.1.3,SNMPv2-SMI::org,,,,,,
.1.3.6,SNMPv2-SMI::dod,,,,,,
.1.3.6.1,SNMPv2-SMI::internet,,,,,,
.1.3.6.1.1,SNMPv2-SMI::directory,,,,,,
.1.3.6.1.2,SNMPv2-SMI::mgmt,,,,,,
.1.3.6.1.2.1,SNMPv2-SMI::mib-2,,,,,,
.1.3.6.1.2.1.10,SNMPv2-SMI::transmission,,,,,,
.1.3.6.1.3,SNMPv2-SMI::experimental,,,,,,
.1.3.6.1.4,SNMPv2-SMI::private,,,,,,
.1.3.6.1.4.1,SNMPv2-SMI::enterprises,,,,,,
.1.3.6.1.4.1.13842,MOBANetClocksV2-MIB::mobatime,,,,,,
.1.3.6.1.4.1.13842.6,MOBANetClocksV2-MIB::mobaNetClocks,,,,,,
.1.3.6.1.4.1.13842.6.2,MOBANetClocksV2-MIB::mobaNetClocksV2,,,,,,
.1.3.6.1.4.1.13842.6.2.1,MOBANetClocksV2-MIB::mbnscNet,,,,,,
.1.3.6.1.4.1.13842.6.2.1.1,MOBANetClocksV2-MIB::mbnscNetGen,,,,,,
.1.3.6.1.4.1.13842.6.2.1.1.1,MOBANetClocksV2-MIB::mbnscNetGenMAC,OCTET,read-only,,current,,MAC-Address (xx xx xx xx xx xx)
.1.3.6.1.4.1.13842.6.2.1.1.2,MOBANetClocksV2-MIB::mbnscNetGenIPMode,INTEGER,read-write,,current,both(0):ipv4only(1):ipv6only(2),IP Mode:  0: IPv4 and IPv6 1: IPv4 only 2: IPv6 only
.1.3.6.1.4.1.13842.6.2.1.1.3,MOBANetClocksV2-MIB::mbnscNetGenIPNameserver,OCTET,read-write,,current,,IPv4 or IPv6 address (xxx.xxx.xxx.xxx or xxxx::xxxx:xxxx)  of the nameserver
.1.3.6.1.4.1.13842.6.2.1.1.4,MOBANetClocksV2-MIB::mbnscNetGenTZClientPort,Unsigned32,read-write,,current,,Timezone client port. Default 65534
.1.3.6.1.4.1.13842.6.2.1.1.5,MOBANetClocksV2-MIB::mbnscNetGenConfigPort,Unsigned32,read-write,,current,,Configuration port. Default 65532
.1.3.6.1.4.1.13842.6.2.1.1.6,MOBANetClocksV2-MIB::mbnscNetGenSnmpMode,Unsigned32,read-only,,current,,SNMP mode disabled 0: SNMP enabled (default)  1: SNMP disabled
.1.3.6.1.4.1.13842.6.2.1.1.7,MOBANetClocksV2-MIB::mbnscNetGenMulticastMode,Unsigned32,read-write,,current,,Multicast mode disabled 0: Multicast enabled (default)  1: Multicast disabled
.1.3.6.1.4.1.13842.6.2.1.1.8,MOBANetClocksV2-MIB::mbnscNetGenHostname,OCTET,read-write,,current,,Host name of the device
.1.3.6.1.4.1.13842.6.2.1.1.9,MOBANetClocksV2-MIB::mbnscNetGenCommMode,Unsigned32,read-only,,current,,Communication / synchronisation mode 0=unicast 1=multicast (only for digital clocks)
.1.3.6.1.4.1.13842.6.2.1.1.10,MOBANetClocksV2-MIB::mbnscNetGenMCastGrpIP,IpAddress,read-write,,current,,IP network address (xxx.xxx.xxx.xxx) of the  (only for digital clocks)
.1.3.6.1.4.1.13842.6.2.1.1.100,MOBANetClocksV2-MIB::mbnscNetGenConfigCmd,Unsigned32,read-write,,current,,Network configuration changed command variable.  0: Not defined 1: SNMP has changed the configuration (possible restart of device) 2: SNMP requests to restore the old configuration
.1.3.6.1.4.1.13842.6.2.1.1.101,MOBANetClocksV2-MIB::mbnscNetGenConfigChangedTime,TimeTicks,read-only,,current,,Time of the last configuration change.
.1.3.6.1.4.1.13842.6.2.1.2,MOBANetClocksV2-MIB::mbnscNetIPv4,,,,,,
.1.3.6.1.4.1.13842.6.2.1.2.1,MOBANetClocksV2-MIB::mbnscNetIPv4Addr,IpAddress,read-write,,current,,IP network address (xxx.xxx.xxx.xxx) of the  network slave clock
.1.3.6.1.4.1.13842.6.2.1.2.2,MOBANetClocksV2-MIB::mbnscNetIPv4Mask,IpAddress,read-write,,current,,IP subnet mask (xxx.xxx.xxx.xxx)
.1.3.6.1.4.1.13842.6.2.1.2.3,MOBANetClocksV2-MIB::mbnscNetIPv4Gateway,IpAddress,read-write,,current,,IP network address (xxx.xxx.xxx.xxx) for the gateway
.1.3.6.1.4.1.13842.6.2.1.2.4,MOBANetClocksV2-MIB::mbnscNetIPv4DHCPMode,Unsigned32,read-write,,current,,DHCP mode 0: DHCP disabled  1: DHCP enabled (default)
.1.3.6.1.4.1.13842.6.2.1.2.100,MOBANetClocksV2-MIB::mbnscNetIPv4ConfigCmd,Unsigned32,read-write,,current,,Network configuration changed command variable.  0: Not defined 1: SNMP has changed the configuration (possible restart of device) 2: SNMP requests to restore the old configuration
.1.3.6.1.4.1.13842.6.2.1.2.101,MOBANetClocksV2-MIB::mbnscNetIPv4ConfigChangedTime,TimeTicks,read-only,,current,,Time of the last configuration change.
.1.3.6.1.4.1.13842.6.2.1.3,MOBANetClocksV2-MIB::mbnscNetIPv6,,,,,,
.1.3.6.1.4.1.13842.6.2.1.3.1,MOBANetClocksV2-MIB::mbnscNetIPv6AddrLocal,OCTET,read-only,,current,,IP V6 link local network address (xxxx:xxxx::xxxx)
.1.3.6.1.4.1.13842.6.2.1.3.2,MOBANetClocksV2-MIB::mbnscNetIPv6AddrAuto,OCTET,read-only,,current,,IP V6 network address by autoconfig (xxxx:xxxx::xxxx)
.1.3.6.1.4.1.13842.6.2.1.3.3,MOBANetClocksV2-MIB::mbnscNetIPv6AddrDHCP,OCTET,read-only,,current,,IP V6 network address by DHCPv6 (xxxx:xxxx::xxxx)
.1.3.6.1.4.1.13842.6.2.1.3.4,MOBANetClocksV2-MIB::mbnscNetIPv6AddrFix,OCTET,read-write,,current,,IP V6 network address manual set (xxxx:xxxx::xxxx)
.1.3.6.1.4.1.13842.6.2.1.3.5,MOBANetClocksV2-MIB::mbnscNetIPv6Prefix,Unsigned32,read-write,,current,,IPv6 subnet prefix for manual set IP address
.1.3.6.1.4.1.13842.6.2.1.3.6,MOBANetClocksV2-MIB::mbnscNetIPv6Gateway,OCTET,read-only,,current,,IP V6 network address of gateway (next hop) (xxxx:xxxx::xxxx)
.1.3.6.1.4.1.13842.6.2.1.3.7,MOBANetClocksV2-MIB::mbnscNetIPv6Config,INTEGER,read-write,,current,both(0):autoonly(1):dhcpv6only(2):none(3),Mode of IPv6 adress configuration 0: auto and fixed  1: autoconfig only 2: DHCPv6 only 3: none
.1.3.6.1.4.1.13842.6.2.1.3.100,MOBANetClocksV2-MIB::mbnscNetIPv6ConfigCmd,Unsigned32,read-write,,current,,Network configuration changed command variable.  0: Not defined 1: SNMP has changed the configuration (possible restart of device) 2: SNMP requests to restore the old configuration
.1.3.6.1.4.1.13842.6.2.1.3.101,MOBANetClocksV2-MIB::mbnscNetIPv6ConfigChangedTime,TimeTicks,read-only,,current,,Time of the last configuration change.
.1.3.6.1.4.1.13842.6.2.2,MOBANetClocksV2-MIB::mbnscTime,,,,,,
.1.3.6.1.4.1.13842.6.2.2.1,MOBANetClocksV2-MIB::mbnscTimeNTP1,OCTET,read-write,,current,,String with IPv4 or IPv6 address (192.168.3.4 or  FD03:2345:2345:2345::231) or DNS name to  get NTP time information.
.1.3.6.1.4.1.13842.6.2.2.2,MOBANetClocksV2-MIB::mbnscTimeNTP2,OCTET,read-write,,current,,String with IPv4 or IPv6 address (192.168.3.4 or  FD03:2345:2345:2345::231) or DNS name to  get NTP time information.
.1.3.6.1.4.1.13842.6.2.2.3,MOBANetClocksV2-MIB::mbnscTimeNTP3,OCTET,read-write,,current,,String with IPv4 or IPv6 address (192.168.3.4 or  FD03:2345:2345:2345::231) or DNS name to  get NTP time information.
.1.3.6.1.4.1.13842.6.2.2.4,MOBANetClocksV2-MIB::mbnscTimeNTP4,OCTET,read-write,,current,,String with IPv4 or IPv6 address (192.168.3.4 or  FD03:2345:2345:2345::231) or DNS name to  get NTP time information.
.1.3.6.1.4.1.13842.6.2.2.5,MOBANetClocksV2-MIB::mbnscTimeNTPcurrent,OCTET,read-only,,current,,IPv4 or IPv6 address of current NTP server
.1.3.6.1.4.1.13842.6.2.2.6,MOBANetClocksV2-MIB::mbnscTimeNTPpollIntervall,Unsigned32,read-write,,current,,NTP request intervall 10..999sec
.1.3.6.1.4.1.13842.6.2.2.7,MOBANetClocksV2-MIB::mbnscTimeDeviceTime,Unsigned32,read-only,,current,,Actual device time (UTC).  Seconds since 1.1.1970 00:00:00
.1.3.6.1.4.1.13842.6.2.2.8,MOBANetClocksV2-MIB::mbnscTimeLocOffset,Integer32,read-only,,current,,Offset to localt time in minutes  (-720..720)
.1.3.6.1.4.1.13842.6.2.2.9,MOBANetClocksV2-MIB::mbnscTimeLastReception,Unsigned32,read-only,,current,,Last received time (UTC).  Seconds since 1.1.1970 00:00:00
.1.3.6.1.4.1.13842.6.2.2.100,MOBANetClocksV2-MIB::mbnscTimeConfigCmd,Unsigned32,read-write,,current,,Time configuration changed command variable.  0: Not defined 1: SNMP has changed the configuration (possible restart of device) 2: SNMP requests to restore the old configuration
.1.3.6.1.4.1.13842.6.2.2.101,MOBANetClocksV2-MIB::mbnscTimeConfigChangedTime,TimeTicks,read-only,,current,,Time of the last configuration change.
.1.3.6.1.4.1.13842.6.2.3,MOBANetClocksV2-MIB::mbnscTimeZone,,,,,,
.1.3.6.1.4.1.13842.6.2.3.1,MOBANetClocksV2-MIB::mbnscTimeZoneVersion,Integer32,read-only,,current,,Actual version internal time zone table
.1.3.6.1.4.1.13842.6.2.3.2,MOBANetClocksV2-MIB::mbnscTimeZoneNumber,Integer32,read-write,,current,,Time zone  0: UTC 1..64: See user manual, time zone table 65..128: user defined time zone 129..143: time zone server 1..15 254: automatic time zone - e.g. UTC 255: internal user defined time zone (SET only used for digital clocks)
.1.3.6.1.4.1.13842.6.2.3.3,MOBANetClocksV2-MIB::mbnscTimeZoneEntry1,OCTET,read-only,,current,,Time Zone entry -> see special definition
.1.3.6.1.4.1.13842.6.2.3.4,MOBANetClocksV2-MIB::mbnscTimeZoneEntry2,OCTET,read-only,,current,,Time Zone entry -> see special definition
.1.3.6.1.4.1.13842.6.2.3.5,MOBANetClocksV2-MIB::mbnscTimeZoneEntry3,OCTET,read-only,,current,,Time Zone entry -> see special definition
.1.3.6.1.4.1.13842.6.2.3.6,MOBANetClocksV2-MIB::mbnscTimeZoneEntry4,OCTET,read-only,,current,,Time Zone entry -> see special definition
.1.3.6.1.4.1.13842.6.2.3.7,MOBANetClocksV2-MIB::mbnscTimeZoneEntry5,OCTET,read-only,,current,,Time Zone entry -> see special definition
.1.3.6.1.4.1.13842.6.2.3.8,MOBANetClocksV2-MIB::mbnscTimeZoneEntry6,OCTET,read-only,,current,,Time Zone entry -> see special definition
.1.3.6.1.4.1.13842.6.2.3.9,MOBANetClocksV2-MIB::mbnscTimeZoneEntry7,OCTET,read-only,,current,,Time Zone entry -> see special definition
.1.3.6.1.4.1.13842.6.2.3.100,MOBANetClocksV2-MIB::mbnscTimeZoneConfigCmd,Unsigned32,read-write,,current,,Time zone configuration changed command variable.  0: Not defined 1: SNMP has changed the configuration (possible restart of device) 2: SNMP requests to restore the old configuration
.1.3.6.1.4.1.13842.6.2.3.101,MOBANetClocksV2-MIB::mbnscTimeZoneConfigChangedTime,TimeTicks,read-only,,current,,Time of the last configuration change.
.1.3.6.1.4.1.13842.6.2.4,MOBANetClocksV2-MIB::mbnscMode,,,,,,
.1.3.6.1.4.1.13842.6.2.4.1,MOBANetClocksV2-MIB::mbnscModeSwitchInfo,Integer32,read-only,,current,,Current switch settings (only analogue movements)
.1.3.6.1.4.1.13842.6.2.4.2,MOBANetClocksV2-MIB::mbnscModeDisplayBrightness,OCTET,read-write,,current,,Display brightness for digital clocks 1..30, A (Auto)
.1.3.6.1.4.1.13842.6.2.4.3,MOBANetClocksV2-MIB::mbnscModeDisplayFormat,OCTET,read-write,,current,,Display format 12h/24h for digital clocks
.1.3.6.1.4.1.13842.6.2.4.4,MOBANetClocksV2-MIB::mbnscModeDisplayAlternate,OCTET,read-write,,current,,Display alternating mode for digital clocks 1: time continuously 2: date cont. 3: temperature cont. (sequence 6 sec. time, 3 sec. date for ECO-DC) 4: stopwatch cont. (only DC clock) 5: sequence 6 sec. time, 3 sec. date (only DC clock) 6: sequence 8 sec. time, 3 sec. date, 3 sec. temperature (only DC clock)
.1.3.6.1.4.1.13842.6.2.4.5,MOBANetClocksV2-MIB::mbnscModeNTP,OCTET,not-accessible,,obsolete,,NTP synchronisation mode for digital clocks
.1.3.6.1.4.1.13842.6.2.4.6,MOBANetClocksV2-MIB::mbnscModeIRlock,OCTET,read-write,,current,,IR autolock time for digital clocks (only DC clock) 1..60, U (autolock off)
.1.3.6.1.4.1.13842.6.2.4.7,MOBANetClocksV2-MIB::mbnscModeTimeDispZeros,OCTET,read-write,,current,,Leading zeros time display for digital clocks (only DC clock) 1: time with leading zero 2: time without leading zero
.1.3.6.1.4.1.13842.6.2.4.8,MOBANetClocksV2-MIB::mbnscModeDateDispZeros,OCTET,read-write,,current,,Leading zeros date display for digital clocks (only DC clock) 1: date with leading zero 2: date without leading zero
.1.3.6.1.4.1.13842.6.2.4.9,MOBANetClocksV2-MIB::mbnscModeTempUnit,OCTET,read-write,,current,,Temperature unit for digital clocks (only DC clock) C: Celsius F: Fahrenheit
.1.3.6.1.4.1.13842.6.2.4.10,MOBANetClocksV2-MIB::mbnscModeClockOpMode,OCTET,read-write,,current,,Operation mode for digital clocks (only DC clock) 0: normal mode 1: special mode 1 2: special mode 2
.1.3.6.1.4.1.13842.6.2.4.11,MOBANetClocksV2-MIB::mbnscModeNWParam,OCTET,not-accessible,,obsolete,,Network parameter setting mode for digital clocks
.1.3.6.1.4.1.13842.6.2.4.12,MOBANetClocksV2-MIB::mbnscModeDispDerating,OCTET,read-write,,current,,Display current deration setting for digital clocks (see service menu definition)
.1.3.6.1.4.1.13842.6.2.4.13,MOBANetClocksV2-MIB::mbnscModeLightCorr,OCTET,read-write,,current,,Light measurement correction for digital clocks (see service menu definition)
.1.3.6.1.4.1.13842.6.2.4.30,MOBANetClocksV2-MIB::mbnscAdditionalDigitalClockModes,,,,,,
.1.3.6.1.4.1.13842.6.2.4.30.1,MOBANetClocksV2-MIB::mbnscSensors,,,,,,
.1.3.6.1.4.1.13842.6.2.4.30.1.1,MOBANetClocksV2-MIB::mbnscSensorsTempActivation,OCTET,read-write,,current,,Temperature sensor activation 1: DS18B20 3: TME (only sensor 1) 4: TME (Sensors 1 and 2)
.1.3.6.1.4.1.13842.6.2.4.30.1.2,MOBANetClocksV2-MIB::mbnscSensorsTemp1IPAddr,IpAddress,read-write,,current,,IP network address (xxx.xxx.xxx.xxx) of the  sensor 1
.1.3.6.1.4.1.13842.6.2.4.30.1.3,MOBANetClocksV2-MIB::mbnscSensorsTemp2IPAddr,IpAddress,read-write,,current,,IP network address (xxx.xxx.xxx.xxx) of the  sensor 2
.1.3.6.1.4.1.13842.6.2.4.30.1.100,MOBANetClocksV2-MIB::mbnscSensorsConfigCmd,Unsigned32,read-write,,current,,Mode configuration changed command variable. 0: Not defined 1: SNMP has changed the configuration (possible restart of device) 2: SNMP requests to restore the old configuration
.1.3.6.1.4.1.13842.6.2.4.30.1.101,MOBANetClocksV2-MIB::mbnscSensorsConfigChangedTime,TimeTicks,read-only,,current,,Time of the last configuration change.
.1.3.6.1.4.1.13842.6.2.4.30.2,MOBANetClocksV2-MIB::mbnscDA,,,,,,
.1.3.6.1.4.1.13842.6.2.4.30.2.1,MOBANetClocksV2-MIB::mbnscDASecondCircleDisplay,OCTET,read-write,,current,,The second circle display mode 1: Accumulating ring of seconds marker 2: Take actual second from full shining circle step by step 3: Full shining circle, actual second off 4: Three shining seconds, the first is showing actual second 5: Two shining seconds, the first is showing actual second
.1.3.6.1.4.1.13842.6.2.4.30.2.100,MOBANetClocksV2-MIB::mbnscDAConfigCmd,Unsigned32,read-write,,current,,Mode configuration changed command variable. 0: Not defined 1: SNMP has changed the configuration (possible restart of device) 2: SNMP requests to restore the old configuration
.1.3.6.1.4.1.13842.6.2.4.30.2.101,MOBANetClocksV2-MIB::mbnscDAConfigChangedTime,TimeTicks,read-only,,current,,Time of the last configuration change.
.1.3.6.1.4.1.13842.6.2.4.30.3,MOBANetClocksV2-MIB::mbnscDK,,,,,,
.1.3.6.1.4.1.13842.6.2.4.30.3.1,MOBANetClocksV2-MIB::mbnscDKFirstLanguage,OCTET,read-write,,current,,First language selection 1: Czech 2: Slovak 3: English 4: German 5: ... (see manual for full language list)
.1.3.6.1.4.1.13842.6.2.4.30.3.2,MOBANetClocksV2-MIB::mbnscDKSecondLanguage,OCTET,read-write,,current,,Second language selection 1: Czech 2: Slovak 3: English 4: German 5: ... (see manual for full language list)
.1.3.6.1.4.1.13842.6.2.4.30.3.3,MOBANetClocksV2-MIB::mbnscDKThirdLanguage,OCTET,read-write,,current,,Third language selection 1: Czech 2: Slovak 3: English 4: German 5: ... (see manual for full language list)
.1.3.6.1.4.1.13842.6.2.4.30.3.4,MOBANetClocksV2-MIB::mbnscDKTempUnitSecondLang,OCTET,read-write,,current,,Temperature units for second selected language C: Celsius F: Fahrenheit
.1.3.6.1.4.1.13842.6.2.4.30.3.5,MOBANetClocksV2-MIB::mbnscDKTempUnitThirdLang,OCTET,read-write,,current,,Temperature units for third selected language C: Celsius F: Fahrenheit
.1.3.6.1.4.1.13842.6.2.4.30.3.6,MOBANetClocksV2-MIB::mbnscDKAutoLangSwitchOver,OCTET,read-write,,current,,Language switch mode for automatic language  A: all languages S: simple language
.1.3.6.1.4.1.13842.6.2.4.30.3.7,MOBANetClocksV2-MIB::mbnscDKNumOfCharsForWeekday,OCTET,read-write,,current,,Number of characters used for weekday names 2: two characters 3: three characters
.1.3.6.1.4.1.13842.6.2.4.30.3.8,MOBANetClocksV2-MIB::mbnscDKNamesFormatDisplay,OCTET,read-write,,current,,Weekday and month display format 1: first capital 2: all capitals
.1.3.6.1.4.1.13842.6.2.4.30.3.9,MOBANetClocksV2-MIB::mbnscDKTemp1DescriptEnable,OCTET,read-write,,current,,Display of description for first measured temperature N/Y
.1.3.6.1.4.1.13842.6.2.4.30.3.10,MOBANetClocksV2-MIB::mbnscDKTemp1Description,OCTET,read-write,,current,,Description text for first measured temperature
.1.3.6.1.4.1.13842.6.2.4.30.3.11,MOBANetClocksV2-MIB::mbnscDKTemp2DescriptEnable,OCTET,read-write,,current,,Display of description for second measured temperature N/Y
.1.3.6.1.4.1.13842.6.2.4.30.3.12,MOBANetClocksV2-MIB::mbnscDKTemp2Description,OCTET,read-write,,current,,Description text for second measured temperature
.1.3.6.1.4.1.13842.6.2.4.30.3.13,MOBANetClocksV2-MIB::mbnscDKWorldTimeZone1,Integer32,read-write,,current,,Index of time zone for world time zone 1  0: UTC 1..64: See user manual, time zone table 65..128: user defined time zone 129..143: time zone server 1..15 255: none (SET only used for digital clocks)
.1.3.6.1.4.1.13842.6.2.4.30.3.14,MOBANetClocksV2-MIB::mbnscDKWorldTimeZone1Description,OCTET,read-write,,current,,Description text for World time zone 1
.1.3.6.1.4.1.13842.6.2.4.30.3.15,MOBANetClocksV2-MIB::mbnscDKWorldTimeZone2,Integer32,read-write,,current,,Index of time zone for world time zone 2  0: UTC 1..64: See user manual, time zone table 65..128: user defined time zone 129..143: time zone server 1..15 255: none (SET only used for digital clocks)
.1.3.6.1.4.1.13842.6.2.4.30.3.16,MOBANetClocksV2-MIB::mbnscDKWorldTimeZone2Description,OCTET,read-write,,current,,Description text for World time zone 2
.1.3.6.1.4.1.13842.6.2.4.30.3.17,MOBANetClocksV2-MIB::mbnscDKWorldTimeZone3,Integer32,read-write,,current,,Index of time zone for world time zone 3  0: UTC 1..64: See user manual, time zone table 65..128: user defined time zone 129..143: time zone server 1..15 255: none (SET only used for digital clocks)
.1.3.6.1.4.1.13842.6.2.4.30.3.18,MOBANetClocksV2-MIB::mbnscDKWorldTimeZone3Description,OCTET,read-write,,current,,Description text for World time zone 3
.1.3.6.1.4.1.13842.6.2.4.30.3.19,MOBANetClocksV2-MIB::mbnscDKWorldTimeZone4,Integer32,read-write,,current,,Index of time zone for world time zone 4  0: UTC 1..64: See user manual, time zone table 65..128: user defined time zone 129..143: time zone server 1..15 255: none (SET only used for digital clocks)
.1.3.6.1.4.1.13842.6.2.4.30.3.20,MOBANetClocksV2-MIB::mbnscDKWorldTimeZone4Description,OCTET,read-write,,current,,Description text for World time zone 4
.1.3.6.1.4.1.13842.6.2.4.30.3.21,MOBANetClocksV2-MIB::mbnscDKWorldTimeZone5,Integer32,read-write,,current,,Index of time zone for world time zone 5  0: UTC 1..64: See user manual, time zone table 65..128: user defined time zone 129..143: time zone server 1..15 255: none (SET only used for digital clocks)
.1.3.6.1.4.1.13842.6.2.4.30.3.22,MOBANetClocksV2-MIB::mbnscDKWorldTimeZone5Description,OCTET,read-write,,current,,Description text for World time zone 5
.1.3.6.1.4.1.13842.6.2.4.30.3.23,MOBANetClocksV2-MIB::mbnscDKAutoTimeZoneSwitchOver,OCTET,read-write,,current,,World time switch mode for automatic time zone A: all world time zones S: simple world time zone
.1.3.6.1.4.1.13842.6.2.4.30.3.100,MOBANetClocksV2-MIB::mbnscDKConfigCmd,Unsigned32,read-write,,current,,Mode configuration changed command variable. 0: Not defined 1: SNMP has changed the configuration (possible restart of device) 2: SNMP requests to restore the old configuration
.1.3.6.1.4.1.13842.6.2.4.30.3.101,MOBANetClocksV2-MIB::mbnscDKConfigChangedTime,TimeTicks,read-only,,current,,Time of the last configuration change.
.1.3.6.1.4.1.13842.6.2.4.40,MOBANetClocksV2-MIB::mbnscAdditionalInterfaceModes,,,,,,
.1.3.6.1.4.1.13842.6.2.4.40.1,MOBANetClocksV2-MIB::mbnscNMI,,,,,,
.1.3.6.1.4.1.13842.6.2.4.40.1.1,MOBANetClocksV2-MIB::mbnscNMIDCFCurrentLoop,INTEGER,read-write,,current,off(0):on(1),Operation mode of the DCF77 current loop.  0: OFF  1: ON
.1.3.6.1.4.1.13842.6.2.4.40.1.2,MOBANetClocksV2-MIB::mbnscNMILineDriver,INTEGER,read-write,,current,off(0):mobaline(1):activdcf(2),Operation mode of the line driver.  0: OFF  1: MOBALine 2: Active DCF
.1.3.6.1.4.1.13842.6.2.4.40.1.3,MOBANetClocksV2-MIB::mbnscNMIMOBALineMode,INTEGER,read-write,,current,normal(0):command12h(1):clockidcommand(2),Operation mode of MOBALine.  0: normal operation 1: 12:00 mode, sideclocks shows 12:00 position 2: clock-id mode, sideclocks shows their ids if configured
.1.3.6.1.4.1.13842.6.2.4.40.1.4,MOBANetClocksV2-MIB::mbnscNMIMOBALineMinuteHandMode,INTEGER,read-write,,current,minutestep(0):halfminutestep(1):continuous(2),Minute hand mode operation of MOBALine.  0: minute step mode 1: half minute step mode 2: continuous mode
.1.3.6.1.4.1.13842.6.2.4.40.1.5,MOBANetClocksV2-MIB::mbnscNMIActiveDCFMode,INTEGER,read-write,,current,mode1(1):mode2(2):mode3(3):mode4(4):mode5(5):mode6(6),Operation mode of Active DCF.  1: Mode 1 2: Mode 2  3: Mode 3  4: Mode 4 5: Mode 5 6: Mode 6
.1.3.6.1.4.1.13842.6.2.4.40.1.20,MOBANetClocksV2-MIB::mbnscNMISideClockState,,,,,,
.1.3.6.1.4.1.13842.6.2.4.40.1.20.1,MOBANetClocksV2-MIB::mbnscNMISideClock1,INTEGER,read-only,,current,notconfigured(0):clockok(3):clockerror(5),State of side clock 1  0: Clock not configured  3: Clock OK 5: Clock error
.1.3.6.1.4.1.13842.6.2.4.40.1.20.2,MOBANetClocksV2-MIB::mbnscNMISideClock2,INTEGER,read-only,,current,notconfigured(0):clockok(3):clockerror(5),State of side clock 2  0: Clock not configured  3: Clock OK 5: Clock error
.1.3.6.1.4.1.13842.6.2.4.40.1.20.3,MOBANetClocksV2-MIB::mbnscNMISideClock3,INTEGER,read-only,,current,notconfigured(0):clockok(3):clockerror(5),State of side clock 3  0: Clock not configured  3: Clock OK 5: Clock error
.1.3.6.1.4.1.13842.6.2.4.40.1.20.4,MOBANetClocksV2-MIB::mbnscNMISideClock4,INTEGER,read-only,,current,notconfigured(0):clockok(3):clockerror(5),State of side clock 4 0: Clock not configured  3: Clock OK 5: Clock error
.1.3.6.1.4.1.13842.6.2.4.40.1.20.5,MOBANetClocksV2-MIB::mbnscNMISideClock5,INTEGER,read-only,,current,notconfigured(0):clockok(3):clockerror(5),State of side clock 5 0: Clock not configured  3: Clock OK 5: Clock error
.1.3.6.1.4.1.13842.6.2.4.40.1.20.6,MOBANetClocksV2-MIB::mbnscNMISideClock6,INTEGER,read-only,,current,notconfigured(0):clockok(3):clockerror(5),State of side clock 6 0: Clock not configured  3: Clock OK 5: Clock error
.1.3.6.1.4.1.13842.6.2.4.40.1.20.7,MOBANetClocksV2-MIB::mbnscNMISideClock7,INTEGER,read-only,,current,notconfigured(0):clockok(3):clockerror(5),State of side clock 7 0: Clock not configured  3: Clock OK 5: Clock error
.1.3.6.1.4.1.13842.6.2.4.40.1.20.8,MOBANetClocksV2-MIB::mbnscNMISideClock8,INTEGER,read-only,,current,notconfigured(0):clockok(3):clockerror(5),State of side clock 8 0: Clock not configured  3: Clock OK 5: Clock error
.1.3.6.1.4.1.13842.6.2.4.40.1.20.9,MOBANetClocksV2-MIB::mbnscNMISideClock9,INTEGER,read-only,,current,notconfigured(0):clockok(3):clockerror(5),State of side clock 9 0: Clock not configured  3: Clock OK 5: Clock error
.1.3.6.1.4.1.13842.6.2.4.40.1.20.10,MOBANetClocksV2-MIB::mbnscNMISideClock10,INTEGER,read-only,,current,notconfigured(0):clockok(3):clockerror(5),State of side clock 10 0: Clock not configured  3: Clock OK 5: Clock error
.1.3.6.1.4.1.13842.6.2.4.40.1.20.11,MOBANetClocksV2-MIB::mbnscNMISideClock11,INTEGER,read-only,,current,notconfigured(0):clockok(3):clockerror(5),State of side clock 11 0: Clock not configured  3: Clock OK 5: Clock error
.1.3.6.1.4.1.13842.6.2.4.40.1.20.12,MOBANetClocksV2-MIB::mbnscNMISideClock12,INTEGER,read-only,,current,notconfigured(0):clockok(3):clockerror(5),State of side clock 12 0: Clock not configured  3: Clock OK 5: Clock error
.1.3.6.1.4.1.13842.6.2.4.40.1.100,MOBANetClocksV2-MIB::mbnscNMIConfigCmd,Unsigned32,read-write,,current,,General configuration changed command variable. 0: Not defined 1: SNMP has changed the configuration (possible restart of device) 2: SNMP requests to restore the old configuration
.1.3.6.1.4.1.13842.6.2.4.40.1.101,MOBANetClocksV2-MIB::mbnscNMIConfigChangedTime,TimeTicks,read-only,,current,,Time of the last configuration change.
.1.3.6.1.4.1.13842.6.2.4.100,MOBANetClocksV2-MIB::mbnscModeConfigCmd,Unsigned32,read-write,,current,,Mode configuration changed command variable. 0: Not defined 1: SNMP has changed the configuration (possible restart of device) 2: SNMP requests to restore the old configuration
.1.3.6.1.4.1.13842.6.2.4.101,MOBANetClocksV2-MIB::mbnscModeConfigChangedTime,TimeTicks,read-only,,current,,Time of the last configuration change.
.1.3.6.1.4.1.13842.6.2.5,MOBANetClocksV2-MIB::mbnscGeneral,,,,,,
.1.3.6.1.4.1.13842.6.2.5.1,MOBANetClocksV2-MIB::mbnscGeneralType,Integer32,read-only,,current,,Network slave clock type  1 Network Clock Interface NCI 2 Wireless Time Distribution WTD 868-T 3 NTP movement SEN 00 4 NTP movement NBU 190 5 Digital Clock ECO-DC 6 Digital Clock DC3 7 NTP movement SEN 40 8 NTP movement SAN 40 9 NTP digital clock DA 10 NTP calendar digital clock DK2 11 Network MOBALine Interface NMI 12 NTP clock TREND 13 NTP clock TREND double sided 14 NTP in- and outdoor digital clock DSC
.1.3.6.1.4.1.13842.6.2.5.2,MOBANetClocksV2-MIB::mbnscGeneralName,OCTET,read-write,,current,,Device name (identifier)
.1.3.6.1.4.1.13842.6.2.5.3,MOBANetClocksV2-MIB::mbnscGeneralFirmwareNumber,OCTET,read-only,,current,,Article number of the firmware.
.1.3.6.1.4.1.13842.6.2.5.4,MOBANetClocksV2-MIB::mbnscGeneralFirmwareVer,OCTET,read-only,,current,,Firmware version.
.1.3.6.1.4.1.13842.6.2.5.5,MOBANetClocksV2-MIB::mbnscGeneralStatus,OCTET,read-only,,current,,Network slave clock status (64bit). Internal state of the network slave clock. Used for maintenance only. Bit 00 : time ok Bit 01 : 12h position Bit 02 : Reserved Bit 03 : Reserved Bit 04 : Reserved Bit 05 : Reserved Bit 06 : Reserved Bit 07 : Reserved Bit 08 : Reserved Bit 09 : Reserved Bit 10 : Reserved Bit 11 : Reserved  Bit 12 : Reserved Bit 13 : Reserved Bit 14 : Reserved  Bit 15 : Reserved  Bit 16 : Reserved  Bit 17 : Reserved  Bit 18 : Reserved  Bit 19 : Reserved  Bit 20 : Reserved  Bit 21 : Reserved  Bit 22 : Reserved Bit 23 : Reserved Bit 24 : Reserved Bit 25 : Reserved Bit 26 : Reserved Bit 27 : Reserved Bit 28 : Reserved Bit 29 : Reserved Bit 30 : Reserved  Bit 31 : Reserved Bit32..63 not used
.1.3.6.1.4.1.13842.6.2.5.6,MOBANetClocksV2-MIB::mbnscGeneralAlarms,OCTET,read-only,,current,,Alarm state of the network slave clock Bit00=Synchronization Bit01=Power supply Bit02=Slave (cascade) Bit03=Illumination Bit04=Hands position (sec) Bit05=Hands position (m/h) Bit06=Restart Bit07=CommError Bit08=Time zone Bit09=Reserved Bit10=Reserved Bit11=Reserved Bit12=Reserved Bit13=Reserved Bit14=Reserved Bit15=Reserved Bit16=Reserved Bit17=Reserved Bit18=Reserved Bit19=Reserved Bit20=Reserved Bit21=Reserved Bit22=Reserved Bit23=Reserved Bit24=Reserved Bit25=Reserved Bit26=Reserved Bit27=Reserved Bit28=Reserved Bit29=Reserved Bit30=Reserved Bit31=Reserved Bit32..Bit63=Device type specific error
.1.3.6.1.4.1.13842.6.2.5.7,MOBANetClocksV2-MIB::mbnscGeneralSlaveInfo1,OCTET,read-only,,current,,Info from slave 1 Byte 0..5 MAC Byte 6..11 Slave local time Byte 12..17 SW-number Byte 18..21 SW-version Byte 22 state Byte 23 reserved Byte 24 error Byte 25 reserved
.1.3.6.1.4.1.13842.6.2.5.8,MOBANetClocksV2-MIB::mbnscGeneralSlaveInfo2,OCTET,read-only,,current,,Info from slave 2 Byte 0..5 MAC Byte 6..11 Slave local time Byte 12..17 SW-number Byte 18..21 SW-version Byte 22 state Byte 23 reserved Byte 24 error Byte 25 reserved
.1.3.6.1.4.1.13842.6.2.5.9,MOBANetClocksV2-MIB::mbnscGeneralSlaveInfo3,OCTET,read-only,,current,,Info from slave 3 Byte 0..5 MAC Byte 6..11 Slave local time Byte 12..17 SW-number Byte 18..21 SW-version Byte 22 state Byte 23 reserved Byte 24 error Byte 25 reserved
.1.3.6.1.4.1.13842.6.2.5.100,MOBANetClocksV2-MIB::mbnscGeneralConfigCmd,Unsigned32,read-write,,current,,General configuration changed command variable. 0: Not defined 1: SNMP has changed the configuration (possible restart of device) 2: SNMP requests to restore the old configuration
.1.3.6.1.4.1.13842.6.2.5.101,MOBANetClocksV2-MIB::mbnscGeneralConfigChangedTime,TimeTicks,read-only,,current,,Time of the last configuration change.
.1.3.6.1.4.1.13842.6.2.6,MOBANetClocksV2-MIB::mbnscSupervision,,,,,,
.1.3.6.1.4.1.13842.6.2.6.1,MOBANetClocksV2-MIB::mbnscSNMPManager1,OCTET,read-write,,current,,String with IPv4 or IPv6 address (e.g 192.168.3.4  or FD03:2345:2345:2345::231) of the SNMP manager 1
.1.3.6.1.4.1.13842.6.2.6.2,MOBANetClocksV2-MIB::mbnscSNMPManager2,OCTET,read-write,,current,,String with IPv4 or IPv6 address (e.g 192.168.3.4  or FD03:2345:2345:2345::231) of the SNMP manager 2
.1.3.6.1.4.1.13842.6.2.6.3,MOBANetClocksV2-MIB::mbnscSNMPTrapAliveMsgInterval,Unsigned32,read-write,,current,,Time interval to send the alive message to the trap listener stations. 0: Alive message disabled >0: Alive message enabled Range: 1 ... 1440 minutes
.1.3.6.1.4.1.13842.6.2.6.100,MOBANetClocksV2-MIB::mbnscSNMPConfigCmd,Unsigned32,read-write,,current,,SNMP / supervision services configuration changed command variable. 0: Not defined 1: SNMP has changed the configuration (possible restart of device) 2: SNMP requests to restore the old configuration
.1.3.6.1.4.1.13842.6.2.6.101,MOBANetClocksV2-MIB::mbnscSNMPConfigChangedTime,TimeTicks,read-only,,current,,Time of the last configuration change.
.1.3.6.1.4.1.13842.6.2.7,MOBANetClocksV2-MIB::mbnscCommand,,,,,,
.1.3.6.1.4.1.13842.6.2.7.1,MOBANetClocksV2-MIB::mbnscCommand12Pos,Unsigned32,read-write,,current,,Mode of the analogue clock: 0=run, 1=12h position
.1.3.6.1.4.1.13842.6.2.7.2,MOBANetClocksV2-MIB::mbnscCommandSWReset,Unsigned32,read-write,,current,,Command SW reset if set to 1
.1.3.6.1.4.1.13842.6.2.7.3,MOBANetClocksV2-MIB::mbnscCommandFactorySetting,Unsigned32,read-write,,current,,Restore factory settings if set to 1
.1.3.6.1.4.1.13842.6.2.7.4,MOBANetClocksV2-MIB::mbnscCommandFirmwUpd,OCTET,read-only,,current,,Command to start FW update
.1.3.6.1.4.1.13842.6.2.7.5,MOBANetClocksV2-MIB::mbnscCommandExtContact,Integer32,read-only,,current,,Set external contact
.1.3.6.1.4.1.13842.6.2.7.100,MOBANetClocksV2-MIB::mbnscCommandConfigCmd,Unsigned32,read-write,,current,,SNMP / supervision services configuration changed command variable. 0: Not defined 1: SNMP has changed the configuration (possible restart of device) 2: SNMP requests to restore the old configuration
.1.3.6.1.4.1.13842.6.2.9,MOBANetClocksV2-MIB::mbnscSnmpConfig,,,,,,
.1.3.6.1.4.1.13842.6.2.9.1,MOBANetClocksV2-MIB::mbnscSnmpCurrentAlarmInfo,,,,,,
.1.3.6.1.4.1.13842.6.2.9.1.1,MOBANetClocksV2-MIB::mbnscTrapAlMsgErrorNr,Unsigned32,accessible-for-notify,,current,,Error number of the trap message.
.1.3.6.1.4.1.13842.6.2.9.1.2,MOBANetClocksV2-MIB::mbnscTrapAlMsgErrorState,Unsigned32,accessible-for-notify,,current,,Error state of the trap message.
.1.3.6.1.4.1.13842.6.2.9.1.3,MOBANetClocksV2-MIB::mbnscTrapAlMsgErrorTime,Unsigned32,accessible-for-notify,,current,,Error time of the trap message.  Seconds since 1.1.1970 00:00:00
.1.3.6.1.4.1.13842.6.2.10,MOBANetClocksV2-MIB::mbnscTraps,,,,,,
.1.3.6.1.4.1.13842.6.2.10.1,MOBANetClocksV2-MIB::mbnscTrapsAlarm,,,,,,Alarm trap with attached (binded variables) alarm information. mbnscTrapAlMsgErrorNr, mbnscTrapAlMsgErrorState, mbnscTrapAlMsgErrorTime
.1.3.6.1.4.1.13842.6.2.10.2,MOBANetClocksV2-MIB::mbnscTrapsAlive,,,,,,Device alive trap. Will be send in the configured interval. Attached are the variables mbnscGeneralStatus and mbnscGeneralAlarms.
.1.3.6.1.4.1.13842.6.100,MOBANetClocksV2-MIB::mbnscMIB,,,,,,This mib definition is used for all MOBATime network slave clocks.
.1.3.6.1.4.1.13842.6.100.1,MOBANetClocksV2-MIB::mbnscMIBCompliance,,,,,,
.1.3.6.1.4.1.13842.6.100.1.1,MOBANetClocksV2-MIB::mbnscMIBCompliances,,,,,,Please replace this text with your description.
.1.3.6.1.4.1.13842.6.100.2,MOBANetClocksV2-MIB::mbnscMIBGroups,,,,,,
.1.3.6.1.4.1.13842.6.100.2.1,MOBANetClocksV2-MIB::mbnscAllNotifications,,,,,,This automatically created notification group contains all notifications that do not belong to any other NOTIFICATION-GROUP
.1.3.6.1.4.1.13842.6.100.2.2,MOBANetClocksV2-MIB::mbnscGrpNBU190,,,,,,All parameters used for NBU 190 movement
.1.3.6.1.4.1.13842.6.100.2.3,MOBANetClocksV2-MIB::mbnscGrpSEN40,,,,,,All parameters used for SEN 40 movement
.1.3.6.1.4.1.13842.6.100.2.4,MOBANetClocksV2-MIB::mbnscGrpDC,,,,,,All parameters used for DC digital clock
.1.3.6.1.4.1.13842.6.100.2.5,MOBANetClocksV2-MIB::mbnscGrpECODC,,,,,,All parameters used for ECO DC digital clock
.1.3.6.1.4.1.13842.6.100.2.6,MOBANetClocksV2-MIB::mbnscGrpDA,,,,,,All parameters used for DA digital clock
.1.3.6.1.4.1.13842.6.100.2.7,MOBANetClocksV2-MIB::mbnscGrpDK,,,,,,All parameters used for DK digital clock
.1.3.6.1.4.1.13842.6.100.2.8,MOBANetClocksV2-MIB::mbnscGrpNMI,,,,,,All parameters used for Network-MOBALine-Interface NMI
.1.3.6.1.4.1.13842.6.100.2.100,MOBANetClocksV2-MIB::mbnscGrpNotUsedParameters,,,,,,All parameters not used in oother groups
.1.3.6.1.5,SNMPv2-SMI::security,,,,,,
.1.3.6.1.6,SNMPv2-SMI::snmpV2,,,,,,
.1.3.6.1.6.1,SNMPv2-SMI::snmpDomains,,,,,,
.1.3.6.1.6.2,SNMPv2-SMI::snmpProxys,,,,,,
.1.3.6.1.6.3,SNMPv2-SMI::snmpModules,,,,,,
