC address
.1.3.6.1.4.1.11.2.14.11.15.8.35.3.1.1.2,HPN-ICF-LswMAM-MIB::hpnicfdot1qMacSearchVlanID,INTEGER,read-only,,current,, VLANID of the native VLAN of the MAC address to be searched for 
.1.3.6.1.4.1.11.2.14.11.15.8.35.3.1.1.3,HPN-ICF-LswMAM-MIB::hpnicfdot1qMacSearchPort,Integer32,read-only,,current,,Interface index corresponding to the MAC address
.1.3.6.1.4.1.11.2.14.11.15.8.35.3.1.1.4,HPN-ICF-LswMAM-MIB::hpnicfdot1qMacSearchAgeTime,INTEGER,read-only,,current,, Address aging time
.1.3.6.1.4.1.11.2.14.11.15.8.35.3.2,HPN-ICF-LswMAM-MIB::hpnicfdot1qTpFdbSetTable,,not-accessible,,current,,Unicast address setting table 
.1.3.6.1.4.1.11.2.14.11.15.8.35.3.2.1,HPN-ICF-LswMAM-MIB::hpnicfdot1qTpFdbSetEntry,,not-accessible,hpnicfdot1qVlanIndex:hpnicfdot1qTpFdbSetAddress,current,, Unicast address setting table entry 
.1.3.6.1.4.1.11.2.14.11.15.8.35.3.2.1.1,HPN-ICF-LswMAM-MIB::hpnicfdot1qTpFdbSetAddress,OCTET,not-accessible,,current,,Unicast MAC address 
.1.3.6.1.4.1.11.2.14.11.15.8.35.3.2.1.2,HPN-ICF-LswMAM-MIB::hpnicfdot1qTpFdbSetPort,Integer32,read-write,,current,,Interface index corresponding to the MAC address 
.1.3.6.1.4.1.11.2.14.11.15.8.35.3.2.1.3,HPN-ICF-LswMAM-MIB::hpnicfdot1qTpFdbSetStatus,INTEGER,read-write,,current,other(1):learned(3):static(6):dynamic(7):blackhole(9):security(11),State corresponding to the MAC address
.1.3.6.1.4.1.11.2.14.11.15.8.35.3.2.1.4,HPN-ICF-LswMAM-MIB::hpnicfdot1qTpFdbSetOperate,INTEGER,read-write,,current,add(1):delete(2),Add or delete an MAC address. Read operation not supported.
.1.3.6.1.4.1.11.2.14.11.15.8.35.3.3,HPN-ICF-LswMAM-MIB::hpnicfdot1qTpFdbGroupSetTable,,not-accessible,,current,,Multistcast address setting table, whose maximal row number is dynamically changed by the influence of IGSP. When reaching the upper limit of the table, no more row could be added, then an error will be returned.
.1.3.6.1.4.1.11.2.14.11.15.8.35.3.3.1,HPN-ICF-LswMAM-MIB::hpnicfdot1qTpFdbGroupSetEntry,,not-accessible,hpnicfdot1qVlanIndex:hpnicfdot1qTpFdbGroupSetAddress,current,,Multicast address setting table entry.
.1.3.6.1.4.1.11.2.14.11.15.8.35.3.3.1.1,HPN-ICF-LswMAM-MIB::hpnicfdot1qTpFdbGroupSetAddress,OCTET,not-accessible,,current,,Multicast MAC address.
.1.3.6.1.4.1.11.2.14.11.15.8.35.3.3.1.2,HPN-ICF-LswMAM-MIB::hpnicfdot1qTpFdbGroupSetPort,OCTET,read-write,,current,,The complete set of ports, in this VLAN, to which frames destined to this Multicast MAC address are currently being explicitly forwarded. This does not include ports for which this address is only implicitly forwarded.
.1.3.6.1.4.1.11.2.14.11.15.8.35.3.3.1.3,HPN-ICF-LswMAM-MIB::hpnicfdot1qTpFdbGroupSetOperate,INTEGER,read-write,,current,add(1):delete(2),Add or delete a Multicast MAC address. Read operation is meaningless. When adding a Multicast MAC address, it is required to provide MacAddress, VLAN and PortList all. For deleting operation, MacAddress and VLAN must be provided, but hpnicfdot1qTpFdbGroupSetPort is optional.
.1.3.6.1.4.1.11.2.14.11.15.8.35.4,HPN-ICF-OID-MIB::hpnicfLswArpMib,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.8.35.4.1,HPN-ICF-LswARP-MIB::hpnicfLswProxyArpObject,,,,,,Description.
.1.3.6.1.4.1.11.2.14.11.15.8.35.4.1.1,HPN-ICF-LswARP-MIB::hpnicfLswProxyArpEnableTable,,not-accessible,,current,,Contains information that if proxy ARP enabled for every VLAN interface. 
.1.3.6.1.4.1.11.2.14.11.15.8.35.4.1.1.1,HPN-ICF-LswARP-MIB::hpnicfLswProxyArpEnableEntry,,not-accessible,hpnicfLswIfIndex,current,,Contains information that if proxy ARP enabled for VLAN interface.
.1.3.6.1.4.1.11.2.14.11.15.8.35.4.1.1.1.1,HPN-ICF-LswARP-MIB::hpnicfLswIfIndex,INTEGER,read-only,,current,, Vlan interface index 
.1.3.6.1.4.1.11.2.14.11.15.8.35.4.1.1.1.2,HPN-ICF-LswARP-MIB::hpnicfLswProxyArpStatus,INTEGER,read-write,,current,disabled(0):enabled(1), Proxy ARP status for this VLAN interface.
.1.3.6.1.4.1.11.2.14.11.15.8.35.5,HPN-ICF-OID-MIB::hpnicfLswL2InfMib,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.8.35.5.1,HPN-ICF-LswINF-MIB::hpnicfLswL2InfMibObject,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.8.35.5.1.1,HPN-ICF-LswINF-MIB::hpnicfSlotPortMax,INTEGER,read-only,,current,,Max ports of the slots.
.1.3.6.1.4.1.11.2.14.11.15.8.35.5.1.2,HPN-ICF-LswINF-MIB::hpnicfSwitchPortMax,INTEGER,read-only,,current,,Max ports that this switch includes.
.1.3.6.1.4.1.11.2.14.11.15.8.35.5.1.3,HPN-ICF-LswINF-MIB::hpnicfifVLANTrunkStatusTable,,not-accessible,,current,,Gvrp attributes on the VlanTrunk port.
.1.3.6.1.4.1.11.2.14.11.15.8.35.5.1.3.1,HPN-ICF-LswINF-MIB::hpnicfifVLANTrunkStatusEntry,,not-accessible,hpnicfifVLANTrunkIndex,current,,Gvrp attributes on the VlanTrunk port.
.1.3.6.1.4.1.11.2.14.11.15.8.35.5.1.3.1.1,HPN-ICF-LswINF-MIB::hpnicfifVLANTrunkIndex,Integer32,read-only,,current,,Index number of the VLANTrunk interface.
.1.3.6.1.4.1.11.2.14.11.15.8.35.5.1.3.1.2,HPN-ICF-LswINF-MIB::hpnicfifVLANTrunkGvrpRegistration,INTEGER,read-write,,current,normal(1):fixed(2):forbidden(3),GVRP registration information normal: This is the default configuration. Allow create, register and unregister vlans dynamiclly at this port. fixed: Aallow create and register vlan manually at this port. Prevent from unregistering vlans or registering known vlans of this port at another trunk port. forbidden: Unregister all vlans but vlan 1, forbid to create or register any other vlans at this port.
.1.3.6.1.4.1.11.2.14.11.15.8.35.5.1.3.1.4,HPN-ICF-LswINF-MIB::hpnicfifVLANTrunkPassListLow,OCTET,read-only,,current,,Each octet within this value specifies a set of eight VLANs, with the first octet specifying VLANs 1 through 8, the second octet specifying VLANs 9 through 16, etc. Within each octet, the most significant bit represents the highest numbered VLAN, and the least significant bit represents the lowest numbered VLAN. Thus, each actually passed VLAN of the trunk port is represented by a single bit within the value of this object. If that bit has a value of '1' then that VLAN is actually passed in the set of VLANs; the VLAN is not actually passed if its bit has a value of '0'.
.1.3.6.1.4.1.11.2.14.11.15.8.35.5.1.3.1.5,HPN-ICF-LswINF-MIB::hpnicfifVLANTrunkPassListHigh,OCTET,read-only,,current,,Each octet within this value specifies a set of eight VLANs, with the first octet specifying VLANs 2049 through 2056, the second octet specifying VLANs 2057 through 2064, etc. Within each octet, the most significant bit represents the highest numbered VLAN, and the least significant bit represents the lowest numbered VLAN. Thus, each actually passed VLAN of the trunk port is represented by a single bit within the value of this object. If that bit has a value of '1' then that VLAN is actually passed in the set of VLANs; the VLAN is not actually passed if its bit has a value of '0'.
.1.3.6.1.4.1.11.2.14.11.15.8.35.5.1.3.1.6,HPN-ICF-LswINF-MIB::hpnicfifVLANTrunkAllowListLow,OCTET,read-write,,current,,Each octet within this value specifies a set of eight VLANs, with the first octet specifying VLANs 1 through 8, the second octet specifying VLANs 9 through 16, etc. Within each octet, the most significant bit represents the highest numbered VLAN, and the least significant bit represents the lowest numbered VLAN. Thus, each allowed VLAN of the trunk port is represented by a single bit within the value of this object. If that bit has a value of '1' then that VLAN is allowed in the set of VLANs; the VLAN is not allowed if its bit has a value of '0'.
.1.3.6.1.4.1.11.2.14.11.15.8.35.5.1.3.1.7,HPN-ICF-LswINF-MIB::hpnicfifVLANTrunkAllowListHigh,OCTET,read-write,,current,,Each octet within this value specifies a set of eight VLANs, with the first octet specifying VLANs 2049 through 2056, the second octet specifying VLANs 2057 through 2064, etc. Within each octet, the most significant bit represents the highest numbered VLAN, and the least significant bit represents the lowest numbered VLAN. Thus, each allowed VLAN of the trunk port is represented by a single bit within the value of this object. If that bit has a value of '1' then that VLAN is allowed in the set of VLANs; the VLAN is not allowed if its bit has a value of '0'.
.1.3.6.1.4.1.11.2.14.11.15.8.35.5.1.4,HPN-ICF-LswINF-MIB::hpnicfethernetTable,,not-accessible,,current,,Ethernet port attribute table.
.1.3.6.1.4.1.11.2.14.11.15.8.35.5.1.4.1,HPN-ICF-LswINF-MIB::hpnicfethernetEntry,,not-accessible,ifIndex,current,,Entries of Ethernet port attribute table
.1.3.6.1.4.1.11.2.14.11.15.8.35.5.1.4.1.3,HPN-ICF-LswINF-MIB::hpnicfifEthernetDuplex,INTEGER,read-write,,current,full(1):half(2):auto(3),Ethernet interface mode.
.1.3.6.1.4.1.11.2.14.11.15.8.35.5.1.4.1.4,HPN-ICF-LswINF-MIB::hpnicfifEthernetMTU,INTEGER,read-write,,current,,MTU on the Ethernet interface.
.1.3.6.1.4.1.11.2.14.11.15.8.35.5.1.4.1.5,HPN-ICF-LswINF-MIB::hpnicfifEthernetSpeed,INTEGER,read-write,,current,auto(0):s10M(10):s100M(100):s1000M(1000):s10000M(10000):s24000M(24000):s40000M(40000):s100000M(100000),Ethernet interface speed.
.1.3.6.1.4.1.11.2.14.11.15.8.35.5.1.4.1.7,HPN-ICF-LswINF-MIB::hpnicfifEthernetMdi,INTEGER,read-write,,current,mdi-ii(1):mdi-x(2):mdi-auto(3),Type of the line connected to the port. MDI-II (straight-through cable): 1 MDI-X (crossover cable): 2 MDI-AUTO (auto-sensing): 3
.1.3.6.1.4.1.11.2.14.11.15.8.35.5.1.4.1.8,HPN-ICF-LswINF-MIB::hpnicfMaxMacLearn,INTEGER,read-write,,current,,The maximum number of MAC addresses that the port can learn. The value -1 means that the number of Mac addresses that the port can learn is unlimited.
.1.3.6.1.4.1.11.2.14.11.15.8.35.5.1.4.1.9,HPN-ICF-LswINF-MIB::hpnicfifMacAddressLearn,INTEGER,read-only,,current,enabled(1):disabled(2),This object indicates if the interface is allowed to learn mac address. eanbled(1) means the interface can learn mac address, otherwise disabled(2) can be set.
.1.3.6.1.4.1.11.2.14.11.15.8.35.5.1.4.1.10,HPN-ICF-LswINF-MIB::hpnicfifEthernetTest,INTEGER,read-write,,current,test(1),Test this interface. The actual testing will be different according to products. Read operation not supported.
.1.3.6.1.4.1.11.2.14.11.15.8.35.5.1.4.1.11,HPN-ICF-LswINF-MIB::hpnicfifMacAddrLearnMode,INTEGER,read-only,,current,iVL(1):sVL(2),Status indicates mac address learn mode of the interface. IVL(1) means independent VLAN learning. SVL means shared VLAN learning.
.1.3.6.1.4.1.11.2.14.11.15.8.35.5.1.4.1.12,HPN-ICF-LswINF-MIB::hpnicfifEthernetFlowInterval,INTEGER,read-write,,current,,Set flow interval of the ethernet. The NMS should set value to integer which is a multiple of 5.
.1.3.6.1.4.1.11.2.14.11.15.8.35.5.1.4.1.13,HPN-ICF-LswINF-MIB::hpnicfifEthernetIsolate,OCTET,read-write,,current,,Isolate group means that all ports in the same isolate group can not send and receive packets each other. Each octet within this value specifies a set of eight isolate groups, with the first octet specifying isolate groups 1 through 8, the second octet specifying isolate groups 9 through 16, etc. Within each octet, the leftmost bit is the first bit. the first bit represents the lowest numbered isolate group, and the last bit represents the highest numbered isolate group. one port can belong to more than one isolate group. Thus, each isolate group is represented by a single bit within the value of this object. If that bit has a value of '1', then that isolate group includes this port; the port is not included if its bit has a value of '0'. for example, the first octet is '10000100' means that the port is included in the isolate group 1 and isolate group 6.
.1.3.6.1.4.1.11.2.14.11.15.8.35.5.1.4.1.14,HPN-ICF-LswINF-MIB::hpnicfifVlanVPNStatus,INTEGER,read-write,,current,enabled(1):disabled(2),Vlan VPN enable status.
.1.3.6.1.4.1.11.2.14.11.15.8.35.5.1.4.1.15,HPN-ICF-LswINF-MIB::hpnicfifVlanVPNUplinkStatus,INTEGER,read-write,,current,enabled(1):disabled(2),Vlan VPN uplink status.
.1.3.6.1.4.1.11.2.14.11.15.8.35.5.1.4.1.16,HPN-ICF-LswINF-MIB::hpnicfifVlanVPNTPID,Integer32,read-write,,current,,Port based Vlan VPN TPID(Tag Protocol Indentifier), default value is 0x8100. Please refer to hpnicfVlanVPNTPIDMode to get more information.
.1.3.6.1.4.1.11.2.14.11.15.8.35.5.1.4.1.17,HPN-ICF-LswINF-MIB::hpnicfifIsolateGroupID,Integer32,read-write,,current,,Isolate group identifier. Value zero means this interface does not belong to any isolate group.
.1.3.6.1.4.1.11.2.14.11.15.8.35.5.1.4.1.18,HPN-ICF-LswINF-MIB::hpnicfifisUplinkPort,INTEGER,read-only,,current,yes(1):no(2),Ethernet uplink status, default value is 2.
.1.3.6.1.4.1.11.2.14.11.15.8.35.5.1.4.1.19,HPN-ICF-LswINF-MIB::hpnicfifEthernetAutoSpeedMask,BITS,read-only,,current,s10M(0):s100M(1):s1000M(2):s10000M(3):s24000M(4):s40000M(5):s100000M(6),This object specifies which kinds of speed mode can be negotiated. Each bit corresponds to a kind of speed mode. If the value of a bit is '1', it means the corresponding speed mode is negotiable on the port. Otherwise the negotiation for that kind of speed mode is not supported on this port. If there are several negotiable speed modes, all bits for them are '1'. For example, if the speed mode 's10M' and 's1000M' can be negotiable, the value of this object is 0xA0.
.1.3.6.1.4.1.11.2.14.11.15.8.35.5.1.4.1.20,HPN-ICF-LswINF-MIB::hpnicfifEthernetAutoSpeed,BITS,read-write,,current,s10M(0):s100M(1):s1000M(2):s10000M(3):s24000M(4):s40000M(5):s100000M(6),This object indicates which kinds of speed mode are negotiable on this port. Only when a bit of hpnicfifEthernetAutoSpeedMask is '1', the corresponding bit of this object can be set to '1', indicating the corresponding speed mode is negotiable. For example, if the value of hpnicfifEthernetAutoSpeedMask is 0xA0, which indicates speed mode 's10M' and 's1000M' are negotiable, the possible value of this object should be one of the four values (0x00, 0x20, 0x80 and 0xA0). If the value of hpnicfifEthernetSpeed is not 'auto', the value of this object is insignificant and should be ignored. The value length of this object should be as long as that of hpnicfifEthernetAutoSpeedMask.
.1.3.6.1.4.1.11.2.14.11.15.8.35.5.1.5,HPN-ICF-LswINF-MIB::hpnicfIsolateGroupMax,Integer32,read-only,,current,,Max isolate group that this device support, the value is zero means that the device does not support isolate group.
.1.3.6.1.4.1.11.2.14.11.15.8.35.5.1.6,HPN-ICF-LswINF-MIB::hpnicfGlobalBroadcastMaxPps,INTEGER,read-write,,current,,The global max packets per second. When it is set, the value of BroadcastMaxPps in all ports will be changed to that setting.
.1.3.6.1.4.1.11.2.14.11.15.8.35.5.1.7,HPN-ICF-LswINF-MIB::hpnicfGlobalBroadcastMaxRatio,INTEGER,read-write,,current,,The global max-ratio of broadcast from 0 to 100 percent. When it is set, the value of BroadcastMaxRatio in all ports will be changed to that setting.
.1.3.6.1.4.1.11.2.14.11.15.8.35.5.1.8,HPN-ICF-LswINF-MIB::hpnicfBpduTunnelStatus,INTEGER,read-write,,current,enabled(1):disabled(2),Bpdu tunnel enable status.
.1.3.6.1.4.1.11.2.14.11.15.8.35.5.1.9,HPN-ICF-LswINF-MIB::hpnicfVlanVPNTPIDMode,INTEGER,read-only,,current,port-based(1):global(2),Vlan VPN TPID mode. The value 'port-based' means VLAN VPN TPID value would be set based on port via hpnicfifVlanVPNTPID. In this situation, hpnicfVlanVPNTPID is meaningless and always return 0x8100. The value 'global' means VLAN VPN TPID value should be set globally via hpnicfVlanVPNTPID. In this situation, hpnicfifVlanVPNTPID in hpnicfethernetTable has the same value with hpnicfVlanVPNTPID.
.1.3.6.1.4.1.11.2.14.11.15.8.35.5.1.10,HPN-ICF-LswINF-MIB::hpnicfVlanVPNTPID,Integer32,read-write,,current,,Global Vlan VPN TPID(Tag Protocol Indentifier), default value is 0x8100.
.1.3.6.1.4.1.11.2.14.11.15.8.35.5.1.11,HPN-ICF-LswINF-MIB::hpnicfPortIsolateGroupTable,,not-accessible,,current,,Isolate Group attribute table.
.1.3.6.1.4.1.11.2.14.11.15.8.35.5.1.11.1,HPN-ICF-LswINF-MIB::hpnicfPortIsolateGroupEntry,,not-accessible,hpnicfPortIsolateGroupIndex,current,,The entry of hpnicfPortIsolateGroupTable.
.1.3.6.1.4.1.11.2.14.11.15.8.35.5.1.11.1.1,HPN-ICF-LswINF-MIB::hpnicfPortIsolateGroupIndex,Integer32,not-accessible,,current,,Port isolate group identifier. The index of the hpnicfPortIsolateGroupTable. The value ranges from 1 to the limit of isolate group quantity.
.1.3.6.1.4.1.11.2.14.11.15.8.35.5.1.11.1.2,HPN-ICF-LswINF-MIB::hpnicfPortIsolateUplinkIfIndex,Integer32,read-create,,current,,Index number of the uplink interface.
.1.3.6.1.4.1.11.2.14.11.15.8.35.5.1.11.1.3,HPN-ICF-LswINF-MIB::hpnicfPortIsolateGroupRowStatus,INTEGER,read-create,,current,active(1):notInService(2):notReady(3):createAndGo(4):createAndWait(5):destroy(6),Current operation status of the row.
.1.3.6.1.4.1.11.2.14.11.15.8.35.5.1.11.1.4,HPN-ICF-LswINF-MIB::hpnicfPortIsolateGroupDescription,OCTET,read-create,,current,,Port isolate group description, default value is zero-length string.
.1.3.6.1.4.1.11.2.14.11.15.8.35.5.1.12,HPN-ICF-LswINF-MIB::hpnicfMaxMacLearnRange,Integer32,read-only,,current,,The maximum number of MAC address that the port supports.
.1.3.6.1.4.1.11.2.14.11.15.8.35.5.1.13,HPN-ICF-LswINF-MIB::hpnicfifPortProtocolStatTable,,not-accessible,,current,,This table contains objects of port statistics information based on IPv4 and IPv6 protocols.
.1.3.6.1.4.1.11.2.14.11.15.8.35.5.1.13.1,HPN-ICF-LswINF-MIB::hpnicfifPortProtocolStatEntry,,not-accessible,ifIndex,current,,The entry of hpnicfifPortProtocolStatTable.
.1.3.6.1.4.1.11.2.14.11.15.8.35.5.1.13.1.1,HPN-ICF-LswINF-MIB::hpnicfifIPv4InOctets,Counter64,read-only,,current,,Number of octets based on IPv4 received on the interface.
.1.3.6.1.4.1.11.2.14.11.15.8.35.5.1.13.1.2,HPN-ICF-LswINF-MIB::hpnicfifIPv4InUcastPkts,Counter64,read-only,,current,,Number of unicast packets based on IPv4 received on the interface.
.1.3.6.1.4.1.11.2.14.11.15.8.35.5.1.13.1.3,HPN-ICF-LswINF-MIB::hpnicfifIPv4InMultiPkts,Counter64,read-only,,current,,Number of multicast packets based on IPv4 received on the interface.
.1.3.6.1.4.1.11.2.14.11.15.8.35.5.1.13.1.4,HPN-ICF-LswINF-MIB::hpnicfifIPv4InBroadcastPkts,Counter64,read-only,,current,,Number of broadcast packets based on IPv4 received on the interface.
.1.3.6.1.4.1.11.2.14.11.15.8.35.5.1.13.1.5,HPN-ICF-LswINF-MIB::hpnicfifIPv4InDiscards,Counter64,read-only,,current,,Number of discard packets based on IPv4 received on the interface.
.1.3.6.1.4.1.11.2.14.11.15.8.35.5.1.13.1.6,HPN-ICF-LswINF-MIB::hpnicfifIPv4InErrors,Counter64,read-only,,current,,Number of error packets based on IPv4 received on the interface.
.1.3.6.1.4.1.11.2.14.11.15.8.35.5.1.13.1.7,HPN-ICF-LswINF-MIB::hpnicfifIPv4OutOctets,Counter64,read-only,,current,,Number of octets based on IPv4 transmitted out of the interface.
.1.3.6.1.4.1.11.2.14.11.15.8.35.5.1.13.1.8,HPN-ICF-LswINF-MIB::hpnicfifIPv4OutUcastPkts,Counter64,read-only,,current,,Number of unicast packets based on IPv4 transmitted out of the interface.
.1.3.6.1.4.1.11.2.14.11.15.8.35.5.1.13.1.9,HPN-ICF-LswINF-MIB::hpnicfifIPv4OutMultiPkts,Counter64,read-only,,current,,Number of multicast packets based on IPv4 transmitted out of the interface.
.1.3.6.1.4.1.11.2.14.11.15.8.35.5.1.13.1.10,HPN-ICF-LswINF-MIB::hpnicfifIPv4OutBroadcastPkts,Counter64,read-only,,current,,Number of broadcast packets based on IPv4 transmitted out of the interface.
.1.3.6.1.4.1.11.2.14.11.15.8.35.5.1.13.1.11,HPN-ICF-LswINF-MIB::hpnicfifIPv4OutDiscards,Counter64,read-only,,current,,Number of discard packets based on IPv4 transmitted out of the interface.
.1.3.6.1.4.1.11.2.14.11.15.8.35.5.1.13.1.12,HPN-ICF-LswINF-MIB::hpnicfifIPv4OutErrors,Counter64,read-only,,current,,Number of error packets based on IPv4 transmitted out of the interface.
.1.3.6.1.4.1.11.2.14.11.15.8.35.5.1.13.1.13,HPN-ICF-LswINF-MIB::hpnicfifIPv6InOctets,Counter64,read-only,,current,,Number of octets based on IPv6 received on the interface.
.1.3.6.1.4.1.11.2.14.11.15.8.35.5.1.13.1.14,HPN-ICF-LswINF-MIB::hpnicfifIPv6InUcastPkts,Counter64,read-only,,current,,Number of unicast packets based on IPv6 received on the interface.
.1.3.6.1.4.1.11.2.14.11.15.8.35.5.1.13.1.15,HPN-ICF-LswINF-MIB::hpnicfifIPv6InMultiPkts,Counter64,read-only,,current,,Number of multicast packets based on IPv6 received on the interface.
.1.3.6.1.4.1.11.2.14.11.15.8.35.5.1.13.1.16,HPN-ICF-LswINF-MIB::hpnicfifIPv6InAnycastPkts,Counter64,read-only,,current,,Number of anycast packets based on IPv6 received on the interface.
.1.3.6.1.4.1.11.2.14.11.15.8.35.5.1.13.1.17,HPN-ICF-LswINF-MIB::hpnicfifIPv6InDiscards,Counter64,read-only,,current,,Number of discard packets based on IPv6 received on the interface.
.1.3.6.1.4.1.11.2.14.11.15.8.35.5.1.13.1.18,HPN-ICF-LswINF-MIB::hpnicfifIPv6InErrors,Counter64,read-only,,current,,Number of error packets based on IPv6 received on the interface.
.1.3.6.1.4.1.11.2.14.11.15.8.35.5.1.13.1.19,HPN-ICF-LswINF-MIB::hpnicfifIPv6OutOctets,Counter64,read-only,,current,,Number of octets based on IPv6 transmitted of the interface.
.1.3.6.1.4.1.11.2.14.11.15.8.35.5.1.13.1.20,HPN-ICF-LswINF-MIB::hpnicfifIPv6OutUcastPkts,Counter64,read-only,,current,,Number of unicast packets based on IPv6 transmitted out of the interface.
.1.3.6.1.4.1.11.2.14.11.15.8.35.5.1.13.1.21,HPN-ICF-LswINF-MIB::hpnicfifIPv6OutMultiPkts,Counter64,read-only,,current,,Number of multicast packets based on IPv6 transmitted out of the interface.
.1.3.6.1.4.1.11.2.14.11.15.8.35.5.1.13.1.22,HPN-ICF-LswINF-MIB::hpnicfifIPv6OutAnycastPkts,Counter64,read-only,,current,,Number of anycast packets based on IPv6 transmitted out of the interface.
.1.3.6.1.4.1.11.2.14.11.15.8.35.5.1.13.1.23,HPN-ICF-LswINF-MIB::hpnicfifIPv6OutDiscards,Counter64,read-only,,current,,Number of discard packets based on IPv6 transmitted out of the interface.
.1.3.6.1.4.1.11.2.14.11.15.8.35.5.1.13.1.24,HPN-ICF-LswINF-MIB::hpnicfifIPv6OutErrors,Counter64,read-only,,current,,Number of error packets based on IPv6 transmitted out of the interface.
.1.3.6.1.4.1.11.2.14.11.15.8.35.6,HPN-ICF-OID-MIB::hpnicfLswRstpMib,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.8.35.6.1,HPN-ICF-LswRSTP-MIB::hpnicfLswRstpMibObject,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.8.35.6.1.0,HPN-ICF-LswRSTP-MIB::hpnicfRstpEventsV2,,,,,,Definition point for RSTP notifications.
.1.3.6.1.4.1.11.2.14.11.15.8.35.6.1.0.1,HPN-ICF-LswRSTP-MIB::hpnicfRstpBpduGuarded,,,,,,The SNMP trap that is generated when an edged port of the BPDU-guard switch recevies BPDU packets.
.1.3.6.1.4.1.11.2.14.11.15.8.35.6.1.0.2,HPN-ICF-LswRSTP-MIB::hpnicfRstpRootGuarded,,,,,,The SNMP trap that is generated when a root-guard port receives a superior bpdu.
.1.3.6.1.4.1.11.2.14.11.15.8.35.6.1.0.3,HPN-ICF-LswRSTP-MIB::hpnicfRstpBridgeLostRootPrimary,,,,,,The SNMP trap that is generated when the bridge is no longer the root bridge of the spanning tree. Another switch with higher priority has already been the root bridge. 
.1.3.6.1.4.1.11.2.14.11.15.8.35.6.1.0.4,HPN-ICF-LswRSTP-MIB::hpnicfRstpLoopGuarded,,,,,,The SNMP trap that is generated when a loop-guard port is aged out .
.1.3.6.1.4.1.11.2.14.11.15.8.35.6.1.1,HPN-ICF-LswRSTP-MIB::hpnicfdot1dStpStatus,INTEGER,read-write,,current,enabled(1):disabled(2), Bridge STP enabled/disabled state
.1.3.6.1.4.1.11.2.14.11.15.8.35.6.1.2,HPN-ICF-LswRSTP-MIB::hpnicfdot1dStpForceVersion,INTEGER,read-write,,current,stp(0):rstp(2), Running mode of the bridge RSTP state machine
.1.3.6.1.4.1.11.2.14.11.15.8.35.6.1.3,HPN-ICF-LswRSTP-MIB::hpnicfdot1dStpDiameter,INTEGER,read-write,,current,, Permitted amount of bridges between any two ends on the network.
.1.3.6.1.4.1.11.2.14.11.15.8.35.6.1.4,HPN-ICF-LswRSTP-MIB::hpnicfdot1dStpRootBridgeAddress,OCTET,read-only,,current,, MAC address of the root bridge
.1.3.6.1.4.1.11.2.14.11.15.8.35.6.1.5,HPN-ICF-LswRSTP-MIB::hpnicfdot1dStpPortXTable,,not-accessible,,current,,RSTP extended information of the port 
.1.3.6.1.4.1.11.2.14.11.15.8.35.6.1.5.1,HPN-ICF-LswRSTP-MIB::hpnicfdot1dStpPortXEntry,,not-accessible,,current,, RSTP extended information of the port 
.1.3.6.1.4.1.11.2.14.11.15.8.35.6.1.5.1.1,HPN-ICF-LswRSTP-MIB::hpnicfdot1dStpPortStatus,INTEGER,read-write,,current,enabled(1):disabled(2), RSTP status of the port
.1.3.6.1.4.1.11.2.14.11.15.8.35.6.1.5.1.2,HPN-ICF-LswRSTP-MIB::hpnicfdot1dStpPortEdgeport,INTEGER,read-write,,current,true(1):false(2), Whether the port can be an edge port
.1.3.6.1.4.1.11.2.14.11.15.8.35.6.1.5.1.3,HPN-ICF-LswRSTP-MIB::hpnicfdot1dStpPortPointToPoint,INTEGER,read-write,,current,forceTrue(1):forceFalse(2):auto(3), It is the administrative value indicates whether the port can be connected to a point-to-point link or not. If the value is 'auto', the operative value of a point-to-point link state is determined by device itself, and can be read from hpnicfdot1dStpOperPortPointToPoint.
.1.3.6.1.4.1.11.2.14.11.15.8.35.6.1.5.1.4,HPN-ICF-LswRSTP-MIB::hpnicfdot1dStpMcheck,INTEGER,read-write,,current,true(1):false(2), Check if the port transfer state machine enters
.1.3.6.1.4.1.11.2.14.11.15.8.35.6.1.5.1.5,HPN-ICF-LswRSTP-MIB::hpnicfdot1dStpTransLimit,INTEGER,read-write,,current,, Packet transmission limit of the bridge in a duration of Hello Time.
.1.3.6.1.4.1.11.2.14.11.15.8.35.6.1.5.1.6,HPN-ICF-LswRSTP-MIB::hpnicfdot1dStpRXStpBPDU,Counter32,read-only,,current,, Number of STP BPDU received 
.1.3.6.1.4.1.11.2.14.11.15.8.35.6.1.5.1.7,HPN-ICF-LswRSTP-MIB::hpnicfdot1dStpTXStpBPDU,Counter32,read-only,,current,, Number of STP BPDU transmitted 
.1.3.6.1.4.1.11.2.14.11.15.8.35.6.1.5.1.8,HPN-ICF-LswRSTP-MIB::hpnicfdot1dStpRXTCNBPDU,Counter32,read-only,,current,, Number of TCN BPDU received 
.1.3.6.1.4.1.11.2.14.11.15.8.35.6.1.5.1.9,HPN-ICF-LswRSTP-MIB::hpnicfdot1dStpTXTCNBPDU,Counter32,read-only,,current,, Number of TCN BPDU transmitted 
.1.3.6.1.4.1.11.2.14.11.15.8.35.6.1.5.1.10,HPN-ICF-LswRSTP-MIB::hpnicfdot1dStpRXRSTPBPDU,Counter32,read-only,,current,,Number of RSTP BPDU received
.1.3.6.1.4.1.11.2.14.11.15.8.35.6.1.5.1.11,HPN-ICF-LswRSTP-MIB::hpnicfdot1dStpTXRSTPBPDU,Counter32,read-only,,current,, Number of RSTP BPDU transmitted 
.1.3.6.1.4.1.11.2.14.11.15.8.35.6.1.5.1.12,HPN-ICF-LswRSTP-MIB::hpnicfdot1dStpClearStatistics,INTEGER,read-write,,current,clear(1),Clear RSTP statistics. Read operation not supported. 
.1.3.6.1.4.1.11.2.14.11.15.8.35.6.1.5.1.13,HPN-ICF-LswRSTP-MIB::hpnicfdot1dSetStpDefaultPortCost,INTEGER,read-write,,current,enable(1),Set PathCost back to the default setting. Read operation not supported.
.1.3.6.1.4.1.11.2.14.11.15.8.35.6.1.5.1.14,HPN-ICF-LswRSTP-MIB::hpnicfdot1dStpRootGuard,INTEGER,read-write,,current,enabled(1):disabled(2), If the port guard root bridge. Other bridge which want to be root can not become root through this port if enabled. 
.1.3.6.1.4.1.11.2.14.11.15.8.35.6.1.5.1.15,HPN-ICF-LswRSTP-MIB::hpnicfdot1dStpLoopGuard,INTEGER,read-write,,current,enabled(1):disabled(2), Loop guard function that keep a root port or an alternate port in discarding state while the information on the port is aged out.
.1.3.6.1.4.1.11.2.14.11.15.8.35.6.1.5.1.16,HPN-ICF-LswRSTP-MIB::hpnicfdot1dStpPortBlockedReason,INTEGER,read-only,,current,notBlock(1):blockForProtocol(2):blockForRootGuard(3):blockForBPDUGuard(4):blockForLoopGuard(5), Record the block reason of the port. notBlock (1) means that the port is not in block state,. blockForProtocol (2) means that the port is blocked by stp protocol to avoid loop. blockForRootGuard(3) means that the root guard flag of bridge is set and a better message received from the port,and the port is blocked. blockForBPDUGuard(4) means that the port has been configured as an edge port and receive a BPDU and thus blocked. blockForLoopGuard(5) means that the port is blocked for loopguarded. 
.1.3.6.1.4.1.11.2.14.11.15.8.35.6.1.5.1.17,HPN-ICF-LswRSTP-MIB::hpnicfdot1dStpRXTCBPDU,Counter32,read-only,,current,, The number of received TC BPDUs 
.1.3.6.1.4.1.11.2.14.11.15.8.35.6.1.5.1.18,HPN-ICF-LswRSTP-MIB::hpnicfdot1dStpPortSendingBPDUType,INTEGER,read-only,,current,stp(0):rstp(2), Type of BPDU which the port is sending. 
.1.3.6.1.4.1.11.2.14.11.15.8.35.6.1.5.1.19,HPN-ICF-LswRSTP-MIB::hpnicfdot1dStpOperPortPointToPoint,INTEGER,read-only,,current,true(1):false(2), This object indicates whether the port has connected to a point-to-point link or not. The administrative value should be read from hpnicfdot1dStpPortPointToPoint. 
.1.3.6.1.4.1.11.2.14.11.15.8.35.6.1.6,HPN-ICF-LswRSTP-MIB::hpnicfDot1dStpBpduGuard,INTEGER,read-write,,current,enabled(1):disabled(2), If BPDU guard enabled. The edge port will discard illegal BPDU when enabled
.1.3.6.1.4.1.11.2.14.11.15.8.35.6.1.7,HPN-ICF-LswRSTP-MIB::hpnicfDot1dStpRootType,INTEGER,read-write,,current,normal(1):primary(2):secondary(3), Root type of the bridge
.1.3.6.1.4.1.11.2.14.11.15.8.35.6.1.8,HPN-ICF-LswRSTP-MIB::hpnicfDot1dTimeOutFactor,INTEGER,read-write,,current,, Time Out Factor of the bridge.
.1.3.6.1.4.1.11.2.14.11.15.8.35.6.1.9,HPN-ICF-LswRSTP-MIB::hpnicfDot1dStpPathCostStandard,INTEGER,read-write,,current,dot1d-1998(1):dot1t(2):legacy(3), Path Cost Standard of the bridge. Value 'dot1d-1998' is IEEE 802.1d standard in 1998, value 'dot1t' is IEEE 802.1t standard, and value 'legacy' is a private legacy standard.
.1.3.6.1.4.1.11.2.14.11.15.8.35.6.1.10,HPN-ICF-LswRSTP-MIB::hpnicfdot1dStpIgnoredVlanTable,,not-accessible,,current,,RSTP extended information of vlan 
.1.3.6.1.4.1.11.2.14.11.15.8.35.6.1.10.1,HPN-ICF-LswRSTP-MIB::hpnicfdot1dStpIgnoredVlanEntry,,not-accessible,hpnicfdot1dVlan,current,, RSTP extended information of the vlan 
.1.3.6.1.4.1.11.2.14.11.15.8.35.6.1.10.1.1,HPN-ICF-LswRSTP-MIB::hpnicfdot1dVlan,INTEGER,read-only,,current,, Vlan id supported
.1.3.6.1.4.1.11.2.14.11.15.8.35.6.1.10.1.2,HPN-ICF-LswRSTP-MIB::hpnicfdot1dStpIgnore,INTEGER,read-write,,current,enable(1):disable(2), Whether the vlan is stp Ignored
.1.3.6.1.4.1.11.2.14.11.15.8.35.7,HPN-ICF-OID-MIB::hpnicfLswIgmpsnoopingMib,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.8.35.7.1,HPN-ICF-LswIGSP-MIB::hpnicfLswIgmpsnoopingMibObject,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.8.35.7.1.1,HPN-ICF-LswIGSP-MIB::hpnicfIgmpSnoopingStatus,INTEGER,read-write,,current,enabled(1):disabled(2),Configure to enable IGMP Snooping.
.1.3.6.1.4.1.11.2.14.11.15.8.35.7.1.2,HPN-ICF-LswIGSP-MIB::hpnicfIgmpSnoopingRouterPortAge,INTEGER,read-write,,current,,Configure the aging time of the router port.
.1.3.6.1.4.1.11.2.14.11.15.8.35.7.1.3,HPN-ICF-LswIGSP-MIB::hpnicfIgmpSnoopingResponseTime,INTEGER,read-write,,current,,Configure the maximum query response time.
.1.3.6.1.4.1.11.2.14.11.15.8.35.7.1.4,HPN-ICF-LswIGSP-MIB::hpnicfIgmpSnoopingHostTime,INTEGER,read-write,,current,,Configure the aging time of the multicast group port.
.1.3.6.1.4.1.11.2.14.11.15.8.35.7.1.5,HPN-ICF-LswIGSP-MIB::hpnicfIgmpSnoopingGroupLimitTable,,not-accessible,,current,,The table lists the maximum group number that one interface could do IGMP Snooping.
.1.3.6.1.4.1.11.2.14.11.15.8.35.7.1.5.1,HPN-ICF-LswIGSP-MIB::hpnicfIgmpSnoopingGroupLimitEntry,,not-accessible,hpnicfIgmpSnoopingGroupIfIndex,current,,An entry (conceptual row) representing the maximum group number on an interface which IGMP Snooping operation is enabled.
.1.3.6.1.4.1.11.2.14.11.15.8.35.7.1.5.1.1,HPN-ICF-LswIGSP-MIB::hpnicfIgmpSnoopingGroupIfIndex,Integer32,not-accessible,,current,,The ifIndex value of the port on which IGMP snooping is enabled.
.1.3.6.1.4.1.11.2.14.11.15.8.35.7.1.5.1.2,HPN-ICF-LswIGSP-MIB::hpnicfIgmpSnoopingGroupLimitNumber,Unsigned32,read-write,,current,,The maxmum group number of IGMP Snooping on a port.
.1.3.6.1.4.1.11.2.14.11.15.8.35.7.1.6,HPN-ICF-LswIGSP-MIB::hpnicfIgmpSnoopingFastLeaveTable,,not-accessible,,current,,The table specifies the fast leave status on those ports that do IGMP Snooping.
.1.3.6.1.4.1.11.2.14.11.15.8.35.7.1.6.1,HPN-ICF-LswIGSP-MIB::hpnicfIgmpSnoopingFastLeaveEntry,,not-accessible,hpnicfIgmpSnoopingFastLeaveIfIndex,current,,An entry specifies the fast leave status on those ports that do IGMP Snooping.
.1.3.6.1.4.1.11.2.14.11.15.8.35.7.1.6.1.1,HPN-ICF-LswIGSP-MIB::hpnicfIgmpSnoopingFastLeaveIfIndex,Integer32,not-accessible,,current,,The ifIndex value of the port on which IGMP snooping is enabled.
.1.3.6.1.4.1.11.2.14.11.15.8.35.7.1.6.1.2,HPN-ICF-LswIGSP-MIB::hpnicfIgmpSnoopingFastLeaveStatus,INTEGER,read-write,,current,enabled(1):disabled(2),The fast leave status of the port on which IGMP Snooping is enabled.
.1.3.6.1.4.1.11.2.14.11.15.8.35.7.1.7,HPN-ICF-LswIGSP-MIB::hpnicfIgmpSnoopingGroupPolicyTable,,not-accessible,,current,,This is a table specifies the group policy parameter and Vlan ID of the IGMP Snooping port.
.1.3.6.1.4.1.11.2.14.11.15.8.35.7.1.7.1,HPN-ICF-LswIGSP-MIB::hpnicfIgmpSnoopingGroupPolicyEntry,,not-accessible,hpnicfIgmpSnoopingGroupPolicyIfIndex:hpnicfIgmpSnoopingGroupPolicyVlanID,current,,An entry representing the group policy parameter and Vlan ID of a port on which IGMP Snooping operation is enabled.
.1.3.6.1.4.1.11.2.14.11.15.8.35.7.1.7.1.1,HPN-ICF-LswIGSP-MIB::hpnicfIgmpSnoopingGroupPolicyIfIndex,Integer32,not-accessible,,current,,The ifIndex value of the port on which IGMP Snooping is enabled.
.1.3.6.1.4.1.11.2.14.11.15.8.35.7.1.7.1.2,HPN-ICF-LswIGSP-MIB::hpnicfIgmpSnoopingGroupPolicyVlanID,Integer32,not-accessible,,current,,The Vlan ID which the IGMP Snooping port is attached to.
.1.3.6.1.4.1.11.2.14.11.15.8.35.7.1.7.1.3,HPN-ICF-LswIGSP-MIB::hpnicfIgmpSnoopingGroupPolicyParameter,Integer32,read-create,,current,,The ACL Number which is used as the group policy parameter of the IGMP Snooping port.
.1.3.6.1.4.1.11.2.14.11.15.8.35.7.1.7.1.4,HPN-ICF-LswIGSP-MIB::hpnicfIgmpSnoopingGroupPolicyStatus,INTEGER,read-create,,current,active(1):notInService(2):notReady(3):createAndGo(4):createAndWait(5):destroy(6),This object is used to create or delete a row and represent the current status of this row. Now support three state:CreateAndGo,Active,Destroy.
.1.3.6.1.4.1.11.2.14.11.15.8.35.7.1.8,HPN-ICF-LswIGSP-MIB::hpnicfIgmpSnoopingNonFloodingStatus,INTEGER,read-write,,current,enabled(1):disabled(2),Configure to disable multicast flooding when no member exists in the destinated group. To use this function,IGMP snooping must be enabled.
.1.3.6.1.4.1.11.2.14.11.15.8.35.7.1.9,HPN-ICF-LswIGSP-MIB::hpnicfIgmpSnoopingVlanStatusTable,,not-accessible,,current,,The table used to enable or disable IGMP snooping  on the specified VLAN.
.1.3.6.1.4.1.11.2.14.11.15.8.35.7.1.9.1,HPN-ICF-LswIGSP-MIB::hpnicfIgmpSnoopingVlanStatusEntry,,not-accessible,hpnicfIgmpSnoopingVlanID,current,,An entry representing the IGMP snooping status on  the specified VLAN.
.1.3.6.1.4.1.11.2.14.11.15.8.35.7.1.9.1.1,HPN-ICF-LswIGSP-MIB::hpnicfIgmpSnoopingVlanID,Integer32,not-accessible,,current,,An index uniquely identifies on which VLAN IGMP  snooping is enabled or disabled. 
.1.3.6.1.4.1.11.2.14.11.15.8.35.7.1.9.1.2,HPN-ICF-LswIGSP-MIB::hpnicfIgmpSnoopingVlanEnabled,INTEGER,read-write,,current,enabled(1):disabled(2),Indicating whether IGMP snooping is enabled on this VLAN.
.1.3.6.1.4.1.11.2.14.11.15.8.35.7.1.10,HPN-ICF-LswIGSP-MIB::hpnicfIgmpSnoopingStatsObjects,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.8.35.7.1.10.1,HPN-ICF-LswIGSP-MIB::hpnicfRecvIGMPGQueryNum,Counter32,read-only,,current,,The statistics of IGMP general query packets received on the device.
.1.3.6.1.4.1.11.2.14.11.15.8.35.7.1.10.2,HPN-ICF-LswIGSP-MIB::hpnicfRecvIGMPSQueryNum,Counter32,read-only,,current,,The statistics of IGMP specific query packets received on the device.
.1.3.6.1.4.1.11.2.14.11.15.8.35.7.1.10.3,HPN-ICF-LswIGSP-MIB::hpnicfRecvIGMPV1ReportNum,Counter32,read-only,,current,,The statistics of IGMP V1 report packets received on the device.
.1.3.6.1.4.1.11.2.14.11.15.8.35.7.1.10.4,HPN-ICF-LswIGSP-MIB::hpnicfRecvIGMPV2ReportNum,Counter32,read-only,,current,,The statistics of IGMP V2 report packets received on the device.
.1.3.6.1.4.1.11.2.14.11.15.8.35.7.1.10.5,HPN-ICF-LswIGSP-MIB::hpnicfRecvIGMPLeaveNum,Counter32,read-only,,current,,The statistics of IGMP leave packets received on the device.
.1.3.6.1.4.1.11.2.14.11.15.8.35.7.1.10.6,HPN-ICF-LswIGSP-MIB::hpnicfRecvErrorIGMPPacketNum,Counter32,read-only,,current,,The statistics of error IGMP packets received on the device.
.1.3.6.1.4.1.11.2.14.11.15.8.35.7.1.10.7,HPN-ICF-LswIGSP-MIB::hpnicfSentIGMPSQueryNum,Counter32,read-only,,current,,The statistics of IGMP specific query packets sent from the device.
.1.3.6.1.4.1.11.2.14.11.15.8.35.7.1.10.8,HPN-ICF-LswIGSP-MIB::hpnicfIgmpSnoopingClearStats,INTEGER,read-write,,current,clear(1):counting(2),The configuration to clear the statistics of IGMP packets.
.1.3.6.1.4.1.11.2.14.11.15.8.35.8,HPN-ICF-OID-MIB::hpnicfLswDhcpMib,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.8.35.8.1,HPN-ICF-LswDHCP-MIB::hpnicfLswDhcpMibObject,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.8.35.8.1.1,HPN-ICF-LswDHCP-MIB::hpnicfDhcpGroupTable,,not-accessible,,current,,A table containing the information of dhcp group 
.1.3.6.1.4.1.11.2.14.11.15.8.35.8.1.1.1,HPN-ICF-LswDHCP-MIB::hpnicfDhcpGroupEntry,,not-accessible,hpnicfDhcpGroupID,current,,A table entry containing the information of dhcp group 
.1.3.6.1.4.1.11.2.14.11.15.8.35.8.1.1.1.1,HPN-ICF-LswDHCP-MIB::hpnicfDhcpGroupID,INTEGER,read-create,,current,, DHCP group identifier 
.1.3.6.1.4.1.11.2.14.11.15.8.35.8.1.1.1.2,HPN-ICF-LswDHCP-MIB::hpnicfIpDhcpServerAddress1,IpAddress,read-write,,current,, The first IP address of DHCP server group 
.1.3.6.1.4.1.11.2.14.11.15.8.35.8.1.1.1.3,HPN-ICF-LswDHCP-MIB::hpnicfIpDhcpServerAddress2,IpAddress,read-write,,current,, The second IP address of DHCP server group 
.1.3.6.1.4.1.11.2.14.11.15.8.35.8.1.1.1.4,HPN-ICF-LswDHCP-MIB::hpnicfDhcpRowStatus,INTEGER,read-create,,current,active(1):notInService(2):notReady(3):createAndGo(4):createAndWait(5):destroy(6), Operation status of this table entry 
.1.3.6.1.4.1.11.2.14.11.15.8.35.8.1.2,HPN-ICF-LswDHCP-MIB::hpnicfDhcpSecurityTable,,not-accessible,,current,,A table containing the information of dhcp security 
.1.3.6.1.4.1.11.2.14.11.15.8.35.8.1.2.1,HPN-ICF-LswDHCP-MIB::hpnicfDhcpSecurityEntry,,not-accessible,hpnicfDhcpClientIpAddress,current,,A table containing the information of dhcp security 
.1.3.6.1.4.1.11.2.14.11.15.8.35.8.1.2.1.1,HPN-ICF-LswDHCP-MIB::hpnicfDhcpClientIpAddress,IpAddress,read-only,,current,, DHCP client's net ip address 
.1.3.6.1.4.1.11.2.14.11.15.8.35.8.1.2.1.2,HPN-ICF-LswDHCP-MIB::hpnicfDhcpClientMacAddress,OCTET,read-write,,current,, DHCP client's mac address 
.1.3.6.1.4.1.11.2.14.11.15.8.35.8.1.2.1.3,HPN-ICF-LswDHCP-MIB::hpnicfDhcpClientProperty,INTEGER,read-write,,current,static(1):dynamic(2), Property of client address 
.1.3.6.1.4.1.11.2.14.11.15.8.35.8.1.2.1.4,HPN-ICF-LswDHCP-MIB::hpnicfDhcpClientRowStatus,INTEGER,read-create,,current,active(1):notInService(2):notReady(3):createAndGo(4):createAndWait(5):destroy(6), status of this table's entry. 
.1.3.6.1.4.1.11.2.14.11.15.8.35.8.1.3,HPN-ICF-LswDHCP-MIB::hpnicfDhcpToL3IfTable,,not-accessible,,current,,A table configuring dhcp for layer 3 interface
.1.3.6.1.4.1.11.2.14.11.15.8.35.8.1.3.1,HPN-ICF-LswDHCP-MIB::hpnicfDhcpToL3IfEntry,,not-accessible,hpnicfDhcpToL3VlanIfIndex,current,,A table configuring dhcp for layer 3 interface 
.1.3.6.1.4.1.11.2.14.11.15.8.35.8.1.3.1.1,HPN-ICF-LswDHCP-MIB::hpnicfDhcpToL3VlanIfIndex,INTEGER,read-only,,current,, vlan virtual interface index 
.1.3.6.1.4.1.11.2.14.11.15.8.35.8.1.3.1.2,HPN-ICF-LswDHCP-MIB::hpnicfDhcpToL3GroupId,INTEGER,read-write,,current,, DHCP group id for this vlan virtual interface
.1.3.6.1.4.1.11.2.14.11.15.8.35.8.1.3.1.3,HPN-ICF-LswDHCP-MIB::hpnicfDhcpToL3AddressCheck,INTEGER,read-write,,current,enabled(1):disabled(2), If dhcp security check enabled for this vlan virtual interface 
.1.3.6.1.4.1.11.2.14.11.15.8.35.8.1.3.1.4,HPN-ICF-LswDHCP-MIB::hpnicfDhcpToL3RowStatus,INTEGER,read-create,,current,active(1):notInService(2):notReady(3):createAndGo(4):createAndWait(5):destroy(6), status of this table's entry. 
.1.3.6.1.4.1.11.2.14.11.15.8.35.9,HPN-ICF-OID-MIB::hpnicfLswdevMMib,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.8.35.9.1,HPN-ICF-LswDEVM-MIB::hpnicfLswdevMMibObject,,,,,,Description.
.1.3.6.1.4.1.11.2.14.11.15.8.35.9.1.1,HPN-ICF-LswDEVM-MIB::hpnicfdevMFanStatusTable,,not-accessible,,current,, Fan status description table 
.1.3.6.1.4.1.11.2.14.11.15.8.35.9.1.1.1,HPN-ICF-LswDEVM-MIB::hpnicfdevMFanStatusEntry,,not-accessible,hpnicfDevMFanNum,current,, Fan status description table entry 
.1.3.6.1.4.1.11.2.14.11.15.8.35.9.1.1.1.1,HPN-ICF-LswDEVM-MIB::hpnicfDevMFanNum,INTEGER,read-only,,current,, Fan number 
.1.3.6.1.4.1.11.2.14.11.15.8.35.9.1.1.1.2,HPN-ICF-LswDEVM-MIB::hpnicfDevMFanStatus,INTEGER,read-only,,current,active(1):deactive(2):not-install(3):unsupport(4), Fan status: active (1), deactive (2) not installed (3) and unsupported (4)
.1.3.6.1.4.1.11.2.14.11.15.8.35.9.1.2,HPN-ICF-LswDEVM-MIB::hpnicfdevMPowerStatusTable,,not-accessible,,current,, Power status description table 
.1.3.6.1.4.1.11.2.14.11.15.8.35.9.1.2.1,HPN-ICF-LswDEVM-MIB::hpnicfdevMPowerStatusEntry,,not-accessible,hpnicfDevMPowerNum,current,, Power status description table entry 
.1.3.6.1.4.1.11.2.14.11.15.8.35.9.1.2.1.1,HPN-ICF-LswDEVM-MIB::hpnicfDevMPowerNum,INTEGER,read-only,,current,,Power number 
.1.3.6.1.4.1.11.2.14.11.15.8.35.9.1.2.1.2,HPN-ICF-LswDEVM-MIB::hpnicfDevMPowerStatus,INTEGER,read-only,,current,active(1):deactive(2):not-install(3):unsupport(4), Power status: active (1), deactive (2) not installed (3) and unsupported 
.1.3.6.1.4.1.11.2.14.11.15.8.35.9.1.3,HPN-ICF-LswDEVM-MIB::hpnicfdevMSlotEnvironmentTable,,not-accessible,,current,, environment description table 
.1.3.6.1.4.1.11.2.14.11.15.8.35.9.1.3.1,HPN-ICF-LswDEVM-MIB::hpnicfdevMSlotEnvironmentEntry,,not-accessible,hpnicfLswFrameIndex:hpnicfLswSlotIndex:hpnicfdevMSlotEnvironmentType,current,, environment description table entry 
.1.3.6.1.4.1.11.2.14.11.15.8.35.9.1.3.1.1,HPN-ICF-LswDEVM-MIB::hpnicfdevMSlotEnvironmentType,INTEGER,not-accessible,,current,temperature(1):humidity(2):fog(3),Environment type 
.1.3.6.1.4.1.11.2.14.11.15.8.35.9.1.3.1.2,HPN-ICF-LswDEVM-MIB::hpnicfDevMSlotEnvironmentStatus,INTEGER,read-only,,current,normal(1):upper(2):lower(3), Environment status
.1.3.6.1.4.1.11.2.14.11.15.8.35.9.1.3.1.3,HPN-ICF-LswDEVM-MIB::hpnicfDevMSlotEnvironmentValue,INTEGER,read-only,,current,, Environment value
.1.3.6.1.4.1.11.2.14.11.15.8.35.9.1.3.1.4,HPN-ICF-LswDEVM-MIB::hpnicfDevMSlotEnvironmentUpperLimit,INTEGER,read-write,,current,,Environment upper limit 
.1.3.6.1.4.1.11.2.14.11.15.8.35.9.1.3.1.5,HPN-ICF-LswDEVM-MIB::hpnicfDevMSlotEnvironmentLowerLimit,INTEGER,read-write,,current,, Environment Lower limit
.1.3.6.1.4.1.11.2.14.11.15.8.35.9.1.9,HPN-ICF-LswDEVM-MIB::hpnicfLinkUpDownTrapEnable,INTEGER,read-write,,current,enableBoth(1):disableBoth(2):enableLinkUpTrapOnly(3):enableLinkDownTrapOnly(4),Enable/Disable linkUp/linkDown traps of the device, determining whether to enable linkUp/linkDown traps with that of the interface. When the value is enableBoth(1), the linkUp/linkDown traps are both enabled. When the value is disableBoth(2), the linkUp/linkDown traps are both disabled. When the value is enableLinkUpTrapOnly(3), the linkUp traps is enabled and the linkDown traps is disabled. When the value is enableLinkDownTrapOnly(4), the linkUp traps is disabled and the linkDown traps is enabled. 
.1.3.6.1.4.1.11.2.14.11.15.8.35.9.1.10,HPN-ICF-LswDEVM-MIB::hpnicfdot1qTpFdbLearnStatus,INTEGER,read-write,,current,enabled(1):disabled(2), Enable/Disable the address learning.
.1.3.6.1.4.1.11.2.14.11.15.8.35.9.1.11,HPN-ICF-LswDEVM-MIB::hpnicfCfmWriteFlash,INTEGER,read-write,,current,write(1), Write the current effective configuration into the Flash memory. This object does not support read operation.
.1.3.6.1.4.1.11.2.14.11.15.8.35.9.1.12,HPN-ICF-LswDEVM-MIB::hpnicfCfmEraseFlash,INTEGER,read-write,,current,erase(1), Delete the configuration from the Flash memory. This object does not support read operation.
.1.3.6.1.4.1.11.2.14.11.15.8.35.9.1.13,HPN-ICF-LswDEVM-MIB::hpnicfDevMFirstTrapTime,TimeTicks,accessible-for-notify,,current,,Represents the first trap time.
.1.3.6.1.4.1.11.2.14.11.15.8.35.9.1.14,HPN-ICF-LswDEVM-MIB::hpnicfdevMExternalAlarmStatus,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.8.35.12,HPN-ICF-OID-MIB::hpnicfLswTrapMib,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.8.35.12.1,HPN-ICF-LswTRAP-MIB::hpnicfsLswTRAPMibObject,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.8.35.12.1.1,HPN-ICF-LswTRAP-MIB::hpnicfpowerfailure,,,,,,Power supply failure
.1.3.6.1.4.1.11.2.14.11.15.8.35.12.1.2,HPN-ICF-LswTRAP-MIB::hpnicfPowerNormal,,,,,,Power supply normal
.1.3.6.1.4.1.11.2.14.11.15.8.35.12.1.3,HPN-ICF-LswTRAP-MIB::hpnicfMasterPowerNormal,,,,,,Master power supply normal
.1.3.6.1.4.1.11.2.14.11.15.8.35.12.1.4,HPN-ICF-LswTRAP-MIB::hpnicfSlavePowerNormal,,,,,,Slave power supply normal
.1.3.6.1.4.1.11.2.14.11.15.8.35.12.1.5,HPN-ICF-LswTRAP-MIB::hpnicfPowerRemoved,,,,,,Power removed
.1.3.6.1.4.1.11.2.14.11.15.8.35.12.1.6,HPN-ICF-LswTRAP-MIB::hpnicffanfailure,,,,,,Fan failure
.1.3.6.1.4.1.11.2.14.11.15.8.35.12.1.7,HPN-ICF-LswTRAP-MIB::hpnicfFanNormal,,,,,,Fan normal
.1.3.6.1.4.1.11.2.14.11.15.8.35.12.1.8,HPN-ICF-LswTRAP-MIB::hpnicfBoardRemoved,,,,,,Board removed
.1.3.6.1.4.1.11.2.14.11.15.8.35.12.1.9,HPN-ICF-LswTRAP-MIB::hpnicfBoardInserted,,,,,,Board inserted
.1.3.6.1.4.1.11.2.14.11.15.8.35.12.1.10,HPN-ICF-LswTRAP-MIB::hpnicfBoardFailure,,,,,,Board failed
.1.3.6.1.4.1.11.2.14.11.15.8.35.12.1.11,HPN-ICF-LswTRAP-MIB::hpnicfBoardNormal,,,,,,Board normal
.1.3.6.1.4.1.11.2.14.11.15.8.35.12.1.12,HPN-ICF-LswTRAP-MIB::hpnicfSubcardRemove,,,,,,Sub card removeed
.1.3.6.1.4.1.11.2.14.11.15.8.35.12.1.13,HPN-ICF-LswTRAP-MIB::hpnicfSubcardInsert,,,,,,Sub card inserted
.1.3.6.1.4.1.11.2.14.11.15.8.35.12.1.14,HPN-ICF-LswTRAP-MIB::hpnicfBoardTemperatureLower,,,,,,Board temperature low
.1.3.6.1.4.1.11.2.14.11.15.8.35.12.1.15,HPN-ICF-LswTRAP-MIB::hpnicfBoardTemperatureFromLowerToNormal,,,,,,Board temperature form lower to normal
.1.3.6.1.4.1.11.2.14.11.15.8.35.12.1.16,HPN-ICF-LswTRAP-MIB::hpnicfBoardTemperatureHigher,,,,,,Board temperature high
.1.3.6.1.4.1.11.2.14.11.15.8.35.12.1.17,HPN-ICF-LswTRAP-MIB::hpnicfBoardTemperatureFormHigherToNormal,,,,,,Board temperature from higher to normal
.1.3.6.1.4.1.11.2.14.11.15.8.35.12.1.18,HPN-ICF-LswTRAP-MIB::hpnicfRequestLoading,,,,,,Board request load
.1.3.6.1.4.1.11.2.14.11.15.8.35.12.1.19,HPN-ICF-LswTRAP-MIB::hpnicfLoadFailure,,,,,,Board load failure
.1.3.6.1.4.1.11.2.14.11.15.8.35.12.1.20,HPN-ICF-LswTRAP-MIB::hpnicfLoadFinished,,,,,,Board load finished
.1.3.6.1.4.1.11.2.14.11.15.8.35.12.1.21,HPN-ICF-LswTRAP-MIB::hpnicfBackBoardModeSetFuilure,,,,,,Back board mode set failure
.1.3.6.1.4.1.11.2.14.11.15.8.35.12.1.22,HPN-ICF-LswTRAP-MIB::hpnicfBackBoardModeSetOK,,,,,,Back board mode set OK
.1.3.6.1.4.1.11.2.14.11.15.8.35.12.1.23,HPN-ICF-LswTRAP-MIB::hpnicfPowerInserted,,,,,,Power inserted
.1.3.6.1.4.1.11.2.14.11.15.8.35.12.1.24,HPN-ICF-LswTRAP-MIB::hpnicfBootImageUpdated,,,,,,This trap node indicates that the boot image of specified board is updated.
.1.3.6.1.4.1.11.2.14.11.15.8.35.12.1.98,HPN-ICF-LswTRAP-MIB::hpnicfNetworkHealthMonitorFailure,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.8.35.12.1.99,HPN-ICF-LswTRAP-MIB::hpnicfNetworkHealthMonitorNormal,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.8.35.14,HPN-ICF-OID-MIB::hpnicfdot1sMstp,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.8.35.14.0,HPN-ICF-LswMSTP-MIB::hpnicfMstpEventsV2,,,,,,Definition point for Mstp notifications.
.1.3.6.1.4.1.11.2.14.11.15.8.35.14.0.1,HPN-ICF-LswMSTP-MIB::hpnicfPortMstiStateForwarding,,,,,,The SNMP trap that is generated when a port turns into forwarding state form other state.
.1.3.6.1.4.1.11.2.14.11.15.8.35.14.0.2,HPN-ICF-LswMSTP-MIB::hpnicfPortMstiStateDiscarding,,,,,,The SNMP trap that is generated when a port turns into discarding state form forwarding state.
.1.3.6.1.4.1.11.2.14.11.15.8.35.14.0.3,HPN-ICF-LswMSTP-MIB::hpnicfBridgeLostRootPrimary,,,,,,The SNMP trap that is generated when the bridge is no longer the root bridge of the instance. Another switch with higher priority has already been the root bridge of the instance.
.1.3.6.1.4.1.11.2.14.11.15.8.35.14.0.4,HPN-ICF-LswMSTP-MIB::hpnicfPortMstiRootGuarded,,,,,,The SNMP trap that is generated when a root-guard port receives a superior message on the relevant instance.
.1.3.6.1.4.1.11.2.14.11.15.8.35.14.0.5,HPN-ICF-LswMSTP-MIB::hpnicfPortMstiBpduGuarded,,,,,,The SNMP trap that is generated when an edged port of the BPDU-guard switch receives BPDU packets.
.1.3.6.1.4.1.11.2.14.11.15.8.35.14.0.6,HPN-ICF-LswMSTP-MIB::hpnicfPortMstiLoopGuarded,,,,,,The SNMP trap that is generated when an Alternate-Port or Root-Port is aged out.
.1.3.6.1.4.1.11.2.14.11.15.8.35.14.1,HPN-ICF-LswMSTP-MIB::hpnicfdot1sStpStatus,INTEGER,read-write,,current,enabled(1):disabled(2),Whether the Bridge MSTP is enabled.
.1.3.6.1.4.1.11.2.14.11.15.8.35.14.2,HPN-ICF-LswMSTP-MIB::hpnicfdot1sStpForceVersion,INTEGER,read-write,,current,stp(0):rstp(2):mstp(3), The mode of this Bridge spanning-tree protocol.
.1.3.6.1.4.1.11.2.14.11.15.8.35.14.3,HPN-ICF-LswMSTP-MIB::hpnicfdot1sStpDiameter,INTEGER,read-write,,current,,The diameter of Bridge.
.1.3.6.1.4.1.11.2.14.11.15.8.35.14.4,HPN-ICF-LswMSTP-MIB::hpnicfdot1sMstBridgeMaxHops,INTEGER,read-write,,current,,The maximum value of the Bridge hops.
.1.3.6.1.4.1.11.2.14.11.15.8.35.14.5,HPN-ICF-LswMSTP-MIB::hpnicfdot1sMstMasterBridgeID,OCTET,read-only,,current,,The Bridge Identifier of the current Master Bridge.
.1.3.6.1.4.1.11.2.14.11.15.8.35.14.6,HPN-ICF-LswMSTP-MIB::hpnicfdot1sMstMasterPathCost,INTEGER,read-only,,current,,The CIST path cost from the transmitting Bridge to the Master Bridge.
.1.3.6.1.4.1.11.2.14.11.15.8.35.14.7,HPN-ICF-LswMSTP-MIB::hpnicfdot1sMstBpduGuard,INTEGER,read-write,,current,enabled(1):disabled(2),Whether the Bridge BPDU Guard function is enabled. If the function is enabled, the port will shutdown when received BPDU and the port is configured as portfast.
.1.3.6.1.4.1.11.2.14.11.15.8.35.14.8,HPN-ICF-LswMSTP-MIB::hpnicfdot1sMstAdminFormatSelector,INTEGER,read-write,,current,,The administrative Configuration Identifier Format Selector in use by the Bridge. This has a value of 0 indicate the format specified in the Standard of IEEE 802.1s.
.1.3.6.1.4.1.11.2.14.11.15.8.35.14.9,HPN-ICF-LswMSTP-MIB::hpnicfdot1sMstAdminRegionName,OCTET,read-write,,current,,This MSTP administrative region name.
.1.3.6.1.4.1.11.2.14.11.15.8.35.14.10,HPN-ICF-LswMSTP-MIB::hpnicfdot1sMstAdminRevisionLevel,INTEGER,read-write,,current,,This MSTP administrative revision level.
.1.3.6.1.4.1.11.2.14.11.15.8.35.14.11,HPN-ICF-LswMSTP-MIB::hpnicfdot1sMstOperFormatSelector,INTEGER,read-only,,current,,The operative Configuration Identifier Format Selector in use by the Bridge. This has a value of 0 indicate the format specified in the Standard of IEEE 802.1s.
.1.3.6.1.4.1.11.2.14.11.15.8.35.14.12,HPN-ICF-LswMSTP-MIB::hpnicfdot1sMstOperRegionName,OCTET,read-only,,current,,This MSTP operative region name.
.1.3.6.1.4.1.11.2.14.11.15.8.35.14.13,HPN-ICF-LswMSTP-MIB::hpnicfdot1sMstOperRevisionLevel,INTEGER,read-only,,current,,This MSTP operative revision level.
.1.3.6.1.4.1.11.2.14.11.15.8.35.14.14,HPN-ICF-LswMSTP-MIB::hpnicfdot1sMstOperConfigDigest,OCTET,read-only,,current,,This MSTP Region's Configuration Digest Signature Key.
.1.3.6.1.4.1.11.2.14.11.15.8.35.14.15,HPN-ICF-LswMSTP-MIB::hpnicfdot1sMstRegionConfActive,INTEGER,read-write,,current,enable(1):disable(2),Active the region configuration.
.1.3.6.1.4.1.11.2.14.11.15.8.35.14.16,HPN-ICF-LswMSTP-MIB::hpnicfdot1sMstDefaultVlanAllo,INTEGER,read-write,,current,enable(1):unused(65535),Set default configuration about VLAN allocation and all VLANs are mapped to CIST.
.1.3.6.1.4.1.11.2.14.11.15.8.35.14.17,HPN-ICF-LswMSTP-MIB::hpnicfdot1sMstDefaultRegionName,INTEGER,read-write,,current,enable(1):unused(65535),Set default region name.
.1.3.6.1.4.1.11.2.14.11.15.8.35.14.18,HPN-ICF-LswMSTP-MIB::hpnicfdot1sVIDAllocationTable,,not-accessible,,current,,
.1.3.6.1.4.1.11.2.14.11.15.8.35.14.18.1,HPN-ICF-LswMSTP-MIB::hpnicfdot1sVIDAllocationEntry,,not-accessible,hpnicfdot1sMstVID,current,,
.1.3.6.1.4.1.11.2.14.11.15.8.35.14.18.1.1,HPN-ICF-LswMSTP-MIB::hpnicfdot1sMstVID,INTEGER,read-only,,current,,VLAN Identifier
.1.3.6.1.4.1.11.2.14.11.15.8.35.14.18.1.2,HPN-ICF-LswMSTP-MIB::hpnicfdot1sAdminMstID,INTEGER,read-write,,current,,Administrative Multiple spanning-tree instance Identifier.
.1.3.6.1.4.1.11.2.14.11.15.8.35.14.18.1.3,HPN-ICF-LswMSTP-MIB::hpnicfdot1sOperMstID,INTEGER,read-only,,current,,Operative Multiple spanning-tree instance Identifier.
.1.3.6.1.4.1.11.2.14.11.15.8.35.14.19,HPN-ICF-LswMSTP-MIB::hpnicfdot1sInstanceTable,,not-accessible,,current,,
.1.3.6.1.4.1.11.2.14.11.15.8.35.14.19.1,HPN-ICF-LswMSTP-MIB::hpnicfdot1sInstanceEntry,,not-accessible,hpnicfdot1sInstanceID,current,,
.1.3.6.1.4.1.11.2.14.11.15.8.35.14.19.1.1,HPN-ICF-LswMSTP-MIB::hpnicfdot1sInstanceID,INTEGER,read-only,,current,,Multiple spanning-tree instance Identifier
.1.3.6.1.4.1.11.2.14.11.15.8.35.14.19.1.2,HPN-ICF-LswMSTP-MIB::hpnicfdot1sMstiBridgeID,OCTET,read-only,,current,,The Bridge Identifier for the spanning tree instance identified by MSTID
.1.3.6.1.4.1.11.2.14.11.15.8.35.14.19.1.3,HPN-ICF-LswMSTP-MIB::hpnicfdot1sMstiBridgePriority,INTEGER,read-write,,current,,The Bridge Priority for the spanning tree instance identified by MSTID. Step of 4096
.1.3.6.1.4.1.11.2.14.11.15.8.35.14.19.1.4,HPN-ICF-LswMSTP-MIB::hpnicfdot1sMstiDesignedRoot,OCTET,read-only,,current,,The Bridge Identifier of the Root Bridge for the spanning tree instance identified by MSTID
.1.3.6.1.4.1.11.2.14.11.15.8.35.14.19.1.5,HPN-ICF-LswMSTP-MIB::hpnicfdot1sMstiRootPathCost,INTEGER,read-only,,current,,The path cost from the transmitting Bridge to the Root Bridge for the spanning tree instance identified by MSTID
.1.3.6.1.4.1.11.2.14.11.15.8.35.14.19.1.6,HPN-ICF-LswMSTP-MIB::hpnicfdot1sMstiRootPort,INTEGER,read-only,,current,,The Root Port for the spanning tree instance identified by the MSTID
.1.3.6.1.4.1.11.2.14.11.15.8.35.14.19.1.7,HPN-ICF-LswMSTP-MIB::hpnicfdot1sMstiRootType,INTEGER,read-write,,current,normal(0):secondary(1):primary(2),Config this Bridge as a primary root or secondary root and or cancel the root for this spanning tree instance identified by MSTID
.1.3.6.1.4.1.11.2.14.11.15.8.35.14.19.1.8,HPN-ICF-LswMSTP-MIB::hpnicfdot1sMstiRemainingHops,INTEGER,read-only,,current,,The remaining hops of the spanning tree instance identified by MSTID
.1.3.6.1.4.1.11.2.14.11.15.8.35.14.19.1.9,HPN-ICF-LswMSTP-MIB::hpnicfdot1sMstiAdminMappedVlanListLow,OCTET,read-only,,current,, The lower part of administrative Vlan list mapped to the spanning tree instance identified by MSTID
.1.3.6.1.4.1.11.2.14.11.15.8.35.14.19.1.10,HPN-ICF-LswMSTP-MIB::hpnicfdot1sMstiAdminMappedVlanListHigh,OCTET,read-only,,current,, The higher part of administrative Vlan list mapped to the spanning tree instance identified by MSTID
.1.3.6.1.4.1.11.2.14.11.15.8.35.14.19.1.11,HPN-ICF-LswMSTP-MIB::hpnicfdot1sMstiOperMappedVlanListLow,OCTET,read-only,,current,, The lower part of operative Vlan list mapped to the spanning tree instance identified by MSTID
.1.3.6.1.4.1.11.2.14.11.15.8.35.14.19.1.12,HPN-ICF-LswMSTP-MIB::hpnicfdot1sMstiOperMappedVlanListHigh,OCTET,read-only,,current,, The higher part of operative Vlan list mapped to the spanning tree instance identified by MSTID
.1.3.6.1.4.1.11.2.14.11.15.8.35.14.20,HPN-ICF-LswMSTP-MIB::hpnicfdot1sPortTable,,not-accessible,,current,,
.1.3.6.1.4.1.11.2.14.11.15.8.35.14.20.1,HPN-ICF-LswMSTP-MIB::hpnicfdot1sPortEntry,,not-accessible,hpnicfdot1sInstanceID:hpnicfdot1sMstiPortIndex,current,,
.1.3.6.1.4.1.11.2.14.11.15.8.35.14.20.1.1,HPN-ICF-LswMSTP-MIB::hpnicfdot1sMstiPortIndex,INTEGER,read-only,,current,,The index of the Bridge Port
.1.3.6.1.4.1.11.2.14.11.15.8.35.14.20.1.2,HPN-ICF-LswMSTP-MIB::hpnicfdot1sMstiState,INTEGER,read-only,,current,disabled(1):discarding(2):learning(4):forwarding(5),The current state of the Port (i.e., Disabled, Discarding , Learning, Forwarding)
.1.3.6.1.4.1.11.2.14.11.15.8.35.14.20.1.3,HPN-ICF-LswMSTP-MIB::hpnicfdot1sMstiPortPriority,INTEGER,read-write,,current,,The value of the priority field which is contained in the first (in network byte order) four bits of the (2 octet long) Port ID. The other octet of the Port ID is given by the value of mstiPortIndex. And step of 16
.1.3.6.1.4.1.11.2.14.11.15.8.35.14.20.1.4,HPN-ICF-LswMSTP-MIB::hpnicfdot1sMstiPathCost,INTEGER,read-write,,current,,The contribution of this port to the path cost of paths towards the spanning tree root which include this port. The range of path cost is 1..65535 for 802.1d standard, is 1..200000000 for 802.1t standard, and is 1..200000 for the legacy standard. 
.1.3.6.1.4.1.11.2.14.11.15.8.35.14.20.1.5,HPN-ICF-LswMSTP-MIB::hpnicfdot1sMstiDesignatedRoot,OCTET,read-only,,current,,The Bridge Identifier of the Root Bridge for the port of the Spanning Tree instance identified by the MSTID
.1.3.6.1.4.1.11.2.14.11.15.8.35.14.20.1.6,HPN-ICF-LswMSTP-MIB::hpnicfdot1sMstiDesignatedCost,INTEGER,read-only,,current,,The path cost of the Designated Port of the segment connected to this port. This value is compared to the Root Path Cost field in received bridge PDUs.
.1.3.6.1.4.1.11.2.14.11.15.8.35.14.20.1.7,HPN-ICF-LswMSTP-MIB::hpnicfdot1sMstiDesignatedBridge,OCTET,read-only,,current,,The Bridge Identifier of the bridge which this port considers to be the Designated Bridge for this port's segment.
.1.3.6.1.4.1.11.2.14.11.15.8.35.14.20.1.8,HPN-ICF-LswMSTP-MIB::hpnicfdot1sMstiDesignatedPort,OCTET,read-only,,current,,The Port Identifier of the port on the Designated Bridge for this port's segment.
.1.3.6.1.4.1.11.2.14.11.15.8.35.14.20.1.9,HPN-ICF-LswMSTP-MIB::hpnicfdot1sMstiMasterBridgeID,OCTET,read-only,,current,,The Bridge Idnetifier of the current Master Bridge. Effective in CIST.
.1.3.6.1.4.1.11.2.14.11.15.8.35.14.20.1.10,HPN-ICF-LswMSTP-MIB::hpnicfdot1sMstiMasterPortCost,INTEGER,read-only,,current,,The CIST path cost from the transmitting Bridge to the Master Bridge. Effective in CIST.
.1.3.6.1.4.1.11.2.14.11.15.8.35.14.20.1.11,HPN-ICF-LswMSTP-MIB::hpnicfdot1sMstiStpPortEdgeport,INTEGER,read-write,,current,enabled(1):disabled(2), Whether the port fast is enabled. Effective in CIST.
.1.3.6.1.4.1.11.2.14.11.15.8.35.14.20.1.12,HPN-ICF-LswMSTP-MIB::hpnicfdot1sMstiStpPortPointToPoint,INTEGER,read-write,,current,forceTrue(1):forceFalse(2):auto(3), Whether the port connects the point to point link. Effective in CIST.
.1.3.6.1.4.1.11.2.14.11.15.8.35.14.20.1.13,HPN-ICF-LswMSTP-MIB::hpnicfdot1sMstiStpMcheck,INTEGER,read-write,,current,enable(1):unused(65535), Forcing the state machine to send MST BPDUs in this manner can be used to test whether all legacy Bridges on a given LAN have been removed. Effective in CIST.
.1.3.6.1.4.1.11.2.14.11.15.8.35.14.20.1.14,HPN-ICF-LswMSTP-MIB::hpnicfdot1sMstiStpTransLimit,INTEGER,read-write,,current,,The value used by the Port Transmit state machine to limit the maximum transmission rate. Effective in CIST.
.1.3.6.1.4.1.11.2.14.11.15.8.35.14.20.1.15,HPN-ICF-LswMSTP-MIB::hpnicfdot1sMstiStpRXStpBPDU,Counter32,read-only,,current,,The number of received Config BPDU. Effective in CIST.
.1.3.6.1.4.1.11.2.14.11.15.8.35.14.20.1.16,HPN-ICF-LswMSTP-MIB::hpnicfdot1sMstiStpTXStpBPDU,Counter32,read-only,,current,,The number of transmitted Config BPDU. Effective in CIST.
.1.3.6.1.4.1.11.2.14.11.15.8.35.14.20.1.17,HPN-ICF-LswMSTP-MIB::hpnicfdot1sMstiStpRXTCNBPDU,Counter32,read-only,,current,,The number of received TCN BPDU. Effective in CIST.
.1.3.6.1.4.1.11.2.14.11.15.8.35.14.20.1.18,HPN-ICF-LswMSTP-MIB::hpnicfdot1sMstiStpTXTCNBPDU,Counter32,read-only,,current,,The number of transimitted TCN BPDU. Effective in CIST.
.1.3.6.1.4.1.11.2.14.11.15.8.35.14.20.1.19,HPN-ICF-LswMSTP-MIB::hpnicfdot1sMstiStpRXRSTPBPDU,Counter32,read-only,,current,,The number of received RST BPDU. Effective in CIST.
.1.3.6.1.4.1.11.2.14.11.15.8.35.14.20.1.20,HPN-ICF-LswMSTP-MIB::hpnicfdot1sMstiStpTXRSTPBPDU,Counter32,read-only,,current,,The number of transimitted RST BPDU. Effective in CIST.
.1.3.6.1.4.1.11.2.14.11.15.8.35.14.20.1.21,HPN-ICF-LswMSTP-MIB::hpnicfdot1sMstiStpRXMSTPBPDU,Counter32,read-only,,current,,The number of received MST BPDU. Effective in CIST.
.1.3.6.1.4.1.11.2.14.11.15.8.35.14.20.1.22,HPN-ICF-LswMSTP-MIB::hpnicfdot1sMstiStpTXMSTPBPDU,Counter32,read-only,,current,,The number of transimitted MST BPDU. Effective in CIST.
.1.3.6.1.4.1.11.2.14.11.15.8.35.14.20.1.23,HPN-ICF-LswMSTP-MIB::hpnicfdot1sMstiStpClearStatistics,INTEGER,read-write,,current,clear(1):unused(65535),Clear the spanning tree statistic. Effective in CIST.
.1.3.6.1.4.1.11.2.14.11.15.8.35.14.20.1.24,HPN-ICF-LswMSTP-MIB::hpnicfdot1sMstiStpDefaultPortCost,INTEGER,read-write,,current,enable(1):unused(65535),Set default Port path cost. 
.1.3.6.1.4.1.11.2.14.11.15.8.35.14.20.1.25,HPN-ICF-LswMSTP-MIB::hpnicfdot1sMstiStpStatus,INTEGER,read-write,,current,enabled(1):disabled(2),Whether the spanning tree protocol is enabled on this port. Effective in CIST.
.1.3.6.1.4.1.11.2.14.11.15.8.35.14.20.1.26,HPN-ICF-LswMSTP-MIB::hpnicfdot1sMstiPortRootGuard,INTEGER,read-write,,current,enabled(1):disabled(2),Whether the root guard is enabled. Effective in CIST.
.1.3.6.1.4.1.11.2.14.11.15.8.35.14.20.1.27,HPN-ICF-LswMSTP-MIB::hpnicfdot1sMstiPortLoopGuard,INTEGER,read-write,,current,enabled(1):disabled(2),Whether the loop protection is enabled. Effective in CIST.
.1.3.6.1.4.1.11.2.14.11.15.8.35.14.20.1.28,HPN-ICF-LswMSTP-MIB::hpnicfdot1sMstiStpPortSendingBPDUType,INTEGER,read-only,,current,stp(1):rstp(2):mstp(3),Type of BPDU which the port is sending.
.1.3.6.1.4.1.11.2.14.11.15.8.35.14.20.1.29,HPN-ICF-LswMSTP-MIB::hpnicfdot1sMstiStpOperPortPointToPoint,INTEGER,read-only,,current,true(1):false(2),This object indicates whether the port has connected to a point-to-point link or not. The value of the node is an operative value. The administrative value can be read from the node hpnicfdot1sMstiStpPortPointToPoint. If the value of hpnicfdot1sMstiStpPortPointToPoint is auto, the value of this node should be calculated by the network topology of this port. If the value of hpnicfdot1sMstiStpPortPointToPoint is forceFalse, the value of this node is false. If the value of hpnicfdot1sMstiStpPortPointToPoint is forceTrue, the value of this node is true.
.1.3.6.1.4.1.11.2.14.11.15.8.35.14.20.1.30,HPN-ICF-LswMSTP-MIB::hpnicfdot1sMstiStpPortAdminBPDUFmt,INTEGER,read-write,,current,legacy(1):dot1s(2):auto(3),The value of the node is an administrative value. Value legacy means that the MST BPDU format is forced to legacy. Value dot1s means that the MST BPDU format is forced to IEEE 802.1s. Value auto means that the format of MST BPDU sending on the port is determined by the MST BPDU that the port has received. Effective in CIST.
.1.3.6.1.4.1.11.2.14.11.15.8.35.14.20.1.31,HPN-ICF-LswMSTP-MIB::hpnicfdot1sMstiStpPortOperBPDUFmt,INTEGER,read-only,,current,legacy(1):dot1s(2):auto(3),The format of MST BPDU which the port is sending. Value legacy means that the format of MST BPDU sending on the port is legacy. Value dot1s means that the format of MST BPDU sending on the port is IEEE 802.1s. Effective in CIST.
.1.3.6.1.4.1.11.2.14.11.15.8.35.14.20.1.32,HPN-ICF-LswMSTP-MIB::hpnicfdot1sMstiStpPortRoleRestriction,INTEGER,read-write,,current,enabled(1):disabled(2),Whether the role-restriction is enabled. Effective in CIST. The role-restriction causes the port not to be selected as root port for the CIST or any MSTI.
.1.3.6.1.4.1.11.2.14.11.15.8.35.14.20.1.33,HPN-ICF-LswMSTP-MIB::hpnicfdot1sMstiStpPortTcRestriction,INTEGER,read-write,,current,enabled(1):disabled(2),Whether the tc-restriction is enabled. Effective in CIST. The tc-restriction causes the port not to propagate topology changes to other ports.
.1.3.6.1.4.1.11.2.14.11.15.8.35.14.20.1.34,HPN-ICF-LswMSTP-MIB::hpnicfdot1sMstiStpPortDisputed,INTEGER,read-only,,current,true(1):false(2),Whether the port is disputed for the CIST or MSTI.
.1.3.6.1.4.1.11.2.14.11.15.8.35.14.21,HPN-ICF-LswMSTP-MIB::hpnicfdot1sStpPathCostStandard,INTEGER,read-write,,current,legacy(0):dot1d-1998(1):dot1t(2),Path cost standard of the bridge. Value dot1d-1998 is IEEE 802.1d standard in 1998, value dot1t is IEEE 802.1t standard, and value legacy is a private legacy standard.
.1.3.6.1.4.1.11.2.14.11.15.8.35.16,HPN-ICF-OID-MIB::hpnicfLswQosAclMib,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.8.35.16.2,HPN-ICF-LswQos-MIB::hpnicfLswQosMibObject,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.8.35.16.2.1,HPN-ICF-LswQos-MIB::hpnicfPriorityTrustMode,INTEGER,read-write,,current,default(0):dscp(1):ipprecedence(2):cos(3):localprecedence(4),Priority type of inbound queue.
.1.3.6.1.4.1.11.2.14.11.15.8.35.16.2.2,HPN-ICF-LswQos-MIB::hpnicfPortMonitorBothIfIndex,INTEGER,read-write,,current,,The ifIndex of in/out monitor port.
.1.3.6.1.4.1.11.2.14.11.15.8.35.16.2.3,HPN-ICF-LswQos-MIB::hpnicfQueueTable,,not-accessible,,current,,Queue table which contains queue entry.
.1.3.6.1.4.1.11.2.14.11.15.8.35.16.2.3.1,HPN-ICF-LswQos-MIB::hpnicfQueueEntry,,not-accessible,hpnicfQueueIfIndex,current,,The configuration information of queue.
.1.3.6.1.4.1.11.2.14.11.15.8.35.16.2.3.1.1,HPN-ICF-LswQos-MIB::hpnicfQueueIfIndex,INTEGER,read-only,,current,,ifIndex of port.
.1.3.6.1.4.1.11.2.14.11.15.8.35.16.2.3.1.2,HPN-ICF-LswQos-MIB::hpnicfQueueScheduleMode,INTEGER,read-write,,current,sp(1):wrr(2):wrr-max-delay(3):sc-0(4):sc-1(5):sc-2(6):rr(7):wfq(8):hq-wrr(9),The mode of the queue schedule.
.1.3.6.1.4.1.11.2.14.11.15.8.35.16.2.3.1.3,HPN-ICF-LswQos-MIB::hpnicfQueueWeight1,INTEGER,read-write,,current,,If queue mode is wfq, then hpnicfQueueWeight1 represent the bandwidth of queue 1. If queue mode is wrr, then hpnicfQueueWeight1 represent the weight of queue 1.
.1.3.6.1.4.1.11.2.14.11.15.8.35.16.2.3.1.4,HPN-ICF-LswQos-MIB::hpnicfQueueWeight2,INTEGER,read-write,,current,,If queue mode is wfq, then hpnicfQueueWeight2 represent the bandwidth of queue 2. If queue mode is wrr, then hpnicfQueueWeight2 represent the weight of queue 2.
.1.3.6.1.4.1.11.2.14.11.15.8.35.16.2.3.1.5,HPN-ICF-LswQos-MIB::hpnicfQueueWeight3,INTEGER,read-write,,current,,If queue mode is wfq, then hpnicfQueueWeight3 represent the bandwidth of queue 3. If queue mode is wrr, then hpnicfQueueWeight3 represent the weight of queue 3.
.1.3.6.1.4.1.11.2.14.11.15.8.35.16.2.3.1.6,HPN-ICF-LswQos-MIB::hpnicfQueueWeight4,INTEGER,read-write,,current,,If queue mode is wfq, then hpnicfQueueWeight4 represent the bandwidth of queue 4. If queue mode is wrr, then hpnicfQueueWeight4 represent the weight of queue 4.
.1.3.6.1.4.1.11.2.14.11.15.8.35.16.2.3.1.7,HPN-ICF-LswQos-MIB::hpnicfQueueMaxDelay,INTEGER,read-write,,current,, 
.1.3.6.1.4.1.11.2.14.11.15.8.35.16.2.3.1.8,HPN-ICF-LswQos-MIB::hpnicfQueueWeight5,INTEGER,read-write,,current,,If queue mode is wfq, then hpnicfQueueWeight5 represent the bandwidth of queue 5. If queue mode is wrr, then hpnicfQueueWeight5 represent the weight of queue 5.
.1.3.6.1.4.1.11.2.14.11.15.8.35.16.2.3.1.9,HPN-ICF-LswQos-MIB::hpnicfQueueWeight6,INTEGER,read-write,,current,,If queue mode is wfq, then hpnicfQueueWeight6 represent the bandwidth of queue 6. If queue mode is wrr, then hpnicfQueueWeight6 represent the weight of queue 6.
.1.3.6.1.4.1.11.2.14.11.15.8.35.16.2.3.1.10,HPN-ICF-LswQos-MIB::hpnicfQueueWeight7,INTEGER,read-write,,current,,If queue mode is wfq, then hpnicfQueueWeight7 represent the bandwidth of queue 7. If queue mode is wrr, then hpnicfQueueWeight7 represent the weight of queue 7.
.1.3.6.1.4.1.11.2.14.11.15.8.35.16.2.3.1.11,HPN-ICF-LswQos-MIB::hpnicfQueueWeight8,INTEGER,read-write,,current,,If queue mode is wfq, then hpnicfQueueWeight8 represent the bandwidth of queue 8. If queue mode is wrr, then hpnicfQueueWeight8 represent the weight of queue 8.
.1.3.6.1.4.1.11.2.14.11.15.8.35.16.2.4,HPN-ICF-LswQos-MIB::hpnicfRateLimitTable,,not-accessible,,current,,Rate limit table which contains limit entry. 
.1.3.6.1.4.1.11.2.14.11.15.8.35.16.2.4.1,HPN-ICF-LswQos-MIB::hpnicfRateLimitEntry,,not-accessible,hpnicfRateLimitAclIndex:hpnicfRateLimitIfIndex:hpnicfRateLimitVlanID:hpnicfRateLimitDirection,current,,The configuration information of the rate-limited port.
.1.3.6.1.4.1.11.2.14.11.15.8.35.16.2.4.1.1,HPN-ICF-LswQos-MIB::hpnicfRateLimitAclIndex,INTEGER,read-create,,current,,Index of acl rule.
.1.3.6.1.4.1.11.2.14.11.15.8.35.16.2.4.1.2,HPN-ICF-LswQos-MIB::hpnicfRateLimitIfIndex,INTEGER,read-create,,current,,ifIndex of the rate-limited port.
.1.3.6.1.4.1.11.2.14.11.15.8.35.16.2.4.1.3,HPN-ICF-LswQos-MIB::hpnicfRateLimitVlanID,INTEGER,read-create,,current,,Vlan ID.
.1.3.6.1.4.1.11.2.14.11.15.8.35.16.2.4.1.4,HPN-ICF-LswQos-MIB::hpnicfRateLimitDirection,INTEGER,read-create,,current,invalid(0):input(1):output(2),Direction of the rate-limited port.
.1.3.6.1.4.1.11.2.14.11.15.8.35.16.2.4.1.5,HPN-ICF-LswQos-MIB::hpnicfRateLimitUserAclNum,INTEGER,read-create,,current,,The number of user acl.
.1.3.6.1.4.1.11.2.14.11.15.8.35.16.2.4.1.6,HPN-ICF-LswQos-MIB::hpnicfRateLimitUserAclRule,INTEGER,read-create,,current,,The number of user acl-rule.
.1.3.6.1.4.1.11.2.14.11.15.8.35.16.2.4.1.7,HPN-ICF-LswQos-MIB::hpnicfRateLimitIpAclNum,INTEGER,read-create,,current,,The number of Ip acl.
.1.3.6.1.4.1.11.2.14.11.15.8.35.16.2.4.1.8,HPN-ICF-LswQos-MIB::hpnicfRateLimitIpAclRule,INTEGER,read-create,,current,,The number of Ip acl-rule.
.1.3.6.1.4.1.11.2.14.11.15.8.35.16.2.4.1.9,HPN-ICF-LswQos-MIB::hpnicfRateLimitLinkAclNum,INTEGER,read-create,,current,,The number of link acl.
.1.3.6.1.4.1.11.2.14.11.15.8.35.16.2.4.1.10,HPN-ICF-LswQos-MIB::hpnicfRateLimitLinkAclRule,INTEGER,read-create,,current,,The number of link acl-rule.
.1.3.6.1.4.1.11.2.14.11.15.8.35.16.2.4.1.11,HPN-ICF-LswQos-MIB::hpnicfRateLimitTargetRateMbps,INTEGER,read-create,,current,,Target rate: Mbps.
.1.3.6.1.4.1.11.2.14.11.15.8.35.16.2.4.1.12,HPN-ICF-LswQos-MIB::hpnicfRateLimitTargetRateKbps,INTEGER,read-create,,current,,Target rate: Kbps.
.1.3.6.1.4.1.11.2.14.11.15.8.35.16.2.4.1.13,HPN-ICF-LswQos-MIB::hpnicfRateLimitPeakRate,INTEGER,read-create,,current,,Peak rate of the rate-limited port.
.1.3.6.1.4.1.11.2.14.11.15.8.35.16.2.4.1.14,HPN-ICF-LswQos-MIB::hpnicfRateLimitCIR,INTEGER,read-create,,current,,CIR of the rate-limited port.
.1.3.6.1.4.1.11.2.14.11.15.8.35.16.2.4.1.15,HPN-ICF-LswQos-MIB::hpnicfRateLimitCBS,INTEGER,read-create,,current,,Burst traffic of the rate-limited port.
.1.3.6.1.4.1.11.2.14.11.15.8.35.16.2.4.1.16,HPN-ICF-LswQos-MIB::hpnicfRateLimitEBS,INTEGER,read-create,,current,,Excess burst traffic of the rate-limited port.
.1.3.6.1.4.1.11.2.14.11.15.8.35.16.2.4.1.17,HPN-ICF-LswQos-MIB::hpnicfRateLimitPIR,INTEGER,read-create,,current,,PIR of the rate-limited port.
.1.3.6.1.4.1.11.2.14.11.15.8.35.16.2.4.1.18,HPN-ICF-LswQos-MIB::hpnicfRateLimitConformLocalPre,INTEGER,read-create,,current,,Conform local pre.
.1.3.6.1.4.1.11.2.14.11.15.8.35.16.2.4.1.19,HPN-ICF-LswQos-MIB::hpnicfRateLimitConformActionType,INTEGER,read-create,,current,invalid(0):remark-cos(1):remark-drop-priority(2):remark-cos-drop-priority(3):remark-policed-service(4):remark-dscp(5),Conform action type.
.1.3.6.1.4.1.11.2.14.11.15.8.35.16.2.4.1.20,HPN-ICF-LswQos-MIB::hpnicfRateLimitExceedActionType,INTEGER,read-create,,current,invalid(0):forward(1):drop(2):remarkdscp(3):exceed-cos(4),Exceed action type.
.1.3.6.1.4.1.11.2.14.11.15.8.35.16.2.4.1.21,HPN-ICF-LswQos-MIB::hpnicfRateLimitExceedDscp,INTEGER,read-create,,current,,Exceed DSCP. <0-63> Value of DSCP af11 Specify Assured Forwarding 11 service(10) af12 Specify Assured Forwarding 12 service(12) af13 Specify Assured Forwarding 13 service(14) af21 Specify Assured Forwarding 21 service(18) af22 Specify Assured Forwarding 22 service(20) af23 Specify Assured Forwarding 23 service(22) af31 Specify Assured Forwarding 31 service(26) af32 Specify Assured Forwarding 32 service(28) af33 Specify Assured Forwarding 33 service(30) af41 Specify Assured Forwarding 41 service(34) af42 Specify Assured Forwarding 42 service(36) af43 Specify Assured Forwarding 43 service(38) be Specify Best Effort service(0) cs1 Specify Class Selector 1 service(8) cs2 Specify Class Selector 2 service(16) cs3 Specify Class Selector 3 service(24) cs4 Specify Class Selector 4 service(32) cs5 Specify Class Selector 5 service(40) cs6 Specify Class Selector 6 service(48) cs7 Specify Class Selector 7 service(56) ef Specify Expedited Forwarding service(46)
.1.3.6.1.4.1.11.2.14.11.15.8.35.16.2.4.1.22,HPN-ICF-LswQos-MIB::hpnicfRateLimitRuntime,INTEGER,read-only,,current,true(1):false(2),Runtime.
.1.3.6.1.4.1.11.2.14.11.15.8.35.16.2.4.1.23,HPN-ICF-LswQos-MIB::hpnicfRateLimitRowStatus,INTEGER,read-create,,current,active(1):notInService(2):notReady(3):createAndGo(4):createAndWait(5):destroy(6),RowStatus, now support three status: createAndGo, active, destroy.
.1.3.6.1.4.1.11.2.14.11.15.8.35.16.2.4.1.24,HPN-ICF-LswQos-MIB::hpnicfRateLimitExceedCos,INTEGER,read-create,,current,,Exceeding COS of rate-limited port.
.1.3.6.1.4.1.11.2.14.11.15.8.35.16.2.4.1.25,HPN-ICF-LswQos-MIB::hpnicfRateLimitConformCos,INTEGER,read-create,,current,,If the user choose remark-cos value of the hpnicfRateLimitConformActionType, This object can be used to set the conform COS value. There are a few enumerations as follows: background Specify background priority(1) best-effort Specify best-effort priority(0) controlled-load Specify controlled-load priority(4) excellent-effort Specify excellent-effort priority(3) network-management Specify network-management priority(7) spare Specify spare priority(2) video Specify video priority(5) voice Specify voice priority(6)
.1.3.6.1.4.1.11.2.14.11.15.8.35.16.2.4.1.26,HPN-ICF-LswQos-MIB::hpnicfRateLimitConformDscp,INTEGER,read-create,,current,,If the user choose remark-dscp value of the hpnicfRateLimitConformActionType, This object can be used to set the conform dscp value. There are a few enumerations as follows: <0-63> Value of DSCP af11 Specify Assured Forwarding 11 service(10) af12 Specify Assured Forwarding 12 service(12) af13 Specify Assured Forwarding 13 service(14) af21 Specify Assured Forwarding 21 service(18) af22 Specify Assured Forwarding 22 service(20) af23 Specify Assured Forwarding 23 service(22) af31 Specify Assured Forwarding 31 service(26) af32 Specify Assured Forwarding 32 service(28) af33 Specify Assured Forwarding 33 service(30) af41 Specify Assured Forwarding 41 service(34) af42 Specify Assured Forwarding 42 service(36) af43 Specify Assured Forwarding 43 service(38) be Specify Best Effort service(0) cs1 Specify Class Selector 1 service(8) cs2 Specify Class Selector 2 service(16) cs3 Specify Class Selector 3 service(24) cs4 Specify Class Selector 4 service(32) cs5 Specify Class Selector 5 service(40) cs6 Specify Class Selector 6 service(48) cs7 Specify Class Selector 7 service(56) ef Specify Expedited Forwarding service(46)
.1.3.6.1.4.1.11.2.14.11.15.8.35.16.2.4.1.27,HPN-ICF-LswQos-MIB::hpnicfRateLimitMeterStatByteCount,Counter64,read-only,,current,,The counter of conform byte.
.1.3.6.1.4.1.11.2.14.11.15.8.35.16.2.4.1.28,HPN-ICF-LswQos-MIB::hpnicfRateLimitMeterStatByteXCount,Counter64,read-only,,current,,The counter of exceed byte.
.1.3.6.1.4.1.11.2.14.11.15.8.35.16.2.4.1.29,HPN-ICF-LswQos-MIB::hpnicfRateLimitMeterStatState,INTEGER,read-create,,current,set(1):unDo(2):reset(3):running(4):notRunning(5),The status of meter statistic.
.1.3.6.1.4.1.11.2.14.11.15.8.35.16.2.5,HPN-ICF-LswQos-MIB::hpnicfPriorityTable,,not-accessible,,current,,The priority table which contains priority entry.
.1.3.6.1.4.1.11.2.14.11.15.8.35.16.2.5.1,HPN-ICF-LswQos-MIB::hpnicfPriorityEntry,,not-accessible,hpnicfPriorityAclIndex:hpnicfPriorityIfIndex:hpnicfPriorityVlanID:hpnicfPriorityDirection,current,,The configuration information of priority.
.1.3.6.1.4.1.11.2.14.11.15.8.35.16.2.5.1.1,HPN-ICF-LswQos-MIB::hpnicfPriorityAclIndex,INTEGER,read-create,,current,,Index of acl rule.
.1.3.6.1.4.1.11.2.14.11.15.8.35.16.2.5.1.2,HPN-ICF-LswQos-MIB::hpnicfPriorityIfIndex,INTEGER,read-create,,current,,ifIndex of the port.
.1.3.6.1.4.1.11.2.14.11.15.8.35.16.2.5.1.3,HPN-ICF-LswQos-MIB::hpnicfPriorityVlanID,INTEGER,read-create,,current,,Vlan ID.
.1.3.6.1.4.1.11.2.14.11.15.8.35.16.2.5.1.4,HPN-ICF-LswQos-MIB::hpnicfPriorityDirection,INTEGER,read-create,,current,invalid(0):input(1):output(2),Direction of data stream.
.1.3.6.1.4.1.11.2.14.11.15.8.35.16.2.5.1.5,HPN-ICF-LswQos-MIB::hpnicfPriorityUserAclNum,INTEGER,read-create,,current,,The number of user acl.
.1.3.6.1.4.1.11.2.14.11.15.8.35.16.2.5.1.6,HPN-ICF-LswQos-MIB::hpnicfPriorityUserAclRule,INTEGER,read-create,,current,,The subitem of the user acl.
.1.3.6.1.4.1.11.2.14.11.15.8.35.16.2.5.1.7,HPN-ICF-LswQos-MIB::hpnicfPriorityIpAclNum,INTEGER,read-create,,current,,The number of Ip acl.
.1.3.6.1.4.1.11.2.14.11.15.8.35.16.2.5.1.8,HPN-ICF-LswQos-MIB::hpnicfPriorityIpAclRule,INTEGER,read-create,,current,,The subitem of the IP acl.
.1.3.6.1.4.1.11.2.14.11.15.8.35.16.2.5.1.9,HPN-ICF-LswQos-MIB::hpnicfPriorityLinkAclNum,INTEGER,read-create,,current,,The number of Link acl.
.1.3.6.1.4.1.11.2.14.11.15.8.35.16.2.5.1.10,HPN-ICF-LswQos-MIB::hpnicfPriorityLinkAclRule,INTEGER,read-create,,current,,The subitem of the link acl.
.1.3.6.1.4.1.11.2.14.11.15.8.35.16.2.5.1.11,HPN-ICF-LswQos-MIB::hpnicfPriorityDscp,INTEGER,read-create,,current,,Set DSCP Value. <0-63> Value of DSCP af11 Specify Assured Forwarding 11 service(10) af12 Specify Assured Forwarding 12 service(12) af13 Specify Assured Forwarding 13 service(14) af21 Specify Assured Forwarding 21 service(18) af22 Specify Assured Forwarding 22 service(20) af23 Specify Assured Forwarding 23 service(22) af31 Specify Assured Forwarding 31 service(26) af32 Specify Assured Forwarding 32 service(28) af33 Specify Assured Forwarding 33 service(30) af41 Specify Assured Forwarding 41 service(34) af42 Specify Assured Forwarding 42 service(36) af43 Specify Assured Forwarding 43 service(38) be Specify Best Effort service(0) cs1 Specify Class Selector 1 service(8) cs2 Specify Class Selector 2 service(16) cs3 Specify Class Selector 3 service(24) cs4 Specify Class Selector 4 service(32) cs5 Specify Class Selector 5 service(40) cs6 Specify Class Selector 6 service(48) cs7 Specify Class Selector 7 service(56) ef Specify Expedited Forwarding service(46)
.1.3.6.1.4.1.11.2.14.11.15.8.35.16.2.5.1.12,HPN-ICF-LswQos-MIB::hpnicfPriorityIpPre,INTEGER,read-create,,current,,Set Ip precedence.
.1.3.6.1.4.1.11.2.14.11.15.8.35.16.2.5.1.13,HPN-ICF-LswQos-MIB::hpnicfPriorityIpPreFromCos,INTEGER,read-create,,current,true(1):false(2),Set Ip precedence according to vlan priority.
.1.3.6.1.4.1.11.2.14.11.15.8.35.16.2.5.1.14,HPN-ICF-LswQos-MIB::hpnicfPriorityCos,INTEGER,read-create,,current,,Set vlan priority.
.1.3.6.1.4.1.11.2.14.11.15.8.35.16.2.5.1.15,HPN-ICF-LswQos-MIB::hpnicfPriorityCosFromIpPre,INTEGER,read-create,,current,true(1):false(2),Set vlan priority according to IP precedence.
.1.3.6.1.4.1.11.2.14.11.15.8.35.16.2.5.1.16,HPN-ICF-LswQos-MIB::hpnicfPriorityLocalPre,INTEGER,read-create,,current,,Set local precedence.
.1.3.6.1.4.1.11.2.14.11.15.8.35.16.2.5.1.17,HPN-ICF-LswQos-MIB::hpnicfPriorityPolicedServiceType,INTEGER,read-create,,current,invalid(0):auto(1):trust-dscp(2):new-dscp(3):untrusted(4),The service type of proliced Priority.
.1.3.6.1.4.1.11.2.14.11.15.8.35.16.2.5.1.18,HPN-ICF-LswQos-MIB::hpnicfPriorityPolicedServiceDscp,INTEGER,read-create,,current,,The service Dscp of proliced Priority.
.1.3.6.1.4.1.11.2.14.11.15.8.35.16.2.5.1.19,HPN-ICF-LswQos-MIB::hpnicfPriorityPolicedServiceExp,INTEGER,read-create,,current,,The service Exp of proliced Priority.
.1.3.6.1.4.1.11.2.14.11.15.8.35.16.2.5.1.20,HPN-ICF-LswQos-MIB::hpnicfPriorityPolicedServiceCos,INTEGER,read-create,,current,,The service COS of proliced Priority.
.1.3.6.1.4.1.11.2.14.11.15.8.35.16.2.5.1.21,HPN-ICF-LswQos-MIB::hpnicfPriorityPolicedServiceLoaclPre,INTEGER,read-create,,current,,The service local pre of proliced Priority.
.1.3.6.1.4.1.11.2.14.11.15.8.35.16.2.5.1.22,HPN-ICF-LswQos-MIB::hpnicfPriorityPolicedServiceDropPriority,INTEGER,read-create,,current,,The service drop priority of proliced Priority.
.1.3.6.1.4.1.11.2.14.11.15.8.35.16.2.5.1.23,HPN-ICF-LswQos-MIB::hpnicfPriorityRuntime,INTEGER,read-only,,current,true(1):false(2),Is run or not.
.1.3.6.1.4.1.11.2.14.11.15.8.35.16.2.5.1.24,HPN-ICF-LswQos-MIB::hpnicfPriorityRowStatus,INTEGER,read-create,,current,active(1):notInService(2):notReady(3):createAndGo(4):createAndWait(5):destroy(6),RowStatus, now support three status: createAndGo, active, destroy.
.1.3.6.1.4.1.11.2.14.11.15.8.35.16.2.6,HPN-ICF-LswQos-MIB::hpnicfRedirectTable,,not-accessible,,current,,Redirect table which contains rediect entry.
.1.3.6.1.4.1.11.2.14.11.15.8.35.16.2.6.1,HPN-ICF-LswQos-MIB::hpnicfRedirectEntry,,not-accessible,hpnicfRedirectAclIndex:hpnicfRedirectIfIndex:hpnicfRedirectVlanID:hpnicfRedirectDirection,current,,Configuration information of redirection.
.1.3.6.1.4.1.11.2.14.11.15.8.35.16.2.6.1.1,HPN-ICF-LswQos-MIB::hpnicfRedirectAclIndex,INTEGER,read-create,,current,,Index of acl rule.
.1.3.6.1.4.1.11.2.14.11.15.8.35.16.2.6.1.2,HPN-ICF-LswQos-MIB::hpnicfRedirectIfIndex,INTEGER,read-create,,current,,ifIndex of port.
.1.3.6.1.4.1.11.2.14.11.15.8.35.16.2.6.1.3,HPN-ICF-LswQos-MIB::hpnicfRedirectVlanID,INTEGER,read-create,,current,,Vlan ID.
.1.3.6.1.4.1.11.2.14.11.15.8.35.16.2.6.1.4,HPN-ICF-LswQos-MIB::hpnicfRedirectDirection,INTEGER,read-create,,current,invalid(0):input(1):output(2),Direction of data stream.
.1.3.6.1.4.1.11.2.14.11.15.8.35.16.2.6.1.5,HPN-ICF-LswQos-MIB::hpnicfRedirectUserAclNum,INTEGER,read-create,,current,,The number of the user acl.
.1.3.6.1.4.1.11.2.14.11.15.8.35.16.2.6.1.6,HPN-ICF-LswQos-MIB::hpnicfRedirectUserAclRule,INTEGER,read-create,,current,,The subitem of the user acl.
.1.3.6.1.4.1.11.2.14.11.15.8.35.16.2.6.1.7,HPN-ICF-LswQos-MIB::hpnicfRedirectIpAclNum,INTEGER,read-create,,current,,The num of the IP acl.
.1.3.6.1.4.1.11.2.14.11.15.8.35.16.2.6.1.8,HPN-ICF-LswQos-MIB::hpnicfRedirectIpAclRule,INTEGER,read-create,,current,,The subitem of the IP acl.
.1.3.6.1.4.1.11.2.14.11.15.8.35.16.2.6.1.9,HPN-ICF-LswQos-MIB::hpnicfRedirectLinkAclNum,INTEGER,read-create,,current,,The num of the link acl.
.1.3.6.1.4.1.11.2.14.11.15.8.35.16.2.6.1.10,HPN-ICF-LswQos-MIB::hpnicfRedirectLinkAclRule,INTEGER,read-create,,current,,The subitem of the link acl.
.1.3.6.1.4.1.11.2.14.11.15.8.35.16.2.6.1.11,HPN-ICF-LswQos-MIB::hpnicfRedirectToCpu,INTEGER,read-create,,current,true(1):false(2),Redirect to cpu.
.1.3.6.1.4.1.11.2.14.11.15.8.35.16.2.6.1.12,HPN-ICF-LswQos-MIB::hpnicfRedirectToIfIndex,INTEGER,read-create,,current,,The ifIndex of port to be redirect to.
.1.3.6.1.4.1.11.2.14.11.15.8.35.16.2.6.1.13,HPN-ICF-LswQos-MIB::hpnicfRedirectToNextHop1,IpAddress,read-create,,current,, 
.1.3.6.1.4.1.11.2.14.11.15.8.35.16.2.6.1.14,HPN-ICF-LswQos-MIB::hpnicfRedirectToNextHop2,IpAddress,read-create,,current,, 
.1.3.6.1.4.1.11.2.14.11.15.8.35.16.2.6.1.15,HPN-ICF-LswQos-MIB::hpnicfRedirectRuntime,INTEGER,read-only,,current,true(1):false(2),Is run or not.
.1.3.6.1.4.1.11.2.14.11.15.8.35.16.2.6.1.16,HPN-ICF-LswQos-MIB::hpnicfRedirectRowStatus,INTEGER,read-create,,current,active(1):notInService(2):notReady(3):createAndGo(4):createAndWait(5):destroy(6),RowStatus, now support three status: createAndGo, active, destroy.
.1.3.6.1.4.1.11.2.14.11.15.8.35.16.2.6.1.17,HPN-ICF-LswQos-MIB::hpnicfRedirectToSlotNo,INTEGER,read-create,,current,,The slot number to process redirection. Default value is 15. When L3plus function is not supported, the default value would be set. For L3plus redirection function, it is necessary.
.1.3.6.1.4.1.11.2.14.11.15.8.35.16.2.6.1.18,HPN-ICF-LswQos-MIB::hpnicfRedirectRemarkedDSCP,INTEGER,read-create,,current,,DSCP of Policy-Based Routing. When L3plus function is not supported, the default value would be set. For L3plus redirection function, it is optional.
.1.3.6.1.4.1.11.2.14.11.15.8.35.16.2.6.1.19,HPN-ICF-LswQos-MIB::hpnicfRedirectRemarkedPri,INTEGER,read-create,,current,,The priority of the redirect packet. When L3plus function is not supported, the default value would be set. For L3plus redirection function, it is optional.
.1.3.6.1.4.1.11.2.14.11.15.8.35.16.2.6.1.20,HPN-ICF-LswQos-MIB::hpnicfRedirectRemarkedTos,INTEGER,read-create,,current,,The TOS of the redirect packet. When L3plus function is not supported, the default value would be set. For L3plus redirection function, it is optional.
.1.3.6.1.4.1.11.2.14.11.15.8.35.16.2.6.1.21,HPN-ICF-LswQos-MIB::hpnicfRedirectToNextHop3,IpAddress,read-create,,current,,The third IP address for PBR. Default value is 0xffffffff. When L3plus function is not supported, the default value would be set. The data stream can be redirected to three nexthops at most or one VLAN interface, one nexthop should be set at least if data packets are not redirected to VLAN interface for L3plus redirection function.
.1.3.6.1.4.1.11.2.14.11.15.8.35.16.2.6.1.22,HPN-ICF-LswQos-MIB::hpnicfRedirectTargetVlanID,INTEGER,read-create,,current,,The destination vlan ID for PBR. Default value is 0. When L3plus function is not supported, the default value would be set. For L3plus redirection function, it is necessary when no nexthop is set. 
.1.3.6.1.4.1.11.2.14.11.15.8.35.16.2.6.1.23,HPN-ICF-LswQos-MIB::hpnicfRedirectMode,INTEGER,read-create,,current,strict-priority(1):load-balance(2),The node denotes the strategy adopted by the PBR. If strict-priority is configured, the most preferential IP address is use as redirected nexthop. If the mode is load-balance, any of the three IP addresses will be the nexthop and the traffic distributes in the three direction. Default value is strict-priority. When L3plus function is not supported, the default value would be set. It is optional. 
.1.3.6.1.4.1.11.2.14.11.15.8.35.16.2.6.1.24,HPN-ICF-LswQos-MIB::hpnicfRedirectToNestedVlanID,Integer32,read-create,,current,,The nested vlan ID inserted before the original vlan tag. Default value is 0. When the function is not supported, the default value would be set. It is optional.
.1.3.6.1.4.1.11.2.14.11.15.8.35.16.2.6.1.25,HPN-ICF-LswQos-MIB::hpnicfRedirectToModifiedVlanID,Integer32,read-create,,current,,The new vlan ID replaced the old one. Default value is 0. When the function is not supported, the default value would be set. It is optional.
.1.3.6.1.4.1.11.2.14.11.15.8.35.16.2.7,HPN-ICF-LswQos-MIB::hpnicfStatisticTable,,not-accessible,,current,,Statistic table which contains statistic entry.
.1.3.6.1.4.1.11.2.14.11.15.8.35.16.2.7.1,HPN-ICF-LswQos-MIB::hpnicfStatisticEntry,,not-accessible,hpnicfStatisticAclIndex:hpnicfStatisticIfIndex:hpnicfStatisticVlanID:hpnicfStatisticDirection,current,,Configuration about statistic information.
.1.3.6.1.4.1.11.2.14.11.15.8.35.16.2.7.1.1,HPN-ICF-LswQos-MIB::hpnicfStatisticAclIndex,INTEGER,read-create,,current,,Index of acl rule.
.1.3.6.1.4.1.11.2.14.11.15.8.35.16.2.7.1.2,HPN-ICF-LswQos-MIB::hpnicfStatisticIfIndex,INTEGER,read-create,,current,,ifIndex of port.
.1.3.6.1.4.1.11.2.14.11.15.8.35.16.2.7.1.3,HPN-ICF-LswQos-MIB::hpnicfStatisticVlanID,INTEGER,read-create,,current,,Vlan ID.
.1.3.6.1.4.1.11.2.14.11.15.8.35.16.2.7.1.4,HPN-ICF-LswQos-MIB::hpnicfStatisticDirection,INTEGER,read-create,,current,invalid(0):input(1):output(2),Direction of data stream.
.1.3.6.1.4.1.11.2.14.11.15.8.35.16.2.7.1.5,HPN-ICF-LswQos-MIB::hpnicfStatisticUserAclNum,INTEGER,read-create,,current,,The number of the user acl.
.1.3.6.1.4.1.11.2.14.11.15.8.35.16.2.7.1.6,HPN-ICF-LswQos-MIB::hpnicfStatisticUserAclRule,INTEGER,read-create,,current,,The subitem of the user acl.
.1.3.6.1.4.1.11.2.14.11.15.8.35.16.2.7.1.7,HPN-ICF-LswQos-MIB::hpnicfStatisticIpAclNum,INTEGER,read-create,,current,,The number of the IP acl.
.1.3.6.1.4.1.11.2.14.11.15.8.35.16.2.7.1.8,HPN-ICF-LswQos-MIB::hpnicfStatisticIpAclRule,INTEGER,read-create,,current,,The subitem of the IP acl.
.1.3.6.1.4.1.11.2.14.11.15.8.35.16.2.7.1.9,HPN-ICF-LswQos-MIB::hpnicfStatisticLinkAclNum,INTEGER,read-create,,current,,The number of the link acl.
.1.3.6.1.4.1.11.2.14.11.15.8.35.16.2.7.1.10,HPN-ICF-LswQos-MIB::hpnicfStatisticLinkAclRule,INTEGER,read-create,,current,,The subitem of the link acl.
.1.3.6.1.4.1.11.2.14.11.15.8.35.16.2.7.1.11,HPN-ICF-LswQos-MIB::hpnicfStatisticRuntime,INTEGER,read-only,,current,true(1):false(2),Is run or not.
.1.3.6.1.4.1.11.2.14.11.15.8.35.16.2.7.1.12,HPN-ICF-LswQos-MIB::hpnicfStatisticPacketCount,Counter64,read-only,,current,,The counter of the packets which is matched.
.1.3.6.1.4.1.11.2.14.11.15.8.35.16.2.7.1.13,HPN-ICF-LswQos-MIB::hpnicfStatisticByteCount,Counter64,read-only,,current,,The counter of the byte which is matched.
.1.3.6.1.4.1.11.2.14.11.15.8.35.16.2.7.1.14,HPN-ICF-LswQos-MIB::hpnicfStatisticCountClear,INTEGER,read-write,,current,cleared(1):nouse(2),Clear the counter of the packets.
.1.3.6.1.4.1.11.2.14.11.15.8.35.16.2.7.1.15,HPN-ICF-LswQos-MIB::hpnicfStatisticRowStatus,INTEGER,read-create,,current,active(1):notInService(2):notReady(3):createAndGo(4):createAndWait(5):destroy(6),RowStatus, now support three status: createAndGo, active, destroy.
.1.3.6.1.4.1.11.2.14.11.15.8.35.16.2.7.1.16,HPN-ICF-LswQos-MIB::hpnicfStatisticPacketXCount,Counter64,read-only,,current,,The counter of the outprofile packets.
.1.3.6.1.4.1.11.2.14.11.15.8.35.16.2.7.1.17,HPN-ICF-LswQos-MIB::hpnicfStatisticByteXCount,Counter64,read-only,,current,,The counter of the outprofile bytes.
.1.3.6.1.4.1.11.2.14.11.15.8.35.16.2.8,HPN-ICF-LswQos-MIB::hpnicfMirrorTable,,not-accessible,,current,,Mirror table which contains mirror entry.
.1.3.6.1.4.1.11.2.14.11.15.8.35.16.2.8.1,HPN-ICF-LswQos-MIB::hpnicfMirrorEntry,,not-accessible,hpnicfMirrorAclIndex:hpnicfMirrorIfIndex:hpnicfMirrorVlanID:hpnicfMirrorDirection,current,,Configuration information to be mirrored.
.1.3.6.1.4.1.11.2.14.11.15.8.35.16.2.8.1.1,HPN-ICF-LswQos-MIB::hpnicfMirrorAclIndex,INTEGER,read-create,,current,,Index of acl rule.
.1.3.6.1.4.1.11.2.14.11.15.8.35.16.2.8.1.2,HPN-ICF-LswQos-MIB::hpnicfMirrorIfIndex,INTEGER,read-create,,current,,ifIndex of port.
.1.3.6.1.4.1.11.2.14.11.15.8.35.16.2.8.1.3,HPN-ICF-LswQos-MIB::hpnicfMirrorVlanID,INTEGER,read-create,,current,,Vlan ID.
.1.3.6.1.4.1.11.2.14.11.15.8.35.16.2.8.1.4,HPN-ICF-LswQos-MIB::hpnicfMirrorDirection,INTEGER,read-create,,current,invalid(0):input(1):output(2),Direction of data stream.
.1.3.6.1.4.1.11.2.14.11.15.8.35.16.2.8.1.5,HPN-ICF-LswQos-MIB::hpnicfMirrorUserAclNum,INTEGER,read-create,,current,,The number of the user acl.
.1.3.6.1.4.1.11.2.14.11.15.8.35.16.2.8.1.6,HPN-ICF-LswQos-MIB::hpnicfMirrorUserAclRule,INTEGER,read-create,,current,,The subitem of the user acl.
.1.3.6.1.4.1.11.2.14.11.15.8.35.16.2.8.1.7,HPN-ICF-LswQos-MIB::hpnicfMirrorIpAclNum,INTEGER,read-create,,current,,The subitem of the user acl.
.1.3.6.1.4.1.11.2.14.11.15.8.35.16.2.8.1.8,HPN-ICF-LswQos-MIB::hpnicfMirrorIpAclRule,INTEGER,read-create,,current,,The subitem of the IP acl.
.1.3.6.1.4.1.11.2.14.11.15.8.35.16.2.8.1.9,HPN-ICF-LswQos-MIB::hpnicfMirrorLinkAclNum,INTEGER,read-create,,current,,The number of the link acl.
.1.3.6.1.4.1.11.2.14.11.15.8.35.16.2.8.1.10,HPN-ICF-LswQos-MIB::hpnicfMirrorLinkAclRule,INTEGER,read-create,,current,,The subitem of the link acl.
.1.3.6.1.4.1.11.2.14.11.15.8.35.16.2.8.1.11,HPN-ICF-LswQos-MIB::hpnicfMirrorToIfIndex,INTEGER,read-create,,current,,The ifIndex of port that to be mirrored to.
.1.3.6.1.4.1.11.2.14.11.15.8.35.16.2.8.1.12,HPN-ICF-LswQos-MIB::hpnicfMirrorToCpu,INTEGER,read-create,,current,true(1):false(2),Mirror to cpu.
.1.3.6.1.4.1.11.2.14.11.15.8.35.16.2.8.1.13,HPN-ICF-LswQos-MIB::hpnicfMirrorRuntime,INTEGER,read-only,,current,true(1):false(2),Is run or not.
.1.3.6.1.4.1.11.2.14.11.15.8.35.16.2.8.1.14,HPN-ICF-LswQos-MIB::hpnicfMirrorRowStatus,INTEGER,read-create,,current,active(1):notInService(2):notReady(3):createAndGo(4):createAndWait(5):destroy(6),RowStatus, now support three status: createAndGo, active, destroy. 
.1.3.6.1.4.1.11.2.14.11.15.8.35.16.2.8.1.15,HPN-ICF-LswQos-MIB::hpnicfMirrorToGroup,Integer32,read-create,,current,,The destination of stream-based mirroring is the mirroring group.
.1.3.6.1.4.1.11.2.14.11.15.8.35.16.2.9,HPN-ICF-LswQos-MIB::hpnicfPortMirrorTable,,not-accessible,,current,,Port Mirror.
.1.3.6.1.4.1.11.2.14.11.15.8.35.16.2.9.1,HPN-ICF-LswQos-MIB::hpnicfPortMirrorEntry,,not-accessible,hpnicfPortMirrorIfIndex,current,,Configuration information of port mirroring.
.1.3.6.1.4.1.11.2.14.11.15.8.35.16.2.9.1.1,HPN-ICF-LswQos-MIB::hpnicfPortMirrorIfIndex,INTEGER,read-create,,current,,The ifIndex of mirror port.
.1.3.6.1.4.1.11.2.14.11.15.8.35.16.2.9.1.2,HPN-ICF-LswQos-MIB::hpnicfPortMirrorDirection,INTEGER,read-create,,current,in(1):out(2):both(3),The direction of mirror port.
.1.3.6.1.4.1.11.2.14.11.15.8.35.16.2.9.1.3,HPN-ICF-LswQos-MIB::hpnicfPortMirrorRowStatus,INTEGER,read-create,,current,active(1):notInService(2):notReady(3):createAndGo(4):createAndWait(5):destroy(6),RowStatus, now support three status: createAndGo, active, destroy.
.1.3.6.1.4.1.11.2.14.11.15.8.35.16.2.10,HPN-ICF-LswQos-MIB::hpnicfLineRateTable,,not-accessible,,current,,Line Rate.
.1.3.6.1.4.1.11.2.14.11.15.8.35.16.2.10.1,HPN-ICF-LswQos-MIB::hpnicfLineRateEntry,,not-accessible,hpnicfLineRateIfIndex:hpnicfLineRateDirection,current,,Configuration information of line-rate port.
.1.3.6.1.4.1.11.2.14.11.15.8.35.16.2.10.1.1,HPN-ICF-LswQos-MIB::hpnicfLineRateIfIndex,INTEGER,read-create,,current,,The ifIndex of port of line rate.
.1.3.6.1.4.1.11.2.14.11.15.8.35.16.2.10.1.2,HPN-ICF-LswQos-MIB::hpnicfLineRateDirection,INTEGER,read-create,,current,in(1):out(2),The direction of line rate.
.1.3.6.1.4.1.11.2.14.11.15.8.35.16.2.10.1.3,HPN-ICF-LswQos-MIB::hpnicfLineRateValue,INTEGER,read-create,,current,,The value of the line-rate.
.1.3.6.1.4.1.11.2.14.11.15.8.35.16.2.10.1.4,HPN-ICF-LswQos-MIB::hpnicfLineRateRowStatus,INTEGER,read-create,,current,active(1):notInService(2):notReady(3):createAndGo(4):createAndWait(5):destroy(6),RowStatus, now support three status: createAndGo, active, destroy.
.1.3.6.1.4.1.11.2.14.11.15.8.35.16.2.11,HPN-ICF-LswQos-MIB::hpnicfBandwidthTable,,not-accessible,,current,,Bandwidth.
.1.3.6.1.4.1.11.2.14.11.15.8.35.16.2.11.1,HPN-ICF-LswQos-MIB::hpnicfBandwidthEntry,,not-accessible,hpnicfBandwidthAclIndex:hpnicfBandwidthIfIndex:hpnicfBandwidthVlanID:hpnicfBandwidthDirection,current,,Configuration information of bandwidth of port.
.1.3.6.1.4.1.11.2.14.11.15.8.35.16.2.11.1.1,HPN-ICF-LswQos-MIB::hpnicfBandwidthAclIndex,INTEGER,read-create,,current,,Index of acl rule.
.1.3.6.1.4.1.11.2.14.11.15.8.35.16.2.11.1.2,HPN-ICF-LswQos-MIB::hpnicfBandwidthIfIndex,INTEGER,read-create,,current,,ifIndex of port.
.1.3.6.1.4.1.11.2.14.11.15.8.35.16.2.11.1.3,HPN-ICF-LswQos-MIB::hpnicfBandwidthVlanID,INTEGER,read-create,,current,,Vlan ID.
.1.3.6.1.4.1.11.2.14.11.15.8.35.16.2.11.1.4,HPN-ICF-LswQos-MIB::hpnicfBandwidthDirection,INTEGER,read-create,,current,invalid(0):output(2),Direction of data stream.
.1.3.6.1.4.1.11.2.14.11.15.8.35.16.2.11.1.5,HPN-ICF-LswQos-MIB::hpnicfBandwidthIpAclNum,INTEGER,read-create,,current,,The number of Ip acl.
.1.3.6.1.4.1.11.2.14.11.15.8.35.16.2.11.1.6,HPN-ICF-LswQos-MIB::hpnicfBandwidthIpAclRule,INTEGER,read-create,,current,,The subitem of ip acl.
.1.3.6.1.4.1.11.2.14.11.15.8.35.16.2.11.1.7,HPN-ICF-LswQos-MIB::hpnicfBandwidthLinkAclNum,INTEGER,read-create,,current,,The number of link acl.
.1.3.6.1.4.1.11.2.14.11.15.8.35.16.2.11.1.8,HPN-ICF-LswQos-MIB::hpnicfBandwidthLinkAclRule,INTEGER,read-create,,current,,The subitem of link acl.
.1.3.6.1.4.1.11.2.14.11.15.8.35.16.2.11.1.9,HPN-ICF-LswQos-MIB::hpnicfBandwidthMinGuaranteedWidth,INTEGER,read-write,,current,,The min width which is guaranteed.
.1.3.6.1.4.1.11.2.14.11.15.8.35.16.2.11.1.10,HPN-ICF-LswQos-MIB::hpnicfBandwidthMaxGuaranteedWidth,INTEGER,read-write,,current,,The max width which is guaranteed.
.1.3.6.1.4.1.11.2.14.11.15.8.35.16.2.11.1.11,HPN-ICF-LswQos-MIB::hpnicfBandwidthWeight,INTEGER,read-write,,current,,Weight of bandwidth.
.1.3.6.1.4.1.11.2.14.11.15.8.35.16.2.11.1.12,HPN-ICF-LswQos-MIB::hpnicfBandwidthRuntime,INTEGER,read-only,,current,true(1):false(2),Is run or not.
.1.3.6.1.4.1.11.2.14.11.15.8.35.16.2.11.1.13,HPN-ICF-LswQos-MIB::hpnicfBandwidthRowStatus,INTEGER,read-write,,current,active(1):notInService(2):notReady(3):createAndGo(4):createAndWait(5):destroy(6),RowStatus, now support three status: createAndGo, active, destroy.
.1.3.6.1.4.1.11.2.14.11.15.8.35.16.2.12,HPN-ICF-LswQos-MIB::hpnicfRedTable,,not-accessible,,current,,Red table which contains RED entry.
.1.3.6.1.4.1.11.2.14.11.15.8.35.16.2.12.1,HPN-ICF-LswQos-MIB::hpnicfRedEntry,,not-accessible,hpnicfRedAclIndex:hpnicfRedIfIndex:hpnicfRedVlanID:hpnicfRedDirection,current,,Configuration information of RED.
.1.3.6.1.4.1.11.2.14.11.15.8.35.16.2.12.1.1,HPN-ICF-LswQos-MIB::hpnicfRedAclIndex,INTEGER,read-create,,current,,Index of acl rule.
.1.3.6.1.4.1.11.2.14.11.15.8.35.16.2.12.1.2,HPN-ICF-LswQos-MIB::hpnicfRedIfIndex,INTEGER,read-create,,current,,ifIndex of port.
.1.3.6.1.4.1.11.2.14.11.15.8.35.16.2.12.1.3,HPN-ICF-LswQos-MIB::hpnicfRedVlanID,INTEGER,read-create,,current,,Vlan ID.
.1.3.6.1.4.1.11.2.14.11.15.8.35.16.2.12.1.4,HPN-ICF-LswQos-MIB::hpnicfRedDirection,INTEGER,read-create,,current,invalid(0):output(2),Direction of data stream.
.1.3.6.1.4.1.11.2.14.11.15.8.35.16.2.12.1.5,HPN-ICF-LswQos-MIB::hpnicfRedIpAclNum,INTEGER,read-create,,current,,The num of Ip acl.
.1.3.6.1.4.1.11.2.14.11.15.8.35.16.2.12.1.6,HPN-ICF-LswQos-MIB::hpnicfRedIpAclRule,INTEGER,read-create,,current,,The subitem of Ip acl.
.1.3.6.1.4.1.11.2.14.11.15.8.35.16.2.12.1.7,HPN-ICF-LswQos-MIB::hpnicfRedLinkAclNum,INTEGER,read-create,,current,,The number of link acl.
.1.3.6.1.4.1.11.2.14.11.15.8.35.16.2.12.1.8,HPN-ICF-LswQos-MIB::hpnicfRedLinkAclRule,INTEGER,read-create,,current,,The subitem of link acl.
.1.3.6.1.4.1.11.2.14.11.15.8.35.16.2.12.1.9,HPN-ICF-LswQos-MIB::hpnicfRedStartQueueLen,INTEGER,read-write,,current,,The length of Starting queue.
.1.3.6.1.4.1.11.2.14.11.15.8.35.16.2.12.1.10,HPN-ICF-LswQos-MIB::hpnicfRedStopQueueLen,INTEGER,read-write,,current,,The length of stopping queue.
.1.3.6.1.4.1.11.2.14.11.15.8.35.16.2.12.1.11,HPN-ICF-LswQos-MIB::hpnicfRedProbability,INTEGER,read-write,,current,,Probability.
.1.3.6.1.4.1.11.2.14.11.15.8.35.16.2.12.1.12,HPN-ICF-LswQos-MIB::hpnicfRedRuntime,INTEGER,read-only,,current,true(1):false(2),Is run or not.
.1.3.6.1.4.1.11.2.14.11.15.8.35.16.2.12.1.13,HPN-ICF-LswQos-MIB::hpnicfRedRowStatus,INTEGER,read-write,,current,active(1):notInService(2):notReady(3):createAndGo(4):createAndWait(5):destroy(6),RowStatus, now support three status: createAndGo, active, destroy.
.1.3.6.1.4.1.11.2.14.11.15.8.35.16.2.13,HPN-ICF-LswQos-MIB::hpnicfMirrorGroupTable,,not-accessible,,current,,Mirror Group.
.1.3.6.1.4.1.11.2.14.11.15.8.35.16.2.13.1,HPN-ICF-LswQos-MIB::hpnicfMirrorGroupEntry,,not-accessible,hpnicfMirrorGroupID,current,,Configuration information of mirroring group.
.1.3.6.1.4.1.11.2.14.11.15.8.35.16.2.13.1.1,HPN-ICF-LswQos-MIB::hpnicfMirrorGroupID,INTEGER,read-only,,current,,Group ID of mirroring group.
.1.3.6.1.4.1.11.2.14.11.15.8.35.16.2.13.1.2,HPN-ICF-LswQos-MIB::hpnicfMirrorGroupDirection,INTEGER,read-write,,current,input(1):output(2),Direction of data stream which would be mirrored.
.1.3.6.1.4.1.11.2.14.11.15.8.35.16.2.13.1.3,HPN-ICF-LswQos-MIB::hpnicfMirrorGroupMirrorIfIndexList,OCTET,read-write,,current,,ifIndex list of source port.
.1.3.6.1.4.1.11.2.14.11.15.8.35.16.2.13.1.4,HPN-ICF-LswQos-MIB::hpnicfMirrorGroupMonitorIfIndex,INTEGER,read-write,,current,,ifIndex of destination port.
.1.3.6.1.4.1.11.2.14.11.15.8.35.16.2.13.1.5,HPN-ICF-LswQos-MIB::hpnicfMirrorGroupRowStatus,INTEGER,read-write,,current,active(1):notInService(2):notReady(3):createAndGo(4):createAndWait(5):destroy(6),RowStatus, now support three status: createAndGo, active, destroy.
.1.3.6.1.4.1.11.2.14.11.15.8.35.16.2.14,HPN-ICF-LswQos-MIB::hpnicfFlowtempTable,,not-accessible,,current,,Flow-template table which contains flow-template entry.
.1.3.6.1.4.1.11.2.14.11.15.8.35.16.2.14.1,HPN-ICF-LswQos-MIB::hpnicfFlowtempEntry,,not-accessible,hpnicfFlowtempIndex,current,,Configuration information of flow-template.
.1.3.6.1.4.1.11.2.14.11.15.8.35.16.2.14.1.1,HPN-ICF-LswQos-MIB::hpnicfFlowtempIndex,INTEGER,read-only,,current,default(1):user-defined(2),Index of flow template.
.1.3.6.1.4.1.11.2.14.11.15.8.35.16.2.14.1.2,HPN-ICF-LswQos-MIB::hpnicfFlowtempIpProtocol,INTEGER,read-create,,current,true(1):false(2),protocol-type of IP packet.
.1.3.6.1.4.1.11.2.14.11.15.8.35.16.2.14.1.3,HPN-ICF-LswQos-MIB::hpnicfFlowtempTcpFlag,INTEGER,read-create,,current,true(1):false(2),The flag of Tcp paceket. 
.1.3.6.1.4.1.11.2.14.11.15.8.35.16.2.14.1.4,HPN-ICF-LswQos-MIB::hpnicfFlowtempSPort,INTEGER,read-create,,current,true(1):false(2),The port of source.
.1.3.6.1.4.1.11.2.14.11.15.8.35.16.2.14.1.5,HPN-ICF-LswQos-MIB::hpnicfFlowtempDPort,INTEGER,read-create,,current,true(1):false(2),The port of destination.
.1.3.6.1.4.1.11.2.14.11.15.8.35.16.2.14.1.6,HPN-ICF-LswQos-MIB::hpnicfFlowtempIcmpType,INTEGER,read-create,,current,true(1):false(2),The type of Icmp.
.1.3.6.1.4.1.11.2.14.11.15.8.35.16.2.14.1.7,HPN-ICF-LswQos-MIB::hpnicfFlowtempIcmpCode,INTEGER,read-create,,current,true(1):false(2),The code of Icmp.
.1.3.6.1.4.1.11.2.14.11.15.8.35.16.2.14.1.8,HPN-ICF-LswQos-MIB::hpnicfFlowtempFragment,INTEGER,read-create,,current,true(1):false(2),The flag of Fragment. 
.1.3.6.1.4.1.11.2.14.11.15.8.35.16.2.14.1.9,HPN-ICF-LswQos-MIB::hpnicfFlowtempDscp,INTEGER,read-create,,current,true(1):false(2),Dscp of IP packet.
.1.3.6.1.4.1.11.2.14.11.15.8.35.16.2.14.1.10,HPN-ICF-LswQos-MIB::hpnicfFlowtempIpPre,INTEGER,read-create,,current,true(1):false(2),The Precedence of Ip packet. 
.1.3.6.1.4.1.11.2.14.11.15.8.35.16.2.14.1.11,HPN-ICF-LswQos-MIB::hpnicfFlowtempTos,INTEGER,read-create,,current,true(1):false(2),Tos of IP packet.
.1.3.6.1.4.1.11.2.14.11.15.8.35.16.2.14.1.12,HPN-ICF-LswQos-MIB::hpnicfFlowtempSIp,INTEGER,read-create,,current,true(1):false(2),The Ip of source.
.1.3.6.1.4.1.11.2.14.11.15.8.35.16.2.14.1.13,HPN-ICF-LswQos-MIB::hpnicfFlowtempSIpMask,IpAddress,read-create,,current,,The mask of source-Ip.
.1.3.6.1.4.1.11.2.14.11.15.8.35.16.2.14.1.14,HPN-ICF-LswQos-MIB::hpnicfFlowtempDIp,INTEGER,read-create,,current,true(1):false(2),The Ip of destination.
.1.3.6.1.4.1.11.2.14.11.15.8.35.16.2.14.1.15,HPN-ICF-LswQos-MIB::hpnicfFlowtempDIpMask,IpAddress,read-create,,current,,The mask of destination-Ip.
.1.3.6.1.4.1.11.2.14.11.15.8.35.16.2.14.1.16,HPN-ICF-LswQos-MIB::hpnicfFlowtempEthProtocol,INTEGER,read-create,,current,true(1):false(2),Protocol type of Ethernet.
.1.3.6.1.4.1.11.2.14.11.15.8.35.16.2.14.1.17,HPN-ICF-LswQos-MIB::hpnicfFlowtempSMac,INTEGER,read-create,,current,true(1):false(2),The Mac of source.
.1.3.6.1.4.1.11.2.14.11.15.8.35.16.2.14.1.18,HPN-ICF-LswQos-MIB::hpnicfFlowtempSMacMask,OCTET,read-create,,current,,The mask of source-Mac.
.1.3.6.1.4.1.11.2.14.11.15.8.35.16.2.14.1.19,HPN-ICF-LswQos-MIB::hpnicfFlowtempDMac,INTEGER,read-create,,current,true(1):false(2),The mac of destination.
.1.3.6.1.4.1.11.2.14.11.15.8.35.16.2.14.1.20,HPN-ICF-LswQos-MIB::hpnicfFlowtempDMacMask,OCTET,read-create,,current,,The mask of destination-Mac.
.1.3.6.1.4.1.11.2.14.11.15.8.35.16.2.14.1.21,HPN-ICF-LswQos-MIB::hpnicfFlowtempVpn,INTEGER,read-create,,current,true(1):false(2),Vpn
.1.3.6.1.4.1.11.2.14.11.15.8.35.16.2.14.1.22,HPN-ICF-LswQos-MIB::hpnicfFlowtempRowStatus,INTEGER,read-create,,current,active(1):notInService(2):notReady(3):createAndGo(4):createAndWait(5):destroy(6),RowStatus, now support three status: createAndGo, active, destroy.
.1.3.6.1.4.1.11.2.14.11.15.8.35.16.2.14.1.23,HPN-ICF-LswQos-MIB::hpnicfFlowtempVlanId,INTEGER,read-create,,current,true(1):false(2),Source VLAN ID.
.1.3.6.1.4.1.11.2.14.11.15.8.35.16.2.14.1.24,HPN-ICF-LswQos-MIB::hpnicfFlowtempCos,INTEGER,read-create,,current,true(1):false(2),802.1P priority.
.1.3.6.1.4.1.11.2.14.11.15.8.35.16.2.15,HPN-ICF-LswQos-MIB::hpnicfFlowtempEnableTable,,not-accessible,,current,,The table of flow-template.
.1.3.6.1.4.1.11.2.14.11.15.8.35.16.2.15.1,HPN-ICF-LswQos-MIB::hpnicfFlowtempEnableEntry,,not-accessible,hpnicfFlowtempEnableIfIndex:hpnicfFlowtempEnableVlanID,current,,Enable entry of flow-template.
.1.3.6.1.4.1.11.2.14.11.15.8.35.16.2.15.1.1,HPN-ICF-LswQos-MIB::hpnicfFlowtempEnableIfIndex,INTEGER,read-create,,current,,ifIndex of port.
.1.3.6.1.4.1.11.2.14.11.15.8.35.16.2.15.1.2,HPN-ICF-LswQos-MIB::hpnicfFlowtempEnableVlanID,INTEGER,read-create,,current,,Vlan ID.
.1.3.6.1.4.1.11.2.14.11.15.8.35.16.2.15.1.3,HPN-ICF-LswQos-MIB::hpnicfFlowtempEnableFlowtempIndex,INTEGER,read-write,,current,default(1):user-defined(2),The index of Flowtemp table.
.1.3.6.1.4.1.11.2.14.11.15.8.35.16.2.16,HPN-ICF-LswQos-MIB::hpnicfTrafficShapeTable,,not-accessible,,current,,The traffic-shape table which contains traffic-shape entry.
.1.3.6.1.4.1.11.2.14.11.15.8.35.16.2.16.1,HPN-ICF-LswQos-MIB::hpnicfTrafficShapeEntry,,not-accessible,hpnicfTrafficShapeIfIndex:hpnicfTrafficShapeQueueId,current,,Configuration information of traffic-shape.
.1.3.6.1.4.1.11.2.14.11.15.8.35.16.2.16.1.1,HPN-ICF-LswQos-MIB::hpnicfTrafficShapeIfIndex,INTEGER,read-create,,current,,IfIdex of port.
.1.3.6.1.4.1.11.2.14.11.15.8.35.16.2.16.1.2,HPN-ICF-LswQos-MIB::hpnicfTrafficShapeQueueId,INTEGER,read-create,,current,,ID of queue which would be shaped.
.1.3.6.1.4.1.11.2.14.11.15.8.35.16.2.16.1.3,HPN-ICF-LswQos-MIB::hpnicfTrafficShapeMaxRate,INTEGER,read-create,,current,,The max rate.
.1.3.6.1.4.1.11.2.14.11.15.8.35.16.2.16.1.4,HPN-ICF-LswQos-MIB::hpnicfTrafficShapeBurstSize,INTEGER,read-create,,current,,The size of burst.
.1.3.6.1.4.1.11.2.14.11.15.8.35.16.2.16.1.5,HPN-ICF-LswQos-MIB::hpnicfTrafficShapeBufferLimit,INTEGER,read-create,,current,,The limit of buffer.
.1.3.6.1.4.1.11.2.14.11.15.8.35.16.2.16.1.6,HPN-ICF-LswQos-MIB::hpnicfTrafficShapeRowStatus,INTEGER,read-create,,current,active(1):notInService(2):notReady(3):createAndGo(4):createAndWait(5):destroy(6),RowStatus, now support three status: createAndGo, active, destroy.
.1.3.6.1.4.1.11.2.14.11.15.8.35.16.2.17,HPN-ICF-LswQos-MIB::hpnicfPortQueueTable,,not-accessible,,current,,The port-queue table which contains port-queue entry.
.1.3.6.1.4.1.11.2.14.11.15.8.35.16.2.17.1,HPN-ICF-LswQos-MIB::hpnicfPortQueueEntry,,not-accessible,hpnicfPortQueueIfIndex:hpnicfPortQueueQueueID,current,,Configuration information of port-queue.
.1.3.6.1.4.1.11.2.14.11.15.8.35.16.2.17.1.1,HPN-ICF-LswQos-MIB::hpnicfPortQueueIfIndex,INTEGER,read-only,,current,,ifIndex of port.
.1.3.6.1.4.1.11.2.14.11.15.8.35.16.2.17.1.2,HPN-ICF-LswQos-MIB::hpnicfPortQueueQueueID,INTEGER,read-only,,current,,ID of port-queue.
.1.3.6.1.4.1.11.2.14.11.15.8.35.16.2.17.1.3,HPN-ICF-LswQos-MIB::hpnicfPortQueueWrrPriority,INTEGER,read-write,,current,sp(1):wrr-high-priority(2):wrr-low-priority(3),The priority of Wrr.
.1.3.6.1.4.1.11.2.14.11.15.8.35.16.2.17.1.4,HPN-ICF-LswQos-MIB::hpnicfPortQueueWeight,INTEGER,read-write,,current,,The weight of this queue.
.1.3.6.1.4.1.11.2.14.11.15.8.35.16.2.18,HPN-ICF-LswQos-MIB::hpnicfDropModeTable,,not-accessible,,current,,The drop-mode table which contains drop-mode entry.
.1.3.6.1.4.1.11.2.14.11.15.8.35.16.2.18.1,HPN-ICF-LswQos-MIB::hpnicfDropModeEntry,,not-accessible,hpnicfDropModeIfIndex,current,,Configuration information of the drop-mode.
.1.3.6.1.4.1.11.2.14.11.15.8.35.16.2.18.1.1,HPN-ICF-LswQos-MIB::hpnicfDropModeIfIndex,INTEGER,read-only,,current,,ifIndex of port.
.1.3.6.1.4.1.11.2.14.11.15.8.35.16.2.18.1.2,HPN-ICF-LswQos-MIB::hpnicfDropModeMode,INTEGER,read-write,,current,random-detect(1):tail-drop(2),Mode.
.1.3.6.1.4.1.11.2.14.11.15.8.35.16.2.18.1.3,HPN-ICF-LswQos-MIB::hpnicfDropModeWredIndex,INTEGER,read-write,,current,,The index of Wred table.
.1.3.6.1.4.1.11.2.14.11.15.8.35.16.2.19,HPN-ICF-LswQos-MIB::hpnicfWredTable,,not-accessible,,current,,The Wred table which contains wred Entry.
.1.3.6.1.4.1.11.2.14.11.15.8.35.16.2.19.1,HPN-ICF-LswQos-MIB::hpnicfWredEntry,,not-accessible,hpnicfWredIndex:hpnicfWredQueueId,current,,Configuration information of Wred.
.1.3.6.1.4.1.11.2.14.11.15.8.35.16.2.19.1.1,HPN-ICF-LswQos-MIB::hpnicfWredIndex,INTEGER,read-only,,current,,Index of wred.
.1.3.6.1.4.1.11.2.14.11.15.8.35.16.2.19.1.2,HPN-ICF-LswQos-MIB::hpnicfWredQueueId,INTEGER,read-only,,current,,Queue ID.
.1.3.6.1.4.1.11.2.14.11.15.8.35.16.2.19.1.3,HPN-ICF-LswQos-MIB::hpnicfWredGreenMinThreshold,INTEGER,read-write,,current,,The min threshold of Green.
.1.3.6.1.4.1.11.2.14.11.15.8.35.16.2.19.1.4,HPN-ICF-LswQos-MIB::hpnicfWredGreenMaxThreshold,INTEGER,read-write,,current,,The max threshold of Greem.
.1.3.6.1.4.1.11.2.14.11.15.8.35.16.2.19.1.5,HPN-ICF-LswQos-MIB::hpnicfWredGreenMaxProb,INTEGER,read-write,,current,,The max prob of Green.
.1.3.6.1.4.1.11.2.14.11.15.8.35.16.2.19.1.6,HPN-ICF-LswQos-MIB::hpnicfWredYellowMinThreshold,INTEGER,read-write,,current,,The min threshold of Yellow.
.1.3.6.1.4.1.11.2.14.11.15.8.35.16.2.19.1.7,HPN-ICF-LswQos-MIB::hpnicfWredYellowMaxThreshold,INTEGER,read-write,,current,,The max threshold of Yellow.
.1.3.6.1.4.1.11.2.14.11.15.8.35.16.2.19.1.8,HPN-ICF-LswQos-MIB::hpnicfWredYellowMaxProb,INTEGER,read-write,,current,,The Prob threshold of Yellow.
.1.3.6.1.4.1.11.2.14.11.15.8.35.16.2.19.1.9,HPN-ICF-LswQos-MIB::hpnicfWredRedMinThreshold,INTEGER,read-write,,current,,The min threshold of Red.
.1.3.6.1.4.1.11.2.14.11.15.8.35.16.2.19.1.10,HPN-ICF-LswQos-MIB::hpnicfWredRedMaxThreshold,INTEGER,read-write,,current,,The max threshold of Red.
.1.3.6.1.4.1.11.2.14.11.15.8.35.16.2.19.1.11,HPN-ICF-LswQos-MIB::hpnicfWredRedMaxProb,INTEGER,read-write,,current,,The max prob of Red.
.1.3.6.1.4.1.11.2.14.11.15.8.35.16.2.19.1.12,HPN-ICF-LswQos-MIB::hpnicfWredExponent,INTEGER,read-write,,current,,Exponent.
.1.3.6.1.4.1.11.2.14.11.15.8.35.16.2.20,HPN-ICF-LswQos-MIB::hpnicfCosToLocalPrecedenceMapTable,,not-accessible,,current,,Table of map of the COS to local-precedence.
.1.3.6.1.4.1.11.2.14.11.15.8.35.16.2.20.1,HPN-ICF-LswQos-MIB::hpnicfCosToLocalPrecedenceMapEntry,,not-accessible,hpnicfCosToLocalPrecedenceMapCosIndex,current,,Configuration information of map of the COS to local precedence.
.1.3.6.1.4.1.11.2.14.11.15.8.35.16.2.20.1.1,HPN-ICF-LswQos-MIB::hpnicfCosToLocalPrecedenceMapCosIndex,INTEGER,read-only,,current,,Index of the map.
.1.3.6.1.4.1.11.2.14.11.15.8.35.16.2.20.1.2,HPN-ICF-LswQos-MIB::hpnicfCosToLocalPrecedenceMapLocalPrecedenceValue,INTEGER,read-write,,current,,Value of local precedence.
.1.3.6.1.4.1.11.2.14.11.15.8.35.16.2.21,HPN-ICF-LswQos-MIB::hpnicfCosToDropPrecedenceMapTable,,not-accessible,,current,,The table of map of COS to drop-precedence.
.1.3.6.1.4.1.11.2.14.11.15.8.35.16.2.21.1,HPN-ICF-LswQos-MIB::hpnicfCosToDropPrecedenceMapEntry,,not-accessible,hpnicfCosToDropPrecedenceMapCosIndex,current,,Configuration information of the map of the COS to drop-precedence.
.1.3.6.1.4.1.11.2.14.11.15.8.35.16.2.21.1.1,HPN-ICF-LswQos-MIB::hpnicfCosToDropPrecedenceMapCosIndex,INTEGER,read-only,,current,,Index of the map.
.1.3.6.1.4.1.11.2.14.11.15.8.35.16.2.21.1.2,HPN-ICF-LswQos-MIB::hpnicfCosToDropPrecedenceMapDropPrecedenceValue,INTEGER,read-write,,current,,Value of drop-precedence.
.1.3.6.1.4.1.11.2.14.11.15.8.35.16.2.22,HPN-ICF-LswQos-MIB::hpnicfDscpMapTable,,not-accessible,,current,,Table of dscp map.
.1.3.6.1.4.1.11.2.14.11.15.8.35.16.2.22.1,HPN-ICF-LswQos-MIB::hpnicfDscpMapEntry,,not-accessible,hpnicfDscpMapConformLevel:hpnicfDscpMapDscpIndex,current,,Configuration information of Dscp map.
.1.3.6.1.4.1.11.2.14.11.15.8.35.16.2.22.1.1,HPN-ICF-LswQos-MIB::hpnicfDscpMapConformLevel,INTEGER,read-only,,current,,Conformable level of Dscp-map.
.1.3.6.1.4.1.11.2.14.11.15.8.35.16.2.22.1.2,HPN-ICF-LswQos-MIB::hpnicfDscpMapDscpIndex,INTEGER,read-only,,current,,Index of dscp.
.1.3.6.1.4.1.11.2.14.11.15.8.35.16.2.22.1.3,HPN-ICF-LswQos-MIB::hpnicfDscpMapDscpValue,INTEGER,read-write,,current,,Value of Dscp.
.1.3.6.1.4.1.11.2.14.11.15.8.35.16.2.22.1.4,HPN-ICF-LswQos-MIB::hpnicfDscpMapExpValue,INTEGER,read-write,,current,,Exp value.
.1.3.6.1.4.1.11.2.14.11.15.8.35.16.2.22.1.5,HPN-ICF-LswQos-MIB::hpnicfDscpMapCosValue,INTEGER,read-write,,current,,COS value.
.1.3.6.1.4.1.11.2.14.11.15.8.35.16.2.22.1.6,HPN-ICF-LswQos-MIB::hpnicfDscpMapLocalPrecedence,INTEGER,read-write,,current,,The precedence of local.
.1.3.6.1.4.1.11.2.14.11.15.8.35.16.2.22.1.7,HPN-ICF-LswQos-MIB::hpnicfDscpMapDropPrecedence,INTEGER,read-write,,current,,The precedence of Drop.
.1.3.6.1.4.1.11.2.14.11.15.8.35.16.2.23,HPN-ICF-LswQos-MIB::hpnicfExpMapTable,,not-accessible,,current,,The table of Exp-map
.1.3.6.1.4.1.11.2.14.11.15.8.35.16.2.23.1,HPN-ICF-LswQos-MIB::hpnicfExpMapEntry,,not-accessible,hpnicfExpMapConformLevel:hpnicfExpMapExpIndex,current,,Configuration information of Exp-map.
.1.3.6.1.4.1.11.2.14.11.15.8.35.16.2.23.1.1,HPN-ICF-LswQos-MIB::hpnicfExpMapConformLevel,INTEGER,read-only,,current,,Conformable level of Exp-map.
.1.3.6.1.4.1.11.2.14.11.15.8.35.16.2.23.1.2,HPN-ICF-LswQos-MIB::hpnicfExpMapExpIndex,INTEGER,read-only,,current,,Index of Exp.
.1.3.6.1.4.1.11.2.14.11.15.8.35.16.2.23.1.3,HPN-ICF-LswQos-MIB::hpnicfExpMapDscpValue,INTEGER,read-write,,current,,Dscp value.
.1.3.6.1.4.1.11.2.14.11.15.8.35.16.2.23.1.4,HPN-ICF-LswQos-MIB::hpnicfExpMapExpValue,INTEGER,read-write,,current,,Exp value.
.1.3.6.1.4.1.11.2.14.11.15.8.35.16.2.23.1.5,HPN-ICF-LswQos-MIB::hpnicfExpMapCosValue,INTEGER,read-write,,current,,COS Value.
.1.3.6.1.4.1.11.2.14.11.15.8.35.16.2.23.1.6,HPN-ICF-LswQos-MIB::hpnicfExpMapLocalPrecedence,INTEGER,read-write,,current,,The precedence of local.
.1.3.6.1.4.1.11.2.14.11.15.8.35.16.2.23.1.7,HPN-ICF-LswQos-MIB::hpnicfExpMapDropPrecedence,INTEGER,read-write,,current,,The precedence of Drop.
.1.3.6.1.4.1.11.2.14.11.15.8.35.16.2.24,HPN-ICF-LswQos-MIB::hpnicfLocalPrecedenceMapTable,,not-accessible,,current,,The table of local-precedence map.
.1.3.6.1.4.1.11.2.14.11.15.8.35.16.2.24.1,HPN-ICF-LswQos-MIB::hpnicfLocalPrecedenceMapEntry,,not-accessible,hpnicfLocalPrecedenceMapConformLevel:hpnicfLocalPrecedenceMapLocalPrecedenceIndex,current,,Configuraion information of local-precedence map.
.1.3.6.1.4.1.11.2.14.11.15.8.35.16.2.24.1.1,HPN-ICF-LswQos-MIB::hpnicfLocalPrecedenceMapConformLevel,INTEGER,read-only,,current,,Conformable level of local-precedence map.
.1.3.6.1.4.1.11.2.14.11.15.8.35.16.2.24.1.2,HPN-ICF-LswQos-MIB::hpnicfLocalPrecedenceMapLocalPrecedenceIndex,INTEGER,read-write,,current,,Index of local-precedence.
.1.3.6.1.4.1.11.2.14.11.15.8.35.16.2.24.1.3,HPN-ICF-LswQos-MIB::hpnicfLocalPrecedenceMapCosValue,INTEGER,read-write,,current,,COS value.
.1.3.6.1.4.1.11.2.14.11.15.8.35.16.2.25,HPN-ICF-LswQos-MIB::hpnicfPortWredTable,,not-accessible,,current,,The table of PortWred.
.1.3.6.1.4.1.11.2.14.11.15.8.35.16.2.25.1,HPN-ICF-LswQos-MIB::hpnicfPortWredEntry,,not-accessible,hpnicfPortWredIfIndex:hpnicfPortWredQueueID,current,,Configuration information of port Wred.
.1.3.6.1.4.1.11.2.14.11.15.8.35.16.2.25.1.1,HPN-ICF-LswQos-MIB::hpnicfPortWredIfIndex,INTEGER,read-only,,current,,ifIndex of port.
.1.3.6.1.4.1.11.2.14.11.15.8.35.16.2.25.1.2,HPN-ICF-LswQos-MIB::hpnicfPortWredQueueID,INTEGER,read-only,,current,,ID of port-Wred queue.
.1.3.6.1.4.1.11.2.14.11.15.8.35.16.2.25.1.3,HPN-ICF-LswQos-MIB::hpnicfPortWredQueueStartLength,INTEGER,read-write,,current,,Queue length.
.1.3.6.1.4.1.11.2.14.11.15.8.35.16.2.25.1.4,HPN-ICF-LswQos-MIB::hpnicfPortWredQueueProbability,INTEGER,read-write,,current,,Probability.
.1.3.6.1.4.1.11.2.14.11.15.8.35.16.2.26,HPN-ICF-LswQos-MIB::hpnicfMirroringGroupTable,,not-accessible,,current,,The table of MirrorGroup.
.1.3.6.1.4.1.11.2.14.11.15.8.35.16.2.26.1,HPN-ICF-LswQos-MIB::hpnicfMirroringGroupEntry,,not-accessible,hpnicfMirroringGroupID,current,,Configuration information of MirrorGroup.
.1.3.6.1.4.1.11.2.14.11.15.8.35.16.2.26.1.1,HPN-ICF-LswQos-MIB::hpnicfMirroringGroupID,INTEGER,not-accessible,,current,,GroupID.
.1.3.6.1.4.1.11.2.14.11.15.8.35.16.2.26.1.2,HPN-ICF-LswQos-MIB::hpnicfMirroringGroupType,INTEGER,read-create,,current,local(1):remote-source(2):remote-destination(3),GroupType.
.1.3.6.1.4.1.11.2.14.11.15.8.35.16.2.26.1.3,HPN-ICF-LswQos-MIB::hpnicfMirroringGroupStatus,INTEGER,read-only,,current,active(1):inactive(2),MirroringGroup status.
.1.3.6.1.4.1.11.2.14.11.15.8.35.16.2.26.1.4,HPN-ICF-LswQos-MIB::hpnicfMirroringGroupRowStatus,INTEGER,read-create,,current,active(1):notInService(2):notReady(3):createAndGo(4):createAndWait(5):destroy(6),RowStatus, Now support three status: createAndGo, active, destroy.
.1.3.6.1.4.1.11.2.14.11.15.8.35.16.2.27,HPN-ICF-LswQos-MIB::hpnicfMirroringGroupMirrorTable,,not-accessible,,current,,MirroringGroup mirroring-port information.
.1.3.6.1.4.1.11.2.14.11.15.8.35.16.2.27.1,HPN-ICF-LswQos-MIB::hpnicfMirroringGroupMirrorEntry,,not-accessible,hpnicfMirroringGroupID,current,,MirroringGroup mirroring-port information.
.1.3.6.1.4.1.11.2.14.11.15.8.35.16.2.27.1.1,HPN-ICF-LswQos-MIB::hpnicfMirroringGroupMirrorInboundIfIndexList,OCTET,read-create,,current,,Inbound-Mirror ifIndex(for port) and slot number(for board) list. Example A describes the relation between values of hpnicfMirroringGroupMirrorInboundIfIndexList and hpnicfMirroringGroupMirrorInTypeList. Example A: hpnicfMirroringGroupMirrorInboundIfIndexList: '00000002 0C000022 00000007' hpnicfMirroringGroupMirrorInTypeList: '00000002 00000001 00000002' Every four octets represent an integer value. The first four octets of them should be same. Here the value '00000002' indicates there are two inbound mirror sources. The following every four octets of hpnicfMirroringGroupMirrorInboundIfIndexList indicate an ifIndex or a slot number of mirror source. For '0C000022' and '00000007' in the value of hpnicfMirroringGroupMirrorInboundIfIndexList above, the corresponding value of hpnicfMirroringGroupMirrorInTypeList is '00000001' and '00000002'(00000001 means the mirror source is port, 00000002 means the  mirror source is board, the meaning reference the object HpnicfMirrorOrMonitorType),  then '0C000022' indicates an ifIndex value 201326626(decimal), and '00000007'  indicates a slot with number 7(decimal). Values with different types(port/board) should be set in separate set operations. If one value with port type and one value with board type are set with same hpnicfMirroringGroupID separately, the result of get operation for that entry will be like the example A above.  If hpnicfMirroringGroupMirrorInTypeList is not supported, the first four octets of hpnicfMirroringGroupMirrorInboundIfIndexList also indicates the number of mirror source, but the following octets are values for ifIndex(port type). hpnicfMirroringGroupMirrorOutboundIfIndexList and hpnicfMirroringGroupMirrorOutTypeList are a pair and have the same relations like hpnicfMirroringGroupMirrorInboundIfIndexList and hpnicfMirroringGroupMirrorInTypeList pair. 
.1.3.6.1.4.1.11.2.14.11.15.8.35.16.2.27.1.2,HPN-ICF-LswQos-MIB::hpnicfMirroringGroupMirrorOutboundIfIndexList,OCTET,read-create,,current,,Outbound-Mirror ifIndex and slot number list. Please refer to the description of hpnicfMirroringGroupMirrorInboundIfIndexList.
.1.3.6.1.4.1.11.2.14.11.15.8.35.16.2.27.1.3,HPN-ICF-LswQos-MIB::hpnicfMirroringGroupMirrorRowStatus,INTEGER,read-create,,current,active(1):notInService(2):notReady(3):createAndGo(4):createAndWait(5):destroy(6),RowStatus, now support three status: createAndGo, active, destroy.
.1.3.6.1.4.1.11.2.14.11.15.8.35.16.2.27.1.4,HPN-ICF-LswQos-MIB::hpnicfMirroringGroupMirrorInTypeList,OCTET,read-create,,current,,Inbound-Mirror type list. Please refer to the description of hpnicfMirroringGroupMirrorInboundIfIndexList.
.1.3.6.1.4.1.11.2.14.11.15.8.35.16.2.27.1.5,HPN-ICF-LswQos-MIB::hpnicfMirroringGroupMirrorOutTypeList,OCTET,read-create,,current,,Outbound-Mirror type list. Please refer to the description of hpnicfMirroringGroupMirrorInboundIfIndexList.
.1.3.6.1.4.1.11.2.14.11.15.8.35.16.2.28,HPN-ICF-LswQos-MIB::hpnicfMirroringGroupMonitorTable,,not-accessible,,current,,MirroringGroup monitor-port information.
.1.3.6.1.4.1.11.2.14.11.15.8.35.16.2.28.1,HPN-ICF-LswQos-MIB::hpnicfMirroringGroupMonitorEntry,,not-accessible,hpnicfMirroringGroupID,current,,MirroringGroup monitor-port information.
.1.3.6.1.4.1.11.2.14.11.15.8.35.16.2.28.1.1,HPN-ICF-LswQos-MIB::hpnicfMirroringGroupMonitorIfIndex,INTEGER,read-create,,current,,If the monitor destination is port, the value means the ifIndex of this port. If the monitor destination is board, the value means the slot number of the board. Whether the value means ifIndex or slot number references the object hpnicfMirroringGroupMonitorType.
.1.3.6.1.4.1.11.2.14.11.15.8.35.16.2.28.1.2,HPN-ICF-LswQos-MIB::hpnicfMirroringGroupMonitorRowStatus,INTEGER,read-create,,current,active(1):notInService(2):notReady(3):createAndGo(4):createAndWait(5):destroy(6),RowStatus, now support three status: createAndGo, active, destroy.
.1.3.6.1.4.1.11.2.14.11.15.8.35.16.2.28.1.3,HPN-ICF-LswQos-MIB::hpnicfMirroringGroupMonitorType,INTEGER,read-create,,current,port(1):board(2),Specify whether the monitor destination is port or board. If this object is not supported, then the value of hpnicfMirroringGroupMonitorIfIndex means ifIndex.
.1.3.6.1.4.1.11.2.14.11.15.8.35.16.2.29,HPN-ICF-LswQos-MIB::hpnicfMirroringGroupReflectorTable,,not-accessible,,current,,MirroringGroup reflector-port information.
.1.3.6.1.4.1.11.2.14.11.15.8.35.16.2.29.1,HPN-ICF-LswQos-MIB::hpnicfMirroringGroupReflectorEntry,,not-accessible,hpnicfMirroringGroupID,current,,MirroringGroup reflector-port information.
.1.3.6.1.4.1.11.2.14.11.15.8.35.16.2.29.1.1,HPN-ICF-LswQos-MIB::hpnicfMirroringGroupReflectorIfIndex,INTEGER,read-create,,current,,Only valid for remote-source MirroringGroup.
.1.3.6.1.4.1.11.2.14.11.15.8.35.16.2.29.1.2,HPN-ICF-LswQos-MIB::hpnicfMirroringGroupReflectorRowStatus,INTEGER,read-create,,current,active(1):notInService(2):notReady(3):createAndGo(4):createAndWait(5):destroy(6),RowStatus, now support three status: createAndGo, active, destroy.
.1.3.6.1.4.1.11.2.14.11.15.8.35.16.2.30,HPN-ICF-LswQos-MIB::hpnicfMirroringGroupRprobeVlanTable,,not-accessible,,current,,MirroringGroup rprobe-vlan information.
.1.3.6.1.4.1.11.2.14.11.15.8.35.16.2.30.1,HPN-ICF-LswQos-MIB::hpnicfMirroringGroupRprobeVlanEntry,,not-accessible,hpnicfMirroringGroupID,current,,MirroringGroup rprobe-vlan information.
.1.3.6.1.4.1.11.2.14.11.15.8.35.16.2.30.1.1,HPN-ICF-LswQos-MIB::hpnicfMirroringGroupRprobeVlanID,INTEGER,read-create,,current,,Remote-Probe vlanID. 0 is invalid value. Only valid for remote-source and remote-destination MirroringGroup.
.1.3.6.1.4.1.11.2.14.11.15.8.35.16.2.30.1.2,HPN-ICF-LswQos-MIB::hpnicfMirroringGroupRprobeVlanRowStatus,INTEGER,read-create,,current,active(1):notInService(2):notReady(3):createAndGo(4):createAndWait(5):destroy(6),RowStatus, now support three status: createAndGo, active, destroy.
.1.3.6.1.4.1.11.2.14.11.15.8.35.16.2.31,HPN-ICF-LswQos-MIB::hpnicfMirroringGroupMirrorMacTable,,not-accessible,,current,,MirroringGroup MAC information.
.1.3.6.1.4.1.11.2.14.11.15.8.35.16.2.31.1,HPN-ICF-LswQos-MIB::hpnicfMirroringGroupMirrorMacEntry,,not-accessible,hpnicfMirroringGroupID:hpnicfMirroringGroupMirrorMacSeq,current,,MirroringGroup MAC information.
.1.3.6.1.4.1.11.2.14.11.15.8.35.16.2.31.1.1,HPN-ICF-LswQos-MIB::hpnicfMirroringGroupMirrorMacSeq,Integer32,not-accessible,,current,,The sequence MAC number of the same group.
.1.3.6.1.4.1.11.2.14.11.15.8.35.16.2.31.1.2,HPN-ICF-LswQos-MIB::hpnicfMirroringGroupMirrorMac,OCTET,read-create,,current,,The MAC address of the MirroringGroup.
.1.3.6.1.4.1.11.2.14.11.15.8.35.16.2.31.1.3,HPN-ICF-LswQos-MIB::hpnicfMirrorMacVlanID,Integer32,read-create,,current,,The vlan ID of MAC address .
.1.3.6.1.4.1.11.2.14.11.15.8.35.16.2.31.1.4,HPN-ICF-LswQos-MIB::hpnicfMirroringGroupMirroMacStatus,INTEGER,read-create,,current,active(1):notInService(2):notReady(3):createAndGo(4):createAndWait(5):destroy(6),The status of this conceptual row.
.1.3.6.1.4.1.11.2.14.11.15.8.35.16.2.32,HPN-ICF-LswQos-MIB::hpnicfMirroringGroupMirrorVlanTable,,not-accessible,,current,,MirroringGroup Vlan Information.
.1.3.6.1.4.1.11.2.14.11.15.8.35.16.2.32.1,HPN-ICF-LswQos-MIB::hpnicfMirroringGroupMirrorVlanEntry,,not-accessible,hpnicfMirroringGroupID:hpnicfMirroringGroupMirrorVlanSeq,current,,MirroringGroup Vlan Information.
.1.3.6.1.4.1.11.2.14.11.15.8.35.16.2.32.1.1,HPN-ICF-LswQos-MIB::hpnicfMirroringGroupMirrorVlanSeq,Integer32,not-accessible,,current,,The sequence vlan number of the same group.
.1.3.6.1.4.1.11.2.14.11.15.8.35.16.2.32.1.2,HPN-ICF-LswQos-MIB::hpnicfMirroringGroupMirrorVlanID,Integer32,read-create,,current,,The vlan ID of MirroringGroup.
.1.3.6.1.4.1.11.2.14.11.15.8.35.16.2.32.1.3,HPN-ICF-LswQos-MIB::hpnicfMirroringGroupMirrorVlanDirection,INTEGER,read-create,,current,inbound(1):outbound(2):both(3),The vlan direction of MirroringGroup.
.1.3.6.1.4.1.11.2.14.11.15.8.35.16.2.32.1.4,HPN-ICF-LswQos-MIB::hpnicfMirroringGroupMirroVlanStatus,INTEGER,read-create,,current,active(1):notInService(2):notReady(3):createAndGo(4):createAndWait(5):destroy(6),The status of this conceptual row.
.1.3.6.1.4.1.11.2.14.11.15.8.35.16.2.33,HPN-ICF-LswQos-MIB::hpnicfPortTrustTable,,not-accessible,,current,,Port trust information.
.1.3.6.1.4.1.11.2.14.11.15.8.35.16.2.33.1,HPN-ICF-LswQos-MIB::hpnicfPortTrustEntry,,not-accessible,hpnicfPortTrustIfIndex,current,,Port trust information.
.1.3.6.1.4.1.11.2.14.11.15.8.35.16.2.33.1.1,HPN-ICF-LswQos-MIB::hpnicfPortTrustIfIndex,Integer32,not-accessible,,current,,ifIndex of the port which port trust is configured.
.1.3.6.1.4.1.11.2.14.11.15.8.35.16.2.33.1.2,HPN-ICF-LswQos-MIB::hpnicfPortTrustTrustType,INTEGER,read-write,,current,port(1):cos(2):dscp(3),Trust type of port trust.
.1.3.6.1.4.1.11.2.14.11.15.8.35.16.2.33.1.3,HPN-ICF-LswQos-MIB::hpnicfPortTrustOvercastType,INTEGER,read-write,,current,noOvercast(1):overcastDSCP(2):overcastCOS(3),Overcast type of port trust.
.1.3.6.1.4.1.11.2.14.11.15.8.35.16.2.33.1.4,HPN-ICF-LswQos-MIB::hpnicfPortTrustReset,INTEGER,read-write,,current,reset(1),This object is used to reset port trust to default value. Read operation is meaningless.
.1.3.6.1.4.1.11.2.14.11.15.8.35.16.2.34,HPN-ICF-LswQos-MIB::hpnicfRemarkVlanIDTable,,not-accessible,,current,,Remark vlan ID information.
.1.3.6.1.4.1.11.2.14.11.15.8.35.16.2.34.1,HPN-ICF-LswQos-MIB::hpnicfRemarkVlanIDEntry,,not-accessible,hpnicfRemarkVlanIDAclIndex:hpnicfRemarkVlanIDIfIndex:hpnicfRemarkVlanIDVlanID:hpnicfRemarkVlanIDDirection,current,,Remark vlan ID information.
.1.3.6.1.4.1.11.2.14.11.15.8.35.16.2.34.1.1,HPN-ICF-LswQos-MIB::hpnicfRemarkVlanIDAclIndex,Integer32,not-accessible,,current,,Action identifier, acl index.
.1.3.6.1.4.1.11.2.14.11.15.8.35.16.2.34.1.2,HPN-ICF-LswQos-MIB::hpnicfRemarkVlanIDIfIndex,Integer32,not-accessible,,current,,Action identifier, ifIndex.
.1.3.6.1.4.1.11.2.14.11.15.8.35.16.2.34.1.3,HPN-ICF-LswQos-MIB::hpnicfRemarkVlanIDVlanID,Integer32,not-accessible,,current,,Action identifier, vlan ID.
.1.3.6.1.4.1.11.2.14.11.15.8.35.16.2.34.1.4,HPN-ICF-LswQos-MIB::hpnicfRemarkVlanIDDirection,INTEGER,not-accessible,,current,invalid(0):input(1):output(2),Action identifier, direction of data stream.
.1.3.6.1.4.1.11.2.14.11.15.8.35.16.2.34.1.5,HPN-ICF-LswQos-MIB::hpnicfRemarkVlanIDUserAclNum,Integer32,read-create,,current,,The number of the user acl.
.1.3.6.1.4.1.11.2.14.11.15.8.35.16.2.34.1.6,HPN-ICF-LswQos-MIB::hpnicfRemarkVlanIDUserAclRule,Integer32,read-create,,current,,The subitem of the user acl.
.1.3.6.1.4.1.11.2.14.11.15.8.35.16.2.34.1.7,HPN-ICF-LswQos-MIB::hpnicfRemarkVlanIDIpAclNum,Integer32,read-create,,current,,The num of the IP acl.
.1.3.6.1.4.1.11.2.14.11.15.8.35.16.2.34.1.8,HPN-ICF-LswQos-MIB::hpnicfRemarkVlanIDIpAclRule,Integer32,read-create,,current,,The subitem of the IP acl.
.1.3.6.1.4.1.11.2.14.11.15.8.35.16.2.34.1.9,HPN-ICF-LswQos-MIB::hpnicfRemarkVlanIDLinkAclNum,Integer32,read-create,,current,,The num of the link acl.
.1.3.6.1.4.1.11.2.14.11.15.8.35.16.2.34.1.10,HPN-ICF-LswQos-MIB::hpnicfRemarkVlanIDLinkAclRule,Integer32,read-create,,current,,The subitem of the link acl.
.1.3.6.1.4.1.11.2.14.11.15.8.35.16.2.34.1.11,HPN-ICF-LswQos-MIB::hpnicfRemarkVlanIDRemarkVlanID,Integer32,read-create,,current,,Remark vlan ID.
.1.3.6.1.4.1.11.2.14.11.15.8.35.16.2.34.1.12,HPN-ICF-LswQos-MIB::hpnicfRemarkVlanIDPacketType,INTEGER,read-create,,current,all(1):tagged(2):untagged(3),Packet type of the remarked vlan ID.
.1.3.6.1.4.1.11.2.14.11.15.8.35.16.2.34.1.13,HPN-ICF-LswQos-MIB::hpnicfRemarkVlanIDRowStatus,INTEGER,read-create,,current,active(1):notInService(2):notReady(3):createAndGo(4):createAndWait(5):destroy(6),The status of this conceptual row. 
.1.3.6.1.4.1.11.2.14.11.15.8.35.16.2.35,HPN-ICF-LswQos-MIB::hpnicfCosToDscpMapTable,,not-accessible,,current,,COS to DSCP map information.
.1.3.6.1.4.1.11.2.14.11.15.8.35.16.2.35.1,HPN-ICF-LswQos-MIB::hpnicfCosToDscpMapEntry,,not-accessible,hpnicfCosToDscpMapCosIndex,current,,COS to DSCP map information.
.1.3.6.1.4.1.11.2.14.11.15.8.35.16.2.35.1.1,HPN-ICF-LswQos-MIB::hpnicfCosToDscpMapCosIndex,Integer32,not-accessible,,current,,COS index of COS to DSCP map.
.1.3.6.1.4.1.11.2.14.11.15.8.35.16.2.35.1.2,HPN-ICF-LswQos-MIB::hpnicfCosToDscpMapDscpValue,Integer32,read-write,,current,,DSCP value of COS to DSCP map.
.1.3.6.1.4.1.11.2.14.11.15.8.35.16.2.35.1.3,HPN-ICF-LswQos-MIB::hpnicfCosToDscpMapReSet,INTEGER,read-write,,current,reset(1),This object is used to reset COS to DSCP map to default value. Read operation is meaningless.
.1.3.6.1.4.1.11.2.14.11.15.8.35.16.2.36,HPN-ICF-LswQos-MIB::hpnicfDscpToLocalPreMapTable,,not-accessible,,current,,DSCP to Local-precedence map information.
.1.3.6.1.4.1.11.2.14.11.15.8.35.16.2.36.1,HPN-ICF-LswQos-MIB::hpnicfDscpToLocalPreMapEntry,,not-accessible,hpnicfDscpToLocalPreMapDscpIndex,current,,DSCP to Local-precedence map information.
.1.3.6.1.4.1.11.2.14.11.15.8.35.16.2.36.1.1,HPN-ICF-LswQos-MIB::hpnicfDscpToLocalPreMapDscpIndex,Integer32,not-accessible,,current,,DSCP Index of DSCP to Local-precedence map.
.1.3.6.1.4.1.11.2.14.11.15.8.35.16.2.36.1.2,HPN-ICF-LswQos-MIB::hpnicfDscpToLocalPreMapLocalPreVal,Integer32,read-write,,current,,Local-precedence value of DSCP to Local-precedence map.
.1.3.6.1.4.1.11.2.14.11.15.8.35.16.2.36.1.3,HPN-ICF-LswQos-MIB::hpnicfDscpToLocalPreMapReset,INTEGER,read-write,,current,reset(1),This object is used to reset DSCP to Local-precedence map to default value. Read operation is meaningless.
.1.3.6.1.4.1.11.2.14.11.15.8.35.16.2.37,HPN-ICF-LswQos-MIB::hpnicfDscpToDropPreMapTable,,not-accessible,,current,,DSCP to Drop-precedence map information.
.1.3.6.1.4.1.11.2.14.11.15.8.35.16.2.37.1,HPN-ICF-LswQos-MIB::hpnicfDscpToDropPreMapEntry,,not-accessible,hpnicfDscpToDropPreMapDscpIndex,current,,DSCP to Drop-precedence map information.
.1.3.6.1.4.1.11.2.14.11.15.8.35.16.2.37.1.1,HPN-ICF-LswQos-MIB::hpnicfDscpToDropPreMapDscpIndex,Integer32,not-accessible,,current,,DSCP Index of DSCP to Drop-precedence map.
.1.3.6.1.4.1.11.2.14.11.15.8.35.16.2.37.1.2,HPN-ICF-LswQos-MIB::hpnicfDscpToDropPreMapDropPreVal,Integer32,read-write,,current,,Drop-precedence value of DSCP to Drop-precedence map.
.1.3.6.1.4.1.11.2.14.11.15.8.35.16.2.37.1.3,HPN-ICF-LswQos-MIB::hpnicfDscpToDropPreMapReset,INTEGER,read-write,,current,reset(1),This object is used to reset DSCP to Drop-precedence map to default value. Read operation is meaningless.
.1.3.6.1.4.1.11.2.14.11.15.8.35.16.2.38,HPN-ICF-LswQos-MIB::hpnicfDscpToCosMapTable,,not-accessible,,current,,DSCP to COS map information.
.1.3.6.1.4.1.11.2.14.11.15.8.35.16.2.38.1,HPN-ICF-LswQos-MIB::hpnicfDscpToCosMapEntry,,not-accessible,hpnicfDscpToCosMapDscpIndex,current,,DSCP to COS map information.
.1.3.6.1.4.1.11.2.14.11.15.8.35.16.2.38.1.1,HPN-ICF-LswQos-MIB::hpnicfDscpToCosMapDscpIndex,Integer32,not-accessible,,current,,DSCP index of DSCP to COS map.
.1.3.6.1.4.1.11.2.14.11.15.8.35.16.2.38.1.2,HPN-ICF-LswQos-MIB::hpnicfDscpToCosMapCosValue,Integer32,read-write,,current,,COS value of DSCP to COS map.
.1.3.6.1.4.1.11.2.14.11.15.8.35.16.2.38.1.3,HPN-ICF-LswQos-MIB::hpnicfDscpToCosMapReset,INTEGER,read-write,,current,reset(1),This object is used to reset DSCP to COS map to default value. Read operation is meaningless.
.1.3.6.1.4.1.11.2.14.11.15.8.35.16.2.39,HPN-ICF-LswQos-MIB::hpnicfDscpToDscpMapTable,,not-accessible,,current,,DSCP to DSCP map information.
.1.3.6.1.4.1.11.2.14.11.15.8.35.16.2.39.1,HPN-ICF-LswQos-MIB::hpnicfDscpToDscpMapEntry,,not-accessible,hpnicfDscpToDscpMapDscpIndex,current,,DSCP to DSCP map information.
.1.3.6.1.4.1.11.2.14.11.15.8.35.16.2.39.1.1,HPN-ICF-LswQos-MIB::hpnicfDscpToDscpMapDscpIndex,Integer32,not-accessible,,current,,DSCP index of DSCP to DSCP map.
.1.3.6.1.4.1.11.2.14.11.15.8.35.16.2.39.1.2,HPN-ICF-LswQos-MIB::hpnicfDscpToDscpMapDscpValue,Integer32,read-write,,current,,DSCP value of DSCP to DSCP map.
.1.3.6.1.4.1.11.2.14.11.15.8.35.16.2.39.1.3,HPN-ICF-LswQos-MIB::hpnicfDscpToDscpMapReset,INTEGER,read-write,,current,reset(1),This object is used to reset DSCP to DSCP map to default value. Read operation is meaningless.
.1.3.6.1.4.1.11.2.14.11.15.8.35.17,HPN-ICF-OID-MIB::hpnicfLswMix,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.8.35.17.1,HPN-ICF-LswMix-MIB::hpnicfLswLastSwitchDate,INTEGER,read-only,,current,,This object indicates the date of the most recent change to the mpu(Main Processing Unit). 
.1.3.6.1.4.1.11.2.14.11.15.8.35.17.2,HPN-ICF-LswMix-MIB::hpnicfLswLastSwitchTime,INTEGER,read-only,,current,,This object indicates the time of the most recent change to the mpu. 
.1.3.6.1.4.1.11.2.14.11.15.8.35.17.3,HPN-ICF-LswMix-MIB::hpnicfLswMpuSwitchsNum,INTEGER,read-only,,current,,This object indicates the total times of the mpu switched since the system start up. 
.1.3.6.1.4.1.11.2.14.11.15.8.35.17.4,HPN-ICF-LswMix-MIB::hpnicfLswMpuSwitch,INTEGER,read-write,,current,switch(1),Setting this object will immediately switch the standby mpu to master mpu. Read is not supported. 
.1.3.6.1.4.1.11.2.14.11.15.8.35.17.5,HPN-ICF-LswMix-MIB::hpnicfLswXSlotTable,,not-accessible,,current,,The source main table.
.1.3.6.1.4.1.11.2.14.11.15.8.35.17.5.1,HPN-ICF-LswMix-MIB::hpnicfLswXSlotEntry,,not-accessible,hpnicfLswFrameIndex:hpnicfLswSlotIndex,current,,An entry in the source main table.
.1.3.6.1.4.1.11.2.14.11.15.8.35.17.5.1.1,HPN-ICF-LswMix-MIB::hpnicfLswMainCardBoardStatus,INTEGER,read-only,,current,master(1):standby(2):process(3),The value describes whether the board is master, standby or process. master and standby are the possible states for the mpu, while process indicates the state of lpu(Line Processing Unit)
.1.3.6.1.4.1.11.2.14.11.15.8.35.17.5.1.2,HPN-ICF-LswMix-MIB::hpnicfLswCrossBarStatus,INTEGER,read-only,,current,master(1):standby(2),The value describes whether the crossbar is master or standby. It is master when it's in the master mpu board, standby when in the standby mpu. But both crossbars in mpus are master when the device in load-balance mode.
.1.3.6.1.4.1.11.2.14.11.15.8.35.17.10,HPN-ICF-LswMix-MIB::hpnicfsMixTrapMib,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.8.35.17.10.1,HPN-ICF-LswMix-MIB::hpnicfSlaveSwitchOver,,,,,,An hpnicfSlaveSwitchOver trap signifies that the action of standby mpu switching to master has completed. 
.1.3.6.1.4.1.11.2.14.11.15.8.35.18,HPN-ICF-OID-MIB::hpnicfLswDeviceAdmin,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.8.35.18.1,HPN-ICF-LSW-DEV-ADM-MIB::hpnicfLswSystemPara,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.8.35.18.1.1,HPN-ICF-LSW-DEV-ADM-MIB::hpnicfLswSysIpAddr,IpAddress,read-only,,current,,System IP address, which is the primary IP address of the VLAN interface that has smallest VLAN ID and is configured IP address.
.1.3.6.1.4.1.11.2.14.11.15.8.35.18.1.2,HPN-ICF-LSW-DEV-ADM-MIB::hpnicfLswSysIpMask,IpAddress,read-only,,current,,Mask of the system IP address.
.1.3.6.1.4.1.11.2.14.11.15.8.35.18.1.3,HPN-ICF-LSW-DEV-ADM-MIB::hpnicfLswSysCpuRatio,Integer32,read-only,,current,,CPU usage of the system in accuracy of 1%, and the range of value is 1 to 100.
.1.3.6.1.4.1.11.2.14.11.15.8.35.18.1.4,HPN-ICF-LSW-DEV-ADM-MIB::hpnicfLswSysVersion,OCTET,read-only,,current,,Information of the system version.
.1.3.6.1.4.1.11.2.14.11.15.8.35.18.1.5,HPN-ICF-LSW-DEV-ADM-MIB::hpnicfLswSysTime,OCTET,read-write,,current,,System time.
.1.3.6.1.4.1.11.2.14.11.15.8.35.18.1.6,HPN-ICF-LSW-DEV-ADM-MIB::hpnicfLswSysUNMCastDropEnable,INTEGER,read-write,,current,disable(0):enable(1),Enable or disable discarding of unknown multicast packet.
.1.3.6.1.4.1.11.2.14.11.15.8.35.18.1.7,HPN-ICF-LSW-DEV-ADM-MIB::hpnicfLswSysManagementVlan,Integer32,read-write,,current,,System management VLAN.
.1.3.6.1.4.1.11.2.14.11.15.8.35.18.1.8,HPN-ICF-LSW-DEV-ADM-MIB::hpnicfLswSysVlanRange,OCTET,read-write,,current,,System VLAN range, if set VLAN range, must bind mangement IP/Mask.
.1.3.6.1.4.1.11.2.14.11.15.8.35.18.1.9,HPN-ICF-LSW-DEV-ADM-MIB::hpnicfLswSysManagementIpAddr,IpAddress,read-write,,current,,System IP address.
.1.3.6.1.4.1.11.2.14.11.15.8.35.18.1.10,HPN-ICF-LSW-DEV-ADM-MIB::hpnicfLswSysManagementIpMask,IpAddress,read-write,,current,,Mask of the system IP address.
.1.3.6.1.4.1.11.2.14.11.15.8.35.18.1.11,HPN-ICF-LSW-DEV-ADM-MIB::hpnicfMacAddressCountPort,Integer32,read-only,,current,,Supportted MAC address number on port.
.1.3.6.1.4.1.11.2.14.11.15.8.35.18.1.12,HPN-ICF-LSW-DEV-ADM-MIB::hpnicfMacAddressCountMachine,Integer32,read-only,,current,,Supportted MAC address number on machine.
.1.3.6.1.4.1.11.2.14.11.15.8.35.18.1.13,HPN-ICF-LSW-DEV-ADM-MIB::hpnicfLswSysPhyMemory,Unsigned32,read-only,,current,,The memory of physical. For the distributed device, it represents the memory size on the master slot. If the amount of physical memory exceeds 4,294,967,295 bytes, the value remains 4,294,967,295 bytes.
.1.3.6.1.4.1.11.2.14.11.15.8.35.18.1.14,HPN-ICF-LSW-DEV-ADM-MIB::hpnicfLswSysMemory,Unsigned32,read-only,,current,,The memory of system. Note that the system memory means the memory can be used by the software platform. For the distributed device, it represents the memory size on the master slot. If the amount of system memory exceeds 4,294,967,295 bytes, the value remains 4,294,967,295 bytes.
.1.3.6.1.4.1.11.2.14.11.15.8.35.18.1.15,HPN-ICF-LSW-DEV-ADM-MIB::hpnicfLswSysMemoryUsed,Unsigned32,read-only,,current,,The system memory in use. Note that the system memory means the memory can be used by the software platform. For the distributed device, it represents the memory size on the master slot. If the amount of used memory exceeds 4,294,967,295 bytes, the value remains 4,294,967,295 bytes.
.1.3.6.1.4.1.11.2.14.11.15.8.35.18.1.16,HPN-ICF-LSW-DEV-ADM-MIB::hpnicfLswSysMemoryRatio,Unsigned32,read-only,,current,,The percentage of system memory in use. Note that the system memory means the memory can be used by the software platform. hpnicfLswSysMemoryUsed hpnicfLswSysMemoryRatio = -------------------- hpnicfLswSysMemory For the distributed device, it represents the memory used ratio on the master slot.
.1.3.6.1.4.1.11.2.14.11.15.8.35.18.1.17,HPN-ICF-LSW-DEV-ADM-MIB::hpnicfLswSysTemperature,Integer32,read-only,,current,,The temperature of system. For the distributed device, it represents the temperature on the master slot.
.1.3.6.1.4.1.11.2.14.11.15.8.35.18.1.18,HPN-ICF-LSW-DEV-ADM-MIB::hpnicfLswSysPhyMemRev,Counter64,read-only,,current,,Size of the memory space for the software platform. This node is used to replace hpnicfLswSysPhyMemory. For a distributed device, it indicates the size of the memory space on the active MPU.
.1.3.6.1.4.1.11.2.14.11.15.8.35.18.1.19,HPN-ICF-LSW-DEV-ADM-MIB::hpnicfLswSysMemRev,Counter64,read-only,,current,,Size of the physical memory space. This node is used to replace hpnicfLswSysMemory. For a distributed device, it indicates the size of the memory space on the active MPU.
.1.3.6.1.4.1.11.2.14.11.15.8.35.18.1.20,HPN-ICF-LSW-DEV-ADM-MIB::hpnicfLswSysMemUsedRev,Counter64,read-only,,current,,Size of the memory space used by the software system. This node is used to replace hpnicfLswSysMemoryUsed. For a distributed device, it indicates the size of the memory space on the active MPU
.1.3.6.1.4.1.11.2.14.11.15.8.35.18.4,HPN-ICF-LSW-DEV-ADM-MIB::hpnicfLswSlotConf,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.8.35.18.4.2,HPN-ICF-LSW-DEV-ADM-MIB::hpnicfLswFrameTable,,not-accessible,,current,,Frame information table.
.1.3.6.1.4.1.11.2.14.11.15.8.35.18.4.2.1,HPN-ICF-LSW-DEV-ADM-MIB::hpnicfLswFrameEntry,,not-accessible,hpnicfLswFrameIndex,current,,Frame description table entry.
.1.3.6.1.4.1.11.2.14.11.15.8.35.18.4.2.1.1,HPN-ICF-LSW-DEV-ADM-MIB::hpnicfLswFrameIndex,Integer32,read-only,,current,,The unique index of frame.
.1.3.6.1.4.1.11.2.14.11.15.8.35.18.4.2.1.2,HPN-ICF-LSW-DEV-ADM-MIB::hpnicfLswFrameType,Integer32,read-only,,current,,Frame type.
.1.3.6.1.4.1.11.2.14.11.15.8.35.18.4.2.1.3,HPN-ICF-LSW-DEV-ADM-MIB::hpnicfLswFrameDesc,OCTET,read-write,,current,,Frame description.
.1.3.6.1.4.1.11.2.14.11.15.8.35.18.4.2.1.4,HPN-ICF-LSW-DEV-ADM-MIB::hpnicfLswSlotNumber,Integer32,read-only,,current,,Number of slots of the current frame.
.1.3.6.1.4.1.11.2.14.11.15.8.35.18.4.2.1.5,HPN-ICF-LSW-DEV-ADM-MIB::hpnicfLswFrameAdminStatus,INTEGER,read-only,,current,normal(1):fault(2):other(3),The Status of frame.
.1.3.6.1.4.1.11.2.14.11.15.8.35.18.4.3,HPN-ICF-LSW-DEV-ADM-MIB::hpnicfLswSlotTable,,not-accessible,,current,,Slot description table.
.1.3.6.1.4.1.11.2.14.11.15.8.35.18.4.3.1,HPN-ICF-LSW-DEV-ADM-MIB::hpnicfLswSlotEntry,,not-accessible,hpnicfLswFrameIndex:hpnicfLswSlotIndex,current,,Slot description table entry.
.1.3.6.1.4.1.11.2.14.11.15.8.35.18.4.3.1.1,HPN-ICF-LSW-DEV-ADM-MIB::hpnicfLswSlotIndex,Integer32,read-only,,current,,Slot index. When the slot is empty, listed as vacant slot.
.1.3.6.1.4.1.11.2.14.11.15.8.35.18.4.3.1.2,HPN-ICF-LSW-DEV-ADM-MIB::hpnicfLswSlotType,INTEGER,read-only,,current,type-NULL(0):type-10OR100M(1):type-1000BASE-LX-SM(2):type-1000BASE-SX-MM(3):type-1000BASE-TX(4):type-100M-SINGLEMODE-FX(5):type-100M-MULTIMODE-FX(6):type-100M-100BASE-TX(7):type-100M-HUB(8):type-VDSL(9):type-STACK(10):type-1000BASE-ZENITH-FX(11):type-1000BASE-LONG-FX(12):type-ADSL(13):type-4T10OR100-4FX100SM(14):type-4T10OR100-4FX100MM(15):type-VSPL(16):type-ASPL(17):type-1000M-SFP(18):type-LS82O2CM(19):type-LS82P2CM(20):type-LS82O4GM(21):type-LS82GB4C(22):type-LS82GT4C(23):type-LS82ST4C(24):bOARD-TYPE-LS82DSPU(25):bOARD-TYPE-LS81GP8U(26):bOARD-TYPE-LS82GT20(27):bOARD-TYPE-LS82FE48(28):type-LS82T24B(29):type-LSB1SRPA(30):type-LSB1FT48A(31):type-LSB1FT48B(32):type-LSB1F48GA(33):type-LSB1F48GB(34):type-LSB1FP20A(35):type-LSB1FP20B(36):type-FT48A(37):type-GP4U(38):type-GP2U(39):type-TGX1A(40):type-1000BASE-LX-SM-IR-SC(41):type-1000BASE-SX-MM-SR-SC(42):type-1000BASE-T-RJ45(43):type-100BASE-FX-SM-IR-SC(44):type-100BASE-FX-MM-SR-SC(45):type-GIGA-STACK-1M-PC(46):type-1000BASE-LX-SM-VLR-LC(47):type-1000BASE-LX-SM-LR-LC(48):type-100BASE-FX-SM-LR-SC(49):type-1000BASE-X-GBIC(50):type-100M-SINGLEMODE-FX-LC(51):type-100M-MULTIMODE-FX-LC(52):type-1000BASE-4SFP(53):type-1000BASE-4GBIC(54):type-1000BASE-FIXED-4SFP(55):type-1000BASE-FIXED-4GBIC(56):type-LSB1GP12A(57):type-LSB1GP12B(58):type-LSB1TGX1A(59):type-LSB1TGX1B(60):type-LSB1P4G8A(61):type-LSB1P4G8B(62):type-LSB1A4G8A(63):type-LSB1A4G8B(64):type-FT48C(65):type-FP20(66):bOARD-TYPE-LS81FT48(67):bOARD-TYPE-LS81GB8U(68):bOARD-TYPE-LS81GT8U(69):bOARD-TYPE-LS81FS24(70):bOARD-TYPE-LS81FM24(71):bOARD-TYPE-LS82GP20(72):type-LSB1SRPB(73):type-LSB1F32GA(74):type-LSB1F32GB(75):type-LSB2FT48A(76):type-LSB2FT48B(77):type-LSB1GT12A(78):type-LSB1GT12B(79):type-PC4U(80):type-FT32A(81):type-GT4U(82):bOARD-TYPE-LS83FP20A(83):bOARD-TYPE-LS82HGMU(84):type-LSB1GP8TB(85):type-LSB1GP8TC(86):type-LSB1GT8PB(87):type-LSB1GT8PC(88):type-LSB1FT48C(89):type-LSB1FP20C(90):type-LSB1F32GC(91):type-LSB1GT12C(92):type-LSB1GP12C(93):type-LSB1P4G8C(94):type-LSB1TGX1C(95):type-LSB1GT24B(96):type-LSB1GT24C(97):type-LSB1GP24B(98):type-LSB1GP24C(99):type-LSB1XP2B(100):type-LSB1XP2C(101):type-LSB1GV48B(102):type-LSB1GV48C(103):type-LSB1SRPC(104):type-LSB1SRP1N0(105):type-LSB1SRP1N1(106):type-LSB1SRP1N2(107):type-GT24(108):type-GP24(109):type-XP2(110):type-GV48(111):type-LSG1GP8U(112):type-LSG1GT8U(113):type-LSG1TG1U(114):type-LSG1TD1U(115):type-LSB2FT48C(116):type-LSB1GT48B(117):type-LSB1GT48C(118):type-LS81GT48(119):type-LS81SRPG0(120):type-LS81SRPG1(121):type-LS81SRPG2(122):type-LS81SRPG3(123):type-SR01SRPUB(125):type-SR01SRPUA(126):type-SR01GP12L(127):type-SR01GP12W(128):type-SR01FT48L(129):type-SR01FT48W(130):type-SR01XK1W(131):type-SR01FP20W(132):type-SR01GT12W(133):type-SR01F32GL(134):type-SR01F32GW(135):type-SR01GT8PL(136):type-SR01GT8PW(137):type-SR01P4G8W(138):type-LSA1FP8U(139):type-LSB1SP4B(140):type-LSB1SP4C(141):type-LSB1UP1B(142):type-LSB1UP1C(143):type-LSB1XP4B(144):type-LSB1XP4C(145):type-SP4(146):type-UP1(147):type-XP4(148):type-LS81VSNP(149):type-LS81T12P(150):type-LS81P12T(151):type-LS81GP8UB(152):type-LS81FT48E(153):type-LS81GP4UB(154):type-LS81GT8UE(155):type-LS81GT48A(156):type-LS81FP48(157):type-LSB1XK1B(158):type-LSB1XK1C(159):type-SR01SRPUC(160):type-SR01SRPUD(161):type-SR01SRPUE(162):type-LSB1SRP1N3(163):type-LSB1VP2B(164):type-LSB1NATB(165):type-LSB1VPNB(166):type-LSGP8P(167):type-LSXK1P(168):type-LSXP2P(169):type-LS81FT48F(170):type-LS81PT8G(171):type-LS81PT4G(172):type-LSSTK24G(173):type-LS82GT20A(174):type-LS82GP20A(175):type-LS81TGX1C(176):type-VP2(177):type-LSA1FB8U(178):type-LS81T12PE(179):type-LS81P12TE(180):type-LSB1SRP2N0(181):type-LSB1SRP2N3(182):type-LSB1GV48DB(183):type-LSB1FW8B(184):type-LSB1IPSEC8B(185):type-LSB1IDSB(186):type-LSB1IPSB(187):type-LSB2FT48CA(188):type-LSB1FP20CA(189):type-LSB1F32GCA(190):type-LSB1P4G8CA(191):type-LSB1GT12CA(192):type-LSB1GT24CA(193):type-LSB1GP12CA(194):type-LSB1GP24CA(195):type-LSB1GT8PCA(196):type-LSB1XP2CA(197):type-LSB1XK1CA(198):type-LSB1XP4CA(199):type-LSB1UP1CA(200):type-LSB1SP4CA(201):type-LSB1VP2CA(202):type-SR01FT48WA(203):type-SR01FP20WA(204):type-SR01F32GWA(205):type-SR01P4G8WA(206):type-SR01GT12WA(207):type-SR01GT24WA(208):type-SR01GP12WA(209):type-SR01GP24WA(210):type-SR01GT8PWA(211):type-SR01XP2WA(212):type-SR01XK1WA(213):type-SR01UP1WA(214):type-SR01SP4WA(215):type-GP8U(216):type-LSEXP1P(217):type-LSEXK1P(218):type-LSEXS1P(219):type-LS81GP48(220):type-LS81GT48B(221):type-LS81T16P(222):type-LS81T32P(223):type-LS81TGX2(224):type-LS81TGX4(225):type-LSB1GV48DA(226):type-SR01GV48VB(227):type-LSB1GT24DB(228):type-LSB1GP24DB(229):type-LSB1GP24DC(230):type-LSB1FW8DB(231):type-LSB1IPSEC8DB(232):type-SR01GT24VB(233):type-SR01GP24VC(234):type-SR01VP2WA(235):type-SR01FW8VB(236):type-SR01IPSEC8VB(237):type-SR01NATL(238):type-SR01VPNL(239):type-LSB1GP24CB(240):type-LSB1GP48DB(241):type-LSB1XP2CB(242):type-XP4L(243):type-LSB1XP4LDB(244):type-LSB1XP4LDC(245):type-AHP4(246):type-LSB1AHP4GCA(247):type-CLP4(248):type-LSB1CLP4GCA(249):type-ET32(250):type-LSB1ET32GCA(251):type-LSB1IDSDB(252):type-LSB1SRP2N1(253):bOARD-TYPE-LS82SRPB(254):bORAD-TYPE-LS83SRPC(255):type-Main(256):type-LSB1SRP2N2(257):type-LSB1NAMB(258):type-RSP2(259):type-LSB1RSP2CA(260):type-SR01XP4LVC(261):type-SR01AHP4GWA(262):type-SR01CLP4GWA(263):type-SR01ET32GWA(264):type-SR01IDSVB(265):type-SR01SRPUF(266):type-SR01NAML(267):type-SR01RSP2WA(268):type-LSPM1XP1P(269):type-LSPM1XP2P(270):type-LSPM1CX2P(271):type-STK-1000BASE-T(272):type-LSB1SRP1M0(300):type-LSB1SRP1M1(301):type-LSB1GP12DB(302):type-LSB1GT12DB(303):type-LSB1XK1DB(304):type-LSB1XP2DB(305):type-LSB1XP2DC(306):type-LSB1GT48LDB(307):type-LSB1XP4TDB(308):type-LSB1XP4TDC(309):type-LSB1RSP2DC(310):type-LSB1VP2DC(311):type-LSB1XP4DB(312):type-LSB1SRP2E0(313):type-LSB1SRP2E1(314):type-LSB1SRP2E2(315):type-LSB1SRP2E3(316):type-SR01SRPUQ(317):type-AHP1(318):type-AHP2(319):type-CLP1(320):type-CLP2(321):type-ET16(322):type-LSB1SRP1NA0(323):type-LSB1SRP1NA1(324):type-LSB1SRP1NA2(325):type-LSB1SRP1NA3(326):type-SR01AHP1GWA(327):type-SR01AHP2GWA(328):type-SR01CLP1GWA(329):type-SR01CLP2GWA(330):type-SR01ET16GWA(331):type-SR01GP12VB(332):type-SR01XK1VB(333):type-SR01XP2VC(334):type-SR01XP4LVB(335):type-SR01SRPUEA(336):type-LSB1SRP1N4(337):type-LSB1SRP1N5(338):type-LSB1SRP1N6(339):type-LSB1SRP1N7(340):type-LSB1SRP2N4(341):type-LSB1SRP2N5(342):type-LSB1SRP2N6(343):type-LSB1SRP2N7(344):type-LSB1SRP1NA4(345):type-LSB1SRP1NA5(346):type-LSB1SRP1NA6(347):type-LSB1SRP1NA7(348):type-LSB2GV48DA(349):type-LSB1RGP2GDB(350):type-LSB1RGP4GDB(351):type-LSB2GP24DB(352):type-LSB2GP24DC(353):type-LSB2GT24DB(354):type-LSB2FW8DB(355):type-LSB2IPSEC8DB(356):type-LSB2GV48DB(357):type-RGP2(358):type-RGP4(359):type-SR02FW8VB(360):type-SR02IPSEC8VB(361):type-LSB2SRP1N0(362):type-LSB2SRP1N1(363):type-LSB2SRP1N2(364):type-LSB2SRP1N3(365):type-LSB2SRP1N4(366):type-LSB2SRP1N5(367):type-LSB2SRP1N6(368):type-LSB2SRP1N7(369):type-SR02SRPUE(370):type-SR01LN1BQH0(371):type-SR01DXP1L(372):type-SR01DGP10L(373):type-SR01DRSP2L(374):type-SR01DRUP1L(375):type-SR01DGP20R(376):type-SR01DPLP8L(377):type-SR01DXP2R(378):type-LSB1FW2A0(379):type-LSB1GP48LDB(380):type-SR01LN1BNA0(381):type-SR01LN2BQH0(382):type-SR01LN2BNA0(383):type-SR01DGT20R(384):type-SR01DPSP4L(385):type-SR01DPUP1L(386):type-SR01DPL2G6L(387):type-SR01DPH2G6L(388):type-SR01DPS2G4L(389):type-SR01DCL1G8L(390):type-SR01DCL2G8L(391):type-SR01DET8G8L(392):type-SR02SRP2E3(393):type-SR02SRP1E3(394):type-SR02SRP1M3(395):type-SR01DQCP4L(396):type-SR01DTCP8L(397):type-LSB1AFC1A0(398):type-LSB1SSL1A0(399):type-IMNAM(400):type-IMNAT(401):type-PICAHP1L(402):type-PICALP4L(403):type-PICCHP4L(404):type-PICCHS1G4L(405):type-PICCLS4G4L(406):type-PICCSP1L(407):type-LSB1ACG1A0(408):type-LST1MRPNC1(409):type-LST1SF18B1(410):type-LST1SF08B1(411):type-LST1GT48LEC1(412):type-LST1GP48LEC1(413):type-LST1XP4LEC1(414):type-LST1XP8LEC1(415):type-LSR1SRP2B1(416):type-LSR1SRP2C1(417):type-LSR1SRP2B2(418):type-LSR1SRP2C2(419):type-LSR1GT24LEC1(420):type-LSR1GP24LEB1(421):type-LSR1GP24LEC1(422):type-LSR1GT48LEB1(423):type-LSR1GT48LEC1(424):type-LSR1GP48LEB1(425):type-LSR1GP48LEC1(426):type-LSR2GV48REB1(427):type-LSR1XP2LEB1(428):type-LSR1XP2LEC1(429):type-LSR1XP4LEB1(430):type-LSR1XP4LEC1(431):type-IMFW(432):type-LSB1LB1A0(433):type-LSB1IPS1A0(434):type-LST1GT48LEB1(435):type-LST1GP48LEB1(436):type-LST1XP4LEB1(437):type-LST1XP8LEB1(438):type-LST1XP32REB1(439):type-LST1XP32REC1(440):type-LSR1FW2A1(441):type-LSR1SSL1A1(442):type-SR01DET32G2L(443):type-LSR1GP24LEF1(444):type-LSR1XP4LEF1(445):type-LSR1LB1A1(446):type-LSR1NSM1A1(447):type-LSR1ACG1A1(448):type-LSR1IPS1A1(449):type-LSR2GP24LEB1(450):type-LSR2GT24LEB1(451):type-LSR2GT48LEB1(452):type-SPC-GP24L(453):type-SPC-GT48L(454):type-SPC-GP48L(455):type-SPC-XP2L(456):type-SPC-XP4L(457):type-SR06SRP2E3(458):type-SPE-2010-E(459):type-SPE-2020-E(460):type-SPC-XP4L-S-SDI(461):type-SPC-GT48L-SDI(462):type-SPC-GP48L-S-SDI(463):type-SR02OPMA0(464):type-LSR1XP16REB1(465):type-LSR1GP48LEF1(466):type-LST1GP48LEF1(467):type-LST1XP8LEF1(468):type-SPE-1010-II(469):type-SPE-1010-E-II(470):type-SPE-1020-II(471):type-SPE-1020-E-II(472):type-LST1FW2A1(473):type-LST1NSM1A1(474):type-LST1LB1A1(475):type-LST1ACG1A1(476):type-LST1IPS1A1(477):type-LSR1DRUP1L1(478):type-LSR1DPUP1L1(479):type-LSR1DPSP4L1(480):type-LSR1DTCP8L1(481):type-LSR1DXP1L1(482):type-LSR1DGP10L1(483):type-LSR1LN1BNL1(484):type-LSR1LN2BL1(485):type-LSR1SRP2D1(486):type-IM-NAT-II(487):type-IM-NAM-II(488):type-CR-MRP-I(489):type-CR-SF18C(490):type-CR-SF08C(491):type-CR-SPC-XP8LEF(492):type-CR-SPC-XP4LEF(493):type-CR-SPC-GP48LEF(494):type-CR-SPC-GT48LEF(495):type-CR-SPE-3020-E(496):type-CR-SPC-PUP4L-E(497):type-LST1SF08C1(498):type-LST1SF18C1(499):type-LS81GP16TM(500):type-LS81VP4C(501):type-LS8M1PT8P0(502):type-LS8M1PT8GB0(503):type-LS8M1PT4GB0(504):type-LS81GP2R(505):type-LS81GP4R(506):type-LS81IPSECA(507):type-LS81FWA(508):type-LS82VSNP(509):type-LSQ1GV48SA(510):type-LSQ1SRPB(511):type-LSQ1SRP2XB(512):type-LSQ1SRP1CB(513):type-LSQ1FV48SA(514):type-LSD1MPUA(515):type-LSD1GP20A0(516):type-LSD1GP20TA0(517):type-LSD1GP36A0(518):type-LSD1GP20XA0(519):type-LSD1GP20EA0(520):type-LSD1GP20RA0(521):type-LSD1GP16A0(522):type-LSD1GT16A0(523):type-LSD1XP2A0(524):type-LSD1EP2A0(525):type-LSD1RP2A0(526):type-LSQ1GV48SC(527):type-LSQ1FP48SA(528):type-LSQ1GP24SC(529):type-LSQ1GT24SC(530):type-LSQ1TGX2SC(531):type-LSQ1GP12EA(532):type-LSQ1TGX1EA(533):type-LSQ1P24XGSC(534):type-LSQ1T24XGSC(535):type-LS81TGX1B(536):type-LSQ1PT4PSC0(537):type-LS81SRPG13(538):type-LS81SRPG14(539):type-LS81SRPG15(540):type-LSQ1GP48SC0(541):type-LSQ1GP12SC0(542):type-LSD1SRPA0(543):type-LSD1SRPB0(544):type-LSD1SRPC0(545):type-LSD1GT16PES0(546):type-LSD1GP24ES0(547):type-LSD1GT24XES0(548):type-LSD1GP24XES0(549):type-LSD1XP2ES0(550):type-LSD1GP48ES0(551):type-LSQ1MPUA0(552):type-LSQ1MPUA1(553):type-LSQ1FWBSC0(554):type-LSQ1PT8PSC0(555):type-LSQ1PT16PSC0(556):type-SA11MPUA0(557):type-SA11MPUB0(558):type-LSQ1AFCBSC0(559):type-LSQ1MPUB0(560):type-LSQ1MPUB1(561):type-LSQ1PT4PSC1(562):type-LSQ1PT8PSC1(563):type-LSQ1PT16PSC1(564):type-LSQ1FP48USA0(565):type-LSQ1FP48USA1(566):type-LSQ1FV48USA0(567):type-LSQ1FV48USA1(568):type-LSQ1SRPD0(569):type-LSQ1CGP24TSC0(570):type-LSQ1GP24TSC0(571):type-LSQ1ACGASC0(572):type-LSD1XP1ES0(573):type-LSD1GP12ES0(574):type-LSQ1SRP12GB0(575):type-LSQ1GV40PSC0(576):type-LSQ1FWBSC1(577):type-LSQ1NSMSC0(578):type-LSQ1NSMSC1(579):type-LSQ1AFDBSC0(580):type-LS81MPUB(581):type-LS81FP48XL(582):type-LS81FT48XL(583):type-LS81GP12XL(584):type-LS81GP24XL(585):type-LS81GP48XL(586):type-LS81GT24XL(587):type-LS81GT48XL(588):type-LS81TGX2XL(589):type-LSQ1GV48SD0(590):type-LSQ1GP48EB0(591):type-LSQ1IPSSC0(592):type-LSQ1GV48SD1(593):type-LSQ1GP48SD0(594):type-LSQ1GP48SD1(595):type-LSQ1SRPA0(596):type-LSQ1SRPA1(597):type-LSQ2FP48SA0(598):type-LSQ2FP48SA1(599):type-LSQ2FT48SA0(600):type-LSQ2FT48SA1(601):type-LSQ1GV24PSC0(602):type-LSQ1GV24PSC1(603):type-LSQ1CGV24PSC0(604):type-LSQ1CGV24PSC1(605):type-LSQ1GP24TEB0(606):type-LSQ1GP24TEB1(607):type-LSQ1GP24TSD0(608):type-LSQ1GP24TSD1(609):type-LSQ1GP24TXSD0(610):type-LSQ1GP24TXSD1(611):type-LSQ1TGX2EB0(612):type-LSQ1TGX2EB1(613):type-LSQ1TGX2SD0(614):type-LSQ1TGX2SD1(615):type-LSQ1TGX4SD0(616):type-LSQ1TGX4SD1(617):type-LSQ1TGX8SD0(618):type-LSQ1TGX8SD1(619):type-LSQ1GP48EB1(620):type-LSQ1TGX4EB0(621):type-LSQ1TGX4EB1(622):type-LSQ1GP12SC3(623):type-LSQ1GP24TSC3(624):type-LSQ1GP48SC3(625):type-LSQ1GV48SC3(626):type-LSQ1MPUA3(627):type-LSQ1SRP1CB3(628):type-LSQ1SRPA3(629):type-LSQ2FP48SA3(630):type-LSQ2FT48SA3(631):type-LSQ1MPUB3(632):type-LSQ1CGP24TSC3(633):type-LSQ1MPUB4(634):type-LSQ1SRPD4(635):type-LSQ1SSLSC0(636):type-LSQ1LBSC0(637):type-LSQ1NAT24SC0(638):type-LSQ1SRP12GB4(639):type-LSQ1TGS8SC0(640):type-LSQ3PT4PSC0(641):type-EWPXM2MPUB0(642):type-EWPXM2SRP12GB0(643):type-EWPXM2SRPD0(644):type-EWPXM2GP24TSD0(645):type-EWPXM2GP24TXSD0(646):type-EWPXM2TGX4SD0(647):type-EWPXM2GP48SD0(648):type-EWPXM2GP24TSC0(649):type-EWPXM2TGX2SC0(650):type-EWPXM2GP48SC0(651):type-LS7500-GP48-SC(652):type-LS7500-GP48-SD(653):type-LS7500-GT48-SC(654):type-LS7500-GT48-SD(655):type-LS7500-SRPG1(656):type-LS7500-SRPG2(657):type-LS7500-XP4-SD(658):type-LS7500-XP8-SD(659):type-LSQ4PT4PSC0(660):type-LSQ4PT8PSC0(661):type-LSQ4PT16PSC0(662):type-LSQ1GP24TSA0(663):type-LSQ1GV24PSA0(664):type-LSQ1SRPD3(665):type-LSQ1SUPA0(666):type-LSU1FAB04A0(667):type-LSU1FAB08A0(668):type-LSU1TGS8EA0(669):type-LSU1TGS8EB0(670):type-LSU1TGS8SE0(671):type-LSUTGS16SC0(672):type-LSU1SUPA0(673):type-LSU1GP24TXEA0(674):type-LSU1GP24TXEB0(675):type-LSU1GP24TXSE0(676):type-LSU1GP48EA0(677):type-LSU1GP48EB0(678):type-LSU1GP48SE0(679):type-LSU1GT48EA0(680):type-LSU1GT48SE0(681):type-LSU1TGX4EA0(682):type-LSU1TGX4EB0(683):type-LSU1TGX4SE0(684):type-LSQ1FAB08A0(685):type-EWPX2WCMD0(686):type-LSQ1WCMD0(687):type-LSQ1IAGSC0(688):type-LSU1GP24TSE0(689):type-LSQ1TGS16SC0(690):type-EWPX2TGS16SC0(691):type-LSQ1SUPA3(692):type-LSQ1FAB04A3(693):type-LSQ1FAB08A3(694):type-LSQ1GT48SC0(695):type-LSR2SRP2C1(696):type-LSR2SRP2C2(697):type-1000BASE-X-COMBO(701):type-EPON-1000M(702):type-1000BASE-FIXED-2SFP-T-2RJ45(703):type-100M-1550-BIDI(704):type-100M-1310-BIDI(705):type-1000BASE-FIXED-4RJ45-4SFP-COMBO(706):type-LSH1PK2T(707):type-LSPM2GP2P(708):type-LSWM1GT16P(709):type-LSWM1GP16P(710):type-LSWM1XP2P(711):type-LSWM1XP4P(712):type-LSWM1SP2P(713):type-LSWM1SP4P(714):type-LSWM148POEM(715):type-LSWM1FW10(716):type-LSWM1WCM10(717):type-LSWM1IPS10(718):type-LSWM1WCM20(719):type-LSPM2SP2P(725):type-LSPM2SP2PA(726):type-LSP5GP8P(727):type-LSP5GT8P(728):type-LSWM1FC4P(729):type-LSW1XGT4P0(730):type-LSW1XGT2P0(731):type-LSP1XGT2P(732):type-LSPM3XGT2P(733):type-LSWM2QP2P(734):type-LSWM2XGT2PM(735):type-LSWM2SP2PM(736):type-LSWM2SP8PM(737):type-LSWM2SP8P(738):type-LSWM2XGT8PM(739):type-WX5002MPU(800):type-LS8M1WCMA(801):type-EWPX1G24XA0(802):type-LSQ1WCMB0(803):type-LSB1WCM2A0(804):type-EWPX1WCMB0(805):type-EWPX1G24XC0(806):type-EWPX1WCMC0(807):type-EWPX1FWA0(808):type-EWPX1G10XC0(809):type-EWPX1WCM10C0(810):type-LSR1WCM2A1(811):type-EWPX1WAP0(812):type-EWPX1WCMD0(813):type-EWPX1G24XCE0(814):type-EWPX1WCMCE0(815):type-LSR1DRSP2L1(900):type-PIC-CLF2G8L(901):type-PIC-CLF4G8L(902):type-SR02SRP2F3(903):type-SR02SRP1F3(904):type-LST1GT48LEA1(905):type-LST1GP48LEA1(906):type-LST2XP8LEA1(907):type-LST1GT48LEY1(908):type-LST1GP48LEY1(909):type-LST1XP32REY1(910):type-LST1XP8LEY1(911):type-LST1GP48LEZ1(912):type-LST1XP8LEZ1(913):type-IM-FW-II(914):type-IM-IPS(915):type-IM-SSL(916):type-IM-LB(917):type-IM-ACG(918):type-LSR1XP16REC1(919):type-LST2XP8LEB1(920):type-LST2XP8LEC1(921):type-LST2XP8LEF1(922):type-LST2XP4LEB1(923):type-LST2XP4LEC1(924):type-LST2XP32REB1(925):type-LST2XP32REC1(926):type-LSR1WCM3A1(927):type-LST1XP16LEB1(928):type-LST1XP16LEC1(929):type-CR-SPC-XP4L-E-I(930):type-LST2MRPNC1(931):type-LST2SF08C1(932):type-LST2SF18C1(933):type-SR02SRP2G3(934):type-CR-SPE-3020-E-I(935):type-CR-SPC-PUP4L-E-I(936):type-CR-SPC-XP4LEF-I(937):type-CR-SPC-XP8LEF-I(938):type-LST3XP8LEB1(939):type-LST3XP8LEC1(940):type-LST1FW3A1(941):type-CR-IM-NAM1A(942):type-LSR2SRP2B1(943):type-LSR2SRP2B2(944):type-LSR2SRP2D1(945):type-LST3XP8LEY1(946):type-LST2XP32REY1(947):type-LST1XP16LEY1(948):type-SR0M2SRP2G3(949):type-SR0M2SRP1G3(950):type-SPC-GP48LA(951):type-SPC-GT48LA(952):type-SPC-XP4LA(953):type-SPC-XP2LA(954):type-SPC-GP24LA(955):type-SPC-XP16RA(956):type-CR-IM-FW1A(957):type-SPC-XP16R(958):type-CR-IM-LB1A(959):type-LST1GT48LEC2(960):type-LST1GP48LEC2(961):type-LST1XP16LEC2(962):type-LST2XP8LEC2(963):type-LST2XP32REC2(964):type-CR-IM-MAC1A(965):type-LST1XP48LFD1(966):type-LST1XP40RFD1(967):type-LST1XP40RFG1(968):type-LST1XLP16RFD1(969):type-LST1CP4RFD1(970):type-LST1CP4RFG1(971):type-LST1SF08E1(972):type-LST1SF18E1(973):type-LST1MRPNE1(974):type-LSX1CGX8FC0(975):type-LSX1CGX8FC1(976):type-LSX1QGS24FC0(977):type-LSX1QGS24FC1(978):type-LSX1TGS24FC0(979):type-LSX1TGS24FC1(980):type-LSX1TGS48FC0(981):type-LSX1TGS48FC1(982):type-LST1XP48LFD2(983):type-LST1XP40RFD2(984):type-LST1XP40RFG2(985):type-LST1XLP16RFD2(986):type-LST1CP4RFD2(987):type-LST1CP4RFG2(988):type-MPE-1004(989):type-MIC-GP4L(990):type-MIC-GP8L(991):type-MIC-SP4L(992):type-MIC-ET16L(993):type-MIC-CLP4L(994):type-MIC-CLP2L(995):type-LST1IPS2A1(996):type-SFC-04B(997):type-SFC-04D(998):type-SFC-08B(999):type-SFC-08D(1000):type-SFC-12B(1001):type-SFC-12D(1002):type-SR05SRP1H1(1003):type-SPC-GP24LA1(1004):type-SPC-GP24XP2LA(1005):type-SPC-GP48LA1(1006):type-SPC-GP48LB(1007):type-SPC-XP2LA1(1008):type-SPC-XP4LA1(1009):type-SPC-XP4LB(1010):type-SPC-XP8LA(1011):type-SPC-XP8LB(1012):type-SPC-XP48LA(1013):type-SPC-XLP8LA(1014):type-SPC-GP24XP2LB(1015):type-LST1MRPNE2(1016):type-LST2FW3A1(1017):type-LST1ADE1A1(1018):type-CR-MRP-II(1019):type-CR-SF08E(1020):type-CR-SF18E(1021):type-CR-SPC-XP40RC(1022):type-CR-SPC-XP40RB(1023):type-CR-SPC-CP4RC(1024):type-LST1FW3C1(1025):type-LSU1FWCEA0(1026):type-SPC-GT48LA1(1027):type-LST1XP20RFD1(1028):type-LST1XP20RFD2(1029):type-MPE-1104(1030):type-SPEX-1204(1031):type-SPC-GP44XP4LCX(1032):type-SPC-GP44XP4LAX(1033):type-SPC-XP24LCX(1034):type-SPC-XP24LAX(1035):type-SPC-XP12LCX(1036):type-SPC-XP12LAX(1037):type-SPC-XLP6LCX(1038):type-SPC-XLP6LAX(1039):type-SPC-CP1LCX(1040):type-SPC-CP1LAX(1041):type-SPC-CP2LB(1042):type-SPC-CP2LA(1043):type-SR05SRP1L1(1044):type-SR05SRP1L3(1045):type-SFC-04-4(1046):type-SFC-04-3(1047):type-SFC-04-2(1048):type-SFC-04-1(1049):type-LST1NSM2C1(1050):type-CR-SPC-XP20RB(1051):type-SR07SRPUA1(1052):type-SR07SRPUB3(1053):type-SR07SRPUC3(1054):type-SR07MPUA1(1055):type-SR07SRPUB1(1056):type-SR07SRPUC1(1057):type-MIC-MS4L(1058):type-SPC-GP44XP4LC(1059):type-SPC-GP44XP4LA(1060):type-SPC-XLP2XP4LC(1061):type-SPC-XP12LC(1062):type-SPC-CP1LC(1063):type-SPC-XP24LC(1064):type-SR07SRPUD3(1065):type-SR07MPUA3(1066):type-MPEX-1304(1067):type-MIC-GP10L1(1068):type-SR07SRPUB(1069):type-CMPE-1104(1070):type-CSFC-04-1(1071):type-CSFC-04-2(1072):type-CSFC-04-3(1073):type-CSFC-04-4(1074):type-CSFC-04B(1075):type-CSFC-04D(1076):type-CSFC-08B(1077):type-CSFC-08D(1078):type-CSFC-12B(1079):type-CSFC-12D(1080):type-CSPC-CP1LCX(1081):type-CSPC-CP2LB(1082):type-CSPC-GP24LA1(1083):type-CSPC-GP24XP2LB(1084):type-CSPC-GP44XP4LCX(1085):type-CSPC-GP48LB(1086):type-CSPC-GT48LA1(1087):type-CSPC-XLP6LCX(1088):type-CSPC-XP2LA1(1089):type-CSPC-XP4LB(1090):type-CSPC-XP8LB(1091):type-CSPC-XP12LAX(1092):type-CSPC-XP12LCX(1093):type-CSPC-XP24LAX(1094):type-CSPC-XP24LCX(1095):type-CSPEX-1204(1096):type-CSR05SRP1L1(1097):type-CSR05SRP1L3(1098):type-CSR07MPUA1(1099):type-CSR07SRPUA1(1100):type-CSR07SRPUB1(1101):type-CSR07SRPUC1(1102):type-LSXM1CGX8FX1(1103):type-LSXM1QGS24FX1(1104):type-LSXM1TGS48FX1(1105):type-LSXM1QGS12FX1(1106):type-LSXM1TGT48FX1(1107):type-LSU1IPSBEA0(1108):type-LSU1QGC4SF0(1201):type-LSU1QGS8SF0(1202):type-LSU1TGS48SF0(1203):type-LSU1QGS4SF0(1204):type-LSU1TGS32SF0(1205):type-LSU1FAB08D0(1206):type-LSU1FAB04B0(1207):type-LSU1FAB08B0(1208):type-LSU1FAB12D0(1209):type-LSU1FAB12B0(1210):type-LSU1FAB04D0(1211):type-LSQ1CTGS16SC0(1212):type-EWPX2CTGS16SC0(1213):type-LSU3WCMD0(1214):type-EWPX3WCMD0(1215):type-LSQ1QGS4SC0(1216):type-LSQ1QGC4SC0(1217):type-LSU1TGT24SF0(1218):type-LSQ1QGS8SC3(1219):type-LSQ1TGS32SC3(1220):type-LSQ1QGS4SC3(1221):type-LSQ1TGS48SC3(1222):type-LSQ1QGC4SC3(1223):type-LSQ1FAB12D3(1224):type-LSQ1FAB08D3(1225):type-LSQ1FAB04D3(1226):type-LSQ1TGS8EB3(1227):type-LSQ1TGT24SC3(1228):type-LSQ1FAB08B0(1229):type-EWPX2CTGS16SC(1230):type-LSU1SUPB0(1231):type-LSQ1GP48SA0(1232):type-LSQ1TGX2SA0(1233):type-LSV1SRPUA1(1234):type-LSV1QGS12SA1(1235):type-LSV1MPUA1(1236):type-LSX1SUP10A0(1237):type-LSX1SUP16A0(1238):type-LSX1SUP10A1(1239):type-LSX1SUP16A1(1240):type-LSX1FAB10B0(1241):type-LSX1FAB16B0(1242):type-LSX1FAB10B1(1243):type-LSX1FAB16B1(1244):type-LSX1QGS16EA0(1245):type-LSX1TGS48EA0(1246):type-LSX1QGS16EA1(1247):type-LSX1TGS48EA1(1248):type-LSU1TGT24SF9(1249):type-LSU1QGS8SF9(1250):type-LSU1QGS4SF9(1251):type-LSU1TGS48SF9(1252):type-LSU1TGS32SF9(1253):type-LSU1FAB08D9(1254):type-LSU1SUPB9(1255):type-LSQ3GV48SC0(1256):type-LSX1QGS12EC1(1257):type-LSX1QGS12EC0(1258):type-LSX1TGS48EC0(1259):type-LSX1TGS48EC1(1260):type-LSX1TGS24EC0(1261):type-LSX1TGS24EC1(1262):type-LSX1FAB10A0(1263):type-LSX1FAB16A1(1264):type-LSX1QGS12FB0(1265):type-LSX1TGS24FB0(1266):type-LSX1TGS48FB0(1267):type-LSX1QGS12EB1(1268):type-LSX1TGS24EB1(1269):type-LSX1FAB10A1(1270):type-LSX1TGS48EB1(1271):type-LSX1GP48EB1(1272):type-LSX1GP48FB0(1273):type-LSX1GT48FC0(1274):type-LSX1GT48FC1(1275):type-LSX1GP48FC0(1276):type-LSX1GP48FC1(1277):type-LSX1QGS12FC0(1278):type-LSX1QGS12FC1(1279):type-LSX2TGS48EA1(1280):type-LSX1CGC4EB1(1281):type-LSX1CGC4EC0(1282):type-LSX1GT48EB1(1283):type-LSX1GT48FB0(1284):type-LSX1FAB16S1(1285):type-LSQ1SUPB3(1286):type-LSU1CGC2SE0(1287):type-LSU1TGS16SF0(1288):type-LSU1TGS8SF0(1289):type-LSQ1TGS4SC0(1290):type-LSU1GT48SE3(1291):type-LSU1GP48SE3(1292):type-LSX1SUP10B0(1293):type-LSX1SUP16B0(1294):type-LSX1SUP10B1(1295):type-LSX1SUP16B1(1296):type-LSQ1CGV24PSC3(1297):type-LSQ1SRPA8(1298):type-LSQ1CGP24TSC8(1299):type-LSQ1CGT24PSC8(1300):type-LSQ1GT24PSA8(1301):type-LSQ1GP24TSA8(1302):type-LSQ1GT48SA8(1303):type-LSQ1GP48SA8(1304):type-LSQ1TGS4SC8(1305):type-LSQ1TGS8SC8(1306):type-LSU1GT24SE3(1307):type-LSU1GP12SE3(1308):type-LSU1GP24SE3(1309):type-LSU1T24XGSE3(1310):type-LSU1P24XGSE3(1311):type-LSU1GP24TSE3(1312):type-LSU1GT40PSE3(1313):type-LSV1TGS24SA1(1314):type-LSV1SRPA1(1315):type-LSV1SRPC1(1316):type-LSX1FAB16S0(1317):type-LSU1WCME0(1318):type-EWPX1WCME0(1319):type-LSU1TGS48SG0(1320):type-LSU1QGS12SG0(1321):type-LSU1GP44TSEC0(1322):type-LSU1TGS24EC0(1323):type-LSU1QGS6EC0(1324):type-LSU1CGC2EC0(1325):type-LSU1CGC2SE9(1326):type-LSXM1QGS24EX1(1327):type-LSXM1QGS24FB0(1328):type-LSVM1QGS12FX1(1329):type-LSVM1TGS24FX1(1330):type-LSVM1QGS6C2FX1(1331):type-LSQ2GP44TSSC0(1332):type-LSQ2GP44TSSC3(1333):type-LSQ2GP24TSSC0(1334):type-LSQ2GP24TSSC3(1335):type-LSQ2GT24PTSSC0(1336):type-LSQ2GT24PTSSC3(1337):type-LSQ2GT24TSSC0(1338):type-LSQ2GT24TSSC3(1339):type-LSQ2GT48SC0(1340):type-LSQ2GT48SC3(1341):type-LSQ2GV48SC0(1342):type-LSQ2GV48SC3(1343):type-LSQ2TGS16SF0(1344):type-LSQ2TGS16SF3(1345):type-LSQ2MPUD0(1346):type-LSQ2MPUD3(1347):type-LSQ2MPUA0(1348):type-LSQ2MPUA3(1349):type-LSU2GP44TSSE0(1350):type-LSU2GP44TSSE3(1351):type-LSU2GP24TSSE0(1352):type-LSU2GP24TSSE3(1353):type-LSU2GT24PTSSE0(1354):type-LSU2GT24PTSSE3(1355):type-LSU2GT24TSSE0(1356):type-LSU2GT24TSSE3(1357):type-LSU2GT48SE0(1358):type-LSU2GT48SE3(1359):type-LSU2GV48SE0(1360):type-LSU2GV48SE3(1361):type-LSU2TGS16SF0(1362):type-LSU2TGS16SF3(1363):type-LSU1MPU06B0(1364):type-LSU1MPU06B3(1365):type-LSU1MPU10C0(1366):type-LSU1MPU10C3(1367):type-LSU1FAB06C0(1368):type-LSU1FAB06C3(1369):type-LSU1FAB10C0(1370):type-LSU1FAB10C3(1371):type-LSXM1SUPA1(1372):type-LSXM1SFF16B1(1373):type-PEX-Common(1400),Slot type. BOM number is recommended.
.1.3.6.1.4.1.11.2.14.11.15.8.35.18.4.3.1.3,HPN-ICF-LSW-DEV-ADM-MIB::hpnicfLswSlotDesc,OCTET,read-write,,current,,Slot description.
.1.3.6.1.4.1.11.2.14.11.15.8.35.18.4.3.1.4,HPN-ICF-LSW-DEV-ADM-MIB::hpnicfLswSlotCpuRatio,Integer32,read-only,,current,,CPU usage of the slot in accuracy of 1%, and the range of value is 1 to 100.
.1.3.6.1.4.1.11.2.14.11.15.8.35.18.4.3.1.5,HPN-ICF-LSW-DEV-ADM-MIB::hpnicfLswSlotPcbVersion,OCTET,read-only,,current,,Hardware version of the board.
.1.3.6.1.4.1.11.2.14.11.15.8.35.18.4.3.1.6,HPN-ICF-LSW-DEV-ADM-MIB::hpnicfLswSlotSoftwareVersion,OCTET,read-only,,current,,Software version of the board.
.1.3.6.1.4.1.11.2.14.11.15.8.35.18.4.3.1.7,HPN-ICF-LSW-DEV-ADM-MIB::hpnicfLswSubslotNumber,Integer32,read-only,,current,,Number of the cards of the board.
.1.3.6.1.4.1.11.2.14.11.15.8.35.18.4.3.1.8,HPN-ICF-LSW-DEV-ADM-MIB::hpnicfLswSlotAdminStatus,INTEGER,read-only,,current,not-install(1):normal(2):fault(3):forbidden(4),Slot status.
.1.3.6.1.4.1.11.2.14.11.15.8.35.18.4.3.1.9,HPN-ICF-LSW-DEV-ADM-MIB::hpnicfLswSlotOperStatus,INTEGER,read-write,,current,disable(1):enable(2):reset(3):test(4),Slot operation status.
.1.3.6.1.4.1.11.2.14.11.15.8.35.18.4.3.1.10,HPN-ICF-LSW-DEV-ADM-MIB::hpnicfLswSlotPhyMemory,Unsigned32,read-only,,current,,The memory of physical on the board. If the amount of physical memory exceeds 4,294,967,295 bytes, the value remains 4,294,967,295 bytes.
.1.3.6.1.4.1.11.2.14.11.15.8.35.18.4.3.1.11,HPN-ICF-LSW-DEV-ADM-MIB::hpnicfLswSlotMemory,Unsigned32,read-only,,current,,The memory of system on the board. Note that the system memory means the memory can be used by the software platform. If the amount of system memory exceeds 4,294,967,295 bytes, the value remains 4,294,967,295 bytes.
.1.3.6.1.4.1.11.2.14.11.15.8.35.18.4.3.1.12,HPN-ICF-LSW-DEV-ADM-MIB::hpnicfLswSlotMemoryUsed,Unsigned32,read-only,,current,,The system memory in use on the board. Note that the system memory means the memory can be used by the software platform. If the amount of used memory exceeds 4,294,967,295 bytes, the value remains 4,294,967,295 bytes.
.1.3.6.1.4.1.11.2.14.11.15.8.35.18.4.3.1.13,HPN-ICF-LSW-DEV-ADM-MIB::hpnicfLswSlotMemoryRatio,Unsigned32,read-only,,current,,The percentage of system memory in use on the board. Note that the system memory means the memory can be used by the software platform.
.1.3.6.1.4.1.11.2.14.11.15.8.35.18.4.3.1.14,HPN-ICF-LSW-DEV-ADM-MIB::hpnicfLswSlotTemperature,Integer32,read-only,,current,,The temperature of system on the board.
.1.3.6.1.4.1.11.2.14.11.15.8.35.18.4.3.1.15,HPN-ICF-LSW-DEV-ADM-MIB::hpnicfLswSlotPktBufFree,Integer32,read-only,,current,,The number of packet buffers available for internal VME transfers or external transfers, respectively. Because switch operations and application software modules impose some overhead on global memory buffers, the number of buffers available for data transfers is less than the total number of buffers allocated when the switch boots.
.1.3.6.1.4.1.11.2.14.11.15.8.35.18.4.3.1.16,HPN-ICF-LSW-DEV-ADM-MIB::hpnicfLswSlotPktBufInit,Integer32,read-only,,current,,The number of packet buffers allocated when the switch booted.
.1.3.6.1.4.1.11.2.14.11.15.8.35.18.4.3.1.17,HPN-ICF-LSW-DEV-ADM-MIB::hpnicfLswSlotPktBufMin,Integer32,read-only,,current,,The smallest number of packet buffers available since the switch booted.
.1.3.6.1.4.1.11.2.14.11.15.8.35.18.4.3.1.18,HPN-ICF-LSW-DEV-ADM-MIB::hpnicfLswSlotPktBufMiss,Counter64,read-only,,current,,The number of times that the switch was unable to obtain a packet buffer. Failure to obtain a buffer indicates that buffers were busy.
.1.3.6.1.4.1.11.2.14.11.15.8.35.18.4.3.1.19,HPN-ICF-LSW-DEV-ADM-MIB::hpnicfLswSlotRunTime,OCTET,read-only,,current,,Runtime of board. For example, if a board has run for 2 days 4 hours and 20 minutes, its runtime is displayed as 0 weeks, 2 days, 4 hours, 20 minutes.
.1.3.6.1.4.1.11.2.14.11.15.8.35.18.4.3.1.20,HPN-ICF-LSW-DEV-ADM-MIB::hpnicfLswSlotPhyMemRev,Counter64,read-only,,current,,Size of the memory on the board. This node is used to replace hpnicfLswSlotPhyMemory.
.1.3.6.1.4.1.11.2.14.11.15.8.35.18.4.3.1.21,HPN-ICF-LSW-DEV-ADM-MIB::hpnicfLswSlotMemRev,Counter64,read-only,,current,,Size of the memory space for the software system on the board. This node is used to replace hpnicfLswSlotMemory. Note that the system memory means the memory can be used by the software platform.
.1.3.6.1.4.1.11.2.14.11.15.8.35.18.4.3.1.22,HPN-ICF-LSW-DEV-ADM-MIB::hpnicfLswSlotMemUsedRev,Counter64,read-only,,current,,Size of the memory space used by the software system on the board. This node is used to replace hpnicfLswSlotMemoryUsed. Note that the system memory means the memory can be used by the software platform.
.1.3.6.1.4.1.11.2.14.11.15.8.35.18.4.3.1.23,HPN-ICF-LSW-DEV-ADM-MIB::hpnicfLswSlotModelDesc,OCTET,read-only,,current,,Model of the extended device in a slot. Examples of extended devices include PEXs and firewall modules. If the device in the slot is not an extended device, a zero-length string is returned.
.1.3.6.1.4.1.11.2.14.11.15.8.35.18.4.4,HPN-ICF-LSW-DEV-ADM-MIB::hpnicfLswSubslotTable,,not-accessible,,current,,Subslot description table.
.1.3.6.1.4.1.11.2.14.11.15.8.35.18.4.4.1,HPN-ICF-LSW-DEV-ADM-MIB::hpnicfLswSubslotEntry,,not-accessible,hpnicfLswFrameIndex:hpnicfLswSlotIndex:hpnicfLswSubslotIndex,current,,Subslot description table entry.
.1.3.6.1.4.1.11.2.14.11.15.8.35.18.4.4.1.1,HPN-ICF-LSW-DEV-ADM-MIB::hpnicfLswSubslotIndex,Integer32,read-only,,current,,Subslot index.
.1.3.6.1.4.1.11.2.14.11.15.8.35.18.4.4.1.2,HPN-ICF-LSW-DEV-ADM-MIB::hpnicfLswSubslotType,INTEGER,read-only,,current,type-NULL(0):type-10OR100M(1):type-1000BASE-LX-SM(2):type-1000BASE-SX-MM(3):type-1000BASE-TX(4):type-100M-SINGLEMODE-FX(5):type-100M-MULTIMODE-FX(6):type-100M-100BASE-TX(7):type-100M-HUB(8):type-VDSL(9):type-STACK(10):type-1000BASE-ZENITH-FX(11):type-1000BASE-LONG-FX(12):type-ADSL(13):type-4T10OR100-4FX100SM(14):type-4T10OR100-4FX100MM(15):type-VSPL(16):type-ASPL(17):type-1000M-SFP(18):type-LS82O2CM(19):type-LS82P2CM(20):type-LS82O4GM(21):type-LS82GB4C(22):type-LS82GT4C(23):type-LS82ST4C(24):bOARD-TYPE-LS82DSPU(25):bOARD-TYPE-LS81GP8U(26):bOARD-TYPE-LS82GT20(27):bOARD-TYPE-LS82FE48(28):type-LS82T24B(29):type-LSB1SRPA(30):type-LSB1FT48A(31):type-LSB1FT48B(32):type-LSB1F48GA(33):type-LSB1F48GB(34):type-LSB1FP20A(35):type-LSB1FP20B(36):type-FT48A(37):type-GP4U(38):type-GP2U(39):type-TGX1A(40):type-1000BASE-LX-SM-IR-SC(41):type-1000BASE-SX-MM-SR-SC(42):type-1000BASE-T-RJ45(43):type-100BASE-FX-SM-IR-SC(44):type-100BASE-FX-MM-SR-SC(45):type-GIGA-STACK-1M-PC(46):type-1000BASE-LX-SM-VLR-LC(47):type-1000BASE-LX-SM-LR-LC(48):type-100BASE-FX-SM-LR-SC(49):type-1000BASE-X-GBIC(50):type-100M-SINGLEMODE-FX-LC(51):type-100M-MULTIMODE-FX-LC(52):type-1000BASE-4SFP(53):type-1000BASE-4GBIC(54):type-1000BASE-FIXED-4SFP(55):type-1000BASE-FIXED-4GBIC(56):type-LSB1GP12A(57):type-LSB1GP12B(58):type-LSB1TGX1A(59):type-LSB1TGX1B(60):type-LSB1P4G8A(61):type-LSB1P4G8B(62):type-LSB1A4G8A(63):type-LSB1A4G8B(64):type-FT48C(65):type-FP20(66):bOARD-TYPE-LS81FT48(67):bOARD-TYPE-LS81GB8U(68):bOARD-TYPE-LS81GT8U(69):bOARD-TYPE-LS81FS24(70):bOARD-TYPE-LS81FM24(71):bOARD-TYPE-LS82GP20(72):type-LSB1SRPB(73):type-LSB1F32GA(74):type-LSB1F32GB(75):type-LSB2FT48A(76):type-LSB2FT48B(77):type-LSB1GT12A(78):type-LSB1GT12B(79):type-PC4U(80):type-FT32A(81):type-GT4U(82):bOARD-TYPE-LS83FP20A(83):bOARD-TYPE-LS82HGMU(84):type-LSB1GP8TB(85):type-LSB1GP8TC(86):type-LSB1GT8PB(87):type-LSB1GT8PC(88):type-LSB1FT48C(89):type-LSB1FP20C(90):type-LSB1F32GC(91):type-LSB1GT12C(92):type-LSB1GP12C(93):type-LSB1P4G8C(94):type-LSB1TGX1C(95):type-LSB1GT24B(96):type-LSB1GT24C(97):type-LSB1GP24B(98):type-LSB1GP24C(99):type-LSB1XP2B(100):type-LSB1XP2C(101):type-LSB1GV48B(102):type-LSB1GV48C(103):type-LSB1SRPC(104):type-LSB1SRP1N0(105):type-LSB1SRP1N1(106):type-LSB1SRP1N2(107):type-GT24(108):type-GP24(109):type-XP2(110):type-GV48(111):type-LSG1GP8U(112):type-LSG1GT8U(113):type-LSG1TG1U(114):type-LSG1TD1U(115):type-LSB2FT48C(116):type-LSB1GT48B(117):type-LSB1GT48C(118):type-LS81GT48(119):type-LS81SRPG0(120):type-LS81SRPG1(121):type-LS81SRPG2(122):type-LS81SRPG3(123):type-SR01SRPUB(125):type-SR01SRPUA(126):type-SR01GP12L(127):type-SR01GP12W(128):type-SR01FT48L(129):type-SR01FT48W(130):type-SR01XK1W(131):type-SR01FP20W(132):type-SR01GT12W(133):type-SR01F32GL(134):type-SR01F32GW(135):type-SR01GT8PL(136):type-SR01GT8PW(137):type-SR01P4G8W(138):type-LSA1FP8U(139):type-LSB1SP4B(140):type-LSB1SP4C(141):type-LSB1UP1B(142):type-LSB1UP1C(143):type-LSB1XP4B(144):type-LSB1XP4C(145):type-SP4(146):type-UP1(147):type-XP4(148):type-LS81VSNP(149):type-LS81T12P(150):type-LS81P12T(151):type-LS81GP8UB(152):type-LS81FT48E(153):type-LS81GP4UB(154):type-LS81GT8UE(155):type-LS81GT48A(156):type-LS81FP48(157):type-LSB1XK1B(158):type-LSB1XK1C(159):type-SR01SRPUC(160):type-SR01SRPUD(161):type-SR01SRPUE(162):type-LSB1SRP1N3(163):type-LSB1VP2B(164):type-LSB1NATB(165):type-LSB1VPNB(166):type-LSGP8P(167):type-LSXK1P(168):type-LSXP2P(169):type-LS81FT48F(170):type-LS81PT8G(171):type-LS81PT4G(172):type-LSSTK24G(173):type-LS82GT20A(174):type-LS82GP20A(175):type-LS81TGX1C(176):type-VP2(177):type-LSA1FB8U(178):type-LS81T12PE(179):type-LS81P12TE(180):type-LSB1SRP2N0(181):type-LSB1SRP2N3(182):type-LSB1GV48DB(183):type-LSB1FW8B(184):type-LSB1IPSEC8B(185):type-LSB1IDSB(186):type-LSB1IPSB(187):type-LSB2FT48CA(188):type-LSB1FP20CA(189):type-LSB1F32GCA(190):type-LSB1P4G8CA(191):type-LSB1GT12CA(192):type-LSB1GT24CA(193):type-LSB1GP12CA(194):type-LSB1GP24CA(195):type-LSB1GT8PCA(196):type-LSB1XP2CA(197):type-LSB1XK1CA(198):type-LSB1XP4CA(199):type-LSB1UP1CA(200):type-LSB1SP4CA(201):type-LSB1VP2CA(202):type-SR01FT48WA(203):type-SR01FP20WA(204):type-SR01F32GWA(205):type-SR01P4G8WA(206):type-SR01GT12WA(207):type-SR01GT24WA(208):type-SR01GP12WA(209):type-SR01GP24WA(210):type-SR01GT8PWA(211):type-SR01XP2WA(212):type-SR01XK1WA(213):type-SR01UP1WA(214):type-SR01SP4WA(215):type-GP8U(216):type-LSEXP1P(217):type-LSEXK1P(218):type-LSEXS1P(219):type-LS81GP48(220):type-LS81GT48B(221):type-LS81T16P(222):type-LS81T32P(223):type-LS81TGX2(224):type-LS81TGX4(225):type-LSB1GV48DA(226):type-SR01GV48VB(227):type-LSB1GT24DB(228):type-LSB1GP24DB(229):type-LSB1GP24DC(230):type-LSB1FW8DB(231):type-LSB1IPSEC8DB(232):type-SR01GT24VB(233):type-SR01GP24VC(234):type-SR01VP2WA(235):type-SR01FW8VB(236):type-SR01IPSEC8VB(237):type-SR01NATL(238):type-SR01VPNL(239):type-LSB1GP24CB(240):type-LSB1GP48DB(241):type-LSB1XP2CB(242):type-XP4L(243):type-LSB1XP4LDB(244):type-LSB1XP4LDC(245):type-AHP4(246):type-LSB1AHP4GCA(247):type-CLP4(248):type-LSB1CLP4GCA(249):type-ET32(250):type-LSB1ET32GCA(251):type-LSB1IDSDB(252):type-LSB1SRP2N1(253):bOARD-TYPE-LS82SRPB(254):bORAD-TYPE-LS83SRPC(255):type-Main(256):type-LSB1SRP2N2(257):type-LSB1NAMB(258):type-RSP2(259):type-LSB1RSP2CA(260):type-SR01XP4LVC(261):type-SR01AHP4GWA(262):type-SR01CLP4GWA(263):type-SR01ET32GWA(264):type-SR01IDSVB(265):type-SR01SRPUF(266):type-SR01NAML(267):type-SR01RSP2WA(268):type-LSPM1XP1P(269):type-LSPM1XP2P(270):type-LSPM1CX2P(271):type-STK-1000BASE-T(272):type-LSB1SRP1M0(300):type-LSB1SRP1M1(301):type-LSB1GP12DB(302):type-LSB1GT12DB(303):type-LSB1XK1DB(304):type-LSB1XP2DB(305):type-LSB1XP2DC(306):type-LSB1GT48LDB(307):type-LSB1XP4TDB(308):type-LSB1XP4TDC(309):type-LSB1RSP2DC(310):type-LSB1VP2DC(311):type-LSB1XP4DB(312):type-LSB1SRP2E0(313):type-LSB1SRP2E1(314):type-LSB1SRP2E2(315):type-LSB1SRP2E3(316):type-SR01SRPUQ(317):type-AHP1(318):type-AHP2(319):type-CLP1(320):type-CLP2(321):type-ET16(322):type-LSB1SRP1NA0(323):type-LSB1SRP1NA1(324):type-LSB1SRP1NA2(325):type-LSB1SRP1NA3(326):type-SR01AHP1GWA(327):type-SR01AHP2GWA(328):type-SR01CLP1GWA(329):type-SR01CLP2GWA(330):type-SR01ET16GWA(331):type-SR01GP12VB(332):type-SR01XK1VB(333):type-SR01XP2VC(334):type-SR01XP4LVB(335):type-SR01SRPUEA(336):type-LSB1SRP1N4(337):type-LSB1SRP1N5(338):type-LSB1SRP1N6(339):type-LSB1SRP1N7(340):type-LSB1SRP2N4(341):type-LSB1SRP2N5(342):type-LSB1SRP2N6(343):type-LSB1SRP2N7(344):type-LSB1SRP1NA4(345):type-LSB1SRP1NA5(346):type-LSB1SRP1NA6(347):type-LSB1SRP1NA7(348):type-LSB2GV48DA(349):type-LSB1RGP2GDB(350):type-LSB1RGP4GDB(351):type-LSB2GP24DB(352):type-LSB2GP24DC(353):type-LSB2GT24DB(354):type-LSB2FW8DB(355):type-LSB2IPSEC8DB(356):type-LSB2GV48DB(357):type-RGP2(358):type-RGP4(359):type-SR02FW8VB(360):type-SR02IPSEC8VB(361):type-LSB2SRP1N0(362):type-LSB2SRP1N1(363):type-LSB2SRP1N2(364):type-LSB2SRP1N3(365):type-LSB2SRP1N4(366):type-LSB2SRP1N5(367):type-LSB2SRP1N6(368):type-LSB2SRP1N7(369):type-SR02SRPUE(370):type-SR01LN1BQH0(371):type-SR01DXP1L(372):type-SR01DGP10L(373):type-SR01DRSP2L(374):type-SR01DRUP1L(375):type-SR01DGP20R(376):type-SR01DPLP8L(377):type-SR01DXP2R(378):type-LSB1FW2A0(379):type-LSB1GP48LDB(380):type-SR01LN1BNA0(381):type-SR01LN2BQH0(382):type-SR01LN2BNA0(383):type-SR01DGT20R(384):type-SR01DPSP4L(385):type-SR01DPUP1L(386):type-SR01DPL2G6L(387):type-SR01DPH2G6L(388):type-SR01DPS2G4L(389):type-SR01DCL1G8L(390):type-SR01DCL2G8L(391):type-SR01DET8G8L(392):type-SR02SRP2E3(393):type-SR02SRP1E3(394):type-SR02SRP1M3(395):type-SR01DQCP4L(396):type-SR01DTCP8L(397):type-LSB1AFC1A0(398):type-LSB1SSL1A0(399):type-IMNAM(400):type-IMNAT(401):type-PICAHP1L(402):type-PICALP4L(403):type-PICCHP4L(404):type-PICCHS1G4L(405):type-PICCLS4G4L(406):type-PICCSP1L(407):type-LSB1ACG1A0(408):type-LST1MRPNC1(409):type-LST1SF18B1(410):type-LST1SF08B1(411):type-LST1GT48LEC1(412):type-LST1GP48LEC1(413):type-LST1XP4LEC1(414):type-LST1XP8LEC1(415):type-LSR1SRP2B1(416):type-LSR1SRP2C1(417):type-LSR1SRP2B2(418):type-LSR1SRP2C2(419):type-LSR1GT24LEC1(420):type-LSR1GP24LEB1(421):type-LSR1GP24LEC1(422):type-LSR1GT48LEB1(423):type-LSR1GT48LEC1(424):type-LSR1GP48LEB1(425):type-LSR1GP48LEC1(426):type-LSR2GV48REB1(427):type-LSR1XP2LEB1(428):type-LSR1XP2LEC1(429):type-LSR1XP4LEB1(430):type-LSR1XP4LEC1(431):type-IMFW(432):type-LSB1LB1A0(433):type-LSB1IPS1A0(434):type-LST1GT48LEB1(435):type-LST1GP48LEB1(436):type-LST1XP4LEB1(437):type-LST1XP8LEB1(438):type-LST1XP32REB1(439):type-LST1XP32REC1(440):type-LSR1FW2A1(441):type-LSR1SSL1A1(442):type-SR01DET32G2L(443):type-LSR1GP24LEF1(444):type-LSR1XP4LEF1(445):type-LSR1LB1A1(446):type-LSR1NSM1A1(447):type-LSR1ACG1A1(448):type-LSR1IPS1A1(449):type-LSR2GP24LEB1(450):type-LSR2GT24LEB1(451):type-LSR2GT48LEB1(452):type-SPC-GP24L(453):type-SPC-GT48L(454):type-SPC-GP48L(455):type-SPC-XP2L(456):type-SPC-XP4L(457):type-SR06SRP2E3(458):type-SPE-2010-E(459):type-SPE-2020-E(460):type-SPC-XP4L-S-SDI(461):type-SPC-GT48L-SDI(462):type-SPC-GP48L-S-SDI(463):type-SR02OPMA0(464):type-LSR1XP16REB1(465):type-LSR1GP48LEF1(466):type-LST1GP48LEF1(467):type-LST1XP8LEF1(468):type-SPE-1010-II(469):type-SPE-1010-E-II(470):type-SPE-1020-II(471):type-SPE-1020-E-II(472):type-LST1FW2A1(473):type-LST1NSM1A1(474):type-LST1LB1A1(475):type-LST1ACG1A1(476):type-LST1IPS1A1(477):type-LSR1DRUP1L1(478):type-LSR1DPUP1L1(479):type-LSR1DPSP4L1(480):type-LSR1DTCP8L1(481):type-LSR1DXP1L1(482):type-LSR1DGP10L1(483):type-LSR1LN1BNL1(484):type-LSR1LN2BL1(485):type-LSR1SRP2D1(486):type-IM-NAT-II(487):type-IM-NAM-II(488):type-CR-MRP-I(489):type-CR-SF18C(490):type-CR-SF08C(491):type-CR-SPC-XP8LEF(492):type-CR-SPC-XP4LEF(493):type-CR-SPC-GP48LEF(494):type-CR-SPC-GT48LEF(495):type-CR-SPE-3020-E(496):type-CR-SPC-PUP4L-E(497):type-LST1SF08C1(498):type-LST1SF18C1(499):type-LS81GP16TM(500):type-LS81VP4C(501):type-LS8M1PT8P0(502):type-LS8M1PT8GB0(503):type-LS8M1PT4GB0(504):type-LS81GP2R(505):type-LS81GP4R(506):type-LS81IPSECA(507):type-LS81FWA(508):type-LS82VSNP(509):type-LSQ1GV48SA(510):type-LSQ1SRPB(511):type-LSQ1SRP2XB(512):type-LSQ1SRP1CB(513):type-LSQ1FV48SA(514):type-LSD1MPUA(515):type-LSD1GP20A0(516):type-LSD1GP20TA0(517):type-LSD1GP36A0(518):type-LSD1GP20XA0(519):type-LSD1GP20EA0(520):type-LSD1GP20RA0(521):type-LSD1GP16A0(522):type-LSD1GT16A0(523):type-LSD1XP2A0(524):type-LSD1EP2A0(525):type-LSD1RP2A0(526):type-LSQ1GV48SC(527):type-LSQ1FP48SA(528):type-LSQ1GP24SC(529):type-LSQ1GT24SC(530):type-LSQ1TGX2SC(531):type-LSQ1GP12EA(532):type-LSQ1TGX1EA(533):type-LSQ1P24XGSC(534):type-LSQ1T24XGSC(535):type-LS81TGX1B(536):type-LSQ1PT4PSC0(537):type-LS81SRPG13(538):type-LS81SRPG14(539):type-LS81SRPG15(540):type-LSQ1GP48SC0(541):type-LSQ1GP12SC0(542):type-LSD1SRPA0(543):type-LSD1SRPB0(544):type-LSD1SRPC0(545):type-LSD1GT16PES0(546):type-LSD1GP24ES0(547):type-LSD1GT24XES0(548):type-LSD1GP24XES0(549):type-LSD1XP2ES0(550):type-LSD1GP48ES0(551):type-LSQ1MPUA0(552):type-LSQ1MPUA1(553):type-LSQ1FWBSC0(554):type-LSQ1PT8PSC0(555):type-LSQ1PT16PSC0(556):type-SA11MPUA0(557):type-SA11MPUB0(558):type-LSQ1AFCBSC0(559):type-LSQ1MPUB0(560):type-LSQ1MPUB1(561):type-LSQ1PT4PSC1(562):type-LSQ1PT8PSC1(563):type-LSQ1PT16PSC1(564):type-LSQ1FP48USA0(565):type-LSQ1FP48USA1(566):type-LSQ1FV48USA0(567):type-LSQ1FV48USA1(568):type-LSQ1SRPD0(569):type-LSQ1CGP24TSC0(570):type-LSQ1GP24TSC0(571):type-LSQ1ACGASC0(572):type-LSD1XP1ES0(573):type-LSD1GP12ES0(574):type-LSQ1SRP12GB0(575):type-LSQ1GV40PSC0(576):type-LSQ1FWBSC1(577):type-LSQ1NSMSC0(578):type-LSQ1NSMSC1(579):type-LSQ1AFDBSC0(580):type-LS81MPUB(581):type-LS81FP48XL(582):type-LS81FT48XL(583):type-LS81GP12XL(584):type-LS81GP24XL(585):type-LS81GP48XL(586):type-LS81GT24XL(587):type-LS81GT48XL(588):type-LS81TGX2XL(589):type-LSQ1GV48SD0(590):type-LSQ1GP48EB0(591):type-LSQ1IPSSC0(592):type-LSQ1GV48SD1(593):type-LSQ1GP48SD0(594):type-LSQ1GP48SD1(595):type-LSQ1SRPA0(596):type-LSQ1SRPA1(597):type-LSQ2FP48SA0(598):type-LSQ2FP48SA1(599):type-LSQ2FT48SA0(600):type-LSQ2FT48SA1(601):type-LSQ1GV24PSC0(602):type-LSQ1GV24PSC1(603):type-LSQ1CGV24PSC0(604):type-LSQ1CGV24PSC1(605):type-LSQ1GP24TEB0(606):type-LSQ1GP24TEB1(607):type-LSQ1GP24TSD0(608):type-LSQ1GP24TSD1(609):type-LSQ1GP24TXSD0(610):type-LSQ1GP24TXSD1(611):type-LSQ1TGX2EB0(612):type-LSQ1TGX2EB1(613):type-LSQ1TGX2SD0(614):type-LSQ1TGX2SD1(615):type-LSQ1TGX4SD0(616):type-LSQ1TGX4SD1(617):type-LSQ1TGX8SD0(618):type-LSQ1TGX8SD1(619):type-LSQ1GP48EB1(620):type-LSQ1TGX4EB0(621):type-LSQ1TGX4EB1(622):type-LSQ1GP12SC3(623):type-LSQ1GP24TSC3(624):type-LSQ1GP48SC3(625):type-LSQ1GV48SC3(626):type-LSQ1MPUA3(627):type-LSQ1SRP1CB3(628):type-LSQ1SRPA3(629):type-LSQ2FP48SA3(630):type-LSQ2FT48SA3(631):type-LSQ1MPUB3(632):type-LSQ1CGP24TSC3(633):type-LSQ1MPUB4(634):type-LSQ1SRPD4(635):type-LSQ1SSLSC0(636):type-LSQ1LBSC0(637):type-LSQ1NAT24SC0(638):type-LSQ1SRP12GB4(639):type-LSQ1TGS8SC0(640):type-LSQ3PT4PSC0(641):type-EWPXM2MPUB0(642):type-EWPXM2SRP12GB0(643):type-EWPXM2SRPD0(644):type-EWPXM2GP24TSD0(645):type-EWPXM2GP24TXSD0(646):type-EWPXM2TGX4SD0(647):type-EWPXM2GP48SD0(648):type-EWPXM2GP24TSC0(649):type-EWPXM2TGX2SC0(650):type-EWPXM2GP48SC0(651):type-LS7500-GP48-SC(652):type-LS7500-GP48-SD(653):type-LS7500-GT48-SC(654):type-LS7500-GT48-SD(655):type-LS7500-SRPG1(656):type-LS7500-SRPG2(657):type-LS7500-XP4-SD(658):type-LS7500-XP8-SD(659):type-LSQ4PT4PSC0(660):type-LSQ4PT8PSC0(661):type-LSQ4PT16PSC0(662):type-LSQ1GP24TSA0(663):type-LSQ1GV24PSA0(664):type-LSQ1SRPD3(665):type-LSQ1SUPA0(666):type-LSU1FAB04A0(667):type-LSU1FAB08A0(668):type-LSU1TGS8EA0(669):type-LSU1TGS8EB0(670):type-LSU1TGS8SE0(671):type-LSUTGS16SC0(672):type-LSU1SUPA0(673):type-LSU1GP24TXEA0(674):type-LSU1GP24TXEB0(675):type-LSU1GP24TXSE0(676):type-LSU1GP48EA0(677):type-LSU1GP48EB0(678):type-LSU1GP48SE0(679):type-LSU1GT48EA0(680):type-LSU1GT48SE0(681):type-LSU1TGX4EA0(682):type-LSU1TGX4EB0(683):type-LSU1TGX4SE0(684):type-LSQ1FAB08A0(685):type-EWPX2WCMD0(686):type-LSQ1WCMD0(687):type-LSQ1IAGSC0(688):type-LSU1GP24TSE0(689):type-LSQ1TGS16SC0(690):type-EWPX2TGS16SC0(691):type-LSQ1SUPA3(692):type-LSQ1FAB04A3(693):type-LSQ1FAB08A3(694):type-LSQ1GT48SC0(695):type-LSR2SRP2C1(696):type-LSR2SRP2C2(697):type-1000BASE-X-COMBO(701):type-EPON-1000M(702):type-1000BASE-FIXED-2SFP-T-2RJ45(703):type-100M-1550-BIDI(704):type-100M-1310-BIDI(705):type-1000BASE-FIXED-4RJ45-4SFP-COMBO(706):type-LSH1PK2T(707):type-LSPM2GP2P(708):type-LSWM1GT16P(709):type-LSWM1GP16P(710):type-LSWM1XP2P(711):type-LSWM1XP4P(712):type-LSWM1SP2P(713):type-LSWM1SP4P(714):type-LSWM148POEM(715):type-LSWM1FW10(716):type-LSWM1WCM10(717):type-LSWM1IPS10(718):type-LSWM1WCM20(719):type-LSPM2SP2P(725):type-LSPM2SP2PA(726):type-LSP5GP8P(727):type-LSP5GT8P(728):type-LSWM1FC4P(729):type-LSW1XGT4P0(730):type-LSW1XGT2P0(731):type-LSP1XGT2P(732):type-LSPM3XGT2P(733):type-LSWM2QP2P(734):type-LSWM2XGT2PM(735):type-LSWM2SP2PM(736):type-LSWM2SP8PM(737):type-LSWM2SP8P(738):type-LSWM2XGT8PM(739):type-WX5002MPU(800):type-LS8M1WCMA(801):type-EWPX1G24XA0(802):type-LSQ1WCMB0(803):type-LSB1WCM2A0(804):type-EWPX1WCMB0(805):type-EWPX1G24XC0(806):type-EWPX1WCMC0(807):type-EWPX1FWA0(808):type-EWPX1G10XC0(809):type-EWPX1WCM10C0(810):type-LSR1WCM2A1(811):type-EWPX1WAP0(812):type-EWPX1WCMD0(813):type-EWPX1G24XCE0(814):type-EWPX1WCMCE0(815):type-LSR1DRSP2L1(900):type-PIC-CLF2G8L(901):type-PIC-CLF4G8L(902):type-SR02SRP2F3(903):type-SR02SRP1F3(904):type-LST1GT48LEA1(905):type-LST1GP48LEA1(906):type-LST2XP8LEA1(907):type-LST1GT48LEY1(908):type-LST1GP48LEY1(909):type-LST1XP32REY1(910):type-LST1XP8LEY1(911):type-LST1GP48LEZ1(912):type-LST1XP8LEZ1(913):type-IM-FW-II(914):type-IM-IPS(915):type-IM-SSL(916):type-IM-LB(917):type-IM-ACG(918):type-LSR1XP16REC1(919):type-LST2XP8LEB1(920):type-LST2XP8LEC1(921):type-LST2XP8LEF1(922):type-LST2XP4LEB1(923):type-LST2XP4LEC1(924):type-LST2XP32REB1(925):type-LST2XP32REC1(926):type-LSR1WCM3A1(927):type-LST1XP16LEB1(928):type-LST1XP16LEC1(929):type-CR-SPC-XP4L-E-I(930):type-LST2MRPNC1(931):type-LST2SF08C1(932):type-LST2SF18C1(933):type-SR02SRP2G3(934):type-CR-SPE-3020-E-I(935):type-CR-SPC-PUP4L-E-I(936):type-CR-SPC-XP4LEF-I(937):type-CR-SPC-XP8LEF-I(938):type-LST3XP8LEB1(939):type-LST3XP8LEC1(940):type-LST1FW3A1(941):type-CR-IM-NAM1A(942):type-LSR2SRP2B1(943):type-LSR2SRP2B2(944):type-LSR2SRP2D1(945):type-LST3XP8LEY1(946):type-LST2XP32REY1(947):type-LST1XP16LEY1(948):type-SR0M2SRP2G3(949):type-SR0M2SRP1G3(950):type-SPC-GP48LA(951):type-SPC-GT48LA(952):type-SPC-XP4LA(953):type-SPC-XP2LA(954):type-SPC-GP24LA(955):type-SPC-XP16RA(956):type-CR-IM-FW1A(957):type-SPC-XP16R(958):type-CR-IM-LB1A(959):type-LST1GT48LEC2(960):type-LST1GP48LEC2(961):type-LST1XP16LEC2(962):type-LST2XP8LEC2(963):type-LST2XP32REC2(964):type-CR-IM-MAC1A(965):type-LST1XP48LFD1(966):type-LST1XP40RFD1(967):type-LST1XP40RFG1(968):type-LST1XLP16RFD1(969):type-LST1CP4RFD1(970):type-LST1CP4RFG1(971):type-LST1SF08E1(972):type-LST1SF18E1(973):type-LST1MRPNE1(974):type-LSX1CGX8FC0(975):type-LSX1CGX8FC1(976):type-LSX1QGS24FC0(977):type-LSX1QGS24FC1(978):type-LSX1TGS24FC0(979):type-LSX1TGS24FC1(980):type-LSX1TGS48FC0(981):type-LSX1TGS48FC1(982):type-LST1XP48LFD2(983):type-LST1XP40RFD2(984):type-LST1XP40RFG2(985):type-LST1XLP16RFD2(986):type-LST1CP4RFD2(987):type-LST1CP4RFG2(988):type-MPE-1004(989):type-MIC-GP4L(990):type-MIC-GP8L(991):type-MIC-SP4L(992):type-MIC-ET16L(993):type-MIC-CLP4L(994):type-MIC-CLP2L(995):type-LST1IPS2A1(996):type-SFC-04B(997):type-SFC-04D(998):type-SFC-08B(999):type-SFC-08D(1000):type-SFC-12B(1001):type-SFC-12D(1002):type-SR05SRP1H1(1003):type-SPC-GP24LA1(1004):type-SPC-GP24XP2LA(1005):type-SPC-GP48LA1(1006):type-SPC-GP48LB(1007):type-SPC-XP2LA1(1008):type-SPC-XP4LA1(1009):type-SPC-XP4LB(1010):type-SPC-XP8LA(1011):type-SPC-XP8LB(1012):type-SPC-XP48LA(1013):type-SPC-XLP8LA(1014):type-SPC-GP24XP2LB(1015):type-LST1MRPNE2(1016):type-LST2FW3A1(1017):type-LST1ADE1A1(1018):type-CR-MRP-II(1019):type-CR-SF08E(1020):type-CR-SF18E(1021):type-CR-SPC-XP40RC(1022):type-CR-SPC-XP40RB(1023):type-CR-SPC-CP4RC(1024):type-LST1FW3C1(1025):type-LSU1FWCEA0(1026):type-SPC-GT48LA1(1027):type-LST1XP20RFD1(1028):type-LST1XP20RFD2(1029):type-MPE-1104(1030):type-SPEX-1204(1031):type-SPC-GP44XP4LCX(1032):type-SPC-GP44XP4LAX(1033):type-SPC-XP24LCX(1034):type-SPC-XP24LAX(1035):type-SPC-XP12LCX(1036):type-SPC-XP12LAX(1037):type-SPC-XLP6LCX(1038):type-SPC-XLP6LAX(1039):type-SPC-CP1LCX(1040):type-SPC-CP1LAX(1041):type-SPC-CP2LB(1042):type-SPC-CP2LA(1043):type-SR05SRP1L1(1044):type-SR05SRP1L3(1045):type-SFC-04-4(1046):type-SFC-04-3(1047):type-SFC-04-2(1048):type-SFC-04-1(1049):type-LST1NSM2C1(1050):type-CR-SPC-XP20RB(1051):type-SR07SRPUA1(1052):type-SR07SRPUB3(1053):type-SR07SRPUC3(1054):type-SR07MPUA1(1055):type-SR07SRPUB1(1056):type-SR07SRPUC1(1057):type-MIC-MS4L(1058):type-SPC-GP44XP4LC(1059):type-SPC-GP44XP4LA(1060):type-SPC-XLP2XP4LC(1061):type-SPC-XP12LC(1062):type-SPC-CP1LC(1063):type-SPC-XP24LC(1064):type-SR07SRPUD3(1065):type-SR07MPUA3(1066):type-MPEX-1304(1067):type-MIC-GP10L1(1068):type-SR07SRPUB(1069):type-CMPE-1104(1070):type-CSFC-04-1(1071):type-CSFC-04-2(1072):type-CSFC-04-3(1073):type-CSFC-04-4(1074):type-CSFC-04B(1075):type-CSFC-04D(1076):type-CSFC-08B(1077):type-CSFC-08D(1078):type-CSFC-12B(1079):type-CSFC-12D(1080):type-CSPC-CP1LCX(1081):type-CSPC-CP2LB(1082):type-CSPC-GP24LA1(1083):type-CSPC-GP24XP2LB(1084):type-CSPC-GP44XP4LCX(1085):type-CSPC-GP48LB(1086):type-CSPC-GT48LA1(1087):type-CSPC-XLP6LCX(1088):type-CSPC-XP2LA1(1089):type-CSPC-XP4LB(1090):type-CSPC-XP8LB(1091):type-CSPC-XP12LAX(1092):type-CSPC-XP12LCX(1093):type-CSPC-XP24LAX(1094):type-CSPC-XP24LCX(1095):type-CSPEX-1204(1096):type-CSR05SRP1L1(1097):type-CSR05SRP1L3(1098):type-CSR07MPUA1(1099):type-CSR07SRPUA1(1100):type-CSR07SRPUB1(1101):type-CSR07SRPUC1(1102):type-LSXM1CGX8FX1(1103):type-LSXM1QGS24FX1(1104):type-LSXM1TGS48FX1(1105):type-LSXM1QGS12FX1(1106):type-LSXM1TGT48FX1(1107):type-LSU1IPSBEA0(1108):type-LSU1QGC4SF0(1201):type-LSU1QGS8SF0(1202):type-LSU1TGS48SF0(1203):type-LSU1QGS4SF0(1204):type-LSU1TGS32SF0(1205):type-LSU1FAB08D0(1206):type-LSU1FAB04B0(1207):type-LSU1FAB08B0(1208):type-LSU1FAB12D0(1209):type-LSU1FAB12B0(1210):type-LSU1FAB04D0(1211):type-LSQ1CTGS16SC0(1212):type-EWPX2CTGS16SC0(1213):type-LSU3WCMD0(1214):type-EWPX3WCMD0(1215):type-LSQ1QGS4SC0(1216):type-LSQ1QGC4SC0(1217):type-LSU1TGT24SF0(1218):type-LSQ1QGS8SC3(1219):type-LSQ1TGS32SC3(1220):type-LSQ1QGS4SC3(1221):type-LSQ1TGS48SC3(1222):type-LSQ1QGC4SC3(1223):type-LSQ1FAB12D3(1224):type-LSQ1FAB08D3(1225):type-LSQ1FAB04D3(1226):type-LSQ1TGS8EB3(1227):type-LSQ1TGT24SC3(1228):type-LSQ1FAB08B0(1229):type-EWPX2CTGS16SC(1230):type-LSU1SUPB0(1231):type-LSQ1GP48SA0(1232):type-LSQ1TGX2SA0(1233):type-LSV1SRPUA1(1234):type-LSV1QGS12SA1(1235):type-LSV1MPUA1(1236):type-LSX1SUP10A0(1237):type-LSX1SUP16A0(1238):type-LSX1SUP10A1(1239):type-LSX1SUP16A1(1240):type-LSX1FAB10B0(1241):type-LSX1FAB16B0(1242):type-LSX1FAB10B1(1243):type-LSX1FAB16B1(1244):type-LSX1QGS16EA0(1245):type-LSX1TGS48EA0(1246):type-LSX1QGS16EA1(1247):type-LSX1TGS48EA1(1248):type-LSU1TGT24SF9(1249):type-LSU1QGS8SF9(1250):type-LSU1QGS4SF9(1251):type-LSU1TGS48SF9(1252):type-LSU1TGS32SF9(1253):type-LSU1FAB08D9(1254):type-LSU1SUPB9(1255):type-LSQ3GV48SC0(1256):type-LSX1QGS12EC1(1257):type-LSX1QGS12EC0(1258):type-LSX1TGS48EC0(1259):type-LSX1TGS48EC1(1260):type-LSX1TGS24EC0(1261):type-LSX1TGS24EC1(1262):type-LSX1FAB10A0(1263):type-LSX1FAB16A1(1264):type-LSX1QGS12FB0(1265):type-LSX1TGS24FB0(1266):type-LSX1TGS48FB0(1267):type-LSX1QGS12EB1(1268):type-LSX1TGS24EB1(1269):type-LSX1FAB10A1(1270):type-LSX1TGS48EB1(1271):type-LSX1GP48EB1(1272):type-LSX1GP48FB0(1273):type-LSX1GT48FC0(1274):type-LSX1GT48FC1(1275):type-LSX1GP48FC0(1276):type-LSX1GP48FC1(1277):type-LSX1QGS12FC0(1278):type-LSX1QGS12FC1(1279):type-LSX2TGS48EA1(1280):type-LSX1CGC4EB1(1281):type-LSX1CGC4EC0(1282):type-LSX1GT48EB1(1283):type-LSX1GT48FB0(1284):type-LSX1FAB16S1(1285):type-LSQ1SUPB3(1286):type-LSU1CGC2SE0(1287):type-LSU1TGS16SF0(1288):type-LSU1TGS8SF0(1289):type-LSQ1TGS4SC0(1290):type-LSU1GT48SE3(1291):type-LSU1GP48SE3(1292):type-LSX1SUP10B0(1293):type-LSX1SUP16B0(1294):type-LSX1SUP10B1(1295):type-LSX1SUP16B1(1296):type-LSQ1CGV24PSC3(1297):type-LSQ1SRPA8(1298):type-LSQ1CGP24TSC8(1299):type-LSQ1CGT24PSC8(1300):type-LSQ1GT24PSA8(1301):type-LSQ1GP24TSA8(1302):type-LSQ1GT48SA8(1303):type-LSQ1GP48SA8(1304):type-LSQ1TGS4SC8(1305):type-LSQ1TGS8SC8(1306):type-LSU1GT24SE3(1307):type-LSU1GP12SE3(1308):type-LSU1GP24SE3(1309):type-LSU1T24XGSE3(1310):type-LSU1P24XGSE3(1311):type-LSU1GP24TSE3(1312):type-LSU1GT40PSE3(1313):type-LSV1TGS24SA1(1314):type-LSV1SRPA1(1315):type-LSV1SRPC1(1316):type-LSX1FAB16S0(1317):type-LSU1WCME0(1318):type-EWPX1WCME0(1319):type-LSU1TGS48SG0(1320):type-LSU1QGS12SG0(1321):type-LSU1GP44TSEC0(1322):type-LSU1TGS24EC0(1323):type-LSU1QGS6EC0(1324):type-LSU1CGC2EC0(1325):type-LSU1CGC2SE9(1326):type-LSXM1QGS24EX1(1327):type-LSXM1QGS24FB0(1328):type-LSVM1QGS12FX1(1329):type-LSVM1TGS24FX1(1330):type-LSVM1QGS6C2FX1(1331):type-LSQ2GP44TSSC0(1332):type-LSQ2GP44TSSC3(1333):type-LSQ2GP24TSSC0(1334):type-LSQ2GP24TSSC3(1335):type-LSQ2GT24PTSSC0(1336):type-LSQ2GT24PTSSC3(1337):type-LSQ2GT24TSSC0(1338):type-LSQ2GT24TSSC3(1339):type-LSQ2GT48SC0(1340):type-LSQ2GT48SC3(1341):type-LSQ2GV48SC0(1342):type-LSQ2GV48SC3(1343):type-LSQ2TGS16SF0(1344):type-LSQ2TGS16SF3(1345):type-LSQ2MPUD0(1346):type-LSQ2MPUD3(1347):type-LSQ2MPUA0(1348):type-LSQ2MPUA3(1349):type-LSU2GP44TSSE0(1350):type-LSU2GP44TSSE3(1351):type-LSU2GP24TSSE0(1352):type-LSU2GP24TSSE3(1353):type-LSU2GT24PTSSE0(1354):type-LSU2GT24PTSSE3(1355):type-LSU2GT24TSSE0(1356):type-LSU2GT24TSSE3(1357):type-LSU2GT48SE0(1358):type-LSU2GT48SE3(1359):type-LSU2GV48SE0(1360):type-LSU2GV48SE3(1361):type-LSU2TGS16SF0(1362):type-LSU2TGS16SF3(1363):type-LSU1MPU06B0(1364):type-LSU1MPU06B3(1365):type-LSU1MPU10C0(1366):type-LSU1MPU10C3(1367):type-LSU1FAB06C0(1368):type-LSU1FAB06C3(1369):type-LSU1FAB10C0(1370):type-LSU1FAB10C3(1371):type-LSXM1SUPA1(1372):type-LSXM1SFF16B1(1373):type-PEX-Common(1400),Type of the pinch board in the subslot.
.1.3.6.1.4.1.11.2.14.11.15.8.35.18.4.4.1.3,HPN-ICF-LSW-DEV-ADM-MIB::hpnicfLswSubslotPortNum,Integer32,read-only,,current,,Number of physical ports in the pinch board.
.1.3.6.1.4.1.11.2.14.11.15.8.35.18.4.4.1.4,HPN-ICF-LSW-DEV-ADM-MIB::hpnicfLswSubslotAdminStatus,INTEGER,read-only,,current,not-install(1):normal(2):fault(3):forbidden(4),Status of the pinch board in the subslot.
.1.3.6.1.4.1.11.2.14.11.15.8.35.18.4.4.1.5,HPN-ICF-LSW-DEV-ADM-MIB::hpnicfLswSubslotFirstIfIndex,Integer32,read-only,,current,,The value of ifIndex of the first physical port in the pinch board.
.1.3.6.1.4.1.11.2.14.11.15.8.35.18.4.5,HPN-ICF-LSW-DEV-ADM-MIB::hpnicfLswPortTable,,not-accessible,,current,,Port configuration table.
.1.3.6.1.4.1.11.2.14.11.15.8.35.18.4.5.1,HPN-ICF-LSW-DEV-ADM-MIB::hpnicfLswPortEntry,,not-accessible,hpnicfLswFrameIndex:hpnicfLswSlotIndex:hpnicfLswSubslotIndex:hpnicfLswPortIndex,current,,Port configuration table entry.
.1.3.6.1.4.1.11.2.14.11.15.8.35.18.4.5.1.1,HPN-ICF-LSW-DEV-ADM-MIB::hpnicfLswPortIndex,Integer32,read-only,,current,,The port number on the device. The first port number is 1, which is reserved if the port does not exist.
.1.3.6.1.4.1.11.2.14.11.15.8.35.18.4.5.1.2,HPN-ICF-LSW-DEV-ADM-MIB::hpnicfLswPortType,INTEGER,read-only,,current,type-NULL(0):type-10OR100M(1):type-1000BASE-LX-SM(2):type-1000BASE-SX-MM(3):type-1000BASE-TX(4):type-100M-SINGLEMODE-FX(5):type-100M-MULTIMODE-FX(6):type-100M-100BASE-TX(7):type-100M-HUB(8):type-VDSL(9):type-STACK(10):type-1000BASE-ZENITH-FX(11):type-1000BASE-LONG-FX(12):type-ADSL(13):type-10OR100M-db(14):type-10GBASE-LR-SM(15):type-10GBASE-LX4-MM(16):type-10GBASE-LX4-SM(17):type-100M-LONG-FX(18):type-1000BASE-CX(19):type-1000BASE-ZENITH-FX-LC(20):type-1000BASE-LONG-FX-LC(21):type-100M-SM-FX-SC(22):type-100M-MM-FX-SC(23):type-100M-SM-FX-LC(24):type-100M-MM-FX-LC(25):type-GBIC-NO-CONNECTOR(26):type-GBIC-1000-BASE-T(27):type-GBIC-1000-BASE-LX(28):type-GBIC-1000-BASE-SX(29):type-GBIC-1000-BASE-ZX(30):type-COMBO-NO-CONNECTOR(31):type-COMBO-1000-BASE-LX(32):type-COMBO-1000-BASE-LX-FIBER(33):type-COMBO-1000-BASE-LX-COPPER(34):type-COMBO-1000-BASE-SX(35):type-COMBO-1000-BASE-SX-FIBER(36):type-COMBO-1000-BASE-SX-COPPER(37):type-COMBO-1000-BASE-ZX(38):type-COMBO-1000-BASE-ZX-FIBER(39):type-COMBO-1000-BASE-ZX-COPPER(40):type-155-POS-SX-MMF(41):type-155-POS-LX-SMF(42):type-1000BASE-T(43):type-1000BASE-SX-SFP(44):type-1000BASE-LX-SFP(45):type-1000BASE-T-AN-SFP(46):type-10GBASE-LX4-XENPAK(47):type-10GBASE-LR-XENPAK(48):type-10GBASE-CX4(49):type-1000BASE-ZX-SFP(50):type-1000BASE-MM-SFP(51):type-100BASE-SX-SFP(52):type-100BASE-LX-SFP(53):type-100BASE-T-AN-SFP(54):type-100BASE-ZX-SFP(55):type-100BASE-MM-SFP(56):type-SFP-NO-CONNECTOR(57):type-SFP-UNKNOWN-CONNECTOR(58):type-POS-NO-CONNECTOR(59):type-10G-BASE-SR(60):type-10G-BASE-ER(61):type-10G-BASE-LX4(62):type-10G-BASE-SW(63):type-10G-BASE-LW(64):type-10G-BASE-EW(65):type-10G-LR-SM-LC(66):type-10G-SR-MM-LC(67):type-10G-ER-SM-LC(68):type-10G-LW-SM-LC(69):type-10G-SW-MM-LC(70):type-10G-EW-SM-LC(71):type-100BASE-SM-MTRJ(72):type-100BASE-MM-MTRJ(73):type-XFP-NO-CONNECTOR(74):type-XFP-10GBASE-SR(75):type-XFP-10GBASE-LR(76):type-XFP-10GBASE-ER(77):type-XFP-10GBASE-SW(78):type-XFP-10GBASE-LW(79):type-XFP-10GBASE-EW(80):type-XFP-10GBASE-CX4(81):type-XFP-10GBASE-LX4(82):type-XFP-UNKNOWN(83):type-XPK-NOCONNECTOR(84):type-XPK-10GBASE-SR(85):type-XPK-10GBASE-LR(86):type-XPK-10GBASE-ER(87):type-XPK-10GBASE-SW(88):type-XPK-10GBASE-LW(89):type-XPK-10GBASE-EW(90):type-XPK-10GBASE-CX4(91):type-XPK-10GBASE-LX4(92):type-XPK-UNKNOWN(93):type-POS-OC48-SR-SM-LC(94):type-POS-OC48-IR-SM-LC(95):type-POS-OC48-LR-SM-LC(96):type-10G-BASE-CX4(97):type-OLT-1000BASE-BX-SFF-SC(98):type-ONU-1000BASE-BX-SFF-SC(99):type-24G-CASCADE(100):type-POS-OC3-SR-MM(101):type-POS-OC3-IR-SM(102):type-POS-OC3-IR-1-SM(103):type-POS-OC3-IR-2-SM(104):type-POS-OC3-LR-SM(105):type-POS-OC3-LR-1-SM(106):type-POS-OC3-LR-2-SM(107):type-POS-OC3-LR-3-SM(108):type-POS-OC12-SR-MM(109):type-POS-OC12-IR-SM(110):type-POS-OC12-IR-1-SM(111):type-POS-OC12-IR-2-SM(112):type-POS-OC12-LR-SM(113):type-POS-OC12-LR-1-SM(114):type-POS-OC12-LR-2-SM(115):type-POS-OC12-LR-3-SM(116):type-POS-OC48-SR-SM(117):type-POS-OC48-IR-SM(118):type-POS-OC48-IR-1-SM(119):type-POS-OC48-IR-2-SM(120):type-POS-OC48-LR-SM(121):type-POS-OC48-LR-1-SM(122):type-POS-OC48-LR-2-SM(123):type-POS-OC48-LR-3-SM(124):type-POS-I-64-1(125):type-POS-I-64-2(126):type-POS-I-64-3(127):type-POS-I-64-5(128):type-POS-S-64-1(129):type-POS-S-64-2(130):type-POS-S-64-3(131):type-POS-S-64-5(132):type-POS-L-64-1(133):type-POS-L-64-2(134):type-POS-L-64-3(135):type-POS-V-64-2(136):type-POS-V-64-3(137):type-100BASE-FX-BIDI(138):type-100BASE-BX10-U-SFP(139):type-100BASE-BX10-D-SFP(140):type-1000BASE-BX10-U-SFP(141):type-1000BASE-BX10-D-SFP(142):type-STK-1000BASE-T(143):type-RPR-PHYPOS-CONNECTOR(144):type-RPR-PHY10GE-CONNECTOR(145):type-RPR-LOGICPOS-CONNECTOR(146):type-RPR-LOGIC10GE-CONNECTOR(147):type-10GBASE-ZR(148):type-TYPE-ERROR-CONNECTOR(149):type-10G-STACK(150):type-155-ATM-SX-MMF(151):type-155-ATM-LX-SMF(152):type-622-ATM-SX-MMF(153):type-622-ATM-LX-SMF(154):type-155-ATM-NO-CONNECTOR(155):type-622-ATM-NO-CONNECTOR(156):type-155-CPOS-E1-NO-CONNECTOR(157):type-155-CPOS-T1-NO-CONNECTOR(158):type-622-CPOS-E1-NO-CONNECTOR(159):type-622-CPOS-T1-NO-CONNECTOR(160):type-155-CPOS-E1-SX-MMF(161):type-155-CPOS-T1-SX-MMF(162):type-155-CPOS-E1-LX-SMF(163):type-155-CPOS-T1-LX-SMF(164):type-622-CPOS-E1-SX-MMF(165):type-622-CPOS-T1-SX-MMF(166):type-622-CPOS-E1-LX-SMF(167):type-622-CPOS-T1-LX-SMF(168):type-E1-CONNECTOR(169):type-T1-CONNECTOR(170):type-1000BASE-STK-SFP(171):type-1000BASE-BIDI-SFP(172):type-1000BASE-CWDM-SFP(173):type-100BASE-BIDI-SFP(174):type-OLT-1000BASE-PX-SFP(175):type-OLT-1000BASE-NO-CONNECTOR(176):type-RPR-PHYGE-CONNECTOR(177):type-RPR-LOGICGE-CONNECTOR(178):type-100M-1550-BIDI(179):type-100M-1310-BIDI(180):type-RPR-PHYOC48-CONNECTOR(181):type-RPR-LOGICOC48-CONNECTOR(182):type-100-1000-BASE-LX-SMF(183):type-10G-ZW-SM-LC(184):type-10G-ZR-SM-LC(185):type-XPK-10GBASE-ZR(186):type-SGMII-100-BASE-LX-SFP(187):type-SGMII-100-BASE-FX-SFP(188):type-WLAN-RADIO(189):type-SFP-PLUS-NO-CONNECTOR(191):type-SFP-PLUS-10GBASE-SR(192):type-SFP-PLUS-10GBASE-LR(193):type-SFP-PLUS-10GBASE-LRM(194):type-SFP-PLUS-10GBASE-Cu(195):type-SFP-PLUS-UNKNOWN(196):type-SFP-PLUS-STACK-CONNECTOR(197):type-POS-L-64-4(198):type-MINISAS-HD-STACK-CONNECTOR(199):type-ONU-1000BASE-PX-SFF(200):type-RS485(201):type-SFP-PLUS-10GBASE-ER(202):type-SFP-PLUS-10GBASE-ZR(203):type-XFP-10GBASE-ZR(204):type-QSFP-PLUS-40GBASE-SR4(205):type-QSFP-PLUS-STACK-CONNECTOR(206):type-QSFP-PLUS-TO-4SFP-PLUS-STACK-CONNECTOR(207):type-SFP-STACK-CONNECTOR(208):type-QSFP-NO-CONNECTOR(209):type-10GBase-T(210):type-CFP-NO-CONNECTOR(211):type-CFP-40GBASE-LR4(212):type-QSFP-PLUS-NO-CONNECTOR(213):type-QSFP-PLUS-40GBASE-LR4(214):type-CFP-40GBASE-SR4(215):type-CFP-100GBASE-LR4(216):type-CFP-100GBASE-SR10(217):type-CXP-100GBASE-SR10(218):type-CXP-NO-CONNECTOR(219):type-TRANSCEIVER-UNKNOWN(220):type-QSFP-PLUS-UNKNOWN(221):type-CFP-UNKNOWN(222):type-QSFP-PLUS-40GBASE-CSR4(223):type-CFP-40GBASE-ER4(224):type-SFP-1000BASE-BIDI(225):type-SFP-PLUS-10GBASE-ZR-DWDM(226):type-QSFP-PLUS-40GBASE-PSM(227):type-SFP-8GFC-SW(228):type-SFP-8GFC-LW(229):type-CXP-100GBASE-AOC(230):type-QSFP-PLUS-ACTIVE-STACK-CONNECTOR(231):type-QSFP-PLUS-TO-4SFP-PLUS-ACTIVE-STACK-CONNECTOR(232),Normally the port type is the same as its card type. When there are different types of ports in one card, use the actual port type.
.1.3.6.1.4.1.11.2.14.11.15.8.35.18.4.5.1.3,HPN-ICF-LSW-DEV-ADM-MIB::hpnicfLswPortIfindex,Integer32,read-only,,current,,The value of ifIndex of the port.
.1.3.6.1.4.1.11.2.14.11.15.8.35.18.4.5.1.4,HPN-ICF-LSW-DEV-ADM-MIB::hpnicfLswPortIsPlugged,INTEGER,read-only,,current,unplugged(0):plugged(1),Port is plugged or not.
.1.3.6.1.4.1.11.2.14.11.15.8.35.18.4.6,HPN-ICF-LSW-DEV-ADM-MIB::hpnicfLswPortLoopbackTable,,not-accessible,,current,,Port loopback test table.
.1.3.6.1.4.1.11.2.14.11.15.8.35.18.4.6.1,HPN-ICF-LSW-DEV-ADM-MIB::hpnicfLswPortLoopbackEntry,,not-accessible,,current,,Port loopback test table entry.
.1.3.6.1.4.1.11.2.14.11.15.8.35.18.4.6.1.1,HPN-ICF-LSW-DEV-ADM-MIB::hpnicfLswPortLoopbackIsSupport,INTEGER,read-only,,current,neither(1):both(2):internalOnly(3):externalOnly(4),The loopback type can be supported by current port.
.1.3.6.1.4.1.11.2.14.11.15.8.35.18.4.6.1.2,HPN-ICF-LSW-DEV-ADM-MIB::hpnicfLswPortLoopbackOperate,INTEGER,read-write,,current,stopRemoteOrLocalLoopBack(0):internalLoopback(1):externalLoopback(2):remoteLoopback(3):localLoopback(4),Port loopback operate type. Read operation not supported.
.1.3.6.1.4.1.11.2.14.11.15.8.35.18.4.6.1.3,HPN-ICF-LSW-DEV-ADM-MIB::hpnicfLswPortLoopbackResult,INTEGER,read-only,,current,testing(0):testok(1):testfailed(2),Loopback test result of the port, used for checking if the test is successful. Only after the testing will the query value on the node make sense.
.1.3.6.1.4.1.11.2.14.11.15.8.35.18.4.6.1.4,HPN-ICF-LSW-DEV-ADM-MIB::hpnicfLswPortLoopbackAutoStopSupport,INTEGER,read-only,,current,support(1):notSupport(2),Whether this port support NEED-MANNUL-NOLOOP mode or not.
.1.3.6.1.4.1.11.2.14.11.15.8.35.18.4.6.1.5,HPN-ICF-LSW-DEV-ADM-MIB::hpnicfLswPortLoopbackRemoteResult,INTEGER,read-write,,current,loopbackTestInit(0):loopbackTesting(1):loopbackTestSuccessed(2):loopbackTestFailed(3):loopbackTestTestAndFailed(4),The remote loopback test result of the port, used for checking if the test is successful. Only after the testing will the query value on the node make sense.
.1.3.6.1.4.1.11.2.14.11.15.8.35.18.4.6.1.6,HPN-ICF-LSW-DEV-ADM-MIB::hpnicfLswPortLoopbackLocalResult,INTEGER,read-write,,current,loopbackTestInit(0):loopbackTesting(1):loopbackTestSuccessed(2):loopbackTestFailed(3):loopbackTestTestAndFailed(4),The local loopback test result of the port, used for checking if the test is successful. Only after the testing will the query value on the node make sense.
.1.3.6.1.4.1.11.2.14.11.15.8.35.18.4.6.1.7,HPN-ICF-LSW-DEV-ADM-MIB::hpnicfLswPortLoopbackInternalResult,INTEGER,read-write,,current,loopbackTestInit(0):loopbackTesting(1):loopbackTestSuccessed(2):loopbackTestFailed(3):loopbackTestTestAndFailed(4),The internal loopback test result of the port, used for checking if the test is successful. Only after the testing will the query value on the node make sense.
.1.3.6.1.4.1.11.2.14.11.15.8.35.18.4.6.1.8,HPN-ICF-LSW-DEV-ADM-MIB::hpnicfLswPortLoopbackExternalResult,INTEGER,read-write,,current,loopbackTestInit(0):loopbackTesting(1):loopbackTestSuccessed(2):loopbackTestFailed(3):loopbackTestTestAndFailed(4),The external loopback test result of the port, used for checking if the test is successful. Only after the testing will the query value on the node make sense.
.1.3.6.1.4.1.11.2.14.11.15.8.35.18.4.7,HPN-ICF-LSW-DEV-ADM-MIB::hpnicfLswFabricTable,,not-accessible,,current,,This table contains the information of fabric.
.1.3.6.1.4.1.11.2.14.11.15.8.35.18.4.7.1,HPN-ICF-LSW-DEV-ADM-MIB::hpnicfLswFabricEntry,,not-accessible,hpnicfLswFrameIndex:hpnicfLswSlotIndex:hpnicfLswSubslotIndex:hpnicfLswFabricChannelIndex,current,,An entry in hpnicfLswFabricTable.
.1.3.6.1.4.1.11.2.14.11.15.8.35.18.4.7.1.1,HPN-ICF-LSW-DEV-ADM-MIB::hpnicfLswFabricChannelIndex,Integer32,not-accessible,,current,,The channel number of fabric.
.1.3.6.1.4.1.11.2.14.11.15.8.35.18.4.7.1.2,HPN-ICF-LSW-DEV-ADM-MIB::hpnicfLswFabricUtilIn,Integer32,read-only,,current,,Ingress utilization of fabric.
.1.3.6.1.4.1.11.2.14.11.15.8.35.18.4.7.1.3,HPN-ICF-LSW-DEV-ADM-MIB::hpnicfLswFabricUtilOut,Integer32,read-only,,current,,Egress utilization of fabric.
.1.3.6.1.4.1.11.2.14.11.15.8.35.18.4.7.1.4,HPN-ICF-LSW-DEV-ADM-MIB::hpnicfLswFabricPeakIn,Integer32,read-only,,current,,Ingress peak of utilization for fabric.
.1.3.6.1.4.1.11.2.14.11.15.8.35.18.4.7.1.5,HPN-ICF-LSW-DEV-ADM-MIB::hpnicfLswFabricPeakInTime,OCTET,read-only,,current,,Ingress peak time of utilization for fabric.
.1.3.6.1.4.1.11.2.14.11.15.8.35.18.4.7.1.6,HPN-ICF-LSW-DEV-ADM-MIB::hpnicfLswFabricPeakOut,Integer32,read-only,,current,,Egress peak of utilization for fabric.
.1.3.6.1.4.1.11.2.14.11.15.8.35.18.4.7.1.7,HPN-ICF-LSW-DEV-ADM-MIB::hpnicfLswFabricPeakOutTime,OCTET,read-only,,current,,Egress peak time of utilization for fabric.
.1.3.6.1.4.1.11.2.14.11.15.8.35.18.4.8,HPN-ICF-LSW-DEV-ADM-MIB::hpnicfLswNetworkHealthMonitor,,,,,,
.1.3.6.1.4.1.11.2.14.11.15.8.35.18.4.9,HPN-ICF-LSW-DEV-ADM-MIB::hpnicfLswExtendModelTable,,not-accessible,,current,,This table contains the extended device models supported by the device. Examples of extended devices include PEXs and firewall modules.
.1.3.6.1.4.1.11.2.14.11.15.8.35.18.4.9.1,HPN-ICF-LSW-DEV-ADM-MIB::hpnicfLswExtendModelEntry,,not-accessible,hpnicfLswExtendModelIndex,current,,This entry contains information about an extended device model.
.1.3.6.1.4.1.11.2.14.11.15.8.35.18.4.9.1.1,HPN-ICF-LSW-DEV-ADM-MIB::hpnicfLswExtendModelIndex,Integer32,not-accessible,,current,,Index of the extended device model.
.1.3.6.1.4.1.11.2.14.11.15.8.35.18.4.9.1.2,HPN-ICF-LSW-DEV-ADM-MIB::hpnicfLswExtendModelDesc,OCTET,read-only,,current,,Extended device model. Examples of extended devices include PEXs and firewall modules.
.1.3.6.1.4.1.11.2.14.12,HP-ICF-OID::hpicfNotifications,,,,,,
.1.3.6.1.4.1.11.2.14.12.1,HP-ICF-OID::hpicfCommonTraps,,,,,,
.1.3.6.1.4.1.11.2.14.12.1.0,HP-ICF-OID::hpicfCommonTrapsPrefix,,,,,,
.1.3.6.1.4.1.11.2.14.12.1.0.1,HP-ICF-CHAIN::hpicfChainAddition,,,,,,********* THIS NOTIFICATION IS DEPRECATED ********* An hpicfChainAddition trap indicates that a new node has been added to the Distributed Management Chain connected to this agent. The hpicfChainId returned is the identifier for the new node. Replaced by Cold Start
.1.3.6.1.4.1.11.2.14.12.1.0.2,HP-ICF-CHAIN::hpicfChainRemoval,,,,,,An hpicfChainRemoval trap indicates that a node has been removed from the Distributed Management Chain connected to this agent. The hpicfChainId returned is the identifier for the node that was removed.
.1.3.6.1.4.1.11.2.14.12.1.0.3,HP-ICF-CHASSIS::hpicfSensorTrap,,,,,,An hpicfSensorTrap indicates that there has been a change of state on one of the sensors in this chassis. The hpicfSensorStatus indicates the new status value for the changed sensor.
.1.3.6.1.4.1.11.2.14.12.1.0.4,HP-ICF-BASIC::hpicfSelfTestTrap,,,,,,An hpicfSelfTestTrap indicates that the agent has detected a non-critical failure. The value of the hpicfSelfTestResultText object describing the failure is sent in the trap. Note that this trap is sent whenever a new failure is detected. An agent should throttle the generation of consecutive hpicfSelfTestTraps so that there is at least a five-second gap between traps of this type. When traps are throttled, they are dropped, not queued for sending at a future time. (Note that 'generating' a trap means sending to all configured recipients.).
.1.3.6.1.4.1.11.2.14.12.1.0.5,HP-ICF-FAULT-FINDER-MIB::hpicfFaultFinderTrap,,,,,,This notification is sent whenever the Fault Finder creates an entry in the hpicfFfLogTable.
.1.3.6.1.4.1.11.2.14.12.2,HP-ICF-OID::hpicf8023RptrTraps,,,,,,
.1.3.6.1.4.1.11.2.14.12.2.0,HP-ICF-OID::hpicf8023RptrTrapsPrefix,,,,,,
.1.3.6.1.4.1.11.2.14.12.2.0.1,HP-ICF-8023-RPTR::hpicfLinkBeatTrap,,,,,,********* THIS NOTIFICATION IS DEPRECATED ********* A hpicfLinkBeatTrap is device type specific to ICF hubs. It signifies that the hub hardware has detected a change of state in a port's link beat status. The current value of the port's link beat status is returned in the PDU. This trap has been deprecated. It is replaced by the hpicfMediaAvailDetectTrap and the hpicfMediaAvailLostTrap.
.1.3.6.1.4.1.11.2.14.12.2.0.2,HP-ICF-8023-RPTR::hpicfPartitionTrap,,,,,,********* THIS NOTIFICATION IS DEPRECATED ********* A hpicfPartitionTrap is device type specific to ICF hubs. It signifies that the hub hardware has detected a change of state in a port's partition status. The current value of the port's partition status is returned in the PDU. This trap has been deprecated. It is replaced by the hpicfPortPartitionTrap and the hpicfPortHealTrap.
.1.3.6.1.4.1.11.2.14.12.2.0.3,HP-ICF-8023-RPTR::hpicfMediaAvailDetectTrap,,,,,,A hpicfMediaAvailDetectTraps is device type specific to ICF hubs. It signifies that the hub hardware has detected an instance of rpMauMediaAvailable for one of the repeater's ports has entered the 'available' state from some other state. Note that this trap is only generated for instances of rpMauMediaAvailable associated with MAUs attached to repeater ports for which the corresponding instance of the hpRptrPtMediaAvailTrapEnable object is equal to 'true'. The previous value of the instance of the rpMauMediaAvailable object that entered the 'active' state is returned in the PDU.
.1.3.6.1.4.1.11.2.14.12.2.0.4,HP-ICF-8023-RPTR::hpicfMediaAvailLostTrap,,,,,,A hpicfMediaAvailLostTraps is device type specific to ICF hubs. It signifies that the hub hardware has detected an instance of rpMauMediaAvailable for one of the repeater's ports that had been in the 'available' state has exited that state. Note that this trap is only generated for instances of rpMauMediaAvailable associated with MAUs attached to repeater ports for which the corresponding instance of the hpRptrPtMediaAvailTrapEnable object is equal to 'true'. The new value of the instance of the rpMauMediaAvailable object that exited the 'active' state is returned in the PDU.
.1.3.6.1.4.1.11.2.14.12.2.0.5,HP-ICF-8023-RPTR::hpicfPortPartitionTrap,,,,,,A hpicfPortPartitionTrap is device type specific to ICF hubs. It signifies that the hub hardware has detected that an instance of rptrPortAutoPartitionState for one of the repeater's ports has changed from the 'notAutoPartitioned' state to the 'autoPartitioned' state. The current value of the instance of the rptrPortAutoPartitionState for the port that auto-partitioned is returned in the PDU.
.1.3.6.1.4.1.11.2.14.12.2.0.6,HP-ICF-8023-RPTR::hpicfPortHealTrap,,,,,,A hpicfPortHealTrap is device type specific to ICF hubs. It signifies that the hub hardware has detected that an instance of rptrPortAutoPartitionState for one of the repeater's ports has changed from the 'autoPartitioned' state to the 'notAutoPartitioned' state. The current value of the instance of the rptrPortAutoPartitionState for the port that healed is returned in the PDU.
.1.3.6.1.4.1.11.2.14.12.3,HP-ICF-OID::hpicfVgRptrTraps,,,,,,
.1.3.6.1.4.1.11.2.14.12.3.0,HP-ICF-OID::hpicfVgRptrTrapsPrefix,,,,,,
.1.3.6.1.4.1.11.2.14.12.3.0.1,HP-ICF-VG-RPTR::hpVgRedundantUplinkTrap,,,,,,An hpVgRedundantUplinkTrap is sent anytime one of the tranceivers being used in a redundant uplink transitions from one of the 'unknown', 'inUse' or 'standby' states to either the 'silent' or 'linkFailure' state. The hpVgXcvrState is the new value of the tranceiver state for the tranceiver that made the transition.
.1.3.6.1.4.1.11.2.14.12.3.0.2,HP-ICF-VG-RPTR::hpVgLossOfActiveTrap,,,,,,An hpVgLossOfActiveTrap is sent whenever an enabled port transitions from the active state to either the inactive or training state. The new value of the port's status is returned in the trap.
.1.3.6.1.4.1.11.2.14.12.4,HP-ICF-OID::hpicfGenRptrTraps,,,,,,
.1.3.6.1.4.1.11.2.14.12.4.0,HP-ICF-OID::hpicfGenRptrTrapsPrefix,,,,,,
.1.3.6.1.4.1.11.2.14.12.4.0.1,HP-ICF-GENERIC-RPTR::hpicfIntrusionTrap,,,,,,The hpicfIntrusionTrap signifies that a port security violation has been detected on a port which has the hubSecPtAlarmEnable flag set to 'enabled'. or hpSecPtrIntrusionResponse set to 'SendTrap'  or 'SendTrapAndDisablePort'. hubIntruderGroup identifies the group containing the port on which this intrusion occurred. hubIntruderPort identifies the port within the group on which this intrusion occurred. hubIntruderAddress contains the souce MAC address of the intruder. hubIntruderType identifies the type of violation that occured: address, training, or both. If the violation is of type 'training', the hubIntruderTrainingViolation object will indicate additional information on the type of violation.
.1.3.6.1.4.1.11.2.14.12.4.0.2,HP-ICF-GENERIC-RPTR::hpicfBackupLinkTrap,,,,,,The hpicfBackupLinkTrap signifies that the primary link for a backup link configuration has failed, and the agent has switched over to using the backup link. The instance of the hpicfBackupLinkState for the backup link configuration that experienced the primary link failure is included in the trap.
.1.3.6.1.4.1.11.2.14.12.5,HP-ICF-OID::hpicfRateLimitTraps,,,,,,
.1.3.6.1.4.1.11.2.14.12.5.0,HP-ICF-OID::hpicfRateLimitTrapsPrefix,,,,,,
.1.3.6.1.4.1.11.2.14.12.5.0.1,HP-ICF-RATE-LIMIT-MIB::hpICMPRateLimitPortNotification,,,,,,This notification indicates limit has exceeded.
.1.3.6.1.4.1.11.2.14.12.6,HP-ICF-OID::hpicfSecLoggingTraps,,,,,,
.1.3.6.1.4.1.11.2.14.12.6.0,HP-ICF-OID::hpicfSecLoggingTrapsPrefix,,,,,,
.1.3.6.1.4.1.11.2.14.13,HP-ICF-OID::hpicfOEMs,,,,,,
.1.3.6.1.4.1.11.2.14.13.1,HP-ICF-OID::hpicfFEHub,,,,,,
.1.3.6.1.4.1.11.2.14.14,HP-ICF-OID::hpicfSyslog,,,,,,
.1.3.6.1.4.1.11.2.14.14.1,HP-ICF-SYSLOG-MIB::hpicfSyslogMIB,,,,,,The MIB module for configuring and  monitoring syslog applications. The HP syslog application sends syslog messages.
.1.3.6.1.4.1.11.2.14.14.1.0,HP-ICF-SYSLOG-MIB::hpicfSyslogNotifications,,,,,,
.1.3.6.1.4.1.11.2.14.14.1.0.1,HP-ICF-SYSLOG-MIB::hpicfSyslogStatusChanged,,,,,,This notification is sent when any of the objects starts [hpicfSyslogOperationsStatus is ''started'' ]. When The value of hpicfSyslogOperationsStatus will be the new status of the syslog application after the change. 
.1.3.6.1.4.1.11.2.14.14.1.1,HP-ICF-SYSLOG-MIB::hpicfSyslogObjects,,,,,,
.1.3.6.1.4.1.11.2.14.14.1.1.1,HP-ICF-SYSLOG-MIB::hpicfSyslogControlTable,,not-accessible,,current,,A table containing the configuration parameters pertaining to the hpicfSyslog applications serviced by an SNMP agent. 
.1.3.6.1.4.1.11.2.14.14.1.1.1.1,HP-ICF-SYSLOG-MIB::hpicfSyslogControlEntry,,not-accessible,hpicfSyslogControlIndex,current,,The configuration parameters pertaining to a syslog application. 
.1.3.6.1.4.1.11.2.14.14.1.1.1.1.1,HP-ICF-SYSLOG-MIB::hpicfSyslogControlIndex,Integer32,not-accessible,,current,,The Index that uniquely identifies the syslog application in the hpicfSyslogControlTable.  The value of the index for a syslog application may not be the same across system reboots. Users and applications will need to determine  the index of a syslog application after system  reboots. Initial implementation allows integers (1..6). 
.1.3.6.1.4.1.11.2.14.14.1.1.1.1.2,HP-ICF-SYSLOG-MIB::hpicfSyslogControlDescr,OCTET,read-create,,current,,A user definable description of the syslog application. This description could be used by syslog management applications e.g. in reports or in user interfaces. For the description to be persistent across reboots, the conceptual row must be in the 'active' state. Also, refer to note in hpicfSyslogControlRowStatus, for additional limitations. 
.1.3.6.1.4.1.11.2.14.14.1.1.1.1.3,HP-ICF-SYSLOG-MIB::hpicfSyslogControlBindAddrType,INTEGER,read-create,,current,unknown(0):ipv4(1):ipv6(2):ipv4z(3):ipv6z(4):dns(16),The type of Internet address which follows in hpicfSyslogControlBindAddr. Currently only IPv4 is supported. 
.1.3.6.1.4.1.11.2.14.14.1.1.1.1.4,HP-ICF-SYSLOG-MIB::hpicfSyslogControlBindAddr,OCTET,read-create,,current,,The specific address the syslog sender will bind to. The format of the address is specified by the corresponding hpicfSyslogControlBindAddrType object. 
.1.3.6.1.4.1.11.2.14.14.1.1.1.1.5,HP-ICF-SYSLOG-MIB::hpicfSyslogControlRowStatus,INTEGER,read-create,,current,active(1):notInService(2):notReady(3):createAndGo(4):createAndWait(5):destroy(6),This object is used to create, modify and delete rows in the hpicfSyslogControlTable. The value of hpicfSyslogControlDescr can be changed when this object is in state ''active'' or in ''notInService''. The other objects in a row can be modified only when the value of this object in the corresponding conceptual row is not ''active''. Thus to modify one or more of the objects in this conceptual row, a. change the row status to ''notInService'', b. change the values of the row c. change the row status to ''active'' The hpicfSyslogControlRowStatus may be changed to ''active'' if all the managed objects in the conceptual row with MAX-ACCESS read-create have been assigned valid values. The information in each conceptual row is only persist across reboots if the row status is 'active'.  
.1.3.6.1.4.1.11.2.14.14.1.1.1.1.6,HP-ICF-SYSLOG-MIB::hpicfSyslogControlBindAddrIsOobm,INTEGER,read-create,,current,true(1):false(2),This object indicates the specific address to which syslog sender will bind is on OOBM interface. This mib object will be applicable only if there is a physical OOBM port on the device. 
.1.3.6.1.4.1.11.2.14.14.1.1.1.1.7,HP-ICF-SYSLOG-MIB::hpicfSyslogControlSmmLog,INTEGER,read-create,,current,enabled(1):disabled(2),This object is applicable for a device with a standby management  enabled, all the log messages from the standby management module(SMM) will be sent to the syslog server. If the value is disabled, the log messages from the standby management module will not be sent to the syslog server. By default, this is disabled.
.1.3.6.1.4.1.11.2.14.14.1.1.1.1.8,HP-ICF-SYSLOG-MIB::hpicfSyslogControlTransportProtocol,INTEGER,read-write,,current,udp(1):tcp(2),The transport used for the connection to the syslog server associated with this row. The default value is UDP.
.1.3.6.1.4.1.11.2.14.14.1.1.1.1.9,HP-ICF-SYSLOG-MIB::hpicfSyslogControlDestinationPort,Unsigned32,read-write,,current,,The port used for the communication to the syslog server associated with this row. The default syslog ports for UDP is 514, the default syslog for TCP is 1470, and will be based on the setting of the TransportProtocol object.
.1.3.6.1.4.1.11.2.14.14.1.1.2,HP-ICF-SYSLOG-MIB::hpicfSyslogOperations,,,,,,
.1.3.6.1.4.1.11.2.14.14.1.1.2.1,HP-ICF-SYSLOG-MIB::hpicfSyslogOperationsMsgsTransmitted,Counter32,read-only,,current,,The number of messages transmitted by the syslog sender. This does not include the messages that could not be queued for transmission by the hpicfSyslog sender. Discontinuities in the value of this counter can occur at re-initialization of the management system, and at other times as indicated by the value of hpicfSyslogOperationsCounterDiscontinuityTime. 
.1.3.6.1.4.1.11.2.14.14.1.1.2.2,HP-ICF-SYSLOG-MIB::hpicfSyslogOperationsMsgsDropped,Counter32,read-only,,current,,The number of messages that could not be queued for transmission by the syslog sender. Discontinuities in the value of this counter can occur at re-initialization of the management system, and at other times as indicated by the value of hpicfSyslogOperationsCounterDiscontinuityTime. 
.1.3.6.1.4.1.11.2.14.14.1.1.2.3,HP-ICF-SYSLOG-MIB::hpicfSyslogOperationsLastMsgTransmittedTime,TimeTicks,read-only,,current,,The value of sysUpTime when the last message was transmitted by the hpicfSyslog sender. If no messages have been transmitted by this syslog application, since the last re-initialization of the local management subsystem, then this object will have a zero value. 
.1.3.6.1.4.1.11.2.14.14.1.1.2.4,HP-ICF-SYSLOG-MIB::hpicfSyslogOperationsStartTime,TimeTicks,read-only,,current,,The value of sysUpTime when this syslog application was started. 
.1.3.6.1.4.1.11.2.14.14.1.1.2.5,HP-ICF-SYSLOG-MIB::hpicfSyslogOperationsLastError,OCTET,read-only,,current,,A description of the last error related to sending a syslog message that was encountered by this syslog application. If no error has been encountered by this syslog application then the value of this object will be a zero-length string. If no error has been encountered by this syslog application since the last re-initialization of the local management subsystem then the value of this object will be a zero-length string. 
.1.3.6.1.4.1.11.2.14.14.1.1.2.6,HP-ICF-SYSLOG-MIB::hpicfSyslogOperationsLastErrorTime,TimeTicks,read-only,,current,,The value of sysUpTime when the last error was encountered. If no error has been encountered by this syslog application since the last re-initialization of the local management subsystem, then this object will have a zero value. 
.1.3.6.1.4.1.11.2.14.14.1.1.2.7,HP-ICF-SYSLOG-MIB::hpicfSyslogOperationsCounterDiscontinuityTime,TimeTicks,read-only,,current,,The value of sysUpTime on the most recent occasion at which any one or more of this syslog application's counters, viz., counters with OID prefix 'hpicfSyslogOperationsMsgsTransmitted' or 'hpicfSyslogOperationsMsgsDropped' suffered a discontinuity. If no such discontinuities have occurred since the last re-initialization of the local management subsystem, then this object will have a zero value. 
.1.3.6.1.4.1.11.2.14.14.1.1.2.8,HP-ICF-SYSLOG-MIB::hpicfSyslogOperationsStatus,INTEGER,read-only,,current,unknown(1):started(2):suspended(3):stopped(4),The status of the syslog application. 
.1.3.6.1.4.1.11.2.14.14.1.1.3,HP-ICF-SYSLOG-MIB::hpicfSyslogPriority,,,,,,
.1.3.6.1.4.1.11.2.14.14.1.1.3.1,HP-ICF-SYSLOG-MIB::hpicfSyslogPriorityFacility,INTEGER,read-write,,current,kern(0):user(1):mail(2):daemon(3):auth(4):syslog(5):lpr(6):news(7):uucp(8):sys9(9):sys10(10):sys11(11):sys12(12):sys13(13):sys14(14):cron(15):local0(16):local1(17):local2(18):local3(19):local4(20):local5(21):local6(22):local7(23),The facility value of this entry. This value will be returned in all syslog message, regardless of the process/daemon that originates the message. 
.1.3.6.1.4.1.11.2.14.14.1.1.3.2,HP-ICF-SYSLOG-MIB::hpicfSyslogPrioritySeverity,INTEGER,read-write,,current,major(0):alert(1):critical(2):error(3):warning(4):notice(5):info(6):debug(7),The severity value of this entry. Used to filter 'event' messages. 
.1.3.6.1.4.1.11.2.14.14.1.1.3.3,HP-ICF-SYSLOG-MIB::hpicfSyslogPriorityDescr,OCTET,read-write,,current,,A textual description of this priority entry. 
.1.3.6.1.4.1.11.2.14.14.1.1.3.4,HP-ICF-SYSLOG-MIB::hpicfSyslogSystemModule,INTEGER,read-write,,current,all-pass(0):vlan(1):ip(2):igmp(3):ipx(4):stp(5):system(6):chassis(7):console(8):ports(9):dhcp(10):download(11):tcp(12):telnet(13):timep(14):tftp(15):xmodem(16):update(17):mgr(18):bridge(19):snmp(20):addrmgr(21):agp(22):fault(23):ldbal(24):garp(25):gvrp(26):cos(27):lacp(28):dhcpr(29):stack(30):dma(31):sntp(32):ieee8021x(33):cdp(34):auth(35):tacacs(36):radius(37):ssh(38):netinet(39):ospf(40):xrrp(41):ssl(42):ipaddrmgr(43):macauth(44):kms(45):pim(46):maclock(47):acl(48):udpf(49):inst-mon(50):udld(51):hpesp(52):lldp(53):connfilt(54):ratelim(55):idm(56):iplock(57):dhcp-snoop(58):vrrp(59):usb(60):licensing(61):loop-protect(62):sflow(63):arp-protect(64):dhcpv6c(65):mtm(66):mld(67):dca(68):qinq(69):autorun(70):ffi(71):wsm(72):dipld(73):hpsm(74):srcip(75):policy(76):oobm(77):trmode(78):ospf3(79):dhcpv6r(80):bgp(81):ufd(82):fips(83):dt(84):dcbx(85):sftp(86):stacking(87):rfs(88):testmode(89):crypto(90):ra-guard(92):securemode(96),A system module value of this entry. Used to filter 'event' messages. 
.1.3.6.1.4.1.11.2.14.14.1.1.4,HP-ICF-SYSLOG-MIB::hpicfSyslogStatistics,,,,,,
.1.3.6.1.4.1.11.2.14.14.1.1.4.1,HP-ICF-SYSLOG-MIB::hpicfSyslogGeneralStatistics,,,,,,
.1.3.6.1.4.1.11.2.14.14.1.1.4.1.1,HP-ICF-SYSLOG-MIB::hpicfSyslogGeneralLogSent,Counter32,read-only,,current,,Number of syslog messages sent by the syslog sender.
.1.3.6.1.4.1.11.2.14.14.1.1.4.1.2,HP-ICF-SYSLOG-MIB::hpicfSyslogGeneralLogRecv,Counter32,read-only,,current,,Number of syslog messages received by the syslog  Server.
.1.3.6.1.4.1.11.2.14.14.1.1.4.1.3,HP-ICF-SYSLOG-MIB::hpicfSyslogGeneralLogRelay,Counter32,read-only,,current,,The number of messages processed by the syslog relay.
.1.3.6.1.4.1.11.2.14.14.1.1.4.1.4,HP-ICF-SYSLOG-MIB::hpicfSyslogGeneralSendError,Counter32,read-only,,current,,Number of syslog messages that failed during the  send process and this failed message will be  buffered for the retransmission process.
.1.3.6.1.4.1.11.2.14.14.1.1.4.1.5,HP-ICF-SYSLOG-MIB::hpicfSyslogGeneralLogResend,Counter32,read-only,,current,,Number of syslog messages re-transmitted successfully.
.1.3.6.1.4.1.11.2.14.14.1.1.4.1.6,HP-ICF-SYSLOG-MIB::hpicfSyslogGeneralResendError,Counter32,read-only,,current,,Number of syslog messages that failed during the  retransmission process.The syslog retransmission  will happen if and only if syslog send failed  while transmitting the buffered syslog messages.
.1.3.6.1.4.1.11.2.14.14.1.1.4.1.7,HP-ICF-SYSLOG-MIB::hpicfSyslogGeneralLogBuffered,Counter32,read-only,,current,,Current number of buffered syslog messages that  are ready to be transmitted. 
.1.3.6.1.4.1.11.2.14.14.1.1.4.2,HP-ICF-SYSLOG-MIB::hpicfSyslogSeverityStatistics,,,,,,
.1.3.6.1.4.1.11.2.14.14.1.1.4.2.1,HP-ICF-SYSLOG-MIB::hpicfSyslogSeverityCounterInfoTable,,not-accessible,,current,, A table containing the syslog severity statistics counter value.
.1.3.6.1.4.1.11.2.14.14.1.1.4.2.1.1,HP-ICF-SYSLOG-MIB::hpicfSyslogSeverityCounterInfoEntry,,not-accessible,hpicfSyslogSeverityTypeIndex,current,, The configuration parameters pertaining to a syslog severity statistics.
.1.3.6.1.4.1.11.2.14.14.1.1.4.2.1.1.1,HP-ICF-SYSLOG-MIB::hpicfSyslogSeverityTypeIndex,Integer32,not-accessible,,current,, The Index that uniquely identifies the syslog severity type.
.1.3.6.1.4.1.11.2.14.14.1.1.4.2.1.1.2,HP-ICF-SYSLOG-MIB::hpicfSyslogSeverityType,INTEGER,read-only,,current,major(0):alert(1):critical(2):error(3):warning(4):notice(5):info(6):debug(7), The severity type for all the syslog messages.
.1.3.6.1.4.1.11.2.14.14.1.1.4.2.1.1.3,HP-ICF-SYSLOG-MIB::hpicfSyslogSeverityCounter,Counter32,read-only,,current,,Number of messages transmitted per severity.
.1.3.6.1.4.1.11.2.14.14.1.1.4.3,HP-ICF-SYSLOG-MIB::hpicfSyslogFacilityStatistics,,,,,,
.1.3.6.1.4.1.11.2.14.14.1.1.4.3.1,HP-ICF-SYSLOG-MIB::hpicfSyslogFacilityCounterInfoTable,,not-accessible,,current,,A table containing the syslog facility statistics counter values.
.1.3.6.1.4.1.11.2.14.14.1.1.4.3.1.1,HP-ICF-SYSLOG-MIB::hpicfSyslogFacilityCounterInfoEntry,,not-accessible,hpicfSyslogfacilityCounterIndex,current,,The configuration parameters pertaining to a syslog facility statistics.
.1.3.6.1.4.1.11.2.14.14.1.1.4.3.1.1.1,HP-ICF-SYSLOG-MIB::hpicfSyslogfacilityCounterIndex,Integer32,not-accessible,,current,, The Index that uniquely identifies the syslog facility.
.1.3.6.1.4.1.11.2.14.14.1.1.4.3.1.1.2,HP-ICF-SYSLOG-MIB::hpicfSyslogfacilityType,INTEGER,read-only,,current,kern(0):user(1):mail(2):daemon(3):auth(4):syslog(5):lpr(6):news(7):uucp(8):sys9(9):sys10(10):sys11(11):sys12(12):sys13(13):sys14(14):cron(15):local0(16):local1(17):local2(18):local3(19):local4(20):local5(21):local6(22):local7(23), The facility type for all the syslog messages.
.1.3.6.1.4.1.11.2.14.14.1.1.4.3.1.1.3,HP-ICF-SYSLOG-MIB::hpicfSyslogfacilityCounter,Counter32,read-only,,current,, Number of syslog messages transmitted per facilty.
.1.3.6.1.4.1.11.2.14.14.1.1.5,HP-ICF-SYSLOG-MIB::hpicfSyslogLogMsgOptions,,,,,,
.1.3.6.1.4.1.11.2.14.14.1.1.5.1,HP-ICF-SYSLOG-MIB::hpicfSyslogClearLog,INTEGER,read-write,,current,true(1):false(2),When the value of this object is set to TRUE, all the log messages will be cleared.  A write operation of FALSE leads to a no operation 
.1.3.6.1.4.1.11.2.14.14.1.1.6,HP-ICF-SYSLOG-MIB::hpicfSyslogServerStatisticsTable,,not-accessible,,current,,A table containing the statistical information pertaining to each syslog server indexed by  hpicfSyslogControlIndex. 
.1.3.6.1.4.1.11.2.14.14.1.1.6.1,HP-ICF-SYSLOG-MIB::hpicfSyslogServerStatisticsEntry,,not-accessible,hpicfSyslogControlIndex,current,,The configuration parameters pertaining to a syslog application. 
.1.3.6.1.4.1.11.2.14.14.1.1.6.1.1,HP-ICF-SYSLOG-MIB::hpicfSyslogServerLogSent,Counter32,read-only,,current,,Number of syslog messages sent by the syslog sender.
.1.3.6.1.4.1.11.2.14.14.1.1.6.1.2,HP-ICF-SYSLOG-MIB::hpicfSyslogServerLogRecv,Counter32,read-only,,current,,Number of syslog messages received by the syslog  Server.
.1.3.6.1.4.1.11.2.14.14.1.1.6.1.3,HP-ICF-SYSLOG-MIB::hpicfSyslogServerLogRelay,Counter32,read-only,,current,,The number of messages processed by the syslog relay.
.1.3.6.1.4.1.11.2.14.14.1.1.6.1.4,HP-ICF-SYSLOG-MIB::hpicfSyslogServerSendError,Counter32,read-only,,current,,Number of syslog messages that failed during the  send process and this failed message will be  buffered for the retransmission process.
.1.3.6.1.4.1.11.2.14.14.1.1.6.1.5,HP-ICF-SYSLOG-MIB::hpicfSyslogServerLogResend,Counter32,read-only,,current,,Number of syslog messages re-transmitted successfully.
.1.3.6.1.4.1.11.2.14.14.1.1.6.1.6,HP-ICF-SYSLOG-MIB::hpicfSyslogServerResendError,Counter32,read-only,,current,,Number of syslog messages that failed during the  retransmission process.The syslog retransmission  will happen if and only if syslog send failed  while transmitting the buffered syslog messages.
.1.3.6.1.4.1.11.2.14.14.1.1.6.1.7,HP-ICF-SYSLOG-MIB::hpicfSyslogServerLogBuffered,Counter32,read-only,,current,,Current number of buffered syslog messages that  are ready to be transmitted. 
.1.3.6.1.4.1.11.2.14.14.1.1.7,HP-ICF-SYSLOG-MIB::hpicfSyslogAlerts,,,,,,
.1.3.6.1.4.1.11.2.14.14.1.1.7.1,HP-ICF-SYSLOG-MIB::hpicfSyslogAlertsTable,,not-accessible,,current,,A table of entries containing configuration information for transmitting alerts in syslog messages.
.1.3.6.1.4.1.11.2.14.14.1.1.7.1.1,HP-ICF-SYSLOG-MIB::hpicfSyslogAlertsEntry,,not-accessible,hpicfSyslogAlertIndex,current,,An entry in the 'hpicfSyslogAlertsTable'.
.1.3.6.1.4.1.11.2.14.14.1.1.7.1.1.1,HP-ICF-SYSLOG-MIB::hpicfSyslogAlertIndex,INTEGER,not-accessible,,current,runningCfgChg(1),The index which uniquely identifies a row in the 'hpicfSyslogAlertsTable'. runningCfgChg - the alert type indicating that a change was made made to the  switch's running configuration.
.1.3.6.1.4.1.11.2.14.14.1.1.7.1.1.2,HP-ICF-SYSLOG-MIB::hpicfSyslogAlertAdminStatus,INTEGER,read-write,,current,enable(1):disable(2),Indicates whether the syslog application is permitted to generate given type of alerts in transmitted syslog messages. Default is disabled.
.1.3.6.1.4.1.11.2.14.14.1.1.7.1.1.3,HP-ICF-SYSLOG-MIB::hpicfSyslogAlertTransmitInterval,Unsigned32,read-write,,current,,Specifies the transmission interval in seconds for sending alerts in syslog messages. Only one syslog message is allowed for transmission within this time interval. Default value is 0, indicating there is no rate limit for alerts transmission.
.1.3.6.1.4.1.11.2.14.14.1.3,HP-ICF-SYSLOG-MIB::hpicfSyslogConformance,,,,,,
.1.3.6.1.4.1.11.2.14.14.1.3.1,HP-ICF-SYSLOG-MIB::hpicfSyslogGroups,,,,,,
.1.3.6.1.4.1.11.2.14.14.1.3.1.1,HP-ICF-SYSLOG-MIB::hpicfSyslogOperationsGroup,,,,,,A collection of objects providing message related statistics.
.1.3.6.1.4.1.11.2.14.14.1.3.1.2,HP-ICF-SYSLOG-MIB::hpicfSyslogControlGroup,,,,,,A collection of objects representing the run time parameters for the syslog applications. 
.1.3.6.1.4.1.11.2.14.14.1.3.1.3,HP-ICF-SYSLOG-MIB::hpicfSyslogPriorityGroup,,,,,,A collection of objects representing the priority groupings of hpicfSyslog messages. 
.1.3.6.1.4.1.11.2.14.14.1.3.1.5,HP-ICF-SYSLOG-MIB::hpicfSyslogNotificationGroup,,,,,,A collection of notifications about the operational state of a syslog application. 
.1.3.6.1.4.1.11.2.14.14.1.3.1.6,HP-ICF-SYSLOG-MIB::hpicfSyslogControlGroupOobm,,,,,,A collection of objects representing the run time parameters for the OOBM aware syslog applications. 
.1.3.6.1.4.1.11.2.14.14.1.3.1.7,HP-ICF-SYSLOG-MIB::hpicfSyslogGeneralStatisticsGroup,,,,,,A collection of objects representing the general statistics counter information.
.1.3.6.1.4.1.11.2.14.14.1.3.1.8,HP-ICF-SYSLOG-MIB::hpicfSyslogSeverityStatisticsGroup,,,,,,A collection of objects representing the severity statistics counter information.
.1.3.6.1.4.1.11.2.14.14.1.3.1.9,HP-ICF-SYSLOG-MIB::hpicfSyslogFacilityStatisticsGroup,,,,,,A collection of objects representing the facility statistics counter information.
.1.3.6.1.4.1.11.2.14.14.1.3.1.10,HP-ICF-SYSLOG-MIB::hpicfSyslogControlGroupSmm,,,,,,A collection of objects representing the log message for the 
.1.3.6.1.4.1.11.2.14.14.1.3.1.11,HP-ICF-SYSLOG-MIB::hpicfSyslogLogMsgOptionsGroup,,,,,,A collection of objects representing the log message information.
.1.3.6.1.4.1.11.2.14.14.1.3.1.12,HP-ICF-SYSLOG-MIB::hpicfSyslogControlTransportGroup,,,,,,A collection of objects representing the run time parameters for the transport applications. 
.1.3.6.1.4.1.11.2.14.14.1.3.1.13,HP-ICF-SYSLOG-MIB::hpicfSyslogServerStatisticsGroup,,,,,,A collection of objects representing the server specific statistics counter information.
.1.3.6.1.4.1.11.2.14.14.1.3.1.14,HP-ICF-SYSLOG-MIB::hpicfSyslogPriorityGroup1,,,,,,A collection of object for syslog priority.
.1.3.6.1.4.1.11.2.14.14.1.3.1.15,HP-ICF-SYSLOG-MIB::hpicfSyslogAlertsGroup,,,,,,A collection of objects representing syslog alerts information.
.1.3.6.1.4.1.11.2.14.14.1.3.2,HP-ICF-SYSLOG-MIB::hpicfSyslogCompliances,,,,,,
.1.3.6.1.4.1.11.2.14.14.1.3.2.1,HP-ICF-SYSLOG-MIB::hpicfSyslogFullCompliance1,,,,,,The compliance statement for SNMP entities which implement the SYSLOG-MIB with support for writable objects and notifications. Such an implementation can be both monitored and configured via SNMP. It can also send notifications about change in the operational status of the syslog application. 
.1.3.6.1.4.1.11.2.14.14.1.3.2.2,HP-ICF-SYSLOG-MIB::hpicfSyslogFullCompliance2,,,,,,The compliance statement for SNMP entities which implement the SYSLOG-MIB with support for writable objects. Such an implementation can be both monitored and configured via SNMP. 
.1.3.6.1.4.1.11.2.14.14.1.3.2.4,HP-ICF-SYSLOG-MIB::hpicfSyslogReadOnlyCompliance1,,,,,,The compliance statement for SNMP entities which implement the hpicfSyslog MIB without support for read-write (i.e. in read-only mode). It can also send notifications about change in the operational status of the syslog application. 
.1.3.6.1.4.1.11.2.14.14.1.3.2.5,HP-ICF-SYSLOG-MIB::hpicfSyslogReadOnlyCompliance2,,,,,,The compliance statement for SNMP entities which implement the hpicfSyslog MIB without support for read-write (i.e. in read-only mode). 
.1.3.6.1.4.1.11.2.14.14.1.3.2.7,HP-ICF-SYSLOG-MIB::hpicfSyslogNotificationCompliance,,,,,,The compliance statement for SNMP entities which implement the SYSLOG-MIB and support only notifications about change in the operational status of a syslog application. 
.1.3.6.1.4.1.11.2.14.14.1.3.2.8,HP-ICF-SYSLOG-MIB::hpicfSyslogFullComplianceOobm,,,,,,The compliance statement for syslog server configuration 
.1.3.6.1.4.1.11.2.14.14.1.3.2.9,HP-ICF-SYSLOG-MIB::hpicfSyslogStatisticsCompliance,,,,,,The compliance statement for SNMP entities which implement the syslog statistics.
.1.3.6.1.4.1.11.2.14.14.1.3.2.10,HP-ICF-SYSLOG-MIB::hpicfSyslogSmmLogMsgCompliance,,,,,,The compliance statement for syslog log messages for standby module.
.1.3.6.1.4.1.11.2.14.14.1.3.2.11,HP-ICF-SYSLOG-MIB::hpicfSyslogTransportCompliance,,,,,,The compliance statement for syslog transport .
.1.3.6.1.4.1.11.2.14.14.1.3.2.12,HP-ICF-SYSLOG-MIB::hpicfSyslogPriorityCompliance,,,,,,The compliance statement for syslog priority .
.1.3.6.1.4.1.11.2.14.14.1.3.2.14,HP-ICF-SYSLOG-MIB::hpicfSyslogAlertsCompliance,,,,,,The compliance statement for syslog alerts.
.1.3.6.1.4.1.11.2.36,SEMI-MIB::hpWebMgmt,,,,,,
.1.3.6.1.4.1.11.2.36.1,SEMI-MIB::hpHttpMgMod,,,,,,Management information for HP devices. This MIB provides SNMP  systems asset and HTTP management information, as well as  entity relationship information for host based implementations. This version contains additions for SEMI
.1.3.6.1.4.1.11.2.36.1.0,SEMI-MIB::hpHttpMgTraps,,,,,,
.1.3.6.1.4.1.11.2.36.1.0.1,SEMI-MIB::hpHttpMgHealthTrap,,,,,,Sent whenever hpHttpMgHealth changes state.
.1.3.6.1.4.1.11.2.36.1.0.2,SEMI-MIB::hpHttpMgShutdown,,,,,,Sent when the agent is about to shut down.
.1.3.6.1.4.1.11.2.36.1.0.3,SEMI-MIB::hpHttpMgUnknownHealthTrap,,,,,,The device's health has changed to unknown.
.1.3.6.1.4.1.11.2.36.1.0.4,SEMI-MIB::hpHttpMgOKHealthTrap,,,,,,The device's health has changed to OK.
.1.3.6.1.4.1.11.2.36.1.0.5,SEMI-MIB::hpHttpMgWarningHealthTrap,,,,,,The device's health has changed to warning.
.1.3.6.1.4.1.11.2.36.1.0.6,SEMI-MIB::hpHttpMgCriticalHealthTrap,,,,,,The device's health has changed to critical.
.1.3.6.1.4.1.11.2.36.1.0.7,SEMI-MIB::hpHttpMgNonRecoverableHealthTrap,,,,,,The device's health has changed to Non-Recoverable.
.1.3.6.1.4.1.11.2.36.1.0.8,SEMI-MIB::hpHttpMgDeviceAddedTrap,,,,,,Sent whenever a device is added to the mib.
.1.3.6.1.4.1.11.2.36.1.0.9,SEMI-MIB::hpHttpMgDeviceRemovedTrap,,,,,,Sent whenever a device is removed from the mib.
.1.3.6.1.4.1.11.2.36.1.0.10,SEMI-MIB::hpHttpMgDeviceSpecificEventCode,OCTET,read-write,,current,,Device specific event error code.
.1.3.6.1.4.1.11.2.36.1.0.11,SEMI-MIB::hpHttpMgDeviceSpecificFRU,OCTET,read-write,,current,,Device specific FRU identifier
.1.3.6.1.4.1.11.2.36.1.1,SEMI-MIB::hpHttpMgObjects,,,,,,
.1.3.6.1.4.1.11.2.36.1.1.1,SEMI-MIB::hpHttpMgDefaults,,,,,,
.1.3.6.1.4.1.11.2.36.1.1.1.1,SEMI-MIB::hpHttpMgDefaultURL,OCTET,read-write,,current,,A Uniform Resource Locator (URL), as defined in RFC1738, for the default management information for this device.  This URL is typically used by a HTTP browser to display  management information for this device. This default  page should contain links to any other management pages for this device.
.1.3.6.1.4.1.11.2.36.1.1.2,SEMI-MIB::hpHttpMgNetCitizen,,,,,,
.1.3.6.1.4.1.11.2.36.1.1.2.1,SEMI-MIB::hpHttpMgMgmtSrvrURL,OCTET,read-write,,deprecated,,URL of management server for this device. 
.1.3.6.1.4.1.11.2.36.1.1.2.2,SEMI-MIB::hpHttpMgID,OCTET,read-only,,deprecated,,Unique identifier for this entity. This ID
.1.3.6.1.4.1.11.2.36.1.1.2.3,SEMI-MIB::hpHttpMgHealth,INTEGER,read-only,,deprecated,unknown(1):information(2):ok(3):warning(4):critical(5):nonrecoverable(6),Operating status of this entity.
.1.3.6.1.4.1.11.2.36.1.1.2.4,SEMI-MIB::hpHttpMgManufacturer,OCTET,read-only,,deprecated,,Manufacturer of the hardware for this entity e.g. 'Hewlett-Packard'.
.1.3.6.1.4.1.11.2.36.1.1.2.5,SEMI-MIB::hpHttpMgProduct,OCTET,read-only,,deprecated,,Manufacturer's product number for this entity, e.g. 'D1234A'.
.1.3.6.1.4.1.11.2.36.1.1.2.6,SEMI-MIB::hpHttpMgVersion,OCTET,read-only,,deprecated,,Version number of this entity, e.g. 'A.00.01'. Where several version numbers are available,  this represents the software version.
.1.3.6.1.4.1.11.2.36.1.1.2.7,SEMI-MIB::hpHttpMgHWVersion,OCTET,read-only,,deprecated,,Version number of the hardware for this entity, e.g. 'A.00.01'.
.1.3.6.1.4.1.11.2.36.1.1.2.8,SEMI-MIB::hpHttpMgROMVersion,OCTET,read-only,,deprecated,,Version number of ROM for this entity, e.g.
.1.3.6.1.4.1.11.2.36.1.1.2.9,SEMI-MIB::hpHttpMgSerialNumber,OCTET,read-write,,deprecated,,Serial number of entity. It is recommended
.1.3.6.1.4.1.11.2.36.1.1.2.10,SEMI-MIB::hpHttpMgAssetNumber,OCTET,read-write,,deprecated,,Asset number of entity. This is not normally
.1.3.6.1.4.1.11.2.36.1.1.2.11,SEMI-MIB::hpHttpMgPhone,OCTET,read-write,,deprecated,,Phone number of contact person for this
.1.3.6.1.4.1.11.2.36.1.1.3,SEMI-MIB::hpHttpMgEntityNetInfo,,,,,,
.1.3.6.1.4.1.11.2.36.1.1.3.1,SEMI-MIB::hpHttpMgEntityNetInfoTable,,not-accessible,,current,,A table of EntityRelationships, connection type, URLs, IPAddress etc. This table typcially contains relationships between devices that each have their own management agent. 
.1.3.6.1.4.1.11.2.36.1.1.3.1.1,SEMI-MIB::hpHttpMgEntityNetInfoEntry,,not-accessible,hpHttpMgEntityNetInfoIndex,current,,Information describing EntityRelationships, URLs, IPAddresses etc.
.1.3.6.1.4.1.11.2.36.1.1.3.1.1.1,SEMI-MIB::hpHttpMgEntityNetInfoIndex,Integer32,read-only,,current,,The EntityRelationship Entity Index.
.1.3.6.1.4.1.11.2.36.1.1.3.1.1.2,SEMI-MIB::hpHttpMgEntityNetInfoSysObjID,OCTET,read-only,,current,,Sys Object ID of this entity.
.1.3.6.1.4.1.11.2.36.1.1.3.1.1.3,SEMI-MIB::hpHttpMgEntityNetInfoRelationshipType,INTEGER,read-only,,current,self(0):containedEntity(1):containingEntity(2):externallyAttachedEntity(3):indirectlyAttachedEntity(4):clusterNode(5),Specifies the type of relationship this entry has to this entity.
.1.3.6.1.4.1.11.2.36.1.1.3.1.1.4,SEMI-MIB::hpHttpMgEntityNetInfoUniqueID,OCTET,read-only,,current,,This represents a globally unique ID for the device.  This MUST be the ordered combination of the Manufacturer,  product name, AND any other text that is necessary to guarantee  global uniqueness. This ID must not change even if the referenced entity is moved. e.g. HPD1234A9482882
.1.3.6.1.4.1.11.2.36.1.1.3.1.1.5,SEMI-MIB::hpHttpMgEntityNetInfoURL,OCTET,read-only,,current,,Home Page URL of entity corresponding to this entry. This field may only contain the DNS name of a managed system, in which case the actual URL must be determined from this managed system.
.1.3.6.1.4.1.11.2.36.1.1.3.1.1.6,SEMI-MIB::hpHttpMgEntityNetInfoURLLabel,OCTET,read-only,,current,,Label that a managaement application should use for the hyperlink  to the entity's URL.
.1.3.6.1.4.1.11.2.36.1.1.3.1.1.7,SEMI-MIB::hpHttpMgEntityNetInfoIPAddress,OCTET,read-only,,current,,Addressing information for one of the IP Addresses of the entity  corresponding to this entry.
.1.3.6.1.4.1.11.2.36.1.1.4,SEMI-MIB::hpHttpMgCluster,,,,,,
.1.3.6.1.4.1.11.2.36.1.1.4.1,SEMI-MIB::hpHttpMgClusterName,OCTET,read-only,,current,,The name of the cluster that this system is a member of,  or blank if this system is not a member of a cluster.
.1.3.6.1.4.1.11.2.36.1.1.5,SEMI-MIB::hpHttpMgDeviceInfo,,,,,,
.1.3.6.1.4.1.11.2.36.1.1.5.1,SEMI-MIB::hpHttpMgDeviceTable,,not-accessible,,current,,A list of HP devices under a single SNMP agent.
.1.3.6.1.4.1.11.2.36.1.1.5.1.1,SEMI-MIB::hpHttpMgDeviceEntry,,not-accessible,hpHttpMgDeviceIndex,current,,A device entry containing objects for a particular device.
.1.3.6.1.4.1.11.2.36.1.1.5.1.1.1,SEMI-MIB::hpHttpMgDeviceIndex,Integer32,read-only,,current,,The unique device identification within the  instance of this Mib.
.1.3.6.1.4.1.11.2.36.1.1.5.1.1.2,SEMI-MIB::hpHttpMgDeviceGlobalUniqueID,OCTET,read-only,,current,,This represents a globally unique ID for the device.  This MUST be the ordered combination of the Manufacturer,  product name, AND any other text that is necessary to guarantee  global uniqueness. This value may not be null. e.g. HPD1234A9482882
.1.3.6.1.4.1.11.2.36.1.1.5.1.1.3,SEMI-MIB::hpHttpMgDeviceHealth,INTEGER,read-only,,current,unknown(1):unused(2):ok(3):warning(4):critical(5):nonrecoverable(6),Overall health of the device. The goal of this object is to be the single poll point to check the status of the  device.
.1.3.6.1.4.1.11.2.36.1.1.5.1.1.4,SEMI-MIB::hpHttpMgDeviceSysObjID,OCTET,read-only,,current,,System Object ID for this Device entity. This should be an ASCII integer format. (i.e. 1.3.6.1.4.1.11.2.36.1.1)  The value may not be null.
.1.3.6.1.4.1.11.2.36.1.1.5.1.1.5,SEMI-MIB::hpHttpMgDeviceManagementURL,OCTET,read-write,,current,,This object contains the URL for the device's management  software. If it does not exist the value is empty string.  retained across boots.
.1.3.6.1.4.1.11.2.36.1.1.5.1.1.6,SEMI-MIB::hpHttpMgDeviceManagementURLLabel,OCTET,read-write,,current,,The label that a management application should use for the  hyperlink to the entity's URL.
.1.3.6.1.4.1.11.2.36.1.1.5.1.1.7,SEMI-MIB::hpHttpMgDeviceManufacturer,OCTET,read-only,,current,,The device's manufacturer name. For Hewlett Packard branded equipment this value MUST be 'HP'
.1.3.6.1.4.1.11.2.36.1.1.5.1.1.8,SEMI-MIB::hpHttpMgDeviceProductName,OCTET,read-only,,current,,The device's product name. Null is NOT a valid value. (i.e. D1234A)
.1.3.6.1.4.1.11.2.36.1.1.5.1.1.9,SEMI-MIB::hpHttpMgDeviceProductCaption,OCTET,read-only,,current,,The device's product caption name.  (i.e. HP Multi-stack Disk Array)
.1.3.6.1.4.1.11.2.36.1.1.5.1.1.10,SEMI-MIB::hpHttpMgDeviceSerialNumber,OCTET,read-only,,current,,The serial number for the device. This can return a NULL string.
.1.3.6.1.4.1.11.2.36.1.1.5.1.1.11,SEMI-MIB::hpHttpMgDeviceVersion,OCTET,read-only,,current,,Version number for this device.
.1.3.6.1.4.1.11.2.36.1.1.5.1.1.12,SEMI-MIB::hpHttpMgDeviceHWVersion,OCTET,read-only,,current,,Version number for this device's hardware.
.1.3.6.1.4.1.11.2.36.1.1.5.1.1.13,SEMI-MIB::hpHttpMgDeviceROMVersion,OCTET,read-only,,current,,Version number for this device's ROM.
.1.3.6.1.4.1.11.2.36.1.1.5.1.1.14,SEMI-MIB::hpHttpMgDeviceAssetNumber,OCTET,read-write,,current,,Asset number for the device.
.1.3.6.1.4.1.11.2.36.1.1.5.1.1.15,SEMI-MIB::hpHttpMgDeviceContactPerson,OCTET,read-write,,current,,Identifies the name of the person responsible for the operation of this device. If write is not supported then return invalid.
.1.3.6.1.4.1.11.2.36.1.1.5.1.1.16,SEMI-MIB::hpHttpMgDeviceContactPhone,OCTET,read-write,,current,,Phone number of the contact person for this device.
.1.3.6.1.4.1.11.2.36.1.1.5.1.1.17,SEMI-MIB::hpHttpMgDeviceContactEmail,OCTET,read-write,,current,,e-mail address of the contact person for this device.
.1.3.6.1.4.1.11.2.36.1.1.5.1.1.18,SEMI-MIB::hpHttpMgDeviceContactPagerNumber,OCTET,read-write,,current,,Pager number of the contact person for this device.
.1.3.6.1.4.1.11.2.36.1.1.5.1.1.19,SEMI-MIB::hpHttpMgDeviceLocation,OCTET,read-write,,current,,Identifies the location for the this device. If  write is not supported then return invalid.
.1.3.6.1.4.1.11.2.36.1.1.5.1.1.20,SEMI-MIB::hpHttpMgDeviceRackId,OCTET,read-write,,current,,Identifies the name given by the administrator to identify a  particular rack such a rack 4a or SAP 2 for example.
.1.3.6.1.4.1.11.2.36.1.1.5.1.1.21,SEMI-MIB::hpHttpMgDeviceRackPosition,OCTET,read-write,,current,,Identifies the location such as top, middle or bottom or a  number such a 1st from top etc. to identify the placement  of a device in a rack.
.1.3.6.1.4.1.11.2.36.1.1.5.1.1.22,SEMI-MIB::hpHttpMgDeviceRelationshipType,INTEGER,read-only,,current,host(1):other(2),Indicates the relationship of this device to the SNMP agent. Host indicates that this device owns the SNMP agent.
.1.3.6.1.4.1.11.2.36.1.2,SEMI-MIB::hpHttpMgGroups,,,,,,
.1.3.6.1.4.1.11.2.36.1.2.1,SEMI-MIB::hpHttpMgDefaultGroup,,,,,,The objects providing information applicable to all http manageable systems
.1.3.6.1.4.1.11.2.36.1.2.2,SEMI-MIB::hpHttpMgBasicNetCitizenGroup,,,,,,Additional HP NetCitizen objects
.1.3.6.1.4.1.11.2.36.1.2.3,SEMI-MIB::hpHttpMgBasicNetCitizenTrapGroup,,,,,,HP NetCitizen notifications
.1.3.6.1.4.1.11.2.36.1.2.4,SEMI-MIB::hpHttpMgExtendedNetCitizenGroup,,,,,,Additional HP NetCitizen objects
.1.3.6.1.4.1.11.2.36.1.2.5,SEMI-MIB::hpHttpMgExtendedNetCitizenTrapGroup,,,,,,HP NetCitizen notifications
.1.3.6.1.4.1.11.2.36.1.2.6,SEMI-MIB::hpHttpMgEntityRelationshipGroup,,,,,,NetCitizen entitly-relationship table
.1.3.6.1.4.1.11.2.36.1.2.7,SEMI-MIB::hpHttpMgClusterGroup,,,,,,Cluster objects
.1.3.6.1.4.1.11.2.36.1.2.8,SEMI-MIB::hpHttpMgEnhancedNetCitizenGroup,,,,,,Additional HP NetCitizen objects
.1.3.6.1.4.1.11.2.36.1.2.9,SEMI-MIB::hpHttpMgEnhancedNetCitizenTrapGroup,,,,,,HP NetCitizen notifications
.1.3.6.1.4.1.11.2.36.1.2.10,SEMI-MIB::hpHttpMgDeviceSpecificGroup,,,,,,Additional HP NetCitizen objects
.1.3.6.1.4.1.11.2.36.1.3,SEMI-MIB::hpHttpMgCompliances,,,,,,
.1.3.6.1.4.1.11.2.36.1.3.1,SEMI-MIB::hpHttpMgMinCompliance,,,,,,The compliance statement for SNMP entities which are http manageable.
.1.3.6.1.4.1.11.2.36.1.3.2,SEMI-MIB::hpHttpMgBasicNetCitizenCompliance,,,,,, The compliance statement for SNMP entities which meet basic NetCitizen crieria
.1.3.6.1.4.1.11.2.36.1.3.3,SEMI-MIB::hpHttpMgEnhancedNetCitizenCompliance,,,,,, The compliance statement for SNMP entities which meet basic NetCitizen crieria
.1.3.6.1.4.1.11.2.36.1.3.4,SEMI-MIB::hpHttpMgExtentedNetCitizenCompliance,,,,,, The compliance statement for SNMP entities which meet basic NetCitizen crieria
.1.3.6.1.4.1.11.2.36.1.3.5,SEMI-MIB::hpHttpMgExtentedNetCitizenCompliance1,,,,,, The compliance statement for SNMP entities which meet basic NetCitizen crieria
.1.3.6.1.4.1.11.2.36.1.3.6,SEMI-MIB::hpHttpMgExtentedNetCitizenCompliance2,,,,,, The compliance statement for SNMP entities which meet basic NetCitizen crieria
.1.3.6.1.4.1.11.5,HPVC-MIB::hpSysMgt,,,,,,
.1.3.6.1.4.1.11.5.7,HPVC-MIB::hpEmbeddedServerMgt,,,,,,
.1.3.6.1.4.1.11.5.7.5,HPVC-MIB::hpModuleMgmtProc,,,,,,
.1.3.6.1.4.1.11.5.7.5.2,HPVC-MIB::virtualConnect,,,,,,
.1.3.6.1.4.1.11.5.7.5.2.1,HPVC-MIB::vcDomainMIB,,,,,,This MIB module describes Virtual Connect (VC) domain level MIB objects for HP Virtual Connect Manager (VCM). The VCM is responsible for managing an entire Virtual Connect (VC) domain. This MIB module reports all managed objects with in the VC domain,such as VC Ethernet modules (Enet), VC FibreChannel (FC) modules, Physical Servers, network, fabrics, server profiles and associations between various VC objects. Keeping the limitations of SMI specifications in mind, the complex relationships between VC objects are represented in the form of mapping tables with appropriate index values to indicate the assoications.
.1.3.6.1.4.1.11.5.7.5.2.1.1,HPVC-MIB::vcDomainMIBObjects,,,,,,
.1.3.6.1.4.1.11.5.7.5.2.1.1.1,HPVC-MIB::vcDomain,,,,,,
.1.3.6.1.4.1.11.5.7.5.2.1.1.1.1,HPVC-MIB::vcDomainName,OCTET,read-only,,current,,The Virtual Connect Domain name.
.1.3.6.1.4.1.11.5.7.5.2.1.1.1.2,HPVC-MIB::vcDomainManagedStatus,INTEGER,read-only,,current,unknown(1):normal(2):warning(3):minor(4):major(5):critical(6):disabled(7):info(8),The overall domain status of the Virtual Connect Domain.
.1.3.6.1.4.1.11.5.7.5.2.1.1.1.3,HPVC-MIB::vcDomainPrimaryAddressType,INTEGER,read-only,,current,unknown(0):udpIpv4(1):udpIpv6(2):udpIpv4z(3):udpIpv6z(4):tcpIpv4(5):tcpIpv6(6):tcpIpv4z(7):tcpIpv6z(8):sctpIpv4(9):sctpIpv6(10):sctpIpv4z(11):sctpIpv6z(12):local(13):udpDns(14):tcpDns(15):sctpDns(16),The transport address type used to address the primary VC module.
.1.3.6.1.4.1.11.5.7.5.2.1.1.1.4,HPVC-MIB::vcDomainPrimaryAddress,OCTET,read-only,,current,,The address of the primary VC module. The address format is determined by the vcDomainPrimaryAddressType object.
.1.3.6.1.4.1.11.5.7.5.2.1.1.1.5,HPVC-MIB::vcDomainCheckpointValid,INTEGER,read-only,,current,true(1):false(2),This object returns 'true' when the VC configuration has been  successfully checkpointed.
.1.3.6.1.4.1.11.5.7.5.2.1.1.1.6,HPVC-MIB::vcDomainLastCheckpointTime,OCTET,read-only,,current,,The timestamp of the last attempt to update the configuration state of the domain.
.1.3.6.1.4.1.11.5.7.5.2.1.1.1.7,HPVC-MIB::vcDomainStackingLinkRedundant,INTEGER,read-only,,current,true(1):false(2),The overall stacking link connection redundancy status. This value indicates whether all VC-Enet modules will remain connected to each other with the loss of a link.
.1.3.6.1.4.1.11.5.7.5.2.1.1.2,HPVC-MIB::vcEnclosure,,,,,,
.1.3.6.1.4.1.11.5.7.5.2.1.1.2.1,HPVC-MIB::vcEnclosureTable,,not-accessible,,current,,A table of enclosures in the Virtual Connect Domain.
.1.3.6.1.4.1.11.5.7.5.2.1.1.2.1.1,HPVC-MIB::vcEnclosureEntry,,not-accessible,vcEnclosureIndex,current,,An entry containing information about a particular enclosure.
.1.3.6.1.4.1.11.5.7.5.2.1.1.2.1.1.1,HPVC-MIB::vcEnclosureIndex,INTEGER,read-only,,current,,Index value for the enclosure table.
.1.3.6.1.4.1.11.5.7.5.2.1.1.2.1.1.2,HPVC-MIB::vcEnclosureName,OCTET,read-only,,current,,Administratively assigned name for the enclosure.
.1.3.6.1.4.1.11.5.7.5.2.1.1.2.1.1.3,HPVC-MIB::vcEnclosureManagedStatus,INTEGER,read-only,,current,unknown(1):normal(2):warning(3):minor(4):major(5):critical(6):disabled(7):info(8),Managed status of the enclusure.
.1.3.6.1.4.1.11.5.7.5.2.1.1.2.1.1.4,HPVC-MIB::vcEnclosureAddressType,INTEGER,read-only,,current,unknown(0):udpIpv4(1):udpIpv6(2):udpIpv4z(3):udpIpv6z(4):tcpIpv4(5):tcpIpv6(6):tcpIpv4z(7):tcpIpv6z(8):sctpIpv4(9):sctpIpv6(10):sctpIpv4z(11):sctpIpv6z(12):local(13):udpDns(14):tcpDns(15):sctpDns(16),The transport address type used to address the enclosure's management entity.
.1.3.6.1.4.1.11.5.7.5.2.1.1.2.1.1.5,HPVC-MIB::vcEnclosureAddress,OCTET,read-only,,current,,The address of the enclosure's management entity. The address format is determined by the vcEnclosureAddressType object.
.1.3.6.1.4.1.11.5.7.5.2.1.1.2.1.1.6,HPVC-MIB::vcEnclosureUUID,OCTET,read-only,,current,,UUID value for the enclosure.
.1.3.6.1.4.1.11.5.7.5.2.1.1.3,HPVC-MIB::vcModule,,,,,,
.1.3.6.1.4.1.11.5.7.5.2.1.1.3.1,HPVC-MIB::vcModuleTable,,not-accessible,,current,,A table of VC interconnect modules in the Virtual Connect Domain.
.1.3.6.1.4.1.11.5.7.5.2.1.1.3.1.1,HPVC-MIB::vcModuleEntry,,not-accessible,vcModuleIndex,current,,An entry containing information about a single interconnect module.
.1.3.6.1.4.1.11.5.7.5.2.1.1.3.1.1.1,HPVC-MIB::vcModuleIndex,INTEGER,read-only,,current,,Index value for the vcModuleTable.
.1.3.6.1.4.1.11.5.7.5.2.1.1.3.1.1.2,HPVC-MIB::vcModuleType,INTEGER,read-only,,current,vcModuleEnet(1):vcModuleFC(2):vcModuleOther(3),The VC interconnect module type.
.1.3.6.1.4.1.11.5.7.5.2.1.1.3.1.1.3,HPVC-MIB::vcModuleManagedStatus,INTEGER,read-only,,current,unknown(1):normal(2):warning(3):minor(4):major(5):critical(6):disabled(7):info(8),The overall managed status of the vcEnetModule.
.1.3.6.1.4.1.11.5.7.5.2.1.1.3.1.1.4,HPVC-MIB::vcModulePartNumber,OCTET,read-only,,current,,The part number of the VC module.
.1.3.6.1.4.1.11.5.7.5.2.1.1.3.1.1.5,HPVC-MIB::vcModuleSerialNumber,OCTET,read-only,,current,,The serial number of the VC module.
.1.3.6.1.4.1.11.5.7.5.2.1.1.3.1.1.6,HPVC-MIB::vcModuleProductName,OCTET,read-only,,current,,The product name of the VC module.
.1.3.6.1.4.1.11.5.7.5.2.1.1.3.1.1.7,HPVC-MIB::vcModuleFwRev,OCTET,read-only,,current,,The revision number of the firmware running on this Enet module.
.1.3.6.1.4.1.11.5.7.5.2.1.1.3.1.1.8,HPVC-MIB::vcModuleEnclosurePointer,OBJECT,read-only,,current,,A reference pointer into vcEnclosureTable that contains enclosure information for the enclosure associated with this vcModule.
.1.3.6.1.4.1.11.5.7.5.2.1.1.3.1.1.9,HPVC-MIB::vcModuleLocation,Unsigned32,read-only,,current,,The interconnect bay number associated with this VC module.
.1.3.6.1.4.1.11.5.7.5.2.1.1.3.1.1.10,HPVC-MIB::vcModuleAddressType,INTEGER,read-only,,current,unknown(0):udpIpv4(1):udpIpv6(2):udpIpv4z(3):udpIpv6z(4):tcpIpv4(5):tcpIpv6(6):tcpIpv4z(7):tcpIpv6z(8):sctpIpv4(9):sctpIpv6(10):sctpIpv4z(11):sctpIpv6z(12):local(13):udpDns(14):tcpDns(15):sctpDns(16),The transport address type used to address the EnetModule's management entity.
.1.3.6.1.4.1.11.5.7.5.2.1.1.3.1.1.11,HPVC-MIB::vcModuleAddress,OCTET,read-only,,current,,The address of the SNMP agent on the VC module. The address format is determined by the vcModuleAddressType object.
.1.3.6.1.4.1.11.5.7.5.2.1.1.3.1.1.12,HPVC-MIB::vcModuleID,OCTET,read-only,,current,,Unique identifier for the VC module. This object contains reports the following values, - MAC address for Enet module. - WWN address for FC modules.
.1.3.6.1.4.1.11.5.7.5.2.1.1.4,HPVC-MIB::vcPort,,,,,,
.1.3.6.1.4.1.11.5.7.5.2.1.1.4.1,HPVC-MIB::vcPortTable,,not-accessible,,current,,A table of ports in the Virtual Connect Domain. Ports include physical network ports (uplinks, server links, stacking links, and unconnected), logical network ports (Flex-10 subports on downlinks), and Fibre Channel ports (uplinks and downlinks).
.1.3.6.1.4.1.11.5.7.5.2.1.1.4.1.1,HPVC-MIB::vcPortEntry,,not-accessible,vcPortIndex,current,,An entry continaing information about a particular ethernet port.
.1.3.6.1.4.1.11.5.7.5.2.1.1.4.1.1.1,HPVC-MIB::vcPortIndex,INTEGER,read-only,,current,,Index value for the vcPort table.
.1.3.6.1.4.1.11.5.7.5.2.1.1.4.1.1.2,HPVC-MIB::vcPortType,INTEGER,read-only,,current,vcEnetPhysicalPort(1):vcEnetLogicallPort(2):vcFCPort(3),Indicates the VC port type.
.1.3.6.1.4.1.11.5.7.5.2.1.1.4.1.1.3,HPVC-MIB::vcPortManagedStatus,INTEGER,read-only,,current,unknown(1):normal(2):warning(3):minor(4):major(5):critical(6):disabled(7):info(8),Managed status of the vcPort.
.1.3.6.1.4.1.11.5.7.5.2.1.1.4.1.1.4,HPVC-MIB::vcPortManagerAddressType,INTEGER,read-only,,current,unknown(0):udpIpv4(1):udpIpv6(2):udpIpv4z(3):udpIpv6z(4):tcpIpv4(5):tcpIpv6(6):tcpIpv4z(7):tcpIpv6z(8):sctpIpv4(9):sctpIpv6(10):sctpIpv4z(11):sctpIpv6z(12):local(13):udpDns(14):tcpDns(15):sctpDns(16),The transport address type used to address the EnetModule's management entity.
.1.3.6.1.4.1.11.5.7.5.2.1.1.4.1.1.5,HPVC-MIB::vcPortManagerAddress,OCTET,read-only,,current,,The address of the SNMP agent on the VC module. The address format is determined by the vcPortManagerAddressType object.
.1.3.6.1.4.1.11.5.7.5.2.1.1.4.1.1.6,HPVC-MIB::vcPortPhysicalPortPointer,OBJECT,read-only,,current,,reference to the table entry for the physical port in the containing module's MIB. The referenced table depends on the port type: vcEnetPhysicalPort: ifTable vcEnetLogicalPort : ifTable of corresponding physical port vcFCPort : connUnitPortTable 
.1.3.6.1.4.1.11.5.7.5.2.1.1.4.1.1.7,HPVC-MIB::vcPortContainerPointer,OBJECT,read-only,,current,,reference to the table entry in the VC Domain MIB for the component which contains this port: vcEnetPhysicalPort: vcModuleTable vcEnetLogicalPort : vcPortTable (for the physical port containing this Flex-10 subport) vcFCPort: vcModuleTable 
.1.3.6.1.4.1.11.5.7.5.2.1.1.5,HPVC-MIB::vcPhysicalServer,,,,,,
.1.3.6.1.4.1.11.5.7.5.2.1.1.5.1,HPVC-MIB::vcPhysicalServerTable,,not-accessible,,current,,A table of server bay devices in the Virtual Connect Domain.
.1.3.6.1.4.1.11.5.7.5.2.1.1.5.1.1,HPVC-MIB::vcPhysicalServerEntry,,not-accessible,vcPhysicalServerIndex,current,,VC PhysicalServer bay (server bay) table entry.
.1.3.6.1.4.1.11.5.7.5.2.1.1.5.1.1.1,HPVC-MIB::vcPhysicalServerIndex,INTEGER,read-only,,current,,Index value for the vcPhysicalServer table.
.1.3.6.1.4.1.11.5.7.5.2.1.1.5.1.1.2,HPVC-MIB::vcPhysicalServerEnclosureIndex,INTEGER,read-only,,current,,Index value for the enclosure in vcEnclosureTable containing this server.
.1.3.6.1.4.1.11.5.7.5.2.1.1.5.1.1.3,HPVC-MIB::vcPhysicalServerManagedStatus,INTEGER,read-only,,current,unknown(1):normal(2):warning(3):minor(4):major(5):critical(6):disabled(7):info(8),Managed status of the vcPhysicalServer.
.1.3.6.1.4.1.11.5.7.5.2.1.1.5.1.1.4,HPVC-MIB::vcPhysicalServerPartNumber,OCTET,read-only,,current,,The part number of the Physical Server.
.1.3.6.1.4.1.11.5.7.5.2.1.1.5.1.1.5,HPVC-MIB::vcPhysicalServerSerialNumber,OCTET,read-only,,current,,The serial number of the Physical Server.
.1.3.6.1.4.1.11.5.7.5.2.1.1.5.1.1.6,HPVC-MIB::vcPhysicalServerProductName,OCTET,read-only,,current,,The product name of the Physical Server.
.1.3.6.1.4.1.11.5.7.5.2.1.1.5.1.1.7,HPVC-MIB::vcPhysicalServerLocation,Unsigned32,read-only,,current,,The device bay number of the bay in which this server is installed.
.1.3.6.1.4.1.11.5.7.5.2.1.1.6,HPVC-MIB::vcEnetNetwork,,,,,,
.1.3.6.1.4.1.11.5.7.5.2.1.1.6.1,HPVC-MIB::vcEnetNetworkTable,,not-accessible,,current,,A table of ethernet networks in the Virtual Connect Domain.
.1.3.6.1.4.1.11.5.7.5.2.1.1.6.1.1,HPVC-MIB::vcEnetNetworkEntry,,not-accessible,vcEnetNetworkIndex,current,,An entry contianing information about a single network.
.1.3.6.1.4.1.11.5.7.5.2.1.1.6.1.1.1,HPVC-MIB::vcEnetNetworkIndex,INTEGER,read-only,,current,,Index value for the vcEnetNetwork table.
.1.3.6.1.4.1.11.5.7.5.2.1.1.6.1.1.2,HPVC-MIB::vcEnetNetworkName,OCTET,read-only,,current,,Administratively assigned name for the network.
.1.3.6.1.4.1.11.5.7.5.2.1.1.6.1.1.3,HPVC-MIB::vcEnetNetworkManagedStatus,INTEGER,read-only,,current,unknown(1):normal(2):warning(3):minor(4):major(5):critical(6):disabled(7):info(8),The overall managed status of the vcEnetNetwork.
.1.3.6.1.4.1.11.5.7.5.2.1.1.6.1.1.4,HPVC-MIB::vcEnetNetworkUplinkVlanId,Unsigned32,read-only,,current,,The VLAN ID for the external uplink network. This value is set to 0 if no uplink VLAN ID is assigned.
.1.3.6.1.4.1.11.5.7.5.2.1.1.7,HPVC-MIB::vcFcFabric,,,,,,
.1.3.6.1.4.1.11.5.7.5.2.1.1.7.1,HPVC-MIB::vcFcFabricTable,,not-accessible,,current,,A table of FC fabrics in the Virtual Connect Domain.
.1.3.6.1.4.1.11.5.7.5.2.1.1.7.1.1,HPVC-MIB::vcFcFabricEntry,,not-accessible,vcFcFabricIndex,current,,Information about a single fabric.
.1.3.6.1.4.1.11.5.7.5.2.1.1.7.1.1.1,HPVC-MIB::vcFcFabricIndex,INTEGER,read-only,,current,,Index value for the vcFcFabric table.
.1.3.6.1.4.1.11.5.7.5.2.1.1.7.1.1.2,HPVC-MIB::vcFcFabricName,OCTET,read-only,,current,,Administratively assigned name for the fabric.
.1.3.6.1.4.1.11.5.7.5.2.1.1.7.1.1.3,HPVC-MIB::vcFcFabricManagedStatus,INTEGER,read-only,,current,unknown(1):normal(2):warning(3):minor(4):major(5):critical(6):disabled(7):info(8),The overall managed status of the vcFcFabric.
.1.3.6.1.4.1.11.5.7.5.2.1.1.8,HPVC-MIB::vcProfile,,,,,,
.1.3.6.1.4.1.11.5.7.5.2.1.1.8.1,HPVC-MIB::vcProfileTable,,not-accessible,,current,,A table of Server profiles in the Virtual Connect Domain.
.1.3.6.1.4.1.11.5.7.5.2.1.1.8.1.1,HPVC-MIB::vcProfileEntry,,not-accessible,vcProfileIndex,current,,Information about a single server profile.
.1.3.6.1.4.1.11.5.7.5.2.1.1.8.1.1.1,HPVC-MIB::vcProfileIndex,INTEGER,read-only,,current,,Index value for the vcProfile table.
.1.3.6.1.4.1.11.5.7.5.2.1.1.8.1.1.2,HPVC-MIB::vcProfileName,OCTET,read-only,,current,,A globally-unique, administratively assigned name for the vcProfilek.
.1.3.6.1.4.1.11.5.7.5.2.1.1.8.1.1.3,HPVC-MIB::vcProfileManagedStatus,INTEGER,read-only,,current,unknown(1):normal(2):warning(3):minor(4):major(5):critical(6):disabled(7):info(8),Managed status of the vcProfile.
.1.3.6.1.4.1.11.5.7.5.2.1.1.8.1.1.4,HPVC-MIB::vcProfilePhysicalServerIndex,Unsigned32,read-only,,current,,Index value of assigned physical server from vcPhysicalServer table. The value is set to 0 if the profile is unassigned.
.1.3.6.1.4.1.11.5.7.5.2.1.1.8.1.1.5,HPVC-MIB::vcProfileLogicalSerialNumber,OCTET,read-only,,current,,A logical server serial number to this profile. If the value is empty, the server will use hardware serial number.
.1.3.6.1.4.1.11.5.7.5.2.1.1.9,HPVC-MIB::vcEnetNetworkVcPortMap,,,,,,
.1.3.6.1.4.1.11.5.7.5.2.1.1.9.1,HPVC-MIB::vcEnetNetworkVcPortMapTable,,not-accessible,,current,,This table lists a mapping of networks and associated ports The objective of this table is to provide a mechanism to  access all EnetPorts associated with a given EnetNetwork. The second index to the table vcPortIndex can be used access port information for a given port
.1.3.6.1.4.1.11.5.7.5.2.1.1.9.1.1,HPVC-MIB::vcEnetNetworkVcPortMapEntry,,not-accessible,vcEnetNetworkVcPortMapNetworkIndex:vcEnetNetworkVcPortMapVcPortIndex,current,,Information about a VcPort in Enet Network.
.1.3.6.1.4.1.11.5.7.5.2.1.1.9.1.1.1,HPVC-MIB::vcEnetNetworkVcPortMapNetworkIndex,INTEGER,read-only,,current,,Index value for network entry. This index value must correspond to vcEnetNetworkIndex from vcEnetNetworkTable.
.1.3.6.1.4.1.11.5.7.5.2.1.1.9.1.1.2,HPVC-MIB::vcEnetNetworkVcPortMapVcPortIndex,INTEGER,read-only,,current,,Index value for VcPort entry. This index value must correspond to vcPortIndex from vcPortTable.
.1.3.6.1.4.1.11.5.7.5.2.1.1.10,HPVC-MIB::vcFcFabricVcPortMap,,,,,,
.1.3.6.1.4.1.11.5.7.5.2.1.1.10.1,HPVC-MIB::vcFcFabricVcPortMapTable,,not-accessible,,current,,This table lists a mapping of fabics and associated VcPorts. The objective of this table is to provide a mechanism to  access all VcPorts associated with a given FcFabric. The second index to the table vcVcPortIndex can be used access VcPort information for a given VcPort
.1.3.6.1.4.1.11.5.7.5.2.1.1.10.1.1,HPVC-MIB::vcFcFabricVcPortMapEntry,,not-accessible,vcFcFabricVcPortMapFcFabricIndex:vcFcFabricVcPortMapVcPortIndex,current,,Information about a single fabric.
.1.3.6.1.4.1.11.5.7.5.2.1.1.10.1.1.1,HPVC-MIB::vcFcFabricVcPortMapFcFabricIndex,INTEGER,read-only,,current,,Index value for vcFabric entry. This index value must correspond to vcFcFabricIndex from vcFcFabricTable.
.1.3.6.1.4.1.11.5.7.5.2.1.1.10.1.1.2,HPVC-MIB::vcFcFabricVcPortMapVcPortIndex,INTEGER,read-only,,current,,Index value for VcPort entry. This index value must correspond to vcPortIndex from vcPortTable.
.1.3.6.1.4.1.11.5.7.5.2.1.1.11,HPVC-MIB::vcProfileNetworkMap,,,,,,
.1.3.6.1.4.1.11.5.7.5.2.1.1.11.1,HPVC-MIB::vcProfileNetworkMapTable,,not-accessible,,current,,This table lists a mapping of profiles and associated ports. The objective of this table is to provide a mechanism to  access all Networks assigned to a given vcProfile. The second index to the table vcNetworkIndex can be used access network information for a given network
.1.3.6.1.4.1.11.5.7.5.2.1.1.11.1.1,HPVC-MIB::vcProfileNetworkMapEntry,,not-accessible,vcProfileNetworkMapProfileIndex:vcProfileNetworkMapConnectionIndex,current,,Information about a single network.
.1.3.6.1.4.1.11.5.7.5.2.1.1.11.1.1.1,HPVC-MIB::vcProfileNetworkMapProfileIndex,INTEGER,read-only,,current,,Index value for profile entry. This index value must correspond to vcProfileIndex from vcProfileTable.
.1.3.6.1.4.1.11.5.7.5.2.1.1.11.1.1.2,HPVC-MIB::vcProfileNetworkMapConnectionIndex,INTEGER,read-only,,current,,Ethernet network connection number associated with this mapping.
.1.3.6.1.4.1.11.5.7.5.2.1.1.11.1.1.3,HPVC-MIB::vcProfileNetworkMapNetworkIndex,INTEGER,read-only,,current,,Index value to identify the network. This index value must correspond to vcNetworkIndex from vcEnetNetworkTable.
.1.3.6.1.4.1.11.5.7.5.2.1.1.12,HPVC-MIB::vcProfileFcFabricMap,,,,,,
.1.3.6.1.4.1.11.5.7.5.2.1.1.12.1,HPVC-MIB::vcProfileFcFabricMapTable,,not-accessible,,current,,This table lists a mapping of profiles and associated ports. The objective of this table is to provide a mechanism to  access all Fabrics associated with a given vcProfile. The second index to the table vcFcFabricIndex can be used to access fabric information for a given fabric
.1.3.6.1.4.1.11.5.7.5.2.1.1.12.1.1,HPVC-MIB::vcProfileFcFabricMapEntry,,not-accessible,vcProfileFcFabricMapProfileIndex:vcProfileFcFabricMapConnectionIndex,current,,Information about a single network.
.1.3.6.1.4.1.11.5.7.5.2.1.1.12.1.1.1,HPVC-MIB::vcProfileFcFabricMapProfileIndex,INTEGER,read-only,,current,,Index value for profile entry. This index value must correspond to vcProfileIndex from vcProfileTable.
.1.3.6.1.4.1.11.5.7.5.2.1.1.12.1.1.2,HPVC-MIB::vcProfileFcFabricMapConnectionIndex,INTEGER,read-only,,current,,FcFabric connection number associated with this mapping.
.1.3.6.1.4.1.11.5.7.5.2.1.1.12.1.1.3,HPVC-MIB::vcProfileFcFabricMapFcFabricIndex,INTEGER,read-only,,current,,Index value for vcFcFabric entry. This index value must correspond to vcFcFabricIndex from vcFcFabricTable.
.1.3.6.1.4.1.11.5.7.5.2.1.2,HPVC-MIB::vcDomainMIBNotificationPrefix,,,,,,
.1.3.6.1.4.1.11.5.7.5.2.1.2.0,HPVC-MIB::vcDomainMIBNotifications,,,,,,
.1.3.6.1.4.1.11.5.7.5.2.1.2.0.1,HPVC-MIB::vcDomainManagedStatusChange,,,,,,The summary managed status of the domain has changed.
.1.3.6.1.4.1.11.5.7.5.2.1.2.0.2,HPVC-MIB::vcCheckpointTimeout,,,,,,The checkpoint valid status remained false for more than five minutes.
.1.3.6.1.4.1.11.5.7.5.2.1.2.0.3,HPVC-MIB::vcCheckpointCompleted,,,,,,A checkpoint operation has completed following a checkpoint timeout trap. The checkpoint valid status is true again. This trap is not sent on every checkpoint completion, but only on a checkpoint completion after a vcCheckpointTimeout trap has been sent.
.1.3.6.1.4.1.11.5.7.5.2.1.2.0.4,HPVC-MIB::vcEnetNetworkManagedStatusChange,,,,,,The managed status of network has changed.
.1.3.6.1.4.1.11.5.7.5.2.1.2.0.5,HPVC-MIB::vcFcFabricManagedStatusChange,,,,,,The managed status of VC FC Fabric has changed.
.1.3.6.1.4.1.11.5.7.5.2.1.2.0.6,HPVC-MIB::vcModuleManagedStatusChange,,,,,,The managed status of VC module has changed.
.1.3.6.1.4.1.11.5.7.5.2.1.2.0.7,HPVC-MIB::vcEnclosureManagedStatusChange,,,,,,The managed status of the enclosure has changed.
.1.3.6.1.4.1.11.5.7.5.2.1.2.0.8,HPVC-MIB::vcPhysicalServerManagedStatusChange,,,,,,The managed status of the server has changed.
.1.3.6.1.4.1.11.5.7.5.2.1.2.0.9,HPVC-MIB::vcProfileManagedStatusChange,,,,,,The managed status of the profile has changed.
.1.3.6.1.4.1.11.5.7.5.2.1.2.0.10,HPVC-MIB::vcTestTrap,,,,,,A test trap for verifying trap configuration.
.1.3.6.1.4.1.11.5.7.5.2.1.2.0.11,HPVC-MIB::vcDomainStackingLinkRendundancyStatusChange,,,,,,The stacking link connection redundancy status has changed.
.1.3.6.1.4.1.11.5.7.5.2.1.2.1,HPVC-MIB::vcDomainMIBNotificationObjects,,,,,,
.1.3.6.1.4.1.11.5.7.5.2.1.3,HPVC-MIB::vcDomainMIBConformance,,,,,,
.1.3.6.1.4.1.11.5.7.5.2.1.3.1,HPVC-MIB::vcDomainMIBCompliances,,,,,,
.1.3.6.1.4.1.11.5.7.5.2.1.3.1.1,HPVC-MIB::vcDomainMIBCompliance,,,,,,The compliance statement for entities which implement the VC MIB.
.1.3.6.1.4.1.11.5.7.5.2.1.3.2,HPVC-MIB::vcDomainMIBGroups,,,,,,
.1.3.6.1.4.1.11.5.7.5.2.1.3.2.1,HPVC-MIB::vcDomainGroup,,,,,,Virtual Connect Domain level objects.
.1.3.6.1.4.1.11.5.7.5.2.1.3.2.2,HPVC-MIB::vcEnclosureGroup,,,,,,Virtual Connect Enclosure objects.
.1.3.6.1.4.1.11.5.7.5.2.1.3.2.3,HPVC-MIB::vcModuleGroup,,,,,,Virtual Connect Module objects.
.1.3.6.1.4.1.11.5.7.5.2.1.3.2.4,HPVC-MIB::vcPortGroup,,,,,,Virtual Connect Port objects.
.1.3.6.1.4.1.11.5.7.5.2.1.3.2.5,HPVC-MIB::vcPhysicalServerGroup,,,,,,Virtual Connect PhysicalServer objects.
.1.3.6.1.4.1.11.5.7.5.2.1.3.2.6,HPVC-MIB::vcFcFabricGroup,,,,,,Virtual Connect FC Fabric objects.
.1.3.6.1.4.1.11.5.7.5.2.1.3.2.7,HPVC-MIB::vcEnetNetworkGroup,,,,,,Virtual Connect Ethernet Network objects.
.1.3.6.1.4.1.11.5.7.5.2.1.3.2.8,HPVC-MIB::vcProfileGroup,,,,,,Virtual Connect Server profile objects.
.1.3.6.1.4.1.11.5.7.5.2.1.3.2.9,HPVC-MIB::vcEnetNetworkVcPortMapGroup,,,,,,VC Ethernet Network to VC Port mapping objects.
.1.3.6.1.4.1.11.5.7.5.2.1.3.2.10,HPVC-MIB::vcFcFabricVcPortMapGroup,,,,,,VC FC fabric to VC Port mapping objects.
.1.3.6.1.4.1.11.5.7.5.2.1.3.2.11,HPVC-MIB::vcProfileNetworkMapGroup,,,,,,VC Profile to Ethernet network mapping objects.
.1.3.6.1.4.1.11.5.7.5.2.1.3.2.12,HPVC-MIB::vcProfileFcFabricMapGroup,,,,,,VC Profile to FC fabric mapping objects.
.1.3.6.1.4.1.11.5.7.5.2.1.3.2.13,HPVC-MIB::vcManagedStatusNotificationsGroup,,,,,,The notifications which indicate specific changes in the Virtual Connect Domain managed status.
.1.3.6.1.4.1.11.5.7.5.2.3,HPVCMODULE-MIB::vcModuleMIB,,,,,,This MIB module describes module specific MIB objects present in each of the Virtual Connect Ethernet (VC-Enet) Modules. These objects represent  information about individual VC-Enet modules irrespective of its VC domain role.
.1.3.6.1.4.1.11.5.7.5.2.3.1,HPVCMODULE-MIB::vcModuleMIBObjects,,,,,,
.1.3.6.1.4.1.11.5.7.5.2.3.1.1,HPVCMODULE-MIB::vcModuleObjects,,,,,,
.1.3.6.1.4.1.11.5.7.5.2.3.1.1.1,HPVCMODULE-MIB::vcModuleDomainName,OCTET,read-only,,current,,The administratively assigned name of the Virtual Connect Domain  associated with this module.
.1.3.6.1.4.1.11.5.7.5.2.3.1.1.2,HPVCMODULE-MIB::vcModuleRole,INTEGER,read-only,,current,unintegrated(1):primaryProtected(2):primaryUnprotected(3):standby(4):other(5),The VC domain role of this VC module.
.1.3.6.1.4.1.11.5.7.5.2.3.1.1.3,HPVCMODULE-MIB::vcModuleDomainPrimaryAddressType,INTEGER,read-only,,current,unknown(0):udpIpv4(1):udpIpv6(2):udpIpv4z(3):udpIpv6z(4):tcpIpv4(5):tcpIpv6(6):tcpIpv4z(7):tcpIpv6z(8):sctpIpv4(9):sctpIpv6(10):sctpIpv4z(11):sctpIpv6z(12):local(13):udpDns(14):tcpDns(15):sctpDns(16),The transport address type used to address the primary VC module.
.1.3.6.1.4.1.11.5.7.5.2.3.1.1.4,HPVCMODULE-MIB::vcModuleDomainPrimaryAddress,OCTET,read-only,,current,,The address of the primary VC module. The address format is determined by the vcDomainPrimaryAddressType object.
.1.3.6.1.4.1.11.5.7.5.2.3.1.1.5,HPVCMODULE-MIB::vcModuleEnclosureRole,INTEGER,read-only,,current,unknown(1):primary(2):secondary(3),The VC enclosure role of the enclosure VC module.
.1.3.6.1.4.1.11.5.7.5.2.3.2,HPVCMODULE-MIB::vcModuleMIBNotificationPrefix,,,,,,
.1.3.6.1.4.1.11.5.7.5.2.3.2.0,HPVCMODULE-MIB::vcModuleMIBNotifications,,,,,,
.1.3.6.1.4.1.11.5.7.5.2.3.2.0.1,HPVCMODULE-MIB::vcModuleDomainRoleChange,,,,,,The VCM role of the VC module has changed.
.1.3.6.1.4.1.11.5.7.5.2.3.2.0.11,HPVCMODULE-MIB::vcModPortInputUtilizationUp,,,,,,The port input utilization rate has exceeded high threshold. The input line utilization on a port has exceeded its threshold for longer than the threshold averaging period. The ifIndex is the index of the affected port in ifTable.
.1.3.6.1.4.1.11.5.7.5.2.3.2.0.12,HPVCMODULE-MIB::vcModPortInputUtilizationDown,,,,,,The port input utilization rate has dropped below low watermark. The input line utilization on a port has dropped below its low  watermark for longer than the threshold averaging period. The ifIndex is the index of the affected port in ifTable.
.1.3.6.1.4.1.11.5.7.5.2.3.2.0.13,HPVCMODULE-MIB::vcModPortOutputUtilizationUp,,,,,,The port output utilization rate has exceeded high threshold. The output line utilization on a port has exceeded its high watermark for longer than the threshold averaging period. The ifIndex is the index of the affected port in ifTable.
.1.3.6.1.4.1.11.5.7.5.2.3.2.0.14,HPVCMODULE-MIB::vcModPortOutputUtilizationDown,,,,,,The port output utilization rate has dropped below low watermark. The output line utilization on a port has dropped below its low watermark for longer than the threshold averaging period. The ifIndex is the index of the affected port in ifTable.
.1.3.6.1.4.1.11.5.7.5.2.3.2.0.15,HPVCMODULE-MIB::vcModPortInputErrorsUp,,,,,,The input error count on a port has exceeded high watermark. The input error count on a port has exceeded its high watermark for longer than the error averaging period. The port is identified by ifIndex in ifTable.
.1.3.6.1.4.1.11.5.7.5.2.3.2.0.16,HPVCMODULE-MIB::vcModPortInputErrorsDown,,,,,,The input error count on a port has dropped below low watermark. The input error count on a port has dropped below its low watermark for longer than the error averaging period. The port is identified by ifIndex in ifTable.
.1.3.6.1.4.1.11.5.7.5.2.3.2.0.17,HPVCMODULE-MIB::vcModPortOutputErrorsUp,,,,,,The output error count on a port has exceeded its high watermark. The output error count on a port has exceeded its high watermark for longer than the error averaging period. The port is identified by ifIndex in ifTable.
.1.3.6.1.4.1.11.5.7.5.2.3.2.0.18,HPVCMODULE-MIB::vcModPortOutputErrorsDown,,,,,,The output error count on a port has dropped below its low watermark. The output error count on a port has dropped below its low watermark for longer than the error averaging period. The port is identified by ifIndex in ifTable.
.1.3.6.1.4.1.11.5.7.5.2.3.2.1,HPVCMODULE-MIB::vcModuleMIBNotificationObjects,,,,,,
.1.3.6.1.4.1.11.5.7.5.2.3.3,HPVCMODULE-MIB::vcModuleMIBConformance,,,,,,
.1.3.6.1.4.1.11.5.7.5.2.3.3.1,HPVCMODULE-MIB::vcModuleMIBCompliances,,,,,,
.1.3.6.1.4.1.11.5.7.5.2.3.3.1.1,HPVCMODULE-MIB::vcModuleMIBCompliance,,,,,,The compliance statement for entities which implement the VC MIB.
.1.3.6.1.4.1.11.5.7.5.2.3.3.2,HPVCMODULE-MIB::vcModuleMIBGroups,,,,,,
.1.3.6.1.4.1.11.5.7.5.2.3.3.2.1,HPVCMODULE-MIB::vcModuleGroup,,,,,,Virtual Connect Module objects.
.1.3.6.1.4.1.11.5.7.5.2.3.3.2.2,HPVCMODULE-MIB::vcModPortThresholdNotificationsGroup,,,,,,The notifications which indicate specific changes in the Virtual Connect port status.
.1.3.6.1.4.1.232,CPQHOST-MIB::compaq,,,,,,
.1.3.6.1.4.1.232.0,CPQHOST-MIB::compaq#,,,,,,
.1.3.6.1.4.1.232.0.2001,CPQSINFO-MIB::cpqSiHoodRemoved,,,,,,System hood is removed. The hood status has been set to removed. The system's hood is not in a properly installed state. This situation may result in improper cooling of the system due to air flow changes caused by the missing hood. User Action: Replace the cover (hood), ensure the system's cover is properly installed. Verify the system is in working order.
.1.3.6.1.4.1.232.0.2002,CPQSINFO-MIB::cpqSiMonitorConditionOK,,,,,,Fault reporting features have returned to within their normal operating range for the monitor indicated by cpqSiMonitorIndex. The monitor's condition has been set to OK. User Action: None.
.1.3.6.1.4.1.232.0.2003,CPQSINFO-MIB::cpqSiMonitorConditionDegraded,,,,,,A fault reporting feature has exceeded normal limits for the monitor indicated by the cpqSiMonitorIndex. The monitor's condition is degraded due to the internal temperature exceeding normal operating limits. The monitor is still useable, but action should be taken to return the condition to OK. User Action: Physically check for obstructions to air flow around the monitor. Check the thermostat in the room that the system occupies. Allow the monitor to cool by turning off the monitor for 5 minutes then turn the monitor back on. After the monitor cools, another alarm indicating an improving condition, such as Monitor OK, will be issued.
.1.3.6.1.4.1.232.0.2004,CPQSINFO-MIB::cpqSiMonitorConditionFailed,,,,,,A fault reporting feature has exceeded normal limits in the monitor indicated by the cpqSiMonitorIndex. The monitor's condition has been set to failed due to an operational feature exceeding normal operating limits. The monitor will not be useable and should be replaced. User Action: Make a note of the monitor model number and serial number. Replace the monitor. Refer to the appropriate Maintenance and Service Guide for detailed information on a component replacement.
.1.3.6.1.4.1.232.0.2005,CPQSINFO-MIB::cpqSiCorrMemErrStatusDegraded,,,,,,Correctable memory error count has exceeded the threshold for the memory module indicated by the 'cpqSiMemErrorIndex' variable. The appropriate cpqSiMemModuleECCStatus has been set to degraded. User Action: For Desktops, the System Administrator should run the F10 Diagnostics on this system and select RAM LONG TEST. If it is determined that a module needs replacing, schedule maintenance for the system and replace the failed memory module. Refer to the appropriate Maintenance and Service Guide for detailed information on a component replacement.
.1.3.6.1.4.1.232.0.2006,CPQSINFO-MIB::cpqSiCorrMemErrStatusOk,,,,,,Correctable memory error count is now below the threshold for the memory module indicated by the 'cpqSiMemErrorIndex' variable. The appropriate cpqSiMemModuleECCStatus has been set to ok. User Action: None.
.1.3.6.1.4.1.232.0.2007,CPQSINFO-MIB::cpqSiMemConfigChange,,,,,,A memory configuration change has occurred. CpqSiMemConfigChangeData will indicate which memory modules slots have changed. User Action: You may want to verify a valid reason for a memory configuration to have occurred. If system issuing the alert is a Desktop running NT, the memory configuration change information is also logged in the NT System Log.
.1.3.6.1.4.1.232.0.2008,CPQSINFO-MIB::cpqSiHotPlugSlotBoardRemoved,,,,,,Hot Plug Slot Board Removed. A Hot Plug Slot Board has been removed from the specified chassis and slot. User Action: None.
.1.3.6.1.4.1.232.0.2009,CPQSINFO-MIB::cpqSiHotPlugSlotBoardInserted,,,,,,Hot Plug Slot Board Inserted. A Hot Plug Slot Board has been inserted into the specified chassis and slot. User Action: None.
.1.3.6.1.4.1.232.0.2010,CPQSINFO-MIB::cpqSiHotPlugSlotPowerUpFailed,,,,,,Hot Plug Slot Board Failed Power-Up. A Hot Plug Slot Board has failed to power-up in the specified chassis and slot. User Action: Insure the board and all cables are installed correctly and the board type and revision are the same as the replaced board.
.1.3.6.1.4.1.232.0.2011,CPQSINFO-MIB::cpqSiSysBatteryFailure,,,,,,The battery indicated by cpqSiSysBatteryIndex has failed and must be replaced. User Action: Contact your System Administrator or Authorized Reseller to order a replacement battery. Recycle your old battery. For proper disposal information, refer to the documentation that came with your computer.
.1.3.6.1.4.1.232.0.2012,CPQSINFO-MIB::cpqSiSysBatteryChargingDegraded,,,,,,Significant battery degradation has occurred with battery indicated by cpqSiSysBatteryIndex. The battery can no longer be fully recharged. User Action: If using multiple batteries, run the Power Conservation Utility to identify the battery location. Contact your System Administrator or Authorized Reseller to order a replacement battery.
.1.3.6.1.4.1.232.0.2013,CPQSINFO-MIB::cpqSiSysBatteryCalibrationError,,,,,,Calibration is needed with battery indicated by cpqSiSysBatteryIndex. The battery can not correctly indicate capacity. User Action: Run the Power Conservation Utility. Contact your System Administrator or Authorized Reseller to order a replacement battery.
.1.3.6.1.4.1.232.0.11001,CPQHOST-MIB::cpqHoGenericTrap,,,,,,Generic trap.
.1.3.6.1.4.1.232.0.11002,CPQHOST-MIB::cpqHoAppErrorTrap,,,,,,An application has generated an exception. Specific error information is contained in the variable cpqHoSwPerfAppErrorDesc.
.1.3.6.1.4.1.232.0.11003,CPQHOST-MIB::cpqHo2GenericTrap,,,,,,Generic trap.
.1.3.6.1.4.1.232.0.11004,CPQHOST-MIB::cpqHo2AppErrorTrap,,,,,,An application has generated an exception. Specific error information is contained in the variable cpqHoSwPerfAppErrorDesc.
.1.3.6.1.4.1.232.0.11005,CPQHOST-MIB::cpqHo2NicStatusOk,,,,,,This trap will be sent any time the status of a NIC changes to the OK condition.
.1.3.6.1.4.1.232.0.11006,CPQHOST-MIB::cpqHo2NicStatusFailed,,,,,,This trap will be sent any time the status of a NIC changes to the Failed condition.
.1.3.6.1.4.1.232.0.11007,CPQHOST-MIB::cpqHo2NicSwitchoverOccurred,,,,,,This trap will be sent any time the configured redundant NIC becomes the active NIC.
.1.3.6.1.4.1.232.0.11008,CPQHOST-MIB::cpqHo2NicStatusOk2,,,,,,This trap will be sent any time the status of a NIC changes to the OK condition.
.1.3.6.1.4.1.232.0.11009,CPQHOST-MIB::cpqHo2NicStatusFailed2,,,,,,This trap will be sent any time the status of a NIC changes to the Failed condition.
.1.3.6.1.4.1.232.0.11010,CPQHOST-MIB::cpqHo2NicSwitchoverOccurred2,,,,,,This trap will be sent any time the configured redundant NIC becomes the active NIC.
.1.3.6.1.4.1.232.0.11011,CPQHOST-MIB::cpqHoProcessEventTrap,,,,,,A monitored process has either started or stopped running.
.1.3.6.1.4.1.232.0.11012,CPQHOST-MIB::cpqHoProcessCountWarning,,,,,,A monitored process count has violated the thresholds set on cpqHoSWRunningCount
.1.3.6.1.4.1.232.0.11013,CPQHOST-MIB::cpqHoProcessCountNormal,,,,,,A monitored process count has returned back to normal.
.1.3.6.1.4.1.232.0.11014,CPQHOST-MIB::cpqHoCriticalSoftwareUpdateTrap,,,,,,This trap is a send to the user to notify him of a Critical Software Update.
.1.3.6.1.4.1.232.0.11015,CPQHOST-MIB::cpqHoCrashDumpNotEnabledTrap,,,,,,This trap is sent to the user to notify him that the Crash Dump is not enabled. This trap is not sent if cpqHoCrashDumpMonitoring is disabled.
.1.3.6.1.4.1.232.0.11016,CPQHOST-MIB::cpqHoBootPagingFileTooSmallTrap,,,,,,This trap is sent when the paging file size of the boot volume or the target volume of the memory dump file is too small to hold a crash dump. This trap is not sent if cpqHoCrashDumpMonitoring is disabled.
.1.3.6.1.4.1.232.0.11017,CPQHOST-MIB::cpqHoSWRunningStatusChangeTrap,,,,,,This trap notifies the user that the running software has changed status, configuration status, or redundancy mode.
.1.3.6.1.4.1.232.0.11018,CPQHOST-MIB::cpqHo2PowerThresholdTrap,,,,,,Power threshold exceeded.
.1.3.6.1.4.1.232.0.11019,CPQHOST-MIB::cpqHoBootPagingFileOrFreeSpaceTooSmallTrap,,,,,,This trap is sent when the paging file size of the boot volume or the free space of memory dump target volume is too small to hold a crash dump.
.1.3.6.1.4.1.232.2,CPQSINFO-MIB::cpqSystemInfo,,,,,,
.1.3.6.1.4.1.232.2.1,CPQSINFO-MIB::cpqSiMibRev,,,,,,
.1.3.6.1.4.1.232.2.1.1,CPQSINFO-MIB::cpqSiMibRevMajor,INTEGER,read-only,,mandatory,,The major revision level of the MIB. A change in the major revision level represents a major change in the architecture of the MIB. A change in the major revision level may indicate a significant change in the information supported and/or the meaning of the supported information, correct interpretation of data may require a MIB document with the same major revision level.
.1.3.6.1.4.1.232.2.1.2,CPQSINFO-MIB::cpqSiMibRevMinor,INTEGER,read-only,,mandatory,,The minor revision level of the MIB. A change in the minor revision level may represent some minor additional support, no changes to any pre-existing information has occurred.
.1.3.6.1.4.1.232.2.1.3,CPQSINFO-MIB::cpqSiMibCondition,INTEGER,read-only,,mandatory,other(1):ok(2):degraded(3):failed(4),The overall condition. This object represents the overall status of the server information represented by this MIB.
.1.3.6.1.4.1.232.2.2,CPQSINFO-MIB::cpqSiComponent,,,,,,
.1.3.6.1.4.1.232.2.2.1,CPQSINFO-MIB::cpqSiInterface,,,,,,
.1.3.6.1.4.1.232.2.2.1.4,CPQSINFO-MIB::cpqSiOsCommon,,,,,,
.1.3.6.1.4.1.232.2.2.1.4.1,CPQSINFO-MIB::cpqSiOsCommonPollFreq,INTEGER,read-write,,mandatory,,The Insight Agent's polling frequency. The frequency, in seconds, at which the Insight Agent requests information from the device driver. A frequency of zero (0) indicates that the Insight Agent retrieves the information upon request of a management station, it does not poll the device driver at a specific interval. If the poll frequency is zero (0) all attempts to write to this object will fail. If the poll frequency is non-zero, setting this value will change the polling frequency of the Insight Agent. Setting the poll frequency to zero (0) will always fail, an agent may also choose to fail any request to change the poll frequency to a value that would severely impact system performance.
.1.3.6.1.4.1.232.2.2.1.4.2,CPQSINFO-MIB::cpqSiOsCommonModuleTable,,not-accessible,,deprecated,,A table of software modules that provide an interface to the device this MIB describes.
.1.3.6.1.4.1.232.2.2.1.4.2.1,CPQSINFO-MIB::cpqSiOsCommonModuleEntry,,not-accessible,cpqSiOsCommonModuleIndex,deprecated,,A description of a software module that provides an interface to the device this MIB describes.
.1.3.6.1.4.1.232.2.2.1.4.2.1.1,CPQSINFO-MIB::cpqSiOsCommonModuleIndex,INTEGER,read-only,,deprecated,,A unique index for this module description.
.1.3.6.1.4.1.232.2.2.1.4.2.1.2,CPQSINFO-MIB::cpqSiOsCommonModuleName,OCTET,read-only,,deprecated,,The module name.
.1.3.6.1.4.1.232.2.2.1.4.2.1.3,CPQSINFO-MIB::cpqSiOsCommonModuleVersion,OCTET,read-only,,deprecated,,The module version in XX.YY format. Where XX is the major version number and YY is the minor version number. This field will be a null (size 0) string if the agent cannot provide the module version.
.1.3.6.1.4.1.232.2.2.1.4.2.1.4,CPQSINFO-MIB::cpqSiOsCommonModuleDate,OCTET,read-only,,deprecated,,The module date. field octets contents range ===== ====== ======= ===== 1 1-2 year 0..65536 2 3 month 1..12 3 4 day 1..31 4 5 hour 0..23 5 6 minute 0..59  6 7 second 0..60 (use 60 for leap-second) This field will be set to year = 0 if the agent cannot provide the module date. The hour, minute, and second field will be set to zero (0) if they are not relevant. The year field is set with the most significant octet first.
.1.3.6.1.4.1.232.2.2.1.4.2.1.5,CPQSINFO-MIB::cpqSiOsCommonModulePurpose,OCTET,read-only,,deprecated,,The purpose of the module described in this entry.
.1.3.6.1.4.1.232.2.2.2,CPQSINFO-MIB::cpqSiAsset,,,,,,
.1.3.6.1.4.1.232.2.2.2.1,CPQSINFO-MIB::cpqSiSysSerialNum,OCTET,read-only,,mandatory,,The serial number of the physical system unit. The string will be empty if the system does not report the serial number function.
.1.3.6.1.4.1.232.2.2.2.2,CPQSINFO-MIB::cpqSiFormFactor,INTEGER,read-write,,mandatory,unknown(1):portable(2):laptop(3):desktop(4):tower(5):mini-tower(6):rack-mount(7),The form factor of the system. Setting this variable to unknown will fail.
.1.3.6.1.4.1.232.2.2.2.3,CPQSINFO-MIB::cpqSiAssetTag,OCTET,read-write,,mandatory,,The customer changeable identifier that is set to the system serial number at the time of manufacture. The string will be empty if the system does not report this function.
.1.3.6.1.4.1.232.2.2.2.4,CPQSINFO-MIB::cpqSiOwnershipTag,OCTET,read-only,,mandatory,,This is a customer changeable identifier that will be displayed by ROM at POST. This is an 80 byte standard ASCII character string and is Administrator Password protected. An example could be: Property of Hewlett-Packard Company The string should be NULL terminated. This item will be empty if the system does not report this function.
.1.3.6.1.4.1.232.2.2.2.5,CPQSINFO-MIB::cpqSiSysServiceNum,OCTET,read-only,,mandatory,,The service number of the system unit. The string will be empty if the system does not report the system service number.
.1.3.6.1.4.1.232.2.2.2.6,CPQSINFO-MIB::cpqSiSysProductId,OCTET,read-only,,mandatory,,The product id string of the system unit. The string will be empty if the system does not report the product id.
.1.3.6.1.4.1.232.2.2.2.7,CPQSINFO-MIB::cpqSiAssetTagMaxLength,INTEGER,read-only,,optional,, Maximum allowed size in bytes of the asset tag.
.1.3.6.1.4.1.232.2.2.2.8,CPQSINFO-MIB::cpqSiVirtualSystemTable,,not-accessible,,optional,,A table of virtual system information entries.
.1.3.6.1.4.1.232.2.2.2.8.1,CPQSINFO-MIB::cpqSiVirtualSystemEntry,,not-accessible,cpqSiVirtualSystemIndex,optional,,A virtual system information table entry.
.1.3.6.1.4.1.232.2.2.2.8.1.1,CPQSINFO-MIB::cpqSiVirtualSystemIndex,INTEGER,read-only,,optional,,The unique index of the virtual system information entry.
.1.3.6.1.4.1.232.2.2.2.8.1.2,CPQSINFO-MIB::cpqSiVirtualSystemSerialNumber,OCTET,read-only,,optional,,The HP Virtual Serial Number for the computer system package. The Virtual Serial Number is the system serial number exposed to the operating system when running in an HP Virtual Connect environment. The Virtual Serial Number presented here will correspond to the Virtual UUID at the same index location.
.1.3.6.1.4.1.232.2.2.2.8.1.3,CPQSINFO-MIB::cpqSiVirtualSystemUUID,OCTET,read-only,,optional,,The HP Virtual UUID for the computer system package. The Virtual UUID is the UUID number exposed to the operating system when running in an HP Virtual Connect environment. The Virtual UUID presented here will correspond to the Virtual serial number at the same index location.
.1.3.6.1.4.1.232.2.2.3,CPQSINFO-MIB::cpqSiSecurity,,,,,,
.1.3.6.1.4.1.232.2.2.3.1,CPQSINFO-MIB::cpqSiPowerOnPassword,INTEGER,read-only,,mandatory,other(1):disabled(2):enabled(3),The state of the power on password feature.
.1.3.6.1.4.1.232.2.2.3.2,CPQSINFO-MIB::cpqSiNetServerMode,INTEGER,read-only,,mandatory,other(1):disabled(2):enabled(3),The state of the network server mode feature.
.1.3.6.1.4.1.232.2.2.3.3,CPQSINFO-MIB::cpqSiQuickLockPassword,INTEGER,read-only,,mandatory,other(1):disabled(2):enabled(3),The state of the quicklock password feature.
.1.3.6.1.4.1.232.2.2.3.4,CPQSINFO-MIB::cpqSiQuickBlank,INTEGER,read-only,,mandatory,other(1):disabled(2):enabled(3),The state of the quick blank screen feature.
.1.3.6.1.4.1.232.2.2.3.5,CPQSINFO-MIB::cpqSiDisketteBootControl,INTEGER,read-only,,mandatory,other(1):disabled(2):enabled(3),The state of the diskette boot control feature.
.1.3.6.1.4.1.232.2.2.3.6,CPQSINFO-MIB::cpqSiSerialPortAControl,INTEGER,read-only,,mandatory,other(1):disabled(2):enabled(3),The state of the access control for the primary serial port interface embedded in the system board.
.1.3.6.1.4.1.232.2.2.3.7,CPQSINFO-MIB::cpqSiSerialPortBControl,INTEGER,read-only,,mandatory,other(1):disabled(2):enabled(3),The state of the access control for the secondary serial port interface embedded in the system board.
.1.3.6.1.4.1.232.2.2.3.8,CPQSINFO-MIB::cpqSiParallelPortControl,INTEGER,read-only,,mandatory,other(1):disabled(2):enabled(3),The state of the access control for the parallel port interface embedded in the system board.
.1.3.6.1.4.1.232.2.2.3.9,CPQSINFO-MIB::cpqSiFloppyDiskControl,INTEGER,read-only,,mandatory,other(1):disabled(2):enabled(3),The state of the access control for the floppy diskette interface embedded in the system board.
.1.3.6.1.4.1.232.2.2.3.10,CPQSINFO-MIB::cpqSiFixedDiskControl,INTEGER,read-only,,mandatory,other(1):disabled(2):enabled(3),The state of the access control for the fixed disk interface embedded in the system board.
.1.3.6.1.4.1.232.2.2.3.11,CPQSINFO-MIB::cpqSiHoodRemovedTime,OCTET,read-only,,mandatory,,Last detection of hood removed by Smart Hood Sensor.
.1.3.6.1.4.1.232.2.2.3.12,CPQSINFO-MIB::cpqSiHoodSensorConfiguration,INTEGER,read-only,,mandatory,other(1):disabled(2):notifyUser(3):adminPasswordProtected(4),This is the current configuration of the Smart Cover sensor. The following values are currently defined: other(1) Smart Cover sensor is not supported on this system or cannot be determined by the Insight Agent. You may need to upgrade your software. disabled(2) Smart Cover sensor will not detect a hood removal and cpqSiHoodRemovedTime will not be updated. notifyUser(3) Smart Cover sensor will detect a hood removal and will display a message at POST for the user. adminPasswordProtected(4) Smart Cover sensor will detect a hood removal and will display a message at POST for the user to enter the Admin Password. The system will not boot until proper password is entered.
.1.3.6.1.4.1.232.2.2.3.13,CPQSINFO-MIB::cpqSiSmartCoverLockStatus,INTEGER,read-only,,mandatory,other(1):unlocked(2):locked(3),This is the current status of the Smart Cover Lock. The following values are currently defined: other(1) Smart Cover Lock is not supported on this system or cannot be determined by the Insight Agent. You may need to upgrade your software. unlocked(2) Smart Cover Lock is not locked. The status will be set to unlocked due to one of the following: 1. The system hood is removed, or 2. There is no administrator password set, or 3. The administrator manually sets status to unlock. locked(3) Smart Cover Lock is locked. The administrator password is required to unlock the hood.
.1.3.6.1.4.1.232.2.2.3.14,CPQSINFO-MIB::cpqSiUSBPortControl,INTEGER,read-only,,mandatory,other(1):disabled(2):enabled(3):legacydisabled(4):externalportdisabled(5),The state of the access control for the Universal Serial Bus interface(s) embedded in the system board.  other(1) If Status could not be determined. disabled(2) USB interface is disable. enabled(3) USB interface is enable.  legacydisabled(4) Legacy USB interface is disabled.  externalportdisabled(5) External USB Ports are disabled.
.1.3.6.1.4.1.232.2.2.4,CPQSINFO-MIB::cpqSiSystemBoard,,,,,,
.1.3.6.1.4.1.232.2.2.4.1,CPQSINFO-MIB::cpqSiProductId,INTEGER,read-only,,mandatory,,The machine product ID. This value indicates the product type of the system board in this system. The value 127 will be given if the machine ID cannot be determined. A value of 127 will also be used for the special case of a machine containing neither EISA nor ISA slots.
.1.3.6.1.4.1.232.2.2.4.2,CPQSINFO-MIB::cpqSiProductName,OCTET,read-only,,mandatory,,The machine product name. The name of the machine used in this system.
.1.3.6.1.4.1.232.2.2.4.4,CPQSINFO-MIB::cpqSiAuxiliaryInput,INTEGER,read-only,,mandatory,other(1):disabled(2):enabled(3),The state of the auxiliary input (pointing) device.
.1.3.6.1.4.1.232.2.2.4.5,CPQSINFO-MIB::cpqSiMemModuleTable,,not-accessible,,mandatory,,A table of memory module descriptions.
.1.3.6.1.4.1.232.2.2.4.5.1,CPQSINFO-MIB::cpqSiMemModuleEntry,,not-accessible,cpqSiMemBoardIndex:cpqSiMemModuleIndex,mandatory,,A memory module description.
.1.3.6.1.4.1.232.2.2.4.5.1.1,CPQSINFO-MIB::cpqSiMemBoardIndex,INTEGER,read-only,,mandatory,,The slot in which the memory board or cartridge is installed. A value of 0 indicates memory installed directly on the system board.
.1.3.6.1.4.1.232.2.2.4.5.1.2,CPQSINFO-MIB::cpqSiMemModuleIndex,INTEGER,read-only,,mandatory,,The memory module number.
.1.3.6.1.4.1.232.2.2.4.5.1.3,CPQSINFO-MIB::cpqSiMemModuleSize,INTEGER,read-only,,mandatory,,Module memory size in kilobytes. A kilobyte of memory is defined as 1024 bytes. A size of 0 indicates the module is not present.
.1.3.6.1.4.1.232.2.2.4.5.1.4,CPQSINFO-MIB::cpqSiMemModuleType,INTEGER,read-only,,mandatory,other(1):board(2):cpqSingleWidthModule(3):cpqDoubleWidthModule(4):simm(5):pcmcia(6):compaq-specific(7):dimm(8):smallOutlineDimm(9):rimm(10):srimm(11):fb-dimm(12),Type of memory module installed. The value other(1) will be given if the type is not known. The value board(2) will be given if the memory module is permanently mounted (not modular) on a system board or memory expansion board.
.1.3.6.1.4.1.232.2.2.4.5.1.5,CPQSINFO-MIB::cpqSiMemModuleSpeed,INTEGER,read-only,,deprecated,,Module memory speed in nanoseconds. The value zero (0) will be given if the module speed cannot be determined.
.1.3.6.1.4.1.232.2.2.4.5.1.6,CPQSINFO-MIB::cpqSiMemModuleTechnology,INTEGER,read-only,,mandatory,other(1):fastPageMode(2):edoPageMode(3):burstEdoPageMode(4):synchronous(5):rdram(6),Technology type of memory module installed. The value other(1) will be given if the technology is not known.
.1.3.6.1.4.1.232.2.2.4.5.1.7,CPQSINFO-MIB::cpqSiMemModuleManufacturer,OCTET,read-only,,mandatory,,The memory module's manufacturer name. This field will be a null (size 0) string if the manufacturer name is not available.
.1.3.6.1.4.1.232.2.2.4.5.1.8,CPQSINFO-MIB::cpqSiMemModulePartNo,OCTET,read-only,,mandatory,,The memory module's manufacturer part number. This field will be a null (size 0) string if the manufacturer part number is not available.
.1.3.6.1.4.1.232.2.2.4.5.1.9,CPQSINFO-MIB::cpqSiMemModuleDate,OCTET,read-only,,mandatory,,The memory module date of manufacture. field octets contents range ===== ====== ====================== ======== 1 1-2 year 0..65536 2 3 month 1..12 3 4 day 1..31 4 5 hour 0..23 5 6 minute 0..59 6 7 second 0..60 (use 60 for leap-second) This field will be set to year = 0 if the date of manufacture is not available. The hour, minute, and second fields will always be set to 0.
.1.3.6.1.4.1.232.2.2.4.5.1.10,CPQSINFO-MIB::cpqSiMemModuleSerialNo,OCTET,read-write,,mandatory,,The memory module's serial number. This field will be a null (size 0) string if the serial number is not available.
.1.3.6.1.4.1.232.2.2.4.5.1.11,CPQSINFO-MIB::cpqSiMemModuleECCStatus,INTEGER,read-only,,mandatory,other(1):ok(2):degraded(3):degradedModuleIndexUnknown(4),This provides the current status of the correctable memory errors for this memory module. The following status values are supported: other(1): ECC is not supported on this memory module. ok(2): The correctable error count is below threshold. degraded(3): The correctable error count has exceeded threshold. degradedModuleIndexUnknown(4): The correctable error count has exceeded threshold. The module index not available.
.1.3.6.1.4.1.232.2.2.4.5.1.12,CPQSINFO-MIB::cpqSiMemModuleHwLocation,OCTET,read-only,,optional,,A text description of the hardware location, on complex multi SBB hardware only, for the memory module. A NULL string indicates that the hardware location could not be determined or is irrelevant.
.1.3.6.1.4.1.232.2.2.4.5.1.13,CPQSINFO-MIB::cpqSiMemModuleFrequency,INTEGER,read-only,,mandatory,,The memory module frequency in MHz. The value zero (0) will be given if the module frequency cannot be determined.
.1.3.6.1.4.1.232.2.2.4.5.1.14,CPQSINFO-MIB::cpqSiMemModuleCellTablePtr,INTEGER,read-only,,optional,,Index for the cell in cpqSeCellTable where the memory board is installed.
.1.3.6.1.4.1.232.2.2.4.5.1.15,CPQSINFO-MIB::cpqSiMemModuleCellStatus,INTEGER,read-only,,optional,other(1):ok(2):deconfigured(3),This provides the current status for this memory module. The following status values are supported: other(1): The memory module status is not available ok(2): The memory module is active deconfigured(3): The memory module is not ready
.1.3.6.1.4.1.232.2.2.4.5.1.16,CPQSINFO-MIB::cpqSiMemModulePartNoMfgr,OCTET,read-only,,optional,,The memory module's manufacturer's part number. This field will be a null (size 0) string if the manufacturer part number is not available.
.1.3.6.1.4.1.232.2.2.4.5.1.17,CPQSINFO-MIB::cpqSiMemModuleSerialNoMfgr,OCTET,read-only,,optional,,The memory module's manufacturer's serial number. This field will be a null (size 0) string if the manufacturer serial number is not available.
.1.3.6.1.4.1.232.2.2.4.6,CPQSINFO-MIB::cpqSiSystemId,INTEGER,read-only,,mandatory,,The System ID. This value indicates the system ID of the system board in this system. This ID replaces the product ID used in older machines (cpqSiProductId). A value of 7Eh for the cpqSiProductId indicates that the cpqSiSystemId should be used to identify the system. A value of zero (0) indicates that the system ID function is not supported on this machine. In this case, the cpqSiProductId should be used to identify the system.
.1.3.6.1.4.1.232.2.2.4.7,CPQSINFO-MIB::cpqSiSystemCpuId,INTEGER,read-only,,mandatory,,The System ID : CPU Component. This value indicates the CPU type of the system board in this system. A value of zero (0) indicates that the CPU type cannot be determined.
.1.3.6.1.4.1.232.2.2.4.8,CPQSINFO-MIB::cpqSiFlashRomSupport,INTEGER,read-only,,mandatory,other(1):notSupported(2):supported(3),This value indicates if this system supports flash upgradable system ROM.
.1.3.6.1.4.1.232.2.2.4.9,CPQSINFO-MIB::cpqSiQuickTestRomDate,OCTET,read-only,,mandatory,,This value indicates the date of the current quick test ROM image. field octets contents range ===== ====== ======= ===== 1 1-2 year 0..65536 2 3 month 1..12 3 4 day 1..31 4 5 hour 0..23 5 6 minute 0..59 6 7 second 0..60 (use 60 for leap-second) This field will be set to year = 0 if quick test ROM is not present. The hour, minute, and second field will be set to zero (0) if they are not relevant. The year field is set with the most significant octet first.
.1.3.6.1.4.1.232.2.2.4.10,CPQSINFO-MIB::cpqSiReboot,INTEGER,read-write,,deprecated,notAvailable(1):available(2):defaultOnlyAvailable(3):rebootToCpqUtils(2693):rebootToDefault(8115):autoShutdown(9037),This object may contain the following values: notAvailable(1) the system does not support the reboot functionality. Setting this object to notAvailable(1) has no effect. available(2) the system supports the both reboot to functionalities. Setting this object to available(2) has no effect. defaultOnlyAvailable(3) the system supports the only the default reboot functionality. Setting this object to available(3) has no effect. rebootToCpqUtils(2693) the system will reboot to the System Utilities if the reboot functionality is available. If possible, the agent will attempt to gracefully shutdown the operating system before performing the reboot. If this functionality is unavailable on this system then all sets will have no effect. rebootToDefault(8115) the system will reboot and allow the default boot process to occur if the reboot functionality is available. If possible, the agent will attempt to gracefully shutdown the operating system before performing the reboot. If this functionality is unavailable on this system then all sets will have no effect. autoShutdown(9037) If possible, the agent will attempt to gracefully shutdown the operating system. The agent will not preform a reboot. 
.1.3.6.1.4.1.232.2.2.4.11,CPQSINFO-MIB::cpqSiProcMicroPatchTable,,not-accessible,,mandatory,,This table lists the set of processor microcode patches that the system ROM contains. During post, the ROM will apply the appropriate patches to the CPU microcode. Scan this table to ensure that a patch is being applied to a processor.
.1.3.6.1.4.1.232.2.2.4.11.1,CPQSINFO-MIB::cpqSiProcMicroPatchEntry,,not-accessible,cpqSiProcMicroPatchIndex,mandatory,,An entry describing one microcode patch contained in the system ROM.
.1.3.6.1.4.1.232.2.2.4.11.1.1,CPQSINFO-MIB::cpqSiProcMicroPatchIndex,INTEGER,read-only,,mandatory,,Index into the microcode patch table.
.1.3.6.1.4.1.232.2.2.4.11.1.2,CPQSINFO-MIB::cpqSiProcMicroPatchId,INTEGER,read-only,,mandatory,,The ID of this particular CPU microcode patch.
.1.3.6.1.4.1.232.2.2.4.11.1.3,CPQSINFO-MIB::cpqSiProcMicroPatchDate,OCTET,read-only,,mandatory,,This value indicates the date of this CPU microcode patch. field octets contents range ===== ====== ======= ===== 1 1-2 year 0..65536 2 3 month 1..12 3 4 day 1..31 4 5 hour 0..23 5 6 minute 0..59 6 7 second 0..60 (use 60 for leap-second) NOTE: Year is stored in packed BCD. The most significant part is in the second octet. For example: 1995 would be stored as 0x95 0x19. The hour, minute, and second field will be set to zero (0) if they are not relevant. The year field is set with the most significant octet first.
.1.3.6.1.4.1.232.2.2.4.11.1.4,CPQSINFO-MIB::cpqSiProcMicroPatchFamily,OCTET,read-only,,mandatory,,The valid family/model/step of the processor that this CPU microcode patch applies to. field octets contents range ===== ====== ======= ===== 1 1 CPU Step 0..255 2 2 CPU Model 0..255 3 3 CPU Family 0..255 
.1.3.6.1.4.1.232.2.2.4.12,CPQSINFO-MIB::cpqSiPowerMgmtStatus,INTEGER,read-only,,mandatory,other(1):disabled(2):enabled(3),The state of power management.
.1.3.6.1.4.1.232.2.2.4.13,CPQSINFO-MIB::cpqSiRebootFlags,INTEGER,read-write,,mandatory,,The Reboot Flags. This is a collection of flags used to indicate the re-boot options available. This integer is a bitmap, with each bit indicating the availability of an option. If the bit is set to 1, the option is available; otherwise it is not. Multiple options are allowed. NOTE: bit 31 is the most significant bit, bit 0 is the least significant. Status This is a collection of flags. Each bit has the following meaning when it is on (1): Bit 31: Execute Set Bit 30-6: RESERVED Bit 5: Boot to ROM Based Setup Bit 4: RESERVED Bit 3: Boot to OS Bit 2: Boot to Utils Bit 1: Warm Boot Bit 0: Cold Boot
.1.3.6.1.4.1.232.2.2.4.14,CPQSINFO-MIB::cpqSiMemErrorIndex,INTEGER,read-only,,mandatory,,Placeholder for memory module number for ECC traps. Represents the number of the memory module for which an ECC status change has occurred. Set to 65535 if module number not available.
.1.3.6.1.4.1.232.2.2.4.15,CPQSINFO-MIB::cpqSiMemECCCondition,INTEGER,read-only,,mandatory,other(1):ok(2):degraded(3),This provides the current condition of the correctable memory errors for the entire memory. The following status values are supported: other(1) : ECC is not supported. ok(2) : The correctable error count is below threshold. degraded(3) : The correctable error count has exceeded threshold.
.1.3.6.1.4.1.232.2.2.4.16,CPQSINFO-MIB::cpqSiMemConfigChangeData,OCTET,read-only,,mandatory,,Text string for the memory configuration change trap.
.1.3.6.1.4.1.232.2.2.4.17,CPQSINFO-MIB::cpqSiServerSystemId,OCTET,read-only,,mandatory,,A Server System ID. This value is used to uniquely identify systems via a unique ID on systems that do not support the EISA bus.
.1.3.6.1.4.1.232.2.2.4.18,CPQSINFO-MIB::cpqSiPowerScheme,INTEGER,read-only,,optional,unsupported(1):other(2):power-saver(3):balanced(4):high-performance(5):user-defined(6),The current active power plan or power scheme of the system.
.1.3.6.1.4.1.232.2.2.4.19,CPQSINFO-MIB::cpqSiPowerSchemeName,OCTET,read-only,,optional,,The name of current active power plan or power scheme of the system. When cpqSiPowerScheme has a value of user-defined(6), the  user defined name can be populated here.
.1.3.6.1.4.1.232.2.2.4.20,CPQSINFO-MIB::cpqSiCurrentPerformanceStatePointer,INTEGER,read-only,,optional,,Pointer to cpqSiPerfStateIndex in cpqSiPerfStateTable to indicate the current performance state of the system.
.1.3.6.1.4.1.232.2.2.4.21,CPQSINFO-MIB::cpqSiMinPerformanceState,INTEGER,read-only,,optional,,The slowest performance state by the selected power state policy.
.1.3.6.1.4.1.232.2.2.4.22,CPQSINFO-MIB::cpqSiMaxPerformanceState,INTEGER,read-only,,optional,,The fastest performance state supported by the selected power state policy.
.1.3.6.1.4.1.232.2.2.4.23,CPQSINFO-MIB::cpqSiPerfStateTable,,not-accessible,,optional,,A table of supported performance states of the system.
.1.3.6.1.4.1.232.2.2.4.23.1,CPQSINFO-MIB::cpqSiPerfStateEntry,,not-accessible,cpqSiPerfStateIndex,optional,,An entry describing a supported performance state of the system.
.1.3.6.1.4.1.232.2.2.4.23.1.1,CPQSINFO-MIB::cpqSiPerfStateIndex,INTEGER,read-only,,optional,,Index into the performance state table. cpqSiCurrentPerformanceStatePointer should point to one of these values.
.1.3.6.1.4.1.232.2.2.4.23.1.2,CPQSINFO-MIB::cpqSiPerfState,INTEGER,read-only,,optional,,Performance state number. A unique number assigned to a performance state instance.
.1.3.6.1.4.1.232.2.2.4.23.1.3,CPQSINFO-MIB::cpqSiPerfStateCpuFrequency,INTEGER,read-only,,optional,,The processor frequency in megahertz for this performance state instance.
.1.3.6.1.4.1.232.2.2.4.23.1.4,CPQSINFO-MIB::cpqSiPerfStateCpuPower,INTEGER,read-only,,optional,,The processor power setting in milliwatts for this performance state instance.
.1.3.6.1.4.1.232.2.2.4.24,CPQSINFO-MIB::cpqSiTPMmodule,INTEGER,read-only,,optional,other(1):absent(2):presentEnabled(3):presentDisabled(4),This field will be populated if TPM module is present in the system board. other(1) No record of TPM exist. absent(2) TPM module is not present in the system. presentEnabled(3) TPM module is present in the system and currently enabled. presentDisabled(4) TPM module is present in the system and currently not enabled.
.1.3.6.1.4.1.232.2.2.5,CPQSINFO-MIB::cpqSiBoardRev,,,,,,
.1.3.6.1.4.1.232.2.2.5.1,CPQSINFO-MIB::cpqSiCurRevDate,OCTET,read-only,,mandatory,,The current board revision configuration date in MM/DD/YY format. This is the date that the EISA Configuration Utility was used to define the current configuration. This value will contain 'N/A' if this system does not support this feature.
.1.3.6.1.4.1.232.2.2.5.2,CPQSINFO-MIB::cpqSiPrevRevDate,OCTET,read-only,,mandatory,,The previous board revision configuration date in MM/DD/YY format. This is the date that the EISA Configuration Utility was used to define the previous configuration. This value will contain 'N/A' if this system does not support this feature.
.1.3.6.1.4.1.232.2.2.5.3,CPQSINFO-MIB::cpqSiBoardRevTable,,not-accessible,,mandatory,,A table of board revision descriptions.
.1.3.6.1.4.1.232.2.2.5.3.1,CPQSINFO-MIB::cpqSiBoardRevEntry,,not-accessible,cpqSiBoardRevSlotIndex:cpqSiBoardRevIndex,mandatory,,A board revision description.
.1.3.6.1.4.1.232.2.2.5.3.1.1,CPQSINFO-MIB::cpqSiBoardRevSlotIndex,INTEGER,read-only,,mandatory,,The slot in which the board described in this entry resides. Zero (0) indicates the system board.
.1.3.6.1.4.1.232.2.2.5.3.1.2,CPQSINFO-MIB::cpqSiBoardRevIndex,INTEGER,read-only,,mandatory,,A number that uniquely specifies which board in a specific slot is described in this entry. Zero (0) indicates the main board in this slot. Any other number indicates a daughter board or a component of the main board.
.1.3.6.1.4.1.232.2.2.5.3.1.3,CPQSINFO-MIB::cpqSiBoardRevId,OCTET,read-only,,mandatory,,A description of the board type. The defined types are: Type ============== System Board Processor n (n = the processor number) Memory n (n = the memory board number) Slot n (n = the slot the board occupies) Other types may be defined at a later date.
.1.3.6.1.4.1.232.2.2.5.3.1.4,CPQSINFO-MIB::cpqSiBoardRevCur,OCTET,read-only,,mandatory,,The current revision for the board described in this entry. This value will be N/A if there is no current revision information.
.1.3.6.1.4.1.232.2.2.5.3.1.5,CPQSINFO-MIB::cpqSiBoardRevPrev,OCTET,read-only,,mandatory,,The revision for the board described in this entry prior to the current configuration. This value will be N/A if there is no previous revision information.
.1.3.6.1.4.1.232.2.2.5.3.1.6,CPQSINFO-MIB::cpqSiBoardRevHwLocation,OCTET,read-only,,optional,,A text description of the hardware location, on complex multi SBB hardware only, for the board. A NULL string indicates that the hardware location could not be determined or is irrelevant.
.1.3.6.1.4.1.232.2.2.5.4,CPQSINFO-MIB::cpqSiFirmwareRevTable,,not-accessible,,mandatory,,A table of firmware revision descriptions.
.1.3.6.1.4.1.232.2.2.5.4.1,CPQSINFO-MIB::cpqSiFirmwareRevEntry,,not-accessible,cpqSiFirmwareRevIndex,mandatory,,A firmware revision description.
.1.3.6.1.4.1.232.2.2.5.4.1.1,CPQSINFO-MIB::cpqSiFirmwareRevIndex,INTEGER,read-only,,mandatory,,Locally-unique index for this entry.
.1.3.6.1.4.1.232.2.2.5.4.1.2,CPQSINFO-MIB::cpqSiFirmwareRevDesc,OCTET,read-only,,mandatory,,Description, e.g. SRM console, ARC console, System BIOS, etc.
.1.3.6.1.4.1.232.2.2.5.4.1.3,CPQSINFO-MIB::cpqSiFirmwareRevString,OCTET,read-only,,mandatory,,Version number, possibly of the form Vx.y or Vx.y-z.
.1.3.6.1.4.1.232.2.2.5.4.1.4,CPQSINFO-MIB::cpqSiFirmwareRevCellTablePtr,INTEGER,read-only,,deprecated,,Index for the cell in cpqSeCellTable where this firmware is located
.1.3.6.1.4.1.232.2.2.5.4.1.5,CPQSINFO-MIB::cpqSiFirmwareLocation,OCTET,read-only,,optional,,Description of which board the firmware is located in.
.1.3.6.1.4.1.232.2.2.5.4.1.6,CPQSINFO-MIB::cpqSiFirmwareStatus,INTEGER,read-only,,optional,unknown(1):active(2):inactive(3),The current status for this firmware.
.1.3.6.1.4.1.232.2.2.5.5,CPQSINFO-MIB::cpqSiFirmwareCfgTable,,not-accessible,,mandatory,,Table of soft switches and symbols maintained by the firmware. May be operating system and/or option-specific and will certainly be system-specific. This list is intended to be easily extensible and support arbitrary datatypes. It includes such switches as powerup options, default dump device, etc. Note - the string comparison for svrFwSymbolName is case insensitive.
.1.3.6.1.4.1.232.2.2.5.5.1,CPQSINFO-MIB::cpqSiFirmwareCfgEntry,,not-accessible,cpqSiFirmwareCfgName,mandatory,,Each entry represents one variable or symbol maintained by or stored by some instance of firmware in the system.
.1.3.6.1.4.1.232.2.2.5.5.1.1,CPQSINFO-MIB::cpqSiFirmwareCfgName,OCTET,read-only,,mandatory,,The firmware configuration symbol name as visible from the console.
.1.3.6.1.4.1.232.2.2.5.5.1.2,CPQSINFO-MIB::cpqSiFirmwareCfgValue,OCTET,read-only,,mandatory,,The firmware configuration symbol value. Null if none or unknown.
.1.3.6.1.4.1.232.2.2.6,CPQSINFO-MIB::cpqSiRackServer,,,,,,
.1.3.6.1.4.1.232.2.2.6.1,CPQSINFO-MIB::cpqSiRackServerShutdownRole,INTEGER,read-write,,mandatory,other(1):master(2):slave(3),This entry describes this system's role in a rack-mounted uninterruptible power supply family. The master both communicates with the UPS and derives its power from the UPS. The slave derives its power from the UPS, but does not communicate with it.
.1.3.6.1.4.1.232.2.2.6.2,CPQSINFO-MIB::cpqSiRackServerMasterName,OCTET,read-write,,mandatory,,This entry describes the name of the master server in a rack-mounted uninterruptible power supply family. A slave system would communicate with this server to derive UPS status.
.1.3.6.1.4.1.232.2.2.7,CPQSINFO-MIB::cpqSiVideo,,,,,,
.1.3.6.1.4.1.232.2.2.7.1,CPQSINFO-MIB::cpqSiVideoEdidRaw,OCTET,read-only,,deprecated,,The raw value returned from the video EDID function.
.1.3.6.1.4.1.232.2.2.7.2,CPQSINFO-MIB::cpqSiVideoDesc,OCTET,read-only,,deprecated,,The manufacturer and model description of the video display.
.1.3.6.1.4.1.232.2.2.7.3,CPQSINFO-MIB::cpqSiVideoSerialNumber,OCTET,read-only,,deprecated,,The serial number of the video display.
.1.3.6.1.4.1.232.2.2.7.4,CPQSINFO-MIB::cpqSiVideoManufactureDate,OCTET,read-only,,deprecated,,The date of manufacture of the video display in the following format: field octets contents range ===== ====== ======= ===== 1 1-2 year 0..65536 2 3 month 1..12 3 4 day 1..31 4 5 hour 0..23 5 6 minute 0..59 6 7 second 0..60 (use 60 for leap-second) This field will be set to year = 0 if the agent cannot provide the date. The date information that is given resolves to a year and week, so the hour, minute, and second field will be set to 0, the month and day fields will give the monday of the week of manufacture.
.1.3.6.1.4.1.232.2.2.7.5,CPQSINFO-MIB::cpqSiVideoHeight,INTEGER,read-only,,deprecated,,The maximum image height of the video display in centimeters
.1.3.6.1.4.1.232.2.2.7.6,CPQSINFO-MIB::cpqSiVideoWidth,INTEGER,read-only,,deprecated,,The maximum image width of the video display in centimeters
.1.3.6.1.4.1.232.2.2.7.7,CPQSINFO-MIB::cpqSiVideoMaxHorPixel,INTEGER,read-only,,deprecated,,The number of horizontal pixels in the highest resolution video mode supported.
.1.3.6.1.4.1.232.2.2.7.8,CPQSINFO-MIB::cpqSiVideoMaxVertPixel,INTEGER,read-only,,deprecated,,The number of vertical pixels in the highest resolution video mode supported.
.1.3.6.1.4.1.232.2.2.7.9,CPQSINFO-MIB::cpqSiVideoMaxRefreshRate,INTEGER,read-only,,deprecated,,The video refresh rate in Hz of the highest resolution video mode supported.
.1.3.6.1.4.1.232.2.2.8,CPQSINFO-MIB::cpqSiMonitor,,,,,,
.1.3.6.1.4.1.232.2.2.8.1,CPQSINFO-MIB::cpqSiMonitorOverallCondition,INTEGER,read-only,,mandatory,other(1):ok(2):degraded(3):failed(4),This value specifies the overall condition of the system's monitor(s). The following conditions are supported: other(1) The monitor does not support fault reporting or condition is unknown. ok(2) The monitor is operating OK. degraded(3) The monitor has detected a fault. The monitor is still useable but action should be taken to return the monitor to ok. failed(4) The monitor has detected a fault. The monitor will not be useable. Action should be taken to replace the monitor.
.1.3.6.1.4.1.232.2.2.8.2,CPQSINFO-MIB::cpqSiMonitorTable,,not-accessible,,mandatory,,A table of all video monitor descriptions connected to this system.
.1.3.6.1.4.1.232.2.2.8.2.1,CPQSINFO-MIB::cpqSiMonitorEntry,,not-accessible,cpqSiMonitorIndex,mandatory,,A video monitor description.
.1.3.6.1.4.1.232.2.2.8.2.1.1,CPQSINFO-MIB::cpqSiMonitorIndex,INTEGER,read-only,,mandatory,,A unique index for each video display connected to the system.
.1.3.6.1.4.1.232.2.2.8.2.1.2,CPQSINFO-MIB::cpqSiMonitorEdidRaw,OCTET,read-only,,mandatory,,The raw value returned from the video EDID function.
.1.3.6.1.4.1.232.2.2.8.2.1.3,CPQSINFO-MIB::cpqSiMonitorDesc,OCTET,read-only,,mandatory,,The manufacturer and model description of the video display.
.1.3.6.1.4.1.232.2.2.8.2.1.4,CPQSINFO-MIB::cpqSiMonitorSerialNumber,OCTET,read-only,,mandatory,,The serial number of the video display.
.1.3.6.1.4.1.232.2.2.8.2.1.5,CPQSINFO-MIB::cpqSiMonitorManufactureDate,OCTET,read-only,,mandatory,,The date of manufacture of the video display in the following format: field octets contents range ===== ====== ======= ===== 1 1-2 year 0..65536 2 3 month 1..12 3 4 day 1..31 4 5 hour 0..23 5 6 minute 0..59 6 7 second 0..60 (use 60 for leap-second) This field will be set to year = 0 if the agent cannot provide the date. The date information that is given resolves to a year and week, so the hour, minute, and second field will be set to 0, the month and day fields will give the monday of the week of manufacture.
.1.3.6.1.4.1.232.2.2.8.2.1.6,CPQSINFO-MIB::cpqSiMonitorHeight,INTEGER,read-only,,mandatory,,The maximum image height of the video display in centimeters
.1.3.6.1.4.1.232.2.2.8.2.1.7,CPQSINFO-MIB::cpqSiMonitorWidth,INTEGER,read-only,,mandatory,,The maximum image width of the video display in centimeters
.1.3.6.1.4.1.232.2.2.8.2.1.8,CPQSINFO-MIB::cpqSiMonitorMaxHorPixel,INTEGER,read-only,,mandatory,,The number of horizontal pixels in the highest resolution video mode supported.
.1.3.6.1.4.1.232.2.2.8.2.1.9,CPQSINFO-MIB::cpqSiMonitorMaxVertPixel,INTEGER,read-only,,mandatory,,The number of vertical pixels in the highest resolution video mode supported.
.1.3.6.1.4.1.232.2.2.8.2.1.10,CPQSINFO-MIB::cpqSiMonitorMaxRefreshRate,INTEGER,read-only,,mandatory,,The video refresh rate in Hz of the highest resolution video mode supported.
.1.3.6.1.4.1.232.2.2.8.2.1.11,CPQSINFO-MIB::cpqSiMonitorManufacturer,OCTET,read-only,,mandatory,,The manufacturer of the video display.
.1.3.6.1.4.1.232.2.2.8.2.1.12,CPQSINFO-MIB::cpqSiMonitorThermalCondition,INTEGER,read-only,,mandatory,other(1):ok(2):degraded(3),This provides the condition of the monitor's internal temperature. This value will be one of the following: other(1) Monitor thermal fault reporting is not supported by this monitor or the Insight Agent does not recognize the status. You may need to upgrade your software. ok(2) The internal temperature is within normal limits. degraded(3) The internal temperature is outside normal operating range.
.1.3.6.1.4.1.232.2.2.8.2.1.13,CPQSINFO-MIB::cpqSiMonitorOperationalCondition,INTEGER,read-only,,mandatory,other(1):ok(2):degraded(3):failed(4),This provides the condition of the monitor's operational features. This condition value will be one of the following: other(1) Monitor operational fault reporting is not supported by this monitor or the Insight Agent does not recognize the status. You may need to upgrade your software. ok(2) The monitor is operating within normal limits. degraded(3) The monitor is not functioning within normal operating limits. At least one of the operational features has become degraded. failed(4) The monitor is not functioning within normal operating limits. At least one of the operational features has failed causing the monitor to not be usable. The monitor should be replaced.
.1.3.6.1.4.1.232.2.2.8.2.1.14,CPQSINFO-MIB::cpqSiMonitorStatus,INTEGER,read-only,,mandatory,other(1):unknown(2):ok(3):thermalDegraded(4):operationalFailure(5),This provides the status of the monitor's fault reporting features. This status value will be one of the following: other(1) Monitor fault reporting is not supported by this monitor or the Insight Agent does not recognize the status. You may need to upgrade your software. unknown(2) The monitor status is unknown because the monitor is either in power saving mode or it has been turned off. ok(3) The monitor is operating within normal limits. thermalDegraded(4) The monitor's internal temperature is not functioning within normal operating limits. operationalFailure(5) The monitor is not functioning within normal operating limits. At least one of the operational features has failed. The monitor should be replaced.
.1.3.6.1.4.1.232.2.2.9,CPQSINFO-MIB::cpqSiHotPlugSlot,,,,,,
.1.3.6.1.4.1.232.2.2.9.1,CPQSINFO-MIB::cpqSiHotPlugSlotSupported,INTEGER,read-only,,mandatory,other(1):notSupported(2):supported(3),This value specifies if this system supports the Hot Pluggable Slot feature.
.1.3.6.1.4.1.232.2.2.9.2,CPQSINFO-MIB::cpqSiHotPlugSlotCondition,INTEGER,read-only,,mandatory,other(1):ok(2):degraded(3):failed(4),This value specifies the overall condition of the Hot Plug Slot feature. The Hot Plug condition is set as follows: other(1) When Hot Plug Slots are not supported or condition is unknown. ok(2) If there are no hot plug slots with a condition of degraded or failed. degraded(3) If there are degraded slot entries but none failed. failed(4) If there are failed slot entries.
.1.3.6.1.4.1.232.2.2.9.3,CPQSINFO-MIB::cpqSiHotPlugSlotChangeCount,INTEGER,read-only,,mandatory,,This value will be incremented each time a hot plug event occurs resulting in a change in the hot plug slot table.
.1.3.6.1.4.1.232.2.2.9.4,CPQSINFO-MIB::cpqSiHotPlugSlotTable,,not-accessible,,mandatory,,A list of Hot Plug Slot information entries.
.1.3.6.1.4.1.232.2.2.9.4.1,CPQSINFO-MIB::cpqSiHotPlugSlotEntry,,not-accessible,cpqSiHotPlugSlotChassis:cpqSiHotPlugSlotIndex,mandatory,,A description of a Hot Plug Slot.
.1.3.6.1.4.1.232.2.2.9.4.1.1,CPQSINFO-MIB::cpqSiHotPlugSlotChassis,INTEGER,read-only,,mandatory,,The Chassis where this hot plug slot resides.
.1.3.6.1.4.1.232.2.2.9.4.1.2,CPQSINFO-MIB::cpqSiHotPlugSlotIndex,INTEGER,read-only,,mandatory,,The slot within the chassis for this hot plug slot.
.1.3.6.1.4.1.232.2.2.9.4.1.3,CPQSINFO-MIB::cpqSiHotPlugSlotBoardPresent,INTEGER,read-only,,mandatory,other(1):present(2):absent(3):presentButSuspended(4),This value indicates whether a board is present(2) in or absent(3) from the slot. A value of other(1) indicates the information could not be obtained.
.1.3.6.1.4.1.232.2.2.9.4.1.4,CPQSINFO-MIB::cpqSiHotPlugSlotPowerState,INTEGER,read-only,,mandatory,other(1):powerOn(2):powerOff(3),This value is set to powerOn(2) when power is being supplied to the slot and powerOff(3) when power is not being supplied. A value of other(1) indicates the information could not be obtained.
.1.3.6.1.4.1.232.2.2.9.4.1.5,CPQSINFO-MIB::cpqSiHotPlugSlotBoardCondition,INTEGER,read-only,,mandatory,other(1):ok(2):degraded(3):failed(4),This value specifies the condition of the hot plug slot. The hot plug condition is set as follows: other(1) When the condition could not be determined. ok(2) The slot is powered up and operating normally. degraded(3) If the board in the slot is not fully functioning. failed(4) If the slot is failed for any reason. See the status code for more information on the failure.
.1.3.6.1.4.1.232.2.2.9.4.1.6,CPQSINFO-MIB::cpqSiHotPlugSlotErrorStatus,INTEGER,read-only,,mandatory,noError(1):generalError(2):wrongRevision(3):wrongBoard(4):cannotConfig(5):powerFault(6):unexpectedPowerLoss(7):wrongSpeed(8):functionalFailure(9),This value specifies the status of the hot plug slot. The hot plug slot status is set as follows: noError(1) The slot is operating normally. generalError(2) A general error occurred. wrongRevision(3) The revision of the replacement adapter was different from the original adapter. wrongBoard(4) The model of the replacement adapter was different from the original adapter. cannotConfig(5) The adapter could not be configured. powerFault(6) A power fault occurred for the slot. unexpectedPowerLoss(7) Power was unexpectedly lost from the slot. wrongSpeed(8) The adapter cannot be run at the current bus speed. functionlFailure(9) The adapter is not functioning correctly. This may be caused by a cabling problem.
.1.3.6.1.4.1.232.2.2.9.4.1.7,CPQSINFO-MIB::cpqSiHotPlugSlotHwLocation,OCTET,read-only,,optional,,A text description of the hardware location, on complex multi SBB hardware only, for the hot plug slot. A NULL string indicates that the hardware location could not be determined or is irrelevant.
.1.3.6.1.4.1.232.2.2.10,CPQSINFO-MIB::cpqSiSystemBattery,,,,,,
.1.3.6.1.4.1.232.2.2.10.1,CPQSINFO-MIB::cpqSiSystemBatteryOverallCondition,INTEGER,read-only,,mandatory,other(1):ok(2):degraded(3):failed(4),This value specifies the overall condition of all of the system batteries. The following conditions are supported: other(1) The system does not use system batteries or the battery condition is unknown. ok(2) All System Batteries are operating OK. degraded(3) One or more of the System Batteries has degraded. The degraded battery will continue to function but should be replaced. failed(4) One of more of the System Batteries has failed. The failed battery is no longer usable. Action should be taken to replace the battery.
.1.3.6.1.4.1.232.2.2.10.2,CPQSINFO-MIB::cpqSiSysBatteryTable,,not-accessible,,mandatory,,A table of System Batteries.
.1.3.6.1.4.1.232.2.2.10.2.1,CPQSINFO-MIB::cpqSiSysBatteryEntry,,not-accessible,cpqSiSysBatteryIndex,mandatory,,A system battery description.
.1.3.6.1.4.1.232.2.2.10.2.1.1,CPQSINFO-MIB::cpqSiSysBatteryIndex,INTEGER,read-only,,mandatory,,A unique index for this battery entry.
.1.3.6.1.4.1.232.2.2.10.2.1.2,CPQSINFO-MIB::cpqSiSysBatteryModel,OCTET,read-only,,mandatory,,The model name for this battery.
.1.3.6.1.4.1.232.2.2.10.2.1.3,CPQSINFO-MIB::cpqSiSysBatterySerialNum,OCTET,read-only,,mandatory,,The serial number for this battery.
.1.3.6.1.4.1.232.2.2.10.2.1.4,CPQSINFO-MIB::cpqSiSysBatteryAssetTag,OCTET,read-only,,mandatory,,This is the customer changeable battery identifier that is set to this system battery's serial number at the time of manufacture. The string will be empty if the battery does support this function.
.1.3.6.1.4.1.232.2.2.10.2.1.5,CPQSINFO-MIB::cpqSiSysBatteryManufacturer,OCTET,read-only,,mandatory,,The battery's manufacturer's name. The string will be empty if the battery does support this function.
.1.3.6.1.4.1.232.2.2.10.2.1.6,CPQSINFO-MIB::cpqSiSysBatteryDate,OCTET,read-only,,mandatory,,The battery's manufacture date. field octets contents range ===== ====== ======= ===== 1 1-2 year 0..65536 2 3 month 1..12 3 4 day 1..31 4 5 hour 0..23 5 6 minute 0..59 6 7 second 0..60 (use 60 for leap-second) This field will be set to year = 0 if the agent cannot provide the module date. The hour, minute, and second field will be set to zero (0) if they are not relevant. The year field is set with the most significant octet first. The string will be empty if the battery does support this function.
.1.3.6.1.4.1.232.2.2.10.2.1.7,CPQSINFO-MIB::cpqSiSysBatterySmartVersion,OCTET,read-only,,mandatory,,The Smart Battery Data Specification version number supported by this battery. The string will be empty if the system battery does support this function.
.1.3.6.1.4.1.232.2.2.10.2.1.8,CPQSINFO-MIB::cpqSiSysBatteryCondition,INTEGER,read-only,,mandatory,other(1):ok(2):degraded(3):failed(4),This provides the current condition of this system battery. The following status values are supported: other(1) The battery does not support condition monitoring or the Insight Agent cannot determine condition. ok(2) The battery is operating normally. No user action is required. degraded(3) The battery is degraded. The battery is still usable but should be replaced. failed(4) The battery has failed. The battery is no longer usable and should be replaced soon.
.1.3.6.1.4.1.232.2.2.10.2.1.9,CPQSINFO-MIB::cpqSiSysBatteryStatus,INTEGER,read-only,,mandatory,other(1):ok(2):capacityDegraded(3):chargeFault(4):batteryFailure(5),This provides the current status of the battery. The following status values are supported: other(1): This battery does not support status reporting. ok(2): The battery is operating ok. User Action: No action required. capacityDegraded(3): Significant battery degradation has occurred. The battery can no longer be fully recharged. User Action: If using multiple batteries, run the Power Conservation Utility to identify the battery location. Contact your System Administrator or Authorized Reseller to order a replacement battery. chargeFault(4): One or more batteries are not functioning properly. User Action: Make sure all batteries are operating in the recommended temperature range. Check for foreign objects in the battery slots. Remove and reinsert all batteries to resume normal battery operation. Contact your System Administrator or Authorized Reseller if you are still experiencing problems. batteryFailure(5): The battery has failed and must be replaced. User Action: Contact your System Administrator or Authorized Reseller to order a replacement battery. Recycle your old battery. For proper disposal information, refer to the documentation that came with your computer.
.1.3.6.1.4.1.232.2.2.10.2.1.10,CPQSINFO-MIB::cpqSiSysBatteryChemistry,INTEGER,read-only,,mandatory,other(1):unknown(2):lead-Acid(3):nickel-Cadmium(4):nickel-Metal-Hydride(5):lithium-Ion(6):zinc-Air(7):lithium-Polymer(8),The chemistry of the battery.
.1.3.6.1.4.1.232.2.2.10.2.1.11,CPQSINFO-MIB::cpqSiSysBatteryRemainingCap,INTEGER,read-only,,mandatory,,This is a percentage of the battery's remaining capacity from its design capacity. If this attribute is not supported, 65535 is returned.
.1.3.6.1.4.1.232.2.2.10.2.1.12,CPQSINFO-MIB::cpqSiSysBatteryFirmwareRevision,INTEGER,read-only,,mandatory,,This is the revision level of the firmware on the battery. If this attribute is not supported, 255 is returned.
.1.3.6.1.4.1.232.2.2.10.2.1.13,CPQSINFO-MIB::cpqSiSysBatteryHardwareRevision,INTEGER,read-only,,mandatory,,This is the revision level of the hardware on the battery. If this attribute is not supported, 255 is returned.
.1.3.6.1.4.1.232.2.2.10.2.1.14,CPQSINFO-MIB::cpqSiSysBatteryFullCap,INTEGER,read-only,,mandatory,,This is the mWatt-Hours of the battery's Full capacity on the current charge. If this attribute is not supported, 65535 is returned.
.1.3.6.1.4.1.232.2.2.10.2.1.15,CPQSINFO-MIB::cpqSiSysBatteryDesignCap,INTEGER,read-only,,mandatory,,This is the mWatt-Hours of the battery's design capacity as specified by the manufacturer. If this attribute is not supported, 65535 is returned.
.1.3.6.1.4.1.232.2.2.10.2.1.16,CPQSINFO-MIB::cpqSiSysBatteryHwLocation,OCTET,read-only,,optional,,A text description of the hardware location, on complex multi SBB hardware only, for the battery. A NULL string indicates that the hardware location could not be determined or is irrelevant.
.1.3.6.1.4.1.232.2.2.11,CPQSINFO-MIB::cpqSiDockingStation,,,,,,
.1.3.6.1.4.1.232.2.2.11.1,CPQSINFO-MIB::cpqSiDockingStationStatus,INTEGER,read-only,,mandatory,notSupported(1):docked(2):undocked(3),This value specifies the connection of the computer system to a docking station. The following connection states are supported: notSupported(1) This system does not interface to a docking station. docked(2) This system is connected to a docking station. undocked(3) This system is not connect to a docking station.
.1.3.6.1.4.1.232.2.2.11.2,CPQSINFO-MIB::cpqSiDockingStationSerialNum,OCTET,read-only,,mandatory,,The serial number of the docking station. The string will be empty if the docking station does not support a serial or the system does not interface to a docking station.
.1.3.6.1.4.1.232.2.2.11.3,CPQSINFO-MIB::cpqSiDockingStationModel,OCTET,read-only,,mandatory,,The model name of the docking station. The string will be empty if the docking station does not report the model name or the system does not interface to a docking station.
.1.3.6.1.4.1.232.2.2.11.4,CPQSINFO-MIB::cpqSiDockingStationAssetTag,OCTET,read-only,,mandatory,,This is a customer changeable identifier that is set to the docking station serial number at the time of manufacture. The string will be empty if the docking station does not report an asset tag or the system does not interface to a docking station.
.1.3.6.1.4.1.232.2.2.12,CPQSINFO-MIB::cpqSiFru,,,,,,
.1.3.6.1.4.1.232.2.2.12.1,CPQSINFO-MIB::cpqSiFruTable,,not-accessible,,mandatory,,Table of Field Replaceable Units of system, providing inventory and asset control information. This table is referenced from logical hardware descriptions elsewhere in the MIB.
.1.3.6.1.4.1.232.2.2.12.1.1,CPQSINFO-MIB::cpqSiFruEntry,,not-accessible,cpqSiFruIndex,mandatory,,Each entry represents a Field Replaceable Unit (FRU) of hardware.
.1.3.6.1.4.1.232.2.2.12.1.1.1,CPQSINFO-MIB::cpqSiFruIndex,INTEGER,read-only,,mandatory,,A locally-unique index value.
.1.3.6.1.4.1.232.2.2.12.1.1.2,CPQSINFO-MIB::cpqSiFruType,INTEGER,read-only,,mandatory,unknown(1):other(2):motherBoard(3):processor(4):memoryCard(5):memoryModule(6):peripheralDevice(7):systemBusBridge(8):powerSupply(9):chassis(10):fan(11):ioCard(12),General category of the type of FRU that this is.
.1.3.6.1.4.1.232.2.2.12.1.1.3,CPQSINFO-MIB::cpqSiFruDescr,OCTET,read-write,,mandatory,,More detailed description of FRU type, if known.
.1.3.6.1.4.1.232.2.2.12.1.1.4,CPQSINFO-MIB::cpqSiFruVendor,OCTET,read-only,,mandatory,,Manufacturer name or ID.
.1.3.6.1.4.1.232.2.2.12.1.1.5,CPQSINFO-MIB::cpqSiFruPartNumber,OCTET,read-only,,mandatory,,Number by which this unit is orderable.
.1.3.6.1.4.1.232.2.2.12.1.1.6,CPQSINFO-MIB::cpqSiFruRevision,OCTET,read-only,,mandatory,,Version number of this unit. If artwork level is available, it will appear as 'Artwork: XXX' following FRU version portion.
.1.3.6.1.4.1.232.2.2.12.1.1.7,CPQSINFO-MIB::cpqSiFruFirmwareRevision,OCTET,read-only,,mandatory,,The revision of the firmware, if any. Otherwise null.
.1.3.6.1.4.1.232.2.2.12.1.1.8,CPQSINFO-MIB::cpqSiFruSerialNumber,OCTET,read-only,,mandatory,,The serial number of this unit's instance.
.1.3.6.1.4.1.232.2.2.12.1.1.9,CPQSINFO-MIB::cpqSiFruAssetNo,OCTET,read-write,,mandatory,,The asset number for this unit. This string may be limited.
.1.3.6.1.4.1.232.2.2.12.1.1.10,CPQSINFO-MIB::cpqSiFruClass,INTEGER,read-only,,mandatory,unknown(1):other(2):currentBoardInSlot(3):priorBoardInSlot(4):parentBoard(5):priorParentBoard(6):priorParentSystem(7),Represents the status category of the unit.
.1.3.6.1.4.1.232.2.2.12.1.1.11,CPQSINFO-MIB::cpqSiFruSlotNumber,OCTET,read-only,,mandatory,,Physical slot number of FRU.
.1.3.6.1.4.1.232.2.2.12.1.1.12,CPQSINFO-MIB::cpqSiFruSubAssemblyNumber,INTEGER,read-only,,mandatory,,Subassembly containing this FRU. From FRU V5.0.
.1.3.6.1.4.1.232.2.2.12.1.1.13,CPQSINFO-MIB::cpqSiFruAssemblyNumber,INTEGER,read-only,,mandatory,,Assembly containing this FRU. From FRU V5.0.
.1.3.6.1.4.1.232.2.2.12.1.1.14,CPQSINFO-MIB::cpqSiFruChassisNumber,INTEGER,read-only,,mandatory,,Chassis containing this FRU. From FRU V5.0.
.1.3.6.1.4.1.232.2.2.12.1.1.15,CPQSINFO-MIB::cpqSiFruPositionNumber,INTEGER,read-only,,mandatory,,Position in Chassis to help locate FRU. From FRU V5.0.
.1.3.6.1.4.1.232.2.2.12.1.1.16,CPQSINFO-MIB::cpqSiFruCabinetIDNumber,INTEGER,read-only,,mandatory,,Cabinet number containing this FRU. From FRU V5.0.
.1.3.6.1.4.1.232.2.2.12.1.1.17,CPQSINFO-MIB::cpqSiFruSiteLocation,INTEGER,read-only,,mandatory,,Site code for system containing this FRU. From FRU V5.0.
.1.3.6.1.4.1.232.2.2.12.1.1.18,CPQSINFO-MIB::cpqSiFruDiagStatus,INTEGER,read-only,,mandatory,unknown(1):ok(2):degraded(3):failed(4):disabled(5),Use system status values to describe current state of the FRU.
.1.3.6.1.4.1.232.2.2.12.1.1.19,CPQSINFO-MIB::cpqSiFruExtendedDiagStatus,INTEGER,read-only,,mandatory,,Diagnostic Status value returned by Device Specific  diagnostics. Usually through a diagnostic status register on the device. See product manual for bit descriptions.
.1.3.6.1.4.1.232.2.2.12.1.1.20,CPQSINFO-MIB::cpqSiFruCellTablePtr,INTEGER,read-only,,optional,,Index for the cell in cpqSeCellTable where this FRU is physically located.
.1.3.6.1.4.1.232.2.2.12.1.1.21,CPQSINFO-MIB::cpqSiFruIOCTablePtr,INTEGER,read-only,,optional,,Index for the I/O Chassis in cpqSeIOCTablePtr where this FRU is physically located
.1.3.6.1.4.1.232.2.2.12.1.1.22,CPQSINFO-MIB::cpqSiFruFileId,OCTET,read-only,,optional,,This represents the FRU file identifier
.1.3.6.1.4.1.232.2.2.12.1.1.23,CPQSINFO-MIB::cpqSiFruScanRev,OCTET,read-only,,optional,,This represents FRU scan revision
.1.3.6.1.4.1.232.2.2.13,CPQSINFO-MIB::cpqSiRackEnclosure,,,,,,
.1.3.6.1.4.1.232.2.2.13.1,CPQSINFO-MIB::cpqSiRackEnclosureMgrTable,,not-accessible,,mandatory,,Table of possible rack and/or enclosure based systems.
.1.3.6.1.4.1.232.2.2.13.1.1,CPQSINFO-MIB::cpqSiRackEnclosureMgrEntry,,not-accessible,cpqSiRackEnclosureMgrIndex,mandatory,,A entry for a rack and/or enclosure based system.
.1.3.6.1.4.1.232.2.2.13.1.1.1,CPQSINFO-MIB::cpqSiRackEnclosureMgrIndex,INTEGER,read-only,,mandatory,,A locally-unique index value.
.1.3.6.1.4.1.232.2.2.13.1.1.2,CPQSINFO-MIB::cpqSiRackEnclosureMgrType,INTEGER,read-only,,mandatory,other(1):noEnclosureManagement(2):enclosureManagement(3):onboardAdminManagement(4),This value specifies the type of enclosure management. other(1) When the type not be determined. noEnclosureManagement(2) The server is part of a rack/enclosure managed system, but there is no dedicated enclosure manager. enclosureManagement(3) The server is part of a rack/enclosure managed system with a dedicated enclosure manager.  onboardAdminManagement(4) The server is part of a rack/enclosure managed system with a onboard Administrator.
.1.3.6.1.4.1.232.2.2.13.1.1.3,CPQSINFO-MIB::cpqSiRackEnclosureMgrIpAddr,OCTET,read-only,,mandatory,,The IP address of the rack enclosure manager. The string will be empty if the enclosure does not report the information or it could not be determined.
.1.3.6.1.4.1.232.2.2.13.1.1.4,CPQSINFO-MIB::cpqSiRackEnclosureMgrWebLink,OCTET,read-only,,mandatory,,The web link to the enclosure managers web based management information for the enclosure. The string will be empty if the enclosure does not report the information or it could not be determined.
.1.3.6.1.4.1.232.2.2.13.1.1.5,CPQSINFO-MIB::cpqSiRackEnclosureMgrCondition,INTEGER,read-only,,mandatory,other(1):ok(2):degraded(3):failed(4),The overall condition of the Enclosure. For more detailed status information, follow the cpqSiEnclosureMgrWebLink through the Web Management Agent interface. other(1) This is the default condition for systems when cpqSiRackEnclosureMgrType has a value of noEnclosureManagement(2). When cpqSiRackEnclosureMgrType has a value of enclosureManagement(3), this indicates the status of the enclosure manager could not be determined. ok(2) The enclosure manager is in an ok state. Follow the cpqSiRackEnclosureMgrWebLink link in the Web Management Agents to manage the enclosure. degraded(3) The enclosure manager is in a degraded state. Follow the cpqSiRackEnclosureMgrWebLink link in the Web Management Agents to manage the enclosure. failed(4) The enclosure manager is in a failed state. Follow the cpqSiRackEnclosureMgrWebLink link in the Web Management Agents to manage the enclosure.
.1.3.6.1.4.1.232.2.2.13.1.1.6,CPQSINFO-MIB::cpqSiRackEnclosureMgrSerialNumber,OCTET,read-only,,mandatory,,The serial number of the enclosure. The string will be empty if the enclosure does not report the information or it could not be determined.
.1.3.6.1.4.1.232.2.2.13.1.1.7,CPQSINFO-MIB::cpqSiRackEnclosureMgrModel,OCTET,read-only,,optional,,The model name of the enclosure. The string will be empty if it could not be determined.
.1.3.6.1.4.1.232.2.2.13.1.1.8,CPQSINFO-MIB::cpqSiRackEnclosureMgrName,OCTET,read-only,,optional,,The name of the enclosure. This name logically groups together the  Blade servers installed in the same enclosure and it is shared  with the other servers in the enclosure. The string will be empty if it could not be determined.
.1.3.6.1.4.1.232.2.2.13.1.1.9,CPQSINFO-MIB::cpqSiRackEnclosureMgrFwRev,OCTET,read-only,,optional,,The Firmware revision of the Enclosure Manager/Onboard Administrator. The string will be empty if it could not be determined.
.1.3.6.1.4.1.232.2.2.13.1.1.10,CPQSINFO-MIB::cpqSiRackEnclosureMgrProductID,OCTET,read-only,,optional,,The Enclosure product identifier. The string will be empty  if it could not be determined.
.1.3.6.1.4.1.232.2.2.13.1.1.11,CPQSINFO-MIB::cpqSiRackEnclosureMgrUUID,OCTET,read-only,,optional,,The Enclosure unique identifier. The string will be empty  if it could not be determined.
.1.3.6.1.4.1.232.2.2.14,CPQSINFO-MIB::cpqSiServerBlade,,,,,,
.1.3.6.1.4.1.232.2.2.14.1,CPQSINFO-MIB::cpqSiServerBladeEnclosureBayNumber,INTEGER,read-only,,optional,,This value specifies the enclosure bay number occupied by the blade. In case of a blade occupying multiple bays, this will be the lowest enclosure bay number of all the bay numbers occupied by this balde
.1.3.6.1.4.1.232.2.2.14.2,CPQSINFO-MIB::cpqSiServerBladeHeight,INTEGER,read-only,,optional,unknown(1):halfHeightBlade(2):fullHeightBlade(3),Blade height is the Blade length. unknown(1) This indicates it could not be determined. halfHeightBlade(2) This indicates a half-height server Blade. fullHeightBlade(3) This indicates a full-height server Blade.
.1.3.6.1.4.1.232.2.2.14.3,CPQSINFO-MIB::cpqSiServerBladeWidth,INTEGER,read-only,,optional,unknown(1):singleWide(2):doubleWide(3),Width of the Blade in terms of Enclosure Bays. This pertain to the Blade side that connects to the enclosure backplane.
.1.3.6.1.4.1.232.2.2.15,CPQSINFO-MIB::cpqSiRack,,,,,,
.1.3.6.1.4.1.232.2.2.15.1,CPQSINFO-MIB::cpqSiRackName,OCTET,read-only,,optional,,The rack name. This name is used to logically group together  enclosures in a rack and it is shared with other enclosures  in the rack.  The string will be empty if it could not be determined.
.1.3.6.1.4.1.232.2.2.15.2,CPQSINFO-MIB::cpqSiRackUUID,OCTET,read-only,,optional,,The rack unique identifier. The string will be empty  if it could be determined.
.1.3.6.1.4.1.232.2.2.16,CPQSINFO-MIB::cpqSiMP,,,,,,
.1.3.6.1.4.1.232.2.2.16.1,CPQSINFO-MIB::cpqSiMPHostName,OCTET,read-only,,optional,,The host name of the Management Processor. The string will be empty if it could not be determined.
.1.3.6.1.4.1.232.2.2.16.2,CPQSINFO-MIB::cpqSiMPHealthStatus,INTEGER,read-only,,optional,unknown(1):ok(2):degraded(3):failed(4),The health status of the Management Processor.
.1.3.6.1.4.1.232.11,CPQHOST-MIB::cpqHostOs,,,,,,
.1.3.6.1.4.1.232.11.1,CPQHOST-MIB::cpqHoMibRev,,,,,,
.1.3.6.1.4.1.232.11.1.1,CPQHOST-MIB::cpqHoMibRevMajor,INTEGER,read-only,,mandatory,,The Major Revision level of the MIB. A change in the major revision level represents a major change in the architecture of the MIB. A change in the major revision level may indicate a significant change in the information supported and/or the meaning of the supported information. Correct interpretation of data may require a MIB document with the same major revision level.
.1.3.6.1.4.1.232.11.1.2,CPQHOST-MIB::cpqHoMibRevMinor,INTEGER,read-only,,mandatory,,The Minor Revision level of the MIB. A change in the minor revision level may represent some minor additional support, no changes to any pre-existing information has occurred.
.1.3.6.1.4.1.232.11.1.3,CPQHOST-MIB::cpqHoMibCondition,INTEGER,read-only,,mandatory,unknown(1):ok(2):degraded(3):failed(4),The overall condition. This object represents the overall status of the server's host system represented by this MIB.
.1.3.6.1.4.1.232.11.2,CPQHOST-MIB::cpqHoComponent,,,,,,
.1.3.6.1.4.1.232.11.2.1,CPQHOST-MIB::cpqHoInterface,,,,,,
.1.3.6.1.4.1.232.11.2.1.4,CPQHOST-MIB::cpqHoOsCommon,,,,,,
.1.3.6.1.4.1.232.11.2.1.4.1,CPQHOST-MIB::cpqHoOsCommonPollFreq,INTEGER,read-write,,mandatory,,The Insight Agent's polling frequency. The frequency, in seconds, at which the Insight Agent requests information from the device driver. A frequency of zero (0) indicates that the Insight Agent retrieves the information upon request of a management station, it does not poll the device driver at a specific interval. If the poll frequency is zero (0) all attempts to write to this object will fail. If the poll frequency is non-zero, setting this value will change the polling frequency of the Insight Agent. Setting the poll frequency to zero (0) will always fail. An agent may choose to fail any request to change the poll frequency to a value that would severely impact system performance.
.1.3.6.1.4.1.232.11.2.1.4.2,CPQHOST-MIB::cpqHoOsCommonModuleTable,,not-accessible,,deprecated,,A table of software modules that provide an interface to the device this MIB describes.
.1.3.6.1.4.1.232.11.2.1.4.2.1,CPQHOST-MIB::cpqHoOsCommonModuleEntry,,not-accessible,cpqHoOsCommonModuleIndex,deprecated,,A description of a software module that provides an interface to the device this MIB describes.
.1.3.6.1.4.1.232.11.2.1.4.2.1.1,CPQHOST-MIB::cpqHoOsCommonModuleIndex,INTEGER,read-only,,deprecated,,A unique index for this module description.
.1.3.6.1.4.1.232.11.2.1.4.2.1.2,CPQHOST-MIB::cpqHoOsCommonModuleName,OCTET,read-only,,deprecated,,The module name.
.1.3.6.1.4.1.232.11.2.1.4.2.1.3,CPQHOST-MIB::cpqHoOsCommonModuleVersion,OCTET,read-only,,deprecated,,The module version in XX.YY format. Where XX is the major version number and YY is the minor version number. This field will be null (size 0) string if the agent cannot provide the module version.
.1.3.6.1.4.1.232.11.2.1.4.2.1.4,CPQHOST-MIB::cpqHoOsCommonModuleDate,OCTET,read-only,,deprecated,,The module date. field octets contents range ===== ====== ======= ===== 1 1-2 year 0..65536 2 3 month 1..12 3 4 day 1..31 4 5 hour 0..23 5 6 minute 0..59 6 7 second 0..60 (use 60 for leap-second) This field will be set to year = 0 if the agent cannot provide the module date. The hour, minute, and second field will be set to zero (0) if they are not relevant. The year field is set with the most significant octet first.
.1.3.6.1.4.1.232.11.2.1.4.2.1.5,CPQHOST-MIB::cpqHoOsCommonModulePurpose,OCTET,read-only,,deprecated,,The purpose of the module described in this entry.
.1.3.6.1.4.1.232.11.2.2,CPQHOST-MIB::cpqHoInfo,,,,,,
.1.3.6.1.4.1.232.11.2.2.1,CPQHOST-MIB::cpqHoName,OCTET,read-only,,mandatory,,The name of the host operating system (OS).
.1.3.6.1.4.1.232.11.2.2.2,CPQHOST-MIB::cpqHoVersion,OCTET,read-only,,mandatory,,The version of the host OS.
.1.3.6.1.4.1.232.11.2.2.3,CPQHOST-MIB::cpqHoDesc,OCTET,read-only,,mandatory,,A further description of the host OS.
.1.3.6.1.4.1.232.11.2.2.4,CPQHOST-MIB::cpqHoOsType,INTEGER,read-only,,mandatory,other(1):netware(2):windowsnt(3):sco-unix(4):unixware(5):os-2(6):ms-dos(7):dos-windows(8):windows95(9):windows98(10):open-vms(11):nsk(12):windowsCE(13):linux(14):windows2000(15):tru64UNIX(16):windows2003(17):windows2003-x64(18):solaris(19):windows2003-ia64(20):windows2008(21):windows2008-x64(22):windows2008-ia64(23),Host Operating system enumeration.
.1.3.6.1.4.1.232.11.2.2.5,CPQHOST-MIB::cpqHoTelnet,INTEGER,read-only,,mandatory,other(1):available(2):notavailable(3),Telnet on socket 23 is available.
.1.3.6.1.4.1.232.11.2.2.6,CPQHOST-MIB::cpqHoSystemRole,OCTET,read-write,,mandatory,,The system role. This is a settable free form text field intended to be assigned by a remote console briefly describing the system's function.
.1.3.6.1.4.1.232.11.2.2.7,CPQHOST-MIB::cpqHoSystemRoleDetail,OCTET,read-write,,mandatory,,The system detailed description. This is a settable free form text field intended to be assigned by a remote console describing the system function in detail.
.1.3.6.1.4.1.232.11.2.2.8,CPQHOST-MIB::cpqHoCrashDumpState,INTEGER,read-only,,mandatory,completememorydump(1):kernelmemorydump(2):smallmemorydump(3):none(4),Crash dump state. Value of 'Unknown (-1)' is returned when crash dump state could  not be determined.
.1.3.6.1.4.1.232.11.2.2.9,CPQHOST-MIB::cpqHoCrashDumpCondition,INTEGER,read-only,,mandatory,other(1):ok(2):degraded(3):failed(4),The condition of the Crash dump configuration.
.1.3.6.1.4.1.232.11.2.2.10,CPQHOST-MIB::cpqHoCrashDumpMonitoring,INTEGER,read-write,,optional,enabled(1):disabled(2),Enable/disable crash dump monitoring. If crash dump monitoring is enabled both crash dump TRAP's are generated and crash dump condition is updated. If crash dump monitoring is disabled, no crash dump TRAP is generated and the crash dump condition is set to  other
.1.3.6.1.4.1.232.11.2.2.11,CPQHOST-MIB::cpqHoMaxLogicalCPUSupported,INTEGER,read-only,,optional,,Maximum number of logical CPUs supported by Operating System.
.1.3.6.1.4.1.232.11.2.3,CPQHOST-MIB::cpqHoUtil,,,,,,
.1.3.6.1.4.1.232.11.2.3.1,CPQHOST-MIB::cpqHoCpuUtilTable,,not-accessible,,mandatory,,A table of CPU utilization entries.
.1.3.6.1.4.1.232.11.2.3.1.1,CPQHOST-MIB::cpqHoCpuUtilEntry,,not-accessible,cpqHoCpuUtilUnitIndex,mandatory,,A description of a CPU's utilization.
.1.3.6.1.4.1.232.11.2.3.1.1.1,CPQHOST-MIB::cpqHoCpuUtilUnitIndex,INTEGER,read-only,,mandatory,,This number uniquely specifies a processor unit. A processing unit may be a set of processing chips that are on the same board or for other reasons work together as a unit. The main processor unit (if such a concept is valid for this machine) will always have the lowest (first) index.
.1.3.6.1.4.1.232.11.2.3.1.1.2,CPQHOST-MIB::cpqHoCpuUtilMin,INTEGER,read-only,,mandatory,,The CPU utilization as a percentage of the theoretical maximum during the last minute. A value of -1 indicates that no CPU utilization information is available for this processor.
.1.3.6.1.4.1.232.11.2.3.1.1.3,CPQHOST-MIB::cpqHoCpuUtilFiveMin,INTEGER,read-only,,mandatory,,The CPU utilization as a percentage of the theoretical maximum during the last five minutes. A value of -1 indicates that no CPU utilization information is available for this processor.
.1.3.6.1.4.1.232.11.2.3.1.1.4,CPQHOST-MIB::cpqHoCpuUtilThirtyMin,INTEGER,read-only,,mandatory,,The CPU utilization as a percentage of the theoretical maximum during the last thirty minutes. A value of -1 indicates that no CPU utilization information is available for this processor.
.1.3.6.1.4.1.232.11.2.3.1.1.5,CPQHOST-MIB::cpqHoCpuUtilHour,INTEGER,read-only,,mandatory,,The CPU utilization as a percentage of the theoretical maximum during the last hour. A value of -1 indicates that no CPU utilization information is available for this processor.
.1.3.6.1.4.1.232.11.2.3.1.1.6,CPQHOST-MIB::cpqHoCpuUtilHwLocation,OCTET,read-only,,optional,,A text description of the hardware location, on complex multi SBB hardware only, for the CPU. A NULL string indicates that the hardware location could not be determined or is irrelevant.
.1.3.6.1.4.1.232.11.2.4,CPQHOST-MIB::cpqHoFileSys,,,,,,
.1.3.6.1.4.1.232.11.2.4.1,CPQHOST-MIB::cpqHoFileSysTable,,not-accessible,,mandatory,,A table of file system descriptions.
.1.3.6.1.4.1.232.11.2.4.1.1,CPQHOST-MIB::cpqHoFileSysEntry,,not-accessible,cpqHoFileSysIndex,mandatory,,A file system description.
.1.3.6.1.4.1.232.11.2.4.1.1.1,CPQHOST-MIB::cpqHoFileSysIndex,INTEGER,read-only,,mandatory,,An index that uniquely specifies this entry.
.1.3.6.1.4.1.232.11.2.4.1.1.2,CPQHOST-MIB::cpqHoFileSysDesc,OCTET,read-only,,mandatory,,A description of the file system.
.1.3.6.1.4.1.232.11.2.4.1.1.3,CPQHOST-MIB::cpqHoFileSysSpaceTotal,INTEGER,read-only,,mandatory,,The file system size in megabytes. This item will be set to -1 if the agent is unable to determine this information.
.1.3.6.1.4.1.232.11.2.4.1.1.4,CPQHOST-MIB::cpqHoFileSysSpaceUsed,INTEGER,read-only,,mandatory,,The megabytes of file system space currently in use. This item will be set to -1 if the agent is unable to determine this information.
.1.3.6.1.4.1.232.11.2.4.1.1.5,CPQHOST-MIB::cpqHoFileSysPercentSpaceUsed,INTEGER,read-only,,mandatory,,The percent of file system space currently in use. This item will be set to -1 if this information is not available.
.1.3.6.1.4.1.232.11.2.4.1.1.6,CPQHOST-MIB::cpqHoFileSysAllocUnitsTotal,INTEGER,read-only,,mandatory,,The total number of files (directory entries) that can be stored on the file system if a limit exists other than total space used. This item will be set to -1 if no such limit exists.
.1.3.6.1.4.1.232.11.2.4.1.1.7,CPQHOST-MIB::cpqHoFileSysAllocUnitsUsed,INTEGER,read-only,,mandatory,,The number of files (directory entries) on this file system. This item will be set to -1 if the agent does not determine this information.
.1.3.6.1.4.1.232.11.2.4.1.1.8,CPQHOST-MIB::cpqHoFileSysStatus,INTEGER,read-only,,mandatory,unknown(1):ok(2):degraded(3):failed(4),The Threshold Status.  This object represent the status of the Filesystem threshold.
.1.3.6.1.4.1.232.11.2.4.2,CPQHOST-MIB::cpqHoFileSysCondition,INTEGER,read-only,,mandatory,unknown(1):ok(2):degraded(3):failed(4),The overall condition of File System Threshold. This object represents the overall status of the server's  File System Threshold.
.1.3.6.1.4.1.232.11.2.5,CPQHOST-MIB::cpqHoIfPhysMap,,,,,,
.1.3.6.1.4.1.232.11.2.5.1,CPQHOST-MIB::cpqHoIfPhysMapTable,,not-accessible,,deprecated,,A table of interface to physical hardware mappings.
.1.3.6.1.4.1.232.11.2.5.1.1,CPQHOST-MIB::cpqHoIfPhysMapEntry,,not-accessible,cpqHoIfPhysMapIndex,deprecated,,A mapping of an interface table entry to physical hardware.
.1.3.6.1.4.1.232.11.2.5.1.1.1,CPQHOST-MIB::cpqHoIfPhysMapIndex,INTEGER,read-only,,deprecated,,An index that uniquely specifies this entry. This value is equal to the index of the entry in the MIB-II interface table to which this entry corresponds.
.1.3.6.1.4.1.232.11.2.5.1.1.2,CPQHOST-MIB::cpqHoIfPhysMapSlot,INTEGER,read-only,,deprecated,,The number of the slot containing the physical hardware that implements this interface. The number zero (0) indicates an embedded interface (on the system board) or an interface whose slot is unknown. Values may be unknown if the physical hardware has not been configured using the EISA Configuration Utility.
.1.3.6.1.4.1.232.11.2.5.1.1.3,CPQHOST-MIB::cpqHoIfPhysMapIoBaseAddr,INTEGER,read-only,,deprecated,,The base I/O address of the physical hardware that implements this interface.
.1.3.6.1.4.1.232.11.2.5.1.1.4,CPQHOST-MIB::cpqHoIfPhysMapIrq,INTEGER,read-only,,deprecated,,The number of the IRQ (interrupt) used for this physical hardware interface. The number zero (0) indicates that this device does not use an IRQ or this information is unavailable.
.1.3.6.1.4.1.232.11.2.5.1.1.5,CPQHOST-MIB::cpqHoIfPhysMapDma,INTEGER,read-only,,deprecated,,The number of the DMA channel used for this physical hardware interface. The number -1 indicates that this device does not use a DMA channel or this information is unavailable.
.1.3.6.1.4.1.232.11.2.5.1.1.6,CPQHOST-MIB::cpqHoIfPhysMapMemBaseAddr,INTEGER,read-only,,deprecated,,The base memory address used by this physical hardware interface. The number zero (0) indicates that this device does not use system memory or this information is unavailable.
.1.3.6.1.4.1.232.11.2.5.1.1.7,CPQHOST-MIB::cpqHoIfPhysMapPort,INTEGER,read-only,,deprecated,,The port number of the interface for multi-port NICs. A port number of -1 indicates that the port could not be determined.
.1.3.6.1.4.1.232.11.2.5.1.1.8,CPQHOST-MIB::cpqHoIfPhysMapDuplexState,INTEGER,read-only,,deprecated,other(1):half(2):full(3),This variable describes the configured duplex state of the NIC.
.1.3.6.1.4.1.232.11.2.5.1.1.9,CPQHOST-MIB::cpqHoIfPhysMapCondition,INTEGER,read-only,,deprecated,other(1):ok(2):degraded(3):failed(4),The condition of this interface.
.1.3.6.1.4.1.232.11.2.5.2,CPQHOST-MIB::cpqHoIfPhysMapOverallCondition,INTEGER,read-only,,deprecated,other(1):ok(2):degraded(3):failed(4),The overall condition of all interfaces.
.1.3.6.1.4.1.232.11.2.6,CPQHOST-MIB::cpqHoSWRunning,,,,,,
.1.3.6.1.4.1.232.11.2.6.1,CPQHOST-MIB::cpqHoSWRunningTable,,not-accessible,,mandatory,,A table of descriptions of software running on the system.
.1.3.6.1.4.1.232.11.2.6.1.1,CPQHOST-MIB::cpqHoSWRunningEntry,,not-accessible,cpqHoSWRunningIndex,mandatory,,A description of a software program running on the system.
.1.3.6.1.4.1.232.11.2.6.1.1.1,CPQHOST-MIB::cpqHoSWRunningIndex,INTEGER,read-only,,mandatory,,An index that uniquely specifies this entry.
.1.3.6.1.4.1.232.11.2.6.1.1.2,CPQHOST-MIB::cpqHoSWRunningName,OCTET,read-only,,mandatory,,The name of the software.
.1.3.6.1.4.1.232.11.2.6.1.1.3,CPQHOST-MIB::cpqHoSWRunningDesc,OCTET,read-only,,mandatory,,A description of the software.
.1.3.6.1.4.1.232.11.2.6.1.1.4,CPQHOST-MIB::cpqHoSWRunningVersion,OCTET,read-only,,mandatory,,The version of the software. This field will be a null (size 0) string if the agent cannot provide the software version.
.1.3.6.1.4.1.232.11.2.6.1.1.5,CPQHOST-MIB::cpqHoSWRunningDate,OCTET,read-only,,mandatory,,The software date. field octets contents range ===== ====== ======= ===== 1 1-2 year 0..65536 2 3 month 1..12 3 4 day 1..31 4 5 hour 0..23 5 6 minute 0..59 6 7 second 0..60 (use 60 for leap-second) This field will be set to year = 0 if the agent cannot provide the software date. The hour, minute, and second field will be set to zero (0) if they are not relevant.
.1.3.6.1.4.1.232.11.2.6.1.1.6,CPQHOST-MIB::cpqHoSWRunningMonitor,INTEGER,read-only,,mandatory,other(1):start(2):stop(3):startAndStop(4):count(5):startAndCount(6):countAndStop(7):startCountAndStop(8),The user specified monitor option for a process.
.1.3.6.1.4.1.232.11.2.6.1.1.7,CPQHOST-MIB::cpqHoSWRunningState,INTEGER,read-only,,mandatory,other(1):started(2):stopped(3),The current state of monitored process.
.1.3.6.1.4.1.232.11.2.6.1.1.8,CPQHOST-MIB::cpqHoSWRunningCount,INTEGER,read-only,,optional,,For each process name, the number of instances of the process running on the system is kept count of, in this variable.
.1.3.6.1.4.1.232.11.2.6.1.1.9,CPQHOST-MIB::cpqHoSWRunningCountMin,INTEGER,read-write,,optional,,This is the lower threshold on cpqHoSWRunningCount to be set by the user.
.1.3.6.1.4.1.232.11.2.6.1.1.10,CPQHOST-MIB::cpqHoSWRunningCountMax,INTEGER,read-write,,optional,,This is the upper threshold on cpqHoSWRunningCount to be set by the user.
.1.3.6.1.4.1.232.11.2.6.1.1.11,CPQHOST-MIB::cpqHoSWRunningEventTime,OCTET,read-only,,optional,,The system time at which the monitored event, as per cpqHoSWRunningMonitor, last occurred. field octets contents range ===== ====== ======== ===== 1 1-2 year 0..65536 2 3 month 1..12 3 4 day 1..31 4 5 hour 0..23 5 6 minute 0..59 6 7 second 0..60 (use 60 for leap-second) The hour, minute, and second field will be set to zero (0) if they are not relevant.
.1.3.6.1.4.1.232.11.2.6.1.1.12,CPQHOST-MIB::cpqHoSWRunningStatus,INTEGER,read-only,,optional,unknown(1):normal(2):warning(3):minor(4):major(5):critical(6):disabled(7),The overall alarm state of the resources managed by the software, or the software itself.
.1.3.6.1.4.1.232.11.2.6.1.1.13,CPQHOST-MIB::cpqHoSWRunningConfigStatus,INTEGER,read-only,,optional,unknown(1):starting(2):initialized(3):configured(4):operational(5),The configuration state of the software. The level of initialization the software has performed.
.1.3.6.1.4.1.232.11.2.6.1.1.14,CPQHOST-MIB::cpqHoSWRunningIdentifier,OCTET,read-only,,optional,,The unique identifier of the sofware. This identifier should be unique for all instances of the sofware running in the environment.
.1.3.6.1.4.1.232.11.2.6.1.1.15,CPQHOST-MIB::cpqHoSWRunningRedundancyMode,INTEGER,read-only,,optional,unknown(1):master(2):backup(3):slave(4),When the software is running in a high availability mode, the failover mode of this instance of the software.
.1.3.6.1.4.1.232.11.2.6.2,CPQHOST-MIB::cpqHoSwRunningTrapDesc,OCTET,read-only,,mandatory,,The error message for a process monitor event.
.1.3.6.1.4.1.232.11.2.7,CPQHOST-MIB::cpqHoSwVer,,,,,,
.1.3.6.1.4.1.232.11.2.7.1,CPQHOST-MIB::cpqHoSwVerNextIndex,INTEGER,read-only,,mandatory,,The index of the next available entry in the cpqHoSwVer table. If the maximum number of entries to the cpqHoSwVer table has been reached, this index will contain -1.
.1.3.6.1.4.1.232.11.2.7.2,CPQHOST-MIB::cpqHoSwVerTable,,not-accessible,,mandatory,,A list of software item entries.
.1.3.6.1.4.1.232.11.2.7.2.1,CPQHOST-MIB::cpqHoSwVerEntry,,not-accessible,cpqHoSwVerIndex,mandatory,,A list of software items that are on the machine.
.1.3.6.1.4.1.232.11.2.7.2.1.1,CPQHOST-MIB::cpqHoSwVerIndex,INTEGER,read-only,,mandatory,,An index that uniquely identifies an entry in the cpqHoSwVer table.
.1.3.6.1.4.1.232.11.2.7.2.1.2,CPQHOST-MIB::cpqHoSwVerStatus,INTEGER,read-only,,mandatory,other(1):loaded(2):notloaded(3),Status for the software item.
.1.3.6.1.4.1.232.11.2.7.2.1.3,CPQHOST-MIB::cpqHoSwVerType,INTEGER,read-write,,mandatory,other(1):driver(2):agent(3):sysutil(4):application(5):keyfile(6),Type of software item.
.1.3.6.1.4.1.232.11.2.7.2.1.4,CPQHOST-MIB::cpqHoSwVerName,OCTET,read-write,,mandatory,,The name of this software item.
.1.3.6.1.4.1.232.11.2.7.2.1.5,CPQHOST-MIB::cpqHoSwVerDescription,OCTET,read-write,,mandatory,,The description of this software item.
.1.3.6.1.4.1.232.11.2.7.2.1.6,CPQHOST-MIB::cpqHoSwVerDate,OCTET,read-only,,mandatory,,The date of the software item, if any. field octets contents range ===== ====== ======= ===== 1 1-2 year 0..65535 2 3 month 1..12 3 4 day 1..31 4 5 hour 0..23 5 6 minute 0..59 6 7 second 0..60 (use 60 for leap-second) The year field is set with the most significant octet first. An entry of zero (0) means that there is no date associated with this software item. Zero is the default.
.1.3.6.1.4.1.232.11.2.7.2.1.7,CPQHOST-MIB::cpqHoSwVerLocation,OCTET,read-write,,mandatory,,The location of this software item on the server.
.1.3.6.1.4.1.232.11.2.7.2.1.8,CPQHOST-MIB::cpqHoSwVerVersion,OCTET,read-only,,mandatory,,An string that specifies the version of this item.
.1.3.6.1.4.1.232.11.2.7.2.1.9,CPQHOST-MIB::cpqHoSwVerVersionBinary,OCTET,read-only,,mandatory,,An string that specifies the version of this item based on the binary version resource.
.1.3.6.1.4.1.232.11.2.7.3,CPQHOST-MIB::cpqHoSwVerAgentsVer,OCTET,read-only,,mandatory,,A string that specifies the version of the Insight Management Agents running on the system.
.1.3.6.1.4.1.232.11.2.8,CPQHOST-MIB::cpqHoGeneric,,,,,,
.1.3.6.1.4.1.232.11.2.8.1,CPQHOST-MIB::cpqHoGenericData,OCTET,read-write,,mandatory,,Data for the generic trap.
.1.3.6.1.4.1.232.11.2.8.2,CPQHOST-MIB::cpqHoCriticalSoftwareUpdateData,OCTET,read-write,,mandatory,,Data for the Critical Software Update trap.
.1.3.6.1.4.1.232.11.2.9,CPQHOST-MIB::cpqHoSwPerf,,,,,,
.1.3.6.1.4.1.232.11.2.9.1,CPQHOST-MIB::cpqHoSwPerfAppErrorDesc,OCTET,read-only,,mandatory,, This string holds error information about the last application error that occurred in the system. 
.1.3.6.1.4.1.232.11.2.10,CPQHOST-MIB::cpqHoSystemStatus,,,,,,
.1.3.6.1.4.1.232.11.2.10.1,CPQHOST-MIB::cpqHoMibStatusArray,OCTET,read-only,,mandatory,,The MIB Status Array is an array of MIB status structures. Each structure is made up of 4 octets. The first octet is the MIB presence. The second octet is MIB condition. The third octet is MIB major revision. The fourth octet is MIB minor revision. These blocks of 4 octets each are index by the mib identifier just after the compaq enterprise (eg in 1.3.6.1.232.11 mib, the index is 11). The 4 octets in the first block (block 0) are reserved for systems management and serve as an aggregate of the other mibs. Array element 0 is the status for all MIBs in the Compaq Enterprise. Array element n, where n > 0, is the status for the nth MIB in the Compaq Enterprise (.1.3.6.1.4.1.232.n). Octet Element Field ======== ======= ========= 0 0 Status of any Compaq MIBs 1 Condition of all Compaq MIBs 2 System Flags (see below) 3 Detailed type (see below) 4 1 Status of Compaq MIB 1 5 Condition of Compaq MIB 1 6 Major Revision of Compaq MIB 1 7 Minor Revision of Compaq MIB 1 8 2 Status of Compaq MIB 2 9 Condition of Compaq MIB 2 10 Major Revision of Compaq MIB 2 11 Minor Revision of Compaq MIB 2 . . . . n*4 n Status of Compaq MIB n (n*4)+1 Condition of Compaq MIB n (n*4)+2 Major Revision of Compaq MIB n (n*4)+3 Minor Revision of Compaq MIB n System Flags (octet 2) Bit Meaning ===== ========= 0 Equals 1 if the device is not a server, see detailed type below Equals 0 if the device is a server 1 This system contains enabled remote console functionality. 2 This system is configured to be an Integration Server. 3 Web Based Management is enabled. 4-7 Reserved (reserved Bits should be zero) Detailed Type (octet 3) Bits 0-4 Detailed Type, only used if bit 0 in octet 2 is 1. Bits 5-7 Reserved for expansion. note, use these last in case we need more then 32 types someday. Type Values for Bits 0-4 (maps to CIM7 types) Unknown = 0 Server = 1 (yes a duplicate of the server flag) Desktop = 2 Workstation = 3 Portable = 4 Router = 5 Cluster = 6 Printer = 7 Switch = 8 (network switch) Repeater = 9 Remote Access Device = 10 Other = 11 Management Processor = 12 (rib, RILOE, iLo) Rack = 13 Enclosure = 14 KVM Switch = 15 (IP enabled keyboard video mouse switch). UPS = 16 Power Distribution Unit = 17 Environmental Monitor = 18 (eg CMC) Power Distribution Rack = 19 (PDR) Storage Device = 20 For all other blocks, they are defined as: Status This is a collection of flags. Each bit has the following meaning when it is on (1): Bit 2-7: RESERVED: Always 0 Bit 1: MIB is from offline data 
.1.3.6.1.4.1.232.11.2.10.2,CPQHOST-MIB::cpqHoConfigChangedDate,OCTET,read-only,,mandatory,,The date/time when the agents were last loaded. field octets contents range ===== ====== ======= ===== 1 1-2 year 0..65536 2 3 month 1..12 3 4 day 1..31 4 5 hour 0..23 5 6 minute 0..59 6 7 second 0..60 (use 60 for leap-second) This field will be set to year = 0 if the agent cannot provide the date/time. The year field is set with the most significant octet first.
.1.3.6.1.4.1.232.11.2.10.3,CPQHOST-MIB::cpqHoGUID,OCTET,read-write,,mandatory,,The globally unique identifier of this physical server. If the OS cannot determine a unique ID, it will default the variable to contain all 0's. The management station can then perform a SET to this variable to provide the unique ID. When the system is cellular, it will have its partition number appended at the end.
.1.3.6.1.4.1.232.11.2.10.4,CPQHOST-MIB::cpqHoCodeServer,INTEGER,read-only,,mandatory,,This item indicates how many code server shares are currently configured on the system. If the value of this attribute is 0, this server has not been configured with code server shares.
.1.3.6.1.4.1.232.11.2.10.5,CPQHOST-MIB::cpqHoWebMgmtPort,INTEGER,read-only,,mandatory,,This item indicates the port used by the Insight Web Agent. If the port cannot be determined or the Web Management agent is not enabled, this value will be -1.
.1.3.6.1.4.1.232.11.2.10.6,CPQHOST-MIB::cpqHoGUIDCanonical,OCTET,read-write,,mandatory,,The globally unique identifier in canonical format of this  physical server. If the OS cannot determine a unique ID, it will  default the variable to blank.
.1.3.6.1.4.1.232.11.2.11,CPQHOST-MIB::cpqHoTrapInfo,,,,,,
.1.3.6.1.4.1.232.11.2.11.1,CPQHOST-MIB::cpqHoTrapFlags,INTEGER,read-only,,mandatory,,The Trap Flags. This is a collection of flags used during trap delivery. Each bit has the following meaning: Bit 5-31: RESERVED: Always 0. Bit 2-4: Trap Condition 0 = Not used (for backward compatibility) 1 = Condition unknown or N/A 2 = Condition ok 3 = Condition degraded 4 = Condition failed 5-7 = reserved Bit 1: Client IP address type 0 = static entry 1 = DHCP entry Bit 0: Agent Type 0 = Server 1 = Client NOTE: bit 31 is the most significant bit, bit 0 is the least significant.
.1.3.6.1.4.1.232.11.2.12,CPQHOST-MIB::cpqHoClients,,,,,,
.1.3.6.1.4.1.232.11.2.12.1,CPQHOST-MIB::cpqHoClientLastModified,OCTET,read-only,,mandatory,,The date/time of the last modification to the client table. field octets contents range ===== ====== ======= ===== 1 1-2 year 0..65536 2 3 month 1..12 3 4 day 1..31 4 5 hour 0..23 5 6 minute 0..59 6 7 second 0..60 (use 60 for leap-second) This field will be set to all 0's if there are no entries to the client table. The year field will be set to 0xFFFF if the agent does not support the client table. The year field is set with the most significant octet first.
.1.3.6.1.4.1.232.11.2.12.2,CPQHOST-MIB::cpqHoClientDelete,OCTET,read-write,,mandatory,,Setting this variable to the name of a client in the client table will cause that row in the table to be deleted. Any other set will fail. Note that the indices of the table will (most likely) be renumbered following a deletion.
.1.3.6.1.4.1.232.11.2.12.3,CPQHOST-MIB::cpqHoClientTable,,not-accessible,,mandatory,,A table of client descriptions.
.1.3.6.1.4.1.232.11.2.12.3.1,CPQHOST-MIB::cpqHoClientEntry,,not-accessible,cpqHoClientIndex,mandatory,,A client description.
.1.3.6.1.4.1.232.11.2.12.3.1.1,CPQHOST-MIB::cpqHoClientIndex,INTEGER,read-only,,mandatory,,An index that uniquely specifies this entry.
.1.3.6.1.4.1.232.11.2.12.3.1.2,CPQHOST-MIB::cpqHoClientName,OCTET,read-only,,mandatory,,The Win95 machine name of this client.
.1.3.6.1.4.1.232.11.2.12.3.1.3,CPQHOST-MIB::cpqHoClientIpxAddress,OCTET,read-only,,mandatory,,The IPX address for this client, all octets should be set to 0xff if this machine does not support IPX. The format is NetAddr:NodeNumber and sent in MSB order: 1111111111 01234567:890123456789
.1.3.6.1.4.1.232.11.2.12.3.1.4,CPQHOST-MIB::cpqHoClientIpAddress,IpAddress,read-only,,mandatory,,The IP address for this client, all octets should be set to 0xff if this machine does not support IP. The order will be in network byte order (ie MSB first.)
.1.3.6.1.4.1.232.11.2.12.3.1.5,CPQHOST-MIB::cpqHoClientCommunity,OCTET,read-only,,mandatory,,A community name that can be used to query the client with SNMP. This community name should have, but is not required to have, the greatest possible access to client information.
.1.3.6.1.4.1.232.11.2.12.3.1.6,CPQHOST-MIB::cpqHoClientID,OCTET,read-only,,mandatory,,The unique identifier of this client.
.1.3.6.1.4.1.232.11.2.13,CPQHOST-MIB::cpqHoMemory,,,,,,
.1.3.6.1.4.1.232.11.2.13.1,CPQHOST-MIB::cpqHoPhysicalMemorySize,INTEGER,read-only,,mandatory,,Total amount of physical memory as seen by the OS (in megabytes). A -1 will be returned if this value could not be determined.
.1.3.6.1.4.1.232.11.2.13.2,CPQHOST-MIB::cpqHoPhysicalMemoryFree,INTEGER,read-only,,mandatory,,The amount of free physical memory (in megabytes). A -1 will be returned if this value could not be determined.
.1.3.6.1.4.1.232.11.2.13.3,CPQHOST-MIB::cpqHoPagingMemorySize,INTEGER,read-only,,mandatory,,Total virtual memory available from the OS (in megabytes). A -1 will be returned if this value could not be determined.
.1.3.6.1.4.1.232.11.2.13.4,CPQHOST-MIB::cpqHoPagingMemoryFree,INTEGER,read-only,,mandatory,,Available paging memory (in megabytes). A -1 will be returned if this value could not be determined.
.1.3.6.1.4.1.232.11.2.13.5,CPQHOST-MIB::cpqHoBootPagingFileSize,OCTET,read-only,,mandatory,,The paging file size of the boot volume in the format xxxMB or  xxxGB, where xxx is the paging file size in that unit shown right  after it. NULL value will be returned if this value could not be determined.
.1.3.6.1.4.1.232.11.2.13.6,CPQHOST-MIB::cpqHoBootPagingFileMinimumSize,OCTET,read-only,,mandatory,,Minimum paging file size of the boot volume required to save the  memory dump in the event of a system crash. The format is xxxMB or  xxxGB, where xxx is the minimum paging file size in that unit shown  right after it.
.1.3.6.1.4.1.232.11.2.13.7,CPQHOST-MIB::cpqHoBootPagingFileVolumeFreeSpace,OCTET,read-only,,optional,,Free space of the boot volume required to save the memory dump in the  event of a system crash. The format is xxxMB or xxxGB, where xxx is the minimum paging file size in that unit shown right after it.
.1.3.6.1.4.1.232.11.2.14,CPQHOST-MIB::cpqHoFwVer,,,,,,
.1.3.6.1.4.1.232.11.2.14.1,CPQHOST-MIB::cpqHoFwVerTable,,not-accessible,,mandatory,,A list of firmware item entries.
.1.3.6.1.4.1.232.11.2.14.1.1,CPQHOST-MIB::cpqHoFwVerEntry,,not-accessible,cpqHoFwVerIndex,mandatory,,A list of firmware items that are on the machine.
.1.3.6.1.4.1.232.11.2.14.1.1.1,CPQHOST-MIB::cpqHoFwVerIndex,INTEGER,read-only,,mandatory,,Firmware Version Index. The firmware version index uniquely identifies an entry in the cpqHoFwVer table.
.1.3.6.1.4.1.232.11.2.14.1.1.2,CPQHOST-MIB::cpqHoFwVerCategory,INTEGER,read-only,,mandatory,other(1):storage(2):nic(3):rib(4):system(5),Firmware Version Category.
.1.3.6.1.4.1.232.11.2.14.1.1.3,CPQHOST-MIB::cpqHoFwVerDeviceType,INTEGER,read-only,,mandatory,other(1):internalArrayController(2):fibreArrayController(3):scsiController(4):fibreChannelTapeController(5):modularDataRouter(6):ideCdRomDrive(7):ideDiskDrive(8):scsiCdRom-ScsiAttached(9):scsiDiskDrive-ScsiAttached(10):scsiTapeDrive-ScsiAttached(11):scsiTapeLibrary-ScsiAttached(12):scsiDiskDrive-ArrayAttached(13):scsiTapeDrive-ArrayAttached(14):scsiTapeLibrary-ArrayAttached(15):scsiDiskDrive-FibreAttached(16):scsiTapeDrive-FibreAttached(17):scsiTapeLibrary-FibreAttached(18):scsiEnclosureBackplaneRom-ScsiAttached(19):scsiEnclosureBackplaneRom-ArrayAttached(20):scsiEnclosureBackplaneRom-FibreAttached(21):scsiEnclosureBackplaneRom-ra4x00(22):systemRom(23):networkInterfaceController(24):remoteInsightBoard(25),Firmware Version Device Type.
.1.3.6.1.4.1.232.11.2.14.1.1.4,CPQHOST-MIB::cpqHoFwVerDisplayName,OCTET,read-only,,mandatory,,Firmware Version Device Display Name. This is the display name of the device containing the firmware.
.1.3.6.1.4.1.232.11.2.14.1.1.5,CPQHOST-MIB::cpqHoFwVerVersion,OCTET,read-only,,mandatory,,Firmware Version. This is the version of the device firmware.
.1.3.6.1.4.1.232.11.2.14.1.1.6,CPQHOST-MIB::cpqHoFwVerLocation,OCTET,read-only,,mandatory,,Firmware Version Device Location. This is a printable string that specifies the location of the device that contains the firmware.
.1.3.6.1.4.1.232.11.2.14.1.1.7,CPQHOST-MIB::cpqHoFwVerXmlString,OCTET,read-only,,mandatory,,Firmware Version Xml String. This is an XML string that specifies the location of the device that contains the firmware. This will be NULL string (size 0) if this information could not be provided.
.1.3.6.1.4.1.232.11.2.14.1.1.8,CPQHOST-MIB::cpqHoFwVerKeyString,OCTET,read-only,,mandatory,,Firmware Version Key String. This field is differentiate devices of the same type.
.1.3.6.1.4.1.232.11.2.14.1.1.9,CPQHOST-MIB::cpqHoFwVerUpdateMethod,INTEGER,read-only,,mandatory,other(1):noUpdate(2):softwareflash(3):replacePhysicalRom(4),Firmware Version update method.
.1.3.6.1.4.1.232.11.2.15,CPQHOST-MIB::cpqHoHWInfo,,,,,,
.1.3.6.1.4.1.232.11.2.15.1,CPQHOST-MIB::cpqHoHWInfoPlatform,INTEGER,read-only,,optional,unknown(1):cellular(2):foundation(3):virtualMachine(4):serverBlade(5),Hardware platform type. This object represents the platform type of the server's host system represented by this MIB.
.1.3.6.1.4.1.232.11.2.16,CPQHOST-MIB::cpqPwrThreshold,,,,,,
.1.3.6.1.4.1.232.11.2.16.1,CPQHOST-MIB::cpqPwrWarnType,OCTET,read-write,,mandatory,,Type of power reading on which the warning is based.
.1.3.6.1.4.1.232.11.2.16.2,CPQHOST-MIB::cpqPwrWarnThreshold,INTEGER,read-write,,mandatory,,The threshold the power usage must exceed (in Watts).
.1.3.6.1.4.1.232.11.2.16.3,CPQHOST-MIB::cpqPwrWarnDuration,INTEGER,read-write,,mandatory,,Duration that power usage must be exceeded before warning (in minutes).
.1.3.6.1.4.1.232.11.2.16.4,CPQHOST-MIB::cpqSerialNum,OCTET,read-write,,mandatory,,Serial number of the server.
.1.3.6.1.4.1.232.11.2.16.5,CPQHOST-MIB::cpqServerUUID,OCTET,read-write,,mandatory,,Server UUID
.1.3.6.1.4.1.11898,ORiNOCO-MIB::agere,,,,,,
.1.3.6.1.4.1.11898.2,ORiNOCO-MIB::orinoco,,,,,,MIB Definition used in the ORiNOCO Wireless Product Line: iso(1).org(3).dod(6).internet(1).private(4).enterprises(1). agere(11898).orinoco(2)
.1.3.6.1.4.1.11898.2.1,ORiNOCO-MIB::orinocoObjects,,,,,,
.1.3.6.1.4.1.11898.2.1.1,ORiNOCO-MIB::orinocoSys,,,,,,
.1.3.6.1.4.1.11898.2.1.1.1,ORiNOCO-MIB::orinocoSysInvMgmt,,,,,,
.1.3.6.1.4.1.11898.2.1.1.1.1,ORiNOCO-MIB::oriSystemInvMgmtComponentTable,,not-accessible,,current,,This table contains the inventory management objects for the 
.1.3.6.1.4.1.11898.2.1.1.1.1.1,ORiNOCO-MIB::oriSystemInvMgmtComponentTableEntry,,not-accessible,oriSystemInvMgmtTableComponentIndex,current,,This object represents an entry in the system inventory  management component table.
.1.3.6.1.4.1.11898.2.1.1.1.1.1.1,ORiNOCO-MIB::oriSystemInvMgmtTableComponentIndex,Integer32,read-only,,current,,This object represents the table index.
.1.3.6.1.4.1.11898.2.1.1.1.1.1.2,ORiNOCO-MIB::oriSystemInvMgmtTableComponentSerialNumber,OCTET,read-only,,current,,This object identifies the system component serial number.
.1.3.6.1.4.1.11898.2.1.1.1.1.1.3,ORiNOCO-MIB::oriSystemInvMgmtTableComponentName,OCTET,read-only,,current,,This object identifies the system component name.
.1.3.6.1.4.1.11898.2.1.1.1.1.1.4,ORiNOCO-MIB::oriSystemInvMgmtTableComponentId,Integer32,read-only,,current,,This object identifies the system component identification.
.1.3.6.1.4.1.11898.2.1.1.1.1.1.5,ORiNOCO-MIB::oriSystemInvMgmtTableComponentVariant,Integer32,read-only,,current,,This object identifies the system component variant number.
.1.3.6.1.4.1.11898.2.1.1.1.1.1.6,ORiNOCO-MIB::oriSystemInvMgmtTableComponentReleaseVersion,Integer32,read-only,,current,,This object identifies the system component release version 
.1.3.6.1.4.1.11898.2.1.1.1.1.1.7,ORiNOCO-MIB::oriSystemInvMgmtTableComponentMajorVersion,Integer32,read-only,,current,,This object identifies the system component major version 
.1.3.6.1.4.1.11898.2.1.1.1.1.1.8,ORiNOCO-MIB::oriSystemInvMgmtTableComponentMinorVersion,Integer32,read-only,,current,,This object identifies the system component minor version 
.1.3.6.1.4.1.11898.2.1.1.1.2,ORiNOCO-MIB::oriSystemInvMgmtTableComponentIfTable,,not-accessible,,current,,This table contains the inventory management objects for the
.1.3.6.1.4.1.11898.2.1.1.1.2.1,ORiNOCO-MIB::oriSystemInvMgmtTableComponentIfTableEntry,,not-accessible,oriSystemInvMgmtTableComponentIndex:oriSystemInvMgmtInterfaceTableIndex,current,,This object represents an entry in the system component 
.1.3.6.1.4.1.11898.2.1.1.1.2.1.1,ORiNOCO-MIB::oriSystemInvMgmtInterfaceTableIndex,Integer32,read-only,,current,,This object identifies the interface table index.
.1.3.6.1.4.1.11898.2.1.1.1.2.1.2,ORiNOCO-MIB::oriSystemInvMgmtInterfaceId,Integer32,read-only,,current,,This object identifies the system component interface 
.1.3.6.1.4.1.11898.2.1.1.1.2.1.3,ORiNOCO-MIB::oriSystemInvMgmtInterfaceRole,INTEGER,read-only,,current,actor(1):supplier(2),This object identifies the system component interface role.
.1.3.6.1.4.1.11898.2.1.1.1.2.1.4,ORiNOCO-MIB::oriSystemInvMgmtInterfaceVariant,Integer32,read-only,,current,,This object identifies the system component's interface
.1.3.6.1.4.1.11898.2.1.1.1.2.1.5,ORiNOCO-MIB::oriSystemInvMgmtInterfaceBottomNumber,Integer32,read-only,,current,,This object identifies the system component's interface
.1.3.6.1.4.1.11898.2.1.1.1.2.1.6,ORiNOCO-MIB::oriSystemInvMgmtInterfaceTopNumber,Integer32,read-only,,current,,This object identifies the system component's interface
.1.3.6.1.4.1.11898.2.1.1.2,ORiNOCO-MIB::oriSystemAdminState,INTEGER,read-write,,current,normal(1):maintenance(2),This object identifies the device's state. When the device is 
.1.3.6.1.4.1.11898.2.1.1.3,ORiNOCO-MIB::oriSystemAdminStateTimer,Integer32,read-write,,current,,This object is a timer used when changing the device's state 
.1.3.6.1.4.1.11898.2.1.1.4,ORiNOCO-MIB::oriSystemReboot,Integer32,read-write,,current,,This object is used to reboot the device. The value assigned to this object is the number of seconds until the next reboot.
.1.3.6.1.4.1.11898.2.1.1.5,ORiNOCO-MIB::oriSystemContactEmail,OCTET,read-write,,current,,This object is used to identify the email address of the  contact person for this managed device.
.1.3.6.1.4.1.11898.2.1.1.6,ORiNOCO-MIB::oriSystemContactPhoneNumber,OCTET,read-write,,current,,This object is used to identify the phone number of the contact person for this managed device.
.1.3.6.1.4.1.11898.2.1.1.7,ORiNOCO-MIB::oriSystemFlashUpdate,Integer32,read-write,,current,,When this variable is set, all the objects that are
.1.3.6.1.4.1.11898.2.1.1.8,ORiNOCO-MIB::oriSystemFlashBackupInterval,Integer32,read-write,,current,,This object is used for the backup time interval for flash  memory to be udpated.
.1.3.6.1.4.1.11898.2.1.1.9,ORiNOCO-MIB::oriSystemEmergencyResetToDefault,Integer32,read-write,,current,,This object is used to reset the device to factory default values. When this variable is set to 1, all the objects shall be set to factory default values. The default value for this object should be 0.
.1.3.6.1.4.1.11898.2.1.1.10,ORiNOCO-MIB::oriSystemMode,INTEGER,read-write,,current,bridge(1):gateway(2),This object represents the mode the system is configured to  operate in, either bridge or gateway/router mode.
.1.3.6.1.4.1.11898.2.1.1.11,ORiNOCO-MIB::oriSystemEventLogTable,,not-accessible,,current,,This table contains system event log information that can include
.1.3.6.1.4.1.11898.2.1.1.11.1,ORiNOCO-MIB::oriSystemEventLogTableEntry,,not-accessible,oriSystemEventLogMessage,current,,This object represents an entry in the system event log  table.
.1.3.6.1.4.1.11898.2.1.1.11.1.1,ORiNOCO-MIB::oriSystemEventLogMessage,OCTET,read-only,,current,,This object is used to store system event log information. This is also used as the index to the table.
.1.3.6.1.4.1.11898.2.1.1.12,ORiNOCO-MIB::oriSystemEventLogTableReset,Integer32,read-write,,current,,This object is used to reset/clear the event log table. When this object is the set all entries in the event log table are deleted/cleared.
.1.3.6.1.4.1.11898.2.1.1.13,ORiNOCO-MIB::oriSystemEventLogMask,Integer32,read-write,,current,,This object is used to control what events will be logged by
.1.3.6.1.4.1.11898.2.1.1.14,ORiNOCO-MIB::oriSystemAccessUserName,OCTET,read-write,,current,,This object represents the system access user name for the supported management interfaces (Telnet and HTTP).
.1.3.6.1.4.1.11898.2.1.1.15,ORiNOCO-MIB::oriSystemAccessPassword,OCTET,read-write,,current,,This object represents the system access password for the supported management interfaces (Telnet and HTTP). This object  should be treated as write-only and returned as asterisks.
.1.3.6.1.4.1.11898.2.1.1.16,ORiNOCO-MIB::oriSystemAccessLoginTimeout,Integer32,read-write,,current,,This object represents the login timeout in seconds. The default value should be 60 seconds (1 minute).
.1.3.6.1.4.1.11898.2.1.1.17,ORiNOCO-MIB::oriSystemAccessIdleTimeout,Integer32,read-write,,current,,This object represents the inactivity or idle timeout in seconds. The default value should be 900 seconds (15 minutes).
.1.3.6.1.4.1.11898.2.1.1.18,ORiNOCO-MIB::oriSystemEventLogNumberOfMessages,Integer32,read-only,,current,,This object represnets the number of messages currently stored  in the event log table.
.1.3.6.1.4.1.11898.2.1.1.19,ORiNOCO-MIB::orinocoSysFeature,,,,,,
.1.3.6.1.4.1.11898.2.1.1.19.1,ORiNOCO-MIB::oriSystemFeatureTable,,not-accessible,,current,,This table contains a list of features that the current image  supports and indicates if this features is licensed (enabled) or  not (disabled). Each row represents a supported and/or licensed  feature. Supported indicates if the current image supports the  image while Licensed indicates that a license is available to use 
.1.3.6.1.4.1.11898.2.1.1.19.1.1,ORiNOCO-MIB::oriSystemFeatureTableEntry,,not-accessible,oriSystemFeatureTableCode,current,,This object represents an entry in the system feature license 
.1.3.6.1.4.1.11898.2.1.1.19.1.1.1,ORiNOCO-MIB::oriSystemFeatureTableCode,INTEGER,read-only,,current,bandwidthWiFi(1):bandwidthWDS(2):bandwidthWORP(3):bandwidthTurboCell(4):bandwidthADSL(5):bandwidthCable(6):bandwidthPhone(7):maxStationsWiFi(8):maxLinksWDS(9):maxStationsWORP(10):maxStationsTurboCell(11):maxPPPoESessions(12):managementHTTP(13):remoteLinkTest(14):routingStatic(15):routingRIP(16):routingOSPF(17):spanningTreeProtocol(18):linkIntegrity(19):dHCPServer(20):dHCPRelayAgent(21):proxyARP(22):filteringStatic(23):authRADIUS(24):acctRADIUS(25):throttlingRADIUS(26):filterIP(27):ieee802dot1x(28):nse(29):iAPP(30):dNSRedirect(31):aOLNATGateway(32):hereUare(33):spectralink(34):vLANTagging(35),This object identifies the code for the licensed feature and 
.1.3.6.1.4.1.11898.2.1.1.19.1.1.2,ORiNOCO-MIB::oriSystemFeatureTableSupported,Integer32,read-only,,current,,This object represents the maximum value for the feature as 
.1.3.6.1.4.1.11898.2.1.1.19.1.1.3,ORiNOCO-MIB::oriSystemFeatureTableLicensed,Integer32,read-only,,current,,This object represents the maximum value for the feature as 
.1.3.6.1.4.1.11898.2.1.1.19.1.1.4,ORiNOCO-MIB::oriSystemFeatureTableDescription,OCTET,read-only,,current,,This object represents a textual description for the licensed 
.1.3.6.1.4.1.11898.2.1.1.20,ORiNOCO-MIB::oriSystemAccessMaxSessions,Integer32,read-only,,current,,This object controls the maximum number of simultaneous telnet,  http, and serial managmenent sessions.
.1.3.6.1.4.1.11898.2.1.1.21,ORiNOCO-MIB::orinocoSyslog,,,,,,
.1.3.6.1.4.1.11898.2.1.1.21.1,ORiNOCO-MIB::oriSyslogStatus,INTEGER,read-write,,current,enable(1):disable(2),This object is used to enable or disable the syslog feature.
.1.3.6.1.4.1.11898.2.1.1.21.2,ORiNOCO-MIB::oriSyslogPort,Integer32,read-only,,current,,This object represents the UDP destination port number for syslog 
.1.3.6.1.4.1.11898.2.1.1.21.3,ORiNOCO-MIB::oriSyslogPriority,Integer32,read-write,,current,,This object represents the lowest message priority to be logged by
.1.3.6.1.4.1.11898.2.1.1.21.4,ORiNOCO-MIB::oriSyslogHeartbeat,INTEGER,read-write,,current,enable(1):disable(2),This object is used to enable or disable logging of heartbeat messages
.1.3.6.1.4.1.11898.2.1.1.21.5,ORiNOCO-MIB::oriSyslogHeartbeatInterval,Integer32,read-write,,current,,This object is used to configure interval (in seconds) for which
.1.3.6.1.4.1.11898.2.1.1.21.6,ORiNOCO-MIB::oriSyslogHostTable,,not-accessible,,current,,This table is used to configure syslog hosts.
.1.3.6.1.4.1.11898.2.1.1.21.6.1,ORiNOCO-MIB::oriSyslogHostTableEntry,,not-accessible,oriSyslogHostTableIndex,current,,This object represents an entry for the syslog host table.
.1.3.6.1.4.1.11898.2.1.1.21.6.1.1,ORiNOCO-MIB::oriSyslogHostTableIndex,Integer32,read-only,,current,,This object represents an index in the syslog host table.
.1.3.6.1.4.1.11898.2.1.1.21.6.1.2,ORiNOCO-MIB::oriSyslogHostIPAddress,IpAddress,read-write,,current,,This object represents the IP address of the host running the
.1.3.6.1.4.1.11898.2.1.1.21.6.1.3,ORiNOCO-MIB::oriSyslogHostComment,OCTET,read-write,,current,,This object represents an optional comment for the syslog host, for
.1.3.6.1.4.1.11898.2.1.1.21.6.1.4,ORiNOCO-MIB::oriSyslogHostTableEntryStatus,INTEGER,read-write,,current,enable(1):disable(2):delete(3):create(4),This object is used to enable, disable, delete, or create an
.1.3.6.1.4.1.11898.2.1.2,ORiNOCO-MIB::orinocoIf,,,,,,
.1.3.6.1.4.1.11898.2.1.2.1,ORiNOCO-MIB::orinocoWirelessIf,,,,,,
.1.3.6.1.4.1.11898.2.1.2.1.1,ORiNOCO-MIB::oriWirelessIfPropertiesTable,,not-accessible,,current,,This table contains information on the properties and 
.1.3.6.1.4.1.11898.2.1.2.1.1.1,ORiNOCO-MIB::oriWirelessIfPropertiesEntry,,not-accessible,oriWirelessIfPropertiesIndex,current,,This object represents the entry in the wireless interface 
.1.3.6.1.4.1.11898.2.1.2.1.1.1.1,ORiNOCO-MIB::oriWirelessIfPropertiesIndex,Integer32,read-only,,current,,This object represents a unique value for each interface in the
.1.3.6.1.4.1.11898.2.1.2.1.1.1.2,ORiNOCO-MIB::oriWirelessIfNetworkName,OCTET,read-write,,current,,This object represents the network name (SSID) for this wireless 
.1.3.6.1.4.1.11898.2.1.2.1.1.1.3,ORiNOCO-MIB::oriWirelessIfMediumReservation,Integer32,read-write,,current,,This object represents the medium reservation value. The range
.1.3.6.1.4.1.11898.2.1.2.1.1.1.4,ORiNOCO-MIB::oriWirelessIfInterferenceRobustness,INTEGER,read-write,,current,enable(1):disable(2),This object enables or disables the interference robustness 
.1.3.6.1.4.1.11898.2.1.2.1.1.1.5,ORiNOCO-MIB::oriWirelessIfDTIMPeriod,Integer32,read-write,,current,,This object represents the delivery traffic indication map 
.1.3.6.1.4.1.11898.2.1.2.1.1.1.6,ORiNOCO-MIB::oriWirelessIfChannel,Integer32,read-write,,current,,This object represents the radio frequency channel for this 
.1.3.6.1.4.1.11898.2.1.2.1.1.1.7,ORiNOCO-MIB::oriWirelessIfDistancebetweenAPs,INTEGER,read-write,,current,large(1):medium(2):small(3):minicell(4):microcell(5),This object identifies the distance between access points.
.1.3.6.1.4.1.11898.2.1.2.1.1.1.8,ORiNOCO-MIB::oriWirelessIfMulticastRate,INTEGER,read-write,,current,oneMegabitPerSecond(1):twoMegabitsPerSecond(2):fivedotfiveMegabitsPerSecond(3):elevenMegabitsPerSecond(4),This object identifies multicast rate of the wireless interface. 
.1.3.6.1.4.1.11898.2.1.2.1.1.1.9,ORiNOCO-MIB::oriWirelessIfClosedSystem,INTEGER,read-write,,current,enable(1):disable(2),This object is used as a flag which identifies whether the 
.1.3.6.1.4.1.11898.2.1.2.1.1.1.10,ORiNOCO-MIB::oriWirelessIfAllowedSupportedDataRates,OCTET,read-only,,current,,This object reflects the transmit rates supported by the 
.1.3.6.1.4.1.11898.2.1.2.1.1.1.11,ORiNOCO-MIB::oriWirelessIfRegulatoryDomainList,OCTET,read-only,,current,,This object specifies to which regulatory domain the wireless
.1.3.6.1.4.1.11898.2.1.2.1.1.1.12,ORiNOCO-MIB::oriWirelessIfAllowedChannels,OCTET,read-only,,current,,This object reflects the radio frequency channels that the 
.1.3.6.1.4.1.11898.2.1.2.1.1.1.13,ORiNOCO-MIB::oriWirelessIfMACAddress,OCTET,read-only,,deprecated,,This object represents the MAC address of the wireless interface
.1.3.6.1.4.1.11898.2.1.2.1.1.1.14,ORiNOCO-MIB::oriWirelessIfLoadBalancing,INTEGER,read-write,,current,enable(1):disable(2),This object is used to configure the load balancing feature
.1.3.6.1.4.1.11898.2.1.2.1.1.1.15,ORiNOCO-MIB::oriWirelessIfMediumDensityDistribution,INTEGER,read-write,,current,enable(1):disable(2),This object is used to configure the medium density distribution
.1.3.6.1.4.1.11898.2.1.2.1.1.1.16,ORiNOCO-MIB::oriWirelessIfTxRate,Integer32,read-write,,current,,This object is used to configure the transmit rate for unicast 
.1.3.6.1.4.1.11898.2.1.2.1.1.1.17,ORiNOCO-MIB::oriWirelessIfAutoChannelSelectStatus,INTEGER,read-write,,current,enable(1):disable(2),This object is used to configure the automatic frequency channel
.1.3.6.1.4.1.11898.2.1.2.1.1.1.18,ORiNOCO-MIB::oriWirelessIfBandwidthLimitIn,Gauge32,read-write,,current,,This object represents the input bandwidth limit of the interface 
.1.3.6.1.4.1.11898.2.1.2.1.1.1.19,ORiNOCO-MIB::oriWirelessIfBandwidthLimitOut,Gauge32,read-write,,current,,This object represents the output bandwidth limit of the interface  in increments of 64 kbps. The value can be limited by a previous  written value, the negotiation process during registration or by a  license. A written value will only take effect after reboot.
.1.3.6.1.4.1.11898.2.1.2.1.1.1.20,ORiNOCO-MIB::oriWirelessIfTurboModeStatus,INTEGER,read-write,,current,enable(1):disable(2),This object is used to enable or disable turbo mode support. Turbo mode is only supported for 802.11a PHY (OFDM - 5 GHz) wireless NICs. When Turbo mode is enabled the data rates will be doubled (refer to oriWirelessIfAllowedSupportedDataRates object description).
.1.3.6.1.4.1.11898.2.1.2.1.2,ORiNOCO-MIB::oriWirelessIfSecurityTable,,not-accessible,,current,,This table contains information on the security management objects 
.1.3.6.1.4.1.11898.2.1.2.1.2.1,ORiNOCO-MIB::oriWirelessIfSecurityEntry,,not-accessible,oriWirelessIfSecurityIndex,current,,This object represents an entry in the wireless interface 
.1.3.6.1.4.1.11898.2.1.2.1.2.1.1,ORiNOCO-MIB::oriWirelessIfSecurityIndex,Integer32,read-only,,current,,This object represents a unique value for each interface in the
.1.3.6.1.4.1.11898.2.1.2.1.2.1.2,ORiNOCO-MIB::oriWirelessIfEncryptionOptions,INTEGER,read-only,,current,none(1):wep(2):rcFour128(3),This object reflects the wireless interface's security 
.1.3.6.1.4.1.11898.2.1.2.1.2.1.3,ORiNOCO-MIB::oriWirelessIfEncryptionStatus,INTEGER,read-write,,current,enable(1):disable(2),This object is used to enable or disable WEP encryption for the 
.1.3.6.1.4.1.11898.2.1.2.1.2.1.4,ORiNOCO-MIB::oriWirelessIfEncryptionKey1,OCTET,read-write,,current,,This object represents Encryption Key 1. This object should be
.1.3.6.1.4.1.11898.2.1.2.1.2.1.5,ORiNOCO-MIB::oriWirelessIfEncryptionKey2,OCTET,read-write,,current,,This object represents Encryption Key 2. This object should be
.1.3.6.1.4.1.11898.2.1.2.1.2.1.6,ORiNOCO-MIB::oriWirelessIfEncryptionKey3,OCTET,read-write,,current,,This object represents Encryption Key 3. This object should be
.1.3.6.1.4.1.11898.2.1.2.1.2.1.7,ORiNOCO-MIB::oriWirelessIfEncryptionKey4,OCTET,read-write,,current,,This object represents Encryption Key 4. This object should be
.1.3.6.1.4.1.11898.2.1.2.1.2.1.8,ORiNOCO-MIB::oriWirelessIfEncryptionTxKey,Integer32,read-write,,current,,This object indicates which encryption key is used to encrypt
.1.3.6.1.4.1.11898.2.1.2.1.2.1.9,ORiNOCO-MIB::oriWirelessIfDenyNonEncryptedData,INTEGER,read-write,,current,enable(1):disable(2),This parameter indicates if this interface will accept or deny 
.1.3.6.1.4.1.11898.2.1.2.1.2.1.10,ORiNOCO-MIB::oriWirelessIfProfileCode,Integer32,read-only,,current,,The object represents the profile code of the wirelesss interface. This information is comprised of a vendor indication and a  capability indication (example: bronze or gold card).
.1.3.6.1.4.1.11898.2.1.2.2,ORiNOCO-MIB::orinocoEthernetIf,,,,,,
.1.3.6.1.4.1.11898.2.1.2.2.1,ORiNOCO-MIB::oriEthernetIfConfigTable,,not-accessible,,current,,This table is used to configure the ethernet interface(s) for the  device.
.1.3.6.1.4.1.11898.2.1.2.2.1.1,ORiNOCO-MIB::oriEthernetIfConfigTableEntry,,not-accessible,oriEthernetIfConfigTableIndex,current,,This object represents an entry in the ethernet interface  configuration table.
.1.3.6.1.4.1.11898.2.1.2.2.1.1.1,ORiNOCO-MIB::oriEthernetIfConfigTableIndex,Integer32,read-only,,current,,This object represents the index of the ethernet configuraiton table.
.1.3.6.1.4.1.11898.2.1.2.2.1.1.2,ORiNOCO-MIB::oriEthernetIfConfigSettings,INTEGER,read-write,,current,tenMegabitPerSecHalfDuplex(1):tenMegabitPerSecFullDuplex(2):tenMegabitPerSecAutoDuplex(3):onehundredMegabitPerSecHalfDuplex(4):onehundredMegabitPerSecFullDuplex(5):autoSpeedHalfDuplex(6):autoSpeedAutoDuplex(7),This object is used to configure the Ethernet interface's speed.
.1.3.6.1.4.1.11898.2.1.2.2.1.1.3,ORiNOCO-MIB::oriEthernetIfConfigBandwidthLimitIn,Gauge32,read-write,,current,,This object represents the input bandwidth limit of the interface  in increments of 64 kbps. The value can be limited by a previous  written value, the negotiation process during registration, or by  a license. A written value will only take effect after reboot.
.1.3.6.1.4.1.11898.2.1.2.2.1.1.4,ORiNOCO-MIB::oriEthernetIfConfigBandwidthLimitOut,Gauge32,read-write,,current,,This object represents the output bandwidth limit of the interface in increments of 64 kbps. The value can be limited by a previous  written value, the negotiation process during registration, or by a license. A written value will only take effect after reboot.
.1.3.6.1.4.1.11898.2.1.2.3,ORiNOCO-MIB::orinocoADSLIf,,,,,,
.1.3.6.1.4.1.11898.2.1.2.3.1,ORiNOCO-MIB::orinocoADSLIfConfig,,,,,,
.1.3.6.1.4.1.11898.2.1.2.3.1.1,ORiNOCO-MIB::orinocoADSLIfConfigBasic,,,,,,
.1.3.6.1.4.1.11898.2.1.2.3.1.1.1,ORiNOCO-MIB::oriADSLIfConfigBasicTable,,not-accessible,,current,,This table is used to configure the ADSL interface of the device.
.1.3.6.1.4.1.11898.2.1.2.3.1.1.1.1,ORiNOCO-MIB::oriADSLIfConfigBasicTableEntry,,not-accessible,ifIndex,current,,This object represents an entry in the ADSL interface 
.1.3.6.1.4.1.11898.2.1.2.3.1.1.1.1.1,ORiNOCO-MIB::oriADSLIfConfigBasicVCI,Integer32,read-write,,current,,This object is the identifier of a virtual connection with a 
.1.3.6.1.4.1.11898.2.1.2.3.1.1.1.1.2,ORiNOCO-MIB::oriADSLIfConfigBasicVPI,Integer32,read-write,,current,,This object is the identifier of a virtual path with a 
.1.3.6.1.4.1.11898.2.1.2.3.1.1.1.1.3,ORiNOCO-MIB::oriADSLIfConfigBasicEncapsulation,INTEGER,read-write,,current,rfc2684LlcSnapBridged(1):rfc2684LlcSnapRouted(2):rfc2684VcmuxBridged(3):rfc2684VcmuxRouted(4):rfc2364PPPoAVcmux(5):rfc2364PPPoALlc(6),This object is used to configure the ADSL encapsulation type:
.1.3.6.1.4.1.11898.2.1.2.3.1.1.2,ORiNOCO-MIB::oriADSLIfConfigBasicPPPoAUserName,OCTET,read-write,,current,,This object represents the PPPoA user name.
.1.3.6.1.4.1.11898.2.1.2.3.1.1.3,ORiNOCO-MIB::oriADSLIfConfigBasicPPPoAPassword,OCTET,read-write,,current,,This object represents the PPPoA password. This object  should be treated as write-only and returned as asterisks.
.1.3.6.1.4.1.11898.2.1.2.3.1.2,ORiNOCO-MIB::orinocoADSLIfConfigAdvanced,,,,,,
.1.3.6.1.4.1.11898.2.1.2.3.1.2.1,ORiNOCO-MIB::oriADSLIfConfigAdvTrellisCoding,INTEGER,read-write,,current,on(1):off(2),This object is used to turn Trellis Coding on or off.
.1.3.6.1.4.1.11898.2.1.2.3.1.2.2,ORiNOCO-MIB::oriADSLIfConfigAdvADSLProtocol,INTEGER,read-write,,current,auto(1):ansi(2):gdmt(3):glite(4),This object is used to configure the ADSL Protocol,
.1.3.6.1.4.1.11898.2.1.2.3.2,ORiNOCO-MIB::orinocoADSLIfStatistics,,,,,,
.1.3.6.1.4.1.11898.2.1.2.3.2.1,ORiNOCO-MIB::orinocoADSLIfStatBasic,,,,,,
.1.3.6.1.4.1.11898.2.1.2.3.2.1.1,ORiNOCO-MIB::oriADSLIfStatADSLLinkStatus,INTEGER,read-only,,current,idle(1):handshake(2):initializing(3):active(4),This object represents the modem status byte:
.1.3.6.1.4.1.11898.2.1.2.3.2.1.2,ORiNOCO-MIB::oriADSLIfStatADSLOperationalMode,INTEGER,read-only,,current,ansi(1):gdmt(2):glite(3),This object represents the current operating mode:
.1.3.6.1.4.1.11898.2.1.2.3.2.1.3,ORiNOCO-MIB::oriADSLIfStatADSLFarEndVendorID,OCTET,read-only,,current,,This object represents the ADSL Far end Vendor ID, which is 
.1.3.6.1.4.1.11898.2.1.2.3.2.1.4,ORiNOCO-MIB::oriADSLIfStatADSLChannelMode,INTEGER,read-only,,current,fast(1):interleaved(2),This object represents the current ADSL Channel mode:
.1.3.6.1.4.1.11898.2.1.2.3.2.1.5,ORiNOCO-MIB::oriADSLIfStatADSLDnStrRate,Integer32,read-only,,current,,This object represents the current downstream rate in kbps.
.1.3.6.1.4.1.11898.2.1.2.3.2.1.6,ORiNOCO-MIB::oriADSLIfStatADSLUpStrRate,Integer32,read-only,,current,,This object represents the current upstream rate in kbps.
.1.3.6.1.4.1.11898.2.1.2.3.2.1.7,ORiNOCO-MIB::oriADSLIfStatADSLLoopLength,Integer32,read-only,,current,,This object represents the estimated looplength to CO/DSLAM.
.1.3.6.1.4.1.11898.2.1.2.3.2.2,ORiNOCO-MIB::orinocoADSLIfStatAdvanced,,,,,,
.1.3.6.1.4.1.11898.2.1.2.3.2.2.1,ORiNOCO-MIB::oriADSLIfStatADSLLinkRetrainSinceReset,Counter32,read-only,,current,,This counter indicates the number of links retrain since reset.
.1.3.6.1.4.1.11898.2.1.2.3.2.2.2,ORiNOCO-MIB::oriADSLIfStatADSLLinkRetrainCurrDay,Counter32,read-only,,current,,This counter indicates the number of link retrain during 
.1.3.6.1.4.1.11898.2.1.2.3.2.2.3,ORiNOCO-MIB::oriADSLIfStatADSLLinkRetrainCurrInterval,Counter32,read-only,,current,,This counter indicates the number of link retrain during 
.1.3.6.1.4.1.11898.2.1.2.3.2.2.4,ORiNOCO-MIB::oriADSLIfStatADSLInitErrorSinceReset,Counter32,read-only,,current,,This counter indicates the number of initialization errors 
.1.3.6.1.4.1.11898.2.1.2.3.2.2.5,ORiNOCO-MIB::oriADSLIfStatADSLInitErrorCurrDay,Counter32,read-only,,current,,This counter indicates the number of initialization errors during 
.1.3.6.1.4.1.11898.2.1.2.3.2.2.6,ORiNOCO-MIB::oriADSLIfStatADSLInitErrorCurrInterval,Counter32,read-only,,current,,This counter indicates the number of initialization errors during 
.1.3.6.1.4.1.11898.2.1.2.3.2.2.7,ORiNOCO-MIB::oriADSLIfStatADSLInitTimeoutSinceReset,Counter32,read-only,,current,,This counter indicates the number of initialization timeout 
.1.3.6.1.4.1.11898.2.1.2.3.2.2.8,ORiNOCO-MIB::oriADSLIfStatADSLInitTimeoutCurrDay,Counter32,read-only,,current,,This counter indicates the number of initialization timeout during 
.1.3.6.1.4.1.11898.2.1.2.3.2.2.9,ORiNOCO-MIB::oriADSLIfStatADSLInitTimeoutCurrInterval,Counter32,read-only,,current,,This counter indicates the number of initialization timeout during 
.1.3.6.1.4.1.11898.2.1.2.3.2.2.10,ORiNOCO-MIB::oriADSLIfStatADSLLomsSinceReset,Counter32,read-only,,current,,This counter indicates the number of loss margin since reset.
.1.3.6.1.4.1.11898.2.1.2.3.2.2.11,ORiNOCO-MIB::oriADSLIfStatADSLLomsCurrDay,Counter32,read-only,,current,,This counter indicates the number of loss margin during 
.1.3.6.1.4.1.11898.2.1.2.3.2.2.12,ORiNOCO-MIB::oriADSLIfStatADSLLomsCurrInterval,Counter32,read-only,,current,,This counter indicates the number of loss margin during current 
.1.3.6.1.4.1.11898.2.1.2.3.2.2.13,ORiNOCO-MIB::oriADSLIfStatADSLUnavailableSecondsSinceReset,Counter32,read-only,,current,,This counter indicates the number of seconds the ADSL line has  not been connected since reset.
.1.3.6.1.4.1.11898.2.1.2.3.2.2.14,ORiNOCO-MIB::oriADSLIfStatADSLUnavailableSecondsCurrDay,Counter32,read-only,,current,,This counter indicates the number of seconds the ADSL line has 
.1.3.6.1.4.1.11898.2.1.2.3.2.2.15,ORiNOCO-MIB::oriADSLIfStatADSLUnavailableSecondsCurrInterval,Counter32,read-only,,current,,This counter indicates the number of seconds the ADSL line has not
.1.3.6.1.4.1.11898.2.1.2.3.2.2.16,ORiNOCO-MIB::oriADSLIfStatADSLUpStrNoiseMargin,Integer32,read-only,,current,,This object represents the current upstream noise margin.
.1.3.6.1.4.1.11898.2.1.2.3.2.2.17,ORiNOCO-MIB::oriADSLIfStatADSLDnStrNoiseMargin,Integer32,read-only,,current,,This object represents the current downstream noise margin.
.1.3.6.1.4.1.11898.2.1.2.3.2.2.18,ORiNOCO-MIB::oriADSLIfStatADSLUpStrHECCount,Counter32,read-only,,current,,This counter indicates the number of upstream received 
.1.3.6.1.4.1.11898.2.1.2.3.2.2.19,ORiNOCO-MIB::oriADSLIfStatADSLDnStrHECCount,Counter32,read-only,,current,,This counter indicates the number of downstream received 
.1.3.6.1.4.1.11898.2.1.2.3.2.3,ORiNOCO-MIB::orinocoADSLIfStatATMBasic,,,,,,
.1.3.6.1.4.1.11898.2.1.2.3.2.3.1,ORiNOCO-MIB::oriADSLIfStatATMProtocolStatus,INTEGER,read-only,,current,active(1):inactive(2):error(3),This object indicates the status of encapsulation protocol:
.1.3.6.1.4.1.11898.2.1.2.3.2.3.2,ORiNOCO-MIB::oriADSLIfStatATMATMLayer,INTEGER,read-only,,current,sync(1):unsync(2),This object indicates whether ATM Layer is in sync or not:
.1.3.6.1.4.1.11898.2.1.2.3.2.3.3,ORiNOCO-MIB::oriADSLIfStatATMThroughputUp,Integer32,read-only,,current,,This object indicates the upstream data throughput in Kbytes/s.
.1.3.6.1.4.1.11898.2.1.2.3.2.3.4,ORiNOCO-MIB::oriADSLIfStatATMThroughputDown,Integer32,read-only,,current,,This object indicates the downstream data throughput in Kbytes/s.
.1.3.6.1.4.1.11898.2.1.2.3.2.3.5,ORiNOCO-MIB::oriADSLIfStatATMPeakCellRate,Integer32,read-only,,current,,This object indicates the number of cells per second.
.1.3.6.1.4.1.11898.2.1.2.3.2.4,ORiNOCO-MIB::orinocoADSLIfStatATMAdvanced,,,,,,
.1.3.6.1.4.1.11898.2.1.2.3.2.4.1,ORiNOCO-MIB::oriADSLIfStatATMModemUpTime,OCTET,read-only,,current,,This counter indicates the elapsed time (day:hr:min:secs format)  since last ADSL link up.
.1.3.6.1.4.1.11898.2.1.2.3.2.4.2,ORiNOCO-MIB::oriADSLIfStatATMUnknownVCIVPICount,Counter32,read-only,,current,,This counter indicates the number of cells received with unknow
.1.3.6.1.4.1.11898.2.1.2.3.2.4.3,ORiNOCO-MIB::oriADSLIfStatATMRxCellCount,Counter64,read-only,,current,,This counter indicates the number of cells received since 
.1.3.6.1.4.1.11898.2.1.2.3.2.4.4,ORiNOCO-MIB::oriADSLIfStatATMTxCellCount,Counter64,read-only,,current,,This object indicates the number of cells transmitted since 
.1.3.6.1.4.1.11898.2.1.2.3.2.4.5,ORiNOCO-MIB::oriADSLIfStatATMRxByteCount,Counter64,read-only,,current,,This object indicates the number of bytes received since 
.1.3.6.1.4.1.11898.2.1.2.3.2.4.6,ORiNOCO-MIB::oriADSLIfStatATMTxByteCount,Counter64,read-only,,current,,This object indicates the number of bytes transmitted since 
.1.3.6.1.4.1.11898.2.1.2.3.2.4.7,ORiNOCO-MIB::oriADSLIfStatATMTxFrameCount,Counter32,read-only,,current,,This object indicates the number of frames transmitted since 
.1.3.6.1.4.1.11898.2.1.2.3.2.4.8,ORiNOCO-MIB::oriADSLIfStatATMRxFrameCount,Counter32,read-only,,current,,This object indicates the number of frames received since 
.1.3.6.1.4.1.11898.2.1.2.3.2.4.9,ORiNOCO-MIB::oriADSLIfStatATMRxBufOverruns,Counter32,read-only,,current,,This object indicates the number of buffer overruns since 
.1.3.6.1.4.1.11898.2.1.2.3.2.4.10,ORiNOCO-MIB::oriADSLIfStatATMRxAlignErrors,Counter32,read-only,,current,,This object indicates the number of alignment errors since
.1.3.6.1.4.1.11898.2.1.2.3.2.4.11,ORiNOCO-MIB::oriADSLIfStatATMHECErrors,Counter32,read-only,,current,,This object indicates the number of downstream HEC errors 
.1.3.6.1.4.1.11898.2.1.2.3.2.4.12,ORiNOCO-MIB::oriADSLIfStatATMCRCErrors,Counter32,read-only,,current,,This object indicates the number of downstream CRC errors since
.1.3.6.1.4.1.11898.2.1.2.3.2.4.13,ORiNOCO-MIB::oriADSLIfStatATMHECErrorsRate,Integer32,read-only,,current,,This object indicates the rate of downstream HEC errors.
.1.3.6.1.4.1.11898.2.1.2.3.2.4.14,ORiNOCO-MIB::oriADSLIfStatATMCRCErrorsRate,Integer32,read-only,,current,,This object indicates the rate of downstream CRC errors.
.1.3.6.1.4.1.11898.2.1.2.3.2.4.15,ORiNOCO-MIB::oriADSLIfStatATMLossCellDelination,Counter32,read-only,,current,,This object indicates the count of cell delination.
.1.3.6.1.4.1.11898.2.1.2.3.3,ORiNOCO-MIB::orinocoADSLIfDiagnosis,,,,,,
.1.3.6.1.4.1.11898.2.1.2.3.3.1,ORiNOCO-MIB::oriADSLIfDiagTestCommand,INTEGER,read-write,,current,hardware(1):togglelink(2):resetlink(3):oamloopback(4):snr(5),This object indicates the test command to execute:
.1.3.6.1.4.1.11898.2.1.2.3.3.2,ORiNOCO-MIB::oriADSLIfDiagHardwareTestResult,INTEGER,read-only,,current,success(1):failure(2):testing(3),This object indicates the hardware test status:
.1.3.6.1.4.1.11898.2.1.2.3.3.3,ORiNOCO-MIB::oriADSLIfDiagLinkStatus,INTEGER,read-only,,current,idle(1):handshake(2):training(3):active(4),This object indicates the current link status:
.1.3.6.1.4.1.11898.2.1.2.3.3.4,ORiNOCO-MIB::orinocoADSLIfDiagLoopBack,,,,,,
.1.3.6.1.4.1.11898.2.1.2.3.3.4.1,ORiNOCO-MIB::oriADSLIfDiagLoopBackVPI,Integer32,read-write,,current,,This object specifies the VPI number to perform the loopback 
.1.3.6.1.4.1.11898.2.1.2.3.3.4.2,ORiNOCO-MIB::oriADSLIfDiagLoopBackVCI,Integer32,read-write,,current,,This object specifies the VCI number to perform the loopback
.1.3.6.1.4.1.11898.2.1.2.3.3.4.3,ORiNOCO-MIB::oriADSLIfDiagLoopBackType,INTEGER,read-write,,current,f5end(1):f4end(2):f5seg(3):f4seg(4),The object specifies the type of loopback test to be performed.
.1.3.6.1.4.1.11898.2.1.2.3.3.4.4,ORiNOCO-MIB::oriADSLIfDiagLoopBackTest,Integer32,read-only,,current,,This object indicates the elapsed time (in mili-seconds) before 
.1.3.6.1.4.1.11898.2.1.2.3.3.5,ORiNOCO-MIB::oriADSLIfDiagActivePVCTable,,not-accessible,,current,,This table is used to configure/diagnose the ADSL interface active PVC.
.1.3.6.1.4.1.11898.2.1.2.3.3.5.1,ORiNOCO-MIB::oriADSLIfDiagActivePVCTableEntry,,not-accessible,ifIndex,current,,This object represents an entry in the ADSL interface active
.1.3.6.1.4.1.11898.2.1.2.3.3.5.1.1,ORiNOCO-MIB::oriADSLIfDiagActivePVCTableIndex,Integer32,read-only,,current,,This object represents the index of the ADSL active PVC Table.
.1.3.6.1.4.1.11898.2.1.2.3.3.5.1.2,ORiNOCO-MIB::oriADSLIfDiagVPIActivePVC,Integer32,read-only,,current,,This object represents an identifier of a virtual connection
.1.3.6.1.4.1.11898.2.1.2.3.3.5.1.3,ORiNOCO-MIB::oriADSLIfDiagVCIActivePVC,Integer32,read-only,,current,,This object represents an identifier of a virtual path with a 
.1.3.6.1.4.1.11898.2.1.2.3.3.5.1.4,ORiNOCO-MIB::oriADSLIfDiagEchoActivePVC,INTEGER,read-write,,current,on(1):off(2),This object is used to configure echo mode on or off.
.1.3.6.1.4.1.11898.2.1.2.3.3.5.1.5,ORiNOCO-MIB::oriADSLIfDiagEncapActivePVC,INTEGER,read-only,,current,rfc2684LlcSnapBridged(1):rfc2684LlcSnapRouted(2):rfc2684VcmuxBridged(3):rfc2684VcmuxRouted(4):rfc2364PPPoAVcmux(5):rfc2364PPPoALlc(6),This object represents the active PVC encapsulation format, which
.1.3.6.1.4.1.11898.2.1.2.3.3.6,ORiNOCO-MIB::oriADSLIfDiagLastUnknownPVC,OCTET,read-only,,current,,This object represents the last ATM cell with unknown PVC.
.1.3.6.1.4.1.11898.2.1.2.3.3.7,ORiNOCO-MIB::oriADSLIfDiagSignalNoiseRatio,OCTET,read-only,,current,,This object represents a 257 signed bytes for SNR value. The last  byte indicates availability; A value of 0 indicates not ready and  a value of 1 indicates ready.
.1.3.6.1.4.1.11898.2.1.2.3.3.8,ORiNOCO-MIB::oriADSLIfDiagResetStatistics,INTEGER,read-write,,current,,This object is used to reset the statistics. Setting this object
.1.3.6.1.4.1.11898.2.1.2.3.3.9,ORiNOCO-MIB::oriADSLIfDiagLastErrorMsg,OCTET,read-only,,current,,This object represents the last error message of test failure.
.1.3.6.1.4.1.11898.2.1.2.3.3.10,ORiNOCO-MIB::oriADSLIfDiagNumActivePVC,Integer32,read-only,,current,,This object represents the number of active PVC.
.1.3.6.1.4.1.11898.2.1.2.4,ORiNOCO-MIB::oriIfWANInterfaceMACAddress,OCTET,read-write,,current,,This object represents the MAC address of the WAN interface.
.1.3.6.1.4.1.11898.2.1.2.5,ORiNOCO-MIB::orinocoWORPIf,,,,,,
.1.3.6.1.4.1.11898.2.1.2.5.1,ORiNOCO-MIB::oriWORPIfConfigTable,,not-accessible,,current,,This table is used to configure the mode, time-outs, and protocol 
.1.3.6.1.4.1.11898.2.1.2.5.1.1,ORiNOCO-MIB::oriWORPIfConfigTableEntry,,not-accessible,ifIndex,current,,This object represents an entry in the WORP Interface Configuration Table.
.1.3.6.1.4.1.11898.2.1.2.5.1.1.1,ORiNOCO-MIB::oriWORPIfConfigTableMode,INTEGER,read-write,,current,disabled(1):ap(2):base(3):satellite(4),The running mode of this interface:  - If set to disabled, the interface is disabled. - If set to AP, the interface will run in standard IEEE802.11  mode. - If set to Base, the interface will be a WORP master  interface and be able to connect to multiple WORP satellites. - If set to Satellite, the interface will be a WORP slave  interface.
.1.3.6.1.4.1.11898.2.1.2.5.1.1.2,ORiNOCO-MIB::oriWORPIfConfigTableBaseStationName,OCTET,read-write,,current,,The name of the base station. For a base this name will default  to the MIB-II sysName; for a satellite to empty (if not registered  to any base) or the name it is registered to. When a name is set  for a satellite, the satellite will only register on a base  with this name.
.1.3.6.1.4.1.11898.2.1.2.5.1.1.3,ORiNOCO-MIB::oriWORPIfConfigTableMaxSatellites,Integer32,read-write,,current,,The maximum of remotes allowed on this interface. Please note  that this value will also be limited by the image and the  license.
.1.3.6.1.4.1.11898.2.1.2.5.1.1.4,ORiNOCO-MIB::oriWORPIfConfigTableRegistrationTimeout,Integer32,read-write,,current,,This object represents the Timeout of regristration and  authentication, configurable between 1sec and 10sec.
.1.3.6.1.4.1.11898.2.1.2.5.1.1.5,ORiNOCO-MIB::oriWORPIfConfigTableRetries,Integer32,read-write,,current,,The number of times a data message will be retransmitted, configurable between 0 and 10. The value 0 allows unreliable  operation for streaming applications.
.1.3.6.1.4.1.11898.2.1.2.5.1.1.6,ORiNOCO-MIB::oriWORPIfConfigTableNetworkSecret,OCTET,read-write,,current,,The NetworkSecret is a string that must be the same for all  stations in a certain network. If a station has another secret  configured as the base, the base will not allow the station to  register. This object should be treated as write-only and  returned as asterisks.
.1.3.6.1.4.1.11898.2.1.2.5.2,ORiNOCO-MIB::oriWORPIfStatTable,,not-accessible,,current,,This table is used to monitor the statistics of interfaces that 
.1.3.6.1.4.1.11898.2.1.2.5.2.1,ORiNOCO-MIB::oriWORPIfStatTableEntry,,not-accessible,ifIndex,current,,This object represents an entry in the WORP Interface Statistics Table.
.1.3.6.1.4.1.11898.2.1.2.5.2.1.1,ORiNOCO-MIB::oriWORPIfStatTableRemotePartners,Counter32,read-only,,current,,The number of remote partners. For a satellite, this parameter will always be zero or one.
.1.3.6.1.4.1.11898.2.1.2.5.2.1.2,ORiNOCO-MIB::oriWORPIfStatTableAverageLocalSignal,Integer32,read-only,,current,,The current signal level calculated over all inbound packets. This variable indicates the running average of the local signal  level using the algorithm (3/4*oldvalue + 1/4*newvalue).
.1.3.6.1.4.1.11898.2.1.2.5.2.1.3,ORiNOCO-MIB::oriWORPIfStatTableAverageLocalNoise,Integer32,read-only,,current,,The current noise level calculated over all inbound packets. This variable indicates the running average of the local noise  level using the algorithm (3/4*oldvalue + 1/4*newvalue).
.1.3.6.1.4.1.11898.2.1.2.5.2.1.4,ORiNOCO-MIB::oriWORPIfStatTableAverageRemoteSignal,Integer32,read-only,,current,,The current remote signal level calculated over the inbound  packets send by this station. This variable indicates the  running average over all registered stations of the remote  signal level using the algorithm (3/4*oldvalue + 1/4*newvalue).
.1.3.6.1.4.1.11898.2.1.2.5.2.1.5,ORiNOCO-MIB::oriWORPIfStatTableAverageRemoteNoise,Integer32,read-only,,current,,The current average remote noise level calculated over the  inbound packets send by this station. This variable indicates  the running average over all registered stations of the remote  noise level using the algorithm (3/4*oldvalue + 1/4*newvalue).
.1.3.6.1.4.1.11898.2.1.2.5.2.1.6,ORiNOCO-MIB::oriWORPIfStatTableBaseStationAnnounces,Counter32,read-only,,current,,The number of Base Station Announces Broadcasts (BSAB) sent  (base) or received (satellite) on this interface.
.1.3.6.1.4.1.11898.2.1.2.5.2.1.7,ORiNOCO-MIB::oriWORPIfStatTableRegistrationRequests,Counter32,read-only,,current,,The number of Registration Requests (RREQ) sent (satellite) or  received (base) on this interface.
.1.3.6.1.4.1.11898.2.1.2.5.2.1.8,ORiNOCO-MIB::oriWORPIfStatTableRegistrationRejects,Counter32,read-only,,current,,The number of Registration Rejects (RREJ) sent (base) or  received (satellite) on this interface.
.1.3.6.1.4.1.11898.2.1.2.5.2.1.9,ORiNOCO-MIB::oriWORPIfStatTableAuthenticationRequests,Counter32,read-only,,current,,The number of Authentication Requests (AREQ) sent (satellite) or  received (base) on this interface.
.1.3.6.1.4.1.11898.2.1.2.5.2.1.10,ORiNOCO-MIB::oriWORPIfStatTableAuthenticationConfirms,Counter32,read-only,,current,,The number of Authentication Confirms (ACFM) sent (base) or  received (satellite) on this interface.
.1.3.6.1.4.1.11898.2.1.2.5.2.1.11,ORiNOCO-MIB::oriWORPIfStatTableRegistrationAttempts,Counter32,read-only,,current,,The number of times a Registration Attempt has been initiated.
.1.3.6.1.4.1.11898.2.1.2.5.2.1.12,ORiNOCO-MIB::oriWORPIfStatTableRegistrationIncompletes,Counter32,read-only,,current,,The number of registration attempts that is not completed yet.  For a satellite this parameters will always be zero or one.
.1.3.6.1.4.1.11898.2.1.2.5.2.1.13,ORiNOCO-MIB::oriWORPIfStatTableRegistrationTimeouts,Counter32,read-only,,current,,The number of times the registration procedure timed out.
.1.3.6.1.4.1.11898.2.1.2.5.2.1.14,ORiNOCO-MIB::oriWORPIfStatTableRegistrationLastReason,INTEGER,read-only,,current,none(1):noMoreAllowed(2):incorrectParameter(3):roaming(4):timeout(5):lowQuality(6),The reason for why the last registration was aborted or failed.
.1.3.6.1.4.1.11898.2.1.2.5.2.1.15,ORiNOCO-MIB::oriWORPIfStatTablePollData,Counter32,read-only,,current,,The number of polls with data sent (base) or received  (satellite).
.1.3.6.1.4.1.11898.2.1.2.5.2.1.16,ORiNOCO-MIB::oriWORPIfStatTablePollNoData,Counter32,read-only,,current,,The number of polls with no data sent (base) or received  (satellite).
.1.3.6.1.4.1.11898.2.1.2.5.2.1.17,ORiNOCO-MIB::oriWORPIfStatTableReplyData,Counter32,read-only,,current,,The number of poll replies with data sent (satellite) or  received (base). This counter does not include replies with the  MoreData flag set (see ReplyMoreData).
.1.3.6.1.4.1.11898.2.1.2.5.2.1.18,ORiNOCO-MIB::oriWORPIfStatTableReplyMoreData,Counter32,read-only,,current,,The number of poll replies with data sent (satellite) or  received (base) with the MoreData flag set (see also ReplyData).
.1.3.6.1.4.1.11898.2.1.2.5.2.1.19,ORiNOCO-MIB::oriWORPIfStatTableReplyNoData,Counter32,read-only,,current,,The number of poll replies with no data sent (satellite) or  received (base).
.1.3.6.1.4.1.11898.2.1.2.5.2.1.20,ORiNOCO-MIB::oriWORPIfStatTableRequestForService,Counter32,read-only,,current,,The number of requests for service sent (satellite) or  received (base).
.1.3.6.1.4.1.11898.2.1.2.5.2.1.21,ORiNOCO-MIB::oriWORPIfStatTableSendSuccess,Counter32,read-only,,current,,The number of data packets sent that were acknowledged and did  not need a retransmit.
.1.3.6.1.4.1.11898.2.1.2.5.2.1.22,ORiNOCO-MIB::oriWORPIfStatTableSendRetries,Counter32,read-only,,current,,The number of data packets sent that needed retransmition but  were finally received succesfully by the remote partner.
.1.3.6.1.4.1.11898.2.1.2.5.2.1.23,ORiNOCO-MIB::oriWORPIfStatTableSendFailures,Counter32,read-only,,current,,The number of data packets sent that were (finally) not received  succesfully by the remote partner.
.1.3.6.1.4.1.11898.2.1.2.5.2.1.24,ORiNOCO-MIB::oriWORPIfStatTableReceiveSuccess,Counter32,read-only,,current,,The number of data packets received that were acknowledged and  did not need a retransmit of the remote partner.
.1.3.6.1.4.1.11898.2.1.2.5.2.1.25,ORiNOCO-MIB::oriWORPIfStatTableReceiveRetries,Counter32,read-only,,current,,The number of data packets received that needed retransmition by  the remote partner but were finally received succesfully.
.1.3.6.1.4.1.11898.2.1.2.5.2.1.26,ORiNOCO-MIB::oriWORPIfStatTableReceiveFailures,Counter32,read-only,,current,,The number of data packets that were (finally) not received  succesfully.
.1.3.6.1.4.1.11898.2.1.2.5.2.1.27,ORiNOCO-MIB::oriWORPIfStatTablePollNoReplies,Counter32,read-only,,current,,The number of times a poll was sent but no reply was received.  This object only applies to the base.
.1.3.6.1.4.1.11898.2.1.3,ORiNOCO-MIB::orinocoNet,,,,,,
.1.3.6.1.4.1.11898.2.1.3.1,ORiNOCO-MIB::orinocoNetIP,,,,,,
.1.3.6.1.4.1.11898.2.1.3.1.1,ORiNOCO-MIB::oriNetworkIPConfigTable,,not-accessible,,current,,This table contains the Network IP configuration for the network  interface(s) of the device. For bridge mode, only the address  assigned to the Ethernet interface (index 1) will be used.
.1.3.6.1.4.1.11898.2.1.3.1.1.1,ORiNOCO-MIB::oriNetworkIPConfigTableEntry,,not-accessible,oriNetworkIPConfigTableIndex,current,,This object represents an entry for the network IP configuration  for each interface in the system.
.1.3.6.1.4.1.11898.2.1.3.1.1.1.1,ORiNOCO-MIB::oriNetworkIPConfigTableIndex,Integer32,read-only,,current,,This object represents an index or interface number in the 
.1.3.6.1.4.1.11898.2.1.3.1.1.1.2,ORiNOCO-MIB::oriNetworkIPConfigIPAddress,IpAddress,read-write,,current,,This object represents the IP Address of the network interface.
.1.3.6.1.4.1.11898.2.1.3.1.1.1.3,ORiNOCO-MIB::oriNetworkIPConfigSubnetMask,IpAddress,read-write,,current,,This object represents the subnet mask of the network interface.
.1.3.6.1.4.1.11898.2.1.3.1.3,ORiNOCO-MIB::oriNetworkIPDefaultRouterIPAddress,IpAddress,read-write,,current,,This object represents the IP address of the gateway or router
.1.3.6.1.4.1.11898.2.1.3.1.4,ORiNOCO-MIB::oriNetworkIPDefaultTTL,Integer32,read-write,,current,,The default value inserted into the Time-To-Live (TTL) field of 
.1.3.6.1.4.1.11898.2.1.3.1.5,ORiNOCO-MIB::oriNetworkIPAddressType,INTEGER,read-write,,current,static(1):dynamic(2),This object identifies if the device is configured to be 
.1.3.6.1.4.1.11898.2.1.3.2,ORiNOCO-MIB::orinocoNetIPX,,,,,,
.1.3.6.1.4.1.11898.2.1.3.2.1,ORiNOCO-MIB::oriNetworkIPXProtocolSupport,INTEGER,read-write,,current,ip(1):ipx(2):both(3),This object represents what protocol will be active or supported
.1.3.6.1.4.1.11898.2.1.3.2.2,ORiNOCO-MIB::oriNetworkIPXDefaultRouterNodeNumber,OCTET,read-write,,current,,If the source IPX network number is not equal to the destination 
.1.3.6.1.4.1.11898.2.1.3.2.3,ORiNOCO-MIB::oriNetworkIPXEthernetEncapsulationFormat,INTEGER,read-write,,current,ethII802dot3encapsulation(1):eth802dot3withSNAPHdr(2):eth802dot3withoutSNAPHdr(3),This object represents the encapsulation type to be used for the 
.1.3.6.1.4.1.11898.2.1.3.2.4,ORiNOCO-MIB::oriNetworkIPXWiredtoWirelessBridgedPacketCount,Counter32,read-only,,current,,This object represents the number of packets bridged from the 
.1.3.6.1.4.1.11898.2.1.3.2.5,ORiNOCO-MIB::oriNetworkIPXWirelesstoWiredBridgedPacketCount,Counter32,read-only,,current,,This object represents the number of packets bridged from the 
.1.3.6.1.4.1.11898.2.1.3.2.6,ORiNOCO-MIB::oriNetworkIPXClientTable,,not-accessible,,current,,This table provides statistics for the IPX clients (AS Clients using the IPX protocol) connected to the AS-2000 device.
.1.3.6.1.4.1.11898.2.1.3.2.6.1,ORiNOCO-MIB::oriNetworkIPXClientEntry,,not-accessible,oriNetworkIPXPPPSessionId,current,,This object represents an entry in the IPX client table.
.1.3.6.1.4.1.11898.2.1.3.2.6.1.1,ORiNOCO-MIB::oriNetworkIPXPPPSessionId,Integer32,read-only,,current,,This object represents the PPP Session ID assigned by the  AS-2000 to the IPX client (AS Client).
.1.3.6.1.4.1.11898.2.1.3.2.6.1.2,ORiNOCO-MIB::oriNetworkIPXClientNetworkNumber,OCTET,read-only,,current,,This object represents the IPX Node Number assigned by a Novell  Server to the IPX client (AS Client).
.1.3.6.1.4.1.11898.2.1.3.2.6.1.3,ORiNOCO-MIB::oriNetworkIPXClientMAC,OCTET,read-only,,current,,This object represents the wireless interface MAC of the  IPX client (AS Client).
.1.3.6.1.4.1.11898.2.1.3.2.6.1.4,ORiNOCO-MIB::oriNetworkIPXClientTableEntryStatus,INTEGER,read-write,,current,enable(1):disable(2):delete(3),This object is used to indicate whether an IPX client (AS Client) is active or inactive. This object is also used to terminate an IPX client session/connection.
.1.3.6.1.4.1.11898.2.1.4,ORiNOCO-MIB::orinocoSNMP,,,,,,
.1.3.6.1.4.1.11898.2.1.4.1,ORiNOCO-MIB::oriSNMPReadPassword,OCTET,read-write,,current,,This object represents the read-only community name used in the
.1.3.6.1.4.1.11898.2.1.4.2,ORiNOCO-MIB::oriSNMPReadWritePassword,OCTET,read-write,,current,,This objecgt represents the read-write community name used in 
.1.3.6.1.4.1.11898.2.1.4.3,ORiNOCO-MIB::oriSNMPAuthorizedManagerCount,Counter32,read-only,,current,,This object reflects the number of entries in the Management IP 
.1.3.6.1.4.1.11898.2.1.4.4,ORiNOCO-MIB::oriSNMPAccessTable,,not-accessible,,current,,This table is used configure management stations that are
.1.3.6.1.4.1.11898.2.1.4.4.1,ORiNOCO-MIB::oriSNMPAccessTableEntry,,not-accessible,oriSNMPAccessTableIndex,current,,This object identifies an entry in the Management IP Access 
.1.3.6.1.4.1.11898.2.1.4.4.1.1,ORiNOCO-MIB::oriSNMPAccessTableIndex,Integer32,read-only,,current,,This object represents the index for the Management IP Access
.1.3.6.1.4.1.11898.2.1.4.4.1.2,ORiNOCO-MIB::oriSNMPAccessTableIPAddress,IpAddress,read-write,,current,,This object represents the IP address of the management station
.1.3.6.1.4.1.11898.2.1.4.4.1.3,ORiNOCO-MIB::oriSNMPAccessTableIPMask,IpAddress,read-write,,current,,This object represents the IP subnet mask. This object can
.1.3.6.1.4.1.11898.2.1.4.4.1.4,ORiNOCO-MIB::oriSNMPAccessTableInterfaceBitmask,Integer32,read-write,,current,,This object is used to control the interface access for each 
.1.3.6.1.4.1.11898.2.1.4.4.1.5,ORiNOCO-MIB::oriSNMPAccessTableComment,OCTET,read-write,,current,,This object is used for an optional comment associated to the 
.1.3.6.1.4.1.11898.2.1.4.4.1.6,ORiNOCO-MIB::oriSNMPAccessTableEntryStatus,INTEGER,read-write,,current,enable(1):disable(2):delete(3):create(4),This object is used to enable, disable, delete, or create an 
.1.3.6.1.4.1.11898.2.1.4.5,ORiNOCO-MIB::oriSNMPTrapHostTable,,not-accessible,,current,,This table contains the information regarding the trap host that 
.1.3.6.1.4.1.11898.2.1.4.5.1,ORiNOCO-MIB::oriSNMPTrapHostTableEntry,,not-accessible,oriSNMPTrapHostTableIndex,current,,This object identifies an entry in the SNMP Trap Host Table.
.1.3.6.1.4.1.11898.2.1.4.5.1.1,ORiNOCO-MIB::oriSNMPTrapHostTableIndex,Integer32,read-only,,current,,This object is used as an index for the SNMP Trap Host Table.
.1.3.6.1.4.1.11898.2.1.4.5.1.2,ORiNOCO-MIB::oriSNMPTrapHostTableIPAddress,IpAddress,read-write,,current,,This object represents the IP address of the management station
.1.3.6.1.4.1.11898.2.1.4.5.1.3,ORiNOCO-MIB::oriSNMPTrapHostTablePassword,OCTET,read-write,,current,,This object represents the password that is sent with the SNMP
.1.3.6.1.4.1.11898.2.1.4.5.1.4,ORiNOCO-MIB::oriSNMPTrapHostTableComment,OCTET,read-write,,current,,This object is used for an optional comment associated to the 
.1.3.6.1.4.1.11898.2.1.4.5.1.5,ORiNOCO-MIB::oriSNMPTrapHostTableEntryStatus,INTEGER,read-write,,current,enable(1):disable(2):delete(3):create(4),This object is used to enable, disable, delete, create an 
.1.3.6.1.4.1.11898.2.1.4.7,ORiNOCO-MIB::oriSNMPInterfaceBitmask,Integer32,read-write,,current,,This object is used to control the interface access for SNMP  based management (not HTTP and Telnet).
.1.3.6.1.4.1.11898.2.1.4.8,ORiNOCO-MIB::oriSNMPErrorMessage,OCTET,read-only,,current,,This object is used to provide additional information in case of an SNMP error.
.1.3.6.1.4.1.11898.2.1.4.9,ORiNOCO-MIB::oriSNMPAccessTableStatus,INTEGER,read-write,,current,enable(1):disable(2),This object is used to enable or disable the Management IP Access
.1.3.6.1.4.1.11898.2.1.5,ORiNOCO-MIB::orinocoFiltering,,,,,,
.1.3.6.1.4.1.11898.2.1.5.1,ORiNOCO-MIB::orinocoProtocolFilter,,,,,,
.1.3.6.1.4.1.11898.2.1.5.1.1,ORiNOCO-MIB::oriProtocolFilterOperationType,INTEGER,read-write,,current,passthru(1):block(2),This object is used to passthru (allow) or block (deny) packets
.1.3.6.1.4.1.11898.2.1.5.1.2,ORiNOCO-MIB::oriProtocolFilterTable,,not-accessible,,current,,This table contains the two byte hexadecimal values of the 
.1.3.6.1.4.1.11898.2.1.5.1.2.1,ORiNOCO-MIB::oriProtocolFilterTableEntry,,not-accessible,oriProtocolFilterTableIndex,current,,This object represents an entry in the protocol filter table.
.1.3.6.1.4.1.11898.2.1.5.1.2.1.1,ORiNOCO-MIB::oriProtocolFilterTableIndex,Integer32,read-only,,current,,This object is used to index the protocol filter table.
.1.3.6.1.4.1.11898.2.1.5.1.2.1.2,ORiNOCO-MIB::oriProtocolFilterProtocol,OCTET,read-write,,current,,This object represents a two byte hexadecimal value for the 
.1.3.6.1.4.1.11898.2.1.5.1.2.1.3,ORiNOCO-MIB::oriProtocolFilterProtocolComment,OCTET,read-write,,current,,This object is used as an optional comment for the ethernet 
.1.3.6.1.4.1.11898.2.1.5.1.2.1.4,ORiNOCO-MIB::oriProtocolFilterTableEntryStatus,INTEGER,read-write,,current,enable(1):disable(2):delete(3):create(4),This object is used to enable, disable, delete, create the 
.1.3.6.1.4.1.11898.2.1.5.1.2.1.5,ORiNOCO-MIB::oriProtocolFilterTableInterfaceBitmask,Integer32,read-write,,current,,This object is isued to control protocol filtering per interface
.1.3.6.1.4.1.11898.2.1.5.1.2.1.6,ORiNOCO-MIB::oriProtocolFilterProtocolString,OCTET,read-write,,current,,This object represents the value in the protocol field of the 
.1.3.6.1.4.1.11898.2.1.5.1.3,ORiNOCO-MIB::oriProtocolFilterInterfaceBitmask,Integer32,read-write,,current,,This object is isued to control protocol filtering per interface
.1.3.6.1.4.1.11898.2.1.5.2,ORiNOCO-MIB::orinocoAccessControl,,,,,,
.1.3.6.1.4.1.11898.2.1.5.2.1,ORiNOCO-MIB::oriAccessControlStatus,INTEGER,read-write,,current,enable(1):disable(2),This object is used to enable or disable MAC Access Control 
.1.3.6.1.4.1.11898.2.1.5.2.2,ORiNOCO-MIB::oriAccessControlOperationType,INTEGER,read-write,,current,passthru(1):block(2),This flag determines whether the stations with MAC addresses 
.1.3.6.1.4.1.11898.2.1.5.2.3,ORiNOCO-MIB::oriAccessControlTable,,not-accessible,,current,,This table contains the information about MAC addresses of the 
.1.3.6.1.4.1.11898.2.1.5.2.3.1,ORiNOCO-MIB::oriAccessControlEntry,,not-accessible,oriAccessControlTableIndex,current,,This object represents the entry in the access control table.
.1.3.6.1.4.1.11898.2.1.5.2.3.1.1,ORiNOCO-MIB::oriAccessControlTableIndex,Integer32,read-only,,current,,This object is used as an index for the access control table.
.1.3.6.1.4.1.11898.2.1.5.2.3.1.2,ORiNOCO-MIB::oriAccessControlTableMACAddress,OCTET,read-write,,current,,This object represents the MAC address of the wireless station 
.1.3.6.1.4.1.11898.2.1.5.2.3.1.3,ORiNOCO-MIB::oriAccessControlTableComment,OCTET,read-write,,current,,This object is used as an optional comment associated to the 
.1.3.6.1.4.1.11898.2.1.5.2.3.1.4,ORiNOCO-MIB::oriAccessControlTableEntryStatus,INTEGER,read-write,,current,enable(1):disable(2):delete(3):create(4),This object is used to enable, disable, delete, create the entries
.1.3.6.1.4.1.11898.2.1.5.3,ORiNOCO-MIB::orinocoStaticMACAddressFilter,,,,,,
.1.3.6.1.4.1.11898.2.1.5.3.1,ORiNOCO-MIB::oriStaticMACAddressFilterTable,,not-accessible,,current,,This table provides the MAC address of the stations on the wired 
.1.3.6.1.4.1.11898.2.1.5.3.1.1,ORiNOCO-MIB::oriStaticMACAddressFilterEntry,,not-accessible,oriStaticMACAddressFilterTableIndex,current,,This object identifies the entry in the Static MAC address 
.1.3.6.1.4.1.11898.2.1.5.3.1.1.1,ORiNOCO-MIB::oriStaticMACAddressFilterTableIndex,Integer32,read-only,,current,,This object is used as an index for the Static MAC address 
.1.3.6.1.4.1.11898.2.1.5.3.1.1.2,ORiNOCO-MIB::oriStaticMACAddressFilterWiredAddress,OCTET,read-write,,current,,This object represents the MAC address of the station on the 
.1.3.6.1.4.1.11898.2.1.5.3.1.1.3,ORiNOCO-MIB::oriStaticMACAddressFilterWiredMask,OCTET,read-write,,current,,This mask determines the presence of wildcard characters in the 
.1.3.6.1.4.1.11898.2.1.5.3.1.1.4,ORiNOCO-MIB::oriStaticMACAddressFilterWirelessAddress,OCTET,read-write,,current,,This object represents the MAC address of the station on the 
.1.3.6.1.4.1.11898.2.1.5.3.1.1.5,ORiNOCO-MIB::oriStaticMACAddressFilterWirelessMask,OCTET,read-write,,current,,The mask that determines the presence of wildcard characters in 
.1.3.6.1.4.1.11898.2.1.5.3.1.1.6,ORiNOCO-MIB::oriStaticMACAddressFilterTableEntryStatus,INTEGER,read-write,,current,enable(1):disable(2):delete(3):create(4),This object is used to enable, disable, delete, create an entry
.1.3.6.1.4.1.11898.2.1.5.3.1.1.7,ORiNOCO-MIB::oriStaticMACAddressFilterComment,OCTET,read-write,,current,,This object is used for an optional comment associated to the 
.1.3.6.1.4.1.11898.2.1.5.4,ORiNOCO-MIB::orinocoStormThreshold,,,,,,
.1.3.6.1.4.1.11898.2.1.5.4.1,ORiNOCO-MIB::oriBroadcastAddressThreshold,Integer32,read-write,,current,,If broadcast rate from any device (identified by its MAC address) 
.1.3.6.1.4.1.11898.2.1.5.4.2,ORiNOCO-MIB::oriMulticastAddressThreshold,Integer32,read-write,,current,,If multicast rate from any device (identified by its MAC address) 
.1.3.6.1.4.1.11898.2.1.5.4.3,ORiNOCO-MIB::oriStormThresholdTable,,not-accessible,,current,,The table containing broadcast and multicast threshold values for 
.1.3.6.1.4.1.11898.2.1.5.4.3.1,ORiNOCO-MIB::oriStormThresholdTableEntry,,not-accessible,ifIndex,current,,This object represents an entry in the storm threshold filter 
.1.3.6.1.4.1.11898.2.1.5.4.3.1.1,ORiNOCO-MIB::oriStormThresholdIfBroadcast,Integer32,read-write,,current,,This parameter specifies a set of Broadcast Storm thresholds for 
.1.3.6.1.4.1.11898.2.1.5.4.3.1.2,ORiNOCO-MIB::oriStormThresholdIfMulticast,Integer32,read-write,,current,,This parameter specifies a set of Multicast Storm thresholds for 
.1.3.6.1.4.1.11898.2.1.5.5,ORiNOCO-MIB::orinocoPortFilter,,,,,,
.1.3.6.1.4.1.11898.2.1.5.5.1,ORiNOCO-MIB::oriPortFilterStatus,INTEGER,read-write,,current,enable(1):disable(2),This object is used to enable or disable port filtering.
.1.3.6.1.4.1.11898.2.1.5.5.2,ORiNOCO-MIB::oriPortFilterOperationType,INTEGER,read-write,,current,passthru(1):block(2),This object determines whether the stations with ports 
.1.3.6.1.4.1.11898.2.1.5.5.3,ORiNOCO-MIB::oriPortFilterTable,,not-accessible,,current,,This table contains the Port number of packets to be filtered. 
.1.3.6.1.4.1.11898.2.1.5.5.3.1,ORiNOCO-MIB::oriPortFilterTableEntry,,not-accessible,oriPortFilterTableEntryIndex,current,,This parameter represents the entry in the port filter table.
.1.3.6.1.4.1.11898.2.1.5.5.3.1.1,ORiNOCO-MIB::oriPortFilterTableEntryIndex,Integer32,read-only,,current,,This object is used as the index for the port filter table. This
.1.3.6.1.4.1.11898.2.1.5.5.3.1.2,ORiNOCO-MIB::oriPortFilterTableEntryPort,Integer32,read-write,,current,,This object represents the port number of the packets to be 
.1.3.6.1.4.1.11898.2.1.5.5.3.1.3,ORiNOCO-MIB::oriPortFilterTableEntryPortType,INTEGER,read-write,,current,tcp(1):udp(2):both(3),This object specifies the port type.
.1.3.6.1.4.1.11898.2.1.5.5.3.1.4,ORiNOCO-MIB::oriPortFilterTableEntryInterfaceBitmask,Integer32,read-write,,current,,This object is used to control port filtering per interface for 
.1.3.6.1.4.1.11898.2.1.5.5.3.1.5,ORiNOCO-MIB::oriPortFilterTableEntryComment,OCTET,read-write,,current,,This object is used for an optional comment associated to the 
.1.3.6.1.4.1.11898.2.1.5.5.3.1.6,ORiNOCO-MIB::oriPortFilterTableEntryStatus,INTEGER,read-write,,current,enable(1):disable(2):delete(3):create(4),This object is used to enable, disable, delete, create an entry
.1.3.6.1.4.1.11898.2.1.5.6,ORiNOCO-MIB::orinocoAdvancedFiltering,,,,,,
.1.3.6.1.4.1.11898.2.1.5.6.1,ORiNOCO-MIB::oriBroadcastFilteringTable,,not-accessible,,current,,The table entries for broadcast filters. This table shall contain
.1.3.6.1.4.1.11898.2.1.5.6.1.1,ORiNOCO-MIB::oriBroadcastFilteringTableEntry,,not-accessible,oriBroadcastFilteringTableIndex,current,,This object represents an entry in the broadcast filtering 
.1.3.6.1.4.1.11898.2.1.5.6.1.1.1,ORiNOCO-MIB::oriBroadcastFilteringTableIndex,Integer32,read-only,,current,,This object represents the index of the Broadcast Filtering table.
.1.3.6.1.4.1.11898.2.1.5.6.1.1.2,ORiNOCO-MIB::oriBroadcastFilteringProtocolName,OCTET,read-only,,current,,This object represents the broadcast protocol name to be filtered.
.1.3.6.1.4.1.11898.2.1.5.6.1.1.3,ORiNOCO-MIB::oriBroadcastFilteringDirection,INTEGER,read-write,,current,ethernetToWireless(1):wirelessToEthernet(2):both(3),This object represents the direction of the broadcast filter. The filter can be enabled for Ethernet to Wireless, Wireless to Ethernet, or both directions.
.1.3.6.1.4.1.11898.2.1.5.6.1.1.4,ORiNOCO-MIB::oriBroadcastFilteringTableEntryStatus,INTEGER,read-write,,current,enable(1):disable(2),This object is used to enable or disable the broadcast filter table enteries.
.1.3.6.1.4.1.11898.2.1.5.7,ORiNOCO-MIB::orinocoPacketForwarding,,,,,,
.1.3.6.1.4.1.11898.2.1.5.7.1,ORiNOCO-MIB::oriPacketForwardingStatus,INTEGER,read-write,,current,enable(1):disable(2),This object is used to enable or disable the Packet Forwarding 
.1.3.6.1.4.1.11898.2.1.5.7.2,ORiNOCO-MIB::oriPacketForwardingMACAddress,OCTET,read-write,,current,,This object represents the MAC Address to which all frames will be
.1.3.6.1.4.1.11898.2.1.5.7.3,ORiNOCO-MIB::oriPacketForwardingInterface,Integer32,read-write,,current,,This object is used to configure the interface or port that frames will be forwarded to. If this object is not configured, value set or port the MAC address was learned on. If this object is not configured, value set to zero, and the bridge has not yet learned the MAC address then the frames will be forwarded on all interfaces and  ports.
.1.3.6.1.4.1.11898.2.1.5.8,ORiNOCO-MIB::orinocoIBSSTraffic,,,,,,
.1.3.6.1.4.1.11898.2.1.5.8.1,ORiNOCO-MIB::oriIBSSTrafficOperation,INTEGER,read-write,,current,passthru(1):block(2),This object is used to control IntraBSS Traffic. If this object
.1.3.6.1.4.1.11898.2.1.6,ORiNOCO-MIB::orinocoRADIUS,,,,,,
.1.3.6.1.4.1.11898.2.1.6.1,ORiNOCO-MIB::orinocoRADIUSAuth,,,,,,
.1.3.6.1.4.1.11898.2.1.6.1.1,ORiNOCO-MIB::oriRADIUSAuthServerTable,,not-accessible,,current,,This table represents the RADIUS servers that the device will 
.1.3.6.1.4.1.11898.2.1.6.1.1.1,ORiNOCO-MIB::oriRADIUSAuthServerTableEntry,,not-accessible,oriRADIUSAuthServerTableIndex,current,,This object represents an entry in the RADIUS Authentication
.1.3.6.1.4.1.11898.2.1.6.1.1.1.1,ORiNOCO-MIB::oriRADIUSAuthServerTableIndex,Integer32,read-only,,current,,This object is used as an index to the RADIUS Authentication
.1.3.6.1.4.1.11898.2.1.6.1.1.1.2,ORiNOCO-MIB::oriRADIUSAuthServerType,INTEGER,read-only,,current,authentication(1):accounting(2):authAndAcct(3),This object indicates if the RADIUS server will provide 
.1.3.6.1.4.1.11898.2.1.6.1.1.1.3,ORiNOCO-MIB::oriRADIUSAuthServerTableEntryStatus,INTEGER,read-write,,current,enable(1):disable(2),This object identifies if the RADIUS server entry is enabled or
.1.3.6.1.4.1.11898.2.1.6.1.1.1.4,ORiNOCO-MIB::oriRADIUSAuthServerIPAddress,IpAddress,read-write,,deprecated,,This object represents the IP address of the RADIUS server.
.1.3.6.1.4.1.11898.2.1.6.1.1.1.5,ORiNOCO-MIB::oriRADIUSAuthServerDestPort,Integer32,read-write,,current,,This object represents the RADIUS server authentication port - 
.1.3.6.1.4.1.11898.2.1.6.1.1.1.6,ORiNOCO-MIB::oriRADIUSAuthServerSharedSecret,OCTET,read-write,,current,,This object represents the shared secret between the RADIUS 
.1.3.6.1.4.1.11898.2.1.6.1.1.1.7,ORiNOCO-MIB::oriRADIUSAuthServerResponseTime,Integer32,read-write,,current,,This object represents the time (in seconds) for which the 
.1.3.6.1.4.1.11898.2.1.6.1.1.1.8,ORiNOCO-MIB::oriRADIUSAuthServerMaximumRetransmission,Integer32,read-write,,current,,This object represents the number of retransmissions of 
.1.3.6.1.4.1.11898.2.1.6.1.1.1.9,ORiNOCO-MIB::oriRADIUSAuthClientAccessRequests,Counter32,read-only,,current,,This object represents the number of RADIUS Access Requests 
.1.3.6.1.4.1.11898.2.1.6.1.1.1.10,ORiNOCO-MIB::oriRADIUSAuthClientAccessRetransmissions,Counter32,read-only,,current,,This object represents the number of RADIUS Access Requests 
.1.3.6.1.4.1.11898.2.1.6.1.1.1.11,ORiNOCO-MIB::oriRADIUSAuthClientAccessAccepts,Counter32,read-only,,current,,This object indicates the number of RADIUS Access Accept messages 
.1.3.6.1.4.1.11898.2.1.6.1.1.1.12,ORiNOCO-MIB::oriRADIUSAuthClientAccessChallenges,Counter32,read-only,,current,,This object represents the number of RADIUS Access Challenges 
.1.3.6.1.4.1.11898.2.1.6.1.1.1.13,ORiNOCO-MIB::oriRADIUSAuthClientAccessRejects,Counter32,read-only,,current,,This object represents the number of RADIUS Access Rejects 
.1.3.6.1.4.1.11898.2.1.6.1.1.1.14,ORiNOCO-MIB::oriRADIUSAuthClientMalformedAccessResponses,Counter32,read-only,,current,,This object represents the number of malformed RADIUS Access 
.1.3.6.1.4.1.11898.2.1.6.1.1.1.15,ORiNOCO-MIB::oriRADIUSAuthClientAuthInvalidAuthenticators,Counter32,read-only,,current,,This object represents the number of malformed RADIUS Access 
.1.3.6.1.4.1.11898.2.1.6.1.1.1.16,ORiNOCO-MIB::oriRADIUSAuthClientTimeouts,Counter32,read-only,,current,,This object represents the total number of timeouts for RADIUS 
.1.3.6.1.4.1.11898.2.1.6.1.1.1.17,ORiNOCO-MIB::oriRADIUSAuthServerNameOrIPAddress,OCTET,read-write,,current,,This object is used to specify the RADIUS Server host name or
.1.3.6.1.4.1.11898.2.1.6.1.1.1.18,ORiNOCO-MIB::oriRADIUSAuthServerAddressingFormat,INTEGER,read-write,,current,ipAddress(1):name(2),This object is used to specify the addressing format for configuring
.1.3.6.1.4.1.11898.2.1.6.2,ORiNOCO-MIB::orinocoRADIUSAcct,,,,,,
.1.3.6.1.4.1.11898.2.1.6.2.1,ORiNOCO-MIB::oriRADIUSAcctStatus,INTEGER,read-write,,current,enable(1):disable(2),This object is used to enable or disable the RADIUS Accounting 
.1.3.6.1.4.1.11898.2.1.6.2.2,ORiNOCO-MIB::oriRADIUSAcctInactivityTimer,Integer32,read-write,,current,,This parameter represents the inactivity or idle timeout in 
.1.3.6.1.4.1.11898.2.1.6.2.3,ORiNOCO-MIB::oriRADIUSAcctServerTable,,not-accessible,,current,,This table represents the RADIUS servers that the device will 
.1.3.6.1.4.1.11898.2.1.6.2.3.1,ORiNOCO-MIB::oriRADIUSAcctServerTableEntry,,not-accessible,oriRADIUSAcctServerTableIndex,current,,This object represents an entry into the RADIUS Accouting
.1.3.6.1.4.1.11898.2.1.6.2.3.1.1,ORiNOCO-MIB::oriRADIUSAcctServerTableIndex,Integer32,read-only,,current,,This object is used as the index to the RADIUS Server Accounting
.1.3.6.1.4.1.11898.2.1.6.2.3.1.2,ORiNOCO-MIB::oriRADIUSAcctServerType,INTEGER,read-only,,current,authentication(1):accounting(2):authAndAcct(3),This object indicates if the RADIUS server will provide 
.1.3.6.1.4.1.11898.2.1.6.2.3.1.3,ORiNOCO-MIB::oriRADIUSAcctServerTableEntryStatus,INTEGER,read-write,,current,enable(1):disable(2),This object identifies if the RADIUS server entry is enabled or
.1.3.6.1.4.1.11898.2.1.6.2.3.1.4,ORiNOCO-MIB::oriRADIUSAcctServerIPAddress,IpAddress,read-write,,deprecated,,This object represents the IP address of the RADIUS server.
.1.3.6.1.4.1.11898.2.1.6.2.3.1.5,ORiNOCO-MIB::oriRADIUSAcctServerDestPort,Integer32,read-write,,current,,This object represents the RADIUS server accounting port - 
.1.3.6.1.4.1.11898.2.1.6.2.3.1.6,ORiNOCO-MIB::oriRADIUSAcctServerSharedSecret,OCTET,read-write,,current,,This object represents the shared secret between the RADIUS 
.1.3.6.1.4.1.11898.2.1.6.2.3.1.7,ORiNOCO-MIB::oriRADIUSAcctServerResponseTime,Integer32,read-write,,current,,This object represents the time (in seconds) for which the 
.1.3.6.1.4.1.11898.2.1.6.2.3.1.8,ORiNOCO-MIB::oriRADIUSAcctServerMaximumRetransmission,Integer32,read-write,,current,,This object represents the number of retransmissions of 
.1.3.6.1.4.1.11898.2.1.6.2.3.1.9,ORiNOCO-MIB::oriRADIUSAcctClientAccountingRequests,Counter32,read-only,,current,,This object represents the number of Accounting Requests messages 
.1.3.6.1.4.1.11898.2.1.6.2.3.1.10,ORiNOCO-MIB::oriRADIUSAcctClientAccountingRetransmissions,Counter32,read-only,,current,,This object represents the number of Accounting Requests 
.1.3.6.1.4.1.11898.2.1.6.2.3.1.11,ORiNOCO-MIB::oriRADIUSAcctClientAccountingResponses,Counter32,read-only,,current,,This object represents the number of Accounting Response messages 
.1.3.6.1.4.1.11898.2.1.6.2.3.1.12,ORiNOCO-MIB::oriRADIUSAcctClientAcctInvalidAuthenticators,Counter32,read-only,,current,,This object represents the number of Accounting Response 
.1.3.6.1.4.1.11898.2.1.6.2.3.1.13,ORiNOCO-MIB::oriRADIUSAcctServerNameOrIPAddress,OCTET,read-write,,current,,This object is used to specify the RADIUS Server host name or the
.1.3.6.1.4.1.11898.2.1.6.2.3.1.14,ORiNOCO-MIB::oriRADIUSAcctServerAddressingFormat,INTEGER,read-write,,current,ipAddress(1):name(2),This object is used to specify the addressing format for configuring
.1.3.6.1.4.1.11898.2.1.6.3,ORiNOCO-MIB::oriRADIUSClientInvalidServerAddress,Counter32,read-only,,current,,This counter represents the total number of RADIUS access-response
.1.3.6.1.4.1.11898.2.1.6.4,ORiNOCO-MIB::oriRADIUSMACAccessControl,INTEGER,read-write,,current,enable(1):disable(2),This object is used to enables RADIUS Access Control based on 
.1.3.6.1.4.1.11898.2.1.6.5,ORiNOCO-MIB::oriRADIUSAuthorizationLifeTime,Integer32,read-write,,current,,This object represents the authorization lifetime for a certain 
.1.3.6.1.4.1.11898.2.1.6.6,ORiNOCO-MIB::oriRADIUSMACAddressFormat,INTEGER,read-write,,current,dashDelimited(1):colonDelimited(2):singleDashDelimited(3):noDelimiter(4),This object is used to configure the MAC Address format that is to be  used for communication with the RADIUS Server. Examples of MAC Address Format are: - Dash Delimited: 00-11-22-AA-BB-CC - Colon Delimited: 00:11:22:AA:BB:CC - Single Dash Delimited: 001122-AABBCC - No Delimiter: 001122AABBCC
.1.3.6.1.4.1.11898.2.1.7,ORiNOCO-MIB::orinocoTelnet,,,,,,
.1.3.6.1.4.1.11898.2.1.7.1,ORiNOCO-MIB::oriTelnetSessions,Integer32,read-write,,deprecated,,This object is used to enable or disable telnet access and
.1.3.6.1.4.1.11898.2.1.7.2,ORiNOCO-MIB::oriTelnetPassword,OCTET,read-write,,current,,This object is the password to access the device via the telnet
.1.3.6.1.4.1.11898.2.1.7.3,ORiNOCO-MIB::oriTelnetPort,Integer32,read-write,,current,,This object represents the TCP/IP port for which the telnet 
.1.3.6.1.4.1.11898.2.1.7.4,ORiNOCO-MIB::oriTelnetLoginTimeout,Integer32,read-write,,current,,This object represents the telnet login timeout in seconds.
.1.3.6.1.4.1.11898.2.1.7.5,ORiNOCO-MIB::oriTelnetIdleTimeout,Integer32,read-write,,current,,This object represents the telnet inactivity/idle timeout in 
.1.3.6.1.4.1.11898.2.1.7.6,ORiNOCO-MIB::oriTelnetInterfaceBitmask,Integer32,read-write,,current,,This object is used to control interface access for telnet based 
.1.3.6.1.4.1.11898.2.1.8,ORiNOCO-MIB::orinocoTFTP,,,,,,
.1.3.6.1.4.1.11898.2.1.8.1,ORiNOCO-MIB::oriTFTPServerIPAddress,IpAddress,read-write,,current,,This object represents the IP address of the TFTP server.
.1.3.6.1.4.1.11898.2.1.8.2,ORiNOCO-MIB::oriTFTPFileName,OCTET,read-write,,current,,This object represents the filename to upload or download to the 
.1.3.6.1.4.1.11898.2.1.8.3,ORiNOCO-MIB::oriTFTPFileType,INTEGER,read-write,,current,config(1):image(2):bootloader(3):license(4),This object is used for the device to know what type of file is
.1.3.6.1.4.1.11898.2.1.8.4,ORiNOCO-MIB::oriTFTPOperation,INTEGER,read-write,,current,upload(1):download(2):downloadAndReboot(3),This object represents the TFTP operation to be executed. The
.1.3.6.1.4.1.11898.2.1.8.5,ORiNOCO-MIB::oriTFTPFileMode,INTEGER,read-write,,current,ascii(1):bin(2),This objects represents the file transfer mode for the TFTP
.1.3.6.1.4.1.11898.2.1.8.6,ORiNOCO-MIB::oriTFTPOperationStatus,INTEGER,read-only,,current,idle(1):inProgress(2):successful(3):failure(4),This object represents the TFTP operation status. When a TFTP
.1.3.6.1.4.1.11898.2.1.9,ORiNOCO-MIB::orinocoSerial,,,,,,
.1.3.6.1.4.1.11898.2.1.9.1,ORiNOCO-MIB::oriSerialBaudRate,INTEGER,read-write,,current,baud2400(1):baud4800(2):baud9600(3):baud19200(4):baud38400(5):baud57600(6),This object represents the baud rate for the serial interface -
.1.3.6.1.4.1.11898.2.1.9.2,ORiNOCO-MIB::oriSerialDataBits,Integer32,read-only,,current,,This object represents the serial interface data bits - the 
.1.3.6.1.4.1.11898.2.1.9.3,ORiNOCO-MIB::oriSerialParity,INTEGER,read-only,,current,even(1):odd(2):none(3):mark(4):space(5),This object is used for the serial interface parity check - the
.1.3.6.1.4.1.11898.2.1.9.4,ORiNOCO-MIB::oriSerialStopBits,INTEGER,read-only,,current,bit1(1):bit1dot5(2):bit2(3),This object indicates the serial interface stop bits - the 
.1.3.6.1.4.1.11898.2.1.9.5,ORiNOCO-MIB::oriSerialFlowControl,INTEGER,read-write,,current,xonxoff(1):none(2),This object is used for the serial interface flow control - the
.1.3.6.1.4.1.11898.2.1.10,ORiNOCO-MIB::orinocoIAPP,,,,,,
.1.3.6.1.4.1.11898.2.1.10.1,ORiNOCO-MIB::oriIAPPStatus,INTEGER,read-write,,current,enable(1):disable(2),This object is used to enable or disable the IAPP feature.
.1.3.6.1.4.1.11898.2.1.10.2,ORiNOCO-MIB::oriIAPPPeriodicAnnounceInterval,INTEGER,read-write,,current,eighty(80):oneHundredTwenty(120):oneHundredSixty(160):twoHundred(200),This object represents interval in seconds for performing an 
.1.3.6.1.4.1.11898.2.1.10.3,ORiNOCO-MIB::oriIAPPAnnounceResponseTime,Integer32,read-only,,current,,This object indicates the amount of time in seconds the 
.1.3.6.1.4.1.11898.2.1.10.4,ORiNOCO-MIB::oriIAPPHandoverTimeout,INTEGER,read-write,,current,fourHundredTen(410):fiveHundredTwelve(512):sixHundredFourteen(614):sevenHundredSeventeen(717):eightHundredNineteen(819),This object represents the time in milliseconds the device 
.1.3.6.1.4.1.11898.2.1.10.5,ORiNOCO-MIB::oriIAPPMaximumHandoverRetransmissions,Integer32,read-write,,current,,This object indicates the maximum amount of retransmission sent
.1.3.6.1.4.1.11898.2.1.10.6,ORiNOCO-MIB::oriIAPPAnnounceRequestSent,Counter32,read-only,,current,,This object represents the total number of IAPP Announce 
.1.3.6.1.4.1.11898.2.1.10.7,ORiNOCO-MIB::oriIAPPAnnounceRequestReceived,Counter32,read-only,,current,,This object represents the total number of IAPP Announce 
.1.3.6.1.4.1.11898.2.1.10.8,ORiNOCO-MIB::oriIAPPAnnounceResponseSent,Counter32,read-only,,current,,This object represents the total number of IAPP Announce 
.1.3.6.1.4.1.11898.2.1.10.9,ORiNOCO-MIB::oriIAPPAnnounceResponseReceived,Counter32,read-only,,current,,This object represents the total number of IAPP Announce 
.1.3.6.1.4.1.11898.2.1.10.10,ORiNOCO-MIB::oriIAPPHandoverRequestSent,Counter32,read-only,,current,,This object represents the total number of IAPP Handover 
.1.3.6.1.4.1.11898.2.1.10.11,ORiNOCO-MIB::oriIAPPHandoverRequestReceived,Counter32,read-only,,current,,This object represents the total number of IAPP Handover 
.1.3.6.1.4.1.11898.2.1.10.12,ORiNOCO-MIB::oriIAPPHandoverRequestRetransmissions,Counter32,read-only,,current,,This object represents the total number of IAPP Handover 
.1.3.6.1.4.1.11898.2.1.10.13,ORiNOCO-MIB::oriIAPPHandoverResponseSent,Counter32,read-only,,current,,This object represents the total number of IAPP Handover 
.1.3.6.1.4.1.11898.2.1.10.14,ORiNOCO-MIB::oriIAPPHandoverResponseReceived,Counter32,read-only,,current,,This object represents the total number of IAPP Handover 
.1.3.6.1.4.1.11898.2.1.10.15,ORiNOCO-MIB::oriIAPPPDUsDropped,Counter32,read-only,,current,,This object represents the total number of IAPP packets dropped
.1.3.6.1.4.1.11898.2.1.10.16,ORiNOCO-MIB::oriIAPPRoamingClients,Counter32,read-only,,current,,This object represents the total number of client that have 
.1.3.6.1.4.1.11898.2.1.10.17,ORiNOCO-MIB::oriIAPPTerminatePPPSessionPDUsSent,Counter32,read-only,,current,,This object represents a count of the terminate PPP Session PDUs
.1.3.6.1.4.1.11898.2.1.10.18,ORiNOCO-MIB::oriIAPPTerminatePPPSessionPDUsReceived,Counter32,read-only,,current,,This object represents a count of the terminate PPP Session PDUs
.1.3.6.1.4.1.11898.2.1.10.19,ORiNOCO-MIB::oriIAPPTerminatePPPSessionACKsSent,Counter32,read-only,,current,,This object represents the number of terminate PPP Session 
.1.3.6.1.4.1.11898.2.1.10.20,ORiNOCO-MIB::oriIAPPTerminatePPPSessionACKsReceived,Counter32,read-only,,current,,This object represents the number of terminate PPP Session 
.1.3.6.1.4.1.11898.2.1.10.21,ORiNOCO-MIB::oriIAPPMACIPTable,,not-accessible,,current,,This table contains a list of devices on the network that support IAPP and have the feature enabled.
.1.3.6.1.4.1.11898.2.1.10.21.1,ORiNOCO-MIB::oriIAPPMACIPTableEntry,,not-accessible,oriIAPPMACIPTableIndex,current,,This object represents an entry in the IAPP table, which  essentially is a device that supports IAPP and has the feature enabled.
.1.3.6.1.4.1.11898.2.1.10.21.1.1,ORiNOCO-MIB::oriIAPPMACIPTableIndex,Integer32,read-only,,current,,This object is used as the index for the IAPP MAC-IP table.
.1.3.6.1.4.1.11898.2.1.10.21.1.2,ORiNOCO-MIB::oriIAPPMACIPTableSystemName,OCTET,read-only,,current,,This object represents the System Name of the IAPP enabled 
.1.3.6.1.4.1.11898.2.1.10.21.1.3,ORiNOCO-MIB::oriIAPPMACIPTableIPAddress,IpAddress,read-only,,current,,This object represents the IP Address of the IAPP enabled device.
.1.3.6.1.4.1.11898.2.1.10.21.1.4,ORiNOCO-MIB::oriIAPPMACIPTableBSSID,OCTET,read-only,,current,,This object represents the BSSID (MAC address of wireless  interface) of the IAPP enabled device.
.1.3.6.1.4.1.11898.2.1.10.21.1.5,ORiNOCO-MIB::oriIAPPMACIPTableESSID,OCTET,read-only,,current,,This object represents the ESSID (network name) of the IAPP  enabled device.
.1.3.6.1.4.1.11898.2.1.10.22,ORiNOCO-MIB::oriIAPPSendAnnounceRequestOnStart,INTEGER,read-write,,current,enable(1):disable(2),This object is used to determine whether to send announce request
.1.3.6.1.4.1.11898.2.1.11,ORiNOCO-MIB::orinocoLinkTest,,,,,,
.1.3.6.1.4.1.11898.2.1.11.1,ORiNOCO-MIB::oriLinkTestTimeOut,Integer32,read-write,,current,,The value of this object determines the time (in seconds) that a 
.1.3.6.1.4.1.11898.2.1.11.3,ORiNOCO-MIB::oriLinkTestInterval,Integer32,read-write,,current,,This object indicates the interval (in milliseconds) between 
.1.3.6.1.4.1.11898.2.1.11.4,ORiNOCO-MIB::oriLinkTestExplore,INTEGER,read-write,,current,tableTimedOut(1):exploring(2):exploreResultsAvailable(3),When this object is set to 2, the device will send out an explore 
.1.3.6.1.4.1.11898.2.1.11.5,ORiNOCO-MIB::oriLinkTestTable,,not-accessible,,current,,This table contains the information for the stations currently 
.1.3.6.1.4.1.11898.2.1.11.5.1,ORiNOCO-MIB::oriLinkTestTableEntry,,not-accessible,oriLinkTestTableIndex,current,,This object represents the entry in the Remote Link Test table.
.1.3.6.1.4.1.11898.2.1.11.5.1.1,ORiNOCO-MIB::oriLinkTestTableIndex,Integer32,read-only,,current,,This object represents a unique value for each station. The 
.1.3.6.1.4.1.11898.2.1.11.5.1.2,ORiNOCO-MIB::oriLinkTestInProgress,INTEGER,read-write,,current,noLinkTestInProgress(1):linkTestIinProgress(2),When this object is set to 2 the device will initiate a link test 
.1.3.6.1.4.1.11898.2.1.11.5.1.3,ORiNOCO-MIB::oriLinkTestStationName,OCTET,read-only,,current,,This object identifies the name of the station whom which the 
.1.3.6.1.4.1.11898.2.1.11.5.1.4,ORiNOCO-MIB::oriLinkTestMACAddress,OCTET,read-only,,current,,This object represents the MAC address that will be mapped to 
.1.3.6.1.4.1.11898.2.1.11.5.1.5,ORiNOCO-MIB::oriLinkTestStationProfile,Integer32,read-only,,current,,This object represents the profile/capabilities for this station.
.1.3.6.1.4.1.11898.2.1.11.5.1.6,ORiNOCO-MIB::oriLinkTestOurCurSignalLevel,Integer32,read-only,,current,,The current signal level (in dB) for the link test from this 
.1.3.6.1.4.1.11898.2.1.11.5.1.7,ORiNOCO-MIB::oriLinkTestOurCurNoiseLevel,Integer32,read-only,,current,,The current noise level (in dB) for the link test to this station. 
.1.3.6.1.4.1.11898.2.1.11.5.1.8,ORiNOCO-MIB::oriLinkTestOurCurSNR,Integer32,read-only,,current,,The current signal to noise ratio for the link test to this 
.1.3.6.1.4.1.11898.2.1.11.5.1.9,ORiNOCO-MIB::oriLinkTestOurMinSignalLevel,Integer32,read-only,,current,,The minimum signal level during the link test to this station.
.1.3.6.1.4.1.11898.2.1.11.5.1.10,ORiNOCO-MIB::oriLinkTestOurMinNoiseLevel,Integer32,read-only,,current,,The minimum noise level during the link test to this station.
.1.3.6.1.4.1.11898.2.1.11.5.1.11,ORiNOCO-MIB::oriLinkTestOurMinSNR,Integer32,read-only,,current,,The minimum signal to noise ratio during the link test to this 
.1.3.6.1.4.1.11898.2.1.11.5.1.12,ORiNOCO-MIB::oriLinkTestOurMaxSignalLevel,Integer32,read-only,,current,,The maximum signal level during the link test to this station.
.1.3.6.1.4.1.11898.2.1.11.5.1.13,ORiNOCO-MIB::oriLinkTestOurMaxNoiseLevel,Integer32,read-only,,current,,The maximum noise level during the link test to this station.
.1.3.6.1.4.1.11898.2.1.11.5.1.14,ORiNOCO-MIB::oriLinkTestOurMaxSNR,Integer32,read-only,,current,,The maximum signal to noise ratio during the link test to this 
.1.3.6.1.4.1.11898.2.1.11.5.1.15,ORiNOCO-MIB::oriLinkTestOurLowFrameCount,Integer32,read-only,,current,,The total number of frames sent at 1 Mbit/s speed during the link 
.1.3.6.1.4.1.11898.2.1.11.5.1.16,ORiNOCO-MIB::oriLinkTestOurStandardFrameCount,Integer32,read-only,,current,,The total number of frames sent at 2 Mbit/s speed during the link 
.1.3.6.1.4.1.11898.2.1.11.5.1.17,ORiNOCO-MIB::oriLinkTestOurMediumFrameCount,Integer32,read-only,,current,,The total number of frames sent at 5.5 Mbit/s (for Turbo-8, it is 
.1.3.6.1.4.1.11898.2.1.11.5.1.18,ORiNOCO-MIB::oriLinkTestOurHighFrameCount,Integer32,read-only,,current,,The total number of frames sent at 11 Mbit/s (for Turbo-8, it is 
.1.3.6.1.4.1.11898.2.1.11.5.1.19,ORiNOCO-MIB::oriLinkTestHisCurSignalLevel,Integer32,read-only,,current,,The current signal level for the link test to the remote station 
.1.3.6.1.4.1.11898.2.1.11.5.1.20,ORiNOCO-MIB::oriLinkTestHisCurNoiseLevel,Integer32,read-only,,current,,The current noise level for the link test to the remote station
.1.3.6.1.4.1.11898.2.1.11.5.1.21,ORiNOCO-MIB::oriLinkTestHisCurSNR,Integer32,read-only,,current,,The current signal to noise ratio for the link test to the remote 
.1.3.6.1.4.1.11898.2.1.11.5.1.22,ORiNOCO-MIB::oriLinkTestHisMinSignalLevel,Integer32,read-only,,current,,The minimum signal level during the link test to the remote station
.1.3.6.1.4.1.11898.2.1.11.5.1.23,ORiNOCO-MIB::oriLinkTestHisMinNoiseLevel,Integer32,read-only,,current,,The minimum noise level during the link test to the remote station 
.1.3.6.1.4.1.11898.2.1.11.5.1.24,ORiNOCO-MIB::oriLinkTestHisMinSNR,Integer32,read-only,,current,,The minimum signal to noise ratio during the link test to the 
.1.3.6.1.4.1.11898.2.1.11.5.1.25,ORiNOCO-MIB::oriLinkTestHisMaxSignalLevel,Integer32,read-only,,current,,The maximum signal level during the link test to the remote 
.1.3.6.1.4.1.11898.2.1.11.5.1.26,ORiNOCO-MIB::oriLinkTestHisMaxNoiseLevel,Integer32,read-only,,current,,The maximum noise level during the link test to the remote station 
.1.3.6.1.4.1.11898.2.1.11.5.1.27,ORiNOCO-MIB::oriLinkTestHisMaxSNR,Integer32,read-only,,current,,The maximum signal to noise ratio during the link test to the 
.1.3.6.1.4.1.11898.2.1.11.5.1.28,ORiNOCO-MIB::oriLinkTestHisLowFrameCount,Integer32,read-only,,current,,The total number of frames sent at 1 Mbit/s speed during the link 
.1.3.6.1.4.1.11898.2.1.11.5.1.29,ORiNOCO-MIB::oriLinkTestHisStandardFrameCount,Integer32,read-only,,current,,The total number of frames sent at 2 Mbit/s speed during the link 
.1.3.6.1.4.1.11898.2.1.11.5.1.30,ORiNOCO-MIB::oriLinkTestHisMediumFrameCount,Integer32,read-only,,current,,The total number of frames sent at 5.5 Mbit/s (for Turbo-8, it is 
.1.3.6.1.4.1.11898.2.1.11.5.1.31,ORiNOCO-MIB::oriLinkTestHisHighFrameCount,Integer32,read-only,,current,,The total number of frames sent at 11 Mbit/s (for Turbo-8, it is 
.1.3.6.1.4.1.11898.2.1.11.5.1.32,ORiNOCO-MIB::oriLinkTestInterface,OCTET,read-only,,current,,This object represents the wireless interface number to which the  Client has sent the Explore Response Message.
.1.3.6.1.4.1.11898.2.1.11.5.1.33,ORiNOCO-MIB::oriLinkTestRadioType,OCTET,read-only,,current,,The Wireless Standard eg. IEEE 802.11 or IEEE 802.11b being used
.1.3.6.1.4.1.11898.2.1.12,ORiNOCO-MIB::orinocoLinkInt,,,,,,
.1.3.6.1.4.1.11898.2.1.12.1,ORiNOCO-MIB::oriLinkIntStatus,INTEGER,read-write,,current,enable(1):disable(2),This object is used to enable or disable the link integrity 
.1.3.6.1.4.1.11898.2.1.12.2,ORiNOCO-MIB::oriLinkIntPollInterval,Integer32,read-write,,current,,This object is used to set the poll interval (in milliseconds) 
.1.3.6.1.4.1.11898.2.1.12.3,ORiNOCO-MIB::oriLinkIntPollRetransmissions,Integer32,read-write,,current,,This object is used to set the number of retransmissions for 
.1.3.6.1.4.1.11898.2.1.12.4,ORiNOCO-MIB::oriLinkIntTable,,not-accessible,,current,,This table contains the target IP addresses in order to perform 
.1.3.6.1.4.1.11898.2.1.12.4.1,ORiNOCO-MIB::oriLinkIntTableEntry,,not-accessible,oriLinkIntTableIndex,current,,This object identifies the entry in the link integrity target 
.1.3.6.1.4.1.11898.2.1.12.4.1.1,ORiNOCO-MIB::oriLinkIntTableIndex,Integer32,read-only,,current,,This object is used as an index for the link integrity target 
.1.3.6.1.4.1.11898.2.1.12.4.1.2,ORiNOCO-MIB::oriLinkIntTableTargetIPAddress,IpAddress,read-write,,current,,This object represents the IP address of the target machine for
.1.3.6.1.4.1.11898.2.1.12.4.1.3,ORiNOCO-MIB::oriLinkIntTableComment,OCTET,read-write,,current,,This object is used as an optional comment associated to the 
.1.3.6.1.4.1.11898.2.1.12.4.1.4,ORiNOCO-MIB::oriLinkIntTableEntryStatus,INTEGER,read-write,,current,enable(1):disable(2):delete(3):create(4),This object is used to enable, disable, delete, or create an 
.1.3.6.1.4.1.11898.2.1.13,ORiNOCO-MIB::orinocoECP,,,,,,
.1.3.6.1.4.1.11898.2.1.13.1,ORiNOCO-MIB::oriECPRetransmissionCount,Integer32,read-write,,current,,This object represents the number of retransmissions when 
.1.3.6.1.4.1.11898.2.1.13.2,ORiNOCO-MIB::oriECPResponseRetransmissions,Integer32,read-write,,current,,This object represents the number of times the transmitted 
.1.3.6.1.4.1.11898.2.1.13.3,ORiNOCO-MIB::oriECPResponseRetransmissionTimeout,Integer32,read-write,,current,,This object represents the timeout interval for a response to be
.1.3.6.1.4.1.11898.2.1.14,ORiNOCO-MIB::orinocoPPP,,,,,,
.1.3.6.1.4.1.11898.2.1.14.1,ORiNOCO-MIB::oriPPPIPAddressAssignmentType,INTEGER,read-write,,current,local(1):dhcpRelay(2):radius(3),This object identifies whether the IP addresses assigned to the 
.1.3.6.1.4.1.11898.2.1.14.2,ORiNOCO-MIB::oriPPPMACtoIPMappingCount,Integer32,read-only,,current,,This object represents the number of MAC address to IP address 
.1.3.6.1.4.1.11898.2.1.14.3,ORiNOCO-MIB::oriPPPMACtoIPMappingTable,,not-accessible,,current,,This table contains the static mapping of MAC addresses to IP 
.1.3.6.1.4.1.11898.2.1.14.3.1,ORiNOCO-MIB::oriPPPMACtoIPMappingTableEntry,,not-accessible,oriPPPMACtoIPTableIndex,current,,This object represents the entry of the MAC to IP Address mapping 
.1.3.6.1.4.1.11898.2.1.14.3.1.1,ORiNOCO-MIB::oriPPPMACtoIPTableIndex,Integer32,read-only,,current,,This object represents the index to the IP to MAC address 
.1.3.6.1.4.1.11898.2.1.14.3.1.2,ORiNOCO-MIB::oriPPPMACtoIPTableMACAddress,OCTET,read-write,,current,,This object represents the MAC address that will be mapped to 
.1.3.6.1.4.1.11898.2.1.14.3.1.3,ORiNOCO-MIB::oriPPPMACtoIPTableIPAddress,IpAddress,read-write,,current,,This objects identifies IP address corresponding to the MAC 
.1.3.6.1.4.1.11898.2.1.14.3.1.4,ORiNOCO-MIB::oriPPPMACtoIPTableComment,OCTET,read-write,,current,,The object represents the comment for this entry.
.1.3.6.1.4.1.11898.2.1.14.3.1.5,ORiNOCO-MIB::oriPPPMACtoIPTableEntryStatus,INTEGER,read-write,,current,enable(1):disable(2):delete(3):create(4),This object is used to enable, disable, delete, create the 
.1.3.6.1.4.1.11898.2.1.14.4,ORiNOCO-MIB::oriPPPKeepAliveInterval,Integer32,read-write,,current,,This object represents the keep alive interval to be notified to
.1.3.6.1.4.1.11898.2.1.14.5,ORiNOCO-MIB::oriPPPNumKeepAliveTimeouts,Integer32,read-write,,current,,This object represents the maximum number of timeouts before the 
.1.3.6.1.4.1.11898.2.1.14.6,ORiNOCO-MIB::oriPPPSessionIdleTimeout,Integer32,read-only,,current,,This object indicates the idle timeout (in seconds) in order to 
.1.3.6.1.4.1.11898.2.1.14.7,ORiNOCO-MIB::oriPPPPrimaryDNSIPAddress,IpAddress,read-write,,current,,This object represents the IP address of the primary DNS server 
.1.3.6.1.4.1.11898.2.1.14.8,ORiNOCO-MIB::oriPPPSecondaryDNSIPAddress,IpAddress,read-write,,current,,This object represents the IP address of the secondary DNS server 
.1.3.6.1.4.1.11898.2.1.14.9,ORiNOCO-MIB::oriPPPMaxNumberOfUsers,Integer32,read-write,,current,,This object represents the number of user allowed to connect to 
.1.3.6.1.4.1.11898.2.1.14.10,ORiNOCO-MIB::oriPPPIPPoolTableEntries,Integer32,read-only,,current,,This object represents the number of entries in the PPP IP 
.1.3.6.1.4.1.11898.2.1.14.11,ORiNOCO-MIB::oriPPPCHAPStatus,INTEGER,read-write,,current,enable(1):disable(2),This object indicates the status of CHAP in the device.
.1.3.6.1.4.1.11898.2.1.14.12,ORiNOCO-MIB::oriPPPCHAPPriority,Integer32,read-write,,current,,This object indicates the priority of CHAP among all 
.1.3.6.1.4.1.11898.2.1.14.13,ORiNOCO-MIB::oriPPPPAPStatus,INTEGER,read-write,,current,enable(1):disable(2),This object indicates the status of PAP in the device.
.1.3.6.1.4.1.11898.2.1.14.14,ORiNOCO-MIB::oriPPPPAPPriority,Integer32,read-write,,current,,This object indicates the priority of PAP among all 
.1.3.6.1.4.1.11898.2.1.14.15,ORiNOCO-MIB::oriPPPPrimaryWINSIPAddress,IpAddress,read-write,,current,,This object represents the IP address of the Primary WINS/NBNS 
.1.3.6.1.4.1.11898.2.1.14.16,ORiNOCO-MIB::oriPPPSecondaryWINSIPAddress,IpAddress,read-write,,current,,This object represents the IP address of the Secondary WINS/NBNS 
.1.3.6.1.4.1.11898.2.1.14.17,ORiNOCO-MIB::oriPPPIPPoolTable,,not-accessible,,current,,This table is used for configuring IP address pools to be assinged
.1.3.6.1.4.1.11898.2.1.14.17.1,ORiNOCO-MIB::oriPPPIPPoolTableEntry,,not-accessible,oriPPPIPPoolTableIndex,current,,This object represents an in entry the oriPPPIPPoolTable.
.1.3.6.1.4.1.11898.2.1.14.17.1.1,ORiNOCO-MIB::oriPPPIPPoolTableIndex,Integer32,read-only,,current,,This object is used as an index for the PPP IP Pool table.
.1.3.6.1.4.1.11898.2.1.14.17.1.2,ORiNOCO-MIB::oriPPPIPPoolTableStartIPAddress,IpAddress,read-write,,current,,This object represents the start IP address for the IP Pool.
.1.3.6.1.4.1.11898.2.1.14.17.1.3,ORiNOCO-MIB::oriPPPIPPoolTableEndIPAddress,IpAddress,read-write,,current,,This object represents the end IP address for the IP Pool.
.1.3.6.1.4.1.11898.2.1.14.17.1.4,ORiNOCO-MIB::oriPPPIPPoolTableWidth,Integer32,read-write,,current,,This object represents the width of the IP Pool.
.1.3.6.1.4.1.11898.2.1.14.17.1.5,ORiNOCO-MIB::oriPPPIPPoolTableComment,OCTET,read-write,,current,,The object represents an optional comment for the IP Pool.
.1.3.6.1.4.1.11898.2.1.14.17.1.6,ORiNOCO-MIB::oriPPPIPPoolTableEntryStatus,INTEGER,read-write,,current,enable(1):disable(2):delete(3):create(4),This object represents the status of the entry, whether to be 
.1.3.6.1.4.1.11898.2.1.15,ORiNOCO-MIB::orinocoDHCP,,,,,,
.1.3.6.1.4.1.11898.2.1.15.1,ORiNOCO-MIB::orinocoDHCPServer,,,,,,
.1.3.6.1.4.1.11898.2.1.15.1.1,ORiNOCO-MIB::oriDHCPServerStatus,INTEGER,read-write,,current,enable(1):disable(2),This object indicates if the DHCP server is enabled or disabled
.1.3.6.1.4.1.11898.2.1.15.1.2,ORiNOCO-MIB::oriDHCPServerIPPoolTable,,not-accessible,,current,,This table contains the pools of IP Addresses that the DHCP server 
.1.3.6.1.4.1.11898.2.1.15.1.2.1,ORiNOCO-MIB::oriDHCPServerIPPoolTableEntry,,not-accessible,oriDHCPServerIPPoolTableIndex,current,,This object represents entries in the DHCP IP Address Pool Table.
.1.3.6.1.4.1.11898.2.1.15.1.2.1.1,ORiNOCO-MIB::oriDHCPServerIPPoolTableIndex,Integer32,read-only,,current,,This object is used as the index for the IP Address Pool table.
.1.3.6.1.4.1.11898.2.1.15.1.2.1.2,ORiNOCO-MIB::oriDHCPServerIPPoolTableStartIPAddress,IpAddress,read-write,,current,,This object represents the start IP address for this DHCP IP 
.1.3.6.1.4.1.11898.2.1.15.1.2.1.3,ORiNOCO-MIB::oriDHCPServerIPPoolTableEndIPAddress,IpAddress,read-write,,current,,This object represents the end IP address for this DHCP IP  Address IP Pool Table entry.
.1.3.6.1.4.1.11898.2.1.15.1.2.1.4,ORiNOCO-MIB::oriDHCPServerIPPoolTableWidth,Integer32,read-write,,current,,This object represents the width or number of IP Address in the 
.1.3.6.1.4.1.11898.2.1.15.1.2.1.5,ORiNOCO-MIB::oriDHCPServerIPPoolTableDefaultLeaseTime,Integer32,read-write,,current,,This object represents the default lease time, in seconds, for 
.1.3.6.1.4.1.11898.2.1.15.1.2.1.6,ORiNOCO-MIB::oriDHCPServerIPPoolTableMaximumLeaseTime,Integer32,read-write,,current,,This object represents the maximum lease time in seconds for 
.1.3.6.1.4.1.11898.2.1.15.1.2.1.7,ORiNOCO-MIB::oriDHCPServerIPPoolTableComment,OCTET,read-write,,current,,This object represents an optional comment for this table entry.
.1.3.6.1.4.1.11898.2.1.15.1.2.1.8,ORiNOCO-MIB::oriDHCPServerIPPoolTableEntryStatus,INTEGER,read-write,,current,enable(1):disable(2):delete(3):create(4),The object indicates the status of the DHCP IP Address Pool 
.1.3.6.1.4.1.11898.2.1.15.1.3,ORiNOCO-MIB::oriDHCPServerDefaultGatewayIPAddress,IpAddress,read-write,,current,,This object represents the IP Address of the gateway or router 
.1.3.6.1.4.1.11898.2.1.15.1.4,ORiNOCO-MIB::oriDHCPServerSubnetMask,IpAddress,read-only,,current,,This object represents the subnet mask to be provided to  DHCP clients. This object is the same as the subnet mask for the device.
.1.3.6.1.4.1.11898.2.1.15.1.5,ORiNOCO-MIB::oriDHCPServerNumIPPoolTableEntries,Integer32,read-only,,current,,This object represents the number of entries in the DHCP IP 
.1.3.6.1.4.1.11898.2.1.15.1.6,ORiNOCO-MIB::oriDHCPServerPrimaryDNSIPAddress,IpAddress,read-write,,current,,This object represents the primary DNS Server IP Address to be
.1.3.6.1.4.1.11898.2.1.15.1.7,ORiNOCO-MIB::oriDHCPServerSecondaryDNSIPAddress,IpAddress,read-write,,current,,This object represents the secondary DNS Server IP Address to be
.1.3.6.1.4.1.11898.2.1.15.2,ORiNOCO-MIB::orinocoDHCPClient,,,,,,
.1.3.6.1.4.1.11898.2.1.15.2.1,ORiNOCO-MIB::oriDHCPClientID,OCTET,read-write,,current,,This object represents the DHCP client ID.
.1.3.6.1.4.1.11898.2.1.15.2.2,ORiNOCO-MIB::oriDHCPClientInterfaceBitmask,Integer32,read-write,,current,,This object indicates to which interface a DHCP Request  in sent when the unit is in routing mode
.1.3.6.1.4.1.11898.2.1.15.3,ORiNOCO-MIB::orinocoDHCPRelay,,,,,,
.1.3.6.1.4.1.11898.2.1.15.3.1,ORiNOCO-MIB::oriDHCPRelayStatus,INTEGER,read-write,,current,enable(1):disable(2),This object is used to enable and disable the DHCP Relay 
.1.3.6.1.4.1.11898.2.1.15.3.2,ORiNOCO-MIB::oriDHCPRelayDHCPServerTable,,not-accessible,,current,,This table contains a list of DHCP servers to which the
.1.3.6.1.4.1.11898.2.1.15.3.2.1,ORiNOCO-MIB::oriDHCPRelayDHCPServerTableEntry,,not-accessible,oriDHCPRelayDHCPServerTableIndex,current,,This object represents and entry in the DHCP Server table.
.1.3.6.1.4.1.11898.2.1.15.3.2.1.1,ORiNOCO-MIB::oriDHCPRelayDHCPServerTableIndex,Integer32,read-only,,current,,This object is used as the index to this table. This table is 
.1.3.6.1.4.1.11898.2.1.15.3.2.1.2,ORiNOCO-MIB::oriDHCPRelayDHCPServerTableIpAddress,IpAddress,read-write,,current,,This object represents the IP address of the DHCP server
.1.3.6.1.4.1.11898.2.1.15.3.2.1.3,ORiNOCO-MIB::oriDHCPRelayDHCPServerTableComment,OCTET,read-write,,current,,This object represents an optional comment in order to provide
.1.3.6.1.4.1.11898.2.1.15.3.2.1.4,ORiNOCO-MIB::oriDHCPRelayDHCPServerTableEntryStatus,INTEGER,read-write,,current,enable(1):disable(2):delete(3):create(4),This object is used to enable, disable, delete or create an 
.1.3.6.1.4.1.11898.2.1.16,ORiNOCO-MIB::orinocoHTTP,,,,,,
.1.3.6.1.4.1.11898.2.1.16.1,ORiNOCO-MIB::oriHTTPInterfaceBitmask,Integer32,read-write,,current,,This object is used to control interface access for HTTP based 
.1.3.6.1.4.1.11898.2.1.16.2,ORiNOCO-MIB::oriHTTPPassword,OCTET,read-write,,current,,This object represents the login password in order to manage 
.1.3.6.1.4.1.11898.2.1.16.3,ORiNOCO-MIB::oriHTTPPort,Integer32,read-write,,current,,This object represents the TCP/IP port by which the HTTP server 
.1.3.6.1.4.1.11898.2.1.16.4,ORiNOCO-MIB::oriHTTPWebSitenameTable,,not-accessible,,current,,This table is used to store the different website interfaces  stored in the device. Different interfaces can be used to  support multiple languages, user levels (novice, expert), etc.
.1.3.6.1.4.1.11898.2.1.16.4.1,ORiNOCO-MIB::oriHTTPWebSitenameTableEntry,,not-accessible,oriHTTPWebSitenameTableIndex,current,,This object represents an entry is the HTTP website name table.
.1.3.6.1.4.1.11898.2.1.16.4.1.1,ORiNOCO-MIB::oriHTTPWebSitenameTableIndex,Integer32,read-only,,current,,This objects represents the index to the website interface table.
.1.3.6.1.4.1.11898.2.1.16.4.1.2,ORiNOCO-MIB::oriHTTPWebSiteFilename,OCTET,read-only,,current,,This object represents the filename under which the website interface is stored in the device.
.1.3.6.1.4.1.11898.2.1.16.4.1.3,ORiNOCO-MIB::oriHTTPWebSiteLanguage,OCTET,read-only,,current,,This object represents the language of the website interface.
.1.3.6.1.4.1.11898.2.1.16.4.1.4,ORiNOCO-MIB::oriHTTPWebSiteDescription,OCTET,read-only,,current,,This object provides a description for the website interface.
.1.3.6.1.4.1.11898.2.1.16.4.1.5,ORiNOCO-MIB::oriHTTPWebSitenameTableStatus,INTEGER,read-write,,current,enable(1):disable(2):delete(3),This object is used to enable, disable, or delete a website 
.1.3.6.1.4.1.11898.2.1.16.5,ORiNOCO-MIB::oriHTTPRefreshDelay,Integer32,read-write,,current,,This object is used for the automatic refresh delay for the 
.1.3.6.1.4.1.11898.2.1.16.6,ORiNOCO-MIB::oriHTTPHelpInformationLink,OCTET,read-write,,current,,This object is used to configure the link in the web
.1.3.6.1.4.1.11898.2.1.16.9,ORiNOCO-MIB::oriHTTPSetupWizardStatus,INTEGER,read-write,,current,enable(1):disable(2),This object is used to enable or disable the HTT setup wizard. The user can manually disable this functionality or when the setup wizard completes it process successfully it sets this object to disable.
.1.3.6.1.4.1.11898.2.1.17,ORiNOCO-MIB::orinocoWDS,,,,,,
.1.3.6.1.4.1.11898.2.1.17.1,ORiNOCO-MIB::oriWDSSetupTable,,not-accessible,,current,,This table is used in to configure the WDS feature in the device.
.1.3.6.1.4.1.11898.2.1.17.1.1,ORiNOCO-MIB::oriWDSSetupTableEntry,,not-accessible,ifIndex:oriWDSSetupTablePortIndex,current,,This object represents an entry in the WDS table. Note this table is index by ifIndex and WDS table index.
.1.3.6.1.4.1.11898.2.1.17.1.1.1,ORiNOCO-MIB::oriWDSSetupTablePortIndex,Integer32,read-only,,current,,This object represents the WDS port number.
.1.3.6.1.4.1.11898.2.1.17.1.1.2,ORiNOCO-MIB::oriWDSSetupTableEntryStatus,INTEGER,read-write,,current,enable(1):disable(2),This object is used to enable or disable a WDS table entry (link).
.1.3.6.1.4.1.11898.2.1.17.1.1.3,ORiNOCO-MIB::oriWDSSetupTablePartnerMACAddress,OCTET,read-write,,current,,This object represents the partner MAC address for a WDS table
.1.3.6.1.4.1.11898.2.1.18,ORiNOCO-MIB::orinocoTrap,,,,,,
.1.3.6.1.4.1.11898.2.1.18.1,ORiNOCO-MIB::oriTrapVariable,,,,,,
.1.3.6.1.4.1.11898.2.1.18.1.1,ORiNOCO-MIB::oriGenericTrapVariable,OCTET,read-only,,current,,This object is used to provide additional information on traps.
.1.3.6.1.4.1.11898.2.1.18.1.2,ORiNOCO-MIB::oriTrapVarMACAddress,OCTET,read-only,,current,,This object is used to store the MAC address of the device
.1.3.6.1.4.1.11898.2.1.18.1.3,ORiNOCO-MIB::oriTrapVarTFTPIPAddress,IpAddress,read-only,,current,,This object is used to store the IP Address of the TFTP server.
.1.3.6.1.4.1.11898.2.1.18.1.4,ORiNOCO-MIB::oriTrapVarTFTPFilename,OCTET,read-only,,current,,This object is used to store the name of the file on which the 
.1.3.6.1.4.1.11898.2.1.18.1.5,ORiNOCO-MIB::oriTrapVarTFTPOperation,INTEGER,read-only,,current,upload(1):download(2),This object is used to store the TFTP operation that failed, 
.1.3.6.1.4.1.11898.2.1.18.1.6,ORiNOCO-MIB::oriTrapVarUnauthorizedManagerIPaddress,IpAddress,read-only,,current,,This object is used to store the IP address of the unauthorized 
.1.3.6.1.4.1.11898.2.1.18.1.7,ORiNOCO-MIB::oriTrapVarFailedAuthenticationType,OCTET,read-only,,current,,This trap variable is used to specify the client authentication method/type that failed. The authentication methods/types are dependant on the device and can range from the following: - MAC Access Control List - RADIUS MAC Authentication - 802.1x Authentication specifying the EAP Type.
.1.3.6.1.4.1.11898.2.1.18.1.8,ORiNOCO-MIB::oriTrapVarUnAuthorizedManagerCount,Counter32,read-only,,current,,This object represents a counter for the number of unauthorized 
.1.3.6.1.4.1.11898.2.1.18.1.9,ORiNOCO-MIB::oriTrapVarTaskSuspended,OCTET,read-only,,current,,This object is used to inform what task has been suspended
.1.3.6.1.4.1.11898.2.1.18.1.10,ORiNOCO-MIB::oriConfigurationTrapsStatus,INTEGER,read-write,,current,enable(1):disable(2),This object is used to enable or disable the configuration
.1.3.6.1.4.1.11898.2.1.18.1.11,ORiNOCO-MIB::oriSecurityTrapsStatus,INTEGER,read-write,,current,enable(1):disable(2),This object is used to enable or disable the security
.1.3.6.1.4.1.11898.2.1.18.1.12,ORiNOCO-MIB::oriWirelessIfTrapsStatus,INTEGER,read-write,,current,enable(1):disable(2),This object is used to enable or disable the wireless 
.1.3.6.1.4.1.11898.2.1.18.1.13,ORiNOCO-MIB::oriOperationalTrapsStatus,INTEGER,read-write,,current,enable(1):disable(2),This object is used to enable or disable the operational
.1.3.6.1.4.1.11898.2.1.18.1.14,ORiNOCO-MIB::oriFlashMemoryTrapsStatus,INTEGER,read-write,,current,enable(1):disable(2),This object is used to enable or disable the flash memory
.1.3.6.1.4.1.11898.2.1.18.1.15,ORiNOCO-MIB::oriTFTPTrapsStatus,INTEGER,read-write,,current,enable(1):disable(2),This object is used to enable or disable the TFTP
.1.3.6.1.4.1.11898.2.1.18.1.16,ORiNOCO-MIB::oriTrapsImageStatus,INTEGER,read-write,,current,enable(1):disable(2),This object is used to enable or disable the Image
.1.3.6.1.4.1.11898.2.1.18.1.17,ORiNOCO-MIB::oriTrapVarUnauthorizedClientMACAddress,OCTET,read-only,,current,,This object is used to store the MAC Address of an unauthorized client station.
.1.3.6.1.4.1.11898.2.1.18.1.18,ORiNOCO-MIB::oriTrapVarWirelessCard,INTEGER,read-only,,current,pcCardA(1):pcCardB(2),This object is used to determine on which Wireless Card,
.1.3.6.1.4.1.11898.2.1.18.1.19,ORiNOCO-MIB::oriADSLIfTrapsStatus,INTEGER,read-write,,current,enable(1):disable(2),This object is used to enable or disable the ADSL
.1.3.6.1.4.1.11898.2.1.18.1.20,ORiNOCO-MIB::oriWORPTrapsStatus,INTEGER,read-write,,current,enable(1):disable(2),This object is used to enable or disable the WORP related traps.
.1.3.6.1.4.1.11898.2.1.18.1.21,ORiNOCO-MIB::oriTrapVarInterface,Integer32,read-only,,current,,This object is used to store the interface number.
.1.3.6.1.4.1.11898.2.1.18.2,ORiNOCO-MIB::oriConfigurationTraps,,,,,,This is the configuration related trap/notification group.
.1.3.6.1.4.1.11898.2.1.18.2.0,ORiNOCO-MIB::anonymous#9,,,,,,
.1.3.6.1.4.1.11898.2.1.18.2.0.1,ORiNOCO-MIB::oriTrapIPAddrAssignmentNotConfigured,,,,,,This trap is generated when the IP Address Pool Assignment 
.1.3.6.1.4.1.11898.2.1.18.2.0.2,ORiNOCO-MIB::oriTrapRADIUSNotConfigured,,,,,,This trap is generated when the RADIUS configuration objects 
.1.3.6.1.4.1.11898.2.1.18.2.0.3,ORiNOCO-MIB::oriTrapDNSIPNotConfigured,,,,,,This traps is generated when the DNS IP Address has not been 
.1.3.6.1.4.1.11898.2.1.18.2.0.4,ORiNOCO-MIB::oriTrapWINSIPNotConfigured,,,,,,This traps is generated when the WINS or NBNS IP Address has 
.1.3.6.1.4.1.11898.2.1.18.2.0.5,ORiNOCO-MIB::oriTrapRADIUSAuthenticationNotConfigured,,,,,,This trap is generated when the RADIUS authentication information has not been configured. Trap Severity Level: Major.
.1.3.6.1.4.1.11898.2.1.18.2.0.6,ORiNOCO-MIB::oriTrapRADIUSAccountingNotConfigured,,,,,,This trap is generated when the RADIUS accounting information has not been configured. Trap Severity Level: Major.
.1.3.6.1.4.1.11898.2.1.18.2.0.7,ORiNOCO-MIB::oriTrapDuplicateIPAddressEncountered,,,,,,This trap is generated when the device has encountered another  network device with he same IP Address. Trap Severity Level: Major.
.1.3.6.1.4.1.11898.2.1.18.2.0.8,ORiNOCO-MIB::oriTrapDHCPRelayServerTableNotConfigured,,,,,,This trap is generated when the DHCP relay agent server table is  empty or not configured. Trap Severity Level: Major.
.1.3.6.1.4.1.11898.2.1.18.2.0.9,ORiNOCO-MIB::oriTrapWORPIfNetworkSecretNotConfigured,,,,,,This trap is generated when the system network authentication  shared secret is not configured. Trap Severity Level: Major.
.1.3.6.1.4.1.11898.2.1.18.2.0.10,ORiNOCO-MIB::oriTrapVLANIDInvalidConfiguration,,,,,,This trap is generated when a VLAN ID configuration is invalid. Trap Severity Level: Major.
.1.3.6.1.4.1.11898.2.1.18.3,ORiNOCO-MIB::oriSecurityTraps,,,,,,This is the security related trap/notification group.
.1.3.6.1.4.1.11898.2.1.18.3.0,ORiNOCO-MIB::anonymous#12,,,,,,
.1.3.6.1.4.1.11898.2.1.18.3.0.1,ORiNOCO-MIB::oriTrapInvalidEncryptionKey,,,,,,This trap is generated when an invalid encryption key has been 
.1.3.6.1.4.1.11898.2.1.18.3.0.2,ORiNOCO-MIB::oriTrapAuthenticationFailure,,,,,,This trap is generated when a client authentication failure 
.1.3.6.1.4.1.11898.2.1.18.3.0.3,ORiNOCO-MIB::oriTrapUnauthorizedManagerDetected,,,,,,This trap is generated when an unauthorized manager has 
.1.3.6.1.4.1.11898.2.1.18.4,ORiNOCO-MIB::oriWirelessIfTraps,,,,,,This is the wireless interface or wireless card related trap/notification group.
.1.3.6.1.4.1.11898.2.1.18.4.0,ORiNOCO-MIB::anonymous#21,,,,,,
.1.3.6.1.4.1.11898.2.1.18.4.0.1,ORiNOCO-MIB::oriTrapWLCNotPresent,,,,,,This trap is generated when a wireless interface/card is not 
.1.3.6.1.4.1.11898.2.1.18.4.0.2,ORiNOCO-MIB::oriTrapWLCFailure,,,,,,This trap is generated when a general failure has occured with
.1.3.6.1.4.1.11898.2.1.18.4.0.3,ORiNOCO-MIB::oriTrapWLCRemoval,,,,,,This trap is generated when the wireless interface/card has been
.1.3.6.1.4.1.11898.2.1.18.4.0.4,ORiNOCO-MIB::oriTrapWLCIncompatibleFirmware,,,,,,This trap is generated when the firmware of the wireless 
.1.3.6.1.4.1.11898.2.1.18.4.0.5,ORiNOCO-MIB::oriTrapWLCVoltageDiscrepancy,,,,,,This trap is generated when a non 5 volt card or 3.3 volt  wireless interface/card is inserted in the device. Trap Severity Level: Critical.
.1.3.6.1.4.1.11898.2.1.18.4.0.6,ORiNOCO-MIB::oriTrapWLCIncompatibleVendor,,,,,,This trap is generated when an incompatible wireless vendor card  is inserted or present in the device. Trap Severity Level: Critical.
.1.3.6.1.4.1.11898.2.1.18.4.0.7,ORiNOCO-MIB::oriTrapWLCFirmwareDownloadFailure,,,,,,This trap is generated when a failure occurs during the firmware download process of the wireless interface/card. Trap Severity Level: Critical.
.1.3.6.1.4.1.11898.2.1.18.4.0.8,ORiNOCO-MIB::oriTrapWLCFirmwareFailure,,,,,,This trap is generated when a failure occurs in the wireless interface/card firmware. Trap Severity Level: Critical.
.1.3.6.1.4.1.11898.2.1.18.4.0.9,ORiNOCO-MIB::oriTrapWLCRadarInterferenceDetected,,,,,,This trap is generated when radar interference is detected on the channel being used by the wireless interface. The generic trap varible provides information on the channel where interference was detected. Trap Severity Level: Major.
.1.3.6.1.4.1.11898.2.1.18.5,ORiNOCO-MIB::oriOperationalTraps,,,,,,This is the operational related trap group group.
.1.3.6.1.4.1.11898.2.1.18.5.0,ORiNOCO-MIB::anonymous#31,,,,,,
.1.3.6.1.4.1.11898.2.1.18.5.0.1,ORiNOCO-MIB::oriTrapWatchDogTimerExpired,,,,,,This trap is generated when the software watch dog timer 
.1.3.6.1.4.1.11898.2.1.18.5.0.2,ORiNOCO-MIB::oriTrapRADIUSServerNotResponding,,,,,,This trap is generated when no response is received from the
.1.3.6.1.4.1.11898.2.1.18.5.0.3,ORiNOCO-MIB::oriTrapModuleNotInitialized,,,,,,This trap is generated when a certain software or hardware module 
.1.3.6.1.4.1.11898.2.1.18.5.0.4,ORiNOCO-MIB::oriTrapChangeInAdminState,,,,,,This trap is generated when the administration state of the 
.1.3.6.1.4.1.11898.2.1.18.5.0.5,ORiNOCO-MIB::oriTrapDeviceRebooting,,,,,,This trap is generated when the device has received a request 
.1.3.6.1.4.1.11898.2.1.18.5.0.6,ORiNOCO-MIB::oriTrapTaskSuspended,,,,,,This trap is generated when a task in the device has suspended.
.1.3.6.1.4.1.11898.2.1.18.5.0.7,ORiNOCO-MIB::oriTrapBootPFailed,,,,,,This trap is generated when a response to the BootP request is Trap Severity Level: Major.
.1.3.6.1.4.1.11898.2.1.18.5.0.8,ORiNOCO-MIB::oriTrapDHCPFailed,,,,,,This trap is generated when a response to the DHCP client request Trap Severity Level: Major.
.1.3.6.1.4.1.11898.2.1.18.5.0.9,ORiNOCO-MIB::oriTrapDNSClientLookupFailure,,,,,,This trap is generated when the DNS client attempts to resolve a specified hostname (DNS lookup) and a failure occurs. This could be the result of the DNS server being unreachable or returning an error for the hostname lookup. This trap specified the hostname that was  being resolved. Trap Severity Level: Major.
.1.3.6.1.4.1.11898.2.1.18.5.0.10,ORiNOCO-MIB::oriTrapSNTPFailure,,,,,,This trap is generated when SNTP service is enabled and no response  Trap Severity Level: Major.
.1.3.6.1.4.1.11898.2.1.18.6,ORiNOCO-MIB::oriFlashTraps,,,,,,This is the flash memory related trap group.
.1.3.6.1.4.1.11898.2.1.18.6.0,ORiNOCO-MIB::anonymous#33,,,,,,
.1.3.6.1.4.1.11898.2.1.18.6.0.1,ORiNOCO-MIB::oriTrapFlashMemoryEmpty,,,,,,This trap is generated when there is no data present in flash
.1.3.6.1.4.1.11898.2.1.18.6.0.2,ORiNOCO-MIB::oriTrapFlashMemoryCorrupted,,,,,,This trap is generated when the data content of flash memory is 
.1.3.6.1.4.1.11898.2.1.18.7,ORiNOCO-MIB::oriTFTPTraps,,,,,,This is the TFTP related trap group.
.1.3.6.1.4.1.11898.2.1.18.7.0,ORiNOCO-MIB::anonymous#36,,,,,,
.1.3.6.1.4.1.11898.2.1.18.7.0.1,ORiNOCO-MIB::oriTrapTFTPFailedOperation,,,,,,This trap is generated when a failure has occurred with the TFTP 
.1.3.6.1.4.1.11898.2.1.18.7.0.2,ORiNOCO-MIB::oriTrapTFTPOperationInitiated,,,,,,This trap is generated when a TFTP operation has been initiated.
.1.3.6.1.4.1.11898.2.1.18.7.0.3,ORiNOCO-MIB::oriTrapTFTPOperationCompleted,,,,,,This trap is generated when a TFTP operation has been completed.
.1.3.6.1.4.1.11898.2.1.18.8,ORiNOCO-MIB::oriMiscTraps,,,,,,This is the miscellaneous trap group.
.1.3.6.1.4.1.11898.2.1.18.9,ORiNOCO-MIB::oriImageTraps,,,,,,This is the image related trap group.
.1.3.6.1.4.1.11898.2.1.18.9.0,ORiNOCO-MIB::anonymous#40,,,,,,
.1.3.6.1.4.1.11898.2.1.18.9.0.1,ORiNOCO-MIB::oriTrapZeroSizeImage,,,,,,This trap is generated when a zero size image is loaded on the  device. Trap Severity Level: Major.
.1.3.6.1.4.1.11898.2.1.18.9.0.2,ORiNOCO-MIB::oriTrapInvalidImage,,,,,,This trap is generated when an invalid image is loaded on the device. Trap Severity Level: Major.
.1.3.6.1.4.1.11898.2.1.18.9.0.3,ORiNOCO-MIB::oriTrapImageTooLarge,,,,,,This trap is generated when the image loaded on the device  exceeds the size limitation of flash. Trap Severity Level: Major.
.1.3.6.1.4.1.11898.2.1.18.9.0.4,ORiNOCO-MIB::oriTrapIncompatibleImage,,,,,,This trap is generated when an incompatible image is loaded on  the device. Trap Severity Level: Major.
.1.3.6.1.4.1.11898.2.1.18.10,ORiNOCO-MIB::oriADSLIfTraps,,,,,,This is the ADSL interface related trap group.
.1.3.6.1.4.1.11898.2.1.18.10.0,ORiNOCO-MIB::anonymous#42,,,,,,
.1.3.6.1.4.1.11898.2.1.18.10.0.1,ORiNOCO-MIB::oriADSLIfLinkUp,,,,,,This trap is generated when ADSL connection is up.
.1.3.6.1.4.1.11898.2.1.18.10.0.2,ORiNOCO-MIB::oriADSLIfLinkDown,,,,,,This trap is generated ADSL connection is down.
.1.3.6.1.4.1.11898.2.1.18.11,ORiNOCO-MIB::oriWORPTraps,,,,,,This is the WORP related trap group.
.1.3.6.1.4.1.11898.2.1.18.11.0,ORiNOCO-MIB::anonymous#44,,,,,,
.1.3.6.1.4.1.11898.2.1.18.11.0.1,ORiNOCO-MIB::oriWORPStationRegister,,,,,,This trap is generated when a WORP satellite has registered on and interface of a base; a satellite will not generate this trap, but use oriWORPLinkUp instead. For the station indicated, the  oriStationStatTableOperStatus will be up. Trap Severity Level: Informational.
.1.3.6.1.4.1.11898.2.1.18.11.0.2,ORiNOCO-MIB::oriWORPStationDeRegister,,,,,,This trap is generated when a WORP satellite has been deleted  from an interface of a base; a satellite will not generate this  trap, but use oriWORPLinkDown instead. For the station indicated,  the oriStationStatTableOperStatus will be down. Trap Severity Level: Informational.
.1.3.6.1.4.1.11898.2.1.18.12,ORiNOCO-MIB::oriSysFeatureTraps,,,,,,This is the System Feature based License related trap group.
.1.3.6.1.4.1.11898.2.1.18.12.0,ORiNOCO-MIB::anonymous#49,,,,,,
.1.3.6.1.4.1.11898.2.1.18.12.0.1,ORiNOCO-MIB::oriTrapIncompatibleLicenseFile,,,,,,This trap is generated when a license file in the device's flash memory is not compatible with the current bootloader. Trap Severity Level: Major.
.1.3.6.1.4.1.11898.2.1.18.12.0.2,ORiNOCO-MIB::oriTrapFeatureNotSupported,,,,,,This trap is generated when a feature present in the license  codes is not supported by the current embedded software image. A newer embedded software image could support the feature or  there are more license that needed. Trap Severity Level: Informational.
.1.3.6.1.4.1.11898.2.1.18.12.0.3,ORiNOCO-MIB::oriTrapZeroLicenseFiles,,,,,,This trap is generated when a single license file is not present  in flash. This causes the device to operate in default mode  with very limited features enabled. Trap Severity Level: Critical.
.1.3.6.1.4.1.11898.2.1.18.12.0.4,ORiNOCO-MIB::oriTrapInvalidLicenseFile,,,,,,This trap is generated when a license file in the device's flash  memory has an invalid signature and will be ignored. Trap Severity Level: Minor.
.1.3.6.1.4.1.11898.2.1.18.12.0.5,ORiNOCO-MIB::oriTrapUselessLicense,,,,,,This trap is generated when a license code file does not contain  any valid feature code. The probably reason for this is that  after verification, not any of the features was meant for this  units MAC address. Trap Severity Level: Informational.
.1.3.6.1.4.1.11898.2.1.19,ORiNOCO-MIB::orinocoIPARP,,,,,,
.1.3.6.1.4.1.11898.2.1.19.1,ORiNOCO-MIB::oriProxyARPStatus,INTEGER,read-write,,current,enable(1):disable(2),This object is used to enable/disable the Proxy ARP functionality in the device.
.1.3.6.1.4.1.11898.2.1.19.2,ORiNOCO-MIB::oriIPARPFilteringStatus,INTEGER,read-write,,current,enable(1):disable(2),This object is used to enable/disable the IP/ARP functionality in the device.
.1.3.6.1.4.1.11898.2.1.19.3,ORiNOCO-MIB::oriIPARPFilteringIPAddress,IpAddress,read-write,,current,,This object is used to specify the IP/ARP Filtering address  in the device.
.1.3.6.1.4.1.11898.2.1.19.4,ORiNOCO-MIB::oriIPARPFilteringSubnetMask,IpAddress,read-write,,current,,This object is used to specify the IP/ARP Subnet Mask  in the device.
.1.3.6.1.4.1.11898.2.1.20,ORiNOCO-MIB::orinocoSpanningTree,,,,,,
.1.3.6.1.4.1.11898.2.1.20.1,ORiNOCO-MIB::oriSpanningTreeStatus,INTEGER,read-write,,current,enable(1):disable(2),This object is used to enable/disable the spanning tree protocol in the device.
.1.3.6.1.4.1.11898.2.1.21,ORiNOCO-MIB::orinocoSecurity,,,,,,
.1.3.6.1.4.1.11898.2.1.21.1,ORiNOCO-MIB::oriSecurityConfiguration,INTEGER,read-write,,current,none(1):dot1x(2):mixedWepAnddot1x(3),This object represents the supported security configuration options.
.1.3.6.1.4.1.11898.2.1.21.2,ORiNOCO-MIB::oriSecurityEncryptionKeyLengthTable,,not-accessible,,current,,This table is used to specify the encryption key length for the wireless interface(s).
.1.3.6.1.4.1.11898.2.1.21.2.1,ORiNOCO-MIB::oriSecurityEncryptionKeyLengthTableEntry,,not-accessible,ifIndex,current,,This object represents an entry in the encryption key  length table.
.1.3.6.1.4.1.11898.2.1.21.2.1.1,ORiNOCO-MIB::oriSecurityEncryptionKeyLength,INTEGER,read-write,,current,sixtyFourBits(1):oneHundredTwentyEightBits(2),This object represents the encryption key length, the supported key lengths are 64 bits (40 + 24 for IV), 128 bits (104 + 24 for IV),  and 152 bits (128 + 24 for IV).
.1.3.6.1.4.1.11898.2.1.21.3,ORiNOCO-MIB::oriSecurityRekeyingInterval,Integer32,read-write,,current,,This object represents the encryption rekeying interval in seconds.
.1.3.6.1.4.1.11898.2.1.22,ORiNOCO-MIB::orinocoPPPoE,,,,,,
.1.3.6.1.4.1.11898.2.1.22.1,ORiNOCO-MIB::oriPPPoEStatus,INTEGER,read-write,,current,enable(1):disable(2),This object allows to enable or disable the PPPoE service in the  device.
.1.3.6.1.4.1.11898.2.1.22.2,ORiNOCO-MIB::oriPPPoEMaximumNumberOfSessions,Integer32,read-write,,current,,This object represents the maximum number of PPPoE sessions.
.1.3.6.1.4.1.11898.2.1.22.3,ORiNOCO-MIB::oriPPPoENumberOfActiveSessions,Counter32,read-only,,current,,This object represents the number of active PPPoE sessions.
.1.3.6.1.4.1.11898.2.1.22.4,ORiNOCO-MIB::oriPPPoESessionTable,,not-accessible,,current,,This table is used to configure the PPPoE session information.
.1.3.6.1.4.1.11898.2.1.22.4.1,ORiNOCO-MIB::oriPPPoESessionTableEntry,,not-accessible,oriPPPoESessionISPName,current,,This object represents an entry in the PPPoE session table.
.1.3.6.1.4.1.11898.2.1.22.4.1.1,ORiNOCO-MIB::oriPPPoESessionTableIndex,Integer32,read-only,,current,,This object is used as the index to the PPPoE Session Table.
.1.3.6.1.4.1.11898.2.1.22.4.1.2,ORiNOCO-MIB::oriPPPoESessionWANConnectMode,INTEGER,read-write,,current,alwaysOn(1):onDemand(2):manual(3),This object represents the WAN connect mode.
.1.3.6.1.4.1.11898.2.1.22.4.1.3,ORiNOCO-MIB::oriPPPoESessionIdleTimeOut,Integer32,read-write,,current,,This object is used as a timeout for the PPPoE session to be disconnected from public side if idle for specified amount of  time.
.1.3.6.1.4.1.11898.2.1.22.4.1.4,ORiNOCO-MIB::oriPPPoESessionConnectTime,Counter32,read-only,,current,,This object identifies the PPPoE session connect time.
.1.3.6.1.4.1.11898.2.1.22.4.1.5,ORiNOCO-MIB::oriPPPoESessionConnectTimeLimitation,Integer32,read-write,,current,,This object represents the maximum connection time per session.
.1.3.6.1.4.1.11898.2.1.22.4.1.6,ORiNOCO-MIB::oriPPPoESessionConfigPADITxInterval,Integer32,read-write,,current,,This object represents the time in seconds between PADI retries  from the Host.
.1.3.6.1.4.1.11898.2.1.22.4.1.7,ORiNOCO-MIB::oriPPPoESessionConfigPADIMaxNumberOfRetries,Integer32,read-write,,current,,This object represents the number of times the Host sends  a PADI.
.1.3.6.1.4.1.11898.2.1.22.4.1.8,ORiNOCO-MIB::oriPPPoESessionBindingsNumberPADITx,Counter32,read-only,,current,,This object represents the number of PPPoE PADI transmitted.
.1.3.6.1.4.1.11898.2.1.22.4.1.9,ORiNOCO-MIB::oriPPPoESessionBindingsNumberPADTTx,Counter32,read-only,,current,,This object represents the number of PPPoE PADT transmitted.
.1.3.6.1.4.1.11898.2.1.22.4.1.10,ORiNOCO-MIB::oriPPPoESessionBindingsNumberServiceNameErrors,Counter32,read-only,,current,,This object represents the number of PPPoE Service-Name-Error  tags received/transmitted.
.1.3.6.1.4.1.11898.2.1.22.4.1.11,ORiNOCO-MIB::oriPPPoESessionBindingsNumberACSystemErrors,Counter32,read-only,,current,,This object represents the number of PPPoE AC-System-Error  tags received/transmitted.
.1.3.6.1.4.1.11898.2.1.22.4.1.12,ORiNOCO-MIB::oriPPPoESessionBindingsNumberGenericErrorsRx,Counter32,read-only,,current,,This object represents the number of PPPoE Generic-Error  tags received.
.1.3.6.1.4.1.11898.2.1.22.4.1.13,ORiNOCO-MIB::oriPPPoESessionBindingsNumberGenericErrorsTx,Counter32,read-only,,current,,This object represents the number of PPPoE Generic Error  tags transmitted.
.1.3.6.1.4.1.11898.2.1.22.4.1.14,ORiNOCO-MIB::oriPPPoESessionBindingsNumberMalformedPackets,Counter32,read-only,,current,,This object represents teh number of malformed PPPoE  packets received.
.1.3.6.1.4.1.11898.2.1.22.4.1.15,ORiNOCO-MIB::oriPPPoESessionBindingsNumberMultiplePADORx,Counter32,read-only,,current,,This object represents the number of PPPoE multiple PADO's  received after a PADI request.
.1.3.6.1.4.1.11898.2.1.22.4.1.16,ORiNOCO-MIB::oriPPPoESessionUserName,OCTET,read-write,,current,,This object represents the PPPoE user name.
.1.3.6.1.4.1.11898.2.1.22.4.1.17,ORiNOCO-MIB::oriPPPoESessionUserNamePassword,OCTET,read-write,,current,,This object represents the PPPoE user name password. This object 
.1.3.6.1.4.1.11898.2.1.22.4.1.18,ORiNOCO-MIB::oriPPPoESessionServiceName,OCTET,read-write,,current,,This object represents the PPPoE service name.
.1.3.6.1.4.1.11898.2.1.22.4.1.19,ORiNOCO-MIB::oriPPPoESessionISPName,OCTET,read-write,,current,,This object represents the PPPoE ISP name.
.1.3.6.1.4.1.11898.2.1.22.4.1.20,ORiNOCO-MIB::oriPPPoESessionTableStatus,INTEGER,read-write,,current,enable(1):disable(2):delete(3):create(4),This object represents the PPPoE ISP table entry status.
.1.3.6.1.4.1.11898.2.1.22.4.1.21,ORiNOCO-MIB::oriPPPoESessionWANManualConnect,INTEGER,read-write,,current,enable(1):disable(2),This object is used to connect of disconnect the PPPoE session
.1.3.6.1.4.1.11898.2.1.22.4.1.22,ORiNOCO-MIB::oriPPPoESessionWANConnectionStatus,INTEGER,read-only,,current,null(1):start(2):addingStack(3):stackAdded(4):stackAddError(5):connectFailed(6):authFailed(7):up(8):down(9):suspended(10):unknown(11),This object represents the state of the PPPoE WAN connection
.1.3.6.1.4.1.11898.2.1.22.5,ORiNOCO-MIB::oriPPPoEMACtoSessionTable,,not-accessible,,current,,This table is used to map client MAC address to PPPoE Session information for an ISP.
.1.3.6.1.4.1.11898.2.1.22.5.1,ORiNOCO-MIB::oriPPPoEMACtoSessionTableEntry,,not-accessible,oriPPPoEMACtoSessionTableIndex,current,,This object represents an entry in the PPPoE MAC to  Session table.
.1.3.6.1.4.1.11898.2.1.22.5.1.1,ORiNOCO-MIB::oriPPPoEMACtoSessionTableIndex,Integer32,read-only,,current,,This object is used as the index to the PPPoE Session Table.
.1.3.6.1.4.1.11898.2.1.22.5.1.2,ORiNOCO-MIB::oriPPPoEMACtoSessionTableMACAddress,OCTET,read-write,,current,,This object represents the client MAC address.
.1.3.6.1.4.1.11898.2.1.22.5.1.3,ORiNOCO-MIB::oriPPPoEMACtoSessionTableISPName,OCTET,read-write,,current,,This object represents the ISP name.
.1.3.6.1.4.1.11898.2.1.22.5.1.4,ORiNOCO-MIB::oriPPPoEMACtoSessionTableStatus,INTEGER,read-write,,current,enable(1):disable(2):delete(3):create(4),This object represents the PPPoE MAC to Session table 
.1.3.6.1.4.1.11898.2.1.23,ORiNOCO-MIB::orinocoConfig,,,,,,
.1.3.6.1.4.1.11898.2.1.23.1,ORiNOCO-MIB::oriConfigResetToDefaults,INTEGER,read-write,,current,bridgeMode(1):gatewayMode(2):gatewayModeDHCPClient(3):gatewayModePPPoE(4),This object represents the quickstart modes that the
.1.3.6.1.4.1.11898.2.1.23.2,ORiNOCO-MIB::oriConfigFileTable,,not-accessible,,current,,This table contains the current configuration files stored in the device. This table is used to manage the different configuration files.
.1.3.6.1.4.1.11898.2.1.23.2.1,ORiNOCO-MIB::oriConfigFileTableEntry,,not-accessible,oriConfigFileTableIndex,current,,This object represents an entry in the configuration file table.
.1.3.6.1.4.1.11898.2.1.23.2.1.1,ORiNOCO-MIB::oriConfigFileTableIndex,Integer32,read-only,,current,,This object represents the index to the configuration file
.1.3.6.1.4.1.11898.2.1.23.2.1.2,ORiNOCO-MIB::oriConfigFileName,OCTET,read-write,,current,,This object represents the configuration file name.
.1.3.6.1.4.1.11898.2.1.23.2.1.3,ORiNOCO-MIB::oriConfigFileStatus,INTEGER,read-write,,current,enable(1):disable(2):delete(3),This object represents the status of the configuration file. - Delete: in order to delete the configuration file
.1.3.6.1.4.1.11898.2.1.23.3,ORiNOCO-MIB::oriConfigSaveFile,OCTET,read-write,,current,,This object saves the configuration to the specified name.
.1.3.6.1.4.1.11898.2.1.23.4,ORiNOCO-MIB::oriConfigSaveKnownGood,INTEGER,read-write,,current,saveKnownGood(1),This object is used to identify the last know good configuration file used. Setting a value of 1 to this objecgt saves the current  configuration as the known good configuration.
.1.3.6.1.4.1.11898.2.1.24,ORiNOCO-MIB::orinocoDNS,,,,,,
.1.3.6.1.4.1.11898.2.1.24.1,ORiNOCO-MIB::oriDNSRedirectStatus,INTEGER,read-write,,current,enable(1):disable(2),This object is used to enable or disable the DNS Redirect
.1.3.6.1.4.1.11898.2.1.24.2,ORiNOCO-MIB::oriDNSRedirectMaxResponseWaitTime,Integer32,read-write,,current,,This object represents the maximum response wait time for
.1.3.6.1.4.1.11898.2.1.24.3,ORiNOCO-MIB::oriDNSPrimaryDNSIPAddress,IpAddress,read-write,,current,,This object represents the Primary DNS IP Address.
.1.3.6.1.4.1.11898.2.1.24.4,ORiNOCO-MIB::oriDNSSecondaryDNSIPAddress,IpAddress,read-write,,current,,This object represents the Secondary DNS IP Address.
.1.3.6.1.4.1.11898.2.1.24.5,ORiNOCO-MIB::orinocoDNSClient,,,,,,
.1.3.6.1.4.1.11898.2.1.24.5.1,ORiNOCO-MIB::oriDNSClientStatus,INTEGER,read-write,,current,enable(1):disable(2),This object is used to enable or disable the DNS Client feature.
.1.3.6.1.4.1.11898.2.1.24.5.2,ORiNOCO-MIB::oriDNSClientPrimaryServerIPAddress,IpAddress,read-write,,current,,This object represents the Primary Server DNS IP Address.
.1.3.6.1.4.1.11898.2.1.24.5.3,ORiNOCO-MIB::oriDNSClientSecondaryServerIPAddress,IpAddress,read-write,,current,,This object represents the Secondary Server DNS IP Address.
.1.3.6.1.4.1.11898.2.1.24.5.4,ORiNOCO-MIB::oriDNSClientDefaultDomainName,OCTET,read-write,,current,,This object represents the default domain name for the DNS Client.
.1.3.6.1.4.1.11898.2.1.25,ORiNOCO-MIB::orinocoAOL,,,,,,
.1.3.6.1.4.1.11898.2.1.25.1,ORiNOCO-MIB::oriAOLNATALGStatus,INTEGER,read-write,,current,enable(1):disable(2),This object is used to enable/disable the AOL NAT Application
.1.3.6.1.4.1.11898.2.1.26,ORiNOCO-MIB::orinocoNAT,,,,,,
.1.3.6.1.4.1.11898.2.1.26.1,ORiNOCO-MIB::oriNatType,Integer32,read-write,,current,,A Bit Mask documenting the NAT device's actual  - Basic-NAT (Bit 0)  - NAPT (Bit 1)  - Bi-directional-NAT (Bit 2)  - Twice-NAT (Bit 3)  - RSA-IP-Server (Bit 4)  - RSAP-IP-Server (Bit 5)  - Bit 0, if set, indicates that Basic-NAT is configured.  - Bit 1, if set, indicates that NAPT is configured.  - Bit 2, if set, indicates that Bi-directional-NAT  - Bit 3, if set, indicates that Twice-NAT is configured.  - Bit 4, if set, indicates that RSA-IP-Server is  - Bit 5, if set, indicates that RSAP-IP-Server 
.1.3.6.1.4.1.11898.2.1.26.2,ORiNOCO-MIB::oriNatStaticBindStatus,INTEGER,read-write,,current,enable(1):disable(2),This object is used to enable or disable static bind entries  on the NAT device.
.1.3.6.1.4.1.11898.2.1.26.3,ORiNOCO-MIB::oriNatStaticIPBindTable,,not-accessible,,current,,This table contains NAT IP bind specific information.
.1.3.6.1.4.1.11898.2.1.26.3.1,ORiNOCO-MIB::oriNatStaticIPBindTableEntry,,not-accessible,oriNatStaticIPBindTableIndex,current,,This object is an entry in the NAT Static IP Bind Table.
.1.3.6.1.4.1.11898.2.1.26.3.1.1,ORiNOCO-MIB::oriNatStaticIPBindTableIndex,Integer32,read-only,,current,,This object is used as the index for the NAT static IP 
.1.3.6.1.4.1.11898.2.1.26.3.1.2,ORiNOCO-MIB::oriNatStaticIPBindLocalAddress,IpAddress,read-write,,current,,This object represents the local IP address for this NAT
.1.3.6.1.4.1.11898.2.1.26.3.1.3,ORiNOCO-MIB::oriNatStaticIPBindRemoteAddress,IpAddress,read-write,,current,,This object represents the remote IP address for this NAT Static IP bind Table entry.
.1.3.6.1.4.1.11898.2.1.26.3.1.4,ORiNOCO-MIB::oriNatStaticIPBindTableEntryStatus,INTEGER,read-write,,current,enable(1):disable(2):delete(3):create(4),The object indicates the status of the NAT Static IP Bind 
.1.3.6.1.4.1.11898.2.1.26.4,ORiNOCO-MIB::oriNatStaticPortBindTable,,not-accessible,,current,,This table is used to configure NAT Port bind specific 
.1.3.6.1.4.1.11898.2.1.26.4.1,ORiNOCO-MIB::oriNatStaticPortBindTableEntry,,not-accessible,oriNatStaticPortBindTableIndex,current,,This object represents an entry in the NAT Static Port Bind 
.1.3.6.1.4.1.11898.2.1.26.4.1.1,ORiNOCO-MIB::oriNatStaticPortBindTableIndex,Integer32,read-only,,current,,This object is used as the index for the NAT static Port 
.1.3.6.1.4.1.11898.2.1.26.4.1.2,ORiNOCO-MIB::oriNatStaticPortBindLocalAddress,IpAddress,read-write,,current,,This object represents the local IP address for this NAT Static
.1.3.6.1.4.1.11898.2.1.26.4.1.3,ORiNOCO-MIB::oriNatStaticPortBindLocalPort,Integer32,read-write,,current,,This object represents the local port number for this NAT Static Port bind Table entry.
.1.3.6.1.4.1.11898.2.1.26.4.1.4,ORiNOCO-MIB::oriNatStaticPortBindRemotePort,Integer32,read-write,,current,,This object represents the remote port number for this NAT Static Port bind Table entry.
.1.3.6.1.4.1.11898.2.1.26.4.1.5,ORiNOCO-MIB::oriNatStaticPortBindPortType,INTEGER,read-write,,current,tcp(1):udp(2):both(3),This object represents the port type for this NAT Static
.1.3.6.1.4.1.11898.2.1.26.4.1.6,ORiNOCO-MIB::oriNatStaticPortBindTableEntryStatus,INTEGER,read-write,,current,enable(1):disable(2):delete(3):create(4),The object indicates the status of the NAT Static Port Bind 
.1.3.6.1.4.1.11898.2.1.27,ORiNOCO-MIB::orinocoPing,,,,,,
.1.3.6.1.4.1.11898.2.1.27.1,ORiNOCO-MIB::oriPingTestStatus,INTEGER,read-write,,current,disable(1):pinging(2):pingResultsAvailable(3),This object is used to control the ping test. 
.1.3.6.1.4.1.11898.2.1.27.2,ORiNOCO-MIB::oriPingTestTargetIPAdddress,IpAddress,read-write,,current,,This object represents the target IP Address for the ping test.
.1.3.6.1.4.1.11898.2.1.27.3,ORiNOCO-MIB::oriPingTestNumberOfPingRequests,Integer32,read-write,,current,,This object represents the number of ping requests that will be
.1.3.6.1.4.1.11898.2.1.27.4,ORiNOCO-MIB::oriPingTestPacketSize,Integer32,read-write,,current,,This object represents the packet size for the ping requests/
.1.3.6.1.4.1.11898.2.1.27.5,ORiNOCO-MIB::oriPingTestRequestsTx,Counter32,read-only,,current,,This counter represents the total number of ping requests/messages
.1.3.6.1.4.1.11898.2.1.27.6,ORiNOCO-MIB::oriPingTestRepliesRx,Counter32,read-only,,current,,This counter represents the number of ping replies received from
.1.3.6.1.4.1.11898.2.1.27.7,ORiNOCO-MIB::oriPingTestTimeoutCount,Counter32,read-only,,current,,This counter represents the number of timeouts or ping failures to
.1.3.6.1.4.1.11898.2.1.29,ORiNOCO-MIB::orinocoSpectraLink,,,,,,
.1.3.6.1.4.1.11898.2.1.29.1,ORiNOCO-MIB::oriSpectraLinkStatus,INTEGER,read-write,,current,enable(1):disable(2),This object is used to enable or disable the SpectraLink VoIP 
.1.3.6.1.4.1.11898.2.1.30,ORiNOCO-MIB::orinocoVLAN,,,,,,
.1.3.6.1.4.1.11898.2.1.30.1,ORiNOCO-MIB::oriVLANStatus,INTEGER,read-write,,current,enable(1):disable(2),This object is used to enable or disable the VLAN feature.
.1.3.6.1.4.1.11898.2.1.30.2,ORiNOCO-MIB::oriVLANMgmtIdentifier,Integer32,read-write,,current,,This object represents the VLAN management Identifier (ID).
.1.3.6.1.4.1.11898.2.1.30.3,ORiNOCO-MIB::oriVLANIDTable,,not-accessible,,current,,This table is used to configure the VLAN IDs for the device.
.1.3.6.1.4.1.11898.2.1.30.3.1,ORiNOCO-MIB::oriVLANIDTableEntry,,not-accessible,oriVLANIDTableIndex,current,,This object represents an entry in the respective table. In this
.1.3.6.1.4.1.11898.2.1.30.3.1.1,ORiNOCO-MIB::oriVLANIDTableIndex,Integer32,read-only,,current,,This object represents the index to the VLAN ID Table.
.1.3.6.1.4.1.11898.2.1.30.3.1.2,ORiNOCO-MIB::oriVLANIDTableIdentifier,Integer32,read-write,,current,,This object represents the VLAN Identifier (ID).
.1.3.6.1.4.1.11898.2.1.31,ORiNOCO-MIB::orinocoDMZ,,,,,,
.1.3.6.1.4.1.11898.2.1.31.1,ORiNOCO-MIB::oriDMZHostTable,,not-accessible,,current,,A table containing DMZ host IP information. 
.1.3.6.1.4.1.11898.2.1.31.1.1,ORiNOCO-MIB::oriDMZHostTableEntry,,not-accessible,oriDMZHostTableIndex,current,,This object represents an entry in the DMZ host IP Table.
.1.3.6.1.4.1.11898.2.1.31.1.1.1,ORiNOCO-MIB::oriDMZHostTableIndex,Integer32,read-only,,current,,This object is used as the index for the DMZ host IP Table.
.1.3.6.1.4.1.11898.2.1.31.1.1.2,ORiNOCO-MIB::oriDMZHostTableHostIP,IpAddress,read-write,,current,,This object represents the DMZ host IP address.
.1.3.6.1.4.1.11898.2.1.31.1.1.3,ORiNOCO-MIB::oriDMZHostTableComment,OCTET,read-write,,current,,This objecgt is used for an optional comment associated to the 
.1.3.6.1.4.1.11898.2.1.31.1.1.4,ORiNOCO-MIB::oriDMZHostTableEntryStatus,INTEGER,read-write,,current,enable(1):disable(2):delete(3):create(4),The object indicates the status of the DMZ host IP Table entry.
.1.3.6.1.4.1.11898.2.1.32,ORiNOCO-MIB::orinocoOEM,,,,,,
.1.3.6.1.4.1.11898.2.1.32.1,ORiNOCO-MIB::oriOEMName,OCTET,read-only,,current,,This object is used to specify the OEM name.
.1.3.6.1.4.1.11898.2.1.32.2,ORiNOCO-MIB::oriOEMHomeUrl,OCTET,read-write,,current,,This object is used to specify the OEM home URL.
.1.3.6.1.4.1.11898.2.1.32.3,ORiNOCO-MIB::oriOEMProductName,OCTET,read-only,,current,,This object represents the product name. It is the same name as  shown in all management Web pages.
.1.3.6.1.4.1.11898.2.1.32.4,ORiNOCO-MIB::oriOEMProductModel,OCTET,read-only,,current,,This object represents the product model.
.1.3.6.1.4.1.11898.2.1.32.5,ORiNOCO-MIB::oriOEMLogoImageFile,OCTET,read-only,,current,,This object represents the name of logo image file.
.1.3.6.1.4.1.11898.2.1.32.6,ORiNOCO-MIB::oriOEMNoNavLogoImageFile,OCTET,read-only,,current,,This object represents the name of no nav. logo image file.
.1.3.6.1.4.1.11898.2.1.33,ORiNOCO-MIB::orinocoStationStatistics,,,,,,
.1.3.6.1.4.1.11898.2.1.33.1,ORiNOCO-MIB::oriStationStatTable,,not-accessible,,current,,This table contains wireless stations statistics.
.1.3.6.1.4.1.11898.2.1.33.1.1,ORiNOCO-MIB::oriStationStatTableEntry,,not-accessible,oriStationStatTableIndex,current,,This object represents an entry in the respective table. In this
.1.3.6.1.4.1.11898.2.1.33.1.1.1,ORiNOCO-MIB::oriStationStatTableIndex,Integer32,read-only,,current,,This object represents the index of the stations statistics table. This table is limited to 500 entries.
.1.3.6.1.4.1.11898.2.1.33.1.1.2,ORiNOCO-MIB::oriStationStatTableMACAddress,OCTET,read-only,,current,,This object represents the MAC address of the station for which  the statistics are gathered.
.1.3.6.1.4.1.11898.2.1.33.1.1.3,ORiNOCO-MIB::oriStationStatTableIPAddress,IpAddress,read-only,,current,,This object represents the IP address of the stations for which  the statistics are gathered. If the IP address is not known,  0.0.0.0 will be returned.
.1.3.6.1.4.1.11898.2.1.33.1.1.4,ORiNOCO-MIB::oriStationStatTableInterface,Integer32,read-only,,current,,This object represents the number of the interface on which the  station is last seen.
.1.3.6.1.4.1.11898.2.1.33.1.1.5,ORiNOCO-MIB::oriStationStatTableName,OCTET,read-only,,current,,This object represents the name of the station. If the name is  not known, an empty string will be returned.
.1.3.6.1.4.1.11898.2.1.33.1.1.6,ORiNOCO-MIB::oriStationStatTableType,INTEGER,read-only,,current,sta(1):wds(2):worpBase(3):worpSatellite(4):norc(5),This object represents the type of station.
.1.3.6.1.4.1.11898.2.1.33.1.1.7,ORiNOCO-MIB::oriStationStatTableMACProtocol,INTEGER,read-only,,current,ieee802dot11(1):ieee802dot11a(2):ieee802dot11b(3):worp(4),This object represents the MAC protocol for this station.
.1.3.6.1.4.1.11898.2.1.33.1.1.8,ORiNOCO-MIB::oriStationStatTableAdminStatus,INTEGER,read-only,,current,up(1):down(2):testing(3),This object represents the administrative state for the station.  The testing(3) state indicates that no operational packets can  be passed.
.1.3.6.1.4.1.11898.2.1.33.1.1.9,ORiNOCO-MIB::oriStationStatTableOperStatus,INTEGER,read-only,,current,up(1):down(2):testing(3),This object represents the current operational state of the  interface. The testing(3) state indicates that no operational  packets can be passed.
.1.3.6.1.4.1.11898.2.1.33.1.1.10,ORiNOCO-MIB::oriStationStatTableLastChange,TimeTicks,read-only,,current,,This object represents the value of sysUpTime at the time the  station entered its current operational state. If the current  state was entered prior to the last re-initialization of the  local network management subsystem, then this object contains a  zero value.
.1.3.6.1.4.1.11898.2.1.33.1.1.11,ORiNOCO-MIB::oriStationStatTableLastState,INTEGER,read-only,,current,unknown(1):registering(2):authenticating(3):registered(4):timeout(5):aborded(6):rejected(7):linktest(8),This object represents the last state of this station.
.1.3.6.1.4.1.11898.2.1.33.1.1.12,ORiNOCO-MIB::oriStationStatTableInOctets,Counter32,read-only,,current,,The total number of octets received from the station, 
.1.3.6.1.4.1.11898.2.1.33.1.1.13,ORiNOCO-MIB::oriStationStatTableInUcastPkts,Counter32,read-only,,current,,This object represents the number of unicast packets from the  station that are further processed by either by the bridge/router  or by the internal host.
.1.3.6.1.4.1.11898.2.1.33.1.1.14,ORiNOCO-MIB::oriStationStatTableInNUcastPkts,Counter32,read-only,,current,,This object represents the number of non-unicast packets  (i.e. broadcast or multicast) from the station that are further  processed by either by the bridge/router or by the internal host.
.1.3.6.1.4.1.11898.2.1.33.1.1.15,ORiNOCO-MIB::oriStationStatTableInDiscards,Counter32,read-only,,current,,This object represents the number of inbound packets which were  chosen to be discarded even though no errors had been detected to  prevent their being deliverable to the internal bridge/router or  the internal host. One possible reason for discarding such a  packet could be to lack of buffer space.
.1.3.6.1.4.1.11898.2.1.33.1.1.16,ORiNOCO-MIB::oriStationStatTableOutOctets,Counter32,read-only,,current,,This object represents the total number of octets send to the  station, including framing characters.
.1.3.6.1.4.1.11898.2.1.33.1.1.17,ORiNOCO-MIB::oriStationStatTableOutUcastPkts,Counter32,read-only,,current,,This object represents the number of packets that the internal  bridge/router or the internal host requested be transmitted to the  station, including those that were discarded or not sent.
.1.3.6.1.4.1.11898.2.1.33.1.1.18,ORiNOCO-MIB::oriStationStatTableOutNUcastPkts,Counter32,read-only,,current,,This object represents the number of packets that the internal  bridge/router or the internal host requested be transmitted to a  non-unicast (i.e. broadcast or multicast) address that includes  the station. This counter includes those packets that were  discarded or not sent.
.1.3.6.1.4.1.11898.2.1.33.1.1.19,ORiNOCO-MIB::oriStationStatTableOutDiscards,Counter32,read-only,,current,,This object represents the number of outbound packets which were  chosen to be discarded even though no errors had been detected to  prevent their being deliverable to the internal bridge/router or  the internal host. One possible reason for discarding such a  packet could be to lack of buffer space.
.1.3.6.1.4.1.11898.2.1.33.1.1.20,ORiNOCO-MIB::oriStationStatTableInSignal,Integer32,read-only,,current,,This object represents the current signal level calculated over  the inbound packets from this station. This variable indicates  the running average of the local signal level using the algorithm 
.1.3.6.1.4.1.11898.2.1.33.1.1.21,ORiNOCO-MIB::oriStationStatTableInNoise,Integer32,read-only,,current,,This object represents the current noise level calculated over  the inbound packets from this station. This variable indicates  the running average of the local noise level using the algorithm 
.1.3.6.1.4.1.11898.2.1.33.1.1.22,ORiNOCO-MIB::oriStationStatTableRemoteSignal,Integer32,read-only,,current,,This object represents the current remote signal level calculated  over the inbound packets from this station on the remote station.  This variable indicates the running average of the remote signal  level using the algorithm (3/4*oldvalue + 1/4*newvalue).
.1.3.6.1.4.1.11898.2.1.33.1.1.23,ORiNOCO-MIB::oriStationStatTableRemoteNoise,Integer32,read-only,,current,,This object represents the current remote noise level calculated  over the inbound packets from this station on the remote station.  This variable indicates the running average of the remote noise  level using the algorithm (3/4*oldvalue + 1/4*newvalue).
.1.3.6.1.4.1.11898.2.1.33.1.1.24,ORiNOCO-MIB::oriStationStatTableLastInPktTime,TimeTicks,read-only,,current,,This object represents the value of sysUpTime at the time the  last packet from the remote station was received.
.1.3.6.1.4.1.11898.2.1.33.2,ORiNOCO-MIB::oriStationStatStatus,INTEGER,read-write,,current,enable(1):disable(2),This object is used to enable or disable the monitoring of the  wireless station statistics.
.1.3.6.1.4.1.11898.2.1.34,ORiNOCO-MIB::orinocoSNTP,,,,,,
.1.3.6.1.4.1.11898.2.1.34.1,ORiNOCO-MIB::oriSNTPStatus,INTEGER,read-write,,current,enable(1):disable(2),This object is used to enable or disable the SNTP functionality.
.1.3.6.1.4.1.11898.2.1.34.2,ORiNOCO-MIB::oriSNTPPrimaryServerNameOrIPAddress,OCTET,read-write,,current,,This object represents the primary SNTP server IP address or host  name.
.1.3.6.1.4.1.11898.2.1.34.3,ORiNOCO-MIB::oriSNTPSecondaryServerNameOrIPAddress,OCTET,read-write,,current,,This object represents the secondary SNTP server IP address or host name.
.1.3.6.1.4.1.11898.2.1.34.4,ORiNOCO-MIB::oriSNTPTimeZone,INTEGER,read-write,,current,dateline(1):samoa(2):hawaii(3):alaska(4):pacific-us(5):mountain-us(6):arizona(7):central-us(8):mexico-city(9):eastern-us(10):indiana(11):atlantic-canada(12):santiago(13):newfoundland(14):brasilia(15):buenos-aires(16):mid-atlantic(17):azores(18):london(19):western-europe(20):eastern-europe(21):cairo(22):russia-iraq(23):iran(24):arabian(25):afghanistan(26):pakistan(27):india(28):bangladesh(29):burma(30):bangkok(31):australia-wt(32):hong-kong(33):beijing(34):japan-korea(35):australia-ct(36):australia-et(37):central-pacific(38):new-zealand(39):tonga(40):western-samoa(41),This parameter is used for the device to know how to adjust GMT for 
.1.3.6.1.4.1.11898.2.1.34.5,ORiNOCO-MIB::oriSNTPDateAndTime,OCTET,read-only,,current,,This object represents the Date and Time. The format of this object is the same as the DateAndTime textual convention.
.1.3.6.1.4.1.11898.2.1.34.6,ORiNOCO-MIB::oriSNTPDayLightSavingTime,INTEGER,read-write,,current,plus-two(1):plus-one(2):unchanged(3):minus-one(4):minus-two(5),This parameter indicates the number of hours to adjust for 
.1.3.6.1.4.1.11898.2.1.34.7,ORiNOCO-MIB::oriSNTPYear,Integer32,read-write,,current,,This object represents the year. This object can be used to manually configure the year in case the Date and Time is not retrieved from an SNTP server.
.1.3.6.1.4.1.11898.2.1.34.8,ORiNOCO-MIB::oriSNTPMonth,Integer32,read-write,,current,,This object represents the month. This object can be used to manually configure the month in case the Date and Time is not retrieved from an SNTP server.
.1.3.6.1.4.1.11898.2.1.34.9,ORiNOCO-MIB::oriSNTPDay,Integer32,read-write,,current,,This object represents the day of the month. This object can be used  to manually configure the year in case the Date and Time is not  retrieved from an SNTP server.
.1.3.6.1.4.1.11898.2.1.34.10,ORiNOCO-MIB::oriSNTPHour,Integer32,read-write,,current,,This object represents the hour of day. This object can be used  to manually configure the hour in case the Date and Time is not  retrieved from an SNTP server.
.1.3.6.1.4.1.11898.2.1.34.11,ORiNOCO-MIB::oriSNTPMinutes,Integer32,read-write,,current,,This object represents the minutes. This object can be used to  manually configure the minutes in case the Date and Time is not  retrieved from an SNTP server.
.1.3.6.1.4.1.11898.2.1.34.12,ORiNOCO-MIB::oriSNTPSeconds,Integer32,read-write,,current,,This object represents the number of seconds. This object can be used  to manually configure the seconds in case the Date and Time is not  retrieved from an SNTP server.
.1.3.6.1.4.1.11898.2.2,ORiNOCO-MIB::orinocoNotifications,,,,,,
.1.3.6.1.4.1.11898.2.3,ORiNOCO-MIB::orinocoConformance,,,,,,
.1.3.6.1.4.1.11898.2.3.1,ORiNOCO-MIB::orinocoGroups,,,,,,
.1.3.6.1.4.1.11898.2.3.2,ORiNOCO-MIB::orinocoCompliances,,,,,,
.1.3.6.1.4.1.11898.2.4,ORiNOCO-MIB::orinocoProducts,,,,,,
.1.3.6.1.4.1.11898.2.4.1,ORiNOCO-MIB::ap1000,,,,,,
.1.3.6.1.4.1.11898.2.4.2,ORiNOCO-MIB::rg1000,,,,,,
.1.3.6.1.4.1.11898.2.4.3,ORiNOCO-MIB::as1000,,,,,,
.1.3.6.1.4.1.11898.2.4.4,ORiNOCO-MIB::as2000,,,,,,
.1.3.6.1.4.1.11898.2.4.5,ORiNOCO-MIB::ap500,,,,,,
.1.3.6.1.4.1.11898.2.4.6,ORiNOCO-MIB::ap2000,,,,,,
.1.3.6.1.4.1.11898.2.4.7,ORiNOCO-MIB::bg2000,,,,,,
.1.3.6.1.4.1.11898.2.4.8,ORiNOCO-MIB::rg1100,,,,,,
.1.3.6.1.4.1.11898.2.4.9,ORiNOCO-MIB::or2000,,,,,,
.1.3.6.1.4.1.11898.2.4.10,ORiNOCO-MIB::alphaOne,,,,,,
.1.3.6.1.5,SNMPv2-SMI::security,,,,,,
.1.3.6.1.6,SNMPv2-SMI::snmpV2,,,,,,
.1.3.6.1.6.1,SNMPv2-SMI::snmpDomains,,,,,,
.1.3.6.1.6.2,SNMPv2-SMI::snmpProxys,,,,,,
.1.3.6.1.6.3,SNMPv2-SMI::snmpModules,,,,,,
.1.3.6.1.6.3.1,SNMPv2-MIB::snmpMIB,,,,,,The MIB module for SNMP entities. Copyright (C) The Internet Society (2002). This version of this MIB module is part of RFC 3418; see the RFC itself for full legal notices. 
.1.3.6.1.6.3.1.1,SNMPv2-MIB::snmpMIBObjects,,,,,,
.1.3.6.1.6.3.1.1.4,SNMPv2-MIB::snmpTrap,,,,,,
.1.3.6.1.6.3.1.1.4.1,SNMPv2-MIB::snmpTrapOID,OBJECT,accessible-for-notify,,current,,The authoritative identification of the notification currently being sent. This variable occurs as the second varbind in every SNMPv2-Trap-PDU and InformRequest-PDU.
.1.3.6.1.6.3.1.1.4.3,SNMPv2-MIB::snmpTrapEnterprise,OBJECT,accessible-for-notify,,current,,The authoritative identification of the enterprise associated with the trap currently being sent. When an SNMP proxy agent is mapping an RFC1157 Trap-PDU into a SNMPv2-Trap-PDU, this variable occurs as the last varbind.
.1.3.6.1.6.3.1.1.5,SNMPv2-MIB::snmpTraps,,,,,,
.1.3.6.1.6.3.1.1.5.1,SNMPv2-MIB::coldStart,,,,,,A coldStart trap signifies that the SNMP entity, supporting a notification originator application, is reinitializing itself and that its configuration may have been altered.
.1.3.6.1.6.3.1.1.5.2,SNMPv2-MIB::warmStart,,,,,,A warmStart trap signifies that the SNMP entity, supporting a notification originator application, is reinitializing itself such that its configuration is unaltered.
.1.3.6.1.6.3.1.1.5.3,IF-MIB::linkDown,,,,,,A linkDown trap signifies that the SNMP entity, acting in an agent role, has detected that the ifOperStatus object for one of its communication links is about to enter the down state from some other state (but not from the notPresent state). This other state is indicated by the included value of ifOperStatus.
.1.3.6.1.6.3.1.1.5.4,IF-MIB::linkUp,,,,,,A linkUp trap signifies that the SNMP entity, acting in an agent role, has detected that the ifOperStatus object for one of its communication links left the down state and transitioned into some other state (but not into the notPresent state). This other state is indicated by the included value of ifOperStatus.
.1.3.6.1.6.3.1.1.5.5,SNMPv2-MIB::authenticationFailure,,,,,,An authenticationFailure trap signifies that the SNMP entity has received a protocol message that is not properly authenticated. While all implementations of SNMP entities MAY be capable of generating this trap, the snmpEnableAuthenTraps object indicates whether this trap will be generated.
.1.3.6.1.6.3.1.1.6,SNMPv2-MIB::snmpSet,,,,,,
.1.3.6.1.6.3.1.1.6.1,SNMPv2-MIB::snmpSetSerialNo,INTEGER,read-write,,current,,An advisory lock used to allow several cooperating command generator applications to coordinate their use of the SNMP set operation. This object is used for coarse-grain coordination. To achieve fine-grain coordination, one or more similar objects might be defined within each MIB group, as appropriate.
.1.3.6.1.6.3.1.2,SNMPv2-MIB::snmpMIBConformance,,,,,,
.1.3.6.1.6.3.1.2.1,SNMPv2-MIB::snmpMIBCompliances,,,,,,
.1.3.6.1.6.3.1.2.1.2,SNMPv2-MIB::snmpBasicCompliance,,,,,,The compliance statement for SNMPv2 entities which implement the SNMPv2 MIB. This compliance statement is replaced by snmpBasicComplianceRev2.
.1.3.6.1.6.3.1.2.1.3,SNMPv2-MIB::snmpBasicComplianceRev2,,,,,,The compliance statement for SNMP entities which implement this MIB module.
.1.3.6.1.6.3.1.2.2,SNMPv2-MIB::snmpMIBGroups,,,,,,
.1.3.6.1.6.3.1.2.2.5,SNMPv2-MIB::snmpSetGroup,,,,,,A collection of objects which allow several cooperating command generator applications to coordinate their use of the set operation.
.1.3.6.1.6.3.1.2.2.6,SNMPv2-MIB::systemGroup,,,,,,The system group defines objects which are common to all managed systems.
.1.3.6.1.6.3.1.2.2.7,SNMPv2-MIB::snmpBasicNotificationsGroup,,,,,,The basic notifications implemented by an SNMP entity supporting command responder applications.
.1.3.6.1.6.3.1.2.2.8,SNMPv2-MIB::snmpGroup,,,,,,A collection of objects providing basic instrumentation and control of an SNMP entity.
.1.3.6.1.6.3.1.2.2.9,SNMPv2-MIB::snmpCommunityGroup,,,,,,A collection of objects providing basic instrumentation of a SNMP entity which supports community-based authentication.
.1.3.6.1.6.3.1.2.2.10,SNMPv2-MIB::snmpObsoleteGroup,,,,,,A collection of objects from RFC 1213 made obsolete by this MIB module.
.1.3.6.1.6.3.1.2.2.11,SNMPv2-MIB::snmpWarmStartNotificationGroup,,,,,,An additional notification for an SNMP entity supporting command responder applications, if it is able to reinitialize itself such that its configuration is unaltered.
.1.3.6.1.6.3.1.2.2.12,SNMPv2-MIB::snmpNotificationGroup,,,,,,These objects are required for entities which support notification originator applications.
.1.3.6.1.6.3.10,SNMP-FRAMEWORK-MIB::snmpFrameworkMIB,,,,,,The SNMP Management Architecture MIB Copyright (C) The Internet Society (2002). This version of this MIB module is part of RFC 3411; see the RFC itself for full legal notices. 
.1.3.6.1.6.3.10.1,SNMP-FRAMEWORK-MIB::snmpFrameworkAdmin,,,,,,
.1.3.6.1.6.3.10.1.1,SNMP-FRAMEWORK-MIB::snmpAuthProtocols,,,,,,Registration point for standards-track authentication protocols used in SNMP Management Frameworks. 
.1.3.6.1.6.3.10.1.2,SNMP-FRAMEWORK-MIB::snmpPrivProtocols,,,,,,Registration point for standards-track privacy protocols used in SNMP Management Frameworks. 
.1.3.6.1.6.3.10.2,SNMP-FRAMEWORK-MIB::snmpFrameworkMIBObjects,,,,,,
.1.3.6.1.6.3.10.2.1,SNMP-FRAMEWORK-MIB::snmpEngine,,,,,,
.1.3.6.1.6.3.10.2.1.1,SNMP-FRAMEWORK-MIB::snmpEngineID,OCTET,read-only,,current,,An SNMP engine's administratively-unique identifier. This information SHOULD be stored in non-volatile storage so that it remains constant across re-initializations of the SNMP engine. 
.1.3.6.1.6.3.10.2.1.2,SNMP-FRAMEWORK-MIB::snmpEngineBoots,INTEGER,read-only,,current,,The number of times that the SNMP engine has (re-)initialized itself since snmpEngineID was last configured. 
.1.3.6.1.6.3.10.2.1.3,SNMP-FRAMEWORK-MIB::snmpEngineTime,INTEGER,read-only,,current,,The number of seconds since the value of the snmpEngineBoots object last changed. When incrementing this object's value would cause it to exceed its maximum, snmpEngineBoots is incremented as if a re-initialization had occurred, and this object's value consequently reverts to zero. 
.1.3.6.1.6.3.10.2.1.4,SNMP-FRAMEWORK-MIB::snmpEngineMaxMessageSize,INTEGER,read-only,,current,,The maximum length in octets of an SNMP message which this SNMP engine can send or receive and process, determined as the minimum of the maximum message size values supported among all of the transports available to and supported by the engine. 
.1.3.6.1.6.3.10.3,SNMP-FRAMEWORK-MIB::snmpFrameworkMIBConformance,,,,,,
.1.3.6.1.6.3.10.3.1,SNMP-FRAMEWORK-MIB::snmpFrameworkMIBCompliances,,,,,,
.1.3.6.1.6.3.10.3.1.1,SNMP-FRAMEWORK-MIB::snmpFrameworkMIBCompliance,,,,,,The compliance statement for SNMP engines which implement the SNMP Management Framework MIB. 
.1.3.6.1.6.3.10.3.2,SNMP-FRAMEWORK-MIB::snmpFrameworkMIBGroups,,,,,,
.1.3.6.1.6.3.10.3.2.1,SNMP-FRAMEWORK-MIB::snmpEngineGroup,,,,,,A collection of objects for identifying and determining the configuration and current timeliness values of an SNMP engine. 
.1.3.6.1.6.3.12,SNMP-TARGET-MIB::snmpTargetMIB,,,,,,This MIB module defines MIB objects which provide mechanisms to remotely configure the parameters used by an SNMP entity for the generation of SNMP messages. Copyright (C) The Internet Society (2002). This version of this MIB module is part of RFC 3413; see the RFC itself for full legal notices. 
.1.3.6.1.6.3.12.1,SNMP-TARGET-MIB::snmpTargetObjects,,,,,,
.1.3.6.1.6.3.12.1.1,SNMP-TARGET-MIB::snmpTargetSpinLock,INTEGER,read-write,,current,,This object is used to facilitate modification of table entries in the SNMP-TARGET-MIB module by multiple managers. In particular, it is useful when modifying the value of the snmpTargetAddrTagList object. The procedure for modifying the snmpTargetAddrTagList object is as follows: 1. Retrieve the value of snmpTargetSpinLock and of snmpTargetAddrTagList. 2. Generate a new value for snmpTargetAddrTagList. 3. Set the value of snmpTargetSpinLock to the retrieved value, and the value of snmpTargetAddrTagList to the new value. If the set fails for the snmpTargetSpinLock object, go back to step 1.
.1.3.6.1.6.3.12.1.2,SNMP-TARGET-MIB::snmpTargetAddrTable,,not-accessible,,current,,A table of transport addresses to be used in the generation of SNMP messages.
.1.3.6.1.6.3.12.1.2.1,SNMP-TARGET-MIB::snmpTargetAddrEntry,,not-accessible,IMPLIEDsnmpTargetAddrName,current,,A transport address to be used in the generation of SNMP operations. Entries in the snmpTargetAddrTable are created and deleted using the snmpTargetAddrRowStatus object.
.1.3.6.1.6.3.12.1.2.1.1,SNMP-TARGET-MIB::snmpTargetAddrName,OCTET,not-accessible,,current,,The locally arbitrary, but unique identifier associated with this snmpTargetAddrEntry.
.1.3.6.1.6.3.12.1.2.1.2,SNMP-TARGET-MIB::snmpTargetAddrTDomain,OBJECT,read-create,,current,,This object indicates the transport type of the address contained in the snmpTargetAddrTAddress object.
.1.3.6.1.6.3.12.1.2.1.3,SNMP-TARGET-MIB::snmpTargetAddrTAddress,OCTET,read-create,,current,,This object contains a transport address. The format of this address depends on the value of the snmpTargetAddrTDomain object.
.1.3.6.1.6.3.12.1.2.1.4,SNMP-TARGET-MIB::snmpTargetAddrTimeout,INTEGER,read-create,,current,,This object should reflect the expected maximum round trip time for communicating with the transport address defined by this row. When a message is sent to this address, and a response (if one is expected) is not received within this time period, an implementation may assume that the response will not be delivered. Note that the time interval that an application waits for a response may actually be derived from the value of this object. The method for deriving the actual time interval is implementation dependent. One such method is to derive the expected round trip time based on a particular retransmission algorithm and on the number of timeouts which have occurred. The type of message may also be considered when deriving expected round trip times for retransmissions. For example, if a message is being sent with a securityLevel that indicates both authentication and privacy, the derived value may be increased to compensate for extra processing time spent during authentication and encryption processing.
.1.3.6.1.6.3.12.1.2.1.5,SNMP-TARGET-MIB::snmpTargetAddrRetryCount,Integer32,read-create,,current,,This object specifies a default number of retries to be attempted when a response is not received for a generated message. An application may provide its own retry count, in which case the value of this object is ignored.
.1.3.6.1.6.3.12.1.2.1.6,SNMP-TARGET-MIB::snmpTargetAddrTagList,OCTET,read-create,,current,,This object contains a list of tag values which are used to select target addresses for a particular operation.
.1.3.6.1.6.3.12.1.2.1.7,SNMP-TARGET-MIB::snmpTargetAddrParams,OCTET,read-create,,current,,The value of this object identifies an entry in the snmpTargetParamsTable. The identified entry contains SNMP parameters to be used when generating messages to be sent to this transport address.
.1.3.6.1.6.3.12.1.2.1.8,SNMP-TARGET-MIB::snmpTargetAddrStorageType,INTEGER,read-create,,current,other(1):volatile(2):nonVolatile(3):permanent(4):readOnly(5),The storage type for this conceptual row. Conceptual rows having the value 'permanent' need not allow write-access to any columnar objects in the row.
.1.3.6.1.6.3.12.1.2.1.9,SNMP-TARGET-MIB::snmpTargetAddrRowStatus,INTEGER,read-create,,current,active(1):notInService(2):notReady(3):createAndGo(4):createAndWait(5):destroy(6),The status of this conceptual row. To create a row in this table, a manager must set this object to either createAndGo(4) or createAndWait(5). Until instances of all corresponding columns are appropriately configured, the value of the corresponding instance of the snmpTargetAddrRowStatus column is 'notReady'. In particular, a newly created row cannot be made active until the corresponding instances of snmpTargetAddrTDomain, snmpTargetAddrTAddress, and snmpTargetAddrParams have all been set. The following objects may not be modified while the value of this object is active(1): - snmpTargetAddrTDomain - snmpTargetAddrTAddress An attempt to set these objects while the value of snmpTargetAddrRowStatus is active(1) will result in an inconsistentValue error.
.1.3.6.1.6.3.12.1.3,SNMP-TARGET-MIB::snmpTargetParamsTable,,not-accessible,,current,,A table of SNMP target information to be used in the generation of SNMP messages.
.1.3.6.1.6.3.12.1.3.1,SNMP-TARGET-MIB::snmpTargetParamsEntry,,not-accessible,IMPLIEDsnmpTargetParamsName,current,,A set of SNMP target information. Entries in the snmpTargetParamsTable are created and deleted using the snmpTargetParamsRowStatus object.
.1.3.6.1.6.3.12.1.3.1.1,SNMP-TARGET-MIB::snmpTargetParamsName,OCTET,not-accessible,,current,,The locally arbitrary, but unique identifier associated with this snmpTargetParamsEntry.
.1.3.6.1.6.3.12.1.3.1.2,SNMP-TARGET-MIB::snmpTargetParamsMPModel,INTEGER,read-create,,current,,The Message Processing Model to be used when generating SNMP messages using this entry.
.1.3.6.1.6.3.12.1.3.1.3,SNMP-TARGET-MIB::snmpTargetParamsSecurityModel,INTEGER,read-create,,current,,The Security Model to be used when generating SNMP messages using this entry. An implementation may choose to return an inconsistentValue error if an attempt is made to set this variable to a value for a security model which the implementation does not support.
.1.3.6.1.6.3.12.1.3.1.4,SNMP-TARGET-MIB::snmpTargetParamsSecurityName,OCTET,read-create,,current,,The securityName which identifies the Principal on whose behalf SNMP messages will be generated using this entry.
.1.3.6.1.6.3.12.1.3.1.5,SNMP-TARGET-MIB::snmpTargetParamsSecurityLevel,INTEGER,read-create,,current,noAuthNoPriv(1):authNoPriv(2):authPriv(3),The Level of Security to be used when generating SNMP messages using this entry.
.1.3.6.1.6.3.12.1.3.1.6,SNMP-TARGET-MIB::snmpTargetParamsStorageType,INTEGER,read-create,,current,other(1):volatile(2):nonVolatile(3):permanent(4):readOnly(5),The storage type for this conceptual row. Conceptual rows having the value 'permanent' need not allow write-access to any columnar objects in the row.
.1.3.6.1.6.3.12.1.3.1.7,SNMP-TARGET-MIB::snmpTargetParamsRowStatus,INTEGER,read-create,,current,active(1):notInService(2):notReady(3):createAndGo(4):createAndWait(5):destroy(6),The status of this conceptual row. To create a row in this table, a manager must set this object to either createAndGo(4) or createAndWait(5). Until instances of all corresponding columns are appropriately configured, the value of the corresponding instance of the snmpTargetParamsRowStatus column is 'notReady'. In particular, a newly created row cannot be made active until the corresponding snmpTargetParamsMPModel, snmpTargetParamsSecurityModel, snmpTargetParamsSecurityName, and snmpTargetParamsSecurityLevel have all been set. The following objects may not be modified while the value of this object is active(1): - snmpTargetParamsMPModel - snmpTargetParamsSecurityModel - snmpTargetParamsSecurityName - snmpTargetParamsSecurityLevel An attempt to set these objects while the value of snmpTargetParamsRowStatus is active(1) will result in an inconsistentValue error.
.1.3.6.1.6.3.12.1.4,SNMP-TARGET-MIB::snmpUnavailableContexts,Counter32,read-only,,current,,The total number of packets received by the SNMP engine which were dropped because the context contained in the message was unavailable.
.1.3.6.1.6.3.12.1.5,SNMP-TARGET-MIB::snmpUnknownContexts,Counter32,read-only,,current,,The total number of packets received by the SNMP engine which were dropped because the context contained in the message was unknown.
.1.3.6.1.6.3.12.3,SNMP-TARGET-MIB::snmpTargetConformance,,,,,,
.1.3.6.1.6.3.12.3.1,SNMP-TARGET-MIB::snmpTargetCompliances,,,,,,
.1.3.6.1.6.3.12.3.1.1,SNMP-TARGET-MIB::snmpTargetCommandResponderCompliance,,,,,,The compliance statement for SNMP entities which include a command responder application.
.1.3.6.1.6.3.12.3.2,SNMP-TARGET-MIB::snmpTargetGroups,,,,,,
.1.3.6.1.6.3.12.3.2.1,SNMP-TARGET-MIB::snmpTargetBasicGroup,,,,,,A collection of objects providing basic remote configuration of management targets.
.1.3.6.1.6.3.12.3.2.2,SNMP-TARGET-MIB::snmpTargetResponseGroup,,,,,,A collection of objects providing remote configuration of management targets for applications which generate SNMP messages for which a response message would be expected.
.1.3.6.1.6.3.12.3.2.3,SNMP-TARGET-MIB::snmpTargetCommandResponderGroup,,,,,,A collection of objects required for command responder applications, used for counting error conditions.
.1.3.111,IEEE8021-TC-MIB::ieee,,,,,,
.1.3.111.2,IEEE8021-TC-MIB::standards-association-numbers-series-standards,,,,,,
.1.3.111.2.802,IEEE8021-TC-MIB::lan-man-stds,,,,,,
.1.3.111.2.802.1,IEEE8021-TC-MIB::ieee802dot1,,,,,,
.1.3.111.2.802.1.1,IEEE8021-TC-MIB::ieee802dot1mibs,,,,,,
.1.3.111.2.802.1.1.1,IEEE8021-TC-MIB::ieee8021TcMib,,,,,,Textual conventions used throughout the various IEEE 802.1 MIB modules. Unless otherwise indicated, the references in this MIB module are to IEEE Std 802.1Q. Copyright (C) IEEE (2014). This version of this MIB module is part of IEEE Std 802.1Q; see the draft itself for full legal notices.
