.1.3,RFC1155-SMI::org,,,,,,
.1.3.6,RFC1155-SMI::dod,,,,,,
.1.3.6.1,RFC1155-SMI::internet,,,,,,
.1.3.6.1.1,RFC1155-SMI::directory,,,,,,
.1.3.6.1.2,RFC1155-SMI::mgmt,,,,,,
.1.3.6.1.2.1,SNMPv2-SMI::mib-2,,,,,,
.1.3.6.1.2.1.1,RFC1213-MIB::system,,,,,,
.1.3.6.1.2.1.1.1,RFC1213-MIB::sysDescr,OCTET,read-only,,mandatory,,A textual description of the entity. This value should include the full name and version identification of the system's hardware type, software operating-system, and networking software. It is mandatory that this only contain printable ASCII characters.
.1.3.6.1.2.1.1.2,RFC1213-MIB::sysObjectID,OBJECT,read-only,,mandatory,,The vendor's authoritative identification of the network management subsystem contained in the entity. This value is allocated within the SMI enterprises subtree (1.3.6.1.4.1) and provides an easy and unambiguous means for determining `what kind of box' is being managed. For example, if vendor `Flintstones, Inc.' was assigned the subtree 1.3.6.1.4.1.4242, it could assign the identifier 1.3.6.1.4.1.4242.1.1 to its `Fred Router'.
.1.3.6.1.2.1.1.3,RFC1213-MIB::sysUpTime,TimeTicks,read-only,,mandatory,,The time (in hundredths of a second) since the network management portion of the system was last re-initialized.
.1.3.6.1.2.1.1.4,RFC1213-MIB::sysContact,OCTET,read-write,,mandatory,,The textual identification of the contact person for this managed node, together with information on how to contact this person.
.1.3.6.1.2.1.1.5,RFC1213-MIB::sysName,OCTET,read-write,,mandatory,,An administratively-assigned name for this managed node. By convention, this is the node's fully-qualified domain name.
.1.3.6.1.2.1.1.6,RFC1213-MIB::sysLocation,OCTET,read-write,,mandatory,,The physical location of this node (e.g., `telephone closet, 3rd floor').
.1.3.6.1.2.1.1.7,RFC1213-MIB::sysServices,INTEGER,read-only,,mandatory,,A value which indicates the set of services that this entity primarily offers. The value is a sum. This sum initially takes the value zero, Then, for each layer, L, in the range 1 through 7, that this node performs transactions for, 2 raised to (L - 1) is added to the sum. For example, a node which performs primarily routing functions would have a value of 4 (2^(3-1)). In contrast, a node which is a host offering application services would have a value of 72 (2^(4-1) + 2^(7-1)). Note that in the context of the Internet suite of protocols, values should be calculated accordingly: layer functionality 1 physical (e.g., repeaters) 2 datalink/subnetwork (e.g., bridges) 3 internet (e.g., IP gateways) 4 end-to-end (e.g., IP hosts) 7 applications (e.g., mail relays) For systems including OSI protocols, layers 5 and 6 may also be counted.
.1.3.6.1.2.1.1.8,SNMPv2-MIB::sysORLastChange,TimeTicks,read-only,,current,,The value of sysUpTime at the time of the most recent change in state or value of any instance of sysORID.
.1.3.6.1.2.1.1.9,SNMPv2-MIB::sysORTable,,not-accessible,,current,,The (conceptual) table listing the capabilities of the local SNMP application acting as a command responder with respect to various MIB modules. SNMP entities having dynamically-configurable support of MIB modules will have a dynamically-varying number of conceptual rows.
.1.3.6.1.2.1.1.9.1,SNMPv2-MIB::sysOREntry,,not-accessible,sysORIndex,current,,An entry (conceptual row) in the sysORTable.
.1.3.6.1.2.1.1.9.1.1,SNMPv2-MIB::sysORIndex,INTEGER,not-accessible,,current,,The auxiliary variable used for identifying instances of the columnar objects in the sysORTable.
.1.3.6.1.2.1.1.9.1.2,SNMPv2-MIB::sysORID,OBJECT,read-only,,current,,An authoritative identification of a capabilities statement with respect to various MIB modules supported by the local SNMP application acting as a command responder.
.1.3.6.1.2.1.1.9.1.3,SNMPv2-MIB::sysORDescr,OCTET,read-only,,current,,A textual description of the capabilities identified by the corresponding instance of sysORID.
.1.3.6.1.2.1.1.9.1.4,SNMPv2-MIB::sysORUpTime,TimeTicks,read-only,,current,,The value of sysUpTime at the time this conceptual row was last instantiated.
.1.3.6.1.2.1.2,RFC1213-MIB::interfaces,,,,,,
.1.3.6.1.2.1.2.1,RFC1213-MIB::ifNumber,INTEGER,read-only,,mandatory,,The number of network interfaces (regardless of their current state) present on this system.
.1.3.6.1.2.1.2.2,RFC1213-MIB::ifTable,,not-accessible,,mandatory,,A list of interface entries. The number of entries is given by the value of ifNumber.
.1.3.6.1.2.1.2.2.1,RFC1213-MIB::ifEntry,,not-accessible,ifIndex,mandatory,,An interface entry containing objects at the subnetwork layer and below for a particular interface.
.1.3.6.1.2.1.2.2.1.1,RFC1213-MIB::ifIndex,INTEGER,read-only,,mandatory,,A unique value for each interface. Its value ranges between 1 and the value of ifNumber. The value for each interface must remain constant at least from one re-initialization of the entity's network management system to the next re- initialization.
.1.3.6.1.2.1.2.2.1.2,RFC1213-MIB::ifDescr,OCTET,read-only,,mandatory,,A textual string containing information about the interface. This string should include the name of the manufacturer, the product name and the version of the hardware interface.
.1.3.6.1.2.1.2.2.1.3,RFC1213-MIB::ifType,INTEGER,read-only,,mandatory,other(1):regular1822(2):hdh1822(3):ddnX25(4):rfc877x25(5):ethernetCsmacd(6):iso88023Csmacd(7):iso88024TokenBus(8):iso88025TokenRing(9):iso88026Man(10):starLan(11):proteon10Mbit(12):proteon80Mbit(13):hyperchannel(14):fddi(15):lapb(16):sdlc(17):ds1(18):e1(19):basicISDN(20):primaryISDN(21):propPointToPointSerial(22):ppp(23):softwareLoopback(24):eon(25):ethernet3Mbit(26):nsip(27):slip(28):ultra(29):ds3(30):sip(31):frameRelay(32):rs232(33):para(34):arcnet(35):arcnetPlus(36):atm(37):miox25(38):sonet(39):x25ple(40):iso88022llc(41):localTalk(42):smdsDxi(43):frameRelayService(44):v35(45):hssi(46):hippi(47):modem(48):aal5(49):sonetPath(50):sonetVT(51):smdsIcip(52):propVirtual(53):propMultiplexor(54):ieee80212(55):fibreChannel(56):hippiInterface(57):frameRelayInterconnect(58):aflane8023(59):aflane8025(60):cctEmul(61):fastEther(62):isdn(63):v11(64):v36(65):g703at64k(66):g703at2mb(67):qllc(68):fastEtherFX(69):channel(70):ieee80211(71):ibm370parChan(72):escon(73):dlsw(74):isdns(75):isdnu(76):lapd(77):ipSwitch(78):rsrb(79):atmLogical(80):ds0(81):ds0Bundle(82):bsc(83):async(84):cnr(85):iso88025Dtr(86):eplrs(87):arap(88):propCnls(89):hostPad(90):termPad(91):frameRelayMPI(92):x213(93):adsl(94):radsl(95):sdsl(96):vdsl(97):iso88025CRFPInt(98):myrinet(99):voiceEM(100):voiceFXO(101):voiceFXS(102):voiceEncap(103):voiceOverIp(104):atmDxi(105):atmFuni(106):atmIma(107):pppMultilinkBundle(108):ipOverCdlc(109):ipOverClaw(110):stackToStack(111):virtualIpAddress(112):mpc(113):ipOverAtm(114):iso88025Fiber(115):tdlc(116):gigabitEthernet(117):hdlc(118):lapf(119):v37(120):x25mlp(121):x25huntGroup(122):transpHdlc(123):interleave(124):fast(125):ip(126):docsCableMaclayer(127):docsCableDownstream(128):docsCableUpstream(129):a12MppSwitch(130):tunnel(131):coffee(132):ces(133):atmSubInterface(134):l2vlan(135):l3ipvlan(136):l3ipxvlan(137):digitalPowerline(138):mediaMailOverIp(139):dtm(140):dcn(141):ipForward(142):msdsl(143):ieee1394(144):if-gsn(145):dvbRccMacLayer(146):dvbRccDownstream(147):dvbRccUpstream(148):atmVirtual(149):mplsTunnel(150):srp(151):voiceOverAtm(152):voiceOverFrameRelay(153):idsl(154):compositeLink(155):ss7SigLink(156):propWirelessP2P(157):frForward(158):rfc1483(159):usb(160):ieee8023adLag(161):bgppolicyaccounting(162):frf16MfrBundle(163):h323Gatekeeper(164):h323Proxy(165):mpls(166):mfSigLink(167):hdsl2(168):shdsl(169):ds1FDL(170):pos(171):dvbAsiIn(172):dvbAsiOut(173):plc(174):nfas(175):tr008(176):gr303RDT(177):gr303IDT(178):isup(179):propDocsWirelessMaclayer(180):propDocsWirelessDownstream(181):propDocsWirelessUpstream(182):hiperlan2(183):propBWAp2Mp(184):sonetOverheadChannel(185):digitalWrapperOverheadChannel(186):aal2(187):radioMAC(188):atmRadio(189):imt(190):mvl(191):reachDSL(192):frDlciEndPt(193):atmVciEndPt(194):opticalChannel(195):opticalTransport(196):propAtm(197):voiceOverCable(198):infiniband(199):teLink(200):q2931(201):virtualTg(202):sipTg(203):sipSig(204):docsCableUpstreamChannel(205):econet(206):pon155(207):pon622(208):bridge(209):linegroup(210):voiceEMFGD(211):voiceFGDEANA(212):voiceDID(213):mpegTransport(214):sixToFour(215):gtp(216):pdnEtherLoop1(217):pdnEtherLoop2(218):opticalChannelGroup(219):homepna(220):gfp(221):ciscoISLvlan(222):actelisMetaLOOP(223):fcipLink(224):rpr(225):qam(226):lmp(227):cblVectaStar(228):docsCableMCmtsDownstream(229):adsl2(230):macSecControlledIF(231):macSecUncontrolledIF(232):aviciOpticalEther(233):atmbond(234):voiceFGDOS(235):mocaVersion1(236):ieee80216WMAN(237):adsl2plus(238):dvbRcsMacLayer(239):dvbTdm(240):dvbRcsTdma(241):x86Laps(242):wwanPP(243):wwanPP2(244):voiceEBS(245):ifPwType(246):ilan(247):pip(248):aluELP(249):gpon(250):vdsl2(251):capwapDot11Profile(252):capwapDot11Bss(253):capwapWtpVirtualRadio(254):bits(255):docsCableUpstreamRfPort(256):cableDownstreamRfPort(257):vmwareVirtualNic(258):ieee802154(259):otnOdu(260):otnOtu(261):ifVfiType(262):g9981(263):g9982(264):g9983(265):aluEpon(266):aluEponOnu(267):aluEponPhysicalUni(268):aluEponLogicalLink(269):aluGponOnu(270):aluGponPhysicalUni(271):vmwareNicTeam(272):docsOfdmDownstream(277):docsOfdmaUpstream(278):gfast(279):sdci(280):xboxWireless(281):fastdsl(282):docsCableScte55d1FwdOob(283):docsCableScte55d1RetOob(284):docsCableScte55d2DsOob(285):docsCableScte55d2UsOob(286):docsCableNdf(287):docsCableNdr(288):ptm(289):ghn(290):otnOtsi(291):otnOtuc(292):otnOduc(293):otnOtsig(294):microwaveCarrierTermination(295):microwaveRadioLinkTerminal(296),The type of interface, distinguished according to the physical/link protocol(s) immediately `below' the network layer in the protocol stack.
.1.3.6.1.2.1.2.2.1.4,RFC1213-MIB::ifMtu,INTEGER,read-only,,mandatory,,The size of the largest datagram which can be sent/received on the interface, specified in octets. For interfaces that are used for transmitting network datagrams, this is the size of the largest network datagram that can be sent on the interface.
.1.3.6.1.2.1.2.2.1.5,RFC1213-MIB::ifSpeed,Gauge32,read-only,,mandatory,,An estimate of the interface's current bandwidth in bits per second. For interfaces which do not vary in bandwidth or for those where no accurate estimation can be made, this object should contain the nominal bandwidth.
.1.3.6.1.2.1.2.2.1.6,RFC1213-MIB::ifPhysAddress,OCTET,read-only,,mandatory,,The interface's address at the protocol layer immediately `below' the network layer in the protocol stack. For interfaces which do not have such an address (e.g., a serial line), this object should contain an octet string of zero length.
.1.3.6.1.2.1.2.2.1.7,RFC1213-MIB::ifAdminStatus,INTEGER,read-write,,mandatory,up(1):down(2):testing(3),The desired state of the interface. The testing(3) state indicates that no operational packets can be passed.
.1.3.6.1.2.1.2.2.1.8,RFC1213-MIB::ifOperStatus,INTEGER,read-only,,mandatory,up(1):down(2):testing(3),The current operational state of the interface. The testing(3) state indicates that no operational packets can be passed.
.1.3.6.1.2.1.2.2.1.9,RFC1213-MIB::ifLastChange,TimeTicks,read-only,,mandatory,,The value of sysUpTime at the time the interface entered its current operational state. If the current state was entered prior to the last re- initialization of the local network management subsystem, then this object contains a zero value.
.1.3.6.1.2.1.2.2.1.10,RFC1213-MIB::ifInOctets,Counter32,read-only,,mandatory,,The total number of octets received on the interface, including framing characters.
.1.3.6.1.2.1.2.2.1.11,RFC1213-MIB::ifInUcastPkts,Counter32,read-only,,mandatory,,The number of subnetwork-unicast packets delivered to a higher-layer protocol.
.1.3.6.1.2.1.2.2.1.12,RFC1213-MIB::ifInNUcastPkts,Counter32,read-only,,mandatory,,The number of non-unicast (i.e., subnetwork- broadcast or subnetwork-multicast) packets delivered to a higher-layer protocol.
.1.3.6.1.2.1.2.2.1.13,RFC1213-MIB::ifInDiscards,Counter32,read-only,,mandatory,,The number of inbound packets which were chosen to be discarded even though no errors had been detected to prevent their being deliverable to a higher-layer protocol. One possible reason for discarding such a packet could be to free up buffer space.
.1.3.6.1.2.1.2.2.1.14,RFC1213-MIB::ifInErrors,Counter32,read-only,,mandatory,,The number of inbound packets that contained errors preventing them from being deliverable to a higher-layer protocol.
.1.3.6.1.2.1.2.2.1.15,RFC1213-MIB::ifInUnknownProtos,Counter32,read-only,,mandatory,,The number of packets received via the interface which were discarded because of an unknown or unsupported protocol.
.1.3.6.1.2.1.2.2.1.16,RFC1213-MIB::ifOutOctets,Counter32,read-only,,mandatory,,The total number of octets transmitted out of the interface, including framing characters.
.1.3.6.1.2.1.2.2.1.17,RFC1213-MIB::ifOutUcastPkts,Counter32,read-only,,mandatory,,The total number of packets that higher-level protocols requested be transmitted to a subnetwork-unicast address, including those that were discarded or not sent.
.1.3.6.1.2.1.2.2.1.18,RFC1213-MIB::ifOutNUcastPkts,Counter32,read-only,,mandatory,,The total number of packets that higher-level protocols requested be transmitted to a non- unicast (i.e., a subnetwork-broadcast or subnetwork-multicast) address, including those that were discarded or not sent.
.1.3.6.1.2.1.2.2.1.19,RFC1213-MIB::ifOutDiscards,Counter32,read-only,,mandatory,,The number of outbound packets which were chosen to be discarded even though no errors had been detected to prevent their being transmitted. One possible reason for discarding such a packet could be to free up buffer space.
.1.3.6.1.2.1.2.2.1.20,RFC1213-MIB::ifOutErrors,Counter32,read-only,,mandatory,,The number of outbound packets that could not be transmitted because of errors.
.1.3.6.1.2.1.2.2.1.21,RFC1213-MIB::ifOutQLen,Gauge32,read-only,,mandatory,,The length of the output packet queue (in packets).
.1.3.6.1.2.1.2.2.1.22,RFC1213-MIB::ifSpecific,OBJECT,read-only,,mandatory,,A reference to MIB definitions specific to the particular media being used to realize the interface. For example, if the interface is realized by an ethernet, then the value of this object refers to a document defining objects specific to ethernet. If this information is not present, its value should be set to the OBJECT IDENTIFIER { 0 0 }, which is a syntatically valid object identifier, and any conformant implementation of ASN.1 and BER must be able to generate and recognize this value.
.1.3.6.1.2.1.3,RFC1213-MIB::at,,,,,,
.1.3.6.1.2.1.3.1,RFC1213-MIB::atTable,,not-accessible,,deprecated,,The Address Translation tables contain the NetworkAddress to `physical' address equivalences. Some interfaces do not use translation tables for determining address equivalences (e.g., DDN-X.25 has an algorithmic method); if all interfaces are of this type, then the Address Translation table is empty, i.e., has zero entries.
.1.3.6.1.2.1.3.1.1,RFC1213-MIB::atEntry,,not-accessible,atIfIndex:atNetAddress,deprecated,,Each entry contains one NetworkAddress to `physical' address equivalence.
.1.3.6.1.2.1.3.1.1.1,RFC1213-MIB::atIfIndex,INTEGER,read-write,,deprecated,,The interface on which this entry's equivalence is effective. The interface identified by a particular value of this index is the same interface as identified by the same value of ifIndex.
.1.3.6.1.2.1.3.1.1.2,RFC1213-MIB::atPhysAddress,OCTET,read-write,,deprecated,,The media-dependent `physical' address. Setting this object to a null string (one of zero length) has the effect of invaliding the corresponding entry in the atTable object. That is, it effectively dissasociates the interface identified with said entry from the mapping identified with said entry. It is an implementation-specific matter as to whether the agent removes an invalidated entry from the table. Accordingly, management stations must be prepared to receive tabular information from agents that corresponds to entries not currently in use. Proper interpretation of such entries requires examination of the relevant atPhysAddress object.
.1.3.6.1.2.1.3.1.1.3,RFC1213-MIB::atNetAddress,NetworkAddress,read-write,,deprecated,,The NetworkAddress (e.g., the IP address) corresponding to the media-dependent `physical' address.
.1.3.6.1.2.1.4,RFC1213-MIB::ip,,,,,,
.1.3.6.1.2.1.4.1,RFC1213-MIB::ipForwarding,INTEGER,read-write,,mandatory,forwarding(1):not-forwarding(2),The indication of whether this entity is acting as an IP gateway in respect to the forwarding of datagrams received by, but not addressed to, this entity. IP gateways forward datagrams. IP hosts do not (except those source-routed via the host). Note that for some managed nodes, this object may take on only a subset of the values possible. Accordingly, it is appropriate for an agent to return a `badValue' response if a management station attempts to change this object to an inappropriate value.
.1.3.6.1.2.1.4.2,RFC1213-MIB::ipDefaultTTL,INTEGER,read-write,,mandatory,,The default value inserted into the Time-To-Live field of the IP header of datagrams originated at this entity, whenever a TTL value is not supplied by the transport layer protocol.
.1.3.6.1.2.1.4.3,RFC1213-MIB::ipInReceives,Counter32,read-only,,mandatory,,The total number of input datagrams received from interfaces, including those received in error.
.1.3.6.1.2.1.4.4,RFC1213-MIB::ipInHdrErrors,Counter32,read-only,,mandatory,,The number of input datagrams discarded due to errors in their IP headers, including bad checksums, version number mismatch, other format errors, time-to-live exceeded, errors discovered in processing their IP options, etc.
.1.3.6.1.2.1.4.5,RFC1213-MIB::ipInAddrErrors,Counter32,read-only,,mandatory,,The number of input datagrams discarded because the IP address in their IP header's destination field was not a valid address to be received at this entity. This count includes invalid addresses (e.g., 0.0.0.0) and addresses of unsupported Classes (e.g., Class E). For entities which are not IP Gateways and therefore do not forward datagrams, this counter includes datagrams discarded because the destination address was not a local address.
.1.3.6.1.2.1.4.6,RFC1213-MIB::ipForwDatagrams,Counter32,read-only,,mandatory,,The number of input datagrams for which this entity was not their final IP destination, as a result of which an attempt was made to find a route to forward them to that final destination. In entities which do not act as IP Gateways, this counter will include only those packets which were Source-Routed via this entity, and the Source- Route option processing was successful.
.1.3.6.1.2.1.4.7,RFC1213-MIB::ipInUnknownProtos,Counter32,read-only,,mandatory,,The number of locally-addressed datagrams received successfully but discarded because of an unknown or unsupported protocol.
.1.3.6.1.2.1.4.8,RFC1213-MIB::ipInDiscards,Counter32,read-only,,mandatory,,The number of input IP datagrams for which no problems were encountered to prevent their continued processing, but which were discarded (e.g., for lack of buffer space). Note that this counter does not include any datagrams discarded while awaiting re-assembly.
.1.3.6.1.2.1.4.9,RFC1213-MIB::ipInDelivers,Counter32,read-only,,mandatory,,The total number of input datagrams successfully delivered to IP user-protocols (including ICMP).
.1.3.6.1.2.1.4.10,RFC1213-MIB::ipOutRequests,Counter32,read-only,,mandatory,,The total number of IP datagrams which local IP user-protocols (including ICMP) supplied to IP in requests for transmission. Note that this counter does not include any datagrams counted in ipForwDatagrams.
.1.3.6.1.2.1.4.11,RFC1213-MIB::ipOutDiscards,Counter32,read-only,,mandatory,,The number of output IP datagrams for which no problem was encountered to prevent their transmission to their destination, but which were discarded (e.g., for lack of buffer space). Note that this counter would include datagrams counted in ipForwDatagrams if any such packets met this (discretionary) discard criterion.
.1.3.6.1.2.1.4.12,RFC1213-MIB::ipOutNoRoutes,Counter32,read-only,,mandatory,,The number of IP datagrams discarded because no route could be found to transmit them to their destination. Note that this counter includes any packets counted in ipForwDatagrams which meet this `no-route' criterion. Note that this includes any datagarms which a host cannot route because all of its default gateways are down.
.1.3.6.1.2.1.4.13,RFC1213-MIB::ipReasmTimeout,INTEGER,read-only,,mandatory,,The maximum number of seconds which received fragments are held while they are awaiting reassembly at this entity.
.1.3.6.1.2.1.4.14,RFC1213-MIB::ipReasmReqds,Counter32,read-only,,mandatory,,The number of IP fragments received which needed to be reassembled at this entity.
.1.3.6.1.2.1.4.15,RFC1213-MIB::ipReasmOKs,Counter32,read-only,,mandatory,,The number of IP datagrams successfully re- assembled.
.1.3.6.1.2.1.4.16,RFC1213-MIB::ipReasmFails,Counter32,read-only,,mandatory,,The number of failures detected by the IP re- assembly algorithm (for whatever reason: timed out, errors, etc). Note that this is not necessarily a count of discarded IP fragments since some algorithms (notably the algorithm in RFC 815) can lose track of the number of fragments by combining them as they are received.
.1.3.6.1.2.1.4.17,RFC1213-MIB::ipFragOKs,Counter32,read-only,,mandatory,,The number of IP datagrams that have been successfully fragmented at this entity.
.1.3.6.1.2.1.4.18,RFC1213-MIB::ipFragFails,Counter32,read-only,,mandatory,,The number of IP datagrams that have been discarded because they needed to be fragmented at this entity but could not be, e.g., because their Don't Fragment flag was set.
.1.3.6.1.2.1.4.19,RFC1213-MIB::ipFragCreates,Counter32,read-only,,mandatory,,The number of IP datagram fragments that have been generated as a result of fragmentation at this entity.
.1.3.6.1.2.1.4.20,RFC1213-MIB::ipAddrTable,,not-accessible,,mandatory,,The table of addressing information relevant to this entity's IP addresses.
.1.3.6.1.2.1.4.20.1,RFC1213-MIB::ipAddrEntry,,not-accessible,ipAdEntAddr,mandatory,,The addressing information for one of this entity's IP addresses.
.1.3.6.1.2.1.4.20.1.1,RFC1213-MIB::ipAdEntAddr,IpAddress,read-only,,mandatory,,The IP address to which this entry's addressing information pertains.
.1.3.6.1.2.1.4.20.1.2,RFC1213-MIB::ipAdEntIfIndex,INTEGER,read-only,,mandatory,,The index value which uniquely identifies the interface to which this entry is applicable. The interface identified by a particular value of this index is the same interface as identified by the same value of ifIndex.
.1.3.6.1.2.1.4.20.1.3,RFC1213-MIB::ipAdEntNetMask,IpAddress,read-only,,mandatory,,The subnet mask associated with the IP address of this entry. The value of the mask is an IP address with all the network bits set to 1 and all the hosts bits set to 0.
.1.3.6.1.2.1.4.20.1.4,RFC1213-MIB::ipAdEntBcastAddr,INTEGER,read-only,,mandatory,,The value of the least-significant bit in the IP broadcast address used for sending datagrams on the (logical) interface associated with the IP address of this entry. For example, when the Internet standard all-ones broadcast address is used, the value will be 1. This value applies to both the subnet and network broadcasts addresses used by the entity on this (logical) interface.
.1.3.6.1.2.1.4.20.1.5,RFC1213-MIB::ipAdEntReasmMaxSize,INTEGER,read-only,,mandatory,,The size of the largest IP datagram which this entity can re-assemble from incoming IP fragmented datagrams received on this interface.
.1.3.6.1.2.1.4.21,RFC1213-MIB::ipRouteTable,,not-accessible,,mandatory,,This entity's IP Routing table.
.1.3.6.1.2.1.4.21.1,RFC1213-MIB::ipRouteEntry,,not-accessible,ipRouteDest,mandatory,,A route to a particular destination.
.1.3.6.1.2.1.4.21.1.1,RFC1213-MIB::ipRouteDest,IpAddress,read-write,,mandatory,,The destination IP address of this route. An entry with a value of 0.0.0.0 is considered a default route. Multiple routes to a single destination can appear in the table, but access to such multiple entries is dependent on the table- access mechanisms defined by the network management protocol in use.
.1.3.6.1.2.1.4.21.1.2,RFC1213-MIB::ipRouteIfIndex,INTEGER,read-write,,mandatory,,The index value which uniquely identifies the local interface through which the next hop of this route should be reached. The interface identified by a particular value of this index is the same interface as identified by the same value of ifIndex.
.1.3.6.1.2.1.4.21.1.3,RFC1213-MIB::ipRouteMetric1,INTEGER,read-write,,mandatory,,The primary routing metric for this route. The semantics of this metric are determined by the routing-protocol specified in the route's ipRouteProto value. If this metric is not used, its value should be set to -1.
.1.3.6.1.2.1.4.21.1.4,RFC1213-MIB::ipRouteMetric2,INTEGER,read-write,,mandatory,,An alternate routing metric for this route. The semantics of this metric are determined by the routing-protocol specified in the route's ipRouteProto value. If this metric is not used, its value should be set to -1.
.1.3.6.1.2.1.4.21.1.5,RFC1213-MIB::ipRouteMetric3,INTEGER,read-write,,mandatory,,An alternate routing metric for this route. The semantics of this metric are determined by the routing-protocol specified in the route's ipRouteProto value. If this metric is not used, its value should be set to -1.
.1.3.6.1.2.1.4.21.1.6,RFC1213-MIB::ipRouteMetric4,INTEGER,read-write,,mandatory,,An alternate routing metric for this route. The semantics of this metric are determined by the routing-protocol specified in the route's ipRouteProto value. If this metric is not used, its value should be set to -1.
.1.3.6.1.2.1.4.21.1.7,RFC1213-MIB::ipRouteNextHop,IpAddress,read-write,,mandatory,,The IP address of the next hop of this route. (In the case of a route bound to an interface which is realized via a broadcast media, the value of this field is the agent's IP address on that interface.)
.1.3.6.1.2.1.4.21.1.8,RFC1213-MIB::ipRouteType,INTEGER,read-write,,mandatory,other(1):invalid(2):direct(3):indirect(4),The type of route. Note that the values direct(3) and indirect(4) refer to the notion of direct and indirect routing in the IP architecture. Setting this object to the value invalid(2) has the effect of invalidating the corresponding entry in the ipRouteTable object. That is, it effectively dissasociates the destination identified with said entry from the route identified with said entry. It is an implementation-specific matter as to whether the agent removes an invalidated entry from the table. Accordingly, management stations must be prepared to receive tabular information from agents that corresponds to entries not currently in use. Proper interpretation of such entries requires examination of the relevant ipRouteType object.
.1.3.6.1.2.1.4.21.1.9,RFC1213-MIB::ipRouteProto,INTEGER,read-only,,mandatory,other(1):local(2):netmgmt(3):icmp(4):egp(5):ggp(6):hello(7):rip(8):is-is(9):es-is(10):ciscoIgrp(11):bbnSpfIgp(12):ospf(13):bgp(14),The routing mechanism via which this route was learned. Inclusion of values for gateway routing protocols is not intended to imply that hosts should support those protocols.
.1.3.6.1.2.1.4.21.1.10,RFC1213-MIB::ipRouteAge,INTEGER,read-write,,mandatory,,The number of seconds since this route was last updated or otherwise determined to be correct. Note that no semantics of `too old' can be implied except through knowledge of the routing protocol by which the route was learned.
.1.3.6.1.2.1.4.21.1.11,RFC1213-MIB::ipRouteMask,IpAddress,read-write,,mandatory,,Indicate the mask to be logical-ANDed with the destination address before being compared to the value in the ipRouteDest field. For those systems that do not support arbitrary subnet masks, an agent constructs the value of the ipRouteMask by determining whether the value of the correspondent ipRouteDest field belong to a class-A, B, or C network, and then using one of: mask network 255.0.0.0 class-A 255.255.0.0 class-B 255.255.255.0 class-C If the value of the ipRouteDest is 0.0.0.0 (a default route), then the mask value is also 0.0.0.0. It should be noted that all IP routing subsystems implicitly use this mechanism.
.1.3.6.1.2.1.4.21.1.12,RFC1213-MIB::ipRouteMetric5,INTEGER,read-write,,mandatory,,An alternate routing metric for this route. The semantics of this metric are determined by the routing-protocol specified in the route's ipRouteProto value. If this metric is not used, its value should be set to -1.
.1.3.6.1.2.1.4.21.1.13,RFC1213-MIB::ipRouteInfo,OBJECT,read-only,,mandatory,,A reference to MIB definitions specific to the particular routing protocol which is responsible for this route, as determined by the value specified in the route's ipRouteProto value. If this information is not present, its value should be set to the OBJECT IDENTIFIER { 0 0 }, which is a syntatically valid object identifier, and any conformant implementation of ASN.1 and BER must be able to generate and recognize this value.
.1.3.6.1.2.1.4.22,RFC1213-MIB::ipNetToMediaTable,,not-accessible,,mandatory,,The IP Address Translation table used for mapping from IP addresses to physical addresses.
.1.3.6.1.2.1.4.22.1,RFC1213-MIB::ipNetToMediaEntry,,not-accessible,ipNetToMediaIfIndex:ipNetToMediaNetAddress,mandatory,,Each entry contains one IpAddress to `physical' address equivalence.
.1.3.6.1.2.1.4.22.1.1,RFC1213-MIB::ipNetToMediaIfIndex,INTEGER,read-write,,mandatory,,The interface on which this entry's equivalence is effective. The interface identified by a particular value of this index is the same interface as identified by the same value of ifIndex.
.1.3.6.1.2.1.4.22.1.2,RFC1213-MIB::ipNetToMediaPhysAddress,OCTET,read-write,,mandatory,,The media-dependent `physical' address.
.1.3.6.1.2.1.4.22.1.3,RFC1213-MIB::ipNetToMediaNetAddress,IpAddress,read-write,,mandatory,,The IpAddress corresponding to the media- dependent `physical' address.
.1.3.6.1.2.1.4.22.1.4,RFC1213-MIB::ipNetToMediaType,INTEGER,read-write,,mandatory,other(1):invalid(2):dynamic(3):static(4),The type of mapping. Setting this object to the value invalid(2) has the effect of invalidating the corresponding entry in the ipNetToMediaTable. That is, it effectively dissasociates the interface identified with said entry from the mapping identified with said entry. It is an implementation-specific matter as to whether the agent removes an invalidated entry from the table. Accordingly, management stations must be prepared to receive tabular information from agents that corresponds to entries not currently in use. Proper interpretation of such entries requires examination of the relevant ipNetToMediaType object.
.1.3.6.1.2.1.4.23,RFC1213-MIB::ipRoutingDiscards,Counter32,read-only,,mandatory,,The number of routing entries which were chosen to be discarded even though they are valid. One possible reason for discarding such an entry could be to free-up buffer space for other routing entries.
.1.3.6.1.2.1.5,RFC1213-MIB::icmp,,,,,,
.1.3.6.1.2.1.5.1,RFC1213-MIB::icmpInMsgs,Counter32,read-only,,mandatory,,The total number of ICMP messages which the entity received. Note that this counter includes all those counted by icmpInErrors.
.1.3.6.1.2.1.5.2,RFC1213-MIB::icmpInErrors,Counter32,read-only,,mandatory,,The number of ICMP messages which the entity received but determined as having ICMP-specific errors (bad ICMP checksums, bad length, etc.).
.1.3.6.1.2.1.5.3,RFC1213-MIB::icmpInDestUnreachs,Counter32,read-only,,mandatory,,The number of ICMP Destination Unreachable messages received.
.1.3.6.1.2.1.5.4,RFC1213-MIB::icmpInTimeExcds,Counter32,read-only,,mandatory,,The number of ICMP Time Exceeded messages received.
.1.3.6.1.2.1.5.5,RFC1213-MIB::icmpInParmProbs,Counter32,read-only,,mandatory,,The number of ICMP Parameter Problem messages received.
.1.3.6.1.2.1.5.6,RFC1213-MIB::icmpInSrcQuenchs,Counter32,read-only,,mandatory,,The number of ICMP Source Quench messages received.
.1.3.6.1.2.1.5.7,RFC1213-MIB::icmpInRedirects,Counter32,read-only,,mandatory,,The number of ICMP Redirect messages received.
.1.3.6.1.2.1.5.8,RFC1213-MIB::icmpInEchos,Counter32,read-only,,mandatory,,The number of ICMP Echo (request) messages received.
.1.3.6.1.2.1.5.9,RFC1213-MIB::icmpInEchoReps,Counter32,read-only,,mandatory,,The number of ICMP Echo Reply messages received.
.1.3.6.1.2.1.5.10,RFC1213-MIB::icmpInTimestamps,Counter32,read-only,,mandatory,,The number of ICMP Timestamp (request) messages received.
.1.3.6.1.2.1.5.11,RFC1213-MIB::icmpInTimestampReps,Counter32,read-only,,mandatory,,The number of ICMP Timestamp Reply messages received.
.1.3.6.1.2.1.5.12,RFC1213-MIB::icmpInAddrMasks,Counter32,read-only,,mandatory,,The number of ICMP Address Mask Request messages received.
.1.3.6.1.2.1.5.13,RFC1213-MIB::icmpInAddrMaskReps,Counter32,read-only,,mandatory,,The number of ICMP Address Mask Reply messages received.
.1.3.6.1.2.1.5.14,RFC1213-MIB::icmpOutMsgs,Counter32,read-only,,mandatory,,The total number of ICMP messages which this entity attempted to send. Note that this counter includes all those counted by icmpOutErrors.
.1.3.6.1.2.1.5.15,RFC1213-MIB::icmpOutErrors,Counter32,read-only,,mandatory,,The number of ICMP messages which this entity did not send due to problems discovered within ICMP such as a lack of buffers. This value should not include errors discovered outside the ICMP layer such as the inability of IP to route the resultant datagram. In some implementations there may be no types of error which contribute to this counter's value.
.1.3.6.1.2.1.5.16,RFC1213-MIB::icmpOutDestUnreachs,Counter32,read-only,,mandatory,,The number of ICMP Destination Unreachable messages sent.
.1.3.6.1.2.1.5.17,RFC1213-MIB::icmpOutTimeExcds,Counter32,read-only,,mandatory,,The number of ICMP Time Exceeded messages sent.
.1.3.6.1.2.1.5.18,RFC1213-MIB::icmpOutParmProbs,Counter32,read-only,,mandatory,,The number of ICMP Parameter Problem messages sent.
.1.3.6.1.2.1.5.19,RFC1213-MIB::icmpOutSrcQuenchs,Counter32,read-only,,mandatory,,The number of ICMP Source Quench messages sent.
.1.3.6.1.2.1.5.20,RFC1213-MIB::icmpOutRedirects,Counter32,read-only,,mandatory,,The number of ICMP Redirect messages sent. For a host, this object will always be zero, since hosts do not send redirects.
.1.3.6.1.2.1.5.21,RFC1213-MIB::icmpOutEchos,Counter32,read-only,,mandatory,,The number of ICMP Echo (request) messages sent.
.1.3.6.1.2.1.5.22,RFC1213-MIB::icmpOutEchoReps,Counter32,read-only,,mandatory,,The number of ICMP Echo Reply messages sent.
.1.3.6.1.2.1.5.23,RFC1213-MIB::icmpOutTimestamps,Counter32,read-only,,mandatory,,The number of ICMP Timestamp (request) messages sent.
.1.3.6.1.2.1.5.24,RFC1213-MIB::icmpOutTimestampReps,Counter32,read-only,,mandatory,,The number of ICMP Timestamp Reply messages sent.
.1.3.6.1.2.1.5.25,RFC1213-MIB::icmpOutAddrMasks,Counter32,read-only,,mandatory,,The number of ICMP Address Mask Request messages sent.
.1.3.6.1.2.1.5.26,RFC1213-MIB::icmpOutAddrMaskReps,Counter32,read-only,,mandatory,,The number of ICMP Address Mask Reply messages sent.
.1.3.6.1.2.1.6,RFC1213-MIB::tcp,,,,,,
.1.3.6.1.2.1.6.1,RFC1213-MIB::tcpRtoAlgorithm,INTEGER,read-only,,mandatory,other(1):constant(2):rsre(3):vanj(4),The algorithm used to determine the timeout value used for retransmitting unacknowledged octets.
.1.3.6.1.2.1.6.2,RFC1213-MIB::tcpRtoMin,INTEGER,read-only,,mandatory,,The minimum value permitted by a TCP implementation for the retransmission timeout, measured in milliseconds. More refined semantics for objects of this type depend upon the algorithm used to determine the retransmission timeout. In particular, when the timeout algorithm is rsre(3), an object of this type has the semantics of the LBOUND quantity described in RFC 793.
.1.3.6.1.2.1.6.3,RFC1213-MIB::tcpRtoMax,INTEGER,read-only,,mandatory,,The maximum value permitted by a TCP implementation for the retransmission timeout, measured in milliseconds. More refined semantics for objects of this type depend upon the algorithm used to determine the retransmission timeout. In particular, when the timeout algorithm is rsre(3), an object of this type has the semantics of the UBOUND quantity described in RFC 793.
.1.3.6.1.2.1.6.4,RFC1213-MIB::tcpMaxConn,INTEGER,read-only,,mandatory,,The limit on the total number of TCP connections the entity can support. In entities where the maximum number of connections is dynamic, this object should contain the value -1.
.1.3.6.1.2.1.6.5,RFC1213-MIB::tcpActiveOpens,Counter32,read-only,,mandatory,,The number of times TCP connections have made a direct transition to the SYN-SENT state from the CLOSED state.
.1.3.6.1.2.1.6.6,RFC1213-MIB::tcpPassiveOpens,Counter32,read-only,,mandatory,,The number of times TCP connections have made a direct transition to the SYN-RCVD state from the LISTEN state.
.1.3.6.1.2.1.6.7,RFC1213-MIB::tcpAttemptFails,Counter32,read-only,,mandatory,,The number of times TCP connections have made a direct transition to the CLOSED state from either the SYN-SENT state or the SYN-RCVD state, plus the number of times TCP connections have made a direct transition to the LISTEN state from the SYN-RCVD state.
.1.3.6.1.2.1.6.8,RFC1213-MIB::tcpEstabResets,Counter32,read-only,,mandatory,,The number of times TCP connections have made a direct transition to the CLOSED state from either the ESTABLISHED state or the CLOSE-WAIT state.
.1.3.6.1.2.1.6.9,RFC1213-MIB::tcpCurrEstab,Gauge32,read-only,,mandatory,,The number of TCP connections for which the current state is either ESTABLISHED or CLOSE- WAIT.
.1.3.6.1.2.1.6.10,RFC1213-MIB::tcpInSegs,Counter32,read-only,,mandatory,,The total number of segments received, including those received in error. This count includes segments received on currently established connections.
.1.3.6.1.2.1.6.11,RFC1213-MIB::tcpOutSegs,Counter32,read-only,,mandatory,,The total number of segments sent, including those on current connections but excluding those containing only retransmitted octets.
.1.3.6.1.2.1.6.12,RFC1213-MIB::tcpRetransSegs,Counter32,read-only,,mandatory,,The total number of segments retransmitted - that is, the number of TCP segments transmitted containing one or more previously transmitted octets.
.1.3.6.1.2.1.6.13,RFC1213-MIB::tcpConnTable,,not-accessible,,mandatory,,A table containing TCP connection-specific information.
.1.3.6.1.2.1.6.13.1,RFC1213-MIB::tcpConnEntry,,not-accessible,tcpConnLocalAddress:tcpConnLocalPort:tcpConnRemAddress:tcpConnRemPort,mandatory,,Information about a particular current TCP connection. An object of this type is transient, in that it ceases to exist when (or soon after) the connection makes the transition to the CLOSED state.
.1.3.6.1.2.1.6.13.1.1,RFC1213-MIB::tcpConnState,INTEGER,read-write,,mandatory,closed(1):listen(2):synSent(3):synReceived(4):established(5):finWait1(6):finWait2(7):closeWait(8):lastAck(9):closing(10):timeWait(11):deleteTCB(12),The state of this TCP connection. The only value which may be set by a management station is deleteTCB(12). Accordingly, it is appropriate for an agent to return a `badValue' response if a management station attempts to set this object to any other value. If a management station sets this object to the value deleteTCB(12), then this has the effect of deleting the TCB (as defined in RFC 793) of the corresponding connection on the managed node, resulting in immediate termination of the connection. As an implementation-specific option, a RST segment may be sent from the managed node to the other TCP endpoint (note however that RST segments are not sent reliably).
.1.3.6.1.2.1.6.13.1.2,RFC1213-MIB::tcpConnLocalAddress,IpAddress,read-only,,mandatory,,The local IP address for this TCP connection. In the case of a connection in the listen state which is willing to accept connections for any IP interface associated with the node, the value 0.0.0.0 is used.
.1.3.6.1.2.1.6.13.1.3,RFC1213-MIB::tcpConnLocalPort,INTEGER,read-only,,mandatory,,The local port number for this TCP connection.
.1.3.6.1.2.1.6.13.1.4,RFC1213-MIB::tcpConnRemAddress,IpAddress,read-only,,mandatory,,The remote IP address for this TCP connection.
.1.3.6.1.2.1.6.13.1.5,RFC1213-MIB::tcpConnRemPort,INTEGER,read-only,,mandatory,,The remote port number for this TCP connection.
.1.3.6.1.2.1.6.14,RFC1213-MIB::tcpInErrs,Counter32,read-only,,mandatory,,The total number of segments received in error (e.g., bad TCP checksums).
.1.3.6.1.2.1.6.15,RFC1213-MIB::tcpOutRsts,Counter32,read-only,,mandatory,,The number of TCP segments sent containing the RST flag.
.1.3.6.1.2.1.7,RFC1213-MIB::udp,,,,,,
.1.3.6.1.2.1.7.1,RFC1213-MIB::udpInDatagrams,Counter32,read-only,,mandatory,,The total number of UDP datagrams delivered to UDP users.
.1.3.6.1.2.1.7.2,RFC1213-MIB::udpNoPorts,Counter32,read-only,,mandatory,,The total number of received UDP datagrams for which there was no application at the destination port.
.1.3.6.1.2.1.7.3,RFC1213-MIB::udpInErrors,Counter32,read-only,,mandatory,,The number of received UDP datagrams that could not be delivered for reasons other than the lack of an application at the destination port.
.1.3.6.1.2.1.7.4,RFC1213-MIB::udpOutDatagrams,Counter32,read-only,,mandatory,,The total number of UDP datagrams sent from this entity.
.1.3.6.1.2.1.7.5,RFC1213-MIB::udpTable,,not-accessible,,mandatory,,A table containing UDP listener information.
.1.3.6.1.2.1.7.5.1,RFC1213-MIB::udpEntry,,not-accessible,udpLocalAddress:udpLocalPort,mandatory,,Information about a particular current UDP listener.
.1.3.6.1.2.1.7.5.1.1,RFC1213-MIB::udpLocalAddress,IpAddress,read-only,,mandatory,,The local IP address for this UDP listener. In the case of a UDP listener which is willing to accept datagrams for any IP interface associated with the node, the value 0.0.0.0 is used.
.1.3.6.1.2.1.7.5.1.2,RFC1213-MIB::udpLocalPort,INTEGER,read-only,,mandatory,,The local port number for this UDP listener.
.1.3.6.1.2.1.8,RFC1213-MIB::egp,,,,,,
.1.3.6.1.2.1.8.1,RFC1213-MIB::egpInMsgs,Counter32,read-only,,mandatory,,The number of EGP messages received without error.
.1.3.6.1.2.1.8.2,RFC1213-MIB::egpInErrors,Counter32,read-only,,mandatory,,The number of EGP messages received that proved to be in error.
.1.3.6.1.2.1.8.3,RFC1213-MIB::egpOutMsgs,Counter32,read-only,,mandatory,,The total number of locally generated EGP messages.
.1.3.6.1.2.1.8.4,RFC1213-MIB::egpOutErrors,Counter32,read-only,,mandatory,,The number of locally generated EGP messages not sent due to resource limitations within an EGP entity.
.1.3.6.1.2.1.8.5,RFC1213-MIB::egpNeighTable,,not-accessible,,mandatory,,The EGP neighbor table.
.1.3.6.1.2.1.8.5.1,RFC1213-MIB::egpNeighEntry,,not-accessible,egpNeighAddr,mandatory,,Information about this entity's relationship with a particular EGP neighbor.
.1.3.6.1.2.1.8.5.1.1,RFC1213-MIB::egpNeighState,INTEGER,read-only,,mandatory,idle(1):acquisition(2):down(3):up(4):cease(5),The EGP state of the local system with respect to this entry's EGP neighbor. Each EGP state is represented by a value that is one greater than the numerical value associated with said state in RFC 904.
.1.3.6.1.2.1.8.5.1.2,RFC1213-MIB::egpNeighAddr,IpAddress,read-only,,mandatory,,The IP address of this entry's EGP neighbor.
.1.3.6.1.2.1.8.5.1.3,RFC1213-MIB::egpNeighAs,INTEGER,read-only,,mandatory,,The autonomous system of this EGP peer. Zero should be specified if the autonomous system number of the neighbor is not yet known.
.1.3.6.1.2.1.8.5.1.4,RFC1213-MIB::egpNeighInMsgs,Counter32,read-only,,mandatory,,The number of EGP messages received without error from this EGP peer.
.1.3.6.1.2.1.8.5.1.5,RFC1213-MIB::egpNeighInErrs,Counter32,read-only,,mandatory,,The number of EGP messages received from this EGP peer that proved to be in error (e.g., bad EGP checksum).
.1.3.6.1.2.1.8.5.1.6,RFC1213-MIB::egpNeighOutMsgs,Counter32,read-only,,mandatory,,The number of locally generated EGP messages to this EGP peer.
.1.3.6.1.2.1.8.5.1.7,RFC1213-MIB::egpNeighOutErrs,Counter32,read-only,,mandatory,,The number of locally generated EGP messages not sent to this EGP peer due to resource limitations within an EGP entity.
.1.3.6.1.2.1.8.5.1.8,RFC1213-MIB::egpNeighInErrMsgs,Counter32,read-only,,mandatory,,The number of EGP-defined error messages received from this EGP peer.
.1.3.6.1.2.1.8.5.1.9,RFC1213-MIB::egpNeighOutErrMsgs,Counter32,read-only,,mandatory,,The number of EGP-defined error messages sent to this EGP peer.
.1.3.6.1.2.1.8.5.1.10,RFC1213-MIB::egpNeighStateUps,Counter32,read-only,,mandatory,,The number of EGP state transitions to the UP state with this EGP peer.
.1.3.6.1.2.1.8.5.1.11,RFC1213-MIB::egpNeighStateDowns,Counter32,read-only,,mandatory,,The number of EGP state transitions from the UP state to any other state with this EGP peer.
.1.3.6.1.2.1.8.5.1.12,RFC1213-MIB::egpNeighIntervalHello,INTEGER,read-only,,mandatory,,The interval between EGP Hello command retransmissions (in hundredths of a second). This represents the t1 timer as defined in RFC 904.
.1.3.6.1.2.1.8.5.1.13,RFC1213-MIB::egpNeighIntervalPoll,INTEGER,read-only,,mandatory,,The interval between EGP poll command retransmissions (in hundredths of a second). This represents the t3 timer as defined in RFC 904.
.1.3.6.1.2.1.8.5.1.14,RFC1213-MIB::egpNeighMode,INTEGER,read-only,,mandatory,active(1):passive(2),The polling mode of this EGP entity, either passive or active.
.1.3.6.1.2.1.8.5.1.15,RFC1213-MIB::egpNeighEventTrigger,INTEGER,read-write,,mandatory,start(1):stop(2),A control variable used to trigger operator- initiated Start and Stop events. When read, this variable always returns the most recent value that egpNeighEventTrigger was set to. If it has not been set since the last initialization of the network management subsystem on the node, it returns a value of `stop'. When set, this variable causes a Start or Stop event on the specified neighbor, as specified on pages 8-10 of RFC 904. Briefly, a Start event causes an Idle peer to begin neighbor acquisition and a non-Idle peer to reinitiate neighbor acquisition. A stop event causes a non-Idle peer to return to the Idle state until a Start event occurs, either via egpNeighEventTrigger or otherwise.
.1.3.6.1.2.1.8.6,RFC1213-MIB::egpAs,INTEGER,read-only,,mandatory,,The autonomous system number of this EGP entity.
.1.3.6.1.2.1.10,SNMPv2-SMI::transmission,,,,,,
.1.3.6.1.2.1.11,RFC1213-MIB::snmp,,,,,,
.1.3.6.1.2.1.11.1,RFC1213-MIB::snmpInPkts,Counter32,read-only,,mandatory,,The total number of Messages delivered to the SNMP entity from the transport service.
.1.3.6.1.2.1.11.2,RFC1213-MIB::snmpOutPkts,Counter32,read-only,,mandatory,,The total number of SNMP Messages which were passed from the SNMP protocol entity to the transport service.
.1.3.6.1.2.1.11.3,RFC1213-MIB::snmpInBadVersions,Counter32,read-only,,mandatory,,The total number of SNMP Messages which were delivered to the SNMP protocol entity and were for an unsupported SNMP version.
.1.3.6.1.2.1.11.4,RFC1213-MIB::snmpInBadCommunityNames,Counter32,read-only,,mandatory,,The total number of SNMP Messages delivered to the SNMP protocol entity which used a SNMP community name not known to said entity.
.1.3.6.1.2.1.11.5,RFC1213-MIB::snmpInBadCommunityUses,Counter32,read-only,,mandatory,,The total number of SNMP Messages delivered to the SNMP protocol entity which represented an SNMP operation which was not allowed by the SNMP community named in the Message.
.1.3.6.1.2.1.11.6,RFC1213-MIB::snmpInASNParseErrs,Counter32,read-only,,mandatory,,The total number of ASN.1 or BER errors encountered by the SNMP protocol entity when decoding received SNMP Messages.
.1.3.6.1.2.1.11.8,RFC1213-MIB::snmpInTooBigs,Counter32,read-only,,mandatory,,The total number of SNMP PDUs which were delivered to the SNMP protocol entity and for which the value of the error-status field is `tooBig'.
.1.3.6.1.2.1.11.9,RFC1213-MIB::snmpInNoSuchNames,Counter32,read-only,,mandatory,,The total number of SNMP PDUs which were delivered to the SNMP protocol entity and for which the value of the error-status field is `noSuchName'.
.1.3.6.1.2.1.11.10,RFC1213-MIB::snmpInBadValues,Counter32,read-only,,mandatory,,The total number of SNMP PDUs which were delivered to the SNMP protocol entity and for which the value of the error-status field is `badValue'.
.1.3.6.1.2.1.11.11,RFC1213-MIB::snmpInReadOnlys,Counter32,read-only,,mandatory,,The total number valid SNMP PDUs which were delivered to the SNMP protocol entity and for which the value of the error-status field is `readOnly'. It should be noted that it is a protocol error to generate an SNMP PDU which contains the value `readOnly' in the error-status field, as such this object is provided as a means of detecting incorrect implementations of the SNMP.
.1.3.6.1.2.1.11.12,RFC1213-MIB::snmpInGenErrs,Counter32,read-only,,mandatory,,The total number of SNMP PDUs which were delivered to the SNMP protocol entity and for which the value of the error-status field is `genErr'.
.1.3.6.1.2.1.11.13,RFC1213-MIB::snmpInTotalReqVars,Counter32,read-only,,mandatory,,The total number of MIB objects which have been retrieved successfully by the SNMP protocol entity as the result of receiving valid SNMP Get-Request and Get-Next PDUs.
.1.3.6.1.2.1.11.14,RFC1213-MIB::snmpInTotalSetVars,Counter32,read-only,,mandatory,,The total number of MIB objects which have been altered successfully by the SNMP protocol entity as the result of receiving valid SNMP Set-Request PDUs.
.1.3.6.1.2.1.11.15,RFC1213-MIB::snmpInGetRequests,Counter32,read-only,,mandatory,,The total number of SNMP Get-Request PDUs which have been accepted and processed by the SNMP protocol entity.
.1.3.6.1.2.1.11.16,RFC1213-MIB::snmpInGetNexts,Counter32,read-only,,mandatory,,The total number of SNMP Get-Next PDUs which have been accepted and processed by the SNMP protocol entity.
.1.3.6.1.2.1.11.17,RFC1213-MIB::snmpInSetRequests,Counter32,read-only,,mandatory,,The total number of SNMP Set-Request PDUs which have been accepted and processed by the SNMP protocol entity.
.1.3.6.1.2.1.11.18,RFC1213-MIB::snmpInGetResponses,Counter32,read-only,,mandatory,,The total number of SNMP Get-Response PDUs which have been accepted and processed by the SNMP protocol entity.
.1.3.6.1.2.1.11.19,RFC1213-MIB::snmpInTraps,Counter32,read-only,,mandatory,,The total number of SNMP Trap PDUs which have been accepted and processed by the SNMP protocol entity.
.1.3.6.1.2.1.11.20,RFC1213-MIB::snmpOutTooBigs,Counter32,read-only,,mandatory,,The total number of SNMP PDUs which were generated by the SNMP protocol entity and for which the value of the error-status field is `tooBig.'
.1.3.6.1.2.1.11.21,RFC1213-MIB::snmpOutNoSuchNames,Counter32,read-only,,mandatory,,The total number of SNMP PDUs which were generated by the SNMP protocol entity and for which the value of the error-status is `noSuchName'.
.1.3.6.1.2.1.11.22,RFC1213-MIB::snmpOutBadValues,Counter32,read-only,,mandatory,,The total number of SNMP PDUs which were generated by the SNMP protocol entity and for which the value of the error-status field is `badValue'.
.1.3.6.1.2.1.11.24,RFC1213-MIB::snmpOutGenErrs,Counter32,read-only,,mandatory,,The total number of SNMP PDUs which were generated by the SNMP protocol entity and for which the value of the error-status field is `genErr'.
.1.3.6.1.2.1.11.25,RFC1213-MIB::snmpOutGetRequests,Counter32,read-only,,mandatory,,The total number of SNMP Get-Request PDUs which have been generated by the SNMP protocol entity.
.1.3.6.1.2.1.11.26,RFC1213-MIB::snmpOutGetNexts,Counter32,read-only,,mandatory,,The total number of SNMP Get-Next PDUs which have been generated by the SNMP protocol entity.
.1.3.6.1.2.1.11.27,RFC1213-MIB::snmpOutSetRequests,Counter32,read-only,,mandatory,,The total number of SNMP Set-Request PDUs which have been generated by the SNMP protocol entity.
.1.3.6.1.2.1.11.28,RFC1213-MIB::snmpOutGetResponses,Counter32,read-only,,mandatory,,The total number of SNMP Get-Response PDUs which have been generated by the SNMP protocol entity.
.1.3.6.1.2.1.11.29,RFC1213-MIB::snmpOutTraps,Counter32,read-only,,mandatory,,The total number of SNMP Trap PDUs which have been generated by the SNMP protocol entity.
.1.3.6.1.2.1.11.30,RFC1213-MIB::snmpEnableAuthenTraps,INTEGER,read-write,,mandatory,enabled(1):disabled(2),Indicates whether the SNMP agent process is permitted to generate authentication-failure traps. The value of this object overrides any configuration information; as such, it provides a means whereby all authentication-failure traps may be disabled. Note that it is strongly recommended that this object be stored in non-volatile memory so that it remains constant between re-initializations of the network management system.
.1.3.6.1.2.1.11.31,SNMPv2-MIB::snmpSilentDrops,Counter32,read-only,,current,,The total number of Confirmed Class PDUs (such as GetRequest-PDUs, GetNextRequest-PDUs, GetBulkRequest-PDUs, SetRequest-PDUs, and InformRequest-PDUs) delivered to the SNMP entity which were silently dropped because the size of a reply containing an alternate Response Class PDU (such as a Response-PDU) with an empty variable-bindings field was greater than either a local constraint or the maximum message size associated with the originator of the request.
.1.3.6.1.2.1.11.32,SNMPv2-MIB::snmpProxyDrops,Counter32,read-only,,current,,The total number of Confirmed Class PDUs (such as GetRequest-PDUs, GetNextRequest-PDUs, GetBulkRequest-PDUs, SetRequest-PDUs, and InformRequest-PDUs) delivered to the SNMP entity which were silently dropped because the transmission of the (possibly translated) message to a proxy target failed in a manner (other than a time-out) such that no Response Class PDU (such as a Response-PDU) could be returned.
.1.3.6.1.2.1.14,OSPF-MIB::ospf,,,,,,The MIB module to describe the OSPF Version 2 Protocol. Note that some objects in this MIB module may pose a significant security risk. Refer to the Security Considerations section in RFC 4750 for more information. Copyright (C) The IETF Trust (2006). This version of this MIB module is part of RFC 4750; see the RFC itself for full legal notices.
.1.3.6.1.2.1.14.1,OSPF-MIB::ospfGeneralGroup,,,,,,
.1.3.6.1.2.1.14.1.1,OSPF-MIB::ospfRouterId,IpAddress,read-write,,current,,A 32-bit integer uniquely identifying the router in the Autonomous System. By convention, to ensure uniqueness, this should default to the value of one of the router's IP interface addresses. This object is persistent and when written the entity SHOULD save the change to non-volatile storage.
.1.3.6.1.2.1.14.1.2,OSPF-MIB::ospfAdminStat,INTEGER,read-write,,current,enabled(1):disabled(2),The administrative status of OSPF in the router. The value 'enabled' denotes that the OSPF Process is active on at least one interface; 'disabled' disables it on all interfaces. This object is persistent and when written the entity SHOULD save the change to non-volatile storage.
.1.3.6.1.2.1.14.1.3,OSPF-MIB::ospfVersionNumber,INTEGER,read-only,,current,version2(2),The current version number of the OSPF protocol is 2.
.1.3.6.1.2.1.14.1.4,OSPF-MIB::ospfAreaBdrRtrStatus,INTEGER,read-only,,current,true(1):false(2),A flag to note whether this router is an Area Border Router.
.1.3.6.1.2.1.14.1.5,OSPF-MIB::ospfASBdrRtrStatus,INTEGER,read-write,,current,true(1):false(2),A flag to note whether this router is configured as an Autonomous System Border Router. This object is persistent and when written the entity SHOULD save the change to non-volatile storage.
.1.3.6.1.2.1.14.1.6,OSPF-MIB::ospfExternLsaCount,Gauge32,read-only,,current,,The number of external (LS type-5) link state advertisements in the link state database.
.1.3.6.1.2.1.14.1.7,OSPF-MIB::ospfExternLsaCksumSum,Integer32,read-only,,current,,The 32-bit sum of the LS checksums of the external link state advertisements contained in the link state database. This sum can be used to determine if there has been a change in a router's link state database and to compare the link state database of two routers. The value should be treated as unsigned when comparing two sums of checksums.
.1.3.6.1.2.1.14.1.8,OSPF-MIB::ospfTOSSupport,INTEGER,read-write,,current,true(1):false(2),The router's support for type-of-service routing. This object is persistent and when written the entity SHOULD save the change to non-volatile storage.
.1.3.6.1.2.1.14.1.9,OSPF-MIB::ospfOriginateNewLsas,Counter32,read-only,,current,,The number of new link state advertisements that have been originated. This number is incremented each time the router originates a new LSA. Discontinuities in the value of this counter can occur at re-initialization of the management system, and at other times as indicated by the value of ospfDiscontinuityTime.
.1.3.6.1.2.1.14.1.10,OSPF-MIB::ospfRxNewLsas,Counter32,read-only,,current,,The number of link state advertisements received that are determined to be new instantiations. This number does not include newer instantiations of self-originated link state advertisements. Discontinuities in the value of this counter can occur at re-initialization of the management system, and at other times as indicated by the value of ospfDiscontinuityTime.
.1.3.6.1.2.1.14.1.11,OSPF-MIB::ospfExtLsdbLimit,Integer32,read-write,,current,,The maximum number of non-default AS-external LSAs entries that can be stored in the link state database. If the value is -1, then there is no limit. When the number of non-default AS-external LSAs in a router's link state database reaches ospfExtLsdbLimit, the router enters overflow state. The router never holds more than ospfExtLsdbLimit non-default AS-external LSAs in its database. OspfExtLsdbLimit MUST be set identically in all routers attached to the OSPF backbone and/or any regular OSPF area (i.e., OSPF stub areas and NSSAs are excluded). This object is persistent and when written the entity SHOULD save the change to non-volatile storage.
.1.3.6.1.2.1.14.1.12,OSPF-MIB::ospfMulticastExtensions,Integer32,read-write,,current,,A bit mask indicating whether the router is forwarding IP multicast (Class D) datagrams based on the algorithms defined in the multicast extensions to OSPF. Bit 0, if set, indicates that the router can forward IP multicast datagrams in the router's directly attached areas (called intra-area multicast routing). Bit 1, if set, indicates that the router can forward IP multicast datagrams between OSPF areas (called inter-area multicast routing). Bit 2, if set, indicates that the router can forward IP multicast datagrams between Autonomous Systems (called inter-AS multicast routing). Only certain combinations of bit settings are allowed, namely: 0 (no multicast forwarding is enabled), 1 (intra-area multicasting only), 3 (intra-area and inter-area multicasting), 5 (intra-area and inter-AS multicasting), and 7 (multicasting everywhere). By default, no multicast forwarding is enabled. This object is persistent and when written the entity SHOULD save the change to non-volatile storage.
.1.3.6.1.2.1.14.1.13,OSPF-MIB::ospfExitOverflowInterval,Integer32,read-write,,current,,The number of seconds that, after entering OverflowState, a router will attempt to leave OverflowState. This allows the router to again originate non-default AS-external LSAs. When set to 0, the router will not leave overflow state until restarted. This object is persistent and when written the entity SHOULD save the change to non-volatile storage.
.1.3.6.1.2.1.14.1.14,OSPF-MIB::ospfDemandExtensions,INTEGER,read-write,,current,true(1):false(2),The router's support for demand routing. This object is persistent and when written the entity SHOULD save the change to non-volatile storage.
.1.3.6.1.2.1.14.1.15,OSPF-MIB::ospfRFC1583Compatibility,INTEGER,read-write,,current,true(1):false(2),Indicates metrics used to choose among multiple AS-external LSAs. When RFC1583Compatibility is set to enabled, only cost will be used when choosing among multiple AS-external LSAs advertising the same destination. When RFC1583Compatibility is set to disabled, preference will be driven first by type of path using cost only to break ties. This object is persistent and when written the entity SHOULD save the change to non-volatile storage.
.1.3.6.1.2.1.14.1.16,OSPF-MIB::ospfOpaqueLsaSupport,INTEGER,read-only,,current,true(1):false(2),The router's support for Opaque LSA types.
.1.3.6.1.2.1.14.1.17,OSPF-MIB::ospfReferenceBandwidth,Unsigned32,read-write,,current,,Reference bandwidth in kilobits/second for calculating default interface metrics. The default value is 100,000 KBPS (100 MBPS). This object is persistent and when written the entity SHOULD save the change to non-volatile storage.
.1.3.6.1.2.1.14.1.18,OSPF-MIB::ospfRestartSupport,INTEGER,read-write,,current,none(1):plannedOnly(2):plannedAndUnplanned(3),The router's support for OSPF graceful restart. Options include: no restart support, only planned restarts, or both planned and unplanned restarts. This object is persistent and when written the entity SHOULD save the change to non-volatile storage.
.1.3.6.1.2.1.14.1.19,OSPF-MIB::ospfRestartInterval,Integer32,read-write,,current,,Configured OSPF graceful restart timeout interval. This object is persistent and when written the entity SHOULD save the change to non-volatile storage.
.1.3.6.1.2.1.14.1.20,OSPF-MIB::ospfRestartStrictLsaChecking,INTEGER,read-write,,current,true(1):false(2),Indicates if strict LSA checking is enabled for graceful restart. This object is persistent and when written the entity SHOULD save the change to non-volatile storage.
.1.3.6.1.2.1.14.1.21,OSPF-MIB::ospfRestartStatus,INTEGER,read-only,,current,notRestarting(1):plannedRestart(2):unplannedRestart(3),Current status of OSPF graceful restart.
.1.3.6.1.2.1.14.1.22,OSPF-MIB::ospfRestartAge,Unsigned32,read-only,,current,,Remaining time in current OSPF graceful restart interval.
.1.3.6.1.2.1.14.1.23,OSPF-MIB::ospfRestartExitReason,INTEGER,read-only,,current,none(1):inProgress(2):completed(3):timedOut(4):topologyChanged(5),Describes the outcome of the last attempt at a graceful restart. If the value is 'none', no restart has yet been attempted. If the value is 'inProgress', a restart attempt is currently underway.
.1.3.6.1.2.1.14.1.24,OSPF-MIB::ospfAsLsaCount,Gauge32,read-only,,current,,The number of AS-scope link state advertisements in the AS-scope link state database.
.1.3.6.1.2.1.14.1.25,OSPF-MIB::ospfAsLsaCksumSum,Unsigned32,read-only,,current,,The 32-bit unsigned sum of the LS checksums of the AS link state advertisements contained in the AS-scope link state database. This sum can be used to determine if there has been a change in a router's AS-scope link state database, and to compare the AS-scope link state database of two routers.
.1.3.6.1.2.1.14.1.26,OSPF-MIB::ospfStubRouterSupport,INTEGER,read-only,,current,true(1):false(2),The router's support for stub router functionality.
.1.3.6.1.2.1.14.1.27,OSPF-MIB::ospfStubRouterAdvertisement,INTEGER,read-write,,current,doNotAdvertise(1):advertise(2),This object controls the advertisement of stub router LSAs by the router. The value doNotAdvertise will result in the advertisement of a standard router LSA and is the default value. This object is persistent and when written the entity SHOULD save the change to non-volatile storage.
.1.3.6.1.2.1.14.1.28,OSPF-MIB::ospfDiscontinuityTime,TimeTicks,read-only,,current,,The value of sysUpTime on the most recent occasion at which any one of this MIB's counters suffered a discontinuity. If no such discontinuities have occurred since the last re-initialization of the local management subsystem, then this object contains a zero value.
.1.3.6.1.2.1.14.2,OSPF-MIB::ospfAreaTable,,not-accessible,,current,,Information describing the configured parameters and cumulative statistics of the router's attached areas. The interfaces and virtual links are configured as part of these areas. Area 0.0.0.0, by definition, is the backbone area.
.1.3.6.1.2.1.14.2.1,OSPF-MIB::ospfAreaEntry,,not-accessible,ospfAreaId,current,,Information describing the configured parameters and cumulative statistics of one of the router's attached areas. The interfaces and virtual links are configured as part of these areas. Area 0.0.0.0, by definition, is the backbone area. Information in this table is persistent and when this object is written the entity SHOULD save the change to non-volatile storage.
.1.3.6.1.2.1.14.2.1.1,OSPF-MIB::ospfAreaId,IpAddress,read-only,,current,,A 32-bit integer uniquely identifying an area. Area ID 0.0.0.0 is used for the OSPF backbone.
.1.3.6.1.2.1.14.2.1.2,OSPF-MIB::ospfAuthType,INTEGER,read-create,,obsolete,none(0):simplePassword(1):md5(2),The authentication type specified for an area.
.1.3.6.1.2.1.14.2.1.3,OSPF-MIB::ospfImportAsExtern,INTEGER,read-create,,current,importExternal(1):importNoExternal(2):importNssa(3),Indicates if an area is a stub area, NSSA, or standard area. Type-5 AS-external LSAs and type-11 Opaque LSAs are not imported into stub areas or NSSAs. NSSAs import AS-external data as type-7 LSAs
.1.3.6.1.2.1.14.2.1.4,OSPF-MIB::ospfSpfRuns,Counter32,read-only,,current,,The number of times that the intra-area route table has been calculated using this area's link state database. This is typically done using Dijkstra's algorithm. Discontinuities in the value of this counter can occur at re-initialization of the management system, and at other times as indicated by the value of ospfDiscontinuityTime.
.1.3.6.1.2.1.14.2.1.5,OSPF-MIB::ospfAreaBdrRtrCount,Gauge32,read-only,,current,,The total number of Area Border Routers reachable within this area. This is initially zero and is calculated in each Shortest Path First (SPF) pass.
.1.3.6.1.2.1.14.2.1.6,OSPF-MIB::ospfAsBdrRtrCount,Gauge32,read-only,,current,,The total number of Autonomous System Border Routers reachable within this area. This is initially zero and is calculated in each SPF pass.
.1.3.6.1.2.1.14.2.1.7,OSPF-MIB::ospfAreaLsaCount,Gauge32,read-only,,current,,The total number of link state advertisements in this area's link state database, excluding AS-external LSAs.
.1.3.6.1.2.1.14.2.1.8,OSPF-MIB::ospfAreaLsaCksumSum,Integer32,read-only,,current,,The 32-bit sum of the link state advertisements' LS checksums contained in this area's link state database. This sum excludes external (LS type-5) link state advertisements. The sum can be used to determine if there has been a change in a router's link state database, and to compare the link state database of two routers. The value should be treated as unsigned when comparing two sums of checksums.
.1.3.6.1.2.1.14.2.1.9,OSPF-MIB::ospfAreaSummary,INTEGER,read-create,,current,noAreaSummary(1):sendAreaSummary(2),The variable ospfAreaSummary controls the import of summary LSAs into stub and NSSA areas. It has no effect on other areas. If it is noAreaSummary, the router will not originate summary LSAs into the stub or NSSA area. It will rely entirely on its default route. If it is sendAreaSummary, the router will both summarize and propagate summary LSAs.
.1.3.6.1.2.1.14.2.1.10,OSPF-MIB::ospfAreaStatus,INTEGER,read-create,,current,active(1):notInService(2):notReady(3):createAndGo(4):createAndWait(5):destroy(6),This object permits management of the table by facilitating actions such as row creation, construction, and destruction. The value of this object has no effect on whether other objects in this conceptual row can be modified.
.1.3.6.1.2.1.14.2.1.11,OSPF-MIB::ospfAreaNssaTranslatorRole,INTEGER,read-create,,current,always(1):candidate(2),Indicates an NSSA border router's ability to perform NSSA translation of type-7 LSAs into type-5 LSAs.
.1.3.6.1.2.1.14.2.1.12,OSPF-MIB::ospfAreaNssaTranslatorState,INTEGER,read-only,,current,enabled(1):elected(2):disabled(3),Indicates if and how an NSSA border router is performing NSSA translation of type-7 LSAs into type-5 LSAs. When this object is set to enabled, the NSSA Border router's OspfAreaNssaExtTranslatorRole has been set to always. When this object is set to elected, a candidate NSSA Border router is Translating type-7 LSAs into type-5. When this object is set to disabled, a candidate NSSA border router is NOT translating type-7 LSAs into type-5.
.1.3.6.1.2.1.14.2.1.13,OSPF-MIB::ospfAreaNssaTranslatorStabilityInterval,Integer32,read-create,,current,,The number of seconds after an elected translator determines its services are no longer required, that it should continue to perform its translation duties.
.1.3.6.1.2.1.14.2.1.14,OSPF-MIB::ospfAreaNssaTranslatorEvents,Counter32,read-only,,current,,Indicates the number of translator state changes that have occurred since the last boot-up. Discontinuities in the value of this counter can occur at re-initialization of the management system, and at other times as indicated by the value of ospfDiscontinuityTime.
.1.3.6.1.2.1.14.3,OSPF-MIB::ospfStubAreaTable,,not-accessible,,current,,The set of metrics that will be advertised by a default Area Border Router into a stub area.
.1.3.6.1.2.1.14.3.1,OSPF-MIB::ospfStubAreaEntry,,not-accessible,ospfStubAreaId:ospfStubTOS,current,,The metric for a given Type of Service that will be advertised by a default Area Border Router into a stub area. Information in this table is persistent and when this object is written the entity SHOULD save the change to non-volatile storage.
.1.3.6.1.2.1.14.3.1.1,OSPF-MIB::ospfStubAreaId,IpAddress,read-only,,current,,The 32-bit identifier for the stub area. On creation, this can be derived from the instance.
.1.3.6.1.2.1.14.3.1.2,OSPF-MIB::ospfStubTOS,Integer32,read-only,,current,,The Type of Service associated with the metric. On creation, this can be derived from the instance.
.1.3.6.1.2.1.14.3.1.3,OSPF-MIB::ospfStubMetric,Integer32,read-create,,current,,The metric value applied at the indicated Type of Service. By default, this equals the least metric at the Type of Service among the interfaces to other areas.
.1.3.6.1.2.1.14.3.1.4,OSPF-MIB::ospfStubStatus,INTEGER,read-create,,current,active(1):notInService(2):notReady(3):createAndGo(4):createAndWait(5):destroy(6),This object permits management of the table by facilitating actions such as row creation, construction, and destruction. The value of this object has no effect on whether other objects in this conceptual row can be modified.
.1.3.6.1.2.1.14.3.1.5,OSPF-MIB::ospfStubMetricType,INTEGER,read-create,,current,ospfMetric(1):comparableCost(2):nonComparable(3),This variable displays the type of metric advertised as a default route.
.1.3.6.1.2.1.14.4,OSPF-MIB::ospfLsdbTable,,not-accessible,,current,,The OSPF Process's link state database (LSDB). The LSDB contains the link state advertisements from throughout the areas that the device is attached to.
.1.3.6.1.2.1.14.4.1,OSPF-MIB::ospfLsdbEntry,,not-accessible,ospfLsdbAreaId:ospfLsdbType:ospfLsdbLsid:ospfLsdbRouterId,current,,A single link state advertisement.
.1.3.6.1.2.1.14.4.1.1,OSPF-MIB::ospfLsdbAreaId,IpAddress,read-only,,current,,The 32-bit identifier of the area from which the LSA was received.
.1.3.6.1.2.1.14.4.1.2,OSPF-MIB::ospfLsdbType,INTEGER,read-only,,current,routerLink(1):networkLink(2):summaryLink(3):asSummaryLink(4):asExternalLink(5):multicastLink(6):nssaExternalLink(7):areaOpaqueLink(10),The type of the link state advertisement. Each link state type has a separate advertisement format. Note: External link state advertisements are permitted for backward compatibility, but should be displayed in the ospfAsLsdbTable rather than here.
.1.3.6.1.2.1.14.4.1.3,OSPF-MIB::ospfLsdbLsid,IpAddress,read-only,,current,,The Link State ID is an LS Type Specific field containing either a Router ID or an IP address; it identifies the piece of the routing domain that is being described by the advertisement.
.1.3.6.1.2.1.14.4.1.4,OSPF-MIB::ospfLsdbRouterId,IpAddress,read-only,,current,,The 32-bit number that uniquely identifies the originating router in the Autonomous System.
.1.3.6.1.2.1.14.4.1.5,OSPF-MIB::ospfLsdbSequence,Integer32,read-only,,current,,The sequence number field is a signed 32-bit integer. It starts with the value '80000001'h, or -'7FFFFFFF'h, and increments until '7FFFFFFF'h. Thus, a typical sequence number will be very negative. It is used to detect old and duplicate Link State Advertisements. The space of sequence numbers is linearly ordered. The larger the sequence number, the more recent the advertisement.
.1.3.6.1.2.1.14.4.1.6,OSPF-MIB::ospfLsdbAge,Integer32,read-only,,current,,This field is the age of the link state advertisement in seconds.
.1.3.6.1.2.1.14.4.1.7,OSPF-MIB::ospfLsdbChecksum,Integer32,read-only,,current,,This field is the checksum of the complete contents of the advertisement, excepting the age field. The age field is excepted so that an advertisement's age can be incremented without updating the checksum. The checksum used is the same that is used for ISO connectionless datagrams; it is commonly referred to as the Fletcher checksum.
.1.3.6.1.2.1.14.4.1.8,OSPF-MIB::ospfLsdbAdvertisement,OCTET,read-only,,current,,The entire link state advertisement, including its header. Note that for variable length LSAs, SNMP agents may not be able to return the largest string size.
.1.3.6.1.2.1.14.5,OSPF-MIB::ospfAreaRangeTable,,not-accessible,,obsolete,,The Address Range Table acts as an adjunct to the Area Table. It describes those Address Range Summaries that are configured to be propagated from an Area to reduce the amount of information about it that is known beyond its borders. It contains a set of IP address ranges specified by an IP address/IP network mask pair. For example, class B address range of X.X.X.X with a network mask of 255.255.0.0 includes all IP addresses from X.X.0.0 to X.X.255.255. Note that this table is obsoleted and is replaced by the Area Aggregate Table.
.1.3.6.1.2.1.14.5.1,OSPF-MIB::ospfAreaRangeEntry,,not-accessible,ospfAreaRangeAreaId:ospfAreaRangeNet,obsolete,,A single area address range. Information in this table is persistent and when this object is written the entity SHOULD save the change to non-volatile storage.
.1.3.6.1.2.1.14.5.1.1,OSPF-MIB::ospfAreaRangeAreaId,IpAddress,read-only,,obsolete,,The area that the address range is to be found within.
.1.3.6.1.2.1.14.5.1.2,OSPF-MIB::ospfAreaRangeNet,IpAddress,read-only,,obsolete,,The IP address of the net or subnet indicated by the range.
.1.3.6.1.2.1.14.5.1.3,OSPF-MIB::ospfAreaRangeMask,IpAddress,read-create,,obsolete,,The subnet mask that pertains to the net or subnet.
.1.3.6.1.2.1.14.5.1.4,OSPF-MIB::ospfAreaRangeStatus,INTEGER,read-create,,obsolete,active(1):notInService(2):notReady(3):createAndGo(4):createAndWait(5):destroy(6),This object permits management of the table by facilitating actions such as row creation, construction, and destruction. The value of this object has no effect on whether other objects in this conceptual row can be modified.
.1.3.6.1.2.1.14.5.1.5,OSPF-MIB::ospfAreaRangeEffect,INTEGER,read-create,,obsolete,advertiseMatching(1):doNotAdvertiseMatching(2),Subnets subsumed by ranges either trigger the advertisement of the indicated summary (advertiseMatching) or result in the subnet's not being advertised at all outside the area.
.1.3.6.1.2.1.14.6,OSPF-MIB::ospfHostTable,,not-accessible,,current,,The Host/Metric Table indicates what hosts are directly attached to the router, what metrics and types of service should be advertised for them, and what areas they are found within.
.1.3.6.1.2.1.14.6.1,OSPF-MIB::ospfHostEntry,,not-accessible,ospfHostIpAddress:ospfHostTOS,current,,A metric to be advertised, for a given type of service, when a given host is reachable. Information in this table is persistent and when this object is written the entity SHOULD save the change to non-volatile storage.
.1.3.6.1.2.1.14.6.1.1,OSPF-MIB::ospfHostIpAddress,IpAddress,read-only,,current,,The IP address of the host.
.1.3.6.1.2.1.14.6.1.2,OSPF-MIB::ospfHostTOS,Integer32,read-only,,current,,The Type of Service of the route being configured.
.1.3.6.1.2.1.14.6.1.3,OSPF-MIB::ospfHostMetric,Integer32,read-create,,current,,The metric to be advertised.
.1.3.6.1.2.1.14.6.1.4,OSPF-MIB::ospfHostStatus,INTEGER,read-create,,current,active(1):notInService(2):notReady(3):createAndGo(4):createAndWait(5):destroy(6),This object permits management of the table by facilitating actions such as row creation, construction, and destruction. The value of this object has no effect on whether other objects in this conceptual row can be modified.
.1.3.6.1.2.1.14.6.1.5,OSPF-MIB::ospfHostAreaID,IpAddress,read-only,,deprecated,,The OSPF area to which the host belongs. Deprecated by ospfHostCfgAreaID.
.1.3.6.1.2.1.14.6.1.6,OSPF-MIB::ospfHostCfgAreaID,IpAddress,read-create,,current,,To configure the OSPF area to which the host belongs.
.1.3.6.1.2.1.14.7,OSPF-MIB::ospfIfTable,,not-accessible,,current,,The OSPF Interface Table describes the interfaces from the viewpoint of OSPF. It augments the ipAddrTable with OSPF specific information.
.1.3.6.1.2.1.14.7.1,OSPF-MIB::ospfIfEntry,,not-accessible,ospfIfIpAddress:ospfAddressLessIf,current,,The OSPF interface entry describes one interface from the viewpoint of OSPF. Information in this table is persistent and when this object is written the entity SHOULD save the change to non-volatile storage.
.1.3.6.1.2.1.14.7.1.1,OSPF-MIB::ospfIfIpAddress,IpAddress,read-only,,current,,The IP address of this OSPF interface.
.1.3.6.1.2.1.14.7.1.2,OSPF-MIB::ospfAddressLessIf,Integer32,read-only,,current,,For the purpose of easing the instancing of addressed and addressless interfaces; this variable takes the value 0 on interfaces with IP addresses and the corresponding value of ifIndex for interfaces having no IP address.
.1.3.6.1.2.1.14.7.1.3,OSPF-MIB::ospfIfAreaId,IpAddress,read-create,,current,,A 32-bit integer uniquely identifying the area to which the interface connects. Area ID 0.0.0.0 is used for the OSPF backbone.
.1.3.6.1.2.1.14.7.1.4,OSPF-MIB::ospfIfType,INTEGER,read-create,,current,broadcast(1):nbma(2):pointToPoint(3):pointToMultipoint(5),The OSPF interface type. By way of a default, this field may be intuited from the corresponding value of ifType. Broadcast LANs, such as Ethernet and IEEE 802.5, take the value 'broadcast', X.25 and similar technologies take the value 'nbma', and links that are definitively point to point take the value 'pointToPoint'.
.1.3.6.1.2.1.14.7.1.5,OSPF-MIB::ospfIfAdminStat,INTEGER,read-create,,current,enabled(1):disabled(2),The OSPF interface's administrative status. The value formed on the interface, and the interface will be advertised as an internal route to some area. The value 'disabled' denotes that the interface is external to OSPF.
.1.3.6.1.2.1.14.7.1.6,OSPF-MIB::ospfIfRtrPriority,Integer32,read-create,,current,,The priority of this interface. Used in multi-access networks, this field is used in the designated router election algorithm. The value 0 signifies that the router is not eligible to become the designated router on this particular network. In the event of a tie in this value, routers will use their Router ID as a tie breaker.
.1.3.6.1.2.1.14.7.1.7,OSPF-MIB::ospfIfTransitDelay,Integer32,read-create,,current,,The estimated number of seconds it takes to transmit a link state update packet over this interface. Note that the minimal value SHOULD be 1 second.
.1.3.6.1.2.1.14.7.1.8,OSPF-MIB::ospfIfRetransInterval,Integer32,read-create,,current,,The number of seconds between link state advertisement retransmissions, for adjacencies belonging to this interface. This value is also used when retransmitting database description and Link State request packets. Note that minimal value SHOULD be 1 second.
.1.3.6.1.2.1.14.7.1.9,OSPF-MIB::ospfIfHelloInterval,Integer32,read-create,,current,,The length of time, in seconds, between the Hello packets that the router sends on the interface. This value must be the same for all routers attached to a common network.
.1.3.6.1.2.1.14.7.1.10,OSPF-MIB::ospfIfRtrDeadInterval,Integer32,read-create,,current,,The number of seconds that a router's Hello packets have not been seen before its neighbors declare the router down. This should be some multiple of the Hello interval. This value must be the same for all routers attached to a common network.
.1.3.6.1.2.1.14.7.1.11,OSPF-MIB::ospfIfPollInterval,Integer32,read-create,,current,,The larger time interval, in seconds, between the Hello packets sent to an inactive non-broadcast multi-access neighbor.
.1.3.6.1.2.1.14.7.1.12,OSPF-MIB::ospfIfState,INTEGER,read-only,,current,down(1):loopback(2):waiting(3):pointToPoint(4):designatedRouter(5):backupDesignatedRouter(6):otherDesignatedRouter(7),The OSPF Interface State.
.1.3.6.1.2.1.14.7.1.13,OSPF-MIB::ospfIfDesignatedRouter,IpAddress,read-only,,current,,The IP address of the designated router.
.1.3.6.1.2.1.14.7.1.14,OSPF-MIB::ospfIfBackupDesignatedRouter,IpAddress,read-only,,current,,The IP address of the backup designated router.
.1.3.6.1.2.1.14.7.1.15,OSPF-MIB::ospfIfEvents,Counter32,read-only,,current,,The number of times this OSPF interface has changed its state or an error has occurred. Discontinuities in the value of this counter can occur at re-initialization of the management system, and at other times as indicated by the value of ospfDiscontinuityTime.
.1.3.6.1.2.1.14.7.1.16,OSPF-MIB::ospfIfAuthKey,OCTET,read-create,,current,,The cleartext password used as an OSPF authentication key when simplePassword security is enabled. This object does not access any OSPF cryptogaphic (e.g., MD5) authentication key under any circumstance. If the key length is shorter than 8 octets, the agent will left adjust and zero fill to 8 octets. Unauthenticated interfaces need no authentication key, and simple password authentication cannot use a key of more than 8 octets. Note that the use of simplePassword authentication is NOT recommended when there is concern regarding attack upon the OSPF system. SimplePassword authentication is only sufficient to protect against accidental misconfigurations because it re-uses cleartext passwords [RFC1704]. When read, ospfIfAuthKey always returns an octet string of length zero.
.1.3.6.1.2.1.14.7.1.17,OSPF-MIB::ospfIfStatus,INTEGER,read-create,,current,active(1):notInService(2):notReady(3):createAndGo(4):createAndWait(5):destroy(6),This object permits management of the table by facilitating actions such as row creation, construction, and destruction. The value of this object has no effect on whether other objects in this conceptual row can be modified.
.1.3.6.1.2.1.14.7.1.18,OSPF-MIB::ospfIfMulticastForwarding,INTEGER,read-create,,current,blocked(1):multicast(2):unicast(3),The way multicasts should be forwarded on this interface: not forwarded, forwarded as data link multicasts, or forwarded as data link unicasts. Data link multicasting is not meaningful on point-to-point and NBMA interfaces, and setting ospfMulticastForwarding to 0 effectively disables all multicast forwarding.
.1.3.6.1.2.1.14.7.1.19,OSPF-MIB::ospfIfDemand,INTEGER,read-create,,current,true(1):false(2),Indicates whether Demand OSPF procedures (hello suppression to FULL neighbors and setting the DoNotAge flag on propagated LSAs) should be performed on this interface.
.1.3.6.1.2.1.14.7.1.20,OSPF-MIB::ospfIfAuthType,INTEGER,read-create,,current,none(0):simplePassword(1):md5(2),The authentication type specified for an interface. Note that this object can be used to engage in significant attacks against an OSPF router.
.1.3.6.1.2.1.14.7.1.21,OSPF-MIB::ospfIfLsaCount,Gauge32,read-only,,current,,The total number of link-local link state advertisements in this interface's link-local link state database.
.1.3.6.1.2.1.14.7.1.22,OSPF-MIB::ospfIfLsaCksumSum,Unsigned32,read-only,,current,,The 32-bit unsigned sum of the Link State Advertisements' LS checksums contained in this interface's link-local link state database. The sum can be used to determine if there has been a change in the interface's link state database and to compare the interface link state database of routers attached to the same subnet.
.1.3.6.1.2.1.14.7.1.23,OSPF-MIB::ospfIfDesignatedRouterId,IpAddress,read-only,,current,,The Router ID of the designated router.
.1.3.6.1.2.1.14.7.1.24,OSPF-MIB::ospfIfBackupDesignatedRouterId,IpAddress,read-only,,current,,The Router ID of the backup designated router.
.1.3.6.1.2.1.14.8,OSPF-MIB::ospfIfMetricTable,,not-accessible,,current,,The Metric Table describes the metrics to be advertised for a specified interface at the various types of service. As such, this table is an adjunct of the OSPF Interface Table. Types of service, as defined by RFC 791, have the ability to request low delay, high bandwidth, or reliable linkage. For the purposes of this specification, the measure of bandwidth: Metric = referenceBandwidth / ifSpeed is the default value. The default reference bandwidth is 10^8. For multiple link interfaces, note that ifSpeed is the sum of the individual link speeds. This yields a number having the following typical values: Network Type/bit rate Metric >= 100 MBPS 1 Ethernet/802.3 10 E1 48 T1 (ESF) 65 64 KBPS 1562 56 KBPS 1785 19.2 KBPS 5208 9.6 KBPS 10416 Routes that are not specified use the default (TOS 0) metric. Note that the default reference bandwidth can be configured using the general group object ospfReferenceBandwidth.
.1.3.6.1.2.1.14.8.1,OSPF-MIB::ospfIfMetricEntry,,not-accessible,ospfIfMetricIpAddress:ospfIfMetricAddressLessIf:ospfIfMetricTOS,current,,A particular TOS metric for a non-virtual interface identified by the interface index. Information in this table is persistent and when this object is written the entity SHOULD save the change to non-volatile storage.
.1.3.6.1.2.1.14.8.1.1,OSPF-MIB::ospfIfMetricIpAddress,IpAddress,read-only,,current,,The IP address of this OSPF interface. On row creation, this can be derived from the instance.
.1.3.6.1.2.1.14.8.1.2,OSPF-MIB::ospfIfMetricAddressLessIf,Integer32,read-only,,current,,For the purpose of easing the instancing of addressed and addressless interfaces; this variable takes the value 0 on interfaces with IP addresses and the value of ifIndex for interfaces having no IP address. On row creation, this can be derived from the instance.
.1.3.6.1.2.1.14.8.1.3,OSPF-MIB::ospfIfMetricTOS,Integer32,read-only,,current,,The Type of Service metric being referenced. On row creation, this can be derived from the instance.
.1.3.6.1.2.1.14.8.1.4,OSPF-MIB::ospfIfMetricValue,Integer32,read-create,,current,,The metric of using this Type of Service on this interface. The default value of the TOS 0 metric is 10^8 / ifSpeed.
.1.3.6.1.2.1.14.8.1.5,OSPF-MIB::ospfIfMetricStatus,INTEGER,read-create,,current,active(1):notInService(2):notReady(3):createAndGo(4):createAndWait(5):destroy(6),This object permits management of the table by facilitating actions such as row creation, construction, and destruction. The value of this object has no effect on whether other objects in this conceptual row can be modified.
.1.3.6.1.2.1.14.9,OSPF-MIB::ospfVirtIfTable,,not-accessible,,current,,Information about this router's virtual interfaces that the OSPF Process is configured to carry on.
.1.3.6.1.2.1.14.9.1,OSPF-MIB::ospfVirtIfEntry,,not-accessible,ospfVirtIfAreaId:ospfVirtIfNeighbor,current,,Information about a single virtual interface. Information in this table is persistent and when this object is written the entity SHOULD save the change to non-volatile storage.
.1.3.6.1.2.1.14.9.1.1,OSPF-MIB::ospfVirtIfAreaId,IpAddress,read-only,,current,,The transit area that the virtual link traverses. By definition, this is not 0.0.0.0.
.1.3.6.1.2.1.14.9.1.2,OSPF-MIB::ospfVirtIfNeighbor,IpAddress,read-only,,current,,The Router ID of the virtual neighbor.
.1.3.6.1.2.1.14.9.1.3,OSPF-MIB::ospfVirtIfTransitDelay,Integer32,read-create,,current,,The estimated number of seconds it takes to transmit a Link State update packet over this interface. Note that the minimal value SHOULD be 1 second.
.1.3.6.1.2.1.14.9.1.4,OSPF-MIB::ospfVirtIfRetransInterval,Integer32,read-create,,current,,The number of seconds between link state avertisement retransmissions, for adjacencies belonging to this interface. This value is also used when retransmitting database description and Link State request packets. This value should be well over the expected round-trip time. Note that the minimal value SHOULD be 1 second.
.1.3.6.1.2.1.14.9.1.5,OSPF-MIB::ospfVirtIfHelloInterval,Integer32,read-create,,current,,The length of time, in seconds, between the Hello packets that the router sends on the interface. This value must be the same for the virtual neighbor.
.1.3.6.1.2.1.14.9.1.6,OSPF-MIB::ospfVirtIfRtrDeadInterval,Integer32,read-create,,current,,The number of seconds that a router's Hello packets have not been seen before its neighbors declare the router down. This should be some multiple of the Hello interval. This value must be the same for the virtual neighbor.
.1.3.6.1.2.1.14.9.1.7,OSPF-MIB::ospfVirtIfState,INTEGER,read-only,,current,down(1):pointToPoint(4),OSPF virtual interface states.
.1.3.6.1.2.1.14.9.1.8,OSPF-MIB::ospfVirtIfEvents,Counter32,read-only,,current,,The number of state changes or error events on this virtual link. Discontinuities in the value of this counter can occur at re-initialization of the management system, and at other times as indicated by the value of ospfDiscontinuityTime.
.1.3.6.1.2.1.14.9.1.9,OSPF-MIB::ospfVirtIfAuthKey,OCTET,read-create,,current,,The cleartext password used as an OSPF authentication key when simplePassword security is enabled. This object does not access any OSPF cryptogaphic (e.g., MD5) authentication key under any circumstance. If the key length is shorter than 8 octets, the agent will left adjust and zero fill to 8 octets. Unauthenticated interfaces need no authentication key, and simple password authentication cannot use a key of more than 8 octets. Note that the use of simplePassword authentication is NOT recommended when there is concern regarding attack upon the OSPF system. SimplePassword authentication is only sufficient to protect against accidental misconfigurations because it re-uses cleartext passwords. [RFC1704] When read, ospfIfAuthKey always returns an octet string of length zero.
.1.3.6.1.2.1.14.9.1.10,OSPF-MIB::ospfVirtIfStatus,INTEGER,read-create,,current,active(1):notInService(2):notReady(3):createAndGo(4):createAndWait(5):destroy(6),This object permits management of the table by facilitating actions such as row creation, construction, and destruction. The value of this object has no effect on whether other objects in this conceptual row can be modified.
.1.3.6.1.2.1.14.9.1.11,OSPF-MIB::ospfVirtIfAuthType,INTEGER,read-create,,current,none(0):simplePassword(1):md5(2),The authentication type specified for a virtual interface. Note that this object can be used to engage in significant attacks against an OSPF router.
.1.3.6.1.2.1.14.9.1.12,OSPF-MIB::ospfVirtIfLsaCount,Gauge32,read-only,,current,,The total number of link-local link state advertisements in this virtual interface's link-local link state database.
.1.3.6.1.2.1.14.9.1.13,OSPF-MIB::ospfVirtIfLsaCksumSum,Unsigned32,read-only,,current,,The 32-bit unsigned sum of the link state advertisements' LS checksums contained in this virtual interface's link-local link state database. The sum can be used to determine if there has been a change in the virtual interface's link state database, and to compare the virtual interface link state database of the virtual neighbors.
.1.3.6.1.2.1.14.10,OSPF-MIB::ospfNbrTable,,not-accessible,,current,,A table describing all non-virtual neighbors in the locality of the OSPF router.
.1.3.6.1.2.1.14.10.1,OSPF-MIB::ospfNbrEntry,,not-accessible,ospfNbrIpAddr:ospfNbrAddressLessIndex,current,,The information regarding a single neighbor. Information in this table is persistent and when this object is written the entity SHOULD save the change to non-volatile storage.
.1.3.6.1.2.1.14.10.1.1,OSPF-MIB::ospfNbrIpAddr,IpAddress,read-only,,current,,The IP address this neighbor is using in its IP source address. Note that, on addressless links, this will not be 0.0.0.0 but the address of another of the neighbor's interfaces.
.1.3.6.1.2.1.14.10.1.2,OSPF-MIB::ospfNbrAddressLessIndex,Integer32,read-only,,current,,On an interface having an IP address, zero. On addressless interfaces, the corresponding value of ifIndex in the Internet Standard MIB. On row creation, this can be derived from the instance.
.1.3.6.1.2.1.14.10.1.3,OSPF-MIB::ospfNbrRtrId,IpAddress,read-only,,current,,A 32-bit integer (represented as a type IpAddress) uniquely identifying the neighboring router in the Autonomous System.
.1.3.6.1.2.1.14.10.1.4,OSPF-MIB::ospfNbrOptions,Integer32,read-only,,current,,A bit mask corresponding to the neighbor's options field. Bit 0, if set, indicates that the system will operate on Type of Service metrics other than TOS 0. If zero, the neighbor will ignore all metrics except the TOS 0 metric. Bit 1, if set, indicates that the associated area accepts and operates on external information; if zero, it is a stub area. Bit 2, if set, indicates that the system is capable of routing IP multicast datagrams, that is that it implements the multicast extensions to OSPF. Bit 3, if set, indicates that the associated area is an NSSA. These areas are capable of carrying type-7 external advertisements, which are translated into type-5 external advertisements at NSSA borders.
.1.3.6.1.2.1.14.10.1.5,OSPF-MIB::ospfNbrPriority,Integer32,read-create,,current,,The priority of this neighbor in the designated router election algorithm. The value 0 signifies that the neighbor is not eligible to become the designated router on this particular network.
.1.3.6.1.2.1.14.10.1.6,OSPF-MIB::ospfNbrState,INTEGER,read-only,,current,down(1):attempt(2):init(3):twoWay(4):exchangeStart(5):exchange(6):loading(7):full(8),The state of the relationship with this neighbor.
.1.3.6.1.2.1.14.10.1.7,OSPF-MIB::ospfNbrEvents,Counter32,read-only,,current,,The number of times this neighbor relationship has changed state or an error has occurred. Discontinuities in the value of this counter can occur at re-initialization of the management system, and at other times as indicated by the value of ospfDiscontinuityTime.
.1.3.6.1.2.1.14.10.1.8,OSPF-MIB::ospfNbrLsRetransQLen,Gauge32,read-only,,current,,The current length of the retransmission queue.
.1.3.6.1.2.1.14.10.1.9,OSPF-MIB::ospfNbmaNbrStatus,INTEGER,read-create,,current,active(1):notInService(2):notReady(3):createAndGo(4):createAndWait(5):destroy(6),This object permits management of the table by facilitating actions such as row creation, construction, and destruction. The value of this object has no effect on whether other objects in this conceptual row can be modified.
.1.3.6.1.2.1.14.10.1.10,OSPF-MIB::ospfNbmaNbrPermanence,INTEGER,read-only,,current,dynamic(1):permanent(2),This variable displays the status of the entry; 'dynamic' and 'permanent' refer to how the neighbor became known.
.1.3.6.1.2.1.14.10.1.11,OSPF-MIB::ospfNbrHelloSuppressed,INTEGER,read-only,,current,true(1):false(2),Indicates whether Hellos are being suppressed to the neighbor.
.1.3.6.1.2.1.14.10.1.12,OSPF-MIB::ospfNbrRestartHelperStatus,INTEGER,read-only,,current,notHelping(1):helping(2),Indicates whether the router is acting as a graceful restart helper for the neighbor.
.1.3.6.1.2.1.14.10.1.13,OSPF-MIB::ospfNbrRestartHelperAge,Unsigned32,read-only,,current,,Remaining time in current OSPF graceful restart interval, if the router is acting as a restart helper for the neighbor.
.1.3.6.1.2.1.14.10.1.14,OSPF-MIB::ospfNbrRestartHelperExitReason,INTEGER,read-only,,current,none(1):inProgress(2):completed(3):timedOut(4):topologyChanged(5),Describes the outcome of the last attempt at acting as a graceful restart helper for the neighbor.
.1.3.6.1.2.1.14.11,OSPF-MIB::ospfVirtNbrTable,,not-accessible,,current,,This table describes all virtual neighbors. Since virtual links are configured in the Virtual Interface Table, this table is read-only.
.1.3.6.1.2.1.14.11.1,OSPF-MIB::ospfVirtNbrEntry,,not-accessible,ospfVirtNbrArea:ospfVirtNbrRtrId,current,,Virtual neighbor information.
.1.3.6.1.2.1.14.11.1.1,OSPF-MIB::ospfVirtNbrArea,IpAddress,read-only,,current,,The Transit Area Identifier.
.1.3.6.1.2.1.14.11.1.2,OSPF-MIB::ospfVirtNbrRtrId,IpAddress,read-only,,current,,A 32-bit integer uniquely identifying the neighboring router in the Autonomous System.
.1.3.6.1.2.1.14.11.1.3,OSPF-MIB::ospfVirtNbrIpAddr,IpAddress,read-only,,current,,The IP address this virtual neighbor is using.
.1.3.6.1.2.1.14.11.1.4,OSPF-MIB::ospfVirtNbrOptions,Integer32,read-only,,current,,A bit mask corresponding to the neighbor's options field. Bit 1, if set, indicates that the system will operate on Type of Service metrics other than TOS 0. If zero, the neighbor will ignore all metrics except the TOS 0 metric. Bit 2, if set, indicates that the system is network multicast capable, i.e., that it implements OSPF multicast routing.
.1.3.6.1.2.1.14.11.1.5,OSPF-MIB::ospfVirtNbrState,INTEGER,read-only,,current,down(1):attempt(2):init(3):twoWay(4):exchangeStart(5):exchange(6):loading(7):full(8),The state of the virtual neighbor relationship.
.1.3.6.1.2.1.14.11.1.6,OSPF-MIB::ospfVirtNbrEvents,Counter32,read-only,,current,,The number of times this virtual link has changed its state or an error has occurred. Discontinuities in the value of this counter can occur at re-initialization of the management system, and at other times as indicated by the value of ospfDiscontinuityTime.
.1.3.6.1.2.1.14.11.1.7,OSPF-MIB::ospfVirtNbrLsRetransQLen,Gauge32,read-only,,current,,The current length of the retransmission queue.
.1.3.6.1.2.1.14.11.1.8,OSPF-MIB::ospfVirtNbrHelloSuppressed,INTEGER,read-only,,current,true(1):false(2),Indicates whether Hellos are being suppressed to the neighbor.
.1.3.6.1.2.1.14.11.1.9,OSPF-MIB::ospfVirtNbrRestartHelperStatus,INTEGER,read-only,,current,notHelping(1):helping(2),Indicates whether the router is acting as a graceful restart helper for the neighbor.
.1.3.6.1.2.1.14.11.1.10,OSPF-MIB::ospfVirtNbrRestartHelperAge,Unsigned32,read-only,,current,,Remaining time in current OSPF graceful restart interval, if the router is acting as a restart helper for the neighbor.
.1.3.6.1.2.1.14.11.1.11,OSPF-MIB::ospfVirtNbrRestartHelperExitReason,INTEGER,read-only,,current,none(1):inProgress(2):completed(3):timedOut(4):topologyChanged(5),Describes the outcome of the last attempt at acting as a graceful restart helper for the neighbor.
.1.3.6.1.2.1.14.12,OSPF-MIB::ospfExtLsdbTable,,not-accessible,,deprecated,,The OSPF Process's external LSA link state database. This table is identical to the OSPF LSDB Table in format, but contains only external link state advertisements. The purpose is to allow external LSAs to be displayed once for the router rather than once in each non-stub area. Note that external LSAs are also in the AS-scope link state database.
.1.3.6.1.2.1.14.12.1,OSPF-MIB::ospfExtLsdbEntry,,not-accessible,ospfExtLsdbType:ospfExtLsdbLsid:ospfExtLsdbRouterId,deprecated,,A single link state advertisement.
.1.3.6.1.2.1.14.12.1.1,OSPF-MIB::ospfExtLsdbType,INTEGER,read-only,,deprecated,asExternalLink(5),The type of the link state advertisement. Each link state type has a separate advertisement format.
.1.3.6.1.2.1.14.12.1.2,OSPF-MIB::ospfExtLsdbLsid,IpAddress,read-only,,deprecated,,The Link State ID is an LS Type Specific field containing either a Router ID or an IP address; it identifies the piece of the routing domain that is being described by the advertisement.
.1.3.6.1.2.1.14.12.1.3,OSPF-MIB::ospfExtLsdbRouterId,IpAddress,read-only,,deprecated,,The 32-bit number that uniquely identifies the originating router in the Autonomous System.
.1.3.6.1.2.1.14.12.1.4,OSPF-MIB::ospfExtLsdbSequence,Integer32,read-only,,deprecated,,The sequence number field is a signed 32-bit integer. It starts with the value '80000001'h, or -'7FFFFFFF'h, and increments until '7FFFFFFF'h. Thus, a typical sequence number will be very negative. It is used to detect old and duplicate link state advertisements. The space of sequence numbers is linearly ordered. The larger the sequence number, the more recent the advertisement.
.1.3.6.1.2.1.14.12.1.5,OSPF-MIB::ospfExtLsdbAge,Integer32,read-only,,deprecated,,This field is the age of the link state advertisement in seconds.
.1.3.6.1.2.1.14.12.1.6,OSPF-MIB::ospfExtLsdbChecksum,Integer32,read-only,,deprecated,,This field is the checksum of the complete contents of the advertisement, excepting the age field. The age field is excepted so that an advertisement's age can be incremented without updating the checksum. The checksum used is the same that is used for ISO connectionless datagrams; it is commonly referred to as the Fletcher checksum.
.1.3.6.1.2.1.14.12.1.7,OSPF-MIB::ospfExtLsdbAdvertisement,OCTET,read-only,,deprecated,,The entire link state advertisement, including its header.
.1.3.6.1.2.1.14.13,OSPF-MIB::ospfRouteGroup,,,,,,
.1.3.6.1.2.1.14.13.1,OSPF-MIB::ospfIntraArea,,,,,,
.1.3.6.1.2.1.14.13.2,OSPF-MIB::ospfInterArea,,,,,,
.1.3.6.1.2.1.14.13.3,OSPF-MIB::ospfExternalType1,,,,,,
.1.3.6.1.2.1.14.13.4,OSPF-MIB::ospfExternalType2,,,,,,
.1.3.6.1.2.1.14.14,OSPF-MIB::ospfAreaAggregateTable,,not-accessible,,current,,The Area Aggregate Table acts as an adjunct to the Area Table. It describes those address aggregates that are configured to be propagated from an area. Its purpose is to reduce the amount of information that is known beyond an Area's borders. It contains a set of IP address ranges specified by an IP address/IP network mask pair. For example, a class B address range of X.X.X.X with a network mask of 255.255.0.0 includes all IP addresses from X.X.0.0 to X.X.255.255. Note that if ranges are configured such that one range subsumes another range (e.g., 10.0.0.0 mask 255.0.0.0 and 10.1.0.0 mask 255.255.0.0), the most specific match is the preferred one.
.1.3.6.1.2.1.14.14.1,OSPF-MIB::ospfAreaAggregateEntry,,not-accessible,ospfAreaAggregateAreaID:ospfAreaAggregateLsdbType:ospfAreaAggregateNet:ospfAreaAggregateMask,current,,A single area aggregate entry. Information in this table is persistent and when this object is written the entity SHOULD save the change to non-volatile storage.
.1.3.6.1.2.1.14.14.1.1,OSPF-MIB::ospfAreaAggregateAreaID,IpAddress,read-only,,current,,The area within which the address aggregate is to be found.
.1.3.6.1.2.1.14.14.1.2,OSPF-MIB::ospfAreaAggregateLsdbType,INTEGER,read-only,,current,summaryLink(3):nssaExternalLink(7),The type of the address aggregate. This field specifies the Lsdb type that this address aggregate applies to.
.1.3.6.1.2.1.14.14.1.3,OSPF-MIB::ospfAreaAggregateNet,IpAddress,read-only,,current,,The IP address of the net or subnet indicated by the range.
.1.3.6.1.2.1.14.14.1.4,OSPF-MIB::ospfAreaAggregateMask,IpAddress,read-only,,current,,The subnet mask that pertains to the net or subnet.
.1.3.6.1.2.1.14.14.1.5,OSPF-MIB::ospfAreaAggregateStatus,INTEGER,read-create,,current,active(1):notInService(2):notReady(3):createAndGo(4):createAndWait(5):destroy(6),This object permits management of the table by facilitating actions such as row creation, construction, and destruction. The value of this object has no effect on whether other objects in this conceptual row can be modified.
.1.3.6.1.2.1.14.14.1.6,OSPF-MIB::ospfAreaAggregateEffect,INTEGER,read-create,,current,advertiseMatching(1):doNotAdvertiseMatching(2),Subnets subsumed by ranges either trigger the advertisement of the indicated aggregate (advertiseMatching) or result in the subnet's not being advertised at all outside the area.
.1.3.6.1.2.1.14.14.1.7,OSPF-MIB::ospfAreaAggregateExtRouteTag,Unsigned32,read-create,,current,,External route tag to be included in NSSA (type-7) LSAs.
.1.3.6.1.2.1.14.15,OSPF-MIB::ospfConformance,,,,,,
.1.3.6.1.2.1.14.15.1,OSPF-MIB::ospfGroups,,,,,,
.1.3.6.1.2.1.14.15.1.1,OSPF-MIB::ospfBasicGroup,,,,,,These objects are used to monitor/manage global OSPF parameters. This object group conforms to RFC 1850.
.1.3.6.1.2.1.14.15.1.2,OSPF-MIB::ospfAreaGroup,,,,,,These objects are used for OSPF systems supporting areas per RFC 1850.
.1.3.6.1.2.1.14.15.1.3,OSPF-MIB::ospfStubAreaGroup,,,,,,These objects are used for OSPF systems supporting stub areas.
.1.3.6.1.2.1.14.15.1.4,OSPF-MIB::ospfLsdbGroup,,,,,,These objects are used for OSPF systems that display their link state database.
.1.3.6.1.2.1.14.15.1.5,OSPF-MIB::ospfAreaRangeGroup,,,,,,These objects are used for non-CIDR OSPF systems that support multiple areas. This object group is obsolete.
.1.3.6.1.2.1.14.15.1.6,OSPF-MIB::ospfHostGroup,,,,,,These objects are used for OSPF systems that support attached hosts.
.1.3.6.1.2.1.14.15.1.7,OSPF-MIB::ospfIfGroup,,,,,,These objects are used to monitor/manage OSPF interfaces. This object group conforms to RFC 1850.
.1.3.6.1.2.1.14.15.1.8,OSPF-MIB::ospfIfMetricGroup,,,,,,These objects are used for OSPF systems for supporting interface metrics.
.1.3.6.1.2.1.14.15.1.9,OSPF-MIB::ospfVirtIfGroup,,,,,,These objects are used for OSPF systems for supporting virtual interfaces. This object group conforms to RFC 1850.
.1.3.6.1.2.1.14.15.1.10,OSPF-MIB::ospfNbrGroup,,,,,,These objects are used to monitor/manage OSPF neighbors. This object group conforms to RFC 1850.
.1.3.6.1.2.1.14.15.1.11,OSPF-MIB::ospfVirtNbrGroup,,,,,,These objects are used to monitor/manage OSPF virtual neighbors. This object group conforms to RFC 1850.
.1.3.6.1.2.1.14.15.1.12,OSPF-MIB::ospfExtLsdbGroup,,,,,,These objects are used for OSPF systems that display their link state database. This object group conforms to RFC 1850. This object group is replaced by the ospfAsLsdbGroup in order to support any AS-scope LSA type in a single table.
.1.3.6.1.2.1.14.15.1.13,OSPF-MIB::ospfAreaAggregateGroup,,,,,,These objects are used for OSPF systems to support network prefix aggregation across areas.
.1.3.6.1.2.1.14.15.1.14,OSPF-MIB::ospfLocalLsdbGroup,,,,,,These objects are used for OSPF systems that display their link-local link state databases for non-virtual links.
.1.3.6.1.2.1.14.15.1.15,OSPF-MIB::ospfVirtLocalLsdbGroup,,,,,,These objects are used for OSPF systems that display their link-local link state databases for virtual links.
.1.3.6.1.2.1.14.15.1.16,OSPF-MIB::ospfAsLsdbGroup,,,,,,These objects are used for OSPF systems that display their AS-scope link state database.
.1.3.6.1.2.1.14.15.1.17,OSPF-MIB::ospfBasicGroup2,,,,,,These objects are used to monitor/manage OSPF global parameters.
.1.3.6.1.2.1.14.15.1.18,OSPF-MIB::ospfAreaGroup2,,,,,,These objects are used by OSPF systems to support areas.
.1.3.6.1.2.1.14.15.1.19,OSPF-MIB::ospfIfGroup2,,,,,,These objects are used to monitor/manage OSPF interfaces.
.1.3.6.1.2.1.14.15.1.20,OSPF-MIB::ospfVirtIfGroup2,,,,,,These objects are used to monitor/manage OSPF virtual interfaces.
.1.3.6.1.2.1.14.15.1.21,OSPF-MIB::ospfNbrGroup2,,,,,,These objects are used to monitor/manage OSPF neighbors.
.1.3.6.1.2.1.14.15.1.22,OSPF-MIB::ospfVirtNbrGroup2,,,,,,These objects are used to monitor/manage OSPF virtual neighbors.
.1.3.6.1.2.1.14.15.1.23,OSPF-MIB::ospfAreaAggregateGroup2,,,,,,These objects are used for OSPF systems to support network prefix aggregation across areas.
.1.3.6.1.2.1.14.15.1.24,OSPF-MIB::ospfAreaLsaCountGroup,,,,,,These objects are used for OSPF systems that display per-area, per-LSA-type counters.
.1.3.6.1.2.1.14.15.1.25,OSPF-MIB::ospfHostGroup2,,,,,,These objects are used for OSPF systems that support attached hosts.
.1.3.6.1.2.1.14.15.1.26,OSPF-MIB::ospfObsoleteGroup,,,,,,These objects are obsolete and are no longer required for OSPF systems. They are placed into this group for SMI conformance.
.1.3.6.1.2.1.14.15.2,OSPF-MIB::ospfCompliances,,,,,,
.1.3.6.1.2.1.14.15.2.1,OSPF-MIB::ospfCompliance,,,,,,The compliance statement for OSPF systems conforming to RFC 1850.
.1.3.6.1.2.1.14.15.2.2,OSPF-MIB::ospfCompliance2,,,,,,The compliance statement.
.1.3.6.1.2.1.14.15.2.3,OSPF-MIB::ospfComplianceObsolete,,,,,,Contains obsolete object groups.
.1.3.6.1.2.1.14.17,OSPF-MIB::ospfLocalLsdbTable,,not-accessible,,current,,The OSPF Process's link-local link state database for non-virtual links. This table is identical to the OSPF LSDB Table in format, but contains only link-local Link State Advertisements for non-virtual links. The purpose is to allow link-local LSAs to be displayed for each non-virtual interface. This table is implemented to support type-9 LSAs that are defined in 'The OSPF Opaque LSA Option'.
.1.3.6.1.2.1.14.17.1,OSPF-MIB::ospfLocalLsdbEntry,,not-accessible,ospfLocalLsdbIpAddress:ospfLocalLsdbAddressLessIf:ospfLocalLsdbType:ospfLocalLsdbLsid:ospfLocalLsdbRouterId,current,,A single link state advertisement.
.1.3.6.1.2.1.14.17.1.1,OSPF-MIB::ospfLocalLsdbIpAddress,IpAddress,not-accessible,,current,,The IP address of the interface from which the LSA was received if the interface is numbered.
.1.3.6.1.2.1.14.17.1.2,OSPF-MIB::ospfLocalLsdbAddressLessIf,Integer32,not-accessible,,current,,The interface index of the interface from which the LSA was received if the interface is unnumbered.
.1.3.6.1.2.1.14.17.1.3,OSPF-MIB::ospfLocalLsdbType,INTEGER,not-accessible,,current,localOpaqueLink(9),The type of the link state advertisement. Each link state type has a separate advertisement format.
.1.3.6.1.2.1.14.17.1.4,OSPF-MIB::ospfLocalLsdbLsid,IpAddress,not-accessible,,current,,The Link State ID is an LS Type Specific field containing a 32-bit identifier in IP address format; it identifies the piece of the routing domain that is being described by the advertisement.
.1.3.6.1.2.1.14.17.1.5,OSPF-MIB::ospfLocalLsdbRouterId,IpAddress,not-accessible,,current,,The 32-bit number that uniquely identifies the originating router in the Autonomous System.
.1.3.6.1.2.1.14.17.1.6,OSPF-MIB::ospfLocalLsdbSequence,Integer32,read-only,,current,,The sequence number field is a signed 32-bit integer. It starts with the value '80000001'h, or -'7FFFFFFF'h, and increments until '7FFFFFFF'h. Thus, a typical sequence number will be very negative. It is used to detect old and duplicate link state advertisements. The space of sequence numbers is linearly ordered. The larger the sequence number, the more recent the advertisement.
.1.3.6.1.2.1.14.17.1.7,OSPF-MIB::ospfLocalLsdbAge,Integer32,read-only,,current,,This field is the age of the link state advertisement in seconds.
.1.3.6.1.2.1.14.17.1.8,OSPF-MIB::ospfLocalLsdbChecksum,Integer32,read-only,,current,,This field is the checksum of the complete contents of the advertisement, excepting the age field. The age field is excepted so that an advertisement's age can be incremented without updating the checksum. The checksum used is the same that is used for ISO connectionless datagrams; it is commonly referred to as the Fletcher checksum.
.1.3.6.1.2.1.14.17.1.9,OSPF-MIB::ospfLocalLsdbAdvertisement,OCTET,read-only,,current,,The entire link state advertisement, including its header. Note that for variable length LSAs, SNMP agents may not be able to return the largest string size.
.1.3.6.1.2.1.14.18,OSPF-MIB::ospfVirtLocalLsdbTable,,not-accessible,,current,,The OSPF Process's link-local link state database for virtual links. This table is identical to the OSPF LSDB Table in format, but contains only link-local Link State Advertisements for virtual links. The purpose is to allow link-local LSAs to be displayed for each virtual interface. This table is implemented to support type-9 LSAs that are defined in 'The OSPF Opaque LSA Option'.
.1.3.6.1.2.1.14.18.1,OSPF-MIB::ospfVirtLocalLsdbEntry,,not-accessible,ospfVirtLocalLsdbTransitArea:ospfVirtLocalLsdbNeighbor:ospfVirtLocalLsdbType:ospfVirtLocalLsdbLsid:ospfVirtLocalLsdbRouterId,current,,A single link state advertisement.
.1.3.6.1.2.1.14.18.1.1,OSPF-MIB::ospfVirtLocalLsdbTransitArea,IpAddress,not-accessible,,current,,The transit area that the virtual link traverses. By definition, this is not 0.0.0.0.
.1.3.6.1.2.1.14.18.1.2,OSPF-MIB::ospfVirtLocalLsdbNeighbor,IpAddress,not-accessible,,current,,The Router ID of the virtual neighbor.
.1.3.6.1.2.1.14.18.1.3,OSPF-MIB::ospfVirtLocalLsdbType,INTEGER,not-accessible,,current,localOpaqueLink(9),The type of the link state advertisement. Each link state type has a separate advertisement format.
.1.3.6.1.2.1.14.18.1.4,OSPF-MIB::ospfVirtLocalLsdbLsid,IpAddress,not-accessible,,current,,The Link State ID is an LS Type Specific field containing a 32-bit identifier in IP address format; it identifies the piece of the routing domain that is being described by the advertisement.
.1.3.6.1.2.1.14.18.1.5,OSPF-MIB::ospfVirtLocalLsdbRouterId,IpAddress,not-accessible,,current,,The 32-bit number that uniquely identifies the originating router in the Autonomous System.
.1.3.6.1.2.1.14.18.1.6,OSPF-MIB::ospfVirtLocalLsdbSequence,Integer32,read-only,,current,,The sequence number field is a signed 32-bit integer. It starts with the value '80000001'h, or -'7FFFFFFF'h, and increments until '7FFFFFFF'h. Thus, a typical sequence number will be very negative. It is used to detect old and duplicate link state advertisements. The space of sequence numbers is linearly ordered. The larger the sequence number, the more recent the advertisement.
.1.3.6.1.2.1.14.18.1.7,OSPF-MIB::ospfVirtLocalLsdbAge,Integer32,read-only,,current,,This field is the age of the link state advertisement in seconds.
.1.3.6.1.2.1.14.18.1.8,OSPF-MIB::ospfVirtLocalLsdbChecksum,Integer32,read-only,,current,,This field is the checksum of the complete contents of the advertisement, excepting the age field. The age field is excepted so that an advertisement's age can be incremented without updating the checksum. The checksum used is the same that is used for ISO connectionless datagrams; it is commonly referred to as the Fletcher checksum.
.1.3.6.1.2.1.14.18.1.9,OSPF-MIB::ospfVirtLocalLsdbAdvertisement,OCTET,read-only,,current,,The entire link state advertisement, including its header.
.1.3.6.1.2.1.14.19,OSPF-MIB::ospfAsLsdbTable,,not-accessible,,current,,The OSPF Process's AS-scope LSA link state database. The database contains the AS-scope Link State Advertisements from throughout the areas that the device is attached to. This table is identical to the OSPF LSDB Table in format, but contains only AS-scope Link State Advertisements. The purpose is to allow AS-scope LSAs to be displayed once for the router rather than once in each non-stub area.
.1.3.6.1.2.1.14.19.1,OSPF-MIB::ospfAsLsdbEntry,,not-accessible,ospfAsLsdbType:ospfAsLsdbLsid:ospfAsLsdbRouterId,current,,A single link state advertisement.
.1.3.6.1.2.1.14.19.1.1,OSPF-MIB::ospfAsLsdbType,INTEGER,not-accessible,,current,asExternalLink(5):asOpaqueLink(11),The type of the link state advertisement. Each link state type has a separate advertisement format.
.1.3.6.1.2.1.14.19.1.2,OSPF-MIB::ospfAsLsdbLsid,IpAddress,not-accessible,,current,,The Link State ID is an LS Type Specific field containing either a Router ID or an IP address; it identifies the piece of the routing domain that is being described by the advertisement.
.1.3.6.1.2.1.14.19.1.3,OSPF-MIB::ospfAsLsdbRouterId,IpAddress,not-accessible,,current,,The 32-bit number that uniquely identifies the originating router in the Autonomous System.
.1.3.6.1.2.1.14.19.1.4,OSPF-MIB::ospfAsLsdbSequence,Integer32,read-only,,current,,The sequence number field is a signed 32-bit integer. It starts with the value '80000001'h, or -'7FFFFFFF'h, and increments until '7FFFFFFF'h. Thus, a typical sequence number will be very negative. It is used to detect old and duplicate link state advertisements. The space of sequence numbers is linearly ordered. The larger the sequence number, the more recent the advertisement.
.1.3.6.1.2.1.14.19.1.5,OSPF-MIB::ospfAsLsdbAge,Integer32,read-only,,current,,This field is the age of the link state advertisement in seconds.
.1.3.6.1.2.1.14.19.1.6,OSPF-MIB::ospfAsLsdbChecksum,Integer32,read-only,,current,,This field is the checksum of the complete contents of the advertisement, excepting the age field. The age field is excepted so that an advertisement's age can be incremented without updating the checksum. The checksum used is the same that is used for ISO connectionless datagrams; it is commonly referred to as the Fletcher checksum.
.1.3.6.1.2.1.14.19.1.7,OSPF-MIB::ospfAsLsdbAdvertisement,OCTET,read-only,,current,,The entire link state advertisement, including its header.
.1.3.6.1.2.1.14.20,OSPF-MIB::ospfAreaLsaCountTable,,not-accessible,,current,,This table maintains per-area, per-LSA-type counters
.1.3.6.1.2.1.14.20.1,OSPF-MIB::ospfAreaLsaCountEntry,,not-accessible,ospfAreaLsaCountAreaId:ospfAreaLsaCountLsaType,current,,An entry with a number of link advertisements of a given type for a given area.
.1.3.6.1.2.1.14.20.1.1,OSPF-MIB::ospfAreaLsaCountAreaId,IpAddress,not-accessible,,current,,This entry Area ID.
.1.3.6.1.2.1.14.20.1.2,OSPF-MIB::ospfAreaLsaCountLsaType,INTEGER,not-accessible,,current,routerLink(1):networkLink(2):summaryLink(3):asSummaryLink(4):multicastLink(6):nssaExternalLink(7):areaOpaqueLink(10),This entry LSA type.
.1.3.6.1.2.1.14.20.1.3,OSPF-MIB::ospfAreaLsaCountNumber,Gauge32,read-only,,current,,Number of LSAs of a given type for a given area.
.1.3.6.1.2.1.16,RMON-MIB::rmon,,,,,,
.1.3.6.1.2.1.16.0,RMON-MIB::rmonEventsV2,,,,,,Definition point for RMON notifications.
.1.3.6.1.2.1.16.0.1,RMON-MIB::risingAlarm,,,,,,The SNMP trap that is generated when an alarm entry crosses its rising threshold and generates an event that is configured for sending SNMP traps.
.1.3.6.1.2.1.16.0.2,RMON-MIB::fallingAlarm,,,,,,The SNMP trap that is generated when an alarm entry crosses its falling threshold and generates an event that is configured for sending SNMP traps.
.1.3.6.1.2.1.16.1,RMON-MIB::statistics,,,,,,
.1.3.6.1.2.1.16.1.1,RMON-MIB::etherStatsTable,,not-accessible,,current,,A list of Ethernet statistics entries.
.1.3.6.1.2.1.16.1.1.1,RMON-MIB::etherStatsEntry,,not-accessible,etherStatsIndex,current,,A collection of statistics kept for a particular Ethernet interface. As an example, an instance of the etherStatsPkts object might be named etherStatsPkts.1
.1.3.6.1.2.1.16.1.1.1.1,RMON-MIB::etherStatsIndex,Integer32,read-only,,current,,The value of this object uniquely identifies this etherStats entry.
.1.3.6.1.2.1.16.1.1.1.2,RMON-MIB::etherStatsDataSource,OBJECT,read-create,,current,,This object identifies the source of the data that this etherStats entry is configured to analyze. This source can be any ethernet interface on this device. In order to identify a particular interface, this object shall identify the instance of the ifIndex object, defined in RFC 2233 [17], for the desired interface. For example, if an entry were to receive data from interface #1, this object would be set to ifIndex.1. The statistics in this group reflect all packets on the local network segment attached to the identified interface. An agent may or may not be able to tell if fundamental changes to the media of the interface have occurred and necessitate an invalidation of this entry. For example, a hot-pluggable ethernet card could be pulled out and replaced by a token-ring card. In such a case, if the agent has such knowledge of the change, it is recommended that it invalidate this entry. This object may not be modified if the associated etherStatsStatus object is equal to valid(1).
.1.3.6.1.2.1.16.1.1.1.3,RMON-MIB::etherStatsDropEvents,Counter32,read-only,,current,,The total number of events in which packets were dropped by the probe due to lack of resources. Note that this number is not necessarily the number of packets dropped; it is just the number of times this condition has been detected.
.1.3.6.1.2.1.16.1.1.1.4,RMON-MIB::etherStatsOctets,Counter32,read-only,,current,,The total number of octets of data (including those in bad packets) received on the network (excluding framing bits but including FCS octets). This object can be used as a reasonable estimate of 10-Megabit ethernet utilization. If greater precision is desired, the etherStatsPkts and etherStatsOctets objects should be sampled before and after a common interval. The differences in the sampled values are Pkts and Octets, respectively, and the number of seconds in the interval is Interval. These values are used to calculate the Utilization as follows: Pkts * (9.6 + 6.4) + (Octets * .8) Utilization = ------------------------------------- Interval * 10,000 The result of this equation is the value Utilization which is the percent utilization of the ethernet segment on a scale of 0 to 100 percent.
.1.3.6.1.2.1.16.1.1.1.5,RMON-MIB::etherStatsPkts,Counter32,read-only,,current,,The total number of packets (including bad packets, broadcast packets, and multicast packets) received.
.1.3.6.1.2.1.16.1.1.1.6,RMON-MIB::etherStatsBroadcastPkts,Counter32,read-only,,current,,The total number of good packets received that were directed to the broadcast address. Note that this does not include multicast packets.
.1.3.6.1.2.1.16.1.1.1.7,RMON-MIB::etherStatsMulticastPkts,Counter32,read-only,,current,,The total number of good packets received that were directed to a multicast address. Note that this number does not include packets directed to the broadcast address.
.1.3.6.1.2.1.16.1.1.1.8,RMON-MIB::etherStatsCRCAlignErrors,Counter32,read-only,,current,,The total number of packets received that had a length (excluding framing bits, but including FCS octets) of between 64 and 1518 octets, inclusive, but had either a bad Frame Check Sequence (FCS) with an integral number of octets (FCS Error) or a bad FCS with a non-integral number of octets (Alignment Error).
.1.3.6.1.2.1.16.1.1.1.9,RMON-MIB::etherStatsUndersizePkts,Counter32,read-only,,current,,The total number of packets received that were less than 64 octets long (excluding framing bits, but including FCS octets) and were otherwise well formed.
.1.3.6.1.2.1.16.1.1.1.10,RMON-MIB::etherStatsOversizePkts,Counter32,read-only,,current,,The total number of packets received that were longer than 1518 octets (excluding framing bits, but including FCS octets) and were otherwise well formed.
.1.3.6.1.2.1.16.1.1.1.11,RMON-MIB::etherStatsFragments,Counter32,read-only,,current,,The total number of packets received that were less than 64 octets in length (excluding framing bits but including FCS octets) and had either a bad Frame Check Sequence (FCS) with an integral number of octets (FCS Error) or a bad FCS with a non-integral number of octets (Alignment Error). Note that it is entirely normal for etherStatsFragments to increment. This is because it counts both runts (which are normal occurrences due to collisions) and noise hits.
.1.3.6.1.2.1.16.1.1.1.12,RMON-MIB::etherStatsJabbers,Counter32,read-only,,current,,The total number of packets received that were longer than 1518 octets (excluding framing bits, but including FCS octets), and had either a bad Frame Check Sequence (FCS) with an integral number of octets (FCS Error) or a bad FCS with a non-integral number of octets (Alignment Error). Note that this definition of jabber is different than the definition in IEEE-802.3 section 8.2.1.5 (10BASE5) and section 10.3.1.4 (10BASE2). These documents define jabber as the condition where any packet exceeds 20 ms. The allowed range to detect jabber is between 20 ms and 150 ms.
.1.3.6.1.2.1.16.1.1.1.13,RMON-MIB::etherStatsCollisions,Counter32,read-only,,current,,The best estimate of the total number of collisions on this Ethernet segment. The value returned will depend on the location of the RMON probe. Section 8.2.1.3 (10BASE-5) and section 10.3.1.3 (10BASE-2) of IEEE standard 802.3 states that a station must detect a collision, in the receive mode, if three or more stations are transmitting simultaneously. A repeater port must detect a collision when two or more stations are transmitting simultaneously. Thus a probe placed on a repeater port could record more collisions than a probe connected to a station on the same segment would. Probe location plays a much smaller role when considering 10BASE-T. 14.2.1.4 (10BASE-T) of IEEE standard 802.3 defines a collision as the simultaneous presence of signals on the DO and RD circuits (transmitting and receiving at the same time). A 10BASE-T station can only detect collisions when it is transmitting. Thus probes placed on a station and a repeater, should report the same number of collisions. Note also that an RMON probe inside a repeater should ideally report collisions between the repeater and one or more other hosts (transmit collisions as defined by IEEE 802.3k) plus receiver collisions observed on any coax segments to which the repeater is connected.
.1.3.6.1.2.1.16.1.1.1.14,RMON-MIB::etherStatsPkts64Octets,Counter32,read-only,,current,,The total number of packets (including bad packets) received that were 64 octets in length (excluding framing bits but including FCS octets).
.1.3.6.1.2.1.16.1.1.1.15,RMON-MIB::etherStatsPkts65to127Octets,Counter32,read-only,,current,,The total number of packets (including bad packets) received that were between 65 and 127 octets in length inclusive (excluding framing bits but including FCS octets).
.1.3.6.1.2.1.16.1.1.1.16,RMON-MIB::etherStatsPkts128to255Octets,Counter32,read-only,,current,,The total number of packets (including bad packets) received that were between 128 and 255 octets in length inclusive (excluding framing bits but including FCS octets).
.1.3.6.1.2.1.16.1.1.1.17,RMON-MIB::etherStatsPkts256to511Octets,Counter32,read-only,,current,,The total number of packets (including bad packets) received that were between 256 and 511 octets in length inclusive (excluding framing bits but including FCS octets).
.1.3.6.1.2.1.16.1.1.1.18,RMON-MIB::etherStatsPkts512to1023Octets,Counter32,read-only,,current,,The total number of packets (including bad packets) received that were between 512 and 1023 octets in length inclusive (excluding framing bits but including FCS octets).
.1.3.6.1.2.1.16.1.1.1.19,RMON-MIB::etherStatsPkts1024to1518Octets,Counter32,read-only,,current,,The total number of packets (including bad packets) received that were between 1024 and 1518 octets in length inclusive (excluding framing bits but including FCS octets).
.1.3.6.1.2.1.16.1.1.1.20,RMON-MIB::etherStatsOwner,OCTET,read-create,,current,,The entity that configured this entry and is therefore using the resources assigned to it.
.1.3.6.1.2.1.16.1.1.1.21,RMON-MIB::etherStatsStatus,INTEGER,read-create,,current,valid(1):createRequest(2):underCreation(3):invalid(4),The status of this etherStats entry.
.1.3.6.1.2.1.16.1.2,TOKEN-RING-RMON-MIB::tokenRingMLStatsTable,,not-accessible,,mandatory,,A list of Mac-Layer Token Ring statistics entries.
.1.3.6.1.2.1.16.1.2.1,TOKEN-RING-RMON-MIB::tokenRingMLStatsEntry,,not-accessible,tokenRingMLStatsIndex,mandatory,,A collection of Mac-Layer statistics kept for a particular Token Ring interface.
.1.3.6.1.2.1.16.1.2.1.1,TOKEN-RING-RMON-MIB::tokenRingMLStatsIndex,INTEGER,read-only,,mandatory,,The value of this object uniquely identifies this tokenRingMLStats entry.
.1.3.6.1.2.1.16.1.2.1.2,TOKEN-RING-RMON-MIB::tokenRingMLStatsDataSource,OBJECT,read-write,,mandatory,,This object identifies the source of the data that this tokenRingMLStats entry is configured to analyze. This source can be any tokenRing interface on this device. In order to identify a particular interface, this object shall identify the instance of the ifIndex object, defined in MIB-II [3], for the desired interface. For example, if an entry were to receive data from interface #1, this object would be set to ifIndex.1. The statistics in this group reflect all error reports on the local network segment attached to the identified interface. This object may not be modified if the associated tokenRingMLStatsStatus object is equal to valid(1).
.1.3.6.1.2.1.16.1.2.1.3,TOKEN-RING-RMON-MIB::tokenRingMLStatsDropEvents,Counter32,read-only,,mandatory,,The total number of events in which packets were dropped by the probe due to lack of resources. Note that this number is not necessarily the number of packets dropped; it is just the number of times this condition has been detected. This value is the same as the corresponding tokenRingPStatsDropEvents.
.1.3.6.1.2.1.16.1.2.1.4,TOKEN-RING-RMON-MIB::tokenRingMLStatsMacOctets,Counter32,read-only,,mandatory,,The total number of octets of data in MAC packets (excluding those that were not good frames) received on the network (excluding framing bits but including FCS octets).
.1.3.6.1.2.1.16.1.2.1.5,TOKEN-RING-RMON-MIB::tokenRingMLStatsMacPkts,Counter32,read-only,,mandatory,,The total number of MAC packets (excluding packets that were not good frames) received.
.1.3.6.1.2.1.16.1.2.1.6,TOKEN-RING-RMON-MIB::tokenRingMLStatsRingPurgeEvents,Counter32,read-only,,mandatory,,The total number of times that the ring enters the ring purge state from normal ring state. The ring purge state that comes in response to the claim token or beacon state is not counted.
.1.3.6.1.2.1.16.1.2.1.7,TOKEN-RING-RMON-MIB::tokenRingMLStatsRingPurgePkts,Counter32,read-only,,mandatory,,The total number of ring purge MAC packets detected by probe.
.1.3.6.1.2.1.16.1.2.1.8,TOKEN-RING-RMON-MIB::tokenRingMLStatsBeaconEvents,Counter32,read-only,,mandatory,,The total number of times that the ring enters a beaconing state (beaconFrameStreamingState, beaconBitStreamingState, beaconSetRecoveryModeState, or beaconRingSignalLossState) from a non-beaconing state. Note that a change of the source address of the beacon packet does not constitute a new beacon event.
.1.3.6.1.2.1.16.1.2.1.9,TOKEN-RING-RMON-MIB::tokenRingMLStatsBeaconTime,INTEGER,read-only,,mandatory,,The total amount of time that the ring has been in the beaconing state.
.1.3.6.1.2.1.16.1.2.1.10,TOKEN-RING-RMON-MIB::tokenRingMLStatsBeaconPkts,Counter32,read-only,,mandatory,,The total number of beacon MAC packets detected by the probe.
.1.3.6.1.2.1.16.1.2.1.11,TOKEN-RING-RMON-MIB::tokenRingMLStatsClaimTokenEvents,Counter32,read-only,,mandatory,,The total number of times that the ring enters the claim token state from normal ring state or ring purge state. The claim token state that comes in response to a beacon state is not counted.
.1.3.6.1.2.1.16.1.2.1.12,TOKEN-RING-RMON-MIB::tokenRingMLStatsClaimTokenPkts,Counter32,read-only,,mandatory,,The total number of claim token MAC packets detected by the probe.
.1.3.6.1.2.1.16.1.2.1.13,TOKEN-RING-RMON-MIB::tokenRingMLStatsNAUNChanges,Counter32,read-only,,mandatory,,The total number of NAUN changes detected by the probe.
.1.3.6.1.2.1.16.1.2.1.14,TOKEN-RING-RMON-MIB::tokenRingMLStatsLineErrors,Counter32,read-only,,mandatory,,The total number of line errors reported in error reporting packets detected by the probe.
.1.3.6.1.2.1.16.1.2.1.15,TOKEN-RING-RMON-MIB::tokenRingMLStatsInternalErrors,Counter32,read-only,,mandatory,,The total number of adapter internal errors reported in error reporting packets detected by the probe.
.1.3.6.1.2.1.16.1.2.1.16,TOKEN-RING-RMON-MIB::tokenRingMLStatsBurstErrors,Counter32,read-only,,mandatory,,The total number of burst errors reported in error reporting packets detected by the probe.
.1.3.6.1.2.1.16.1.2.1.17,TOKEN-RING-RMON-MIB::tokenRingMLStatsACErrors,Counter32,read-only,,mandatory,,The total number of AC (Address Copied) errors reported in error reporting packets detected by the probe.
.1.3.6.1.2.1.16.1.2.1.18,TOKEN-RING-RMON-MIB::tokenRingMLStatsAbortErrors,Counter32,read-only,,mandatory,,The total number of abort delimiters reported in error reporting packets detected by the probe.
.1.3.6.1.2.1.16.1.2.1.19,TOKEN-RING-RMON-MIB::tokenRingMLStatsLostFrameErrors,Counter32,read-only,,mandatory,,The total number of lost frame errors reported in error reporting packets detected by the probe.
.1.3.6.1.2.1.16.1.2.1.20,TOKEN-RING-RMON-MIB::tokenRingMLStatsCongestionErrors,Counter32,read-only,,mandatory,,The total number of receive congestion errors reported in error reporting packets detected by the probe.
.1.3.6.1.2.1.16.1.2.1.21,TOKEN-RING-RMON-MIB::tokenRingMLStatsFrameCopiedErrors,Counter32,read-only,,mandatory,,The total number of frame copied errors reported in error reporting packets detected by the probe.
.1.3.6.1.2.1.16.1.2.1.22,TOKEN-RING-RMON-MIB::tokenRingMLStatsFrequencyErrors,Counter32,read-only,,mandatory,,The total number of frequency errors reported in error reporting packets detected by the probe.
.1.3.6.1.2.1.16.1.2.1.23,TOKEN-RING-RMON-MIB::tokenRingMLStatsTokenErrors,Counter32,read-only,,mandatory,,The total number of token errors reported in error reporting packets detected by the probe.
.1.3.6.1.2.1.16.1.2.1.24,TOKEN-RING-RMON-MIB::tokenRingMLStatsSoftErrorReports,Counter32,read-only,,mandatory,,The total number of soft error report frames detected by the probe.
.1.3.6.1.2.1.16.1.2.1.25,TOKEN-RING-RMON-MIB::tokenRingMLStatsRingPollEvents,Counter32,read-only,,mandatory,,The total number of ring poll events detected by the probe (i.e. the number of ring polls initiated by the active monitor that were detected).
.1.3.6.1.2.1.16.1.2.1.26,TOKEN-RING-RMON-MIB::tokenRingMLStatsOwner,OCTET,read-write,,mandatory,,The entity that configured this entry and is therefore using the resources assigned to it.
.1.3.6.1.2.1.16.1.2.1.27,TOKEN-RING-RMON-MIB::tokenRingMLStatsStatus,INTEGER,read-write,,mandatory,valid(1):createRequest(2):underCreation(3):invalid(4),The status of this tokenRingMLStats entry.
.1.3.6.1.2.1.16.1.3,TOKEN-RING-RMON-MIB::tokenRingPStatsTable,,not-accessible,,mandatory,,A list of promiscuous Token Ring statistics entries.
.1.3.6.1.2.1.16.1.3.1,TOKEN-RING-RMON-MIB::tokenRingPStatsEntry,,not-accessible,tokenRingPStatsIndex,mandatory,,A collection of promiscuous statistics kept for non-MAC packets on a particular Token Ring interface.
.1.3.6.1.2.1.16.1.3.1.1,TOKEN-RING-RMON-MIB::tokenRingPStatsIndex,INTEGER,read-only,,mandatory,,The value of this object uniquely identifies this tokenRingPStats entry.
.1.3.6.1.2.1.16.1.3.1.2,TOKEN-RING-RMON-MIB::tokenRingPStatsDataSource,OBJECT,read-write,,mandatory,,This object identifies the source of the data that this tokenRingPStats entry is configured to analyze. This source can be any tokenRing interface on this device. In order to identify a particular interface, this object shall identify the instance of the ifIndex object, defined in MIB-II [3], for the desired interface. For example, if an entry were to receive data from interface #1, this object would be set to ifIndex.1. The statistics in this group reflect all non-MAC packets on the local network segment attached to the identified interface. This object may not be modified if the associated tokenRingPStatsStatus object is equal to valid(1).
.1.3.6.1.2.1.16.1.3.1.3,TOKEN-RING-RMON-MIB::tokenRingPStatsDropEvents,Counter32,read-only,,mandatory,,The total number of events in which packets were dropped by the probe due to lack of resources. Note that this number is not necessarily the number of packets dropped; it is just the number of times this condition has been detected. This value is the same as the corresponding tokenRingMLStatsDropEvents
.1.3.6.1.2.1.16.1.3.1.4,TOKEN-RING-RMON-MIB::tokenRingPStatsDataOctets,Counter32,read-only,,mandatory,,The total number of octets of data in good frames received on the network (excluding framing bits but including FCS octets) in non-MAC packets.
.1.3.6.1.2.1.16.1.3.1.5,TOKEN-RING-RMON-MIB::tokenRingPStatsDataPkts,Counter32,read-only,,mandatory,,The total number of non-MAC packets in good frames. received.
.1.3.6.1.2.1.16.1.3.1.6,TOKEN-RING-RMON-MIB::tokenRingPStatsDataBroadcastPkts,Counter32,read-only,,mandatory,,The total number of good non-MAC frames received that were directed to an LLC broadcast address (0xFFFFFFFFFFFF or 0xC000FFFFFFFF).
.1.3.6.1.2.1.16.1.3.1.7,TOKEN-RING-RMON-MIB::tokenRingPStatsDataMulticastPkts,Counter32,read-only,,mandatory,,The total number of good non-MAC frames received that were directed to a local or global multicast or functional address. Note that this number does not include packets directed to the broadcast address.
.1.3.6.1.2.1.16.1.3.1.8,TOKEN-RING-RMON-MIB::tokenRingPStatsDataPkts18to63Octets,Counter32,read-only,,mandatory,,The total number of good non-MAC frames received that were between 18 and 63 octets in length inclusive, excluding framing bits but including FCS octets.
.1.3.6.1.2.1.16.1.3.1.9,TOKEN-RING-RMON-MIB::tokenRingPStatsDataPkts64to127Octets,Counter32,read-only,,mandatory,,The total number of good non-MAC frames received that were between 64 and 127 octets in length inclusive, excluding framing bits but including FCS octets.
.1.3.6.1.2.1.16.1.3.1.10,TOKEN-RING-RMON-MIB::tokenRingPStatsDataPkts128to255Octets,Counter32,read-only,,mandatory,,The total number of good non-MAC frames received that were between 128 and 255 octets in length inclusive, excluding framing bits but including FCS octets.
.1.3.6.1.2.1.16.1.3.1.11,TOKEN-RING-RMON-MIB::tokenRingPStatsDataPkts256to511Octets,Counter32,read-only,,mandatory,,The total number of good non-MAC frames received that were between 256 and 511 octets in length inclusive, excluding framing bits but including FCS octets.
.1.3.6.1.2.1.16.1.3.1.12,TOKEN-RING-RMON-MIB::tokenRingPStatsDataPkts512to1023Octets,Counter32,read-only,,mandatory,,The total number of good non-MAC frames received that were between 512 and 1023 octets in length inclusive, excluding framing bits but including FCS octets.
.1.3.6.1.2.1.16.1.3.1.13,TOKEN-RING-RMON-MIB::tokenRingPStatsDataPkts1024to2047Octets,Counter32,read-only,,mandatory,,The total number of good non-MAC frames received that were between 1024 and 2047 octets in length inclusive, excluding framing bits but including FCS octets.
.1.3.6.1.2.1.16.1.3.1.14,TOKEN-RING-RMON-MIB::tokenRingPStatsDataPkts2048to4095Octets,Counter32,read-only,,mandatory,,The total number of good non-MAC frames received that were between 2048 and 4095 octets in length inclusive, excluding framing bits but including FCS octets.
.1.3.6.1.2.1.16.1.3.1.15,TOKEN-RING-RMON-MIB::tokenRingPStatsDataPkts4096to8191Octets,Counter32,read-only,,mandatory,,The total number of good non-MAC frames received that were between 4096 and 8191 octets in length inclusive, excluding framing bits but including FCS octets.
.1.3.6.1.2.1.16.1.3.1.16,TOKEN-RING-RMON-MIB::tokenRingPStatsDataPkts8192to18000Octets,Counter32,read-only,,mandatory,,The total number of good non-MAC frames received that were between 8192 and 18000 octets in length inclusive, excluding framing bits but including FCS octets.
.1.3.6.1.2.1.16.1.3.1.17,TOKEN-RING-RMON-MIB::tokenRingPStatsDataPktsGreaterThan18000Octets,Counter32,read-only,,mandatory,,The total number of good non-MAC frames received that were greater than 18000 octets in length, excluding framing bits but including FCS octets.
.1.3.6.1.2.1.16.1.3.1.18,TOKEN-RING-RMON-MIB::tokenRingPStatsOwner,OCTET,read-write,,mandatory,,The entity that configured this entry and is therefore using the resources assigned to it.
.1.3.6.1.2.1.16.1.3.1.19,TOKEN-RING-RMON-MIB::tokenRingPStatsStatus,INTEGER,read-write,,mandatory,valid(1):createRequest(2):underCreation(3):invalid(4),The status of this tokenRingPStats entry.
.1.3.6.1.2.1.16.1.4,RMON2-MIB::etherStats2Table,,not-accessible,,current,,Contains the RMON-2 augmentations to RMON-1.
.1.3.6.1.2.1.16.1.4.1,RMON2-MIB::etherStats2Entry,,not-accessible,,current,,Contains the RMON-2 augmentations to RMON-1.
.1.3.6.1.2.1.16.1.4.1.1,RMON2-MIB::etherStatsDroppedFrames,Counter32,read-only,,current,,The total number of frames that were received by the probe and therefore not accounted for in the *StatsDropEvents, but that the probe chose not to count for this entry for whatever reason. Most often, this event occurs when the probe is out of some resources and decides to shed load from this collection. This count does not include packets that were not counted because they had MAC-layer errors. Note that, unlike the dropEvents counter, this number is the exact number of frames dropped.
.1.3.6.1.2.1.16.1.4.1.2,RMON2-MIB::etherStatsCreateTime,TimeTicks,read-only,,current,,The value of sysUpTime when this control entry was last activated. This can be used by the management station to ensure that the table has not been deleted and recreated between polls.
.1.3.6.1.2.1.16.1.5,RMON2-MIB::tokenRingMLStats2Table,,not-accessible,,deprecated,,Contains the RMON-2 augmentations to RMON-1. This table has been deprecated, as it has not had enough independent implementations to demonstrate interoperability to meet the requirements of a Draft Standard.
.1.3.6.1.2.1.16.1.5.1,RMON2-MIB::tokenRingMLStats2Entry,,not-accessible,,deprecated,,Contains the RMON-2 augmentations to RMON-1.
.1.3.6.1.2.1.16.1.5.1.1,RMON2-MIB::tokenRingMLStatsDroppedFrames,Counter32,read-only,,deprecated,,The total number of frames that were received by the probe and therefore not accounted for in the *StatsDropEvents, but that the probe chose not to count for this entry for whatever reason. Most often, this event occurs when the probe is out of some resources and decides to shed load from this collection. This count does not include packets that were not counted because they had MAC-layer errors. Note that, unlike the dropEvents counter, this number is the exact number of frames dropped.
.1.3.6.1.2.1.16.1.5.1.2,RMON2-MIB::tokenRingMLStatsCreateTime,TimeTicks,read-only,,deprecated,,The value of sysUpTime when this control entry was last activated. This can be used by the management station to ensure that the table has not been deleted and recreated between polls.
.1.3.6.1.2.1.16.1.6,RMON2-MIB::tokenRingPStats2Table,,not-accessible,,deprecated,,Contains the RMON-2 augmentations to RMON-1. This table has been deprecated, as it has not had enough independent implementations to demonstrate interoperability to meet the requirements of a Draft Standard.
.1.3.6.1.2.1.16.1.6.1,RMON2-MIB::tokenRingPStats2Entry,,not-accessible,,deprecated,,Contains the RMON-2 augmentations to RMON-1.
.1.3.6.1.2.1.16.1.6.1.1,RMON2-MIB::tokenRingPStatsDroppedFrames,Counter32,read-only,,deprecated,,The total number of frames that were received by the probe and therefore not accounted for in the *StatsDropEvents, but that the probe chose not to count for this entry for whatever reason. Most often, this event occurs when the probe is out of some resources and decides to shed load from this collection. This count does not include packets that were not counted because they had MAC-layer errors. Note that, unlike the dropEvents counter, this number is the exact number of frames dropped.
.1.3.6.1.2.1.16.1.6.1.2,RMON2-MIB::tokenRingPStatsCreateTime,TimeTicks,read-only,,deprecated,,The value of sysUpTime when this control entry was last activated. This can be used by the management station to ensure that the table has not been deleted and recreated between polls.
.1.3.6.1.2.1.16.2,RMON-MIB::history,,,,,,
.1.3.6.1.2.1.16.2.1,RMON-MIB::historyControlTable,,not-accessible,,current,,A list of history control entries.
.1.3.6.1.2.1.16.2.1.1,RMON-MIB::historyControlEntry,,not-accessible,historyControlIndex,current,,A list of parameters that set up a periodic sampling of statistics. As an example, an instance of the historyControlInterval object might be named historyControlInterval.2
.1.3.6.1.2.1.16.2.1.1.1,RMON-MIB::historyControlIndex,Integer32,read-only,,current,,An index that uniquely identifies an entry in the historyControl table. Each such entry defines a set of samples at a particular interval for an interface on the device.
.1.3.6.1.2.1.16.2.1.1.2,RMON-MIB::historyControlDataSource,OBJECT,read-create,,current,,This object identifies the source of the data for which historical data was collected and placed in a media-specific table on behalf of this historyControlEntry. This source can be any interface on this device. In order to identify a particular interface, this object shall identify the instance of the ifIndex object, defined in RFC 2233 [17], for the desired interface. For example, if an entry were to receive data from interface #1, this object would be set to ifIndex.1. The statistics in this group reflect all packets on the local network segment attached to the identified interface. An agent may or may not be able to tell if fundamental changes to the media of the interface have occurred and necessitate an invalidation of this entry. For example, a hot-pluggable ethernet card could be pulled out and replaced by a token-ring card. In such a case, if the agent has such knowledge of the change, it is recommended that it invalidate this entry. This object may not be modified if the associated historyControlStatus object is equal to valid(1).
.1.3.6.1.2.1.16.2.1.1.3,RMON-MIB::historyControlBucketsRequested,Integer32,read-create,,current,,The requested number of discrete time intervals over which data is to be saved in the part of the media-specific table associated with this historyControlEntry. When this object is created or modified, the probe should set historyControlBucketsGranted as closely to this object as is possible for the particular probe implementation and available resources.
.1.3.6.1.2.1.16.2.1.1.4,RMON-MIB::historyControlBucketsGranted,Integer32,read-only,,current,,The number of discrete sampling intervals over which data shall be saved in the part of the media-specific table associated with this historyControlEntry. When the associated historyControlBucketsRequested object is created or modified, the probe should set this object as closely to the requested value as is possible for the particular probe implementation and available resources. The probe must not lower this value except as a result of a modification to the associated historyControlBucketsRequested object. There will be times when the actual number of buckets associated with this entry is less than the value of this object. In this case, at the end of each sampling interval, a new bucket will be added to the media-specific table. When the number of buckets reaches the value of this object and a new bucket is to be added to the media-specific table, the oldest bucket associated with this historyControlEntry shall be deleted by the agent so that the new bucket can be added. When the value of this object changes to a value less than the current value, entries are deleted from the media-specific table associated with this historyControlEntry. Enough of the oldest of these entries shall be deleted by the agent so that their number remains less than or equal to the new value of this object. When the value of this object changes to a value greater than the current value, the number of associated media- specific entries may be allowed to grow.
.1.3.6.1.2.1.16.2.1.1.5,RMON-MIB::historyControlInterval,Integer32,read-create,,current,,The interval in seconds over which the data is sampled for each bucket in the part of the media-specific table associated with this historyControlEntry. This interval can be set to any number of seconds between 1 and 3600 (1 hour). Because the counters in a bucket may overflow at their maximum value with no indication, a prudent manager will take into account the possibility of overflow in any of the associated counters. It is important to consider the minimum time in which any counter could overflow on a particular media type and set the historyControlInterval object to a value less than this interval. This is typically most important for the 'octets' counter in any media-specific table. For example, on an Ethernet network, the etherHistoryOctets counter could overflow in about one hour at the Ethernet's maximum utilization. This object may not be modified if the associated historyControlStatus object is equal to valid(1).
.1.3.6.1.2.1.16.2.1.1.6,RMON-MIB::historyControlOwner,OCTET,read-create,,current,,The entity that configured this entry and is therefore using the resources assigned to it.
.1.3.6.1.2.1.16.2.1.1.7,RMON-MIB::historyControlStatus,INTEGER,read-create,,current,valid(1):createRequest(2):underCreation(3):invalid(4),The status of this historyControl entry. Each instance of the media-specific table associated with this historyControlEntry will be deleted by the agent if this historyControlEntry is not equal to valid(1).
.1.3.6.1.2.1.16.2.2,RMON-MIB::etherHistoryTable,,not-accessible,,current,,A list of Ethernet history entries.
.1.3.6.1.2.1.16.2.2.1,RMON-MIB::etherHistoryEntry,,not-accessible,etherHistoryIndex:etherHistorySampleIndex,current,,An historical sample of Ethernet statistics on a particular Ethernet interface. This sample is associated with the historyControlEntry which set up the parameters for a regular collection of these samples. As an example, an instance of the etherHistoryPkts object might be named etherHistoryPkts.2.89
.1.3.6.1.2.1.16.2.2.1.1,RMON-MIB::etherHistoryIndex,Integer32,read-only,,current,,The history of which this entry is a part. The history identified by a particular value of this index is the same history as identified by the same value of historyControlIndex.
.1.3.6.1.2.1.16.2.2.1.2,RMON-MIB::etherHistorySampleIndex,Integer32,read-only,,current,,An index that uniquely identifies the particular sample this entry represents among all samples associated with the same historyControlEntry. This index starts at 1 and increases by one as each new sample is taken.
.1.3.6.1.2.1.16.2.2.1.3,RMON-MIB::etherHistoryIntervalStart,TimeTicks,read-only,,current,,The value of sysUpTime at the start of the interval over which this sample was measured. If the probe keeps track of the time of day, it should start the first sample of the history at a time such that when the next hour of the day begins, a sample is started at that instant. Note that following this rule may require the probe to delay collecting the first sample of the history, as each sample must be of the same interval. Also note that the sample which is currently being collected is not accessible in this table until the end of its interval.
.1.3.6.1.2.1.16.2.2.1.4,RMON-MIB::etherHistoryDropEvents,Counter32,read-only,,current,,The total number of events in which packets were dropped by the probe due to lack of resources during this sampling interval. Note that this number is not necessarily the number of packets dropped, it is just the number of times this condition has been detected.
.1.3.6.1.2.1.16.2.2.1.5,RMON-MIB::etherHistoryOctets,Counter32,read-only,,current,,The total number of octets of data (including those in bad packets) received on the network (excluding framing bits but including FCS octets).
.1.3.6.1.2.1.16.2.2.1.6,RMON-MIB::etherHistoryPkts,Counter32,read-only,,current,,The number of packets (including bad packets) received during this sampling interval.
.1.3.6.1.2.1.16.2.2.1.7,RMON-MIB::etherHistoryBroadcastPkts,Counter32,read-only,,current,,The number of good packets received during this sampling interval that were directed to the broadcast address.
.1.3.6.1.2.1.16.2.2.1.8,RMON-MIB::etherHistoryMulticastPkts,Counter32,read-only,,current,,The number of good packets received during this sampling interval that were directed to a multicast address. Note that this number does not include packets addressed to the broadcast address.
.1.3.6.1.2.1.16.2.2.1.9,RMON-MIB::etherHistoryCRCAlignErrors,Counter32,read-only,,current,,The number of packets received during this sampling interval that had a length (excluding framing bits but including FCS octets) between 64 and 1518 octets, inclusive, but had either a bad Frame Check Sequence (FCS) with an integral number of octets (FCS Error) or a bad FCS with a non-integral number of octets (Alignment Error).
.1.3.6.1.2.1.16.2.2.1.10,RMON-MIB::etherHistoryUndersizePkts,Counter32,read-only,,current,,The number of packets received during this sampling interval that were less than 64 octets long (excluding framing bits but including FCS octets) and were otherwise well formed.
.1.3.6.1.2.1.16.2.2.1.11,RMON-MIB::etherHistoryOversizePkts,Counter32,read-only,,current,,The number of packets received during this sampling interval that were longer than 1518 octets (excluding framing bits but including FCS octets) but were otherwise well formed.
.1.3.6.1.2.1.16.2.2.1.12,RMON-MIB::etherHistoryFragments,Counter32,read-only,,current,,The total number of packets received during this sampling interval that were less than 64 octets in length (excluding framing bits but including FCS octets) had either a bad Frame Check Sequence (FCS) with an integral number of octets (FCS Error) or a bad FCS with a non-integral number of octets (Alignment Error). Note that it is entirely normal for etherHistoryFragments to increment. This is because it counts both runts (which are normal occurrences due to collisions) and noise hits.
.1.3.6.1.2.1.16.2.2.1.13,RMON-MIB::etherHistoryJabbers,Counter32,read-only,,current,,The number of packets received during this sampling interval that were longer than 1518 octets (excluding framing bits but including FCS octets), and had either a bad Frame Check Sequence (FCS) with an integral number of octets (FCS Error) or a bad FCS with a non-integral number of octets (Alignment Error). Note that this definition of jabber is different than the definition in IEEE-802.3 section 8.2.1.5 (10BASE5) and section 10.3.1.4 (10BASE2). These documents define jabber as the condition where any packet exceeds 20 ms. The allowed range to detect jabber is between 20 ms and 150 ms.
.1.3.6.1.2.1.16.2.2.1.14,RMON-MIB::etherHistoryCollisions,Counter32,read-only,,current,,The best estimate of the total number of collisions on this Ethernet segment during this sampling interval. The value returned will depend on the location of the RMON probe. Section 8.2.1.3 (10BASE-5) and section 10.3.1.3 (10BASE-2) of IEEE standard 802.3 states that a station must detect a collision, in the receive mode, if three or more stations are transmitting simultaneously. A repeater port must detect a collision when two or more stations are transmitting simultaneously. Thus a probe placed on a repeater port could record more collisions than a probe connected to a station on the same segment would. Probe location plays a much smaller role when considering 10BASE-T. 14.2.1.4 (10BASE-T) of IEEE standard 802.3 defines a collision as the simultaneous presence of signals on the DO and RD circuits (transmitting and receiving at the same time). A 10BASE-T station can only detect collisions when it is transmitting. Thus probes placed on a station and a repeater, should report the same number of collisions. Note also that an RMON probe inside a repeater should ideally report collisions between the repeater and one or more other hosts (transmit collisions as defined by IEEE 802.3k) plus receiver collisions observed on any coax segments to which the repeater is connected.
.1.3.6.1.2.1.16.2.2.1.15,RMON-MIB::etherHistoryUtilization,Integer32,read-only,,current,,The best estimate of the mean physical layer network utilization on this interface during this sampling interval, in hundredths of a percent.
.1.3.6.1.2.1.16.2.3,TOKEN-RING-RMON-MIB::tokenRingMLHistoryTable,,not-accessible,,mandatory,,A list of Mac-Layer Token Ring statistics entries.
.1.3.6.1.2.1.16.2.3.1,TOKEN-RING-RMON-MIB::tokenRingMLHistoryEntry,,not-accessible,tokenRingMLHistoryIndex:tokenRingMLHistorySampleIndex,mandatory,,A collection of Mac-Layer statistics kept for a particular Token Ring interface.
.1.3.6.1.2.1.16.2.3.1.1,TOKEN-RING-RMON-MIB::tokenRingMLHistoryIndex,INTEGER,read-only,,mandatory,,The history of which this entry is a part. The history identified by a particular value of this index is the same history as identified by the same value of historyControlIndex.
.1.3.6.1.2.1.16.2.3.1.2,TOKEN-RING-RMON-MIB::tokenRingMLHistorySampleIndex,INTEGER,read-only,,mandatory,,An index that uniquely identifies the particular Mac-Layer sample this entry represents among all Mac-Layer samples associated with the same historyControlEntry. This index starts at 1 and increases by one as each new sample is taken.
.1.3.6.1.2.1.16.2.3.1.3,TOKEN-RING-RMON-MIB::tokenRingMLHistoryIntervalStart,TimeTicks,read-only,,mandatory,,The value of sysUpTime at the start of the interval over which this sample was measured. If the probe keeps track of the time of day, it should start the first sample of the history at a time such that when the next hour of the day begins, a sample is started at that instant. Note that following this rule may require the probe to delay collecting the first sample of the history, as each sample must be of the same interval. Also note that the sample which is currently being collected is not accessible in this table until the end of its interval.
.1.3.6.1.2.1.16.2.3.1.4,TOKEN-RING-RMON-MIB::tokenRingMLHistoryDropEvents,Counter32,read-only,,mandatory,,The total number of events in which packets were dropped by the probe due to lack of resources during this sampling interval. Note that this number is not necessarily the number of packets dropped, it is just the number of times this condition has been detected.
.1.3.6.1.2.1.16.2.3.1.5,TOKEN-RING-RMON-MIB::tokenRingMLHistoryMacOctets,Counter32,read-only,,mandatory,,The total number of octets of data in MAC packets (excluding those that were not good frames) received on the network during this sampling interval (excluding framing bits but including FCS octets).
.1.3.6.1.2.1.16.2.3.1.6,TOKEN-RING-RMON-MIB::tokenRingMLHistoryMacPkts,Counter32,read-only,,mandatory,,The total number of MAC packets (excluding those that were not good frames) received during this sampling interval.
.1.3.6.1.2.1.16.2.3.1.7,TOKEN-RING-RMON-MIB::tokenRingMLHistoryRingPurgeEvents,Counter32,read-only,,mandatory,,The total number of times that the ring entered the ring purge state from normal ring state during this sampling interval. The ring purge state that comes from the claim token or beacon state is not counted.
.1.3.6.1.2.1.16.2.3.1.8,TOKEN-RING-RMON-MIB::tokenRingMLHistoryRingPurgePkts,Counter32,read-only,,mandatory,,The total number of Ring Purge MAC packets detected by the probe during this sampling interval.
.1.3.6.1.2.1.16.2.3.1.9,TOKEN-RING-RMON-MIB::tokenRingMLHistoryBeaconEvents,Counter32,read-only,,mandatory,,The total number of times that the ring enters a beaconing state (beaconFrameStreamingState, beaconBitStreamingState, beaconSetRecoveryModeState, or beaconRingSignalLossState) during this sampling interval. Note that a change of the source address of the beacon packet does not constitute a new beacon event.
.1.3.6.1.2.1.16.2.3.1.10,TOKEN-RING-RMON-MIB::tokenRingMLHistoryBeaconTime,INTEGER,read-only,,mandatory,,The amount of time that the ring has been in the beaconing state during this sampling interval.
.1.3.6.1.2.1.16.2.3.1.11,TOKEN-RING-RMON-MIB::tokenRingMLHistoryBeaconPkts,Counter32,read-only,,mandatory,,The total number of beacon MAC packets detected by the probe during this sampling interval.
.1.3.6.1.2.1.16.2.3.1.12,TOKEN-RING-RMON-MIB::tokenRingMLHistoryClaimTokenEvents,Counter32,read-only,,mandatory,,The total number of times that the ring enters the claim token state from normal ring state or ring purge state during this sampling interval. The claim token state that comes from the beacon state is not counted.
.1.3.6.1.2.1.16.2.3.1.13,TOKEN-RING-RMON-MIB::tokenRingMLHistoryClaimTokenPkts,Counter32,read-only,,mandatory,,The total number of claim token MAC packets detected by the probe during this sampling interval.
.1.3.6.1.2.1.16.2.3.1.14,TOKEN-RING-RMON-MIB::tokenRingMLHistoryNAUNChanges,Counter32,read-only,,mandatory,,The total number of NAUN changes detected by the probe during this sampling interval.
.1.3.6.1.2.1.16.2.3.1.15,TOKEN-RING-RMON-MIB::tokenRingMLHistoryLineErrors,Counter32,read-only,,mandatory,,The total number of line errors reported in error reporting packets detected by the probe during this sampling interval.
.1.3.6.1.2.1.16.2.3.1.16,TOKEN-RING-RMON-MIB::tokenRingMLHistoryInternalErrors,Counter32,read-only,,mandatory,,The total number of adapter internal errors reported in error reporting packets detected by the probe during this sampling interval.
.1.3.6.1.2.1.16.2.3.1.17,TOKEN-RING-RMON-MIB::tokenRingMLHistoryBurstErrors,Counter32,read-only,,mandatory,,The total number of burst errors reported in error reporting packets detected by the probe during this sampling interval.
.1.3.6.1.2.1.16.2.3.1.18,TOKEN-RING-RMON-MIB::tokenRingMLHistoryACErrors,Counter32,read-only,,mandatory,,The total number of AC (Address Copied) errors reported in error reporting packets detected by the probe during this sampling interval.
.1.3.6.1.2.1.16.2.3.1.19,TOKEN-RING-RMON-MIB::tokenRingMLHistoryAbortErrors,Counter32,read-only,,mandatory,,The total number of abort delimiters reported in error reporting packets detected by the probe during this sampling interval.
.1.3.6.1.2.1.16.2.3.1.20,TOKEN-RING-RMON-MIB::tokenRingMLHistoryLostFrameErrors,Counter32,read-only,,mandatory,,The total number of lost frame errors reported in error reporting packets detected by the probe during this sampling interval.
.1.3.6.1.2.1.16.2.3.1.21,TOKEN-RING-RMON-MIB::tokenRingMLHistoryCongestionErrors,Counter32,read-only,,mandatory,,The total number of receive congestion errors reported in error reporting packets detected by the probe during this sampling interval.
.1.3.6.1.2.1.16.2.3.1.22,TOKEN-RING-RMON-MIB::tokenRingMLHistoryFrameCopiedErrors,Counter32,read-only,,mandatory,,The total number of frame copied errors reported in error reporting packets detected by the probe during this sampling interval.
.1.3.6.1.2.1.16.2.3.1.23,TOKEN-RING-RMON-MIB::tokenRingMLHistoryFrequencyErrors,Counter32,read-only,,mandatory,,The total number of frequency errors reported in error reporting packets detected by the probe during this sampling interval.
.1.3.6.1.2.1.16.2.3.1.24,TOKEN-RING-RMON-MIB::tokenRingMLHistoryTokenErrors,Counter32,read-only,,mandatory,,The total number of token errors reported in error reporting packets detected by the probe during this sampling interval.
.1.3.6.1.2.1.16.2.3.1.25,TOKEN-RING-RMON-MIB::tokenRingMLHistorySoftErrorReports,Counter32,read-only,,mandatory,,The total number of soft error report frames detected by the probe during this sampling interval.
.1.3.6.1.2.1.16.2.3.1.26,TOKEN-RING-RMON-MIB::tokenRingMLHistoryRingPollEvents,Counter32,read-only,,mandatory,,The total number of ring poll events detected by the probe during this sampling interval.
.1.3.6.1.2.1.16.2.3.1.27,TOKEN-RING-RMON-MIB::tokenRingMLHistoryActiveStations,INTEGER,read-only,,mandatory,,The maximum number of active stations on the ring detected by the probe during this sampling interval.
.1.3.6.1.2.1.16.2.4,TOKEN-RING-RMON-MIB::tokenRingPHistoryTable,,not-accessible,,mandatory,,A list of promiscuous Token Ring statistics entries.
.1.3.6.1.2.1.16.2.4.1,TOKEN-RING-RMON-MIB::tokenRingPHistoryEntry,,not-accessible,tokenRingPHistoryIndex:tokenRingPHistorySampleIndex,mandatory,,A collection of promiscuous statistics kept for a particular Token Ring interface.
.1.3.6.1.2.1.16.2.4.1.1,TOKEN-RING-RMON-MIB::tokenRingPHistoryIndex,INTEGER,read-only,,mandatory,,The history of which this entry is a part. The history identified by a particular value of this index is the same history as identified by the same value of historyControlIndex.
.1.3.6.1.2.1.16.2.4.1.2,TOKEN-RING-RMON-MIB::tokenRingPHistorySampleIndex,INTEGER,read-only,,mandatory,,An index that uniquely identifies the particular sample this entry represents among all samples associated with the same historyControlEntry. This index starts at 1 and increases by one as each new sample is taken.
.1.3.6.1.2.1.16.2.4.1.3,TOKEN-RING-RMON-MIB::tokenRingPHistoryIntervalStart,TimeTicks,read-only,,mandatory,,The value of sysUpTime at the start of the interval over which this sample was measured. If the probe keeps track of the time of day, it should start the first sample of the history at a time such that when the next hour of the day begins, a sample is started at that instant. Note that following this rule may require the probe to delay collecting the first sample of the history, as each sample must be of the same interval. Also note that the sample which is currently being collected is not accessible in this table until the end of its interval.
.1.3.6.1.2.1.16.2.4.1.4,TOKEN-RING-RMON-MIB::tokenRingPHistoryDropEvents,Counter32,read-only,,mandatory,,The total number of events in which packets were dropped by the probe due to lack of resources during this sampling interval. Note that this number is not necessarily the number of packets dropped, it is just the number of times this condition has been detected.
.1.3.6.1.2.1.16.2.4.1.5,TOKEN-RING-RMON-MIB::tokenRingPHistoryDataOctets,Counter32,read-only,,mandatory,,The total number of octets of data in good frames received on the network (excluding framing bits but including FCS octets) in non-MAC packets during this sampling interval.
.1.3.6.1.2.1.16.2.4.1.6,TOKEN-RING-RMON-MIB::tokenRingPHistoryDataPkts,Counter32,read-only,,mandatory,,The total number of good non-MAC frames received during this sampling interval.
.1.3.6.1.2.1.16.2.4.1.7,TOKEN-RING-RMON-MIB::tokenRingPHistoryDataBroadcastPkts,Counter32,read-only,,mandatory,,The total number of good non-MAC frames received during this sampling interval that were directed to an LLC broadcast address (0xFFFFFFFFFFFF or 0xC000FFFFFFFF).
.1.3.6.1.2.1.16.2.4.1.8,TOKEN-RING-RMON-MIB::tokenRingPHistoryDataMulticastPkts,Counter32,read-only,,mandatory,,The total number of good non-MAC frames received during this sampling interval that were directed to a local or global multicast or functional address. Note that this number does not include packets directed to the broadcast address.
.1.3.6.1.2.1.16.2.4.1.9,TOKEN-RING-RMON-MIB::tokenRingPHistoryDataPkts18to63Octets,Counter32,read-only,,mandatory,,The total number of good non-MAC frames received during this sampling interval that were between 18 and 63 octets in length inclusive, excluding framing bits but including FCS octets.
.1.3.6.1.2.1.16.2.4.1.10,TOKEN-RING-RMON-MIB::tokenRingPHistoryDataPkts64to127Octets,Counter32,read-only,,mandatory,,The total number of good non-MAC frames received during this sampling interval that were between 64 and 127 octets in length inclusive, excluding framing bits but including FCS octets.
.1.3.6.1.2.1.16.2.4.1.11,TOKEN-RING-RMON-MIB::tokenRingPHistoryDataPkts128to255Octets,Counter32,read-only,,mandatory,,The total number of good non-MAC frames received during this sampling interval that were between 128 and 255 octets in length inclusive, excluding framing bits but including FCS octets.
.1.3.6.1.2.1.16.2.4.1.12,TOKEN-RING-RMON-MIB::tokenRingPHistoryDataPkts256to511Octets,Counter32,read-only,,mandatory,,The total number of good non-MAC frames received during this sampling interval that were between 256 and 511 octets in length inclusive, excluding framing bits but including FCS octets.
.1.3.6.1.2.1.16.2.4.1.13,TOKEN-RING-RMON-MIB::tokenRingPHistoryDataPkts512to1023Octets,Counter32,read-only,,mandatory,,The total number of good non-MAC frames received during this sampling interval that were between 512 and 1023 octets in length inclusive, excluding framing bits but including FCS octets.
.1.3.6.1.2.1.16.2.4.1.14,TOKEN-RING-RMON-MIB::tokenRingPHistoryDataPkts1024to2047Octets,Counter32,read-only,,mandatory,,The total number of good non-MAC frames received during this sampling interval that were between 1024 and 2047 octets in length inclusive, excluding framing bits but including FCS octets.
.1.3.6.1.2.1.16.2.4.1.15,TOKEN-RING-RMON-MIB::tokenRingPHistoryDataPkts2048to4095Octets,Counter32,read-only,,mandatory,,The total number of good non-MAC frames received during this sampling interval that were between 2048 and 4095 octets in length inclusive, excluding framing bits but including FCS octets.
.1.3.6.1.2.1.16.2.4.1.16,TOKEN-RING-RMON-MIB::tokenRingPHistoryDataPkts4096to8191Octets,Counter32,read-only,,mandatory,,The total number of good non-MAC frames received during this sampling interval that were between 4096 and 8191 octets in length inclusive, excluding framing bits but including FCS octets.
.1.3.6.1.2.1.16.2.4.1.17,TOKEN-RING-RMON-MIB::tokenRingPHistoryDataPkts8192to18000Octets,Counter32,read-only,,mandatory,,The total number of good non-MAC frames received during this sampling interval that were between 8192 and 18000 octets in length inclusive, excluding framing bits but including FCS octets.
.1.3.6.1.2.1.16.2.4.1.18,TOKEN-RING-RMON-MIB::tokenRingPHistoryDataPktsGreaterThan18000Octets,Counter32,read-only,,mandatory,,The total number of good non-MAC frames received during this sampling interval that were greater than 18000 octets in length, excluding framing bits but including FCS octets.
.1.3.6.1.2.1.16.2.5,RMON2-MIB::historyControl2Table,,not-accessible,,current,,Contains the RMON-2 augmentations to RMON-1.
.1.3.6.1.2.1.16.2.5.1,RMON2-MIB::historyControl2Entry,,not-accessible,,current,,Contains the RMON-2 augmentations to RMON-1.
.1.3.6.1.2.1.16.2.5.1.1,RMON2-MIB::historyControlDroppedFrames,Counter32,read-only,,current,,The total number of frames that were received by the probe and therefore not accounted for in the *StatsDropEvents, but that the probe chose not to count for this entry for whatever reason. Most often, this event occurs when the probe is out of some resources and decides to shed load from this collection. This count does not include packets that were not counted because they had MAC-layer errors. Note that, unlike the dropEvents counter, this number is the exact number of frames dropped.
.1.3.6.1.2.1.16.3,RMON-MIB::alarm,,,,,,
.1.3.6.1.2.1.16.3.1,RMON-MIB::alarmTable,,not-accessible,,current,,A list of alarm entries.
.1.3.6.1.2.1.16.3.1.1,RMON-MIB::alarmEntry,,not-accessible,alarmIndex,current,,A list of parameters that set up a periodic checking for alarm conditions. For example, an instance of the alarmValue object might be named alarmValue.8
.1.3.6.1.2.1.16.3.1.1.1,RMON-MIB::alarmIndex,Integer32,read-only,,current,,An index that uniquely identifies an entry in the alarm table. Each such entry defines a diagnostic sample at a particular interval for an object on the device.
.1.3.6.1.2.1.16.3.1.1.2,RMON-MIB::alarmInterval,Integer32,read-create,,current,,The interval in seconds over which the data is sampled and compared with the rising and falling thresholds. When setting this variable, care should be taken in the case of deltaValue sampling - the interval should be set short enough that the sampled variable is very unlikely to increase or decrease by more than 2^31 - 1 during a single sampling interval. This object may not be modified if the associated alarmStatus object is equal to valid(1).
.1.3.6.1.2.1.16.3.1.1.3,RMON-MIB::alarmVariable,OBJECT,read-create,,current,,The object identifier of the particular variable to be sampled. Only variables that resolve to an ASN.1 primitive type of INTEGER (INTEGER, Integer32, Counter32, Counter64, Gauge, or TimeTicks) may be sampled. Because SNMP access control is articulated entirely in terms of the contents of MIB views, no access control mechanism exists that can restrict the value of this object to identify only those objects that exist in a particular MIB view. Because there is thus no acceptable means of restricting the read access that could be obtained through the alarm mechanism, the probe must only grant write access to this object in those views that have read access to all objects on the probe. During a set operation, if the supplied variable name is not available in the selected MIB view, a badValue error must be returned. If at any time the variable name of an established alarmEntry is no longer available in the selected MIB view, the probe must change the status of this alarmEntry to invalid(4). This object may not be modified if the associated alarmStatus object is equal to valid(1).
.1.3.6.1.2.1.16.3.1.1.4,RMON-MIB::alarmSampleType,INTEGER,read-create,,current,absoluteValue(1):deltaValue(2),The method of sampling the selected variable and calculating the value to be compared against the thresholds. If the value of this object is absoluteValue(1), the value of the selected variable will be compared directly with the thresholds at the end of the sampling interval. If the value of this object is deltaValue(2), the value of the selected variable at the last sample will be subtracted from the current value, and the difference compared with the thresholds. This object may not be modified if the associated alarmStatus object is equal to valid(1).
.1.3.6.1.2.1.16.3.1.1.5,RMON-MIB::alarmValue,Integer32,read-only,,current,,The value of the statistic during the last sampling period. For example, if the sample type is deltaValue, this value will be the difference between the samples at the beginning and end of the period. If the sample type is absoluteValue, this value will be the sampled value at the end of the period. This is the value that is compared with the rising and falling thresholds. The value during the current sampling period is not made available until the period is completed and will remain available until the next period completes.
.1.3.6.1.2.1.16.3.1.1.6,RMON-MIB::alarmStartupAlarm,INTEGER,read-create,,current,risingAlarm(1):fallingAlarm(2):risingOrFallingAlarm(3),The alarm that may be sent when this entry is first set to valid. If the first sample after this entry becomes valid is greater than or equal to the risingThreshold and alarmStartupAlarm is equal to risingAlarm(1) or risingOrFallingAlarm(3), then a single rising alarm will be generated. If the first sample after this entry becomes valid is less than or equal to the fallingThreshold and alarmStartupAlarm is equal to fallingAlarm(2) or risingOrFallingAlarm(3), then a single falling alarm will be generated. This object may not be modified if the associated alarmStatus object is equal to valid(1).
.1.3.6.1.2.1.16.3.1.1.7,RMON-MIB::alarmRisingThreshold,Integer32,read-create,,current,,A threshold for the sampled statistic. When the current sampled value is greater than or equal to this threshold, and the value at the last sampling interval was less than this threshold, a single event will be generated. A single event will also be generated if the first sample after this entry becomes valid is greater than or equal to this threshold and the associated alarmStartupAlarm is equal to risingAlarm(1) or risingOrFallingAlarm(3). After a rising event is generated, another such event will not be generated until the sampled value falls below this threshold and reaches the alarmFallingThreshold. This object may not be modified if the associated alarmStatus object is equal to valid(1).
.1.3.6.1.2.1.16.3.1.1.8,RMON-MIB::alarmFallingThreshold,Integer32,read-create,,current,,A threshold for the sampled statistic. When the current sampled value is less than or equal to this threshold, and the value at the last sampling interval was greater than this threshold, a single event will be generated. A single event will also be generated if the first sample after this entry becomes valid is less than or equal to this threshold and the associated alarmStartupAlarm is equal to fallingAlarm(2) or risingOrFallingAlarm(3). After a falling event is generated, another such event will not be generated until the sampled value rises above this threshold and reaches the alarmRisingThreshold. This object may not be modified if the associated alarmStatus object is equal to valid(1).
.1.3.6.1.2.1.16.3.1.1.9,RMON-MIB::alarmRisingEventIndex,Integer32,read-create,,current,,The index of the eventEntry that is used when a rising threshold is crossed. The eventEntry identified by a particular value of this index is the same as identified by the same value of the eventIndex object. If there is no corresponding entry in the eventTable, then no association exists. In particular, if this value is zero, no associated event will be generated, as zero is not a valid event index. This object may not be modified if the associated alarmStatus object is equal to valid(1).
.1.3.6.1.2.1.16.3.1.1.10,RMON-MIB::alarmFallingEventIndex,Integer32,read-create,,current,,The index of the eventEntry that is used when a falling threshold is crossed. The eventEntry identified by a particular value of this index is the same as identified by the same value of the eventIndex object. If there is no corresponding entry in the eventTable, then no association exists. In particular, if this value is zero, no associated event will be generated, as zero is not a valid event index. This object may not be modified if the associated alarmStatus object is equal to valid(1).
.1.3.6.1.2.1.16.3.1.1.11,RMON-MIB::alarmOwner,OCTET,read-create,,current,,The entity that configured this entry and is therefore using the resources assigned to it.
.1.3.6.1.2.1.16.3.1.1.12,RMON-MIB::alarmStatus,INTEGER,read-create,,current,valid(1):createRequest(2):underCreation(3):invalid(4),The status of this alarm entry.
.1.3.6.1.2.1.16.4,RMON-MIB::hosts,,,,,,
.1.3.6.1.2.1.16.4.1,RMON-MIB::hostControlTable,,not-accessible,,current,,A list of host table control entries.
.1.3.6.1.2.1.16.4.1.1,RMON-MIB::hostControlEntry,,not-accessible,hostControlIndex,current,,A list of parameters that set up the discovery of hosts on a particular interface and the collection of statistics about these hosts. For example, an instance of the hostControlTableSize object might be named hostControlTableSize.1
.1.3.6.1.2.1.16.4.1.1.1,RMON-MIB::hostControlIndex,Integer32,read-only,,current,,An index that uniquely identifies an entry in the hostControl table. Each such entry defines a function that discovers hosts on a particular interface and places statistics about them in the hostTable and the hostTimeTable on behalf of this hostControlEntry.
.1.3.6.1.2.1.16.4.1.1.2,RMON-MIB::hostControlDataSource,OBJECT,read-create,,current,,This object identifies the source of the data for this instance of the host function. This source can be any interface on this device. In order to identify a particular interface, this object shall identify the instance of the ifIndex object, defined in RFC 2233 [17], for the desired interface. For example, if an entry were to receive data from interface #1, this object would be set to ifIndex.1. The statistics in this group reflect all packets on the local network segment attached to the identified interface. An agent may or may not be able to tell if fundamental changes to the media of the interface have occurred and necessitate an invalidation of this entry. For example, a hot-pluggable ethernet card could be pulled out and replaced by a token-ring card. In such a case, if the agent has such knowledge of the change, it is recommended that it invalidate this entry. This object may not be modified if the associated hostControlStatus object is equal to valid(1).
.1.3.6.1.2.1.16.4.1.1.3,RMON-MIB::hostControlTableSize,Integer32,read-only,,current,,The number of hostEntries in the hostTable and the hostTimeTable associated with this hostControlEntry.
.1.3.6.1.2.1.16.4.1.1.4,RMON-MIB::hostControlLastDeleteTime,TimeTicks,read-only,,current,,The value of sysUpTime when the last entry was deleted from the portion of the hostTable associated with this hostControlEntry. If no deletions have occurred, this value shall be zero.
.1.3.6.1.2.1.16.4.1.1.5,RMON-MIB::hostControlOwner,OCTET,read-create,,current,,The entity that configured this entry and is therefore using the resources assigned to it.
.1.3.6.1.2.1.16.4.1.1.6,RMON-MIB::hostControlStatus,INTEGER,read-create,,current,valid(1):createRequest(2):underCreation(3):invalid(4),The status of this hostControl entry. If this object is not equal to valid(1), all associated entries in the hostTable, hostTimeTable, and the hostTopNTable shall be deleted by the agent.
.1.3.6.1.2.1.16.4.2,RMON-MIB::hostTable,,not-accessible,,current,,A list of host entries.
.1.3.6.1.2.1.16.4.2.1,RMON-MIB::hostEntry,,not-accessible,hostIndex:hostAddress,current,,A collection of statistics for a particular host that has been discovered on an interface of this device. For example, an instance of the hostOutBroadcastPkts object might be named hostOutBroadcastPkts.1.6.8.0.32.27.3.176
.1.3.6.1.2.1.16.4.2.1.1,RMON-MIB::hostAddress,OCTET,read-only,,current,,The physical address of this host.
.1.3.6.1.2.1.16.4.2.1.2,RMON-MIB::hostCreationOrder,Integer32,read-only,,current,,An index that defines the relative ordering of the creation time of hosts captured for a particular hostControlEntry. This index shall be between 1 and N, where N is the value of the associated hostControlTableSize. The ordering of the indexes is based on the order of each entry's insertion into the table, in which entries added earlier have a lower index value than entries added later. It is important to note that the order for a particular entry may change as an (earlier) entry is deleted from the table. Because this order may change, management stations should make use of the hostControlLastDeleteTime variable in the hostControlEntry associated with the relevant portion of the hostTable. By observing this variable, the management station may detect the circumstances where a previous association between a value of hostCreationOrder and a hostEntry may no longer hold.
.1.3.6.1.2.1.16.4.2.1.3,RMON-MIB::hostIndex,Integer32,read-only,,current,,The set of collected host statistics of which this entry is a part. The set of hosts identified by a particular value of this index is associated with the hostControlEntry as identified by the same value of hostControlIndex.
.1.3.6.1.2.1.16.4.2.1.4,RMON-MIB::hostInPkts,Counter32,read-only,,current,,The number of good packets transmitted to this address since it was added to the hostTable.
.1.3.6.1.2.1.16.4.2.1.5,RMON-MIB::hostOutPkts,Counter32,read-only,,current,,The number of packets, including bad packets, transmitted by this address since it was added to the hostTable.
.1.3.6.1.2.1.16.4.2.1.6,RMON-MIB::hostInOctets,Counter32,read-only,,current,,The number of octets transmitted to this address since it was added to the hostTable (excluding framing bits but including FCS octets), except for those octets in bad packets.
.1.3.6.1.2.1.16.4.2.1.7,RMON-MIB::hostOutOctets,Counter32,read-only,,current,,The number of octets transmitted by this address since it was added to the hostTable (excluding framing bits but including FCS octets), including those octets in bad packets.
.1.3.6.1.2.1.16.4.2.1.8,RMON-MIB::hostOutErrors,Counter32,read-only,,current,,The number of bad packets transmitted by this address since this host was added to the hostTable.
.1.3.6.1.2.1.16.4.2.1.9,RMON-MIB::hostOutBroadcastPkts,Counter32,read-only,,current,,The number of good packets transmitted by this address that were directed to the broadcast address since this host was added to the hostTable.
.1.3.6.1.2.1.16.4.2.1.10,RMON-MIB::hostOutMulticastPkts,Counter32,read-only,,current,,The number of good packets transmitted by this address that were directed to a multicast address since this host was added to the hostTable. Note that this number does not include packets directed to the broadcast address.
.1.3.6.1.2.1.16.4.3,RMON-MIB::hostTimeTable,,not-accessible,,current,,A list of time-ordered host table entries.
.1.3.6.1.2.1.16.4.3.1,RMON-MIB::hostTimeEntry,,not-accessible,hostTimeIndex:hostTimeCreationOrder,current,,A collection of statistics for a particular host that has been discovered on an interface of this device. This collection includes the relative ordering of the creation time of this object. For example, an instance of the hostTimeOutBroadcastPkts object might be named hostTimeOutBroadcastPkts.1.687
.1.3.6.1.2.1.16.4.3.1.1,RMON-MIB::hostTimeAddress,OCTET,read-only,,current,,The physical address of this host.
.1.3.6.1.2.1.16.4.3.1.2,RMON-MIB::hostTimeCreationOrder,Integer32,read-only,,current,,An index that uniquely identifies an entry in the hostTime table among those entries associated with the same hostControlEntry. This index shall be between 1 and N, where N is the value of the associated hostControlTableSize. The ordering of the indexes is based on the order of each entry's insertion into the table, in which entries added earlier have a lower index value than entries added later. Thus the management station has the ability to learn of new entries added to this table without downloading the entire table. It is important to note that the index for a particular entry may change as an (earlier) entry is deleted from the table. Because this order may change, management stations should make use of the hostControlLastDeleteTime variable in the hostControlEntry associated with the relevant portion of the hostTimeTable. By observing this variable, the management station may detect the circumstances where a download of the table may have missed entries, and where a previous association between a value of hostTimeCreationOrder and a hostTimeEntry may no longer hold.
.1.3.6.1.2.1.16.4.3.1.3,RMON-MIB::hostTimeIndex,Integer32,read-only,,current,,The set of collected host statistics of which this entry is a part. The set of hosts identified by a particular value of this index is associated with the hostControlEntry as identified by the same value of hostControlIndex.
.1.3.6.1.2.1.16.4.3.1.4,RMON-MIB::hostTimeInPkts,Counter32,read-only,,current,,The number of good packets transmitted to this address since it was added to the hostTimeTable.
.1.3.6.1.2.1.16.4.3.1.5,RMON-MIB::hostTimeOutPkts,Counter32,read-only,,current,,The number of packets, including bad packets, transmitted by this address since it was added to the hostTimeTable.
.1.3.6.1.2.1.16.4.3.1.6,RMON-MIB::hostTimeInOctets,Counter32,read-only,,current,,The number of octets transmitted to this address since it was added to the hostTimeTable (excluding framing bits but including FCS octets), except for those octets in bad packets.
.1.3.6.1.2.1.16.4.3.1.7,RMON-MIB::hostTimeOutOctets,Counter32,read-only,,current,,The number of octets transmitted by this address since it was added to the hostTimeTable (excluding framing bits but including FCS octets), including those octets in bad packets.
.1.3.6.1.2.1.16.4.3.1.8,RMON-MIB::hostTimeOutErrors,Counter32,read-only,,current,,The number of bad packets transmitted by this address since this host was added to the hostTimeTable.
.1.3.6.1.2.1.16.4.3.1.9,RMON-MIB::hostTimeOutBroadcastPkts,Counter32,read-only,,current,,The number of good packets transmitted by this address that were directed to the broadcast address since this host was added to the hostTimeTable.
.1.3.6.1.2.1.16.4.3.1.10,RMON-MIB::hostTimeOutMulticastPkts,Counter32,read-only,,current,,The number of good packets transmitted by this address that were directed to a multicast address since this host was added to the hostTimeTable. Note that this number does not include packets directed to the broadcast address.
.1.3.6.1.2.1.16.4.4,RMON2-MIB::hostControl2Table,,not-accessible,,current,,Contains the RMON-2 augmentations to RMON-1.
.1.3.6.1.2.1.16.4.4.1,RMON2-MIB::hostControl2Entry,,not-accessible,,current,,Contains the RMON-2 augmentations to RMON-1.
.1.3.6.1.2.1.16.4.4.1.1,RMON2-MIB::hostControlDroppedFrames,Counter32,read-only,,current,,The total number of frames that were received by the probe and therefore not accounted for in the *StatsDropEvents, but that the probe chose not to count for this entry for whatever reason. Most often, this event occurs when the probe is out of some resources and decides to shed load from this collection. This count does not include packets that were not counted because they had MAC-layer errors. Note that, unlike the dropEvents counter, this number is the exact number of frames dropped.
.1.3.6.1.2.1.16.4.4.1.2,RMON2-MIB::hostControlCreateTime,TimeTicks,read-only,,current,,The value of sysUpTime when this control entry was last activated. This can be used by the management station to ensure that the table has not been deleted and recreated between polls.
.1.3.6.1.2.1.16.5,RMON-MIB::hostTopN,,,,,,
.1.3.6.1.2.1.16.5.1,RMON-MIB::hostTopNControlTable,,not-accessible,,current,,A list of top N host control entries.
.1.3.6.1.2.1.16.5.1.1,RMON-MIB::hostTopNControlEntry,,not-accessible,hostTopNControlIndex,current,,A set of parameters that control the creation of a report of the top N hosts according to several metrics. For example, an instance of the hostTopNDuration object might be named hostTopNDuration.3
.1.3.6.1.2.1.16.5.1.1.1,RMON-MIB::hostTopNControlIndex,Integer32,read-only,,current,,An index that uniquely identifies an entry in the hostTopNControl table. Each such entry defines one top N report prepared for one interface.
.1.3.6.1.2.1.16.5.1.1.2,RMON-MIB::hostTopNHostIndex,Integer32,read-create,,current,,The host table for which a top N report will be prepared on behalf of this entry. The host table identified by a particular value of this index is associated with the same host table as identified by the same value of hostIndex. This object may not be modified if the associated hostTopNStatus object is equal to valid(1).
.1.3.6.1.2.1.16.5.1.1.3,RMON-MIB::hostTopNRateBase,INTEGER,read-create,,current,hostTopNInPkts(1):hostTopNOutPkts(2):hostTopNInOctets(3):hostTopNOutOctets(4):hostTopNOutErrors(5):hostTopNOutBroadcastPkts(6):hostTopNOutMulticastPkts(7),The variable for each host that the hostTopNRate variable is based upon. This object may not be modified if the associated hostTopNStatus object is equal to valid(1).
.1.3.6.1.2.1.16.5.1.1.4,RMON-MIB::hostTopNTimeRemaining,Integer32,read-create,,current,,The number of seconds left in the report currently being collected. When this object is modified by the management station, a new collection is started, possibly aborting a currently running report. The new value is used as the requested duration of this report, which is loaded into the associated hostTopNDuration object. When this object is set to a non-zero value, any associated hostTopNEntries shall be made inaccessible by the monitor. While the value of this object is non-zero, it decrements by one per second until it reaches zero. During this time, all associated hostTopNEntries shall remain inaccessible. At the time that this object decrements to zero, the report is made accessible in the hostTopNTable. Thus, the hostTopN table needs to be created only at the end of the collection interval.
.1.3.6.1.2.1.16.5.1.1.5,RMON-MIB::hostTopNDuration,Integer32,read-only,,current,,The number of seconds that this report has collected during the last sampling interval, or if this report is currently being collected, the number of seconds that this report is being collected during this sampling interval. When the associated hostTopNTimeRemaining object is set, this object shall be set by the probe to the same value and shall not be modified until the next time the hostTopNTimeRemaining is set. This value shall be zero if no reports have been requested for this hostTopNControlEntry.
.1.3.6.1.2.1.16.5.1.1.6,RMON-MIB::hostTopNRequestedSize,Integer32,read-create,,current,,The maximum number of hosts requested for the top N table. When this object is created or modified, the probe should set hostTopNGrantedSize as closely to this object as is possible for the particular probe implementation and available resources.
.1.3.6.1.2.1.16.5.1.1.7,RMON-MIB::hostTopNGrantedSize,Integer32,read-only,,current,,The maximum number of hosts in the top N table. When the associated hostTopNRequestedSize object is created or modified, the probe should set this object as closely to the requested value as is possible for the particular implementation and available resources. The probe must not lower this value except as a result of a set to the associated hostTopNRequestedSize object. Hosts with the highest value of hostTopNRate shall be placed in this table in decreasing order of this rate until there is no more room or until there are no more hosts.
.1.3.6.1.2.1.16.5.1.1.8,RMON-MIB::hostTopNStartTime,TimeTicks,read-only,,current,,The value of sysUpTime when this top N report was last started. In other words, this is the time that the associated hostTopNTimeRemaining object was modified to start the requested report.
.1.3.6.1.2.1.16.5.1.1.9,RMON-MIB::hostTopNOwner,OCTET,read-create,,current,,The entity that configured this entry and is therefore using the resources assigned to it.
.1.3.6.1.2.1.16.5.1.1.10,RMON-MIB::hostTopNStatus,INTEGER,read-create,,current,valid(1):createRequest(2):underCreation(3):invalid(4),The status of this hostTopNControl entry. If this object is not equal to valid(1), all associated hostTopNEntries shall be deleted by the agent.
.1.3.6.1.2.1.16.5.2,RMON-MIB::hostTopNTable,,not-accessible,,current,,A list of top N host entries.
.1.3.6.1.2.1.16.5.2.1,RMON-MIB::hostTopNEntry,,not-accessible,hostTopNReport:hostTopNIndex,current,,A set of statistics for a host that is part of a top N report. For example, an instance of the hostTopNRate object might be named hostTopNRate.3.10
.1.3.6.1.2.1.16.5.2.1.1,RMON-MIB::hostTopNReport,Integer32,read-only,,current,,This object identifies the top N report of which this entry is a part. The set of hosts identified by a particular value of this object is part of the same report as identified by the same value of the hostTopNControlIndex object.
.1.3.6.1.2.1.16.5.2.1.2,RMON-MIB::hostTopNIndex,Integer32,read-only,,current,,An index that uniquely identifies an entry in the hostTopN table among those in the same report. This index is between 1 and N, where N is the number of entries in this table. Increasing values of hostTopNIndex shall be assigned to entries with decreasing values of hostTopNRate until index N is assigned to the entry with the lowest value of hostTopNRate or there are no more hostTopNEntries.
.1.3.6.1.2.1.16.5.2.1.3,RMON-MIB::hostTopNAddress,OCTET,read-only,,current,,The physical address of this host.
.1.3.6.1.2.1.16.5.2.1.4,RMON-MIB::hostTopNRate,Integer32,read-only,,current,,The amount of change in the selected variable during this sampling interval. The selected variable is this host's instance of the object selected by hostTopNRateBase.
.1.3.6.1.2.1.16.6,RMON-MIB::matrix,,,,,,
.1.3.6.1.2.1.16.6.1,RMON-MIB::matrixControlTable,,not-accessible,,current,,A list of information entries for the traffic matrix on each interface.
.1.3.6.1.2.1.16.6.1.1,RMON-MIB::matrixControlEntry,,not-accessible,matrixControlIndex,current,,Information about a traffic matrix on a particular interface. For example, an instance of the matrixControlLastDeleteTime object might be named matrixControlLastDeleteTime.1
.1.3.6.1.2.1.16.6.1.1.1,RMON-MIB::matrixControlIndex,Integer32,read-only,,current,,An index that uniquely identifies an entry in the matrixControl table. Each such entry defines a function that discovers conversations on a particular interface and places statistics about them in the matrixSDTable and the matrixDSTable on behalf of this matrixControlEntry.
.1.3.6.1.2.1.16.6.1.1.2,RMON-MIB::matrixControlDataSource,OBJECT,read-create,,current,,This object identifies the source of the data from which this entry creates a traffic matrix. This source can be any interface on this device. In order to identify a particular interface, this object shall identify the instance of the ifIndex object, defined in RFC 2233 [17], for the desired interface. For example, if an entry were to receive data from interface #1, this object would be set to ifIndex.1. The statistics in this group reflect all packets on the local network segment attached to the identified interface. An agent may or may not be able to tell if fundamental changes to the media of the interface have occurred and necessitate an invalidation of this entry. For example, a hot-pluggable ethernet card could be pulled out and replaced by a token-ring card. In such a case, if the agent has such knowledge of the change, it is recommended that it invalidate this entry. This object may not be modified if the associated matrixControlStatus object is equal to valid(1).
.1.3.6.1.2.1.16.6.1.1.3,RMON-MIB::matrixControlTableSize,Integer32,read-only,,current,,The number of matrixSDEntries in the matrixSDTable for this interface. This must also be the value of the number of entries in the matrixDSTable for this interface.
.1.3.6.1.2.1.16.6.1.1.4,RMON-MIB::matrixControlLastDeleteTime,TimeTicks,read-only,,current,,The value of sysUpTime when the last entry was deleted from the portion of the matrixSDTable or matrixDSTable associated with this matrixControlEntry. If no deletions have occurred, this value shall be zero.
.1.3.6.1.2.1.16.6.1.1.5,RMON-MIB::matrixControlOwner,OCTET,read-create,,current,,The entity that configured this entry and is therefore using the resources assigned to it.
.1.3.6.1.2.1.16.6.1.1.6,RMON-MIB::matrixControlStatus,INTEGER,read-create,,current,valid(1):createRequest(2):underCreation(3):invalid(4),The status of this matrixControl entry. If this object is not equal to valid(1), all associated entries in the matrixSDTable and the matrixDSTable shall be deleted by the agent.
.1.3.6.1.2.1.16.6.2,RMON-MIB::matrixSDTable,,not-accessible,,current,,A list of traffic matrix entries indexed by source and destination MAC address.
.1.3.6.1.2.1.16.6.2.1,RMON-MIB::matrixSDEntry,,not-accessible,matrixSDIndex:matrixSDSourceAddress:matrixSDDestAddress,current,,A collection of statistics for communications between two addresses on a particular interface. For example, an instance of the matrixSDPkts object might be named matrixSDPkts.1.6.8.0.32.27.3.176.6.8.0.32.10.8.113
.1.3.6.1.2.1.16.6.2.1.1,RMON-MIB::matrixSDSourceAddress,OCTET,read-only,,current,,The source physical address.
.1.3.6.1.2.1.16.6.2.1.2,RMON-MIB::matrixSDDestAddress,OCTET,read-only,,current,,The destination physical address.
.1.3.6.1.2.1.16.6.2.1.3,RMON-MIB::matrixSDIndex,Integer32,read-only,,current,,The set of collected matrix statistics of which this entry is a part. The set of matrix statistics identified by a particular value of this index is associated with the same matrixControlEntry as identified by the same value of matrixControlIndex.
.1.3.6.1.2.1.16.6.2.1.4,RMON-MIB::matrixSDPkts,Counter32,read-only,,current,,The number of packets transmitted from the source address to the destination address (this number includes bad packets).
.1.3.6.1.2.1.16.6.2.1.5,RMON-MIB::matrixSDOctets,Counter32,read-only,,current,,The number of octets (excluding framing bits but including FCS octets) contained in all packets transmitted from the source address to the destination address.
.1.3.6.1.2.1.16.6.2.1.6,RMON-MIB::matrixSDErrors,Counter32,read-only,,current,,The number of bad packets transmitted from the source address to the destination address.
.1.3.6.1.2.1.16.6.3,RMON-MIB::matrixDSTable,,not-accessible,,current,,A list of traffic matrix entries indexed by destination and source MAC address.
.1.3.6.1.2.1.16.6.3.1,RMON-MIB::matrixDSEntry,,not-accessible,matrixDSIndex:matrixDSDestAddress:matrixDSSourceAddress,current,,A collection of statistics for communications between two addresses on a particular interface. For example, an instance of the matrixSDPkts object might be named matrixSDPkts.1.6.8.0.32.10.8.113.6.8.0.32.27.3.176
.1.3.6.1.2.1.16.6.3.1.1,RMON-MIB::matrixDSSourceAddress,OCTET,read-only,,current,,The source physical address.
.1.3.6.1.2.1.16.6.3.1.2,RMON-MIB::matrixDSDestAddress,OCTET,read-only,,current,,The destination physical address.
.1.3.6.1.2.1.16.6.3.1.3,RMON-MIB::matrixDSIndex,Integer32,read-only,,current,,The set of collected matrix statistics of which this entry is a part. The set of matrix statistics identified by a particular value of this index is associated with the same matrixControlEntry as identified by the same value of matrixControlIndex.
.1.3.6.1.2.1.16.6.3.1.4,RMON-MIB::matrixDSPkts,Counter32,read-only,,current,,The number of packets transmitted from the source address to the destination address (this number includes bad packets).
.1.3.6.1.2.1.16.6.3.1.5,RMON-MIB::matrixDSOctets,Counter32,read-only,,current,,The number of octets (excluding framing bits but including FCS octets) contained in all packets transmitted from the source address to the destination address.
.1.3.6.1.2.1.16.6.3.1.6,RMON-MIB::matrixDSErrors,Counter32,read-only,,current,,The number of bad packets transmitted from the source address to the destination address.
.1.3.6.1.2.1.16.6.4,RMON2-MIB::matrixControl2Table,,not-accessible,,current,,Contains the RMON-2 augmentations to RMON-1.
.1.3.6.1.2.1.16.6.4.1,RMON2-MIB::matrixControl2Entry,,not-accessible,,current,,Contains the RMON-2 augmentations to RMON-1.
.1.3.6.1.2.1.16.6.4.1.1,RMON2-MIB::matrixControlDroppedFrames,Counter32,read-only,,current,,The total number of frames that were received by the probe and therefore not accounted for in the *StatsDropEvents, but that the probe chose not to count for this entry for whatever reason. Most often, this event occurs when the probe is out of some resources and decides to shed load from this collection. This count does not include packets that were not counted because they had MAC-layer errors. Note that, unlike the dropEvents counter, this number is the exact number of frames dropped.
.1.3.6.1.2.1.16.6.4.1.2,RMON2-MIB::matrixControlCreateTime,TimeTicks,read-only,,current,,The value of sysUpTime when this control entry was last activated. This can be used by the management station to ensure that the table has not been deleted and recreated between polls.
.1.3.6.1.2.1.16.7,RMON-MIB::filter,,,,,,
.1.3.6.1.2.1.16.7.1,RMON-MIB::filterTable,,not-accessible,,current,,A list of packet filter entries.
.1.3.6.1.2.1.16.7.1.1,RMON-MIB::filterEntry,,not-accessible,filterIndex,current,,A set of parameters for a packet filter applied on a particular interface. As an example, an instance of the filterPktData object might be named filterPktData.12
.1.3.6.1.2.1.16.7.1.1.1,RMON-MIB::filterIndex,Integer32,read-only,,current,,An index that uniquely identifies an entry in the filter table. Each such entry defines one filter that is to be applied to every packet received on an interface.
.1.3.6.1.2.1.16.7.1.1.2,RMON-MIB::filterChannelIndex,Integer32,read-create,,current,,This object identifies the channel of which this filter is a part. The filters identified by a particular value of this object are associated with the same channel as identified by the same value of the channelIndex object.
.1.3.6.1.2.1.16.7.1.1.3,RMON-MIB::filterPktDataOffset,Integer32,read-create,,current,,The offset from the beginning of each packet where a match of packet data will be attempted. This offset is measured from the point in the physical layer packet after the framing bits, if any. For example, in an Ethernet frame, this point is at the beginning of the destination MAC address. This object may not be modified if the associated filterStatus object is equal to valid(1).
.1.3.6.1.2.1.16.7.1.1.4,RMON-MIB::filterPktData,OCTET,read-create,,current,,The data that is to be matched with the input packet. For each packet received, this filter and the accompanying filterPktDataMask and filterPktDataNotMask will be adjusted for the offset. The only bits relevant to this match algorithm are those that have the corresponding filterPktDataMask bit equal to one. The following three rules are then applied to every packet: (1) If the packet is too short and does not have data corresponding to part of the filterPktData, the packet will fail this data match. (2) For each relevant bit from the packet with the corresponding filterPktDataNotMask bit set to zero, if the bit from the packet is not equal to the corresponding bit from the filterPktData, then the packet will fail this data match. (3) If for every relevant bit from the packet with the corresponding filterPktDataNotMask bit set to one, the bit from the packet is equal to the corresponding bit from the filterPktData, then the packet will fail this data match. Any packets that have not failed any of the three matches above have passed this data match. In particular, a zero length filter will match any packet. This object may not be modified if the associated filterStatus object is equal to valid(1).
.1.3.6.1.2.1.16.7.1.1.5,RMON-MIB::filterPktDataMask,OCTET,read-create,,current,,The mask that is applied to the match process. After adjusting this mask for the offset, only those bits in the received packet that correspond to bits set in this mask are relevant for further processing by the match algorithm. The offset is applied to filterPktDataMask in the same way it is applied to the filter. For the purposes of the matching algorithm, if the associated filterPktData object is longer than this mask, this mask is conceptually extended with '1' bits until it reaches the length of the filterPktData object. This object may not be modified if the associated filterStatus object is equal to valid(1).
.1.3.6.1.2.1.16.7.1.1.6,RMON-MIB::filterPktDataNotMask,OCTET,read-create,,current,,The inversion mask that is applied to the match process. After adjusting this mask for the offset, those relevant bits in the received packet that correspond to bits cleared in this mask must all be equal to their corresponding bits in the filterPktData object for the packet to be accepted. In addition, at least one of those relevant bits in the received packet that correspond to bits set in this mask must be different to its corresponding bit in the filterPktData object. For the purposes of the matching algorithm, if the associated filterPktData object is longer than this mask, this mask is conceptually extended with '0' bits until it reaches the length of the filterPktData object. This object may not be modified if the associated filterStatus object is equal to valid(1).
.1.3.6.1.2.1.16.7.1.1.7,RMON-MIB::filterPktStatus,Integer32,read-create,,current,,The status that is to be matched with the input packet. The only bits relevant to this match algorithm are those that have the corresponding filterPktStatusMask bit equal to one. The following two rules are then applied to every packet: (1) For each relevant bit from the packet status with the corresponding filterPktStatusNotMask bit set to zero, if the bit from the packet status is not equal to the corresponding bit from the filterPktStatus, then the packet will fail this status match. (2) If for every relevant bit from the packet status with the corresponding filterPktStatusNotMask bit set to one, the bit from the packet status is equal to the corresponding bit from the filterPktStatus, then the packet will fail this status match. Any packets that have not failed either of the two matches above have passed this status match. In particular, a zero length status filter will match any packet's status. The value of the packet status is a sum. This sum initially takes the value zero. Then, for each error, E, that has been discovered in this packet, 2 raised to a value representing E is added to the sum. The errors and the bits that represent them are dependent on the media type of the interface that this channel is receiving packets from. The errors defined for a packet captured off of an Ethernet interface are as follows: bit # Error 0 Packet is longer than 1518 octets 1 Packet is shorter than 64 octets 2 Packet experienced a CRC or Alignment error For example, an Ethernet fragment would have a value of 6 (2^1 + 2^2). As this MIB is expanded to new media types, this object will have other media-specific errors defined. For the purposes of this status matching algorithm, if the packet status is longer than this filterPktStatus object, this object is conceptually extended with '0' bits until it reaches the size of the packet status. This object may not be modified if the associated filterStatus object is equal to valid(1).
.1.3.6.1.2.1.16.7.1.1.8,RMON-MIB::filterPktStatusMask,Integer32,read-create,,current,,The mask that is applied to the status match process. Only those bits in the received packet that correspond to bits set in this mask are relevant for further processing by the status match algorithm. For the purposes of the matching algorithm, if the associated filterPktStatus object is longer than this mask, this mask is conceptually extended with '1' bits until it reaches the size of the filterPktStatus. In addition, if a packet status is longer than this mask, this mask is conceptually extended with '0' bits until it reaches the size of the packet status. This object may not be modified if the associated filterStatus object is equal to valid(1).
.1.3.6.1.2.1.16.7.1.1.9,RMON-MIB::filterPktStatusNotMask,Integer32,read-create,,current,,The inversion mask that is applied to the status match process. Those relevant bits in the received packet status that correspond to bits cleared in this mask must all be equal to their corresponding bits in the filterPktStatus object for the packet to be accepted. In addition, at least one of those relevant bits in the received packet status that correspond to bits set in this mask must be different to its corresponding bit in the filterPktStatus object for the packet to be accepted. For the purposes of the matching algorithm, if the associated filterPktStatus object or a packet status is longer than this mask, this mask is conceptually extended with '0' bits until it reaches the longer of the lengths of the filterPktStatus object and the packet status. This object may not be modified if the associated filterStatus object is equal to valid(1).
.1.3.6.1.2.1.16.7.1.1.10,RMON-MIB::filterOwner,OCTET,read-create,,current,,The entity that configured this entry and is therefore using the resources assigned to it.
.1.3.6.1.2.1.16.7.1.1.11,RMON-MIB::filterStatus,INTEGER,read-create,,current,valid(1):createRequest(2):underCreation(3):invalid(4),The status of this filter entry.
.1.3.6.1.2.1.16.7.2,RMON-MIB::channelTable,,not-accessible,,current,,A list of packet channel entries.
.1.3.6.1.2.1.16.7.2.1,RMON-MIB::channelEntry,,not-accessible,channelIndex,current,,A set of parameters for a packet channel applied on a particular interface. As an example, an instance of the channelMatches object might be named channelMatches.3
.1.3.6.1.2.1.16.7.2.1.1,RMON-MIB::channelIndex,Integer32,read-only,,current,,An index that uniquely identifies an entry in the channel table. Each such entry defines one channel, a logical data and event stream. It is suggested that before creating a channel, an application should scan all instances of the filterChannelIndex object to make sure that there are no pre-existing filters that would be inadvertently be linked to the channel.
.1.3.6.1.2.1.16.7.2.1.2,RMON-MIB::channelIfIndex,Integer32,read-create,,current,,The value of this object uniquely identifies the interface on this remote network monitoring device to which the associated filters are applied to allow data into this channel. The interface identified by a particular value of this object is the same interface as identified by the same value of the ifIndex object, defined in RFC 2233 [17]. The filters in this group are applied to all packets on the local network segment attached to the identified interface. An agent may or may not be able to tell if fundamental changes to the media of the interface have occurred and necessitate an invalidation of this entry. For example, a hot-pluggable ethernet card could be pulled out and replaced by a token-ring card. In such a case, if the agent has such knowledge of the change, it is recommended that it invalidate this entry. This object may not be modified if the associated channelStatus object is equal to valid(1).
.1.3.6.1.2.1.16.7.2.1.3,RMON-MIB::channelAcceptType,INTEGER,read-create,,current,acceptMatched(1):acceptFailed(2),This object controls the action of the filters associated with this channel. If this object is equal to acceptMatched(1), packets will be accepted to this channel if they are accepted by both the packet data and packet status matches of an associated filter. If this object is equal to acceptFailed(2), packets will be accepted to this channel only if they fail either the packet data match or the packet status match of each of the associated filters. In particular, a channel with no associated filters will match no packets if set to acceptMatched(1) case and will match all packets in the acceptFailed(2) case. This object may not be modified if the associated channelStatus object is equal to valid(1).
.1.3.6.1.2.1.16.7.2.1.4,RMON-MIB::channelDataControl,INTEGER,read-create,,current,on(1):off(2),This object controls the flow of data through this channel. If this object is on(1), data, status and events flow through this channel. If this object is off(2), data, status and events will not flow through this channel.
.1.3.6.1.2.1.16.7.2.1.5,RMON-MIB::channelTurnOnEventIndex,Integer32,read-create,,current,,The value of this object identifies the event that is configured to turn the associated channelDataControl from off to on when the event is generated. The event identified by a particular value of this object is the same event as identified by the same value of the eventIndex object. If there is no corresponding entry in the eventTable, then no association exists. In fact, if no event is intended for this channel, channelTurnOnEventIndex must be set to zero, a non-existent event index. This object may not be modified if the associated channelStatus object is equal to valid(1).
.1.3.6.1.2.1.16.7.2.1.6,RMON-MIB::channelTurnOffEventIndex,Integer32,read-create,,current,,The value of this object identifies the event that is configured to turn the associated channelDataControl from on to off when the event is generated. The event identified by a particular value of this object is the same event as identified by the same value of the eventIndex object. If there is no corresponding entry in the eventTable, then no association exists. In fact, if no event is intended for this channel, channelTurnOffEventIndex must be set to zero, a non-existent event index. This object may not be modified if the associated channelStatus object is equal to valid(1).
.1.3.6.1.2.1.16.7.2.1.7,RMON-MIB::channelEventIndex,Integer32,read-create,,current,,The value of this object identifies the event that is configured to be generated when the associated channelDataControl is on and a packet is matched. The event identified by a particular value of this object is the same event as identified by the same value of the eventIndex object. If there is no corresponding entry in the eventTable, then no association exists. In fact, if no event is intended for this channel, channelEventIndex must be set to zero, a non-existent event index. This object may not be modified if the associated channelStatus object is equal to valid(1).
.1.3.6.1.2.1.16.7.2.1.8,RMON-MIB::channelEventStatus,INTEGER,read-create,,current,eventReady(1):eventFired(2):eventAlwaysReady(3),The event status of this channel. If this channel is configured to generate events when packets are matched, a means of controlling the flow of those events is often needed. When this object is equal to eventReady(1), a single event may be generated, after which this object will be set by the probe to eventFired(2). While in the eventFired(2) state, no events will be generated until the object is modified to eventReady(1) (or eventAlwaysReady(3)). The management station can thus easily respond to a notification of an event by re-enabling this object. If the management station wishes to disable this flow control and allow events to be generated at will, this object may be set to eventAlwaysReady(3). Disabling the flow control is discouraged as it can result in high network traffic or other performance problems.
.1.3.6.1.2.1.16.7.2.1.9,RMON-MIB::channelMatches,Counter32,read-only,,current,,The number of times this channel has matched a packet. Note that this object is updated even when channelDataControl is set to off.
.1.3.6.1.2.1.16.7.2.1.10,RMON-MIB::channelDescription,OCTET,read-create,,current,,A comment describing this channel.
.1.3.6.1.2.1.16.7.2.1.11,RMON-MIB::channelOwner,OCTET,read-create,,current,,The entity that configured this entry and is therefore using the resources assigned to it.
.1.3.6.1.2.1.16.7.2.1.12,RMON-MIB::channelStatus,INTEGER,read-create,,current,valid(1):createRequest(2):underCreation(3):invalid(4),The status of this channel entry.
.1.3.6.1.2.1.16.7.3,RMON2-MIB::channel2Table,,not-accessible,,current,,Contains the RMON-2 augmentations to RMON-1.
.1.3.6.1.2.1.16.7.3.1,RMON2-MIB::channel2Entry,,not-accessible,,current,,Contains the RMON-2 augmentations to RMON-1.
.1.3.6.1.2.1.16.7.3.1.1,RMON2-MIB::channelDroppedFrames,Counter32,read-only,,current,,The total number of frames that were received by the probe and therefore not accounted for in the *StatsDropEvents, but that the probe chose not to count for this entry for whatever reason. Most often, this event occurs when the probe is out of some resources and decides to shed load from this collection. This count does not include packets that were not counted because they had MAC-layer errors. Note that, unlike the dropEvents counter, this number is the exact number of frames dropped.
.1.3.6.1.2.1.16.7.3.1.2,RMON2-MIB::channelCreateTime,TimeTicks,read-only,,current,,The value of sysUpTime when this control entry was last activated. This can be used by the management station to ensure that the table has not been deleted and recreated between polls.
.1.3.6.1.2.1.16.7.4,RMON2-MIB::filter2Table,,not-accessible,,current,,Provides a variable-length packet filter feature to the RMON-1 filter table.
.1.3.6.1.2.1.16.7.4.1,RMON2-MIB::filter2Entry,,not-accessible,,current,,Provides a variable-length packet filter feature to the RMON-1 filter table.
.1.3.6.1.2.1.16.7.4.1.1,RMON2-MIB::filterProtocolDirDataLocalIndex,Integer32,read-create,,current,,When this object is set to a non-zero value, the filter that it is associated with performs the following operations on every packet: 1) If the packet doesn't match the protocol directory entry identified by this object, discard the packet and exit (i.e., discard the packet if it is not of the identified protocol). 2) If the associated filterProtocolDirLocalIndex is non-zero and the packet doesn't match the protocol directory entry identified by that object, discard the packet and exit. 3) If the packet matches, perform the regular filter algorithm as if the beginning of this named protocol is the beginning of the packet, potentially applying the filterOffset value to move further into the packet.
.1.3.6.1.2.1.16.7.4.1.2,RMON2-MIB::filterProtocolDirLocalIndex,Integer32,read-create,,current,,When this object is set to a non-zero value, the filter that it is associated with will discard the packet if the packet doesn't match this protocol directory entry.
.1.3.6.1.2.1.16.8,RMON-MIB::capture,,,,,,
.1.3.6.1.2.1.16.8.1,RMON-MIB::bufferControlTable,,not-accessible,,current,,A list of buffers control entries.
.1.3.6.1.2.1.16.8.1.1,RMON-MIB::bufferControlEntry,,not-accessible,bufferControlIndex,current,,A set of parameters that control the collection of a stream of packets that have matched filters. As an example, an instance of the bufferControlCaptureSliceSize object might be named bufferControlCaptureSliceSize.3
.1.3.6.1.2.1.16.8.1.1.1,RMON-MIB::bufferControlIndex,Integer32,read-only,,current,,An index that uniquely identifies an entry in the bufferControl table. The value of this index shall never be zero. Each such entry defines one set of packets that is captured and controlled by one or more filters.
.1.3.6.1.2.1.16.8.1.1.2,RMON-MIB::bufferControlChannelIndex,Integer32,read-create,,current,,An index that identifies the channel that is the source of packets for this bufferControl table. The channel identified by a particular value of this index is the same as identified by the same value of the channelIndex object. This object may not be modified if the associated bufferControlStatus object is equal to valid(1).
.1.3.6.1.2.1.16.8.1.1.3,RMON-MIB::bufferControlFullStatus,INTEGER,read-only,,current,spaceAvailable(1):full(2),This object shows whether the buffer has room to accept new packets or if it is full. If the status is spaceAvailable(1), the buffer is accepting new packets normally. If the status is full(2) and the associated bufferControlFullAction object is wrapWhenFull, the buffer is accepting new packets by deleting enough of the oldest packets to make room for new ones as they arrive. Otherwise, if the status is full(2) and the bufferControlFullAction object is lockWhenFull, then the buffer has stopped collecting packets. When this object is set to full(2) the probe must not later set it to spaceAvailable(1) except in the case of a significant gain in resources such as an increase of bufferControlOctetsGranted. In particular, the wrap-mode action of deleting old packets to make room for newly arrived packets must not affect the value of this object.
.1.3.6.1.2.1.16.8.1.1.4,RMON-MIB::bufferControlFullAction,INTEGER,read-create,,current,lockWhenFull(1):wrapWhenFull(2),Controls the action of the buffer when it reaches the full status. When in the lockWhenFull(1) state and a packet is added to the buffer that fills the buffer, the bufferControlFullStatus will be set to full(2) and this buffer will stop capturing packets.
.1.3.6.1.2.1.16.8.1.1.5,RMON-MIB::bufferControlCaptureSliceSize,Integer32,read-create,,current,,The maximum number of octets of each packet that will be saved in this capture buffer. For example, if a 1500 octet packet is received by the probe and this object is set to 500, then only 500 octets of the packet will be stored in the associated capture buffer. If this variable is set to 0, the capture buffer will save as many octets as is possible. This object may not be modified if the associated bufferControlStatus object is equal to valid(1).
.1.3.6.1.2.1.16.8.1.1.6,RMON-MIB::bufferControlDownloadSliceSize,Integer32,read-create,,current,,The maximum number of octets of each packet in this capture buffer that will be returned in an SNMP retrieval of that packet. For example, if 500 octets of a packet have been stored in the associated capture buffer, the associated bufferControlDownloadOffset is 0, and this object is set to 100, then the captureBufferPacket object that contains the packet will contain only the first 100 octets of the packet. A prudent manager will take into account possible interoperability or fragmentation problems that may occur if the download slice size is set too large. In particular, conformant SNMP implementations are not required to accept messages whose length exceeds 484 octets, although they are encouraged to support larger datagrams whenever feasible.
.1.3.6.1.2.1.16.8.1.1.7,RMON-MIB::bufferControlDownloadOffset,Integer32,read-create,,current,,The offset of the first octet of each packet in this capture buffer that will be returned in an SNMP retrieval of that packet. For example, if 500 octets of a packet have been stored in the associated capture buffer and this object is set to 100, then the captureBufferPacket object that contains the packet will contain bytes starting 100 octets into the packet.
.1.3.6.1.2.1.16.8.1.1.8,RMON-MIB::bufferControlMaxOctetsRequested,Integer32,read-create,,current,,The requested maximum number of octets to be saved in this captureBuffer, including any implementation-specific overhead. If this variable is set to -1, the capture buffer will save as many octets as is possible. When this object is created or modified, the probe should set bufferControlMaxOctetsGranted as closely to this object as is possible for the particular probe implementation and available resources. However, if the object has the special value of -1, the probe must set bufferControlMaxOctetsGranted to -1.
.1.3.6.1.2.1.16.8.1.1.9,RMON-MIB::bufferControlMaxOctetsGranted,Integer32,read-only,,current,,The maximum number of octets that can be saved in this captureBuffer, including overhead. If this variable is -1, the capture buffer will save as many octets as possible. When the bufferControlMaxOctetsRequested object is created or modified, the probe should set this object as closely to the requested value as is possible for the particular probe implementation and available resources. However, if the request object has the special value of -1, the probe must set this object to -1. The probe must not lower this value except as a result of a modification to the associated bufferControlMaxOctetsRequested object. When this maximum number of octets is reached and a new packet is to be added to this capture buffer and the corresponding bufferControlFullAction is set to wrapWhenFull(2), enough of the oldest packets associated with this capture buffer shall be deleted by the agent so that the new packet can be added. If the corresponding bufferControlFullAction is set to lockWhenFull(1), the new packet shall be discarded. In either case, the probe must set bufferControlFullStatus to full(2). When the value of this object changes to a value less than the current value, entries are deleted from the captureBufferTable associated with this bufferControlEntry. Enough of the oldest of these captureBufferEntries shall be deleted by the agent so that the number of octets used remains less than or equal to the new value of this object. When the value of this object changes to a value greater than the current value, the number of associated captureBufferEntries may be allowed to grow.
.1.3.6.1.2.1.16.8.1.1.10,RMON-MIB::bufferControlCapturedPackets,Integer32,read-only,,current,,The number of packets currently in this captureBuffer.
.1.3.6.1.2.1.16.8.1.1.11,RMON-MIB::bufferControlTurnOnTime,TimeTicks,read-only,,current,,The value of sysUpTime when this capture buffer was first turned on.
.1.3.6.1.2.1.16.8.1.1.12,RMON-MIB::bufferControlOwner,OCTET,read-create,,current,,The entity that configured this entry and is therefore using the resources assigned to it.
.1.3.6.1.2.1.16.8.1.1.13,RMON-MIB::bufferControlStatus,INTEGER,read-create,,current,valid(1):createRequest(2):underCreation(3):invalid(4),The status of this buffer Control Entry.
.1.3.6.1.2.1.16.8.2,RMON-MIB::captureBufferTable,,not-accessible,,current,,A list of packets captured off of a channel.
.1.3.6.1.2.1.16.8.2.1,RMON-MIB::captureBufferEntry,,not-accessible,captureBufferControlIndex:captureBufferIndex,current,,A packet captured off of an attached network. As an example, an instance of the captureBufferPacketData object might be named captureBufferPacketData.3.1783
.1.3.6.1.2.1.16.8.2.1.1,RMON-MIB::captureBufferControlIndex,Integer32,read-only,,current,,The index of the bufferControlEntry with which this packet is associated.
.1.3.6.1.2.1.16.8.2.1.2,RMON-MIB::captureBufferIndex,Integer32,read-only,,current,,An index that uniquely identifies an entry in the captureBuffer table associated with a particular bufferControlEntry. This index will start at 1 and increase by one for each new packet added with the same captureBufferControlIndex. Should this value reach 2147483647, the next packet added with the same captureBufferControlIndex shall cause this value to wrap around to 1.
.1.3.6.1.2.1.16.8.2.1.3,RMON-MIB::captureBufferPacketID,Integer32,read-only,,current,,An index that describes the order of packets that are received on a particular interface. The packetID of a packet captured on an interface is defined to be greater than the packetID's of all packets captured previously on the same interface. As the captureBufferPacketID object has a maximum positive value of 2^31 - 1, any captureBufferPacketID object shall have the value of the associated packet's packetID mod 2^31.
.1.3.6.1.2.1.16.8.2.1.4,RMON-MIB::captureBufferPacketData,OCTET,read-only,,current,,The data inside the packet, starting at the beginning of the packet plus any offset specified in the associated bufferControlDownloadOffset, including any link level headers. The length of the data in this object is the minimum of the length of the captured packet minus the offset, the length of the associated bufferControlCaptureSliceSize minus the offset, and the associated bufferControlDownloadSliceSize. If this minimum is less than zero, this object shall have a length of zero.
.1.3.6.1.2.1.16.8.2.1.5,RMON-MIB::captureBufferPacketLength,Integer32,read-only,,current,,The actual length (off the wire) of the packet stored in this entry, including FCS octets.
.1.3.6.1.2.1.16.8.2.1.6,RMON-MIB::captureBufferPacketTime,Integer32,read-only,,current,,The number of milliseconds that had passed since this capture buffer was first turned on when this packet was captured.
.1.3.6.1.2.1.16.8.2.1.7,RMON-MIB::captureBufferPacketStatus,Integer32,read-only,,current,,A value which indicates the error status of this packet. The value of this object is defined in the same way as filterPktStatus. The value is a sum. This sum initially takes the value zero. Then, for each error, E, that has been discovered in this packet, 2 raised to a value representing E is added to the sum. The errors defined for a packet captured off of an Ethernet interface are as follows: bit # Error 0 Packet is longer than 1518 octets 1 Packet is shorter than 64 octets 2 Packet experienced a CRC or Alignment error 3 First packet in this capture buffer after it was detected that some packets were not processed correctly. 4 Packet's order in buffer is only approximate (May only be set for packets sent from the probe) For example, an Ethernet fragment would have a value of 6 (2^1 + 2^2). As this MIB is expanded to new media types, this object will have other media-specific errors defined.
.1.3.6.1.2.1.16.9,RMON-MIB::event,,,,,,
.1.3.6.1.2.1.16.9.1,RMON-MIB::eventTable,,not-accessible,,current,,A list of events to be generated.
.1.3.6.1.2.1.16.9.1.1,RMON-MIB::eventEntry,,not-accessible,eventIndex,current,,A set of parameters that describe an event to be generated when certain conditions are met. As an example, an instance of the eventLastTimeSent object might be named eventLastTimeSent.6
.1.3.6.1.2.1.16.9.1.1.1,RMON-MIB::eventIndex,Integer32,read-only,,current,,An index that uniquely identifies an entry in the event table. Each such entry defines one event that is to be generated when the appropriate conditions occur.
.1.3.6.1.2.1.16.9.1.1.2,RMON-MIB::eventDescription,OCTET,read-create,,current,,A comment describing this event entry.
.1.3.6.1.2.1.16.9.1.1.3,RMON-MIB::eventType,INTEGER,read-create,,current,none(1):log(2):snmptrap(3):logandtrap(4),The type of notification that the probe will make about this event. In the case of log, an entry is made in the log table for each event. In the case of snmp-trap, an SNMP trap is sent to one or more management stations.
.1.3.6.1.2.1.16.9.1.1.4,RMON-MIB::eventCommunity,OCTET,read-create,,current,,If an SNMP trap is to be sent, it will be sent to the SNMP community specified by this octet string.
.1.3.6.1.2.1.16.9.1.1.5,RMON-MIB::eventLastTimeSent,TimeTicks,read-only,,current,,The value of sysUpTime at the time this event entry last generated an event. If this entry has not generated any events, this value will be zero.
.1.3.6.1.2.1.16.9.1.1.6,RMON-MIB::eventOwner,OCTET,read-create,,current,,The entity that configured this entry and is therefore using the resources assigned to it. If this object contains a string starting with 'monitor' and has associated entries in the log table, all connected management stations should retrieve those log entries, as they may have significance to all management stations connected to this device
.1.3.6.1.2.1.16.9.1.1.7,RMON-MIB::eventStatus,INTEGER,read-create,,current,valid(1):createRequest(2):underCreation(3):invalid(4),The status of this event entry. If this object is not equal to valid(1), all associated log entries shall be deleted by the agent.
.1.3.6.1.2.1.16.9.2,RMON-MIB::logTable,,not-accessible,,current,,A list of events that have been logged.
.1.3.6.1.2.1.16.9.2.1,RMON-MIB::logEntry,,not-accessible,logEventIndex:logIndex,current,,A set of data describing an event that has been logged. For example, an instance of the logDescription object might be named logDescription.6.47
.1.3.6.1.2.1.16.9.2.1.1,RMON-MIB::logEventIndex,Integer32,read-only,,current,,The event entry that generated this log entry. The log identified by a particular value of this index is associated with the same eventEntry as identified by the same value of eventIndex.
.1.3.6.1.2.1.16.9.2.1.2,RMON-MIB::logIndex,Integer32,read-only,,current,,An index that uniquely identifies an entry in the log table amongst those generated by the same eventEntries. These indexes are assigned beginning with 1 and increase by one with each new log entry. The association between values of logIndex and logEntries is fixed for the lifetime of each logEntry. The agent may choose to delete the oldest instances of logEntry as required because of lack of memory. It is an implementation-specific matter as to when this deletion may occur.
.1.3.6.1.2.1.16.9.2.1.3,RMON-MIB::logTime,TimeTicks,read-only,,current,,The value of sysUpTime when this log entry was created.
.1.3.6.1.2.1.16.9.2.1.4,RMON-MIB::logDescription,OCTET,read-only,,current,,An implementation dependent description of the event that activated this log entry.
.1.3.6.1.2.1.16.10,TOKEN-RING-RMON-MIB::tokenRing,,,,,,
.1.3.6.1.2.1.16.10.1,TOKEN-RING-RMON-MIB::ringStationControlTable,,not-accessible,,mandatory,,A list of ringStation table control entries.
.1.3.6.1.2.1.16.10.1.1,TOKEN-RING-RMON-MIB::ringStationControlEntry,,not-accessible,ringStationControlIfIndex,mandatory,,A list of parameters that set up the discovery of stations on a particular interface and the collection of statistics about these stations.
.1.3.6.1.2.1.16.10.1.1.1,TOKEN-RING-RMON-MIB::ringStationControlIfIndex,INTEGER,read-only,,mandatory,,The value of this object uniquely identifies the interface on this remote network monitoring device from which ringStation data is collected. The interface identified by a particular value of this object is the same interface as identified by the same value of the ifIndex object, defined in MIB- II [3].
.1.3.6.1.2.1.16.10.1.1.2,TOKEN-RING-RMON-MIB::ringStationControlTableSize,INTEGER,read-only,,mandatory,,The number of ringStationEntries in the ringStationTable associated with this ringStationControlEntry.
.1.3.6.1.2.1.16.10.1.1.3,TOKEN-RING-RMON-MIB::ringStationControlActiveStations,INTEGER,read-only,,mandatory,,The number of active ringStationEntries in the ringStationTable associated with this ringStationControlEntry.
.1.3.6.1.2.1.16.10.1.1.4,TOKEN-RING-RMON-MIB::ringStationControlRingState,INTEGER,read-only,,mandatory,normalOperation(1):ringPurgeState(2):claimTokenState(3):beaconFrameStreamingState(4):beaconBitStreamingState(5):beaconRingSignalLossState(6):beaconSetRecoveryModeState(7),The current status of this ring.
.1.3.6.1.2.1.16.10.1.1.5,TOKEN-RING-RMON-MIB::ringStationControlBeaconSender,OCTET,read-only,,mandatory,,The address of the sender of the last beacon frame received by the probe on this ring. If no beacon frames have been received, this object shall be equal to six octets of zero.
.1.3.6.1.2.1.16.10.1.1.6,TOKEN-RING-RMON-MIB::ringStationControlBeaconNAUN,OCTET,read-only,,mandatory,,The address of the NAUN in the last beacon frame received by the probe on this ring. If no beacon frames have been received, this object shall be equal to six octets of zero.
.1.3.6.1.2.1.16.10.1.1.7,TOKEN-RING-RMON-MIB::ringStationControlActiveMonitor,OCTET,read-only,,mandatory,,The address of the Active Monitor on this segment. If this address is unknown, this object shall be equal to six octets of zero.
.1.3.6.1.2.1.16.10.1.1.8,TOKEN-RING-RMON-MIB::ringStationControlOrderChanges,Counter32,read-only,,mandatory,,The number of add and delete events in the ringStationOrderTable optionally associated with this ringStationControlEntry.
.1.3.6.1.2.1.16.10.1.1.9,TOKEN-RING-RMON-MIB::ringStationControlOwner,OCTET,read-write,,mandatory,,The entity that configured this entry and is therefore using the resources assigned to it.
.1.3.6.1.2.1.16.10.1.1.10,TOKEN-RING-RMON-MIB::ringStationControlStatus,INTEGER,read-write,,mandatory,valid(1):createRequest(2):underCreation(3):invalid(4),The status of this ringStationControl entry. If this object is not equal to valid(1), all associated entries in the ringStationTable shall be deleted by the agent.
.1.3.6.1.2.1.16.10.2,TOKEN-RING-RMON-MIB::ringStationTable,,not-accessible,,mandatory,,A list of ring station entries. An entry will exist for each station that is now or has previously been detected as physically present on this ring.
.1.3.6.1.2.1.16.10.2.1,TOKEN-RING-RMON-MIB::ringStationEntry,,not-accessible,ringStationIfIndex:ringStationMacAddress,mandatory,,A collection of statistics for a particular station that has been discovered on a ring monitored by this device.
.1.3.6.1.2.1.16.10.2.1.1,TOKEN-RING-RMON-MIB::ringStationIfIndex,INTEGER,read-only,,mandatory,,The value of this object uniquely identifies the interface on this remote network monitoring device on which this station was detected. The interface identified by a particular value of this object is the same interface as identified by the same value of the ifIndex object, defined in MIB-II [3].
.1.3.6.1.2.1.16.10.2.1.2,TOKEN-RING-RMON-MIB::ringStationMacAddress,OCTET,read-only,,mandatory,,The physical address of this station.
.1.3.6.1.2.1.16.10.2.1.3,TOKEN-RING-RMON-MIB::ringStationLastNAUN,OCTET,read-only,,mandatory,,The physical address of last known NAUN of this station.
.1.3.6.1.2.1.16.10.2.1.4,TOKEN-RING-RMON-MIB::ringStationStationStatus,INTEGER,read-only,,mandatory,active(1):inactive(2):forcedRemoval(3),The status of this station on the ring.
.1.3.6.1.2.1.16.10.2.1.5,TOKEN-RING-RMON-MIB::ringStationLastEnterTime,TimeTicks,read-only,,mandatory,,The value of sysUpTime at the time this station last entered the ring. If the time is unknown, this value shall be zero.
.1.3.6.1.2.1.16.10.2.1.6,TOKEN-RING-RMON-MIB::ringStationLastExitTime,TimeTicks,read-only,,mandatory,,The value of sysUpTime at the time the probe detected that this station last exited the ring. If the time is unknown, this value shall be zero.
.1.3.6.1.2.1.16.10.2.1.7,TOKEN-RING-RMON-MIB::ringStationDuplicateAddresses,Counter32,read-only,,mandatory,,The number of times this station experienced a duplicate address error.
.1.3.6.1.2.1.16.10.2.1.8,TOKEN-RING-RMON-MIB::ringStationInLineErrors,Counter32,read-only,,mandatory,,The total number of line errors reported by this station in error reporting packets detected by the probe.
.1.3.6.1.2.1.16.10.2.1.9,TOKEN-RING-RMON-MIB::ringStationOutLineErrors,Counter32,read-only,,mandatory,,The total number of line errors reported in error reporting packets sent by the nearest active downstream neighbor of this station and detected by the probe.
.1.3.6.1.2.1.16.10.2.1.10,TOKEN-RING-RMON-MIB::ringStationInternalErrors,Counter32,read-only,,mandatory,,The total number of adapter internal errors reported by this station in error reporting packets detected by the probe.
.1.3.6.1.2.1.16.10.2.1.11,TOKEN-RING-RMON-MIB::ringStationInBurstErrors,Counter32,read-only,,mandatory,,The total number of burst errors reported by this station in error reporting packets detected by the probe.
.1.3.6.1.2.1.16.10.2.1.12,TOKEN-RING-RMON-MIB::ringStationOutBurstErrors,Counter32,read-only,,mandatory,,The total number of burst errors reported in error reporting packets sent by the nearest active downstream neighbor of this station and detected by the probe.
.1.3.6.1.2.1.16.10.2.1.13,TOKEN-RING-RMON-MIB::ringStationACErrors,Counter32,read-only,,mandatory,,The total number of AC (Address Copied) errors reported in error reporting packets sent by the nearest active downstream neighbor of this station and detected by the probe.
.1.3.6.1.2.1.16.10.2.1.14,TOKEN-RING-RMON-MIB::ringStationAbortErrors,Counter32,read-only,,mandatory,,The total number of abort delimiters reported by this station in error reporting packets detected by the probe.
.1.3.6.1.2.1.16.10.2.1.15,TOKEN-RING-RMON-MIB::ringStationLostFrameErrors,Counter32,read-only,,mandatory,,The total number of lost frame errors reported by this station in error reporting packets detected by the probe.
.1.3.6.1.2.1.16.10.2.1.16,TOKEN-RING-RMON-MIB::ringStationCongestionErrors,Counter32,read-only,,mandatory,,The total number of receive congestion errors reported by this station in error reporting packets detected by the probe.
.1.3.6.1.2.1.16.10.2.1.17,TOKEN-RING-RMON-MIB::ringStationFrameCopiedErrors,Counter32,read-only,,mandatory,,The total number of frame copied errors reported by this station in error reporting packets detected by the probe.
.1.3.6.1.2.1.16.10.2.1.18,TOKEN-RING-RMON-MIB::ringStationFrequencyErrors,Counter32,read-only,,mandatory,,The total number of frequency errors reported by this station in error reporting packets detected by the probe.
.1.3.6.1.2.1.16.10.2.1.19,TOKEN-RING-RMON-MIB::ringStationTokenErrors,Counter32,read-only,,mandatory,,The total number of token errors reported by this station in error reporting frames detected by the probe.
.1.3.6.1.2.1.16.10.2.1.20,TOKEN-RING-RMON-MIB::ringStationInBeaconErrors,Counter32,read-only,,mandatory,,The total number of beacon frames sent by this station and detected by the probe.
.1.3.6.1.2.1.16.10.2.1.21,TOKEN-RING-RMON-MIB::ringStationOutBeaconErrors,Counter32,read-only,,mandatory,,The total number of beacon frames detected by the probe that name this station as the NAUN.
.1.3.6.1.2.1.16.10.2.1.22,TOKEN-RING-RMON-MIB::ringStationInsertions,Counter32,read-only,,mandatory,,The number of times the probe detected this station inserting onto the ring.
.1.3.6.1.2.1.16.10.3,TOKEN-RING-RMON-MIB::ringStationOrderTable,,not-accessible,,mandatory,,A list of ring station entries for stations in the ring poll, ordered by their ring-order.
.1.3.6.1.2.1.16.10.3.1,TOKEN-RING-RMON-MIB::ringStationOrderEntry,,not-accessible,ringStationOrderIfIndex:ringStationOrderOrderIndex,mandatory,,A collection of statistics for a particular station that is active on a ring monitored by this device. This table will contain information for every interface that has a ringStationControlStatus equal to valid.
.1.3.6.1.2.1.16.10.3.1.1,TOKEN-RING-RMON-MIB::ringStationOrderIfIndex,INTEGER,read-only,,mandatory,,The value of this object uniquely identifies the interface on this remote network monitoring device on which this station was detected. The interface identified by a particular value of this object is the same interface as identified by the same value of the ifIndex object, defined in MIB-II [3].
.1.3.6.1.2.1.16.10.3.1.2,TOKEN-RING-RMON-MIB::ringStationOrderOrderIndex,INTEGER,read-only,,mandatory,,This index denotes the location of this station with respect to other stations on the ring. This index is one more than the number of hops downstream that this station is from the rmon probe. The rmon probe itself gets the value one.
.1.3.6.1.2.1.16.10.3.1.3,TOKEN-RING-RMON-MIB::ringStationOrderMacAddress,OCTET,read-only,,mandatory,,The physical address of this station.
.1.3.6.1.2.1.16.10.4,TOKEN-RING-RMON-MIB::ringStationConfigControlTable,,not-accessible,,mandatory,,A list of ring station configuration control entries.
.1.3.6.1.2.1.16.10.4.1,TOKEN-RING-RMON-MIB::ringStationConfigControlEntry,,not-accessible,ringStationConfigControlIfIndex:ringStationConfigControlMacAddress,mandatory,,This entry controls active management of stations by the probe. One entry exists in this table for each active station in the ringStationTable.
.1.3.6.1.2.1.16.10.4.1.1,TOKEN-RING-RMON-MIB::ringStationConfigControlIfIndex,INTEGER,read-only,,mandatory,,The value of this object uniquely identifies the interface on this remote network monitoring device on which this station was detected. The interface identified by a particular value of this object is the same interface as identified by the same value of the ifIndex object, defined in MIB-II [3].
.1.3.6.1.2.1.16.10.4.1.2,TOKEN-RING-RMON-MIB::ringStationConfigControlMacAddress,OCTET,read-only,,mandatory,,The physical address of this station.
.1.3.6.1.2.1.16.10.4.1.3,TOKEN-RING-RMON-MIB::ringStationConfigControlRemove,INTEGER,read-write,,mandatory,stable(1):removing(2),Setting this object to `removing(2)' causes a Remove Station MAC frame to be sent. The agent will set this object to `stable(1)' after processing the request.
.1.3.6.1.2.1.16.10.4.1.4,TOKEN-RING-RMON-MIB::ringStationConfigControlUpdateStats,INTEGER,read-write,,mandatory,stable(1):updating(2),Setting this object to `updating(2)' causes the configuration information associate with this entry to be updated. The agent will set this object to `stable(1)' after processing the request.
.1.3.6.1.2.1.16.10.5,TOKEN-RING-RMON-MIB::ringStationConfigTable,,not-accessible,,mandatory,,A list of configuration entries for stations on a ring monitored by this probe.
.1.3.6.1.2.1.16.10.5.1,TOKEN-RING-RMON-MIB::ringStationConfigEntry,,not-accessible,ringStationConfigIfIndex:ringStationConfigMacAddress,mandatory,,A collection of statistics for a particular station that has been discovered on a ring monitored by this probe.
.1.3.6.1.2.1.16.10.5.1.1,TOKEN-RING-RMON-MIB::ringStationConfigIfIndex,INTEGER,read-only,,mandatory,,The value of this object uniquely identifies the interface on this remote network monitoring device on which this station was detected. The interface identified by a particular value of this object is the same interface as identified by the same value of the ifIndex object, defined in MIB-II [3].
.1.3.6.1.2.1.16.10.5.1.2,TOKEN-RING-RMON-MIB::ringStationConfigMacAddress,OCTET,read-only,,mandatory,,The physical address of this station.
.1.3.6.1.2.1.16.10.5.1.3,TOKEN-RING-RMON-MIB::ringStationConfigUpdateTime,TimeTicks,read-only,,mandatory,,The value of sysUpTime at the time this configuration information was last updated (completely).
.1.3.6.1.2.1.16.10.5.1.4,TOKEN-RING-RMON-MIB::ringStationConfigLocation,OCTET,read-only,,mandatory,,The assigned physical location of this station.
.1.3.6.1.2.1.16.10.5.1.5,TOKEN-RING-RMON-MIB::ringStationConfigMicrocode,OCTET,read-only,,mandatory,,The microcode EC level of this station.
.1.3.6.1.2.1.16.10.5.1.6,TOKEN-RING-RMON-MIB::ringStationConfigGroupAddress,OCTET,read-only,,mandatory,,The low-order 4 octets of the group address recognized by this station.
.1.3.6.1.2.1.16.10.5.1.7,TOKEN-RING-RMON-MIB::ringStationConfigFunctionalAddress,OCTET,read-only,,mandatory,,the functional addresses recognized by this station.
.1.3.6.1.2.1.16.10.6,TOKEN-RING-RMON-MIB::sourceRoutingStatsTable,,not-accessible,,mandatory,,A list of source routing statistics entries.
.1.3.6.1.2.1.16.10.6.1,TOKEN-RING-RMON-MIB::sourceRoutingStatsEntry,,not-accessible,sourceRoutingStatsIfIndex,mandatory,,A collection of source routing statistics kept for a particular Token Ring interface.
.1.3.6.1.2.1.16.10.6.1.1,TOKEN-RING-RMON-MIB::sourceRoutingStatsIfIndex,INTEGER,read-only,,mandatory,,The value of this object uniquely identifies the interface on this remote network monitoring device on which source routing statistics will be detected. The interface identified by a particular value of this object is the same interface as identified by the same value of the ifIndex object, defined in MIB-II [3].
.1.3.6.1.2.1.16.10.6.1.2,TOKEN-RING-RMON-MIB::sourceRoutingStatsRingNumber,INTEGER,read-only,,mandatory,,The ring number of the ring monitored by this entry. When any object in this entry is created, the probe will attempt to discover the ring number. Only after the ring number is discovered will this object be created. After creating an object in this entry, the management station should poll this object to detect when it is created. Only after this object is created can the management station set the sourceRoutingStatsStatus entry to valid(1).
.1.3.6.1.2.1.16.10.6.1.3,TOKEN-RING-RMON-MIB::sourceRoutingStatsInFrames,Counter32,read-only,,mandatory,,The count of frames sent into this ring from another ring.
.1.3.6.1.2.1.16.10.6.1.4,TOKEN-RING-RMON-MIB::sourceRoutingStatsOutFrames,Counter32,read-only,,mandatory,,The count of frames sent from this ring to another ring.
.1.3.6.1.2.1.16.10.6.1.5,TOKEN-RING-RMON-MIB::sourceRoutingStatsThroughFrames,Counter32,read-only,,mandatory,,The count of frames sent from another ring, through this ring, to another ring.
.1.3.6.1.2.1.16.10.6.1.6,TOKEN-RING-RMON-MIB::sourceRoutingStatsAllRoutesBroadcastFrames,Counter32,read-only,,mandatory,,The total number of good frames received that were All Routes Broadcast.
.1.3.6.1.2.1.16.10.6.1.7,TOKEN-RING-RMON-MIB::sourceRoutingStatsSingleRouteBroadcastFrames,Counter32,read-only,,mandatory,,The total number of good frames received that were Single Route Broadcast.
.1.3.6.1.2.1.16.10.6.1.8,TOKEN-RING-RMON-MIB::sourceRoutingStatsInOctets,Counter32,read-only,,mandatory,,The count of octets in good frames sent into this ring from another ring.
.1.3.6.1.2.1.16.10.6.1.9,TOKEN-RING-RMON-MIB::sourceRoutingStatsOutOctets,Counter32,read-only,,mandatory,,The count of octets in good frames sent from this ring to another ring.
.1.3.6.1.2.1.16.10.6.1.10,TOKEN-RING-RMON-MIB::sourceRoutingStatsThroughOctets,Counter32,read-only,,mandatory,,The count of octets in good frames sent another ring, through this ring, to another ring.
.1.3.6.1.2.1.16.10.6.1.11,TOKEN-RING-RMON-MIB::sourceRoutingStatsAllRoutesBroadcastOctets,Counter32,read-only,,mandatory,,The total number of octets in good frames received that were All Routes Broadcast.
.1.3.6.1.2.1.16.10.6.1.12,TOKEN-RING-RMON-MIB::sourceRoutingStatsSingleRoutesBroadcastOctets,Counter32,read-only,,mandatory,,The total number of octets in good frames received that were Single Route Broadcast.
.1.3.6.1.2.1.16.10.6.1.13,TOKEN-RING-RMON-MIB::sourceRoutingStatsLocalLLCFrames,Counter32,read-only,,mandatory,,The total number of frames received who had no RIF field (or had a RIF field that only included the local ring's number) and were not All Route Broadcast Frames.
.1.3.6.1.2.1.16.10.6.1.14,TOKEN-RING-RMON-MIB::sourceRoutingStats1HopFrames,Counter32,read-only,,mandatory,,The total number of frames received whose route had 1 hop, were not All Route Broadcast Frames, and whose source or destination were on this ring (i.e. frames that had a RIF field and had this ring number in the first or last entry of the RIF field).
.1.3.6.1.2.1.16.10.6.1.15,TOKEN-RING-RMON-MIB::sourceRoutingStats2HopsFrames,Counter32,read-only,,mandatory,,The total number of frames received whose route had 2 hops, were not All Route Broadcast Frames, and whose source or destination were on this ring (i.e. frames that had a RIF field and had this ring number in the first or last entry of the RIF field).
.1.3.6.1.2.1.16.10.6.1.16,TOKEN-RING-RMON-MIB::sourceRoutingStats3HopsFrames,Counter32,read-only,,mandatory,,The total number of frames received whose route had 3 hops, were not All Route Broadcast Frames, and whose source or destination were on this ring (i.e. frames that had a RIF field and had this ring number in the first or last entry of the RIF field).
.1.3.6.1.2.1.16.10.6.1.17,TOKEN-RING-RMON-MIB::sourceRoutingStats4HopsFrames,Counter32,read-only,,mandatory,,The total number of frames received whose route had 4 hops, were not All Route Broadcast Frames, and whose source or destination were on this ring (i.e. frames that had a RIF field and had this ring number in the first or last entry of the RIF field).
.1.3.6.1.2.1.16.10.6.1.18,TOKEN-RING-RMON-MIB::sourceRoutingStats5HopsFrames,Counter32,read-only,,mandatory,,The total number of frames received whose route had 5 hops, were not All Route Broadcast Frames, and whose source or destination were on this ring (i.e. frames that had a RIF field and had this ring number in the first or last entry of the RIF field).
.1.3.6.1.2.1.16.10.6.1.19,TOKEN-RING-RMON-MIB::sourceRoutingStats6HopsFrames,Counter32,read-only,,mandatory,,The total number of frames received whose route had 6 hops, were not All Route Broadcast Frames, and whose source or destination were on this ring (i.e. frames that had a RIF field and had this ring number in the first or last entry of the RIF field).
.1.3.6.1.2.1.16.10.6.1.20,TOKEN-RING-RMON-MIB::sourceRoutingStats7HopsFrames,Counter32,read-only,,mandatory,,The total number of frames received whose route had 7 hops, were not All Route Broadcast Frames, and whose source or destination were on this ring (i.e. frames that had a RIF field and had this ring number in the first or last entry of the RIF field).
.1.3.6.1.2.1.16.10.6.1.21,TOKEN-RING-RMON-MIB::sourceRoutingStats8HopsFrames,Counter32,read-only,,mandatory,,The total number of frames received whose route had 8 hops, were not All Route Broadcast Frames, and whose source or destination were on this ring (i.e. frames that had a RIF field and had this ring number in the first or last entry of the RIF field).
.1.3.6.1.2.1.16.10.6.1.22,TOKEN-RING-RMON-MIB::sourceRoutingStatsMoreThan8HopsFrames,Counter32,read-only,,mandatory,,The total number of frames received whose route had more than 8 hops, were not All Route Broadcast Frames, and whose source or destination were on this ring (i.e. frames that had a RIF field and had this ring number in the first or last entry of the RIF field).
.1.3.6.1.2.1.16.10.6.1.23,TOKEN-RING-RMON-MIB::sourceRoutingStatsOwner,OCTET,read-write,,mandatory,,The entity that configured this entry and is therefore using the resources assigned to it.
.1.3.6.1.2.1.16.10.6.1.24,TOKEN-RING-RMON-MIB::sourceRoutingStatsStatus,INTEGER,read-write,,mandatory,valid(1):createRequest(2):underCreation(3):invalid(4),The status of this sourceRoutingStats entry.
.1.3.6.1.2.1.16.10.7,RMON2-MIB::ringStationControl2Table,,not-accessible,,deprecated,,Contains the RMON-2 augmentations to RMON-1. This table has been deprecated, as it has not had enough independent implementations to demonstrate interoperability to meet the requirements of a Draft Standard.
.1.3.6.1.2.1.16.10.7.1,RMON2-MIB::ringStationControl2Entry,,not-accessible,,deprecated,,Contains the RMON-2 augmentations to RMON-1.
.1.3.6.1.2.1.16.10.7.1.1,RMON2-MIB::ringStationControlDroppedFrames,Counter32,read-only,,deprecated,,The total number of frames that were received by the probe and therefore not accounted for in the *StatsDropEvents, but that the probe chose not to count for this entry for whatever reason. Most often, this event occurs when the probe is out of some resources and decides to shed load from this collection. This count does not include packets that were not counted because they had MAC-layer errors. Note that, unlike the dropEvents counter, this number is the exact number of frames dropped.
.1.3.6.1.2.1.16.10.7.1.2,RMON2-MIB::ringStationControlCreateTime,TimeTicks,read-only,,deprecated,,The value of sysUpTime when this control entry was last activated. This can be used by the management station to ensure that the table has not been deleted and recreated between polls.
.1.3.6.1.2.1.16.10.8,RMON2-MIB::sourceRoutingStats2Table,,not-accessible,,deprecated,,Contains the RMON-2 augmentations to RMON-1. This table has been deprecated, as it has not had enough independent implementations to demonstrate interoperability to meet the requirements of a Draft Standard.
.1.3.6.1.2.1.16.10.8.1,RMON2-MIB::sourceRoutingStats2Entry,,not-accessible,,deprecated,,Contains the RMON-2 augmentations to RMON-1.
.1.3.6.1.2.1.16.10.8.1.1,RMON2-MIB::sourceRoutingStatsDroppedFrames,Counter32,read-only,,deprecated,,The total number of frames that were received by the probe and therefore not accounted for in the *StatsDropEvents, but that the probe chose not to count for this entry for whatever reason. Most often, this event occurs when the probe is out of some resources and decides to shed load from this collection. This count does not include packets that were not counted because they had MAC-layer errors. Note that, unlike the dropEvents counter, this number is the exact number of frames dropped.
.1.3.6.1.2.1.16.10.8.1.2,RMON2-MIB::sourceRoutingStatsCreateTime,TimeTicks,read-only,,deprecated,,The value of sysUpTime when this control entry was last activated. This can be used by the management station to ensure that the table has not been deleted and recreated between polls.
.1.3.6.1.2.1.16.11,RMON2-MIB::protocolDir,,,,,,
.1.3.6.1.2.1.16.11.1,RMON2-MIB::protocolDirLastChange,TimeTicks,read-only,,current,,The value of sysUpTime at the time the protocol directory was last modified, either through insertions or deletions, or through modifications of the protocolDirAddressMapConfig, protocolDirHostConfig, or protocolDirMatrixConfig.
.1.3.6.1.2.1.16.11.2,RMON2-MIB::protocolDirTable,,not-accessible,,current,,This table lists the protocols that this agent has the capability to decode and count. There is one entry in this table for each such protocol. These protocols represent different network-layer, transport-layer, and higher-layer protocols. The agent should boot up with this table preconfigured with those protocols that it knows about and wishes to monitor. Implementations are strongly encouraged to support protocols higher than the network layer (at least for the protocol distribution group), even for implementations that don't support the application-layer groups.
.1.3.6.1.2.1.16.11.2.1,RMON2-MIB::protocolDirEntry,,not-accessible,protocolDirID:protocolDirParameters,current,,A conceptual row in the protocolDirTable. An example of the indexing of this entry is protocolDirLocalIndex.8.0.0.0.1.0.0.8.0.2.0.0, which is the encoding of a length of 8, followed by 8 subids encoding the protocolDirID of 1.2048, followed by a length of 2 and the 2 subids encoding zero-valued parameters. Note that some combinations of index values may result in an index that exceeds 128 sub-identifiers in length, which exceeds the maximum for the SNMP protocol. Implementations should take care to avoid such combinations.
.1.3.6.1.2.1.16.11.2.1.1,RMON2-MIB::protocolDirID,OCTET,not-accessible,,current,,A unique identifier for a particular protocol. Standard identifiers will be defined in such a manner that they can often be used as specifications for new protocols - i.e., a tree-structured assignment mechanism that matches the protocol encapsulation 'tree' and that has algorithmic assignment mechanisms for certain subtrees. See RFC 2074 for more details. Despite the algorithmic mechanism, the probe will only place entries in here for those protocols it chooses to collect. In other words, it need not populate this table with all possible ethernet protocol types, nor need it create them on the fly when it sees them. Whether it does these things is a matter of product definition (cost/benefit, usability) and is up to the designer of the product. If an entry is written to this table with a protocolDirID that the agent doesn't understand, either directly or algorithmically, the SET request will be rejected with an inconsistentName or badValue (for SNMPv1) error.
.1.3.6.1.2.1.16.11.2.1.2,RMON2-MIB::protocolDirParameters,OCTET,not-accessible,,current,,A set of parameters for the associated protocolDirID. See the associated RMON2 Protocol Identifiers document for a description of the possible parameters. There will be one octet in this string for each sub-identifier in the protocolDirID, and the parameters will appear here in the same order as the associated sub-identifiers appear in the protocolDirID. Every node in the protocolDirID tree has a different, optional set of parameters defined (that is, the definition of parameters for a node is optional). The proper parameter value for each node is included in this string. Note that the inclusion of a parameter value in this string for each node is not optional. What is optional is that a node may have no parameters defined, in which case the parameter field for that node will be zero.
.1.3.6.1.2.1.16.11.2.1.3,RMON2-MIB::protocolDirLocalIndex,Integer32,read-only,,current,,The locally arbitrary but unique identifier associated with this protocolDir entry. The value for each supported protocol must remain constant at least from one re-initialization of the entity's network management system to the next re-initialization, except that if a protocol is deleted and re-created, it must be re-created with a new value that has not been used since the last re-initialization. The specific value is meaningful only within a given SNMP entity. A protocolDirLocalIndex must not be re-used until the next agent restart in the event that the protocol directory entry is deleted.
.1.3.6.1.2.1.16.11.2.1.4,RMON2-MIB::protocolDirDescr,OCTET,read-create,,current,,A textual description of the protocol encapsulation. A probe may choose to describe only a subset of the entire encapsulation (e.g., only the highest layer). This object is intended for human consumption only. This object may not be modified if the associated protocolDirStatus object is equal to active(1).
.1.3.6.1.2.1.16.11.2.1.5,RMON2-MIB::protocolDirType,BITS,read-only,,current,extensible(0):addressRecognitionCapable(1),This object describes 2 attributes of this protocol directory entry. The presence or absence of the 'extensible' bit describes whether this protocol directory entry can be extended by the user by creating protocol directory entries that are children of this protocol. An example of an entry that will often allow extensibility is 'ip.udp'. The probe may automatically populate some children of this node, such as 'ip.udp.snmp' and 'ip.udp.dns'. A probe administrator or user may also populate additional children via remote SNMP requests that create entries in this table. When a child node is added for a protocol for which the probe has no built-in support extending a parent node (for which the probe does have built-in support), that child node is not extendable. This is termed 'limited extensibility'. When a child node is added through this extensibility mechanism, the values of protocolDirLocalIndex and protocolDirType shall be assigned by the agent. The other objects in the entry will be assigned by the manager who is creating the new entry. This object also describes whether this agent can recognize addresses for this protocol, should it be a network-level protocol. That is, while a probe may be able to recognize packets of a particular network-layer protocol and count them, it takes additional logic to be able to recognize the addresses in this protocol and to populate network-layer or application-layer tables with the addresses in this protocol. If this bit is set, the agent will recognize network-layer addresses for this protocol and populate the network- and application-layer host and matrix tables with these protocols. Note that when an entry is created, the agent will supply values for the bits that match the capabilities of the agent with respect to this protocol. Note that since row creations usually exercise the limited extensibility feature, these bits will usually be set to zero.
.1.3.6.1.2.1.16.11.2.1.6,RMON2-MIB::protocolDirAddressMapConfig,INTEGER,read-create,,current,notSupported(1):supportedOff(2):supportedOn(3),This object describes and configures the probe's support for address mapping for this protocol. When the probe creates entries in this table for all protocols that it understands, it will set the entry to notSupported(1) if it doesn't have the capability to perform address mapping for the protocol or if this protocol is not a network-layer protocol. When an entry is created in this table by a management operation as part of the limited extensibility feature, the probe must set this value to notSupported(1), because limited extensibility of the protocolDirTable does not extend to interpreting addresses of the extended protocols. If the value of this object is notSupported(1), the probe will not perform address mapping for this protocol and shall not allow this object to be changed to any other value. If the value of this object is supportedOn(3), the probe supports address mapping for this protocol and is configured to perform address mapping for this protocol for all addressMappingControlEntries and all interfaces. If the value of this object is supportedOff(2), the probe supports address mapping for this protocol but is configured to not perform address mapping for this protocol for any addressMappingControlEntries and all interfaces. Whenever this value changes from supportedOn(3) to supportedOff(2), the probe shall delete all related entries in the addressMappingTable.
.1.3.6.1.2.1.16.11.2.1.7,RMON2-MIB::protocolDirHostConfig,INTEGER,read-create,,current,notSupported(1):supportedOff(2):supportedOn(3),This object describes and configures the probe's support for the network-layer and application-layer host tables for this protocol. When the probe creates entries in this table for all protocols that it understands, it will set the entry to notSupported(1) if it doesn't have the capability to track the nlHostTable for this protocol or if the alHostTable is implemented but doesn't have the capability to track this protocol. Note that if the alHostTable is implemented, the probe may only support a protocol if it is supported in both the nlHostTable and the alHostTable. If the associated protocolDirType object has the addressRecognitionCapable bit set, then this is a network- layer protocol for which the probe recognizes addresses, and thus the probe will populate the nlHostTable and alHostTable with addresses it discovers for this protocol. If the value of this object is notSupported(1), the probe will not track the nlHostTable or alHostTable for this protocol and shall not allow this object to be changed to any other value. If the value of this object is supportedOn(3), the probe supports tracking of the nlHostTable and alHostTable for this protocol and is configured to track both tables for this protocol for all control entries and all interfaces. If the value of this object is supportedOff(2), the probe supports tracking of the nlHostTable and alHostTable for this protocol but is configured to not track these tables for any control entries or interfaces. Whenever this value changes from supportedOn(3) to supportedOff(2), the probe shall delete all related entries in the nlHostTable and alHostTable. Note that since each alHostEntry references 2 protocol directory entries, one for the network address and one for the type of the highest protocol recognized, an entry will only be created in that table if this value is supportedOn(3) for both protocols.
.1.3.6.1.2.1.16.11.2.1.8,RMON2-MIB::protocolDirMatrixConfig,INTEGER,read-create,,current,notSupported(1):supportedOff(2):supportedOn(3),This object describes and configures the probe's support for the network-layer and application-layer matrix tables for this protocol. When the probe creates entries in this table for all protocols that it understands, it will set the entry to notSupported(1) if it doesn't have the capability to track the nlMatrixTables for this protocol or if the alMatrixTables are implemented but don't have the capability to track this protocol. Note that if the alMatrix tables are implemented, the probe may only support a protocol if it is supported in both of the nlMatrixTables and both of the alMatrixTables. If the associated protocolDirType object has the addressRecognitionCapable bit set, then this is a network- layer protocol for which the probe recognizes addresses, and thus the probe will populate both of the nlMatrixTables and both of the alMatrixTables with addresses it discovers for this protocol. If the value of this object is notSupported(1), the probe will not track either of the nlMatrixTables or the alMatrixTables for this protocol and shall not allow this object to be changed to any other value. If the value of this object is supportedOn(3), the probe supports tracking of both of the nlMatrixTables and (if implemented) both of the alMatrixTables for this protocol and is configured to track these tables for this protocol for all control entries and all interfaces. If the value of this object is supportedOff(2), the probe supports tracking of both of the nlMatrixTables and (if implemented) both of the alMatrixTables for this protocol but is configured to not track these tables for this protocol for any control entries or interfaces. Whenever this value changes from supportedOn(3) to supportedOff(2), the probe shall delete all related entries in the nlMatrixTables and the alMatrixTables. Note that since each alMatrixEntry references 2 protocol directory entries, one for the network address and one for the type of the highest protocol recognized, an entry will only be created in that table if this value is supportedOn(3) for both protocols.
.1.3.6.1.2.1.16.11.2.1.9,RMON2-MIB::protocolDirOwner,OCTET,read-create,,current,,The entity that configured this entry and is therefore using the resources assigned to it.
.1.3.6.1.2.1.16.11.2.1.10,RMON2-MIB::protocolDirStatus,INTEGER,read-create,,current,active(1):notInService(2):notReady(3):createAndGo(4):createAndWait(5):destroy(6),The status of this protocol directory entry. An entry may not exist in the active state unless all objects in the entry have an appropriate value. If this object is not equal to active(1), all associated entries in the nlHostTable, nlMatrixSDTable, nlMatrixDSTable, alHostTable, alMatrixSDTable, and alMatrixDSTable shall be deleted.
.1.3.6.1.2.1.16.12,RMON2-MIB::protocolDist,,,,,,
.1.3.6.1.2.1.16.12.1,RMON2-MIB::protocolDistControlTable,,not-accessible,,current,,Controls the setup of protocol type distribution statistics tables. Implementations are encouraged to add an entry per monitored interface upon initialization so that a default collection of protocol statistics is available. Rationale: This table controls collection of very basic statistics for any or all of the protocols detected on a given interface. An NMS can use this table to quickly determine bandwidth allocation utilized by different protocols. A media-specific statistics collection could also be configured (e.g., etherStats, trPStats) to easily obtain total frame, octet, and droppedEvents for the same interface.
.1.3.6.1.2.1.16.12.1.1,RMON2-MIB::protocolDistControlEntry,,not-accessible,protocolDistControlIndex,current,,A conceptual row in the protocolDistControlTable. An example of the indexing of this entry is protocolDistControlDroppedFrames.7
.1.3.6.1.2.1.16.12.1.1.1,RMON2-MIB::protocolDistControlIndex,Integer32,not-accessible,,current,,A unique index for this protocolDistControlEntry.
.1.3.6.1.2.1.16.12.1.1.2,RMON2-MIB::protocolDistControlDataSource,OBJECT,read-create,,current,,The source of data for the this protocol distribution. The statistics in this group reflect all packets on the local network segment attached to the identified interface. This object may not be modified if the associated protocolDistControlStatus object is equal to active(1).
.1.3.6.1.2.1.16.12.1.1.3,RMON2-MIB::protocolDistControlDroppedFrames,Counter32,read-only,,current,,The total number of frames that were received by the probe and therefore not accounted for in the *StatsDropEvents, but that the probe chose not to count for this entry for whatever reason. Most often, this event occurs when the probe is out of some resources and decides to shed load from this collection. This count does not include packets that were not counted because they had MAC-layer errors. Note that, unlike the dropEvents counter, this number is the exact number of frames dropped.
.1.3.6.1.2.1.16.12.1.1.4,RMON2-MIB::protocolDistControlCreateTime,TimeTicks,read-only,,current,,The value of sysUpTime when this control entry was last activated. This can be used by the management station to ensure that the table has not been deleted and recreated between polls.
.1.3.6.1.2.1.16.12.1.1.5,RMON2-MIB::protocolDistControlOwner,OCTET,read-create,,current,,The entity that configured this entry and is therefore using the resources assigned to it.
.1.3.6.1.2.1.16.12.1.1.6,RMON2-MIB::protocolDistControlStatus,INTEGER,read-create,,current,active(1):notInService(2):notReady(3):createAndGo(4):createAndWait(5):destroy(6),The status of this row. An entry may not exist in the active state unless all objects in the entry have an appropriate value. If this object is not equal to active(1), all associated entries in the protocolDistStatsTable shall be deleted.
.1.3.6.1.2.1.16.12.2,RMON2-MIB::protocolDistStatsTable,,not-accessible,,current,,An entry is made in this table for every protocol in the protocolDirTable that has been seen in at least one packet. Counters are updated in this table for every protocol type that is encountered when parsing a packet, but no counters are updated for packets with MAC-layer errors. Note that if a protocolDirEntry is deleted, all associated entries in this table are removed.
.1.3.6.1.2.1.16.12.2.1,RMON2-MIB::protocolDistStatsEntry,,not-accessible,protocolDistControlIndex:protocolDirLocalIndex,current,,A conceptual row in the protocolDistStatsTable. The index is composed of the protocolDistControlIndex of the associated protocolDistControlEntry, followed by the protocolDirLocalIndex of the associated protocol that this entry represents. In other words, the index identifies the protocol distribution an entry is a part of and the particular protocol that it represents. An example of the indexing of this entry is protocolDistStatsPkts.1.18
.1.3.6.1.2.1.16.12.2.1.1,RMON2-MIB::protocolDistStatsPkts,Gauge32,read-only,,current,,The number of packets of this protocol type received without errors. Note that this is the number of link-layer packets, so if a single network-layer packet is fragmented into several link-layer frames, this counter is incremented several times.
.1.3.6.1.2.1.16.12.2.1.2,RMON2-MIB::protocolDistStatsOctets,Gauge32,read-only,,current,,The number of octets in packets of this protocol type received since it was added to the protocolDistStatsTable (excluding framing bits, but including FCS octets), except for those octets in packets that contained errors. Note that this doesn't count just those octets in the particular protocol frames but includes the entire packet that contained the protocol.
.1.3.6.1.2.1.16.13,RMON2-MIB::addressMap,,,,,,
.1.3.6.1.2.1.16.13.1,RMON2-MIB::addressMapInserts,Counter32,read-only,,current,,The number of times an address mapping entry has been inserted into the addressMapTable. If an entry is inserted, then deleted, and then inserted, this counter will be incremented by 2. Note that the table size can be determined by subtracting addressMapDeletes from addressMapInserts.
.1.3.6.1.2.1.16.13.2,RMON2-MIB::addressMapDeletes,Counter32,read-only,,current,,The number of times an address mapping entry has been deleted from the addressMapTable (for any reason). If an entry is deleted, then inserted, and then deleted, this counter will be incremented by 2. Note that the table size can be determined by subtracting addressMapDeletes from addressMapInserts.
.1.3.6.1.2.1.16.13.3,RMON2-MIB::addressMapMaxDesiredEntries,Integer32,read-write,,current,,The maximum number of entries that are desired in the addressMapTable. The probe will not create more than this number of entries in the table but may choose to create fewer entries in this table for any reason, including the lack of resources. If this object is set to a value less than the current number of entries, enough entries are chosen in an implementation-dependent manner and deleted so that the number of entries in the table equals the value of this object. If this value is set to -1, the probe may create any number of entries in this table. This object may be used to control how resources are allocated on the probe for the various RMON functions.
.1.3.6.1.2.1.16.13.4,RMON2-MIB::addressMapControlTable,,not-accessible,,current,,A table to control the collection of mappings from network layer address to physical address to interface. Note that this is not like the typical RMON controlTable and dataTable in which each entry creates its own data table. Each entry in this table enables the discovery of addresses on a new interface and the placement of address mappings into the central addressMapTable. Implementations are encouraged to add an entry per monitored interface upon initialization so that a default collection of address mappings is available.
.1.3.6.1.2.1.16.13.4.1,RMON2-MIB::addressMapControlEntry,,not-accessible,addressMapControlIndex,current,,A conceptual row in the addressMapControlTable. An example of the indexing of this entry is addressMapControlDroppedFrames.1
.1.3.6.1.2.1.16.13.4.1.1,RMON2-MIB::addressMapControlIndex,Integer32,not-accessible,,current,,A unique index for this entry in the addressMapControlTable.
.1.3.6.1.2.1.16.13.4.1.2,RMON2-MIB::addressMapControlDataSource,OBJECT,read-create,,current,,The source of data for this addressMapControlEntry.
.1.3.6.1.2.1.16.13.4.1.3,RMON2-MIB::addressMapControlDroppedFrames,Counter32,read-only,,current,,The total number of frames that were received by the probe and therefore not accounted for in the *StatsDropEvents, but that the probe chose not to count for this entry for whatever reason. Most often, this event occurs when the probe is out of some resources and decides to shed load from this collection. This count does not include packets that were not counted because they had MAC-layer errors. Note that, unlike the dropEvents counter, this number is the exact number of frames dropped.
.1.3.6.1.2.1.16.13.4.1.4,RMON2-MIB::addressMapControlOwner,OCTET,read-create,,current,,The entity that configured this entry and is therefore using the resources assigned to it.
.1.3.6.1.2.1.16.13.4.1.5,RMON2-MIB::addressMapControlStatus,INTEGER,read-create,,current,active(1):notInService(2):notReady(3):createAndGo(4):createAndWait(5):destroy(6),The status of this addressMap control entry. An entry may not exist in the active state unless all objects in the entry have an appropriate value. If this object is not equal to active(1), all associated entries in the addressMapTable shall be deleted.
.1.3.6.1.2.1.16.13.5,RMON2-MIB::addressMapTable,,not-accessible,,current,,A table of mappings from network layer address to physical address to interface. The probe will add entries to this table based on the source MAC and network addresses seen in packets without MAC-level errors. The probe will populate this table for all protocols in the protocol directory table whose value of protocolDirAddressMapConfig is equal to supportedOn(3), and will delete any entries whose protocolDirEntry is deleted or has a protocolDirAddressMapConfig value of supportedOff(2).
.1.3.6.1.2.1.16.13.5.1,RMON2-MIB::addressMapEntry,,not-accessible,addressMapTimeMark:protocolDirLocalIndex:addressMapNetworkAddress:addressMapSource,current,,A conceptual row in the addressMapTable. The protocolDirLocalIndex in the index identifies the network layer protocol of the addressMapNetworkAddress. An example of the indexing of this entry is addressMapSource.783495.18.4.128.2.6.6.11.1.3.6.1.2.1.2.2.1.1.1. Note that some combinations of index values may result in an index that exceeds 128 sub-identifiers in length, which exceeds the maximum for the SNMP protocol. Implementations should take care to avoid such combinations.
.1.3.6.1.2.1.16.13.5.1.1,RMON2-MIB::addressMapTimeMark,TimeTicks,not-accessible,,current,,A TimeFilter for this entry. See the TimeFilter textual convention to see how this works.
.1.3.6.1.2.1.16.13.5.1.2,RMON2-MIB::addressMapNetworkAddress,OCTET,not-accessible,,current,,The network address for this relation. This is represented as an octet string with specific semantics and length as identified by the protocolDirLocalIndex component of the index. For example, if the protocolDirLocalIndex indicates an encapsulation of ip, this object is encoded as a length octet of 4, followed by the 4 octets of the IP address, in network byte order.
.1.3.6.1.2.1.16.13.5.1.3,RMON2-MIB::addressMapSource,OBJECT,not-accessible,,current,,The interface or port on which the associated network address was most recently seen. If this address mapping was discovered on an interface, this object shall identify the instance of the ifIndex object, defined in [RFC2863], for the desired interface. For example, if an entry were to receive data from interface #1, this object would be set to ifIndex.1. If this address mapping was discovered on a port, this object shall identify the instance of the rptrGroupPortIndex object, defined in [RFC2108], for the desired port. For example, if an entry were to receive data from group #1, port #1, this object would be set to rptrGroupPortIndex.1.1. Note that while the dataSource associated with this entry may only point to index objects, this object may at times point to repeater port objects. This situation occurs when the dataSource points to an interface that is a locally attached repeater and the agent has additional information about the source port of traffic seen on that repeater.
.1.3.6.1.2.1.16.13.5.1.4,RMON2-MIB::addressMapPhysicalAddress,OCTET,read-only,,current,,The last source physical address on which the associated network address was seen. If the protocol of the associated network address was encapsulated inside of a network-level or higher protocol, this will be the address of the next-lower protocol with the addressRecognitionCapable bit enabled and will be formatted as specified for that protocol.
.1.3.6.1.2.1.16.13.5.1.5,RMON2-MIB::addressMapLastChange,TimeTicks,read-only,,current,,The value of sysUpTime at the time this entry was last created or the values of the physical address changed. This can be used to help detect duplicate address problems, in which case this object will be updated frequently.
.1.3.6.1.2.1.16.14,RMON2-MIB::nlHost,,,,,,
.1.3.6.1.2.1.16.14.1,RMON2-MIB::hlHostControlTable,,not-accessible,,current,,A list of higher-layer (i.e., non-MAC) host table control entries. These entries will enable the collection of the network- and application-level host tables indexed by network addresses. Both the network- and application-level host tables are controlled by this table so that they will both be created and deleted at the same time, further increasing the ease with which they can be implemented as a single datastore. (Note that if an implementation stores application-layer host records in memory, it can derive network-layer host records from them.) Entries in the nlHostTable will be created on behalf of each entry in this table. Additionally, if this probe implements the alHostTable, entries in the alHostTable will be created on behalf of each entry in this table. Implementations are encouraged to add an entry per monitored interface upon initialization so that a default collection of host statistics is available.
.1.3.6.1.2.1.16.14.1.1,RMON2-MIB::hlHostControlEntry,,not-accessible,hlHostControlIndex,current,,A conceptual row in the hlHostControlTable. An example of the indexing of this entry is hlHostControlNlDroppedFrames.1
.1.3.6.1.2.1.16.14.1.1.1,RMON2-MIB::hlHostControlIndex,Integer32,not-accessible,,current,,An index that uniquely identifies an entry in the hlHostControlTable. Each such entry defines a function that discovers hosts on a particular interface and places statistics about them in the nlHostTable, and optionally in the alHostTable, on behalf of this hlHostControlEntry.
.1.3.6.1.2.1.16.14.1.1.2,RMON2-MIB::hlHostControlDataSource,OBJECT,read-create,,current,,The source of data for the associated host tables. The statistics in this group reflect all packets on the local network segment attached to the identified interface. This object may not be modified if the associated hlHostControlStatus object is equal to active(1).
.1.3.6.1.2.1.16.14.1.1.3,RMON2-MIB::hlHostControlNlDroppedFrames,Counter32,read-only,,current,,The total number of frames that were received by the probe and therefore not accounted for in the *StatsDropEvents, but that the probe chose not to count for the associated nlHost entries for whatever reason. Most often, this event occurs when the probe is out of some resources and decides to shed load from this collection. This count does not include packets that were not counted because they had MAC-layer errors. Note that if the nlHostTable is inactive because no protocols are enabled in the protocol directory, this value should be 0. Note that, unlike the dropEvents counter, this number is the exact number of frames dropped.
.1.3.6.1.2.1.16.14.1.1.4,RMON2-MIB::hlHostControlNlInserts,Counter32,read-only,,current,,The number of times an nlHost entry has been inserted into the nlHost table. If an entry is inserted, then deleted, and then inserted, this counter will be incremented by 2. To allow for efficient implementation strategies, agents may delay updating this object for short periods of time. For example, an implementation strategy may allow internal data structures to differ from those visible via SNMP for short periods of time. This counter may reflect the internal data structures for those short periods of time. Note that the table size can be determined by subtracting hlHostControlNlDeletes from hlHostControlNlInserts.
.1.3.6.1.2.1.16.14.1.1.5,RMON2-MIB::hlHostControlNlDeletes,Counter32,read-only,,current,,The number of times an nlHost entry has been deleted from the nlHost table (for any reason). If an entry is deleted, then inserted, and then deleted, this counter will be incremented by 2. To allow for efficient implementation strategies, agents may delay updating this object for short periods of time. For example, an implementation strategy may allow internal data structures to differ from those visible via SNMP for short periods of time. This counter may reflect the internal data structures for those short periods of time. Note that the table size can be determined by subtracting hlHostControlNlDeletes from hlHostControlNlInserts.
.1.3.6.1.2.1.16.14.1.1.6,RMON2-MIB::hlHostControlNlMaxDesiredEntries,Integer32,read-create,,current,,The maximum number of entries that are desired in the nlHostTable on behalf of this control entry. The probe will not create more than this number of associated entries in the table but may choose to create fewer entries in this table for any reason, including the lack of resources. If this object is set to a value less than the current number of entries, enough entries are chosen in an implementation-dependent manner and deleted so that the number of entries in the table equals the value of this object. If this value is set to -1, the probe may create any number of entries in this table. If the associated hlHostControlStatus object is equal to 'active', this object may not be modified. This object may be used to control how resources are allocated on the probe for the various RMON functions.
.1.3.6.1.2.1.16.14.1.1.7,RMON2-MIB::hlHostControlAlDroppedFrames,Counter32,read-only,,current,,The total number of frames that were received by the probe and therefore not accounted for in the *StatsDropEvents, but that the probe chose not to count for the associated alHost entries for whatever reason. Most often, this event occurs when the probe is out of some resources and decides to shed load from this collection. This count does not include packets that were not counted because they had MAC-layer errors. Note that if the alHostTable is not implemented or is inactive because no protocols are enabled in the protocol directory, this value should be 0. Note that, unlike the dropEvents counter, this number is the exact number of frames dropped.
.1.3.6.1.2.1.16.14.1.1.8,RMON2-MIB::hlHostControlAlInserts,Counter32,read-only,,current,,The number of times an alHost entry has been inserted into the alHost table. If an entry is inserted, then deleted, and then inserted, this counter will be incremented by 2. To allow for efficient implementation strategies, agents may delay updating this object for short periods of time. For example, an implementation strategy may allow internal data structures to differ from those visible via SNMP for short periods of time. This counter may reflect the internal data structures for those short periods of time. Note that the table size can be determined by subtracting hlHostControlAlDeletes from hlHostControlAlInserts.
.1.3.6.1.2.1.16.14.1.1.9,RMON2-MIB::hlHostControlAlDeletes,Counter32,read-only,,current,,The number of times an alHost entry has been deleted from the alHost table (for any reason). If an entry is deleted, then inserted, and then deleted, this counter will be incremented by 2. To allow for efficient implementation strategies, agents may delay updating this object for short periods of time. For example, an implementation strategy may allow internal data structures to differ from those visible via SNMP for short periods of time. This counter may reflect the internal data structures for those short periods of time. Note that the table size can be determined by subtracting hlHostControlAlDeletes from hlHostControlAlInserts.
.1.3.6.1.2.1.16.14.1.1.10,RMON2-MIB::hlHostControlAlMaxDesiredEntries,Integer32,read-create,,current,,The maximum number of entries that are desired in the alHost table on behalf of this control entry. The probe will not create more than this number of associated entries in the table but may choose to create fewer entries in this table for any reason, including the lack of resources. If this object is set to a value less than the current number of entries, enough entries are chosen in an implementation-dependent manner and deleted so that the number of entries in the table equals the value of this object. If this value is set to -1, the probe may create any number of entries in this table. If the associated hlHostControlStatus object is equal to 'active', this object may not be modified. This object may be used to control how resources are allocated on the probe for the various RMON functions.
.1.3.6.1.2.1.16.14.1.1.11,RMON2-MIB::hlHostControlOwner,OCTET,read-create,,current,,The entity that configured this entry and is therefore using the resources assigned to it.
.1.3.6.1.2.1.16.14.1.1.12,RMON2-MIB::hlHostControlStatus,INTEGER,read-create,,current,active(1):notInService(2):notReady(3):createAndGo(4):createAndWait(5):destroy(6),The status of this hlHostControlEntry. An entry may not exist in the active state unless all objects in the entry have an appropriate value. If this object is not equal to active(1), all associated entries in the nlHostTable and alHostTable shall be deleted.
.1.3.6.1.2.1.16.14.2,RMON2-MIB::nlHostTable,,not-accessible,,current,,A collection of statistics for a particular network layer address that has been discovered on an interface of this device. The probe will populate this table for all network layer protocols in the protocol directory table whose value of protocolDirHostConfig is equal to supportedOn(3), and will delete any entries whose protocolDirEntry is deleted or has a protocolDirHostConfig value of supportedOff(2). The probe will add to this table all addresses seen as the source or destination address in all packets with no MAC errors, and will increment octet and packet counts in the table for all packets with no MAC errors.
.1.3.6.1.2.1.16.14.2.1,RMON2-MIB::nlHostEntry,,not-accessible,hlHostControlIndex:nlHostTimeMark:protocolDirLocalIndex:nlHostAddress,current,,A conceptual row in the nlHostTable. The hlHostControlIndex value in the index identifies the hlHostControlEntry on whose behalf this entry was created. The protocolDirLocalIndex value in the index identifies the network layer protocol of the nlHostAddress. An example of the indexing of this entry is nlHostOutPkts.1.783495.18.4.128.2.6.6. Note that some combinations of index values may result in an index that exceeds 128 sub-identifiers in length, which exceeds the maximum for the SNMP protocol. Implementations should take care to avoid such combinations.
.1.3.6.1.2.1.16.14.2.1.1,RMON2-MIB::nlHostTimeMark,TimeTicks,not-accessible,,current,,A TimeFilter for this entry. See the TimeFilter textual convention to see how this works.
.1.3.6.1.2.1.16.14.2.1.2,RMON2-MIB::nlHostAddress,OCTET,not-accessible,,current,,The network address for this nlHostEntry. This is represented as an octet string with specific semantics and length as identified by the protocolDirLocalIndex component of the index. For example, if the protocolDirLocalIndex indicates an encapsulation of IP, this object is encoded as a length octet of 4, followed by the 4 octets of the IP address, in network byte order.
.1.3.6.1.2.1.16.14.2.1.3,RMON2-MIB::nlHostInPkts,Gauge32,read-only,,current,,The number of packets without errors transmitted to this address since it was added to the nlHostTable. Note that this is the number of link-layer packets, so if a single network-layer packet is fragmented into several link-layer frames, this counter is incremented several times.
.1.3.6.1.2.1.16.14.2.1.4,RMON2-MIB::nlHostOutPkts,Gauge32,read-only,,current,,The number of packets without errors transmitted by this address since it was added to the nlHostTable. Note that this is the number of link-layer packets, so if a single network-layer packet is fragmented into several link-layer frames, this counter is incremented several times.
.1.3.6.1.2.1.16.14.2.1.5,RMON2-MIB::nlHostInOctets,Gauge32,read-only,,current,,The number of octets transmitted to this address since it was added to the nlHostTable (excluding framing bits, but including FCS octets), excluding octets in packets that contained errors. Note that this doesn't count just those octets in the particular protocol frames but includes the entire packet that contained the protocol.
.1.3.6.1.2.1.16.14.2.1.6,RMON2-MIB::nlHostOutOctets,Gauge32,read-only,,current,,The number of octets transmitted by this address since it was added to the nlHostTable (excluding framing bits, but including FCS octets), excluding octets in packets that contained errors. Note that this doesn't count just those octets in the particular protocol frames but includes the entire packet that contained the protocol.
.1.3.6.1.2.1.16.14.2.1.7,RMON2-MIB::nlHostOutMacNonUnicastPkts,Gauge32,read-only,,current,,The number of packets without errors transmitted by this address that were directed to any MAC broadcast addresses or to any MAC multicast addresses since this host was added to the nlHostTable. Note that this is the number of link-layer packets, so if a single network-layer packet is fragmented into several link-layer frames, this counter is incremented several times.
.1.3.6.1.2.1.16.14.2.1.8,RMON2-MIB::nlHostCreateTime,TimeTicks,read-only,,current,,The value of sysUpTime when this entry was last activated. This can be used by the management station to ensure that the entry has not been deleted and recreated between polls.
.1.3.6.1.2.1.16.15,RMON2-MIB::nlMatrix,,,,,,
.1.3.6.1.2.1.16.15.1,RMON2-MIB::hlMatrixControlTable,,not-accessible,,current,,A list of higher-layer (i.e., non-MAC) matrix control entries. These entries will enable the collection of the network- and application-level matrix tables containing conversation statistics indexed by pairs of network addresses. Both the network- and application-level matrix tables are controlled by this table so that they will both be created and deleted at the same time, further increasing the ease with which they can be implemented as a single datastore. (Note that if an implementation stores application-layer matrix records in memory, it can derive network-layer matrix records from them.) Entries in the nlMatrixSDTable and nlMatrixDSTable will be created on behalf of each entry in this table. Additionally, if this probe implements the alMatrix tables, entries in the alMatrix tables will be created on behalf of each entry in this table.
.1.3.6.1.2.1.16.15.1.1,RMON2-MIB::hlMatrixControlEntry,,not-accessible,hlMatrixControlIndex,current,,A conceptual row in the hlMatrixControlTable. An example of indexing of this entry is hlMatrixControlNlDroppedFrames.1
.1.3.6.1.2.1.16.15.1.1.1,RMON2-MIB::hlMatrixControlIndex,Integer32,not-accessible,,current,,An index that uniquely identifies an entry in the hlMatrixControlTable. Each such entry defines a function that discovers conversations on a particular interface and places statistics about them in the nlMatrixSDTable and the nlMatrixDSTable, and optionally the alMatrixSDTable and alMatrixDSTable, on behalf of this hlMatrixControlEntry.
.1.3.6.1.2.1.16.15.1.1.2,RMON2-MIB::hlMatrixControlDataSource,OBJECT,read-create,,current,,The source of the data for the associated matrix tables. The statistics in this group reflect all packets on the local network segment attached to the identified interface. This object may not be modified if the associated hlMatrixControlStatus object is equal to active(1).
.1.3.6.1.2.1.16.15.1.1.3,RMON2-MIB::hlMatrixControlNlDroppedFrames,Counter32,read-only,,current,,The total number of frames that were received by the probe and therefore not accounted for in the *StatsDropEvents, but that the probe chose not to count for this entry for whatever reason. Most often, this event occurs when the probe is out of some resources and decides to shed load from this collection. This count does not include packets that were not counted because they had MAC-layer errors. Note that if the nlMatrixTables are inactive because no protocols are enabled in the protocol directory, this value should be 0. Note that, unlike the dropEvents counter, this number is the exact number of frames dropped.
.1.3.6.1.2.1.16.15.1.1.4,RMON2-MIB::hlMatrixControlNlInserts,Counter32,read-only,,current,,The number of times an nlMatrix entry has been inserted into the nlMatrix tables. If an entry is inserted, then deleted, and then inserted, this counter will be incremented by 2. The addition of a conversation into both the nlMatrixSDTable and nlMatrixDSTable shall be counted as two insertions (even though every addition into one table must be accompanied by an insertion into the other). To allow for efficient implementation strategies, agents may delay updating this object for short periods of time. For example, an implementation strategy may allow internal data structures to differ from those visible via SNMP for short periods of time. This counter may reflect the internal data structures for those short periods of time. Note that the sum of then nlMatrixSDTable and nlMatrixDSTable sizes can be determined by subtracting hlMatrixControlNlDeletes from hlMatrixControlNlInserts.
.1.3.6.1.2.1.16.15.1.1.5,RMON2-MIB::hlMatrixControlNlDeletes,Counter32,read-only,,current,,The number of times an nlMatrix entry has been deleted from the nlMatrix tables (for any reason). If an entry is deleted, then inserted, and then deleted, this counter will be incremented by 2. The deletion of a conversation from both the nlMatrixSDTable and nlMatrixDSTable shall be counted as two deletions (even though every deletion from one table must be accompanied by a deletion from the other). To allow for efficient implementation strategies, agents may delay updating this object for short periods of time. For example, an implementation strategy may allow internal data structures to differ from those visible via SNMP for short periods of time. This counter may reflect the internal data structures for those short periods of time. Note that the table size can be determined by subtracting hlMatrixControlNlDeletes from hlMatrixControlNlInserts.
.1.3.6.1.2.1.16.15.1.1.6,RMON2-MIB::hlMatrixControlNlMaxDesiredEntries,Integer32,read-create,,current,,The maximum number of entries that are desired in the nlMatrix tables on behalf of this control entry. The probe will not create more than this number of associated entries in the table but may choose to create fewer entries in this table for any reason, including the lack of resources. If this object is set to a value less than the current number of entries, enough entries are chosen in an implementation-dependent manner and deleted so that the number of entries in the table equals the value of this object. If this value is set to -1, the probe may create any number of entries in this table. If the associated hlMatrixControlStatus object is equal to 'active', this object may not be modified. This object may be used to control how resources are allocated on the probe for the various RMON functions.
.1.3.6.1.2.1.16.15.1.1.7,RMON2-MIB::hlMatrixControlAlDroppedFrames,Counter32,read-only,,current,,The total number of frames that were received by the probe and therefore not accounted for in the *StatsDropEvents, but that the probe chose not to count for this entry for whatever reason. Most often, this event occurs when the probe is out of some resources and decides to shed load from this collection. This count does not include packets that were not counted because they had MAC-layer errors. Note that if the alMatrixTables are not implemented or are inactive because no protocols are enabled in the protocol directory, this value should be 0. Note that, unlike the dropEvents counter, this number is the exact number of frames dropped.
.1.3.6.1.2.1.16.15.1.1.8,RMON2-MIB::hlMatrixControlAlInserts,Counter32,read-only,,current,,The number of times an alMatrix entry has been inserted into the alMatrix tables. If an entry is inserted, then deleted, and then inserted, this counter will be incremented by 2. The addition of a conversation into both the alMatrixSDTable and alMatrixDSTable shall be counted as two insertions (even though every addition into one table must be accompanied by an insertion into the other). To allow for efficient implementation strategies, agents may delay updating this object for short periods of time. For example, an implementation strategy may allow internal data structures to differ from those visible via SNMP for short periods of time. This counter may reflect the internal data structures for those short periods of time. Note that the table size can be determined by subtracting hlMatrixControlAlDeletes from hlMatrixControlAlInserts.
.1.3.6.1.2.1.16.15.1.1.9,RMON2-MIB::hlMatrixControlAlDeletes,Counter32,read-only,,current,,The number of times an alMatrix entry has been deleted from the alMatrix tables. If an entry is deleted, then inserted, and then deleted, this counter will be incremented by 2. The deletion of a conversation from both the alMatrixSDTable and alMatrixDSTable shall be counted as two deletions (even though every deletion from one table must be accompanied by a deletion from the other). To allow for efficient implementation strategies, agents may delay updating this object for short periods of time. For example, an implementation strategy may allow internal data structures to differ from those visible via SNMP for short periods of time. This counter may reflect the internal data structures for those short periods of time. Note that the table size can be determined by subtracting hlMatrixControlAlDeletes from hlMatrixControlAlInserts.
.1.3.6.1.2.1.16.15.1.1.10,RMON2-MIB::hlMatrixControlAlMaxDesiredEntries,Integer32,read-create,,current,,The maximum number of entries that are desired in the alMatrix tables on behalf of this control entry. The probe will not create more than this number of associated entries in the table but may choose to create fewer entries in this table for any reason, including the lack of resources. If this object is set to a value less than the current number of entries, enough entries are chosen in an implementation-dependent manner and deleted so that the number of entries in the table equals the value of this object. If this value is set to -1, the probe may create any number of entries in this table. If the associated hlMatrixControlStatus object is equal to 'active', this object may not be modified. This object may be used to control how resources are allocated on the probe for the various RMON functions.
.1.3.6.1.2.1.16.15.1.1.11,RMON2-MIB::hlMatrixControlOwner,OCTET,read-create,,current,,The entity that configured this entry and is therefore using the resources assigned to it.
.1.3.6.1.2.1.16.15.1.1.12,RMON2-MIB::hlMatrixControlStatus,INTEGER,read-create,,current,active(1):notInService(2):notReady(3):createAndGo(4):createAndWait(5):destroy(6),The status of this hlMatrixControlEntry. An entry may not exist in the active state unless all objects in the entry have an appropriate value. If this object is not equal to active(1), all associated entries in the nlMatrixSDTable, nlMatrixDSTable, alMatrixSDTable, and alMatrixDSTable shall be deleted by the agent.
.1.3.6.1.2.1.16.15.2,RMON2-MIB::nlMatrixSDTable,,not-accessible,,current,,A list of traffic matrix entries that collect statistics for conversations between two network-level addresses. This table is indexed first by the source address and then by the destination address to make it convenient to collect all conversations from a particular address. The probe will populate this table for all network layer protocols in the protocol directory table whose value of protocolDirMatrixConfig is equal to supportedOn(3), and will delete any entries whose protocolDirEntry is deleted or has a protocolDirMatrixConfig value of supportedOff(2). The probe will add to this table all pairs of addresses seen in all packets with no MAC errors and will increment octet and packet counts in the table for all packets with no MAC errors. Further, this table will only contain entries that have a corresponding entry in the nlMatrixDSTable with the same source address and destination address.
.1.3.6.1.2.1.16.15.2.1,RMON2-MIB::nlMatrixSDEntry,,not-accessible,hlMatrixControlIndex:nlMatrixSDTimeMark:protocolDirLocalIndex:nlMatrixSDSourceAddress:nlMatrixSDDestAddress,current,,A conceptual row in the nlMatrixSDTable. The hlMatrixControlIndex value in the index identifies the hlMatrixControlEntry on whose behalf this entry was created. The protocolDirLocalIndex value in the index identifies the network-layer protocol of the nlMatrixSDSourceAddress and nlMatrixSDDestAddress. An example of the indexing of this table is nlMatrixSDPkts.1.783495.18.4.128.2.6.6.4.128.2.6.7. Note that some combinations of index values may result in an index that exceeds 128 sub-identifiers in length, which exceeds the maximum for the SNMP protocol. Implementations should take care to avoid such combinations.
.1.3.6.1.2.1.16.15.2.1.1,RMON2-MIB::nlMatrixSDTimeMark,TimeTicks,not-accessible,,current,,A TimeFilter for this entry. See the TimeFilter textual convention to see how this works.
.1.3.6.1.2.1.16.15.2.1.2,RMON2-MIB::nlMatrixSDSourceAddress,OCTET,not-accessible,,current,,The network source address for this nlMatrixSDEntry. This is represented as an octet string with specific semantics and length as identified by the protocolDirLocalIndex component of the index. For example, if the protocolDirLocalIndex indicates an encapsulation of IP, this object is encoded as a length octet of 4, followed by the 4 octets of the IP address, in network byte order.
.1.3.6.1.2.1.16.15.2.1.3,RMON2-MIB::nlMatrixSDDestAddress,OCTET,not-accessible,,current,,The network destination address for this nlMatrixSDEntry. This is represented as an octet string with specific semantics and length as identified by the protocolDirLocalIndex component of the index. For example, if the protocolDirLocalIndex indicates an encapsulation of IP, this object is encoded as a length octet of 4, followed by the 4 octets of the IP address, in network byte order.
.1.3.6.1.2.1.16.15.2.1.4,RMON2-MIB::nlMatrixSDPkts,Gauge32,read-only,,current,,The number of packets without errors transmitted from the source address to the destination address since this entry was added to the nlMatrixSDTable. Note that this is the number of link-layer packets, so if a single network-layer packet is fragmented into several link-layer frames, this counter is incremented several times.
.1.3.6.1.2.1.16.15.2.1.5,RMON2-MIB::nlMatrixSDOctets,Gauge32,read-only,,current,,The number of octets transmitted from the source address to the destination address since this entry was added to the nlMatrixSDTable (excluding framing bits, but including FCS octets), excluding octets in packets that contained errors. Note that this doesn't count just those octets in the particular protocol frames but includes the entire packet that contained the protocol.
.1.3.6.1.2.1.16.15.2.1.6,RMON2-MIB::nlMatrixSDCreateTime,TimeTicks,read-only,,current,,The value of sysUpTime when this entry was last activated. This can be used by the management station to ensure that the entry has not been deleted and recreated between polls.
.1.3.6.1.2.1.16.15.3,RMON2-MIB::nlMatrixDSTable,,not-accessible,,current,,A list of traffic matrix entries that collect statistics for conversations between two network-level addresses. This table is indexed first by the destination address and then by the source address to make it convenient to collect all conversations to a particular address. The probe will populate this table for all network layer protocols in the protocol directory table whose value of protocolDirMatrixConfig is equal to supportedOn(3), and will delete any entries whose protocolDirEntry is deleted or has a protocolDirMatrixConfig value of supportedOff(2). The probe will add to this table all pairs of addresses seen in all packets with no MAC errors and will increment octet and packet counts in the table for all packets with no MAC errors. Further, this table will only contain entries that have a corresponding entry in the nlMatrixSDTable with the same source address and destination address.
.1.3.6.1.2.1.16.15.3.1,RMON2-MIB::nlMatrixDSEntry,,not-accessible,hlMatrixControlIndex:nlMatrixDSTimeMark:protocolDirLocalIndex:nlMatrixDSDestAddress:nlMatrixDSSourceAddress,current,,A conceptual row in the nlMatrixDSTable. The hlMatrixControlIndex value in the index identifies the hlMatrixControlEntry on whose behalf this entry was created. The protocolDirLocalIndex value in the index identifies the network-layer protocol of the nlMatrixDSSourceAddress and nlMatrixDSDestAddress. An example of the indexing of this table is nlMatrixDSPkts.1.783495.18.4.128.2.6.7.4.128.2.6.6. Note that some combinations of index values may result in an index that exceeds 128 sub-identifiers in length, which exceeds the maximum for the SNMP protocol. Implementations should take care to avoid such combinations.
.1.3.6.1.2.1.16.15.3.1.1,RMON2-MIB::nlMatrixDSTimeMark,TimeTicks,not-accessible,,current,,A TimeFilter for this entry. See the TimeFilter textual convention to see how this works.
.1.3.6.1.2.1.16.15.3.1.2,RMON2-MIB::nlMatrixDSSourceAddress,OCTET,not-accessible,,current,,The network source address for this nlMatrixDSEntry. This is represented as an octet string with specific semantics and length as identified by the protocolDirLocalIndex component of the index. For example, if the protocolDirLocalIndex indicates an encapsulation of IP, this object is encoded as a length octet of 4, followed by the 4 octets of the IP address, in network byte order.
.1.3.6.1.2.1.16.15.3.1.3,RMON2-MIB::nlMatrixDSDestAddress,OCTET,not-accessible,,current,,The network destination address for this nlMatrixDSEntry. This is represented as an octet string with specific semantics and length as identified by the protocolDirLocalIndex component of the index. For example, if the protocolDirLocalIndex indicates an encapsulation of IP, this object is encoded as a length octet of 4, followed by the 4 octets of the IP address, in network byte order.
.1.3.6.1.2.1.16.15.3.1.4,RMON2-MIB::nlMatrixDSPkts,Gauge32,read-only,,current,,The number of packets without errors transmitted from the source address to the destination address since this entry was added to the nlMatrixDSTable. Note that this is the number of link-layer packets, so if a single network-layer packet is fragmented into several link-layer frames, this counter is incremented several times.
.1.3.6.1.2.1.16.15.3.1.5,RMON2-MIB::nlMatrixDSOctets,Gauge32,read-only,,current,,The number of octets transmitted from the source address to the destination address since this entry was added to the nlMatrixDSTable (excluding framing bits, but including FCS octets), excluding octets in packets that contained errors. Note that this doesn't count just those octets in the particular protocol frames but includes the entire packet that contained the protocol.
.1.3.6.1.2.1.16.15.3.1.6,RMON2-MIB::nlMatrixDSCreateTime,TimeTicks,read-only,,current,,The value of sysUpTime when this entry was last activated. This can be used by the management station to ensure that the entry has not been deleted and recreated between polls.
.1.3.6.1.2.1.16.15.4,RMON2-MIB::nlMatrixTopNControlTable,,not-accessible,,current,,A set of parameters that control the creation of a report of the top N matrix entries according to a selected metric.
.1.3.6.1.2.1.16.15.4.1,RMON2-MIB::nlMatrixTopNControlEntry,,not-accessible,nlMatrixTopNControlIndex,current,,A conceptual row in the nlMatrixTopNControlTable. An example of the indexing of this table is nlMatrixTopNControlDuration.3
.1.3.6.1.2.1.16.15.4.1.1,RMON2-MIB::nlMatrixTopNControlIndex,Integer32,not-accessible,,current,,An index that uniquely identifies an entry in the nlMatrixTopNControlTable. Each such entry defines one topN report prepared for one interface.
.1.3.6.1.2.1.16.15.4.1.2,RMON2-MIB::nlMatrixTopNControlMatrixIndex,Integer32,read-create,,current,,The nlMatrix[SD/DS] table for which a topN report will be prepared on behalf of this entry. The nlMatrix[SD/DS] table is identified by the value of the hlMatrixControlIndex for that table - that value is used here to identify the particular table. This object may not be modified if the associated nlMatrixTopNControlStatus object is equal to active(1).
.1.3.6.1.2.1.16.15.4.1.3,RMON2-MIB::nlMatrixTopNControlRateBase,INTEGER,read-create,,current,nlMatrixTopNPkts(1):nlMatrixTopNOctets(2):nlMatrixTopNHighCapacityPkts(3):nlMatrixTopNHighCapacityOctets(4),The variable for each nlMatrix[SD/DS] entry that the nlMatrixTopNEntries are sorted by, as well as a control for the table that the results will be reported in. This object may not be modified if the associated nlMatrixTopNControlStatus object is equal to active(1). If this value is less than or equal to 2, when the report is prepared, entries are created in the nlMatrixTopNTable associated with this object. If this value is greater than or equal to 3, when the report is prepared, entries are created in the nlMatrixTopNHighCapacityTable associated with this object.
.1.3.6.1.2.1.16.15.4.1.4,RMON2-MIB::nlMatrixTopNControlTimeRemaining,Integer32,read-create,,current,,The number of seconds left in the report currently being collected. When this object is modified by the management station, a new collection is started, possibly aborting a currently running report. The new value is used as the requested duration of this report and is immediately loaded into the associated nlMatrixTopNControlDuration object. When the report finishes, the probe will automatically start another collection with the same initial value of nlMatrixTopNControlTimeRemaining. Thus, the management station may simply read the resulting reports repeatedly, checking the startTime and duration each time to ensure that a report was not missed or that the report parameters were not changed. While the value of this object is non-zero, it decrements by one per second until it reaches zero. At the time that this object decrements to zero, the report is made accessible in the nlMatrixTopNTable, overwriting any report that may be there. When this object is modified by the management station, any associated entries in the nlMatrixTopNTable shall be deleted. (Note that this is a different algorithm than the one used in the hostTopNTable).
.1.3.6.1.2.1.16.15.4.1.5,RMON2-MIB::nlMatrixTopNControlGeneratedReports,Counter32,read-only,,current,,The number of reports that have been generated by this entry.
.1.3.6.1.2.1.16.15.4.1.6,RMON2-MIB::nlMatrixTopNControlDuration,Integer32,read-only,,current,,The number of seconds that this report has collected during the last sampling interval. When the associated nlMatrixTopNControlTimeRemaining object is set, this object shall be set by the probe to the same value and shall not be modified until the next time the nlMatrixTopNControlTimeRemaining is set. This value shall be zero if no reports have been requested for this nlMatrixTopNControlEntry.
.1.3.6.1.2.1.16.15.4.1.7,RMON2-MIB::nlMatrixTopNControlRequestedSize,Integer32,read-create,,current,,The maximum number of matrix entries requested for this report. When this object is created or modified, the probe should set nlMatrixTopNControlGrantedSize as closely to this object as possible for the particular probe implementation and available resources.
.1.3.6.1.2.1.16.15.4.1.8,RMON2-MIB::nlMatrixTopNControlGrantedSize,Integer32,read-only,,current,,The maximum number of matrix entries in this report. When the associated nlMatrixTopNControlRequestedSize object is created or modified, the probe should set this object as closely to the requested value as possible for the particular implementation and available resources. The probe must not lower this value except as a side-effect of a set to the associated nlMatrixTopNControlRequestedSize object. If the value of nlMatrixTopNControlRateBase is equal to nlMatrixTopNPkts, when the next topN report is generated, matrix entries with the highest value of nlMatrixTopNPktRate shall be placed in this table in decreasing order of this rate until there is no more room or until there are no more matrix entries. If the value of nlMatrixTopNControlRateBase is equal to nlMatrixTopNOctets, when the next topN report is generated, matrix entries with the highest value of nlMatrixTopNOctetRate shall be placed in this table in decreasing order of this rate until there is no more room or until there are no more matrix entries. It is an implementation-specific matter how entries with the same value of nlMatrixTopNPktRate or nlMatrixTopNOctetRate are sorted. It is also an implementation-specific matter as to whether zero-valued entries are available.
.1.3.6.1.2.1.16.15.4.1.9,RMON2-MIB::nlMatrixTopNControlStartTime,TimeTicks,read-only,,current,,The value of sysUpTime when this topN report was last started. In other words, this is the time that the associated nlMatrixTopNControlTimeRemaining object was modified to start the requested report or the time the report was last automatically (re)started. This object may be used by the management station to determine whether a report was missed.
.1.3.6.1.2.1.16.15.4.1.10,RMON2-MIB::nlMatrixTopNControlOwner,OCTET,read-create,,current,,The entity that configured this entry and is therefore using the resources assigned to it.
.1.3.6.1.2.1.16.15.4.1.11,RMON2-MIB::nlMatrixTopNControlStatus,INTEGER,read-create,,current,active(1):notInService(2):notReady(3):createAndGo(4):createAndWait(5):destroy(6),The status of this nlMatrixTopNControlEntry. An entry may not exist in the active state unless all objects in the entry have an appropriate value. If this object is not equal to active(1), all associated entries in the nlMatrixTopNTable shall be deleted by the agent.
.1.3.6.1.2.1.16.15.5,RMON2-MIB::nlMatrixTopNTable,,not-accessible,,current,,A set of statistics for those network-layer matrix entries that have counted the highest number of octets or packets.
.1.3.6.1.2.1.16.15.5.1,RMON2-MIB::nlMatrixTopNEntry,,not-accessible,nlMatrixTopNControlIndex:nlMatrixTopNIndex,current,,A conceptual row in the nlMatrixTopNTable. The nlMatrixTopNControlIndex value in the index identifies the nlMatrixTopNControlEntry on whose behalf this entry was created. An example of the indexing of this table is nlMatrixTopNPktRate.3.10
.1.3.6.1.2.1.16.15.5.1.1,RMON2-MIB::nlMatrixTopNIndex,Integer32,not-accessible,,current,,An index that uniquely identifies an entry in the nlMatrixTopNTable among those in the same report. This index is between 1 and N, where N is the number of entries in this report. If the value of nlMatrixTopNControlRateBase is equal to nlMatrixTopNPkts, increasing values of nlMatrixTopNIndex shall be assigned to entries with decreasing values of nlMatrixTopNPktRate until index N is assigned or there are no more nlMatrixTopNEntries. If the value of nlMatrixTopNControlRateBase is equal to nlMatrixTopNOctets, increasing values of nlMatrixTopNIndex shall be assigned to entries with decreasing values of nlMatrixTopNOctetRate until index N is assigned or there are no more nlMatrixTopNEntries.
.1.3.6.1.2.1.16.15.5.1.2,RMON2-MIB::nlMatrixTopNProtocolDirLocalIndex,Integer32,read-only,,current,,The protocolDirLocalIndex of the network-layer protocol of this entry's network address.
.1.3.6.1.2.1.16.15.5.1.3,RMON2-MIB::nlMatrixTopNSourceAddress,OCTET,read-only,,current,,The network-layer address of the source host in this conversation. This is represented as an octet string with specific semantics and length as identified by the associated nlMatrixTopNProtocolDirLocalIndex. For example, if the protocolDirLocalIndex indicates an encapsulation of IP, this object is encoded as a length octet of 4, followed by the 4 octets of the IP address, in network byte order.
.1.3.6.1.2.1.16.15.5.1.4,RMON2-MIB::nlMatrixTopNDestAddress,OCTET,read-only,,current,,The network-layer address of the destination host in this conversation. This is represented as an octet string with specific semantics and length as identified by the associated nlMatrixTopNProtocolDirLocalIndex. For example, if the nlMatrixTopNProtocolDirLocalIndex indicates an encapsulation of IP, this object is encoded as a length octet of 4, followed by the 4 octets of the IP address, in network byte order.
.1.3.6.1.2.1.16.15.5.1.5,RMON2-MIB::nlMatrixTopNPktRate,Gauge32,read-only,,current,,The number of packets seen from the source host to the destination host during this sampling interval, counted using the rules for counting the nlMatrixSDPkts object. If the value of nlMatrixTopNControlRateBase is nlMatrixTopNPkts, this variable will be used to sort this report.
.1.3.6.1.2.1.16.15.5.1.6,RMON2-MIB::nlMatrixTopNReversePktRate,Gauge32,read-only,,current,,The number of packets seen from the destination host to the source host during this sampling interval, counted using the rules for counting the nlMatrixSDPkts object. (Note that the corresponding nlMatrixSDPkts object selected is the one whose source address is equal to nlMatrixTopNDestAddress and whose destination address is equal to nlMatrixTopNSourceAddress.) Note that if the value of nlMatrixTopNControlRateBase is equal to nlMatrixTopNPkts, the sort of topN entries is based entirely on nlMatrixTopNPktRate, and not on the value of this object.
.1.3.6.1.2.1.16.15.5.1.7,RMON2-MIB::nlMatrixTopNOctetRate,Gauge32,read-only,,current,,The number of octets seen from the source host to the destination host during this sampling interval, counted using the rules for counting the nlMatrixSDOctets object. If the value of nlMatrixTopNControlRateBase is nlMatrixTopNOctets, this variable will be used to sort this report.
.1.3.6.1.2.1.16.15.5.1.8,RMON2-MIB::nlMatrixTopNReverseOctetRate,Gauge32,read-only,,current,,The number of octets seen from the destination host to the source host during this sampling interval, counted using the rules for counting the nlMatrixDSOctets object. (Note that the corresponding nlMatrixSDOctets object selected is the one whose source address is equal to nlMatrixTopNDestAddress and whose destination address is equal to nlMatrixTopNSourceAddress.) Note that if the value of nlMatrixTopNControlRateBase is equal to nlMatrixTopNOctets, the sort of topN entries is based entirely on nlMatrixTopNOctetRate, and not on the value of this object.
.1.3.6.1.2.1.16.16,RMON2-MIB::alHost,,,,,,
.1.3.6.1.2.1.16.16.1,RMON2-MIB::alHostTable,,not-accessible,,current,,A collection of statistics for a particular protocol from a particular network address that has been discovered on an interface of this device. The probe will populate this table for all protocols in the protocol directory table whose value of protocolDirHostConfig is equal to supportedOn(3), and will delete any entries whose protocolDirEntry is deleted or has a protocolDirHostConfig value of supportedOff(2). The probe will add to this table all addresses seen as the source or destination address in all packets with no MAC errors and will increment octet and packet counts in the table for all packets with no MAC errors. Further, entries will only be added to this table if their address exists in the nlHostTable and will be deleted from this table if their address is deleted from the nlHostTable.
.1.3.6.1.2.1.16.16.1.1,RMON2-MIB::alHostEntry,,not-accessible,hlHostControlIndex:alHostTimeMark:protocolDirLocalIndex:nlHostAddress:protocolDirLocalIndex,current,,A conceptual row in the alHostTable. The hlHostControlIndex value in the index identifies the hlHostControlEntry on whose behalf this entry was created. The first protocolDirLocalIndex value in the index identifies the network-layer protocol of the address. The nlHostAddress value in the index identifies the network- layer address of this entry. The second protocolDirLocalIndex value in the index identifies the protocol that is counted by this entry. An example of the indexing in this entry is alHostOutPkts.1.783495.18.4.128.2.6.6.34. Note that some combinations of index values may result in an index that exceeds 128 sub-identifiers in length, which exceeds the maximum for the SNMP protocol. Implementations should take care to avoid such combinations.
.1.3.6.1.2.1.16.16.1.1.1,RMON2-MIB::alHostTimeMark,TimeTicks,not-accessible,,current,,A TimeFilter for this entry. See the TimeFilter textual convention to see how this works.
.1.3.6.1.2.1.16.16.1.1.2,RMON2-MIB::alHostInPkts,Gauge32,read-only,,current,,The number of packets of this protocol type without errors transmitted to this address since it was added to the alHostTable. Note that this is the number of link-layer packets, so if a single network-layer packet is fragmented into several link-layer frames, this counter is incremented several times.
.1.3.6.1.2.1.16.16.1.1.3,RMON2-MIB::alHostOutPkts,Gauge32,read-only,,current,,The number of packets of this protocol type without errors transmitted by this address since it was added to the alHostTable. Note that this is the number of link-layer packets, so if a single network-layer packet is fragmented into several link-layer frames, this counter is incremented several times.
.1.3.6.1.2.1.16.16.1.1.4,RMON2-MIB::alHostInOctets,Gauge32,read-only,,current,,The number of octets transmitted to this address of this protocol type since it was added to the alHostTable (excluding framing bits, but including FCS octets), excluding octets in packets that contained errors. Note that this doesn't count just those octets in the particular protocol frames but includes the entire packet that contained the protocol.
.1.3.6.1.2.1.16.16.1.1.5,RMON2-MIB::alHostOutOctets,Gauge32,read-only,,current,,The number of octets transmitted by this address of this protocol type since it was added to the alHostTable (excluding framing bits, but including FCS octets), excluding octets in packets that contained errors. Note that this doesn't count just those octets in the particular protocol frames but includes the entire packet that contained the protocol.
.1.3.6.1.2.1.16.16.1.1.6,RMON2-MIB::alHostCreateTime,TimeTicks,read-only,,current,,The value of sysUpTime when this entry was last activated. This can be used by the management station to ensure that the entry has not been deleted and recreated between polls.
.1.3.6.1.2.1.16.17,RMON2-MIB::alMatrix,,,,,,
.1.3.6.1.2.1.16.17.1,RMON2-MIB::alMatrixSDTable,,not-accessible,,current,,A list of application traffic matrix entries that collect statistics for conversations of a particular protocol between two network-level addresses. This table is indexed first by the source address and then by the destination address to make it convenient to collect all statistics from a particular address. The probe will populate this table for all protocols in the protocol directory table whose value of protocolDirMatrixConfig is equal to supportedOn(3), and will delete any entries whose protocolDirEntry is deleted or has a protocolDirMatrixConfig value of supportedOff(2). The probe will add to this table all pairs of addresses for all protocols seen in all packets with no MAC errors and will increment octet and packet counts in the table for all packets with no MAC errors. Further, entries will only be added to this table if their address pair exists in the nlMatrixSDTable and will be deleted from this table if the address pair is deleted from the nlMatrixSDTable.
.1.3.6.1.2.1.16.17.1.1,RMON2-MIB::alMatrixSDEntry,,not-accessible,hlMatrixControlIndex:alMatrixSDTimeMark:protocolDirLocalIndex:nlMatrixSDSourceAddress:nlMatrixSDDestAddress:protocolDirLocalIndex,current,,A conceptual row in the alMatrixSDTable. The hlMatrixControlIndex value in the index identifies the hlMatrixControlEntry on whose behalf this entry was created. The first protocolDirLocalIndex value in the index identifies the network-layer protocol of the nlMatrixSDSourceAddress and nlMatrixSDDestAddress. The nlMatrixSDSourceAddress value in the index identifies the network-layer address of the source host in this conversation. The nlMatrixSDDestAddress value in the index identifies the network-layer address of the destination host in this conversation. The second protocolDirLocalIndex value in the index identifies the protocol that is counted by this entry. An example of the indexing of this entry is alMatrixSDPkts.1.783495.18.4.128.2.6.6.4.128.2.6.7.34. Note that some combinations of index values may result in an index that exceeds 128 sub-identifiers in length, which exceeds the maximum for the SNMP protocol. Implementations should take care to avoid such combinations.
.1.3.6.1.2.1.16.17.1.1.1,RMON2-MIB::alMatrixSDTimeMark,TimeTicks,not-accessible,,current,,A TimeFilter for this entry. See the TimeFilter textual convention to see how this works.
.1.3.6.1.2.1.16.17.1.1.2,RMON2-MIB::alMatrixSDPkts,Gauge32,read-only,,current,,The number of packets of this protocol type without errors transmitted from the source address to the destination address since this entry was added to the alMatrixSDTable. Note that this is the number of link-layer packets, so if a single network-layer packet is fragmented into several link-layer frames, this counter is incremented several times.
.1.3.6.1.2.1.16.17.1.1.3,RMON2-MIB::alMatrixSDOctets,Gauge32,read-only,,current,,The number of octets in packets of this protocol type transmitted from the source address to the destination address since this entry was added to the alMatrixSDTable (excluding framing bits, but including FCS octets), excluding octets in packets that contained errors. Note that this doesn't count just those octets in the particular protocol frames but includes the entire packet that contained the protocol.
.1.3.6.1.2.1.16.17.1.1.4,RMON2-MIB::alMatrixSDCreateTime,TimeTicks,read-only,,current,,The value of sysUpTime when this entry was last activated. This can be used by the management station to ensure that the entry has not been deleted and recreated between polls.
.1.3.6.1.2.1.16.17.2,RMON2-MIB::alMatrixDSTable,,not-accessible,,current,,A list of application traffic matrix entries that collect statistics for conversations of a particular protocol between two network-level addresses. This table is indexed first by the destination address and then by the source address to make it convenient to collect all statistics to a particular address. The probe will populate this table for all protocols in the protocol directory table whose value of protocolDirMatrixConfig is equal to supportedOn(3), and will delete any entries whose protocolDirEntry is deleted or has a protocolDirMatrixConfig value of supportedOff(2). The probe will add to this table all pairs of addresses for all protocols seen in all packets with no MAC errors and will increment octet and packet counts in the table for all packets with no MAC errors. Further, entries will only be added to this table if their address pair exists in the nlMatrixDSTable and will be deleted from this table if the address pair is deleted from the nlMatrixDSTable.
.1.3.6.1.2.1.16.17.2.1,RMON2-MIB::alMatrixDSEntry,,not-accessible,hlMatrixControlIndex:alMatrixDSTimeMark:protocolDirLocalIndex:nlMatrixDSDestAddress:nlMatrixDSSourceAddress:protocolDirLocalIndex,current,,A conceptual row in the alMatrixDSTable. The hlMatrixControlIndex value in the index identifies the hlMatrixControlEntry on whose behalf this entry was created. The first protocolDirLocalIndex value in the index identifies the network-layer protocol of the alMatrixDSSourceAddress and alMatrixDSDestAddress. The nlMatrixDSDestAddress value in the index identifies the network-layer address of the destination host in this conversation. The nlMatrixDSSourceAddress value in the index identifies the network-layer address of the source host in this conversation. The second protocolDirLocalIndex value in the index identifies the protocol that is counted by this entry. An example of the indexing of this entry is alMatrixDSPkts.1.783495.18.4.128.2.6.7.4.128.2.6.6.34. Note that some combinations of index values may result in an index that exceeds 128 sub-identifiers in length, which exceeds the maximum for the SNMP protocol. Implementations should take care to avoid such combinations.
.1.3.6.1.2.1.16.17.2.1.1,RMON2-MIB::alMatrixDSTimeMark,TimeTicks,not-accessible,,current,,A TimeFilter for this entry. See the TimeFilter textual convention to see how this works.
.1.3.6.1.2.1.16.17.2.1.2,RMON2-MIB::alMatrixDSPkts,Gauge32,read-only,,current,,The number of packets of this protocol type without errors transmitted from the source address to the destination address since this entry was added to the alMatrixDSTable. Note that this is the number of link-layer packets, so if a single network-layer packet is fragmented into several link-layer frames, this counter is incremented several times.
.1.3.6.1.2.1.16.17.2.1.3,RMON2-MIB::alMatrixDSOctets,Gauge32,read-only,,current,,The number of octets in packets of this protocol type transmitted from the source address to the destination address since this entry was added to the alMatrixDSTable (excluding framing bits, but including FCS octets), excluding octets in packets that contained errors. Note that this doesn't count just those octets in the particular protocol frames but includes the entire packet that contained the protocol.
.1.3.6.1.2.1.16.17.2.1.4,RMON2-MIB::alMatrixDSCreateTime,TimeTicks,read-only,,current,,The value of sysUpTime when this entry was last activated. This can be used by the management station to ensure that the entry has not been deleted and recreated between polls.
.1.3.6.1.2.1.16.17.3,RMON2-MIB::alMatrixTopNControlTable,,not-accessible,,current,,A set of parameters that control the creation of a report of the top N matrix entries according to a selected metric.
.1.3.6.1.2.1.16.17.3.1,RMON2-MIB::alMatrixTopNControlEntry,,not-accessible,alMatrixTopNControlIndex,current,,A conceptual row in the alMatrixTopNControlTable. An example of the indexing of this table is alMatrixTopNControlDuration.3
.1.3.6.1.2.1.16.17.3.1.1,RMON2-MIB::alMatrixTopNControlIndex,Integer32,not-accessible,,current,,An index that uniquely identifies an entry in the alMatrixTopNControlTable. Each such entry defines one topN report prepared for one interface.
.1.3.6.1.2.1.16.17.3.1.2,RMON2-MIB::alMatrixTopNControlMatrixIndex,Integer32,read-create,,current,,The alMatrix[SD/DS] table for which a topN report will be prepared on behalf of this entry. The alMatrix[SD/DS] table is identified by the value of the hlMatrixControlIndex for that table - that value is used here to identify the particular table. This object may not be modified if the associated alMatrixTopNControlStatus object is equal to active(1).
.1.3.6.1.2.1.16.17.3.1.3,RMON2-MIB::alMatrixTopNControlRateBase,INTEGER,read-create,,current,alMatrixTopNTerminalsPkts(1):alMatrixTopNTerminalsOctets(2):alMatrixTopNAllPkts(3):alMatrixTopNAllOctets(4):alMatrixTopNTerminalsHighCapacityPkts(5):alMatrixTopNTerminalsHighCapacityOctets(6):alMatrixTopNAllHighCapacityPkts(7):alMatrixTopNAllHighCapacityOctets(8),This object controls which alMatrix[SD/DS] entry that the alMatrixTopNEntries are sorted by, which view of the matrix table that will be used, as well as which table the results will be reported in. The values alMatrixTopNTerminalsPkts, alMatrixTopNTerminalsOctets, alMatrixTopNTerminalsHighCapacityPkts, and alMatrixTopNTerminalsHighCapacityOctets cause collection only from protocols that have no child protocols that are counted. The values alMatrixTopNAllPkts, alMatrixTopNAllOctets, alMatrixTopNAllHighCapacityPkts, and alMatrixTopNAllHighCapacityOctets cause collection from all alMatrix entries. This object may not be modified if the associated alMatrixTopNControlStatus object is equal to active(1).
.1.3.6.1.2.1.16.17.3.1.4,RMON2-MIB::alMatrixTopNControlTimeRemaining,Integer32,read-create,,current,,The number of seconds left in the report currently being collected. When this object is modified by the management station, a new collection is started, possibly aborting a currently running report. The new value is used as the requested duration of this report and is immediately loaded into the associated alMatrixTopNControlDuration object. When the report finishes, the probe will automatically start another collection with the same initial value of alMatrixTopNControlTimeRemaining. Thus, the management station may simply read the resulting reports repeatedly, checking the startTime and duration each time to ensure that a report was not missed or that the report parameters were not changed. While the value of this object is non-zero, it decrements by one per second until it reaches zero. At the time that this object decrements to zero, the report is made accessible in the alMatrixTopNTable, overwriting any report that may be there. When this object is modified by the management station, any associated entries in the alMatrixTopNTable shall be deleted. (Note that this is a different algorithm than the one used in the hostTopNTable).
.1.3.6.1.2.1.16.17.3.1.5,RMON2-MIB::alMatrixTopNControlGeneratedReports,Counter32,read-only,,current,,The number of reports that have been generated by this entry.
.1.3.6.1.2.1.16.17.3.1.6,RMON2-MIB::alMatrixTopNControlDuration,Integer32,read-only,,current,,The number of seconds that this report has collected during the last sampling interval. When the associated alMatrixTopNControlTimeRemaining object is set, this object shall be set by the probe to the same value and shall not be modified until the next time the alMatrixTopNControlTimeRemaining is set. This value shall be zero if no reports have been requested for this alMatrixTopNControlEntry.
.1.3.6.1.2.1.16.17.3.1.7,RMON2-MIB::alMatrixTopNControlRequestedSize,Integer32,read-create,,current,,The maximum number of matrix entries requested for this report. When this object is created or modified, the probe should set alMatrixTopNControlGrantedSize as closely to this object as possible for the particular probe implementation and available resources.
.1.3.6.1.2.1.16.17.3.1.8,RMON2-MIB::alMatrixTopNControlGrantedSize,Integer32,read-only,,current,,The maximum number of matrix entries in this report. When the associated alMatrixTopNControlRequestedSize object is created or modified, the probe should set this object as closely to the requested value as possible for the particular implementation and available resources. The probe must not lower this value except as a side-effect of a set to the associated alMatrixTopNControlRequestedSize object. If the value of alMatrixTopNControlRateBase is equal to alMatrixTopNTerminalsPkts or alMatrixTopNAllPkts, when the next topN report is generated, matrix entries with the highest value of alMatrixTopNPktRate shall be placed in this table in decreasing order of this rate until there is no more room or until there are no more matrix entries. If the value of alMatrixTopNControlRateBase is equal to alMatrixTopNTerminalsOctets or alMatrixTopNAllOctets, when the next topN report is generated, matrix entries with the highest value of alMatrixTopNOctetRate shall be placed in this table in decreasing order of this rate until there is no more room or until there are no more matrix entries. It is an implementation-specific matter how entries with the same value of alMatrixTopNPktRate or alMatrixTopNOctetRate are sorted. It is also an implementation-specific matter as to whether zero-valued entries are available.
.1.3.6.1.2.1.16.17.3.1.9,RMON2-MIB::alMatrixTopNControlStartTime,TimeTicks,read-only,,current,,The value of sysUpTime when this topN report was last started. In other words, this is the time that the associated alMatrixTopNControlTimeRemaining object was modified to start the requested report or the time the report was last automatically (re)started. This object may be used by the management station to determine whether a report was missed.
.1.3.6.1.2.1.16.17.3.1.10,RMON2-MIB::alMatrixTopNControlOwner,OCTET,read-create,,current,,The entity that configured this entry and is therefore using the resources assigned to it.
.1.3.6.1.2.1.16.17.3.1.11,RMON2-MIB::alMatrixTopNControlStatus,INTEGER,read-create,,current,active(1):notInService(2):notReady(3):createAndGo(4):createAndWait(5):destroy(6),The status of this alMatrixTopNControlEntry. An entry may not exist in the active state unless all objects in the entry have an appropriate value. If this object is not equal to active(1), all associated entries in the alMatrixTopNTable shall be deleted by the agent.
.1.3.6.1.2.1.16.17.4,RMON2-MIB::alMatrixTopNTable,,not-accessible,,current,,A set of statistics for those application-layer matrix entries that have counted the highest number of octets or packets.
.1.3.6.1.2.1.16.17.4.1,RMON2-MIB::alMatrixTopNEntry,,not-accessible,alMatrixTopNControlIndex:alMatrixTopNIndex,current,,A conceptual row in the alMatrixTopNTable. The alMatrixTopNControlIndex value in the index identifies the alMatrixTopNControlEntry on whose behalf this entry was created. An example of the indexing of this table is alMatrixTopNPktRate.3.10
.1.3.6.1.2.1.16.17.4.1.1,RMON2-MIB::alMatrixTopNIndex,Integer32,not-accessible,,current,,An index that uniquely identifies an entry in the alMatrixTopNTable among those in the same report. This index is between 1 and N, where N is the number of entries in this report. If the value of alMatrixTopNControlRateBase is equal to alMatrixTopNTerminalsPkts or alMatrixTopNAllPkts, increasing values of alMatrixTopNIndex shall be assigned to entries with decreasing values of alMatrixTopNPktRate until index N is assigned or there are no more alMatrixTopNEntries. If the value of alMatrixTopNControlRateBase is equal to alMatrixTopNTerminalsOctets or alMatrixTopNAllOctets, increasing values of alMatrixTopNIndex shall be assigned to entries with decreasing values of alMatrixTopNOctetRate until index N is assigned or there are no more alMatrixTopNEntries.
.1.3.6.1.2.1.16.17.4.1.2,RMON2-MIB::alMatrixTopNProtocolDirLocalIndex,Integer32,read-only,,current,,The protocolDirLocalIndex of the network-layer protocol of this entry's network address.
.1.3.6.1.2.1.16.17.4.1.3,RMON2-MIB::alMatrixTopNSourceAddress,OCTET,read-only,,current,,The network-layer address of the source host in this conversation. This is represented as an octet string with specific semantics and length as identified by the associated alMatrixTopNProtocolDirLocalIndex. For example, if the alMatrixTopNProtocolDirLocalIndex indicates an encapsulation of IP, this object is encoded as a length octet of 4, followed by the 4 octets of the IP address, in network byte order.
.1.3.6.1.2.1.16.17.4.1.4,RMON2-MIB::alMatrixTopNDestAddress,OCTET,read-only,,current,,The network-layer address of the destination host in this conversation. This is represented as an octet string with specific semantics and length as identified by the associated alMatrixTopNProtocolDirLocalIndex. For example, if the alMatrixTopNProtocolDirLocalIndex indicates an encapsulation of IP, this object is encoded as a length octet of 4, followed by the 4 octets of the IP address, in network byte order.
.1.3.6.1.2.1.16.17.4.1.5,RMON2-MIB::alMatrixTopNAppProtocolDirLocalIndex,Integer32,read-only,,current,,The type of the protocol counted by this matrix entry.
.1.3.6.1.2.1.16.17.4.1.6,RMON2-MIB::alMatrixTopNPktRate,Gauge32,read-only,,current,,The number of packets seen of this protocol from the source host to the destination host during this sampling interval, counted using the rules for counting the alMatrixSDPkts object. If the value of alMatrixTopNControlRateBase is alMatrixTopNTerminalsPkts or alMatrixTopNAllPkts, this variable will be used to sort this report.
.1.3.6.1.2.1.16.17.4.1.7,RMON2-MIB::alMatrixTopNReversePktRate,Gauge32,read-only,,current,,The number of packets seen of this protocol from the destination host to the source host during this sampling interval, counted using the rules for counting the alMatrixDSPkts object. (Note that the corresponding alMatrixSDPkts object selected is the one whose source address is equal to alMatrixTopNDestAddress and whose destination address is equal to alMatrixTopNSourceAddress.) Note that if the value of alMatrixTopNControlRateBase is equal to alMatrixTopNTerminalsPkts or alMatrixTopNAllPkts, the sort of topN entries is based entirely on alMatrixTopNPktRate, and not on the value of this object.
.1.3.6.1.2.1.16.17.4.1.8,RMON2-MIB::alMatrixTopNOctetRate,Gauge32,read-only,,current,,The number of octets seen of this protocol from the source host to the destination host during this sampling interval, counted using the rules for counting the alMatrixSDOctets object. If the value of alMatrixTopNControlRateBase is alMatrixTopNTerminalsOctets or alMatrixTopNAllOctets, this variable will be used to sort this report.
.1.3.6.1.2.1.16.17.4.1.9,RMON2-MIB::alMatrixTopNReverseOctetRate,Gauge32,read-only,,current,,The number of octets seen of this protocol from the destination host to the source host during this sampling interval, counted using the rules for counting the alMatrixDSOctets object. (Note that the corresponding alMatrixSDOctets object selected is the one whose source address is equal to alMatrixTopNDestAddress and whose destination address is equal to alMatrixTopNSourceAddress.) Note that if the value of alMatrixTopNControlRateBase is equal to alMatrixTopNTerminalsOctets or alMatrixTopNAllOctets, the sort of topN entries is based entirely on alMatrixTopNOctetRate, and not on the value of this object.
.1.3.6.1.2.1.16.18,RMON2-MIB::usrHistory,,,,,,
.1.3.6.1.2.1.16.18.1,RMON2-MIB::usrHistoryControlTable,,not-accessible,,current,,A list of data-collection configuration entries.
.1.3.6.1.2.1.16.18.1.1,RMON2-MIB::usrHistoryControlEntry,,not-accessible,usrHistoryControlIndex,current,,A list of parameters that set up a group of user-defined MIB objects to be sampled periodically (called a bucket-group). For example, an instance of usrHistoryControlInterval might be named usrHistoryControlInterval.1
.1.3.6.1.2.1.16.18.1.1.1,RMON2-MIB::usrHistoryControlIndex,Integer32,not-accessible,,current,,An index that uniquely identifies an entry in the usrHistoryControlTable. Each such entry defines a set of samples at a particular interval for a specified set of MIB instances available from the managed system.
.1.3.6.1.2.1.16.18.1.1.2,RMON2-MIB::usrHistoryControlObjects,Integer32,read-create,,current,,The number of MIB objects to be collected in the portion of usrHistoryTable associated with this usrHistoryControlEntry. This object may not be modified if the associated instance of usrHistoryControlStatus is equal to active(1).
.1.3.6.1.2.1.16.18.1.1.3,RMON2-MIB::usrHistoryControlBucketsRequested,Integer32,read-create,,current,,The requested number of discrete time intervals over which data is to be saved in the part of the usrHistoryTable associated with this usrHistoryControlEntry. When this object is created or modified, the probe should set usrHistoryControlBucketsGranted as closely to this object as possible for the particular probe implementation and available resources.
.1.3.6.1.2.1.16.18.1.1.4,RMON2-MIB::usrHistoryControlBucketsGranted,Integer32,read-only,,current,,The number of discrete sampling intervals over which data shall be saved in the part of the usrHistoryTable associated with this usrHistoryControlEntry. When the associated usrHistoryControlBucketsRequested object is created or modified, the probe should set this object as closely to the requested value as possible for the particular probe implementation and available resources. The probe must not lower this value except as a result of a modification to the associated usrHistoryControlBucketsRequested object. The associated usrHistoryControlBucketsRequested object should be set before or at the same time as this object to allow the probe to accurately estimate the resources required for this usrHistoryControlEntry. There will be times when the actual number of buckets associated with this entry is less than the value of this object. In this case, at the end of each sampling interval, a new bucket will be added to the usrHistoryTable. When the number of buckets reaches the value of this object and a new bucket is to be added to the usrHistoryTable, the oldest bucket associated with this usrHistoryControlEntry shall be deleted by the agent so that the new bucket can be added. When the value of this object changes to a value less than the current value, entries are deleted from the usrHistoryTable associated with this usrHistoryControlEntry. Enough of the oldest of these entries shall be deleted by the agent so that their number remains less than or equal to the new value of this object. When the value of this object changes to a value greater than the current value, the number of associated usrHistory entries may be allowed to grow.
.1.3.6.1.2.1.16.18.1.1.5,RMON2-MIB::usrHistoryControlInterval,Integer32,read-create,,current,,The interval in seconds over which the data is sampled for each bucket in the part of the usrHistory table associated with this usrHistoryControlEntry. Because the counters in a bucket may overflow at their maximum value with no indication, a prudent manager will take into account the possibility of overflow in any of the associated counters. It is important to consider the minimum time in which any counter could overflow on a particular media type and to set the usrHistoryControlInterval object to a value less than this interval. This object may not be modified if the associated usrHistoryControlStatus object is equal to active(1).
.1.3.6.1.2.1.16.18.1.1.6,RMON2-MIB::usrHistoryControlOwner,OCTET,read-create,,current,,The entity that configured this entry and is therefore using the resources assigned to it.
.1.3.6.1.2.1.16.18.1.1.7,RMON2-MIB::usrHistoryControlStatus,INTEGER,read-create,,current,active(1):notInService(2):notReady(3):createAndGo(4):createAndWait(5):destroy(6),The status of this variable history control entry. An entry may not exist in the active state unless all objects in the entry have an appropriate value. If this object is not equal to active(1), all associated entries in the usrHistoryTable shall be deleted.
.1.3.6.1.2.1.16.18.2,RMON2-MIB::usrHistoryObjectTable,,not-accessible,,current,,A list of data-collection configuration entries.
.1.3.6.1.2.1.16.18.2.1,RMON2-MIB::usrHistoryObjectEntry,,not-accessible,usrHistoryControlIndex:usrHistoryObjectIndex,current,,A list of MIB instances to be sampled periodically. Entries in this table are created when an associated usrHistoryControlObjects object is created. The usrHistoryControlIndex value in the index is that of the associated usrHistoryControlEntry. For example, an instance of usrHistoryObjectVariable might be usrHistoryObjectVariable.1.3
.1.3.6.1.2.1.16.18.2.1.1,RMON2-MIB::usrHistoryObjectIndex,Integer32,not-accessible,,current,,An index used to uniquely identify an entry in the usrHistoryObject table. Each such entry defines a MIB instance to be collected periodically.
.1.3.6.1.2.1.16.18.2.1.2,RMON2-MIB::usrHistoryObjectVariable,OBJECT,read-create,,current,,The object identifier of the particular variable to be sampled. Only variables that resolve to an ASN.1 primitive type of Integer32 (Integer32, Counter, Gauge, or TimeTicks) may be sampled. Because SNMP access control is articulated entirely in terms of the contents of MIB views, no access control mechanism exists that can restrict the value of this object to identify only those objects that exist in a particular MIB view. Because there is thus no acceptable means of restricting the read access that could be obtained through the user history mechanism, the probe must only grant write access to this object in those views that have read access to all objects on the probe. See USM [RFC3414] and VACM [RFC3415] for more information. During a set operation, if the supplied variable name is not available in the selected MIB view, a badValue error must be returned. This object may not be modified if the associated usrHistoryControlStatus object is equal to active(1).
.1.3.6.1.2.1.16.18.2.1.3,RMON2-MIB::usrHistoryObjectSampleType,INTEGER,read-create,,current,absoluteValue(1):deltaValue(2),The method of sampling the selected variable for storage in the usrHistoryTable. If the value of this object is absoluteValue(1), the value of the selected variable will be copied directly into the history bucket. If the value of this object is deltaValue(2), the value of the selected variable at the last sample will be subtracted from the current value, and the difference will be stored in the history bucket. If the associated usrHistoryObjectVariable instance could not be obtained at the previous sample interval, then a delta sample is not possible, and the value of the associated usrHistoryValStatus object for this interval will be valueNotAvailable(1). This object may not be modified if the associated usrHistoryControlStatus object is equal to active(1).
.1.3.6.1.2.1.16.18.3,RMON2-MIB::usrHistoryTable,,not-accessible,,current,,A list of user-defined history entries.
.1.3.6.1.2.1.16.18.3.1,RMON2-MIB::usrHistoryEntry,,not-accessible,usrHistoryControlIndex:usrHistorySampleIndex:usrHistoryObjectIndex,current,,A historical sample of user-defined variables. This sample is associated with the usrHistoryControlEntry that set up the parameters for a regular collection of these samples. The usrHistoryControlIndex value in the index identifies the usrHistoryControlEntry on whose behalf this entry was created. The usrHistoryObjectIndex value in the index identifies the usrHistoryObjectEntry on whose behalf this entry was created. For example, an instance of usrHistoryAbsValue, which represents the 14th sample of a variable collected as specified by usrHistoryControlEntry.1 and usrHistoryObjectEntry.1.5, would be named usrHistoryAbsValue.1.14.5
.1.3.6.1.2.1.16.18.3.1.1,RMON2-MIB::usrHistorySampleIndex,Integer32,not-accessible,,current,,An index that uniquely identifies the particular sample this entry represents among all samples associated with the same usrHistoryControlEntry. This index starts at 1 and increases by one as each new sample is taken.
.1.3.6.1.2.1.16.18.3.1.2,RMON2-MIB::usrHistoryIntervalStart,TimeTicks,read-only,,current,,The value of sysUpTime at the start of the interval over which this sample was measured. If the probe keeps track of the time of day, it should start the first sample of the history at a time such that when the next hour of the day begins, a sample is started at that instant. Note that following this rule may require that the probe delay collecting the first sample of the history, as each sample must be of the same interval. Also note that the sample that is currently being collected is not accessible in this table until the end of its interval.
.1.3.6.1.2.1.16.18.3.1.3,RMON2-MIB::usrHistoryIntervalEnd,TimeTicks,read-only,,current,,The value of sysUpTime at the end of the interval over which this sample was measured.
.1.3.6.1.2.1.16.18.3.1.4,RMON2-MIB::usrHistoryAbsValue,Gauge32,read-only,,current,,The absolute value (i.e., unsigned value) of the user-specified statistic during the last sampling period. The value during the current sampling period is not made available until the period is completed. To obtain the true value for this sampling interval, the associated instance of usrHistoryValStatus must be checked, and usrHistoryAbsValue adjusted as necessary. If the MIB instance could not be accessed during the sampling interval, then this object will have a value of zero, and the associated instance of usrHistoryValStatus will be set to 'valueNotAvailable(1)'. The access control check prescribed in the definition of usrHistoryObjectVariable SHOULD be checked for each sampling interval. If this check determines that access should not be allowed, then this object will have a value of zero, and the associated instance of usrHistoryValStatus will be set to 'valueNotAvailable(1)'.
.1.3.6.1.2.1.16.18.3.1.5,RMON2-MIB::usrHistoryValStatus,INTEGER,read-only,,current,valueNotAvailable(1):valuePositive(2):valueNegative(3),This object indicates the validity and sign of the data in the associated instance of usrHistoryAbsValue. If the MIB instance could not be accessed during the sampling interval, then 'valueNotAvailable(1)' will be returned. If the sample is valid and the actual value of the sample is greater than or equal to zero, then 'valuePositive(2)' is returned. If the sample is valid and the actual value of the sample is less than zero, 'valueNegative(3)' will be returned. The associated instance of usrHistoryAbsValue should be multiplied by -1 to obtain the true sample value.
.1.3.6.1.2.1.16.19,RMON2-MIB::probeConfig,,,,,,
.1.3.6.1.2.1.16.19.1,RMON2-MIB::probeCapabilities,BITS,read-only,,current,etherStats(0):historyControl(1):etherHistory(2):alarm(3):hosts(4):hostTopN(5):matrix(6):filter(7):capture(8):event(9):tokenRingMLStats(10):tokenRingPStats(11):tokenRingMLHistory(12):tokenRingPHistory(13):ringStation(14):ringStationOrder(15):ringStationConfig(16):sourceRouting(17):protocolDirectory(18):protocolDistribution(19):addressMapping(20):nlHost(21):nlMatrix(22):alHost(23):alMatrix(24):usrHistory(25):probeConfig(26),An indication of the RMON MIB groups supported on at least one interface by this probe.
.1.3.6.1.2.1.16.19.2,RMON2-MIB::probeSoftwareRev,OCTET,read-only,,current,,The software revision of this device. This string will have a zero length if the revision is unknown.
.1.3.6.1.2.1.16.19.3,RMON2-MIB::probeHardwareRev,OCTET,read-only,,current,,The hardware revision of this device. This string will have a zero length if the revision is unknown.
.1.3.6.1.2.1.16.19.4,RMON2-MIB::probeDateTime,OCTET,read-write,,current,,Probe's current date and time. field octets contents range ----- ------ -------- ----- 1 1-2 year 0..65536 2 3 month 1..12 3 4 day 1..31 4 5 hour 0..23 5 6 minutes 0..59 6 7 seconds 0..60 (use 60 for leap-second) 7 8 deci-seconds 0..9 8 9 direction from UTC '+' / '-' 9 10 hours from UTC 0..11 10 11 minutes from UTC 0..59 For example, Tuesday May 26, 1992 at 1:30:15 PM EDT would be displayed as: 1992-5-26,13:30:15.0,-4:0 Note that if only local time is known, then time zone information (fields 8-10) is not present, and that if no time information is known, the null string is returned.
.1.3.6.1.2.1.16.19.5,RMON2-MIB::probeResetControl,INTEGER,read-write,,current,running(1):warmBoot(2):coldBoot(3),Setting this object to warmBoot(2) causes the device to restart the application software with current configuration parameters saved in non-volatile memory. Setting this object to coldBoot(3) causes the device to reinitialize configuration parameters in non-volatile memory to default values and to restart the application software. When the device is running normally, this variable has a value of running(1).
.1.3.6.1.2.1.16.19.6,RMON2-MIB::probeDownloadFile,OCTET,read-write,,deprecated,,The file name to be downloaded from the TFTP server when a download is next requested via this MIB. This value is set to the zero-length string when no file name has been specified. This object has been deprecated, as it has not had enough independent implementations to demonstrate interoperability to meet the requirements of a Draft Standard.
.1.3.6.1.2.1.16.19.7,RMON2-MIB::probeDownloadTFTPServer,IpAddress,read-write,,deprecated,,The IP address of the TFTP server that contains the boot image to load when a download is next requested via this MIB. This value is set to '0.0.0.0' when no IP address has been specified. This object has been deprecated, as it has not had enough independent implementations to demonstrate interoperability to meet the requirements of a Draft Standard.
.1.3.6.1.2.1.16.19.8,RMON2-MIB::probeDownloadAction,INTEGER,read-write,,deprecated,notDownloading(1):downloadToPROM(2):downloadToRAM(3),When this object is set to downloadToRAM(3) or downloadToPROM(2), the device will discontinue its normal operation and begin download of the image specified by probeDownloadFile from the server specified by probeDownloadTFTPServer using the TFTP protocol. If downloadToRAM(3) is specified, the new image is copied to RAM only (the old image remains unaltered in the flash EPROM). If downloadToPROM(2) is specified, the new image is written to the flash EPROM memory after its checksum has been verified to be correct. When the download process is completed, the device will warm boot to restart the newly loaded application. When the device is not downloading, this object will have a value of notDownloading(1). This object has been deprecated, as it has not had enough independent implementations to demonstrate interoperability to meet the requirements of a Draft Standard.
.1.3.6.1.2.1.16.19.9,RMON2-MIB::probeDownloadStatus,INTEGER,read-only,,deprecated,downloadSuccess(1):downloadStatusUnknown(2):downloadGeneralError(3):downloadNoResponseFromServer(4):downloadChecksumError(5):downloadIncompatibleImage(6):downloadTftpFileNotFound(7):downloadTftpAccessViolation(8),The status of the last download procedure, if any. This object will have a value of downloadStatusUnknown(2) if no download process has been performed. This object has been deprecated, as it has not had enough independent implementations to demonstrate interoperability to meet the requirements of a Draft Standard.
.1.3.6.1.2.1.16.19.10,RMON2-MIB::serialConfigTable,,not-accessible,,deprecated,,A table of serial interface configuration entries. This data will be stored in non-volatile memory and preserved across probe resets or power loss. This table has been deprecated, as it has not had enough independent implementations to demonstrate interoperability to meet the requirements of a Draft Standard.
.1.3.6.1.2.1.16.19.10.1,RMON2-MIB::serialConfigEntry,,not-accessible,ifIndex,deprecated,,A set of configuration parameters for a particular serial interface on this device. If the device has no serial interfaces, this table is empty. The index is composed of the ifIndex assigned to this serial line interface.
.1.3.6.1.2.1.16.19.10.1.1,RMON2-MIB::serialMode,INTEGER,read-create,,deprecated,direct(1):modem(2),The type of incoming connection to be expected on this serial interface.
.1.3.6.1.2.1.16.19.10.1.2,RMON2-MIB::serialProtocol,INTEGER,read-create,,deprecated,other(1):slip(2):ppp(3),The type of data link encapsulation to be used on this serial interface.
.1.3.6.1.2.1.16.19.10.1.3,RMON2-MIB::serialTimeout,Integer32,read-create,,deprecated,,This timeout value is used when the Management Station has initiated the conversation over the serial link. This variable represents the number of seconds of inactivity allowed before terminating the connection on this serial interface. Use the serialDialoutTimeout in the case where the probe has initiated the connection for the purpose of sending a trap.
.1.3.6.1.2.1.16.19.10.1.4,RMON2-MIB::serialModemInitString,OCTET,read-create,,deprecated,,A control string that controls how a modem attached to this serial interface should be initialized. The initialization is performed once during startup and again after each connection is terminated if the associated serialMode has the value of modem(2). A control string that is appropriate for a wide variety of modems is: '^s^MATE0Q0V1X4 S0=1 S2=43^M'.
.1.3.6.1.2.1.16.19.10.1.5,RMON2-MIB::serialModemHangUpString,OCTET,read-create,,deprecated,,A control string that specifies how to disconnect a modem connection on this serial interface. This object is only meaningful if the associated serialMode has the value of modem(2). A control string that is appropriate for a wide variety of modems is: '^d2^s+++^d2^sATH0^M^d2'.
.1.3.6.1.2.1.16.19.10.1.6,RMON2-MIB::serialModemConnectResp,OCTET,read-create,,deprecated,,An ASCII string containing substrings that describe the expected modem connection response code and associated bps rate. The substrings are delimited by the first character in the string, for example: /CONNECT/300/CONNECT 1200/1200/CONNECT 2400/2400/ CONNECT 4800/4800/CONNECT 9600/9600 will be interpreted as: response code bps rate CONNECT 300 CONNECT 1200 1200 CONNECT 2400 2400 CONNECT 4800 4800 CONNECT 9600 9600 The agent will use the information in this string to adjust the bps rate of this serial interface once a modem connection is established. A value that is appropriate for a wide variety of modems is: '/CONNECT/300/CONNECT 1200/1200/CONNECT 2400/2400/ CONNECT 4800/4800/CONNECT 9600/9600/CONNECT 14400/14400/ CONNECT 19200/19200/CONNECT 38400/38400/'.
.1.3.6.1.2.1.16.19.10.1.7,RMON2-MIB::serialModemNoConnectResp,OCTET,read-create,,deprecated,,An ASCII string containing response codes that may be generated by a modem to report the reason why a connection attempt has failed. The response codes are delimited by the first character in the string, for example: /NO CARRIER/BUSY/NO DIALTONE/NO ANSWER/ERROR/ If one of these response codes is received via this serial interface while attempting to make a modem connection, the agent will issue the hang up command as specified by serialModemHangUpString. A value that is appropriate for a wide variety of modems is: '/NO CARRIER/BUSY/NO DIALTONE/NO ANSWER/ERROR/'.
.1.3.6.1.2.1.16.19.10.1.8,RMON2-MIB::serialDialoutTimeout,Integer32,read-create,,deprecated,,This timeout value is used when the probe initiates the serial connection with the intention of contacting a management station. This variable represents the number of seconds of inactivity allowed before terminating the connection on this serial interface.
.1.3.6.1.2.1.16.19.10.1.9,RMON2-MIB::serialStatus,INTEGER,read-create,,deprecated,active(1):notInService(2):notReady(3):createAndGo(4):createAndWait(5):destroy(6),The status of this serialConfigEntry. An entry may not exist in the active state unless all objects in the entry have an appropriate value.
.1.3.6.1.2.1.16.19.11,RMON2-MIB::netConfigTable,,not-accessible,,deprecated,,A table of netConfigEntries. This table has been deprecated, as it has not had enough independent implementations to demonstrate interoperability to meet the requirements of a Draft Standard.
.1.3.6.1.2.1.16.19.11.1,RMON2-MIB::netConfigEntry,,not-accessible,ifIndex,deprecated,,A set of configuration parameters for a particular network interface on this device. If the device has no network interface, this table is empty. The index is composed of the ifIndex assigned to the corresponding interface.
.1.3.6.1.2.1.16.19.11.1.1,RMON2-MIB::netConfigIPAddress,IpAddress,read-create,,deprecated,,The IP address of this Net interface. The default value for this object is 0.0.0.0. If either the netConfigIPAddress or netConfigSubnetMask is 0.0.0.0, then when the device boots, it may use BOOTP to try to figure out what these values should be. If BOOTP fails before the device can talk on the network, this value must be configured (e.g., through a terminal attached to the device). If BOOTP is used, care should be taken to not send BOOTP broadcasts too frequently and to eventually send them very infrequently if no replies are received.
.1.3.6.1.2.1.16.19.11.1.2,RMON2-MIB::netConfigSubnetMask,IpAddress,read-create,,deprecated,,The subnet mask of this Net interface. The default value for this object is 0.0.0.0. If either the netConfigIPAddress or netConfigSubnetMask is 0.0.0.0, then when the device boots, it may use BOOTP to try to figure out what these values should be. If BOOTP fails before the device can talk on the network, this value must be configured (e.g., through a terminal attached to the device). If BOOTP is used, care should be taken to not send BOOTP broadcasts too frequently and to eventually send them very infrequently if no replies are received.
.1.3.6.1.2.1.16.19.11.1.3,RMON2-MIB::netConfigStatus,INTEGER,read-create,,deprecated,active(1):notInService(2):notReady(3):createAndGo(4):createAndWait(5):destroy(6),The status of this netConfigEntry. An entry may not exist in the active state unless all objects in the entry have an appropriate value.
.1.3.6.1.2.1.16.19.12,RMON2-MIB::netDefaultGateway,IpAddress,read-write,,deprecated,,The IP Address of the default gateway. If this value is undefined or unknown, it shall have the value 0.0.0.0.
.1.3.6.1.2.1.16.19.13,RMON2-MIB::trapDestTable,,not-accessible,,deprecated,,A list of trap destination entries.
.1.3.6.1.2.1.16.19.13.1,RMON2-MIB::trapDestEntry,,not-accessible,trapDestIndex,deprecated,,This entry includes a destination IP address to which traps are sent for this community.
.1.3.6.1.2.1.16.19.13.1.1,RMON2-MIB::trapDestIndex,Integer32,not-accessible,,deprecated,,A value that uniquely identifies this trapDestEntry.
.1.3.6.1.2.1.16.19.13.1.2,RMON2-MIB::trapDestCommunity,OCTET,read-create,,deprecated,,A community to which this destination address belongs. This entry is associated with any eventEntries in the RMON MIB whose value of eventCommunity is equal to the value of this object. Every time an associated event entry sends a trap due to an event, that trap will be sent to each address in the trapDestTable with a trapDestCommunity equal to eventCommunity, as long as no access control mechanism precludes it (e.g., VACM). This object may not be modified if the associated trapDestStatus object is equal to active(1).
.1.3.6.1.2.1.16.19.13.1.3,RMON2-MIB::trapDestProtocol,INTEGER,read-create,,deprecated,ip(1):ipx(2),The protocol with which this trap is to be sent.
.1.3.6.1.2.1.16.19.13.1.4,RMON2-MIB::trapDestAddress,OCTET,read-create,,deprecated,,The destination address for traps on behalf of this entry. If the associated trapDestProtocol object is equal to ip(1), the encoding of this object is the same as the snmpUDPAddress textual convention in RFC 3417, 'Transport Mappings for the Simple Network Management Protocol (SNMP)' [RFC3417]: -- for a SnmpUDPAddress of length 6: -- -- octets contents encoding -- 1-4 IP-address network-byte order -- 5-6 UDP-port network-byte order If the associated trapDestProtocol object is equal to ipx(2), the encoding of this object is the same as the snmpIPXAddress textual convention in RFC 3417, 'Transport Mappings for the Simple Network Management Protocol (SNMP)' [RFC3417]: -- for a SnmpIPXAddress of length 12: -- -- octets contents encoding -- 1-4 network-number network-byte order -- 5-10 physical-address network-byte order -- 11-12 socket-number network-byte order This object may not be modified if the associated trapDestStatus object is equal to active(1).
.1.3.6.1.2.1.16.19.13.1.5,RMON2-MIB::trapDestOwner,OCTET,read-create,,deprecated,,The entity that configured this entry and is therefore using the resources assigned to it.
.1.3.6.1.2.1.16.19.13.1.6,RMON2-MIB::trapDestStatus,INTEGER,read-create,,deprecated,active(1):notInService(2):notReady(3):createAndGo(4):createAndWait(5):destroy(6),The status of this trap destination entry. An entry may not exist in the active state unless all objects in the entry have an appropriate value.
.1.3.6.1.2.1.16.19.14,RMON2-MIB::serialConnectionTable,,not-accessible,,deprecated,,A list of serialConnectionEntries. This table has been deprecated, as it has not had enough independent implementations to demonstrate interoperability to meet the requirements of a Draft Standard.
.1.3.6.1.2.1.16.19.14.1,RMON2-MIB::serialConnectionEntry,,not-accessible,serialConnectIndex,deprecated,,Configuration for a SLIP link over a serial line.
.1.3.6.1.2.1.16.19.14.1.1,RMON2-MIB::serialConnectIndex,Integer32,not-accessible,,deprecated,,A value that uniquely identifies this serialConnection entry.
.1.3.6.1.2.1.16.19.14.1.2,RMON2-MIB::serialConnectDestIpAddress,IpAddress,read-create,,deprecated,,The IP Address that can be reached at the other end of this serial connection. This object may not be modified if the associated serialConnectStatus object is equal to active(1).
.1.3.6.1.2.1.16.19.14.1.3,RMON2-MIB::serialConnectType,INTEGER,read-create,,deprecated,direct(1):modem(2):switch(3):modemSwitch(4),The type of outgoing connection to be made. If this object has the value direct(1), then a direct serial connection is assumed. If this object has the value modem(2), then serialConnectDialString will be used to make a modem connection. If this object has the value switch(3), then serialConnectSwitchConnectSeq will be used to establish the connection over a serial data switch, and serialConnectSwitchDisconnectSeq will be used to terminate the connection. If this object has the value modem-switch(4), then a modem connection will be made first, followed by the switch connection. This object may not be modified if the associated serialConnectStatus object is equal to active(1).
.1.3.6.1.2.1.16.19.14.1.4,RMON2-MIB::serialConnectDialString,OCTET,read-create,,deprecated,,A control string that specifies how to dial the phone number in order to establish a modem connection. The string should include the dialing prefix and suffix. For example: '^s^MATD9,888-1234^M' will instruct the Probe to send a carriage return, followed by the dialing prefix 'ATD', the phone number '9,888-1234', and a carriage return as the dialing suffix. This object may not be modified if the associated serialConnectStatus object is equal to active(1).
.1.3.6.1.2.1.16.19.14.1.5,RMON2-MIB::serialConnectSwitchConnectSeq,OCTET,read-create,,deprecated,,A control string that specifies how to establish a data switch connection. This object may not be modified if the associated serialConnectStatus object is equal to active(1).
.1.3.6.1.2.1.16.19.14.1.6,RMON2-MIB::serialConnectSwitchDisconnectSeq,OCTET,read-create,,deprecated,,A control string that specifies how to terminate a data switch connection. This object may not be modified if the associated serialConnectStatus object is equal to active(1).
.1.3.6.1.2.1.16.19.14.1.7,RMON2-MIB::serialConnectSwitchResetSeq,OCTET,read-create,,deprecated,,A control string that specifies how to reset a data switch in the event of a timeout. This object may not be modified if the associated serialConnectStatus object is equal to active(1).
.1.3.6.1.2.1.16.19.14.1.8,RMON2-MIB::serialConnectOwner,OCTET,read-create,,deprecated,,The entity that configured this entry and is therefore using the resources assigned to it.
.1.3.6.1.2.1.16.19.14.1.9,RMON2-MIB::serialConnectStatus,INTEGER,read-create,,deprecated,active(1):notInService(2):notReady(3):createAndGo(4):createAndWait(5):destroy(6),The status of this serialConnectionEntry. If the manager attempts to set this object to active(1) when the serialConnectType is set to modem(2) or modem-switch(4) and the serialConnectDialString is a zero-length string or cannot be correctly parsed as a ConnectString, the set request will be rejected with badValue(3). If the manager attempts to set this object to active(1) when the serialConnectType is set to switch(3) or modem-switch(4) and the serialConnectSwitchConnectSeq, the serialConnectSwitchDisconnectSeq, or the serialConnectSwitchResetSeq is a zero-length string or cannot be correctly parsed as a ConnectString, the set request will be rejected with badValue(3). An entry may not exist in the active state unless all objects in the entry have an appropriate value.
.1.3.6.1.2.1.16.20,RMON-MIB::rmonConformance,,,,,,
.1.3.6.1.2.1.16.20.1,RMON2-MIB::rmon2MIBCompliances,,,,,,
.1.3.6.1.2.1.16.20.1.1,RMON2-MIB::rmon2MIBCompliance,,,,,,Describes the requirements for conformance to the RMON2 MIB
.1.3.6.1.2.1.16.20.1.2,RMON2-MIB::rmon2MIBApplicationLayerCompliance,,,,,,Describes the requirements for conformance to the RMON2 MIB with Application-Layer Enhancements.
.1.3.6.1.2.1.16.20.2,RMON2-MIB::rmon2MIBGroups,,,,,,
.1.3.6.1.2.1.16.20.2.1,RMON2-MIB::protocolDirectoryGroup,,,,,,Lists the inventory of protocols the probe has the capability of monitoring and allows the addition, deletion, and configuration of entries in this list.
.1.3.6.1.2.1.16.20.2.2,RMON2-MIB::protocolDistributionGroup,,,,,,Collects the relative amounts of octets and packets for the different protocols detected on a network segment.
.1.3.6.1.2.1.16.20.2.3,RMON2-MIB::addressMapGroup,,,,,,Lists MAC address to network address bindings discovered by the probe and what interface they were last seen on.
.1.3.6.1.2.1.16.20.2.4,RMON2-MIB::nlHostGroup,,,,,,Counts the amount of traffic sent from and to each network address discovered by the probe. Note that while the hlHostControlTable also has objects that control an optional alHostTable, implementation of the alHostTable is not required to fully implement this group.
.1.3.6.1.2.1.16.20.2.5,RMON2-MIB::nlMatrixGroup,,,,,,Counts the amount of traffic sent between each pair of network addresses discovered by the probe. Note that while the hlMatrixControlTable also has objects that control optional alMatrixTables, implementation of the alMatrixTables is not required to fully implement this group.
.1.3.6.1.2.1.16.20.2.6,RMON2-MIB::alHostGroup,,,,,,Counts the amount of traffic, by protocol, sent from and to each network address discovered by the probe. Implementation of this group requires implementation of the Network-Layer Host Group.
.1.3.6.1.2.1.16.20.2.7,RMON2-MIB::alMatrixGroup,,,,,,Counts the amount of traffic, by protocol, sent between each pair of network addresses discovered by the probe. Implementation of this group requires implementation of the Network-Layer Matrix Group.
.1.3.6.1.2.1.16.20.2.8,RMON2-MIB::usrHistoryGroup,,,,,,The usrHistoryGroup provides user-defined collection of historical information from MIB objects on the probe.
.1.3.6.1.2.1.16.20.2.9,RMON2-MIB::probeInformationGroup,,,,,,This group describes various operating parameters of the probe and controls the local time of the probe.
.1.3.6.1.2.1.16.20.2.10,RMON2-MIB::probeConfigurationGroup,,,,,,This group controls the configuration of various operating parameters of the probe. This group is not referenced by any MODULE-COMPLIANCE macro because it is 'grandfathered' from more recent MIB review rules that would require it.
.1.3.6.1.2.1.16.20.2.11,RMON2-MIB::rmon1EnhancementGroup,,,,,,This group adds some enhancements to RMON-1 that help management stations.
.1.3.6.1.2.1.16.20.2.12,RMON2-MIB::rmon1EthernetEnhancementGroup,,,,,,This group adds some enhancements to RMON-1 that help management stations.
.1.3.6.1.2.1.16.20.2.13,RMON2-MIB::rmon1TokenRingEnhancementGroup,,,,,,This group adds some enhancements to RMON-1 that help management stations. This group is not referenced by any MODULE-COMPLIANCE macro because it is 'grandfathered' from more recent MIB review rules that would require it.
.1.3.6.1.2.1.16.20.8,RMON-MIB::rmonMibModule,,,,,,Remote network monitoring devices, often called monitors or probes, are instruments that exist for the purpose of managing a network. This MIB defines objects for managing remote network monitoring devices.
.1.3.6.1.2.1.16.20.9,RMON-MIB::rmonCompliances,,,,,,
.1.3.6.1.2.1.16.20.9.1,RMON-MIB::rmonCompliance,,,,,,The requirements for conformance to the RMON MIB. At least one of the groups in this module must be implemented to conform to the RMON MIB. Implementations of this MIB must also implement the system group of MIB-II [16] and the IF-MIB [17].
.1.3.6.1.2.1.16.20.10,RMON-MIB::rmonGroups,,,,,,
.1.3.6.1.2.1.16.20.10.1,RMON-MIB::rmonEtherStatsGroup,,,,,,The RMON Ethernet Statistics Group.
.1.3.6.1.2.1.16.20.10.2,RMON-MIB::rmonHistoryControlGroup,,,,,,The RMON History Control Group.
.1.3.6.1.2.1.16.20.10.3,RMON-MIB::rmonEthernetHistoryGroup,,,,,,The RMON Ethernet History Group.
.1.3.6.1.2.1.16.20.10.4,RMON-MIB::rmonAlarmGroup,,,,,,The RMON Alarm Group.
.1.3.6.1.2.1.16.20.10.5,RMON-MIB::rmonHostGroup,,,,,,The RMON Host Group.
.1.3.6.1.2.1.16.20.10.6,RMON-MIB::rmonHostTopNGroup,,,,,,The RMON Host Top 'N' Group.
.1.3.6.1.2.1.16.20.10.7,RMON-MIB::rmonMatrixGroup,,,,,,The RMON Matrix Group.
.1.3.6.1.2.1.16.20.10.8,RMON-MIB::rmonFilterGroup,,,,,,The RMON Filter Group.
.1.3.6.1.2.1.16.20.10.9,RMON-MIB::rmonPacketCaptureGroup,,,,,,The RMON Packet Capture Group.
.1.3.6.1.2.1.16.20.10.10,RMON-MIB::rmonEventGroup,,,,,,The RMON Event Group.
.1.3.6.1.2.1.16.20.10.11,RMON-MIB::rmonNotificationGroup,,,,,,The RMON Notification Group.
.1.3.6.1.2.1.17,BRIDGE-MIB::dot1dBridge,,,,,,The Bridge MIB module for managing devices that support IEEE 802.1D. Copyright (C) The Internet Society (2005). This version of this MIB module is part of RFC 4188; see the RFC itself for full legal notices.
.1.3.6.1.2.1.17.0,BRIDGE-MIB::dot1dNotifications,,,,,,
.1.3.6.1.2.1.17.0.1,BRIDGE-MIB::newRoot,,,,,,The newRoot trap indicates that the sending agent has become the new root of the Spanning Tree; the trap is sent by a bridge soon after its election as the new root, e.g., upon expiration of the Topology Change Timer, immediately subsequent to its election. Implementation of this trap is optional.
.1.3.6.1.2.1.17.0.2,BRIDGE-MIB::topologyChange,,,,,,A topologyChange trap is sent by a bridge when any of its configured ports transitions from the Learning state to the Forwarding state, or from the Forwarding state to the Blocking state. The trap is not sent if a newRoot trap is sent for the same transition. Implementation of this trap is optional.
.1.3.6.1.2.1.17.1,BRIDGE-MIB::dot1dBase,,,,,,
.1.3.6.1.2.1.17.1.1,BRIDGE-MIB::dot1dBaseBridgeAddress,OCTET,read-only,,current,,The MAC address used by this bridge when it must be referred to in a unique fashion. It is recommended that this be the numerically smallest MAC address of all ports that belong to this bridge. However, it is only required to be unique. When concatenated with dot1dStpPriority, a unique BridgeIdentifier is formed, which is used in the Spanning Tree Protocol.
.1.3.6.1.2.1.17.1.2,BRIDGE-MIB::dot1dBaseNumPorts,Integer32,read-only,,current,,The number of ports controlled by this bridging entity.
.1.3.6.1.2.1.17.1.3,BRIDGE-MIB::dot1dBaseType,INTEGER,read-only,,current,unknown(1):transparent-only(2):sourceroute-only(3):srt(4),Indicates what type of bridging this bridge can perform. If a bridge is actually performing a certain type of bridging, this will be indicated by entries in the port table for the given type.
.1.3.6.1.2.1.17.1.4,BRIDGE-MIB::dot1dBasePortTable,,not-accessible,,current,,A table that contains generic information about every port that is associated with this bridge. Transparent, source-route, and srt ports are included.
.1.3.6.1.2.1.17.1.4.1,BRIDGE-MIB::dot1dBasePortEntry,,not-accessible,dot1dBasePort,current,,A list of information for each port of the bridge.
.1.3.6.1.2.1.17.1.4.1.1,BRIDGE-MIB::dot1dBasePort,Integer32,read-only,,current,,The port number of the port for which this entry contains bridge management information.
.1.3.6.1.2.1.17.1.4.1.2,BRIDGE-MIB::dot1dBasePortIfIndex,Integer32,read-only,,current,,The value of the instance of the ifIndex object, defined in IF-MIB, for the interface corresponding to this port.
.1.3.6.1.2.1.17.1.4.1.3,BRIDGE-MIB::dot1dBasePortCircuit,OBJECT,read-only,,current,,For a port that (potentially) has the same value of dot1dBasePortIfIndex as another port on the same bridge. This object contains the name of an object instance unique to this port. For example, in the case where multiple ports correspond one-to-one with multiple X.25 virtual circuits, this value might identify an (e.g., the first) object instance associated with the X.25 virtual circuit corresponding to this port. For a port which has a unique value of dot1dBasePortIfIndex, this object can have the value { 0 0 }.
.1.3.6.1.2.1.17.1.4.1.4,BRIDGE-MIB::dot1dBasePortDelayExceededDiscards,Counter32,read-only,,current,,The number of frames discarded by this port due to excessive transit delay through the bridge. It is incremented by both transparent and source route bridges.
.1.3.6.1.2.1.17.1.4.1.5,BRIDGE-MIB::dot1dBasePortMtuExceededDiscards,Counter32,read-only,,current,,The number of frames discarded by this port due to an excessive size. It is incremented by both transparent and source route bridges.
.1.3.6.1.2.1.17.2,BRIDGE-MIB::dot1dStp,,,,,,
.1.3.6.1.2.1.17.2.1,BRIDGE-MIB::dot1dStpProtocolSpecification,INTEGER,read-only,,current,unknown(1):decLb100(2):ieee8021d(3),An indication of what version of the Spanning Tree Protocol is being run. The value 'decLb100(2)' indicates the DEC LANbridge 100 Spanning Tree protocol. IEEE 802.1D implementations will return 'ieee8021d(3)'. If future versions of the IEEE Spanning Tree Protocol that are incompatible with the current version are released a new value will be defined.
.1.3.6.1.2.1.17.2.2,BRIDGE-MIB::dot1dStpPriority,Integer32,read-write,,current,,The value of the write-able portion of the Bridge ID (i.e., the first two octets of the (8 octet long) Bridge ID). The other (last) 6 octets of the Bridge ID are given by the value of dot1dBaseBridgeAddress. On bridges supporting IEEE 802.1t or IEEE 802.1w, permissible values are 0-61440, in steps of 4096.
.1.3.6.1.2.1.17.2.3,BRIDGE-MIB::dot1dStpTimeSinceTopologyChange,TimeTicks,read-only,,current,,The time (in hundredths of a second) since the last time a topology change was detected by the bridge entity. For RSTP, this reports the time since the tcWhile timer for any port on this Bridge was nonzero.
.1.3.6.1.2.1.17.2.4,BRIDGE-MIB::dot1dStpTopChanges,Counter32,read-only,,current,,The total number of topology changes detected by this bridge since the management entity was last reset or initialized.
.1.3.6.1.2.1.17.2.5,BRIDGE-MIB::dot1dStpDesignatedRoot,OCTET,read-only,,current,,The bridge identifier of the root of the spanning tree, as determined by the Spanning Tree Protocol, as executed by this node. This value is used as the Root Identifier parameter in all Configuration Bridge PDUs originated by this node.
.1.3.6.1.2.1.17.2.6,BRIDGE-MIB::dot1dStpRootCost,Integer32,read-only,,current,,The cost of the path to the root as seen from this bridge.
.1.3.6.1.2.1.17.2.7,BRIDGE-MIB::dot1dStpRootPort,Integer32,read-only,,current,,The port number of the port that offers the lowest cost path from this bridge to the root bridge.
.1.3.6.1.2.1.17.2.8,BRIDGE-MIB::dot1dStpMaxAge,Integer32,read-only,,current,,The maximum age of Spanning Tree Protocol information learned from the network on any port before it is discarded, in units of hundredths of a second. This is the actual value that this bridge is currently using.
.1.3.6.1.2.1.17.2.9,BRIDGE-MIB::dot1dStpHelloTime,Integer32,read-only,,current,,The amount of time between the transmission of Configuration bridge PDUs by this node on any port when it is the root of the spanning tree, or trying to become so, in units of hundredths of a second. This is the actual value that this bridge is currently using.
.1.3.6.1.2.1.17.2.10,BRIDGE-MIB::dot1dStpHoldTime,Integer32,read-only,,current,,This time value determines the interval length during which no more than two Configuration bridge PDUs shall be transmitted by this node, in units of hundredths of a second.
.1.3.6.1.2.1.17.2.11,BRIDGE-MIB::dot1dStpForwardDelay,Integer32,read-only,,current,,This time value, measured in units of hundredths of a second, controls how fast a port changes its spanning state when moving towards the Forwarding state. The value determines how long the port stays in each of the Listening and Learning states, which precede the Forwarding state. This value is also used when a topology change has been detected and is underway, to age all dynamic entries in the Forwarding Database. [Note that this value is the one that this bridge is currently using, in contrast to dot1dStpBridgeForwardDelay, which is the value that this bridge and all others would start using if/when this bridge were to become the root.]
.1.3.6.1.2.1.17.2.12,BRIDGE-MIB::dot1dStpBridgeMaxAge,Integer32,read-write,,current,,The value that all bridges use for MaxAge when this bridge is acting as the root. Note that 802.1D-1998 specifies that the range for this parameter is related to the value of dot1dStpBridgeHelloTime. The granularity of this timer is specified by 802.1D-1998 to be 1 second. An agent may return a badValue error if a set is attempted to a value that is not a whole number of seconds.
.1.3.6.1.2.1.17.2.13,BRIDGE-MIB::dot1dStpBridgeHelloTime,Integer32,read-write,,current,,The value that all bridges use for HelloTime when this bridge is acting as the root. The granularity of this timer is specified by 802.1D-1998 to be 1 second. An agent may return a badValue error if a set is attempted to a value that is not a whole number of seconds.
.1.3.6.1.2.1.17.2.14,BRIDGE-MIB::dot1dStpBridgeForwardDelay,Integer32,read-write,,current,,The value that all bridges use for ForwardDelay when this bridge is acting as the root. Note that 802.1D-1998 specifies that the range for this parameter is related to the value of dot1dStpBridgeMaxAge. The granularity of this timer is specified by 802.1D-1998 to be 1 second. An agent may return a badValue error if a set is attempted to a value that is not a whole number of seconds.
.1.3.6.1.2.1.17.2.15,BRIDGE-MIB::dot1dStpPortTable,,not-accessible,,current,,A table that contains port-specific information for the Spanning Tree Protocol.
.1.3.6.1.2.1.17.2.15.1,BRIDGE-MIB::dot1dStpPortEntry,,not-accessible,dot1dStpPort,current,,A list of information maintained by every port about the Spanning Tree Protocol state for that port.
.1.3.6.1.2.1.17.2.15.1.1,BRIDGE-MIB::dot1dStpPort,Integer32,read-only,,current,,The port number of the port for which this entry contains Spanning Tree Protocol management information.
.1.3.6.1.2.1.17.2.15.1.2,BRIDGE-MIB::dot1dStpPortPriority,Integer32,read-write,,current,,The value of the priority field that is contained in the first (in network byte order) octet of the (2 octet long) Port ID. The other octet of the Port ID is given by the value of dot1dStpPort. On bridges supporting IEEE 802.1t or IEEE 802.1w, permissible values are 0-240, in steps of 16.
.1.3.6.1.2.1.17.2.15.1.3,BRIDGE-MIB::dot1dStpPortState,INTEGER,read-only,,current,disabled(1):blocking(2):listening(3):learning(4):forwarding(5):broken(6),The port's current state, as defined by application of the Spanning Tree Protocol. This state controls what action a port takes on reception of a frame. If the bridge has detected a port that is malfunctioning, it will place that port into the broken(6) state. For ports that are disabled (see dot1dStpPortEnable), this object will have a value of disabled(1).
.1.3.6.1.2.1.17.2.15.1.4,BRIDGE-MIB::dot1dStpPortEnable,INTEGER,read-write,,current,enabled(1):disabled(2),The enabled/disabled status of the port.
.1.3.6.1.2.1.17.2.15.1.5,BRIDGE-MIB::dot1dStpPortPathCost,Integer32,read-write,,current,,The contribution of this port to the path cost of paths towards the spanning tree root which include this port. 802.1D-1998 recommends that the default value of this parameter be in inverse proportion to the speed of the attached LAN. New implementations should support dot1dStpPortPathCost32. If the port path costs exceeds the maximum value of this object then this object should report the maximum value, namely 65535. Applications should try to read the dot1dStpPortPathCost32 object if this object reports the maximum value.
.1.3.6.1.2.1.17.2.15.1.6,BRIDGE-MIB::dot1dStpPortDesignatedRoot,OCTET,read-only,,current,,The unique Bridge Identifier of the Bridge recorded as the Root in the Configuration BPDUs transmitted by the Designated Bridge for the segment to which the port is attached.
.1.3.6.1.2.1.17.2.15.1.7,BRIDGE-MIB::dot1dStpPortDesignatedCost,Integer32,read-only,,current,,The path cost of the Designated Port of the segment connected to this port. This value is compared to the Root Path Cost field in received bridge PDUs.
.1.3.6.1.2.1.17.2.15.1.8,BRIDGE-MIB::dot1dStpPortDesignatedBridge,OCTET,read-only,,current,,The Bridge Identifier of the bridge that this port considers to be the Designated Bridge for this port's segment.
.1.3.6.1.2.1.17.2.15.1.9,BRIDGE-MIB::dot1dStpPortDesignatedPort,OCTET,read-only,,current,,The Port Identifier of the port on the Designated Bridge for this port's segment.
.1.3.6.1.2.1.17.2.15.1.10,BRIDGE-MIB::dot1dStpPortForwardTransitions,Counter32,read-only,,current,,The number of times this port has transitioned from the Learning state to the Forwarding state.
.1.3.6.1.2.1.17.2.15.1.11,BRIDGE-MIB::dot1dStpPortPathCost32,Integer32,read-write,,current,,The contribution of this port to the path cost of paths towards the spanning tree root which include this port. 802.1D-1998 recommends that the default value of this parameter be in inverse proportion to the speed of the attached LAN. This object replaces dot1dStpPortPathCost to support IEEE 802.1t.
.1.3.6.1.2.1.17.3,BRIDGE-MIB::dot1dSr,,,,,,
.1.3.6.1.2.1.17.4,BRIDGE-MIB::dot1dTp,,,,,,
.1.3.6.1.2.1.17.4.1,BRIDGE-MIB::dot1dTpLearnedEntryDiscards,Counter32,read-only,,current,,The total number of Forwarding Database entries that have been or would have been learned, but have been discarded due to a lack of storage space in the Forwarding Database. If this counter is increasing, it indicates that the Forwarding Database is regularly becoming full (a condition that has unpleasant performance effects on the subnetwork). If this counter has a significant value but is not presently increasing, it indicates that the problem has been occurring but is not persistent.
.1.3.6.1.2.1.17.4.2,BRIDGE-MIB::dot1dTpAgingTime,Integer32,read-write,,current,,The timeout period in seconds for aging out dynamically-learned forwarding information. 802.1D-1998 recommends a default of 300 seconds.
.1.3.6.1.2.1.17.4.3,BRIDGE-MIB::dot1dTpFdbTable,,not-accessible,,current,,A table that contains information about unicast entries for which the bridge has forwarding and/or filtering information. This information is used by the transparent bridging function in determining how to propagate a received frame.
.1.3.6.1.2.1.17.4.3.1,BRIDGE-MIB::dot1dTpFdbEntry,,not-accessible,dot1dTpFdbAddress,current,,Information about a specific unicast MAC address for which the bridge has some forwarding and/or filtering information.
.1.3.6.1.2.1.17.4.3.1.1,BRIDGE-MIB::dot1dTpFdbAddress,OCTET,read-only,,current,,A unicast MAC address for which the bridge has forwarding and/or filtering information.
.1.3.6.1.2.1.17.4.3.1.2,BRIDGE-MIB::dot1dTpFdbPort,Integer32,read-only,,current,,Either the value '0', or the port number of the port on which a frame having a source address equal to the value of the corresponding instance of dot1dTpFdbAddress has been seen. A value of '0' indicates that the port number has not been learned, but that the bridge does have some forwarding/filtering information about this address (e.g., in the dot1dStaticTable). Implementors are encouraged to assign the port value to this object whenever it is learned, even for addresses for which the corresponding value of dot1dTpFdbStatus is not learned(3).
.1.3.6.1.2.1.17.4.3.1.3,BRIDGE-MIB::dot1dTpFdbStatus,INTEGER,read-only,,current,other(1):invalid(2):learned(3):self(4):mgmt(5),The status of this entry. The meanings of the values are: other(1) - none of the following. This would include the case where some other MIB object (not the corresponding instance of dot1dTpFdbPort, nor an entry in the dot1dStaticTable) is being used to determine if and how frames addressed to the value of the corresponding instance of dot1dTpFdbAddress are being forwarded. invalid(2) - this entry is no longer valid (e.g., it was learned but has since aged out), but has not yet been flushed from the table. learned(3) - the value of the corresponding instance of dot1dTpFdbPort was learned, and is being used. self(4) - the value of the corresponding instance of dot1dTpFdbAddress represents one of the bridge's addresses. The corresponding instance of dot1dTpFdbPort indicates which of the bridge's ports has this address. mgmt(5) - the value of the corresponding instance of dot1dTpFdbAddress is also the value of an existing instance of dot1dStaticAddress.
.1.3.6.1.2.1.17.4.4,BRIDGE-MIB::dot1dTpPortTable,,not-accessible,,current,,A table that contains information about every port that is associated with this transparent bridge.
.1.3.6.1.2.1.17.4.4.1,BRIDGE-MIB::dot1dTpPortEntry,,not-accessible,dot1dTpPort,current,,A list of information for each port of a transparent bridge.
.1.3.6.1.2.1.17.4.4.1.1,BRIDGE-MIB::dot1dTpPort,Integer32,read-only,,current,,The port number of the port for which this entry contains Transparent bridging management information.
.1.3.6.1.2.1.17.4.4.1.2,BRIDGE-MIB::dot1dTpPortMaxInfo,Integer32,read-only,,current,,The maximum size of the INFO (non-MAC) field that this port will receive or transmit.
.1.3.6.1.2.1.17.4.4.1.3,BRIDGE-MIB::dot1dTpPortInFrames,Counter32,read-only,,current,,The number of frames that have been received by this port from its segment. Note that a frame received on the interface corresponding to this port is only counted by this object if and only if it is for a protocol being processed by the local bridging function, including bridge management frames.
.1.3.6.1.2.1.17.4.4.1.4,BRIDGE-MIB::dot1dTpPortOutFrames,Counter32,read-only,,current,,The number of frames that have been transmitted by this port to its segment. Note that a frame transmitted on the interface corresponding to this port is only counted by this object if and only if it is for a protocol being processed by the local bridging function, including bridge management frames.
.1.3.6.1.2.1.17.4.4.1.5,BRIDGE-MIB::dot1dTpPortInDiscards,Counter32,read-only,,current,,Count of received valid frames that were discarded (i.e., filtered) by the Forwarding Process.
.1.3.6.1.2.1.17.4.5,P-BRIDGE-MIB::dot1dTpHCPortTable,,not-accessible,,current,,A table that contains information about every high- capacity port that is associated with this transparent bridge.
.1.3.6.1.2.1.17.4.5.1,P-BRIDGE-MIB::dot1dTpHCPortEntry,,not-accessible,dot1dTpPort,current,,Statistics information for each high-capacity port of a transparent bridge.
.1.3.6.1.2.1.17.4.5.1.1,P-BRIDGE-MIB::dot1dTpHCPortInFrames,Counter64,read-only,,current,,The number of frames that have been received by this port from its segment. Note that a frame received on the interface corresponding to this port is only counted by this object if and only if it is for a protocol being processed by the local bridging function, including bridge management frames.
.1.3.6.1.2.1.17.4.5.1.2,P-BRIDGE-MIB::dot1dTpHCPortOutFrames,Counter64,read-only,,current,,The number of frames that have been transmitted by this port to its segment. Note that a frame transmitted on the interface corresponding to this port is only counted by this object if and only if it is for a protocol being processed by the local bridging function, including bridge management frames.
.1.3.6.1.2.1.17.4.5.1.3,P-BRIDGE-MIB::dot1dTpHCPortInDiscards,Counter64,read-only,,current,,Count of valid frames that have been received by this port from its segment that were discarded (i.e., filtered) by the Forwarding Process.
.1.3.6.1.2.1.17.4.6,P-BRIDGE-MIB::dot1dTpPortOverflowTable,,not-accessible,,current,,A table that contains the most-significant bits of statistics counters for ports that are associated with this transparent bridge that are on high-capacity interfaces, as defined in the conformance clauses for this table. This table is provided as a way to read 64-bit counters for agents that support only SNMPv1. Note that the reporting of most-significant and least-significant counter bits separately runs the risk of missing an overflow of the lower bits in the interval between sampling. The manager must be aware of this possibility, even within the same varbindlist, when interpreting the results of a request or asynchronous notification.
.1.3.6.1.2.1.17.4.6.1,P-BRIDGE-MIB::dot1dTpPortOverflowEntry,,not-accessible,dot1dTpPort,current,,The most significant bits of statistics counters for a high- capacity interface of a transparent bridge. Each object is associated with a corresponding object in dot1dTpPortTable that indicates the least significant bits of the counter.
.1.3.6.1.2.1.17.4.6.1.1,P-BRIDGE-MIB::dot1dTpPortInOverflowFrames,Counter32,read-only,,current,,The number of times the associated dot1dTpPortInFrames counter has overflowed.
.1.3.6.1.2.1.17.4.6.1.2,P-BRIDGE-MIB::dot1dTpPortOutOverflowFrames,Counter32,read-only,,current,,The number of times the associated dot1dTpPortOutFrames counter has overflowed.
.1.3.6.1.2.1.17.4.6.1.3,P-BRIDGE-MIB::dot1dTpPortInOverflowDiscards,Counter32,read-only,,current,,The number of times the associated dot1dTpPortInDiscards counter has overflowed.
.1.3.6.1.2.1.17.5,BRIDGE-MIB::dot1dStatic,,,,,,
.1.3.6.1.2.1.17.5.1,BRIDGE-MIB::dot1dStaticTable,,not-accessible,,current,,A table containing filtering information configured into the bridge by (local or network) management specifying the set of ports to which frames received from specific ports and containing specific destination addresses are allowed to be forwarded. The value of zero in this table, as the port number from which frames with a specific destination address are received, is used to specify all ports for which there is no specific entry in this table for that particular destination address. Entries are valid for unicast and for group/broadcast addresses.
.1.3.6.1.2.1.17.5.1.1,BRIDGE-MIB::dot1dStaticEntry,,not-accessible,dot1dStaticAddress:dot1dStaticReceivePort,current,,Filtering information configured into the bridge by (local or network) management specifying the set of ports to which frames received from a specific port and containing a specific destination address are allowed to be forwarded.
.1.3.6.1.2.1.17.5.1.1.1,BRIDGE-MIB::dot1dStaticAddress,OCTET,read-create,,current,,The destination MAC address in a frame to which this entry's filtering information applies. This object can take the value of a unicast address, a group address, or the broadcast address.
.1.3.6.1.2.1.17.5.1.1.2,BRIDGE-MIB::dot1dStaticReceivePort,Integer32,read-create,,current,,Either the value '0', or the port number of the port from which a frame must be received in order for this entry's filtering information to apply. A value of zero indicates that this entry applies on all ports of the bridge for which there is no other applicable entry.
.1.3.6.1.2.1.17.5.1.1.3,BRIDGE-MIB::dot1dStaticAllowedToGoTo,OCTET,read-create,,current,,The set of ports to which frames received from a specific port and destined for a specific MAC address, are allowed to be forwarded. Each octet within the value of this object specifies a set of eight ports, with the first octet specifying ports 1 through 8, the second octet specifying ports 9 through 16, etc. Within each octet, the most significant bit represents the lowest numbered port, and the least significant bit represents the highest numbered port. Thus, each port of the bridge is represented by a single bit within the value of this object. If that bit has a value of '1', then that port is included in the set of ports; the port is not included if its bit has a value of '0'. (Note that the setting of the bit corresponding to the port from which a frame is received is irrelevant.) The default value of this object is a string of ones of appropriate length. The value of this object may exceed the required minimum maximum message size of some SNMP transport (484 bytes, in the case of SNMP over UDP, see RFC 3417, section 3.2). SNMP engines on bridges supporting a large number of ports must support appropriate maximum message sizes.
.1.3.6.1.2.1.17.5.1.1.4,BRIDGE-MIB::dot1dStaticStatus,INTEGER,read-create,,current,other(1):invalid(2):permanent(3):deleteOnReset(4):deleteOnTimeout(5),This object indicates the status of this entry. The default value is permanent(3). other(1) - this entry is currently in use but the conditions under which it will remain so are different from each of the following values. invalid(2) - writing this value to the object removes the corresponding entry. permanent(3) - this entry is currently in use and will remain so after the next reset of the bridge. deleteOnReset(4) - this entry is currently in use and will remain so until the next reset of the bridge. deleteOnTimeout(5) - this entry is currently in use and will remain so until it is aged out.
.1.3.6.1.2.1.17.6,P-BRIDGE-MIB::pBridgeMIB,,,,,,The Bridge MIB Extension module for managing Priority and Multicast Filtering, defined by IEEE 802.1D-1998, including Restricted Group Registration defined by IEEE 802.1t-2001. Copyright (C) The Internet Society (2006). This version of this MIB module is part of RFC 4363; See the RFC itself for full legal notices.
.1.3.6.1.2.1.17.6.1,P-BRIDGE-MIB::pBridgeMIBObjects,,,,,,
.1.3.6.1.2.1.17.6.1.1,P-BRIDGE-MIB::dot1dExtBase,,,,,,
.1.3.6.1.2.1.17.6.1.1.1,P-BRIDGE-MIB::dot1dDeviceCapabilities,BITS,read-only,,current,dot1dExtendedFilteringServices(0):dot1dTrafficClasses(1):dot1qStaticEntryIndividualPort(2):dot1qIVLCapable(3):dot1qSVLCapable(4):dot1qHybridCapable(5):dot1qConfigurablePvidTagging(6):dot1dLocalVlanCapable(7),Indicates the optional parts of IEEE 802.1D and 802.1Q that are implemented by this device and are manageable through this MIB. Capabilities that are allowed on a per-port basis are indicated in dot1dPortCapabilities. dot1dExtendedFilteringServices(0), -- can perform filtering of -- individual multicast addresses -- controlled by GMRP. dot1dTrafficClasses(1), -- can map user priority to -- multiple traffic classes. dot1qStaticEntryIndividualPort(2), -- dot1qStaticUnicastReceivePort & -- dot1qStaticMulticastReceivePort -- can represent non-zero entries. dot1qIVLCapable(3), -- Independent VLAN Learning (IVL). dot1qSVLCapable(4), -- Shared VLAN Learning (SVL). dot1qHybridCapable(5), -- both IVL & SVL simultaneously. dot1qConfigurablePvidTagging(6), -- whether the implementation -- supports the ability to -- override the default PVID -- setting and its egress status -- (VLAN-Tagged or Untagged) on -- each port. dot1dLocalVlanCapable(7) -- can support multiple local -- bridges, outside of the scope -- of 802.1Q defined VLANs.
.1.3.6.1.2.1.17.6.1.1.2,P-BRIDGE-MIB::dot1dTrafficClassesEnabled,INTEGER,read-write,,current,true(1):false(2),The value true(1) indicates that Traffic Classes are enabled on this bridge. When false(2), the bridge operates with a single priority level for all traffic. The value of this object MUST be retained across reinitializations of the management system.
.1.3.6.1.2.1.17.6.1.1.3,P-BRIDGE-MIB::dot1dGmrpStatus,INTEGER,read-write,,current,enabled(1):disabled(2),The administrative status requested by management for GMRP. The value enabled(1) indicates that GMRP should be enabled on this device, in all VLANs, on all ports for which it has not been specifically disabled. When disabled(2), GMRP is disabled, in all VLANs and on all ports, and all GMRP packets will be forwarded transparently. This object affects both Applicant and Registrar state machines. A transition from disabled(2) to enabled(1) will cause a reset of all GMRP state machines on all ports. The value of this object MUST be retained across reinitializations of the management system.
.1.3.6.1.2.1.17.6.1.1.4,P-BRIDGE-MIB::dot1dPortCapabilitiesTable,,not-accessible,,current,,A table that contains capabilities information about every port that is associated with this bridge.
.1.3.6.1.2.1.17.6.1.1.4.1,P-BRIDGE-MIB::dot1dPortCapabilitiesEntry,,not-accessible,,current,,A set of capabilities information about this port indexed by dot1dBasePort.
.1.3.6.1.2.1.17.6.1.1.4.1.1,P-BRIDGE-MIB::dot1dPortCapabilities,BITS,read-only,,current,dot1qDot1qTagging(0):dot1qConfigurableAcceptableFrameTypes(1):dot1qIngressFiltering(2),Indicates the parts of IEEE 802.1D and 802.1Q that are optional on a per-port basis, that are implemented by this device, and that are manageable through this MIB. dot1qDot1qTagging(0), -- supports 802.1Q VLAN tagging of -- frames and GVRP. dot1qConfigurableAcceptableFrameTypes(1), -- allows modified values of -- dot1qPortAcceptableFrameTypes. dot1qIngressFiltering(2) -- supports the discarding of any -- frame received on a Port whose -- VLAN classification does not -- include that Port in its Member -- set.
.1.3.6.1.2.1.17.6.1.2,P-BRIDGE-MIB::dot1dPriority,,,,,,
.1.3.6.1.2.1.17.6.1.2.1,P-BRIDGE-MIB::dot1dPortPriorityTable,,not-accessible,,current,,A table that contains information about every port that is associated with this transparent bridge.
.1.3.6.1.2.1.17.6.1.2.1.1,P-BRIDGE-MIB::dot1dPortPriorityEntry,,not-accessible,,current,,A list of Default User Priorities for each port of a transparent bridge. This is indexed by dot1dBasePort.
.1.3.6.1.2.1.17.6.1.2.1.1.1,P-BRIDGE-MIB::dot1dPortDefaultUserPriority,Integer32,read-write,,current,,The default ingress User Priority for this port. This only has effect on media, such as Ethernet, that do not support native User Priority. The value of this object MUST be retained across reinitializations of the management system.
.1.3.6.1.2.1.17.6.1.2.1.1.2,P-BRIDGE-MIB::dot1dPortNumTrafficClasses,Integer32,read-write,,current,,The number of egress traffic classes supported on this port. This object may optionally be read-only. The value of this object MUST be retained across reinitializations of the management system.
.1.3.6.1.2.1.17.6.1.2.2,P-BRIDGE-MIB::dot1dUserPriorityRegenTable,,not-accessible,,current,,A list of Regenerated User Priorities for each received User Priority on each port of a bridge. The Regenerated User Priority value may be used to index the Traffic Class Table for each input port. This only has effect on media that support native User Priority. The default values for Regenerated User Priorities are the same as the User Priorities.
.1.3.6.1.2.1.17.6.1.2.2.1,P-BRIDGE-MIB::dot1dUserPriorityRegenEntry,,not-accessible,dot1dBasePort:dot1dUserPriority,current,,A mapping of incoming User Priority to a Regenerated User Priority.
.1.3.6.1.2.1.17.6.1.2.2.1.1,P-BRIDGE-MIB::dot1dUserPriority,Integer32,not-accessible,,current,,The User Priority for a frame received on this port.
.1.3.6.1.2.1.17.6.1.2.2.1.2,P-BRIDGE-MIB::dot1dRegenUserPriority,Integer32,read-write,,current,,The Regenerated User Priority that the incoming User Priority is mapped to for this port. The value of this object MUST be retained across reinitializations of the management system.
.1.3.6.1.2.1.17.6.1.2.3,P-BRIDGE-MIB::dot1dTrafficClassTable,,not-accessible,,current,,A table mapping evaluated User Priority to Traffic Class, for forwarding by the bridge. Traffic class is a number in the range (0..(dot1dPortNumTrafficClasses-1)).
.1.3.6.1.2.1.17.6.1.2.3.1,P-BRIDGE-MIB::dot1dTrafficClassEntry,,not-accessible,dot1dBasePort:dot1dTrafficClassPriority,current,,User Priority to Traffic Class mapping.
.1.3.6.1.2.1.17.6.1.2.3.1.1,P-BRIDGE-MIB::dot1dTrafficClassPriority,Integer32,not-accessible,,current,,The Priority value determined for the received frame. This value is equivalent to the priority indicated in the tagged frame received, or one of the evaluated priorities, determined according to the media-type. For untagged frames received from Ethernet media, this value is equal to the dot1dPortDefaultUserPriority value for the ingress port. For untagged frames received from non-Ethernet media, this value is equal to the dot1dRegenUserPriority value for the ingress port and media-specific user priority.
.1.3.6.1.2.1.17.6.1.2.3.1.2,P-BRIDGE-MIB::dot1dTrafficClass,Integer32,read-write,,current,,The Traffic Class the received frame is mapped to. The value of this object MUST be retained across reinitializations of the management system.
.1.3.6.1.2.1.17.6.1.2.4,P-BRIDGE-MIB::dot1dPortOutboundAccessPriorityTable,,not-accessible,,current,,A table mapping Regenerated User Priority to Outbound Access Priority. This is a fixed mapping for all port types, with two options for 802.5 Token Ring.
.1.3.6.1.2.1.17.6.1.2.4.1,P-BRIDGE-MIB::dot1dPortOutboundAccessPriorityEntry,,not-accessible,dot1dBasePort:dot1dRegenUserPriority,current,,Regenerated User Priority to Outbound Access Priority mapping.
.1.3.6.1.2.1.17.6.1.2.4.1.1,P-BRIDGE-MIB::dot1dPortOutboundAccessPriority,Integer32,read-only,,current,,The Outbound Access Priority the received frame is mapped to.
.1.3.6.1.2.1.17.6.1.3,P-BRIDGE-MIB::dot1dGarp,,,,,,
.1.3.6.1.2.1.17.6.1.3.1,P-BRIDGE-MIB::dot1dPortGarpTable,,not-accessible,,current,,A table of GARP control information about every bridge port. This is indexed by dot1dBasePort.
.1.3.6.1.2.1.17.6.1.3.1.1,P-BRIDGE-MIB::dot1dPortGarpEntry,,not-accessible,,current,,GARP control information for a bridge port.
.1.3.6.1.2.1.17.6.1.3.1.1.1,P-BRIDGE-MIB::dot1dPortGarpJoinTime,INTEGER,read-write,,current,,The GARP Join time, in centiseconds. The value of this object MUST be retained across reinitializations of the management system.
.1.3.6.1.2.1.17.6.1.3.1.1.2,P-BRIDGE-MIB::dot1dPortGarpLeaveTime,INTEGER,read-write,,current,,The GARP Leave time, in centiseconds. The value of this object MUST be retained across reinitializations of the management system.
.1.3.6.1.2.1.17.6.1.3.1.1.3,P-BRIDGE-MIB::dot1dPortGarpLeaveAllTime,INTEGER,read-write,,current,,The GARP LeaveAll time, in centiseconds. The value of this object MUST be retained across reinitializations of the management system.
.1.3.6.1.2.1.17.6.1.4,P-BRIDGE-MIB::dot1dGmrp,,,,,,
.1.3.6.1.2.1.17.6.1.4.1,P-BRIDGE-MIB::dot1dPortGmrpTable,,not-accessible,,current,,A table of GMRP control and status information about every bridge port. Augments the dot1dBasePortTable.
.1.3.6.1.2.1.17.6.1.4.1.1,P-BRIDGE-MIB::dot1dPortGmrpEntry,,not-accessible,,current,,GMRP control and status information for a bridge port.
.1.3.6.1.2.1.17.6.1.4.1.1.1,P-BRIDGE-MIB::dot1dPortGmrpStatus,INTEGER,read-write,,current,enabled(1):disabled(2),The administrative state of GMRP operation on this port. The value enabled(1) indicates that GMRP is enabled on this port in all VLANs as long as dot1dGmrpStatus is also enabled(1). A value of disabled(2) indicates that GMRP is disabled on this port in all VLANs: any GMRP packets received will be silently discarded, and no GMRP registrations will be propagated from other ports. Setting this to a value of enabled(1) will be stored by the agent but will only take effect on the GMRP protocol operation if dot1dGmrpStatus also indicates the value enabled(1). This object affects all GMRP Applicant and Registrar state machines on this port. A transition from disabled(2) to enabled(1) will cause a reset of all GMRP state machines on this port. The value of this object MUST be retained across reinitializations of the management system.
.1.3.6.1.2.1.17.6.1.4.1.1.2,P-BRIDGE-MIB::dot1dPortGmrpFailedRegistrations,Counter32,read-only,,current,,The total number of failed GMRP registrations, for any reason, in all VLANs, on this port.
.1.3.6.1.2.1.17.6.1.4.1.1.3,P-BRIDGE-MIB::dot1dPortGmrpLastPduOrigin,OCTET,read-only,,current,,The Source MAC Address of the last GMRP message received on this port.
.1.3.6.1.2.1.17.6.1.4.1.1.4,P-BRIDGE-MIB::dot1dPortRestrictedGroupRegistration,INTEGER,read-write,,current,true(1):false(2),The state of Restricted Group Registration on this port. If the value of this control is true(1), then creation of a new dynamic entry is permitted only if there is a Static Filtering Entry for the VLAN concerned, in which the Registrar Administrative Control value is Normal Registration. The value of this object MUST be retained across reinitializations of the management system.
.1.3.6.1.2.1.17.6.2,P-BRIDGE-MIB::pBridgeConformance,,,,,,
.1.3.6.1.2.1.17.6.2.1,P-BRIDGE-MIB::pBridgeGroups,,,,,,
.1.3.6.1.2.1.17.6.2.1.1,P-BRIDGE-MIB::pBridgeExtCapGroup,,,,,,A collection of objects indicating the optional capabilities of the device.
.1.3.6.1.2.1.17.6.2.1.2,P-BRIDGE-MIB::pBridgeDeviceGmrpGroup,,,,,,A collection of objects providing device-level control for the Multicast Filtering extended bridge services.
.1.3.6.1.2.1.17.6.2.1.3,P-BRIDGE-MIB::pBridgeDevicePriorityGroup,,,,,,A collection of objects providing device-level control for the Priority services.
.1.3.6.1.2.1.17.6.2.1.4,P-BRIDGE-MIB::pBridgeDefaultPriorityGroup,,,,,,A collection of objects defining the User Priority applicable to each port for media that do not support native User Priority.
.1.3.6.1.2.1.17.6.2.1.5,P-BRIDGE-MIB::pBridgeRegenPriorityGroup,,,,,,A collection of objects defining the User Priorities applicable to each port for media that support native User Priority.
.1.3.6.1.2.1.17.6.2.1.6,P-BRIDGE-MIB::pBridgePriorityGroup,,,,,,A collection of objects defining the traffic classes within a bridge for each evaluated User Priority.
.1.3.6.1.2.1.17.6.2.1.7,P-BRIDGE-MIB::pBridgeAccessPriorityGroup,,,,,,A collection of objects defining the media-dependent outbound access level for each priority.
.1.3.6.1.2.1.17.6.2.1.8,P-BRIDGE-MIB::pBridgePortGarpGroup,,,,,,A collection of objects providing port level control and status information for GARP operation.
.1.3.6.1.2.1.17.6.2.1.9,P-BRIDGE-MIB::pBridgePortGmrpGroup,,,,,,A collection of objects providing port level control and status information for GMRP operation.
.1.3.6.1.2.1.17.6.2.1.10,P-BRIDGE-MIB::pBridgeHCPortGroup,,,,,,A collection of objects providing 64-bit statistics counters for high-capacity bridge ports.
.1.3.6.1.2.1.17.6.2.1.11,P-BRIDGE-MIB::pBridgePortOverflowGroup,,,,,,A collection of objects providing overflow statistics counters for high-capacity bridge ports.
.1.3.6.1.2.1.17.6.2.1.12,P-BRIDGE-MIB::pBridgePortGmrpGroup2,,,,,,A collection of objects providing port level control and status information for GMRP operation.
.1.3.6.1.2.1.17.6.2.2,P-BRIDGE-MIB::pBridgeCompliances,,,,,,
.1.3.6.1.2.1.17.6.2.2.1,P-BRIDGE-MIB::pBridgeCompliance,,,,,,The compliance statement for device support of Priority and Multicast Filtering extended bridging services.
.1.3.6.1.2.1.17.6.2.2.2,P-BRIDGE-MIB::pBridgeCompliance2,,,,,,The compliance statement for device support of Priority and Multicast Filtering extended bridging services.
.1.3.6.1.2.1.17.7,Q-BRIDGE-MIB::qBridgeMIB,,,,,,The VLAN Bridge MIB module for managing Virtual Bridged Local Area Networks, as defined by IEEE 802.1Q-2003, including Restricted Vlan Registration defined by IEEE 802.1u-2001 and Vlan Classification defined by IEEE 802.1v-2001. Copyright (C) The Internet Society (2006). This version of this MIB module is part of RFC 4363; See the RFC itself for full legal notices.
.1.3.6.1.2.1.17.7.1,Q-BRIDGE-MIB::qBridgeMIBObjects,,,,,,
.1.3.6.1.2.1.17.7.1.1,Q-BRIDGE-MIB::dot1qBase,,,,,,
.1.3.6.1.2.1.17.7.1.1.1,Q-BRIDGE-MIB::dot1qVlanVersionNumber,INTEGER,read-only,,current,version1(1),The version number of IEEE 802.1Q that this device supports.
.1.3.6.1.2.1.17.7.1.1.2,Q-BRIDGE-MIB::dot1qMaxVlanId,Integer32,read-only,,current,,The maximum IEEE 802.1Q VLAN-ID that this device supports.
.1.3.6.1.2.1.17.7.1.1.3,Q-BRIDGE-MIB::dot1qMaxSupportedVlans,Unsigned32,read-only,,current,,The maximum number of IEEE 802.1Q VLANs that this device supports.
.1.3.6.1.2.1.17.7.1.1.4,Q-BRIDGE-MIB::dot1qNumVlans,Unsigned32,read-only,,current,,The current number of IEEE 802.1Q VLANs that are configured in this device.
.1.3.6.1.2.1.17.7.1.1.5,Q-BRIDGE-MIB::dot1qGvrpStatus,INTEGER,read-write,,current,enabled(1):disabled(2),The administrative status requested by management for GVRP. The value enabled(1) indicates that GVRP should be enabled on this device, on all ports for which it has not been specifically disabled. When disabled(2), GVRP is disabled on all ports, and all GVRP packets will be forwarded transparently. This object affects all GVRP Applicant and Registrar state machines. A transition from disabled(2) to enabled(1) will cause a reset of all GVRP state machines on all ports. The value of this object MUST be retained across reinitializations of the management system.
.1.3.6.1.2.1.17.7.1.2,Q-BRIDGE-MIB::dot1qTp,,,,,,
.1.3.6.1.2.1.17.7.1.2.1,Q-BRIDGE-MIB::dot1qFdbTable,,not-accessible,,current,,A table that contains configuration and control information for each Filtering Database currently operating on this device. Entries in this table appear automatically when VLANs are assigned FDB IDs in the dot1qVlanCurrentTable.
.1.3.6.1.2.1.17.7.1.2.1.1,Q-BRIDGE-MIB::dot1qFdbEntry,,not-accessible,dot1qFdbId,current,,Information about a specific Filtering Database.
.1.3.6.1.2.1.17.7.1.2.1.1.1,Q-BRIDGE-MIB::dot1qFdbId,Unsigned32,not-accessible,,current,,The identity of this Filtering Database.
.1.3.6.1.2.1.17.7.1.2.1.1.2,Q-BRIDGE-MIB::dot1qFdbDynamicCount,Counter32,read-only,,current,,The current number of dynamic entries in this Filtering Database.
.1.3.6.1.2.1.17.7.1.2.2,Q-BRIDGE-MIB::dot1qTpFdbTable,,not-accessible,,current,,A table that contains information about unicast entries for which the device has forwarding and/or filtering information. This information is used by the transparent bridging function in determining how to propagate a received frame.
.1.3.6.1.2.1.17.7.1.2.2.1,Q-BRIDGE-MIB::dot1qTpFdbEntry,,not-accessible,dot1qFdbId:dot1qTpFdbAddress,current,,Information about a specific unicast MAC address for which the device has some forwarding and/or filtering information.
.1.3.6.1.2.1.17.7.1.2.2.1.1,Q-BRIDGE-MIB::dot1qTpFdbAddress,OCTET,not-accessible,,current,,A unicast MAC address for which the device has forwarding and/or filtering information.
.1.3.6.1.2.1.17.7.1.2.2.1.2,Q-BRIDGE-MIB::dot1qTpFdbPort,Integer32,read-only,,current,,Either the value '0', or the port number of the port on which a frame having a source address equal to the value of the corresponding instance of dot1qTpFdbAddress has been seen. A value of '0' indicates that the port number has not been learned but that the device does have some forwarding/filtering information about this address (e.g., in the dot1qStaticUnicastTable). Implementors are encouraged to assign the port value to this object whenever it is learned, even for addresses for which the corresponding value of dot1qTpFdbStatus is not learned(3).
.1.3.6.1.2.1.17.7.1.2.2.1.3,Q-BRIDGE-MIB::dot1qTpFdbStatus,INTEGER,read-only,,current,other(1):invalid(2):learned(3):self(4):mgmt(5),The status of this entry. The meanings of the values are: other(1) - none of the following. This may include the case where some other MIB object (not the corresponding instance of dot1qTpFdbPort, nor an entry in the dot1qStaticUnicastTable) is being used to determine if and how frames addressed to the value of the corresponding instance of dot1qTpFdbAddress are being forwarded. invalid(2) - this entry is no longer valid (e.g., it was learned but has since aged out), but has not yet been flushed from the table. learned(3) - the value of the corresponding instance of dot1qTpFdbPort was learned and is being used. self(4) - the value of the corresponding instance of dot1qTpFdbAddress represents one of the device's addresses. The corresponding instance of dot1qTpFdbPort indicates which of the device's ports has this address. mgmt(5) - the value of the corresponding instance of dot1qTpFdbAddress is also the value of an existing instance of dot1qStaticAddress.
.1.3.6.1.2.1.17.7.1.2.3,Q-BRIDGE-MIB::dot1qTpGroupTable,,not-accessible,,current,,A table containing filtering information for VLANs configured into the bridge by (local or network) management, or learned dynamically, specifying the set of ports to which frames received on a VLAN for this FDB and containing a specific Group destination address are allowed to be forwarded.
.1.3.6.1.2.1.17.7.1.2.3.1,Q-BRIDGE-MIB::dot1qTpGroupEntry,,not-accessible,dot1qVlanIndex:dot1qTpGroupAddress,current,,Filtering information configured into the bridge by management, or learned dynamically, specifying the set of ports to which frames received on a VLAN and containing a specific Group destination address are allowed to be forwarded. The subset of these ports learned dynamically is also provided.
.1.3.6.1.2.1.17.7.1.2.3.1.1,Q-BRIDGE-MIB::dot1qTpGroupAddress,OCTET,not-accessible,,current,,The destination Group MAC address in a frame to which this entry's filtering information applies.
.1.3.6.1.2.1.17.7.1.2.3.1.2,Q-BRIDGE-MIB::dot1qTpGroupEgressPorts,OCTET,read-only,,current,,The complete set of ports, in this VLAN, to which frames destined for this Group MAC address are currently being explicitly forwarded. This does not include ports for which this address is only implicitly forwarded, in the dot1qForwardAllPorts list.
.1.3.6.1.2.1.17.7.1.2.3.1.3,Q-BRIDGE-MIB::dot1qTpGroupLearnt,OCTET,read-only,,current,,The subset of ports in dot1qTpGroupEgressPorts that were learned by GMRP or some other dynamic mechanism, in this Filtering database.
.1.3.6.1.2.1.17.7.1.2.4,Q-BRIDGE-MIB::dot1qForwardAllTable,,not-accessible,,current,,A table containing forwarding information for each VLAN, specifying the set of ports to which forwarding of all multicasts applies, configured statically by management or dynamically by GMRP. An entry appears in this table for all VLANs that are currently instantiated.
.1.3.6.1.2.1.17.7.1.2.4.1,Q-BRIDGE-MIB::dot1qForwardAllEntry,,not-accessible,dot1qVlanIndex,current,,Forwarding information for a VLAN, specifying the set of ports to which all multicasts should be forwarded, configured statically by management or dynamically by GMRP.
.1.3.6.1.2.1.17.7.1.2.4.1.1,Q-BRIDGE-MIB::dot1qForwardAllPorts,OCTET,read-only,,current,,The complete set of ports in this VLAN to which all multicast group-addressed frames are to be forwarded. This includes ports for which this need has been determined dynamically by GMRP, or configured statically by management.
.1.3.6.1.2.1.17.7.1.2.4.1.2,Q-BRIDGE-MIB::dot1qForwardAllStaticPorts,OCTET,read-write,,current,,The set of ports configured by management in this VLAN to which all multicast group-addressed frames are to be forwarded. Ports entered in this list will also appear in the complete set shown by dot1qForwardAllPorts. This value will be restored after the device is reset. This only applies to ports that are members of the VLAN, defined by dot1qVlanCurrentEgressPorts. A port may not be added in this set if it is already a member of the set of ports in dot1qForwardAllForbiddenPorts. The default value is a string of ones of appropriate length, to indicate the standard behaviour of using basic filtering services, i.e., forward all multicasts to all ports. The value of this object MUST be retained across reinitializations of the management system.
.1.3.6.1.2.1.17.7.1.2.4.1.3,Q-BRIDGE-MIB::dot1qForwardAllForbiddenPorts,OCTET,read-write,,current,,The set of ports configured by management in this VLAN for which the Service Requirement attribute Forward All Multicast Groups may not be dynamically registered by GMRP. This value will be restored after the device is reset. A port may not be added in this set if it is already a member of the set of ports in dot1qForwardAllStaticPorts. The default value is a string of zeros of appropriate length. The value of this object MUST be retained across reinitializations of the management system.
.1.3.6.1.2.1.17.7.1.2.5,Q-BRIDGE-MIB::dot1qForwardUnregisteredTable,,not-accessible,,current,,A table containing forwarding information for each VLAN, specifying the set of ports to which forwarding of multicast group-addressed frames for which no more specific forwarding information applies. This is configured statically by management and determined dynamically by GMRP. An entry appears in this table for all VLANs that are currently instantiated.
.1.3.6.1.2.1.17.7.1.2.5.1,Q-BRIDGE-MIB::dot1qForwardUnregisteredEntry,,not-accessible,dot1qVlanIndex,current,,Forwarding information for a VLAN, specifying the set of ports to which all multicasts for which there is no more specific forwarding information shall be forwarded. This is configured statically by management or dynamically by GMRP.
.1.3.6.1.2.1.17.7.1.2.5.1.1,Q-BRIDGE-MIB::dot1qForwardUnregisteredPorts,OCTET,read-only,,current,,The complete set of ports in this VLAN to which multicast group-addressed frames for which there is no more specific forwarding information will be forwarded. This includes ports for which this need has been determined dynamically by GMRP, or configured statically by management.
.1.3.6.1.2.1.17.7.1.2.5.1.2,Q-BRIDGE-MIB::dot1qForwardUnregisteredStaticPorts,OCTET,read-write,,current,,The set of ports configured by management, in this VLAN, to which multicast group-addressed frames for which there is no more specific forwarding information are to be forwarded. Ports entered in this list will also appear in the complete set shown by dot1qForwardUnregisteredPorts. This value will be restored after the device is reset. A port may not be added in this set if it is already a member of the set of ports in dot1qForwardUnregisteredForbiddenPorts. The default value is a string of zeros of appropriate length, although this has no effect with the default value of dot1qForwardAllStaticPorts. The value of this object MUST be retained across reinitializations of the management system.
.1.3.6.1.2.1.17.7.1.2.5.1.3,Q-BRIDGE-MIB::dot1qForwardUnregisteredForbiddenPorts,OCTET,read-write,,current,,The set of ports configured by management in this VLAN for which the Service Requirement attribute Forward Unregistered Multicast Groups may not be dynamically registered by GMRP. This value will be restored after the device is reset. A port may not be added in this set if it is already a member of the set of ports in dot1qForwardUnregisteredStaticPorts. The default value is a string of zeros of appropriate length. The value of this object MUST be retained across reinitializations of the management system.
.1.3.6.1.2.1.17.7.1.3,Q-BRIDGE-MIB::dot1qStatic,,,,,,
.1.3.6.1.2.1.17.7.1.3.1,Q-BRIDGE-MIB::dot1qStaticUnicastTable,,not-accessible,,current,,A table containing filtering information for Unicast MAC addresses for each Filtering Database, configured into the device by (local or network) management specifying the set of ports to which frames received from specific ports and containing specific unicast destination addresses are allowed to be forwarded. A value of zero in this table (as the port number from which frames with a specific destination address are received) is used to specify all ports for which there is no specific entry in this table for that particular destination address. Entries are valid for unicast addresses only.
.1.3.6.1.2.1.17.7.1.3.1.1,Q-BRIDGE-MIB::dot1qStaticUnicastEntry,,not-accessible,dot1qFdbId:dot1qStaticUnicastAddress:dot1qStaticUnicastReceivePort,current,,Filtering information configured into the device by (local or network) management specifying the set of ports to which frames received from a specific port and containing a specific unicast destination address are allowed to be forwarded.
.1.3.6.1.2.1.17.7.1.3.1.1.1,Q-BRIDGE-MIB::dot1qStaticUnicastAddress,OCTET,not-accessible,,current,,The destination MAC address in a frame to which this entry's filtering information applies. This object must take the value of a unicast address.
.1.3.6.1.2.1.17.7.1.3.1.1.2,Q-BRIDGE-MIB::dot1qStaticUnicastReceivePort,Integer32,not-accessible,,current,,Either the value '0' or the port number of the port from which a frame must be received in order for this entry's filtering information to apply. A value of zero indicates that this entry applies on all ports of the device for which there is no other applicable entry.
.1.3.6.1.2.1.17.7.1.3.1.1.3,Q-BRIDGE-MIB::dot1qStaticUnicastAllowedToGoTo,OCTET,read-write,,current,,The set of ports for which a frame with a specific unicast address will be flooded in the event that it has not been learned. It also specifies the set of ports on which a specific unicast address may be dynamically learned. The dot1qTpFdbTable will have an equivalent entry with a dot1qTpFdbPort value of '0' until this address has been learned, at which point it will be updated with the port the address has been seen on. This only applies to ports that are members of the VLAN, defined by dot1qVlanCurrentEgressPorts. The default value of this object is a string of ones of appropriate length. The value of this object MUST be retained across reinitializations of the management system.
.1.3.6.1.2.1.17.7.1.3.1.1.4,Q-BRIDGE-MIB::dot1qStaticUnicastStatus,INTEGER,read-write,,current,other(1):invalid(2):permanent(3):deleteOnReset(4):deleteOnTimeout(5),This object indicates the status of this entry. other(1) - this entry is currently in use, but the conditions under which it will remain so differ from the following values. invalid(2) - writing this value to the object removes the corresponding entry. permanent(3) - this entry is currently in use and will remain so after the next reset of the bridge. deleteOnReset(4) - this entry is currently in use and will remain so until the next reset of the bridge. deleteOnTimeout(5) - this entry is currently in use and will remain so until it is aged out. The value of this object MUST be retained across reinitializations of the management system.
.1.3.6.1.2.1.17.7.1.3.2,Q-BRIDGE-MIB::dot1qStaticMulticastTable,,not-accessible,,current,,A table containing filtering information for Multicast and Broadcast MAC addresses for each VLAN, configured into the device by (local or network) management specifying the set of ports to which frames received from specific ports and containing specific Multicast and Broadcast destination addresses are allowed to be forwarded. A value of zero in this table (as the port number from which frames with a specific destination address are received) is used to specify all ports for which there is no specific entry in this table for that particular destination address. Entries are valid for Multicast and Broadcast addresses only.
.1.3.6.1.2.1.17.7.1.3.2.1,Q-BRIDGE-MIB::dot1qStaticMulticastEntry,,not-accessible,dot1qVlanIndex:dot1qStaticMulticastAddress:dot1qStaticMulticastReceivePort,current,,Filtering information configured into the device by (local or network) management specifying the set of ports to which frames received from this specific port for this VLAN and containing this Multicast or Broadcast destination address are allowed to be forwarded.
.1.3.6.1.2.1.17.7.1.3.2.1.1,Q-BRIDGE-MIB::dot1qStaticMulticastAddress,OCTET,not-accessible,,current,,The destination MAC address in a frame to which this entry's filtering information applies. This object must take the value of a Multicast or Broadcast address.
.1.3.6.1.2.1.17.7.1.3.2.1.2,Q-BRIDGE-MIB::dot1qStaticMulticastReceivePort,Integer32,not-accessible,,current,,Either the value '0' or the port number of the port from which a frame must be received in order for this entry's filtering information to apply. A value of zero indicates that this entry applies on all ports of the device for which there is no other applicable entry.
.1.3.6.1.2.1.17.7.1.3.2.1.3,Q-BRIDGE-MIB::dot1qStaticMulticastStaticEgressPorts,OCTET,read-write,,current,,The set of ports to which frames received from a specific port and destined for a specific Multicast or Broadcast MAC address must be forwarded, regardless of any dynamic information, e.g., from GMRP. A port may not be added in this set if it is already a member of the set of ports in dot1qStaticMulticastForbiddenEgressPorts. The default value of this object is a string of ones of appropriate length. The value of this object MUST be retained across reinitializations of the management system.
.1.3.6.1.2.1.17.7.1.3.2.1.4,Q-BRIDGE-MIB::dot1qStaticMulticastForbiddenEgressPorts,OCTET,read-write,,current,,The set of ports to which frames received from a specific port and destined for a specific Multicast or Broadcast MAC address must not be forwarded, regardless of any dynamic information, e.g., from GMRP. A port may not be added in this set if it is already a member of the set of ports in dot1qStaticMulticastStaticEgressPorts. The default value of this object is a string of zeros of appropriate length. The value of this object MUST be retained across reinitializations of the management system.
.1.3.6.1.2.1.17.7.1.3.2.1.5,Q-BRIDGE-MIB::dot1qStaticMulticastStatus,INTEGER,read-write,,current,other(1):invalid(2):permanent(3):deleteOnReset(4):deleteOnTimeout(5),This object indicates the status of this entry. other(1) - this entry is currently in use, but the conditions under which it will remain so differ from the following values. invalid(2) - writing this value to the object removes the corresponding entry. permanent(3) - this entry is currently in use and will remain so after the next reset of the bridge. deleteOnReset(4) - this entry is currently in use and will remain so until the next reset of the bridge. deleteOnTimeout(5) - this entry is currently in use and will remain so until it is aged out. The value of this object MUST be retained across reinitializations of the management system.
.1.3.6.1.2.1.17.7.1.4,Q-BRIDGE-MIB::dot1qVlan,,,,,,
.1.3.6.1.2.1.17.7.1.4.1,Q-BRIDGE-MIB::dot1qVlanNumDeletes,Counter32,read-only,,current,,The number of times a VLAN entry has been deleted from the dot1qVlanCurrentTable (for any reason). If an entry is deleted, then inserted, and then deleted, this counter will be incremented by 2.
.1.3.6.1.2.1.17.7.1.4.2,Q-BRIDGE-MIB::dot1qVlanCurrentTable,,not-accessible,,current,,A table containing current configuration information for each VLAN currently configured into the device by (local or network) management, or dynamically created as a result of GVRP requests received.
.1.3.6.1.2.1.17.7.1.4.2.1,Q-BRIDGE-MIB::dot1qVlanCurrentEntry,,not-accessible,dot1qVlanTimeMark:dot1qVlanIndex,current,,Information for a VLAN configured into the device by (local or network) management, or dynamically created as a result of GVRP requests received.
.1.3.6.1.2.1.17.7.1.4.2.1.1,Q-BRIDGE-MIB::dot1qVlanTimeMark,TimeTicks,not-accessible,,current,,A TimeFilter for this entry. See the TimeFilter textual convention to see how this works.
.1.3.6.1.2.1.17.7.1.4.2.1.2,Q-BRIDGE-MIB::dot1qVlanIndex,Unsigned32,not-accessible,,current,,The VLAN-ID or other identifier referring to this VLAN.
.1.3.6.1.2.1.17.7.1.4.2.1.3,Q-BRIDGE-MIB::dot1qVlanFdbId,Unsigned32,read-only,,current,,The Filtering Database used by this VLAN. This is one of the dot1qFdbId values in the dot1qFdbTable. This value is allocated automatically by the device whenever the VLAN is created: either dynamically by GVRP, or by management, in dot1qVlanStaticTable. Allocation of this value follows the learning constraints defined for this VLAN in dot1qLearningConstraintsTable.
.1.3.6.1.2.1.17.7.1.4.2.1.4,Q-BRIDGE-MIB::dot1qVlanCurrentEgressPorts,OCTET,read-only,,current,,The set of ports that are transmitting traffic for this VLAN as either tagged or untagged frames.
.1.3.6.1.2.1.17.7.1.4.2.1.5,Q-BRIDGE-MIB::dot1qVlanCurrentUntaggedPorts,OCTET,read-only,,current,,The set of ports that are transmitting traffic for this VLAN as untagged frames.
.1.3.6.1.2.1.17.7.1.4.2.1.6,Q-BRIDGE-MIB::dot1qVlanStatus,INTEGER,read-only,,current,other(1):permanent(2):dynamicGvrp(3),This object indicates the status of this entry. other(1) - this entry is currently in use, but the conditions under which it will remain so differ from the following values. permanent(2) - this entry, corresponding to an entry in dot1qVlanStaticTable, is currently in use and will remain so after the next reset of the device. The port lists for this entry include ports from the equivalent dot1qVlanStaticTable entry and ports learned dynamically. dynamicGvrp(3) - this entry is currently in use and will remain so until removed by GVRP. There is no static entry for this VLAN, and it will be removed when the last port leaves the VLAN.
.1.3.6.1.2.1.17.7.1.4.2.1.7,Q-BRIDGE-MIB::dot1qVlanCreationTime,TimeTicks,read-only,,current,,The value of sysUpTime when this VLAN was created.
.1.3.6.1.2.1.17.7.1.4.3,Q-BRIDGE-MIB::dot1qVlanStaticTable,,not-accessible,,current,,A table containing static configuration information for each VLAN configured into the device by (local or network) management. All entries are permanent and will be restored after the device is reset.
.1.3.6.1.2.1.17.7.1.4.3.1,Q-BRIDGE-MIB::dot1qVlanStaticEntry,,not-accessible,dot1qVlanIndex,current,,Static information for a VLAN configured into the device by (local or network) management.
.1.3.6.1.2.1.17.7.1.4.3.1.1,Q-BRIDGE-MIB::dot1qVlanStaticName,OCTET,read-create,,current,,An administratively assigned string, which may be used to identify the VLAN.
.1.3.6.1.2.1.17.7.1.4.3.1.2,Q-BRIDGE-MIB::dot1qVlanStaticEgressPorts,OCTET,read-create,,current,,The set of ports that are permanently assigned to the egress list for this VLAN by management. Changes to a bit in this object affect the per-port, per-VLAN Registrar control for Registration Fixed for the relevant GVRP state machine on each port. A port may not be added in this set if it is already a member of the set of ports in dot1qVlanForbiddenEgressPorts. The default value of this object is a string of zeros of appropriate length, indicating not fixed.
.1.3.6.1.2.1.17.7.1.4.3.1.3,Q-BRIDGE-MIB::dot1qVlanForbiddenEgressPorts,OCTET,read-create,,current,,The set of ports that are prohibited by management from being included in the egress list for this VLAN. Changes to this object that cause a port to be included or excluded affect the per-port, per-VLAN Registrar control for Registration Forbidden for the relevant GVRP state machine on each port. A port may not be added in this set if it is already a member of the set of ports in dot1qVlanStaticEgressPorts. The default value of this object is a string of zeros of appropriate length, excluding all ports from the forbidden set.
.1.3.6.1.2.1.17.7.1.4.3.1.4,Q-BRIDGE-MIB::dot1qVlanStaticUntaggedPorts,OCTET,read-create,,current,,The set of ports that should transmit egress packets for this VLAN as untagged. The default value of this object for the default VLAN (dot1qVlanIndex = 1) is a string of appropriate length including all ports. There is no specified default for other VLANs. If a device agent cannot support the set of ports being set, then it will reject the set operation with an error. For example, a manager might attempt to set more than one VLAN to be untagged on egress where the device does not support this IEEE 802.1Q option.
.1.3.6.1.2.1.17.7.1.4.3.1.5,Q-BRIDGE-MIB::dot1qVlanStaticRowStatus,INTEGER,read-create,,current,active(1):notInService(2):notReady(3):createAndGo(4):createAndWait(5):destroy(6),This object indicates the status of this entry.
.1.3.6.1.2.1.17.7.1.4.4,Q-BRIDGE-MIB::dot1qNextFreeLocalVlanIndex,Integer32,read-only,,current,,The next available value for dot1qVlanIndex of a local VLAN entry in dot1qVlanStaticTable. This will report values >=4096 if a new Local VLAN may be created or else the value 0 if this is not possible. A row creation operation in this table for an entry with a local VlanIndex value may fail if the current value of this object is not used as the index. Even if the value read is used, there is no guarantee that it will still be the valid index when the create operation is attempted; another manager may have already got in during the intervening time interval. In this case, dot1qNextFreeLocalVlanIndex should be re-read and the creation re-tried with the new value. This value will automatically change when the current value is used to create a new row.
.1.3.6.1.2.1.17.7.1.4.5,Q-BRIDGE-MIB::dot1qPortVlanTable,,not-accessible,,current,,A table containing per-port control and status information for VLAN configuration in the device.
.1.3.6.1.2.1.17.7.1.4.5.1,Q-BRIDGE-MIB::dot1qPortVlanEntry,,not-accessible,,current,,Information controlling VLAN configuration for a port on the device. This is indexed by dot1dBasePort.
.1.3.6.1.2.1.17.7.1.4.5.1.1,Q-BRIDGE-MIB::dot1qPvid,Unsigned32,read-write,,current,,The PVID, the VLAN-ID assigned to untagged frames or Priority-Tagged frames received on this port. The value of this object MUST be retained across reinitializations of the management system.
.1.3.6.1.2.1.17.7.1.4.5.1.2,Q-BRIDGE-MIB::dot1qPortAcceptableFrameTypes,INTEGER,read-write,,current,admitAll(1):admitOnlyVlanTagged(2),When this is admitOnlyVlanTagged(2), the device will discard untagged frames or Priority-Tagged frames received on this port. When admitAll(1), untagged frames or Priority-Tagged frames received on this port will be accepted and assigned to a VID based on the PVID and VID Set for this port. This control does not affect VLAN-independent Bridge Protocol Data Unit (BPDU) frames, such as GVRP and Spanning Tree Protocol (STP). It does affect VLAN- dependent BPDU frames, such as GMRP. The value of this object MUST be retained across reinitializations of the management system.
.1.3.6.1.2.1.17.7.1.4.5.1.3,Q-BRIDGE-MIB::dot1qPortIngressFiltering,INTEGER,read-write,,current,true(1):false(2),When this is true(1), the device will discard incoming frames for VLANs that do not include this Port in its Member set. When false(2), the port will accept all incoming frames. This control does not affect VLAN-independent BPDU frames, such as GVRP and STP. It does affect VLAN- dependent BPDU frames, such as GMRP. The value of this object MUST be retained across reinitializations of the management system.
.1.3.6.1.2.1.17.7.1.4.5.1.4,Q-BRIDGE-MIB::dot1qPortGvrpStatus,INTEGER,read-write,,current,enabled(1):disabled(2),The state of GVRP operation on this port. The value enabled(1) indicates that GVRP is enabled on this port, as long as dot1qGvrpStatus is also enabled for this device. When disabled(2) but dot1qGvrpStatus is still enabled for the device, GVRP is disabled on this port: any GVRP packets received will be silently discarded, and no GVRP registrations will be propagated from other ports. This object affects all GVRP Applicant and Registrar state machines on this port. A transition from disabled(2) to enabled(1) will cause a reset of all GVRP state machines on this port. The value of this object MUST be retained across reinitializations of the management system.
.1.3.6.1.2.1.17.7.1.4.5.1.5,Q-BRIDGE-MIB::dot1qPortGvrpFailedRegistrations,Counter32,read-only,,current,,The total number of failed GVRP registrations, for any reason, on this port.
.1.3.6.1.2.1.17.7.1.4.5.1.6,Q-BRIDGE-MIB::dot1qPortGvrpLastPduOrigin,OCTET,read-only,,current,,The Source MAC Address of the last GVRP message received on this port.
.1.3.6.1.2.1.17.7.1.4.5.1.7,Q-BRIDGE-MIB::dot1qPortRestrictedVlanRegistration,INTEGER,read-write,,current,true(1):false(2),The state of Restricted VLAN Registration on this port. If the value of this control is true(1), then creation of a new dynamic VLAN entry is permitted only if there is a Static VLAN Registration Entry for the VLAN concerned, in which the Registrar Administrative Control value for this port is Normal Registration. The value of this object MUST be retained across reinitializations of the management system.
.1.3.6.1.2.1.17.7.1.4.6,Q-BRIDGE-MIB::dot1qPortVlanStatisticsTable,,not-accessible,,current,,A table containing per-port, per-VLAN statistics for traffic received. Separate objects are provided for both the most-significant and least-significant bits of statistics counters for ports that are associated with this transparent bridge. The most-significant bit objects are only required on high-capacity interfaces, as defined in the conformance clauses for these objects. This mechanism is provided as a way to read 64-bit counters for agents that support only SNMPv1. Note that the reporting of most-significant and least- significant counter bits separately runs the risk of missing an overflow of the lower bits in the interval between sampling. The manager must be aware of this possibility, even within the same varbindlist, when interpreting the results of a request or asynchronous notification.
.1.3.6.1.2.1.17.7.1.4.6.1,Q-BRIDGE-MIB::dot1qPortVlanStatisticsEntry,,not-accessible,dot1dBasePort:dot1qVlanIndex,current,,Traffic statistics for a VLAN on an interface.
.1.3.6.1.2.1.17.7.1.4.6.1.1,Q-BRIDGE-MIB::dot1qTpVlanPortInFrames,Counter32,read-only,,current,,The number of valid frames received by this port from its segment that were classified as belonging to this VLAN. Note that a frame received on this port is counted by this object if and only if it is for a protocol being processed by the local forwarding process for this VLAN. This object includes received bridge management frames classified as belonging to this VLAN (e.g., GMRP, but not GVRP or STP.
.1.3.6.1.2.1.17.7.1.4.6.1.2,Q-BRIDGE-MIB::dot1qTpVlanPortOutFrames,Counter32,read-only,,current,,The number of valid frames transmitted by this port to its segment from the local forwarding process for this VLAN. This includes bridge management frames originated by this device that are classified as belonging to this VLAN (e.g., GMRP, but not GVRP or STP).
.1.3.6.1.2.1.17.7.1.4.6.1.3,Q-BRIDGE-MIB::dot1qTpVlanPortInDiscards,Counter32,read-only,,current,,The number of valid frames received by this port from its segment that were classified as belonging to this VLAN and that were discarded due to VLAN-related reasons. Specifically, the IEEE 802.1Q counters for Discard Inbound and Discard on Ingress Filtering.
.1.3.6.1.2.1.17.7.1.4.6.1.4,Q-BRIDGE-MIB::dot1qTpVlanPortInOverflowFrames,Counter32,read-only,,current,,The number of times the associated dot1qTpVlanPortInFrames counter has overflowed.
.1.3.6.1.2.1.17.7.1.4.6.1.5,Q-BRIDGE-MIB::dot1qTpVlanPortOutOverflowFrames,Counter32,read-only,,current,,The number of times the associated dot1qTpVlanPortOutFrames counter has overflowed.
.1.3.6.1.2.1.17.7.1.4.6.1.6,Q-BRIDGE-MIB::dot1qTpVlanPortInOverflowDiscards,Counter32,read-only,,current,,The number of times the associated dot1qTpVlanPortInDiscards counter has overflowed.
.1.3.6.1.2.1.17.7.1.4.7,Q-BRIDGE-MIB::dot1qPortVlanHCStatisticsTable,,not-accessible,,current,,A table containing per-port, per-VLAN statistics for traffic on high-capacity interfaces.
.1.3.6.1.2.1.17.7.1.4.7.1,Q-BRIDGE-MIB::dot1qPortVlanHCStatisticsEntry,,not-accessible,dot1dBasePort:dot1qVlanIndex,current,,Traffic statistics for a VLAN on a high-capacity interface.
.1.3.6.1.2.1.17.7.1.4.7.1.1,Q-BRIDGE-MIB::dot1qTpVlanPortHCInFrames,Counter64,read-only,,current,,The number of valid frames received by this port from its segment that were classified as belonging to this VLAN. Note that a frame received on this port is counted by this object if and only if it is for a protocol being processed by the local forwarding process for this VLAN. This object includes received bridge management frames classified as belonging to this VLAN (e.g., GMRP, but not GVRP or STP).
.1.3.6.1.2.1.17.7.1.4.7.1.2,Q-BRIDGE-MIB::dot1qTpVlanPortHCOutFrames,Counter64,read-only,,current,,The number of valid frames transmitted by this port to its segment from the local forwarding process for this VLAN. This includes bridge management frames originated by this device that are classified as belonging to this VLAN (e.g., GMRP, but not GVRP or STP).
.1.3.6.1.2.1.17.7.1.4.7.1.3,Q-BRIDGE-MIB::dot1qTpVlanPortHCInDiscards,Counter64,read-only,,current,,The number of valid frames received by this port from its segment that were classified as belonging to this VLAN and that were discarded due to VLAN-related reasons. Specifically, the IEEE 802.1Q counters for Discard Inbound and Discard on Ingress Filtering.
.1.3.6.1.2.1.17.7.1.4.8,Q-BRIDGE-MIB::dot1qLearningConstraintsTable,,not-accessible,,current,,A table containing learning constraints for sets of Shared and Independent VLANs.
.1.3.6.1.2.1.17.7.1.4.8.1,Q-BRIDGE-MIB::dot1qLearningConstraintsEntry,,not-accessible,dot1qConstraintVlan:dot1qConstraintSet,current,,A learning constraint defined for a VLAN.
.1.3.6.1.2.1.17.7.1.4.8.1.1,Q-BRIDGE-MIB::dot1qConstraintVlan,Unsigned32,not-accessible,,current,,The index of the row in dot1qVlanCurrentTable for the VLAN constrained by this entry.
.1.3.6.1.2.1.17.7.1.4.8.1.2,Q-BRIDGE-MIB::dot1qConstraintSet,Integer32,not-accessible,,current,,The identity of the constraint set to which dot1qConstraintVlan belongs. These values may be chosen by the management station.
.1.3.6.1.2.1.17.7.1.4.8.1.3,Q-BRIDGE-MIB::dot1qConstraintType,INTEGER,read-create,,current,independent(1):shared(2),The type of constraint this entry defines. independent(1) - the VLAN, dot1qConstraintVlan, uses a filtering database independent from all other VLANs in the same set, defined by dot1qConstraintSet. shared(2) - the VLAN, dot1qConstraintVlan, shares the same filtering database as all other VLANs in the same set, defined by dot1qConstraintSet.
.1.3.6.1.2.1.17.7.1.4.8.1.4,Q-BRIDGE-MIB::dot1qConstraintStatus,INTEGER,read-create,,current,active(1):notInService(2):notReady(3):createAndGo(4):createAndWait(5):destroy(6),The status of this entry.
.1.3.6.1.2.1.17.7.1.4.9,Q-BRIDGE-MIB::dot1qConstraintSetDefault,Integer32,read-write,,current,,The identity of the constraint set to which a VLAN belongs, if there is not an explicit entry for that VLAN in dot1qLearningConstraintsTable. The value of this object MUST be retained across reinitializations of the management system.
.1.3.6.1.2.1.17.7.1.4.10,Q-BRIDGE-MIB::dot1qConstraintTypeDefault,INTEGER,read-write,,current,independent(1):shared(2),The type of constraint set to which a VLAN belongs, if there is not an explicit entry for that VLAN in dot1qLearningConstraintsTable. The types are as defined for dot1qConstraintType. The value of this object MUST be retained across reinitializations of the management system.
.1.3.6.1.2.1.17.7.1.5,Q-BRIDGE-MIB::dot1vProtocol,,,,,,
.1.3.6.1.2.1.17.7.1.5.1,Q-BRIDGE-MIB::dot1vProtocolGroupTable,,not-accessible,,current,,A table that contains mappings from Protocol Templates to Protocol Group Identifiers used for Port-and-Protocol-based VLAN Classification.
.1.3.6.1.2.1.17.7.1.5.1.1,Q-BRIDGE-MIB::dot1vProtocolGroupEntry,,not-accessible,dot1vProtocolTemplateFrameType:dot1vProtocolTemplateProtocolValue,current,,A mapping from a Protocol Template to a Protocol Group Identifier.
.1.3.6.1.2.1.17.7.1.5.1.1.1,Q-BRIDGE-MIB::dot1vProtocolTemplateFrameType,INTEGER,not-accessible,,current,ethernet(1):rfc1042(2):snap8021H(3):snapOther(4):llcOther(5),The data-link encapsulation format or the 'detagged_frame_type' in a Protocol Template.
.1.3.6.1.2.1.17.7.1.5.1.1.2,Q-BRIDGE-MIB::dot1vProtocolTemplateProtocolValue,OCTET,not-accessible,,current,,The identification of the protocol above the data-link layer in a Protocol Template. Depending on the frame type, the octet string will have one of the following values: For 'ethernet', 'rfc1042' and 'snap8021H', this is the 16-bit (2-octet) IEEE 802.3 Type Field. For 'snapOther', this is the 40-bit (5-octet) PID. For 'llcOther', this is the 2-octet IEEE 802.2 Link Service Access Point (LSAP) pair: first octet for Destination Service Access Point (DSAP) and second octet for Source Service Access Point (SSAP).
.1.3.6.1.2.1.17.7.1.5.1.1.3,Q-BRIDGE-MIB::dot1vProtocolGroupId,Integer32,read-create,,current,,Represents a group of protocols that are associated together when assigning a VID to a frame.
.1.3.6.1.2.1.17.7.1.5.1.1.4,Q-BRIDGE-MIB::dot1vProtocolGroupRowStatus,INTEGER,read-create,,current,active(1):notInService(2):notReady(3):createAndGo(4):createAndWait(5):destroy(6),This object indicates the status of this entry.
.1.3.6.1.2.1.17.7.1.5.2,Q-BRIDGE-MIB::dot1vProtocolPortTable,,not-accessible,,current,,A table that contains VID sets used for Port-and-Protocol-based VLAN Classification.
.1.3.6.1.2.1.17.7.1.5.2.1,Q-BRIDGE-MIB::dot1vProtocolPortEntry,,not-accessible,dot1dBasePort:dot1vProtocolPortGroupId,current,,A VID set for a port.
.1.3.6.1.2.1.17.7.1.5.2.1.1,Q-BRIDGE-MIB::dot1vProtocolPortGroupId,Integer32,not-accessible,,current,,Designates a group of protocols in the Protocol Group Database.
.1.3.6.1.2.1.17.7.1.5.2.1.2,Q-BRIDGE-MIB::dot1vProtocolPortGroupVid,Integer32,read-create,,current,,The VID associated with a group of protocols for each port.
.1.3.6.1.2.1.17.7.1.5.2.1.3,Q-BRIDGE-MIB::dot1vProtocolPortRowStatus,INTEGER,read-create,,current,active(1):notInService(2):notReady(3):createAndGo(4):createAndWait(5):destroy(6),This object indicates the status of this entry.
.1.3.6.1.2.1.17.7.2,Q-BRIDGE-MIB::qBridgeConformance,,,,,,
.1.3.6.1.2.1.17.7.2.1,Q-BRIDGE-MIB::qBridgeGroups,,,,,,
.1.3.6.1.2.1.17.7.2.1.1,Q-BRIDGE-MIB::qBridgeBaseGroup,,,,,,A collection of objects providing device-level control and status information for the Virtual LAN bridge services.
.1.3.6.1.2.1.17.7.2.1.2,Q-BRIDGE-MIB::qBridgeFdbUnicastGroup,,,,,,A collection of objects providing information about all unicast addresses, learned dynamically or statically configured by management, in each Filtering Database.
.1.3.6.1.2.1.17.7.2.1.3,Q-BRIDGE-MIB::qBridgeFdbMulticastGroup,,,,,,A collection of objects providing information about all multicast addresses, learned dynamically or statically configured by management, in each Filtering Database.
.1.3.6.1.2.1.17.7.2.1.4,Q-BRIDGE-MIB::qBridgeServiceRequirementsGroup,,,,,,A collection of objects providing information about service requirements, learned dynamically or statically configured by management, in each Filtering Database.
.1.3.6.1.2.1.17.7.2.1.5,Q-BRIDGE-MIB::qBridgeFdbStaticGroup,,,,,,A collection of objects providing information about unicast and multicast addresses statically configured by management, in each Filtering Database or VLAN.
.1.3.6.1.2.1.17.7.2.1.6,Q-BRIDGE-MIB::qBridgeVlanGroup,,,,,,A collection of objects providing information about all VLANs currently configured on this device.
.1.3.6.1.2.1.17.7.2.1.7,Q-BRIDGE-MIB::qBridgeVlanStaticGroup,,,,,,A collection of objects providing information about VLANs statically configured by management.
.1.3.6.1.2.1.17.7.2.1.8,Q-BRIDGE-MIB::qBridgePortGroup,,,,,,A collection of objects providing port-level VLAN control and status information for all ports.
.1.3.6.1.2.1.17.7.2.1.9,Q-BRIDGE-MIB::qBridgeVlanStatisticsGroup,,,,,,A collection of objects providing per-port packet statistics for all VLANs currently configured on this device.
.1.3.6.1.2.1.17.7.2.1.10,Q-BRIDGE-MIB::qBridgeVlanStatisticsOverflowGroup,,,,,,A collection of objects providing overflow counters for per-port packet statistics for all VLANs currently configured on this device for high-capacity interfaces, defined as those that have the value of the corresponding instance of ifSpeed greater than 650,000,000 bits/second.
.1.3.6.1.2.1.17.7.2.1.11,Q-BRIDGE-MIB::qBridgeVlanHCStatisticsGroup,,,,,,A collection of objects providing per-port packet statistics for all VLANs currently configured on this device for high-capacity interfaces, defined as those that have the value of the corresponding instance of ifSpeed greater than 650,000,000 bits/second.
.1.3.6.1.2.1.17.7.2.1.12,Q-BRIDGE-MIB::qBridgeLearningConstraintsGroup,,,,,,A collection of objects defining the Filtering Database constraints all VLANs have with each other.
.1.3.6.1.2.1.17.7.2.1.13,Q-BRIDGE-MIB::qBridgeLearningConstraintDefaultGroup,,,,,,A collection of objects defining the default Filtering Database constraints for VLANs that have no specific constraints defined.
.1.3.6.1.2.1.17.7.2.1.14,Q-BRIDGE-MIB::qBridgeClassificationDeviceGroup,,,,,,VLAN classification information for the bridge.
.1.3.6.1.2.1.17.7.2.1.15,Q-BRIDGE-MIB::qBridgeClassificationPortGroup,,,,,,VLAN classification information for individual ports.
.1.3.6.1.2.1.17.7.2.1.16,Q-BRIDGE-MIB::qBridgePortGroup2,,,,,,A collection of objects providing port-level VLAN control and status information for all ports.
.1.3.6.1.2.1.17.7.2.2,Q-BRIDGE-MIB::qBridgeCompliances,,,,,,
.1.3.6.1.2.1.17.7.2.2.1,Q-BRIDGE-MIB::qBridgeCompliance,,,,,,The compliance statement for device support of Virtual LAN Bridge services. RFC2674 was silent about the expected persistence of the read-write objects in this MIB module. Applications MUST NOT assume that the values of the read-write objects are persistent across reinitializations of the management system and MUST NOT assume that the values are not persistent across reinitializations of the management system.
.1.3.6.1.2.1.17.7.2.2.2,Q-BRIDGE-MIB::qBridgeCompliance2,,,,,,The compliance statement for device support of Virtual LAN Bridge services. This document clarifies the persistence requirements for the read-write objects in this MIB module. All implementations claiming compliance to qBridgeCompliance2 MUST retain the values of those read-write objects that specify this requirement.
.1.3.6.1.2.1.17.8,BRIDGE-MIB::dot1dConformance,,,,,,
.1.3.6.1.2.1.17.8.1,BRIDGE-MIB::dot1dGroups,,,,,,
.1.3.6.1.2.1.17.8.1.1,BRIDGE-MIB::dot1dBaseBridgeGroup,,,,,,Bridge level information for this device.
.1.3.6.1.2.1.17.8.1.2,BRIDGE-MIB::dot1dBasePortGroup,,,,,,Information for each port on this device.
.1.3.6.1.2.1.17.8.1.3,BRIDGE-MIB::dot1dStpBridgeGroup,,,,,,Bridge level Spanning Tree data for this device.
.1.3.6.1.2.1.17.8.1.4,BRIDGE-MIB::dot1dStpPortGroup,,,,,,Spanning Tree data for each port on this device.
.1.3.6.1.2.1.17.8.1.5,BRIDGE-MIB::dot1dStpPortGroup2,,,,,,Spanning Tree data for each port on this device.
.1.3.6.1.2.1.17.8.1.6,BRIDGE-MIB::dot1dStpPortGroup3,,,,,,Spanning Tree data for devices supporting 32-bit path costs.
.1.3.6.1.2.1.17.8.1.7,BRIDGE-MIB::dot1dTpBridgeGroup,,,,,,Bridge level Transparent Bridging data.
.1.3.6.1.2.1.17.8.1.8,BRIDGE-MIB::dot1dTpFdbGroup,,,,,,Filtering Database information for the Bridge.
.1.3.6.1.2.1.17.8.1.9,BRIDGE-MIB::dot1dTpGroup,,,,,,Dynamic Filtering Database information for each port of the Bridge.
.1.3.6.1.2.1.17.8.1.10,BRIDGE-MIB::dot1dStaticGroup,,,,,,Static Filtering Database information for each port of the Bridge.
.1.3.6.1.2.1.17.8.1.11,BRIDGE-MIB::dot1dNotificationGroup,,,,,,Group of objects describing notifications (traps).
.1.3.6.1.2.1.17.8.2,BRIDGE-MIB::dot1dCompliances,,,,,,
.1.3.6.1.2.1.17.8.2.1,BRIDGE-MIB::bridgeCompliance1493,,,,,,The compliance statement for device support of bridging services, as per RFC1493.
.1.3.6.1.2.1.17.8.2.2,BRIDGE-MIB::bridgeCompliance4188,,,,,,The compliance statement for device support of bridging services. This supports 32-bit Path Cost values and the more restricted bridge and port priorities, as per IEEE 802.1t. Full support for the 802.1D management objects requires that the SNMPv2-MIB [RFC3418] objects sysDescr, and sysUpTime, as well as the IF-MIB [RFC2863] objects ifIndex, ifType, ifDescr, ifPhysAddress, and ifLastChange are implemented.
.1.3.6.1.2.1.23,RIPv2-MIB::rip2,,,,,,The MIB module to describe the RIP2 Version 2 Protocol
.1.3.6.1.2.1.23.1,RIPv2-MIB::rip2Globals,,,,,,
.1.3.6.1.2.1.23.1.1,RIPv2-MIB::rip2GlobalRouteChanges,Counter32,read-only,,current,,The number of route changes made to the IP Route Database by RIP. This does not include the refresh of a route's age.
.1.3.6.1.2.1.23.1.2,RIPv2-MIB::rip2GlobalQueries,Counter32,read-only,,current,,The number of responses sent to RIP queries from other systems.
.1.3.6.1.2.1.23.2,RIPv2-MIB::rip2IfStatTable,,not-accessible,,current,,A list of subnets which require separate status monitoring in RIP.
.1.3.6.1.2.1.23.2.1,RIPv2-MIB::rip2IfStatEntry,,not-accessible,rip2IfStatAddress,current,,A Single Routing Domain in a single Subnet.
.1.3.6.1.2.1.23.2.1.1,RIPv2-MIB::rip2IfStatAddress,IpAddress,read-only,,current,,The IP Address of this system on the indicated subnet. For unnumbered interfaces, the value 0.0.0.N, where the least significant 24 bits (N) is the ifIndex for the IP Interface in network byte order.
.1.3.6.1.2.1.23.2.1.2,RIPv2-MIB::rip2IfStatRcvBadPackets,Counter32,read-only,,current,,The number of RIP response packets received by the RIP process which were subsequently discarded for any reason (e.g. a version 0 packet, or an unknown command type).
.1.3.6.1.2.1.23.2.1.3,RIPv2-MIB::rip2IfStatRcvBadRoutes,Counter32,read-only,,current,,The number of routes, in valid RIP packets, which were ignored for any reason (e.g. unknown address family, or invalid metric).
.1.3.6.1.2.1.23.2.1.4,RIPv2-MIB::rip2IfStatSentUpdates,Counter32,read-only,,current,,The number of triggered RIP updates actually sent on this interface. This explicitly does NOT include full updates sent containing new information.
.1.3.6.1.2.1.23.2.1.5,RIPv2-MIB::rip2IfStatStatus,INTEGER,read-create,,current,active(1):notInService(2):notReady(3):createAndGo(4):createAndWait(5):destroy(6),Writing invalid has the effect of deleting this interface.
.1.3.6.1.2.1.23.3,RIPv2-MIB::rip2IfConfTable,,not-accessible,,current,,A list of subnets which require separate configuration in RIP.
.1.3.6.1.2.1.23.3.1,RIPv2-MIB::rip2IfConfEntry,,not-accessible,rip2IfConfAddress,current,,A Single Routing Domain in a single Subnet.
.1.3.6.1.2.1.23.3.1.1,RIPv2-MIB::rip2IfConfAddress,IpAddress,read-only,,current,,The IP Address of this system on the indicated subnet. For unnumbered interfaces, the value 0.0.0.N, where the least significant 24 bits (N) is the ifIndex for the IP Interface in network byte order.
.1.3.6.1.2.1.23.3.1.2,RIPv2-MIB::rip2IfConfDomain,OCTET,read-create,,obsolete,,Value inserted into the Routing Domain field of all RIP packets sent on this interface.
.1.3.6.1.2.1.23.3.1.3,RIPv2-MIB::rip2IfConfAuthType,INTEGER,read-create,,current,noAuthentication(1):simplePassword(2):md5(3),The type of Authentication used on this interface.
.1.3.6.1.2.1.23.3.1.4,RIPv2-MIB::rip2IfConfAuthKey,OCTET,read-create,,current,,The value to be used as the Authentication Key whenever the corresponding instance of rip2IfConfAuthType has a value other than noAuthentication. A modification of the corresponding instance of rip2IfConfAuthType does not modify the rip2IfConfAuthKey value. If a string shorter than 16 octets is supplied, it will be left- justified and padded to 16 octets, on the right, with nulls (0x00). Reading this object always results in an OCTET STRING of length zero; authentication may not be bypassed by reading the MIB object.
.1.3.6.1.2.1.23.3.1.5,RIPv2-MIB::rip2IfConfSend,INTEGER,read-create,,current,doNotSend(1):ripVersion1(2):rip1Compatible(3):ripVersion2(4):ripV1Demand(5):ripV2Demand(6),What the router sends on this interface. ripVersion1 implies sending RIP updates compliant with RFC 1058. rip1Compatible implies broadcasting RIP-2 updates using RFC 1058 route subsumption rules. ripVersion2 implies multicasting RIP-2 updates. ripV1Demand indicates the use of Demand RIP on a WAN interface under RIP Version 1 rules. ripV2Demand indicates the use of Demand RIP on a WAN interface under Version 2 rules.
.1.3.6.1.2.1.23.3.1.6,RIPv2-MIB::rip2IfConfReceive,INTEGER,read-create,,current,rip1(1):rip2(2):rip1OrRip2(3):doNotRecieve(4),This indicates which version of RIP updates are to be accepted. Note that rip2 and rip1OrRip2 implies reception of multicast packets.
.1.3.6.1.2.1.23.3.1.7,RIPv2-MIB::rip2IfConfDefaultMetric,INTEGER,read-create,,current,,This variable indicates the metric that is to be used for the default route entry in RIP updates originated on this interface. A value of zero indicates that no default route should be originated; in this case, a default route via another router may be propagated.
.1.3.6.1.2.1.23.3.1.8,RIPv2-MIB::rip2IfConfStatus,INTEGER,read-create,,current,active(1):notInService(2):notReady(3):createAndGo(4):createAndWait(5):destroy(6),Writing invalid has the effect of deleting this interface.
.1.3.6.1.2.1.23.3.1.9,RIPv2-MIB::rip2IfConfSrcAddress,IpAddress,read-create,,current,,The IP Address this system will use as a source address on this interface. If it is a numbered interface, this MUST be the same value as rip2IfConfAddress. On unnumbered interfaces, it must be the value of rip2IfConfAddress for some interface on the system.
.1.3.6.1.2.1.23.4,RIPv2-MIB::rip2PeerTable,,not-accessible,,current,,A list of RIP Peers.
.1.3.6.1.2.1.23.4.1,RIPv2-MIB::rip2PeerEntry,,not-accessible,rip2PeerAddress:rip2PeerDomain,current,,Information regarding a single routing peer.
.1.3.6.1.2.1.23.4.1.1,RIPv2-MIB::rip2PeerAddress,IpAddress,read-only,,current,,The IP Address that the peer is using as its source address. Note that on an unnumbered link, this may not be a member of any subnet on the system.
.1.3.6.1.2.1.23.4.1.2,RIPv2-MIB::rip2PeerDomain,OCTET,read-only,,current,,The value in the Routing Domain field in RIP packets received from the peer. As domain suuport is deprecated, this must be zero.
.1.3.6.1.2.1.23.4.1.3,RIPv2-MIB::rip2PeerLastUpdate,TimeTicks,read-only,,current,,The value of sysUpTime when the most recent RIP update was received from this system.
.1.3.6.1.2.1.23.4.1.4,RIPv2-MIB::rip2PeerVersion,INTEGER,read-only,,current,,The RIP version number in the header of the last RIP packet received.
.1.3.6.1.2.1.23.4.1.5,RIPv2-MIB::rip2PeerRcvBadPackets,Counter32,read-only,,current,,The number of RIP response packets from this peer discarded as invalid.
.1.3.6.1.2.1.23.4.1.6,RIPv2-MIB::rip2PeerRcvBadRoutes,Counter32,read-only,,current,,The number of routes from this peer that were ignored because the entry format was invalid.
.1.3.6.1.2.1.23.5,RIPv2-MIB::rip2Conformance,,,,,,
.1.3.6.1.2.1.23.5.1,RIPv2-MIB::rip2Groups,,,,,,
.1.3.6.1.2.1.23.5.1.1,RIPv2-MIB::rip2GlobalGroup,,,,,,This group defines global controls for RIP-II systems.
.1.3.6.1.2.1.23.5.1.2,RIPv2-MIB::rip2IfStatGroup,,,,,,This group defines interface statistics for RIP-II systems.
.1.3.6.1.2.1.23.5.1.3,RIPv2-MIB::rip2IfConfGroup,,,,,,This group defines interface configuration for RIP-II systems.
.1.3.6.1.2.1.23.5.1.4,RIPv2-MIB::rip2PeerGroup,,,,,,This group defines peer information for RIP-II systems.
.1.3.6.1.2.1.23.5.2,RIPv2-MIB::rip2Compliances,,,,,,
.1.3.6.1.2.1.23.5.2.1,RIPv2-MIB::rip2Compliance,,,,,,The compliance statement 
.1.3.6.1.2.1.30,IANAifType-MIB::ianaifType,,,,,,This MIB module defines the IANAifType Textual Convention, and thus the enumerated values of the ifType object defined in MIB-II's ifTable.
.1.3.6.1.2.1.31,IF-MIB::ifMIB,,,,,,The MIB module to describe generic objects for network interface sub-layers. This MIB is an updated version of MIB-II's ifTable, and incorporates the extensions defined in RFC 1229.
.1.3.6.1.2.1.31.1,IF-MIB::ifMIBObjects,,,,,,
.1.3.6.1.2.1.31.1.1,IF-MIB::ifXTable,,not-accessible,,current,,A list of interface entries. The number of entries is given by the value of ifNumber. This table contains additional objects for the interface table.
.1.3.6.1.2.1.31.1.1.1,IF-MIB::ifXEntry,,not-accessible,,current,,An entry containing additional management information applicable to a particular interface.
.1.3.6.1.2.1.31.1.1.1.1,IF-MIB::ifName,OCTET,read-only,,current,,The textual name of the interface. The value of this object should be the name of the interface as assigned by the local device and should be suitable for use in commands entered at the device's `console'. This might be a text name, such as `le0' or a simple port number, such as `1', depending on the interface naming syntax of the device. If several entries in the ifTable together represent a single interface as named by the device, then each will have the same value of ifName. Note that for an agent which responds to SNMP queries concerning an interface on some other (proxied) device, then the value of ifName for such an interface is the proxied device's local name for it. If there is no local name, or this object is otherwise not applicable, then this object contains a zero-length string.
.1.3.6.1.2.1.31.1.1.1.2,IF-MIB::ifInMulticastPkts,Counter32,read-only,,current,,The number of packets, delivered by this sub-layer to a higher (sub-)layer, which were addressed to a multicast address at this sub-layer. For a MAC layer protocol, this includes both Group and Functional addresses. Discontinuities in the value of this counter can occur at re-initialization of the management system, and at other times as indicated by the value of ifCounterDiscontinuityTime.
.1.3.6.1.2.1.31.1.1.1.3,IF-MIB::ifInBroadcastPkts,Counter32,read-only,,current,,The number of packets, delivered by this sub-layer to a higher (sub-)layer, which were addressed to a broadcast address at this sub-layer. Discontinuities in the value of this counter can occur at re-initialization of the management system, and at other times as indicated by the value of ifCounterDiscontinuityTime.
.1.3.6.1.2.1.31.1.1.1.4,IF-MIB::ifOutMulticastPkts,Counter32,read-only,,current,,The total number of packets that higher-level protocols requested be transmitted, and which were addressed to a multicast address at this sub-layer, including those that were discarded or not sent. For a MAC layer protocol, this includes both Group and Functional addresses. Discontinuities in the value of this counter can occur at re-initialization of the management system, and at other times as indicated by the value of ifCounterDiscontinuityTime.
.1.3.6.1.2.1.31.1.1.1.5,IF-MIB::ifOutBroadcastPkts,Counter32,read-only,,current,,The total number of packets that higher-level protocols requested be transmitted, and which were addressed to a broadcast address at this sub-layer, including those that were discarded or not sent. Discontinuities in the value of this counter can occur at re-initialization of the management system, and at other times as indicated by the value of ifCounterDiscontinuityTime.
.1.3.6.1.2.1.31.1.1.1.6,IF-MIB::ifHCInOctets,Counter64,read-only,,current,,The total number of octets received on the interface, including framing characters. This object is a 64-bit version of ifInOctets. Discontinuities in the value of this counter can occur at re-initialization of the management system, and at other times as indicated by the value of ifCounterDiscontinuityTime.
.1.3.6.1.2.1.31.1.1.1.7,IF-MIB::ifHCInUcastPkts,Counter64,read-only,,current,,The number of packets, delivered by this sub-layer to a higher (sub-)layer, which were not addressed to a multicast or broadcast address at this sub-layer. This object is a 64-bit version of ifInUcastPkts. Discontinuities in the value of this counter can occur at re-initialization of the management system, and at other times as indicated by the value of ifCounterDiscontinuityTime.
.1.3.6.1.2.1.31.1.1.1.8,IF-MIB::ifHCInMulticastPkts,Counter64,read-only,,current,,The number of packets, delivered by this sub-layer to a higher (sub-)layer, which were addressed to a multicast address at this sub-layer. For a MAC layer protocol, this includes both Group and Functional addresses. This object is a 64-bit version of ifInMulticastPkts. Discontinuities in the value of this counter can occur at re-initialization of the management system, and at other times as indicated by the value of ifCounterDiscontinuityTime.
.1.3.6.1.2.1.31.1.1.1.9,IF-MIB::ifHCInBroadcastPkts,Counter64,read-only,,current,,The number of packets, delivered by this sub-layer to a higher (sub-)layer, which were addressed to a broadcast address at this sub-layer. This object is a 64-bit version of ifInBroadcastPkts. Discontinuities in the value of this counter can occur at re-initialization of the management system, and at other times as indicated by the value of ifCounterDiscontinuityTime.
.1.3.6.1.2.1.31.1.1.1.10,IF-MIB::ifHCOutOctets,Counter64,read-only,,current,,The total number of octets transmitted out of the interface, including framing characters. This object is a 64-bit version of ifOutOctets. Discontinuities in the value of this counter can occur at re-initialization of the management system, and at other times as indicated by the value of ifCounterDiscontinuityTime.
.1.3.6.1.2.1.31.1.1.1.11,IF-MIB::ifHCOutUcastPkts,Counter64,read-only,,current,,The total number of packets that higher-level protocols requested be transmitted, and which were not addressed to a multicast or broadcast address at this sub-layer, including those that were discarded or not sent. This object is a 64-bit version of ifOutUcastPkts. Discontinuities in the value of this counter can occur at re-initialization of the management system, and at other times as indicated by the value of ifCounterDiscontinuityTime.
.1.3.6.1.2.1.31.1.1.1.12,IF-MIB::ifHCOutMulticastPkts,Counter64,read-only,,current,,The total number of packets that higher-level protocols requested be transmitted, and which were addressed to a multicast address at this sub-layer, including those that were discarded or not sent. For a MAC layer protocol, this includes both Group and Functional addresses. This object is a 64-bit version of ifOutMulticastPkts. Discontinuities in the value of this counter can occur at re-initialization of the management system, and at other times as indicated by the value of ifCounterDiscontinuityTime.
.1.3.6.1.2.1.31.1.1.1.13,IF-MIB::ifHCOutBroadcastPkts,Counter64,read-only,,current,,The total number of packets that higher-level protocols requested be transmitted, and which were addressed to a broadcast address at this sub-layer, including those that were discarded or not sent. This object is a 64-bit version of ifOutBroadcastPkts. Discontinuities in the value of this counter can occur at re-initialization of the management system, and at other times as indicated by the value of ifCounterDiscontinuityTime.
.1.3.6.1.2.1.31.1.1.1.14,IF-MIB::ifLinkUpDownTrapEnable,INTEGER,read-write,,current,enabled(1):disabled(2),Indicates whether linkUp/linkDown traps should be generated for this interface. By default, this object should have the value enabled(1) for interfaces which do not operate on 'top' of any other interface (as defined in the ifStackTable), and disabled(2) otherwise.
.1.3.6.1.2.1.31.1.1.1.15,IF-MIB::ifHighSpeed,Gauge32,read-only,,current,,An estimate of the interface's current bandwidth in units of 1,000,000 bits per second. If this object reports a value of `n' then the speed of the interface is somewhere in the range of `n-500,000' to `n+499,999'. For interfaces which do not vary in bandwidth or for those where no accurate estimation can be made, this object should contain the nominal bandwidth. For a sub-layer which has no concept of bandwidth, this object should be zero.
.1.3.6.1.2.1.31.1.1.1.16,IF-MIB::ifPromiscuousMode,INTEGER,read-write,,current,true(1):false(2),This object has a value of false(2) if this interface only accepts packets/frames that are addressed to this station. This object has a value of true(1) when the station accepts all packets/frames transmitted on the media. The value true(1) is only legal on certain types of media. If legal, setting this object to a value of true(1) may require the interface to be reset before becoming effective. The value of ifPromiscuousMode does not affect the reception of broadcast and multicast packets/frames by the interface.
.1.3.6.1.2.1.31.1.1.1.17,IF-MIB::ifConnectorPresent,INTEGER,read-only,,current,true(1):false(2),This object has the value 'true(1)' if the interface sublayer has a physical connector and the value 'false(2)' otherwise.
.1.3.6.1.2.1.31.1.1.1.18,IF-MIB::ifAlias,OCTET,read-write,,current,,This object is an 'alias' name for the interface as specified by a network manager, and provides a non-volatile 'handle' for the interface. On the first instantiation of an interface, the value of ifAlias associated with that interface is the zero-length string. As and when a value is written into an instance of ifAlias through a network management set operation, then the agent must retain the supplied value in the ifAlias instance associated with the same interface for as long as that interface remains instantiated, including across all re- initializations/reboots of the network management system, including those which result in a change of the interface's ifIndex value. An example of the value which a network manager might store in this object for a WAN interface is the (Telco's) circuit number/identifier of the interface. Some agents may support write-access only for interfaces having particular values of ifType. An agent which supports write access to this object is required to keep the value in non-volatile storage, but it may limit the length of new values depending on how much storage is already occupied by the current values for other interfaces.
.1.3.6.1.2.1.31.1.1.1.19,IF-MIB::ifCounterDiscontinuityTime,TimeTicks,read-only,,current,,The value of sysUpTime on the most recent occasion at which any one or more of this interface's counters suffered a discontinuity. The relevant counters are the specific instances associated with this interface of any Counter32 or Counter64 object contained in the ifTable or ifXTable. If no such discontinuities have occurred since the last re- initialization of the local management subsystem, then this object contains a zero value.
.1.3.6.1.2.1.31.1.2,IF-MIB::ifStackTable,,not-accessible,,current,,The table containing information on the relationships between the multiple sub-layers of network interfaces. In particular, it contains information on which sub-layers run 'on top of' which other sub-layers, where each sub-layer corresponds to a conceptual row in the ifTable. For example, when the sub-layer with ifIndex value x runs over the sub-layer with ifIndex value y, then this table contains: ifStackStatus.x.y=active For each ifIndex value, I, which identifies an active interface, there are always at least two instantiated rows in this table associated with I. For one of these rows, I is the value of ifStackHigherLayer; for the other, I is the value of ifStackLowerLayer. (If I is not involved in multiplexing, then these are the only two rows associated with I.) For example, two rows exist even for an interface which has no others stacked on top or below it: ifStackStatus.0.x=active ifStackStatus.x.0=active 
.1.3.6.1.2.1.31.1.2.1,IF-MIB::ifStackEntry,,not-accessible,ifStackHigherLayer:ifStackLowerLayer,current,,Information on a particular relationship between two sub- layers, specifying that one sub-layer runs on 'top' of the other sub-layer. Each sub-layer corresponds to a conceptual row in the ifTable.
.1.3.6.1.2.1.31.1.2.1.1,IF-MIB::ifStackHigherLayer,Integer32,not-accessible,,current,,The value of ifIndex corresponding to the higher sub-layer of the relationship, i.e., the sub-layer which runs on 'top' of the sub-layer identified by the corresponding instance of ifStackLowerLayer. If there is no higher sub-layer (below the internetwork layer), then this object has the value 0.
.1.3.6.1.2.1.31.1.2.1.2,IF-MIB::ifStackLowerLayer,Integer32,not-accessible,,current,,The value of ifIndex corresponding to the lower sub-layer of the relationship, i.e., the sub-layer which runs 'below' the sub-layer identified by the corresponding instance of ifStackHigherLayer. If there is no lower sub-layer, then this object has the value 0.
.1.3.6.1.2.1.31.1.2.1.3,IF-MIB::ifStackStatus,INTEGER,read-create,,current,active(1):notInService(2):notReady(3):createAndGo(4):createAndWait(5):destroy(6),The status of the relationship between two sub-layers. Changing the value of this object from 'active' to 'notInService' or 'destroy' will likely have consequences up and down the interface stack. Thus, write access to this object is likely to be inappropriate for some types of interfaces, and many implementations will choose not to support write-access for any type of interface.
.1.3.6.1.2.1.31.1.3,IF-MIB::ifTestTable,,not-accessible,,deprecated,,This table contains one entry per interface. It defines objects which allow a network manager to instruct an agent to test an interface for various faults. Tests for an interface are defined in the media-specific MIB for that interface. After invoking a test, the object ifTestResult can be read to determine the outcome. If an agent can not perform the test, ifTestResult is set to so indicate. The object ifTestCode can be used to provide further test- specific or interface-specific (or even enterprise-specific) information concerning the outcome of the test. Only one test can be in progress on each interface at any one time. If one test is in progress when another test is invoked, the second test is rejected. Some agents may reject a test when a prior test is active on another interface. Before starting a test, a manager-station must first obtain 'ownership' of the entry in the ifTestTable for the interface to be tested. This is accomplished with the ifTestId and ifTestStatus objects as follows: try_again: get (ifTestId, ifTestStatus) while (ifTestStatus != notInUse) /* * Loop while a test is running or some other * manager is configuring a test. */ short delay get (ifTestId, ifTestStatus) } /* * Is not being used right now -- let's compete * to see who gets it. */ lock_value = ifTestId if ( set(ifTestId = lock_value, ifTestStatus = inUse, ifTestOwner = 'my-IP-address') == FAILURE) /* * Another manager got the ifTestEntry -- go * try again */ goto try_again; /* * I have the lock */ set up any test parameters. /* * This starts the test */ set(ifTestType = test_to_run); wait for test completion by polling ifTestResult when test completes, agent sets ifTestResult agent also sets ifTestStatus = 'notInUse' retrieve any additional test results, and ifTestId if (ifTestId == lock_value+1) results are valid A manager station first retrieves the value of the appropriate ifTestId and ifTestStatus objects, periodically repeating the retrieval if necessary, until the value of ifTestStatus is 'notInUse'. The manager station then tries to set the same ifTestId object to the value it just retrieved, the same ifTestStatus object to 'inUse', and the corresponding ifTestOwner object to a value indicating itself. If the set operation succeeds then the manager has obtained ownership of the ifTestEntry, and the value of the ifTestId object is incremented by the agent (per the semantics of TestAndIncr). Failure of the set operation indicates that some other manager has obtained ownership of the ifTestEntry. Once ownership is obtained, any test parameters can be setup, and then the test is initiated by setting ifTestType. On completion of the test, the agent sets ifTestStatus to 'notInUse'. Once this occurs, the manager can retrieve the results. In the (rare) event that the invocation of tests by two network managers were to overlap, then there would be a possibility that the first test's results might be overwritten by the second test's results prior to the first results being read. This unlikely circumstance ca
.1.3.6.1.2.1.31.1.3.1,IF-MIB::ifTestEntry,,not-accessible,,deprecated,,An entry containing objects for invoking tests on an interface.
.1.3.6.1.2.1.31.1.3.1.1,IF-MIB::ifTestId,INTEGER,read-write,,deprecated,,This object identifies the current invocation of the interface's test.
.1.3.6.1.2.1.31.1.3.1.2,IF-MIB::ifTestStatus,INTEGER,read-write,,deprecated,notInUse(1):inUse(2),This object indicates whether or not some manager currently has the necessary 'ownership' required to invoke a test on this interface. A write to this object is only successful when it changes its value from 'notInUse(1)' to 'inUse(2)'. After completion of a test, the agent resets the value back to 'notInUse(1)'.
.1.3.6.1.2.1.31.1.3.1.3,IF-MIB::ifTestType,OBJECT,read-write,,deprecated,,A control variable used to start and stop operator- initiated interface tests. Most OBJECT IDENTIFIER values assigned to tests are defined elsewhere, in association with specific types of interface. However, this document assigns a value for a full-duplex loopback test, and defines the special meanings of the subject identifier: noTest OBJECT IDENTIFIER ::= { 0 0 } When the value noTest is written to this object, no action is taken unless a test is in progress, in which case the test is aborted. Writing any other value to this object is only valid when no test is currently in progress, in which case the indicated test is initiated. When read, this object always returns the most recent value that ifTestType was set to. If it has not been set since the last initialization of the network management subsystem on the agent, a value of noTest is returned.
.1.3.6.1.2.1.31.1.3.1.4,IF-MIB::ifTestResult,INTEGER,read-only,,deprecated,none(1):success(2):inProgress(3):notSupported(4):unAbleToRun(5):aborted(6):failed(7),This object contains the result of the most recently requested test, or the value none(1) if no tests have been requested since the last reset. Note that this facility provides no provision for saving the results of one test when starting another, as could be required if used by multiple managers concurrently.
.1.3.6.1.2.1.31.1.3.1.5,IF-MIB::ifTestCode,OBJECT,read-only,,deprecated,,This object contains a code which contains more specific information on the test result, for example an error-code after a failed test. Error codes and other values this object may take are specific to the type of interface and/or test. The value may have the semantics of either the AutonomousType or InstancePointer textual conventions as defined in RFC 2579. The identifier: testCodeUnknown OBJECT IDENTIFIER ::= { 0 0 } is defined for use if no additional result code is available.
.1.3.6.1.2.1.31.1.3.1.6,IF-MIB::ifTestOwner,OCTET,read-write,,deprecated,,The entity which currently has the 'ownership' required to invoke a test on this interface.
.1.3.6.1.2.1.31.1.4,IF-MIB::ifRcvAddressTable,,not-accessible,,current,,This table contains an entry for each address (broadcast, multicast, or uni-cast) for which the system will receive packets/frames on a particular interface, except as follows: - for an interface operating in promiscuous mode, entries are only required for those addresses for which the system would receive frames were it not operating in promiscuous mode. - for 802.5 functional addresses, only one entry is required, for the address which has the functional address bit ANDed with the bit mask of all functional addresses for which the interface will accept frames. A system is normally able to use any unicast address which corresponds to an entry in this table as a source address.
.1.3.6.1.2.1.31.1.4.1,IF-MIB::ifRcvAddressEntry,,not-accessible,ifIndex:ifRcvAddressAddress,current,,A list of objects identifying an address for which the system will accept packets/frames on the particular interface identified by the index value ifIndex.
.1.3.6.1.2.1.31.1.4.1.1,IF-MIB::ifRcvAddressAddress,OCTET,not-accessible,,current,,An address for which the system will accept packets/frames on this entry's interface.
.1.3.6.1.2.1.31.1.4.1.2,IF-MIB::ifRcvAddressStatus,INTEGER,read-create,,current,active(1):notInService(2):notReady(3):createAndGo(4):createAndWait(5):destroy(6),This object is used to create and delete rows in the ifRcvAddressTable.
.1.3.6.1.2.1.31.1.4.1.3,IF-MIB::ifRcvAddressType,INTEGER,read-create,,current,other(1):volatile(2):nonVolatile(3),This object has the value nonVolatile(3) for those entries in the table which are valid and will not be deleted by the next restart of the managed system. Entries having the value volatile(2) are valid and exist, but have not been saved, so that will not exist after the next restart of the managed system. Entries having the value other(1) are valid and exist but are not classified as to whether they will continue to exist after the next restart.
.1.3.6.1.2.1.31.1.5,IF-MIB::ifTableLastChange,TimeTicks,read-only,,current,,The value of sysUpTime at the time of the last creation or deletion of an entry in the ifTable. If the number of entries has been unchanged since the last re-initialization of the local network management subsystem, then this object contains a zero value.
.1.3.6.1.2.1.31.1.6,IF-MIB::ifStackLastChange,TimeTicks,read-only,,current,,The value of sysUpTime at the time of the last change of the (whole) interface stack. A change of the interface stack is defined to be any creation, deletion, or change in value of any instance of ifStackStatus. If the interface stack has been unchanged since the last re-initialization of the local network management subsystem, then this object contains a zero value.
.1.3.6.1.2.1.31.2,IF-MIB::ifConformance,,,,,,
.1.3.6.1.2.1.31.2.1,IF-MIB::ifGroups,,,,,,
.1.3.6.1.2.1.31.2.1.1,IF-MIB::ifGeneralGroup,,,,,,A collection of objects deprecated in favour of ifGeneralInformationGroup.
.1.3.6.1.2.1.31.2.1.2,IF-MIB::ifFixedLengthGroup,,,,,,A collection of objects providing information specific to non-high speed (non-high speed interfaces transmit and receive at speeds less than or equal to 20,000,000 bits/second) character-oriented or fixed-length-transmission network interfaces.
.1.3.6.1.2.1.31.2.1.3,IF-MIB::ifHCFixedLengthGroup,,,,,,A collection of objects providing information specific to high speed (greater than 20,000,000 bits/second) character- oriented or fixed-length-transmission network interfaces.
.1.3.6.1.2.1.31.2.1.4,IF-MIB::ifPacketGroup,,,,,,A collection of objects providing information specific to non-high speed (non-high speed interfaces transmit and receive at speeds less than or equal to 20,000,000 bits/second) packet-oriented network interfaces.
.1.3.6.1.2.1.31.2.1.5,IF-MIB::ifHCPacketGroup,,,,,,A collection of objects providing information specific to high speed (greater than 20,000,000 bits/second but less than or equal to 650,000,000 bits/second) packet-oriented network interfaces.
.1.3.6.1.2.1.31.2.1.6,IF-MIB::ifVHCPacketGroup,,,,,,A collection of objects providing information specific to higher speed (greater than 650,000,000 bits/second) packet- oriented network interfaces.
.1.3.6.1.2.1.31.2.1.7,IF-MIB::ifRcvAddressGroup,,,,,,A collection of objects providing information on the multiple addresses which an interface receives.
.1.3.6.1.2.1.31.2.1.8,IF-MIB::ifTestGroup,,,,,,A collection of objects providing the ability to invoke tests on an interface.
.1.3.6.1.2.1.31.2.1.9,IF-MIB::ifStackGroup,,,,,,The previous collection of objects providing information on the layering of MIB-II interfaces.
.1.3.6.1.2.1.31.2.1.10,IF-MIB::ifGeneralInformationGroup,,,,,,A collection of objects providing information applicable to all network interfaces.
.1.3.6.1.2.1.31.2.1.11,IF-MIB::ifStackGroup2,,,,,,A collection of objects providing information on the layering of MIB-II interfaces.
.1.3.6.1.2.1.31.2.1.12,IF-MIB::ifOldObjectsGroup,,,,,,The collection of objects deprecated from the original MIB- II interfaces group.
.1.3.6.1.2.1.31.2.1.13,IF-MIB::ifCounterDiscontinuityGroup,,,,,,A collection of objects providing information specific to interface counter discontinuities.
.1.3.6.1.2.1.31.2.1.14,IF-MIB::linkUpDownNotificationsGroup,,,,,,The notifications which indicate specific changes in the value of ifOperStatus.
.1.3.6.1.2.1.31.2.2,IF-MIB::ifCompliances,,,,,,
.1.3.6.1.2.1.31.2.2.1,IF-MIB::ifCompliance,,,,,,A compliance statement defined in a previous version of this MIB module, for SNMP entities which have network interfaces.
.1.3.6.1.2.1.31.2.2.2,IF-MIB::ifCompliance2,,,,,,A compliance statement defined in a previous version of this MIB module, for SNMP entities which have network interfaces.
.1.3.6.1.2.1.31.2.2.3,IF-MIB::ifCompliance3,,,,,,The compliance statement for SNMP entities which have network interfaces.
.1.3.6.1.2.1.52,INTEGRATED-SERVICES-MIB::intSrv,,,,,,The MIB module to describe the Integrated Services Protocol
.1.3.6.1.2.1.52.1,INTEGRATED-SERVICES-MIB::intSrvObjects,,,,,,
.1.3.6.1.2.1.52.1.1,INTEGRATED-SERVICES-MIB::intSrvIfAttribTable,,not-accessible,,current,,The reservable attributes of the system's in- terfaces.
.1.3.6.1.2.1.52.1.1.1,INTEGRATED-SERVICES-MIB::intSrvIfAttribEntry,,not-accessible,ifIndex,current,,The reservable attributes of a given inter- face.
.1.3.6.1.2.1.52.1.1.1.1,INTEGRATED-SERVICES-MIB::intSrvIfAttribAllocatedBits,INTEGER,read-only,,current,,The number of bits/second currently allocated to reserved sessions on the interface.
.1.3.6.1.2.1.52.1.1.1.2,INTEGRATED-SERVICES-MIB::intSrvIfAttribMaxAllocatedBits,INTEGER,read-create,,current,,The maximum number of bits/second that may be allocated to reserved sessions on the inter- face.
.1.3.6.1.2.1.52.1.1.1.3,INTEGRATED-SERVICES-MIB::intSrvIfAttribAllocatedBuffer,INTEGER,read-only,,current,,The amount of buffer space required to hold the simultaneous burst of all reserved flows on the interface.
.1.3.6.1.2.1.52.1.1.1.4,INTEGRATED-SERVICES-MIB::intSrvIfAttribFlows,Gauge32,read-only,,current,,The number of reserved flows currently active on this interface. A flow can be created ei- ther from a reservation protocol (such as RSVP or ST-II) or via configuration information.
.1.3.6.1.2.1.52.1.1.1.5,INTEGRATED-SERVICES-MIB::intSrvIfAttribPropagationDelay,Integer32,read-create,,current,,The amount of propagation delay that this in- terface introduces in addition to that intro- diced by bit propagation delays.
.1.3.6.1.2.1.52.1.1.1.6,INTEGRATED-SERVICES-MIB::intSrvIfAttribStatus,INTEGER,read-create,,current,active(1):notInService(2):notReady(3):createAndGo(4):createAndWait(5):destroy(6),'active' on interfaces that are configured for RSVP.
.1.3.6.1.2.1.52.1.2,INTEGRATED-SERVICES-MIB::intSrvFlowTable,,not-accessible,,current,,Information describing the reserved flows us- ing the system's interfaces.
.1.3.6.1.2.1.52.1.2.1,INTEGRATED-SERVICES-MIB::intSrvFlowEntry,,not-accessible,intSrvFlowNumber,current,,Information describing the use of a given in- terface by a given flow. The counter intSrvFlowPoliced starts counting at the in- stallation of the flow.
.1.3.6.1.2.1.52.1.2.1.1,INTEGRATED-SERVICES-MIB::intSrvFlowNumber,INTEGER,not-accessible,,current,,The number of this flow. This is for SNMP In- dexing purposes only and has no relation to any protocol value.
.1.3.6.1.2.1.52.1.2.1.2,INTEGRATED-SERVICES-MIB::intSrvFlowType,INTEGER,read-create,,current,,The type of session (IP4, IP6, IP6 with flow information, etc).
.1.3.6.1.2.1.52.1.2.1.3,INTEGRATED-SERVICES-MIB::intSrvFlowOwner,INTEGER,read-create,,current,other(1):rsvp(2):management(3),The process that installed this flow in the queue policy database.
.1.3.6.1.2.1.52.1.2.1.4,INTEGRATED-SERVICES-MIB::intSrvFlowDestAddr,OCTET,read-create,,current,,The destination address used by all senders in this session. This object may not be changed when the value of the RowStatus object is 'ac- tive'.
.1.3.6.1.2.1.52.1.2.1.5,INTEGRATED-SERVICES-MIB::intSrvFlowSenderAddr,OCTET,read-create,,current,,The source address of the sender selected by this reservation. The value of all zeroes in- dicates 'all senders'. This object may not be changed when the value of the RowStatus object is 'active'.
.1.3.6.1.2.1.52.1.2.1.6,INTEGRATED-SERVICES-MIB::intSrvFlowDestAddrLength,INTEGER,read-create,,current,,The length of the destination address in bits. This is the CIDR Prefix Length, which for IP4 hosts and multicast addresses is 32 bits. This object may not be changed when the value of the RowStatus object is 'active'.
.1.3.6.1.2.1.52.1.2.1.7,INTEGRATED-SERVICES-MIB::intSrvFlowSenderAddrLength,INTEGER,read-create,,current,,The length of the sender's address in bits. This is the CIDR Prefix Length, which for IP4 hosts and multicast addresses is 32 bits. This object may not be changed when the value of the RowStatus object is 'active'.
.1.3.6.1.2.1.52.1.2.1.8,INTEGRATED-SERVICES-MIB::intSrvFlowProtocol,INTEGER,read-create,,current,,The IP Protocol used by a session. This ob- ject may not be changed when the value of the RowStatus object is 'active'.
.1.3.6.1.2.1.52.1.2.1.9,INTEGRATED-SERVICES-MIB::intSrvFlowDestPort,OCTET,read-create,,current,,The UDP or TCP port number used as a destina- tion port for all senders in this session. If the IP protocol in use, specified by intSrvResvFwdProtocol, is 50 (ESP) or 51 (AH), this represents a virtual destination port number. A value of zero indicates that the IP protocol in use does not have ports. This ob- ject may not be changed when the value of the RowStatus object is 'active'.
.1.3.6.1.2.1.52.1.2.1.10,INTEGRATED-SERVICES-MIB::intSrvFlowPort,OCTET,read-create,,current,,The UDP or TCP port number used as a source port for this sender in this session. If the IP protocol in use, specified by intSrvResvFwdProtocol is 50 (ESP) or 51 (AH), this represents a generalized port identifier (GPI). A value of zero indicates that the IP protocol in use does not have ports. This ob- ject may not be changed when the value of the RowStatus object is 'active'.
.1.3.6.1.2.1.52.1.2.1.11,INTEGRATED-SERVICES-MIB::intSrvFlowFlowId,INTEGER,read-only,,current,,The flow ID that this sender is using, if this is an IPv6 session.
.1.3.6.1.2.1.52.1.2.1.12,INTEGRATED-SERVICES-MIB::intSrvFlowInterface,Integer32,read-create,,current,,The ifIndex value of the interface on which this reservation exists.
.1.3.6.1.2.1.52.1.2.1.13,INTEGRATED-SERVICES-MIB::intSrvFlowIfAddr,OCTET,read-create,,current,,The IP Address on the ifEntry on which this reservation exists. This is present primarily to support those interfaces which layer multi- ple IP Addresses on the interface.
.1.3.6.1.2.1.52.1.2.1.14,INTEGRATED-SERVICES-MIB::intSrvFlowRate,INTEGER,read-create,,current,,The Reserved Rate of the sender's data stream. If this is a Controlled Load service flow, this rate is derived from the Tspec rate parameter (r). If this is a Guaranteed service flow, this rate is derived from the Rspec clearing rate parameter (R).
.1.3.6.1.2.1.52.1.2.1.15,INTEGRATED-SERVICES-MIB::intSrvFlowBurst,INTEGER,read-create,,current,,The size of the largest burst expected from the sender at a time. If this is less than the sender's advertised burst size, the receiver is asking the network to provide flow pacing beyond what would be provided under normal circumstances. Such pac- ing is at the network's option.
.1.3.6.1.2.1.52.1.2.1.16,INTEGRATED-SERVICES-MIB::intSrvFlowWeight,Integer32,read-create,,current,,The weight used to prioritize the traffic. Note that the interpretation of this object is implementation-specific, as implementations vary in their use of weighting procedures.
.1.3.6.1.2.1.52.1.2.1.17,INTEGRATED-SERVICES-MIB::intSrvFlowQueue,Integer32,read-create,,current,,The number of the queue used by this traffic. Note that the interpretation of this object is implementation-specific, as implementations vary in their use of queue identifiers.
.1.3.6.1.2.1.52.1.2.1.18,INTEGRATED-SERVICES-MIB::intSrvFlowMinTU,INTEGER,read-create,,current,,The minimum message size for this flow. The policing algorithm will treat smaller messages as though they are this size.
.1.3.6.1.2.1.52.1.2.1.19,INTEGRATED-SERVICES-MIB::intSrvFlowMaxTU,INTEGER,read-create,,current,,The maximum datagram size for this flow that will conform to the traffic specification. This value cannot exceed the MTU of the interface.
.1.3.6.1.2.1.52.1.2.1.20,INTEGRATED-SERVICES-MIB::intSrvFlowBestEffort,Counter32,read-only,,current,,The number of packets that were remanded to best effort service.
.1.3.6.1.2.1.52.1.2.1.21,INTEGRATED-SERVICES-MIB::intSrvFlowPoliced,Counter32,read-only,,current,,The number of packets policed since the incep- tion of the flow's service.
.1.3.6.1.2.1.52.1.2.1.22,INTEGRATED-SERVICES-MIB::intSrvFlowDiscard,INTEGER,read-create,,current,true(1):false(2),If 'true', the flow is to incur loss when traffic is policed. If 'false', policed traff- ic is treated as best effort traffic.
.1.3.6.1.2.1.52.1.2.1.23,INTEGRATED-SERVICES-MIB::intSrvFlowService,INTEGER,read-only,,current,bestEffort(1):guaranteedDelay(2):controlledLoad(5),The QoS service being applied to this flow.
.1.3.6.1.2.1.52.1.2.1.24,INTEGRATED-SERVICES-MIB::intSrvFlowOrder,INTEGER,read-create,,current,,In the event of ambiguity, the order in which the classifier should make its comparisons. The row with intSrvFlowOrder=0 is tried first, and comparisons proceed in the order of in- creasing value. Non-serial implementations of the classifier should emulate this behavior.
.1.3.6.1.2.1.52.1.2.1.25,INTEGRATED-SERVICES-MIB::intSrvFlowStatus,INTEGER,read-create,,current,active(1):notInService(2):notReady(3):createAndGo(4):createAndWait(5):destroy(6),'active' for all active flows. This object may be used to install static classifier infor- mation, delete classifier information, or au- thorize such.
.1.3.6.1.2.1.52.2,INTEGRATED-SERVICES-MIB::intSrvGenObjects,,,,,,
.1.3.6.1.2.1.52.2.1,INTEGRATED-SERVICES-MIB::intSrvFlowNewIndex,,read-write,,current,,This object is used to assign values to intSrvFlowNumber as described in 'Textual Con- ventions for SNMPv2'. The network manager reads the object, and then writes the value back in the SET that creates a new instance of intSrvFlowEntry. If the SET fails with the code 'inconsistentValue', then the process must be repeated; If the SET succeeds, then the ob- ject is incremented, and the new instance is created according to the manager's directions.
.1.3.6.1.2.1.52.3,INTEGRATED-SERVICES-MIB::intSrvNotifications,,,,,,
.1.3.6.1.2.1.52.4,INTEGRATED-SERVICES-MIB::intSrvConformance,,,,,,
.1.3.6.1.2.1.52.4.1,INTEGRATED-SERVICES-MIB::intSrvGroups,,,,,,
.1.3.6.1.2.1.52.4.1.1,INTEGRATED-SERVICES-MIB::intSrvIfAttribGroup,,,,,,These objects are required for Systems sup- porting the Integrated Services Architecture.
.1.3.6.1.2.1.52.4.1.2,INTEGRATED-SERVICES-MIB::intSrvFlowsGroup,,,,,,These objects are required for Systems sup- porting the Integrated Services Architecture.
.1.3.6.1.2.1.52.4.2,INTEGRATED-SERVICES-MIB::intSrvCompliances,,,,,,
.1.3.6.1.2.1.52.4.2.1,INTEGRATED-SERVICES-MIB::intSrvCompliance,,,,,,The compliance statement 
.1.3.6.1.2.1.68,VRRP-MIB::vrrpMIB,,,,,,This MIB describes objects used for managing Virtual  Router Redundancy Protocol (VRRP) over IPv4 and IPv6  protocols.  This MIB supports VRRP for IPv4 and IPv6 protocols  simultaneously running on a given interface of a  router.   Copyright (C) The IETF Trust (2006).
.1.3.6.1.2.1.68.0,VRRP-MIB::vrrpNotifications,,,,,,
.1.3.6.1.2.1.68.0.1,VRRP-MIB::vrrpTrapNewMaster,,,,,,The newMaster trap indicates that the sending agent  has transitioned to 'Master' state.
.1.3.6.1.2.1.68.0.2,VRRP-MIB::vrrpTrapAuthFailure,,,,,,A vrrpAuthFailure trap signifies that a packet has  been received from a router whose authentication key  or authentication type conflicts with this router's  authentication key or authentication type. Implementation  of this trap is optional.  This object is deprecated in the IP Version MIB. 
.1.3.6.1.2.1.68.0.3,VRRP-MIB::vrrpTrapProtoError,,,,,,The error trap indicates that the sending agent has  encountered the protocol error indicated by  vrrpTrapProtoErrorReason.
.1.3.6.1.2.1.68.1,VRRP-MIB::vrrpOperations,,,,,,
.1.3.6.1.2.1.68.1.1,VRRP-MIB::vrrpNodeVersion,Integer32,read-only,,deprecated,,This value identifies the particular version of the VRRP  supported by this node.  This object is deprecated in the IP Version Independent  MIB.
.1.3.6.1.2.1.68.1.2,VRRP-MIB::vrrpNotificationCntl,INTEGER,read-write,,current,enabled(1):disabled(2),Indicates whether the VRRP-enabled router will generate  SNMP notifications for events defined in this MIB.  'Enabled' results in SNMP notifications; 'disabled', no  notifications are sent.
.1.3.6.1.2.1.68.1.3,VRRP-MIB::vrrpOperTable,,not-accessible,,deprecated,,Operations table for a VRRP router which consists of a  sequence (i.e., one or more conceptual rows) of  'vrrpOperEntry' items.  This table has been deprecated as a new IP version  neutral 'vrrpOperationsTable' has been added. 
.1.3.6.1.2.1.68.1.3.1,VRRP-MIB::vrrpOperEntry,,not-accessible,ifIndex:vrrpOperVrId,deprecated,,An entry in the vrrpOperTable containing the operational  characteristics of a virtual router. On a VRRP router,  a given virtual router is identified by a combination  of the IF index and VRID.  Rows in the table cannot be modified unless the value  of `vrrpOperAdminState' is `disabled' and the  `vrrpOperState' has transitioned to `initialize'.  This object is deprecated in favor of the IP Version  independent object, vrrpOperationsEntry
.1.3.6.1.2.1.68.1.3.1.1,VRRP-MIB::vrrpOperVrId,Integer32,not-accessible,,deprecated,,This object contains the Virtual Router Identifier  (VRID).  This object is deprecated in favor of the IP Version  independent object, vrrpOperationsVrId 
.1.3.6.1.2.1.68.1.3.1.2,VRRP-MIB::vrrpOperVirtualMacAddr,OCTET,read-only,,deprecated,,The virtual MAC address of the virtual router. Although  this object can be derived from the 'vrrpOperVrId' object,  it is defined so that it is easily obtainable by a  management application and can be included in VRRP-related  SNMP traps.  This object is deprecated in favor of the IP Version  Independent object, vrrpOperationsVirtualMacAddr.
.1.3.6.1.2.1.68.1.3.1.3,VRRP-MIB::vrrpOperState,INTEGER,read-only,,deprecated,initialize(1):backup(2):master(3),The current state of the virtual router. This object has  three defined values:  - `initialize', which indicates that all the  virtual router is waiting for a startup event.  - `backup', which indicates the virtual router is  monitoring the availability of the master router.  - `master', which indicates that the virtual router  is forwarding packets for IP addresses that are  associated with this router.  Setting the `vrrpOperAdminState' object (below) initiates  transitions in the value of this object.  This object is deprecated in favor of the IP Version  Independent object, vrrpOperationsState.
.1.3.6.1.2.1.68.1.3.1.4,VRRP-MIB::vrrpOperAdminState,INTEGER,read-create,,deprecated,up(1):down(2),This object will enable/disable the virtual router  function.   Setting the value to `up', will transition the state of  the virtual router from `initialize' to `backup' or  `master', depending on the value of `vrrpOperPriority'.   Setting the value to `down', will transition the router  from `master' or `backup' to `initialize'. State  transitions may not be immediate; they sometimes depend on  other factors, such as the interface (IF) state.   The `vrrpOperAdminState' object must be set to `down' prior  to modifying the other read-create objects in the  conceptual row. The value of the `vrrpOperRowStatus'  object (below) must be `active', signifying that the  conceptual row is valid (i.e., the objects are correctly  set), in order for this object to be set to `up'.   This object is deprecated in favor of the IP Version  Independent object, vrrpOperationsState.
.1.3.6.1.2.1.68.1.3.1.5,VRRP-MIB::vrrpOperPriority,Integer32,read-create,,deprecated,,This object specifies the priority to be used for the  virtual router master election process. Higher values  imply higher priority.  A priority of '0', although not settable, is sent by  the master router to indicate that this router has ceased  to participate in VRRP and a backup virtual router should  transition to become a new master.  A priority of 255 is used for the router that owns the  associated IP address(es).  This object is deprecated in favor of the IP Version  Independent object, vrrpOperationsPriority.
.1.3.6.1.2.1.68.1.3.1.6,VRRP-MIB::vrrpOperIpAddrCount,Integer32,read-only,,deprecated,,The number of IP addresses that are associated with this  virtual router. This number is equal to the number of  rows in the vrrpAssoIpAddrTable that correspond to a  given IF index/VRID pair.  This object is deprecated in favor of the IP Version  Independent object, vrrpOperationsAddrCount.
.1.3.6.1.2.1.68.1.3.1.7,VRRP-MIB::vrrpOperMasterIpAddr,IpAddress,read-only,,deprecated,,The master router's real (primary) IP address. This is  the IP address listed as the source in VRRP advertisement  last received by this virtual router.  This object is deprecated in favor of the IP Version  Independent object, vrrpOperationsMasterIpAddr.
.1.3.6.1.2.1.68.1.3.1.8,VRRP-MIB::vrrpOperPrimaryIpAddr,IpAddress,read-create,,deprecated,,In the case where there is more than one IP address for  a given `ifIndex', this object is used to specify the IP  address that will become the `vrrpOperMasterIpAddr',  should the virtual router transition from backup to  master. If this object is set to 0.0.0.0, the IP address  which is numerically lowest (of all the associated IP  address for the interface) will be selected.  This object is deprecated in favor of the IP Version  Independent object, vrrpOperationsPrimaryIpAddr.
.1.3.6.1.2.1.68.1.3.1.9,VRRP-MIB::vrrpOperAuthType,INTEGER,read-create,,deprecated,noAuthentication(1):simpleTextPassword(2):ipAuthenticationHeader(3),Authentication type used for VRRP protocol exchanges  between virtual routers. This value of this object is the  same for a given ifIndex.  New enumerations to this list can only be added via a new  RFC on the standards track.  This object is deprecated in the IP Version MIB.
.1.3.6.1.2.1.68.1.3.1.10,VRRP-MIB::vrrpOperAuthKey,OCTET,read-create,,deprecated,,The Authentication Key. This object is set according to  the value of the 'vrrpOperAuthType' object  ('simpleTextPassword' or 'ipAuthenticationHeader'). If  the length of the value is less than 16 octets, the agent  will left adjust and zero fill to 16 octets. The value of  this object is the same for a given ifIndex.  When read, vrrpOperAuthKey always returns an Octet String  of length zero.  This object is deprecated in the IP Version MIB.
.1.3.6.1.2.1.68.1.3.1.11,VRRP-MIB::vrrpOperAdvertisementInterval,Integer32,read-create,,deprecated,,The time interval, in seconds, between sending  advertisement messages. Only the master router sends  VRRP advertisements.  This object is deprecated in favor of the IP Version  Independent object, vrrpOperationsAdvInterval. 
.1.3.6.1.2.1.68.1.3.1.12,VRRP-MIB::vrrpOperPreemptMode,INTEGER,read-create,,deprecated,true(1):false(2),Controls whether a higher priority virtual router will  preempt a lower priority master.  This object is deprecated in favor of the IP Version  Independent object, vrrpOperationsPreemptMode. 
.1.3.6.1.2.1.68.1.3.1.13,VRRP-MIB::vrrpOperVirtualRouterUpTime,TimeTicks,read-only,,deprecated,,This is the value of the `sysUpTime' object when this  virtual router (i.e., the `vrrpOperState') transitioned  out of `initialized'.  This object is deprecated in favor of the IP Version  Independent object, vrrpOperationsUpTime.
.1.3.6.1.2.1.68.1.3.1.14,VRRP-MIB::vrrpOperProtocol,INTEGER,read-create,,deprecated,ip(1):bridge(2):decnet(3):other(4),The particular protocol being controlled by this Virtual  Router.  New enumerations to this list can only be added via a new  RFC on the standards track.  This object is deprecated in the IP Version Independent  MIB.
.1.3.6.1.2.1.68.1.3.1.15,VRRP-MIB::vrrpOperRowStatus,INTEGER,read-create,,deprecated,active(1):notInService(2):notReady(3):createAndGo(4):createAndWait(5):destroy(6),The RowStatus variable, used in accordance to  installation and removal conventions for conceptual rows.  The RowStatus of a currently active row in the  vrrpOperTable is constrained by the operational state of  the corresponding virtual router.  When `vrrpOperRowStatus' is set to active(1), no other  objects in the conceptual row, with the exception of  `vrrpOperAdminState', can be modified. Prior to setting  the `vrrpOperRowStatus' object from `active' to a  different value, the `vrrpOperAdminState' object must be  set to `down' and the `vrrpOperState' object be  transitioned to `initialize'.  To create a row in this table, a manager sets this object  to either createAndGo(4) or createAndWait(5). Until  instances of all corresponding columns are appropriately  configured, the value of the corresponding instance of the  `vrrpOperRowStatus' column will be read as notReady(3).  In particular, a newly created row cannot be made  active(1) until (minimally) the corresponding instance of  `vrrpOperVrId' has been set and there is at least one  active row in the `vrrpAssoIpAddrTable' defining an  associated IP address for the virtual router.  This object is deprecated in favor of the IP Version  Independent object, vrrpOperationsRowStatus. 
.1.3.6.1.2.1.68.1.4,VRRP-MIB::vrrpAssoIpAddrTable,,not-accessible,,deprecated,,The table of addresses associated with this virtual  router.  This object is deprecated in favor of the IP Version  Independent object, vrrpAssociatedIpAddrTable. 
.1.3.6.1.2.1.68.1.4.1,VRRP-MIB::vrrpAssoIpAddrEntry,,not-accessible,ifIndex:vrrpOperVrId:vrrpAssoIpAddr,deprecated,,An entry in the table contains an IP address that is  associated with a virtual router. The number of rows for  a given ifIndex and VrId will equal the number of IP  addresses associated (e.g., backed up) by the virtual  router (equivalent to 'vrrpOperIpAddrCount').  Rows in the table cannot be modified unless the value  of `vrrpOperAdminState' is `disabled' and the  `vrrpOperState' has transitioned to `initialize'.  This object is deprecated in favor of the IP Version  Independent object, vrrpAssociatedIpAddrEntry.
.1.3.6.1.2.1.68.1.4.1.1,VRRP-MIB::vrrpAssoIpAddr,IpAddress,not-accessible,,deprecated,,The assigned IP addresses that a virtual router is  responsible for backing up.  This object is deprecated in favor of the IP Version  Independent object, vrrpAssociatedIpAddr.
.1.3.6.1.2.1.68.1.4.1.2,VRRP-MIB::vrrpAssoIpAddrRowStatus,INTEGER,read-create,,deprecated,active(1):notInService(2):notReady(3):createAndGo(4):createAndWait(5):destroy(6),The row status variable, used according to installation  and removal conventions for conceptual rows. Setting this  object to active(1) or createAndGo(4) results in the  addition of an associated address for a virtual router.  Destroying the entry or setting it to notInService(2)  removes the associated address from the virtual router.  The use of other values is implementation-dependent.  This object is deprecated in favor of the IP Version  Independent object, vrrpAssociatedIpAddrRowStatus.
.1.3.6.1.2.1.68.1.5,VRRP-MIB::vrrpTrapPacketSrc,IpAddress,accessible-for-notify,,deprecated,,The IP address of an inbound VRRP packet. Used by  vrrpTrapAuthFailure trap.  This object is deprecated in the IP Version MIB. 
.1.3.6.1.2.1.68.1.6,VRRP-MIB::vrrpTrapAuthErrorType,INTEGER,accessible-for-notify,,deprecated,invalidAuthType(1):authTypeMismatch(2):authFailure(3),Potential types of configuration conflicts.  Used by vrrpAuthFailure trap.  This object is deprecated in the IP Version MIB. 
.1.3.6.1.2.1.68.1.7,VRRP-MIB::vrrpOperationsTable,,not-accessible,,current,,Unified Operations table for a VRRP router which  consists of a sequence (i.e., one or more conceptual  rows) of 'vrrpOperationsEntry' items which describe  the operational characteristics of a virtual router.
.1.3.6.1.2.1.68.1.7.1,VRRP-MIB::vrrpOperationsEntry,,not-accessible,vrrpOperationsInetAddrType:vrrpOperationsVrId:ifIndex,current,,An entry in the vrrpOperationsTable containing the  operational characteristics of a virtual router. On a  VRRP router, a given virtual router is identified by a  combination of the IP version, VRID and ifIndex.  ifIndex represents a physical interface of the router.   Note that rows in this table can be distinguished on a  multi-stacked device running VRRP over IPv4 and  IPv6 on the same physical interface.   Rows in the table cannot be modified unless the value  of 'vrrpOperationsState' has transitioned to  'initialize'
.1.3.6.1.2.1.68.1.7.1.1,VRRP-MIB::vrrpOperationsInetAddrType,INTEGER,not-accessible,,current,unknown(0):ipv4(1):ipv6(2):ipv4z(3):ipv6z(4):dns(16),The IP address type of VrrpOperationsEntry. This value  applies to both vrrpOperationsMasterIpAddr and  vrrpOperationsPrimaryIpAddr.
.1.3.6.1.2.1.68.1.7.1.2,VRRP-MIB::vrrpOperationsVrId,Integer32,not-accessible,,current,,This object contains the Virtual Router Identifier  (VRID).
.1.3.6.1.2.1.68.1.7.1.3,VRRP-MIB::vrrpOperationsVirtualMacAddr,OCTET,read-only,,current,,The virtual MAC address of the virtual router.  Although this object can be derived from the  'vrrpOperationsVrId' object, it is defined so that it  is easily obtainable by a management application and  can be included in VRRP-related SNMP notifications.
.1.3.6.1.2.1.68.1.7.1.4,VRRP-MIB::vrrpOperationsState,INTEGER,read-only,,current,initialize(1):backup(2):master(3),The current state of the virtual router. This object  has three defined values:   - `initialize', which indicates that the  virtual router is waiting for a startup event.   - `backup', which indicates the virtual router is  monitoring the availability of the master router.   - `master', which indicates that the virtual router  is forwarding packets for IP addresses that are  associated with this router.
.1.3.6.1.2.1.68.1.7.1.5,VRRP-MIB::vrrpOperationsPriority,Unsigned32,read-create,,current,,This object specifies the priority to be used for the  virtual router master election process. Higher values  imply higher priority.   A priority of '0', although not settable, is sent by  the master router to indicate that this router has  ceased to participate in VRRP and a backup virtual  router should transition to become a new master.   A priority of 255 is used for the router that owns the  associated IP address(es) for VRRP over IPv4 and hence  not settable.  A 'badValue(3)' should be returned when a user tries to  set 0 or 255 for this object. 
.1.3.6.1.2.1.68.1.7.1.6,VRRP-MIB::vrrpOperationsAddrCount,Integer32,read-only,,current,,The number of IP addresses that are associated with  this virtual router. This number is equal to the  number of rows in the vrrpAssociatedAddrTable that  correspond to a given IP version/VRID/ifIndex.
.1.3.6.1.2.1.68.1.7.1.7,VRRP-MIB::vrrpOperationsMasterIpAddr,OCTET,read-only,,current,,The master router's real IP address. Master router  would set this address to vrrpOperationsPrimaryIpAddr  while transitioning to master state. For backup  routers, this is the IP address listed as the source in  VRRP advertisement last received by this virtual  router.
.1.3.6.1.2.1.68.1.7.1.8,VRRP-MIB::vrrpOperationsPrimaryIpAddr,OCTET,read-create,,current,,In the case where there are more than one IP  Address (associated IP addresses) for a given  `ifIndex', this object is used to specify the IP  address that will become the  vrrpOperationsMasterIpAddr', should the virtual router  transition from backup state to master.
.1.3.6.1.2.1.68.1.7.1.9,VRRP-MIB::vrrpOperationsAdvInterval,INTEGER,read-create,,current,,The time interval, in centiseconds, between sending  advertisement messages. Only the master router sends  VRRP advertisements.
.1.3.6.1.2.1.68.1.7.1.10,VRRP-MIB::vrrpOperationsPreemptMode,INTEGER,read-create,,current,true(1):false(2),Controls whether a higher priority virtual router will  preempt a lower priority master.
.1.3.6.1.2.1.68.1.7.1.11,VRRP-MIB::vrrpOperationsAcceptMode,INTEGER,read-create,,current,true(1):false(2),Controls whether a virtual router in Master state  will accept packets addressed to the address owner's  IPv6 address as its own if it is not the IPv6 address  owner. Default is False.  This object is not relevant for rows representing VRRP  over IPv4 and should be set to false.
.1.3.6.1.2.1.68.1.7.1.12,VRRP-MIB::vrrpOperationsUpTime,TimeTicks,read-only,,current,,This is the value of the `sysUpTime' object when this  virtual router (i.e., the `vrrpOperationsState')  transitioned out of `initialized'.
.1.3.6.1.2.1.68.1.7.1.13,VRRP-MIB::vrrpOperationsStorageType,INTEGER,read-create,,current,other(1):volatile(2):nonVolatile(3):permanent(4):readOnly(5),The storage type for this conceptual row. Write access  is not required. It is optional to support nonVolatile  StorageType enumeration.
.1.3.6.1.2.1.68.1.7.1.14,VRRP-MIB::vrrpOperationsRowStatus,INTEGER,read-create,,current,active(1):notInService(2):notReady(3):createAndGo(4):createAndWait(5):destroy(6),The RowStatus variable should be used in accordance to  installation and removal conventions for conceptual  rows. When `vrrpOperationsRowStatus' is set to  active(1), no other objects in the conceptual row can  be modified.   To create a row in this table, a manager sets this  object to either createAndGo(4) or createAndWait(5).  Until instances of all corresponding columns are  appropriately configured, the value of the  corresponding instance of the `vrrpOperationsRowStatus'  column will be read as notReady(3).  In particular, a newly created row cannot be made  active(1) until (minimally) the corresponding instance  of vrrpOperationsInetAddrType, vrrpOperationsVrId and  vrrpOperationsPrimaryIpAddr has been set and there is  at least one active row in the  `vrrpAssociatedIpAddrTable' defining an associated  IP address.  notInService(2) should be used to administratively  bring the row down.  A typical order of operation to add a row is:  1. Create a row in vrrpOperationsTable with  createAndWait(5).  2. Create one or more corresponding rows in  vrrpAssociatedIpAddrTable.  3. Populate the vrrpOperationsEntry.  4. set vrrpOperationsRowStatus to active(1).  A typical order of operation to delete an entry is:  1. Set vrrpOperationsRowStatus to notInService(2).  2. Set the corresponding rows in  vrrpAssociatedIpAddrTable to destroy(6) to delete the  entry.  3. set vrrpOperationsRowStatus to destroy(6) to delete  the entry.
.1.3.6.1.2.1.68.1.8,VRRP-MIB::vrrpAssociatedIpAddrTable,,not-accessible,,current,,The table of addresses associated with this virtual  router.
.1.3.6.1.2.1.68.1.8.1,VRRP-MIB::vrrpAssociatedIpAddrEntry,,not-accessible,vrrpOperationsInetAddrType:vrrpOperationsVrId:ifIndex:vrrpAssociatedIpAddr,current,,An entry in the table contains an IP address that is  associated with a virtual router. The number of rows  for a given IP version, VrID and ifIndex will equal the  number of IP addresses associated (e.g., backed up) by  the virtual router (equivalent to  'vrrpOperationsIpAddrCount').   Rows in the table cannot be modified unless the value  of `vrrpOperationsState' has transitioned to  `initialize'.
.1.3.6.1.2.1.68.1.8.1.1,VRRP-MIB::vrrpAssociatedIpAddr,OCTET,not-accessible,,current,,The assigned IP addresses that a virtual router is  responsible for backing up.  The size of this object is either 4 or 16 depending on  vrrpOperationsInetAddrType.
.1.3.6.1.2.1.68.1.8.1.2,VRRP-MIB::vrrpAssociatedStorageType,INTEGER,read-create,,current,other(1):volatile(2):nonVolatile(3):permanent(4):readOnly(5),The storage type for this conceptual row. Write access  is not required. It is optional to support nonVolatile  StorageType enumeration.
.1.3.6.1.2.1.68.1.8.1.3,VRRP-MIB::vrrpAssociatedIpAddrRowStatus,INTEGER,read-create,,current,active(1):notInService(2):notReady(3):createAndGo(4):createAndWait(5):destroy(6),The RowStatus variable, used according to  installation and removal conventions for conceptual  rows. To create a row in this table, a manager sets  this object to either createAndGo(4) or  createAndWait(5). Setting this object to active(1)  results in the addition of an associated address for a  virtual router. Setting this object to notInService(2)  results in administratively bringing down the row.  Destroying the entry or setting it to destroy(6)  removes the associated address from the virtual router.  The use of other values is implementation-dependent.  Only vrrpAssociatedStorageType can be modified when the  row is in active(1) state for Implementations  supporting write access to vrrpAssociatedStorageType  Implementations should not allow deletion of the last  row corresponding to an active row in  vrrpOperationsTable.  Refer to description of vrrpOperationsRowStatus for a  typical row creation and deletion scenarios.
.1.3.6.1.2.1.68.1.9,VRRP-MIB::vrrpNewMasterReason,INTEGER,read-only,,current,notmaster(0):priority(1):preempted(2):masterNoResponse(3),This indicates the reason for vrrpNewMaster trap.  Used by vrrpTrapNewMaster trap. The object can be  polled if the vrrpNewMaster trap is lost to identify  the reason for transmission. Backup router should  return notmaster(0) when pooled. 
.1.3.6.1.2.1.68.1.10,VRRP-MIB::vrrpTrapProtoErrReason,INTEGER,accessible-for-notify,,current,hopLimitError(0):versionError(1):checksumError(2):vridError(3),This indicates the reason for protocol error trap.  Used by vrrpTrapProtoError trap.
.1.3.6.1.2.1.68.2,VRRP-MIB::vrrpStatistics,,,,,,
.1.3.6.1.2.1.68.2.1,VRRP-MIB::vrrpRouterChecksumErrors,Counter32,read-only,,current,,The total number of VRRP packets received with an  invalid VRRP checksum value.
.1.3.6.1.2.1.68.2.2,VRRP-MIB::vrrpRouterVersionErrors,Counter32,read-only,,current,,The total number of VRRP packets received with an  unknown or unsupported version number.
.1.3.6.1.2.1.68.2.3,VRRP-MIB::vrrpRouterVrIdErrors,Counter32,read-only,,current,,The total number of VRRP packets received with an  invalid VRID for this virtual router.
.1.3.6.1.2.1.68.2.4,VRRP-MIB::vrrpRouterStatsTable,,not-accessible,,deprecated,,Table of virtual router statistics.  This object is deprecated in favor of the IP Version  Independent object, vrrpRouterStatisticsTable.
.1.3.6.1.2.1.68.2.4.1,VRRP-MIB::vrrpRouterStatsEntry,,not-accessible,,deprecated,,An entry in the table, containing statistics information  about a given virtual router.  This object is deprecated in favor of the IP Version  Independent object, vrrpRouterStatisticsEntry.
.1.3.6.1.2.1.68.2.4.1.1,VRRP-MIB::vrrpStatsBecomeMaster,Counter32,read-only,,deprecated,,The total number of times that this virtual router's  state has transitioned to MASTER.  This object is deprecated in favor of the IP Version  Independent object, vrrpStatisticsMasterTransitions.
.1.3.6.1.2.1.68.2.4.1.2,VRRP-MIB::vrrpStatsAdvertiseRcvd,Counter32,read-only,,deprecated,,The total number of VRRP advertisements received by this  virtual router.  This object is deprecated in favor of the IP Version  Independent object, vrrpStatisticsRcvdAdvertisements.
.1.3.6.1.2.1.68.2.4.1.3,VRRP-MIB::vrrpStatsAdvertiseIntervalErrors,Counter32,read-only,,deprecated,,The total number of VRRP advertisement packets received  for which the advertisement interval is different than the  one configured for the local virtual router.  This object is deprecated in favor of the IP Version  Independent object, vrrpStatisticsAdvIntervalErrors.
.1.3.6.1.2.1.68.2.4.1.4,VRRP-MIB::vrrpStatsAuthFailures,Counter32,read-only,,deprecated,,The total number of VRRP packets received that do not  pass the authentication check.  This object is deprecated in the IP Version MIB.
.1.3.6.1.2.1.68.2.4.1.5,VRRP-MIB::vrrpStatsIpTtlErrors,Counter32,read-only,,deprecated,,The total number of VRRP packets received by the virtual  router with IP TTL (Time-To-Live) not equal to 255.  This object is deprecated in favor of the IP Version  Independent object, vrrpStatisticsIpTtlErrors.
.1.3.6.1.2.1.68.2.4.1.6,VRRP-MIB::vrrpStatsPriorityZeroPktsRcvd,Counter32,read-only,,deprecated,,The total number of VRRP packets received by the virtual  router with a priority of '0'.  This object is deprecated in favor of the IP Version  Independent object, vrrpStatisticsRcvdPriZeroPackets.
.1.3.6.1.2.1.68.2.4.1.7,VRRP-MIB::vrrpStatsPriorityZeroPktsSent,Counter32,read-only,,deprecated,,The total number of VRRP packets sent by the virtual  router with a priority of '0'.  This object is deprecated in favor of the IP Version  Independent object, vrrpStatisticsSentPriZeroPackets. 
.1.3.6.1.2.1.68.2.4.1.8,VRRP-MIB::vrrpStatsInvalidTypePktsRcvd,Counter32,read-only,,deprecated,,The number of VRRP packets received by the virtual router  with an invalid value in the 'type' field.  This object is deprecated in favor of the IP Version  Independent object, vrrpStatisticsRcvdInvalidTypePkts. 
.1.3.6.1.2.1.68.2.4.1.9,VRRP-MIB::vrrpStatsAddressListErrors,Counter32,read-only,,deprecated,,The total number of packets received for which the  address list does not match the locally configured list  for the virtual router.  This object is deprecated in favor of the IP Version  Independent object, vrrpStatisticsAddressListErrors.
.1.3.6.1.2.1.68.2.4.1.10,VRRP-MIB::vrrpStatsInvalidAuthType,Counter32,read-only,,deprecated,,The total number of packets received with an unknown  authentication type.  This object is deprecated in favor of the IP Version  Independent object, vrrpStatisticsPacketLengthErrors.
.1.3.6.1.2.1.68.2.4.1.11,VRRP-MIB::vrrpStatsAuthTypeMismatch,Counter32,read-only,,deprecated,,The total number of packets received with 'Auth Type' not  equal to the locally configured authentication method  (`vrrpOperAuthType').  This object is deprecated in favor of the IP Version  Independent object,  vrrpStatisticsRcvdInvalidAuthentications.
.1.3.6.1.2.1.68.2.4.1.12,VRRP-MIB::vrrpStatsPacketLengthErrors,Counter32,read-only,,deprecated,,The total number of packets received with a packet length  less than the length of the VRRP header.  This object is deprecated in favor of the IP Version  Independent object, vrrpStatisticsPacketLengthErrors. 
.1.3.6.1.2.1.68.2.5,VRRP-MIB::vrrpRouterStatisticsTable,,not-accessible,,current,,Table of virtual router statistics.
.1.3.6.1.2.1.68.2.5.1,VRRP-MIB::vrrpRouterStatisticsEntry,,not-accessible,,current,,An entry in the table, containing statistics  information about a given virtual router.
.1.3.6.1.2.1.68.2.5.1.1,VRRP-MIB::vrrpStatisticsMasterTransitions,Counter32,read-only,,current,,The total number of times that this virtual router's  state has transitioned to MASTER.   Discontinuities in the value of this counter can occur  at re-initialization of the management system, and at  other times as indicated by the value of  vrrpStatisticsDiscontinuityTime.
.1.3.6.1.2.1.68.2.5.1.2,VRRP-MIB::vrrpStatisticsRcvdAdvertisements,Counter32,read-only,,current,,The total number of VRRP advertisements received by  this virtual router.   Discontinuities in the value of this counter can occur  at re-initialization of the management system, and at  other times as indicated by the value of  vrrpStatisticsDiscontinuityTime.
.1.3.6.1.2.1.68.2.5.1.3,VRRP-MIB::vrrpStatisticsAdvIntervalErrors,Counter32,read-only,,current,,The total number of VRRP advertisement packets  received for which the advertisement interval is  different than the one configured for the local virtual  router.   Discontinuities in the value of this counter can occur  at re-initialization of the management system, and at  other times as indicated by the value of  vrrpStatisticsDiscontinuityTime.
.1.3.6.1.2.1.68.2.5.1.4,VRRP-MIB::vrrpStatisticsIpTtlErrors,Counter32,read-only,,current,,The total number of VRRP packets received by the  Virtual router with IPv4 TTL (for VRRP over IPv4) or  IPv6 Hop Limit (for VRRP over IPv6) not equal to 255.   Discontinuities in the value of this counter can occur  at re-initialization of the management system, and at  other times as indicated by the value of  vrrpStatisticsDiscontinuityTime.
.1.3.6.1.2.1.68.2.5.1.5,VRRP-MIB::vrrpStatisticsRcvdPriZeroPackets,Counter32,read-only,,current,,The total number of VRRP packets received by the  virtual router with a priority of '0'.   Discontinuities in the value of this counter can occur  at re-initialization of the management system, and at  other times as indicated by the value of  vrrpStatisticsDiscontinuityTime.
.1.3.6.1.2.1.68.2.5.1.6,VRRP-MIB::vrrpStatisticsSentPriZeroPackets,Counter32,read-only,,current,,The total number of VRRP packets sent by the virtual  router with a priority of '0'.   Discontinuities in the value of this counter can occur  at re-initialization of the management system, and at  other times as indicated by the value of  vrrpStatisticsDiscontinuityTime.
.1.3.6.1.2.1.68.2.5.1.7,VRRP-MIB::vrrpStatisticsRcvdInvalidTypePkts,Counter32,read-only,,current,,The number of VRRP packets received by the virtual  router with an invalid value in the 'type' field.   Discontinuities in the value of this counter can occur  at re-initialization of the management system, and at  other times as indicated by the value of  vrrpStatisticsDiscontinuityTime.
.1.3.6.1.2.1.68.2.5.1.8,VRRP-MIB::vrrpStatisticsAddressListErrors,Counter32,read-only,,current,,The total number of packets received for which the  address list does not match the locally configured list  for the virtual router.   Discontinuities in the value of this counter can occur  at re-initialization of the management system, and at  other times as indicated by the value of  vrrpStatisticsDiscontinuityTime.
.1.3.6.1.2.1.68.2.5.1.9,VRRP-MIB::vrrpStatisticsPacketLengthErrors,Counter32,read-only,,current,,The total number of packets received with a packet  length less than the length of the VRRP header.   Discontinuities in the value of this counter can occur  at re-initialization of the management system, and at  other times as indicated by the value of  vrrpStatisticsDiscontinuityTime.
.1.3.6.1.2.1.68.2.5.1.10,VRRP-MIB::vrrpStatisticsRcvdInvalidAuthentications,Counter32,read-only,,current,,The total number of packets received with an unknown  authentication type.
.1.3.6.1.2.1.68.2.5.1.11,VRRP-MIB::vrrpStatisticsDiscontinuityTime,TimeTicks,read-only,,current,,The value of sysUpTime on the most recent occasion at  which any one or more of this entry's counters suffered  a discontinuity.   If no such discontinuities have occurred since the last  re-initialization of the local management subsystem,  then this object contains a zero value.
.1.3.6.1.2.1.68.2.5.1.12,VRRP-MIB::vrrpStatisticsRefreshRate,Unsigned32,read-only,,current,,The minimum reasonable polling interval for this entry.  This object provides an indication of the minimum  Amount of time required to update the counters in this  entry.
.1.3.6.1.2.1.68.3,VRRP-MIB::vrrpConformance,,,,,,
.1.3.6.1.2.1.68.3.1,VRRP-MIB::vrrpMIBCompliances,,,,,,
.1.3.6.1.2.1.68.3.1.1,VRRP-MIB::vrrpMIBCompliance,,,,,,This compliance is deprecated in favour of  vrrpModuleFullCompliance.
.1.3.6.1.2.1.68.3.1.2,VRRP-MIB::vrrpModuleFullCompliance,,,,,,The compliance statement for both VRRP for IPv4 and  VRRP for IPv6 implementations.
.1.3.6.1.2.1.68.3.1.3,VRRP-MIB::vrrpModuleReadOnlyCompliance,,,,,,When this MIB is implemented without support for read-  create (i.e. in read-only mode), then such an  implementation can claim read-only compliance. Such a  device can then be monitored but can not be configured  with this MIB.
.1.3.6.1.2.1.68.3.2,VRRP-MIB::vrrpMIBGroups,,,,,,
.1.3.6.1.2.1.68.3.2.1,VRRP-MIB::vrrpOperGroup,,,,,,Conformance group for VRRP operations.
.1.3.6.1.2.1.68.3.2.2,VRRP-MIB::vrrpStatsGroup,,,,,,Conformance group for VRRP statistics.
.1.3.6.1.2.1.68.3.2.3,VRRP-MIB::vrrpTrapGroup,,,,,,Conformance group for objects contained in VRRP  notifications.
.1.3.6.1.2.1.68.3.2.4,VRRP-MIB::vrrpNotificationGroup,,,,,,The VRRP MIB Notification Group.
.1.3.6.1.2.1.68.3.2.5,VRRP-MIB::vrrpOperationsGroup,,,,,,Conformance group for VRRP over IPv4 and IPv6  operations.
.1.3.6.1.2.1.68.3.2.6,VRRP-MIB::vrrpStatisticsGroup,,,,,,Conformance group for VRRP over IPv4 and IPv6  statistics.
.1.3.6.1.2.1.68.3.2.7,VRRP-MIB::vrrpTrapInfoGroup,,,,,,Conformance group for objects contained in VRRP  notifications.
.1.3.6.1.2.1.68.3.2.8,VRRP-MIB::vrrpNotificationsGroup,,,,,,The VRRP MIB Notification Group.
.1.3.6.1.2.1.76,INET-ADDRESS-MIB::inetAddressMIB,,,,,,This MIB module defines textual conventions for representing Internet addresses. An Internet address can be an IPv4 address, an IPv6 address, or a DNS domain name. This module also defines textual conventions for Internet port numbers, autonomous system numbers, and the length of an Internet address prefix. Copyright (C) The Internet Society (2005). This version of this MIB module is part of RFC 4001, see the RFC itself for full legal notices.
.1.3.6.1.2.1.96,DIFFSERV-DSCP-TC::diffServDSCPTC,,,,,,The Textual Conventions defined in this module should be used whenever a Differentiated Services Code Point is used in a MIB.
.1.3.6.1.2.1.97,DIFFSERV-MIB::diffServMib,,,,,,This MIB defines the objects necessary to manage a device that uses the Differentiated Services Architecture described in RFC 2475. The Conceptual Model of a Differentiated Services Router provides supporting information on how such a router is modeled.
.1.3.6.1.2.1.97.1,DIFFSERV-MIB::diffServMIBObjects,,,,,,
.1.3.6.1.2.1.97.1.1,DIFFSERV-MIB::diffServDataPath,,,,,,
.1.3.6.1.2.1.97.1.1.1,DIFFSERV-MIB::diffServDataPathTable,,not-accessible,,current,,The data path table contains RowPointers indicating the start of the functional data path for each interface and traffic direction in this device. These may merge, or be separated into parallel data paths.
.1.3.6.1.2.1.97.1.1.1.1,DIFFSERV-MIB::diffServDataPathEntry,,not-accessible,ifIndex:diffServDataPathIfDirection,current,,An entry in the data path table indicates the start of a single Differentiated Services Functional Data Path in this device. These are associated with individual interfaces, logical or physical, and therefore are instantiated by ifIndex. Therefore, the interface index must have been assigned, according to the procedures applicable to that, before it can be meaningfully used. Generally, this means that the interface must exist. When diffServDataPathStorage is of type nonVolatile, however, this may reflect the configuration for an interface whose ifIndex has been assigned but for which the supporting implementation is not currently present.
.1.3.6.1.2.1.97.1.1.1.1.1,DIFFSERV-MIB::diffServDataPathIfDirection,INTEGER,not-accessible,,current,inbound(1):outbound(2),IfDirection specifies whether the reception or transmission path for this interface is in view.
.1.3.6.1.2.1.97.1.1.1.1.2,DIFFSERV-MIB::diffServDataPathStart,OBJECT,read-create,,current,,This selects the first Differentiated Services Functional Data Path Element to handle traffic for this data path. This RowPointer should point to an instance of one of: diffServClfrEntry diffServMeterEntry diffServActionEntry diffServAlgDropEntry diffServQEntry A value of zeroDotZero in this attribute indicates that no Differentiated Services treatment is performed on traffic of this data path. A pointer with the value zeroDotZero normally terminates a functional data path. Setting this to point to a target that does not exist results in an inconsistentValue error. If the row pointed to is removed or becomes inactive by other means, the treatment is as if this attribute contains a value of zeroDotZero.
.1.3.6.1.2.1.97.1.1.1.1.3,DIFFSERV-MIB::diffServDataPathStorage,INTEGER,read-create,,current,other(1):volatile(2):nonVolatile(3):permanent(4):readOnly(5),The storage type for this conceptual row. Conceptual rows having the value 'permanent' need not allow write-access to any columnar objects in the row.
.1.3.6.1.2.1.97.1.1.1.1.4,DIFFSERV-MIB::diffServDataPathStatus,INTEGER,read-create,,current,active(1):notInService(2):notReady(3):createAndGo(4):createAndWait(5):destroy(6),The status of this conceptual row. All writable objects in this row may be modified at any time.
.1.3.6.1.2.1.97.1.2,DIFFSERV-MIB::diffServClassifier,,,,,,
.1.3.6.1.2.1.97.1.2.1,DIFFSERV-MIB::diffServClfrNextFree,Unsigned32,read-only,,current,,This object contains an unused value for diffServClfrId, or a zero to indicate that none exist.
.1.3.6.1.2.1.97.1.2.2,DIFFSERV-MIB::diffServClfrTable,,not-accessible,,current,,This table enumerates all the diffserv classifier functional data path elements of this device. The actual classification definitions are defined in diffServClfrElementTable entries belonging to each classifier. An entry in this table, pointed to by a RowPointer specifying an instance of diffServClfrStatus, is frequently used as the name for a set of classifier elements, which all use the index diffServClfrId. Per the semantics of the classifier element table, these entries constitute one or more unordered sets of tests which may be simultaneously applied to a message to classify it. The primary function of this table is to ensure that the value of diffServClfrId is unique before attempting to use it in creating a diffServClfrElementEntry. Therefore, the diffServClfrEntry must be created on the same SET as the diffServClfrElementEntry, or before the diffServClfrElementEntry is created.
.1.3.6.1.2.1.97.1.2.2.1,DIFFSERV-MIB::diffServClfrEntry,,not-accessible,diffServClfrId,current,,An entry in the classifier table describes a single classifier. All classifier elements belonging to the same classifier use the classifier's diffServClfrId as part of their index.
.1.3.6.1.2.1.97.1.2.2.1.1,DIFFSERV-MIB::diffServClfrId,Unsigned32,not-accessible,,current,,An index that enumerates the classifier entries. Managers should obtain new values for row creation in this table by reading diffServClfrNextFree.
.1.3.6.1.2.1.97.1.2.2.1.2,DIFFSERV-MIB::diffServClfrStorage,INTEGER,read-create,,current,other(1):volatile(2):nonVolatile(3):permanent(4):readOnly(5),The storage type for this conceptual row. Conceptual rows having the value 'permanent' need not allow write-access to any columnar objects in the row.
.1.3.6.1.2.1.97.1.2.2.1.3,DIFFSERV-MIB::diffServClfrStatus,INTEGER,read-create,,current,active(1):notInService(2):notReady(3):createAndGo(4):createAndWait(5):destroy(6),The status of this conceptual row. All writable objects in this row may be modified at any time. Setting this variable to 'destroy' when the MIB contains one or more RowPointers pointing to it results in destruction being delayed until the row is no longer used.
.1.3.6.1.2.1.97.1.2.3,DIFFSERV-MIB::diffServClfrElementNextFree,Unsigned32,read-only,,current,,This object contains an unused value for diffServClfrElementId, or a zero to indicate that none exist.
.1.3.6.1.2.1.97.1.2.4,DIFFSERV-MIB::diffServClfrElementTable,,not-accessible,,current,,The classifier element table enumerates the relationship between classification patterns and subsequent downstream Differentiated Services Functional Data Path elements. diffServClfrElementSpecific points to a filter that specifies the classification parameters. A classifier may use filter tables of different types together. One example of a filter table defined in this MIB is diffServMultiFieldClfrTable, for IP Multi-Field Classifiers (MFCs). Such an entry might identify anything from a single micro-flow (an identifiable sub-session packet stream directed from one sending transport to the receiving transport or transports), or aggregates of those such as the traffic from a host, traffic for an application, or traffic between two hosts using an application and a given DSCP. The standard Behavior Aggregate used in the Differentiated Services Architecture is encoded as a degenerate case of such an aggregate - the traffic using a particular DSCP value. Filter tables for other filter types may be defined elsewhere.
.1.3.6.1.2.1.97.1.2.4.1,DIFFSERV-MIB::diffServClfrElementEntry,,not-accessible,diffServClfrId:diffServClfrElementId,current,,An entry in the classifier element table describes a single element of the classifier.
.1.3.6.1.2.1.97.1.2.4.1.1,DIFFSERV-MIB::diffServClfrElementId,Unsigned32,not-accessible,,current,,An index that enumerates the Classifier Element entries. Managers obtain new values for row creation in this table by reading diffServClfrElementNextFree.
.1.3.6.1.2.1.97.1.2.4.1.2,DIFFSERV-MIB::diffServClfrElementPrecedence,Unsigned32,read-create,,current,,The relative order in which classifier elements are applied: higher numbers represent classifier element with higher precedence. Classifier elements with the same order must be unambiguous i.e. they must define non-overlapping patterns, and are considered to be applied simultaneously to the traffic stream. Classifier elements with different order may overlap in their filters: the classifier element with the highest order that matches is taken. On a given interface, there must be a complete classifier in place at all times in the ingress direction. This means one or more filters must match any possible pattern. There is no such requirement in the egress direction.
.1.3.6.1.2.1.97.1.2.4.1.3,DIFFSERV-MIB::diffServClfrElementNext,OBJECT,read-create,,current,,This attribute provides one branch of the fan-out functionality of a classifier described in the Informal Differentiated Services Model section 4.1. This selects the next Differentiated Services Functional Data Path Element to handle traffic for this data path. This RowPointer should point to an instance of one of: diffServClfrEntry diffServMeterEntry diffServActionEntry diffServAlgDropEntry diffServQEntry A value of zeroDotZero in this attribute indicates no further Differentiated Services treatment is performed on traffic of this data path. The use of zeroDotZero is the normal usage for the last functional data path element of the current data path. Setting this to point to a target that does not exist results in an inconsistentValue error. If the row pointed to is removed or becomes inactive by other means, the treatment is as if this attribute contains a value of zeroDotZero.
.1.3.6.1.2.1.97.1.2.4.1.4,DIFFSERV-MIB::diffServClfrElementSpecific,OBJECT,read-create,,current,,A pointer to a valid entry in another table, filter table, that describes the applicable classification parameters, e.g. an entry in diffServMultiFieldClfrTable. The value zeroDotZero is interpreted to match anything not matched by another classifier element - only one such entry may exist for each classifier. Setting this to point to a target that does not exist results in an inconsistentValue error. If the row pointed to is removed or becomes inactive by other means, the element is ignored.
.1.3.6.1.2.1.97.1.2.4.1.5,DIFFSERV-MIB::diffServClfrElementStorage,INTEGER,read-create,,current,other(1):volatile(2):nonVolatile(3):permanent(4):readOnly(5),The storage type for this conceptual row. Conceptual rows having the value 'permanent' need not allow write-access to any columnar objects in the row.
.1.3.6.1.2.1.97.1.2.4.1.6,DIFFSERV-MIB::diffServClfrElementStatus,INTEGER,read-create,,current,active(1):notInService(2):notReady(3):createAndGo(4):createAndWait(5):destroy(6),The status of this conceptual row. All writable objects in this row may be modified at any time. Setting this variable to 'destroy' when the MIB contains one or more RowPointers pointing to it results in destruction being delayed until the row is no longer used.
.1.3.6.1.2.1.97.1.2.5,DIFFSERV-MIB::diffServMultiFieldClfrNextFree,Unsigned32,read-only,,current,,This object contains an unused value for diffServMultiFieldClfrId, or a zero to indicate that none exist.
.1.3.6.1.2.1.97.1.2.6,DIFFSERV-MIB::diffServMultiFieldClfrTable,,not-accessible,,current,,A table of IP Multi-field Classifier filter entries that a system may use to identify IP traffic.
.1.3.6.1.2.1.97.1.2.6.1,DIFFSERV-MIB::diffServMultiFieldClfrEntry,,not-accessible,diffServMultiFieldClfrId,current,,An IP Multi-field Classifier entry describes a single filter.
.1.3.6.1.2.1.97.1.2.6.1.1,DIFFSERV-MIB::diffServMultiFieldClfrId,Unsigned32,not-accessible,,current,,An index that enumerates the MultiField Classifier filter entries. Managers obtain new values for row creation in this table by reading diffServMultiFieldClfrNextFree.
.1.3.6.1.2.1.97.1.2.6.1.2,DIFFSERV-MIB::diffServMultiFieldClfrAddrType,INTEGER,read-create,,current,unknown(0):ipv4(1):ipv6(2):ipv4z(3):ipv6z(4):dns(16),The type of IP address used by this classifier entry. While other types of addresses are defined in the InetAddressType textual convention, and DNS names, a classifier can only look at packets on the wire. Therefore, this object is limited to IPv4 and IPv6 addresses.
.1.3.6.1.2.1.97.1.2.6.1.3,DIFFSERV-MIB::diffServMultiFieldClfrDstAddr,OCTET,read-create,,current,,The IP address to match against the packet's destination IP address. This may not be a DNS name, but may be an IPv4 or IPv6 prefix. diffServMultiFieldClfrDstPrefixLength indicates the number of bits that are relevant.
.1.3.6.1.2.1.97.1.2.6.1.4,DIFFSERV-MIB::diffServMultiFieldClfrDstPrefixLength,Unsigned32,read-create,,current,,The length of the CIDR Prefix carried in diffServMultiFieldClfrDstAddr. In IPv4 addresses, a length of 0 indicates a match of any address; a length of 32 indicates a match of a single host address, and a length between 0 and 32 indicates the use of a CIDR Prefix. IPv6 is similar, except that prefix lengths range from 0..128.
.1.3.6.1.2.1.97.1.2.6.1.5,DIFFSERV-MIB::diffServMultiFieldClfrSrcAddr,OCTET,read-create,,current,,The IP address to match against the packet's source IP address. This may not be a DNS name, but may be an IPv4 or IPv6 prefix. diffServMultiFieldClfrSrcPrefixLength indicates the number of bits that are relevant.
.1.3.6.1.2.1.97.1.2.6.1.6,DIFFSERV-MIB::diffServMultiFieldClfrSrcPrefixLength,Unsigned32,read-create,,current,,The length of the CIDR Prefix carried in diffServMultiFieldClfrSrcAddr. In IPv4 addresses, a length of 0 indicates a match of any address; a length of 32 indicates a match of a single host address, and a length between 0 and 32 indicates the use of a CIDR Prefix. IPv6 is similar, except that prefix lengths range from 0..128.
.1.3.6.1.2.1.97.1.2.6.1.7,DIFFSERV-MIB::diffServMultiFieldClfrDscp,Integer32,read-create,,current,,The value that the DSCP in the packet must have to match this entry. A value of -1 indicates that a specific DSCP value has not been defined and thus all DSCP values are considered a match.
.1.3.6.1.2.1.97.1.2.6.1.8,DIFFSERV-MIB::diffServMultiFieldClfrFlowId,Unsigned32,read-create,,current,,The flow identifier in an IPv6 header.
.1.3.6.1.2.1.97.1.2.6.1.9,DIFFSERV-MIB::diffServMultiFieldClfrProtocol,Unsigned32,read-create,,current,,The IP protocol to match against the IPv4 protocol number or the IPv6 Next- Header number in the packet. A value of 255 means match all. Note the protocol number of 255 is reserved by IANA, and Next-Header number of 0 is used in IPv6.
.1.3.6.1.2.1.97.1.2.6.1.10,DIFFSERV-MIB::diffServMultiFieldClfrDstL4PortMin,Unsigned32,read-create,,current,,The minimum value that the layer-4 destination port number in the packet must have in order to match this classifier entry.
.1.3.6.1.2.1.97.1.2.6.1.11,DIFFSERV-MIB::diffServMultiFieldClfrDstL4PortMax,Unsigned32,read-create,,current,,The maximum value that the layer-4 destination port number in the packet must have in order to match this classifier entry. This value must be equal to or greater than the value specified for this entry in diffServMultiFieldClfrDstL4PortMin.
.1.3.6.1.2.1.97.1.2.6.1.12,DIFFSERV-MIB::diffServMultiFieldClfrSrcL4PortMin,Unsigned32,read-create,,current,,The minimum value that the layer-4 source port number in the packet must have in order to match this classifier entry.
.1.3.6.1.2.1.97.1.2.6.1.13,DIFFSERV-MIB::diffServMultiFieldClfrSrcL4PortMax,Unsigned32,read-create,,current,,The maximum value that the layer-4 source port number in the packet must have in order to match this classifier entry. This value must be equal to or greater than the value specified for this entry in diffServMultiFieldClfrSrcL4PortMin.
.1.3.6.1.2.1.97.1.2.6.1.14,DIFFSERV-MIB::diffServMultiFieldClfrStorage,INTEGER,read-create,,current,other(1):volatile(2):nonVolatile(3):permanent(4):readOnly(5),The storage type for this conceptual row. Conceptual rows having the value 'permanent' need not allow write-access to any columnar objects in the row.
.1.3.6.1.2.1.97.1.2.6.1.15,DIFFSERV-MIB::diffServMultiFieldClfrStatus,INTEGER,read-create,,current,active(1):notInService(2):notReady(3):createAndGo(4):createAndWait(5):destroy(6),The status of this conceptual row. All writable objects in this row may be modified at any time. Setting this variable to 'destroy' when the MIB contains one or more RowPointers pointing to it results in destruction being delayed until the row is no longer used.
.1.3.6.1.2.1.97.1.3,DIFFSERV-MIB::diffServMeter,,,,,,
.1.3.6.1.2.1.97.1.3.1,DIFFSERV-MIB::diffServMeterNextFree,Unsigned32,read-only,,current,,This object contains an unused value for diffServMeterId, or a zero to indicate that none exist.
.1.3.6.1.2.1.97.1.3.2,DIFFSERV-MIB::diffServMeterTable,,not-accessible,,current,,This table enumerates specific meters that a system may use to police a stream of traffic. The traffic stream to be metered is determined by the Differentiated Services Functional Data Path Element(s) upstream of the meter i.e. by the object(s) that point to each entry in this table. This may include all traffic on an interface. Specific meter details are to be found in table entry referenced by diffServMeterSpecific.
.1.3.6.1.2.1.97.1.3.2.1,DIFFSERV-MIB::diffServMeterEntry,,not-accessible,diffServMeterId,current,,An entry in the meter table describes a single conformance level of a meter.
.1.3.6.1.2.1.97.1.3.2.1.1,DIFFSERV-MIB::diffServMeterId,Unsigned32,not-accessible,,current,,An index that enumerates the Meter entries. Managers obtain new values for row creation in this table by reading diffServMeterNextFree.
.1.3.6.1.2.1.97.1.3.2.1.2,DIFFSERV-MIB::diffServMeterSucceedNext,OBJECT,read-create,,current,,If the traffic does conform, this selects the next Differentiated Services Functional Data Path element to handle traffic for this data path. This RowPointer should point to an instance of one of: diffServClfrEntry diffServMeterEntry diffServActionEntry diffServAlgDropEntry diffServQEntry A value of zeroDotZero in this attribute indicates that no further Differentiated Services treatment is performed on traffic of this data path. The use of zeroDotZero is the normal usage for the last functional data path element of the current data path. Setting this to point to a target that does not exist results in an inconsistentValue error. If the row pointed to is removed or becomes inactive by other means, the treatment is as if this attribute contains a value of zeroDotZero.
.1.3.6.1.2.1.97.1.3.2.1.3,DIFFSERV-MIB::diffServMeterFailNext,OBJECT,read-create,,current,,If the traffic does not conform, this selects the next Differentiated Services Functional Data Path element to handle traffic for this data path. This RowPointer should point to an instance of one of: diffServClfrEntry diffServMeterEntry diffServActionEntry diffServAlgDropEntry diffServQEntry A value of zeroDotZero in this attribute indicates no further Differentiated Services treatment is performed on traffic of this data path. The use of zeroDotZero is the normal usage for the last functional data path element of the current data path. Setting this to point to a target that does not exist results in an inconsistentValue error. If the row pointed to is removed or becomes inactive by other means, the treatment is as if this attribute contains a value of zeroDotZero.
.1.3.6.1.2.1.97.1.3.2.1.4,DIFFSERV-MIB::diffServMeterSpecific,OBJECT,read-create,,current,,This indicates the behavior of the meter by pointing to an entry containing detailed parameters. Note that entries in that specific table must be managed explicitly. For example, diffServMeterSpecific may point to an entry in diffServTBParamTable, which contains an instance of a single set of Token Bucket parameters. Setting this to point to a target that does not exist results in an inconsistentValue error. If the row pointed to is removed or becomes inactive by other means, the meter always succeeds.
.1.3.6.1.2.1.97.1.3.2.1.5,DIFFSERV-MIB::diffServMeterStorage,INTEGER,read-create,,current,other(1):volatile(2):nonVolatile(3):permanent(4):readOnly(5),The storage type for this conceptual row. Conceptual rows having the value 'permanent' need not allow write-access to any columnar objects in the row.
.1.3.6.1.2.1.97.1.3.2.1.6,DIFFSERV-MIB::diffServMeterStatus,INTEGER,read-create,,current,active(1):notInService(2):notReady(3):createAndGo(4):createAndWait(5):destroy(6),The status of this conceptual row. All writable objects in this row may be modified at any time. Setting this variable to 'destroy' when the MIB contains one or more RowPointers pointing to it results in destruction being delayed until the row is no longer used.
.1.3.6.1.2.1.97.1.4,DIFFSERV-MIB::diffServTBParam,,,,,,
.1.3.6.1.2.1.97.1.4.1,DIFFSERV-MIB::diffServTBParamNextFree,Unsigned32,read-only,,current,,This object contains an unused value for diffServTBParamId, or a zero to indicate that none exist.
.1.3.6.1.2.1.97.1.4.2,DIFFSERV-MIB::diffServTBParamTable,,not-accessible,,current,,This table enumerates a single set of token bucket meter parameters that a system may use to police a stream of traffic. Such meters are modeled here as having a single rate and a single burst size. Multiple entries are used when multiple rates/burst sizes are needed.
.1.3.6.1.2.1.97.1.4.2.1,DIFFSERV-MIB::diffServTBParamEntry,,not-accessible,diffServTBParamId,current,,An entry that describes a single set of token bucket parameters.
.1.3.6.1.2.1.97.1.4.2.1.1,DIFFSERV-MIB::diffServTBParamId,Unsigned32,not-accessible,,current,,An index that enumerates the Token Bucket Parameter entries. Managers obtain new values for row creation in this table by reading diffServTBParamNextFree.
.1.3.6.1.2.1.97.1.4.2.1.2,DIFFSERV-MIB::diffServTBParamType,OBJECT,read-create,,current,,The Metering algorithm associated with the Token Bucket parameters. zeroDotZero indicates this is unknown. Standard values for generic algorithms: diffServTBParamSimpleTokenBucket, diffServTBParamAvgRate, diffServTBParamSrTCMBlind, diffServTBParamSrTCMAware, diffServTBParamTrTCMBlind, diffServTBParamTrTCMAware, and diffServTBParamTswTCM are specified in this MIB as OBJECT- IDENTITYs; additional values may be further specified in other MIBs.
.1.3.6.1.2.1.97.1.4.2.1.3,DIFFSERV-MIB::diffServTBParamRate,Unsigned32,read-create,,current,,The token-bucket rate, in kilobits per second (kbps). This attribute is used for: 1. CIR in RFC 2697 for srTCM 2. CIR and PIR in RFC 2698 for trTCM 3. CTR and PTR in RFC 2859 for TSWTCM 4. AverageRate in RFC 3290.
.1.3.6.1.2.1.97.1.4.2.1.4,DIFFSERV-MIB::diffServTBParamBurstSize,INTEGER,read-create,,current,,The maximum number of bytes in a single transmission burst. This attribute is used for: 1. CBS and EBS in RFC 2697 for srTCM 2. CBS and PBS in RFC 2698 for trTCM 3. Burst Size in RFC 3290.
.1.3.6.1.2.1.97.1.4.2.1.5,DIFFSERV-MIB::diffServTBParamInterval,Unsigned32,read-create,,current,,The time interval used with the token bucket. For: 1. Average Rate Meter, the Informal Differentiated Services Model section 5.2.1, - Delta. 2. Simple Token Bucket Meter, the Informal Differentiated Services Model section 5.1, - time interval t. 3. RFC 2859 TSWTCM, - AVG_INTERVAL. 4. RFC 2697 srTCM, RFC 2698 trTCM, - token bucket update time interval.
.1.3.6.1.2.1.97.1.4.2.1.6,DIFFSERV-MIB::diffServTBParamStorage,INTEGER,read-create,,current,other(1):volatile(2):nonVolatile(3):permanent(4):readOnly(5),The storage type for this conceptual row. Conceptual rows having the value 'permanent' need not allow write-access to any columnar objects in the row.
.1.3.6.1.2.1.97.1.4.2.1.7,DIFFSERV-MIB::diffServTBParamStatus,INTEGER,read-create,,current,active(1):notInService(2):notReady(3):createAndGo(4):createAndWait(5):destroy(6),The status of this conceptual row. All writable objects in this row may be modified at any time. Setting this variable to 'destroy' when the MIB contains one or more RowPointers pointing to it results in destruction being delayed until the row is no longer used.
.1.3.6.1.2.1.97.1.5,DIFFSERV-MIB::diffServAction,,,,,,
.1.3.6.1.2.1.97.1.5.1,DIFFSERV-MIB::diffServActionNextFree,Unsigned32,read-only,,current,,This object contains an unused value for diffServActionId, or a zero to indicate that none exist.
.1.3.6.1.2.1.97.1.5.2,DIFFSERV-MIB::diffServActionTable,,not-accessible,,current,,The Action Table enumerates actions that can be performed to a stream of traffic. Multiple actions can be concatenated. For example, traffic exiting from a meter may be counted, marked, and potentially dropped before entering a queue. Specific actions are indicated by diffServActionSpecific which points to an entry of a specific action type parameterizing the action in detail.
.1.3.6.1.2.1.97.1.5.2.1,DIFFSERV-MIB::diffServActionEntry,,not-accessible,diffServActionId,current,,Each entry in the action table allows description of one specific action to be applied to traffic.
.1.3.6.1.2.1.97.1.5.2.1.1,DIFFSERV-MIB::diffServActionId,Unsigned32,not-accessible,,current,,An index that enumerates the Action entries. Managers obtain new values for row creation in this table by reading diffServActionNextFree.
.1.3.6.1.2.1.97.1.5.2.1.2,DIFFSERV-MIB::diffServActionInterface,Integer32,read-create,,current,,The interface index (value of ifIndex) that this action occurs on. This may be derived from the diffServDataPathStartEntry's index by extension through the various RowPointers. However, as this may be difficult for a network management station, it is placed here as well. If this is indeterminate, the value is zero. This is of especial relevance when reporting the counters which may apply to traffic crossing an interface: diffServCountActOctets, diffServCountActPkts, diffServAlgDropOctets, diffServAlgDropPkts, diffServAlgRandomDropOctets, and diffServAlgRandomDropPkts. It is also especially relevant to the queue and scheduler which may be subsequently applied.
.1.3.6.1.2.1.97.1.5.2.1.3,DIFFSERV-MIB::diffServActionNext,OBJECT,read-create,,current,,This selects the next Differentiated Services Functional Data Path Element to handle traffic for this data path. This RowPointer should point to an instance of one of: diffServClfrEntry diffServMeterEntry diffServActionEntry diffServAlgDropEntry diffServQEntry A value of zeroDotZero in this attribute indicates no further Differentiated Services treatment is performed on traffic of this data path. The use of zeroDotZero is the normal usage for the last functional data path element of the current data path. Setting this to point to a target that does not exist results in an inconsistentValue error. If the row pointed to is removed or becomes inactive by other means, the treatment is as if this attribute contains a value of zeroDotZero.
.1.3.6.1.2.1.97.1.5.2.1.4,DIFFSERV-MIB::diffServActionSpecific,OBJECT,read-create,,current,,A pointer to an object instance providing additional information for the type of action indicated by this action table entry. For the standard actions defined by this MIB module, this should point to either a diffServDscpMarkActEntry or a diffServCountActEntry. For other actions, it may point to an object instance defined in some other MIB. Setting this to point to a target that does not exist results in an inconsistentValue error. If the row pointed to is removed or becomes inactive by other means, the Meter should be treated as if it were not present. This may lead to incorrect policy behavior.
.1.3.6.1.2.1.97.1.5.2.1.5,DIFFSERV-MIB::diffServActionStorage,INTEGER,read-create,,current,other(1):volatile(2):nonVolatile(3):permanent(4):readOnly(5),The storage type for this conceptual row. Conceptual rows having the value 'permanent' need not allow write-access to any columnar objects in the row.
.1.3.6.1.2.1.97.1.5.2.1.6,DIFFSERV-MIB::diffServActionStatus,INTEGER,read-create,,current,active(1):notInService(2):notReady(3):createAndGo(4):createAndWait(5):destroy(6),The status of this conceptual row. All writable objects in this row may be modified at any time. Setting this variable to 'destroy' when the MIB contains one or more RowPointers pointing to it results in destruction being delayed until the row is no longer used.
.1.3.6.1.2.1.97.1.5.3,DIFFSERV-MIB::diffServDscpMarkActTable,,not-accessible,,current,,This table enumerates specific DSCPs used for marking or remarking the DSCP field of IP packets. The entries of this table may be referenced by a diffServActionSpecific attribute.
.1.3.6.1.2.1.97.1.5.3.1,DIFFSERV-MIB::diffServDscpMarkActEntry,,not-accessible,diffServDscpMarkActDscp,current,,An entry in the DSCP mark action table that describes a single DSCP used for marking.
.1.3.6.1.2.1.97.1.5.3.1.1,DIFFSERV-MIB::diffServDscpMarkActDscp,Integer32,read-only,,current,,The DSCP that this Action will store into the DSCP field of the subject. It is quite possible that the only packets subject to this Action are already marked with this DSCP. Note also that Differentiated Services processing may result in packet being marked on both ingress to a network and on egress from it, and that ingress and egress can occur in the same router.
.1.3.6.1.2.1.97.1.5.4,DIFFSERV-MIB::diffServCountActNextFree,Unsigned32,read-only,,current,,This object contains an unused value for diffServCountActId, or a zero to indicate that none exist.
.1.3.6.1.2.1.97.1.5.5,DIFFSERV-MIB::diffServCountActTable,,not-accessible,,current,,This table contains counters for all the traffic passing through an action element.
.1.3.6.1.2.1.97.1.5.5.1,DIFFSERV-MIB::diffServCountActEntry,,not-accessible,diffServCountActId,current,,An entry in the count action table describes a single set of traffic counters.
.1.3.6.1.2.1.97.1.5.5.1.1,DIFFSERV-MIB::diffServCountActId,Unsigned32,not-accessible,,current,,An index that enumerates the Count Action entries. Managers obtain new values for row creation in this table by reading diffServCountActNextFree.
.1.3.6.1.2.1.97.1.5.5.1.2,DIFFSERV-MIB::diffServCountActOctets,Counter64,read-only,,current,,The number of octets at the Action data path element. Discontinuities in the value of this counter can occur at re- initialization of the management system and at other times as indicated by the value of ifCounterDiscontinuityTime on the relevant interface.
.1.3.6.1.2.1.97.1.5.5.1.3,DIFFSERV-MIB::diffServCountActPkts,Counter64,read-only,,current,,The number of packets at the Action data path element. Discontinuities in the value of this counter can occur at re- initialization of the management system and at other times as indicated by the value of ifCounterDiscontinuityTime on the relevant interface.
.1.3.6.1.2.1.97.1.5.5.1.4,DIFFSERV-MIB::diffServCountActStorage,INTEGER,read-create,,current,other(1):volatile(2):nonVolatile(3):permanent(4):readOnly(5),The storage type for this conceptual row. Conceptual rows having the value 'permanent' need not allow write-access to any columnar objects in the row.
.1.3.6.1.2.1.97.1.5.5.1.5,DIFFSERV-MIB::diffServCountActStatus,INTEGER,read-create,,current,active(1):notInService(2):notReady(3):createAndGo(4):createAndWait(5):destroy(6),The status of this conceptual row. All writable objects in this row may be modified at any time. Setting this variable to 'destroy' when the MIB contains one or more RowPointers pointing to it results in destruction being delayed until the row is no longer used.
.1.3.6.1.2.1.97.1.6,DIFFSERV-MIB::diffServAlgDrop,,,,,,
.1.3.6.1.2.1.97.1.6.1,DIFFSERV-MIB::diffServAlgDropNextFree,Unsigned32,read-only,,current,,This object contains an unused value for diffServAlgDropId, or a zero to indicate that none exist.
.1.3.6.1.2.1.97.1.6.2,DIFFSERV-MIB::diffServAlgDropTable,,not-accessible,,current,,The algorithmic drop table contains entries describing an element that drops packets according to some algorithm.
.1.3.6.1.2.1.97.1.6.2.1,DIFFSERV-MIB::diffServAlgDropEntry,,not-accessible,diffServAlgDropId,current,,An entry describes a process that drops packets according to some algorithm. Further details of the algorithm type are to be found in diffServAlgDropType and with more detail parameter entry pointed to by diffServAlgDropSpecific when necessary.
.1.3.6.1.2.1.97.1.6.2.1.1,DIFFSERV-MIB::diffServAlgDropId,Unsigned32,not-accessible,,current,,An index that enumerates the Algorithmic Dropper entries. Managers obtain new values for row creation in this table by reading diffServAlgDropNextFree.
.1.3.6.1.2.1.97.1.6.2.1.2,DIFFSERV-MIB::diffServAlgDropType,INTEGER,read-create,,current,other(1):tailDrop(2):headDrop(3):randomDrop(4):alwaysDrop(5),The type of algorithm used by this dropper. The value other(1) requires further specification in some other MIB module. In the tailDrop(2) algorithm, diffServAlgDropQThreshold represents the maximum depth of the queue, pointed to by diffServAlgDropQMeasure, beyond which all newly arriving packets will be dropped. In the headDrop(3) algorithm, if a packet arrives when the current depth of the queue, pointed to by diffServAlgDropQMeasure, is at diffServAlgDropQThreshold, packets currently at the head of the queue are dropped to make room for the new packet to be enqueued at the tail of the queue. In the randomDrop(4) algorithm, on packet arrival, an Active Queue Management algorithm is executed which may randomly drop a packet. This algorithm may be proprietary, and it may drop either the arriving packet or another packet in the queue. diffServAlgDropSpecific points to a diffServRandomDropEntry that describes the algorithm. For this algorithm, diffServAlgDropQThreshold is understood to be the absolute maximum size of the queue and additional parameters are described in diffServRandomDropTable. The alwaysDrop(5) algorithm is as its name specifies; always drop. In this case, the other configuration values in this Entry are not meaningful; There is no useful 'next' processing step, there is no queue, and parameters describing the queue are not useful. Therefore, diffServAlgDropNext, diffServAlgDropMeasure, and diffServAlgDropSpecific are all zeroDotZero.
.1.3.6.1.2.1.97.1.6.2.1.3,DIFFSERV-MIB::diffServAlgDropNext,OBJECT,read-create,,current,,This selects the next Differentiated Services Functional Data Path Element to handle traffic for this data path. This RowPointer should point to an instance of one of: diffServClfrEntry diffServMeterEntry diffServActionEntry diffServQEntry A value of zeroDotZero in this attribute indicates no further Differentiated Services treatment is performed on traffic of this data path. The use of zeroDotZero is the normal usage for the last functional data path element of the current data path. When diffServAlgDropType is alwaysDrop(5), this object is ignored. Setting this to point to a target that does not exist results in an inconsistentValue error. If the row pointed to is removed or becomes inactive by other means, the treatment is as if this attribute contains a value of zeroDotZero.
.1.3.6.1.2.1.97.1.6.2.1.4,DIFFSERV-MIB::diffServAlgDropQMeasure,OBJECT,read-create,,current,,Points to an entry in the diffServQTable to indicate the queue that a drop algorithm is to monitor when deciding whether to drop a packet. If the row pointed to does not exist, the algorithmic dropper element is considered inactive. Setting this to point to a target that does not exist results in an inconsistentValue error. If the row pointed to is removed or becomes inactive by other means, the treatment is as if this attribute contains a value of zeroDotZero.
.1.3.6.1.2.1.97.1.6.2.1.5,DIFFSERV-MIB::diffServAlgDropQThreshold,Unsigned32,read-create,,current,,A threshold on the depth in bytes of the queue being measured at which a trigger is generated to the dropping algorithm, unless diffServAlgDropType is alwaysDrop(5) where this object is ignored. For the tailDrop(2) or headDrop(3) algorithms, this represents the depth of the queue, pointed to by diffServAlgDropQMeasure, at which the drop action will take place. Other algorithms will need to define their own semantics for this threshold.
.1.3.6.1.2.1.97.1.6.2.1.6,DIFFSERV-MIB::diffServAlgDropSpecific,OBJECT,read-create,,current,,Points to a table entry that provides further detail regarding a drop algorithm. Entries with diffServAlgDropType equal to other(1) may have this point to a table defined in another MIB module. Entries with diffServAlgDropType equal to randomDrop(4) must have this point to an entry in diffServRandomDropTable. For all other algorithms specified in this MIB, this should take the value zeroDotZero. The diffServAlgDropType is authoritative for the type of the drop algorithm and the specific parameters for the drop algorithm needs to be evaluated based on the diffServAlgDropType. Setting this to point to a target that does not exist results in an inconsistentValue error. If the row pointed to is removed or becomes inactive by other means, the treatment is as if this attribute contains a value of zeroDotZero.
.1.3.6.1.2.1.97.1.6.2.1.7,DIFFSERV-MIB::diffServAlgDropOctets,Counter64,read-only,,current,,The number of octets that have been deterministically dropped by this drop process. Discontinuities in the value of this counter can occur at re- initialization of the management system and at other times as indicated by the value of ifCounterDiscontinuityTime on the relevant interface.
.1.3.6.1.2.1.97.1.6.2.1.8,DIFFSERV-MIB::diffServAlgDropPkts,Counter64,read-only,,current,,The number of packets that have been deterministically dropped by this drop process. Discontinuities in the value of this counter can occur at re- initialization of the management system and at other times as indicated by the value of ifCounterDiscontinuityTime on the relevant interface.
.1.3.6.1.2.1.97.1.6.2.1.9,DIFFSERV-MIB::diffServAlgRandomDropOctets,Counter64,read-only,,current,,The number of octets that have been randomly dropped by this drop process. This counter applies, therefore, only to random droppers. Discontinuities in the value of this counter can occur at re- initialization of the management system and at other times as indicated by the value of ifCounterDiscontinuityTime on the relevant interface.
.1.3.6.1.2.1.97.1.6.2.1.10,DIFFSERV-MIB::diffServAlgRandomDropPkts,Counter64,read-only,,current,,The number of packets that have been randomly dropped by this drop process. This counter applies, therefore, only to random droppers. Discontinuities in the value of this counter can occur at re- initialization of the management system and at other times as indicated by the value of ifCounterDiscontinuityTime on the relevant interface.
.1.3.6.1.2.1.97.1.6.2.1.11,DIFFSERV-MIB::diffServAlgDropStorage,INTEGER,read-create,,current,other(1):volatile(2):nonVolatile(3):permanent(4):readOnly(5),The storage type for this conceptual row. Conceptual rows having the value 'permanent' need not allow write-access to any columnar objects in the row.
.1.3.6.1.2.1.97.1.6.2.1.12,DIFFSERV-MIB::diffServAlgDropStatus,INTEGER,read-create,,current,active(1):notInService(2):notReady(3):createAndGo(4):createAndWait(5):destroy(6),The status of this conceptual row. All writable objects in this row may be modified at any time. Setting this variable to 'destroy' when the MIB contains one or more RowPointers pointing to it results in destruction being delayed until the row is no longer used.
.1.3.6.1.2.1.97.1.6.3,DIFFSERV-MIB::diffServRandomDropNextFree,Unsigned32,read-only,,current,,This object contains an unused value for diffServRandomDropId, or a zero to indicate that none exist.
.1.3.6.1.2.1.97.1.6.4,DIFFSERV-MIB::diffServRandomDropTable,,not-accessible,,current,,The random drop table contains entries describing a process that drops packets randomly. Entries in this table are pointed to by diffServAlgDropSpecific.
.1.3.6.1.2.1.97.1.6.4.1,DIFFSERV-MIB::diffServRandomDropEntry,,not-accessible,diffServRandomDropId,current,,An entry describes a process that drops packets according to a random algorithm.
.1.3.6.1.2.1.97.1.6.4.1.1,DIFFSERV-MIB::diffServRandomDropId,Unsigned32,not-accessible,,current,,An index that enumerates the Random Drop entries. Managers obtain new values for row creation in this table by reading diffServRandomDropNextFree.
.1.3.6.1.2.1.97.1.6.4.1.2,DIFFSERV-MIB::diffServRandomDropMinThreshBytes,Unsigned32,read-create,,current,,The average queue depth in bytes, beyond which traffic has a non-zero probability of being dropped. Changes in this variable may or may not be reflected in the reported value of diffServRandomDropMinThreshPkts.
.1.3.6.1.2.1.97.1.6.4.1.3,DIFFSERV-MIB::diffServRandomDropMinThreshPkts,Unsigned32,read-create,,current,,The average queue depth in packets, beyond which traffic has a non-zero probability of being dropped. Changes in this variable may or may not be reflected in the reported value of diffServRandomDropMinThreshBytes.
.1.3.6.1.2.1.97.1.6.4.1.4,DIFFSERV-MIB::diffServRandomDropMaxThreshBytes,Unsigned32,read-create,,current,,The average queue depth beyond which traffic has a probability indicated by diffServRandomDropProbMax of being dropped or marked. Note that this differs from the physical queue limit, which is stored in diffServAlgDropQThreshold. Changes in this variable may or may not be reflected in the reported value of diffServRandomDropMaxThreshPkts.
.1.3.6.1.2.1.97.1.6.4.1.5,DIFFSERV-MIB::diffServRandomDropMaxThreshPkts,Unsigned32,read-create,,current,,The average queue depth beyond which traffic has a probability indicated by diffServRandomDropProbMax of being dropped or marked. Note that this differs from the physical queue limit, which is stored in diffServAlgDropQThreshold. Changes in this variable may or may not be reflected in the reported value of diffServRandomDropMaxThreshBytes.
.1.3.6.1.2.1.97.1.6.4.1.6,DIFFSERV-MIB::diffServRandomDropProbMax,Unsigned32,read-create,,current,,The worst case random drop probability, expressed in drops per thousand packets. For example, if in the worst case every arriving packet may be dropped (100%) for a period, this has the value 1000. Alternatively, if in the worst case only one percent (1%) of traffic may be dropped, it has the value 10.
.1.3.6.1.2.1.97.1.6.4.1.7,DIFFSERV-MIB::diffServRandomDropWeight,Unsigned32,read-create,,current,,The weighting of past history in affecting the Exponentially Weighted Moving Average function that calculates the current average queue depth. The equation uses diffServRandomDropWeight/65536 as the coefficient for the new sample in the equation, and (65536 - diffServRandomDropWeight)/65536 as the coefficient of the old value. Implementations may limit the values of diffServRandomDropWeight to a subset of the possible range of values, such as powers of two. Doing this would facilitate implementation of the Exponentially Weighted Moving Average using shift instructions or registers.
.1.3.6.1.2.1.97.1.6.4.1.8,DIFFSERV-MIB::diffServRandomDropSamplingRate,Unsigned32,read-create,,current,,The number of times per second the queue is sampled for queue average calculation. A value of zero is used to mean that the queue is sampled approximately each time a packet is enqueued (or dequeued).
.1.3.6.1.2.1.97.1.6.4.1.9,DIFFSERV-MIB::diffServRandomDropStorage,INTEGER,read-create,,current,other(1):volatile(2):nonVolatile(3):permanent(4):readOnly(5),The storage type for this conceptual row. Conceptual rows having the value 'permanent' need not allow write-access to any columnar objects in the row.
.1.3.6.1.2.1.97.1.6.4.1.10,DIFFSERV-MIB::diffServRandomDropStatus,INTEGER,read-create,,current,active(1):notInService(2):notReady(3):createAndGo(4):createAndWait(5):destroy(6),The status of this conceptual row. All writable objects in this row may be modified at any time. Setting this variable to 'destroy' when the MIB contains one or more RowPointers pointing to it results in destruction being delayed until the row is no longer used.
.1.3.6.1.2.1.97.1.7,DIFFSERV-MIB::diffServQueue,,,,,,
.1.3.6.1.2.1.97.1.7.1,DIFFSERV-MIB::diffServQNextFree,Unsigned32,read-only,,current,,This object contains an unused value for diffServQId, or a zero to indicate that none exist.
.1.3.6.1.2.1.97.1.7.2,DIFFSERV-MIB::diffServQTable,,not-accessible,,current,,The Queue Table enumerates the individual queues. Note that the MIB models queuing systems as composed of individual queues, one per class of traffic, even though they may in fact be structured as classes of traffic scheduled using a common calendar queue, or in other ways.
.1.3.6.1.2.1.97.1.7.2.1,DIFFSERV-MIB::diffServQEntry,,not-accessible,diffServQId,current,,An entry in the Queue Table describes a single queue or class of traffic.
.1.3.6.1.2.1.97.1.7.2.1.1,DIFFSERV-MIB::diffServQId,Unsigned32,not-accessible,,current,,An index that enumerates the Queue entries. Managers obtain new values for row creation in this table by reading diffServQNextFree.
.1.3.6.1.2.1.97.1.7.2.1.2,DIFFSERV-MIB::diffServQNext,OBJECT,read-create,,current,,This selects the next Differentiated Services Scheduler. The RowPointer must point to a diffServSchedulerEntry. A value of zeroDotZero in this attribute indicates an incomplete diffServQEntry instance. In such a case, the entry has no operational effect, since it has no parameters to give it meaning. Setting this to point to a target that does not exist results in an inconsistentValue error. If the row pointed to is removed or becomes inactive by other means, the treatment is as if this attribute contains a value of zeroDotZero.
.1.3.6.1.2.1.97.1.7.2.1.3,DIFFSERV-MIB::diffServQMinRate,OBJECT,read-create,,current,,This RowPointer indicates the diffServMinRateEntry that the scheduler, pointed to by diffServQNext, should use to service this queue. If the row pointed to is zeroDotZero, the minimum rate and priority is unspecified. Setting this to point to a target that does not exist results in an inconsistentValue error. If the row pointed to is removed or becomes inactive by other means, the treatment is as if this attribute contains a value of zeroDotZero.
.1.3.6.1.2.1.97.1.7.2.1.4,DIFFSERV-MIB::diffServQMaxRate,OBJECT,read-create,,current,,This RowPointer indicates the diffServMaxRateEntry that the scheduler, pointed to by diffServQNext, should use to service this queue. If the row pointed to is zeroDotZero, the maximum rate is the line speed of the interface. Setting this to point to a target that does not exist results in an inconsistentValue error. If the row pointed to is removed or becomes inactive by other means, the treatment is as if this attribute contains a value of zeroDotZero.
.1.3.6.1.2.1.97.1.7.2.1.5,DIFFSERV-MIB::diffServQStorage,INTEGER,read-create,,current,other(1):volatile(2):nonVolatile(3):permanent(4):readOnly(5),The storage type for this conceptual row. Conceptual rows having the value 'permanent' need not allow write-access to any columnar objects in the row.
.1.3.6.1.2.1.97.1.7.2.1.6,DIFFSERV-MIB::diffServQStatus,INTEGER,read-create,,current,active(1):notInService(2):notReady(3):createAndGo(4):createAndWait(5):destroy(6),The status of this conceptual row. All writable objects in this row may be modified at any time. Setting this variable to 'destroy' when the MIB contains one or more RowPointers pointing to it results in destruction being delayed until the row is no longer used.
.1.3.6.1.2.1.97.1.8,DIFFSERV-MIB::diffServScheduler,,,,,,
.1.3.6.1.2.1.97.1.8.1,DIFFSERV-MIB::diffServSchedulerNextFree,Unsigned32,read-only,,current,,This object contains an unused value for diffServSchedulerId, or a zero to indicate that none exist.
.1.3.6.1.2.1.97.1.8.2,DIFFSERV-MIB::diffServSchedulerTable,,not-accessible,,current,,The Scheduler Table enumerates packet schedulers. Multiple scheduling algorithms can be used on a given data path, with each algorithm described by one diffServSchedulerEntry.
.1.3.6.1.2.1.97.1.8.2.1,DIFFSERV-MIB::diffServSchedulerEntry,,not-accessible,diffServSchedulerId,current,,An entry in the Scheduler Table describing a single instance of a scheduling algorithm.
.1.3.6.1.2.1.97.1.8.2.1.1,DIFFSERV-MIB::diffServSchedulerId,Unsigned32,not-accessible,,current,,An index that enumerates the Scheduler entries. Managers obtain new values for row creation in this table by reading diffServSchedulerNextFree.
.1.3.6.1.2.1.97.1.8.2.1.2,DIFFSERV-MIB::diffServSchedulerNext,OBJECT,read-create,,current,,This selects the next Differentiated Services Functional Data Path Element to handle traffic for this data path. This normally is null (zeroDotZero), or points to a diffServSchedulerEntry or a diffServQEntry. However, this RowPointer may also point to an instance of: diffServClfrEntry, diffServMeterEntry, diffServActionEntry, diffServAlgDropEntry. It would point another diffServSchedulerEntry when implementing multiple scheduler methods for the same data path, such as having one set of queues scheduled by WRR and that group participating in a priority scheduling system in which other queues compete with it in that way. It might also point to a second scheduler in a hierarchical scheduling system. If the row pointed to is zeroDotZero, no further Differentiated Services treatment is performed on traffic of this data path. Setting this to point to a target that does not exist results in an inconsistentValue error. If the row pointed to is removed or becomes inactive by other means, the treatment is as if this attribute contains a value of zeroDotZero.
.1.3.6.1.2.1.97.1.8.2.1.3,DIFFSERV-MIB::diffServSchedulerMethod,OBJECT,read-create,,current,,The scheduling algorithm used by this Scheduler. zeroDotZero indicates that this is unknown. Standard values for generic algorithms: diffServSchedulerPriority, diffServSchedulerWRR, and diffServSchedulerWFQ are specified in this MIB; additional values may be further specified in other MIBs.
.1.3.6.1.2.1.97.1.8.2.1.4,DIFFSERV-MIB::diffServSchedulerMinRate,OBJECT,read-create,,current,,This RowPointer indicates the entry in diffServMinRateTable which indicates the priority or minimum output rate from this scheduler. This attribute is used only when there is more than one level of scheduler. When it has the value zeroDotZero, it indicates that no minimum rate or priority is imposed. Setting this to point to a target that does not exist results in an inconsistentValue error. If the row pointed to is removed or becomes inactive by other means, the treatment is as if this attribute contains a value of zeroDotZero.
.1.3.6.1.2.1.97.1.8.2.1.5,DIFFSERV-MIB::diffServSchedulerMaxRate,OBJECT,read-create,,current,,This RowPointer indicates the entry in diffServMaxRateTable which indicates the maximum output rate from this scheduler. When more than one maximum rate applies (eg, when a multi-rate shaper is in view), it points to the first of those rate entries. This attribute is used only when there is more than one level of scheduler. When it has the value zeroDotZero, it indicates that no maximum rate is imposed. Setting this to point to a target that does not exist results in an inconsistentValue error. If the row pointed to is removed or becomes inactive by other means, the treatment is as if this attribute contains a value of zeroDotZero.
.1.3.6.1.2.1.97.1.8.2.1.6,DIFFSERV-MIB::diffServSchedulerStorage,INTEGER,read-create,,current,other(1):volatile(2):nonVolatile(3):permanent(4):readOnly(5),The storage type for this conceptual row. Conceptual rows having the value 'permanent' need not allow write-access to any columnar objects in the row.
.1.3.6.1.2.1.97.1.8.2.1.7,DIFFSERV-MIB::diffServSchedulerStatus,INTEGER,read-create,,current,active(1):notInService(2):notReady(3):createAndGo(4):createAndWait(5):destroy(6),The status of this conceptual row. All writable objects in this row may be modified at any time. Setting this variable to 'destroy' when the MIB contains one or more RowPointers pointing to it results in destruction being delayed until the row is no longer used.
.1.3.6.1.2.1.97.1.8.3,DIFFSERV-MIB::diffServMinRateNextFree,Unsigned32,read-only,,current,,This object contains an unused value for diffServMinRateId, or a zero to indicate that none exist.
.1.3.6.1.2.1.97.1.8.4,DIFFSERV-MIB::diffServMinRateTable,,not-accessible,,current,,The Minimum Rate Parameters Table enumerates individual sets of scheduling parameter that can be used/reused by Queues and Schedulers.
.1.3.6.1.2.1.97.1.8.4.1,DIFFSERV-MIB::diffServMinRateEntry,,not-accessible,diffServMinRateId,current,,An entry in the Minimum Rate Parameters Table describes a single set of scheduling parameters for use by one or more queues or schedulers.
.1.3.6.1.2.1.97.1.8.4.1.1,DIFFSERV-MIB::diffServMinRateId,Unsigned32,not-accessible,,current,,An index that enumerates the Scheduler Parameter entries. Managers obtain new values for row creation in this table by reading diffServMinRateNextFree.
.1.3.6.1.2.1.97.1.8.4.1.2,DIFFSERV-MIB::diffServMinRatePriority,Unsigned32,read-create,,current,,The priority of this input to the associated scheduler, relative to the scheduler's other inputs. A queue or scheduler with a larger numeric value will be served before another with a smaller numeric value.
.1.3.6.1.2.1.97.1.8.4.1.3,DIFFSERV-MIB::diffServMinRateAbsolute,Unsigned32,read-create,,current,,The minimum absolute rate, in kilobits/sec, that a downstream scheduler element should allocate to this queue. If the value is zero, then there is effectively no minimum rate guarantee. If the value is non-zero, the scheduler will assure the servicing of this queue to at least this rate. Note that this attribute value and that of diffServMinRateRelative are coupled: changes to one will affect the value of the other. They are linked by the following equation, in that setting one will change the other: diffServMinRateRelative = (diffServMinRateAbsolute*1000000)/ifSpeed or, if appropriate: diffServMinRateRelative = diffServMinRateAbsolute/ifHighSpeed
.1.3.6.1.2.1.97.1.8.4.1.4,DIFFSERV-MIB::diffServMinRateRelative,Unsigned32,read-create,,current,,The minimum rate that a downstream scheduler element should allocate to this queue, relative to the maximum rate of the interface as reported by ifSpeed or ifHighSpeed, in units of 1/1000 of 1. If the value is zero, then there is effectively no minimum rate guarantee. If the value is non-zero, the scheduler will assure the servicing of this queue to at least this rate. Note that this attribute value and that of diffServMinRateAbsolute are coupled: changes to one will affect the value of the other. They are linked by the following equation, in that setting one will change the other: diffServMinRateRelative = (diffServMinRateAbsolute*1000000)/ifSpeed or, if appropriate: diffServMinRateRelative = diffServMinRateAbsolute/ifHighSpeed
.1.3.6.1.2.1.97.1.8.4.1.5,DIFFSERV-MIB::diffServMinRateStorage,INTEGER,read-create,,current,other(1):volatile(2):nonVolatile(3):permanent(4):readOnly(5),The storage type for this conceptual row. Conceptual rows having the value 'permanent' need not allow write-access to any columnar objects in the row.
.1.3.6.1.2.1.97.1.8.4.1.6,DIFFSERV-MIB::diffServMinRateStatus,INTEGER,read-create,,current,active(1):notInService(2):notReady(3):createAndGo(4):createAndWait(5):destroy(6),The status of this conceptual row. All writable objects in this row may be modified at any time. Setting this variable to 'destroy' when the MIB contains one or more RowPointers pointing to it results in destruction being delayed until the row is no longer used.
.1.3.6.1.2.1.97.1.8.5,DIFFSERV-MIB::diffServMaxRateNextFree,Unsigned32,read-only,,current,,This object contains an unused value for diffServMaxRateId, or a zero to indicate that none exist.
.1.3.6.1.2.1.97.1.8.6,DIFFSERV-MIB::diffServMaxRateTable,,not-accessible,,current,,The Maximum Rate Parameter Table enumerates individual sets of scheduling parameter that can be used/reused by Queues and Schedulers.
.1.3.6.1.2.1.97.1.8.6.1,DIFFSERV-MIB::diffServMaxRateEntry,,not-accessible,diffServMaxRateId:diffServMaxRateLevel,current,,An entry in the Maximum Rate Parameter Table describes a single set of scheduling parameters for use by one or more queues or schedulers.
.1.3.6.1.2.1.97.1.8.6.1.1,DIFFSERV-MIB::diffServMaxRateId,Unsigned32,not-accessible,,current,,An index that enumerates the Maximum Rate Parameter entries. Managers obtain new values for row creation in this table by reading diffServMaxRateNextFree.
.1.3.6.1.2.1.97.1.8.6.1.2,DIFFSERV-MIB::diffServMaxRateLevel,Unsigned32,not-accessible,,current,,An index that indicates which level of a multi-rate shaper is being given its parameters. A multi-rate shaper has some number of rate levels. Frame Relay's dual rate specification refers to a 'committed' and an 'excess' rate; ATM's dual rate specification refers to a 'mean' and a 'peak' rate. This table is generalized to support an arbitrary number of rates. The committed or mean rate is level 1, the peak rate (if any) is the highest level rate configured, and if there are other rates they are distributed in monotonically increasing order between them.
.1.3.6.1.2.1.97.1.8.6.1.3,DIFFSERV-MIB::diffServMaxRateAbsolute,Unsigned32,read-create,,current,,The maximum rate in kilobits/sec that a downstream scheduler element should allocate to this queue. If the value is zero, then there is effectively no maximum rate limit and that the scheduler should attempt to be work conserving for this queue. If the value is non-zero, the scheduler will limit the servicing of this queue to, at most, this rate in a non-work-conserving manner. Note that this attribute value and that of diffServMaxRateRelative are coupled: changes to one will affect the value of the other. They are linked by the following equation, in that setting one will change the other: diffServMaxRateRelative = (diffServMaxRateAbsolute*1000000)/ifSpeed or, if appropriate: diffServMaxRateRelative = diffServMaxRateAbsolute/ifHighSpeed
.1.3.6.1.2.1.97.1.8.6.1.4,DIFFSERV-MIB::diffServMaxRateRelative,Unsigned32,read-create,,current,,The maximum rate that a downstream scheduler element should allocate to this queue, relative to the maximum rate of the interface as reported by ifSpeed or ifHighSpeed, in units of 1/1000 of 1. If the value is zero, then there is effectively no maximum rate limit and the scheduler should attempt to be work conserving for this queue. If the value is non-zero, the scheduler will limit the servicing of this queue to, at most, this rate in a non-work-conserving manner. Note that this attribute value and that of diffServMaxRateAbsolute are coupled: changes to one will affect the value of the other. They are linked by the following equation, in that setting one will change the other: diffServMaxRateRelative = (diffServMaxRateAbsolute*1000000)/ifSpeed or, if appropriate: diffServMaxRateRelative = diffServMaxRateAbsolute/ifHighSpeed
.1.3.6.1.2.1.97.1.8.6.1.5,DIFFSERV-MIB::diffServMaxRateThreshold,INTEGER,read-create,,current,,The number of bytes of queue depth at which the rate of a multi-rate scheduler will increase to the next output rate. In the last conceptual row for such a shaper, this threshold is ignored and by convention is zero.
.1.3.6.1.2.1.97.1.8.6.1.6,DIFFSERV-MIB::diffServMaxRateStorage,INTEGER,read-create,,current,other(1):volatile(2):nonVolatile(3):permanent(4):readOnly(5),The storage type for this conceptual row. Conceptual rows having the value 'permanent' need not allow write-access to any columnar objects in the row.
.1.3.6.1.2.1.97.1.8.6.1.7,DIFFSERV-MIB::diffServMaxRateStatus,INTEGER,read-create,,current,active(1):notInService(2):notReady(3):createAndGo(4):createAndWait(5):destroy(6),The status of this conceptual row. All writable objects in this row may be modified at any time. Setting this variable to 'destroy' when the MIB contains one or more RowPointers pointing to it results in destruction being delayed until the row is no longer used.
.1.3.6.1.2.1.97.2,DIFFSERV-MIB::diffServMIBConformance,,,,,,
.1.3.6.1.2.1.97.2.1,DIFFSERV-MIB::diffServMIBCompliances,,,,,,
.1.3.6.1.2.1.97.2.1.1,DIFFSERV-MIB::diffServMIBFullCompliance,,,,,,When this MIB is implemented with support for read-create, then such an implementation can claim full compliance. Such devices can then be both monitored and configured with this MIB.
.1.3.6.1.2.1.97.2.1.2,DIFFSERV-MIB::diffServMIBReadOnlyCompliance,,,,,,When this MIB is implemented without support for read-create (i.e. in read-only mode), then such an implementation can claim read-only compliance. Such a device can then be monitored but can not be configured with this MIB.
.1.3.6.1.2.1.97.2.2,DIFFSERV-MIB::diffServMIBGroups,,,,,,
.1.3.6.1.2.1.97.2.2.1,DIFFSERV-MIB::diffServMIBDataPathGroup,,,,,,The Data Path Group defines the MIB Objects that describe a functional data path.
.1.3.6.1.2.1.97.2.2.2,DIFFSERV-MIB::diffServMIBClfrGroup,,,,,,The Classifier Group defines the MIB Objects that describe the list the starts of individual classifiers.
.1.3.6.1.2.1.97.2.2.3,DIFFSERV-MIB::diffServMIBClfrElementGroup,,,,,,The Classifier Element Group defines the MIB Objects that describe the classifier elements that make up a generic classifier.
.1.3.6.1.2.1.97.2.2.4,DIFFSERV-MIB::diffServMIBMultiFieldClfrGroup,,,,,,The Multi-field Classifier Group defines the MIB Objects that describe a classifier element for matching on various fields of an IP and upper-layer protocol header.
.1.3.6.1.2.1.97.2.2.5,DIFFSERV-MIB::diffServMIBMeterGroup,,,,,,The Meter Group defines the objects used in describing a generic meter element.
.1.3.6.1.2.1.97.2.2.6,DIFFSERV-MIB::diffServMIBTBParamGroup,,,,,,The Token-Bucket Meter Group defines the objects used in describing a token bucket meter element.
.1.3.6.1.2.1.97.2.2.7,DIFFSERV-MIB::diffServMIBActionGroup,,,,,,The Action Group defines the objects used in describing a generic action element.
.1.3.6.1.2.1.97.2.2.8,DIFFSERV-MIB::diffServMIBDscpMarkActGroup,,,,,,The DSCP Mark Action Group defines the objects used in describing a DSCP Marking Action element.
.1.3.6.1.2.1.97.2.2.9,DIFFSERV-MIB::diffServMIBCounterGroup,,,,,,A collection of objects providing information specific to packet-oriented network interfaces.
.1.3.6.1.2.1.97.2.2.10,DIFFSERV-MIB::diffServMIBAlgDropGroup,,,,,,The Algorithmic Drop Group contains the objects that describe algorithmic dropper operation and configuration.
.1.3.6.1.2.1.97.2.2.11,DIFFSERV-MIB::diffServMIBRandomDropGroup,,,,,,The Random Drop Group augments the Algorithmic Drop Group for random dropper operation and configuration.
.1.3.6.1.2.1.97.2.2.12,DIFFSERV-MIB::diffServMIBQGroup,,,,,,The Queue Group contains the objects that describe an interface's queues.
.1.3.6.1.2.1.97.2.2.13,DIFFSERV-MIB::diffServMIBSchedulerGroup,,,,,,The Scheduler Group contains the objects that describe packet schedulers on interfaces.
.1.3.6.1.2.1.97.2.2.14,DIFFSERV-MIB::diffServMIBMinRateGroup,,,,,,The Minimum Rate Parameter Group contains the objects that describe packet schedulers' minimum rate or priority guarantees.
.1.3.6.1.2.1.97.2.2.15,DIFFSERV-MIB::diffServMIBMaxRateGroup,,,,,,The Maximum Rate Parameter Group contains the objects that describe packet schedulers' maximum rate guarantees.
.1.3.6.1.2.1.97.3,DIFFSERV-MIB::diffServMIBAdmin,,,,,,
.1.3.6.1.2.1.97.3.1,DIFFSERV-MIB::diffServTBMeters,,,,,,
.1.3.6.1.2.1.97.3.1.1,DIFFSERV-MIB::diffServTBParamSimpleTokenBucket,,,,,,Two Parameter Token Bucket Meter as described in the Informal Differentiated Services Model section 5.2.3.
.1.3.6.1.2.1.97.3.1.2,DIFFSERV-MIB::diffServTBParamAvgRate,,,,,,Average Rate Meter as described in the Informal Differentiated Services Model section 5.2.1.
.1.3.6.1.2.1.97.3.1.3,DIFFSERV-MIB::diffServTBParamSrTCMBlind,,,,,,Single Rate Three Color Marker Metering as defined by RFC 2697, in the `Color Blind' mode as described by the RFC.
.1.3.6.1.2.1.97.3.1.4,DIFFSERV-MIB::diffServTBParamSrTCMAware,,,,,,Single Rate Three Color Marker Metering as defined by RFC 2697, in the `Color Aware' mode as described by the RFC.
.1.3.6.1.2.1.97.3.1.5,DIFFSERV-MIB::diffServTBParamTrTCMBlind,,,,,,Two Rate Three Color Marker Metering as defined by RFC 2698, in the `Color Blind' mode as described by the RFC.
.1.3.6.1.2.1.97.3.1.6,DIFFSERV-MIB::diffServTBParamTrTCMAware,,,,,,Two Rate Three Color Marker Metering as defined by RFC 2698, in the `Color Aware' mode as described by the RFC.
.1.3.6.1.2.1.97.3.1.7,DIFFSERV-MIB::diffServTBParamTswTCM,,,,,,Time Sliding Window Three Color Marker Metering as defined by RFC 2859.
.1.3.6.1.2.1.97.3.2,DIFFSERV-MIB::diffServSchedulers,,,,,,
.1.3.6.1.2.1.97.3.2.1,DIFFSERV-MIB::diffServSchedulerPriority,,,,,,For use with diffServSchedulerMethod to indicate the Priority scheduling method. This is defined as an algorithm in which the presence of data in a queue or set of queues absolutely precludes dequeue from another queue or set of queues of lower priority. Note that attributes from diffServMinRateEntry of the queues/schedulers feeding this scheduler are used when determining the next packet to schedule.
.1.3.6.1.2.1.97.3.2.2,DIFFSERV-MIB::diffServSchedulerWRR,,,,,,For use with diffServSchedulerMethod to indicate the Weighted Round Robin scheduling method, defined as any algorithm in which a set of queues are visited in a fixed order, and varying amounts of traffic are removed from each queue in turn to implement an average output rate by class. Notice attributes from diffServMinRateEntry of the queues/schedulers feeding this scheduler are used when determining the next packet to schedule.
.1.3.6.1.2.1.97.3.2.3,DIFFSERV-MIB::diffServSchedulerWFQ,,,,,,For use with diffServSchedulerMethod to indicate the Weighted Fair Queuing scheduling method, defined as any algorithm in which a set of queues are conceptually visited in some order, to implement an average output rate by class. Notice attributes from diffServMinRateEntry of the queues/schedulers feeding this scheduler are used when determining the next packet to schedule.
.1.3.6.1.2.1.105,POWER-ETHERNET-MIB::powerEthernetMIB,,,,,,The MIB module for managing Power Source Equipment (PSE) working according to the IEEE 802.af Powered Ethernet (DTE Power via MDI) standard. The following terms are used throughout this MIB module. For complete formal definitions, the IEEE 802.3 standards should be consulted wherever possible: Group - A recommended, but optional, entity defined by the IEEE 802.3 management standard, in order to support a modular numbering scheme. The classical example allows an implementor to represent field-replaceable units as groups of ports, with the port numbering matching the modular hardware implementation. Port - This entity identifies the port within the group for which this entry contains information. The numbering scheme for ports is implementation specific. Copyright (c) The Internet Society (2003). This version of this MIB module is part of RFC 3621; See the RFC itself for full legal notices.
.1.3.6.1.2.1.105.0,POWER-ETHERNET-MIB::pethNotifications,,,,,,
.1.3.6.1.2.1.105.0.1,POWER-ETHERNET-MIB::pethPsePortOnOffNotification,,,,,, This Notification indicates if Pse Port is delivering or not power to the PD. This Notification SHOULD be sent on every status change except in the searching mode. At least 500 msec must elapse between notifications being emitted by the same object instance.
.1.3.6.1.2.1.105.0.2,POWER-ETHERNET-MIB::pethMainPowerUsageOnNotification,,,,,, This Notification indicate PSE Threshold usage indication is on, the usage power is above the threshold. At least 500 msec must elapse between notifications being emitted by the same object instance.
.1.3.6.1.2.1.105.0.3,POWER-ETHERNET-MIB::pethMainPowerUsageOffNotification,,,,,, This Notification indicates PSE Threshold usage indication off, the usage power is below the threshold. At least 500 msec must elapse between notifications being emitted by the same object instance.
.1.3.6.1.2.1.105.1,POWER-ETHERNET-MIB::pethObjects,,,,,,
.1.3.6.1.2.1.105.1.1,POWER-ETHERNET-MIB::pethPsePortTable,,not-accessible,,current,,A table of objects that display and control the power characteristics of power Ethernet ports on a Power Source Entity (PSE) device. This group will be implemented in managed power Ethernet switches and mid-span devices. Values of all read-write objects in this table are persistent at restart/reboot.
.1.3.6.1.2.1.105.1.1.1,POWER-ETHERNET-MIB::pethPsePortEntry,,not-accessible,pethPsePortGroupIndex:pethPsePortIndex,current,,A set of objects that display and control the power characteristics of a power Ethernet PSE port.
.1.3.6.1.2.1.105.1.1.1.1,POWER-ETHERNET-MIB::pethPsePortGroupIndex,Integer32,not-accessible,,current,,This variable uniquely identifies the group containing the port to which a power Ethernet PSE is connected. Group means box in the stack, module in a rack and the value 1 MUST be used for non-modular devices. Furthermore, the same value MUST be used in this variable, pethMainPseGroupIndex, and pethNotificationControlGroupIndex to refer to a given box in a stack or module in the rack.
.1.3.6.1.2.1.105.1.1.1.2,POWER-ETHERNET-MIB::pethPsePortIndex,Integer32,not-accessible,,current,,This variable uniquely identifies the power Ethernet PSE port within group pethPsePortGroupIndex to which the power Ethernet PSE entry is connected.
.1.3.6.1.2.1.105.1.1.1.3,POWER-ETHERNET-MIB::pethPsePortAdminEnable,INTEGER,read-write,,current,true(1):false(2),true (1) An interface which can provide the PSE functions. false(2) The interface will act as it would if it had no PSE function.
.1.3.6.1.2.1.105.1.1.1.4,POWER-ETHERNET-MIB::pethPsePortPowerPairsControlAbility,INTEGER,read-only,,current,true(1):false(2),Describes the capability of controlling the power pairs functionality to switch pins for sourcing power. The value true indicate that the device has the capability to control the power pairs. When false the PSE Pinout Alternative used cannot be controlled through the PethPsePortAdminEnable attribute.
.1.3.6.1.2.1.105.1.1.1.5,POWER-ETHERNET-MIB::pethPsePortPowerPairs,INTEGER,read-write,,current,signal(1):spare(2),Describes or controls the pairs in use. If the value of pethPsePortPowerPairsControl is true, this object is writable. A value of signal(1) means that the signal pairs only are in use. A value of spare(2) means that the spare pairs only are in use.
.1.3.6.1.2.1.105.1.1.1.6,POWER-ETHERNET-MIB::pethPsePortDetectionStatus,INTEGER,read-only,,current,disabled(1):searching(2):deliveringPower(3):fault(4):test(5):otherFault(6),Describes the operational status of the port PD detection. A value of disabled(1)- indicates that the PSE State diagram is in the state DISABLED. A value of deliveringPower(3) - indicates that the PSE State diagram is in the state POWER_ON for a duration greater than tlim max (see IEEE Std 802.3af Table 33-5 tlim). A value of fault(4) - indicates that the PSE State diagram is in the state TEST_ERROR. A value of test(5) - indicates that the PSE State diagram is in the state TEST_MODE. A value of otherFault(6) - indicates that the PSE State diagram is in the state IDLE due to the variable error_conditions. A value of searching(2)- indicates the PSE State diagram is in a state other than those listed above.
.1.3.6.1.2.1.105.1.1.1.7,POWER-ETHERNET-MIB::pethPsePortPowerPriority,INTEGER,read-write,,current,critical(1):high(2):low(3),This object controls the priority of the port from the point of view of a power management algorithm. The priority that is set by this variable could be used by a control mechanism that prevents over current situations by disconnecting first ports with lower power priority. Ports that connect devices critical to the operation of the network - like the E911 telephones ports - should be set to higher priority.
.1.3.6.1.2.1.105.1.1.1.8,POWER-ETHERNET-MIB::pethPsePortMPSAbsentCounter,Counter32,read-only,,current,,This counter is incremented when the PSE state diagram transitions directly from the state POWER_ON to the state IDLE due to tmpdo_timer_done being asserted.
.1.3.6.1.2.1.105.1.1.1.9,POWER-ETHERNET-MIB::pethPsePortType,OCTET,read-write,,current,,A manager will set the value of this variable to indicate the type of powered device that is connected to the port. The default value supplied by the agent if no value has ever been set should be a zero-length octet string.
.1.3.6.1.2.1.105.1.1.1.10,POWER-ETHERNET-MIB::pethPsePortPowerClassifications,INTEGER,read-only,,current,class0(1):class1(2):class2(3):class3(4):class4(5),Classification is a way to tag different terminals on the Power over LAN network according to their power consumption. Devices such as IP telephones, WLAN access points and others, will be classified according to their power requirements. The meaning of the classification labels is defined in the IEEE specification. This variable is valid only while a PD is being powered, that is, while the attribute pethPsePortDetectionStatus is reporting the enumeration deliveringPower.
.1.3.6.1.2.1.105.1.1.1.11,POWER-ETHERNET-MIB::pethPsePortInvalidSignatureCounter,Counter32,read-only,,current,,This counter is incremented when the PSE state diagram enters the state SIGNATURE_INVALID.
.1.3.6.1.2.1.105.1.1.1.12,POWER-ETHERNET-MIB::pethPsePortPowerDeniedCounter,Counter32,read-only,,current,,This counter is incremented when the PSE state diagram enters the state POWER_DENIED.
.1.3.6.1.2.1.105.1.1.1.13,POWER-ETHERNET-MIB::pethPsePortOverLoadCounter,Counter32,read-only,,current,,This counter is incremented when the PSE state diagram enters the state ERROR_DELAY_OVER.
.1.3.6.1.2.1.105.1.1.1.14,POWER-ETHERNET-MIB::pethPsePortShortCounter,Counter32,read-only,,current,,This counter is incremented when the PSE state diagram enters the state ERROR_DELAY_SHORT.
.1.3.6.1.2.1.105.1.3,POWER-ETHERNET-MIB::pethMainPseObjects,,,,,,
.1.3.6.1.2.1.105.1.3.1,POWER-ETHERNET-MIB::pethMainPseTable,,not-accessible,,current,,A table of objects that display and control attributes of the main power source in a PSE device. Ethernet switches are one example of boxes that would support these objects. Values of all read-write objects in this table are persistent at restart/reboot.
.1.3.6.1.2.1.105.1.3.1.1,POWER-ETHERNET-MIB::pethMainPseEntry,,not-accessible,pethMainPseGroupIndex,current,,A set of objects that display and control the Main power of a PSE. 
.1.3.6.1.2.1.105.1.3.1.1.1,POWER-ETHERNET-MIB::pethMainPseGroupIndex,Integer32,not-accessible,,current,,This variable uniquely identifies the group to which power Ethernet PSE is connected. Group means (box in the stack, module in a rack) and the value 1 MUST be used for non-modular devices. Furthermore, the same value MUST be used in this variable, pethPsePortGroupIndex, and pethNotificationControlGroupIndex to refer to a given box in a stack or module in a rack.
.1.3.6.1.2.1.105.1.3.1.1.2,POWER-ETHERNET-MIB::pethMainPsePower,Gauge32,read-only,,current,,The nominal power of the PSE expressed in Watts.
.1.3.6.1.2.1.105.1.3.1.1.3,POWER-ETHERNET-MIB::pethMainPseOperStatus,INTEGER,read-only,,current,on(1):off(2):faulty(3),The operational status of the main PSE.
.1.3.6.1.2.1.105.1.3.1.1.4,POWER-ETHERNET-MIB::pethMainPseConsumptionPower,Gauge32,read-only,,current,,Measured usage power expressed in Watts.
.1.3.6.1.2.1.105.1.3.1.1.5,POWER-ETHERNET-MIB::pethMainPseUsageThreshold,Integer32,read-write,,current,,The usage threshold expressed in percents for comparing the measured power and initiating an alarm if the threshold is exceeded.
.1.3.6.1.2.1.105.1.4,POWER-ETHERNET-MIB::pethNotificationControl,,,,,,
.1.3.6.1.2.1.105.1.4.1,POWER-ETHERNET-MIB::pethNotificationControlTable,,not-accessible,,current,,A table of objects that display and control the Notification on a PSE device. Values of all read-write objects in this table are persistent at restart/reboot.
.1.3.6.1.2.1.105.1.4.1.1,POWER-ETHERNET-MIB::pethNotificationControlEntry,,not-accessible,pethNotificationControlGroupIndex,current,,A set of objects that control the Notification events.
.1.3.6.1.2.1.105.1.4.1.1.1,POWER-ETHERNET-MIB::pethNotificationControlGroupIndex,Integer32,not-accessible,,current,,This variable uniquely identifies the group. Group means box in the stack, module in a rack and the value 1 MUST be used for non-modular devices. Furthermore, the same value MUST be used in this variable, pethPsePortGroupIndex, and pethMainPseGroupIndex to refer to a given box in a stack or module in a rack. 
.1.3.6.1.2.1.105.1.4.1.1.2,POWER-ETHERNET-MIB::pethNotificationControlEnable,INTEGER,read-write,,current,true(1):false(2),This object controls, on a per-group basis, whether or not notifications from the agent are enabled. The value true(1) means that notifications are enabled; the value false(2) means that they are not.
.1.3.6.1.2.1.105.2,POWER-ETHERNET-MIB::pethConformance,,,,,,
.1.3.6.1.2.1.105.2.1,POWER-ETHERNET-MIB::pethCompliances,,,,,,
.1.3.6.1.2.1.105.2.1.1,POWER-ETHERNET-MIB::pethCompliance,,,,,,Describes the requirements for conformance to the Power Ethernet MIB.
.1.3.6.1.2.1.105.2.2,POWER-ETHERNET-MIB::pethGroups,,,,,,
.1.3.6.1.2.1.105.2.2.1,POWER-ETHERNET-MIB::pethPsePortGroup,,,,,,PSE Port objects.
.1.3.6.1.2.1.105.2.2.2,POWER-ETHERNET-MIB::pethMainPseGroup,,,,,,Main PSE Objects. 
.1.3.6.1.2.1.105.2.2.3,POWER-ETHERNET-MIB::pethNotificationControlGroup,,,,,,Notification Control Objects. 
.1.3.6.1.2.1.105.2.2.4,POWER-ETHERNET-MIB::pethPsePortNotificationGroup,,,,,,Pse Port Notifications.
.1.3.6.1.2.1.105.2.2.5,POWER-ETHERNET-MIB::pethMainPowerNotificationGroup,,,,,,Main PSE Notifications.
.1.3.6.1.3,RFC1155-SMI::experimental,,,,,,
.1.3.6.1.4,RFC1155-SMI::private,,,,,,
.1.3.6.1.4.1,RFC1155-SMI::enterprises,,,,,,
.1.3.6.1.4.1.99,SNMP-RESEARCH-MIB::snmpResearch,,,,,,
.1.3.6.1.4.1.99.1,SNMP-RESEARCH-MIB::snmpResearchNode,,,,,,
.1.3.6.1.4.1.99.1.1,SNMP-RESEARCH-MIB::snmpResearchAgent,,,,,,
.1.3.6.1.4.1.99.1.1.1,SNMP-RESEARCH-MIB::snmpResearchUNIXAgent,,,,,,
.1.3.6.1.4.1.99.1.1.1.1,SNMP-RESEARCH-MIB::snmpResearchSnmpd,,,,,,
.1.3.6.1.4.1.99.1.1.2,SNMP-RESEARCH-MIB::snmpResearchProxyAgent,,,,,,
.1.3.6.1.4.1.99.1.1.2.1,SNMP-RESEARCH-MIB::snmpResearchLb100Proxy,,,,,,
.1.3.6.1.4.1.99.1.1.3,SNMP-RESEARCH-MIB::snmpResearchEMANATEMasterAgent,,,,,,
.1.3.6.1.4.1.99.1.1.3.1,SNMP-RESEARCH-MIB::solarisEMANATEMasterAgent,,,,,,
.1.3.6.1.4.1.99.1.1.3.2,SNMP-RESEARCH-MIB::solarisTCPEMANATEMasterAgent,,,,,,
.1.3.6.1.4.1.99.1.1.3.3,SNMP-RESEARCH-MIB::solarisx86TCPEMANATEMasterAgent,,,,,,
.1.3.6.1.4.1.99.1.1.3.4,SNMP-RESEARCH-MIB::sunosEMANATEMasterAgent,,,,,,
.1.3.6.1.4.1.99.1.1.3.5,SNMP-RESEARCH-MIB::dguxEMANATEMasterAgent,,,,,,
.1.3.6.1.4.1.99.1.1.3.6,SNMP-RESEARCH-MIB::hpuxEMANATEMasterAgent,,,,,,
.1.3.6.1.4.1.99.1.1.3.7,SNMP-RESEARCH-MIB::vxworksEMANATEMasterAgent,,,,,,
.1.3.6.1.4.1.99.1.1.3.8,SNMP-RESEARCH-MIB::hprtEMANATEMasterAgent,,,,,,
.1.3.6.1.4.1.99.1.1.3.9,SNMP-RESEARCH-MIB::aixEMANATEMasterAgent,,,,,,
.1.3.6.1.4.1.99.1.1.3.10,SNMP-RESEARCH-MIB::sco3EMANATEMasterAgent,,,,,,
.1.3.6.1.4.1.99.1.1.3.11,SNMP-RESEARCH-MIB::ntEMANATEMasterAgent,,,,,,
.1.3.6.1.4.1.99.1.1.3.12,SNMP-RESEARCH-MIB::win31EMANATEMasterAgent,,,,,,
.1.3.6.1.4.1.99.1.1.3.13,SNMP-RESEARCH-MIB::dynixEMANATEMasterAgent,,,,,,
.1.3.6.1.4.1.99.1.1.3.14,SNMP-RESEARCH-MIB::osf1EMANATEMasterAgent,,,,,,
.1.3.6.1.4.1.99.1.1.3.15,SNMP-RESEARCH-MIB::ncrEMANATEMasterAgent,,,,,,
.1.3.6.1.4.1.99.1.1.3.16,SNMP-RESEARCH-MIB::sco5EMANATEMasterAgent,,,,,,
.1.3.6.1.4.1.99.1.1.3.17,SNMP-RESEARCH-MIB::solarisx86EMANATEMasterAgent,,,,,,
.1.3.6.1.4.1.99.1.1.3.18,SNMP-RESEARCH-MIB::freebsdEMANATEMasterAgent,,,,,,
.1.3.6.1.4.1.99.1.1.3.19,SNMP-RESEARCH-MIB::irixEMANATEMasterAgent,,,,,,
.1.3.6.1.4.1.99.1.1.3.20,SNMP-RESEARCH-MIB::os2EMANATEMasterAgent,,,,,,
.1.3.6.1.4.1.99.1.1.3.21,SNMP-RESEARCH-MIB::unixwareEMANATEMasterAgent,,,,,,
.1.3.6.1.4.1.99.1.1.3.22,SNMP-RESEARCH-MIB::bsdiEMANATEMasterAgent,,,,,,
.1.3.6.1.4.1.99.1.1.3.23,SNMP-RESEARCH-MIB::sinixEMANATEMasterAgent,,,,,,
.1.3.6.1.4.1.99.1.1.3.24,SNMP-RESEARCH-MIB::ftxEMANATEMasterAgent,,,,,,
.1.3.6.1.4.1.99.1.1.3.25,SNMP-RESEARCH-MIB::hpux10EMANATEMasterAgent,,,,,,
.1.3.6.1.4.1.99.1.1.3.26,SNMP-RESEARCH-MIB::dguxx86EMANATEMasterAgent,,,,,,
.1.3.6.1.4.1.99.1.1.3.27,SNMP-RESEARCH-MIB::unixware21EMANATEMasterAgent,,,,,,
.1.3.6.1.4.1.99.1.1.3.28,SNMP-RESEARCH-MIB::linuxEMANATEMasterAgent,,,,,,
.1.3.6.1.4.1.99.1.1.3.29,SNMP-RESEARCH-MIB::osf4EMANATEMasterAgent,,,,,,
.1.3.6.1.4.1.99.1.1.3.30,SNMP-RESEARCH-MIB::hpux11EMANATEMasterAgent,,,,,,
.1.3.6.1.4.1.99.1.1.3.31,SNMP-RESEARCH-MIB::nextEMANATEMasterAgent,,,,,,
.1.3.6.1.4.1.99.1.1.3.32,SNMP-RESEARCH-MIB::netbsdEMANATEMasterAgent,,,,,,
.1.3.6.1.4.1.99.1.1.3.33,SNMP-RESEARCH-MIB::openvmsEMANATEMasterAgent,,,,,,
.1.3.6.1.4.1.99.1.1.3.34,SNMP-RESEARCH-MIB::sol64EMANATEMasterAgent,,,,,,
.1.3.6.1.4.1.99.1.1.3.35,SNMP-RESEARCH-MIB::sol64x86EMANATEMasterAgent,,,,,,
.1.3.6.1.4.1.99.1.1.3.36,SNMP-RESEARCH-MIB::hpux64EMANATEMasterAgent,,,,,,
.1.3.6.1.4.1.99.1.1.3.37,SNMP-RESEARCH-MIB::aix64EMANATEMasterAgent,,,,,,
.1.3.6.1.4.1.99.1.1.4,SNMP-RESEARCH-MIB::snmpResearchLTxxxAgent,,,,,,
.1.3.6.1.4.1.99.1.1.4.1,SNMP-RESEARCH-MIB::snmpResearchLT301Agent,,,,,,
.1.3.6.1.4.1.99.1.2,SNMP-RESEARCH-MIB::snmpResearchManager,,,,,,
.1.3.6.1.4.1.99.1.2.1,SNMP-RESEARCH-MIB::snmpSecurityPack,,,,,,
.1.3.6.1.4.1.99.1.2.1.1,SNMP-RESEARCH-MIB::snmpSecurityPackTgtOid,,,,,,
.1.3.6.1.4.1.99.2,SNMP-RESEARCH-MIB::snmpResearchVarVersion,,,,,,
.1.3.6.1.4.1.99.12,SNMP-RESEARCH-MIB::snmpResearchMIBs,,,,,,
.1.3.6.1.4.1.99.12.2,SNMP-RESEARCH-MIB::psMIB,,,,,,
.1.3.6.1.4.1.99.12.3,SNMP-RESEARCH-MIB::testMIB,,,,,,
.1.3.6.1.4.1.99.12.4,SNMP-RESEARCH-MIB::snmpResearchload,,,,,,
.1.3.6.1.4.1.99.12.5,SNMP-RESEARCH-MIB::oldExamples,,,,,,
.1.3.6.1.4.1.99.12.6,SNMP-RESEARCH-MIB::dmiTestMIB,,,,,,
.1.3.6.1.4.1.99.12.7,SNMP-RESEARCH-MIB::emacs2,,,,,,
.1.3.6.1.4.1.99.12.8,SNMP-RESEARCH-MIB::sample,,,,,,
.1.3.6.1.4.1.99.12.9,SNMP-RESEARCH-MIB::etc,,,,,,
.1.3.6.1.4.1.99.12.10,SNMP-RESEARCH-MIB::spakes,,,,,,
.1.3.6.1.4.1.99.12.12,SNMP-RESEARCH-MIB::demo,,,,,,
.1.3.6.1.4.1.99.12.13,SNMP-RESEARCH-MIB::newV2ip,,,,,,
.1.3.6.1.4.1.99.12.14,SNMP-RESEARCH-MIB::newV2udp,,,,,,
.1.3.6.1.4.1.99.12.17,SNMP-RESEARCH-MIB::instanceRep,,,,,,
.1.3.6.1.4.1.99.12.18,SNMP-RESEARCH-MIB::brassMIB,,,,,,
.1.3.6.1.4.1.99.12.19,SNMP-RESEARCH-MIB::srExamples,,,,,,
.1.3.6.1.4.1.99.12.19.1,SNMP-RESEARCH-MIB::srBasics,,,,,,
.1.3.6.1.4.1.99.12.19.2,SNMP-RESEARCH-MIB::srProductFeatures,,,,,,
.1.3.6.1.4.1.99.12.21,SNMP-RESEARCH-MIB::latin,,,,,,
.1.3.6.1.4.1.99.12.23,SNMP-RESEARCH-MIB::processControl,,,,,,
.1.3.6.1.4.1.99.12.25,SNMP-RESEARCH-MIB::ltHardware,,,,,,
.1.3.6.1.4.1.99.12.27,SNMP-RESEARCH-MIB::alias,,,,,,
.1.3.6.1.4.1.99.12.28,SNMP-RESEARCH-MIB::softTrap,,,,,,
.1.3.6.1.4.1.99.12.29,SNMP-RESEARCH-MIB::critApp,,,,,,
.1.3.6.1.4.1.99.12.30,SNMP-RESEARCH-MIB::htmlpage,,,,,,
.1.3.6.1.4.1.99.12.31,SNMP-RESEARCH-MIB::phoneSwitch,,,,,,
.1.3.6.1.4.1.99.12.32,SNMP-RESEARCH-MIB::httpToSnmpAuthMappingMIB,,,,,,
.1.3.6.1.4.1.99.12.33,SNMP-RESEARCH-MIB::srCommunityMIB,,,,,,
.1.3.6.1.4.1.99.12.34,SNMP-RESEARCH-MIB::srAgtTest,,,,,,
.1.3.6.1.4.1.99.12.35,SNMP-RESEARCH-MIB::usmTargetTagMIB,,,,,,
.1.3.6.1.4.1.99.12.36,SNMP-RESEARCH-MIB::tgtAddressMaskMIB,,,,,,
.1.3.6.1.4.1.99.12.38,SNMP-RESEARCH-MIB::siServiceMIB,,,,,,
.1.3.6.1.4.1.99.12.39,SNMP-RESEARCH-MIB::siFsMonitor,,,,,,
.1.3.6.1.4.1.99.12.40,SNMP-RESEARCH-MIB::siLog,,,,,,
.1.3.6.1.4.1.99.12.41,SNMP-RESEARCH-MIB::smExtensionMIB,,,,,,
.1.3.6.1.4.1.99.12.42,SNMP-RESEARCH-MIB::siCIAgentEval,,,,,,
.1.3.6.1.4.1.99.12.42.1,SNMP-RESEARCH-MIB::siCIAgentEvalExpiredMsg,,,,,,
.1.3.6.1.4.1.99.12.42.10,SNMP-RESEARCH-MIB::siCIAgentEvalExpiredTrap,,,,,,
.1.3.6.1.4.1.99.12.43,SNMP-RESEARCH-MIB::siKernelMIB,,,,,,
.1.3.6.1.4.1.99.12.44,SNMP-RESEARCH-MIB::srAutoDiscovery,,,,,,
.1.3.6.1.4.1.99.12.45,SNMP-RESEARCH-MIB::snmpSecurityPackMIB,,,,,,
.1.3.6.1.4.1.99.12.46,SNMP-RESEARCH-MIB::srAgentInfo,,,,,,
.1.3.6.1.4.1.99.12.46.1,SR-AGENT-INFO-MIB::srAgentInfoDescr,OCTET,read-only,,current,,Display String which displays information on the type
.1.3.6.1.4.1.99.12.46.2,SR-AGENT-INFO-MIB::srAgentInfoOSFlavor,OCTET,read-only,,current,,Display String which displays what operating system the
.1.3.6.1.4.1.99.12.46.10,SR-AGENT-INFO-MIB::srAgentInfoGroups,,,,,,
.1.3.6.1.4.1.99.12.46.10.1,SR-AGENT-INFO-MIB::srAgentInfoInitialGroup,,,,,,All objects in the initial srAgentInfo MIB module
.1.3.6.1.4.1.99.12.47,SNMP-RESEARCH-MIB::epicCLIMIB,,,,,,
.1.3.6.1.4.1.99.12.48,SNMP-RESEARCH-MIB::mgrHintsMIB,,,,,,
.1.3.6.1.4.1.99.12.49,SNMP-RESEARCH-MIB::srSpMIB,,,,,,
.1.3.6.1.4.1.99.12.50,SNMP-RESEARCH-MIB::brassAuxiliaryInfo,,,,,,
.1.3.6.1.4.1.99.12.51,SNMP-RESEARCH-MIB::componentUserMIB,,,,,,
.1.3.6.1.4.1.99.12.52,SNMP-RESEARCH-MIB::distBrassMIB,,,,,,
.1.3.6.1.4.1.99.12.53,SNMP-RESEARCH-MIB::queueEmulation,,,,,,
.1.3.6.1.4.1.99.12.54,SNMP-RESEARCH-MIB::srNativeAgentAdapter,,,,,,
.1.3.6.1.4.1.99.12.55,SNMP-RESEARCH-MIB::srProxyAgentOption,,,,,,
.1.3.6.1.4.1.99.13,SNMP-RESEARCH-MIB::srPrograms,,,,,,
.1.3.6.1.4.1.99.15,SNMP-RESEARCH-MIB::srExperimental,,,,,,
.1.3.6.1.4.1.99.15.1,SNMP-RESEARCH-MIB::srExperimentalMIBs,,,,,,
.1.3.6.1.4.1.99.15.1.1,SNMP-RESEARCH-MIB::httpSecurityMIB,,,,,,
.1.3.6.1.4.1.99.15.1.2,SNMP-RESEARCH-MIB::reconfigMIB,,,,,,
.1.3.6.1.4.1.99.15.1.2.1,SNMP-RESEARCH-MIB::reconfigAgent,,,,,,
.1.3.6.1.4.1.99.15.1.2.2,SNMP-RESEARCH-MIB::loadSubagent,,,,,,
.1.3.6.1.4.1.99.15.1.3,SNMP-RESEARCH-MIB::srSmExt,,,,,,
.1.3.6.1.4.1.99.15.1.5,SNMP-RESEARCH-MIB::eventMIB,,,,,,
.1.3.6.1.4.1.99.15.2,SNMP-RESEARCH-MIB::srExperimentalDomains,,,,,,
.1.3.6.1.4.1.99.15.2.1,SNMP-RESEARCH-MIB::httpTCPIPDomain,,,,,,
.1.3.6.1.4.1.99.15.2.2,SNMP-RESEARCH-MIB::snmpTCPDomain,,,,,,
.1.3.6.1.4.1.99.15.3,SNMP-RESEARCH-MIB::srExperimentalAPOErrorCodes,,,,,,
.1.3.6.1.4.1.99.15.4,SNMP-RESEARCH-MIB::srExperimentalAPOConsortium,,,,,,
.1.3.6.1.4.1.99.16,SNMP-RESEARCH-MIB::secureIntelligence,,,,,,
.1.3.6.1.4.1.99.16.1,SNMP-RESEARCH-MIB::enterpol,,,,,,
.1.3.6.1.4.1.99.16.1.1,SNMP-RESEARCH-MIB::enterpolEvents,,,,,,
.1.3.6.1.4.1.99.16.1.1.1,SNMP-RESEARCH-MIB::enterpolStatusEvents,,,,,,
.1.3.6.1.4.1.99.16.1.1.1.1,SNMP-RESEARCH-MIB::enterpolPingFailed,,,,,,
.1.3.6.1.4.1.99.16.1.1.1.2,SNMP-RESEARCH-MIB::enterpolPollFailed,,,,,,
.1.3.6.1.4.1.99.16.1.1.2,SNMP-RESEARCH-MIB::enterpolCdistribEvents,,,,,,
.1.3.6.1.4.1.99.16.1.1.3,SNMP-RESEARCH-MIB::enterpolRemoteEvents,,,,,,
.1.3.6.1.4.1.99.16.1.2,SNMP-RESEARCH-MIB::enterpolVarBinds,,,,,,
.1.3.6.1.4.1.99.16.1.2.1,SNMP-RESEARCH-MIB::enterpolMapName,,,,,,
.1.3.6.1.4.1.99.16.1.2.2,SNMP-RESEARCH-MIB::enterpolScript,,,,,,
.1.3.6.1.4.1.99.16.1.3,SNMP-RESEARCH-MIB::enterpolProcesses,,,,,,
.1.3.6.1.4.1.99.16.1.3.1,SNMP-RESEARCH-MIB::cdistrib,,,,,,
.1.3.6.1.4.1.99.16.1.3.2,SNMP-RESEARCH-MIB::pconfig,,,,,,
.1.3.6.1.4.1.99.16.1.4,SNMP-RESEARCH-MIB::enterpolSubsystems,,,,,,
.1.3.6.1.4.1.99.16.1.4.1,SNMP-RESEARCH-MIB::pmamm,,,,,,
.1.3.6.1.4.1.99.17,SNMP-RESEARCH-MIB::policyBasedManagement,,,,,,
.1.3.6.1.4.1.99.17.1,SNMP-RESEARCH-MIB::pbmScratchPad,,,,,,
.1.3.6.1.4.1.99.18,SNMP-RESEARCH-MIB::srAgentCapabilities,,,,,,
.1.3.6.1.4.1.99.42,SNMP-RESEARCH-MIB::mlmMIB,,,,,,
.1.3.6.1.4.1.4413,BROADCOM-REF-MIB::broadcom,,,,,,
.1.3.6.1.4.1.4413.1,BROADCOM-REF-MIB::broadcomProducts,,,,,,
.1.3.6.1.4.1.4413.1.1,BROADCOM-REF-MIB::fastPath,,,,,,
.1.3.6.1.4.1.4526,BROADCOM-REF-MIB::netgear,,,,,,
.1.3.6.1.4.1.4526.1,BROADCOM-REF-MIB::managedSwitch,,,,,,
.1.3.6.1.4.1.4526.1.1,BROADCOM-REF-MIB::fsm726s,,,,,,
.1.3.6.1.4.1.4526.1.1.1,FSM726S-MIB::netgearCommGroup,,,,,,
.1.3.6.1.4.1.4526.1.1.1.1,FSM726S-MIB::commTable,,not-accessible,,mandatory,,A list of SNMP Community Entries 
.1.3.6.1.4.1.4526.1.1.1.1.1,FSM726S-MIB::commEntry,,not-accessible,commIndex,mandatory,,A list of SNMP Community properties
.1.3.6.1.4.1.4526.1.1.1.1.1.1,FSM726S-MIB::commIndex,INTEGER,read-only,,mandatory,,An index that uniquely identifies an entry in the  Community Table. Eight entries are currently supported.
.1.3.6.1.4.1.4526.1.1.1.1.1.2,FSM726S-MIB::commName,OCTET,read-write,,mandatory,,The name of this SNMP Community Entry.
.1.3.6.1.4.1.4526.1.1.1.1.1.3,FSM726S-MIB::commGet,INTEGER,read-write,,mandatory,enabled(1):disabled(2),The GET permission for the community. A (1) indicates a GET enable. A (2) indicates a GET disable.
.1.3.6.1.4.1.4526.1.1.1.1.1.4,FSM726S-MIB::commSet,INTEGER,read-write,,mandatory,enabled(1):disabled(2),The SET permission for the community. A (1) indicates a SET enable. A (2) indicates a SET disable.
.1.3.6.1.4.1.4526.1.1.1.1.1.5,FSM726S-MIB::commTrap,INTEGER,read-write,,mandatory,enabled(1):disabled(2),The TRAP permission for the community. A (1) indicates a  TRAP enable. A (2) indicates a TRAP disable.
.1.3.6.1.4.1.4526.1.1.1.1.1.6,FSM726S-MIB::commStatus,INTEGER,read-write,,mandatory,,The RowStatus for the community entry.
.1.3.6.1.4.1.4526.1.1.2,FSM726S-MIB::netgearHostGroup,,,,,,
.1.3.6.1.4.1.4526.1.1.2.1,FSM726S-MIB::hostTable,,not-accessible,,mandatory,,A list of SNMP Trusted Host Entries 
.1.3.6.1.4.1.4526.1.1.2.1.1,FSM726S-MIB::hostEntry,,not-accessible,hostIndex,mandatory,,A list of SNMP Host properties
.1.3.6.1.4.1.4526.1.1.2.1.1.1,FSM726S-MIB::hostIndex,INTEGER,read-only,,mandatory,,An index that uniquely identifies an entry in the Host Table. Sixteen entries are currently supported.
.1.3.6.1.4.1.4526.1.1.2.1.1.2,FSM726S-MIB::hostName,OCTET,read-write,,mandatory,,The name of this Host Entry.
.1.3.6.1.4.1.4526.1.1.2.1.1.3,FSM726S-MIB::hostIP,IpAddress,read-write,,mandatory,,The IP Address for the host.
.1.3.6.1.4.1.4526.1.1.2.1.1.4,FSM726S-MIB::hostComm,OCTET,read-write,,mandatory,,The name of the community this host belongs to.
.1.3.6.1.4.1.4526.1.1.2.1.1.5,FSM726S-MIB::hostStatus,INTEGER,read-write,,mandatory,,The RowStatus for the community entry.
.1.3.6.1.4.1.4526.1.1.3,FSM726S-MIB::netgearMiscGroup,,,,,,
.1.3.6.1.4.1.4526.1.1.3.2,FSM726S-MIB::miscReset,INTEGER,read-write,,mandatory,reset(1):noop(2),Physically resets the unit - use with care. A (1) resets  the unit, a (2) does nothing.
.1.3.6.1.4.1.4526.1.1.3.3,FSM726S-MIB::miscStatisticsReset,INTEGER,read-write,,mandatory,reset(1):noop(2),Resets the units statistics. A (1) resets  the unit, a (2) does nothing.
.1.3.6.1.4.1.4526.1.1.4,FSM726S-MIB::netgearSpanGroup,,,,,,
.1.3.6.1.4.1.4526.1.1.4.1,FSM726S-MIB::spanOnOff,INTEGER,read-write,,mandatory,enabled(1):disabled(2),Enable/Disable Spanning Tree. A (1) enables, a (2) disables.
.1.3.6.1.4.1.4526.1.1.11,FSM726S-MIB::netgearConfigGroup,,,,,,
.1.3.6.1.4.1.4526.1.1.11.1,FSM726S-MIB::configVerSwPrimary,OCTET,read-only,,mandatory,,The software image version string
.1.3.6.1.4.1.4526.1.1.11.2,FSM726S-MIB::configVerHwChipSet,OCTET,read-only,,mandatory,,The hardware chipset version string
.1.3.6.1.4.1.4526.1.1.11.3,FSM726S-MIB::configBootMode,INTEGER,read-write,,mandatory,lastSaved(1):net(2):netAndSave(3),Defines the method used for downloading the image when reset.
.1.3.6.1.4.1.4526.1.1.11.4,FSM726S-MIB::configBootFtpServerIp,IpAddress,read-write,,mandatory,,The FTP server's IP address used for downloading the 
.1.3.6.1.4.1.4526.1.1.11.5,FSM726S-MIB::configBootImageFileName,OCTET,read-write,,mandatory,,The path and filename of the boot image to download
.1.3.6.1.4.1.4526.1.1.11.6,FSM726S-MIB::configPortTable,,not-accessible,,mandatory,,A list of interface entries used for enterprise specific configuration. The number of entries is given by the value of ifNumber. All interface entries are assumed to be Ethernet interafaces.
.1.3.6.1.4.1.4526.1.1.11.6.1,FSM726S-MIB::configPortEntry,,not-accessible,configPort,mandatory,,An enterprise specific interface entry.
.1.3.6.1.4.1.4526.1.1.11.6.1.1,FSM726S-MIB::configPort,INTEGER,read-write,,mandatory,,A unique value for each interface that correlates to ifIndex. Its value ranges between 1 and the value of ifNumber.
.1.3.6.1.4.1.4526.1.1.11.6.1.3,FSM726S-MIB::configPortDuplex,INTEGER,read-write,,mandatory,half-duplex(1):full-duplex(2),The port's duplex desired state.
.1.3.6.1.4.1.4526.1.1.11.6.1.6,FSM726S-MIB::configPortDataRate,INTEGER,read-write,,mandatory,rate10Meg(1):rate100Meg(2):rate1Gig(4),The port's desired transmission data rate.
.1.3.6.1.4.1.4526.1.1.11.6.1.8,FSM726S-MIB::configPortDuplexOper,INTEGER,read-only,,mandatory,half-duplex(1):full-duplex(2),The port's operating duplex state.
.1.3.6.1.4.1.4526.1.1.11.6.1.9,FSM726S-MIB::configPortDataRateOper,INTEGER,read-only,,mandatory,rate10Meg(1):rate100Meg(2):rate1Gig(4),The port's operating transmission data rate.
.1.3.6.1.4.1.4526.1.1.11.6.1.10,FSM726S-MIB::configPortStateOper,INTEGER,read-only,,mandatory,disabled(1):blocking(2):listening(3):learning(4):forwarding(5),The port's current state.
.1.3.6.1.4.1.4526.1.1.11.6.1.11,FSM726S-MIB::configPortFlowControl,INTEGER,read-write,,mandatory,enabled(1):disabled(2),The port will avoid transmitting a new packet for the period of time specified in a received PAUSE packet when enabled.
.1.3.6.1.4.1.4526.1.1.11.6.1.12,FSM726S-MIB::configPortDefaultVlanId,INTEGER,read-write,,mandatory,,The port will add this vlan id tag to any incoming packet which is lacking a vlan id tag.
.1.3.6.1.4.1.4526.1.1.11.6.1.13,FSM726S-MIB::configPortComments,OCTET,read-write,,mandatory,,May contain any comments related to a given port such as a user name or LAN segment.
.1.3.6.1.4.1.4526.1.1.11.6.1.14,FSM726S-MIB::configPortAutoNegotiation,INTEGER,read-write,,mandatory,enabled(1):disabled(2),The port will perform auto-negotiation to determine the port's duplex and data rate. When auto-negotiation is enabled, the negotiated duplex and data rate can be  determined by configPortDuplexOper and  configPortDataRateOper mib objects respectively.
.1.3.6.1.4.1.4526.1.1.11.6.1.16,FSM726S-MIB::configPortFlowControlOper,INTEGER,read-only,,mandatory,enabled(1):disabled(2),The port's operating flow control state.
.1.3.6.1.4.1.4526.1.1.11.6.1.17,FSM726S-MIB::configPortGBIC,INTEGER,read-write,,mandatory,fastEthernet(1):mii(2):fx(3):gigabitEthernetSX(4):gigabitEthernetLX(5):gigabitEthernetGBIC(6):gigabitEthernetTP(7),Port Type.
.1.3.6.1.4.1.4526.1.1.11.6.1.18,FSM726S-MIB::configPortFastLink,INTEGER,read-write,,mandatory,disabled(1):enabled(2),The port's FastLink option.
.1.3.6.1.4.1.4526.1.1.11.6.1.19,FSM726S-MIB::configPortPriority,INTEGER,read-write,,mandatory,normal(1):high(2),The port's current flow control state.
.1.3.6.1.4.1.4526.1.1.11.6.1.20,FSM726S-MIB::configPortBroadcastControl,INTEGER,read-write,,mandatory,,The port's broadcast packets per second threshold. 
.1.3.6.1.4.1.4526.1.1.11.8,FSM726S-MIB::configMirroringOnOff,INTEGER,read-write,,mandatory,enabled(1):disabled(2),Enable or disable port mirroring.
.1.3.6.1.4.1.4526.1.1.11.9,FSM726S-MIB::configMirrorSrc,INTEGER,read-write,,mandatory,,When mirroring is enabled (configMirroringOnOff = enabled), this identifies the mirroring source port. This value has a valid range of 1 to ifNumber when enbaled.
.1.3.6.1.4.1.4526.1.1.11.10,FSM726S-MIB::configMirrorMon,INTEGER,read-write,,mandatory,,When mirroring is enabled (configMirroringOnOff = enabled), this identifies the mirroring monitoring port. This value has a valid range of 1 to ifNumber when enabled.
.1.3.6.1.4.1.4526.1.1.11.12,FSM726S-MIB::configIpAssignmentMode,INTEGER,read-write,,mandatory,manual(1):bootP(2):dhcp(3),Indicates whether the device address is assigned by
.1.3.6.1.4.1.4526.1.1.11.13,FSM726S-MIB::configPhysAddress,OCTET,read-only,,mandatory,,The interface's address at the protocol layer immediately 'below' the network layer in the protocol stack. This is the physical address for the end-station.
.1.3.6.1.4.1.4526.1.1.11.15,FSM726S-MIB::configPasswordAdmin,OCTET,write-only,,mandatory,,The adminstrator password
.1.3.6.1.4.1.4526.1.1.11.16,FSM726S-MIB::configIpAddress,IpAddress,read-write,,mandatory,,The IP Address for the RDU box.
.1.3.6.1.4.1.4526.1.1.11.17,FSM726S-MIB::configNetMask,IpAddress,read-write,,mandatory,,The network mask for the RDU box.
.1.3.6.1.4.1.4526.1.1.11.18,FSM726S-MIB::configGateway,IpAddress,read-write,,mandatory,,The Gatway Address for the unit.
.1.3.6.1.4.1.4526.1.1.11.19,FSM726S-MIB::configSave,INTEGER,read-write,,mandatory,save(1):noop(2),Physically saves the current configuration to nvram. - use with care.  (1) saves the configuration (2) does nothing.
.1.3.6.1.4.1.4526.1.1.11.21,FSM726S-MIB::configVerBootRomImage,OCTET,read-only,,mandatory,,The Boot ROM version string
.1.3.6.1.4.1.4526.1.1.11.22,FSM726S-MIB::configRestoreDefaults,INTEGER,read-write,,mandatory,restore(1):noop(2),Restores the configuration of the unit to the original settings.
.1.3.6.1.4.1.4526.1.1.11.23,FSM726S-MIB::configIGMPOnOff,INTEGER,read-write,,mandatory,enabled(1):disabled(2),Enable or disable the IGMP protocol within the switch.
.1.3.6.1.4.1.4526.1.1.11.24,FSM726S-MIB::configWebOnOff,INTEGER,read-write,,mandatory,enabled(1):disabled(2),Enable or disable the Web Interface.
.1.3.6.1.4.1.4526.1.1.11.25,FSM726S-MIB::configHighPriorityOptimization,INTEGER,read-write,,mandatory,enabled(1):disabled(2),Enable or disable high priority optimization.
.1.3.6.1.4.1.4526.1.1.11.27,FSM726S-MIB::configUserAuthenticationMode,INTEGER,read-write,,mandatory,basicPasswordOnly(1):basicPasswordThenRemoteRADIUS(2):remoteRADIUSOnly(4),Determines whether the user password will be authenticated
.1.3.6.1.4.1.4526.1.1.11.28,FSM726S-MIB::configRadiusServerIpAddress,IpAddress,read-write,,mandatory,,The IP Address of the RADIUS server used for remote
.1.3.6.1.4.1.4526.1.1.11.29,FSM726S-MIB::configRadiusSharedSecret,OCTET,read-write,,mandatory,,A string of characters used in the RADIUS password 
.1.3.6.1.4.1.4526.1.1.11.30,FSM726S-MIB::configTelnetConsole,INTEGER,read-write,,mandatory,enabled(1):disabled(2),Enable or disable the telnet console.
.1.3.6.1.4.1.4526.1.1.11.31,FSM726S-MIB::configDiffServTable,,not-accessible,,mandatory,,A list of DSCP Priorities.
.1.3.6.1.4.1.4526.1.1.11.31.1,FSM726S-MIB::configDiffServEntry,,not-accessible,configDiffServDSCP,mandatory,,An enterprise specific DSCP entry.
.1.3.6.1.4.1.4526.1.1.11.31.1.1,FSM726S-MIB::configDiffServDSCP,INTEGER,read-only,,mandatory,,A DSCP value (0 - 63).
.1.3.6.1.4.1.4526.1.1.11.31.1.2,FSM726S-MIB::configDiffServPriority,INTEGER,read-write,,mandatory,normal(1):high(2),The DSCP's current priority setting.
.1.3.6.1.4.1.4526.1.1.11.32,FSM726S-MIB::configTftpServerIpAddress,IpAddress,read-write,,mandatory,,The IP Address of the tftp server used to upload and
.1.3.6.1.4.1.4526.1.1.11.33,FSM726S-MIB::configTftpServerFileName,OCTET,read-write,,mandatory,,The filename, including the path, used to store or 
.1.3.6.1.4.1.4526.1.1.11.34,FSM726S-MIB::configTftpOperation,INTEGER,read-write,,mandatory,download(1):upload(2),The tftp operation to perform. Either download a 
.1.3.6.1.4.1.4526.1.1.11.35,FSM726S-MIB::configIpFilter,INTEGER,read-write,,mandatory,enabled(1):disabled(2),Determines if access to the device is limited to only
.1.3.6.1.4.1.4526.1.1.11.36,FSM726S-MIB::configIpFilterTable,,not-accessible,,mandatory,,A list of IP addresses allowed access to this device.
.1.3.6.1.4.1.4526.1.1.11.36.1,FSM726S-MIB::configIpFilterEntry,,not-accessible,configIpFilterIpAddress,mandatory,,An enterprise specific IP filter entry.
.1.3.6.1.4.1.4526.1.1.11.36.1.1,FSM726S-MIB::configIpFilterIpAddress,IpAddress,read-only,,mandatory,,An IP address which is allowed access to this device.
.1.3.6.1.4.1.4526.1.1.11.36.1.2,FSM726S-MIB::configIpFilterStatus,INTEGER,read-write,,mandatory,active(1):destroy(6),The status of an entry in the IP filter Table. Only are available.
.1.3.6.1.4.1.4526.1.1.11.37,FSM726S-MIB::configUserName,OCTET,read-write,,mandatory,,The users login Id.
.1.3.6.1.4.1.4526.1.1.11.38,FSM726S-MIB::configPasswordProtection,INTEGER,read-write,,mandatory,enabled(1):disabled(2),Determines if a user must login before gaining access
.1.3.6.1.4.1.4526.1.1.11.39,FSM726S-MIB::configPasswordEncryption,INTEGER,read-write,,mandatory,clearText(1):encrypted(2),Determines when the password is written to the 
.1.3.6.1.4.1.4526.1.1.11.40,FSM726S-MIB::configAuthServerIpAddress,IpAddress,read-write,,mandatory,,The IP Address of the server used for 802.1x
.1.3.6.1.4.1.4526.1.1.11.41,FSM726S-MIB::configAuthServerSharedSecret,OCTET,read-write,,mandatory,,A string of characters used in the RADIUS password 
.1.3.6.1.4.1.4526.1.1.13,FSM726S-MIB::netgearVlanGroup,,,,,,
.1.3.6.1.4.1.4526.1.1.13.1,FSM726S-MIB::vlanTable,,not-accessible,,mandatory,,A list of the VLANs
.1.3.6.1.4.1.4526.1.1.13.1.1,FSM726S-MIB::vlanEntry,,not-accessible,vlanId,mandatory,,A VLAN entry containing the VLAN id and name.
.1.3.6.1.4.1.4526.1.1.13.1.1.1,FSM726S-MIB::vlanId,INTEGER,read-only,,mandatory,,The VLAN identifier. A maximum of 64 VLANs is supported. The value must be from 1 to 4094.
.1.3.6.1.4.1.4526.1.1.13.1.1.2,FSM726S-MIB::vlanName,OCTET,read-write,,mandatory,,The VLAN name associated with the VLAN Id.
.1.3.6.1.4.1.4526.1.1.13.1.1.3,FSM726S-MIB::vlanStatus,INTEGER,read-write,,mandatory,active(1):createAndGo(4):destroy(6),The status of an entry in the VLAN Table. Only a subset of the rowstatus variables (active, createAndGo, destroy)  are available.
.1.3.6.1.4.1.4526.1.1.13.2,FSM726S-MIB::vlanPortTable,,not-accessible,,mandatory,,A list of ports and their associated VLAN.
.1.3.6.1.4.1.4526.1.1.13.2.1,FSM726S-MIB::vlanPortEntry,,not-accessible,vlanPortPortId:vlanPortVlanId,mandatory,,Information pertaining to an individual port regarding to which VLAN it belongs.
.1.3.6.1.4.1.4526.1.1.13.2.1.1,FSM726S-MIB::vlanPortPortId,INTEGER,read-only,,mandatory,,A port identifier that is in the range of 1 to ifNumber.
.1.3.6.1.4.1.4526.1.1.13.2.1.2,FSM726S-MIB::vlanPortVlanId,INTEGER,read-only,,mandatory,,The VLAN identifier.
.1.3.6.1.4.1.4526.1.1.13.2.1.3,FSM726S-MIB::vlanPortStatus,INTEGER,read-write,,mandatory,active(1):createAndGo(4):destroy(6),The status of this port's association within this VLAN. Only  a subset of the rowstatus variables (active, createAndGo, destroy) are available.
.1.3.6.1.4.1.4526.1.1.13.2.1.4,FSM726S-MIB::vlanPortTaggedMode,INTEGER,read-write,,mandatory,untagged(1):tagged(2),The tagged mode of a VLAN port.
.1.3.6.1.4.1.4526.1.1.14,FSM726S-MIB::netgearPortTrunkGroup,,,,,,
.1.3.6.1.4.1.4526.1.1.14.1,FSM726S-MIB::portTrunkTable,,not-accessible,,mandatory,,A list of port trunks and their associated members.
.1.3.6.1.4.1.4526.1.1.14.1.1,FSM726S-MIB::portTrunkEntry,,not-accessible,portTrunkId:portTrunkMember,mandatory,,A port trunk entry containing the trunk id and trunk members.
.1.3.6.1.4.1.4526.1.1.14.1.1.1,FSM726S-MIB::portTrunkId,INTEGER,read-only,,mandatory,,The port trunk identifier. The current range is from 1 to 4.
.1.3.6.1.4.1.4526.1.1.14.1.1.2,FSM726S-MIB::portTrunkMember,INTEGER,read-only,,mandatory,,A port trunk has four members.
.1.3.6.1.4.1.4526.1.1.14.1.1.3,FSM726S-MIB::portTrunkMemberValue,INTEGER,read-write,,mandatory,,A port trunk member value indicates which port is a member of the specified trunk. Valid values are in the range from 0 to ifNumber. A zero indicates that no port is contained in the specifed member.
.1.3.6.1.4.1.4526.1.2,BROADCOM-REF-MIB::fsm750s,,,,,,
.1.3.6.1.4.1.4526.1.3,BROADCOM-REF-MIB::gsm712,,,,,,
.1.3.6.1.4.1.4526.1.4,BROADCOM-REF-MIB::fsm726,,,,,,
.1.3.6.1.4.1.4526.1.5,BROADCOM-REF-MIB::gsm712f,,,,,,
.1.3.6.1.4.1.4526.1.6,BROADCOM-REF-MIB::gsm7312,,,,,,
.1.3.6.1.4.1.4526.1.6.1,GSM7312-SWITCHING-MIB::gsm7312Switching,,,,,,
.1.3.6.1.4.1.4526.1.6.1.1,GSM7312-SWITCHING-MIB::agentInfoGroup,,,,,,
.1.3.6.1.4.1.4526.1.6.1.1.1,GSM7312-SWITCHING-MIB::agentInventoryGroup,,,,,,
.1.3.6.1.4.1.4526.1.6.1.1.1.1,GSM7312-SWITCHING-MIB::agentInventorySysDescription,OCTET,read-only,,current,,The switch's Inventory system description. 
.1.3.6.1.4.1.4526.1.6.1.1.1.2,GSM7312-SWITCHING-MIB::agentInventoryMachineType,OCTET,read-only,,current,,Type of the Machine used in the Switch 
.1.3.6.1.4.1.4526.1.6.1.1.1.3,GSM7312-SWITCHING-MIB::agentInventoryBurnedInMacAddress,OCTET,read-only,,current,,Burned-In MAC Address
.1.3.6.1.4.1.4526.1.6.1.1.1.4,GSM7312-SWITCHING-MIB::agentInventoryAdditionalPackages,OCTET,read-only,,current,,Lists additional functional packages available on this unit.
.1.3.6.1.4.1.4526.1.6.1.1.1.5,GSM7312-SWITCHING-MIB::agentInventorySoftwareVersion,OCTET,read-only,,current,,Lists the version of software loaded on this unit.
.1.3.6.1.4.1.4526.1.6.1.1.2,GSM7312-SWITCHING-MIB::agentTrapLogGroup,,,,,,
.1.3.6.1.4.1.4526.1.6.1.1.2.1,GSM7312-SWITCHING-MIB::agentTrapLogTotal,Integer32,read-only,,current,,The total number of traps sent since last reset.
.1.3.6.1.4.1.4526.1.6.1.1.2.3,GSM7312-SWITCHING-MIB::agentTrapLogTotalSinceLastViewed,Integer32,read-only,,deprecated,,The number of traps sent since last viewed.
.1.3.6.1.4.1.4526.1.6.1.1.2.4,GSM7312-SWITCHING-MIB::agentTrapLogTable,,not-accessible,,current,,Agent Trap Log
.1.3.6.1.4.1.4526.1.6.1.1.2.4.1,GSM7312-SWITCHING-MIB::agentTrapLogEntry,,not-accessible,agentTrapLogIndex,current,,Agent trap log entry
.1.3.6.1.4.1.4526.1.6.1.1.2.4.1.1,GSM7312-SWITCHING-MIB::agentTrapLogIndex,Integer32,read-only,,current,,Unique index of trap entry
.1.3.6.1.4.1.4526.1.6.1.1.2.4.1.2,GSM7312-SWITCHING-MIB::agentTrapLogSystemTime,OCTET,read-only,,current,,System uptime when trap was sent.  This entry shows how long the system has been up when the trap occurred.
.1.3.6.1.4.1.4526.1.6.1.1.2.4.1.3,GSM7312-SWITCHING-MIB::agentTrapLogTrap,OCTET,read-only,,current,,Description of the trap sent.
.1.3.6.1.4.1.4526.1.6.1.1.3,GSM7312-SWITCHING-MIB::agentSupportedMibTable,,not-accessible,,current,,Supported MIB table
.1.3.6.1.4.1.4526.1.6.1.1.3.1,GSM7312-SWITCHING-MIB::agentSupportedMibEntry,,not-accessible,agentSupportedMibIndex,current,,Supported MIB entry
.1.3.6.1.4.1.4526.1.6.1.1.3.1.1,GSM7312-SWITCHING-MIB::agentSupportedMibIndex,Integer32,read-only,,current,,Unique index of the Supported MIB entry
.1.3.6.1.4.1.4526.1.6.1.1.3.1.2,GSM7312-SWITCHING-MIB::agentSupportedMibName,OCTET,read-only,,current,,The name of the MIB (RFC or IEEE) that is supported.
.1.3.6.1.4.1.4526.1.6.1.1.3.1.3,GSM7312-SWITCHING-MIB::agentSupportedMibDescription,OCTET,read-only,,current,,Description of the MIB (RFC or IEEE) that is supported.
.1.3.6.1.4.1.4526.1.6.1.2,GSM7312-SWITCHING-MIB::agentConfigGroup,,,,,,
.1.3.6.1.4.1.4526.1.6.1.2.1,GSM7312-SWITCHING-MIB::agentCLIConfigGroup,,,,,,
.1.3.6.1.4.1.4526.1.6.1.2.1.1,GSM7312-SWITCHING-MIB::agentLoginSessionTable,,not-accessible,,current,,A table of the switch's login session
.1.3.6.1.4.1.4526.1.6.1.2.1.1.1,GSM7312-SWITCHING-MIB::agentLoginSessionEntry,,not-accessible,agentLoginSessionIndex,current,,Login Session Entry
.1.3.6.1.4.1.4526.1.6.1.2.1.1.1.1,GSM7312-SWITCHING-MIB::agentLoginSessionIndex,Integer32,read-only,,current,,Agent Login Session Index of the switch
.1.3.6.1.4.1.4526.1.6.1.2.1.1.1.2,GSM7312-SWITCHING-MIB::agentLoginSessionUserName,OCTET,read-only,,current,,Agent Login Session UserName of the switch
.1.3.6.1.4.1.4526.1.6.1.2.1.1.1.3,GSM7312-SWITCHING-MIB::agentLoginSessionIPAddress,IpAddress,read-only,,current,,Agent Login Session IP Address of the switch
.1.3.6.1.4.1.4526.1.6.1.2.1.1.1.4,GSM7312-SWITCHING-MIB::agentLoginSessionConnectionType,INTEGER,read-only,,current,serial(1):telnet(2),Agent Login Session Connection Type of the switch
.1.3.6.1.4.1.4526.1.6.1.2.1.1.1.5,GSM7312-SWITCHING-MIB::agentLoginSessionIdleTime,TimeTicks,read-only,,current,,Agent Login Session Idle Time of the switch
.1.3.6.1.4.1.4526.1.6.1.2.1.1.1.6,GSM7312-SWITCHING-MIB::agentLoginSessionSessionTime,TimeTicks,read-only,,current,,Agent Login Session Time of the switch
.1.3.6.1.4.1.4526.1.6.1.2.1.1.1.7,GSM7312-SWITCHING-MIB::agentLoginSessionStatus,INTEGER,read-write,,current,active(1):notInService(2):notReady(3):createAndGo(4):createAndWait(5):destroy(6),Status of the user. active(1) - This connection is active. destroy(6) - Set to this value to disconnect this user.
.1.3.6.1.4.1.4526.1.6.1.2.1.2,GSM7312-SWITCHING-MIB::agentTelnetConfigGroup,,,,,,
.1.3.6.1.4.1.4526.1.6.1.2.1.2.1,GSM7312-SWITCHING-MIB::agentTelnetLoginTimeout,Integer32,read-write,,current,,Telnet login timeout (minutes)  Config telnet timeout will set the telnet session timeout value.  A session is active as long as the session has not remained idle for  the value set. Specify a value from 0 to 160.  A value of 0 indicates that a Telnet session remains active indefinitely.  Note: Changing the timeout value for active  sessions does not become effective until the session is reaccessed.  Any keystroke will also activate the new timeout duration.
.1.3.6.1.4.1.4526.1.6.1.2.1.2.2,GSM7312-SWITCHING-MIB::agentTelnetMaxSessions,Integer32,read-write,,current,,Maximum number of Telnet Sessions Config telnet maxsessions is an integer value from 0 to 5 that specifies the maximum number of telnet sessions that can be established.  If the value is 0, no Telnet session can be established.  
.1.3.6.1.4.1.4526.1.6.1.2.1.2.3,GSM7312-SWITCHING-MIB::agentTelnetAllowNewMode,INTEGER,read-write,,current,enable(1):disable(2),Allow new telnet sessions (enable or disable) Config telnet disable means that no new Telnet sessions are to be  established. Any already established session remains active until  the session is ended or an abnormal network error ends it.  
.1.3.6.1.4.1.4526.1.6.1.2.1.3,GSM7312-SWITCHING-MIB::agentUserConfigGroup,,,,,,
.1.3.6.1.4.1.4526.1.6.1.2.1.3.1,GSM7312-SWITCHING-MIB::agentUserConfigCreate,OCTET,read-write,,current,,Create a new user. When set with a non-empty string, a new user with that name will be created. This object will only return an empty string. This string is limited to alpha-numeric strings (uncluding the '-' and '_' characters).
.1.3.6.1.4.1.4526.1.6.1.2.1.3.2,GSM7312-SWITCHING-MIB::agentUserConfigTable,,not-accessible,,current,,User Config Table
.1.3.6.1.4.1.4526.1.6.1.2.1.3.2.1,GSM7312-SWITCHING-MIB::agentUserConfigEntry,,not-accessible,agentUserIndex,current,,User Config Entry
.1.3.6.1.4.1.4526.1.6.1.2.1.3.2.1.1,GSM7312-SWITCHING-MIB::agentUserIndex,Integer32,not-accessible,,current,,Agent User Config Index
.1.3.6.1.4.1.4526.1.6.1.2.1.3.2.1.2,GSM7312-SWITCHING-MIB::agentUserName,OCTET,read-write,,current,,Agent User Name. This string is limited to alpha-numeric strings (including the '-' and '_' characters).
.1.3.6.1.4.1.4526.1.6.1.2.1.3.2.1.3,GSM7312-SWITCHING-MIB::agentUserPassword,OCTET,read-write,,current,,Agent User Password This object will return an empty string even if a password is set.
.1.3.6.1.4.1.4526.1.6.1.2.1.3.2.1.4,GSM7312-SWITCHING-MIB::agentUserAccessMode,INTEGER,read-only,,current,read(1):write(2),Agent User Access Mode
.1.3.6.1.4.1.4526.1.6.1.2.1.3.2.1.5,GSM7312-SWITCHING-MIB::agentUserStatus,INTEGER,read-write,,current,active(1):notInService(2):notReady(3):createAndGo(4):createAndWait(5):destroy(6),Agent User Status. active(1) - This user account is active. destroy(6) - Set to this value to remove this user account.
.1.3.6.1.4.1.4526.1.6.1.2.1.3.2.1.6,GSM7312-SWITCHING-MIB::agentUserAuthenticationType,INTEGER,read-write,,current,none(1):hmacmd5(2):hmacsha(3),SNMPv3 User Authentication. The user passsword must be set to a string greater than or equal to 8 characters for this to be set to anything but none(1).  none(1) - no authentication used hmacmd5(1) - Use HMAC-MD5 authentication hmacsha(1) - Use HMAC-SHA authentication
.1.3.6.1.4.1.4526.1.6.1.2.1.3.2.1.7,GSM7312-SWITCHING-MIB::agentUserEncryptionType,INTEGER,read-write,,current,none(1):des(2),SNMPv3 User Encryption Can not be set to des(2) if agentUserAuthenticationType is set to none(1).  none(1) - no encryption used des(2) - DES encryption used
.1.3.6.1.4.1.4526.1.6.1.2.1.3.2.1.8,GSM7312-SWITCHING-MIB::agentUserEncryptionPassword,OCTET,read-write,,current,,SNMPv3 User Encryption Password This object will return an empty string even if a password is  set. agentUserEncryptionType must be set to des(2) before this object can be configured. This object will return an empty string even if a password is set.
.1.3.6.1.4.1.4526.1.6.1.2.1.5,GSM7312-SWITCHING-MIB::agentSerialGroup,,,,,,
.1.3.6.1.4.1.4526.1.6.1.2.1.5.1,GSM7312-SWITCHING-MIB::agentSerialTimeout,Integer32,read-write,,current,,agentSerialTimeout specifies the maximum connect time(in minutes)  without console activity. A value of 0 indicates that a console can  be connected indefinitely. The time range is 0 to 160. 
.1.3.6.1.4.1.4526.1.6.1.2.1.5.2,GSM7312-SWITCHING-MIB::agentSerialBaudrate,INTEGER,read-write,,current,baud-1200(1):baud-2400(2):baud-4800(3):baud-9600(4):baud-19200(5):baud-38400(6):baud-57600(7):baud-115200(8), agentSerialBaudrate specifies the current baud rate at which  the serial port will try to connect. The available values  are 1200, 2400, 4800, 9600, 19200, 38400,57600, and 115200 baud. 
.1.3.6.1.4.1.4526.1.6.1.2.1.5.3,GSM7312-SWITCHING-MIB::agentSerialCharacterSize,Integer32,read-only,,current,,agentSerialCharacterSize specifies the number of bits in  a character. The number of bits is always 8.
.1.3.6.1.4.1.4526.1.6.1.2.1.5.4,GSM7312-SWITCHING-MIB::agentSerialHWFlowControlMode,INTEGER,read-only,,current,enable(1):disable(2),agentSerialHardwareFlowControl specifies whether hardware  flow-control is enabled or disabled. Hardware Flow Control is  always disabled.
.1.3.6.1.4.1.4526.1.6.1.2.1.5.5,GSM7312-SWITCHING-MIB::agentSerialStopBits,Integer32,read-only,,current,, agentSerialStopBits specifies the number of Stop bits per  character. The number of Stop bits is always 1.
.1.3.6.1.4.1.4526.1.6.1.2.1.5.6,GSM7312-SWITCHING-MIB::agentSerialParityType,INTEGER,read-only,,current,even(1):odd(2):none(3), agentSerialParityType specifies the Parity Method used on  the Serial Port. The Parity Method is always None. 
.1.3.6.1.4.1.4526.1.6.1.2.2,GSM7312-SWITCHING-MIB::agentLagConfigGroup,,,,,,
.1.3.6.1.4.1.4526.1.6.1.2.2.1,GSM7312-SWITCHING-MIB::agentLagConfigCreate,OCTET,read-write,,current,,Agent LAG Create. When this object is set with a non-empty string, a new LAG will be created  if possible with the entered string as its name.
.1.3.6.1.4.1.4526.1.6.1.2.2.2,GSM7312-SWITCHING-MIB::agentLagSummaryConfigTable,,not-accessible,,current,,A summary table of the switch's LAG config entries
.1.3.6.1.4.1.4526.1.6.1.2.2.2.1,GSM7312-SWITCHING-MIB::agentLagSummaryConfigEntry,,not-accessible,agentLagSummaryLagIndex,current,,Switch's LAG config entry
.1.3.6.1.4.1.4526.1.6.1.2.2.2.1.1,GSM7312-SWITCHING-MIB::agentLagSummaryLagIndex,Integer32,read-only,,current,,Agent LAG IfIndex.  This value corresponds with the LAG interface in the ifTable.
.1.3.6.1.4.1.4526.1.6.1.2.2.2.1.2,GSM7312-SWITCHING-MIB::agentLagSummaryName,OCTET,read-write,,current,,Agent LAG Name.  The associated name of the LAG used during creation.
.1.3.6.1.4.1.4526.1.6.1.2.2.2.1.3,GSM7312-SWITCHING-MIB::agentLagSummaryFlushTimer,Integer32,read-write,,obsolete,,Agent LAG FlushTimer.
.1.3.6.1.4.1.4526.1.6.1.2.2.2.1.4,GSM7312-SWITCHING-MIB::agentLagSummaryLinkTrap,INTEGER,read-write,,current,enable(1):disable(2),Agent LAG LinkTrap.  Configures sending Link Up/Down traps when the LAG interface goes Up or Down.
.1.3.6.1.4.1.4526.1.6.1.2.2.2.1.5,GSM7312-SWITCHING-MIB::agentLagSummaryAdminMode,INTEGER,read-write,,current,enable(1):disable(2),Agent LAG AdminMode.  Administratively enables or disables this LAG interface.
.1.3.6.1.4.1.4526.1.6.1.2.2.2.1.6,GSM7312-SWITCHING-MIB::agentLagSummaryStpMode,INTEGER,read-write,,current,dot1d(1):fast(2):off(3):dot1s(4),Agent LAG StpMode  If Dot1d is enabled, the valid values are: dot1d(1), fast(2), and off(3)  If Dot1s is enabled, the valid values are: off(3) and dot1s(4)
.1.3.6.1.4.1.4526.1.6.1.2.2.2.1.7,GSM7312-SWITCHING-MIB::agentLagSummaryAddPort,Integer32,read-write,,current,,Agent LAG AddPort.   Set to a non 0 value to add a port to the LAG. Values correspond to ifIndex values in the ifTable.  Note: agentPortType for the port to be added must be full duplex and the same speed as previously added port(s), if any.
.1.3.6.1.4.1.4526.1.6.1.2.2.2.1.8,GSM7312-SWITCHING-MIB::agentLagSummaryDeletePort,Integer32,read-write,,current,,Agent LAG DeletePort.  Set to a non 0 value to remove a port from the LAG. Values correspond to ifIndex values in the ifTable.
.1.3.6.1.4.1.4526.1.6.1.2.2.2.1.9,GSM7312-SWITCHING-MIB::agentLagSummaryStatus,INTEGER,read-write,,current,active(1):notInService(2):notReady(3):createAndGo(4):createAndWait(5):destroy(6),Agent LAG Status.  active(1) - This LAG is enabled. destroy(6) - Set to this value to remove the LAG.
.1.3.6.1.4.1.4526.1.6.1.2.2.2.1.10,GSM7312-SWITCHING-MIB::agentLagSummaryType,INTEGER,read-only,,current,static(1):dynamic(2),Agent LAG Type.  static(1) - This LAG is staticly maintained. dynamic(2) - This LAG is dynamicly maintained.
.1.3.6.1.4.1.4526.1.6.1.2.2.3,GSM7312-SWITCHING-MIB::agentLagDetailedConfigTable,,not-accessible,,current,,A detailed table of the switch's LAG config entries
.1.3.6.1.4.1.4526.1.6.1.2.2.3.1,GSM7312-SWITCHING-MIB::agentLagDetailedConfigEntry,,not-accessible,agentLagDetailedLagIndex:agentLagDetailedIfIndex,current,,Switch's LAG config entry
.1.3.6.1.4.1.4526.1.6.1.2.2.3.1.1,GSM7312-SWITCHING-MIB::agentLagDetailedLagIndex,Integer32,read-only,,current,,LAG index
.1.3.6.1.4.1.4526.1.6.1.2.2.3.1.2,GSM7312-SWITCHING-MIB::agentLagDetailedIfIndex,Integer32,read-only,,current,,LAG port index
.1.3.6.1.4.1.4526.1.6.1.2.2.3.1.3,GSM7312-SWITCHING-MIB::agentLagDetailedPortSpeed,OBJECT,read-only,,current,,LAG port speed. See agentPortType for a description and list of valid values.
.1.3.6.1.4.1.4526.1.6.1.2.2.3.1.4,GSM7312-SWITCHING-MIB::agentLagDetailedPortStatus,INTEGER,read-only,,current,active(1):inactive(2),LAG port status.  active(1) - Actively participating in the LAG. inactive(2) - Not participating in the LAG.
.1.3.6.1.4.1.4526.1.6.1.2.2.4,GSM7312-SWITCHING-MIB::agentLagConfigStaticCapability,INTEGER,read-write,,current,enable(1):disable(2),Agent LAG Static Capability. Configures whether Static LAGs are supported on this device.
.1.3.6.1.4.1.4526.1.6.1.2.3,GSM7312-SWITCHING-MIB::agentNetworkConfigGroup,,,,,,
.1.3.6.1.4.1.4526.1.6.1.2.3.1,GSM7312-SWITCHING-MIB::agentNetworkIPAddress,IpAddress,read-write,,current,,The switch's network ip address
.1.3.6.1.4.1.4526.1.6.1.2.3.2,GSM7312-SWITCHING-MIB::agentNetworkSubnetMask,IpAddress,read-write,,current,,The switch's network subnet mask
.1.3.6.1.4.1.4526.1.6.1.2.3.3,GSM7312-SWITCHING-MIB::agentNetworkDefaultGateway,IpAddress,read-write,,current,,The switch's network default gateway
.1.3.6.1.4.1.4526.1.6.1.2.3.4,GSM7312-SWITCHING-MIB::agentNetworkBurnedInMacAddress,OCTET,read-only,,current,,The switch's network Burned-In MAC address
.1.3.6.1.4.1.4526.1.6.1.2.3.5,GSM7312-SWITCHING-MIB::agentNetworkConfigProtocol,INTEGER,read-write,,current,none(1):bootp(2):dhcp(3),The switch's network config protocol
.1.3.6.1.4.1.4526.1.6.1.2.3.6,GSM7312-SWITCHING-MIB::agentNetworkWebMode,INTEGER,read-write,,current,enable(1):disable(2),The switch's network config protocol on next bootup
.1.3.6.1.4.1.4526.1.6.1.2.3.7,GSM7312-SWITCHING-MIB::agentNetworkJavaMode,INTEGER,read-write,,current,enable(1):disable(2),Configures the use of the Java interface through the Web.
.1.3.6.1.4.1.4526.1.6.1.2.3.8,GSM7312-SWITCHING-MIB::agentNetworkMgmtVlan,Integer32,read-write,,current,,The VLAN ID through which the switch can be managed using the  agentNetworkIPAddress
.1.3.6.1.4.1.4526.1.6.1.2.4,GSM7312-SWITCHING-MIB::agentServicePortConfigGroup,,,,,,
.1.3.6.1.4.1.4526.1.6.1.2.4.1,GSM7312-SWITCHING-MIB::agentServicePortIPAddress,IpAddress,read-write,,current,,The switch's ServicePort ip address
.1.3.6.1.4.1.4526.1.6.1.2.4.2,GSM7312-SWITCHING-MIB::agentServicePortSubnetMask,IpAddress,read-write,,current,,The switch's ServicePort subnet mask
.1.3.6.1.4.1.4526.1.6.1.2.4.3,GSM7312-SWITCHING-MIB::agentServicePortDefaultGateway,IpAddress,read-write,,current,,The switch's ServicePort default gateway
.1.3.6.1.4.1.4526.1.6.1.2.4.4,GSM7312-SWITCHING-MIB::agentServicePortBurnedInMacAddress,OCTET,read-only,,current,,The switch's ServicePort Burned-In MAC address
.1.3.6.1.4.1.4526.1.6.1.2.4.5,GSM7312-SWITCHING-MIB::agentServicePortConfigProtocol,INTEGER,read-write,,current,none(1):bootp(2):dhcp(3),The switch's ServicePort config protocol
.1.3.6.1.4.1.4526.1.6.1.2.6,GSM7312-SWITCHING-MIB::agentSnmpConfigGroup,,,,,,
.1.3.6.1.4.1.4526.1.6.1.2.6.1,GSM7312-SWITCHING-MIB::agentSnmpCommunityCreate,OCTET,read-write,,current,,Creates a new SNMP Community entry. Defaults: IPAddress 0.0.0.0 IpMask 0.0.0.0 AccessMode read-only Status config
.1.3.6.1.4.1.4526.1.6.1.2.6.2,GSM7312-SWITCHING-MIB::agentSnmpCommunityConfigTable,,not-accessible,,current,,A table of the switch's SNMP Config entries
.1.3.6.1.4.1.4526.1.6.1.2.6.2.1,GSM7312-SWITCHING-MIB::agentSnmpCommunityConfigEntry,,not-accessible,agentSnmpCommunityIndex,current,,Switch's SNMP Config entry
.1.3.6.1.4.1.4526.1.6.1.2.6.2.1.1,GSM7312-SWITCHING-MIB::agentSnmpCommunityIndex,Integer32,read-only,,current,,The switch's Snmp Community Index
.1.3.6.1.4.1.4526.1.6.1.2.6.2.1.2,GSM7312-SWITCHING-MIB::agentSnmpCommunityName,OCTET,read-write,,current,,The switch's Snmp Community Name This name identifies each SNMP community;  the name can be up to 16 characters, and it is case-sensitive. Community names in the SNMP community must be unique.  If you make multiple entries using the same community name,  the first entry is kept and processed and all duplicate entries are ignored.  
.1.3.6.1.4.1.4526.1.6.1.2.6.2.1.3,GSM7312-SWITCHING-MIB::agentSnmpCommunityIPAddress,IpAddress,read-write,,current,,The switch's Snmp Community IP Address Client IP Address - This attribute is an IP address (or portion thereof)  from which this device will accept SNMP packets with the associated  community. The requesting entity's IP address is logical-ANDed with  the Client IP Mask and the result must match the Client IP Address.  Note: If the Client IP Mask is set  to 0.0.0.0, a Client IP Address of 0.0.0.0 matches all IP addresses.  
.1.3.6.1.4.1.4526.1.6.1.2.6.2.1.4,GSM7312-SWITCHING-MIB::agentSnmpCommunityIPMask,IpAddress,read-write,,current,,The switch's Snmp Community IP Mask Client IP Mask - This attribute is a mask to be logical-ANDed with the requesting entity's IP address before comparison with the Client IP Address.  If the result matches with Client IP Address then the address is an  authenticated IP address. For example, if the Client IP Address  is 9.47.128.0 and the corresponding Client IP Mask is 255.255.255.0,  a range of incoming IP addresses would match, that is, the incoming IP  addresses could be a value in the following range: 9.47.128.0 to 9.47.128.255. To have a specific IP address be the only authenticated IP address, set the  Client IP Address to the required IP address and set the Client IP Mask  to 255.255.255.255.  
.1.3.6.1.4.1.4526.1.6.1.2.6.2.1.5,GSM7312-SWITCHING-MIB::agentSnmpCommunityAccessMode,INTEGER,read-write,,current,,The switch's Snmp Community Access Mode Access Mode - This value can be read-only or read/write.  A community with a read-only access allows for switch information to be displayed. A community with a read/write access allows for configuration  changes to be made and for information to be displayed. 
.1.3.6.1.4.1.4526.1.6.1.2.6.2.1.6,GSM7312-SWITCHING-MIB::agentSnmpCommunityStatus,INTEGER,read-write,,current,active(1):notInService(2):config(3):destroy(4),The switch's Snmp Community Status.  active(1) - This community is active, allowing SNMP managers associated  with this community to manage the switch according to its  access right.   notInService(2) - This community is not active; no SNMP requests using this  community will be accepted. In this case the SNMP manager  associated with this community cannot manage the switch until  the Status is changed back to active(1).  config(3) - The community Status must be set to this value in order to  configure it. When creating a new community entry, initial  Status will be set to this value.  destroy(4) - Set to this value to remove the community from the agent.
.1.3.6.1.4.1.4526.1.6.1.2.6.3,GSM7312-SWITCHING-MIB::agentSnmpTrapReceiverCreate,OCTET,read-write,,current,,Creates a new trap receiver entry.  Defaults: IPAddress 0.0.0.0 status config
.1.3.6.1.4.1.4526.1.6.1.2.6.4,GSM7312-SWITCHING-MIB::agentSnmpTrapReceiverConfigTable,,not-accessible,,current,,Trap messages are sent across a network to an SNMP Network Manager.  These messages alert the manager to events occurring within the switch  or on the network. Up to six simultaneous trap receivers are supported.  
.1.3.6.1.4.1.4526.1.6.1.2.6.4.1,GSM7312-SWITCHING-MIB::agentSnmpTrapReceiverConfigEntry,,not-accessible,agentSnmpTrapReceiverIndex,current,,Switch's Snmp Trace Receiver Config entry
.1.3.6.1.4.1.4526.1.6.1.2.6.4.1.1,GSM7312-SWITCHING-MIB::agentSnmpTrapReceiverIndex,Integer32,read-only,,current,,The switch's Snmp Trap Receiver Index
.1.3.6.1.4.1.4526.1.6.1.2.6.4.1.2,GSM7312-SWITCHING-MIB::agentSnmpTrapReceiverCommunityName,OCTET,read-write,,current,,The switch's Snmp Trap Receiver Community Name. This is the SNMP community name of the remote network manager;  the name can be up to 16 characters, and is case-sensitive.  
.1.3.6.1.4.1.4526.1.6.1.2.6.4.1.3,GSM7312-SWITCHING-MIB::agentSnmpTrapReceiverIPAddress,IpAddress,read-write,,current,,IP Address - Each IP address parameter is four integer numbers.  The numbers range from 0 to 255.  
.1.3.6.1.4.1.4526.1.6.1.2.6.4.1.4,GSM7312-SWITCHING-MIB::agentSnmpTrapReceiverStatus,INTEGER,read-write,,current,active(1):notInService(2):config(3):destroy(4),The switch's Snmp Trap Reciever Status. active(1) - This trap receiver is active, allowing SNMP Traps to  be sent to this receiver.   notInService(2) - This trap reciever is not active; no SNMP Traps will  be sent to this reciever until it's set back to active(1).   config(3) - The trap reciever Status must be set to this value in order  to configure it. When creating a new trap receiver entry,  the Status will initially be set to this value. Note: agentSnmpTrapReceiverIPAddress must be set to non-zero before changing to active(1) or notInService(2).  destroy(4) - Set to this value to remove the trap receiver entry from  the agent.
.1.3.6.1.4.1.4526.1.6.1.2.6.5,GSM7312-SWITCHING-MIB::agentSnmpTrapFlagsConfigGroup,,,,,,
.1.3.6.1.4.1.4526.1.6.1.2.6.5.1,GSM7312-SWITCHING-MIB::agentSnmpAuthenticationTrapFlag,INTEGER,read-write,,current,enable(1):disable(2),Authentication Flag - Enable/Disable authentication Flag.
.1.3.6.1.4.1.4526.1.6.1.2.6.5.2,GSM7312-SWITCHING-MIB::agentSnmpLinkUpDownTrapFlag,INTEGER,read-write,,current,enable(1):disable(2),Link Up/Down Flag - Enable/Disable Link Up/Link Down traps for the  entire switch. When set to Enable, the Link Up/Down traps will be  sent only if the Link Trap flag setting associated with the port  (Port Configuration Menu) is set to Enable. 
.1.3.6.1.4.1.4526.1.6.1.2.6.5.3,GSM7312-SWITCHING-MIB::agentSnmpMultipleUsersTrapFlag,INTEGER,read-write,,current,enable(1):disable(2),Multiple Users Flag - Enable/Disable Multiple User traps. When the value is set to Enable, a Multiple User Trap is sent whenever someone logs in  to the terminal interface (EIA 232 or Telnet) and there is already an  existing terminal interface session. 
.1.3.6.1.4.1.4526.1.6.1.2.6.5.4,GSM7312-SWITCHING-MIB::agentSnmpSpanningTreeTrapFlag,INTEGER,read-write,,current,enable(1):disable(2),Spanning Tree Flag - This flag enables the sending of new root traps and  topology change notification traps.
.1.3.6.1.4.1.4526.1.6.1.2.6.5.5,GSM7312-SWITCHING-MIB::agentSnmpBroadcastStormTrapFlag,INTEGER,read-write,,current,enable(1):disable(2),Broadcast Storm Flag - This flag enables or disables the broadcast  storm trap. You must also enable Broadcast Storm Recovery Mode  (see the Switch Configuration Menu). When this  value is set to Enable and Broadcast Storm Recovery mode is set to Enable,  the Broadcast Storm Start/End traps are sent when the switch enters and  leaves Broadcast Storm Recovery. 
.1.3.6.1.4.1.4526.1.6.1.2.7,GSM7312-SWITCHING-MIB::agentSpanningTreeConfigGroup,,,,,,
.1.3.6.1.4.1.4526.1.6.1.2.7.1,GSM7312-SWITCHING-MIB::agentSpanningTreeMode,INTEGER,read-write,,current,enable(1):disable(2),The switch's Spanning Tree Switch Status
.1.3.6.1.4.1.4526.1.6.1.2.8,GSM7312-SWITCHING-MIB::agentSwitchConfigGroup,,,,,,
.1.3.6.1.4.1.4526.1.6.1.2.8.2,GSM7312-SWITCHING-MIB::agentSwitchBroadcastControlMode,INTEGER,read-write,,current,enable(1):disable(2),The switch config broadcast allows you to enable or disable  broadcast storm recovery mode. When you specify Enable for Broadcast  Storm Recovery and the broadcast traffic on any Ethernet port exceeds  20 percent of the link speed, the switch blocks (discards) the broadcast  traffic until the broadcast traffic returns to 10 percent or less. Upper limit for 10M link is 20% and lower limit is 10%.  For 100M link Upper limit is 5% and lower limit is 2%
.1.3.6.1.4.1.4526.1.6.1.2.8.3,GSM7312-SWITCHING-MIB::agentSwitchDot3FlowControlMode,INTEGER,read-write,,current,enable(1):disable(2),Config switchconfig flowcontrol allows you to enable or disable  802.3x flow control for the switch. This value  applies to only full-duplex mode ports. 
.1.3.6.1.4.1.4526.1.6.1.2.8.4,GSM7312-SWITCHING-MIB::agentSwitchAddressAgingTimeoutTable,,not-accessible,,current,,The switch's address aging timeout table
.1.3.6.1.4.1.4526.1.6.1.2.8.4.1,GSM7312-SWITCHING-MIB::agentSwitchAddressAgingTimeoutEntry,,not-accessible,dot1qFdbId,current,,Aging information about a specific Filtering Database.
.1.3.6.1.4.1.4526.1.6.1.2.8.4.1.1,GSM7312-SWITCHING-MIB::agentSwitchAddressAgingTimeout,Integer32,read-write,,current,,The FDB entry's address aging timeout (in seconds)
.1.3.6.1.4.1.4526.1.6.1.2.8.6,GSM7312-SWITCHING-MIB::agentSwitchIGMPSnoopingGroup,,,,,,
.1.3.6.1.4.1.4526.1.6.1.2.8.6.1,GSM7312-SWITCHING-MIB::agentSwitchIGMPSnoopingAdminMode,INTEGER,read-write,,current,enable(1):disable(2),This enables or disables IGMP Snooping on the system. 
.1.3.6.1.4.1.4526.1.6.1.2.8.6.2,GSM7312-SWITCHING-MIB::agentSwitchIGMPSnoopingGroupMembershipInterval,Integer32,read-write,,current,,The amount of time in seconds a switch will wait for a report for a particular group on a particular interface before it deletes the interface from the entry. 
.1.3.6.1.4.1.4526.1.6.1.2.8.6.3,GSM7312-SWITCHING-MIB::agentSwitchIGMPSnoopingMaxResponseTime,Integer32,read-write,,current,,The amount of time in seconds a switch will wait after sending  a query on an interface because it did not receive a report for  a particular group in that interface. This value must be less  than agentSwitchIGMPSnoopingQueryInterval.
.1.3.6.1.4.1.4526.1.6.1.2.8.6.4,GSM7312-SWITCHING-MIB::agentSwitchIGMPSnoopingMRPExpirationTime,Integer32,read-write,,current,,Multicast Router Present Expiration Time. The amount of time in seconds a switch will wait for a query to be received on an interface before the interface is removed from the list of interfaces with mutlticast routers attached. A value of zero indicates an infinite timeout, i.e. the entries in the list will not expire.
.1.3.6.1.4.1.4526.1.6.1.2.8.6.5,GSM7312-SWITCHING-MIB::agentSwitchIGMPSnoopingPortMask,OCTET,read-write,,current,,IGMP Snooping Port Mask.  This allows configuration of IGMP Snooping on selected ports.  IGMP Snooping cannot be enabled on an interface that has routing enabled, or is a member of a LAG. If a port which has IGMP Snooping  enabled becomes enabled for routing, or is enlisted as a member of a  LAG, IGMP Snooping functionality will be disabled on that port. IGMP Snooping functionality will be subsequently be reenabled if routing is disabled or LAG membership is removed from an interface that had previously had IGMP Snooping enabled.  To obtain port numbers from interface numbers, use the objects agentPortDot1dBasePort and agentPortIfIndex in the agentPortConfigTable  table.
.1.3.6.1.4.1.4526.1.6.1.2.8.6.6,GSM7312-SWITCHING-MIB::agentSwitchIGMPSnoopingMulticastControlFramesProcessed,Counter32,read-only,,current,,Multicast Control Frames Processed by CPU. The number of multicast control frames that have been processed by the CPU.
.1.3.6.1.4.1.4526.1.6.1.2.8.7,GSM7312-SWITCHING-MIB::agentSwitchMFDBGroup,,,,,,
.1.3.6.1.4.1.4526.1.6.1.2.8.7.1,GSM7312-SWITCHING-MIB::agentSwitchMFDBTable,,not-accessible,,current,,The Multicast Forwarding Database table
.1.3.6.1.4.1.4526.1.6.1.2.8.7.1.1,GSM7312-SWITCHING-MIB::agentSwitchMFDBEntry,,not-accessible,agentSwitchMFDBVlanId:agentSwitchMFDBMacAddress:agentSwitchMFDBProtocolType,current,,Contains Forwarding and Filtering information per Vlan Index, MAC Address, and  Component User.
.1.3.6.1.4.1.4526.1.6.1.2.8.7.1.1.1,GSM7312-SWITCHING-MIB::agentSwitchMFDBVlanId,Unsigned32,read-only,,current,,Vlan Index for which this entry is associated with.
.1.3.6.1.4.1.4526.1.6.1.2.8.7.1.1.2,GSM7312-SWITCHING-MIB::agentSwitchMFDBMacAddress,OCTET,read-only,,current,,A multicast MAC address for which the switch has forwarding and or  filtering information.
.1.3.6.1.4.1.4526.1.6.1.2.8.7.1.1.3,GSM7312-SWITCHING-MIB::agentSwitchMFDBProtocolType,INTEGER,read-only,,current,static(1):gmrp(2):igmp(3),The component that is responsible for this entry in the Multicast  Forwarding Database.
.1.3.6.1.4.1.4526.1.6.1.2.8.7.1.1.4,GSM7312-SWITCHING-MIB::agentSwitchMFDBType,INTEGER,read-only,,current,static(1):dynamic(2),This displays the type of the entry.   static(1) - Entries configured by the end user dynamic(2) - Entries added as a result of a learning process or protocol
.1.3.6.1.4.1.4526.1.6.1.2.8.7.1.1.5,GSM7312-SWITCHING-MIB::agentSwitchMFDBDescription,OCTET,read-only,,current,,Text description of this multicast table entry.
.1.3.6.1.4.1.4526.1.6.1.2.8.7.1.1.6,GSM7312-SWITCHING-MIB::agentSwitchMFDBForwardingPortMask,OCTET,read-only,,current,,BitMask indicating which ports this entry indicates should be forwarded.  To obtain port numbers from interface numbers, use the objects agentPortDot1dBasePort and agentPortIfIndex in the agentPortConfigTable  table.
.1.3.6.1.4.1.4526.1.6.1.2.8.7.1.1.7,GSM7312-SWITCHING-MIB::agentSwitchMFDBFilteringPortMask,OCTET,read-only,,current,,BitMask indicating which ports this entry indicates should be filtered.  To obtain port numbers from interface numbers, use the objects agentPortDot1dBasePort and agentPortIfIndex in the agentPortConfigTable  table.
.1.3.6.1.4.1.4526.1.6.1.2.8.7.2,GSM7312-SWITCHING-MIB::agentSwitchMFDBSummaryTable,,not-accessible,,current,,The Multicast Forwarding Database Summary table
.1.3.6.1.4.1.4526.1.6.1.2.8.7.2.1,GSM7312-SWITCHING-MIB::agentSwitchMFDBSummaryEntry,,not-accessible,agentSwitchMFDBSummaryVlanId:agentSwitchMFDBSummaryMacAddress,current,,Summarizes the forwarding ports for all components registered for all MFDB table entries with the same Vlan Index and MAC Address.
.1.3.6.1.4.1.4526.1.6.1.2.8.7.2.1.1,GSM7312-SWITCHING-MIB::agentSwitchMFDBSummaryVlanId,Unsigned32,read-only,,current,,Vlan Index for which this entry is associated with.
.1.3.6.1.4.1.4526.1.6.1.2.8.7.2.1.2,GSM7312-SWITCHING-MIB::agentSwitchMFDBSummaryMacAddress,OCTET,read-only,,current,,A multicast MAC address for which the switch has forwarding and or  filtering information.
.1.3.6.1.4.1.4526.1.6.1.2.8.7.2.1.3,GSM7312-SWITCHING-MIB::agentSwitchMFDBSummaryForwardingPortMask,OCTET,read-only,,current,,Port Mask indicating which ports this entry indicates should be forwarded.  To obtain port numbers from interface numbers, use the objects agentPortDot1dBasePort and agentPortIfIndex in the agentPortConfigTable  table.
.1.3.6.1.4.1.4526.1.6.1.2.8.7.3,GSM7312-SWITCHING-MIB::agentSwitchMFDBMaxTableEntries,Gauge32,read-only,,current,,This displays the maximum number of entries that can possibly be in  the Multicast Forwarding Database table.
.1.3.6.1.4.1.4526.1.6.1.2.8.7.4,GSM7312-SWITCHING-MIB::agentSwitchMFDBMostEntriesUsed,Gauge32,read-only,,current,,This displays the largest number of entries that have been present  in the Multicast Forwarding Database table. This value is also known  as the MFDB high-water mark.
.1.3.6.1.4.1.4526.1.6.1.2.8.7.5,GSM7312-SWITCHING-MIB::agentSwitchMFDBCurrentEntries,Gauge32,read-only,,current,,This displays the current number of entries in the Multicast  Forwarding Database table.
.1.3.6.1.4.1.4526.1.6.1.2.9,GSM7312-SWITCHING-MIB::agentTransferConfigGroup,,,,,,
.1.3.6.1.4.1.4526.1.6.1.2.9.1,GSM7312-SWITCHING-MIB::agentTransferUploadGroup,,,,,,
.1.3.6.1.4.1.4526.1.6.1.2.9.1.1,GSM7312-SWITCHING-MIB::agentTransferUploadMode,INTEGER,read-write,,current,tftp(1):xmodem(2):ymodem(3):zmodem(4),Transfer upload mode configures the mode to use when uploading from the  switch. The mode is either X/Y/ZMODEM or TFTP. X/Y/ZMODEM is valid only when the  file transfer is initiated by the serial EIA 232 port.  
.1.3.6.1.4.1.4526.1.6.1.2.9.1.2,GSM7312-SWITCHING-MIB::agentTransferUploadServerIP,IpAddress,read-write,,current,,Transfer upload tftpserverip configures the IP address of the server  where the file is located. It is valid only when the Transfer Mode is  TFTP. The address is 4 integer bytes ranging from 0 to 255.
.1.3.6.1.4.1.4526.1.6.1.2.9.1.3,GSM7312-SWITCHING-MIB::agentTransferUploadPath,OCTET,read-write,,current,,Transfer upload tftppath configures the directory path where the file is to be uploaded to. The switch remembers the last file path used.  
.1.3.6.1.4.1.4526.1.6.1.2.9.1.4,GSM7312-SWITCHING-MIB::agentTransferUploadFilename,OCTET,read-write,,current,,Transfer upload tftpfilename configures the file name for the file being  uploaded from the switch. It can be up to 32 alphanumeric characters.  The switch remembers the last file name used.  File path can be appended to the file name if the string is less than 17  characters. Otherwise, the File Path field will need to be used and the  File Name will be appended to the File Path as is. An example would be  File Path set to c:\tftp\code\ and File Name set to e1r1v1.opr.  Note: File Name, File Path, and TFTP Server IP Address are applicable  only if the Transfer Mode is TFTP.
.1.3.6.1.4.1.4526.1.6.1.2.9.1.5,GSM7312-SWITCHING-MIB::agentTransferUploadDataType,INTEGER,read-write,,current,config(2):errorlog(3):messagelog(4):traplog(5),Transfer upload datatype configures the type of file to upload from the  switch.  The types for upload are: - Configuration File - Error log - Message log - Trap log 
.1.3.6.1.4.1.4526.1.6.1.2.9.1.6,GSM7312-SWITCHING-MIB::agentTransferUploadStart,INTEGER,read-write,,current,enable(1):disable(2),Transfer upload start will start an upload transfer.  The agentTransferUploadMode object must not be set to xmodem(2),
.1.3.6.1.4.1.4526.1.6.1.2.9.1.7,GSM7312-SWITCHING-MIB::agentTransferUploadStatus,INTEGER,read-only,,current,notInitiated(1):transferStarting(2):errorStarting(3):wrongFileType(4):updatingConfig(5):invalidConfigFile(6):writingToFlash(7):failureWritingToFlash(8):checkingCRC(9):failedCRC(10):unknownDirection(11):transferSuccessful(12):transferFailed(13),Indicates the current status of an upload transfer.
.1.3.6.1.4.1.4526.1.6.1.2.9.2,GSM7312-SWITCHING-MIB::agentTransferDownloadGroup,,,,,,
.1.3.6.1.4.1.4526.1.6.1.2.9.2.1,GSM7312-SWITCHING-MIB::agentTransferDownloadMode,INTEGER,read-write,,current,tftp(1):xmodem(2):ymodem(3):zmodem(4),Transfer download mode configures the mode to use when downloading  to the switch. The mode is either X/Y/ZMODEM or TFTP. X/Y/ZMODEM is valid only  when the file transfer is initiated by the serial EIA 232 port.  
.1.3.6.1.4.1.4526.1.6.1.2.9.2.2,GSM7312-SWITCHING-MIB::agentTransferDownloadServerIP,IpAddress,read-write,,current,,Transfer download tftpserverip configures the IP address of the server  where the file is located. It is valid only when the Transfer Mode is TFTP.  The address is 4 integer bytes ranging from 0 to 255.  
.1.3.6.1.4.1.4526.1.6.1.2.9.2.3,GSM7312-SWITCHING-MIB::agentTransferDownloadPath,OCTET,read-write,,current,,Transfer download tftppath configures the directory path where the  file is located. The switch remembers the last file path used.  
.1.3.6.1.4.1.4526.1.6.1.2.9.2.4,GSM7312-SWITCHING-MIB::agentTransferDownloadFilename,OCTET,read-write,,current,,Transfer download tftpfilename configures the file name for the file  being downloaded to the switch. It can be up to 32 alphanumeric characters.  The switch remembers the last file name used.  File path can be appended to the file name if the string is less than 33  characters. Otherwise, the File Path field will need to be used and the  File Name will be appended to the File Path as is. An example would be  File Path set to c:\tftp\code\ and File Name set to e1r1v1.opr.  Note: File Name, File Path, and TFTP Server IP Address are applicable  only if the Transfer Mode is TFTP.
.1.3.6.1.4.1.4526.1.6.1.2.9.2.5,GSM7312-SWITCHING-MIB::agentTransferDownloadDataType,INTEGER,read-write,,current,code(2):config(3):sshkey-rsa1(4):sshkey-rsa2(5):sshkey-dsa(6):sslpem-root(7):sslpem-server(8):sslpem-dhweak(9):sslpem-dhstrong(10),Transfer download datatype configures the type of file to download to  the switch.  The types for download are:  code - Code File config - Configuration File sshkey-rsa1 - SSH-1 RSA Key File sshkey-rsa2 - SSH-2 RSA Key PEM File sshkey-dsa - SSH-2 DSA Key PEM File sslpem-root - SSL Trusted Root Certificate PEM File sslpem-server - SSL Server Certificate PEM File sslpem-dhweak - SSL DH Weak Encryption Parameter PEM File sslpem-dhstrong - SSL DH Strong Encryption Parameter PEM File  Note: SSH Key files can only be downloaded if SSH Server is administratively  disabled, and there are no active SSH sessions. 
.1.3.6.1.4.1.4526.1.6.1.2.9.2.6,GSM7312-SWITCHING-MIB::agentTransferDownloadStart,INTEGER,read-write,,current,enable(1):disable(2),Transfer download start will start an download transfer.  The agentTransferDownloadMode object must not be set to xmodem(2),
.1.3.6.1.4.1.4526.1.6.1.2.9.2.7,GSM7312-SWITCHING-MIB::agentTransferDownloadStatus,INTEGER,read-only,,current,notInitiated(1):transferStarting(2):errorStarting(3):wrongFileType(4):updatingConfig(5):invalidConfigFile(6):writingToFlash(7):failureWritingToFlash(8):checkingCRC(9):failedCRC(10):unknownDirection(11):transferSuccessful(12):transferFailed(13),Indicates the current status of an download transfer.
.1.3.6.1.4.1.4526.1.6.1.2.10,GSM7312-SWITCHING-MIB::agentPortMirroringGroup,,,,,,
.1.3.6.1.4.1.4526.1.6.1.2.10.1,GSM7312-SWITCHING-MIB::agentMirroredPortIfIndex,Integer32,read-write,,current,,IfIndex of the mirrored port
.1.3.6.1.4.1.4526.1.6.1.2.10.2,GSM7312-SWITCHING-MIB::agentProbePortIfIndex,Integer32,read-write,,current,,IfIndex of the probe port
.1.3.6.1.4.1.4526.1.6.1.2.10.3,GSM7312-SWITCHING-MIB::agentPortMirroringMode,INTEGER,read-write,,current,enable(1):disable(2):delete(3),Port mirroring mode:  enable - enable mirroring mode disable - disable mirroring mode delete - clear MirroredPort and Probe Port configuration
.1.3.6.1.4.1.4526.1.6.1.2.12,GSM7312-SWITCHING-MIB::agentDot3adAggPortTable,,not-accessible,,current,,This table provides 802.3ad link aggregation information for each physical port that is not available through the standard MIB.
.1.3.6.1.4.1.4526.1.6.1.2.12.1,GSM7312-SWITCHING-MIB::agentDot3adAggPortEntry,,not-accessible,agentDot3adAggPort,current,,Information about a table entry. The agentDot3adAggPort identifies the external interface number of the port.
.1.3.6.1.4.1.4526.1.6.1.2.12.1.1,GSM7312-SWITCHING-MIB::agentDot3adAggPort,Integer32,read-only,,current,,ifIndex of this physical port
.1.3.6.1.4.1.4526.1.6.1.2.12.1.2,GSM7312-SWITCHING-MIB::agentDot3adAggPortLACPMode,INTEGER,read-write,,current,enable(1):disable(2),Enable/disable 802.3ad LACP on this port
.1.3.6.1.4.1.4526.1.6.1.2.13,GSM7312-SWITCHING-MIB::agentPortConfigTable,,not-accessible,,current,,A table of the switch's physical port config entries
.1.3.6.1.4.1.4526.1.6.1.2.13.1,GSM7312-SWITCHING-MIB::agentPortConfigEntry,,not-accessible,agentPortDot1dBasePort,current,,Switch's physical port config entry
.1.3.6.1.4.1.4526.1.6.1.2.13.1.1,GSM7312-SWITCHING-MIB::agentPortDot1dBasePort,Integer32,read-only,,current,,The port number of this port.
.1.3.6.1.4.1.4526.1.6.1.2.13.1.2,GSM7312-SWITCHING-MIB::agentPortIfIndex,Integer32,read-only,,current,,The switch's Port IfIndex
.1.3.6.1.4.1.4526.1.6.1.2.13.1.3,GSM7312-SWITCHING-MIB::agentPortIanaType,INTEGER,read-only,,current,other(1):regular1822(2):hdh1822(3):ddnX25(4):rfc877x25(5):ethernetCsmacd(6):iso88023Csmacd(7):iso88024TokenBus(8):iso88025TokenRing(9):iso88026Man(10):starLan(11):proteon10Mbit(12):proteon80Mbit(13):hyperchannel(14):fddi(15):lapb(16):sdlc(17):ds1(18):e1(19):basicISDN(20):primaryISDN(21):propPointToPointSerial(22):ppp(23):softwareLoopback(24):eon(25):ethernet3Mbit(26):nsip(27):slip(28):ultra(29):ds3(30):sip(31):frameRelay(32):rs232(33):para(34):arcnet(35):arcnetPlus(36):atm(37):miox25(38):sonet(39):x25ple(40):iso88022llc(41):localTalk(42):smdsDxi(43):frameRelayService(44):v35(45):hssi(46):hippi(47):modem(48):aal5(49):sonetPath(50):sonetVT(51):smdsIcip(52):propVirtual(53):propMultiplexor(54):ieee80212(55):fibreChannel(56):hippiInterface(57):frameRelayInterconnect(58):aflane8023(59):aflane8025(60):cctEmul(61):fastEther(62):isdn(63):v11(64):v36(65):g703at64k(66):g703at2mb(67):qllc(68):fastEtherFX(69):channel(70):ieee80211(71):ibm370parChan(72):escon(73):dlsw(74):isdns(75):isdnu(76):lapd(77):ipSwitch(78):rsrb(79):atmLogical(80):ds0(81):ds0Bundle(82):bsc(83):async(84):cnr(85):iso88025Dtr(86):eplrs(87):arap(88):propCnls(89):hostPad(90):termPad(91):frameRelayMPI(92):x213(93):adsl(94):radsl(95):sdsl(96):vdsl(97):iso88025CRFPInt(98):myrinet(99):voiceEM(100):voiceFXO(101):voiceFXS(102):voiceEncap(103):voiceOverIp(104):atmDxi(105):atmFuni(106):atmIma(107):pppMultilinkBundle(108):ipOverCdlc(109):ipOverClaw(110):stackToStack(111):virtualIpAddress(112):mpc(113):ipOverAtm(114):iso88025Fiber(115):tdlc(116):gigabitEthernet(117):hdlc(118):lapf(119):v37(120):x25mlp(121):x25huntGroup(122):transpHdlc(123):interleave(124):fast(125):ip(126):docsCableMaclayer(127):docsCableDownstream(128):docsCableUpstream(129):a12MppSwitch(130):tunnel(131):coffee(132):ces(133):atmSubInterface(134):l2vlan(135):l3ipvlan(136):l3ipxvlan(137):digitalPowerline(138):mediaMailOverIp(139):dtm(140):dcn(141):ipForward(142):msdsl(143):ieee1394(144):if-gsn(145):dvbRccMacLayer(146):dvbRccDownstream(147):dvbRccUpstream(148):atmVirtual(149):mplsTunnel(150):srp(151):voiceOverAtm(152):voiceOverFrameRelay(153):idsl(154):compositeLink(155):ss7SigLink(156):propWirelessP2P(157):frForward(158):rfc1483(159):usb(160):ieee8023adLag(161):bgppolicyaccounting(162):frf16MfrBundle(163):h323Gatekeeper(164):h323Proxy(165):mpls(166):mfSigLink(167):hdsl2(168):shdsl(169):ds1FDL(170):pos(171):dvbAsiIn(172):dvbAsiOut(173):plc(174):nfas(175):tr008(176):gr303RDT(177):gr303IDT(178):isup(179):propDocsWirelessMaclayer(180):propDocsWirelessDownstream(181):propDocsWirelessUpstream(182):hiperlan2(183):propBWAp2Mp(184):sonetOverheadChannel(185):digitalWrapperOverheadChannel(186):aal2(187):radioMAC(188):atmRadio(189):imt(190):mvl(191):reachDSL(192):frDlciEndPt(193):atmVciEndPt(194):opticalChannel(195):opticalTransport(196):propAtm(197):voiceOverCable(198):infiniband(199):teLink(200):q2931(201):virtualTg(202):sipTg(203):sipSig(204):docsCableUpstreamChannel(205):econet(206):pon155(207):pon622(208):bridge(209):linegroup(210):voiceEMFGD(211):voiceFGDEANA(212):voiceDID(213):mpegTransport(214):sixToFour(215):gtp(216):pdnEtherLoop1(217):pdnEtherLoop2(218):opticalChannelGroup(219):homepna(220):gfp(221):ciscoISLvlan(222):actelisMetaLOOP(223):fcipLink(224):rpr(225):qam(226):lmp(227):cblVectaStar(228):docsCableMCmtsDownstream(229):adsl2(230):macSecControlledIF(231):macSecUncontrolledIF(232):aviciOpticalEther(233):atmbond(234):voiceFGDOS(235):mocaVersion1(236):ieee80216WMAN(237):adsl2plus(238):dvbRcsMacLayer(239):dvbTdm(240):dvbRcsTdma(241):x86Laps(242):wwanPP(243):wwanPP2(244):voiceEBS(245):ifPwType(246):ilan(247):pip(248):aluELP(249):gpon(250):vdsl2(251):capwapDot11Profile(252):capwapDot11Bss(253):capwapWtpVirtualRadio(254):bits(255):docsCableUpstreamRfPort(256):cableDownstreamRfPort(257):vmwareVirtualNic(258):ieee802154(259):otnOdu(260):otnOtu(261):ifVfiType(262):g9981(263):g9982(264):g9983(265):aluEpon(266):aluEponOnu(267):aluEponPhysicalUni(268):aluEponLogicalLink(269):aluGponOnu(270):aluGponPhysicalUni(271):vmwareNicTeam(272):docsOfdmDownstream(277):docsOfdmaUpstream(278):gfast(279):sdci(280):xboxWireless(281):fastdsl(282):docsCableScte55d1FwdOob(283):docsCableScte55d1RetOob(284):docsCableScte55d2DsOob(285):docsCableScte55d2UsOob(286):docsCableNdf(287):docsCableNdr(288):ptm(289):ghn(290):otnOtsi(291):otnOtuc(292):otnOduc(293):otnOtsig(294):microwaveCarrierTermination(295):microwaveRadioLinkTerminal(296),The switch's Port Type
.1.3.6.1.4.1.4526.1.6.1.2.13.1.4,GSM7312-SWITCHING-MIB::agentPortSTPMode,INTEGER,read-write,,current,dot1d(1):fast(2):off(3),The switch's Port Spanning Tree Protocol Mode STP mode values are:   dot1d (the default)  fast, indicates you want to use the fast spanning tree mode off, indicates the STP mode is turned off for a particular port This object is only supported when the Dot1d Protocol is enabled.
.1.3.6.1.4.1.4526.1.6.1.2.13.1.5,GSM7312-SWITCHING-MIB::agentPortSTPState,INTEGER,read-only,,current,blocking(1):listening(2):learning(3):forwarding(4):disabled(5),The switch's Port Spanning Tree Protocol State. This object is only supported when the Dot1d Protocol is enabled.
.1.3.6.1.4.1.4526.1.6.1.2.13.1.6,GSM7312-SWITCHING-MIB::agentPortAdminMode,INTEGER,read-write,,current,enable(1):disable(2),The switch's Port Admin Mode
.1.3.6.1.4.1.4526.1.6.1.2.13.1.7,GSM7312-SWITCHING-MIB::agentPortPhysicalMode,INTEGER,read-write,,obsolete,auto-negotiate(1):half-10(2):full-10(3):half-100(4):full-100(5):half-100fx(6):full-100fx(7):full-1000sx(8),The switch's Port Speed Mode. This is the configured physical mode. This object is read-only for gigabit ports
.1.3.6.1.4.1.4526.1.6.1.2.13.1.8,GSM7312-SWITCHING-MIB::agentPortPhysicalStatus,INTEGER,read-only,,obsolete,auto-negotiate(1):half-10(2):full-10(3):half-100(4):full-100(5):half-100fx(6):full-100fx(7):full-1000sx(8),The switch's Port Physical Speed Status. This is the current actual speed.
.1.3.6.1.4.1.4526.1.6.1.2.13.1.9,GSM7312-SWITCHING-MIB::agentPortLinkTrapMode,INTEGER,read-write,,current,enable(1):disable(2),If enabled, link up and link down traps will be sent for this port.
.1.3.6.1.4.1.4526.1.6.1.2.13.1.10,GSM7312-SWITCHING-MIB::agentPortClearStats,INTEGER,read-write,,current,enable(1):disable(2),clear stats for this port only
.1.3.6.1.4.1.4526.1.6.1.2.13.1.11,GSM7312-SWITCHING-MIB::agentPortDefaultType,OBJECT,read-write,,current,,This object identifies the default administrative port type, to be used in conjunction with the operational port type denoted by agentPortType.  The set of possible values for this object is the same as the set defined for the agentPortType object. This object represents the administratively-configured type of the MAU. If auto-negotiation is not enabled or is not implemented for this MAU, the value of this object determines the operational type of the MAU. In this case, a set to this object will force the MAU into the specified operating mode. If auto-negotiation is implemented and enabled for this MAU, the operational type of the MAU is determined by auto-negotiation, and the value of this object denotes the type to which the MAU will automatically revert if/when auto-negotiation is later disabled.  The valid values for this object are:  dot3MauType10BaseTHD dot3MauType10BaseTFD dot3MauType100BaseTXHD dot3MauType100BaseTXFD dot3MauType100BaseFXFD dot3MauType1000BaseSXFD
.1.3.6.1.4.1.4526.1.6.1.2.13.1.12,GSM7312-SWITCHING-MIB::agentPortType,OBJECT,read-only,,current,,This object identifies the port type. An initial set of MAU types are defined in RFC 2668. The assignment of OBJECT IDENTIFIERs to new types of MAUs is managed by the IANA. If the MAU type is unknown, the object identifier unknownMauType OBJECT IDENTIFIER ::= { 0 0 } is returned. Note that unknownMauType is a syntactically valid object identifier, and any conformant implementation of ASN.1 and the BER must be able to generate and recognize this value. This object represents the operational type of the MAU, as determined by either (1) the result of the auto-negotiation function or (2) if auto-negotiation is not enabled or is not implemented for this MAU, by the value of the object agentPortDefaultType, or (3) for the GigE card a value determined by the GBIC connected to the card. In case (2), a set to the object agentPortDefaultType will force the MAU into the new operating mode.  The valid values for this object are:  dot3MauType10BaseTHD dot3MauType10BaseTFD dot3MauType100BaseTXHD dot3MauType100BaseTXFD dot3MauType100BaseFXFD dot3MauType1000BaseSXFD dot3MauType1000BaseTFD
.1.3.6.1.4.1.4526.1.6.1.2.13.1.13,GSM7312-SWITCHING-MIB::agentPortAutoNegAdminStatus,INTEGER,read-write,,current,enable(1):disable(2),This object identifies the administration status of auto negotiation for this port.
.1.3.6.1.4.1.4526.1.6.1.2.13.1.14,GSM7312-SWITCHING-MIB::agentPortDot3FlowControlMode,INTEGER,read-write,,current,enable(1):disable(2),Config flowcontrol allows you to enable or disable  802.3x flow control for this port. This value  applies to only full-duplex mode ports. 
.1.3.6.1.4.1.4526.1.6.1.2.13.1.15,GSM7312-SWITCHING-MIB::agentPortDVlanTagMode,INTEGER,read-write,,current,enable(1):disable(2),Controls the Double Vlan Tag mode on this port.
.1.3.6.1.4.1.4526.1.6.1.2.13.1.16,GSM7312-SWITCHING-MIB::agentPortDVlanTagEthertype,Integer32,read-write,,current,,Configures the Ethertype for the Double Vlan Tag for this port.  Commonly used are the Ethertypes for vman tags (34984, or 0x88A8)  and dot1q tags (33024, or 0x8100).
.1.3.6.1.4.1.4526.1.6.1.2.13.1.17,GSM7312-SWITCHING-MIB::agentPortDVlanTagCustomerId,Integer32,read-write,,current,,Configures the Customer ID for the Double Vlan Tag for this port.
.1.3.6.1.4.1.4526.1.6.1.2.13.1.18,GSM7312-SWITCHING-MIB::agentPortMaxFrameSizeLimit,Integer32,read-only,,current,,This object identifies the largest value that can be configured for agentPortMaxFrameSize
.1.3.6.1.4.1.4526.1.6.1.2.13.1.19,GSM7312-SWITCHING-MIB::agentPortMaxFrameSize,Integer32,read-write,,current,,This object identifies the currently configured maximum frame size value for this port. The maximmum value that this object can be set to is the value of agentPortMaxFrameSizeLimit. For Ethernet ports which support 802.1Q vlan tagging, the minimum value that this object can be set to is 1522
.1.3.6.1.4.1.4526.1.6.1.2.14,GSM7312-SWITCHING-MIB::agentProtocolConfigGroup,,,,,,
.1.3.6.1.4.1.4526.1.6.1.2.14.1,GSM7312-SWITCHING-MIB::agentProtocolGroupCreate,OCTET,read-write,,current,,Set to non-empty string to create a Protocol-Based VLAN group.
.1.3.6.1.4.1.4526.1.6.1.2.14.2,GSM7312-SWITCHING-MIB::agentProtocolGroupTable,,not-accessible,,current,,A table of the switch's Protocol-based VLAN entries
.1.3.6.1.4.1.4526.1.6.1.2.14.2.1,GSM7312-SWITCHING-MIB::agentProtocolGroupEntry,,not-accessible,agentProtocolGroupId,current,,Switch's Protocol-based VLAN entry
.1.3.6.1.4.1.4526.1.6.1.2.14.2.1.1,GSM7312-SWITCHING-MIB::agentProtocolGroupId,Integer32,read-only,,current,,Group identifier of the Protocol-based VLAN entry.
.1.3.6.1.4.1.4526.1.6.1.2.14.2.1.2,GSM7312-SWITCHING-MIB::agentProtocolGroupName,OCTET,read-only,,current,,Group name of the Protocol-based VLAN entry.
.1.3.6.1.4.1.4526.1.6.1.2.14.2.1.3,GSM7312-SWITCHING-MIB::agentProtocolGroupVlanId,Integer32,read-write,,current,,VLAN associated with the Protocol-based VLAN entry. Set to 0 to remove.
.1.3.6.1.4.1.4526.1.6.1.2.14.2.1.4,GSM7312-SWITCHING-MIB::agentProtocolGroupProtocolIP,INTEGER,read-write,,current,enable(1):disable(2),The status of the IP protocol association with the Protocol-based VLAN entry.
.1.3.6.1.4.1.4526.1.6.1.2.14.2.1.5,GSM7312-SWITCHING-MIB::agentProtocolGroupProtocolARP,INTEGER,read-write,,current,enable(1):disable(2),The status of the ARP protocol association with the Protocol-based VLAN entry.
.1.3.6.1.4.1.4526.1.6.1.2.14.2.1.6,GSM7312-SWITCHING-MIB::agentProtocolGroupProtocolIPX,INTEGER,read-write,,current,enable(1):disable(2),The status of the IPX protocol association with the Protocol-based VLAN entry.
.1.3.6.1.4.1.4526.1.6.1.2.14.2.1.7,GSM7312-SWITCHING-MIB::agentProtocolGroupStatus,INTEGER,read-write,,current,active(1):notInService(2):notReady(3):createAndGo(4):createAndWait(5):destroy(6),The status of the Protocol-based VLAN entry.  active(1) - this entry is active destroy(6) - remove this entry
.1.3.6.1.4.1.4526.1.6.1.2.14.3,GSM7312-SWITCHING-MIB::agentProtocolGroupPortTable,,not-accessible,,current,,A table of the switch's physical port config entries
.1.3.6.1.4.1.4526.1.6.1.2.14.3.1,GSM7312-SWITCHING-MIB::agentProtocolGroupPortEntry,,not-accessible,agentProtocolGroupId:agentProtocolGroupPortIfIndex,current,,Switch's physical port config entry
.1.3.6.1.4.1.4526.1.6.1.2.14.3.1.1,GSM7312-SWITCHING-MIB::agentProtocolGroupPortIfIndex,Integer32,read-only,,current,,The interface number of this instance.
.1.3.6.1.4.1.4526.1.6.1.2.14.3.1.2,GSM7312-SWITCHING-MIB::agentProtocolGroupPortStatus,INTEGER,read-create,,current,active(1):notInService(2):notReady(3):createAndGo(4):createAndWait(5):destroy(6),The status of this entry.  active(1) - the port is associated with this group createAndGo(4) - add the port to this group createAndWait(5) - add the port to this group destroy(6) - remove the port from this group
.1.3.6.1.4.1.4526.1.6.1.2.15,GSM7312-SWITCHING-MIB::agentStpSwitchConfigGroup,,,,,,
.1.3.6.1.4.1.4526.1.6.1.2.15.1,GSM7312-SWITCHING-MIB::agentStpConfigDigestKey,OCTET,read-only,,current,,The MST configuration digest key.
.1.3.6.1.4.1.4526.1.6.1.2.15.2,GSM7312-SWITCHING-MIB::agentStpConfigFormatSelector,Unsigned32,read-only,,current,,The MST configuration format selector. A value other than 0 (zero)  indicates non-support for the IEEE 802.1s standard.
.1.3.6.1.4.1.4526.1.6.1.2.15.3,GSM7312-SWITCHING-MIB::agentStpConfigName,OCTET,read-write,,current,,The MST configuration name of at most 32 characters.
.1.3.6.1.4.1.4526.1.6.1.2.15.4,GSM7312-SWITCHING-MIB::agentStpConfigRevision,Unsigned32,read-write,,current,,The MST configuration revision. The default value is 1.
.1.3.6.1.4.1.4526.1.6.1.2.15.5,GSM7312-SWITCHING-MIB::agentStpForceVersion,INTEGER,read-write,,current,dot1d(1):dot1w(2):dot1s(3),The MST configuration force protocol version. The default version is dot1s.
.1.3.6.1.4.1.4526.1.6.1.2.15.6,GSM7312-SWITCHING-MIB::agentStpAdminMode,INTEGER,read-write,,current,enable(1):disable(2),The spanning tree operational status.  enable(1) - enables spanning tree operational status on the switch. disable(2) - disables spanning tree operational status on the switch.  The default status is disabled.
.1.3.6.1.4.1.4526.1.6.1.2.15.7,GSM7312-SWITCHING-MIB::agentStpPortTable,,not-accessible,,current,,STP port table.
.1.3.6.1.4.1.4526.1.6.1.2.15.7.1,GSM7312-SWITCHING-MIB::agentStpPortEntry,,not-accessible,ifIndex,current,,STP port entry.
.1.3.6.1.4.1.4526.1.6.1.2.15.7.1.1,GSM7312-SWITCHING-MIB::agentStpPortState,INTEGER,read-write,,current,enable(1):disable(2),The administrative bridge port state.  enable(1) - enables the port. disable(2) - disables the port.  The default port state is enabled for the first 4095 ports and  disabled for any ports beyond.
.1.3.6.1.4.1.4526.1.6.1.2.15.7.1.2,GSM7312-SWITCHING-MIB::agentStpPortStatsMstpBpduRx,Counter32,read-only,,current,,The MSTP BPDUs received on a specific port.
.1.3.6.1.4.1.4526.1.6.1.2.15.7.1.3,GSM7312-SWITCHING-MIB::agentStpPortStatsMstpBpduTx,Counter32,read-only,,current,,The MSTP BPDUs sent from a specific port.
.1.3.6.1.4.1.4526.1.6.1.2.15.7.1.4,GSM7312-SWITCHING-MIB::agentStpPortStatsRstpBpduRx,Counter32,read-only,,current,,The RSTP BPDUs received on a specific port.
.1.3.6.1.4.1.4526.1.6.1.2.15.7.1.5,GSM7312-SWITCHING-MIB::agentStpPortStatsRstpBpduTx,Counter32,read-only,,current,,The RSTP BPDUs sent from a specific port.
.1.3.6.1.4.1.4526.1.6.1.2.15.7.1.6,GSM7312-SWITCHING-MIB::agentStpPortStatsStpBpduRx,Counter32,read-only,,current,,The STP BPDUs received on a specific port.
.1.3.6.1.4.1.4526.1.6.1.2.15.7.1.7,GSM7312-SWITCHING-MIB::agentStpPortStatsStpBpduTx,Counter32,read-only,,current,,The STP BPDUs sent from a specific port.
.1.3.6.1.4.1.4526.1.6.1.2.15.7.1.8,GSM7312-SWITCHING-MIB::agentStpPortUpTime,TimeTicks,read-only,,current,,Time since port was reset.  It is displayed in days, hours, minutes, and seconds.
.1.3.6.1.4.1.4526.1.6.1.2.15.7.1.9,GSM7312-SWITCHING-MIB::agentStpPortMigrationCheck,INTEGER,read-write,,current,false(0):true(1),Force the specified port to transmit RSTP or MSTP BPDU's.   Supported values: false(0) - BPDUs are not to be transmitted. true(1) - BPDUs are to be transmitted  A non-zero value indicates that BPDUs are to be sent on the specified port.
.1.3.6.1.4.1.4526.1.6.1.2.15.8,GSM7312-SWITCHING-MIB::agentStpCstConfigGroup,,,,,,
.1.3.6.1.4.1.4526.1.6.1.2.15.8.1,GSM7312-SWITCHING-MIB::agentStpCstHelloTime,Unsigned32,read-only,,current,,The MSTP root port hello time for the CIST.
.1.3.6.1.4.1.4526.1.6.1.2.15.8.2,GSM7312-SWITCHING-MIB::agentStpCstMaxAge,Unsigned32,read-only,,current,,The MSTP root port max age for the CIST.
.1.3.6.1.4.1.4526.1.6.1.2.15.8.3,GSM7312-SWITCHING-MIB::agentStpCstRegionalRootId,OCTET,read-only,,current,,The MSTP regional root identifier for the CIST.
.1.3.6.1.4.1.4526.1.6.1.2.15.8.4,GSM7312-SWITCHING-MIB::agentStpCstRegionalRootPathCost,Unsigned32,read-only,,current,,The MSTP regional root path cost for the CIST.
.1.3.6.1.4.1.4526.1.6.1.2.15.8.5,GSM7312-SWITCHING-MIB::agentStpCstRootFwdDelay,Unsigned32,read-only,,current,,The MSTP root port forward delay for the CIST.
.1.3.6.1.4.1.4526.1.6.1.2.15.8.6,GSM7312-SWITCHING-MIB::agentStpCstBridgeFwdDelay,Unsigned32,read-write,,current,,The MSTP bridge forward delay for the CIST. The default value is 15.
.1.3.6.1.4.1.4526.1.6.1.2.15.8.7,GSM7312-SWITCHING-MIB::agentStpCstBridgeHelloTime,Unsigned32,read-write,,current,,The MSTP bridge hello time for the CIST. The default value is 2.
.1.3.6.1.4.1.4526.1.6.1.2.15.8.8,GSM7312-SWITCHING-MIB::agentStpCstBridgeHoldTime,Unsigned32,read-only,,current,,The MSTP bridge hold time for the CIST.
.1.3.6.1.4.1.4526.1.6.1.2.15.8.9,GSM7312-SWITCHING-MIB::agentStpCstBridgeMaxAge,Unsigned32,read-write,,current,,The MSTP bridge max age for the CIST. The default value is 20.
.1.3.6.1.4.1.4526.1.6.1.2.15.9,GSM7312-SWITCHING-MIB::agentStpCstPortTable,,not-accessible,,current,,CIST port table.
.1.3.6.1.4.1.4526.1.6.1.2.15.9.1,GSM7312-SWITCHING-MIB::agentStpCstPortEntry,,not-accessible,ifIndex,current,,CIST port entry.
.1.3.6.1.4.1.4526.1.6.1.2.15.9.1.1,GSM7312-SWITCHING-MIB::agentStpCstPortOperEdge,INTEGER,read-only,,current,enable(1):disable(2),The MSTP operational status of a specific port for the CIST.
.1.3.6.1.4.1.4526.1.6.1.2.15.9.1.2,GSM7312-SWITCHING-MIB::agentStpCstPortOperPointToPoint,INTEGER,read-only,,current,true(1):false(2),The MSTP operational point to point mac of a specific port for the CIST.
.1.3.6.1.4.1.4526.1.6.1.2.15.9.1.3,GSM7312-SWITCHING-MIB::agentStpCstPortTopologyChangeAck,INTEGER,read-only,,current,true(1):false(2),The MSTP topology change acknowledge for a specific port in the CIST.
.1.3.6.1.4.1.4526.1.6.1.2.15.9.1.4,GSM7312-SWITCHING-MIB::agentStpCstPortEdge,INTEGER,read-write,,current,enable(1):disable(2),The administrative state of a specific port in CIST.  enable(1) - enables the port. disable(2) - disables the port.  The default port state is disabled.
.1.3.6.1.4.1.4526.1.6.1.2.15.9.1.5,GSM7312-SWITCHING-MIB::agentStpCstPortForwardingState,INTEGER,read-only,,current,discarding(1):learning(2):forwarding(3):disabled(4):manualFwd(5):notParticipate(6),The MSTP forwarding state of a specific port in CIST.
.1.3.6.1.4.1.4526.1.6.1.2.15.9.1.6,GSM7312-SWITCHING-MIB::agentStpCstPortId,OCTET,read-only,,current,,The MSTP port identifier of a specific port in CIST.
.1.3.6.1.4.1.4526.1.6.1.2.15.9.1.7,GSM7312-SWITCHING-MIB::agentStpCstPortPathCost,Unsigned32,read-write,,current,,The MSTP port path cost in CIST. The default value will  correspond to the recommendation specified in IEEE 802.1s Table 13-2  which varies depending upon link speed.
.1.3.6.1.4.1.4526.1.6.1.2.15.9.1.8,GSM7312-SWITCHING-MIB::agentStpCstPortPriority,Unsigned32,read-write,,current,,The MSTP port priority in CIST. The priority is  in the increments of 16. The default value is 128.
.1.3.6.1.4.1.4526.1.6.1.2.15.9.1.9,GSM7312-SWITCHING-MIB::agentStpCstDesignatedBridgeId,OCTET,read-only,,current,,The MSTP designated bridge ID of a specific port in CIST.
.1.3.6.1.4.1.4526.1.6.1.2.15.9.1.10,GSM7312-SWITCHING-MIB::agentStpCstDesignatedCost,Unsigned32,read-only,,current,,The MSTP designated cost of a specific port in CIST.
.1.3.6.1.4.1.4526.1.6.1.2.15.9.1.11,GSM7312-SWITCHING-MIB::agentStpCstDesignatedPortId,OCTET,read-only,,current,,The MSTP designated port ID of a specific port in CIST.
.1.3.6.1.4.1.4526.1.6.1.2.15.10,GSM7312-SWITCHING-MIB::agentStpMstTable,,not-accessible,,current,,MST table.
.1.3.6.1.4.1.4526.1.6.1.2.15.10.1,GSM7312-SWITCHING-MIB::agentStpMstEntry,,not-accessible,agentStpMstId,current,,MST entry.
.1.3.6.1.4.1.4526.1.6.1.2.15.10.1.1,GSM7312-SWITCHING-MIB::agentStpMstId,Unsigned32,read-only,,current,,The MSTP instance ID.
.1.3.6.1.4.1.4526.1.6.1.2.15.10.1.2,GSM7312-SWITCHING-MIB::agentStpMstBridgePriority,Unsigned32,read-write,,current,,The MSTP bridge priority in a specific instance. The priority is  in the increments of 4096. The recommended default value is 32768.
.1.3.6.1.4.1.4526.1.6.1.2.15.10.1.3,GSM7312-SWITCHING-MIB::agentStpMstBridgeIdentifier,OCTET,read-only,,current,,The MSTP bridge identifier in a specific instance.
.1.3.6.1.4.1.4526.1.6.1.2.15.10.1.4,GSM7312-SWITCHING-MIB::agentStpMstDesignatedRootId,OCTET,read-only,,current,,The MSTP designated root bridge identifier in a specific instance.
.1.3.6.1.4.1.4526.1.6.1.2.15.10.1.5,GSM7312-SWITCHING-MIB::agentStpMstRootPathCost,Unsigned32,read-only,,current,,The MSTP root path cost in a specific instance.
.1.3.6.1.4.1.4526.1.6.1.2.15.10.1.6,GSM7312-SWITCHING-MIB::agentStpMstRootPortId,OCTET,read-only,,current,,The MSTP root port ID in a specific instance.
.1.3.6.1.4.1.4526.1.6.1.2.15.10.1.7,GSM7312-SWITCHING-MIB::agentStpMstTimeSinceTopologyChange,TimeTicks,read-only,,current,,The MSTP time since the last topology change in a specific instance.
.1.3.6.1.4.1.4526.1.6.1.2.15.10.1.8,GSM7312-SWITCHING-MIB::agentStpMstTopologyChangeCount,Counter32,read-only,,current,,The MSTP count of topology changes in a specific instance.
.1.3.6.1.4.1.4526.1.6.1.2.15.10.1.9,GSM7312-SWITCHING-MIB::agentStpMstTopologyChangeParm,INTEGER,read-only,,current,true(1):false(2),The MSTP topology change parameter in a specific instance.
.1.3.6.1.4.1.4526.1.6.1.2.15.10.1.10,GSM7312-SWITCHING-MIB::agentStpMstRowStatus,INTEGER,read-create,,current,active(1):notInService(2):notReady(3):createAndGo(4):createAndWait(5):destroy(6),The MSTP instance status.  Supported values: active(1) - valid instance. createAndGo(4) - used to create a new instance. destroy(6) - removes an instance.
.1.3.6.1.4.1.4526.1.6.1.2.15.11,GSM7312-SWITCHING-MIB::agentStpMstPortTable,,not-accessible,,current,,MST port table.
.1.3.6.1.4.1.4526.1.6.1.2.15.11.1,GSM7312-SWITCHING-MIB::agentStpMstPortEntry,,not-accessible,agentStpMstId:ifIndex,current,,MST port entry.
.1.3.6.1.4.1.4526.1.6.1.2.15.11.1.1,GSM7312-SWITCHING-MIB::agentStpMstPortForwardingState,INTEGER,read-only,,current,discarding(1):learning(2):forwarding(3):disabled(4):manualFwd(5):notParticipate(6),The MSTP forwarding state of a specific port in a specific instance.
.1.3.6.1.4.1.4526.1.6.1.2.15.11.1.2,GSM7312-SWITCHING-MIB::agentStpMstPortId,OCTET,read-only,,current,,The MSTP port identifier of a specific port in a specific instance.
.1.3.6.1.4.1.4526.1.6.1.2.15.11.1.3,GSM7312-SWITCHING-MIB::agentStpMstPortPathCost,Unsigned32,read-write,,current,,The MSTP port path cost in a specific instance. The default value will  correspond to the recommendation specified in IEEE 802.1s Table 13-2  which varies depending upon link speed.
.1.3.6.1.4.1.4526.1.6.1.2.15.11.1.4,GSM7312-SWITCHING-MIB::agentStpMstPortPriority,Unsigned32,read-write,,current,,The MSTP port priority in a specific instance. The priority is  in the increments of 16. The default value is 128.
.1.3.6.1.4.1.4526.1.6.1.2.15.11.1.5,GSM7312-SWITCHING-MIB::agentStpMstDesignatedBridgeId,OCTET,read-only,,current,,The MSTP designated bridge ID of a specific port in a specific instance.
.1.3.6.1.4.1.4526.1.6.1.2.15.11.1.6,GSM7312-SWITCHING-MIB::agentStpMstDesignatedCost,Unsigned32,read-only,,current,,The MSTP designated cost of a specific port in a specific instance.
.1.3.6.1.4.1.4526.1.6.1.2.15.11.1.7,GSM7312-SWITCHING-MIB::agentStpMstDesignatedPortId,OCTET,read-only,,current,,The MSTP designated port ID of a specific port in a specific instance.
.1.3.6.1.4.1.4526.1.6.1.2.15.12,GSM7312-SWITCHING-MIB::agentStpMstVlanTable,,not-accessible,,current,,MST VLAN table.
.1.3.6.1.4.1.4526.1.6.1.2.15.12.1,GSM7312-SWITCHING-MIB::agentStpMstVlanEntry,,not-accessible,agentStpMstId:dot1qVlanIndex,current,,MST VLAN entry.
.1.3.6.1.4.1.4526.1.6.1.2.15.12.1.1,GSM7312-SWITCHING-MIB::agentStpMstVlanRowStatus,INTEGER,read-create,,current,active(1):notInService(2):notReady(3):createAndGo(4):createAndWait(5):destroy(6),The association status of an MSTP instance and a VLAN.  Supported values: active(1) - valid association between an MSTP instance and a VLAN. createAndGo(4) - used to create a new association between an MSTP instance and a VLAN. destroy(6) - removes the association between an MSTP instance and a VLAN.
.1.3.6.1.4.1.4526.1.6.1.2.16,GSM7312-SWITCHING-MIB::agentAuthenticationGroup,,,,,,
.1.3.6.1.4.1.4526.1.6.1.2.16.1,GSM7312-SWITCHING-MIB::agentAuthenticationListCreate,OCTET,read-write,,current,,Authentication List Create If set to a non empty string, creates a new Authentication List for configuration.
.1.3.6.1.4.1.4526.1.6.1.2.16.2,GSM7312-SWITCHING-MIB::agentAuthenticationListTable,,not-accessible,,current,,MST VLAN table.
.1.3.6.1.4.1.4526.1.6.1.2.16.2.1,GSM7312-SWITCHING-MIB::agentAuthenticationListEntry,,not-accessible,agentAuthenticationListIndex,current,,MST VLAN entry.
.1.3.6.1.4.1.4526.1.6.1.2.16.2.1.1,GSM7312-SWITCHING-MIB::agentAuthenticationListIndex,Unsigned32,not-accessible,,current,,Authenticaiton List Index Unique number used for indexing into this table.
.1.3.6.1.4.1.4526.1.6.1.2.16.2.1.2,GSM7312-SWITCHING-MIB::agentAuthenticationListName,OCTET,read-only,,current,,Authenticaiton List Name Unique name used to identify the Authentication List from other tables.
.1.3.6.1.4.1.4526.1.6.1.2.16.2.1.3,GSM7312-SWITCHING-MIB::agentAuthenticationListMethod1,INTEGER,read-write,,current,local(1):radius(2):reject(3),Authenticion List Method 1 Configures the first authentication method to use when this list is  specified.
.1.3.6.1.4.1.4526.1.6.1.2.16.2.1.4,GSM7312-SWITCHING-MIB::agentAuthenticationListMethod2,INTEGER,read-write,,current,undefined(1):local(2):radius(3):reject(4),Authenticion List Method 2 Configures the second authentication method to use when this list is  specified.
.1.3.6.1.4.1.4526.1.6.1.2.16.2.1.5,GSM7312-SWITCHING-MIB::agentAuthenticationListMethod3,INTEGER,read-write,,current,undefined(1):local(2):radius(3):reject(4),Authenticion List Method 3 Configures the third authentication method to use when this list is  specified.
.1.3.6.1.4.1.4526.1.6.1.2.16.2.1.6,GSM7312-SWITCHING-MIB::agentAuthenticationListStatus,INTEGER,read-write,,current,active(1):notInService(2):notReady(3):createAndGo(4):createAndWait(5):destroy(6),The status of the Authentication List.  Supported values: active(1) - indicates a valid Authenticaiton List destroy(6) - removes the Authentication List.
.1.3.6.1.4.1.4526.1.6.1.2.16.3,GSM7312-SWITCHING-MIB::agentUserConfigDefaultAuthenticationList,OCTET,read-write,,current,,Default Authentication List This object configures which authentication list to use for users which do not have an Authentication List configured. The list  must be configured before setting.
.1.3.6.1.4.1.4526.1.6.1.2.16.4,GSM7312-SWITCHING-MIB::agentUserAuthenticationConfigTable,,not-accessible,,current,,User Authentication Config Table
.1.3.6.1.4.1.4526.1.6.1.2.16.4.1,GSM7312-SWITCHING-MIB::agentUserAuthenticationConfigEntry,,not-accessible,,current,,User Authentication Config Entry
.1.3.6.1.4.1.4526.1.6.1.2.16.4.1.1,GSM7312-SWITCHING-MIB::agentUserAuthenticationList,OCTET,read-write,,current,,User Authentication List This object configures which authentication list to use for this user. The list must be configured before setting.
.1.3.6.1.4.1.4526.1.6.1.2.16.5,GSM7312-SWITCHING-MIB::agentUserPortConfigTable,,not-accessible,,current,,User Port Config Table
.1.3.6.1.4.1.4526.1.6.1.2.16.5.1,GSM7312-SWITCHING-MIB::agentUserPortConfigEntry,,not-accessible,,current,,User Port Config Entry
.1.3.6.1.4.1.4526.1.6.1.2.16.5.1.1,GSM7312-SWITCHING-MIB::agentUserPortSecurity,OCTET,read-write,,current,,User Port Port Security This object configures which ports the user has access to. Ports are indexed based on dot1dBasePort entries in  dot1dBasePortTable.
.1.3.6.1.4.1.4526.1.6.1.2.17,GSM7312-SWITCHING-MIB::agentClassOfServiceGroup,,,,,,
.1.3.6.1.4.1.4526.1.6.1.2.17.1,GSM7312-SWITCHING-MIB::agentClassOfServiceTable,,not-accessible,,current,,A table that contains information about the 802.1p priority mapping to traffic class priority queue for every physical port.
.1.3.6.1.4.1.4526.1.6.1.2.17.1.1,GSM7312-SWITCHING-MIB::agentClassOfServiceEntry,,not-accessible,agentClassOfServicePriority,current,,A 802.1p priority mapped to a traffic class priority queue.
.1.3.6.1.4.1.4526.1.6.1.2.17.1.1.1,GSM7312-SWITCHING-MIB::agentClassOfServicePriority,Integer32,not-accessible,,current,,The Priority value determined for the received frame. This value is equivalent to the priority indicated in the tagged frame received, or one of the evaluated priorities, determined according to the media-type. For untagged frames received from Ethernet media, this value is equal to the dot1dPortDefaultUserPriority value for the ingress port.
.1.3.6.1.4.1.4526.1.6.1.2.17.1.1.2,GSM7312-SWITCHING-MIB::agentClassOfServiceClass,Integer32,read-write,,current,,Traffic class priority queue the received frame is mapped to.
.1.3.6.1.4.1.4526.1.6.1.3,GSM7312-SWITCHING-MIB::agentSystemGroup,,,,,,
.1.3.6.1.4.1.4526.1.6.1.3.1,GSM7312-SWITCHING-MIB::agentSaveConfig,INTEGER,read-write,,current,enable(1):disable(2),Enable agentSaveConfig will initiate an configuration save to nvram. Disable agentSaveConfig after a configuration save will reset  agentSaveConfigStatus back to notInitiated state.
.1.3.6.1.4.1.4526.1.6.1.3.2,GSM7312-SWITCHING-MIB::agentClearConfig,INTEGER,read-write,,current,enable(1):disable(2),clear config to factory defaults
.1.3.6.1.4.1.4526.1.6.1.3.3,GSM7312-SWITCHING-MIB::agentClearLags,INTEGER,read-write,,current,enable(1):disable(2),clear lag configuration
.1.3.6.1.4.1.4526.1.6.1.3.4,GSM7312-SWITCHING-MIB::agentClearLoginSessions,INTEGER,read-write,,current,enable(1):disable(2),close all telnet sessions
.1.3.6.1.4.1.4526.1.6.1.3.5,GSM7312-SWITCHING-MIB::agentClearPasswords,INTEGER,read-write,,current,enable(1):disable(2),reset passwords
.1.3.6.1.4.1.4526.1.6.1.3.6,GSM7312-SWITCHING-MIB::agentClearPortStats,INTEGER,read-write,,current,enable(1):disable(2),clear all port statistics
.1.3.6.1.4.1.4526.1.6.1.3.7,GSM7312-SWITCHING-MIB::agentClearSwitchStats,INTEGER,read-write,,current,enable(1):disable(2),clear all switch statistics
.1.3.6.1.4.1.4526.1.6.1.3.8,GSM7312-SWITCHING-MIB::agentClearTrapLog,INTEGER,read-write,,current,enable(1):disable(2),clear trap log
.1.3.6.1.4.1.4526.1.6.1.3.9,GSM7312-SWITCHING-MIB::agentClearVlan,INTEGER,read-write,,current,enable(1):disable(2),clear vlan entries
.1.3.6.1.4.1.4526.1.6.1.3.10,GSM7312-SWITCHING-MIB::agentResetSystem,INTEGER,read-write,,current,enable(1):disable(2),reset the switch
.1.3.6.1.4.1.4526.1.6.1.3.11,GSM7312-SWITCHING-MIB::agentSaveConfigStatus,INTEGER,read-only,,current,notInitiated(1):savingInProcess(2):savingComplete(3),Indicates the current status of an save configuration request.
.1.3.6.1.4.1.4526.1.6.1.4,GSM7312-SWITCHING-MIB::agentCableTesterGroup,,,,,,
.1.3.6.1.4.1.4526.1.6.1.4.1,GSM7312-SWITCHING-MIB::agentCableTesterStatus,INTEGER,read-write,,current,active(1):success(2):failure(3):uninitialized(4),Status of the Virtual Cable Tester active(1) - cable testing is in progress. Set to this value to start the test. success(2) - A successful test was performed. Cannot be set. failure(3) - A failure was encountered during the test. Cannot be set. uninitialized(4) - No test has been performed yet. Cannot be set.
.1.3.6.1.4.1.4526.1.6.1.4.2,GSM7312-SWITCHING-MIB::agentCableTesterIfIndex,Unsigned32,read-write,,current,,Determines on which port to perform the cable test. Limited to  copper based ports.
.1.3.6.1.4.1.4526.1.6.1.4.3,GSM7312-SWITCHING-MIB::agentCableTesterCableStatus,INTEGER,read-only,,current,normal(1):open(2):short(3):unknown(4),Indicates the results of the Cable Test.   normal(1) - The cable is working correctly. open(2) - The cable is disconnected or there is a faulty connector. short(3) - There is an electrical short in the cable. unknown(4) - No test has been performed yet, or a test is currently in progress.
.1.3.6.1.4.1.4526.1.6.1.4.4,GSM7312-SWITCHING-MIB::agentCableTesterMinimumCableLength,Unsigned32,read-only,,current,,The estimated length of the cable in meters. This value  indicates the shortest length estimated. This object will return 0 if agentCableTesterStatus is not success(2) or the cable length is unknown.
.1.3.6.1.4.1.4526.1.6.1.4.5,GSM7312-SWITCHING-MIB::agentCableTesterMaximumCableLength,Unsigned32,read-only,,current,,The estimated length of the cable in meters. This value  indicates the longest length estimated. This object will return 0 if agentCableTesterStatus is not success(2) or the cable length is unknown.
.1.3.6.1.4.1.4526.1.6.1.4.6,GSM7312-SWITCHING-MIB::agentCableTesterCableFailureLocation,Unsigned32,read-only,,current,,The estimated distance in meters from the end of the cable to the failure location. This object will return 0 if  agentCableTesterStatus is not success(2).
.1.3.6.1.4.1.4526.1.6.1.50,GSM7312-SWITCHING-MIB::gsm7312SwitchingTraps,,,,,,
.1.3.6.1.4.1.4526.1.6.1.50.1,GSM7312-SWITCHING-MIB::multipleUsersTrap,,,,,,trapMgrMultipleUsersLogTrap.
.1.3.6.1.4.1.4526.1.6.1.50.2,GSM7312-SWITCHING-MIB::broadcastStormStartTrap,,,,,,trapMgrBCastStormStartLogTrap.
.1.3.6.1.4.1.4526.1.6.1.50.3,GSM7312-SWITCHING-MIB::broadcastStormEndTrap,,,,,,trapMgrBCastStormEndLogTrap.
.1.3.6.1.4.1.4526.1.6.1.50.4,GSM7312-SWITCHING-MIB::linkFailureTrap,,,,,,trapMgrLinkFailureLogTrap.
.1.3.6.1.4.1.4526.1.6.1.50.5,GSM7312-SWITCHING-MIB::vlanRequestFailureTrap,,,,,,trapMgrVlanRequestFailureLogTrap
.1.3.6.1.4.1.4526.1.6.1.50.6,GSM7312-SWITCHING-MIB::vlanDeleteLastTrap,,,,,,trapMgrLastVlanDeleteLastLogTrap
.1.3.6.1.4.1.4526.1.6.1.50.7,GSM7312-SWITCHING-MIB::vlanDefaultCfgFailureTrap,,,,,,trapMgrDefaultVlanCfgFailureLogTrap
.1.3.6.1.4.1.4526.1.6.1.50.8,GSM7312-SWITCHING-MIB::vlanRestoreFailureTrap,,,,,,trapMgrVlanRestoreFailureLogTrap
.1.3.6.1.4.1.4526.1.6.1.50.9,GSM7312-SWITCHING-MIB::fanFailureTrap,,,,,,trapMgrFanFailureLogTrap.
.1.3.6.1.4.1.4526.1.6.1.50.10,GSM7312-SWITCHING-MIB::stpInstanceNewRootTrap,,,,,,trapMgrStpInstanceNewRootTrap
.1.3.6.1.4.1.4526.1.6.1.50.11,GSM7312-SWITCHING-MIB::stpInstanceTopologyChangeTrap,,,,,,trapMgrStpInstanceTopologyChange
.1.3.6.1.4.1.4526.1.6.1.50.12,GSM7312-SWITCHING-MIB::powerSupplyStatusChangeTrap,,,,,,powerSupplyStatusChangeTrap
.1.3.6.1.4.1.4526.1.6.2,GSM7312-ROUTING-MIB::gsm7312Routing,,,,,,
.1.3.6.1.4.1.4526.1.6.2.1,GSM7312-ROUTING-MIB::agentSwitchArpGroup,,,,,,
.1.3.6.1.4.1.4526.1.6.2.1.1,GSM7312-ROUTING-MIB::agentSwitchArpAgeoutTime,Integer32,read-write,,current,,Configures the ARP entry ageout time in seconds. Allowable range: 15-21600
.1.3.6.1.4.1.4526.1.6.2.1.2,GSM7312-ROUTING-MIB::agentSwitchArpResponseTime,Integer32,read-write,,current,,Configures the ARP request response timeout in seconds. Allowable range: 1-10
.1.3.6.1.4.1.4526.1.6.2.1.3,GSM7312-ROUTING-MIB::agentSwitchArpMaxRetries,Integer32,read-write,,current,,Configures the ARP count of maximum request for retries. Allowable range: 0-10
.1.3.6.1.4.1.4526.1.6.2.1.4,GSM7312-ROUTING-MIB::agentSwitchArpCacheSize,Integer32,read-write,,current,,Configures the ARP maximum number of entries in the cache.
.1.3.6.1.4.1.4526.1.6.2.1.5,GSM7312-ROUTING-MIB::agentSwitchArpDynamicRenew,INTEGER,read-write,,current,enable(1):disable(2),This indicates the current setting of ARP dynamic renew mode. 
.1.3.6.1.4.1.4526.1.6.2.1.6,GSM7312-ROUTING-MIB::agentSwitchArpTotalEntryCountCurrent,Gauge32,read-only,,current,,Current number of entries in the ARP cache.
.1.3.6.1.4.1.4526.1.6.2.1.7,GSM7312-ROUTING-MIB::agentSwitchArpTotalEntryCountPeak,Gauge32,read-only,,current,,Peak number of entries recorded in the ARP cache over
.1.3.6.1.4.1.4526.1.6.2.1.8,GSM7312-ROUTING-MIB::agentSwitchArpStaticEntryCountCurrent,Gauge32,read-only,,current,,Current number of configured static ARP entries.
.1.3.6.1.4.1.4526.1.6.2.1.9,GSM7312-ROUTING-MIB::agentSwitchArpStaticEntryCountMax,Integer32,read-only,,current,,Maximum number of configurable static ARP entries.
.1.3.6.1.4.1.4526.1.6.2.1.10,GSM7312-ROUTING-MIB::agentSwitchArpTable,,not-accessible,,current,,This table augments the MIB-II ipNetToMediaTable by providing per-interface ARP entry information.
.1.3.6.1.4.1.4526.1.6.2.1.10.1,GSM7312-ROUTING-MIB::agentSwitchArpEntry,,not-accessible,agentSwitchArpIpAddress,current,,
.1.3.6.1.4.1.4526.1.6.2.1.10.1.1,GSM7312-ROUTING-MIB::agentSwitchArpAge,TimeTicks,read-only,,current,,This defines the time (in seconds) since the ARP entry 
.1.3.6.1.4.1.4526.1.6.2.1.10.1.2,GSM7312-ROUTING-MIB::agentSwitchArpIpAddress,IpAddress,read-only,,current,,The IP Address assigned to each interface.
.1.3.6.1.4.1.4526.1.6.2.1.10.1.3,GSM7312-ROUTING-MIB::agentSwitchArpMacAddress,OCTET,read-create,,current,,The hardware MAX Address that each interface maps to.
.1.3.6.1.4.1.4526.1.6.2.1.10.1.4,GSM7312-ROUTING-MIB::agentSwitchArpInterface,Integer32,read-only,,current,,The Associated IfIndex which identified the ARP Entry.
.1.3.6.1.4.1.4526.1.6.2.1.10.1.5,GSM7312-ROUTING-MIB::agentSwitchArpType,INTEGER,read-only,,current,local(1):gateway(2):static(3):dynamic(4),The type of ARP entry.
.1.3.6.1.4.1.4526.1.6.2.1.10.1.6,GSM7312-ROUTING-MIB::agentSwitchArpStatus,INTEGER,read-write,,current,active(1):notInService(2):notReady(3):createAndGo(4):createAndWait(5):destroy(6),The status of this ARP entry. Setting this object destroy will remove the entry.
.1.3.6.1.4.1.4526.1.6.2.2,GSM7312-ROUTING-MIB::agentSwitchIpGroup,,,,,,
.1.3.6.1.4.1.4526.1.6.2.2.1,GSM7312-ROUTING-MIB::agentSwitchIpRoutingMode,INTEGER,read-write,,current,enable(1):disable(2),Administratively enables/disables routing on the switch.
.1.3.6.1.4.1.4526.1.6.2.2.3,GSM7312-ROUTING-MIB::agentSwitchIpInterfaceTable,,not-accessible,,current,,
.1.3.6.1.4.1.4526.1.6.2.2.3.1,GSM7312-ROUTING-MIB::agentSwitchIpInterfaceEntry,,not-accessible,agentSwitchIpInterfaceIfIndex,current,,
.1.3.6.1.4.1.4526.1.6.2.2.3.1.1,GSM7312-ROUTING-MIB::agentSwitchIpInterfaceIfIndex,Integer32,read-only,,current,,The IfIndex associated with this instance.
.1.3.6.1.4.1.4526.1.6.2.2.3.1.2,GSM7312-ROUTING-MIB::agentSwitchIpInterfaceIpAddress,IpAddress,read-write,,current,,The IpAddress assigned to this interface. When setting this value, the value of agentSwitchIpInterfaceNetMask must be set at the same time.
.1.3.6.1.4.1.4526.1.6.2.2.3.1.3,GSM7312-ROUTING-MIB::agentSwitchIpInterfaceNetMask,IpAddress,read-write,,current,,The NetMask assigned to this interface. When setting this value, the  value of agentSwitchIpInterfaceIpAddress must be set at the same time.
.1.3.6.1.4.1.4526.1.6.2.2.3.1.4,GSM7312-ROUTING-MIB::agentSwitchIpInterfaceClearIp,INTEGER,read-write,,current,enable(1):disable(2),Sets the interfaces IpAddress and NetMask back to 0.0.0.0
.1.3.6.1.4.1.4526.1.6.2.2.3.1.5,GSM7312-ROUTING-MIB::agentSwitchIpInterfaceRoutingMode,INTEGER,read-write,,current,enable(1):disable(2),Enables or disables routing for this interface.
.1.3.6.1.4.1.4526.1.6.2.2.4,GSM7312-ROUTING-MIB::agentSwitchIpRouterDiscoveryTable,,not-accessible,,current,,There is no global administrative flag for router discovery. The global routing flag (agentSwitchIpRoutingMode) will be used for this purpose. If routing is disabled, router discovery is disabled as well.
.1.3.6.1.4.1.4526.1.6.2.2.4.1,GSM7312-ROUTING-MIB::agentSwitchIpRouterDiscoveryEntry,,not-accessible,agentSwitchIpRouterDiscoveryIfIndex,current,,
.1.3.6.1.4.1.4526.1.6.2.2.4.1.1,GSM7312-ROUTING-MIB::agentSwitchIpRouterDiscoveryIfIndex,Integer32,read-only,,current,,Interface Number to configure Router Discovery on.
.1.3.6.1.4.1.4526.1.6.2.2.4.1.2,GSM7312-ROUTING-MIB::agentSwitchIpRouterDiscoveryAdvertiseMode,INTEGER,read-write,,current,enable(1):disable(2),Enable or disable router discovery on the interface.
.1.3.6.1.4.1.4526.1.6.2.2.4.1.3,GSM7312-ROUTING-MIB::agentSwitchIpRouterDiscoveryMaxAdvertisementInterval,Integer32,read-write,,current,,Maximum time allowed between sending router advertisements  from the interface.
.1.3.6.1.4.1.4526.1.6.2.2.4.1.4,GSM7312-ROUTING-MIB::agentSwitchIpRouterDiscoveryMinAdvertisementInterval,Integer32,read-write,,current,,Minimum time allowed between sending router advertisements from the interface.  This value must be less than or equal to  agentSwitchIpRouterDiscoveryMaxAdvertisementInterval.
.1.3.6.1.4.1.4526.1.6.2.2.4.1.5,GSM7312-ROUTING-MIB::agentSwitchIpRouterDiscoveryAdvertisementLifetime,Integer32,read-write,,current,,Value of lifetime field of router advertsisement sent from  the interface.  This value must be greater than or equal to  agentSwitchIpRouterDiscoveryMaxAdvertisementInterval.
.1.3.6.1.4.1.4526.1.6.2.2.4.1.6,GSM7312-ROUTING-MIB::agentSwitchIpRouterDiscoveryPreferenceLevel,Integer32,read-write,,current,,Preferability of the address as a default router address, related to other addresses on the same subnet. This is defined as the larger the number, the higher the preference.
.1.3.6.1.4.1.4526.1.6.2.2.4.1.7,GSM7312-ROUTING-MIB::agentSwitchIpRouterDiscoveryAdvertisementAddress,IpAddress,read-write,,current,,Address used when sending router advertisements from the interface.
.1.3.6.1.4.1.4526.1.6.2.2.5,GSM7312-ROUTING-MIB::agentSwitchIpVlanTable,,not-accessible,,current,,
.1.3.6.1.4.1.4526.1.6.2.2.5.1,GSM7312-ROUTING-MIB::agentSwitchIpVlanEntry,,not-accessible,agentSwitchIpVlanId,current,,A Static VLAN for which routing can be enabled/disabled
.1.3.6.1.4.1.4526.1.6.2.2.5.1.1,GSM7312-ROUTING-MIB::agentSwitchIpVlanId,Integer32,read-only,,current,,The Vlan's Id.
.1.3.6.1.4.1.4526.1.6.2.2.5.1.2,GSM7312-ROUTING-MIB::agentSwitchIpVlanIfIndex,Integer32,read-only,,current,,The IfIndex associated with this VLAN.
.1.3.6.1.4.1.4526.1.6.2.2.5.1.3,GSM7312-ROUTING-MIB::agentSwitchIpVlanRoutingStatus,INTEGER,read-create,,current,active(1):notInService(2):notReady(3):createAndGo(4):createAndWait(5):destroy(6),Status of Routing mode per Vlan. active(1) - Vlan is enabled for routing createAndGo(4) - Adds Vlan entry for routing destroy(6) - Removes Vlan from routing
.1.3.6.1.4.1.4526.1.6.2.3,GSM7312-ROUTING-MIB::agentRouterRipConfigGroup,,,,,,
.1.3.6.1.4.1.4526.1.6.2.3.1,GSM7312-ROUTING-MIB::agentRouterRipAdminState,INTEGER,read-write,,current,enable(1):disable(2),Sets the administrative mode of RIP in the router.
.1.3.6.1.4.1.4526.1.6.2.3.2,GSM7312-ROUTING-MIB::agentRouterRipSplitHorizonMode,INTEGER,read-write,,current,none(1):simple(2):poisonReverse(3),Sets the RIP split horizon operating mode in the router.
.1.3.6.1.4.1.4526.1.6.2.3.3,GSM7312-ROUTING-MIB::agentRouterRipAutoSummaryMode,INTEGER,read-write,,current,enable(1):disable(2),Sets the RIP auto summarization mode in the router.
.1.3.6.1.4.1.4526.1.6.2.3.4,GSM7312-ROUTING-MIB::agentRouterRipHostRoutesAcceptMode,INTEGER,read-write,,current,enable(1):disable(2),Sets the RIP host route acceptance mode in the router.
.1.3.6.1.4.1.4526.1.6.2.3.5,GSM7312-ROUTING-MIB::agentRouterRipDefaultMetric,Integer32,read-write,,current,,Default metric of redistributed routes, when RIP redistributes  from other protocols.
.1.3.6.1.4.1.4526.1.6.2.3.6,GSM7312-ROUTING-MIB::agentRouterRipDefaultMetricConfigured,,read-write,,current,,Flag to determine whether RIP default-metric is configured or not.
.1.3.6.1.4.1.4526.1.6.2.3.7,GSM7312-ROUTING-MIB::agentRouterRipDefaultInfoOriginate,,read-write,,current,,Flag to determine, whether RIP can advertise a default-route learned from another protocol.
.1.3.6.1.4.1.4526.1.6.2.3.8,GSM7312-ROUTING-MIB::agentRipRouteRedistTable,,not-accessible,,current,,This table contains the MIB objects required to configure  route-redistribution for RIP. Here, RIP is the Destination protocol and the source protocols can be any of : BGP, OSPF, Static, Connected.
.1.3.6.1.4.1.4526.1.6.2.3.8.1,GSM7312-ROUTING-MIB::agentRipRouteRedistEntry,,not-accessible,agentRipRouteRedistSource,current,,
.1.3.6.1.4.1.4526.1.6.2.3.8.1.1,GSM7312-ROUTING-MIB::agentRipRouteRedistSource,INTEGER,read-only,,current,connected(1):static(2):ospf(3):bgp(4),Source route, from which RIP can redistribute routes. This object also acts as the identifier for the  RIP redistribution Table entry.
.1.3.6.1.4.1.4526.1.6.2.3.8.1.2,GSM7312-ROUTING-MIB::agentRipRouteRedistMode,INTEGER,read-write,,current,enable(1):disable(2),User enabels/disables route-redistribution for a particular source protocol.
.1.3.6.1.4.1.4526.1.6.2.3.8.1.3,GSM7312-ROUTING-MIB::agentRipRouteRedistMetric,Integer32,read-write,,current,,Metric used for redistributing a particular source protocol route into RIP.
.1.3.6.1.4.1.4526.1.6.2.3.8.1.4,GSM7312-ROUTING-MIB::agentRipRouteRedistMetricConfigured,,read-write,,current,,Flag to determine whether RIP redistribute-metric is configured or not.
.1.3.6.1.4.1.4526.1.6.2.3.8.1.5,GSM7312-ROUTING-MIB::agentRipRouteRedistMatchInternal,INTEGER,read-write,,current,true(1):false(2):not-applicable(3),If this flag is true, RIP redistributes OSPF internal routes. It will be non-applicable, when source protocol is other than ospf.
.1.3.6.1.4.1.4526.1.6.2.3.8.1.6,GSM7312-ROUTING-MIB::agentRipRouteRedistMatchExternal1,INTEGER,read-write,,current,true(1):false(2):not-applicable(3),If this flag is true, RIP redistributes OSPF External1 routes. It will be non-applicable, when source protocol is other than ospf.
.1.3.6.1.4.1.4526.1.6.2.3.8.1.7,GSM7312-ROUTING-MIB::agentRipRouteRedistMatchExternal2,INTEGER,read-write,,current,true(1):false(2):not-applicable(3),If this flag is true, RIP redistributes OSPF External2 routes. It will be non-applicable, when source protocol is other than ospf.
.1.3.6.1.4.1.4526.1.6.2.3.8.1.8,GSM7312-ROUTING-MIB::agentRipRouteRedistMatchNSSAExternal1,INTEGER,read-write,,current,true(1):false(2):not-applicable(3),If this flag is true, RIP redistributes OSPF NSSA-External1 routes. It will be non-applicable, when source protocol is other than ospf.
.1.3.6.1.4.1.4526.1.6.2.3.8.1.9,GSM7312-ROUTING-MIB::agentRipRouteRedistMatchNSSAExternal2,INTEGER,read-write,,current,true(1):false(2):not-applicable(3),If this flag is true, RIP redistributes OSPF NSSA-External2 routes. It will be non-applicable, when source protocol is other than ospf.
.1.3.6.1.4.1.4526.1.6.2.3.8.1.10,GSM7312-ROUTING-MIB::agentRipRouteRedistDistList,Unsigned32,read-write,,current,,Access-list number of the access-list, which filters routes received from a source-protocol.
.1.3.6.1.4.1.4526.1.6.2.3.8.1.11,GSM7312-ROUTING-MIB::agentRipRouteRedistDistListConfigured,,read-write,,current,,Flag to determine whether Access-list is configured or not.
.1.3.6.1.4.1.4526.1.6.2.3.9,GSM7312-ROUTING-MIB::agentRip2IfConfTable,,not-accessible,,current,,A list of subnets which require separate configuration in RIP. Augments rip2IfConfTable
.1.3.6.1.4.1.4526.1.6.2.3.9.1,GSM7312-ROUTING-MIB::agentRip2IfConfEntry,,not-accessible,,current,,A Single Routing Domain in a single Subnet.
.1.3.6.1.4.1.4526.1.6.2.3.9.1.1,GSM7312-ROUTING-MIB::agentRip2IfConfAuthKeyId,INTEGER,read-create,,current,,The identifier for the authentication key used on this interface. This field is only meaningful  when the RIPv2-MIB rip2IfConfAuthType is md5(3); 
.1.3.6.1.4.1.4526.1.6.2.4,GSM7312-ROUTING-MIB::agentRouterOspfConfigGroup,,,,,,
.1.3.6.1.4.1.4526.1.6.2.4.1,GSM7312-ROUTING-MIB::agentOspfDefaultMetric,Integer32,read-write,,current,,Default metric of redistributed routes, when OSPF redistributes  from other protocols.
.1.3.6.1.4.1.4526.1.6.2.4.2,GSM7312-ROUTING-MIB::agentOspfDefaultMetricConfigured,,read-write,,current,,Flag to determine whether OSPF default-metric is configured or not.
.1.3.6.1.4.1.4526.1.6.2.4.3,GSM7312-ROUTING-MIB::agentOspfDefaultInfoOriginate,,read-write,,current,,Flag to determine, whether OSPF can advertise a default-route learned from another protocol.
.1.3.6.1.4.1.4526.1.6.2.4.4,GSM7312-ROUTING-MIB::agentOspfDefaultInfoOriginateAlways,,read-write,,current,,When this flag is true, the router advertises 0.0.0.0/0.0.0.0 always. Without this option, OSPF will only advertise 0.0.0.0/0.0.0.0 if the router's forwarding table contains a default route.
.1.3.6.1.4.1.4526.1.6.2.4.5,GSM7312-ROUTING-MIB::agentOspfDefaultInfoOriginateMetric,Integer32,read-write,,current,,Metric of the default route,which OSPF advertises when learned from other protocol.
.1.3.6.1.4.1.4526.1.6.2.4.6,GSM7312-ROUTING-MIB::agentOspfDefaultInfoOriginateMetricConfigured,,read-write,,current,,Flag to determine whether OSPF default-info originate metric  is configured or not.
.1.3.6.1.4.1.4526.1.6.2.4.7,GSM7312-ROUTING-MIB::agentOspfDefaultInfoOriginateMetricType,INTEGER,read-write,,current,externalType1(1):externalType2(2),Metric Type of the default route,which OSPF advertises when learned from other protocol. It can be 1(external type 1) or 2(external type 2).
.1.3.6.1.4.1.4526.1.6.2.4.8,GSM7312-ROUTING-MIB::agentOspfRouteRedistTable,,not-accessible,,current,,This table contains the MIB objects required to configure  route-redistribution for OSPF. Here, OSPF is the Destination protocol and the source protocols can be any of : BGP, RIP, Static, Connected.
.1.3.6.1.4.1.4526.1.6.2.4.8.1,GSM7312-ROUTING-MIB::agentOspfRouteRedistEntry,,not-accessible,agentOspfRouteRedistSource,current,,
.1.3.6.1.4.1.4526.1.6.2.4.8.1.1,GSM7312-ROUTING-MIB::agentOspfRouteRedistSource,INTEGER,read-only,,current,connected(1):static(2):rip(3):bgp(4),Source protocol, from which OSPF can redistribute routes. This object also acts as the identifier for the  OSPF redistribution Table entry.
.1.3.6.1.4.1.4526.1.6.2.4.8.1.2,GSM7312-ROUTING-MIB::agentOspfRouteRedistMode,INTEGER,read-write,,current,enable(1):disable(2),User enabels/disables route-redistribution for a particular source protocol.
.1.3.6.1.4.1.4526.1.6.2.4.8.1.3,GSM7312-ROUTING-MIB::agentOspfRouteRedistMetric,Integer32,read-write,,current,,Metric used for redistributing a particular source protocol route into OSPF.
.1.3.6.1.4.1.4526.1.6.2.4.8.1.4,GSM7312-ROUTING-MIB::agentOspfRouteRedistMetricConfigured,,read-write,,current,,Flag to determine whether OSPF redistribute-metric is configured or not.
.1.3.6.1.4.1.4526.1.6.2.4.8.1.5,GSM7312-ROUTING-MIB::agentOspfRouteRedistMetricType,INTEGER,read-write,,current,externalType1(1):externalType2(2),Metric Type of routes,which OSPF redistributes from other source protocols. It can be 1(external type 1) or 2(external type 2).
.1.3.6.1.4.1.4526.1.6.2.4.8.1.6,GSM7312-ROUTING-MIB::agentOspfRouteRedistTag,Unsigned32,read-write,,current,,It specifies the tag field in routes redistributed by OSPF.
.1.3.6.1.4.1.4526.1.6.2.4.8.1.7,GSM7312-ROUTING-MIB::agentOspfRouteRedistSubnets,,read-write,,current,,If this value is false, then OSPF will not redistribute subnetted routes.
.1.3.6.1.4.1.4526.1.6.2.4.8.1.8,GSM7312-ROUTING-MIB::agentOspfRouteRedistDistList,Unsigned32,read-write,,current,,Access-list number of the access-list, which filters routes received from a source-protocol.
.1.3.6.1.4.1.4526.1.6.2.4.8.1.9,GSM7312-ROUTING-MIB::agentOspfRouteRedistDistListConfigured,,read-write,,current,,Flag to determine whether Access-list is configured or not.
.1.3.6.1.4.1.4526.1.6.2.4.9,GSM7312-ROUTING-MIB::agentOspfIfTable,,not-accessible,,current,,The OSPF Interface Table describes the inter- faces from the viewpoint of OSPF. Augments 
.1.3.6.1.4.1.4526.1.6.2.4.9.1,GSM7312-ROUTING-MIB::agentOspfIfEntry,,not-accessible,,current,,The OSPF Interface Entry describes one inter- face from the viewpoint of OSPF. Augments
.1.3.6.1.4.1.4526.1.6.2.4.9.1.1,GSM7312-ROUTING-MIB::agentOspfIfAuthKeyId,INTEGER,read-create,,current,,The identifier for the authentication key used on this interface. This field is only meaningful  when the OSPF-MIB ospfIfAuthType is md5(2); 
.1.3.6.1.4.1.4526.1.6.2.4.10,GSM7312-ROUTING-MIB::agentOspfVirtIfTable,,not-accessible,,current,,Information about this router's virtual inter- faces. Augments ospfVirtIfTable from the OSPF-MIB.
.1.3.6.1.4.1.4526.1.6.2.4.10.1,GSM7312-ROUTING-MIB::agentOspfVirtIfEntry,,not-accessible,,current,,Information about a single Virtual Interface.
.1.3.6.1.4.1.4526.1.6.2.4.10.1.1,GSM7312-ROUTING-MIB::agentOspfVirtIfAuthKeyId,INTEGER,read-create,,current,,The identifier for the authentication key used on this virtual interface. This field is only meaningful  when the OSPF-MIB ospfVirtIfAuthType is md5(2); 
.1.3.6.1.4.1.4526.1.6.2.4.11,GSM7312-ROUTING-MIB::agentRouterOspfRFC1583CompatibilityMode,INTEGER,read-write,,current,enable(1):disable(2),From RFC2328:  Controls the preference rules used in Section 16.4 when choosing among multiple AS-external-LSAs advertising the same destination. When set to 'enabled', the preference rules remain those specified by RFC 1583 ([Ref9]). When set to 'disabled', the preference rules are those stated in Section 16.4.1, which prevent routing loops when AS- external-LSAs for the same destination have been originated from different areas. Set to 'enabled' by default. In order to minimize the chance of routing loops, all OSPF routers in an OSPF routing domain should have RFC1583Compatibility set identically. When there are routers present that have not been updated with the functionality specified in Section 16.4.1 of this memo, all routers should have RFC1583Compatibility set to 'enabled'. Otherwise, all routers should have RFC1583Compatibility set to 'disabled', preventing all routing loops.
.1.3.6.1.4.1.4526.1.6.2.4.12,GSM7312-ROUTING-MIB::agentOspfAreaTable,,not-accessible,,current,,Information describing the additional configured  parameters and cumulative statistics of the router's attached areas.
.1.3.6.1.4.1.4526.1.6.2.4.12.1,GSM7312-ROUTING-MIB::agentOspfAreaEntry,,not-accessible,,current,,Information describing the additional configured  parameters and cumulative statistics of the router's attached areas.
.1.3.6.1.4.1.4526.1.6.2.4.12.1.2,GSM7312-ROUTING-MIB::agentOspfAuthType,Integer32,read-write,,current,,The authentication type specified for an area. Additional authentication types may be assigned locally on a per Area basis.
.1.3.6.1.4.1.4526.1.6.2.5,GSM7312-ROUTING-MIB::agentSnmpTrapFlagsConfigGroupLayer3,,,,,,
.1.3.6.1.4.1.4526.1.6.2.5.1,GSM7312-ROUTING-MIB::agentSnmpVRRPNewMasterTrapFlag,INTEGER,read-write,,current,enable(1):disable(2),This flag enables the sending of VRRP new master notification traps.
.1.3.6.1.4.1.4526.1.6.2.5.2,GSM7312-ROUTING-MIB::agentSnmpVRRPAuthFailureTrapFlag,INTEGER,read-write,,current,enable(1):disable(2),This flag enables the sending of VRRP authentication failure notification traps.
.1.3.6.1.4.1.4526.1.6.2.6,GSM7312-ROUTING-MIB::agentBootpDhcpRelayGroup,,,,,,
.1.3.6.1.4.1.4526.1.6.2.6.1,GSM7312-ROUTING-MIB::agentBootpDhcpRelayMaxHopCount,Integer32,read-write,,current,,The BOOTP/DHCP Max Hop Count. The relay agent silently discards BOOTREQUEST messages whose hops field exceeds the value 16  assuming that the request is looped through the intermediate agents. The default value is 4.
.1.3.6.1.4.1.4526.1.6.2.6.2,GSM7312-ROUTING-MIB::agentBootpDhcpRelayForwardingIp,IpAddress,read-write,,current,,The BOOTP/DHCP Server IP Address.  All the requests will be forwarded and the replies expected from this address.
.1.3.6.1.4.1.4526.1.6.2.6.3,GSM7312-ROUTING-MIB::agentBootpDhcpRelayForwardMode,INTEGER,read-write,,current,enable(1):disable(2),The BOOTP/DHCP Admin Mode.  The relaying functionality can be administratively enabled or disabled by this object
.1.3.6.1.4.1.4526.1.6.2.6.4,GSM7312-ROUTING-MIB::agentBootpDhcpRelayMinWaitTime,Integer32,read-write,,current,,The BOOTP/DHCP Minimum Wait Time.  When the BOOTP relay agent receives a BOOTREQUEST message, it MAY use the value of the 'secs'  (seconds since client began booting) field of the request as a factor in deciding whether to  relay the request or not.
.1.3.6.1.4.1.4526.1.6.2.6.5,GSM7312-ROUTING-MIB::agentBootpDhcpRelayCircuitIdOptionMode,INTEGER,read-write,,current,enable(1):disable(2),The BOOTP/DHCP Circuit ID Option Mode.  This flag is set to enable/disable the network element to add/remove the DHCP Relay agent Circuit ID sub-options.
.1.3.6.1.4.1.4526.1.6.2.6.6,GSM7312-ROUTING-MIB::agentBootpDhcpRelayNumOfRequestsReceived,Integer32,read-only,,current,,The Number of BOOTP/DHCP Requests Received.  Total number of BOOTREQUESTs received from all clients.
.1.3.6.1.4.1.4526.1.6.2.6.7,GSM7312-ROUTING-MIB::agentBootpDhcpRelayNumOfRequestsForwarded,Integer32,read-only,,current,,The Number of BOOTP/DHCP Requests Forwarded.  Total number of BOOTREQUESTs forwarded to the next agents/servers.
.1.3.6.1.4.1.4526.1.6.2.6.8,GSM7312-ROUTING-MIB::agentBootpDhcpRelayNumOfDiscards,Integer32,read-only,,current,,The Number of BOOTP/DHCP Discards.  Total number of packets discarded by the network element because of error in the packet.
.1.3.6.1.4.1.4526.1.6.3,GSM7312-QOS-MIB::gsm7312QOS,,,,,,
.1.3.6.1.4.1.4526.1.6.3.2,GSM7312-QOS-ACL-MIB::gsm7312QOSACL,,,,,,
.1.3.6.1.4.1.4526.1.6.3.2.1,GSM7312-QOS-ACL-MIB::aclTable,,not-accessible,,current,,A table of ACL instances.
.1.3.6.1.4.1.4526.1.6.3.2.1.1,GSM7312-QOS-ACL-MIB::aclEntry,,not-accessible,aclIndex,current,,
.1.3.6.1.4.1.4526.1.6.3.2.1.1.1,GSM7312-QOS-ACL-MIB::aclIndex,Integer32,not-accessible,,current,,The ACL index this instance is associated with.
.1.3.6.1.4.1.4526.1.6.3.2.1.1.3,GSM7312-QOS-ACL-MIB::aclStatus,INTEGER,read-create,,current,active(1):notInService(2):notReady(3):createAndGo(4):createAndWait(5):destroy(6),Status of this instance.  active(1) - this ACL instance is active createAndGo(4) - set to this value to create an instance destroy(6) - set to this value to delete an instance
.1.3.6.1.4.1.4526.1.6.3.2.2,GSM7312-QOS-ACL-MIB::aclIfTable,,not-accessible,,current,,A table of ACL interface instances.
.1.3.6.1.4.1.4526.1.6.3.2.2.1,GSM7312-QOS-ACL-MIB::aclIfEntry,,not-accessible,aclIndex:aclIfIndex:aclIfDirection,current,,
.1.3.6.1.4.1.4526.1.6.3.2.2.1.1,GSM7312-QOS-ACL-MIB::aclIfIndex,Integer32,not-accessible,,current,,The interface this ACL instance is associated with.
.1.3.6.1.4.1.4526.1.6.3.2.2.1.2,GSM7312-QOS-ACL-MIB::aclIfDirection,INTEGER,not-accessible,,current,inbound(1):outbound(2),The direction this ACL instance applies.
.1.3.6.1.4.1.4526.1.6.3.2.2.1.3,GSM7312-QOS-ACL-MIB::aclIfStatus,INTEGER,read-create,,current,active(1):notInService(2):notReady(3):createAndGo(4):createAndWait(5):destroy(6),Status of this instance.  active(1) - this ACL index instance is active createAndGo(4) - set to this value to assign an interface to an ACL destroy(6) - set to this value to remove an interface to an ACL
.1.3.6.1.4.1.4526.1.6.3.2.3,GSM7312-QOS-ACL-MIB::aclRuleTable,,not-accessible,,current,,A table of ACL Rules instances.
.1.3.6.1.4.1.4526.1.6.3.2.3.1,GSM7312-QOS-ACL-MIB::aclRuleEntry,,not-accessible,aclIndex:aclRuleIndex,current,,A table of ACL Classification Rules
.1.3.6.1.4.1.4526.1.6.3.2.3.1.1,GSM7312-QOS-ACL-MIB::aclRuleIndex,Integer32,not-accessible,,current,,The index of this instance.
.1.3.6.1.4.1.4526.1.6.3.2.3.1.2,GSM7312-QOS-ACL-MIB::aclRuleAction,INTEGER,read-create,,current,permit(1):deny(2),The type of action this rule should perform.
.1.3.6.1.4.1.4526.1.6.3.2.3.1.3,GSM7312-QOS-ACL-MIB::aclRuleProtocol,Integer32,read-create,,current,,icmp - 1 igmp - 2 ip - 4 tcp - 6 udp - 17 All values from 1 to 255 are valid.
.1.3.6.1.4.1.4526.1.6.3.2.3.1.4,GSM7312-QOS-ACL-MIB::aclRuleSrcIpAddress,IpAddress,read-create,,current,,The Source IP Address used in the ACL Classification.
.1.3.6.1.4.1.4526.1.6.3.2.3.1.5,GSM7312-QOS-ACL-MIB::aclRuleSrcIpMask,IpAddress,read-create,,current,,The Source IP Mask used in the ACL Classification.
.1.3.6.1.4.1.4526.1.6.3.2.3.1.6,GSM7312-QOS-ACL-MIB::aclRuleSrcL4Port,Integer32,read-create,,current,,The Source Port Number (Layer 4) used in the ACL Classification.
.1.3.6.1.4.1.4526.1.6.3.2.3.1.7,GSM7312-QOS-ACL-MIB::aclRuleSrcL4PortRangeStart,Integer32,read-create,,current,,The Source Port Number(Layer 4) range start.
.1.3.6.1.4.1.4526.1.6.3.2.3.1.8,GSM7312-QOS-ACL-MIB::aclRuleSrcL4PortRangeEnd,Integer32,read-create,,current,,The Source Port Number(Layer 4) range end.
.1.3.6.1.4.1.4526.1.6.3.2.3.1.9,GSM7312-QOS-ACL-MIB::aclRuleDestIpAddress,IpAddress,read-create,,current,,The Destination IP Address used in the ACL Classification.
.1.3.6.1.4.1.4526.1.6.3.2.3.1.10,GSM7312-QOS-ACL-MIB::aclRuleDestIpMask,IpAddress,read-create,,current,,The Destination IP Mask used in the ACL Classification.
.1.3.6.1.4.1.4526.1.6.3.2.3.1.11,GSM7312-QOS-ACL-MIB::aclRuleDestL4Port,Integer32,read-create,,current,,The Destination Port (Layer 4) used in ACl classification.
.1.3.6.1.4.1.4526.1.6.3.2.3.1.12,GSM7312-QOS-ACL-MIB::aclRuleDestL4PortRangeStart,Integer32,read-create,,current,,The Destination Port (Layer 4) starting range used in ACL classification.
.1.3.6.1.4.1.4526.1.6.3.2.3.1.13,GSM7312-QOS-ACL-MIB::aclRuleDestL4PortRangeEnd,Integer32,read-create,,current,,The Destination Port (Layer 4) ending range used in ACL classification.
.1.3.6.1.4.1.4526.1.6.3.2.3.1.14,GSM7312-QOS-ACL-MIB::aclRuleIPDSCP,Integer32,read-create,,current,,The Differentiated Services Code Point value.
.1.3.6.1.4.1.4526.1.6.3.2.3.1.15,GSM7312-QOS-ACL-MIB::aclRuleIpPrecedence,Integer32,read-create,,current,,The Type of Service (TOS) IP Precedence value.
.1.3.6.1.4.1.4526.1.6.3.2.3.1.16,GSM7312-QOS-ACL-MIB::aclRuleIpTosBits,Integer32,read-create,,current,,The Type of Service (TOS) Bits value.
.1.3.6.1.4.1.4526.1.6.3.2.3.1.17,GSM7312-QOS-ACL-MIB::aclRuleIpTosMask,Integer32,read-create,,current,,The Type of Service (TOS) Mask value.
.1.3.6.1.4.1.4526.1.6.3.2.3.1.18,GSM7312-QOS-ACL-MIB::aclRuleStatus,INTEGER,read-create,,current,active(1):notInService(2):notReady(3):createAndGo(4):createAndWait(5):destroy(6),Status of this instance.  active(1) - this ACL Rule is active createAndGo(4) - set to this value to create an instance destroy(6) - set to this value to delete an instance
.1.3.6.1.4.1.4526.1.6.3.3,GSM7312-QOS-DIFFSERV-EXTENSIONS-MIB::gsm7312QOSDiffServExtensions,,,,,,
.1.3.6.1.4.1.4526.1.6.3.3.1,GSM7312-QOS-DIFFSERV-EXTENSIONS-MIB::agentDiffServMIBObjects,,,,,,
.1.3.6.1.4.1.4526.1.6.3.3.1.1,GSM7312-QOS-DIFFSERV-EXTENSIONS-MIB::agentDiffServClassifier,,,,,,
.1.3.6.1.4.1.4526.1.6.3.3.1.1.1,GSM7312-QOS-DIFFSERV-EXTENSIONS-MIB::agentDiffServAuxMfClfrNextFree,Unsigned32,read-only,,current,,This object contains an unused value for agentDiffServAuxMfClfrId , or a zero to indicate that none exist.
.1.3.6.1.4.1.4526.1.6.3.3.1.1.2,GSM7312-QOS-DIFFSERV-EXTENSIONS-MIB::agentDiffServAuxMfClfrTable,,not-accessible,,current,,A table of Auxiliary Multi-field Classifier filter entries that a system may use to identify IP traffic.
.1.3.6.1.4.1.4526.1.6.3.3.1.1.2.1,GSM7312-QOS-DIFFSERV-EXTENSIONS-MIB::agentDiffServAuxMfClfrEntry,,not-accessible,agentDiffServAuxMfClfrId,current,,An IP Multi-field Classifier entry describes a single filter.
.1.3.6.1.4.1.4526.1.6.3.3.1.1.2.1.1,GSM7312-QOS-DIFFSERV-EXTENSIONS-MIB::agentDiffServAuxMfClfrId,Unsigned32,not-accessible,,current,,An index that enumerates the Auxiliary MultiField Classifier filter entries. Managers obtain new values for row creation in this table by reading agentDiffServAuxMfClfrNextFree.
.1.3.6.1.4.1.4526.1.6.3.3.1.1.2.1.2,GSM7312-QOS-DIFFSERV-EXTENSIONS-MIB::agentDiffServAuxMfClfrDstAddr,IpAddress,read-create,,current,,The IP address to match against the packet's destination IP address.
.1.3.6.1.4.1.4526.1.6.3.3.1.1.2.1.3,GSM7312-QOS-DIFFSERV-EXTENSIONS-MIB::agentDiffServAuxMfClfrDstMask,IpAddress,read-create,,current,,This mask value identifies the portion of agentDiffServAuxMfClfrDstAddr that is compared against a packet. 
.1.3.6.1.4.1.4526.1.6.3.3.1.1.2.1.4,GSM7312-QOS-DIFFSERV-EXTENSIONS-MIB::agentDiffServAuxMfClfrSrcAddr,IpAddress,read-create,,current,,The IP address to match against the packet's source IP address.
.1.3.6.1.4.1.4526.1.6.3.3.1.1.2.1.5,GSM7312-QOS-DIFFSERV-EXTENSIONS-MIB::agentDiffServAuxMfClfrSrcMask,IpAddress,read-create,,current,,This mask value identifies the portion of agentDiffServAuxMfClfrSrcAddr that is compared against a packet. 
.1.3.6.1.4.1.4526.1.6.3.3.1.1.2.1.6,GSM7312-QOS-DIFFSERV-EXTENSIONS-MIB::agentDiffServAuxMfClfrProtocol,Unsigned32,read-create,,current,,The IP protocol to match against the IPv4 protocol number. A value of 255 means match all. 
.1.3.6.1.4.1.4526.1.6.3.3.1.1.2.1.7,GSM7312-QOS-DIFFSERV-EXTENSIONS-MIB::agentDiffServAuxMfClfrDstL4PortMin,Unsigned32,read-create,,current,,The minimum value that the layer-4 destination port number in the packet must have in order to match this classifier entry. 
.1.3.6.1.4.1.4526.1.6.3.3.1.1.2.1.8,GSM7312-QOS-DIFFSERV-EXTENSIONS-MIB::agentDiffServAuxMfClfrDstL4PortMax,Unsigned32,read-create,,current,,The maximum value that the layer-4 destination port number in the  packet must have in order to match this classifier entry.  for this entry in agentDiffServAuxMfClfrDstL4PortMin. 
.1.3.6.1.4.1.4526.1.6.3.3.1.1.2.1.9,GSM7312-QOS-DIFFSERV-EXTENSIONS-MIB::agentDiffServAuxMfClfrSrcL4PortMin,Unsigned32,read-create,,current,,The minimum value that the layer-4 source port number in the packet must have in order to match this classifier entry. 
.1.3.6.1.4.1.4526.1.6.3.3.1.1.2.1.10,GSM7312-QOS-DIFFSERV-EXTENSIONS-MIB::agentDiffServAuxMfClfrSrcL4PortMax,Unsigned32,read-create,,current,,The maximum value that the layer-4 source port number in the packet must have in order to match this classifier entry. This value must be equal to or greater than the value specified for this entry in diffServMultiFieldClfrSrcL4PortMin. 
.1.3.6.1.4.1.4526.1.6.3.3.1.1.2.1.11,GSM7312-QOS-DIFFSERV-EXTENSIONS-MIB::agentDiffServAuxMfClfrCos,Integer32,read-create,,current,,Three-bit 802.1p priority field in the Ethernet frame used as
.1.3.6.1.4.1.4526.1.6.3.3.1.1.2.1.12,GSM7312-QOS-DIFFSERV-EXTENSIONS-MIB::agentDiffServAuxMfClfrTos,OCTET,read-create,,current,,IP TOS bits value, defined as all eight bits of the Service  Type octet in the IPv4 header. There are multiple, overlapping,  Precedence (bits 7-5): IP Precedence, values 0-7
.1.3.6.1.4.1.4526.1.6.3.3.1.1.2.1.13,GSM7312-QOS-DIFFSERV-EXTENSIONS-MIB::agentDiffServAuxMfClfrTosMask,OCTET,read-create,,current,,IP TOS bits mask value. It identifies the portion of  agentDiffServAuxMfClfrTos that is compared against a packet.  There are multiple, overlapping meanings of the TOS octet in use today. Precedence (bits 7-5): 224 (bit mask '11100000') Other mask values are also permitted.
.1.3.6.1.4.1.4526.1.6.3.3.1.1.2.1.14,GSM7312-QOS-DIFFSERV-EXTENSIONS-MIB::agentDiffServAuxMfClfrDstMac,OCTET,read-create,,current,,Destination MAC address. 
.1.3.6.1.4.1.4526.1.6.3.3.1.1.2.1.15,GSM7312-QOS-DIFFSERV-EXTENSIONS-MIB::agentDiffServAuxMfClfrDstMacMask,OCTET,read-create,,current,,Destination MAC address mask value. This mask value identifies the portion of agentDiffServAuxMfClfrDstMac 
.1.3.6.1.4.1.4526.1.6.3.3.1.1.2.1.16,GSM7312-QOS-DIFFSERV-EXTENSIONS-MIB::agentDiffServAuxMfClfrSrcMac,OCTET,read-create,,current,,Source MAC address. 
.1.3.6.1.4.1.4526.1.6.3.3.1.1.2.1.17,GSM7312-QOS-DIFFSERV-EXTENSIONS-MIB::agentDiffServAuxMfClfrSrcMacMask,OCTET,read-create,,current,,Source MAC address mask value. This mask value identifies the portion of agentDiffServAuxMfClfrSrcMac 
.1.3.6.1.4.1.4526.1.6.3.3.1.1.2.1.18,GSM7312-QOS-DIFFSERV-EXTENSIONS-MIB::agentDiffServAuxMfClfrVlanId,Integer32,read-create,,current,,VLAN ID value for the classifier. A value of -1 indicates that  a specific VLAN ID value has not been defined and thus all  VLAN ID values are considered a match.
.1.3.6.1.4.1.4526.1.6.3.3.1.1.2.1.19,GSM7312-QOS-DIFFSERV-EXTENSIONS-MIB::agentDiffServAuxMfClfrStorage,INTEGER,read-create,,current,other(1):volatile(2):nonVolatile(3):permanent(4):readOnly(5),The storage type for this conceptual row. 
.1.3.6.1.4.1.4526.1.6.3.3.1.1.2.1.20,GSM7312-QOS-DIFFSERV-EXTENSIONS-MIB::agentDiffServAuxMfClfrStatus,INTEGER,read-create,,current,active(1):notInService(2):notReady(3):createAndGo(4):createAndWait(5):destroy(6),The status of this conceptual row.
.1.3.6.1.4.1.4526.1.6.3.3.1.2,GSM7312-QOS-DIFFSERV-EXTENSIONS-MIB::agentDiffServAction,,,,,,
.1.3.6.1.4.1.4526.1.6.3.3.1.2.2,GSM7312-QOS-DIFFSERV-EXTENSIONS-MIB::agentDiffServCosMarkActTable,,not-accessible,,current,,This table enumerates specific Class of Service values used for marking or remarking the priority bits in the 802.1p header. The entries of this  table may be referenced by a diffServActionSpecific attribute.
.1.3.6.1.4.1.4526.1.6.3.3.1.2.2.1,GSM7312-QOS-DIFFSERV-EXTENSIONS-MIB::agentDiffServCosMarkActEntry,,not-accessible,agentDiffServCosMarkActCos,current,,An entry in the COS mark action table that describes a single Class of Service value used for marking.
.1.3.6.1.4.1.4526.1.6.3.3.1.2.2.1.1,GSM7312-QOS-DIFFSERV-EXTENSIONS-MIB::agentDiffServCosMarkActCos,Integer32,read-only,,current,,The Class of Service value that this Action will store into the priority bits of the 802.1p header. It is quite possible that the  only packets subject to this Action are already marked with this COS  value. COS packet marking occurs upon egress from the network node.
.1.3.6.1.4.1.4526.1.6.3.3.1.2.4,GSM7312-QOS-DIFFSERV-EXTENSIONS-MIB::agentDiffServIpPrecMarkActTable,,not-accessible,,current,,This table enumerates specific IP Precedence values used for marking or remarking the Precedence field of IP packets. The entries of this  table may be referenced by a diffServActionSpecific attribute.
.1.3.6.1.4.1.4526.1.6.3.3.1.2.4.1,GSM7312-QOS-DIFFSERV-EXTENSIONS-MIB::agentDiffServIpPrecMarkActEntry,,not-accessible,agentDiffServIpPrecMarkActPrecedence,current,,An entry in the IP Precedence mark action table that describes a single IP Precedence value used for marking.
.1.3.6.1.4.1.4526.1.6.3.3.1.2.4.1.1,GSM7312-QOS-DIFFSERV-EXTENSIONS-MIB::agentDiffServIpPrecMarkActPrecedence,Integer32,read-only,,current,,The IP Precedence that this Action will store into the Precedence field of the IP packet. It is quite possible that the only packets  subject to this Action are already marked with this IP Precedence.  Note also that Differentiated Services processing may result in a packet being marked on both ingress to a network and on egress from  it, and that ingress and egress can occur in the same router.
.1.3.6.1.4.1.4526.1.6.3.4,GSM7312-QOS-DIFFSERV-PRIVATE-MIB::gsm7312QOSDiffServPrivate,,,,,,
.1.3.6.1.4.1.4526.1.6.3.4.1,GSM7312-QOS-DIFFSERV-PRIVATE-MIB::agentDiffServGenStatusGroup,,,,,,
.1.3.6.1.4.1.4526.1.6.3.4.1.1,GSM7312-QOS-DIFFSERV-PRIVATE-MIB::agentDiffServGenStatusAdminMode,INTEGER,read-write,,current,enable(1):disable(2), DiffServ Admin Mode
.1.3.6.1.4.1.4526.1.6.3.4.1.2,GSM7312-QOS-DIFFSERV-PRIVATE-MIB::agentDiffServGenStatusClassTableSize,Unsigned32,read-only,,current,, Current size of the Class Table
.1.3.6.1.4.1.4526.1.6.3.4.1.3,GSM7312-QOS-DIFFSERV-PRIVATE-MIB::agentDiffServGenStatusClassTableMax,Unsigned32,read-only,,current,, Max size of the Class Table
.1.3.6.1.4.1.4526.1.6.3.4.1.4,GSM7312-QOS-DIFFSERV-PRIVATE-MIB::agentDiffServGenStatusClassRuleTableSize,Unsigned32,read-only,,current,, Current size of Class Rule Table
.1.3.6.1.4.1.4526.1.6.3.4.1.5,GSM7312-QOS-DIFFSERV-PRIVATE-MIB::agentDiffServGenStatusClassRuleTableMax,Unsigned32,read-only,,current,, Max size of the Class Rule Table.
.1.3.6.1.4.1.4526.1.6.3.4.1.6,GSM7312-QOS-DIFFSERV-PRIVATE-MIB::agentDiffServGenStatusPolicyTableSize,Unsigned32,read-only,,current,, Current Size of the Policy Table.
.1.3.6.1.4.1.4526.1.6.3.4.1.7,GSM7312-QOS-DIFFSERV-PRIVATE-MIB::agentDiffServGenStatusPolicyTableMax,Unsigned32,read-only,,current,, Max size of the Policy Table
.1.3.6.1.4.1.4526.1.6.3.4.1.8,GSM7312-QOS-DIFFSERV-PRIVATE-MIB::agentDiffServGenStatusPolicyInstTableSize,Unsigned32,read-only,,current,, Current size of the Policy-Class Instance Table
.1.3.6.1.4.1.4526.1.6.3.4.1.9,GSM7312-QOS-DIFFSERV-PRIVATE-MIB::agentDiffServGenStatusPolicyInstTableMax,Unsigned32,read-only,,current,, Max size of the Policy-Class Instance Table
.1.3.6.1.4.1.4526.1.6.3.4.1.10,GSM7312-QOS-DIFFSERV-PRIVATE-MIB::agentDiffServGenStatusPolicyAttrTableSize,Unsigned32,read-only,,current,, Current size of the Policy Attribute Table
.1.3.6.1.4.1.4526.1.6.3.4.1.11,GSM7312-QOS-DIFFSERV-PRIVATE-MIB::agentDiffServGenStatusPolicyAttrTableMax,Unsigned32,read-only,,current,, Max size of the Policy Attribute Table
.1.3.6.1.4.1.4526.1.6.3.4.1.12,GSM7312-QOS-DIFFSERV-PRIVATE-MIB::agentDiffServGenStatusServiceTableSize,Unsigned32,read-only,,current,, Current size of the Service Table
.1.3.6.1.4.1.4526.1.6.3.4.1.13,GSM7312-QOS-DIFFSERV-PRIVATE-MIB::agentDiffServGenStatusServiceTableMax,Unsigned32,read-only,,current,, Max size of the Service Table
.1.3.6.1.4.1.4526.1.6.3.4.2,GSM7312-QOS-DIFFSERV-PRIVATE-MIB::agentDiffServClassGroup,,,,,,
.1.3.6.1.4.1.4526.1.6.3.4.2.1,GSM7312-QOS-DIFFSERV-PRIVATE-MIB::agentDiffServClassIndexNextFree,Unsigned32,read-only,,current,,This object contains an unused value for classIndex, or a
.1.3.6.1.4.1.4526.1.6.3.4.2.2,GSM7312-QOS-DIFFSERV-PRIVATE-MIB::agentDiffServClassTable,,not-accessible,,current,,A table of the DiffServ class entries
.1.3.6.1.4.1.4526.1.6.3.4.2.2.1,GSM7312-QOS-DIFFSERV-PRIVATE-MIB::agentDiffServClassEntry,,not-accessible,agentDiffServClassIndex,current,,Represents entry for a DiffServ traffic class
.1.3.6.1.4.1.4526.1.6.3.4.2.2.1.1,GSM7312-QOS-DIFFSERV-PRIVATE-MIB::agentDiffServClassIndex,Unsigned32,not-accessible,,current,,The identifier for DiffServ Class entry 
.1.3.6.1.4.1.4526.1.6.3.4.2.2.1.2,GSM7312-QOS-DIFFSERV-PRIVATE-MIB::agentDiffServClassName,OCTET,read-create,,current,,Name of the DiffServ traffic class
.1.3.6.1.4.1.4526.1.6.3.4.2.2.1.3,GSM7312-QOS-DIFFSERV-PRIVATE-MIB::agentDiffServClassType,INTEGER,read-create,,current,all(1):any(2):acl(3),The class type indicates how the individual class match 
.1.3.6.1.4.1.4526.1.6.3.4.2.2.1.4,GSM7312-QOS-DIFFSERV-PRIVATE-MIB::agentDiffServClassAclNum,Unsigned32,read-create,,current,,The access list number used to define the match conditions for the  DiffServ class.
.1.3.6.1.4.1.4526.1.6.3.4.2.2.1.5,GSM7312-QOS-DIFFSERV-PRIVATE-MIB::agentDiffServClassRuleIndexNextFree,Unsigned32,read-only,,current,,This object contains an unused value for classRuleIndex, or a
.1.3.6.1.4.1.4526.1.6.3.4.2.2.1.6,GSM7312-QOS-DIFFSERV-PRIVATE-MIB::agentDiffServClassStorageType,INTEGER,read-create,,current,other(1):volatile(2):nonVolatile(3):permanent(4):readOnly(5),Storage-type for this conceptual row
.1.3.6.1.4.1.4526.1.6.3.4.2.2.1.7,GSM7312-QOS-DIFFSERV-PRIVATE-MIB::agentDiffServClassRowStatus,INTEGER,read-create,,current,active(1):notInService(2):notReady(3):createAndGo(4):createAndWait(5):destroy(6),The status of this conceptual row.
.1.3.6.1.4.1.4526.1.6.3.4.2.3,GSM7312-QOS-DIFFSERV-PRIVATE-MIB::agentDiffServClassRuleTable,,not-accessible,,current,,A table of the DiffServ Class Rule entries
.1.3.6.1.4.1.4526.1.6.3.4.2.3.1,GSM7312-QOS-DIFFSERV-PRIVATE-MIB::agentDiffServClassRuleEntry,,not-accessible,agentDiffServClassIndex:agentDiffServClassRuleIndex,current,,Represents entry for a set of class-match rules
.1.3.6.1.4.1.4526.1.6.3.4.2.3.1.1,GSM7312-QOS-DIFFSERV-PRIVATE-MIB::agentDiffServClassRuleIndex,Unsigned32,not-accessible,,current,,The identifier for DiffServ Class Rule Table entry within a class
.1.3.6.1.4.1.4526.1.6.3.4.2.3.1.2,GSM7312-QOS-DIFFSERV-PRIVATE-MIB::agentDiffServClassRuleMatchEntryType,INTEGER,read-create,,current,cos(1):dstip(2):dstl4port(3):dstmac(4):every(5):ipdscp(6):ipprecedence(7):iptos(8):protocol(9):refclass(10):srcip(11):srcl4port(12):srcmac(13):vlan(14),Class Rule match entry type, it determines which one of the individual  match conditions is defined for the present class rule. This object must be created before any other match object in this row.
.1.3.6.1.4.1.4526.1.6.3.4.2.3.1.3,GSM7312-QOS-DIFFSERV-PRIVATE-MIB::agentDiffServClassRuleMatchCos,Unsigned32,read-create,,current,,Three-bit 802.1p priority field in the Ethernet frame used as agentDiffServClassRuleMatchEntryType is set to cos(1).
.1.3.6.1.4.1.4526.1.6.3.4.2.3.1.4,GSM7312-QOS-DIFFSERV-PRIVATE-MIB::agentDiffServClassRuleMatchDstIpAddr,IpAddress,read-create,,current,,Destination IP address match value for the class - only valid if the 
.1.3.6.1.4.1.4526.1.6.3.4.2.3.1.5,GSM7312-QOS-DIFFSERV-PRIVATE-MIB::agentDiffServClassRuleMatchDstIpMask,IpAddress,read-create,,current,,Destination IP address mask match value for the class - only valid if the  compared against a packet. A non-contiguous mask value is permitted.
.1.3.6.1.4.1.4526.1.6.3.4.2.3.1.6,GSM7312-QOS-DIFFSERV-PRIVATE-MIB::agentDiffServClassRuleMatchDstL4PortStart,Unsigned32,read-create,,current,,Destination layer 4 port range start match value for the class - only  valid if the agentDiffServClassRuleMatchEntryType is set to dstl4port(3).
.1.3.6.1.4.1.4526.1.6.3.4.2.3.1.7,GSM7312-QOS-DIFFSERV-PRIVATE-MIB::agentDiffServClassRuleMatchDstL4PortEnd,Unsigned32,read-create,,current,,Destination layer 4 port range end match value for the class - only valid if the agentDiffServClassRuleMatchEntryType is set to dstl4port(3).
.1.3.6.1.4.1.4526.1.6.3.4.2.3.1.8,GSM7312-QOS-DIFFSERV-PRIVATE-MIB::agentDiffServClassRuleMatchDstMacAddr,OCTET,read-create,,current,,Destination MAC address match value for the class - only valid if the 
.1.3.6.1.4.1.4526.1.6.3.4.2.3.1.9,GSM7312-QOS-DIFFSERV-PRIVATE-MIB::agentDiffServClassRuleMatchDstMacMask,OCTET,read-create,,current,,Destination MAC address mask match value for the class - only valid if the  compared against a packet. A non-contiguous mask value is permitted.
.1.3.6.1.4.1.4526.1.6.3.4.2.3.1.10,GSM7312-QOS-DIFFSERV-PRIVATE-MIB::agentDiffServClassRuleMatchEvery,INTEGER,read-only,,current,true(1):false(2),Flag to indicate that the class rule is defined to match on every packet,  regardless of content. - only valid if the  agentDiffServClassRuleMatchEntryType is set to every(5).
.1.3.6.1.4.1.4526.1.6.3.4.2.3.1.11,GSM7312-QOS-DIFFSERV-PRIVATE-MIB::agentDiffServClassRuleMatchIpDscp,Unsigned32,read-create,,current,,IP DiffServ Code Point (DSCP) match value for the class - only valid if  the agentDiffServClassRuleMatchEntryType is set to ipdscp(6). The DSCP  IPv4 header.
.1.3.6.1.4.1.4526.1.6.3.4.2.3.1.12,GSM7312-QOS-DIFFSERV-PRIVATE-MIB::agentDiffServClassRuleMatchIpPrecedence,Unsigned32,read-create,,current,,IP Precedence match value for the class - only valid if the 
.1.3.6.1.4.1.4526.1.6.3.4.2.3.1.13,GSM7312-QOS-DIFFSERV-PRIVATE-MIB::agentDiffServClassRuleMatchIpTosBits,OCTET,read-create,,current,,IP TOS bits match value for the class - only valid if the 
.1.3.6.1.4.1.4526.1.6.3.4.2.3.1.14,GSM7312-QOS-DIFFSERV-PRIVATE-MIB::agentDiffServClassRuleMatchIpTosMask,OCTET,read-create,,current,,IP TOS bits mask match value for the class - only valid if the 
.1.3.6.1.4.1.4526.1.6.3.4.2.3.1.15,GSM7312-QOS-DIFFSERV-PRIVATE-MIB::agentDiffServClassRuleMatchProtocolNum,Unsigned32,read-create,,current,,Protocol number match value for the class - only valid if the 
.1.3.6.1.4.1.4526.1.6.3.4.2.3.1.16,GSM7312-QOS-DIFFSERV-PRIVATE-MIB::agentDiffServClassRuleMatchRefClassIndex,Unsigned32,read-create,,current,,Index of the corresponding referenced class - only valid if the 
.1.3.6.1.4.1.4526.1.6.3.4.2.3.1.17,GSM7312-QOS-DIFFSERV-PRIVATE-MIB::agentDiffServClassRuleMatchSrcIpAddr,IpAddress,read-create,,current,,Source IP address match value for the class - only valid if the 
.1.3.6.1.4.1.4526.1.6.3.4.2.3.1.18,GSM7312-QOS-DIFFSERV-PRIVATE-MIB::agentDiffServClassRuleMatchSrcIpMask,IpAddress,read-create,,current,,Source IP address mask match value for the class - only valid if the 
.1.3.6.1.4.1.4526.1.6.3.4.2.3.1.19,GSM7312-QOS-DIFFSERV-PRIVATE-MIB::agentDiffServClassRuleMatchSrcL4PortStart,Unsigned32,read-create,,current,,Source layer 4 port range start match value for the class - only valid if  the agentDiffServClassRuleMatchEntryType is set to srcl4port(12).
.1.3.6.1.4.1.4526.1.6.3.4.2.3.1.20,GSM7312-QOS-DIFFSERV-PRIVATE-MIB::agentDiffServClassRuleMatchSrcL4PortEnd,Unsigned32,read-create,,current,,Source layer 4 port range end match value for the class - only valid if  the agentDiffServClassRuleMatchEntryType is set to srcl4port(12).
.1.3.6.1.4.1.4526.1.6.3.4.2.3.1.21,GSM7312-QOS-DIFFSERV-PRIVATE-MIB::agentDiffServClassRuleMatchSrcMacAddr,OCTET,read-create,,current,,Source MAC address match value for the class - only valid if the 
.1.3.6.1.4.1.4526.1.6.3.4.2.3.1.22,GSM7312-QOS-DIFFSERV-PRIVATE-MIB::agentDiffServClassRuleMatchSrcMacMask,OCTET,read-create,,current,,Source MAC address mask match value for the class - only valid if the 
.1.3.6.1.4.1.4526.1.6.3.4.2.3.1.23,GSM7312-QOS-DIFFSERV-PRIVATE-MIB::agentDiffServClassRuleMatchVlanId,Unsigned32,read-create,,current,,VLAN ID match value for the class - only valid if the 
.1.3.6.1.4.1.4526.1.6.3.4.2.3.1.24,GSM7312-QOS-DIFFSERV-PRIVATE-MIB::agentDiffServClassRuleMatchExcludeFlag,INTEGER,read-create,,current,true(1):false(2),Class Rule exclude flag - when set to true(1), the match condition  identified by agentDiffServClassRuleMatchEntryType is negated. This means that for a given field, every value is considered to be a match EXCEPT for  the value specified in the class rule. This flag must be false(2) for an  agendDiffServClassRuleMatchEntryType of refClass(10). object, but before any other match object in this row
.1.3.6.1.4.1.4526.1.6.3.4.2.3.1.25,GSM7312-QOS-DIFFSERV-PRIVATE-MIB::agentDiffServClassRuleStorageType,INTEGER,read-create,,current,other(1):volatile(2):nonVolatile(3):permanent(4):readOnly(5),Storage-type for this conceptual row
.1.3.6.1.4.1.4526.1.6.3.4.2.3.1.26,GSM7312-QOS-DIFFSERV-PRIVATE-MIB::agentDiffServClassRuleRowStatus,INTEGER,read-create,,current,active(1):notInService(2):notReady(3):createAndGo(4):createAndWait(5):destroy(6),The status of this conceptual row.
.1.3.6.1.4.1.4526.1.6.3.4.3,GSM7312-QOS-DIFFSERV-PRIVATE-MIB::agentDiffServPolicyGroup,,,,,,
.1.3.6.1.4.1.4526.1.6.3.4.3.1,GSM7312-QOS-DIFFSERV-PRIVATE-MIB::agentDiffServPolicyIndexNextFree,Unsigned32,read-only,,current,,This object contains an unused value for agentDiffServPolicyIndex, or a
.1.3.6.1.4.1.4526.1.6.3.4.3.2,GSM7312-QOS-DIFFSERV-PRIVATE-MIB::agentDiffServPolicyTable,,not-accessible,,current,,A table of the DiffServ policy entries.
.1.3.6.1.4.1.4526.1.6.3.4.3.2.1,GSM7312-QOS-DIFFSERV-PRIVATE-MIB::agentDiffServPolicyEntry,,not-accessible,agentDiffServPolicyIndex,current,,Represents entry for a DiffServ policy.
.1.3.6.1.4.1.4526.1.6.3.4.3.2.1.1,GSM7312-QOS-DIFFSERV-PRIVATE-MIB::agentDiffServPolicyIndex,Unsigned32,not-accessible,,current,,The identifier for DiffServ Policy table entry.
.1.3.6.1.4.1.4526.1.6.3.4.3.2.1.2,GSM7312-QOS-DIFFSERV-PRIVATE-MIB::agentDiffServPolicyName,OCTET,read-create,,current,,Name of the policy
.1.3.6.1.4.1.4526.1.6.3.4.3.2.1.3,GSM7312-QOS-DIFFSERV-PRIVATE-MIB::agentDiffServPolicyType,INTEGER,read-create,,current,in(1):out(2), The policy type dictates whether inbound or outbound policy attribute statements are used in the policy definition.
.1.3.6.1.4.1.4526.1.6.3.4.3.2.1.4,GSM7312-QOS-DIFFSERV-PRIVATE-MIB::agentDiffServPolicyInstIndexNextFree,Unsigned32,read-only,,current,,This object contains an unused value for agentDiffServPolicyInstIndex, or  a zero to indicate that none exists. This index is maintained on a  per-policy basis.
.1.3.6.1.4.1.4526.1.6.3.4.3.2.1.5,GSM7312-QOS-DIFFSERV-PRIVATE-MIB::agentDiffServPolicyStorageType,INTEGER,read-create,,current,other(1):volatile(2):nonVolatile(3):permanent(4):readOnly(5),Storage-type for this conceptual row
.1.3.6.1.4.1.4526.1.6.3.4.3.2.1.6,GSM7312-QOS-DIFFSERV-PRIVATE-MIB::agentDiffServPolicyRowStatus,INTEGER,read-create,,current,active(1):notInService(2):notReady(3):createAndGo(4):createAndWait(5):destroy(6),The status of this conceptual row.
.1.3.6.1.4.1.4526.1.6.3.4.3.3,GSM7312-QOS-DIFFSERV-PRIVATE-MIB::agentDiffServPolicyInstTable,,not-accessible,,current,,A table of the policy-class instance entries.
.1.3.6.1.4.1.4526.1.6.3.4.3.3.1,GSM7312-QOS-DIFFSERV-PRIVATE-MIB::agentDiffServPolicyInstEntry,,not-accessible,agentDiffServPolicyIndex:agentDiffServPolicyInstIndex,current,,Represents entry for a policy-class instance.
.1.3.6.1.4.1.4526.1.6.3.4.3.3.1.1,GSM7312-QOS-DIFFSERV-PRIVATE-MIB::agentDiffServPolicyInstIndex,Unsigned32,not-accessible,,current,,The identifier for policy-class Instance table entry within a policy.
.1.3.6.1.4.1.4526.1.6.3.4.3.3.1.2,GSM7312-QOS-DIFFSERV-PRIVATE-MIB::agentDiffServPolicyInstClassIndex,Unsigned32,read-create,,current,,Index of the DiffServ Class Table row, whose class definition is used class (instance) to a policy.
.1.3.6.1.4.1.4526.1.6.3.4.3.3.1.3,GSM7312-QOS-DIFFSERV-PRIVATE-MIB::agentDiffServPolicyInstAttrIndexNextFree,Unsigned32,read-only,,current,,This object contains an unused value for agentDiffServPolicyAttrIndex, or  a zero to indicate that none exists. This index is maintained on a  per-policy-class-instance basis.
.1.3.6.1.4.1.4526.1.6.3.4.3.3.1.4,GSM7312-QOS-DIFFSERV-PRIVATE-MIB::agentDiffServPolicyInstStorageType,INTEGER,read-create,,current,other(1):volatile(2):nonVolatile(3):permanent(4):readOnly(5),Storage-type for this conceptual row.
.1.3.6.1.4.1.4526.1.6.3.4.3.3.1.5,GSM7312-QOS-DIFFSERV-PRIVATE-MIB::agentDiffServPolicyInstRowStatus,INTEGER,read-create,,current,active(1):notInService(2):notReady(3):createAndGo(4):createAndWait(5):destroy(6),The status of this conceptual row.
.1.3.6.1.4.1.4526.1.6.3.4.3.4,GSM7312-QOS-DIFFSERV-PRIVATE-MIB::agentDiffServPolicyAttrTable,,not-accessible,,current,,A table of policy attribute entries
.1.3.6.1.4.1.4526.1.6.3.4.3.4.1,GSM7312-QOS-DIFFSERV-PRIVATE-MIB::agentDiffServPolicyAttrEntry,,not-accessible,agentDiffServPolicyIndex:agentDiffServPolicyInstIndex:agentDiffServPolicyAttrIndex,current,,Represents entry for policy attributes
.1.3.6.1.4.1.4526.1.6.3.4.3.4.1.1,GSM7312-QOS-DIFFSERV-PRIVATE-MIB::agentDiffServPolicyAttrIndex,Unsigned32,not-accessible,,current,,The identifier for policy-attribute entry 
.1.3.6.1.4.1.4526.1.6.3.4.3.4.1.2,GSM7312-QOS-DIFFSERV-PRIVATE-MIB::agentDiffServPolicyAttrStmtEntryType,INTEGER,read-create,,current,bandwidth(1):expedite(2):markCosVal(3):markIpDscpVal(4):markIpPrecedenceVal(5):policeSimple(6):policeSinglerate(7):policeTworate(8):randomdrop(9):shapeAverage(10):shapePeak(11),Policy attribute statement entry type -- this entry type is  created before any other policy attribute statement object in the row. The markIpDscpVal(4), markIpPrecedenceVal(5), policeSimple(6),  policeSinglerate(7) and policeTworate(8) values are only allowed for an  agentDiffServPolicyType of in(1). The remaining values are only allowed  for an agentDiffServPolicyType of out(2).
.1.3.6.1.4.1.4526.1.6.3.4.3.4.1.3,GSM7312-QOS-DIFFSERV-PRIVATE-MIB::agentDiffServPolicyAttrStmtBandwidthCrate,Unsigned32,read-create,,current,,Bandwidth committed rate attribute statement value -- identifies 
.1.3.6.1.4.1.4526.1.6.3.4.3.4.1.4,GSM7312-QOS-DIFFSERV-PRIVATE-MIB::agentDiffServPolicyAttrStmtBandwidthCrateUnits,INTEGER,read-create,,current,kbps(1):percentage(2),Bandwidth committed rate units attribute statement value -- this value  agentDiffServPolicyAttrStmtBandwidthCrate object as either  kilobits-per-second or as a percentage of interface link speed. This  attribute is only valid if the value of  agentDiffServPolicyAttrStmtEntryType is set to bandwidth(1).
.1.3.6.1.4.1.4526.1.6.3.4.3.4.1.5,GSM7312-QOS-DIFFSERV-PRIVATE-MIB::agentDiffServPolicyAttrStmtExpediteCrate,Unsigned32,read-create,,current,,Expedited (bandwidth) committed rate attribute statement value -- it  identifies the maximum guaranteed amount of bandwidth to be reserved for  the specified class instance within the policy. This attribute is only  valid if the value of agentDiffServPolicyAttrStmtEntryType is set to  expedite(2). 
.1.3.6.1.4.1.4526.1.6.3.4.3.4.1.6,GSM7312-QOS-DIFFSERV-PRIVATE-MIB::agentDiffServPolicyAttrStmtExpediteCrateUnits,INTEGER,read-create,,current,kbps(1):percentage(2),Expedited (bandwidth) committed rate units attribute statement value  agentDiffServPolicyAttrStmtExpediteCrate object as either  kilobits-per-second or as a percentage of interface link speed. This  attribute is only valid if the value of  agentDiffServPolicyAttrStmtEntryType is set to expedite(2).
.1.3.6.1.4.1.4526.1.6.3.4.3.4.1.7,GSM7312-QOS-DIFFSERV-PRIVATE-MIB::agentDiffServPolicyAttrStmtExpediteCburst,Unsigned32,read-create,,current,,Expedited (bandwidth) committed burst size attribute statement value, 
.1.3.6.1.4.1.4526.1.6.3.4.3.4.1.8,GSM7312-QOS-DIFFSERV-PRIVATE-MIB::agentDiffServPolicyAttrStmtMarkCosVal,Unsigned32,read-create,,current,,Three-bit 802.1p priority(CoS) value as part of the outbound policy for a  class instance. This attribute is only valid if the value of  agentDiffServPolicyAttrStmtEntryType is set to markCosVal(3).
.1.3.6.1.4.1.4526.1.6.3.4.3.4.1.9,GSM7312-QOS-DIFFSERV-PRIVATE-MIB::agentDiffServPolicyAttrStmtMarkIpDscpVal,Unsigned32,read-create,,current,,Specified IP DSCP value to mark in all inbound packets belonging to the  class-instance. This attribute is only valid if the value of  agentDiffServPolicyAttrStmtEntryType is set to markIpDscpVal(4).
.1.3.6.1.4.1.4526.1.6.3.4.3.4.1.10,GSM7312-QOS-DIFFSERV-PRIVATE-MIB::agentDiffServPolicyAttrStmtMarkIpPrecedenceVal,Unsigned32,read-create,,current,,Specified IP Precedence value to mark in all inbound packets belonging to  the class-instance. This attribute is only valid if the value of  agentDiffServPolicyAttrStmtEntryType is set to markIpPrecedenceVal(5).
.1.3.6.1.4.1.4526.1.6.3.4.3.4.1.11,GSM7312-QOS-DIFFSERV-PRIVATE-MIB::agentDiffServPolicyAttrStmtPoliceConformAct,INTEGER,read-create,,current,drop(1):markdscp(2):markprec(3):send(4),Policing conform action attribute statement value -- determines  agentDiffServPolicyAttrStmtEntryType is policeSimple(6),  policeSinglerate(7), or policeTworate(8).
.1.3.6.1.4.1.4526.1.6.3.4.3.4.1.12,GSM7312-QOS-DIFFSERV-PRIVATE-MIB::agentDiffServPolicyAttrStmtPoliceConformVal,Unsigned32,read-create,,current,,Policing conform DSCP or IP Precedence value attribute statement value --  used to mark the DSCP or IP Precedence field of conforming packets when  the conform action is markdscp(2) or markprec(3), respectively. This  attribute is only valid if the value of  agentDiffServPolicyAttrStmtEntryType is policeSimple(6),  policeSinglerate(7), or policeTworate(8).
.1.3.6.1.4.1.4526.1.6.3.4.3.4.1.13,GSM7312-QOS-DIFFSERV-PRIVATE-MIB::agentDiffServPolicyAttrStmtPoliceExceedAct,INTEGER,read-create,,current,drop(1):markdscp(2):markprec(3):send(4),Policing exceed action attribute statement value -- determines  tworate) currently configured for the specified class instance within the  policy. The default exceed action is drop(1). This attribute is only  valid if the value of agentDiffServPolicyAttrStmtEntryType is  policeSinglerate(7) or policeTworate(8).
.1.3.6.1.4.1.4526.1.6.3.4.3.4.1.14,GSM7312-QOS-DIFFSERV-PRIVATE-MIB::agentDiffServPolicyAttrStmtPoliceExceedVal,Unsigned32,read-create,,current,,Policing exceed DSCP or IP Precedence value attribute statement value --  used to mark the DSCP or IP Precedence field of excess packets when the  exceed action is markdscp(2) or markprec(3), respectively. This attribute  is only valid if the value of agentDiffServPolicyAttrStmtEntryType is  policeSinglerate(7) or policeTworate(8).
.1.3.6.1.4.1.4526.1.6.3.4.3.4.1.15,GSM7312-QOS-DIFFSERV-PRIVATE-MIB::agentDiffServPolicyAttrStmtPoliceNonconformAct,INTEGER,read-create,,current,drop(1):markdscp(2):markprec(3):send(4),Policing non-conform action attribute statement value -- determines the  action taken on nonconforming traffic for the policing style (simple,  singlerate,tworate) currently configured for the specified class instance  attribute is only valid if the value of  agentDiffServPolicyAttrStmtEntryType is policeSimple(6),  policeSinglerate(7), or policeTworate(8).
.1.3.6.1.4.1.4526.1.6.3.4.3.4.1.16,GSM7312-QOS-DIFFSERV-PRIVATE-MIB::agentDiffServPolicyAttrStmtPoliceNonconformVal,Unsigned32,read-create,,current,,Policing non-conform DSCP or IP Precedence value attribute statement value -- used to mark the DSCP or IP Precedence field of nonconforming packets  when the nonconform action is markdscp(2) or markprec(3), respectively.  This attribute is only valid if the value of  agentDiffServPolicyAttrStmtEntryType is policeSimple(6),  policeSinglerate(7), or policeTworate(8).
.1.3.6.1.4.1.4526.1.6.3.4.3.4.1.17,GSM7312-QOS-DIFFSERV-PRIVATE-MIB::agentDiffServPolicyAttrStmtPoliceSimpleCrate,Unsigned32,read-create,,current,,Simple policing committed rate attribute statement value, specified in  kbps. This attribute is only valid if the value of  agentDiffServPolicyAttrStmtEntryType is set to policeSimple(6).
.1.3.6.1.4.1.4526.1.6.3.4.3.4.1.18,GSM7312-QOS-DIFFSERV-PRIVATE-MIB::agentDiffServPolicyAttrStmtPoliceSimpleCburst,Unsigned32,read-create,,current,,Simple policing committed burst size attribute statement value, specified  in Kbytes. This attribute is only valid if the value of  agentDiffServPolicyAttrStmtEntryType is set to policeSimple(6).
.1.3.6.1.4.1.4526.1.6.3.4.3.4.1.19,GSM7312-QOS-DIFFSERV-PRIVATE-MIB::agentDiffServPolicyAttrStmtPoliceSinglerateCrate,Unsigned32,read-create,,current,,Single-rate policing committed rate attribute statement value, specified  in kbps. This attribute is only valid if the value of  agentDiffServPolicyAttrStmtEntryType is set to policeSinglerate(7).
.1.3.6.1.4.1.4526.1.6.3.4.3.4.1.20,GSM7312-QOS-DIFFSERV-PRIVATE-MIB::agentDiffServPolicyAttrStmtPoliceSinglerateCburst,Unsigned32,read-create,,current,,Single-rate policing committed burst size attribute statement value,  specified in Kbytes. This attribute is only valid if the value of  agentDiffServPolicyAttrStmtEntryType is set to policeSinglerate(7).
.1.3.6.1.4.1.4526.1.6.3.4.3.4.1.21,GSM7312-QOS-DIFFSERV-PRIVATE-MIB::agentDiffServPolicyAttrStmtPoliceSinglerateEburst,Unsigned32,read-create,,current,,Single-rate policing excess burst size attribute statement value,  specified in Kbytes. This attribute is only valid if the value of  agentDiffServPolicyAttrStmtEntryType is set to policeSinglerate(7).
.1.3.6.1.4.1.4526.1.6.3.4.3.4.1.22,GSM7312-QOS-DIFFSERV-PRIVATE-MIB::agentDiffServPolicyAttrStmtPoliceTworateCrate,Unsigned32,read-create,,current,,Two-rate policing committed rate attribute statement value, specified in  kbps. This attribute is only valid if the value of  agentDiffServPolicyAttrStmtEntryType is set to policeTworate(8).
.1.3.6.1.4.1.4526.1.6.3.4.3.4.1.23,GSM7312-QOS-DIFFSERV-PRIVATE-MIB::agentDiffServPolicyAttrStmtPoliceTworateCburst,Unsigned32,read-create,,current,,Two-rate policing committed burst size attribute statement value,  specified in Kbytes. This attribute is only valid if the value of  agentDiffServPolicyAttrStmtEntryType is set to policeTworate(8).
.1.3.6.1.4.1.4526.1.6.3.4.3.4.1.24,GSM7312-QOS-DIFFSERV-PRIVATE-MIB::agentDiffServPolicyAttrStmtPoliceTworatePrate,Unsigned32,read-create,,current,,Two-rate policing peak rate attribute statement value, specified in kbps. agentDiffServPolicyAttrStmtEntryType is set to policeTworate(8).
.1.3.6.1.4.1.4526.1.6.3.4.3.4.1.25,GSM7312-QOS-DIFFSERV-PRIVATE-MIB::agentDiffServPolicyAttrStmtPoliceTworatePburst,Unsigned32,read-create,,current,,Two-rate policing peak burst size attribute statement value, specified in  Kbytes. This attribute is only valid if the value of  agentDiffServPolicyAttrStmtEntryType is set to policeTworate(8).
.1.3.6.1.4.1.4526.1.6.3.4.3.4.1.26,GSM7312-QOS-DIFFSERV-PRIVATE-MIB::agentDiffServPolicyAttrStmtRandomdropMinThresh,Unsigned32,read-create,,current,,Random drop minimum threshold attribute statement value -- the average  queue depth minimum threshold in bytes used by the WRED algorithm. This  attribute is only valid if the value of  agentDiffServPolicyAttrStmtEntryType is set to randomdrop(9).
.1.3.6.1.4.1.4526.1.6.3.4.3.4.1.27,GSM7312-QOS-DIFFSERV-PRIVATE-MIB::agentDiffServPolicyAttrStmtRandomdropMaxThresh,Unsigned32,read-create,,current,,Random drop maximum threshold attribute statement value -- the average  queue depth maximum threshold in bytes used by the WRED algorithm. This  attribute is only valid if the value of  agentDiffServPolicyAttrStmtEntryType is set to randomdrop(9).
.1.3.6.1.4.1.4526.1.6.3.4.3.4.1.28,GSM7312-QOS-DIFFSERV-PRIVATE-MIB::agentDiffServPolicyAttrStmtRandomdropMaxDropProb,Unsigned32,read-create,,current,,Random drop maximum drop probability attribute statement value -- the  packet drop probability when the queue depth average reaches its maximum  threshold. It is expressed as a percentage, and is an integer from 0 to  100. This attribute is only valid if the value of  agentDiffServPolicyAttrStmtEntryType is set to randomdrop(9).
.1.3.6.1.4.1.4526.1.6.3.4.3.4.1.29,GSM7312-QOS-DIFFSERV-PRIVATE-MIB::agentDiffServPolicyAttrStmtRandomdropSamplingRate,Unsigned32,read-create,,current,,Random drop sampling rate attribute statement value -- the period at which  the queue depth is sampled for computing an average, expressed in  microseconds. This value is an integer from 0 to 1000000, with a default  value of 0 (meaning per packet sampling). This attribute is only valid if  the value of agentDiffServPolicyAttrStmtEntryType is set to randomdrop(9).
.1.3.6.1.4.1.4526.1.6.3.4.3.4.1.30,GSM7312-QOS-DIFFSERV-PRIVATE-MIB::agentDiffServPolicyAttrStmtRandomdropDecayExponent,Unsigned32,read-create,,current,,Random drop decay exponent attribute statement value -- determines how
.1.3.6.1.4.1.4526.1.6.3.4.3.4.1.31,GSM7312-QOS-DIFFSERV-PRIVATE-MIB::agentDiffServPolicyAttrStmtShapeAverageCrate,Unsigned32,read-create,,current,,Average-rate shaping committed rate attribute statement value, specified  in kbps -- used to establish average rate traffic shaping for the  specified class , which limits transmissions for the class to the  committed information rate, with any excess traffic delayed via queueing.  This attribute is only valid if the value of  agentDiffServPolicyAttrStmtEntryType is set to shapeAverage(10).
.1.3.6.1.4.1.4526.1.6.3.4.3.4.1.32,GSM7312-QOS-DIFFSERV-PRIVATE-MIB::agentDiffServPolicyAttrStmtShapePeakCrate,Unsigned32,read-create,,current,,Peak-rate shaping committed rate attribute statement value, specified in  kbps -- used to establish peak rate traffic shaping for the specified  class , which allows transmissions for the class to exceed the committed  information rate by sending excess traffic with the understanding that it  could be dropped by a downstream network element. This attribute is only  valid if the value of agentDiffServPolicyAttrStmtEntryType is set to  shapePeak(11).
.1.3.6.1.4.1.4526.1.6.3.4.3.4.1.33,GSM7312-QOS-DIFFSERV-PRIVATE-MIB::agentDiffServPolicyAttrStmtShapePeakPrate,Unsigned32,read-create,,current,,Peak-rate shaping peak rate attribute statement value, specified in kbps which allows transmissions for the class to exceed the committed  information rate by sending excess traffic with the understanding that it  could be dropped by a downstream network element. This attribute is only  valid if the value of agentDiffServPolicyAttrStmtEntryType is set to  shapePeak(11).
.1.3.6.1.4.1.4526.1.6.3.4.3.4.1.34,GSM7312-QOS-DIFFSERV-PRIVATE-MIB::agentDiffServPolicyAttrStorageType,INTEGER,read-create,,current,other(1):volatile(2):nonVolatile(3):permanent(4):readOnly(5),Storage-type for this conceptual row.
.1.3.6.1.4.1.4526.1.6.3.4.3.4.1.35,GSM7312-QOS-DIFFSERV-PRIVATE-MIB::agentDiffServPolicyAttrRowStatus,INTEGER,read-create,,current,active(1):notInService(2):notReady(3):createAndGo(4):createAndWait(5):destroy(6),The status of this conceptual row.
.1.3.6.1.4.1.4526.1.6.3.4.3.5,GSM7312-QOS-DIFFSERV-PRIVATE-MIB::agentDiffServPolicyPerfInTable,,not-accessible,,current,,A table of inbound policy-class performance entries
.1.3.6.1.4.1.4526.1.6.3.4.3.5.1,GSM7312-QOS-DIFFSERV-PRIVATE-MIB::agentDiffServPolicyPerfInEntry,,not-accessible,agentDiffServPolicyIndex:agentDiffServPolicyInstIndex:ifIndex,current,,Represents entry for the performance attributes of the associated inbound 
.1.3.6.1.4.1.4526.1.6.3.4.3.5.1.1,GSM7312-QOS-DIFFSERV-PRIVATE-MIB::agentDiffServPolicyPerfInOfferedOctets,Counter32,read-only,,current,,Offered octets count for the inbound policy-class instance performance  entry.
.1.3.6.1.4.1.4526.1.6.3.4.3.5.1.2,GSM7312-QOS-DIFFSERV-PRIVATE-MIB::agentDiffServPolicyPerfInOfferedPackets,Counter32,read-only,,current,,Offered packets count for the inbound policy-class instance performance  entry.
.1.3.6.1.4.1.4526.1.6.3.4.3.5.1.3,GSM7312-QOS-DIFFSERV-PRIVATE-MIB::agentDiffServPolicyPerfInDiscardedOctets,Counter32,read-only,,current,,Discarded octets count for the inbound policy-class instance performance  entry.
.1.3.6.1.4.1.4526.1.6.3.4.3.5.1.4,GSM7312-QOS-DIFFSERV-PRIVATE-MIB::agentDiffServPolicyPerfInDiscardedPackets,Counter32,read-only,,current,,Discarded packets count for the inbound policy-class instance performance  entry.
.1.3.6.1.4.1.4526.1.6.3.4.3.5.1.5,GSM7312-QOS-DIFFSERV-PRIVATE-MIB::agentDiffServPolicyPerfInHCOfferedOctets,Counter64,read-only,,current,,Offered octets high capacity count for the inbound policy-class instance  performance entry.
.1.3.6.1.4.1.4526.1.6.3.4.3.5.1.6,GSM7312-QOS-DIFFSERV-PRIVATE-MIB::agentDiffServPolicyPerfInHCOfferedPackets,Counter64,read-only,,current,,Offered packets high capacity count for the inbound policy-class instance  performance entry.
.1.3.6.1.4.1.4526.1.6.3.4.3.5.1.7,GSM7312-QOS-DIFFSERV-PRIVATE-MIB::agentDiffServPolicyPerfInHCDiscardedOctets,Counter64,read-only,,current,,Discarded octets high capacity count for the inbound policy-class instance  performance entry.
.1.3.6.1.4.1.4526.1.6.3.4.3.5.1.8,GSM7312-QOS-DIFFSERV-PRIVATE-MIB::agentDiffServPolicyPerfInHCDiscardedPackets,Counter64,read-only,,current,,Discarded packets high capacity count for the inbound policy-class  instance performance entry.
.1.3.6.1.4.1.4526.1.6.3.4.3.5.1.9,GSM7312-QOS-DIFFSERV-PRIVATE-MIB::agentDiffServPolicyPerfInStorageType,INTEGER,read-only,,current,other(1):volatile(2):nonVolatile(3):permanent(4):readOnly(5),Storage-type for this conceptual row.
.1.3.6.1.4.1.4526.1.6.3.4.3.5.1.10,GSM7312-QOS-DIFFSERV-PRIVATE-MIB::agentDiffServPolicyPerfInRowStatus,INTEGER,read-only,,current,active(1):notInService(2):notReady(3):createAndGo(4):createAndWait(5):destroy(6),The status of this conceptual row.
.1.3.6.1.4.1.4526.1.6.3.4.3.6,GSM7312-QOS-DIFFSERV-PRIVATE-MIB::agentDiffServPolicyPerfOutTable,,not-accessible,,current,,A table of outbound policy-class performance entries
.1.3.6.1.4.1.4526.1.6.3.4.3.6.1,GSM7312-QOS-DIFFSERV-PRIVATE-MIB::agentDiffServPolicyPerfOutEntry,,not-accessible,agentDiffServPolicyIndex:agentDiffServPolicyInstIndex:ifIndex,current,,Represents entry for the performance attributes of the associated outbound 
.1.3.6.1.4.1.4526.1.6.3.4.3.6.1.1,GSM7312-QOS-DIFFSERV-PRIVATE-MIB::agentDiffServPolicyPerfOutTailDroppedOctets,Counter32,read-only,,current,,Tail-dropped octets count for the outbound policy-class instance  performance entry.
.1.3.6.1.4.1.4526.1.6.3.4.3.6.1.2,GSM7312-QOS-DIFFSERV-PRIVATE-MIB::agentDiffServPolicyPerfOutTailDroppedPackets,Counter32,read-only,,current,,Tail-dropped packets count for the outbound policy-class instance  performance entry.
.1.3.6.1.4.1.4526.1.6.3.4.3.6.1.3,GSM7312-QOS-DIFFSERV-PRIVATE-MIB::agentDiffServPolicyPerfOutRandomDroppedOctets,Counter32,read-only,,current,,Random-dropped octets count for the outbound policy-class instance  performance entry.
.1.3.6.1.4.1.4526.1.6.3.4.3.6.1.4,GSM7312-QOS-DIFFSERV-PRIVATE-MIB::agentDiffServPolicyPerfOutRandomDroppedPackets,Counter32,read-only,,current,,Random-dropped packets count for the outbound policy-class instance  performance entry.
.1.3.6.1.4.1.4526.1.6.3.4.3.6.1.5,GSM7312-QOS-DIFFSERV-PRIVATE-MIB::agentDiffServPolicyPerfOutShapeDelayedOctets,Counter32,read-only,,current,,Shape-delayed octets count for the outbound policy-class instance  performance entry.
.1.3.6.1.4.1.4526.1.6.3.4.3.6.1.6,GSM7312-QOS-DIFFSERV-PRIVATE-MIB::agentDiffServPolicyPerfOutShapeDelayedPackets,Counter32,read-only,,current,,Shape-delayed packets count for the outbound policy-class instance  performance entry.
.1.3.6.1.4.1.4526.1.6.3.4.3.6.1.7,GSM7312-QOS-DIFFSERV-PRIVATE-MIB::agentDiffServPolicyPerfOutSentOctets,Counter32,read-only,,current,,Sent octets count for the outbound policy-class instance performance  entry.
.1.3.6.1.4.1.4526.1.6.3.4.3.6.1.8,GSM7312-QOS-DIFFSERV-PRIVATE-MIB::agentDiffServPolicyPerfOutSentPackets,Counter32,read-only,,current,,Sent packets count for the outbound policy-class instance performance  entry.
.1.3.6.1.4.1.4526.1.6.3.4.3.6.1.9,GSM7312-QOS-DIFFSERV-PRIVATE-MIB::agentDiffServPolicyPerfOutHCTailDroppedOctets,Counter64,read-only,,current,,Tail-dropped octets high capacity count for the outbound policy-class  instance performance entry.
.1.3.6.1.4.1.4526.1.6.3.4.3.6.1.10,GSM7312-QOS-DIFFSERV-PRIVATE-MIB::agentDiffServPolicyPerfOutHCTailDroppedPackets,Counter64,read-only,,current,,Tail-dropped packets high capacity count for the outbound policy-class  instance performance entry.
.1.3.6.1.4.1.4526.1.6.3.4.3.6.1.11,GSM7312-QOS-DIFFSERV-PRIVATE-MIB::agentDiffServPolicyPerfOutHCRandomDroppedOctets,Counter64,read-only,,current,,Random-dropped octets high capacity count for the outbound policy-class  instance performance entry.
.1.3.6.1.4.1.4526.1.6.3.4.3.6.1.12,GSM7312-QOS-DIFFSERV-PRIVATE-MIB::agentDiffServPolicyPerfOutHCRandomDroppedPackets,Counter64,read-only,,current,,Random-dropped packets high capacity count for the outbound policy-class  instance performance entry.
.1.3.6.1.4.1.4526.1.6.3.4.3.6.1.13,GSM7312-QOS-DIFFSERV-PRIVATE-MIB::agentDiffServPolicyPerfOutHCShapeDelayedOctets,Counter64,read-only,,current,,Shape-delayed octets high capacity count for the outbound policy-class  instance performance entry.
.1.3.6.1.4.1.4526.1.6.3.4.3.6.1.14,GSM7312-QOS-DIFFSERV-PRIVATE-MIB::agentDiffServPolicyPerfOutHCShapeDelayedPackets,Counter64,read-only,,current,,Shape-delayed packets high capacity count for the outbound policy-class  instance performance entry.
.1.3.6.1.4.1.4526.1.6.3.4.3.6.1.15,GSM7312-QOS-DIFFSERV-PRIVATE-MIB::agentDiffServPolicyPerfOutHCSentOctets,Counter64,read-only,,current,,Sent octets high capacity count for the outbound policy-class instance  performance entry.
.1.3.6.1.4.1.4526.1.6.3.4.3.6.1.16,GSM7312-QOS-DIFFSERV-PRIVATE-MIB::agentDiffServPolicyPerfOutHCSentPackets,Counter64,read-only,,current,,Sent packets high capacity count for the outbound policy-class instance  performance entry.
.1.3.6.1.4.1.4526.1.6.3.4.3.6.1.17,GSM7312-QOS-DIFFSERV-PRIVATE-MIB::agentDiffServPolicyPerfOutStorageType,INTEGER,read-only,,current,other(1):volatile(2):nonVolatile(3):permanent(4):readOnly(5),Storage-type for this conceptual row.
.1.3.6.1.4.1.4526.1.6.3.4.3.6.1.18,GSM7312-QOS-DIFFSERV-PRIVATE-MIB::agentDiffServPolicyPerfOutRowStatus,INTEGER,read-only,,current,active(1):notInService(2):notReady(3):createAndGo(4):createAndWait(5):destroy(6),The status of this conceptual row.
.1.3.6.1.4.1.4526.1.6.3.4.4,GSM7312-QOS-DIFFSERV-PRIVATE-MIB::agentDiffServServiceGroup,,,,,,
.1.3.6.1.4.1.4526.1.6.3.4.4.1,GSM7312-QOS-DIFFSERV-PRIVATE-MIB::agentDiffServServiceTable,,not-accessible,,current,,A table of the service entries.
.1.3.6.1.4.1.4526.1.6.3.4.4.1.1,GSM7312-QOS-DIFFSERV-PRIVATE-MIB::agentDiffServServiceEntry,,not-accessible,agentDiffServServiceIfIndex:agentDiffServServiceIfDirection,current,,Represents entry for policy assigned to an interface in a particular  direction.
.1.3.6.1.4.1.4526.1.6.3.4.4.1.1.1,GSM7312-QOS-DIFFSERV-PRIVATE-MIB::agentDiffServServiceIfIndex,Integer32,not-accessible,,current,,External interface number of the interface to which policy is assigned.
.1.3.6.1.4.1.4526.1.6.3.4.4.1.1.2,GSM7312-QOS-DIFFSERV-PRIVATE-MIB::agentDiffServServiceIfDirection,INTEGER,not-accessible,,current,in(1):out(2),Interface direction to which the policy is assigned.
.1.3.6.1.4.1.4526.1.6.3.4.4.1.1.3,GSM7312-QOS-DIFFSERV-PRIVATE-MIB::agentDiffServServicePolicyIndex,Unsigned32,read-create,,current,,Index of the Policy Table row whose policy definition is attached to the  interface in the specified direction.
.1.3.6.1.4.1.4526.1.6.3.4.4.1.1.4,GSM7312-QOS-DIFFSERV-PRIVATE-MIB::agentDiffServServiceIfOperStatus,INTEGER,read-only,,current,up(1):down(2),The current operational state of the DiffServ service 
.1.3.6.1.4.1.4526.1.6.3.4.4.1.1.5,GSM7312-QOS-DIFFSERV-PRIVATE-MIB::agentDiffServServiceStorageType,INTEGER,read-create,,current,other(1):volatile(2):nonVolatile(3):permanent(4):readOnly(5),Storage-type for this conceptual row
.1.3.6.1.4.1.4526.1.6.3.4.4.1.1.6,GSM7312-QOS-DIFFSERV-PRIVATE-MIB::agentDiffServServiceRowStatus,INTEGER,read-create,,current,active(1):notInService(2):notReady(3):createAndGo(4):createAndWait(5):destroy(6),The status of this conceptual row.
.1.3.6.1.4.1.4526.1.6.3.4.4.2,GSM7312-QOS-DIFFSERV-PRIVATE-MIB::agentDiffServServicePerfTable,,not-accessible,,current,,A table of service performance entries.
.1.3.6.1.4.1.4526.1.6.3.4.4.2.1,GSM7312-QOS-DIFFSERV-PRIVATE-MIB::agentDiffServServicePerfEntry,,not-accessible,,current,,Represents a service performance entry.
.1.3.6.1.4.1.4526.1.6.3.4.4.2.1.1,GSM7312-QOS-DIFFSERV-PRIVATE-MIB::agentDiffServServicePerfOfferedOctets,Counter32,read-only,,current,,Offered octets count for the specified service interface and direction
.1.3.6.1.4.1.4526.1.6.3.4.4.2.1.2,GSM7312-QOS-DIFFSERV-PRIVATE-MIB::agentDiffServServicePerfOfferedPackets,Counter32,read-only,,current,,Offered packets count for specified service interface and direction
.1.3.6.1.4.1.4526.1.6.3.4.4.2.1.3,GSM7312-QOS-DIFFSERV-PRIVATE-MIB::agentDiffServServicePerfDiscardedOctets,Counter32,read-only,,current,,Discarded octets count for the specified service interface and direction
.1.3.6.1.4.1.4526.1.6.3.4.4.2.1.4,GSM7312-QOS-DIFFSERV-PRIVATE-MIB::agentDiffServServicePerfDiscardedPackets,Counter32,read-only,,current,,Discarded packets count for the specified service interface and direction
.1.3.6.1.4.1.4526.1.6.3.4.4.2.1.5,GSM7312-QOS-DIFFSERV-PRIVATE-MIB::agentDiffServServicePerfSentOctets,Counter32,read-only,,current,,Sent octets count for the specified service interface and direction
.1.3.6.1.4.1.4526.1.6.3.4.4.2.1.6,GSM7312-QOS-DIFFSERV-PRIVATE-MIB::agentDiffServServicePerfSentPackets,Counter32,read-only,,current,,Sent packets count for the specified service interface and direction
.1.3.6.1.4.1.4526.1.6.3.4.4.2.1.7,GSM7312-QOS-DIFFSERV-PRIVATE-MIB::agentDiffServServicePerfHCOfferedOctets,Counter64,read-only,,current,,Offered octets high capacity count for the specified service interface  and direction
.1.3.6.1.4.1.4526.1.6.3.4.4.2.1.8,GSM7312-QOS-DIFFSERV-PRIVATE-MIB::agentDiffServServicePerfHCOfferedPackets,Counter64,read-only,,current,,Offered packets high capacity count for the specified service interface  and direction
.1.3.6.1.4.1.4526.1.6.3.4.4.2.1.9,GSM7312-QOS-DIFFSERV-PRIVATE-MIB::agentDiffServServicePerfHCDiscardedOctets,Counter64,read-only,,current,,Discarded octets high capacity count for the specified service interface  and direction
.1.3.6.1.4.1.4526.1.6.3.4.4.2.1.10,GSM7312-QOS-DIFFSERV-PRIVATE-MIB::agentDiffServServicePerfHCDiscardedPackets,Counter64,read-only,,current,,Discarded packets high capacity count for the specified service interface  and direction
.1.3.6.1.4.1.4526.1.6.3.4.4.2.1.11,GSM7312-QOS-DIFFSERV-PRIVATE-MIB::agentDiffServServicePerfHCSentOctets,Counter64,read-only,,current,,Sent octets high capacity count for the specified service interface and  direction
.1.3.6.1.4.1.4526.1.6.3.4.4.2.1.12,GSM7312-QOS-DIFFSERV-PRIVATE-MIB::agentDiffServServicePerfHCSentPackets,Counter64,read-only,,current,,Sent packets high capacity count for the specified service interface and  direction
.1.3.6.1.4.1.4526.1.6.8,GSM7312-RADIUS-MIB::gsm7312Radius,,,,,,The GSM7312 Radius MIB
.1.3.6.1.4.1.4526.1.6.8.1,GSM7312-RADIUS-MIB::agentRadiusConfigGroup,,,,,,
.1.3.6.1.4.1.4526.1.6.8.1.1,GSM7312-RADIUS-MIB::agentRadiusMaxTransmit,Unsigned32,read-write,,current,,Maximum number of retransmissions of a RADIUS request packet
.1.3.6.1.4.1.4526.1.6.8.1.2,GSM7312-RADIUS-MIB::agentRadiusTimeout,Unsigned32,read-write,,current,,Time out duration (in seconds) before packets are retransmitted
.1.3.6.1.4.1.4526.1.6.8.1.3,GSM7312-RADIUS-MIB::agentRadiusAccountingMode,INTEGER,read-write,,current,enable(1):disable(2),Identifies if RADIUS Accounting has been enabled or not
.1.3.6.1.4.1.4526.1.6.8.1.4,GSM7312-RADIUS-MIB::agentRadiusStatsClear,INTEGER,read-write,,current,enable(1):disable(2),When set to enable(1), all Radius statistics will be reset.
.1.3.6.1.4.1.4526.1.6.8.1.5,GSM7312-RADIUS-MIB::agentRadiusAccountingIndexNextValid,Integer32,read-only,,current,,Indicates the next valid index into the agentRadiusAccountingConfigTable  for creation. If no additional entries are allowed, this will be 0.
.1.3.6.1.4.1.4526.1.6.8.1.6,GSM7312-RADIUS-MIB::agentRadiusAccountingConfigTable,,not-accessible,,current,,Table with information about Radius Accounting Server IP Addresses, port numbers and shared secret. Only one entry is supported at this time.
.1.3.6.1.4.1.4526.1.6.8.1.6.1,GSM7312-RADIUS-MIB::agentRadiusAccountingConfigEntry,,not-accessible,agentRadiusAccountingServerIndex,current,,Entry consisting of configuration data for a Radius Accounting Server.
.1.3.6.1.4.1.4526.1.6.8.1.6.1.1,GSM7312-RADIUS-MIB::agentRadiusAccountingServerIndex,Integer32,not-accessible,,current,,Unique index of the configured RADIUS accounting server
.1.3.6.1.4.1.4526.1.6.8.1.6.1.2,GSM7312-RADIUS-MIB::agentRadiusAccountingServerAddress,IpAddress,read-create,,current,,IP Address of the configured RADIUS accounting server. This object cannot be changed after creation.
.1.3.6.1.4.1.4526.1.6.8.1.6.1.3,GSM7312-RADIUS-MIB::agentRadiusAccountingPort,Unsigned32,read-write,,current,,Port number for the RADIUS accounting server. This object cannot be configured on row creation.
.1.3.6.1.4.1.4526.1.6.8.1.6.1.4,GSM7312-RADIUS-MIB::agentRadiusAccountingSecret,OCTET,read-write,,current,,Configured shared sercret for the RADIUS accounting server. This object cannot be configured on row creation.
.1.3.6.1.4.1.4526.1.6.8.1.6.1.5,GSM7312-RADIUS-MIB::agentRadiusAccountingStatus,INTEGER,read-create,,current,active(1):notInService(2):notReady(3):createAndGo(4):createAndWait(5):destroy(6),
.1.3.6.1.4.1.4526.1.6.8.1.7,GSM7312-RADIUS-MIB::agentRadiusServerIndexNextValid,Integer32,read-only,,current,,Indicates the next valid index into the agentRadiusServerConfigTable  for creation. If no additional entries are allowed, this will be 0.
.1.3.6.1.4.1.4526.1.6.8.1.8,GSM7312-RADIUS-MIB::agentRadiusServerConfigTable,,not-accessible,,current,,Table with information about Radius Accounting Server IP Addresses, port numbers and shared secret
.1.3.6.1.4.1.4526.1.6.8.1.8.1,GSM7312-RADIUS-MIB::agentRadiusServerConfigEntry,,not-accessible,agentRadiusServerIndex,current,,Entry consisting of configuration data for a Radius Server. Creation requires setting 
.1.3.6.1.4.1.4526.1.6.8.1.8.1.1,GSM7312-RADIUS-MIB::agentRadiusServerIndex,Integer32,not-accessible,,current,,Unique index of the configured RADIUS server
.1.3.6.1.4.1.4526.1.6.8.1.8.1.2,GSM7312-RADIUS-MIB::agentRadiusServerAddress,IpAddress,read-create,,current,,IP Address of the configured RADIUS server. This object cannot be changed after creation.
.1.3.6.1.4.1.4526.1.6.8.1.8.1.3,GSM7312-RADIUS-MIB::agentRadiusServerPort,Unsigned32,read-write,,current,,Port number for the RADIUS server. This object cannot be configured on row creation.
.1.3.6.1.4.1.4526.1.6.8.1.8.1.4,GSM7312-RADIUS-MIB::agentRadiusServerSecret,OCTET,read-write,,current,,Configured shared sercret for the RADIUS server. This object cannot be configured on row creation.
.1.3.6.1.4.1.4526.1.6.8.1.8.1.5,GSM7312-RADIUS-MIB::agentRadiusServerPrimaryMode,INTEGER,read-write,,current,enable(1):disable(2),Configure the RADIUS server to be the primary server. If there is any  other server that is configured to be primary, that server is set to be  a seconday server and this entry is set Primary. This object cannot be configured on row creation.
.1.3.6.1.4.1.4526.1.6.8.1.8.1.6,GSM7312-RADIUS-MIB::agentRadiusServerCurrentMode,INTEGER,read-only,,current,yes(1):no(2),Indicate if the RADIUS server is the current server in user for authentication.
.1.3.6.1.4.1.4526.1.6.8.1.8.1.7,GSM7312-RADIUS-MIB::agentRadiusServerMsgAuth,INTEGER,read-write,,current,enable(1):disable(2),Enable or disable the message authenticator attribute for this  RADIUS server. This object cannot be configured on row creation.
.1.3.6.1.4.1.4526.1.6.8.1.8.1.8,GSM7312-RADIUS-MIB::agentRadiusServerStatus,INTEGER,read-create,,current,active(1):notInService(2):notReady(3):createAndGo(4):createAndWait(5):destroy(6),
.1.3.6.1.4.1.4526.1.6.11,GSM7312-MGMT-SECURITY-MIB::gsm7312MgmtSecurity,,,,,,
.1.3.6.1.4.1.4526.1.6.11.1,GSM7312-MGMT-SECURITY-MIB::agentSSLConfigGroup,,,,,,
.1.3.6.1.4.1.4526.1.6.11.1.1,GSM7312-MGMT-SECURITY-MIB::agentSSLAdminMode,INTEGER,read-write,,current,enable(1):disable(2),Configures whether the SSL service is enabled on this switch. The default value is disable(2).
.1.3.6.1.4.1.4526.1.6.11.1.2,GSM7312-MGMT-SECURITY-MIB::agentSSLSecurePort,Integer32,read-write,,current,,Configures the port the SSL service will respond on. The default  value is 443.
.1.3.6.1.4.1.4526.1.6.11.1.3,GSM7312-MGMT-SECURITY-MIB::agentSSLProtocolLevel,INTEGER,read-write,,current,ssl30(1):tls10(2):both(3),Configures which protocol versions of SSL are enabled on this switch. The default value is both(3).
.1.3.6.1.4.1.4526.1.6.11.2,GSM7312-MGMT-SECURITY-MIB::agentSSHConfigGroup,,,,,,
.1.3.6.1.4.1.4526.1.6.11.2.1,GSM7312-MGMT-SECURITY-MIB::agentSSHAdminMode,INTEGER,read-write,,current,enable(1):disable(2),Configures whether the SSH service is enabled on this switch. The default value is disable(2).
.1.3.6.1.4.1.4526.1.6.11.2.2,GSM7312-MGMT-SECURITY-MIB::agentSSHProtocolLevel,INTEGER,read-write,,current,ssh10(1):ssh20(2):both(3),Configures which protocol versions of SSH are enabled on this switch. The default value is both(3).
.1.3.6.1.4.1.4526.1.6.11.2.3,GSM7312-MGMT-SECURITY-MIB::agentSSHSessionsCount,Integer32,read-only,,current,,Current number of active SSH sessions on this switch.
.1.3.6.1.4.1.4526.1.7,BROADCOM-REF-MIB::gsm7324,,,,,,
.1.3.6.1.4.1.4526.1.7.1,GSM7324-SWITCHING-MIB::gsm7324Switching,,,,,,
.1.3.6.1.4.1.4526.1.7.1.1,GSM7324-SWITCHING-MIB::agentInfoGroup,,,,,,
.1.3.6.1.4.1.4526.1.7.1.1.1,GSM7324-SWITCHING-MIB::agentInventoryGroup,,,,,,
.1.3.6.1.4.1.4526.1.7.1.1.1.1,GSM7324-SWITCHING-MIB::agentInventorySysDescription,OCTET,read-only,,current,,The switch's Inventory system description. 
.1.3.6.1.4.1.4526.1.7.1.1.1.2,GSM7324-SWITCHING-MIB::agentInventoryMachineType,OCTET,read-only,,current,,Type of the Machine used in the Switch 
.1.3.6.1.4.1.4526.1.7.1.1.1.3,GSM7324-SWITCHING-MIB::agentInventoryBurnedInMacAddress,OCTET,read-only,,current,,Burned-In MAC Address
.1.3.6.1.4.1.4526.1.7.1.1.1.4,GSM7324-SWITCHING-MIB::agentInventoryAdditionalPackages,OCTET,read-only,,current,,Lists additional functional packages available on this unit.
.1.3.6.1.4.1.4526.1.7.1.1.1.5,GSM7324-SWITCHING-MIB::agentInventorySoftwareVersion,OCTET,read-only,,current,,Lists the version of software loaded on this unit.
.1.3.6.1.4.1.4526.1.7.1.1.2,GSM7324-SWITCHING-MIB::agentTrapLogGroup,,,,,,
.1.3.6.1.4.1.4526.1.7.1.1.2.1,GSM7324-SWITCHING-MIB::agentTrapLogTotal,Integer32,read-only,,current,,The total number of traps sent since last reset.
.1.3.6.1.4.1.4526.1.7.1.1.2.3,GSM7324-SWITCHING-MIB::agentTrapLogTotalSinceLastViewed,Integer32,read-only,,deprecated,,The number of traps sent since last viewed.
.1.3.6.1.4.1.4526.1.7.1.1.2.4,GSM7324-SWITCHING-MIB::agentTrapLogTable,,not-accessible,,current,,Agent Trap Log
.1.3.6.1.4.1.4526.1.7.1.1.2.4.1,GSM7324-SWITCHING-MIB::agentTrapLogEntry,,not-accessible,agentTrapLogIndex,current,,Agent trap log entry
.1.3.6.1.4.1.4526.1.7.1.1.2.4.1.1,GSM7324-SWITCHING-MIB::agentTrapLogIndex,Integer32,read-only,,current,,Unique index of trap entry
.1.3.6.1.4.1.4526.1.7.1.1.2.4.1.2,GSM7324-SWITCHING-MIB::agentTrapLogSystemTime,OCTET,read-only,,current,,System uptime when trap was sent.  This entry shows how long the system has been up when the trap occurred.
.1.3.6.1.4.1.4526.1.7.1.1.2.4.1.3,GSM7324-SWITCHING-MIB::agentTrapLogTrap,OCTET,read-only,,current,,Description of the trap sent.
.1.3.6.1.4.1.4526.1.7.1.1.3,GSM7324-SWITCHING-MIB::agentSupportedMibTable,,not-accessible,,current,,Supported MIB table
.1.3.6.1.4.1.4526.1.7.1.1.3.1,GSM7324-SWITCHING-MIB::agentSupportedMibEntry,,not-accessible,agentSupportedMibIndex,current,,Supported MIB entry
.1.3.6.1.4.1.4526.1.7.1.1.3.1.1,GSM7324-SWITCHING-MIB::agentSupportedMibIndex,Integer32,read-only,,current,,Unique index of the Supported MIB entry
.1.3.6.1.4.1.4526.1.7.1.1.3.1.2,GSM7324-SWITCHING-MIB::agentSupportedMibName,OCTET,read-only,,current,,The name of the MIB (RFC or IEEE) that is supported.
.1.3.6.1.4.1.4526.1.7.1.1.3.1.3,GSM7324-SWITCHING-MIB::agentSupportedMibDescription,OCTET,read-only,,current,,Description of the MIB (RFC or IEEE) that is supported.
.1.3.6.1.4.1.4526.1.7.1.2,GSM7324-SWITCHING-MIB::agentConfigGroup,,,,,,
.1.3.6.1.4.1.4526.1.7.1.2.1,GSM7324-SWITCHING-MIB::agentCLIConfigGroup,,,,,,
.1.3.6.1.4.1.4526.1.7.1.2.1.1,GSM7324-SWITCHING-MIB::agentLoginSessionTable,,not-accessible,,current,,A table of the switch's login session
.1.3.6.1.4.1.4526.1.7.1.2.1.1.1,GSM7324-SWITCHING-MIB::agentLoginSessionEntry,,not-accessible,agentLoginSessionIndex,current,,Login Session Entry
.1.3.6.1.4.1.4526.1.7.1.2.1.1.1.1,GSM7324-SWITCHING-MIB::agentLoginSessionIndex,Integer32,read-only,,current,,Agent Login Session Index of the switch
.1.3.6.1.4.1.4526.1.7.1.2.1.1.1.2,GSM7324-SWITCHING-MIB::agentLoginSessionUserName,OCTET,read-only,,current,,Agent Login Session UserName of the switch
.1.3.6.1.4.1.4526.1.7.1.2.1.1.1.3,GSM7324-SWITCHING-MIB::agentLoginSessionIPAddress,IpAddress,read-only,,current,,Agent Login Session IP Address of the switch
.1.3.6.1.4.1.4526.1.7.1.2.1.1.1.4,GSM7324-SWITCHING-MIB::agentLoginSessionConnectionType,INTEGER,read-only,,current,serial(1):telnet(2),Agent Login Session Connection Type of the switch
.1.3.6.1.4.1.4526.1.7.1.2.1.1.1.5,GSM7324-SWITCHING-MIB::agentLoginSessionIdleTime,TimeTicks,read-only,,current,,Agent Login Session Idle Time of the switch
.1.3.6.1.4.1.4526.1.7.1.2.1.1.1.6,GSM7324-SWITCHING-MIB::agentLoginSessionSessionTime,TimeTicks,read-only,,current,,Agent Login Session Time of the switch
.1.3.6.1.4.1.4526.1.7.1.2.1.1.1.7,GSM7324-SWITCHING-MIB::agentLoginSessionStatus,INTEGER,read-write,,current,active(1):notInService(2):notReady(3):createAndGo(4):createAndWait(5):destroy(6),Status of the user. active(1) - This connection is active. destroy(6) - Set to this value to disconnect this user.
.1.3.6.1.4.1.4526.1.7.1.2.1.2,GSM7324-SWITCHING-MIB::agentTelnetConfigGroup,,,,,,
.1.3.6.1.4.1.4526.1.7.1.2.1.2.1,GSM7324-SWITCHING-MIB::agentTelnetLoginTimeout,Integer32,read-write,,current,,Telnet login timeout (minutes)  Config telnet timeout will set the telnet session timeout value.  A session is active as long as the session has not remained idle for  the value set. Specify a value from 0 to 160.  A value of 0 indicates that a Telnet session remains active indefinitely.  Note: Changing the timeout value for active  sessions does not become effective until the session is reaccessed.  Any keystroke will also activate the new timeout duration.
.1.3.6.1.4.1.4526.1.7.1.2.1.2.2,GSM7324-SWITCHING-MIB::agentTelnetMaxSessions,Integer32,read-write,,current,,Maximum number of Telnet Sessions Config telnet maxsessions is an integer value from 0 to 5 that specifies the maximum number of telnet sessions that can be established.  If the value is 0, no Telnet session can be established.  
.1.3.6.1.4.1.4526.1.7.1.2.1.2.3,GSM7324-SWITCHING-MIB::agentTelnetAllowNewMode,INTEGER,read-write,,current,enable(1):disable(2),Allow new telnet sessions (enable or disable) Config telnet disable means that no new Telnet sessions are to be  established. Any already established session remains active until  the session is ended or an abnormal network error ends it.  
.1.3.6.1.4.1.4526.1.7.1.2.1.3,GSM7324-SWITCHING-MIB::agentUserConfigGroup,,,,,,
.1.3.6.1.4.1.4526.1.7.1.2.1.3.1,GSM7324-SWITCHING-MIB::agentUserConfigCreate,OCTET,read-write,,current,,Create a new user. When set with a non-empty string, a new user with that name will be created. This object will only return an empty string. This string is limited to alpha-numeric strings (uncluding the '-' and '_' characters).
.1.3.6.1.4.1.4526.1.7.1.2.1.3.2,GSM7324-SWITCHING-MIB::agentUserConfigTable,,not-accessible,,current,,User Config Table
.1.3.6.1.4.1.4526.1.7.1.2.1.3.2.1,GSM7324-SWITCHING-MIB::agentUserConfigEntry,,not-accessible,agentUserIndex,current,,User Config Entry
.1.3.6.1.4.1.4526.1.7.1.2.1.3.2.1.1,GSM7324-SWITCHING-MIB::agentUserIndex,Integer32,not-accessible,,current,,Agent User Config Index
.1.3.6.1.4.1.4526.1.7.1.2.1.3.2.1.2,GSM7324-SWITCHING-MIB::agentUserName,OCTET,read-write,,current,,Agent User Name. This string is limited to alpha-numeric strings (including the '-' and '_' characters).
.1.3.6.1.4.1.4526.1.7.1.2.1.3.2.1.3,GSM7324-SWITCHING-MIB::agentUserPassword,OCTET,read-write,,current,,Agent User Password This object will return an empty string even if a password is set.
.1.3.6.1.4.1.4526.1.7.1.2.1.3.2.1.4,GSM7324-SWITCHING-MIB::agentUserAccessMode,INTEGER,read-only,,current,read(1):write(2),Agent User Access Mode
.1.3.6.1.4.1.4526.1.7.1.2.1.3.2.1.5,GSM7324-SWITCHING-MIB::agentUserStatus,INTEGER,read-write,,current,active(1):notInService(2):notReady(3):createAndGo(4):createAndWait(5):destroy(6),Agent User Status. active(1) - This user account is active. destroy(6) - Set to this value to remove this user account.
.1.3.6.1.4.1.4526.1.7.1.2.1.3.2.1.6,GSM7324-SWITCHING-MIB::agentUserAuthenticationType,INTEGER,read-write,,current,none(1):hmacmd5(2):hmacsha(3),SNMPv3 User Authentication. The user passsword must be set to a string greater than or equal to 8 characters for this to be set to anything but none(1).  none(1) - no authentication used hmacmd5(1) - Use HMAC-MD5 authentication hmacsha(1) - Use HMAC-SHA authentication
.1.3.6.1.4.1.4526.1.7.1.2.1.3.2.1.7,GSM7324-SWITCHING-MIB::agentUserEncryptionType,INTEGER,read-write,,current,none(1):des(2),SNMPv3 User Encryption Can not be set to des(2) if agentUserAuthenticationType is set to none(1).  none(1) - no encryption used des(2) - DES encryption used
.1.3.6.1.4.1.4526.1.7.1.2.1.3.2.1.8,GSM7324-SWITCHING-MIB::agentUserEncryptionPassword,OCTET,read-write,,current,,SNMPv3 User Encryption Password This object will return an empty string even if a password is  set. agentUserEncryptionType must be set to des(2) before this object can be configured. This object will return an empty string even if a password is set.
.1.3.6.1.4.1.4526.1.7.1.2.1.5,GSM7324-SWITCHING-MIB::agentSerialGroup,,,,,,
.1.3.6.1.4.1.4526.1.7.1.2.1.5.1,GSM7324-SWITCHING-MIB::agentSerialTimeout,Integer32,read-write,,current,,agentSerialTimeout specifies the maximum connect time(in minutes)  without console activity. A value of 0 indicates that a console can  be connected indefinitely. The time range is 0 to 160. 
.1.3.6.1.4.1.4526.1.7.1.2.1.5.2,GSM7324-SWITCHING-MIB::agentSerialBaudrate,INTEGER,read-write,,current,baud-1200(1):baud-2400(2):baud-4800(3):baud-9600(4):baud-19200(5):baud-38400(6):baud-57600(7):baud-115200(8), agentSerialBaudrate specifies the current baud rate at which  the serial port will try to connect. The available values  are 1200, 2400, 4800, 9600, 19200, 38400,57600, and 115200 baud. 
.1.3.6.1.4.1.4526.1.7.1.2.1.5.3,GSM7324-SWITCHING-MIB::agentSerialCharacterSize,Integer32,read-only,,current,,agentSerialCharacterSize specifies the number of bits in  a character. The number of bits is always 8.
.1.3.6.1.4.1.4526.1.7.1.2.1.5.4,GSM7324-SWITCHING-MIB::agentSerialHWFlowControlMode,INTEGER,read-only,,current,enable(1):disable(2),agentSerialHardwareFlowControl specifies whether hardware  flow-control is enabled or disabled. Hardware Flow Control is  always disabled.
.1.3.6.1.4.1.4526.1.7.1.2.1.5.5,GSM7324-SWITCHING-MIB::agentSerialStopBits,Integer32,read-only,,current,, agentSerialStopBits specifies the number of Stop bits per  character. The number of Stop bits is always 1.
.1.3.6.1.4.1.4526.1.7.1.2.1.5.6,GSM7324-SWITCHING-MIB::agentSerialParityType,INTEGER,read-only,,current,even(1):odd(2):none(3), agentSerialParityType specifies the Parity Method used on  the Serial Port. The Parity Method is always None. 
.1.3.6.1.4.1.4526.1.7.1.2.2,GSM7324-SWITCHING-MIB::agentLagConfigGroup,,,,,,
.1.3.6.1.4.1.4526.1.7.1.2.2.1,GSM7324-SWITCHING-MIB::agentLagConfigCreate,OCTET,read-write,,current,,Agent LAG Create. When this object is set with a non-empty string, a new LAG will be created  if possible with the entered string as its name.
.1.3.6.1.4.1.4526.1.7.1.2.2.2,GSM7324-SWITCHING-MIB::agentLagSummaryConfigTable,,not-accessible,,current,,A summary table of the switch's LAG config entries
.1.3.6.1.4.1.4526.1.7.1.2.2.2.1,GSM7324-SWITCHING-MIB::agentLagSummaryConfigEntry,,not-accessible,agentLagSummaryLagIndex,current,,Switch's LAG config entry
.1.3.6.1.4.1.4526.1.7.1.2.2.2.1.1,GSM7324-SWITCHING-MIB::agentLagSummaryLagIndex,Integer32,read-only,,current,,Agent LAG IfIndex.  This value corresponds with the LAG interface in the ifTable.
.1.3.6.1.4.1.4526.1.7.1.2.2.2.1.2,GSM7324-SWITCHING-MIB::agentLagSummaryName,OCTET,read-write,,current,,Agent LAG Name.  The associated name of the LAG used during creation.
.1.3.6.1.4.1.4526.1.7.1.2.2.2.1.3,GSM7324-SWITCHING-MIB::agentLagSummaryFlushTimer,Integer32,read-write,,obsolete,,Agent LAG FlushTimer.
.1.3.6.1.4.1.4526.1.7.1.2.2.2.1.4,GSM7324-SWITCHING-MIB::agentLagSummaryLinkTrap,INTEGER,read-write,,current,enable(1):disable(2),Agent LAG LinkTrap.  Configures sending Link Up/Down traps when the LAG interface goes Up or Down.
.1.3.6.1.4.1.4526.1.7.1.2.2.2.1.5,GSM7324-SWITCHING-MIB::agentLagSummaryAdminMode,INTEGER,read-write,,current,enable(1):disable(2),Agent LAG AdminMode.  Administratively enables or disables this LAG interface.
.1.3.6.1.4.1.4526.1.7.1.2.2.2.1.6,GSM7324-SWITCHING-MIB::agentLagSummaryStpMode,INTEGER,read-write,,current,dot1d(1):fast(2):off(3):dot1s(4),Agent LAG StpMode  If Dot1d is enabled, the valid values are: dot1d(1), fast(2), and off(3)  If Dot1s is enabled, the valid values are: off(3) and dot1s(4)
.1.3.6.1.4.1.4526.1.7.1.2.2.2.1.7,GSM7324-SWITCHING-MIB::agentLagSummaryAddPort,Integer32,read-write,,current,,Agent LAG AddPort.   Set to a non 0 value to add a port to the LAG. Values correspond to ifIndex values in the ifTable.  Note: agentPortType for the port to be added must be full duplex and the same speed as previously added port(s), if any.
.1.3.6.1.4.1.4526.1.7.1.2.2.2.1.8,GSM7324-SWITCHING-MIB::agentLagSummaryDeletePort,Integer32,read-write,,current,,Agent LAG DeletePort.  Set to a non 0 value to remove a port from the LAG. Values correspond to ifIndex values in the ifTable.
.1.3.6.1.4.1.4526.1.7.1.2.2.2.1.9,GSM7324-SWITCHING-MIB::agentLagSummaryStatus,INTEGER,read-write,,current,active(1):notInService(2):notReady(3):createAndGo(4):createAndWait(5):destroy(6),Agent LAG Status.  active(1) - This LAG is enabled. destroy(6) - Set to this value to remove the LAG.
.1.3.6.1.4.1.4526.1.7.1.2.2.2.1.10,GSM7324-SWITCHING-MIB::agentLagSummaryType,INTEGER,read-only,,current,static(1):dynamic(2),Agent LAG Type.  static(1) - This LAG is staticly maintained. dynamic(2) - This LAG is dynamicly maintained.
.1.3.6.1.4.1.4526.1.7.1.2.2.3,GSM7324-SWITCHING-MIB::agentLagDetailedConfigTable,,not-accessible,,current,,A detailed table of the switch's LAG config entries
.1.3.6.1.4.1.4526.1.7.1.2.2.3.1,GSM7324-SWITCHING-MIB::agentLagDetailedConfigEntry,,not-accessible,agentLagDetailedLagIndex:agentLagDetailedIfIndex,current,,Switch's LAG config entry
.1.3.6.1.4.1.4526.1.7.1.2.2.3.1.1,GSM7324-SWITCHING-MIB::agentLagDetailedLagIndex,Integer32,read-only,,current,,LAG index
.1.3.6.1.4.1.4526.1.7.1.2.2.3.1.2,GSM7324-SWITCHING-MIB::agentLagDetailedIfIndex,Integer32,read-only,,current,,LAG port index
.1.3.6.1.4.1.4526.1.7.1.2.2.3.1.3,GSM7324-SWITCHING-MIB::agentLagDetailedPortSpeed,OBJECT,read-only,,current,,LAG port speed. See agentPortType for a description and list of valid values.
.1.3.6.1.4.1.4526.1.7.1.2.2.3.1.4,GSM7324-SWITCHING-MIB::agentLagDetailedPortStatus,INTEGER,read-only,,current,active(1):inactive(2),LAG port status.  active(1) - Actively participating in the LAG. inactive(2) - Not participating in the LAG.
.1.3.6.1.4.1.4526.1.7.1.2.2.4,GSM7324-SWITCHING-MIB::agentLagConfigStaticCapability,INTEGER,read-write,,current,enable(1):disable(2),Agent LAG Static Capability. Configures whether Static LAGs are supported on this device.
.1.3.6.1.4.1.4526.1.7.1.2.3,GSM7324-SWITCHING-MIB::agentNetworkConfigGroup,,,,,,
.1.3.6.1.4.1.4526.1.7.1.2.3.1,GSM7324-SWITCHING-MIB::agentNetworkIPAddress,IpAddress,read-write,,current,,The switch's network ip address
.1.3.6.1.4.1.4526.1.7.1.2.3.2,GSM7324-SWITCHING-MIB::agentNetworkSubnetMask,IpAddress,read-write,,current,,The switch's network subnet mask
.1.3.6.1.4.1.4526.1.7.1.2.3.3,GSM7324-SWITCHING-MIB::agentNetworkDefaultGateway,IpAddress,read-write,,current,,The switch's network default gateway
.1.3.6.1.4.1.4526.1.7.1.2.3.4,GSM7324-SWITCHING-MIB::agentNetworkBurnedInMacAddress,OCTET,read-only,,current,,The switch's network Burned-In MAC address
.1.3.6.1.4.1.4526.1.7.1.2.3.5,GSM7324-SWITCHING-MIB::agentNetworkConfigProtocol,INTEGER,read-write,,current,none(1):bootp(2):dhcp(3),The switch's network config protocol
.1.3.6.1.4.1.4526.1.7.1.2.3.6,GSM7324-SWITCHING-MIB::agentNetworkWebMode,INTEGER,read-write,,current,enable(1):disable(2),The switch's network config protocol on next bootup
.1.3.6.1.4.1.4526.1.7.1.2.3.7,GSM7324-SWITCHING-MIB::agentNetworkJavaMode,INTEGER,read-write,,current,enable(1):disable(2),Configures the use of the Java interface through the Web.
.1.3.6.1.4.1.4526.1.7.1.2.3.8,GSM7324-SWITCHING-MIB::agentNetworkMgmtVlan,Integer32,read-write,,current,,The VLAN ID through which the switch can be managed using the  agentNetworkIPAddress
.1.3.6.1.4.1.4526.1.7.1.2.4,GSM7324-SWITCHING-MIB::agentServicePortConfigGroup,,,,,,
.1.3.6.1.4.1.4526.1.7.1.2.4.1,GSM7324-SWITCHING-MIB::agentServicePortIPAddress,IpAddress,read-write,,current,,The switch's ServicePort ip address
.1.3.6.1.4.1.4526.1.7.1.2.4.2,GSM7324-SWITCHING-MIB::agentServicePortSubnetMask,IpAddress,read-write,,current,,The switch's ServicePort subnet mask
.1.3.6.1.4.1.4526.1.7.1.2.4.3,GSM7324-SWITCHING-MIB::agentServicePortDefaultGateway,IpAddress,read-write,,current,,The switch's ServicePort default gateway
.1.3.6.1.4.1.4526.1.7.1.2.4.4,GSM7324-SWITCHING-MIB::agentServicePortBurnedInMacAddress,OCTET,read-only,,current,,The switch's ServicePort Burned-In MAC address
.1.3.6.1.4.1.4526.1.7.1.2.4.5,GSM7324-SWITCHING-MIB::agentServicePortConfigProtocol,INTEGER,read-write,,current,none(1):bootp(2):dhcp(3),The switch's ServicePort config protocol
.1.3.6.1.4.1.4526.1.7.1.2.6,GSM7324-SWITCHING-MIB::agentSnmpConfigGroup,,,,,,
.1.3.6.1.4.1.4526.1.7.1.2.6.1,GSM7324-SWITCHING-MIB::agentSnmpCommunityCreate,OCTET,read-write,,current,,Creates a new SNMP Community entry. Defaults: IPAddress 0.0.0.0 IpMask 0.0.0.0 AccessMode read-only Status config
.1.3.6.1.4.1.4526.1.7.1.2.6.2,GSM7324-SWITCHING-MIB::agentSnmpCommunityConfigTable,,not-accessible,,current,,A table of the switch's SNMP Config entries
.1.3.6.1.4.1.4526.1.7.1.2.6.2.1,GSM7324-SWITCHING-MIB::agentSnmpCommunityConfigEntry,,not-accessible,agentSnmpCommunityIndex,current,,Switch's SNMP Config entry
.1.3.6.1.4.1.4526.1.7.1.2.6.2.1.1,GSM7324-SWITCHING-MIB::agentSnmpCommunityIndex,Integer32,read-only,,current,,The switch's Snmp Community Index
.1.3.6.1.4.1.4526.1.7.1.2.6.2.1.2,GSM7324-SWITCHING-MIB::agentSnmpCommunityName,OCTET,read-write,,current,,The switch's Snmp Community Name This name identifies each SNMP community;  the name can be up to 16 characters, and it is case-sensitive. Community names in the SNMP community must be unique.  If you make multiple entries using the same community name,  the first entry is kept and processed and all duplicate entries are ignored.  
.1.3.6.1.4.1.4526.1.7.1.2.6.2.1.3,GSM7324-SWITCHING-MIB::agentSnmpCommunityIPAddress,IpAddress,read-write,,current,,The switch's Snmp Community IP Address Client IP Address - This attribute is an IP address (or portion thereof)  from which this device will accept SNMP packets with the associated  community. The requesting entity's IP address is logical-ANDed with  the Client IP Mask and the result must match the Client IP Address.  Note: If the Client IP Mask is set  to 0.0.0.0, a Client IP Address of 0.0.0.0 matches all IP addresses.  
.1.3.6.1.4.1.4526.1.7.1.2.6.2.1.4,GSM7324-SWITCHING-MIB::agentSnmpCommunityIPMask,IpAddress,read-write,,current,,The switch's Snmp Community IP Mask Client IP Mask - This attribute is a mask to be logical-ANDed with the requesting entity's IP address before comparison with the Client IP Address.  If the result matches with Client IP Address then the address is an  authenticated IP address. For example, if the Client IP Address  is 9.47.128.0 and the corresponding Client IP Mask is 255.255.255.0,  a range of incoming IP addresses would match, that is, the incoming IP  addresses could be a value in the following range: 9.47.128.0 to 9.47.128.255. To have a specific IP address be the only authenticated IP address, set the  Client IP Address to the required IP address and set the Client IP Mask  to 255.255.255.255.  
.1.3.6.1.4.1.4526.1.7.1.2.6.2.1.5,GSM7324-SWITCHING-MIB::agentSnmpCommunityAccessMode,INTEGER,read-write,,current,,The switch's Snmp Community Access Mode Access Mode - This value can be read-only or read/write.  A community with a read-only access allows for switch information to be displayed. A community with a read/write access allows for configuration  changes to be made and for information to be displayed. 
.1.3.6.1.4.1.4526.1.7.1.2.6.2.1.6,GSM7324-SWITCHING-MIB::agentSnmpCommunityStatus,INTEGER,read-write,,current,active(1):notInService(2):config(3):destroy(4),The switch's Snmp Community Status.  active(1) - This community is active, allowing SNMP managers associated  with this community to manage the switch according to its  access right.   notInService(2) - This community is not active; no SNMP requests using this  community will be accepted. In this case the SNMP manager  associated with this community cannot manage the switch until  the Status is changed back to active(1).  config(3) - The community Status must be set to this value in order to  configure it. When creating a new community entry, initial  Status will be set to this value.  destroy(4) - Set to this value to remove the community from the agent.
.1.3.6.1.4.1.4526.1.7.1.2.6.3,GSM7324-SWITCHING-MIB::agentSnmpTrapReceiverCreate,OCTET,read-write,,current,,Creates a new trap receiver entry.  Defaults: IPAddress 0.0.0.0 status config
.1.3.6.1.4.1.4526.1.7.1.2.6.4,GSM7324-SWITCHING-MIB::agentSnmpTrapReceiverConfigTable,,not-accessible,,current,,Trap messages are sent across a network to an SNMP Network Manager.  These messages alert the manager to events occurring within the switch  or on the network. Up to six simultaneous trap receivers are supported.  
.1.3.6.1.4.1.4526.1.7.1.2.6.4.1,GSM7324-SWITCHING-MIB::agentSnmpTrapReceiverConfigEntry,,not-accessible,agentSnmpTrapReceiverIndex,current,,Switch's Snmp Trace Receiver Config entry
.1.3.6.1.4.1.4526.1.7.1.2.6.4.1.1,GSM7324-SWITCHING-MIB::agentSnmpTrapReceiverIndex,Integer32,read-only,,current,,The switch's Snmp Trap Receiver Index
.1.3.6.1.4.1.4526.1.7.1.2.6.4.1.2,GSM7324-SWITCHING-MIB::agentSnmpTrapReceiverCommunityName,OCTET,read-write,,current,,The switch's Snmp Trap Receiver Community Name. This is the SNMP community name of the remote network manager;  the name can be up to 16 characters, and is case-sensitive.  
.1.3.6.1.4.1.4526.1.7.1.2.6.4.1.3,GSM7324-SWITCHING-MIB::agentSnmpTrapReceiverIPAddress,IpAddress,read-write,,current,,IP Address - Each IP address parameter is four integer numbers.  The numbers range from 0 to 255.  
.1.3.6.1.4.1.4526.1.7.1.2.6.4.1.4,GSM7324-SWITCHING-MIB::agentSnmpTrapReceiverStatus,INTEGER,read-write,,current,active(1):notInService(2):config(3):destroy(4),The switch's Snmp Trap Reciever Status. active(1) - This trap receiver is active, allowing SNMP Traps to  be sent to this receiver.   notInService(2) - This trap reciever is not active; no SNMP Traps will  be sent to this reciever until it's set back to active(1).   config(3) - The trap reciever Status must be set to this value in order  to configure it. When creating a new trap receiver entry,  the Status will initially be set to this value. Note: agentSnmpTrapReceiverIPAddress must be set to non-zero before changing to active(1) or notInService(2).  destroy(4) - Set to this value to remove the trap receiver entry from  the agent.
.1.3.6.1.4.1.4526.1.7.1.2.6.5,GSM7324-SWITCHING-MIB::agentSnmpTrapFlagsConfigGroup,,,,,,
.1.3.6.1.4.1.4526.1.7.1.2.6.5.1,GSM7324-SWITCHING-MIB::agentSnmpAuthenticationTrapFlag,INTEGER,read-write,,current,enable(1):disable(2),Authentication Flag - Enable/Disable authentication Flag.
.1.3.6.1.4.1.4526.1.7.1.2.6.5.2,GSM7324-SWITCHING-MIB::agentSnmpLinkUpDownTrapFlag,INTEGER,read-write,,current,enable(1):disable(2),Link Up/Down Flag - Enable/Disable Link Up/Link Down traps for the  entire switch. When set to Enable, the Link Up/Down traps will be  sent only if the Link Trap flag setting associated with the port  (Port Configuration Menu) is set to Enable. 
.1.3.6.1.4.1.4526.1.7.1.2.6.5.3,GSM7324-SWITCHING-MIB::agentSnmpMultipleUsersTrapFlag,INTEGER,read-write,,current,enable(1):disable(2),Multiple Users Flag - Enable/Disable Multiple User traps. When the value is set to Enable, a Multiple User Trap is sent whenever someone logs in  to the terminal interface (EIA 232 or Telnet) and there is already an  existing terminal interface session. 
.1.3.6.1.4.1.4526.1.7.1.2.6.5.4,GSM7324-SWITCHING-MIB::agentSnmpSpanningTreeTrapFlag,INTEGER,read-write,,current,enable(1):disable(2),Spanning Tree Flag - This flag enables the sending of new root traps and  topology change notification traps.
.1.3.6.1.4.1.4526.1.7.1.2.6.5.5,GSM7324-SWITCHING-MIB::agentSnmpBroadcastStormTrapFlag,INTEGER,read-write,,current,enable(1):disable(2),Broadcast Storm Flag - This flag enables or disables the broadcast  storm trap. You must also enable Broadcast Storm Recovery Mode  (see the Switch Configuration Menu). When this  value is set to Enable and Broadcast Storm Recovery mode is set to Enable,  the Broadcast Storm Start/End traps are sent when the switch enters and  leaves Broadcast Storm Recovery. 
.1.3.6.1.4.1.4526.1.7.1.2.7,GSM7324-SWITCHING-MIB::agentSpanningTreeConfigGroup,,,,,,
.1.3.6.1.4.1.4526.1.7.1.2.7.1,GSM7324-SWITCHING-MIB::agentSpanningTreeMode,INTEGER,read-write,,current,enable(1):disable(2),The switch's Spanning Tree Switch Status
.1.3.6.1.4.1.4526.1.7.1.2.8,GSM7324-SWITCHING-MIB::agentSwitchConfigGroup,,,,,,
.1.3.6.1.4.1.4526.1.7.1.2.8.2,GSM7324-SWITCHING-MIB::agentSwitchBroadcastControlMode,INTEGER,read-write,,current,enable(1):disable(2),The switch config broadcast allows you to enable or disable  broadcast storm recovery mode. When you specify Enable for Broadcast  Storm Recovery and the broadcast traffic on any Ethernet port exceeds  20 percent of the link speed, the switch blocks (discards) the broadcast  traffic until the broadcast traffic returns to 10 percent or less. Upper limit for 10M link is 20% and lower limit is 10%.  For 100M link Upper limit is 5% and lower limit is 2%
.1.3.6.1.4.1.4526.1.7.1.2.8.3,GSM7324-SWITCHING-MIB::agentSwitchDot3FlowControlMode,INTEGER,read-write,,current,enable(1):disable(2),Config switchconfig flowcontrol allows you to enable or disable  802.3x flow control for the switch. This value  applies to only full-duplex mode ports. 
.1.3.6.1.4.1.4526.1.7.1.2.8.4,GSM7324-SWITCHING-MIB::agentSwitchAddressAgingTimeoutTable,,not-accessible,,current,,The switch's address aging timeout table
.1.3.6.1.4.1.4526.1.7.1.2.8.4.1,GSM7324-SWITCHING-MIB::agentSwitchAddressAgingTimeoutEntry,,not-accessible,dot1qFdbId,current,,Aging information about a specific Filtering Database.
.1.3.6.1.4.1.4526.1.7.1.2.8.4.1.1,GSM7324-SWITCHING-MIB::agentSwitchAddressAgingTimeout,Integer32,read-write,,current,,The FDB entry's address aging timeout (in seconds)
.1.3.6.1.4.1.4526.1.7.1.2.8.6,GSM7324-SWITCHING-MIB::agentSwitchIGMPSnoopingGroup,,,,,,
.1.3.6.1.4.1.4526.1.7.1.2.8.6.1,GSM7324-SWITCHING-MIB::agentSwitchIGMPSnoopingAdminMode,INTEGER,read-write,,current,enable(1):disable(2),This enables or disables IGMP Snooping on the system. 
.1.3.6.1.4.1.4526.1.7.1.2.8.6.2,GSM7324-SWITCHING-MIB::agentSwitchIGMPSnoopingGroupMembershipInterval,Integer32,read-write,,current,,The amount of time in seconds a switch will wait for a report for a particular group on a particular interface before it deletes the interface from the entry. 
.1.3.6.1.4.1.4526.1.7.1.2.8.6.3,GSM7324-SWITCHING-MIB::agentSwitchIGMPSnoopingMaxResponseTime,Integer32,read-write,,current,,The amount of time in seconds a switch will wait after sending  a query on an interface because it did not receive a report for  a particular group in that interface. This value must be less  than agentSwitchIGMPSnoopingQueryInterval.
.1.3.6.1.4.1.4526.1.7.1.2.8.6.4,GSM7324-SWITCHING-MIB::agentSwitchIGMPSnoopingMRPExpirationTime,Integer32,read-write,,current,,Multicast Router Present Expiration Time. The amount of time in seconds a switch will wait for a query to be received on an interface before the interface is removed from the list of interfaces with mutlticast routers attached. A value of zero indicates an infinite timeout, i.e. the entries in the list will not expire.
.1.3.6.1.4.1.4526.1.7.1.2.8.6.5,GSM7324-SWITCHING-MIB::agentSwitchIGMPSnoopingPortMask,OCTET,read-write,,current,,IGMP Snooping Port Mask.  This allows configuration of IGMP Snooping on selected ports.  IGMP Snooping cannot be enabled on an interface that has routing enabled, or is a member of a LAG. If a port which has IGMP Snooping  enabled becomes enabled for routing, or is enlisted as a member of a  LAG, IGMP Snooping functionality will be disabled on that port. IGMP Snooping functionality will be subsequently be reenabled if routing is disabled or LAG membership is removed from an interface that had previously had IGMP Snooping enabled.  To obtain port numbers from interface numbers, use the objects agentPortDot1dBasePort and agentPortIfIndex in the agentPortConfigTable  table.
.1.3.6.1.4.1.4526.1.7.1.2.8.6.6,GSM7324-SWITCHING-MIB::agentSwitchIGMPSnoopingMulticastControlFramesProcessed,Counter32,read-only,,current,,Multicast Control Frames Processed by CPU. The number of multicast control frames that have been processed by the CPU.
.1.3.6.1.4.1.4526.1.7.1.2.8.7,GSM7324-SWITCHING-MIB::agentSwitchMFDBGroup,,,,,,
.1.3.6.1.4.1.4526.1.7.1.2.8.7.1,GSM7324-SWITCHING-MIB::agentSwitchMFDBTable,,not-accessible,,current,,The Multicast Forwarding Database table
.1.3.6.1.4.1.4526.1.7.1.2.8.7.1.1,GSM7324-SWITCHING-MIB::agentSwitchMFDBEntry,,not-accessible,agentSwitchMFDBVlanId:agentSwitchMFDBMacAddress:agentSwitchMFDBProtocolType,current,,Contains Forwarding and Filtering information per Vlan Index, MAC Address, and  Component User.
.1.3.6.1.4.1.4526.1.7.1.2.8.7.1.1.1,GSM7324-SWITCHING-MIB::agentSwitchMFDBVlanId,Unsigned32,read-only,,current,,Vlan Index for which this entry is associated with.
.1.3.6.1.4.1.4526.1.7.1.2.8.7.1.1.2,GSM7324-SWITCHING-MIB::agentSwitchMFDBMacAddress,OCTET,read-only,,current,,A multicast MAC address for which the switch has forwarding and or  filtering information.
.1.3.6.1.4.1.4526.1.7.1.2.8.7.1.1.3,GSM7324-SWITCHING-MIB::agentSwitchMFDBProtocolType,INTEGER,read-only,,current,static(1):gmrp(2):igmp(3),The component that is responsible for this entry in the Multicast  Forwarding Database.
.1.3.6.1.4.1.4526.1.7.1.2.8.7.1.1.4,GSM7324-SWITCHING-MIB::agentSwitchMFDBType,INTEGER,read-only,,current,static(1):dynamic(2),This displays the type of the entry.   static(1) - Entries configured by the end user dynamic(2) - Entries added as a result of a learning process or protocol
.1.3.6.1.4.1.4526.1.7.1.2.8.7.1.1.5,GSM7324-SWITCHING-MIB::agentSwitchMFDBDescription,OCTET,read-only,,current,,Text description of this multicast table entry.
.1.3.6.1.4.1.4526.1.7.1.2.8.7.1.1.6,GSM7324-SWITCHING-MIB::agentSwitchMFDBForwardingPortMask,OCTET,read-only,,current,,BitMask indicating which ports this entry indicates should be forwarded.  To obtain port numbers from interface numbers, use the objects agentPortDot1dBasePort and agentPortIfIndex in the agentPortConfigTable  table.
.1.3.6.1.4.1.4526.1.7.1.2.8.7.1.1.7,GSM7324-SWITCHING-MIB::agentSwitchMFDBFilteringPortMask,OCTET,read-only,,current,,BitMask indicating which ports this entry indicates should be filtered.  To obtain port numbers from interface numbers, use the objects agentPortDot1dBasePort and agentPortIfIndex in the agentPortConfigTable  table.
.1.3.6.1.4.1.4526.1.7.1.2.8.7.2,GSM7324-SWITCHING-MIB::agentSwitchMFDBSummaryTable,,not-accessible,,current,,The Multicast Forwarding Database Summary table
.1.3.6.1.4.1.4526.1.7.1.2.8.7.2.1,GSM7324-SWITCHING-MIB::agentSwitchMFDBSummaryEntry,,not-accessible,agentSwitchMFDBSummaryVlanId:agentSwitchMFDBSummaryMacAddress,current,,Summarizes the forwarding ports for all components registered for all MFDB table entries with the same Vlan Index and MAC Address.
.1.3.6.1.4.1.4526.1.7.1.2.8.7.2.1.1,GSM7324-SWITCHING-MIB::agentSwitchMFDBSummaryVlanId,Unsigned32,read-only,,current,,Vlan Index for which this entry is associated with.
.1.3.6.1.4.1.4526.1.7.1.2.8.7.2.1.2,GSM7324-SWITCHING-MIB::agentSwitchMFDBSummaryMacAddress,OCTET,read-only,,current,,A multicast MAC address for which the switch has forwarding and or  filtering information.
.1.3.6.1.4.1.4526.1.7.1.2.8.7.2.1.3,GSM7324-SWITCHING-MIB::agentSwitchMFDBSummaryForwardingPortMask,OCTET,read-only,,current,,Port Mask indicating which ports this entry indicates should be forwarded.  To obtain port numbers from interface numbers, use the objects agentPortDot1dBasePort and agentPortIfIndex in the agentPortConfigTable  table.
.1.3.6.1.4.1.4526.1.7.1.2.8.7.3,GSM7324-SWITCHING-MIB::agentSwitchMFDBMaxTableEntries,Gauge32,read-only,,current,,This displays the maximum number of entries that can possibly be in  the Multicast Forwarding Database table.
.1.3.6.1.4.1.4526.1.7.1.2.8.7.4,GSM7324-SWITCHING-MIB::agentSwitchMFDBMostEntriesUsed,Gauge32,read-only,,current,,This displays the largest number of entries that have been present  in the Multicast Forwarding Database table. This value is also known  as the MFDB high-water mark.
.1.3.6.1.4.1.4526.1.7.1.2.8.7.5,GSM7324-SWITCHING-MIB::agentSwitchMFDBCurrentEntries,Gauge32,read-only,,current,,This displays the current number of entries in the Multicast  Forwarding Database table.
.1.3.6.1.4.1.4526.1.7.1.2.9,GSM7324-SWITCHING-MIB::agentTransferConfigGroup,,,,,,
.1.3.6.1.4.1.4526.1.7.1.2.9.1,GSM7324-SWITCHING-MIB::agentTransferUploadGroup,,,,,,
.1.3.6.1.4.1.4526.1.7.1.2.9.1.1,GSM7324-SWITCHING-MIB::agentTransferUploadMode,INTEGER,read-write,,current,tftp(1):xmodem(2):ymodem(3):zmodem(4),Transfer upload mode configures the mode to use when uploading from the  switch. The mode is either X/Y/ZMODEM or TFTP. X/Y/ZMODEM is valid only when the  file transfer is initiated by the serial EIA 232 port.  
.1.3.6.1.4.1.4526.1.7.1.2.9.1.2,GSM7324-SWITCHING-MIB::agentTransferUploadServerIP,IpAddress,read-write,,current,,Transfer upload tftpserverip configures the IP address of the server  where the file is located. It is valid only when the Transfer Mode is  TFTP. The address is 4 integer bytes ranging from 0 to 255.
.1.3.6.1.4.1.4526.1.7.1.2.9.1.3,GSM7324-SWITCHING-MIB::agentTransferUploadPath,OCTET,read-write,,current,,Transfer upload tftppath configures the directory path where the file is to be uploaded to. The switch remembers the last file path used.  
.1.3.6.1.4.1.4526.1.7.1.2.9.1.4,GSM7324-SWITCHING-MIB::agentTransferUploadFilename,OCTET,read-write,,current,,Transfer upload tftpfilename configures the file name for the file being  uploaded from the switch. It can be up to 32 alphanumeric characters.  The switch remembers the last file name used.  File path can be appended to the file name if the string is less than 17  characters. Otherwise, the File Path field will need to be used and the  File Name will be appended to the File Path as is. An example would be  File Path set to c:\tftp\code\ and File Name set to e1r1v1.opr.  Note: File Name, File Path, and TFTP Server IP Address are applicable  only if the Transfer Mode is TFTP.
.1.3.6.1.4.1.4526.1.7.1.2.9.1.5,GSM7324-SWITCHING-MIB::agentTransferUploadDataType,INTEGER,read-write,,current,config(2):errorlog(3):messagelog(4):traplog(5),Transfer upload datatype configures the type of file to upload from the  switch.  The types for upload are: - Configuration File - Error log - Message log - Trap log 
.1.3.6.1.4.1.4526.1.7.1.2.9.1.6,GSM7324-SWITCHING-MIB::agentTransferUploadStart,INTEGER,read-write,,current,enable(1):disable(2),Transfer upload start will start an upload transfer.  The agentTransferUploadMode object must not be set to xmodem(2),
.1.3.6.1.4.1.4526.1.7.1.2.9.1.7,GSM7324-SWITCHING-MIB::agentTransferUploadStatus,INTEGER,read-only,,current,notInitiated(1):transferStarting(2):errorStarting(3):wrongFileType(4):updatingConfig(5):invalidConfigFile(6):writingToFlash(7):failureWritingToFlash(8):checkingCRC(9):failedCRC(10):unknownDirection(11):transferSuccessful(12):transferFailed(13),Indicates the current status of an upload transfer.
.1.3.6.1.4.1.4526.1.7.1.2.9.2,GSM7324-SWITCHING-MIB::agentTransferDownloadGroup,,,,,,
.1.3.6.1.4.1.4526.1.7.1.2.9.2.1,GSM7324-SWITCHING-MIB::agentTransferDownloadMode,INTEGER,read-write,,current,tftp(1):xmodem(2):ymodem(3):zmodem(4),Transfer download mode configures the mode to use when downloading  to the switch. The mode is either X/Y/ZMODEM or TFTP. X/Y/ZMODEM is valid only  when the file transfer is initiated by the serial EIA 232 port.  
.1.3.6.1.4.1.4526.1.7.1.2.9.2.2,GSM7324-SWITCHING-MIB::agentTransferDownloadServerIP,IpAddress,read-write,,current,,Transfer download tftpserverip configures the IP address of the server  where the file is located. It is valid only when the Transfer Mode is TFTP.  The address is 4 integer bytes ranging from 0 to 255.  
.1.3.6.1.4.1.4526.1.7.1.2.9.2.3,GSM7324-SWITCHING-MIB::agentTransferDownloadPath,OCTET,read-write,,current,,Transfer download tftppath configures the directory path where the  file is located. The switch remembers the last file path used.  
.1.3.6.1.4.1.4526.1.7.1.2.9.2.4,GSM7324-SWITCHING-MIB::agentTransferDownloadFilename,OCTET,read-write,,current,,Transfer download tftpfilename configures the file name for the file  being downloaded to the switch. It can be up to 32 alphanumeric characters.  The switch remembers the last file name used.  File path can be appended to the file name if the string is less than 33  characters. Otherwise, the File Path field will need to be used and the  File Name will be appended to the File Path as is. An example would be  File Path set to c:\tftp\code\ and File Name set to e1r1v1.opr.  Note: File Name, File Path, and TFTP Server IP Address are applicable  only if the Transfer Mode is TFTP.
.1.3.6.1.4.1.4526.1.7.1.2.9.2.5,GSM7324-SWITCHING-MIB::agentTransferDownloadDataType,INTEGER,read-write,,current,code(2):config(3):sshkey-rsa1(4):sshkey-rsa2(5):sshkey-dsa(6):sslpem-root(7):sslpem-server(8):sslpem-dhweak(9):sslpem-dhstrong(10),Transfer download datatype configures the type of file to download to  the switch.  The types for download are:  code - Code File config - Configuration File sshkey-rsa1 - SSH-1 RSA Key File sshkey-rsa2 - SSH-2 RSA Key PEM File sshkey-dsa - SSH-2 DSA Key PEM File sslpem-root - SSL Trusted Root Certificate PEM File sslpem-server - SSL Server Certificate PEM File sslpem-dhweak - SSL DH Weak Encryption Parameter PEM File sslpem-dhstrong - SSL DH Strong Encryption Parameter PEM File  Note: SSH Key files can only be downloaded if SSH Server is administratively  disabled, and there are no active SSH sessions. 
.1.3.6.1.4.1.4526.1.7.1.2.9.2.6,GSM7324-SWITCHING-MIB::agentTransferDownloadStart,INTEGER,read-write,,current,enable(1):disable(2),Transfer download start will start an download transfer.  The agentTransferDownloadMode object must not be set to xmodem(2),
.1.3.6.1.4.1.4526.1.7.1.2.9.2.7,GSM7324-SWITCHING-MIB::agentTransferDownloadStatus,INTEGER,read-only,,current,notInitiated(1):transferStarting(2):errorStarting(3):wrongFileType(4):updatingConfig(5):invalidConfigFile(6):writingToFlash(7):failureWritingToFlash(8):checkingCRC(9):failedCRC(10):unknownDirection(11):transferSuccessful(12):transferFailed(13),Indicates the current status of an download transfer.
.1.3.6.1.4.1.4526.1.7.1.2.10,GSM7324-SWITCHING-MIB::agentPortMirroringGroup,,,,,,
.1.3.6.1.4.1.4526.1.7.1.2.10.1,GSM7324-SWITCHING-MIB::agentMirroredPortIfIndex,Integer32,read-write,,current,,IfIndex of the mirrored port
.1.3.6.1.4.1.4526.1.7.1.2.10.2,GSM7324-SWITCHING-MIB::agentProbePortIfIndex,Integer32,read-write,,current,,IfIndex of the probe port
.1.3.6.1.4.1.4526.1.7.1.2.10.3,GSM7324-SWITCHING-MIB::agentPortMirroringMode,INTEGER,read-write,,current,enable(1):disable(2):delete(3),Port mirroring mode:  enable - enable mirroring mode disable - disable mirroring mode delete - clear MirroredPort and Probe Port configuration
.1.3.6.1.4.1.4526.1.7.1.2.12,GSM7324-SWITCHING-MIB::agentDot3adAggPortTable,,not-accessible,,current,,This table provides 802.3ad link aggregation information for each physical port that is not available through the standard MIB.
.1.3.6.1.4.1.4526.1.7.1.2.12.1,GSM7324-SWITCHING-MIB::agentDot3adAggPortEntry,,not-accessible,agentDot3adAggPort,current,,Information about a table entry. The agentDot3adAggPort identifies the external interface number of the port.
.1.3.6.1.4.1.4526.1.7.1.2.12.1.1,GSM7324-SWITCHING-MIB::agentDot3adAggPort,Integer32,read-only,,current,,ifIndex of this physical port
.1.3.6.1.4.1.4526.1.7.1.2.12.1.2,GSM7324-SWITCHING-MIB::agentDot3adAggPortLACPMode,INTEGER,read-write,,current,enable(1):disable(2),Enable/disable 802.3ad LACP on this port
.1.3.6.1.4.1.4526.1.7.1.2.13,GSM7324-SWITCHING-MIB::agentPortConfigTable,,not-accessible,,current,,A table of the switch's physical port config entries
.1.3.6.1.4.1.4526.1.7.1.2.13.1,GSM7324-SWITCHING-MIB::agentPortConfigEntry,,not-accessible,agentPortDot1dBasePort,current,,Switch's physical port config entry
.1.3.6.1.4.1.4526.1.7.1.2.13.1.1,GSM7324-SWITCHING-MIB::agentPortDot1dBasePort,Integer32,read-only,,current,,The port number of this port.
.1.3.6.1.4.1.4526.1.7.1.2.13.1.2,GSM7324-SWITCHING-MIB::agentPortIfIndex,Integer32,read-only,,current,,The switch's Port IfIndex
.1.3.6.1.4.1.4526.1.7.1.2.13.1.3,GSM7324-SWITCHING-MIB::agentPortIanaType,INTEGER,read-only,,current,other(1):regular1822(2):hdh1822(3):ddnX25(4):rfc877x25(5):ethernetCsmacd(6):iso88023Csmacd(7):iso88024TokenBus(8):iso88025TokenRing(9):iso88026Man(10):starLan(11):proteon10Mbit(12):proteon80Mbit(13):hyperchannel(14):fddi(15):lapb(16):sdlc(17):ds1(18):e1(19):basicISDN(20):primaryISDN(21):propPointToPointSerial(22):ppp(23):softwareLoopback(24):eon(25):ethernet3Mbit(26):nsip(27):slip(28):ultra(29):ds3(30):sip(31):frameRelay(32):rs232(33):para(34):arcnet(35):arcnetPlus(36):atm(37):miox25(38):sonet(39):x25ple(40):iso88022llc(41):localTalk(42):smdsDxi(43):frameRelayService(44):v35(45):hssi(46):hippi(47):modem(48):aal5(49):sonetPath(50):sonetVT(51):smdsIcip(52):propVirtual(53):propMultiplexor(54):ieee80212(55):fibreChannel(56):hippiInterface(57):frameRelayInterconnect(58):aflane8023(59):aflane8025(60):cctEmul(61):fastEther(62):isdn(63):v11(64):v36(65):g703at64k(66):g703at2mb(67):qllc(68):fastEtherFX(69):channel(70):ieee80211(71):ibm370parChan(72):escon(73):dlsw(74):isdns(75):isdnu(76):lapd(77):ipSwitch(78):rsrb(79):atmLogical(80):ds0(81):ds0Bundle(82):bsc(83):async(84):cnr(85):iso88025Dtr(86):eplrs(87):arap(88):propCnls(89):hostPad(90):termPad(91):frameRelayMPI(92):x213(93):adsl(94):radsl(95):sdsl(96):vdsl(97):iso88025CRFPInt(98):myrinet(99):voiceEM(100):voiceFXO(101):voiceFXS(102):voiceEncap(103):voiceOverIp(104):atmDxi(105):atmFuni(106):atmIma(107):pppMultilinkBundle(108):ipOverCdlc(109):ipOverClaw(110):stackToStack(111):virtualIpAddress(112):mpc(113):ipOverAtm(114):iso88025Fiber(115):tdlc(116):gigabitEthernet(117):hdlc(118):lapf(119):v37(120):x25mlp(121):x25huntGroup(122):transpHdlc(123):interleave(124):fast(125):ip(126):docsCableMaclayer(127):docsCableDownstream(128):docsCableUpstream(129):a12MppSwitch(130):tunnel(131):coffee(132):ces(133):atmSubInterface(134):l2vlan(135):l3ipvlan(136):l3ipxvlan(137):digitalPowerline(138):mediaMailOverIp(139):dtm(140):dcn(141):ipForward(142):msdsl(143):ieee1394(144):if-gsn(145):dvbRccMacLayer(146):dvbRccDownstream(147):dvbRccUpstream(148):atmVirtual(149):mplsTunnel(150):srp(151):voiceOverAtm(152):voiceOverFrameRelay(153):idsl(154):compositeLink(155):ss7SigLink(156):propWirelessP2P(157):frForward(158):rfc1483(159):usb(160):ieee8023adLag(161):bgppolicyaccounting(162):frf16MfrBundle(163):h323Gatekeeper(164):h323Proxy(165):mpls(166):mfSigLink(167):hdsl2(168):shdsl(169):ds1FDL(170):pos(171):dvbAsiIn(172):dvbAsiOut(173):plc(174):nfas(175):tr008(176):gr303RDT(177):gr303IDT(178):isup(179):propDocsWirelessMaclayer(180):propDocsWirelessDownstream(181):propDocsWirelessUpstream(182):hiperlan2(183):propBWAp2Mp(184):sonetOverheadChannel(185):digitalWrapperOverheadChannel(186):aal2(187):radioMAC(188):atmRadio(189):imt(190):mvl(191):reachDSL(192):frDlciEndPt(193):atmVciEndPt(194):opticalChannel(195):opticalTransport(196):propAtm(197):voiceOverCable(198):infiniband(199):teLink(200):q2931(201):virtualTg(202):sipTg(203):sipSig(204):docsCableUpstreamChannel(205):econet(206):pon155(207):pon622(208):bridge(209):linegroup(210):voiceEMFGD(211):voiceFGDEANA(212):voiceDID(213):mpegTransport(214):sixToFour(215):gtp(216):pdnEtherLoop1(217):pdnEtherLoop2(218):opticalChannelGroup(219):homepna(220):gfp(221):ciscoISLvlan(222):actelisMetaLOOP(223):fcipLink(224):rpr(225):qam(226):lmp(227):cblVectaStar(228):docsCableMCmtsDownstream(229):adsl2(230):macSecControlledIF(231):macSecUncontrolledIF(232):aviciOpticalEther(233):atmbond(234):voiceFGDOS(235):mocaVersion1(236):ieee80216WMAN(237):adsl2plus(238):dvbRcsMacLayer(239):dvbTdm(240):dvbRcsTdma(241):x86Laps(242):wwanPP(243):wwanPP2(244):voiceEBS(245):ifPwType(246):ilan(247):pip(248):aluELP(249):gpon(250):vdsl2(251):capwapDot11Profile(252):capwapDot11Bss(253):capwapWtpVirtualRadio(254):bits(255):docsCableUpstreamRfPort(256):cableDownstreamRfPort(257):vmwareVirtualNic(258):ieee802154(259):otnOdu(260):otnOtu(261):ifVfiType(262):g9981(263):g9982(264):g9983(265):aluEpon(266):aluEponOnu(267):aluEponPhysicalUni(268):aluEponLogicalLink(269):aluGponOnu(270):aluGponPhysicalUni(271):vmwareNicTeam(272):docsOfdmDownstream(277):docsOfdmaUpstream(278):gfast(279):sdci(280):xboxWireless(281):fastdsl(282):docsCableScte55d1FwdOob(283):docsCableScte55d1RetOob(284):docsCableScte55d2DsOob(285):docsCableScte55d2UsOob(286):docsCableNdf(287):docsCableNdr(288):ptm(289):ghn(290):otnOtsi(291):otnOtuc(292):otnOduc(293):otnOtsig(294):microwaveCarrierTermination(295):microwaveRadioLinkTerminal(296),The switch's Port Type
.1.3.6.1.4.1.4526.1.7.1.2.13.1.4,GSM7324-SWITCHING-MIB::agentPortSTPMode,INTEGER,read-write,,current,dot1d(1):fast(2):off(3),The switch's Port Spanning Tree Protocol Mode STP mode values are:   dot1d (the default)  fast, indicates you want to use the fast spanning tree mode off, indicates the STP mode is turned off for a particular port This object is only supported when the Dot1d Protocol is enabled.
.1.3.6.1.4.1.4526.1.7.1.2.13.1.5,GSM7324-SWITCHING-MIB::agentPortSTPState,INTEGER,read-only,,current,blocking(1):listening(2):learning(3):forwarding(4):disabled(5),The switch's Port Spanning Tree Protocol State. This object is only supported when the Dot1d Protocol is enabled.
.1.3.6.1.4.1.4526.1.7.1.2.13.1.6,GSM7324-SWITCHING-MIB::agentPortAdminMode,INTEGER,read-write,,current,enable(1):disable(2),The switch's Port Admin Mode
.1.3.6.1.4.1.4526.1.7.1.2.13.1.7,GSM7324-SWITCHING-MIB::agentPortPhysicalMode,INTEGER,read-write,,obsolete,auto-negotiate(1):half-10(2):full-10(3):half-100(4):full-100(5):half-100fx(6):full-100fx(7):full-1000sx(8),The switch's Port Speed Mode. This is the configured physical mode. This object is read-only for gigabit ports
.1.3.6.1.4.1.4526.1.7.1.2.13.1.8,GSM7324-SWITCHING-MIB::agentPortPhysicalStatus,INTEGER,read-only,,obsolete,auto-negotiate(1):half-10(2):full-10(3):half-100(4):full-100(5):half-100fx(6):full-100fx(7):full-1000sx(8),The switch's Port Physical Speed Status. This is the current actual speed.
.1.3.6.1.4.1.4526.1.7.1.2.13.1.9,GSM7324-SWITCHING-MIB::agentPortLinkTrapMode,INTEGER,read-write,,current,enable(1):disable(2),If enabled, link up and link down traps will be sent for this port.
.1.3.6.1.4.1.4526.1.7.1.2.13.1.10,GSM7324-SWITCHING-MIB::agentPortClearStats,INTEGER,read-write,,current,enable(1):disable(2),clear stats for this port only
.1.3.6.1.4.1.4526.1.7.1.2.13.1.11,GSM7324-SWITCHING-MIB::agentPortDefaultType,OBJECT,read-write,,current,,This object identifies the default administrative port type, to be used in conjunction with the operational port type denoted by agentPortType.  The set of possible values for this object is the same as the set defined for the agentPortType object. This object represents the administratively-configured type of the MAU. If auto-negotiation is not enabled or is not implemented for this MAU, the value of this object determines the operational type of the MAU. In this case, a set to this object will force the MAU into the specified operating mode. If auto-negotiation is implemented and enabled for this MAU, the operational type of the MAU is determined by auto-negotiation, and the value of this object denotes the type to which the MAU will automatically revert if/when auto-negotiation is later disabled.  The valid values for this object are:  dot3MauType10BaseTHD dot3MauType10BaseTFD dot3MauType100BaseTXHD dot3MauType100BaseTXFD dot3MauType100BaseFXFD dot3MauType1000BaseSXFD
.1.3.6.1.4.1.4526.1.7.1.2.13.1.12,GSM7324-SWITCHING-MIB::agentPortType,OBJECT,read-only,,current,,This object identifies the port type. An initial set of MAU types are defined in RFC 2668. The assignment of OBJECT IDENTIFIERs to new types of MAUs is managed by the IANA. If the MAU type is unknown, the object identifier unknownMauType OBJECT IDENTIFIER ::= { 0 0 } is returned. Note that unknownMauType is a syntactically valid object identifier, and any conformant implementation of ASN.1 and the BER must be able to generate and recognize this value. This object represents the operational type of the MAU, as determined by either (1) the result of the auto-negotiation function or (2) if auto-negotiation is not enabled or is not implemented for this MAU, by the value of the object agentPortDefaultType, or (3) for the GigE card a value determined by the GBIC connected to the card. In case (2), a set to the object agentPortDefaultType will force the MAU into the new operating mode.  The valid values for this object are:  dot3MauType10BaseTHD dot3MauType10BaseTFD dot3MauType100BaseTXHD dot3MauType100BaseTXFD dot3MauType100BaseFXFD dot3MauType1000BaseSXFD dot3MauType1000BaseTFD
.1.3.6.1.4.1.4526.1.7.1.2.13.1.13,GSM7324-SWITCHING-MIB::agentPortAutoNegAdminStatus,INTEGER,read-write,,current,enable(1):disable(2),This object identifies the administration status of auto negotiation for this port.
.1.3.6.1.4.1.4526.1.7.1.2.13.1.14,GSM7324-SWITCHING-MIB::agentPortDot3FlowControlMode,INTEGER,read-write,,current,enable(1):disable(2),Config flowcontrol allows you to enable or disable  802.3x flow control for this port. This value  applies to only full-duplex mode ports. 
.1.3.6.1.4.1.4526.1.7.1.2.13.1.15,GSM7324-SWITCHING-MIB::agentPortDVlanTagMode,INTEGER,read-write,,current,enable(1):disable(2),Controls the Double Vlan Tag mode on this port.
.1.3.6.1.4.1.4526.1.7.1.2.13.1.16,GSM7324-SWITCHING-MIB::agentPortDVlanTagEthertype,Integer32,read-write,,current,,Configures the Ethertype for the Double Vlan Tag for this port.  Commonly used are the Ethertypes for vman tags (34984, or 0x88A8)  and dot1q tags (33024, or 0x8100).
.1.3.6.1.4.1.4526.1.7.1.2.13.1.17,GSM7324-SWITCHING-MIB::agentPortDVlanTagCustomerId,Integer32,read-write,,current,,Configures the Customer ID for the Double Vlan Tag for this port.
.1.3.6.1.4.1.4526.1.7.1.2.13.1.18,GSM7324-SWITCHING-MIB::agentPortMaxFrameSizeLimit,Integer32,read-only,,current,,This object identifies the largest value that can be configured for agentPortMaxFrameSize
.1.3.6.1.4.1.4526.1.7.1.2.13.1.19,GSM7324-SWITCHING-MIB::agentPortMaxFrameSize,Integer32,read-write,,current,,This object identifies the currently configured maximum frame size value for this port. The maximmum value that this object can be set to is the value of agentPortMaxFrameSizeLimit. For Ethernet ports which support 802.1Q vlan tagging, the minimum value that this object can be set to is 1522
.1.3.6.1.4.1.4526.1.7.1.2.14,GSM7324-SWITCHING-MIB::agentProtocolConfigGroup,,,,,,
.1.3.6.1.4.1.4526.1.7.1.2.14.1,GSM7324-SWITCHING-MIB::agentProtocolGroupCreate,OCTET,read-write,,current,,Set to non-empty string to create a Protocol-Based VLAN group.
.1.3.6.1.4.1.4526.1.7.1.2.14.2,GSM7324-SWITCHING-MIB::agentProtocolGroupTable,,not-accessible,,current,,A table of the switch's Protocol-based VLAN entries
.1.3.6.1.4.1.4526.1.7.1.2.14.2.1,GSM7324-SWITCHING-MIB::agentProtocolGroupEntry,,not-accessible,agentProtocolGroupId,current,,Switch's Protocol-based VLAN entry
.1.3.6.1.4.1.4526.1.7.1.2.14.2.1.1,GSM7324-SWITCHING-MIB::agentProtocolGroupId,Integer32,read-only,,current,,Group identifier of the Protocol-based VLAN entry.
.1.3.6.1.4.1.4526.1.7.1.2.14.2.1.2,GSM7324-SWITCHING-MIB::agentProtocolGroupName,OCTET,read-only,,current,,Group name of the Protocol-based VLAN entry.
.1.3.6.1.4.1.4526.1.7.1.2.14.2.1.3,GSM7324-SWITCHING-MIB::agentProtocolGroupVlanId,Integer32,read-write,,current,,VLAN associated with the Protocol-based VLAN entry. Set to 0 to remove.
.1.3.6.1.4.1.4526.1.7.1.2.14.2.1.4,GSM7324-SWITCHING-MIB::agentProtocolGroupProtocolIP,INTEGER,read-write,,current,enable(1):disable(2),The status of the IP protocol association with the Protocol-based VLAN entry.
.1.3.6.1.4.1.4526.1.7.1.2.14.2.1.5,GSM7324-SWITCHING-MIB::agentProtocolGroupProtocolARP,INTEGER,read-write,,current,enable(1):disable(2),The status of the ARP protocol association with the Protocol-based VLAN entry.
.1.3.6.1.4.1.4526.1.7.1.2.14.2.1.6,GSM7324-SWITCHING-MIB::agentProtocolGroupProtocolIPX,INTEGER,read-write,,current,enable(1):disable(2),The status of the IPX protocol association with the Protocol-based VLAN entry.
.1.3.6.1.4.1.4526.1.7.1.2.14.2.1.7,GSM7324-SWITCHING-MIB::agentProtocolGroupStatus,INTEGER,read-write,,current,active(1):notInService(2):notReady(3):createAndGo(4):createAndWait(5):destroy(6),The status of the Protocol-based VLAN entry.  active(1) - this entry is active destroy(6) - remove this entry
.1.3.6.1.4.1.4526.1.7.1.2.14.3,GSM7324-SWITCHING-MIB::agentProtocolGroupPortTable,,not-accessible,,current,,A table of the switch's physical port config entries
.1.3.6.1.4.1.4526.1.7.1.2.14.3.1,GSM7324-SWITCHING-MIB::agentProtocolGroupPortEntry,,not-accessible,agentProtocolGroupId:agentProtocolGroupPortIfIndex,current,,Switch's physical port config entry
.1.3.6.1.4.1.4526.1.7.1.2.14.3.1.1,GSM7324-SWITCHING-MIB::agentProtocolGroupPortIfIndex,Integer32,read-only,,current,,The interface number of this instance.
.1.3.6.1.4.1.4526.1.7.1.2.14.3.1.2,GSM7324-SWITCHING-MIB::agentProtocolGroupPortStatus,INTEGER,read-create,,current,active(1):notInService(2):notReady(3):createAndGo(4):createAndWait(5):destroy(6),The status of this entry.  active(1) - the port is associated with this group createAndGo(4) - add the port to this group createAndWait(5) - add the port to this group destroy(6) - remove the port from this group
.1.3.6.1.4.1.4526.1.7.1.2.15,GSM7324-SWITCHING-MIB::agentStpSwitchConfigGroup,,,,,,
.1.3.6.1.4.1.4526.1.7.1.2.15.1,GSM7324-SWITCHING-MIB::agentStpConfigDigestKey,OCTET,read-only,,current,,The MST configuration digest key.
.1.3.6.1.4.1.4526.1.7.1.2.15.2,GSM7324-SWITCHING-MIB::agentStpConfigFormatSelector,Unsigned32,read-only,,current,,The MST configuration format selector. A value other than 0 (zero)  indicates non-support for the IEEE 802.1s standard.
.1.3.6.1.4.1.4526.1.7.1.2.15.3,GSM7324-SWITCHING-MIB::agentStpConfigName,OCTET,read-write,,current,,The MST configuration name of at most 32 characters.
.1.3.6.1.4.1.4526.1.7.1.2.15.4,GSM7324-SWITCHING-MIB::agentStpConfigRevision,Unsigned32,read-write,,current,,The MST configuration revision. The default value is 1.
.1.3.6.1.4.1.4526.1.7.1.2.15.5,GSM7324-SWITCHING-MIB::agentStpForceVersion,INTEGER,read-write,,current,dot1d(1):dot1w(2):dot1s(3),The MST configuration force protocol version. The default version is dot1s.
.1.3.6.1.4.1.4526.1.7.1.2.15.6,GSM7324-SWITCHING-MIB::agentStpAdminMode,INTEGER,read-write,,current,enable(1):disable(2),The spanning tree operational status.  enable(1) - enables spanning tree operational status on the switch. disable(2) - disables spanning tree operational status on the switch.  The default status is disabled.
.1.3.6.1.4.1.4526.1.7.1.2.15.7,GSM7324-SWITCHING-MIB::agentStpPortTable,,not-accessible,,current,,STP port table.
.1.3.6.1.4.1.4526.1.7.1.2.15.7.1,GSM7324-SWITCHING-MIB::agentStpPortEntry,,not-accessible,ifIndex,current,,STP port entry.
.1.3.6.1.4.1.4526.1.7.1.2.15.7.1.1,GSM7324-SWITCHING-MIB::agentStpPortState,INTEGER,read-write,,current,enable(1):disable(2),The administrative bridge port state.  enable(1) - enables the port. disable(2) - disables the port.  The default port state is enabled for the first 4095 ports and  disabled for any ports beyond.
.1.3.6.1.4.1.4526.1.7.1.2.15.7.1.2,GSM7324-SWITCHING-MIB::agentStpPortStatsMstpBpduRx,Counter32,read-only,,current,,The MSTP BPDUs received on a specific port.
.1.3.6.1.4.1.4526.1.7.1.2.15.7.1.3,GSM7324-SWITCHING-MIB::agentStpPortStatsMstpBpduTx,Counter32,read-only,,current,,The MSTP BPDUs sent from a specific port.
.1.3.6.1.4.1.4526.1.7.1.2.15.7.1.4,GSM7324-SWITCHING-MIB::agentStpPortStatsRstpBpduRx,Counter32,read-only,,current,,The RSTP BPDUs received on a specific port.
.1.3.6.1.4.1.4526.1.7.1.2.15.7.1.5,GSM7324-SWITCHING-MIB::agentStpPortStatsRstpBpduTx,Counter32,read-only,,current,,The RSTP BPDUs sent from a specific port.
.1.3.6.1.4.1.4526.1.7.1.2.15.7.1.6,GSM7324-SWITCHING-MIB::agentStpPortStatsStpBpduRx,Counter32,read-only,,current,,The STP BPDUs received on a specific port.
.1.3.6.1.4.1.4526.1.7.1.2.15.7.1.7,GSM7324-SWITCHING-MIB::agentStpPortStatsStpBpduTx,Counter32,read-only,,current,,The STP BPDUs sent from a specific port.
.1.3.6.1.4.1.4526.1.7.1.2.15.7.1.8,GSM7324-SWITCHING-MIB::agentStpPortUpTime,TimeTicks,read-only,,current,,Time since port was reset.  It is displayed in days, hours, minutes, and seconds.
.1.3.6.1.4.1.4526.1.7.1.2.15.7.1.9,GSM7324-SWITCHING-MIB::agentStpPortMigrationCheck,INTEGER,read-write,,current,false(0):true(1),Force the specified port to transmit RSTP or MSTP BPDU's.   Supported values: false(0) - BPDUs are not to be transmitted. true(1) - BPDUs are to be transmitted  A non-zero value indicates that BPDUs are to be sent on the specified port.
.1.3.6.1.4.1.4526.1.7.1.2.15.8,GSM7324-SWITCHING-MIB::agentStpCstConfigGroup,,,,,,
.1.3.6.1.4.1.4526.1.7.1.2.15.8.1,GSM7324-SWITCHING-MIB::agentStpCstHelloTime,Unsigned32,read-only,,current,,The MSTP root port hello time for the CIST.
.1.3.6.1.4.1.4526.1.7.1.2.15.8.2,GSM7324-SWITCHING-MIB::agentStpCstMaxAge,Unsigned32,read-only,,current,,The MSTP root port max age for the CIST.
.1.3.6.1.4.1.4526.1.7.1.2.15.8.3,GSM7324-SWITCHING-MIB::agentStpCstRegionalRootId,OCTET,read-only,,current,,The MSTP regional root identifier for the CIST.
.1.3.6.1.4.1.4526.1.7.1.2.15.8.4,GSM7324-SWITCHING-MIB::agentStpCstRegionalRootPathCost,Unsigned32,read-only,,current,,The MSTP regional root path cost for the CIST.
.1.3.6.1.4.1.4526.1.7.1.2.15.8.5,GSM7324-SWITCHING-MIB::agentStpCstRootFwdDelay,Unsigned32,read-only,,current,,The MSTP root port forward delay for the CIST.
.1.3.6.1.4.1.4526.1.7.1.2.15.8.6,GSM7324-SWITCHING-MIB::agentStpCstBridgeFwdDelay,Unsigned32,read-write,,current,,The MSTP bridge forward delay for the CIST. The default value is 15.
.1.3.6.1.4.1.4526.1.7.1.2.15.8.7,GSM7324-SWITCHING-MIB::agentStpCstBridgeHelloTime,Unsigned32,read-write,,current,,The MSTP bridge hello time for the CIST. The default value is 2.
.1.3.6.1.4.1.4526.1.7.1.2.15.8.8,GSM7324-SWITCHING-MIB::agentStpCstBridgeHoldTime,Unsigned32,read-only,,current,,The MSTP bridge hold time for the CIST.
.1.3.6.1.4.1.4526.1.7.1.2.15.8.9,GSM7324-SWITCHING-MIB::agentStpCstBridgeMaxAge,Unsigned32,read-write,,current,,The MSTP bridge max age for the CIST. The default value is 20.
.1.3.6.1.4.1.4526.1.7.1.2.15.9,GSM7324-SWITCHING-MIB::agentStpCstPortTable,,not-accessible,,current,,CIST port table.
.1.3.6.1.4.1.4526.1.7.1.2.15.9.1,GSM7324-SWITCHING-MIB::agentStpCstPortEntry,,not-accessible,ifIndex,current,,CIST port entry.
.1.3.6.1.4.1.4526.1.7.1.2.15.9.1.1,GSM7324-SWITCHING-MIB::agentStpCstPortOperEdge,INTEGER,read-only,,current,enable(1):disable(2),The MSTP operational status of a specific port for the CIST.
.1.3.6.1.4.1.4526.1.7.1.2.15.9.1.2,GSM7324-SWITCHING-MIB::agentStpCstPortOperPointToPoint,INTEGER,read-only,,current,true(1):false(2),The MSTP operational point to point mac of a specific port for the CIST.
.1.3.6.1.4.1.4526.1.7.1.2.15.9.1.3,GSM7324-SWITCHING-MIB::agentStpCstPortTopologyChangeAck,INTEGER,read-only,,current,true(1):false(2),The MSTP topology change acknowledge for a specific port in the CIST.
.1.3.6.1.4.1.4526.1.7.1.2.15.9.1.4,GSM7324-SWITCHING-MIB::agentStpCstPortEdge,INTEGER,read-write,,current,enable(1):disable(2),The administrative state of a specific port in CIST.  enable(1) - enables the port. disable(2) - disables the port.  The default port state is disabled.
.1.3.6.1.4.1.4526.1.7.1.2.15.9.1.5,GSM7324-SWITCHING-MIB::agentStpCstPortForwardingState,INTEGER,read-only,,current,discarding(1):learning(2):forwarding(3):disabled(4):manualFwd(5):notParticipate(6),The MSTP forwarding state of a specific port in CIST.
.1.3.6.1.4.1.4526.1.7.1.2.15.9.1.6,GSM7324-SWITCHING-MIB::agentStpCstPortId,OCTET,read-only,,current,,The MSTP port identifier of a specific port in CIST.
.1.3.6.1.4.1.4526.1.7.1.2.15.9.1.7,GSM7324-SWITCHING-MIB::agentStpCstPortPathCost,Unsigned32,read-write,,current,,The MSTP port path cost in CIST. The default value will  correspond to the recommendation specified in IEEE 802.1s Table 13-2  which varies depending upon link speed.
.1.3.6.1.4.1.4526.1.7.1.2.15.9.1.8,GSM7324-SWITCHING-MIB::agentStpCstPortPriority,Unsigned32,read-write,,current,,The MSTP port priority in CIST. The priority is  in the increments of 16. The default value is 128.
.1.3.6.1.4.1.4526.1.7.1.2.15.9.1.9,GSM7324-SWITCHING-MIB::agentStpCstDesignatedBridgeId,OCTET,read-only,,current,,The MSTP designated bridge ID of a specific port in CIST.
.1.3.6.1.4.1.4526.1.7.1.2.15.9.1.10,GSM7324-SWITCHING-MIB::agentStpCstDesignatedCost,Unsigned32,read-only,,current,,The MSTP designated cost of a specific port in CIST.
.1.3.6.1.4.1.4526.1.7.1.2.15.9.1.11,GSM7324-SWITCHING-MIB::agentStpCstDesignatedPortId,OCTET,read-only,,current,,The MSTP designated port ID of a specific port in CIST.
.1.3.6.1.4.1.4526.1.7.1.2.15.10,GSM7324-SWITCHING-MIB::agentStpMstTable,,not-accessible,,current,,MST table.
.1.3.6.1.4.1.4526.1.7.1.2.15.10.1,GSM7324-SWITCHING-MIB::agentStpMstEntry,,not-accessible,agentStpMstId,current,,MST entry.
.1.3.6.1.4.1.4526.1.7.1.2.15.10.1.1,GSM7324-SWITCHING-MIB::agentStpMstId,Unsigned32,read-only,,current,,The MSTP instance ID.
.1.3.6.1.4.1.4526.1.7.1.2.15.10.1.2,GSM7324-SWITCHING-MIB::agentStpMstBridgePriority,Unsigned32,read-write,,current,,The MSTP bridge priority in a specific instance. The priority is  in the increments of 4096. The recommended default value is 32768.
.1.3.6.1.4.1.4526.1.7.1.2.15.10.1.3,GSM7324-SWITCHING-MIB::agentStpMstBridgeIdentifier,OCTET,read-only,,current,,The MSTP bridge identifier in a specific instance.
.1.3.6.1.4.1.4526.1.7.1.2.15.10.1.4,GSM7324-SWITCHING-MIB::agentStpMstDesignatedRootId,OCTET,read-only,,current,,The MSTP designated root bridge identifier in a specific instance.
.1.3.6.1.4.1.4526.1.7.1.2.15.10.1.5,GSM7324-SWITCHING-MIB::agentStpMstRootPathCost,Unsigned32,read-only,,current,,The MSTP root path cost in a specific instance.
.1.3.6.1.4.1.4526.1.7.1.2.15.10.1.6,GSM7324-SWITCHING-MIB::agentStpMstRootPortId,OCTET,read-only,,current,,The MSTP root port ID in a specific instance.
.1.3.6.1.4.1.4526.1.7.1.2.15.10.1.7,GSM7324-SWITCHING-MIB::agentStpMstTimeSinceTopologyChange,TimeTicks,read-only,,current,,The MSTP time since the last topology change in a specific instance.
.1.3.6.1.4.1.4526.1.7.1.2.15.10.1.8,GSM7324-SWITCHING-MIB::agentStpMstTopologyChangeCount,Counter32,read-only,,current,,The MSTP count of topology changes in a specific instance.
.1.3.6.1.4.1.4526.1.7.1.2.15.10.1.9,GSM7324-SWITCHING-MIB::agentStpMstTopologyChangeParm,INTEGER,read-only,,current,true(1):false(2),The MSTP topology change parameter in a specific instance.
.1.3.6.1.4.1.4526.1.7.1.2.15.10.1.10,GSM7324-SWITCHING-MIB::agentStpMstRowStatus,INTEGER,read-create,,current,active(1):notInService(2):notReady(3):createAndGo(4):createAndWait(5):destroy(6),The MSTP instance status.  Supported values: active(1) - valid instance. createAndGo(4) - used to create a new instance. destroy(6) - removes an instance.
.1.3.6.1.4.1.4526.1.7.1.2.15.11,GSM7324-SWITCHING-MIB::agentStpMstPortTable,,not-accessible,,current,,MST port table.
.1.3.6.1.4.1.4526.1.7.1.2.15.11.1,GSM7324-SWITCHING-MIB::agentStpMstPortEntry,,not-accessible,agentStpMstId:ifIndex,current,,MST port entry.
.1.3.6.1.4.1.4526.1.7.1.2.15.11.1.1,GSM7324-SWITCHING-MIB::agentStpMstPortForwardingState,INTEGER,read-only,,current,discarding(1):learning(2):forwarding(3):disabled(4):manualFwd(5):notParticipate(6),The MSTP forwarding state of a specific port in a specific instance.
.1.3.6.1.4.1.4526.1.7.1.2.15.11.1.2,GSM7324-SWITCHING-MIB::agentStpMstPortId,OCTET,read-only,,current,,The MSTP port identifier of a specific port in a specific instance.
.1.3.6.1.4.1.4526.1.7.1.2.15.11.1.3,GSM7324-SWITCHING-MIB::agentStpMstPortPathCost,Unsigned32,read-write,,current,,The MSTP port path cost in a specific instance. The default value will  correspond to the recommendation specified in IEEE 802.1s Table 13-2  which varies depending upon link speed.
.1.3.6.1.4.1.4526.1.7.1.2.15.11.1.4,GSM7324-SWITCHING-MIB::agentStpMstPortPriority,Unsigned32,read-write,,current,,The MSTP port priority in a specific instance. The priority is  in the increments of 16. The default value is 128.
.1.3.6.1.4.1.4526.1.7.1.2.15.11.1.5,GSM7324-SWITCHING-MIB::agentStpMstDesignatedBridgeId,OCTET,read-only,,current,,The MSTP designated bridge ID of a specific port in a specific instance.
.1.3.6.1.4.1.4526.1.7.1.2.15.11.1.6,GSM7324-SWITCHING-MIB::agentStpMstDesignatedCost,Unsigned32,read-only,,current,,The MSTP designated cost of a specific port in a specific instance.
.1.3.6.1.4.1.4526.1.7.1.2.15.11.1.7,GSM7324-SWITCHING-MIB::agentStpMstDesignatedPortId,OCTET,read-only,,current,,The MSTP designated port ID of a specific port in a specific instance.
.1.3.6.1.4.1.4526.1.7.1.2.15.12,GSM7324-SWITCHING-MIB::agentStpMstVlanTable,,not-accessible,,current,,MST VLAN table.
.1.3.6.1.4.1.4526.1.7.1.2.15.12.1,GSM7324-SWITCHING-MIB::agentStpMstVlanEntry,,not-accessible,agentStpMstId:dot1qVlanIndex,current,,MST VLAN entry.
.1.3.6.1.4.1.4526.1.7.1.2.15.12.1.1,GSM7324-SWITCHING-MIB::agentStpMstVlanRowStatus,INTEGER,read-create,,current,active(1):notInService(2):notReady(3):createAndGo(4):createAndWait(5):destroy(6),The association status of an MSTP instance and a VLAN.  Supported values: active(1) - valid association between an MSTP instance and a VLAN. createAndGo(4) - used to create a new association between an MSTP instance and a VLAN. destroy(6) - removes the association between an MSTP instance and a VLAN.
.1.3.6.1.4.1.4526.1.7.1.2.16,GSM7324-SWITCHING-MIB::agentAuthenticationGroup,,,,,,
.1.3.6.1.4.1.4526.1.7.1.2.16.1,GSM7324-SWITCHING-MIB::agentAuthenticationListCreate,OCTET,read-write,,current,,Authentication List Create If set to a non empty string, creates a new Authentication List for configuration.
.1.3.6.1.4.1.4526.1.7.1.2.16.2,GSM7324-SWITCHING-MIB::agentAuthenticationListTable,,not-accessible,,current,,MST VLAN table.
.1.3.6.1.4.1.4526.1.7.1.2.16.2.1,GSM7324-SWITCHING-MIB::agentAuthenticationListEntry,,not-accessible,agentAuthenticationListIndex,current,,MST VLAN entry.
.1.3.6.1.4.1.4526.1.7.1.2.16.2.1.1,GSM7324-SWITCHING-MIB::agentAuthenticationListIndex,Unsigned32,not-accessible,,current,,Authenticaiton List Index Unique number used for indexing into this table.
.1.3.6.1.4.1.4526.1.7.1.2.16.2.1.2,GSM7324-SWITCHING-MIB::agentAuthenticationListName,OCTET,read-only,,current,,Authenticaiton List Name Unique name used to identify the Authentication List from other tables.
.1.3.6.1.4.1.4526.1.7.1.2.16.2.1.3,GSM7324-SWITCHING-MIB::agentAuthenticationListMethod1,INTEGER,read-write,,current,local(1):radius(2):reject(3),Authenticion List Method 1 Configures the first authentication method to use when this list is  specified.
.1.3.6.1.4.1.4526.1.7.1.2.16.2.1.4,GSM7324-SWITCHING-MIB::agentAuthenticationListMethod2,INTEGER,read-write,,current,undefined(1):local(2):radius(3):reject(4),Authenticion List Method 2 Configures the second authentication method to use when this list is  specified.
.1.3.6.1.4.1.4526.1.7.1.2.16.2.1.5,GSM7324-SWITCHING-MIB::agentAuthenticationListMethod3,INTEGER,read-write,,current,undefined(1):local(2):radius(3):reject(4),Authenticion List Method 3 Configures the third authentication method to use when this list is  specified.
.1.3.6.1.4.1.4526.1.7.1.2.16.2.1.6,GSM7324-SWITCHING-MIB::agentAuthenticationListStatus,INTEGER,read-write,,current,active(1):notInService(2):notReady(3):createAndGo(4):createAndWait(5):destroy(6),The status of the Authentication List.  Supported values: active(1) - indicates a valid Authenticaiton List destroy(6) - removes the Authentication List.
.1.3.6.1.4.1.4526.1.7.1.2.16.3,GSM7324-SWITCHING-MIB::agentUserConfigDefaultAuthenticationList,OCTET,read-write,,current,,Default Authentication List This object configures which authentication list to use for users which do not have an Authentication List configured. The list  must be configured before setting.
.1.3.6.1.4.1.4526.1.7.1.2.16.4,GSM7324-SWITCHING-MIB::agentUserAuthenticationConfigTable,,not-accessible,,current,,User Authentication Config Table
.1.3.6.1.4.1.4526.1.7.1.2.16.4.1,GSM7324-SWITCHING-MIB::agentUserAuthenticationConfigEntry,,not-accessible,,current,,User Authentication Config Entry
.1.3.6.1.4.1.4526.1.7.1.2.16.4.1.1,GSM7324-SWITCHING-MIB::agentUserAuthenticationList,OCTET,read-write,,current,,User Authentication List This object configures which authentication list to use for this user. The list must be configured before setting.
.1.3.6.1.4.1.4526.1.7.1.2.16.5,GSM7324-SWITCHING-MIB::agentUserPortConfigTable,,not-accessible,,current,,User Port Config Table
.1.3.6.1.4.1.4526.1.7.1.2.16.5.1,GSM7324-SWITCHING-MIB::agentUserPortConfigEntry,,not-accessible,,current,,User Port Config Entry
.1.3.6.1.4.1.4526.1.7.1.2.16.5.1.1,GSM7324-SWITCHING-MIB::agentUserPortSecurity,OCTET,read-write,,current,,User Port Port Security This object configures which ports the user has access to. Ports are indexed based on dot1dBasePort entries in  dot1dBasePortTable.
.1.3.6.1.4.1.4526.1.7.1.2.17,GSM7324-SWITCHING-MIB::agentClassOfServiceGroup,,,,,,
.1.3.6.1.4.1.4526.1.7.1.2.17.1,GSM7324-SWITCHING-MIB::agentClassOfServiceTable,,not-accessible,,current,,A table that contains information about the 802.1p priority mapping to traffic class priority queue for every physical port.
.1.3.6.1.4.1.4526.1.7.1.2.17.1.1,GSM7324-SWITCHING-MIB::agentClassOfServiceEntry,,not-accessible,agentClassOfServicePriority,current,,A 802.1p priority mapped to a traffic class priority queue.
.1.3.6.1.4.1.4526.1.7.1.2.17.1.1.1,GSM7324-SWITCHING-MIB::agentClassOfServicePriority,Integer32,not-accessible,,current,,The Priority value determined for the received frame. This value is equivalent to the priority indicated in the tagged frame received, or one of the evaluated priorities, determined according to the media-type. For untagged frames received from Ethernet media, this value is equal to the dot1dPortDefaultUserPriority value for the ingress port.
.1.3.6.1.4.1.4526.1.7.1.2.17.1.1.2,GSM7324-SWITCHING-MIB::agentClassOfServiceClass,Integer32,read-write,,current,,Traffic class priority queue the received frame is mapped to.
.1.3.6.1.4.1.4526.1.7.1.3,GSM7324-SWITCHING-MIB::agentSystemGroup,,,,,,
.1.3.6.1.4.1.4526.1.7.1.3.1,GSM7324-SWITCHING-MIB::agentSaveConfig,INTEGER,read-write,,current,enable(1):disable(2),Enable agentSaveConfig will initiate an configuration save to nvram. Disable agentSaveConfig after a configuration save will reset  agentSaveConfigStatus back to notInitiated state.
.1.3.6.1.4.1.4526.1.7.1.3.2,GSM7324-SWITCHING-MIB::agentClearConfig,INTEGER,read-write,,current,enable(1):disable(2),clear config to factory defaults
.1.3.6.1.4.1.4526.1.7.1.3.3,GSM7324-SWITCHING-MIB::agentClearLags,INTEGER,read-write,,current,enable(1):disable(2),clear lag configuration
.1.3.6.1.4.1.4526.1.7.1.3.4,GSM7324-SWITCHING-MIB::agentClearLoginSessions,INTEGER,read-write,,current,enable(1):disable(2),close all telnet sessions
.1.3.6.1.4.1.4526.1.7.1.3.5,GSM7324-SWITCHING-MIB::agentClearPasswords,INTEGER,read-write,,current,enable(1):disable(2),reset passwords
.1.3.6.1.4.1.4526.1.7.1.3.6,GSM7324-SWITCHING-MIB::agentClearPortStats,INTEGER,read-write,,current,enable(1):disable(2),clear all port statistics
.1.3.6.1.4.1.4526.1.7.1.3.7,GSM7324-SWITCHING-MIB::agentClearSwitchStats,INTEGER,read-write,,current,enable(1):disable(2),clear all switch statistics
.1.3.6.1.4.1.4526.1.7.1.3.8,GSM7324-SWITCHING-MIB::agentClearTrapLog,INTEGER,read-write,,current,enable(1):disable(2),clear trap log
.1.3.6.1.4.1.4526.1.7.1.3.9,GSM7324-SWITCHING-MIB::agentClearVlan,INTEGER,read-write,,current,enable(1):disable(2),clear vlan entries
.1.3.6.1.4.1.4526.1.7.1.3.10,GSM7324-SWITCHING-MIB::agentResetSystem,INTEGER,read-write,,current,enable(1):disable(2),reset the switch
.1.3.6.1.4.1.4526.1.7.1.3.11,GSM7324-SWITCHING-MIB::agentSaveConfigStatus,INTEGER,read-only,,current,notInitiated(1):savingInProcess(2):savingComplete(3),Indicates the current status of an save configuration request.
.1.3.6.1.4.1.4526.1.7.1.4,GSM7324-SWITCHING-MIB::agentCableTesterGroup,,,,,,
.1.3.6.1.4.1.4526.1.7.1.4.1,GSM7324-SWITCHING-MIB::agentCableTesterStatus,INTEGER,read-write,,current,active(1):success(2):failure(3):uninitialized(4),Status of the Virtual Cable Tester active(1) - cable testing is in progress. Set to this value to start the test. success(2) - A successful test was performed. Cannot be set. failure(3) - A failure was encountered during the test. Cannot be set. uninitialized(4) - No test has been performed yet. Cannot be set.
.1.3.6.1.4.1.4526.1.7.1.4.2,GSM7324-SWITCHING-MIB::agentCableTesterIfIndex,Unsigned32,read-write,,current,,Determines on which port to perform the cable test. Limited to  copper based ports.
.1.3.6.1.4.1.4526.1.7.1.4.3,GSM7324-SWITCHING-MIB::agentCableTesterCableStatus,INTEGER,read-only,,current,normal(1):open(2):short(3):unknown(4),Indicates the results of the Cable Test.   normal(1) - The cable is working correctly. open(2) - The cable is disconnected or there is a faulty connector. short(3) - There is an electrical short in the cable. unknown(4) - No test has been performed yet, or a test is currently in progress.
.1.3.6.1.4.1.4526.1.7.1.4.4,GSM7324-SWITCHING-MIB::agentCableTesterMinimumCableLength,Unsigned32,read-only,,current,,The estimated length of the cable in meters. This value  indicates the shortest length estimated. This object will return 0 if agentCableTesterStatus is not success(2) or the cable length is unknown.
.1.3.6.1.4.1.4526.1.7.1.4.5,GSM7324-SWITCHING-MIB::agentCableTesterMaximumCableLength,Unsigned32,read-only,,current,,The estimated length of the cable in meters. This value  indicates the longest length estimated. This object will return 0 if agentCableTesterStatus is not success(2) or the cable length is unknown.
.1.3.6.1.4.1.4526.1.7.1.4.6,GSM7324-SWITCHING-MIB::agentCableTesterCableFailureLocation,Unsigned32,read-only,,current,,The estimated distance in meters from the end of the cable to the failure location. This object will return 0 if  agentCableTesterStatus is not success(2).
.1.3.6.1.4.1.4526.1.7.1.50,GSM7324-SWITCHING-MIB::gsm7324SwitchingTraps,,,,,,
.1.3.6.1.4.1.4526.1.7.1.50.1,GSM7324-SWITCHING-MIB::multipleUsersTrap,,,,,,trapMgrMultipleUsersLogTrap.
.1.3.6.1.4.1.4526.1.7.1.50.2,GSM7324-SWITCHING-MIB::broadcastStormStartTrap,,,,,,trapMgrBCastStormStartLogTrap.
.1.3.6.1.4.1.4526.1.7.1.50.3,GSM7324-SWITCHING-MIB::broadcastStormEndTrap,,,,,,trapMgrBCastStormEndLogTrap.
.1.3.6.1.4.1.4526.1.7.1.50.4,GSM7324-SWITCHING-MIB::linkFailureTrap,,,,,,trapMgrLinkFailureLogTrap.
.1.3.6.1.4.1.4526.1.7.1.50.5,GSM7324-SWITCHING-MIB::vlanRequestFailureTrap,,,,,,trapMgrVlanRequestFailureLogTrap
.1.3.6.1.4.1.4526.1.7.1.50.6,GSM7324-SWITCHING-MIB::vlanDeleteLastTrap,,,,,,trapMgrLastVlanDeleteLastLogTrap
.1.3.6.1.4.1.4526.1.7.1.50.7,GSM7324-SWITCHING-MIB::vlanDefaultCfgFailureTrap,,,,,,trapMgrDefaultVlanCfgFailureLogTrap
.1.3.6.1.4.1.4526.1.7.1.50.8,GSM7324-SWITCHING-MIB::vlanRestoreFailureTrap,,,,,,trapMgrVlanRestoreFailureLogTrap
.1.3.6.1.4.1.4526.1.7.1.50.9,GSM7324-SWITCHING-MIB::fanFailureTrap,,,,,,trapMgrFanFailureLogTrap.
.1.3.6.1.4.1.4526.1.7.1.50.10,GSM7324-SWITCHING-MIB::stpInstanceNewRootTrap,,,,,,trapMgrStpInstanceNewRootTrap
.1.3.6.1.4.1.4526.1.7.1.50.11,GSM7324-SWITCHING-MIB::stpInstanceTopologyChangeTrap,,,,,,trapMgrStpInstanceTopologyChange
.1.3.6.1.4.1.4526.1.7.1.50.12,GSM7324-SWITCHING-MIB::powerSupplyStatusChangeTrap,,,,,,powerSupplyStatusChangeTrap
.1.3.6.1.4.1.4526.1.7.2,GSM7324-ROUTING-MIB::gsm7324Routing,,,,,,
.1.3.6.1.4.1.4526.1.7.2.1,GSM7324-ROUTING-MIB::agentSwitchArpGroup,,,,,,
.1.3.6.1.4.1.4526.1.7.2.1.1,GSM7324-ROUTING-MIB::agentSwitchArpAgeoutTime,Integer32,read-write,,current,,Configures the ARP entry ageout time in seconds. Allowable range: 15-21600
.1.3.6.1.4.1.4526.1.7.2.1.2,GSM7324-ROUTING-MIB::agentSwitchArpResponseTime,Integer32,read-write,,current,,Configures the ARP request response timeout in seconds. Allowable range: 1-10
.1.3.6.1.4.1.4526.1.7.2.1.3,GSM7324-ROUTING-MIB::agentSwitchArpMaxRetries,Integer32,read-write,,current,,Configures the ARP count of maximum request for retries. Allowable range: 0-10
.1.3.6.1.4.1.4526.1.7.2.1.4,GSM7324-ROUTING-MIB::agentSwitchArpCacheSize,Integer32,read-write,,current,,Configures the ARP maximum number of entries in the cache.
.1.3.6.1.4.1.4526.1.7.2.1.5,GSM7324-ROUTING-MIB::agentSwitchArpDynamicRenew,INTEGER,read-write,,current,enable(1):disable(2),This indicates the current setting of ARP dynamic renew mode. 
.1.3.6.1.4.1.4526.1.7.2.1.6,GSM7324-ROUTING-MIB::agentSwitchArpTotalEntryCountCurrent,Gauge32,read-only,,current,,Current number of entries in the ARP cache.
.1.3.6.1.4.1.4526.1.7.2.1.7,GSM7324-ROUTING-MIB::agentSwitchArpTotalEntryCountPeak,Gauge32,read-only,,current,,Peak number of entries recorded in the ARP cache over
.1.3.6.1.4.1.4526.1.7.2.1.8,GSM7324-ROUTING-MIB::agentSwitchArpStaticEntryCountCurrent,Gauge32,read-only,,current,,Current number of configured static ARP entries.
.1.3.6.1.4.1.4526.1.7.2.1.9,GSM7324-ROUTING-MIB::agentSwitchArpStaticEntryCountMax,Integer32,read-only,,current,,Maximum number of configurable static ARP entries.
.1.3.6.1.4.1.4526.1.7.2.1.10,GSM7324-ROUTING-MIB::agentSwitchArpTable,,not-accessible,,current,,This table augments the MIB-II ipNetToMediaTable by providing per-interface ARP entry information.
.1.3.6.1.4.1.4526.1.7.2.1.10.1,GSM7324-ROUTING-MIB::agentSwitchArpEntry,,not-accessible,agentSwitchArpIpAddress,current,,
.1.3.6.1.4.1.4526.1.7.2.1.10.1.1,GSM7324-ROUTING-MIB::agentSwitchArpAge,TimeTicks,read-only,,current,,This defines the time (in seconds) since the ARP entry 
.1.3.6.1.4.1.4526.1.7.2.1.10.1.2,GSM7324-ROUTING-MIB::agentSwitchArpIpAddress,IpAddress,read-only,,current,,The IP Address assigned to each interface.
.1.3.6.1.4.1.4526.1.7.2.1.10.1.3,GSM7324-ROUTING-MIB::agentSwitchArpMacAddress,OCTET,read-create,,current,,The hardware MAX Address that each interface maps to.
.1.3.6.1.4.1.4526.1.7.2.1.10.1.4,GSM7324-ROUTING-MIB::agentSwitchArpInterface,Integer32,read-only,,current,,The Associated IfIndex which identified the ARP Entry.
.1.3.6.1.4.1.4526.1.7.2.1.10.1.5,GSM7324-ROUTING-MIB::agentSwitchArpType,INTEGER,read-only,,current,local(1):gateway(2):static(3):dynamic(4),The type of ARP entry.
.1.3.6.1.4.1.4526.1.7.2.1.10.1.6,GSM7324-ROUTING-MIB::agentSwitchArpStatus,INTEGER,read-write,,current,active(1):notInService(2):notReady(3):createAndGo(4):createAndWait(5):destroy(6),The status of this ARP entry. Setting this object destroy will remove the entry.
.1.3.6.1.4.1.4526.1.7.2.2,GSM7324-ROUTING-MIB::agentSwitchIpGroup,,,,,,
.1.3.6.1.4.1.4526.1.7.2.2.1,GSM7324-ROUTING-MIB::agentSwitchIpRoutingMode,INTEGER,read-write,,current,enable(1):disable(2),Administratively enables/disables routing on the switch.
.1.3.6.1.4.1.4526.1.7.2.2.3,GSM7324-ROUTING-MIB::agentSwitchIpInterfaceTable,,not-accessible,,current,,
.1.3.6.1.4.1.4526.1.7.2.2.3.1,GSM7324-ROUTING-MIB::agentSwitchIpInterfaceEntry,,not-accessible,agentSwitchIpInterfaceIfIndex,current,,
.1.3.6.1.4.1.4526.1.7.2.2.3.1.1,GSM7324-ROUTING-MIB::agentSwitchIpInterfaceIfIndex,Integer32,read-only,,current,,The IfIndex associated with this instance.
.1.3.6.1.4.1.4526.1.7.2.2.3.1.2,GSM7324-ROUTING-MIB::agentSwitchIpInterfaceIpAddress,IpAddress,read-write,,current,,The IpAddress assigned to this interface. When setting this value, the value of agentSwitchIpInterfaceNetMask must be set at the same time.
.1.3.6.1.4.1.4526.1.7.2.2.3.1.3,GSM7324-ROUTING-MIB::agentSwitchIpInterfaceNetMask,IpAddress,read-write,,current,,The NetMask assigned to this interface. When setting this value, the  value of agentSwitchIpInterfaceIpAddress must be set at the same time.
.1.3.6.1.4.1.4526.1.7.2.2.3.1.4,GSM7324-ROUTING-MIB::agentSwitchIpInterfaceClearIp,INTEGER,read-write,,current,enable(1):disable(2),Sets the interfaces IpAddress and NetMask back to 0.0.0.0
.1.3.6.1.4.1.4526.1.7.2.2.3.1.5,GSM7324-ROUTING-MIB::agentSwitchIpInterfaceRoutingMode,INTEGER,read-write,,current,enable(1):disable(2),Enables or disables routing for this interface.
.1.3.6.1.4.1.4526.1.7.2.2.4,GSM7324-ROUTING-MIB::agentSwitchIpRouterDiscoveryTable,,not-accessible,,current,,There is no global administrative flag for router discovery. The global routing flag (agentSwitchIpRoutingMode) will be used for this purpose. If routing is disabled, router discovery is disabled as well.
.1.3.6.1.4.1.4526.1.7.2.2.4.1,GSM7324-ROUTING-MIB::agentSwitchIpRouterDiscoveryEntry,,not-accessible,agentSwitchIpRouterDiscoveryIfIndex,current,,
.1.3.6.1.4.1.4526.1.7.2.2.4.1.1,GSM7324-ROUTING-MIB::agentSwitchIpRouterDiscoveryIfIndex,Integer32,read-only,,current,,Interface Number to configure Router Discovery on.
.1.3.6.1.4.1.4526.1.7.2.2.4.1.2,GSM7324-ROUTING-MIB::agentSwitchIpRouterDiscoveryAdvertiseMode,INTEGER,read-write,,current,enable(1):disable(2),Enable or disable router discovery on the interface.
.1.3.6.1.4.1.4526.1.7.2.2.4.1.3,GSM7324-ROUTING-MIB::agentSwitchIpRouterDiscoveryMaxAdvertisementInterval,Integer32,read-write,,current,,Maximum time allowed between sending router advertisements  from the interface.
.1.3.6.1.4.1.4526.1.7.2.2.4.1.4,GSM7324-ROUTING-MIB::agentSwitchIpRouterDiscoveryMinAdvertisementInterval,Integer32,read-write,,current,,Minimum time allowed between sending router advertisements from the interface.  This value must be less than or equal to  agentSwitchIpRouterDiscoveryMaxAdvertisementInterval.
.1.3.6.1.4.1.4526.1.7.2.2.4.1.5,GSM7324-ROUTING-MIB::agentSwitchIpRouterDiscoveryAdvertisementLifetime,Integer32,read-write,,current,,Value of lifetime field of router advertsisement sent from  the interface.  This value must be greater than or equal to  agentSwitchIpRouterDiscoveryMaxAdvertisementInterval.
.1.3.6.1.4.1.4526.1.7.2.2.4.1.6,GSM7324-ROUTING-MIB::agentSwitchIpRouterDiscoveryPreferenceLevel,Integer32,read-write,,current,,Preferability of the address as a default router address, related to other addresses on the same subnet. This is defined as the larger the number, the higher the preference.
.1.3.6.1.4.1.4526.1.7.2.2.4.1.7,GSM7324-ROUTING-MIB::agentSwitchIpRouterDiscoveryAdvertisementAddress,IpAddress,read-write,,current,,Address used when sending router advertisements from the interface.
.1.3.6.1.4.1.4526.1.7.2.2.5,GSM7324-ROUTING-MIB::agentSwitchIpVlanTable,,not-accessible,,current,,
.1.3.6.1.4.1.4526.1.7.2.2.5.1,GSM7324-ROUTING-MIB::agentSwitchIpVlanEntry,,not-accessible,agentSwitchIpVlanId,current,,A Static VLAN for which routing can be enabled/disabled
.1.3.6.1.4.1.4526.1.7.2.2.5.1.1,GSM7324-ROUTING-MIB::agentSwitchIpVlanId,Integer32,read-only,,current,,The Vlan's Id.
.1.3.6.1.4.1.4526.1.7.2.2.5.1.2,GSM7324-ROUTING-MIB::agentSwitchIpVlanIfIndex,Integer32,read-only,,current,,The IfIndex associated with this VLAN.
.1.3.6.1.4.1.4526.1.7.2.2.5.1.3,GSM7324-ROUTING-MIB::agentSwitchIpVlanRoutingStatus,INTEGER,read-create,,current,active(1):notInService(2):notReady(3):createAndGo(4):createAndWait(5):destroy(6),Status of Routing mode per Vlan. active(1) - Vlan is enabled for routing createAndGo(4) - Adds Vlan entry for routing destroy(6) - Removes Vlan from routing
.1.3.6.1.4.1.4526.1.7.2.3,GSM7324-ROUTING-MIB::agentRouterRipConfigGroup,,,,,,
.1.3.6.1.4.1.4526.1.7.2.3.1,GSM7324-ROUTING-MIB::agentRouterRipAdminState,INTEGER,read-write,,current,enable(1):disable(2),Sets the administrative mode of RIP in the router.
.1.3.6.1.4.1.4526.1.7.2.3.2,GSM7324-ROUTING-MIB::agentRouterRipSplitHorizonMode,INTEGER,read-write,,current,none(1):simple(2):poisonReverse(3),Sets the RIP split horizon operating mode in the router.
.1.3.6.1.4.1.4526.1.7.2.3.3,GSM7324-ROUTING-MIB::agentRouterRipAutoSummaryMode,INTEGER,read-write,,current,enable(1):disable(2),Sets the RIP auto summarization mode in the router.
.1.3.6.1.4.1.4526.1.7.2.3.4,GSM7324-ROUTING-MIB::agentRouterRipHostRoutesAcceptMode,INTEGER,read-write,,current,enable(1):disable(2),Sets the RIP host route acceptance mode in the router.
.1.3.6.1.4.1.4526.1.7.2.3.5,GSM7324-ROUTING-MIB::agentRouterRipDefaultMetric,Integer32,read-write,,current,,Default metric of redistributed routes, when RIP redistributes  from other protocols.
.1.3.6.1.4.1.4526.1.7.2.3.6,GSM7324-ROUTING-MIB::agentRouterRipDefaultMetricConfigured,,read-write,,current,,Flag to determine whether RIP default-metric is configured or not.
.1.3.6.1.4.1.4526.1.7.2.3.7,GSM7324-ROUTING-MIB::agentRouterRipDefaultInfoOriginate,,read-write,,current,,Flag to determine, whether RIP can advertise a default-route learned from another protocol.
.1.3.6.1.4.1.4526.1.7.2.3.8,GSM7324-ROUTING-MIB::agentRipRouteRedistTable,,not-accessible,,current,,This table contains the MIB objects required to configure  route-redistribution for RIP. Here, RIP is the Destination protocol and the source protocols can be any of : BGP, OSPF, Static, Connected.
.1.3.6.1.4.1.4526.1.7.2.3.8.1,GSM7324-ROUTING-MIB::agentRipRouteRedistEntry,,not-accessible,agentRipRouteRedistSource,current,,
.1.3.6.1.4.1.4526.1.7.2.3.8.1.1,GSM7324-ROUTING-MIB::agentRipRouteRedistSource,INTEGER,read-only,,current,connected(1):static(2):ospf(3):bgp(4),Source route, from which RIP can redistribute routes. This object also acts as the identifier for the  RIP redistribution Table entry.
.1.3.6.1.4.1.4526.1.7.2.3.8.1.2,GSM7324-ROUTING-MIB::agentRipRouteRedistMode,INTEGER,read-write,,current,enable(1):disable(2),User enabels/disables route-redistribution for a particular source protocol.
.1.3.6.1.4.1.4526.1.7.2.3.8.1.3,GSM7324-ROUTING-MIB::agentRipRouteRedistMetric,Integer32,read-write,,current,,Metric used for redistributing a particular source protocol route into RIP.
.1.3.6.1.4.1.4526.1.7.2.3.8.1.4,GSM7324-ROUTING-MIB::agentRipRouteRedistMetricConfigured,,read-write,,current,,Flag to determine whether RIP redistribute-metric is configured or not.
.1.3.6.1.4.1.4526.1.7.2.3.8.1.5,GSM7324-ROUTING-MIB::agentRipRouteRedistMatchInternal,INTEGER,read-write,,current,true(1):false(2):not-applicable(3),If this flag is true, RIP redistributes OSPF internal routes. It will be non-applicable, when source protocol is other than ospf.
.1.3.6.1.4.1.4526.1.7.2.3.8.1.6,GSM7324-ROUTING-MIB::agentRipRouteRedistMatchExternal1,INTEGER,read-write,,current,true(1):false(2):not-applicable(3),If this flag is true, RIP redistributes OSPF External1 routes. It will be non-applicable, when source protocol is other than ospf.
.1.3.6.1.4.1.4526.1.7.2.3.8.1.7,GSM7324-ROUTING-MIB::agentRipRouteRedistMatchExternal2,INTEGER,read-write,,current,true(1):false(2):not-applicable(3),If this flag is true, RIP redistributes OSPF External2 routes. It will be non-applicable, when source protocol is other than ospf.
.1.3.6.1.4.1.4526.1.7.2.3.8.1.8,GSM7324-ROUTING-MIB::agentRipRouteRedistMatchNSSAExternal1,INTEGER,read-write,,current,true(1):false(2):not-applicable(3),If this flag is true, RIP redistributes OSPF NSSA-External1 routes. It will be non-applicable, when source protocol is other than ospf.
.1.3.6.1.4.1.4526.1.7.2.3.8.1.9,GSM7324-ROUTING-MIB::agentRipRouteRedistMatchNSSAExternal2,INTEGER,read-write,,current,true(1):false(2):not-applicable(3),If this flag is true, RIP redistributes OSPF NSSA-External2 routes. It will be non-applicable, when source protocol is other than ospf.
.1.3.6.1.4.1.4526.1.7.2.3.8.1.10,GSM7324-ROUTING-MIB::agentRipRouteRedistDistList,Unsigned32,read-write,,current,,Access-list number of the access-list, which filters routes received from a source-protocol.
.1.3.6.1.4.1.4526.1.7.2.3.8.1.11,GSM7324-ROUTING-MIB::agentRipRouteRedistDistListConfigured,,read-write,,current,,Flag to determine whether Access-list is configured or not.
.1.3.6.1.4.1.4526.1.7.2.3.9,GSM7324-ROUTING-MIB::agentRip2IfConfTable,,not-accessible,,current,,A list of subnets which require separate configuration in RIP. Augments rip2IfConfTable
.1.3.6.1.4.1.4526.1.7.2.3.9.1,GSM7324-ROUTING-MIB::agentRip2IfConfEntry,,not-accessible,,current,,A Single Routing Domain in a single Subnet.
.1.3.6.1.4.1.4526.1.7.2.3.9.1.1,GSM7324-ROUTING-MIB::agentRip2IfConfAuthKeyId,INTEGER,read-create,,current,,The identifier for the authentication key used on this interface. This field is only meaningful  when the RIPv2-MIB rip2IfConfAuthType is md5(3); 
.1.3.6.1.4.1.4526.1.7.2.4,GSM7324-ROUTING-MIB::agentRouterOspfConfigGroup,,,,,,
.1.3.6.1.4.1.4526.1.7.2.4.1,GSM7324-ROUTING-MIB::agentOspfDefaultMetric,Integer32,read-write,,current,,Default metric of redistributed routes, when OSPF redistributes  from other protocols.
.1.3.6.1.4.1.4526.1.7.2.4.2,GSM7324-ROUTING-MIB::agentOspfDefaultMetricConfigured,,read-write,,current,,Flag to determine whether OSPF default-metric is configured or not.
.1.3.6.1.4.1.4526.1.7.2.4.3,GSM7324-ROUTING-MIB::agentOspfDefaultInfoOriginate,,read-write,,current,,Flag to determine, whether OSPF can advertise a default-route learned from another protocol.
.1.3.6.1.4.1.4526.1.7.2.4.4,GSM7324-ROUTING-MIB::agentOspfDefaultInfoOriginateAlways,,read-write,,current,,When this flag is true, the router advertises 0.0.0.0/0.0.0.0 always. Without this option, OSPF will only advertise 0.0.0.0/0.0.0.0 if the router's forwarding table contains a default route.
.1.3.6.1.4.1.4526.1.7.2.4.5,GSM7324-ROUTING-MIB::agentOspfDefaultInfoOriginateMetric,Integer32,read-write,,current,,Metric of the default route,which OSPF advertises when learned from other protocol.
.1.3.6.1.4.1.4526.1.7.2.4.6,GSM7324-ROUTING-MIB::agentOspfDefaultInfoOriginateMetricConfigured,,read-write,,current,,Flag to determine whether OSPF default-info originate metric  is configured or not.
.1.3.6.1.4.1.4526.1.7.2.4.7,GSM7324-ROUTING-MIB::agentOspfDefaultInfoOriginateMetricType,INTEGER,read-write,,current,externalType1(1):externalType2(2),Metric Type of the default route,which OSPF advertises when learned from other protocol. It can be 1(external type 1) or 2(external type 2).
.1.3.6.1.4.1.4526.1.7.2.4.8,GSM7324-ROUTING-MIB::agentOspfRouteRedistTable,,not-accessible,,current,,This table contains the MIB objects required to configure  route-redistribution for OSPF. Here, OSPF is the Destination protocol and the source protocols can be any of : BGP, RIP, Static, Connected.
.1.3.6.1.4.1.4526.1.7.2.4.8.1,GSM7324-ROUTING-MIB::agentOspfRouteRedistEntry,,not-accessible,agentOspfRouteRedistSource,current,,
.1.3.6.1.4.1.4526.1.7.2.4.8.1.1,GSM7324-ROUTING-MIB::agentOspfRouteRedistSource,INTEGER,read-only,,current,connected(1):static(2):rip(3):bgp(4),Source protocol, from which OSPF can redistribute routes. This object also acts as the identifier for the  OSPF redistribution Table entry.
.1.3.6.1.4.1.4526.1.7.2.4.8.1.2,GSM7324-ROUTING-MIB::agentOspfRouteRedistMode,INTEGER,read-write,,current,enable(1):disable(2),User enabels/disables route-redistribution for a particular source protocol.
.1.3.6.1.4.1.4526.1.7.2.4.8.1.3,GSM7324-ROUTING-MIB::agentOspfRouteRedistMetric,Integer32,read-write,,current,,Metric used for redistributing a particular source protocol route into OSPF.
.1.3.6.1.4.1.4526.1.7.2.4.8.1.4,GSM7324-ROUTING-MIB::agentOspfRouteRedistMetricConfigured,,read-write,,current,,Flag to determine whether OSPF redistribute-metric is configured or not.
.1.3.6.1.4.1.4526.1.7.2.4.8.1.5,GSM7324-ROUTING-MIB::agentOspfRouteRedistMetricType,INTEGER,read-write,,current,externalType1(1):externalType2(2),Metric Type of routes,which OSPF redistributes from other source protocols. It can be 1(external type 1) or 2(external type 2).
.1.3.6.1.4.1.4526.1.7.2.4.8.1.6,GSM7324-ROUTING-MIB::agentOspfRouteRedistTag,Unsigned32,read-write,,current,,It specifies the tag field in routes redistributed by OSPF.
.1.3.6.1.4.1.4526.1.7.2.4.8.1.7,GSM7324-ROUTING-MIB::agentOspfRouteRedistSubnets,,read-write,,current,,If this value is false, then OSPF will not redistribute subnetted routes.
.1.3.6.1.4.1.4526.1.7.2.4.8.1.8,GSM7324-ROUTING-MIB::agentOspfRouteRedistDistList,Unsigned32,read-write,,current,,Access-list number of the access-list, which filters routes received from a source-protocol.
.1.3.6.1.4.1.4526.1.7.2.4.8.1.9,GSM7324-ROUTING-MIB::agentOspfRouteRedistDistListConfigured,,read-write,,current,,Flag to determine whether Access-list is configured or not.
.1.3.6.1.4.1.4526.1.7.2.4.9,GSM7324-ROUTING-MIB::agentOspfIfTable,,not-accessible,,current,,The OSPF Interface Table describes the inter- faces from the viewpoint of OSPF. Augments 
.1.3.6.1.4.1.4526.1.7.2.4.9.1,GSM7324-ROUTING-MIB::agentOspfIfEntry,,not-accessible,,current,,The OSPF Interface Entry describes one inter- face from the viewpoint of OSPF. Augments
.1.3.6.1.4.1.4526.1.7.2.4.9.1.1,GSM7324-ROUTING-MIB::agentOspfIfAuthKeyId,INTEGER,read-create,,current,,The identifier for the authentication key used on this interface. This field is only meaningful  when the OSPF-MIB ospfIfAuthType is md5(2); 
.1.3.6.1.4.1.4526.1.7.2.4.10,GSM7324-ROUTING-MIB::agentOspfVirtIfTable,,not-accessible,,current,,Information about this router's virtual inter- faces. Augments ospfVirtIfTable from the OSPF-MIB.
.1.3.6.1.4.1.4526.1.7.2.4.10.1,GSM7324-ROUTING-MIB::agentOspfVirtIfEntry,,not-accessible,,current,,Information about a single Virtual Interface.
.1.3.6.1.4.1.4526.1.7.2.4.10.1.1,GSM7324-ROUTING-MIB::agentOspfVirtIfAuthKeyId,INTEGER,read-create,,current,,The identifier for the authentication key used on this virtual interface. This field is only meaningful  when the OSPF-MIB ospfVirtIfAuthType is md5(2); 
.1.3.6.1.4.1.4526.1.7.2.4.11,GSM7324-ROUTING-MIB::agentRouterOspfRFC1583CompatibilityMode,INTEGER,read-write,,current,enable(1):disable(2),From RFC2328:  Controls the preference rules used in Section 16.4 when choosing among multiple AS-external-LSAs advertising the same destination. When set to 'enabled', the preference rules remain those specified by RFC 1583 ([Ref9]). When set to 'disabled', the preference rules are those stated in Section 16.4.1, which prevent routing loops when AS- external-LSAs for the same destination have been originated from different areas. Set to 'enabled' by default. In order to minimize the chance of routing loops, all OSPF routers in an OSPF routing domain should have RFC1583Compatibility set identically. When there are routers present that have not been updated with the functionality specified in Section 16.4.1 of this memo, all routers should have RFC1583Compatibility set to 'enabled'. Otherwise, all routers should have RFC1583Compatibility set to 'disabled', preventing all routing loops.
.1.3.6.1.4.1.4526.1.7.2.4.12,GSM7324-ROUTING-MIB::agentOspfAreaTable,,not-accessible,,current,,Information describing the additional configured  parameters and cumulative statistics of the router's attached areas.
.1.3.6.1.4.1.4526.1.7.2.4.12.1,GSM7324-ROUTING-MIB::agentOspfAreaEntry,,not-accessible,,current,,Information describing the additional configured  parameters and cumulative statistics of the router's attached areas.
.1.3.6.1.4.1.4526.1.7.2.4.12.1.2,GSM7324-ROUTING-MIB::agentOspfAuthType,Integer32,read-write,,current,,The authentication type specified for an area. Additional authentication types may be assigned locally on a per Area basis.
.1.3.6.1.4.1.4526.1.7.2.5,GSM7324-ROUTING-MIB::agentSnmpTrapFlagsConfigGroupLayer3,,,,,,
.1.3.6.1.4.1.4526.1.7.2.5.1,GSM7324-ROUTING-MIB::agentSnmpVRRPNewMasterTrapFlag,INTEGER,read-write,,current,enable(1):disable(2),This flag enables the sending of VRRP new master notification traps.
.1.3.6.1.4.1.4526.1.7.2.5.2,GSM7324-ROUTING-MIB::agentSnmpVRRPAuthFailureTrapFlag,INTEGER,read-write,,current,enable(1):disable(2),This flag enables the sending of VRRP authentication failure notification traps.
.1.3.6.1.4.1.4526.1.7.2.6,GSM7324-ROUTING-MIB::agentBootpDhcpRelayGroup,,,,,,
.1.3.6.1.4.1.4526.1.7.2.6.1,GSM7324-ROUTING-MIB::agentBootpDhcpRelayMaxHopCount,Integer32,read-write,,current,,The BOOTP/DHCP Max Hop Count. The relay agent silently discards BOOTREQUEST messages whose hops field exceeds the value 16  assuming that the request is looped through the intermediate agents. The default value is 4.
.1.3.6.1.4.1.4526.1.7.2.6.2,GSM7324-ROUTING-MIB::agentBootpDhcpRelayForwardingIp,IpAddress,read-write,,current,,The BOOTP/DHCP Server IP Address.  All the requests will be forwarded and the replies expected from this address.
.1.3.6.1.4.1.4526.1.7.2.6.3,GSM7324-ROUTING-MIB::agentBootpDhcpRelayForwardMode,INTEGER,read-write,,current,enable(1):disable(2),The BOOTP/DHCP Admin Mode.  The relaying functionality can be administratively enabled or disabled by this object
.1.3.6.1.4.1.4526.1.7.2.6.4,GSM7324-ROUTING-MIB::agentBootpDhcpRelayMinWaitTime,Integer32,read-write,,current,,The BOOTP/DHCP Minimum Wait Time.  When the BOOTP relay agent receives a BOOTREQUEST message, it MAY use the value of the 'secs'  (seconds since client began booting) field of the request as a factor in deciding whether to  relay the request or not.
.1.3.6.1.4.1.4526.1.7.2.6.5,GSM7324-ROUTING-MIB::agentBootpDhcpRelayCircuitIdOptionMode,INTEGER,read-write,,current,enable(1):disable(2),The BOOTP/DHCP Circuit ID Option Mode.  This flag is set to enable/disable the network element to add/remove the DHCP Relay agent Circuit ID sub-options.
.1.3.6.1.4.1.4526.1.7.2.6.6,GSM7324-ROUTING-MIB::agentBootpDhcpRelayNumOfRequestsReceived,Integer32,read-only,,current,,The Number of BOOTP/DHCP Requests Received.  Total number of BOOTREQUESTs received from all clients.
.1.3.6.1.4.1.4526.1.7.2.6.7,GSM7324-ROUTING-MIB::agentBootpDhcpRelayNumOfRequestsForwarded,Integer32,read-only,,current,,The Number of BOOTP/DHCP Requests Forwarded.  Total number of BOOTREQUESTs forwarded to the next agents/servers.
.1.3.6.1.4.1.4526.1.7.2.6.8,GSM7324-ROUTING-MIB::agentBootpDhcpRelayNumOfDiscards,Integer32,read-only,,current,,The Number of BOOTP/DHCP Discards.  Total number of packets discarded by the network element because of error in the packet.
.1.3.6.1.4.1.4526.1.7.3,GSM7324-QOS-MIB::gsm7324QOS,,,,,,
.1.3.6.1.4.1.4526.1.7.3.2,GSM7324-QOS-ACL-MIB::gsm7324QOSACL,,,,,,
.1.3.6.1.4.1.4526.1.7.3.2.1,GSM7324-QOS-ACL-MIB::aclTable,,not-accessible,,current,,A table of ACL instances.
.1.3.6.1.4.1.4526.1.7.3.2.1.1,GSM7324-QOS-ACL-MIB::aclEntry,,not-accessible,aclIndex,current,,
.1.3.6.1.4.1.4526.1.7.3.2.1.1.1,GSM7324-QOS-ACL-MIB::aclIndex,Integer32,not-accessible,,current,,The ACL index this instance is associated with.
.1.3.6.1.4.1.4526.1.7.3.2.1.1.3,GSM7324-QOS-ACL-MIB::aclStatus,INTEGER,read-create,,current,active(1):notInService(2):notReady(3):createAndGo(4):createAndWait(5):destroy(6),Status of this instance.  active(1) - this ACL instance is active createAndGo(4) - set to this value to create an instance destroy(6) - set to this value to delete an instance
.1.3.6.1.4.1.4526.1.7.3.2.2,GSM7324-QOS-ACL-MIB::aclIfTable,,not-accessible,,current,,A table of ACL interface instances.
.1.3.6.1.4.1.4526.1.7.3.2.2.1,GSM7324-QOS-ACL-MIB::aclIfEntry,,not-accessible,aclIndex:aclIfIndex:aclIfDirection,current,,
.1.3.6.1.4.1.4526.1.7.3.2.2.1.1,GSM7324-QOS-ACL-MIB::aclIfIndex,Integer32,not-accessible,,current,,The interface this ACL instance is associated with.
.1.3.6.1.4.1.4526.1.7.3.2.2.1.2,GSM7324-QOS-ACL-MIB::aclIfDirection,INTEGER,not-accessible,,current,inbound(1):outbound(2),The direction this ACL instance applies.
.1.3.6.1.4.1.4526.1.7.3.2.2.1.3,GSM7324-QOS-ACL-MIB::aclIfStatus,INTEGER,read-create,,current,active(1):notInService(2):notReady(3):createAndGo(4):createAndWait(5):destroy(6),Status of this instance.  active(1) - this ACL index instance is active createAndGo(4) - set to this value to assign an interface to an ACL destroy(6) - set to this value to remove an interface to an ACL
.1.3.6.1.4.1.4526.1.7.3.2.3,GSM7324-QOS-ACL-MIB::aclRuleTable,,not-accessible,,current,,A table of ACL Rules instances.
.1.3.6.1.4.1.4526.1.7.3.2.3.1,GSM7324-QOS-ACL-MIB::aclRuleEntry,,not-accessible,aclIndex:aclRuleIndex,current,,A table of ACL Classification Rules
.1.3.6.1.4.1.4526.1.7.3.2.3.1.1,GSM7324-QOS-ACL-MIB::aclRuleIndex,Integer32,not-accessible,,current,,The index of this instance.
.1.3.6.1.4.1.4526.1.7.3.2.3.1.2,GSM7324-QOS-ACL-MIB::aclRuleAction,INTEGER,read-create,,current,permit(1):deny(2),The type of action this rule should perform.
.1.3.6.1.4.1.4526.1.7.3.2.3.1.3,GSM7324-QOS-ACL-MIB::aclRuleProtocol,Integer32,read-create,,current,,icmp - 1 igmp - 2 ip - 4 tcp - 6 udp - 17 All values from 1 to 255 are valid.
.1.3.6.1.4.1.4526.1.7.3.2.3.1.4,GSM7324-QOS-ACL-MIB::aclRuleSrcIpAddress,IpAddress,read-create,,current,,The Source IP Address used in the ACL Classification.
.1.3.6.1.4.1.4526.1.7.3.2.3.1.5,GSM7324-QOS-ACL-MIB::aclRuleSrcIpMask,IpAddress,read-create,,current,,The Source IP Mask used in the ACL Classification.
.1.3.6.1.4.1.4526.1.7.3.2.3.1.6,GSM7324-QOS-ACL-MIB::aclRuleSrcL4Port,Integer32,read-create,,current,,The Source Port Number (Layer 4) used in the ACL Classification.
.1.3.6.1.4.1.4526.1.7.3.2.3.1.7,GSM7324-QOS-ACL-MIB::aclRuleSrcL4PortRangeStart,Integer32,read-create,,current,,The Source Port Number(Layer 4) range start.
.1.3.6.1.4.1.4526.1.7.3.2.3.1.8,GSM7324-QOS-ACL-MIB::aclRuleSrcL4PortRangeEnd,Integer32,read-create,,current,,The Source Port Number(Layer 4) range end.
.1.3.6.1.4.1.4526.1.7.3.2.3.1.9,GSM7324-QOS-ACL-MIB::aclRuleDestIpAddress,IpAddress,read-create,,current,,The Destination IP Address used in the ACL Classification.
.1.3.6.1.4.1.4526.1.7.3.2.3.1.10,GSM7324-QOS-ACL-MIB::aclRuleDestIpMask,IpAddress,read-create,,current,,The Destination IP Mask used in the ACL Classification.
.1.3.6.1.4.1.4526.1.7.3.2.3.1.11,GSM7324-QOS-ACL-MIB::aclRuleDestL4Port,Integer32,read-create,,current,,The Destination Port (Layer 4) used in ACl classification.
.1.3.6.1.4.1.4526.1.7.3.2.3.1.12,GSM7324-QOS-ACL-MIB::aclRuleDestL4PortRangeStart,Integer32,read-create,,current,,The Destination Port (Layer 4) starting range used in ACL classification.
.1.3.6.1.4.1.4526.1.7.3.2.3.1.13,GSM7324-QOS-ACL-MIB::aclRuleDestL4PortRangeEnd,Integer32,read-create,,current,,The Destination Port (Layer 4) ending range used in ACL classification.
.1.3.6.1.4.1.4526.1.7.3.2.3.1.14,GSM7324-QOS-ACL-MIB::aclRuleIPDSCP,Integer32,read-create,,current,,The Differentiated Services Code Point value.
.1.3.6.1.4.1.4526.1.7.3.2.3.1.15,GSM7324-QOS-ACL-MIB::aclRuleIpPrecedence,Integer32,read-create,,current,,The Type of Service (TOS) IP Precedence value.
.1.3.6.1.4.1.4526.1.7.3.2.3.1.16,GSM7324-QOS-ACL-MIB::aclRuleIpTosBits,Integer32,read-create,,current,,The Type of Service (TOS) Bits value.
.1.3.6.1.4.1.4526.1.7.3.2.3.1.17,GSM7324-QOS-ACL-MIB::aclRuleIpTosMask,Integer32,read-create,,current,,The Type of Service (TOS) Mask value.
.1.3.6.1.4.1.4526.1.7.3.2.3.1.18,GSM7324-QOS-ACL-MIB::aclRuleStatus,INTEGER,read-create,,current,active(1):notInService(2):notReady(3):createAndGo(4):createAndWait(5):destroy(6),Status of this instance.  active(1) - this ACL Rule is active createAndGo(4) - set to this value to create an instance destroy(6) - set to this value to delete an instance
.1.3.6.1.4.1.4526.1.7.3.3,GSM7324-QOS-DIFFSERV-EXTENSIONS-MIB::gsm7324QOSDiffServExtensions,,,,,,
.1.3.6.1.4.1.4526.1.7.3.3.1,GSM7324-QOS-DIFFSERV-EXTENSIONS-MIB::agentDiffServMIBObjects,,,,,,
.1.3.6.1.4.1.4526.1.7.3.3.1.1,GSM7324-QOS-DIFFSERV-EXTENSIONS-MIB::agentDiffServClassifier,,,,,,
.1.3.6.1.4.1.4526.1.7.3.3.1.1.1,GSM7324-QOS-DIFFSERV-EXTENSIONS-MIB::agentDiffServAuxMfClfrNextFree,Unsigned32,read-only,,current,,This object contains an unused value for agentDiffServAuxMfClfrId , or a zero to indicate that none exist.
.1.3.6.1.4.1.4526.1.7.3.3.1.1.2,GSM7324-QOS-DIFFSERV-EXTENSIONS-MIB::agentDiffServAuxMfClfrTable,,not-accessible,,current,,A table of Auxiliary Multi-field Classifier filter entries that a system may use to identify IP traffic.
.1.3.6.1.4.1.4526.1.7.3.3.1.1.2.1,GSM7324-QOS-DIFFSERV-EXTENSIONS-MIB::agentDiffServAuxMfClfrEntry,,not-accessible,agentDiffServAuxMfClfrId,current,,An IP Multi-field Classifier entry describes a single filter.
.1.3.6.1.4.1.4526.1.7.3.3.1.1.2.1.1,GSM7324-QOS-DIFFSERV-EXTENSIONS-MIB::agentDiffServAuxMfClfrId,Unsigned32,not-accessible,,current,,An index that enumerates the Auxiliary MultiField Classifier filter entries. Managers obtain new values for row creation in this table by reading agentDiffServAuxMfClfrNextFree.
.1.3.6.1.4.1.4526.1.7.3.3.1.1.2.1.2,GSM7324-QOS-DIFFSERV-EXTENSIONS-MIB::agentDiffServAuxMfClfrDstAddr,IpAddress,read-create,,current,,The IP address to match against the packet's destination IP address.
.1.3.6.1.4.1.4526.1.7.3.3.1.1.2.1.3,GSM7324-QOS-DIFFSERV-EXTENSIONS-MIB::agentDiffServAuxMfClfrDstMask,IpAddress,read-create,,current,,This mask value identifies the portion of agentDiffServAuxMfClfrDstAddr that is compared against a packet. 
.1.3.6.1.4.1.4526.1.7.3.3.1.1.2.1.4,GSM7324-QOS-DIFFSERV-EXTENSIONS-MIB::agentDiffServAuxMfClfrSrcAddr,IpAddress,read-create,,current,,The IP address to match against the packet's source IP address.
.1.3.6.1.4.1.4526.1.7.3.3.1.1.2.1.5,GSM7324-QOS-DIFFSERV-EXTENSIONS-MIB::agentDiffServAuxMfClfrSrcMask,IpAddress,read-create,,current,,This mask value identifies the portion of agentDiffServAuxMfClfrSrcAddr that is compared against a packet. 
.1.3.6.1.4.1.4526.1.7.3.3.1.1.2.1.6,GSM7324-QOS-DIFFSERV-EXTENSIONS-MIB::agentDiffServAuxMfClfrProtocol,Unsigned32,read-create,,current,,The IP protocol to match against the IPv4 protocol number. A value of 255 means match all. 
.1.3.6.1.4.1.4526.1.7.3.3.1.1.2.1.7,GSM7324-QOS-DIFFSERV-EXTENSIONS-MIB::agentDiffServAuxMfClfrDstL4PortMin,Unsigned32,read-create,,current,,The minimum value that the layer-4 destination port number in the packet must have in order to match this classifier entry. 
.1.3.6.1.4.1.4526.1.7.3.3.1.1.2.1.8,GSM7324-QOS-DIFFSERV-EXTENSIONS-MIB::agentDiffServAuxMfClfrDstL4PortMax,Unsigned32,read-create,,current,,The maximum value that the layer-4 destination port number in the  packet must have in order to match this classifier entry.  for this entry in agentDiffServAuxMfClfrDstL4PortMin. 
.1.3.6.1.4.1.4526.1.7.3.3.1.1.2.1.9,GSM7324-QOS-DIFFSERV-EXTENSIONS-MIB::agentDiffServAuxMfClfrSrcL4PortMin,Unsigned32,read-create,,current,,The minimum value that the layer-4 source port number in the packet must have in order to match this classifier entry. 
.1.3.6.1.4.1.4526.1.7.3.3.1.1.2.1.10,GSM7324-QOS-DIFFSERV-EXTENSIONS-MIB::agentDiffServAuxMfClfrSrcL4PortMax,Unsigned32,read-create,,current,,The maximum value that the layer-4 source port number in the packet must have in order to match this classifier entry. This value must be equal to or greater than the value specified for this entry in diffServMultiFieldClfrSrcL4PortMin. 
.1.3.6.1.4.1.4526.1.7.3.3.1.1.2.1.11,GSM7324-QOS-DIFFSERV-EXTENSIONS-MIB::agentDiffServAuxMfClfrCos,Integer32,read-create,,current,,Three-bit 802.1p priority field in the Ethernet frame used as
.1.3.6.1.4.1.4526.1.7.3.3.1.1.2.1.12,GSM7324-QOS-DIFFSERV-EXTENSIONS-MIB::agentDiffServAuxMfClfrTos,OCTET,read-create,,current,,IP TOS bits value, defined as all eight bits of the Service  Type octet in the IPv4 header. There are multiple, overlapping,  Precedence (bits 7-5): IP Precedence, values 0-7
.1.3.6.1.4.1.4526.1.7.3.3.1.1.2.1.13,GSM7324-QOS-DIFFSERV-EXTENSIONS-MIB::agentDiffServAuxMfClfrTosMask,OCTET,read-create,,current,,IP TOS bits mask value. It identifies the portion of  agentDiffServAuxMfClfrTos that is compared against a packet.  There are multiple, overlapping meanings of the TOS octet in use today. Precedence (bits 7-5): 224 (bit mask '11100000') Other mask values are also permitted.
.1.3.6.1.4.1.4526.1.7.3.3.1.1.2.1.14,GSM7324-QOS-DIFFSERV-EXTENSIONS-MIB::agentDiffServAuxMfClfrDstMac,OCTET,read-create,,current,,Destination MAC address. 
.1.3.6.1.4.1.4526.1.7.3.3.1.1.2.1.15,GSM7324-QOS-DIFFSERV-EXTENSIONS-MIB::agentDiffServAuxMfClfrDstMacMask,OCTET,read-create,,current,,Destination MAC address mask value. This mask value identifies the portion of agentDiffServAuxMfClfrDstMac 
.1.3.6.1.4.1.4526.1.7.3.3.1.1.2.1.16,GSM7324-QOS-DIFFSERV-EXTENSIONS-MIB::agentDiffServAuxMfClfrSrcMac,OCTET,read-create,,current,,Source MAC address. 
.1.3.6.1.4.1.4526.1.7.3.3.1.1.2.1.17,GSM7324-QOS-DIFFSERV-EXTENSIONS-MIB::agentDiffServAuxMfClfrSrcMacMask,OCTET,read-create,,current,,Source MAC address mask value. This mask value identifies the portion of agentDiffServAuxMfClfrSrcMac 
.1.3.6.1.4.1.4526.1.7.3.3.1.1.2.1.18,GSM7324-QOS-DIFFSERV-EXTENSIONS-MIB::agentDiffServAuxMfClfrVlanId,Integer32,read-create,,current,,VLAN ID value for the classifier. A value of -1 indicates that  a specific VLAN ID value has not been defined and thus all  VLAN ID values are considered a match.
.1.3.6.1.4.1.4526.1.7.3.3.1.1.2.1.19,GSM7324-QOS-DIFFSERV-EXTENSIONS-MIB::agentDiffServAuxMfClfrStorage,INTEGER,read-create,,current,other(1):volatile(2):nonVolatile(3):permanent(4):readOnly(5),The storage type for this conceptual row. 
.1.3.6.1.4.1.4526.1.7.3.3.1.1.2.1.20,GSM7324-QOS-DIFFSERV-EXTENSIONS-MIB::agentDiffServAuxMfClfrStatus,INTEGER,read-create,,current,active(1):notInService(2):notReady(3):createAndGo(4):createAndWait(5):destroy(6),The status of this conceptual row.
.1.3.6.1.4.1.4526.1.7.3.3.1.2,GSM7324-QOS-DIFFSERV-EXTENSIONS-MIB::agentDiffServAction,,,,,,
.1.3.6.1.4.1.4526.1.7.3.3.1.2.2,GSM7324-QOS-DIFFSERV-EXTENSIONS-MIB::agentDiffServCosMarkActTable,,not-accessible,,current,,This table enumerates specific Class of Service values used for marking or remarking the priority bits in the 802.1p header. The entries of this  table may be referenced by a diffServActionSpecific attribute.
.1.3.6.1.4.1.4526.1.7.3.3.1.2.2.1,GSM7324-QOS-DIFFSERV-EXTENSIONS-MIB::agentDiffServCosMarkActEntry,,not-accessible,agentDiffServCosMarkActCos,current,,An entry in the COS mark action table that describes a single Class of Service value used for marking.
.1.3.6.1.4.1.4526.1.7.3.3.1.2.2.1.1,GSM7324-QOS-DIFFSERV-EXTENSIONS-MIB::agentDiffServCosMarkActCos,Integer32,read-only,,current,,The Class of Service value that this Action will store into the priority bits of the 802.1p header. It is quite possible that the  only packets subject to this Action are already marked with this COS  value. COS packet marking occurs upon egress from the network node.
.1.3.6.1.4.1.4526.1.7.3.3.1.2.4,GSM7324-QOS-DIFFSERV-EXTENSIONS-MIB::agentDiffServIpPrecMarkActTable,,not-accessible,,current,,This table enumerates specific IP Precedence values used for marking or remarking the Precedence field of IP packets. The entries of this  table may be referenced by a diffServActionSpecific attribute.
.1.3.6.1.4.1.4526.1.7.3.3.1.2.4.1,GSM7324-QOS-DIFFSERV-EXTENSIONS-MIB::agentDiffServIpPrecMarkActEntry,,not-accessible,agentDiffServIpPrecMarkActPrecedence,current,,An entry in the IP Precedence mark action table that describes a single IP Precedence value used for marking.
.1.3.6.1.4.1.4526.1.7.3.3.1.2.4.1.1,GSM7324-QOS-DIFFSERV-EXTENSIONS-MIB::agentDiffServIpPrecMarkActPrecedence,Integer32,read-only,,current,,The IP Precedence that this Action will store into the Precedence field of the IP packet. It is quite possible that the only packets  subject to this Action are already marked with this IP Precedence.  Note also that Differentiated Services processing may result in a packet being marked on both ingress to a network and on egress from  it, and that ingress and egress can occur in the same router.
.1.3.6.1.4.1.4526.1.7.3.4,GSM7324-QOS-DIFFSERV-PRIVATE-MIB::gsm7324QOSDiffServPrivate,,,,,,
.1.3.6.1.4.1.4526.1.7.3.4.1,GSM7324-QOS-DIFFSERV-PRIVATE-MIB::agentDiffServGenStatusGroup,,,,,,
.1.3.6.1.4.1.4526.1.7.3.4.1.1,GSM7324-QOS-DIFFSERV-PRIVATE-MIB::agentDiffServGenStatusAdminMode,INTEGER,read-write,,current,enable(1):disable(2), DiffServ Admin Mode
.1.3.6.1.4.1.4526.1.7.3.4.1.2,GSM7324-QOS-DIFFSERV-PRIVATE-MIB::agentDiffServGenStatusClassTableSize,Unsigned32,read-only,,current,, Current size of the Class Table
.1.3.6.1.4.1.4526.1.7.3.4.1.3,GSM7324-QOS-DIFFSERV-PRIVATE-MIB::agentDiffServGenStatusClassTableMax,Unsigned32,read-only,,current,, Max size of the Class Table
.1.3.6.1.4.1.4526.1.7.3.4.1.4,GSM7324-QOS-DIFFSERV-PRIVATE-MIB::agentDiffServGenStatusClassRuleTableSize,Unsigned32,read-only,,current,, Current size of Class Rule Table
.1.3.6.1.4.1.4526.1.7.3.4.1.5,GSM7324-QOS-DIFFSERV-PRIVATE-MIB::agentDiffServGenStatusClassRuleTableMax,Unsigned32,read-only,,current,, Max size of the Class Rule Table.
.1.3.6.1.4.1.4526.1.7.3.4.1.6,GSM7324-QOS-DIFFSERV-PRIVATE-MIB::agentDiffServGenStatusPolicyTableSize,Unsigned32,read-only,,current,, Current Size of the Policy Table.
.1.3.6.1.4.1.4526.1.7.3.4.1.7,GSM7324-QOS-DIFFSERV-PRIVATE-MIB::agentDiffServGenStatusPolicyTableMax,Unsigned32,read-only,,current,, Max size of the Policy Table
.1.3.6.1.4.1.4526.1.7.3.4.1.8,GSM7324-QOS-DIFFSERV-PRIVATE-MIB::agentDiffServGenStatusPolicyInstTableSize,Unsigned32,read-only,,current,, Current size of the Policy-Class Instance Table
.1.3.6.1.4.1.4526.1.7.3.4.1.9,GSM7324-QOS-DIFFSERV-PRIVATE-MIB::agentDiffServGenStatusPolicyInstTableMax,Unsigned32,read-only,,current,, Max size of the Policy-Class Instance Table
.1.3.6.1.4.1.4526.1.7.3.4.1.10,GSM7324-QOS-DIFFSERV-PRIVATE-MIB::agentDiffServGenStatusPolicyAttrTableSize,Unsigned32,read-only,,current,, Current size of the Policy Attribute Table
.1.3.6.1.4.1.4526.1.7.3.4.1.11,GSM7324-QOS-DIFFSERV-PRIVATE-MIB::agentDiffServGenStatusPolicyAttrTableMax,Unsigned32,read-only,,current,, Max size of the Policy Attribute Table
.1.3.6.1.4.1.4526.1.7.3.4.1.12,GSM7324-QOS-DIFFSERV-PRIVATE-MIB::agentDiffServGenStatusServiceTableSize,Unsigned32,read-only,,current,, Current size of the Service Table
.1.3.6.1.4.1.4526.1.7.3.4.1.13,GSM7324-QOS-DIFFSERV-PRIVATE-MIB::agentDiffServGenStatusServiceTableMax,Unsigned32,read-only,,current,, Max size of the Service Table
.1.3.6.1.4.1.4526.1.7.3.4.2,GSM7324-QOS-DIFFSERV-PRIVATE-MIB::agentDiffServClassGroup,,,,,,
.1.3.6.1.4.1.4526.1.7.3.4.2.1,GSM7324-QOS-DIFFSERV-PRIVATE-MIB::agentDiffServClassIndexNextFree,Unsigned32,read-only,,current,,This object contains an unused value for classIndex, or a
.1.3.6.1.4.1.4526.1.7.3.4.2.2,GSM7324-QOS-DIFFSERV-PRIVATE-MIB::agentDiffServClassTable,,not-accessible,,current,,A table of the DiffServ class entries
.1.3.6.1.4.1.4526.1.7.3.4.2.2.1,GSM7324-QOS-DIFFSERV-PRIVATE-MIB::agentDiffServClassEntry,,not-accessible,agentDiffServClassIndex,current,,Represents entry for a DiffServ traffic class
.1.3.6.1.4.1.4526.1.7.3.4.2.2.1.1,GSM7324-QOS-DIFFSERV-PRIVATE-MIB::agentDiffServClassIndex,Unsigned32,not-accessible,,current,,The identifier for DiffServ Class entry 
.1.3.6.1.4.1.4526.1.7.3.4.2.2.1.2,GSM7324-QOS-DIFFSERV-PRIVATE-MIB::agentDiffServClassName,OCTET,read-create,,current,,Name of the DiffServ traffic class
.1.3.6.1.4.1.4526.1.7.3.4.2.2.1.3,GSM7324-QOS-DIFFSERV-PRIVATE-MIB::agentDiffServClassType,INTEGER,read-create,,current,all(1):any(2):acl(3),The class type indicates how the individual class match 
.1.3.6.1.4.1.4526.1.7.3.4.2.2.1.4,GSM7324-QOS-DIFFSERV-PRIVATE-MIB::agentDiffServClassAclNum,Unsigned32,read-create,,current,,The access list number used to define the match conditions for the  DiffServ class.
.1.3.6.1.4.1.4526.1.7.3.4.2.2.1.5,GSM7324-QOS-DIFFSERV-PRIVATE-MIB::agentDiffServClassRuleIndexNextFree,Unsigned32,read-only,,current,,This object contains an unused value for classRuleIndex, or a
.1.3.6.1.4.1.4526.1.7.3.4.2.2.1.6,GSM7324-QOS-DIFFSERV-PRIVATE-MIB::agentDiffServClassStorageType,INTEGER,read-create,,current,other(1):volatile(2):nonVolatile(3):permanent(4):readOnly(5),Storage-type for this conceptual row
.1.3.6.1.4.1.4526.1.7.3.4.2.2.1.7,GSM7324-QOS-DIFFSERV-PRIVATE-MIB::agentDiffServClassRowStatus,INTEGER,read-create,,current,active(1):notInService(2):notReady(3):createAndGo(4):createAndWait(5):destroy(6),The status of this conceptual row.
.1.3.6.1.4.1.4526.1.7.3.4.2.3,GSM7324-QOS-DIFFSERV-PRIVATE-MIB::agentDiffServClassRuleTable,,not-accessible,,current,,A table of the DiffServ Class Rule entries
.1.3.6.1.4.1.4526.1.7.3.4.2.3.1,GSM7324-QOS-DIFFSERV-PRIVATE-MIB::agentDiffServClassRuleEntry,,not-accessible,agentDiffServClassIndex:agentDiffServClassRuleIndex,current,,Represents entry for a set of class-match rules
.1.3.6.1.4.1.4526.1.7.3.4.2.3.1.1,GSM7324-QOS-DIFFSERV-PRIVATE-MIB::agentDiffServClassRuleIndex,Unsigned32,not-accessible,,current,,The identifier for DiffServ Class Rule Table entry within a class
.1.3.6.1.4.1.4526.1.7.3.4.2.3.1.2,GSM7324-QOS-DIFFSERV-PRIVATE-MIB::agentDiffServClassRuleMatchEntryType,INTEGER,read-create,,current,cos(1):dstip(2):dstl4port(3):dstmac(4):every(5):ipdscp(6):ipprecedence(7):iptos(8):protocol(9):refclass(10):srcip(11):srcl4port(12):srcmac(13):vlan(14),Class Rule match entry type, it determines which one of the individual  match conditions is defined for the present class rule. This object must be created before any other match object in this row.
.1.3.6.1.4.1.4526.1.7.3.4.2.3.1.3,GSM7324-QOS-DIFFSERV-PRIVATE-MIB::agentDiffServClassRuleMatchCos,Unsigned32,read-create,,current,,Three-bit 802.1p priority field in the Ethernet frame used as agentDiffServClassRuleMatchEntryType is set to cos(1).
.1.3.6.1.4.1.4526.1.7.3.4.2.3.1.4,GSM7324-QOS-DIFFSERV-PRIVATE-MIB::agentDiffServClassRuleMatchDstIpAddr,IpAddress,read-create,,current,,Destination IP address match value for the class - only valid if the 
.1.3.6.1.4.1.4526.1.7.3.4.2.3.1.5,GSM7324-QOS-DIFFSERV-PRIVATE-MIB::agentDiffServClassRuleMatchDstIpMask,IpAddress,read-create,,current,,Destination IP address mask match value for the class - only valid if the  compared against a packet. A non-contiguous mask value is permitted.
.1.3.6.1.4.1.4526.1.7.3.4.2.3.1.6,GSM7324-QOS-DIFFSERV-PRIVATE-MIB::agentDiffServClassRuleMatchDstL4PortStart,Unsigned32,read-create,,current,,Destination layer 4 port range start match value for the class - only  valid if the agentDiffServClassRuleMatchEntryType is set to dstl4port(3).
.1.3.6.1.4.1.4526.1.7.3.4.2.3.1.7,GSM7324-QOS-DIFFSERV-PRIVATE-MIB::agentDiffServClassRuleMatchDstL4PortEnd,Unsigned32,read-create,,current,,Destination layer 4 port range end match value for the class - only valid if the agentDiffServClassRuleMatchEntryType is set to dstl4port(3).
.1.3.6.1.4.1.4526.1.7.3.4.2.3.1.8,GSM7324-QOS-DIFFSERV-PRIVATE-MIB::agentDiffServClassRuleMatchDstMacAddr,OCTET,read-create,,current,,Destination MAC address match value for the class - only valid if the 
.1.3.6.1.4.1.4526.1.7.3.4.2.3.1.9,GSM7324-QOS-DIFFSERV-PRIVATE-MIB::agentDiffServClassRuleMatchDstMacMask,OCTET,read-create,,current,,Destination MAC address mask match value for the class - only valid if the  compared against a packet. A non-contiguous mask value is permitted.
.1.3.6.1.4.1.4526.1.7.3.4.2.3.1.10,GSM7324-QOS-DIFFSERV-PRIVATE-MIB::agentDiffServClassRuleMatchEvery,INTEGER,read-only,,current,true(1):false(2),Flag to indicate that the class rule is defined to match on every packet,  regardless of content. - only valid if the  agentDiffServClassRuleMatchEntryType is set to every(5).
.1.3.6.1.4.1.4526.1.7.3.4.2.3.1.11,GSM7324-QOS-DIFFSERV-PRIVATE-MIB::agentDiffServClassRuleMatchIpDscp,Unsigned32,read-create,,current,,IP DiffServ Code Point (DSCP) match value for the class - only valid if  the agentDiffServClassRuleMatchEntryType is set to ipdscp(6). The DSCP  IPv4 header.
.1.3.6.1.4.1.4526.1.7.3.4.2.3.1.12,GSM7324-QOS-DIFFSERV-PRIVATE-MIB::agentDiffServClassRuleMatchIpPrecedence,Unsigned32,read-create,,current,,IP Precedence match value for the class - only valid if the 
.1.3.6.1.4.1.4526.1.7.3.4.2.3.1.13,GSM7324-QOS-DIFFSERV-PRIVATE-MIB::agentDiffServClassRuleMatchIpTosBits,OCTET,read-create,,current,,IP TOS bits match value for the class - only valid if the 
.1.3.6.1.4.1.4526.1.7.3.4.2.3.1.14,GSM7324-QOS-DIFFSERV-PRIVATE-MIB::agentDiffServClassRuleMatchIpTosMask,OCTET,read-create,,current,,IP TOS bits mask match value for the class - only valid if the 
.1.3.6.1.4.1.4526.1.7.3.4.2.3.1.15,GSM7324-QOS-DIFFSERV-PRIVATE-MIB::agentDiffServClassRuleMatchProtocolNum,Unsigned32,read-create,,current,,Protocol number match value for the class - only valid if the 
.1.3.6.1.4.1.4526.1.7.3.4.2.3.1.16,GSM7324-QOS-DIFFSERV-PRIVATE-MIB::agentDiffServClassRuleMatchRefClassIndex,Unsigned32,read-create,,current,,Index of the corresponding referenced class - only valid if the 
.1.3.6.1.4.1.4526.1.7.3.4.2.3.1.17,GSM7324-QOS-DIFFSERV-PRIVATE-MIB::agentDiffServClassRuleMatchSrcIpAddr,IpAddress,read-create,,current,,Source IP address match value for the class - only valid if the 
.1.3.6.1.4.1.4526.1.7.3.4.2.3.1.18,GSM7324-QOS-DIFFSERV-PRIVATE-MIB::agentDiffServClassRuleMatchSrcIpMask,IpAddress,read-create,,current,,Source IP address mask match value for the class - only valid if the 
.1.3.6.1.4.1.4526.1.7.3.4.2.3.1.19,GSM7324-QOS-DIFFSERV-PRIVATE-MIB::agentDiffServClassRuleMatchSrcL4PortStart,Unsigned32,read-create,,current,,Source layer 4 port range start match value for the class - only valid if  the agentDiffServClassRuleMatchEntryType is set to srcl4port(12).
.1.3.6.1.4.1.4526.1.7.3.4.2.3.1.20,GSM7324-QOS-DIFFSERV-PRIVATE-MIB::agentDiffServClassRuleMatchSrcL4PortEnd,Unsigned32,read-create,,current,,Source layer 4 port range end match value for the class - only valid if  the agentDiffServClassRuleMatchEntryType is set to srcl4port(12).
.1.3.6.1.4.1.4526.1.7.3.4.2.3.1.21,GSM7324-QOS-DIFFSERV-PRIVATE-MIB::agentDiffServClassRuleMatchSrcMacAddr,OCTET,read-create,,current,,Source MAC address match value for the class - only valid if the 
.1.3.6.1.4.1.4526.1.7.3.4.2.3.1.22,GSM7324-QOS-DIFFSERV-PRIVATE-MIB::agentDiffServClassRuleMatchSrcMacMask,OCTET,read-create,,current,,Source MAC address mask match value for the class - only valid if the 
.1.3.6.1.4.1.4526.1.7.3.4.2.3.1.23,GSM7324-QOS-DIFFSERV-PRIVATE-MIB::agentDiffServClassRuleMatchVlanId,Unsigned32,read-create,,current,,VLAN ID match value for the class - only valid if the 
.1.3.6.1.4.1.4526.1.7.3.4.2.3.1.24,GSM7324-QOS-DIFFSERV-PRIVATE-MIB::agentDiffServClassRuleMatchExcludeFlag,INTEGER,read-create,,current,true(1):false(2),Class Rule exclude flag - when set to true(1), the match condition  identified by agentDiffServClassRuleMatchEntryType is negated. This means that for a given field, every value is considered to be a match EXCEPT for  the value specified in the class rule. This flag must be false(2) for an  agendDiffServClassRuleMatchEntryType of refClass(10). object, but before any other match object in this row
.1.3.6.1.4.1.4526.1.7.3.4.2.3.1.25,GSM7324-QOS-DIFFSERV-PRIVATE-MIB::agentDiffServClassRuleStorageType,INTEGER,read-create,,current,other(1):volatile(2):nonVolatile(3):permanent(4):readOnly(5),Storage-type for this conceptual row
.1.3.6.1.4.1.4526.1.7.3.4.2.3.1.26,GSM7324-QOS-DIFFSERV-PRIVATE-MIB::agentDiffServClassRuleRowStatus,INTEGER,read-create,,current,active(1):notInService(2):notReady(3):createAndGo(4):createAndWait(5):destroy(6),The status of this conceptual row.
.1.3.6.1.4.1.4526.1.7.3.4.3,GSM7324-QOS-DIFFSERV-PRIVATE-MIB::agentDiffServPolicyGroup,,,,,,
.1.3.6.1.4.1.4526.1.7.3.4.3.1,GSM7324-QOS-DIFFSERV-PRIVATE-MIB::agentDiffServPolicyIndexNextFree,Unsigned32,read-only,,current,,This object contains an unused value for agentDiffServPolicyIndex, or a
.1.3.6.1.4.1.4526.1.7.3.4.3.2,GSM7324-QOS-DIFFSERV-PRIVATE-MIB::agentDiffServPolicyTable,,not-accessible,,current,,A table of the DiffServ policy entries.
.1.3.6.1.4.1.4526.1.7.3.4.3.2.1,GSM7324-QOS-DIFFSERV-PRIVATE-MIB::agentDiffServPolicyEntry,,not-accessible,agentDiffServPolicyIndex,current,,Represents entry for a DiffServ policy.
.1.3.6.1.4.1.4526.1.7.3.4.3.2.1.1,GSM7324-QOS-DIFFSERV-PRIVATE-MIB::agentDiffServPolicyIndex,Unsigned32,not-accessible,,current,,The identifier for DiffServ Policy table entry.
.1.3.6.1.4.1.4526.1.7.3.4.3.2.1.2,GSM7324-QOS-DIFFSERV-PRIVATE-MIB::agentDiffServPolicyName,OCTET,read-create,,current,,Name of the policy
.1.3.6.1.4.1.4526.1.7.3.4.3.2.1.3,GSM7324-QOS-DIFFSERV-PRIVATE-MIB::agentDiffServPolicyType,INTEGER,read-create,,current,in(1):out(2), The policy type dictates whether inbound or outbound policy attribute statements are used in the policy definition.
.1.3.6.1.4.1.4526.1.7.3.4.3.2.1.4,GSM7324-QOS-DIFFSERV-PRIVATE-MIB::agentDiffServPolicyInstIndexNextFree,Unsigned32,read-only,,current,,This object contains an unused value for agentDiffServPolicyInstIndex, or  a zero to indicate that none exists. This index is maintained on a  per-policy basis.
.1.3.6.1.4.1.4526.1.7.3.4.3.2.1.5,GSM7324-QOS-DIFFSERV-PRIVATE-MIB::agentDiffServPolicyStorageType,INTEGER,read-create,,current,other(1):volatile(2):nonVolatile(3):permanent(4):readOnly(5),Storage-type for this conceptual row
.1.3.6.1.4.1.4526.1.7.3.4.3.2.1.6,GSM7324-QOS-DIFFSERV-PRIVATE-MIB::agentDiffServPolicyRowStatus,INTEGER,read-create,,current,active(1):notInService(2):notReady(3):createAndGo(4):createAndWait(5):destroy(6),The status of this conceptual row.
.1.3.6.1.4.1.4526.1.7.3.4.3.3,GSM7324-QOS-DIFFSERV-PRIVATE-MIB::agentDiffServPolicyInstTable,,not-accessible,,current,,A table of the policy-class instance entries.
.1.3.6.1.4.1.4526.1.7.3.4.3.3.1,GSM7324-QOS-DIFFSERV-PRIVATE-MIB::agentDiffServPolicyInstEntry,,not-accessible,agentDiffServPolicyIndex:agentDiffServPolicyInstIndex,current,,Represents entry for a policy-class instance.
.1.3.6.1.4.1.4526.1.7.3.4.3.3.1.1,GSM7324-QOS-DIFFSERV-PRIVATE-MIB::agentDiffServPolicyInstIndex,Unsigned32,not-accessible,,current,,The identifier for policy-class Instance table entry within a policy.
.1.3.6.1.4.1.4526.1.7.3.4.3.3.1.2,GSM7324-QOS-DIFFSERV-PRIVATE-MIB::agentDiffServPolicyInstClassIndex,Unsigned32,read-create,,current,,Index of the DiffServ Class Table row, whose class definition is used class (instance) to a policy.
.1.3.6.1.4.1.4526.1.7.3.4.3.3.1.3,GSM7324-QOS-DIFFSERV-PRIVATE-MIB::agentDiffServPolicyInstAttrIndexNextFree,Unsigned32,read-only,,current,,This object contains an unused value for agentDiffServPolicyAttrIndex, or  a zero to indicate that none exists. This index is maintained on a  per-policy-class-instance basis.
.1.3.6.1.4.1.4526.1.7.3.4.3.3.1.4,GSM7324-QOS-DIFFSERV-PRIVATE-MIB::agentDiffServPolicyInstStorageType,INTEGER,read-create,,current,other(1):volatile(2):nonVolatile(3):permanent(4):readOnly(5),Storage-type for this conceptual row.
.1.3.6.1.4.1.4526.1.7.3.4.3.3.1.5,GSM7324-QOS-DIFFSERV-PRIVATE-MIB::agentDiffServPolicyInstRowStatus,INTEGER,read-create,,current,active(1):notInService(2):notReady(3):createAndGo(4):createAndWait(5):destroy(6),The status of this conceptual row.
.1.3.6.1.4.1.4526.1.7.3.4.3.4,GSM7324-QOS-DIFFSERV-PRIVATE-MIB::agentDiffServPolicyAttrTable,,not-accessible,,current,,A table of policy attribute entries
.1.3.6.1.4.1.4526.1.7.3.4.3.4.1,GSM7324-QOS-DIFFSERV-PRIVATE-MIB::agentDiffServPolicyAttrEntry,,not-accessible,agentDiffServPolicyIndex:agentDiffServPolicyInstIndex:agentDiffServPolicyAttrIndex,current,,Represents entry for policy attributes
.1.3.6.1.4.1.4526.1.7.3.4.3.4.1.1,GSM7324-QOS-DIFFSERV-PRIVATE-MIB::agentDiffServPolicyAttrIndex,Unsigned32,not-accessible,,current,,The identifier for policy-attribute entry 
.1.3.6.1.4.1.4526.1.7.3.4.3.4.1.2,GSM7324-QOS-DIFFSERV-PRIVATE-MIB::agentDiffServPolicyAttrStmtEntryType,INTEGER,read-create,,current,bandwidth(1):expedite(2):markCosVal(3):markIpDscpVal(4):markIpPrecedenceVal(5):policeSimple(6):policeSinglerate(7):policeTworate(8):randomdrop(9):shapeAverage(10):shapePeak(11),Policy attribute statement entry type -- this entry type is  created before any other policy attribute statement object in the row. The markIpDscpVal(4), markIpPrecedenceVal(5), policeSimple(6),  policeSinglerate(7) and policeTworate(8) values are only allowed for an  agentDiffServPolicyType of in(1). The remaining values are only allowed  for an agentDiffServPolicyType of out(2).
.1.3.6.1.4.1.4526.1.7.3.4.3.4.1.3,GSM7324-QOS-DIFFSERV-PRIVATE-MIB::agentDiffServPolicyAttrStmtBandwidthCrate,Unsigned32,read-create,,current,,Bandwidth committed rate attribute statement value -- identifies 
.1.3.6.1.4.1.4526.1.7.3.4.3.4.1.4,GSM7324-QOS-DIFFSERV-PRIVATE-MIB::agentDiffServPolicyAttrStmtBandwidthCrateUnits,INTEGER,read-create,,current,kbps(1):percentage(2),Bandwidth committed rate units attribute statement value -- this value  agentDiffServPolicyAttrStmtBandwidthCrate object as either  kilobits-per-second or as a percentage of interface link speed. This  attribute is only valid if the value of  agentDiffServPolicyAttrStmtEntryType is set to bandwidth(1).
.1.3.6.1.4.1.4526.1.7.3.4.3.4.1.5,GSM7324-QOS-DIFFSERV-PRIVATE-MIB::agentDiffServPolicyAttrStmtExpediteCrate,Unsigned32,read-create,,current,,Expedited (bandwidth) committed rate attribute statement value -- it  identifies the maximum guaranteed amount of bandwidth to be reserved for  the specified class instance within the policy. This attribute is only  valid if the value of agentDiffServPolicyAttrStmtEntryType is set to  expedite(2). 
.1.3.6.1.4.1.4526.1.7.3.4.3.4.1.6,GSM7324-QOS-DIFFSERV-PRIVATE-MIB::agentDiffServPolicyAttrStmtExpediteCrateUnits,INTEGER,read-create,,current,kbps(1):percentage(2),Expedited (bandwidth) committed rate units attribute statement value  agentDiffServPolicyAttrStmtExpediteCrate object as either  kilobits-per-second or as a percentage of interface link speed. This  attribute is only valid if the value of  agentDiffServPolicyAttrStmtEntryType is set to expedite(2).
.1.3.6.1.4.1.4526.1.7.3.4.3.4.1.7,GSM7324-QOS-DIFFSERV-PRIVATE-MIB::agentDiffServPolicyAttrStmtExpediteCburst,Unsigned32,read-create,,current,,Expedited (bandwidth) committed burst size attribute statement value, 
.1.3.6.1.4.1.4526.1.7.3.4.3.4.1.8,GSM7324-QOS-DIFFSERV-PRIVATE-MIB::agentDiffServPolicyAttrStmtMarkCosVal,Unsigned32,read-create,,current,,Three-bit 802.1p priority(CoS) value as part of the outbound policy for a  class instance. This attribute is only valid if the value of  agentDiffServPolicyAttrStmtEntryType is set to markCosVal(3).
.1.3.6.1.4.1.4526.1.7.3.4.3.4.1.9,GSM7324-QOS-DIFFSERV-PRIVATE-MIB::agentDiffServPolicyAttrStmtMarkIpDscpVal,Unsigned32,read-create,,current,,Specified IP DSCP value to mark in all inbound packets belonging to the  class-instance. This attribute is only valid if the value of  agentDiffServPolicyAttrStmtEntryType is set to markIpDscpVal(4).
.1.3.6.1.4.1.4526.1.7.3.4.3.4.1.10,GSM7324-QOS-DIFFSERV-PRIVATE-MIB::agentDiffServPolicyAttrStmtMarkIpPrecedenceVal,Unsigned32,read-create,,current,,Specified IP Precedence value to mark in all inbound packets belonging to  the class-instance. This attribute is only valid if the value of  agentDiffServPolicyAttrStmtEntryType is set to markIpPrecedenceVal(5).
.1.3.6.1.4.1.4526.1.7.3.4.3.4.1.11,GSM7324-QOS-DIFFSERV-PRIVATE-MIB::agentDiffServPolicyAttrStmtPoliceConformAct,INTEGER,read-create,,current,drop(1):markdscp(2):markprec(3):send(4),Policing conform action attribute statement value -- determines  agentDiffServPolicyAttrStmtEntryType is policeSimple(6),  policeSinglerate(7), or policeTworate(8).
.1.3.6.1.4.1.4526.1.7.3.4.3.4.1.12,GSM7324-QOS-DIFFSERV-PRIVATE-MIB::agentDiffServPolicyAttrStmtPoliceConformVal,Unsigned32,read-create,,current,,Policing conform DSCP or IP Precedence value attribute statement value --  used to mark the DSCP or IP Precedence field of conforming packets when  the conform action is markdscp(2) or markprec(3), respectively. This  attribute is only valid if the value of  agentDiffServPolicyAttrStmtEntryType is policeSimple(6),  policeSinglerate(7), or policeTworate(8).
.1.3.6.1.4.1.4526.1.7.3.4.3.4.1.13,GSM7324-QOS-DIFFSERV-PRIVATE-MIB::agentDiffServPolicyAttrStmtPoliceExceedAct,INTEGER,read-create,,current,drop(1):markdscp(2):markprec(3):send(4),Policing exceed action attribute statement value -- determines  tworate) currently configured for the specified class instance within the  policy. The default exceed action is drop(1). This attribute is only  valid if the value of agentDiffServPolicyAttrStmtEntryType is  policeSinglerate(7) or policeTworate(8).
.1.3.6.1.4.1.4526.1.7.3.4.3.4.1.14,GSM7324-QOS-DIFFSERV-PRIVATE-MIB::agentDiffServPolicyAttrStmtPoliceExceedVal,Unsigned32,read-create,,current,,Policing exceed DSCP or IP Precedence value attribute statement value --  used to mark the DSCP or IP Precedence field of excess packets when the  exceed action is markdscp(2) or markprec(3), respectively. This attribute  is only valid if the value of agentDiffServPolicyAttrStmtEntryType is  policeSinglerate(7) or policeTworate(8).
.1.3.6.1.4.1.4526.1.7.3.4.3.4.1.15,GSM7324-QOS-DIFFSERV-PRIVATE-MIB::agentDiffServPolicyAttrStmtPoliceNonconformAct,INTEGER,read-create,,current,drop(1):markdscp(2):markprec(3):send(4),Policing non-conform action attribute statement value -- determines the  action taken on nonconforming traffic for the policing style (simple,  singlerate,tworate) currently configured for the specified class instance  attribute is only valid if the value of  agentDiffServPolicyAttrStmtEntryType is policeSimple(6),  policeSinglerate(7), or policeTworate(8).
.1.3.6.1.4.1.4526.1.7.3.4.3.4.1.16,GSM7324-QOS-DIFFSERV-PRIVATE-MIB::agentDiffServPolicyAttrStmtPoliceNonconformVal,Unsigned32,read-create,,current,,Policing non-conform DSCP or IP Precedence value attribute statement value -- used to mark the DSCP or IP Precedence field of nonconforming packets  when the nonconform action is markdscp(2) or markprec(3), respectively.  This attribute is only valid if the value of  agentDiffServPolicyAttrStmtEntryType is policeSimple(6),  policeSinglerate(7), or policeTworate(8).
.1.3.6.1.4.1.4526.1.7.3.4.3.4.1.17,GSM7324-QOS-DIFFSERV-PRIVATE-MIB::agentDiffServPolicyAttrStmtPoliceSimpleCrate,Unsigned32,read-create,,current,,Simple policing committed rate attribute statement value, specified in  kbps. This attribute is only valid if the value of  agentDiffServPolicyAttrStmtEntryType is set to policeSimple(6).
.1.3.6.1.4.1.4526.1.7.3.4.3.4.1.18,GSM7324-QOS-DIFFSERV-PRIVATE-MIB::agentDiffServPolicyAttrStmtPoliceSimpleCburst,Unsigned32,read-create,,current,,Simple policing committed burst size attribute statement value, specified  in Kbytes. This attribute is only valid if the value of  agentDiffServPolicyAttrStmtEntryType is set to policeSimple(6).
.1.3.6.1.4.1.4526.1.7.3.4.3.4.1.19,GSM7324-QOS-DIFFSERV-PRIVATE-MIB::agentDiffServPolicyAttrStmtPoliceSinglerateCrate,Unsigned32,read-create,,current,,Single-rate policing committed rate attribute statement value, specified  in kbps. This attribute is only valid if the value of  agentDiffServPolicyAttrStmtEntryType is set to policeSinglerate(7).
.1.3.6.1.4.1.4526.1.7.3.4.3.4.1.20,GSM7324-QOS-DIFFSERV-PRIVATE-MIB::agentDiffServPolicyAttrStmtPoliceSinglerateCburst,Unsigned32,read-create,,current,,Single-rate policing committed burst size attribute statement value,  specified in Kbytes. This attribute is only valid if the value of  agentDiffServPolicyAttrStmtEntryType is set to policeSinglerate(7).
.1.3.6.1.4.1.4526.1.7.3.4.3.4.1.21,GSM7324-QOS-DIFFSERV-PRIVATE-MIB::agentDiffServPolicyAttrStmtPoliceSinglerateEburst,Unsigned32,read-create,,current,,Single-rate policing excess burst size attribute statement value,  specified in Kbytes. This attribute is only valid if the value of  agentDiffServPolicyAttrStmtEntryType is set to policeSinglerate(7).
.1.3.6.1.4.1.4526.1.7.3.4.3.4.1.22,GSM7324-QOS-DIFFSERV-PRIVATE-MIB::agentDiffServPolicyAttrStmtPoliceTworateCrate,Unsigned32,read-create,,current,,Two-rate policing committed rate attribute statement value, specified in  kbps. This attribute is only valid if the value of  agentDiffServPolicyAttrStmtEntryType is set to policeTworate(8).
.1.3.6.1.4.1.4526.1.7.3.4.3.4.1.23,GSM7324-QOS-DIFFSERV-PRIVATE-MIB::agentDiffServPolicyAttrStmtPoliceTworateCburst,Unsigned32,read-create,,current,,Two-rate policing committed burst size attribute statement value,  specified in Kbytes. This attribute is only valid if the value of  agentDiffServPolicyAttrStmtEntryType is set to policeTworate(8).
.1.3.6.1.4.1.4526.1.7.3.4.3.4.1.24,GSM7324-QOS-DIFFSERV-PRIVATE-MIB::agentDiffServPolicyAttrStmtPoliceTworatePrate,Unsigned32,read-create,,current,,Two-rate policing peak rate attribute statement value, specified in kbps. agentDiffServPolicyAttrStmtEntryType is set to policeTworate(8).
.1.3.6.1.4.1.4526.1.7.3.4.3.4.1.25,GSM7324-QOS-DIFFSERV-PRIVATE-MIB::agentDiffServPolicyAttrStmtPoliceTworatePburst,Unsigned32,read-create,,current,,Two-rate policing peak burst size attribute statement value, specified in  Kbytes. This attribute is only valid if the value of  agentDiffServPolicyAttrStmtEntryType is set to policeTworate(8).
.1.3.6.1.4.1.4526.1.7.3.4.3.4.1.26,GSM7324-QOS-DIFFSERV-PRIVATE-MIB::agentDiffServPolicyAttrStmtRandomdropMinThresh,Unsigned32,read-create,,current,,Random drop minimum threshold attribute statement value -- the average  queue depth minimum threshold in bytes used by the WRED algorithm. This  attribute is only valid if the value of  agentDiffServPolicyAttrStmtEntryType is set to randomdrop(9).
.1.3.6.1.4.1.4526.1.7.3.4.3.4.1.27,GSM7324-QOS-DIFFSERV-PRIVATE-MIB::agentDiffServPolicyAttrStmtRandomdropMaxThresh,Unsigned32,read-create,,current,,Random drop maximum threshold attribute statement value -- the average  queue depth maximum threshold in bytes used by the WRED algorithm. This  attribute is only valid if the value of  agentDiffServPolicyAttrStmtEntryType is set to randomdrop(9).
.1.3.6.1.4.1.4526.1.7.3.4.3.4.1.28,GSM7324-QOS-DIFFSERV-PRIVATE-MIB::agentDiffServPolicyAttrStmtRandomdropMaxDropProb,Unsigned32,read-create,,current,,Random drop maximum drop probability attribute statement value -- the  packet drop probability when the queue depth average reaches its maximum  threshold. It is expressed as a percentage, and is an integer from 0 to  100. This attribute is only valid if the value of  agentDiffServPolicyAttrStmtEntryType is set to randomdrop(9).
.1.3.6.1.4.1.4526.1.7.3.4.3.4.1.29,GSM7324-QOS-DIFFSERV-PRIVATE-MIB::agentDiffServPolicyAttrStmtRandomdropSamplingRate,Unsigned32,read-create,,current,,Random drop sampling rate attribute statement value -- the period at which  the queue depth is sampled for computing an average, expressed in  microseconds. This value is an integer from 0 to 1000000, with a default  value of 0 (meaning per packet sampling). This attribute is only valid if  the value of agentDiffServPolicyAttrStmtEntryType is set to randomdrop(9).
.1.3.6.1.4.1.4526.1.7.3.4.3.4.1.30,GSM7324-QOS-DIFFSERV-PRIVATE-MIB::agentDiffServPolicyAttrStmtRandomdropDecayExponent,Unsigned32,read-create,,current,,Random drop decay exponent attribute statement value -- determines how
.1.3.6.1.4.1.4526.1.7.3.4.3.4.1.31,GSM7324-QOS-DIFFSERV-PRIVATE-MIB::agentDiffServPolicyAttrStmtShapeAverageCrate,Unsigned32,read-create,,current,,Average-rate shaping committed rate attribute statement value, specified  in kbps -- used to establish average rate traffic shaping for the  specified class , which limits transmissions for the class to the  committed information rate, with any excess traffic delayed via queueing.  This attribute is only valid if the value of  agentDiffServPolicyAttrStmtEntryType is set to shapeAverage(10).
.1.3.6.1.4.1.4526.1.7.3.4.3.4.1.32,GSM7324-QOS-DIFFSERV-PRIVATE-MIB::agentDiffServPolicyAttrStmtShapePeakCrate,Unsigned32,read-create,,current,,Peak-rate shaping committed rate attribute statement value, specified in  kbps -- used to establish peak rate traffic shaping for the specified  class , which allows transmissions for the class to exceed the committed  information rate by sending excess traffic with the understanding that it  could be dropped by a downstream network element. This attribute is only  valid if the value of agentDiffServPolicyAttrStmtEntryType is set to  shapePeak(11).
.1.3.6.1.4.1.4526.1.7.3.4.3.4.1.33,GSM7324-QOS-DIFFSERV-PRIVATE-MIB::agentDiffServPolicyAttrStmtShapePeakPrate,Unsigned32,read-create,,current,,Peak-rate shaping peak rate attribute statement value, specified in kbps which allows transmissions for the class to exceed the committed  information rate by sending excess traffic with the understanding that it  could be dropped by a downstream network element. This attribute is only  valid if the value of agentDiffServPolicyAttrStmtEntryType is set to  shapePeak(11).
.1.3.6.1.4.1.4526.1.7.3.4.3.4.1.34,GSM7324-QOS-DIFFSERV-PRIVATE-MIB::agentDiffServPolicyAttrStorageType,INTEGER,read-create,,current,other(1):volatile(2):nonVolatile(3):permanent(4):readOnly(5),Storage-type for this conceptual row.
.1.3.6.1.4.1.4526.1.7.3.4.3.4.1.35,GSM7324-QOS-DIFFSERV-PRIVATE-MIB::agentDiffServPolicyAttrRowStatus,INTEGER,read-create,,current,active(1):notInService(2):notReady(3):createAndGo(4):createAndWait(5):destroy(6),The status of this conceptual row.
.1.3.6.1.4.1.4526.1.7.3.4.3.5,GSM7324-QOS-DIFFSERV-PRIVATE-MIB::agentDiffServPolicyPerfInTable,,not-accessible,,current,,A table of inbound policy-class performance entries
.1.3.6.1.4.1.4526.1.7.3.4.3.5.1,GSM7324-QOS-DIFFSERV-PRIVATE-MIB::agentDiffServPolicyPerfInEntry,,not-accessible,agentDiffServPolicyIndex:agentDiffServPolicyInstIndex:ifIndex,current,,Represents entry for the performance attributes of the associated inbound 
.1.3.6.1.4.1.4526.1.7.3.4.3.5.1.1,GSM7324-QOS-DIFFSERV-PRIVATE-MIB::agentDiffServPolicyPerfInOfferedOctets,Counter32,read-only,,current,,Offered octets count for the inbound policy-class instance performance  entry.
.1.3.6.1.4.1.4526.1.7.3.4.3.5.1.2,GSM7324-QOS-DIFFSERV-PRIVATE-MIB::agentDiffServPolicyPerfInOfferedPackets,Counter32,read-only,,current,,Offered packets count for the inbound policy-class instance performance  entry.
.1.3.6.1.4.1.4526.1.7.3.4.3.5.1.3,GSM7324-QOS-DIFFSERV-PRIVATE-MIB::agentDiffServPolicyPerfInDiscardedOctets,Counter32,read-only,,current,,Discarded octets count for the inbound policy-class instance performance  entry.
.1.3.6.1.4.1.4526.1.7.3.4.3.5.1.4,GSM7324-QOS-DIFFSERV-PRIVATE-MIB::agentDiffServPolicyPerfInDiscardedPackets,Counter32,read-only,,current,,Discarded packets count for the inbound policy-class instance performance  entry.
.1.3.6.1.4.1.4526.1.7.3.4.3.5.1.5,GSM7324-QOS-DIFFSERV-PRIVATE-MIB::agentDiffServPolicyPerfInHCOfferedOctets,Counter64,read-only,,current,,Offered octets high capacity count for the inbound policy-class instance  performance entry.
.1.3.6.1.4.1.4526.1.7.3.4.3.5.1.6,GSM7324-QOS-DIFFSERV-PRIVATE-MIB::agentDiffServPolicyPerfInHCOfferedPackets,Counter64,read-only,,current,,Offered packets high capacity count for the inbound policy-class instance  performance entry.
.1.3.6.1.4.1.4526.1.7.3.4.3.5.1.7,GSM7324-QOS-DIFFSERV-PRIVATE-MIB::agentDiffServPolicyPerfInHCDiscardedOctets,Counter64,read-only,,current,,Discarded octets high capacity count for the inbound policy-class instance  performance entry.
.1.3.6.1.4.1.4526.1.7.3.4.3.5.1.8,GSM7324-QOS-DIFFSERV-PRIVATE-MIB::agentDiffServPolicyPerfInHCDiscardedPackets,Counter64,read-only,,current,,Discarded packets high capacity count for the inbound policy-class  instance performance entry.
.1.3.6.1.4.1.4526.1.7.3.4.3.5.1.9,GSM7324-QOS-DIFFSERV-PRIVATE-MIB::agentDiffServPolicyPerfInStorageType,INTEGER,read-only,,current,other(1):volatile(2):nonVolatile(3):permanent(4):readOnly(5),Storage-type for this conceptual row.
.1.3.6.1.4.1.4526.1.7.3.4.3.5.1.10,GSM7324-QOS-DIFFSERV-PRIVATE-MIB::agentDiffServPolicyPerfInRowStatus,INTEGER,read-only,,current,active(1):notInService(2):notReady(3):createAndGo(4):createAndWait(5):destroy(6),The status of this conceptual row.
.1.3.6.1.4.1.4526.1.7.3.4.3.6,GSM7324-QOS-DIFFSERV-PRIVATE-MIB::agentDiffServPolicyPerfOutTable,,not-accessible,,current,,A table of outbound policy-class performance entries
.1.3.6.1.4.1.4526.1.7.3.4.3.6.1,GSM7324-QOS-DIFFSERV-PRIVATE-MIB::agentDiffServPolicyPerfOutEntry,,not-accessible,agentDiffServPolicyIndex:agentDiffServPolicyInstIndex:ifIndex,current,,Represents entry for the performance attributes of the associated outbound 
.1.3.6.1.4.1.4526.1.7.3.4.3.6.1.1,GSM7324-QOS-DIFFSERV-PRIVATE-MIB::agentDiffServPolicyPerfOutTailDroppedOctets,Counter32,read-only,,current,,Tail-dropped octets count for the outbound policy-class instance  performance entry.
.1.3.6.1.4.1.4526.1.7.3.4.3.6.1.2,GSM7324-QOS-DIFFSERV-PRIVATE-MIB::agentDiffServPolicyPerfOutTailDroppedPackets,Counter32,read-only,,current,,Tail-dropped packets count for the outbound policy-class instance  performance entry.
.1.3.6.1.4.1.4526.1.7.3.4.3.6.1.3,GSM7324-QOS-DIFFSERV-PRIVATE-MIB::agentDiffServPolicyPerfOutRandomDroppedOctets,Counter32,read-only,,current,,Random-dropped octets count for the outbound policy-class instance  performance entry.
.1.3.6.1.4.1.4526.1.7.3.4.3.6.1.4,GSM7324-QOS-DIFFSERV-PRIVATE-MIB::agentDiffServPolicyPerfOutRandomDroppedPackets,Counter32,read-only,,current,,Random-dropped packets count for the outbound policy-class instance  performance entry.
.1.3.6.1.4.1.4526.1.7.3.4.3.6.1.5,GSM7324-QOS-DIFFSERV-PRIVATE-MIB::agentDiffServPolicyPerfOutShapeDelayedOctets,Counter32,read-only,,current,,Shape-delayed octets count for the outbound policy-class instance  performance entry.
.1.3.6.1.4.1.4526.1.7.3.4.3.6.1.6,GSM7324-QOS-DIFFSERV-PRIVATE-MIB::agentDiffServPolicyPerfOutShapeDelayedPackets,Counter32,read-only,,current,,Shape-delayed packets count for the outbound policy-class instance  performance entry.
.1.3.6.1.4.1.4526.1.7.3.4.3.6.1.7,GSM7324-QOS-DIFFSERV-PRIVATE-MIB::agentDiffServPolicyPerfOutSentOctets,Counter32,read-only,,current,,Sent octets count for the outbound policy-class instance performance  entry.
.1.3.6.1.4.1.4526.1.7.3.4.3.6.1.8,GSM7324-QOS-DIFFSERV-PRIVATE-MIB::agentDiffServPolicyPerfOutSentPackets,Counter32,read-only,,current,,Sent packets count for the outbound policy-class instance performance  entry.
.1.3.6.1.4.1.4526.1.7.3.4.3.6.1.9,GSM7324-QOS-DIFFSERV-PRIVATE-MIB::agentDiffServPolicyPerfOutHCTailDroppedOctets,Counter64,read-only,,current,,Tail-dropped octets high capacity count for the outbound policy-class  instance performance entry.
.1.3.6.1.4.1.4526.1.7.3.4.3.6.1.10,GSM7324-QOS-DIFFSERV-PRIVATE-MIB::agentDiffServPolicyPerfOutHCTailDroppedPackets,Counter64,read-only,,current,,Tail-dropped packets high capacity count for the outbound policy-class  instance performance entry.
.1.3.6.1.4.1.4526.1.7.3.4.3.6.1.11,GSM7324-QOS-DIFFSERV-PRIVATE-MIB::agentDiffServPolicyPerfOutHCRandomDroppedOctets,Counter64,read-only,,current,,Random-dropped octets high capacity count for the outbound policy-class  instance performance entry.
.1.3.6.1.4.1.4526.1.7.3.4.3.6.1.12,GSM7324-QOS-DIFFSERV-PRIVATE-MIB::agentDiffServPolicyPerfOutHCRandomDroppedPackets,Counter64,read-only,,current,,Random-dropped packets high capacity count for the outbound policy-class  instance performance entry.
.1.3.6.1.4.1.4526.1.7.3.4.3.6.1.13,GSM7324-QOS-DIFFSERV-PRIVATE-MIB::agentDiffServPolicyPerfOutHCShapeDelayedOctets,Counter64,read-only,,current,,Shape-delayed octets high capacity count for the outbound policy-class  instance performance entry.
.1.3.6.1.4.1.4526.1.7.3.4.3.6.1.14,GSM7324-QOS-DIFFSERV-PRIVATE-MIB::agentDiffServPolicyPerfOutHCShapeDelayedPackets,Counter64,read-only,,current,,Shape-delayed packets high capacity count for the outbound policy-class  instance performance entry.
.1.3.6.1.4.1.4526.1.7.3.4.3.6.1.15,GSM7324-QOS-DIFFSERV-PRIVATE-MIB::agentDiffServPolicyPerfOutHCSentOctets,Counter64,read-only,,current,,Sent octets high capacity count for the outbound policy-class instance  performance entry.
.1.3.6.1.4.1.4526.1.7.3.4.3.6.1.16,GSM7324-QOS-DIFFSERV-PRIVATE-MIB::agentDiffServPolicyPerfOutHCSentPackets,Counter64,read-only,,current,,Sent packets high capacity count for the outbound policy-class instance  performance entry.
.1.3.6.1.4.1.4526.1.7.3.4.3.6.1.17,GSM7324-QOS-DIFFSERV-PRIVATE-MIB::agentDiffServPolicyPerfOutStorageType,INTEGER,read-only,,current,other(1):volatile(2):nonVolatile(3):permanent(4):readOnly(5),Storage-type for this conceptual row.
.1.3.6.1.4.1.4526.1.7.3.4.3.6.1.18,GSM7324-QOS-DIFFSERV-PRIVATE-MIB::agentDiffServPolicyPerfOutRowStatus,INTEGER,read-only,,current,active(1):notInService(2):notReady(3):createAndGo(4):createAndWait(5):destroy(6),The status of this conceptual row.
.1.3.6.1.4.1.4526.1.7.3.4.4,GSM7324-QOS-DIFFSERV-PRIVATE-MIB::agentDiffServServiceGroup,,,,,,
.1.3.6.1.4.1.4526.1.7.3.4.4.1,GSM7324-QOS-DIFFSERV-PRIVATE-MIB::agentDiffServServiceTable,,not-accessible,,current,,A table of the service entries.
.1.3.6.1.4.1.4526.1.7.3.4.4.1.1,GSM7324-QOS-DIFFSERV-PRIVATE-MIB::agentDiffServServiceEntry,,not-accessible,agentDiffServServiceIfIndex:agentDiffServServiceIfDirection,current,,Represents entry for policy assigned to an interface in a particular  direction.
.1.3.6.1.4.1.4526.1.7.3.4.4.1.1.1,GSM7324-QOS-DIFFSERV-PRIVATE-MIB::agentDiffServServiceIfIndex,Integer32,not-accessible,,current,,External interface number of the interface to which policy is assigned.
.1.3.6.1.4.1.4526.1.7.3.4.4.1.1.2,GSM7324-QOS-DIFFSERV-PRIVATE-MIB::agentDiffServServiceIfDirection,INTEGER,not-accessible,,current,in(1):out(2),Interface direction to which the policy is assigned.
.1.3.6.1.4.1.4526.1.7.3.4.4.1.1.3,GSM7324-QOS-DIFFSERV-PRIVATE-MIB::agentDiffServServicePolicyIndex,Unsigned32,read-create,,current,,Index of the Policy Table row whose policy definition is attached to the  interface in the specified direction.
.1.3.6.1.4.1.4526.1.7.3.4.4.1.1.4,GSM7324-QOS-DIFFSERV-PRIVATE-MIB::agentDiffServServiceIfOperStatus,INTEGER,read-only,,current,up(1):down(2),The current operational state of the DiffServ service 
.1.3.6.1.4.1.4526.1.7.3.4.4.1.1.5,GSM7324-QOS-DIFFSERV-PRIVATE-MIB::agentDiffServServiceStorageType,INTEGER,read-create,,current,other(1):volatile(2):nonVolatile(3):permanent(4):readOnly(5),Storage-type for this conceptual row
.1.3.6.1.4.1.4526.1.7.3.4.4.1.1.6,GSM7324-QOS-DIFFSERV-PRIVATE-MIB::agentDiffServServiceRowStatus,INTEGER,read-create,,current,active(1):notInService(2):notReady(3):createAndGo(4):createAndWait(5):destroy(6),The status of this conceptual row.
.1.3.6.1.4.1.4526.1.7.3.4.4.2,GSM7324-QOS-DIFFSERV-PRIVATE-MIB::agentDiffServServicePerfTable,,not-accessible,,current,,A table of service performance entries.
.1.3.6.1.4.1.4526.1.7.3.4.4.2.1,GSM7324-QOS-DIFFSERV-PRIVATE-MIB::agentDiffServServicePerfEntry,,not-accessible,,current,,Represents a service performance entry.
.1.3.6.1.4.1.4526.1.7.3.4.4.2.1.1,GSM7324-QOS-DIFFSERV-PRIVATE-MIB::agentDiffServServicePerfOfferedOctets,Counter32,read-only,,current,,Offered octets count for the specified service interface and direction
.1.3.6.1.4.1.4526.1.7.3.4.4.2.1.2,GSM7324-QOS-DIFFSERV-PRIVATE-MIB::agentDiffServServicePerfOfferedPackets,Counter32,read-only,,current,,Offered packets count for specified service interface and direction
.1.3.6.1.4.1.4526.1.7.3.4.4.2.1.3,GSM7324-QOS-DIFFSERV-PRIVATE-MIB::agentDiffServServicePerfDiscardedOctets,Counter32,read-only,,current,,Discarded octets count for the specified service interface and direction
.1.3.6.1.4.1.4526.1.7.3.4.4.2.1.4,GSM7324-QOS-DIFFSERV-PRIVATE-MIB::agentDiffServServicePerfDiscardedPackets,Counter32,read-only,,current,,Discarded packets count for the specified service interface and direction
.1.3.6.1.4.1.4526.1.7.3.4.4.2.1.5,GSM7324-QOS-DIFFSERV-PRIVATE-MIB::agentDiffServServicePerfSentOctets,Counter32,read-only,,current,,Sent octets count for the specified service interface and direction
.1.3.6.1.4.1.4526.1.7.3.4.4.2.1.6,GSM7324-QOS-DIFFSERV-PRIVATE-MIB::agentDiffServServicePerfSentPackets,Counter32,read-only,,current,,Sent packets count for the specified service interface and direction
.1.3.6.1.4.1.4526.1.7.3.4.4.2.1.7,GSM7324-QOS-DIFFSERV-PRIVATE-MIB::agentDiffServServicePerfHCOfferedOctets,Counter64,read-only,,current,,Offered octets high capacity count for the specified service interface  and direction
.1.3.6.1.4.1.4526.1.7.3.4.4.2.1.8,GSM7324-QOS-DIFFSERV-PRIVATE-MIB::agentDiffServServicePerfHCOfferedPackets,Counter64,read-only,,current,,Offered packets high capacity count for the specified service interface  and direction
.1.3.6.1.4.1.4526.1.7.3.4.4.2.1.9,GSM7324-QOS-DIFFSERV-PRIVATE-MIB::agentDiffServServicePerfHCDiscardedOctets,Counter64,read-only,,current,,Discarded octets high capacity count for the specified service interface  and direction
.1.3.6.1.4.1.4526.1.7.3.4.4.2.1.10,GSM7324-QOS-DIFFSERV-PRIVATE-MIB::agentDiffServServicePerfHCDiscardedPackets,Counter64,read-only,,current,,Discarded packets high capacity count for the specified service interface  and direction
.1.3.6.1.4.1.4526.1.7.3.4.4.2.1.11,GSM7324-QOS-DIFFSERV-PRIVATE-MIB::agentDiffServServicePerfHCSentOctets,Counter64,read-only,,current,,Sent octets high capacity count for the specified service interface and  direction
.1.3.6.1.4.1.4526.1.7.3.4.4.2.1.12,GSM7324-QOS-DIFFSERV-PRIVATE-MIB::agentDiffServServicePerfHCSentPackets,Counter64,read-only,,current,,Sent packets high capacity count for the specified service interface and  direction
.1.3.6.1.4.1.4526.1.7.8,GSM7324-RADIUS-MIB::gsm7324Radius,,,,,,The GSM7324 Radius MIB
.1.3.6.1.4.1.4526.1.7.8.1,GSM7324-RADIUS-MIB::agentRadiusConfigGroup,,,,,,
.1.3.6.1.4.1.4526.1.7.8.1.1,GSM7324-RADIUS-MIB::agentRadiusMaxTransmit,Unsigned32,read-write,,current,,Maximum number of retransmissions of a RADIUS request packet
.1.3.6.1.4.1.4526.1.7.8.1.2,GSM7324-RADIUS-MIB::agentRadiusTimeout,Unsigned32,read-write,,current,,Time out duration (in seconds) before packets are retransmitted
.1.3.6.1.4.1.4526.1.7.8.1.3,GSM7324-RADIUS-MIB::agentRadiusAccountingMode,INTEGER,read-write,,current,enable(1):disable(2),Identifies if RADIUS Accounting has been enabled or not
.1.3.6.1.4.1.4526.1.7.8.1.4,GSM7324-RADIUS-MIB::agentRadiusStatsClear,INTEGER,read-write,,current,enable(1):disable(2),When set to enable(1), all Radius statistics will be reset.
.1.3.6.1.4.1.4526.1.7.8.1.5,GSM7324-RADIUS-MIB::agentRadiusAccountingIndexNextValid,Integer32,read-only,,current,,Indicates the next valid index into the agentRadiusAccountingConfigTable  for creation. If no additional entries are allowed, this will be 0.
.1.3.6.1.4.1.4526.1.7.8.1.6,GSM7324-RADIUS-MIB::agentRadiusAccountingConfigTable,,not-accessible,,current,,Table with information about Radius Accounting Server IP Addresses, port numbers and shared secret. Only one entry is supported at this time.
.1.3.6.1.4.1.4526.1.7.8.1.6.1,GSM7324-RADIUS-MIB::agentRadiusAccountingConfigEntry,,not-accessible,agentRadiusAccountingServerIndex,current,,Entry consisting of configuration data for a Radius Accounting Server.
.1.3.6.1.4.1.4526.1.7.8.1.6.1.1,GSM7324-RADIUS-MIB::agentRadiusAccountingServerIndex,Integer32,not-accessible,,current,,Unique index of the configured RADIUS accounting server
.1.3.6.1.4.1.4526.1.7.8.1.6.1.2,GSM7324-RADIUS-MIB::agentRadiusAccountingServerAddress,IpAddress,read-create,,current,,IP Address of the configured RADIUS accounting server. This object cannot be changed after creation.
.1.3.6.1.4.1.4526.1.7.8.1.6.1.3,GSM7324-RADIUS-MIB::agentRadiusAccountingPort,Unsigned32,read-write,,current,,Port number for the RADIUS accounting server. This object cannot be configured on row creation.
.1.3.6.1.4.1.4526.1.7.8.1.6.1.4,GSM7324-RADIUS-MIB::agentRadiusAccountingSecret,OCTET,read-write,,current,,Configured shared sercret for the RADIUS accounting server. This object cannot be configured on row creation.
.1.3.6.1.4.1.4526.1.7.8.1.6.1.5,GSM7324-RADIUS-MIB::agentRadiusAccountingStatus,INTEGER,read-create,,current,active(1):notInService(2):notReady(3):createAndGo(4):createAndWait(5):destroy(6),
.1.3.6.1.4.1.4526.1.7.8.1.7,GSM7324-RADIUS-MIB::agentRadiusServerIndexNextValid,Integer32,read-only,,current,,Indicates the next valid index into the agentRadiusServerConfigTable  for creation. If no additional entries are allowed, this will be 0.
.1.3.6.1.4.1.4526.1.7.8.1.8,GSM7324-RADIUS-MIB::agentRadiusServerConfigTable,,not-accessible,,current,,Table with information about Radius Accounting Server IP Addresses, port numbers and shared secret
.1.3.6.1.4.1.4526.1.7.8.1.8.1,GSM7324-RADIUS-MIB::agentRadiusServerConfigEntry,,not-accessible,agentRadiusServerIndex,current,,Entry consisting of configuration data for a Radius Server. Creation requires setting 
.1.3.6.1.4.1.4526.1.7.8.1.8.1.1,GSM7324-RADIUS-MIB::agentRadiusServerIndex,Integer32,not-accessible,,current,,Unique index of the configured RADIUS server
.1.3.6.1.4.1.4526.1.7.8.1.8.1.2,GSM7324-RADIUS-MIB::agentRadiusServerAddress,IpAddress,read-create,,current,,IP Address of the configured RADIUS server. This object cannot be changed after creation.
.1.3.6.1.4.1.4526.1.7.8.1.8.1.3,GSM7324-RADIUS-MIB::agentRadiusServerPort,Unsigned32,read-write,,current,,Port number for the RADIUS server. This object cannot be configured on row creation.
.1.3.6.1.4.1.4526.1.7.8.1.8.1.4,GSM7324-RADIUS-MIB::agentRadiusServerSecret,OCTET,read-write,,current,,Configured shared sercret for the RADIUS server. This object cannot be configured on row creation.
.1.3.6.1.4.1.4526.1.7.8.1.8.1.5,GSM7324-RADIUS-MIB::agentRadiusServerPrimaryMode,INTEGER,read-write,,current,enable(1):disable(2),Configure the RADIUS server to be the primary server. If there is any  other server that is configured to be primary, that server is set to be  a seconday server and this entry is set Primary. This object cannot be configured on row creation.
.1.3.6.1.4.1.4526.1.7.8.1.8.1.6,GSM7324-RADIUS-MIB::agentRadiusServerCurrentMode,INTEGER,read-only,,current,yes(1):no(2),Indicate if the RADIUS server is the current server in user for authentication.
.1.3.6.1.4.1.4526.1.7.8.1.8.1.7,GSM7324-RADIUS-MIB::agentRadiusServerMsgAuth,INTEGER,read-write,,current,enable(1):disable(2),Enable or disable the message authenticator attribute for this  RADIUS server. This object cannot be configured on row creation.
.1.3.6.1.4.1.4526.1.7.8.1.8.1.8,GSM7324-RADIUS-MIB::agentRadiusServerStatus,INTEGER,read-create,,current,active(1):notInService(2):notReady(3):createAndGo(4):createAndWait(5):destroy(6),
.1.3.6.1.4.1.4526.1.7.11,GSM7324-MGMT-SECURITY-MIB::gsm7324MgmtSecurity,,,,,,
.1.3.6.1.4.1.4526.1.7.11.1,GSM7324-MGMT-SECURITY-MIB::agentSSLConfigGroup,,,,,,
.1.3.6.1.4.1.4526.1.7.11.1.1,GSM7324-MGMT-SECURITY-MIB::agentSSLAdminMode,INTEGER,read-write,,current,enable(1):disable(2),Configures whether the SSL service is enabled on this switch. The default value is disable(2).
.1.3.6.1.4.1.4526.1.7.11.1.2,GSM7324-MGMT-SECURITY-MIB::agentSSLSecurePort,Integer32,read-write,,current,,Configures the port the SSL service will respond on. The default  value is 443.
.1.3.6.1.4.1.4526.1.7.11.1.3,GSM7324-MGMT-SECURITY-MIB::agentSSLProtocolLevel,INTEGER,read-write,,current,ssl30(1):tls10(2):both(3),Configures which protocol versions of SSL are enabled on this switch. The default value is both(3).
.1.3.6.1.4.1.4526.1.7.11.2,GSM7324-MGMT-SECURITY-MIB::agentSSHConfigGroup,,,,,,
.1.3.6.1.4.1.4526.1.7.11.2.1,GSM7324-MGMT-SECURITY-MIB::agentSSHAdminMode,INTEGER,read-write,,current,enable(1):disable(2),Configures whether the SSH service is enabled on this switch. The default value is disable(2).
.1.3.6.1.4.1.4526.1.7.11.2.2,GSM7324-MGMT-SECURITY-MIB::agentSSHProtocolLevel,INTEGER,read-write,,current,ssh10(1):ssh20(2):both(3),Configures which protocol versions of SSH are enabled on this switch. The default value is both(3).
.1.3.6.1.4.1.4526.1.7.11.2.3,GSM7324-MGMT-SECURITY-MIB::agentSSHSessionsCount,Integer32,read-only,,current,,Current number of active SSH sessions on this switch.
.1.3.6.1.4.1.4526.1.8,BROADCOM-REF-MIB::gsm7224,,,,,,
.1.3.6.1.4.1.4526.1.8.1,GSM7224-SWITCHING-MIB::gsm7224Switching,,,,,,
.1.3.6.1.4.1.4526.1.8.1.1,GSM7224-SWITCHING-MIB::agentInfoGroup,,,,,,
.1.3.6.1.4.1.4526.1.8.1.1.1,GSM7224-SWITCHING-MIB::agentInventoryGroup,,,,,,
.1.3.6.1.4.1.4526.1.8.1.1.1.1,GSM7224-SWITCHING-MIB::agentInventorySysDescription,OCTET,read-only,,current,,The switch's Inventory system description. 
.1.3.6.1.4.1.4526.1.8.1.1.1.2,GSM7224-SWITCHING-MIB::agentInventoryMachineType,OCTET,read-only,,current,,Type of the Machine used in the Switch 
.1.3.6.1.4.1.4526.1.8.1.1.1.3,GSM7224-SWITCHING-MIB::agentInventoryBurnedInMacAddress,OCTET,read-only,,current,,Burned-In MAC Address
.1.3.6.1.4.1.4526.1.8.1.1.1.4,GSM7224-SWITCHING-MIB::agentInventoryAdditionalPackages,OCTET,read-only,,current,,Lists additional functional packages available on this unit.
.1.3.6.1.4.1.4526.1.8.1.1.1.5,GSM7224-SWITCHING-MIB::agentInventorySoftwareVersion,OCTET,read-only,,current,,Lists the version of software loaded on this unit.
.1.3.6.1.4.1.4526.1.8.1.1.2,GSM7224-SWITCHING-MIB::agentTrapLogGroup,,,,,,
.1.3.6.1.4.1.4526.1.8.1.1.2.1,GSM7224-SWITCHING-MIB::agentTrapLogTotal,Integer32,read-only,,current,,The total number of traps sent since last reset.
.1.3.6.1.4.1.4526.1.8.1.1.2.3,GSM7224-SWITCHING-MIB::agentTrapLogTotalSinceLastViewed,Integer32,read-only,,deprecated,,The number of traps sent since last viewed.
.1.3.6.1.4.1.4526.1.8.1.1.2.4,GSM7224-SWITCHING-MIB::agentTrapLogTable,,not-accessible,,current,,Agent Trap Log
.1.3.6.1.4.1.4526.1.8.1.1.2.4.1,GSM7224-SWITCHING-MIB::agentTrapLogEntry,,not-accessible,agentTrapLogIndex,current,,Agent trap log entry
.1.3.6.1.4.1.4526.1.8.1.1.2.4.1.1,GSM7224-SWITCHING-MIB::agentTrapLogIndex,Integer32,read-only,,current,,Unique index of trap entry
.1.3.6.1.4.1.4526.1.8.1.1.2.4.1.2,GSM7224-SWITCHING-MIB::agentTrapLogSystemTime,OCTET,read-only,,current,,System uptime when trap was sent.  This entry shows how long the system has been up when the trap occurred.
.1.3.6.1.4.1.4526.1.8.1.1.2.4.1.3,GSM7224-SWITCHING-MIB::agentTrapLogTrap,OCTET,read-only,,current,,Description of the trap sent.
.1.3.6.1.4.1.4526.1.8.1.1.3,GSM7224-SWITCHING-MIB::agentSupportedMibTable,,not-accessible,,current,,Supported MIB table
.1.3.6.1.4.1.4526.1.8.1.1.3.1,GSM7224-SWITCHING-MIB::agentSupportedMibEntry,,not-accessible,agentSupportedMibIndex,current,,Supported MIB entry
.1.3.6.1.4.1.4526.1.8.1.1.3.1.1,GSM7224-SWITCHING-MIB::agentSupportedMibIndex,Integer32,read-only,,current,,Unique index of the Supported MIB entry
.1.3.6.1.4.1.4526.1.8.1.1.3.1.2,GSM7224-SWITCHING-MIB::agentSupportedMibName,OCTET,read-only,,current,,The name of the MIB (RFC or IEEE) that is supported.
.1.3.6.1.4.1.4526.1.8.1.1.3.1.3,GSM7224-SWITCHING-MIB::agentSupportedMibDescription,OCTET,read-only,,current,,Description of the MIB (RFC or IEEE) that is supported.
.1.3.6.1.4.1.4526.1.8.1.2,GSM7224-SWITCHING-MIB::agentConfigGroup,,,,,,
.1.3.6.1.4.1.4526.1.8.1.2.1,GSM7224-SWITCHING-MIB::agentCLIConfigGroup,,,,,,
.1.3.6.1.4.1.4526.1.8.1.2.1.1,GSM7224-SWITCHING-MIB::agentLoginSessionTable,,not-accessible,,current,,A table of the switch's login session
.1.3.6.1.4.1.4526.1.8.1.2.1.1.1,GSM7224-SWITCHING-MIB::agentLoginSessionEntry,,not-accessible,agentLoginSessionIndex,current,,Login Session Entry
.1.3.6.1.4.1.4526.1.8.1.2.1.1.1.1,GSM7224-SWITCHING-MIB::agentLoginSessionIndex,Integer32,read-only,,current,,Agent Login Session Index of the switch
.1.3.6.1.4.1.4526.1.8.1.2.1.1.1.2,GSM7224-SWITCHING-MIB::agentLoginSessionUserName,OCTET,read-only,,current,,Agent Login Session UserName of the switch
.1.3.6.1.4.1.4526.1.8.1.2.1.1.1.3,GSM7224-SWITCHING-MIB::agentLoginSessionIPAddress,IpAddress,read-only,,current,,Agent Login Session IP Address of the switch
.1.3.6.1.4.1.4526.1.8.1.2.1.1.1.4,GSM7224-SWITCHING-MIB::agentLoginSessionConnectionType,INTEGER,read-only,,current,serial(1):telnet(2),Agent Login Session Connection Type of the switch
.1.3.6.1.4.1.4526.1.8.1.2.1.1.1.5,GSM7224-SWITCHING-MIB::agentLoginSessionIdleTime,TimeTicks,read-only,,current,,Agent Login Session Idle Time of the switch
.1.3.6.1.4.1.4526.1.8.1.2.1.1.1.6,GSM7224-SWITCHING-MIB::agentLoginSessionSessionTime,TimeTicks,read-only,,current,,Agent Login Session Time of the switch
.1.3.6.1.4.1.4526.1.8.1.2.1.1.1.7,GSM7224-SWITCHING-MIB::agentLoginSessionStatus,INTEGER,read-write,,current,active(1):notInService(2):notReady(3):createAndGo(4):createAndWait(5):destroy(6),Status of the user. active(1) - This connection is active. destroy(6) - Set to this value to disconnect this user.
.1.3.6.1.4.1.4526.1.8.1.2.1.2,GSM7224-SWITCHING-MIB::agentTelnetConfigGroup,,,,,,
.1.3.6.1.4.1.4526.1.8.1.2.1.2.1,GSM7224-SWITCHING-MIB::agentTelnetLoginTimeout,Integer32,read-write,,current,,Telnet login timeout (minutes)  Config telnet timeout will set the telnet session timeout value.  A session is active as long as the session has not remained idle for  the value set. Specify a value from 0 to 160.  A value of 0 indicates that a Telnet session remains active indefinitely.  Note: Changing the timeout value for active  sessions does not become effective until the session is reaccessed.  Any keystroke will also activate the new timeout duration.
.1.3.6.1.4.1.4526.1.8.1.2.1.2.2,GSM7224-SWITCHING-MIB::agentTelnetMaxSessions,Integer32,read-write,,current,,Maximum number of Telnet Sessions Config telnet maxsessions is an integer value from 0 to 5 that specifies the maximum number of telnet sessions that can be established.  If the value is 0, no Telnet session can be established.  
.1.3.6.1.4.1.4526.1.8.1.2.1.2.3,GSM7224-SWITCHING-MIB::agentTelnetAllowNewMode,INTEGER,read-write,,current,enable(1):disable(2),Allow new telnet sessions (enable or disable) Config telnet disable means that no new Telnet sessions are to be  established. Any already established session remains active until  the session is ended or an abnormal network error ends it.  
.1.3.6.1.4.1.4526.1.8.1.2.1.3,GSM7224-SWITCHING-MIB::agentUserConfigGroup,,,,,,
.1.3.6.1.4.1.4526.1.8.1.2.1.3.1,GSM7224-SWITCHING-MIB::agentUserConfigCreate,OCTET,read-write,,current,,Create a new user. When set with a non-empty string, a new user with that name will be created. This object will only return an empty string. This string is limited to alpha-numeric strings (uncluding the '-' and '_' characters).
.1.3.6.1.4.1.4526.1.8.1.2.1.3.2,GSM7224-SWITCHING-MIB::agentUserConfigTable,,not-accessible,,current,,User Config Table
.1.3.6.1.4.1.4526.1.8.1.2.1.3.2.1,GSM7224-SWITCHING-MIB::agentUserConfigEntry,,not-accessible,agentUserIndex,current,,User Config Entry
.1.3.6.1.4.1.4526.1.8.1.2.1.3.2.1.1,GSM7224-SWITCHING-MIB::agentUserIndex,Integer32,not-accessible,,current,,Agent User Config Index
.1.3.6.1.4.1.4526.1.8.1.2.1.3.2.1.2,GSM7224-SWITCHING-MIB::agentUserName,OCTET,read-write,,current,,Agent User Name. This string is limited to alpha-numeric strings (including the '-' and '_' characters).
.1.3.6.1.4.1.4526.1.8.1.2.1.3.2.1.3,GSM7224-SWITCHING-MIB::agentUserPassword,OCTET,read-write,,current,,Agent User Password This object will return an empty string even if a password is set.
.1.3.6.1.4.1.4526.1.8.1.2.1.3.2.1.4,GSM7224-SWITCHING-MIB::agentUserAccessMode,INTEGER,read-only,,current,read(1):write(2),Agent User Access Mode
.1.3.6.1.4.1.4526.1.8.1.2.1.3.2.1.5,GSM7224-SWITCHING-MIB::agentUserStatus,INTEGER,read-write,,current,active(1):notInService(2):notReady(3):createAndGo(4):createAndWait(5):destroy(6),Agent User Status. active(1) - This user account is active. destroy(6) - Set to this value to remove this user account.
.1.3.6.1.4.1.4526.1.8.1.2.1.3.2.1.6,GSM7224-SWITCHING-MIB::agentUserAuthenticationType,INTEGER,read-write,,current,none(1):hmacmd5(2):hmacsha(3),SNMPv3 User Authentication. The user passsword must be set to a string greater than or equal to 8 characters for this to be set to anything but none(1).  none(1) - no authentication used hmacmd5(1) - Use HMAC-MD5 authentication hmacsha(1) - Use HMAC-SHA authentication
.1.3.6.1.4.1.4526.1.8.1.2.1.3.2.1.7,GSM7224-SWITCHING-MIB::agentUserEncryptionType,INTEGER,read-write,,current,none(1):des(2),SNMPv3 User Encryption Can not be set to des(2) if agentUserAuthenticationType is set to none(1).  none(1) - no encryption used des(2) - DES encryption used
.1.3.6.1.4.1.4526.1.8.1.2.1.3.2.1.8,GSM7224-SWITCHING-MIB::agentUserEncryptionPassword,OCTET,read-write,,current,,SNMPv3 User Encryption Password This object will return an empty string even if a password is  set. agentUserEncryptionType must be set to des(2) before this object can be configured. This object will return an empty string even if a password is set.
.1.3.6.1.4.1.4526.1.8.1.2.1.5,GSM7224-SWITCHING-MIB::agentSerialGroup,,,,,,
.1.3.6.1.4.1.4526.1.8.1.2.1.5.1,GSM7224-SWITCHING-MIB::agentSerialTimeout,Integer32,read-write,,current,,agentSerialTimeout specifies the maximum connect time(in minutes)  without console activity. A value of 0 indicates that a console can  be connected indefinitely. The time range is 0 to 160. 
.1.3.6.1.4.1.4526.1.8.1.2.1.5.2,GSM7224-SWITCHING-MIB::agentSerialBaudrate,INTEGER,read-write,,current,baud-1200(1):baud-2400(2):baud-4800(3):baud-9600(4):baud-19200(5):baud-38400(6):baud-57600(7):baud-115200(8), agentSerialBaudrate specifies the current baud rate at which  the serial port will try to connect. The available values  are 1200, 2400, 4800, 9600, 19200, 38400,57600, and 115200 baud. 
.1.3.6.1.4.1.4526.1.8.1.2.1.5.3,GSM7224-SWITCHING-MIB::agentSerialCharacterSize,Integer32,read-only,,current,,agentSerialCharacterSize specifies the number of bits in  a character. The number of bits is always 8.
.1.3.6.1.4.1.4526.1.8.1.2.1.5.4,GSM7224-SWITCHING-MIB::agentSerialHWFlowControlMode,INTEGER,read-only,,current,enable(1):disable(2),agentSerialHardwareFlowControl specifies whether hardware  flow-control is enabled or disabled. Hardware Flow Control is  always disabled.
.1.3.6.1.4.1.4526.1.8.1.2.1.5.5,GSM7224-SWITCHING-MIB::agentSerialStopBits,Integer32,read-only,,current,, agentSerialStopBits specifies the number of Stop bits per  character. The number of Stop bits is always 1.
.1.3.6.1.4.1.4526.1.8.1.2.1.5.6,GSM7224-SWITCHING-MIB::agentSerialParityType,INTEGER,read-only,,current,even(1):odd(2):none(3), agentSerialParityType specifies the Parity Method used on  the Serial Port. The Parity Method is always None. 
.1.3.6.1.4.1.4526.1.8.1.2.2,GSM7224-SWITCHING-MIB::agentLagConfigGroup,,,,,,
.1.3.6.1.4.1.4526.1.8.1.2.2.1,GSM7224-SWITCHING-MIB::agentLagConfigCreate,OCTET,read-write,,current,,Agent LAG Create. When this object is set with a non-empty string, a new LAG will be created  if possible with the entered string as its name.
.1.3.6.1.4.1.4526.1.8.1.2.2.2,GSM7224-SWITCHING-MIB::agentLagSummaryConfigTable,,not-accessible,,current,,A summary table of the switch's LAG config entries
.1.3.6.1.4.1.4526.1.8.1.2.2.2.1,GSM7224-SWITCHING-MIB::agentLagSummaryConfigEntry,,not-accessible,agentLagSummaryLagIndex,current,,Switch's LAG config entry
.1.3.6.1.4.1.4526.1.8.1.2.2.2.1.1,GSM7224-SWITCHING-MIB::agentLagSummaryLagIndex,Integer32,read-only,,current,,Agent LAG IfIndex.  This value corresponds with the LAG interface in the ifTable.
.1.3.6.1.4.1.4526.1.8.1.2.2.2.1.2,GSM7224-SWITCHING-MIB::agentLagSummaryName,OCTET,read-write,,current,,Agent LAG Name.  The associated name of the LAG used during creation.
.1.3.6.1.4.1.4526.1.8.1.2.2.2.1.3,GSM7224-SWITCHING-MIB::agentLagSummaryFlushTimer,Integer32,read-write,,obsolete,,Agent LAG FlushTimer.
.1.3.6.1.4.1.4526.1.8.1.2.2.2.1.4,GSM7224-SWITCHING-MIB::agentLagSummaryLinkTrap,INTEGER,read-write,,current,enable(1):disable(2),Agent LAG LinkTrap.  Configures sending Link Up/Down traps when the LAG interface goes Up or Down.
.1.3.6.1.4.1.4526.1.8.1.2.2.2.1.5,GSM7224-SWITCHING-MIB::agentLagSummaryAdminMode,INTEGER,read-write,,current,enable(1):disable(2),Agent LAG AdminMode.  Administratively enables or disables this LAG interface.
.1.3.6.1.4.1.4526.1.8.1.2.2.2.1.6,GSM7224-SWITCHING-MIB::agentLagSummaryStpMode,INTEGER,read-write,,current,dot1d(1):fast(2):off(3):dot1s(4),Agent LAG StpMode  If Dot1d is enabled, the valid values are: dot1d(1), fast(2), and off(3)  If Dot1s is enabled, the valid values are: off(3) and dot1s(4)
.1.3.6.1.4.1.4526.1.8.1.2.2.2.1.7,GSM7224-SWITCHING-MIB::agentLagSummaryAddPort,Integer32,read-write,,current,,Agent LAG AddPort.   Set to a non 0 value to add a port to the LAG. Values correspond to ifIndex values in the ifTable.  Note: agentPortType for the port to be added must be full duplex and the same speed as previously added port(s), if any.
.1.3.6.1.4.1.4526.1.8.1.2.2.2.1.8,GSM7224-SWITCHING-MIB::agentLagSummaryDeletePort,Integer32,read-write,,current,,Agent LAG DeletePort.  Set to a non 0 value to remove a port from the LAG. Values correspond to ifIndex values in the ifTable.
.1.3.6.1.4.1.4526.1.8.1.2.2.2.1.9,GSM7224-SWITCHING-MIB::agentLagSummaryStatus,INTEGER,read-write,,current,active(1):notInService(2):notReady(3):createAndGo(4):createAndWait(5):destroy(6),Agent LAG Status.  active(1) - This LAG is enabled. destroy(6) - Set to this value to remove the LAG.
.1.3.6.1.4.1.4526.1.8.1.2.2.2.1.10,GSM7224-SWITCHING-MIB::agentLagSummaryType,INTEGER,read-only,,current,static(1):dynamic(2),Agent LAG Type.  static(1) - This LAG is staticly maintained. dynamic(2) - This LAG is dynamicly maintained.
.1.3.6.1.4.1.4526.1.8.1.2.2.3,GSM7224-SWITCHING-MIB::agentLagDetailedConfigTable,,not-accessible,,current,,A detailed table of the switch's LAG config entries
.1.3.6.1.4.1.4526.1.8.1.2.2.3.1,GSM7224-SWITCHING-MIB::agentLagDetailedConfigEntry,,not-accessible,agentLagDetailedLagIndex:agentLagDetailedIfIndex,current,,Switch's LAG config entry
.1.3.6.1.4.1.4526.1.8.1.2.2.3.1.1,GSM7224-SWITCHING-MIB::agentLagDetailedLagIndex,Integer32,read-only,,current,,LAG index
.1.3.6.1.4.1.4526.1.8.1.2.2.3.1.2,GSM7224-SWITCHING-MIB::agentLagDetailedIfIndex,Integer32,read-only,,current,,LAG port index
.1.3.6.1.4.1.4526.1.8.1.2.2.3.1.3,GSM7224-SWITCHING-MIB::agentLagDetailedPortSpeed,OBJECT,read-only,,current,,LAG port speed. See agentPortType for a description and list of valid values.
.1.3.6.1.4.1.4526.1.8.1.2.2.3.1.4,GSM7224-SWITCHING-MIB::agentLagDetailedPortStatus,INTEGER,read-only,,current,active(1):inactive(2),LAG port status.  active(1) - Actively participating in the LAG. inactive(2) - Not participating in the LAG.
.1.3.6.1.4.1.4526.1.8.1.2.2.4,GSM7224-SWITCHING-MIB::agentLagConfigStaticCapability,INTEGER,read-write,,current,enable(1):disable(2),Agent LAG Static Capability. Configures whether Static LAGs are supported on this device.
.1.3.6.1.4.1.4526.1.8.1.2.3,GSM7224-SWITCHING-MIB::agentNetworkConfigGroup,,,,,,
.1.3.6.1.4.1.4526.1.8.1.2.3.1,GSM7224-SWITCHING-MIB::agentNetworkIPAddress,IpAddress,read-write,,current,,The switch's network ip address
.1.3.6.1.4.1.4526.1.8.1.2.3.2,GSM7224-SWITCHING-MIB::agentNetworkSubnetMask,IpAddress,read-write,,current,,The switch's network subnet mask
.1.3.6.1.4.1.4526.1.8.1.2.3.3,GSM7224-SWITCHING-MIB::agentNetworkDefaultGateway,IpAddress,read-write,,current,,The switch's network default gateway
.1.3.6.1.4.1.4526.1.8.1.2.3.4,GSM7224-SWITCHING-MIB::agentNetworkBurnedInMacAddress,OCTET,read-only,,current,,The switch's network Burned-In MAC address
.1.3.6.1.4.1.4526.1.8.1.2.3.5,GSM7224-SWITCHING-MIB::agentNetworkConfigProtocol,INTEGER,read-write,,current,none(1):bootp(2):dhcp(3),The switch's network config protocol
.1.3.6.1.4.1.4526.1.8.1.2.3.6,GSM7224-SWITCHING-MIB::agentNetworkWebMode,INTEGER,read-write,,current,enable(1):disable(2),The switch's network config protocol on next bootup
.1.3.6.1.4.1.4526.1.8.1.2.3.7,GSM7224-SWITCHING-MIB::agentNetworkJavaMode,INTEGER,read-write,,current,enable(1):disable(2),Configures the use of the Java interface through the Web.
.1.3.6.1.4.1.4526.1.8.1.2.3.8,GSM7224-SWITCHING-MIB::agentNetworkMgmtVlan,Integer32,read-write,,current,,The VLAN ID through which the switch can be managed using the  agentNetworkIPAddress
.1.3.6.1.4.1.4526.1.8.1.2.4,GSM7224-SWITCHING-MIB::agentServicePortConfigGroup,,,,,,
.1.3.6.1.4.1.4526.1.8.1.2.4.1,GSM7224-SWITCHING-MIB::agentServicePortIPAddress,IpAddress,read-write,,current,,The switch's ServicePort ip address
.1.3.6.1.4.1.4526.1.8.1.2.4.2,GSM7224-SWITCHING-MIB::agentServicePortSubnetMask,IpAddress,read-write,,current,,The switch's ServicePort subnet mask
.1.3.6.1.4.1.4526.1.8.1.2.4.3,GSM7224-SWITCHING-MIB::agentServicePortDefaultGateway,IpAddress,read-write,,current,,The switch's ServicePort default gateway
.1.3.6.1.4.1.4526.1.8.1.2.4.4,GSM7224-SWITCHING-MIB::agentServicePortBurnedInMacAddress,OCTET,read-only,,current,,The switch's ServicePort Burned-In MAC address
.1.3.6.1.4.1.4526.1.8.1.2.4.5,GSM7224-SWITCHING-MIB::agentServicePortConfigProtocol,INTEGER,read-write,,current,none(1):bootp(2):dhcp(3),The switch's ServicePort config protocol
.1.3.6.1.4.1.4526.1.8.1.2.6,GSM7224-SWITCHING-MIB::agentSnmpConfigGroup,,,,,,
.1.3.6.1.4.1.4526.1.8.1.2.6.1,GSM7224-SWITCHING-MIB::agentSnmpCommunityCreate,OCTET,read-write,,current,,Creates a new SNMP Community entry. Defaults: IPAddress 0.0.0.0 IpMask 0.0.0.0 AccessMode read-only Status config
.1.3.6.1.4.1.4526.1.8.1.2.6.2,GSM7224-SWITCHING-MIB::agentSnmpCommunityConfigTable,,not-accessible,,current,,A table of the switch's SNMP Config entries
.1.3.6.1.4.1.4526.1.8.1.2.6.2.1,GSM7224-SWITCHING-MIB::agentSnmpCommunityConfigEntry,,not-accessible,agentSnmpCommunityIndex,current,,Switch's SNMP Config entry
.1.3.6.1.4.1.4526.1.8.1.2.6.2.1.1,GSM7224-SWITCHING-MIB::agentSnmpCommunityIndex,Integer32,read-only,,current,,The switch's Snmp Community Index
.1.3.6.1.4.1.4526.1.8.1.2.6.2.1.2,GSM7224-SWITCHING-MIB::agentSnmpCommunityName,OCTET,read-write,,current,,The switch's Snmp Community Name This name identifies each SNMP community;  the name can be up to 16 characters, and it is case-sensitive. Community names in the SNMP community must be unique.  If you make multiple entries using the same community name,  the first entry is kept and processed and all duplicate entries are ignored.  
.1.3.6.1.4.1.4526.1.8.1.2.6.2.1.3,GSM7224-SWITCHING-MIB::agentSnmpCommunityIPAddress,IpAddress,read-write,,current,,The switch's Snmp Community IP Address Client IP Address - This attribute is an IP address (or portion thereof)  from which this device will accept SNMP packets with the associated  community. The requesting entity's IP address is logical-ANDed with  the Client IP Mask and the result must match the Client IP Address.  Note: If the Client IP Mask is set  to 0.0.0.0, a Client IP Address of 0.0.0.0 matches all IP addresses.  
.1.3.6.1.4.1.4526.1.8.1.2.6.2.1.4,GSM7224-SWITCHING-MIB::agentSnmpCommunityIPMask,IpAddress,read-write,,current,,The switch's Snmp Community IP Mask Client IP Mask - This attribute is a mask to be logical-ANDed with the requesting entity's IP address before comparison with the Client IP Address.  If the result matches with Client IP Address then the address is an  authenticated IP address. For example, if the Client IP Address  is 9.47.128.0 and the corresponding Client IP Mask is 255.255.255.0,  a range of incoming IP addresses would match, that is, the incoming IP  addresses could be a value in the following range: 9.47.128.0 to 9.47.128.255. To have a specific IP address be the only authenticated IP address, set the  Client IP Address to the required IP address and set the Client IP Mask  to 255.255.255.255.  
.1.3.6.1.4.1.4526.1.8.1.2.6.2.1.5,GSM7224-SWITCHING-MIB::agentSnmpCommunityAccessMode,INTEGER,read-write,,current,,The switch's Snmp Community Access Mode Access Mode - This value can be read-only or read/write.  A community with a read-only access allows for switch information to be displayed. A community with a read/write access allows for configuration  changes to be made and for information to be displayed. 
.1.3.6.1.4.1.4526.1.8.1.2.6.2.1.6,GSM7224-SWITCHING-MIB::agentSnmpCommunityStatus,INTEGER,read-write,,current,active(1):notInService(2):config(3):destroy(4),The switch's Snmp Community Status.  active(1) - This community is active, allowing SNMP managers associated  with this community to manage the switch according to its  access right.   notInService(2) - This community is not active; no SNMP requests using this  community will be accepted. In this case the SNMP manager  associated with this community cannot manage the switch until  the Status is changed back to active(1).  config(3) - The community Status must be set to this value in order to  configure it. When creating a new community entry, initial  Status will be set to this value.  destroy(4) - Set to this value to remove the community from the agent.
.1.3.6.1.4.1.4526.1.8.1.2.6.3,GSM7224-SWITCHING-MIB::agentSnmpTrapReceiverCreate,OCTET,read-write,,current,,Creates a new trap receiver entry.  Defaults: IPAddress 0.0.0.0 status config
.1.3.6.1.4.1.4526.1.8.1.2.6.4,GSM7224-SWITCHING-MIB::agentSnmpTrapReceiverConfigTable,,not-accessible,,current,,Trap messages are sent across a network to an SNMP Network Manager.  These messages alert the manager to events occurring within the switch  or on the network. Up to six simultaneous trap receivers are supported.  
.1.3.6.1.4.1.4526.1.8.1.2.6.4.1,GSM7224-SWITCHING-MIB::agentSnmpTrapReceiverConfigEntry,,not-accessible,agentSnmpTrapReceiverIndex,current,,Switch's Snmp Trace Receiver Config entry
.1.3.6.1.4.1.4526.1.8.1.2.6.4.1.1,GSM7224-SWITCHING-MIB::agentSnmpTrapReceiverIndex,Integer32,read-only,,current,,The switch's Snmp Trap Receiver Index
.1.3.6.1.4.1.4526.1.8.1.2.6.4.1.2,GSM7224-SWITCHING-MIB::agentSnmpTrapReceiverCommunityName,OCTET,read-write,,current,,The switch's Snmp Trap Receiver Community Name. This is the SNMP community name of the remote network manager;  the name can be up to 16 characters, and is case-sensitive.  
.1.3.6.1.4.1.4526.1.8.1.2.6.4.1.3,GSM7224-SWITCHING-MIB::agentSnmpTrapReceiverIPAddress,IpAddress,read-write,,current,,IP Address - Each IP address parameter is four integer numbers.  The numbers range from 0 to 255.  
.1.3.6.1.4.1.4526.1.8.1.2.6.4.1.4,GSM7224-SWITCHING-MIB::agentSnmpTrapReceiverStatus,INTEGER,read-write,,current,active(1):notInService(2):config(3):destroy(4),The switch's Snmp Trap Reciever Status. active(1) - This trap receiver is active, allowing SNMP Traps to  be sent to this receiver.   notInService(2) - This trap reciever is not active; no SNMP Traps will  be sent to this reciever until it's set back to active(1).   config(3) - The trap reciever Status must be set to this value in order  to configure it. When creating a new trap receiver entry,  the Status will initially be set to this value. Note: agentSnmpTrapReceiverIPAddress must be set to non-zero before changing to active(1) or notInService(2).  destroy(4) - Set to this value to remove the trap receiver entry from  the agent.
.1.3.6.1.4.1.4526.1.8.1.2.6.5,GSM7224-SWITCHING-MIB::agentSnmpTrapFlagsConfigGroup,,,,,,
.1.3.6.1.4.1.4526.1.8.1.2.6.5.1,GSM7224-SWITCHING-MIB::agentSnmpAuthenticationTrapFlag,INTEGER,read-write,,current,enable(1):disable(2),Authentication Flag - Enable/Disable authentication Flag.
.1.3.6.1.4.1.4526.1.8.1.2.6.5.2,GSM7224-SWITCHING-MIB::agentSnmpLinkUpDownTrapFlag,INTEGER,read-write,,current,enable(1):disable(2),Link Up/Down Flag - Enable/Disable Link Up/Link Down traps for the  entire switch. When set to Enable, the Link Up/Down traps will be  sent only if the Link Trap flag setting associated with the port  (Port Configuration Menu) is set to Enable. 
.1.3.6.1.4.1.4526.1.8.1.2.6.5.3,GSM7224-SWITCHING-MIB::agentSnmpMultipleUsersTrapFlag,INTEGER,read-write,,current,enable(1):disable(2),Multiple Users Flag - Enable/Disable Multiple User traps. When the value is set to Enable, a Multiple User Trap is sent whenever someone logs in  to the terminal interface (EIA 232 or Telnet) and there is already an  existing terminal interface session. 
.1.3.6.1.4.1.4526.1.8.1.2.6.5.4,GSM7224-SWITCHING-MIB::agentSnmpSpanningTreeTrapFlag,INTEGER,read-write,,current,enable(1):disable(2),Spanning Tree Flag - This flag enables the sending of new root traps and  topology change notification traps.
.1.3.6.1.4.1.4526.1.8.1.2.6.5.5,GSM7224-SWITCHING-MIB::agentSnmpBroadcastStormTrapFlag,INTEGER,read-write,,current,enable(1):disable(2),Broadcast Storm Flag - This flag enables or disables the broadcast  storm trap. You must also enable Broadcast Storm Recovery Mode  (see the Switch Configuration Menu). When this  value is set to Enable and Broadcast Storm Recovery mode is set to Enable,  the Broadcast Storm Start/End traps are sent when the switch enters and  leaves Broadcast Storm Recovery. 
.1.3.6.1.4.1.4526.1.8.1.2.7,GSM7224-SWITCHING-MIB::agentSpanningTreeConfigGroup,,,,,,
.1.3.6.1.4.1.4526.1.8.1.2.7.1,GSM7224-SWITCHING-MIB::agentSpanningTreeMode,INTEGER,read-write,,current,enable(1):disable(2),The switch's Spanning Tree Switch Status
.1.3.6.1.4.1.4526.1.8.1.2.8,GSM7224-SWITCHING-MIB::agentSwitchConfigGroup,,,,,,
.1.3.6.1.4.1.4526.1.8.1.2.8.2,GSM7224-SWITCHING-MIB::agentSwitchBroadcastControlMode,INTEGER,read-write,,current,enable(1):disable(2),The switch config broadcast allows you to enable or disable  broadcast storm recovery mode. When you specify Enable for Broadcast  Storm Recovery and the broadcast traffic on any Ethernet port exceeds  20 percent of the link speed, the switch blocks (discards) the broadcast  traffic until the broadcast traffic returns to 10 percent or less. Upper limit for 10M link is 20% and lower limit is 10%.  For 100M link Upper limit is 5% and lower limit is 2%
.1.3.6.1.4.1.4526.1.8.1.2.8.3,GSM7224-SWITCHING-MIB::agentSwitchDot3FlowControlMode,INTEGER,read-write,,current,enable(1):disable(2),Config switchconfig flowcontrol allows you to enable or disable  802.3x flow control for the switch. This value  applies to only full-duplex mode ports. 
.1.3.6.1.4.1.4526.1.8.1.2.8.4,GSM7224-SWITCHING-MIB::agentSwitchAddressAgingTimeoutTable,,not-accessible,,current,,The switch's address aging timeout table
.1.3.6.1.4.1.4526.1.8.1.2.8.4.1,GSM7224-SWITCHING-MIB::agentSwitchAddressAgingTimeoutEntry,,not-accessible,dot1qFdbId,current,,Aging information about a specific Filtering Database.
.1.3.6.1.4.1.4526.1.8.1.2.8.4.1.1,GSM7224-SWITCHING-MIB::agentSwitchAddressAgingTimeout,Integer32,read-write,,current,,The FDB entry's address aging timeout (in seconds)
.1.3.6.1.4.1.4526.1.8.1.2.8.6,GSM7224-SWITCHING-MIB::agentSwitchIGMPSnoopingGroup,,,,,,
.1.3.6.1.4.1.4526.1.8.1.2.8.6.1,GSM7224-SWITCHING-MIB::agentSwitchIGMPSnoopingAdminMode,INTEGER,read-write,,current,enable(1):disable(2),This enables or disables IGMP Snooping on the system. 
.1.3.6.1.4.1.4526.1.8.1.2.8.6.2,GSM7224-SWITCHING-MIB::agentSwitchIGMPSnoopingGroupMembershipInterval,Integer32,read-write,,current,,The amount of time in seconds a switch will wait for a report for a particular group on a particular interface before it deletes the interface from the entry. 
.1.3.6.1.4.1.4526.1.8.1.2.8.6.3,GSM7224-SWITCHING-MIB::agentSwitchIGMPSnoopingMaxResponseTime,Integer32,read-write,,current,,The amount of time in seconds a switch will wait after sending  a query on an interface because it did not receive a report for  a particular group in that interface. This value must be less  than agentSwitchIGMPSnoopingQueryInterval.
.1.3.6.1.4.1.4526.1.8.1.2.8.6.4,GSM7224-SWITCHING-MIB::agentSwitchIGMPSnoopingMRPExpirationTime,Integer32,read-write,,current,,Multicast Router Present Expiration Time. The amount of time in seconds a switch will wait for a query to be received on an interface before the interface is removed from the list of interfaces with mutlticast routers attached. A value of zero indicates an infinite timeout, i.e. the entries in the list will not expire.
.1.3.6.1.4.1.4526.1.8.1.2.8.6.5,GSM7224-SWITCHING-MIB::agentSwitchIGMPSnoopingPortMask,OCTET,read-write,,current,,IGMP Snooping Port Mask.  This allows configuration of IGMP Snooping on selected ports.  IGMP Snooping cannot be enabled on an interface that has routing enabled, or is a member of a LAG. If a port which has IGMP Snooping  enabled becomes enabled for routing, or is enlisted as a member of a  LAG, IGMP Snooping functionality will be disabled on that port. IGMP Snooping functionality will be subsequently be reenabled if routing is disabled or LAG membership is removed from an interface that had previously had IGMP Snooping enabled.  To obtain port numbers from interface numbers, use the objects agentPortDot1dBasePort and agentPortIfIndex in the agentPortConfigTable  table.
.1.3.6.1.4.1.4526.1.8.1.2.8.6.6,GSM7224-SWITCHING-MIB::agentSwitchIGMPSnoopingMulticastControlFramesProcessed,Counter32,read-only,,current,,Multicast Control Frames Processed by CPU. The number of multicast control frames that have been processed by the CPU.
.1.3.6.1.4.1.4526.1.8.1.2.8.7,GSM7224-SWITCHING-MIB::agentSwitchMFDBGroup,,,,,,
.1.3.6.1.4.1.4526.1.8.1.2.8.7.1,GSM7224-SWITCHING-MIB::agentSwitchMFDBTable,,not-accessible,,current,,The Multicast Forwarding Database table
.1.3.6.1.4.1.4526.1.8.1.2.8.7.1.1,GSM7224-SWITCHING-MIB::agentSwitchMFDBEntry,,not-accessible,agentSwitchMFDBVlanId:agentSwitchMFDBMacAddress:agentSwitchMFDBProtocolType,current,,Contains Forwarding and Filtering information per Vlan Index, MAC Address, and  Component User.
.1.3.6.1.4.1.4526.1.8.1.2.8.7.1.1.1,GSM7224-SWITCHING-MIB::agentSwitchMFDBVlanId,Unsigned32,read-only,,current,,Vlan Index for which this entry is associated with.
.1.3.6.1.4.1.4526.1.8.1.2.8.7.1.1.2,GSM7224-SWITCHING-MIB::agentSwitchMFDBMacAddress,OCTET,read-only,,current,,A multicast MAC address for which the switch has forwarding and or  filtering information.
.1.3.6.1.4.1.4526.1.8.1.2.8.7.1.1.3,GSM7224-SWITCHING-MIB::agentSwitchMFDBProtocolType,INTEGER,read-only,,current,static(1):gmrp(2):igmp(3),The component that is responsible for this entry in the Multicast  Forwarding Database.
.1.3.6.1.4.1.4526.1.8.1.2.8.7.1.1.4,GSM7224-SWITCHING-MIB::agentSwitchMFDBType,INTEGER,read-only,,current,static(1):dynamic(2),This displays the type of the entry.   static(1) - Entries configured by the end user dynamic(2) - Entries added as a result of a learning process or protocol
.1.3.6.1.4.1.4526.1.8.1.2.8.7.1.1.5,GSM7224-SWITCHING-MIB::agentSwitchMFDBDescription,OCTET,read-only,,current,,Text description of this multicast table entry.
.1.3.6.1.4.1.4526.1.8.1.2.8.7.1.1.6,GSM7224-SWITCHING-MIB::agentSwitchMFDBForwardingPortMask,OCTET,read-only,,current,,BitMask indicating which ports this entry indicates should be forwarded.  To obtain port numbers from interface numbers, use the objects agentPortDot1dBasePort and agentPortIfIndex in the agentPortConfigTable  table.
.1.3.6.1.4.1.4526.1.8.1.2.8.7.1.1.7,GSM7224-SWITCHING-MIB::agentSwitchMFDBFilteringPortMask,OCTET,read-only,,current,,BitMask indicating which ports this entry indicates should be filtered.  To obtain port numbers from interface numbers, use the objects agentPortDot1dBasePort and agentPortIfIndex in the agentPortConfigTable  table.
.1.3.6.1.4.1.4526.1.8.1.2.8.7.2,GSM7224-SWITCHING-MIB::agentSwitchMFDBSummaryTable,,not-accessible,,current,,The Multicast Forwarding Database Summary table
.1.3.6.1.4.1.4526.1.8.1.2.8.7.2.1,GSM7224-SWITCHING-MIB::agentSwitchMFDBSummaryEntry,,not-accessible,agentSwitchMFDBSummaryVlanId:agentSwitchMFDBSummaryMacAddress,current,,Summarizes the forwarding ports for all components registered for all MFDB table entries with the same Vlan Index and MAC Address.
.1.3.6.1.4.1.4526.1.8.1.2.8.7.2.1.1,GSM7224-SWITCHING-MIB::agentSwitchMFDBSummaryVlanId,Unsigned32,read-only,,current,,Vlan Index for which this entry is associated with.
.1.3.6.1.4.1.4526.1.8.1.2.8.7.2.1.2,GSM7224-SWITCHING-MIB::agentSwitchMFDBSummaryMacAddress,OCTET,read-only,,current,,A multicast MAC address for which the switch has forwarding and or  filtering information.
.1.3.6.1.4.1.4526.1.8.1.2.8.7.2.1.3,GSM7224-SWITCHING-MIB::agentSwitchMFDBSummaryForwardingPortMask,OCTET,read-only,,current,,Port Mask indicating which ports this entry indicates should be forwarded.  To obtain port numbers from interface numbers, use the objects agentPortDot1dBasePort and agentPortIfIndex in the agentPortConfigTable  table.
.1.3.6.1.4.1.4526.1.8.1.2.8.7.3,GSM7224-SWITCHING-MIB::agentSwitchMFDBMaxTableEntries,Gauge32,read-only,,current,,This displays the maximum number of entries that can possibly be in  the Multicast Forwarding Database table.
.1.3.6.1.4.1.4526.1.8.1.2.8.7.4,GSM7224-SWITCHING-MIB::agentSwitchMFDBMostEntriesUsed,Gauge32,read-only,,current,,This displays the largest number of entries that have been present  in the Multicast Forwarding Database table. This value is also known  as the MFDB high-water mark.
.1.3.6.1.4.1.4526.1.8.1.2.8.7.5,GSM7224-SWITCHING-MIB::agentSwitchMFDBCurrentEntries,Gauge32,read-only,,current,,This displays the current number of entries in the Multicast  Forwarding Database table.
.1.3.6.1.4.1.4526.1.8.1.2.9,GSM7224-SWITCHING-MIB::agentTransferConfigGroup,,,,,,
.1.3.6.1.4.1.4526.1.8.1.2.9.1,GSM7224-SWITCHING-MIB::agentTransferUploadGroup,,,,,,
.1.3.6.1.4.1.4526.1.8.1.2.9.1.1,GSM7224-SWITCHING-MIB::agentTransferUploadMode,INTEGER,read-write,,current,tftp(1):xmodem(2):ymodem(3):zmodem(4),Transfer upload mode configures the mode to use when uploading from the  switch. The mode is either X/Y/ZMODEM or TFTP. X/Y/ZMODEM is valid only when the  file transfer is initiated by the serial EIA 232 port.  
.1.3.6.1.4.1.4526.1.8.1.2.9.1.2,GSM7224-SWITCHING-MIB::agentTransferUploadServerIP,IpAddress,read-write,,current,,Transfer upload tftpserverip configures the IP address of the server  where the file is located. It is valid only when the Transfer Mode is  TFTP. The address is 4 integer bytes ranging from 0 to 255.
.1.3.6.1.4.1.4526.1.8.1.2.9.1.3,GSM7224-SWITCHING-MIB::agentTransferUploadPath,OCTET,read-write,,current,,Transfer upload tftppath configures the directory path where the file is to be uploaded to. The switch remembers the last file path used.  
.1.3.6.1.4.1.4526.1.8.1.2.9.1.4,GSM7224-SWITCHING-MIB::agentTransferUploadFilename,OCTET,read-write,,current,,Transfer upload tftpfilename configures the file name for the file being  uploaded from the switch. It can be up to 32 alphanumeric characters.  The switch remembers the last file name used.  File path can be appended to the file name if the string is less than 17  characters. Otherwise, the File Path field will need to be used and the  File Name will be appended to the File Path as is. An example would be  File Path set to c:\tftp\code\ and File Name set to e1r1v1.opr.  Note: File Name, File Path, and TFTP Server IP Address are applicable  only if the Transfer Mode is TFTP.
.1.3.6.1.4.1.4526.1.8.1.2.9.1.5,GSM7224-SWITCHING-MIB::agentTransferUploadDataType,INTEGER,read-write,,current,config(2):errorlog(3):messagelog(4):traplog(5),Transfer upload datatype configures the type of file to upload from the  switch.  The types for upload are: - Configuration File - Error log - Message log - Trap log 
.1.3.6.1.4.1.4526.1.8.1.2.9.1.6,GSM7224-SWITCHING-MIB::agentTransferUploadStart,INTEGER,read-write,,current,enable(1):disable(2),Transfer upload start will start an upload transfer.  The agentTransferUploadMode object must not be set to xmodem(2),
.1.3.6.1.4.1.4526.1.8.1.2.9.1.7,GSM7224-SWITCHING-MIB::agentTransferUploadStatus,INTEGER,read-only,,current,notInitiated(1):transferStarting(2):errorStarting(3):wrongFileType(4):updatingConfig(5):invalidConfigFile(6):writingToFlash(7):failureWritingToFlash(8):checkingCRC(9):failedCRC(10):unknownDirection(11):transferSuccessful(12):transferFailed(13),Indicates the current status of an upload transfer.
.1.3.6.1.4.1.4526.1.8.1.2.9.2,GSM7224-SWITCHING-MIB::agentTransferDownloadGroup,,,,,,
.1.3.6.1.4.1.4526.1.8.1.2.9.2.1,GSM7224-SWITCHING-MIB::agentTransferDownloadMode,INTEGER,read-write,,current,tftp(1):xmodem(2):ymodem(3):zmodem(4),Transfer download mode configures the mode to use when downloading  to the switch. The mode is either X/Y/ZMODEM or TFTP. X/Y/ZMODEM is valid only  when the file transfer is initiated by the serial EIA 232 port.  
.1.3.6.1.4.1.4526.1.8.1.2.9.2.2,GSM7224-SWITCHING-MIB::agentTransferDownloadServerIP,IpAddress,read-write,,current,,Transfer download tftpserverip configures the IP address of the server  where the file is located. It is valid only when the Transfer Mode is TFTP.  The address is 4 integer bytes ranging from 0 to 255.  
.1.3.6.1.4.1.4526.1.8.1.2.9.2.3,GSM7224-SWITCHING-MIB::agentTransferDownloadPath,OCTET,read-write,,current,,Transfer download tftppath configures the directory path where the  file is located. The switch remembers the last file path used.  
.1.3.6.1.4.1.4526.1.8.1.2.9.2.4,GSM7224-SWITCHING-MIB::agentTransferDownloadFilename,OCTET,read-write,,current,,Transfer download tftpfilename configures the file name for the file  being downloaded to the switch. It can be up to 32 alphanumeric characters.  The switch remembers the last file name used.  File path can be appended to the file name if the string is less than 33  characters. Otherwise, the File Path field will need to be used and the  File Name will be appended to the File Path as is. An example would be  File Path set to c:\tftp\code\ and File Name set to e1r1v1.opr.  Note: File Name, File Path, and TFTP Server IP Address are applicable  only if the Transfer Mode is TFTP.
.1.3.6.1.4.1.4526.1.8.1.2.9.2.5,GSM7224-SWITCHING-MIB::agentTransferDownloadDataType,INTEGER,read-write,,current,code(2):config(3):sshkey-rsa1(4):sshkey-rsa2(5):sshkey-dsa(6):sslpem-root(7):sslpem-server(8):sslpem-dhweak(9):sslpem-dhstrong(10),Transfer download datatype configures the type of file to download to  the switch.  The types for download are:  code - Code File config - Configuration File sshkey-rsa1 - SSH-1 RSA Key File sshkey-rsa2 - SSH-2 RSA Key PEM File sshkey-dsa - SSH-2 DSA Key PEM File sslpem-root - SSL Trusted Root Certificate PEM File sslpem-server - SSL Server Certificate PEM File sslpem-dhweak - SSL DH Weak Encryption Parameter PEM File sslpem-dhstrong - SSL DH Strong Encryption Parameter PEM File  Note: SSH Key files can only be downloaded if SSH Server is administratively  disabled, and there are no active SSH sessions. 
.1.3.6.1.4.1.4526.1.8.1.2.9.2.6,GSM7224-SWITCHING-MIB::agentTransferDownloadStart,INTEGER,read-write,,current,enable(1):disable(2),Transfer download start will start an download transfer.  The agentTransferDownloadMode object must not be set to xmodem(2),
.1.3.6.1.4.1.4526.1.8.1.2.9.2.7,GSM7224-SWITCHING-MIB::agentTransferDownloadStatus,INTEGER,read-only,,current,notInitiated(1):transferStarting(2):errorStarting(3):wrongFileType(4):updatingConfig(5):invalidConfigFile(6):writingToFlash(7):failureWritingToFlash(8):checkingCRC(9):failedCRC(10):unknownDirection(11):transferSuccessful(12):transferFailed(13),Indicates the current status of an download transfer.
.1.3.6.1.4.1.4526.1.8.1.2.10,GSM7224-SWITCHING-MIB::agentPortMirroringGroup,,,,,,
.1.3.6.1.4.1.4526.1.8.1.2.10.1,GSM7224-SWITCHING-MIB::agentMirroredPortIfIndex,Integer32,read-write,,current,,IfIndex of the mirrored port
.1.3.6.1.4.1.4526.1.8.1.2.10.2,GSM7224-SWITCHING-MIB::agentProbePortIfIndex,Integer32,read-write,,current,,IfIndex of the probe port
.1.3.6.1.4.1.4526.1.8.1.2.10.3,GSM7224-SWITCHING-MIB::agentPortMirroringMode,INTEGER,read-write,,current,enable(1):disable(2):delete(3),Port mirroring mode:  enable - enable mirroring mode disable - disable mirroring mode delete - clear MirroredPort and Probe Port configuration
.1.3.6.1.4.1.4526.1.8.1.2.12,GSM7224-SWITCHING-MIB::agentDot3adAggPortTable,,not-accessible,,current,,This table provides 802.3ad link aggregation information for each physical port that is not available through the standard MIB.
.1.3.6.1.4.1.4526.1.8.1.2.12.1,GSM7224-SWITCHING-MIB::agentDot3adAggPortEntry,,not-accessible,agentDot3adAggPort,current,,Information about a table entry. The agentDot3adAggPort identifies the external interface number of the port.
.1.3.6.1.4.1.4526.1.8.1.2.12.1.1,GSM7224-SWITCHING-MIB::agentDot3adAggPort,Integer32,read-only,,current,,ifIndex of this physical port
.1.3.6.1.4.1.4526.1.8.1.2.12.1.2,GSM7224-SWITCHING-MIB::agentDot3adAggPortLACPMode,INTEGER,read-write,,current,enable(1):disable(2),Enable/disable 802.3ad LACP on this port
.1.3.6.1.4.1.4526.1.8.1.2.13,GSM7224-SWITCHING-MIB::agentPortConfigTable,,not-accessible,,current,,A table of the switch's physical port config entries
.1.3.6.1.4.1.4526.1.8.1.2.13.1,GSM7224-SWITCHING-MIB::agentPortConfigEntry,,not-accessible,agentPortDot1dBasePort,current,,Switch's physical port config entry
.1.3.6.1.4.1.4526.1.8.1.2.13.1.1,GSM7224-SWITCHING-MIB::agentPortDot1dBasePort,Integer32,read-only,,current,,The port number of this port.
.1.3.6.1.4.1.4526.1.8.1.2.13.1.2,GSM7224-SWITCHING-MIB::agentPortIfIndex,Integer32,read-only,,current,,The switch's Port IfIndex
.1.3.6.1.4.1.4526.1.8.1.2.13.1.3,GSM7224-SWITCHING-MIB::agentPortIanaType,INTEGER,read-only,,current,other(1):regular1822(2):hdh1822(3):ddnX25(4):rfc877x25(5):ethernetCsmacd(6):iso88023Csmacd(7):iso88024TokenBus(8):iso88025TokenRing(9):iso88026Man(10):starLan(11):proteon10Mbit(12):proteon80Mbit(13):hyperchannel(14):fddi(15):lapb(16):sdlc(17):ds1(18):e1(19):basicISDN(20):primaryISDN(21):propPointToPointSerial(22):ppp(23):softwareLoopback(24):eon(25):ethernet3Mbit(26):nsip(27):slip(28):ultra(29):ds3(30):sip(31):frameRelay(32):rs232(33):para(34):arcnet(35):arcnetPlus(36):atm(37):miox25(38):sonet(39):x25ple(40):iso88022llc(41):localTalk(42):smdsDxi(43):frameRelayService(44):v35(45):hssi(46):hippi(47):modem(48):aal5(49):sonetPath(50):sonetVT(51):smdsIcip(52):propVirtual(53):propMultiplexor(54):ieee80212(55):fibreChannel(56):hippiInterface(57):frameRelayInterconnect(58):aflane8023(59):aflane8025(60):cctEmul(61):fastEther(62):isdn(63):v11(64):v36(65):g703at64k(66):g703at2mb(67):qllc(68):fastEtherFX(69):channel(70):ieee80211(71):ibm370parChan(72):escon(73):dlsw(74):isdns(75):isdnu(76):lapd(77):ipSwitch(78):rsrb(79):atmLogical(80):ds0(81):ds0Bundle(82):bsc(83):async(84):cnr(85):iso88025Dtr(86):eplrs(87):arap(88):propCnls(89):hostPad(90):termPad(91):frameRelayMPI(92):x213(93):adsl(94):radsl(95):sdsl(96):vdsl(97):iso88025CRFPInt(98):myrinet(99):voiceEM(100):voiceFXO(101):voiceFXS(102):voiceEncap(103):voiceOverIp(104):atmDxi(105):atmFuni(106):atmIma(107):pppMultilinkBundle(108):ipOverCdlc(109):ipOverClaw(110):stackToStack(111):virtualIpAddress(112):mpc(113):ipOverAtm(114):iso88025Fiber(115):tdlc(116):gigabitEthernet(117):hdlc(118):lapf(119):v37(120):x25mlp(121):x25huntGroup(122):transpHdlc(123):interleave(124):fast(125):ip(126):docsCableMaclayer(127):docsCableDownstream(128):docsCableUpstream(129):a12MppSwitch(130):tunnel(131):coffee(132):ces(133):atmSubInterface(134):l2vlan(135):l3ipvlan(136):l3ipxvlan(137):digitalPowerline(138):mediaMailOverIp(139):dtm(140):dcn(141):ipForward(142):msdsl(143):ieee1394(144):if-gsn(145):dvbRccMacLayer(146):dvbRccDownstream(147):dvbRccUpstream(148):atmVirtual(149):mplsTunnel(150):srp(151):voiceOverAtm(152):voiceOverFrameRelay(153):idsl(154):compositeLink(155):ss7SigLink(156):propWirelessP2P(157):frForward(158):rfc1483(159):usb(160):ieee8023adLag(161):bgppolicyaccounting(162):frf16MfrBundle(163):h323Gatekeeper(164):h323Proxy(165):mpls(166):mfSigLink(167):hdsl2(168):shdsl(169):ds1FDL(170):pos(171):dvbAsiIn(172):dvbAsiOut(173):plc(174):nfas(175):tr008(176):gr303RDT(177):gr303IDT(178):isup(179):propDocsWirelessMaclayer(180):propDocsWirelessDownstream(181):propDocsWirelessUpstream(182):hiperlan2(183):propBWAp2Mp(184):sonetOverheadChannel(185):digitalWrapperOverheadChannel(186):aal2(187):radioMAC(188):atmRadio(189):imt(190):mvl(191):reachDSL(192):frDlciEndPt(193):atmVciEndPt(194):opticalChannel(195):opticalTransport(196):propAtm(197):voiceOverCable(198):infiniband(199):teLink(200):q2931(201):virtualTg(202):sipTg(203):sipSig(204):docsCableUpstreamChannel(205):econet(206):pon155(207):pon622(208):bridge(209):linegroup(210):voiceEMFGD(211):voiceFGDEANA(212):voiceDID(213):mpegTransport(214):sixToFour(215):gtp(216):pdnEtherLoop1(217):pdnEtherLoop2(218):opticalChannelGroup(219):homepna(220):gfp(221):ciscoISLvlan(222):actelisMetaLOOP(223):fcipLink(224):rpr(225):qam(226):lmp(227):cblVectaStar(228):docsCableMCmtsDownstream(229):adsl2(230):macSecControlledIF(231):macSecUncontrolledIF(232):aviciOpticalEther(233):atmbond(234):voiceFGDOS(235):mocaVersion1(236):ieee80216WMAN(237):adsl2plus(238):dvbRcsMacLayer(239):dvbTdm(240):dvbRcsTdma(241):x86Laps(242):wwanPP(243):wwanPP2(244):voiceEBS(245):ifPwType(246):ilan(247):pip(248):aluELP(249):gpon(250):vdsl2(251):capwapDot11Profile(252):capwapDot11Bss(253):capwapWtpVirtualRadio(254):bits(255):docsCableUpstreamRfPort(256):cableDownstreamRfPort(257):vmwareVirtualNic(258):ieee802154(259):otnOdu(260):otnOtu(261):ifVfiType(262):g9981(263):g9982(264):g9983(265):aluEpon(266):aluEponOnu(267):aluEponPhysicalUni(268):aluEponLogicalLink(269):aluGponOnu(270):aluGponPhysicalUni(271):vmwareNicTeam(272):docsOfdmDownstream(277):docsOfdmaUpstream(278):gfast(279):sdci(280):xboxWireless(281):fastdsl(282):docsCableScte55d1FwdOob(283):docsCableScte55d1RetOob(284):docsCableScte55d2DsOob(285):docsCableScte55d2UsOob(286):docsCableNdf(287):docsCableNdr(288):ptm(289):ghn(290):otnOtsi(291):otnOtuc(292):otnOduc(293):otnOtsig(294):microwaveCarrierTermination(295):microwaveRadioLinkTerminal(296),The switch's Port Type
.1.3.6.1.4.1.4526.1.8.1.2.13.1.4,GSM7224-SWITCHING-MIB::agentPortSTPMode,INTEGER,read-write,,current,dot1d(1):fast(2):off(3),The switch's Port Spanning Tree Protocol Mode STP mode values are:   dot1d (the default)  fast, indicates you want to use the fast spanning tree mode off, indicates the STP mode is turned off for a particular port This object is only supported when the Dot1d Protocol is enabled.
.1.3.6.1.4.1.4526.1.8.1.2.13.1.5,GSM7224-SWITCHING-MIB::agentPortSTPState,INTEGER,read-only,,current,blocking(1):listening(2):learning(3):forwarding(4):disabled(5),The switch's Port Spanning Tree Protocol State. This object is only supported when the Dot1d Protocol is enabled.
.1.3.6.1.4.1.4526.1.8.1.2.13.1.6,GSM7224-SWITCHING-MIB::agentPortAdminMode,INTEGER,read-write,,current,enable(1):disable(2),The switch's Port Admin Mode
.1.3.6.1.4.1.4526.1.8.1.2.13.1.7,GSM7224-SWITCHING-MIB::agentPortPhysicalMode,INTEGER,read-write,,obsolete,auto-negotiate(1):half-10(2):full-10(3):half-100(4):full-100(5):half-100fx(6):full-100fx(7):full-1000sx(8),The switch's Port Speed Mode. This is the configured physical mode. This object is read-only for gigabit ports
.1.3.6.1.4.1.4526.1.8.1.2.13.1.8,GSM7224-SWITCHING-MIB::agentPortPhysicalStatus,INTEGER,read-only,,obsolete,auto-negotiate(1):half-10(2):full-10(3):half-100(4):full-100(5):half-100fx(6):full-100fx(7):full-1000sx(8),The switch's Port Physical Speed Status. This is the current actual speed.
.1.3.6.1.4.1.4526.1.8.1.2.13.1.9,GSM7224-SWITCHING-MIB::agentPortLinkTrapMode,INTEGER,read-write,,current,enable(1):disable(2),If enabled, link up and link down traps will be sent for this port.
.1.3.6.1.4.1.4526.1.8.1.2.13.1.10,GSM7224-SWITCHING-MIB::agentPortClearStats,INTEGER,read-write,,current,enable(1):disable(2),clear stats for this port only
.1.3.6.1.4.1.4526.1.8.1.2.13.1.11,GSM7224-SWITCHING-MIB::agentPortDefaultType,OBJECT,read-write,,current,,This object identifies the default administrative port type, to be used in conjunction with the operational port type denoted by agentPortType.  The set of possible values for this object is the same as the set defined for the agentPortType object. This object represents the administratively-configured type of the MAU. If auto-negotiation is not enabled or is not implemented for this MAU, the value of this object determines the operational type of the MAU. In this case, a set to this object will force the MAU into the specified operating mode. If auto-negotiation is implemented and enabled for this MAU, the operational type of the MAU is determined by auto-negotiation, and the value of this object denotes the type to which the MAU will automatically revert if/when auto-negotiation is later disabled.  The valid values for this object are:  dot3MauType10BaseTHD dot3MauType10BaseTFD dot3MauType100BaseTXHD dot3MauType100BaseTXFD dot3MauType100BaseFXFD dot3MauType1000BaseSXFD
.1.3.6.1.4.1.4526.1.8.1.2.13.1.12,GSM7224-SWITCHING-MIB::agentPortType,OBJECT,read-only,,current,,This object identifies the port type. An initial set of MAU types are defined in RFC 2668. The assignment of OBJECT IDENTIFIERs to new types of MAUs is managed by the IANA. If the MAU type is unknown, the object identifier unknownMauType OBJECT IDENTIFIER ::= { 0 0 } is returned. Note that unknownMauType is a syntactically valid object identifier, and any conformant implementation of ASN.1 and the BER must be able to generate and recognize this value. This object represents the operational type of the MAU, as determined by either (1) the result of the auto-negotiation function or (2) if auto-negotiation is not enabled or is not implemented for this MAU, by the value of the object agentPortDefaultType, or (3) for the GigE card a value determined by the GBIC connected to the card. In case (2), a set to the object agentPortDefaultType will force the MAU into the new operating mode.  The valid values for this object are:  dot3MauType10BaseTHD dot3MauType10BaseTFD dot3MauType100BaseTXHD dot3MauType100BaseTXFD dot3MauType100BaseFXFD dot3MauType1000BaseSXFD dot3MauType1000BaseTFD
.1.3.6.1.4.1.4526.1.8.1.2.13.1.13,GSM7224-SWITCHING-MIB::agentPortAutoNegAdminStatus,INTEGER,read-write,,current,enable(1):disable(2),This object identifies the administration status of auto negotiation for this port.
.1.3.6.1.4.1.4526.1.8.1.2.13.1.14,GSM7224-SWITCHING-MIB::agentPortDot3FlowControlMode,INTEGER,read-write,,current,enable(1):disable(2),Config flowcontrol allows you to enable or disable  802.3x flow control for this port. This value  applies to only full-duplex mode ports. 
.1.3.6.1.4.1.4526.1.8.1.2.13.1.15,GSM7224-SWITCHING-MIB::agentPortDVlanTagMode,INTEGER,read-write,,current,enable(1):disable(2),Controls the Double Vlan Tag mode on this port.
.1.3.6.1.4.1.4526.1.8.1.2.13.1.16,GSM7224-SWITCHING-MIB::agentPortDVlanTagEthertype,Integer32,read-write,,current,,Configures the Ethertype for the Double Vlan Tag for this port.  Commonly used are the Ethertypes for vman tags (34984, or 0x88A8)  and dot1q tags (33024, or 0x8100).
.1.3.6.1.4.1.4526.1.8.1.2.13.1.17,GSM7224-SWITCHING-MIB::agentPortDVlanTagCustomerId,Integer32,read-write,,current,,Configures the Customer ID for the Double Vlan Tag for this port.
.1.3.6.1.4.1.4526.1.8.1.2.13.1.18,GSM7224-SWITCHING-MIB::agentPortMaxFrameSizeLimit,Integer32,read-only,,current,,This object identifies the largest value that can be configured for agentPortMaxFrameSize
.1.3.6.1.4.1.4526.1.8.1.2.13.1.19,GSM7224-SWITCHING-MIB::agentPortMaxFrameSize,Integer32,read-write,,current,,This object identifies the currently configured maximum frame size value for this port. The maximmum value that this object can be set to is the value of agentPortMaxFrameSizeLimit. For Ethernet ports which support 802.1Q vlan tagging, the minimum value that this object can be set to is 1522
.1.3.6.1.4.1.4526.1.8.1.2.14,GSM7224-SWITCHING-MIB::agentProtocolConfigGroup,,,,,,
.1.3.6.1.4.1.4526.1.8.1.2.14.1,GSM7224-SWITCHING-MIB::agentProtocolGroupCreate,OCTET,read-write,,current,,Set to non-empty string to create a Protocol-Based VLAN group.
.1.3.6.1.4.1.4526.1.8.1.2.14.2,GSM7224-SWITCHING-MIB::agentProtocolGroupTable,,not-accessible,,current,,A table of the switch's Protocol-based VLAN entries
.1.3.6.1.4.1.4526.1.8.1.2.14.2.1,GSM7224-SWITCHING-MIB::agentProtocolGroupEntry,,not-accessible,agentProtocolGroupId,current,,Switch's Protocol-based VLAN entry
.1.3.6.1.4.1.4526.1.8.1.2.14.2.1.1,GSM7224-SWITCHING-MIB::agentProtocolGroupId,Integer32,read-only,,current,,Group identifier of the Protocol-based VLAN entry.
.1.3.6.1.4.1.4526.1.8.1.2.14.2.1.2,GSM7224-SWITCHING-MIB::agentProtocolGroupName,OCTET,read-only,,current,,Group name of the Protocol-based VLAN entry.
.1.3.6.1.4.1.4526.1.8.1.2.14.2.1.3,GSM7224-SWITCHING-MIB::agentProtocolGroupVlanId,Integer32,read-write,,current,,VLAN associated with the Protocol-based VLAN entry. Set to 0 to remove.
.1.3.6.1.4.1.4526.1.8.1.2.14.2.1.4,GSM7224-SWITCHING-MIB::agentProtocolGroupProtocolIP,INTEGER,read-write,,current,enable(1):disable(2),The status of the IP protocol association with the Protocol-based VLAN entry.
.1.3.6.1.4.1.4526.1.8.1.2.14.2.1.5,GSM7224-SWITCHING-MIB::agentProtocolGroupProtocolARP,INTEGER,read-write,,current,enable(1):disable(2),The status of the ARP protocol association with the Protocol-based VLAN entry.
.1.3.6.1.4.1.4526.1.8.1.2.14.2.1.6,GSM7224-SWITCHING-MIB::agentProtocolGroupProtocolIPX,INTEGER,read-write,,current,enable(1):disable(2),The status of the IPX protocol association with the Protocol-based VLAN entry.
.1.3.6.1.4.1.4526.1.8.1.2.14.2.1.7,GSM7224-SWITCHING-MIB::agentProtocolGroupStatus,INTEGER,read-write,,current,active(1):notInService(2):notReady(3):createAndGo(4):createAndWait(5):destroy(6),The status of the Protocol-based VLAN entry.  active(1) - this entry is active destroy(6) - remove this entry
.1.3.6.1.4.1.4526.1.8.1.2.14.3,GSM7224-SWITCHING-MIB::agentProtocolGroupPortTable,,not-accessible,,current,,A table of the switch's physical port config entries
.1.3.6.1.4.1.4526.1.8.1.2.14.3.1,GSM7224-SWITCHING-MIB::agentProtocolGroupPortEntry,,not-accessible,agentProtocolGroupId:agentProtocolGroupPortIfIndex,current,,Switch's physical port config entry
.1.3.6.1.4.1.4526.1.8.1.2.14.3.1.1,GSM7224-SWITCHING-MIB::agentProtocolGroupPortIfIndex,Integer32,read-only,,current,,The interface number of this instance.
.1.3.6.1.4.1.4526.1.8.1.2.14.3.1.2,GSM7224-SWITCHING-MIB::agentProtocolGroupPortStatus,INTEGER,read-create,,current,active(1):notInService(2):notReady(3):createAndGo(4):createAndWait(5):destroy(6),The status of this entry.  active(1) - the port is associated with this group createAndGo(4) - add the port to this group createAndWait(5) - add the port to this group destroy(6) - remove the port from this group
.1.3.6.1.4.1.4526.1.8.1.2.15,GSM7224-SWITCHING-MIB::agentStpSwitchConfigGroup,,,,,,
.1.3.6.1.4.1.4526.1.8.1.2.15.1,GSM7224-SWITCHING-MIB::agentStpConfigDigestKey,OCTET,read-only,,current,,The MST configuration digest key.
.1.3.6.1.4.1.4526.1.8.1.2.15.2,GSM7224-SWITCHING-MIB::agentStpConfigFormatSelector,Unsigned32,read-only,,current,,The MST configuration format selector. A value other than 0 (zero)  indicates non-support for the IEEE 802.1s standard.
.1.3.6.1.4.1.4526.1.8.1.2.15.3,GSM7224-SWITCHING-MIB::agentStpConfigName,OCTET,read-write,,current,,The MST configuration name of at most 32 characters.
.1.3.6.1.4.1.4526.1.8.1.2.15.4,GSM7224-SWITCHING-MIB::agentStpConfigRevision,Unsigned32,read-write,,current,,The MST configuration revision. The default value is 1.
.1.3.6.1.4.1.4526.1.8.1.2.15.5,GSM7224-SWITCHING-MIB::agentStpForceVersion,INTEGER,read-write,,current,dot1d(1):dot1w(2):dot1s(3),The MST configuration force protocol version. The default version is dot1s.
.1.3.6.1.4.1.4526.1.8.1.2.15.6,GSM7224-SWITCHING-MIB::agentStpAdminMode,INTEGER,read-write,,current,enable(1):disable(2),The spanning tree operational status.  enable(1) - enables spanning tree operational status on the switch. disable(2) - disables spanning tree operational status on the switch.  The default status is disabled.
.1.3.6.1.4.1.4526.1.8.1.2.15.7,GSM7224-SWITCHING-MIB::agentStpPortTable,,not-accessible,,current,,STP port table.
.1.3.6.1.4.1.4526.1.8.1.2.15.7.1,GSM7224-SWITCHING-MIB::agentStpPortEntry,,not-accessible,ifIndex,current,,STP port entry.
.1.3.6.1.4.1.4526.1.8.1.2.15.7.1.1,GSM7224-SWITCHING-MIB::agentStpPortState,INTEGER,read-write,,current,enable(1):disable(2),The administrative bridge port state.  enable(1) - enables the port. disable(2) - disables the port.  The default port state is enabled for the first 4095 ports and  disabled for any ports beyond.
.1.3.6.1.4.1.4526.1.8.1.2.15.7.1.2,GSM7224-SWITCHING-MIB::agentStpPortStatsMstpBpduRx,Counter32,read-only,,current,,The MSTP BPDUs received on a specific port.
.1.3.6.1.4.1.4526.1.8.1.2.15.7.1.3,GSM7224-SWITCHING-MIB::agentStpPortStatsMstpBpduTx,Counter32,read-only,,current,,The MSTP BPDUs sent from a specific port.
.1.3.6.1.4.1.4526.1.8.1.2.15.7.1.4,GSM7224-SWITCHING-MIB::agentStpPortStatsRstpBpduRx,Counter32,read-only,,current,,The RSTP BPDUs received on a specific port.
.1.3.6.1.4.1.4526.1.8.1.2.15.7.1.5,GSM7224-SWITCHING-MIB::agentStpPortStatsRstpBpduTx,Counter32,read-only,,current,,The RSTP BPDUs sent from a specific port.
.1.3.6.1.4.1.4526.1.8.1.2.15.7.1.6,GSM7224-SWITCHING-MIB::agentStpPortStatsStpBpduRx,Counter32,read-only,,current,,The STP BPDUs received on a specific port.
.1.3.6.1.4.1.4526.1.8.1.2.15.7.1.7,GSM7224-SWITCHING-MIB::agentStpPortStatsStpBpduTx,Counter32,read-only,,current,,The STP BPDUs sent from a specific port.
.1.3.6.1.4.1.4526.1.8.1.2.15.7.1.8,GSM7224-SWITCHING-MIB::agentStpPortUpTime,TimeTicks,read-only,,current,,Time since port was reset.  It is displayed in days, hours, minutes, and seconds.
.1.3.6.1.4.1.4526.1.8.1.2.15.7.1.9,GSM7224-SWITCHING-MIB::agentStpPortMigrationCheck,INTEGER,read-write,,current,false(0):true(1),Force the specified port to transmit RSTP or MSTP BPDU's.   Supported values: false(0) - BPDUs are not to be transmitted. true(1) - BPDUs are to be transmitted  A non-zero value indicates that BPDUs are to be sent on the specified port.
.1.3.6.1.4.1.4526.1.8.1.2.15.8,GSM7224-SWITCHING-MIB::agentStpCstConfigGroup,,,,,,
.1.3.6.1.4.1.4526.1.8.1.2.15.8.1,GSM7224-SWITCHING-MIB::agentStpCstHelloTime,Unsigned32,read-only,,current,,The MSTP root port hello time for the CIST.
.1.3.6.1.4.1.4526.1.8.1.2.15.8.2,GSM7224-SWITCHING-MIB::agentStpCstMaxAge,Unsigned32,read-only,,current,,The MSTP root port max age for the CIST.
.1.3.6.1.4.1.4526.1.8.1.2.15.8.3,GSM7224-SWITCHING-MIB::agentStpCstRegionalRootId,OCTET,read-only,,current,,The MSTP regional root identifier for the CIST.
.1.3.6.1.4.1.4526.1.8.1.2.15.8.4,GSM7224-SWITCHING-MIB::agentStpCstRegionalRootPathCost,Unsigned32,read-only,,current,,The MSTP regional root path cost for the CIST.
.1.3.6.1.4.1.4526.1.8.1.2.15.8.5,GSM7224-SWITCHING-MIB::agentStpCstRootFwdDelay,Unsigned32,read-only,,current,,The MSTP root port forward delay for the CIST.
.1.3.6.1.4.1.4526.1.8.1.2.15.8.6,GSM7224-SWITCHING-MIB::agentStpCstBridgeFwdDelay,Unsigned32,read-write,,current,,The MSTP bridge forward delay for the CIST. The default value is 15.
.1.3.6.1.4.1.4526.1.8.1.2.15.8.7,GSM7224-SWITCHING-MIB::agentStpCstBridgeHelloTime,Unsigned32,read-write,,current,,The MSTP bridge hello time for the CIST. The default value is 2.
.1.3.6.1.4.1.4526.1.8.1.2.15.8.8,GSM7224-SWITCHING-MIB::agentStpCstBridgeHoldTime,Unsigned32,read-only,,current,,The MSTP bridge hold time for the CIST.
.1.3.6.1.4.1.4526.1.8.1.2.15.8.9,GSM7224-SWITCHING-MIB::agentStpCstBridgeMaxAge,Unsigned32,read-write,,current,,The MSTP bridge max age for the CIST. The default value is 20.
.1.3.6.1.4.1.4526.1.8.1.2.15.9,GSM7224-SWITCHING-MIB::agentStpCstPortTable,,not-accessible,,current,,CIST port table.
.1.3.6.1.4.1.4526.1.8.1.2.15.9.1,GSM7224-SWITCHING-MIB::agentStpCstPortEntry,,not-accessible,ifIndex,current,,CIST port entry.
.1.3.6.1.4.1.4526.1.8.1.2.15.9.1.1,GSM7224-SWITCHING-MIB::agentStpCstPortOperEdge,INTEGER,read-only,,current,enable(1):disable(2),The MSTP operational status of a specific port for the CIST.
.1.3.6.1.4.1.4526.1.8.1.2.15.9.1.2,GSM7224-SWITCHING-MIB::agentStpCstPortOperPointToPoint,INTEGER,read-only,,current,true(1):false(2),The MSTP operational point to point mac of a specific port for the CIST.
.1.3.6.1.4.1.4526.1.8.1.2.15.9.1.3,GSM7224-SWITCHING-MIB::agentStpCstPortTopologyChangeAck,INTEGER,read-only,,current,true(1):false(2),The MSTP topology change acknowledge for a specific port in the CIST.
.1.3.6.1.4.1.4526.1.8.1.2.15.9.1.4,GSM7224-SWITCHING-MIB::agentStpCstPortEdge,INTEGER,read-write,,current,enable(1):disable(2),The administrative state of a specific port in CIST.  enable(1) - enables the port. disable(2) - disables the port.  The default port state is disabled.
.1.3.6.1.4.1.4526.1.8.1.2.15.9.1.5,GSM7224-SWITCHING-MIB::agentStpCstPortForwardingState,INTEGER,read-only,,current,discarding(1):learning(2):forwarding(3):disabled(4):manualFwd(5):notParticipate(6),The MSTP forwarding state of a specific port in CIST.
.1.3.6.1.4.1.4526.1.8.1.2.15.9.1.6,GSM7224-SWITCHING-MIB::agentStpCstPortId,OCTET,read-only,,current,,The MSTP port identifier of a specific port in CIST.
.1.3.6.1.4.1.4526.1.8.1.2.15.9.1.7,GSM7224-SWITCHING-MIB::agentStpCstPortPathCost,Unsigned32,read-write,,current,,The MSTP port path cost in CIST. The default value will  correspond to the recommendation specified in IEEE 802.1s Table 13-2  which varies depending upon link speed.
.1.3.6.1.4.1.4526.1.8.1.2.15.9.1.8,GSM7224-SWITCHING-MIB::agentStpCstPortPriority,Unsigned32,read-write,,current,,The MSTP port priority in CIST. The priority is  in the increments of 16. The default value is 128.
.1.3.6.1.4.1.4526.1.8.1.2.15.9.1.9,GSM7224-SWITCHING-MIB::agentStpCstDesignatedBridgeId,OCTET,read-only,,current,,The MSTP designated bridge ID of a specific port in CIST.
.1.3.6.1.4.1.4526.1.8.1.2.15.9.1.10,GSM7224-SWITCHING-MIB::agentStpCstDesignatedCost,Unsigned32,read-only,,current,,The MSTP designated cost of a specific port in CIST.
.1.3.6.1.4.1.4526.1.8.1.2.15.9.1.11,GSM7224-SWITCHING-MIB::agentStpCstDesignatedPortId,OCTET,read-only,,current,,The MSTP designated port ID of a specific port in CIST.
.1.3.6.1.4.1.4526.1.8.1.2.15.10,GSM7224-SWITCHING-MIB::agentStpMstTable,,not-accessible,,current,,MST table.
.1.3.6.1.4.1.4526.1.8.1.2.15.10.1,GSM7224-SWITCHING-MIB::agentStpMstEntry,,not-accessible,agentStpMstId,current,,MST entry.
.1.3.6.1.4.1.4526.1.8.1.2.15.10.1.1,GSM7224-SWITCHING-MIB::agentStpMstId,Unsigned32,read-only,,current,,The MSTP instance ID.
.1.3.6.1.4.1.4526.1.8.1.2.15.10.1.2,GSM7224-SWITCHING-MIB::agentStpMstBridgePriority,Unsigned32,read-write,,current,,The MSTP bridge priority in a specific instance. The priority is  in the increments of 4096. The recommended default value is 32768.
.1.3.6.1.4.1.4526.1.8.1.2.15.10.1.3,GSM7224-SWITCHING-MIB::agentStpMstBridgeIdentifier,OCTET,read-only,,current,,The MSTP bridge identifier in a specific instance.
.1.3.6.1.4.1.4526.1.8.1.2.15.10.1.4,GSM7224-SWITCHING-MIB::agentStpMstDesignatedRootId,OCTET,read-only,,current,,The MSTP designated root bridge identifier in a specific instance.
.1.3.6.1.4.1.4526.1.8.1.2.15.10.1.5,GSM7224-SWITCHING-MIB::agentStpMstRootPathCost,Unsigned32,read-only,,current,,The MSTP root path cost in a specific instance.
.1.3.6.1.4.1.4526.1.8.1.2.15.10.1.6,GSM7224-SWITCHING-MIB::agentStpMstRootPortId,OCTET,read-only,,current,,The MSTP root port ID in a specific instance.
.1.3.6.1.4.1.4526.1.8.1.2.15.10.1.7,GSM7224-SWITCHING-MIB::agentStpMstTimeSinceTopologyChange,TimeTicks,read-only,,current,,The MSTP time since the last topology change in a specific instance.
.1.3.6.1.4.1.4526.1.8.1.2.15.10.1.8,GSM7224-SWITCHING-MIB::agentStpMstTopologyChangeCount,Counter32,read-only,,current,,The MSTP count of topology changes in a specific instance.
.1.3.6.1.4.1.4526.1.8.1.2.15.10.1.9,GSM7224-SWITCHING-MIB::agentStpMstTopologyChangeParm,INTEGER,read-only,,current,true(1):false(2),The MSTP topology change parameter in a specific instance.
.1.3.6.1.4.1.4526.1.8.1.2.15.10.1.10,GSM7224-SWITCHING-MIB::agentStpMstRowStatus,INTEGER,read-create,,current,active(1):notInService(2):notReady(3):createAndGo(4):createAndWait(5):destroy(6),The MSTP instance status.  Supported values: active(1) - valid instance. createAndGo(4) - used to create a new instance. destroy(6) - removes an instance.
.1.3.6.1.4.1.4526.1.8.1.2.15.11,GSM7224-SWITCHING-MIB::agentStpMstPortTable,,not-accessible,,current,,MST port table.
.1.3.6.1.4.1.4526.1.8.1.2.15.11.1,GSM7224-SWITCHING-MIB::agentStpMstPortEntry,,not-accessible,agentStpMstId:ifIndex,current,,MST port entry.
.1.3.6.1.4.1.4526.1.8.1.2.15.11.1.1,GSM7224-SWITCHING-MIB::agentStpMstPortForwardingState,INTEGER,read-only,,current,discarding(1):learning(2):forwarding(3):disabled(4):manualFwd(5):notParticipate(6),The MSTP forwarding state of a specific port in a specific instance.
.1.3.6.1.4.1.4526.1.8.1.2.15.11.1.2,GSM7224-SWITCHING-MIB::agentStpMstPortId,OCTET,read-only,,current,,The MSTP port identifier of a specific port in a specific instance.
.1.3.6.1.4.1.4526.1.8.1.2.15.11.1.3,GSM7224-SWITCHING-MIB::agentStpMstPortPathCost,Unsigned32,read-write,,current,,The MSTP port path cost in a specific instance. The default value will  correspond to the recommendation specified in IEEE 802.1s Table 13-2  which varies depending upon link speed.
.1.3.6.1.4.1.4526.1.8.1.2.15.11.1.4,GSM7224-SWITCHING-MIB::agentStpMstPortPriority,Unsigned32,read-write,,current,,The MSTP port priority in a specific instance. The priority is  in the increments of 16. The default value is 128.
.1.3.6.1.4.1.4526.1.8.1.2.15.11.1.5,GSM7224-SWITCHING-MIB::agentStpMstDesignatedBridgeId,OCTET,read-only,,current,,The MSTP designated bridge ID of a specific port in a specific instance.
.1.3.6.1.4.1.4526.1.8.1.2.15.11.1.6,GSM7224-SWITCHING-MIB::agentStpMstDesignatedCost,Unsigned32,read-only,,current,,The MSTP designated cost of a specific port in a specific instance.
.1.3.6.1.4.1.4526.1.8.1.2.15.11.1.7,GSM7224-SWITCHING-MIB::agentStpMstDesignatedPortId,OCTET,read-only,,current,,The MSTP designated port ID of a specific port in a specific instance.
.1.3.6.1.4.1.4526.1.8.1.2.15.12,GSM7224-SWITCHING-MIB::agentStpMstVlanTable,,not-accessible,,current,,MST VLAN table.
.1.3.6.1.4.1.4526.1.8.1.2.15.12.1,GSM7224-SWITCHING-MIB::agentStpMstVlanEntry,,not-accessible,agentStpMstId:dot1qVlanIndex,current,,MST VLAN entry.
.1.3.6.1.4.1.4526.1.8.1.2.15.12.1.1,GSM7224-SWITCHING-MIB::agentStpMstVlanRowStatus,INTEGER,read-create,,current,active(1):notInService(2):notReady(3):createAndGo(4):createAndWait(5):destroy(6),The association status of an MSTP instance and a VLAN.  Supported values: active(1) - valid association between an MSTP instance and a VLAN. createAndGo(4) - used to create a new association between an MSTP instance and a VLAN. destroy(6) - removes the association between an MSTP instance and a VLAN.
.1.3.6.1.4.1.4526.1.8.1.2.16,GSM7224-SWITCHING-MIB::agentAuthenticationGroup,,,,,,
.1.3.6.1.4.1.4526.1.8.1.2.16.1,GSM7224-SWITCHING-MIB::agentAuthenticationListCreate,OCTET,read-write,,current,,Authentication List Create If set to a non empty string, creates a new Authentication List for configuration.
.1.3.6.1.4.1.4526.1.8.1.2.16.2,GSM7224-SWITCHING-MIB::agentAuthenticationListTable,,not-accessible,,current,,MST VLAN table.
.1.3.6.1.4.1.4526.1.8.1.2.16.2.1,GSM7224-SWITCHING-MIB::agentAuthenticationListEntry,,not-accessible,agentAuthenticationListIndex,current,,MST VLAN entry.
.1.3.6.1.4.1.4526.1.8.1.2.16.2.1.1,GSM7224-SWITCHING-MIB::agentAuthenticationListIndex,Unsigned32,not-accessible,,current,,Authenticaiton List Index Unique number used for indexing into this table.
.1.3.6.1.4.1.4526.1.8.1.2.16.2.1.2,GSM7224-SWITCHING-MIB::agentAuthenticationListName,OCTET,read-only,,current,,Authenticaiton List Name Unique name used to identify the Authentication List from other tables.
.1.3.6.1.4.1.4526.1.8.1.2.16.2.1.3,GSM7224-SWITCHING-MIB::agentAuthenticationListMethod1,INTEGER,read-write,,current,local(1):radius(2):reject(3),Authenticion List Method 1 Configures the first authentication method to use when this list is  specified.
.1.3.6.1.4.1.4526.1.8.1.2.16.2.1.4,GSM7224-SWITCHING-MIB::agentAuthenticationListMethod2,INTEGER,read-write,,current,undefined(1):local(2):radius(3):reject(4),Authenticion List Method 2 Configures the second authentication method to use when this list is  specified.
.1.3.6.1.4.1.4526.1.8.1.2.16.2.1.5,GSM7224-SWITCHING-MIB::agentAuthenticationListMethod3,INTEGER,read-write,,current,undefined(1):local(2):radius(3):reject(4),Authenticion List Method 3 Configures the third authentication method to use when this list is  specified.
.1.3.6.1.4.1.4526.1.8.1.2.16.2.1.6,GSM7224-SWITCHING-MIB::agentAuthenticationListStatus,INTEGER,read-write,,current,active(1):notInService(2):notReady(3):createAndGo(4):createAndWait(5):destroy(6),The status of the Authentication List.  Supported values: active(1) - indicates a valid Authenticaiton List destroy(6) - removes the Authentication List.
.1.3.6.1.4.1.4526.1.8.1.2.16.3,GSM7224-SWITCHING-MIB::agentUserConfigDefaultAuthenticationList,OCTET,read-write,,current,,Default Authentication List This object configures which authentication list to use for users which do not have an Authentication List configured. The list  must be configured before setting.
.1.3.6.1.4.1.4526.1.8.1.2.16.4,GSM7224-SWITCHING-MIB::agentUserAuthenticationConfigTable,,not-accessible,,current,,User Authentication Config Table
.1.3.6.1.4.1.4526.1.8.1.2.16.4.1,GSM7224-SWITCHING-MIB::agentUserAuthenticationConfigEntry,,not-accessible,,current,,User Authentication Config Entry
.1.3.6.1.4.1.4526.1.8.1.2.16.4.1.1,GSM7224-SWITCHING-MIB::agentUserAuthenticationList,OCTET,read-write,,current,,User Authentication List This object configures which authentication list to use for this user. The list must be configured before setting.
.1.3.6.1.4.1.4526.1.8.1.2.16.5,GSM7224-SWITCHING-MIB::agentUserPortConfigTable,,not-accessible,,current,,User Port Config Table
.1.3.6.1.4.1.4526.1.8.1.2.16.5.1,GSM7224-SWITCHING-MIB::agentUserPortConfigEntry,,not-accessible,,current,,User Port Config Entry
.1.3.6.1.4.1.4526.1.8.1.2.16.5.1.1,GSM7224-SWITCHING-MIB::agentUserPortSecurity,OCTET,read-write,,current,,User Port Port Security This object configures which ports the user has access to. Ports are indexed based on dot1dBasePort entries in  dot1dBasePortTable.
.1.3.6.1.4.1.4526.1.8.1.2.17,GSM7224-SWITCHING-MIB::agentClassOfServiceGroup,,,,,,
.1.3.6.1.4.1.4526.1.8.1.2.17.1,GSM7224-SWITCHING-MIB::agentClassOfServiceTable,,not-accessible,,current,,A table that contains information about the 802.1p priority mapping to traffic class priority queue for every physical port.
.1.3.6.1.4.1.4526.1.8.1.2.17.1.1,GSM7224-SWITCHING-MIB::agentClassOfServiceEntry,,not-accessible,agentClassOfServicePriority,current,,A 802.1p priority mapped to a traffic class priority queue.
.1.3.6.1.4.1.4526.1.8.1.2.17.1.1.1,GSM7224-SWITCHING-MIB::agentClassOfServicePriority,Integer32,not-accessible,,current,,The Priority value determined for the received frame. This value is equivalent to the priority indicated in the tagged frame received, or one of the evaluated priorities, determined according to the media-type. For untagged frames received from Ethernet media, this value is equal to the dot1dPortDefaultUserPriority value for the ingress port.
.1.3.6.1.4.1.4526.1.8.1.2.17.1.1.2,GSM7224-SWITCHING-MIB::agentClassOfServiceClass,Integer32,read-write,,current,,Traffic class priority queue the received frame is mapped to.
.1.3.6.1.4.1.4526.1.8.1.3,GSM7224-SWITCHING-MIB::agentSystemGroup,,,,,,
.1.3.6.1.4.1.4526.1.8.1.3.1,GSM7224-SWITCHING-MIB::agentSaveConfig,INTEGER,read-write,,current,enable(1):disable(2),Enable agentSaveConfig will initiate an configuration save to nvram. Disable agentSaveConfig after a configuration save will reset  agentSaveConfigStatus back to notInitiated state.
.1.3.6.1.4.1.4526.1.8.1.3.2,GSM7224-SWITCHING-MIB::agentClearConfig,INTEGER,read-write,,current,enable(1):disable(2),clear config to factory defaults
.1.3.6.1.4.1.4526.1.8.1.3.3,GSM7224-SWITCHING-MIB::agentClearLags,INTEGER,read-write,,current,enable(1):disable(2),clear lag configuration
.1.3.6.1.4.1.4526.1.8.1.3.4,GSM7224-SWITCHING-MIB::agentClearLoginSessions,INTEGER,read-write,,current,enable(1):disable(2),close all telnet sessions
.1.3.6.1.4.1.4526.1.8.1.3.5,GSM7224-SWITCHING-MIB::agentClearPasswords,INTEGER,read-write,,current,enable(1):disable(2),reset passwords
.1.3.6.1.4.1.4526.1.8.1.3.6,GSM7224-SWITCHING-MIB::agentClearPortStats,INTEGER,read-write,,current,enable(1):disable(2),clear all port statistics
.1.3.6.1.4.1.4526.1.8.1.3.7,GSM7224-SWITCHING-MIB::agentClearSwitchStats,INTEGER,read-write,,current,enable(1):disable(2),clear all switch statistics
.1.3.6.1.4.1.4526.1.8.1.3.8,GSM7224-SWITCHING-MIB::agentClearTrapLog,INTEGER,read-write,,current,enable(1):disable(2),clear trap log
.1.3.6.1.4.1.4526.1.8.1.3.9,GSM7224-SWITCHING-MIB::agentClearVlan,INTEGER,read-write,,current,enable(1):disable(2),clear vlan entries
.1.3.6.1.4.1.4526.1.8.1.3.10,GSM7224-SWITCHING-MIB::agentResetSystem,INTEGER,read-write,,current,enable(1):disable(2),reset the switch
.1.3.6.1.4.1.4526.1.8.1.3.11,GSM7224-SWITCHING-MIB::agentSaveConfigStatus,INTEGER,read-only,,current,notInitiated(1):savingInProcess(2):savingComplete(3),Indicates the current status of an save configuration request.
.1.3.6.1.4.1.4526.1.8.1.4,GSM7224-SWITCHING-MIB::agentCableTesterGroup,,,,,,
.1.3.6.1.4.1.4526.1.8.1.4.1,GSM7224-SWITCHING-MIB::agentCableTesterStatus,INTEGER,read-write,,current,active(1):success(2):failure(3):uninitialized(4),Status of the Virtual Cable Tester active(1) - cable testing is in progress. Set to this value to start the test. success(2) - A successful test was performed. Cannot be set. failure(3) - A failure was encountered during the test. Cannot be set. uninitialized(4) - No test has been performed yet. Cannot be set.
.1.3.6.1.4.1.4526.1.8.1.4.2,GSM7224-SWITCHING-MIB::agentCableTesterIfIndex,Unsigned32,read-write,,current,,Determines on which port to perform the cable test. Limited to  copper based ports.
.1.3.6.1.4.1.4526.1.8.1.4.3,GSM7224-SWITCHING-MIB::agentCableTesterCableStatus,INTEGER,read-only,,current,normal(1):open(2):short(3):unknown(4),Indicates the results of the Cable Test.   normal(1) - The cable is working correctly. open(2) - The cable is disconnected or there is a faulty connector. short(3) - There is an electrical short in the cable. unknown(4) - No test has been performed yet, or a test is currently in progress.
.1.3.6.1.4.1.4526.1.8.1.4.4,GSM7224-SWITCHING-MIB::agentCableTesterMinimumCableLength,Unsigned32,read-only,,current,,The estimated length of the cable in meters. This value  indicates the shortest length estimated. This object will return 0 if agentCableTesterStatus is not success(2) or the cable length is unknown.
.1.3.6.1.4.1.4526.1.8.1.4.5,GSM7224-SWITCHING-MIB::agentCableTesterMaximumCableLength,Unsigned32,read-only,,current,,The estimated length of the cable in meters. This value  indicates the longest length estimated. This object will return 0 if agentCableTesterStatus is not success(2) or the cable length is unknown.
.1.3.6.1.4.1.4526.1.8.1.4.6,GSM7224-SWITCHING-MIB::agentCableTesterCableFailureLocation,Unsigned32,read-only,,current,,The estimated distance in meters from the end of the cable to the failure location. This object will return 0 if  agentCableTesterStatus is not success(2).
.1.3.6.1.4.1.4526.1.8.1.50,GSM7224-SWITCHING-MIB::gsm7224SwitchingTraps,,,,,,
.1.3.6.1.4.1.4526.1.8.1.50.1,GSM7224-SWITCHING-MIB::multipleUsersTrap,,,,,,trapMgrMultipleUsersLogTrap.
.1.3.6.1.4.1.4526.1.8.1.50.2,GSM7224-SWITCHING-MIB::broadcastStormStartTrap,,,,,,trapMgrBCastStormStartLogTrap.
.1.3.6.1.4.1.4526.1.8.1.50.3,GSM7224-SWITCHING-MIB::broadcastStormEndTrap,,,,,,trapMgrBCastStormEndLogTrap.
.1.3.6.1.4.1.4526.1.8.1.50.4,GSM7224-SWITCHING-MIB::linkFailureTrap,,,,,,trapMgrLinkFailureLogTrap.
.1.3.6.1.4.1.4526.1.8.1.50.5,GSM7224-SWITCHING-MIB::vlanRequestFailureTrap,,,,,,trapMgrVlanRequestFailureLogTrap
.1.3.6.1.4.1.4526.1.8.1.50.6,GSM7224-SWITCHING-MIB::vlanDeleteLastTrap,,,,,,trapMgrLastVlanDeleteLastLogTrap
.1.3.6.1.4.1.4526.1.8.1.50.7,GSM7224-SWITCHING-MIB::vlanDefaultCfgFailureTrap,,,,,,trapMgrDefaultVlanCfgFailureLogTrap
.1.3.6.1.4.1.4526.1.8.1.50.8,GSM7224-SWITCHING-MIB::vlanRestoreFailureTrap,,,,,,trapMgrVlanRestoreFailureLogTrap
.1.3.6.1.4.1.4526.1.8.1.50.9,GSM7224-SWITCHING-MIB::fanFailureTrap,,,,,,trapMgrFanFailureLogTrap.
.1.3.6.1.4.1.4526.1.8.1.50.10,GSM7224-SWITCHING-MIB::stpInstanceNewRootTrap,,,,,,trapMgrStpInstanceNewRootTrap
.1.3.6.1.4.1.4526.1.8.1.50.11,GSM7224-SWITCHING-MIB::stpInstanceTopologyChangeTrap,,,,,,trapMgrStpInstanceTopologyChange
.1.3.6.1.4.1.4526.1.8.1.50.12,GSM7224-SWITCHING-MIB::powerSupplyStatusChangeTrap,,,,,,powerSupplyStatusChangeTrap
.1.3.6.1.4.1.4526.1.8.8,GSM7224-RADIUS-MIB::gsm7224Radius,,,,,,The GSM7224 Radius MIB
.1.3.6.1.4.1.4526.1.8.8.1,GSM7224-RADIUS-MIB::agentRadiusConfigGroup,,,,,,
.1.3.6.1.4.1.4526.1.8.8.1.1,GSM7224-RADIUS-MIB::agentRadiusMaxTransmit,Unsigned32,read-write,,current,,Maximum number of retransmissions of a RADIUS request packet
.1.3.6.1.4.1.4526.1.8.8.1.2,GSM7224-RADIUS-MIB::agentRadiusTimeout,Unsigned32,read-write,,current,,Time out duration (in seconds) before packets are retransmitted
.1.3.6.1.4.1.4526.1.8.8.1.3,GSM7224-RADIUS-MIB::agentRadiusAccountingMode,INTEGER,read-write,,current,enable(1):disable(2),Identifies if RADIUS Accounting has been enabled or not
.1.3.6.1.4.1.4526.1.8.8.1.4,GSM7224-RADIUS-MIB::agentRadiusStatsClear,INTEGER,read-write,,current,enable(1):disable(2),When set to enable(1), all Radius statistics will be reset.
.1.3.6.1.4.1.4526.1.8.8.1.5,GSM7224-RADIUS-MIB::agentRadiusAccountingIndexNextValid,Integer32,read-only,,current,,Indicates the next valid index into the agentRadiusAccountingConfigTable  for creation. If no additional entries are allowed, this will be 0.
.1.3.6.1.4.1.4526.1.8.8.1.6,GSM7224-RADIUS-MIB::agentRadiusAccountingConfigTable,,not-accessible,,current,,Table with information about Radius Accounting Server IP Addresses, port numbers and shared secret. Only one entry is supported at this time.
.1.3.6.1.4.1.4526.1.8.8.1.6.1,GSM7224-RADIUS-MIB::agentRadiusAccountingConfigEntry,,not-accessible,agentRadiusAccountingServerIndex,current,,Entry consisting of configuration data for a Radius Accounting Server.
.1.3.6.1.4.1.4526.1.8.8.1.6.1.1,GSM7224-RADIUS-MIB::agentRadiusAccountingServerIndex,Integer32,not-accessible,,current,,Unique index of the configured RADIUS accounting server
.1.3.6.1.4.1.4526.1.8.8.1.6.1.2,GSM7224-RADIUS-MIB::agentRadiusAccountingServerAddress,IpAddress,read-create,,current,,IP Address of the configured RADIUS accounting server. This object cannot be changed after creation.
.1.3.6.1.4.1.4526.1.8.8.1.6.1.3,GSM7224-RADIUS-MIB::agentRadiusAccountingPort,Unsigned32,read-write,,current,,Port number for the RADIUS accounting server. This object cannot be configured on row creation.
.1.3.6.1.4.1.4526.1.8.8.1.6.1.4,GSM7224-RADIUS-MIB::agentRadiusAccountingSecret,OCTET,read-write,,current,,Configured shared sercret for the RADIUS accounting server. This object cannot be configured on row creation.
.1.3.6.1.4.1.4526.1.8.8.1.6.1.5,GSM7224-RADIUS-MIB::agentRadiusAccountingStatus,INTEGER,read-create,,current,active(1):notInService(2):notReady(3):createAndGo(4):createAndWait(5):destroy(6),
.1.3.6.1.4.1.4526.1.8.8.1.7,GSM7224-RADIUS-MIB::agentRadiusServerIndexNextValid,Integer32,read-only,,current,,Indicates the next valid index into the agentRadiusServerConfigTable  for creation. If no additional entries are allowed, this will be 0.
.1.3.6.1.4.1.4526.1.8.8.1.8,GSM7224-RADIUS-MIB::agentRadiusServerConfigTable,,not-accessible,,current,,Table with information about Radius Accounting Server IP Addresses, port numbers and shared secret
.1.3.6.1.4.1.4526.1.8.8.1.8.1,GSM7224-RADIUS-MIB::agentRadiusServerConfigEntry,,not-accessible,agentRadiusServerIndex,current,,Entry consisting of configuration data for a Radius Server. Creation requires setting 
.1.3.6.1.4.1.4526.1.8.8.1.8.1.1,GSM7224-RADIUS-MIB::agentRadiusServerIndex,Integer32,not-accessible,,current,,Unique index of the configured RADIUS server
.1.3.6.1.4.1.4526.1.8.8.1.8.1.2,GSM7224-RADIUS-MIB::agentRadiusServerAddress,IpAddress,read-create,,current,,IP Address of the configured RADIUS server. This object cannot be changed after creation.
.1.3.6.1.4.1.4526.1.8.8.1.8.1.3,GSM7224-RADIUS-MIB::agentRadiusServerPort,Unsigned32,read-write,,current,,Port number for the RADIUS server. This object cannot be configured on row creation.
.1.3.6.1.4.1.4526.1.8.8.1.8.1.4,GSM7224-RADIUS-MIB::agentRadiusServerSecret,OCTET,read-write,,current,,Configured shared sercret for the RADIUS server. This object cannot be configured on row creation.
.1.3.6.1.4.1.4526.1.8.8.1.8.1.5,GSM7224-RADIUS-MIB::agentRadiusServerPrimaryMode,INTEGER,read-write,,current,enable(1):disable(2),Configure the RADIUS server to be the primary server. If there is any  other server that is configured to be primary, that server is set to be  a seconday server and this entry is set Primary. This object cannot be configured on row creation.
.1.3.6.1.4.1.4526.1.8.8.1.8.1.6,GSM7224-RADIUS-MIB::agentRadiusServerCurrentMode,INTEGER,read-only,,current,yes(1):no(2),Indicate if the RADIUS server is the current server in user for authentication.
.1.3.6.1.4.1.4526.1.8.8.1.8.1.7,GSM7224-RADIUS-MIB::agentRadiusServerMsgAuth,INTEGER,read-write,,current,enable(1):disable(2),Enable or disable the message authenticator attribute for this  RADIUS server. This object cannot be configured on row creation.
.1.3.6.1.4.1.4526.1.8.8.1.8.1.8,GSM7224-RADIUS-MIB::agentRadiusServerStatus,INTEGER,read-create,,current,active(1):notInService(2):notReady(3):createAndGo(4):createAndWait(5):destroy(6),
.1.3.6.1.4.1.4526.1.8.11,GSM7224-MGMT-SECURITY-MIB::gsm7224MgmtSecurity,,,,,,
.1.3.6.1.4.1.4526.1.8.11.1,GSM7224-MGMT-SECURITY-MIB::agentSSLConfigGroup,,,,,,
.1.3.6.1.4.1.4526.1.8.11.1.1,GSM7224-MGMT-SECURITY-MIB::agentSSLAdminMode,INTEGER,read-write,,current,enable(1):disable(2),Configures whether the SSL service is enabled on this switch. The default value is disable(2).
.1.3.6.1.4.1.4526.1.8.11.1.2,GSM7224-MGMT-SECURITY-MIB::agentSSLSecurePort,Integer32,read-write,,current,,Configures the port the SSL service will respond on. The default  value is 443.
.1.3.6.1.4.1.4526.1.8.11.1.3,GSM7224-MGMT-SECURITY-MIB::agentSSLProtocolLevel,INTEGER,read-write,,current,ssl30(1):tls10(2):both(3),Configures which protocol versions of SSL are enabled on this switch. The default value is both(3).
.1.3.6.1.4.1.4526.1.8.11.2,GSM7224-MGMT-SECURITY-MIB::agentSSHConfigGroup,,,,,,
.1.3.6.1.4.1.4526.1.8.11.2.1,GSM7224-MGMT-SECURITY-MIB::agentSSHAdminMode,INTEGER,read-write,,current,enable(1):disable(2),Configures whether the SSH service is enabled on this switch. The default value is disable(2).
.1.3.6.1.4.1.4526.1.8.11.2.2,GSM7224-MGMT-SECURITY-MIB::agentSSHProtocolLevel,INTEGER,read-write,,current,ssh10(1):ssh20(2):both(3),Configures which protocol versions of SSH are enabled on this switch. The default value is both(3).
.1.3.6.1.4.1.4526.1.8.11.2.3,GSM7224-MGMT-SECURITY-MIB::agentSSHSessionsCount,Integer32,read-only,,current,,Current number of active SSH sessions on this switch.
.1.3.6.1.4.1.4526.1.9,BROADCOM-REF-MIB::fsm7326p,,,,,,
.1.3.6.1.4.1.4526.1.9.1,FSM7326-SWITCHING-MIB::fsm7326Switching,,,,,,
.1.3.6.1.4.1.4526.1.9.1.1,FSM7326-SWITCHING-MIB::agentInfoGroup,,,,,,
.1.3.6.1.4.1.4526.1.9.1.1.1,FSM7326-SWITCHING-MIB::agentInventoryGroup,,,,,,
.1.3.6.1.4.1.4526.1.9.1.1.1.1,FSM7326-SWITCHING-MIB::agentInventorySysDescription,OCTET,read-only,,current,,The switch's Inventory system description. 
.1.3.6.1.4.1.4526.1.9.1.1.1.2,FSM7326-SWITCHING-MIB::agentInventoryMachineType,OCTET,read-only,,current,,Type of the Machine used in the Switch 
.1.3.6.1.4.1.4526.1.9.1.1.1.3,FSM7326-SWITCHING-MIB::agentInventoryBurnedInMacAddress,OCTET,read-only,,current,,Burned-In MAC Address
.1.3.6.1.4.1.4526.1.9.1.1.1.4,FSM7326-SWITCHING-MIB::agentInventoryAdditionalPackages,OCTET,read-only,,current,,Lists additional functional packages available on this unit.
.1.3.6.1.4.1.4526.1.9.1.1.1.5,FSM7326-SWITCHING-MIB::agentInventorySoftwareVersion,OCTET,read-only,,current,,Lists the version of software loaded on this unit.
.1.3.6.1.4.1.4526.1.9.1.1.2,FSM7326-SWITCHING-MIB::agentTrapLogGroup,,,,,,
.1.3.6.1.4.1.4526.1.9.1.1.2.1,FSM7326-SWITCHING-MIB::agentTrapLogTotal,Integer32,read-only,,current,,The total number of traps sent since last reset.
.1.3.6.1.4.1.4526.1.9.1.1.2.3,FSM7326-SWITCHING-MIB::agentTrapLogTotalSinceLastViewed,Integer32,read-only,,deprecated,,The number of traps sent since last viewed.
.1.3.6.1.4.1.4526.1.9.1.1.2.4,FSM7326-SWITCHING-MIB::agentTrapLogTable,,not-accessible,,current,,Agent Trap Log
.1.3.6.1.4.1.4526.1.9.1.1.2.4.1,FSM7326-SWITCHING-MIB::agentTrapLogEntry,,not-accessible,agentTrapLogIndex,current,,Agent trap log entry
.1.3.6.1.4.1.4526.1.9.1.1.2.4.1.1,FSM7326-SWITCHING-MIB::agentTrapLogIndex,Integer32,read-only,,current,,Unique index of trap entry
.1.3.6.1.4.1.4526.1.9.1.1.2.4.1.2,FSM7326-SWITCHING-MIB::agentTrapLogSystemTime,OCTET,read-only,,current,,System uptime when trap was sent.  This entry shows how long the system has been up when the trap occurred.
.1.3.6.1.4.1.4526.1.9.1.1.2.4.1.3,FSM7326-SWITCHING-MIB::agentTrapLogTrap,OCTET,read-only,,current,,Description of the trap sent.
.1.3.6.1.4.1.4526.1.9.1.1.3,FSM7326-SWITCHING-MIB::agentSupportedMibTable,,not-accessible,,current,,Supported MIB table
.1.3.6.1.4.1.4526.1.9.1.1.3.1,FSM7326-SWITCHING-MIB::agentSupportedMibEntry,,not-accessible,agentSupportedMibIndex,current,,Supported MIB entry
.1.3.6.1.4.1.4526.1.9.1.1.3.1.1,FSM7326-SWITCHING-MIB::agentSupportedMibIndex,Integer32,read-only,,current,,Unique index of the Supported MIB entry
.1.3.6.1.4.1.4526.1.9.1.1.3.1.2,FSM7326-SWITCHING-MIB::agentSupportedMibName,OCTET,read-only,,current,,The name of the MIB (RFC or IEEE) that is supported.
.1.3.6.1.4.1.4526.1.9.1.1.3.1.3,FSM7326-SWITCHING-MIB::agentSupportedMibDescription,OCTET,read-only,,current,,Description of the MIB (RFC or IEEE) that is supported.
.1.3.6.1.4.1.4526.1.9.1.2,FSM7326-SWITCHING-MIB::agentConfigGroup,,,,,,
.1.3.6.1.4.1.4526.1.9.1.2.1,FSM7326-SWITCHING-MIB::agentCLIConfigGroup,,,,,,
.1.3.6.1.4.1.4526.1.9.1.2.1.1,FSM7326-SWITCHING-MIB::agentLoginSessionTable,,not-accessible,,current,,A table of the switch's login session
.1.3.6.1.4.1.4526.1.9.1.2.1.1.1,FSM7326-SWITCHING-MIB::agentLoginSessionEntry,,not-accessible,agentLoginSessionIndex,current,,Login Session Entry
.1.3.6.1.4.1.4526.1.9.1.2.1.1.1.1,FSM7326-SWITCHING-MIB::agentLoginSessionIndex,Integer32,read-only,,current,,Agent Login Session Index of the switch
.1.3.6.1.4.1.4526.1.9.1.2.1.1.1.2,FSM7326-SWITCHING-MIB::agentLoginSessionUserName,OCTET,read-only,,current,,Agent Login Session UserName of the switch
.1.3.6.1.4.1.4526.1.9.1.2.1.1.1.3,FSM7326-SWITCHING-MIB::agentLoginSessionIPAddress,IpAddress,read-only,,current,,Agent Login Session IP Address of the switch
.1.3.6.1.4.1.4526.1.9.1.2.1.1.1.4,FSM7326-SWITCHING-MIB::agentLoginSessionConnectionType,INTEGER,read-only,,current,serial(1):telnet(2),Agent Login Session Connection Type of the switch
.1.3.6.1.4.1.4526.1.9.1.2.1.1.1.5,FSM7326-SWITCHING-MIB::agentLoginSessionIdleTime,TimeTicks,read-only,,current,,Agent Login Session Idle Time of the switch
.1.3.6.1.4.1.4526.1.9.1.2.1.1.1.6,FSM7326-SWITCHING-MIB::agentLoginSessionSessionTime,TimeTicks,read-only,,current,,Agent Login Session Time of the switch
.1.3.6.1.4.1.4526.1.9.1.2.1.1.1.7,FSM7326-SWITCHING-MIB::agentLoginSessionStatus,INTEGER,read-write,,current,active(1):notInService(2):notReady(3):createAndGo(4):createAndWait(5):destroy(6),Status of the user. active(1) - This connection is active. destroy(6) - Set to this value to disconnect this user.
.1.3.6.1.4.1.4526.1.9.1.2.1.2,FSM7326-SWITCHING-MIB::agentTelnetConfigGroup,,,,,,
.1.3.6.1.4.1.4526.1.9.1.2.1.2.1,FSM7326-SWITCHING-MIB::agentTelnetLoginTimeout,Integer32,read-write,,current,,Telnet login timeout (minutes)  Config telnet timeout will set the telnet session timeout value.  A session is active as long as the session has not remained idle for  the value set. Specify a value from 0 to 160.  A value of 0 indicates that a Telnet session remains active indefinitely.  Note: Changing the timeout value for active  sessions does not become effective until the session is reaccessed.  Any keystroke will also activate the new timeout duration.
.1.3.6.1.4.1.4526.1.9.1.2.1.2.2,FSM7326-SWITCHING-MIB::agentTelnetMaxSessions,Integer32,read-write,,current,,Maximum number of Telnet Sessions Config telnet maxsessions is an integer value from 0 to 5 that specifies the maximum number of telnet sessions that can be established.  If the value is 0, no Telnet session can be established.  
.1.3.6.1.4.1.4526.1.9.1.2.1.2.3,FSM7326-SWITCHING-MIB::agentTelnetAllowNewMode,INTEGER,read-write,,current,enable(1):disable(2),Allow new telnet sessions (enable or disable) Config telnet disable means that no new Telnet sessions are to be  established. Any already established session remains active until  the session is ended or an abnormal network error ends it.  
.1.3.6.1.4.1.4526.1.9.1.2.1.3,FSM7326-SWITCHING-MIB::agentUserConfigGroup,,,,,,
.1.3.6.1.4.1.4526.1.9.1.2.1.3.1,FSM7326-SWITCHING-MIB::agentUserConfigCreate,OCTET,read-write,,current,,Create a new user. When set with a non-empty string, a new user with that name will be created. This object will only return an empty string. This string is limited to alpha-numeric strings (uncluding the '-' and '_' characters).
.1.3.6.1.4.1.4526.1.9.1.2.1.3.2,FSM7326-SWITCHING-MIB::agentUserConfigTable,,not-accessible,,current,,User Config Table
.1.3.6.1.4.1.4526.1.9.1.2.1.3.2.1,FSM7326-SWITCHING-MIB::agentUserConfigEntry,,not-accessible,agentUserIndex,current,,User Config Entry
.1.3.6.1.4.1.4526.1.9.1.2.1.3.2.1.1,FSM7326-SWITCHING-MIB::agentUserIndex,Integer32,not-accessible,,current,,Agent User Config Index
.1.3.6.1.4.1.4526.1.9.1.2.1.3.2.1.2,FSM7326-SWITCHING-MIB::agentUserName,OCTET,read-write,,current,,Agent User Name. This string is limited to alpha-numeric strings (including the '-' and '_' characters).
.1.3.6.1.4.1.4526.1.9.1.2.1.3.2.1.3,FSM7326-SWITCHING-MIB::agentUserPassword,OCTET,read-write,,current,,Agent User Password This object will return an empty string even if a password is set.
.1.3.6.1.4.1.4526.1.9.1.2.1.3.2.1.4,FSM7326-SWITCHING-MIB::agentUserAccessMode,INTEGER,read-only,,current,read(1):write(2),Agent User Access Mode
.1.3.6.1.4.1.4526.1.9.1.2.1.3.2.1.5,FSM7326-SWITCHING-MIB::agentUserStatus,INTEGER,read-write,,current,active(1):notInService(2):notReady(3):createAndGo(4):createAndWait(5):destroy(6),Agent User Status. active(1) - This user account is active. destroy(6) - Set to this value to remove this user account.
.1.3.6.1.4.1.4526.1.9.1.2.1.3.2.1.6,FSM7326-SWITCHING-MIB::agentUserAuthenticationType,INTEGER,read-write,,current,none(1):hmacmd5(2):hmacsha(3),SNMPv3 User Authentication. The user passsword must be set to a string greater than or equal to 8 characters for this to be set to anything but none(1).  none(1) - no authentication used hmacmd5(1) - Use HMAC-MD5 authentication hmacsha(1) - Use HMAC-SHA authentication
.1.3.6.1.4.1.4526.1.9.1.2.1.3.2.1.7,FSM7326-SWITCHING-MIB::agentUserEncryptionType,INTEGER,read-write,,current,none(1):des(2),SNMPv3 User Encryption Can not be set to des(2) if agentUserAuthenticationType is set to none(1).  none(1) - no encryption used des(2) - DES encryption used
.1.3.6.1.4.1.4526.1.9.1.2.1.3.2.1.8,FSM7326-SWITCHING-MIB::agentUserEncryptionPassword,OCTET,read-write,,current,,SNMPv3 User Encryption Password This object will return an empty string even if a password is  set. agentUserEncryptionType must be set to des(2) before this object can be configured. This object will return an empty string even if a password is set.
.1.3.6.1.4.1.4526.1.9.1.2.1.5,FSM7326-SWITCHING-MIB::agentSerialGroup,,,,,,
.1.3.6.1.4.1.4526.1.9.1.2.1.5.1,FSM7326-SWITCHING-MIB::agentSerialTimeout,Integer32,read-write,,current,,agentSerialTimeout specifies the maximum connect time(in minutes)  without console activity. A value of 0 indicates that a console can  be connected indefinitely. The time range is 0 to 160. 
.1.3.6.1.4.1.4526.1.9.1.2.1.5.2,FSM7326-SWITCHING-MIB::agentSerialBaudrate,INTEGER,read-write,,current,baud-1200(1):baud-2400(2):baud-4800(3):baud-9600(4):baud-19200(5):baud-38400(6):baud-57600(7):baud-115200(8), agentSerialBaudrate specifies the current baud rate at which  the serial port will try to connect. The available values  are 1200, 2400, 4800, 9600, 19200, 38400,57600, and 115200 baud. 
.1.3.6.1.4.1.4526.1.9.1.2.1.5.3,FSM7326-SWITCHING-MIB::agentSerialCharacterSize,Integer32,read-only,,current,,agentSerialCharacterSize specifies the number of bits in  a character. The number of bits is always 8.
.1.3.6.1.4.1.4526.1.9.1.2.1.5.4,FSM7326-SWITCHING-MIB::agentSerialHWFlowControlMode,INTEGER,read-only,,current,enable(1):disable(2),agentSerialHardwareFlowControl specifies whether hardware  flow-control is enabled or disabled. Hardware Flow Control is  always disabled.
.1.3.6.1.4.1.4526.1.9.1.2.1.5.5,FSM7326-SWITCHING-MIB::agentSerialStopBits,Integer32,read-only,,current,, agentSerialStopBits specifies the number of Stop bits per  character. The number of Stop bits is always 1.
.1.3.6.1.4.1.4526.1.9.1.2.1.5.6,FSM7326-SWITCHING-MIB::agentSerialParityType,INTEGER,read-only,,current,even(1):odd(2):none(3), agentSerialParityType specifies the Parity Method used on  the Serial Port. The Parity Method is always None. 
.1.3.6.1.4.1.4526.1.9.1.2.2,FSM7326-SWITCHING-MIB::agentLagConfigGroup,,,,,,
.1.3.6.1.4.1.4526.1.9.1.2.2.1,FSM7326-SWITCHING-MIB::agentLagConfigCreate,OCTET,read-write,,current,,Agent LAG Create. When this object is set with a non-empty string, a new LAG will be created  if possible with the entered string as its name.
.1.3.6.1.4.1.4526.1.9.1.2.2.2,FSM7326-SWITCHING-MIB::agentLagSummaryConfigTable,,not-accessible,,current,,A summary table of the switch's LAG config entries
.1.3.6.1.4.1.4526.1.9.1.2.2.2.1,FSM7326-SWITCHING-MIB::agentLagSummaryConfigEntry,,not-accessible,agentLagSummaryLagIndex,current,,Switch's LAG config entry
.1.3.6.1.4.1.4526.1.9.1.2.2.2.1.1,FSM7326-SWITCHING-MIB::agentLagSummaryLagIndex,Integer32,read-only,,current,,Agent LAG IfIndex.  This value corresponds with the LAG interface in the ifTable.
.1.3.6.1.4.1.4526.1.9.1.2.2.2.1.2,FSM7326-SWITCHING-MIB::agentLagSummaryName,OCTET,read-write,,current,,Agent LAG Name.  The associated name of the LAG used during creation.
.1.3.6.1.4.1.4526.1.9.1.2.2.2.1.3,FSM7326-SWITCHING-MIB::agentLagSummaryFlushTimer,Integer32,read-write,,obsolete,,Agent LAG FlushTimer.
.1.3.6.1.4.1.4526.1.9.1.2.2.2.1.4,FSM7326-SWITCHING-MIB::agentLagSummaryLinkTrap,INTEGER,read-write,,current,enable(1):disable(2),Agent LAG LinkTrap.  Configures sending Link Up/Down traps when the LAG interface goes Up or Down.
.1.3.6.1.4.1.4526.1.9.1.2.2.2.1.5,FSM7326-SWITCHING-MIB::agentLagSummaryAdminMode,INTEGER,read-write,,current,enable(1):disable(2),Agent LAG AdminMode.  Administratively enables or disables this LAG interface.
.1.3.6.1.4.1.4526.1.9.1.2.2.2.1.6,FSM7326-SWITCHING-MIB::agentLagSummaryStpMode,INTEGER,read-write,,current,dot1d(1):fast(2):off(3):dot1s(4),Agent LAG StpMode  If Dot1d is enabled, the valid values are: dot1d(1), fast(2), and off(3)  If Dot1s is enabled, the valid values are: off(3) and dot1s(4)
.1.3.6.1.4.1.4526.1.9.1.2.2.2.1.7,FSM7326-SWITCHING-MIB::agentLagSummaryAddPort,Integer32,read-write,,current,,Agent LAG AddPort.   Set to a non 0 value to add a port to the LAG. Values correspond to ifIndex values in the ifTable.  Note: agentPortType for the port to be added must be full duplex and the same speed as previously added port(s), if any.
.1.3.6.1.4.1.4526.1.9.1.2.2.2.1.8,FSM7326-SWITCHING-MIB::agentLagSummaryDeletePort,Integer32,read-write,,current,,Agent LAG DeletePort.  Set to a non 0 value to remove a port from the LAG. Values correspond to ifIndex values in the ifTable.
.1.3.6.1.4.1.4526.1.9.1.2.2.2.1.9,FSM7326-SWITCHING-MIB::agentLagSummaryStatus,INTEGER,read-write,,current,active(1):notInService(2):notReady(3):createAndGo(4):createAndWait(5):destroy(6),Agent LAG Status.  active(1) - This LAG is enabled. destroy(6) - Set to this value to remove the LAG.
.1.3.6.1.4.1.4526.1.9.1.2.2.2.1.10,FSM7326-SWITCHING-MIB::agentLagSummaryType,INTEGER,read-only,,current,static(1):dynamic(2),Agent LAG Type.  static(1) - This LAG is staticly maintained. dynamic(2) - This LAG is dynamicly maintained.
.1.3.6.1.4.1.4526.1.9.1.2.2.3,FSM7326-SWITCHING-MIB::agentLagDetailedConfigTable,,not-accessible,,current,,A detailed table of the switch's LAG config entries
.1.3.6.1.4.1.4526.1.9.1.2.2.3.1,FSM7326-SWITCHING-MIB::agentLagDetailedConfigEntry,,not-accessible,agentLagDetailedLagIndex:agentLagDetailedIfIndex,current,,Switch's LAG config entry
.1.3.6.1.4.1.4526.1.9.1.2.2.3.1.1,FSM7326-SWITCHING-MIB::agentLagDetailedLagIndex,Integer32,read-only,,current,,LAG index
.1.3.6.1.4.1.4526.1.9.1.2.2.3.1.2,FSM7326-SWITCHING-MIB::agentLagDetailedIfIndex,Integer32,read-only,,current,,LAG port index
.1.3.6.1.4.1.4526.1.9.1.2.2.3.1.3,FSM7326-SWITCHING-MIB::agentLagDetailedPortSpeed,OBJECT,read-only,,current,,LAG port speed. See agentPortType for a description and list of valid values.
.1.3.6.1.4.1.4526.1.9.1.2.2.3.1.4,FSM7326-SWITCHING-MIB::agentLagDetailedPortStatus,INTEGER,read-only,,current,active(1):inactive(2),LAG port status.  active(1) - Actively participating in the LAG. inactive(2) - Not participating in the LAG.
.1.3.6.1.4.1.4526.1.9.1.2.2.4,FSM7326-SWITCHING-MIB::agentLagConfigStaticCapability,INTEGER,read-write,,current,enable(1):disable(2),Agent LAG Static Capability. Configures whether Static LAGs are supported on this device.
.1.3.6.1.4.1.4526.1.9.1.2.3,FSM7326-SWITCHING-MIB::agentNetworkConfigGroup,,,,,,
.1.3.6.1.4.1.4526.1.9.1.2.3.1,FSM7326-SWITCHING-MIB::agentNetworkIPAddress,IpAddress,read-write,,current,,The switch's network ip address
.1.3.6.1.4.1.4526.1.9.1.2.3.2,FSM7326-SWITCHING-MIB::agentNetworkSubnetMask,IpAddress,read-write,,current,,The switch's network subnet mask
.1.3.6.1.4.1.4526.1.9.1.2.3.3,FSM7326-SWITCHING-MIB::agentNetworkDefaultGateway,IpAddress,read-write,,current,,The switch's network default gateway
.1.3.6.1.4.1.4526.1.9.1.2.3.4,FSM7326-SWITCHING-MIB::agentNetworkBurnedInMacAddress,OCTET,read-only,,current,,The switch's network Burned-In MAC address
.1.3.6.1.4.1.4526.1.9.1.2.3.5,FSM7326-SWITCHING-MIB::agentNetworkConfigProtocol,INTEGER,read-write,,current,none(1):bootp(2):dhcp(3),The switch's network config protocol
.1.3.6.1.4.1.4526.1.9.1.2.3.6,FSM7326-SWITCHING-MIB::agentNetworkWebMode,INTEGER,read-write,,current,enable(1):disable(2),The switch's network config protocol on next bootup
.1.3.6.1.4.1.4526.1.9.1.2.3.7,FSM7326-SWITCHING-MIB::agentNetworkJavaMode,INTEGER,read-write,,current,enable(1):disable(2),Configures the use of the Java interface through the Web.
.1.3.6.1.4.1.4526.1.9.1.2.3.8,FSM7326-SWITCHING-MIB::agentNetworkMgmtVlan,Integer32,read-write,,current,,The VLAN ID through which the switch can be managed using the  agentNetworkIPAddress
.1.3.6.1.4.1.4526.1.9.1.2.4,FSM7326-SWITCHING-MIB::agentServicePortConfigGroup,,,,,,
.1.3.6.1.4.1.4526.1.9.1.2.4.1,FSM7326-SWITCHING-MIB::agentServicePortIPAddress,IpAddress,read-write,,current,,The switch's ServicePort ip address
.1.3.6.1.4.1.4526.1.9.1.2.4.2,FSM7326-SWITCHING-MIB::agentServicePortSubnetMask,IpAddress,read-write,,current,,The switch's ServicePort subnet mask
.1.3.6.1.4.1.4526.1.9.1.2.4.3,FSM7326-SWITCHING-MIB::agentServicePortDefaultGateway,IpAddress,read-write,,current,,The switch's ServicePort default gateway
.1.3.6.1.4.1.4526.1.9.1.2.4.4,FSM7326-SWITCHING-MIB::agentServicePortBurnedInMacAddress,OCTET,read-only,,current,,The switch's ServicePort Burned-In MAC address
.1.3.6.1.4.1.4526.1.9.1.2.4.5,FSM7326-SWITCHING-MIB::agentServicePortConfigProtocol,INTEGER,read-write,,current,none(1):bootp(2):dhcp(3),The switch's ServicePort config protocol
.1.3.6.1.4.1.4526.1.9.1.2.6,FSM7326-SWITCHING-MIB::agentSnmpConfigGroup,,,,,,
.1.3.6.1.4.1.4526.1.9.1.2.6.1,FSM7326-SWITCHING-MIB::agentSnmpCommunityCreate,OCTET,read-write,,current,,Creates a new SNMP Community entry. Defaults: IPAddress 0.0.0.0 IpMask 0.0.0.0 AccessMode read-only Status config
.1.3.6.1.4.1.4526.1.9.1.2.6.2,FSM7326-SWITCHING-MIB::agentSnmpCommunityConfigTable,,not-accessible,,current,,A table of the switch's SNMP Config entries
.1.3.6.1.4.1.4526.1.9.1.2.6.2.1,FSM7326-SWITCHING-MIB::agentSnmpCommunityConfigEntry,,not-accessible,agentSnmpCommunityIndex,current,,Switch's SNMP Config entry
.1.3.6.1.4.1.4526.1.9.1.2.6.2.1.1,FSM7326-SWITCHING-MIB::agentSnmpCommunityIndex,Integer32,read-only,,current,,The switch's Snmp Community Index
.1.3.6.1.4.1.4526.1.9.1.2.6.2.1.2,FSM7326-SWITCHING-MIB::agentSnmpCommunityName,OCTET,read-write,,current,,The switch's Snmp Community Name This name identifies each SNMP community;  the name can be up to 16 characters, and it is case-sensitive. Community names in the SNMP community must be unique.  If you make multiple entries using the same community name,  the first entry is kept and processed and all duplicate entries are ignored.  
.1.3.6.1.4.1.4526.1.9.1.2.6.2.1.3,FSM7326-SWITCHING-MIB::agentSnmpCommunityIPAddress,IpAddress,read-write,,current,,The switch's Snmp Community IP Address Client IP Address - This attribute is an IP address (or portion thereof)  from which this device will accept SNMP packets with the associated  community. The requesting entity's IP address is logical-ANDed with  the Client IP Mask and the result must match the Client IP Address.  Note: If the Client IP Mask is set  to 0.0.0.0, a Client IP Address of 0.0.0.0 matches all IP addresses.  
.1.3.6.1.4.1.4526.1.9.1.2.6.2.1.4,FSM7326-SWITCHING-MIB::agentSnmpCommunityIPMask,IpAddress,read-write,,current,,The switch's Snmp Community IP Mask Client IP Mask - This attribute is a mask to be logical-ANDed with the requesting entity's IP address before comparison with the Client IP Address.  If the result matches with Client IP Address then the address is an  authenticated IP address. For example, if the Client IP Address  is 9.47.128.0 and the corresponding Client IP Mask is 255.255.255.0,  a range of incoming IP addresses would match, that is, the incoming IP  addresses could be a value in the following range: 9.47.128.0 to 9.47.128.255. To have a specific IP address be the only authenticated IP address, set the  Client IP Address to the required IP address and set the Client IP Mask  to 255.255.255.255.  
.1.3.6.1.4.1.4526.1.9.1.2.6.2.1.5,FSM7326-SWITCHING-MIB::agentSnmpCommunityAccessMode,INTEGER,read-write,,current,,The switch's Snmp Community Access Mode Access Mode - This value can be read-only or read/write.  A community with a read-only access allows for switch information to be displayed. A community with a read/write access allows for configuration  changes to be made and for information to be displayed. 
.1.3.6.1.4.1.4526.1.9.1.2.6.2.1.6,FSM7326-SWITCHING-MIB::agentSnmpCommunityStatus,INTEGER,read-write,,current,active(1):notInService(2):config(3):destroy(4),The switch's Snmp Community Status.  active(1) - This community is active, allowing SNMP managers associated  with this community to manage the switch according to its  access right.   notInService(2) - This community is not active; no SNMP requests using this  community will be accepted. In this case the SNMP manager  associated with this community cannot manage the switch until  the Status is changed back to active(1).  config(3) - The community Status must be set to this value in order to  configure it. When creating a new community entry, initial  Status will be set to this value.  destroy(4) - Set to this value to remove the community from the agent.
.1.3.6.1.4.1.4526.1.9.1.2.6.3,FSM7326-SWITCHING-MIB::agentSnmpTrapReceiverCreate,OCTET,read-write,,current,,Creates a new trap receiver entry.  Defaults: IPAddress 0.0.0.0 status config
.1.3.6.1.4.1.4526.1.9.1.2.6.4,FSM7326-SWITCHING-MIB::agentSnmpTrapReceiverConfigTable,,not-accessible,,current,,Trap messages are sent across a network to an SNMP Network Manager.  These messages alert the manager to events occurring within the switch  or on the network. Up to six simultaneous trap receivers are supported.  
.1.3.6.1.4.1.4526.1.9.1.2.6.4.1,FSM7326-SWITCHING-MIB::agentSnmpTrapReceiverConfigEntry,,not-accessible,agentSnmpTrapReceiverIndex,current,,Switch's Snmp Trace Receiver Config entry
.1.3.6.1.4.1.4526.1.9.1.2.6.4.1.1,FSM7326-SWITCHING-MIB::agentSnmpTrapReceiverIndex,Integer32,read-only,,current,,The switch's Snmp Trap Receiver Index
.1.3.6.1.4.1.4526.1.9.1.2.6.4.1.2,FSM7326-SWITCHING-MIB::agentSnmpTrapReceiverCommunityName,OCTET,read-write,,current,,The switch's Snmp Trap Receiver Community Name. This is the SNMP community name of the remote network manager;  the name can be up to 16 characters, and is case-sensitive.  
.1.3.6.1.4.1.4526.1.9.1.2.6.4.1.3,FSM7326-SWITCHING-MIB::agentSnmpTrapReceiverIPAddress,IpAddress,read-write,,current,,IP Address - Each IP address parameter is four integer numbers.  The numbers range from 0 to 255.  
.1.3.6.1.4.1.4526.1.9.1.2.6.4.1.4,FSM7326-SWITCHING-MIB::agentSnmpTrapReceiverStatus,INTEGER,read-write,,current,active(1):notInService(2):config(3):destroy(4),The switch's Snmp Trap Reciever Status. active(1) - This trap receiver is active, allowing SNMP Traps to  be sent to this receiver.   notInService(2) - This trap reciever is not active; no SNMP Traps will  be sent to this reciever until it's set back to active(1).   config(3) - The trap reciever Status must be set to this value in order  to configure it. When creating a new trap receiver entry,  the Status will initially be set to this value. Note: agentSnmpTrapReceiverIPAddress must be set to non-zero before changing to active(1) or notInService(2).  destroy(4) - Set to this value to remove the trap receiver entry from  the agent.
.1.3.6.1.4.1.4526.1.9.1.2.6.5,FSM7326-SWITCHING-MIB::agentSnmpTrapFlagsConfigGroup,,,,,,
.1.3.6.1.4.1.4526.1.9.1.2.6.5.1,FSM7326-SWITCHING-MIB::agentSnmpAuthenticationTrapFlag,INTEGER,read-write,,current,enable(1):disable(2),Authentication Flag - Enable/Disable authentication Flag.
.1.3.6.1.4.1.4526.1.9.1.2.6.5.2,FSM7326-SWITCHING-MIB::agentSnmpLinkUpDownTrapFlag,INTEGER,read-write,,current,enable(1):disable(2),Link Up/Down Flag - Enable/Disable Link Up/Link Down traps for the  entire switch. When set to Enable, the Link Up/Down traps will be  sent only if the Link Trap flag setting associated with the port  (Port Configuration Menu) is set to Enable. 
.1.3.6.1.4.1.4526.1.9.1.2.6.5.3,FSM7326-SWITCHING-MIB::agentSnmpMultipleUsersTrapFlag,INTEGER,read-write,,current,enable(1):disable(2),Multiple Users Flag - Enable/Disable Multiple User traps. When the value is set to Enable, a Multiple User Trap is sent whenever someone logs in  to the terminal interface (EIA 232 or Telnet) and there is already an  existing terminal interface session. 
.1.3.6.1.4.1.4526.1.9.1.2.6.5.4,FSM7326-SWITCHING-MIB::agentSnmpSpanningTreeTrapFlag,INTEGER,read-write,,current,enable(1):disable(2),Spanning Tree Flag - This flag enables the sending of new root traps and  topology change notification traps.
.1.3.6.1.4.1.4526.1.9.1.2.6.5.5,FSM7326-SWITCHING-MIB::agentSnmpBroadcastStormTrapFlag,INTEGER,read-write,,current,enable(1):disable(2),Broadcast Storm Flag - This flag enables or disables the broadcast  storm trap. You must also enable Broadcast Storm Recovery Mode  (see the Switch Configuration Menu). When this  value is set to Enable and Broadcast Storm Recovery mode is set to Enable,  the Broadcast Storm Start/End traps are sent when the switch enters and  leaves Broadcast Storm Recovery. 
.1.3.6.1.4.1.4526.1.9.1.2.7,FSM7326-SWITCHING-MIB::agentSpanningTreeConfigGroup,,,,,,
.1.3.6.1.4.1.4526.1.9.1.2.7.1,FSM7326-SWITCHING-MIB::agentSpanningTreeMode,INTEGER,read-write,,current,enable(1):disable(2),The switch's Spanning Tree Switch Status
.1.3.6.1.4.1.4526.1.9.1.2.8,FSM7326-SWITCHING-MIB::agentSwitchConfigGroup,,,,,,
.1.3.6.1.4.1.4526.1.9.1.2.8.2,FSM7326-SWITCHING-MIB::agentSwitchBroadcastControlMode,INTEGER,read-write,,current,enable(1):disable(2),The switch config broadcast allows you to enable or disable  broadcast storm recovery mode. When you specify Enable for Broadcast  Storm Recovery and the broadcast traffic on any Ethernet port exceeds  20 percent of the link speed, the switch blocks (discards) the broadcast  traffic until the broadcast traffic returns to 10 percent or less. Upper limit for 10M link is 20% and lower limit is 10%.  For 100M link Upper limit is 5% and lower limit is 2%
.1.3.6.1.4.1.4526.1.9.1.2.8.3,FSM7326-SWITCHING-MIB::agentSwitchDot3FlowControlMode,INTEGER,read-write,,current,enable(1):disable(2),Config switchconfig flowcontrol allows you to enable or disable  802.3x flow control for the switch. This value  applies to only full-duplex mode ports. 
.1.3.6.1.4.1.4526.1.9.1.2.8.4,FSM7326-SWITCHING-MIB::agentSwitchAddressAgingTimeoutTable,,not-accessible,,current,,The switch's address aging timeout table
.1.3.6.1.4.1.4526.1.9.1.2.8.4.1,FSM7326-SWITCHING-MIB::agentSwitchAddressAgingTimeoutEntry,,not-accessible,dot1qFdbId,current,,Aging information about a specific Filtering Database.
.1.3.6.1.4.1.4526.1.9.1.2.8.4.1.1,FSM7326-SWITCHING-MIB::agentSwitchAddressAgingTimeout,Integer32,read-write,,current,,The FDB entry's address aging timeout (in seconds)
.1.3.6.1.4.1.4526.1.9.1.2.8.6,FSM7326-SWITCHING-MIB::agentSwitchIGMPSnoopingGroup,,,,,,
.1.3.6.1.4.1.4526.1.9.1.2.8.6.1,FSM7326-SWITCHING-MIB::agentSwitchIGMPSnoopingAdminMode,INTEGER,read-write,,current,enable(1):disable(2),This enables or disables IGMP Snooping on the system. 
.1.3.6.1.4.1.4526.1.9.1.2.8.6.2,FSM7326-SWITCHING-MIB::agentSwitchIGMPSnoopingGroupMembershipInterval,Integer32,read-write,,current,,The amount of time in seconds a switch will wait for a report for a particular group on a particular interface before it deletes the interface from the entry. 
.1.3.6.1.4.1.4526.1.9.1.2.8.6.3,FSM7326-SWITCHING-MIB::agentSwitchIGMPSnoopingMaxResponseTime,Integer32,read-write,,current,,The amount of time in seconds a switch will wait after sending  a query on an interface because it did not receive a report for  a particular group in that interface. This value must be less  than agentSwitchIGMPSnoopingQueryInterval.
.1.3.6.1.4.1.4526.1.9.1.2.8.6.4,FSM7326-SWITCHING-MIB::agentSwitchIGMPSnoopingMRPExpirationTime,Integer32,read-write,,current,,Multicast Router Present Expiration Time. The amount of time in seconds a switch will wait for a query to be received on an interface before the interface is removed from the list of interfaces with mutlticast routers attached. A value of zero indicates an infinite timeout, i.e. the entries in the list will not expire.
.1.3.6.1.4.1.4526.1.9.1.2.8.6.5,FSM7326-SWITCHING-MIB::agentSwitchIGMPSnoopingPortMask,OCTET,read-write,,current,,IGMP Snooping Port Mask.  This allows configuration of IGMP Snooping on selected ports.  IGMP Snooping cannot be enabled on an interface that has routing enabled, or is a member of a LAG. If a port which has IGMP Snooping  enabled becomes enabled for routing, or is enlisted as a member of a  LAG, IGMP Snooping functionality will be disabled on that port. IGMP Snooping functionality will be subsequently be reenabled if routing is disabled or LAG membership is removed from an interface that had previously had IGMP Snooping enabled.  To obtain port numbers from interface numbers, use the objects agentPortDot1dBasePort and agentPortIfIndex in the agentPortConfigTable  table.
.1.3.6.1.4.1.4526.1.9.1.2.8.6.6,FSM7326-SWITCHING-MIB::agentSwitchIGMPSnoopingMulticastControlFramesProcessed,Counter32,read-only,,current,,Multicast Control Frames Processed by CPU. The number of multicast control frames that have been processed by the CPU.
.1.3.6.1.4.1.4526.1.9.1.2.8.7,FSM7326-SWITCHING-MIB::agentSwitchMFDBGroup,,,,,,
.1.3.6.1.4.1.4526.1.9.1.2.8.7.1,FSM7326-SWITCHING-MIB::agentSwitchMFDBTable,,not-accessible,,current,,The Multicast Forwarding Database table
.1.3.6.1.4.1.4526.1.9.1.2.8.7.1.1,FSM7326-SWITCHING-MIB::agentSwitchMFDBEntry,,not-accessible,agentSwitchMFDBVlanId:agentSwitchMFDBMacAddress:agentSwitchMFDBProtocolType,current,,Contains Forwarding and Filtering information per Vlan Index, MAC Address, and  Component User.
.1.3.6.1.4.1.4526.1.9.1.2.8.7.1.1.1,FSM7326-SWITCHING-MIB::agentSwitchMFDBVlanId,Unsigned32,read-only,,current,,Vlan Index for which this entry is associated with.
.1.3.6.1.4.1.4526.1.9.1.2.8.7.1.1.2,FSM7326-SWITCHING-MIB::agentSwitchMFDBMacAddress,OCTET,read-only,,current,,A multicast MAC address for which the switch has forwarding and or  filtering information.
.1.3.6.1.4.1.4526.1.9.1.2.8.7.1.1.3,FSM7326-SWITCHING-MIB::agentSwitchMFDBProtocolType,INTEGER,read-only,,current,static(1):gmrp(2):igmp(3),The component that is responsible for this entry in the Multicast  Forwarding Database.
.1.3.6.1.4.1.4526.1.9.1.2.8.7.1.1.4,FSM7326-SWITCHING-MIB::agentSwitchMFDBType,INTEGER,read-only,,current,static(1):dynamic(2),This displays the type of the entry.   static(1) - Entries configured by the end user dynamic(2) - Entries added as a result of a learning process or protocol
.1.3.6.1.4.1.4526.1.9.1.2.8.7.1.1.5,FSM7326-SWITCHING-MIB::agentSwitchMFDBDescription,OCTET,read-only,,current,,Text description of this multicast table entry.
.1.3.6.1.4.1.4526.1.9.1.2.8.7.1.1.6,FSM7326-SWITCHING-MIB::agentSwitchMFDBForwardingPortMask,OCTET,read-only,,current,,BitMask indicating which ports this entry indicates should be forwarded.  To obtain port numbers from interface numbers, use the objects agentPortDot1dBasePort and agentPortIfIndex in the agentPortConfigTable  table.
.1.3.6.1.4.1.4526.1.9.1.2.8.7.1.1.7,FSM7326-SWITCHING-MIB::agentSwitchMFDBFilteringPortMask,OCTET,read-only,,current,,BitMask indicating which ports this entry indicates should be filtered.  To obtain port numbers from interface numbers, use the objects agentPortDot1dBasePort and agentPortIfIndex in the agentPortConfigTable  table.
.1.3.6.1.4.1.4526.1.9.1.2.8.7.2,FSM7326-SWITCHING-MIB::agentSwitchMFDBSummaryTable,,not-accessible,,current,,The Multicast Forwarding Database Summary table
.1.3.6.1.4.1.4526.1.9.1.2.8.7.2.1,FSM7326-SWITCHING-MIB::agentSwitchMFDBSummaryEntry,,not-accessible,agentSwitchMFDBSummaryVlanId:agentSwitchMFDBSummaryMacAddress,current,,Summarizes the forwarding ports for all components registered for all MFDB table entries with the same Vlan Index and MAC Address.
.1.3.6.1.4.1.4526.1.9.1.2.8.7.2.1.1,FSM7326-SWITCHING-MIB::agentSwitchMFDBSummaryVlanId,Unsigned32,read-only,,current,,Vlan Index for which this entry is associated with.
.1.3.6.1.4.1.4526.1.9.1.2.8.7.2.1.2,FSM7326-SWITCHING-MIB::agentSwitchMFDBSummaryMacAddress,OCTET,read-only,,current,,A multicast MAC address for which the switch has forwarding and or  filtering information.
.1.3.6.1.4.1.4526.1.9.1.2.8.7.2.1.3,FSM7326-SWITCHING-MIB::agentSwitchMFDBSummaryForwardingPortMask,OCTET,read-only,,current,,Port Mask indicating which ports this entry indicates should be forwarded.  To obtain port numbers from interface numbers, use the objects agentPortDot1dBasePort and agentPortIfIndex in the agentPortConfigTable  table.
.1.3.6.1.4.1.4526.1.9.1.2.8.7.3,FSM7326-SWITCHING-MIB::agentSwitchMFDBMaxTableEntries,Gauge32,read-only,,current,,This displays the maximum number of entries that can possibly be in  the Multicast Forwarding Database table.
.1.3.6.1.4.1.4526.1.9.1.2.8.7.4,FSM7326-SWITCHING-MIB::agentSwitchMFDBMostEntriesUsed,Gauge32,read-only,,current,,This displays the largest number of entries that have been present  in the Multicast Forwarding Database table. This value is also known  as the MFDB high-water mark.
.1.3.6.1.4.1.4526.1.9.1.2.8.7.5,FSM7326-SWITCHING-MIB::agentSwitchMFDBCurrentEntries,Gauge32,read-only,,current,,This displays the current number of entries in the Multicast  Forwarding Database table.
.1.3.6.1.4.1.4526.1.9.1.2.9,FSM7326-SWITCHING-MIB::agentTransferConfigGroup,,,,,,
.1.3.6.1.4.1.4526.1.9.1.2.9.1,FSM7326-SWITCHING-MIB::agentTransferUploadGroup,,,,,,
.1.3.6.1.4.1.4526.1.9.1.2.9.1.1,FSM7326-SWITCHING-MIB::agentTransferUploadMode,INTEGER,read-write,,current,tftp(1):xmodem(2):ymodem(3):zmodem(4),Transfer upload mode configures the mode to use when uploading from the  switch. The mode is either X/Y/ZMODEM or TFTP. X/Y/ZMODEM is valid only when the  file transfer is initiated by the serial EIA 232 port.  
.1.3.6.1.4.1.4526.1.9.1.2.9.1.2,FSM7326-SWITCHING-MIB::agentTransferUploadServerIP,IpAddress,read-write,,current,,Transfer upload tftpserverip configures the IP address of the server  where the file is located. It is valid only when the Transfer Mode is  TFTP. The address is 4 integer bytes ranging from 0 to 255.
.1.3.6.1.4.1.4526.1.9.1.2.9.1.3,FSM7326-SWITCHING-MIB::agentTransferUploadPath,OCTET,read-write,,current,,Transfer upload tftppath configures the directory path where the file is to be uploaded to. The switch remembers the last file path used.  
.1.3.6.1.4.1.4526.1.9.1.2.9.1.4,FSM7326-SWITCHING-MIB::agentTransferUploadFilename,OCTET,read-write,,current,,Transfer upload tftpfilename configures the file name for the file being  uploaded from the switch. It can be up to 32 alphanumeric characters.  The switch remembers the last file name used.  File path can be appended to the file name if the string is less than 17  characters. Otherwise, the File Path field will need to be used and the  File Name will be appended to the File Path as is. An example would be  File Path set to c:\tftp\code\ and File Name set to e1r1v1.opr.  Note: File Name, File Path, and TFTP Server IP Address are applicable  only if the Transfer Mode is TFTP.
.1.3.6.1.4.1.4526.1.9.1.2.9.1.5,FSM7326-SWITCHING-MIB::agentTransferUploadDataType,INTEGER,read-write,,current,config(2):errorlog(3):messagelog(4):traplog(5),Transfer upload datatype configures the type of file to upload from the  switch.  The types for upload are: - Configuration File - Error log - Message log - Trap log 
.1.3.6.1.4.1.4526.1.9.1.2.9.1.6,FSM7326-SWITCHING-MIB::agentTransferUploadStart,INTEGER,read-write,,current,enable(1):disable(2),Transfer upload start will start an upload transfer.  The agentTransferUploadMode object must not be set to xmodem(2),
.1.3.6.1.4.1.4526.1.9.1.2.9.1.7,FSM7326-SWITCHING-MIB::agentTransferUploadStatus,INTEGER,read-only,,current,notInitiated(1):transferStarting(2):errorStarting(3):wrongFileType(4):updatingConfig(5):invalidConfigFile(6):writingToFlash(7):failureWritingToFlash(8):checkingCRC(9):failedCRC(10):unknownDirection(11):transferSuccessful(12):transferFailed(13),Indicates the current status of an upload transfer.
.1.3.6.1.4.1.4526.1.9.1.2.9.2,FSM7326-SWITCHING-MIB::agentTransferDownloadGroup,,,,,,
.1.3.6.1.4.1.4526.1.9.1.2.9.2.1,FSM7326-SWITCHING-MIB::agentTransferDownloadMode,INTEGER,read-write,,current,tftp(1):xmodem(2):ymodem(3):zmodem(4),Transfer download mode configures the mode to use when downloading  to the switch. The mode is either X/Y/ZMODEM or TFTP. X/Y/ZMODEM is valid only  when the file transfer is initiated by the serial EIA 232 port.  
.1.3.6.1.4.1.4526.1.9.1.2.9.2.2,FSM7326-SWITCHING-MIB::agentTransferDownloadServerIP,IpAddress,read-write,,current,,Transfer download tftpserverip configures the IP address of the server  where the file is located. It is valid only when the Transfer Mode is TFTP.  The address is 4 integer bytes ranging from 0 to 255.  
.1.3.6.1.4.1.4526.1.9.1.2.9.2.3,FSM7326-SWITCHING-MIB::agentTransferDownloadPath,OCTET,read-write,,current,,Transfer download tftppath configures the directory path where the  file is located. The switch remembers the last file path used.  
.1.3.6.1.4.1.4526.1.9.1.2.9.2.4,FSM7326-SWITCHING-MIB::agentTransferDownloadFilename,OCTET,read-write,,current,,Transfer download tftpfilename configures the file name for the file  being downloaded to the switch. It can be up to 32 alphanumeric characters.  The switch remembers the last file name used.  File path can be appended to the file name if the string is less than 33  characters. Otherwise, the File Path field will need to be used and the  File Name will be appended to the File Path as is. An example would be  File Path set to c:\tftp\code\ and File Name set to e1r1v1.opr.  Note: File Name, File Path, and TFTP Server IP Address are applicable  only if the Transfer Mode is TFTP.
.1.3.6.1.4.1.4526.1.9.1.2.9.2.5,FSM7326-SWITCHING-MIB::agentTransferDownloadDataType,INTEGER,read-write,,current,code(2):config(3):sshkey-rsa1(4):sshkey-rsa2(5):sshkey-dsa(6):sslpem-root(7):sslpem-server(8):sslpem-dhweak(9):sslpem-dhstrong(10),Transfer download datatype configures the type of file to download to  the switch.  The types for download are:  code - Code File config - Configuration File sshkey-rsa1 - SSH-1 RSA Key File sshkey-rsa2 - SSH-2 RSA Key PEM File sshkey-dsa - SSH-2 DSA Key PEM File sslpem-root - SSL Trusted Root Certificate PEM File sslpem-server - SSL Server Certificate PEM File sslpem-dhweak - SSL DH Weak Encryption Parameter PEM File sslpem-dhstrong - SSL DH Strong Encryption Parameter PEM File  Note: SSH Key files can only be downloaded if SSH Server is administratively  disabled, and there are no active SSH sessions. 
.1.3.6.1.4.1.4526.1.9.1.2.9.2.6,FSM7326-SWITCHING-MIB::agentTransferDownloadStart,INTEGER,read-write,,current,enable(1):disable(2),Transfer download start will start an download transfer.  The agentTransferDownloadMode object must not be set to xmodem(2),
.1.3.6.1.4.1.4526.1.9.1.2.9.2.7,FSM7326-SWITCHING-MIB::agentTransferDownloadStatus,INTEGER,read-only,,current,notInitiated(1):transferStarting(2):errorStarting(3):wrongFileType(4):updatingConfig(5):invalidConfigFile(6):writingToFlash(7):failureWritingToFlash(8):checkingCRC(9):failedCRC(10):unknownDirection(11):transferSuccessful(12):transferFailed(13),Indicates the current status of an download transfer.
.1.3.6.1.4.1.4526.1.9.1.2.10,FSM7326-SWITCHING-MIB::agentPortMirroringGroup,,,,,,
.1.3.6.1.4.1.4526.1.9.1.2.10.1,FSM7326-SWITCHING-MIB::agentMirroredPortIfIndex,Integer32,read-write,,current,,IfIndex of the mirrored port
.1.3.6.1.4.1.4526.1.9.1.2.10.2,FSM7326-SWITCHING-MIB::agentProbePortIfIndex,Integer32,read-write,,current,,IfIndex of the probe port
.1.3.6.1.4.1.4526.1.9.1.2.10.3,FSM7326-SWITCHING-MIB::agentPortMirroringMode,INTEGER,read-write,,current,enable(1):disable(2):delete(3),Port mirroring mode:  enable - enable mirroring mode disable - disable mirroring mode delete - clear MirroredPort and Probe Port configuration
.1.3.6.1.4.1.4526.1.9.1.2.12,FSM7326-SWITCHING-MIB::agentDot3adAggPortTable,,not-accessible,,current,,This table provides 802.3ad link aggregation information for each physical port that is not available through the standard MIB.
.1.3.6.1.4.1.4526.1.9.1.2.12.1,FSM7326-SWITCHING-MIB::agentDot3adAggPortEntry,,not-accessible,agentDot3adAggPort,current,,Information about a table entry. The agentDot3adAggPort identifies the external interface number of the port.
.1.3.6.1.4.1.4526.1.9.1.2.12.1.1,FSM7326-SWITCHING-MIB::agentDot3adAggPort,Integer32,read-only,,current,,ifIndex of this physical port
.1.3.6.1.4.1.4526.1.9.1.2.12.1.2,FSM7326-SWITCHING-MIB::agentDot3adAggPortLACPMode,INTEGER,read-write,,current,enable(1):disable(2),Enable/disable 802.3ad LACP on this port
.1.3.6.1.4.1.4526.1.9.1.2.13,FSM7326-SWITCHING-MIB::agentPortConfigTable,,not-accessible,,current,,A table of the switch's physical port config entries
.1.3.6.1.4.1.4526.1.9.1.2.13.1,FSM7326-SWITCHING-MIB::agentPortConfigEntry,,not-accessible,agentPortDot1dBasePort,current,,Switch's physical port config entry
.1.3.6.1.4.1.4526.1.9.1.2.13.1.1,FSM7326-SWITCHING-MIB::agentPortDot1dBasePort,Integer32,read-only,,current,,The port number of this port.
.1.3.6.1.4.1.4526.1.9.1.2.13.1.2,FSM7326-SWITCHING-MIB::agentPortIfIndex,Integer32,read-only,,current,,The switch's Port IfIndex
.1.3.6.1.4.1.4526.1.9.1.2.13.1.3,FSM7326-SWITCHING-MIB::agentPortIanaType,INTEGER,read-only,,current,other(1):regular1822(2):hdh1822(3):ddnX25(4):rfc877x25(5):ethernetCsmacd(6):iso88023Csmacd(7):iso88024TokenBus(8):iso88025TokenRing(9):iso88026Man(10):starLan(11):proteon10Mbit(12):proteon80Mbit(13):hyperchannel(14):fddi(15):lapb(16):sdlc(17):ds1(18):e1(19):basicISDN(20):primaryISDN(21):propPointToPointSerial(22):ppp(23):softwareLoopback(24):eon(25):ethernet3Mbit(26):nsip(27):slip(28):ultra(29):ds3(30):sip(31):frameRelay(32):rs232(33):para(34):arcnet(35):arcnetPlus(36):atm(37):miox25(38):sonet(39):x25ple(40):iso88022llc(41):localTalk(42):smdsDxi(43):frameRelayService(44):v35(45):hssi(46):hippi(47):modem(48):aal5(49):sonetPath(50):sonetVT(51):smdsIcip(52):propVirtual(53):propMultiplexor(54):ieee80212(55):fibreChannel(56):hippiInterface(57):frameRelayInterconnect(58):aflane8023(59):aflane8025(60):cctEmul(61):fastEther(62):isdn(63):v11(64):v36(65):g703at64k(66):g703at2mb(67):qllc(68):fastEtherFX(69):channel(70):ieee80211(71):ibm370parChan(72):escon(73):dlsw(74):isdns(75):isdnu(76):lapd(77):ipSwitch(78):rsrb(79):atmLogical(80):ds0(81):ds0Bundle(82):bsc(83):async(84):cnr(85):iso88025Dtr(86):eplrs(87):arap(88):propCnls(89):hostPad(90):termPad(91):frameRelayMPI(92):x213(93):adsl(94):radsl(95):sdsl(96):vdsl(97):iso88025CRFPInt(98):myrinet(99):voiceEM(100):voiceFXO(101):voiceFXS(102):voiceEncap(103):voiceOverIp(104):atmDxi(105):atmFuni(106):atmIma(107):pppMultilinkBundle(108):ipOverCdlc(109):ipOverClaw(110):stackToStack(111):virtualIpAddress(112):mpc(113):ipOverAtm(114):iso88025Fiber(115):tdlc(116):gigabitEthernet(117):hdlc(118):lapf(119):v37(120):x25mlp(121):x25huntGroup(122):transpHdlc(123):interleave(124):fast(125):ip(126):docsCableMaclayer(127):docsCableDownstream(128):docsCableUpstream(129):a12MppSwitch(130):tunnel(131):coffee(132):ces(133):atmSubInterface(134):l2vlan(135):l3ipvlan(136):l3ipxvlan(137):digitalPowerline(138):mediaMailOverIp(139):dtm(140):dcn(141):ipForward(142):msdsl(143):ieee1394(144):if-gsn(145):dvbRccMacLayer(146):dvbRccDownstream(147):dvbRccUpstream(148):atmVirtual(149):mplsTunnel(150):srp(151):voiceOverAtm(152):voiceOverFrameRelay(153):idsl(154):compositeLink(155):ss7SigLink(156):propWirelessP2P(157):frForward(158):rfc1483(159):usb(160):ieee8023adLag(161):bgppolicyaccounting(162):frf16MfrBundle(163):h323Gatekeeper(164):h323Proxy(165):mpls(166):mfSigLink(167):hdsl2(168):shdsl(169):ds1FDL(170):pos(171):dvbAsiIn(172):dvbAsiOut(173):plc(174):nfas(175):tr008(176):gr303RDT(177):gr303IDT(178):isup(179):propDocsWirelessMaclayer(180):propDocsWirelessDownstream(181):propDocsWirelessUpstream(182):hiperlan2(183):propBWAp2Mp(184):sonetOverheadChannel(185):digitalWrapperOverheadChannel(186):aal2(187):radioMAC(188):atmRadio(189):imt(190):mvl(191):reachDSL(192):frDlciEndPt(193):atmVciEndPt(194):opticalChannel(195):opticalTransport(196):propAtm(197):voiceOverCable(198):infiniband(199):teLink(200):q2931(201):virtualTg(202):sipTg(203):sipSig(204):docsCableUpstreamChannel(205):econet(206):pon155(207):pon622(208):bridge(209):linegroup(210):voiceEMFGD(211):voiceFGDEANA(212):voiceDID(213):mpegTransport(214):sixToFour(215):gtp(216):pdnEtherLoop1(217):pdnEtherLoop2(218):opticalChannelGroup(219):homepna(220):gfp(221):ciscoISLvlan(222):actelisMetaLOOP(223):fcipLink(224):rpr(225):qam(226):lmp(227):cblVectaStar(228):docsCableMCmtsDownstream(229):adsl2(230):macSecControlledIF(231):macSecUncontrolledIF(232):aviciOpticalEther(233):atmbond(234):voiceFGDOS(235):mocaVersion1(236):ieee80216WMAN(237):adsl2plus(238):dvbRcsMacLayer(239):dvbTdm(240):dvbRcsTdma(241):x86Laps(242):wwanPP(243):wwanPP2(244):voiceEBS(245):ifPwType(246):ilan(247):pip(248):aluELP(249):gpon(250):vdsl2(251):capwapDot11Profile(252):capwapDot11Bss(253):capwapWtpVirtualRadio(254):bits(255):docsCableUpstreamRfPort(256):cableDownstreamRfPort(257):vmwareVirtualNic(258):ieee802154(259):otnOdu(260):otnOtu(261):ifVfiType(262):g9981(263):g9982(264):g9983(265):aluEpon(266):aluEponOnu(267):aluEponPhysicalUni(268):aluEponLogicalLink(269):aluGponOnu(270):aluGponPhysicalUni(271):vmwareNicTeam(272):docsOfdmDownstream(277):docsOfdmaUpstream(278):gfast(279):sdci(280):xboxWireless(281):fastdsl(282):docsCableScte55d1FwdOob(283):docsCableScte55d1RetOob(284):docsCableScte55d2DsOob(285):docsCableScte55d2UsOob(286):docsCableNdf(287):docsCableNdr(288):ptm(289):ghn(290):otnOtsi(291):otnOtuc(292):otnOduc(293):otnOtsig(294):microwaveCarrierTermination(295):microwaveRadioLinkTerminal(296),The switch's Port Type
.1.3.6.1.4.1.4526.1.9.1.2.13.1.4,FSM7326-SWITCHING-MIB::agentPortSTPMode,INTEGER,read-write,,current,dot1d(1):fast(2):off(3),The switch's Port Spanning Tree Protocol Mode STP mode values are:   dot1d (the default)  fast, indicates you want to use the fast spanning tree mode off, indicates the STP mode is turned off for a particular port This object is only supported when the Dot1d Protocol is enabled.
.1.3.6.1.4.1.4526.1.9.1.2.13.1.5,FSM7326-SWITCHING-MIB::agentPortSTPState,INTEGER,read-only,,current,blocking(1):listening(2):learning(3):forwarding(4):disabled(5),The switch's Port Spanning Tree Protocol State. This object is only supported when the Dot1d Protocol is enabled.
.1.3.6.1.4.1.4526.1.9.1.2.13.1.6,FSM7326-SWITCHING-MIB::agentPortAdminMode,INTEGER,read-write,,current,enable(1):disable(2),The switch's Port Admin Mode
.1.3.6.1.4.1.4526.1.9.1.2.13.1.7,FSM7326-SWITCHING-MIB::agentPortPhysicalMode,INTEGER,read-write,,obsolete,auto-negotiate(1):half-10(2):full-10(3):half-100(4):full-100(5):half-100fx(6):full-100fx(7):full-1000sx(8),The switch's Port Speed Mode. This is the configured physical mode. This object is read-only for gigabit ports
.1.3.6.1.4.1.4526.1.9.1.2.13.1.8,FSM7326-SWITCHING-MIB::agentPortPhysicalStatus,INTEGER,read-only,,obsolete,auto-negotiate(1):half-10(2):full-10(3):half-100(4):full-100(5):half-100fx(6):full-100fx(7):full-1000sx(8),The switch's Port Physical Speed Status. This is the current actual speed.
.1.3.6.1.4.1.4526.1.9.1.2.13.1.9,FSM7326-SWITCHING-MIB::agentPortLinkTrapMode,INTEGER,read-write,,current,enable(1):disable(2),If enabled, link up and link down traps will be sent for this port.
.1.3.6.1.4.1.4526.1.9.1.2.13.1.10,FSM7326-SWITCHING-MIB::agentPortClearStats,INTEGER,read-write,,current,enable(1):disable(2),clear stats for this port only
.1.3.6.1.4.1.4526.1.9.1.2.13.1.11,FSM7326-SWITCHING-MIB::agentPortDefaultType,OBJECT,read-write,,current,,This object identifies the default administrative port type, to be used in conjunction with the operational port type denoted by agentPortType.  The set of possible values for this object is the same as the set defined for the agentPortType object. This object represents the administratively-configured type of the MAU. If auto-negotiation is not enabled or is not implemented for this MAU, the value of this object determines the operational type of the MAU. In this case, a set to this object will force the MAU into the specified operating mode. If auto-negotiation is implemented and enabled for this MAU, the operational type of the MAU is determined by auto-negotiation, and the value of this object denotes the type to which the MAU will automatically revert if/when auto-negotiation is later disabled.  The valid values for this object are:  dot3MauType10BaseTHD dot3MauType10BaseTFD dot3MauType100BaseTXHD dot3MauType100BaseTXFD dot3MauType100BaseFXFD dot3MauType1000BaseSXFD
.1.3.6.1.4.1.4526.1.9.1.2.13.1.12,FSM7326-SWITCHING-MIB::agentPortType,OBJECT,read-only,,current,,This object identifies the port type. An initial set of MAU types are defined in RFC 2668. The assignment of OBJECT IDENTIFIERs to new types of MAUs is managed by the IANA. If the MAU type is unknown, the object identifier unknownMauType OBJECT IDENTIFIER ::= { 0 0 } is returned. Note that unknownMauType is a syntactically valid object identifier, and any conformant implementation of ASN.1 and the BER must be able to generate and recognize this value. This object represents the operational type of the MAU, as determined by either (1) the result of the auto-negotiation function or (2) if auto-negotiation is not enabled or is not implemented for this MAU, by the value of the object agentPortDefaultType, or (3) for the GigE card a value determined by the GBIC connected to the card. In case (2), a set to the object agentPortDefaultType will force the MAU into the new operating mode.  The valid values for this object are:  dot3MauType10BaseTHD dot3MauType10BaseTFD dot3MauType100BaseTXHD dot3MauType100BaseTXFD dot3MauType100BaseFXFD dot3MauType1000BaseSXFD dot3MauType1000BaseTFD
.1.3.6.1.4.1.4526.1.9.1.2.13.1.13,FSM7326-SWITCHING-MIB::agentPortAutoNegAdminStatus,INTEGER,read-write,,current,enable(1):disable(2),This object identifies the administration status of auto negotiation for this port.
.1.3.6.1.4.1.4526.1.9.1.2.13.1.14,FSM7326-SWITCHING-MIB::agentPortDot3FlowControlMode,INTEGER,read-write,,current,enable(1):disable(2),Config flowcontrol allows you to enable or disable  802.3x flow control for this port. This value  applies to only full-duplex mode ports. 
.1.3.6.1.4.1.4526.1.9.1.2.13.1.15,FSM7326-SWITCHING-MIB::agentPortDVlanTagMode,INTEGER,read-write,,current,enable(1):disable(2),Controls the Double Vlan Tag mode on this port.
.1.3.6.1.4.1.4526.1.9.1.2.13.1.16,FSM7326-SWITCHING-MIB::agentPortDVlanTagEthertype,Integer32,read-write,,current,,Configures the Ethertype for the Double Vlan Tag for this port.  Commonly used are the Ethertypes for vman tags (34984, or 0x88A8)  and dot1q tags (33024, or 0x8100).
.1.3.6.1.4.1.4526.1.9.1.2.13.1.17,FSM7326-SWITCHING-MIB::agentPortDVlanTagCustomerId,Integer32,read-write,,current,,Configures the Customer ID for the Double Vlan Tag for this port.
.1.3.6.1.4.1.4526.1.9.1.2.13.1.18,FSM7326-SWITCHING-MIB::agentPortMaxFrameSizeLimit,Integer32,read-only,,current,,This object identifies the largest value that can be configured for agentPortMaxFrameSize
.1.3.6.1.4.1.4526.1.9.1.2.13.1.19,FSM7326-SWITCHING-MIB::agentPortMaxFrameSize,Integer32,read-write,,current,,This object identifies the currently configured maximum frame size value for this port. The maximmum value that this object can be set to is the value of agentPortMaxFrameSizeLimit. For Ethernet ports which support 802.1Q vlan tagging, the minimum value that this object can be set to is 1522
.1.3.6.1.4.1.4526.1.9.1.2.14,FSM7326-SWITCHING-MIB::agentProtocolConfigGroup,,,,,,
.1.3.6.1.4.1.4526.1.9.1.2.14.1,FSM7326-SWITCHING-MIB::agentProtocolGroupCreate,OCTET,read-write,,current,,Set to non-empty string to create a Protocol-Based VLAN group.
.1.3.6.1.4.1.4526.1.9.1.2.14.2,FSM7326-SWITCHING-MIB::agentProtocolGroupTable,,not-accessible,,current,,A table of the switch's Protocol-based VLAN entries
.1.3.6.1.4.1.4526.1.9.1.2.14.2.1,FSM7326-SWITCHING-MIB::agentProtocolGroupEntry,,not-accessible,agentProtocolGroupId,current,,Switch's Protocol-based VLAN entry
.1.3.6.1.4.1.4526.1.9.1.2.14.2.1.1,FSM7326-SWITCHING-MIB::agentProtocolGroupId,Integer32,read-only,,current,,Group identifier of the Protocol-based VLAN entry.
.1.3.6.1.4.1.4526.1.9.1.2.14.2.1.2,FSM7326-SWITCHING-MIB::agentProtocolGroupName,OCTET,read-only,,current,,Group name of the Protocol-based VLAN entry.
.1.3.6.1.4.1.4526.1.9.1.2.14.2.1.3,FSM7326-SWITCHING-MIB::agentProtocolGroupVlanId,Integer32,read-write,,current,,VLAN associated with the Protocol-based VLAN entry. Set to 0 to remove.
.1.3.6.1.4.1.4526.1.9.1.2.14.2.1.4,FSM7326-SWITCHING-MIB::agentProtocolGroupProtocolIP,INTEGER,read-write,,current,enable(1):disable(2),The status of the IP protocol association with the Protocol-based VLAN entry.
.1.3.6.1.4.1.4526.1.9.1.2.14.2.1.5,FSM7326-SWITCHING-MIB::agentProtocolGroupProtocolARP,INTEGER,read-write,,current,enable(1):disable(2),The status of the ARP protocol association with the Protocol-based VLAN entry.
.1.3.6.1.4.1.4526.1.9.1.2.14.2.1.6,FSM7326-SWITCHING-MIB::agentProtocolGroupProtocolIPX,INTEGER,read-write,,current,enable(1):disable(2),The status of the IPX protocol association with the Protocol-based VLAN entry.
.1.3.6.1.4.1.4526.1.9.1.2.14.2.1.7,FSM7326-SWITCHING-MIB::agentProtocolGroupStatus,INTEGER,read-write,,current,active(1):notInService(2):notReady(3):createAndGo(4):createAndWait(5):destroy(6),The status of the Protocol-based VLAN entry.  active(1) - this entry is active destroy(6) - remove this entry
.1.3.6.1.4.1.4526.1.9.1.2.14.3,FSM7326-SWITCHING-MIB::agentProtocolGroupPortTable,,not-accessible,,current,,A table of the switch's physical port config entries
.1.3.6.1.4.1.4526.1.9.1.2.14.3.1,FSM7326-SWITCHING-MIB::agentProtocolGroupPortEntry,,not-accessible,agentProtocolGroupId:agentProtocolGroupPortIfIndex,current,,Switch's physical port config entry
.1.3.6.1.4.1.4526.1.9.1.2.14.3.1.1,FSM7326-SWITCHING-MIB::agentProtocolGroupPortIfIndex,Integer32,read-only,,current,,The interface number of this instance.
.1.3.6.1.4.1.4526.1.9.1.2.14.3.1.2,FSM7326-SWITCHING-MIB::agentProtocolGroupPortStatus,INTEGER,read-create,,current,active(1):notInService(2):notReady(3):createAndGo(4):createAndWait(5):destroy(6),The status of this entry.  active(1) - the port is associated with this group createAndGo(4) - add the port to this group createAndWait(5) - add the port to this group destroy(6) - remove the port from this group
.1.3.6.1.4.1.4526.1.9.1.2.15,FSM7326-SWITCHING-MIB::agentStpSwitchConfigGroup,,,,,,
.1.3.6.1.4.1.4526.1.9.1.2.15.1,FSM7326-SWITCHING-MIB::agentStpConfigDigestKey,OCTET,read-only,,current,,The MST configuration digest key.
.1.3.6.1.4.1.4526.1.9.1.2.15.2,FSM7326-SWITCHING-MIB::agentStpConfigFormatSelector,Unsigned32,read-only,,current,,The MST configuration format selector. A value other than 0 (zero)  indicates non-support for the IEEE 802.1s standard.
.1.3.6.1.4.1.4526.1.9.1.2.15.3,FSM7326-SWITCHING-MIB::agentStpConfigName,OCTET,read-write,,current,,The MST configuration name of at most 32 characters.
.1.3.6.1.4.1.4526.1.9.1.2.15.4,FSM7326-SWITCHING-MIB::agentStpConfigRevision,Unsigned32,read-write,,current,,The MST configuration revision. The default value is 1.
.1.3.6.1.4.1.4526.1.9.1.2.15.5,FSM7326-SWITCHING-MIB::agentStpForceVersion,INTEGER,read-write,,current,dot1d(1):dot1w(2):dot1s(3),The MST configuration force protocol version. The default version is dot1s.
.1.3.6.1.4.1.4526.1.9.1.2.15.6,FSM7326-SWITCHING-MIB::agentStpAdminMode,INTEGER,read-write,,current,enable(1):disable(2),The spanning tree operational status.  enable(1) - enables spanning tree operational status on the switch. disable(2) - disables spanning tree operational status on the switch.  The default status is disabled.
.1.3.6.1.4.1.4526.1.9.1.2.15.7,FSM7326-SWITCHING-MIB::agentStpPortTable,,not-accessible,,current,,STP port table.
.1.3.6.1.4.1.4526.1.9.1.2.15.7.1,FSM7326-SWITCHING-MIB::agentStpPortEntry,,not-accessible,ifIndex,current,,STP port entry.
.1.3.6.1.4.1.4526.1.9.1.2.15.7.1.1,FSM7326-SWITCHING-MIB::agentStpPortState,INTEGER,read-write,,current,enable(1):disable(2),The administrative bridge port state.  enable(1) - enables the port. disable(2) - disables the port.  The default port state is enabled for the first 4095 ports and  disabled for any ports beyond.
.1.3.6.1.4.1.4526.1.9.1.2.15.7.1.2,FSM7326-SWITCHING-MIB::agentStpPortStatsMstpBpduRx,Counter32,read-only,,current,,The MSTP BPDUs received on a specific port.
.1.3.6.1.4.1.4526.1.9.1.2.15.7.1.3,FSM7326-SWITCHING-MIB::agentStpPortStatsMstpBpduTx,Counter32,read-only,,current,,The MSTP BPDUs sent from a specific port.
.1.3.6.1.4.1.4526.1.9.1.2.15.7.1.4,FSM7326-SWITCHING-MIB::agentStpPortStatsRstpBpduRx,Counter32,read-only,,current,,The RSTP BPDUs received on a specific port.
.1.3.6.1.4.1.4526.1.9.1.2.15.7.1.5,FSM7326-SWITCHING-MIB::agentStpPortStatsRstpBpduTx,Counter32,read-only,,current,,The RSTP BPDUs sent from a specific port.
.1.3.6.1.4.1.4526.1.9.1.2.15.7.1.6,FSM7326-SWITCHING-MIB::agentStpPortStatsStpBpduRx,Counter32,read-only,,current,,The STP BPDUs received on a specific port.
.1.3.6.1.4.1.4526.1.9.1.2.15.7.1.7,FSM7326-SWITCHING-MIB::agentStpPortStatsStpBpduTx,Counter32,read-only,,current,,The STP BPDUs sent from a specific port.
.1.3.6.1.4.1.4526.1.9.1.2.15.7.1.8,FSM7326-SWITCHING-MIB::agentStpPortUpTime,TimeTicks,read-only,,current,,Time since port was reset.  It is displayed in days, hours, minutes, and seconds.
.1.3.6.1.4.1.4526.1.9.1.2.15.7.1.9,FSM7326-SWITCHING-MIB::agentStpPortMigrationCheck,INTEGER,read-write,,current,false(0):true(1),Force the specified port to transmit RSTP or MSTP BPDU's.   Supported values: false(0) - BPDUs are not to be transmitted. true(1) - BPDUs are to be transmitted  A non-zero value indicates that BPDUs are to be sent on the specified port.
.1.3.6.1.4.1.4526.1.9.1.2.15.8,FSM7326-SWITCHING-MIB::agentStpCstConfigGroup,,,,,,
.1.3.6.1.4.1.4526.1.9.1.2.15.8.1,FSM7326-SWITCHING-MIB::agentStpCstHelloTime,Unsigned32,read-only,,current,,The MSTP root port hello time for the CIST.
.1.3.6.1.4.1.4526.1.9.1.2.15.8.2,FSM7326-SWITCHING-MIB::agentStpCstMaxAge,Unsigned32,read-only,,current,,The MSTP root port max age for the CIST.
.1.3.6.1.4.1.4526.1.9.1.2.15.8.3,FSM7326-SWITCHING-MIB::agentStpCstRegionalRootId,OCTET,read-only,,current,,The MSTP regional root identifier for the CIST.
.1.3.6.1.4.1.4526.1.9.1.2.15.8.4,FSM7326-SWITCHING-MIB::agentStpCstRegionalRootPathCost,Unsigned32,read-only,,current,,The MSTP regional root path cost for the CIST.
.1.3.6.1.4.1.4526.1.9.1.2.15.8.5,FSM7326-SWITCHING-MIB::agentStpCstRootFwdDelay,Unsigned32,read-only,,current,,The MSTP root port forward delay for the CIST.
.1.3.6.1.4.1.4526.1.9.1.2.15.8.6,FSM7326-SWITCHING-MIB::agentStpCstBridgeFwdDelay,Unsigned32,read-write,,current,,The MSTP bridge forward delay for the CIST. The default value is 15.
.1.3.6.1.4.1.4526.1.9.1.2.15.8.7,FSM7326-SWITCHING-MIB::agentStpCstBridgeHelloTime,Unsigned32,read-write,,current,,The MSTP bridge hello time for the CIST. The default value is 2.
.1.3.6.1.4.1.4526.1.9.1.2.15.8.8,FSM7326-SWITCHING-MIB::agentStpCstBridgeHoldTime,Unsigned32,read-only,,current,,The MSTP bridge hold time for the CIST.
.1.3.6.1.4.1.4526.1.9.1.2.15.8.9,FSM7326-SWITCHING-MIB::agentStpCstBridgeMaxAge,Unsigned32,read-write,,current,,The MSTP bridge max age for the CIST. The default value is 20.
.1.3.6.1.4.1.4526.1.9.1.2.15.9,FSM7326-SWITCHING-MIB::agentStpCstPortTable,,not-accessible,,current,,CIST port table.
.1.3.6.1.4.1.4526.1.9.1.2.15.9.1,FSM7326-SWITCHING-MIB::agentStpCstPortEntry,,not-accessible,ifIndex,current,,CIST port entry.
.1.3.6.1.4.1.4526.1.9.1.2.15.9.1.1,FSM7326-SWITCHING-MIB::agentStpCstPortOperEdge,INTEGER,read-only,,current,enable(1):disable(2),The MSTP operational status of a specific port for the CIST.
.1.3.6.1.4.1.4526.1.9.1.2.15.9.1.2,FSM7326-SWITCHING-MIB::agentStpCstPortOperPointToPoint,INTEGER,read-only,,current,true(1):false(2),The MSTP operational point to point mac of a specific port for the CIST.
.1.3.6.1.4.1.4526.1.9.1.2.15.9.1.3,FSM7326-SWITCHING-MIB::agentStpCstPortTopologyChangeAck,INTEGER,read-only,,current,true(1):false(2),The MSTP topology change acknowledge for a specific port in the CIST.
.1.3.6.1.4.1.4526.1.9.1.2.15.9.1.4,FSM7326-SWITCHING-MIB::agentStpCstPortEdge,INTEGER,read-write,,current,enable(1):disable(2),The administrative state of a specific port in CIST.  enable(1) - enables the port. disable(2) - disables the port.  The default port state is disabled.
.1.3.6.1.4.1.4526.1.9.1.2.15.9.1.5,FSM7326-SWITCHING-MIB::agentStpCstPortForwardingState,INTEGER,read-only,,current,discarding(1):learning(2):forwarding(3):disabled(4):manualFwd(5):notParticipate(6),The MSTP forwarding state of a specific port in CIST.
.1.3.6.1.4.1.4526.1.9.1.2.15.9.1.6,FSM7326-SWITCHING-MIB::agentStpCstPortId,OCTET,read-only,,current,,The MSTP port identifier of a specific port in CIST.
.1.3.6.1.4.1.4526.1.9.1.2.15.9.1.7,FSM7326-SWITCHING-MIB::agentStpCstPortPathCost,Unsigned32,read-write,,current,,The MSTP port path cost in CIST. The default value will  correspond to the recommendation specified in IEEE 802.1s Table 13-2  which varies depending upon link speed.
.1.3.6.1.4.1.4526.1.9.1.2.15.9.1.8,FSM7326-SWITCHING-MIB::agentStpCstPortPriority,Unsigned32,read-write,,current,,The MSTP port priority in CIST. The priority is  in the increments of 16. The default value is 128.
.1.3.6.1.4.1.4526.1.9.1.2.15.9.1.9,FSM7326-SWITCHING-MIB::agentStpCstDesignatedBridgeId,OCTET,read-only,,current,,The MSTP designated bridge ID of a specific port in CIST.
.1.3.6.1.4.1.4526.1.9.1.2.15.9.1.10,FSM7326-SWITCHING-MIB::agentStpCstDesignatedCost,Unsigned32,read-only,,current,,The MSTP designated cost of a specific port in CIST.
.1.3.6.1.4.1.4526.1.9.1.2.15.9.1.11,FSM7326-SWITCHING-MIB::agentStpCstDesignatedPortId,OCTET,read-only,,current,,The MSTP designated port ID of a specific port in CIST.
.1.3.6.1.4.1.4526.1.9.1.2.15.10,FSM7326-SWITCHING-MIB::agentStpMstTable,,not-accessible,,current,,MST table.
.1.3.6.1.4.1.4526.1.9.1.2.15.10.1,FSM7326-SWITCHING-MIB::agentStpMstEntry,,not-accessible,agentStpMstId,current,,MST entry.
.1.3.6.1.4.1.4526.1.9.1.2.15.10.1.1,FSM7326-SWITCHING-MIB::agentStpMstId,Unsigned32,read-only,,current,,The MSTP instance ID.
.1.3.6.1.4.1.4526.1.9.1.2.15.10.1.2,FSM7326-SWITCHING-MIB::agentStpMstBridgePriority,Unsigned32,read-write,,current,,The MSTP bridge priority in a specific instance. The priority is  in the increments of 4096. The recommended default value is 32768.
.1.3.6.1.4.1.4526.1.9.1.2.15.10.1.3,FSM7326-SWITCHING-MIB::agentStpMstBridgeIdentifier,OCTET,read-only,,current,,The MSTP bridge identifier in a specific instance.
.1.3.6.1.4.1.4526.1.9.1.2.15.10.1.4,FSM7326-SWITCHING-MIB::agentStpMstDesignatedRootId,OCTET,read-only,,current,,The MSTP designated root bridge identifier in a specific instance.
.1.3.6.1.4.1.4526.1.9.1.2.15.10.1.5,FSM7326-SWITCHING-MIB::agentStpMstRootPathCost,Unsigned32,read-only,,current,,The MSTP root path cost in a specific instance.
.1.3.6.1.4.1.4526.1.9.1.2.15.10.1.6,FSM7326-SWITCHING-MIB::agentStpMstRootPortId,OCTET,read-only,,current,,The MSTP root port ID in a specific instance.
.1.3.6.1.4.1.4526.1.9.1.2.15.10.1.7,FSM7326-SWITCHING-MIB::agentStpMstTimeSinceTopologyChange,TimeTicks,read-only,,current,,The MSTP time since the last topology change in a specific instance.
.1.3.6.1.4.1.4526.1.9.1.2.15.10.1.8,FSM7326-SWITCHING-MIB::agentStpMstTopologyChangeCount,Counter32,read-only,,current,,The MSTP count of topology changes in a specific instance.
.1.3.6.1.4.1.4526.1.9.1.2.15.10.1.9,FSM7326-SWITCHING-MIB::agentStpMstTopologyChangeParm,INTEGER,read-only,,current,true(1):false(2),The MSTP topology change parameter in a specific instance.
.1.3.6.1.4.1.4526.1.9.1.2.15.10.1.10,FSM7326-SWITCHING-MIB::agentStpMstRowStatus,INTEGER,read-create,,current,active(1):notInService(2):notReady(3):createAndGo(4):createAndWait(5):destroy(6),The MSTP instance status.  Supported values: active(1) - valid instance. createAndGo(4) - used to create a new instance. destroy(6) - removes an instance.
.1.3.6.1.4.1.4526.1.9.1.2.15.11,FSM7326-SWITCHING-MIB::agentStpMstPortTable,,not-accessible,,current,,MST port table.
.1.3.6.1.4.1.4526.1.9.1.2.15.11.1,FSM7326-SWITCHING-MIB::agentStpMstPortEntry,,not-accessible,agentStpMstId:ifIndex,current,,MST port entry.
.1.3.6.1.4.1.4526.1.9.1.2.15.11.1.1,FSM7326-SWITCHING-MIB::agentStpMstPortForwardingState,INTEGER,read-only,,current,discarding(1):learning(2):forwarding(3):disabled(4):manualFwd(5):notParticipate(6),The MSTP forwarding state of a specific port in a specific instance.
.1.3.6.1.4.1.4526.1.9.1.2.15.11.1.2,FSM7326-SWITCHING-MIB::agentStpMstPortId,OCTET,read-only,,current,,The MSTP port identifier of a specific port in a specific instance.
.1.3.6.1.4.1.4526.1.9.1.2.15.11.1.3,FSM7326-SWITCHING-MIB::agentStpMstPortPathCost,Unsigned32,read-write,,current,,The MSTP port path cost in a specific instance. The default value will  correspond to the recommendation specified in IEEE 802.1s Table 13-2  which varies depending upon link speed.
.1.3.6.1.4.1.4526.1.9.1.2.15.11.1.4,FSM7326-SWITCHING-MIB::agentStpMstPortPriority,Unsigned32,read-write,,current,,The MSTP port priority in a specific instance. The priority is  in the increments of 16. The default value is 128.
.1.3.6.1.4.1.4526.1.9.1.2.15.11.1.5,FSM7326-SWITCHING-MIB::agentStpMstDesignatedBridgeId,OCTET,read-only,,current,,The MSTP designated bridge ID of a specific port in a specific instance.
.1.3.6.1.4.1.4526.1.9.1.2.15.11.1.6,FSM7326-SWITCHING-MIB::agentStpMstDesignatedCost,Unsigned32,read-only,,current,,The MSTP designated cost of a specific port in a specific instance.
.1.3.6.1.4.1.4526.1.9.1.2.15.11.1.7,FSM7326-SWITCHING-MIB::agentStpMstDesignatedPortId,OCTET,read-only,,current,,The MSTP designated port ID of a specific port in a specific instance.
.1.3.6.1.4.1.4526.1.9.1.2.15.12,FSM7326-SWITCHING-MIB::agentStpMstVlanTable,,not-accessible,,current,,MST VLAN table.
.1.3.6.1.4.1.4526.1.9.1.2.15.12.1,FSM7326-SWITCHING-MIB::agentStpMstVlanEntry,,not-accessible,agentStpMstId:dot1qVlanIndex,current,,MST VLAN entry.
.1.3.6.1.4.1.4526.1.9.1.2.15.12.1.1,FSM7326-SWITCHING-MIB::agentStpMstVlanRowStatus,INTEGER,read-create,,current,active(1):notInService(2):notReady(3):createAndGo(4):createAndWait(5):destroy(6),The association status of an MSTP instance and a VLAN.  Supported values: active(1) - valid association between an MSTP instance and a VLAN. createAndGo(4) - used to create a new association between an MSTP instance and a VLAN. destroy(6) - removes the association between an MSTP instance and a VLAN.
.1.3.6.1.4.1.4526.1.9.1.2.16,FSM7326-SWITCHING-MIB::agentAuthenticationGroup,,,,,,
.1.3.6.1.4.1.4526.1.9.1.2.16.1,FSM7326-SWITCHING-MIB::agentAuthenticationListCreate,OCTET,read-write,,current,,Authentication List Create If set to a non empty string, creates a new Authentication List for configuration.
.1.3.6.1.4.1.4526.1.9.1.2.16.2,FSM7326-SWITCHING-MIB::agentAuthenticationListTable,,not-accessible,,current,,MST VLAN table.
.1.3.6.1.4.1.4526.1.9.1.2.16.2.1,FSM7326-SWITCHING-MIB::agentAuthenticationListEntry,,not-accessible,agentAuthenticationListIndex,current,,MST VLAN entry.
.1.3.6.1.4.1.4526.1.9.1.2.16.2.1.1,FSM7326-SWITCHING-MIB::agentAuthenticationListIndex,Unsigned32,not-accessible,,current,,Authenticaiton List Index Unique number used for indexing into this table.
.1.3.6.1.4.1.4526.1.9.1.2.16.2.1.2,FSM7326-SWITCHING-MIB::agentAuthenticationListName,OCTET,read-only,,current,,Authenticaiton List Name Unique name used to identify the Authentication List from other tables.
.1.3.6.1.4.1.4526.1.9.1.2.16.2.1.3,FSM7326-SWITCHING-MIB::agentAuthenticationListMethod1,INTEGER,read-write,,current,local(1):radius(2):reject(3),Authenticion List Method 1 Configures the first authentication method to use when this list is  specified.
.1.3.6.1.4.1.4526.1.9.1.2.16.2.1.4,FSM7326-SWITCHING-MIB::agentAuthenticationListMethod2,INTEGER,read-write,,current,undefined(1):local(2):radius(3):reject(4),Authenticion List Method 2 Configures the second authentication method to use when this list is  specified.
.1.3.6.1.4.1.4526.1.9.1.2.16.2.1.5,FSM7326-SWITCHING-MIB::agentAuthenticationListMethod3,INTEGER,read-write,,current,undefined(1):local(2):radius(3):reject(4),Authenticion List Method 3 Configures the third authentication method to use when this list is  specified.
.1.3.6.1.4.1.4526.1.9.1.2.16.2.1.6,FSM7326-SWITCHING-MIB::agentAuthenticationListStatus,INTEGER,read-write,,current,active(1):notInService(2):notReady(3):createAndGo(4):createAndWait(5):destroy(6),The status of the Authentication List.  Supported values: active(1) - indicates a valid Authenticaiton List destroy(6) - removes the Authentication List.
.1.3.6.1.4.1.4526.1.9.1.2.16.3,FSM7326-SWITCHING-MIB::agentUserConfigDefaultAuthenticationList,OCTET,read-write,,current,,Default Authentication List This object configures which authentication list to use for users which do not have an Authentication List configured. The list  must be configured before setting.
.1.3.6.1.4.1.4526.1.9.1.2.16.4,FSM7326-SWITCHING-MIB::agentUserAuthenticationConfigTable,,not-accessible,,current,,User Authentication Config Table
.1.3.6.1.4.1.4526.1.9.1.2.16.4.1,FSM7326-SWITCHING-MIB::agentUserAuthenticationConfigEntry,,not-accessible,,current,,User Authentication Config Entry
.1.3.6.1.4.1.4526.1.9.1.2.16.4.1.1,FSM7326-SWITCHING-MIB::agentUserAuthenticationList,OCTET,read-write,,current,,User Authentication List This object configures which authentication list to use for this user. The list must be configured before setting.
.1.3.6.1.4.1.4526.1.9.1.2.16.5,FSM7326-SWITCHING-MIB::agentUserPortConfigTable,,not-accessible,,current,,User Port Config Table
.1.3.6.1.4.1.4526.1.9.1.2.16.5.1,FSM7326-SWITCHING-MIB::agentUserPortConfigEntry,,not-accessible,,current,,User Port Config Entry
.1.3.6.1.4.1.4526.1.9.1.2.16.5.1.1,FSM7326-SWITCHING-MIB::agentUserPortSecurity,OCTET,read-write,,current,,User Port Port Security This object configures which ports the user has access to. Ports are indexed based on dot1dBasePort entries in  dot1dBasePortTable.
.1.3.6.1.4.1.4526.1.9.1.2.17,FSM7326-SWITCHING-MIB::agentClassOfServiceGroup,,,,,,
.1.3.6.1.4.1.4526.1.9.1.2.17.1,FSM7326-SWITCHING-MIB::agentClassOfServiceTable,,not-accessible,,current,,A table that contains information about the 802.1p priority mapping to traffic class priority queue for every physical port.
.1.3.6.1.4.1.4526.1.9.1.2.17.1.1,FSM7326-SWITCHING-MIB::agentClassOfServiceEntry,,not-accessible,agentClassOfServicePriority,current,,A 802.1p priority mapped to a traffic class priority queue.
.1.3.6.1.4.1.4526.1.9.1.2.17.1.1.1,FSM7326-SWITCHING-MIB::agentClassOfServicePriority,Integer32,not-accessible,,current,,The Priority value determined for the received frame. This value is equivalent to the priority indicated in the tagged frame received, or one of the evaluated priorities, determined according to the media-type. For untagged frames received from Ethernet media, this value is equal to the dot1dPortDefaultUserPriority value for the ingress port.
.1.3.6.1.4.1.4526.1.9.1.2.17.1.1.2,FSM7326-SWITCHING-MIB::agentClassOfServiceClass,Integer32,read-write,,current,,Traffic class priority queue the received frame is mapped to.
.1.3.6.1.4.1.4526.1.9.1.3,FSM7326-SWITCHING-MIB::agentSystemGroup,,,,,,
.1.3.6.1.4.1.4526.1.9.1.3.1,FSM7326-SWITCHING-MIB::agentSaveConfig,INTEGER,read-write,,current,enable(1):disable(2),Enable agentSaveConfig will initiate an configuration save to nvram. Disable agentSaveConfig after a configuration save will reset  agentSaveConfigStatus back to notInitiated state.
.1.3.6.1.4.1.4526.1.9.1.3.2,FSM7326-SWITCHING-MIB::agentClearConfig,INTEGER,read-write,,current,enable(1):disable(2),clear config to factory defaults
.1.3.6.1.4.1.4526.1.9.1.3.3,FSM7326-SWITCHING-MIB::agentClearLags,INTEGER,read-write,,current,enable(1):disable(2),clear lag configuration
.1.3.6.1.4.1.4526.1.9.1.3.4,FSM7326-SWITCHING-MIB::agentClearLoginSessions,INTEGER,read-write,,current,enable(1):disable(2),close all telnet sessions
.1.3.6.1.4.1.4526.1.9.1.3.5,FSM7326-SWITCHING-MIB::agentClearPasswords,INTEGER,read-write,,current,enable(1):disable(2),reset passwords
.1.3.6.1.4.1.4526.1.9.1.3.6,FSM7326-SWITCHING-MIB::agentClearPortStats,INTEGER,read-write,,current,enable(1):disable(2),clear all port statistics
.1.3.6.1.4.1.4526.1.9.1.3.7,FSM7326-SWITCHING-MIB::agentClearSwitchStats,INTEGER,read-write,,current,enable(1):disable(2),clear all switch statistics
.1.3.6.1.4.1.4526.1.9.1.3.8,FSM7326-SWITCHING-MIB::agentClearTrapLog,INTEGER,read-write,,current,enable(1):disable(2),clear trap log
.1.3.6.1.4.1.4526.1.9.1.3.9,FSM7326-SWITCHING-MIB::agentClearVlan,INTEGER,read-write,,current,enable(1):disable(2),clear vlan entries
.1.3.6.1.4.1.4526.1.9.1.3.10,FSM7326-SWITCHING-MIB::agentResetSystem,INTEGER,read-write,,current,enable(1):disable(2),reset the switch
.1.3.6.1.4.1.4526.1.9.1.3.11,FSM7326-SWITCHING-MIB::agentSaveConfigStatus,INTEGER,read-only,,current,notInitiated(1):savingInProcess(2):savingComplete(3),Indicates the current status of an save configuration request.
.1.3.6.1.4.1.4526.1.9.1.4,FSM7326-SWITCHING-MIB::agentCableTesterGroup,,,,,,
.1.3.6.1.4.1.4526.1.9.1.4.1,FSM7326-SWITCHING-MIB::agentCableTesterStatus,INTEGER,read-write,,current,active(1):success(2):failure(3):uninitialized(4),Status of the Virtual Cable Tester active(1) - cable testing is in progress. Set to this value to start the test. success(2) - A successful test was performed. Cannot be set. failure(3) - A failure was encountered during the test. Cannot be set. uninitialized(4) - No test has been performed yet. Cannot be set.
.1.3.6.1.4.1.4526.1.9.1.4.2,FSM7326-SWITCHING-MIB::agentCableTesterIfIndex,Unsigned32,read-write,,current,,Determines on which port to perform the cable test. Limited to  copper based ports.
.1.3.6.1.4.1.4526.1.9.1.4.3,FSM7326-SWITCHING-MIB::agentCableTesterCableStatus,INTEGER,read-only,,current,normal(1):open(2):short(3):unknown(4),Indicates the results of the Cable Test.   normal(1) - The cable is working correctly. open(2) - The cable is disconnected or there is a faulty connector. short(3) - There is an electrical short in the cable. unknown(4) - No test has been performed yet, or a test is currently in progress.
.1.3.6.1.4.1.4526.1.9.1.4.4,FSM7326-SWITCHING-MIB::agentCableTesterMinimumCableLength,Unsigned32,read-only,,current,,The estimated length of the cable in meters. This value  indicates the shortest length estimated. This object will return 0 if agentCableTesterStatus is not success(2) or the cable length is unknown.
.1.3.6.1.4.1.4526.1.9.1.4.5,FSM7326-SWITCHING-MIB::agentCableTesterMaximumCableLength,Unsigned32,read-only,,current,,The estimated length of the cable in meters. This value  indicates the longest length estimated. This object will return 0 if agentCableTesterStatus is not success(2) or the cable length is unknown.
.1.3.6.1.4.1.4526.1.9.1.4.6,FSM7326-SWITCHING-MIB::agentCableTesterCableFailureLocation,Unsigned32,read-only,,current,,The estimated distance in meters from the end of the cable to the failure location. This object will return 0 if  agentCableTesterStatus is not success(2).
.1.3.6.1.4.1.4526.1.9.1.50,FSM7326-SWITCHING-MIB::fsm7326SwitchingTraps,,,,,,
.1.3.6.1.4.1.4526.1.9.1.50.1,FSM7326-SWITCHING-MIB::multipleUsersTrap,,,,,,trapMgrMultipleUsersLogTrap.
.1.3.6.1.4.1.4526.1.9.1.50.2,FSM7326-SWITCHING-MIB::broadcastStormStartTrap,,,,,,trapMgrBCastStormStartLogTrap.
.1.3.6.1.4.1.4526.1.9.1.50.3,FSM7326-SWITCHING-MIB::broadcastStormEndTrap,,,,,,trapMgrBCastStormEndLogTrap.
.1.3.6.1.4.1.4526.1.9.1.50.4,FSM7326-SWITCHING-MIB::linkFailureTrap,,,,,,trapMgrLinkFailureLogTrap.
.1.3.6.1.4.1.4526.1.9.1.50.5,FSM7326-SWITCHING-MIB::vlanRequestFailureTrap,,,,,,trapMgrVlanRequestFailureLogTrap
.1.3.6.1.4.1.4526.1.9.1.50.6,FSM7326-SWITCHING-MIB::vlanDeleteLastTrap,,,,,,trapMgrLastVlanDeleteLastLogTrap
.1.3.6.1.4.1.4526.1.9.1.50.7,FSM7326-SWITCHING-MIB::vlanDefaultCfgFailureTrap,,,,,,trapMgrDefaultVlanCfgFailureLogTrap
.1.3.6.1.4.1.4526.1.9.1.50.8,FSM7326-SWITCHING-MIB::vlanRestoreFailureTrap,,,,,,trapMgrVlanRestoreFailureLogTrap
.1.3.6.1.4.1.4526.1.9.1.50.9,FSM7326-SWITCHING-MIB::fanFailureTrap,,,,,,trapMgrFanFailureLogTrap.
.1.3.6.1.4.1.4526.1.9.1.50.10,FSM7326-SWITCHING-MIB::stpInstanceNewRootTrap,,,,,,trapMgrStpInstanceNewRootTrap
.1.3.6.1.4.1.4526.1.9.1.50.11,FSM7326-SWITCHING-MIB::stpInstanceTopologyChangeTrap,,,,,,trapMgrStpInstanceTopologyChange
.1.3.6.1.4.1.4526.1.9.1.50.12,FSM7326-SWITCHING-MIB::powerSupplyStatusChangeTrap,,,,,,powerSupplyStatusChangeTrap
.1.3.6.1.4.1.4526.1.9.2,FSM7326-ROUTING-MIB::fsm7326Routing,,,,,,
.1.3.6.1.4.1.4526.1.9.2.1,FSM7326-ROUTING-MIB::agentSwitchArpGroup,,,,,,
.1.3.6.1.4.1.4526.1.9.2.1.1,FSM7326-ROUTING-MIB::agentSwitchArpAgeoutTime,Integer32,read-write,,current,,Configures the ARP entry ageout time in seconds. Allowable range: 15-21600
.1.3.6.1.4.1.4526.1.9.2.1.2,FSM7326-ROUTING-MIB::agentSwitchArpResponseTime,Integer32,read-write,,current,,Configures the ARP request response timeout in seconds. Allowable range: 1-10
.1.3.6.1.4.1.4526.1.9.2.1.3,FSM7326-ROUTING-MIB::agentSwitchArpMaxRetries,Integer32,read-write,,current,,Configures the ARP count of maximum request for retries. Allowable range: 0-10
.1.3.6.1.4.1.4526.1.9.2.1.4,FSM7326-ROUTING-MIB::agentSwitchArpCacheSize,Integer32,read-write,,current,,Configures the ARP maximum number of entries in the cache.
.1.3.6.1.4.1.4526.1.9.2.1.5,FSM7326-ROUTING-MIB::agentSwitchArpDynamicRenew,INTEGER,read-write,,current,enable(1):disable(2),This indicates the current setting of ARP dynamic renew mode. 
.1.3.6.1.4.1.4526.1.9.2.1.6,FSM7326-ROUTING-MIB::agentSwitchArpTotalEntryCountCurrent,Gauge32,read-only,,current,,Current number of entries in the ARP cache.
.1.3.6.1.4.1.4526.1.9.2.1.7,FSM7326-ROUTING-MIB::agentSwitchArpTotalEntryCountPeak,Gauge32,read-only,,current,,Peak number of entries recorded in the ARP cache over
.1.3.6.1.4.1.4526.1.9.2.1.8,FSM7326-ROUTING-MIB::agentSwitchArpStaticEntryCountCurrent,Gauge32,read-only,,current,,Current number of configured static ARP entries.
.1.3.6.1.4.1.4526.1.9.2.1.9,FSM7326-ROUTING-MIB::agentSwitchArpStaticEntryCountMax,Integer32,read-only,,current,,Maximum number of configurable static ARP entries.
.1.3.6.1.4.1.4526.1.9.2.1.10,FSM7326-ROUTING-MIB::agentSwitchArpTable,,not-accessible,,current,,This table augments the MIB-II ipNetToMediaTable by providing per-interface ARP entry information.
.1.3.6.1.4.1.4526.1.9.2.1.10.1,FSM7326-ROUTING-MIB::agentSwitchArpEntry,,not-accessible,agentSwitchArpIpAddress,current,,
.1.3.6.1.4.1.4526.1.9.2.1.10.1.1,FSM7326-ROUTING-MIB::agentSwitchArpAge,TimeTicks,read-only,,current,,This defines the time (in seconds) since the ARP entry 
.1.3.6.1.4.1.4526.1.9.2.1.10.1.2,FSM7326-ROUTING-MIB::agentSwitchArpIpAddress,IpAddress,read-only,,current,,The IP Address assigned to each interface.
.1.3.6.1.4.1.4526.1.9.2.1.10.1.3,FSM7326-ROUTING-MIB::agentSwitchArpMacAddress,OCTET,read-create,,current,,The hardware MAX Address that each interface maps to.
.1.3.6.1.4.1.4526.1.9.2.1.10.1.4,FSM7326-ROUTING-MIB::agentSwitchArpInterface,Integer32,read-only,,current,,The Associated IfIndex which identified the ARP Entry.
.1.3.6.1.4.1.4526.1.9.2.1.10.1.5,FSM7326-ROUTING-MIB::agentSwitchArpType,INTEGER,read-only,,current,local(1):gateway(2):static(3):dynamic(4),The type of ARP entry.
.1.3.6.1.4.1.4526.1.9.2.1.10.1.6,FSM7326-ROUTING-MIB::agentSwitchArpStatus,INTEGER,read-write,,current,active(1):notInService(2):notReady(3):createAndGo(4):createAndWait(5):destroy(6),The status of this ARP entry. Setting this object destroy will remove the entry.
.1.3.6.1.4.1.4526.1.9.2.2,FSM7326-ROUTING-MIB::agentSwitchIpGroup,,,,,,
.1.3.6.1.4.1.4526.1.9.2.2.1,FSM7326-ROUTING-MIB::agentSwitchIpRoutingMode,INTEGER,read-write,,current,enable(1):disable(2),Administratively enables/disables routing on the switch.
.1.3.6.1.4.1.4526.1.9.2.2.3,FSM7326-ROUTING-MIB::agentSwitchIpInterfaceTable,,not-accessible,,current,,
.1.3.6.1.4.1.4526.1.9.2.2.3.1,FSM7326-ROUTING-MIB::agentSwitchIpInterfaceEntry,,not-accessible,agentSwitchIpInterfaceIfIndex,current,,
.1.3.6.1.4.1.4526.1.9.2.2.3.1.1,FSM7326-ROUTING-MIB::agentSwitchIpInterfaceIfIndex,Integer32,read-only,,current,,The IfIndex associated with this instance.
.1.3.6.1.4.1.4526.1.9.2.2.3.1.2,FSM7326-ROUTING-MIB::agentSwitchIpInterfaceIpAddress,IpAddress,read-write,,current,,The IpAddress assigned to this interface. When setting this value, the value of agentSwitchIpInterfaceNetMask must be set at the same time.
.1.3.6.1.4.1.4526.1.9.2.2.3.1.3,FSM7326-ROUTING-MIB::agentSwitchIpInterfaceNetMask,IpAddress,read-write,,current,,The NetMask assigned to this interface. When setting this value, the  value of agentSwitchIpInterfaceIpAddress must be set at the same time.
.1.3.6.1.4.1.4526.1.9.2.2.3.1.4,FSM7326-ROUTING-MIB::agentSwitchIpInterfaceClearIp,INTEGER,read-write,,current,enable(1):disable(2),Sets the interfaces IpAddress and NetMask back to 0.0.0.0
.1.3.6.1.4.1.4526.1.9.2.2.3.1.5,FSM7326-ROUTING-MIB::agentSwitchIpInterfaceRoutingMode,INTEGER,read-write,,current,enable(1):disable(2),Enables or disables routing for this interface.
.1.3.6.1.4.1.4526.1.9.2.2.4,FSM7326-ROUTING-MIB::agentSwitchIpRouterDiscoveryTable,,not-accessible,,current,,There is no global administrative flag for router discovery. The global routing flag (agentSwitchIpRoutingMode) will be used for this purpose. If routing is disabled, router discovery is disabled as well.
.1.3.6.1.4.1.4526.1.9.2.2.4.1,FSM7326-ROUTING-MIB::agentSwitchIpRouterDiscoveryEntry,,not-accessible,agentSwitchIpRouterDiscoveryIfIndex,current,,
.1.3.6.1.4.1.4526.1.9.2.2.4.1.1,FSM7326-ROUTING-MIB::agentSwitchIpRouterDiscoveryIfIndex,Integer32,read-only,,current,,Interface Number to configure Router Discovery on.
.1.3.6.1.4.1.4526.1.9.2.2.4.1.2,FSM7326-ROUTING-MIB::agentSwitchIpRouterDiscoveryAdvertiseMode,INTEGER,read-write,,current,enable(1):disable(2),Enable or disable router discovery on the interface.
.1.3.6.1.4.1.4526.1.9.2.2.4.1.3,FSM7326-ROUTING-MIB::agentSwitchIpRouterDiscoveryMaxAdvertisementInterval,Integer32,read-write,,current,,Maximum time allowed between sending router advertisements  from the interface.
.1.3.6.1.4.1.4526.1.9.2.2.4.1.4,FSM7326-ROUTING-MIB::agentSwitchIpRouterDiscoveryMinAdvertisementInterval,Integer32,read-write,,current,,Minimum time allowed between sending router advertisements from the interface.  This value must be less than or equal to  agentSwitchIpRouterDiscoveryMaxAdvertisementInterval.
.1.3.6.1.4.1.4526.1.9.2.2.4.1.5,FSM7326-ROUTING-MIB::agentSwitchIpRouterDiscoveryAdvertisementLifetime,Integer32,read-write,,current,,Value of lifetime field of router advertsisement sent from  the interface.  This value must be greater than or equal to  agentSwitchIpRouterDiscoveryMaxAdvertisementInterval.
.1.3.6.1.4.1.4526.1.9.2.2.4.1.6,FSM7326-ROUTING-MIB::agentSwitchIpRouterDiscoveryPreferenceLevel,Integer32,read-write,,current,,Preferability of the address as a default router address, related to other addresses on the same subnet. This is defined as the larger the number, the higher the preference.
.1.3.6.1.4.1.4526.1.9.2.2.4.1.7,FSM7326-ROUTING-MIB::agentSwitchIpRouterDiscoveryAdvertisementAddress,IpAddress,read-write,,current,,Address used when sending router advertisements from the interface.
.1.3.6.1.4.1.4526.1.9.2.2.5,FSM7326-ROUTING-MIB::agentSwitchIpVlanTable,,not-accessible,,current,,
.1.3.6.1.4.1.4526.1.9.2.2.5.1,FSM7326-ROUTING-MIB::agentSwitchIpVlanEntry,,not-accessible,agentSwitchIpVlanId,current,,A Static VLAN for which routing can be enabled/disabled
.1.3.6.1.4.1.4526.1.9.2.2.5.1.1,FSM7326-ROUTING-MIB::agentSwitchIpVlanId,Integer32,read-only,,current,,The Vlan's Id.
.1.3.6.1.4.1.4526.1.9.2.2.5.1.2,FSM7326-ROUTING-MIB::agentSwitchIpVlanIfIndex,Integer32,read-only,,current,,The IfIndex associated with this VLAN.
.1.3.6.1.4.1.4526.1.9.2.2.5.1.3,FSM7326-ROUTING-MIB::agentSwitchIpVlanRoutingStatus,INTEGER,read-create,,current,active(1):notInService(2):notReady(3):createAndGo(4):createAndWait(5):destroy(6),Status of Routing mode per Vlan. active(1) - Vlan is enabled for routing createAndGo(4) - Adds Vlan entry for routing destroy(6) - Removes Vlan from routing
.1.3.6.1.4.1.4526.1.9.2.3,FSM7326-ROUTING-MIB::agentRouterRipConfigGroup,,,,,,
.1.3.6.1.4.1.4526.1.9.2.3.1,FSM7326-ROUTING-MIB::agentRouterRipAdminState,INTEGER,read-write,,current,enable(1):disable(2),Sets the administrative mode of RIP in the router.
.1.3.6.1.4.1.4526.1.9.2.3.2,FSM7326-ROUTING-MIB::agentRouterRipSplitHorizonMode,INTEGER,read-write,,current,none(1):simple(2):poisonReverse(3),Sets the RIP split horizon operating mode in the router.
.1.3.6.1.4.1.4526.1.9.2.3.3,FSM7326-ROUTING-MIB::agentRouterRipAutoSummaryMode,INTEGER,read-write,,current,enable(1):disable(2),Sets the RIP auto summarization mode in the router.
.1.3.6.1.4.1.4526.1.9.2.3.4,FSM7326-ROUTING-MIB::agentRouterRipHostRoutesAcceptMode,INTEGER,read-write,,current,enable(1):disable(2),Sets the RIP host route acceptance mode in the router.
.1.3.6.1.4.1.4526.1.9.2.3.5,FSM7326-ROUTING-MIB::agentRouterRipDefaultMetric,Integer32,read-write,,current,,Default metric of redistributed routes, when RIP redistributes  from other protocols.
.1.3.6.1.4.1.4526.1.9.2.3.6,FSM7326-ROUTING-MIB::agentRouterRipDefaultMetricConfigured,,read-write,,current,,Flag to determine whether RIP default-metric is configured or not.
.1.3.6.1.4.1.4526.1.9.2.3.7,FSM7326-ROUTING-MIB::agentRouterRipDefaultInfoOriginate,,read-write,,current,,Flag to determine, whether RIP can advertise a default-route learned from another protocol.
.1.3.6.1.4.1.4526.1.9.2.3.8,FSM7326-ROUTING-MIB::agentRipRouteRedistTable,,not-accessible,,current,,This table contains the MIB objects required to configure  route-redistribution for RIP. Here, RIP is the Destination protocol and the source protocols can be any of : BGP, OSPF, Static, Connected.
.1.3.6.1.4.1.4526.1.9.2.3.8.1,FSM7326-ROUTING-MIB::agentRipRouteRedistEntry,,not-accessible,agentRipRouteRedistSource,current,,
.1.3.6.1.4.1.4526.1.9.2.3.8.1.1,FSM7326-ROUTING-MIB::agentRipRouteRedistSource,INTEGER,read-only,,current,connected(1):static(2):ospf(3):bgp(4),Source route, from which RIP can redistribute routes. This object also acts as the identifier for the  RIP redistribution Table entry.
.1.3.6.1.4.1.4526.1.9.2.3.8.1.2,FSM7326-ROUTING-MIB::agentRipRouteRedistMode,INTEGER,read-write,,current,enable(1):disable(2),User enabels/disables route-redistribution for a particular source protocol.
.1.3.6.1.4.1.4526.1.9.2.3.8.1.3,FSM7326-ROUTING-MIB::agentRipRouteRedistMetric,Integer32,read-write,,current,,Metric used for redistributing a particular source protocol route into RIP.
.1.3.6.1.4.1.4526.1.9.2.3.8.1.4,FSM7326-ROUTING-MIB::agentRipRouteRedistMetricConfigured,,read-write,,current,,Flag to determine whether RIP redistribute-metric is configured or not.
.1.3.6.1.4.1.4526.1.9.2.3.8.1.5,FSM7326-ROUTING-MIB::agentRipRouteRedistMatchInternal,INTEGER,read-write,,current,true(1):false(2):not-applicable(3),If this flag is true, RIP redistributes OSPF internal routes. It will be non-applicable, when source protocol is other than ospf.
.1.3.6.1.4.1.4526.1.9.2.3.8.1.6,FSM7326-ROUTING-MIB::agentRipRouteRedistMatchExternal1,INTEGER,read-write,,current,true(1):false(2):not-applicable(3),If this flag is true, RIP redistributes OSPF External1 routes. It will be non-applicable, when source protocol is other than ospf.
.1.3.6.1.4.1.4526.1.9.2.3.8.1.7,FSM7326-ROUTING-MIB::agentRipRouteRedistMatchExternal2,INTEGER,read-write,,current,true(1):false(2):not-applicable(3),If this flag is true, RIP redistributes OSPF External2 routes. It will be non-applicable, when source protocol is other than ospf.
.1.3.6.1.4.1.4526.1.9.2.3.8.1.8,FSM7326-ROUTING-MIB::agentRipRouteRedistMatchNSSAExternal1,INTEGER,read-write,,current,true(1):false(2):not-applicable(3),If this flag is true, RIP redistributes OSPF NSSA-External1 routes. It will be non-applicable, when source protocol is other than ospf.
.1.3.6.1.4.1.4526.1.9.2.3.8.1.9,FSM7326-ROUTING-MIB::agentRipRouteRedistMatchNSSAExternal2,INTEGER,read-write,,current,true(1):false(2):not-applicable(3),If this flag is true, RIP redistributes OSPF NSSA-External2 routes. It will be non-applicable, when source protocol is other than ospf.
.1.3.6.1.4.1.4526.1.9.2.3.8.1.10,FSM7326-ROUTING-MIB::agentRipRouteRedistDistList,Unsigned32,read-write,,current,,Access-list number of the access-list, which filters routes received from a source-protocol.
.1.3.6.1.4.1.4526.1.9.2.3.8.1.11,FSM7326-ROUTING-MIB::agentRipRouteRedistDistListConfigured,,read-write,,current,,Flag to determine whether Access-list is configured or not.
.1.3.6.1.4.1.4526.1.9.2.3.9,FSM7326-ROUTING-MIB::agentRip2IfConfTable,,not-accessible,,current,,A list of subnets which require separate configuration in RIP. Augments rip2IfConfTable
.1.3.6.1.4.1.4526.1.9.2.3.9.1,FSM7326-ROUTING-MIB::agentRip2IfConfEntry,,not-accessible,,current,,A Single Routing Domain in a single Subnet.
.1.3.6.1.4.1.4526.1.9.2.3.9.1.1,FSM7326-ROUTING-MIB::agentRip2IfConfAuthKeyId,INTEGER,read-create,,current,,The identifier for the authentication key used on this interface. This field is only meaningful  when the RIPv2-MIB rip2IfConfAuthType is md5(3); 
.1.3.6.1.4.1.4526.1.9.2.4,FSM7326-ROUTING-MIB::agentRouterOspfConfigGroup,,,,,,
.1.3.6.1.4.1.4526.1.9.2.4.1,FSM7326-ROUTING-MIB::agentOspfDefaultMetric,Integer32,read-write,,current,,Default metric of redistributed routes, when OSPF redistributes  from other protocols.
.1.3.6.1.4.1.4526.1.9.2.4.2,FSM7326-ROUTING-MIB::agentOspfDefaultMetricConfigured,,read-write,,current,,Flag to determine whether OSPF default-metric is configured or not.
.1.3.6.1.4.1.4526.1.9.2.4.3,FSM7326-ROUTING-MIB::agentOspfDefaultInfoOriginate,,read-write,,current,,Flag to determine, whether OSPF can advertise a default-route learned from another protocol.
.1.3.6.1.4.1.4526.1.9.2.4.4,FSM7326-ROUTING-MIB::agentOspfDefaultInfoOriginateAlways,,read-write,,current,,When this flag is true, the router advertises 0.0.0.0/0.0.0.0 always. Without this option, OSPF will only advertise 0.0.0.0/0.0.0.0 if the router's forwarding table contains a default route.
.1.3.6.1.4.1.4526.1.9.2.4.5,FSM7326-ROUTING-MIB::agentOspfDefaultInfoOriginateMetric,Integer32,read-write,,current,,Metric of the default route,which OSPF advertises when learned from other protocol.
.1.3.6.1.4.1.4526.1.9.2.4.6,FSM7326-ROUTING-MIB::agentOspfDefaultInfoOriginateMetricConfigured,,read-write,,current,,Flag to determine whether OSPF default-info originate metric  is configured or not.
.1.3.6.1.4.1.4526.1.9.2.4.7,FSM7326-ROUTING-MIB::agentOspfDefaultInfoOriginateMetricType,INTEGER,read-write,,current,externalType1(1):externalType2(2),Metric Type of the default route,which OSPF advertises when learned from other protocol. It can be 1(external type 1) or 2(external type 2).
.1.3.6.1.4.1.4526.1.9.2.4.8,FSM7326-ROUTING-MIB::agentOspfRouteRedistTable,,not-accessible,,current,,This table contains the MIB objects required to configure  route-redistribution for OSPF. Here, OSPF is the Destination protocol and the source protocols can be any of : BGP, RIP, Static, Connected.
.1.3.6.1.4.1.4526.1.9.2.4.8.1,FSM7326-ROUTING-MIB::agentOspfRouteRedistEntry,,not-accessible,agentOspfRouteRedistSource,current,,
.1.3.6.1.4.1.4526.1.9.2.4.8.1.1,FSM7326-ROUTING-MIB::agentOspfRouteRedistSource,INTEGER,read-only,,current,connected(1):static(2):rip(3):bgp(4),Source protocol, from which OSPF can redistribute routes. This object also acts as the identifier for the  OSPF redistribution Table entry.
.1.3.6.1.4.1.4526.1.9.2.4.8.1.2,FSM7326-ROUTING-MIB::agentOspfRouteRedistMode,INTEGER,read-write,,current,enable(1):disable(2),User enabels/disables route-redistribution for a particular source protocol.
.1.3.6.1.4.1.4526.1.9.2.4.8.1.3,FSM7326-ROUTING-MIB::agentOspfRouteRedistMetric,Integer32,read-write,,current,,Metric used for redistributing a particular source protocol route into OSPF.
.1.3.6.1.4.1.4526.1.9.2.4.8.1.4,FSM7326-ROUTING-MIB::agentOspfRouteRedistMetricConfigured,,read-write,,current,,Flag to determine whether OSPF redistribute-metric is configured or not.
.1.3.6.1.4.1.4526.1.9.2.4.8.1.5,FSM7326-ROUTING-MIB::agentOspfRouteRedistMetricType,INTEGER,read-write,,current,externalType1(1):externalType2(2),Metric Type of routes,which OSPF redistributes from other source protocols. It can be 1(external type 1) or 2(external type 2).
.1.3.6.1.4.1.4526.1.9.2.4.8.1.6,FSM7326-ROUTING-MIB::agentOspfRouteRedistTag,Unsigned32,read-write,,current,,It specifies the tag field in routes redistributed by OSPF.
.1.3.6.1.4.1.4526.1.9.2.4.8.1.7,FSM7326-ROUTING-MIB::agentOspfRouteRedistSubnets,,read-write,,current,,If this value is false, then OSPF will not redistribute subnetted routes.
.1.3.6.1.4.1.4526.1.9.2.4.8.1.8,FSM7326-ROUTING-MIB::agentOspfRouteRedistDistList,Unsigned32,read-write,,current,,Access-list number of the access-list, which filters routes received from a source-protocol.
.1.3.6.1.4.1.4526.1.9.2.4.8.1.9,FSM7326-ROUTING-MIB::agentOspfRouteRedistDistListConfigured,,read-write,,current,,Flag to determine whether Access-list is configured or not.
.1.3.6.1.4.1.4526.1.9.2.4.9,FSM7326-ROUTING-MIB::agentOspfIfTable,,not-accessible,,current,,The OSPF Interface Table describes the inter- faces from the viewpoint of OSPF. Augments 
.1.3.6.1.4.1.4526.1.9.2.4.9.1,FSM7326-ROUTING-MIB::agentOspfIfEntry,,not-accessible,,current,,The OSPF Interface Entry describes one inter- face from the viewpoint of OSPF. Augments
.1.3.6.1.4.1.4526.1.9.2.4.9.1.1,FSM7326-ROUTING-MIB::agentOspfIfAuthKeyId,INTEGER,read-create,,current,,The identifier for the authentication key used on this interface. This field is only meaningful  when the OSPF-MIB ospfIfAuthType is md5(2); 
.1.3.6.1.4.1.4526.1.9.2.4.10,FSM7326-ROUTING-MIB::agentOspfVirtIfTable,,not-accessible,,current,,Information about this router's virtual inter- faces. Augments ospfVirtIfTable from the OSPF-MIB.
.1.3.6.1.4.1.4526.1.9.2.4.10.1,FSM7326-ROUTING-MIB::agentOspfVirtIfEntry,,not-accessible,,current,,Information about a single Virtual Interface.
.1.3.6.1.4.1.4526.1.9.2.4.10.1.1,FSM7326-ROUTING-MIB::agentOspfVirtIfAuthKeyId,INTEGER,read-create,,current,,The identifier for the authentication key used on this virtual interface. This field is only meaningful  when the OSPF-MIB ospfVirtIfAuthType is md5(2); 
.1.3.6.1.4.1.4526.1.9.2.4.11,FSM7326-ROUTING-MIB::agentRouterOspfRFC1583CompatibilityMode,INTEGER,read-write,,current,enable(1):disable(2),From RFC2328:  Controls the preference rules used in Section 16.4 when choosing among multiple AS-external-LSAs advertising the same destination. When set to 'enabled', the preference rules remain those specified by RFC 1583 ([Ref9]). When set to 'disabled', the preference rules are those stated in Section 16.4.1, which prevent routing loops when AS- external-LSAs for the same destination have been originated from different areas. Set to 'enabled' by default. In order to minimize the chance of routing loops, all OSPF routers in an OSPF routing domain should have RFC1583Compatibility set identically. When there are routers present that have not been updated with the functionality specified in Section 16.4.1 of this memo, all routers should have RFC1583Compatibility set to 'enabled'. Otherwise, all routers should have RFC1583Compatibility set to 'disabled', preventing all routing loops.
.1.3.6.1.4.1.4526.1.9.2.4.12,FSM7326-ROUTING-MIB::agentOspfAreaTable,,not-accessible,,current,,Information describing the additional configured  parameters and cumulative statistics of the router's attached areas.
.1.3.6.1.4.1.4526.1.9.2.4.12.1,FSM7326-ROUTING-MIB::agentOspfAreaEntry,,not-accessible,,current,,Information describing the additional configured  parameters and cumulative statistics of the router's attached areas.
.1.3.6.1.4.1.4526.1.9.2.4.12.1.2,FSM7326-ROUTING-MIB::agentOspfAuthType,Integer32,read-write,,current,,The authentication type specified for an area. Additional authentication types may be assigned locally on a per Area basis.
.1.3.6.1.4.1.4526.1.9.2.5,FSM7326-ROUTING-MIB::agentSnmpTrapFlagsConfigGroupLayer3,,,,,,
.1.3.6.1.4.1.4526.1.9.2.5.1,FSM7326-ROUTING-MIB::agentSnmpVRRPNewMasterTrapFlag,INTEGER,read-write,,current,enable(1):disable(2),This flag enables the sending of VRRP new master notification traps.
.1.3.6.1.4.1.4526.1.9.2.5.2,FSM7326-ROUTING-MIB::agentSnmpVRRPAuthFailureTrapFlag,INTEGER,read-write,,current,enable(1):disable(2),This flag enables the sending of VRRP authentication failure notification traps.
.1.3.6.1.4.1.4526.1.9.2.6,FSM7326-ROUTING-MIB::agentBootpDhcpRelayGroup,,,,,,
.1.3.6.1.4.1.4526.1.9.2.6.1,FSM7326-ROUTING-MIB::agentBootpDhcpRelayMaxHopCount,Integer32,read-write,,current,,The BOOTP/DHCP Max Hop Count. The relay agent silently discards BOOTREQUEST messages whose hops field exceeds the value 16  assuming that the request is looped through the intermediate agents. The default value is 4.
.1.3.6.1.4.1.4526.1.9.2.6.2,FSM7326-ROUTING-MIB::agentBootpDhcpRelayForwardingIp,IpAddress,read-write,,current,,The BOOTP/DHCP Server IP Address.  All the requests will be forwarded and the replies expected from this address.
.1.3.6.1.4.1.4526.1.9.2.6.3,FSM7326-ROUTING-MIB::agentBootpDhcpRelayForwardMode,INTEGER,read-write,,current,enable(1):disable(2),The BOOTP/DHCP Admin Mode.  The relaying functionality can be administratively enabled or disabled by this object
.1.3.6.1.4.1.4526.1.9.2.6.4,FSM7326-ROUTING-MIB::agentBootpDhcpRelayMinWaitTime,Integer32,read-write,,current,,The BOOTP/DHCP Minimum Wait Time.  When the BOOTP relay agent receives a BOOTREQUEST message, it MAY use the value of the 'secs'  (seconds since client began booting) field of the request as a factor in deciding whether to  relay the request or not.
.1.3.6.1.4.1.4526.1.9.2.6.5,FSM7326-ROUTING-MIB::agentBootpDhcpRelayCircuitIdOptionMode,INTEGER,read-write,,current,enable(1):disable(2),The BOOTP/DHCP Circuit ID Option Mode.  This flag is set to enable/disable the network element to add/remove the DHCP Relay agent Circuit ID sub-options.
.1.3.6.1.4.1.4526.1.9.2.6.6,FSM7326-ROUTING-MIB::agentBootpDhcpRelayNumOfRequestsReceived,Integer32,read-only,,current,,The Number of BOOTP/DHCP Requests Received.  Total number of BOOTREQUESTs received from all clients.
.1.3.6.1.4.1.4526.1.9.2.6.7,FSM7326-ROUTING-MIB::agentBootpDhcpRelayNumOfRequestsForwarded,Integer32,read-only,,current,,The Number of BOOTP/DHCP Requests Forwarded.  Total number of BOOTREQUESTs forwarded to the next agents/servers.
.1.3.6.1.4.1.4526.1.9.2.6.8,FSM7326-ROUTING-MIB::agentBootpDhcpRelayNumOfDiscards,Integer32,read-only,,current,,The Number of BOOTP/DHCP Discards.  Total number of packets discarded by the network element because of error in the packet.
.1.3.6.1.4.1.4526.1.9.3,FSM7326-QOS-MIB::fsm7326QOS,,,,,,
.1.3.6.1.4.1.4526.1.9.3.2,FSM7326-QOS-ACL-MIB::fsm7326QOSACL,,,,,,
.1.3.6.1.4.1.4526.1.9.3.2.1,FSM7326-QOS-ACL-MIB::aclTable,,not-accessible,,current,,A table of ACL instances.
.1.3.6.1.4.1.4526.1.9.3.2.1.1,FSM7326-QOS-ACL-MIB::aclEntry,,not-accessible,aclIndex,current,,
.1.3.6.1.4.1.4526.1.9.3.2.1.1.1,FSM7326-QOS-ACL-MIB::aclIndex,Integer32,not-accessible,,current,,The ACL index this instance is associated with.
.1.3.6.1.4.1.4526.1.9.3.2.1.1.3,FSM7326-QOS-ACL-MIB::aclStatus,INTEGER,read-create,,current,active(1):notInService(2):notReady(3):createAndGo(4):createAndWait(5):destroy(6),Status of this instance.  active(1) - this ACL instance is active createAndGo(4) - set to this value to create an instance destroy(6) - set to this value to delete an instance
.1.3.6.1.4.1.4526.1.9.3.2.2,FSM7326-QOS-ACL-MIB::aclIfTable,,not-accessible,,current,,A table of ACL interface instances.
.1.3.6.1.4.1.4526.1.9.3.2.2.1,FSM7326-QOS-ACL-MIB::aclIfEntry,,not-accessible,aclIndex:aclIfIndex:aclIfDirection,current,,
.1.3.6.1.4.1.4526.1.9.3.2.2.1.1,FSM7326-QOS-ACL-MIB::aclIfIndex,Integer32,not-accessible,,current,,The interface this ACL instance is associated with.
.1.3.6.1.4.1.4526.1.9.3.2.2.1.2,FSM7326-QOS-ACL-MIB::aclIfDirection,INTEGER,not-accessible,,current,inbound(1):outbound(2),The direction this ACL instance applies.
.1.3.6.1.4.1.4526.1.9.3.2.2.1.3,FSM7326-QOS-ACL-MIB::aclIfStatus,INTEGER,read-create,,current,active(1):notInService(2):notReady(3):createAndGo(4):createAndWait(5):destroy(6),Status of this instance.  active(1) - this ACL index instance is active createAndGo(4) - set to this value to assign an interface to an ACL destroy(6) - set to this value to remove an interface to an ACL
.1.3.6.1.4.1.4526.1.9.3.2.3,FSM7326-QOS-ACL-MIB::aclRuleTable,,not-accessible,,current,,A table of ACL Rules instances.
.1.3.6.1.4.1.4526.1.9.3.2.3.1,FSM7326-QOS-ACL-MIB::aclRuleEntry,,not-accessible,aclIndex:aclRuleIndex,current,,A table of ACL Classification Rules
.1.3.6.1.4.1.4526.1.9.3.2.3.1.1,FSM7326-QOS-ACL-MIB::aclRuleIndex,Integer32,not-accessible,,current,,The index of this instance.
.1.3.6.1.4.1.4526.1.9.3.2.3.1.2,FSM7326-QOS-ACL-MIB::aclRuleAction,INTEGER,read-create,,current,permit(1):deny(2),The type of action this rule should perform.
.1.3.6.1.4.1.4526.1.9.3.2.3.1.3,FSM7326-QOS-ACL-MIB::aclRuleProtocol,Integer32,read-create,,current,,icmp - 1 igmp - 2 ip - 4 tcp - 6 udp - 17 All values from 1 to 255 are valid.
.1.3.6.1.4.1.4526.1.9.3.2.3.1.4,FSM7326-QOS-ACL-MIB::aclRuleSrcIpAddress,IpAddress,read-create,,current,,The Source IP Address used in the ACL Classification.
.1.3.6.1.4.1.4526.1.9.3.2.3.1.5,FSM7326-QOS-ACL-MIB::aclRuleSrcIpMask,IpAddress,read-create,,current,,The Source IP Mask used in the ACL Classification.
.1.3.6.1.4.1.4526.1.9.3.2.3.1.6,FSM7326-QOS-ACL-MIB::aclRuleSrcL4Port,Integer32,read-create,,current,,The Source Port Number (Layer 4) used in the ACL Classification.
.1.3.6.1.4.1.4526.1.9.3.2.3.1.7,FSM7326-QOS-ACL-MIB::aclRuleSrcL4PortRangeStart,Integer32,read-create,,current,,The Source Port Number(Layer 4) range start.
.1.3.6.1.4.1.4526.1.9.3.2.3.1.8,FSM7326-QOS-ACL-MIB::aclRuleSrcL4PortRangeEnd,Integer32,read-create,,current,,The Source Port Number(Layer 4) range end.
.1.3.6.1.4.1.4526.1.9.3.2.3.1.9,FSM7326-QOS-ACL-MIB::aclRuleDestIpAddress,IpAddress,read-create,,current,,The Destination IP Address used in the ACL Classification.
.1.3.6.1.4.1.4526.1.9.3.2.3.1.10,FSM7326-QOS-ACL-MIB::aclRuleDestIpMask,IpAddress,read-create,,current,,The Destination IP Mask used in the ACL Classification.
.1.3.6.1.4.1.4526.1.9.3.2.3.1.11,FSM7326-QOS-ACL-MIB::aclRuleDestL4Port,Integer32,read-create,,current,,The Destination Port (Layer 4) used in ACl classification.
.1.3.6.1.4.1.4526.1.9.3.2.3.1.12,FSM7326-QOS-ACL-MIB::aclRuleDestL4PortRangeStart,Integer32,read-create,,current,,The Destination Port (Layer 4) starting range used in ACL classification.
.1.3.6.1.4.1.4526.1.9.3.2.3.1.13,FSM7326-QOS-ACL-MIB::aclRuleDestL4PortRangeEnd,Integer32,read-create,,current,,The Destination Port (Layer 4) ending range used in ACL classification.
.1.3.6.1.4.1.4526.1.9.3.2.3.1.14,FSM7326-QOS-ACL-MIB::aclRuleIPDSCP,Integer32,read-create,,current,,The Differentiated Services Code Point value.
.1.3.6.1.4.1.4526.1.9.3.2.3.1.15,FSM7326-QOS-ACL-MIB::aclRuleIpPrecedence,Integer32,read-create,,current,,The Type of Service (TOS) IP Precedence value.
.1.3.6.1.4.1.4526.1.9.3.2.3.1.16,FSM7326-QOS-ACL-MIB::aclRuleIpTosBits,Integer32,read-create,,current,,The Type of Service (TOS) Bits value.
.1.3.6.1.4.1.4526.1.9.3.2.3.1.17,FSM7326-QOS-ACL-MIB::aclRuleIpTosMask,Integer32,read-create,,current,,The Type of Service (TOS) Mask value.
.1.3.6.1.4.1.4526.1.9.3.2.3.1.18,FSM7326-QOS-ACL-MIB::aclRuleStatus,INTEGER,read-create,,current,active(1):notInService(2):notReady(3):createAndGo(4):createAndWait(5):destroy(6),Status of this instance.  active(1) - this ACL Rule is active createAndGo(4) - set to this value to create an instance destroy(6) - set to this value to delete an instance
.1.3.6.1.4.1.4526.1.9.3.3,FSM7326-QOS-DIFFSERV-EXTENSIONS-MIB::fsm7326QOSDiffServExtensions,,,,,,
.1.3.6.1.4.1.4526.1.9.3.3.1,FSM7326-QOS-DIFFSERV-EXTENSIONS-MIB::agentDiffServMIBObjects,,,,,,
.1.3.6.1.4.1.4526.1.9.3.3.1.1,FSM7326-QOS-DIFFSERV-EXTENSIONS-MIB::agentDiffServClassifier,,,,,,
.1.3.6.1.4.1.4526.1.9.3.3.1.1.1,FSM7326-QOS-DIFFSERV-EXTENSIONS-MIB::agentDiffServAuxMfClfrNextFree,Unsigned32,read-only,,current,,This object contains an unused value for agentDiffServAuxMfClfrId , or a zero to indicate that none exist.
.1.3.6.1.4.1.4526.1.9.3.3.1.1.2,FSM7326-QOS-DIFFSERV-EXTENSIONS-MIB::agentDiffServAuxMfClfrTable,,not-accessible,,current,,A table of Auxiliary Multi-field Classifier filter entries that a system may use to identify IP traffic.
.1.3.6.1.4.1.4526.1.9.3.3.1.1.2.1,FSM7326-QOS-DIFFSERV-EXTENSIONS-MIB::agentDiffServAuxMfClfrEntry,,not-accessible,agentDiffServAuxMfClfrId,current,,An IP Multi-field Classifier entry describes a single filter.
.1.3.6.1.4.1.4526.1.9.3.3.1.1.2.1.1,FSM7326-QOS-DIFFSERV-EXTENSIONS-MIB::agentDiffServAuxMfClfrId,Unsigned32,not-accessible,,current,,An index that enumerates the Auxiliary MultiField Classifier filter entries. Managers obtain new values for row creation in this table by reading agentDiffServAuxMfClfrNextFree.
.1.3.6.1.4.1.4526.1.9.3.3.1.1.2.1.2,FSM7326-QOS-DIFFSERV-EXTENSIONS-MIB::agentDiffServAuxMfClfrDstAddr,IpAddress,read-create,,current,,The IP address to match against the packet's destination IP address.
.1.3.6.1.4.1.4526.1.9.3.3.1.1.2.1.3,FSM7326-QOS-DIFFSERV-EXTENSIONS-MIB::agentDiffServAuxMfClfrDstMask,IpAddress,read-create,,current,,This mask value identifies the portion of agentDiffServAuxMfClfrDstAddr that is compared against a packet. 
.1.3.6.1.4.1.4526.1.9.3.3.1.1.2.1.4,FSM7326-QOS-DIFFSERV-EXTENSIONS-MIB::agentDiffServAuxMfClfrSrcAddr,IpAddress,read-create,,current,,The IP address to match against the packet's source IP address.
.1.3.6.1.4.1.4526.1.9.3.3.1.1.2.1.5,FSM7326-QOS-DIFFSERV-EXTENSIONS-MIB::agentDiffServAuxMfClfrSrcMask,IpAddress,read-create,,current,,This mask value identifies the portion of agentDiffServAuxMfClfrSrcAddr that is compared against a packet. 
.1.3.6.1.4.1.4526.1.9.3.3.1.1.2.1.6,FSM7326-QOS-DIFFSERV-EXTENSIONS-MIB::agentDiffServAuxMfClfrProtocol,Unsigned32,read-create,,current,,The IP protocol to match against the IPv4 protocol number. A value of 255 means match all. 
.1.3.6.1.4.1.4526.1.9.3.3.1.1.2.1.7,FSM7326-QOS-DIFFSERV-EXTENSIONS-MIB::agentDiffServAuxMfClfrDstL4PortMin,Unsigned32,read-create,,current,,The minimum value that the layer-4 destination port number in the packet must have in order to match this classifier entry. 
.1.3.6.1.4.1.4526.1.9.3.3.1.1.2.1.8,FSM7326-QOS-DIFFSERV-EXTENSIONS-MIB::agentDiffServAuxMfClfrDstL4PortMax,Unsigned32,read-create,,current,,The maximum value that the layer-4 destination port number in the  packet must have in order to match this classifier entry.  for this entry in agentDiffServAuxMfClfrDstL4PortMin. 
.1.3.6.1.4.1.4526.1.9.3.3.1.1.2.1.9,FSM7326-QOS-DIFFSERV-EXTENSIONS-MIB::agentDiffServAuxMfClfrSrcL4PortMin,Unsigned32,read-create,,current,,The minimum value that the layer-4 source port number in the packet must have in order to match this classifier entry. 
.1.3.6.1.4.1.4526.1.9.3.3.1.1.2.1.10,FSM7326-QOS-DIFFSERV-EXTENSIONS-MIB::agentDiffServAuxMfClfrSrcL4PortMax,Unsigned32,read-create,,current,,The maximum value that the layer-4 source port number in the packet must have in order to match this classifier entry. This value must be equal to or greater than the value specified for this entry in diffServMultiFieldClfrSrcL4PortMin. 
.1.3.6.1.4.1.4526.1.9.3.3.1.1.2.1.11,FSM7326-QOS-DIFFSERV-EXTENSIONS-MIB::agentDiffServAuxMfClfrCos,Integer32,read-create,,current,,Three-bit 802.1p priority field in the Ethernet frame used as
.1.3.6.1.4.1.4526.1.9.3.3.1.1.2.1.12,FSM7326-QOS-DIFFSERV-EXTENSIONS-MIB::agentDiffServAuxMfClfrTos,OCTET,read-create,,current,,IP TOS bits value, defined as all eight bits of the Service  Type octet in the IPv4 header. There are multiple, overlapping,  Precedence (bits 7-5): IP Precedence, values 0-7
.1.3.6.1.4.1.4526.1.9.3.3.1.1.2.1.13,FSM7326-QOS-DIFFSERV-EXTENSIONS-MIB::agentDiffServAuxMfClfrTosMask,OCTET,read-create,,current,,IP TOS bits mask value. It identifies the portion of  agentDiffServAuxMfClfrTos that is compared against a packet.  There are multiple, overlapping meanings of the TOS octet in use today. Precedence (bits 7-5): 224 (bit mask '11100000') Other mask values are also permitted.
.1.3.6.1.4.1.4526.1.9.3.3.1.1.2.1.14,FSM7326-QOS-DIFFSERV-EXTENSIONS-MIB::agentDiffServAuxMfClfrDstMac,OCTET,read-create,,current,,Destination MAC address. 
.1.3.6.1.4.1.4526.1.9.3.3.1.1.2.1.15,FSM7326-QOS-DIFFSERV-EXTENSIONS-MIB::agentDiffServAuxMfClfrDstMacMask,OCTET,read-create,,current,,Destination MAC address mask value. This mask value identifies the portion of agentDiffServAuxMfClfrDstMac 
.1.3.6.1.4.1.4526.1.9.3.3.1.1.2.1.16,FSM7326-QOS-DIFFSERV-EXTENSIONS-MIB::agentDiffServAuxMfClfrSrcMac,OCTET,read-create,,current,,Source MAC address. 
.1.3.6.1.4.1.4526.1.9.3.3.1.1.2.1.17,FSM7326-QOS-DIFFSERV-EXTENSIONS-MIB::agentDiffServAuxMfClfrSrcMacMask,OCTET,read-create,,current,,Source MAC address mask value. This mask value identifies the portion of agentDiffServAuxMfClfrSrcMac 
.1.3.6.1.4.1.4526.1.9.3.3.1.1.2.1.18,FSM7326-QOS-DIFFSERV-EXTENSIONS-MIB::agentDiffServAuxMfClfrVlanId,Integer32,read-create,,current,,VLAN ID value for the classifier. A value of -1 indicates that  a specific VLAN ID value has not been defined and thus all  VLAN ID values are considered a match.
.1.3.6.1.4.1.4526.1.9.3.3.1.1.2.1.19,FSM7326-QOS-DIFFSERV-EXTENSIONS-MIB::agentDiffServAuxMfClfrStorage,INTEGER,read-create,,current,other(1):volatile(2):nonVolatile(3):permanent(4):readOnly(5),The storage type for this conceptual row. 
.1.3.6.1.4.1.4526.1.9.3.3.1.1.2.1.20,FSM7326-QOS-DIFFSERV-EXTENSIONS-MIB::agentDiffServAuxMfClfrStatus,INTEGER,read-create,,current,active(1):notInService(2):notReady(3):createAndGo(4):createAndWait(5):destroy(6),The status of this conceptual row.
.1.3.6.1.4.1.4526.1.9.3.3.1.2,FSM7326-QOS-DIFFSERV-EXTENSIONS-MIB::agentDiffServAction,,,,,,
.1.3.6.1.4.1.4526.1.9.3.3.1.2.2,FSM7326-QOS-DIFFSERV-EXTENSIONS-MIB::agentDiffServCosMarkActTable,,not-accessible,,current,,This table enumerates specific Class of Service values used for marking or remarking the priority bits in the 802.1p header. The entries of this  table may be referenced by a diffServActionSpecific attribute.
.1.3.6.1.4.1.4526.1.9.3.3.1.2.2.1,FSM7326-QOS-DIFFSERV-EXTENSIONS-MIB::agentDiffServCosMarkActEntry,,not-accessible,agentDiffServCosMarkActCos,current,,An entry in the COS mark action table that describes a single Class of Service value used for marking.
.1.3.6.1.4.1.4526.1.9.3.3.1.2.2.1.1,FSM7326-QOS-DIFFSERV-EXTENSIONS-MIB::agentDiffServCosMarkActCos,Integer32,read-only,,current,,The Class of Service value that this Action will store into the priority bits of the 802.1p header. It is quite possible that the  only packets subject to this Action are already marked with this COS  value. COS packet marking occurs upon egress from the network node.
.1.3.6.1.4.1.4526.1.9.3.3.1.2.4,FSM7326-QOS-DIFFSERV-EXTENSIONS-MIB::agentDiffServIpPrecMarkActTable,,not-accessible,,current,,This table enumerates specific IP Precedence values used for marking or remarking the Precedence field of IP packets. The entries of this  table may be referenced by a diffServActionSpecific attribute.
.1.3.6.1.4.1.4526.1.9.3.3.1.2.4.1,FSM7326-QOS-DIFFSERV-EXTENSIONS-MIB::agentDiffServIpPrecMarkActEntry,,not-accessible,agentDiffServIpPrecMarkActPrecedence,current,,An entry in the IP Precedence mark action table that describes a single IP Precedence value used for marking.
.1.3.6.1.4.1.4526.1.9.3.3.1.2.4.1.1,FSM7326-QOS-DIFFSERV-EXTENSIONS-MIB::agentDiffServIpPrecMarkActPrecedence,Integer32,read-only,,current,,The IP Precedence that this Action will store into the Precedence field of the IP packet. It is quite possible that the only packets  subject to this Action are already marked with this IP Precedence.  Note also that Differentiated Services processing may result in a packet being marked on both ingress to a network and on egress from  it, and that ingress and egress can occur in the same router.
.1.3.6.1.4.1.4526.1.9.3.4,FSM7326-QOS-DIFFSERV-PRIVATE-MIB::fsm7326QOSDiffServPrivate,,,,,,
.1.3.6.1.4.1.4526.1.9.3.4.1,FSM7326-QOS-DIFFSERV-PRIVATE-MIB::agentDiffServGenStatusGroup,,,,,,
.1.3.6.1.4.1.4526.1.9.3.4.1.1,FSM7326-QOS-DIFFSERV-PRIVATE-MIB::agentDiffServGenStatusAdminMode,INTEGER,read-write,,current,enable(1):disable(2), DiffServ Admin Mode
.1.3.6.1.4.1.4526.1.9.3.4.1.2,FSM7326-QOS-DIFFSERV-PRIVATE-MIB::agentDiffServGenStatusClassTableSize,Unsigned32,read-only,,current,, Current size of the Class Table
.1.3.6.1.4.1.4526.1.9.3.4.1.3,FSM7326-QOS-DIFFSERV-PRIVATE-MIB::agentDiffServGenStatusClassTableMax,Unsigned32,read-only,,current,, Max size of the Class Table
.1.3.6.1.4.1.4526.1.9.3.4.1.4,FSM7326-QOS-DIFFSERV-PRIVATE-MIB::agentDiffServGenStatusClassRuleTableSize,Unsigned32,read-only,,current,, Current size of Class Rule Table
.1.3.6.1.4.1.4526.1.9.3.4.1.5,FSM7326-QOS-DIFFSERV-PRIVATE-MIB::agentDiffServGenStatusClassRuleTableMax,Unsigned32,read-only,,current,, Max size of the Class Rule Table.
.1.3.6.1.4.1.4526.1.9.3.4.1.6,FSM7326-QOS-DIFFSERV-PRIVATE-MIB::agentDiffServGenStatusPolicyTableSize,Unsigned32,read-only,,current,, Current Size of the Policy Table.
.1.3.6.1.4.1.4526.1.9.3.4.1.7,FSM7326-QOS-DIFFSERV-PRIVATE-MIB::agentDiffServGenStatusPolicyTableMax,Unsigned32,read-only,,current,, Max size of the Policy Table
.1.3.6.1.4.1.4526.1.9.3.4.1.8,FSM7326-QOS-DIFFSERV-PRIVATE-MIB::agentDiffServGenStatusPolicyInstTableSize,Unsigned32,read-only,,current,, Current size of the Policy-Class Instance Table
.1.3.6.1.4.1.4526.1.9.3.4.1.9,FSM7326-QOS-DIFFSERV-PRIVATE-MIB::agentDiffServGenStatusPolicyInstTableMax,Unsigned32,read-only,,current,, Max size of the Policy-Class Instance Table
.1.3.6.1.4.1.4526.1.9.3.4.1.10,FSM7326-QOS-DIFFSERV-PRIVATE-MIB::agentDiffServGenStatusPolicyAttrTableSize,Unsigned32,read-only,,current,, Current size of the Policy Attribute Table
.1.3.6.1.4.1.4526.1.9.3.4.1.11,FSM7326-QOS-DIFFSERV-PRIVATE-MIB::agentDiffServGenStatusPolicyAttrTableMax,Unsigned32,read-only,,current,, Max size of the Policy Attribute Table
.1.3.6.1.4.1.4526.1.9.3.4.1.12,FSM7326-QOS-DIFFSERV-PRIVATE-MIB::agentDiffServGenStatusServiceTableSize,Unsigned32,read-only,,current,, Current size of the Service Table
.1.3.6.1.4.1.4526.1.9.3.4.1.13,FSM7326-QOS-DIFFSERV-PRIVATE-MIB::agentDiffServGenStatusServiceTableMax,Unsigned32,read-only,,current,, Max size of the Service Table
.1.3.6.1.4.1.4526.1.9.3.4.2,FSM7326-QOS-DIFFSERV-PRIVATE-MIB::agentDiffServClassGroup,,,,,,
.1.3.6.1.4.1.4526.1.9.3.4.2.1,FSM7326-QOS-DIFFSERV-PRIVATE-MIB::agentDiffServClassIndexNextFree,Unsigned32,read-only,,current,,This object contains an unused value for classIndex, or a
.1.3.6.1.4.1.4526.1.9.3.4.2.2,FSM7326-QOS-DIFFSERV-PRIVATE-MIB::agentDiffServClassTable,,not-accessible,,current,,A table of the DiffServ class entries
.1.3.6.1.4.1.4526.1.9.3.4.2.2.1,FSM7326-QOS-DIFFSERV-PRIVATE-MIB::agentDiffServClassEntry,,not-accessible,agentDiffServClassIndex,current,,Represents entry for a DiffServ traffic class
.1.3.6.1.4.1.4526.1.9.3.4.2.2.1.1,FSM7326-QOS-DIFFSERV-PRIVATE-MIB::agentDiffServClassIndex,Unsigned32,not-accessible,,current,,The identifier for DiffServ Class entry 
.1.3.6.1.4.1.4526.1.9.3.4.2.2.1.2,FSM7326-QOS-DIFFSERV-PRIVATE-MIB::agentDiffServClassName,OCTET,read-create,,current,,Name of the DiffServ traffic class
.1.3.6.1.4.1.4526.1.9.3.4.2.2.1.3,FSM7326-QOS-DIFFSERV-PRIVATE-MIB::agentDiffServClassType,INTEGER,read-create,,current,all(1):any(2):acl(3),The class type indicates how the individual class match 
.1.3.6.1.4.1.4526.1.9.3.4.2.2.1.4,FSM7326-QOS-DIFFSERV-PRIVATE-MIB::agentDiffServClassAclNum,Unsigned32,read-create,,current,,The access list number used to define the match conditions for the  DiffServ class.
.1.3.6.1.4.1.4526.1.9.3.4.2.2.1.5,FSM7326-QOS-DIFFSERV-PRIVATE-MIB::agentDiffServClassRuleIndexNextFree,Unsigned32,read-only,,current,,This object contains an unused value for classRuleIndex, or a
.1.3.6.1.4.1.4526.1.9.3.4.2.2.1.6,FSM7326-QOS-DIFFSERV-PRIVATE-MIB::agentDiffServClassStorageType,INTEGER,read-create,,current,other(1):volatile(2):nonVolatile(3):permanent(4):readOnly(5),Storage-type for this conceptual row
.1.3.6.1.4.1.4526.1.9.3.4.2.2.1.7,FSM7326-QOS-DIFFSERV-PRIVATE-MIB::agentDiffServClassRowStatus,INTEGER,read-create,,current,active(1):notInService(2):notReady(3):createAndGo(4):createAndWait(5):destroy(6),The status of this conceptual row.
.1.3.6.1.4.1.4526.1.9.3.4.2.3,FSM7326-QOS-DIFFSERV-PRIVATE-MIB::agentDiffServClassRuleTable,,not-accessible,,current,,A table of the DiffServ Class Rule entries
.1.3.6.1.4.1.4526.1.9.3.4.2.3.1,FSM7326-QOS-DIFFSERV-PRIVATE-MIB::agentDiffServClassRuleEntry,,not-accessible,agentDiffServClassIndex:agentDiffServClassRuleIndex,current,,Represents entry for a set of class-match rules
.1.3.6.1.4.1.4526.1.9.3.4.2.3.1.1,FSM7326-QOS-DIFFSERV-PRIVATE-MIB::agentDiffServClassRuleIndex,Unsigned32,not-accessible,,current,,The identifier for DiffServ Class Rule Table entry within a class
.1.3.6.1.4.1.4526.1.9.3.4.2.3.1.2,FSM7326-QOS-DIFFSERV-PRIVATE-MIB::agentDiffServClassRuleMatchEntryType,INTEGER,read-create,,current,cos(1):dstip(2):dstl4port(3):dstmac(4):every(5):ipdscp(6):ipprecedence(7):iptos(8):protocol(9):refclass(10):srcip(11):srcl4port(12):srcmac(13):vlan(14),Class Rule match entry type, it determines which one of the individual  match conditions is defined for the present class rule. This object must be created before any other match object in this row.
.1.3.6.1.4.1.4526.1.9.3.4.2.3.1.3,FSM7326-QOS-DIFFSERV-PRIVATE-MIB::agentDiffServClassRuleMatchCos,Unsigned32,read-create,,current,,Three-bit 802.1p priority field in the Ethernet frame used as agentDiffServClassRuleMatchEntryType is set to cos(1).
.1.3.6.1.4.1.4526.1.9.3.4.2.3.1.4,FSM7326-QOS-DIFFSERV-PRIVATE-MIB::agentDiffServClassRuleMatchDstIpAddr,IpAddress,read-create,,current,,Destination IP address match value for the class - only valid if the 
.1.3.6.1.4.1.4526.1.9.3.4.2.3.1.5,FSM7326-QOS-DIFFSERV-PRIVATE-MIB::agentDiffServClassRuleMatchDstIpMask,IpAddress,read-create,,current,,Destination IP address mask match value for the class - only valid if the  compared against a packet. A non-contiguous mask value is permitted.
.1.3.6.1.4.1.4526.1.9.3.4.2.3.1.6,FSM7326-QOS-DIFFSERV-PRIVATE-MIB::agentDiffServClassRuleMatchDstL4PortStart,Unsigned32,read-create,,current,,Destination layer 4 port range start match value for the class - only  valid if the agentDiffServClassRuleMatchEntryType is set to dstl4port(3).
.1.3.6.1.4.1.4526.1.9.3.4.2.3.1.7,FSM7326-QOS-DIFFSERV-PRIVATE-MIB::agentDiffServClassRuleMatchDstL4PortEnd,Unsigned32,read-create,,current,,Destination layer 4 port range end match value for the class - only valid if the agentDiffServClassRuleMatchEntryType is set to dstl4port(3).
.1.3.6.1.4.1.4526.1.9.3.4.2.3.1.8,FSM7326-QOS-DIFFSERV-PRIVATE-MIB::agentDiffServClassRuleMatchDstMacAddr,OCTET,read-create,,current,,Destination MAC address match value for the class - only valid if the 
.1.3.6.1.4.1.4526.1.9.3.4.2.3.1.9,FSM7326-QOS-DIFFSERV-PRIVATE-MIB::agentDiffServClassRuleMatchDstMacMask,OCTET,read-create,,current,,Destination MAC address mask match value for the class - only valid if the  compared against a packet. A non-contiguous mask value is permitted.
.1.3.6.1.4.1.4526.1.9.3.4.2.3.1.10,FSM7326-QOS-DIFFSERV-PRIVATE-MIB::agentDiffServClassRuleMatchEvery,INTEGER,read-only,,current,true(1):false(2),Flag to indicate that the class rule is defined to match on every packet,  regardless of content. - only valid if the  agentDiffServClassRuleMatchEntryType is set to every(5).
.1.3.6.1.4.1.4526.1.9.3.4.2.3.1.11,FSM7326-QOS-DIFFSERV-PRIVATE-MIB::agentDiffServClassRuleMatchIpDscp,Unsigned32,read-create,,current,,IP DiffServ Code Point (DSCP) match value for the class - only valid if  the agentDiffServClassRuleMatchEntryType is set to ipdscp(6). The DSCP  IPv4 header.
.1.3.6.1.4.1.4526.1.9.3.4.2.3.1.12,FSM7326-QOS-DIFFSERV-PRIVATE-MIB::agentDiffServClassRuleMatchIpPrecedence,Unsigned32,read-create,,current,,IP Precedence match value for the class - only valid if the 
.1.3.6.1.4.1.4526.1.9.3.4.2.3.1.13,FSM7326-QOS-DIFFSERV-PRIVATE-MIB::agentDiffServClassRuleMatchIpTosBits,OCTET,read-create,,current,,IP TOS bits match value for the class - only valid if the 
.1.3.6.1.4.1.4526.1.9.3.4.2.3.1.14,FSM7326-QOS-DIFFSERV-PRIVATE-MIB::agentDiffServClassRuleMatchIpTosMask,OCTET,read-create,,current,,IP TOS bits mask match value for the class - only valid if the 
.1.3.6.1.4.1.4526.1.9.3.4.2.3.1.15,FSM7326-QOS-DIFFSERV-PRIVATE-MIB::agentDiffServClassRuleMatchProtocolNum,Unsigned32,read-create,,current,,Protocol number match value for the class - only valid if the 
.1.3.6.1.4.1.4526.1.9.3.4.2.3.1.16,FSM7326-QOS-DIFFSERV-PRIVATE-MIB::agentDiffServClassRuleMatchRefClassIndex,Unsigned32,read-create,,current,,Index of the corresponding referenced class - only valid if the 
.1.3.6.1.4.1.4526.1.9.3.4.2.3.1.17,FSM7326-QOS-DIFFSERV-PRIVATE-MIB::agentDiffServClassRuleMatchSrcIpAddr,IpAddress,read-create,,current,,Source IP address match value for the class - only valid if the 
.1.3.6.1.4.1.4526.1.9.3.4.2.3.1.18,FSM7326-QOS-DIFFSERV-PRIVATE-MIB::agentDiffServClassRuleMatchSrcIpMask,IpAddress,read-create,,current,,Source IP address mask match value for the class - only valid if the 
.1.3.6.1.4.1.4526.1.9.3.4.2.3.1.19,FSM7326-QOS-DIFFSERV-PRIVATE-MIB::agentDiffServClassRuleMatchSrcL4PortStart,Unsigned32,read-create,,current,,Source layer 4 port range start match value for the class - only valid if  the agentDiffServClassRuleMatchEntryType is set to srcl4port(12).
.1.3.6.1.4.1.4526.1.9.3.4.2.3.1.20,FSM7326-QOS-DIFFSERV-PRIVATE-MIB::agentDiffServClassRuleMatchSrcL4PortEnd,Unsigned32,read-create,,current,,Source layer 4 port range end match value for the class - only valid if  the agentDiffServClassRuleMatchEntryType is set to srcl4port(12).
.1.3.6.1.4.1.4526.1.9.3.4.2.3.1.21,FSM7326-QOS-DIFFSERV-PRIVATE-MIB::agentDiffServClassRuleMatchSrcMacAddr,OCTET,read-create,,current,,Source MAC address match value for the class - only valid if the 
.1.3.6.1.4.1.4526.1.9.3.4.2.3.1.22,FSM7326-QOS-DIFFSERV-PRIVATE-MIB::agentDiffServClassRuleMatchSrcMacMask,OCTET,read-create,,current,,Source MAC address mask match value for the class - only valid if the 
.1.3.6.1.4.1.4526.1.9.3.4.2.3.1.23,FSM7326-QOS-DIFFSERV-PRIVATE-MIB::agentDiffServClassRuleMatchVlanId,Unsigned32,read-create,,current,,VLAN ID match value for the class - only valid if the 
.1.3.6.1.4.1.4526.1.9.3.4.2.3.1.24,FSM7326-QOS-DIFFSERV-PRIVATE-MIB::agentDiffServClassRuleMatchExcludeFlag,INTEGER,read-create,,current,true(1):false(2),Class Rule exclude flag - when set to true(1), the match condition  identified by agentDiffServClassRuleMatchEntryType is negated. This means that for a given field, every value is considered to be a match EXCEPT for  the value specified in the class rule. This flag must be false(2) for an  agendDiffServClassRuleMatchEntryType of refClass(10). object, but before any other match object in this row
.1.3.6.1.4.1.4526.1.9.3.4.2.3.1.25,FSM7326-QOS-DIFFSERV-PRIVATE-MIB::agentDiffServClassRuleStorageType,INTEGER,read-create,,current,other(1):volatile(2):nonVolatile(3):permanent(4):readOnly(5),Storage-type for this conceptual row
.1.3.6.1.4.1.4526.1.9.3.4.2.3.1.26,FSM7326-QOS-DIFFSERV-PRIVATE-MIB::agentDiffServClassRuleRowStatus,INTEGER,read-create,,current,active(1):notInService(2):notReady(3):createAndGo(4):createAndWait(5):destroy(6),The status of this conceptual row.
.1.3.6.1.4.1.4526.1.9.3.4.3,FSM7326-QOS-DIFFSERV-PRIVATE-MIB::agentDiffServPolicyGroup,,,,,,
.1.3.6.1.4.1.4526.1.9.3.4.3.1,FSM7326-QOS-DIFFSERV-PRIVATE-MIB::agentDiffServPolicyIndexNextFree,Unsigned32,read-only,,current,,This object contains an unused value for agentDiffServPolicyIndex, or a
.1.3.6.1.4.1.4526.1.9.3.4.3.2,FSM7326-QOS-DIFFSERV-PRIVATE-MIB::agentDiffServPolicyTable,,not-accessible,,current,,A table of the DiffServ policy entries.
.1.3.6.1.4.1.4526.1.9.3.4.3.2.1,FSM7326-QOS-DIFFSERV-PRIVATE-MIB::agentDiffServPolicyEntry,,not-accessible,agentDiffServPolicyIndex,current,,Represents entry for a DiffServ policy.
.1.3.6.1.4.1.4526.1.9.3.4.3.2.1.1,FSM7326-QOS-DIFFSERV-PRIVATE-MIB::agentDiffServPolicyIndex,Unsigned32,not-accessible,,current,,The identifier for DiffServ Policy table entry.
.1.3.6.1.4.1.4526.1.9.3.4.3.2.1.2,FSM7326-QOS-DIFFSERV-PRIVATE-MIB::agentDiffServPolicyName,OCTET,read-create,,current,,Name of the policy
.1.3.6.1.4.1.4526.1.9.3.4.3.2.1.3,FSM7326-QOS-DIFFSERV-PRIVATE-MIB::agentDiffServPolicyType,INTEGER,read-create,,current,in(1):out(2), The policy type dictates whether inbound or outbound policy attribute statements are used in the policy definition.
.1.3.6.1.4.1.4526.1.9.3.4.3.2.1.4,FSM7326-QOS-DIFFSERV-PRIVATE-MIB::agentDiffServPolicyInstIndexNextFree,Unsigned32,read-only,,current,,This object contains an unused value for agentDiffServPolicyInstIndex, or  a zero to indicate that none exists. This index is maintained on a  per-policy basis.
.1.3.6.1.4.1.4526.1.9.3.4.3.2.1.5,FSM7326-QOS-DIFFSERV-PRIVATE-MIB::agentDiffServPolicyStorageType,INTEGER,read-create,,current,other(1):volatile(2):nonVolatile(3):permanent(4):readOnly(5),Storage-type for this conceptual row
.1.3.6.1.4.1.4526.1.9.3.4.3.2.1.6,FSM7326-QOS-DIFFSERV-PRIVATE-MIB::agentDiffServPolicyRowStatus,INTEGER,read-create,,current,active(1):notInService(2):notReady(3):createAndGo(4):createAndWait(5):destroy(6),The status of this conceptual row.
.1.3.6.1.4.1.4526.1.9.3.4.3.3,FSM7326-QOS-DIFFSERV-PRIVATE-MIB::agentDiffServPolicyInstTable,,not-accessible,,current,,A table of the policy-class instance entries.
.1.3.6.1.4.1.4526.1.9.3.4.3.3.1,FSM7326-QOS-DIFFSERV-PRIVATE-MIB::agentDiffServPolicyInstEntry,,not-accessible,agentDiffServPolicyIndex:agentDiffServPolicyInstIndex,current,,Represents entry for a policy-class instance.
.1.3.6.1.4.1.4526.1.9.3.4.3.3.1.1,FSM7326-QOS-DIFFSERV-PRIVATE-MIB::agentDiffServPolicyInstIndex,Unsigned32,not-accessible,,current,,The identifier for policy-class Instance table entry within a policy.
.1.3.6.1.4.1.4526.1.9.3.4.3.3.1.2,FSM7326-QOS-DIFFSERV-PRIVATE-MIB::agentDiffServPolicyInstClassIndex,Unsigned32,read-create,,current,,Index of the DiffServ Class Table row, whose class definition is used class (instance) to a policy.
.1.3.6.1.4.1.4526.1.9.3.4.3.3.1.3,FSM7326-QOS-DIFFSERV-PRIVATE-MIB::agentDiffServPolicyInstAttrIndexNextFree,Unsigned32,read-only,,current,,This object contains an unused value for agentDiffServPolicyAttrIndex, or  a zero to indicate that none exists. This index is maintained on a  per-policy-class-instance basis.
.1.3.6.1.4.1.4526.1.9.3.4.3.3.1.4,FSM7326-QOS-DIFFSERV-PRIVATE-MIB::agentDiffServPolicyInstStorageType,INTEGER,read-create,,current,other(1):volatile(2):nonVolatile(3):permanent(4):readOnly(5),Storage-type for this conceptual row.
.1.3.6.1.4.1.4526.1.9.3.4.3.3.1.5,FSM7326-QOS-DIFFSERV-PRIVATE-MIB::agentDiffServPolicyInstRowStatus,INTEGER,read-create,,current,active(1):notInService(2):notReady(3):createAndGo(4):createAndWait(5):destroy(6),The status of this conceptual row.
.1.3.6.1.4.1.4526.1.9.3.4.3.4,FSM7326-QOS-DIFFSERV-PRIVATE-MIB::agentDiffServPolicyAttrTable,,not-accessible,,current,,A table of policy attribute entries
.1.3.6.1.4.1.4526.1.9.3.4.3.4.1,FSM7326-QOS-DIFFSERV-PRIVATE-MIB::agentDiffServPolicyAttrEntry,,not-accessible,agentDiffServPolicyIndex:agentDiffServPolicyInstIndex:agentDiffServPolicyAttrIndex,current,,Represents entry for policy attributes
.1.3.6.1.4.1.4526.1.9.3.4.3.4.1.1,FSM7326-QOS-DIFFSERV-PRIVATE-MIB::agentDiffServPolicyAttrIndex,Unsigned32,not-accessible,,current,,The identifier for policy-attribute entry 
.1.3.6.1.4.1.4526.1.9.3.4.3.4.1.2,FSM7326-QOS-DIFFSERV-PRIVATE-MIB::agentDiffServPolicyAttrStmtEntryType,INTEGER,read-create,,current,bandwidth(1):expedite(2):markCosVal(3):markIpDscpVal(4):markIpPrecedenceVal(5):policeSimple(6):policeSinglerate(7):policeTworate(8):randomdrop(9):shapeAverage(10):shapePeak(11),Policy attribute statement entry type -- this entry type is  created before any other policy attribute statement object in the row. The markIpDscpVal(4), markIpPrecedenceVal(5), policeSimple(6),  policeSinglerate(7) and policeTworate(8) values are only allowed for an  agentDiffServPolicyType of in(1). The remaining values are only allowed  for an agentDiffServPolicyType of out(2).
.1.3.6.1.4.1.4526.1.9.3.4.3.4.1.3,FSM7326-QOS-DIFFSERV-PRIVATE-MIB::agentDiffServPolicyAttrStmtBandwidthCrate,Unsigned32,read-create,,current,,Bandwidth committed rate attribute statement value -- identifies 
.1.3.6.1.4.1.4526.1.9.3.4.3.4.1.4,FSM7326-QOS-DIFFSERV-PRIVATE-MIB::agentDiffServPolicyAttrStmtBandwidthCrateUnits,INTEGER,read-create,,current,kbps(1):percentage(2),Bandwidth committed rate units attribute statement value -- this value  agentDiffServPolicyAttrStmtBandwidthCrate object as either  kilobits-per-second or as a percentage of interface link speed. This  attribute is only valid if the value of  agentDiffServPolicyAttrStmtEntryType is set to bandwidth(1).
.1.3.6.1.4.1.4526.1.9.3.4.3.4.1.5,FSM7326-QOS-DIFFSERV-PRIVATE-MIB::agentDiffServPolicyAttrStmtExpediteCrate,Unsigned32,read-create,,current,,Expedited (bandwidth) committed rate attribute statement value -- it  identifies the maximum guaranteed amount of bandwidth to be reserved for  the specified class instance within the policy. This attribute is only  valid if the value of agentDiffServPolicyAttrStmtEntryType is set to  expedite(2). 
.1.3.6.1.4.1.4526.1.9.3.4.3.4.1.6,FSM7326-QOS-DIFFSERV-PRIVATE-MIB::agentDiffServPolicyAttrStmtExpediteCrateUnits,INTEGER,read-create,,current,kbps(1):percentage(2),Expedited (bandwidth) committed rate units attribute statement value  agentDiffServPolicyAttrStmtExpediteCrate object as either  kilobits-per-second or as a percentage of interface link speed. This  attribute is only valid if the value of  agentDiffServPolicyAttrStmtEntryType is set to expedite(2).
.1.3.6.1.4.1.4526.1.9.3.4.3.4.1.7,FSM7326-QOS-DIFFSERV-PRIVATE-MIB::agentDiffServPolicyAttrStmtExpediteCburst,Unsigned32,read-create,,current,,Expedited (bandwidth) committed burst size attribute statement value, 
.1.3.6.1.4.1.4526.1.9.3.4.3.4.1.8,FSM7326-QOS-DIFFSERV-PRIVATE-MIB::agentDiffServPolicyAttrStmtMarkCosVal,Unsigned32,read-create,,current,,Three-bit 802.1p priority(CoS) value as part of the outbound policy for a  class instance. This attribute is only valid if the value of  agentDiffServPolicyAttrStmtEntryType is set to markCosVal(3).
.1.3.6.1.4.1.4526.1.9.3.4.3.4.1.9,FSM7326-QOS-DIFFSERV-PRIVATE-MIB::agentDiffServPolicyAttrStmtMarkIpDscpVal,Unsigned32,read-create,,current,,Specified IP DSCP value to mark in all inbound packets belonging to the  class-instance. This attribute is only valid if the value of  agentDiffServPolicyAttrStmtEntryType is set to markIpDscpVal(4).
.1.3.6.1.4.1.4526.1.9.3.4.3.4.1.10,FSM7326-QOS-DIFFSERV-PRIVATE-MIB::agentDiffServPolicyAttrStmtMarkIpPrecedenceVal,Unsigned32,read-create,,current,,Specified IP Precedence value to mark in all inbound packets belonging to  the class-instance. This attribute is only valid if the value of  agentDiffServPolicyAttrStmtEntryType is set to markIpPrecedenceVal(5).
.1.3.6.1.4.1.4526.1.9.3.4.3.4.1.11,FSM7326-QOS-DIFFSERV-PRIVATE-MIB::agentDiffServPolicyAttrStmtPoliceConformAct,INTEGER,read-create,,current,drop(1):markdscp(2):markprec(3):send(4),Policing conform action attribute statement value -- determines  agentDiffServPolicyAttrStmtEntryType is policeSimple(6),  policeSinglerate(7), or policeTworate(8).
.1.3.6.1.4.1.4526.1.9.3.4.3.4.1.12,FSM7326-QOS-DIFFSERV-PRIVATE-MIB::agentDiffServPolicyAttrStmtPoliceConformVal,Unsigned32,read-create,,current,,Policing conform DSCP or IP Precedence value attribute statement value --  used to mark the DSCP or IP Precedence field of conforming packets when  the conform action is markdscp(2) or markprec(3), respectively. This  attribute is only valid if the value of  agentDiffServPolicyAttrStmtEntryType is policeSimple(6),  policeSinglerate(7), or policeTworate(8).
.1.3.6.1.4.1.4526.1.9.3.4.3.4.1.13,FSM7326-QOS-DIFFSERV-PRIVATE-MIB::agentDiffServPolicyAttrStmtPoliceExceedAct,INTEGER,read-create,,current,drop(1):markdscp(2):markprec(3):send(4),Policing exceed action attribute statement value -- determines  tworate) currently configured for the specified class instance within the  policy. The default exceed action is drop(1). This attribute is only  valid if the value of agentDiffServPolicyAttrStmtEntryType is  policeSinglerate(7) or policeTworate(8).
.1.3.6.1.4.1.4526.1.9.3.4.3.4.1.14,FSM7326-QOS-DIFFSERV-PRIVATE-MIB::agentDiffServPolicyAttrStmtPoliceExceedVal,Unsigned32,read-create,,current,,Policing exceed DSCP or IP Precedence value attribute statement value --  used to mark the DSCP or IP Precedence field of excess packets when the  exceed action is markdscp(2) or markprec(3), respectively. This attribute  is only valid if the value of agentDiffServPolicyAttrStmtEntryType is  policeSinglerate(7) or policeTworate(8).
.1.3.6.1.4.1.4526.1.9.3.4.3.4.1.15,FSM7326-QOS-DIFFSERV-PRIVATE-MIB::agentDiffServPolicyAttrStmtPoliceNonconformAct,INTEGER,read-create,,current,drop(1):markdscp(2):markprec(3):send(4),Policing non-conform action attribute statement value -- determines the  action taken on nonconforming traffic for the policing style (simple,  singlerate,tworate) currently configured for the specified class instance  attribute is only valid if the value of  agentDiffServPolicyAttrStmtEntryType is policeSimple(6),  policeSinglerate(7), or policeTworate(8).
.1.3.6.1.4.1.4526.1.9.3.4.3.4.1.16,FSM7326-QOS-DIFFSERV-PRIVATE-MIB::agentDiffServPolicyAttrStmtPoliceNonconformVal,Unsigned32,read-create,,current,,Policing non-conform DSCP or IP Precedence value attribute statement value -- used to mark the DSCP or IP Precedence field of nonconforming packets  when the nonconform action is markdscp(2) or markprec(3), respectively.  This attribute is only valid if the value of  agentDiffServPolicyAttrStmtEntryType is policeSimple(6),  policeSinglerate(7), or policeTworate(8).
.1.3.6.1.4.1.4526.1.9.3.4.3.4.1.17,FSM7326-QOS-DIFFSERV-PRIVATE-MIB::agentDiffServPolicyAttrStmtPoliceSimpleCrate,Unsigned32,read-create,,current,,Simple policing committed rate attribute statement value, specified in  kbps. This attribute is only valid if the value of  agentDiffServPolicyAttrStmtEntryType is set to policeSimple(6).
.1.3.6.1.4.1.4526.1.9.3.4.3.4.1.18,FSM7326-QOS-DIFFSERV-PRIVATE-MIB::agentDiffServPolicyAttrStmtPoliceSimpleCburst,Unsigned32,read-create,,current,,Simple policing committed burst size attribute statement value, specified  in Kbytes. This attribute is only valid if the value of  agentDiffServPolicyAttrStmtEntryType is set to policeSimple(6).
.1.3.6.1.4.1.4526.1.9.3.4.3.4.1.19,FSM7326-QOS-DIFFSERV-PRIVATE-MIB::agentDiffServPolicyAttrStmtPoliceSinglerateCrate,Unsigned32,read-create,,current,,Single-rate policing committed rate attribute statement value, specified  in kbps. This attribute is only valid if the value of  agentDiffServPolicyAttrStmtEntryType is set to policeSinglerate(7).
.1.3.6.1.4.1.4526.1.9.3.4.3.4.1.20,FSM7326-QOS-DIFFSERV-PRIVATE-MIB::agentDiffServPolicyAttrStmtPoliceSinglerateCburst,Unsigned32,read-create,,current,,Single-rate policing committed burst size attribute statement value,  specified in Kbytes. This attribute is only valid if the value of  agentDiffServPolicyAttrStmtEntryType is set to policeSinglerate(7).
.1.3.6.1.4.1.4526.1.9.3.4.3.4.1.21,FSM7326-QOS-DIFFSERV-PRIVATE-MIB::agentDiffServPolicyAttrStmtPoliceSinglerateEburst,Unsigned32,read-create,,current,,Single-rate policing excess burst size attribute statement value,  specified in Kbytes. This attribute is only valid if the value of  agentDiffServPolicyAttrStmtEntryType is set to policeSinglerate(7).
.1.3.6.1.4.1.4526.1.9.3.4.3.4.1.22,FSM7326-QOS-DIFFSERV-PRIVATE-MIB::agentDiffServPolicyAttrStmtPoliceTworateCrate,Unsigned32,read-create,,current,,Two-rate policing committed rate attribute statement value, specified in  kbps. This attribute is only valid if the value of  agentDiffServPolicyAttrStmtEntryType is set to policeTworate(8).
.1.3.6.1.4.1.4526.1.9.3.4.3.4.1.23,FSM7326-QOS-DIFFSERV-PRIVATE-MIB::agentDiffServPolicyAttrStmtPoliceTworateCburst,Unsigned32,read-create,,current,,Two-rate policing committed burst size attribute statement value,  specified in Kbytes. This attribute is only valid if the value of  agentDiffServPolicyAttrStmtEntryType is set to policeTworate(8).
.1.3.6.1.4.1.4526.1.9.3.4.3.4.1.24,FSM7326-QOS-DIFFSERV-PRIVATE-MIB::agentDiffServPolicyAttrStmtPoliceTworatePrate,Unsigned32,read-create,,current,,Two-rate policing peak rate attribute statement value, specified in kbps. agentDiffServPolicyAttrStmtEntryType is set to policeTworate(8).
.1.3.6.1.4.1.4526.1.9.3.4.3.4.1.25,FSM7326-QOS-DIFFSERV-PRIVATE-MIB::agentDiffServPolicyAttrStmtPoliceTworatePburst,Unsigned32,read-create,,current,,Two-rate policing peak burst size attribute statement value, specified in  Kbytes. This attribute is only valid if the value of  agentDiffServPolicyAttrStmtEntryType is set to policeTworate(8).
.1.3.6.1.4.1.4526.1.9.3.4.3.4.1.26,FSM7326-QOS-DIFFSERV-PRIVATE-MIB::agentDiffServPolicyAttrStmtRandomdropMinThresh,Unsigned32,read-create,,current,,Random drop minimum threshold attribute statement value -- the average  queue depth minimum threshold in bytes used by the WRED algorithm. This  attribute is only valid if the value of  agentDiffServPolicyAttrStmtEntryType is set to randomdrop(9).
.1.3.6.1.4.1.4526.1.9.3.4.3.4.1.27,FSM7326-QOS-DIFFSERV-PRIVATE-MIB::agentDiffServPolicyAttrStmtRandomdropMaxThresh,Unsigned32,read-create,,current,,Random drop maximum threshold attribute statement value -- the average  queue depth maximum threshold in bytes used by the WRED algorithm. This  attribute is only valid if the value of  agentDiffServPolicyAttrStmtEntryType is set to randomdrop(9).
.1.3.6.1.4.1.4526.1.9.3.4.3.4.1.28,FSM7326-QOS-DIFFSERV-PRIVATE-MIB::agentDiffServPolicyAttrStmtRandomdropMaxDropProb,Unsigned32,read-create,,current,,Random drop maximum drop probability attribute statement value -- the  packet drop probability when the queue depth average reaches its maximum  threshold. It is expressed as a percentage, and is an integer from 0 to  100. This attribute is only valid if the value of  agentDiffServPolicyAttrStmtEntryType is set to randomdrop(9).
.1.3.6.1.4.1.4526.1.9.3.4.3.4.1.29,FSM7326-QOS-DIFFSERV-PRIVATE-MIB::agentDiffServPolicyAttrStmtRandomdropSamplingRate,Unsigned32,read-create,,current,,Random drop sampling rate attribute statement value -- the period at which  the queue depth is sampled for computing an average, expressed in  microseconds. This value is an integer from 0 to 1000000, with a default  value of 0 (meaning per packet sampling). This attribute is only valid if  the value of agentDiffServPolicyAttrStmtEntryType is set to randomdrop(9).
.1.3.6.1.4.1.4526.1.9.3.4.3.4.1.30,FSM7326-QOS-DIFFSERV-PRIVATE-MIB::agentDiffServPolicyAttrStmtRandomdropDecayExponent,Unsigned32,read-create,,current,,Random drop decay exponent attribute statement value -- determines how
.1.3.6.1.4.1.4526.1.9.3.4.3.4.1.31,FSM7326-QOS-DIFFSERV-PRIVATE-MIB::agentDiffServPolicyAttrStmtShapeAverageCrate,Unsigned32,read-create,,current,,Average-rate shaping committed rate attribute statement value, specified  in kbps -- used to establish average rate traffic shaping for the  specified class , which limits transmissions for the class to the  committed information rate, with any excess traffic delayed via queueing.  This attribute is only valid if the value of  agentDiffServPolicyAttrStmtEntryType is set to shapeAverage(10).
.1.3.6.1.4.1.4526.1.9.3.4.3.4.1.32,FSM7326-QOS-DIFFSERV-PRIVATE-MIB::agentDiffServPolicyAttrStmtShapePeakCrate,Unsigned32,read-create,,current,,Peak-rate shaping committed rate attribute statement value, specified in  kbps -- used to establish peak rate traffic shaping for the specified  class , which allows transmissions for the class to exceed the committed  information rate by sending excess traffic with the understanding that it  could be dropped by a downstream network element. This attribute is only  valid if the value of agentDiffServPolicyAttrStmtEntryType is set to  shapePeak(11).
.1.3.6.1.4.1.4526.1.9.3.4.3.4.1.33,FSM7326-QOS-DIFFSERV-PRIVATE-MIB::agentDiffServPolicyAttrStmtShapePeakPrate,Unsigned32,read-create,,current,,Peak-rate shaping peak rate attribute statement value, specified in kbps which allows transmissions for the class to exceed the committed  information rate by sending excess traffic with the understanding that it  could be dropped by a downstream network element. This attribute is only  valid if the value of agentDiffServPolicyAttrStmtEntryType is set to  shapePeak(11).
.1.3.6.1.4.1.4526.1.9.3.4.3.4.1.34,FSM7326-QOS-DIFFSERV-PRIVATE-MIB::agentDiffServPolicyAttrStorageType,INTEGER,read-create,,current,other(1):volatile(2):nonVolatile(3):permanent(4):readOnly(5),Storage-type for this conceptual row.
.1.3.6.1.4.1.4526.1.9.3.4.3.4.1.35,FSM7326-QOS-DIFFSERV-PRIVATE-MIB::agentDiffServPolicyAttrRowStatus,INTEGER,read-create,,current,active(1):notInService(2):notReady(3):createAndGo(4):createAndWait(5):destroy(6),The status of this conceptual row.
.1.3.6.1.4.1.4526.1.9.3.4.3.5,FSM7326-QOS-DIFFSERV-PRIVATE-MIB::agentDiffServPolicyPerfInTable,,not-accessible,,current,,A table of inbound policy-class performance entries
.1.3.6.1.4.1.4526.1.9.3.4.3.5.1,FSM7326-QOS-DIFFSERV-PRIVATE-MIB::agentDiffServPolicyPerfInEntry,,not-accessible,agentDiffServPolicyIndex:agentDiffServPolicyInstIndex:ifIndex,current,,Represents entry for the performance attributes of the associated inbound 
.1.3.6.1.4.1.4526.1.9.3.4.3.5.1.1,FSM7326-QOS-DIFFSERV-PRIVATE-MIB::agentDiffServPolicyPerfInOfferedOctets,Counter32,read-only,,current,,Offered octets count for the inbound policy-class instance performance  entry.
.1.3.6.1.4.1.4526.1.9.3.4.3.5.1.2,FSM7326-QOS-DIFFSERV-PRIVATE-MIB::agentDiffServPolicyPerfInOfferedPackets,Counter32,read-only,,current,,Offered packets count for the inbound policy-class instance performance  entry.
.1.3.6.1.4.1.4526.1.9.3.4.3.5.1.3,FSM7326-QOS-DIFFSERV-PRIVATE-MIB::agentDiffServPolicyPerfInDiscardedOctets,Counter32,read-only,,current,,Discarded octets count for the inbound policy-class instance performance  entry.
.1.3.6.1.4.1.4526.1.9.3.4.3.5.1.4,FSM7326-QOS-DIFFSERV-PRIVATE-MIB::agentDiffServPolicyPerfInDiscardedPackets,Counter32,read-only,,current,,Discarded packets count for the inbound policy-class instance performance  entry.
.1.3.6.1.4.1.4526.1.9.3.4.3.5.1.5,FSM7326-QOS-DIFFSERV-PRIVATE-MIB::agentDiffServPolicyPerfInHCOfferedOctets,Counter64,read-only,,current,,Offered octets high capacity count for the inbound policy-class instance  performance entry.
.1.3.6.1.4.1.4526.1.9.3.4.3.5.1.6,FSM7326-QOS-DIFFSERV-PRIVATE-MIB::agentDiffServPolicyPerfInHCOfferedPackets,Counter64,read-only,,current,,Offered packets high capacity count for the inbound policy-class instance  performance entry.
.1.3.6.1.4.1.4526.1.9.3.4.3.5.1.7,FSM7326-QOS-DIFFSERV-PRIVATE-MIB::agentDiffServPolicyPerfInHCDiscardedOctets,Counter64,read-only,,current,,Discarded octets high capacity count for the inbound policy-class instance  performance entry.
.1.3.6.1.4.1.4526.1.9.3.4.3.5.1.8,FSM7326-QOS-DIFFSERV-PRIVATE-MIB::agentDiffServPolicyPerfInHCDiscardedPackets,Counter64,read-only,,current,,Discarded packets high capacity count for the inbound policy-class  instance performance entry.
.1.3.6.1.4.1.4526.1.9.3.4.3.5.1.9,FSM7326-QOS-DIFFSERV-PRIVATE-MIB::agentDiffServPolicyPerfInStorageType,INTEGER,read-only,,current,other(1):volatile(2):nonVolatile(3):permanent(4):readOnly(5),Storage-type for this conceptual row.
.1.3.6.1.4.1.4526.1.9.3.4.3.5.1.10,FSM7326-QOS-DIFFSERV-PRIVATE-MIB::agentDiffServPolicyPerfInRowStatus,INTEGER,read-only,,current,active(1):notInService(2):notReady(3):createAndGo(4):createAndWait(5):destroy(6),The status of this conceptual row.
.1.3.6.1.4.1.4526.1.9.3.4.3.6,FSM7326-QOS-DIFFSERV-PRIVATE-MIB::agentDiffServPolicyPerfOutTable,,not-accessible,,current,,A table of outbound policy-class performance entries
.1.3.6.1.4.1.4526.1.9.3.4.3.6.1,FSM7326-QOS-DIFFSERV-PRIVATE-MIB::agentDiffServPolicyPerfOutEntry,,not-accessible,agentDiffServPolicyIndex:agentDiffServPolicyInstIndex:ifIndex,current,,Represents entry for the performance attributes of the associated outbound 
.1.3.6.1.4.1.4526.1.9.3.4.3.6.1.1,FSM7326-QOS-DIFFSERV-PRIVATE-MIB::agentDiffServPolicyPerfOutTailDroppedOctets,Counter32,read-only,,current,,Tail-dropped octets count for the outbound policy-class instance  performance entry.
.1.3.6.1.4.1.4526.1.9.3.4.3.6.1.2,FSM7326-QOS-DIFFSERV-PRIVATE-MIB::agentDiffServPolicyPerfOutTailDroppedPackets,Counter32,read-only,,current,,Tail-dropped packets count for the outbound policy-class instance  performance entry.
.1.3.6.1.4.1.4526.1.9.3.4.3.6.1.3,FSM7326-QOS-DIFFSERV-PRIVATE-MIB::agentDiffServPolicyPerfOutRandomDroppedOctets,Counter32,read-only,,current,,Random-dropped octets count for the outbound policy-class instance  performance entry.
.1.3.6.1.4.1.4526.1.9.3.4.3.6.1.4,FSM7326-QOS-DIFFSERV-PRIVATE-MIB::agentDiffServPolicyPerfOutRandomDroppedPackets,Counter32,read-only,,current,,Random-dropped packets count for the outbound policy-class instance  performance entry.
.1.3.6.1.4.1.4526.1.9.3.4.3.6.1.5,FSM7326-QOS-DIFFSERV-PRIVATE-MIB::agentDiffServPolicyPerfOutShapeDelayedOctets,Counter32,read-only,,current,,Shape-delayed octets count for the outbound policy-class instance  performance entry.
.1.3.6.1.4.1.4526.1.9.3.4.3.6.1.6,FSM7326-QOS-DIFFSERV-PRIVATE-MIB::agentDiffServPolicyPerfOutShapeDelayedPackets,Counter32,read-only,,current,,Shape-delayed packets count for the outbound policy-class instance  performance entry.
.1.3.6.1.4.1.4526.1.9.3.4.3.6.1.7,FSM7326-QOS-DIFFSERV-PRIVATE-MIB::agentDiffServPolicyPerfOutSentOctets,Counter32,read-only,,current,,Sent octets count for the outbound policy-class instance performance  entry.
.1.3.6.1.4.1.4526.1.9.3.4.3.6.1.8,FSM7326-QOS-DIFFSERV-PRIVATE-MIB::agentDiffServPolicyPerfOutSentPackets,Counter32,read-only,,current,,Sent packets count for the outbound policy-class instance performance  entry.
.1.3.6.1.4.1.4526.1.9.3.4.3.6.1.9,FSM7326-QOS-DIFFSERV-PRIVATE-MIB::agentDiffServPolicyPerfOutHCTailDroppedOctets,Counter64,read-only,,current,,Tail-dropped octets high capacity count for the outbound policy-class  instance performance entry.
.1.3.6.1.4.1.4526.1.9.3.4.3.6.1.10,FSM7326-QOS-DIFFSERV-PRIVATE-MIB::agentDiffServPolicyPerfOutHCTailDroppedPackets,Counter64,read-only,,current,,Tail-dropped packets high capacity count for the outbound policy-class  instance performance entry.
.1.3.6.1.4.1.4526.1.9.3.4.3.6.1.11,FSM7326-QOS-DIFFSERV-PRIVATE-MIB::agentDiffServPolicyPerfOutHCRandomDroppedOctets,Counter64,read-only,,current,,Random-dropped octets high capacity count for the outbound policy-class  instance performance entry.
.1.3.6.1.4.1.4526.1.9.3.4.3.6.1.12,FSM7326-QOS-DIFFSERV-PRIVATE-MIB::agentDiffServPolicyPerfOutHCRandomDroppedPackets,Counter64,read-only,,current,,Random-dropped packets high capacity count for the outbound policy-class  instance performance entry.
.1.3.6.1.4.1.4526.1.9.3.4.3.6.1.13,FSM7326-QOS-DIFFSERV-PRIVATE-MIB::agentDiffServPolicyPerfOutHCShapeDelayedOctets,Counter64,read-only,,current,,Shape-delayed octets high capacity count for the outbound policy-class  instance performance entry.
.1.3.6.1.4.1.4526.1.9.3.4.3.6.1.14,FSM7326-QOS-DIFFSERV-PRIVATE-MIB::agentDiffServPolicyPerfOutHCShapeDelayedPackets,Counter64,read-only,,current,,Shape-delayed packets high capacity count for the outbound policy-class  instance performance entry.
.1.3.6.1.4.1.4526.1.9.3.4.3.6.1.15,FSM7326-QOS-DIFFSERV-PRIVATE-MIB::agentDiffServPolicyPerfOutHCSentOctets,Counter64,read-only,,current,,Sent octets high capacity count for the outbound policy-class instance  performance entry.
.1.3.6.1.4.1.4526.1.9.3.4.3.6.1.16,FSM7326-QOS-DIFFSERV-PRIVATE-MIB::agentDiffServPolicyPerfOutHCSentPackets,Counter64,read-only,,current,,Sent packets high capacity count for the outbound policy-class instance  performance entry.
.1.3.6.1.4.1.4526.1.9.3.4.3.6.1.17,FSM7326-QOS-DIFFSERV-PRIVATE-MIB::agentDiffServPolicyPerfOutStorageType,INTEGER,read-only,,current,other(1):volatile(2):nonVolatile(3):permanent(4):readOnly(5),Storage-type for this conceptual row.
.1.3.6.1.4.1.4526.1.9.3.4.3.6.1.18,FSM7326-QOS-DIFFSERV-PRIVATE-MIB::agentDiffServPolicyPerfOutRowStatus,INTEGER,read-only,,current,active(1):notInService(2):notReady(3):createAndGo(4):createAndWait(5):destroy(6),The status of this conceptual row.
.1.3.6.1.4.1.4526.1.9.3.4.4,FSM7326-QOS-DIFFSERV-PRIVATE-MIB::agentDiffServServiceGroup,,,,,,
.1.3.6.1.4.1.4526.1.9.3.4.4.1,FSM7326-QOS-DIFFSERV-PRIVATE-MIB::agentDiffServServiceTable,,not-accessible,,current,,A table of the service entries.
.1.3.6.1.4.1.4526.1.9.3.4.4.1.1,FSM7326-QOS-DIFFSERV-PRIVATE-MIB::agentDiffServServiceEntry,,not-accessible,agentDiffServServiceIfIndex:agentDiffServServiceIfDirection,current,,Represents entry for policy assigned to an interface in a particular  direction.
.1.3.6.1.4.1.4526.1.9.3.4.4.1.1.1,FSM7326-QOS-DIFFSERV-PRIVATE-MIB::agentDiffServServiceIfIndex,Integer32,not-accessible,,current,,External interface number of the interface to which policy is assigned.
.1.3.6.1.4.1.4526.1.9.3.4.4.1.1.2,FSM7326-QOS-DIFFSERV-PRIVATE-MIB::agentDiffServServiceIfDirection,INTEGER,not-accessible,,current,in(1):out(2),Interface direction to which the policy is assigned.
.1.3.6.1.4.1.4526.1.9.3.4.4.1.1.3,FSM7326-QOS-DIFFSERV-PRIVATE-MIB::agentDiffServServicePolicyIndex,Unsigned32,read-create,,current,,Index of the Policy Table row whose policy definition is attached to the  interface in the specified direction.
.1.3.6.1.4.1.4526.1.9.3.4.4.1.1.4,FSM7326-QOS-DIFFSERV-PRIVATE-MIB::agentDiffServServiceIfOperStatus,INTEGER,read-only,,current,up(1):down(2),The current operational state of the DiffServ service 
.1.3.6.1.4.1.4526.1.9.3.4.4.1.1.5,FSM7326-QOS-DIFFSERV-PRIVATE-MIB::agentDiffServServiceStorageType,INTEGER,read-create,,current,other(1):volatile(2):nonVolatile(3):permanent(4):readOnly(5),Storage-type for this conceptual row
.1.3.6.1.4.1.4526.1.9.3.4.4.1.1.6,FSM7326-QOS-DIFFSERV-PRIVATE-MIB::agentDiffServServiceRowStatus,INTEGER,read-create,,current,active(1):notInService(2):notReady(3):createAndGo(4):createAndWait(5):destroy(6),The status of this conceptual row.
.1.3.6.1.4.1.4526.1.9.3.4.4.2,FSM7326-QOS-DIFFSERV-PRIVATE-MIB::agentDiffServServicePerfTable,,not-accessible,,current,,A table of service performance entries.
.1.3.6.1.4.1.4526.1.9.3.4.4.2.1,FSM7326-QOS-DIFFSERV-PRIVATE-MIB::agentDiffServServicePerfEntry,,not-accessible,,current,,Represents a service performance entry.
.1.3.6.1.4.1.4526.1.9.3.4.4.2.1.1,FSM7326-QOS-DIFFSERV-PRIVATE-MIB::agentDiffServServicePerfOfferedOctets,Counter32,read-only,,current,,Offered octets count for the specified service interface and direction
.1.3.6.1.4.1.4526.1.9.3.4.4.2.1.2,FSM7326-QOS-DIFFSERV-PRIVATE-MIB::agentDiffServServicePerfOfferedPackets,Counter32,read-only,,current,,Offered packets count for specified service interface and direction
.1.3.6.1.4.1.4526.1.9.3.4.4.2.1.3,FSM7326-QOS-DIFFSERV-PRIVATE-MIB::agentDiffServServicePerfDiscardedOctets,Counter32,read-only,,current,,Discarded octets count for the specified service interface and direction
.1.3.6.1.4.1.4526.1.9.3.4.4.2.1.4,FSM7326-QOS-DIFFSERV-PRIVATE-MIB::agentDiffServServicePerfDiscardedPackets,Counter32,read-only,,current,,Discarded packets count for the specified service interface and direction
.1.3.6.1.4.1.4526.1.9.3.4.4.2.1.5,FSM7326-QOS-DIFFSERV-PRIVATE-MIB::agentDiffServServicePerfSentOctets,Counter32,read-only,,current,,Sent octets count for the specified service interface and direction
.1.3.6.1.4.1.4526.1.9.3.4.4.2.1.6,FSM7326-QOS-DIFFSERV-PRIVATE-MIB::agentDiffServServicePerfSentPackets,Counter32,read-only,,current,,Sent packets count for the specified service interface and direction
.1.3.6.1.4.1.4526.1.9.3.4.4.2.1.7,FSM7326-QOS-DIFFSERV-PRIVATE-MIB::agentDiffServServicePerfHCOfferedOctets,Counter64,read-only,,current,,Offered octets high capacity count for the specified service interface  and direction
.1.3.6.1.4.1.4526.1.9.3.4.4.2.1.8,FSM7326-QOS-DIFFSERV-PRIVATE-MIB::agentDiffServServicePerfHCOfferedPackets,Counter64,read-only,,current,,Offered packets high capacity count for the specified service interface  and direction
.1.3.6.1.4.1.4526.1.9.3.4.4.2.1.9,FSM7326-QOS-DIFFSERV-PRIVATE-MIB::agentDiffServServicePerfHCDiscardedOctets,Counter64,read-only,,current,,Discarded octets high capacity count for the specified service interface  and direction
.1.3.6.1.4.1.4526.1.9.3.4.4.2.1.10,FSM7326-QOS-DIFFSERV-PRIVATE-MIB::agentDiffServServicePerfHCDiscardedPackets,Counter64,read-only,,current,,Discarded packets high capacity count for the specified service interface  and direction
.1.3.6.1.4.1.4526.1.9.3.4.4.2.1.11,FSM7326-QOS-DIFFSERV-PRIVATE-MIB::agentDiffServServicePerfHCSentOctets,Counter64,read-only,,current,,Sent octets high capacity count for the specified service interface and  direction
.1.3.6.1.4.1.4526.1.9.3.4.4.2.1.12,FSM7326-QOS-DIFFSERV-PRIVATE-MIB::agentDiffServServicePerfHCSentPackets,Counter64,read-only,,current,,Sent packets high capacity count for the specified service interface and  direction
.1.3.6.1.4.1.4526.1.9.8,FSM7326-RADIUS-MIB::fsm7326Radius,,,,,,The FSM7326 Radius MIB
.1.3.6.1.4.1.4526.1.9.8.1,FSM7326-RADIUS-MIB::agentRadiusConfigGroup,,,,,,
.1.3.6.1.4.1.4526.1.9.8.1.1,FSM7326-RADIUS-MIB::agentRadiusMaxTransmit,Unsigned32,read-write,,current,,Maximum number of retransmissions of a RADIUS request packet
.1.3.6.1.4.1.4526.1.9.8.1.2,FSM7326-RADIUS-MIB::agentRadiusTimeout,Unsigned32,read-write,,current,,Time out duration (in seconds) before packets are retransmitted
.1.3.6.1.4.1.4526.1.9.8.1.3,FSM7326-RADIUS-MIB::agentRadiusAccountingMode,INTEGER,read-write,,current,enable(1):disable(2),Identifies if RADIUS Accounting has been enabled or not
.1.3.6.1.4.1.4526.1.9.8.1.4,FSM7326-RADIUS-MIB::agentRadiusStatsClear,INTEGER,read-write,,current,enable(1):disable(2),When set to enable(1), all Radius statistics will be reset.
.1.3.6.1.4.1.4526.1.9.8.1.5,FSM7326-RADIUS-MIB::agentRadiusAccountingIndexNextValid,Integer32,read-only,,current,,Indicates the next valid index into the agentRadiusAccountingConfigTable  for creation. If no additional entries are allowed, this will be 0.
.1.3.6.1.4.1.4526.1.9.8.1.6,FSM7326-RADIUS-MIB::agentRadiusAccountingConfigTable,,not-accessible,,current,,Table with information about Radius Accounting Server IP Addresses, port numbers and shared secret. Only one entry is supported at this time.
.1.3.6.1.4.1.4526.1.9.8.1.6.1,FSM7326-RADIUS-MIB::agentRadiusAccountingConfigEntry,,not-accessible,agentRadiusAccountingServerIndex,current,,Entry consisting of configuration data for a Radius Accounting Server.
.1.3.6.1.4.1.4526.1.9.8.1.6.1.1,FSM7326-RADIUS-MIB::agentRadiusAccountingServerIndex,Integer32,not-accessible,,current,,Unique index of the configured RADIUS accounting server
.1.3.6.1.4.1.4526.1.9.8.1.6.1.2,FSM7326-RADIUS-MIB::agentRadiusAccountingServerAddress,IpAddress,read-create,,current,,IP Address of the configured RADIUS accounting server. This object cannot be changed after creation.
.1.3.6.1.4.1.4526.1.9.8.1.6.1.3,FSM7326-RADIUS-MIB::agentRadiusAccountingPort,Unsigned32,read-write,,current,,Port number for the RADIUS accounting server. This object cannot be configured on row creation.
.1.3.6.1.4.1.4526.1.9.8.1.6.1.4,FSM7326-RADIUS-MIB::agentRadiusAccountingSecret,OCTET,read-write,,current,,Configured shared sercret for the RADIUS accounting server. This object cannot be configured on row creation.
.1.3.6.1.4.1.4526.1.9.8.1.6.1.5,FSM7326-RADIUS-MIB::agentRadiusAccountingStatus,INTEGER,read-create,,current,active(1):notInService(2):notReady(3):createAndGo(4):createAndWait(5):destroy(6),
.1.3.6.1.4.1.4526.1.9.8.1.7,FSM7326-RADIUS-MIB::agentRadiusServerIndexNextValid,Integer32,read-only,,current,,Indicates the next valid index into the agentRadiusServerConfigTable  for creation. If no additional entries are allowed, this will be 0.
.1.3.6.1.4.1.4526.1.9.8.1.8,FSM7326-RADIUS-MIB::agentRadiusServerConfigTable,,not-accessible,,current,,Table with information about Radius Accounting Server IP Addresses, port numbers and shared secret
.1.3.6.1.4.1.4526.1.9.8.1.8.1,FSM7326-RADIUS-MIB::agentRadiusServerConfigEntry,,not-accessible,agentRadiusServerIndex,current,,Entry consisting of configuration data for a Radius Server. Creation requires setting 
.1.3.6.1.4.1.4526.1.9.8.1.8.1.1,FSM7326-RADIUS-MIB::agentRadiusServerIndex,Integer32,not-accessible,,current,,Unique index of the configured RADIUS server
.1.3.6.1.4.1.4526.1.9.8.1.8.1.2,FSM7326-RADIUS-MIB::agentRadiusServerAddress,IpAddress,read-create,,current,,IP Address of the configured RADIUS server. This object cannot be changed after creation.
.1.3.6.1.4.1.4526.1.9.8.1.8.1.3,FSM7326-RADIUS-MIB::agentRadiusServerPort,Unsigned32,read-write,,current,,Port number for the RADIUS server. This object cannot be configured on row creation.
.1.3.6.1.4.1.4526.1.9.8.1.8.1.4,FSM7326-RADIUS-MIB::agentRadiusServerSecret,OCTET,read-write,,current,,Configured shared sercret for the RADIUS server. This object cannot be configured on row creation.
.1.3.6.1.4.1.4526.1.9.8.1.8.1.5,FSM7326-RADIUS-MIB::agentRadiusServerPrimaryMode,INTEGER,read-write,,current,enable(1):disable(2),Configure the RADIUS server to be the primary server. If there is any  other server that is configured to be primary, that server is set to be  a seconday server and this entry is set Primary. This object cannot be configured on row creation.
.1.3.6.1.4.1.4526.1.9.8.1.8.1.6,FSM7326-RADIUS-MIB::agentRadiusServerCurrentMode,INTEGER,read-only,,current,yes(1):no(2),Indicate if the RADIUS server is the current server in user for authentication.
.1.3.6.1.4.1.4526.1.9.8.1.8.1.7,FSM7326-RADIUS-MIB::agentRadiusServerMsgAuth,INTEGER,read-write,,current,enable(1):disable(2),Enable or disable the message authenticator attribute for this  RADIUS server. This object cannot be configured on row creation.
.1.3.6.1.4.1.4526.1.9.8.1.8.1.8,FSM7326-RADIUS-MIB::agentRadiusServerStatus,INTEGER,read-create,,current,active(1):notInService(2):notReady(3):createAndGo(4):createAndWait(5):destroy(6),
.1.3.6.1.4.1.4526.1.9.11,FSM7326-MGMT-SECURITY-MIB::fsm7326MgmtSecurity,,,,,,
.1.3.6.1.4.1.4526.1.9.11.1,FSM7326-MGMT-SECURITY-MIB::agentSSLConfigGroup,,,,,,
.1.3.6.1.4.1.4526.1.9.11.1.1,FSM7326-MGMT-SECURITY-MIB::agentSSLAdminMode,INTEGER,read-write,,current,enable(1):disable(2),Configures whether the SSL service is enabled on this switch. The default value is disable(2).
.1.3.6.1.4.1.4526.1.9.11.1.2,FSM7326-MGMT-SECURITY-MIB::agentSSLSecurePort,Integer32,read-write,,current,,Configures the port the SSL service will respond on. The default  value is 443.
.1.3.6.1.4.1.4526.1.9.11.1.3,FSM7326-MGMT-SECURITY-MIB::agentSSLProtocolLevel,INTEGER,read-write,,current,ssl30(1):tls10(2):both(3),Configures which protocol versions of SSL are enabled on this switch. The default value is both(3).
.1.3.6.1.4.1.4526.1.9.11.2,FSM7326-MGMT-SECURITY-MIB::agentSSHConfigGroup,,,,,,
.1.3.6.1.4.1.4526.1.9.11.2.1,FSM7326-MGMT-SECURITY-MIB::agentSSHAdminMode,INTEGER,read-write,,current,enable(1):disable(2),Configures whether the SSH service is enabled on this switch. The default value is disable(2).
.1.3.6.1.4.1.4526.1.9.11.2.2,FSM7326-MGMT-SECURITY-MIB::agentSSHProtocolLevel,INTEGER,read-write,,current,ssh10(1):ssh20(2):both(3),Configures which protocol versions of SSH are enabled on this switch. The default value is both(3).
.1.3.6.1.4.1.4526.1.9.11.2.3,FSM7326-MGMT-SECURITY-MIB::agentSSHSessionsCount,Integer32,read-only,,current,,Current number of active SSH sessions on this switch.
.1.3.6.1.4.1.4526.1.9.15,FSM7326-POWER-ETHERNET-MIB::fsm7326powerEthernetMIB,,,,,,This MIB Augments the POWER-ETHERNET-MIB created by the IETF Ethernet  Interfaces and Hub MIB Working Group for managing Power Source  Equipment (PSE). The objects in this MIB are intended to provide  additional objects for reporting information available to the hardware  on this platform which are not represented in the draft MIB.
.1.3.6.1.4.1.4526.1.9.15.1,FSM7326-POWER-ETHERNET-MIB::agentPethObjects,,,,,,
.1.3.6.1.4.1.4526.1.9.15.1.1,FSM7326-POWER-ETHERNET-MIB::agentPethPsePortTable,,not-accessible,,current,,A table of per-port information and configuration objects relating  to the power status of each port.
.1.3.6.1.4.1.4526.1.9.15.1.1.1,FSM7326-POWER-ETHERNET-MIB::agentPethPsePortEntry,,not-accessible,,current,,A collection of objects providing additional power information  and control parameters for the specified port.
.1.3.6.1.4.1.4526.1.9.15.1.1.1.1,FSM7326-POWER-ETHERNET-MIB::agentPethPowerLimit,Gauge32,read-write,,current,,The configured maximum power this port can provide to an  attached device measured in Watts.
.1.3.6.1.4.1.4526.1.9.15.1.1.1.2,FSM7326-POWER-ETHERNET-MIB::agentPethOutputPower,Gauge32,read-only,,current,,The power this port is supplying to an attached device measured  in Milliwatts.
.1.3.6.1.4.1.4526.1.9.15.1.1.1.3,FSM7326-POWER-ETHERNET-MIB::agentPethOutputCurrent,Gauge32,read-only,,current,,The current this port is supplying to an attached device measured  in Milliamps.
.1.3.6.1.4.1.4526.1.9.15.1.1.1.4,FSM7326-POWER-ETHERNET-MIB::agentPethOutputVolts,Gauge32,read-only,,current,,The voltage this port is supplying to an attached device measured  in Volts.
.1.3.6.1.4.1.4526.1.10,BROADCOM-REF-MIB::fsm726v2,,,,,,
.1.3.6.1.4.1.4526.2,BROADCOM-REF-MIB::vpnrouter,,,,,,
.1.3.6.1.4.1.4526.3,BROADCOM-REF-MIB::carrier,,,,,,
.1.3.6.1.4.1.4526.4,BROADCOM-REF-MIB::wireless,,,,,,
.1.3.6.1.4.1.4526.4.1,BROADCOM-REF-MIB::me103,,,,,,
.1.3.6.1.4.1.4526.4.1.1,NETGEAR-ME-MIB::wirelessAPSystemGroup,,,,,,
.1.3.6.1.4.1.4526.4.1.1.1,NETGEAR-ME-MIB::wirelessAPMacAddr,OCTET,read-only,,mandatory,,Access Point MAC address, It will be like '00c002003009'
.1.3.6.1.4.1.4526.4.1.1.2,NETGEAR-ME-MIB::wirelessAPFWVer,OCTET,read-only,,mandatory,,Access Point firmware version, It will be like 'Version 2.0 Release 08'
.1.3.6.1.4.1.4526.4.1.1.3,NETGEAR-ME-MIB::wirelessAPDateTime,OCTET,read-only,,mandatory,,The date and time, with optional timezone information. It will be like '2003-04-03 02:50:54 GMT'
.1.3.6.1.4.1.4526.4.1.1.4,NETGEAR-ME-MIB::wirelessAPUpTime,TimeTicks,read-only,,mandatory,,The time (in hundredths of a second) since the network management portion of the system was last re-initialized.  It will like '11223533' in the unit of 1/100second.
.1.3.6.1.4.1.4526.4.1.1.5,NETGEAR-ME-MIB::wirelessAPResetNow,INTEGER,read-write,,mandatory,not-reset(0):reset(1),Setting this object to true(1) causes the device to reset. Reading this object always returns false(2).
.1.3.6.1.4.1.4526.4.1.1.6,NETGEAR-ME-MIB::wirelessAPResetToFactoryDefault,INTEGER,read-write,,mandatory,not-erase(0):erase(1),Setting this object to true(1) causes the device to reset to factory default value. Reading this object always returns false(2).
.1.3.6.1.4.1.4526.4.1.1.7,NETGEAR-ME-MIB::wirelessAPPassword,OCTET,read-write,,mandatory,,Get/Set the password
.1.3.6.1.4.1.4526.4.1.1.8,NETGEAR-ME-MIB::wirelessAPClearLog,INTEGER,read-write,,mandatory,not-clear(0):clear(1),Setting this value clear(1) causes the AP to clear the log data,  Reading this walue always return not-clear(0).
.1.3.6.1.4.1.4526.4.1.1.9,NETGEAR-ME-MIB::wirelessAPSaveConfiguration,INTEGER,read-write,,mandatory,not-save(0):save(1),Setting this value save(1) causes the settings changed by SNMP to be stored forever but in memory,  Reading this walue always return save(0).
.1.3.6.1.4.1.4526.4.1.1.10,NETGEAR-ME-MIB::snmpTrapVersion,INTEGER,read-write,,mandatory,V1(0):V2c(1), 
.1.3.6.1.4.1.4526.4.1.1.11,NETGEAR-ME-MIB::snmpTrapRcvIpType,INTEGER,read-write,,mandatory,Uni-cast(0):Broadcast(1), 
.1.3.6.1.4.1.4526.4.1.1.12,NETGEAR-ME-MIB::snmpAPTrapRcvIpAddress,IpAddress,read-write,,mandatory,, 
.1.3.6.1.4.1.4526.4.1.1.13,NETGEAR-ME-MIB::snmpAPSNMPEnable,INTEGER,read-write,,mandatory,Disable(0):Enable(1), 
.1.3.6.1.4.1.4526.4.1.1.14,NETGEAR-ME-MIB::snmpAPCommunity,OCTET,read-write,,mandatory,, 
.1.3.6.1.4.1.4526.4.1.1.15,NETGEAR-ME-MIB::snmpAPAccessRight,INTEGER,read-write,,mandatory,Read-Only(0):Read-and-Write(1), 
.1.3.6.1.4.1.4526.4.1.1.16,NETGEAR-ME-MIB::snmpAPManagersType,INTEGER,read-write,,mandatory,A-Specific-Station(0):Any-Station(1), 
.1.3.6.1.4.1.4526.4.1.1.17,NETGEAR-ME-MIB::snmpAPSpecificStationIp,IpAddress,read-write,,mandatory,, 
.1.3.6.1.4.1.4526.4.1.1.18,NETGEAR-ME-MIB::snmpAPTrapEnable,INTEGER,read-write,,mandatory,Disable(0):Enable(1), 
.1.3.6.1.4.1.4526.4.1.2,NETGEAR-ME-MIB::wirelessAPConnectedStationGroup,,,,,,
.1.3.6.1.4.1.4526.4.1.2.1,NETGEAR-ME-MIB::wirelessAPConnectedStationTableRefresh,INTEGER,read-write,,mandatory,not-refresh(0):refresh(1),Setting this value to refresh(1), the wireless AP will start the conntected Station Table refresh progress.
.1.3.6.1.4.1.4526.4.1.2.2,NETGEAR-ME-MIB::wirelessAPConnectedStation,,,,,,
.1.3.6.1.4.1.4526.4.1.2.2.1,NETGEAR-ME-MIB::wirelessAPConnectedStationTable,,not-accessible,,mandatory,,Wireless AP Connected Station Table Object
.1.3.6.1.4.1.4526.4.1.2.2.1.1,NETGEAR-ME-MIB::wirelessAPConnectedStationEntry,,not-accessible,wirelessAPConnectedStationMacAddr,mandatory,,An entry containing information for Wireless AP Connected Station Table
.1.3.6.1.4.1.4526.4.1.2.2.1.1.2,NETGEAR-ME-MIB::wirelessAPConnectedStationMacAddr,OCTET,read-only,,mandatory,,Wireless Connected Station Mac Address
.1.3.6.1.4.1.4526.4.1.2.2.1.1.3,NETGEAR-ME-MIB::wirelessAPConnectedStationStatus,INTEGER,read-only,,mandatory,associated(0):athenticating(1):authenticated(2):not-associated(3),Wireless Connected Station Status
.1.3.6.1.4.1.4526.4.1.2.3,NETGEAR-ME-MIB::wirelessAPControl,INTEGER,read-write,,mandatory,off(0):on(1),Wireless Access Point Control
.1.3.6.1.4.1.4526.4.1.2.4,NETGEAR-ME-MIB::wirelessAPControlList,,,,,,
.1.3.6.1.4.1.4526.4.1.2.4.1,NETGEAR-ME-MIB::wirelessAPControlListTable,,not-accessible,,mandatory,,Wireless Access Point Control List Table Object
.1.3.6.1.4.1.4526.4.1.2.4.1.1,NETGEAR-ME-MIB::wirelessAPControlListEntry,,not-accessible,wirelessAPControlListMacAddr,mandatory,,An entry containing information for Wireless Access Point Control List Table Object
.1.3.6.1.4.1.4526.4.1.2.4.1.1.2,NETGEAR-ME-MIB::wirelessAPControlListMacAddr,OCTET,read-write,,mandatory,,Wireless Access Point Control List Mac Address
.1.3.6.1.4.1.4526.4.1.2.5,NETGEAR-ME-MIB::wirelessAPCtlOperate,,,,,,
.1.3.6.1.4.1.4526.4.1.2.5.1,NETGEAR-ME-MIB::wirelessAPAddCtlMacAddr,OCTET,read-write,,mandatory,,The added entry's Physical Address,  Reading this object always return '000000000000'
.1.3.6.1.4.1.4526.4.1.2.5.2,NETGEAR-ME-MIB::wirelessAPDelCtlMacAddr,OCTET,read-write,,mandatory,,The deleted entry's Physical Address,  Reading this object always return '000000000000'
.1.3.6.1.4.1.4526.4.1.3,NETGEAR-ME-MIB::wirelessAPIfTrafficGroup,,,,,,
.1.3.6.1.4.1.4526.4.1.3.1,NETGEAR-ME-MIB::wirelessAPIfWiredTrafficGroup,,,,,,
.1.3.6.1.4.1.4526.4.1.3.1.1,NETGEAR-ME-MIB::wirelessAPIfWiredTotalOctetsIn,Counter32,read-only,,mandatory,,Traffic received by the wireless AP via Ethernet in octets
.1.3.6.1.4.1.4526.4.1.3.1.2,NETGEAR-ME-MIB::wirelessAPIfWiredTotalOctetsOut,Counter32,read-only,,mandatory,,Traffic transmitted by the wireless AP via Ethernet in octets
.1.3.6.1.4.1.4526.4.1.3.1.3,NETGEAR-ME-MIB::wirelessAPIfWiredPacketsIn,Counter32,read-only,,mandatory,,Traffic received by the wireless AP via Ethernet in packets
.1.3.6.1.4.1.4526.4.1.3.1.4,NETGEAR-ME-MIB::wirelessAPIfWiredPacketsOut,Counter32,read-only,,mandatory,,Traffic transmitted by the wireless AP via Ethernet in packets.
.1.3.6.1.4.1.4526.4.1.3.1.5,NETGEAR-ME-MIB::wirelessAPIfWiredThroughputIn,Counter32,read-only,,mandatory,,Throughput-in at Ethernet by the wireless AP in the unit of B/s
.1.3.6.1.4.1.4526.4.1.3.1.6,NETGEAR-ME-MIB::wirelessAPIfWiredThroughputOut,Counter32,read-only,,mandatory,,Throughput-out at Ethernet by the wireless AP in the unit of B/s
.1.3.6.1.4.1.4526.4.1.3.1.7,NETGEAR-ME-MIB::wirelessAPIfWiredErrorsIn,Counter32,read-only,,mandatory,,CRC errors in in-traffic occurs at Ethernet by the wireless AP
.1.3.6.1.4.1.4526.4.1.3.1.8,NETGEAR-ME-MIB::wirelessAPIfWiredErrorsOut,Counter32,read-only,,mandatory,,CRC errors in out-traffic occurs at Ethernet by the wireless AP
.1.3.6.1.4.1.4526.4.1.3.1.9,NETGEAR-ME-MIB::wirelessAPIfWiredTrafficResetCounter,INTEGER,read-write,,mandatory,false(0):true(1),Reset the Etherenet interface both Octets In and Out counters
.1.3.6.1.4.1.4526.4.1.3.2,NETGEAR-ME-MIB::wirelessAPIfWlanTrafficGroup,,,,,,
.1.3.6.1.4.1.4526.4.1.3.2.1,NETGEAR-ME-MIB::wirelessAPIfWLANTotalOctetsIn,Counter32,read-only,,mandatory,,Traffic received via WLAN by the wireless AP in octets
.1.3.6.1.4.1.4526.4.1.3.2.2,NETGEAR-ME-MIB::wirelessAPIfWLANTotalOctetsOut,Counter32,read-only,,mandatory,,Traffic transmitted via WLAN by the wireless AP in octets
.1.3.6.1.4.1.4526.4.1.3.2.3,NETGEAR-ME-MIB::wirelessAPIfWLANUnicastPacketsIn,Counter32,read-only,,mandatory,,Unicast traffic received via WLAN by the wireless AP in packets
.1.3.6.1.4.1.4526.4.1.3.2.4,NETGEAR-ME-MIB::wirelessAPIfWLANUnicastPacketsOut,Counter32,read-only,,mandatory,,Unicast traffic transmitted via WLAN by the wireless AP in packets
.1.3.6.1.4.1.4526.4.1.3.2.5,NETGEAR-ME-MIB::wirelessAPIfWLANBroadcastPacketsIn,Counter32,read-only,,mandatory,,Broadcast traffic received via WLAN by the wireless AP in packets
.1.3.6.1.4.1.4526.4.1.3.2.6,NETGEAR-ME-MIB::wirelessAPIfWLANBroadcastPacketsOut,Counter32,read-only,,mandatory,,Broadcast traffic transmitted via WLAN by the wireless AP in packets
.1.3.6.1.4.1.4526.4.1.3.2.7,NETGEAR-ME-MIB::wirelessAPIfWLANMulticastPacketsIn,Counter32,read-only,,mandatory,,Multicast traffic received via WLAN by the wireless AP in packets
.1.3.6.1.4.1.4526.4.1.3.2.8,NETGEAR-ME-MIB::wirelessAPIfWLANMulticastPacketsOut,Counter32,read-only,,mandatory,,Multicast traffic transmitted via WLAN by the wireless AP in packets
.1.3.6.1.4.1.4526.4.1.3.2.9,NETGEAR-ME-MIB::wirelessAPIfWLANThroughputIn,Counter32,read-only,,mandatory,,Throughtput-in at WLAN transmitted by the wireless AP in the unit of B/s
.1.3.6.1.4.1.4526.4.1.3.2.10,NETGEAR-ME-MIB::wirelessAPIfWLANThroughputOut,Counter32,read-only,,mandatory,,Throughtput-out at WLAN transmitted by the wireless AP in the unit of B/s
.1.3.6.1.4.1.4526.4.1.3.2.11,NETGEAR-ME-MIB::wirelessAPIfWLANPacketsIn,Counter32,read-only,,mandatory,,Total in-packets at WLAN received by the wireless AP in packets
.1.3.6.1.4.1.4526.4.1.3.2.12,NETGEAR-ME-MIB::wirelessAPIfWLANPacketsOut,Counter32,read-only,,mandatory,,Total out-packets at WLAN transmitted by the wireless AP in packets
.1.3.6.1.4.1.4526.4.1.3.2.13,NETGEAR-ME-MIB::wirelessAPIfWLANTrafficResetCounter,INTEGER,read-write,,mandatory,false(0):true(1),Reset the WLAN interface 's counters, they will start from 0 again.
.1.3.6.1.4.1.4526.4.1.4,NETGEAR-ME-MIB::wirelessAPIfSettingsGroup,,,,,,
.1.3.6.1.4.1.4526.4.1.4.1,NETGEAR-ME-MIB::wirelessAPDHCPClientObtainIPchoice,INTEGER,read-write,,mandatory,static(0):automatic(1),Wireless Access Point DHCP Client Obtain an IP address choice
.1.3.6.1.4.1.4526.4.1.4.2,NETGEAR-ME-MIB::wirelessAPDHCPClientIPaddr,IpAddress,read-only,,mandatory,,Wireless Access Point DHCP Client IP address
.1.3.6.1.4.1.4526.4.1.4.3,NETGEAR-ME-MIB::wirelessAPDHCPClientIPsubnetMask,IpAddress,read-only,,mandatory,,Wireless Access Point DHCP Client IP subnet mask
.1.3.6.1.4.1.4526.4.1.4.4,NETGEAR-ME-MIB::wirelessAPDHCPClientGateway,IpAddress,read-only,,mandatory,,Wireless Access Point DHCP Client gateway
.1.3.6.1.4.1.4526.4.1.4.5,NETGEAR-ME-MIB::wirelessAPDHCPClientPriDNS,IpAddress,read-only,,mandatory,,Wireless Access Point DHCP Client primary DNS
.1.3.6.1.4.1.4526.4.1.4.6,NETGEAR-ME-MIB::wirelessAPDHCPClientSecDNS,IpAddress,read-only,,mandatory,,Wireless Access Point DHCP Client secondary DNS
.1.3.6.1.4.1.4526.4.1.4.7,NETGEAR-ME-MIB::wirelessAPDHCPClientStaticIPaddr,IpAddress,read-write,,mandatory,,Wireless Access Point DHCP Client static IP address
.1.3.6.1.4.1.4526.4.1.4.8,NETGEAR-ME-MIB::wirelessAPDHCPClientStaticIPsubnetMask,IpAddress,read-write,,mandatory,,Wireless Access Point DHCP Client static IP subnet mask
.1.3.6.1.4.1.4526.4.1.4.9,NETGEAR-ME-MIB::wirelessAPDHCPClientStaticGateway,IpAddress,read-write,,mandatory,,Wireless Access Point DHCP Client static gateway
.1.3.6.1.4.1.4526.4.1.4.10,NETGEAR-ME-MIB::wirelessAPDHCPClientStaticPriDNS,IpAddress,read-write,,mandatory,,Wireless Access Point DHCP Client static primary DNS
.1.3.6.1.4.1.4526.4.1.4.11,NETGEAR-ME-MIB::wirelessAPDHCPClientStaticSecDNS,IpAddress,read-write,,mandatory,,Wireless Access Point DHCP Client static secondary DNS
.1.3.6.1.4.1.4526.4.1.4.12,NETGEAR-ME-MIB::wirelessAPName,OCTET,read-write,,mandatory,,Wireless Access Point Name
.1.3.6.1.4.1.4526.4.1.4.13,NETGEAR-ME-MIB::wirelessAPWINSchoice,INTEGER,read-write,,mandatory,disAbled(0):enAbled(1),Wireless Access Point WINS choice
.1.3.6.1.4.1.4526.4.1.4.14,NETGEAR-ME-MIB::wirelessAPWINSServerName,OCTET,read-write,,mandatory,,WINS Server Name
.1.3.6.1.4.1.4526.4.1.5,NETGEAR-ME-MIB::wirelessAPWirelessSettingsGroup,,,,,,
.1.3.6.1.4.1.4526.4.1.5.1,NETGEAR-ME-MIB::wirelessAPCountryDomain,INTEGER,read-write,,mandatory,none(0):africa(1):asia(2):australia(3):canada(4):europe(5):france(6):israel(7):japan(8):mexico(9):southAmerica(10):usa(11),Wireless Access Point Country Domain
.1.3.6.1.4.1.4526.4.1.5.2,NETGEAR-ME-MIB::wirelessAPChannelNo,INTEGER,read-write,,mandatory,,Wireless Access Point Channel No
.1.3.6.1.4.1.4526.4.1.5.3,NETGEAR-ME-MIB::wirelessAPSSID,OCTET,read-write,,mandatory,,Wireless Access Point SSID
.1.3.6.1.4.1.4526.4.1.5.7,NETGEAR-ME-MIB::wirelessAPPassphrase,OCTET,read-write,,mandatory,,Wireless AP Passphrase
.1.3.6.1.4.1.4526.4.1.5.8,NETGEAR-ME-MIB::wirelessAPGenerateKeysEnabled,INTEGER,read-write,,mandatory,disAbled(0):enAbled(1),Wireless Access Point Generate Keys
.1.3.6.1.4.1.4526.4.1.5.9,NETGEAR-ME-MIB::wirelessAPKeysSet,,,,,,
.1.3.6.1.4.1.4526.4.1.5.9.1,NETGEAR-ME-MIB::wirelessAPKeysSetTable,,not-accessible,,mandatory,,Wireless Access Point Keys Set Table Object
.1.3.6.1.4.1.4526.4.1.5.9.1.1,NETGEAR-ME-MIB::wirelessAPKeysSetEntry,,not-accessible,wirelessAPKeysSetEnabled,mandatory,,An entry containing information for Wireless Access Point 
.1.3.6.1.4.1.4526.4.1.5.9.1.1.2,NETGEAR-ME-MIB::wirelessAPKeysSetEnabled,INTEGER,read-write,,mandatory,disAbled(0):enAbled(1),Enabled or Disabled a Wireless Access Point Key
.1.3.6.1.4.1.4526.4.1.5.9.1.1.3,NETGEAR-ME-MIB::wirelessAPKeys,OCTET,read-write,,mandatory,,Wireless AP Key
.1.3.6.1.4.1.4526.4.1.5.10,NETGEAR-ME-MIB::wirelessAPBasicRateChoice,INTEGER,read-write,,mandatory,auto(0):fixed(1),Wireless AP Basic Rate selection: auto(0) means 
.1.3.6.1.4.1.4526.4.1.5.11,NETGEAR-ME-MIB::wirelessAPFixedRate,,,,,,
.1.3.6.1.4.1.4526.4.1.5.11.1,NETGEAR-ME-MIB::wirelessAPFixedRate1,INTEGER,read-write,,mandatory,oneM-disabled(0):oneM-enabled(1),If wirelessAPBasicRateChoice is set to auto(0), then the 
.1.3.6.1.4.1.4526.4.1.5.11.2,NETGEAR-ME-MIB::wirelessAPFixedRate2,INTEGER,read-write,,mandatory,twoM-disabled(0):twoM-enabled(1),If wirelessAPBasicRateChoice is set to auto(0), then the 
.1.3.6.1.4.1.4526.4.1.5.11.3,NETGEAR-ME-MIB::wirelessAPFixedRate5-5,INTEGER,read-write,,mandatory,fiveDotFiveM-disabled(0):fiveDotFiveM-enabled(1),If wirelessAPBasicRateChoice is set to auto(0), then the 
.1.3.6.1.4.1.4526.4.1.5.11.4,NETGEAR-ME-MIB::wirelessAPFixedRate11,INTEGER,read-write,,mandatory,elevenM-disabled(0):elevenM-enabled(1),If wirelessAPBasicRateChoice is set to auto(0), then the 
.1.3.6.1.4.1.4526.4.1.5.12,NETGEAR-ME-MIB::wirelessAPRTSThreshold,INTEGER,read-write,,mandatory,,The value in this object should be the same as IEEE 802.11 
.1.3.6.1.4.1.4526.4.1.5.13,NETGEAR-ME-MIB::wirelessAPFragmentationThreshold,INTEGER,read-write,,mandatory,,The value in this object should be the same as IEEE 802.11 
.1.3.6.1.4.1.4526.4.1.5.14,NETGEAR-ME-MIB::wirelessAPBeaconPeriod,INTEGER,read-write,,mandatory,,The value in this object should be the same as IEEE 802.11 
.1.3.6.1.4.1.4526.4.1.5.15,NETGEAR-ME-MIB::wirelessAPShortPreambleOptionImplemented,INTEGER,read-write,,mandatory,short(0):long(1), The value of this object is 0 denoting that the short preamble used,  1 denoting that the long preamble used.
.1.3.6.1.4.1.4526.4.1.5.16,NETGEAR-ME-MIB::wirelessAPAntennaSelection,INTEGER,read-write,,mandatory,primary(1):secondary(2):diversity(3),Antenna Selection
.1.3.6.1.4.1.4526.4.1.5.17,NETGEAR-ME-MIB::wirelessAPMaximumTransmitPowerLevel,INTEGER,read-write,,mandatory,eighteendbm(1):seventeendbm(2):fifteendbm(3):thirteendbm(4):sevendbm(5):zerodbm(6),The value in this object should be the same as IEEE 802.11 
.1.3.6.1.4.1.4526.4.1.5.18,NETGEAR-ME-MIB::wirelessAPOperatingMode,INTEGER,read-write,,mandatory,eight0twoDot1xAP(0):noneight0twoDot1xAP(1),Operating Mode
.1.3.6.1.4.1.4526.4.1.5.19,NETGEAR-ME-MIB::wirelessAPSSIDEnabled,INTEGER,read-write,,mandatory,disAbled(0):enAbled(1),Enabled or disabled Wireless Access Point Broadcast 
.1.3.6.1.4.1.4526.4.1.6,NETGEAR-ME-MIB::wirelessAPSecuritySettingsGroup,,,,,,
.1.3.6.1.4.1.4526.4.1.6.1,NETGEAR-ME-MIB::wirelessAP802dot1xSecurityEnabled,INTEGER,read-write,,mandatory,enAbled(0):disAbled(1),802.1x Security enabled or disabled
.1.3.6.1.4.1.4526.4.1.6.2,NETGEAR-ME-MIB::wirelessAPEAPauthType,INTEGER,read-write,,mandatory,NotAllowEAP-MD5(0):AllowEAP-MD5(1),Operating Mode
.1.3.6.1.4.1.4526.4.1.6.3,NETGEAR-ME-MIB::wirelessAPRadiusServer,OCTET,read-write,,mandatory,,Radius Server Name/IP Address
.1.3.6.1.4.1.4526.4.1.6.4,NETGEAR-ME-MIB::wirelessAPRadiusPort,INTEGER,read-write,,mandatory,,Radius Port
.1.3.6.1.4.1.4526.4.1.6.5,NETGEAR-ME-MIB::wirelessAPSharedKey,OCTET,read-write,,mandatory,,Radius Server Shared Key
.1.3.6.1.4.1.4526.4.1.6.7,NETGEAR-ME-MIB::wirelessAPRadiusServer2,OCTET,read-write,,mandatory,,Radius Server Name/IP Address
.1.3.6.1.4.1.4526.4.1.6.11,NETGEAR-ME-MIB::wirelessAPRadAccountPort,INTEGER,read-write,,mandatory,,Radius Accounting Port
.1.3.6.1.4.1.4526.4.1.6.16,NETGEAR-ME-MIB::wirelessAPKeyExchange,INTEGER,read-write,,mandatory,disAbled(0):enAbled(1),AP Key Exchange enabled or disabled
.1.3.6.1.4.1.4526.4.1.6.17,NETGEAR-ME-MIB::wirelessAPKeyExchangeKeylife,INTEGER,read-write,,mandatory,,AP exchanged key lifetime
.1.3.6.1.4.1.4526.4.1.6.18,NETGEAR-ME-MIB::wirelessAPRadAccountEnable,INTEGER,read-write,,mandatory,disAbled(0):enAbled(1),AP Radius Accounting enabled or disabled
.1.3.6.1.4.1.4526.4.1.6.19,NETGEAR-ME-MIB::wirelessAPMacAuthEnable,INTEGER,read-write,,mandatory,disAbled(0):enAbled(1),AP Mac Authentication enabled or disabled
.1.3.6.1.4.1.4526.4.1.6.21,NETGEAR-ME-MIB::wirelessAPRadAccountUpdateEnable,INTEGER,read-write,,mandatory,disAbled(0):enAbled(1),AP Radius Account Update enabled or disabled
.1.3.6.1.4.1.4526.4.1.6.22,NETGEAR-ME-MIB::wirelessAPRadAccountUpdatePeriod,INTEGER,read-write,,mandatory,,AP Radius Account Update Period
.1.3.6.1.4.1.4526.4.1.6.23,NETGEAR-ME-MIB::wirelessAPRadAccountIdlePeriod,INTEGER,read-write,,mandatory,,Idle timer for AP not receiving any traffic from a wireless station to perform a dissociation
.1.3.6.1.4.1.4526.4.1.6.25,NETGEAR-ME-MIB::wirelessTIOperateMode,INTEGER,read-write,,mandatory,WirelessAccessPoint(0):Point-to-PointBridge(4):Point-to-Multi-PointBridge(5):ClientAccessPoint(3):RepeaterAccessPoint(2),AP Operation Mode
.1.3.6.1.4.1.4526.4.1.6.26,NETGEAR-ME-MIB::wirelessTIDstMac,OCTET,read-write,,mandatory,,The Destination Address When one operation mode is selected which the remote address necessary.
.1.3.6.1.4.1.4526.4.1.6.28,NETGEAR-ME-MIB::wirelessTIIsolation,INTEGER,read-write,,mandatory,off(0):on(1),AP Wireless Separation Setting
.1.3.6.1.4.1.4526.4.1.6.29,NETGEAR-ME-MIB::wirelessTIEnable80211d,INTEGER,read-write,,mandatory,off(0):on(1),AP Worldwide Mode Setting
.1.3.6.1.4.1.4526.4.1.6.37,NETGEAR-ME-MIB::wirelessAPSecurityMode,INTEGER,read-write,,mandatory,OPEN-DISABLE-MODE(0):OPEN-64WEP-MODE(1):OPEN-128WEP-MODE(2):SHARED-64WEP-MODE(3):SHARED-128WEP-MODE(4),AP Security Mode Setting, can take the place of AP Authentication and Encryption Setting Logic Relation.
.1.3.6.1.4.1.4526.4.2,BROADCOM-REF-MIB::wg302,,,,,,
.1.3.6.1.4.1.4526.4.2.1,WG302-MIB::lanSettings,,,,,,
.1.3.6.1.4.1.4526.4.2.1.1,WG302-MIB::apName,OCTET,read-write,,current,,The field indicates the name of AP.
.1.3.6.1.4.1.4526.4.2.1.4,WG302-MIB::dhcpStatus,INTEGER,read-write,,current,static(0):dhcpclient(1),This attribute shall indicate whether dhcp client status.
.1.3.6.1.4.1.4526.4.2.1.5,WG302-MIB::ipAddr,IpAddress,read-write,,current,,The field indicates the IP address of AP on the wireless interface,when worked in router or router/bridge mode. Ethernet and wireless interface share the same IP address, when worked in bridge mode. 
.1.3.6.1.4.1.4526.4.2.1.6,WG302-MIB::netmaskAddr,IpAddress,read-write,,current,,The field indicates the netmask of AP on the wireless interface,when worked in router or router/bridge mode. Ethernet and wireless interface share the same netmask address,when worked in bridge mode. 
.1.3.6.1.4.1.4526.4.2.1.7,WG302-MIB::gatewayAddr,IpAddress,read-write,,current,,The field indicates the gateway of AP on the wireless interface,when worked in router or router/bridge mode. Ethernet and wireless interface share the same gateway address,when worked in bridge mode. 
.1.3.6.1.4.1.4526.4.2.1.8,WG302-MIB::spantree,INTEGER,read-write,,current,true(1):false(2),This attribute shall indicate spanning tree.
.1.3.6.1.4.1.4526.4.2.2,WG302-MIB::wlanSettingTable,,not-accessible,,current,,wlanSettingsallow for multiple instances on an agent.
.1.3.6.1.4.1.4526.4.2.2.1,WG302-MIB::wlanSettingEntry,,not-accessible,ifIndex,current,,An entry in the wlanSettingTable. It is possible for there to be multiple AP interfaces on one agent, each with its unique MAC address. The relationship between an AP interface and an interface in the context of the Internet-standard MIB is one-to-one. As such, the value of an ifIndex object instance can be directly used to identify corresponding instances of the objects defined herein. 
.1.3.6.1.4.1.4526.4.2.2.1.1,WG302-MIB::operatemode,INTEGER,read-write,,current,auto(0):dot11b(2):dot11g(3),This attribute shall indicate the desired wireless operating mode. The option are: Auto - Both 802.11g and 802.11b wireless stations can be used. dot11b - All 802.11b wireless stations can be used. 802.11g wireless stations can still be used if they can operate in 802.11b mode. dot11g - Only 802.11g wireless stations can be used.
.1.3.6.1.4.1.4526.4.2.2.1.2,WG302-MIB::ssid,OCTET,read-write,,current,,This attribute shall indicate SSID.Its length can't be large than 33 .
.1.3.6.1.4.1.4526.4.2.2.1.3,WG302-MIB::countrycode,INTEGER,read-write,,current,Asia(410):Australia(36):Canada(124):Denmark(208):Europe(40):Finland(246):France(250):Germany(276):Ireland(372):Italy(380):Japan(392):Mexico(484):Netherlands(528):Newzealand(554):Norway(578):PuertoRico(630):SouthAmerica(344):Spain(724):Sweden(752):Switzerland(756):UnitedKingdom(826):UnitedStates(840),This attribute shall indicate the region of operation for which which the wireless interface is inted. =410: Asia =36: Australia =124: Canada =208: Denmark =40: Europe =246: Finland =250: France =276: Germany =372: Ireland =380: Italy =392: Japan =484: Mexico =528: Netherlands =554: New zealand =578: Norway =630: Puerto rico =756: Switzerland =344: South America =724: Spain =752: Sweden =826: UnitedKingdom =840: USA
.1.3.6.1.4.1.4526.4.2.2.1.4,WG302-MIB::channel,INTEGER,read-write,,current,,This attribute shall indicate the channel number to use on your Wireless LAN. 1: CH01 2412MHz
.1.3.6.1.4.1.4526.4.2.2.1.5,WG302-MIB::datarate,OCTET,read-write,,current,,This attribute shall indicate the transmite rate. When operatemode is dot11b(2) can set to
.1.3.6.1.4.1.4526.4.2.2.1.6,WG302-MIB::beaconinterval,INTEGER,read-write,,current,,This attribute shall indicate the Beacon Interval.
.1.3.6.1.4.1.4526.4.2.2.1.7,WG302-MIB::rtsthreshold,INTEGER,read-write,,current,,This attribute shall indicate the RTS threshold.
.1.3.6.1.4.1.4526.4.2.2.1.8,WG302-MIB::fraglength,INTEGER,read-write,,current,,This attribute shall indicate the fragmentation threshold.
.1.3.6.1.4.1.4526.4.2.2.1.9,WG302-MIB::dtiminterval,INTEGER,read-write,,current,,This attribute shall indicate the DTIM period.
.1.3.6.1.4.1.4526.4.2.2.1.10,WG302-MIB::preambletype,INTEGER,read-write,,current,long(0):auto(1),This attribute shall indicate the preamble setting.
.1.3.6.1.4.1.4526.4.2.2.1.11,WG302-MIB::hidenetworkname,INTEGER,read-write,,current,true(1):false(2),This attribute shall indicate whether broadcast wireless network Name (SSID).
.1.3.6.1.4.1.4526.4.2.2.1.12,WG302-MIB::txpower,INTEGER,read-write,,current,full(0):half(1):quarter(2):eighth(3):min(4),This attribute shall indicate the tranmiste power.
.1.3.6.1.4.1.4526.4.2.2.1.13,WG302-MIB::superG,INTEGER,read-write,,current,true(1):false(2),This attribute shall indicate whether super-G.
.1.3.6.1.4.1.4526.4.2.2.1.14,WG302-MIB::antenna,INTEGER,read-write,,current,Auto(0):primary(1):secondary(2),This attribute shall indicate the tranmiste power.
.1.3.6.1.4.1.4526.4.2.3,WG302-MIB::securityTable,,not-accessible,,current,,Security attributes. In tablular form to allow for multiple instances on an agent.
.1.3.6.1.4.1.4526.4.2.3.1,WG302-MIB::securityEntry,,not-accessible,ifIndex,current,,An entry in the securityTable. It is possible for there to be multiple AP interfaces on one agent, each with its unique MAC address. The relationship between an AP interface and an interface in the context of the Internet-standard MIB is one-to-one. As such, the value of an ifIndex object instance can be directly used to identify corresponding instances of the objects defined herein. 
.1.3.6.1.4.1.4526.4.2.3.1.1,WG302-MIB::authenticationtype,INTEGER,read-write,,current,open(0):shared(1):Legacy802dot1x(100):WPA(101):WPAPSK(102),The field indicates how to authenticate the station
.1.3.6.1.4.1.4526.4.2.3.1.2,WG302-MIB::encryptionstrength,INTEGER,read-write,,current,none(0):wep64(40):wep128(104):wep152(128):TKIP(255),The field indicates the key length of default keys.
.1.3.6.1.4.1.4526.4.2.3.1.3,WG302-MIB::keyno,INTEGER,read-write,,current,,The field indicates the number of default wep key.
.1.3.6.1.4.1.4526.4.2.3.1.4,WG302-MIB::key1,OCTET,read-write,,current,,The field indicates the key value of the first default wep key.
.1.3.6.1.4.1.4526.4.2.3.1.5,WG302-MIB::key2,OCTET,read-write,,current,,The field indicates the key value of the second default wep key.
.1.3.6.1.4.1.4526.4.2.3.1.6,WG302-MIB::key3,OCTET,read-write,,current,,The field indicates the key value of the third default wep key.
.1.3.6.1.4.1.4526.4.2.3.1.7,WG302-MIB::key4,OCTET,read-write,,current,,The field indicates the key value of the fourth default wep key.
.1.3.6.1.4.1.4526.4.2.3.1.8,WG302-MIB::wlanseparator,INTEGER,read-write,,current,true(1):false(2),This attribute shall indicate whether enable No see.
.1.3.6.1.4.1.4526.4.2.3.1.9,WG302-MIB::presharekey,OCTET,read-write,,current,,This attribute shall indicate preshare key.
.1.3.6.1.4.1.4526.4.2.4,WG302-MIB::remoteSettings,,,,,,
.1.3.6.1.4.1.4526.4.2.4.1,WG302-MIB::sshd,INTEGER,read-write,,current,true(1):false(2),This attribute shall indicate whether enable sshd.
.1.3.6.1.4.1.4526.4.2.4.2,WG302-MIB::snmpenable,INTEGER,read-write,,current,true(1):false(2),This attribute shall indicate whether enable snmp.
.1.3.6.1.4.1.4526.4.2.4.3,WG302-MIB::trapServerIP,IpAddress,read-write,,current,,The field indicates the trap server IP address. ***The value can only be set to a IP address in dot format.
.1.3.6.1.4.1.4526.4.2.4.4,WG302-MIB::readOnlyCommunity,OCTET,read-write,,current,,The field indicates the read only community name. ***The value can only be set to 1 to 32 readable string.
.1.3.6.1.4.1.4526.4.2.4.5,WG302-MIB::readWriteCommunity,OCTET,read-write,,current,,The field indicates the read write community name. ***The value can only be set to 1 to 32 readable string.
.1.3.6.1.4.1.4526.4.2.5,WG302-MIB::statistic,,,,,,
.1.3.6.1.4.1.4526.4.2.5.1,WG302-MIB::wiredethernetstat,,,,,,
.1.3.6.1.4.1.4526.4.2.5.1.1,WG302-MIB::lanrecvpacket,Unsigned32,read-only,,current,,the field indicates the sum of received packets.
.1.3.6.1.4.1.4526.4.2.5.1.2,WG302-MIB::lantranspacket,Unsigned32,read-only,,current,,the field indicates the sum of transmitted packets.
.1.3.6.1.4.1.4526.4.2.5.1.3,WG302-MIB::lanrecvbytes,Unsigned32,read-only,,current,,the field indicates the sum of received bytes.
.1.3.6.1.4.1.4526.4.2.5.1.4,WG302-MIB::lantransbytes,Unsigned32,read-only,,current,,the field indicates the sum of transmitted bytes.
.1.3.6.1.4.1.4526.4.2.5.2,WG302-MIB::wirelessstat,,,,,,
.1.3.6.1.4.1.4526.4.2.5.2.1,WG302-MIB::wlanrecvunicastpacket,Unsigned32,read-only,,current,,the field indicates the sum of received unicast packets.
.1.3.6.1.4.1.4526.4.2.5.2.2,WG302-MIB::wlantransunicastpacket,Unsigned32,read-only,,current,,the field indicates the sum of transmitted unicast packets.
.1.3.6.1.4.1.4526.4.2.5.2.3,WG302-MIB::wlanrecvbroadcastpacket,Unsigned32,read-only,,current,,the field indicates the sum of received broadcast packets.
.1.3.6.1.4.1.4526.4.2.5.2.4,WG302-MIB::wlantransbroadcastpacket,Unsigned32,read-only,,current,,the field indicates the sum of transmitted broadcast packets.
.1.3.6.1.4.1.4526.4.2.5.2.5,WG302-MIB::wlanrecvmulticastpacket,Unsigned32,read-only,,current,,the field indicates the sum of received multicast packets.
.1.3.6.1.4.1.4526.4.2.5.2.6,WG302-MIB::wlantransmulticastpacket,Unsigned32,read-only,,current,,the field indicates the sum of transmitted multicast packets.
.1.3.6.1.4.1.4526.4.2.5.2.7,WG302-MIB::wlanrecvpacket,Unsigned32,read-only,,current,,the field indicates the sum of received packets.
.1.3.6.1.4.1.4526.4.2.5.2.8,WG302-MIB::wlantranspacket,Unsigned32,read-only,,current,,the field indicates the sum of transmitted packets.
.1.3.6.1.4.1.4526.4.2.5.2.9,WG302-MIB::wlanrecvbytes,Unsigned32,read-only,,current,,the field indicates the sum of received bytes.
.1.3.6.1.4.1.4526.4.2.5.2.10,WG302-MIB::wlantransbytes,Unsigned32,read-only,,current,,the field indicates the sum of transmitted bytes.
.1.3.6.1.4.1.4526.4.2.5.2.11,WG302-MIB::stationnumber,Unsigned32,read-only,,current,,This attribute shall indicate the stations count.
.1.3.6.1.4.1.4526.4.2.6,WG302-MIB::stationListTable,,not-accessible,,current,,stationList Table show multiple instances on an agent.
.1.3.6.1.4.1.4526.4.2.6.1,WG302-MIB::stationListEntry,,not-accessible,ifIndex,current,,stationlist Entry show the connected station status 
.1.3.6.1.4.1.4526.4.2.6.1.1,WG302-MIB::macaddress,OCTET,read-only,,current,,This attribute shall indicate the stationID.
.1.3.6.1.4.1.4526.4.2.6.1.2,WG302-MIB::stationstatus,INTEGER,read-only,,current,none(0):authenticating(1):authenticated(2):associating(3):associated(4),This attribute shall indicate the status of station.
.1.3.6.1.4.1.4526.4.2.7.1,WG302-MIB::apmode,INTEGER,read-write,,current,AP(0):PTP(2):PXP(3):Repeater(4),This a command field for conntrol AP operation mode. 
.1.3.6.1.4.1.4526.4.2.7.2,WG302-MIB::ptpmode,,,,,,
.1.3.6.1.4.1.4526.4.2.7.2.1,WG302-MIB::enableptpwlanclientasoc,INTEGER,read-write,,current,true(1):false(2),This a command field for conntrol AP operation mode. 
.1.3.6.1.4.1.4526.4.2.7.2.2,WG302-MIB::ptpremotemacaddress,OCTET,read-write,,current,,This attribute shall indicate the stationID.
.1.3.6.1.4.1.4526.4.2.7.3,WG302-MIB::pxpmode,,,,,,
.1.3.6.1.4.1.4526.4.2.7.3.1,WG302-MIB::enablepxpwlanclientasoc,INTEGER,read-write,,current,true(1):false(2),This a command field for conntrol AP operation mode. 
.1.3.6.1.4.1.4526.4.2.7.3.2,WG302-MIB::pxpremotemacaddress1,OCTET,read-write,,current,,This attribute shall indicate the stationID.
.1.3.6.1.4.1.4526.4.2.7.3.3,WG302-MIB::pxpremotemacaddress2,OCTET,read-write,,current,,This attribute shall indicate the stationID.
.1.3.6.1.4.1.4526.4.2.7.3.4,WG302-MIB::pxpremotemacaddress3,OCTET,read-write,,current,,This attribute shall indicate the stationID.
.1.3.6.1.4.1.4526.4.2.7.3.5,WG302-MIB::pxpremotemacaddress4,OCTET,read-write,,current,,This attribute shall indicate the stationID.
.1.3.6.1.4.1.4526.4.2.7.4,WG302-MIB::repeatermode,,,,,,
.1.3.6.1.4.1.4526.4.2.7.4.1,WG302-MIB::repremotemacaddress1,OCTET,read-write,,current,,This attribute shall indicate the stationID.
.1.3.6.1.4.1.4526.4.2.7.4.2,WG302-MIB::repremotemacaddress2,OCTET,read-write,,current,,This attribute shall indicate the stationID.
.1.3.6.1.4.1.4526.4.2.7.4.3,WG302-MIB::repremotemacaddress3,OCTET,read-write,,current,,This attribute shall indicate the stationID.
.1.3.6.1.4.1.4526.4.2.7.4.4,WG302-MIB::repremotemacaddress4,OCTET,read-write,,current,,This attribute shall indicate the stationID.
.1.3.6.1.4.1.4526.4.2.8,WG302-MIB::info802dot1x,,,,,,
.1.3.6.1.4.1.4526.4.2.8.1,WG302-MIB::authinfo,,,,,,
.1.3.6.1.4.1.4526.4.2.8.1.1,WG302-MIB::PriRadIpAddr,IpAddress,read-write,,current,,Internet address of the Primary Radius Server.
.1.3.6.1.4.1.4526.4.2.8.1.2,WG302-MIB::PriRadPort,INTEGER,read-write,,current,,Port number used for authentication at the
.1.3.6.1.4.1.4526.4.2.8.1.3,WG302-MIB::PriRadSharedSecret,OCTET,read-write,,current,,Secret shared between NAS and the
.1.3.6.1.4.1.4526.4.2.8.1.4,WG302-MIB::SndRadIpAddr,IpAddress,read-write,,current,,Internet address of the Second Radius Server.
.1.3.6.1.4.1.4526.4.2.8.1.5,WG302-MIB::SndRadPort,INTEGER,read-write,,current,,Port number used for authentication at
.1.3.6.1.4.1.4526.4.2.8.1.6,WG302-MIB::SndRadSharedSecret,OCTET,read-write,,current,,Secret shared between NAS and the
.1.3.6.1.4.1.4526.4.2.8.1.7,WG302-MIB::reauthtime,INTEGER,read-write,,current,,Current Login Status.
.1.3.6.1.4.1.4526.4.2.8.2,WG302-MIB::accntinfo,,,,,,
.1.3.6.1.4.1.4526.4.2.8.2.1,WG302-MIB::PriAcntIpAddr,IpAddress,read-write,,current,,IP address of the Primary radius account server.
.1.3.6.1.4.1.4526.4.2.8.2.2,WG302-MIB::PriAcntPort,INTEGER,read-write,,current,,port number of the Primary radius account server.
.1.3.6.1.4.1.4526.4.2.8.2.3,WG302-MIB::PriAcntSharedSecret,OCTET,read-write,,current,,password used by the ap to connect to
.1.3.6.1.4.1.4526.4.2.8.2.4,WG302-MIB::SndAcntIpAddr,IpAddress,read-write,,current,,IP address of the Second radius account server.
.1.3.6.1.4.1.4526.4.2.8.2.5,WG302-MIB::SndAcntPort,INTEGER,read-write,,current,,port number of the Second radius account server.
.1.3.6.1.4.1.4526.4.2.8.2.6,WG302-MIB::SndAcntSharedSecret,OCTET,read-write,,current,,password used by the ap to connect to
.1.3.6.1.4.1.4526.4.2.9,WG302-MIB::userCommand,,,,,,
.1.3.6.1.4.1.4526.4.2.9.1,WG302-MIB::resetAP,INTEGER,read-write,,current,,This a command field for conntrol AP action. Write any value to reset the AP.
.1.3.6.1.4.1.4526.4.2.9.2,WG302-MIB::setWirelessstatus,INTEGER,read-write,,current,true(1):false(2),This a command field for conntrol AP's wireless card action. 0: enable wireless card 1: disable wireless card
.1.3.6.1.4.1.4526.4.3,BROADCOM-REF-MIB::wg102,,,,,,
.1.3.6.1.4.1.4526.4.3.1,WG102::sysSettings,,,,,,
.1.3.6.1.4.1.4526.4.3.1.1,WG102::sysMacAddress,OCTET,read-only,,current,,This field indicates the system MAC Address.
.1.3.6.1.4.1.4526.4.3.1.2,WG102::sysVersion,OCTET,read-only,,current,,This field indicates the system firmware version.
.1.3.6.1.4.1.4526.4.3.1.3,WG102::sysAPName,OCTET,read-write,,current,,This field indicates the name of AP. The name is also the
.1.3.6.1.4.1.4526.4.3.1.4,WG102::sysAdminName,OCTET,read-only,,current,,This field indicates the administrator name, which is used
.1.3.6.1.4.1.4526.4.3.1.5,WG102::sysAdminPasswd,OCTET,read-only,,current,,This field indicates the administrator password, which is
.1.3.6.1.4.1.4526.4.3.1.7,WG102::sysCountryRegion,INTEGER,read-write,,current,asia(410):australia(36):canada(124):denmark(208):europe(40):finland(246):france(250):germany(276):ireland(372):italy(380):japan(392):mexico(484):netherlands(528):newZealand(554):norway(578):puertoRico(630):southAmerica(340):spain(724):sweden(752):switzerland(756):unitedKingdom(826):unitedStates(840),This field indicates the country/region of the AP.
.1.3.6.1.4.1.4526.4.3.1.8,WG102::timeSettings,,,,,,
.1.3.6.1.4.1.4526.4.3.1.8.1,WG102::timeCurrentTime,OCTET,read-only,,current,,This field indicates the current system time in a format:
.1.3.6.1.4.1.4526.4.3.1.8.2,WG102::timeTimeZone,INTEGER,read-write,,current,gmt00UkGreenWichCasablancaMonrovia(0):gmtwest12EniwetokKwajalein(1):gmtwest11MidwayIslandSamoa(2):gmtwest10Hawaii(3):gmtwest9dot5MarqesasIs(4):gmtwest09Alaska(5):gmtwest8dot5PitciarnIs(6):gmtwest08PacificTimeUsCanada(7):gmtwest07MountainTimeUsArizona(8):gmtwest06CentralTimeUsMexicoCityTequciqalpa(9):gmtwest05EasternTimeUsBogotaLimaQuitoIndianaEast(10):gmtwest04CaracasLaPaz(11):gmtwest3dot5Newfoundland(12):gmtwest03BrasiliaBeunosAiresGeorgetown(13):gmtwest02MidAtlantic(14):gmtwest01AzoresCapeVerdeIs(15):gmteast01Europe(16):gmteast02EgyptFinlandRomaniaTurkeyGreeceIsraelJordan(17):gmteast03IraqSyriaRussia(18):gmteast3dot5Iran(19):gmteast04ArmeniaAzerbaijan(20):gmteast4dot5Afghanistan(21):gmteast05RussiaPakistan(22):gmteast5dot5India(23):gmteast06BangladeshRussia(24):gmteast6dot5Burma(25):gmteast07RussiaThailandCombodiaLaos(26):gmteast08RussiaChinaMongoliaIndonesiaPhilippinesTaiwanWA(27):gmteast09RussiaJapanKorea(28):gmteast9dot5AdelaideDarwin(29):gmteast10EasternStandardAustRussiaGaumPapuaNewGuinea(30),This field indicates the timezone of the system. -12 Eniwetok,Kwajalein (GMT-12:00), -11 Midway I., Samoa (GMT-11:00), -10 Hawaii (GMT-10:00), -9.5 Marqesas Is. (GMT-09:30), -9 Alaska (GMT-09:00), -8.5 Pitciarn Is. (GMT-08:30), -8 Pacific Time ..US and Canada (GMT-08:00), -7 MountainTime(USA),Arizona (GMT-07:00), -6 CentralTime(USA),Mexico City,Tequciqalpa (GMT-06:00), -5 EasternTime(USA),Bogota,Lima,Quito,Indiana East (GMT-05:00), -4 Caracas,La Paz (GMT-04:00), -3.5 Newfoundland (GMT-03:30), -3 Brasilia,Beunos Aires,Georgetown (GMT-03:00), -2 Mid-Atlantic (GMT-02:00), -1 Azores,Cape Verde Is. (GMT-01:00), 1 Europe (GMT+01:00), 2 Egypt,Finland,Romania,Turkey,Greece,Israel,Jordan(GMT+02:00), 3 Iraq, Syria,Russia (GMT+03:00), 3.5 Iran (GMT+03:30), 4 Armenia, Azerbaijan (GMT+04:00), 4.5 Afghanistan (GMT+04:30), 5 Russia,Pakistan (GMT+05:00), 5.5 India (GMT+05:30), 6 Bangladesh,Russia (GMT+06:00), 6.5 Burma (GMT+06:30), 7 Russia,Thailand, Combodia, Laos (GMT+07:00), 8 Russia,China,Mongolia,Indonesia,Philippines,Taiwan,WA (GMT+08:00), 9 Russia,Japan,Korea (GMT+09:00), 9.5 Adelaide,Darwin (GMT+09:30), 10 Eastern Standard(Aust),Russia,Gaum,Papua New Guinea (GMT+10:00)
.1.3.6.1.4.1.4526.4.3.1.8.3,WG102::timeDaylightSaving,INTEGER,read-write,,current,true(1):false(2),This field indicates whether the Daylight Saving time is
.1.3.6.1.4.1.4526.4.3.1.8.4,WG102::timeNtpServer,OCTET,read-write,,current,,This field indicates the hostname or IP address for the NTP server.
.1.3.6.1.4.1.4526.4.3.1.9,WG102::ipSettings,,,,,,
.1.3.6.1.4.1.4526.4.3.1.9.1,WG102::ipDhcpClientEnable,INTEGER,read-write,,current,true(1):false(2),This field indicates whether DHCP client is enabled.
.1.3.6.1.4.1.4526.4.3.1.9.2,WG102::ipIPAddress,IpAddress,read-write,,current,,This field indicates the IP address of the AP. 
.1.3.6.1.4.1.4526.4.3.1.9.3,WG102::ipNetmask,IpAddress,read-write,,current,,This field indicates the netmask addressof the AP.
.1.3.6.1.4.1.4526.4.3.1.9.4,WG102::ipGateway,IpAddress,read-write,,current,,This field indicates the default gateway address of the AP.
.1.3.6.1.4.1.4526.4.3.1.9.5,WG102::ipDnsServer,IpAddress,read-write,,current,,This field indicates the IP address of the DNS
.1.3.6.1.4.1.4526.4.3.2,WG102::wlanSettings,,,,,,
.1.3.6.1.4.1.4526.4.3.2.1,WG102::wlanSettingTable,,not-accessible,,current,,wlanSettingsallow for multiple instances on an agent.
.1.3.6.1.4.1.4526.4.3.2.1.1,WG102::wlanSettingEntry,,not-accessible,radioIndex,current,,An entry in the wlanSettingTable. It is possible for there
.1.3.6.1.4.1.4526.4.3.2.1.1.1,WG102::radioIndex,INTEGER,read-only,,current,dot11a(0):dot11bg(1),This attribute shall indicate the radio's band.
.1.3.6.1.4.1.4526.4.3.2.1.1.2,WG102::radioEnable,INTEGER,read-write,,current,true(1):false(2),This attribute shall indicate whether the radio is enabled.
.1.3.6.1.4.1.4526.4.3.2.1.1.5,WG102::wirelessMode,INTEGER,read-write,,current,auto(0):dot11a(1):dot11b(2):dot11g(3),This attribute shall indicate the desired wireless
.1.3.6.1.4.1.4526.4.3.2.1.1.6,WG102::channel,INTEGER,read-write,,current,,This attribute shall indicate the channel number to be
.1.3.6.1.4.1.4526.4.3.2.1.1.7,WG102::txRate,INTEGER,read-write,,current,best(0):rate1Mbps(1):rate2Mbps(2):rate5dot5Mbps(3):rate6Mbps(4):rate9Mbps(5):rate11Mbps(6):rate12Mbps(7):rate18Mbps(8):rate24Mbps(9):rate36Mbps(10):rate48Mbps(11):rate54Mbps(12),This attribute shall indicate the transmite rate. When
.1.3.6.1.4.1.4526.4.3.2.1.1.8,WG102::txPower,INTEGER,read-write,,current,full(0):half(1):quarter(2):eighth(3):min(4),This attribute shall indicate the transmitting power.
.1.3.6.1.4.1.4526.4.3.2.1.1.9,WG102::beaconInterval,INTEGER,read-write,,current,,This attribute shall indicate the beacon interval.
.1.3.6.1.4.1.4526.4.3.2.1.1.10,WG102::dtimInterval,INTEGER,read-write,,current,,This attribute shall indicate the DTIM period.
.1.3.6.1.4.1.4526.4.3.2.1.1.11,WG102::rtsThreshold,INTEGER,read-write,,current,,This attribute shall indicate the RTS threshold.
.1.3.6.1.4.1.4526.4.3.2.1.1.12,WG102::fragmentationThreshold,INTEGER,read-write,,current,,This attribute shall indicate the fragmentation threshold.
.1.3.6.1.4.1.4526.4.3.2.1.1.13,WG102::dot11bPreamble,INTEGER,read-write,,current,long(0):auto(1),This attribute shall indicate the preamble setting.
.1.3.6.1.4.1.4526.4.3.2.1.1.14,WG102::superMode,INTEGER,read-write,,current,true(1):false(2),This attribute shall indicate whether super mode (super-A
.1.3.6.1.4.1.4526.4.3.2.1.1.15,WG102::wmm,INTEGER,read-write,,current,true(1):false(2),This attribute shall indicate whether wmm is enabled.
.1.3.6.1.4.1.4526.4.3.2.1.1.16,WG102::wmmNoAck,INTEGER,read-write,,current,true(1):false(2),This attribute shall indicate whether wmm with no ack is enabled.
.1.3.6.1.4.1.4526.4.3.2.1.1.17,WG102::acEnabled,INTEGER,read-write,,current,true(1):false(2),This field indicates whether enable AutoCell.
.1.3.6.1.4.1.4526.4.3.2.1.1.18,WG102::acEnhancedRFSecurity,INTEGER,read-write,,current,disable(0):enable(3),This field indicates whether enable Enhanced RF Security.
.1.3.6.1.4.1.4526.4.3.2.1.1.19,WG102::acRogueDevDetection,INTEGER,read-write,,current,true(1):false(2),This field indicates whether enable Rogue Device Detection.
.1.3.6.1.4.1.4526.4.3.2.1.1.20,WG102::accessControlMode,INTEGER,read-write,,current,disabled(0):local(2):server(3),The field indicates whether the access control list is
.1.3.6.1.4.1.4526.4.3.2.2,WG102::wlanSecurityTable,,not-accessible,,current,,Security attributes in tablular form to allow for multiple
.1.3.6.1.4.1.4526.4.3.2.2.1,WG102::wlanSecurityEntry,,not-accessible,radioIndex:securityProfileNo,current,,An entry in the securityTable. It is possible for there to
.1.3.6.1.4.1.4526.4.3.2.2.1.1,WG102::securityProfileNo,INTEGER,read-only,,current,,The field indicates the security profile NO.
.1.3.6.1.4.1.4526.4.3.2.2.1.2,WG102::securityProfileEnabled,INTEGER,read-write,,current,true(1):false(2),This attribute shall indicate whether the security profile is enabled.
.1.3.6.1.4.1.4526.4.3.2.2.1.3,WG102::securityProfileName,OCTET,read-write,,current,,This attribute shall indicate SSID.
.1.3.6.1.4.1.4526.4.3.2.2.1.4,WG102::ssid,OCTET,read-write,,current,,This attribute shall indicate SSID.
.1.3.6.1.4.1.4526.4.3.2.2.1.5,WG102::ssidBroadcastEnable,INTEGER,read-write,,current,true(1):false(2),This attribute shall indicate whether wireless network
.1.3.6.1.4.1.4526.4.3.2.2.1.6,WG102::authentication,INTEGER,read-write,,current,openSystem(0):sharedKey(1):legacy8021x(2):wpaPSK(3):wpaRadius(4):wpa2-psk(5):wpawpa2-psk(6):wpa2-802dot1x(7):wpawpa2-802dot1x(8),The field indicates how to authenticate the station.
.1.3.6.1.4.1.4526.4.3.2.2.1.7,WG102::encryption,INTEGER,read-write,,current,none(0):wep64(1):wep128(2):wep152(3):tkip(4):aes-tkip(5):aes(6),The field indicates how to encryption the data and the type of WEP key.
.1.3.6.1.4.1.4526.4.3.2.2.1.8,WG102::wepKey1,OCTET,read-write,,current,,The field shall indicate the WEP key.
.1.3.6.1.4.1.4526.4.3.2.2.1.9,WG102::wepKey2,OCTET,read-write,,current,,The field shall indicate the WEP key.
.1.3.6.1.4.1.4526.4.3.2.2.1.10,WG102::wepKey3,OCTET,read-write,,current,,The field shall indicate the WEP key.
.1.3.6.1.4.1.4526.4.3.2.2.1.11,WG102::wepKey4,OCTET,read-write,,current,,The field shall indicate the WEP key.
.1.3.6.1.4.1.4526.4.3.2.2.1.12,WG102::wepKeyDefault,INTEGER,read-write,,current,,The field shall indicate the WEP key number to encrypt TX
.1.3.6.1.4.1.4526.4.3.2.2.1.13,WG102::wpaPSK,OCTET,read-write,,current,,This attribute shall indicate WPA Pre-Shared Key.
.1.3.6.1.4.1.4526.4.3.2.2.1.14,WG102::wlanSeparatorEnable,INTEGER,read-write,,current,true(1):false(2),This attribute shall indicate whether block the
.1.3.6.1.4.1.4526.4.3.2.2.1.15,WG102::wlanMaxUser,INTEGER,read-write,,current,,This attribute shall indicates the max wireless clients that allowed to 
.1.3.6.1.4.1.4526.4.3.2.3,WG102::wlanAccessControlLocalTable,,not-accessible,,current,,ACL attributes in tablular form to allow for multiple
.1.3.6.1.4.1.4526.4.3.2.3.1,WG102::wlanAccessControlLocalEntry,,not-accessible,radioIndex:aclIndex,current,,An entry in the wlanAccessControlListTable. It is possible
.1.3.6.1.4.1.4526.4.3.2.3.1.1,WG102::aclIndex,INTEGER,not-accessible,,current,,This field should indicate an index to the access control
.1.3.6.1.4.1.4526.4.3.2.3.1.2,WG102::aclMAC,OCTET,read-write,,current,,This field should indicate an MAC address entry in the
.1.3.6.1.4.1.4526.4.3.2.4,WG102::wlanWdsTable,,not-accessible,,current,,WDS attributes in tablular form to allow for multiple
.1.3.6.1.4.1.4526.4.3.2.4.1,WG102::wlanWdsEntry,,not-accessible,radioIndex,current,,An entry in the wlanWdsTable. It is possible for there to
.1.3.6.1.4.1.4526.4.3.2.4.1.1,WG102::operationMode,INTEGER,read-write,,current,ap(0):ptp(2):ptpAP(3):pxp(4):pxpAP(5):repeater(6),This attribute shall indicate the operation mode.
.1.3.6.1.4.1.4526.4.3.2.4.1.2,WG102::localMacAddress,OCTET,read-only,,current,,This attribute shall indicate the local MAC Address.
.1.3.6.1.4.1.4526.4.3.2.4.1.3,WG102::ptpRemoteMacAddress,OCTET,read-write,,current,,This attribute shall indicate the stationID.
.1.3.6.1.4.1.4526.4.3.2.4.1.4,WG102::pxpRemoteMacAddress1,OCTET,read-write,,current,,This attribute shall indicate the stationID.
.1.3.6.1.4.1.4526.4.3.2.4.1.5,WG102::pxpRemoteMacAddress2,OCTET,read-write,,current,,This attribute shall indicate the stationID.
.1.3.6.1.4.1.4526.4.3.2.4.1.6,WG102::pxpRemoteMacAddress3,OCTET,read-write,,current,,This attribute shall indicate the stationID.
.1.3.6.1.4.1.4526.4.3.2.4.1.7,WG102::pxpRemoteMacAddress4,OCTET,read-write,,current,,This attribute shall indicate the stationID.
.1.3.6.1.4.1.4526.4.3.2.4.1.8,WG102::repeaterParentMacAddress,OCTET,read-write,,current,,This attribute shall indicate the stationID.
.1.3.6.1.4.1.4526.4.3.2.4.1.9,WG102::repeaterChildMacAddress,OCTET,read-write,,current,,This attribute shall indicate the stationID.
.1.3.6.1.4.1.4526.4.3.2.5,WG102::wlanClientsTable,,not-accessible,,current,,wireless clients attributes in tablular form to allow for
.1.3.6.1.4.1.4526.4.3.2.5.1,WG102::wlanClientsEntry,,not-accessible,radioIndex:clientIndex,current,,An entry in the wlanClientsTable. It is possible for there
.1.3.6.1.4.1.4526.4.3.2.5.1.1,WG102::clientIndex,INTEGER,read-only,,current,,This attribute shall indicate sequence number (ID) of the
.1.3.6.1.4.1.4526.4.3.2.5.1.2,WG102::clientMacAddress,OCTET,read-only,,current,,This attribute shall indicate MAC address of the
.1.3.6.1.4.1.4526.4.3.2.5.1.3,WG102::clientIP,IpAddress,read-only,,current,,This attribute shall indicate the IP address of the
.1.3.6.1.4.1.4526.4.3.2.5.1.4,WG102::clientSSID,OCTET,read-only,,current,,This attribute shall indicate the SSID that the
.1.3.6.1.4.1.4526.4.3.2.5.1.5,WG102::clientStatus,INTEGER,read-only,,current,blocked(0):authenticating(1):authenticated(2):associating(3):associated(4),This attribute shall indicate the status of the associated
.1.3.6.1.4.1.4526.4.3.2.6,WG102::wlanUnknownApTable,,not-accessible,,current,,wireless Unknown AP attributes in tablular form to allow for
.1.3.6.1.4.1.4526.4.3.2.6.1,WG102::wlanUnknownApEntry,,not-accessible,radioIndex:unknowApIndex,current,,An entry in the wlanUnknownApTable. It is possible for there
.1.3.6.1.4.1.4526.4.3.2.6.1.1,WG102::unknowApIndex,INTEGER,read-only,,current,,This attribute shall indicate sequence number (ID) of the
.1.3.6.1.4.1.4526.4.3.2.6.1.2,WG102::unknowApAuthorize,INTEGER,read-write,,current,true(1):false(2),This attribute is used to authorize the AP to the authorized AP List.
.1.3.6.1.4.1.4526.4.3.2.6.1.3,WG102::unknowApSSID,OCTET,read-only,,current,,This attribute shall indicate the SSID of the AP.
.1.3.6.1.4.1.4526.4.3.2.6.1.4,WG102::unknowApMacAddress,OCTET,read-only,,current,,This attribute shall indicate MAC address of the AP.
.1.3.6.1.4.1.4526.4.3.2.6.1.5,WG102::unknowApChannel,OCTET,read-only,,current,,This attribute shall indicate the channel number of the AP.
.1.3.6.1.4.1.4526.4.3.2.6.1.6,WG102::unknowApAutoCellEnabled,OCTET,read-only,,current,,This attribute shall indicate whether the AutoCell is enabled on the AP or not.
.1.3.6.1.4.1.4526.4.3.2.7,WG102::wlanAuthorizedApTable,,not-accessible,,current,,wireless Authorized AP attributes in tablular form to allow for
.1.3.6.1.4.1.4526.4.3.2.7.1,WG102::wlanAuthorizedApEntry,,not-accessible,radioIndex:unknowApIndex,current,,An entry in the wlanAuthorizedApTable. It is possible for there
.1.3.6.1.4.1.4526.4.3.2.7.1.1,WG102::authorizedApIndex,INTEGER,read-only,,current,,This attribute shall indicate sequence number (ID) of the
.1.3.6.1.4.1.4526.4.3.2.7.1.2,WG102::authorizedApDelete,INTEGER,read-write,,current,true(1):false(2),This attribute is used to delete the AP from authorized AP List.
.1.3.6.1.4.1.4526.4.3.2.7.1.3,WG102::authorizedApSSID,OCTET,read-only,,current,,This attribute shall indicate the SSID of the AP.
.1.3.6.1.4.1.4526.4.3.2.7.1.4,WG102::authorizedApMacAddress,OCTET,read-only,,current,,This attribute shall indicate MAC address of the AP.
.1.3.6.1.4.1.4526.4.3.2.7.1.5,WG102::authorizedApChannel,OCTET,read-only,,current,,This attribute shall indicate the channel number of the AP.
.1.3.6.1.4.1.4526.4.3.2.7.1.6,WG102::authorizedApAutoCellEnabled,OCTET,read-only,,current,,This attribute shall indicate whether the AutoCell is enabled on the AP or not.
.1.3.6.1.4.1.4526.4.3.2.8,WG102::wlanUnknownStationTable,,not-accessible,,current,,wireless Unknown Station attributes in tablular form to allow for
.1.3.6.1.4.1.4526.4.3.2.8.1,WG102::wlanUnknownStationEntry,,not-accessible,radioIndex:unknowStationIndex,current,,An entry in the wlanUnknownStationTable. It is possible for there
.1.3.6.1.4.1.4526.4.3.2.8.1.1,WG102::unknowStationIndex,INTEGER,read-only,,current,,This attribute shall indicate sequence number (ID) of the
.1.3.6.1.4.1.4526.4.3.2.8.1.2,WG102::unknowStationAuthorize,INTEGER,read-write,,current,true(1):false(2),This attribute is used to authorize the Station to the authorized Station List.
.1.3.6.1.4.1.4526.4.3.2.8.1.3,WG102::unknowStationMacAddress,OCTET,read-only,,current,,This attribute shall indicate MAC address of the Station.
.1.3.6.1.4.1.4526.4.3.2.8.1.4,WG102::unknowStationChannel,OCTET,read-only,,current,,This attribute shall indicate the channel number of the Station.
.1.3.6.1.4.1.4526.4.3.2.8.1.5,WG102::unknowStationAutoCellEnabled,OCTET,read-only,,current,,This attribute shall indicate whether the AutoCell is enabled on the Station or not.
.1.3.6.1.4.1.4526.4.3.2.9,WG102::wlanAuthorizedStationTable,,not-accessible,,current,,wireless Authorized Station attributes in tablular form to allow for
.1.3.6.1.4.1.4526.4.3.2.9.1,WG102::wlanAuthorizedStationEntry,,not-accessible,radioIndex:unknowStationIndex,current,,An entry in the wlanAuthorizedStationTable. It is possible for there
.1.3.6.1.4.1.4526.4.3.2.9.1.1,WG102::authorizedStationIndex,INTEGER,read-only,,current,,This attribute shall indicate sequence number (ID) of the
.1.3.6.1.4.1.4526.4.3.2.9.1.2,WG102::authorizedStationDelete,INTEGER,read-write,,current,true(1):false(2),This attribute is used to delete the Station from authorized Station List.
.1.3.6.1.4.1.4526.4.3.2.9.1.3,WG102::authorizedStationMacAddress,OCTET,read-only,,current,,This attribute shall indicate MAC address of the Station.
.1.3.6.1.4.1.4526.4.3.2.9.1.4,WG102::authorizedStationChannel,OCTET,read-only,,current,,This attribute shall indicate the channel number of the Station.
.1.3.6.1.4.1.4526.4.3.2.9.1.5,WG102::authorizedStationAutoCellEnabled,OCTET,read-only,,current,,This attribute shall indicate whether the AutoCell is enabled on the Station or not.
.1.3.6.1.4.1.4526.4.3.3,WG102::vlanSettings,,,,,,
.1.3.6.1.4.1.4526.4.3.3.1,WG102::vlanEnable,INTEGER,read-write,,current,true(1):false(2),This attribute shall indicate whether vlan(802.1Q) is
.1.3.6.1.4.1.4526.4.3.3.2,WG102::managementVlanId,INTEGER,read-write,,current,,This attribute shall indicate the management VLAN ID.
.1.3.6.1.4.1.4526.4.3.3.3,WG102::securityProfileVlanTable,,not-accessible,,current,,Description.
.1.3.6.1.4.1.4526.4.3.3.3.1,WG102::securityProfileVlanEntry,,not-accessible,wlanSecurityProfileNo,current,,Description.
.1.3.6.1.4.1.4526.4.3.3.3.1.1,WG102::profileNo,INTEGER,read-only,,current,,the field indicates the security profile NO.
.1.3.6.1.4.1.4526.4.3.3.3.1.2,WG102::profileVlan,INTEGER,read-write,,current,,the field indicates the security profile's VLAN.
.1.3.6.1.4.1.4526.4.3.4,WG102::sysStatistics,,,,,,
.1.3.6.1.4.1.4526.4.3.4.1,WG102::ethernetStat,,,,,,
.1.3.6.1.4.1.4526.4.3.4.1.1,WG102::ethInPackets,Unsigned32,read-only,,current,,the field indicates the sum of received packets.
.1.3.6.1.4.1.4526.4.3.4.1.2,WG102::ethOutPackets,Unsigned32,read-only,,current,,the field indicates the sum of transmitted packets.
.1.3.6.1.4.1.4526.4.3.4.1.3,WG102::ethInBytes,Unsigned32,read-only,,current,,the field indicates the sum of received bytes.
.1.3.6.1.4.1.4526.4.3.4.1.4,WG102::ethOutBytes,Unsigned32,read-only,,current,,the field indicates the sum of transmitted bytes.
.1.3.6.1.4.1.4526.4.3.4.2,WG102::wirelessStatTable,,not-accessible,,current,,Description.
.1.3.6.1.4.1.4526.4.3.4.2.1,WG102::wirelessStatEntry,,not-accessible,radioIndex,current,,Description.
.1.3.6.1.4.1.4526.4.3.4.2.1.1,WG102::wlanSecurityProfileNo,INTEGER,read-only,,current,,the field indicates the security profile NO.
.1.3.6.1.4.1.4526.4.3.4.2.1.2,WG102::wlanInPacketsUnicast,Unsigned32,read-only,,current,,the field indicates the sum of received unicast packets.
.1.3.6.1.4.1.4526.4.3.4.2.1.3,WG102::wlanOutPacketsUnicast,Unsigned32,read-only,,current,,the field indicates the sum of transmitted unicast packets.
.1.3.6.1.4.1.4526.4.3.4.2.1.4,WG102::wlanInPacketsBroadcast,Unsigned32,read-only,,current,,the field indicates the sum of received broadcast packets.
.1.3.6.1.4.1.4526.4.3.4.2.1.5,WG102::wlanOutPacketsBroadcast,Unsigned32,read-only,,current,,the field indicates the sum of transmitted broadcast packets.
.1.3.6.1.4.1.4526.4.3.4.2.1.6,WG102::wlanInPacketsMulticast,Unsigned32,read-only,,current,,the field indicates the sum of received multicast packets.
.1.3.6.1.4.1.4526.4.3.4.2.1.7,WG102::wlanOutPacketsMulticast,Unsigned32,read-only,,current,,the field indicates the sum of transmitted multicast packets.
.1.3.6.1.4.1.4526.4.3.4.2.1.8,WG102::wlanInPacketsTotal,Unsigned32,read-only,,current,,the field indicates the sum of received packets.
.1.3.6.1.4.1.4526.4.3.4.2.1.9,WG102::wlanOutPacketsTotal,Unsigned32,read-only,,current,,the field indicates the sum of transmitted packets.
.1.3.6.1.4.1.4526.4.3.4.2.1.10,WG102::wlanInBytesTotal,Unsigned32,read-only,,current,,the field indicates the sum of received bytes.
.1.3.6.1.4.1.4526.4.3.4.2.1.11,WG102::wlanOutBytesTotal,Unsigned32,read-only,,current,,the field indicates the sum of transmitted bytes.
.1.3.6.1.4.1.4526.4.3.4.3,WG102::ethWrongPackets,Unsigned32,read-only,,current,,the field indicates the sum of wrong Ethernet packets.
.1.3.6.1.4.1.4526.4.3.4.4,WG102::wrongWLANSTAPackets,Unsigned32,read-only,,current,,the field indicates the sum of wrong wireless station packets.
.1.3.6.1.4.1.4526.4.3.4.5,WG102::wlanStationCount,Unsigned32,read-only,,current,,the field indicates the number of stations.
.1.3.6.1.4.1.4526.4.3.4.6,WG102::wirelessLinkStatTable,,not-accessible,,current,,The table is for wireless client¡¯s association request, successful associated, granted access and aggregative clients disconnection with date & time section and read flag information.
.1.3.6.1.4.1.4526.4.3.4.6.1,WG102::wirelessLinkStatEntry,,not-accessible,wirelessLinkStatIndex,current,,Providing entries for wirelessLinkStatTable
.1.3.6.1.4.1.4526.4.3.4.6.1.1,WG102::wirelessLinkStatIndex,INTEGER,read-only,,current,,This field indicates the index of this statistic records.
.1.3.6.1.4.1.4526.4.3.4.6.1.2,WG102::wirelessLinkStatDate,OCTET,read-only,,current,,This field indicates the date of this statistic record in the format:
.1.3.6.1.4.1.4526.4.3.4.6.1.3,WG102::wirelessLinkStatTime,INTEGER,read-only,,current,,This field indicates the time slice of this statistic record.
.1.3.6.1.4.1.4526.4.3.4.6.1.4,WG102::wirelessLinkStatRequest,Unsigned32,read-only,,current,,This field indicates the statistic of Association Request to the AP.
.1.3.6.1.4.1.4526.4.3.4.6.1.5,WG102::wirelessLinkStatResponse,Unsigned32,read-only,,current,,This field indicates the statistic of Association Response sent by the AP.
.1.3.6.1.4.1.4526.4.3.4.6.1.6,WG102::wirelessLinkStatGrant,Unsigned32,read-only,,current,,This field indicates the statistic of Successful Association with the AP.
.1.3.6.1.4.1.4526.4.3.4.6.1.7,WG102::wirelessLinkStatDisconnect,Unsigned32,read-only,,current,,This field indicates the statistic how many AP detects client¡¯s disconnection due to timeout.
.1.3.6.1.4.1.4526.4.3.4.6.1.8,WG102::wirelessLinkStatDisconnectAll,Unsigned32,read-only,,current,,This field indicates the statistic that the AP detects all wireless clients (>1) disconnecting within 1 second
.1.3.6.1.4.1.4526.4.3.4.6.1.9,WG102::wirelessLinkStatFlag,INTEGER,read-write,,current,true(1):false(2),This field indicates if the network management system has already read this record.
.1.3.6.1.4.1.4526.4.3.4.8,WG102::wlanAuthenticatedStationCount,Unsigned32,read-only,,current,,The field indicates the number of stations that 802.1x authenticated.
.1.3.6.1.4.1.4526.4.3.4.9,WG102::sysTotalMemory,Unsigned32,read-only,,current,,The field indicates the total memory size of the system.
.1.3.6.1.4.1.4526.4.3.4.10,WG102::sysFreeMemory,Unsigned32,read-only,,current,,The field indicates the current free memory size of the system.
.1.3.6.1.4.1.4526.4.3.4.11,WG102::sysRuntime,TimeTicks,read-only,,current,,The field indicates the time (in hundredths of a second) since the  system was last re-initialized.
.1.3.6.1.4.1.4526.4.3.5,WG102::radiusSettings,,,,,,
.1.3.6.1.4.1.4526.4.3.5.1,WG102::radiusAuthPrimaryServer,,,,,,
.1.3.6.1.4.1.4526.4.3.5.1.1,WG102::radiusAuthPrimaryServerIP,IpAddress,read-write,,current,,This field shall indicate the primary authentication
.1.3.6.1.4.1.4526.4.3.5.1.2,WG102::radiusAuthPrimaryServerPort,INTEGER,read-write,,current,,This field shall indicate the primary authentication
.1.3.6.1.4.1.4526.4.3.5.1.3,WG102::radiusAuthPrimaryServerSecret,OCTET,read-write,,current,,This field shall indicate the primary authentication
.1.3.6.1.4.1.4526.4.3.5.2,WG102::radiusAuthSecondaryServer,,,,,,
.1.3.6.1.4.1.4526.4.3.5.2.1,WG102::radiusAuthSecondaryServerIP,IpAddress,read-write,,current,,This field shall indicate the secondary authentication
.1.3.6.1.4.1.4526.4.3.5.2.2,WG102::radiusAuthSecondaryServerPort,INTEGER,read-write,,current,,This field shall indicate the secondary authentication
.1.3.6.1.4.1.4526.4.3.5.2.3,WG102::radiusAuthSecondaryServerSecret,OCTET,read-write,,current,,This field shall indicate the secondary authentication
.1.3.6.1.4.1.4526.4.3.5.3,WG102::authenticationSettings,,,,,,
.1.3.6.1.4.1.4526.4.3.5.3.1,WG102::reauthTime,INTEGER,read-write,,current,,This attribute shall indicate 802.1x reauth time.
.1.3.6.1.4.1.4526.4.3.5.3.2,WG102::wpaGroupKeyUpdateCondition,INTEGER,read-write,,current,never(0):seconds(1):disconnect(2):secondsAndDisconnect(3),This attribute shall indicate WPA group key update
.1.3.6.1.4.1.4526.4.3.5.3.3,WG102::wpaGroupKeyUpdateIntervalSecond,INTEGER,read-write,,current,,This fields indicates the wpa keyupdate sec interval.
.1.3.6.1.4.1.4526.4.3.5.4,WG102::radiusAccountPrimaryServer,,,,,,
.1.3.6.1.4.1.4526.4.3.5.4.1,WG102::radiusAccountPrimaryServerIP,IpAddress,read-write,,current,,This field shall indicate the primary account RADIUS
.1.3.6.1.4.1.4526.4.3.5.4.2,WG102::radiusAccountPrimaryServerPort,INTEGER,read-write,,current,,This field shall indicate the primary account RADIUS
.1.3.6.1.4.1.4526.4.3.5.4.3,WG102::radiusAccountPrimaryServerSecret,OCTET,read-write,,current,,This field shall indicate the primary account RADIUS
.1.3.6.1.4.1.4526.4.3.5.5,WG102::radiusAccountSecondaryServer,,,,,,
.1.3.6.1.4.1.4526.4.3.5.5.1,WG102::radiusAccountSecondaryServerIP,IpAddress,read-write,,current,,This field shall indicate the secondary account RADIUS
.1.3.6.1.4.1.4526.4.3.5.5.2,WG102::radiusAccountSecondaryServerPort,INTEGER,read-write,,current,,This field shall indicate the secondary account RADIUS
.1.3.6.1.4.1.4526.4.3.5.5.3,WG102::radiusAccountSecondaryServerSecret,OCTET,read-write,,current,,This field shall indicate the secondary account RADIUS
.1.3.6.1.4.1.4526.4.3.6,WG102::hotspotSettings,,,,,,
.1.3.6.1.4.1.4526.4.3.6.1,WG102::httpRedirectEnable,INTEGER,read-write,,current,true(1):false(2),This attribute shall indicate whether the HTTP redirect is
.1.3.6.1.4.1.4526.4.3.6.2,WG102::httpRedirectUrl,OCTET,read-write,,current,,This attribute shall indicate http redirect URL.
.1.3.6.1.4.1.4526.4.3.7,WG102::syslogSettings,,,,,,
.1.3.6.1.4.1.4526.4.3.7.1,WG102::syslogEnable,INTEGER,read-write,,current,true(1):false(2),This attribute shall indicate whether the syslog is enabled.
.1.3.6.1.4.1.4526.4.3.7.2,WG102::syslogServerIP,IpAddress,read-write,,current,,This attributes shall indicates the IP address of the
.1.3.6.1.4.1.4526.4.3.7.3,WG102::syslogServerPort,INTEGER,read-write,,current,,This attributes shall indicates the Port of the Syslog
.1.3.6.1.4.1.4526.4.3.8,WG102::remoteMgmtSettings,,,,,,
.1.3.6.1.4.1.4526.4.3.8.1,WG102::snmpEnable,INTEGER,read-write,,current,true(1):false(2),This attribute shall indicate whether the SNMP agent is
.1.3.6.1.4.1.4526.4.3.8.2,WG102::snmpManageIP,IpAddress,read-write,,current,,The field indicates the SNMP manage IP address.
.1.3.6.1.4.1.4526.4.3.8.3,WG102::snmpTrapServerIP,IpAddress,read-write,,current,,The field indicates the SNMP trap server IP address.
.1.3.6.1.4.1.4526.4.3.8.4,WG102::snmpReadCommunity,OCTET,read-write,,current,,The field indicates the SNMP read only community name.
.1.3.6.1.4.1.4526.4.3.8.5,WG102::snmpWriteCommunity,OCTET,read-write,,current,,The field indicates the SNMP read write community name.
.1.3.6.1.4.1.4526.4.3.8.6,WG102::snmpTrapPort,INTEGER,read-write,,current,,This field shall indicate the port for trap. Default: 162.
.1.3.6.1.4.1.4526.4.3.8.8,WG102::mgmtWebAccessCtrl,INTEGER,read-write,,current,true(1):false(2),This attribute shall allow you to turn the WEB access control on or off.
.1.3.6.1.4.1.4526.4.3.8.9,WG102::mgmtWebIPSubnet1,OCTET,read-write,,current,,The field indicates the IP Subnet: a base IP address and a subnet mask.
.1.3.6.1.4.1.4526.4.3.8.10,WG102::mgmtWebIPSubnet2,OCTET,read-write,,current,,The field indicates the IP Subnet: a base IP address and a subnet mask.
.1.3.6.1.4.1.4526.4.3.8.11,WG102::mgmtWebIPSubnet3,OCTET,read-write,,current,,The field indicates the IP Subnet: a base IP address and a subnet mask.
.1.3.6.1.4.1.4526.4.3.8.12,WG102::mgmtWebIPSubnet4,OCTET,read-write,,current,,The field indicates the IP Subnet: a base IP address and a subnet mask.
.1.3.6.1.4.1.4526.4.3.8.13,WG102::mgmtWebIPSubnet5,OCTET,read-write,,current,,The field indicates the IP Subnet: a base IP address and a subnet mask.
.1.3.6.1.4.1.4526.4.3.8.14,WG102::mgmtWebIPSubnet6,OCTET,read-write,,current,,The field indicates the IP Subnet: a base IP address and a subnet mask.
.1.3.6.1.4.1.4526.4.3.8.15,WG102::mgmtWebIPSubnet7,OCTET,read-write,,current,,The field indicates the IP Subnet: a base IP address and a subnet mask.
.1.3.6.1.4.1.4526.4.3.8.16,WG102::mgmtWebIPSubnet8,OCTET,read-write,,current,,The field indicates the IP Subnet: a base IP address and a subnet mask.
.1.3.6.1.4.1.4526.4.3.9,WG102::auxCommand,,,,,,
.1.3.6.1.4.1.4526.4.3.9.1,WG102::resetAP,INTEGER,read-write,,current,true(1):false(2),This a command field for conntrol AP action. Write any
.1.3.6.1.4.1.4526.4.3.9.2,WG102::resetToFactoryDefault,INTEGER,read-write,,current,true(1):false(2),This a command field for conntrol AP action. Write any
.1.3.6.1.4.1.4526.4.4,BROADCOM-REF-MIB::wag302,,,,,,
.1.3.6.1.4.1.4526.4.5,BROADCOM-REF-MIB::wag102,,,,,,
.1.3.6.1.4.1.4526.4.5.1,WAG102::sysSettings,,,,,,
.1.3.6.1.4.1.4526.4.5.1.1,WAG102::sysMacAddress,OCTET,read-only,,current,,This field indicates the system MAC Address.
.1.3.6.1.4.1.4526.4.5.1.2,WAG102::sysVersion,OCTET,read-only,,current,,This field indicates the system firmware version.
.1.3.6.1.4.1.4526.4.5.1.3,WAG102::sysAPName,OCTET,read-write,,current,,This field indicates the name of AP. The name is also the
.1.3.6.1.4.1.4526.4.5.1.4,WAG102::sysAdminName,OCTET,not-accessible,,current,,This field indicates the administrator name, which is used
.1.3.6.1.4.1.4526.4.5.1.5,WAG102::sysAdminPasswd,OCTET,not-accessible,,current,,This field indicates the administrator password, which is
.1.3.6.1.4.1.4526.4.5.1.7,WAG102::sysCountryRegion,INTEGER,read-write,,current,asia(410):australia(36):canada(124):denmark(208):europe(40):finland(246):france(250):germany(276):ireland(372):italy(380):japan(392):mexico(484):netherlands(528):newZealand(554):norway(578):puertoRico(630):southAmerica(340):spain(724):sweden(752):switzerland(756):unitedKingdom(826):unitedStates(840),This field indicates the country/region of the AP.
.1.3.6.1.4.1.4526.4.5.1.8,WAG102::timeSettings,,,,,,
.1.3.6.1.4.1.4526.4.5.1.8.1,WAG102::timeCurrentTime,OCTET,read-only,,current,,This field indicates the current system time in a format:
.1.3.6.1.4.1.4526.4.5.1.8.2,WAG102::timeTimeZone,INTEGER,read-write,,current,gmt00UkGreenWichCasablancaMonrovia(0):gmtwest12EniwetokKwajalein(1):gmtwest11MidwayIslandSamoa(2):gmtwest10Hawaii(3):gmtwest9dot5MarqesasIs(4):gmtwest09Alaska(5):gmtwest8dot5PitciarnIs(6):gmtwest08PacificTimeUsCanada(7):gmtwest07MountainTimeUsArizona(8):gmtwest06CentralTimeUsMexicoCityTequciqalpa(9):gmtwest05EasternTimeUsBogotaLimaQuitoIndianaEast(10):gmtwest04CaracasLaPaz(11):gmtwest3dot5Newfoundland(12):gmtwest03BrasiliaBeunosAiresGeorgetown(13):gmtwest02MidAtlantic(14):gmtwest01AzoresCapeVerdeIs(15):gmteast01Europe(16):gmteast02EgyptFinlandRomaniaTurkeyGreeceIsraelJordan(17):gmteast03IraqSyriaRussia(18):gmteast3dot5Iran(19):gmteast04ArmeniaAzerbaijan(20):gmteast4dot5Afghanistan(21):gmteast05RussiaPakistan(22):gmteast5dot5India(23):gmteast06BangladeshRussia(24):gmteast6dot5Burma(25):gmteast07RussiaThailandCombodiaLaos(26):gmteast08RussiaChinaMongoliaIndonesiaPhilippinesTaiwanWA(27):gmteast09RussiaJapanKorea(28):gmteast9dot5AdelaideDarwin(29):gmteast10EasternStandardAustRussiaGaumPapuaNewGuinea(30),This field indicates the timezone of the system. -12 Eniwetok,Kwajalein (GMT-12:00), -11 Midway I., Samoa (GMT-11:00), -10 Hawaii (GMT-10:00), -9.5 Marqesas Is. (GMT-09:30), -9 Alaska (GMT-09:00), -8.5 Pitciarn Is. (GMT-08:30), -8 Pacific Time ..US and Canada (GMT-08:00), -7 MountainTime(USA),Arizona (GMT-07:00), -6 CentralTime(USA),Mexico City,Tequciqalpa (GMT-06:00), -5 EasternTime(USA),Bogota,Lima,Quito,Indiana East (GMT-05:00), -4 Caracas,La Paz (GMT-04:00), -3.5 Newfoundland (GMT-03:30), -3 Brasilia,Beunos Aires,Georgetown (GMT-03:00), -2 Mid-Atlantic (GMT-02:00), -1 Azores,Cape Verde Is. (GMT-01:00), 1 Europe (GMT+01:00), 2 Egypt,Finland,Romania,Turkey,Greece,Israel,Jordan(GMT+02:00), 3 Iraq, Syria,Russia (GMT+03:00), 3.5 Iran (GMT+03:30), 4 Armenia, Azerbaijan (GMT+04:00), 4.5 Afghanistan (GMT+04:30), 5 Russia,Pakistan (GMT+05:00), 5.5 India (GMT+05:30), 6 Bangladesh,Russia (GMT+06:00), 6.5 Burma (GMT+06:30), 7 Russia,Thailand, Combodia, Laos (GMT+07:00), 8 Russia,China,Mongolia,Indonesia,Philippines,Taiwan,WA (GMT+08:00), 9 Russia,Japan,Korea (GMT+09:00), 9.5 Adelaide,Darwin (GMT+09:30), 10 Eastern Standard(Aust),Russia,Gaum,Papua New Guinea (GMT+10:00)
.1.3.6.1.4.1.4526.4.5.1.8.3,WAG102::timeDaylightSaving,INTEGER,read-write,,current,true(1):false(2),This field indicates whether the Daylight Saving time is
.1.3.6.1.4.1.4526.4.5.1.9,WAG102::ipSettings,,,,,,
.1.3.6.1.4.1.4526.4.5.1.9.1,WAG102::ipDhcpClientEnable,INTEGER,read-write,,current,true(1):false(2),This field indicates whether DHCP client is enabled.
.1.3.6.1.4.1.4526.4.5.1.9.2,WAG102::ipIPAddress,IpAddress,read-write,,current,,This field indicates the IP address of the AP. 
.1.3.6.1.4.1.4526.4.5.1.9.3,WAG102::ipNetmask,IpAddress,read-write,,current,,This field indicates the netmask addressof the AP.
.1.3.6.1.4.1.4526.4.5.1.9.4,WAG102::ipGateway,IpAddress,read-write,,current,,This field indicates the default gateway address of the AP.
.1.3.6.1.4.1.4526.4.5.1.9.5,WAG102::ipDnsServer,IpAddress,read-write,,current,,This field indicates the IP address of the DNS
.1.3.6.1.4.1.4526.4.5.2,WAG102::wlanSettings,,,,,,
.1.3.6.1.4.1.4526.4.5.2.1,WAG102::wlanSettingTable,,not-accessible,,current,,wlanSettingsallow for multiple instances on an agent.
.1.3.6.1.4.1.4526.4.5.2.1.1,WAG102::wlanSettingEntry,,not-accessible,radioIndex,current,,An entry in the wlanSettingTable. It is possible for there
.1.3.6.1.4.1.4526.4.5.2.1.1.1,WAG102::radioIndex,INTEGER,read-only,,current,dot11a(0):dot11bg(1),This attribute shall indicate the radio's band.
.1.3.6.1.4.1.4526.4.5.2.1.1.2,WAG102::radioEnable,INTEGER,read-write,,current,true(1):false(2),This attribute shall indicate whether the radio is enabled.
.1.3.6.1.4.1.4526.4.5.2.1.1.5,WAG102::wirelessMode,INTEGER,read-write,,current,auto(0):dot11a(1):dot11b(2):dot11g(3),This attribute shall indicate the desired wireless
.1.3.6.1.4.1.4526.4.5.2.1.1.6,WAG102::channel,INTEGER,read-write,,current,,This attribute shall indicate the channel number to be
.1.3.6.1.4.1.4526.4.5.2.1.1.7,WAG102::txRate,INTEGER,read-write,,current,best(0):rate1Mbps(1):rate2Mbps(2):rate5dot5Mbps(3):rate6Mbps(4):rate9Mbps(5):rate11Mbps(6):rate12Mbps(7):rate18Mbps(8):rate24Mbps(9):rate36Mbps(10):rate48Mbps(11):rate54Mbps(12),This attribute shall indicate the transmite rate. When
.1.3.6.1.4.1.4526.4.5.2.1.1.8,WAG102::txPower,INTEGER,read-write,,current,full(0):half(1):quarter(2):eighth(3):min(4),This attribute shall indicate the transmitting power.
.1.3.6.1.4.1.4526.4.5.2.1.1.9,WAG102::beaconInterval,INTEGER,read-write,,current,,This attribute shall indicate the beacon interval.
.1.3.6.1.4.1.4526.4.5.2.1.1.10,WAG102::dtimInterval,INTEGER,read-write,,current,,This attribute shall indicate the DTIM period.
.1.3.6.1.4.1.4526.4.5.2.1.1.11,WAG102::rtsThreshold,INTEGER,read-write,,current,,This attribute shall indicate the RTS threshold.
.1.3.6.1.4.1.4526.4.5.2.1.1.12,WAG102::fragmentationThreshold,INTEGER,read-write,,current,,This attribute shall indicate the fragmentation threshold.
.1.3.6.1.4.1.4526.4.5.2.1.1.13,WAG102::dot11bPreamble,INTEGER,read-write,,current,long(0):auto(1),This attribute shall indicate the preamble setting.
.1.3.6.1.4.1.4526.4.5.2.1.1.14,WAG102::superMode,INTEGER,read-write,,current,true(1):false(2),This attribute shall indicate whether super mode (super-A
.1.3.6.1.4.1.4526.4.5.2.1.1.15,WAG102::wmm,INTEGER,read-write,,current,true(1):false(2),This attribute shall indicate whether wmm is enabled.
.1.3.6.1.4.1.4526.4.5.2.1.1.16,WAG102::wmmNoAck,INTEGER,read-write,,current,true(1):false(2),This attribute shall indicate whether wmm with no ack is enabled.
.1.3.6.1.4.1.4526.4.5.2.1.1.20,WAG102::accessControlMode,INTEGER,read-write,,current,disabled(0):local(2):server(3),The field indicates whether the access control list is
.1.3.6.1.4.1.4526.4.5.2.2,WAG102::wlanSecurityTable,,not-accessible,,current,,Security attributes in tablular form to allow for multiple
.1.3.6.1.4.1.4526.4.5.2.2.1,WAG102::wlanSecurityEntry,,not-accessible,radioIndex:securityProfileNo,current,,An entry in the securityTable. It is possible for there to
.1.3.6.1.4.1.4526.4.5.2.2.1.1,WAG102::securityProfileNo,INTEGER,read-only,,current,,The field indicates the security profile NO.
.1.3.6.1.4.1.4526.4.5.2.2.1.2,WAG102::securityProfileEnabled,INTEGER,read-write,,current,true(1):false(2),This attribute shall indicate whether the security profile is enabled.
.1.3.6.1.4.1.4526.4.5.2.2.1.3,WAG102::securityProfileName,OCTET,read-write,,current,,This attribute shall indicate SSID.
.1.3.6.1.4.1.4526.4.5.2.2.1.4,WAG102::ssid,OCTET,read-write,,current,,This attribute shall indicate SSID.
.1.3.6.1.4.1.4526.4.5.2.2.1.5,WAG102::ssidBroadcastEnable,INTEGER,read-write,,current,true(1):false(2),This attribute shall indicate whether wireless network
.1.3.6.1.4.1.4526.4.5.2.2.1.6,WAG102::authentication,INTEGER,read-write,,current,openSystem(0):sharedKey(1):legacy8021x(2):wpaPSK(3):wpaRadius(4):wpa2-psk(5):wpawpa2-psk(6):wpa2-802dot1x(7):wpawpa2-802dot1x(8),The field indicates how to authenticate the station.
.1.3.6.1.4.1.4526.4.5.2.2.1.7,WAG102::encryption,INTEGER,read-write,,current,none(0):wep64(1):wep128(2):wep152(3):tkip(4):aes-tkip(5):aes(6),The field indicates how to encryption the data and the type of WEP key.
.1.3.6.1.4.1.4526.4.5.2.2.1.8,WAG102::wepKey1,OCTET,read-write,,current,,The field shall indicate the WEP key.
.1.3.6.1.4.1.4526.4.5.2.2.1.9,WAG102::wepKey2,OCTET,read-write,,current,,The field shall indicate the WEP key.
.1.3.6.1.4.1.4526.4.5.2.2.1.10,WAG102::wepKey3,OCTET,read-write,,current,,The field shall indicate the WEP key.
.1.3.6.1.4.1.4526.4.5.2.2.1.11,WAG102::wepKey4,OCTET,read-write,,current,,The field shall indicate the WEP key.
.1.3.6.1.4.1.4526.4.5.2.2.1.12,WAG102::wepKeyDefault,INTEGER,read-write,,current,,The field shall indicate the WEP key number to encrypt TX
.1.3.6.1.4.1.4526.4.5.2.2.1.13,WAG102::wpaPSK,OCTET,read-write,,current,,This attribute shall indicate WPA Pre-Shared Key.
.1.3.6.1.4.1.4526.4.5.2.2.1.14,WAG102::wlanSeparatorEnable,INTEGER,read-write,,current,true(1):false(2),This attribute shall indicate whether block the
.1.3.6.1.4.1.4526.4.5.2.3,WAG102::wlanAccessControlLocalTable,,not-accessible,,current,,ACL attributes in tablular form to allow for multiple
.1.3.6.1.4.1.4526.4.5.2.3.1,WAG102::wlanAccessControlLocalEntry,,not-accessible,radioIndex:aclIndex,current,,An entry in the wlanAccessControlListTable. It is possible
.1.3.6.1.4.1.4526.4.5.2.3.1.1,WAG102::aclIndex,INTEGER,not-accessible,,current,,This field should indicate an index to the access control
.1.3.6.1.4.1.4526.4.5.2.3.1.2,WAG102::aclMAC,OCTET,read-write,,current,,This field should indicate an MAC address entry in the
.1.3.6.1.4.1.4526.4.5.2.4,WAG102::wlanWdsTable,,not-accessible,,current,,WDS attributes in tablular form to allow for multiple
.1.3.6.1.4.1.4526.4.5.2.4.1,WAG102::wlanWdsEntry,,not-accessible,radioIndex,current,,An entry in the wlanWdsTable. It is possible for there to
.1.3.6.1.4.1.4526.4.5.2.4.1.1,WAG102::operationMode,INTEGER,read-write,,current,ap(0):ptp(2):ptpAP(3):pxp(4):pxpAP(5):repeater(6),This attribute shall indicate the operation mode.
.1.3.6.1.4.1.4526.4.5.2.4.1.2,WAG102::localMacAddress,OCTET,read-only,,current,,This attribute shall indicate the local MAC Address.
.1.3.6.1.4.1.4526.4.5.2.4.1.3,WAG102::ptpRemoteMacAddress,OCTET,read-write,,current,,This attribute shall indicate the stationID.
.1.3.6.1.4.1.4526.4.5.2.4.1.4,WAG102::pxpRemoteMacAddress1,OCTET,read-write,,current,,This attribute shall indicate the stationID.
.1.3.6.1.4.1.4526.4.5.2.4.1.5,WAG102::pxpRemoteMacAddress2,OCTET,read-write,,current,,This attribute shall indicate the stationID.
.1.3.6.1.4.1.4526.4.5.2.4.1.6,WAG102::pxpRemoteMacAddress3,OCTET,read-write,,current,,This attribute shall indicate the stationID.
.1.3.6.1.4.1.4526.4.5.2.4.1.7,WAG102::pxpRemoteMacAddress4,OCTET,read-write,,current,,This attribute shall indicate the stationID.
.1.3.6.1.4.1.4526.4.5.2.4.1.8,WAG102::repeaterParentMacAddress,OCTET,read-write,,current,,This attribute shall indicate the stationID.
.1.3.6.1.4.1.4526.4.5.2.4.1.9,WAG102::repeaterChildMacAddress,OCTET,read-write,,current,,This attribute shall indicate the stationID.
.1.3.6.1.4.1.4526.4.5.2.5,WAG102::wlanClientsTable,,not-accessible,,current,,wireless clients attributes in tablular form to allow for
.1.3.6.1.4.1.4526.4.5.2.5.1,WAG102::wlanClientsEntry,,not-accessible,radioIndex:clientIndex,current,,An entry in the wlanClientsTable. It is possible for there
.1.3.6.1.4.1.4526.4.5.2.5.1.1,WAG102::clientIndex,INTEGER,read-only,,current,,This attribute shall indicate sequence number (ID) of the
.1.3.6.1.4.1.4526.4.5.2.5.1.2,WAG102::clientMacAddress,OCTET,read-only,,current,,This attribute shall indicate MAC address of the
.1.3.6.1.4.1.4526.4.5.2.5.1.3,WAG102::clientIP,IpAddress,read-only,,current,,This attribute shall indicate the IP address of the
.1.3.6.1.4.1.4526.4.5.2.5.1.4,WAG102::clientSSID,OCTET,read-only,,current,,This attribute shall indicate the SSID that the
.1.3.6.1.4.1.4526.4.5.2.5.1.5,WAG102::clientStatus,INTEGER,read-only,,current,blocked(0):authenticating(1):authenticated(2):associating(3):associated(4),This attribute shall indicate the status of the associated
.1.3.6.1.4.1.4526.4.5.3,WAG102::vlanSettings,,,,,,
.1.3.6.1.4.1.4526.4.5.3.1,WAG102::vlanEnable,INTEGER,read-write,,current,true(1):false(2),This attribute shall indicate whether vlan(802.1Q) is
.1.3.6.1.4.1.4526.4.5.3.2,WAG102::managementVlanId,INTEGER,read-write,,current,,This attribute shall indicate the management VLAN ID.
.1.3.6.1.4.1.4526.4.5.3.3,WAG102::securityProfileVlanTable,,not-accessible,,current,,Description.
.1.3.6.1.4.1.4526.4.5.3.3.1,WAG102::securityProfileVlanEntry,,not-accessible,radioIndex:wlanSecurityProfileNo,current,,Description.
.1.3.6.1.4.1.4526.4.5.3.3.1.1,WAG102::profileNo,INTEGER,read-only,,current,,the field indicates the security profile NO.
.1.3.6.1.4.1.4526.4.5.3.3.1.2,WAG102::profileVlan,INTEGER,read-write,,current,,the field indicates the security profile's VLAN.
.1.3.6.1.4.1.4526.4.5.4,WAG102::sysStatistics,,,,,,
.1.3.6.1.4.1.4526.4.5.4.1,WAG102::ethernetStat,,,,,,
.1.3.6.1.4.1.4526.4.5.4.1.1,WAG102::ethInPackets,Unsigned32,read-only,,current,,the field indicates the sum of received packets.
.1.3.6.1.4.1.4526.4.5.4.1.2,WAG102::ethOutPackets,Unsigned32,read-only,,current,,the field indicates the sum of transmitted packets.
.1.3.6.1.4.1.4526.4.5.4.1.3,WAG102::ethInBytes,Unsigned32,read-only,,current,,the field indicates the sum of received bytes.
.1.3.6.1.4.1.4526.4.5.4.1.4,WAG102::ethOutBytes,Unsigned32,read-only,,current,,the field indicates the sum of transmitted bytes.
.1.3.6.1.4.1.4526.4.5.4.2,WAG102::wirelessStatTable,,not-accessible,,current,,Description.
.1.3.6.1.4.1.4526.4.5.4.2.1,WAG102::wirelessStatEntry,,not-accessible,radioIndex:wlanSecurityProfileNo,current,,Description.
.1.3.6.1.4.1.4526.4.5.4.2.1.1,WAG102::wlanSecurityProfileNo,INTEGER,read-only,,current,,the field indicates the security profile NO.
.1.3.6.1.4.1.4526.4.5.4.2.1.2,WAG102::wlanInPacketsUnicast,Unsigned32,read-only,,current,,the field indicates the sum of received unicast packets.
.1.3.6.1.4.1.4526.4.5.4.2.1.3,WAG102::wlanOutPacketsUnicast,Unsigned32,read-only,,current,,the field indicates the sum of transmitted unicast packets.
.1.3.6.1.4.1.4526.4.5.4.2.1.4,WAG102::wlanInPacketsBroadcast,Unsigned32,read-only,,current,,the field indicates the sum of received broadcast packets.
.1.3.6.1.4.1.4526.4.5.4.2.1.5,WAG102::wlanOutPacketsBroadcast,Unsigned32,read-only,,current,,the field indicates the sum of transmitted broadcast packets.
.1.3.6.1.4.1.4526.4.5.4.2.1.6,WAG102::wlanInPacketsMulticast,Unsigned32,read-only,,current,,the field indicates the sum of received multicast packets.
.1.3.6.1.4.1.4526.4.5.4.2.1.7,WAG102::wlanOutPacketsMulticast,Unsigned32,read-only,,current,,the field indicates the sum of transmitted multicast packets.
.1.3.6.1.4.1.4526.4.5.4.2.1.8,WAG102::wlanInPacketsTotal,Unsigned32,read-only,,current,,the field indicates the sum of received packets.
.1.3.6.1.4.1.4526.4.5.4.2.1.9,WAG102::wlanOutPacketsTotal,Unsigned32,read-only,,current,,the field indicates the sum of transmitted packets.
.1.3.6.1.4.1.4526.4.5.4.2.1.10,WAG102::wlanInBytesTotal,Unsigned32,read-only,,current,,the field indicates the sum of received bytes.
.1.3.6.1.4.1.4526.4.5.4.2.1.11,WAG102::wlanOutBytesTotal,Unsigned32,read-only,,current,,the field indicates the sum of transmitted bytes.
.1.3.6.1.4.1.4526.4.5.5,WAG102::radiusSettings,,,,,,
.1.3.6.1.4.1.4526.4.5.5.1,WAG102::radiusAuthPrimaryServer,,,,,,
.1.3.6.1.4.1.4526.4.5.5.1.1,WAG102::radiusAuthPrimaryServerIP,IpAddress,read-write,,current,,This field shall indicate the primary authentication
.1.3.6.1.4.1.4526.4.5.5.1.2,WAG102::radiusAuthPrimaryServerPort,INTEGER,read-write,,current,,This field shall indicate the primary authentication
.1.3.6.1.4.1.4526.4.5.5.1.3,WAG102::radiusAuthPrimaryServerSecret,OCTET,read-write,,current,,This field shall indicate the primary authentication
.1.3.6.1.4.1.4526.4.5.5.2,WAG102::radiusAuthSecondaryServer,,,,,,
.1.3.6.1.4.1.4526.4.5.5.2.1,WAG102::radiusAuthSecondaryServerIP,IpAddress,read-write,,current,,This field shall indicate the secondary authentication
.1.3.6.1.4.1.4526.4.5.5.2.2,WAG102::radiusAuthSecondaryServerPort,INTEGER,read-write,,current,,This field shall indicate the secondary authentication
.1.3.6.1.4.1.4526.4.5.5.2.3,WAG102::radiusAuthSecondaryServerSecret,OCTET,read-write,,current,,This field shall indicate the secondary authentication
.1.3.6.1.4.1.4526.4.5.5.3,WAG102::authenticationSettings,,,,,,
.1.3.6.1.4.1.4526.4.5.5.3.1,WAG102::reauthTime,INTEGER,read-write,,current,,This attribute shall indicate 802.1x reauth time.
.1.3.6.1.4.1.4526.4.5.5.3.2,WAG102::wpaGroupKeyUpdateCondition,INTEGER,read-write,,current,never(0):seconds(1):disconnect(2):secondsAndDisconnect(3),This attribute shall indicate WPA group key update
.1.3.6.1.4.1.4526.4.5.5.3.3,WAG102::wpaGroupKeyUpdateIntervalSecond,INTEGER,read-write,,current,,This fields indicates the wpa keyupdate sec interval.
.1.3.6.1.4.1.4526.4.5.5.4,WAG102::radiusAccountPrimaryServer,,,,,,
.1.3.6.1.4.1.4526.4.5.5.4.1,WAG102::radiusAccountPrimaryServerIP,IpAddress,read-write,,current,,This field shall indicate the primary account RADIUS
.1.3.6.1.4.1.4526.4.5.5.4.2,WAG102::radiusAccountPrimaryServerPort,INTEGER,read-write,,current,,This field shall indicate the primary account RADIUS
.1.3.6.1.4.1.4526.4.5.5.4.3,WAG102::radiusAccountPrimaryServerSecret,OCTET,read-write,,current,,This field shall indicate the primary account RADIUS
.1.3.6.1.4.1.4526.4.5.5.5,WAG102::radiusAccountSecondaryServer,,,,,,
.1.3.6.1.4.1.4526.4.5.5.5.1,WAG102::radiusAccountSecondaryServerIP,IpAddress,read-write,,current,,This field shall indicate the secondary account RADIUS
.1.3.6.1.4.1.4526.4.5.5.5.2,WAG102::radiusAccountSecondaryServerPort,INTEGER,read-write,,current,,This field shall indicate the secondary account RADIUS
.1.3.6.1.4.1.4526.4.5.5.5.3,WAG102::radiusAccountSecondaryServerSecret,OCTET,read-write,,current,,This field shall indicate the secondary account RADIUS
.1.3.6.1.4.1.4526.4.5.6,WAG102::hotspotSettings,,,,,,
.1.3.6.1.4.1.4526.4.5.6.1,WAG102::httpRedirectEnable,INTEGER,read-write,,current,true(1):false(2),This attribute shall indicate whether the HTTP redirect is
.1.3.6.1.4.1.4526.4.5.6.2,WAG102::httpRedirectUrl,OCTET,read-write,,current,,This attribute shall indicate http redirect URL.
.1.3.6.1.4.1.4526.4.5.7,WAG102::syslogSettings,,,,,,
.1.3.6.1.4.1.4526.4.5.7.1,WAG102::syslogEnable,INTEGER,read-write,,current,true(1):false(2),This attribute shall indicate whether the syslog is enabled.
.1.3.6.1.4.1.4526.4.5.7.2,WAG102::syslogServerIP,IpAddress,read-write,,current,,This attributes shall indicates the IP address of the
.1.3.6.1.4.1.4526.4.5.7.3,WAG102::syslogServerPort,INTEGER,read-write,,current,,This attributes shall indicates the Port of the Syslog
.1.3.6.1.4.1.4526.4.5.8,WAG102::remoteMgmtSettings,,,,,,
.1.3.6.1.4.1.4526.4.5.8.1,WAG102::snmpEnable,INTEGER,read-write,,current,true(1):false(2),This attribute shall indicate whether the SNMP agent is
.1.3.6.1.4.1.4526.4.5.8.2,WAG102::snmpManageIP,IpAddress,read-write,,current,,The field indicates the SNMP manage IP address.
.1.3.6.1.4.1.4526.4.5.8.3,WAG102::snmpTrapServerIP,IpAddress,read-write,,current,,The field indicates the SNMP trap server IP address.
.1.3.6.1.4.1.4526.4.5.8.4,WAG102::snmpReadCommunity,OCTET,read-write,,current,,The field indicates the SNMP read only community name.
.1.3.6.1.4.1.4526.4.5.8.5,WAG102::snmpWriteCommunity,OCTET,read-write,,current,,The field indicates the SNMP read write community name.
.1.3.6.1.4.1.4526.4.5.9,WAG102::auxCommand,,,,,,
.1.3.6.1.4.1.4526.4.5.9.1,WAG102::resetAP,INTEGER,read-write,,current,true(1):false(2),This a command field for conntrol AP action. Write any
.1.3.6.1.4.1.4526.4.5.9.2,WAG102::resetToFactoryDefault,INTEGER,read-write,,current,true(1):false(2),This a command field for conntrol AP action. Write any
.1.3.6.1.4.1.4526.4.6,BROADCOM-REF-MIB::wg302v2,,,,,,
.1.3.6.1.4.1.4526.4.6.1,WG302::lanSettings,,,,,,
.1.3.6.1.4.1.4526.4.6.1.1,WG302::apName,OCTET,read-write,,current,,The field indicates the name of AP.
.1.3.6.1.4.1.4526.4.6.1.2,WG302::sysMacAddress,OCTET,read-only,,current,,This field indicates the system MAC Address.
.1.3.6.1.4.1.4526.4.6.1.3,WG302::sysVersion,OCTET,read-only,,current,,This field indicates the system firmware version.
.1.3.6.1.4.1.4526.4.6.1.4,WG302::sysCountryRegion,INTEGER,read-write,,current,unitedArabEmirates(784):albania(8):armenia(51):argentina(32):austria(40):australia(36):azerbaijan(31):belgium(56):bulgaria(100):bahrain(48):brunei(96):bolivia(68):brazil(76):belarus(112):belize(84):canada(124):switzerland(756):chile(152):china(156):colombia(170):costaRica(188):cyprus(196):czechRepublic(203):germany(276):denmark(208):dominicanRepublic(214):algeria(12):ecuador(218):estonia(233):egypt(818):spain(724):finland(246):france(250):unitedKingdom(826):georgia(268):greece(300):guatemala(320):hongkong(344):honduras(340):croatia(191):hungary(348):indonesia(360):ireland(372):israel(376):india(356):iran(364):iceland(352):italy(380):jordan(400):japan(392):northKorea(408):koreaRepublic(410):kuwait(414):kazakhstan(398):lebanon(422):liechtenstein(438):lithuania(440):luxembourg(442):latvia(428):marocco(504):monaco(492):macedonia(807):macau(446):malta(470):mexico(484):malaysia(458):netherlands(528):norway(578):newZealand(554):oman(512):panama(591):peru(604):philippines(608):pakistan(586):poland(616):puertoRico(630):portugal(620):qatar(634):romania(642):russia(643):saudiArabia(682):sweden(752):singapore(702):slovakRepublic(703):slovenia(705):elSalvador(222):syria(760):thailand(764):tunisia(788):turkey(792):trinidadandTobago(780):taiwan(158):ukraine(804):unitedStates(840):uruguay(858):uzbekistan(860):venezuela(862):vietnam(704):yemen(887):southAfrica(710):zimbabwe(716),This attribute shall indicate the region of operation
.1.3.6.1.4.1.4526.4.6.1.5,WG302::adminName,OCTET,not-accessible,,obsolete,,The field indicates the administrator name.
.1.3.6.1.4.1.4526.4.6.1.6,WG302::adminPasswd,OCTET,not-accessible,,obsolete,,The field indicates the administrator password.
.1.3.6.1.4.1.4526.4.6.1.7,WG302::dhcpStatus,INTEGER,read-write,,current,static(0):dhcpclient(1),This attribute shall indicate whether dhcp client status.
.1.3.6.1.4.1.4526.4.6.1.8,WG302::ipAddr,IpAddress,read-write,,current,,The field indicates the IP address of AP on the wireless
.1.3.6.1.4.1.4526.4.6.1.9,WG302::netmaskAddr,IpAddress,read-write,,current,,The field indicates the netmask of AP on the wireless
.1.3.6.1.4.1.4526.4.6.1.10,WG302::gatewayAddr,IpAddress,read-write,,current,,The field indicates the gateway of AP on the wireless
.1.3.6.1.4.1.4526.4.6.1.11,WG302::pridnsipAddr,IpAddress,read-write,,current,,This attributes shall indicates the IP address of the primary DNS server.
.1.3.6.1.4.1.4526.4.6.1.12,WG302::snddnsipAddr,IpAddress,read-write,,current,,This attributes shall indicates the IP address of the secondary DNS server.
.1.3.6.1.4.1.4526.4.6.1.13,WG302::spantree,INTEGER,read-write,,current,true(1):false(2),This attribute shall indicate spanning tree.
.1.3.6.1.4.1.4526.4.6.1.14,WG302::vlanEnable,INTEGER,read-only,,current,true(1):false(2),This attribute shall indicate whether enable VLAN(802.1Q).
.1.3.6.1.4.1.4526.4.6.1.15,WG302::managementVlanID,INTEGER,read-only,,current,,This attribute shall indicate the Management VLAN ID. 
.1.3.6.1.4.1.4526.4.6.1.16,WG302::untaggedVlanID,INTEGER,read-only,,current,,This attribute shall indicate the Untagged VLAN ID. 
.1.3.6.1.4.1.4526.4.6.2,WG302::wlanSettingTable,,not-accessible,,current,,wlanSettingsallow for multiple instances on an agent.
.1.3.6.1.4.1.4526.4.6.2.1,WG302::wlanSettingEntry,,not-accessible,ifIndex,current,,An entry in the wlanSettingTable. It is possible for
.1.3.6.1.4.1.4526.4.6.2.1.1,WG302::operatemode,INTEGER,read-only,,current,auto(0):dot11b(2):dot11g(3),This attribute shall indicate the desired wireless operating mode.
.1.3.6.1.4.1.4526.4.6.2.1.2,WG302::radioEnable,INTEGER,read-write,,current,true(1):false(2),This attribute shall indicate whether the radio is enabled.
.1.3.6.1.4.1.4526.4.6.2.1.3,WG302::channel,INTEGER,read-write,,current,,This attribute shall indicate the channel number to be
.1.3.6.1.4.1.4526.4.6.2.1.4,WG302::datarate,INTEGER,read-only,,current,best(0):rate1Mbps(1000):rate2Mbps(2000):rate5dot5Mbps(5500):rate6Mbps(6000):rate9Mbps(9000):rate11Mbps(11000):rate12Mbps(12000):rate18Mbps(18000):rate24Mbps(24000):rate36Mbps(36000):rate48Mbps(48000):rate54Mbps(54000),This attribute shall indicate the transmite rate. When
.1.3.6.1.4.1.4526.4.6.2.1.5,WG302::wmmSupport,INTEGER,read-write,,current,true(1):false(2),This field indicates whether support WMM(Wireless Multimedia).
.1.3.6.1.4.1.4526.4.6.2.1.6,WG302::beaconinterval,INTEGER,read-write,,current,,This attribute shall indicate the Beacon Interval.
.1.3.6.1.4.1.4526.4.6.2.1.7,WG302::rtsthreshold,INTEGER,read-write,,current,,This attribute shall indicate the RTS threshold.
.1.3.6.1.4.1.4526.4.6.2.1.8,WG302::fraglength,INTEGER,read-write,,current,,This attribute shall indicate the fragmentation threshold.
.1.3.6.1.4.1.4526.4.6.2.1.9,WG302::dtiminterval,INTEGER,read-write,,current,,This attribute shall indicate the DTIM period.
.1.3.6.1.4.1.4526.4.6.2.1.10,WG302::preambletype,INTEGER,read-only,,current,long(0):auto(1),This attribute shall indicate the preamble setting. This setting is only applicable to 802.11b mode.
.1.3.6.1.4.1.4526.4.6.2.1.11,WG302::txpower,INTEGER,read-write,,current,full(0):half(1):quarter(2):eighth(3):min(4),This attribute shall indicate the tranmiste power.
.1.3.6.1.4.1.4526.4.6.2.1.12,WG302::superG,INTEGER,read-write,,current,true(1):false(2),This attribute shall indicate whether super mode (super-A
.1.3.6.1.4.1.4526.4.6.2.1.13,WG302::accessControlMode,INTEGER,read-only,,current,disabled(0):local(2):server(3),The field indicates whether the access control list is
.1.3.6.1.4.1.4526.4.6.2.1.14,WG302::antenna,INTEGER,read-write,,obsolete,auto(0):primary(1):secondary(2),This attribute shall indicate the tranmistted power.
.1.3.6.1.4.1.4526.4.6.3,WG302::vapSetting,,,,,,
.1.3.6.1.4.1.4526.4.6.3.1,WG302::vapWepAndGlobalSettingTable,,not-accessible,,current,,VAP attributes setting table.
.1.3.6.1.4.1.4526.4.6.3.1.1,WG302::vapWepAndGlobalSettingEntry,,not-accessible,ifIndex,current,, VAP attributes setting table.
.1.3.6.1.4.1.4526.4.6.3.1.1.1,WG302::wepKeyType,INTEGER,read-write,,current,hex64(40):hex128(104):hex152(128),The field shall indicate the type of WEP key.
.1.3.6.1.4.1.4526.4.6.3.1.1.2,WG302::key1,OCTET,read-write,,current,,The field indicates the key value of the first default wep key.
.1.3.6.1.4.1.4526.4.6.3.1.1.3,WG302::key2,OCTET,read-write,,current,,The field indicates the key value of the second default wep key.
.1.3.6.1.4.1.4526.4.6.3.1.1.4,WG302::key3,OCTET,read-write,,current,,The field indicates the key value of the third default wep key.
.1.3.6.1.4.1.4526.4.6.3.1.1.5,WG302::key4,OCTET,read-write,,current,,The field indicates the key value of the fourth default wep key.
.1.3.6.1.4.1.4526.4.6.3.1.1.6,WG302::wepPassPhrase,OCTET,read-write,,current,,This attribute shall indicate WEP pass phrase, used to
.1.3.6.1.4.1.4526.4.6.3.2,WG302::vapSettingTable,,not-accessible,,current,,VAP attributes setting table.
.1.3.6.1.4.1.4526.4.6.3.2.1,WG302::vapSettingEntry,,not-accessible,ifIndex:vapIndex,current,,VAP attributes setting table.
.1.3.6.1.4.1.4526.4.6.3.2.1.1,WG302::vapIndex,INTEGER,read-only,,current,,Description.
.1.3.6.1.4.1.4526.4.6.3.2.1.2,WG302::vapEnable,INTEGER,read-write,,current,true(1):false(2),This attribute shall indicate whether enable VAP.
.1.3.6.1.4.1.4526.4.6.3.2.1.3,WG302::ssid,OCTET,read-write,,current,,This attribute shall indicate SSID.Its length can't be large than 33 .
.1.3.6.1.4.1.4526.4.6.3.2.1.4,WG302::hidenetworkname,INTEGER,read-write,,current,true(1):false(2),This attribute shall indicate whether broadcast wireless network Name (SSID).
.1.3.6.1.4.1.4526.4.6.3.2.1.5,WG302::vlanID,INTEGER,read-write,,current,,This attribute shall indicate the VLAN ID. 
.1.3.6.1.4.1.4526.4.6.3.2.1.6,WG302::securityProfileName,OCTET,read-write,,current,,Description.
.1.3.6.1.4.1.4526.4.6.3.2.1.7,WG302::presharekey,OCTET,read-write,,current,,This attribute shall indicate preshare key.
.1.3.6.1.4.1.4526.4.6.3.2.1.8,WG302::authenticationtype,INTEGER,read-write,,current,open(0):shared(1):legacy802dot1x(2):wpa(4):wpa2(8):wpaORwpa2(12):wpapsk(16):wpa2psk(32):wpapskORwpa2psk(48),The field indicates how to authenticate the station.
.1.3.6.1.4.1.4526.4.6.3.2.1.9,WG302::encryption,INTEGER,read-write,,current,none(0):wep(1):tkip(2):aes(4):tkipORaes(6),The field indicates how to encryption the station.
.1.3.6.1.4.1.4526.4.6.3.2.1.10,WG302::keyno,INTEGER,read-write,,current,,The field indicates the number of default wep key.
.1.3.6.1.4.1.4526.4.6.3.2.1.11,WG302::wlanseparator,INTEGER,read-write,,current,true(1):false(2),This attribute shall indicate whether enable No see.
.1.3.6.1.4.1.4526.4.6.4,WG302::remoteSettings,,,,,,
.1.3.6.1.4.1.4526.4.6.4.1,WG302::sshd,INTEGER,read-write,,current,true(1):false(2),This attribute shall indicate whether the SSH is enabled.
.1.3.6.1.4.1.4526.4.6.4.2,WG302::snmpenable,INTEGER,read-only,,current,true(1):false(2),This attribute shall indicate whether the SNMP agent is
.1.3.6.1.4.1.4526.4.6.4.3,WG302::trapServerIP,IpAddress,read-write,,current,,The field indicates the trap server IP address.
.1.3.6.1.4.1.4526.4.6.4.4,WG302::trapServerCommunity,OCTET,read-write,,current,,The field indicates the trap server community name. ***The value can only be set to 1 to 32 readable string.
.1.3.6.1.4.1.4526.4.6.4.5,WG302::readOnlyCommunity,OCTET,read-write,,current,,The field indicates the read only community name.
.1.3.6.1.4.1.4526.4.6.4.6,WG302::readWriteCommunity,OCTET,read-write,,current,,The field indicates the read write community name.
.1.3.6.1.4.1.4526.4.6.5,WG302::statistic,,,,,,
.1.3.6.1.4.1.4526.4.6.5.1,WG302::wiredethernetstat,,,,,,
.1.3.6.1.4.1.4526.4.6.5.1.1,WG302::lanrecvpacket,Unsigned32,read-only,,current,,the field indicates the sum of received packets.
.1.3.6.1.4.1.4526.4.6.5.1.2,WG302::lantranspacket,Unsigned32,read-only,,current,,the field indicates the sum of transmitted packets.
.1.3.6.1.4.1.4526.4.6.5.1.3,WG302::lanrecvbytes,Unsigned32,read-only,,current,,the field indicates the sum of received bytes.
.1.3.6.1.4.1.4526.4.6.5.1.4,WG302::lantransbytes,Unsigned32,read-only,,current,,the field indicates the sum of transmitted bytes.
.1.3.6.1.4.1.4526.4.6.5.2,WG302::wirelessStatTable,,not-accessible,,current,,Description.
.1.3.6.1.4.1.4526.4.6.5.2.1,WG302::wirelessStatEntry,,not-accessible,ifIndex,current,,Description.
.1.3.6.1.4.1.4526.4.6.5.2.1.1,WG302::wlanrecvunicastpacket,Unsigned32,read-only,,current,,the field indicates the sum of received unicast packets.
.1.3.6.1.4.1.4526.4.6.5.2.1.2,WG302::wlantransunicastpacket,Unsigned32,read-only,,current,,the field indicates the sum of transmitted unicast packets.
.1.3.6.1.4.1.4526.4.6.5.2.1.3,WG302::wlanrecvbroadcastpacket,Unsigned32,read-only,,current,,the field indicates the sum of received broadcast packets.
.1.3.6.1.4.1.4526.4.6.5.2.1.4,WG302::wlantransbroadcastpacket,Unsigned32,read-only,,current,,the field indicates the sum of transmitted broadcast packets.
.1.3.6.1.4.1.4526.4.6.5.2.1.5,WG302::wlanrecvmulticastpacket,Unsigned32,read-only,,current,,the field indicates the sum of received multicast packets.
.1.3.6.1.4.1.4526.4.6.5.2.1.6,WG302::wlantransmulticastpacket,Unsigned32,read-only,,current,,the field indicates the sum of transmitted multicast packets.
.1.3.6.1.4.1.4526.4.6.5.2.1.7,WG302::wlanrecvpacket,Unsigned32,read-only,,current,,the field indicates the sum of received packets.
.1.3.6.1.4.1.4526.4.6.5.2.1.8,WG302::wlantranspacket,Unsigned32,read-only,,current,,the field indicates the sum of transmitted packets.
.1.3.6.1.4.1.4526.4.6.5.2.1.9,WG302::wlanrecvbytes,Unsigned32,read-only,,current,,the field indicates the sum of received bytes.
.1.3.6.1.4.1.4526.4.6.5.2.1.10,WG302::wlantransbytes,Unsigned32,read-only,,current,,the field indicates the sum of transmitted bytes.
.1.3.6.1.4.1.4526.4.6.6,WG302::stationListTable,,not-accessible,,current,,stationList Table show multiple instances on an agent.
.1.3.6.1.4.1.4526.4.6.6.1,WG302::stationListEntry,,not-accessible,ifIndex:macaddress,current,,An entry in the wlanClientsTable. It is possible for there
.1.3.6.1.4.1.4526.4.6.6.1.1,WG302::macaddress,OCTET,read-only,,current,,This attribute shall indicate MAC address of the
.1.3.6.1.4.1.4526.4.6.6.1.2,WG302::clientIpaddr,IpAddress,read-only,,current,,This attribute shall indicate Ip address of the associated stationID.
.1.3.6.1.4.1.4526.4.6.6.1.3,WG302::clientWirelessMode,INTEGER,read-only,,current,dot11a(1):dot11b(2):dot11g(3),This attribute shall indicate the wireless mode of the
.1.3.6.1.4.1.4526.4.6.6.1.4,WG302::stationstatus,INTEGER,read-only,,current,none(0):authenticating(1):authenticated(2):associating(3):associated(4),This attribute shall indicate the status of station.
.1.3.6.1.4.1.4526.4.6.7,WG302::wlanWdsTable,,not-accessible,,current,,WDS attributes in tablular form to allow for multiple
.1.3.6.1.4.1.4526.4.6.7.1,WG302::wlanWdsEntry,,not-accessible,ifIndex,current,,An entry in the wlanWdsTable. It is possible for there to
.1.3.6.1.4.1.4526.4.6.7.1.1,WG302::apmode,INTEGER,read-only,,current,ap(0):ptp(2):ptp-ap(3):pxp(4):pxp-ap(5):repeater(6),This a command field for conntrol AP operation mode. 
.1.3.6.1.4.1.4526.4.6.7.1.2,WG302::ptpremotemacaddress,OCTET,read-write,,current,,This attribute shall indicate the stationID.
.1.3.6.1.4.1.4526.4.6.7.1.3,WG302::pxpremotemacaddress1,OCTET,read-write,,current,,This attribute shall indicate the stationID.
.1.3.6.1.4.1.4526.4.6.7.1.4,WG302::pxpremotemacaddress2,OCTET,read-write,,current,,This attribute shall indicate the stationID.
.1.3.6.1.4.1.4526.4.6.7.1.5,WG302::pxpremotemacaddress3,OCTET,read-write,,current,,This attribute shall indicate the stationID.
.1.3.6.1.4.1.4526.4.6.7.1.6,WG302::pxpremotemacaddress4,OCTET,read-write,,current,,This attribute shall indicate the stationID.
.1.3.6.1.4.1.4526.4.6.7.1.7,WG302::repremotemacaddress1,OCTET,read-write,,current,,This attribute shall indicate the stationID.
.1.3.6.1.4.1.4526.4.6.7.1.8,WG302::repremotemacaddress2,OCTET,read-write,,current,,This attribute shall indicate the stationID.
.1.3.6.1.4.1.4526.4.6.7.1.9,WG302::repremotemacaddress3,OCTET,read-write,,current,,This attribute shall indicate the stationID.
.1.3.6.1.4.1.4526.4.6.7.1.10,WG302::repremotemacaddress4,OCTET,read-write,,current,,This attribute shall indicate the stationID.
.1.3.6.1.4.1.4526.4.6.7.1.11,WG302::localMacAddress,OCTET,read-only,,current,,This attribute shall indicate the local MAC Address.
.1.3.6.1.4.1.4526.4.6.8,WG302::info802dot1x,,,,,,
.1.3.6.1.4.1.4526.4.6.8.1,WG302::authinfo,,,,,,
.1.3.6.1.4.1.4526.4.6.8.1.1,WG302::priradipaddr,IpAddress,read-write,,current,,Internet address of the Primary Radius Server.
.1.3.6.1.4.1.4526.4.6.8.1.2,WG302::priradport,INTEGER,read-write,,current,,Port number used for authentication at the
.1.3.6.1.4.1.4526.4.6.8.1.3,WG302::priradsharedsecret,OCTET,read-write,,current,,Secret shared between NAS and the Primary Radius Server.
.1.3.6.1.4.1.4526.4.6.8.1.4,WG302::sndradipaddr,IpAddress,read-write,,current,,Internet address of the Second Radius Server.
.1.3.6.1.4.1.4526.4.6.8.1.5,WG302::sndradport,INTEGER,read-write,,current,,Port number used for authentication at
.1.3.6.1.4.1.4526.4.6.8.1.6,WG302::sndradsharedsecret,OCTET,read-write,,current,,Secret shared between NAS and the Second Radius Server.
.1.3.6.1.4.1.4526.4.6.8.2,WG302::accntinfo,,,,,,
.1.3.6.1.4.1.4526.4.6.8.2.1,WG302::priacntipaddr,IpAddress,read-write,,current,,IP address of the Primary radius account server.
.1.3.6.1.4.1.4526.4.6.8.2.2,WG302::priacntport,INTEGER,read-write,,current,,port number of the Primary radius account server.
.1.3.6.1.4.1.4526.4.6.8.2.3,WG302::priacntsharedsecret,OCTET,read-write,,current,,password used by the ap to connect to the Primary radius account serve.
.1.3.6.1.4.1.4526.4.6.8.2.4,WG302::sndacntipaddr,IpAddress,read-write,,current,,IP address of the Second radius account server.
.1.3.6.1.4.1.4526.4.6.8.2.5,WG302::sndacntport,INTEGER,read-write,,current,,port number of the Second radius account server.
.1.3.6.1.4.1.4526.4.6.8.2.6,WG302::sndacntsharedsecret,OCTET,read-write,,current,,password used by the ap to connect to the Second radius account server.
.1.3.6.1.4.1.4526.4.6.9,WG302::userCommand,,,,,,
.1.3.6.1.4.1.4526.4.6.9.1,WG302::resetAP,INTEGER,read-write,,current,,This a command field for conntrol AP action. Write value 1
.1.3.6.1.4.1.4526.4.6.10,WG302::timeSettings,,,,,,
.1.3.6.1.4.1.4526.4.6.10.1,WG302::currenttime,OCTET,read-only,,current,,This field indicates the current system time in a format:
.1.3.6.1.4.1.4526.4.6.10.2,WG302::timezone,INTEGER,read-write,,current,afghanistan(0):albania(1):algeria(2):american-samoa(3):andorra(4):angola(5):anguilla(6):antigua-and-barbuda(7):argentina(8):armenia(9):aruba(10):australia-lordHoweIsland(11):australia-new-south-wales-capitol-territory-victoria(12):australia-northern-territory(13):australia-queensland(14):australia-south-australia-and-broken-hill(15):australia-tasmania(16):australia-western(17):austria(18):azerbaijan(19):bahamas(20):bahrain(21):bangladesh(22):barbados(23):belarus(24):belgium(25):belize(26):benin(27):bermuda(28):bhutan(29):bolivia(30):bonaire(31):bosnia-herzegovina(32):botswana(33):brazil-east-including-all-coast-and-brasilia(34):brazil-fernando-de-noronha(35):brazil-trinity-of-acre(36):brazil-west(37):british-virgin-islands(38):brunei(39):bulgaria(40):burkina-faso(41):burma(42):burundi(43):cambodia(44):cameroon(45):canada-atlantic(46):canada-central(47):canada-eastern(48):canada-mountain(49):canada-newfoundland(50):canada-pacific-and-yukon(51):canada-saskatchewan(52):cape-verde(53):cayman-islands(54):central-african-republic(55):chad(56):chile(57):chile-easter-island(58):china(59):christmas-islands(60):cocos-keeling-islands(61):colombia(62):congo(63):cook-islands(64):costa-rica(65):cote-d-ivoire(66):croatia(67):cuba(68):curacao(69):cyprus(70):czech-republic(71):denmark(72):djibouti(73):dominica(74):the-dominican-republic(75):ecuador(76):ecuador-galapagos-islands(77):egypt(78):el-salvador(79):equatorial-guinea(80):eritrea(81):estonia(82):ethiopia(83):faroe-islands(84):fiji(85):finland(86):france(87):french-guiana(88):french-polynesia(89):gabon(90):the-gambia(91):georgia(92):germany(93):ghana(94):gibraltar(95):greece(96):greenland-scorsbysund(97):greenland-thule(98):grenada(99):guadeloupe(100):guam(101):guatemala(102):guinea-bissau(103):guyana(104):haiti(105):hawaii(106):honduras(107):hong-kong(108):hungary(109):iceland(110):india(111):indonesia-central(112):indonesia-east(113):indonesia-west(114):iran(115):iraq(116):ireland(117):israel(118):italy(119):jamaica(120):japan(121):johnston-islands(122):jordan(123):juan-fernandez-islands(124):kazakhstan(125):kenya(126):kiribati(127):kuwait(128):kyrgyzstan(129):laos(130):latvia(131):lebanon(132):leeward-islands(133):lesotho(134):liberia(135):libya(136):liechtenstein(137):lithuania(138):luxembourg(139):macao(140):macedonia(141):madagascar(142):malawi(143):malaysia(144):maldives(145):mali(146):malta(147):mariana-Islands(148):martinique(149):mauritania(150):mauritius(151):mayotte(152):mexico(153):mexico-baj-n(154):mexico-baj-s(155):midway-islands(156):moldova(157):monaco(158):mongolia(159):montenegro(160):montserrat(161):morocco(162):mozambique(163):namibia(164):nauru(165):nepal(166):the-netherlands-antilles(167):the-netherlands(168):new-caledonia(169):new-hebrides(170):new-zealand9(171):new-zealand-chatham-island(172):nicaragua(173):niger(174):nigeria(175):niue-islands(176):norfolk-island(177):north-korea(178):norway(179):oman(180):pakistan(181):palau(182):panama(183):papua-new-guinea(184):paraguay(185):peru(186):philippines(187):pitcairn-island(188):poland(189):portugal-azores(190):portugal-madeira(191):puerto-rico(192):qatar(193):reunion(194):romania(195):russia-moscow(196):russian-fed-zone-1-kaliningrad(197):russian-fed-zone-10-magadan(198):russian-fed-zone-11-petropavlovsk-kamchatsky(199):russian-fed-zone-2-st-petersburg(200):russian-fed-zone-3-izhevsk(201):russian-fed-zone-4-ekaterinburg(202):russian-fed-zone-5-novosibirsk(203):russian-fed-zone-6-krasnojarsk(204):russian-fed-zone-7-irkutsk(205):russian-fed-zone-8-yakatsk(206):russian-fed-zone-9-vladivostok(207):rwanda(208):saint-pierre-and-miquelon(209):san-marino(210):sao-tome-and-principe(211):saudi-arabia(212):senegal(213):serbia(214):the-seychelles(215):sierra-leone(216):singapore(217):slovakia(218):slovenia(219):solomon-islands(220):somalia(221):south-africa(222):south-georgia(223):south-korea(224):spain(225):spain-canary-islands(226):sri-lanka(227):st-helena(228):st-kitts-nevis(229):st-lucia(230):st-vincent-and-the-grenadines(231):sudan(232):suriname(233):swaziland(234):sweden(235):switzerland(236):syria(237):tahiti(238):taiwan(239):tajikistan(240):tanzania(241):thailand(242):togo(243):tonga(244):trinidad-and-tobago(245):tunisia(246):turkey(247):turkmenistan(248):turks-and-caicos-islands(249):tuvalu(250):uganda(251):ukraine(252):ukraine-simferopol(253):united-arab-emirates(254):united-kingdom(255):uruguay(256):us-virgin-islands(257):usa-alaska(258):usa-aleutian-islands(259):usa-arizona(260):usa-central(261):usa-eastern(262):usa-indiana(263):usa-mountain(264):usa-pacific(265):uzbekistan(266):vanuatu(267):vatican-city(268):venezuela(269):vietnam(270):wake-islands(271):wallis-and-futana-islands(272):western-samoa(273):windward-islands(274):yemen(275):zaire-kasai(276):zaire-kinshasa(277):zambia(278):zimbabwe(279),This field indicates the timezone of the system.
.1.3.6.1.4.1.4526.4.6.10.3,WG302::daylightsaving,INTEGER,read-write,,current,true(1):false(2),This attribute shall indicate the Daylight Saving time.
.1.3.6.1.4.1.4526.4.6.11,WG302::dhcpsSettings,,,,,,
.1.3.6.1.4.1.4526.4.6.11.1,WG302::dhcpserver,INTEGER,read-write,,current,true(1):false(2),This attribute shall indicate whether DHCP server is enable
.1.3.6.1.4.1.4526.4.6.11.2,WG302::dhcpsipstart,IpAddress,read-write,,current,,This attribute indicates the starting IP address of DHCP server will give.
.1.3.6.1.4.1.4526.4.6.11.3,WG302::dhcpsipend,IpAddress,read-write,,current,,This attribute indicates the ending IP address of DHCP server will give.
.1.3.6.1.4.1.4526.4.6.11.4,WG302::dhcpnetmask,IpAddress,read-write,,current,,This attribute indicates the net mask of DHCP server will give.
.1.3.6.1.4.1.4526.4.6.11.5,WG302::dhcpsgateway,IpAddress,read-write,,current,,This attribute indicates the gateway IP address of DHCP server will give.
.1.3.6.1.4.1.4526.4.6.11.6,WG302::dhcpspridns,IpAddress,read-write,,current,,This attribute indicates the primary DNS IP address of DHCP server will give.
.1.3.6.1.4.1.4526.4.6.11.7,WG302::dhcpspsnddns,IpAddress,read-write,,current,,This attribute indicates the secondary DNS IP address of DHCP server will give.
.1.3.6.1.4.1.4526.4.6.11.8,WG302::dhcpspriwins,IpAddress,read-write,,current,,This attribute indicates the primary WINS IP address of DHCP server will give.
.1.3.6.1.4.1.4526.4.6.11.9,WG302::dhcpspsndwins,IpAddress,read-write,,current,,This attribute indicates the secondary WINS IP address of DHCP server will give.
.1.3.6.1.4.1.4526.4.6.11.10,WG302::dhcpsleasetime,INTEGER,read-write,,current,,This attribute shall indicate the IP lease time of DHCP server will give
.1.3.6.1.4.1.4526.4.6.12,WG302::logSettings,,,,,,
.1.3.6.1.4.1.4526.4.6.12.1,WG302::syslog,INTEGER,read-write,,current,true(1):false(2),This attribute shall indicate whether syslog is enable 
.1.3.6.1.4.1.4526.4.6.12.2,WG302::syslogsrvip,IpAddress,read-write,,current,,This attributes shall indicates the IP address of the syslog server.
.1.3.6.1.4.1.4526.4.6.12.3,WG302::syslogsrvport,INTEGER,read-write,,current,,This attributes shall indicates the Port of the Syslog server.
.1.3.6.1.4.1.4526.4.6.13,WG302::httpRedirectSettings,,,,,,
.1.3.6.1.4.1.4526.4.6.13.1,WG302::httpRedirectEnable,INTEGER,read-write,,current,true(1):false(2),Description.
.1.3.6.1.4.1.4526.4.6.13.2,WG302::httpRedirectURL,OCTET,read-write,,current,,Description.
.1.3.6.1.4.1.4526.4.6.14,WG302::detectedApTable,,not-accessible,,current,,detectedAp Table shows list of detected neighbouring APs.
.1.3.6.1.4.1.4526.4.6.14.1,WG302::detectedApEntry,,not-accessible,apmac,current,,An entry in the detectedApTable.
.1.3.6.1.4.1.4526.4.6.14.1.1,WG302::apmac,OCTET,read-only,,current,,This attribute shall indicate MAC address of the
.1.3.6.1.4.1.4526.4.6.14.1.2,WG302::apssid,OCTET,read-only,,current,,This attribute shall indicate ssid of the detected AP.
.1.3.6.1.4.1.4526.4.6.14.1.3,WG302::apprivacy,INTEGER,read-only,,current,true(1):false(2),This attribute shall indicate whether privacy is enabled.
.1.3.6.1.4.1.4526.4.6.14.1.4,WG302::apband,OCTET,read-only,,current,,This attribute shall indicate the operating band of detected AP.
.1.3.6.1.4.1.4526.4.6.14.1.5,WG302::apchannel,INTEGER,read-only,,current,,This attribute shall indicate the channel number used.
.1.3.6.1.4.1.4526.4.6.14.1.6,WG302::aprate,INTEGER,read-only,,current,,This attribute shall indicate the rate.
.1.3.6.1.4.1.4526.4.6.14.1.7,WG302::apbeaconInterval,INTEGER,read-only,,current,,This attribute shall indicate the beacon interval in kus (1.024 ms).
.1.3.6.1.4.1.4526.4.6.14.1.8,WG302::apnumBeacons,INTEGER,read-only,,current,,This attribute shall indicate the number of beacons received.
.1.3.6.1.4.1.4526.4.6.14.1.9,WG302::aplastBeacon,INTEGER,read-only,,current,,This attribute shall indicate the time of the last beacon.
.1.3.6.1.4.1.4526.4.6.15,WG302::knownApTable,,not-accessible,,current,,knownAp Table shows list of known APs.
.1.3.6.1.4.1.4526.4.6.15.1,WG302::knownApEntry,,not-accessible,knownapmac,current,,An entry in the knownApTable.
.1.3.6.1.4.1.4526.4.6.15.1.1,WG302::knownapmac,OCTET,read-only,,current,,This attribute shall indicate MAC address of the
.1.3.6.1.4.1.4526.4.6.15.1.2,WG302::knownapssid,OCTET,read-only,,current,,This attribute shall indicate ssid of the known AP.
.1.3.6.1.4.1.4526.4.6.15.1.3,WG302::knownapprivacy,INTEGER,read-only,,current,true(1):false(2),This attribute shall indicate whether privacy is enabled.
.1.3.6.1.4.1.4526.4.6.15.1.4,WG302::knownapband,OCTET,read-only,,current,,This attribute shall indicate the operating band of known AP.
.1.3.6.1.4.1.4526.4.6.15.1.5,WG302::knownapchannel,INTEGER,read-only,,current,,This attribute shall indicate the channel number used.
.1.3.6.1.4.1.4526.4.6.15.1.6,WG302::knownaprate,INTEGER,read-only,,current,,This attribute shall indicate the rate.
.1.3.6.1.4.1.4526.4.6.15.1.7,WG302::knownapbeaconInterval,INTEGER,read-only,,current,,This attribute shall indicate the beacon interval in kus (1.024 ms).
.1.3.6.1.4.1.4526.4.6.15.1.8,WG302::knownapnumBeacons,INTEGER,read-only,,current,,This attribute shall indicate the number of beacons received.
.1.3.6.1.4.1.4526.4.6.15.1.9,WG302::knownaplastBeacon,INTEGER,read-only,,current,,This attribute shall indicate the time of the last beacon.
.1.3.6.1.4.1.4526.4.6.15.1.10,WG302::knownapEntryStatus,INTEGER,read-create,,current,,The Known AP Entry status. Supported values: active(1) - valid entry createAndGo(4) - used to create a new entry destroy(6) - removes the entry
.1.3.6.1.4.1.4526.4.6.16,WG302::unknownApTable,,not-accessible,,current,,unknownAp Table shows list of unknown APs.
.1.3.6.1.4.1.4526.4.6.16.1,WG302::unknownApEntry,,not-accessible,unknownapmac,current,,An entry in the unknownApTable.
.1.3.6.1.4.1.4526.4.6.16.1.1,WG302::unknownapmac,OCTET,read-only,,current,,This attribute shall indicate MAC address of the
.1.3.6.1.4.1.4526.4.6.16.1.2,WG302::unknownapssid,OCTET,read-only,,current,,This attribute shall indicate ssid of the unknown AP.
.1.3.6.1.4.1.4526.4.6.16.1.3,WG302::unknownapprivacy,INTEGER,read-only,,current,true(1):false(2),This attribute shall indicate whether privacy is enabled.
.1.3.6.1.4.1.4526.4.6.16.1.4,WG302::unknownapband,OCTET,read-only,,current,,This attribute shall indicate the operating band of unknown AP.
.1.3.6.1.4.1.4526.4.6.16.1.5,WG302::unknownapchannel,INTEGER,read-only,,current,,This attribute shall indicate the channel number used.
.1.3.6.1.4.1.4526.4.6.16.1.6,WG302::unknownaprate,INTEGER,read-only,,current,,This attribute shall indicate the rate.
.1.3.6.1.4.1.4526.4.6.16.1.7,WG302::unknownapbeaconInterval,INTEGER,read-only,,current,,This attribute shall indicate the beacon interval in kus (1.024 ms).
.1.3.6.1.4.1.4526.4.6.16.1.8,WG302::unknownapnumBeacons,INTEGER,read-only,,current,,This attribute shall indicate the number of beacons received.
.1.3.6.1.4.1.4526.4.6.16.1.9,WG302::unknownaplastBeacon,INTEGER,read-only,,current,,This attribute shall indicate the time of the last beacon.
.1.3.6.1.4.1.4526.4.6.17,WG302::wlanAccessControlLocalTable,,not-accessible,,current,,ACL attributes in tablular form to allow for multiple
.1.3.6.1.4.1.4526.4.6.17.1,WG302::wlanAccessControlLocalEntry,,not-accessible,aclMAC,current,,An entry in the wlanAccessControlListTable. It is possible
.1.3.6.1.4.1.4526.4.6.17.1.1,WG302::aclMAC,OCTET,read-only,,current,,This field should indicate an MAC address entry in the
.1.3.6.1.4.1.4526.4.6.17.1.2,WG302::aclMacStatus,INTEGER,read-create,,current,,The ACL Mac status. Supported values: active(1) - valid entry createAndGo(4) - used to create a new entry destroy(6) - removes the entry
.1.3.6.1.4.1.4526.4.7,BROADCOM-REF-MIB::wag302v2,,,,,,
.1.3.6.1.4.1.4526.4.7.1,WAG302::lanSettings,,,,,,
.1.3.6.1.4.1.4526.4.7.1.1,WAG302::apName,OCTET,read-write,,current,,The field indicates the name of AP. The name is also the NETBIOS name of the AP.
.1.3.6.1.4.1.4526.4.7.1.2,WAG302::sysMacAddress,OCTET,read-only,,current,,This field indicates the system MAC Address.
.1.3.6.1.4.1.4526.4.7.1.3,WAG302::sysVersion,OCTET,read-only,,current,,This field indicates the system firmware version.
.1.3.6.1.4.1.4526.4.7.1.4,WAG302::sysCountryRegion,INTEGER,read-write,,current,unitedArabEmirates(784):albania(8):armenia(51):argentina(32):austria(40):australia(36):azerbaijan(31):belgium(56):bulgaria(100):bahrain(48):brunei(96):bolivia(68):brazil(76):belarus(112):belize(84):canada(124):switzerland(756):chile(152):china(156):colombia(170):costaRica(188):cyprus(196):czechRepublic(203):germany(276):denmark(208):dominicanRepublic(214):algeria(12):ecuador(218):estonia(233):egypt(818):spain(724):finland(246):france(250):unitedKingdom(826):georgia(268):greece(300):guatemala(320):hongkong(344):honduras(340):croatia(191):hungary(348):indonesia(360):ireland(372):israel(376):india(356):iran(364):iceland(352):italy(380):jordan(400):japan(392):northKorea(408):koreaRepublic(410):kuwait(414):kazakhstan(398):lebanon(422):liechtenstein(438):lithuania(440):luxembourg(442):latvia(428):marocco(504):monaco(492):macedonia(807):macau(446):malta(470):mexico(484):malaysia(458):netherlands(528):norway(578):newZealand(554):oman(512):panama(591):peru(604):philippines(608):pakistan(586):poland(616):puertoRico(630):portugal(620):qatar(634):romania(642):russia(643):saudiArabia(682):sweden(752):singapore(702):slovakRepublic(703):slovenia(705):elSalvador(222):syria(760):thailand(764):tunisia(788):turkey(792):trinidadandTobago(780):taiwan(158):ukraine(804):unitedStates(840):uruguay(858):uzbekistan(860):venezuela(862):vietnam(704):yemen(887):southAfrica(710):zimbabwe(716),This attribute shall indicate the region of operation
.1.3.6.1.4.1.4526.4.7.1.5,WAG302::adminName,OCTET,not-accessible,,obsolete,,The field indicates the administrator name.
.1.3.6.1.4.1.4526.4.7.1.6,WAG302::adminPasswd,OCTET,not-accessible,,obsolete,,The field indicates the administrator password.
.1.3.6.1.4.1.4526.4.7.1.7,WAG302::dhcpStatus,INTEGER,read-write,,current,static(0):dhcpclient(1),This attribute shall indicate whether dhcp client status.
.1.3.6.1.4.1.4526.4.7.1.8,WAG302::ipAddr,IpAddress,read-write,,current,,The field indicates the IP address of AP on the wireless
.1.3.6.1.4.1.4526.4.7.1.9,WAG302::netmaskAddr,IpAddress,read-write,,current,,The field indicates the netmask of AP on the wireless
.1.3.6.1.4.1.4526.4.7.1.10,WAG302::gatewayAddr,IpAddress,read-write,,current,,The field indicates the gateway of AP on the wireless
.1.3.6.1.4.1.4526.4.7.1.11,WAG302::pridnsipAddr,IpAddress,read-write,,current,,This attributes shall indicates the IP address of the primary DNS server.
.1.3.6.1.4.1.4526.4.7.1.12,WAG302::snddnsipAddr,IpAddress,read-write,,current,,This attributes shall indicates the IP address of the secondary DNS server.
.1.3.6.1.4.1.4526.4.7.1.13,WAG302::spantree,INTEGER,read-write,,current,true(1):false(2),This attribute shall indicate spanning tree.
.1.3.6.1.4.1.4526.4.7.1.14,WAG302::vlanEnable,INTEGER,read-only,,current,true(1):false(2),This attribute shall indicate whether enable VLAN(802.1Q).
.1.3.6.1.4.1.4526.4.7.1.15,WAG302::managementVlanID,INTEGER,read-only,,current,,This attribute shall indicate the Management VLAN ID. 
.1.3.6.1.4.1.4526.4.7.1.16,WAG302::untaggedVlanID,INTEGER,read-only,,current,,This attribute shall indicate the Untagged VLAN ID. 
.1.3.6.1.4.1.4526.4.7.2,WAG302::wlanSettingTable,,not-accessible,,current,,wlanSettingsallow for multiple instances on an agent.
.1.3.6.1.4.1.4526.4.7.2.1,WAG302::wlanSettingEntry,,not-accessible,ifIndex,current,,An entry in the wlanSettingTable. It is possible for
.1.3.6.1.4.1.4526.4.7.2.1.1,WAG302::operatemode,INTEGER,read-only,,current,auto(0):dot11a(1):dot11b(2):dot11g(3),This attribute shall indicate the desired wireless operating mode. 
.1.3.6.1.4.1.4526.4.7.2.1.2,WAG302::radioEnable,INTEGER,read-write,,current,true(1):false(2),This attribute shall indicate whether the radio is enabled.
.1.3.6.1.4.1.4526.4.7.2.1.3,WAG302::channel,INTEGER,read-write,,current,,This attribute shall indicate the channel number to be
.1.3.6.1.4.1.4526.4.7.2.1.4,WAG302::datarate,INTEGER,read-only,,current,best(0):rate1Mbps(1000):rate2Mbps(2000):rate5dot5Mbps(5500):rate6Mbps(6000):rate9Mbps(9000):rate11Mbps(11000):rate12Mbps(12000):rate18Mbps(18000):rate24Mbps(24000):rate36Mbps(36000):rate48Mbps(48000):rate54Mbps(54000),This attribute shall indicate the transmite rate. When
.1.3.6.1.4.1.4526.4.7.2.1.5,WAG302::wmmSupport,INTEGER,read-write,,current,true(1):false(2),This field indicates whether support WMM(Wireless Multimedia).
.1.3.6.1.4.1.4526.4.7.2.1.6,WAG302::beaconinterval,INTEGER,read-write,,current,,This attribute shall indicate the Beacon Interval.
.1.3.6.1.4.1.4526.4.7.2.1.7,WAG302::rtsthreshold,INTEGER,read-write,,current,,This attribute shall indicate the RTS threshold.
.1.3.6.1.4.1.4526.4.7.2.1.8,WAG302::fraglength,INTEGER,read-write,,current,,This attribute shall indicate the fragmentation threshold.
.1.3.6.1.4.1.4526.4.7.2.1.9,WAG302::dtiminterval,INTEGER,read-write,,current,,This attribute shall indicate the DTIM period.
.1.3.6.1.4.1.4526.4.7.2.1.10,WAG302::preambletype,INTEGER,read-only,,current,long(0):auto(1),This attribute shall indicate the preamble setting.
.1.3.6.1.4.1.4526.4.7.2.1.11,WAG302::txpower,INTEGER,read-write,,current,full(0):half(1):quarter(2):eighth(3):min(4),This attribute shall indicate the tranmiste power.
.1.3.6.1.4.1.4526.4.7.2.1.12,WAG302::superG,INTEGER,read-write,,current,true(1):false(2),This attribute shall indicate whether super mode (super-A
.1.3.6.1.4.1.4526.4.7.2.1.13,WAG302::accessControlMode,INTEGER,read-only,,current,disabled(0):local(2):server(3),The field indicates whether the access control list is
.1.3.6.1.4.1.4526.4.7.2.1.14,WAG302::antenna,INTEGER,read-write,,obsolete,auto(0):primary(1):secondary(2),This attribute shall indicate the tranmistted power.
.1.3.6.1.4.1.4526.4.7.3,WAG302::vapSetting,,,,,,
.1.3.6.1.4.1.4526.4.7.3.1,WAG302::vapWepAndGlobalSettingTable,,not-accessible,,current,,VAP attributes setting table.
.1.3.6.1.4.1.4526.4.7.3.1.1,WAG302::vapWepAndGlobalSettingEntry,,not-accessible,ifIndex:vapIndex,current,, VAP attributes setting table.
.1.3.6.1.4.1.4526.4.7.3.1.1.1,WAG302::wepKeyType,INTEGER,read-write,,current,hex64(40):hex128(104):hex152(128),The field shall indicate the type of WEP key.
.1.3.6.1.4.1.4526.4.7.3.1.1.2,WAG302::key1,OCTET,read-write,,current,,The field indicates the key value of the first default wep key.
.1.3.6.1.4.1.4526.4.7.3.1.1.3,WAG302::key2,OCTET,read-write,,current,,The field indicates the key value of the second default wep key.
.1.3.6.1.4.1.4526.4.7.3.1.1.4,WAG302::key3,OCTET,read-write,,current,,The field indicates the key value of the third default wep key.
.1.3.6.1.4.1.4526.4.7.3.1.1.5,WAG302::key4,OCTET,read-write,,current,,The field indicates the key value of the fourth default wep key.
.1.3.6.1.4.1.4526.4.7.3.1.1.6,WAG302::wepPassPhrase,OCTET,read-write,,current,,This attribute shall indicate WEP pass phrase, used to
.1.3.6.1.4.1.4526.4.7.3.2,WAG302::vapSettingTable,,not-accessible,,current,,VAP attributes setting table.
.1.3.6.1.4.1.4526.4.7.3.2.1,WAG302::vapSettingEntry,,not-accessible,ifIndex:vapIndex,current,,VAP attributes setting table.
.1.3.6.1.4.1.4526.4.7.3.2.1.1,WAG302::vapIndex,INTEGER,read-only,,current,,Description.
.1.3.6.1.4.1.4526.4.7.3.2.1.2,WAG302::vapEnable,INTEGER,read-write,,current,true(1):false(2),This attribute shall indicate whether enable VAP.
.1.3.6.1.4.1.4526.4.7.3.2.1.3,WAG302::ssid,OCTET,read-write,,current,,This attribute shall indicate SSID.Its length can't be large than 33 .
.1.3.6.1.4.1.4526.4.7.3.2.1.4,WAG302::hidenetworkname,INTEGER,read-write,,current,true(1):false(2),This attribute shall indicate whether broadcast wireless network Name (SSID).
.1.3.6.1.4.1.4526.4.7.3.2.1.5,WAG302::vlanID,INTEGER,read-write,,current,,This attribute shall indicate the VLAN ID. 
.1.3.6.1.4.1.4526.4.7.3.2.1.6,WAG302::securityProfileName,OCTET,read-write,,current,,Description.
.1.3.6.1.4.1.4526.4.7.3.2.1.7,WAG302::presharekey,OCTET,read-write,,current,,This attribute shall indicate preshare key.
.1.3.6.1.4.1.4526.4.7.3.2.1.8,WAG302::authenticationtype,INTEGER,read-write,,current,open(0):shared(1):legacy802dot1x(2):wpa(4):wpa2(8):wpaORwpa2(12):wpapsk(16):wpa2psk(32):wpapskORwpa2psk(48),The field indicates how to authenticate the station.
.1.3.6.1.4.1.4526.4.7.3.2.1.9,WAG302::encryption,INTEGER,read-write,,current,none(0):wep(1):tkip(2):aes(4):tkipORaes(6),The field indicates how to encryption the station.
.1.3.6.1.4.1.4526.4.7.3.2.1.10,WAG302::keyno,INTEGER,read-write,,current,,The field indicates the number of default wep key.
.1.3.6.1.4.1.4526.4.7.3.2.1.11,WAG302::wlanseparator,INTEGER,read-write,,current,true(1):false(2),This attribute shall indicate whether enable No see.
.1.3.6.1.4.1.4526.4.7.4,WAG302::remoteSettings,,,,,,
.1.3.6.1.4.1.4526.4.7.4.1,WAG302::sshd,INTEGER,read-write,,current,true(1):false(2),This attribute shall indicate whether the SSH is enabled.
.1.3.6.1.4.1.4526.4.7.4.2,WAG302::snmpenable,INTEGER,read-only,,current,true(1):false(2),This attribute shall indicate whether the SNMP agent is
.1.3.6.1.4.1.4526.4.7.4.3,WAG302::trapServerIP,IpAddress,read-write,,current,,The field indicates the trap server IP address.
.1.3.6.1.4.1.4526.4.7.4.4,WAG302::trapServerCommunity,OCTET,read-write,,current,,The field indicates the community name for traps.
.1.3.6.1.4.1.4526.4.7.4.5,WAG302::readOnlyCommunity,OCTET,read-write,,current,,The field indicates the read only community name.
.1.3.6.1.4.1.4526.4.7.4.6,WAG302::readWriteCommunity,OCTET,read-write,,current,,The field indicates the read write community name.
.1.3.6.1.4.1.4526.4.7.5,WAG302::statistic,,,,,,
.1.3.6.1.4.1.4526.4.7.5.1,WAG302::wiredethernetstat,,,,,,
.1.3.6.1.4.1.4526.4.7.5.1.1,WAG302::lanrecvpacket,Unsigned32,read-only,,current,,the field indicates the sum of received packets.
.1.3.6.1.4.1.4526.4.7.5.1.2,WAG302::lantranspacket,Unsigned32,read-only,,current,,the field indicates the sum of transmitted packets.
.1.3.6.1.4.1.4526.4.7.5.1.3,WAG302::lanrecvbytes,Unsigned32,read-only,,current,,the field indicates the sum of received bytes.
.1.3.6.1.4.1.4526.4.7.5.1.4,WAG302::lantransbytes,Unsigned32,read-only,,current,,the field indicates the sum of transmitted bytes.
.1.3.6.1.4.1.4526.4.7.5.2,WAG302::wirelessStatTable,,not-accessible,,current,,Description.
.1.3.6.1.4.1.4526.4.7.5.2.1,WAG302::wirelessStatEntry,,not-accessible,ifIndex,current,,Description.
.1.3.6.1.4.1.4526.4.7.5.2.1.1,WAG302::wlanrecvunicastpacket,Unsigned32,read-only,,current,,the field indicates the sum of received unicast packets.
.1.3.6.1.4.1.4526.4.7.5.2.1.2,WAG302::wlantransunicastpacket,Unsigned32,read-only,,current,,the field indicates the sum of transmitted unicast packets.
.1.3.6.1.4.1.4526.4.7.5.2.1.3,WAG302::wlanrecvbroadcastpacket,Unsigned32,read-only,,current,,the field indicates the sum of received broadcast packets.
.1.3.6.1.4.1.4526.4.7.5.2.1.4,WAG302::wlantransbroadcastpacket,Unsigned32,read-only,,current,,the field indicates the sum of transmitted broadcast packets.
.1.3.6.1.4.1.4526.4.7.5.2.1.5,WAG302::wlanrecvmulticastpacket,Unsigned32,read-only,,current,,the field indicates the sum of received multicast packets.
.1.3.6.1.4.1.4526.4.7.5.2.1.6,WAG302::wlantransmulticastpacket,Unsigned32,read-only,,current,,the field indicates the sum of transmitted multicast packets.
.1.3.6.1.4.1.4526.4.7.5.2.1.7,WAG302::wlanrecvpacket,Unsigned32,read-only,,current,,the field indicates the sum of received packets.
.1.3.6.1.4.1.4526.4.7.5.2.1.8,WAG302::wlantranspacket,Unsigned32,read-only,,current,,the field indicates the sum of transmitted packets.
.1.3.6.1.4.1.4526.4.7.5.2.1.9,WAG302::wlanrecvbytes,Unsigned32,read-only,,current,,the field indicates the sum of received bytes.
.1.3.6.1.4.1.4526.4.7.5.2.1.10,WAG302::wlantransbytes,Unsigned32,read-only,,current,,the field indicates the sum of transmitted bytes.
.1.3.6.1.4.1.4526.4.7.6,WAG302::stationListTable,,not-accessible,,current,,stationList Table show multiple instances on an agent.
.1.3.6.1.4.1.4526.4.7.6.1,WAG302::stationListEntry,,not-accessible,ifIndex:macaddress,current,,An entry in the wlanClientsTable. It is possible for there
.1.3.6.1.4.1.4526.4.7.6.1.1,WAG302::macaddress,OCTET,read-only,,current,,This attribute shall indicate MAC address of the
.1.3.6.1.4.1.4526.4.7.6.1.2,WAG302::clientIpaddr,IpAddress,read-only,,current,,This attribute shall indicate Ip address of the associated stationID.
.1.3.6.1.4.1.4526.4.7.6.1.3,WAG302::clientWirelessMode,INTEGER,read-only,,current,dot11a(1):dot11b(2):dot11g(3),This attribute shall indicate the wireless mode of the
.1.3.6.1.4.1.4526.4.7.6.1.4,WAG302::stationstatus,INTEGER,read-only,,current,none(0):authenticating(1):authenticated(2):associating(3):associated(4),This attribute shall indicate the status of station.
.1.3.6.1.4.1.4526.4.7.7,WAG302::wlanWdsTable,,not-accessible,,current,,WDS attributes in tablular form to allow for multiple
.1.3.6.1.4.1.4526.4.7.7.1,WAG302::wlanWdsEntry,,not-accessible,ifIndex,current,,An entry in the wlanWdsTable. It is possible for there to
.1.3.6.1.4.1.4526.4.7.7.1.1,WAG302::apmode,INTEGER,read-only,,current,ap(0):ptp(2):ptp-ap(3):pxp(4):pxp-ap(5):repeater(6),This a command field for conntrol AP operation mode. 
.1.3.6.1.4.1.4526.4.7.7.1.2,WAG302::ptpremotemacaddress,OCTET,read-write,,current,,This attribute shall indicate the stationID.
.1.3.6.1.4.1.4526.4.7.7.1.3,WAG302::pxpremotemacaddress1,OCTET,read-write,,current,,This attribute shall indicate the stationID.
.1.3.6.1.4.1.4526.4.7.7.1.4,WAG302::pxpremotemacaddress2,OCTET,read-write,,current,,This attribute shall indicate the stationID.
.1.3.6.1.4.1.4526.4.7.7.1.5,WAG302::pxpremotemacaddress3,OCTET,read-write,,current,,This attribute shall indicate the stationID.
.1.3.6.1.4.1.4526.4.7.7.1.6,WAG302::pxpremotemacaddress4,OCTET,read-write,,current,,This attribute shall indicate the stationID.
.1.3.6.1.4.1.4526.4.7.7.1.7,WAG302::repremotemacaddress1,OCTET,read-write,,current,,This attribute shall indicate the stationID.
.1.3.6.1.4.1.4526.4.7.7.1.8,WAG302::repremotemacaddress2,OCTET,read-write,,current,,This attribute shall indicate the stationID.
.1.3.6.1.4.1.4526.4.7.7.1.9,WAG302::repremotemacaddress3,OCTET,read-write,,current,,This attribute shall indicate the stationID.
.1.3.6.1.4.1.4526.4.7.7.1.10,WAG302::repremotemacaddress4,OCTET,read-write,,current,,This attribute shall indicate the stationID.
.1.3.6.1.4.1.4526.4.7.7.1.11,WAG302::localMacAddress,OCTET,read-only,,current,,This attribute shall indicate the local MAC Address.
.1.3.6.1.4.1.4526.4.7.8,WAG302::info802dot1x,,,,,,
.1.3.6.1.4.1.4526.4.7.8.1,WAG302::authinfo,,,,,,
.1.3.6.1.4.1.4526.4.7.8.1.1,WAG302::priradipaddr,IpAddress,read-write,,current,,Internet address of the Primary Radius Server.
.1.3.6.1.4.1.4526.4.7.8.1.2,WAG302::priradport,INTEGER,read-write,,current,,Port number used for authentication at the
.1.3.6.1.4.1.4526.4.7.8.1.3,WAG302::priradsharedsecret,OCTET,read-write,,current,,Secret shared between NAS and the Primary Radius Server.
.1.3.6.1.4.1.4526.4.7.8.1.4,WAG302::sndradipaddr,IpAddress,read-write,,current,,Internet address of the Second Radius Server.
.1.3.6.1.4.1.4526.4.7.8.1.5,WAG302::sndradport,INTEGER,read-write,,current,,Port number used for authentication at
.1.3.6.1.4.1.4526.4.7.8.1.6,WAG302::sndradsharedsecret,OCTET,read-write,,current,,Secret shared between NAS and the Second Radius Server.
.1.3.6.1.4.1.4526.4.7.8.2,WAG302::accntinfo,,,,,,
.1.3.6.1.4.1.4526.4.7.8.2.1,WAG302::priacntipaddr,IpAddress,read-write,,current,,IP address of the Primary radius account server.
.1.3.6.1.4.1.4526.4.7.8.2.2,WAG302::priacntport,INTEGER,read-write,,current,,port number of the Primary radius account server.
.1.3.6.1.4.1.4526.4.7.8.2.3,WAG302::priacntsharedsecret,OCTET,read-write,,current,,password used by the ap to connect to the Primary radius account serve.
.1.3.6.1.4.1.4526.4.7.8.2.4,WAG302::sndacntipaddr,IpAddress,read-write,,current,,IP address of the Second radius account server.
.1.3.6.1.4.1.4526.4.7.8.2.5,WAG302::sndacntport,INTEGER,read-write,,current,,port number of the Second radius account server.
.1.3.6.1.4.1.4526.4.7.8.2.6,WAG302::sndacntsharedsecret,OCTET,read-write,,current,,password used by the ap to connect to the Second radius account server.
.1.3.6.1.4.1.4526.4.7.9,WAG302::userCommand,,,,,,
.1.3.6.1.4.1.4526.4.7.9.1,WAG302::resetAP,INTEGER,read-write,,current,,This a command field for conntrol AP action. Write value 1
.1.3.6.1.4.1.4526.4.7.10,WAG302::timeSettings,,,,,,
.1.3.6.1.4.1.4526.4.7.10.1,WAG302::currenttime,OCTET,read-only,,current,,This field indicates the current system time in a format:
.1.3.6.1.4.1.4526.4.7.10.2,WAG302::timezone,INTEGER,read-write,,current,afghanistan(0):albania(1):algeria(2):american-samoa(3):andorra(4):angola(5):anguilla(6):antigua-and-barbuda(7):argentina(8):armenia(9):aruba(10):australia-lordHoweIsland(11):australia-new-south-wales-capitol-territory-victoria(12):australia-northern-territory(13):australia-queensland(14):australia-south-australia-and-broken-hill(15):australia-tasmania(16):australia-western(17):austria(18):azerbaijan(19):bahamas(20):bahrain(21):bangladesh(22):barbados(23):belarus(24):belgium(25):belize(26):benin(27):bermuda(28):bhutan(29):bolivia(30):bonaire(31):bosnia-herzegovina(32):botswana(33):brazil-east-including-all-coast-and-brasilia(34):brazil-fernando-de-noronha(35):brazil-trinity-of-acre(36):brazil-west(37):british-virgin-islands(38):brunei(39):bulgaria(40):burkina-faso(41):burma(42):burundi(43):cambodia(44):cameroon(45):canada-atlantic(46):canada-central(47):canada-eastern(48):canada-mountain(49):canada-newfoundland(50):canada-pacific-and-yukon(51):canada-saskatchewan(52):cape-verde(53):cayman-islands(54):central-african-republic(55):chad(56):chile(57):chile-easter-island(58):china(59):christmas-islands(60):cocos-keeling-islands(61):colombia(62):congo(63):cook-islands(64):costa-rica(65):cote-d-ivoire(66):croatia(67):cuba(68):curacao(69):cyprus(70):czech-republic(71):denmark(72):djibouti(73):dominica(74):the-dominican-republic(75):ecuador(76):ecuador-galapagos-islands(77):egypt(78):el-salvador(79):equatorial-guinea(80):eritrea(81):estonia(82):ethiopia(83):faroe-islands(84):fiji(85):finland(86):france(87):french-guiana(88):french-polynesia(89):gabon(90):the-gambia(91):georgia(92):germany(93):ghana(94):gibraltar(95):greece(96):greenland-scorsbysund(97):greenland-thule(98):grenada(99):guadeloupe(100):guam(101):guatemala(102):guinea-bissau(103):guyana(104):haiti(105):hawaii(106):honduras(107):hong-kong(108):hungary(109):iceland(110):india(111):indonesia-central(112):indonesia-east(113):indonesia-west(114):iran(115):iraq(116):ireland(117):israel(118):italy(119):jamaica(120):japan(121):johnston-islands(122):jordan(123):juan-fernandez-islands(124):kazakhstan(125):kenya(126):kiribati(127):kuwait(128):kyrgyzstan(129):laos(130):latvia(131):lebanon(132):leeward-islands(133):lesotho(134):liberia(135):libya(136):liechtenstein(137):lithuania(138):luxembourg(139):macao(140):macedonia(141):madagascar(142):malawi(143):malaysia(144):maldives(145):mali(146):malta(147):mariana-Islands(148):martinique(149):mauritania(150):mauritius(151):mayotte(152):mexico(153):mexico-baj-n(154):mexico-baj-s(155):midway-islands(156):moldova(157):monaco(158):mongolia(159):montenegro(160):montserrat(161):morocco(162):mozambique(163):namibia(164):nauru(165):nepal(166):the-netherlands-antilles(167):the-netherlands(168):new-caledonia(169):new-hebrides(170):new-zealand9(171):new-zealand-chatham-island(172):nicaragua(173):niger(174):nigeria(175):niue-islands(176):norfolk-island(177):north-korea(178):norway(179):oman(180):pakistan(181):palau(182):panama(183):papua-new-guinea(184):paraguay(185):peru(186):philippines(187):pitcairn-island(188):poland(189):portugal-azores(190):portugal-madeira(191):puerto-rico(192):qatar(193):reunion(194):romania(195):russia-moscow(196):russian-fed-zone-1-kaliningrad(197):russian-fed-zone-10-magadan(198):russian-fed-zone-11-petropavlovsk-kamchatsky(199):russian-fed-zone-2-st-petersburg(200):russian-fed-zone-3-izhevsk(201):russian-fed-zone-4-ekaterinburg(202):russian-fed-zone-5-novosibirsk(203):russian-fed-zone-6-krasnojarsk(204):russian-fed-zone-7-irkutsk(205):russian-fed-zone-8-yakatsk(206):russian-fed-zone-9-vladivostok(207):rwanda(208):saint-pierre-and-miquelon(209):san-marino(210):sao-tome-and-principe(211):saudi-arabia(212):senegal(213):serbia(214):the-seychelles(215):sierra-leone(216):singapore(217):slovakia(218):slovenia(219):solomon-islands(220):somalia(221):south-africa(222):south-georgia(223):south-korea(224):spain(225):spain-canary-islands(226):sri-lanka(227):st-helena(228):st-kitts-nevis(229):st-lucia(230):st-vincent-and-the-grenadines(231):sudan(232):suriname(233):swaziland(234):sweden(235):switzerland(236):syria(237):tahiti(238):taiwan(239):tajikistan(240):tanzania(241):thailand(242):togo(243):tonga(244):trinidad-and-tobago(245):tunisia(246):turkey(247):turkmenistan(248):turks-and-caicos-islands(249):tuvalu(250):uganda(251):ukraine(252):ukraine-simferopol(253):united-arab-emirates(254):united-kingdom(255):uruguay(256):us-virgin-islands(257):usa-alaska(258):usa-aleutian-islands(259):usa-arizona(260):usa-central(261):usa-eastern(262):usa-indiana(263):usa-mountain(264):usa-pacific(265):uzbekistan(266):vanuatu(267):vatican-city(268):venezuela(269):vietnam(270):wake-islands(271):wallis-and-futana-islands(272):western-samoa(273):windward-islands(274):yemen(275):zaire-kasai(276):zaire-kinshasa(277):zambia(278):zimbabwe(279),This field indicates the timezone of the system.
.1.3.6.1.4.1.4526.4.7.10.3,WAG302::daylightsaving,INTEGER,read-write,,current,true(1):false(2),This attribute shall indicate the Daylight Saving time.
.1.3.6.1.4.1.4526.4.7.11,WAG302::dhcpsSettings,,,,,,
.1.3.6.1.4.1.4526.4.7.11.1,WAG302::dhcpserver,INTEGER,read-write,,current,true(1):false(2),This attribute shall indicate whether DHCP server is enable
.1.3.6.1.4.1.4526.4.7.11.2,WAG302::dhcpsipstart,IpAddress,read-write,,current,,This attribute indicates the starting IP address of DHCP server will give.
.1.3.6.1.4.1.4526.4.7.11.3,WAG302::dhcpsipend,IpAddress,read-write,,current,,This attribute indicates the ending IP address of DHCP server will give.
.1.3.6.1.4.1.4526.4.7.11.4,WAG302::dhcpnetmask,IpAddress,read-write,,current,,This attribute indicates the net mask of DHCP server will give.
.1.3.6.1.4.1.4526.4.7.11.5,WAG302::dhcpsgateway,IpAddress,read-write,,current,,This attribute indicates the gateway IP address of DHCP server will give.
.1.3.6.1.4.1.4526.4.7.11.6,WAG302::dhcpspridns,IpAddress,read-write,,current,,This attribute indicates the primary DNS IP address of DHCP server will give.
.1.3.6.1.4.1.4526.4.7.11.7,WAG302::dhcpspsnddns,IpAddress,read-write,,current,,This attribute indicates the secondary DNS IP address of DHCP server will give.
.1.3.6.1.4.1.4526.4.7.11.8,WAG302::dhcpspriwins,IpAddress,read-write,,current,,This attribute indicates the primary WINS IP address of DHCP server will give.
.1.3.6.1.4.1.4526.4.7.11.9,WAG302::dhcpspsndwins,IpAddress,read-write,,current,,This attribute indicates the secondary WINS IP address of DHCP server will give.
.1.3.6.1.4.1.4526.4.7.11.10,WAG302::dhcpsleasetime,INTEGER,read-write,,current,,This attribute shall indicate the IP lease time of DHCP server will give
.1.3.6.1.4.1.4526.4.7.12,WAG302::logSettings,,,,,,
.1.3.6.1.4.1.4526.4.7.12.1,WAG302::syslog,INTEGER,read-write,,current,true(1):false(2),This attribute shall indicate whether syslog is enable 
.1.3.6.1.4.1.4526.4.7.12.2,WAG302::syslogsrvip,IpAddress,read-write,,current,,This attributes shall indicates the IP address of the syslog server.
.1.3.6.1.4.1.4526.4.7.12.3,WAG302::syslogsrvport,INTEGER,read-write,,current,,This attributes shall indicates the Port of the Syslog server.
.1.3.6.1.4.1.4526.4.7.13,WAG302::httpRedirectSettings,,,,,,
.1.3.6.1.4.1.4526.4.7.13.1,WAG302::httpRedirectEnable,INTEGER,read-write,,current,true(1):false(2),Description.
.1.3.6.1.4.1.4526.4.7.13.2,WAG302::httpRedirectURL,OCTET,read-write,,current,,Description.
.1.3.6.1.4.1.4526.4.7.14,WAG302::detectedApTable,,not-accessible,,current,,detectedAp Table shows list of detected neighbouring APs.
.1.3.6.1.4.1.4526.4.7.14.1,WAG302::detectedApEntry,,not-accessible,apmac,current,,An entry in the detectedApTable.
.1.3.6.1.4.1.4526.4.7.14.1.1,WAG302::apmac,OCTET,read-only,,current,,This attribute shall indicate MAC address of the
.1.3.6.1.4.1.4526.4.7.14.1.2,WAG302::apssid,OCTET,read-only,,current,,This attribute shall indicate ssid of the detected AP.
.1.3.6.1.4.1.4526.4.7.14.1.3,WAG302::apprivacy,INTEGER,read-only,,current,true(1):false(2),This attribute shall indicate whether privacy is enabled.
.1.3.6.1.4.1.4526.4.7.14.1.4,WAG302::apband,OCTET,read-only,,current,,This attribute shall indicate the operating band of detected AP.
.1.3.6.1.4.1.4526.4.7.14.1.5,WAG302::apchannel,INTEGER,read-only,,current,,This attribute shall indicate the channel number used.
.1.3.6.1.4.1.4526.4.7.14.1.6,WAG302::aprate,INTEGER,read-only,,current,,This attribute shall indicate the rate.
.1.3.6.1.4.1.4526.4.7.14.1.7,WAG302::apbeaconInterval,INTEGER,read-only,,current,,This attribute shall indicate the beacon interval in kus (1.024 ms).
.1.3.6.1.4.1.4526.4.7.14.1.8,WAG302::apnumBeacons,INTEGER,read-only,,current,,This attribute shall indicate the number of beacons received.
.1.3.6.1.4.1.4526.4.7.14.1.9,WAG302::aplastBeacon,INTEGER,read-only,,current,,This attribute shall indicate the time of the last beacon.
.1.3.6.1.4.1.4526.4.7.15,WAG302::knownApTable,,not-accessible,,current,,knownAp Table shows list of known APs.
.1.3.6.1.4.1.4526.4.7.15.1,WAG302::knownApEntry,,not-accessible,knownapmac,current,,An entry in the knownApTable.
.1.3.6.1.4.1.4526.4.7.15.1.1,WAG302::knownapmac,OCTET,read-only,,current,,This attribute shall indicate MAC address of the
.1.3.6.1.4.1.4526.4.7.15.1.2,WAG302::knownapssid,OCTET,read-only,,current,,This attribute shall indicate ssid of the known AP.
.1.3.6.1.4.1.4526.4.7.15.1.3,WAG302::knownapprivacy,INTEGER,read-only,,current,true(1):false(2),This attribute shall indicate whether privacy is enabled.
.1.3.6.1.4.1.4526.4.7.15.1.4,WAG302::knownapband,OCTET,read-only,,current,,This attribute shall indicate the operating band of known AP.
.1.3.6.1.4.1.4526.4.7.15.1.5,WAG302::knownapchannel,INTEGER,read-only,,current,,This attribute shall indicate the channel number used.
.1.3.6.1.4.1.4526.4.7.15.1.6,WAG302::knownaprate,INTEGER,read-only,,current,,This attribute shall indicate the rate.
.1.3.6.1.4.1.4526.4.7.15.1.7,WAG302::knownapbeaconInterval,INTEGER,read-only,,current,,This attribute shall indicate the beacon interval in kus (1.024 ms).
.1.3.6.1.4.1.4526.4.7.15.1.8,WAG302::knownapnumBeacons,INTEGER,read-only,,current,,This attribute shall indicate the number of beacons received.
.1.3.6.1.4.1.4526.4.7.15.1.9,WAG302::knownaplastBeacon,INTEGER,read-only,,current,,This attribute shall indicate the time of the last beacon.
.1.3.6.1.4.1.4526.4.7.15.1.10,WAG302::knownapEntryStatus,INTEGER,read-create,,current,,The Known AP Entry status. Supported values: active(1) - valid entry createAndGo(4) - used to create a new entry destroy(6) - removes the entry
.1.3.6.1.4.1.4526.4.7.16,WAG302::unknownApTable,,not-accessible,,current,,unknownAp Table shows list of unknown APs.
.1.3.6.1.4.1.4526.4.7.16.1,WAG302::unknownApEntry,,not-accessible,unknownapmac,current,,An entry in the unknownApTable.
.1.3.6.1.4.1.4526.4.7.16.1.1,WAG302::unknownapmac,OCTET,read-only,,current,,This attribute shall indicate MAC address of the
.1.3.6.1.4.1.4526.4.7.16.1.2,WAG302::unknownapssid,OCTET,read-only,,current,,This attribute shall indicate ssid of the unknown AP.
.1.3.6.1.4.1.4526.4.7.16.1.3,WAG302::unknownapprivacy,INTEGER,read-only,,current,true(1):false(2),This attribute shall indicate whether privacy is enabled.
.1.3.6.1.4.1.4526.4.7.16.1.4,WAG302::unknownapband,OCTET,read-only,,current,,This attribute shall indicate the operating band of unknown AP.
.1.3.6.1.4.1.4526.4.7.16.1.5,WAG302::unknownapchannel,INTEGER,read-only,,current,,This attribute shall indicate the channel number used.
.1.3.6.1.4.1.4526.4.7.16.1.6,WAG302::unknownaprate,INTEGER,read-only,,current,,This attribute shall indicate the rate.
.1.3.6.1.4.1.4526.4.7.16.1.7,WAG302::unknownapbeaconInterval,INTEGER,read-only,,current,,This attribute shall indicate the beacon interval in kus (1.024 ms).
.1.3.6.1.4.1.4526.4.7.16.1.8,WAG302::unknownapnumBeacons,INTEGER,read-only,,current,,This attribute shall indicate the number of beacons received.
.1.3.6.1.4.1.4526.4.7.16.1.9,WAG302::unknownaplastBeacon,INTEGER,read-only,,current,,This attribute shall indicate the time of the last beacon.
.1.3.6.1.4.1.4526.4.7.17,WAG302::wlanAccessControlLocalTable,,not-accessible,,current,,ACL attributes in tablular form to allow for multiple
.1.3.6.1.4.1.4526.4.7.17.1,WAG302::wlanAccessControlLocalEntry,,not-accessible,aclMAC,current,,An entry in the wlanAccessControlListTable. It is possible
.1.3.6.1.4.1.4526.4.7.17.1.1,WAG302::aclMAC,OCTET,read-only,,current,,This field should indicate an MAC address entry in the
.1.3.6.1.4.1.4526.4.7.17.1.2,WAG302::aclMacStatus,INTEGER,read-create,,current,,The ACL Mac status. Supported values: active(1) - valid entry createAndGo(4) - used to create a new entry destroy(6) - removes the entry
.1.3.6.1.4.1.4526.5,BROADCOM-REF-MIB::rps,,,,,,
.1.3.6.1.4.1.4526.6,BROADCOM-REF-MIB::wlanswitch,,,,,,
.1.3.6.1.4.1.4526.6.1,BROADCOM-REF-MIB::wls538,,,,,,
.1.3.6.1.4.1.4526.10,BROADCOM-REF-MIB::ng7000managedswitch,,,,,,
.1.3.6.1.4.1.4526.10.1,FASTPATH-SWITCHING-MIB::fastPathSwitching,,,,,,The Netgear Private MIB for FastPath Switching
.1.3.6.1.4.1.4526.10.1.0,FASTPATH-SWITCHING-MIB::fastPathSwitchingTraps,,,,,,
.1.3.6.1.4.1.4526.10.1.0.1,FASTPATH-SWITCHING-MIB::multipleUsersTrap,,,,,,This trap is sent when more than one user is logged in with administrative access. Only applies to CLI interface.
.1.3.6.1.4.1.4526.10.1.0.2,FASTPATH-SWITCHING-MIB::broadcastStormStartTrap,,,,,,This trap is sent when a broadcast storm is detected.
.1.3.6.1.4.1.4526.10.1.0.3,FASTPATH-SWITCHING-MIB::broadcastStormEndTrap,,,,,,This trap is sent when a broadcast storm is no longer detected.
.1.3.6.1.4.1.4526.10.1.0.4,FASTPATH-SWITCHING-MIB::linkFailureTrap,,,,,,
.1.3.6.1.4.1.4526.10.1.0.5,FASTPATH-SWITCHING-MIB::vlanRequestFailureTrap,,,,,,
.1.3.6.1.4.1.4526.10.1.0.6,FASTPATH-SWITCHING-MIB::vlanDeleteLastTrap,,,,,,Trap is sent when attempting to delete the last configured VLAN or the Default VLAN.
.1.3.6.1.4.1.4526.10.1.0.7,FASTPATH-SWITCHING-MIB::vlanDefaultCfgFailureTrap,,,,,,Trap is sent if there are failures in resetting VLAN configuration to defaults.
.1.3.6.1.4.1.4526.10.1.0.8,FASTPATH-SWITCHING-MIB::vlanRestoreFailureTrap,,,,,,
.1.3.6.1.4.1.4526.10.1.0.9,FASTPATH-SWITCHING-MIB::fanFailureTrap,,,,,,
.1.3.6.1.4.1.4526.10.1.0.10,FASTPATH-SWITCHING-MIB::stpInstanceNewRootTrap,,,,,,Trap is sent when this machine is a new STP Root when there is more than one STP instance.
.1.3.6.1.4.1.4526.10.1.0.11,FASTPATH-SWITCHING-MIB::stpInstanceTopologyChangeTrap,,,,,,Trap is sent when there is a STP topology change when there is more than one STP instance.
.1.3.6.1.4.1.4526.10.1.0.12,FASTPATH-SWITCHING-MIB::powerSupplyStatusChangeTrap,,,,,,
.1.3.6.1.4.1.4526.10.1.0.13,FASTPATH-SWITCHING-MIB::failedUserLoginTrap,,,,,,Trap is sent when a user fails to authenticate via the CLI or Web interfaces.
.1.3.6.1.4.1.4526.10.1.0.14,FASTPATH-SWITCHING-MIB::userLockoutTrap,,,,,,Trap is sent when a user account is locked due to consecutive failed login attempts via the CLI or Web interfaces beyond the allowed limit.
.1.3.6.1.4.1.4526.10.1.0.15,FASTPATH-SWITCHING-MIB::topologyChangeInitiatedTrap,,,,,,Trap is sent once an interface gets a Topology change event on a port.
.1.3.6.1.4.1.4526.10.1.0.16,FASTPATH-SWITCHING-MIB::stpInstanceLoopInconsistentStartTrap,,,,,,Trap is sent when this port in this STP instance enters loop inconsistent state upon failure to receive a BPDU.
.1.3.6.1.4.1.4526.10.1.0.17,FASTPATH-SWITCHING-MIB::stpInstanceLoopInconsistentEndTrap,,,,,,Trap is sent when this port in this STP instance exits loop inconsistent state upon reception of a BPDU.
.1.3.6.1.4.1.4526.10.1.0.18,FASTPATH-SWITCHING-MIB::dhcpSnoopingIntfErrorDisabledTrap,,,,,,Trap is sent once an interface is error disabled by DHCP Snooping when the incoming packet rate exceeded configured rate limit during a burst-interval.
.1.3.6.1.4.1.4526.10.1.0.19,FASTPATH-SWITCHING-MIB::noStartupConfigTrap,,,,,,Trap is sent when startup-config file exists and SSH is enabled.
.1.3.6.1.4.1.4526.10.1.0.20,FASTPATH-SWITCHING-MIB::daiIntfErrorDisabledTrap,,,,,,Trap is sent once an interface is error disabled by DAI when the incoming packet rate exceeded configured rate limit during a burst-interval.
.1.3.6.1.4.1.4526.10.1.1,FASTPATH-SWITCHING-MIB::agentInfoGroup,,,,,,
.1.3.6.1.4.1.4526.10.1.1.1,FASTPATH-SWITCHING-MIB::agentInventoryGroup,,,,,,
.1.3.6.1.4.1.4526.10.1.1.1.1,FASTPATH-SWITCHING-MIB::agentInventorySysDescription,OCTET,read-only,,current,,The switch's Inventory system description. 
.1.3.6.1.4.1.4526.10.1.1.1.2,FASTPATH-SWITCHING-MIB::agentInventoryMachineType,OCTET,read-only,,current,,Type of the Machine used in the Switch 
.1.3.6.1.4.1.4526.10.1.1.1.3,FASTPATH-SWITCHING-MIB::agentInventoryMachineModel,OCTET,read-only,,current,,The switch's Machine Model. 
.1.3.6.1.4.1.4526.10.1.1.1.4,FASTPATH-SWITCHING-MIB::agentInventorySerialNumber,OCTET,read-only,,current,,Serial number of the switch.
.1.3.6.1.4.1.4526.10.1.1.1.5,FASTPATH-SWITCHING-MIB::agentInventoryFRUNumber,OCTET,read-only,,current,,FRU Number of the switch
.1.3.6.1.4.1.4526.10.1.1.1.6,FASTPATH-SWITCHING-MIB::agentInventoryMaintenanceLevel,OCTET,read-only,,current,,The switch's Inventory Maintenance Level
.1.3.6.1.4.1.4526.10.1.1.1.7,FASTPATH-SWITCHING-MIB::agentInventoryPartNumber,OCTET,read-only,,current,,The switch's Inventory Part Number
.1.3.6.1.4.1.4526.10.1.1.1.8,FASTPATH-SWITCHING-MIB::agentInventoryManufacturer,OCTET,read-only,,current,,Name of the Manufacturer of this unit
.1.3.6.1.4.1.4526.10.1.1.1.9,FASTPATH-SWITCHING-MIB::agentInventoryBurnedInMacAddress,OCTET,read-only,,current,,Burned-In MAC Address
.1.3.6.1.4.1.4526.10.1.1.1.10,FASTPATH-SWITCHING-MIB::agentInventoryOperatingSystem,OCTET,read-only,,current,,Operating System running on this unit
.1.3.6.1.4.1.4526.10.1.1.1.11,FASTPATH-SWITCHING-MIB::agentInventoryNetworkProcessingDevice,OCTET,read-only,,current,,Network Processing Device for this unit
.1.3.6.1.4.1.4526.10.1.1.1.12,FASTPATH-SWITCHING-MIB::agentInventoryAdditionalPackages,OCTET,read-only,,current,,Lists additional functional packages available on this unit.
.1.3.6.1.4.1.4526.10.1.1.1.13,FASTPATH-SWITCHING-MIB::agentInventorySoftwareVersion,OCTET,read-only,,current,,Lists the version of software loaded on this unit.
.1.3.6.1.4.1.4526.10.1.1.1.14,FASTPATH-SWITCHING-MIB::agentInventoryHardwareVersion,OCTET,read-only,,current,,Lists the version of hardware of this unit. This is a platform dependant string.
.1.3.6.1.4.1.4526.10.1.1.2,FASTPATH-SWITCHING-MIB::agentTrapLogGroup,,,,,,
.1.3.6.1.4.1.4526.10.1.1.2.1,FASTPATH-SWITCHING-MIB::agentTrapLogTotal,Integer32,read-only,,current,,The total number of traps sent since last reset.
.1.3.6.1.4.1.4526.10.1.1.2.3,FASTPATH-SWITCHING-MIB::agentTrapLogTotalSinceLastViewed,Integer32,read-only,,current,,The number of traps sent since last viewed.
.1.3.6.1.4.1.4526.10.1.1.2.4,FASTPATH-SWITCHING-MIB::agentTrapLogTable,,not-accessible,,current,,Agent Trap Log
.1.3.6.1.4.1.4526.10.1.1.2.4.1,FASTPATH-SWITCHING-MIB::agentTrapLogEntry,,not-accessible,agentTrapLogIndex,current,,Agent trap log entry
.1.3.6.1.4.1.4526.10.1.1.2.4.1.1,FASTPATH-SWITCHING-MIB::agentTrapLogIndex,Integer32,read-only,,current,,Unique index of trap entry
.1.3.6.1.4.1.4526.10.1.1.2.4.1.2,FASTPATH-SWITCHING-MIB::agentTrapLogSystemTime,OCTET,read-only,,current,,System uptime when trap was sent. This entry shows how long the system has been up when the trap occurred.
.1.3.6.1.4.1.4526.10.1.1.2.4.1.3,FASTPATH-SWITCHING-MIB::agentTrapLogTrap,OCTET,read-only,,current,,Description of the trap sent.
.1.3.6.1.4.1.4526.10.1.1.3,FASTPATH-SWITCHING-MIB::agentSupportedMibTable,,not-accessible,,current,,Supported MIB table
.1.3.6.1.4.1.4526.10.1.1.3.1,FASTPATH-SWITCHING-MIB::agentSupportedMibEntry,,not-accessible,agentSupportedMibIndex,current,,Supported MIB entry
.1.3.6.1.4.1.4526.10.1.1.3.1.1,FASTPATH-SWITCHING-MIB::agentSupportedMibIndex,Integer32,read-only,,current,,Unique index of the Supported MIB entry
.1.3.6.1.4.1.4526.10.1.1.3.1.2,FASTPATH-SWITCHING-MIB::agentSupportedMibName,OCTET,read-only,,current,,The name of the MIB (RFC or IEEE) that is supported.
.1.3.6.1.4.1.4526.10.1.1.3.1.3,FASTPATH-SWITCHING-MIB::agentSupportedMibDescription,OCTET,read-only,,current,,Description of the MIB (RFC or IEEE) that is supported.
.1.3.6.1.4.1.4526.10.1.1.4,FASTPATH-SWITCHING-MIB::agentSwitchCpuMBufGroup,,,,,,
.1.3.6.1.4.1.4526.10.1.1.4.1,FASTPATH-SWITCHING-MIB::agentSwitchCpuMBufSize,Integer32,read-only,,current,, The total number of mbuffers size.
.1.3.6.1.4.1.4526.10.1.1.4.2,FASTPATH-SWITCHING-MIB::agentSwitchCpuMBufFree,Integer32,read-only,,current,, The total number of mbuffers Free.
.1.3.6.1.4.1.4526.10.1.1.4.3,FASTPATH-SWITCHING-MIB::agentSwitchCpuMBufRxUsed,Integer32,read-only,,current,, The total number of Rx Mbuffers used.
.1.3.6.1.4.1.4526.10.1.1.4.4,FASTPATH-SWITCHING-MIB::agentSwitchCpuMBufRxNormAllocAttempts,Integer32,read-only,,current,, The total number of Rx Mbuffers allocation attempts used with normal prioriry.
.1.3.6.1.4.1.4526.10.1.1.4.5,FASTPATH-SWITCHING-MIB::agentSwitchCpuMBufRxNormAllocFailures,Integer32,read-only,,current,, The total number of Rx Mbuffers allocations failed used with normal prioriry.
.1.3.6.1.4.1.4526.10.1.1.4.6,FASTPATH-SWITCHING-MIB::agentSwitchCpuMBufRxMid2AllocAttempts,Integer32,read-only,,current,, The total number of Rx Mbuffers allocation attempts used with Mid2 prioriry.
.1.3.6.1.4.1.4526.10.1.1.4.7,FASTPATH-SWITCHING-MIB::agentSwitchCpuMBufRxMid2AllocFailures,Integer32,read-only,,current,, The total number of Rx Mbuffers allocations failed used with Mid2 prioriry.
.1.3.6.1.4.1.4526.10.1.1.4.8,FASTPATH-SWITCHING-MIB::agentSwitchCpuMBufRxMid1AllocAttempts,Integer32,read-only,,current,, The total number of Rx Mbuffers allocation attempts used with Mid1 prioriry.
.1.3.6.1.4.1.4526.10.1.1.4.9,FASTPATH-SWITCHING-MIB::agentSwitchCpuMBufRxMid1AllocFailures,Integer32,read-only,,current,, The total number of Rx Mbuffers allocations failed used with Mid1 prioriry.
.1.3.6.1.4.1.4526.10.1.1.4.10,FASTPATH-SWITCHING-MIB::agentSwitchCpuMBufRxHighAllocAttempts,Integer32,read-only,,current,, The total number of Rx Mbuffers allocation attempts used with High prioriry.
.1.3.6.1.4.1.4526.10.1.1.4.11,FASTPATH-SWITCHING-MIB::agentSwitchCpuMBufRxHighAllocFailures,Integer32,read-only,,current,, The total number of Rx Mbuffers allocations failed used with High prioriry.
.1.3.6.1.4.1.4526.10.1.1.4.12,FASTPATH-SWITCHING-MIB::agentSwitchCpuMBufTxAllocAttempts,Integer32,read-only,,current,, The total number of Tx Mbuffers allocation attempts .
.1.3.6.1.4.1.4526.10.1.1.4.13,FASTPATH-SWITCHING-MIB::agentSwitchCpuMBufTxAllocFailures,Integer32,read-only,,current,, The total number of Tx Mbuffers allocations failed .
.1.3.6.1.4.1.4526.10.1.1.5,FASTPATH-SWITCHING-MIB::agentSwitchCpuProcessGroup,,,,,,
.1.3.6.1.4.1.4526.10.1.1.5.1,FASTPATH-SWITCHING-MIB::agentSwitchCpuProcessMemFree,Integer32,read-only,,current,, The total memory Freed for utilization.
.1.3.6.1.4.1.4526.10.1.1.5.2,FASTPATH-SWITCHING-MIB::agentSwitchCpuProcessMemAvailable,Integer32,read-only,,current,, The total Memory allocated for the tasks.
.1.3.6.1.4.1.4526.10.1.1.5.3,FASTPATH-SWITCHING-MIB::agentSwitchCpuProcessTable,,not-accessible,,current,, A table of Task and cpu utilization.
.1.3.6.1.4.1.4526.10.1.1.5.3.1,FASTPATH-SWITCHING-MIB::agentSwitchCpuProcessEntry,,not-accessible,agentSwitchCpuProcessIndex,current,,Represents entry for a Task Table.
.1.3.6.1.4.1.4526.10.1.1.5.3.1.1,FASTPATH-SWITCHING-MIB::agentSwitchCpuProcessIndex,Integer32,read-only,,current,,Unique index of process table
.1.3.6.1.4.1.4526.10.1.1.5.3.1.2,FASTPATH-SWITCHING-MIB::agentSwitchCpuProcessName,OCTET,read-only,,current,,Name of the process
.1.3.6.1.4.1.4526.10.1.1.5.3.1.3,FASTPATH-SWITCHING-MIB::agentSwitchCpuProcessPercentageUtilization,OCTET,read-only,,current,,Percentage of CPU Utilized by corresponding task
.1.3.6.1.4.1.4526.10.1.2,FASTPATH-SWITCHING-MIB::agentConfigGroup,,,,,,
.1.3.6.1.4.1.4526.10.1.2.1,FASTPATH-SWITCHING-MIB::agentCLIConfigGroup,,,,,,
.1.3.6.1.4.1.4526.10.1.2.1.1,FASTPATH-SWITCHING-MIB::agentLoginSessionTable,,not-accessible,,current,,A table of the switch's login session
.1.3.6.1.4.1.4526.10.1.2.1.1.1,FASTPATH-SWITCHING-MIB::agentLoginSessionEntry,,not-accessible,agentLoginSessionIndex,current,,Login Session Entry
.1.3.6.1.4.1.4526.10.1.2.1.1.1.1,FASTPATH-SWITCHING-MIB::agentLoginSessionIndex,Integer32,read-only,,current,,Agent Login Session Index of the switch
.1.3.6.1.4.1.4526.10.1.2.1.1.1.2,FASTPATH-SWITCHING-MIB::agentLoginSessionUserName,OCTET,read-only,,current,,Agent Login Session UserName of the switch
.1.3.6.1.4.1.4526.10.1.2.1.1.1.3,FASTPATH-SWITCHING-MIB::agentLoginSessionIPAddress,IpAddress,read-only,,obsolete,,Agent Login Session IP Address of the switch
.1.3.6.1.4.1.4526.10.1.2.1.1.1.4,FASTPATH-SWITCHING-MIB::agentLoginSessionConnectionType,INTEGER,read-only,,current,serial(1):telnet(2):ssh(3):http(4):https(5),Agent Login Session Connection Type of the switch
.1.3.6.1.4.1.4526.10.1.2.1.1.1.5,FASTPATH-SWITCHING-MIB::agentLoginSessionIdleTime,TimeTicks,read-only,,current,,Agent Login Session Idle Time of the switch
.1.3.6.1.4.1.4526.10.1.2.1.1.1.6,FASTPATH-SWITCHING-MIB::agentLoginSessionSessionTime,TimeTicks,read-only,,current,,Agent Login Session Time of the switch
.1.3.6.1.4.1.4526.10.1.2.1.1.1.7,FASTPATH-SWITCHING-MIB::agentLoginSessionStatus,INTEGER,read-write,,current,active(1):notInService(2):notReady(3):createAndGo(4):createAndWait(5):destroy(6),Status of the user. active(1) - This connection is active. destroy(6) - Set to this value to disconnect this user.
.1.3.6.1.4.1.4526.10.1.2.1.1.1.8,FASTPATH-SWITCHING-MIB::agentLoginSessionInetAddressType,INTEGER,read-only,,current,unknown(0):ipv4(1):ipv6(2):ipv4z(3):ipv6z(4):dns(16),Type of address agentLoginSessionInetAddress is returning. Can be either unknown(0), ipv4(1), or ipv6 (2). Will return unknown(0) in the case of a serial login.
.1.3.6.1.4.1.4526.10.1.2.1.1.1.9,FASTPATH-SWITCHING-MIB::agentLoginSessionInetAddress,OCTET,read-only,,current,,Inet Address of the connecting the user is logging in with. Will return a zero-length string in the case of a serial login.
.1.3.6.1.4.1.4526.10.1.2.1.2,FASTPATH-SWITCHING-MIB::agentTelnetConfigGroup,,,,,,
.1.3.6.1.4.1.4526.10.1.2.1.2.1,FASTPATH-SWITCHING-MIB::agentTelnetLoginTimeout,Integer32,read-write,,current,,Telnet login timeout (minutes) Config telnet timeout will set the telnet session timeout value. A session is active as long as the session has not remained idle for the value set. Specify a value from 1 to 160. Note: Changing the timeout value for active sessions does not become effective until the session is reaccessed. Any keystroke will also activate the new timeout duration.
.1.3.6.1.4.1.4526.10.1.2.1.2.2,FASTPATH-SWITCHING-MIB::agentTelnetMaxSessions,Integer32,read-write,,current,,Maximum number of Telnet Sessions Config telnet maxsessions is an integer value from 0 to 5 that specifies the maximum number of telnet sessions that can be established. If the value is 0, no Telnet session can be established. 
.1.3.6.1.4.1.4526.10.1.2.1.2.3,FASTPATH-SWITCHING-MIB::agentTelnetAllowNewMode,INTEGER,read-write,,current,enable(1):disable(2),Allow new telnet sessions (enable or disable) Config telnet disable means that no new Telnet sessions are to be established. Any already established session remains active until the session is ended or an abnormal network error ends it. 
.1.3.6.1.4.1.4526.10.1.2.1.3,FASTPATH-SWITCHING-MIB::agentUserConfigGroup,,,,,,
.1.3.6.1.4.1.4526.10.1.2.1.3.1,FASTPATH-SWITCHING-MIB::agentUserConfigCreate,OCTET,read-write,,current,,Create a new user. When set with a non-empty string, a new user with that name will be created. This object will only return an empty string. This string is limited to alpha-numeric strings (uncluding the '-' and '_' characters).
.1.3.6.1.4.1.4526.10.1.2.1.3.2,FASTPATH-SWITCHING-MIB::agentUserConfigTable,,not-accessible,,current,,User Config Table
.1.3.6.1.4.1.4526.10.1.2.1.3.2.1,FASTPATH-SWITCHING-MIB::agentUserConfigEntry,,not-accessible,agentUserIndex,current,,User Config Entry
.1.3.6.1.4.1.4526.10.1.2.1.3.2.1.1,FASTPATH-SWITCHING-MIB::agentUserIndex,Integer32,not-accessible,,current,,Agent User Config Index
.1.3.6.1.4.1.4526.10.1.2.1.3.2.1.2,FASTPATH-SWITCHING-MIB::agentUserName,OCTET,read-write,,current,,Agent User Name. This string is limited to alpha-numeric strings (including the '-' and '_' characters).
.1.3.6.1.4.1.4526.10.1.2.1.3.2.1.3,FASTPATH-SWITCHING-MIB::agentUserPassword,OCTET,read-write,,current,,Agent User Password This object will return an empty string even if a password is set.
.1.3.6.1.4.1.4526.10.1.2.1.3.2.1.4,FASTPATH-SWITCHING-MIB::agentUserAccessMode,INTEGER,read-only,,current,read(1):write(2),Agent User Access Mode
.1.3.6.1.4.1.4526.10.1.2.1.3.2.1.5,FASTPATH-SWITCHING-MIB::agentUserStatus,INTEGER,read-write,,current,active(1):notInService(2):notReady(3):createAndGo(4):createAndWait(5):destroy(6),Agent User Status. active(1) - This user account is active. destroy(6) - Set to this value to remove this user account.
.1.3.6.1.4.1.4526.10.1.2.1.3.2.1.6,FASTPATH-SWITCHING-MIB::agentUserAuthenticationType,INTEGER,read-write,,current,none(1):hmacmd5(2):hmacsha(3),SNMPv3 User Authentication. The user passsword must be set to a string greater than or equal to 8 characters for this to be set to anything but none(1). none(1) - no authentication used hmacmd5(1) - Use HMAC-MD5 authentication hmacsha(1) - Use HMAC-SHA authentication
.1.3.6.1.4.1.4526.10.1.2.1.3.2.1.7,FASTPATH-SWITCHING-MIB::agentUserEncryptionType,INTEGER,read-write,,current,none(1):des(2),SNMPv3 User Encryption Can not be set to des(2) if agentUserAuthenticationType is set to none(1). none(1) - no encryption used des(2) - DES encryption used
.1.3.6.1.4.1.4526.10.1.2.1.3.2.1.8,FASTPATH-SWITCHING-MIB::agentUserEncryptionPassword,OCTET,read-write,,current,,SNMPv3 User Encryption Password This object will return an empty string even if a password is set. agentUserEncryptionType must be set to des(2) before this object can be configured. This object will return an empty string even if a password is set.
.1.3.6.1.4.1.4526.10.1.2.1.3.2.1.9,FASTPATH-SWITCHING-MIB::agentUserLockoutStatus,INTEGER,read-only,,current,false(0):true(1),Displays whether the user account is locked due to excessive failed login attempts.
.1.3.6.1.4.1.4526.10.1.2.1.3.2.1.10,FASTPATH-SWITCHING-MIB::agentUserPasswordExpireTime,OCTET,read-only,,current,,Date and time when the user's password expires (past or present). Only valid when password aging is enabled.
.1.3.6.1.4.1.4526.10.1.2.1.5,FASTPATH-SWITCHING-MIB::agentSerialGroup,,,,,,
.1.3.6.1.4.1.4526.10.1.2.1.5.1,FASTPATH-SWITCHING-MIB::agentSerialTimeout,Integer32,read-write,,current,,agentSerialTimeout specifies the maximum connect time(in minutes) without console activity. A value of 0 indicates that a console can be connected indefinitely. The time range is 0 to 160. 
.1.3.6.1.4.1.4526.10.1.2.1.5.2,FASTPATH-SWITCHING-MIB::agentSerialBaudrate,INTEGER,read-write,,current,baud-1200(1):baud-2400(2):baud-4800(3):baud-9600(4):baud-19200(5):baud-38400(6):baud-57600(7):baud-115200(8), agentSerialBaudrate specifies the current baud rate at which the serial port will try to connect. The available values are 1200, 2400, 4800, 9600, 19200, 38400,57600, and 115200 baud. 
.1.3.6.1.4.1.4526.10.1.2.1.5.3,FASTPATH-SWITCHING-MIB::agentSerialCharacterSize,Integer32,read-only,,current,,agentSerialCharacterSize specifies the number of bits in a character. The number of bits is always 8.
.1.3.6.1.4.1.4526.10.1.2.1.5.4,FASTPATH-SWITCHING-MIB::agentSerialHWFlowControlMode,INTEGER,read-only,,current,enable(1):disable(2),agentSerialHardwareFlowControl specifies whether hardware flow-control is enabled or disabled. Hardware Flow Control is always disabled.
.1.3.6.1.4.1.4526.10.1.2.1.5.5,FASTPATH-SWITCHING-MIB::agentSerialStopBits,Integer32,read-only,,current,, agentSerialStopBits specifies the number of Stop bits per character. The number of Stop bits is always 1.
.1.3.6.1.4.1.4526.10.1.2.1.5.6,FASTPATH-SWITCHING-MIB::agentSerialParityType,INTEGER,read-only,,current,even(1):odd(2):none(3), agentSerialParityType specifies the Parity Method used on the Serial Port. The Parity Method is always None. 
.1.3.6.1.4.1.4526.10.1.2.1.6,FASTPATH-SWITCHING-MIB::agentPasswordManagementConfigGroup,,,,,,
.1.3.6.1.4.1.4526.10.1.2.1.6.1,FASTPATH-SWITCHING-MIB::agentPasswordManagementMinLength,Integer32,read-write,,current,,Minimum length for user passwords All new local user passwords must be at least this many characters in length. 
.1.3.6.1.4.1.4526.10.1.2.1.6.2,FASTPATH-SWITCHING-MIB::agentPasswordManagementHistory,Integer32,read-write,,current,,The number of previous passwords to store for prevention of password reuse. This ensures that each user does not reuse passwords often. A value of 0 indicates that no previous passwords will be stored. 
.1.3.6.1.4.1.4526.10.1.2.1.6.3,FASTPATH-SWITCHING-MIB::agentPasswordManagementAging,Integer32,read-write,,current,,The maximum time that user passwords are valid, in days, from the time the password is set. Once a password expires, the user will be required to enter a new password following the first login after password expiration. A value of 0 indicates that passwords never expire. 
.1.3.6.1.4.1.4526.10.1.2.1.6.4,FASTPATH-SWITCHING-MIB::agentPasswordManagementLockAttempts,Integer32,read-write,,current,,The number of allowable failed local authentication attempts before the user's account is locked. A value of 0 indicates that user accounts will never be locked. 
.1.3.6.1.4.1.4526.10.1.2.2,FASTPATH-SWITCHING-MIB::agentLagConfigGroup,,,,,,
.1.3.6.1.4.1.4526.10.1.2.2.1,FASTPATH-SWITCHING-MIB::agentLagConfigCreate,OCTET,read-write,,current,,Agent LAG Create. When this object is set with a non-empty string, a new LAG will be created if possible, with the entered string as its name. Get operation on this MIB object returns a null-value, as for the purpose of viewing the LAG name, the user should perform the traversal of agentLagSummaryConfigTable. For this reason the get operation on this object agentLagConfigCreate becomes insignificant.
.1.3.6.1.4.1.4526.10.1.2.2.2,FASTPATH-SWITCHING-MIB::agentLagSummaryConfigTable,,not-accessible,,current,,A summary table of the switch's LAG config entries
.1.3.6.1.4.1.4526.10.1.2.2.2.1,FASTPATH-SWITCHING-MIB::agentLagSummaryConfigEntry,,not-accessible,agentLagSummaryLagIndex,current,,Switch's LAG config entry
.1.3.6.1.4.1.4526.10.1.2.2.2.1.1,FASTPATH-SWITCHING-MIB::agentLagSummaryLagIndex,Integer32,read-only,,current,,Agent LAG IfIndex. This value corresponds with the LAG interface in the ifTable.
.1.3.6.1.4.1.4526.10.1.2.2.2.1.2,FASTPATH-SWITCHING-MIB::agentLagSummaryName,OCTET,read-write,,current,,Agent LAG Name. The associated name of the LAG used during creation.
.1.3.6.1.4.1.4526.10.1.2.2.2.1.3,FASTPATH-SWITCHING-MIB::agentLagSummaryFlushTimer,Integer32,read-write,,obsolete,,Agent LAG FlushTimer.
.1.3.6.1.4.1.4526.10.1.2.2.2.1.4,FASTPATH-SWITCHING-MIB::agentLagSummaryLinkTrap,INTEGER,read-write,,current,enable(1):disable(2),Agent LAG LinkTrap. Configures sending Link Up/Down traps when the LAG interface goes Up or Down.
.1.3.6.1.4.1.4526.10.1.2.2.2.1.5,FASTPATH-SWITCHING-MIB::agentLagSummaryAdminMode,INTEGER,read-write,,current,enable(1):disable(2),Agent LAG AdminMode. Administratively enables or disables this LAG interface.
.1.3.6.1.4.1.4526.10.1.2.2.2.1.6,FASTPATH-SWITCHING-MIB::agentLagSummaryStpMode,INTEGER,read-write,,current,dot1d(1):fast(2):off(3):dot1s(4),Agent LAG StpMode If Dot1d is enabled, the valid values are: dot1d(1), fast(2), and off(3) If Dot1s is enabled, the valid values are: off(3) and dot1s(4)
.1.3.6.1.4.1.4526.10.1.2.2.2.1.7,FASTPATH-SWITCHING-MIB::agentLagSummaryAddPort,Integer32,read-write,,current,,Agent LAG AddPort. Set to a non 0 value to add a port to the LAG. Values correspond to ifIndex values in the ifTable. Note: agentPortType for the port to be added must be full duplex and the same speed as previously added port(s), if any.
.1.3.6.1.4.1.4526.10.1.2.2.2.1.8,FASTPATH-SWITCHING-MIB::agentLagSummaryDeletePort,Integer32,read-write,,current,,Agent LAG DeletePort. Set to a non 0 value to remove a port from the LAG. Values correspond to ifIndex values in the ifTable.
.1.3.6.1.4.1.4526.10.1.2.2.2.1.9,FASTPATH-SWITCHING-MIB::agentLagSummaryStatus,INTEGER,read-write,,current,active(1):notInService(2):notReady(3):createAndGo(4):createAndWait(5):destroy(6),Agent LAG Status. active(1) - This LAG is enabled. destroy(6) - Set to this value to remove the LAG.
.1.3.6.1.4.1.4526.10.1.2.2.2.1.10,FASTPATH-SWITCHING-MIB::agentLagSummaryType,INTEGER,read-only,,current,static(1):dynamic(2),Agent LAG Type. static(1) - This LAG is staticly maintained. dynamic(2) - This LAG is dynamicly maintained.
.1.3.6.1.4.1.4526.10.1.2.2.2.1.11,FASTPATH-SWITCHING-MIB::agentLagSummaryStaticCapability,INTEGER,read-write,,current,enable(1):disable(2),Agent LAG Static Capability enable(1) - Static capability is enabled for this LAG interface disable(2) - Static capability is disabled for this LAG interface
.1.3.6.1.4.1.4526.10.1.2.2.2.1.12,FASTPATH-SWITCHING-MIB::agentLagSummaryHashOption,Integer32,read-write,,current,,LAG Hashing Option. Valid values correspond to 1 (=Source MAC, VLAN, EtherType, and incoming port associated with the packet) 2 (=Destination MAC, VLAN, EtherType, and incoming port associated with the packet) 3 (=Source/Destination MAC, VLAN, EtherType, and incoming port associated with the packet) 4 (=Source IP and Source TCP/UDP fields of the packet) 5 (=Destination IP and Destination TCP/UDP Port fields of the packet) 6 (=Source/Destination IP and source/destination TCP/UDP Port fields of the packet) Support for particular options may vary by device.
.1.3.6.1.4.1.4526.10.1.2.2.3,FASTPATH-SWITCHING-MIB::agentLagDetailedConfigTable,,not-accessible,,current,,A detailed table of the switch's LAG config entries
.1.3.6.1.4.1.4526.10.1.2.2.3.1,FASTPATH-SWITCHING-MIB::agentLagDetailedConfigEntry,,not-accessible,agentLagDetailedLagIndex:agentLagDetailedIfIndex,current,,Switch's LAG config entry
.1.3.6.1.4.1.4526.10.1.2.2.3.1.1,FASTPATH-SWITCHING-MIB::agentLagDetailedLagIndex,Integer32,read-only,,current,,LAG index
.1.3.6.1.4.1.4526.10.1.2.2.3.1.2,FASTPATH-SWITCHING-MIB::agentLagDetailedIfIndex,Integer32,read-only,,current,,LAG port index
.1.3.6.1.4.1.4526.10.1.2.2.3.1.3,FASTPATH-SWITCHING-MIB::agentLagDetailedPortSpeed,OBJECT,read-only,,current,,LAG port speed. See agentPortType for a description and list of valid values.
.1.3.6.1.4.1.4526.10.1.2.2.3.1.4,FASTPATH-SWITCHING-MIB::agentLagDetailedPortStatus,INTEGER,read-only,,current,active(1):inactive(2),LAG port status. active(1) - Actively participating in the LAG. inactive(2) - Not participating in the LAG.
.1.3.6.1.4.1.4526.10.1.2.2.4,FASTPATH-SWITCHING-MIB::agentLagConfigStaticCapability,INTEGER,read-write,,obsolete,enable(1):disable(2),Agent LAG Static Capability. Configures whether Static LAGs are supported on this device.
.1.3.6.1.4.1.4526.10.1.2.2.5,FASTPATH-SWITCHING-MIB::agentLagConfigGroupHashOption,Integer32,read-write,,current,,LAG Hashing Option. Valid values correspond to 1 (=Source MAC, VLAN, EtherType, and incoming port associated with the packet) 2 (=Destination MAC, VLAN, EtherType, and incoming port associated with the packet) 3 (=Source/Destination MAC, VLAN, EtherType, and incoming port associated with the packet) 4 (=Source IP and Source TCP/UDP fields of the packet) 5 (=Destination IP and Destination TCP/UDP Port fields of the packet) 6 (=Source/Destination IP and source/destination TCP/UDP Port fields of the packet) Support for particular options may vary by device. In BCM 53115 device only options 1 to 3 are support and only MAC address associated with the packet is used. 
.1.3.6.1.4.1.4526.10.1.2.3,FASTPATH-SWITCHING-MIB::agentNetworkConfigGroup,,,,,,
.1.3.6.1.4.1.4526.10.1.2.3.1,FASTPATH-SWITCHING-MIB::agentNetworkIPAddress,IpAddress,read-write,,current,,The switch's network ip address
.1.3.6.1.4.1.4526.10.1.2.3.2,FASTPATH-SWITCHING-MIB::agentNetworkSubnetMask,IpAddress,read-write,,current,,The switch's network subnet mask
.1.3.6.1.4.1.4526.10.1.2.3.3,FASTPATH-SWITCHING-MIB::agentNetworkDefaultGateway,IpAddress,read-write,,current,,The switch's network default gateway
.1.3.6.1.4.1.4526.10.1.2.3.4,FASTPATH-SWITCHING-MIB::agentNetworkBurnedInMacAddress,OCTET,read-only,,current,,The switch's network Burned-In MAC address
.1.3.6.1.4.1.4526.10.1.2.3.5,FASTPATH-SWITCHING-MIB::agentNetworkLocalAdminMacAddress,OCTET,read-write,,current,,The switch's network locally administered MAC address
.1.3.6.1.4.1.4526.10.1.2.3.6,FASTPATH-SWITCHING-MIB::agentNetworkMacAddressType,INTEGER,read-only,,current,burned-in(1):local(2),The switch's network Mac Address Type
.1.3.6.1.4.1.4526.10.1.2.3.7,FASTPATH-SWITCHING-MIB::agentNetworkConfigProtocol,INTEGER,read-write,,current,none(1):bootp(2):dhcp(3),The switch's network config protocol
.1.3.6.1.4.1.4526.10.1.2.3.8,FASTPATH-SWITCHING-MIB::agentNetworkWebMode,INTEGER,read-write,,obsolete,enable(1):disable(2),The switch's network config protocol on next bootup This object has been obsoleted by agentHTTPWebMode.
.1.3.6.1.4.1.4526.10.1.2.3.9,FASTPATH-SWITCHING-MIB::agentNetworkJavaMode,INTEGER,read-write,,obsolete,enable(1):disable(2),Configures the use of the Java interface through the Web. This object has been obsoleted by agentHTTPJavaMode.
.1.3.6.1.4.1.4526.10.1.2.3.10,FASTPATH-SWITCHING-MIB::agentNetworkMgmtVlan,Integer32,read-write,,current,,The VLAN ID through which the switch can be managed using the agentNetworkIPAddress
.1.3.6.1.4.1.4526.10.1.2.3.11,FASTPATH-SWITCHING-MIB::agentNetworkIpv6AdminMode,INTEGER,read-write,,current,enabled(1):disabled(2),The network port IPv6 administrative state
.1.3.6.1.4.1.4526.10.1.2.3.12,FASTPATH-SWITCHING-MIB::agentNetworkIpv6Gateway,OCTET,read-write,,current,,The network port IPv6 Gateway Address
.1.3.6.1.4.1.4526.10.1.2.3.13,FASTPATH-SWITCHING-MIB::agentNetworkIpv6AddrTable,,not-accessible,,current,,The list of IPv6 address prefixes for the network port.
.1.3.6.1.4.1.4526.10.1.2.3.13.1,FASTPATH-SWITCHING-MIB::agentNetworkIpv6AddrEntry,,not-accessible,agentNetworkIpv6AddrPrefix,current,,An interface entry containing objects of a particular IPv6 address prefix
.1.3.6.1.4.1.4526.10.1.2.3.13.1.1,FASTPATH-SWITCHING-MIB::agentNetworkIpv6AddrPrefix,OCTET,not-accessible,,current,,The service port IPv6 Address Prefix
.1.3.6.1.4.1.4526.10.1.2.3.13.1.2,FASTPATH-SWITCHING-MIB::agentNetworkIpv6AddrPrefixLength,INTEGER,read-create,,current,,The service port IPv6 Address Prefix Length
.1.3.6.1.4.1.4526.10.1.2.3.13.1.3,FASTPATH-SWITCHING-MIB::agentNetworkIpv6AddrEuiFlag,INTEGER,read-create,,current,enabled(1):disabled(2),The service port IPv6 Eui Flag
.1.3.6.1.4.1.4526.10.1.2.3.13.1.4,FASTPATH-SWITCHING-MIB::agentNetworkIpv6AddrStatus,INTEGER,read-create,,current,active(1):notInService(2):notReady(3):createAndGo(4):createAndWait(5):destroy(6),
.1.3.6.1.4.1.4526.10.1.2.3.14,FASTPATH-SWITCHING-MIB::agentNetworkIpv6AddressAutoConfig,INTEGER,read-write,,current,enable(1):disable(2),The ipv6 address autoconfig allows the device to perform IPv6 stateless address auto-configuration to discover prefixes on the link and then to add the eui-64 based addresses to the network interface.
.1.3.6.1.4.1.4526.10.1.2.3.15,FASTPATH-SWITCHING-MIB::agentNetworkIpv6ConfigProtocol,INTEGER,read-write,,current,none(1):dhcp(2),The switch's network IPv6 config protocol
.1.3.6.1.4.1.4526.10.1.2.3.16,FASTPATH-SWITCHING-MIB::agentNetworkDhcp6ClientDuid,OCTET,read-only,,current,, The DHCPv6 Client unique DUID. This value cannot be modified
.1.3.6.1.4.1.4526.10.1.2.3.17,FASTPATH-SWITCHING-MIB::agentNetworkStatsGroup,,,,,,
.1.3.6.1.4.1.4526.10.1.2.3.17.1,FASTPATH-SWITCHING-MIB::agentNetworkDhcp6ADVERTISEMessagesReceived,Counter32,read-only,,current,, The no. of DHCPv6 messages of type ADVERTISE that have been received by the DHCPv6 client on the network port.
.1.3.6.1.4.1.4526.10.1.2.3.17.2,FASTPATH-SWITCHING-MIB::agentNetworkDhcp6REPLYMessagesReceived,Counter32,read-only,,current,, The no. of DHCPv6 messages of type REPLY that have been received by the DHCPv6 client on the network port.
.1.3.6.1.4.1.4526.10.1.2.3.17.3,FASTPATH-SWITCHING-MIB::agentNetworkDhcp6ADVERTISEMessagesDiscarded,Counter32,read-only,,current,, The no. of DHCPv6 messages of type ADVERTISE that have been discarded by the DHCPv6 client on the network port.
.1.3.6.1.4.1.4526.10.1.2.3.17.4,FASTPATH-SWITCHING-MIB::agentNetworkDhcp6REPLYMessagesDiscarded,Counter32,read-only,,current,, The no. of DHCPv6 messages of type REPLY that have been discarded by the DHCPv6 client on the network port.
.1.3.6.1.4.1.4526.10.1.2.3.17.5,FASTPATH-SWITCHING-MIB::agentNetworkDhcp6MalformedMessagesReceived,Counter32,read-only,,current,, The no. of DHCPv6 messages received malformed by the DHCPv6 client on the network port.
.1.3.6.1.4.1.4526.10.1.2.3.17.6,FASTPATH-SWITCHING-MIB::agentNetworkDhcp6SOLICITMessagesSent,Counter32,read-only,,current,, The no. of DHCPv6 messages of type SOLICIT that have been sent by the DHCPv6 client on the network port.
.1.3.6.1.4.1.4526.10.1.2.3.17.7,FASTPATH-SWITCHING-MIB::agentNetworkDhcp6REQUESTMessagesSent,Counter32,read-only,,current,, The no. of DHCPv6 messages of type REQUEST that have been sent by the DHCPv6 client on the network port.
.1.3.6.1.4.1.4526.10.1.2.3.17.8,FASTPATH-SWITCHING-MIB::agentNetworkDhcp6RENEWMessagesSent,Counter32,read-only,,current,, The no. of DHCPv6 messages of type RENEW that have been sent by the DHCPv6 client on the network port.
.1.3.6.1.4.1.4526.10.1.2.3.17.9,FASTPATH-SWITCHING-MIB::agentNetworkDhcp6REBINDMessagesSent,Counter32,read-only,,current,, The no. of DHCPv6 messages of type REBIND that have been sent by the DHCPv6 client on the network port.
.1.3.6.1.4.1.4526.10.1.2.3.17.10,FASTPATH-SWITCHING-MIB::agentNetworkDhcp6RELEASEMessagesSent,Counter32,read-only,,current,, The no. of DHCPv6 messages of type RELEASE that have been sent by the DHCPv6 client on the network port.
.1.3.6.1.4.1.4526.10.1.2.3.17.11,FASTPATH-SWITCHING-MIB::agentNetworkDhcp6StatsReset,INTEGER,read-write,,current,none(0):reset(1),Clear the DHCPv6 Client statistics on the network port. A value of reset(1) is used to reset the statistics. A read on this object will always return the value none(0). The value none(0) cannot be forcibly set by the administrator.
.1.3.6.1.4.1.4526.10.1.2.4,FASTPATH-SWITCHING-MIB::agentServicePortConfigGroup,,,,,,
.1.3.6.1.4.1.4526.10.1.2.4.1,FASTPATH-SWITCHING-MIB::agentServicePortIPAddress,IpAddress,read-write,,current,,The switch's ServicePort ip address
.1.3.6.1.4.1.4526.10.1.2.4.2,FASTPATH-SWITCHING-MIB::agentServicePortSubnetMask,IpAddress,read-write,,current,,The switch's ServicePort subnet mask
.1.3.6.1.4.1.4526.10.1.2.4.3,FASTPATH-SWITCHING-MIB::agentServicePortDefaultGateway,IpAddress,read-write,,current,,The switch's ServicePort default gateway
.1.3.6.1.4.1.4526.10.1.2.4.4,FASTPATH-SWITCHING-MIB::agentServicePortBurnedInMacAddress,OCTET,read-only,,current,,The switch's ServicePort Burned-In MAC address
.1.3.6.1.4.1.4526.10.1.2.4.5,FASTPATH-SWITCHING-MIB::agentServicePortConfigProtocol,INTEGER,read-write,,current,none(1):bootp(2):dhcp(3),The switch's ServicePort config protocol
.1.3.6.1.4.1.4526.10.1.2.4.6,FASTPATH-SWITCHING-MIB::agentServicePortIpv6AdminMode,INTEGER,read-write,,current,enabled(1):disabled(2),The service port IPv6 administrative state
.1.3.6.1.4.1.4526.10.1.2.4.7,FASTPATH-SWITCHING-MIB::agentServicePortIpv6Gateway,OCTET,read-write,,current,,The service port IPv6 Gateway Address
.1.3.6.1.4.1.4526.10.1.2.4.8,FASTPATH-SWITCHING-MIB::agentServicePortIpv6AddrTable,,not-accessible,,current,,The list of IPv6 address prefixes for the service port.
.1.3.6.1.4.1.4526.10.1.2.4.8.1,FASTPATH-SWITCHING-MIB::agentServicePortIpv6AddrEntry,,not-accessible,agentServicePortIpv6AddrPrefix,current,,An interface entry containing objects of a particular IPv6 address prefix
.1.3.6.1.4.1.4526.10.1.2.4.8.1.1,FASTPATH-SWITCHING-MIB::agentServicePortIpv6AddrPrefix,OCTET,not-accessible,,current,,The service port IPv6 Address Prefix
.1.3.6.1.4.1.4526.10.1.2.4.8.1.2,FASTPATH-SWITCHING-MIB::agentServicePortIpv6AddrPrefixLength,INTEGER,read-create,,current,,The service port IPv6 Address Prefix Length
.1.3.6.1.4.1.4526.10.1.2.4.8.1.3,FASTPATH-SWITCHING-MIB::agentServicePortIpv6AddrEuiFlag,INTEGER,read-create,,current,enabled(1):disabled(2),The service port IPv6 Eui Flag
.1.3.6.1.4.1.4526.10.1.2.4.8.1.4,FASTPATH-SWITCHING-MIB::agentServicePortIpv6AddrStatus,INTEGER,read-create,,current,active(1):notInService(2):notReady(3):createAndGo(4):createAndWait(5):destroy(6),
.1.3.6.1.4.1.4526.10.1.2.4.9,FASTPATH-SWITCHING-MIB::agentServicePortIpv6AddressAutoConfig,INTEGER,read-write,,current,enable(1):disable(2),The ipv6 address autoconfig allows the device to perform IPv6 stateless address auto-configuration to discover prefixes on the link and then to add the eui-64 based addresses to the serviceport interface.
.1.3.6.1.4.1.4526.10.1.2.4.10,FASTPATH-SWITCHING-MIB::agentServicePortIpv6ConfigProtocol,INTEGER,read-write,,current,none(1):dhcp(2),The Service Port.s IPv6 protocol configured on the switch.
.1.3.6.1.4.1.4526.10.1.2.4.11,FASTPATH-SWITCHING-MIB::agentServicePortDhcp6ClientDuid,OCTET,read-only,,current,, The DHCPv6 Client unique DUID. This value cannot be modified
.1.3.6.1.4.1.4526.10.1.2.4.12,FASTPATH-SWITCHING-MIB::agentServicePortStatsGroup,,,,,,
.1.3.6.1.4.1.4526.10.1.2.4.12.1,FASTPATH-SWITCHING-MIB::agentServicePortDhcp6ADVERTISEMessagesReceived,Counter32,read-only,,current,, The no. of DHCPv6 messages of type ADVERTISE that have been received by the DHCPv6 client on the service port.
.1.3.6.1.4.1.4526.10.1.2.4.12.2,FASTPATH-SWITCHING-MIB::agentServicePortDhcp6REPLYMessagesReceived,Counter32,read-only,,current,, The no. of DHCPv6 messages of type REPLY that have been received by the DHCPv6 client on the service port.
.1.3.6.1.4.1.4526.10.1.2.4.12.3,FASTPATH-SWITCHING-MIB::agentServicePortDhcp6ADVERTISEMessagesDiscarded,Counter32,read-only,,current,, The no. of DHCPv6 messages of type ADVERTISE that have been discarded by the DHCPv6 client on the service port.
.1.3.6.1.4.1.4526.10.1.2.4.12.4,FASTPATH-SWITCHING-MIB::agentServicePortDhcp6REPLYMessagesDiscarded,Counter32,read-only,,current,, The no. of DHCPv6 messages of type REPLY that have been discarded by the DHCPv6 client on the service port.
.1.3.6.1.4.1.4526.10.1.2.4.12.5,FASTPATH-SWITCHING-MIB::agentServicePortDhcp6MalformedMessagesReceived,Counter32,read-only,,current,, The no. of DHCPv6 messages received malformed by the DHCPv6 client on the service port.
.1.3.6.1.4.1.4526.10.1.2.4.12.6,FASTPATH-SWITCHING-MIB::agentServicePortDhcp6SOLICITMessagesSent,Counter32,read-only,,current,, The no. of DHCPv6 messages of type SOLICIT that have been sent by the DHCPv6 client on the service port.
.1.3.6.1.4.1.4526.10.1.2.4.12.7,FASTPATH-SWITCHING-MIB::agentServicePortDhcp6REQUESTMessagesSent,Counter32,read-only,,current,, The no. of DHCPv6 messages of type REQUEST that have been sent by the DHCPv6 client on the service port.
.1.3.6.1.4.1.4526.10.1.2.4.12.8,FASTPATH-SWITCHING-MIB::agentServicePortDhcp6RENEWMessagesSent,Counter32,read-only,,current,, The no. of DHCPv6 messages of type RENEW that have been sent by the DHCPv6 client on the service port.
.1.3.6.1.4.1.4526.10.1.2.4.12.9,FASTPATH-SWITCHING-MIB::agentServicePortDhcp6REBINDMessagesSent,Counter32,read-only,,current,, The no. of DHCPv6 messages of type REBIND that have been sent by the DHCPv6 client on the service port.
.1.3.6.1.4.1.4526.10.1.2.4.12.10,FASTPATH-SWITCHING-MIB::agentServicePortDhcp6RELEASEMessagesSent,Counter32,read-only,,current,, The no. of DHCPv6 messages of type RELEASE that have been sent by the DHCPv6 client on the service port.
.1.3.6.1.4.1.4526.10.1.2.4.12.11,FASTPATH-SWITCHING-MIB::agentServicePortDhcp6StatsReset,INTEGER,read-write,,current,none(0):reset(1),Clear the DHCPv6 Client statistics on the service port. A value of reset(1) is used to reset the statistics. A read on this object will always return the value none(0). The value none(0) cannot be forcibly set by the administrator.
.1.3.6.1.4.1.4526.10.1.2.5,FASTPATH-SWITCHING-MIB::agentDhcpClientOptionsConfigGroup,,,,,,
.1.3.6.1.4.1.4526.10.1.2.5.1,FASTPATH-SWITCHING-MIB::agentVendorClassOptionConfigGroup,,,,,,
.1.3.6.1.4.1.4526.10.1.2.5.1.1,FASTPATH-SWITCHING-MIB::agentDhcpClientVendorClassIdMode,INTEGER,read-write,,current,true(1):false(2),This object indicates whether DHCP Vendor Classifier Id Option (60) is enabled for DHCP Network Client. If this object is set to 'true', DHCP Vendor Classifier Id mode is enabled globally. If this object is set to 'false', DHCP Vendor Classifier Id mode is disabled globally.
.1.3.6.1.4.1.4526.10.1.2.5.1.2,FASTPATH-SWITCHING-MIB::agentDhcpClientVendorClassIdString,OCTET,read-write,,current,,When this object is set with a non-empty string, the DHCP Vendor Classifier Id Option (60) string is enabled for DHCP Network Client.
.1.3.6.1.4.1.4526.10.1.2.6,FASTPATH-SWITCHING-MIB::agentSnmpConfigGroup,,,,,,
.1.3.6.1.4.1.4526.10.1.2.6.1,FASTPATH-SWITCHING-MIB::agentSnmpCommunityCreate,OCTET,read-write,,current,,Creates a new SNMP Community entry. Defaults: IPAddress 0.0.0.0 IpMask 0.0.0.0 AccessMode read-only Status config
.1.3.6.1.4.1.4526.10.1.2.6.2,FASTPATH-SWITCHING-MIB::agentSnmpCommunityConfigTable,,not-accessible,,current,,A table of the switch's SNMP Config entries
.1.3.6.1.4.1.4526.10.1.2.6.2.1,FASTPATH-SWITCHING-MIB::agentSnmpCommunityConfigEntry,,not-accessible,agentSnmpCommunityIndex,current,,Switch's SNMP Config entry
.1.3.6.1.4.1.4526.10.1.2.6.2.1.1,FASTPATH-SWITCHING-MIB::agentSnmpCommunityIndex,Integer32,read-only,,current,,The switch's Snmp Community Index
.1.3.6.1.4.1.4526.10.1.2.6.2.1.2,FASTPATH-SWITCHING-MIB::agentSnmpCommunityName,OCTET,read-write,,current,,The switch's Snmp Community Name This name identifies each SNMP community; the name can be up to 16 characters, and it is case-sensitive. Community names in the SNMP community must be unique. If you make multiple entries using the same community name, the first entry is kept and processed and all duplicate entries are ignored. 
.1.3.6.1.4.1.4526.10.1.2.6.2.1.3,FASTPATH-SWITCHING-MIB::agentSnmpCommunityIPAddress,IpAddress,read-write,,current,,The switch's Snmp Community IP Address Client IP Address - This attribute is an IP address (or portion thereof) from which this device will accept SNMP packets with the associated community. The requesting entity's IP address is logical-ANDed with the Client IP Mask and the result must match the Client IP Address. Note: If the Client IP Mask is set to 0.0.0.0, a Client IP Address of 0.0.0.0 matches all IP addresses. 
.1.3.6.1.4.1.4526.10.1.2.6.2.1.4,FASTPATH-SWITCHING-MIB::agentSnmpCommunityIPMask,IpAddress,read-write,,current,,The switch's Snmp Community IP Mask Client IP Mask - This attribute is a mask to be logical-ANDed with the requesting entity's IP address before comparison with the Client IP Address. If the result matches with Client IP Address then the address is an authenticated IP address. For example, if the Client IP Address is 9.47.128.0 and the corresponding Client IP Mask is 255.255.255.0, a range of incoming IP addresses would match, that is, the incoming IP addresses could be a value in the following range: 9.47.128.0 to 9.47.128.255. To have a specific IP address be the only authenticated IP address, set the Client IP Address to the required IP address and set the Client IP Mask to 255.255.255.255. 
.1.3.6.1.4.1.4526.10.1.2.6.2.1.5,FASTPATH-SWITCHING-MIB::agentSnmpCommunityAccessMode,INTEGER,read-write,,current,,The switch's Snmp Community Access Mode Access Mode - This value can be read-only or read/write. A community with a read-only access allows for switch information to be displayed. A community with a read/write access allows for configuration changes to be made and for information to be displayed. 
.1.3.6.1.4.1.4526.10.1.2.6.2.1.6,FASTPATH-SWITCHING-MIB::agentSnmpCommunityStatus,INTEGER,read-write,,current,active(1):notInService(2):config(3):destroy(4),The switch's Snmp Community Status. active(1) - This community is active, allowing SNMP managers associated with this community to manage the switch according to its access right. notInService(2) - This community is not active; no SNMP requests using this community will be accepted. In this case the SNMP manager associated with this community cannot manage the switch until the Status is changed back to active(1). config(3) - The community Status must be set to this value in order to configure it. When creating a new community entry, initial Status will be set to this value. destroy(4) - Set to this value to remove the community from the agent.
.1.3.6.1.4.1.4526.10.1.2.6.3,FASTPATH-SWITCHING-MIB::agentSnmpTrapReceiverCreate,OCTET,read-write,,current,,Creates a new trap receiver entry. Defaults: IPAddress 0.0.0.0 status config
.1.3.6.1.4.1.4526.10.1.2.6.4,FASTPATH-SWITCHING-MIB::agentSnmpTrapReceiverConfigTable,,not-accessible,,current,,Trap messages are sent across a network to an SNMP Network Manager. These messages alert the manager to events occurring within the switch or on the network. Up to six simultaneous trap receivers are supported. 
.1.3.6.1.4.1.4526.10.1.2.6.4.1,FASTPATH-SWITCHING-MIB::agentSnmpTrapReceiverConfigEntry,,not-accessible,agentSnmpTrapReceiverIndex,current,,Switch's Snmp Trace Receiver Config entry
.1.3.6.1.4.1.4526.10.1.2.6.4.1.1,FASTPATH-SWITCHING-MIB::agentSnmpTrapReceiverIndex,Integer32,read-only,,current,,The switch's Snmp Trap Receiver Index
.1.3.6.1.4.1.4526.10.1.2.6.4.1.2,FASTPATH-SWITCHING-MIB::agentSnmpTrapReceiverCommunityName,OCTET,read-write,,current,,The switch's Snmp Trap Receiver Community Name. This is the SNMP community name of the remote network manager; the name can be up to 16 characters, and is case-sensitive. 
.1.3.6.1.4.1.4526.10.1.2.6.4.1.3,FASTPATH-SWITCHING-MIB::agentSnmpTrapReceiverIPAddress,IpAddress,read-write,,current,,IP Address - Each IP address parameter is four integer numbers. The numbers range from 0 to 255. 
.1.3.6.1.4.1.4526.10.1.2.6.4.1.4,FASTPATH-SWITCHING-MIB::agentSnmpTrapReceiverStatus,INTEGER,read-write,,current,active(1):notInService(2):config(3):destroy(4),The switch's Snmp Trap Reciever Status. active(1) - This trap receiver is active, allowing SNMP Traps to be sent to this receiver. notInService(2) - This trap reciever is not active; no SNMP Traps will be sent to this reciever until it's set back to active(1). config(3) - The trap reciever Status must be set to this value in order to configure it. When creating a new trap receiver entry, the Status will initially be set to this value. Note: agentSnmpTrapReceiverIPAddress must be set to non-zero before changing to active(1) or notInService(2). destroy(4) - Set to this value to remove the trap receiver entry from the agent.
.1.3.6.1.4.1.4526.10.1.2.6.4.1.5,FASTPATH-SWITCHING-MIB::agentSnmpTrapReceiverVersion,INTEGER,read-write,,current,snmpv1(1):snmpv2c(2),The version of trap sent to this Reciever. snmpv1(1) - This will send a SNMPv1 trap. snmpv2c(2) - This will send a SNMPv2c trap.
.1.3.6.1.4.1.4526.10.1.2.6.4.1.6,FASTPATH-SWITCHING-MIB::agentSnmpTrapReceiverIpv6Address,OCTET,read-write,,current,,IPv6 Address for SNMP receiver.
.1.3.6.1.4.1.4526.10.1.2.6.5,FASTPATH-SWITCHING-MIB::agentSnmpTrapFlagsConfigGroup,,,,,,
.1.3.6.1.4.1.4526.10.1.2.6.5.1,FASTPATH-SWITCHING-MIB::agentSnmpAuthenticationTrapFlag,INTEGER,read-write,,current,enable(1):disable(2),Authentication Flag - Enable/Disable authentication Flag.
.1.3.6.1.4.1.4526.10.1.2.6.5.2,FASTPATH-SWITCHING-MIB::agentSnmpLinkUpDownTrapFlag,INTEGER,read-write,,current,enable(1):disable(2),Link Up/Down Flag - Enable/Disable Link Up/Link Down traps for the entire switch. When set to Enable, the Link Up/Down traps will be sent only if the Link Trap flag setting associated with the port (Port Configuration Menu) is set to Enable. 
.1.3.6.1.4.1.4526.10.1.2.6.5.3,FASTPATH-SWITCHING-MIB::agentSnmpMultipleUsersTrapFlag,INTEGER,read-write,,current,enable(1):disable(2),Multiple Users Flag - Enable/Disable Multiple User traps. When the value is set to Enable, a Multiple User Trap is sent whenever someone logs in to the terminal interface (EIA 232 or Telnet) and there is already an existing terminal interface session. 
.1.3.6.1.4.1.4526.10.1.2.6.5.4,FASTPATH-SWITCHING-MIB::agentSnmpSpanningTreeTrapFlag,INTEGER,read-write,,current,enable(1):disable(2),Spanning Tree Flag - This flag enables the sending of new root traps and topology change notification traps.
.1.3.6.1.4.1.4526.10.1.2.6.5.5,FASTPATH-SWITCHING-MIB::agentSnmpBroadcastStormTrapFlag,INTEGER,read-write,,obsolete,enable(1):disable(2),Broadcast Storm Flag - This flag enables or disables the broadcast storm trap. You must also enable Broadcast Storm Recovery Mode (see the Switch Configuration Menu). When this value is set to Enable and Broadcast Storm Recovery mode is set to Enable, the Broadcast Storm Start/End traps are sent when the switch enters and leaves Broadcast Storm Recovery. 
.1.3.6.1.4.1.4526.10.1.2.7,FASTPATH-SWITCHING-MIB::agentSpanningTreeConfigGroup,,,,,,
.1.3.6.1.4.1.4526.10.1.2.7.1,FASTPATH-SWITCHING-MIB::agentSpanningTreeMode,INTEGER,read-write,,obsolete,enable(1):disable(2),The switch's Spanning Tree Switch Status. This functionality is now  handled by agentStpAdminMode
.1.3.6.1.4.1.4526.10.1.2.8,FASTPATH-SWITCHING-MIB::agentSwitchConfigGroup,,,,,,
.1.3.6.1.4.1.4526.10.1.2.8.3,FASTPATH-SWITCHING-MIB::agentSwitchSnoopingQuerierGroup,,,,,,
.1.3.6.1.4.1.4526.10.1.2.8.3.1,FASTPATH-SWITCHING-MIB::agentSwitchSnoopingQuerierCfgTable,,not-accessible,,current,,A table of the IGMP/MLD Snooping Querier Global configuration entries.
.1.3.6.1.4.1.4526.10.1.2.8.3.1.1,FASTPATH-SWITCHING-MIB::agentSwitchSnoopingQuerierCfgEntry,,not-accessible,agentSwitchSnoopingProtocol,current,,Represents entry for Snooping Querier Configuration.
.1.3.6.1.4.1.4526.10.1.2.8.3.1.1.1,FASTPATH-SWITCHING-MIB::agentSwitchSnoopingQuerierAdminMode,INTEGER,read-write,,current,enable(1):disable(2),This enables or disables Snooping Querier on the system. 
.1.3.6.1.4.1.4526.10.1.2.8.3.1.1.2,FASTPATH-SWITCHING-MIB::agentSwitchSnoopingQuerierVersion,Integer32,read-write,,current,,This specifies the multicast protocol versions that are supported by the system.
.1.3.6.1.4.1.4526.10.1.2.8.3.1.1.3,FASTPATH-SWITCHING-MIB::agentSwitchSnoopingQuerierAddress,OCTET,read-write,,current,,This specifies the default source ip address to be used while generating general queries.
.1.3.6.1.4.1.4526.10.1.2.8.3.1.1.4,FASTPATH-SWITCHING-MIB::agentSwitchSnoopingQuerierQueryInterval,Integer32,read-write,,current,,This specified the timer interval after which the system generates general queries.
.1.3.6.1.4.1.4526.10.1.2.8.3.1.1.5,FASTPATH-SWITCHING-MIB::agentSwitchSnoopingQuerierExpiryInterval,Integer32,read-write,,current,,This specified the timer interval after which the detected other querier information is no longer valid.
.1.3.6.1.4.1.4526.10.1.2.8.3.2,FASTPATH-SWITCHING-MIB::agentSwitchSnoopingQuerierVlanTable,,not-accessible,,current,,A table of the Snooping Querier Vlan configuration entries.
.1.3.6.1.4.1.4526.10.1.2.8.3.2.1,FASTPATH-SWITCHING-MIB::agentSwitchSnoopingQuerierVlanEntry,,not-accessible,dot1qVlanIndex:agentSwitchSnoopingProtocol,current,,Represents entry for a Snooping Querier configurable Vlan.
.1.3.6.1.4.1.4526.10.1.2.8.3.2.1.1,FASTPATH-SWITCHING-MIB::agentSwitchSnoopingQuerierVlanAdminMode,INTEGER,read-write,,current,disable(0):enable(1),This enables or disables Snooping Querier on a selected Vlan interface.
.1.3.6.1.4.1.4526.10.1.2.8.3.2.1.2,FASTPATH-SWITCHING-MIB::agentSwitchSnoopingQuerierVlanOperMode,INTEGER,read-only,,current,disabled(0):querier(1):non-querier(2),This specifies the current state of the Snooping Querier on a selected vlan interface
.1.3.6.1.4.1.4526.10.1.2.8.3.2.1.3,FASTPATH-SWITCHING-MIB::agentSwitchSnoopingQuerierElectionParticipateMode,INTEGER,read-write,,current,disable(0):enable(1),This enables or disables the Snooping Querier Election Participation mode. When enabled snooping querier switch will participate in querier election up on discovering another querier in the specified vlan. When disabled, up on discovering another querier, snooping querier moves to non-querier state.
.1.3.6.1.4.1.4526.10.1.2.8.3.2.1.4,FASTPATH-SWITCHING-MIB::agentSwitchSnoopingQuerierVlanAddress,OCTET,read-write,,current,,This specifies the default source ip address to be used while generating general queries on the specified vlan.
.1.3.6.1.4.1.4526.10.1.2.8.3.2.1.5,FASTPATH-SWITCHING-MIB::agentSwitchSnoopingQuerierOperVersion,Integer32,read-only,,current,,This specifies the multicast protocol version that is currently being used by the snooping switch for the specified vlan while generating query messages.
.1.3.6.1.4.1.4526.10.1.2.8.3.2.1.6,FASTPATH-SWITCHING-MIB::agentSwitchSnoopingQuerierOperMaxResponseTime,Integer32,read-only,,current,,The amount of time in seconds a switch will wait after sending a query on the selected vlan because it did not receive a report for a particular group in the interface participating in the vlan. This object is valid only when agentSwitchSnoopingQuerierOperVersion object is valid.
.1.3.6.1.4.1.4526.10.1.2.8.3.2.1.7,FASTPATH-SWITCHING-MIB::agentSwitchSnoopingQuerierLastQuerierAddress,OCTET,read-only,,current,,This specifies the last querier's ip address for the specified vlan. It represents the detected other multicast querier in the vlan. 
.1.3.6.1.4.1.4526.10.1.2.8.3.2.1.8,FASTPATH-SWITCHING-MIB::agentSwitchSnoopingQuerierLastQuerierVersion,Integer32,read-only,,current,,This specifies the multicast protocol version that is currently being used by the detected other multicast querier for the specified vlan.
.1.3.6.1.4.1.4526.10.1.2.8.4,FASTPATH-SWITCHING-MIB::agentSwitchAddressAgingTimeoutTable,,not-accessible,,current,,The switch's address aging timeout table
.1.3.6.1.4.1.4526.10.1.2.8.4.1,FASTPATH-SWITCHING-MIB::agentSwitchAddressAgingTimeoutEntry,,not-accessible,dot1qFdbId,current,,Aging information about a specific Filtering Database.
.1.3.6.1.4.1.4526.10.1.2.8.4.1.1,FASTPATH-SWITCHING-MIB::agentSwitchAddressAgingTimeout,Integer32,read-write,,current,,The FDB entry's address aging timeout (in seconds)
.1.3.6.1.4.1.4526.10.1.2.8.5,FASTPATH-SWITCHING-MIB::agentSwitchStaticMacFilteringTable,,not-accessible,,current,,The switch's static Mac filtering table
.1.3.6.1.4.1.4526.10.1.2.8.5.1,FASTPATH-SWITCHING-MIB::agentSwitchStaticMacFilteringEntry,,not-accessible,agentSwitchStaticMacFilteringVlanId:agentSwitchStaticMacFilteringAddress,current,,Per-port ingress/egress filter configuration based on VLAN Id and MAC address.
.1.3.6.1.4.1.4526.10.1.2.8.5.1.1,FASTPATH-SWITCHING-MIB::agentSwitchStaticMacFilteringVlanId,Integer32,read-only,,current,,The Static MAC Filter Vlan Id
.1.3.6.1.4.1.4526.10.1.2.8.5.1.2,FASTPATH-SWITCHING-MIB::agentSwitchStaticMacFilteringAddress,OCTET,read-only,,current,,The Static MAC Filter MAC address
.1.3.6.1.4.1.4526.10.1.2.8.5.1.3,FASTPATH-SWITCHING-MIB::agentSwitchStaticMacFilteringSourcePortMask,OCTET,read-write,,current,,The Static MAC Filter source port mask. When setting this value, the system will ignore configuration for ports not between the first and last valid ports. Configuration of any port numbers between this range that are not valid ports return a failure message, but will still apply configuration for valid ports. To obtain port numbers from interface numbers, use the objects agentPortDot1dBasePort and agentPortIfIndex in the agentPortConfigTable table.
.1.3.6.1.4.1.4526.10.1.2.8.5.1.4,FASTPATH-SWITCHING-MIB::agentSwitchStaticMacFilteringDestPortMask,OCTET,read-write,,current,,The Static MAC Filter destination port mask. When setting this value, the system will ignore configuration for ports not between the first and last valid ports. Configuration of any port numbers between this range that are not valid ports return a failure message, but will still apply configuration for valid ports. To obtain port numbers from interface numbers, use the objects agentPortDot1dBasePort and agentPortIfIndex in the agentPortConfigTable table. Configuring destination port mask for a unicast MAC filter is not supported on some platforms.
.1.3.6.1.4.1.4526.10.1.2.8.5.1.5,FASTPATH-SWITCHING-MIB::agentSwitchStaticMacFilteringStatus,INTEGER,read-create,,current,active(1):notInService(2):notReady(3):createAndGo(4):createAndWait(5):destroy(6),The Static MAC Filter status. Supported values: active(1) - valid entry createAndGo(4) - used to create a new entry destroy(6) - removes the entry
.1.3.6.1.4.1.4526.10.1.2.8.6,FASTPATH-SWITCHING-MIB::agentSwitchSnoopingGroup,,,,,,
.1.3.6.1.4.1.4526.10.1.2.8.6.1,FASTPATH-SWITCHING-MIB::agentSwitchSnoopingCfgTable,,not-accessible,,current,,A table of the IGMP/MLD Snooping Global configuration entries.
.1.3.6.1.4.1.4526.10.1.2.8.6.1.1,FASTPATH-SWITCHING-MIB::agentSwitchSnoopingCfgEntry,,not-accessible,agentSwitchSnoopingProtocol,current,,Represents entry for Snooping switch Configuration.
.1.3.6.1.4.1.4526.10.1.2.8.6.1.1.1,FASTPATH-SWITCHING-MIB::agentSwitchSnoopingProtocol,INTEGER,read-only,,current,unknown(0):ipv4(1):ipv6(2):ipv4z(3):ipv6z(4):dns(16),The protocol type of network protocol in use.
.1.3.6.1.4.1.4526.10.1.2.8.6.1.1.2,FASTPATH-SWITCHING-MIB::agentSwitchSnoopingAdminMode,INTEGER,read-write,,current,enable(1):disable(2),This enables or disables Snooping on the system. 
.1.3.6.1.4.1.4526.10.1.2.8.6.1.1.3,FASTPATH-SWITCHING-MIB::agentSwitchSnoopingPortMask,OCTET,read-write,,current,,IGMP/MLD Snooping Port Mask. This allows configuration of IGMP/MLD Snooping on selected ports. IGMP Snooping cannot be enabled on an interface that has routing enabled, or is a member of a LAG. If a port which has IGMP Snooping enabled becomes enabled for routing, or is enlisted as a member of a LAG, IGMP Snooping functionality will be disabled on that port. IGMP Snooping functionality will be subsequently be reenabled if routing is disabled or LAG membership is removed from an interface that had previously had IGMP Snooping enabled. To obtain port numbers from interface numbers, use the objects agentPortDot1dBasePort and agentPortIfIndex in the agentPortConfigTable table.
.1.3.6.1.4.1.4526.10.1.2.8.6.1.1.4,FASTPATH-SWITCHING-MIB::agentSwitchSnoopingMulticastControlFramesProcessed,Counter32,read-only,,current,,Multicast Control Frames Processed by CPU. The number of multicast control frames that have been processed by the CPU.
.1.3.6.1.4.1.4526.10.1.2.8.7,FASTPATH-SWITCHING-MIB::agentSwitchSnoopingIntfGroup,,,,,,
.1.3.6.1.4.1.4526.10.1.2.8.7.1,FASTPATH-SWITCHING-MIB::agentSwitchSnoopingIntfTable,,not-accessible,,current,,A table of the IGMP Snooping Interface configuration entries.
.1.3.6.1.4.1.4526.10.1.2.8.7.1.1,FASTPATH-SWITCHING-MIB::agentSwitchSnoopingIntfEntry,,not-accessible,ifIndex:agentSwitchSnoopingProtocol,current,,Represents entry for a IGMP Snooping Interface.
.1.3.6.1.4.1.4526.10.1.2.8.7.1.1.1,FASTPATH-SWITCHING-MIB::agentSwitchSnoopingIntfIndex,Unsigned32,read-only,,current,,The port number to be selected. Each port maps to an interface.
.1.3.6.1.4.1.4526.10.1.2.8.7.1.1.2,FASTPATH-SWITCHING-MIB::agentSwitchSnoopingIntfAdminMode,INTEGER,read-write,,current,enable(1):disable(2),This enables or disables IGMP Snooping on a selected interface.
.1.3.6.1.4.1.4526.10.1.2.8.7.1.1.3,FASTPATH-SWITCHING-MIB::agentSwitchSnoopingIntfGroupMembershipInterval,Integer32,read-write,,current,,The amount of time in seconds that a switch will wait for a report from a particular group on the selected interface before deleting the interface from the entry. This value must be greater than agentSwitchIGMPSnoopingIntfMaxResponseTime.
.1.3.6.1.4.1.4526.10.1.2.8.7.1.1.4,FASTPATH-SWITCHING-MIB::agentSwitchSnoopingIntfMaxResponseTime,Integer32,read-write,,current,,The amount of time in seconds a switch will wait after sending a query on the selected interface because it did not receive a report for a particular group in that interface. This value must be less than agentSwitchIGMPSnoopingIntfGroupMembershipInterval.
.1.3.6.1.4.1.4526.10.1.2.8.7.1.1.5,FASTPATH-SWITCHING-MIB::agentSwitchSnoopingIntfMRPExpirationTime,Integer32,read-write,,current,,The amount of time in seconds that a switch will wait for a query to be received on the selected interface before the interface is removed from the list of interfaces with multicast routers attached.
.1.3.6.1.4.1.4526.10.1.2.8.7.1.1.6,FASTPATH-SWITCHING-MIB::agentSwitchSnoopingIntfFastLeaveAdminMode,INTEGER,read-write,,current,enable(1):disable(2),This enables or disables IGMP Snooping on the selected interface.
.1.3.6.1.4.1.4526.10.1.2.8.7.1.1.7,FASTPATH-SWITCHING-MIB::agentSwitchSnoopingIntfMulticastRouterMode,INTEGER,read-write,,current,enable(1):disable(2),This enables or disables Multicast Routing on the selected interface.
.1.3.6.1.4.1.4526.10.1.2.8.7.1.1.8,FASTPATH-SWITCHING-MIB::agentSwitchSnoopingIntfVlanIDs,OCTET,read-only,,current,,This field lists all the VlanIDs which include the selected interface.
.1.3.6.1.4.1.4526.10.1.2.8.8,FASTPATH-SWITCHING-MIB::agentSwitchSnoopingVlanGroup,,,,,,
.1.3.6.1.4.1.4526.10.1.2.8.8.1,FASTPATH-SWITCHING-MIB::agentSwitchSnoopingVlanTable,,not-accessible,,current,,A table of the IGMP Snooping Vlan configuration entries.
.1.3.6.1.4.1.4526.10.1.2.8.8.1.1,FASTPATH-SWITCHING-MIB::agentSwitchSnoopingVlanEntry,,not-accessible,dot1qVlanIndex:agentSwitchSnoopingProtocol,current,,Represents entry for a IGMP Snooping Vlan.
.1.3.6.1.4.1.4526.10.1.2.8.8.1.1.1,FASTPATH-SWITCHING-MIB::agentSwitchSnoopingVlanAdminMode,INTEGER,read-write,,current,disable(0):enable(1),This enables or disables IGMP Snooping on a selected Vlan interface.
.1.3.6.1.4.1.4526.10.1.2.8.8.1.1.2,FASTPATH-SWITCHING-MIB::agentSwitchSnoopingVlanGroupMembershipInterval,Integer32,read-write,,current,,The amount of time in seconds that a switch will wait for a report from a particular group on the selected vlan before deleting the interface participating in the vlan from the entry. This value must be greater than agentSwitchIGMPSnoopingIntfMaxResponseTime.
.1.3.6.1.4.1.4526.10.1.2.8.8.1.1.3,FASTPATH-SWITCHING-MIB::agentSwitchSnoopingVlanMaxResponseTime,Integer32,read-write,,current,,The amount of time in seconds a switch will wait after sending a query on the selected vlan because it did not receive a report for a particular group in the interface participating in the vlan. This value must be less than agentSwitchIGMPSnoopingIntfGroupMembershipInterval.
.1.3.6.1.4.1.4526.10.1.2.8.8.1.1.4,FASTPATH-SWITCHING-MIB::agentSwitchSnoopingVlanFastLeaveAdminMode,INTEGER,read-write,,current,disable(0):enable(1),This enables or disables IGMP Snooping on the selected vlan.
.1.3.6.1.4.1.4526.10.1.2.8.8.1.1.5,FASTPATH-SWITCHING-MIB::agentSwitchSnoopingVlanMRPExpirationTime,Integer32,read-write,,current,,The amount of time in seconds that a switch will wait for a query to be received on the selected interface participating in the vlan before the interface is removed from the list of interfaces with multicast routers attached. This parameter is configurable only for exisiting Vlans.
.1.3.6.1.4.1.4526.10.1.2.8.9,FASTPATH-SWITCHING-MIB::agentSwitchVlanStaticMrouterGroup,,,,,,
.1.3.6.1.4.1.4526.10.1.2.8.9.1,FASTPATH-SWITCHING-MIB::agentSwitchVlanStaticMrouterTable,,not-accessible,,current,,A table of the IGMP Static Mrouter Configuration parameters.
.1.3.6.1.4.1.4526.10.1.2.8.9.1.1,FASTPATH-SWITCHING-MIB::agentSwitchVlanStaticMrouterEntry,,not-accessible,ifIndex:dot1qVlanIndex:agentSwitchSnoopingProtocol,current,,Represents entry for a IGMP Static Mrouter.
.1.3.6.1.4.1.4526.10.1.2.8.9.1.1.1,FASTPATH-SWITCHING-MIB::agentSwitchVlanStaticMrouterAdminMode,INTEGER,read-write,,current,disable(0):enable(1),This enables or disables IGMP Mrouter on a per-interface per-vlan basis.
.1.3.6.1.4.1.4526.10.1.2.8.10,FASTPATH-SWITCHING-MIB::agentSwitchMFDBGroup,,,,,,
.1.3.6.1.4.1.4526.10.1.2.8.10.1,FASTPATH-SWITCHING-MIB::agentSwitchMFDBTable,,not-accessible,,current,,The Multicast Forwarding Database table
.1.3.6.1.4.1.4526.10.1.2.8.10.1.1,FASTPATH-SWITCHING-MIB::agentSwitchMFDBEntry,,not-accessible,agentSwitchMFDBVlanId:agentSwitchMFDBMacAddress:agentSwitchMFDBProtocolType,current,,Contains Forwarding and Filtering information per Vlan Index, MAC Address, and Component User.
.1.3.6.1.4.1.4526.10.1.2.8.10.1.1.1,FASTPATH-SWITCHING-MIB::agentSwitchMFDBVlanId,Unsigned32,read-only,,current,,Vlan Index for which this entry is associated with.
.1.3.6.1.4.1.4526.10.1.2.8.10.1.1.2,FASTPATH-SWITCHING-MIB::agentSwitchMFDBMacAddress,OCTET,read-only,,current,,A multicast MAC address for which the switch has forwarding and or filtering information.
.1.3.6.1.4.1.4526.10.1.2.8.10.1.1.3,FASTPATH-SWITCHING-MIB::agentSwitchMFDBProtocolType,INTEGER,read-only,,current,static(1):gmrp(2):igmp(3):mld(4),The component that is responsible for this entry in the Multicast Forwarding Database.
.1.3.6.1.4.1.4526.10.1.2.8.10.1.1.4,FASTPATH-SWITCHING-MIB::agentSwitchMFDBType,INTEGER,read-only,,current,static(1):dynamic(2),This displays the type of the entry. static(1) - Entries configured by the end user dynamic(2) - Entries added as a result of a learning process or protocol
.1.3.6.1.4.1.4526.10.1.2.8.10.1.1.5,FASTPATH-SWITCHING-MIB::agentSwitchMFDBDescription,OCTET,read-only,,current,,Text description of this multicast table entry.
.1.3.6.1.4.1.4526.10.1.2.8.10.1.1.6,FASTPATH-SWITCHING-MIB::agentSwitchMFDBForwardingPortMask,OCTET,read-only,,current,,BitMask indicating which ports this entry indicates should be forwarded. To obtain port numbers from interface numbers, use the objects agentPortDot1dBasePort and agentPortIfIndex in the agentPortConfigTable table.
.1.3.6.1.4.1.4526.10.1.2.8.10.1.1.7,FASTPATH-SWITCHING-MIB::agentSwitchMFDBFilteringPortMask,OCTET,read-only,,current,,BitMask indicating which ports this entry indicates should be filtered. To obtain port numbers from interface numbers, use the objects agentPortDot1dBasePort and agentPortIfIndex in the agentPortConfigTable table.
.1.3.6.1.4.1.4526.10.1.2.8.10.2,FASTPATH-SWITCHING-MIB::agentSwitchMFDBSummaryTable,,not-accessible,,current,,The Multicast Forwarding Database Summary table
.1.3.6.1.4.1.4526.10.1.2.8.10.2.1,FASTPATH-SWITCHING-MIB::agentSwitchMFDBSummaryEntry,,not-accessible,agentSwitchMFDBSummaryVlanId:agentSwitchMFDBSummaryMacAddress,current,,Summarizes the forwarding ports for all components registered for all MFDB table entries with the same Vlan Index and MAC Address.
.1.3.6.1.4.1.4526.10.1.2.8.10.2.1.1,FASTPATH-SWITCHING-MIB::agentSwitchMFDBSummaryVlanId,Unsigned32,read-only,,current,,Vlan Index for which this entry is associated with.
.1.3.6.1.4.1.4526.10.1.2.8.10.2.1.2,FASTPATH-SWITCHING-MIB::agentSwitchMFDBSummaryMacAddress,OCTET,read-only,,current,,A multicast MAC address for which the switch has forwarding and or filtering information.
.1.3.6.1.4.1.4526.10.1.2.8.10.2.1.3,FASTPATH-SWITCHING-MIB::agentSwitchMFDBSummaryForwardingPortMask,OCTET,read-only,,current,,Port Mask indicating which ports this entry indicates should be forwarded. To obtain port numbers from interface numbers, use the objects agentPortDot1dBasePort and agentPortIfIndex in the agentPortConfigTable table.
.1.3.6.1.4.1.4526.10.1.2.8.10.3,FASTPATH-SWITCHING-MIB::agentSwitchMFDBMaxTableEntries,Gauge32,read-only,,current,,This displays the maximum number of entries that can possibly be in the Multicast Forwarding Database table.
.1.3.6.1.4.1.4526.10.1.2.8.10.4,FASTPATH-SWITCHING-MIB::agentSwitchMFDBMostEntriesUsed,Gauge32,read-only,,current,,This displays the largest number of entries that have been present in the Multicast Forwarding Database table. This value is also known as the MFDB high-water mark.
.1.3.6.1.4.1.4526.10.1.2.8.10.5,FASTPATH-SWITCHING-MIB::agentSwitchMFDBCurrentEntries,Gauge32,read-only,,current,,This displays the current number of entries in the Multicast Forwarding Database table.
.1.3.6.1.4.1.4526.10.1.2.8.11,FASTPATH-SWITCHING-MIB::agentSwitchDVlanTagGroup,,,,,,
.1.3.6.1.4.1.4526.10.1.2.8.11.1,FASTPATH-SWITCHING-MIB::agentSwitchDVlanTagEthertype,Integer32,read-write,,current,,Configures the Double Vlan Tag Ethertype for the switch. If this object is supported, ethertype cannot be configured per port.  Commonly used are the Ethertypes for vman tags (34984, or 0x88A8)  and dot1q tags (33024, or 0x8100).
.1.3.6.1.4.1.4526.10.1.2.8.11.2,FASTPATH-SWITCHING-MIB::agentSwitchDVlanTagTable,,not-accessible,,current,,A table of entries specifying the ethertype (TPID) values. This will let the user specify multiple ethertypes globally.
.1.3.6.1.4.1.4526.10.1.2.8.11.2.1,FASTPATH-SWITCHING-MIB::agentSwitchDVlanTagEntry,,not-accessible,agentSwitchDVlanTagTPid,current,,A table entry specifying the ethertype (TPID) values. Commonly used are the Ethertypes for vman tags (34984, or 0x88A8)  and dot1q tags (33024, or 0x8100).
.1.3.6.1.4.1.4526.10.1.2.8.11.2.1.1,FASTPATH-SWITCHING-MIB::agentSwitchDVlanTagTPid,Integer32,not-accessible,,current,,Ethertype value to identify incoming double tagged frames
.1.3.6.1.4.1.4526.10.1.2.8.11.2.1.2,FASTPATH-SWITCHING-MIB::agentSwitchDVlanTagDefaultTPid,INTEGER,read-create,,current,true(1):false(2),Specifies if this TPID is default TPID for the switch or not
.1.3.6.1.4.1.4526.10.1.2.8.11.2.1.3,FASTPATH-SWITCHING-MIB::agentSwitchDVlanTagRowStatus,INTEGER,read-create,,current,active(1):notInService(2):notReady(3):createAndGo(4):createAndWait(5):destroy(6),Row status
.1.3.6.1.4.1.4526.10.1.2.8.11.3,FASTPATH-SWITCHING-MIB::agentSwitchPortDVlanTagTable,,not-accessible,,current,,A table entries specifying the ethertype (TPID) values per port.
.1.3.6.1.4.1.4526.10.1.2.8.11.3.2,FASTPATH-SWITCHING-MIB::agentSwitchPortDVlanTagEntry,,not-accessible,agentSwitchPortDVlanTagInterfaceIfIndex:agentSwitchPortDVlanTagTPid,current,,A table entry specifying the ethertype (TPID) value for a port.
.1.3.6.1.4.1.4526.10.1.2.8.11.3.2.1,FASTPATH-SWITCHING-MIB::agentSwitchPortDVlanTagInterfaceIfIndex,Integer32,not-accessible,,current,,Port Id on to which the Ethertype value is mapped
.1.3.6.1.4.1.4526.10.1.2.8.11.3.2.2,FASTPATH-SWITCHING-MIB::agentSwitchPortDVlanTagTPid,Integer32,not-accessible,,current,,Ethertype value to identify incoming double tagged frames
.1.3.6.1.4.1.4526.10.1.2.8.11.3.2.3,FASTPATH-SWITCHING-MIB::agentSwitchPortDVlanTagMode,INTEGER,read-create,,current,enable(1):disable(2),Controls the Double Vlan Tag mode on this port.
.1.3.6.1.4.1.4526.10.1.2.8.11.3.2.4,FASTPATH-SWITCHING-MIB::agentSwitchPortDVlanTagCustomerId,Integer32,read-create,,current,,Configures the Customer ID for the Double Vlan Tag for this port.
.1.3.6.1.4.1.4526.10.1.2.8.11.3.2.5,FASTPATH-SWITCHING-MIB::agentSwitchPortDVlanTagRowStatus,INTEGER,read-create,,current,active(1):notInService(2):notReady(3):createAndGo(4):createAndWait(5):destroy(6),Row status
.1.3.6.1.4.1.4526.10.1.2.8.12,FASTPATH-SWITCHING-MIB::agentSwitchStormControlGroup,,,,,,
.1.3.6.1.4.1.4526.10.1.2.8.12.1,FASTPATH-SWITCHING-MIB::agentSwitchDot3FlowControlMode,INTEGER,read-write,,current,enable(1):disable(2),Config switchconfig flowcontrol allows you to enable or disable 802.3x flow control for the switch. This value applies to only full-duplex mode ports. 
.1.3.6.1.4.1.4526.10.1.2.8.12.4,FASTPATH-SWITCHING-MIB::agentSwitchBroadcastControlMode,INTEGER,read-write,,current,enable(1):disable(2),The switch config broadcast allows you to enable or disable broadcast storm recovery mode. When you specify Enable for Broadcast Storm Recovery and the broadcast traffic on any Ethernet port exceeds the configured threshold, the switch blocks (discards) the broadcast traffic.
.1.3.6.1.4.1.4526.10.1.2.8.12.5,FASTPATH-SWITCHING-MIB::agentSwitchBroadcastControlThreshold,Unsigned32,read-write,,current,,Configures the broadcast storm recovery threshold for this port as a percentage of port speed or as an absolute pps rate.
.1.3.6.1.4.1.4526.10.1.2.8.12.6,FASTPATH-SWITCHING-MIB::agentSwitchMulticastControlMode,INTEGER,read-write,,current,enable(1):disable(2),The switch config multicast allows you to enable or disable multicast storm recovery mode. When you specify Enable for multicast Storm Recovery and the multicast traffic on any Ethernet port exceeds the configured threshold, the switch blocks (discards) the multicast traffic.
.1.3.6.1.4.1.4526.10.1.2.8.12.7,FASTPATH-SWITCHING-MIB::agentSwitchMulticastControlThreshold,Unsigned32,read-write,,current,,Configures the multicast storm recovery threshold for this port as a percentage of port speed or as an absolute pps rate.
.1.3.6.1.4.1.4526.10.1.2.8.12.8,FASTPATH-SWITCHING-MIB::agentSwitchUnicastControlMode,INTEGER,read-write,,current,enable(1):disable(2),The switch config unicast allows you to enable or disable unicast storm recovery mode. When you specify Enable for unicast Storm Recovery and the unknown unicast traffic on any Ethernet port exceeds the configured threshold, the switch blocks (discards) the unknown unicast traffic.
.1.3.6.1.4.1.4526.10.1.2.8.12.9,FASTPATH-SWITCHING-MIB::agentSwitchUnicastControlThreshold,Unsigned32,read-write,,current,,Configures the unicast storm recovery threshold for this port as a percentage of port speed or as an absolute pps rate.
.1.3.6.1.4.1.4526.10.1.2.8.12.10,FASTPATH-SWITCHING-MIB::agentSwitchBroadcastControlThresholdUnit,INTEGER,read-write,,current,percent(1):pps(2),Configures the units of the threshold value to percentage of port speed or absolute packets per second.
.1.3.6.1.4.1.4526.10.1.2.8.12.11,FASTPATH-SWITCHING-MIB::agentSwitchMulticastControlThresholdUnit,INTEGER,read-write,,current,percent(1):pps(2),Configures the units of the threshold value to percentage of port speed or absolute packets per second.
.1.3.6.1.4.1.4526.10.1.2.8.12.12,FASTPATH-SWITCHING-MIB::agentSwitchUnicastControlThresholdUnit,INTEGER,read-write,,current,percent(1):pps(2),Configures the units of the threshold value to percentage of port speed or absolute packets per second.
.1.3.6.1.4.1.4526.10.1.2.8.13,FASTPATH-SWITCHING-MIB::agentSwitchVlanMacAssociationGroup,,,,,,
.1.3.6.1.4.1.4526.10.1.2.8.13.1,FASTPATH-SWITCHING-MIB::agentSwitchVlanMacAssociationTable,,not-accessible,,current,,The switch's MAC To VLAN association table
.1.3.6.1.4.1.4526.10.1.2.8.13.1.1,FASTPATH-SWITCHING-MIB::agentSwitchVlanMacAssociationEntry,,not-accessible,agentSwitchVlanMacAssociationMacAddress:agentSwitchVlanMacAssociationVlanId,current,,VLAN to be assigned to untagged or priority tagged packets based on MAC address.
.1.3.6.1.4.1.4526.10.1.2.8.13.1.1.1,FASTPATH-SWITCHING-MIB::agentSwitchVlanMacAssociationMacAddress,OCTET,not-accessible,,current,,The Mac address
.1.3.6.1.4.1.4526.10.1.2.8.13.1.1.2,FASTPATH-SWITCHING-MIB::agentSwitchVlanMacAssociationVlanId,Unsigned32,not-accessible,,current,,The VLAN the Mac address assigned to
.1.3.6.1.4.1.4526.10.1.2.8.13.1.1.3,FASTPATH-SWITCHING-MIB::agentSwitchVlanMacAssociationRowStatus,INTEGER,read-create,,current,active(1):notInService(2):notReady(3):createAndGo(4):createAndWait(5):destroy(6),The Mac to VLAN association row status. Supported values: active(1) - valid entry createAndGo(4) - used to create a new entry destroy(6) - removes the entry
.1.3.6.1.4.1.4526.10.1.2.8.18,FASTPATH-SWITCHING-MIB::agentSwitchProtectedPortConfigGroup,,,,,,
.1.3.6.1.4.1.4526.10.1.2.8.18.1,FASTPATH-SWITCHING-MIB::agentSwitchProtectedPortTable,,not-accessible,,current,,The switch's protected port mapping table
.1.3.6.1.4.1.4526.10.1.2.8.18.1.1,FASTPATH-SWITCHING-MIB::agentSwitchProtectedPortEntry,,not-accessible,agentSwitchProtectedPortGroupId,current,,Protected ports assigned to groups.
.1.3.6.1.4.1.4526.10.1.2.8.18.1.1.1,FASTPATH-SWITCHING-MIB::agentSwitchProtectedPortGroupId,Integer32,not-accessible,,current,,The group that this port belongs to
.1.3.6.1.4.1.4526.10.1.2.8.18.1.1.2,FASTPATH-SWITCHING-MIB::agentSwitchProtectedPortGroupName,OCTET,read-write,,current,,The name of the group
.1.3.6.1.4.1.4526.10.1.2.8.18.1.1.3,FASTPATH-SWITCHING-MIB::agentSwitchProtectedPortPortList,OCTET,read-write,,current,,The set of ports that are protected in this group
.1.3.6.1.4.1.4526.10.1.2.8.20,FASTPATH-SWITCHING-MIB::agentSwitchVlanSubnetAssociationGroup,,,,,,
.1.3.6.1.4.1.4526.10.1.2.8.20.1,FASTPATH-SWITCHING-MIB::agentSwitchVlanSubnetAssociationTable,,not-accessible,,current,,The switch's Subnet To VLAN association table
.1.3.6.1.4.1.4526.10.1.2.8.20.1.1,FASTPATH-SWITCHING-MIB::agentSwitchVlanSubnetAssociationEntry,,not-accessible,agentSwitchVlanSubnetAssociationIPAddress:agentSwitchVlanSubnetAssociationSubnetMask:agentSwitchVlanSubnetAssociationVlanId,current,,VLAN to be assigned to untagged or priority tagged packets based on IP address and Subnet Mask.
.1.3.6.1.4.1.4526.10.1.2.8.20.1.1.1,FASTPATH-SWITCHING-MIB::agentSwitchVlanSubnetAssociationIPAddress,IpAddress,not-accessible,,current,,The ip address
.1.3.6.1.4.1.4526.10.1.2.8.20.1.1.2,FASTPATH-SWITCHING-MIB::agentSwitchVlanSubnetAssociationSubnetMask,IpAddress,not-accessible,,current,,The subnet mask
.1.3.6.1.4.1.4526.10.1.2.8.20.1.1.3,FASTPATH-SWITCHING-MIB::agentSwitchVlanSubnetAssociationVlanId,Unsigned32,not-accessible,,current,,The VLAN that the IP address and subnet mask assigned to
.1.3.6.1.4.1.4526.10.1.2.8.20.1.1.4,FASTPATH-SWITCHING-MIB::agentSwitchVlanSubnetAssociationRowStatus,INTEGER,read-create,,current,active(1):notInService(2):notReady(3):createAndGo(4):createAndWait(5):destroy(6),The Subnet to VLAN association row status. Supported values: active(1) - valid entry createAndGo(4) - used to create a new entry destroy(6) - removes the entry
.1.3.6.1.4.1.4526.10.1.2.8.21,FASTPATH-SWITCHING-MIB::agentSwitchPrivateGroupConfigGroup,,,,,,
.1.3.6.1.4.1.4526.10.1.2.8.21.1,FASTPATH-SWITCHING-MIB::agentSwitchPrivateGroupTable,,not-accessible,,current,,The switch's private group mapping table
.1.3.6.1.4.1.4526.10.1.2.8.21.1.1,FASTPATH-SWITCHING-MIB::agentSwitchPrivateGroupEntry,,not-accessible,agentSwitchPrivateGroupId,current,,Private groups assigned to ports.
.1.3.6.1.4.1.4526.10.1.2.8.21.1.1.1,FASTPATH-SWITCHING-MIB::agentSwitchPrivateGroupId,Integer32,not-accessible,,current,,The private group id that port belongs to
.1.3.6.1.4.1.4526.10.1.2.8.21.1.1.2,FASTPATH-SWITCHING-MIB::agentSwitchPrivateGroupName,OCTET,read-create,,current,,The name of the Private group
.1.3.6.1.4.1.4526.10.1.2.8.21.1.1.3,FASTPATH-SWITCHING-MIB::agentSwitchPrivateGroupMode,INTEGER,read-create,,current,isolated(1):community(2),The mode of port in private group is either isloated or community
.1.3.6.1.4.1.4526.10.1.2.8.21.1.1.4,FASTPATH-SWITCHING-MIB::agentSwitchPrivateGroupRowStatus,INTEGER,read-create,,current,active(1):notInService(2):notReady(3):createAndGo(4):createAndWait(5):destroy(6),Private Group VLAN can only be created through multiple variable bindings taking all the objects of of the AgentSwitchPrivateGroupEntry. Supported values: active(1) - valid entry createAndGo(4) - used to create a new entry destroy(6) - removes the entry 
.1.3.6.1.4.1.4526.10.1.2.8.21.2,FASTPATH-SWITCHING-MIB::agentSwitchPrivateGroupPortTable,,not-accessible,,current,,The switch's private group portlist mapping table
.1.3.6.1.4.1.4526.10.1.2.8.21.2.1,FASTPATH-SWITCHING-MIB::agentSwitchPrivateGroupPortEntry,,not-accessible,agentSwitchPrivateGroupPortGroupId,current,,List of ports assigned to private groups.
.1.3.6.1.4.1.4526.10.1.2.8.21.2.1.1,FASTPATH-SWITCHING-MIB::agentSwitchPrivateGroupPortGroupId,Integer32,not-accessible,,current,,The private group id that port belongs to
.1.3.6.1.4.1.4526.10.1.2.8.21.2.1.2,FASTPATH-SWITCHING-MIB::agentSwitchPrivateGroupPortGroupName,OCTET,read-only,,current,,The name of the Private group 
.1.3.6.1.4.1.4526.10.1.2.8.21.2.1.3,FASTPATH-SWITCHING-MIB::agentSwitchPrivateGroupPortPortList,OCTET,read-write,,current,,The list of ports in private group
.1.3.6.1.4.1.4526.10.1.2.8.22,FASTPATH-SWITCHING-MIB::agentDaiConfigGroup,,,,,,
.1.3.6.1.4.1.4526.10.1.2.8.22.1,FASTPATH-SWITCHING-MIB::agentDaiSrcMacValidate,INTEGER,read-write,,current,true(1):false(2),This object indicates whether Sender MAC validation in the ARP packets is enabled. If this object is set to 'true', validation is enabled. If this object is set to 'false', validation is disabled.
.1.3.6.1.4.1.4526.10.1.2.8.22.2,FASTPATH-SWITCHING-MIB::agentDaiDstMacValidate,INTEGER,read-write,,current,true(1):false(2),This object indicates whether Target MAC validation in the ARP Response packets is enabled. If this object is set to 'true', validation is enabled. If this object is set to 'false', validation is disabled.
.1.3.6.1.4.1.4526.10.1.2.8.22.3,FASTPATH-SWITCHING-MIB::agentDaiIPValidate,INTEGER,read-write,,current,true(1):false(2),This object indicates whether IP address validation in the ARP packets is enabled. If this object is set to 'true', validation is enabled. If this object is set to 'false', validation is disabled.
.1.3.6.1.4.1.4526.10.1.2.8.22.4,FASTPATH-SWITCHING-MIB::agentDaiVlanConfigTable,,not-accessible,,current,,A table provides the mechanism to control Dynamic ARP Inspection per VLAN. When a VLAN is created in a device supporting this table, a corresponding entry of this table will be added.
.1.3.6.1.4.1.4526.10.1.2.8.22.4.1,FASTPATH-SWITCHING-MIB::agentDaiVlanConfigEntry,,not-accessible,agentDaiVlanIndex,current,,A row instance contains the configuration for Dynamic ARP Inspection at each existing VLAN.
.1.3.6.1.4.1.4526.10.1.2.8.22.4.1.1,FASTPATH-SWITCHING-MIB::agentDaiVlanIndex,Unsigned32,not-accessible,,current,,This object indicates the VLAN number on which Dynamic ARP Inspection feature is configured.
.1.3.6.1.4.1.4526.10.1.2.8.22.4.1.2,FASTPATH-SWITCHING-MIB::agentDaiVlanDynArpInspEnable,INTEGER,read-write,,current,true(1):false(2),This object indicates whether Dynamic ARP Inspection is enabled in this VLAN. If this object is set to 'true', Dynamic ARP Inspection is enabled. If this object is set to 'false', Dynamic ARP Inspection is disabled.
.1.3.6.1.4.1.4526.10.1.2.8.22.4.1.3,FASTPATH-SWITCHING-MIB::agentDaiVlanLoggingEnable,INTEGER,read-write,,current,true(1):false(2),This object indicates whether the Dynamic ARP Inspection logging is enabled on this VlAN. If this object is set to 'true', Dynamic ARP Inspection logging is enabled. If this object is set to 'false', Dynamic ARP Inspection loging is disabled.
.1.3.6.1.4.1.4526.10.1.2.8.22.4.1.4,FASTPATH-SWITCHING-MIB::agentDaiVlanArpAclName,OCTET,read-write,,current,,This object indicates the ARP ACL name set for this VLAN.
.1.3.6.1.4.1.4526.10.1.2.8.22.4.1.5,FASTPATH-SWITCHING-MIB::agentDaiVlanArpAclStaticFlag,INTEGER,read-write,,current,true(1):false(2),This object indicates whether the ARP ACL set for this VLAN has static flag set. If this object is set to 'true', static flag is enabled. If this object is set to 'false', static flag is disabled.
.1.3.6.1.4.1.4526.10.1.2.8.22.5,FASTPATH-SWITCHING-MIB::agentDaiStatsReset,INTEGER,read-write,,current,none(0):reset(1),Clear the DAI statistics on all vlans. A value of reset(1) is used to reset the statistics. A read on this object will always return the value none(0). The value none(0) cannot be forcibly set by the administrator.
.1.3.6.1.4.1.4526.10.1.2.8.22.6,FASTPATH-SWITCHING-MIB::agentDaiVlanStatsTable,,not-accessible,,current,,A table provides the mechanism to control Dynamic ARP Inspection per VLAN. When a VLAN is created in a device supporting this table, a corresponding entry of this table will be added.
.1.3.6.1.4.1.4526.10.1.2.8.22.6.1,FASTPATH-SWITCHING-MIB::agentDaiVlanStatsEntry,,not-accessible,agentDaiVlanStatsIndex,current,,A row instance contains the Dynamic ARP Inspection statistics per VLAN.
.1.3.6.1.4.1.4526.10.1.2.8.22.6.1.1,FASTPATH-SWITCHING-MIB::agentDaiVlanStatsIndex,Unsigned32,not-accessible,,current,,This object indicates the VLAN number on which Dynamic ARP Inspection statistics are retrieved.
.1.3.6.1.4.1.4526.10.1.2.8.22.6.1.2,FASTPATH-SWITCHING-MIB::agentDaiVlanPktsForwarded,Counter32,read-only,,current,,Number of valid ARP packets forwarded by DAI.
.1.3.6.1.4.1.4526.10.1.2.8.22.6.1.3,FASTPATH-SWITCHING-MIB::agentDaiVlanPktsDropped,Counter32,read-only,,current,,Number of invalid ARP packets dropped by DAI.
.1.3.6.1.4.1.4526.10.1.2.8.22.6.1.4,FASTPATH-SWITCHING-MIB::agentDaiVlanDhcpDrops,Counter32,read-only,,current,,Number of ARP packets that were dropped by DAI as there is no matching DHCP Snooping binding entry found.
.1.3.6.1.4.1.4526.10.1.2.8.22.6.1.5,FASTPATH-SWITCHING-MIB::agentDaiVlanDhcpPermits,Counter32,read-only,,current,,Number of ARP packets that were forwarded by DAI as there is a matching DHCP Snooping binding entry found.
.1.3.6.1.4.1.4526.10.1.2.8.22.6.1.6,FASTPATH-SWITCHING-MIB::agentDaiVlanAclDrops,Counter32,read-only,,current,,Number of ARP packets that were dropped by DAI as there is no matching ARP ACL rule found for this Vlan and the static flag is set on this vlan.
.1.3.6.1.4.1.4526.10.1.2.8.22.6.1.7,FASTPATH-SWITCHING-MIB::agentDaiVlanAclPermits,Counter32,read-only,,current,,Number of ARP packets that were permitted by DAI as there is a matching ARP ACL rule found for this Vlan.
.1.3.6.1.4.1.4526.10.1.2.8.22.6.1.8,FASTPATH-SWITCHING-MIB::agentDaiVlanSrcMacFailures,Counter32,read-only,,current,,Number of ARP packets that were dropped by DAI as the sender mac address in ARP packet didn't match the source mac in ethernet header.
.1.3.6.1.4.1.4526.10.1.2.8.22.6.1.9,FASTPATH-SWITCHING-MIB::agentDaiVlanDstMacFailures,Counter32,read-only,,current,,Number of ARP packets that were dropped by DAI as the target mac address in ARP reply packet didn't match the destination mac in ethernet header.
.1.3.6.1.4.1.4526.10.1.2.8.22.6.1.10,FASTPATH-SWITCHING-MIB::agentDaiVlanIpValidFailures,Counter32,read-only,,current,,Number of ARP packets that were dropped by DAI as the sender IP address in ARP packet or target IP address in ARP reply packet is invalid. Invalid addresses include 0.0.0.0, 255.255.255.255, IP multicast addresses, class E addresses (240.0.0.0/4), loopback addresses (127.0.0.0/8).
.1.3.6.1.4.1.4526.10.1.2.8.22.7,FASTPATH-SWITCHING-MIB::agentDaiIfConfigTable,,not-accessible,,current,,A table provides the mechanism to configure the trust state for Dynamic ARP Inspection purpose at each physical interface capable of this feature.
.1.3.6.1.4.1.4526.10.1.2.8.22.7.1,FASTPATH-SWITCHING-MIB::agentDaiIfConfigEntry,,not-accessible,ifIndex,current,,A row instance contains the configuration for Dynamic ARP Inspection at each physical interface capable of this feature.
.1.3.6.1.4.1.4526.10.1.2.8.22.7.1.1,FASTPATH-SWITCHING-MIB::agentDaiIfTrustEnable,INTEGER,read-write,,current,true(1):false(2),This object indicates whether the interface is trusted for Dynamic ARP Inspection purpose. If this object is set to 'true', the interface is trusted. ARP packets coming to this interface will be forwarded without checking. If this object is set to 'false', the interface is not trusted. ARP packets coming to this interface will be subjected to ARP inspection.
.1.3.6.1.4.1.4526.10.1.2.8.22.7.1.2,FASTPATH-SWITCHING-MIB::agentDaiIfRateLimit,Unsigned32,read-write,,current,,This object indicates rate limit value for Dynamic ARP Inspection purpose. If the incoming rate of ARP packets exceeds the value of this object for consecutively burst interval seconds, ARP packets will be dropped. 
.1.3.6.1.4.1.4526.10.1.2.8.22.7.1.3,FASTPATH-SWITCHING-MIB::agentDaiIfBurstInterval,Unsigned32,read-write,,current,,This object indicates the burst interval value for rate limiting purpose on this interface.
.1.3.6.1.4.1.4526.10.1.2.8.23,FASTPATH-SWITCHING-MIB::agentArpAclGroup,,,,,,
.1.3.6.1.4.1.4526.10.1.2.8.23.1,FASTPATH-SWITCHING-MIB::agentArpAclTable,,not-accessible,,current,,A table of the ARP ACL entries
.1.3.6.1.4.1.4526.10.1.2.8.23.1.1,FASTPATH-SWITCHING-MIB::agentArpAclEntry,,not-accessible,agentArpAclName,current,,Represents entry for an ARP ACL
.1.3.6.1.4.1.4526.10.1.2.8.23.1.1.1,FASTPATH-SWITCHING-MIB::agentArpAclName,OCTET,read-create,,current,,Name of the ARP ACL, which must consist of 1 to 31 alphanumeric characters and uniquely identify this ARP ACL. This object must be set to complete a new ARP ACL row instance.
.1.3.6.1.4.1.4526.10.1.2.8.23.1.1.2,FASTPATH-SWITCHING-MIB::agentArpAclRowStatus,INTEGER,read-create,,current,active(1):notInService(2):notReady(3):createAndGo(4):createAndWait(5):destroy(6),The status of this conceptual row. Entries can not be deleted until all rows in arpAclRuleTable with corresponding values of arpAclIndex have been deleted. active(1) - this ACL instance is active createAndGo(4) - set to this value to create an instance destroy(6) - set to this value to delete an instance
.1.3.6.1.4.1.4526.10.1.2.8.23.2,FASTPATH-SWITCHING-MIB::agentArpAclRuleTable,,not-accessible,,current,,A table of the ARP ACL Rule entries
.1.3.6.1.4.1.4526.10.1.2.8.23.2.1,FASTPATH-SWITCHING-MIB::agentArpAclRuleEntry,,not-accessible,agentArpAclName:agentArpAclRuleMatchSenderIpAddr:agentArpAclRuleMatchSenderMacAddr,current,,Represents entry for a set of ARP ACL-match rules
.1.3.6.1.4.1.4526.10.1.2.8.23.2.1.1,FASTPATH-SWITCHING-MIB::agentArpAclRuleMatchSenderIpAddr,IpAddress,read-create,,current,,Sender IP address match value for the ARP ACL.
.1.3.6.1.4.1.4526.10.1.2.8.23.2.1.2,FASTPATH-SWITCHING-MIB::agentArpAclRuleMatchSenderMacAddr,OCTET,read-create,,current,,Sender MAC address match value for the ARP ACL.
.1.3.6.1.4.1.4526.10.1.2.8.23.2.1.3,FASTPATH-SWITCHING-MIB::agentArpAclRuleRowStatus,INTEGER,read-create,,current,active(1):notInService(2):notReady(3):createAndGo(4):createAndWait(5):destroy(6),The status of this conceptual row. active(1) - this ACL Rule is active createAndGo(4) - set to this value to create an instance destroy(6) - set to this value to delete an instance
.1.3.6.1.4.1.4526.10.1.2.8.24,FASTPATH-SWITCHING-MIB::agentDhcpSnoopingConfigGroup,,,,,,
.1.3.6.1.4.1.4526.10.1.2.8.24.1,FASTPATH-SWITCHING-MIB::agentDhcpSnoopingAdminMode,INTEGER,read-write,,current,true(1):false(2),This object indicates whether DHCP Snooping is enabled globally. If this object is set to 'true',admin mode is enabled globally. If this object is set to 'false',admin mode is disabled globally.
.1.3.6.1.4.1.4526.10.1.2.8.24.2,FASTPATH-SWITCHING-MIB::agentDhcpSnoopingVerifyMac,INTEGER,read-write,,current,true(1):false(2),This object indicates whether source Mac address in the received DHCP Message needs to be verified or not. If this object is set to 'true',verifyMac is enabled globally. If this object is set to 'false',verifyMac is disabled globally.
.1.3.6.1.4.1.4526.10.1.2.8.24.3,FASTPATH-SWITCHING-MIB::agentDhcpSnoopingVlanConfigTable,,not-accessible,,current,,A table provides the mechanism to control DHCP SNOOPING per VLAN. When a VLAN is created in a device supporting this table, a corresponding entry of this table will be added.
.1.3.6.1.4.1.4526.10.1.2.8.24.3.1,FASTPATH-SWITCHING-MIB::agentDhcpSnoopingVlanConfigEntry,,not-accessible,agentDhcpSnoopingVlanIndex,current,,A row instance contains the configuration for DHCP SNOOPING at each existing VLAN.
.1.3.6.1.4.1.4526.10.1.2.8.24.3.1.1,FASTPATH-SWITCHING-MIB::agentDhcpSnoopingVlanIndex,Unsigned32,not-accessible,,current,,This object indicates the VLAN number on which DHCP SNOOPING Inspection feature is configured.
.1.3.6.1.4.1.4526.10.1.2.8.24.3.1.2,FASTPATH-SWITCHING-MIB::agentDhcpSnoopingVlanEnable,INTEGER,read-write,,current,true(1):false(2),This object indicates whether DHCP SNOOPING is enabled in this VLAN. If this object is set to 'true', DHCP SNOOPING is enabled. If this object is set to 'false', DHCP SNOOPING is disabled.
.1.3.6.1.4.1.4526.10.1.2.8.24.4,FASTPATH-SWITCHING-MIB::agentDhcpSnoopingIfConfigTable,,not-accessible,,current,,A table provides the mechanism to configure the trust state for DHCP snooping purpose at each physical interface capable of this feature.
.1.3.6.1.4.1.4526.10.1.2.8.24.4.1,FASTPATH-SWITCHING-MIB::agentDhcpSnoopingIfConfigEntry,,not-accessible,ifIndex,current,,A row instance contains the configuration for DHCP snooping at each physical interface capable of this feature.
.1.3.6.1.4.1.4526.10.1.2.8.24.4.1.1,FASTPATH-SWITCHING-MIB::agentDhcpSnoopingIfTrustEnable,INTEGER,read-write,,current,true(1):false(2),This object indicates whether the interface is trusted for DHCP snooping purpose.
.1.3.6.1.4.1.4526.10.1.2.8.24.4.1.2,FASTPATH-SWITCHING-MIB::agentDhcpSnoopingIfLogEnable,INTEGER,read-write,,current,true(1):false(2),This object indicates whether the Logging needs on DHCP snooping validations or not
.1.3.6.1.4.1.4526.10.1.2.8.24.4.1.3,FASTPATH-SWITCHING-MIB::agentDhcpSnoopingIfRateLimit,Unsigned32,read-write,,current,,This object indicates rate limit value for DHCP Snooping purpose. If the incoming rate of DHCP packets exceeds the value of this object for consecutively burst interval seconds, DHCP packets will be dropped. 
.1.3.6.1.4.1.4526.10.1.2.8.24.4.1.4,FASTPATH-SWITCHING-MIB::agentDhcpSnoopingIfBurstInterval,Unsigned32,read-write,,current,,This object indicates the burst interval value for rate limiting purpose on this interface.
.1.3.6.1.4.1.4526.10.1.2.8.24.5,FASTPATH-SWITCHING-MIB::agentIpsgIfConfigTable,,not-accessible,,current,,A table provides the mechanism to configure the IPSG at each physical interface capable of this feature.
.1.3.6.1.4.1.4526.10.1.2.8.24.5.1,FASTPATH-SWITCHING-MIB::agentIpsgIfConfigEntry,,not-accessible,ifIndex,current,,A row instance contains the configuration for IPSG at each physical interface capable of this feature.
.1.3.6.1.4.1.4526.10.1.2.8.24.5.1.1,FASTPATH-SWITCHING-MIB::agentIpsgIfVerifySource,INTEGER,read-write,,current,true(1):false(2),This object indicates whether the interface is enabled for IPSG to forward the data based up on source Ip address
.1.3.6.1.4.1.4526.10.1.2.8.24.5.1.2,FASTPATH-SWITCHING-MIB::agentIpsgIfPortSecurity,INTEGER,read-write,,current,true(1):false(2),This object indicates whether the interface is enabled for IPSG to forward the data based up on source mac address in fdb table
.1.3.6.1.4.1.4526.10.1.2.8.24.6,FASTPATH-SWITCHING-MIB::agentDhcpSnoopingStatsReset,INTEGER,read-write,,current,none(0):reset(1),Clear the DHCP snooping statistics on all ports. A value of reset(1) is used to reset the statistics. A read on this object will always return the value none(0). The value none(0) cannot be forcibly set by the administrator.
.1.3.6.1.4.1.4526.10.1.2.8.24.7,FASTPATH-SWITCHING-MIB::agentDhcpSnoopingStatsTable,,not-accessible,,current,,A table provides the mechanism for statics of DHCP snooping.
.1.3.6.1.4.1.4526.10.1.2.8.24.7.1,FASTPATH-SWITCHING-MIB::agentDhcpSnoopingStatsEntry,,not-accessible,ifIndex,current,,A row instance contains the DHCP snooping statistics per VLAN.
.1.3.6.1.4.1.4526.10.1.2.8.24.7.1.1,FASTPATH-SWITCHING-MIB::agentDhcpSnoopingMacVerifyFailures,Counter32,read-only,,current,,This object indicates the number of failure verifications of client mac address with source mac address
.1.3.6.1.4.1.4526.10.1.2.8.24.7.1.2,FASTPATH-SWITCHING-MIB::agentDhcpSnoopingInvalidClientMessages,Counter32,read-only,,current,,This object indicates the number of invalid DHCP releases and denay messages
.1.3.6.1.4.1.4526.10.1.2.8.24.7.1.3,FASTPATH-SWITCHING-MIB::agentDhcpSnoopingInvalidServerMessages,Counter32,read-only,,current,,This object indicates the number of invalid DHCP server mesaages
.1.3.6.1.4.1.4526.10.1.2.8.24.8,FASTPATH-SWITCHING-MIB::agentStaticIpsgBindingTable,,not-accessible,,current,,A table of the IPSG static entries
.1.3.6.1.4.1.4526.10.1.2.8.24.8.1,FASTPATH-SWITCHING-MIB::agentStaticIpsgBinding,,not-accessible,agentStaticIpsgBindingIfIndex:agentStaticIpsgBindingVlanId:agentStaticIpsgBindingMacAddr:agentStaticIpsgBindingIpAddr,current,,Represents a binding in IPSG table
.1.3.6.1.4.1.4526.10.1.2.8.24.8.1.1,FASTPATH-SWITCHING-MIB::agentStaticIpsgBindingIfIndex,,read-create,,current,,Interface on which this IPSG binding is going to be added.
.1.3.6.1.4.1.4526.10.1.2.8.24.8.1.2,FASTPATH-SWITCHING-MIB::agentStaticIpsgBindingVlanId,Unsigned32,read-create,,current,, VLAN to whcig this IPSG binding is going to be added.
.1.3.6.1.4.1.4526.10.1.2.8.24.8.1.3,FASTPATH-SWITCHING-MIB::agentStaticIpsgBindingMacAddr,OCTET,read-create,,current,,MAC address match value for the IPSG Binding.
.1.3.6.1.4.1.4526.10.1.2.8.24.8.1.4,FASTPATH-SWITCHING-MIB::agentStaticIpsgBindingIpAddr,IpAddress,read-create,,current,,IP address match value for the IPSG Binding.
.1.3.6.1.4.1.4526.10.1.2.8.24.8.1.5,FASTPATH-SWITCHING-MIB::agentStaticIpsgBindingRowStatus,INTEGER,read-create,,current,active(1):notInService(2):notReady(3):createAndGo(4):createAndWait(5):destroy(6),The status of this conceptual row. active(1) - this IPSG Binding is active createAndGo(4) - set to this value to create an instance destroy(6) - set to this value to delete an instance
.1.3.6.1.4.1.4526.10.1.2.8.24.9,FASTPATH-SWITCHING-MIB::agentDynamicIpsgBindingTable,,not-accessible,,current,,A table of the IPSG dynamic entries
.1.3.6.1.4.1.4526.10.1.2.8.24.9.1,FASTPATH-SWITCHING-MIB::agentDynamicIpsgBinding,,not-accessible,agentDynamicIpsgBindingIfIndex:agentDynamicIpsgBindingVlanId:agentDynamicIpsgBindingMacAddr:agentDynamicIpsgBindingIpAddr,current,,Represents a binding in IPSG table
.1.3.6.1.4.1.4526.10.1.2.8.24.9.1.1,FASTPATH-SWITCHING-MIB::agentDynamicIpsgBindingIfIndex,,read-only,,current,,Interface on which this IPSG binding is added.
.1.3.6.1.4.1.4526.10.1.2.8.24.9.1.2,FASTPATH-SWITCHING-MIB::agentDynamicIpsgBindingVlanId,Unsigned32,read-only,,current,, VLAN to whcig this IPSG binding is going to be added.
.1.3.6.1.4.1.4526.10.1.2.8.24.9.1.3,FASTPATH-SWITCHING-MIB::agentDynamicIpsgBindingMacAddr,OCTET,read-only,,current,,MAC address match value for the IPSG Binding.
.1.3.6.1.4.1.4526.10.1.2.8.24.9.1.4,FASTPATH-SWITCHING-MIB::agentDynamicIpsgBindingIpAddr,IpAddress,read-only,,current,,Sender IP address match value for the IPSG Binding.
.1.3.6.1.4.1.4526.10.1.2.8.24.10,FASTPATH-SWITCHING-MIB::agentStaticDsBindingTable,,not-accessible,,current,,A table of the DHCP SNOOPING static entries
.1.3.6.1.4.1.4526.10.1.2.8.24.10.1,FASTPATH-SWITCHING-MIB::agentStaticDsBinding,,not-accessible,agentStaticDsBindingMacAddr,current,,Represents a binding in DHCP SNOOPING table
.1.3.6.1.4.1.4526.10.1.2.8.24.10.1.1,FASTPATH-SWITCHING-MIB::agentStaticDsBindingIfIndex,,read-create,,current,,Interface on which this DHCP SNOOPING binding is going to be added.
.1.3.6.1.4.1.4526.10.1.2.8.24.10.1.2,FASTPATH-SWITCHING-MIB::agentStaticDsBindingVlanId,Unsigned32,read-create,,current,, VLAN to whcig this DHCP SNOOPING binding is going to be added.
.1.3.6.1.4.1.4526.10.1.2.8.24.10.1.3,FASTPATH-SWITCHING-MIB::agentStaticDsBindingMacAddr,OCTET,read-create,,current,,MAC address match value for the DHCP SNOOPING Binding.
.1.3.6.1.4.1.4526.10.1.2.8.24.10.1.4,FASTPATH-SWITCHING-MIB::agentStaticDsBindingIpAddr,IpAddress,read-create,,current,,IP address match value for the DHCP SNOOPING Binding.
.1.3.6.1.4.1.4526.10.1.2.8.24.10.1.5,FASTPATH-SWITCHING-MIB::agentStaticDsBindingRowStatus,INTEGER,read-create,,current,active(1):notInService(2):notReady(3):createAndGo(4):createAndWait(5):destroy(6),The status of this conceptual row. active(1) - this DHCP SNOOPING Binding is active createAndGo(4) - set to this value to create an instance destroy(6) - set to this value to delete an instance
.1.3.6.1.4.1.4526.10.1.2.8.24.11,FASTPATH-SWITCHING-MIB::agentDynamicDsBindingTable,,not-accessible,,current,,A table of the DHCP SNOOPING Dynamic entries
.1.3.6.1.4.1.4526.10.1.2.8.24.11.11,FASTPATH-SWITCHING-MIB::agentDynamicDsBinding,,not-accessible,agentDynamicDsBindingMacAddr,current,,Represents a binding in DHCP SNOOPING table
.1.3.6.1.4.1.4526.10.1.2.8.24.11.11.1,FASTPATH-SWITCHING-MIB::agentDynamicDsBindingIfIndex,,read-only,,current,,Interface on which this DHCP SNOOPING binding is going to be added.
.1.3.6.1.4.1.4526.10.1.2.8.24.11.11.2,FASTPATH-SWITCHING-MIB::agentDynamicDsBindingVlanId,Unsigned32,read-only,,current,, VLAN to whcig this DHCP SNOOPING binding is going to be added.
.1.3.6.1.4.1.4526.10.1.2.8.24.11.11.3,FASTPATH-SWITCHING-MIB::agentDynamicDsBindingMacAddr,OCTET,read-only,,current,,MAC address match value for the DHCP SNOOPING Binding.
.1.3.6.1.4.1.4526.10.1.2.8.24.11.11.4,FASTPATH-SWITCHING-MIB::agentDynamicDsBindingIpAddr,IpAddress,read-only,,current,,IP address match value for the DHCP SNOOPING Binding.
.1.3.6.1.4.1.4526.10.1.2.8.24.11.11.5,FASTPATH-SWITCHING-MIB::agentDynamicDsBindingLeaseRemainingTime,TimeTicks,read-only,,current,,This specifies the period for which the DHCP SNOOPING Binding is valid.
.1.3.6.1.4.1.4526.10.1.2.8.24.12,FASTPATH-SWITCHING-MIB::agentDhcpSnoopingRemoteFileName,OCTET,read-write,,current,,This object indicates the file name on the remote machine to save the DHCP Snooping bindings. This will be set only when we have a valid remote IP.
.1.3.6.1.4.1.4526.10.1.2.8.24.13,FASTPATH-SWITCHING-MIB::agentDhcpSnoopingRemoteIpAddr,IpAddress,read-write,,current,,This object indicates the IP address of the remote machine to save the DHCP Snooping bindings. This will be set only when we have a valid file name.
.1.3.6.1.4.1.4526.10.1.2.8.24.14,FASTPATH-SWITCHING-MIB::agentDhcpSnoopingStoreInterval,Unsigned32,read-write,,current,,This object indicates the perodic time interval to save the DHCP Snooping bindings.
.1.3.6.1.4.1.4526.10.1.2.8.25,FASTPATH-SWITCHING-MIB::agentDhcpL2RelayConfigGroup,,,,,,
.1.3.6.1.4.1.4526.10.1.2.8.25.1,FASTPATH-SWITCHING-MIB::agentDhcpL2RelayAdminMode,INTEGER,read-write,,current,true(1):false(2),This object indicates whether DHCP L2 Relay is enabled globally. If this object is set to 'true',admin mode is enabled globally. If this object is set to 'false',admin mode is disabled globally.
.1.3.6.1.4.1.4526.10.1.2.8.25.2,FASTPATH-SWITCHING-MIB::agentDhcpL2RelayIfConfigTable,,not-accessible,,current,,A table provides the mechanism to enable/disable and configure the trust state for DHCP L2Relay purpose at each physical interface capable of this feature.
.1.3.6.1.4.1.4526.10.1.2.8.25.2.1,FASTPATH-SWITCHING-MIB::agentDhcpL2RelayIfConfigEntry,,not-accessible,ifIndex,current,,A row instance contains the configuration for DHCP L2 Relay at each physical interface capable of this feature.
.1.3.6.1.4.1.4526.10.1.2.8.25.2.1.1,FASTPATH-SWITCHING-MIB::agentDhcpL2RelayIfEnable,INTEGER,read-write,,current,true(1):false(2),This object indicates whether the DHCP L2Relay is enabled or not
.1.3.6.1.4.1.4526.10.1.2.8.25.2.1.2,FASTPATH-SWITCHING-MIB::agentDhcpL2RelayIfTrustEnable,INTEGER,read-write,,current,true(1):false(2),This object indicates whether the interface is trusted for DHCP L2 Relay purpose.
.1.3.6.1.4.1.4526.10.1.2.8.25.3,FASTPATH-SWITCHING-MIB::agentDhcpL2RelayVlanConfigTable,,not-accessible,,current,,A table provides the mechanism to control DHCP L2 Relay per VLAN. When a VLAN is created in a device supporting this table, a corresponding entry of this table will be added.
.1.3.6.1.4.1.4526.10.1.2.8.25.3.1,FASTPATH-SWITCHING-MIB::agentDhcpL2RelayVlanConfigEntry,,not-accessible,agentDhcpL2RelayVlanIndex,current,,A row instance contains the configuration for DHCP L2 Relay at each existing VLAN.
.1.3.6.1.4.1.4526.10.1.2.8.25.3.1.1,FASTPATH-SWITCHING-MIB::agentDhcpL2RelayVlanIndex,Unsigned32,not-accessible,,current,,This object indicates the VLAN number on which DHCP L2 Relay feature is configured.
.1.3.6.1.4.1.4526.10.1.2.8.25.3.1.2,FASTPATH-SWITCHING-MIB::agentDhcpL2RelayVlanEnable,INTEGER,read-write,,current,true(1):false(2),This object indicates whether DHCP L2 Relay is enabled in this VLAN. If this object is set to 'true', DHCP L2 Relay is enabled. If this object is set to 'false', DHCP L2 Relay is disabled.
.1.3.6.1.4.1.4526.10.1.2.8.25.3.1.3,FASTPATH-SWITCHING-MIB::agentDhcpL2RelayCircuitIdVlanEnable,INTEGER,read-write,,current,true(1):false(2),This object indicates whether DHCP CircuitId is enabled for L2 relaying in this VLAN. If this object is set to 'true', DHCP CircuitId is enabled. If this object is set to 'false', DHCP CircuitId is disabled.
.1.3.6.1.4.1.4526.10.1.2.8.25.3.1.4,FASTPATH-SWITCHING-MIB::agentDhcpL2RelayRemoteIdVlanEnable,OCTET,read-write,,current,,When this object is set with a non-empty string, DHCP RemoteId is enabled for L2 relaying in this VLAN.
.1.3.6.1.4.1.4526.10.1.2.8.25.6,FASTPATH-SWITCHING-MIB::agentDhcpL2RelayStatsReset,INTEGER,read-write,,current,none(0):reset(1),Clear the DHCP L2Relay statistics on all ports. A value of reset(1) is used to reset the statistics. A read on this object will always return the value none(0). The value none(0) cannot be forcibly set by the administrator.
.1.3.6.1.4.1.4526.10.1.2.8.25.7,FASTPATH-SWITCHING-MIB::agentDhcpL2RelayStatsTable,,not-accessible,,current,,A table provides the mechanism for statics of DHCP L2 Relay.
.1.3.6.1.4.1.4526.10.1.2.8.25.7.1,FASTPATH-SWITCHING-MIB::agentDhcpL2RelayStatsEntry,,not-accessible,ifIndex,current,,A row instance contains the DHCP L2Relay statistics per interface.
.1.3.6.1.4.1.4526.10.1.2.8.25.7.1.1,FASTPATH-SWITCHING-MIB::agentDhcpL2RelayUntrustedSrvrMsgsWithOptn82,Counter32,read-only,,current,,This object indicates the number of DHCP server messages received with Option-82 field on the untrusted interface.
.1.3.6.1.4.1.4526.10.1.2.8.25.7.1.2,FASTPATH-SWITCHING-MIB::agentDhcpL2RelayUntrustedClntMsgsWithOptn82,Counter32,read-only,,current,,This object indicates the number of DHCP client messages received with Option-82 field on the untrusted interface.
.1.3.6.1.4.1.4526.10.1.2.8.25.7.1.3,FASTPATH-SWITCHING-MIB::agentDhcpL2RelayTrustedSrvrMsgsWithoutOptn82,Counter32,read-only,,current,,This object indicates the number of DHCP server messages received without Option-82 field on the trusted interface.
.1.3.6.1.4.1.4526.10.1.2.8.25.7.1.4,FASTPATH-SWITCHING-MIB::agentDhcpL2RelayTrustedClntMsgsWithoutOptn82,Counter32,read-only,,current,,This object indicates the number of DHCP client messages received without Option-82 field on the trusted interface.
.1.3.6.1.4.1.4526.10.1.2.8.26,FASTPATH-SWITCHING-MIB::agentSwitchVoiceVLANGroup,,,,,,
.1.3.6.1.4.1.4526.10.1.2.8.26.1,FASTPATH-SWITCHING-MIB::agentSwitchVoiceVLANAdminMode,INTEGER,read-write,,current,enable(1):disable(2),This enables or disables Voice VLAN on the system.
.1.3.6.1.4.1.4526.10.1.2.8.26.2,FASTPATH-SWITCHING-MIB::agentSwitchVoiceVlanDeviceTable,,not-accessible,,current,,A table of the Voice Vlan device entries.
.1.3.6.1.4.1.4526.10.1.2.8.26.2.1,FASTPATH-SWITCHING-MIB::agentSwitchVoiceVlanDeviceEntry,,not-accessible,agentSwitchVoiceVlanInterfaceNum:agentSwitchVoiceVlanDeviceMacAddress,current,,Represents entry for a Voice Device on the interface.
.1.3.6.1.4.1.4526.10.1.2.8.26.2.1.1,FASTPATH-SWITCHING-MIB::agentSwitchVoiceVlanInterfaceNum,Integer32,read-only,,current,,The interface number of this interface.
.1.3.6.1.4.1.4526.10.1.2.8.26.2.1.2,FASTPATH-SWITCHING-MIB::agentSwitchVoiceVlanDeviceMacAddress,OCTET,read-only,,current,,The Voice Device Mac address
.1.3.6.1.4.1.4526.10.1.2.9,FASTPATH-SWITCHING-MIB::agentTransferConfigGroup,,,,,,
.1.3.6.1.4.1.4526.10.1.2.9.1,FASTPATH-SWITCHING-MIB::agentTransferUploadGroup,,,,,,
.1.3.6.1.4.1.4526.10.1.2.9.1.1,FASTPATH-SWITCHING-MIB::agentTransferUploadMode,INTEGER,read-write,,current,tftp(1):xmodem(2):ymodem(3):zmodem(4):sftp(5):scp(6),Transfer upload mode configures the mode to use when uploading from the switch. The mode is either X/Y/ZMODEM, TFTP, SFTP or SCP. X/Y/ZMODEM is valid only when the file transfer is initiated by the serial EIA 232 port. SFTP and SCP are only allowed if the SSH feature is present. 
.1.3.6.1.4.1.4526.10.1.2.9.1.2,FASTPATH-SWITCHING-MIB::agentTransferUploadServerIP,IpAddress,read-write,,deprecated,,Transfer upload server IP configures the IP address of the server where the file is located. It is valid only when the Transfer Mode is TFTP, SFTP, or SCP. The address is 4 integer bytes ranging from 0 to 255. This object is deprecated in favour of agentTransferUploadServerAddress and agentTransferUploadServerAddressType.
.1.3.6.1.4.1.4526.10.1.2.9.1.3,FASTPATH-SWITCHING-MIB::agentTransferUploadPath,OCTET,read-write,,current,,Transfer upload path configures the directory path where the file is to be uploaded to. The switch remembers the last file path used. 
.1.3.6.1.4.1.4526.10.1.2.9.1.4,FASTPATH-SWITCHING-MIB::agentTransferUploadFilename,OCTET,read-write,,current,,Transfer upload filename configures the file name for the file being uploaded from the switch. It can be up to 32 alphanumeric characters. The switch remembers the last file name used. File path can be appended to the file name if the string is less than 17 characters. Otherwise, the File Path field will need to be used and the File Name will be appended to the File Path as is. An example would be File Path set to c:\tftp\code\ and File Name set to e1r1v1.opr. Note: File Name, File Path, and Server IP Address are applicable only if the Transfer Mode is TFTP, SFTP or SCP.
.1.3.6.1.4.1.4526.10.1.2.9.1.5,FASTPATH-SWITCHING-MIB::agentTransferUploadDataType,INTEGER,read-write,,current,config(2):errorlog(3):messagelog(4):traplog(5):clibanner(6):code(7),Transfer upload datatype configures the type of file to upload from the switch. The types for upload are: - Configuration File - Error log - Message log - Trap log - Banner File 
.1.3.6.1.4.1.4526.10.1.2.9.1.6,FASTPATH-SWITCHING-MIB::agentTransferUploadStart,INTEGER,read-write,,current,enable(1):disable(2),Transfer upload start will start an upload transfer. The agentTransferUploadMode object must not be set to xmodem(2), ymodem(3), or zmodem(4) to initiate a transfer via SNMP.
.1.3.6.1.4.1.4526.10.1.2.9.1.7,FASTPATH-SWITCHING-MIB::agentTransferUploadStatus,INTEGER,read-only,,current,notInitiated(1):transferStarting(2):errorStarting(3):wrongFileType(4):updatingConfig(5):invalidConfigFile(6):writingToFlash(7):failureWritingToFlash(8):checkingCRC(9):failedCRC(10):unknownDirection(11):transferSuccessful(12):transferFailed(13),Indicates the current status of an upload transfer.
.1.3.6.1.4.1.4526.10.1.2.9.1.8,FASTPATH-SWITCHING-MIB::agentTransferUploadServerAddressType,INTEGER,read-write,,current,unknown(0):ipv4(1):ipv6(2):ipv4z(3):ipv6z(4):dns(16),The type of the serverip address, as defined in the InetAddress MIB. The agentTransferUploadServerAddress object is intepreted within the context of agentTransferUploadServerAddressType
.1.3.6.1.4.1.4526.10.1.2.9.1.9,FASTPATH-SWITCHING-MIB::agentTransferUploadServerAddress,OCTET,read-write,,current,,Transfer upload serverip configures the IP address of the server where the file is to be uploaded to.It is valid only when the Transfer Mode is TFTP, SFTP or SCP. The type of this address is determined by the value of the agentTransferUploadServerAddressType object. The values for agentTransferUploadServerAddressType and agentTransferUploadServerAddress must be consistent.
.1.3.6.1.4.1.4526.10.1.2.9.1.10,FASTPATH-SWITCHING-MIB::agentTransferUploadImagename,INTEGER,read-write,,current,unknown(1):image1(2):image2(3),Transfer upload image name. Sets the image to be uploaded as the specified name Note: Imagename, File Name, File Path, and Server IP Address are applicable only if the Transfer Mode is TFTP, SFTP or SCP.
.1.3.6.1.4.1.4526.10.1.2.9.1.11,FASTPATH-SWITCHING-MIB::agentTransferUploadUsername,OCTET,read-write,,current,,Username applicable only to secure upload types, i.e., SFTP or SCP. 
.1.3.6.1.4.1.4526.10.1.2.9.1.12,FASTPATH-SWITCHING-MIB::agentTransferUploadPassword,OCTET,read-write,,current,,Password applicable only to secure upload types, i.e. SFTP or SCP. 
.1.3.6.1.4.1.4526.10.1.2.9.2,FASTPATH-SWITCHING-MIB::agentTransferDownloadGroup,,,,,,
.1.3.6.1.4.1.4526.10.1.2.9.2.1,FASTPATH-SWITCHING-MIB::agentTransferDownloadMode,INTEGER,read-write,,current,tftp(1):xmodem(2):ymodem(3):zmodem(4):sftp(5):scp(6),Transfer download mode configures the mode to use when downloading to the switch. The mode is either X/Y/ZMODEM, TFTP, SFTP or SCP. X/Y/ZMODEM is valid only when the file transfer is initiated by the serial EIA 232 port. SFTP and SCP are only allowed if the SSH feature is present. 
.1.3.6.1.4.1.4526.10.1.2.9.2.2,FASTPATH-SWITCHING-MIB::agentTransferDownloadServerIP,IpAddress,read-write,,deprecated,,Transfer download serverip configures the IP address of the server where the file is located. It is valid only when the Transfer Mode is TFTP, SFTP or SCP. The address is 4 integer bytes ranging from 0 to 255. This object is deprecated in favour of agentTransferDownloadServerAddress and agentTransferDownloadServerAddressType.
.1.3.6.1.4.1.4526.10.1.2.9.2.3,FASTPATH-SWITCHING-MIB::agentTransferDownloadPath,OCTET,read-write,,current,,Transfer download path configures the directory path where the file is located. The switch remembers the last file path used. 
.1.3.6.1.4.1.4526.10.1.2.9.2.4,FASTPATH-SWITCHING-MIB::agentTransferDownloadFilename,OCTET,read-write,,current,,Transfer download filename configures the file name for the file being downloaded to the switch. It can be up to 32 alphanumeric characters. The switch remembers the last file name used. File path can be appended to the file name if the string is less than 33 characters. Otherwise, the File Path field will need to be used and the File Name will be appended to the File Path as is. An example would be File Path set to c:\tftp\code\ and File Name set to e1r1v1.opr. Note: Imagename, File Name, File Path, and Server IP Address are applicable only if the Transfer Mode is TFTP, SFTP or SCP.
.1.3.6.1.4.1.4526.10.1.2.9.2.5,FASTPATH-SWITCHING-MIB::agentTransferDownloadDataType,INTEGER,read-write,,current,code(2):config(3):sshkey-rsa1(4):sshkey-rsa2(5):sshkey-dsa(6):sslpem-root(7):sslpem-server(8):sslpem-dhweak(9):sslpem-dhstrong(10):clibanner(11):kernel(12):tr069-acs-sslpem-root(13):tr069-client-ssl-private-key(14):tr069-client-ssl-cert(15),Transfer download datatype configures the type of file to download to the switch. The types for download are: code - Code File config - Configuration File sshkey-rsa1 - SSH-1 RSA Key File sshkey-rsa2 - SSH-2 RSA Key PEM File sshkey-dsa - SSH-2 DSA Key PEM File sslpem-root - SSL Trusted Root Certificate PEM File sslpem-server - SSL Server Certificate PEM File sslpem-dhweak - SSL DH Weak Encryption Parameter PEM File sslpem-dhstrong - SSL DH Strong Encryption Parameter PEM File cli-banner - CLI Banner File kernel - Kernel File Note: SSH Key files can only be downloaded if SSH Server is administratively disabled, and there are no active SSH sessions. Kernel file can be downloaded only on raptor platform and linux operating system. 
.1.3.6.1.4.1.4526.10.1.2.9.2.6,FASTPATH-SWITCHING-MIB::agentTransferDownloadStart,INTEGER,read-write,,current,enable(1):disable(2),Transfer download start will start an download transfer. The agentTransferDownloadMode object must not be set to xmodem(2), ymodem(3), or zmodem(4) to initiate a transfer via SNMP.
.1.3.6.1.4.1.4526.10.1.2.9.2.7,FASTPATH-SWITCHING-MIB::agentTransferDownloadStatus,INTEGER,read-only,,current,notInitiated(1):transferStarting(2):errorStarting(3):wrongFileType(4):updatingConfig(5):invalidConfigFile(6):writingToFlash(7):failureWritingToFlash(8):checkingCRC(9):failedCRC(10):unknownDirection(11):transferSuccessful(12):transferFailed(13),Indicates the current status of an download transfer.
.1.3.6.1.4.1.4526.10.1.2.9.2.8,FASTPATH-SWITCHING-MIB::agentTransferDownloadServerAddressType,INTEGER,read-write,,current,unknown(0):ipv4(1):ipv6(2):ipv4z(3):ipv6z(4):dns(16),The type of the serverip address, as defined in the InetAddress MIB. The agentTransferDownloadServerAddress object is intepreted within the context of agentTransferDownloadServerAddressType
.1.3.6.1.4.1.4526.10.1.2.9.2.9,FASTPATH-SWITCHING-MIB::agentTransferDownloadServerAddress,OCTET,read-write,,current,,Transfer download serverip configures the IP address of the server where the file is to be downloaded from.It is valid only when the Transfer Mode is TFTP, SFTP, or SCP. The type of this address is determined by the value of the agentTransferDownloadServerAddressType object. The values for agentTransferDownloadServerAddressType and agentTransferDownloadServerAddress must be consistent.
.1.3.6.1.4.1.4526.10.1.2.9.2.10,FASTPATH-SWITCHING-MIB::agentTransferDownloadImagename,INTEGER,read-write,,current,unknown(1):image1(2):image2(3),Transfer download image name. Sets the downloaded image as the specified name Note: Imagename, File Name, File Path, and Server IP Address are applicable only if the Transfer Mode is TFTP, SFTP or SCP.
.1.3.6.1.4.1.4526.10.1.2.9.2.11,FASTPATH-SWITCHING-MIB::agentTransferDownloadUsername,OCTET,read-write,,current,,Username applicable only to secure download types, i.e., SFTP or SCP. 
.1.3.6.1.4.1.4526.10.1.2.9.2.12,FASTPATH-SWITCHING-MIB::agentTransferDownloadPassword,OCTET,read-write,,current,,Password applicable only to secure download types, i.e. SFTP or SCP. 
.1.3.6.1.4.1.4526.10.1.2.9.3,FASTPATH-SWITCHING-MIB::agentImageConfigGroup,,,,,,
.1.3.6.1.4.1.4526.10.1.2.9.3.1,FASTPATH-SWITCHING-MIB::agentImage1,OCTET,read-only,,current,,The image1 software version .
.1.3.6.1.4.1.4526.10.1.2.9.3.2,FASTPATH-SWITCHING-MIB::agentImage2,OCTET,read-only,,current,,The image2 software version.
.1.3.6.1.4.1.4526.10.1.2.9.3.3,FASTPATH-SWITCHING-MIB::agentActiveImage,OCTET,read-only,,current,,The active image name. image1 or image2. 
.1.3.6.1.4.1.4526.10.1.2.9.3.4,FASTPATH-SWITCHING-MIB::agentNextActiveImage,OCTET,read-write,,current,,The next active image name. user assigns either image1 or image2. 
.1.3.6.1.4.1.4526.10.1.2.10,FASTPATH-SWITCHING-MIB::agentPortMirroringGroup,,,,,,
.1.3.6.1.4.1.4526.10.1.2.10.1,FASTPATH-SWITCHING-MIB::agentMirroredPortIfIndex,Integer32,read-write,,obsolete,,IfIndex of the mirrored port
.1.3.6.1.4.1.4526.10.1.2.10.2,FASTPATH-SWITCHING-MIB::agentProbePortIfIndex,Integer32,read-write,,obsolete,,IfIndex of the probe port
.1.3.6.1.4.1.4526.10.1.2.10.3,FASTPATH-SWITCHING-MIB::agentPortMirroringMode,INTEGER,read-write,,obsolete,enable(1):disable(2):delete(3),Port mirroring mode: enable - enable mirroring mode disable - disable mirroring mode delete - clear MirroredPort and Probe Port configuration
.1.3.6.1.4.1.4526.10.1.2.10.4,FASTPATH-SWITCHING-MIB::agentPortMirrorTable,,not-accessible,,current,,This table includes entries for each Port Mirroring session.
.1.3.6.1.4.1.4526.10.1.2.10.4.1,FASTPATH-SWITCHING-MIB::agentPortMirrorEntry,,not-accessible,agentPortMirrorSessionNum,current,,Provides configuration of a Port Mirroring session specifying the destination port, and the source Port Mask, providing a many-to-one mapping.
.1.3.6.1.4.1.4526.10.1.2.10.4.1.1,FASTPATH-SWITCHING-MIB::agentPortMirrorSessionNum,Unsigned32,not-accessible,,current,,The Session number of this mirroring entry. The number of sessions is fixed, and is platform dependant.
.1.3.6.1.4.1.4526.10.1.2.10.4.1.2,FASTPATH-SWITCHING-MIB::agentPortMirrorDestinationPort,Unsigned32,read-write,,current,,The port which traffic from the mirrored ports will be sent to.
.1.3.6.1.4.1.4526.10.1.2.10.4.1.3,FASTPATH-SWITCHING-MIB::agentPortMirrorSourcePortMask,OCTET,read-write,,current,,The ports from which traffic will be sent to the destination port. The destination port can not be included in this list of ports.
.1.3.6.1.4.1.4526.10.1.2.10.4.1.4,FASTPATH-SWITCHING-MIB::agentPortMirrorAdminMode,INTEGER,read-write,,current,enable(1):disable(2):delete(3),The status of this port mirroring session. enable(1) - This session is active and all traffic from the source ports will be mirrored to the destination port. disable(2) - This session is not active. delete(3) - Remove the configuration for this Session
.1.3.6.1.4.1.4526.10.1.2.10.5,FASTPATH-SWITCHING-MIB::agentPortMirrorTypeTable,,not-accessible,,current,,This table includes entries for each source port's direction of port mirroring.
.1.3.6.1.4.1.4526.10.1.2.10.5.1,FASTPATH-SWITCHING-MIB::agentPortMirrorTypeEntry,,not-accessible,agentPortMirrorSessionNum:agentPortMirrorTypeSourcePort,current,,Provides configuration of a Port Mirroring direction specifying the session of the port mirroring and source port
.1.3.6.1.4.1.4526.10.1.2.10.5.1.1,FASTPATH-SWITCHING-MIB::agentPortMirrorTypeSourcePort,Unsigned32,not-accessible,,current,,The port from which traffic will be sent to the destination port. This port should be a source port in the corresponding session
.1.3.6.1.4.1.4526.10.1.2.10.5.1.2,FASTPATH-SWITCHING-MIB::agentPortMirrorTypeType,INTEGER,read-write,,current,tx(1):rx(2):txrx(3),The direction of the data to be mirrored on this source port. tx(1) - The data that is transmitted from the source port. rx(2) - The data that is received on the source port. txrx(3) - The data that is transmitted/received from/on the source port
.1.3.6.1.4.1.4526.10.1.2.12,FASTPATH-SWITCHING-MIB::agentDot3adAggPortTable,,not-accessible,,current,,This table provides 802.3ad link aggregation information for each physical port that is not available through the standard MIB.
.1.3.6.1.4.1.4526.10.1.2.12.1,FASTPATH-SWITCHING-MIB::agentDot3adAggPortEntry,,not-accessible,agentDot3adAggPort,current,,Information about a table entry. The agentDot3adAggPort identifies the external interface number of the port.
.1.3.6.1.4.1.4526.10.1.2.12.1.1,FASTPATH-SWITCHING-MIB::agentDot3adAggPort,Integer32,read-only,,current,,ifIndex of this physical port
.1.3.6.1.4.1.4526.10.1.2.12.1.2,FASTPATH-SWITCHING-MIB::agentDot3adAggPortLACPMode,INTEGER,read-write,,current,enable(1):disable(2),Enable/disable 802.3ad LACP on this port
.1.3.6.1.4.1.4526.10.1.2.13,FASTPATH-SWITCHING-MIB::agentPortConfigTable,,not-accessible,,current,,A table of the switch's physical port config entries
.1.3.6.1.4.1.4526.10.1.2.13.1,FASTPATH-SWITCHING-MIB::agentPortConfigEntry,,not-accessible,agentPortDot1dBasePort,current,,Switch's physical port config entry
.1.3.6.1.4.1.4526.10.1.2.13.1.1,FASTPATH-SWITCHING-MIB::agentPortDot1dBasePort,Integer32,read-only,,current,,The port number of this port.
.1.3.6.1.4.1.4526.10.1.2.13.1.2,FASTPATH-SWITCHING-MIB::agentPortIfIndex,Integer32,read-only,,current,,The switch's Port IfIndex
.1.3.6.1.4.1.4526.10.1.2.13.1.3,FASTPATH-SWITCHING-MIB::agentPortIanaType,INTEGER,read-only,,current,other(1):regular1822(2):hdh1822(3):ddnX25(4):rfc877x25(5):ethernetCsmacd(6):iso88023Csmacd(7):iso88024TokenBus(8):iso88025TokenRing(9):iso88026Man(10):starLan(11):proteon10Mbit(12):proteon80Mbit(13):hyperchannel(14):fddi(15):lapb(16):sdlc(17):ds1(18):e1(19):basicISDN(20):primaryISDN(21):propPointToPointSerial(22):ppp(23):softwareLoopback(24):eon(25):ethernet3Mbit(26):nsip(27):slip(28):ultra(29):ds3(30):sip(31):frameRelay(32):rs232(33):para(34):arcnet(35):arcnetPlus(36):atm(37):miox25(38):sonet(39):x25ple(40):iso88022llc(41):localTalk(42):smdsDxi(43):frameRelayService(44):v35(45):hssi(46):hippi(47):modem(48):aal5(49):sonetPath(50):sonetVT(51):smdsIcip(52):propVirtual(53):propMultiplexor(54):ieee80212(55):fibreChannel(56):hippiInterface(57):frameRelayInterconnect(58):aflane8023(59):aflane8025(60):cctEmul(61):fastEther(62):isdn(63):v11(64):v36(65):g703at64k(66):g703at2mb(67):qllc(68):fastEtherFX(69):channel(70):ieee80211(71):ibm370parChan(72):escon(73):dlsw(74):isdns(75):isdnu(76):lapd(77):ipSwitch(78):rsrb(79):atmLogical(80):ds0(81):ds0Bundle(82):bsc(83):async(84):cnr(85):iso88025Dtr(86):eplrs(87):arap(88):propCnls(89):hostPad(90):termPad(91):frameRelayMPI(92):x213(93):adsl(94):radsl(95):sdsl(96):vdsl(97):iso88025CRFPInt(98):myrinet(99):voiceEM(100):voiceFXO(101):voiceFXS(102):voiceEncap(103):voiceOverIp(104):atmDxi(105):atmFuni(106):atmIma(107):pppMultilinkBundle(108):ipOverCdlc(109):ipOverClaw(110):stackToStack(111):virtualIpAddress(112):mpc(113):ipOverAtm(114):iso88025Fiber(115):tdlc(116):gigabitEthernet(117):hdlc(118):lapf(119):v37(120):x25mlp(121):x25huntGroup(122):transpHdlc(123):interleave(124):fast(125):ip(126):docsCableMaclayer(127):docsCableDownstream(128):docsCableUpstream(129):a12MppSwitch(130):tunnel(131):coffee(132):ces(133):atmSubInterface(134):l2vlan(135):l3ipvlan(136):l3ipxvlan(137):digitalPowerline(138):mediaMailOverIp(139):dtm(140):dcn(141):ipForward(142):msdsl(143):ieee1394(144):if-gsn(145):dvbRccMacLayer(146):dvbRccDownstream(147):dvbRccUpstream(148):atmVirtual(149):mplsTunnel(150):srp(151):voiceOverAtm(152):voiceOverFrameRelay(153):idsl(154):compositeLink(155):ss7SigLink(156):propWirelessP2P(157):frForward(158):rfc1483(159):usb(160):ieee8023adLag(161):bgppolicyaccounting(162):frf16MfrBundle(163):h323Gatekeeper(164):h323Proxy(165):mpls(166):mfSigLink(167):hdsl2(168):shdsl(169):ds1FDL(170):pos(171):dvbAsiIn(172):dvbAsiOut(173):plc(174):nfas(175):tr008(176):gr303RDT(177):gr303IDT(178):isup(179):propDocsWirelessMaclayer(180):propDocsWirelessDownstream(181):propDocsWirelessUpstream(182):hiperlan2(183):propBWAp2Mp(184):sonetOverheadChannel(185):digitalWrapperOverheadChannel(186):aal2(187):radioMAC(188):atmRadio(189):imt(190):mvl(191):reachDSL(192):frDlciEndPt(193):atmVciEndPt(194):opticalChannel(195):opticalTransport(196):propAtm(197):voiceOverCable(198):infiniband(199):teLink(200):q2931(201):virtualTg(202):sipTg(203):sipSig(204):docsCableUpstreamChannel(205):econet(206):pon155(207):pon622(208):bridge(209):linegroup(210):voiceEMFGD(211):voiceFGDEANA(212):voiceDID(213):mpegTransport(214):sixToFour(215):gtp(216):pdnEtherLoop1(217):pdnEtherLoop2(218):opticalChannelGroup(219):homepna(220):gfp(221):ciscoISLvlan(222):actelisMetaLOOP(223):fcipLink(224):rpr(225):qam(226):lmp(227):cblVectaStar(228):docsCableMCmtsDownstream(229):adsl2(230):macSecControlledIF(231):macSecUncontrolledIF(232):aviciOpticalEther(233):atmbond(234):voiceFGDOS(235):mocaVersion1(236):ieee80216WMAN(237):adsl2plus(238):dvbRcsMacLayer(239):dvbTdm(240):dvbRcsTdma(241):x86Laps(242):wwanPP(243):wwanPP2(244):voiceEBS(245):ifPwType(246):ilan(247):pip(248):aluELP(249):gpon(250):vdsl2(251):capwapDot11Profile(252):capwapDot11Bss(253):capwapWtpVirtualRadio(254):bits(255):docsCableUpstreamRfPort(256):cableDownstreamRfPort(257):vmwareVirtualNic(258):ieee802154(259):otnOdu(260):otnOtu(261):ifVfiType(262):g9981(263):g9982(264):g9983(265):aluEpon(266):aluEponOnu(267):aluEponPhysicalUni(268):aluEponLogicalLink(269):aluGponOnu(270):aluGponPhysicalUni(271):vmwareNicTeam(272):docsOfdmDownstream(277):docsOfdmaUpstream(278):gfast(279):sdci(280):xboxWireless(281):fastdsl(282):docsCableScte55d1FwdOob(283):docsCableScte55d1RetOob(284):docsCableScte55d2DsOob(285):docsCableScte55d2UsOob(286):docsCableNdf(287):docsCableNdr(288):ptm(289):ghn(290):otnOtsi(291):otnOtuc(292):otnOduc(293):otnOtsig(294):microwaveCarrierTermination(295):microwaveRadioLinkTerminal(296),The switch's Port Type
.1.3.6.1.4.1.4526.10.1.2.13.1.4,FASTPATH-SWITCHING-MIB::agentPortSTPMode,INTEGER,read-write,,current,dot1d(1):fast(2):off(3),The switch's Port Spanning Tree Protocol Mode STP mode values are: dot1d (the default) fast, indicates you want to use the fast spanning tree mode off, indicates the STP mode is turned off for a particular port This object is only supported when the Dot1d Protocol is enabled.
.1.3.6.1.4.1.4526.10.1.2.13.1.5,FASTPATH-SWITCHING-MIB::agentPortSTPState,INTEGER,read-only,,current,blocking(1):listening(2):learning(3):forwarding(4):disabled(5),The switch's Port Spanning Tree Protocol State. This object is only supported when the Dot1d Protocol is enabled.
.1.3.6.1.4.1.4526.10.1.2.13.1.6,FASTPATH-SWITCHING-MIB::agentPortAdminMode,INTEGER,read-write,,current,enable(1):disable(2),The switch's Port Admin Mode
.1.3.6.1.4.1.4526.10.1.2.13.1.7,FASTPATH-SWITCHING-MIB::agentPortPhysicalMode,INTEGER,read-write,,obsolete,auto-negotiate(1):half-10(2):full-10(3):half-100(4):full-100(5):half-100fx(6):full-100fx(7):full-1000sx(8):full-10gsx(9),The switch's Port Speed Mode. This is the configured physical mode. This object is read-only for gigabit ports
.1.3.6.1.4.1.4526.10.1.2.13.1.8,FASTPATH-SWITCHING-MIB::agentPortPhysicalStatus,INTEGER,read-only,,obsolete,auto-negotiate(1):half-10(2):full-10(3):half-100(4):full-100(5):half-100fx(6):full-100fx(7):full-1000sx(8):full-10gsx(9),The switch's Port Physical Speed Status. This is the current actual speed.
.1.3.6.1.4.1.4526.10.1.2.13.1.9,FASTPATH-SWITCHING-MIB::agentPortLinkTrapMode,INTEGER,read-write,,current,enable(1):disable(2),If enabled, link up and link down traps will be sent for this port.
.1.3.6.1.4.1.4526.10.1.2.13.1.10,FASTPATH-SWITCHING-MIB::agentPortClearStats,INTEGER,read-write,,current,enable(1):disable(2),clear stats for this port only
.1.3.6.1.4.1.4526.10.1.2.13.1.11,FASTPATH-SWITCHING-MIB::agentPortDefaultType,OBJECT,read-write,,current,,This object identifies the default administrative port type, to be used in conjunction with the operational port type denoted by agentPortType. This object represents the administratively-configured type of the MAU. If auto-negotiation is not enabled or is not implemented for this MAU, the value of this object determines the operational type of the MAU. In this case, a set to this object will force the MAU into the specified operating mode. If auto-negotiation is implemented and enabled for this MAU, the operational type of the MAU is determined by auto-negotiation, and the value of this object denotes the type to which the MAU will automatically revert if/when auto-negotiation is later disabled. The valid values for this object are: dot3MauType10BaseTHD dot3MauType10BaseTFD dot3MauType100BaseTXHD dot3MauType100BaseTXFD dot3MauType100BaseFXFD
.1.3.6.1.4.1.4526.10.1.2.13.1.12,FASTPATH-SWITCHING-MIB::agentPortType,OBJECT,read-only,,current,,This object identifies the port type. An initial set of MAU types are defined in RFC 2668. The assignment of OBJECT IDENTIFIERs to new types of MAUs is managed by the IANA. If the MAU type is unknown, the object identifier unknownMauType OBJECT IDENTIFIER ::= { 0 0 } is returned. Note that unknownMauType is a syntactically valid object identifier, and any conformant implementation of ASN.1 and the BER must be able to generate and recognize this value. This object represents the operational type of the MAU, as determined by either (1) the result of the auto-negotiation function or (2) if auto-negotiation is not enabled or is not implemented for this MAU, by the value of the object agentPortDefaultType, or (3) for the GigE card a value determined by the GBIC connected to the card. In case (2), a set to the object agentPortDefaultType will force the MAU into the new operating mode. The valid values for this object are: dot3MauType10BaseTHD dot3MauType10BaseTFD dot3MauType100BaseTXHD dot3MauType100BaseTXFD dot3MauType100BaseFXFD dot3MauType1000BaseSXFD dot3MauType1000BaseTFD dot3MauType1000BaseXFD dot3MauType10GigBaseX
.1.3.6.1.4.1.4526.10.1.2.13.1.13,FASTPATH-SWITCHING-MIB::agentPortAutoNegAdminStatus,INTEGER,read-write,,current,enable(1):disable(2),This object identifies the administration status of auto negotiation for this port.
.1.3.6.1.4.1.4526.10.1.2.13.1.14,FASTPATH-SWITCHING-MIB::agentPortDot3FlowControlMode,INTEGER,read-write,,current,enable(1):disable(2),Config flowcontrol allows you to enable or disable 802.3x flow control for this port. This value applies to only full-duplex mode ports. 
.1.3.6.1.4.1.4526.10.1.2.13.1.15,FASTPATH-SWITCHING-MIB::agentPortDVlanTagMode,INTEGER,read-write,,current,enable(1):disable(2),Controls the Double Vlan Tag mode on this port.
.1.3.6.1.4.1.4526.10.1.2.13.1.16,FASTPATH-SWITCHING-MIB::agentPortDVlanTagEthertype,Integer32,read-write,,current,,Configures the Double Vlan Tag Ethertype for this port. If this object is supported, ethertype cannot be configured globally for the switch. Commonly used are the Ethertypes for vman tags (34984, or 0x88A8) and dot1q tags (33024, or 0x8100).
.1.3.6.1.4.1.4526.10.1.2.13.1.17,FASTPATH-SWITCHING-MIB::agentPortDVlanTagCustomerId,Integer32,read-write,,current,,Configures the Customer ID for the Double Vlan Tag for this port.
.1.3.6.1.4.1.4526.10.1.2.13.1.18,FASTPATH-SWITCHING-MIB::agentPortMaxFrameSizeLimit,Integer32,read-only,,current,,This object identifies the largest value that can be configured for agentPortMaxFrameSize
.1.3.6.1.4.1.4526.10.1.2.13.1.19,FASTPATH-SWITCHING-MIB::agentPortMaxFrameSize,Integer32,read-write,,current,,This object identifies the currently configured maximum frame size value for this port. The maximmum value that this object can be set to is the value of agentPortMaxFrameSizeLimit. For Ethernet ports which support 802.1Q vlan tagging, the minimum value that this object can be set to is 1522
.1.3.6.1.4.1.4526.10.1.2.13.1.20,FASTPATH-SWITCHING-MIB::agentPortBroadcastControlMode,INTEGER,read-write,,current,enable(1):disable(2),If enabled, broadcast storm recovery will function on this port. When you specify Enable for Broadcast Storm Recovery and the broadcast traffic on this Ethernet port exceeds the configured threshold, the switch blocks (discards) the broadcast traffic.
.1.3.6.1.4.1.4526.10.1.2.13.1.21,FASTPATH-SWITCHING-MIB::agentPortBroadcastControlThreshold,Integer32,read-write,,current,,Configures the broadcast storm recovery threshold for this port as a percentage of port speed or as an absolute pps rate.
.1.3.6.1.4.1.4526.10.1.2.13.1.22,FASTPATH-SWITCHING-MIB::agentPortMulticastControlMode,INTEGER,read-write,,current,enable(1):disable(2),If enabled, multicast storm recovery will function on this port. When you specify Enable for Multicast Storm Recovery and the multicast traffic on this Ethernet port exceeds the configured threshold, the switch blocks (discards) the multicast traffic.
.1.3.6.1.4.1.4526.10.1.2.13.1.23,FASTPATH-SWITCHING-MIB::agentPortMulticastControlThreshold,Integer32,read-write,,current,,Configures the multicast storm recovery threshold for this port as a percentage of port speed or as an absolute pps rate.
.1.3.6.1.4.1.4526.10.1.2.13.1.24,FASTPATH-SWITCHING-MIB::agentPortUnicastControlMode,INTEGER,read-write,,current,enable(1):disable(2),If enabled, unicast storm recovery will function on this port. When you specify Enable for Unicast Storm Recovery and the unknown unicast traffic on this Ethernet port exceeds the configured threshold, the switch blocks (discards) the unknown unicast traffic.
.1.3.6.1.4.1.4526.10.1.2.13.1.25,FASTPATH-SWITCHING-MIB::agentPortUnicastControlThreshold,Integer32,read-write,,current,,Configures the unicast storm recovery threshold for this port as a percentage of port speed or as an absolute pps rate.
.1.3.6.1.4.1.4526.10.1.2.13.1.26,FASTPATH-SWITCHING-MIB::agentPortBroadcastControlThresholdUnit,INTEGER,read-write,,current,percent(1):pps(2),Configures the units of the threshold value to percentage of port speed or absolute packets per second.
.1.3.6.1.4.1.4526.10.1.2.13.1.27,FASTPATH-SWITCHING-MIB::agentPortMulticastControlThresholdUnit,INTEGER,read-write,,current,percent(1):pps(2),Configures the units of the threshold value to percentage of port speed or absolute packets per second.
.1.3.6.1.4.1.4526.10.1.2.13.1.28,FASTPATH-SWITCHING-MIB::agentPortUnicastControlThresholdUnit,INTEGER,read-write,,current,percent(1):pps(2),Configures the units of the threshold value to percentage of port speed or absolute packets per second.
.1.3.6.1.4.1.4526.10.1.2.13.1.29,FASTPATH-SWITCHING-MIB::agentPortVoiceVlanMode,INTEGER,read-write,,current,none(1):vlanid(2):dot1p(3):untagged(4):disable(5),Describes and Configures the Port Voice VLAN Mode.
.1.3.6.1.4.1.4526.10.1.2.13.1.30,FASTPATH-SWITCHING-MIB::agentPortVoiceVlanID,Integer32,read-write,,current,,Describes and Configures the Port Voice VLAN ID if the Voice Vlan Mode is Vlan ID.
.1.3.6.1.4.1.4526.10.1.2.13.1.31,FASTPATH-SWITCHING-MIB::agentPortVoiceVlanPriority,INTEGER,read-write,,current,,Describes and Configures the Port Voice VLAN Priority if the Voice Vlan Mode is dot1p. A value of 255 indicates that the priority is not configured.
.1.3.6.1.4.1.4526.10.1.2.13.1.32,FASTPATH-SWITCHING-MIB::agentPortVoiceVlanDataPriorityMode,INTEGER,read-write,,current,trust(1):untrust(2),Describes and Configures the Port Voice VLAN Data Priority Mode.
.1.3.6.1.4.1.4526.10.1.2.13.1.33,FASTPATH-SWITCHING-MIB::agentPortVoiceVlanOperationalStatus,INTEGER,read-only,,current,enabled(1):disabled(2),Describes the Port Voice VLAN Operational Status.
.1.3.6.1.4.1.4526.10.1.2.13.1.34,FASTPATH-SWITCHING-MIB::agentPortVoiceVlanUntagged,INTEGER,read-write,,current,false(0):true(1),Describes and Configures the Port Voice VLAN tagging mode.
.1.3.6.1.4.1.4526.10.1.2.13.1.35,FASTPATH-SWITCHING-MIB::agentPortVoiceVlanNoneMode,INTEGER,read-write,,current,false(0):true(1),Describes and Configures the Port Voice VLAN None mode.
.1.3.6.1.4.1.4526.10.1.2.13.1.36,FASTPATH-SWITCHING-MIB::agentPortVoiceVlanDSCP,Integer32,read-write,,current,,Describes and Configures the Port Voice VLAN DSCP value.
.1.3.6.1.4.1.4526.10.1.2.13.1.37,FASTPATH-SWITCHING-MIB::agentPortVoiceVlanAuthMode,INTEGER,read-write,,current,enable(1):disable(2),Describes and Configures the Port Voice VLAN Authentication mode. Disable means authentication not required for voice devices when dot1x is enabled.
.1.3.6.1.4.1.4526.10.1.2.13.1.38,FASTPATH-SWITCHING-MIB::agentPortDot3FlowControlOperStatus,INTEGER,read-only,,current,active(1):inactive(2),This object identifies operational status of the flow control per port.
.1.3.6.1.4.1.4526.10.1.2.14,FASTPATH-SWITCHING-MIB::agentProtocolConfigGroup,,,,,,
.1.3.6.1.4.1.4526.10.1.2.14.1,FASTPATH-SWITCHING-MIB::agentProtocolGroupCreate,OCTET,read-write,,current,,Set to non-empty string to create a Protocol-Based VLAN group.
.1.3.6.1.4.1.4526.10.1.2.14.2,FASTPATH-SWITCHING-MIB::agentProtocolGroupTable,,not-accessible,,current,,A table of the switch's Protocol-based VLAN entries
.1.3.6.1.4.1.4526.10.1.2.14.2.1,FASTPATH-SWITCHING-MIB::agentProtocolGroupEntry,,not-accessible,agentProtocolGroupId,current,,Switch's Protocol-based VLAN entry
.1.3.6.1.4.1.4526.10.1.2.14.2.1.1,FASTPATH-SWITCHING-MIB::agentProtocolGroupId,Integer32,read-only,,current,,Group identifier of the Protocol-based VLAN entry.
.1.3.6.1.4.1.4526.10.1.2.14.2.1.2,FASTPATH-SWITCHING-MIB::agentProtocolGroupName,OCTET,read-only,,current,,Group name of the Protocol-based VLAN entry.
.1.3.6.1.4.1.4526.10.1.2.14.2.1.3,FASTPATH-SWITCHING-MIB::agentProtocolGroupVlanId,Integer32,read-write,,current,,VLAN associated with the Protocol-based VLAN entry. Set to 0 to remove.
.1.3.6.1.4.1.4526.10.1.2.14.2.1.4,FASTPATH-SWITCHING-MIB::agentProtocolGroupProtocolIP,INTEGER,read-write,,current,enable(1):disable(2),The status of the IP protocol association with the Protocol-based VLAN entry.
.1.3.6.1.4.1.4526.10.1.2.14.2.1.5,FASTPATH-SWITCHING-MIB::agentProtocolGroupProtocolARP,INTEGER,read-write,,current,enable(1):disable(2),The status of the ARP protocol association with the Protocol-based VLAN entry.
.1.3.6.1.4.1.4526.10.1.2.14.2.1.6,FASTPATH-SWITCHING-MIB::agentProtocolGroupProtocolIPX,INTEGER,read-write,,current,enable(1):disable(2),The status of the IPX protocol association with the Protocol-based VLAN entry.
.1.3.6.1.4.1.4526.10.1.2.14.2.1.7,FASTPATH-SWITCHING-MIB::agentProtocolGroupStatus,INTEGER,read-write,,current,active(1):notInService(2):notReady(3):createAndGo(4):createAndWait(5):destroy(6),The status of the Protocol-based VLAN entry. active(1) - this entry is active destroy(6) - remove this entry
.1.3.6.1.4.1.4526.10.1.2.14.3,FASTPATH-SWITCHING-MIB::agentProtocolGroupPortTable,,not-accessible,,current,,A table of the switch's physical port config entries
.1.3.6.1.4.1.4526.10.1.2.14.3.1,FASTPATH-SWITCHING-MIB::agentProtocolGroupPortEntry,,not-accessible,agentProtocolGroupId:agentProtocolGroupPortIfIndex,current,,Switch's physical port config entry
.1.3.6.1.4.1.4526.10.1.2.14.3.1.1,FASTPATH-SWITCHING-MIB::agentProtocolGroupPortIfIndex,Integer32,read-only,,current,,The interface number of this instance.
.1.3.6.1.4.1.4526.10.1.2.14.3.1.2,FASTPATH-SWITCHING-MIB::agentProtocolGroupPortStatus,INTEGER,read-create,,current,active(1):notInService(2):notReady(3):createAndGo(4):createAndWait(5):destroy(6),The status of this entry. active(1) - the port is associated with this group createAndGo(4) - add the port to this group createAndWait(5) - add the port to this group destroy(6) - remove the port from this group
.1.3.6.1.4.1.4526.10.1.2.15,FASTPATH-SWITCHING-MIB::agentStpSwitchConfigGroup,,,,,,
.1.3.6.1.4.1.4526.10.1.2.15.1,FASTPATH-SWITCHING-MIB::agentStpConfigDigestKey,OCTET,read-only,,current,,The MST configuration digest key.
.1.3.6.1.4.1.4526.10.1.2.15.2,FASTPATH-SWITCHING-MIB::agentStpConfigFormatSelector,Unsigned32,read-only,,current,,The MST configuration format selector. A value other than 0 (zero) indicates non-support for the IEEE 802.1s standard.
.1.3.6.1.4.1.4526.10.1.2.15.3,FASTPATH-SWITCHING-MIB::agentStpConfigName,OCTET,read-write,,current,,The MST configuration name of at most 32 characters.
.1.3.6.1.4.1.4526.10.1.2.15.4,FASTPATH-SWITCHING-MIB::agentStpConfigRevision,Unsigned32,read-write,,current,,The MST configuration revision. The default value is 1.
.1.3.6.1.4.1.4526.10.1.2.15.5,FASTPATH-SWITCHING-MIB::agentStpForceVersion,INTEGER,read-write,,current,dot1d(1):dot1w(2):dot1s(3),The MST configuration force protocol version. The default version is dot1s.
.1.3.6.1.4.1.4526.10.1.2.15.6,FASTPATH-SWITCHING-MIB::agentStpAdminMode,INTEGER,read-write,,current,enable(1):disable(2),The spanning tree operational status. enable(1) - enables spanning tree operational status on the switch. disable(2) - disables spanning tree operational status on the switch. The default status is disabled.
.1.3.6.1.4.1.4526.10.1.2.15.7,FASTPATH-SWITCHING-MIB::agentStpPortTable,,not-accessible,,current,,STP port table.
.1.3.6.1.4.1.4526.10.1.2.15.7.1,FASTPATH-SWITCHING-MIB::agentStpPortEntry,,not-accessible,ifIndex,current,,STP port entry.
.1.3.6.1.4.1.4526.10.1.2.15.7.1.1,FASTPATH-SWITCHING-MIB::agentStpPortState,INTEGER,read-write,,current,enable(1):disable(2),The administrative STP state for the port. enable(1) - enables STP on the port. disable(2) - disables STP on the port. The default port STP state is enabled for the first 4095 ports and disabled for any ports beyond.
.1.3.6.1.4.1.4526.10.1.2.15.7.1.2,FASTPATH-SWITCHING-MIB::agentStpPortStatsMstpBpduRx,Counter32,read-only,,current,,The MSTP BPDUs received on a specific port.
.1.3.6.1.4.1.4526.10.1.2.15.7.1.3,FASTPATH-SWITCHING-MIB::agentStpPortStatsMstpBpduTx,Counter32,read-only,,current,,The MSTP BPDUs sent from a specific port.
.1.3.6.1.4.1.4526.10.1.2.15.7.1.4,FASTPATH-SWITCHING-MIB::agentStpPortStatsRstpBpduRx,Counter32,read-only,,current,,The RSTP BPDUs received on a specific port.
.1.3.6.1.4.1.4526.10.1.2.15.7.1.5,FASTPATH-SWITCHING-MIB::agentStpPortStatsRstpBpduTx,Counter32,read-only,,current,,The RSTP BPDUs sent from a specific port.
.1.3.6.1.4.1.4526.10.1.2.15.7.1.6,FASTPATH-SWITCHING-MIB::agentStpPortStatsStpBpduRx,Counter32,read-only,,current,,The STP BPDUs received on a specific port.
.1.3.6.1.4.1.4526.10.1.2.15.7.1.7,FASTPATH-SWITCHING-MIB::agentStpPortStatsStpBpduTx,Counter32,read-only,,current,,The STP BPDUs sent from a specific port.
.1.3.6.1.4.1.4526.10.1.2.15.7.1.8,FASTPATH-SWITCHING-MIB::agentStpPortUpTime,TimeTicks,read-only,,current,,Time since port was reset. It is displayed in days, hours, minutes, and seconds.
.1.3.6.1.4.1.4526.10.1.2.15.7.1.9,FASTPATH-SWITCHING-MIB::agentStpPortMigrationCheck,INTEGER,read-write,,current,false(0):true(1),Force the specified port to transmit RSTP or MSTP BPDU's. Supported values: false(0) - BPDUs are not to be transmitted. true(1) - BPDUs are to be transmitted A non-zero value indicates that BPDUs are to be sent on the specified port.
.1.3.6.1.4.1.4526.10.1.2.15.8,FASTPATH-SWITCHING-MIB::agentStpCstConfigGroup,,,,,,
.1.3.6.1.4.1.4526.10.1.2.15.8.1,FASTPATH-SWITCHING-MIB::agentStpCstHelloTime,Unsigned32,read-only,,current,,The MSTP root port hello time for the CIST.
.1.3.6.1.4.1.4526.10.1.2.15.8.2,FASTPATH-SWITCHING-MIB::agentStpCstMaxAge,Unsigned32,read-only,,current,,The MSTP root port max age for the CIST.
.1.3.6.1.4.1.4526.10.1.2.15.8.3,FASTPATH-SWITCHING-MIB::agentStpCstRegionalRootId,OCTET,read-only,,current,,The MSTP regional root identifier for the CIST.
.1.3.6.1.4.1.4526.10.1.2.15.8.4,FASTPATH-SWITCHING-MIB::agentStpCstRegionalRootPathCost,Unsigned32,read-only,,current,,The MSTP regional root path cost for the CIST.
.1.3.6.1.4.1.4526.10.1.2.15.8.5,FASTPATH-SWITCHING-MIB::agentStpCstRootFwdDelay,Unsigned32,read-only,,current,,The MSTP root port forward delay for the CIST.
.1.3.6.1.4.1.4526.10.1.2.15.8.6,FASTPATH-SWITCHING-MIB::agentStpCstBridgeFwdDelay,Unsigned32,read-write,,current,,The MSTP bridge forward delay for the CIST. The default value is 15.
.1.3.6.1.4.1.4526.10.1.2.15.8.7,FASTPATH-SWITCHING-MIB::agentStpCstBridgeHelloTime,Unsigned32,read-only,,current,,The MSTP bridge hello time for the CIST. The default value is 2. According to IEEE 802.1Q-REV 2005 updating hello time is disallowed
.1.3.6.1.4.1.4526.10.1.2.15.8.8,FASTPATH-SWITCHING-MIB::agentStpCstBridgeHoldTime,Unsigned32,read-only,,current,,The MSTP bridge hold time for the CIST.
.1.3.6.1.4.1.4526.10.1.2.15.8.9,FASTPATH-SWITCHING-MIB::agentStpCstBridgeMaxAge,Unsigned32,read-write,,current,,The MSTP bridge max age for the CIST. The default value is 20.
.1.3.6.1.4.1.4526.10.1.2.15.8.10,FASTPATH-SWITCHING-MIB::agentStpCstBridgeMaxHops,Unsigned32,read-write,,current,,The MSTP bridge max hops for the CIST. The default value is 20.
.1.3.6.1.4.1.4526.10.1.2.15.8.11,FASTPATH-SWITCHING-MIB::agentStpCstBridgePriority,Unsigned32,read-write,,current,,The MSTP bridge priority for the CIST. The default value is 32768.
.1.3.6.1.4.1.4526.10.1.2.15.8.12,FASTPATH-SWITCHING-MIB::agentStpCstBridgeHoldCount,Unsigned32,read-write,,current,,The MSTP bridge hold count for the CIST. This command sets the value of maximum bpdus that a bridge is allowed to send within a hello time window. The default value is 6.
.1.3.6.1.4.1.4526.10.1.2.15.9,FASTPATH-SWITCHING-MIB::agentStpCstPortTable,,not-accessible,,current,,CIST port table.
.1.3.6.1.4.1.4526.10.1.2.15.9.1,FASTPATH-SWITCHING-MIB::agentStpCstPortEntry,,not-accessible,ifIndex,current,,CIST port entry.
.1.3.6.1.4.1.4526.10.1.2.15.9.1.1,FASTPATH-SWITCHING-MIB::agentStpCstPortOperEdge,INTEGER,read-only,,current,enable(1):disable(2),The MSTP operational status of a specific port for the CIST.
.1.3.6.1.4.1.4526.10.1.2.15.9.1.2,FASTPATH-SWITCHING-MIB::agentStpCstPortOperPointToPoint,INTEGER,read-only,,current,true(1):false(2),The MSTP operational point to point mac of a specific port for the CIST.
.1.3.6.1.4.1.4526.10.1.2.15.9.1.3,FASTPATH-SWITCHING-MIB::agentStpCstPortTopologyChangeAck,INTEGER,read-only,,current,true(1):false(2),The MSTP topology change acknowledge for a specific port in the CIST.
.1.3.6.1.4.1.4526.10.1.2.15.9.1.4,FASTPATH-SWITCHING-MIB::agentStpCstPortEdge,INTEGER,read-write,,current,enable(1):disable(2),The administrative state of a specific port in CIST. enable(1) - enables the port. disable(2) - disables the port. The default port state is disabled.
.1.3.6.1.4.1.4526.10.1.2.15.9.1.5,FASTPATH-SWITCHING-MIB::agentStpCstPortForwardingState,INTEGER,read-only,,current,discarding(1):learning(2):forwarding(3):disabled(4):manualFwd(5):notParticipate(6),The MSTP forwarding state of a specific port in CIST.
.1.3.6.1.4.1.4526.10.1.2.15.9.1.6,FASTPATH-SWITCHING-MIB::agentStpCstPortId,OCTET,read-only,,current,,The MSTP port identifier of a specific port in CIST.
.1.3.6.1.4.1.4526.10.1.2.15.9.1.7,FASTPATH-SWITCHING-MIB::agentStpCstPortPathCost,Unsigned32,read-write,,current,,The MSTP port path cost in CIST. The default value will correspond to the recommendation specified in IEEE 802.1s Table 13-2 which varies depending upon link speed.
.1.3.6.1.4.1.4526.10.1.2.15.9.1.8,FASTPATH-SWITCHING-MIB::agentStpCstPortPriority,Unsigned32,read-write,,current,,The MSTP port priority in CIST. The priority is in the increments of 16. The default value is 128.
.1.3.6.1.4.1.4526.10.1.2.15.9.1.9,FASTPATH-SWITCHING-MIB::agentStpCstDesignatedBridgeId,OCTET,read-only,,current,,The MSTP designated bridge ID of a specific port in CIST.
.1.3.6.1.4.1.4526.10.1.2.15.9.1.10,FASTPATH-SWITCHING-MIB::agentStpCstDesignatedCost,Unsigned32,read-only,,current,,The MSTP designated cost of a specific port in CIST.
.1.3.6.1.4.1.4526.10.1.2.15.9.1.11,FASTPATH-SWITCHING-MIB::agentStpCstDesignatedPortId,OCTET,read-only,,current,,The MSTP designated port ID of a specific port in CIST.
.1.3.6.1.4.1.4526.10.1.2.15.9.1.12,FASTPATH-SWITCHING-MIB::agentStpCstExtPortPathCost,Unsigned32,read-write,,current,,The MSTP external port path cost in CIST. The default value varies depending upon the link speed.
.1.3.6.1.4.1.4526.10.1.2.15.9.1.13,FASTPATH-SWITCHING-MIB::agentStpCstPortBpduGuardEffect,INTEGER,read-only,,current,enable(1):disable(2),BPDU Guard Mode effect on the port. enable(1) - BPDU Guard Mode is enabled on the port. disable(2) - BPDU Guard Mode is disabled on the port.
.1.3.6.1.4.1.4526.10.1.2.15.9.1.14,FASTPATH-SWITCHING-MIB::agentStpCstPortBpduFilter,INTEGER,read-write,,current,enable(1):disable(2),This command sets BPDU Filter mode on the port. enable(1) - BPDU Filter Mode is enabled on the port. disable(2) - BPDU Filter Mode is disabled on the port.
.1.3.6.1.4.1.4526.10.1.2.15.9.1.15,FASTPATH-SWITCHING-MIB::agentStpCstPortBpduFlood,INTEGER,read-write,,current,enable(1):disable(2),This command sets BPDU Flood mode on the port. enable(1) - BPDU Flood Mode is enabled on the port. disable(2) - BPDU Flood Mode is disabled on the port.
.1.3.6.1.4.1.4526.10.1.2.15.9.1.16,FASTPATH-SWITCHING-MIB::agentStpCstPortAutoEdge,INTEGER,read-write,,current,enable(1):disable(2),This command sets the auto-edge mode of the port which enables it to become an edge port if it does not see BPDUs for some duration. enable(1) - enables the auto-edge mode for the port. disable(2) - disables the auto-edge mode for the port. The default auto-edge mode is disabled.
.1.3.6.1.4.1.4526.10.1.2.15.9.1.17,FASTPATH-SWITCHING-MIB::agentStpCstPortRootGuard,INTEGER,read-write,,current,enable(1):disable(2),This command sets a port to discard any superior information received by the port and thus protect against root of the device from changing.The port gets put into discarding state and does not forward any packets. enable(1) - enables the root-guard mode for the port. disable(2) - disables the root-guard mode for the port. The default root-guard mode is disabled.
.1.3.6.1.4.1.4526.10.1.2.15.9.1.18,FASTPATH-SWITCHING-MIB::agentStpCstPortTCNGuard,INTEGER,read-write,,current,enable(1):disable(2),This command restricts the port from propagating any topology change information received through that port. enable(1) - enables the tcn-guard mode for the port. disable(2) - disables the tcn-guard mode for the port. The default tcn-guard mode is disabled.
.1.3.6.1.4.1.4526.10.1.2.15.9.1.19,FASTPATH-SWITCHING-MIB::agentStpCstPortLoopGuard,INTEGER,read-write,,current,enable(1):disable(2),This command enables loop guard on this port. This setting applies to all Spanning Tree instances of which this port is a member. enable(1) - enables the loop guard mode for the port. disable(2) - disables the loop guard mode for the port. The default loop-guard mode is disabled.
.1.3.6.1.4.1.4526.10.1.2.15.10,FASTPATH-SWITCHING-MIB::agentStpMstTable,,not-accessible,,current,,MST table.
.1.3.6.1.4.1.4526.10.1.2.15.10.1,FASTPATH-SWITCHING-MIB::agentStpMstEntry,,not-accessible,agentStpMstId,current,,MST entry.
.1.3.6.1.4.1.4526.10.1.2.15.10.1.1,FASTPATH-SWITCHING-MIB::agentStpMstId,Unsigned32,read-only,,current,,The MSTP instance ID.
.1.3.6.1.4.1.4526.10.1.2.15.10.1.2,FASTPATH-SWITCHING-MIB::agentStpMstBridgePriority,Unsigned32,read-write,,current,,The MSTP bridge priority in a specific instance. The priority is in the increments of 4096. The recommended default value is 32768.
.1.3.6.1.4.1.4526.10.1.2.15.10.1.3,FASTPATH-SWITCHING-MIB::agentStpMstBridgeIdentifier,OCTET,read-only,,current,,The MSTP bridge identifier in a specific instance.
.1.3.6.1.4.1.4526.10.1.2.15.10.1.4,FASTPATH-SWITCHING-MIB::agentStpMstDesignatedRootId,OCTET,read-only,,current,,The MSTP designated root bridge identifier in a specific instance.
.1.3.6.1.4.1.4526.10.1.2.15.10.1.5,FASTPATH-SWITCHING-MIB::agentStpMstRootPathCost,Unsigned32,read-only,,current,,The MSTP root path cost in a specific instance.
.1.3.6.1.4.1.4526.10.1.2.15.10.1.6,FASTPATH-SWITCHING-MIB::agentStpMstRootPortId,OCTET,read-only,,current,,The MSTP root port ID in a specific instance.
.1.3.6.1.4.1.4526.10.1.2.15.10.1.7,FASTPATH-SWITCHING-MIB::agentStpMstTimeSinceTopologyChange,TimeTicks,read-only,,current,,The MSTP time since the last topology change in a specific instance.
.1.3.6.1.4.1.4526.10.1.2.15.10.1.8,FASTPATH-SWITCHING-MIB::agentStpMstTopologyChangeCount,Counter32,read-only,,current,,The MSTP count of topology changes in a specific instance.
.1.3.6.1.4.1.4526.10.1.2.15.10.1.9,FASTPATH-SWITCHING-MIB::agentStpMstTopologyChangeParm,INTEGER,read-only,,current,true(1):false(2),The MSTP topology change parameter in a specific instance.
.1.3.6.1.4.1.4526.10.1.2.15.10.1.10,FASTPATH-SWITCHING-MIB::agentStpMstRowStatus,INTEGER,read-create,,current,active(1):notInService(2):notReady(3):createAndGo(4):createAndWait(5):destroy(6),The MSTP instance status. Supported values: active(1) - valid instance. createAndGo(4) - used to create a new instance. destroy(6) - removes an instance.
.1.3.6.1.4.1.4526.10.1.2.15.11,FASTPATH-SWITCHING-MIB::agentStpMstPortTable,,not-accessible,,current,,MST port table.
.1.3.6.1.4.1.4526.10.1.2.15.11.1,FASTPATH-SWITCHING-MIB::agentStpMstPortEntry,,not-accessible,agentStpMstId:ifIndex,current,,MST port entry.
.1.3.6.1.4.1.4526.10.1.2.15.11.1.1,FASTPATH-SWITCHING-MIB::agentStpMstPortForwardingState,INTEGER,read-only,,current,discarding(1):learning(2):forwarding(3):disabled(4):manualFwd(5):notParticipate(6),The MSTP forwarding state of a specific port in a specific instance.
.1.3.6.1.4.1.4526.10.1.2.15.11.1.2,FASTPATH-SWITCHING-MIB::agentStpMstPortId,OCTET,read-only,,current,,The MSTP port identifier of a specific port in a specific instance.
.1.3.6.1.4.1.4526.10.1.2.15.11.1.3,FASTPATH-SWITCHING-MIB::agentStpMstPortPathCost,Unsigned32,read-write,,current,,The MSTP port path cost in a specific instance. The default value will correspond to the recommendation specified in IEEE 802.1s Table 13-2 which varies depending upon link speed.
.1.3.6.1.4.1.4526.10.1.2.15.11.1.4,FASTPATH-SWITCHING-MIB::agentStpMstPortPriority,Unsigned32,read-write,,current,,The MSTP port priority in a specific instance. The priority is in the increments of 16. The default value is 128.
.1.3.6.1.4.1.4526.10.1.2.15.11.1.5,FASTPATH-SWITCHING-MIB::agentStpMstDesignatedBridgeId,OCTET,read-only,,current,,The MSTP designated bridge ID of a specific port in a specific instance.
.1.3.6.1.4.1.4526.10.1.2.15.11.1.6,FASTPATH-SWITCHING-MIB::agentStpMstDesignatedCost,Unsigned32,read-only,,current,,The MSTP designated cost of a specific port in a specific instance.
.1.3.6.1.4.1.4526.10.1.2.15.11.1.7,FASTPATH-SWITCHING-MIB::agentStpMstDesignatedPortId,OCTET,read-only,,current,,The MSTP designated port ID of a specific port in a specific instance.
.1.3.6.1.4.1.4526.10.1.2.15.11.1.8,FASTPATH-SWITCHING-MIB::agentStpMstPortLoopInconsistentState,INTEGER,read-only,,current,false(0):true(1),The loop inconsistent state of a specific port in a specific instance. This value can only report as true(1) when loop guard is enabled on the port and the port has transitioned from blocking state in this MST instance.
.1.3.6.1.4.1.4526.10.1.2.15.11.1.9,FASTPATH-SWITCHING-MIB::agentStpMstPortTransitionsIntoLoopInconsistentState,Counter32,read-only,,current,,The number of times this interface has transitioned into loop inconsistent state.
.1.3.6.1.4.1.4526.10.1.2.15.11.1.10,FASTPATH-SWITCHING-MIB::agentStpMstPortTransitionsOutOfLoopInconsistentState,Counter32,read-only,,current,,The number of times this interface has transitioned out of loop inconsistent state.
.1.3.6.1.4.1.4526.10.1.2.15.12,FASTPATH-SWITCHING-MIB::agentStpMstVlanTable,,not-accessible,,current,,MST VLAN table.
.1.3.6.1.4.1.4526.10.1.2.15.12.1,FASTPATH-SWITCHING-MIB::agentStpMstVlanEntry,,not-accessible,agentStpMstId:dot1qVlanIndex,current,,MST VLAN entry.
.1.3.6.1.4.1.4526.10.1.2.15.12.1.1,FASTPATH-SWITCHING-MIB::agentStpMstVlanRowStatus,INTEGER,read-create,,current,active(1):notInService(2):notReady(3):createAndGo(4):createAndWait(5):destroy(6),The association status of an MSTP instance and a VLAN. Supported values: active(1) - valid association between an MSTP instance and a VLAN. createAndGo(4) - used to create a new association between an MSTP instance and a VLAN. destroy(6) - removes the association between an MSTP instance and a VLAN.
.1.3.6.1.4.1.4526.10.1.2.15.13,FASTPATH-SWITCHING-MIB::agentStpBpduGuardMode,INTEGER,read-write,,current,enable(1):disable(2),The spanning tree BPDU Guard Mode. enable(1) - enables BPDU Guard Mode on the switch. disable(2) - disables BPDU Guard Mode on the switch. The default status is disabled.
.1.3.6.1.4.1.4526.10.1.2.15.14,FASTPATH-SWITCHING-MIB::agentStpBpduFilterDefault,INTEGER,read-write,,current,enable(1):disable(2),The spanning tree BPDU Filter Mode, it enables BPDU Filter on all edge ports. enable(1) - enables BPDU Filter Mode on the switch. disable(2) - disables BPDU Filter Mode on the switch. The default status is disabled.
.1.3.6.1.4.1.4526.10.1.2.16,FASTPATH-SWITCHING-MIB::agentAuthenticationGroup,,,,,,
.1.3.6.1.4.1.4526.10.1.2.16.1,FASTPATH-SWITCHING-MIB::agentAuthenticationListCreate,OCTET,read-write,,current,,Authentication List Create If set to a non empty string, creates a new Authentication List for configuration.
.1.3.6.1.4.1.4526.10.1.2.16.2,FASTPATH-SWITCHING-MIB::agentAuthenticationListTable,,not-accessible,,current,,MST VLAN table.
.1.3.6.1.4.1.4526.10.1.2.16.2.1,FASTPATH-SWITCHING-MIB::agentAuthenticationListEntry,,not-accessible,agentAuthenticationListIndex,current,,MST VLAN entry.
.1.3.6.1.4.1.4526.10.1.2.16.2.1.1,FASTPATH-SWITCHING-MIB::agentAuthenticationListIndex,Unsigned32,not-accessible,,current,,Authenticaiton List Index Unique number used for indexing into this table.
.1.3.6.1.4.1.4526.10.1.2.16.2.1.2,FASTPATH-SWITCHING-MIB::agentAuthenticationListName,OCTET,read-only,,current,,Authenticaiton List Name Unique name used to identify the Authentication List from other tables.
.1.3.6.1.4.1.4526.10.1.2.16.2.1.3,FASTPATH-SWITCHING-MIB::agentAuthenticationListMethod1,INTEGER,read-write,,current,local(1):radius(2):reject(3):tacacs(4),Authenticion List Method 1 Configures the first authentication method to use when this list is specified.
.1.3.6.1.4.1.4526.10.1.2.16.2.1.4,FASTPATH-SWITCHING-MIB::agentAuthenticationListMethod2,INTEGER,read-write,,current,undefined(1):local(2):radius(3):reject(4):tacacs(5),Authenticion List Method 2 Configures the second authentication method to use when this list is specified.
.1.3.6.1.4.1.4526.10.1.2.16.2.1.5,FASTPATH-SWITCHING-MIB::agentAuthenticationListMethod3,INTEGER,read-write,,current,undefined(1):local(2):radius(3):reject(4):tacacs(5),Authenticion List Method 3 Configures the third authentication method to use when this list is specified.
.1.3.6.1.4.1.4526.10.1.2.16.2.1.6,FASTPATH-SWITCHING-MIB::agentAuthenticationListStatus,INTEGER,read-write,,current,active(1):notInService(2):notReady(3):createAndGo(4):createAndWait(5):destroy(6),The status of the Authentication List. Supported values: active(1) - indicates a valid Authenticaiton List destroy(6) - removes the Authentication List.
.1.3.6.1.4.1.4526.10.1.2.16.2.1.7,FASTPATH-SWITCHING-MIB::agentAuthenticationListMethod4,INTEGER,read-write,,current,undefined(1):local(2):radius(3):reject(4):tacacs(5),Authenticion List Method 4 Configures the fourth authentication method to use when this list is specified.
.1.3.6.1.4.1.4526.10.1.2.16.3,FASTPATH-SWITCHING-MIB::agentUserConfigDefaultAuthenticationList,OCTET,read-write,,current,,Default Authentication List This object configures which authentication list to use for users which do not have an Authentication List configured. The list must be configured before setting.
.1.3.6.1.4.1.4526.10.1.2.16.4,FASTPATH-SWITCHING-MIB::agentUserAuthenticationConfigTable,,not-accessible,,current,,User Authentication Config Table
.1.3.6.1.4.1.4526.10.1.2.16.4.1,FASTPATH-SWITCHING-MIB::agentUserAuthenticationConfigEntry,,not-accessible,,current,,User Authentication Config Entry
.1.3.6.1.4.1.4526.10.1.2.16.4.1.1,FASTPATH-SWITCHING-MIB::agentUserAuthenticationList,OCTET,read-write,,current,,User Authentication List This object configures which authentication list to use for this user. The list must be configured before setting.
.1.3.6.1.4.1.4526.10.1.2.16.5,FASTPATH-SWITCHING-MIB::agentUserPortConfigTable,,not-accessible,,current,,User Port Config Table
.1.3.6.1.4.1.4526.10.1.2.16.5.1,FASTPATH-SWITCHING-MIB::agentUserPortConfigEntry,,not-accessible,,current,,User Port Config Entry
.1.3.6.1.4.1.4526.10.1.2.16.5.1.1,FASTPATH-SWITCHING-MIB::agentUserPortSecurity,OCTET,read-write,,current,,User Port Port Security This object configures which ports the user has access to. Ports are indexed based on dot1dBasePort entries in dot1dBasePortTable.
.1.3.6.1.4.1.4526.10.1.2.17,FASTPATH-SWITCHING-MIB::agentClassOfServiceGroup,,,,,,
.1.3.6.1.4.1.4526.10.1.2.17.1,FASTPATH-SWITCHING-MIB::agentClassOfServicePortTable,,not-accessible,,current,,A table that contains information about the 802.1p priority mapping to traffic class priority queue for every physical port.
.1.3.6.1.4.1.4526.10.1.2.17.1.1,FASTPATH-SWITCHING-MIB::agentClassOfServicePortEntry,,not-accessible,ifIndex:agentClassOfServicePortPriority,current,,A 802.1p priority mapped to a traffic class priority queue.
.1.3.6.1.4.1.4526.10.1.2.17.1.1.1,FASTPATH-SWITCHING-MIB::agentClassOfServicePortPriority,INTEGER,not-accessible,,current,,The Priority value determined for the received frame. This value is equivalent to the priority indicated in the tagged frame received, or one of the evaluated priorities, determined according to the media-type. For untagged frames received from Ethernet media, this value is equal to the dot1dPortDefaultUserPriority value for the ingress port.
.1.3.6.1.4.1.4526.10.1.2.17.1.1.2,FASTPATH-SWITCHING-MIB::agentClassOfServicePortClass,INTEGER,read-write,,current,,Traffic class priority queue the received frame is mapped to.
.1.3.6.1.4.1.4526.10.1.2.19,FASTPATH-SWITCHING-MIB::agentHTTPConfigGroup,,,,,,
.1.3.6.1.4.1.4526.10.1.2.19.1,FASTPATH-SWITCHING-MIB::agentHTTPWebMode,INTEGER,read-write,,current,enable(1):disable(2),Configures the HTTP server admin mode
.1.3.6.1.4.1.4526.10.1.2.19.2,FASTPATH-SWITCHING-MIB::agentHTTPJavaMode,INTEGER,read-write,,current,enable(1):disable(2),Configures the use of the Java interface through Web connections.
.1.3.6.1.4.1.4526.10.1.2.19.3,FASTPATH-SWITCHING-MIB::agentHTTPMaxSessions,Integer32,read-write,,current,,Configures the maximum number of allowable HTTP sessions. The default value is 16.
.1.3.6.1.4.1.4526.10.1.2.19.4,FASTPATH-SWITCHING-MIB::agentHTTPHardTimeout,Integer32,read-write,,current,,Configures the hard timeout for HTTP sessions in hours. The default value is 24 hours.
.1.3.6.1.4.1.4526.10.1.2.19.5,FASTPATH-SWITCHING-MIB::agentHTTPSoftTimeout,Integer32,read-write,,current,,Configures the soft (activity) timeout for HTTP sessions in minutes. The default value is 5 minutes.
.1.3.6.1.4.1.4526.10.1.2.20,FASTPATH-SWITCHING-MIB::agentAutoInstallConfigGroup,,,,,,
.1.3.6.1.4.1.4526.10.1.2.20.1,FASTPATH-SWITCHING-MIB::agentAutoinstallMode,INTEGER,read-write,,current,enable(1):disable(2),Enable/Disable Autoinstall on device.
.1.3.6.1.4.1.4526.10.1.2.20.2,FASTPATH-SWITCHING-MIB::agentAutoinstallAutosaveMode,INTEGER,read-write,,current,enable(1):disable(2),Enable/Disable Auto Save of downloaded configuration on device.
.1.3.6.1.4.1.4526.10.1.2.20.3,FASTPATH-SWITCHING-MIB::agentAutoinstallUnicastRetryCount,Integer32,read-write,,current,,Sets number of unicast TFTP attempts for configuration file.
.1.3.6.1.4.1.4526.10.1.2.20.4,FASTPATH-SWITCHING-MIB::agentAutoinstallStatus,OCTET,read-only,,current,,Display current Autoinstall status on device.
.1.3.6.1.4.1.4526.10.1.3,FASTPATH-SWITCHING-MIB::agentSystemGroup,,,,,,
.1.3.6.1.4.1.4526.10.1.3.1,FASTPATH-SWITCHING-MIB::agentSaveConfig,INTEGER,read-write,,current,enable(1):disable(2),enable(1) will initiate an configuration save to nvram. Status is returned by the object agentSaveConfigStatus.
.1.3.6.1.4.1.4526.10.1.3.2,FASTPATH-SWITCHING-MIB::agentClearConfig,INTEGER,read-write,,current,enable(1):disable(2),clear config to factory defaults
.1.3.6.1.4.1.4526.10.1.3.3,FASTPATH-SWITCHING-MIB::agentClearLags,INTEGER,read-write,,current,enable(1):disable(2),clear lag configuration
.1.3.6.1.4.1.4526.10.1.3.4,FASTPATH-SWITCHING-MIB::agentClearLoginSessions,INTEGER,read-write,,current,enable(1):disable(2),close all telnet sessions
.1.3.6.1.4.1.4526.10.1.3.5,FASTPATH-SWITCHING-MIB::agentClearPasswords,INTEGER,read-write,,current,enable(1):disable(2),reset passwords
.1.3.6.1.4.1.4526.10.1.3.6,FASTPATH-SWITCHING-MIB::agentClearPortStats,INTEGER,read-write,,current,enable(1):disable(2),clear all port statistics
.1.3.6.1.4.1.4526.10.1.3.7,FASTPATH-SWITCHING-MIB::agentClearSwitchStats,INTEGER,read-write,,current,enable(1):disable(2),clear all switch statistics
.1.3.6.1.4.1.4526.10.1.3.8,FASTPATH-SWITCHING-MIB::agentClearTrapLog,INTEGER,read-write,,current,enable(1):disable(2),clear trap log
.1.3.6.1.4.1.4526.10.1.3.9,FASTPATH-SWITCHING-MIB::agentClearVlan,INTEGER,read-write,,current,enable(1):disable(2),clear vlan entries
.1.3.6.1.4.1.4526.10.1.3.10,FASTPATH-SWITCHING-MIB::agentResetSystem,INTEGER,read-write,,current,enable(1):disable(2),Resets the switch. This object is not valid for stacking platforms.
.1.3.6.1.4.1.4526.10.1.3.11,FASTPATH-SWITCHING-MIB::agentSaveConfigStatus,INTEGER,read-only,,current,notInitiated(1):savingInProcess(2):savingComplete(3):savingFailed(4),Indicates the current status of an save configuration request.
.1.3.6.1.4.1.4526.10.1.3.12,FASTPATH-SWITCHING-MIB::agentStartupConfigErase,INTEGER,read-write,,current,erase(1),Erase the text-based configuration file stored in non-volatile memory.On read returns 0.
.1.3.6.1.4.1.4526.10.1.4,FASTPATH-SWITCHING-MIB::agentCableTesterGroup,,,,,,
.1.3.6.1.4.1.4526.10.1.4.1,FASTPATH-SWITCHING-MIB::agentCableTesterStatus,INTEGER,read-write,,current,active(1):success(2):failure(3):uninitialized(4),Status of the Virtual Cable Tester active(1) - cable testing is in progress. Set to this value to start the test. success(2) - A successful test was performed. Cannot be set. failure(3) - A failure was encountered during the test. Cannot be set. uninitialized(4) - No test has been performed yet. Cannot be set.
.1.3.6.1.4.1.4526.10.1.4.2,FASTPATH-SWITCHING-MIB::agentCableTesterIfIndex,Unsigned32,read-write,,current,,Determines on which port to perform the cable test. Limited to copper based ports.
.1.3.6.1.4.1.4526.10.1.4.3,FASTPATH-SWITCHING-MIB::agentCableTesterCableStatus,INTEGER,read-only,,current,normal(1):open(2):short(3):unknown(4),Indicates the results of the Cable Test. normal(1) - The cable is working correctly. open(2) - The cable is disconnected or there is a faulty connector. short(3) - There is an electrical short in the cable. unknown(4) - No test has been performed yet, or a test is currently in progress.
.1.3.6.1.4.1.4526.10.1.4.4,FASTPATH-SWITCHING-MIB::agentCableTesterMinimumCableLength,Unsigned32,read-only,,current,,The estimated length of the cable in meters. This value indicates the shortest length estimated. This object will return 0 if agentCableTesterStatus is not success(2) or the cable length is unknown.
.1.3.6.1.4.1.4526.10.1.4.5,FASTPATH-SWITCHING-MIB::agentCableTesterMaximumCableLength,Unsigned32,read-only,,current,,The estimated length of the cable in meters. This value indicates the longest length estimated. This object will return 0 if agentCableTesterStatus is not success(2) or the cable length is unknown.
.1.3.6.1.4.1.4526.10.1.4.6,FASTPATH-SWITCHING-MIB::agentCableTesterCableFailureLocation,Unsigned32,read-only,,current,,The estimated distance in meters from the end of the cable to the failure location. This object will return 0 if agentCableTesterStatus is not success(2).
.1.3.6.1.4.1.4526.10.2,FASTPATH-ROUTING-MIB::fastPathRouting,,,,,,The Netgear Private MIB for FastPath Routing
.1.3.6.1.4.1.4526.10.2.1,FASTPATH-ROUTING-MIB::agentSwitchArpGroup,,,,,,
.1.3.6.1.4.1.4526.10.2.1.1,FASTPATH-ROUTING-MIB::agentSwitchArpAgeoutTime,Integer32,read-write,,current,,Configures the ARP entry ageout time in seconds. Allowable range: 15-21600
.1.3.6.1.4.1.4526.10.2.1.2,FASTPATH-ROUTING-MIB::agentSwitchArpResponseTime,Integer32,read-write,,current,,Configures the ARP request response timeout in seconds. Allowable range: 1-10
.1.3.6.1.4.1.4526.10.2.1.3,FASTPATH-ROUTING-MIB::agentSwitchArpMaxRetries,Integer32,read-write,,current,,Configures the ARP count of maximum request for retries. Allowable range: 0-10
.1.3.6.1.4.1.4526.10.2.1.4,FASTPATH-ROUTING-MIB::agentSwitchArpCacheSize,Integer32,read-write,,current,,Configures the ARP maximum number of entries in the cache. Allowable range is platform-specific.
.1.3.6.1.4.1.4526.10.2.1.5,FASTPATH-ROUTING-MIB::agentSwitchArpDynamicRenew,INTEGER,read-write,,current,enable(1):disable(2),This indicates the current setting of ARP dynamic renew mode. 
.1.3.6.1.4.1.4526.10.2.1.6,FASTPATH-ROUTING-MIB::agentSwitchArpTotalEntryCountCurrent,Gauge32,read-only,,current,,Current number of entries in the ARP cache.
.1.3.6.1.4.1.4526.10.2.1.7,FASTPATH-ROUTING-MIB::agentSwitchArpTotalEntryCountPeak,Gauge32,read-only,,current,,Peak number of entries recorded in the ARP cache over time. This value is restarted whenever the ARP cache size is changed.
.1.3.6.1.4.1.4526.10.2.1.8,FASTPATH-ROUTING-MIB::agentSwitchArpStaticEntryCountCurrent,Gauge32,read-only,,current,,Current number of configured static ARP entries.
.1.3.6.1.4.1.4526.10.2.1.9,FASTPATH-ROUTING-MIB::agentSwitchArpStaticEntryCountMax,Integer32,read-only,,current,,Maximum number of configurable static ARP entries.
.1.3.6.1.4.1.4526.10.2.1.10,FASTPATH-ROUTING-MIB::agentSwitchArpTable,,not-accessible,,obsolete,,This table augments the MIB-II ipNetToMediaTable by providing per-interface ARP entry information.
.1.3.6.1.4.1.4526.10.2.1.10.1,FASTPATH-ROUTING-MIB::agentSwitchArpEntry,,not-accessible,agentSwitchArpIpAddress,obsolete,,
.1.3.6.1.4.1.4526.10.2.1.10.1.1,FASTPATH-ROUTING-MIB::agentSwitchArpAge,TimeTicks,read-only,,obsolete,,This defines the time (in seconds) since the ARP entry  was last refreshed. This value is 0 for ARP entries of type local(1) or static(3), since these entries are  not subject to aging.
.1.3.6.1.4.1.4526.10.2.1.10.1.2,FASTPATH-ROUTING-MIB::agentSwitchArpIpAddress,IpAddress,read-only,,obsolete,,The IP Address assigned to each interface.
.1.3.6.1.4.1.4526.10.2.1.10.1.3,FASTPATH-ROUTING-MIB::agentSwitchArpMacAddress,OCTET,read-create,,obsolete,,The hardware MAX Address that each interface maps to.
.1.3.6.1.4.1.4526.10.2.1.10.1.4,FASTPATH-ROUTING-MIB::agentSwitchArpInterface,Integer32,read-create,,obsolete,,The Associated IfIndex which identified the ARP Entry.
.1.3.6.1.4.1.4526.10.2.1.10.1.5,FASTPATH-ROUTING-MIB::agentSwitchArpType,INTEGER,read-only,,obsolete,local(1):gateway(2):static(3):dynamic(4),The type of ARP entry.
.1.3.6.1.4.1.4526.10.2.1.10.1.6,FASTPATH-ROUTING-MIB::agentSwitchArpStatus,INTEGER,read-write,,obsolete,active(1):notInService(2):notReady(3):createAndGo(4):createAndWait(5):destroy(6),The status of this ARP entry. Setting this object destroy will remove the entry.
.1.3.6.1.4.1.4526.10.2.1.11,FASTPATH-ROUTING-MIB::agentSwitchLocalProxyArpTable,,not-accessible,,current,,This table contains the per-interface configuration parameters for Local Proxy Arp.
.1.3.6.1.4.1.4526.10.2.1.11.1,FASTPATH-ROUTING-MIB::agentSwitchLocalProxyArpEntry,,not-accessible,ifIndex,current,,Represents a logical row in the agentSwitchLocalProxyArpTable
.1.3.6.1.4.1.4526.10.2.1.11.1.1,FASTPATH-ROUTING-MIB::agentSwitchLocalProxyArpMode,INTEGER,read-write,,current,enable(1):disable(2),The Local Proxy Arp Mode for the interface.
.1.3.6.1.4.1.4526.10.2.1.12,FASTPATH-ROUTING-MIB::agentSwitchIntfArpTable,,not-accessible,,current,,This table augments the MIB-II ipNetToMediaTable by providing per-interface ARP entry information.
.1.3.6.1.4.1.4526.10.2.1.12.1,FASTPATH-ROUTING-MIB::agentSwitchIntfArpEntry,,not-accessible,agentSwitchIntfArpIpAddress:agentSwitchIntfArpIfIndex,current,,
.1.3.6.1.4.1.4526.10.2.1.12.1.1,FASTPATH-ROUTING-MIB::agentSwitchIntfArpIpAddress,IpAddress,not-accessible,,current,,The Type of Address assigned to this interface.
.1.3.6.1.4.1.4526.10.2.1.12.1.2,FASTPATH-ROUTING-MIB::agentSwitchIntfArpIfIndex,Integer32,not-accessible,,current,,The Associated IfIndex which identified the ARP Entry. This value must be specified for static ARP entries on an unnumbered interface
.1.3.6.1.4.1.4526.10.2.1.12.1.3,FASTPATH-ROUTING-MIB::agentSwitchIntfArpAge,TimeTicks,read-only,,current,,This defines the time (in seconds) since the ARP entry  was last refreshed. This value is 0 for ARP entries of type local(1) or static(3), since these entries are  not subject to aging.
.1.3.6.1.4.1.4526.10.2.1.12.1.4,FASTPATH-ROUTING-MIB::agentSwitchIntfArpMacAddress,OCTET,read-create,,current,,The hardware MAX Address that each interface maps to.
.1.3.6.1.4.1.4526.10.2.1.12.1.5,FASTPATH-ROUTING-MIB::agentSwitchIntfArpType,INTEGER,read-only,,current,local(1):gateway(2):static(3):dynamic(4),The type of ARP entry.
.1.3.6.1.4.1.4526.10.2.1.12.1.6,FASTPATH-ROUTING-MIB::agentSwitchIntfArpStatus,INTEGER,read-create,,current,active(1):notInService(2):notReady(3):createAndGo(4):createAndWait(5):destroy(6),The status of this ARP entry. Setting this object destroy will remove the entry.
.1.3.6.1.4.1.4526.10.2.2,FASTPATH-ROUTING-MIB::agentSwitchIpGroup,,,,,,
.1.3.6.1.4.1.4526.10.2.2.1,FASTPATH-ROUTING-MIB::agentSwitchIpRoutingMode,INTEGER,read-write,,current,enable(1):disable(2),Administratively enables/disables routing on the switch.
.1.3.6.1.4.1.4526.10.2.2.3,FASTPATH-ROUTING-MIB::agentSwitchIpInterfaceTable,,not-accessible,,current,,
.1.3.6.1.4.1.4526.10.2.2.3.1,FASTPATH-ROUTING-MIB::agentSwitchIpInterfaceEntry,,not-accessible,agentSwitchIpInterfaceIfIndex,current,,
.1.3.6.1.4.1.4526.10.2.2.3.1.1,FASTPATH-ROUTING-MIB::agentSwitchIpInterfaceIfIndex,Integer32,read-only,,current,,The IfIndex associated with this instance.
.1.3.6.1.4.1.4526.10.2.2.3.1.2,FASTPATH-ROUTING-MIB::agentSwitchIpInterfaceIpAddress,IpAddress,read-write,,current,,The IpAddress assigned to this interface. When setting this value, the value of agentSwitchIpInterfaceNetMask must be set at the same time.
.1.3.6.1.4.1.4526.10.2.2.3.1.3,FASTPATH-ROUTING-MIB::agentSwitchIpInterfaceNetMask,IpAddress,read-write,,current,,The NetMask assigned to this interface. When setting this value, the  value of agentSwitchIpInterfaceIpAddress must be set at the same time.
.1.3.6.1.4.1.4526.10.2.2.3.1.4,FASTPATH-ROUTING-MIB::agentSwitchIpInterfaceClearIp,INTEGER,read-write,,current,enable(1):disable(2),Sets the interfaces IpAddress and NetMask back to 0.0.0.0
.1.3.6.1.4.1.4526.10.2.2.3.1.5,FASTPATH-ROUTING-MIB::agentSwitchIpInterfaceRoutingMode,INTEGER,read-write,,current,enable(1):disable(2),Enables or disables routing for this interface.
.1.3.6.1.4.1.4526.10.2.2.3.1.6,FASTPATH-ROUTING-MIB::agentSwitchIpInterfaceProxyARPMode,INTEGER,read-write,,current,enable(1):disable(2),Enables or disables Proxy ARP for this interface.
.1.3.6.1.4.1.4526.10.2.2.3.1.7,FASTPATH-ROUTING-MIB::agentSwitchIpInterfaceMtuValue,Unsigned32,read-write,,current,,Configures the MTU value for this interface. If the value returned is 0 this interface is not enabled for routing. It is not valid to set this value to 0 if routing is enabled.
.1.3.6.1.4.1.4526.10.2.2.3.1.8,FASTPATH-ROUTING-MIB::agentSwitchIpInterfaceBandwidth,Unsigned32,read-write,,current,,Configures the Bandwidth value for this interface. If the value returned is 0 bandwidth for this interface is not Configured.
.1.3.6.1.4.1.4526.10.2.2.3.1.9,FASTPATH-ROUTING-MIB::agentSwitchIpInterfaceUnnumberedIfIndex,Integer32,read-only,,current,,If this object is non-zero, it indicates that the interface is unnumbered, and specifies which interface the address is borrowed from.
.1.3.6.1.4.1.4526.10.2.2.3.1.10,FASTPATH-ROUTING-MIB::agentSwitchIpInterfaceIcmpUnreachables,INTEGER,read-write,,current,enable(1):disable(2),If this object is enable, it indicates that ICMP unreachables can be sent on this interface.
.1.3.6.1.4.1.4526.10.2.2.3.1.11,FASTPATH-ROUTING-MIB::agentSwitchIpInterfaceIcmpRedirects,INTEGER,read-write,,current,enable(1):disable(2),If this object is enable and agentSwitchIpIcmpRedirectsMode is also enable ICMP Redirects can be sent on this interface.
.1.3.6.1.4.1.4526.10.2.2.4,FASTPATH-ROUTING-MIB::agentSwitchIpRouterDiscoveryTable,,not-accessible,,current,,There is no global administrative flag for router discovery. The global routing flag (agentSwitchIpRoutingMode) will be used for this purpose. If routing is disabled, router discovery is disabled as well.
.1.3.6.1.4.1.4526.10.2.2.4.1,FASTPATH-ROUTING-MIB::agentSwitchIpRouterDiscoveryEntry,,not-accessible,agentSwitchIpRouterDiscoveryIfIndex,current,,
.1.3.6.1.4.1.4526.10.2.2.4.1.1,FASTPATH-ROUTING-MIB::agentSwitchIpRouterDiscoveryIfIndex,Integer32,read-only,,current,,Interface Number to configure Router Discovery on.
.1.3.6.1.4.1.4526.10.2.2.4.1.2,FASTPATH-ROUTING-MIB::agentSwitchIpRouterDiscoveryAdvertiseMode,INTEGER,read-write,,current,enable(1):disable(2),Enable or disable router discovery on the interface.
.1.3.6.1.4.1.4526.10.2.2.4.1.3,FASTPATH-ROUTING-MIB::agentSwitchIpRouterDiscoveryMaxAdvertisementInterval,Integer32,read-write,,current,,Maximum time allowed between sending router advertisements  from the interface.
.1.3.6.1.4.1.4526.10.2.2.4.1.4,FASTPATH-ROUTING-MIB::agentSwitchIpRouterDiscoveryMinAdvertisementInterval,Integer32,read-write,,current,,Minimum time allowed between sending router advertisements from the interface.  This value must be less than or equal to  agentSwitchIpRouterDiscoveryMaxAdvertisementInterval.
.1.3.6.1.4.1.4526.10.2.2.4.1.5,FASTPATH-ROUTING-MIB::agentSwitchIpRouterDiscoveryAdvertisementLifetime,Integer32,read-write,,current,,Value of lifetime field of router advertsisement sent from  the interface.  This value must be greater than or equal to  agentSwitchIpRouterDiscoveryMaxAdvertisementInterval.
.1.3.6.1.4.1.4526.10.2.2.4.1.6,FASTPATH-ROUTING-MIB::agentSwitchIpRouterDiscoveryPreferenceLevel,Integer32,read-write,,current,,Preferability of the address as a default router address, related to other addresses on the same subnet. This is defined as the larger the number, the higher the preference.
.1.3.6.1.4.1.4526.10.2.2.4.1.7,FASTPATH-ROUTING-MIB::agentSwitchIpRouterDiscoveryAdvertisementAddress,IpAddress,read-write,,current,,Address used when sending router advertisements from the interface.
.1.3.6.1.4.1.4526.10.2.2.5,FASTPATH-ROUTING-MIB::agentSwitchIpVlanTable,,not-accessible,,current,,
.1.3.6.1.4.1.4526.10.2.2.5.1,FASTPATH-ROUTING-MIB::agentSwitchIpVlanEntry,,not-accessible,agentSwitchIpVlanId,current,,A Static VLAN for which routing can be enabled/disabled
.1.3.6.1.4.1.4526.10.2.2.5.1.1,FASTPATH-ROUTING-MIB::agentSwitchIpVlanId,Integer32,read-only,,current,,The Vlan's Id.
.1.3.6.1.4.1.4526.10.2.2.5.1.2,FASTPATH-ROUTING-MIB::agentSwitchIpVlanIfIndex,Integer32,read-only,,current,,The IfIndex associated with this VLAN.
.1.3.6.1.4.1.4526.10.2.2.5.1.3,FASTPATH-ROUTING-MIB::agentSwitchIpVlanRoutingStatus,INTEGER,read-create,,current,active(1):notInService(2):notReady(3):createAndGo(4):createAndWait(5):destroy(6),Status of Routing mode per Vlan. active(1) - Vlan is enabled for routing createAndGo(4) - Adds Vlan entry for routing destroy(6) - Removes Vlan from routing
.1.3.6.1.4.1.4526.10.2.2.6,FASTPATH-ROUTING-MIB::agentSwitchSecondaryAddressTable,,not-accessible,,current,,Contains a list of secondary IP Addresses associated with an interface.
.1.3.6.1.4.1.4526.10.2.2.6.1,FASTPATH-ROUTING-MIB::agentSwitchSecondaryAddressEntry,,not-accessible,agentSwitchIpInterfaceIfIndex:agentSwitchSecondaryIpAddress,current,,A secondary IP Address for a given interface. This IP Address must not  conflict with the IP Address configured in the agentSwitchIpInterfaceTable.
.1.3.6.1.4.1.4526.10.2.2.6.1.1,FASTPATH-ROUTING-MIB::agentSwitchSecondaryIpAddress,IpAddress,not-accessible,,current,,The Secondary IP Address assigned to this interface.
.1.3.6.1.4.1.4526.10.2.2.6.1.2,FASTPATH-ROUTING-MIB::agentSwitchSecondaryNetMask,IpAddress,read-create,,current,,The Secondary Net Mask assigned to this interface. This value must be set during creation, and can not be changed.
.1.3.6.1.4.1.4526.10.2.2.6.1.3,FASTPATH-ROUTING-MIB::agentSwitchSecondaryStatus,INTEGER,read-create,,current,active(1):notInService(2):notReady(3):createAndGo(4):createAndWait(5):destroy(6),Creates a new entry in the Secondary Address table. Allowed values are:  createAndGo(4) - Creates an entry in this table, associating the address with a given interface. The agentSwitchSecondaryNetMask object must be set during creation.  destroy(6) - Removes the associated address from the interface.
.1.3.6.1.4.1.4526.10.2.2.7,FASTPATH-ROUTING-MIB::agentSwitchHelperAddressTable,,not-accessible,,obsolete,,Replaced by agentSwitchIntfIpHelperAddressTable.
.1.3.6.1.4.1.4526.10.2.2.7.1,FASTPATH-ROUTING-MIB::agentSwitchHelperAddressEntry,,not-accessible,agentSwitchIpInterfaceIfIndex:agentSwitchHelperIpAddress,obsolete,,A Helper IP Address for a given interface.
.1.3.6.1.4.1.4526.10.2.2.7.1.1,FASTPATH-ROUTING-MIB::agentSwitchHelperIpAddress,IpAddress,not-accessible,,obsolete,,The Helper IP Address assigned to this interface.
.1.3.6.1.4.1.4526.10.2.2.7.1.2,FASTPATH-ROUTING-MIB::agentSwitchHelperStatus,INTEGER,read-create,,obsolete,active(1):notInService(2):notReady(3):createAndGo(4):createAndWait(5):destroy(6),Creates a new entry in the Helper Address table. Allowed values are: createAndGo(4) - Creates an entry in this table, associating the address with a given interface. The agentSwitchHelperNetMask object must be set during creation. destroy(6) - Removes the associated address from the interface.
.1.3.6.1.4.1.4526.10.2.2.8,FASTPATH-ROUTING-MIB::agentSwitchIpIcmpControlGroup,,,,,,
.1.3.6.1.4.1.4526.10.2.2.8.1,FASTPATH-ROUTING-MIB::agentSwitchIpIcmpEchoReplyMode,INTEGER,read-write,,current,enable(1):disable(2),Sets the administrative Echo Reply Mode.
.1.3.6.1.4.1.4526.10.2.2.8.2,FASTPATH-ROUTING-MIB::agentSwitchIpIcmpRedirectsMode,INTEGER,read-write,,current,enable(1):disable(2),Sets the administrative Mode for sending Redirects. 
.1.3.6.1.4.1.4526.10.2.2.8.3,FASTPATH-ROUTING-MIB::agentSwitchIpIcmpRateLimitInterval,Integer32,read-write,,current,,Specifies the time interval between tokens being placed in the bucket for ICMP Ratelimit.
.1.3.6.1.4.1.4526.10.2.2.8.4,FASTPATH-ROUTING-MIB::agentSwitchIpIcmpRateLimitBurstSize,Integer32,read-write,,current,,Specifies the number of tokens to be placed after timeout.
.1.3.6.1.4.1.4526.10.2.2.10,FASTPATH-ROUTING-MIB::agentSwitchIntfIpHelperAddressTable,,not-accessible,,current,,Contains a list of Helper IP Addresses associated with an interface.
.1.3.6.1.4.1.4526.10.2.2.10.1,FASTPATH-ROUTING-MIB::agentSwitchIntfIpHelperAddressEntry,,not-accessible,agentSwitchIpInterfaceIfIndex:agentSwitchIntfIpHelperUdpPort:agentSwitchIntfIpHelperIpAddress,current,,A Helper IP Address for a given interface.
.1.3.6.1.4.1.4526.10.2.2.10.1.1,FASTPATH-ROUTING-MIB::agentSwitchIntfIpHelperIpAddress,IpAddress,read-write,,current,,The Helper IP Address assigned to this interface.
.1.3.6.1.4.1.4526.10.2.2.10.1.2,FASTPATH-ROUTING-MIB::agentSwitchIntfIpHelperUdpPort,Unsigned32,read-write,,current,,UDP port number.
.1.3.6.1.4.1.4526.10.2.2.10.1.3,FASTPATH-ROUTING-MIB::agentSwitchIntfIpHelperDiscard,INTEGER,read-write,,current,true(1):false(2),If true, packets matching this entry are discarded.
.1.3.6.1.4.1.4526.10.2.2.10.1.4,FASTPATH-ROUTING-MIB::agentSwitchIntfIpHelperHitCount,Unsigned32,read-only,,current,,The number of times a packet has been forwarded or discarded according to this entry.
.1.3.6.1.4.1.4526.10.2.2.10.1.5,FASTPATH-ROUTING-MIB::agentSwitchIntfIpHelperStatus,INTEGER,read-create,,current,active(1):notInService(2):notReady(3):createAndGo(4):createAndWait(5):destroy(6),Creates a new entry in the Helper Address table. Allowed values are: createAndGo(4) - Creates an IP helper entry in this table. destroy(6) - Removes the IP helper entry.
.1.3.6.1.4.1.4526.10.2.3,FASTPATH-ROUTING-MIB::agentRouterRipConfigGroup,,,,,,
.1.3.6.1.4.1.4526.10.2.3.1,FASTPATH-ROUTING-MIB::agentRouterRipAdminState,INTEGER,read-write,,current,enable(1):disable(2),Sets the administrative mode of RIP in the router.
.1.3.6.1.4.1.4526.10.2.3.2,FASTPATH-ROUTING-MIB::agentRouterRipSplitHorizonMode,INTEGER,read-write,,current,none(1):simple(2):poisonReverse(3),Sets the RIP split horizon operating mode in the router. A value of none(1) means split horizon processing is disabled. When set to simple(2), the simple split  horizon technique is used. When set to poisonReverse(3), the split horizon with poison reverse technique is used. The default split horizon mode is simple(2).
.1.3.6.1.4.1.4526.10.2.3.3,FASTPATH-ROUTING-MIB::agentRouterRipAutoSummaryMode,INTEGER,read-write,,current,enable(1):disable(2),Sets the RIP auto summarization mode in the router. A value of enable(1) means that routes advertized by this RIP router are combined, or summarized, whenever possible into aggregates. When set to disable(2), routes are not aggregated in RIP updates generated by this router. The default auto summary mode is  enable(1).
.1.3.6.1.4.1.4526.10.2.3.4,FASTPATH-ROUTING-MIB::agentRouterRipHostRoutesAcceptMode,INTEGER,read-write,,current,enable(1):disable(2),Sets the RIP host route acceptance mode in the router. A value of enable(1) means that host routes advertized to this RIP router will be accepted (learned) into its routing table. When set to disable(2), host routes  advertized in RIP updates from neighboring routers are ignored. The default host routes accept mode is enable(1).
.1.3.6.1.4.1.4526.10.2.3.5,FASTPATH-ROUTING-MIB::agentRouterRipDefaultMetric,Integer32,read-write,,current,,Default metric of redistributed routes, when RIP redistributes  from other protocols.
.1.3.6.1.4.1.4526.10.2.3.6,FASTPATH-ROUTING-MIB::agentRouterRipDefaultMetricConfigured,INTEGER,read-write,,current,true(1):false(2),Flag to determine whether RIP default-metric is configured or not.
.1.3.6.1.4.1.4526.10.2.3.7,FASTPATH-ROUTING-MIB::agentRouterRipDefaultInfoOriginate,INTEGER,read-write,,current,true(1):false(2),Flag to determine, whether RIP can advertise a default-route learned from another protocol.
.1.3.6.1.4.1.4526.10.2.3.8,FASTPATH-ROUTING-MIB::agentRipRouteRedistTable,,not-accessible,,current,,This table contains the MIB objects required to configure  route-redistribution for RIP. Here, RIP is the Destination protocol and the source protocols can be any of : BGP, OSPF, Static, Connected.
.1.3.6.1.4.1.4526.10.2.3.8.1,FASTPATH-ROUTING-MIB::agentRipRouteRedistEntry,,not-accessible,agentRipRouteRedistSource,current,,
.1.3.6.1.4.1.4526.10.2.3.8.1.1,FASTPATH-ROUTING-MIB::agentRipRouteRedistSource,INTEGER,read-only,,current,connected(1):static(2):ospf(3):bgp(4),Source route, from which RIP can redistribute routes. This object also acts as the identifier for the  RIP redistribution Table entry.
.1.3.6.1.4.1.4526.10.2.3.8.1.2,FASTPATH-ROUTING-MIB::agentRipRouteRedistMode,INTEGER,read-write,,current,enable(1):disable(2),User enabels/disables route-redistribution for a particular source protocol.
.1.3.6.1.4.1.4526.10.2.3.8.1.3,FASTPATH-ROUTING-MIB::agentRipRouteRedistMetric,Integer32,read-write,,current,,Metric used for redistributing a particular source protocol route into RIP.
.1.3.6.1.4.1.4526.10.2.3.8.1.4,FASTPATH-ROUTING-MIB::agentRipRouteRedistMetricConfigured,INTEGER,read-write,,current,true(1):false(2),Flag to determine whether RIP redistribute-metric is configured or not.
.1.3.6.1.4.1.4526.10.2.3.8.1.5,FASTPATH-ROUTING-MIB::agentRipRouteRedistMatchInternal,INTEGER,read-write,,current,true(1):false(2):not-applicable(3),If this flag is true, RIP redistributes OSPF internal routes. It will be non-applicable, when source protocol is other than ospf.
.1.3.6.1.4.1.4526.10.2.3.8.1.6,FASTPATH-ROUTING-MIB::agentRipRouteRedistMatchExternal1,INTEGER,read-write,,current,true(1):false(2):not-applicable(3),If this flag is true, RIP redistributes OSPF External1 routes. It will be non-applicable, when source protocol is other than ospf.
.1.3.6.1.4.1.4526.10.2.3.8.1.7,FASTPATH-ROUTING-MIB::agentRipRouteRedistMatchExternal2,INTEGER,read-write,,current,true(1):false(2):not-applicable(3),If this flag is true, RIP redistributes OSPF External2 routes. It will be non-applicable, when source protocol is other than ospf.
.1.3.6.1.4.1.4526.10.2.3.8.1.8,FASTPATH-ROUTING-MIB::agentRipRouteRedistMatchNSSAExternal1,INTEGER,read-write,,current,true(1):false(2):not-applicable(3),If this flag is true, RIP redistributes OSPF NSSA-External1 routes. It will be non-applicable, when source protocol is other than ospf.
.1.3.6.1.4.1.4526.10.2.3.8.1.9,FASTPATH-ROUTING-MIB::agentRipRouteRedistMatchNSSAExternal2,INTEGER,read-write,,current,true(1):false(2):not-applicable(3),If this flag is true, RIP redistributes OSPF NSSA-External2 routes. It will be non-applicable, when source protocol is other than ospf.
.1.3.6.1.4.1.4526.10.2.3.8.1.10,FASTPATH-ROUTING-MIB::agentRipRouteRedistDistList,Unsigned32,read-write,,current,,Access-list number of the access-list, which filters routes received from a source-protocol.
.1.3.6.1.4.1.4526.10.2.3.8.1.11,FASTPATH-ROUTING-MIB::agentRipRouteRedistDistListConfigured,INTEGER,read-write,,current,true(1):false(2),Flag to determine whether Access-list is configured or not.
.1.3.6.1.4.1.4526.10.2.3.9,FASTPATH-ROUTING-MIB::agentRip2IfConfTable,,not-accessible,,current,,A list of subnets which require separate configuration in RIP. Augments rip2IfConfTable in the RIPv2-MIB.
.1.3.6.1.4.1.4526.10.2.3.9.1,FASTPATH-ROUTING-MIB::agentRip2IfConfEntry,,not-accessible,,current,,A Single Routing Domain in a single Subnet. Augments rip2IfConfEntry in RIPv2-MIB.
.1.3.6.1.4.1.4526.10.2.3.9.1.1,FASTPATH-ROUTING-MIB::agentRip2IfConfAuthKeyId,INTEGER,read-create,,current,,The identifier for the authentication key used on this interface. This field is only meaningful  when the RIPv2-MIB rip2IfConfAuthType is md5(3);  otherwise, the value is not used.
.1.3.6.1.4.1.4526.10.2.3.10,FASTPATH-ROUTING-MIB::agentRouterRipRoutePref,INTEGER,read-create,,current,,The route preference, sometimes called administrative distance, for RIP routes. A route with a preference of 255 is considered unreachable.
.1.3.6.1.4.1.4526.10.2.4,FASTPATH-ROUTING-MIB::agentRouterOspfConfigGroup,,,,,,
.1.3.6.1.4.1.4526.10.2.4.1,FASTPATH-ROUTING-MIB::agentOspfDefaultMetric,Integer32,read-write,,current,,Default metric of redistributed routes, when OSPF redistributes  from other protocols.
.1.3.6.1.4.1.4526.10.2.4.2,FASTPATH-ROUTING-MIB::agentOspfDefaultMetricConfigured,INTEGER,read-write,,current,true(1):false(2),Flag to determine whether OSPF default-metric is configured or not.
.1.3.6.1.4.1.4526.10.2.4.3,FASTPATH-ROUTING-MIB::agentOspfDefaultInfoOriginate,INTEGER,read-write,,current,true(1):false(2),Flag to determine, whether OSPF can advertise a default-route learned from another protocol.
.1.3.6.1.4.1.4526.10.2.4.4,FASTPATH-ROUTING-MIB::agentOspfDefaultInfoOriginateAlways,INTEGER,read-write,,current,true(1):false(2),When this flag is true, the router advertises 0.0.0.0/0.0.0.0 always. Without this option, OSPF will only advertise 0.0.0.0/0.0.0.0 if the router's forwarding table contains a default route.
.1.3.6.1.4.1.4526.10.2.4.5,FASTPATH-ROUTING-MIB::agentOspfDefaultInfoOriginateMetric,Integer32,read-write,,current,,Metric of the default route,which OSPF advertises when learned from other protocol.
.1.3.6.1.4.1.4526.10.2.4.6,FASTPATH-ROUTING-MIB::agentOspfDefaultInfoOriginateMetricConfigured,INTEGER,read-write,,current,true(1):false(2),Flag to determine whether OSPF default-info originate metric  is configured or not.
.1.3.6.1.4.1.4526.10.2.4.7,FASTPATH-ROUTING-MIB::agentOspfDefaultInfoOriginateMetricType,INTEGER,read-write,,current,externalType1(1):externalType2(2),Metric Type of the default route,which OSPF advertises when learned from other protocol. It can be 1(external type 1) or 2(external type 2).
.1.3.6.1.4.1.4526.10.2.4.8,FASTPATH-ROUTING-MIB::agentOspfRouteRedistTable,,not-accessible,,current,,This table contains the MIB objects required to configure  route-redistribution for OSPF. Here, OSPF is the Destination protocol and the source protocols can be any of : BGP, RIP, Static, Connected.
.1.3.6.1.4.1.4526.10.2.4.8.1,FASTPATH-ROUTING-MIB::agentOspfRouteRedistEntry,,not-accessible,agentOspfRouteRedistSource,current,,
.1.3.6.1.4.1.4526.10.2.4.8.1.1,FASTPATH-ROUTING-MIB::agentOspfRouteRedistSource,INTEGER,read-only,,current,connected(1):static(2):rip(3):bgp(4),Source protocol, from which OSPF can redistribute routes. This object also acts as the identifier for the  OSPF redistribution Table entry.
.1.3.6.1.4.1.4526.10.2.4.8.1.2,FASTPATH-ROUTING-MIB::agentOspfRouteRedistMode,INTEGER,read-write,,current,enable(1):disable(2),User enabels/disables route-redistribution for a particular source protocol.
.1.3.6.1.4.1.4526.10.2.4.8.1.3,FASTPATH-ROUTING-MIB::agentOspfRouteRedistMetric,Integer32,read-write,,current,,Metric used for redistributing a particular source protocol route into OSPF.
.1.3.6.1.4.1.4526.10.2.4.8.1.4,FASTPATH-ROUTING-MIB::agentOspfRouteRedistMetricConfigured,INTEGER,read-write,,current,true(1):false(2),Flag to determine whether OSPF redistribute-metric is configured or not.
.1.3.6.1.4.1.4526.10.2.4.8.1.5,FASTPATH-ROUTING-MIB::agentOspfRouteRedistMetricType,INTEGER,read-write,,current,externalType1(1):externalType2(2),Metric Type of routes,which OSPF redistributes from other source protocols. It can be 1(external type 1) or 2(external type 2).
.1.3.6.1.4.1.4526.10.2.4.8.1.6,FASTPATH-ROUTING-MIB::agentOspfRouteRedistTag,Unsigned32,read-write,,current,,It specifies the tag field in routes redistributed by OSPF.
.1.3.6.1.4.1.4526.10.2.4.8.1.7,FASTPATH-ROUTING-MIB::agentOspfRouteRedistSubnets,INTEGER,read-write,,current,true(1):false(2),If this value is false, then OSPF will not redistribute subnetted routes.
.1.3.6.1.4.1.4526.10.2.4.8.1.8,FASTPATH-ROUTING-MIB::agentOspfRouteRedistDistList,Unsigned32,read-write,,current,,Access-list number of the access-list, which filters routes received from a source-protocol.
.1.3.6.1.4.1.4526.10.2.4.8.1.9,FASTPATH-ROUTING-MIB::agentOspfRouteRedistDistListConfigured,INTEGER,read-write,,current,true(1):false(2),Flag to determine whether Access-list is configured or not.
.1.3.6.1.4.1.4526.10.2.4.9,FASTPATH-ROUTING-MIB::agentOspfIfTable,,not-accessible,,current,,The OSPF Interface Table describes the inter- faces from the viewpoint of OSPF. Augments  ospfIfTable from the OSPF-MIB.
.1.3.6.1.4.1.4526.10.2.4.9.1,FASTPATH-ROUTING-MIB::agentOspfIfEntry,,not-accessible,,current,,The OSPF Interface Entry describes one inter- face from the viewpoint of OSPF. Augments ospfIfEntry in OSPF-MIB.
.1.3.6.1.4.1.4526.10.2.4.9.1.1,FASTPATH-ROUTING-MIB::agentOspfIfAuthKeyId,INTEGER,read-create,,current,,The identifier for the authentication key used on this interface. This field is only meaningful  when the OSPF-MIB ospfIfAuthType is md5(2);  otherwise, the value is not used.
.1.3.6.1.4.1.4526.10.2.4.9.1.2,FASTPATH-ROUTING-MIB::agentOspfIfIpMtuIgnoreFlag,INTEGER,read-write,,current,enable(1):disable(2),Configures the IP MTU Ignore Flag value for this OSPF interface.
.1.3.6.1.4.1.4526.10.2.4.9.1.3,FASTPATH-ROUTING-MIB::agentOspfIfPassiveMode,INTEGER,read-write,,current,true(1):false(2),Flag to determine whether the interface is passive. A passive interface will not participate in the OSPF adjacency formation.
.1.3.6.1.4.1.4526.10.2.4.9.1.4,FASTPATH-ROUTING-MIB::agentOspfIfAdvertiseSecondaries,INTEGER,read-write,,current,enable(1):disable(2),Configures the advertisability of the secondary addresses configured on this interface.
.1.3.6.1.4.1.4526.10.2.4.10,FASTPATH-ROUTING-MIB::agentOspfVirtIfTable,,not-accessible,,current,,Information about this router's virtual inter- faces. Augments ospfVirtIfTable from the OSPF-MIB.
.1.3.6.1.4.1.4526.10.2.4.10.1,FASTPATH-ROUTING-MIB::agentOspfVirtIfEntry,,not-accessible,,current,,Information about a single Virtual Interface. Augments ospfVirtIfEntry in OSPF-MIB.
.1.3.6.1.4.1.4526.10.2.4.10.1.1,FASTPATH-ROUTING-MIB::agentOspfVirtIfAuthKeyId,INTEGER,read-create,,current,,The identifier for the authentication key used on this virtual interface. This field is only meaningful  when the OSPF-MIB ospfVirtIfAuthType is md5(2);  otherwise, the value is not used.
.1.3.6.1.4.1.4526.10.2.4.11,FASTPATH-ROUTING-MIB::agentRouterOspfRFC1583CompatibilityMode,INTEGER,read-write,,current,enable(1):disable(2),From RFC2328:  Controls the preference rules used in Section 16.4 when choosing among multiple AS-external-LSAs advertising the same destination. When set to 'enabled', the preference rules remain those specified by RFC 1583 ([Ref9]). When set to 'disabled', the preference rules are those stated in Section 16.4.1, which prevent routing loops when AS- external-LSAs for the same destination have been originated from different areas. Set to 'enabled' by default. In order to minimize the chance of routing loops, all OSPF routers in an OSPF routing domain should have RFC1583Compatibility set identically. When there are routers present that have not been updated with the functionality specified in Section 16.4.1 of this memo, all routers should have RFC1583Compatibility set to 'enabled'. Otherwise, all routers should have RFC1583Compatibility set to 'disabled', preventing all routing loops.
.1.3.6.1.4.1.4526.10.2.4.12,FASTPATH-ROUTING-MIB::agentOspfSpfDelayTime,Integer32,read-write,,current,,Delay time (in seconds) between when OSPF receives a topology change and when it starts an SPF calculation. It can be an integer from 0 to 65535. The default time is 5 seconds. A value of 0 means that there is no delay; that is, the SPF calculation is started immediately.
.1.3.6.1.4.1.4526.10.2.4.13,FASTPATH-ROUTING-MIB::agentOspfSpfHoldTime,Integer32,read-write,,current,,Minimum time (in seconds) between two consecutive SPF calculations. It can be an integer from 0 to 65535. The default time is 10 seconds. A value of 0 means that there is no delay; that is, two SPF calculations can be done, one immediately after the other.
.1.3.6.1.4.1.4526.10.2.4.14,FASTPATH-ROUTING-MIB::agentOspfAutoCostRefBw,Unsigned32,read-write,,current,,Auto cost refernece bandwidth of the  router interafaces for ospf metric calculations. It can be an integer from 1 to 4294967. The default reference bandwidth is 100 Mbps.
.1.3.6.1.4.1.4526.10.2.4.15,FASTPATH-ROUTING-MIB::agentOspfOpaqueLsaSupport,INTEGER,read-write,,current,true(1):false(2),The router's support for Opaque LSA types.  This object is persistent and when written  the entity SHOULD save the change to non-volatile storage.
.1.3.6.1.4.1.4526.10.2.4.16,FASTPATH-ROUTING-MIB::agentOspfAreaOpaqueLsdbTable,,not-accessible,,current,,The OSPF Process's Area Link State Database (LSDB).  The LSDB contains type-10 Link State Advertisements  from throughout the areas that the device is attached to.
.1.3.6.1.4.1.4526.10.2.4.16.1,FASTPATH-ROUTING-MIB::agentOspfAreaOpaqueLsdbEntry,,not-accessible,agentOspfAreaOpaqueLsdbAreaId:agentOspfAreaOpaqueLsdbType:agentOspfAreaOpaqueLsdbLsid:agentOspfAreaOpaqueLsdbRouterId,current,,A single AreaOpaque Link State Advertisement.
.1.3.6.1.4.1.4526.10.2.4.16.1.1,FASTPATH-ROUTING-MIB::agentOspfAreaOpaqueLsdbAreaId,IpAddress,read-only,,current,,The 32 bit identifier of the Area from which  the LSA was received.
.1.3.6.1.4.1.4526.10.2.4.16.1.2,FASTPATH-ROUTING-MIB::agentOspfAreaOpaqueLsdbType,INTEGER,read-only,,current,areaOpaqueLink(10),The type of the link state advertisement.  Each link state type has a separate advertisement  format.
.1.3.6.1.4.1.4526.10.2.4.16.1.3,FASTPATH-ROUTING-MIB::agentOspfAreaOpaqueLsdbLsid,IpAddress,read-only,,current,,The Link State ID is an LS Type Specific field  containing either a Router ID or an IP Address;  it identifies the piece of the routing domain  that is being described by the advertisement.
.1.3.6.1.4.1.4526.10.2.4.16.1.4,FASTPATH-ROUTING-MIB::agentOspfAreaOpaqueLsdbRouterId,IpAddress,read-only,,current,,The 32 bit number that uniquely identifies the  originating router in the Autonomous System.
.1.3.6.1.4.1.4526.10.2.4.16.1.5,FASTPATH-ROUTING-MIB::agentOspfAreaOpaqueLsdbSequence,Integer32,read-only,,current,,The sequence number field is a signed 32-bit  integer. It starts with the value '80000001'h,  or -'7FFFFFFF'h, and increments until '7FFFFFFF'h.  Thus, a typical sequence number will be very negative.  It is used to detect old and duplicate link state  advertisements. The space of sequence numbers is linearly  ordered. The larger the sequence number the more recent  the advertisement.
.1.3.6.1.4.1.4526.10.2.4.16.1.6,FASTPATH-ROUTING-MIB::agentOspfAreaOpaqueLsdbAge,Integer32,read-only,,current,,This field is the age of the link state advertisement  in seconds.
.1.3.6.1.4.1.4526.10.2.4.16.1.7,FASTPATH-ROUTING-MIB::agentOspfAreaOpaqueLsdbChecksum,Integer32,read-only,,current,,This field is the checksum of the complete contents of the advertisement, excepting the age field. The age field is excepted so that an advertisement's age can be  incremented without updating the checksum. The checksum used is the same that is used for ISO connectionless datagrams; it is commonly referred to as the Fletcher  checksum.
.1.3.6.1.4.1.4526.10.2.4.16.1.8,FASTPATH-ROUTING-MIB::agentOspfAreaOpaqueLsdbAdvertisement,OCTET,read-only,,current,,The entire Link State Advertisement, including  its header.  Note that for variable length LSAs, SNMP agents  may not be able to return the largest string size
.1.3.6.1.4.1.4526.10.2.4.17,FASTPATH-ROUTING-MIB::agentOspfLocalLsdbTable,,not-accessible,,current,,The OSPF Process's Link-Local Link State Database  for non-virtual links.  This table is identical to the OSPF LSDB Table  in format, but contains only Link-Local Link State  Advertisements for non-virtual links. The purpose is  to allow Link-Local LSAs to be displayed for each  non-virtual interface. This table is implemented to  support type-9 LSAs which are defined  in 'The OSPF Opaque LSA Option'.
.1.3.6.1.4.1.4526.10.2.4.17.1,FASTPATH-ROUTING-MIB::agentOspfLocalLsdbEntry,,not-accessible,agentOspfLocalLsdbIpAddress:agentOspfLocalLsdbAddressLessIf:agentOspfLocalLsdbType:agentOspfLocalLsdbLsid:agentOspfLocalLsdbRouterId,current,,A single Link State Advertisement.
.1.3.6.1.4.1.4526.10.2.4.17.1.1,FASTPATH-ROUTING-MIB::agentOspfLocalLsdbIpAddress,IpAddress,read-only,,current,,The IP Address of the interface from  which the LSA was received if the interface is  numbered.
.1.3.6.1.4.1.4526.10.2.4.17.1.2,FASTPATH-ROUTING-MIB::agentOspfLocalLsdbAddressLessIf,Integer32,read-only,,current,,The Interface Index of the interface from  which the LSA was received if the interface is  unnumbered.
.1.3.6.1.4.1.4526.10.2.4.17.1.3,FASTPATH-ROUTING-MIB::agentOspfLocalLsdbType,INTEGER,read-only,,current,localOpaqueLink(9),The type of the link state advertisement.  Each link state type has a separate advertise-  ment format.
.1.3.6.1.4.1.4526.10.2.4.17.1.4,FASTPATH-ROUTING-MIB::agentOspfLocalLsdbLsid,IpAddress,read-only,,current,,The Link State ID is an LS Type Specific field  containing a 32 bit identifier in IP address format;  it identifies the piece of the routing domain  that is being described by the advertisement.
.1.3.6.1.4.1.4526.10.2.4.17.1.5,FASTPATH-ROUTING-MIB::agentOspfLocalLsdbRouterId,IpAddress,read-only,,current,,The 32 bit number that uniquely identifies the  originating router in the Autonomous System.
.1.3.6.1.4.1.4526.10.2.4.17.1.6,FASTPATH-ROUTING-MIB::agentOspfLocalLsdbSequence,Integer32,read-only,,current,,The sequence number field is a signed 32-bit  integer. It starts with the value '80000001'h,  or -'7FFFFFFF'h, and increments until '7FFFFFFF'h.  Thus, a typical sequence number will be very negative.  It is used to detect old and duplicate link state  advertisements. The space of sequence numbers is linearly  ordered. The larger the sequence number the more recent  the advertisement.
.1.3.6.1.4.1.4526.10.2.4.17.1.7,FASTPATH-ROUTING-MIB::agentOspfLocalLsdbAge,Integer32,read-only,,current,,This field is the age of the link state adver-  tisement in seconds.
.1.3.6.1.4.1.4526.10.2.4.17.1.8,FASTPATH-ROUTING-MIB::agentOspfLocalLsdbChecksum,Integer32,read-only,,current,,This field is the checksum of the complete  contents of the advertisement, excepting the  age field. The age field is excepted so that  an advertisement's age can be incremented  without updating the checksum. The checksum  used is the same that is used for ISO connec-  tionless datagrams; it is commonly referred to  as the Fletcher checksum.
.1.3.6.1.4.1.4526.10.2.4.17.1.9,FASTPATH-ROUTING-MIB::agentOspfLocalLsdbAdvertisement,OCTET,read-only,,current,,The entire Link State Advertisement, including  its header.  Note that for variable length LSAs, SNMP agents  may not be able to return the largest string size.
.1.3.6.1.4.1.4526.10.2.4.18,FASTPATH-ROUTING-MIB::agentOspfAsLsdbTable,,not-accessible,,current,,The OSPF Process's AS-scope LSA Link State Database.  The Database contains the AS-scope Link State  Advertisements from throughout the areas that  the device is attached to.  This table is identical to the OSPF LSDB Table  in format, but contains only AS-scope Link State  Advertisements. The purpose is to allow AS-scope  LSAs to be displayed once for the router rather  than once in each non-stub area.
.1.3.6.1.4.1.4526.10.2.4.18.1,FASTPATH-ROUTING-MIB::agentOspfAsLsdbEntry,,not-accessible,agentOspfAsLsdbType:agentOspfAsLsdbLsid:agentOspfAsLsdbRouterId,current,,A single Link State Advertisement.
.1.3.6.1.4.1.4526.10.2.4.18.1.1,FASTPATH-ROUTING-MIB::agentOspfAsLsdbType,INTEGER,read-only,,current,asOpaqueLink(11),The type of the link state advertisement.  Each link state type has a separate advertise-  ment format.
.1.3.6.1.4.1.4526.10.2.4.18.1.2,FASTPATH-ROUTING-MIB::agentOspfAsLsdbLsid,IpAddress,read-only,,current,,The Link State ID is an LS Type Specific field  containing either a Router ID or an IP Address;  it identifies the piece of the routing domain  that is being described by the advertisement.
.1.3.6.1.4.1.4526.10.2.4.18.1.3,FASTPATH-ROUTING-MIB::agentOspfAsLsdbRouterId,IpAddress,read-only,,current,,The 32 bit number that uniquely identifies the  originating router in the Autonomous System.
.1.3.6.1.4.1.4526.10.2.4.18.1.4,FASTPATH-ROUTING-MIB::agentOspfAsLsdbSequence,Integer32,read-only,,current,,The sequence number field is a signed 32-bit  integer. It starts with the value '80000001'h,  or -'7FFFFFFF'h, and increments until '7FFFFFFF'h.  Thus, a typical sequence number will be very negative.  It is used to detect old and duplicate link state  advertisements. The space of sequence numbers is linearly  ordered. The larger the sequence number the more recent  the advertisement.
.1.3.6.1.4.1.4526.10.2.4.18.1.5,FASTPATH-ROUTING-MIB::agentOspfAsLsdbAge,Integer32,read-only,,current,,This field is the age of the link state adver-  tisement in seconds.
.1.3.6.1.4.1.4526.10.2.4.18.1.6,FASTPATH-ROUTING-MIB::agentOspfAsLsdbChecksum,Integer32,read-only,,current,,This field is the checksum of the complete  contents of the advertisement, excepting the  age field. The age field is excepted so that  an advertisement's age can be incremented  without updating the checksum. The checksum  used is the same that is used for ISO connec-  tionless datagrams; it is commonly referred to  as the Fletcher checksum.
.1.3.6.1.4.1.4526.10.2.4.18.1.7,FASTPATH-ROUTING-MIB::agentOspfAsLsdbAdvertisement,OCTET,read-only,,current,,The entire Link State Advertisement, including  its header.
.1.3.6.1.4.1.4526.10.2.4.19,FASTPATH-ROUTING-MIB::agentOspfDefaultPassiveMode,INTEGER,read-write,,current,true(1):false(2),Flag to determine, whether all the interfaces are passive interfaces by default. A passive interface will not participate in the OSPF adjacency formation.
.1.3.6.1.4.1.4526.10.2.4.20,FASTPATH-ROUTING-MIB::agentOspfRoutePrefIntraArea,INTEGER,read-write,,current,,The route preference, sometimes called administrative distance, for intra-area OSPFv2 routes. A route with a preference of 255 is considered unreachable.
.1.3.6.1.4.1.4526.10.2.4.21,FASTPATH-ROUTING-MIB::agentOspfRoutePrefInterArea,INTEGER,read-write,,current,,The route preference, sometimes called administrative distance, for inter-area OSPFv2 routes. A route with a preference of 255 is considered unreachable.
.1.3.6.1.4.1.4526.10.2.4.22,FASTPATH-ROUTING-MIB::agentOspfRoutePrefExternal,INTEGER,read-write,,current,,The route preference, sometimes called administrative distance, for external OSPFv2 routes. A route with a preference of 255 is considered unreachable.
.1.3.6.1.4.1.4526.10.2.5,FASTPATH-ROUTING-MIB::agentSnmpTrapFlagsConfigGroupLayer3,,,,,,
.1.3.6.1.4.1.4526.10.2.5.1,FASTPATH-ROUTING-MIB::agentSnmpVRRPNewMasterTrapFlag,INTEGER,read-write,,current,enable(1):disable(2),This flag enables the sending of VRRP new master notification traps.
.1.3.6.1.4.1.4526.10.2.5.2,FASTPATH-ROUTING-MIB::agentSnmpVRRPAuthFailureTrapFlag,INTEGER,read-write,,current,enable(1):disable(2),This flag enables the sending of VRRP authentication failure notification traps.
.1.3.6.1.4.1.4526.10.2.6,FASTPATH-ROUTING-MIB::agentBootpDhcpRelayGroup,,,,,,
.1.3.6.1.4.1.4526.10.2.6.1,FASTPATH-ROUTING-MIB::agentBootpDhcpRelayMaxHopCount,Integer32,read-write,,current,,The BOOTP/DHCP Max Hop Count. The relay agent silently discards BOOTREQUEST messages whose hops field exceeds the value 16  assuming that the request is looped through the intermediate agents. The default value is 4.
.1.3.6.1.4.1.4526.10.2.6.2,FASTPATH-ROUTING-MIB::agentBootpDhcpRelayForwardingIp,IpAddress,read-write,,obsolete,,DHCP server addresses are now configured through IP helper.
.1.3.6.1.4.1.4526.10.2.6.3,FASTPATH-ROUTING-MIB::agentBootpDhcpRelayForwardMode,INTEGER,read-write,,obsolete,enable(1):disable(2),The DHCP relay admin mode is replaced by the IP helper admin mode.
.1.3.6.1.4.1.4526.10.2.6.4,FASTPATH-ROUTING-MIB::agentBootpDhcpRelayMinWaitTime,Integer32,read-write,,current,,The BOOTP/DHCP Minimum Wait Time.  When the BOOTP relay agent receives a BOOTREQUEST message, it MAY use the value of the 'secs'  (seconds since client began booting) field of the request as a factor in deciding whether to  relay the request or not.
.1.3.6.1.4.1.4526.10.2.6.5,FASTPATH-ROUTING-MIB::agentBootpDhcpRelayCircuitIdOptionMode,INTEGER,read-write,,current,enable(1):disable(2),The BOOTP/DHCP Circuit ID Option Mode.  This flag is set to enable/disable the network element to add/remove the DHCP Relay agent Circuit ID sub-options.
.1.3.6.1.4.1.4526.10.2.6.6,FASTPATH-ROUTING-MIB::agentBootpDhcpRelayNumOfRequestsReceived,Integer32,read-only,,obsolete,,Replaced by IP helper statistics.
.1.3.6.1.4.1.4526.10.2.6.7,FASTPATH-ROUTING-MIB::agentBootpDhcpRelayNumOfRequestsForwarded,Integer32,read-only,,obsolete,,Replaced by IP helper statistics.
.1.3.6.1.4.1.4526.10.2.6.8,FASTPATH-ROUTING-MIB::agentBootpDhcpRelayNumOfDiscards,Integer32,read-only,,obsolete,,Replaced by IP helper statistics.
.1.3.6.1.4.1.4526.10.2.7,FASTPATH-ROUTING-MIB::agentECMPGroup,,,,,,
.1.3.6.1.4.1.4526.10.2.7.1,FASTPATH-ROUTING-MIB::agentECMPOspfMaxPaths,Integer32,read-write,,current,,It sets the number of paths that OSPF can report for a given destination  where maxpaths is platform-dependent.
.1.3.6.1.4.1.4526.10.2.8,FASTPATH-ROUTING-MIB::agentRouterVrrpConfigGroup,,,,,,
.1.3.6.1.4.1.4526.10.2.8.1,FASTPATH-ROUTING-MIB::agentRouterVrrpAdminState,INTEGER,read-write,,current,enable(1):disable(2),Sets the administrative mode of VRRP in the router.
.1.3.6.1.4.1.4526.10.2.8.2,FASTPATH-ROUTING-MIB::agentRouterVrrpConfiguredTable,,not-accessible,,current,,Operations table for a VRRP router which consists of a sequence (i.e., one or more conceptual rows) of `agentRouterVrrpConfiguredEntry' items.
.1.3.6.1.4.1.4526.10.2.8.2.1,FASTPATH-ROUTING-MIB::agentRouterVrrpConfiguredEntry,,not-accessible,ifIndex:vrrpOperVrId,current,,An entry in the table contains operational priority that is associated with a virtual router.
.1.3.6.1.4.1.4526.10.2.8.2.1.1,FASTPATH-ROUTING-MIB::agentRouterVrrpConfiguredPriority,Integer32,read-only,,current,,This object specifies the value set by the vrrpOperPriority object. The GET operation on 'vrrpOperPriority' will be affected by both the tracking process and the configured priority set by the vrrpOperPriority object.
.1.3.6.1.4.1.4526.10.2.9,FASTPATH-ROUTING-MIB::agentVrrpOperations,,,,,,
.1.3.6.1.4.1.4526.10.2.9.1,FASTPATH-ROUTING-MIB::agentRouterVrrpOperTable,,not-accessible,,obsolete,,Operations table for a VRRP router which consists of a sequence (i.e., one or more conceptual rows) of `agentRouterVrrpOperEntry' items.
.1.3.6.1.4.1.4526.10.2.9.1.1,FASTPATH-ROUTING-MIB::agentRouterVrrpOperEntry,,not-accessible,ifIndex:vrrpOperVrId,obsolete,,An entry in the table contains operational priority that is  associated with a virtual router.
.1.3.6.1.4.1.4526.10.2.9.1.1.1,FASTPATH-ROUTING-MIB::agentRouterVrrpOperPriority,Integer32,read-only,,obsolete,,This object specifies the operational priority of the VRRP router. This value will be afftected by both the tracking process and the configured priority set by the vrrpOperPriority object.
.1.3.6.1.4.1.4526.10.2.10,FASTPATH-ROUTING-MIB::agentRouterVrrpTrackGroup,,,,,,
.1.3.6.1.4.1.4526.10.2.10.1,FASTPATH-ROUTING-MIB::agentRouterVrrpTrackIntfTable,,not-accessible,,current,,Tracking table for a VRRP router which consists of agentRouterVrrpTrackIntfEntry items.
.1.3.6.1.4.1.4526.10.2.10.1.1,FASTPATH-ROUTING-MIB::agentRouterVrrpTrackIntfEntry,,not-accessible,ifIndex:vrrpOperVrId:agentRouterVrrpTrackIntf,current,,An entry in the table contains tracked IP interfaces  associated with a virtual router.
.1.3.6.1.4.1.4526.10.2.10.1.1.1,FASTPATH-ROUTING-MIB::agentRouterVrrpTrackIntf,Integer32,read-create,,current,,This object specifies the interface to be tracked.
.1.3.6.1.4.1.4526.10.2.10.1.1.2,FASTPATH-ROUTING-MIB::agentRouterVrrpTrackIfPrioDec,Integer32,read-create,,current,,This object specifies the decrement priority of the  VRRP router.
.1.3.6.1.4.1.4526.10.2.10.1.1.3,FASTPATH-ROUTING-MIB::agentRouterVrrpTrackIfState,INTEGER,read-only,,current,true(1):false(2),This object specifies the IP state of the tracked interface  for the virtual router. 
.1.3.6.1.4.1.4526.10.2.10.1.1.4,FASTPATH-ROUTING-MIB::agentRouterVrrpTrackIfStatus,INTEGER,read-create,,current,active(1):notInService(2):notReady(3):createAndGo(4):createAndWait(5):destroy(6),The row status variable, used in accordance to installation and removal conventions for conceptual rows. To create a row in this table, a manager sets this object to either createAndGo(4) or createAndWait(5). The newly created row will be in active state later. To destroy the row set this object to destroy.
.1.3.6.1.4.1.4526.10.2.10.2,FASTPATH-ROUTING-MIB::agentRouterVrrpTrackRouteTable,,not-accessible,,current,,Tracking table for a VRRP router which consists of a 'agentRouterVrrpTrackRouteEntry' items.
.1.3.6.1.4.1.4526.10.2.10.2.1,FASTPATH-ROUTING-MIB::agentRouterVrrpTrackRouteEntry,,not-accessible,ifIndex:vrrpOperVrId:agentRouterVrrpTrackRtPfx:agentRouterVrrpTrackRtPfxLen,current,,An entry in the table contains tracked Routes associated with a virtual router.
.1.3.6.1.4.1.4526.10.2.10.2.1.1,FASTPATH-ROUTING-MIB::agentRouterVrrpTrackRtPfx,IpAddress,read-create,,current,,This object specifies the prefix of the route to be tracked.
.1.3.6.1.4.1.4526.10.2.10.2.1.2,FASTPATH-ROUTING-MIB::agentRouterVrrpTrackRtPfxLen,Integer32,read-create,,current,,This object specifies prefix length of the route to be tracked.
.1.3.6.1.4.1.4526.10.2.10.2.1.3,FASTPATH-ROUTING-MIB::agentRouterVrrpTrackRtPrioDec,Integer32,read-create,,current,,This object specifies the decrement priority of the  VRRP router.
.1.3.6.1.4.1.4526.10.2.10.2.1.4,FASTPATH-ROUTING-MIB::agentRouterVrrpTrackRtReachable,INTEGER,read-only,,current,true(1):false(2),This object specifies the reachability of the tracked route.
.1.3.6.1.4.1.4526.10.2.10.2.1.5,FASTPATH-ROUTING-MIB::agentRouterVrrpTrackRtStatus,INTEGER,read-create,,current,active(1):notInService(2):notReady(3):createAndGo(4):createAndWait(5):destroy(6),The row status variable, used in accordance to installation and removal conventions for conceptual rows. To create a row in this table, a manager sets this object to either createAndGo(4) or createAndWait(5). The newly created row will be in active state later. To delete the tracked route set this object to destroy.
.1.3.6.1.4.1.4526.10.2.11,FASTPATH-ROUTING-MIB::agentIpHelperGroup,,,,,,
.1.3.6.1.4.1.4526.10.2.11.1,FASTPATH-ROUTING-MIB::agentIpHelperAdminMode,INTEGER,read-write,,current,enable(1):disable(2),Administratively enable or disable IP helper.
.1.3.6.1.4.1.4526.10.2.11.2,FASTPATH-ROUTING-MIB::agentDhcpClientMsgsReceived,Integer32,read-only,,current,,The Number of DHCP Requests Received.  Total number of DHCP requests received from all clients.
.1.3.6.1.4.1.4526.10.2.11.3,FASTPATH-ROUTING-MIB::agentDhcpClientMsgsRelayed,Integer32,read-only,,current,,The Number of DHCP Requests Forwarded.  Total number of DHCP requests relayed to a server.
.1.3.6.1.4.1.4526.10.2.11.4,FASTPATH-ROUTING-MIB::agentDhcpServerMsgsReceived,Integer32,read-only,,current,,The number of DHCP messages received from a server.
.1.3.6.1.4.1.4526.10.2.11.5,FASTPATH-ROUTING-MIB::agentDhcpServerMsgsRelayed,Integer32,read-only,,current,,The number of DHCP messages relayed to a server.
.1.3.6.1.4.1.4526.10.2.11.6,FASTPATH-ROUTING-MIB::agentUdpClientMsgsReceived,Integer32,read-only,,current,,The number of UDP messages received from all clients.
.1.3.6.1.4.1.4526.10.2.11.7,FASTPATH-ROUTING-MIB::agentUdpClientMsgsRelayed,Integer32,read-only,,current,,The number of UDP messages relayed to a server.
.1.3.6.1.4.1.4526.10.2.11.8,FASTPATH-ROUTING-MIB::agentSwitchIpHelperAddressTable,,not-accessible,,current,,Contains a list of IP helper addresses configured globally.
.1.3.6.1.4.1.4526.10.2.11.8.1,FASTPATH-ROUTING-MIB::agentSwitchIpHelperAddressEntry,,not-accessible,agentSwitchIpHelperAddress:agentSwitchIpHelperUdpPort,current,,An IP Helper address that applies to packets received on any interface.
.1.3.6.1.4.1.4526.10.2.11.8.1.1,FASTPATH-ROUTING-MIB::agentSwitchIpHelperAddress,IpAddress,read-write,,current,,The IP Helper address assigned to this interface.
.1.3.6.1.4.1.4526.10.2.11.8.1.2,FASTPATH-ROUTING-MIB::agentSwitchIpHelperUdpPort,Unsigned32,read-write,,current,,UDP port number.
.1.3.6.1.4.1.4526.10.2.11.8.1.3,FASTPATH-ROUTING-MIB::agentSwitchIpHelperHitCount,Unsigned32,read-only,,current,,The number of times a packet has been forwarded or discarded according to this entry.
.1.3.6.1.4.1.4526.10.2.11.8.1.4,FASTPATH-ROUTING-MIB::agentSwitchIpHelperStatus,INTEGER,read-create,,current,active(1):notInService(2):notReady(3):createAndGo(4):createAndWait(5):destroy(6),Creates a new entry in the global IP Helper address table. Allowed values are: createAndGo(4) - Creates an IP helper entry in this table. destroy(6) - Removes the IP helper entry.
.1.3.6.1.4.1.4526.10.2.12,FASTPATH-ROUTING-MIB::agentInternalVlanGroup,,,,,,
.1.3.6.1.4.1.4526.10.2.12.1,FASTPATH-ROUTING-MIB::agentInternalVlanBase,Integer32,read-write,,current,,The VLAN ID internally assigned to the first port-based routing interface.
.1.3.6.1.4.1.4526.10.2.12.2,FASTPATH-ROUTING-MIB::agentInternalVlanPolicy,INTEGER,read-write,,current,ascending(0):descending(1),Whether to search up or down from the base VLAN ID for a free VLAN ID to assign to a port-based routing interface.
.1.3.6.1.4.1.4526.10.2.12.3,FASTPATH-ROUTING-MIB::agentSwitchInternalVlanTable,,not-accessible,,current,,Contains a list of VLAN IDs used internally for port-based routing interfaces.
.1.3.6.1.4.1.4526.10.2.12.3.1,FASTPATH-ROUTING-MIB::agentSwitchInternalVlanEntry,,not-accessible,agentSwitchInternalVlanId,current,,A VLAN ID internally assigned to a port-based routing interface.
.1.3.6.1.4.1.4526.10.2.12.3.1.1,FASTPATH-ROUTING-MIB::agentSwitchInternalVlanId,Integer32,not-accessible,,current,,A VLAN ID internally assigned to a port-based routing interface.
.1.3.6.1.4.1.4526.10.2.12.3.1.2,FASTPATH-ROUTING-MIB::agentSwitchInternalVlanIfIndex,Integer32,read-only,,current,,Interface index of port-based routing interface using this VLAN ID.
.1.3.6.1.4.1.4526.10.3,FASTPATH-QOS-MIB::fastPathQOS,,,,,,The MIB definitaions for Quality of Service Flex package.
.1.3.6.1.4.1.4526.10.3.2,FASTPATH-QOS-ACL-MIB::fastPathQOSACL,,,,,,The MIB definitions for Quality of Service - ACL Flex package.
.1.3.6.1.4.1.4526.10.3.2.0,FASTPATH-QOS-ACL-MIB::aclNotifications,,,,,,
.1.3.6.1.4.1.4526.10.3.2.0.1,FASTPATH-QOS-ACL-MIB::aclTrapRuleLogEvent,,,,,,This trap is generated on a periodic basis to indicate that an  ACL rule configured for logging was actively used by hardware to  take action on one or more packets. The aclTrapRuleHitCount denotes  the number of times this rule was hit during the most recent logging interval. ACL Trap generation requires that the aclTrapFlag object be set to enable(1).
.1.3.6.1.4.1.4526.10.3.2.1,FASTPATH-QOS-ACL-MIB::aclTable,,not-accessible,,current,,A table of ACL instances.
.1.3.6.1.4.1.4526.10.3.2.1.1,FASTPATH-QOS-ACL-MIB::aclEntry,,not-accessible,aclIndex,current,,
.1.3.6.1.4.1.4526.10.3.2.1.1.1,FASTPATH-QOS-ACL-MIB::aclIndex,Integer32,not-accessible,,current,,The IP ACL table index this instance is associated with.
.1.3.6.1.4.1.4526.10.3.2.1.1.2,FASTPATH-QOS-ACL-MIB::aclName,OCTET,read-create,,current,,The name of this IPv4 ACL entry, which must consist of 1 to 31 alphanumeric characters and uniquely identify this IPv4 ACL. An existing IPv4 ACL can be renamed by setting this object to a new name. This object must be set to complete a new IPv4 ACL  row instance.
.1.3.6.1.4.1.4526.10.3.2.1.1.3,FASTPATH-QOS-ACL-MIB::aclStatus,INTEGER,read-create,,current,active(1):notInService(2):notReady(3):createAndGo(4):createAndWait(5):destroy(6),Status of this instance. Entries can not be deleted until all rows in  the aclIfTable and aclRuleTable with corresponding values of aclIndex  have been deleted.  active(1) - this ACL instance is active createAndGo(4) - set to this value to create an instance destroy(6) - set to this value to delete an instance
.1.3.6.1.4.1.4526.10.3.2.2,FASTPATH-QOS-ACL-MIB::aclIfTable,,not-accessible,,current,,A table of ACL interface instances per direction.
.1.3.6.1.4.1.4526.10.3.2.2.1,FASTPATH-QOS-ACL-MIB::aclIfEntry,,not-accessible,aclIfIndex:aclIfDirection:aclIfSequence:aclIfAclType:aclIfAclId,current,,
.1.3.6.1.4.1.4526.10.3.2.2.1.1,FASTPATH-QOS-ACL-MIB::aclIfIndex,Integer32,not-accessible,,current,,The interface to which this ACL instance applies.
.1.3.6.1.4.1.4526.10.3.2.2.1.2,FASTPATH-QOS-ACL-MIB::aclIfDirection,INTEGER,not-accessible,,current,inbound(1):outbound(2),The interface direction to which this ACL instance applies.
.1.3.6.1.4.1.4526.10.3.2.2.1.3,FASTPATH-QOS-ACL-MIB::aclIfSequence,Unsigned32,not-accessible,,current,,The relative evaluation sequence of this ACL for this interface and direction. When multiple ACLs are allowed  for a given interface and direction, the sequence number  determines the order in which the list of ACLs are evaluated, with lower sequence numbers given higher precedence. The sequence number value is arbitrary, but must be a unique non-zero value for a given interface and direction.  Setting this object to an existing sequence number  value for a given interface and direction causes the  ACL corresponding to that value to be replaced with this ACL.
.1.3.6.1.4.1.4526.10.3.2.2.1.4,FASTPATH-QOS-ACL-MIB::aclIfAclType,INTEGER,not-accessible,,current,ip(1):mac(2):ipv6(3),The type of this ACL, which is used to interpret the  aclIfId object value. Each type of ACL uses its own numbering scheme for identification (see aclIfAclId object for details). The aclIfAclId object must be specified along with this  object.
.1.3.6.1.4.1.4526.10.3.2.2.1.5,FASTPATH-QOS-ACL-MIB::aclIfAclId,Integer32,not-accessible,,current,,The ACL identifier value, which is interpreted based on the aclIfType object. For the IP ACLs, the actual ACL number is its identifier as follows: IP standard ranges from 1-99, while  IP extended ranges from 100-199. Here, aclIfAclId represents  aclIndex.  The MAC ACLs use an internally-generated index value that is assigned when the ACL is created.Here, aclIfAclId  represents aclMacIndex. The IPv6 ACLs use an internally-generated index value that is assigned when the ACL is created.Here, aclVlanAclId  represents aclIpv6Index.  The aclIfType object must be specified along with this object.
.1.3.6.1.4.1.4526.10.3.2.2.1.6,FASTPATH-QOS-ACL-MIB::aclIfStatus,INTEGER,read-create,,current,active(1):notInService(2):notReady(3):createAndGo(4):createAndWait(5):destroy(6),Status of this instance.  active(1) - this ACL interface instance is active createAndGo(4) - set to this value to assign an ACL to an interface and direction destroy(6) - set to this value to remove an ACL from an interface and direction
.1.3.6.1.4.1.4526.10.3.2.4,FASTPATH-QOS-ACL-MIB::aclRuleTable,,not-accessible,,current,,A table of IP ACL Rule instances.
.1.3.6.1.4.1.4526.10.3.2.4.1,FASTPATH-QOS-ACL-MIB::aclRuleEntry,,not-accessible,aclIndex:aclRuleIndex,current,,A table of IP ACL Classification Rules
.1.3.6.1.4.1.4526.10.3.2.4.1.1,FASTPATH-QOS-ACL-MIB::aclRuleIndex,Integer32,not-accessible,,current,,The index of this rule instance within an IP ACL.
.1.3.6.1.4.1.4526.10.3.2.4.1.2,FASTPATH-QOS-ACL-MIB::aclRuleAction,INTEGER,read-create,,current,permit(1):deny(2),The type of action this rule should perform.
.1.3.6.1.4.1.4526.10.3.2.4.1.3,FASTPATH-QOS-ACL-MIB::aclRuleProtocol,Integer32,read-create,,current,,icmp - 1 igmp - 2 ip - 4 tcp - 6 udp - 17 All values from 1 to 255 are valid.
.1.3.6.1.4.1.4526.10.3.2.4.1.4,FASTPATH-QOS-ACL-MIB::aclRuleSrcIpAddress,IpAddress,read-create,,current,,The Source IP Address used in the ACL Classification.
.1.3.6.1.4.1.4526.10.3.2.4.1.5,FASTPATH-QOS-ACL-MIB::aclRuleSrcIpMask,IpAddress,read-create,,current,,The Source IP Mask used in the ACL Classification. This mask is expressed using wild-card notation,which is the 1's compliment of traditional Subnet Masks. Here, the 'Don't care bits' are represented by binary 1's and  'Do care bits' are represented by binary 0's. 
.1.3.6.1.4.1.4526.10.3.2.4.1.6,FASTPATH-QOS-ACL-MIB::aclRuleSrcL4Port,Integer32,read-create,,current,,The Source Port Number (Layer 4) used in the ACL Classification.
.1.3.6.1.4.1.4526.10.3.2.4.1.7,FASTPATH-QOS-ACL-MIB::aclRuleSrcL4PortRangeStart,Integer32,read-create,,current,,The Source Port Number(Layer 4) range start.
.1.3.6.1.4.1.4526.10.3.2.4.1.8,FASTPATH-QOS-ACL-MIB::aclRuleSrcL4PortRangeEnd,Integer32,read-create,,current,,The Source Port Number(Layer 4) range end.
.1.3.6.1.4.1.4526.10.3.2.4.1.9,FASTPATH-QOS-ACL-MIB::aclRuleDestIpAddress,IpAddress,read-create,,current,,The Destination IP Address used in the ACL Classification.
.1.3.6.1.4.1.4526.10.3.2.4.1.10,FASTPATH-QOS-ACL-MIB::aclRuleDestIpMask,IpAddress,read-create,,current,,The Destination IP Mask used in the ACL Classification. This mask is expressed using wild-card notation,which is the 1's compliment of traditional Subnet Masks. Here, the 'Don't care bits' are represented by binary 1's and  'Do care bits' are represented by binary 0's. 
.1.3.6.1.4.1.4526.10.3.2.4.1.11,FASTPATH-QOS-ACL-MIB::aclRuleDestL4Port,Integer32,read-create,,current,,The Destination Port (Layer 4) used in ACl classification.
.1.3.6.1.4.1.4526.10.3.2.4.1.12,FASTPATH-QOS-ACL-MIB::aclRuleDestL4PortRangeStart,Integer32,read-create,,current,,The Destination Port (Layer 4) starting range used in ACL classification.
.1.3.6.1.4.1.4526.10.3.2.4.1.13,FASTPATH-QOS-ACL-MIB::aclRuleDestL4PortRangeEnd,Integer32,read-create,,current,,The Destination Port (Layer 4) ending range used in ACL classification.
.1.3.6.1.4.1.4526.10.3.2.4.1.14,FASTPATH-QOS-ACL-MIB::aclRuleIPDSCP,Integer32,read-create,,current,,The Differentiated Services Code Point value.
.1.3.6.1.4.1.4526.10.3.2.4.1.15,FASTPATH-QOS-ACL-MIB::aclRuleIpPrecedence,Integer32,read-create,,current,,The Type of Service (TOS) IP Precedence value.
.1.3.6.1.4.1.4526.10.3.2.4.1.16,FASTPATH-QOS-ACL-MIB::aclRuleIpTosBits,Integer32,read-create,,current,,The Type of Service (TOS) Bits value.
.1.3.6.1.4.1.4526.10.3.2.4.1.17,FASTPATH-QOS-ACL-MIB::aclRuleIpTosMask,Integer32,read-create,,current,,The Type of Service (TOS) Mask value.
.1.3.6.1.4.1.4526.10.3.2.4.1.18,FASTPATH-QOS-ACL-MIB::aclRuleStatus,INTEGER,read-create,,current,active(1):notInService(2):notReady(3):createAndGo(4):createAndWait(5):destroy(6),Status of this instance.  active(1) - this ACL Rule is active createAndGo(4) - set to this value to create an instance destroy(6) - set to this value to delete an instance
.1.3.6.1.4.1.4526.10.3.2.4.1.19,FASTPATH-QOS-ACL-MIB::aclRuleAssignQueueId,Unsigned32,read-create,,current,,Queue identifier to which all inbound packets matching this  ACL rule are directed. This object defaults to the standard queue assignment for user priority 0 traffic per the IEEE 802.1D specification based on the number of assignable queues in the  system: 1-3 queues: 0 4-7 queues: 1 8 queues: 2 This default assignment is static and is not influenced by other system configuration changes.
.1.3.6.1.4.1.4526.10.3.2.4.1.20,FASTPATH-QOS-ACL-MIB::aclRuleRedirectIntf,Integer32,read-create,,current,,A non-zero value indicates the external ifIndex to which all  inbound packets matching this ACL rule are directed. A  value of zero means packet redirection is not in effect, which is the default value of this object. Note that packet redirection and mirroring (aclRuleMirrorIntf object) are mutually-exclusive rule attributes.
.1.3.6.1.4.1.4526.10.3.2.4.1.21,FASTPATH-QOS-ACL-MIB::aclRuleMatchEvery,INTEGER,read-create,,current,true(1):false(2),Flag to indicate that the ACL rule is defined to match on every IP packet,  regardless of content.
.1.3.6.1.4.1.4526.10.3.2.4.1.22,FASTPATH-QOS-ACL-MIB::aclRuleMirrorIntf,Integer32,read-create,,current,,A non-zero value indicates the external ifIndex to which all  inbound packets matching this ACL rule are copied. A  value of zero means packet mirroring is not in effect, which is the default value of this object. Note that packet mirroring and redirection (aclRuleRedirectIntf object) are mutually-exclusive rule attributes.
.1.3.6.1.4.1.4526.10.3.2.4.1.23,FASTPATH-QOS-ACL-MIB::aclRuleLogging,INTEGER,read-create,,current,true(1):false(2),Flag to indicate that the ACL rule is being logged.  A hardware count of the number of times this rule is hit is reported via the aclTrapRuleLogEvent notification. This object may be supported for an aclRuleAction  setting of permit(1) and/or deny(2), depending on the ACL feature capabilities of the device.
.1.3.6.1.4.1.4526.10.3.2.5,FASTPATH-QOS-ACL-MIB::aclMacGroup,,,,,,
.1.3.6.1.4.1.4526.10.3.2.5.1,FASTPATH-QOS-ACL-MIB::aclMacIndexNextFree,Integer32,read-only,,current,,This object contains an unused value for the aclMacIndex to be used when creating a new MAC ACL. A value of zero zero indicates the ACL table is full.
.1.3.6.1.4.1.4526.10.3.2.5.2,FASTPATH-QOS-ACL-MIB::aclMacTable,,not-accessible,,current,,A table of MAC ACL instances.
.1.3.6.1.4.1.4526.10.3.2.5.2.1,FASTPATH-QOS-ACL-MIB::aclMacEntry,,not-accessible,aclMacIndex,current,,
.1.3.6.1.4.1.4526.10.3.2.5.2.1.1,FASTPATH-QOS-ACL-MIB::aclMacIndex,Integer32,not-accessible,,current,,The MAC ACL table index this instance is associated with. When creating a new MAC ACL, refer to the aclMacIndexNextFree object to determine the next available aclMacIndex to use.
.1.3.6.1.4.1.4526.10.3.2.5.2.1.2,FASTPATH-QOS-ACL-MIB::aclMacName,OCTET,read-create,,current,,The name of this MAC ACL entry, which must consist of 1 to 31 alphanumeric characters and uniquely identify this MAC ACL. An existing MAC ACL can be renamed by setting this object to a new name. This object must be set to complete a new MAC ACL  row instance.
.1.3.6.1.4.1.4526.10.3.2.5.2.1.3,FASTPATH-QOS-ACL-MIB::aclMacStatus,INTEGER,read-create,,current,active(1):notInService(2):notReady(3):createAndGo(4):createAndWait(5):destroy(6),Status of this instance. ACL MAC entries can not be deleted until all rows in  the aclIfTable and aclRuleTable with corresponding values of aclMacIndex  have been deleted.  active(1) - this ACL instance is active createAndGo(4) - set to this value to create an instance destroy(6) - set to this value to delete an instance The aclMacName object must be set to complete this row instance.
.1.3.6.1.4.1.4526.10.3.2.5.3,FASTPATH-QOS-ACL-MIB::aclMacRuleTable,,not-accessible,,current,,A table of layer 2 MAC ACL Rule instances.
.1.3.6.1.4.1.4526.10.3.2.5.3.1,FASTPATH-QOS-ACL-MIB::aclMacRuleEntry,,not-accessible,aclMacIndex:aclMacRuleIndex,current,,A table of layer 2 MAC ACL Classification Rules
.1.3.6.1.4.1.4526.10.3.2.5.3.1.1,FASTPATH-QOS-ACL-MIB::aclMacRuleIndex,Integer32,not-accessible,,current,,The index of this rule instance within an MAC ACL.
.1.3.6.1.4.1.4526.10.3.2.5.3.1.2,FASTPATH-QOS-ACL-MIB::aclMacRuleAction,INTEGER,read-create,,current,permit(1):deny(2),The type of action this MAC ACL rule should perform.
.1.3.6.1.4.1.4526.10.3.2.5.3.1.3,FASTPATH-QOS-ACL-MIB::aclMacRuleCos,Unsigned32,read-create,,current,,The Class of Service (COS) used in the MAC ACL Classification. This is the three-bit user priority field in the 802.1Q tag  header of a tagged Ethernet frame. For frames containing a  double VLAN tag, this field is located in the first/outer tag.
.1.3.6.1.4.1.4526.10.3.2.5.3.1.4,FASTPATH-QOS-ACL-MIB::aclMacRuleCos2,Unsigned32,read-create,,current,,The Secondary Class of Service (COS2) used in the MAC ACL Classification. This is the three-bit user priority field in the second/inner 802.1Q  tag header of a double VLAN tagged Ethernet frame.
.1.3.6.1.4.1.4526.10.3.2.5.3.1.5,FASTPATH-QOS-ACL-MIB::aclMacRuleDestMacAddr,OCTET,read-create,,current,,The Destination MAC address used in the MAC ACL Classification.
.1.3.6.1.4.1.4526.10.3.2.5.3.1.6,FASTPATH-QOS-ACL-MIB::aclMacRuleDestMacMask,OCTET,read-create,,current,,The Destination MAC address mask used in the MAC ACL Classification.  This mask value identifies the portion of the aclMacRuleDestMacAddr that is compared against a packet. A non-contiguous mask value is  permitted.
.1.3.6.1.4.1.4526.10.3.2.5.3.1.7,FASTPATH-QOS-ACL-MIB::aclMacRuleEtypeKey,INTEGER,read-create,,current,custom(1):appletalk(2):arp(3):ibmsna(4):ipv4(5):ipv6(6):ipx(7):mplsmcast(8):mplsucast(9):netbios(10):novell(11):pppoe(12):rarp(13),The Ethertype keyword used in the MAC ACL Classification. A keyword of custom(1) requires that the aclMacRuleEtypeValue object also be set.
.1.3.6.1.4.1.4526.10.3.2.5.3.1.8,FASTPATH-QOS-ACL-MIB::aclMacRuleEtypeValue,Unsigned32,read-create,,current,,The Ethertype custom value used in the MAC ACL Classification. This object is only valid if the aclMacRuleEtypeKey is set to  custom(1). The allowed value for this object is 0x0600 to 0xFFFF (1536 to 65535).
.1.3.6.1.4.1.4526.10.3.2.5.3.1.9,FASTPATH-QOS-ACL-MIB::aclMacRuleSrcMacAddr,OCTET,read-create,,current,,The Source MAC address used in the MAC ACL Classification.
.1.3.6.1.4.1.4526.10.3.2.5.3.1.10,FASTPATH-QOS-ACL-MIB::aclMacRuleSrcMacMask,OCTET,read-create,,current,,The Source MAC address mask used in the MAC ACL Classification.  This mask value identifies the portion of the aclMacRuleSrcMacAddr that is compared against a packet. A non-contiguous mask value is  permitted.
.1.3.6.1.4.1.4526.10.3.2.5.3.1.11,FASTPATH-QOS-ACL-MIB::aclMacRuleVlanId,Unsigned32,read-create,,current,,The VLAN ID value used in the MAC ACL Classification. The VLAN ID field is defined as the 12-bit VLAN identifier in the 802.1Q tag header of a tagged Ethernet frame. This is  contained in the first/outer tag of a double VLAN tagged frame.
.1.3.6.1.4.1.4526.10.3.2.5.3.1.12,FASTPATH-QOS-ACL-MIB::aclMacRuleVlanIdRangeStart,Unsigned32,read-create,,current,,The VLAN ID range start value used in the MAC ACL Classification. Setting this value greater than the current aclMacRuleVlanIdRangeEnd changes the VLAN ID range end to the same value as the range start. The VLAN ID field is defined as the 12-bit VLAN identifier in the 802.1Q tag header of a tagged Ethernet frame. This is  contained in the first/outer tag of a double VLAN tagged frame.
.1.3.6.1.4.1.4526.10.3.2.5.3.1.13,FASTPATH-QOS-ACL-MIB::aclMacRuleVlanIdRangeEnd,Unsigned32,read-create,,current,,The VLAN ID range end value used in the MAC ACL Classification. Setting this value less than the current aclMacRuleVlanIdRangeStart changes the VLAN ID range start to the same value as the range end. The VLAN ID field is defined as the 12-bit VLAN identifier in the 802.1Q tag header of a tagged Ethernet frame. This is  contained in the first/outer tag of a double VLAN tagged frame.
.1.3.6.1.4.1.4526.10.3.2.5.3.1.14,FASTPATH-QOS-ACL-MIB::aclMacRuleVlanId2,Unsigned32,read-create,,current,,The Secondary VLAN ID value used in the MAC ACL Classification. The Secondary VLAN ID field is defined as the 12-bit VLAN identifier in the second/inner 802.1Q tag header of a double VLAN tagged Ethernet  frame.
.1.3.6.1.4.1.4526.10.3.2.5.3.1.15,FASTPATH-QOS-ACL-MIB::aclMacRuleVlanId2RangeStart,Unsigned32,read-create,,current,,The Secondary VLAN ID range start value used in the MAC ACL Classification. Setting this value greater than the current aclMacRuleVlanId2RangeEnd changes the Secondary VLAN ID range end to the same value as the range start. The Secondary VLAN ID field is defined as the 12-bit VLAN identifier in the second/inner 802.1Q tag header of a double VLAN tagged Ethernet  frame.
.1.3.6.1.4.1.4526.10.3.2.5.3.1.16,FASTPATH-QOS-ACL-MIB::aclMacRuleVlanId2RangeEnd,Unsigned32,read-create,,current,,The Secondary VLAN ID range end value used in the MAC ACL Classification. Setting this value less than the current aclMacRuleVlanId2RangeStart changes the Secondary VLAN ID range start to the same value as the range end. The Secondary VLAN ID field is defined as the 12-bit VLAN identifier in the second/inner 802.1Q tag header of a double VLAN tagged Ethernet  frame.
.1.3.6.1.4.1.4526.10.3.2.5.3.1.17,FASTPATH-QOS-ACL-MIB::aclMacRuleStatus,INTEGER,read-create,,current,active(1):notInService(2):notReady(3):createAndGo(4):createAndWait(5):destroy(6),Status of this instance.  active(1) - this ACL Rule is active createAndGo(4) - set to this value to create an instance destroy(6) - set to this value to delete an instance
.1.3.6.1.4.1.4526.10.3.2.5.3.1.18,FASTPATH-QOS-ACL-MIB::aclMacRuleAssignQueueId,Unsigned32,read-create,,current,,Queue identifier to which all inbound packets matching this  MAC ACL rule are directed. This object defaults to the standard queue assignment for user priority 0 traffic per the IEEE 802.1D specification based on the number of assignable queues in the  system: 1-3 queues: 0 4-7 queues: 1 8 queues: 2 This default assignment is static and is not influenced by other system configuration changes.
.1.3.6.1.4.1.4526.10.3.2.5.3.1.19,FASTPATH-QOS-ACL-MIB::aclMacRuleRedirectIntf,Integer32,read-create,,current,,A non-zero value indicates the external ifIndex to which all  inbound packets matching this MAC ACL rule are directed. A value of zero means packet redirection is not in effect, which is the default value of this object. Note that packet redirection and mirroring (aclMacRuleMirrorIntf object) are mutually-exclusive rule attributes.
.1.3.6.1.4.1.4526.10.3.2.5.3.1.20,FASTPATH-QOS-ACL-MIB::aclMacRuleMatchEvery,INTEGER,read-create,,current,true(1):false(2),Flag to indicate that the MAC ACL rule is defined to match all packets,  regardless of Ethertype.
.1.3.6.1.4.1.4526.10.3.2.5.3.1.21,FASTPATH-QOS-ACL-MIB::aclMacRuleMirrorIntf,Integer32,read-create,,current,,A non-zero value indicates the external ifIndex to which all  inbound packets matching this MAC ACL rule are copied. A value of zero means packet mirroring is not in effect, which is the default value of this object. Note that packet mirroring and redirection (aclMacRuleRedirectIntf object) are mutually-exclusive rule attributes.
.1.3.6.1.4.1.4526.10.3.2.5.3.1.22,FASTPATH-QOS-ACL-MIB::aclMacRuleLogging,INTEGER,read-create,,current,true(1):false(2),Flag to indicate that the ACL rule is being logged.  A hardware count of the number of times this rule is hit is reported via the aclTrapRuleLogEvent notification. This object may be supported for an aclMacRuleAction  setting of permit(1) and/or deny(2), depending on the ACL feature capabilities of the device.
.1.3.6.1.4.1.4526.10.3.2.9,FASTPATH-QOS-ACL-MIB::aclLoggingGroup,,,,,,
.1.3.6.1.4.1.4526.10.3.2.9.2,FASTPATH-QOS-ACL-MIB::aclTrapRuleIndex,Integer32,accessible-for-notify,,current,,The index of an ACL rule instance. Used by aclTrapRuleLogEvent trap.
.1.3.6.1.4.1.4526.10.3.2.9.3,FASTPATH-QOS-ACL-MIB::aclTrapRuleAction,INTEGER,accessible-for-notify,,current,permit(1):deny(2),The type of action this rule should perform, either  permit(1) or deny(2). Used by aclTrapRuleLogEvent trap.
.1.3.6.1.4.1.4526.10.3.2.9.4,FASTPATH-QOS-ACL-MIB::aclTrapRuleHitCount,Counter64,accessible-for-notify,,current,,Number of times the ACL rule was hit during the most recent logging interval. Used by aclTrapRuleLogEvent trap.
.1.3.6.1.4.1.4526.10.3.2.9.5,FASTPATH-QOS-ACL-MIB::aclTrapFlag,INTEGER,read-write,,current,enable(1):disable(2),ACL Trap Flag - Enables or disables ACL trap generation. When this value is set to enable(1), ACL traps are  sent from the switch when they occur.
.1.3.6.1.4.1.4526.10.3.2.10,FASTPATH-QOS-ACL-MIB::aclIpv6IndexNextFree,Integer32,read-only,,current,,This object contains an unused value for the aclIPv6Index to be used when creating a new IPv6 ACL. A value of zero zero indicates the ACL table is full.
.1.3.6.1.4.1.4526.10.3.2.11,FASTPATH-QOS-ACL-MIB::aclIpv6Table,,not-accessible,,current,,A table of Ipv6 ACL instances.
.1.3.6.1.4.1.4526.10.3.2.11.1,FASTPATH-QOS-ACL-MIB::aclIpv6Entry,,not-accessible,aclIpv6Index,current,,
.1.3.6.1.4.1.4526.10.3.2.11.1.1,FASTPATH-QOS-ACL-MIB::aclIpv6Index,Integer32,not-accessible,,current,,The IPv6 ACL table index this instance is associated with. When creating a new IPv6 ACL, refer to the aclIPv6IndexNextFree object to determine the next available aclIpv6Index to use.
.1.3.6.1.4.1.4526.10.3.2.11.1.2,FASTPATH-QOS-ACL-MIB::aclIpv6Name,OCTET,read-create,,current,,The name of this IPv6 ACL entry, which must consist of 1 to 31 alphanumeric characters and uniquely identify this IPv6 ACL. An existing IPv6 ACL can be renamed by setting this object to a new name. This object must be set to complete a new IPv6 ACL  row instance.
.1.3.6.1.4.1.4526.10.3.2.11.1.3,FASTPATH-QOS-ACL-MIB::aclIpv6Status,INTEGER,read-create,,current,active(1):notInService(2):notReady(3):createAndGo(4):createAndWait(5):destroy(6),Status of this instance.  active(1) - this ACL instance is active createAndGo(4) - set to this value to create an instance destroy(6) - set to this value to delete an instance The aclMacName object must be set to complete this row instance.
.1.3.6.1.4.1.4526.10.3.2.12,FASTPATH-QOS-ACL-MIB::aclIpv6RuleTable,,not-accessible,,current,,A table of IPv6 ACL Rule instances.
.1.3.6.1.4.1.4526.10.3.2.12.1,FASTPATH-QOS-ACL-MIB::aclIpv6RuleEntry,,not-accessible,aclIpv6Index:aclIpv6RuleIndex,current,,A table of IPv6 ACL Classification Rules
.1.3.6.1.4.1.4526.10.3.2.12.1.1,FASTPATH-QOS-ACL-MIB::aclIpv6RuleIndex,Integer32,not-accessible,,current,,The index of this rule instance within an IPv6 ACL.
.1.3.6.1.4.1.4526.10.3.2.12.1.2,FASTPATH-QOS-ACL-MIB::aclIpv6RuleAction,INTEGER,read-create,,current,permit(1):deny(2),The type of action this IPv6 ACL rule should perform.
.1.3.6.1.4.1.4526.10.3.2.12.1.3,FASTPATH-QOS-ACL-MIB::aclIpv6RuleLogging,INTEGER,read-create,,current,true(1):false(2),Flag to indicate that the ACL rule is being logged.  A hardware count of the number of times this rule is hit is reported via the aclTrapRuleLogEvent notification. This object may be supported for an aclIPv6RuleAction  setting of permit(1) and/or deny(2), depending on the ACL feature capabilities of the device.
.1.3.6.1.4.1.4526.10.3.2.12.1.4,FASTPATH-QOS-ACL-MIB::aclIpv6RuleAssignQueueId,Unsigned32,read-create,,current,,Queue identifier to which all inbound packets matching this  ACL rule are directed. This object defaults to the standard queue assignment for user priority 0 traffic per the IEEE 802.1D specification based on the number of assignable queues in the  system: 1-3 queues: 0 4-7 queues: 1 8 queues: 2 This default assignment is static and is not influenced by other system configuration changes.
.1.3.6.1.4.1.4526.10.3.2.12.1.5,FASTPATH-QOS-ACL-MIB::aclIpv6RuleRedirectIntf,Integer32,read-create,,current,,A non-zero value indicates the external ifIndex to which all  inbound packets matching this Ipv6 ACL rule are directed. A  value of zero means packet redirection is not in effect, which is the default value of this object. Note that packet redirection and mirroring (aclIpv6RuleMirrorIntf object) are mutually-exclusive rule attributes.
.1.3.6.1.4.1.4526.10.3.2.12.1.6,FASTPATH-QOS-ACL-MIB::aclIpv6RuleMirrorIntf,Integer32,read-create,,current,,A non-zero value indicates the external ifIndex to which all  inbound packets matching this IPv6 ACL rule are copied. A  value of zero means packet mirroring is not in effect, which is the default value of this object. Note that packet mirroring and redirection (aclIpv6RuleRedirectIntf object) are mutually-exclusive rule attributes.
.1.3.6.1.4.1.4526.10.3.2.12.1.7,FASTPATH-QOS-ACL-MIB::aclIpv6RuleMatchEvery,INTEGER,read-create,,current,true(1):false(2),Flag to indicate that the ACL rule is defined to match on every IP packet,  regardless of content.
.1.3.6.1.4.1.4526.10.3.2.12.1.8,FASTPATH-QOS-ACL-MIB::aclIpv6RuleProtocol,Integer32,read-create,,current,,icmp - 1 igmp - 2 ip - 4 tcp - 6 udp - 17 All values from 1 to 255 are valid.
.1.3.6.1.4.1.4526.10.3.2.12.1.9,FASTPATH-QOS-ACL-MIB::aclIpv6RuleSrcL4Port,Integer32,read-create,,current,,The Source Port Number (Layer 4) used in the ACL Classification.
.1.3.6.1.4.1.4526.10.3.2.12.1.10,FASTPATH-QOS-ACL-MIB::aclIpv6RuleSrcL4PortRangeStart,Integer32,read-create,,current,,The Source Port Number(Layer 4) range start.
.1.3.6.1.4.1.4526.10.3.2.12.1.11,FASTPATH-QOS-ACL-MIB::aclIpv6RuleSrcL4PortRangeEnd,Integer32,read-create,,current,,The Source Port Number(Layer 4) range end.
.1.3.6.1.4.1.4526.10.3.2.12.1.12,FASTPATH-QOS-ACL-MIB::aclIpv6RuleDestL4Port,Integer32,read-create,,current,,The Destination Port (Layer 4) used in ACl classification.
.1.3.6.1.4.1.4526.10.3.2.12.1.13,FASTPATH-QOS-ACL-MIB::aclIpv6RuleDestL4PortRangeStart,Integer32,read-create,,current,,The Destination Port (Layer 4) starting range used in ACL classification.
.1.3.6.1.4.1.4526.10.3.2.12.1.14,FASTPATH-QOS-ACL-MIB::aclIpv6RuleDestL4PortRangeEnd,Integer32,read-create,,current,,The Destination Port (Layer 4) ending range used in ACL classification.
.1.3.6.1.4.1.4526.10.3.2.12.1.15,FASTPATH-QOS-ACL-MIB::aclIpv6RuleStatus,INTEGER,read-create,,current,active(1):notInService(2):notReady(3):createAndGo(4):createAndWait(5):destroy(6),Status of this instance. active(1) - this ACL Rule is active createAndGo(4) - set to this value to create an instance destroy(6) - set to this value to delete an instance
.1.3.6.1.4.1.4526.10.3.2.12.1.16,FASTPATH-QOS-ACL-MIB::aclIpv6RuleFlowLabel,Integer32,read-create,,current,,Flow label is 20-bit number that is unique to an IPv6 packet, used by end  stations to signify quality-of-service handling in routers.
.1.3.6.1.4.1.4526.10.3.2.12.1.17,FASTPATH-QOS-ACL-MIB::aclIpv6RuleIPDSCP,Integer32,read-create,,current,,The Differentiated Services Code Point value.
.1.3.6.1.4.1.4526.10.3.2.12.1.18,FASTPATH-QOS-ACL-MIB::aclRuleSrcIpv6Prefix,OCTET,read-write,,current,,The Ipv6 Prefix Address configured on the Service Port.
.1.3.6.1.4.1.4526.10.3.2.12.1.19,FASTPATH-QOS-ACL-MIB::aclRuleSrcIpv6PrefixLength,Integer32,read-create,,current,,The Prefix Length.
.1.3.6.1.4.1.4526.10.3.2.12.1.20,FASTPATH-QOS-ACL-MIB::aclRuleDstIpv6Prefix,OCTET,read-write,,current,,The Ipv6 Prefix Address configured on the Service Port.
.1.3.6.1.4.1.4526.10.3.2.12.1.21,FASTPATH-QOS-ACL-MIB::aclRuleDstIpv6PrefixLength,Integer32,read-create,,current,,The Prefix Length.
.1.3.6.1.4.1.4526.10.3.2.13,FASTPATH-QOS-ACL-MIB::aclVlanTable,,not-accessible,,current,,A table of ACL VLAN instances per direction.
.1.3.6.1.4.1.4526.10.3.2.13.1,FASTPATH-QOS-ACL-MIB::aclVlanEntry,,not-accessible,aclVlanIndex:aclVlanDirection:aclVlanSequence:aclVlanAclType:aclVlanAclId,current,,
.1.3.6.1.4.1.4526.10.3.2.13.1.1,FASTPATH-QOS-ACL-MIB::aclVlanIndex,Integer32,not-accessible,,current,,The Vlan to which this ACL instance applies.
.1.3.6.1.4.1.4526.10.3.2.13.1.2,FASTPATH-QOS-ACL-MIB::aclVlanDirection,INTEGER,not-accessible,,current,inbound(1):outbound(2),The Vlan direction to which this ACL instance applies.
.1.3.6.1.4.1.4526.10.3.2.13.1.3,FASTPATH-QOS-ACL-MIB::aclVlanSequence,Unsigned32,not-accessible,,current,,The relative evaluation sequence of this ACL for this Vlan and direction. When multiple ACLs are allowed  for a given Vlan and direction, the sequence number  determines the order in which the list of ACLs are evaluated, with lower sequence numbers given higher precedence. The sequence number value is arbitrary, but must be a unique non-zero value for a given Vlan and direction.  Setting this object to an existing sequence number  value for a given Vlan and direction causes the  ACL corresponding to that value to be replaced with this ACL.
.1.3.6.1.4.1.4526.10.3.2.13.1.4,FASTPATH-QOS-ACL-MIB::aclVlanAclType,INTEGER,not-accessible,,current,ip(1):mac(2):ipv6(3),The type of this ACL, which is used to interpret the  aclVlanId object value. Each type of ACL uses its own numbering scheme for identification (see aclVlanAclId object for details). The aclVlanAclId object must be specified along with this  object.
.1.3.6.1.4.1.4526.10.3.2.13.1.5,FASTPATH-QOS-ACL-MIB::aclVlanAclId,Integer32,not-accessible,,current,,The ACL identifier value, which is interpreted based on the aclVlanType object. For the IP ACLs, the actual ACL number is its identifier as follows: IP standard ranges from 1-99, while  IP extended ranges from 100-199. Here, aclVlanAclId represents  aclIndex.  The MAC ACLs use an internally-generated index value  that is assigned when the ACL is created. Here, aclVlanAclId  represents aclMacIndex. The IPv6 ACLs use an internally-generated index value that is assigned when the ACL is created.Here, aclVlanAclId  represents aclIpv6Index. The aclVlanType object must be specified along with this object.
.1.3.6.1.4.1.4526.10.3.2.13.1.6,FASTPATH-QOS-ACL-MIB::aclVlanStatus,INTEGER,read-create,,current,active(1):notInService(2):notReady(3):createAndGo(4):createAndWait(5):destroy(6),Status of this instance.  active(1) - this ACL Vlan instance is active createAndGo(4) - set to this value to assign an ACL to a Vlan and direction destroy(6) - set to this value to remove an ACL from a Vlan and direction
.1.3.6.1.4.1.4526.10.3.2.14,FASTPATH-QOS-ACL-MIB::aclNamedIpv4IndexNextFree,Integer32,read-only,,current,,This object contains an unused value for the aclIndex to be used when creating a new named IPv4 ACL. A value of zero zero indicates the ACL table is full.
.1.3.6.1.4.1.4526.10.3.3,FASTPATH-QOS-COS-MIB::fastPathQOSCOS,,,,,,The MIB definitions for Quality of Service - CoS Flex package.
.1.3.6.1.4.1.4526.10.3.3.1,FASTPATH-QOS-COS-MIB::agentCosMapCfgGroup,,,,,,
.1.3.6.1.4.1.4526.10.3.3.1.1,FASTPATH-QOS-COS-MIB::agentCosMapIpPrecTable,,not-accessible,,current,,A table mapping evaluated IP precedence to Traffic  Class for a specific physical port. Traffic class  is a number in the range  (0..(dot1dPortNumTrafficClasses-1)).
.1.3.6.1.4.1.4526.10.3.3.1.1.1,FASTPATH-QOS-COS-MIB::agentCosMapIpPrecEntry,,not-accessible,agentCosMapIpPrecIntfIndex:agentCosMapIpPrecValue,current,,IP Precedence to Traffic Class mapping for a port.
.1.3.6.1.4.1.4526.10.3.3.1.1.1.1,FASTPATH-QOS-COS-MIB::agentCosMapIpPrecIntfIndex,Integer32,not-accessible,,current,,This is a unique index for an entry in the  agentCosMapIpPrecTable. A non-zero value indicates  the ifIndex for the corresponding interface entry  in the ifTable. A value of zero represents global configuration, which in turn causes all interface entries to be updated for a set operation, or  reflects the most recent global setting for a get operation.
.1.3.6.1.4.1.4526.10.3.3.1.1.1.2,FASTPATH-QOS-COS-MIB::agentCosMapIpPrecValue,Unsigned32,not-accessible,,current,,The IP precedence value contained in the received  frame. This value is only indicated in IP packets,  but is independent of both media-type and frame  tagging.  Non-IP packets are handled in accordance with the  dot1dPortDefaultUserPriority value of the ingress  port.
.1.3.6.1.4.1.4526.10.3.3.1.1.1.3,FASTPATH-QOS-COS-MIB::agentCosMapIpPrecTrafficClass,Unsigned32,read-write,,current,,Traffic class priority queue the received frame is  mapped to. This represents the actual configuration  setting the port is using.
.1.3.6.1.4.1.4526.10.3.3.1.2,FASTPATH-QOS-COS-MIB::agentCosMapIpDscpTable,,not-accessible,,current,,A table mapping evaluated IP DSCP to Traffic Class  for a specific physical port. Traffic class is a  number in the range  (0..(dot1dPortNumTrafficClasses-1)).
.1.3.6.1.4.1.4526.10.3.3.1.2.1,FASTPATH-QOS-COS-MIB::agentCosMapIpDscpEntry,,not-accessible,agentCosMapIpDscpIntfIndex:agentCosMapIpDscpValue,current,,IP DSCP to Traffic Class mapping for a port.
.1.3.6.1.4.1.4526.10.3.3.1.2.1.1,FASTPATH-QOS-COS-MIB::agentCosMapIpDscpIntfIndex,Integer32,not-accessible,,current,,This is a unique index for an entry in the  agentCosMapIpDscpTable. A non-zero value indicates  the ifIndex for the corresponding interface entry  in the ifTable. A value of zero represents global configuration, which in turn causes all interface entries to be updated for a set operation, or  reflects the most recent global setting for a get operation.
.1.3.6.1.4.1.4526.10.3.3.1.2.1.2,FASTPATH-QOS-COS-MIB::agentCosMapIpDscpValue,Unsigned32,not-accessible,,current,,The IP DSCP value contained in the received frame.  This value is only indicated in IP packets, but is  independent of both media-type and frame tagging.  Non-IP packets are handled in accordance with the  dot1dPortDefaultUserPriority value of the ingress  port.
.1.3.6.1.4.1.4526.10.3.3.1.2.1.3,FASTPATH-QOS-COS-MIB::agentCosMapIpDscpTrafficClass,Unsigned32,read-write,,current,,Traffic class priority queue the received frame is  mapped to.
.1.3.6.1.4.1.4526.10.3.3.1.3,FASTPATH-QOS-COS-MIB::agentCosMapIntfTrustTable,,not-accessible,,current,,Specifies the interface trust mode of operation for  a port. The trust mode setting determines which COS  mapping table is used for directing ingress packets  to a Traffic Class.
.1.3.6.1.4.1.4526.10.3.3.1.3.1,FASTPATH-QOS-COS-MIB::agentCosMapIntfTrustEntry,,not-accessible,agentCosMapIntfTrustIntfIndex,current,,COS interface trust mode.
.1.3.6.1.4.1.4526.10.3.3.1.3.1.1,FASTPATH-QOS-COS-MIB::agentCosMapIntfTrustIntfIndex,Integer32,not-accessible,,current,,This is a unique index for an entry in the  agentCosMapIntfTrustTable. A non-zero value indicates  the ifIndex for the corresponding interface entry  in the ifTable. A value of zero represents global configuration, which in turn causes all interface entries to be updated for a set operation, or  reflects the most recent global setting for a get operation.
.1.3.6.1.4.1.4526.10.3.3.1.3.1.2,FASTPATH-QOS-COS-MIB::agentCosMapIntfTrustMode,INTEGER,read-write,,current,untrusted(1):trustDot1p(2):trustIpPrecedence(3):trustIpDscp(4),The class of service trust mode of an interface.  When set to a trusted mode, the appropriate COS  mapping table is used as follows:  trustDot1p(2) : dot1dTrafficClassTable trustIpPrecedence(3): agentCosMapIpPrecTable trustIpDscp(4): agentCosMapIpDscpTable   For an untrusted(1) interface, packets are handled in  accordance with the dot1dPortDefaultUserPriority value  of the ingress port.
.1.3.6.1.4.1.4526.10.3.3.1.3.1.3,FASTPATH-QOS-COS-MIB::agentCosMapUntrustedTrafficClass,Unsigned32,read-only,,current,,The traffic class (i.e. hardware queue) to which all untrusted traffic is assigned. This includes all  traffic when the agentCosMapIntfTrustMode is set to  untrusted(1), or just non-IP packets when in  trustIpPrecedence(3) or trustIpDscp(4) modes. This is a read-only object that reflects the current setting of the dot1dPortDefaultUserPriority object as mapped  to a traffic class through the dot1dTrafficClassEntry.
.1.3.6.1.4.1.4526.10.3.3.2,FASTPATH-QOS-COS-MIB::agentCosQueueCfgGroup,,,,,,
.1.3.6.1.4.1.4526.10.3.3.2.1,FASTPATH-QOS-COS-MIB::agentCosQueueNumQueuesPerPort,Unsigned32,read-only,,current,,The number of configurable COS queues per port  supported by the hardware device.
.1.3.6.1.4.1.4526.10.3.3.2.2,FASTPATH-QOS-COS-MIB::agentCosQueueNumDropPrecedenceLevels,Unsigned32,read-only,,current,,The number of distinct drop precedence levels per  queue supported by the hardware device. These levels  are typically used when configuring the queue  management tail drop and WRED parameters.
.1.3.6.1.4.1.4526.10.3.3.2.3,FASTPATH-QOS-COS-MIB::agentCosQueueControlTable,,not-accessible,,current,,Table of class-of-service queue configuration  controls for the specified interface.
.1.3.6.1.4.1.4526.10.3.3.2.3.1,FASTPATH-QOS-COS-MIB::agentCosQueueControlEntry,,not-accessible,agentCosQueueIntfIndex,current,,Provides a general control mechanism that affects  all queues on a given interface.
.1.3.6.1.4.1.4526.10.3.3.2.3.1.1,FASTPATH-QOS-COS-MIB::agentCosQueueIntfIndex,Integer32,not-accessible,,current,,This is a unique index for an entry in the  agentCosQueueControlTable, agentCosQueueTable, or agentCosQueueMgmtTable. A non-zero value indicates  the ifIndex for the corresponding interface entry  in the ifTable. A value of zero represents global configuration, which in turn causes all interface entries to be updated for a set operation, or  reflects the most recent global setting for a get operation.
.1.3.6.1.4.1.4526.10.3.3.2.3.1.2,FASTPATH-QOS-COS-MIB::agentCosQueueIntfShapingRate,Unsigned32,read-write,,current,,Maximum bandwidth allowed for this interface as a  whole, typically used to shape the outbound  transmission rate. The value is specified in terms  of percentage of overall link speed for the port in  1% increments. A value of 0 means there is no  maximum bandwidth limit in effect and that the  interface is allowed to transmit up to its maximum  line rate (i.e., work conserving method).  The default value is 0.  When set to a non-zero value, the interface is  restricted to using at most the bandwidth specified  in this object for the outbound transmission rate  (i.e., non-work-conserving method). This bandwidth  value is independent of any per-queue maximum  bandwidth value(s) in effect for the interface, as  specified in the agentCosQueueMaxBandwidth ohject,  and should be considered as a second-level  transmission rate control mechanism that regulates  the output of the entire interface regardless of  which queues originate the outbound traffic.
.1.3.6.1.4.1.4526.10.3.3.2.3.1.3,FASTPATH-QOS-COS-MIB::agentCosQueueMgmtTypeIntf,INTEGER,read-write,,current,taildrop(1):wred(2),The management technique used for all queues on this  interface. If taildrop(1), then all new packets  presented to the queues are dropped based on some  maximum threshold value(s). If wred(2), then an  active queue management scheme is employed whereby  packet drop precedence is considered during times of  queue congestion using WRED parameters. The  necessary queue management parameters are specified  in the agentCosQueueMgmtTable for the corresponding  agentCosQueueIntfIndex value. The default for this object is taildrop(1).  Implementations that support this object but do not  support weighted RED must return taildrop(1) for this  value and must not allow a value of wred(2) to be set.
.1.3.6.1.4.1.4526.10.3.3.2.3.1.4,FASTPATH-QOS-COS-MIB::agentCosQueueWredDecayExponent,Unsigned32,read-write,,current,,The decay exponent value used with the weighted  random early discard (WRED) algorithm to determine  how quickly the average queue length calculation  reacts to the current length of the queue. A higher  value produces a slower response, meaning previously  sampled queue length values are factored into the  calculation for a longer period of time. The default  value is 9.  Use caution when changing this value from its  default. If set too low, short traffic bursts can  cause WRED to drop too many packets. If set too  high, WRED might not detect queue congestion in a  timely manner and becomes ineffective. The default  value should be sufficient for most users.  This object value is only used when the  agentCosQueueMgmtType is set to wred(2) and is  otherwise ignored.
.1.3.6.1.4.1.4526.10.3.3.2.3.1.5,FASTPATH-QOS-COS-MIB::agentCosQueueDefaultsRestore,INTEGER,read-write,,current,enable(1):disable(2),Causes the default values to be restored for all COS  queue objects defined for this interface. This  includes objects in the following tables:  agentCosQueueTable agentCosQueueMgmtTable  This object always reads as disable(2). This object may  only be set to enable(1), which immediately causes the  default value restoration action as described above.  In essence, this models a momentary-style push button  switch that triggers a restoration of the original  default values for all affected objects.
.1.3.6.1.4.1.4526.10.3.3.2.3.1.6,FASTPATH-QOS-COS-MIB::agentCosQueueIntfShapingRateUnits,INTEGER,read-only,,current,percent(1):kbps(2),Gets the units of the threshold value to percentage of port speed or kilobits per second (kbps).
.1.3.6.1.4.1.4526.10.3.3.2.4,FASTPATH-QOS-COS-MIB::agentCosQueueTable,,not-accessible,,current,,Table of class-of-service queue configuration  parameters for the specified interface.
.1.3.6.1.4.1.4526.10.3.3.2.4.1,FASTPATH-QOS-COS-MIB::agentCosQueueEntry,,not-accessible,agentCosQueueIntfIndex:agentCosQueueIndex,current,,Each entry describes a single class-of-service (COS)  queue for a given Interface Index. The number of  configurable COS queues for an interface vary based  on device capabilities. All objects defined for this table entry contain a  default value corresponding to a typical,  non-preferential treatment of packets traversing the  interface's COS queues.
.1.3.6.1.4.1.4526.10.3.3.2.4.1.1,FASTPATH-QOS-COS-MIB::agentCosQueueIndex,Unsigned32,not-accessible,,current,,The COS queue index, numbered 0 to (n-1), where n is  the total number of configurable interface queues for  the device as indicated by agentCosQueueNumQueuesPerPort. In general, a higher numbered queue index is used to  support higher priority traffic, although actual  operation may be altered via configuration through  this table.
.1.3.6.1.4.1.4526.10.3.3.2.4.1.2,FASTPATH-QOS-COS-MIB::agentCosQueueSchedulerType,INTEGER,read-write,,current,strict(1):weighted(2),The type of scheduling used for this queue. If  strict(1), then all traffic placed on this queue is  transmitted before any queue with a lower precedence  (lower agentCosQueueIndex). A weighted(2) scheme  gives this queue service relative to other weighted  queues based on their relative agentCosQueueMinBandwidth  object values. The default is weighted(2).
.1.3.6.1.4.1.4526.10.3.3.2.4.1.3,FASTPATH-QOS-COS-MIB::agentCosQueueMinBandwidth,Unsigned32,read-write,,current,,Minimum guaranteed bandwidth allotted to this queue.  The value is specified in terms of percentage of  overall link speed for the port in 1% increments. A  value of 0 means there is no guaranteed minimum  bandwidth in effect (best-effort service).  The default value is 0.  The sum of all agentCosQueueMinBandwidth object  values for the queues on the same interface must not  exceed 100%.  If the agentCosQueueMaxBandwidth corresponding to the  same agentCosQueueIndex on this interface is  currently set to a non-zero value, then setting this  object to a value greater than  agentCosQueueMaxBandwidth automatically updates  agentCosQueueMaxBandwidth to the same value to  maintain a proper relationship between the minimum  and maximum queue bandwidth specification.  The value of this object is ignored when  agentCosQueueSchedulerType is set to strict(1).
.1.3.6.1.4.1.4526.10.3.3.2.4.1.4,FASTPATH-QOS-COS-MIB::agentCosQueueMaxBandwidth,Unsigned32,read-write,,current,,Maximum bandwidth allowed for this queue, typically  used to shape the outbound transmission rate. The  value is specified in terms of percentage of overall  link speed for the port in 1% increments. A value  of 0 means there is no maximum bandwidth limit in  effect and that the queue is allowed to use any  available excess bandwidth (i.e., work conserving  method). The default value is 0.  When set to a non-zero value, the queue is restricted  to using at most the bandwidth specified in this  object for the outbound transmission rate (i.e.,  non-work-conserving method). Any non-zero value set  for this object must be equal to or greater than the  value of agentCosQueueMinBandwidth for the same  agentCosQueueIndex on this interface.
.1.3.6.1.4.1.4526.10.3.3.2.4.1.5,FASTPATH-QOS-COS-MIB::agentCosQueueMgmtType,INTEGER,read-write,,current,taildrop(1):wred(2),The queue depth management technique used when  per-queue specification is supported. If  taildrop(1), then all new packets presented to the  queue are dropped based on some maximum threshold  value(s). If wred(2), then an active queue management  scheme is employed whereby packet drop precedence is  considered during times of queue congestion using  WRED parameters. The necessary queue management  parameters are specified in the  agentCosQueueMgmtEntry for the corresponding  agentCosQueueIntfIndex and agentCosQueueIndex values. The default for this object is taildrop(1).  Implementations that do not support weighted RED must  return taildrop(1) for this value and must not allow  a value of wred(2) to be set.
.1.3.6.1.4.1.4526.10.3.3.2.5,FASTPATH-QOS-COS-MIB::agentCosQueueMgmtTable,,not-accessible,,current,,Table of class-of-service queue drop precedence  configuration parameters. The values in this table  are used based on the agentCosQueueMgmtType for the  corresponding agentCosQueueIntfIndex and agentCosQueueIndex  values. These parameters are specified for each  drop precedence level supported within a queue.
.1.3.6.1.4.1.4526.10.3.3.2.5.1,FASTPATH-QOS-COS-MIB::agentCosQueueMgmtEntry,,not-accessible,agentCosQueueIntfIndex:agentCosQueueIndex:agentCosQueueDropPrecIndex,current,,The individual objects in this table are specified  for each drop precedence level supported within a  particular queue on a given interface. Each object's  usage is based on the current setting of the  agentCosQueueMgmtType.   See the individual object descriptions for details.
.1.3.6.1.4.1.4526.10.3.3.2.5.1.1,FASTPATH-QOS-COS-MIB::agentCosQueueDropPrecIndex,Unsigned32,not-accessible,,current,,The COS queue drop precedence level, numbered 1 to  p, where p is the total number of drop precedences  supported per queue, as indicated by  agentCosQueueNumDropPrecedenceLevels. This is used as  the minor index into the table. Each supported drop  precedence level for a queue has its own set of  configuration parameters.  The actual number of drop precedence levels supported  depends on the device characteristics. For example,  some implementations may allow for three levels of  drop precedence (1/2/3, sometimes referred to as  green/yellow/red), some may support two levels  (1/2, or high/low), while others only one. Some devices  use the lowest (highest-numbered) drop precedence  level to represent non-TCP traffic.
.1.3.6.1.4.1.4526.10.3.3.2.5.1.2,FASTPATH-QOS-COS-MIB::agentCosQueueMgmtTailDropThreshold,Unsigned32,read-write,,obsolete,,Tail drop queue threshold above which all packets  are dropped for the current drop precedence level.  The value specifies the threshold based on a fraction  of the overall device queue size in terms of  sixteenths (0/16, 1/16, 2/16, ... 16/16). Since device  implementations vary, the actual value deployed may  be rounded up or down accordingly.   The default value is calculated from the  agentCosQueueIndex and agentCosQueueDropPrecIndex as  shown in the following table (values listed for drop  precedence levels 1, 2, and 3, respectively): Queue Index 0: 16, 14, 12 Queue Index 1: 16, 14, 12 Queue Index 2: 16, 14, 12 Queue Index 3: 16, 14, 12 Queue Index 4: 16, 14, 12 Queue Index 5: 16, 14, 12 Queue Index 6: 16, 14, 12 Queue Index 7: 16, 14, 12  This object is only used when agentCosQueueMgmtType  is set to taildrop(1).
.1.3.6.1.4.1.4526.10.3.3.2.5.1.3,FASTPATH-QOS-COS-MIB::agentCosQueueMgmtWredMinThreshold,Unsigned32,read-write,,obsolete,,Weighted RED minimum queue threshold, below which no  packets are dropped for the current drop precedence  level. The value specifies the threshold based on a  fraction of the overall device queue size in terms of  sixteenths (0/16, 1/16, 2/16, ... 16/16). Since device  implementations vary, the actual value deployed may  be rounded up or down accordingly.   The default value is calculated from the  agentCosQueueIndex and agentCosQueueDropPrecIndex as  shown in the following table (values listed for drop  precedence levels 1, 2, and 3, respectively): Queue Index 0: 8, 6, 4 Queue Index 1: 9, 7, 5 Queue Index 2: 10, 8, 6 Queue Index 3: 11, 9, 7 Queue Index 4: 12, 10, 8 Queue Index 5: 13, 11, 9 Queue Index 6: 14, 12, 10 Queue Index 7: 15, 13, 11  This object is only used when agentCosQueueMgmtType  is set to wred(2). Any value set for this object must  be equal to or less than the value of  agentCosQueueMgmtWredMaxThreshold.
.1.3.6.1.4.1.4526.10.3.3.2.5.1.4,FASTPATH-QOS-COS-MIB::agentCosQueueMgmtWredMaxThreshold,Unsigned32,read-write,,obsolete,,Weighted RED maximum queue threshold, above which  all packets are dropped for the current drop  precedence level. The value specifies the threshold  based on a fraction the overall device queue size in  terms of sixteenths (0/16, 1/16, 2/16, ... 16/16). Since  device implementations vary, the actual value  deployed may be rounded up or down accordingly.   The default value is calculated from the  agentCosQueueIndex and agentCosQueueDropPrecIndex as  shown in the following table (values listed for drop  precedence levels 1, 2, and 3, respectively): Queue Index 0: 16, 14, 12 Queue Index 1: 16, 14, 12 Queue Index 2: 16, 14, 12 Queue Index 3: 16, 14, 12 Queue Index 4: 16, 14, 12 Queue Index 5: 16, 14, 12 Queue Index 6: 16, 14, 12 Queue Index 7: 16, 14, 12  This object is only used when agentCosQueueMgmtType  is set to wred(2). Any value set for this object must  be equal to or greater than the value of  agentCosQueueMgmtWredMinThreshold.
.1.3.6.1.4.1.4526.10.3.3.2.5.1.5,FASTPATH-QOS-COS-MIB::agentCosQueueMgmtWredDropProbScale,Unsigned32,read-write,,obsolete,,A scaling factor used for the WRED calculation to  determine the packet drop probability for the current  drop precedence level. The value is specified as a  number S from 1-15 and is used in the formula: 1/(2** S), meaning one packet is dropped out of every (2** S). Packet dropping begins when  agentCosQueueMgmtWredMinThreshold is reached and  proceeds linearly up to the (2**S) value specified by  this object until the  agentCosQueueMgmtWredMaxThreshold is reached, beyond  which all packets are dropped. Smaller values of S  produce a steeper slope, hence a higher incidence of  randomly dropped packets.   The default value is 10, which corresponds to a drop  rate of 1 out of every (2**10)=1024 packets.   This object is only used when agentCosQueueMgmtType  is set to wred(2).
.1.3.6.1.4.1.4526.10.3.3.2.5.1.6,FASTPATH-QOS-COS-MIB::agentCosQueueMgmtPercentTailDropThreshold,Unsigned32,read-write,,current,,Tail drop queue threshold above which all packets  are dropped for the current drop precedence level.  The value specifies the threshold based on a percentage of the overall device queue size. Since device  implementations vary, the actual value deployed may  be rounded up or down accordingly.   The default value, for all queues, is 100% for drop  precedence 1 and non-TCP traffic, 90% and 80% for  drop precedences 2 and 3.  This object is only used when agentCosQueueMgmtType  is set to taildrop(1).
.1.3.6.1.4.1.4526.10.3.3.2.5.1.7,FASTPATH-QOS-COS-MIB::agentCosQueueMgmtPercentWredMinThreshold,Unsigned32,read-write,,current,,Weighted RED minimum queue threshold, below which no  packets are dropped for the current drop precedence  level. The value specifies the threshold based on a  percentage of the overall device queue size. Since device  implementations vary, the actual value deployed may  be rounded up or down accordingly.   The default value, for all queues, is 100% for non-TCP  traffic, 40%, 30% and 20% for TCP drop precedences 1, 2  and 3.  This object is only used when agentCosQueueMgmtType  is set to wred(2). Any value set for this object must  be equal to or less than the value of  agentCosQueueMgmtPercentWredMaxThreshold.
.1.3.6.1.4.1.4526.10.3.3.2.5.1.8,FASTPATH-QOS-COS-MIB::agentCosQueueMgmtPercentWredMaxThreshold,Unsigned32,read-write,,current,,Weighted RED maximum queue threshold, above which  all packets are dropped for the current drop  precedence level. The value specifies the threshold  based on a percentage of the overall device queue size.  Since device implementations vary, the actual value  deployed may be rounded up or down accordingly.   The default value, for all queues, is 100% for drop  precedence 1 and non-TCP traffic, 90% and 80% for  drop precedences 2 and 3.  This object is only used when agentCosQueueMgmtType  is set to wred(2). Any value set for this object must  be equal to or greater than the value of  agentCosQueueMgmtPercentWredMinThreshold.
.1.3.6.1.4.1.4526.10.3.3.2.5.1.9,FASTPATH-QOS-COS-MIB::agentCosQueueMgmtWredDropProbability,Unsigned32,read-write,,current,,A scaling factor used for the WRED calculation to  determine the packet drop probability for the current  drop precedence level. Packet dropping begins when  agentCosQueueMgmtWredMinThreshold is reached and  proceeds linearly up to the percentage value specified by  this object until the agentCosQueueMgmtWredMaxThreshold  is reached, beyond which all packets are dropped.   The default value is 10.   This object is only used when agentCosQueueMgmtType  is set to wred(2).
.1.3.6.1.4.1.4526.10.3.4,FASTPATH-QOS-AUTOVOIP-MIB::fastPathQOSAUTOVOIP,,,,,,The MIB definitions for Quality of Service - VoIP Flex package.
.1.3.6.1.4.1.4526.10.3.4.1,FASTPATH-QOS-AUTOVOIP-MIB::agentAutoVoIPCfgGroup,,,,,,
.1.3.6.1.4.1.4526.10.3.4.1.1,FASTPATH-QOS-AUTOVOIP-MIB::agentAutoVoIPTable,,not-accessible,,current,,A table providing configuration of Auto VoIP Profile.
.1.3.6.1.4.1.4526.10.3.4.1.1.1,FASTPATH-QOS-AUTOVOIP-MIB::agentAutoVoIPEntry,,not-accessible,agentAutoVoIPIntfIndex,current,,Auto VoIP Profile configuration for a port.
.1.3.6.1.4.1.4526.10.3.4.1.1.1.1,FASTPATH-QOS-AUTOVOIP-MIB::agentAutoVoIPIntfIndex,Integer32,not-accessible,,current,,This is a unique index for an entry in the  agentAutoVoIPTable. A non-zero value indicates  the ifIndex for the corresponding interface entry  in the ifTable. A value of zero represents global configuration, which in turn causes all interface entries to be updated for a set operation, or  reflects the most recent global setting for a get operation.
.1.3.6.1.4.1.4526.10.3.4.1.1.1.2,FASTPATH-QOS-AUTOVOIP-MIB::agentAutoVoIPMode,INTEGER,read-write,,current,enable(1):disable(2),Enables / disables AutoVoIP profile on an interface.
.1.3.6.1.4.1.4526.10.3.4.1.1.1.3,FASTPATH-QOS-AUTOVOIP-MIB::agentAutoVoIPCosQueue,Unsigned32,read-only,,current,,Cos Queue to which all VoIP traffic is mapped to.
.1.3.6.1.4.1.4526.10.3.5,FASTPATH-QOS-ISCSI-MIB::fastPathIscsiFlowAcceleration,,,,,,The MIB definitions for Quality of Service - iSCSI Flow Acceleration Flex package.
.1.3.6.1.4.1.4526.10.3.5.1,FASTPATH-QOS-ISCSI-MIB::agentIscsiFlowAccelerationGlobalConfigGroup,,,,,,
.1.3.6.1.4.1.4526.10.3.5.1.1,FASTPATH-QOS-ISCSI-MIB::agentIscsiFlowAccelerationEnable,INTEGER,read-write,,current,true(1):false(2),Enable/Disable iSCSI Flow Acceleration globally on the system.
.1.3.6.1.4.1.4526.10.3.5.1.2,FASTPATH-QOS-ISCSI-MIB::agentIscsiFlowAccelerationAgingTimeOut,INTEGER,read-write,,current,,The time in seconds that should pass before session is aged out after the last frame detected for the session.
.1.3.6.1.4.1.4526.10.3.5.1.3,FASTPATH-QOS-ISCSI-MIB::agentIscsiFlowAccelerationQosType,INTEGER,read-write,,current,vpt(0):dscp(1),Current type of QoS for iSCSI packets
.1.3.6.1.4.1.4526.10.3.5.1.4,FASTPATH-QOS-ISCSI-MIB::agentIscsiFlowAccelerationQosVptValue,Unsigned32,read-write,,current,,The value of VPT or DSCP, depends on agentIscsiFlowAccelerationQosType, that will be assigned to each iSCSI packet. The range of VPT value is 0..7
.1.3.6.1.4.1.4526.10.3.5.1.5,FASTPATH-QOS-ISCSI-MIB::agentIscsiFlowAccelerationQosDscpValue,Unsigned32,read-write,,current,,The value of VPT or DSCP, depends on agentIscsiFlowAccelerationQosType, that will be assigned to each iSCSI packet. The range of DSCP value is 0..63
.1.3.6.1.4.1.4526.10.3.5.1.6,FASTPATH-QOS-ISCSI-MIB::agentIscsiFlowAccelerationQosRemark,INTEGER,read-write,,current,true(1):false(2),Whether iSCSI frames with the configured VPT or DSCP when egressing the switch.
.1.3.6.1.4.1.4526.10.3.5.2,FASTPATH-QOS-ISCSI-MIB::agentIscsiFlowAccelerationTargetConfigTable,,not-accessible,,current,,The table for configuration of iSCSI target TCP port number, IP address, and name. It is indexed by  agentIscsiFlowAccelerationTargetConfigTcpPort and agentIscsiFlowAccelerationTargetConfigAddr.
.1.3.6.1.4.1.4526.10.3.5.2.1,FASTPATH-QOS-ISCSI-MIB::agentIscsiFlowAccelerationTargetConfigEntry,,not-accessible,agentIscsiFlowAccelerationTargetConfigTcpPort:agentIscsiFlowAccelerationTargetConfigAddr,current,,Row in the iSCSI Target configuration table.
.1.3.6.1.4.1.4526.10.3.5.2.1.1,FASTPATH-QOS-ISCSI-MIB::agentIscsiFlowAccelerationTargetConfigTcpPort,Unsigned32,not-accessible,,current,,The TCP port of configured target.
.1.3.6.1.4.1.4526.10.3.5.2.1.2,FASTPATH-QOS-ISCSI-MIB::agentIscsiFlowAccelerationTargetConfigAddr,IpAddress,not-accessible,,current,,Specifies the target address. If the target address is to be ignored the address should be 0.0.0.0.
.1.3.6.1.4.1.4526.10.3.5.2.1.3,FASTPATH-QOS-ISCSI-MIB::agentIscsiFlowAccelerationTargetConfigName,OCTET,read-create,,current,,The target IQN name. This text is not used to match on network traffic. It serves as an identifying comment for administrative convenience.
.1.3.6.1.4.1.4526.10.3.5.2.1.4,FASTPATH-QOS-ISCSI-MIB::agentIscsiFlowAccelerationTargetConfigStatus,INTEGER,read-create,,current,active(1):notInService(2):notReady(3):createAndGo(4):createAndWait(5):destroy(6),The status of the target. It's used to add/delete a target.  active(1) - this ACL instance is active createAndGo(4) - set to this value to create an instance destroy(6) - set to this value to delete an instance
.1.3.6.1.4.1.4526.10.3.5.3,FASTPATH-QOS-ISCSI-MIB::agentIscsiFlowAccelerationSessionTable,,not-accessible,,current,,A table that contains iSCSI sessions. It is indexed as assigned by system.
.1.3.6.1.4.1.4526.10.3.5.3.1,FASTPATH-QOS-ISCSI-MIB::agentIscsiFlowAccelerationSessionEntry,,not-accessible,agentIscsiFlowAccelerationSessionIndex,current,,An entry in the agentIscsiFlowAccelerationSessionTable.
.1.3.6.1.4.1.4526.10.3.5.3.1.1,FASTPATH-QOS-ISCSI-MIB::agentIscsiFlowAccelerationSessionIndex,Unsigned32,not-accessible,,current,,Numerical index of session table entry assigned by system. 
.1.3.6.1.4.1.4526.10.3.5.3.1.2,FASTPATH-QOS-ISCSI-MIB::agentIscsiFlowAccelerationTargetName,OCTET,read-only,,current,,The target name
.1.3.6.1.4.1.4526.10.3.5.3.1.3,FASTPATH-QOS-ISCSI-MIB::agentIscsiFlowAccelerationInitiatorName,OCTET,read-only,,current,,The initiator name
.1.3.6.1.4.1.4526.10.3.5.3.1.4,FASTPATH-QOS-ISCSI-MIB::agentIscsiFlowAccelerationSessionISID,OCTET,read-only,,current,,The ISID of current session.
.1.3.6.1.4.1.4526.10.3.5.3.1.5,FASTPATH-QOS-ISCSI-MIB::agentIscsiFlowAccelerationSessAgingTime,Unsigned32,read-only,,current,,The elapsed time in seconds since the traffic was detected on any connections associated with this session.
.1.3.6.1.4.1.4526.10.3.5.3.1.6,FASTPATH-QOS-ISCSI-MIB::agentIscsiFlowAccelerationSessionUpTime,Unsigned32,read-only,,current,,Time elapsed since the session was detected, in seconds.
.1.3.6.1.4.1.4526.10.3.5.4,FASTPATH-QOS-ISCSI-MIB::agentIscsiFlowAccelerationConnectionTable,,not-accessible,,current,,A table that contains iSCSI connections.  It is indexed as assigned by system.
.1.3.6.1.4.1.4526.10.3.5.4.1,FASTPATH-QOS-ISCSI-MIB::agentIscsiFlowAccelerationConnectionEntry,,not-accessible,agentIscsiFlowAccelerationConnectionIndex,current,,An entry in the agentIscsiFlowAccelerationConnectionTable.
.1.3.6.1.4.1.4526.10.3.5.4.1.1,FASTPATH-QOS-ISCSI-MIB::agentIscsiFlowAccelerationConnectionIndex,Unsigned32,not-accessible,,current,,Numerical index of connection table entry assigned by system. 
.1.3.6.1.4.1.4526.10.3.5.4.1.2,FASTPATH-QOS-ISCSI-MIB::agentIscsiFlowAccelerationConnectionTargetAddr,IpAddress,read-only,,current,,The connection target address.
.1.3.6.1.4.1.4526.10.3.5.4.1.3,FASTPATH-QOS-ISCSI-MIB::agentIscsiFlowAccelerationConnectionTargetPort,Unsigned32,read-only,,current,,The TCP port of connection target.
.1.3.6.1.4.1.4526.10.3.5.4.1.4,FASTPATH-QOS-ISCSI-MIB::agentIscsiFlowAccelerationConnectionInitiatorAddr,IpAddress,read-only,,current,,The connection initiator address.
.1.3.6.1.4.1.4526.10.3.5.4.1.5,FASTPATH-QOS-ISCSI-MIB::agentIscsiFlowAccelerationConnectionInitiatorPort,Unsigned32,read-only,,current,,The TCP port of connection initiator.
.1.3.6.1.4.1.4526.10.3.5.4.1.6,FASTPATH-QOS-ISCSI-MIB::agentIscsiFlowAccelerationConnectionCID,Unsigned32,read-only,,current,,The iSCSI CID for this connection.
.1.3.6.1.4.1.4526.10.3.5.4.1.7,FASTPATH-QOS-ISCSI-MIB::agentIscsiFlowAccelerationConnectionSessionIndex,Unsigned32,read-only,,current,,The index of the session associated with this connection. Refers to the index of agentIscsiFlowAccelerationSessionIndex in  agentIscsiFlowAccelerationSessionTable.
.1.3.6.1.4.1.4526.10.3.6,FASTPATH-QOS-DIFFSERV-EXTENSIONS-MIB::fastPathQOSDiffServExtensions,,,,,,
.1.3.6.1.4.1.4526.10.3.6.1,FASTPATH-QOS-DIFFSERV-EXTENSIONS-MIB::agentDiffServMIBObjects,,,,,,
.1.3.6.1.4.1.4526.10.3.6.1.1,FASTPATH-QOS-DIFFSERV-EXTENSIONS-MIB::agentDiffServClassifier,,,,,,
.1.3.6.1.4.1.4526.10.3.6.1.1.1,FASTPATH-QOS-DIFFSERV-EXTENSIONS-MIB::agentDiffServAuxMfClfrNextFree,Unsigned32,read-only,,current,,This object contains an unused value for agentDiffServAuxMfClfrId , or a zero to indicate that none exist.
.1.3.6.1.4.1.4526.10.3.6.1.1.2,FASTPATH-QOS-DIFFSERV-EXTENSIONS-MIB::agentDiffServAuxMfClfrTable,,not-accessible,,current,,A table of Auxiliary Multi-field Classifier filter entries that a system may use to identify IP traffic.
.1.3.6.1.4.1.4526.10.3.6.1.1.2.1,FASTPATH-QOS-DIFFSERV-EXTENSIONS-MIB::agentDiffServAuxMfClfrEntry,,not-accessible,agentDiffServAuxMfClfrId,current,,An IP Multi-field Classifier entry describes a single filter.
.1.3.6.1.4.1.4526.10.3.6.1.1.2.1.1,FASTPATH-QOS-DIFFSERV-EXTENSIONS-MIB::agentDiffServAuxMfClfrId,Unsigned32,not-accessible,,current,,An index that enumerates the Auxiliary MultiField Classifier filter entries. Managers obtain new values for row creation in this table by reading agentDiffServAuxMfClfrNextFree.
.1.3.6.1.4.1.4526.10.3.6.1.1.2.1.2,FASTPATH-QOS-DIFFSERV-EXTENSIONS-MIB::agentDiffServAuxMfClfrDstAddr,IpAddress,read-create,,current,,The IP address to match against the packet's destination IP address.
.1.3.6.1.4.1.4526.10.3.6.1.1.2.1.3,FASTPATH-QOS-DIFFSERV-EXTENSIONS-MIB::agentDiffServAuxMfClfrDstMask,IpAddress,read-create,,current,,This mask value identifies the portion of agentDiffServAuxMfClfrDstAddr that is compared against a packet.  A non-contiguous mask value is permitted. A mask of 0 indicates a match of any address.
.1.3.6.1.4.1.4526.10.3.6.1.1.2.1.4,FASTPATH-QOS-DIFFSERV-EXTENSIONS-MIB::agentDiffServAuxMfClfrSrcAddr,IpAddress,read-create,,current,,The IP address to match against the packet's source IP address.
.1.3.6.1.4.1.4526.10.3.6.1.1.2.1.5,FASTPATH-QOS-DIFFSERV-EXTENSIONS-MIB::agentDiffServAuxMfClfrSrcMask,IpAddress,read-create,,current,,This mask value identifies the portion of agentDiffServAuxMfClfrSrcAddr that is compared against a packet.  A non-contiguous mask value is permitted. A mask of 0 indicates a match of any address.
.1.3.6.1.4.1.4526.10.3.6.1.1.2.1.6,FASTPATH-QOS-DIFFSERV-EXTENSIONS-MIB::agentDiffServAuxMfClfrProtocol,Unsigned32,read-create,,current,,The IP protocol to match against the IPv4 protocol number. A value of 255 means match all. 
.1.3.6.1.4.1.4526.10.3.6.1.1.2.1.7,FASTPATH-QOS-DIFFSERV-EXTENSIONS-MIB::agentDiffServAuxMfClfrDstL4PortMin,Unsigned32,read-create,,current,,The minimum value that the layer-4 destination port number in the packet must have in order to match this classifier entry. 
.1.3.6.1.4.1.4526.10.3.6.1.1.2.1.8,FASTPATH-QOS-DIFFSERV-EXTENSIONS-MIB::agentDiffServAuxMfClfrDstL4PortMax,Unsigned32,read-create,,current,,The maximum value that the layer-4 destination port number in the  packet must have in order to match this classifier entry.  This value must be equal to or greater than the value specified for this entry in agentDiffServAuxMfClfrDstL4PortMin. 
.1.3.6.1.4.1.4526.10.3.6.1.1.2.1.9,FASTPATH-QOS-DIFFSERV-EXTENSIONS-MIB::agentDiffServAuxMfClfrSrcL4PortMin,Unsigned32,read-create,,current,,The minimum value that the layer-4 source port number in the packet must have in order to match this classifier entry. 
.1.3.6.1.4.1.4526.10.3.6.1.1.2.1.10,FASTPATH-QOS-DIFFSERV-EXTENSIONS-MIB::agentDiffServAuxMfClfrSrcL4PortMax,Unsigned32,read-create,,current,,The maximum value that the layer-4 source port number in the packet must have in order to match this classifier entry. This value must be equal to or greater than the value specified for this entry in diffServMultiFieldClfrSrcL4PortMin. 
.1.3.6.1.4.1.4526.10.3.6.1.1.2.1.11,FASTPATH-QOS-DIFFSERV-EXTENSIONS-MIB::agentDiffServAuxMfClfrCos,Integer32,read-create,,current,,Three-bit user priority field in the 802.1Q tag header of a tagged  Ethernet frame used as a class-match parameter. For frames  containing a double VLAN tag, this field is located in the first/outer tag. A value of -1 indicates that a specific COS value has not been defined and thus all COS values are considered a match.
.1.3.6.1.4.1.4526.10.3.6.1.1.2.1.12,FASTPATH-QOS-DIFFSERV-EXTENSIONS-MIB::agentDiffServAuxMfClfrTos,OCTET,read-create,,current,,IP TOS bits value, defined as all eight bits of the Service  Type octet in the IPv4 header. There are multiple, overlapping,  meanings of the TOS octet in use today: Precedence (bits 7-5): IP Precedence, values 0-7 DSCP (bits 7-2): IP DiffServ Code Point, values 0-63 TOS (bits 7-0): IP Type of Service, by bits, values 0-255 Each of these definitions can be produced using the appropriate agentDiffServAuxMfClfrTosMask mask value. These definitions are  mutually-exclusive, so only one is allowed for any given classifier element.
.1.3.6.1.4.1.4526.10.3.6.1.1.2.1.13,FASTPATH-QOS-DIFFSERV-EXTENSIONS-MIB::agentDiffServAuxMfClfrTosMask,OCTET,read-create,,current,,IP TOS bits mask value. It identifies the portion of  agentDiffServAuxMfClfrTos that is compared against a packet.  A non-contiguous mask value is permitted. A mask of 0 indicates a match of any TOS value. There are multiple, overlapping meanings of the TOS octet in use today. These are represented by the following specific mask values: Precedence (bits 7-5): 224 (bit mask '11100000') DSCP (bits 7-2): 252 (bit mask '11111100') TOS (bits 7-0): 255 (bit mask '11111111') Other mask values are also permitted.
.1.3.6.1.4.1.4526.10.3.6.1.1.2.1.14,FASTPATH-QOS-DIFFSERV-EXTENSIONS-MIB::agentDiffServAuxMfClfrDstMac,OCTET,read-create,,current,,Destination MAC address. 
.1.3.6.1.4.1.4526.10.3.6.1.1.2.1.15,FASTPATH-QOS-DIFFSERV-EXTENSIONS-MIB::agentDiffServAuxMfClfrDstMacMask,OCTET,read-create,,current,,Destination MAC address mask value. This mask value identifies the portion of agentDiffServAuxMfClfrDstMac  that is compared against a packet.  A non-contiguous mask value is permitted. A mask of 0 indicates a match of any MAC address.
.1.3.6.1.4.1.4526.10.3.6.1.1.2.1.16,FASTPATH-QOS-DIFFSERV-EXTENSIONS-MIB::agentDiffServAuxMfClfrSrcMac,OCTET,read-create,,current,,Source MAC address. 
.1.3.6.1.4.1.4526.10.3.6.1.1.2.1.17,FASTPATH-QOS-DIFFSERV-EXTENSIONS-MIB::agentDiffServAuxMfClfrSrcMacMask,OCTET,read-create,,current,,Source MAC address mask value. This mask value identifies the portion of agentDiffServAuxMfClfrSrcMac  that is compared against a packet.  A non-contiguous mask value is permitted. A mask of 0 indicates a match of any MAC address.
.1.3.6.1.4.1.4526.10.3.6.1.1.2.1.18,FASTPATH-QOS-DIFFSERV-EXTENSIONS-MIB::agentDiffServAuxMfClfrVlanId,Integer32,read-create,,obsolete,,VLAN ID value for the classifier. A value of -1 indicates that  a specific VLAN ID value has not been defined and thus all  VLAN ID values are considered a match.
.1.3.6.1.4.1.4526.10.3.6.1.1.2.1.19,FASTPATH-QOS-DIFFSERV-EXTENSIONS-MIB::agentDiffServAuxMfClfrStorage,INTEGER,read-create,,current,other(1):volatile(2):nonVolatile(3):permanent(4):readOnly(5),The storage type for this conceptual row. 
.1.3.6.1.4.1.4526.10.3.6.1.1.2.1.20,FASTPATH-QOS-DIFFSERV-EXTENSIONS-MIB::agentDiffServAuxMfClfrStatus,INTEGER,read-create,,current,active(1):notInService(2):notReady(3):createAndGo(4):createAndWait(5):destroy(6),The status of this conceptual row.
.1.3.6.1.4.1.4526.10.3.6.1.1.2.1.21,FASTPATH-QOS-DIFFSERV-EXTENSIONS-MIB::agentDiffServAuxMfClfrCos2,Integer32,read-create,,current,,Three-bit user priority field in the second/inner 802.1Q tag header of a  double VLAN tagged Ethernet frame used as a class-match parameter  A value of -1 indicates that a specific Secondary COS value has not been  defined and thus all Secondary COS values are considered a match.
.1.3.6.1.4.1.4526.10.3.6.1.1.2.1.22,FASTPATH-QOS-DIFFSERV-EXTENSIONS-MIB::agentDiffServAuxMfClfrEtypeVal1,Unsigned32,read-create,,current,,Ethertype value to be compared in order to match this classifier entry. The allowed value for this object is 0x0600 to 0xFFFF, with a value of  0 used to indicate this object is not involved in the classifier entry.
.1.3.6.1.4.1.4526.10.3.6.1.1.2.1.23,FASTPATH-QOS-DIFFSERV-EXTENSIONS-MIB::agentDiffServAuxMfClfrEtypeVal2,Unsigned32,read-create,,current,,A second Ethertype value to be compared in order to match  this classifier entry. This value is considered in addition to the value specified by agentDiffServAuxMfClfrEtypeVal1 and serves as a second possible match value (i.e. a packet can match either  EtypeVal1 or EtypeVal2). The allowed value for this object is 0x0600 to 0xFFFF, with a value of 0 used to indicate this object is not involved in the classifier entry.
.1.3.6.1.4.1.4526.10.3.6.1.1.2.1.24,FASTPATH-QOS-DIFFSERV-EXTENSIONS-MIB::agentDiffServAuxMfClfrVlanIdMin,Unsigned32,read-create,,current,,The minimum value that the VLAN ID in the packet must have in order to match this classifier entry. This field is defined as the 12-bit VLAN identifier in the 802.1Q tag header of a  tagged Ethernet frame. For a double VLAN tagged frame, this  field is contained in the first/outer tag.
.1.3.6.1.4.1.4526.10.3.6.1.1.2.1.25,FASTPATH-QOS-DIFFSERV-EXTENSIONS-MIB::agentDiffServAuxMfClfrVlanIdMax,Unsigned32,read-create,,current,,The maximum value that the VLAN ID in the packet must have in order to match this classifier entry. This field is defined as the 12-bit VLAN identifier in the 802.1Q tag header of a  tagged Ethernet frame. For a double VLAN tagged frame, this  field is contained in the first/outer tag. This value must be  equal to or greater than the value specified for the entry in  agentDiffServAuxMfClfrVlanIdMin.
.1.3.6.1.4.1.4526.10.3.6.1.1.2.1.26,FASTPATH-QOS-DIFFSERV-EXTENSIONS-MIB::agentDiffServAuxMfClfrVlanId2Min,Unsigned32,read-create,,current,,The minimum value that the Secondary VLAN ID in the packet must have in order to match this classifier entry. This field is defined as the 12-bit VLAN identifier in the second/inner 802.1Q tag header  of a double VLAN tagged Ethernet frame.
.1.3.6.1.4.1.4526.10.3.6.1.1.2.1.27,FASTPATH-QOS-DIFFSERV-EXTENSIONS-MIB::agentDiffServAuxMfClfrVlanId2Max,Unsigned32,read-create,,current,,The maximum value that the Secondary VLAN ID in the packet must have in order to match this classifier entry. This field is defined as the 12-bit VLAN identifier in the second/inner 802.1Q tag header of a double VLAN tagged Ethernet frame. This value must be equal to or  greater than the value specified for the entry in  agentDiffServAuxMfClfrVlanId2Min.
.1.3.6.1.4.1.4526.10.3.6.1.2,FASTPATH-QOS-DIFFSERV-EXTENSIONS-MIB::agentDiffServAction,,,,,,
.1.3.6.1.4.1.4526.10.3.6.1.2.2,FASTPATH-QOS-DIFFSERV-EXTENSIONS-MIB::agentDiffServCosMarkActTable,,not-accessible,,current,,This table enumerates specific Class of Service values used for marking or remarking the priority bits in the 802.1p header. The entries of this  table may be referenced by a diffServActionSpecific attribute.
.1.3.6.1.4.1.4526.10.3.6.1.2.2.1,FASTPATH-QOS-DIFFSERV-EXTENSIONS-MIB::agentDiffServCosMarkActEntry,,not-accessible,agentDiffServCosMarkActCos,current,,An entry in the COS mark action table that describes a single Class of Service value used for marking.
.1.3.6.1.4.1.4526.10.3.6.1.2.2.1.1,FASTPATH-QOS-DIFFSERV-EXTENSIONS-MIB::agentDiffServCosMarkActCos,Integer32,read-only,,current,,The Class of Service value that this Action will store into the priority bits of the 802.1p header. It is quite possible that the  only packets subject to this Action are already marked with this COS  value.
.1.3.6.1.4.1.4526.10.3.6.1.2.4,FASTPATH-QOS-DIFFSERV-EXTENSIONS-MIB::agentDiffServIpPrecMarkActTable,,not-accessible,,current,,This table enumerates specific IP Precedence values used for marking or remarking the Precedence field of IP packets. The entries of this  table may be referenced by a diffServActionSpecific attribute.
.1.3.6.1.4.1.4526.10.3.6.1.2.4.1,FASTPATH-QOS-DIFFSERV-EXTENSIONS-MIB::agentDiffServIpPrecMarkActEntry,,not-accessible,agentDiffServIpPrecMarkActPrecedence,current,,An entry in the IP Precedence mark action table that describes a single IP Precedence value used for marking.
.1.3.6.1.4.1.4526.10.3.6.1.2.4.1.1,FASTPATH-QOS-DIFFSERV-EXTENSIONS-MIB::agentDiffServIpPrecMarkActPrecedence,Integer32,read-only,,current,,The IP Precedence that this Action will store into the Precedence field of the IP packet. It is quite possible that the only packets  subject to this Action are already marked with this IP Precedence.  Note also that Differentiated Services processing may result in a packet being marked on both ingress to a network and on egress from  it, and that ingress and egress can occur in the same router.
.1.3.6.1.4.1.4526.10.3.6.1.2.5,FASTPATH-QOS-DIFFSERV-EXTENSIONS-MIB::agentDiffServCos2MarkActTable,,not-accessible,,current,,This table enumerates specific Secondary Class of Service values used for marking or remarking the priority bits in the second/inner 802.1Q tag header of a double VLAN tagged Ethernet packet. The entries of this table may be referenced by  a diffServActionSpecific attribute.
.1.3.6.1.4.1.4526.10.3.6.1.2.5.1,FASTPATH-QOS-DIFFSERV-EXTENSIONS-MIB::agentDiffServCos2MarkActEntry,,not-accessible,agentDiffServCos2MarkActCos,current,,An entry in the Secondary COS mark action table that describes a single Class of Service value used for marking.
.1.3.6.1.4.1.4526.10.3.6.1.2.5.1.1,FASTPATH-QOS-DIFFSERV-EXTENSIONS-MIB::agentDiffServCos2MarkActCos,Integer32,read-only,,current,,The Secondary Class of Service value that this Action will store into the priority bits of the second/inner 802.1p tag header. It is quite possible that the only packets subject to this Action are already marked with this COS value.
.1.3.6.1.4.1.4526.10.3.6.1.2.6,FASTPATH-QOS-DIFFSERV-EXTENSIONS-MIB::agentDiffServAssignQueueNextFree,Unsigned32,read-only,,current,,This object contains an unused value for agentDiffServAssignIndex, or a zero to indicate that none exist.
.1.3.6.1.4.1.4526.10.3.6.1.2.7,FASTPATH-QOS-DIFFSERV-EXTENSIONS-MIB::agentDiffServAssignQueueTable,,not-accessible,,current,,A table used for assigning a stream of Differentiated Services traffic to a specific quality of service (QoS) queue.  The traffic stream is identified by the upstream Functional  Data Path Element(s), i.e. by the object(s) that point to each entry in this table. This may include all traffic on an interface or just a portion thereof.
.1.3.6.1.4.1.4526.10.3.6.1.2.7.1,FASTPATH-QOS-DIFFSERV-EXTENSIONS-MIB::agentDiffServAssignQueueEntry,,not-accessible,agentDiffServAssignQueueIndex,current,,An entry in the assign queue table describes a specific (egress) QoS queue identifier for a traffic stream.
.1.3.6.1.4.1.4526.10.3.6.1.2.7.1.1,FASTPATH-QOS-DIFFSERV-EXTENSIONS-MIB::agentDiffServAssignQueueIndex,Unsigned32,not-accessible,,current,,An index that enumerates the Assign Queue entries. Managers obtain new values for row creation in this table by reading agentDiffServAssignQueueNextFree.
.1.3.6.1.4.1.4526.10.3.6.1.2.7.1.2,FASTPATH-QOS-DIFFSERV-EXTENSIONS-MIB::agentDiffServAssignQueueQnum,Unsigned32,read-create,,current,,The queue identifier value. This value indicates the QoS queue number to which the traffic stream for this data path is directed  for egress from the device.
.1.3.6.1.4.1.4526.10.3.6.1.2.7.1.3,FASTPATH-QOS-DIFFSERV-EXTENSIONS-MIB::agentDiffServAssignQueueStorage,INTEGER,read-create,,current,other(1):volatile(2):nonVolatile(3):permanent(4):readOnly(5),The storage type for this conceptual row. Conceptual rows having the value 'permanent' need not allow write-access to any columnar objects in the row.
.1.3.6.1.4.1.4526.10.3.6.1.2.7.1.4,FASTPATH-QOS-DIFFSERV-EXTENSIONS-MIB::agentDiffServAssignQueueStatus,INTEGER,read-create,,current,active(1):notInService(2):notReady(3):createAndGo(4):createAndWait(5):destroy(6),The status of this conceptual row. All writable objects in this row may be modified at any time. Setting this variable to 'destroy' when the MIB contains one or more RowPointers pointing to it results in destruction being delayed until the row is no longer used.
.1.3.6.1.4.1.4526.10.3.6.1.2.8,FASTPATH-QOS-DIFFSERV-EXTENSIONS-MIB::agentDiffServRedirectNextFree,Unsigned32,read-only,,current,,This object contains an unused value for agentDiffServRedirectId, or a zero to indicate that none exist.
.1.3.6.1.4.1.4526.10.3.6.1.2.9,FASTPATH-QOS-DIFFSERV-EXTENSIONS-MIB::agentDiffServRedirectTable,,not-accessible,,current,,A table used for redirecting a stream of Differentiated Services traffic to a specific egress interface, bypassing any normal device forwarding decision. The traffic stream is identified by  the upstream Functional Data Path Element(s), i.e. by the object(s)  that point to each entry in this table. This may include all traffic on an interface or just a portion thereof.
.1.3.6.1.4.1.4526.10.3.6.1.2.9.1,FASTPATH-QOS-DIFFSERV-EXTENSIONS-MIB::agentDiffServRedirectEntry,,not-accessible,agentDiffServRedirectId,current,,An entry in the redirect table describes a specific external interface number used as the egress point of a traffic stream.
.1.3.6.1.4.1.4526.10.3.6.1.2.9.1.1,FASTPATH-QOS-DIFFSERV-EXTENSIONS-MIB::agentDiffServRedirectId,Unsigned32,not-accessible,,current,,An index that enumerates the Redirect entries. Managers obtain new values for row creation in this table by reading agentDiffServRedirectNextFree.
.1.3.6.1.4.1.4526.10.3.6.1.2.9.1.2,FASTPATH-QOS-DIFFSERV-EXTENSIONS-MIB::agentDiffServRedirectIntf,Integer32,read-create,,current,,The external interface number identifier value. This value indicates  the egress interface to which the traffic stream for this data path is directed. Normal traffic forwarding decisions are bypassed.
.1.3.6.1.4.1.4526.10.3.6.1.2.9.1.3,FASTPATH-QOS-DIFFSERV-EXTENSIONS-MIB::agentDiffServRedirectStorage,INTEGER,read-create,,current,other(1):volatile(2):nonVolatile(3):permanent(4):readOnly(5),The storage type for this conceptual row. Conceptual rows having the value 'permanent' need not allow write-access to any columnar objects in the row.
.1.3.6.1.4.1.4526.10.3.6.1.2.9.1.4,FASTPATH-QOS-DIFFSERV-EXTENSIONS-MIB::agentDiffServRedirectStatus,INTEGER,read-create,,current,active(1):notInService(2):notReady(3):createAndGo(4):createAndWait(5):destroy(6),The status of this conceptual row. All writable objects in this row may be modified at any time. Setting this variable to 'destroy' when the MIB contains one or more RowPointers pointing to it results in destruction being delayed until the row is no longer used.
.1.3.6.1.4.1.4526.10.3.6.1.2.10,FASTPATH-QOS-DIFFSERV-EXTENSIONS-MIB::agentDiffServMirrorNextFree,Unsigned32,read-only,,current,,This object contains an unused value for agentDiffServMirrorId, or a zero to indicate that none exist.
.1.3.6.1.4.1.4526.10.3.6.1.2.11,FASTPATH-QOS-DIFFSERV-EXTENSIONS-MIB::agentDiffServMirrorTable,,not-accessible,,current,,A table used for mirroring a stream of Differentiated Services traffic to a specific egress interface, in addition to any normal device forwarding decision. The traffic stream is identified by  the upstream Functional Data Path Element(s), i.e. by the object(s)  that point to each entry in this table. This may include all traffic on an interface or just a portion thereof.
.1.3.6.1.4.1.4526.10.3.6.1.2.11.1,FASTPATH-QOS-DIFFSERV-EXTENSIONS-MIB::agentDiffServMirrorEntry,,not-accessible,agentDiffServMirrorId,current,,An entry in the mirror table describes a specific external interface number used as the egress point of a copied traffic stream.
.1.3.6.1.4.1.4526.10.3.6.1.2.11.1.1,FASTPATH-QOS-DIFFSERV-EXTENSIONS-MIB::agentDiffServMirrorId,Unsigned32,not-accessible,,current,,An index that enumerates the Mirror entries. Managers obtain new values for row creation in this table by reading agentDiffServMirrorNextFree.
.1.3.6.1.4.1.4526.10.3.6.1.2.11.1.2,FASTPATH-QOS-DIFFSERV-EXTENSIONS-MIB::agentDiffServMirrorIntf,Integer32,read-create,,current,,The external interface number identifier value. This value indicates  the egress interface to which the traffic stream for this data path is copied. Normal traffic forwarding decisions are still performed on the traffic stream.
.1.3.6.1.4.1.4526.10.3.6.1.2.11.1.3,FASTPATH-QOS-DIFFSERV-EXTENSIONS-MIB::agentDiffServMirrorStorage,INTEGER,read-create,,current,other(1):volatile(2):nonVolatile(3):permanent(4):readOnly(5),The storage type for this conceptual row. Conceptual rows having the value 'permanent' need not allow write-access to any columnar objects in the row.
.1.3.6.1.4.1.4526.10.3.6.1.2.11.1.4,FASTPATH-QOS-DIFFSERV-EXTENSIONS-MIB::agentDiffServMirrorStatus,INTEGER,read-create,,current,active(1):notInService(2):notReady(3):createAndGo(4):createAndWait(5):destroy(6),The status of this conceptual row. All writable objects in this row may be modified at any time. Setting this variable to 'destroy' when the MIB contains one or more RowPointers pointing to it results in destruction being delayed until the row is no longer used.
.1.3.6.1.4.1.4526.10.3.6.1.3,FASTPATH-QOS-DIFFSERV-EXTENSIONS-MIB::agentDiffServMeter,,,,,,
.1.3.6.1.4.1.4526.10.3.6.1.3.1,FASTPATH-QOS-DIFFSERV-EXTENSIONS-MIB::agentDiffServColorAwareTable,,not-accessible,,current,,A table used for augmenting the Differentiated Services meter information with information describing the packet coloration characteristics for a color-aware mode of policing. The  diffServMeterId is used as the index to this table, which logically extends the Meter table row with the columnar objects defined in this Color Aware table row.
.1.3.6.1.4.1.4526.10.3.6.1.3.1.1,FASTPATH-QOS-DIFFSERV-EXTENSIONS-MIB::agentDiffServColorAwareEntry,,not-accessible,,current,,An entry in the color aware table describes a single color conformance  level of a meter.
.1.3.6.1.4.1.4526.10.3.6.1.3.1.1.1,FASTPATH-QOS-DIFFSERV-EXTENSIONS-MIB::agentDiffServColorAwareLevel,INTEGER,read-create,,current,conform(1):exceed(2):unused(3),The metering conformance level of this table entry. A policing meter  represents either a conforming or an exceeding level of traffic in the traffic stream for this data path. The color characteristics used by the meter are relevant to this conformance level. This  object is set to unused(3) when the meter is not being used for policing.
.1.3.6.1.4.1.4526.10.3.6.1.3.1.1.2,FASTPATH-QOS-DIFFSERV-EXTENSIONS-MIB::agentDiffServColorAwareMode,INTEGER,read-create,,current,blind(1):awarecos(2):awarecos2(3):awareipdscp(4):awareipprec(5):awareunused(6),The color mode indicator for the meter. When set to blind(1),  metering is performed in a color-blind manner such that any  packet markings are ignored by the meter. The other values listed for this object indicate the packet field used for determining its pre-existing color marking. In color-aware mode, the  current color of a packet (e.g. green, yellow, red) influences the metering outcome. The object value awareunused(6) is  special in that it denotes that the specific field attributes are not specified for the meter even though a color aware scheme is in use for policing. This object always returns blind(1) when the  agentDiffServColorAwareLevel is set to unused(3).
.1.3.6.1.4.1.4526.10.3.6.1.3.1.1.3,FASTPATH-QOS-DIFFSERV-EXTENSIONS-MIB::agentDiffServColorAwareValue,Unsigned32,read-create,,current,,The value of the color aware table entry. This value is used  to compare the field indicated in agentDiffServColorAwareMode against packets in a traffic stream along the data path supplying the meter for a given conformance level. This object always returns 0 when the agentDiffServColorAwareMode is set to blind(1) or awareunused(6).
.1.3.6.1.4.1.4526.10.3.6.2,FASTPATH-QOS-DIFFSERV-EXTENSIONS-MIB::agentDiffServMIBAdmin,,,,,,
.1.3.6.1.4.1.4526.10.3.6.2.1,FASTPATH-QOS-DIFFSERV-EXTENSIONS-MIB::agentDiffServTBMeters,,,,,,
.1.3.6.1.4.1.4526.10.3.6.2.1.1,FASTPATH-QOS-DIFFSERV-EXTENSIONS-MIB::agentDiffServTBParamSimpleTokenBucketAware,,,,,,Two Parameter Token Bucket Meter as described in the Informal Differentiated Services Model section 5.2.3, but using a  color-aware mode of operation.
.1.3.6.1.4.1.4526.10.3.7,FASTPATH-QOS-DIFFSERV-PRIVATE-MIB::fastPathQOSDiffServPrivate,,,,,,The Netgear Private MIB for FASTPATH DiffServ
.1.3.6.1.4.1.4526.10.3.7.1,FASTPATH-QOS-DIFFSERV-PRIVATE-MIB::agentDiffServGenStatusGroup,,,,,,
.1.3.6.1.4.1.4526.10.3.7.1.1,FASTPATH-QOS-DIFFSERV-PRIVATE-MIB::agentDiffServGenStatusAdminMode,INTEGER,read-write,,current,enable(1):disable(2), DiffServ Admin Mode
.1.3.6.1.4.1.4526.10.3.7.1.2,FASTPATH-QOS-DIFFSERV-PRIVATE-MIB::agentDiffServGenStatusClassTableSize,Unsigned32,read-only,,current,, Current size of the Class Table
.1.3.6.1.4.1.4526.10.3.7.1.3,FASTPATH-QOS-DIFFSERV-PRIVATE-MIB::agentDiffServGenStatusClassTableMax,Unsigned32,read-only,,current,, Max size of the Class Table
.1.3.6.1.4.1.4526.10.3.7.1.4,FASTPATH-QOS-DIFFSERV-PRIVATE-MIB::agentDiffServGenStatusClassRuleTableSize,Unsigned32,read-only,,current,, Current size of Class Rule Table
.1.3.6.1.4.1.4526.10.3.7.1.5,FASTPATH-QOS-DIFFSERV-PRIVATE-MIB::agentDiffServGenStatusClassRuleTableMax,Unsigned32,read-only,,current,, Max size of the Class Rule Table.
.1.3.6.1.4.1.4526.10.3.7.1.6,FASTPATH-QOS-DIFFSERV-PRIVATE-MIB::agentDiffServGenStatusPolicyTableSize,Unsigned32,read-only,,current,, Current Size of the Policy Table.
.1.3.6.1.4.1.4526.10.3.7.1.7,FASTPATH-QOS-DIFFSERV-PRIVATE-MIB::agentDiffServGenStatusPolicyTableMax,Unsigned32,read-only,,current,, Max size of the Policy Table
.1.3.6.1.4.1.4526.10.3.7.1.8,FASTPATH-QOS-DIFFSERV-PRIVATE-MIB::agentDiffServGenStatusPolicyInstTableSize,Unsigned32,read-only,,current,, Current size of the Policy-Class Instance Table
.1.3.6.1.4.1.4526.10.3.7.1.9,FASTPATH-QOS-DIFFSERV-PRIVATE-MIB::agentDiffServGenStatusPolicyInstTableMax,Unsigned32,read-only,,current,, Max size of the Policy-Class Instance Table
.1.3.6.1.4.1.4526.10.3.7.1.10,FASTPATH-QOS-DIFFSERV-PRIVATE-MIB::agentDiffServGenStatusPolicyAttrTableSize,Unsigned32,read-only,,current,, Current size of the Policy Attribute Table
.1.3.6.1.4.1.4526.10.3.7.1.11,FASTPATH-QOS-DIFFSERV-PRIVATE-MIB::agentDiffServGenStatusPolicyAttrTableMax,Unsigned32,read-only,,current,, Max size of the Policy Attribute Table
.1.3.6.1.4.1.4526.10.3.7.1.12,FASTPATH-QOS-DIFFSERV-PRIVATE-MIB::agentDiffServGenStatusServiceTableSize,Unsigned32,read-only,,current,, Current size of the Service Table
.1.3.6.1.4.1.4526.10.3.7.1.13,FASTPATH-QOS-DIFFSERV-PRIVATE-MIB::agentDiffServGenStatusServiceTableMax,Unsigned32,read-only,,current,, Max size of the Service Table
.1.3.6.1.4.1.4526.10.3.7.2,FASTPATH-QOS-DIFFSERV-PRIVATE-MIB::agentDiffServClassGroup,,,,,,
.1.3.6.1.4.1.4526.10.3.7.2.1,FASTPATH-QOS-DIFFSERV-PRIVATE-MIB::agentDiffServClassIndexNextFree,Unsigned32,read-only,,current,,This object contains an unused value for classIndex, or a zero to indicate that none exists.
.1.3.6.1.4.1.4526.10.3.7.2.2,FASTPATH-QOS-DIFFSERV-PRIVATE-MIB::agentDiffServClassTable,,not-accessible,,current,,A table of the DiffServ class entries
.1.3.6.1.4.1.4526.10.3.7.2.2.1,FASTPATH-QOS-DIFFSERV-PRIVATE-MIB::agentDiffServClassEntry,,not-accessible,agentDiffServClassIndex,current,,Represents entry for a DiffServ traffic class
.1.3.6.1.4.1.4526.10.3.7.2.2.1.1,FASTPATH-QOS-DIFFSERV-PRIVATE-MIB::agentDiffServClassIndex,Unsigned32,not-accessible,,current,,The identifier for DiffServ Class entry 
.1.3.6.1.4.1.4526.10.3.7.2.2.1.2,FASTPATH-QOS-DIFFSERV-PRIVATE-MIB::agentDiffServClassName,OCTET,read-create,,current,,Name of the DiffServ traffic class
.1.3.6.1.4.1.4526.10.3.7.2.2.1.3,FASTPATH-QOS-DIFFSERV-PRIVATE-MIB::agentDiffServClassType,INTEGER,read-create,,current,all(1):any(2):acl(3),The class type indicates how the individual class match  criteria are evaluated. For type all, all of the  individual match conditions must be true for a packet to be considered a member of the class. For types any and  acl, only one of the match criteria must be true for a  packet to belong to the class; multiple matching criteria are evaluated in a sequential order, with the highest  precedence awarded to the first criterion defined for the class. An acl class type copies its set of match criteria from the current rule definition of the specified  ACL number.
.1.3.6.1.4.1.4526.10.3.7.2.2.1.4,FASTPATH-QOS-DIFFSERV-PRIVATE-MIB::agentDiffServClassAclNum,Unsigned32,read-create,,current,,The access list number used to define the match conditions for the  DiffServ class. This attribute is only valid if the value of agentDiffServClassType is set to acl(3). Match conditions are copied from the ACL definition at the time the class is created and do not reflect subsequent changes to the ACL definition. This attribute requires that the agentDiffServClassAclType object also be set so that the ACL number can be interpreted relative to  ip(1) or mac(2) ACLs. The objects may be set in either order.  The FASTPATH-QOS-ACL-MIB defines an aclIndex for IP ACLs and an  aclMacIndex for MAC ACLs. Setting this object to one of these values per the agentDiffServClassAclType causes the corresponding ACL rules to be used for creating the DiffServ class.
.1.3.6.1.4.1.4526.10.3.7.2.2.1.5,FASTPATH-QOS-DIFFSERV-PRIVATE-MIB::agentDiffServClassRuleIndexNextFree,Unsigned32,read-only,,current,,This object contains an unused value for classRuleIndex, or a zero to indicate that none exists. This index is maintained on a per-class basis.
.1.3.6.1.4.1.4526.10.3.7.2.2.1.6,FASTPATH-QOS-DIFFSERV-PRIVATE-MIB::agentDiffServClassStorageType,INTEGER,read-create,,current,other(1):volatile(2):nonVolatile(3):permanent(4):readOnly(5),Storage-type for this conceptual row
.1.3.6.1.4.1.4526.10.3.7.2.2.1.7,FASTPATH-QOS-DIFFSERV-PRIVATE-MIB::agentDiffServClassRowStatus,INTEGER,read-create,,current,active(1):notInService(2):notReady(3):createAndGo(4):createAndWait(5):destroy(6),The status of this conceptual row. All RowStatus operations are permitted. Other columns in this row may be modified when the status is 'active'. Entries can not be deleted until all rows in agentDiffServClassRuleTable with corresponding values of agentDiffServClassIndex have been deleted.
.1.3.6.1.4.1.4526.10.3.7.2.2.1.8,FASTPATH-QOS-DIFFSERV-PRIVATE-MIB::agentDiffServClassAclType,INTEGER,read-create,,current,ip(1):mac(2):ipv6(3),The access list type used to define the match conditions for the  DiffServ class. This attribute is only valid if the value of  agentDiffServClassType is set to acl(3). When this attribute is set to ip(1), the agentDiffServClassAclNum object is interpreted as an IP ACL number per the aclIndex definition from the FASTPATH-QOS-ACL-MIB. When set to mac(2), the agentDiffServClassAclNum object is interpreted as a MAC ACL index per the aclMacIndex definition in the FASTPATH-QOS-ACL-MIB. When set to ipv6(3), the agentDiffServClassAclNum object is interpreted as a IPv6 ACL index per the aclIpv6Index definition in the FASTPATH-QOS-ACL-MIB. All these objects and agentDiffServClassAclNum must be set (in either order) for an agentDiffServClassType of acl(3).
.1.3.6.1.4.1.4526.10.3.7.2.2.1.9,FASTPATH-QOS-DIFFSERV-PRIVATE-MIB::agentDiffServClassProtoType,INTEGER,read-create,,current,ipv4(1):ipv6(2),The diffserv class protocol type used to indicate how to interpret any layer 3.  This attribute is only valid if the value of agentDiffServClassProtoType  is set to all(1) or any(2).
.1.3.6.1.4.1.4526.10.3.7.2.3,FASTPATH-QOS-DIFFSERV-PRIVATE-MIB::agentDiffServClassRuleTable,,not-accessible,,current,,A table of the DiffServ Class Rule entries
.1.3.6.1.4.1.4526.10.3.7.2.3.1,FASTPATH-QOS-DIFFSERV-PRIVATE-MIB::agentDiffServClassRuleEntry,,not-accessible,agentDiffServClassIndex:agentDiffServClassRuleIndex,current,,Represents entry for a set of class-match rules
.1.3.6.1.4.1.4526.10.3.7.2.3.1.1,FASTPATH-QOS-DIFFSERV-PRIVATE-MIB::agentDiffServClassRuleIndex,Unsigned32,not-accessible,,current,,The identifier for DiffServ Class Rule Table entry within a class
.1.3.6.1.4.1.4526.10.3.7.2.3.1.2,FASTPATH-QOS-DIFFSERV-PRIVATE-MIB::agentDiffServClassRuleMatchEntryType,INTEGER,read-create,,current,cos(1):dstip(2):dstl4port(3):dstmac(4):every(5):ipdscp(6):ipprecedence(7):iptos(8):protocol(9):refclass(10):srcip(11):srcl4port(12):srcmac(13):vlan(14):cos2(15):etype(16):vlanid(17):vlanid2(18):flowLabel(19):srcPrefix(20):dstPrefix(21),Class Rule match entry type, it determines which one of the individual  match conditions is defined for the present class rule. This object must be created before any other match object in this row.
.1.3.6.1.4.1.4526.10.3.7.2.3.1.3,FASTPATH-QOS-DIFFSERV-PRIVATE-MIB::agentDiffServClassRuleMatchCos,Unsigned32,read-create,,current,,Three-bit user priority field in the 802.1Q tag header of a tagged  Ethernet frame used as a class-match parameter - only valid if the  agentDiffServClassRuleMatchEntryType is set to cos(1). For frames containing a double VLAN tag, this field is located in the first/outer tag.
.1.3.6.1.4.1.4526.10.3.7.2.3.1.4,FASTPATH-QOS-DIFFSERV-PRIVATE-MIB::agentDiffServClassRuleMatchDstIpAddr,IpAddress,read-create,,current,,Destination IP address match value for the class - only valid if the  agentDiffServClassRuleMatchEntryType is set to dstip(2).
.1.3.6.1.4.1.4526.10.3.7.2.3.1.5,FASTPATH-QOS-DIFFSERV-PRIVATE-MIB::agentDiffServClassRuleMatchDstIpMask,IpAddress,read-create,,current,,Destination IP address mask match value for the class - only valid if the  agentDiffServClassRuleMatchEntryType is set to dstip(2). This mask value identifies the portion of agentDiffServClassRuleMatchDstIpAddr that is  compared against a packet. A non-contiguous mask value is permitted.
.1.3.6.1.4.1.4526.10.3.7.2.3.1.6,FASTPATH-QOS-DIFFSERV-PRIVATE-MIB::agentDiffServClassRuleMatchDstL4PortStart,Unsigned32,read-create,,current,,Destination layer 4 port range start match value for the class - only  valid if the agentDiffServClassRuleMatchEntryType is set to dstl4port(3).
.1.3.6.1.4.1.4526.10.3.7.2.3.1.7,FASTPATH-QOS-DIFFSERV-PRIVATE-MIB::agentDiffServClassRuleMatchDstL4PortEnd,Unsigned32,read-create,,current,,Destination layer 4 port range end match value for the class - only valid if the agentDiffServClassRuleMatchEntryType is set to dstl4port(3).
.1.3.6.1.4.1.4526.10.3.7.2.3.1.8,FASTPATH-QOS-DIFFSERV-PRIVATE-MIB::agentDiffServClassRuleMatchDstMacAddr,OCTET,read-create,,current,,Destination MAC address match value for the class - only valid if the  agentDiffServClassRuleMatchEntryType is set to dstmac(4).
.1.3.6.1.4.1.4526.10.3.7.2.3.1.9,FASTPATH-QOS-DIFFSERV-PRIVATE-MIB::agentDiffServClassRuleMatchDstMacMask,OCTET,read-create,,current,,Destination MAC address mask match value for the class - only valid if the  agentDiffServClassRuleMatchEntryType is set to dstmac(4). This mask value identifies the portion of agentDiffServClassRuleMatchDstMacAddr that is  compared against a packet. A non-contiguous mask value is permitted.
.1.3.6.1.4.1.4526.10.3.7.2.3.1.10,FASTPATH-QOS-DIFFSERV-PRIVATE-MIB::agentDiffServClassRuleMatchEvery,INTEGER,read-only,,current,true(1):false(2),Flag to indicate that the class rule is defined to match on every packet,  regardless of content. - only valid if the  agentDiffServClassRuleMatchEntryType is set to every(5).
.1.3.6.1.4.1.4526.10.3.7.2.3.1.11,FASTPATH-QOS-DIFFSERV-PRIVATE-MIB::agentDiffServClassRuleMatchIpDscp,Unsigned32,read-create,,current,,IP DiffServ Code Point (DSCP) match value for the class - only valid if  the agentDiffServClassRuleMatchEntryType is set to ipdscp(6). The DSCP  is defined as the high-order six bits of the Service Type octet in the  IPv4 header.
.1.3.6.1.4.1.4526.10.3.7.2.3.1.12,FASTPATH-QOS-DIFFSERV-PRIVATE-MIB::agentDiffServClassRuleMatchIpPrecedence,Unsigned32,read-create,,current,,IP Precedence match value for the class - only valid if the  agentDiffServClassRuleMatchEntryType is set to ipprecedence(7). The Precedence bits are defined as the high-order three bits of the Service Type octed in the IPv4 header.
.1.3.6.1.4.1.4526.10.3.7.2.3.1.13,FASTPATH-QOS-DIFFSERV-PRIVATE-MIB::agentDiffServClassRuleMatchIpTosBits,OCTET,read-create,,current,,IP TOS bits match value for the class - only valid if the  agentDiffServClassRuleMatchEntryType is set to iptos(8). The TOS bits are defined as all eight bits of the Service  Type octet in the IPv4 header.
.1.3.6.1.4.1.4526.10.3.7.2.3.1.14,FASTPATH-QOS-DIFFSERV-PRIVATE-MIB::agentDiffServClassRuleMatchIpTosMask,OCTET,read-create,,current,,IP TOS bits mask match value for the class - only valid if the  agentDiffServClassRuleMatchEntryType is set to iptos(8). This mask value identifies the portion of agentDiffServClassRuleMatchIpTosBits that  is compared against a packet. A non-contiguous mask value is permitted.
.1.3.6.1.4.1.4526.10.3.7.2.3.1.15,FASTPATH-QOS-DIFFSERV-PRIVATE-MIB::agentDiffServClassRuleMatchProtocolNum,Unsigned32,read-create,,current,,Protocol number match value for the class - only valid if the  agentDiffServClassRuleMatchEntryType is set to protocol(9).
.1.3.6.1.4.1.4526.10.3.7.2.3.1.16,FASTPATH-QOS-DIFFSERV-PRIVATE-MIB::agentDiffServClassRuleMatchRefClassIndex,Unsigned32,read-create,,current,,Index of the corresponding referenced class - only valid if the  agentDiffServClassRuleMatchEntryType is set to refclass(10). The set of match conditions defined for the reference class  are directly inherited by the current class.  Restrictions: 1) The class types of both, current class and the reference class must be identical (i.e., any vs. any, or all vs. all). 2) Self-referencing of class-name is not allowed. 3) Any attempt to delete the reference class while still  referenced by any class shall fail.  4) The combined match criteria of classname and reference class name must be an allowed combination based on the class type. Any subsequent changes to the reference class name match  criteria must maintain this validity, or the change attempt shall fail.
.1.3.6.1.4.1.4526.10.3.7.2.3.1.17,FASTPATH-QOS-DIFFSERV-PRIVATE-MIB::agentDiffServClassRuleMatchSrcIpAddr,IpAddress,read-create,,current,,Source IP address match value for the class - only valid if the  agentDiffServClassRuleMatchEntryType is set to srcip(11).
.1.3.6.1.4.1.4526.10.3.7.2.3.1.18,FASTPATH-QOS-DIFFSERV-PRIVATE-MIB::agentDiffServClassRuleMatchSrcIpMask,IpAddress,read-create,,current,,Source IP address mask match value for the class - only valid if the  agentDiffServClassRuleMatchEntryType is set to srcip(11). This mask value identifies the portion of agentDiffServClassRuleMatchSrcIpAddr that  is compared against a packet. A non-contiguous mask value is permitted.
.1.3.6.1.4.1.4526.10.3.7.2.3.1.19,FASTPATH-QOS-DIFFSERV-PRIVATE-MIB::agentDiffServClassRuleMatchSrcL4PortStart,Unsigned32,read-create,,current,,Source layer 4 port range start match value for the class - only valid if  the agentDiffServClassRuleMatchEntryType is set to srcl4port(12).
.1.3.6.1.4.1.4526.10.3.7.2.3.1.20,FASTPATH-QOS-DIFFSERV-PRIVATE-MIB::agentDiffServClassRuleMatchSrcL4PortEnd,Unsigned32,read-create,,current,,Source layer 4 port range end match value for the class - only valid if  the agentDiffServClassRuleMatchEntryType is set to srcl4port(12).
.1.3.6.1.4.1.4526.10.3.7.2.3.1.21,FASTPATH-QOS-DIFFSERV-PRIVATE-MIB::agentDiffServClassRuleMatchSrcMacAddr,OCTET,read-create,,current,,Source MAC address match value for the class - only valid if the  agentDiffServClassRuleMatchEntryType is set to srcmac(13).
.1.3.6.1.4.1.4526.10.3.7.2.3.1.22,FASTPATH-QOS-DIFFSERV-PRIVATE-MIB::agentDiffServClassRuleMatchSrcMacMask,OCTET,read-create,,current,,Source MAC address mask match value for the class - only valid if the  agentDiffServClassRuleMatchEntryType is set to srcmac(13). This mask value identifies the portion of agentDiffServClassRuleMatchSrcMacAddr that  is compared against a packet. A non-contiguous mask value is permitted.
.1.3.6.1.4.1.4526.10.3.7.2.3.1.23,FASTPATH-QOS-DIFFSERV-PRIVATE-MIB::agentDiffServClassRuleMatchVlanId,Unsigned32,read-create,,obsolete,,VLAN ID match value for the class - only valid if the  agentDiffServClassRuleMatchEntryType is set to vlan(14). This object is obsoleted by agentDiffServClassRuleMatchVlanIdStart and agentDiffServClassRuleMatchVlanIdEnd.
.1.3.6.1.4.1.4526.10.3.7.2.3.1.24,FASTPATH-QOS-DIFFSERV-PRIVATE-MIB::agentDiffServClassRuleMatchExcludeFlag,INTEGER,read-create,,current,true(1):false(2),Class Rule exclude flag - when set to true(1), the match condition  identified by agentDiffServClassRuleMatchEntryType is negated. This means that for a given field, every value is considered to be a match EXCEPT for  the value specified in the class rule. This flag must be false(2) for an  agendDiffServClassRuleMatchEntryType of refClass(10). This object must be set after the agentDiffServClassRuleMatchEntryType  object, but before any other match object in this row
.1.3.6.1.4.1.4526.10.3.7.2.3.1.25,FASTPATH-QOS-DIFFSERV-PRIVATE-MIB::agentDiffServClassRuleStorageType,INTEGER,read-create,,current,other(1):volatile(2):nonVolatile(3):permanent(4):readOnly(5),Storage-type for this conceptual row
.1.3.6.1.4.1.4526.10.3.7.2.3.1.26,FASTPATH-QOS-DIFFSERV-PRIVATE-MIB::agentDiffServClassRuleRowStatus,INTEGER,read-create,,current,active(1):notInService(2):notReady(3):createAndGo(4):createAndWait(5):destroy(6),The status of this conceptual row. All RowStatus operations are permitted. Other columns in this row may be modified when the status is 'active'.
.1.3.6.1.4.1.4526.10.3.7.2.3.1.27,FASTPATH-QOS-DIFFSERV-PRIVATE-MIB::agentDiffServClassRuleMatchCos2,Unsigned32,read-create,,current,,Three-bit user priority field in the second/inner 802.1Q tag header of a  double VLAN tagged Ethernet frame used as a class-match parameter  - only valid if the agentDiffServClassRuleMatchEntryType is set to  cos2(15).
.1.3.6.1.4.1.4526.10.3.7.2.3.1.28,FASTPATH-QOS-DIFFSERV-PRIVATE-MIB::agentDiffServClassRuleMatchEtypeKey,INTEGER,read-create,,current,custom(1):appletalk(2):arp(3):ibmsna(4):ipv4(5):ipv6(6):ipx(7):mplsmcast(8):mplsucast(9):netbios(10):novell(11):pppoe(12):rarp(13),Ethertype keyword match value for the class - only valid if the  agentDiffServClassRuleMatchEntryType is set to etype(16). A keyword of custom(1) requires that the agentDiffServClassRuleMatchEtypeValue object also be set.
.1.3.6.1.4.1.4526.10.3.7.2.3.1.29,FASTPATH-QOS-DIFFSERV-PRIVATE-MIB::agentDiffServClassRuleMatchEtypeValue,Unsigned32,read-create,,current,,Ethertype match value for the class - only valid if the  agentDiffServClassRuleMatchEntryType is set to etype(16) and the agentDiffServClassRuleMatchEtypeKey is set to custom(1). The allowed value for this object is 0x0600 to 0xFFFF.
.1.3.6.1.4.1.4526.10.3.7.2.3.1.30,FASTPATH-QOS-DIFFSERV-PRIVATE-MIB::agentDiffServClassRuleMatchVlanIdStart,Unsigned32,read-create,,current,,VLAN ID range start match value for the class - only valid if the agentDiffServClassRuleMatchEntryType is set to vlanid(17). The VLAN ID field is defined as the 12-bit VLAN identifier in the 802.1Q tag header of a tagged Ethernet frame. This is  contained in the first/outer tag of a double VLAN tagged frame.
.1.3.6.1.4.1.4526.10.3.7.2.3.1.31,FASTPATH-QOS-DIFFSERV-PRIVATE-MIB::agentDiffServClassRuleMatchVlanIdEnd,Unsigned32,read-create,,current,,VLAN ID range end match value for the class - only valid if  the agentDiffServClassRuleMatchEntryType is set to vlanid(17). The VLAN ID field is defined as the 12-bit VLAN identifier in the 802.1Q tag header of a tagged Ethernet frame. This is  contained in the first/outer tag of a double VLAN tagged frame.
.1.3.6.1.4.1.4526.10.3.7.2.3.1.32,FASTPATH-QOS-DIFFSERV-PRIVATE-MIB::agentDiffServClassRuleMatchVlanId2Start,Unsigned32,read-create,,current,,Secondary VLAN ID range start match value for the class - only valid if the  agentDiffServClassRuleMatchEntryType is set to vlanid2(18). The Secondary VLAN ID field is defined as the 12-bit VLAN identifier in the second/inner 802.1Q tag header of a double VLAN tagged Ethernet  frame.
.1.3.6.1.4.1.4526.10.3.7.2.3.1.33,FASTPATH-QOS-DIFFSERV-PRIVATE-MIB::agentDiffServClassRuleMatchVlanId2End,Unsigned32,read-create,,current,,Secondary VLAN ID range end match value for the class - only valid if the  agentDiffServClassRuleMatchEntryType is set to vlanid2(18). The Secondary VLAN ID field is defined as the 12-bit VLAN identifier in the second/inner 802.1Q tag header of a double VLAN tagged Ethernet  frame.
.1.3.6.1.4.1.4526.10.3.7.2.3.1.34,FASTPATH-QOS-DIFFSERV-PRIVATE-MIB::agentDiffServClassRuleMatchFlowLabel,Unsigned32,read-create,,current,,Flow label is 20-bit number that is unique to an IPv6 packet, used by end  stations to signify quality-of-service handling in routers.
.1.3.6.1.4.1.4526.10.3.7.2.3.1.35,FASTPATH-QOS-DIFFSERV-PRIVATE-MIB::agentDiffServClassRuleMatchDstIpv6Prefix,OCTET,read-write,,current,,The Ipv6 Prefix Address configured on the Service Port.
.1.3.6.1.4.1.4526.10.3.7.2.3.1.36,FASTPATH-QOS-DIFFSERV-PRIVATE-MIB::agentDiffServClassRuleMatchSrcIpv6Prefix,OCTET,read-write,,current,,The Ipv6 Prefix Address configured on the Service Port.
.1.3.6.1.4.1.4526.10.3.7.2.3.1.37,FASTPATH-QOS-DIFFSERV-PRIVATE-MIB::agentDiffServClassRuleMatchDstIpv6PrefixLength,Integer32,read-create,,current,,The Prefix Length.
.1.3.6.1.4.1.4526.10.3.7.2.3.1.38,FASTPATH-QOS-DIFFSERV-PRIVATE-MIB::agentDiffServClassRuleMatchSrcIpv6PrefixLength,Integer32,read-create,,current,,The Prefix Length.
.1.3.6.1.4.1.4526.10.3.7.3,FASTPATH-QOS-DIFFSERV-PRIVATE-MIB::agentDiffServPolicyGroup,,,,,,
.1.3.6.1.4.1.4526.10.3.7.3.1,FASTPATH-QOS-DIFFSERV-PRIVATE-MIB::agentDiffServPolicyIndexNextFree,Unsigned32,read-only,,current,,This object contains an unused value for agentDiffServPolicyIndex, or a zero to indicate that none exists.
.1.3.6.1.4.1.4526.10.3.7.3.2,FASTPATH-QOS-DIFFSERV-PRIVATE-MIB::agentDiffServPolicyTable,,not-accessible,,current,,A table of the DiffServ policy entries.
.1.3.6.1.4.1.4526.10.3.7.3.2.1,FASTPATH-QOS-DIFFSERV-PRIVATE-MIB::agentDiffServPolicyEntry,,not-accessible,agentDiffServPolicyIndex,current,,Represents entry for a DiffServ policy.
.1.3.6.1.4.1.4526.10.3.7.3.2.1.1,FASTPATH-QOS-DIFFSERV-PRIVATE-MIB::agentDiffServPolicyIndex,Unsigned32,not-accessible,,current,,The identifier for DiffServ Policy table entry.
.1.3.6.1.4.1.4526.10.3.7.3.2.1.2,FASTPATH-QOS-DIFFSERV-PRIVATE-MIB::agentDiffServPolicyName,OCTET,read-create,,current,,Name of the policy
.1.3.6.1.4.1.4526.10.3.7.3.2.1.3,FASTPATH-QOS-DIFFSERV-PRIVATE-MIB::agentDiffServPolicyType,INTEGER,read-create,,current,in(1):out(2), The policy type dictates whether inbound or outbound policy attribute statements are used in the policy definition.
.1.3.6.1.4.1.4526.10.3.7.3.2.1.4,FASTPATH-QOS-DIFFSERV-PRIVATE-MIB::agentDiffServPolicyInstIndexNextFree,Unsigned32,read-only,,current,,This object contains an unused value for agentDiffServPolicyInstIndex, or  a zero to indicate that none exists. This index is maintained on a  per-policy basis.
.1.3.6.1.4.1.4526.10.3.7.3.2.1.5,FASTPATH-QOS-DIFFSERV-PRIVATE-MIB::agentDiffServPolicyStorageType,INTEGER,read-create,,current,other(1):volatile(2):nonVolatile(3):permanent(4):readOnly(5),Storage-type for this conceptual row
.1.3.6.1.4.1.4526.10.3.7.3.2.1.6,FASTPATH-QOS-DIFFSERV-PRIVATE-MIB::agentDiffServPolicyRowStatus,INTEGER,read-create,,current,active(1):notInService(2):notReady(3):createAndGo(4):createAndWait(5):destroy(6),The status of this conceptual row.  active(1) - this Diffserv Policy is active createAndGo(4) - set to this value to create an instance destroy(6) - set to this value to delete an instance All RowStatus operations are permitted. Other columns in this row may be modified when the status is 'active'. Entries can not be deleted until all rows in agentDiffServPolicyInstTable  with corresponding values of agentDiffServPolicyIndex have been deleted.
.1.3.6.1.4.1.4526.10.3.7.3.3,FASTPATH-QOS-DIFFSERV-PRIVATE-MIB::agentDiffServPolicyInstTable,,not-accessible,,current,,A table of the policy-class instance entries.
.1.3.6.1.4.1.4526.10.3.7.3.3.1,FASTPATH-QOS-DIFFSERV-PRIVATE-MIB::agentDiffServPolicyInstEntry,,not-accessible,agentDiffServPolicyIndex:agentDiffServPolicyInstIndex,current,,Represents entry for a policy-class instance.
.1.3.6.1.4.1.4526.10.3.7.3.3.1.1,FASTPATH-QOS-DIFFSERV-PRIVATE-MIB::agentDiffServPolicyInstIndex,Unsigned32,not-accessible,,current,,The identifier for policy-class Instance table entry within a policy.
.1.3.6.1.4.1.4526.10.3.7.3.3.1.2,FASTPATH-QOS-DIFFSERV-PRIVATE-MIB::agentDiffServPolicyInstClassIndex,Unsigned32,read-create,,current,,Index of the DiffServ Class Table row, whose class definition is used as the policy class instance. The class index identifies the classifier  definition used by the policy to establish an instance of that class  (to which policy attributes can be attached). This is what connects a  class (instance) to a policy.
.1.3.6.1.4.1.4526.10.3.7.3.3.1.3,FASTPATH-QOS-DIFFSERV-PRIVATE-MIB::agentDiffServPolicyInstAttrIndexNextFree,Unsigned32,read-only,,current,,This object contains an unused value for agentDiffServPolicyAttrIndex, or  a zero to indicate that none exists. This index is maintained on a  per-policy-class-instance basis.
.1.3.6.1.4.1.4526.10.3.7.3.3.1.4,FASTPATH-QOS-DIFFSERV-PRIVATE-MIB::agentDiffServPolicyInstStorageType,INTEGER,read-create,,current,other(1):volatile(2):nonVolatile(3):permanent(4):readOnly(5),Storage-type for this conceptual row.
.1.3.6.1.4.1.4526.10.3.7.3.3.1.5,FASTPATH-QOS-DIFFSERV-PRIVATE-MIB::agentDiffServPolicyInstRowStatus,INTEGER,read-create,,current,active(1):notInService(2):notReady(3):createAndGo(4):createAndWait(5):destroy(6),The status of this conceptual row.  active(1) - this Diffserv Policy Instance is active createAndGo(4) - set to this value to create an instance destroy(6) - set to this value to delete an instance All RowStatus operations are permitted. Other columns in this row may be modified when the status is 'active'. Entries can not be deleted until all rows in agentDiffServPolicyAttrTable with  corresponding values of agentDiffServPolicyIndex and agentDiffServPolicyInstIndex have been deleted.
.1.3.6.1.4.1.4526.10.3.7.3.4,FASTPATH-QOS-DIFFSERV-PRIVATE-MIB::agentDiffServPolicyAttrTable,,not-accessible,,current,,A table of policy attribute entries
.1.3.6.1.4.1.4526.10.3.7.3.4.1,FASTPATH-QOS-DIFFSERV-PRIVATE-MIB::agentDiffServPolicyAttrEntry,,not-accessible,agentDiffServPolicyIndex:agentDiffServPolicyInstIndex:agentDiffServPolicyAttrIndex,current,,Represents entry for policy attributes
.1.3.6.1.4.1.4526.10.3.7.3.4.1.1,FASTPATH-QOS-DIFFSERV-PRIVATE-MIB::agentDiffServPolicyAttrIndex,Unsigned32,not-accessible,,current,,The identifier for policy-attribute entry 
.1.3.6.1.4.1.4526.10.3.7.3.4.1.2,FASTPATH-QOS-DIFFSERV-PRIVATE-MIB::agentDiffServPolicyAttrStmtEntryType,INTEGER,read-create,,current,bandwidth(1):expedite(2):markCosVal(3):markIpDscpVal(4):markIpPrecedenceVal(5):policeSimple(6):policeSinglerate(7):policeTworate(8):randomdrop(9):shapeAverage(10):shapePeak(11):assignQueue(12):drop(13):markCos2Val(14):redirect(15):mirror(16):markCosAsSecCos(17),Policy attribute statement entry type -- this entry type is  essential to determine which of the individual object(s)  is defined for this policy attribute statement. This object must be  created before any other policy attribute statement object in the row. The markIpDscpVal(4), markIpPrecedenceVal(5), policeSimple(6),  policeSinglerate(7) and policeTworate(8) values are only allowed for an  agentDiffServPolicyType of in(1). The remaining values are only allowed  for an agentDiffServPolicyType of out(2).
.1.3.6.1.4.1.4526.10.3.7.3.4.1.3,FASTPATH-QOS-DIFFSERV-PRIVATE-MIB::agentDiffServPolicyAttrStmtBandwidthCrate,Unsigned32,read-create,,obsolete,,Bandwidth committed rate attribute statement value -- identifies  the minimum amount of bandwidth to be reserved for the specified  class instance within the policy. This attribute is only valid if  the value of agentDiffServPolicyAttrStmtEntryType is set to bandwidth(1).
.1.3.6.1.4.1.4526.10.3.7.3.4.1.4,FASTPATH-QOS-DIFFSERV-PRIVATE-MIB::agentDiffServPolicyAttrStmtBandwidthCrateUnits,INTEGER,read-create,,obsolete,kbps(1):percentage(2),Bandwidth committed rate units attribute statement value -- this value  determines the interpretation of the  agentDiffServPolicyAttrStmtBandwidthCrate object as either  kilobits-per-second or as a percentage of interface link speed. This  attribute is only valid if the value of  agentDiffServPolicyAttrStmtEntryType is set to bandwidth(1).
.1.3.6.1.4.1.4526.10.3.7.3.4.1.5,FASTPATH-QOS-DIFFSERV-PRIVATE-MIB::agentDiffServPolicyAttrStmtExpediteCrate,Unsigned32,read-create,,obsolete,,Expedited (bandwidth) committed rate attribute statement value -- it  identifies the maximum guaranteed amount of bandwidth to be reserved for  the specified class instance within the policy. This attribute is only  valid if the value of agentDiffServPolicyAttrStmtEntryType is set to  expedite(2). 
.1.3.6.1.4.1.4526.10.3.7.3.4.1.6,FASTPATH-QOS-DIFFSERV-PRIVATE-MIB::agentDiffServPolicyAttrStmtExpediteCrateUnits,INTEGER,read-create,,obsolete,kbps(1):percentage(2),Expedited (bandwidth) committed rate units attribute statement value  -- determines the interpretation of the  agentDiffServPolicyAttrStmtExpediteCrate object as either  kilobits-per-second or as a percentage of interface link speed. This  attribute is only valid if the value of  agentDiffServPolicyAttrStmtEntryType is set to expedite(2).
.1.3.6.1.4.1.4526.10.3.7.3.4.1.7,FASTPATH-QOS-DIFFSERV-PRIVATE-MIB::agentDiffServPolicyAttrStmtExpediteCburst,Unsigned32,read-create,,obsolete,,Expedited (bandwidth) committed burst size attribute statement value,  specified in Kbytes. This attribute is only valid if the value of  agentDiffServPolicyAttrStmtEntryType is set to expedite(2).
.1.3.6.1.4.1.4526.10.3.7.3.4.1.8,FASTPATH-QOS-DIFFSERV-PRIVATE-MIB::agentDiffServPolicyAttrStmtMarkCosVal,Unsigned32,read-create,,current,,Three-bit user priority field value in the 802.1Q tag header of a tagged  Ethernet frame, marked as part of the inbound policy for a class instance.  For frames containing a double VLAN tag, this field is located in the  first/outer tag. This attribute is only valid if the value of  agentDiffServPolicyAttrStmtEntryType is set to markCosVal(3).
.1.3.6.1.4.1.4526.10.3.7.3.4.1.9,FASTPATH-QOS-DIFFSERV-PRIVATE-MIB::agentDiffServPolicyAttrStmtMarkIpDscpVal,Unsigned32,read-create,,current,,Specified IP DSCP value to mark in all inbound packets belonging to the  class-instance. This attribute is only valid if the value of  agentDiffServPolicyAttrStmtEntryType is set to markIpDscpVal(4).
.1.3.6.1.4.1.4526.10.3.7.3.4.1.10,FASTPATH-QOS-DIFFSERV-PRIVATE-MIB::agentDiffServPolicyAttrStmtMarkIpPrecedenceVal,Unsigned32,read-create,,current,,Specified IP Precedence value to mark in all inbound packets belonging to  the class-instance. This attribute is only valid if the value of  agentDiffServPolicyAttrStmtEntryType is set to markIpPrecedenceVal(5).
.1.3.6.1.4.1.4526.10.3.7.3.4.1.11,FASTPATH-QOS-DIFFSERV-PRIVATE-MIB::agentDiffServPolicyAttrStmtPoliceConformAct,INTEGER,read-create,,current,drop(1):markdscp(2):markprec(3):send(4):markcos(5):markcos2(6):markcosAsSecCos(7),Policing conform action attribute statement value -- determines  the action taken on conforming traffic for the policing style (simple,singlerate,tworate) currently configured for the specified  class instance within the policy. The default conform action is send(3). This attribute is only valid if the value of  agentDiffServPolicyAttrStmtEntryType is policeSimple(6),  policeSinglerate(7), or policeTworate(8).
.1.3.6.1.4.1.4526.10.3.7.3.4.1.12,FASTPATH-QOS-DIFFSERV-PRIVATE-MIB::agentDiffServPolicyAttrStmtPoliceConformVal,Unsigned32,read-create,,current,,Policing conform value attribute statement --  used to mark conforming packets when the conform action is one of the following: markdscp(2) - mark IP DSCP field markprec(3) - mark IP Precedence field markcos(5) - mark 802.1p CoS field (first/only tag) markcos2(6) - mark secondary 802.1p CoS field (inner tag) markcosAsSecCos(7) - mark CoS as Secondary CoS value This attribute is only valid if the value of  agentDiffServPolicyAttrStmtEntryType is policeSimple(6),  policeSinglerate(7), or policeTworate(8).
.1.3.6.1.4.1.4526.10.3.7.3.4.1.13,FASTPATH-QOS-DIFFSERV-PRIVATE-MIB::agentDiffServPolicyAttrStmtPoliceExceedAct,INTEGER,read-create,,current,drop(1):markdscp(2):markprec(3):send(4):markcos(5):markcos2(6):markcosAsSecCos(7),Policing exceed action attribute statement value -- determines  the action taken on excess traffic for the policing style (singlerate,  tworate) currently configured for the specified class instance within the  policy. The default exceed action is drop(1). This attribute is only  valid if the value of agentDiffServPolicyAttrStmtEntryType is  policeSinglerate(7) or policeTworate(8).
.1.3.6.1.4.1.4526.10.3.7.3.4.1.14,FASTPATH-QOS-DIFFSERV-PRIVATE-MIB::agentDiffServPolicyAttrStmtPoliceExceedVal,Unsigned32,read-create,,current,,Policing exceed value attribute statement --  used to mark excess packets when the exceed action is one of the following: markdscp(2) - mark IP DSCP field markprec(3) - mark IP Precedence field markcos(5) - mark 802.1p CoS field (first/only tag) markcos2(6) - mark secondary 802.1p CoS field (inner tag) markcosAsSecCos(7) - mark CoS as Secondary CoS value  This is only valid if the value of agentDiffServPolicyAttrStmtEntryType is  policeSinglerate(7) or policeTworate(8).
.1.3.6.1.4.1.4526.10.3.7.3.4.1.15,FASTPATH-QOS-DIFFSERV-PRIVATE-MIB::agentDiffServPolicyAttrStmtPoliceNonconformAct,INTEGER,read-create,,current,drop(1):markdscp(2):markprec(3):send(4):markcos(5):markcos2(6):markcosAsSecCos(7),Policing non-conform action attribute statement value -- determines the  action taken on nonconforming traffic for the policing style (simple,  singlerate,tworate) currently configured for the specified class instance  within the policy. The default non-conform action is drop(1). This  attribute is only valid if the value of  agentDiffServPolicyAttrStmtEntryType is policeSimple(6),  policeSinglerate(7), or policeTworate(8).
.1.3.6.1.4.1.4526.10.3.7.3.4.1.16,FASTPATH-QOS-DIFFSERV-PRIVATE-MIB::agentDiffServPolicyAttrStmtPoliceNonconformVal,Unsigned32,read-create,,current,,Policing non-conform value attribute statement --  used to mark nonconforming packets when the nonconform action is one of the following: markdscp(2) - mark IP DSCP field markprec(3) - mark IP Precedence field markcos(5) - mark 802.1p CoS field (first/only tag) markcos2(6) - mark secondary 802.1p CoS field (inner tag) markcosAsSecCos(7) - mark CoS as Secondary CoS value  This attribute is only valid if the value of  agentDiffServPolicyAttrStmtEntryType is policeSimple(6),  policeSinglerate(7), or policeTworate(8).
.1.3.6.1.4.1.4526.10.3.7.3.4.1.17,FASTPATH-QOS-DIFFSERV-PRIVATE-MIB::agentDiffServPolicyAttrStmtPoliceSimpleCrate,Unsigned32,read-create,,current,,Simple policing committed rate attribute statement value, specified in  kbps. This attribute is only valid if the value of  agentDiffServPolicyAttrStmtEntryType is set to policeSimple(6).
.1.3.6.1.4.1.4526.10.3.7.3.4.1.18,FASTPATH-QOS-DIFFSERV-PRIVATE-MIB::agentDiffServPolicyAttrStmtPoliceSimpleCburst,Unsigned32,read-create,,current,,Simple policing committed burst size attribute statement value, specified  in Kbytes. This attribute is only valid if the value of  agentDiffServPolicyAttrStmtEntryType is set to policeSimple(6).
.1.3.6.1.4.1.4526.10.3.7.3.4.1.19,FASTPATH-QOS-DIFFSERV-PRIVATE-MIB::agentDiffServPolicyAttrStmtPoliceSinglerateCrate,Unsigned32,read-create,,current,,Single-rate policing committed rate attribute statement value, specified  in kbps. This attribute is only valid if the value of  agentDiffServPolicyAttrStmtEntryType is set to policeSinglerate(7).
.1.3.6.1.4.1.4526.10.3.7.3.4.1.20,FASTPATH-QOS-DIFFSERV-PRIVATE-MIB::agentDiffServPolicyAttrStmtPoliceSinglerateCburst,Unsigned32,read-create,,current,,Single-rate policing committed burst size attribute statement value,  specified in Kbytes. This attribute is only valid if the value of  agentDiffServPolicyAttrStmtEntryType is set to policeSinglerate(7).
.1.3.6.1.4.1.4526.10.3.7.3.4.1.21,FASTPATH-QOS-DIFFSERV-PRIVATE-MIB::agentDiffServPolicyAttrStmtPoliceSinglerateEburst,Unsigned32,read-create,,current,,Single-rate policing excess burst size attribute statement value,  specified in Kbytes. This attribute is only valid if the value of  agentDiffServPolicyAttrStmtEntryType is set to policeSinglerate(7).
.1.3.6.1.4.1.4526.10.3.7.3.4.1.22,FASTPATH-QOS-DIFFSERV-PRIVATE-MIB::agentDiffServPolicyAttrStmtPoliceTworateCrate,Unsigned32,read-create,,current,,Two-rate policing committed rate attribute statement value, specified in  kbps. This attribute is only valid if the value of  agentDiffServPolicyAttrStmtEntryType is set to policeTworate(8).
.1.3.6.1.4.1.4526.10.3.7.3.4.1.23,FASTPATH-QOS-DIFFSERV-PRIVATE-MIB::agentDiffServPolicyAttrStmtPoliceTworateCburst,Unsigned32,read-create,,current,,Two-rate policing committed burst size attribute statement value,  specified in Kbytes. This attribute is only valid if the value of  agentDiffServPolicyAttrStmtEntryType is set to policeTworate(8).
.1.3.6.1.4.1.4526.10.3.7.3.4.1.24,FASTPATH-QOS-DIFFSERV-PRIVATE-MIB::agentDiffServPolicyAttrStmtPoliceTworatePrate,Unsigned32,read-create,,current,,Two-rate policing peak rate attribute statement value, specified in kbps. This attribute is only valid if the value of  agentDiffServPolicyAttrStmtEntryType is set to policeTworate(8).
.1.3.6.1.4.1.4526.10.3.7.3.4.1.25,FASTPATH-QOS-DIFFSERV-PRIVATE-MIB::agentDiffServPolicyAttrStmtPoliceTworatePburst,Unsigned32,read-create,,current,,Two-rate policing peak burst size attribute statement value, specified in  Kbytes. This attribute is only valid if the value of  agentDiffServPolicyAttrStmtEntryType is set to policeTworate(8).
.1.3.6.1.4.1.4526.10.3.7.3.4.1.26,FASTPATH-QOS-DIFFSERV-PRIVATE-MIB::agentDiffServPolicyAttrStmtRandomdropMinThresh,Unsigned32,read-create,,obsolete,,Random drop minimum threshold attribute statement value -- the average  queue depth minimum threshold in bytes used by the WRED algorithm. This  attribute is only valid if the value of  agentDiffServPolicyAttrStmtEntryType is set to randomdrop(9).
.1.3.6.1.4.1.4526.10.3.7.3.4.1.27,FASTPATH-QOS-DIFFSERV-PRIVATE-MIB::agentDiffServPolicyAttrStmtRandomdropMaxThresh,Unsigned32,read-create,,obsolete,,Random drop maximum threshold attribute statement value -- the average  queue depth maximum threshold in bytes used by the WRED algorithm. This  attribute is only valid if the value of  agentDiffServPolicyAttrStmtEntryType is set to randomdrop(9).
.1.3.6.1.4.1.4526.10.3.7.3.4.1.28,FASTPATH-QOS-DIFFSERV-PRIVATE-MIB::agentDiffServPolicyAttrStmtRandomdropMaxDropProb,Unsigned32,read-create,,obsolete,,Random drop maximum drop probability attribute statement value -- the  packet drop probability when the queue depth average reaches its maximum  threshold. It is expressed as a percentage, and is an integer from 0 to  100. This attribute is only valid if the value of  agentDiffServPolicyAttrStmtEntryType is set to randomdrop(9).
.1.3.6.1.4.1.4526.10.3.7.3.4.1.29,FASTPATH-QOS-DIFFSERV-PRIVATE-MIB::agentDiffServPolicyAttrStmtRandomdropSamplingRate,Unsigned32,read-create,,obsolete,,Random drop sampling rate attribute statement value -- the period at which  the queue depth is sampled for computing an average, expressed in  microseconds. This value is an integer from 0 to 1000000, with a default  value of 0 (meaning per packet sampling). This attribute is only valid if  the value of agentDiffServPolicyAttrStmtEntryType is set to randomdrop(9).
.1.3.6.1.4.1.4526.10.3.7.3.4.1.30,FASTPATH-QOS-DIFFSERV-PRIVATE-MIB::agentDiffServPolicyAttrStmtRandomdropDecayExponent,Unsigned32,read-create,,obsolete,,Random drop decay exponent attribute statement value -- determines how quickly the average queue length calculation decays over time, with a  higher number causing a slower decay. This value is an integer from 0 to 16, with a default of 9. This attribute is only valid if the value of agentDiffServPolicyAttrStmtEntryType is set to randomdrop(9).
.1.3.6.1.4.1.4526.10.3.7.3.4.1.31,FASTPATH-QOS-DIFFSERV-PRIVATE-MIB::agentDiffServPolicyAttrStmtShapeAverageCrate,Unsigned32,read-create,,obsolete,,Average-rate shaping committed rate attribute statement value, specified  in kbps -- used to establish average rate traffic shaping for the  specified class , which limits transmissions for the class to the  committed information rate, with any excess traffic delayed via queueing.  This attribute is only valid if the value of  agentDiffServPolicyAttrStmtEntryType is set to shapeAverage(10).
.1.3.6.1.4.1.4526.10.3.7.3.4.1.32,FASTPATH-QOS-DIFFSERV-PRIVATE-MIB::agentDiffServPolicyAttrStmtShapePeakCrate,Unsigned32,read-create,,obsolete,,Peak-rate shaping committed rate attribute statement value, specified in  kbps -- used to establish peak rate traffic shaping for the specified  class , which allows transmissions for the class to exceed the committed  information rate by sending excess traffic with the understanding that it  could be dropped by a downstream network element. This attribute is only  valid if the value of agentDiffServPolicyAttrStmtEntryType is set to  shapePeak(11).
.1.3.6.1.4.1.4526.10.3.7.3.4.1.33,FASTPATH-QOS-DIFFSERV-PRIVATE-MIB::agentDiffServPolicyAttrStmtShapePeakPrate,Unsigned32,read-create,,obsolete,,Peak-rate shaping peak rate attribute statement value, specified in kbps -- used to establish peak rate traffic shaping for the specified class,  which allows transmissions for the class to exceed the committed  information rate by sending excess traffic with the understanding that it  could be dropped by a downstream network element. This attribute is only  valid if the value of agentDiffServPolicyAttrStmtEntryType is set to  shapePeak(11).
.1.3.6.1.4.1.4526.10.3.7.3.4.1.34,FASTPATH-QOS-DIFFSERV-PRIVATE-MIB::agentDiffServPolicyAttrStorageType,INTEGER,read-create,,current,other(1):volatile(2):nonVolatile(3):permanent(4):readOnly(5),Storage-type for this conceptual row.
.1.3.6.1.4.1.4526.10.3.7.3.4.1.35,FASTPATH-QOS-DIFFSERV-PRIVATE-MIB::agentDiffServPolicyAttrRowStatus,INTEGER,read-create,,current,active(1):notInService(2):notReady(3):createAndGo(4):createAndWait(5):destroy(6),The status of this conceptual row. active(1) - this Diffserv Policy Attribute is active createAndGo(4) - set to this value to create an instance destroy(6) - set to this value to delete an instance All RowStatus operations are permitted. Other columns in this row may be modified when the status is 'active'.
.1.3.6.1.4.1.4526.10.3.7.3.4.1.36,FASTPATH-QOS-DIFFSERV-PRIVATE-MIB::agentDiffServPolicyAttrStmtAssignQueueId,Unsigned32,read-create,,current,,Queue identifier to which all inbound packets belonging to this  class-instance are directed. This attribute is only valid if the  value of agentDiffServPolicyAttrStmtEntryType is set to assignQueue(12).
.1.3.6.1.4.1.4526.10.3.7.3.4.1.37,FASTPATH-QOS-DIFFSERV-PRIVATE-MIB::agentDiffServPolicyAttrStmtDrop,INTEGER,read-only,,current,true(1):false(2),Flag to indicate that all inbound packets belonging to this  class-instance are dropped at ingress. This attribute is  only valid if the agentDiffServPolicyAttrStmtEntryType is  set to drop(13).
.1.3.6.1.4.1.4526.10.3.7.3.4.1.38,FASTPATH-QOS-DIFFSERV-PRIVATE-MIB::agentDiffServPolicyAttrStmtMarkCos2Val,Unsigned32,read-create,,current,,Three-bit user priority field value in the second/inner 802.1Q tag header of  a double VLAN tagged Ethernet frame, marked as part of the inbound policy for a class instance. This attribute is only valid if the value of  agentDiffServPolicyAttrStmtEntryType is set to markCos2Val(14).
.1.3.6.1.4.1.4526.10.3.7.3.4.1.39,FASTPATH-QOS-DIFFSERV-PRIVATE-MIB::agentDiffServPolicyAttrStmtPoliceColorConformIndex,Unsigned32,read-create,,current,,Index of the DiffServ Class Table row whose class definition is used to specify the policing color conform mode and value. This identifies incoming traffic categorized as 'green' packets in the network. This attribute is only valid if the value of  agentDiffServPolicyAttrStmtEntryType is policeSimple(6),  policeSinglerate(7), or policeTworate(8). The DiffServ class referred to by this object must comply with the following restrictions: 1) Contains only a single, non-excluded match condition identifying one of the following fields: COS, IP DSCP, IP Precedence, or Secondary COS, in accordance with platform support capabilities. This is represented by an agentDiffServClassRuleMatchEntryType value of cos(1), ipdscp(6), ipprecedence(7), or cos2(15), respectively. 2) Must not conflict with any (non-excluded) match conditions in the  classifier used for this policy-class instance, as indicated by the agentDiffServPolicyInstClassIndex object. 3) The color conform mode and value identified by this class index must  not be the same as an existing color-aware exceed mode and value  defined by the agentDiffServPolicyAttrStmtPoliceColorExceedIndex object. A class index value of 0 for this object indicates conform color awareness  is not being used (e.g. color-blind mode). Setting this object to 0 causes the agentDiffServPolicyAttrStmtPoliceColorExceedIndex object to be set to 0 as well.
.1.3.6.1.4.1.4526.10.3.7.3.4.1.40,FASTPATH-QOS-DIFFSERV-PRIVATE-MIB::agentDiffServPolicyAttrStmtPoliceColorConformMode,INTEGER,read-only,,current,blind(1):cos(2):cos2(3):ipdscp(4):ipprec(5),Policing color conform mode -- indicates the color awareness mode of conforming traffic for the policing style (simple,  singlerate, or tworate) currently configured for the specified  class instance within the policy. The default value is blind(1). Any value other than blind(1) denotes the packet field to check for the existing conform color marking, which is compared to the  agentDiffServPolicyAttrStmtPoliceColorConformVal object value. Packets matching this specification are considered to be colored 'green'. This read-only object reflects the DiffServ class definition as indicated by agentDiffServPolicyAttrStmtPoliceColorConformIndex. This attribute is only valid for agentDiffServPolicyAttrStmtEntryType values of  policeSimple(6), policeSinglerate(7), or policeTworate(8).
.1.3.6.1.4.1.4526.10.3.7.3.4.1.41,FASTPATH-QOS-DIFFSERV-PRIVATE-MIB::agentDiffServPolicyAttrStmtPoliceColorConformVal,Unsigned32,read-only,,current,,Policing color conform value -- indicates the color awareness packet mark value of conforming traffic for the policing style  (simple, singlerate, or tworate) currently configured for the  specified class instance within the policy. For the color conform field indicated by  agentDiffServPolicyAttrStmtPoliceColorConformMode, packets containing this value are considered to be colored 'green'. This read-only object reflects the DiffServ class definition as indicated by agentDiffServPolicyAttrStmtPoliceColorConformIndex. This attribute is only valid for agentDiffServPolicyAttrStmtEntryType values of  policeSimple(6), policeSinglerate(7), or policeTworate(8), and  agentDiffServPolicyAttrStmtPoliceColorConformMode values of cos(2), cos2(3), ipdscp(4), or ipprec(5).
.1.3.6.1.4.1.4526.10.3.7.3.4.1.42,FASTPATH-QOS-DIFFSERV-PRIVATE-MIB::agentDiffServPolicyAttrStmtPoliceColorExceedIndex,Unsigned32,read-create,,current,,Index of the DiffServ Class Table row whose class definition is used to specify the policing color exceed mode and value. This identifies incoming traffic categorized as 'yellow' packets in the  network. This attribute is only valid if the value of  agentDiffServPolicyAttrStmtEntryType is policeSinglerate(7) or  policeTworate(8). The DiffServ class referred to by this object must comply with the following restrictions: 1) Contains only a single, non-excluded match condition identifying one of the following fields: COS, IP DSCP, IP Precedence, or Secondary COS, in accordance with platform support capabilities. This is represented by an agentDiffServClassRuleMatchEntryType value of cos(1), ipdscp(6), ipprecedence(7), or cos2(15), respectively. 2) Must not conflict with any (non-excluded) match conditions in the  classifier used for this policy-class instance, as indicated by the agentDiffServPolicyInstClassIndex object. 3) The color exceed mode and value identified by this class index must  not be the same as an existing color-aware exceed mode and value  defined by the agentDiffServPolicyAttrStmtPoliceColorConformIndex object. A class index value of 0 for this object indicates exceed color awareness  is not being used. When the agentDiffServPolicyAttrStmtPoliceColorConformIndex  object is 0, indicating color-blind operation, this object must also be 0. When a non-0 value is used for the agentDiffServPolicyAttrStmtPoliceColorConformIndex object, this object may remain set to 0 if exceed color awareness is not  desired, or may be set to an appropriate class index value to activate exceed color aware mode.
.1.3.6.1.4.1.4526.10.3.7.3.4.1.43,FASTPATH-QOS-DIFFSERV-PRIVATE-MIB::agentDiffServPolicyAttrStmtPoliceColorExceedMode,INTEGER,read-only,,current,blind(1):cos(2):cos2(3):ipdscp(4):ipprec(5):unused(6),Policing color exceed mode -- indicates the color awareness mode of exceeding traffic for the policing style (singlerate or tworate) currently configured for the specified  class instance within the policy. The default value is blind(1). Any value other than blind(1) or unused(6) denotes the packet field to check for the existing exceed color marking, which is compared to the  agentDiffServPolicyAttrStmtPoliceColorExceedVal object value. Packets matching this specification are considered to be colored 'yellow'. Use of exceed color awareness is optional, and this field is set to unused(6) when color conform aware policing is used but the color exceed value is not used. When agentDiffServPolicyAttrStmtPoliceColorConformMode value is blind(1), this object is blind(1) as well. This read-only object reflects the DiffServ class definition as indicated by agentDiffServPolicyAttrStmtPoliceColorExceedIndex. This attribute is only valid for agentDiffServPolicyAttrStmtEntryType values of  policeSinglerate(7) or policeTworate(8).
.1.3.6.1.4.1.4526.10.3.7.3.4.1.44,FASTPATH-QOS-DIFFSERV-PRIVATE-MIB::agentDiffServPolicyAttrStmtPoliceColorExceedVal,Unsigned32,read-only,,current,,Policing color exceed value -- indicates the color awareness packet mark value of exceeding traffic for the policing style  (singlerate or tworate) currently configured for the  specified class instance within the policy. For the color exceed field indicated by  agentDiffServPolicyAttrStmtPoliceColorExceedMode, packets containing this value are considered to be colored 'yellow'. This read-only object reflects the DiffServ class definition as indicated by agentDiffServPolicyAttrStmtPoliceColorExceedIndex. This attribute is only valid for agentDiffServPolicyAttrStmtEntryType values of  policeSinglerate(7) or policeTworate(8), and  agentDiffServPolicyAttrStmtPoliceColorExceedMode values of cos(2), cos2(3), ipdscp(4), or ipprec(5).
.1.3.6.1.4.1.4526.10.3.7.3.4.1.45,FASTPATH-QOS-DIFFSERV-PRIVATE-MIB::agentDiffServPolicyAttrStmtRedirectIntf,Integer32,read-create,,current,,External interface number to which all inbound packets belonging to this  class-instance are redirected. This attribute is only valid if the  value of agentDiffServPolicyAttrStmtEntryType is set to redirect(15).
.1.3.6.1.4.1.4526.10.3.7.3.4.1.46,FASTPATH-QOS-DIFFSERV-PRIVATE-MIB::agentDiffServPolicyAttrStmtMirrorIntf,Integer32,read-create,,current,,External interface number to which all inbound packets belonging to this class-instance are mirrored. This attribute is only valid if the value of agentDiffServPolicyAttrStmtEntryType is set to mirror(16).
.1.3.6.1.4.1.4526.10.3.7.3.4.1.47,FASTPATH-QOS-DIFFSERV-PRIVATE-MIB::agentDiffServPolicyAttrStmtMarkCosAsSecCos,INTEGER,read-only,,current,true(1):false(2),Flag to indicate that all inbound packets belonging to this  class-instance are marked with secondary cos at ingress. This attribute is  only valid if the agentDiffServPolicyAttrStmtEntryType is  set to markCosAsSecCos(17).
.1.3.6.1.4.1.4526.10.3.7.3.5,FASTPATH-QOS-DIFFSERV-PRIVATE-MIB::agentDiffServPolicyPerfInTable,,not-accessible,,current,,A table of inbound policy-class performance entries
.1.3.6.1.4.1.4526.10.3.7.3.5.1,FASTPATH-QOS-DIFFSERV-PRIVATE-MIB::agentDiffServPolicyPerfInEntry,,not-accessible,agentDiffServPolicyIndex:agentDiffServPolicyInstIndex:ifIndex,current,,Represents entry for the performance attributes of the associated inbound  policy-class instance
.1.3.6.1.4.1.4526.10.3.7.3.5.1.1,FASTPATH-QOS-DIFFSERV-PRIVATE-MIB::agentDiffServPolicyPerfInOfferedOctets,Counter32,read-only,,current,,Offered octets count for the inbound policy-class instance performance  entry.
.1.3.6.1.4.1.4526.10.3.7.3.5.1.2,FASTPATH-QOS-DIFFSERV-PRIVATE-MIB::agentDiffServPolicyPerfInOfferedPackets,Counter32,read-only,,current,,Offered packets count for the inbound policy-class instance performance  entry.
.1.3.6.1.4.1.4526.10.3.7.3.5.1.3,FASTPATH-QOS-DIFFSERV-PRIVATE-MIB::agentDiffServPolicyPerfInDiscardedOctets,Counter32,read-only,,current,,Discarded octets count for the inbound policy-class instance performance  entry.
.1.3.6.1.4.1.4526.10.3.7.3.5.1.4,FASTPATH-QOS-DIFFSERV-PRIVATE-MIB::agentDiffServPolicyPerfInDiscardedPackets,Counter32,read-only,,current,,Discarded packets count for the inbound policy-class instance performance  entry.
.1.3.6.1.4.1.4526.10.3.7.3.5.1.5,FASTPATH-QOS-DIFFSERV-PRIVATE-MIB::agentDiffServPolicyPerfInHCOfferedOctets,Counter64,read-only,,current,,Offered octets high capacity count for the inbound policy-class instance  performance entry.
.1.3.6.1.4.1.4526.10.3.7.3.5.1.6,FASTPATH-QOS-DIFFSERV-PRIVATE-MIB::agentDiffServPolicyPerfInHCOfferedPackets,Counter64,read-only,,current,,Offered packets high capacity count for the inbound policy-class instance  performance entry.
.1.3.6.1.4.1.4526.10.3.7.3.5.1.7,FASTPATH-QOS-DIFFSERV-PRIVATE-MIB::agentDiffServPolicyPerfInHCDiscardedOctets,Counter64,read-only,,current,,Discarded octets high capacity count for the inbound policy-class instance  performance entry.
.1.3.6.1.4.1.4526.10.3.7.3.5.1.8,FASTPATH-QOS-DIFFSERV-PRIVATE-MIB::agentDiffServPolicyPerfInHCDiscardedPackets,Counter64,read-only,,current,,Discarded packets high capacity count for the inbound policy-class  instance performance entry.
.1.3.6.1.4.1.4526.10.3.7.3.5.1.9,FASTPATH-QOS-DIFFSERV-PRIVATE-MIB::agentDiffServPolicyPerfInStorageType,INTEGER,read-only,,current,other(1):volatile(2):nonVolatile(3):permanent(4):readOnly(5),Storage-type for this conceptual row.
.1.3.6.1.4.1.4526.10.3.7.3.5.1.10,FASTPATH-QOS-DIFFSERV-PRIVATE-MIB::agentDiffServPolicyPerfInRowStatus,INTEGER,read-only,,current,active(1):notInService(2):notReady(3):createAndGo(4):createAndWait(5):destroy(6),The status of this conceptual row.
.1.3.6.1.4.1.4526.10.3.7.3.6,FASTPATH-QOS-DIFFSERV-PRIVATE-MIB::agentDiffServPolicyPerfOutTable,,not-accessible,,current,,A table of outbound policy-class performance entries
.1.3.6.1.4.1.4526.10.3.7.3.6.1,FASTPATH-QOS-DIFFSERV-PRIVATE-MIB::agentDiffServPolicyPerfOutEntry,,not-accessible,agentDiffServPolicyIndex:agentDiffServPolicyInstIndex:ifIndex,current,,Represents entry for the performance attributes of the associated outbound  policy-class instance
.1.3.6.1.4.1.4526.10.3.7.3.6.1.1,FASTPATH-QOS-DIFFSERV-PRIVATE-MIB::agentDiffServPolicyPerfOutTailDroppedOctets,Counter32,read-only,,obsolete,,Tail-dropped octets count for the outbound policy-class instance  performance entry.
.1.3.6.1.4.1.4526.10.3.7.3.6.1.2,FASTPATH-QOS-DIFFSERV-PRIVATE-MIB::agentDiffServPolicyPerfOutTailDroppedPackets,Counter32,read-only,,obsolete,,Tail-dropped packets count for the outbound policy-class instance  performance entry.
.1.3.6.1.4.1.4526.10.3.7.3.6.1.3,FASTPATH-QOS-DIFFSERV-PRIVATE-MIB::agentDiffServPolicyPerfOutRandomDroppedOctets,Counter32,read-only,,obsolete,,Random-dropped octets count for the outbound policy-class instance  performance entry.
.1.3.6.1.4.1.4526.10.3.7.3.6.1.4,FASTPATH-QOS-DIFFSERV-PRIVATE-MIB::agentDiffServPolicyPerfOutRandomDroppedPackets,Counter32,read-only,,obsolete,,Random-dropped packets count for the outbound policy-class instance  performance entry.
.1.3.6.1.4.1.4526.10.3.7.3.6.1.5,FASTPATH-QOS-DIFFSERV-PRIVATE-MIB::agentDiffServPolicyPerfOutShapeDelayedOctets,Counter32,read-only,,obsolete,,Shape-delayed octets count for the outbound policy-class instance  performance entry.
.1.3.6.1.4.1.4526.10.3.7.3.6.1.6,FASTPATH-QOS-DIFFSERV-PRIVATE-MIB::agentDiffServPolicyPerfOutShapeDelayedPackets,Counter32,read-only,,obsolete,,Shape-delayed packets count for the outbound policy-class instance  performance entry.
.1.3.6.1.4.1.4526.10.3.7.3.6.1.7,FASTPATH-QOS-DIFFSERV-PRIVATE-MIB::agentDiffServPolicyPerfOutSentOctets,Counter32,read-only,,obsolete,,Sent octets count for the outbound policy-class instance performance  entry.
.1.3.6.1.4.1.4526.10.3.7.3.6.1.8,FASTPATH-QOS-DIFFSERV-PRIVATE-MIB::agentDiffServPolicyPerfOutSentPackets,Counter32,read-only,,obsolete,,Sent packets count for the outbound policy-class instance performance  entry.
.1.3.6.1.4.1.4526.10.3.7.3.6.1.9,FASTPATH-QOS-DIFFSERV-PRIVATE-MIB::agentDiffServPolicyPerfOutHCTailDroppedOctets,Counter64,read-only,,obsolete,,Tail-dropped octets high capacity count for the outbound policy-class  instance performance entry.
.1.3.6.1.4.1.4526.10.3.7.3.6.1.10,FASTPATH-QOS-DIFFSERV-PRIVATE-MIB::agentDiffServPolicyPerfOutHCTailDroppedPackets,Counter64,read-only,,obsolete,,Tail-dropped packets high capacity count for the outbound policy-class  instance performance entry.
.1.3.6.1.4.1.4526.10.3.7.3.6.1.11,FASTPATH-QOS-DIFFSERV-PRIVATE-MIB::agentDiffServPolicyPerfOutHCRandomDroppedOctets,Counter64,read-only,,obsolete,,Random-dropped octets high capacity count for the outbound policy-class  instance performance entry.
.1.3.6.1.4.1.4526.10.3.7.3.6.1.12,FASTPATH-QOS-DIFFSERV-PRIVATE-MIB::agentDiffServPolicyPerfOutHCRandomDroppedPackets,Counter64,read-only,,obsolete,,Random-dropped packets high capacity count for the outbound policy-class  instance performance entry.
.1.3.6.1.4.1.4526.10.3.7.3.6.1.13,FASTPATH-QOS-DIFFSERV-PRIVATE-MIB::agentDiffServPolicyPerfOutHCShapeDelayedOctets,Counter64,read-only,,obsolete,,Shape-delayed octets high capacity count for the outbound policy-class  instance performance entry.
.1.3.6.1.4.1.4526.10.3.7.3.6.1.14,FASTPATH-QOS-DIFFSERV-PRIVATE-MIB::agentDiffServPolicyPerfOutHCShapeDelayedPackets,Counter64,read-only,,obsolete,,Shape-delayed packets high capacity count for the outbound policy-class  instance performance entry.
.1.3.6.1.4.1.4526.10.3.7.3.6.1.15,FASTPATH-QOS-DIFFSERV-PRIVATE-MIB::agentDiffServPolicyPerfOutHCSentOctets,Counter64,read-only,,obsolete,,Sent octets high capacity count for the outbound policy-class instance  performance entry.
.1.3.6.1.4.1.4526.10.3.7.3.6.1.16,FASTPATH-QOS-DIFFSERV-PRIVATE-MIB::agentDiffServPolicyPerfOutHCSentPackets,Counter64,read-only,,obsolete,,Sent packets high capacity count for the outbound policy-class instance  performance entry.
.1.3.6.1.4.1.4526.10.3.7.3.6.1.17,FASTPATH-QOS-DIFFSERV-PRIVATE-MIB::agentDiffServPolicyPerfOutStorageType,INTEGER,read-only,,current,other(1):volatile(2):nonVolatile(3):permanent(4):readOnly(5),Storage-type for this conceptual row.
.1.3.6.1.4.1.4526.10.3.7.3.6.1.18,FASTPATH-QOS-DIFFSERV-PRIVATE-MIB::agentDiffServPolicyPerfOutRowStatus,INTEGER,read-only,,current,active(1):notInService(2):notReady(3):createAndGo(4):createAndWait(5):destroy(6),The status of this conceptual row.
.1.3.6.1.4.1.4526.10.3.7.3.6.1.19,FASTPATH-QOS-DIFFSERV-PRIVATE-MIB::agentDiffServPolicyPerfOutOfferedOctets,Counter32,read-only,,current,,Offered octets count for the outbound policy-class instance performance  entry.
.1.3.6.1.4.1.4526.10.3.7.3.6.1.20,FASTPATH-QOS-DIFFSERV-PRIVATE-MIB::agentDiffServPolicyPerfOutOfferedPackets,Counter32,read-only,,current,,Offered packets count for the outbound policy-class instance performance  entry.
.1.3.6.1.4.1.4526.10.3.7.3.6.1.21,FASTPATH-QOS-DIFFSERV-PRIVATE-MIB::agentDiffServPolicyPerfOutDiscardedOctets,Counter32,read-only,,current,,Discarded octets count for the outbound policy-class instance performance  entry.
.1.3.6.1.4.1.4526.10.3.7.3.6.1.22,FASTPATH-QOS-DIFFSERV-PRIVATE-MIB::agentDiffServPolicyPerfOutDiscardedPackets,Counter32,read-only,,current,,Discarded packets count for the outbound policy-class instance performance  entry.
.1.3.6.1.4.1.4526.10.3.7.3.6.1.23,FASTPATH-QOS-DIFFSERV-PRIVATE-MIB::agentDiffServPolicyPerfOutHCOfferedOctets,Counter64,read-only,,current,,Offered octets high capacity count for the outbound policy-class instance  performance entry.
.1.3.6.1.4.1.4526.10.3.7.3.6.1.24,FASTPATH-QOS-DIFFSERV-PRIVATE-MIB::agentDiffServPolicyPerfOutHCOfferedPackets,Counter64,read-only,,current,,Offered packets high capacity count for the outbound policy-class instance  performance entry.
.1.3.6.1.4.1.4526.10.3.7.3.6.1.25,FASTPATH-QOS-DIFFSERV-PRIVATE-MIB::agentDiffServPolicyPerfOutHCDiscardedOctets,Counter64,read-only,,current,,Discarded octets high capacity count for the outbound policy-class instance  performance entry.
.1.3.6.1.4.1.4526.10.3.7.3.6.1.26,FASTPATH-QOS-DIFFSERV-PRIVATE-MIB::agentDiffServPolicyPerfOutHCDiscardedPackets,Counter64,read-only,,current,,Discarded packets high capacity count for the outbound policy-class  instance performance entry.
.1.3.6.1.4.1.4526.10.3.7.4,FASTPATH-QOS-DIFFSERV-PRIVATE-MIB::agentDiffServServiceGroup,,,,,,
.1.3.6.1.4.1.4526.10.3.7.4.1,FASTPATH-QOS-DIFFSERV-PRIVATE-MIB::agentDiffServServiceTable,,not-accessible,,current,,A table of the service entries.
.1.3.6.1.4.1.4526.10.3.7.4.1.1,FASTPATH-QOS-DIFFSERV-PRIVATE-MIB::agentDiffServServiceEntry,,not-accessible,agentDiffServServiceIfIndex:agentDiffServServiceIfDirection,current,,Represents entry for policy assigned to an interface in a particular  direction.
.1.3.6.1.4.1.4526.10.3.7.4.1.1.1,FASTPATH-QOS-DIFFSERV-PRIVATE-MIB::agentDiffServServiceIfIndex,Integer32,not-accessible,,current,,External interface number of the interface to which policy is assigned.
.1.3.6.1.4.1.4526.10.3.7.4.1.1.2,FASTPATH-QOS-DIFFSERV-PRIVATE-MIB::agentDiffServServiceIfDirection,INTEGER,not-accessible,,current,in(1):out(2),Interface direction to which the policy is assigned.
.1.3.6.1.4.1.4526.10.3.7.4.1.1.3,FASTPATH-QOS-DIFFSERV-PRIVATE-MIB::agentDiffServServicePolicyIndex,Unsigned32,read-create,,current,,Index of the Policy Table row whose policy definition is attached to the  interface in the specified direction.
.1.3.6.1.4.1.4526.10.3.7.4.1.1.4,FASTPATH-QOS-DIFFSERV-PRIVATE-MIB::agentDiffServServiceIfOperStatus,INTEGER,read-only,,current,up(1):down(2),The current operational state of the DiffServ service  interface. If agentDiffServGenStatusAdminMode is  disable(2) then agentDiffServServiceIfOperStatus should  be down(2). If agentDiffServServiceGenStatusAdminMode  is changed to enable(1) then agentDiffServServiceIfOperStatus should change to up(1) if the service interface is ready  to send and receive DiffServ traffic; it should remain in the down(2) state if the underlying interface hardware is not in a link up condition, if the policy definition  represented by agentDiffServServicePolicyIndex is incompatible with the interface (e.g., requires more bandwidth than the current capacity of the interface), or if the policy definition is considered to be incomplete (e.g., one or more composite rows is not in the active(1) state).
.1.3.6.1.4.1.4526.10.3.7.4.1.1.5,FASTPATH-QOS-DIFFSERV-PRIVATE-MIB::agentDiffServServiceStorageType,INTEGER,read-create,,current,other(1):volatile(2):nonVolatile(3):permanent(4):readOnly(5),Storage-type for this conceptual row
.1.3.6.1.4.1.4526.10.3.7.4.1.1.6,FASTPATH-QOS-DIFFSERV-PRIVATE-MIB::agentDiffServServiceRowStatus,INTEGER,read-create,,current,active(1):notInService(2):notReady(3):createAndGo(4):createAndWait(5):destroy(6),The status of this conceptual row. active(1) - Diffserv is active createAndGo(4) - set to this value to create an instance destroy(6) - set to this value to delete an instance All RowStatus operations are permitted. Other columns in this row may be modified when the status is 'active'.
.1.3.6.1.4.1.4526.10.3.7.4.2,FASTPATH-QOS-DIFFSERV-PRIVATE-MIB::agentDiffServServicePerfTable,,not-accessible,,current,,A table of service performance entries.
.1.3.6.1.4.1.4526.10.3.7.4.2.1,FASTPATH-QOS-DIFFSERV-PRIVATE-MIB::agentDiffServServicePerfEntry,,not-accessible,,current,,Represents a service performance entry.
.1.3.6.1.4.1.4526.10.3.7.4.2.1.1,FASTPATH-QOS-DIFFSERV-PRIVATE-MIB::agentDiffServServicePerfOfferedOctets,Counter32,read-only,,current,,Offered octets count for the specified service interface and direction
.1.3.6.1.4.1.4526.10.3.7.4.2.1.2,FASTPATH-QOS-DIFFSERV-PRIVATE-MIB::agentDiffServServicePerfOfferedPackets,Counter32,read-only,,current,,Offered packets count for specified service interface and direction
.1.3.6.1.4.1.4526.10.3.7.4.2.1.3,FASTPATH-QOS-DIFFSERV-PRIVATE-MIB::agentDiffServServicePerfDiscardedOctets,Counter32,read-only,,current,,Discarded octets count for the specified service interface and direction
.1.3.6.1.4.1.4526.10.3.7.4.2.1.4,FASTPATH-QOS-DIFFSERV-PRIVATE-MIB::agentDiffServServicePerfDiscardedPackets,Counter32,read-only,,current,,Discarded packets count for the specified service interface and direction
.1.3.6.1.4.1.4526.10.3.7.4.2.1.5,FASTPATH-QOS-DIFFSERV-PRIVATE-MIB::agentDiffServServicePerfSentOctets,Counter32,read-only,,current,,Sent octets count for the specified service interface and direction
.1.3.6.1.4.1.4526.10.3.7.4.2.1.6,FASTPATH-QOS-DIFFSERV-PRIVATE-MIB::agentDiffServServicePerfSentPackets,Counter32,read-only,,current,,Sent packets count for the specified service interface and direction
.1.3.6.1.4.1.4526.10.3.7.4.2.1.7,FASTPATH-QOS-DIFFSERV-PRIVATE-MIB::agentDiffServServicePerfHCOfferedOctets,Counter64,read-only,,current,,Offered octets high capacity count for the specified service interface  and direction
.1.3.6.1.4.1.4526.10.3.7.4.2.1.8,FASTPATH-QOS-DIFFSERV-PRIVATE-MIB::agentDiffServServicePerfHCOfferedPackets,Counter64,read-only,,current,,Offered packets high capacity count for the specified service interface  and direction
.1.3.6.1.4.1.4526.10.3.7.4.2.1.9,FASTPATH-QOS-DIFFSERV-PRIVATE-MIB::agentDiffServServicePerfHCDiscardedOctets,Counter64,read-only,,current,,Discarded octets high capacity count for the specified service interface  and direction
.1.3.6.1.4.1.4526.10.3.7.4.2.1.10,FASTPATH-QOS-DIFFSERV-PRIVATE-MIB::agentDiffServServicePerfHCDiscardedPackets,Counter64,read-only,,current,,Discarded packets high capacity count for the specified service interface  and direction
.1.3.6.1.4.1.4526.10.3.7.4.2.1.11,FASTPATH-QOS-DIFFSERV-PRIVATE-MIB::agentDiffServServicePerfHCSentOctets,Counter64,read-only,,current,,Sent octets high capacity count for the specified service interface and  direction
.1.3.6.1.4.1.4526.10.3.7.4.2.1.12,FASTPATH-QOS-DIFFSERV-PRIVATE-MIB::agentDiffServServicePerfHCSentPackets,Counter64,read-only,,current,,Sent packets high capacity count for the specified service interface and  direction
.1.3.6.1.4.1.4526.10.4,FASTPATH-MULTICAST-MIB::fastPathMulticast,,,,,,The MIB definitions for Multicast Routing Flex package.
.1.3.6.1.4.1.4526.10.4.1,FASTPATH-MULTICAST-MIB::agentMulticastIGMPConfigGroup,,,,,,
.1.3.6.1.4.1.4526.10.4.1.1,FASTPATH-MULTICAST-MIB::agentMulticastIGMPAdminMode,INTEGER,read-write,,current,enable(1):disable(2),This enables or disables IGMP on the system.
.1.3.6.1.4.1.4526.10.4.1.2,FASTPATH-MULTICAST-MIB::agentMulticastIGMPInterfaceTable,,not-accessible,,obsolete,,Provides Per-Interface configuration of IGMP.
.1.3.6.1.4.1.4526.10.4.1.2.1,FASTPATH-MULTICAST-MIB::agentMulticastIGMPInterfaceEntry,,not-accessible,agentMulticastIGMPInterfaceIfIndex,obsolete,,Information about a table entry.
.1.3.6.1.4.1.4526.10.4.1.2.1.1,FASTPATH-MULTICAST-MIB::agentMulticastIGMPInterfaceIfIndex,Integer32,read-only,,obsolete,,Identifies the external interface number.
.1.3.6.1.4.1.4526.10.4.1.2.1.2,FASTPATH-MULTICAST-MIB::agentMulticastIGMPInterfaceAdminMode,INTEGER,read-write,,obsolete,enable(1):disable(2),This enables or disables IGMP on this interface.
.1.3.6.1.4.1.4526.10.4.2,FASTPATH-MULTICAST-MIB::agentMulticastPIMConfigGroup,,,,,,
.1.3.6.1.4.1.4526.10.4.2.1,FASTPATH-MULTICAST-MIB::agentMulticastPIMConfigMode,INTEGER,read-write,,obsolete,sparse(1):dense(2),This controls which PIM mode configuration the PIM-MIB displays.
.1.3.6.1.4.1.4526.10.4.3,FASTPATH-MULTICAST-MIB::agentMulticastPIMSMConfigGroup,,,,,,
.1.3.6.1.4.1.4526.10.4.3.1,FASTPATH-MULTICAST-MIB::agentMulticastPIMSMAdminMode,INTEGER,read-write,,current,enable(1):disable(2),This enables or disables PIM Sparse Mode on the system.
.1.3.6.1.4.1.4526.10.4.3.2,FASTPATH-MULTICAST-MIB::agentMulticastPIMSMDataThresholdRate,Integer32,read-write,,current,,Specifies the minimum rate in Kbits/sec for the last hop router to initiate switching to the shortest path.
.1.3.6.1.4.1.4526.10.4.3.3,FASTPATH-MULTICAST-MIB::agentMulticastPIMSMRegThresholdRate,Integer32,read-write,,current,,Specifies the minimum rate in Kbits/sec for the RP to switch to the shortest path.
.1.3.6.1.4.1.4526.10.4.3.4,FASTPATH-MULTICAST-MIB::agentMulticastPIMSMStaticRPTable,,not-accessible,,obsolete,,Provides Per-Interface configuration of PIM-SM.
.1.3.6.1.4.1.4526.10.4.3.4.1,FASTPATH-MULTICAST-MIB::agentMulticastPIMSMStaticRPEntry,,not-accessible,agentMulticastPIMSMStaticRPIpAddr:agentMulticastPIMSMStaticRPGroupIpAddr:agentMulticastPIMSMStaticRPGroupIpMask,obsolete,,Information about a table entry.
.1.3.6.1.4.1.4526.10.4.3.4.1.1,FASTPATH-MULTICAST-MIB::agentMulticastPIMSMStaticRPIpAddr,IpAddress,not-accessible,,obsolete,,IP Address of the RP.
.1.3.6.1.4.1.4526.10.4.3.4.1.2,FASTPATH-MULTICAST-MIB::agentMulticastPIMSMStaticRPGroupIpAddr,IpAddress,not-accessible,,obsolete,,Group IP Address supported by the RP.
.1.3.6.1.4.1.4526.10.4.3.4.1.3,FASTPATH-MULTICAST-MIB::agentMulticastPIMSMStaticRPGroupIpMask,IpAddress,not-accessible,,obsolete,,Group mask for the group IP Address.
.1.3.6.1.4.1.4526.10.4.3.4.1.4,FASTPATH-MULTICAST-MIB::agentMulticastPIMSMStaticRPStatus,INTEGER,read-create,,obsolete,active(1):notInService(2):notReady(3):createAndGo(4):createAndWait(5):destroy(6),Status of this entry in the Static RP Table.  Allowed values are:  active(1) - This entry is active destroy(6) - Setting an entry to this value removes the  entry from the table.
.1.3.6.1.4.1.4526.10.4.3.5,FASTPATH-MULTICAST-MIB::agentMulticastPIMSMInterfaceTable,,not-accessible,,obsolete,,Provides Per-Interface configuration of PIM-SM.
.1.3.6.1.4.1.4526.10.4.3.5.1,FASTPATH-MULTICAST-MIB::agentMulticastPIMSMInterfaceEntry,,not-accessible,agentMulticastPIMSMInterfaceIndex,obsolete,,Allows configuration of parameters not provided in the  standard PIM-MIB.
.1.3.6.1.4.1.4526.10.4.3.5.1.1,FASTPATH-MULTICAST-MIB::agentMulticastPIMSMInterfaceIndex,Unsigned32,not-accessible,,obsolete,,Routing Interface associated with this PIM SM configuration entry.
.1.3.6.1.4.1.4526.10.4.3.5.1.2,FASTPATH-MULTICAST-MIB::agentMulticastPIMSMInterfaceCBSRHashMaskLength,Unsigned32,read-write,,obsolete,,The BSR hash mask length to be advertised in bootstrap messages if  this interface is elected as the bootstrap router. This hash mask  length will be used in the hash algorith for selecting the RP for  a particular group.
.1.3.6.1.4.1.4526.10.4.3.5.1.3,FASTPATH-MULTICAST-MIB::agentMulticastPIMSMInterfaceCRPPreference,Integer32,read-write,,obsolete,,The preference value for the local interface as a Candidate  Rendezvous Point. The value of -1 is used to indicate that the local  interface is not a Candidate RP interface.
.1.3.6.1.4.1.4526.10.4.4,FASTPATH-MULTICAST-MIB::agentMulticastPIMDMConfigGroup,,,,,,
.1.3.6.1.4.1.4526.10.4.4.1,FASTPATH-MULTICAST-MIB::agentMulticastPIMDMAdminMode,INTEGER,read-write,,current,enable(1):disable(2),This enables or disables PIM Dense Mode on the system.
.1.3.6.1.4.1.4526.10.4.5,FASTPATH-MULTICAST-MIB::agentMulticastRoutingConfigGroup,,,,,,
.1.3.6.1.4.1.4526.10.4.5.1,FASTPATH-MULTICAST-MIB::agentMulticastRoutingAdminMode,INTEGER,read-write,,current,enable(1):disable(2),This enables or disables Multicast Routing Mode on the system.
.1.3.6.1.4.1.4526.10.4.6,FASTPATH-MULTICAST-MIB::agentMulticastDVMRPConfigGroup,,,,,,
.1.3.6.1.4.1.4526.10.4.6.1,FASTPATH-MULTICAST-MIB::agentMulticastDVMRPAdminMode,INTEGER,read-write,,current,enable(1):disable(2),This enables or disables DVMRP on the system.
.1.3.6.1.4.1.4526.10.4.7,FASTPATH-MULTICAST-MIB::agentSnmpTrapFlagsConfigGroupMulticast,,,,,,
.1.3.6.1.4.1.4526.10.4.7.1,FASTPATH-MULTICAST-MIB::agentSnmpDVMRPTrapFlag,INTEGER,read-write,,current,enable(1):disable(2),This enables or disables DVMRP Traps on the system.
.1.3.6.1.4.1.4526.10.4.7.2,FASTPATH-MULTICAST-MIB::agentSnmpPIMTrapFlag,INTEGER,read-write,,current,enable(1):disable(2),This enables or disables PIM Traps on the system.
.1.3.6.1.4.1.4526.10.4.8,FASTPATH-MULTICAST-MIB::agentIpStaticMRouteTable,,not-accessible,,current,,The table listing the Static Multicast Route Entries.
.1.3.6.1.4.1.4526.10.4.8.1,FASTPATH-MULTICAST-MIB::agentIpStaticMRouteEntry,,not-accessible,agentIpStaticMRouteSrcAddressType:agentIpStaticMRouteSrcIpAddr,current,,Information about a table entry.
.1.3.6.1.4.1.4526.10.4.8.1.1,FASTPATH-MULTICAST-MIB::agentIpStaticMRouteSrcAddressType,INTEGER,not-accessible,,current,unknown(0):ipv4(1):ipv6(2):ipv4z(3):ipv6z(4):dns(16),The address type of this Multicast data source.
.1.3.6.1.4.1.4526.10.4.8.1.2,FASTPATH-MULTICAST-MIB::agentIpStaticMRouteSrcIpAddr,OCTET,not-accessible,,current,,The address of the Multicast data source.
.1.3.6.1.4.1.4526.10.4.8.1.3,FASTPATH-MULTICAST-MIB::agentIpStaticMRouteSrcNetMask,OCTET,read-create,,current,,The network mask for the IP address of the Multicast data source.
.1.3.6.1.4.1.4526.10.4.8.1.4,FASTPATH-MULTICAST-MIB::agentIpStaticMRouteRpfIpAddr,OCTET,read-create,,current,,The RPF Address.
.1.3.6.1.4.1.4526.10.4.8.1.5,FASTPATH-MULTICAST-MIB::agentIpStaticMRouteIfIndex,Integer32,read-create,,current,,The interface index if RPF address is link-local.
.1.3.6.1.4.1.4526.10.4.8.1.6,FASTPATH-MULTICAST-MIB::agentIpStaticMRoutePreference,Integer32,read-create,,current,,The preference of this route entry.
.1.3.6.1.4.1.4526.10.4.8.1.7,FASTPATH-MULTICAST-MIB::agentIpStaticMRouteStatus,INTEGER,read-create,,current,active(1):notInService(2):notReady(3):createAndGo(4):createAndWait(5):destroy(6),The preference of this route entry.
.1.3.6.1.4.1.4526.10.11,FASTPATH-MGMT-SECURITY-MIB::fastPathMgmtSecurity,,,,,,The NETGEAR Private MIB for FastPath Security
.1.3.6.1.4.1.4526.10.11.1,FASTPATH-MGMT-SECURITY-MIB::agentSSLConfigGroup,,,,,,
.1.3.6.1.4.1.4526.10.11.1.1,FASTPATH-MGMT-SECURITY-MIB::agentSSLAdminMode,INTEGER,read-write,,current,enable(1):disable(2),Configures whether the SSL service is enabled on this switch. The default value is disable(2).
.1.3.6.1.4.1.4526.10.11.1.2,FASTPATH-MGMT-SECURITY-MIB::agentSSLSecurePort,Integer32,read-write,,current,,Configures the port the SSL service will respond on. The default value is 443.
.1.3.6.1.4.1.4526.10.11.1.3,FASTPATH-MGMT-SECURITY-MIB::agentSSLProtocolLevel,INTEGER,read-write,,current,ssl30(1):tls10(2):both(3),Configures which protocol versions of SSL are enabled on this switch. The default value is both(3).
.1.3.6.1.4.1.4526.10.11.1.4,FASTPATH-MGMT-SECURITY-MIB::agentSSLMaxSessions,Integer32,read-write,,current,,Configures the maximum number of allowable SSL sessions. The default value is 16.
.1.3.6.1.4.1.4526.10.11.1.5,FASTPATH-MGMT-SECURITY-MIB::agentSSLHardTimeout,Integer32,read-write,,current,,Configures the hard timeout for SSL sessions in hours. The default value is 24 hours.
.1.3.6.1.4.1.4526.10.11.1.6,FASTPATH-MGMT-SECURITY-MIB::agentSSLSoftTimeout,Integer32,read-write,,current,,Configures the soft (activity) timeout for SSL sessions in minutes. The default value is 5 minutes.
.1.3.6.1.4.1.4526.10.11.1.7,FASTPATH-MGMT-SECURITY-MIB::agentSSLCertificatePresent,INTEGER,read-only,,current,true(1):false(2),Boolean value indicating whether SSL certificate files exist on the device.
.1.3.6.1.4.1.4526.10.11.1.8,FASTPATH-MGMT-SECURITY-MIB::agentSSLCertificateControl,INTEGER,read-write,,current,noop(1):generate(2):delete(3),Controls certificate generation and deletion. Always returns noop(1).
.1.3.6.1.4.1.4526.10.11.1.9,FASTPATH-MGMT-SECURITY-MIB::agentSSLCertificateGenerationStatus,INTEGER,read-only,,current,true(1):false(2),Indicates whether certificate files are currently being generated.
.1.3.6.1.4.1.4526.10.11.2,FASTPATH-MGMT-SECURITY-MIB::agentSSHConfigGroup,,,,,,
.1.3.6.1.4.1.4526.10.11.2.1,FASTPATH-MGMT-SECURITY-MIB::agentSSHAdminMode,INTEGER,read-write,,current,enable(1):disable(2),Configures whether the SSH service is enabled on this switch. The default value is disable(2).
.1.3.6.1.4.1.4526.10.11.2.2,FASTPATH-MGMT-SECURITY-MIB::agentSSHProtocolLevel,INTEGER,read-write,,current,ssh10(1):ssh20(2):both(3),Configures which protocol versions of SSH are enabled on this switch. The default value is both(3).
.1.3.6.1.4.1.4526.10.11.2.3,FASTPATH-MGMT-SECURITY-MIB::agentSSHSessionsCount,Integer32,read-only,,current,,Current number of active SSH sessions on this switch.
.1.3.6.1.4.1.4526.10.11.2.4,FASTPATH-MGMT-SECURITY-MIB::agentSSHMaxSessionsCount,Integer32,read-write,,current,,Max number of SSH sessions permitted on this switch.
.1.3.6.1.4.1.4526.10.11.2.5,FASTPATH-MGMT-SECURITY-MIB::agentSSHSessionTimeout,Integer32,read-write,,current,,ssh idle timeout value for this switch im minutes.
.1.3.6.1.4.1.4526.10.11.2.6,FASTPATH-MGMT-SECURITY-MIB::agentSSHKeysPresent,INTEGER,read-only,,current,dsa(1):rsa(2):both(3):none(4),Indicates what key files are present on the device, if any.
.1.3.6.1.4.1.4526.10.11.2.7,FASTPATH-MGMT-SECURITY-MIB::agentSSHKeyGenerationStatus,INTEGER,read-only,,current,dsa(1):rsa(2):both(3):none(4),Indicates what key files are currently being generated, if any.
.1.3.6.1.4.1.4526.10.11.2.8,FASTPATH-MGMT-SECURITY-MIB::agentSSHRSAKeyControl,INTEGER,read-write,,current,noop(1):generate(2):delete(3),Controls RSA key generation and deletion. Always returns noop(1).
.1.3.6.1.4.1.4526.10.11.2.9,FASTPATH-MGMT-SECURITY-MIB::agentSSHDSAKeyControl,INTEGER,read-write,,current,noop(1):generate(2):delete(3),Controls DSA key generation and deletion. Always returns noop(1).
.1.3.6.1.4.1.4526.10.12,FASTPATH-DHCPSERVER-PRIVATE-MIB::fastPathDHCPServerPrivate,,,,,,The NETGEAR Private MIB for FASTPATH DHCP Server
.1.3.6.1.4.1.4526.10.12.1,FASTPATH-DHCPSERVER-PRIVATE-MIB::agentDhcpServerGroup,,,,,,
.1.3.6.1.4.1.4526.10.12.1.1,FASTPATH-DHCPSERVER-PRIVATE-MIB::agentDhcpServerAdminMode,INTEGER,read-write,,current,enable(1):disable(2), Admin-mode of the DHCP Server.
.1.3.6.1.4.1.4526.10.12.1.2,FASTPATH-DHCPSERVER-PRIVATE-MIB::agentDhcpServerPingPktNos,INTEGER,read-write,,current,, The no. of packets a DHCP Server sends to a pool address as part of a ping operation.Setting the value of ping-packets to zero turns off DHCP Server ping operation .
.1.3.6.1.4.1.4526.10.12.1.3,FASTPATH-DHCPSERVER-PRIVATE-MIB::agentDhcpServerAutomaticBindingsNos,Counter32,read-only,,current,, The no. of IP addresses that have been assigned automatically.
.1.3.6.1.4.1.4526.10.12.1.4,FASTPATH-DHCPSERVER-PRIVATE-MIB::agentDhcpServerExpiredBindingsNos,Counter32,read-only,,current,, The no. of expired leases.
.1.3.6.1.4.1.4526.10.12.1.5,FASTPATH-DHCPSERVER-PRIVATE-MIB::agentDhcpServerMalformedMessagesReceived,Counter32,read-only,,current,, The no. of malformed(truncated or corrupt) messages that have been received by the DHCP server.
.1.3.6.1.4.1.4526.10.12.1.6,FASTPATH-DHCPSERVER-PRIVATE-MIB::agentDhcpServerDISCOVERMessagesReceived,Counter32,read-only,,current,, The no. of DHCP messages of type DHCPDISCOVER that have been received by the DHCP server.
.1.3.6.1.4.1.4526.10.12.1.7,FASTPATH-DHCPSERVER-PRIVATE-MIB::agentDhcpServerREQUESTMessagesReceived,Counter32,read-only,,current,, The no. of DHCP messages of type DHCPREQUEST that have been received by the DHCP server.
.1.3.6.1.4.1.4526.10.12.1.8,FASTPATH-DHCPSERVER-PRIVATE-MIB::agentDhcpServerDECLINEMessagesReceived,Counter32,read-only,,current,, The no. of DHCP messages of type DHCPDECLINE that have been received by the DHCP server.
.1.3.6.1.4.1.4526.10.12.1.9,FASTPATH-DHCPSERVER-PRIVATE-MIB::agentDhcpServerRELEASEMessagesReceived,Counter32,read-only,,current,, The no. of DHCP messages of type DHCPRELEASE that have been received by the DHCP server.
.1.3.6.1.4.1.4526.10.12.1.10,FASTPATH-DHCPSERVER-PRIVATE-MIB::agentDhcpServerINFORMMessagesReceived,Counter32,read-only,,current,, The no. of DHCP messages of type DHCPINFORM that have been received by the DHCP server.
.1.3.6.1.4.1.4526.10.12.1.11,FASTPATH-DHCPSERVER-PRIVATE-MIB::agentDhcpServerOFFERMessagesSent,Counter32,read-only,,current,, The no. of DHCP messages of type DHCPOFFER that have been sent by the DHCP server.
.1.3.6.1.4.1.4526.10.12.1.12,FASTPATH-DHCPSERVER-PRIVATE-MIB::agentDhcpServerACKMessagesSent,Counter32,read-only,,current,, The no. of DHCP messages of type DHCPACK that have been sent by the DHCP server.
.1.3.6.1.4.1.4526.10.12.1.13,FASTPATH-DHCPSERVER-PRIVATE-MIB::agentDhcpServerNAKMessagesSent,Counter32,read-only,,current,, The no. of DHCP messages of type DHCPNAK that have been sent by the DHCP server.
.1.3.6.1.4.1.4526.10.12.1.14,FASTPATH-DHCPSERVER-PRIVATE-MIB::agentDhcpServerClearStatistics,INTEGER,read-write,,current,enable(1):disable(2), Clears the DHCP server statistics.
.1.3.6.1.4.1.4526.10.12.1.15,FASTPATH-DHCPSERVER-PRIVATE-MIB::agentDhcpServerBootpAutomatic,INTEGER,read-write,,current,enable(1):disable(2),Used to enable or disable autmatic address allocation to bootp clients from dynamic address pools.
.1.3.6.1.4.1.4526.10.12.2,FASTPATH-DHCPSERVER-PRIVATE-MIB::agentDhcpServerPoolConfigGroup,,,,,,
.1.3.6.1.4.1.4526.10.12.2.1,FASTPATH-DHCPSERVER-PRIVATE-MIB::agentDhcpServerPoolNameCreate,OCTET,read-write,,current,,A pool is created by applying write operation on this MIB object and providing a new pool-name. Get operation on this MIB object returns a null-value, as for the purpose of viewing the pool name, the user should perform the traversal of agentDhcpServerPoolConfigTable. For this reason the get operation on object agentDhcpServerPoolNameCreate becomes insignificant.
.1.3.6.1.4.1.4526.10.12.2.2,FASTPATH-DHCPSERVER-PRIVATE-MIB::agentDhcpServerPoolConfigTable,,not-accessible,,current,,A table of the DHCP Server Pool configuration entries.
.1.3.6.1.4.1.4526.10.12.2.2.1,FASTPATH-DHCPSERVER-PRIVATE-MIB::agentDhcpServerPoolConfigEntry,,not-accessible,agentDhcpServerPoolIndex,current,,Represents entry for a Dhcp server pool.
.1.3.6.1.4.1.4526.10.12.2.2.1.1,FASTPATH-DHCPSERVER-PRIVATE-MIB::agentDhcpServerPoolIndex,Unsigned32,read-only,,current,,The Pool Index, which 'll be used as index for the PoolConfig Table.
.1.3.6.1.4.1.4526.10.12.2.2.1.2,FASTPATH-DHCPSERVER-PRIVATE-MIB::agentDhcpServerPoolName,OCTET,read-only,,current,,The name of the DHCP Address pool. This value cannot be modified
.1.3.6.1.4.1.4526.10.12.2.2.1.3,FASTPATH-DHCPSERVER-PRIVATE-MIB::agentDhcpServerPoolDefRouter,OCTET,read-write,,current,,This specifies the default-router list(each default-router is separated by comma and the list is terminated by semi-colon) for a DHCP client, an example would be 10.10.1.1,192.168.36.1,157.227.44.1;(no spaces in between).User should enter a 'null' or 'NULL' string to remove current default-router list.
.1.3.6.1.4.1.4526.10.12.2.2.1.4,FASTPATH-DHCPSERVER-PRIVATE-MIB::agentDhcpServerPoolDNSServer,OCTET,read-write,,current,,This specifies the DNS IP servers(each DNS IP server is separated by comma and the list is terminated by semi-colon) for a DHCP client, an example would be 10.10.1.1,192.168.36.1,157.227.44.1;(no spaces in between).User should enter a 'null' or 'NULL' string to remove current default-router list.
.1.3.6.1.4.1.4526.10.12.2.2.1.5,FASTPATH-DHCPSERVER-PRIVATE-MIB::agentDhcpServerPoolLeaseTime,Integer32,read-write,,current,,This specifies the duration of the lease(in minutes) for an IP address that is assigened from a DHCP server to a DHCP client. For infinite leases, lease-time value will be set to 86400.
.1.3.6.1.4.1.4526.10.12.2.2.1.6,FASTPATH-DHCPSERVER-PRIVATE-MIB::agentDhcpServerPoolType,INTEGER,read-only,,current,un-allocated(0):dynamic(1):manual(2),This specifies the type of the binding that is associated with this pool.
.1.3.6.1.4.1.4526.10.12.2.2.1.7,FASTPATH-DHCPSERVER-PRIVATE-MIB::agentDhcpServerPoolNetbiosNameServer,OCTET,read-write,,current,,This specifies the IP address-list of Net BIOS name-servers that are  available to DHCP clients (each IP address in this list is separated by comma and the list is terminated by semi-colon), an example would be 10.10.1.1,192.168.36.1,157.227.44.1;(no spaces in between).User should enter a 'null' or 'NULL' string to remove current Net BIOS name-server list.
.1.3.6.1.4.1.4526.10.12.2.2.1.8,FASTPATH-DHCPSERVER-PRIVATE-MIB::agentDhcpServerPoolNetbiosNodeType,INTEGER,read-write,,current,none(0):b-node(1):p-node(2):m-node(4):h-node(8),This specifies the NetBIOS node-type for DHCP clients. 'none' is shown if  node-type is not set to any of the four values.
.1.3.6.1.4.1.4526.10.12.2.2.1.9,FASTPATH-DHCPSERVER-PRIVATE-MIB::agentDhcpServerPoolNextServer,IpAddress,read-write,,current,,This configures the next server in the boot-process of a DHCP clients.User should enter zero(0.0.0.0) to remove the current Next-server address
.1.3.6.1.4.1.4526.10.12.2.2.1.10,FASTPATH-DHCPSERVER-PRIVATE-MIB::agentDhcpServerPoolDomainName,OCTET,read-write,,current,,This specifies the domain-name for a DHCP client. User should enter a 'null' or 'NULL' string to remove specified domain-name.
.1.3.6.1.4.1.4526.10.12.2.2.1.11,FASTPATH-DHCPSERVER-PRIVATE-MIB::agentDhcpServerPoolBootfile,OCTET,read-write,,current,,This specifies the name of the default boot image for a DHCP client.User should enter a 'null' or 'NULL' string to remove specified bootfile name.
.1.3.6.1.4.1.4526.10.12.2.2.1.12,FASTPATH-DHCPSERVER-PRIVATE-MIB::agentDhcpServerPoolRowStatus,INTEGER,read-write,,current,active(1):notInService(2):notReady(3):createAndGo(4):createAndWait(5):destroy(6),The row status variable is used according to installation and removal conventions for conceptual rows. When a pool is created by applying write operation on 'agentDhcpServerPoolCreateName',row-status becomes 'active'. If row-status for a poolEntry is set to 'destroy', the corresponding pool gets deleted. 
.1.3.6.1.4.1.4526.10.12.2.3,FASTPATH-DHCPSERVER-PRIVATE-MIB::agentDhcpServerPoolAllocationTable,,not-accessible,,current,,A table of the DHCP Server's pool entries, showing the binding(dynamic/manual) specific parameters.
.1.3.6.1.4.1.4526.10.12.2.3.1,FASTPATH-DHCPSERVER-PRIVATE-MIB::agentDhcpServerPoolAllocationEntry,,not-accessible,,current,,Represents entry for a Dhcp server's allocation pool.
.1.3.6.1.4.1.4526.10.12.2.3.1.1,FASTPATH-DHCPSERVER-PRIVATE-MIB::agentDhcpServerPoolAllocationName,OCTET,read-only,,current,,This specifies name of the DHCP Address pool having dynamic binding. This value is same as agentDhcpServerPoolName of the agentDhcpServerPoolConfigTable.
.1.3.6.1.4.1.4526.10.12.2.3.1.2,FASTPATH-DHCPSERVER-PRIVATE-MIB::agentDhcpServerDynamicPoolIpAddress,IpAddress,read-write,,current,,The IP address of the DHCP Address pool. The IP address must be set before setting the IP Mask or IP Prefix Length. After setting IP address, network -mask, or IP Prefix length must be set in order to change the pool type to dynamic. This value shows 0.0.0.0, if the binding type is 'un-allocated',or,'manual'.
.1.3.6.1.4.1.4526.10.12.2.3.1.3,FASTPATH-DHCPSERVER-PRIVATE-MIB::agentDhcpServerDynamicPoolIpMask,IpAddress,read-write,,current,,The bit-combination that renders which portion of the address of the DHCP address pool refers to the network or subnet and which part refers to the host.The IP address must have been set before. This value shows 0.0.0.0, if the binding type is 'un-allocated',or,'manual'.
.1.3.6.1.4.1.4526.10.12.2.3.1.4,FASTPATH-DHCPSERVER-PRIVATE-MIB::agentDhcpServerDynamicPoolIpPrefixLength,Unsigned32,read-write,,current,,This specifies the no. of bits that comprise the address-prefix. The prefix is an alternative way of specifying the network-mask of the client.The IP address must have been set before. This value shows 0, if the binding type is 'un-allocated',or,'mnaual'.
.1.3.6.1.4.1.4526.10.12.2.3.1.5,FASTPATH-DHCPSERVER-PRIVATE-MIB::agentDhcpServerPoolAllocationType,INTEGER,read-only,,current,un-allocated(0):dynamic(1):manual(2),This specifies the type of the binding that is associated with this pool.
.1.3.6.1.4.1.4526.10.12.2.3.1.6,FASTPATH-DHCPSERVER-PRIVATE-MIB::agentDhcpServerManualPoolClientIdentifier,OCTET,read-write,,current,,It specifies the unique identifier (in colon separated hexadecimal format) of a DHCP client. It is valid for manual bindings only. It displays 'unconfigured',if the binding type is 'un-allocated',or,'dynamic'. To set this object, input should be 7 octets long with the hardware type in the first octet.
.1.3.6.1.4.1.4526.10.12.2.3.1.7,FASTPATH-DHCPSERVER-PRIVATE-MIB::agentDhcpServerManualPoolClientName,OCTET,read-write,,current,,It specifies the name of a DHCP client. Client name should't include domain-name. It displays 'unconfigured',if the binding type is 'un-allocated',or,'dynamic'. 
.1.3.6.1.4.1.4526.10.12.2.3.1.8,FASTPATH-DHCPSERVER-PRIVATE-MIB::agentDhcpServerManualPoolClientHWAddr,OCTET,read-write,,current,,It specifies the hardware-address of a DHCP client. It is valid for manual bindings only. It displays 'unconfigured',if the binding type is 'un-allocated',or,'dynamic'. After hardware-address, hardware-type will be configured.
.1.3.6.1.4.1.4526.10.12.2.3.1.9,FASTPATH-DHCPSERVER-PRIVATE-MIB::agentDhcpServerManualPoolClientHWType,INTEGER,read-write,,current,ethernet(1):ieee802(6),It specifies the hardware-type of a DHCP client. It is valid for manual bindings only. It displays 'unconfigured',if the binding type is 'un-allocated',or,'dynamic'. Before this, hardware-address must be configured.
.1.3.6.1.4.1.4526.10.12.2.3.1.10,FASTPATH-DHCPSERVER-PRIVATE-MIB::agentDhcpServerManualPoolIpAddress,IpAddress,read-write,,current,,The IP address of the DHCP Address pool for manual binding. The IP address must be set before setting the IP Mask or IP Prefix Length.After setting IP address, network -mask, or IP Prefix length must be set in order to change the pool type to dynamic. This value shows 0.0.0.0, if the binding type is 'un-allocated',or,'dynamic'.
.1.3.6.1.4.1.4526.10.12.2.3.1.11,FASTPATH-DHCPSERVER-PRIVATE-MIB::agentDhcpServerManualPoolIpMask,IpAddress,read-write,,current,,The bit-combination that renders which portion of the address of the DHCP address pool for a manual binding refers to the network or subnet and which part refers to the host. The IP address must have been set before. This value shows 0.0.0.0, if the binding type is 'un-allocated',or,'dynamic'.
.1.3.6.1.4.1.4526.10.12.2.3.1.12,FASTPATH-DHCPSERVER-PRIVATE-MIB::agentDhcpServerManualPoolIpPrefixLength,Unsigned32,read-write,,current,,This specifies the no. of bits that comprise the address-prefix. The prefix is an alternative way of specifying the network-mask of the client.The IP address must have been set before. This value shows 0, if the binding type is 'un-allocated',or,'dynamic'.
.1.3.6.1.4.1.4526.10.12.2.4,FASTPATH-DHCPSERVER-PRIVATE-MIB::agentDhcpServerExcludedAddressRangeCreate,OCTET,read-write,,current,,It sets the IP address-ranges(from low to high) that a DHCP server should not assign to DHCP clients. Each time  this MIB object is set successfully, one excluded range  of IP address will be set. It is given in format - start and end IP address  separated by '-' and terminated by ';'. One example would be - 192.168.36.1-200.1.1.1; . This sets one excluded range of IP address,which starts at 192.168.36.1 and ends at 200.1.1.1.  If only start IP address is given, end IP address is assumed to be equal to the start IP address. Get operation on this MIB object returns a  null-value, as for the purpose of viewing the  exclude-address ranges, the user should perform the  traversal of agentDhcpServerExcludedAddressRangeTable. For this reason the get operation on object  agentDhcpServerExcludedAddressRangeCreate becomes insignificant.
.1.3.6.1.4.1.4526.10.12.2.5,FASTPATH-DHCPSERVER-PRIVATE-MIB::agentDhcpServerExcludedAddressRangeTable,,not-accessible,,current,,A table of the DHCP Server Pool configuration entries.
.1.3.6.1.4.1.4526.10.12.2.5.1,FASTPATH-DHCPSERVER-PRIVATE-MIB::agentDhcpServerExcludedAddressRangeEntry,,not-accessible,agentDhcpServerExcludedRangeIndex,current,,Represents entry for a Dhcp server excluded address range table.
.1.3.6.1.4.1.4526.10.12.2.5.1.1,FASTPATH-DHCPSERVER-PRIVATE-MIB::agentDhcpServerExcludedRangeIndex,Unsigned32,read-only,,current,,This specifies the index of the excluded IP address-range table.
.1.3.6.1.4.1.4526.10.12.2.5.1.2,FASTPATH-DHCPSERVER-PRIVATE-MIB::agentDhcpServerExcludedStartIpAddress,IpAddress,read-only,,current,,This specifies the starting IP address of the excluded address-range.
.1.3.6.1.4.1.4526.10.12.2.5.1.3,FASTPATH-DHCPSERVER-PRIVATE-MIB::agentDhcpServerExcludedEndIpAddress,IpAddress,read-only,,current,,This specifies the ending IP address of the excluded address-range.
.1.3.6.1.4.1.4526.10.12.2.5.1.4,FASTPATH-DHCPSERVER-PRIVATE-MIB::agentDhcpServerExcludedAddressRangeStatus,INTEGER,read-write,,current,active(1):notInService(2):notReady(3):createAndGo(4):createAndWait(5):destroy(6),This specifies the row-status of the excluded address-range. Implemented values are - active(1) and destroy(6). For a valid range, the row-satus will return active(1). When it is set to destroy(6), the corresponding address-range is deleted.
.1.3.6.1.4.1.4526.10.12.2.6,FASTPATH-DHCPSERVER-PRIVATE-MIB::agentDhcpServerPoolOptionCreate,OCTET,read-write,,current,,This sets the option for an existing DHCP Server pool. Here, it is required  to enter the pool-index, for which option is to be set and  the value of the DHCP option code in string-format : pool-index and option code  separated by '-' and terminated by ';', one example would be -> 1-19;  , 1 is the pool-index and 19 is the option code. 
.1.3.6.1.4.1.4526.10.12.2.7,FASTPATH-DHCPSERVER-PRIVATE-MIB::agentDhcpServerPoolOptionTable,,not-accessible,,current,,A table for configuring DHCP Server options.
.1.3.6.1.4.1.4526.10.12.2.7.1,FASTPATH-DHCPSERVER-PRIVATE-MIB::agentDhcpServerPoolOptionEntry,,not-accessible,agentDhcpServerPoolOptionIndex:agentDhcpServerPoolOptionCode,current,,Represents entry for a Dhcp server option table.
.1.3.6.1.4.1.4526.10.12.2.7.1.1,FASTPATH-DHCPSERVER-PRIVATE-MIB::agentDhcpServerPoolOptionIndex,Unsigned32,read-only,,current,,The Pool Index alongwith option-code, acts as index for the DHCP Server Option table. 
.1.3.6.1.4.1.4526.10.12.2.7.1.2,FASTPATH-DHCPSERVER-PRIVATE-MIB::agentDhcpServerPoolOptionCode,Unsigned32,read-write,,current,,This specifies the DHCP option code. This alongwith pool-index acts as the index of the  DHCP Server Option table.
.1.3.6.1.4.1.4526.10.12.2.7.1.3,FASTPATH-DHCPSERVER-PRIVATE-MIB::agentDhcpServerOptionPoolName,OCTET,read-only,,current,,The name of the DHCP Address pool. This value cannot be modified
.1.3.6.1.4.1.4526.10.12.2.7.1.4,FASTPATH-DHCPSERVER-PRIVATE-MIB::agentDhcpServerPoolOptionAsciiData,OCTET,read-write,,current,,This specifies an NVT ASCII character string. ASCII character strings  that contain white space must be delimited by quotation marks.  If an ascii optiondata is entered again, it gets concatenated with the  previous ascii data.
.1.3.6.1.4.1.4526.10.12.2.7.1.5,FASTPATH-DHCPSERVER-PRIVATE-MIB::agentDhcpServerPoolOptionHexData,OCTET,read-write,,current,,This specifies semi-colon separated hexadecimal data. Two hexadecimal digits  in hexadecimal character string represents one byte . Hexadecimal strings can  be entered in the following formats : 1) continuous hexadecimal digits like -- 0123456789abcdef 2) hexadecimal digits separated by space ' ' -- 01 23 45 67 de 0f 3) Two hexadecimal digits separated by delimeter ':' -- 01:02:a0 de:0f 78:5e  4) Four hexadecimal digits separated by delimeter '.' -- 01ab.c0de.7865  If a Hex optiondata is entered again, it gets concatenated with the  previous Hex data.
.1.3.6.1.4.1.4526.10.12.2.7.1.6,FASTPATH-DHCPSERVER-PRIVATE-MIB::agentDhcpServerPoolOptionIpAddressData,OCTET,read-write,,current,,This specifies the IP-address list(each IP-address is separated by comma and the list is terminated by semi-colon) for a DHCP client, an example would be 10.10.1.1,192.168.36.1,157.227.44.1;(no spaces in between). If a IP option is entered again, it gets concatenated with the  previous IP data. Maximum no. of IP addresses that can be entered at one time is 8. 
.1.3.6.1.4.1.4526.10.12.2.7.1.7,FASTPATH-DHCPSERVER-PRIVATE-MIB::agentDhcpServerPoolOptionStatus,INTEGER,read-write,,current,active(1):notInService(2):notReady(3):createAndGo(4):createAndWait(5):destroy(6),This specifies the row-status of the DHCP Server Pool option.
.1.3.6.1.4.1.4526.10.12.3,FASTPATH-DHCPSERVER-PRIVATE-MIB::agentDhcpServerLeaseGroup,,,,,,
.1.3.6.1.4.1.4526.10.12.3.1,FASTPATH-DHCPSERVER-PRIVATE-MIB::agentDhcpServerLeaseClearAllBindings,INTEGER,read-write,,current,enable(1):disable(2),Clears All the DHCP server bindings.
.1.3.6.1.4.1.4526.10.12.3.2,FASTPATH-DHCPSERVER-PRIVATE-MIB::agentDhcpServerLeaseTable,,not-accessible,,current,,A table of the DHCP Server's Lease entries.
.1.3.6.1.4.1.4526.10.12.3.2.1,FASTPATH-DHCPSERVER-PRIVATE-MIB::agentDhcpServerLeaseEntry,,not-accessible,agentDhcpServerLeaseIPAddress,current,,Represents entry for a Dhcp server's leases.
.1.3.6.1.4.1.4526.10.12.3.2.1.1,FASTPATH-DHCPSERVER-PRIVATE-MIB::agentDhcpServerLeaseIPAddress,IpAddress,read-only,,current,,This specifies the IP address leased to the client.
.1.3.6.1.4.1.4526.10.12.3.2.1.2,FASTPATH-DHCPSERVER-PRIVATE-MIB::agentDhcpServerLeaseIPMask,IpAddress,read-only,,current,,This specifies the IP mask of the address leased to the client.
.1.3.6.1.4.1.4526.10.12.3.2.1.3,FASTPATH-DHCPSERVER-PRIVATE-MIB::agentDhcpServerLeaseHWAddress,OCTET,read-only,,current,,This specifies the hardware address of the client.
.1.3.6.1.4.1.4526.10.12.3.2.1.4,FASTPATH-DHCPSERVER-PRIVATE-MIB::agentDhcpServerLeaseRemainingTime,TimeTicks,read-only,,current,,This specifies the period for which the lease is valid. It is displayed in days, hours, minutes, and seconds.
.1.3.6.1.4.1.4526.10.12.3.2.1.5,FASTPATH-DHCPSERVER-PRIVATE-MIB::agentDhcpServerLeaseType,INTEGER,read-only,,current,automatic(1):manual(2),This specifies the type of address lease as Automatic or Manual.
.1.3.6.1.4.1.4526.10.12.3.2.1.6,FASTPATH-DHCPSERVER-PRIVATE-MIB::agentDhcpServerLeaseStatus,INTEGER,read-write,,current,active(1):notInService(2):notReady(3):createAndGo(4):createAndWait(5):destroy(6),This specifies the row-status of the address-lease. Implemented values are - active(1) and destroy(6). For a valid range, the row-satus will return active(1). When it is set to destroy(6), the corresponding address-lease is cleared.
.1.3.6.1.4.1.4526.10.12.4,FASTPATH-DHCPSERVER-PRIVATE-MIB::agentDhcpServerAddressConflictGroup,,,,,,
.1.3.6.1.4.1.4526.10.12.4.1,FASTPATH-DHCPSERVER-PRIVATE-MIB::agentDhcpServerClearAllAddressConflicts,INTEGER,read-write,,current,enable(1):disable(2),Clears all the address-conflicts found by DHCP server,when set to enable.
.1.3.6.1.4.1.4526.10.12.4.2,FASTPATH-DHCPSERVER-PRIVATE-MIB::agentDhcpServerAddressConflictLogging,INTEGER,read-write,,current,enable(1):disable(2), It is used to enable, or disables the logging of address-conflicts on a DHCP Server.
.1.3.6.1.4.1.4526.10.12.4.3,FASTPATH-DHCPSERVER-PRIVATE-MIB::agentDhcpServerAddressConflictTable,,not-accessible,,current,,A table of the conflicting-address entries.
.1.3.6.1.4.1.4526.10.12.4.3.1,FASTPATH-DHCPSERVER-PRIVATE-MIB::agentDhcpServerAddressConflictEntry,,not-accessible,agentDhcpServerAddressConflictIP,current,,Represents a conflicting-address entry.
.1.3.6.1.4.1.4526.10.12.4.3.1.1,FASTPATH-DHCPSERVER-PRIVATE-MIB::agentDhcpServerAddressConflictIP,IpAddress,read-only,,current,,This specifies the conflicting IP address assigned to the client by DHCP server.
.1.3.6.1.4.1.4526.10.12.4.3.1.2,FASTPATH-DHCPSERVER-PRIVATE-MIB::agentDhcpServerAddressConflictDetectionType,INTEGER,read-only,,current,ping(1):gratuitousArp(2),This specifies the address-conflict detection-method.
.1.3.6.1.4.1.4526.10.12.4.3.1.3,FASTPATH-DHCPSERVER-PRIVATE-MIB::agentDhcpServerAddressConflictDetectionTime,TimeTicks,read-only,,current,,This specifies the sysUpTime at which the address-conflict was detected.
.1.3.6.1.4.1.4526.10.12.4.3.1.4,FASTPATH-DHCPSERVER-PRIVATE-MIB::agentDhcpServerAddressConflictStatus,INTEGER,read-write,,current,active(1):notInService(2):notReady(3):createAndGo(4):createAndWait(5):destroy(6),This specifies the row-status of the conflicting-address entry. Implemented values are - active(1) and destroy(6). For a valid range, the row-satus will return active(1). When it is set to destroy(6), the corresponding conflicting-address entry is cleared.
.1.3.6.1.4.1.4526.10.13,FASTPATH-INVENTORY-MIB::fastPathInventory,,,,,,This MIB defines the objects used for FastPath to  configure and report information and status of units,  slots and supported cards.
.1.3.6.1.4.1.4526.10.13.0,FASTPATH-INVENTORY-MIB::agentInventoryTraps,,,,,,
.1.3.6.1.4.1.4526.10.13.0.1,FASTPATH-INVENTORY-MIB::agentInventoryCardMismatch,,,,,,Sent when a card is inserted which is a different type than  what the slot was configured for.
.1.3.6.1.4.1.4526.10.13.0.2,FASTPATH-INVENTORY-MIB::agentInventoryCardUnsupported,,,,,,Sent when a card is inserted which is of a type that is not  supported by the slot.
.1.3.6.1.4.1.4526.10.13.0.3,FASTPATH-INVENTORY-MIB::agentInventoryStackPortLinkUp,,,,,,Sent when a Stack Port is connected to annother Stack Member.
.1.3.6.1.4.1.4526.10.13.0.4,FASTPATH-INVENTORY-MIB::agentInventoryStackPortLinkDown,,,,,,Sent when a Stack Port is disconnected from annother Stack Member.
.1.3.6.1.4.1.4526.10.13.1,FASTPATH-INVENTORY-MIB::agentInventoryStackGroup,,,,,,
.1.3.6.1.4.1.4526.10.13.1.1,FASTPATH-INVENTORY-MIB::agentInventoryStackReplicateSTK,INTEGER,read-write,,current,enable(1):disable(2),Initiates STK copy from management unit to all other management capable units in the stack.
.1.3.6.1.4.1.4526.10.13.1.2,FASTPATH-INVENTORY-MIB::agentInventoryStackReload,INTEGER,read-write,,current,enable(1):disable(2),Initiates stack reload.
.1.3.6.1.4.1.4526.10.13.1.3,FASTPATH-INVENTORY-MIB::agentInventoryStackMaxUnitNumber,Unsigned32,read-only,,current,,Indicates the maximum allowed Unit Number configurable on the stack.
.1.3.6.1.4.1.4526.10.13.1.4,FASTPATH-INVENTORY-MIB::agentInventoryStackReplicateSTKStatus,INTEGER,read-only,,current,inProgress(1):notInProgress(2):finishedWithSuccess(3):finishedWithError(4),Indicates the current status of an STK copy from management unit to all other  management capable units inthe stack.
.1.3.6.1.4.1.4526.10.13.1.5,FASTPATH-INVENTORY-MIB::agentInventoryStackSTKname,INTEGER,read-write,,current,unconfigured(1):image1(2):image2(3),STK file on management unit for copy/activate/delete operations to all units in the stack unconfigured(1) - indicates a default state and can not be set.
.1.3.6.1.4.1.4526.10.13.1.6,FASTPATH-INVENTORY-MIB::agentInventoryStackActivateSTK,INTEGER,read-write,,current,enable(1):disable(2),Activates the specified STK file on all units on the stack.
.1.3.6.1.4.1.4526.10.13.1.7,FASTPATH-INVENTORY-MIB::agentInventoryStackDeleteSTK,INTEGER,read-write,,current,enable(1):disable(2),Deletes the specified STK file from all units on the stack.
.1.3.6.1.4.1.4526.10.13.2,FASTPATH-INVENTORY-MIB::agentInventoryUnitGroup,,,,,,
.1.3.6.1.4.1.4526.10.13.2.1,FASTPATH-INVENTORY-MIB::agentInventorySupportedUnitTable,,not-accessible,,current,,TODO
.1.3.6.1.4.1.4526.10.13.2.1.1,FASTPATH-INVENTORY-MIB::agentInventorySupportedUnitEntry,,not-accessible,agentInventorySupportedUnitIndex,current,,TODO
.1.3.6.1.4.1.4526.10.13.2.1.1.1,FASTPATH-INVENTORY-MIB::agentInventorySupportedUnitIndex,Unsigned32,not-accessible,,current,,The unit identifier associated with the supported unit.
.1.3.6.1.4.1.4526.10.13.2.1.1.4,FASTPATH-INVENTORY-MIB::agentInventorySupportedUnitModelIdentifier,OCTET,read-only,,current,,The model identifier for the supported unit.
.1.3.6.1.4.1.4526.10.13.2.1.1.5,FASTPATH-INVENTORY-MIB::agentInventorySupportedUnitDescription,OCTET,read-only,,current,,The description of the supported unit.
.1.3.6.1.4.1.4526.10.13.2.1.1.6,FASTPATH-INVENTORY-MIB::agentInventorySupportedUnitExpectedCodeVer,OCTET,read-only,,current,,The expected code version.
.1.3.6.1.4.1.4526.10.13.2.2,FASTPATH-INVENTORY-MIB::agentInventoryUnitTable,,not-accessible,,current,,A table of Per-Unit configuration objects.
.1.3.6.1.4.1.4526.10.13.2.2.1,FASTPATH-INVENTORY-MIB::agentInventoryUnitEntry,,not-accessible,agentInventoryUnitNumber,current,,Each Instance corresponds with a different unit managed by this agent.
.1.3.6.1.4.1.4526.10.13.2.2.1.1,FASTPATH-INVENTORY-MIB::agentInventoryUnitNumber,Unsigned32,not-accessible,,current,,The unit number associated with this unit.
.1.3.6.1.4.1.4526.10.13.2.2.1.2,FASTPATH-INVENTORY-MIB::agentInventoryUnitAssignNumber,Unsigned32,read-create,,current,,Allows setting the unit number associated with this unit. This number must  be less than the value returned by agentInventoryStackMaxUnitNumber. Setting  this object to a non-zero value will initate changing the unit number.
.1.3.6.1.4.1.4526.10.13.2.2.1.3,FASTPATH-INVENTORY-MIB::agentInventoryUnitType,Unsigned32,read-only,,current,,The Unit Type identifier for this unit.
.1.3.6.1.4.1.4526.10.13.2.2.1.4,FASTPATH-INVENTORY-MIB::agentInventoryUnitSupportedUnitIndex,Unsigned32,read-create,,current,,The index of the unit type in agentInventorySupportedUnitTable which this unit is associated with.
.1.3.6.1.4.1.4526.10.13.2.2.1.6,FASTPATH-INVENTORY-MIB::agentInventoryUnitMgmtAdmin,INTEGER,read-create,,current,mgmtUnit(1):stackUnit(2):mgmtUnassigned(3),Indicates whether the unit is a Management Unit, a Stack Unit, or has  been configured to be a Management Unit.  Setting this object to mgmtUnit(1) initiates transfer of the  management functionality to the specified stack unit. Object values  stackUnit(2) and mgmtUnassigned(3) cannot be set.
.1.3.6.1.4.1.4526.10.13.2.2.1.7,FASTPATH-INVENTORY-MIB::agentInventoryUnitHWMgmtPref,INTEGER,read-only,,current,disabled(0):unsassigned(1):assigned(2),Indicates the default preference assigned to the unit.
.1.3.6.1.4.1.4526.10.13.2.2.1.8,FASTPATH-INVENTORY-MIB::agentInventoryUnitHWMgmtPrefValue,Unsigned32,read-only,,current,,Indicates the default preference value assigned to the unit.  The preference value indicates how likely this unit is to be  chosen as the management unit. A value of 0 indicates a disabled or unassigned preference.
.1.3.6.1.4.1.4526.10.13.2.2.1.9,FASTPATH-INVENTORY-MIB::agentInventoryUnitAdminMgmtPref,INTEGER,read-create,,current,disabled(0):unsassigned(1):assigned(2),Indicates the configured preference assigned to the unit. This object can not be set to assigned(3). Setting this object to disabled(1), or unassigned(2) will set agentInventoryUnitHWMgmtPrefValue to 0.
.1.3.6.1.4.1.4526.10.13.2.2.1.10,FASTPATH-INVENTORY-MIB::agentInventoryUnitAdminMgmtPrefValue,Unsigned32,read-create,,current,,Indicates the configured preference value assigned to the unit.  The preference value indicates how likely this unit is to be  chosen as the management unit. A value of 0 indicates a disabled or unassigned preference. Setting this object to 0 will also set agentInventoryUnitHWMgmtPref to unassigned(2). Setting this object to a non-zero value will set agentInventoryUnitHWMgmtPref to assigned(3). This value overrides the value of  agentInventoryUnitHWMgmtPref if assigned.
.1.3.6.1.4.1.4526.10.13.2.2.1.11,FASTPATH-INVENTORY-MIB::agentInventoryUnitStatus,INTEGER,read-only,,current,ok(1):unsupported(2):codeMismatch(3):configMismatch(4):notPresent(5),The unit status of this unit.
.1.3.6.1.4.1.4526.10.13.2.2.1.12,FASTPATH-INVENTORY-MIB::agentInventoryUnitDetectedCodeVer,OCTET,read-only,,current,,The version of code running on this unit. If the unit is not  detected then the code version is an empty string.
.1.3.6.1.4.1.4526.10.13.2.2.1.13,FASTPATH-INVENTORY-MIB::agentInventoryUnitDetectedCodeInFlashVer,OCTET,read-only,,current,,The version of code that is currently stored in FLASH  memory on the unit. This code will execute after the unit  is reset. If the unit is not detected then this object will  return an empty string.
.1.3.6.1.4.1.4526.10.13.2.2.1.14,FASTPATH-INVENTORY-MIB::agentInventoryUnitUpTime,TimeTicks,read-only,,current,,The system up time of the unit.
.1.3.6.1.4.1.4526.10.13.2.2.1.15,FASTPATH-INVENTORY-MIB::agentInventoryUnitDescription,OCTET,read-only,,current,,The description of the unit.
.1.3.6.1.4.1.4526.10.13.2.2.1.16,FASTPATH-INVENTORY-MIB::agentInventoryUnitReplicateSTK,INTEGER,read-write,,current,enable(1):disable(2),Initiates the specified STK file copy from management unit to this unit.
.1.3.6.1.4.1.4526.10.13.2.2.1.17,FASTPATH-INVENTORY-MIB::agentInventoryUnitReload,INTEGER,read-write,,current,enable(1):disable(2),Reload a specific unit in the stack.
.1.3.6.1.4.1.4526.10.13.2.2.1.18,FASTPATH-INVENTORY-MIB::agentInventoryUnitRowStatus,INTEGER,read-create,,current,active(1):notInService(2):notReady(3):createAndGo(4):createAndWait(5):destroy(6),The status of this unit instance. Creation of new instances requires the object agentInventoryUnitSupportedUnitIndex to be set at the same time to indicate the type  of of unit to pre-configure.  active(1) - This instance is active. createAndGo(4) - Creates a new instance. destroy(6) - Removes this instance.
.1.3.6.1.4.1.4526.10.13.2.2.1.19,FASTPATH-INVENTORY-MIB::agentInventoryUnitSerialNumber,OCTET,read-only,,current,,The Serial Number of the unit.
.1.3.6.1.4.1.4526.10.13.2.2.1.20,FASTPATH-INVENTORY-MIB::agentInventoryUnitImage1Version,OCTET,read-only,,current,,Code version for Image1.
.1.3.6.1.4.1.4526.10.13.2.2.1.21,FASTPATH-INVENTORY-MIB::agentInventoryUnitImage2Version,OCTET,read-only,,current,,Code version for Image2.
.1.3.6.1.4.1.4526.10.13.2.2.1.22,FASTPATH-INVENTORY-MIB::agentInventoryUnitSTKname,INTEGER,read-write,,current,image1(2):image2(3),STK file to be used for copy/delete/activate operatiosn.
.1.3.6.1.4.1.4526.10.13.2.2.1.23,FASTPATH-INVENTORY-MIB::agentInventoryUnitActivateSTK,INTEGER,read-write,,current,enable(1):disable(2),Activates the specified STK file on this unit.
.1.3.6.1.4.1.4526.10.13.2.2.1.24,FASTPATH-INVENTORY-MIB::agentInventoryUnitDeleteSTK,INTEGER,read-write,,current,enable(1):disable(2),Deletes the specified STK file on this unit.
.1.3.6.1.4.1.4526.10.13.2.2.1.25,FASTPATH-INVENTORY-MIB::agentInventoryUnitReplicateSTKStatus,INTEGER,read-only,,current,inProgress(1):notInProgress(2):finishedWithSuccess(3):finishedWithError(4),Indicates the current status of an STK copy from the management unit to another management capable unit in the stack.
.1.3.6.1.4.1.4526.10.13.2.2.1.26,FASTPATH-INVENTORY-MIB::agentInventoryUnitStandby,INTEGER,read-write,,current,unassigned(1):standby-opr(2):standby-cfg(3),Configures the standby status of this unit. The Management unit may not be  configured. A unit that is standby_cfg(3) may be set to uassigned(1) to clear  standby configuration. A unit that is standby_opr(2) may NOT be set to unassigned(1).
.1.3.6.1.4.1.4526.10.13.3,FASTPATH-INVENTORY-MIB::agentInventorySlotGroup,,,,,,
.1.3.6.1.4.1.4526.10.13.3.1,FASTPATH-INVENTORY-MIB::agentInventorySlotTable,,not-accessible,,current,,TODO
.1.3.6.1.4.1.4526.10.13.3.1.1,FASTPATH-INVENTORY-MIB::agentInventorySlotEntry,,not-accessible,agentInventoryUnitNumber:agentInventorySlotNumber,current,,TODO
.1.3.6.1.4.1.4526.10.13.3.1.1.1,FASTPATH-INVENTORY-MIB::agentInventorySlotNumber,Unsigned32,not-accessible,,current,,An incrimental index of the slot in this unit.
.1.3.6.1.4.1.4526.10.13.3.1.1.3,FASTPATH-INVENTORY-MIB::agentInventorySlotStatus,INTEGER,read-only,,current,empty(1):full(2):error(3),Indicates the current status of the slot.
.1.3.6.1.4.1.4526.10.13.3.1.1.4,FASTPATH-INVENTORY-MIB::agentInventorySlotPowerMode,INTEGER,read-write,,current,enable(1):disable(2),Indicates whether a card in this slot will be powered on.
.1.3.6.1.4.1.4526.10.13.3.1.1.5,FASTPATH-INVENTORY-MIB::agentInventorySlotAdminMode,INTEGER,read-write,,current,enable(1):disable(2),Indicates whether this card is administratively enabled or  disabled.
.1.3.6.1.4.1.4526.10.13.3.1.1.6,FASTPATH-INVENTORY-MIB::agentInventorySlotInsertedCardType,Unsigned32,read-only,,current,,Indicates the inserted card type. Will return 0 if the slot is  not full.
.1.3.6.1.4.1.4526.10.13.3.1.1.7,FASTPATH-INVENTORY-MIB::agentInventorySlotConfiguredCardType,Unsigned32,read-write,,current,,Indicates the configured card type. This object may be set with a corresponding value of agentInventoryCardType if this slot supports removable cards.
.1.3.6.1.4.1.4526.10.13.3.1.1.8,FASTPATH-INVENTORY-MIB::agentInventorySlotCapabilities,BITS,read-only,,current,pluggable(0):power-down(1),Indicates the different capabilities this slot has.  pluggable(0) - This slot can contain pluggable cards. power-down(1) - Power to this slot can be controlled through the object agentInventorySlotPowerMode 
.1.3.6.1.4.1.4526.10.13.4,FASTPATH-INVENTORY-MIB::agentInventoryCardGroup,,,,,,
.1.3.6.1.4.1.4526.10.13.4.1,FASTPATH-INVENTORY-MIB::agentInventoryCardTypeTable,,not-accessible,,current,,Contains information for all supported Card Types in the system.
.1.3.6.1.4.1.4526.10.13.4.1.1,FASTPATH-INVENTORY-MIB::agentInventoryCardTypeEntry,,not-accessible,agentInventoryCardIndex,current,,Contains information related to a specific Card Type.
.1.3.6.1.4.1.4526.10.13.4.1.1.1,FASTPATH-INVENTORY-MIB::agentInventoryCardIndex,Unsigned32,not-accessible,,current,,An arbitrary index used to identify cards in the table.
.1.3.6.1.4.1.4526.10.13.4.1.1.2,FASTPATH-INVENTORY-MIB::agentInventoryCardType,Unsigned32,read-only,,current,,The Card Type associated with this instance.
.1.3.6.1.4.1.4526.10.13.4.1.1.3,FASTPATH-INVENTORY-MIB::agentInventoryCardModelIdentifier,OCTET,read-only,,current,,The model identifier for the supported Card Type.
.1.3.6.1.4.1.4526.10.13.4.1.1.4,FASTPATH-INVENTORY-MIB::agentInventoryCardDescription,OCTET,read-only,,current,,The card description for the supported Card Type.
.1.3.6.1.4.1.4526.10.13.5,FASTPATH-INVENTORY-MIB::agentInventoryComponentGroup,,,,,,
.1.3.6.1.4.1.4526.10.13.5.1,FASTPATH-INVENTORY-MIB::agentInventoryComponentTable,,not-accessible,,current,,Contains information for all supported Components in the system.
.1.3.6.1.4.1.4526.10.13.5.1.1,FASTPATH-INVENTORY-MIB::agentInventoryComponentEntry,,not-accessible,agentInventoryComponentIndex,current,,Contains information related to a specific Components.
.1.3.6.1.4.1.4526.10.13.5.1.1.1,FASTPATH-INVENTORY-MIB::agentInventoryComponentIndex,Unsigned32,not-accessible,,current,,An arbitrary index used to reference components in the table.
.1.3.6.1.4.1.4526.10.13.5.1.1.2,FASTPATH-INVENTORY-MIB::agentInventoryComponentMnemonic,OCTET,read-only,,current,,The abreviated name of this component.
.1.3.6.1.4.1.4526.10.13.5.1.1.3,FASTPATH-INVENTORY-MIB::agentInventoryComponentName,OCTET,read-only,,current,,The name of the component for this instance.
.1.3.6.1.4.1.4526.10.13.6,FASTPATH-INVENTORY-MIB::fastPathInventoryConformance,,,,,,
.1.3.6.1.4.1.4526.10.13.6.1,FASTPATH-INVENTORY-MIB::fastPathInventoryCompliances,,,,,,
.1.3.6.1.4.1.4526.10.13.6.1.1,FASTPATH-INVENTORY-MIB::fastPathInventoryCompliance,,,,,,The compliance statement for SNMP entities which implement version 1 of the fastPathInventory MIB.
.1.3.6.1.4.1.4526.10.13.6.1.2,FASTPATH-INVENTORY-MIB::fastPathInventoryCompliance2,,,,,,The compliance statement for SNMP entities which implement version 2 of the fastPathInventory MIB.
.1.3.6.1.4.1.4526.10.13.6.2,FASTPATH-INVENTORY-MIB::fastPathInventoryGroups,,,,,,
.1.3.6.1.4.1.4526.10.13.6.2.1,FASTPATH-INVENTORY-MIB::fastPathInventorySupportedUnitGroup,,,,,,The collection of objects which are used to represent multiple units in the stack.
.1.3.6.1.4.1.4526.10.13.6.2.2,FASTPATH-INVENTORY-MIB::fastPathInventoryUnitGroup,,,,,,The collection of objects which are used to represent multiple units in the stack.
.1.3.6.1.4.1.4526.10.13.6.2.3,FASTPATH-INVENTORY-MIB::fastPathInventorySlotGroup,,,,,,The collection of objects which are used to represent slots in the each unit managed by this agent.
.1.3.6.1.4.1.4526.10.13.6.2.4,FASTPATH-INVENTORY-MIB::fastPathInventoryCardGroup,,,,,,The collection of objects which are used to represent the card types this system can manage.
.1.3.6.1.4.1.4526.10.13.6.2.5,FASTPATH-INVENTORY-MIB::fastPathInventoryNotificationsGroup,,,,,,The collection of notifications used to indicate problems associated with the insertion of cards.
.1.3.6.1.4.1.4526.10.13.7,FASTPATH-INVENTORY-MIB::agentInventoryStackPortGroup,,,,,,
.1.3.6.1.4.1.4526.10.13.7.1,FASTPATH-INVENTORY-MIB::agentInventoryStackPortIpTelephonyQOSSupport,INTEGER,read-write,,current,enable(1):disable(2),Controls whether the Stack Ports give higher priority to IP Telephony traffic.
.1.3.6.1.4.1.4526.10.13.7.2,FASTPATH-INVENTORY-MIB::agentInventoryStackPortTable,,not-accessible,,current,,Contains information for all Stack Ports present in the system.
.1.3.6.1.4.1.4526.10.13.7.2.1,FASTPATH-INVENTORY-MIB::agentInventoryStackPortEntry,,not-accessible,agentInventoryStackPortIndex,current,,Contains information related to a specific Stack Port.
.1.3.6.1.4.1.4526.10.13.7.2.1.1,FASTPATH-INVENTORY-MIB::agentInventoryStackPortIndex,Unsigned32,not-accessible,,current,,An arbitrary index used to reference Stack Ports in the table.
.1.3.6.1.4.1.4526.10.13.7.2.1.2,FASTPATH-INVENTORY-MIB::agentInventoryStackPortUnit,Unsigned32,read-only,,current,,The Unit Index this Stack Port is physically located on.
.1.3.6.1.4.1.4526.10.13.7.2.1.3,FASTPATH-INVENTORY-MIB::agentInventoryStackPortTag,OCTET,read-only,,current,,The name of the Stack Port for this instance.
.1.3.6.1.4.1.4526.10.13.7.2.1.4,FASTPATH-INVENTORY-MIB::agentInventoryStackPortConfiguredStackMode,INTEGER,read-write,,current,stack(1):ethernet(2),Configured mode of the Stack Port. Changes to this value happen only after a reset of the switch.
.1.3.6.1.4.1.4526.10.13.7.2.1.5,FASTPATH-INVENTORY-MIB::agentInventoryStackPortRunningStackMode,INTEGER,read-only,,current,stack(1):ethernet(2),Currently operational mode of the Stack Port.
.1.3.6.1.4.1.4526.10.13.7.2.1.6,FASTPATH-INVENTORY-MIB::agentInventoryStackPortLinkStatus,INTEGER,read-only,,current,up(1):down(2),Link status of the Stack Port. Ports which are in ethernet mode will return a status of down(2).
.1.3.6.1.4.1.4526.10.13.7.2.1.7,FASTPATH-INVENTORY-MIB::agentInventoryStackPortLinkSpeed,Gauge32,read-only,,current,,Speed of the Stack Port measured in Gb/s. Ports which are in ethernet mode will return a speed of 0.
.1.3.6.1.4.1.4526.10.13.7.2.1.8,FASTPATH-INVENTORY-MIB::agentInventoryStackPortDataRate,Counter32,read-only,,current,,Approximate data rate on the stacking port. Measured in Gb/s. Ports which are in ethernet mode will return 0.
.1.3.6.1.4.1.4526.10.13.7.2.1.9,FASTPATH-INVENTORY-MIB::agentInventoryStackPortErrorRate,Counter32,read-only,,current,,Approximate error rate on the stack port. Measured in Errors  per Second. Ports which are in ethernet mode will return 0.
.1.3.6.1.4.1.4526.10.13.7.2.1.10,FASTPATH-INVENTORY-MIB::agentInventoryStackPortTotalErrors,Counter32,read-only,,current,,Number of errors since boot. The counter may wrap. Ports  which are in ethernet mode will return 0.
.1.3.6.1.4.1.4526.10.14,FASTPATH-LOGGING-MIB::fastPathLogging,,,,,,This MIB provides objects to configure and display events logged on this system.
.1.3.6.1.4.1.4526.10.14.1,FASTPATH-LOGGING-MIB::agentLogConfigGroup,,,,,,
.1.3.6.1.4.1.4526.10.14.1.1,FASTPATH-LOGGING-MIB::agentLogInMemoryConfigGroup,,,,,,
.1.3.6.1.4.1.4526.10.14.1.1.1,FASTPATH-LOGGING-MIB::agentLogInMemoryAdminStatus,INTEGER,read-write,,current,enable(1):disable(2),Administratively enable/disable the In Memory log.
.1.3.6.1.4.1.4526.10.14.1.1.4,FASTPATH-LOGGING-MIB::agentLogInMemoryBehavior,INTEGER,read-write,,current,wrap(1):stop-on-full(2),Configures the behavior of the In Memory Log when it becomes full. A value of wrap(1) will cause the oldest log message to be removed, making room for the new message. A value of stop-on-full(2) will prevent any further logging.
.1.3.6.1.4.1.4526.10.14.1.2,FASTPATH-LOGGING-MIB::agentLogConsoleConfigGroup,,,,,,
.1.3.6.1.4.1.4526.10.14.1.2.1,FASTPATH-LOGGING-MIB::agentLogConsoleAdminStatus,INTEGER,read-write,,current,enable(1):disable(2),Admin mode for console logs
.1.3.6.1.4.1.4526.10.14.1.2.2,FASTPATH-LOGGING-MIB::agentLogConsoleSeverityFilter,INTEGER,read-write,,current,emergency(0):alert(1):critical(2):error(3):warning(4):notice(5):informational(6):debug(7),Severity filter for console logs
.1.3.6.1.4.1.4526.10.14.1.3,FASTPATH-LOGGING-MIB::agentLogPersistentConfigGroup,,,,,,
.1.3.6.1.4.1.4526.10.14.1.3.1,FASTPATH-LOGGING-MIB::agentLogPersistentAdminStatus,INTEGER,read-write,,current,enable(1):disable(2),This control disables/enables logging for the persistent startup log. Setting this  value to disable does not clear the current contents of the log.
.1.3.6.1.4.1.4526.10.14.1.3.2,FASTPATH-LOGGING-MIB::agentLogPersistentSeverityFilter,INTEGER,read-write,,current,emergency(0):alert(1):critical(2):error(3):warning(4):notice(5):informational(6):debug(7),This control specifies the minimum severity to log to the startup and operation log.  Messages with an equal or lower numerical severity are logged.
.1.3.6.1.4.1.4526.10.14.1.4,FASTPATH-LOGGING-MIB::agentLogSysLogConfigGroup,,,,,,
.1.3.6.1.4.1.4526.10.14.1.4.1,FASTPATH-LOGGING-MIB::agentLogSyslogAdminStatus,INTEGER,read-write,,current,enable(1):disable(2),For Enabling and Disabling logging to configured syslog hosts. Setting this to disable  stops logging to all syslog hosts.
.1.3.6.1.4.1.4526.10.14.1.4.3,FASTPATH-LOGGING-MIB::agentLogSyslogLocalPort,Unsigned32,read-write,,current,,This is the port on the local host from which syslog messages are sent.
.1.3.6.1.4.1.4526.10.14.1.4.4,FASTPATH-LOGGING-MIB::agentLogSyslogMaxHosts,Unsigned32,read-only,,current,,Maximum number of hosts that can be configured for logging syslog messages.
.1.3.6.1.4.1.4526.10.14.1.4.5,FASTPATH-LOGGING-MIB::agentLogSyslogHostTable,,not-accessible,,current,,Syslog host table containing syslog host entries.
.1.3.6.1.4.1.4526.10.14.1.4.5.1,FASTPATH-LOGGING-MIB::agentLogSyslogHostEntry,,not-accessible,agentLogHostTableIndex,current,,Syslog Host entry attributes.
.1.3.6.1.4.1.4526.10.14.1.4.5.1.1,FASTPATH-LOGGING-MIB::agentLogHostTableIndex,Unsigned32,not-accessible,,current,,Index to syslog host entry in syslog host table.
.1.3.6.1.4.1.4526.10.14.1.4.5.1.2,FASTPATH-LOGGING-MIB::agentLogHostTableIpAddressType,INTEGER,read-create,,current,unknown(0):ipv4(1):ipv6(2):ipv4z(3):ipv6z(4):dns(16),Syslog Host table IP Address Type.
.1.3.6.1.4.1.4526.10.14.1.4.5.1.3,FASTPATH-LOGGING-MIB::agentLogHostTableIpAddress,OCTET,read-create,,current,,Syslog Host table IP Address.
.1.3.6.1.4.1.4526.10.14.1.4.5.1.4,FASTPATH-LOGGING-MIB::agentLogHostTablePort,Unsigned32,read-create,,current,,Syslog Host table port number.
.1.3.6.1.4.1.4526.10.14.1.4.5.1.5,FASTPATH-LOGGING-MIB::agentLogHostTableSeverityFilter,INTEGER,read-create,,current,emergency(0):alert(1):critical(2):error(3):warning(4):notice(5):informational(6):debug(7),Configures the minimum severity that will be stored in the In Memory log.
.1.3.6.1.4.1.4526.10.14.1.4.5.1.7,FASTPATH-LOGGING-MIB::agentLogHostTableRowStatus,INTEGER,read-create,,current,active(1):notInService(2):notReady(3):createAndGo(4):createAndWait(5):destroy(6),Syslog Host table row status
.1.3.6.1.4.1.4526.10.14.1.5,FASTPATH-LOGGING-MIB::agentLogCliCommandsConfigGroup,,,,,,
.1.3.6.1.4.1.4526.10.14.1.5.1,FASTPATH-LOGGING-MIB::agentLogCliCommandsAdminStatus,INTEGER,read-write,,current,enable(1):disable(2),Administratively enable/disable the logging of the CLI Commands 
.1.3.6.1.4.1.4526.10.14.2,FASTPATH-LOGGING-MIB::agentLogStatisticsGroup,,,,,,
.1.3.6.1.4.1.4526.10.14.2.1,FASTPATH-LOGGING-MIB::agentLogMessagesReceived,Counter32,read-only,,current,,The number of messages received by the log process. This includes messages that are  dropped or ignored.
.1.3.6.1.4.1.4526.10.14.2.2,FASTPATH-LOGGING-MIB::agentLogMessagesDropped,Counter32,read-only,,current,,The number of messages that could not be processed due to error or lack of resources.
.1.3.6.1.4.1.4526.10.14.2.3,FASTPATH-LOGGING-MIB::agentLogSyslogMessagesRelayed,Counter32,read-only,,current,,The number of messages forwarded by the syslog function to a syslog host. Messages forwarded  to multiple hosts are counted once for each host.
.1.3.6.1.4.1.4526.10.14.2.4,FASTPATH-LOGGING-MIB::agentLogSyslogMessagesIgnored,Counter32,read-only,,deprecated,,The number of messages that were not processed by the syslog process because the component name  or the priority level did not match any specification.
.1.3.6.1.4.1.4526.10.14.2.5,FASTPATH-LOGGING-MIB::agentLogMessageReceivedTime,OCTET,read-only,,current,,The local time when a message was last received by the log subsystem specified as the number of  non-leap seconds since 00:00:00 UTC on January 1 1970.
.1.3.6.1.4.1.4526.10.14.2.6,FASTPATH-LOGGING-MIB::agentLogSyslogMessageDeliveredTime,OCTET,read-only,,current,,The local time when a message was last delivered to a syslog host specified as the number of non-leap  seconds since 00:00:00 UTC on January 1 1970.
.1.3.6.1.4.1.4526.10.14.3,FASTPATH-LOGGING-MIB::agentLogInMemoryGroup,,,,,,
.1.3.6.1.4.1.4526.10.14.3.1,FASTPATH-LOGGING-MIB::agentLogInMemoryLogCount,Gauge32,read-only,,current,,The count of valid entries in the in-memory log.
.1.3.6.1.4.1.4526.10.14.3.2,FASTPATH-LOGGING-MIB::agentLogInMemoryTable,,not-accessible,,current,,The in-memory log table containing sequence of in-memory log entries.
.1.3.6.1.4.1.4526.10.14.3.2.1,FASTPATH-LOGGING-MIB::agentLogInMemoryEntry,,not-accessible,agentLogInMemoryMsgIndex,current,,An individual message entry in in-memory log table.
.1.3.6.1.4.1.4526.10.14.3.2.1.1,FASTPATH-LOGGING-MIB::agentLogInMemoryMsgIndex,Unsigned32,not-accessible,,current,,The index to message entry in the in-memory log table.
.1.3.6.1.4.1.4526.10.14.3.2.1.2,FASTPATH-LOGGING-MIB::agentLogInMemoryMsgText,OCTET,read-only,,current,,Message text info for inmemory logged messages.
.1.3.6.1.4.1.4526.10.14.4,FASTPATH-LOGGING-MIB::agentLogPersistentGroup,,,,,,
.1.3.6.1.4.1.4526.10.14.4.1,FASTPATH-LOGGING-MIB::agentLogPersistentLogCount,Counter32,read-only,,current,,The count of valid entries in the persistent log.
.1.3.6.1.4.1.4526.10.14.4.4,FASTPATH-LOGGING-MIB::agentLogPersistentTable,,not-accessible,,current,,Table for storing persistent log messages.
.1.3.6.1.4.1.4526.10.14.4.4.1,FASTPATH-LOGGING-MIB::agentLogPersistentEntry,,not-accessible,agentLogMsgPersistentMsgIndex,current,,Log entry details for logging message in persistent log table.
.1.3.6.1.4.1.4526.10.14.4.4.1.1,FASTPATH-LOGGING-MIB::agentLogMsgPersistentMsgIndex,Unsigned32,not-accessible,,current,,Table index for logging message in persistent log table.
.1.3.6.1.4.1.4526.10.14.4.4.1.2,FASTPATH-LOGGING-MIB::agentLogMsgPersistentMsgText,OCTET,read-only,,current,,The text corresponding to persistent log message.
.1.3.6.1.4.1.4526.10.15,BROADCOM-POWER-ETHERNET-MIB::fastPathpowerEthernetMIB,,,,,,This MIB Augments the POWER-ETHERNET-MIB created by the IETF Ethernet  Interfaces and Hub MIB Working Group for managing Power Source  Equipment (PSE). The objects in this MIB are intended to provide  additional objects for reporting information available to the hardware  on this platform which are not represented in the draft MIB.
.1.3.6.1.4.1.4526.10.15.1,BROADCOM-POWER-ETHERNET-MIB::agentPethObjects,,,,,,
.1.3.6.1.4.1.4526.10.15.1.1,BROADCOM-POWER-ETHERNET-MIB::agentPethPsePortTable,,not-accessible,,current,,A table of per-port information and configuration objects relating  to the power status of each port.
.1.3.6.1.4.1.4526.10.15.1.1.1,BROADCOM-POWER-ETHERNET-MIB::agentPethPsePortEntry,,not-accessible,,current,,A collection of objects providing additional power information  and control parameters for the specified port.
.1.3.6.1.4.1.4526.10.15.1.1.1.1,BROADCOM-POWER-ETHERNET-MIB::agentPethPowerLimit,Gauge32,read-write,,current,,The configured maximum power this port can provide to an  attached device measured in Milliwatts.
.1.3.6.1.4.1.4526.10.15.1.1.1.2,BROADCOM-POWER-ETHERNET-MIB::agentPethOutputPower,Gauge32,read-only,,current,,The power this port is supplying to an attached device measured  in Milliwatts.
.1.3.6.1.4.1.4526.10.15.1.1.1.3,BROADCOM-POWER-ETHERNET-MIB::agentPethOutputCurrent,Gauge32,read-only,,current,,The current this port is supplying to an attached device measured  in Milliamps.
.1.3.6.1.4.1.4526.10.15.1.1.1.4,BROADCOM-POWER-ETHERNET-MIB::agentPethOutputVolts,Gauge32,read-only,,current,,The voltage this port is supplying to an attached device measured  in millivolts.
.1.3.6.1.4.1.4526.10.15.1.1.1.5,BROADCOM-POWER-ETHERNET-MIB::agentPethTemperature,Gauge32,read-only,,current,,The temperature measured at this port of the PoE Controller. It is measured in degree celcius.
.1.3.6.1.4.1.4526.10.15.1.1.1.6,BROADCOM-POWER-ETHERNET-MIB::agentPethPowerLimitType,INTEGER,read-write,,current,dot3af(1):user(2):none(3),Describes or controls the maximum power that a port can deliver A value of dot3af(1) means that the port power limit is as per the dot3af class of the PD attached. A value of user(2) means that the port power limit is equal to the value  specified by agentPethPowerLimit
.1.3.6.1.4.1.4526.10.15.1.1.1.7,BROADCOM-POWER-ETHERNET-MIB::agentPethHighPowerEnable,INTEGER,read-write,,obsolete,true(1):false(2),true (1) The PSE port can deliver power up to 32Watts. false(2) The PSE port can deliver power up to 18Watts
.1.3.6.1.4.1.4526.10.15.1.1.1.8,BROADCOM-POWER-ETHERNET-MIB::agentPethPowerDetectionType,INTEGER,read-write,,current,none(0):legacy(1):fourPtdot3afonly(2):fourPtdot3afandlegacy(3):twoPtdot3afonly(4):twoPtdot3afandlegacy(5),Describes PD detection mechanism performed by the PSE port. A value of none(0) means no detection is done. A value of legacy(1) means only legacy capacitive detection scheme is used. A value of 4ptdot3afonly(2) means that IEEE 802.3af 4point detection scheme is used. A value of 4ptdot3afandlegacy(3)means that IEEE 802.3af 4point detection scheme is used and when that fails to detect a connected PD, legacity capacitive detection is used.  A value of 2ptdot3afonly(4) means that IEEE 802.3af 2point detection scheme is used. A value of 2ptdot3afandlegacy(5)means that IEEE 802.3af 2point detection scheme is used and when that fails to detect a connected PD, legacity capacitive detection is used.  The value 'none' can not be forcibly set by the administrator.
.1.3.6.1.4.1.4526.10.15.1.1.1.9,BROADCOM-POWER-ETHERNET-MIB::agentPethFaultStatus,INTEGER,read-only,,current,none(0):mpsAbsent(1):short(2):overload(3):powerDenied(4),Describes the error description when the pse port is in fault status. A value of none(0) specifies that the pse port is not in any error state. A value of mpsAbsent(1) specifies that the pse port has detected and absence of main power supply. A value of short(2) specifies that the pse port has detected a short circuit condition. A value of overload(3) specifies that the pd connected to the pse port had tried to draw more power than permissible by the hardware.  A value of powerDenied(4) specifies that the pse port has been denied power because of shortage of power or due to administrative action.
.1.3.6.1.4.1.4526.10.15.1.1.1.10,BROADCOM-POWER-ETHERNET-MIB::agentPethPortReset,INTEGER,read-write,,current,none(0):reset(1),A value of reset(1) is used to move the pse port dot3af state to idle. A read on this object will always return the value none(0). The value none(0) can not be forcibly set by the administrtor.
.1.3.6.1.4.1.4526.10.15.1.1.1.11,BROADCOM-POWER-ETHERNET-MIB::agentPethPowerUpMode,INTEGER,read-write,,current,ieee802dot3af(0):high-inrush(1):pre-802dot3at(2):ieee802dot3at(3),Describes the power up mode used by the PSE Port. A value of 802dot3af(0) means port is powered in IEEE 802.3af mode. A value of high-inrush(1) means port is powered used high-inrush current, used by legacy PD's A value of pre-802dot3at(2) means port is powered in IEEE 802.3af mode initially, switched to high-power IEEE 802.3at mode before 75msec. This mode needs to be used if PSE is NOT performing Layer 2 Classification Or PSE is performing 2-Event Layer 1 Classification. A value of 802dot3at(3) means is port is powered in IEEE 802.3at mode. i.e. if class detected by PSE is not class4 then PSE port will not power up the PD.
.1.3.6.1.4.1.4526.10.15.1.1.1.12,BROADCOM-POWER-ETHERNET-MIB::agentPethClassificationMode,INTEGER,read-write,,current,bypass(0):standard(1),Describes the classification mode used by the PSE Port. A value of bypass(0) means port is not performing classification. A value of standard(1) means port is performing classification as per IEEE 802.3af/802.3at .
.1.3.6.1.4.1.4526.10.15.1.2,BROADCOM-POWER-ETHERNET-MIB::agentPethMainPseObjects,,,,,,
.1.3.6.1.4.1.4526.10.15.1.2.1,BROADCOM-POWER-ETHERNET-MIB::agentPethMainPseTable,,not-accessible,,current,,A table of objects that display and control attributes of the main power source in a PSE device. Ethernet switches are one example of boxes that would support these objects. Values of all read-write objects in this table are persistent at restart/reboot.
.1.3.6.1.4.1.4526.10.15.1.2.1.1,BROADCOM-POWER-ETHERNET-MIB::agentPethMainPseEntry,,not-accessible,,current,,A set of objects that display and control the Main power of a PSE. 
.1.3.6.1.4.1.4526.10.15.1.2.1.1.1,BROADCOM-POWER-ETHERNET-MIB::agentPethMainPseLegacy,INTEGER,read-write,,current,true(1):false(2),Enable/Disable Legacy device detection. The value true(1) means legacy devices are detected; the value false(2) means legacy devices are not detected.
.1.3.6.1.4.1.4526.10.15.1.3,BROADCOM-POWER-ETHERNET-MIB::agentPethPseTable,,not-accessible,,current,,A table of per-unit information and configuration objects relating  to the power configurtion for the entire pse unit.
.1.3.6.1.4.1.4526.10.15.1.3.1,BROADCOM-POWER-ETHERNET-MIB::agentPethPseEntry,,not-accessible,,current,,A collection of objects providing additional power information  and control parameters for the specified pse unit.
.1.3.6.1.4.1.4526.10.15.1.3.1.1,BROADCOM-POWER-ETHERNET-MIB::agentPethPsePowerManagementMode,INTEGER,read-write,,current,static(1):dynamic(2),Describes or controls the power management algorithm used by the pse  to deliver power to the requesting PDsthat a pds.
.1.3.6.1.4.1.4526.10.15.1.3.1.2,BROADCOM-POWER-ETHERNET-MIB::agentPethPseAutoResetEnable,INTEGER,read-write,,current,true(1):false(2),true (1) The PSE port is reset with out administrator intervention whenver a  fault condition occurs. false(2) Administrator has to reset the pse port whenver a fault condition is detected.
.1.3.6.1.4.1.4526.10.17,FASTPATH-SNTP-CLIENT-MIB::agentSntpClientMIB,,,,,,This MIB module defines a portion of the SNMP MIB under the Netgear enterprise OID pertaining to SNTP client configuration and statistical collection.
.1.3.6.1.4.1.4526.10.17.1,FASTPATH-SNTP-CLIENT-MIB::agentSntpClientObjects,,,,,,
.1.3.6.1.4.1.4526.10.17.1.1,FASTPATH-SNTP-CLIENT-MIB::agentSntpClient,,,,,,
.1.3.6.1.4.1.4526.10.17.1.1.1,FASTPATH-SNTP-CLIENT-MIB::agentSntpClientVersion,INTEGER,read-only,,current,version1(1):version2(2):version3(3):version4(4),The highest SNTP version this client supports. Per RFC 2030, higher versions are required to be backwards compatible with all lower versions with the exception of version 0.
.1.3.6.1.4.1.4526.10.17.1.1.2,FASTPATH-SNTP-CLIENT-MIB::agentSntpClientSupportedMode,BITS,read-only,,current,disabled(0):unicast(1):broadcast(2):multicast(3),The SNTP client administrative modes that this device supports. A client may support more than one administrative mode.
.1.3.6.1.4.1.4526.10.17.1.1.3,FASTPATH-SNTP-CLIENT-MIB::agentSntpClientMode,INTEGER,read-write,,current,disabled(0):unicast(1):broadcast(2):multicast(3),The current administrative mode of the SNTP client. A SET of this object will cause the SNTP client to change administrative modes. A SET request MUST have only 1 bit set since is not possible to operate in multiple modes simultaneously. SETs of this object are limited to values supported by the device as specified by agentSntpClientSupportedMode.
.1.3.6.1.4.1.4526.10.17.1.1.4,FASTPATH-SNTP-CLIENT-MIB::agentSntpClientPort,Unsigned32,read-write,,current,,The local port number used to listen for broadcasts and responses from servers.
.1.3.6.1.4.1.4526.10.17.1.1.5,FASTPATH-SNTP-CLIENT-MIB::agentSntpClientLastUpdateTime,OCTET,read-only,,current,,The local date and time that the SNTP client last updated the system time on the device since agent reboot. This time is updated for all non-disabled administrative modes of the SNTP client. If the SNTP client has not updated the time then the client MUST return '00000000'H.
.1.3.6.1.4.1.4526.10.17.1.1.6,FASTPATH-SNTP-CLIENT-MIB::agentSntpClientLastAttemptTime,OCTET,read-only,,current,,The local date and time of the last SNTP request or unsolicited SNTP message for this SNTP client since agent reboot. This value is a timestamp for the agentSntpClientLastAttemptStatus object. When the agentSntpClientLastAttemptStatus has a value of success(2), this object's value should be equal to the value returned by agentSntpClientLastUpdateTime. If no SNTP frames have been processed by the SNTP client then the client MUST return '00000000'H. This object is updated for all non-disabled administrative modes of the SNTP client.
.1.3.6.1.4.1.4526.10.17.1.1.7,FASTPATH-SNTP-CLIENT-MIB::agentSntpClientLastAttemptStatus,INTEGER,read-only,,current,other(1):success(2):requestTimedOut(3):badDateEncoded(4):versionNotSupported(5):serverUnsychronized(6):serverKissOfDeath(7),The status of the last SNTP request or unsolicited SNTP message for this SNTP client since agent reboot. The status is updated for all non-disabled administrative modes of the SNTP client.
.1.3.6.1.4.1.4526.10.17.1.1.8,FASTPATH-SNTP-CLIENT-MIB::agentSntpClientServerAddressType,INTEGER,read-only,,current,unknown(0):ipv4(1):ipv6(2):ipv4z(3):ipv6z(4):dns(16),The address type of the SNTP server as identified by the last received packet. Support for all address types is NOT REQUIRED.
.1.3.6.1.4.1.4526.10.17.1.1.9,FASTPATH-SNTP-CLIENT-MIB::agentSntpClientServerAddress,OCTET,read-only,,current,,The encoded address of the SNTP server as identified by the last received packet.
.1.3.6.1.4.1.4526.10.17.1.1.10,FASTPATH-SNTP-CLIENT-MIB::agentSntpClientServerMode,Unsigned32,read-only,,current,,This is a 3-bit integer identifying the mode of the server as indicated in the last received packet with values defined as follows: Mode Meaning ------------------------------------ 0 reserved 1 symmetric active 2 symmetric passive 3 client 4 server 5 broadcast 6 reserved for NTP control message 7 reserved for private use 
.1.3.6.1.4.1.4526.10.17.1.1.11,FASTPATH-SNTP-CLIENT-MIB::agentSntpClientServerStratum,Unsigned32,read-only,,current,,This is an 8-bit integer identifying the stratum of the server as indicated in the last received packet with values defined as follows: Stratum Meaning ------------------------------------ 0 unspecified 1 primary reference 2-15 secondary reference 16-255 reserved
.1.3.6.1.4.1.4526.10.17.1.1.12,FASTPATH-SNTP-CLIENT-MIB::agentSntpClientServerRefClkId,OCTET,read-only,,current,,This is the value of the Reference Identifier in the last received packet defined as follows. Reference Identifier: This is a 32-bit bitstring identifying the particular reference source. In the case of NTP Version 3 or Version 4 stratum-0 (unspecified) or stratum-1 (primary) servers, this is a four-character ASCII string, left justified and zero padded to 32 bits. In NTP Version 3 secondary servers, this is the 32-bit IPv4 address of the reference source. In NTP Version 4 secondary servers, this is the low order 32 bits of the latest transmit timestamp of the reference source.
.1.3.6.1.4.1.4526.10.17.1.1.13,FASTPATH-SNTP-CLIENT-MIB::agentSntpClientPollInterval,Unsigned32,read-write,,current,,The minimum number of seconds between successive SNTP polls of the server in seconds as a power of two. This polling interval is used for SNTP requests in unicast(1) or broadcast(2) administrative mode.
.1.3.6.1.4.1.4526.10.17.1.2,FASTPATH-SNTP-CLIENT-MIB::agentSntpClientUnicast,,,,,,
.1.3.6.1.4.1.4526.10.17.1.2.1,FASTPATH-SNTP-CLIENT-MIB::agentSntpClientUnicastPollInterval,Unsigned32,read-write,,current,,The minimum number of seconds between successive SNTP polls of the server in seconds as a power of two. This polling interval is used for SNTP requests in unicast(1) administrative mode.
.1.3.6.1.4.1.4526.10.17.1.2.2,FASTPATH-SNTP-CLIENT-MIB::agentSntpClientUnicastPollTimeout,Unsigned32,read-write,,current,,The number of seconds to wait for a response from a SNTP server before considering the attempt to have 'timed out'. This timeout is used for SNTP requests in unicast(1) administrative mode.
.1.3.6.1.4.1.4526.10.17.1.2.3,FASTPATH-SNTP-CLIENT-MIB::agentSntpClientUnicastPollRetry,Unsigned32,read-write,,current,,The number of times to retry a request to the same SNTP server that has 'timed out.'. This retry count is used for directed SNTP requests in unicast(1) administrative mode. For example, assume this object has been SET to a value of 2. When the SNTP client queries a given server it will send 1 SNTP request frame. If that original attempt fails, the client will retry up to a maximum of 2 more times before declaring the unicast poll unsuccessful and attempting the next server.
.1.3.6.1.4.1.4526.10.17.1.2.4,FASTPATH-SNTP-CLIENT-MIB::agentSntpClientUcastServerMaxEntries,Unsigned32,read-only,,current,,The maximum number of server entries that are allowed in the agentSntpClientUcastServerTable.
.1.3.6.1.4.1.4526.10.17.1.2.5,FASTPATH-SNTP-CLIENT-MIB::agentSntpClientUcastServerCurrEntries,Gauge32,read-only,,current,,The current number of server entries in the agentSntpClientUcastServerTable.
.1.3.6.1.4.1.4526.10.17.1.2.6,FASTPATH-SNTP-CLIENT-MIB::agentSntpClientUcastServerTable,,not-accessible,,current,,A table containing configuration and statistical information for unicast SNTP servers. Each server entry is represented by single conceptual row in this table.
.1.3.6.1.4.1.4526.10.17.1.2.6.1,FASTPATH-SNTP-CLIENT-MIB::agentSntpClientUcastServerEntry,,not-accessible,agentSntpClientUcastServerIndex,current,,Information for a particular unicast SNTP server.
.1.3.6.1.4.1.4526.10.17.1.2.6.1.1,FASTPATH-SNTP-CLIENT-MIB::agentSntpClientUcastServerIndex,Unsigned32,not-accessible,,current,,This object uniquely identifies the entry in the table.
.1.3.6.1.4.1.4526.10.17.1.2.6.1.2,FASTPATH-SNTP-CLIENT-MIB::agentSntpClientUcastServerAddressType,INTEGER,read-create,,current,unknown(0):ipv4(1):ipv6(2):ipv4z(3):ipv6z(4):dns(16),This object specifies how agentSntpClientUcastServerAddr is encoded. Support for all possible enumerations defined by InetAddressType is NOT REQUIRED.
.1.3.6.1.4.1.4526.10.17.1.2.6.1.3,FASTPATH-SNTP-CLIENT-MIB::agentSntpClientUcastServerAddress,OCTET,read-create,,current,,The encoded internet address of an SNTP server. Unicast SNTP requests will be sent to this address. If this address is a DNS hostname, then that hostname SHOULD be resolved into an IP address each time a SNTP request is sent to it.
.1.3.6.1.4.1.4526.10.17.1.2.6.1.4,FASTPATH-SNTP-CLIENT-MIB::agentSntpClientUcastServerPort,Unsigned32,read-create,,current,,The port number on the server to which poll requests are sent. A set request MUST NOT use a value of 0 for this object.
.1.3.6.1.4.1.4526.10.17.1.2.6.1.5,FASTPATH-SNTP-CLIENT-MIB::agentSntpClientUcastServerVersion,INTEGER,read-create,,current,version1(1):version2(2):version3(3):version4(4),The SNTP version this server supports. This is the value that will be encoded in NTP polls when operating in unicast(1) administrative mode.
.1.3.6.1.4.1.4526.10.17.1.2.6.1.6,FASTPATH-SNTP-CLIENT-MIB::agentSntpClientUcastServerPrecedence,Unsigned32,read-create,,current,,The precedence that this server has in relation to its peers in the determining the sequence of servers to which SNTP requests will be sent. The client continues sending requests to different servers until a successful response is received or all servers are exhausted. This object indicates the order in which to query the servers. A server entry with a precedence of 1 will be queried before a server with a precedence of 2, and so forth. If more than one server has the same precedence then the request order will follow the lexicographical ordering of the entries in this table.
.1.3.6.1.4.1.4526.10.17.1.2.6.1.7,FASTPATH-SNTP-CLIENT-MIB::agentSntpClientUcastServerLastUpdateTime,OCTET,read-only,,current,,The local date and time that the response from this server was used to update the system time on the device since agent reboot. If the SNTP client has not updated the time using a response from this server then this object MUST return '00000000'H.
.1.3.6.1.4.1.4526.10.17.1.2.6.1.8,FASTPATH-SNTP-CLIENT-MIB::agentSntpClientUcastServerLastAttemptTime,OCTET,read-only,,current,,The local date and time that this SNTP server was last queried since agent reboot. Essentially, this value is a timestamp for the agentSntpClientUcastServerLastAttemptStatus object. If this server has not been queried then this object MUST return '00000000'H.
.1.3.6.1.4.1.4526.10.17.1.2.6.1.9,FASTPATH-SNTP-CLIENT-MIB::agentSntpClientUcastServerLastAttemptStatus,INTEGER,read-only,,current,other(1):success(2):requestTimedOut(3):badDateEncoded(4):versionNotSupported(5):serverUnsychronized(6):serverKissOfDeath(7),The status of the last SNTP request to this server since agent reboot. If no requests have been made then this object should return 'other'.
.1.3.6.1.4.1.4526.10.17.1.2.6.1.10,FASTPATH-SNTP-CLIENT-MIB::agentSntpClientUcastServerNumRequests,Counter32,read-only,,current,,The number of SNTP requests made to this server since the last agent reboot. This includes retry attempts to the server.
.1.3.6.1.4.1.4526.10.17.1.2.6.1.11,FASTPATH-SNTP-CLIENT-MIB::agentSntpClientUcastServerNumFailedRequests,Counter32,read-only,,current,,The number of SNTP requests made to this server that did not result in a successful response since the last agent reboot. This includes retry attempts to the server.
.1.3.6.1.4.1.4526.10.17.1.2.6.1.12,FASTPATH-SNTP-CLIENT-MIB::agentSntpClientUcastServerRowStatus,INTEGER,read-create,,current,active(1):notInService(2):notReady(3):createAndGo(4):createAndWait(5):destroy(6),The row status of this conceptual row in the table. active - The server is available for use in SNTP client operations. Other writable leaves in this table MAY be modified while the row is in the active state. notInService - The entry is fully configured but is not available for use in SNTP client operations. The agent MAY transition a row from the active to notInService upon receipt of a kiss of death packet from the server. createAndGo - This is the preferred mechanism for creating conceptual rows in this table. This value can never be read as the row will always transition immediately to either active or notInService. destroy - This will remove the conceptual row from the table and make it unavailable for SNTP client operations. 
.1.3.6.1.4.1.4526.10.17.1.3,FASTPATH-SNTP-CLIENT-MIB::agentSntpClientBroadcast,,,,,,
.1.3.6.1.4.1.4526.10.17.1.3.1,FASTPATH-SNTP-CLIENT-MIB::agentSntpClientBroadcastCount,Counter32,read-only,,current,,The number of unsolicited broadcast SNTP messages that have been received and processed by the SNTP client. Unsolicited SNTP broadcast frames will not be counted unless the SNTP agent is operating in broadcast(3) mode, as specified by agentSntpClientMode.
.1.3.6.1.4.1.4526.10.17.1.3.2,FASTPATH-SNTP-CLIENT-MIB::agentSntpClientBroadcastInterval,Unsigned32,read-write,,current,,The number of seconds the client will wait before processing another broadcast packet expressed as a power of two. Packets received during the wait interval are silently discarded.
.1.3.6.1.4.1.4526.10.17.2,FASTPATH-SNTP-CLIENT-MIB::agentSntpClientConformance,,,,,,
.1.3.6.1.4.1.4526.10.17.2.1,FASTPATH-SNTP-CLIENT-MIB::agentSntpClientGroups,,,,,,
.1.3.6.1.4.1.4526.10.17.2.1.1,FASTPATH-SNTP-CLIENT-MIB::agentSntpClientDeviceGroup,,,,,,A collection of objects providing device level control of an SNTP client on FASTPATH enabled devices.
.1.3.6.1.4.1.4526.10.17.2.1.2,FASTPATH-SNTP-CLIENT-MIB::agentSntpClientUnicastGroup,,,,,,A collection of objects providing control and statistics for an SNTP client capable of operating in unicast mode.
.1.3.6.1.4.1.4526.10.17.2.1.3,FASTPATH-SNTP-CLIENT-MIB::agentSntpClientBroadcastGroup,,,,,,A collection of objects providing control and statistics for an SNTP client capable of operating in broadcast mode.
.1.3.6.1.4.1.4526.10.17.2.2,FASTPATH-SNTP-CLIENT-MIB::agentSntpClientCompliances,,,,,,
.1.3.6.1.4.1.4526.10.17.2.2.1,FASTPATH-SNTP-CLIENT-MIB::agentSntpClientCompliance,,,,,,The compliance statement for devices that support agentSntpClient.
.1.3.6.1.4.1.4526.10.19,FASTPATH-OUTBOUNDTELNET-PRIVATE-MIB::fastPathOutboundTelnetPrivate,,,,,,The NETGEAR Private MIB for FASTPATH Outbound Telnet
.1.3.6.1.4.1.4526.10.19.1,FASTPATH-OUTBOUNDTELNET-PRIVATE-MIB::agentOutboundTelnetGroup,,,,,,
.1.3.6.1.4.1.4526.10.19.1.1,FASTPATH-OUTBOUNDTELNET-PRIVATE-MIB::agentOutboundTelnetAdminMode,INTEGER,read-write,,current,enable(1):disable(2), Admin-mode of the Outbound Telnet.
.1.3.6.1.4.1.4526.10.19.1.2,FASTPATH-OUTBOUNDTELNET-PRIVATE-MIB::agentOutboundTelnetMaxNoOfSessions,INTEGER,read-write,,current,, The maximum no. of Outbound Telnet sessions allowed.
.1.3.6.1.4.1.4526.10.19.1.3,FASTPATH-OUTBOUNDTELNET-PRIVATE-MIB::agentOutboundTelnetTimeout,INTEGER,read-write,,current,, The login inactivity timeout value for Outbound Telnet.
.1.3.6.1.4.1.4526.10.20,FASTPATH-PORTSECURITY-PRIVATE-MIB::fastPathPortSecurity,,,,,,The Netgear Private MIB for FASTPATH Port Security Feature.
.1.3.6.1.4.1.4526.10.20.1,FASTPATH-PORTSECURITY-PRIVATE-MIB::agentPortSecurityGroup,,,,,,
.1.3.6.1.4.1.4526.10.20.1.1,FASTPATH-PORTSECURITY-PRIVATE-MIB::agentGlobalPortSecurityMode,INTEGER,read-write,,current,enable(1):disable(2),Mode showing whether at the global level, port security is enabled or not.
.1.3.6.1.4.1.4526.10.20.1.2,FASTPATH-PORTSECURITY-PRIVATE-MIB::agentPortSecurityTable,,not-accessible,,current,,A table for Port Security and associated functionality.
.1.3.6.1.4.1.4526.10.20.1.2.1,FASTPATH-PORTSECURITY-PRIVATE-MIB::agentPortSecurityEntry,,not-accessible,ifIndex,current,,Represents entry for port security table
.1.3.6.1.4.1.4526.10.20.1.2.1.1,FASTPATH-PORTSECURITY-PRIVATE-MIB::agentPortSecurityMode,INTEGER,read-write,,current,enable(1):disable(2),Mode showing whether at port level security is enabled or not.
.1.3.6.1.4.1.4526.10.20.1.2.1.2,FASTPATH-PORTSECURITY-PRIVATE-MIB::agentPortSecurityDynamicLimit,Unsigned32,read-write,,current,,This variable signifies the limit of dynamically locked MAC addresses  allowed on a specific port.
.1.3.6.1.4.1.4526.10.20.1.2.1.3,FASTPATH-PORTSECURITY-PRIVATE-MIB::agentPortSecurityStaticLimit,Unsigned32,read-write,,current,,This variable signifies the limit of statically locked MAC addresses  allowed on a specific port.
.1.3.6.1.4.1.4526.10.20.1.2.1.4,FASTPATH-PORTSECURITY-PRIVATE-MIB::agentPortSecurityViolationTrapMode,INTEGER,read-write,,current,enable(1):disable(2),This variable is used to enable or disable the sending of new violation  traps designating when a packet with a disallowed MAC address is  received on a locked port.
.1.3.6.1.4.1.4526.10.20.1.2.1.6,FASTPATH-PORTSECURITY-PRIVATE-MIB::agentPortSecurityStaticMACs,OCTET,read-only,,current,,This variable displays the statically locked MAC addresses for port. The list displayed in a particular fashion : 2 a0:b1:c2:d1:e3:a1,11 a0:b1:c2:d3:e4:f5  (i.e., VLAN MAC pairs separated by commas).
.1.3.6.1.4.1.4526.10.20.1.2.1.7,FASTPATH-PORTSECURITY-PRIVATE-MIB::agentPortSecurityLastDiscardedMAC,OCTET,read-only,,current,,This variable displays the vlan-id and source MAC address of the last packet that was discarded on a locked port.
.1.3.6.1.4.1.4526.10.20.1.2.1.8,FASTPATH-PORTSECURITY-PRIVATE-MIB::agentPortSecurityMACAddressAdd,OCTET,read-write,,current,,This MIB variable accepts a VLAN id and MAC address to be added to the list of statically locked MAC addresses on a port. The VLAN id and MAC address combination  would be entered in a particular fashion like :- 2 a0:b0:c0:d1:e2:a1(the vlan-id and MAC address separated by a blank-space).
.1.3.6.1.4.1.4526.10.20.1.2.1.9,FASTPATH-PORTSECURITY-PRIVATE-MIB::agentPortSecurityMACAddressRemove,OCTET,read-write,,current,,This MIB variable accepts a VLAN id and MAC address to be removed from the list of statically locked MAC addresses on a port.. The VLAN id and MAC address combination  would be entered in a particular fashion like :- 2 a0:b0:c0:d1:e2:a1(the vlan-id and MAC address separated by a blank-space).
.1.3.6.1.4.1.4526.10.20.1.2.1.10,FASTPATH-PORTSECURITY-PRIVATE-MIB::agentPortSecurityMACAddressMove,INTEGER,read-write,,current,enable(1):disable(2),When this object is enabled, all the dynamically locked MAC addresses will be moved to statically locked addresses on a port. GET operation on this object will display  disable.
.1.3.6.1.4.1.4526.10.20.1.3,FASTPATH-PORTSECURITY-PRIVATE-MIB::agentPortSecurityDynamicTable,,not-accessible,,current,,A table for Port Security Dynamic and associated functionality.
.1.3.6.1.4.1.4526.10.20.1.3.1,FASTPATH-PORTSECURITY-PRIVATE-MIB::agentPortSecurityDynamicEntry,,not-accessible,ifIndex:agentPortSecurityDynamicVLANId:agentPortSecurityDynamicMACAddress,current,,Represents entry for port MAC Locking table
.1.3.6.1.4.1.4526.10.20.1.3.1.1,FASTPATH-PORTSECURITY-PRIVATE-MIB::agentPortSecurityDynamicVLANId,Unsigned32,read-only,,current,,Source VLAN id of the packet that is received on the dynamically locked port.
.1.3.6.1.4.1.4526.10.20.1.3.1.2,FASTPATH-PORTSECURITY-PRIVATE-MIB::agentPortSecurityDynamicMACAddress,OCTET,read-only,,current,,Source MAC address of the packet that is received on the dynamically locked port.
.1.3.6.1.4.1.4526.10.20.2,FASTPATH-PORTSECURITY-PRIVATE-MIB::agentPortSecurityTraps,,,,,,
.1.3.6.1.4.1.4526.10.20.2.1,FASTPATH-PORTSECURITY-PRIVATE-MIB::agentPortSecurityViolation,,,,,,Sent when a packet is received on a locked port with a source MAC address  that is not allowed.
.1.3.6.1.4.1.4526.10.22,FASTPATH-LOOPBACK-MIB::fastPathLoopback,,,,,,The NETGEAR Private MIB for FastPath Loopback
.1.3.6.1.4.1.4526.10.22.1,FASTPATH-LOOPBACK-MIB::agentLoopbackGroup,,,,,,
.1.3.6.1.4.1.4526.10.22.1.1,FASTPATH-LOOPBACK-MIB::agentLoopbackTable,,not-accessible,,current,,A summary table of the Loopback instances
.1.3.6.1.4.1.4526.10.22.1.1.1,FASTPATH-LOOPBACK-MIB::agentLoopbackEntry,,not-accessible,agentLoopbackID,current,,
.1.3.6.1.4.1.4526.10.22.1.1.1.1,FASTPATH-LOOPBACK-MIB::agentLoopbackID,Integer32,not-accessible,,current,,The Loopback ID is associated with Internal Interface number which will be generated when we create a loopback.
.1.3.6.1.4.1.4526.10.22.1.1.1.2,FASTPATH-LOOPBACK-MIB::agentLoopbackIfIndex,Integer32,read-only,,current,,This is external interface associated with inetrnal interface of loopback. The Loopback ID is associated with Internal Interface number which will be generated when we create a loopback.
.1.3.6.1.4.1.4526.10.22.1.1.1.3,FASTPATH-LOOPBACK-MIB::agentLoopbackIPAddress,OCTET,read-write,,current,,The IP Address configured for the respective loopback
.1.3.6.1.4.1.4526.10.22.1.1.1.4,FASTPATH-LOOPBACK-MIB::agentLoopbackIPSubnet,OCTET,read-write,,current,,The Subnet mask configured for the respective loopback
.1.3.6.1.4.1.4526.10.22.1.1.1.5,FASTPATH-LOOPBACK-MIB::agentLoopbackStatus,INTEGER,read-create,,current,active(1):notInService(2):notReady(3):createAndGo(4):createAndWait(5):destroy(6),Status of this instance. The rows can be added/deleted in the table by setting createAndGo/destroy respectively active(1) - this loopback instance is active createAndGo(4) - set to this value to create an instance destroy(6) - set to this value to delete an instance
.1.3.6.1.4.1.4526.10.23,FASTPATH-IPV6-LOOPBACK-MIB::fastPathIpv6Loopback,,,,,,The NETGEAR Private MIB for FastPath Loopback IPV6 address configuration
.1.3.6.1.4.1.4526.10.23.1,FASTPATH-IPV6-LOOPBACK-MIB::agentLoopbackIpv6Group,,,,,,
.1.3.6.1.4.1.4526.10.23.1.1,FASTPATH-IPV6-LOOPBACK-MIB::agentLoopbackIpv6PrefixTable,,not-accessible,,current,,A table of the Ipv6 prefixes associated with loopback instances
.1.3.6.1.4.1.4526.10.23.1.1.1,FASTPATH-IPV6-LOOPBACK-MIB::agentLoopbackIpv6PrefixEntry,,not-accessible,agentLoopbackID:agentLoopbackIpv6PrefixPrefix:agentLoopbackIpv6PrefixPrefixLen,current,,
.1.3.6.1.4.1.4526.10.23.1.1.1.1,FASTPATH-IPV6-LOOPBACK-MIB::agentLoopbackIpv6PrefixPrefix,OCTET,not-accessible,,current,,The prefix associated with the loopback interface. The data type is used to model the Ipv6 address. It is a binary string of 16 octects in network byte-order. It specifies the IP  address of loopback which will be in Ipv6 Format, generated using internal interface number.
.1.3.6.1.4.1.4526.10.23.1.1.1.2,FASTPATH-IPV6-LOOPBACK-MIB::agentLoopbackIpv6PrefixPrefixLen,Unsigned32,not-accessible,,current,,The length of the prefix (in bits).
.1.3.6.1.4.1.4526.10.23.1.1.1.3,FASTPATH-IPV6-LOOPBACK-MIB::agentLoopbackIpv6PrefixStatus,INTEGER,read-create,,current,active(1):notInService(2):notReady(3):createAndGo(4):createAndWait(5):destroy(6),Status of this instance.Row can be added or deleted by setting the value to createAndGo/destroy  active(1) - this Loopback instance is active createAndGo(4) - set to this value to create an instance destroy(6) - set to this value to delete an instance
.1.3.6.1.4.1.4526.10.24,FASTPATH-KEYING-PRIVATE-MIB::fastPathKeyingPrivate,,,,,,The NETGEAR Private MIB for FASTPATH Keying Utility
.1.3.6.1.4.1.4526.10.24.1,FASTPATH-KEYING-PRIVATE-MIB::agentFeatureKeyingGroup,,,,,,
.1.3.6.1.4.1.4526.10.24.1.1,FASTPATH-KEYING-PRIVATE-MIB::agentFeatureKeyingEnableKey,OCTET,read-write,,current,,Hexadecimal Key-string entered to enable an advance functionality.
.1.3.6.1.4.1.4526.10.24.1.2,FASTPATH-KEYING-PRIVATE-MIB::agentFeatureKeyingDisableKey,OCTET,read-write,,current,,Hexadecimal Key-string entered to disable an advance functionality.
.1.3.6.1.4.1.4526.10.24.1.3,FASTPATH-KEYING-PRIVATE-MIB::agentFeatureKeyingTable,,not-accessible,,current,,A table for license key and associated functionality. 
.1.3.6.1.4.1.4526.10.24.1.3.1,FASTPATH-KEYING-PRIVATE-MIB::agentFeatureKeyingEntry,,not-accessible,agentFeatureKeyingIndex,current,,Represents entry for key table
.1.3.6.1.4.1.4526.10.24.1.3.1.1,FASTPATH-KEYING-PRIVATE-MIB::agentFeatureKeyingIndex,Unsigned32,not-accessible,,current,,A value corresponding to a keyable feature.When this table is walked, only values associated with keyable features are returned.This value  must be equivalent to valid value of agentFeatureKeyingIndex.
.1.3.6.1.4.1.4526.10.24.1.3.1.2,FASTPATH-KEYING-PRIVATE-MIB::agentFeatureKeyingName,OCTET,read-only,,current,,The abbreviated name of this component.This is also equivalent to  agentFeatureKeyingName
.1.3.6.1.4.1.4526.10.24.1.3.1.3,FASTPATH-KEYING-PRIVATE-MIB::agentFeatureKeyingStatus,INTEGER,read-only,,current,enable(1):disable(2),Returns a value of (1) if the feature is enabled for management, (2) if disabled.
.1.3.6.1.4.1.4526.10.25,FASTPATH-DHCP6SERVER-PRIVATE-MIB::fastPathDHCP6ServerPrivate,,,,,,The NETGEAR Private MIB for FASTPATH DHCPv6 Server/Relay
.1.3.6.1.4.1.4526.10.25.1,FASTPATH-DHCP6SERVER-PRIVATE-MIB::agentDhcp6ServerGroup,,,,,,
.1.3.6.1.4.1.4526.10.25.1.1,FASTPATH-DHCP6SERVER-PRIVATE-MIB::agentDhcp6ServerAdminMode,INTEGER,read-write,,current,enable(1):disable(2), Admin-mode of the DHCPv6 Server/Relay.
.1.3.6.1.4.1.4526.10.25.1.2,FASTPATH-DHCP6SERVER-PRIVATE-MIB::agentDhcp6ServerRelayOptParm,Integer32,read-write,,current,, The numeric value for the Relay Agent Information Option to be used by DHCPv6  Server/Relay.
.1.3.6.1.4.1.4526.10.25.1.3,FASTPATH-DHCP6SERVER-PRIVATE-MIB::agentDhcp6ServerRelayOptRemoteIdSuboptParm,Integer32,read-write,,current,, The numeric value for the Relay Agent Information Option Remote-ID Sub-option to  be used by DHCPv6 Server/Relay.
.1.3.6.1.4.1.4526.10.25.1.4,FASTPATH-DHCP6SERVER-PRIVATE-MIB::agentDhcp6ServerDuid,OCTET,read-only,,current,, The DHCPv6 Server unique DUID. This value cannot be modified
.1.3.6.1.4.1.4526.10.25.1.5,FASTPATH-DHCP6SERVER-PRIVATE-MIB::agentDhcp6ServerMalformedMessagesReceived,Counter32,read-only,,current,, The no. of malformed(truncated or corrupt) messages that have been received by the  DHCPv6 server.
.1.3.6.1.4.1.4526.10.25.1.6,FASTPATH-DHCP6SERVER-PRIVATE-MIB::agentDhcp6ServerDiscardedMessages,Counter32,read-only,,current,, The no. of discarded messages that have been received by the DHCPv6 server.
.1.3.6.1.4.1.4526.10.25.1.7,FASTPATH-DHCP6SERVER-PRIVATE-MIB::agentDhcp6ServerSOLICITMessagesReceived,Counter32,read-only,,current,, The no. of DHCPv6 messages of type SOLICIT that have been received by the DHCPv6  server.
.1.3.6.1.4.1.4526.10.25.1.8,FASTPATH-DHCP6SERVER-PRIVATE-MIB::agentDhcp6ServerREQUESTMessagesReceived,Counter32,read-only,,current,, The no. of DHCPv6 messages of type REQUEST that have been received by the DHCPv6  server.
.1.3.6.1.4.1.4526.10.25.1.9,FASTPATH-DHCP6SERVER-PRIVATE-MIB::agentDhcp6ServerCONFIRMMessagesReceived,Counter32,read-only,,current,, The no. of DHCPv6 messages of type CONFIRM that have been received by the DHCPv6  server.
.1.3.6.1.4.1.4526.10.25.1.10,FASTPATH-DHCP6SERVER-PRIVATE-MIB::agentDhcp6ServerRENEWMessagesReceived,Counter32,read-only,,current,, The no. of DHCPv6 messages of type RENEW that have been received by the DHCPv6  server.
.1.3.6.1.4.1.4526.10.25.1.11,FASTPATH-DHCP6SERVER-PRIVATE-MIB::agentDhcp6ServerREBINDMessagesReceived,Counter32,read-only,,current,, The no. of DHCPv6 messages of type REBIND that have been received by the DHCPv6  server.
.1.3.6.1.4.1.4526.10.25.1.12,FASTPATH-DHCP6SERVER-PRIVATE-MIB::agentDhcp6ServerRELEASEMessagesReceived,Counter32,read-only,,current,, The no. of DHCPv6 messages of type RELEASE that have been received by the DHCPv6  server.
.1.3.6.1.4.1.4526.10.25.1.13,FASTPATH-DHCP6SERVER-PRIVATE-MIB::agentDhcp6ServerDECLINEMessagesReceived,Counter32,read-only,,current,, The no. of DHCPv6 messages of type DECLINE that have been received by the DHCPv6  server.
.1.3.6.1.4.1.4526.10.25.1.14,FASTPATH-DHCP6SERVER-PRIVATE-MIB::agentDhcp6ServerINFORMREQMessagesReceived,Counter32,read-only,,current,, The no. of DHCPv6 messages of type INFORMATION-REQUEST that have been received by  the DHCPv6 server.
.1.3.6.1.4.1.4526.10.25.1.15,FASTPATH-DHCP6SERVER-PRIVATE-MIB::agentDhcp6ServerRELAYREPLYMessagesReceived,Counter32,read-only,,current,, The no. of DHCPv6 messages of type RELAY-REPLY that have been received by the  DHCPv6 server.
.1.3.6.1.4.1.4526.10.25.1.16,FASTPATH-DHCP6SERVER-PRIVATE-MIB::agentDhcp6ServerRELAYFORWMessagesReceived,Counter32,read-only,,current,, The no. of DHCPv6 messages of type RELAY-FORWARD that have been received by the  DHCPv6 server.
.1.3.6.1.4.1.4526.10.25.1.17,FASTPATH-DHCP6SERVER-PRIVATE-MIB::agentDhcp6ServerADVERTISEMessagesSent,Counter32,read-only,,current,, The no. of DHCPv6 messages of type ADVERTISE that have been sent by the DHCPv6  server.
.1.3.6.1.4.1.4526.10.25.1.18,FASTPATH-DHCP6SERVER-PRIVATE-MIB::agentDhcp6ServerREPLYMessagesSent,Counter32,read-only,,current,, The no. of DHCPv6 messages of type REPLY that have been sent by the DHCPv6 server.
.1.3.6.1.4.1.4526.10.25.1.19,FASTPATH-DHCP6SERVER-PRIVATE-MIB::agentDhcp6ServerRECONFIGUREMessagesSent,Counter32,read-only,,current,, The no. of DHCPv6 messages of type RECONFIGURE that have been sent by the DHCPv6  server.
.1.3.6.1.4.1.4526.10.25.1.20,FASTPATH-DHCP6SERVER-PRIVATE-MIB::agentDhcp6ServerRELAYREPLYMessagesSent,Counter32,read-only,,current,, The no. of DHCPv6 messages of type RELAY-REPLY that have been sent by the DHCPv6  server.
.1.3.6.1.4.1.4526.10.25.1.21,FASTPATH-DHCP6SERVER-PRIVATE-MIB::agentDhcp6ServerRELAYFORWMessagesSent,Counter32,read-only,,current,, The no. of DHCPv6 messages of type RELAY-FORWARD that have been sent by the DHCPv6  server.
.1.3.6.1.4.1.4526.10.25.1.22,FASTPATH-DHCP6SERVER-PRIVATE-MIB::agentDhcp6ServerClearStatistics,INTEGER,read-write,,current,enable(1):disable(2), Clears the DHCPv6 server statistics.
.1.3.6.1.4.1.4526.10.25.2,FASTPATH-DHCP6SERVER-PRIVATE-MIB::agentDhcp6ServerPoolConfigGroup,,,,,,
.1.3.6.1.4.1.4526.10.25.2.1,FASTPATH-DHCP6SERVER-PRIVATE-MIB::agentDhcp6ServerPoolNameCreate,OCTET,read-write,,current,,A pool is created by applying write operation on this MIB object and providing a new pool-name. Get operation on this MIB object returns a null-value, as for the purpose of viewing the pool name, the user should perform the traversal of agentDhcp6ServerPoolConfigTable. For this reason the get operation on object agentDhcp6ServerPoolNameCreate becomes insignificant.
.1.3.6.1.4.1.4526.10.25.2.2,FASTPATH-DHCP6SERVER-PRIVATE-MIB::agentDhcp6ServerPoolConfigTable,,not-accessible,,current,,A table of the DHCPv6 Server Pool configuration entries.
.1.3.6.1.4.1.4526.10.25.2.2.1,FASTPATH-DHCP6SERVER-PRIVATE-MIB::agentDhcp6ServerPoolConfigEntry,,not-accessible,agentDhcp6ServerPoolIndex,current,,Represents entry for a DHCPv6 server pool.
.1.3.6.1.4.1.4526.10.25.2.2.1.1,FASTPATH-DHCP6SERVER-PRIVATE-MIB::agentDhcp6ServerPoolIndex,Unsigned32,read-only,,current,,The Pool Index, which 'll be used as index for the PoolConfig Table.
.1.3.6.1.4.1.4526.10.25.2.2.1.2,FASTPATH-DHCP6SERVER-PRIVATE-MIB::agentDhcp6ServerPoolName,OCTET,read-only,,current,,The name of the DHCPv6 pool. This value cannot be modified
.1.3.6.1.4.1.4526.10.25.2.2.1.3,FASTPATH-DHCP6SERVER-PRIVATE-MIB::agentDhcp6ServerPoolType,INTEGER,read-only,,current,un-allocated(0):dynamic(1):manual(2),This specifies the type of the binding that is associated with this pool.
.1.3.6.1.4.1.4526.10.25.2.2.1.4,FASTPATH-DHCP6SERVER-PRIVATE-MIB::agentDhcp6ServerPoolDnsDomainCreate,OCTET,read-write,,current,,A DNS domain for a pool is created by applying write operation on this MIB object and providing a new DNS domain name. Get operation on this MIB object returns a null-value, as for the purpose of viewing the DNS domain name, the user should perform the traversal of agentDhcp6ServerPoolDnsDomainTable. For this reason the get operation on object agentDhcp6ServerDnsDomainCreate becomes insignificant.
.1.3.6.1.4.1.4526.10.25.2.2.1.5,FASTPATH-DHCP6SERVER-PRIVATE-MIB::agentDhcp6ServerPoolDnsServerCreate,OCTET,read-write,,current,,A DNS server for a pool is created by applying write operation on this MIB object and providing a new DNS server address. Get operation on this MIB object returns a null-value, as for the purpose of viewing the DNS server address, the user should perform the traversal of agentDhcp6ServerPoolDnsServerTable. For this reason the get operation on object agentDhcp6ServerDnsServerCreate becomes insignificant.
.1.3.6.1.4.1.4526.10.25.2.2.1.6,FASTPATH-DHCP6SERVER-PRIVATE-MIB::agentDhcp6ServerPoolRowStatus,INTEGER,read-write,,current,active(1):notInService(2):notReady(3):createAndGo(4):createAndWait(5):destroy(6),The row status variable is used according to installation and removal conventions for conceptual rows. When a pool is created by applying write operation on 'agentDhcp6ServerPoolCreateName',row-status becomes 'active'. If  row-status for a poolEntry is set to 'destroy', the corresponding pool gets deleted. 
.1.3.6.1.4.1.4526.10.25.2.4,FASTPATH-DHCP6SERVER-PRIVATE-MIB::agentDhcp6ServerPoolDnsDomainTable,,not-accessible,,current,,A table of the DHCPv6 Server Pool's DNS domain entries.
.1.3.6.1.4.1.4526.10.25.2.4.1,FASTPATH-DHCP6SERVER-PRIVATE-MIB::agentDhcp6ServerPoolDnsDomainEntry,,not-accessible,agentDhcp6ServerPoolIndex:agentDhcp6ServerPoolDnsDomainIndex,current,,Represents entry for a DHCPv6 server pool's DNS domains.
.1.3.6.1.4.1.4526.10.25.2.4.1.1,FASTPATH-DHCP6SERVER-PRIVATE-MIB::agentDhcp6ServerPoolDnsDomainIndex,Unsigned32,read-only,,current,,The DNS Domain Index, which will be used as index for the DnsDomain Table.
.1.3.6.1.4.1.4526.10.25.2.4.1.2,FASTPATH-DHCP6SERVER-PRIVATE-MIB::agentDhcp6ServerPoolDnsDomainName,OCTET,read-only,,current,,This specifies a DNS domain name for distribution to a DHCPv6 client.
.1.3.6.1.4.1.4526.10.25.2.4.1.3,FASTPATH-DHCP6SERVER-PRIVATE-MIB::agentDhcp6ServerPoolDnsDomainRowStatus,INTEGER,read-write,,current,active(1):notInService(2):notReady(3):createAndGo(4):createAndWait(5):destroy(6),The row status variable is used according to installation and removal conventions for conceptual rows. When a DNS domain is created by applying  write operation on 'agentDhcp6ServerDnsDomainCreate', row-status becomes 'active'.  If row-status for a DnsDomainEntry is set to 'destroy', the corresponding DNS domain  gets deleted. 
.1.3.6.1.4.1.4526.10.25.2.6,FASTPATH-DHCP6SERVER-PRIVATE-MIB::agentDhcp6ServerPoolDnsServerTable,,not-accessible,,current,,A table of the DHCPv6 Server Pool's DNS server address entries.
.1.3.6.1.4.1.4526.10.25.2.6.1,FASTPATH-DHCP6SERVER-PRIVATE-MIB::agentDhcp6ServerPoolDnsServerEntry,,not-accessible,agentDhcp6ServerPoolIndex:agentDhcp6ServerPoolDnsServerIndex,current,,Represents entry for a DHCPv6 server pool's DNS server addresses.
.1.3.6.1.4.1.4526.10.25.2.6.1.1,FASTPATH-DHCP6SERVER-PRIVATE-MIB::agentDhcp6ServerPoolDnsServerIndex,Unsigned32,read-only,,current,,The DNS Server Index, which will be used as index for the DNS Server Table.
.1.3.6.1.4.1.4526.10.25.2.6.1.2,FASTPATH-DHCP6SERVER-PRIVATE-MIB::agentDhcp6ServerPoolDnsServerAddress,OCTET,read-only,,current,,This specifies a DNS server address for distribution to a DHCPv6 client.
.1.3.6.1.4.1.4526.10.25.2.6.1.3,FASTPATH-DHCP6SERVER-PRIVATE-MIB::agentDhcp6ServerPoolDnsServerRowStatus,INTEGER,read-write,,current,active(1):notInService(2):notReady(3):createAndGo(4):createAndWait(5):destroy(6),The row status variable is used according to installation and removal conventions for conceptual rows. When a DNS server is created by applying  write operation on 'agentDhcp6ServerDnsServerCreate', row-status becomes 'active'.  If row-status for a DnsServerEntry is set to 'destroy', the corresponding DNS server  gets deleted. 
.1.3.6.1.4.1.4526.10.25.2.7,FASTPATH-DHCP6SERVER-PRIVATE-MIB::agentDhcp6ServerPoolAllocationTable,,not-accessible,,current,,A table of the DHCPv6 Server pool's allocation entries, showing prefix  delegation specific parameters.
.1.3.6.1.4.1.4526.10.25.2.7.1,FASTPATH-DHCP6SERVER-PRIVATE-MIB::agentDhcp6ServerPoolAllocationEntry,,not-accessible,agentDhcp6ServerPoolIndex:agentDhcp6ServerPoolAllocationIndex,current,,Represents entry for a DHCPv6 server pool's prefix delegation  information.
.1.3.6.1.4.1.4526.10.25.2.7.1.1,FASTPATH-DHCP6SERVER-PRIVATE-MIB::agentDhcp6ServerPoolAllocationIndex,Unsigned32,read-only,,current,,The DNS Server Pool Allocation Index, which will be used as index  for the DNS Server Pool Allocation Table.
.1.3.6.1.4.1.4526.10.25.2.7.1.2,FASTPATH-DHCP6SERVER-PRIVATE-MIB::agentDhcp6ServerPoolAllocationClientIdentifier,OCTET,read-create,,current,,It specifies the unique identifier, a.k.a. DUID, (in colon-separated hexadecimal format) of a DHCPv6 client. 
.1.3.6.1.4.1.4526.10.25.2.7.1.3,FASTPATH-DHCP6SERVER-PRIVATE-MIB::agentDhcp6ServerPoolAllocationPrefix,OCTET,read-create,,current,,The IPv6 address prefix for delegation to DHCPv6 clients.
.1.3.6.1.4.1.4526.10.25.2.7.1.4,FASTPATH-DHCP6SERVER-PRIVATE-MIB::agentDhcp6ServerPoolAllocationPrefixLength,Integer32,read-create,,current,,This specifies the no. of bits that comprise the address-prefix mask  length.
.1.3.6.1.4.1.4526.10.25.2.7.1.5,FASTPATH-DHCP6SERVER-PRIVATE-MIB::agentDhcp6ServerPoolAllocationClientName,OCTET,read-create,,current,,It specifies a name for a DHCPv6 client. This name is purely used for internal use, and can be a NULL string.
.1.3.6.1.4.1.4526.10.25.2.7.1.6,FASTPATH-DHCP6SERVER-PRIVATE-MIB::agentDhcp6ServerPoolAllocationIaid,Unsigned32,read-create,,current,,This specifies a identity association ID (IAID) associated with the allocation. It can be set to 0.
.1.3.6.1.4.1.4526.10.25.2.7.1.7,FASTPATH-DHCP6SERVER-PRIVATE-MIB::agentDhcp6ServerPoolAllocationValidLifetime,Unsigned32,read-create,,current,,This specifies the valid lifetime timer interval (in seconds) for the associated allocation. If set to 0, the timer is set to 'infinity'.
.1.3.6.1.4.1.4526.10.25.2.7.1.8,FASTPATH-DHCP6SERVER-PRIVATE-MIB::agentDhcp6ServerPoolAllocationPreferLifetime,Unsigned32,read-create,,current,,This specifies the preferred lifetime timer interval (in seconds) for  the associated allocation. If set to 0, the timer is set to 'infinity'. Also, the preferred lifetime value must be less than or equal to the  valid lifetime value.
.1.3.6.1.4.1.4526.10.25.2.7.1.9,FASTPATH-DHCP6SERVER-PRIVATE-MIB::agentDhcp6ServerPoolAllocationRowStatus,INTEGER,read-create,,current,active(1):notInService(2):notReady(3):createAndGo(4):createAndWait(5):destroy(6),The row status variable is used according to installation and removal conventions for conceptual rows. When an allocation is created,  row-status becomes 'active'. If row-status for an allocation is set to 'invalid', the corresponding allocation gets deleted. 
.1.3.6.1.4.1.4526.10.25.3,FASTPATH-DHCP6SERVER-PRIVATE-MIB::agentDhcp6InterfaceGroup,,,,,,
.1.3.6.1.4.1.4526.10.25.3.1,FASTPATH-DHCP6SERVER-PRIVATE-MIB::agentDhcp6InterfaceTable,,not-accessible,,current,,A table of the DHCPv6 Server/Relay interface entries.
.1.3.6.1.4.1.4526.10.25.3.1.1,FASTPATH-DHCP6SERVER-PRIVATE-MIB::agentDhcp6InterfaceEntry,,not-accessible,agentDhcp6InterfaceIndex,current,,Represents entry for DHCPv6 server or relay functionality on an  interface.
.1.3.6.1.4.1.4526.10.25.3.1.1.1,FASTPATH-DHCP6SERVER-PRIVATE-MIB::agentDhcp6InterfaceIndex,Integer32,not-accessible,,current,,This specifies the ifindex of the DHCPv6 interface
.1.3.6.1.4.1.4526.10.25.3.1.1.2,FASTPATH-DHCP6SERVER-PRIVATE-MIB::agentDhcp6InterfaceMode,INTEGER,read-create,,current,disable(0):server(1):relay(2),This specifies whether an interface is in DHCPv6 Server or Relay mode. Setting the mode to 'disable' (0) effectively un-configures the  interface.
.1.3.6.1.4.1.4526.10.25.3.1.1.3,FASTPATH-DHCP6SERVER-PRIVATE-MIB::agentDhcp6InterfaceServerPoolName,OCTET,read-create,,current,,This specifies a DHCPv6 Server pool name, which exists within the agentDhcp6ServerPoolConfigTable. This parameter is only meaningful when the interface is in DHCPv6 server mode.
.1.3.6.1.4.1.4526.10.25.3.1.1.4,FASTPATH-DHCP6SERVER-PRIVATE-MIB::agentDhcp6InterfaceServerPreference,Unsigned32,read-create,,current,,This specifies a DHCPv6 Server preference value, which is used by DHCPv6 clients to choose betweeen servers. This parameter is only meaningful when the interface is in DHCPv6 server mode.
.1.3.6.1.4.1.4526.10.25.3.1.1.5,FASTPATH-DHCP6SERVER-PRIVATE-MIB::agentDhcp6InterfaceRelayAddress,OCTET,read-create,,current,,This specifies the IPv6 address of a DHCPv6 relay server, to which DHCPv6 messages receivd on this interface will be relayed. If this is specified as global IPv6 address, then agentDhcp6ServerInterfaceRelayInterface is not required to be configured. However, if the address is specified as a link-local or multicast address, then agentDhcp6ServerInterfaceRelayInterface is required. This parameter is only meaningful when the interface is in DHCPv6 relay mode.
.1.3.6.1.4.1.4526.10.25.3.1.1.6,FASTPATH-DHCP6SERVER-PRIVATE-MIB::agentDhcp6InterfaceRelayInterface,Integer32,read-create,,current,,This specifies the IPv6 ifindex of a interface to reach a DHCPv6 relay server, to which DHCPv6 messages received on this interface will be relayed. This parameter is only meaningful when the interface is in DHCPv6 relay mode.
.1.3.6.1.4.1.4526.10.25.3.1.1.7,FASTPATH-DHCP6SERVER-PRIVATE-MIB::agentDhcp6InterfaceRemoteIdentifier,OCTET,read-create,,current,,This specifies the Relay Agent Information Option 'remote-id' sub-option to be attached to DHCPv6 messages being relayed on this interface. There exists a special reserved value of 'duid-ifid', which causes the remote-id value to be derived from the local DHCPv6 Server DUID and the interface ifindex. Otherwise, the string defined here is used as the remote-id value. This parameter is only meaningful when the interface is in DHCPv6 relay mode.
.1.3.6.1.4.1.4526.10.25.3.1.1.8,FASTPATH-DHCP6SERVER-PRIVATE-MIB::agentDhcp6InterfaceOptionFlags,BITS,read-create,,current,rapid-commit(0):allow-unicast(1),This specifies a bitmask field for various DHCPv6 options. Currently, only the 'rapid-commit' option is available, which is only meaningful when the interface is in DHCPv6 Server mode. Setting this parameter to 0 effectively clears any configured option flags on the interface.
.1.3.6.1.4.1.4526.10.25.3.2,FASTPATH-DHCP6SERVER-PRIVATE-MIB::agentDhcp6InterfaceStatsTable,,not-accessible,,current,,A table of the DHCPv6 Server/Relay interface statistics
.1.3.6.1.4.1.4526.10.25.3.2.1,FASTPATH-DHCP6SERVER-PRIVATE-MIB::agentDhcp6InterfaceStatsEntry,,not-accessible,agentDhcp6InterfaceStatsIndex,current,,Represents entry for DHCPv6 server or relay statistics on an interface.
.1.3.6.1.4.1.4526.10.25.3.2.1.1,FASTPATH-DHCP6SERVER-PRIVATE-MIB::agentDhcp6InterfaceStatsIndex,Integer32,not-accessible,,current,,This specifies the ifindex of the DHCPv6 interface
.1.3.6.1.4.1.4526.10.25.3.2.1.2,FASTPATH-DHCP6SERVER-PRIVATE-MIB::agentDhcp6InterfaceMalformedMessagesReceived,Counter32,read-only,,current,, The number of malformed (truncated or corrupt) messages that have been received on the interface
.1.3.6.1.4.1.4526.10.25.3.2.1.3,FASTPATH-DHCP6SERVER-PRIVATE-MIB::agentDhcp6InterfaceDiscardedMessages,Counter32,read-only,,current,, The no. of discarded messages on the interface.
.1.3.6.1.4.1.4526.10.25.3.2.1.4,FASTPATH-DHCP6SERVER-PRIVATE-MIB::agentDhcp6InterfaceSOLICITMessagesReceived,Counter32,read-only,,current,, The no. of DHCPv6 messages of type SOLICIT that have been received on the interface.
.1.3.6.1.4.1.4526.10.25.3.2.1.5,FASTPATH-DHCP6SERVER-PRIVATE-MIB::agentDhcp6InterfaceREQUESTMessagesReceived,Counter32,read-only,,current,, The no. of DHCPv6 messages of type REQUEST that have been received on the interface.
.1.3.6.1.4.1.4526.10.25.3.2.1.6,FASTPATH-DHCP6SERVER-PRIVATE-MIB::agentDhcp6InterfaceCONFIRMMessagesReceived,Counter32,read-only,,current,, The no. of DHCPv6 messages of type CONFIRM that have been received on the interface.
.1.3.6.1.4.1.4526.10.25.3.2.1.7,FASTPATH-DHCP6SERVER-PRIVATE-MIB::agentDhcp6InterfaceRENEWMessagesReceived,Counter32,read-only,,current,, The no. of DHCPv6 messages of type RENEW that have been received on the interface.
.1.3.6.1.4.1.4526.10.25.3.2.1.8,FASTPATH-DHCP6SERVER-PRIVATE-MIB::agentDhcp6InterfaceREBINDMessagesReceived,Counter32,read-only,,current,, The no. of DHCPv6 messages of type REBIND that have been received on the interface.
.1.3.6.1.4.1.4526.10.25.3.2.1.9,FASTPATH-DHCP6SERVER-PRIVATE-MIB::agentDhcp6InterfaceRELEASEMessagesReceived,Counter32,read-only,,current,, The no. of DHCPv6 messages of type RELEASE that have been received on the interface.
.1.3.6.1.4.1.4526.10.25.3.2.1.10,FASTPATH-DHCP6SERVER-PRIVATE-MIB::agentDhcp6InterfaceDECLINEMessagesReceived,Counter32,read-only,,current,, The no. of DHCPv6 messages of type DECLINE that have been received on the interface.
.1.3.6.1.4.1.4526.10.25.3.2.1.11,FASTPATH-DHCP6SERVER-PRIVATE-MIB::agentDhcp6InterfaceINFORMREQMessagesReceived,Counter32,read-only,,current,, The no. of DHCPv6 messages of type INFORMATION-REQUEST that have been received on the interface.
.1.3.6.1.4.1.4526.10.25.3.2.1.12,FASTPATH-DHCP6SERVER-PRIVATE-MIB::agentDhcp6InterfaceRELAYREPLYMessagesReceived,Counter32,read-only,,current,, The no. of DHCPv6 messages of type RELAY-REPLY that have been received on the interface.
.1.3.6.1.4.1.4526.10.25.3.2.1.13,FASTPATH-DHCP6SERVER-PRIVATE-MIB::agentDhcp6InterfaceRELAYFORWMessagesReceived,Counter32,read-only,,current,, The no. of DHCPv6 messages of type RELAY-FORWARD that have been received on the interface.
.1.3.6.1.4.1.4526.10.25.3.2.1.14,FASTPATH-DHCP6SERVER-PRIVATE-MIB::agentDhcp6InterfaceADVERTISEMessagesSent,Counter32,read-only,,current,, The no. of DHCPv6 messages of type ADVERTISE that have been sent on the interface.
.1.3.6.1.4.1.4526.10.25.3.2.1.15,FASTPATH-DHCP6SERVER-PRIVATE-MIB::agentDhcp6InterfaceREPLYMessagesSent,Counter32,read-only,,current,, The no. of DHCPv6 messages of type REPLY that have been sent on the interface.
.1.3.6.1.4.1.4526.10.25.3.2.1.16,FASTPATH-DHCP6SERVER-PRIVATE-MIB::agentDhcp6InterfaceRECONFIGUREMessagesSent,Counter32,read-only,,current,, The no. of DHCPv6 messages of type RECONFIGURE that have been sent on the interface.
.1.3.6.1.4.1.4526.10.25.3.2.1.17,FASTPATH-DHCP6SERVER-PRIVATE-MIB::agentDhcp6InterfaceRELAYREPLYMessagesSent,Counter32,read-only,,current,, The no. of DHCPv6 messages of type RELAY-REPLY that have been sent on the interface.
.1.3.6.1.4.1.4526.10.25.3.2.1.18,FASTPATH-DHCP6SERVER-PRIVATE-MIB::agentDhcp6InterfaceRELAYFORWMessagesSent,Counter32,read-only,,current,, The no. of DHCPv6 messages of type RELAY-FORWARD that have been sent on the interface.
.1.3.6.1.4.1.4526.10.25.3.2.1.19,FASTPATH-DHCP6SERVER-PRIVATE-MIB::agentDhcp6InterfaceClearStatistics,INTEGER,read-create,,current,enable(1):disable(2), Clears the DHCPv6 statistics on the interface.
.1.3.6.1.4.1.4526.10.25.4,FASTPATH-DHCP6SERVER-PRIVATE-MIB::agentDhcp6ServerBindingGroup,,,,,,
.1.3.6.1.4.1.4526.10.25.4.1,FASTPATH-DHCP6SERVER-PRIVATE-MIB::agentDhcp6ServerBindingTable,,not-accessible,,current,,A table of the DHCPv6 Server's active binding entries.
.1.3.6.1.4.1.4526.10.25.4.1.1,FASTPATH-DHCP6SERVER-PRIVATE-MIB::agentDhcp6ServerBindingEntry,,not-accessible,agentDhcp6ServerBindingIndex,current,,Represents entry for a DHCPv6 server's active bindings.
.1.3.6.1.4.1.4526.10.25.4.1.1.1,FASTPATH-DHCP6SERVER-PRIVATE-MIB::agentDhcp6ServerBindingIndex,Unsigned32,read-only,,current,,The index of the entry in the list of the DHCPv6 server's active  bindings.
.1.3.6.1.4.1.4526.10.25.4.1.1.2,FASTPATH-DHCP6SERVER-PRIVATE-MIB::agentDhcp6ServerBindingPrefix,OCTET,read-only,,current,,The IPv6 address prefix delegated to a DHCPv6 client.
.1.3.6.1.4.1.4526.10.25.4.1.1.3,FASTPATH-DHCP6SERVER-PRIVATE-MIB::agentDhcp6ServerBindingPrefixLength,Integer32,read-only,,current,,This specifies the no. of bits that comprise the  address-prefix mask length for the delegated prefix.
.1.3.6.1.4.1.4526.10.25.4.1.1.4,FASTPATH-DHCP6SERVER-PRIVATE-MIB::agentDhcp6ServerBindingPrefixType,INTEGER,read-only,,current,iapd(0),This specifies the type of prefix associated with the binding. Currently, only IA_PD type (prefix delegation) is supported.
.1.3.6.1.4.1.4526.10.25.4.1.1.5,FASTPATH-DHCP6SERVER-PRIVATE-MIB::agentDhcp6ServerBindingClientIdentifier,OCTET,read-only,,current,,It specifies the unique identifier, a.k.a. DUID, (in colon-separated hexadecimal format) of a DHCPv6 client. 
.1.3.6.1.4.1.4526.10.25.4.1.1.6,FASTPATH-DHCP6SERVER-PRIVATE-MIB::agentDhcp6ServerBindingClientAddress,OCTET,read-only,,current,,It specifies the address for a DHCPv6 client.
.1.3.6.1.4.1.4526.10.25.4.1.1.7,FASTPATH-DHCP6SERVER-PRIVATE-MIB::agentDhcp6ServerBindingClientInterface,Integer32,read-only,,current,,It specifies the interface for a DHCPv6 client.
.1.3.6.1.4.1.4526.10.25.4.1.1.8,FASTPATH-DHCP6SERVER-PRIVATE-MIB::agentDhcp6ServerBindingIaid,Unsigned32,read-only,,current,,This specifies a identity association ID (IAID) associated with the binding.
.1.3.6.1.4.1.4526.10.25.4.1.1.9,FASTPATH-DHCP6SERVER-PRIVATE-MIB::agentDhcp6ServerBindingValidLifetime,Unsigned32,read-only,,current,,This specifies the valid lifetime timer interval (in seconds) for the associated allocation. If set to 0, the timer is set to 'infinity'.
.1.3.6.1.4.1.4526.10.25.4.1.1.10,FASTPATH-DHCP6SERVER-PRIVATE-MIB::agentDhcp6ServerBindingPreferLifetime,Unsigned32,read-only,,current,,This specifies the preferred lifetime timer interval (in seconds) for  the associated allocation. If set to 0, the timer is set to 'infinity'. Also, the preferred lifetime value must be less than or equal to the  valid lifetime value.
.1.3.6.1.4.1.4526.10.25.4.1.1.11,FASTPATH-DHCP6SERVER-PRIVATE-MIB::agentDhcp6ServerBindingExpiration,Unsigned32,read-only,,current,,This specifies the amount of time (in seconds) for the associated binding to expire.
.1.3.6.1.4.1.4526.10.27,FASTPATH-IPV6-TUNNEL-MIB::fastPathIpv6Tunnel,,,,,,The NETGEAR Private MIB for FastPath IPV6 Tunnel
.1.3.6.1.4.1.4526.10.27.1,FASTPATH-IPV6-TUNNEL-MIB::agentTunnelIPV6Group,,,,,,
.1.3.6.1.4.1.4526.10.27.1.1,FASTPATH-IPV6-TUNNEL-MIB::agentTunnelIPV6Table,,not-accessible,,current,,A summary table of the IPV6 tunnel instances
.1.3.6.1.4.1.4526.10.27.1.1.1,FASTPATH-IPV6-TUNNEL-MIB::agentTunnelIPV6Entry,,not-accessible,agentTunnelID,current,,
.1.3.6.1.4.1.4526.10.27.1.1.1.1,FASTPATH-IPV6-TUNNEL-MIB::agentTunnelID,Integer32,not-accessible,,current,,The tunnel ID is associated with Internal Interface number which is generated when we create a tunnel, and is used  to configure the tunnel.
.1.3.6.1.4.1.4526.10.27.1.1.1.2,FASTPATH-IPV6-TUNNEL-MIB::agentTunnelIfIndex,Integer32,read-only,,current,,The external interface of the tunnel is associted with  internal interface. The tunnel ID associated with  Internal Interface number is generated when we create a  tunnel, which is used to configure the tunnel.
.1.3.6.1.4.1.4526.10.27.1.1.1.3,FASTPATH-IPV6-TUNNEL-MIB::agentTunnelMode,INTEGER,read-create,,current,undefined(1):ip6over4(2):ip6to4(3),Specifies the type of Tunnel either undefined, 6over4 or 6to4. The default value is undefined. It supports 6over4 which supports an assigned IPV6 address, an IPV4 address is not allowed. For this mode, the tunnel source and  tunnel destination must be IPV4 address. For 6to4 tunnel, the tunnel source must be IPv4 address. Tunnel destination should not be set. The first 48-bits of the IPv4 address assigned to the 6to4 tunnel should be of the format 2002:sourceIpv4address.
.1.3.6.1.4.1.4526.10.27.1.1.1.4,FASTPATH-IPV6-TUNNEL-MIB::agentTunnelLocalIP4Addr,OCTET,read-write,,current,,The address of the Local endpoint of the tunnel i.e. the source address used in the outer IP header. It is 0.0.0.0 if unknown or the tunnel is over IPv6.
.1.3.6.1.4.1.4526.10.27.1.1.1.5,FASTPATH-IPV6-TUNNEL-MIB::agentTunnelRemoteIP4Addr,OCTET,read-write,,current,,The address of the Remote endpoint of the tunnel i.e. the destination address used in the outer IP header. It is 0.0.0.0 if the tunnel is unknown or IPv6 address, or not a point to point link
.1.3.6.1.4.1.4526.10.27.1.1.1.6,FASTPATH-IPV6-TUNNEL-MIB::agentTunnelLocalIfIndex,Integer32,read-write,,current,,Specifies the interface for IPv6 Tunnel Source
.1.3.6.1.4.1.4526.10.27.1.1.1.7,FASTPATH-IPV6-TUNNEL-MIB::agentTunnelStatus,INTEGER,read-create,,current,active(1):notInService(2):notReady(3):createAndGo(4):createAndWait(5):destroy(6),Status of this instance.Row can be added or deleted by setting the value to createAndGo/destroy active(1) - this Tunnel instance is active createAndGo(4) - set to this value to create an instance destroy(6) - set to this value to delete an instance
.1.3.6.1.4.1.4526.10.27.1.1.1.8,FASTPATH-IPV6-TUNNEL-MIB::agentTunnelIcmpUnreachableMode,INTEGER,read-create,,current,enable(1):disable(2),Specifies the Mode of Sending ICMPv6 Unreachable messages on this tunnel interface.
.1.3.6.1.4.1.4526.10.27.1.2,FASTPATH-IPV6-TUNNEL-MIB::agentTunnelIPV6PrefixTable,,not-accessible,,current,,A table of the IPV6 prefixes associated with tunnel instances
.1.3.6.1.4.1.4526.10.27.1.2.1,FASTPATH-IPV6-TUNNEL-MIB::agentTunnelIPV6PrefixEntry,,not-accessible,agentTunnelID:agentTunnelIPV6PrefixPrefix:agentTunnelIPV6PrefixPrefixLen,current,,
.1.3.6.1.4.1.4526.10.27.1.2.1.1,FASTPATH-IPV6-TUNNEL-MIB::agentTunnelIPV6PrefixPrefix,OCTET,not-accessible,,current,,The prefix associated with the tunnel interface. The data type is used to model the IPV6 address. It is a binary string of 16 octects in network byte-order. It specifies the IP  address of tunnel which will be in IPV6 Format, generated using internal interface number.
.1.3.6.1.4.1.4526.10.27.1.2.1.2,FASTPATH-IPV6-TUNNEL-MIB::agentTunnelIPV6PrefixPrefixLen,Unsigned32,not-accessible,,current,,The length of the prefix (in bits).
.1.3.6.1.4.1.4526.10.27.1.2.1.3,FASTPATH-IPV6-TUNNEL-MIB::agentTunnelIPV6PrefixStatus,INTEGER,read-create,,current,active(1):notInService(2):notReady(3):createAndGo(4):createAndWait(5):destroy(6),Status of this instance.Row can be added or deleted by setting the value to createAndGo/destroy  active(1) - this Tunnel instance is active createAndGo(4) - set to this value to create an instance destroy(6) - set to this value to delete an instance
.1.3.6.1.4.1.4526.10.30,FASTPATH-ROUTING6-MIB::fastPathRoutingIpv6,,,,,,The NETGEAR Private MIB for FastPath Ipv6 Routing
.1.3.6.1.4.1.4526.10.30.1,FASTPATH-ROUTING6-MIB::agentIpv6Group,,,,,,
.1.3.6.1.4.1.4526.10.30.1.1,FASTPATH-ROUTING6-MIB::agentIpv6RoutingMode,INTEGER,read-write,,current,enable(1):disable(2),Administratively enables/disables ipv6 unicast routing on the switch.
.1.3.6.1.4.1.4526.10.30.1.2,FASTPATH-ROUTING6-MIB::agentIpv6InterfaceTable,,not-accessible,,current,,
.1.3.6.1.4.1.4526.10.30.1.2.1,FASTPATH-ROUTING6-MIB::agentIpv6InterfaceEntry,,not-accessible,agentIpv6InterfaceIfIndex,current,,
.1.3.6.1.4.1.4526.10.30.1.2.1.1,FASTPATH-ROUTING6-MIB::agentIpv6InterfaceIfIndex,Integer32,read-only,,current,,The IfIndex associated with this instance.
.1.3.6.1.4.1.4526.10.30.1.2.1.2,FASTPATH-ROUTING6-MIB::agentIpv6InterfaceMtuValue,Unsigned32,read-write,,current,,Configures the MTU value for this interface.If it is not yet configured, retrieving the value of this object results in a zero value. Setting the value zero to this object effectively un-configures the MTU.
.1.3.6.1.4.1.4526.10.30.1.2.1.3,FASTPATH-ROUTING6-MIB::agentIpv6InterfaceDadTransmits,Integer32,read-write,,current,,Configures the dad transmits value for this interface.
.1.3.6.1.4.1.4526.10.30.1.2.1.4,FASTPATH-ROUTING6-MIB::agentIpv6InterfaceLinkLocalOnly,INTEGER,read-write,,current,enable(1):disable(2),When enabled, interface is capable of ipv6 operation without a global address. In this case, an eui-64 based link-local address is used. 
.1.3.6.1.4.1.4526.10.30.1.2.1.5,FASTPATH-ROUTING6-MIB::agentIpv6InterfaceIcmpUnreachables,INTEGER,read-write,,current,enable(1):disable(2),If this object is enable, it indicates that ICMPv6 unreachables can be sent on this interface.
.1.3.6.1.4.1.4526.10.30.1.3,FASTPATH-ROUTING6-MIB::agentIpv6RouterAdvertisementTable,,not-accessible,,current,,There is no global administrative flag for router advertisement. The global routing flag (agentIpv6RoutingMode) will be used for this purpose. If routing is disabled, router advertisement is disabled as well.
.1.3.6.1.4.1.4526.10.30.1.3.1,FASTPATH-ROUTING6-MIB::agentIpv6RouterAdvertisementEntry,,not-accessible,agentIpv6RouterAdvertisementIfIndex,current,,
.1.3.6.1.4.1.4526.10.30.1.3.1.1,FASTPATH-ROUTING6-MIB::agentIpv6RouterAdvertisementIfIndex,Integer32,read-only,,current,,Interface Number to configure Router Advertisement on.
.1.3.6.1.4.1.4526.10.30.1.3.1.2,FASTPATH-ROUTING6-MIB::agentIpv6RouterAdvertisementSuppressMode,INTEGER,read-write,,current,enable(1):disable(2),Enable or disable router advertisement suppression on the interface.
.1.3.6.1.4.1.4526.10.30.1.3.1.3,FASTPATH-ROUTING6-MIB::agentIpv6RouterAdvertisementMaxAdvertisementInterval,Integer32,read-write,,current,,Maximum time allowed between sending router advertisements  from the interface.
.1.3.6.1.4.1.4526.10.30.1.3.1.4,FASTPATH-ROUTING6-MIB::agentIpv6RouterAdvertisementAdvertisementLifetime,Integer32,read-write,,current,,Value of lifetime field of router advertisement sent from  the interface.  This value must be greater than or equal to  agentIpv6RouterAdvertisementMaxAdvertisementInterval.
.1.3.6.1.4.1.4526.10.30.1.3.1.5,FASTPATH-ROUTING6-MIB::agentIpv6RouterAdvertisementNbrSolicitInterval,Integer32,read-write,,current,,Value of retrans time field of router advertisement sent from  the interface. A value of 0 means this router does not specifiy  the interval.
.1.3.6.1.4.1.4526.10.30.1.3.1.6,FASTPATH-ROUTING6-MIB::agentIpv6RouterAdvertisementReachableTime,Integer32,read-write,,current,,Value of reachable time field of router advertisement sent from  the interface. A value of 0 means this router does not specifiy  the interval.
.1.3.6.1.4.1.4526.10.30.1.3.1.7,FASTPATH-ROUTING6-MIB::agentIpv6RouterAdvertisementManagedFlag,INTEGER,read-write,,current,enable(1):disable(2),Value of managed config field of router advertisement sent from  the interface.
.1.3.6.1.4.1.4526.10.30.1.3.1.8,FASTPATH-ROUTING6-MIB::agentIpv6RouterAdvertisementOtherFlag,INTEGER,read-write,,current,enable(1):disable(2),Value of other config field of router advertisement sent from  the interface.
.1.3.6.1.4.1.4526.10.30.1.4,FASTPATH-ROUTING6-MIB::agentIpv6AddrPrefixTable,,not-accessible,,current,,The list of IPv6 address prefixes of IPv6 interfaces.
.1.3.6.1.4.1.4526.10.30.1.4.1,FASTPATH-ROUTING6-MIB::agentIpv6AddrPrefixEntry,,not-accessible,agentIpv6InterfaceIfIndex:agentIpv6AddrPrefix:agentIpv6AddrPrefixLength,current,,An interface entry containing objects of a particular IPv6 address prefix.
.1.3.6.1.4.1.4526.10.30.1.4.1.1,FASTPATH-ROUTING6-MIB::agentIpv6AddrPrefix,OCTET,not-accessible,,current,,The prefix associated with the this interface.
.1.3.6.1.4.1.4526.10.30.1.4.1.2,FASTPATH-ROUTING6-MIB::agentIpv6AddrPrefixLength,INTEGER,not-accessible,,current,,The length of the prefix (in bits).
.1.3.6.1.4.1.4526.10.30.1.4.1.3,FASTPATH-ROUTING6-MIB::agentIpv6AddrPrefixOnLinkFlag,INTEGER,read-write,,current,true(1):false(2),This object has the value 'true(1)', if this prefix can be used for on-link determination and the value 'false(2)' otherwise.
.1.3.6.1.4.1.4526.10.30.1.4.1.4,FASTPATH-ROUTING6-MIB::agentIpv6AddrPrefixAutonomousFlag,INTEGER,read-write,,current,true(1):false(2),Autonomous address configuration flag. When true(1), indicates that this prefix can be used for autonomous address configuration (i.e. can be used to form a local interface address). If false(2), it is not used to autoconfigure a local interface address.
.1.3.6.1.4.1.4526.10.30.1.4.1.5,FASTPATH-ROUTING6-MIB::agentIpv6AddrPrefixAdvPreferredLifetime,Unsigned32,read-write,,current,,It is the length of time in seconds that this prefix will remain preferred, i.e. time until deprecation. A value of 4,294,967,295 represents infinity.  The address generated from a deprecated prefix should no longer be used as a source address in new communications, but packets received on such an interface are processed as expected.
.1.3.6.1.4.1.4526.10.30.1.4.1.6,FASTPATH-ROUTING6-MIB::agentIpv6AddrPrefixAdvValidLifetime,Unsigned32,read-write,,current,,It is the length of time in seconds that this prefix will remain valid, i.e. time until invalidation. A value of 4,294,967,295 represents infinity.  The address generated from an invalidated prefix should not appear as the destination or source address of a packet.
.1.3.6.1.4.1.4526.10.30.1.5,FASTPATH-ROUTING6-MIB::agentIpv6AddrTable,,not-accessible,,current,,The table of addressing information relevant to this node's interface addresses.
.1.3.6.1.4.1.4526.10.30.1.5.1,FASTPATH-ROUTING6-MIB::agentIpv6AddrEntry,,not-accessible,agentIpv6InterfaceIfIndex:agentIpv6AddrAddress,current,,The addressing information for one of this node's interface addresses.
.1.3.6.1.4.1.4526.10.30.1.5.1.1,FASTPATH-ROUTING6-MIB::agentIpv6AddrAddress,OCTET,not-accessible,,current,,The IPv6 address to which this entry's addressing information pertains.
.1.3.6.1.4.1.4526.10.30.1.5.1.2,FASTPATH-ROUTING6-MIB::agentIpv6AddrPfxLength,INTEGER,read-create,,current,,The length of the prefix (in bits) associated with the IPv6 address of this entry.
.1.3.6.1.4.1.4526.10.30.1.5.1.3,FASTPATH-ROUTING6-MIB::agentIpv6AddrEui64Flag,INTEGER,read-create,,current,true(1):false(2),This object has the value 'true(1)', if this address uses and eui-64 generated interface identifier and the value 'false(2)' otherwise.
.1.3.6.1.4.1.4526.10.30.1.5.1.4,FASTPATH-ROUTING6-MIB::agentIpv6AddrStatus,INTEGER,read-create,,current,active(1):notInService(2):notReady(3):createAndGo(4):createAndWait(5):destroy(6),Creates a new entry in the Address table. Allowed values are:  createAndGo(4) - Creates an entry in this table, associating the address with a given interface. The agentIpv6NetMask object must be set during creation.  destroy(6) - Removes the associated address from the interface.
.1.3.6.1.4.1.4526.10.30.1.6,FASTPATH-ROUTING6-MIB::agentIpv6StaticRouteTable,,not-accessible,,current,,IPv6 Static Routing table. This table contains an entry for each valid IPv6 static unicast route that can be used for packet forwarding determination.
.1.3.6.1.4.1.4526.10.30.1.6.1,FASTPATH-ROUTING6-MIB::agentIpv6StaticRouteEntry,,not-accessible,agentIpv6StaticRouteDest:agentIpv6StaticRoutePfxLength:agentIpv6StaticRouteIfIndex:agentIpv6StaticRouteNextHop,current,,A routing entry.
.1.3.6.1.4.1.4526.10.30.1.6.1.1,FASTPATH-ROUTING6-MIB::agentIpv6StaticRouteDest,OCTET,not-accessible,,current,,The destination IPv6 address of this route. This object may not take a Multicast address value.
.1.3.6.1.4.1.4526.10.30.1.6.1.2,FASTPATH-ROUTING6-MIB::agentIpv6StaticRoutePfxLength,INTEGER,not-accessible,,current,,Indicates the prefix length of the destination address.
.1.3.6.1.4.1.4526.10.30.1.6.1.3,FASTPATH-ROUTING6-MIB::agentIpv6StaticRouteIfIndex,Integer32,not-accessible,,current,,The index value which uniquely identifies the local interface through which the next hop of this route should be reached. The interface identified by a particular value of this index is the same interface as identified by the same value of ipv6IfIndex. For routes with global address next hop this value can be zero.
.1.3.6.1.4.1.4526.10.30.1.6.1.4,FASTPATH-ROUTING6-MIB::agentIpv6StaticRouteNextHop,OCTET,not-accessible,,current,,The address of the next system en route. 
.1.3.6.1.4.1.4526.10.30.1.6.1.5,FASTPATH-ROUTING6-MIB::agentIpv6StaticRoutePreference,INTEGER,read-create,,current,,The routing preference metric for this route. A lower value is more preferred.
.1.3.6.1.4.1.4526.10.30.1.6.1.6,FASTPATH-ROUTING6-MIB::agentIpv6StaticRouteStatus,INTEGER,read-create,,current,active(1):notInService(2):notReady(3):createAndGo(4):createAndWait(5):destroy(6),Creates a new entry in the Address table. Allowed values are:  createAndGo(4) - Creates an entry in this table.   destroy(6) - Removes the associated route from the interface.
.1.3.6.1.4.1.4526.10.30.1.7,FASTPATH-ROUTING6-MIB::agentIpv6ServicePortGroup,,,,,,
.1.3.6.1.4.1.4526.10.30.1.7.1,FASTPATH-ROUTING6-MIB::agentIpv6ServicePortPrefixTable,,not-accessible,,current,,IPv6 Service Port Prefix Table. This table contains an entry for each valid IPv6 prefix configured on the Service Port.
.1.3.6.1.4.1.4526.10.30.1.7.1.1,FASTPATH-ROUTING6-MIB::agentIpv6ServicePortPrefixEntry,,not-accessible,agentIpv6ServicePortPrefixIndex,current,,An IPv6 Service Port Prefix entry.
.1.3.6.1.4.1.4526.10.30.1.7.1.1.1,FASTPATH-ROUTING6-MIB::agentIpv6ServicePortPrefixIndex,Unsigned32,not-accessible,,current,,The index of the Ipv6 Prefix Address configured on the Service Port. Removal of a row will cause index values  to be reassigned.
.1.3.6.1.4.1.4526.10.30.1.7.1.1.2,FASTPATH-ROUTING6-MIB::agentIpv6ServicePortPrefix,OCTET,read-only,,current,,The Ipv6 Prefix Address configured on the Service Port.
.1.3.6.1.4.1.4526.10.30.1.7.1.1.3,FASTPATH-ROUTING6-MIB::agentIpv6ServicePortPrefixLength,Unsigned32,read-only,,current,,The length of the IPv6 Prefix Address.
.1.3.6.1.4.1.4526.10.30.1.7.2,FASTPATH-ROUTING6-MIB::agentIpv6ServicePortDefaultRouterTable,,not-accessible,,current,,IPv6 Service Port Default Router Table. This table contains an entry for each valid IPv6 Default Router configured on the Service Port.
.1.3.6.1.4.1.4526.10.30.1.7.2.1,FASTPATH-ROUTING6-MIB::agentIpv6ServicePortDefaultRouterEntry,,not-accessible,agentIpv6ServicePortDefaultRouterIndex,current,,An IPv6 Service Port Default Router entry.
.1.3.6.1.4.1.4526.10.30.1.7.2.1.1,FASTPATH-ROUTING6-MIB::agentIpv6ServicePortDefaultRouterIndex,Unsigned32,not-accessible,,current,,The index of the IPv6 Default Router Address  configured on the Service Port. Removal of a  row will cause index values to be reassigned.
.1.3.6.1.4.1.4526.10.30.1.7.2.1.2,FASTPATH-ROUTING6-MIB::agentIpv6ServicePortDefaultRouter,OCTET,read-only,,current,,The Address of the IPv6 Default Router configured  on the Service Port.
.1.3.6.1.4.1.4526.10.30.1.7.3,FASTPATH-ROUTING6-MIB::agentIpv6ServicePortNbrTable,,not-accessible,,current,,IPv6 Service Port Neighbor Table. This table contains an entry for each valid IPv6 Neighbor configured on the Service Port.
.1.3.6.1.4.1.4526.10.30.1.7.3.1,FASTPATH-ROUTING6-MIB::agentIpv6ServicePortNbrEntry,,not-accessible,agentIpv6ServicePortNbrAddr,current,,An IPv6 Service Port Neighbor entry.
.1.3.6.1.4.1.4526.10.30.1.7.3.1.1,FASTPATH-ROUTING6-MIB::agentIpv6ServicePortNbrAddr,OCTET,not-accessible,,current,,The Ipv6 Address of a neighbor switch visible to the Service Port.
.1.3.6.1.4.1.4526.10.30.1.7.3.1.2,FASTPATH-ROUTING6-MIB::agentIpv6ServicePortNbrPhysAddr,OCTET,read-only,,current,,The MacAddress of the neighboring switch.
.1.3.6.1.4.1.4526.10.30.1.7.3.1.3,FASTPATH-ROUTING6-MIB::agentIpv6ServicePortNbrState,INTEGER,read-only,,current,reachable(1):stale(2):delay(3):probe(4):unknown(6),The state of the neighboring switch: reachable(1) - The neighbor is reachable by this switch. stale(2) - Information about the neighbor is scheduled for deletion. delay(3) - No information has been received from neighbor during delay period. probe(4) - Switch is attempting to probe for this neighbor. unknown(6) - Unknown status.
.1.3.6.1.4.1.4526.10.30.1.7.3.1.4,FASTPATH-ROUTING6-MIB::agentIpv6ServicePortNbrUpdated,TimeTicks,read-only,,current,,The last sysUpTime that this neighbor has been updated.
.1.3.6.1.4.1.4526.10.30.1.7.3.1.5,FASTPATH-ROUTING6-MIB::agentIpv6ServicePortNbrIsRouter,INTEGER,read-only,,current,true(1):false(2),Returns true(1) if the neighbor machine is a router,  false(2) otherwise.
.1.3.6.1.4.1.4526.10.30.1.8,FASTPATH-ROUTING6-MIB::agentIpv6IcmpControlGroup,,,,,,
.1.3.6.1.4.1.4526.10.30.1.8.1,FASTPATH-ROUTING6-MIB::agentIpv6IcmpRateLimitInterval,Integer32,read-write,,current,,Specifies the time interval between tokens being placed in the bucket for ICMP Ratelimit.
.1.3.6.1.4.1.4526.10.30.1.8.2,FASTPATH-ROUTING6-MIB::agentIpv6IcmpRateLimitBurstSize,Integer32,read-write,,current,,Specifies the number of tokens to be placed after timeout.
.1.3.6.1.4.1.4526.10.31,FASTPATH-DENIALOFSERVICE-PRIVATE-MIB::fastPathDenialOfService,,,,,,The NETGEAR Private MIB for FASTPATH Denial of Service.
.1.3.6.1.4.1.4526.10.31.1,FASTPATH-DENIALOFSERVICE-PRIVATE-MIB::agentSwitchDenialOfServiceGroup,,,,,,
.1.3.6.1.4.1.4526.10.31.1.1,FASTPATH-DENIALOFSERVICE-PRIVATE-MIB::agentSwitchDenialOfServiceSIPDIPMode,INTEGER,read-write,,current,enable(1):disable(2),Enables or Disables the SIP=DIP Denial of Service  protection feature.
.1.3.6.1.4.1.4526.10.31.1.2,FASTPATH-DENIALOFSERVICE-PRIVATE-MIB::agentSwitchDenialOfServiceFirstFragMode,INTEGER,read-write,,current,enable(1):disable(2),Enables or Disables the First Fragment Denial of Service  protection feature.
.1.3.6.1.4.1.4526.10.31.1.3,FASTPATH-DENIALOFSERVICE-PRIVATE-MIB::agentSwitchDenialOfServiceTCPHdrSize,Integer32,read-write,,current,,Configures the Minimum allowed TCP Header size. This is active if the First Fragment Denial of Service protection feature is enabled.
.1.3.6.1.4.1.4526.10.31.1.4,FASTPATH-DENIALOFSERVICE-PRIVATE-MIB::agentSwitchDenialOfServiceTCPFragMode,INTEGER,read-write,,current,enable(1):disable(2),Enables or Disables the TCP Fragment Denial of Service  protection feature.
.1.3.6.1.4.1.4526.10.31.1.5,FASTPATH-DENIALOFSERVICE-PRIVATE-MIB::agentSwitchDenialOfServiceTCPFlagMode,INTEGER,read-write,,current,enable(1):disable(2),Enables or Disables the TCP Flag Denial of Service  protection feature.
.1.3.6.1.4.1.4526.10.31.1.6,FASTPATH-DENIALOFSERVICE-PRIVATE-MIB::agentSwitchDenialOfServiceL4PortMode,INTEGER,read-write,,current,enable(1):disable(2),Enables or Disables the L4 Port Denial of Service  protection feature.
.1.3.6.1.4.1.4526.10.31.1.7,FASTPATH-DENIALOFSERVICE-PRIVATE-MIB::agentSwitchDenialOfServiceICMPMode,INTEGER,read-write,,current,enable(1):disable(2),Enables or Disables the ICMP Denial of Service  protection feature.
.1.3.6.1.4.1.4526.10.31.1.8,FASTPATH-DENIALOFSERVICE-PRIVATE-MIB::agentSwitchDenialOfServiceICMPSize,Integer32,read-write,,current,,Configures the Maximum allowed ICMP data size. This is active if the ICMP Denial of Service protection feature is enabled.
.1.3.6.1.4.1.4526.10.31.1.9,FASTPATH-DENIALOFSERVICE-PRIVATE-MIB::agentSwitchDenialOfServiceSMACDMACMode,INTEGER,read-write,,current,enable(1):disable(2),Enables or Disables the SMAC=DMAC Denial of Service  protection feature.
.1.3.6.1.4.1.4526.10.31.1.10,FASTPATH-DENIALOFSERVICE-PRIVATE-MIB::agentSwitchDenialOfServiceTCPOffsetMode,INTEGER,read-write,,current,enable(1):disable(2),Enables or Disables the TCP Offset Denial of Service  protection feature.
.1.3.6.1.4.1.4526.10.31.1.11,FASTPATH-DENIALOFSERVICE-PRIVATE-MIB::agentSwitchDenialOfServiceTCPFlagSeqMode,INTEGER,read-write,,current,enable(1):disable(2),Enables or Disables the TCP Flag and Sequence Denial of Service  protection feature.
.1.3.6.1.4.1.4526.10.31.1.12,FASTPATH-DENIALOFSERVICE-PRIVATE-MIB::agentSwitchDenialOfServiceTCPPortMode,INTEGER,read-write,,current,enable(1):disable(2),Enables or Disables the TCP Port Denial of Service  protection feature.
.1.3.6.1.4.1.4526.10.31.1.13,FASTPATH-DENIALOFSERVICE-PRIVATE-MIB::agentSwitchDenialOfServiceUDPPortMode,INTEGER,read-write,,current,enable(1):disable(2),Enables or Disables the UDP Port Denial of Service  protection feature.
.1.3.6.1.4.1.4526.10.31.1.14,FASTPATH-DENIALOFSERVICE-PRIVATE-MIB::agentSwitchDenialOfServiceTCPSynMode,INTEGER,read-write,,current,enable(1):disable(2),Enables or Disables the TCP Syn Denial of Service  protection feature.
.1.3.6.1.4.1.4526.10.31.1.15,FASTPATH-DENIALOFSERVICE-PRIVATE-MIB::agentSwitchDenialOfServiceTCPSynFinMode,INTEGER,read-write,,current,enable(1):disable(2),Enables or Disables the TCP Syn and Fin Denial of Service  protection feature.
.1.3.6.1.4.1.4526.10.31.1.16,FASTPATH-DENIALOFSERVICE-PRIVATE-MIB::agentSwitchDenialOfServiceTCPFinUrgPshMode,INTEGER,read-write,,current,enable(1):disable(2),Enables or Disables the TCP Fin and Urg and Psh Denial of Service  protection feature.
.1.3.6.1.4.1.4526.10.31.1.18,FASTPATH-DENIALOFSERVICE-PRIVATE-MIB::agentSwitchDenialOfServiceICMPv6Size,Integer32,read-write,,current,,Configures the Maximum allowed ICMPv6 data size. This is active if the ICMPv6 Denial of Service protection feature is enabled.
.1.3.6.1.4.1.4526.10.31.1.19,FASTPATH-DENIALOFSERVICE-PRIVATE-MIB::agentSwitchDenialOfServiceICMPFragMode,INTEGER,read-write,,current,enable(1):disable(2),Enables or Disables the ICMP Fragment Denial of Service  protection feature.
.1.3.6.1.4.1.4526.10.37,FASTPATH-DNS-RESOLVER-CONTROL-MIB::fastPathDnsResControlMIB,,,,,,This MIB module defines a portion of the SNMP MIB under the NETGEAR enterprise OID pertaining to DNS Client control configuration
.1.3.6.1.4.1.4526.10.37.1,FASTPATH-DNS-RESOLVER-CONTROL-MIB::fastPathDnsResCtlMIBObjects,,,,,,
.1.3.6.1.4.1.4526.10.37.1.1,FASTPATH-DNS-RESOLVER-CONTROL-MIB::agentResCtlglobal,,,,,,
.1.3.6.1.4.1.4526.10.37.1.1.1,FASTPATH-DNS-RESOLVER-CONTROL-MIB::agentResCtlAdminMode,INTEGER,read-write,,current,true(1):false(2),The dns client administrative modes supported by the device. The dns client services can be turned on or off.
.1.3.6.1.4.1.4526.10.37.1.1.2,FASTPATH-DNS-RESOLVER-CONTROL-MIB::agentResCtlDefDomainName,OCTET,read-write,,current,,The default domain name for unqualified hostnames.
.1.3.6.1.4.1.4526.10.37.1.1.3,FASTPATH-DNS-RESOLVER-CONTROL-MIB::agentResCtlCacheFlushStatus,INTEGER,read-write,,current,dnsCacheFlushEnable(1):dnsCacheFlushDisable(2),The cache Flush status. If set to enable all dynamic cache  entries would be removed.
.1.3.6.1.4.1.4526.10.37.1.1.4,FASTPATH-DNS-RESOLVER-CONTROL-MIB::agentResCtlRequestTimeout,INTEGER,read-write,,current,,The timeout before retransmitting a request to the server. The  timeout value is configured and displayed in seconds.
.1.3.6.1.4.1.4526.10.37.1.1.5,FASTPATH-DNS-RESOLVER-CONTROL-MIB::agentResCtlRequestRetransmits,INTEGER,read-write,,current,,The number of times the request is retransmitted. The request is retransmitted provided the maximum timeout value allows this many number of retransmits.
.1.3.6.1.4.1.4526.10.37.1.1.6,FASTPATH-DNS-RESOLVER-CONTROL-MIB::agentResCtlDomainListTable,,not-accessible,,current,,A table for default domain list.
.1.3.6.1.4.1.4526.10.37.1.1.6.1,FASTPATH-DNS-RESOLVER-CONTROL-MIB::agentResCtlDomainListEntry,,not-accessible,agentResCtlDomainListName,current,,An entry in the DNS domain name list. Rows may be created or deleted at any time by the DNS Resolver and by SNMP SET requests.
.1.3.6.1.4.1.4526.10.37.1.1.6.1.1,FASTPATH-DNS-RESOLVER-CONTROL-MIB::agentResCtlDomainListName,OCTET,read-only,,current,,The dns domain list entry identified by this row of the table.
.1.3.6.1.4.1.4526.10.37.1.1.6.1.2,FASTPATH-DNS-RESOLVER-CONTROL-MIB::agentResCtlDomainListNameStatus,INTEGER,read-create,,current,active(1):notInService(2):notReady(3):createAndGo(4):createAndWait(5):destroy(6),Status of the DNS domain list Entry Table Supported values: active(1) - valid entry createAndGo(4) - used to create a new entry destroy(6) - removes the entry
.1.3.6.1.4.1.4526.10.37.1.2,FASTPATH-DNS-RESOLVER-CONTROL-MIB::agentResCtlServConfig,,,,,,
.1.3.6.1.4.1.4526.10.37.1.2.1,FASTPATH-DNS-RESOLVER-CONTROL-MIB::agentResCtlServConfigTable,,not-accessible,,current,,Table of DNS servers list
.1.3.6.1.4.1.4526.10.37.1.2.1.1,FASTPATH-DNS-RESOLVER-CONTROL-MIB::agentResCtlConfigIPEntry,,not-accessible,agentResCtlDnsNameServerIP,current,,An entry in the DNS Servers list. Rows may be created or deleted at any time by the DNS Resolver and by SNMP SET requests.
.1.3.6.1.4.1.4526.10.37.1.2.1.1.1,FASTPATH-DNS-RESOLVER-CONTROL-MIB::agentResCtlDnsNameServerIP,IpAddress,not-accessible,,current,,The IP address of the dns server identified by this row of the table.
.1.3.6.1.4.1.4526.10.37.1.2.1.1.2,FASTPATH-DNS-RESOLVER-CONTROL-MIB::agentResCtlDnsNameServerStatus,INTEGER,read-create,,current,active(1):notInService(2):notReady(3):createAndGo(4):createAndWait(5):destroy(6),Status of the DNS Server Address Table Supported values: active(1) - valid entry createAndGo(4) - used to create a new entry destroy(6) - removes the entry
.1.3.6.1.4.1.4526.10.37.1.3,FASTPATH-DNS-RESOLVER-CONTROL-MIB::agentResCtlStaticServConfig,,,,,,
.1.3.6.1.4.1.4526.10.37.1.3.1,FASTPATH-DNS-RESOLVER-CONTROL-MIB::agentResCtlStaticServConfigTable,,not-accessible,,current,,Static table of DNS hostname to IP address table
.1.3.6.1.4.1.4526.10.37.1.3.1.1,FASTPATH-DNS-RESOLVER-CONTROL-MIB::agentResCtlStaticServEntry,,not-accessible,agentResCtlStaticHostName:agentResCtlStaticIPAddress,current,,An entry in the static DNS hostname IP address list. Rows may be created or deleted at any time by the DNS Resolver and by SNMP SET requests.
.1.3.6.1.4.1.4526.10.37.1.3.1.1.1,FASTPATH-DNS-RESOLVER-CONTROL-MIB::agentResCtlStaticHostName,OCTET,not-accessible,,current,,The static hostname to be stored in the name server table.
.1.3.6.1.4.1.4526.10.37.1.3.1.1.2,FASTPATH-DNS-RESOLVER-CONTROL-MIB::agentResCtlStaticIPAddress,IpAddress,not-accessible,,current,,The IP address of the dns server for the static hostname.
.1.3.6.1.4.1.4526.10.37.1.3.1.1.3,FASTPATH-DNS-RESOLVER-CONTROL-MIB::agentResCtlStaticNameServerStatus,INTEGER,read-create,,current,active(1):notInService(2):notReady(3):createAndGo(4):createAndWait(5):destroy(6),Status of the Static Host Name - IP Address Table Supported values: active(1) - valid entry createAndGo(4) - used to create a new entry destroy(6) - removes the entry
.1.3.6.1.4.1.4526.10.38,FASTPATH-CAPTIVE-PORTAL-MIB::fastPathCaptivePortal,,,,,,The NETGEAR Private MIB for Captive Portal
.1.3.6.1.4.1.4526.10.38.1,FASTPATH-CAPTIVE-PORTAL-MIB::cpConfigGroup,,,,,,
.1.3.6.1.4.1.4526.10.38.1.1,FASTPATH-CAPTIVE-PORTAL-MIB::cpGlobalConfigGroup,,,,,,
.1.3.6.1.4.1.4526.10.38.1.1.1,FASTPATH-CAPTIVE-PORTAL-MIB::cpAdminMode,INTEGER,read-write,,current,enable(1):disable(2),Enable or disable the captive portal feature on the system.
.1.3.6.1.4.1.4526.10.38.1.1.2,FASTPATH-CAPTIVE-PORTAL-MIB::cpAdditionalHttpPort,Integer32,read-write,,current,,The additional captive portal authentication server port for  HTTP web connection. The HTTP port default is 0 which denotes  no specific port and the default port (80) is used.
.1.3.6.1.4.1.4526.10.38.1.1.3,FASTPATH-CAPTIVE-PORTAL-MIB::cpAdditionalHttpSecurePort,Integer32,read-write,,current,,The additional captive portal authentication server secure port for HTTPS web connection. This additional HTTPS port default is 0 which denotes no specific port and the default port (443) is used.
.1.3.6.1.4.1.4526.10.38.1.1.4,FASTPATH-CAPTIVE-PORTAL-MIB::cpPeerStatsReportingInterval,Integer32,read-write,,current,,The time interval between statistics reports to the cluster controller. A value of 0 indicates reporting is disabled. The value is represented in seconds.
.1.3.6.1.4.1.4526.10.38.1.1.5,FASTPATH-CAPTIVE-PORTAL-MIB::cpAuthTimeout,Integer32,read-write,,current,,The length of time to maintain an authentication session from a client.  This time is measured from when a client initiates an authentication request. The value is represented in seconds.
.1.3.6.1.4.1.4526.10.38.1.2,FASTPATH-CAPTIVE-PORTAL-MIB::cpCaptivePortalConfigGroup,,,,,,
.1.3.6.1.4.1.4526.10.38.1.2.1,FASTPATH-CAPTIVE-PORTAL-MIB::cpCaptivePortalTable,,not-accessible,,current,,A table of config parms for instances of captive portal.
.1.3.6.1.4.1.4526.10.38.1.2.1.1,FASTPATH-CAPTIVE-PORTAL-MIB::cpCaptivePortalEntry,,not-accessible,cpCaptivePortalInstanceId,current,,Captive Portal instance entry.
.1.3.6.1.4.1.4526.10.38.1.2.1.1.1,FASTPATH-CAPTIVE-PORTAL-MIB::cpCaptivePortalInstanceId,Unsigned32,read-only,,current,,The identifier associated with this instance of captive portal.
.1.3.6.1.4.1.4526.10.38.1.2.1.1.2,FASTPATH-CAPTIVE-PORTAL-MIB::cpCaptivePortalConfigName,OCTET,read-write,,current,,The name, in alpha-numeric characters, assigned to this captive portal configuration.
.1.3.6.1.4.1.4526.10.38.1.2.1.1.3,FASTPATH-CAPTIVE-PORTAL-MIB::cpCaptivePortalAdminMode,INTEGER,read-write,,current,enable(1):disable(2),Enable or disable this instance of captive portal on the system.
.1.3.6.1.4.1.4526.10.38.1.2.1.1.4,FASTPATH-CAPTIVE-PORTAL-MIB::cpCaptivePortalProtocolMode,INTEGER,read-write,,current,https(0):http(1),The protocol mode to be used.
.1.3.6.1.4.1.4526.10.38.1.2.1.1.5,FASTPATH-CAPTIVE-PORTAL-MIB::cpCaptivePortalVerificationMode,INTEGER,read-write,,current,guest(0):local(1):radius(2),The type of user verification to perform.
.1.3.6.1.4.1.4526.10.38.1.2.1.1.6,FASTPATH-CAPTIVE-PORTAL-MIB::cpCaptivePortalUserGroup,Unsigned32,read-write,,current,,The group ID for this captive portal user database. A group ID may be assigned for databases which use verification mode LOCAL.
.1.3.6.1.4.1.4526.10.38.1.2.1.1.7,FASTPATH-CAPTIVE-PORTAL-MIB::cpCaptivePortalURLRedirectMode,INTEGER,read-write,,current,enable(1):disable(2),Whether the captive portal should redirect newly authenticated  clients to the configured URL. If this mode is disabled, the  default locale specific welcome page is used. If enabled, the  client is redirected to a configured URL.
.1.3.6.1.4.1.4526.10.38.1.2.1.1.8,FASTPATH-CAPTIVE-PORTAL-MIB::cpCaptivePortalRedirectURL,OCTET,read-write,,current,,The URL to which the newly authenticated client is redirected  if cpCaptivePortalURLRedirectMode is enabled.
.1.3.6.1.4.1.4526.10.38.1.2.1.1.9,FASTPATH-CAPTIVE-PORTAL-MIB::cpCaptivePortalSessionTimeout,Unsigned32,read-write,,current,,The session timeout. After this limit has been reached the user  will be disconnected. If this value is set to 0, no timeout is enforced. This value is represented in seconds.
.1.3.6.1.4.1.4526.10.38.1.2.1.1.10,FASTPATH-CAPTIVE-PORTAL-MIB::cpCaptivePortalIdleTimeout,Unsigned32,read-write,,current,,The idle timeout of the session. After this limit has been reached the user  will be disconnected. If this value is set to 0, no timeout is enforced.  This value is represented in seconds.
.1.3.6.1.4.1.4526.10.38.1.2.1.1.11,FASTPATH-CAPTIVE-PORTAL-MIB::cpCaptivePortalRadiusAuthServer,OCTET,read-write,,current,,The RADIUS authentication server name, in alpha-numeric characters (or dotted IP address), assigned to this captive portal configuration.
.1.3.6.1.4.1.4526.10.38.1.2.1.1.12,FASTPATH-CAPTIVE-PORTAL-MIB::cpCaptivePortalMaxBandwidthUp,Unsigned32,read-write,,current,,The maximum bandwidth up/transmit bytes per second rate of the session. After this limit has been reached the user will be disconnected. If this value is set to 0, no rate limiting is enforced.  This value is represented in bytes (however; converted & stored as bits/sec).
.1.3.6.1.4.1.4526.10.38.1.2.1.1.13,FASTPATH-CAPTIVE-PORTAL-MIB::cpCaptivePortalMaxBandwidthDown,Unsigned32,read-write,,current,,The maximum bandwidth down/receive bytes per second rate of the session. After this limit has been reached the user will be disconnected. If this value is set to 0, no rate limiting is enforced.  This value is represented in bytes (however; converted & stored as bits/sec).
.1.3.6.1.4.1.4526.10.38.1.2.1.1.14,FASTPATH-CAPTIVE-PORTAL-MIB::cpCaptivePortalMaxInputOctets,Unsigned32,read-write,,current,,The maximum input octets (bytes) allowed for the session. After this limit has been reached the user will be disconnected. If this value is set to 0, no rate limiting is enforced.  This value is represented in bytes.
.1.3.6.1.4.1.4526.10.38.1.2.1.1.15,FASTPATH-CAPTIVE-PORTAL-MIB::cpCaptivePortalMaxOutputOctets,Unsigned32,read-write,,current,,The maximum Output octets (bytes) allowed for the session. After this limit has been reached the user will be disconnected. If this value is set to 0, no rate limiting is enforced.  This value is represented in bytes.
.1.3.6.1.4.1.4526.10.38.1.2.1.1.16,FASTPATH-CAPTIVE-PORTAL-MIB::cpCaptivePortalMaxTotalOctets,Unsigned32,read-write,,current,,The maximum input/output octets (bytes) allowed for the session. After this limit has been reached the user will be disconnected. If this value is set to 0, no rate limiting is enforced.  This value is represented in bytes.
.1.3.6.1.4.1.4526.10.38.1.2.1.1.17,FASTPATH-CAPTIVE-PORTAL-MIB::cpCaptivePortalUserLogoutMode,INTEGER,read-write,,current,enable(1):disable(2),Provides the captive portal authenticated user the ability to logout of their session through the use of a logout page. The connection will be terminated as a result of submitting the logout request.
.1.3.6.1.4.1.4526.10.38.1.2.1.1.18,FASTPATH-CAPTIVE-PORTAL-MIB::cpCaptivePortalRowStatus,INTEGER,read-create,,current,active(1):notInService(2):notReady(3):createAndGo(4):createAndWait(5):destroy(6),The captive portal instance status.  Supported values: active(1) - valid instance createAndGo(4) - creates a new instance destroy(6) - removes an instance
.1.3.6.1.4.1.4526.10.38.1.3,FASTPATH-CAPTIVE-PORTAL-MIB::cpLocalUserDatabaseGroup,,,,,,
.1.3.6.1.4.1.4526.10.38.1.3.1,FASTPATH-CAPTIVE-PORTAL-MIB::cpLocalUserGroupTable,,not-accessible,,current,,A table of group definitions for the local users. This database is  used by captive portal instances and local users if the verification mode is set to LOCAL.
.1.3.6.1.4.1.4526.10.38.1.3.1.1,FASTPATH-CAPTIVE-PORTAL-MIB::cpLocalUserGroupEntry,,not-accessible,cpLocalUserGroupIndex,current,,The user group entry.
.1.3.6.1.4.1.4526.10.38.1.3.1.1.1,FASTPATH-CAPTIVE-PORTAL-MIB::cpLocalUserGroupIndex,Integer32,not-accessible,,current,,The user group entry index.
.1.3.6.1.4.1.4526.10.38.1.3.1.1.2,FASTPATH-CAPTIVE-PORTAL-MIB::cpLocalUserGroupName,OCTET,read-write,,current,,The user group name, limited to alpha-numeric strings (including the '-' and '_' characters).
.1.3.6.1.4.1.4526.10.38.1.3.1.1.3,FASTPATH-CAPTIVE-PORTAL-MIB::cpLocalUserGroupRowStatus,INTEGER,read-create,,current,active(1):notInService(2):notReady(3):createAndGo(4):createAndWait(5):destroy(6),The user group entry status.  Supported values: active(1) - valid entry createAndGo(4) - creates a new entry destroy(6) - removes an entry
.1.3.6.1.4.1.4526.10.38.1.3.2,FASTPATH-CAPTIVE-PORTAL-MIB::cpLocalUserTable,,not-accessible,,current,,A table of user definitions for the local database. This database is  used by a captive portal instance if its verification mode is set to LOCAL.
.1.3.6.1.4.1.4526.10.38.1.3.2.1,FASTPATH-CAPTIVE-PORTAL-MIB::cpLocalUserEntry,,not-accessible,cpLocalUserIndex,current,,The local user entry.
.1.3.6.1.4.1.4526.10.38.1.3.2.1.1,FASTPATH-CAPTIVE-PORTAL-MIB::cpLocalUserIndex,Integer32,not-accessible,,current,,The local user entry index.
.1.3.6.1.4.1.4526.10.38.1.3.2.1.2,FASTPATH-CAPTIVE-PORTAL-MIB::cpLocalUserName,OCTET,read-write,,current,,The user name, limited to alpha-numeric strings (including the '-' and '_' characters).
.1.3.6.1.4.1.4526.10.38.1.3.2.1.3,FASTPATH-CAPTIVE-PORTAL-MIB::cpLocalUserPassword,OCTET,read-write,,current,,The user password. This object will return an empty string even if a password is set.
.1.3.6.1.4.1.4526.10.38.1.3.2.1.4,FASTPATH-CAPTIVE-PORTAL-MIB::cpLocalUserSessionTimeout,Unsigned32,read-write,,current,,The session timeout in seconds. After this limit is reached, the user is disconnected.  If this value is set to 0, the default value for the captive portal is used.
.1.3.6.1.4.1.4526.10.38.1.3.2.1.5,FASTPATH-CAPTIVE-PORTAL-MIB::cpLocalUserIdleTimeout,Unsigned32,read-write,,current,,The idle timeout of the session in seconds. After this limit is reached, the user is disconnected.  If this value is set to 0, the default value for the captive portal is used.
.1.3.6.1.4.1.4526.10.38.1.3.2.1.6,FASTPATH-CAPTIVE-PORTAL-MIB::cpLocalUserMaxBandwidthUp,Unsigned32,read-write,,current,,The maximum bandwidth up/transmit bytes per second rate of the session. After this limit has been reached the user will be disconnected. If this value is set to 0, no rate limiting is enforced.  This value is represented in bytes (however; converted & stored as bits/sec).
.1.3.6.1.4.1.4526.10.38.1.3.2.1.7,FASTPATH-CAPTIVE-PORTAL-MIB::cpLocalUserMaxBandwidthDown,Unsigned32,read-write,,current,,The maximum bandwidth down/receive bytes per second rate of the session. After this limit has been reached the user will be disconnected. If this value is set to 0, no rate limiting is enforced.  This value is represented in bytes (however; converted & stored as bits/sec).
.1.3.6.1.4.1.4526.10.38.1.3.2.1.8,FASTPATH-CAPTIVE-PORTAL-MIB::cpLocalUserMaxInputOctets,Unsigned32,read-write,,current,,The maximum input octets (bytes) allowed for the session. After this limit has been reached the user will be disconnected. If this value is set to 0, no rate limiting is enforced.  This value is represented in bytes.
.1.3.6.1.4.1.4526.10.38.1.3.2.1.9,FASTPATH-CAPTIVE-PORTAL-MIB::cpLocalUserMaxOutputOctets,Unsigned32,read-write,,current,,The maximum Output octets (bytes) allowed for the session. After this limit has been reached the user will be disconnected. If this value is set to 0, no rate limiting is enforced.  This value is represented in bytes.
.1.3.6.1.4.1.4526.10.38.1.3.2.1.10,FASTPATH-CAPTIVE-PORTAL-MIB::cpLocalUserMaxTotalOctets,Unsigned32,read-write,,current,,The maximum input/output octets (bytes) allowed for the session. After this limit has been reached the user will be disconnected. If this value is set to 0, no rate limiting is enforced.  This value is represented in bytes.
.1.3.6.1.4.1.4526.10.38.1.3.2.1.11,FASTPATH-CAPTIVE-PORTAL-MIB::cpLocalUserRowStatus,INTEGER,read-create,,current,active(1):notInService(2):notReady(3):createAndGo(4):createAndWait(5):destroy(6),The user entry status.  Supported values: active(1) - valid entry createAndGo(4) - creates a new entry destroy(6) - removes an entry
.1.3.6.1.4.1.4526.10.38.1.3.3,FASTPATH-CAPTIVE-PORTAL-MIB::cpLocalUserGroupAssociationTable,,not-accessible,,current,,The mapping of local user assignments to a user group.
.1.3.6.1.4.1.4526.10.38.1.3.3.1,FASTPATH-CAPTIVE-PORTAL-MIB::cpLocalUserGroupAssociationEntry,,not-accessible,cpLocalUserGroupAssociationUserIndex:cpLocalUserGroupAssociationGroupIndex,current,,The local user group association entry.
.1.3.6.1.4.1.4526.10.38.1.3.3.1.1,FASTPATH-CAPTIVE-PORTAL-MIB::cpLocalUserGroupAssociationUserIndex,Integer32,not-accessible,,current,,The local user entry index associated with a user group.
.1.3.6.1.4.1.4526.10.38.1.3.3.1.2,FASTPATH-CAPTIVE-PORTAL-MIB::cpLocalUserGroupAssociationGroupIndex,Integer32,not-accessible,,current,,The user group entry index associated with a local user.
.1.3.6.1.4.1.4526.10.38.1.3.3.1.3,FASTPATH-CAPTIVE-PORTAL-MIB::cpLocalUserGroupAssociationRowStatus,INTEGER,read-create,,current,active(1):notInService(2):notReady(3):createAndGo(4):createAndWait(5):destroy(6),The local user to user group association entry status.  Supported values: active(1) - valid entry createAndGo(4) - creates a new entry destroy(6) - removes an entry
.1.3.6.1.4.1.4526.10.38.1.4,FASTPATH-CAPTIVE-PORTAL-MIB::cpInterfaceAssociationGroup,,,,,,
.1.3.6.1.4.1.4526.10.38.1.4.1,FASTPATH-CAPTIVE-PORTAL-MIB::cpInterfaceAssociationTable,,not-accessible,,current,,The mapping of interface assignments to a captive portal instance.
.1.3.6.1.4.1.4526.10.38.1.4.1.1,FASTPATH-CAPTIVE-PORTAL-MIB::cpInterfaceAssociationEntry,,not-accessible,cpIntfAssociationCPID:cpIntfAssociationIfIndex,current,,The Captive Portal interface association entry.
.1.3.6.1.4.1.4526.10.38.1.4.1.1.1,FASTPATH-CAPTIVE-PORTAL-MIB::cpIntfAssociationCPID,Unsigned32,not-accessible,,current,,The Captive Portal instance identifier associated with an interface.
.1.3.6.1.4.1.4526.10.38.1.4.1.1.2,FASTPATH-CAPTIVE-PORTAL-MIB::cpIntfAssociationIfIndex,Integer32,not-accessible,,current,,The interface ifIndex to which the Captive Portal instance is associated.
.1.3.6.1.4.1.4526.10.38.1.4.1.1.3,FASTPATH-CAPTIVE-PORTAL-MIB::cpIntfAssociationRowStatus,INTEGER,read-create,,current,active(1):notInService(2):notReady(3):createAndGo(4):createAndWait(5):destroy(6),The Captive Portal instance to interface association status.  Supported values: active(1) - valid entry createAndGo(4) - creates a new entry destroy(6) - removes an entry
.1.3.6.1.4.1.4526.10.38.2,FASTPATH-CAPTIVE-PORTAL-MIB::cpStatusGroup,,,,,,
.1.3.6.1.4.1.4526.10.38.2.1,FASTPATH-CAPTIVE-PORTAL-MIB::cpCaptivePortalGlobalStatusGroup,,,,,,
.1.3.6.1.4.1.4526.10.38.2.1.1,FASTPATH-CAPTIVE-PORTAL-MIB::cpCaptivePortalOperStatus,INTEGER,read-only,,current,enablePending(0):enabled(1):disablePending(2):disabled(3),Indication of the current operational state of the captive portal feature.
.1.3.6.1.4.1.4526.10.38.2.1.2,FASTPATH-CAPTIVE-PORTAL-MIB::cpCaptivePortalOperDisabledReason,INTEGER,read-only,,current,none(0):adminDisabled(1):noIPAddress(2):noIPRoutingIntf(3):routingDisabled(4),The reason for the captive portal feature being operationally disabled.
.1.3.6.1.4.1.4526.10.38.2.1.3,FASTPATH-CAPTIVE-PORTAL-MIB::cpCaptivePortalIpv4Address,IpAddress,read-only,,current,,The IP address of this captive portal.
.1.3.6.1.4.1.4526.10.38.2.1.4,FASTPATH-CAPTIVE-PORTAL-MIB::cpCaptivePortalInstanceMaxCount,Integer32,read-only,,current,,The maximum number of captive portal instances supported by the system.
.1.3.6.1.4.1.4526.10.38.2.1.5,FASTPATH-CAPTIVE-PORTAL-MIB::cpCaptivePortalInstanceConfiguredCount,Integer32,read-only,,current,,The number of captive portal instances currently configured in the system.
.1.3.6.1.4.1.4526.10.38.2.1.6,FASTPATH-CAPTIVE-PORTAL-MIB::cpCaptivePortalInstanceActiveCount,Integer32,read-only,,current,,The number of captive portal instances currently active in the system.
.1.3.6.1.4.1.4526.10.38.2.1.7,FASTPATH-CAPTIVE-PORTAL-MIB::cpCaptivePortalAuthenUserMaxCount,Integer32,read-only,,current,,The maximum number of authenticated users that the system can support.
.1.3.6.1.4.1.4526.10.38.2.1.8,FASTPATH-CAPTIVE-PORTAL-MIB::cpCaptivePortalLocalUserMaxCount,Integer32,read-only,,current,,The maximum number of local users that the system can support.
.1.3.6.1.4.1.4526.10.38.2.1.9,FASTPATH-CAPTIVE-PORTAL-MIB::cpCaptivePortalConfiguredLocalUserCount,Integer32,read-only,,current,,The number of local users currently configured in the system.
.1.3.6.1.4.1.4526.10.38.2.1.10,FASTPATH-CAPTIVE-PORTAL-MIB::cpCaptivePortalAuthenUserCurrentCount,Integer32,read-only,,current,,The number of currently authenticated users across all captive portal instances.
.1.3.6.1.4.1.4526.10.38.2.2,FASTPATH-CAPTIVE-PORTAL-MIB::cpCaptivePortalInstanceStatusGroup,,,,,,
.1.3.6.1.4.1.4526.10.38.2.2.1,FASTPATH-CAPTIVE-PORTAL-MIB::cpCaptivePortalInstanceStatusTable,,not-accessible,,current,,This database is used to report status for a captive portal instance.
.1.3.6.1.4.1.4526.10.38.2.2.1.1,FASTPATH-CAPTIVE-PORTAL-MIB::cpCaptivePortalInstanceStatusEntry,,not-accessible,cpCaptivePortalInstanceId,current,,Captive portal instance status entry.
.1.3.6.1.4.1.4526.10.38.2.2.1.1.1,FASTPATH-CAPTIVE-PORTAL-MIB::cpCaptivePortalInstanceOperStatus,INTEGER,read-only,,current,enable(1):disable(2),Indication of the current operational state of the captive portal instance.
.1.3.6.1.4.1.4526.10.38.2.2.1.1.2,FASTPATH-CAPTIVE-PORTAL-MIB::cpCaptivePortalInstanceOperDisabledReason,INTEGER,read-only,,current,none(0):adminDisabled(1):noRadiusServer(2):noAccountingServer(3):noIntfAssociation(4):noActiveIntf(5):noValidCert(6),The reason the captive portal instance is not currently operational.
.1.3.6.1.4.1.4526.10.38.2.2.1.1.3,FASTPATH-CAPTIVE-PORTAL-MIB::cpCaptivePortalInstanceBlockStatus,INTEGER,read-write,,current,blockPending(0):blocked(1):notBlockPending(2):notBlocked(3),Block or unblock the captive portal instance for authentications.
.1.3.6.1.4.1.4526.10.38.2.2.1.1.4,FASTPATH-CAPTIVE-PORTAL-MIB::cpCaptivePortalInstanceAuthUserCount,Integer32,read-only,,current,,The number of currently authenticated users for this captive portal.
.1.3.6.1.4.1.4526.10.38.2.3,FASTPATH-CAPTIVE-PORTAL-MIB::cpCaptivePortalIntfStatusGroup,,,,,,
.1.3.6.1.4.1.4526.10.38.2.3.1,FASTPATH-CAPTIVE-PORTAL-MIB::cpCaptivePortalIntfStatusTable,,not-accessible,,current,,This database is used to report status for a captive portal instance interface.
.1.3.6.1.4.1.4526.10.38.2.3.1.1,FASTPATH-CAPTIVE-PORTAL-MIB::cpCaptivePortalIntfStatusEntry,,not-accessible,cpCaptivePortalInstanceId:cpCaptivePortalIntfIfIndex,current,,Captive portal instance interface status entry.
.1.3.6.1.4.1.4526.10.38.2.3.1.1.1,FASTPATH-CAPTIVE-PORTAL-MIB::cpCaptivePortalIntfIfIndex,Integer32,read-only,,current,,The ifIndex of the interface associated with this entry.
.1.3.6.1.4.1.4526.10.38.2.3.1.1.2,FASTPATH-CAPTIVE-PORTAL-MIB::cpCaptivePortalIntfOperStatus,INTEGER,read-only,,current,enable(1):disable(2),Indication of whether captive portal instance is active on the interface.
.1.3.6.1.4.1.4526.10.38.2.3.1.1.3,FASTPATH-CAPTIVE-PORTAL-MIB::cpCaptivePortalIntfOperDisabledReason,INTEGER,read-only,,current,none(0):intfNotAttached(1):adminDisabled(2),The reason for the captive portal instance interface not being currently operational.
.1.3.6.1.4.1.4526.10.38.2.3.1.1.4,FASTPATH-CAPTIVE-PORTAL-MIB::cpCaptivePortalIntfBlockStatus,INTEGER,read-only,,current,blocked(0):notBlocked(1),Indication of whether the captive portal instance interface is  currently blocked for authentications.
.1.3.6.1.4.1.4526.10.38.2.3.1.1.5,FASTPATH-CAPTIVE-PORTAL-MIB::cpCaptivePortalIntfAuthUserCount,Integer32,read-only,,current,,The number of currently authenticated users for this captive portal instance interface.
.1.3.6.1.4.1.4526.10.38.2.4,FASTPATH-CAPTIVE-PORTAL-MIB::cpCaptivePortalIntfDatabaseGroup,,,,,,
.1.3.6.1.4.1.4526.10.38.2.4.1,FASTPATH-CAPTIVE-PORTAL-MIB::cpCaptivePortalIntfDatabaseTable,,not-accessible,,current,,A table of definitions for interfaces that are captive portal capable.  This table identifies services that are provided on this interface.
.1.3.6.1.4.1.4526.10.38.2.4.1.1,FASTPATH-CAPTIVE-PORTAL-MIB::cpCaptivePortalIntfDatabaseEntry,,not-accessible,cpCaptivePortalIntfIfIndex,current,,
.1.3.6.1.4.1.4526.10.38.2.4.1.1.1,FASTPATH-CAPTIVE-PORTAL-MIB::cpCaptivePortalIntfCapabilities,BITS,read-only,,current,other(0):sessionTimeout(1):idleTimeout(2):maxBytesReceivedCounter(3):maxBytesTransmittedCounter(4):maxPacketsReceivedCounter(5):maxPacketsTransmittedCounter(6):clientRoaming(7),The bitmap value used to identify which capabilities are available on the interface.
.1.3.6.1.4.1.4526.10.38.2.5,FASTPATH-CAPTIVE-PORTAL-MIB::cpCaptivePortalClientStatusGroup,,,,,,
.1.3.6.1.4.1.4526.10.38.2.5.1,FASTPATH-CAPTIVE-PORTAL-MIB::cpCaptivePortalClientStatusTable,,not-accessible,,current,,This database is used to report status of authenticated clients.
.1.3.6.1.4.1.4526.10.38.2.5.1.1,FASTPATH-CAPTIVE-PORTAL-MIB::cpCaptivePortalClientStatusEntry,,not-accessible,cpCaptivePortalClientMacAddress,current,,Captive portal client status entry.
.1.3.6.1.4.1.4526.10.38.2.5.1.1.1,FASTPATH-CAPTIVE-PORTAL-MIB::cpCaptivePortalClientMacAddress,OCTET,read-only,,current,,The MAC address of the workstation from which the client is authenticated.
.1.3.6.1.4.1.4526.10.38.2.5.1.1.2,FASTPATH-CAPTIVE-PORTAL-MIB::cpCaptivePortalClientIpAddress,IpAddress,read-only,,current,,The IP address of the workstation from which the client is authenticated.
.1.3.6.1.4.1.4526.10.38.2.5.1.1.3,FASTPATH-CAPTIVE-PORTAL-MIB::cpCaptivePortalClientUserName,OCTET,read-only,,current,,User name (or Guest ID) of the connected client.
.1.3.6.1.4.1.4526.10.38.2.5.1.1.4,FASTPATH-CAPTIVE-PORTAL-MIB::cpCaptivePortalClientProtocolMode,INTEGER,read-only,,current,https(0):http(1),Protocol mode used for the client authentication.
.1.3.6.1.4.1.4526.10.38.2.5.1.1.5,FASTPATH-CAPTIVE-PORTAL-MIB::cpCaptivePortalClientVerificationMode,INTEGER,read-only,,current,guest(0):local(1):radius(2),Type of user verification performed for the client authentication.
.1.3.6.1.4.1.4526.10.38.2.5.1.1.6,FASTPATH-CAPTIVE-PORTAL-MIB::cpCaptivePortalClientAssocIfIndex,Integer32,read-only,,current,,The interface on which the client was authenticated.
.1.3.6.1.4.1.4526.10.38.2.5.1.1.7,FASTPATH-CAPTIVE-PORTAL-MIB::cpCaptivePortalClientCPID,Integer32,read-only,,current,,The captive portal instance on which the client was authenticated.
.1.3.6.1.4.1.4526.10.38.2.5.1.1.8,FASTPATH-CAPTIVE-PORTAL-MIB::cpCaptivePortalClientSessionTime,TimeTicks,read-only,,current,,The time (in seconds) since the client was authenticated.
.1.3.6.1.4.1.4526.10.38.2.5.1.1.9,FASTPATH-CAPTIVE-PORTAL-MIB::cpCaptivePortalClientSwitchMacAddress,OCTET,read-only,,current,,The MAC address of the switch to which the client is authenticated.
.1.3.6.1.4.1.4526.10.38.2.5.1.1.10,FASTPATH-CAPTIVE-PORTAL-MIB::cpCaptivePortalClientSwitchIpAddress,IpAddress,read-only,,current,,The IP address of the switch to which the client is authenticated.
.1.3.6.1.4.1.4526.10.38.2.5.1.1.11,FASTPATH-CAPTIVE-PORTAL-MIB::cpCaptivePortalClientSwitchType,INTEGER,read-only,,current,peer(1):local(2),The switch (peer or local) to which the client is authenticated.
.1.3.6.1.4.1.4526.10.38.2.5.1.1.12,FASTPATH-CAPTIVE-PORTAL-MIB::cpCaptivePortalClientDeauthAction,INTEGER,read-write,,current,none(1):start(2),This is an action object. Setting this object to start will initiate the  deauthentication of authenticated client. Read on this object will always return none.
.1.3.6.1.4.1.4526.10.38.2.5.1.1.13,FASTPATH-CAPTIVE-PORTAL-MIB::cpCaptivePortalClientAuthFailureConnectionAttempts,Integer32,read-only,,current,,The captive portal authentication failure count.
.1.3.6.1.4.1.4526.10.38.2.5.2,FASTPATH-CAPTIVE-PORTAL-MIB::cpCaptivePortalClientStatisticsTable,,not-accessible,,current,,A table of statistics for each active session.
.1.3.6.1.4.1.4526.10.38.2.5.2.1,FASTPATH-CAPTIVE-PORTAL-MIB::cpCaptivePortalClientStatisticsEntry,,not-accessible,,current,,Captive portal client statistics entry.
.1.3.6.1.4.1.4526.10.38.2.5.2.1.1,FASTPATH-CAPTIVE-PORTAL-MIB::cpCaptivePortalClientBytesReceived,Counter64,read-only,,current,,Number of bytes received by this client.
.1.3.6.1.4.1.4526.10.38.2.5.2.1.2,FASTPATH-CAPTIVE-PORTAL-MIB::cpCaptivePortalClientBytesTransmitted,Counter64,read-only,,current,,Number of bytes transmitted by this client.
.1.3.6.1.4.1.4526.10.38.2.5.2.1.3,FASTPATH-CAPTIVE-PORTAL-MIB::cpCaptivePortalClientPacketsReceived,Counter64,read-only,,current,,Number of packets received by this client.
.1.3.6.1.4.1.4526.10.38.2.5.2.1.4,FASTPATH-CAPTIVE-PORTAL-MIB::cpCaptivePortalClientPacketsTransmitted,Counter64,read-only,,current,,Number of packets transmitted by this client.
.1.3.6.1.4.1.4526.10.38.2.6,FASTPATH-CAPTIVE-PORTAL-MIB::cpCaptivePortalIntfClientAssocGroup,,,,,,
.1.3.6.1.4.1.4526.10.38.2.6.1,FASTPATH-CAPTIVE-PORTAL-MIB::cpCaptivePortalIntfClientAssocTable,,not-accessible,,current,,This database is used to report clients associated with a particular captive portal interface.
.1.3.6.1.4.1.4526.10.38.2.6.1.1,FASTPATH-CAPTIVE-PORTAL-MIB::cpCaptivePortalIntfClientAssocEntry,,not-accessible,cpCaptivePortalIntfClientIfIndex:cpCaptivePortalIntfClientAssocMacAddress,current,,Captive portal interface client status entry.
.1.3.6.1.4.1.4526.10.38.2.6.1.1.1,FASTPATH-CAPTIVE-PORTAL-MIB::cpCaptivePortalIntfClientIfIndex,Integer32,read-only,,current,,The interface on which the client was authenticated.
.1.3.6.1.4.1.4526.10.38.2.6.1.1.2,FASTPATH-CAPTIVE-PORTAL-MIB::cpCaptivePortalIntfClientAssocMacAddress,OCTET,read-only,,current,,The MAC address of the workstation from which the client is authenticated.
.1.3.6.1.4.1.4526.10.38.2.6.1.1.3,FASTPATH-CAPTIVE-PORTAL-MIB::cpCaptivePortalIntfClientAssocRowStatus,INTEGER,read-only,,current,active(1):notInService(2):notReady(3):createAndGo(4):createAndWait(5):destroy(6),This specifies the row-status of this entry. For a valid entry,  the row-status will return active(1). This is the only supported value.
.1.3.6.1.4.1.4526.10.38.2.7,FASTPATH-CAPTIVE-PORTAL-MIB::cpCaptivePortalInstanceClientAssocGroup,,,,,,
.1.3.6.1.4.1.4526.10.38.2.7.1,FASTPATH-CAPTIVE-PORTAL-MIB::cpCaptivePortalInstanceClientAssocTable,,not-accessible,,current,,This database is used to report clients associated with a particular captive portal instance.
.1.3.6.1.4.1.4526.10.38.2.7.1.1,FASTPATH-CAPTIVE-PORTAL-MIB::cpCaptivePortalInstanceClientAssocEntry,,not-accessible,cpCaptivePortalInstanceClientAssocInstanceId:cpCaptivePortalInstanceClientAssocMacAddress,current,,Captive Portal instance client status entry.
.1.3.6.1.4.1.4526.10.38.2.7.1.1.1,FASTPATH-CAPTIVE-PORTAL-MIB::cpCaptivePortalInstanceClientAssocInstanceId,Integer32,read-only,,current,,The instance ID associated with this client.
.1.3.6.1.4.1.4526.10.38.2.7.1.1.2,FASTPATH-CAPTIVE-PORTAL-MIB::cpCaptivePortalInstanceClientAssocMacAddress,OCTET,read-only,,current,,The MAC address of the workstation from which the client is authenticated.
.1.3.6.1.4.1.4526.10.38.2.7.1.1.3,FASTPATH-CAPTIVE-PORTAL-MIB::cpCaptivePortalInstanceClientAssocRowStatus,INTEGER,read-only,,current,active(1):notInService(2):notReady(3):createAndGo(4):createAndWait(5):destroy(6),This specifies the row-status of this entry. For a valid entry,  the row-status will return active(1). This is the only supported value.
.1.3.6.1.4.1.4526.10.38.3,FASTPATH-CAPTIVE-PORTAL-MIB::cpTrapsConfig,,,,,,
.1.3.6.1.4.1.4526.10.38.3.1,FASTPATH-CAPTIVE-PORTAL-MIB::cpTrapMode,INTEGER,read-write,,current,enable(1):disable(2),Flag to enable/disable following Captive Portal SNMP traps: Client Authentication Failures, Client Connections, Client Database Full, Client Disconnections.
.1.3.6.1.4.1.4526.10.38.3.2,FASTPATH-CAPTIVE-PORTAL-MIB::cpClientAuthenticationFailureTrapMode,INTEGER,read-write,,current,enable(1):disable(2),Flag to enable/disable client authentication failure SNMP traps.
.1.3.6.1.4.1.4526.10.38.3.3,FASTPATH-CAPTIVE-PORTAL-MIB::cpClientConnectTrapMode,INTEGER,read-write,,current,enable(1):disable(2),Flag to enable/disable client connection SNMP traps.
.1.3.6.1.4.1.4526.10.38.3.4,FASTPATH-CAPTIVE-PORTAL-MIB::cpClientDatabaseFullTrapMode,INTEGER,read-write,,current,enable(1):disable(2),Flag to enable/disable client database full SNMP traps.
.1.3.6.1.4.1.4526.10.38.3.5,FASTPATH-CAPTIVE-PORTAL-MIB::cpClientDisconnectTrapMode,INTEGER,read-write,,current,enable(1):disable(2),Flag to enable/disable client disconnection SNMP traps.
.1.3.6.1.4.1.4526.10.38.4,FASTPATH-CAPTIVE-PORTAL-MIB::cpTraps,,,,,,
.1.3.6.1.4.1.4526.10.38.4.1,FASTPATH-CAPTIVE-PORTAL-MIB::cpClientAuthenticationFailure,,,,,,A cpClientAuthenticationFailure trap signifies that the SNMP entity,  acting in an agent role, has detected a client authentication failure.
.1.3.6.1.4.1.4526.10.38.4.2,FASTPATH-CAPTIVE-PORTAL-MIB::cpClientConnect,,,,,,A cpClientConnect trap signifies that the SNMP entity,  acting in an agent role, has detected a client connection.
.1.3.6.1.4.1.4526.10.38.4.3,FASTPATH-CAPTIVE-PORTAL-MIB::cpClientDatabaseFull,,,,,,A cpClientDatabaseFull trap signifies that the SNMP entity,  acting in an agent role, has detected that client authentication database is full.
.1.3.6.1.4.1.4526.10.38.4.4,FASTPATH-CAPTIVE-PORTAL-MIB::cpClientDisconnect,,,,,,A cpClientDisconnect trap signifies that the SNMP entity,  acting in an agent role, has detected a client disconnection.
.1.3.6.1.4.1.4526.10.39,FASTPATH-ISDP-MIB::fastPathIsdp,,,,,,The NETGEAR Private MIB for FastPath ISDP
.1.3.6.1.4.1.4526.10.39.1,FASTPATH-ISDP-MIB::agentIsdpMIBObjects,,,,,,
.1.3.6.1.4.1.4526.10.39.1.1,FASTPATH-ISDP-MIB::agentIsdpGlobal,,,,,,
.1.3.6.1.4.1.4526.10.39.1.1.1,FASTPATH-ISDP-MIB::agentIsdpClear,,,,,,
.1.3.6.1.4.1.4526.10.39.1.1.1.1,FASTPATH-ISDP-MIB::agentIsdpClearStats,INTEGER,read-write,,current,clear(1),Clear ISDP stats.
.1.3.6.1.4.1.4526.10.39.1.1.1.2,FASTPATH-ISDP-MIB::agentIsdpClearEntries,INTEGER,read-write,,current,clear(1),Clear ISDP entries table.
.1.3.6.1.4.1.4526.10.39.1.1.2,FASTPATH-ISDP-MIB::agentIsdpStatistics,,,,,,
.1.3.6.1.4.1.4526.10.39.1.1.2.1,FASTPATH-ISDP-MIB::agentIsdpStatisticsPduReceived,Counter32,read-only,,current,,Display the number of all ISDP pdu received.
.1.3.6.1.4.1.4526.10.39.1.1.2.2,FASTPATH-ISDP-MIB::agentIsdpStatisticsPduTransmit,Counter32,read-only,,current,,Display the number of all ISDP pdu transmitted.
.1.3.6.1.4.1.4526.10.39.1.1.2.3,FASTPATH-ISDP-MIB::agentIsdpStatisticsV1PduReceived,Counter32,read-only,,current,,Display the number of v1 ISDP pdu received.
.1.3.6.1.4.1.4526.10.39.1.1.2.4,FASTPATH-ISDP-MIB::agentIsdpStatisticsV1PduTransmit,Counter32,read-only,,current,,Display the number of v1 ISDP pdu transmitted.
.1.3.6.1.4.1.4526.10.39.1.1.2.5,FASTPATH-ISDP-MIB::agentIsdpStatisticsV2PduReceived,Counter32,read-only,,current,,Display the number of v2 ISDP pdu received.
.1.3.6.1.4.1.4526.10.39.1.1.2.6,FASTPATH-ISDP-MIB::agentIsdpStatisticsV2PduTransmit,Counter32,read-only,,current,,Display the number of v2 ISDP pdu transmitted.
.1.3.6.1.4.1.4526.10.39.1.1.2.7,FASTPATH-ISDP-MIB::agentIsdpStatisticsBadHeaderPduReceived,Counter32,read-only,,current,,Display the number of ISDP pdu with bad header received.
.1.3.6.1.4.1.4526.10.39.1.1.2.8,FASTPATH-ISDP-MIB::agentIsdpStatisticsChkSumErrorPduReceived,Counter32,read-only,,current,,Display the number of ISDP pdu with chksum error received.
.1.3.6.1.4.1.4526.10.39.1.1.2.9,FASTPATH-ISDP-MIB::agentIsdpStatisticsFailurePduTransmit,Counter32,read-only,,current,,Display the number of ISDP pdu transmition failures.
.1.3.6.1.4.1.4526.10.39.1.1.2.10,FASTPATH-ISDP-MIB::agentIsdpStatisticsInvalidFormatPduReceived,Counter32,read-only,,current,,Display the number of ISDP pdu in invalid format received.
.1.3.6.1.4.1.4526.10.39.1.1.2.11,FASTPATH-ISDP-MIB::agentIsdpStatisticsTableFull,Counter32,read-only,,current,,Display the number of ISDP entry table was full.
.1.3.6.1.4.1.4526.10.39.1.1.2.12,FASTPATH-ISDP-MIB::agentIsdpStatisticsIpAddressTableFull,Counter32,read-only,,current,,Display the number of ISDP entry address table was full.
.1.3.6.1.4.1.4526.10.39.1.1.4,FASTPATH-ISDP-MIB::agentIsdpGlobalRun,INTEGER,read-write,,current,enable(1):disable(0),An indication of whether the Indastry Standart Discovery Protocol is currently running. Entries in agentIsdpCacheTable are deleted when ISDP is disabled.
.1.3.6.1.4.1.4526.10.39.1.1.5,FASTPATH-ISDP-MIB::agentIsdpGlobalMessageInterval,INTEGER,read-write,,current,,The interval at which ISDP messages are to be generated. The default value is 60 seconds. This is also known as the ISDP timer.
.1.3.6.1.4.1.4526.10.39.1.1.6,FASTPATH-ISDP-MIB::agentIsdpGlobalHoldTime,INTEGER,read-write,,current,,The time for the receiving device holds ISDP message. The default value is 180 seconds.
.1.3.6.1.4.1.4526.10.39.1.1.7,FASTPATH-ISDP-MIB::agentIsdpGlobalDeviceId,OCTET,read-only,,current,,The device ID advertised by this device. The format of this device ID is characterized by the value of agentIsdpGlobalDeviceIdFormat object.
.1.3.6.1.4.1.4526.10.39.1.1.8,FASTPATH-ISDP-MIB::agentIsdpGlobalAdvertiseV2,INTEGER,read-write,,current,enable(1):disable(0),An indication of whether the Indastry Standart Discovery Protocol V2 is currently enabled.
.1.3.6.1.4.1.4526.10.39.1.1.9,FASTPATH-ISDP-MIB::agentIsdpGlobalDeviceIdFormatCpb,BITS,read-only,,current,serialNumber(1):macAddress(2):other(4),Indicate the Device ID format capability of the device. serialNumber(0) indicates that the device supports using serial number as the format for its Device ID. macAddress(1) indicates that the device supports using layer 2 MAC address as the format for its Device ID. other(2) indicates that the device supports using its platform specific format as the format for its Device ID.
.1.3.6.1.4.1.4526.10.39.1.1.10,FASTPATH-ISDP-MIB::agentIsdpGlobalDeviceIdFormat,INTEGER,read-only,,current,serialNumber(1):macAddress(2):other(3),An indication of the format of Device ID contained in the corresponding instance of agentIsdpGlobalDeviceId. User can only specify the formats which the device is capable of as denoted in agentIsdpGlobalDeviceIdFormatCpb object.  serialNumber(1) indicates that the value of agentIsdpGlobalDeviceId  object is in the form of an ASCII string contain the device serial number.   macAddress(2) indicates that the value of agentIsdpGlobalDeviceId  object is in the form of Layer 2 MAC address. other(3) indicates that the value of agentIsdpGlobalDeviceId object is in the form of a platform specific ASCII string contain info that identifies the device. For example: ASCII string contains serialNumber appended/prepened with system name.
.1.3.6.1.4.1.4526.10.39.1.2,FASTPATH-ISDP-MIB::agentIsdpCache,,,,,,
.1.3.6.1.4.1.4526.10.39.1.2.1,FASTPATH-ISDP-MIB::agentIsdpCacheTable,,not-accessible,,current,,The (conceptual) table containing the cached information obtained via receiving ISDP messages.
.1.3.6.1.4.1.4526.10.39.1.2.1.1,FASTPATH-ISDP-MIB::agentIsdpCacheEntry,,not-accessible,agentIsdpCacheIfIndex:agentIsdpCacheIndex,current,,An entry (conceptual row) in the agentIsdpCacheTable, containing the information received via ISDP on one interface from one device. Entries appear when a ISDP advertisement is received from a neighbor device. Entries disappear when ISDP is disabled on the interface, or globally.
.1.3.6.1.4.1.4526.10.39.1.2.1.1.1,FASTPATH-ISDP-MIB::agentIsdpCacheIfIndex,Integer32,not-accessible,,current,,Normally, the ifIndex value of the local interface.
.1.3.6.1.4.1.4526.10.39.1.2.1.1.2,FASTPATH-ISDP-MIB::agentIsdpCacheIndex,Integer32,not-accessible,,current,,Index value is unique integer id of each neighbor entry.
.1.3.6.1.4.1.4526.10.39.1.2.1.1.3,FASTPATH-ISDP-MIB::agentIsdpCacheAddress,OCTET,read-only,,current,,The (first) network-layer address of the device's SNMP-agent as reported in the Address TLV of the most recently received ISDP message. For example, if the corresponding instance of cacheAddressType had the value 'ip(1)', then this object would be an IP-address.
.1.3.6.1.4.1.4526.10.39.1.2.1.1.4,FASTPATH-ISDP-MIB::agentIsdpCacheLocalIntf,OCTET,read-only,,current,,The device Interface which had this neighbor.
.1.3.6.1.4.1.4526.10.39.1.2.1.1.5,FASTPATH-ISDP-MIB::agentIsdpCacheVersion,OCTET,read-only,,current,,The Version string as reported in the most recent ISDP message. The zero-length string indicates that no Version field (TLV) was reported in the most recent ISDP message.
.1.3.6.1.4.1.4526.10.39.1.2.1.1.6,FASTPATH-ISDP-MIB::agentIsdpCacheDeviceId,OCTET,read-only,,current,,The Device-ID string as reported in the most recent ISDP message. The zero-length string indicates that no Device-ID field (TLV) was reported in the most recent ISDP message.
.1.3.6.1.4.1.4526.10.39.1.2.1.1.7,FASTPATH-ISDP-MIB::agentIsdpCacheDevicePort,OCTET,read-only,,current,,The Port-ID string as reported in the most recent ISDP message. This will typically be the value of the ifName object (e.g., 'Ethernet0'). The zero-length string indicates that no Port-ID field (TLV) was reported in the most recent ISDP message.
.1.3.6.1.4.1.4526.10.39.1.2.1.1.8,FASTPATH-ISDP-MIB::agentIsdpCachePlatform,OCTET,read-only,,current,,The Device's Hardware Platform as reported in the most recent ISDP message. The zero-length string indicates that no Platform field (TLV) was reported in the most recent ISDP message.
.1.3.6.1.4.1.4526.10.39.1.2.1.1.9,FASTPATH-ISDP-MIB::agentIsdpCacheCapabilities,OCTET,read-only,,current,,The Device's Functional Capabilities as reported in the most recent ISDP message. For latest set of specific values, see the latest version of the ISDP specification. The zero-length string indicates that no Capabilities field (TLV) was reported in the most recent ISDP message.
.1.3.6.1.4.1.4526.10.39.1.2.1.1.10,FASTPATH-ISDP-MIB::agentIsdpCacheLastChange,TimeTicks,read-only,,current,,Indicates the time when this cache entry was last changed. This object is initialised to the current time when the entry gets created and updated to the current time whenever the value of any (other) object instance in the corresponding row is modified.
.1.3.6.1.4.1.4526.10.39.1.2.1.1.11,FASTPATH-ISDP-MIB::agentIsdpCacheProtocolVersion,OCTET,read-only,,current,,The Device's version of ISDP protcol as reported in the most recent ISDP message.
.1.3.6.1.4.1.4526.10.39.1.2.1.1.12,FASTPATH-ISDP-MIB::agentIsdpCacheHoldtime,INTEGER,read-only,,current,,The Device's ISDP Holdtime as reported in the most recent ISDP message.
.1.3.6.1.4.1.4526.10.39.1.3,FASTPATH-ISDP-MIB::agentIsdpInterface,,,,,,
.1.3.6.1.4.1.4526.10.39.1.3.1,FASTPATH-ISDP-MIB::agentIsdpInterfaceTable,,not-accessible,,current,,The (conceptual) table containing the status of ISDP on the device's interfaces.
.1.3.6.1.4.1.4526.10.39.1.3.1.1,FASTPATH-ISDP-MIB::agentIsdpInterfaceEntry,,not-accessible,agentIsdpInterfaceIfIndex,current,,An entry (conceptual row) in the agentIsdpInterfaceTable, containing the status of ISDP on an interface.
.1.3.6.1.4.1.4526.10.39.1.3.1.1.1,FASTPATH-ISDP-MIB::agentIsdpInterfaceIfIndex,Integer32,not-accessible,,current,,The ifIndex value of the local interface. For 802.3 Repeaters on which the repeater ports do not have ifIndex values assigned, this value is a unique value for the port, and greater than any ifIndex value supported by the repeater; in this case, the specific port is indicated by corresponding values of agentIsdpInterfaceGroup and agentIsdpInterfacePort, where these values correspond to the group number and port number values of RFC 1516.
.1.3.6.1.4.1.4526.10.39.1.3.1.1.2,FASTPATH-ISDP-MIB::agentIsdpInterfaceEnable,INTEGER,read-write,,current,enable(1):disable(0),An indication of whether the Industry Standard Discovery Protocol is currently running on this interface. This variable has no effect when ISDP is disabled (agentIsdpGlobalRun = FALSE).
.1.3.6.1.4.1.4526.10.42,FASTPATH-TIMEZONE-PRIVATE-MIB::fastPathTimeZonePrivate,,,,,,The NETGEAR Private MIB for FASTPATH for system time, timezone and summer-time settings
.1.3.6.1.4.1.4526.10.42.1,FASTPATH-TIMEZONE-PRIVATE-MIB::agentSystemTimeGroup,,,,,,
.1.3.6.1.4.1.4526.10.42.1.1,FASTPATH-TIMEZONE-PRIVATE-MIB::agentSystemTime,OCTET,read-only,,current,,the current sytem time (includes the TimeZone offset and summertime Offset)
.1.3.6.1.4.1.4526.10.42.1.2,FASTPATH-TIMEZONE-PRIVATE-MIB::agentSystemDate,OCTET,read-only,,current,,the current sytem date 
.1.3.6.1.4.1.4526.10.42.1.3,FASTPATH-TIMEZONE-PRIVATE-MIB::agentSystemTimeZoneAcronym,OCTET,read-only,,current,,the zone acronym of summertime when summertime is in effect If summer-time is not in effect or if there is no acronym for summer-time it defaults  To TimeZone acronym.
.1.3.6.1.4.1.4526.10.42.1.4,FASTPATH-TIMEZONE-PRIVATE-MIB::agentSystemTimeSource,INTEGER,read-only,,current,none(0):sntp(1),the time source from which the time update is taken.
.1.3.6.1.4.1.4526.10.42.1.5,FASTPATH-TIMEZONE-PRIVATE-MIB::agentSystemSummerTimeState,INTEGER,read-only,,current,enabled(1):disabled(0),enabled : summer-time is in effect currently disabled : summer-time is not in effect currently
.1.3.6.1.4.1.4526.10.42.2,FASTPATH-TIMEZONE-PRIVATE-MIB::agentTimeZoneGroup,,,,,,
.1.3.6.1.4.1.4526.10.42.2.1,FASTPATH-TIMEZONE-PRIVATE-MIB::agentTimeZoneHoursOffset,Integer32,read-write,,current,,the hours to be added to the UTC time
.1.3.6.1.4.1.4526.10.42.2.2,FASTPATH-TIMEZONE-PRIVATE-MIB::agentTimeZoneMinutesOffset,Integer32,read-write,,current,,the minutes to be added to the UTC time.
.1.3.6.1.4.1.4526.10.42.2.3,FASTPATH-TIMEZONE-PRIVATE-MIB::agentTimeZoneAcronym,OCTET,read-write,,current,,the acronym associated with the zone.
.1.3.6.1.4.1.4526.10.42.3,FASTPATH-TIMEZONE-PRIVATE-MIB::agentSummerTimeGroup,,,,,,
.1.3.6.1.4.1.4526.10.42.3.1,FASTPATH-TIMEZONE-PRIVATE-MIB::agentSummerTimeMode,INTEGER,read-write,,current,noSummertime(0):recurring(1):recurringEu(2):recurringUsa(3):nonrecurring(4),recurring- set the parameters for recurring summer-time non-recurring- set the parameters for non-recurring summer-time no-summertime- disable the summer-time 
.1.3.6.1.4.1.4526.10.42.3.2,FASTPATH-TIMEZONE-PRIVATE-MIB::agentSummerTimeRecurringGroup,,,,,,
.1.3.6.1.4.1.4526.10.42.3.2.1,FASTPATH-TIMEZONE-PRIVATE-MIB::agentStRecurringStartingWeek,INTEGER,read-write,,current,none(0):first(1):second(2):third(3):fourth(4):last(5),the week of the month from which the summer-time should be effective.
.1.3.6.1.4.1.4526.10.42.3.2.2,FASTPATH-TIMEZONE-PRIVATE-MIB::agentStRecurringStartingDay,INTEGER,read-write,,current,none(0):sun(1):mon(2):tue(3):wed(4):thu(5):fri(6):sat(7),the day of the agentStRecurringStartingWeek from  which the summer-time should be effective.
.1.3.6.1.4.1.4526.10.42.3.2.3,FASTPATH-TIMEZONE-PRIVATE-MIB::agentStRecurringStartingMonth,INTEGER,read-write,,current,none(0):jan(1):feb(2):mar(3):apr(4):may(5):jun(6):jul(7):aug(8):sep(9):oct(10):nov(11):dec(12),the month of the year from which the  summer-time should be effective.
.1.3.6.1.4.1.4526.10.42.3.2.4,FASTPATH-TIMEZONE-PRIVATE-MIB::agentStRecurringStartingTime,OCTET,read-write,,current,,the time in the hh:mm format from  which the summer-time should be effective. range for hh: 0 to 23 range for mm: 0 to 59 
.1.3.6.1.4.1.4526.10.42.3.2.5,FASTPATH-TIMEZONE-PRIVATE-MIB::agentStRecurringEndingWeek,INTEGER,read-write,,current,none(0):first(1):second(2):third(3):fourth(4):last(5),the week of the Month in which the  summer-time should end.
.1.3.6.1.4.1.4526.10.42.3.2.6,FASTPATH-TIMEZONE-PRIVATE-MIB::agentStRecurringEndingDay,INTEGER,read-write,,current,none(0):sun(1):mon(2):tue(3):wed(4):thu(5):fri(6):sat(7),the day of the agentStRecurringStartingWeek on which the  summer-time should end.
.1.3.6.1.4.1.4526.10.42.3.2.7,FASTPATH-TIMEZONE-PRIVATE-MIB::agentStRecurringEndingMonth,INTEGER,read-write,,current,none(0):jan(1):feb(2):mar(3):apr(4):may(5):jun(6):jul(7):aug(8):sep(9):oct(10):nov(11):dec(12),the month of the year in which the summer-time should end.
.1.3.6.1.4.1.4526.10.42.3.2.8,FASTPATH-TIMEZONE-PRIVATE-MIB::agentStRecurringEndingTime,OCTET,read-write,,current,,the time of the agentStRecurringEndingDay in hh:mm format at which the summer-time should end. range for hh: 0 to 23 range for mm: 0 to 59
.1.3.6.1.4.1.4526.10.42.3.2.9,FASTPATH-TIMEZONE-PRIVATE-MIB::agentStRecurringZoneAcronym,OCTET,read-write,,current,,the zone associated with the summer-time  recurring configuration. the acronym maximum legth is 4 characters
.1.3.6.1.4.1.4526.10.42.3.2.10,FASTPATH-TIMEZONE-PRIVATE-MIB::agentStRecurringZoneOffset,Integer32,read-write,,current,,the zone offset in minutes which will be added to the UTC time  during the summer-time of every year.
.1.3.6.1.4.1.4526.10.42.3.3,FASTPATH-TIMEZONE-PRIVATE-MIB::agentSummerTimeNonRecurringGroup,,,,,,
.1.3.6.1.4.1.4526.10.42.3.3.1,FASTPATH-TIMEZONE-PRIVATE-MIB::agentStNonRecurringStartingDay,Integer32,read-write,,current,,the day of the agentStNonRecurringStartingMonth from  which the summer-time should be effective.
.1.3.6.1.4.1.4526.10.42.3.3.2,FASTPATH-TIMEZONE-PRIVATE-MIB::agentStNonRecurringStartingMonth,INTEGER,read-write,,current,none(0):jan(1):feb(2):mar(3):apr(4):may(5):jun(6):jul(7):aug(8):sep(9):oct(10):nov(11):dec(12),the Month of the agentStNonRecurringStartingYear from  which the summer-time should be effective.
.1.3.6.1.4.1.4526.10.42.3.3.3,FASTPATH-TIMEZONE-PRIVATE-MIB::agentStNonRecurringStartingYear,Integer32,read-write,,current,,the year from which the summer-time should be effective.
.1.3.6.1.4.1.4526.10.42.3.3.4,FASTPATH-TIMEZONE-PRIVATE-MIB::agentStNonRecurringStartingTime,OCTET,read-write,,current,,the time in the hh:mm format. The time of agentStNonRecurringStartingDay  from which the summer-time should be effective. range for hh: 0 to 23 range for mm: 0 to 59
.1.3.6.1.4.1.4526.10.42.3.3.5,FASTPATH-TIMEZONE-PRIVATE-MIB::agentStNonRecurringEndingDay,Integer32,read-write,,current,,the day of the agentStNonRecurringEndingMonth on  which the summer-time should end.
.1.3.6.1.4.1.4526.10.42.3.3.6,FASTPATH-TIMEZONE-PRIVATE-MIB::agentStNonRecurringEndingMonth,INTEGER,read-write,,current,none(0):jan(1):feb(2):mar(3):apr(4):may(5):jun(6):jul(7):aug(8):sep(9):oct(10):nov(11):dec(12),the month of the agentStNonRecurringEndingYear in which  the summer-time should end.
.1.3.6.1.4.1.4526.10.42.3.3.7,FASTPATH-TIMEZONE-PRIVATE-MIB::agentStNonRecurringEndingYear,Integer32,read-write,,current,,the year in which the summer-time should end.
.1.3.6.1.4.1.4526.10.42.3.3.8,FASTPATH-TIMEZONE-PRIVATE-MIB::agentStNonRecurringEndingTime,OCTET,read-write,,current,,the time on the agentStNonRecurringEndingDay in hh:mm format at which the summer-time should end. range for hh: 0 to 23 range for mm: 0 to 59
.1.3.6.1.4.1.4526.10.42.3.3.9,FASTPATH-TIMEZONE-PRIVATE-MIB::agentStNonRecurringZoneOffset,Integer32,read-write,,current,,the zone offset in minutes which will be added to  the UTC time during the summer-time.
.1.3.6.1.4.1.4526.10.42.3.3.10,FASTPATH-TIMEZONE-PRIVATE-MIB::agentStNonRecurringZoneAcronym,OCTET,read-write,,current,,the zone associated with the summer-time  non recurring configuration. the acronym maximum legth is 4 characters
.1.3.6.1.4.1.4526.10.43,FASTPATH-BOXSERVICES-PRIVATE-MIB::fastPathBoxServices,,,,,,The NETGEAR Private MIB for FASTPATH Box Services Feature.
.1.3.6.1.4.1.4526.10.43.0,FASTPATH-BOXSERVICES-PRIVATE-MIB::fastPathBoxServicesTraps,,,,,,
.1.3.6.1.4.1.4526.10.43.0.1,FASTPATH-BOXSERVICES-PRIVATE-MIB::boxsFanStateChange,,,,,,Trap is sent when fan state change happens.
.1.3.6.1.4.1.4526.10.43.0.2,FASTPATH-BOXSERVICES-PRIVATE-MIB::boxsPowSupplyStateChange,,,,,,Trap is sent when power supply state change happens.
.1.3.6.1.4.1.4526.10.43.0.3,FASTPATH-BOXSERVICES-PRIVATE-MIB::boxsTemperatureChange,,,,,,Trap is sent when temperature is changing and crossing any of the thresholds
.1.3.6.1.4.1.4526.10.43.1,FASTPATH-BOXSERVICES-PRIVATE-MIB::boxServicesGroup,,,,,,
.1.3.6.1.4.1.4526.10.43.1.1,FASTPATH-BOXSERVICES-PRIVATE-MIB::boxServicesNormalTempRangeMin,INTEGER,read-write,,current,, Lower boundary of normal temperature range.
.1.3.6.1.4.1.4526.10.43.1.2,FASTPATH-BOXSERVICES-PRIVATE-MIB::boxServicesNormalTempRangeMax,INTEGER,read-write,,current,, Upper boundary of normal temperature range.
.1.3.6.1.4.1.4526.10.43.1.3,FASTPATH-BOXSERVICES-PRIVATE-MIB::boxServicesTemperatureTrapEnable,INTEGER,read-write,,current,enable(1):disable(2), Enable or disable temperature change event trap, raised when temperature crosses boundaries of normal range
.1.3.6.1.4.1.4526.10.43.1.4,FASTPATH-BOXSERVICES-PRIVATE-MIB::boxServicesPSMStateTrapEnable,INTEGER,read-write,,current,enable(1):disable(2), Enable or disable Power Supply Module state change trap.
.1.3.6.1.4.1.4526.10.43.1.5,FASTPATH-BOXSERVICES-PRIVATE-MIB::boxServicesFanStateTrapEnable,INTEGER,read-write,,current,enable(1):disable(2), Enable or disable Fan state change trap.
.1.3.6.1.4.1.4526.10.43.1.6,FASTPATH-BOXSERVICES-PRIVATE-MIB::boxServicesFansTable,,not-accessible,,current,,Fan
.1.3.6.1.4.1.4526.10.43.1.6.1,FASTPATH-BOXSERVICES-PRIVATE-MIB::boxServicesFansEntry,,not-accessible,boxServicesFansIndex,current,,Box Services Fan Entry
.1.3.6.1.4.1.4526.10.43.1.6.1.1,FASTPATH-BOXSERVICES-PRIVATE-MIB::boxServicesFansIndex,Integer32,read-only,,current,,Unique index of fan table entry
.1.3.6.1.4.1.4526.10.43.1.6.1.2,FASTPATH-BOXSERVICES-PRIVATE-MIB::boxServicesFanItemType,INTEGER,read-only,,current,fixed(1):removable(2),The type of fan
.1.3.6.1.4.1.4526.10.43.1.6.1.3,FASTPATH-BOXSERVICES-PRIVATE-MIB::boxServicesFanItemState,INTEGER,read-only,,current,operational(1):failed(2):powering(3):notpowering(4):notpresent(5),The status of fan
.1.3.6.1.4.1.4526.10.43.1.6.1.4,FASTPATH-BOXSERVICES-PRIVATE-MIB::boxServicesFanSpeed,Integer32,read-only,,current,,The speed of fan
.1.3.6.1.4.1.4526.10.43.1.6.1.5,FASTPATH-BOXSERVICES-PRIVATE-MIB::boxServicesFanDutyLevel,Integer32,read-only,,current,,The duty level of fan, in percents
.1.3.6.1.4.1.4526.10.43.1.7,FASTPATH-BOXSERVICES-PRIVATE-MIB::boxServicesPowSuppliesTable,,not-accessible,,current,,Power supply
.1.3.6.1.4.1.4526.10.43.1.7.1,FASTPATH-BOXSERVICES-PRIVATE-MIB::boxServicesPowSuppliesEntry,,not-accessible,boxServicesPowSupplyIndex,current,,Box Services Power Supply Entry
.1.3.6.1.4.1.4526.10.43.1.7.1.1,FASTPATH-BOXSERVICES-PRIVATE-MIB::boxServicesPowSupplyIndex,Integer32,read-only,,current,,Unique index of power supply table entry
.1.3.6.1.4.1.4526.10.43.1.7.1.2,FASTPATH-BOXSERVICES-PRIVATE-MIB::boxServicesPowSupplyItemType,INTEGER,read-only,,current,fixed(1):removable(2),The type of power supply
.1.3.6.1.4.1.4526.10.43.1.7.1.3,FASTPATH-BOXSERVICES-PRIVATE-MIB::boxServicesPowSupplyItemState,INTEGER,read-only,,current,operational(1):failed(2):powering(3):notpowering(4):notpresent(5),The status of power supply
.1.3.6.1.4.1.4526.10.43.1.8,FASTPATH-BOXSERVICES-PRIVATE-MIB::boxServicesTempSensorsTable,,not-accessible,,current,,Temperature sensor
.1.3.6.1.4.1.4526.10.43.1.8.1,FASTPATH-BOXSERVICES-PRIVATE-MIB::boxServicesTempSensorsEntry,,not-accessible,boxServicesTempSensorIndex,current,,Box Services Temperature Sensor Entry
.1.3.6.1.4.1.4526.10.43.1.8.1.1,FASTPATH-BOXSERVICES-PRIVATE-MIB::boxServicesTempSensorIndex,Integer32,read-only,,current,,Unique index of temperature sensor table entry
.1.3.6.1.4.1.4526.10.43.1.8.1.2,FASTPATH-BOXSERVICES-PRIVATE-MIB::boxServicesTempSensorType,INTEGER,read-only,,current,fixed(1):removable(2),The type of temperature sensor
.1.3.6.1.4.1.4526.10.43.1.8.1.3,FASTPATH-BOXSERVICES-PRIVATE-MIB::boxServicesTempSensorState,INTEGER,read-only,,current,normal(1):warning(2):critical(3):shutdown(4):notpresent(5):notoperational(6),The state of temperature sensor
.1.3.6.1.4.1.4526.10.43.1.8.1.4,FASTPATH-BOXSERVICES-PRIVATE-MIB::boxServicesTempSensorTemperature,Integer32,read-only,,current,,The temperature value reported by sensor
.1.3.6.1.4.1.4526.10.43.1.9,FASTPATH-BOXSERVICES-PRIVATE-MIB::boxServicesCPLDCodeVersion,Integer32,read-only,,current,,The CPLD code version of the unit.
.1.3.6.1.4.1.4526.10.43.2,FASTPATH-BOXSERVICES-PRIVATE-MIB::boxServicesNotificationsGroup,,,,,,
.1.3.6.1.4.1.4526.10.43.2.1,FASTPATH-BOXSERVICES-PRIVATE-MIB::boxsItemStateChangeEvent,INTEGER,read-only,,current,insertion(1):removal(2):becomeoperational(3):failure(4),This event describes states of the fan or power supply.  insertion - hot-pluggable fan or power supply was inserted removal - hot-pluggable fan or power supply was removed becomeoperational - fan or power supply became operational after failure state failure - fan or power supply failure happened, i.e. it is not able to perform its functions
.1.3.6.1.4.1.4526.10.43.2.2,FASTPATH-BOXSERVICES-PRIVATE-MIB::boxsTemperatureChangeEvent,INTEGER,read-only,,current,abovethreshold(1):belowthreshold(2):withinnormalrange(3),This event describes change of the temperature.  To avoid flipping on boundary conditions, it is allowed to send the trap  taking into account some margin around thresholds.  abovethreshold - temperature increased and crossed upper threshold value belowthreshold - temperature decreased and crossed lower threshold value withinnormalrange - temperature returned to normal range (between threshold)
.1.3.6.1.4.1.4526.10.100,TACACS-CLIENT-MIB::agentTacacsClientMIB,,,,,,This MIB module defines a portion of the SNMP MIB under the NETGEAR enterprise OID pertaining to TACACS+ client configuration.
.1.3.6.1.4.1.4526.10.100.1,TACACS-CLIENT-MIB::agentTacacsClientObjects,,,,,,
.1.3.6.1.4.1.4526.10.100.1.1,TACACS-CLIENT-MIB::agentTacacsGlobalConfigGroup,,,,,,
.1.3.6.1.4.1.4526.10.100.1.1.1,TACACS-CLIENT-MIB::agentTacacsGlobalTimeout,Unsigned32,read-write,,current,,The time-out in seconds for communication  with TACACS servers .
.1.3.6.1.4.1.4526.10.100.1.1.2,TACACS-CLIENT-MIB::agentTacacsGlobalKey,OCTET,read-write,,current,,The Encryption and Authentication key used in  communication with TACACS servers .
.1.3.6.1.4.1.4526.10.100.1.2,TACACS-CLIENT-MIB::agentTacacsServerTable,,not-accessible,,current,,Table of Tacacs server entries
.1.3.6.1.4.1.4526.10.100.1.2.1,TACACS-CLIENT-MIB::agentTacacsServerEntry,,not-accessible,agentTacacsServerIpAddress,current,,An entry in the Tacacs Server table.
.1.3.6.1.4.1.4526.10.100.1.2.1.1,TACACS-CLIENT-MIB::agentTacacsServerIpAddress,OCTET,not-accessible,,current,,The IP address or HostName of the TACACS server.
.1.3.6.1.4.1.4526.10.100.1.2.1.2,TACACS-CLIENT-MIB::agentTacacsServerIpAddrType,INTEGER,read-create,,current,unknown(0):ipv4(1):ipv6(2):ipv4z(3):ipv6z(4):dns(16),The type of address of the TACACS server.  IPv4 and DNS types are supported currently
.1.3.6.1.4.1.4526.10.100.1.2.1.3,TACACS-CLIENT-MIB::agentTacacsPortNumber,Unsigned32,read-write,,current,,The port number of the TACACS server.
.1.3.6.1.4.1.4526.10.100.1.2.1.4,TACACS-CLIENT-MIB::agentTacacsTimeOut,Unsigned32,read-write,,current,,The time out value for the TACACS server.  If not set the value of agentTacacsGlobalTimeout will be used
.1.3.6.1.4.1.4526.10.100.1.2.1.5,TACACS-CLIENT-MIB::agentTacacsKey,OCTET,read-write,,current,,The authentication key for the TACACS server.
.1.3.6.1.4.1.4526.10.100.1.2.1.6,TACACS-CLIENT-MIB::agentTacacsPriority,Unsigned32,read-write,,current,,The priority of the TACACS server.
.1.3.6.1.4.1.4526.10.100.1.2.1.7,TACACS-CLIENT-MIB::agentTacacsServerStatus,INTEGER,read-create,,current,active(1):notInService(2):notReady(3):createAndGo(4):createAndWait(5):destroy(6),The row status of this entry . Supported values: active(1) - valid entry createAndGo(4) - used to create a new entry destroy(6) - removes the entry.
.1.3.6.1.4.1.4526.11,BROADCOM-REF-MIB::ng700smartswitch,,,,,,
.1.3.6.1.4.1.4526.11.1,NETGEAR-SWITCHING-MIB::agentSwitching,,,,,,The Netgear Private MIB for Switching
.1.3.6.1.4.1.4526.11.1.0,NETGEAR-SWITCHING-MIB::agentSwitchingTraps,,,,,,
.1.3.6.1.4.1.4526.11.1.0.1,NETGEAR-SWITCHING-MIB::multipleUsersTrap,,,,,,This trap is sent when more than one user is logged in with administrative access. Only applies to CLI interface.
.1.3.6.1.4.1.4526.11.1.0.2,NETGEAR-SWITCHING-MIB::broadcastStormStartTrap,,,,,,This trap is sent when a broadcast storm is detected.
.1.3.6.1.4.1.4526.11.1.0.3,NETGEAR-SWITCHING-MIB::broadcastStormEndTrap,,,,,,This trap is sent when a broadcast storm is no longer detected.
.1.3.6.1.4.1.4526.11.1.0.4,NETGEAR-SWITCHING-MIB::linkFailureTrap,,,,,,
.1.3.6.1.4.1.4526.11.1.0.5,NETGEAR-SWITCHING-MIB::vlanRequestFailureTrap,,,,,,
.1.3.6.1.4.1.4526.11.1.0.6,NETGEAR-SWITCHING-MIB::vlanDeleteLastTrap,,,,,,Trap is sent when attempting to delete the last configured VLAN or the Default VLAN.
.1.3.6.1.4.1.4526.11.1.0.7,NETGEAR-SWITCHING-MIB::vlanDefaultCfgFailureTrap,,,,,,Trap is sent if there are failures in resetting VLAN configuration to defaults.
.1.3.6.1.4.1.4526.11.1.0.8,NETGEAR-SWITCHING-MIB::vlanRestoreFailureTrap,,,,,,
.1.3.6.1.4.1.4526.11.1.0.9,NETGEAR-SWITCHING-MIB::fanFailureTrap,,,,,,
.1.3.6.1.4.1.4526.11.1.0.10,NETGEAR-SWITCHING-MIB::stpInstanceNewRootTrap,,,,,,Trap is sent when this machine is a new STP Root when there is more than one STP instance.
.1.3.6.1.4.1.4526.11.1.0.11,NETGEAR-SWITCHING-MIB::stpInstanceTopologyChangeTrap,,,,,,Trap is sent when there is a STP topology change when there is more than one STP instance.
.1.3.6.1.4.1.4526.11.1.0.12,NETGEAR-SWITCHING-MIB::powerSupplyStatusChangeTrap,,,,,,
.1.3.6.1.4.1.4526.11.1.0.13,NETGEAR-SWITCHING-MIB::failedUserLoginTrap,,,,,,Trap is sent when a user fails to authenticate via the CLI or Web interfaces.
.1.3.6.1.4.1.4526.11.1.0.14,NETGEAR-SWITCHING-MIB::userLockoutTrap,,,,,,Trap is sent when a user account is locked due to consecutive failed login attempts via the CLI or Web interfaces beyond the allowed limit.
.1.3.6.1.4.1.4526.11.1.1,NETGEAR-SWITCHING-MIB::agentInfoGroup,,,,,,
.1.3.6.1.4.1.4526.11.1.1.1,NETGEAR-SWITCHING-MIB::agentInventoryGroup,,,,,,
.1.3.6.1.4.1.4526.11.1.1.1.1,NETGEAR-SWITCHING-MIB::agentInventorySysDescription,OCTET,read-only,,current,,The switch's Inventory system description. 
.1.3.6.1.4.1.4526.11.1.1.1.2,NETGEAR-SWITCHING-MIB::agentInventoryMachineType,OCTET,read-only,,current,,Type of the Machine used in the Switch 
.1.3.6.1.4.1.4526.11.1.1.1.3,NETGEAR-SWITCHING-MIB::agentInventoryMachineModel,OCTET,read-only,,current,,The switch's Machine Model. 
.1.3.6.1.4.1.4526.11.1.1.1.4,NETGEAR-SWITCHING-MIB::agentInventorySerialNumber,OCTET,read-only,,current,,Serial number of the switch.
.1.3.6.1.4.1.4526.11.1.1.1.5,NETGEAR-SWITCHING-MIB::agentInventoryFRUNumber,OCTET,read-only,,current,,FRU Number of the switch
.1.3.6.1.4.1.4526.11.1.1.1.6,NETGEAR-SWITCHING-MIB::agentInventoryMaintenanceLevel,OCTET,read-only,,current,,The switch's Inventory Maintenance Level
.1.3.6.1.4.1.4526.11.1.1.1.7,NETGEAR-SWITCHING-MIB::agentInventoryPartNumber,OCTET,read-only,,current,,The switch's Inventory Part Number
.1.3.6.1.4.1.4526.11.1.1.1.8,NETGEAR-SWITCHING-MIB::agentInventoryManufacturer,OCTET,read-only,,current,,Name of the Manufacturer of this unit
.1.3.6.1.4.1.4526.11.1.1.1.9,NETGEAR-SWITCHING-MIB::agentInventoryBurnedInMacAddress,OCTET,read-only,,current,,Burned-In MAC Address
.1.3.6.1.4.1.4526.11.1.1.1.10,NETGEAR-SWITCHING-MIB::agentInventoryOperatingSystem,OCTET,read-only,,current,,Operating System running on this unit
.1.3.6.1.4.1.4526.11.1.1.1.11,NETGEAR-SWITCHING-MIB::agentInventoryNetworkProcessingDevice,OCTET,read-only,,current,,Network Processing Device for this unit
.1.3.6.1.4.1.4526.11.1.1.1.12,NETGEAR-SWITCHING-MIB::agentInventoryAdditionalPackages,OCTET,read-only,,current,,Lists additional functional packages available on this unit.
.1.3.6.1.4.1.4526.11.1.1.1.13,NETGEAR-SWITCHING-MIB::agentInventorySoftwareVersion,OCTET,read-only,,current,,Lists the version of software loaded on this unit.
.1.3.6.1.4.1.4526.11.1.1.2,NETGEAR-SWITCHING-MIB::agentTrapLogGroup,,,,,,
.1.3.6.1.4.1.4526.11.1.1.2.1,NETGEAR-SWITCHING-MIB::agentTrapLogTotal,Integer32,read-only,,current,,The total number of traps sent since last reset.
.1.3.6.1.4.1.4526.11.1.1.2.3,NETGEAR-SWITCHING-MIB::agentTrapLogTotalSinceLastViewed,Integer32,read-only,,current,,The number of traps sent since last viewed.
.1.3.6.1.4.1.4526.11.1.1.2.4,NETGEAR-SWITCHING-MIB::agentTrapLogTable,,not-accessible,,current,,Agent Trap Log
.1.3.6.1.4.1.4526.11.1.1.2.4.1,NETGEAR-SWITCHING-MIB::agentTrapLogEntry,,not-accessible,agentTrapLogIndex,current,,Agent trap log entry
.1.3.6.1.4.1.4526.11.1.1.2.4.1.1,NETGEAR-SWITCHING-MIB::agentTrapLogIndex,Integer32,read-only,,current,,Unique index of trap entry
.1.3.6.1.4.1.4526.11.1.1.2.4.1.2,NETGEAR-SWITCHING-MIB::agentTrapLogSystemTime,OCTET,read-only,,current,,System uptime when trap was sent. This entry shows how long the system has been up when the trap occurred.
.1.3.6.1.4.1.4526.11.1.1.2.4.1.3,NETGEAR-SWITCHING-MIB::agentTrapLogTrap,OCTET,read-only,,current,,Description of the trap sent.
.1.3.6.1.4.1.4526.11.1.1.3,NETGEAR-SWITCHING-MIB::agentSupportedMibTable,,not-accessible,,current,,Supported MIB table
.1.3.6.1.4.1.4526.11.1.1.3.1,NETGEAR-SWITCHING-MIB::agentSupportedMibEntry,,not-accessible,agentSupportedMibIndex,current,,Supported MIB entry
.1.3.6.1.4.1.4526.11.1.1.3.1.1,NETGEAR-SWITCHING-MIB::agentSupportedMibIndex,Integer32,read-only,,current,,Unique index of the Supported MIB entry
.1.3.6.1.4.1.4526.11.1.1.3.1.2,NETGEAR-SWITCHING-MIB::agentSupportedMibName,OCTET,read-only,,current,,The name of the MIB (RFC or IEEE) that is supported.
.1.3.6.1.4.1.4526.11.1.1.3.1.3,NETGEAR-SWITCHING-MIB::agentSupportedMibDescription,OCTET,read-only,,current,,Description of the MIB (RFC or IEEE) that is supported.
.1.3.6.1.4.1.4526.11.1.2,NETGEAR-SWITCHING-MIB::agentConfigGroup,,,,,,
.1.3.6.1.4.1.4526.11.1.2.1,NETGEAR-SWITCHING-MIB::agentCLIConfigGroup,,,,,,
.1.3.6.1.4.1.4526.11.1.2.1.1,NETGEAR-SWITCHING-MIB::agentLoginSessionTable,,not-accessible,,current,,A table of the switch's login session
.1.3.6.1.4.1.4526.11.1.2.1.1.1,NETGEAR-SWITCHING-MIB::agentLoginSessionEntry,,not-accessible,agentLoginSessionIndex,current,,Login Session Entry
.1.3.6.1.4.1.4526.11.1.2.1.1.1.1,NETGEAR-SWITCHING-MIB::agentLoginSessionIndex,Integer32,read-only,,current,,Agent Login Session Index of the switch
.1.3.6.1.4.1.4526.11.1.2.1.1.1.2,NETGEAR-SWITCHING-MIB::agentLoginSessionUserName,OCTET,read-only,,current,,Agent Login Session UserName of the switch
.1.3.6.1.4.1.4526.11.1.2.1.1.1.3,NETGEAR-SWITCHING-MIB::agentLoginSessionIPAddress,IpAddress,read-only,,obsolete,,Agent Login Session IP Address of the switch
.1.3.6.1.4.1.4526.11.1.2.1.1.1.4,NETGEAR-SWITCHING-MIB::agentLoginSessionConnectionType,INTEGER,read-only,,current,serial(1):telnet(2):ssh(3):http(4):https(5),Agent Login Session Connection Type of the switch
.1.3.6.1.4.1.4526.11.1.2.1.1.1.5,NETGEAR-SWITCHING-MIB::agentLoginSessionIdleTime,TimeTicks,read-only,,current,,Agent Login Session Idle Time of the switch
.1.3.6.1.4.1.4526.11.1.2.1.1.1.6,NETGEAR-SWITCHING-MIB::agentLoginSessionSessionTime,TimeTicks,read-only,,current,,Agent Login Session Time of the switch
.1.3.6.1.4.1.4526.11.1.2.1.1.1.7,NETGEAR-SWITCHING-MIB::agentLoginSessionStatus,INTEGER,read-write,,current,active(1):notInService(2):notReady(3):createAndGo(4):createAndWait(5):destroy(6),Status of the user. active(1) - This connection is active. destroy(6) - Set to this value to disconnect this user.
.1.3.6.1.4.1.4526.11.1.2.1.1.1.8,NETGEAR-SWITCHING-MIB::agentLoginSessionInetAddressType,INTEGER,read-only,,current,unknown(0):ipv4(1):ipv6(2):ipv4z(3):ipv6z(4):dns(16),Type of address agentLoginSessionInetAddress is returning. Can be either unknown(0), ipv4(1), or ipv6 (2). Will return unknown(0) in the case of a serial login.
.1.3.6.1.4.1.4526.11.1.2.1.1.1.9,NETGEAR-SWITCHING-MIB::agentLoginSessionInetAddress,OCTET,read-only,,current,,Inet Address of the connecting the user is logging in with. Will return a zero-length string in the case of a serial login.
.1.3.6.1.4.1.4526.11.1.2.1.2,NETGEAR-SWITCHING-MIB::agentTelnetConfigGroup,,,,,,
.1.3.6.1.4.1.4526.11.1.2.1.2.1,NETGEAR-SWITCHING-MIB::agentTelnetLoginTimeout,Integer32,read-write,,current,,Telnet login timeout (minutes) Config telnet timeout will set the telnet session timeout value. A session is active as long as the session has not remained idle for the value set. Specify a value from 1 to 160. Note: Changing the timeout value for active sessions does not become effective until the session is reaccessed. Any keystroke will also activate the new timeout duration.
.1.3.6.1.4.1.4526.11.1.2.1.2.2,NETGEAR-SWITCHING-MIB::agentTelnetMaxSessions,Integer32,read-write,,current,,Maximum number of Telnet Sessions Config telnet maxsessions is an integer value from 0 to 5 that specifies the maximum number of telnet sessions that can be established. If the value is 0, no Telnet session can be established. 
.1.3.6.1.4.1.4526.11.1.2.1.2.3,NETGEAR-SWITCHING-MIB::agentTelnetAllowNewMode,INTEGER,read-write,,current,enable(1):disable(2),Allow new telnet sessions (enable or disable) Config telnet disable means that no new Telnet sessions are to be established. Any already established session remains active until the session is ended or an abnormal network error ends it. 
.1.3.6.1.4.1.4526.11.1.2.1.3,NETGEAR-SWITCHING-MIB::agentUserConfigGroup,,,,,,
.1.3.6.1.4.1.4526.11.1.2.1.3.1,NETGEAR-SWITCHING-MIB::agentUserConfigCreate,OCTET,read-write,,current,,Create a new user. When set with a non-empty string, a new user with that name will be created. This object will only return an empty string. This string is limited to alpha-numeric strings (uncluding the '-' and '_' characters).
.1.3.6.1.4.1.4526.11.1.2.1.3.2,NETGEAR-SWITCHING-MIB::agentUserConfigTable,,not-accessible,,current,,User Config Table
.1.3.6.1.4.1.4526.11.1.2.1.3.2.1,NETGEAR-SWITCHING-MIB::agentUserConfigEntry,,not-accessible,agentUserIndex,current,,User Config Entry
.1.3.6.1.4.1.4526.11.1.2.1.3.2.1.1,NETGEAR-SWITCHING-MIB::agentUserIndex,Integer32,not-accessible,,current,,Agent User Config Index
.1.3.6.1.4.1.4526.11.1.2.1.3.2.1.2,NETGEAR-SWITCHING-MIB::agentUserName,OCTET,read-only,,current,,Agent User Name. This string is limited to alpha-numeric strings (including the '-' and '_' characters).
.1.3.6.1.4.1.4526.11.1.2.1.3.2.1.3,NETGEAR-SWITCHING-MIB::agentUserPassword,OCTET,read-write,,current,,Agent User Password This object will return an empty string even if a password is set.
.1.3.6.1.4.1.4526.11.1.2.1.3.2.1.4,NETGEAR-SWITCHING-MIB::agentUserAccessMode,INTEGER,read-only,,current,read(1):write(2),Agent User Access Mode
.1.3.6.1.4.1.4526.11.1.2.1.3.2.1.6,NETGEAR-SWITCHING-MIB::agentUserAuthenticationType,INTEGER,read-write,,current,none(1):hmacmd5(2):hmacsha(3),SNMPv3 User Authentication. The user passsword must be set to a string greater than or equal to 8 characters for this to be set to anything but none(1). none(1) - no authentication used hmacmd5(1) - Use HMAC-MD5 authentication hmacsha(1) - Use HMAC-SHA authentication
.1.3.6.1.4.1.4526.11.1.2.1.3.2.1.7,NETGEAR-SWITCHING-MIB::agentUserEncryptionType,INTEGER,read-write,,current,none(1):des(2),SNMPv3 User Encryption Can not be set to des(2) if agentUserAuthenticationType is set to none(1). none(1) - no encryption used des(2) - DES encryption used
.1.3.6.1.4.1.4526.11.1.2.1.3.2.1.8,NETGEAR-SWITCHING-MIB::agentUserEncryptionPassword,OCTET,read-write,,current,,SNMPv3 User Encryption Password This object will return an empty string even if a password is set. agentUserEncryptionType must be set to des(2) before this object can be configured. This object will return an empty string even if a password is set.
.1.3.6.1.4.1.4526.11.1.2.1.3.2.1.9,NETGEAR-SWITCHING-MIB::agentUserLockoutStatus,INTEGER,read-only,,current,false(0):true(1),Displays whether the user account is locked due to excessive failed login attempts.
.1.3.6.1.4.1.4526.11.1.2.1.3.2.1.10,NETGEAR-SWITCHING-MIB::agentUserPasswordExpireTime,OCTET,read-only,,current,,Date and time when the user's password expires (past or present). Only valid when password aging is enabled.
.1.3.6.1.4.1.4526.11.1.2.1.5,NETGEAR-SWITCHING-MIB::agentSerialGroup,,,,,,
.1.3.6.1.4.1.4526.11.1.2.1.5.1,NETGEAR-SWITCHING-MIB::agentSerialTimeout,Integer32,read-write,,current,,agentSerialTimeout specifies the maximum connect time(in minutes) without console activity. A value of 0 indicates that a console can be connected indefinitely. The time range is 0 to 160. 
.1.3.6.1.4.1.4526.11.1.2.1.5.2,NETGEAR-SWITCHING-MIB::agentSerialBaudrate,INTEGER,read-write,,current,baud-1200(1):baud-2400(2):baud-4800(3):baud-9600(4):baud-19200(5):baud-38400(6):baud-57600(7):baud-115200(8), agentSerialBaudrate specifies the current baud rate at which the serial port will try to connect. The available values are 1200, 2400, 4800, 9600, 19200, 38400,57600, and 115200 baud. 
.1.3.6.1.4.1.4526.11.1.2.1.5.3,NETGEAR-SWITCHING-MIB::agentSerialCharacterSize,Integer32,read-only,,current,,agentSerialCharacterSize specifies the number of bits in a character. The number of bits is always 8.
.1.3.6.1.4.1.4526.11.1.2.1.5.4,NETGEAR-SWITCHING-MIB::agentSerialHWFlowControlMode,INTEGER,read-only,,current,enable(1):disable(2),agentSerialHardwareFlowControl specifies whether hardware flow-control is enabled or disabled. Hardware Flow Control is always disabled.
.1.3.6.1.4.1.4526.11.1.2.1.5.5,NETGEAR-SWITCHING-MIB::agentSerialStopBits,Integer32,read-only,,current,, agentSerialStopBits specifies the number of Stop bits per character. The number of Stop bits is always 1.
.1.3.6.1.4.1.4526.11.1.2.1.5.6,NETGEAR-SWITCHING-MIB::agentSerialParityType,INTEGER,read-only,,current,even(1):odd(2):none(3), agentSerialParityType specifies the Parity Method used on the Serial Port. The Parity Method is always None. 
.1.3.6.1.4.1.4526.11.1.2.1.6,NETGEAR-SWITCHING-MIB::agentPasswordManagementConfigGroup,,,,,,
.1.3.6.1.4.1.4526.11.1.2.1.6.1,NETGEAR-SWITCHING-MIB::agentPasswordManagementMinLength,Integer32,read-write,,current,,Minimum length for user passwords All new local user passwords must be at least this many characters in length. 
.1.3.6.1.4.1.4526.11.1.2.1.6.2,NETGEAR-SWITCHING-MIB::agentPasswordManagementHistory,Integer32,read-write,,current,,The number of previous passwords to store for prevention of password reuse. This ensures that each user does not reuse passwords often. A value of 0 indicates that no previous passwords will be stored. 
.1.3.6.1.4.1.4526.11.1.2.1.6.3,NETGEAR-SWITCHING-MIB::agentPasswordManagementAging,Integer32,read-write,,current,,The maximum time that user passwords are valid, in days, from the time the password is set. Once a password expires, the user will be required to enter a new password following the first login after password expiration. A value of 0 indicates that passwords never expire. 
.1.3.6.1.4.1.4526.11.1.2.1.6.4,NETGEAR-SWITCHING-MIB::agentPasswordManagementLockAttempts,Integer32,read-write,,current,,The number of allowable failed local authentication attempts before the user's account is locked. A value of 0 indicates that user accounts will never be locked. 
.1.3.6.1.4.1.4526.11.1.2.2,NETGEAR-SWITCHING-MIB::agentLagConfigGroup,,,,,,
.1.3.6.1.4.1.4526.11.1.2.2.1,NETGEAR-SWITCHING-MIB::agentLagConfigCreate,OCTET,read-write,,current,,Agent LAG Create. When this object is set with a non-empty string, a new LAG will be created if possible with the entered string as its name.
.1.3.6.1.4.1.4526.11.1.2.2.2,NETGEAR-SWITCHING-MIB::agentLagSummaryConfigTable,,not-accessible,,current,,A summary table of the switch's LAG config entries
.1.3.6.1.4.1.4526.11.1.2.2.2.1,NETGEAR-SWITCHING-MIB::agentLagSummaryConfigEntry,,not-accessible,agentLagSummaryLagIndex,current,,Switch's LAG config entry
.1.3.6.1.4.1.4526.11.1.2.2.2.1.1,NETGEAR-SWITCHING-MIB::agentLagSummaryLagIndex,Integer32,read-only,,current,,Agent LAG IfIndex. This value corresponds with the LAG interface in the ifTable.
.1.3.6.1.4.1.4526.11.1.2.2.2.1.2,NETGEAR-SWITCHING-MIB::agentLagSummaryName,OCTET,read-write,,current,,Agent LAG Name. The associated name of the LAG used during creation.
.1.3.6.1.4.1.4526.11.1.2.2.2.1.3,NETGEAR-SWITCHING-MIB::agentLagSummaryFlushTimer,Integer32,read-write,,obsolete,,Agent LAG FlushTimer.
.1.3.6.1.4.1.4526.11.1.2.2.2.1.4,NETGEAR-SWITCHING-MIB::agentLagSummaryLinkTrap,INTEGER,read-write,,current,enable(1):disable(2),Agent LAG LinkTrap. Configures sending Link Up/Down traps when the LAG interface goes Up or Down.
.1.3.6.1.4.1.4526.11.1.2.2.2.1.5,NETGEAR-SWITCHING-MIB::agentLagSummaryAdminMode,INTEGER,read-write,,current,enable(1):disable(2),Agent LAG AdminMode. Administratively enables or disables this LAG interface.
.1.3.6.1.4.1.4526.11.1.2.2.2.1.6,NETGEAR-SWITCHING-MIB::agentLagSummaryStpMode,INTEGER,read-write,,current,dot1d(1):fast(2):off(3):dot1s(4),Agent LAG StpMode If Dot1d is enabled, the valid values are: dot1d(1), fast(2), and off(3) If Dot1s is enabled, the valid values are: off(3) and dot1s(4)
.1.3.6.1.4.1.4526.11.1.2.2.2.1.7,NETGEAR-SWITCHING-MIB::agentLagSummaryAddPort,Integer32,read-write,,current,,Agent LAG AddPort. Set to a non 0 value to add a port to the LAG. Values correspond to ifIndex values in the ifTable. Note: agentPortType for the port to be added must be full duplex and the same speed as previously added port(s), if any.
.1.3.6.1.4.1.4526.11.1.2.2.2.1.8,NETGEAR-SWITCHING-MIB::agentLagSummaryDeletePort,Integer32,read-write,,current,,Agent LAG DeletePort. Set to a non 0 value to remove a port from the LAG. Values correspond to ifIndex values in the ifTable.
.1.3.6.1.4.1.4526.11.1.2.2.2.1.9,NETGEAR-SWITCHING-MIB::agentLagSummaryStatus,INTEGER,read-write,,current,active(1):notInService(2):notReady(3):createAndGo(4):createAndWait(5):destroy(6),Agent LAG Status. active(1) - This LAG is enabled. destroy(6) - Set to this value to remove the LAG.
.1.3.6.1.4.1.4526.11.1.2.2.2.1.10,NETGEAR-SWITCHING-MIB::agentLagSummaryType,INTEGER,read-only,,current,static(1):dynamic(2),Agent LAG Type. static(1) - This LAG is staticly maintained. dynamic(2) - This LAG is dynamicly maintained.
.1.3.6.1.4.1.4526.11.1.2.2.2.1.11,NETGEAR-SWITCHING-MIB::agentLagSummaryStaticCapability,INTEGER,read-write,,current,enable(1):disable(2),Agent LAG Static Capability enable(1) - Static capability is enabled for this LAG interface disable(2) - Static capability is disabled for this LAG interface
.1.3.6.1.4.1.4526.11.1.2.2.3,NETGEAR-SWITCHING-MIB::agentLagDetailedConfigTable,,not-accessible,,current,,A detailed table of the switch's LAG config entries
.1.3.6.1.4.1.4526.11.1.2.2.3.1,NETGEAR-SWITCHING-MIB::agentLagDetailedConfigEntry,,not-accessible,agentLagDetailedLagIndex:agentLagDetailedIfIndex,current,,Switch's LAG config entry
.1.3.6.1.4.1.4526.11.1.2.2.3.1.1,NETGEAR-SWITCHING-MIB::agentLagDetailedLagIndex,Integer32,read-only,,current,,LAG index
.1.3.6.1.4.1.4526.11.1.2.2.3.1.2,NETGEAR-SWITCHING-MIB::agentLagDetailedIfIndex,Integer32,read-only,,current,,LAG port index
.1.3.6.1.4.1.4526.11.1.2.2.3.1.3,NETGEAR-SWITCHING-MIB::agentLagDetailedPortSpeed,OBJECT,read-only,,current,,LAG port speed. See agentPortType for a description and list of valid values.
.1.3.6.1.4.1.4526.11.1.2.2.3.1.4,NETGEAR-SWITCHING-MIB::agentLagDetailedPortStatus,INTEGER,read-only,,current,active(1):inactive(2),LAG port status. active(1) - Actively participating in the LAG. inactive(2) - Not participating in the LAG.
.1.3.6.1.4.1.4526.11.1.2.2.4,NETGEAR-SWITCHING-MIB::agentLagConfigStaticCapability,INTEGER,read-write,,obsolete,enable(1):disable(2),Agent LAG Static Capability. Configures whether Static LAGs are supported on this device.
.1.3.6.1.4.1.4526.11.1.2.3,NETGEAR-SWITCHING-MIB::agentNetworkConfigGroup,,,,,,
.1.3.6.1.4.1.4526.11.1.2.3.1,NETGEAR-SWITCHING-MIB::agentNetworkIPAddress,IpAddress,read-write,,current,,The switch's network ip address
.1.3.6.1.4.1.4526.11.1.2.3.2,NETGEAR-SWITCHING-MIB::agentNetworkSubnetMask,IpAddress,read-write,,current,,The switch's network subnet mask
.1.3.6.1.4.1.4526.11.1.2.3.3,NETGEAR-SWITCHING-MIB::agentNetworkDefaultGateway,IpAddress,read-write,,current,,The switch's network default gateway
.1.3.6.1.4.1.4526.11.1.2.3.4,NETGEAR-SWITCHING-MIB::agentNetworkBurnedInMacAddress,OCTET,read-only,,current,,The switch's network Burned-In MAC address
.1.3.6.1.4.1.4526.11.1.2.3.5,NETGEAR-SWITCHING-MIB::agentNetworkLocalAdminMacAddress,OCTET,read-write,,current,,The switch's network locally administered MAC address
.1.3.6.1.4.1.4526.11.1.2.3.6,NETGEAR-SWITCHING-MIB::agentNetworkMacAddressType,INTEGER,read-write,,current,burned-in(1):local(2),The switch's network Mac Address Type
.1.3.6.1.4.1.4526.11.1.2.3.7,NETGEAR-SWITCHING-MIB::agentNetworkConfigProtocol,INTEGER,read-write,,current,none(1):bootp(2):dhcp(3),The switch's network config protocol
.1.3.6.1.4.1.4526.11.1.2.3.8,NETGEAR-SWITCHING-MIB::agentNetworkWebMode,INTEGER,read-write,,obsolete,enable(1):disable(2),The switch's network config protocol on next bootup
.1.3.6.1.4.1.4526.11.1.2.3.9,NETGEAR-SWITCHING-MIB::agentNetworkJavaMode,INTEGER,read-write,,obsolete,enable(1):disable(2),Configures the use of the Java interface through the Web.
.1.3.6.1.4.1.4526.11.1.2.3.10,NETGEAR-SWITCHING-MIB::agentNetworkMgmtVlan,Integer32,read-write,,current,,The VLAN ID through which the switch can be managed using the agentNetworkIPAddress
.1.3.6.1.4.1.4526.11.1.2.3.11,NETGEAR-SWITCHING-MIB::agentNetworkIpv6AdminMode,INTEGER,read-write,,current,enabled(1):disabled(2),The network port IPv6 administrative state
.1.3.6.1.4.1.4526.11.1.2.3.12,NETGEAR-SWITCHING-MIB::agentNetworkIpv6Gateway,OCTET,read-write,,current,,The network port IPv6 Gateway Address
.1.3.6.1.4.1.4526.11.1.2.3.13,NETGEAR-SWITCHING-MIB::agentNetworkIpv6AddrTable,,not-accessible,,current,,The list of IPv6 address prefixes for the network port.
.1.3.6.1.4.1.4526.11.1.2.3.13.1,NETGEAR-SWITCHING-MIB::agentNetworkIpv6AddrEntry,,not-accessible,agentNetworkIpv6AddrPrefix,current,,An interface entry containing objects of a particular IPv6 address prefix
.1.3.6.1.4.1.4526.11.1.2.3.13.1.1,NETGEAR-SWITCHING-MIB::agentNetworkIpv6AddrPrefix,OCTET,not-accessible,,current,,The service port IPv6 Address Prefix
.1.3.6.1.4.1.4526.11.1.2.3.13.1.2,NETGEAR-SWITCHING-MIB::agentNetworkIpv6AddrPrefixLength,INTEGER,read-create,,current,,The service port IPv6 Address Prefix Length
.1.3.6.1.4.1.4526.11.1.2.3.13.1.3,NETGEAR-SWITCHING-MIB::agentNetworkIpv6AddrEuiFlag,INTEGER,read-create,,current,enabled(1):disabled(2),The service port IPv6 Eui Flag
.1.3.6.1.4.1.4526.11.1.2.3.13.1.4,NETGEAR-SWITCHING-MIB::agentNetworkIpv6AddrStatus,INTEGER,read-create,,current,active(1):notInService(2):notReady(3):createAndGo(4):createAndWait(5):destroy(6),
.1.3.6.1.4.1.4526.11.1.2.4,NETGEAR-SWITCHING-MIB::agentServicePortConfigGroup,,,,,,
.1.3.6.1.4.1.4526.11.1.2.4.1,NETGEAR-SWITCHING-MIB::agentServicePortIPAddress,IpAddress,read-write,,current,,The switch's ServicePort ip address
.1.3.6.1.4.1.4526.11.1.2.4.2,NETGEAR-SWITCHING-MIB::agentServicePortSubnetMask,IpAddress,read-write,,current,,The switch's ServicePort subnet mask
.1.3.6.1.4.1.4526.11.1.2.4.3,NETGEAR-SWITCHING-MIB::agentServicePortDefaultGateway,IpAddress,read-write,,current,,The switch's ServicePort default gateway
.1.3.6.1.4.1.4526.11.1.2.4.4,NETGEAR-SWITCHING-MIB::agentServicePortBurnedInMacAddress,OCTET,read-only,,current,,The switch's ServicePort Burned-In MAC address
.1.3.6.1.4.1.4526.11.1.2.4.5,NETGEAR-SWITCHING-MIB::agentServicePortConfigProtocol,INTEGER,read-write,,current,none(1):bootp(2):dhcp(3),The switch's ServicePort config protocol
.1.3.6.1.4.1.4526.11.1.2.4.6,NETGEAR-SWITCHING-MIB::agentServicePortIpv6AdminMode,INTEGER,read-write,,current,enabled(1):disabled(2),The service port IPv6 administrative state
.1.3.6.1.4.1.4526.11.1.2.4.7,NETGEAR-SWITCHING-MIB::agentServicePortIpv6Gateway,OCTET,read-write,,current,,The service port IPv6 Gateway Address
.1.3.6.1.4.1.4526.11.1.2.4.8,NETGEAR-SWITCHING-MIB::agentServicePortIpv6AddrTable,,not-accessible,,current,,The list of IPv6 address prefixes for the service port.
.1.3.6.1.4.1.4526.11.1.2.4.8.1,NETGEAR-SWITCHING-MIB::agentServicePortIpv6AddrEntry,,not-accessible,agentServicePortIpv6AddrPrefix,current,,An interface entry containing objects of a particular IPv6 address prefix
.1.3.6.1.4.1.4526.11.1.2.4.8.1.1,NETGEAR-SWITCHING-MIB::agentServicePortIpv6AddrPrefix,OCTET,not-accessible,,current,,The service port IPv6 Address Prefix
.1.3.6.1.4.1.4526.11.1.2.4.8.1.2,NETGEAR-SWITCHING-MIB::agentServicePortIpv6AddrPrefixLength,INTEGER,read-create,,current,,The service port IPv6 Address Prefix Length
.1.3.6.1.4.1.4526.11.1.2.4.8.1.3,NETGEAR-SWITCHING-MIB::agentServicePortIpv6AddrEuiFlag,INTEGER,read-create,,current,enabled(1):disabled(2),The service port IPv6 Eui Flag
.1.3.6.1.4.1.4526.11.1.2.4.8.1.4,NETGEAR-SWITCHING-MIB::agentServicePortIpv6AddrStatus,INTEGER,read-create,,current,active(1):notInService(2):notReady(3):createAndGo(4):createAndWait(5):destroy(6),
.1.3.6.1.4.1.4526.11.1.2.6,NETGEAR-SWITCHING-MIB::agentSnmpConfigGroup,,,,,,
.1.3.6.1.4.1.4526.11.1.2.6.1,NETGEAR-SWITCHING-MIB::agentSnmpCommunityCreate,OCTET,read-write,,current,,Creates a new SNMP Community entry. Defaults: IPAddress 0.0.0.0 IpMask 0.0.0.0 AccessMode read-only Status config
.1.3.6.1.4.1.4526.11.1.2.6.2,NETGEAR-SWITCHING-MIB::agentSnmpCommunityConfigTable,,not-accessible,,current,,A table of the switch's SNMP Config entries
.1.3.6.1.4.1.4526.11.1.2.6.2.1,NETGEAR-SWITCHING-MIB::agentSnmpCommunityConfigEntry,,not-accessible,agentSnmpCommunityIndex,current,,Switch's SNMP Config entry
.1.3.6.1.4.1.4526.11.1.2.6.2.1.1,NETGEAR-SWITCHING-MIB::agentSnmpCommunityIndex,Integer32,read-only,,current,,The switch's Snmp Community Index
.1.3.6.1.4.1.4526.11.1.2.6.2.1.2,NETGEAR-SWITCHING-MIB::agentSnmpCommunityName,OCTET,read-write,,current,,The switch's Snmp Community Name This name identifies each SNMP community; the name can be up to 16 characters, and it is case-sensitive. Community names in the SNMP community must be unique. If you make multiple entries using the same community name, the first entry is kept and processed and all duplicate entries are ignored. 
.1.3.6.1.4.1.4526.11.1.2.6.2.1.3,NETGEAR-SWITCHING-MIB::agentSnmpCommunityIPAddress,IpAddress,read-write,,current,,The switch's Snmp Community IP Address Client IP Address - This attribute is an IP address (or portion thereof) from which this device will accept SNMP packets with the associated community. The requesting entity's IP address is logical-ANDed with the Client IP Mask and the result must match the Client IP Address. Note: If the Client IP Mask is set to 0.0.0.0, a Client IP Address of 0.0.0.0 matches all IP addresses. 
.1.3.6.1.4.1.4526.11.1.2.6.2.1.4,NETGEAR-SWITCHING-MIB::agentSnmpCommunityIPMask,IpAddress,read-write,,current,,The switch's Snmp Community IP Mask Client IP Mask - This attribute is a mask to be logical-ANDed with the requesting entity's IP address before comparison with the Client IP Address. If the result matches with Client IP Address then the address is an authenticated IP address. For example, if the Client IP Address is 9.47.128.0 and the corresponding Client IP Mask is 255.255.255.0, a range of incoming IP addresses would match, that is, the incoming IP addresses could be a value in the following range: 9.47.128.0 to 9.47.128.255. To have a specific IP address be the only authenticated IP address, set the Client IP Address to the required IP address and set the Client IP Mask to 255.255.255.255. 
.1.3.6.1.4.1.4526.11.1.2.6.2.1.5,NETGEAR-SWITCHING-MIB::agentSnmpCommunityAccessMode,INTEGER,read-write,,current,,The switch's Snmp Community Access Mode Access Mode - This value can be read-only or read/write. A community with a read-only access allows for switch information to be displayed. A community with a read/write access allows for configuration changes to be made and for information to be displayed. 
.1.3.6.1.4.1.4526.11.1.2.6.2.1.6,NETGEAR-SWITCHING-MIB::agentSnmpCommunityStatus,INTEGER,read-write,,current,active(1):notInService(2):config(3):destroy(4),The switch's Snmp Community Status. active(1) - This community is active, allowing SNMP managers associated with this community to manage the switch according to its access right. notInService(2) - This community is not active; no SNMP requests using this community will be accepted. In this case the SNMP manager associated with this community cannot manage the switch until the Status is changed back to active(1). config(3) - The community Status must be set to this value in order to configure it. When creating a new community entry, initial Status will be set to this value. destroy(4) - Set to this value to remove the community from the agent.
.1.3.6.1.4.1.4526.11.1.2.6.3,NETGEAR-SWITCHING-MIB::agentSnmpTrapReceiverCreate,OCTET,read-write,,current,,Creates a new trap receiver entry. Defaults: IPAddress 0.0.0.0 status config
.1.3.6.1.4.1.4526.11.1.2.6.4,NETGEAR-SWITCHING-MIB::agentSnmpTrapReceiverConfigTable,,not-accessible,,current,,Trap messages are sent across a network to an SNMP Network Manager. These messages alert the manager to events occurring within the switch or on the network. Up to six simultaneous trap receivers are supported. 
.1.3.6.1.4.1.4526.11.1.2.6.4.1,NETGEAR-SWITCHING-MIB::agentSnmpTrapReceiverConfigEntry,,not-accessible,agentSnmpTrapReceiverIndex,current,,Switch's Snmp Trace Receiver Config entry
.1.3.6.1.4.1.4526.11.1.2.6.4.1.1,NETGEAR-SWITCHING-MIB::agentSnmpTrapReceiverIndex,Integer32,read-only,,current,,The switch's Snmp Trap Receiver Index
.1.3.6.1.4.1.4526.11.1.2.6.4.1.2,NETGEAR-SWITCHING-MIB::agentSnmpTrapReceiverCommunityName,OCTET,read-write,,current,,The switch's Snmp Trap Receiver Community Name. This is the SNMP community name of the remote network manager; the name can be up to 16 characters, and is case-sensitive. 
.1.3.6.1.4.1.4526.11.1.2.6.4.1.3,NETGEAR-SWITCHING-MIB::agentSnmpTrapReceiverIPAddress,IpAddress,read-write,,current,,IP Address - Each IP address parameter is four integer numbers. The numbers range from 0 to 255. 
.1.3.6.1.4.1.4526.11.1.2.6.4.1.4,NETGEAR-SWITCHING-MIB::agentSnmpTrapReceiverStatus,INTEGER,read-write,,current,active(1):notInService(2):config(3):destroy(4),The switch's Snmp Trap Reciever Status. active(1) - This trap receiver is active, allowing SNMP Traps to be sent to this receiver. notInService(2) - This trap reciever is not active; no SNMP Traps will be sent to this reciever until it's set back to active(1). config(3) - The trap reciever Status must be set to this value in order to configure it. When creating a new trap receiver entry, the Status will initially be set to this value. Note: agentSnmpTrapReceiverIPAddress must be set to non-zero before changing to active(1) or notInService(2). destroy(4) - Set to this value to remove the trap receiver entry from the agent.
.1.3.6.1.4.1.4526.11.1.2.6.4.1.5,NETGEAR-SWITCHING-MIB::agentSnmpTrapReceiverVersion,INTEGER,read-write,,current,snmpv1(1):snmpv2c(2),The version of trap sent to this Reciever. snmpv1(1) - This will send a SNMPv1 trap. snmpv2c(2) - This will send a SNMPv2c trap.
.1.3.6.1.4.1.4526.11.1.2.6.4.1.6,NETGEAR-SWITCHING-MIB::agentSnmpTrapReceiverIpv6Address,OCTET,read-write,,current,,IPv6 Address for SNMP receiver.
.1.3.6.1.4.1.4526.11.1.2.6.5,NETGEAR-SWITCHING-MIB::agentSnmpTrapFlagsConfigGroup,,,,,,
.1.3.6.1.4.1.4526.11.1.2.6.5.1,NETGEAR-SWITCHING-MIB::agentSnmpAuthenticationTrapFlag,INTEGER,read-write,,current,enable(1):disable(2),Authentication Flag - Enable/Disable authentication Flag.
.1.3.6.1.4.1.4526.11.1.2.6.5.2,NETGEAR-SWITCHING-MIB::agentSnmpLinkUpDownTrapFlag,INTEGER,read-write,,current,enable(1):disable(2),Link Up/Down Flag - Enable/Disable Link Up/Link Down traps for the entire switch. When set to Enable, the Link Up/Down traps will be sent only if the Link Trap flag setting associated with the port (Port Configuration Menu) is set to Enable. 
.1.3.6.1.4.1.4526.11.1.2.6.5.3,NETGEAR-SWITCHING-MIB::agentSnmpMultipleUsersTrapFlag,INTEGER,read-write,,current,enable(1):disable(2),Multiple Users Flag - Enable/Disable Multiple User traps. When the value is set to Enable, a Multiple User Trap is sent whenever someone logs in to the terminal interface (EIA 232 or Telnet) and there is already an existing terminal interface session. 
.1.3.6.1.4.1.4526.11.1.2.6.5.4,NETGEAR-SWITCHING-MIB::agentSnmpSpanningTreeTrapFlag,INTEGER,read-write,,current,enable(1):disable(2),Spanning Tree Flag - This flag enables the sending of new root traps and topology change notification traps.
.1.3.6.1.4.1.4526.11.1.2.6.5.5,NETGEAR-SWITCHING-MIB::agentSnmpBroadcastStormTrapFlag,INTEGER,read-write,,obsolete,enable(1):disable(2),Broadcast Storm Flag - This flag enables or disables the broadcast storm trap. You must also enable Broadcast Storm Recovery Mode (see the Switch Configuration Menu). When this value is set to Enable and Broadcast Storm Recovery mode is set to Enable, the Broadcast Storm Start/End traps are sent when the switch enters and leaves Broadcast Storm Recovery. 
.1.3.6.1.4.1.4526.11.1.2.7,NETGEAR-SWITCHING-MIB::agentSpanningTreeConfigGroup,,,,,,
.1.3.6.1.4.1.4526.11.1.2.7.1,NETGEAR-SWITCHING-MIB::agentSpanningTreeMode,INTEGER,read-write,,current,enable(1):disable(2),The switch's Spanning Tree Switch Status
.1.3.6.1.4.1.4526.11.1.2.8,NETGEAR-SWITCHING-MIB::agentSwitchConfigGroup,,,,,,
.1.3.6.1.4.1.4526.11.1.2.8.4,NETGEAR-SWITCHING-MIB::agentSwitchAddressAgingTimeoutTable,,not-accessible,,current,,The switch's address aging timeout table
.1.3.6.1.4.1.4526.11.1.2.8.4.1,NETGEAR-SWITCHING-MIB::agentSwitchAddressAgingTimeoutEntry,,not-accessible,dot1qFdbId,current,,Aging information about a specific Filtering Database.
.1.3.6.1.4.1.4526.11.1.2.8.4.1.1,NETGEAR-SWITCHING-MIB::agentSwitchAddressAgingTimeout,Integer32,read-write,,current,,The FDB entry's address aging timeout (in seconds)
.1.3.6.1.4.1.4526.11.1.2.8.5,NETGEAR-SWITCHING-MIB::agentSwitchStaticMacFilteringTable,,not-accessible,,current,,The switch's static Mac filtering table
.1.3.6.1.4.1.4526.11.1.2.8.5.1,NETGEAR-SWITCHING-MIB::agentSwitchStaticMacFilteringEntry,,not-accessible,agentSwitchStaticMacFilteringVlanId:agentSwitchStaticMacFilteringAddress,current,,Per-port ingress/egress filter configuration based on VLAN Id and MAC address.
.1.3.6.1.4.1.4526.11.1.2.8.5.1.1,NETGEAR-SWITCHING-MIB::agentSwitchStaticMacFilteringVlanId,Integer32,read-only,,current,,The Static MAC Filter Vlan Id
.1.3.6.1.4.1.4526.11.1.2.8.5.1.2,NETGEAR-SWITCHING-MIB::agentSwitchStaticMacFilteringAddress,OCTET,read-only,,current,,The Static MAC Filter MAC address
.1.3.6.1.4.1.4526.11.1.2.8.5.1.3,NETGEAR-SWITCHING-MIB::agentSwitchStaticMacFilteringSourcePortMask,OCTET,read-write,,current,,The Static MAC Filter source port mask. When setting this value, the system will ignore configuration for ports not between the first and last valid ports. Configuration of any port numbers between this range that are not valid ports return a failure message, but will still apply configuration for valid ports. To obtain port numbers from interface numbers, use the objects agentPortDot1dBasePort and agentPortIfIndex in the agentPortConfigTable table.
.1.3.6.1.4.1.4526.11.1.2.8.5.1.4,NETGEAR-SWITCHING-MIB::agentSwitchStaticMacFilteringDestPortMask,OCTET,read-write,,current,,The Static MAC Filter destination port mask. When setting this value, the system will ignore configuration for ports not between the first and last valid ports. Configuration of any port numbers between this range that are not valid ports return a failure message, but will still apply configuration for valid ports. To obtain port numbers from interface numbers, use the objects agentPortDot1dBasePort and agentPortIfIndex in the agentPortConfigTable table. Configuring destination port mask for a unicast MAC filter is not supported on some platforms.
.1.3.6.1.4.1.4526.11.1.2.8.5.1.5,NETGEAR-SWITCHING-MIB::agentSwitchStaticMacFilteringStatus,INTEGER,read-create,,current,active(1):notInService(2):notReady(3):createAndGo(4):createAndWait(5):destroy(6),The Static MAC Filter status. Supported values: active(1) - valid entry createAndGo(4) - used to create a new entry destroy(6) - removes the entry
.1.3.6.1.4.1.4526.11.1.2.8.6,NETGEAR-SWITCHING-MIB::agentSwitchSnoopingGroup,,,,,,
.1.3.6.1.4.1.4526.11.1.2.8.6.1,NETGEAR-SWITCHING-MIB::agentSwitchSnoopingCfgTable,,not-accessible,,current,,A table of the IGMP/MLD Snooping Global configuration entries.
.1.3.6.1.4.1.4526.11.1.2.8.6.1.1,NETGEAR-SWITCHING-MIB::agentSwitchSnoopingCfgEntry,,not-accessible,agentSwitchSnoopingProtocol,current,,Represents entry for Snooping switch Configuration.
.1.3.6.1.4.1.4526.11.1.2.8.6.1.1.1,NETGEAR-SWITCHING-MIB::agentSwitchSnoopingProtocol,INTEGER,read-only,,current,unknown(0):ipv4(1):ipv6(2):ipv4z(3):ipv6z(4):dns(16),The protocol type of network protocol in use.
.1.3.6.1.4.1.4526.11.1.2.8.6.1.1.2,NETGEAR-SWITCHING-MIB::agentSwitchSnoopingAdminMode,INTEGER,read-write,,current,enable(1):disable(2),This enables or disables Snooping on the system. 
.1.3.6.1.4.1.4526.11.1.2.8.6.1.1.3,NETGEAR-SWITCHING-MIB::agentSwitchSnoopingPortMask,OCTET,read-write,,current,,IGMP/MLD Snooping Port Mask. This allows configuration of IGMP/MLD Snooping on selected ports. IGMP Snooping cannot be enabled on an interface that has routing enabled, or is a member of a LAG. If a port which has IGMP Snooping enabled becomes enabled for routing, or is enlisted as a member of a LAG, IGMP Snooping functionality will be disabled on that port. IGMP Snooping functionality will be subsequently be reenabled if routing is disabled or LAG membership is removed from an interface that had previously had IGMP Snooping enabled. To obtain port numbers from interface numbers, use the objects agentPortDot1dBasePort and agentPortIfIndex in the agentPortConfigTable table.
.1.3.6.1.4.1.4526.11.1.2.8.6.1.1.4,NETGEAR-SWITCHING-MIB::agentSwitchSnoopingMulticastControlFramesProcessed,Counter32,read-only,,current,,Multicast Control Frames Processed by CPU. The number of multicast control frames that have been processed by the CPU.
.1.3.6.1.4.1.4526.11.1.2.8.7,NETGEAR-SWITCHING-MIB::agentSwitchSnoopingIntfGroup,,,,,,
.1.3.6.1.4.1.4526.11.1.2.8.7.1,NETGEAR-SWITCHING-MIB::agentSwitchSnoopingIntfTable,,not-accessible,,current,,A table of the IGMP Snooping Interface configuration entries.
.1.3.6.1.4.1.4526.11.1.2.8.7.1.1,NETGEAR-SWITCHING-MIB::agentSwitchSnoopingIntfEntry,,not-accessible,ifIndex:agentSwitchSnoopingProtocol,current,,Represents entry for a IGMP Snooping Interface.
.1.3.6.1.4.1.4526.11.1.2.8.7.1.1.1,NETGEAR-SWITCHING-MIB::agentSwitchSnoopingIntfIndex,Unsigned32,read-only,,current,,The port number to be selected. Each port maps to an interface.
.1.3.6.1.4.1.4526.11.1.2.8.7.1.1.2,NETGEAR-SWITCHING-MIB::agentSwitchSnoopingIntfAdminMode,INTEGER,read-write,,current,enable(1):disable(2),This enables or disables IGMP Snooping on a selected interface.
.1.3.6.1.4.1.4526.11.1.2.8.7.1.1.3,NETGEAR-SWITCHING-MIB::agentSwitchSnoopingIntfGroupMembershipInterval,Integer32,read-write,,current,,The amount of time in seconds that a switch will wait for a report from a particular group on the selected interface before deleting the interface from the entry. This value must be greater than agentSwitchIGMPSnoopingIntfMaxResponseTime.
.1.3.6.1.4.1.4526.11.1.2.8.7.1.1.4,NETGEAR-SWITCHING-MIB::agentSwitchSnoopingIntfMaxResponseTime,Integer32,read-write,,current,,The amount of time in seconds a switch will wait after sending a query on the selected interface because it did not receive a report for a particular group in that interface. This value must be less than agentSwitchIGMPSnoopingIntfGroupMembershipInterval.
.1.3.6.1.4.1.4526.11.1.2.8.7.1.1.5,NETGEAR-SWITCHING-MIB::agentSwitchSnoopingIntfMRPExpirationTime,Integer32,read-write,,current,,The amount of time in seconds that a switch will wait for a query to be received on the selected interface before the interface is removed from the list of interfaces with multicast routers attached.
.1.3.6.1.4.1.4526.11.1.2.8.7.1.1.6,NETGEAR-SWITCHING-MIB::agentSwitchSnoopingIntfFastLeaveAdminMode,INTEGER,read-write,,current,enable(1):disable(2),This enables or disables IGMP Snooping on the selected interface.
.1.3.6.1.4.1.4526.11.1.2.8.7.1.1.7,NETGEAR-SWITCHING-MIB::agentSwitchSnoopingIntfMulticastRouterMode,INTEGER,read-write,,current,enable(1):disable(2),This enables or disables Multicast Routing on the selected interface.
.1.3.6.1.4.1.4526.11.1.2.8.7.1.1.8,NETGEAR-SWITCHING-MIB::agentSwitchSnoopingIntfVlanIDs,OCTET,read-only,,current,,This field lists all the VlanIDs which include the selected interface.
.1.3.6.1.4.1.4526.11.1.2.8.8,NETGEAR-SWITCHING-MIB::agentSwitchSnoopingVlanGroup,,,,,,
.1.3.6.1.4.1.4526.11.1.2.8.8.1,NETGEAR-SWITCHING-MIB::agentSwitchSnoopingVlanTable,,not-accessible,,current,,A table of the IGMP Snooping Vlan configuration entries.
.1.3.6.1.4.1.4526.11.1.2.8.8.1.1,NETGEAR-SWITCHING-MIB::agentSwitchSnoopingVlanEntry,,not-accessible,dot1qVlanIndex:agentSwitchSnoopingProtocol,current,,Represents entry for a IGMP Snooping Vlan.
.1.3.6.1.4.1.4526.11.1.2.8.8.1.1.1,NETGEAR-SWITCHING-MIB::agentSwitchSnoopingVlanAdminMode,INTEGER,read-write,,current,disable(0):enable(1),This enables or disables IGMP Snooping on a selected Vlan interface.
.1.3.6.1.4.1.4526.11.1.2.8.8.1.1.2,NETGEAR-SWITCHING-MIB::agentSwitchSnoopingVlanGroupMembershipInterval,Integer32,read-write,,current,,The amount of time in seconds that a switch will wait for a report from a particular group on the selected vlan before deleting the interface participating in the vlan from the entry. This value must be greater than agentSwitchIGMPSnoopingIntfMaxResponseTime.
.1.3.6.1.4.1.4526.11.1.2.8.8.1.1.3,NETGEAR-SWITCHING-MIB::agentSwitchSnoopingVlanMaxResponseTime,Integer32,read-write,,current,,The amount of time in seconds a switch will wait after sending a query on the selected vlan because it did not receive a report for a particular group in the interface participating in the vlan. This value must be less than agentSwitchIGMPSnoopingIntfGroupMembershipInterval.
.1.3.6.1.4.1.4526.11.1.2.8.8.1.1.4,NETGEAR-SWITCHING-MIB::agentSwitchSnoopingVlanFastLeaveAdminMode,INTEGER,read-write,,current,disable(0):enable(1),This enables or disables IGMP Snooping on the selected vlan.
.1.3.6.1.4.1.4526.11.1.2.8.8.1.1.5,NETGEAR-SWITCHING-MIB::agentSwitchSnoopingVlanMRPExpirationTime,Integer32,read-write,,current,,The amount of time in seconds that a switch will wait for a query to be received on the selected interface participating in the vlan before the interface is removed from the list of interfaces with multicast routers attached. This parameter is configurable only for exisiting Vlans.
.1.3.6.1.4.1.4526.11.1.2.8.9,NETGEAR-SWITCHING-MIB::agentSwitchVlanStaticMrouterGroup,,,,,,
.1.3.6.1.4.1.4526.11.1.2.8.9.1,NETGEAR-SWITCHING-MIB::agentSwitchVlanStaticMrouterTable,,not-accessible,,current,,A table of the IGMP Static Mrouter Configuration parameters.
.1.3.6.1.4.1.4526.11.1.2.8.9.1.1,NETGEAR-SWITCHING-MIB::agentSwitchVlanStaticMrouterEntry,,not-accessible,ifIndex:dot1qVlanIndex:agentSwitchSnoopingProtocol,current,,Represents entry for a IGMP Static Mrouter.
.1.3.6.1.4.1.4526.11.1.2.8.9.1.1.1,NETGEAR-SWITCHING-MIB::agentSwitchVlanStaticMrouterAdminMode,INTEGER,read-write,,current,disable(0):enable(1),This enables or disables IGMP Mrouter on a per-interface per-vlan basis.
.1.3.6.1.4.1.4526.11.1.2.8.10,NETGEAR-SWITCHING-MIB::agentSwitchMFDBGroup,,,,,,
.1.3.6.1.4.1.4526.11.1.2.8.10.1,NETGEAR-SWITCHING-MIB::agentSwitchMFDBTable,,not-accessible,,current,,The Multicast Forwarding Database table
.1.3.6.1.4.1.4526.11.1.2.8.10.1.1,NETGEAR-SWITCHING-MIB::agentSwitchMFDBEntry,,not-accessible,agentSwitchMFDBVlanId:agentSwitchMFDBMacAddress:agentSwitchMFDBProtocolType,current,,Contains Forwarding and Filtering information per Vlan Index, MAC Address, and Component User.
.1.3.6.1.4.1.4526.11.1.2.8.10.1.1.1,NETGEAR-SWITCHING-MIB::agentSwitchMFDBVlanId,Unsigned32,read-only,,current,,Vlan Index for which this entry is associated with.
.1.3.6.1.4.1.4526.11.1.2.8.10.1.1.2,NETGEAR-SWITCHING-MIB::agentSwitchMFDBMacAddress,OCTET,read-only,,current,,A multicast MAC address for which the switch has forwarding and or filtering information.
.1.3.6.1.4.1.4526.11.1.2.8.10.1.1.3,NETGEAR-SWITCHING-MIB::agentSwitchMFDBProtocolType,INTEGER,read-only,,current,static(1):gmrp(2):igmp(3):mld(4):mmrp(5):msrp(6),The component that is responsible for this entry in the Multicast Forwarding Database.
.1.3.6.1.4.1.4526.11.1.2.8.10.1.1.4,NETGEAR-SWITCHING-MIB::agentSwitchMFDBType,INTEGER,read-only,,current,static(1):dynamic(2),This displays the type of the entry. static(1) - Entries configured by the end user dynamic(2) - Entries added as a result of a learning process or protocol
.1.3.6.1.4.1.4526.11.1.2.8.10.1.1.5,NETGEAR-SWITCHING-MIB::agentSwitchMFDBDescription,OCTET,read-only,,current,,Text description of this multicast table entry.
.1.3.6.1.4.1.4526.11.1.2.8.10.1.1.6,NETGEAR-SWITCHING-MIB::agentSwitchMFDBForwardingPortMask,OCTET,read-only,,current,,BitMask indicating which ports this entry indicates should be forwarded. To obtain port numbers from interface numbers, use the objects agentPortDot1dBasePort and agentPortIfIndex in the agentPortConfigTable table.
.1.3.6.1.4.1.4526.11.1.2.8.10.1.1.7,NETGEAR-SWITCHING-MIB::agentSwitchMFDBFilteringPortMask,OCTET,read-only,,current,,BitMask indicating which ports this entry indicates should be filtered. To obtain port numbers from interface numbers, use the objects agentPortDot1dBasePort and agentPortIfIndex in the agentPortConfigTable table.
.1.3.6.1.4.1.4526.11.1.2.8.10.2,NETGEAR-SWITCHING-MIB::agentSwitchMFDBSummaryTable,,not-accessible,,current,,The Multicast Forwarding Database Summary table
.1.3.6.1.4.1.4526.11.1.2.8.10.2.1,NETGEAR-SWITCHING-MIB::agentSwitchMFDBSummaryEntry,,not-accessible,agentSwitchMFDBSummaryVlanId:agentSwitchMFDBSummaryMacAddress,current,,Summarizes the forwarding ports for all components registered for all MFDB table entries with the same Vlan Index and MAC Address.
.1.3.6.1.4.1.4526.11.1.2.8.10.2.1.1,NETGEAR-SWITCHING-MIB::agentSwitchMFDBSummaryVlanId,Unsigned32,read-only,,current,,Vlan Index for which this entry is associated with.
.1.3.6.1.4.1.4526.11.1.2.8.10.2.1.2,NETGEAR-SWITCHING-MIB::agentSwitchMFDBSummaryMacAddress,OCTET,read-only,,current,,A multicast MAC address for which the switch has forwarding and or filtering information.
.1.3.6.1.4.1.4526.11.1.2.8.10.2.1.3,NETGEAR-SWITCHING-MIB::agentSwitchMFDBSummaryForwardingPortMask,OCTET,read-only,,current,,Port Mask indicating which ports this entry indicates should be forwarded. To obtain port numbers from interface numbers, use the objects agentPortDot1dBasePort and agentPortIfIndex in the agentPortConfigTable table.
.1.3.6.1.4.1.4526.11.1.2.8.10.3,NETGEAR-SWITCHING-MIB::agentSwitchMFDBMaxTableEntries,Gauge32,read-only,,current,,This displays the maximum number of entries that can possibly be in the Multicast Forwarding Database table.
.1.3.6.1.4.1.4526.11.1.2.8.10.4,NETGEAR-SWITCHING-MIB::agentSwitchMFDBMostEntriesUsed,Gauge32,read-only,,current,,This displays the largest number of entries that have been present in the Multicast Forwarding Database table. This value is also known as the MFDB high-water mark.
.1.3.6.1.4.1.4526.11.1.2.8.10.5,NETGEAR-SWITCHING-MIB::agentSwitchMFDBCurrentEntries,Gauge32,read-only,,current,,This displays the current number of entries in the Multicast Forwarding Database table.
.1.3.6.1.4.1.4526.11.1.2.8.12,NETGEAR-SWITCHING-MIB::agentSwitchStormControlGroup,,,,,,
.1.3.6.1.4.1.4526.11.1.2.8.12.1,NETGEAR-SWITCHING-MIB::agentSwitchDot3FlowControlMode,INTEGER,read-write,,current,enable(1):disable(2),Config switchconfig flowcontrol allows you to enable or disable 802.3x flow control for the switch. This value applies to only full-duplex mode ports. 
.1.3.6.1.4.1.4526.11.1.2.8.12.4,NETGEAR-SWITCHING-MIB::agentSwitchBroadcastControlMode,INTEGER,read-write,,current,enable(1):disable(2),The switch config broadcast allows you to enable or disable broadcast storm recovery mode. When you specify Enable for Broadcast Storm Recovery and the broadcast traffic on any Ethernet port exceeds the configured threshold, the switch blocks (discards) the broadcast traffic.
.1.3.6.1.4.1.4526.11.1.2.8.12.5,NETGEAR-SWITCHING-MIB::agentSwitchBroadcastControlThreshold,Unsigned32,read-write,,current,,Configures the broadcast storm recovery threshold for this port as a percentage of port speed.
.1.3.6.1.4.1.4526.11.1.2.8.12.6,NETGEAR-SWITCHING-MIB::agentSwitchMulticastControlMode,INTEGER,read-write,,current,enable(1):disable(2),The switch config multicast allows you to enable or disable multicast storm recovery mode. When you specify Enable for multicast Storm Recovery and the multicast traffic on any Ethernet port exceeds the configured threshold, the switch blocks (discards) the multicast traffic.
.1.3.6.1.4.1.4526.11.1.2.8.12.7,NETGEAR-SWITCHING-MIB::agentSwitchMulticastControlThreshold,Unsigned32,read-write,,current,,Configures the multicast storm recovery threshold for this port as a percentage of port speed.
.1.3.6.1.4.1.4526.11.1.2.8.12.8,NETGEAR-SWITCHING-MIB::agentSwitchUnicastControlMode,INTEGER,read-write,,current,enable(1):disable(2),The switch config unicast allows you to enable or disable unicast storm recovery mode. When you specify Enable for unicast Storm Recovery and the unknown unicast traffic on any Ethernet port exceeds the configured threshold, the switch blocks (discards) the unknown unicast traffic.
.1.3.6.1.4.1.4526.11.1.2.8.12.9,NETGEAR-SWITCHING-MIB::agentSwitchUnicastControlThreshold,Unsigned32,read-write,,current,,Configures the unicast storm recovery threshold for this port as a percentage of port speed.
.1.3.6.1.4.1.4526.11.1.2.8.15,NETGEAR-SWITCHING-MIB::agentDhcpFilteringGroup,,,,,,
.1.3.6.1.4.1.4526.11.1.2.8.15.1,NETGEAR-SWITCHING-MIB::agentDhcpFilteringAdminMode,INTEGER,read-write,,current,enable(1):disable(2),Dhcp Filtering mode: enable - enable dhcp filtering mode disable - disable dhcp filtering mode.
.1.3.6.1.4.1.4526.11.1.2.8.15.2,NETGEAR-SWITCHING-MIB::agentDhcpFilteringPortConfigTable,,not-accessible,,current,,A table that contains the configuration objects for the with each port.
.1.3.6.1.4.1.4526.11.1.2.8.15.2.1,NETGEAR-SWITCHING-MIB::agentDhcpFilteringPortConfigEntry,,not-accessible,ifIndex,current,,The configuration information for Dhcp Filtering.
.1.3.6.1.4.1.4526.11.1.2.8.15.2.1.1,NETGEAR-SWITCHING-MIB::agentDhcpFilteringPortTrustedMode,INTEGER,read-write,,current,trusted(1):untrusted(2),Port's DHCP mode. It can be either trusted or untrusted default will be untrusted.
.1.3.6.1.4.1.4526.11.1.2.8.18,NETGEAR-SWITCHING-MIB::agentSwitchProtectedPortConfigGroup,,,,,,
.1.3.6.1.4.1.4526.11.1.2.8.18.1,NETGEAR-SWITCHING-MIB::agentSwitchProtectedPortTable,,not-accessible,,current,,The switch's protected port mapping table
.1.3.6.1.4.1.4526.11.1.2.8.18.1.1,NETGEAR-SWITCHING-MIB::agentSwitchProtectedPortEntry,,not-accessible,agentSwitchProtectedPortGroupId,current,,Protected ports assigned to groups.
.1.3.6.1.4.1.4526.11.1.2.8.18.1.1.1,NETGEAR-SWITCHING-MIB::agentSwitchProtectedPortGroupId,Integer32,not-accessible,,current,,The group that this port belongs to
.1.3.6.1.4.1.4526.11.1.2.8.18.1.1.2,NETGEAR-SWITCHING-MIB::agentSwitchProtectedPortGroupName,OCTET,read-write,,current,,The name of the group
.1.3.6.1.4.1.4526.11.1.2.8.18.1.1.3,NETGEAR-SWITCHING-MIB::agentSwitchProtectedPortPortList,OCTET,read-write,,current,,The set of ports that are protected in this group
.1.3.6.1.4.1.4526.11.1.2.8.20,NETGEAR-SWITCHING-MIB::agentSwitchSnoopingQuerierGroup,,,,,,
.1.3.6.1.4.1.4526.11.1.2.8.20.1,NETGEAR-SWITCHING-MIB::agentSwitchSnoopingQuerierCfgTable,,not-accessible,,current,,A table of the IGMP/MLD Snooping Querier Global configuration entries.
.1.3.6.1.4.1.4526.11.1.2.8.20.1.1,NETGEAR-SWITCHING-MIB::agentSwitchSnoopingQuerierCfgEntry,,not-accessible,agentSwitchSnoopingProtocol,current,,Represents entry for Snooping Querier Configuration.
.1.3.6.1.4.1.4526.11.1.2.8.20.1.1.1,NETGEAR-SWITCHING-MIB::agentSwitchSnoopingQuerierAdminMode,INTEGER,read-write,,current,enable(1):disable(2),This enables or disables Snooping Querier on the system. 
.1.3.6.1.4.1.4526.11.1.2.8.20.1.1.2,NETGEAR-SWITCHING-MIB::agentSwitchSnoopingQuerierVersion,Integer32,read-write,,current,,This specifies the multicast protocol versions that are supported by the system.
.1.3.6.1.4.1.4526.11.1.2.8.20.1.1.3,NETGEAR-SWITCHING-MIB::agentSwitchSnoopingQuerierAddress,OCTET,read-write,,current,,This specifies the default source ip address to be used while generating general queries.
.1.3.6.1.4.1.4526.11.1.2.8.20.1.1.4,NETGEAR-SWITCHING-MIB::agentSwitchSnoopingQuerierQueryInterval,Integer32,read-write,,current,,This specified the timer interval after which the system generates general queries.
.1.3.6.1.4.1.4526.11.1.2.8.20.1.1.5,NETGEAR-SWITCHING-MIB::agentSwitchSnoopingQuerierExpiryInterval,Integer32,read-write,,current,,This specified the timer interval after which the detected other querier information is no longer valid.
.1.3.6.1.4.1.4526.11.1.2.8.20.2,NETGEAR-SWITCHING-MIB::agentSwitchSnoopingQuerierVlanTable,,not-accessible,,current,,A table of the Snooping Querier Vlan configuration entries.
.1.3.6.1.4.1.4526.11.1.2.8.20.2.1,NETGEAR-SWITCHING-MIB::agentSwitchSnoopingQuerierVlanEntry,,not-accessible,dot1qVlanIndex:agentSwitchSnoopingProtocol,current,,Represents entry for a Snooping Querier configurable Vlan.
.1.3.6.1.4.1.4526.11.1.2.8.20.2.1.1,NETGEAR-SWITCHING-MIB::agentSwitchSnoopingQuerierVlanAdminMode,INTEGER,read-write,,current,disable(0):enable(1),This enables or disables Snooping Querier on a selected Vlan interface.
.1.3.6.1.4.1.4526.11.1.2.8.20.2.1.2,NETGEAR-SWITCHING-MIB::agentSwitchSnoopingQuerierVlanOperMode,INTEGER,read-only,,current,disabled(0):querier(1):non-querier(2),This specifies the current state of the Snooping Querier on a selected vlan interface
.1.3.6.1.4.1.4526.11.1.2.8.20.2.1.3,NETGEAR-SWITCHING-MIB::agentSwitchSnoopingQuerierElectionParticipateMode,INTEGER,read-write,,current,disable(0):enable(1),This enables or disables the Snooping Querier Election Participation mode. When enabled snooping querier switch will participate in querier election up on discovering another querier in the specified vlan. When disabled, up on discovering another querier, snooping querier moves to non-querier state.
.1.3.6.1.4.1.4526.11.1.2.8.20.2.1.4,NETGEAR-SWITCHING-MIB::agentSwitchSnoopingQuerierVlanAddress,OCTET,read-write,,current,,This specifies the default source ip address to be used while generating general queries on the specified vlan.
.1.3.6.1.4.1.4526.11.1.2.8.20.2.1.5,NETGEAR-SWITCHING-MIB::agentSwitchSnoopingQuerierOperVersion,Integer32,read-only,,current,,This specifies the multicast protocol version that is currently being used by the snooping switch for the specified vlan while generating query messages.
.1.3.6.1.4.1.4526.11.1.2.8.20.2.1.6,NETGEAR-SWITCHING-MIB::agentSwitchSnoopingQuerierOperMaxResponseTime,Integer32,read-only,,current,,The amount of time in seconds a switch will wait after sending a query on the selected vlan because it did not receive a report for a particular group in the interface participating in the vlan. This object is valid only when agentSwitchSnoopingQuerierOperVersion object is valid.
.1.3.6.1.4.1.4526.11.1.2.8.20.2.1.7,NETGEAR-SWITCHING-MIB::agentSwitchSnoopingQuerierLastQuerierAddress,OCTET,read-only,,current,,This specifies the last querier's ip address for the specified vlan. It represents the detected other multicast querier in the vlan. 
.1.3.6.1.4.1.4526.11.1.2.8.20.2.1.8,NETGEAR-SWITCHING-MIB::agentSwitchSnoopingQuerierLastQuerierVersion,Integer32,read-only,,current,,This specifies the multicast protocol version that is currently being used by the detected other multicast querier for the specified vlan.
.1.3.6.1.4.1.4526.11.1.2.8.21,NETGEAR-SWITCHING-MIB::agentSwitchGreenModeGroup,,,,,,
.1.3.6.1.4.1.4526.11.1.2.8.21.1,NETGEAR-SWITCHING-MIB::agentSwitchShortCableGlobalMode,INTEGER,read-write,,current,enable(1):disable(2),Enable/disable short cable mode globally
.1.3.6.1.4.1.4526.11.1.2.9,NETGEAR-SWITCHING-MIB::agentTransferConfigGroup,,,,,,
.1.3.6.1.4.1.4526.11.1.2.9.1,NETGEAR-SWITCHING-MIB::agentTransferUploadGroup,,,,,,
.1.3.6.1.4.1.4526.11.1.2.9.1.1,NETGEAR-SWITCHING-MIB::agentTransferUploadMode,INTEGER,read-write,,current,tftp(1):xmodem(2):ymodem(3):zmodem(4):sftp(5):scp(6),Transfer upload mode configures the mode to use when uploading from the switch. The mode is either X/Y/ZMODEM, TFTP, SFTP or SCP. X/Y/ZMODEM is valid only when the file transfer is initiated by the serial EIA 232 port. SFTP and SCP are only allowed if the SSH feature is present. 
.1.3.6.1.4.1.4526.11.1.2.9.1.2,NETGEAR-SWITCHING-MIB::agentTransferUploadServerIP,IpAddress,read-write,,deprecated,,Transfer upload server IP configures the IP address of the server where the file is located. It is valid only when the Transfer Mode is TFTP, SFTP, or SCP. The address is 4 integer bytes ranging from 0 to 255. This object is deprecated in favour of agentTransferUploadServerAddress and agentTransferUploadServerAddressType.
.1.3.6.1.4.1.4526.11.1.2.9.1.3,NETGEAR-SWITCHING-MIB::agentTransferUploadPath,OCTET,read-write,,current,,Transfer upload path configures the directory path where the file is to be uploaded to. The switch remembers the last file path used. 
.1.3.6.1.4.1.4526.11.1.2.9.1.4,NETGEAR-SWITCHING-MIB::agentTransferUploadFilename,OCTET,read-write,,current,,Transfer upload filename configures the file name for the file being uploaded from the switch. It can be up to 32 alphanumeric characters. The switch remembers the last file name used. File path can be appended to the file name if the string is less than 17 characters. Otherwise, the File Path field will need to be used and the File Name will be appended to the File Path as is. An example would be File Path set to c:\tftp\code\ and File Name set to e1r1v1.opr. Note: File Name, File Path, and Server IP Address are applicable only if the Transfer Mode is TFTP, SFTP or SCP.
.1.3.6.1.4.1.4526.11.1.2.9.1.5,NETGEAR-SWITCHING-MIB::agentTransferUploadDataType,INTEGER,read-write,,current,config(2):errorlog(3):messagelog(4):traplog(5):clibanner(6):code(7),Transfer upload datatype configures the type of file to upload from the switch. The types for upload are: - Configuration File - Error log - Message log - Trap log - Banner File 
.1.3.6.1.4.1.4526.11.1.2.9.1.6,NETGEAR-SWITCHING-MIB::agentTransferUploadStart,INTEGER,read-write,,current,enable(1):disable(2),Transfer upload start will start an upload transfer. The agentTransferUploadMode object must not be set to xmodem(2), ymodem(3), or zmodem(4) to initiate a transfer via SNMP.
.1.3.6.1.4.1.4526.11.1.2.9.1.7,NETGEAR-SWITCHING-MIB::agentTransferUploadStatus,INTEGER,read-only,,current,notInitiated(1):transferStarting(2):errorStarting(3):wrongFileType(4):updatingConfig(5):invalidConfigFile(6):writingToFlash(7):failureWritingToFlash(8):checkingCRC(9):failedCRC(10):unknownDirection(11):transferSuccessful(12):transferFailed(13),Indicates the current status of an upload transfer.
.1.3.6.1.4.1.4526.11.1.2.9.1.8,NETGEAR-SWITCHING-MIB::agentTransferUploadServerAddressType,INTEGER,read-write,,current,unknown(0):ipv4(1):ipv6(2):ipv4z(3):ipv6z(4):dns(16),The type of the serverip address, as defined in the InetAddress MIB. The agentTransferUploadServerAddress object is intepreted within the context of agentTransferUploadServerAddressType
.1.3.6.1.4.1.4526.11.1.2.9.1.9,NETGEAR-SWITCHING-MIB::agentTransferUploadServerAddress,OCTET,read-write,,current,,Transfer upload serverip configures the IP address of the server where the file is to be uploaded to.It is valid only when the Transfer Mode is TFTP, SFTP or SCP. The type of this address is determined by the value of the agentTransferUploadServerAddressType object. The values for agentTransferUploadServerAddressType and agentTransferUploadServerAddress must be consistent.
.1.3.6.1.4.1.4526.11.1.2.9.1.10,NETGEAR-SWITCHING-MIB::agentTransferUploadImagename,INTEGER,read-write,,current,image1(2):image2(3),Transfer upload image name. Sets the image to be uploaded as the specified name Note: Imagename, File Name, File Path, and Server IP Address are applicable only if the Transfer Mode is TFTP, SFTP or SCP.
.1.3.6.1.4.1.4526.11.1.2.9.1.11,NETGEAR-SWITCHING-MIB::agentTransferUploadUsername,OCTET,read-write,,current,,Username applicable only to secure upload types, i.e., SFTP or SCP. 
.1.3.6.1.4.1.4526.11.1.2.9.1.12,NETGEAR-SWITCHING-MIB::agentTransferUploadPassword,OCTET,read-write,,current,,Password applicable only to secure upload types, i.e. SFTP or SCP. 
.1.3.6.1.4.1.4526.11.1.2.9.2,NETGEAR-SWITCHING-MIB::agentTransferDownloadGroup,,,,,,
.1.3.6.1.4.1.4526.11.1.2.9.2.1,NETGEAR-SWITCHING-MIB::agentTransferDownloadMode,INTEGER,read-write,,current,tftp(1):xmodem(2):ymodem(3):zmodem(4):sftp(5):scp(6),Transfer download mode configures the mode to use when downloading to the switch. The mode is either X/Y/ZMODEM, TFTP, SFTP or SCP. X/Y/ZMODEM is valid only when the file transfer is initiated by the serial EIA 232 port. SFTP and SCP are only allowed if the SSH feature is present. 
.1.3.6.1.4.1.4526.11.1.2.9.2.2,NETGEAR-SWITCHING-MIB::agentTransferDownloadServerIP,IpAddress,read-write,,deprecated,,Transfer download serverip configures the IP address of the server where the file is located. It is valid only when the Transfer Mode is TFTP, SFTP or SCP. The address is 4 integer bytes ranging from 0 to 255. This object is deprecated in favour of agentTransferDownloadServerAddress and agentTransferDownloadServerAddressType.
.1.3.6.1.4.1.4526.11.1.2.9.2.3,NETGEAR-SWITCHING-MIB::agentTransferDownloadPath,OCTET,read-write,,current,,Transfer download path configures the directory path where the file is located. The switch remembers the last file path used. 
.1.3.6.1.4.1.4526.11.1.2.9.2.4,NETGEAR-SWITCHING-MIB::agentTransferDownloadFilename,OCTET,read-write,,current,,Transfer download filename configures the file name for the file being downloaded to the switch. It can be up to 32 alphanumeric characters. The switch remembers the last file name used. File path can be appended to the file name if the string is less than 33 characters. Otherwise, the File Path field will need to be used and the File Name will be appended to the File Path as is. An example would be File Path set to c:\tftp\code\ and File Name set to e1r1v1.opr. Note: Imagename, File Name, File Path, and Server IP Address are applicable only if the Transfer Mode is TFTP, SFTP or SCP.
.1.3.6.1.4.1.4526.11.1.2.9.2.5,NETGEAR-SWITCHING-MIB::agentTransferDownloadDataType,INTEGER,read-write,,current,code(2):config(3):sshkey-rsa1(4):sshkey-rsa2(5):sshkey-dsa(6):sslpem-root(7):sslpem-server(8):sslpem-dhweak(9):sslpem-dhstrong(10):clibanner(11):kernel(12),Transfer download datatype configures the type of file to download to the switch. The types for download are: code - Code File config - Configuration File sshkey-rsa1 - SSH-1 RSA Key File sshkey-rsa2 - SSH-2 RSA Key PEM File sshkey-dsa - SSH-2 DSA Key PEM File sslpem-root - SSL Trusted Root Certificate PEM File sslpem-server - SSL Server Certificate PEM File sslpem-dhweak - SSL DH Weak Encryption Parameter PEM File sslpem-dhstrong - SSL DH Strong Encryption Parameter PEM File cli-banner - CLI Banner File kernel - Kernel File Note: SSH Key files can only be downloaded if SSH Server is administratively disabled, and there are no active SSH sessions. Kernel file can be downloaded only on raptor platform and linux operating system. 
.1.3.6.1.4.1.4526.11.1.2.9.2.6,NETGEAR-SWITCHING-MIB::agentTransferDownloadStart,INTEGER,read-write,,current,enable(1):disable(2),Transfer download start will start an download transfer. The agentTransferDownloadMode object must not be set to xmodem(2), ymodem(3), or zmodem(4) to initiate a transfer via SNMP.
.1.3.6.1.4.1.4526.11.1.2.9.2.7,NETGEAR-SWITCHING-MIB::agentTransferDownloadStatus,INTEGER,read-only,,current,notInitiated(1):transferStarting(2):errorStarting(3):wrongFileType(4):updatingConfig(5):invalidConfigFile(6):writingToFlash(7):failureWritingToFlash(8):checkingCRC(9):failedCRC(10):unknownDirection(11):transferSuccessful(12):transferFailed(13),Indicates the current status of an download transfer.
.1.3.6.1.4.1.4526.11.1.2.9.2.8,NETGEAR-SWITCHING-MIB::agentTransferDownloadServerAddressType,INTEGER,read-write,,current,unknown(0):ipv4(1):ipv6(2):ipv4z(3):ipv6z(4):dns(16),The type of the serverip address, as defined in the InetAddress MIB. The agentTransferDownloadServerAddress object is intepreted within the context of agentTransferDownloadServerAddressType
.1.3.6.1.4.1.4526.11.1.2.9.2.9,NETGEAR-SWITCHING-MIB::agentTransferDownloadServerAddress,OCTET,read-write,,current,,Transfer download serverip configures the IP address of the server where the file is to be downloaded from.It is valid only when the Transfer Mode is TFTP, SFTP, or SCP. The type of this address is determined by the value of the agentTransferDownloadServerAddressType object. The values for agentTransferDownloadServerAddressType and agentTransferDownloadServerAddress must be consistent.
.1.3.6.1.4.1.4526.11.1.2.9.2.10,NETGEAR-SWITCHING-MIB::agentTransferDownloadImagename,INTEGER,read-write,,current,image1(2):image2(3),Transfer download image name. Sets the downloaded image as the specified name Note: Imagename, File Name, File Path, and Server IP Address are applicable only if the Transfer Mode is TFTP, SFTP or SCP.
.1.3.6.1.4.1.4526.11.1.2.9.2.11,NETGEAR-SWITCHING-MIB::agentTransferDownloadUsername,OCTET,read-write,,current,,Username applicable only to secure download types, i.e., SFTP or SCP. 
.1.3.6.1.4.1.4526.11.1.2.9.2.12,NETGEAR-SWITCHING-MIB::agentTransferDownloadPassword,OCTET,read-write,,current,,Password applicable only to secure download types, i.e. SFTP or SCP. 
.1.3.6.1.4.1.4526.11.1.2.9.3,NETGEAR-SWITCHING-MIB::agentImageConfigGroup,,,,,,
.1.3.6.1.4.1.4526.11.1.2.9.3.1,NETGEAR-SWITCHING-MIB::agentImage1,OCTET,read-only,,current,,The image1 softwate version .
.1.3.6.1.4.1.4526.11.1.2.9.3.2,NETGEAR-SWITCHING-MIB::agentImage2,OCTET,read-only,,current,,The image2 software version.
.1.3.6.1.4.1.4526.11.1.2.9.3.3,NETGEAR-SWITCHING-MIB::agentActiveImage,OCTET,read-only,,current,,The active image name. image1 or image2. 
.1.3.6.1.4.1.4526.11.1.2.9.3.4,NETGEAR-SWITCHING-MIB::agentNextActiveImage,OCTET,read-write,,current,,The next active image name. user assigns either image1 or image2. 
.1.3.6.1.4.1.4526.11.1.2.10,NETGEAR-SWITCHING-MIB::agentPortMirroringGroup,,,,,,
.1.3.6.1.4.1.4526.11.1.2.10.1,NETGEAR-SWITCHING-MIB::agentMirroredPortIfIndex,Integer32,read-write,,obsolete,,IfIndex of the mirrored port
.1.3.6.1.4.1.4526.11.1.2.10.2,NETGEAR-SWITCHING-MIB::agentProbePortIfIndex,Integer32,read-write,,obsolete,,IfIndex of the probe port
.1.3.6.1.4.1.4526.11.1.2.10.3,NETGEAR-SWITCHING-MIB::agentPortMirroringMode,INTEGER,read-write,,obsolete,enable(1):disable(2):delete(3),Port mirroring mode: enable - enable mirroring mode disable - disable mirroring mode delete - clear MirroredPort and Probe Port configuration
.1.3.6.1.4.1.4526.11.1.2.10.4,NETGEAR-SWITCHING-MIB::agentPortMirrorTable,,not-accessible,,current,,This table includes entries for each Port Mirroring session.
.1.3.6.1.4.1.4526.11.1.2.10.4.1,NETGEAR-SWITCHING-MIB::agentPortMirrorEntry,,not-accessible,agentPortMirrorSessionNum,current,,Provides configuration of a Port Mirroring session specifying the destination port, and the source Port Mask, providing a many-to-one mapping.
.1.3.6.1.4.1.4526.11.1.2.10.4.1.1,NETGEAR-SWITCHING-MIB::agentPortMirrorSessionNum,Unsigned32,not-accessible,,current,,The Session number of this mirroring entry. The number of sessions is fixed, and is platform dependant.
.1.3.6.1.4.1.4526.11.1.2.10.4.1.2,NETGEAR-SWITCHING-MIB::agentPortMirrorDestinationPort,Unsigned32,read-write,,current,,The port which traffic from the mirrored ports will be sent to.
.1.3.6.1.4.1.4526.11.1.2.10.4.1.3,NETGEAR-SWITCHING-MIB::agentPortMirrorSourcePortMask,OCTET,read-write,,current,,The ports from which traffic will be sent to the destination port. The destination port can not be included in this list of ports.
.1.3.6.1.4.1.4526.11.1.2.10.4.1.4,NETGEAR-SWITCHING-MIB::agentPortMirrorAdminMode,INTEGER,read-write,,current,enable(1):disable(2):delete(3),The status of this port mirroring session. enable(1) - This session is active and all traffic from the source ports will be mirrored to the destination port. disable(2) - This session is not active. delete(3) - Remove the configuration for this Session
.1.3.6.1.4.1.4526.11.1.2.10.5,NETGEAR-SWITCHING-MIB::agentPortMirrorTypeTable,,not-accessible,,current,,This table includes entries for each source port's direction of port mirroring.
.1.3.6.1.4.1.4526.11.1.2.10.5.1,NETGEAR-SWITCHING-MIB::agentPortMirrorTypeEntry,,not-accessible,agentPortMirrorSessionNum:agentPortMirrorTypeSourcePort,current,,Provides configuration of a Port Mirroring direction specifying the session of the port mirroring and source port
.1.3.6.1.4.1.4526.11.1.2.10.5.1.1,NETGEAR-SWITCHING-MIB::agentPortMirrorTypeSourcePort,Unsigned32,not-accessible,,current,,The port from which traffic will be sent to the destination port. This port should be a source port in the corresponding session
.1.3.6.1.4.1.4526.11.1.2.10.5.1.2,NETGEAR-SWITCHING-MIB::agentPortMirrorTypeType,INTEGER,read-write,,current,tx(1):rx(2):txrx(3),The direction of the data to be mirrored on this source port. tx(1) - The data that is transmitted from the source port. rx(2) - The data that is received on the source port. txrx(3) - The data that is transmitted/received from/on the source port
.1.3.6.1.4.1.4526.11.1.2.12,NETGEAR-SWITCHING-MIB::agentDot3adAggPortTable,,not-accessible,,current,,This table provides 802.3ad link aggregation information for each physical port that is not available through the standard MIB.
.1.3.6.1.4.1.4526.11.1.2.12.1,NETGEAR-SWITCHING-MIB::agentDot3adAggPortEntry,,not-accessible,agentDot3adAggPort,current,,Information about a table entry. The agentDot3adAggPort identifies the external interface number of the port.
.1.3.6.1.4.1.4526.11.1.2.12.1.1,NETGEAR-SWITCHING-MIB::agentDot3adAggPort,Integer32,read-only,,current,,ifIndex of this physical port
.1.3.6.1.4.1.4526.11.1.2.12.1.2,NETGEAR-SWITCHING-MIB::agentDot3adAggPortLACPMode,INTEGER,read-write,,current,enable(1):disable(2),Enable/disable 802.3ad LACP on this port
.1.3.6.1.4.1.4526.11.1.2.13,NETGEAR-SWITCHING-MIB::agentPortConfigTable,,not-accessible,,current,,A table of the switch's physical port config entries
.1.3.6.1.4.1.4526.11.1.2.13.1,NETGEAR-SWITCHING-MIB::agentPortConfigEntry,,not-accessible,agentPortDot1dBasePort,current,,Switch's physical port config entry
.1.3.6.1.4.1.4526.11.1.2.13.1.1,NETGEAR-SWITCHING-MIB::agentPortDot1dBasePort,Integer32,read-only,,current,,The port number of this port.
.1.3.6.1.4.1.4526.11.1.2.13.1.2,NETGEAR-SWITCHING-MIB::agentPortIfIndex,Integer32,read-only,,current,,The switch's Port IfIndex
.1.3.6.1.4.1.4526.11.1.2.13.1.3,NETGEAR-SWITCHING-MIB::agentPortIanaType,INTEGER,read-only,,current,other(1):regular1822(2):hdh1822(3):ddnX25(4):rfc877x25(5):ethernetCsmacd(6):iso88023Csmacd(7):iso88024TokenBus(8):iso88025TokenRing(9):iso88026Man(10):starLan(11):proteon10Mbit(12):proteon80Mbit(13):hyperchannel(14):fddi(15):lapb(16):sdlc(17):ds1(18):e1(19):basicISDN(20):primaryISDN(21):propPointToPointSerial(22):ppp(23):softwareLoopback(24):eon(25):ethernet3Mbit(26):nsip(27):slip(28):ultra(29):ds3(30):sip(31):frameRelay(32):rs232(33):para(34):arcnet(35):arcnetPlus(36):atm(37):miox25(38):sonet(39):x25ple(40):iso88022llc(41):localTalk(42):smdsDxi(43):frameRelayService(44):v35(45):hssi(46):hippi(47):modem(48):aal5(49):sonetPath(50):sonetVT(51):smdsIcip(52):propVirtual(53):propMultiplexor(54):ieee80212(55):fibreChannel(56):hippiInterface(57):frameRelayInterconnect(58):aflane8023(59):aflane8025(60):cctEmul(61):fastEther(62):isdn(63):v11(64):v36(65):g703at64k(66):g703at2mb(67):qllc(68):fastEtherFX(69):channel(70):ieee80211(71):ibm370parChan(72):escon(73):dlsw(74):isdns(75):isdnu(76):lapd(77):ipSwitch(78):rsrb(79):atmLogical(80):ds0(81):ds0Bundle(82):bsc(83):async(84):cnr(85):iso88025Dtr(86):eplrs(87):arap(88):propCnls(89):hostPad(90):termPad(91):frameRelayMPI(92):x213(93):adsl(94):radsl(95):sdsl(96):vdsl(97):iso88025CRFPInt(98):myrinet(99):voiceEM(100):voiceFXO(101):voiceFXS(102):voiceEncap(103):voiceOverIp(104):atmDxi(105):atmFuni(106):atmIma(107):pppMultilinkBundle(108):ipOverCdlc(109):ipOverClaw(110):stackToStack(111):virtualIpAddress(112):mpc(113):ipOverAtm(114):iso88025Fiber(115):tdlc(116):gigabitEthernet(117):hdlc(118):lapf(119):v37(120):x25mlp(121):x25huntGroup(122):transpHdlc(123):interleave(124):fast(125):ip(126):docsCableMaclayer(127):docsCableDownstream(128):docsCableUpstream(129):a12MppSwitch(130):tunnel(131):coffee(132):ces(133):atmSubInterface(134):l2vlan(135):l3ipvlan(136):l3ipxvlan(137):digitalPowerline(138):mediaMailOverIp(139):dtm(140):dcn(141):ipForward(142):msdsl(143):ieee1394(144):if-gsn(145):dvbRccMacLayer(146):dvbRccDownstream(147):dvbRccUpstream(148):atmVirtual(149):mplsTunnel(150):srp(151):voiceOverAtm(152):voiceOverFrameRelay(153):idsl(154):compositeLink(155):ss7SigLink(156):propWirelessP2P(157):frForward(158):rfc1483(159):usb(160):ieee8023adLag(161):bgppolicyaccounting(162):frf16MfrBundle(163):h323Gatekeeper(164):h323Proxy(165):mpls(166):mfSigLink(167):hdsl2(168):shdsl(169):ds1FDL(170):pos(171):dvbAsiIn(172):dvbAsiOut(173):plc(174):nfas(175):tr008(176):gr303RDT(177):gr303IDT(178):isup(179):propDocsWirelessMaclayer(180):propDocsWirelessDownstream(181):propDocsWirelessUpstream(182):hiperlan2(183):propBWAp2Mp(184):sonetOverheadChannel(185):digitalWrapperOverheadChannel(186):aal2(187):radioMAC(188):atmRadio(189):imt(190):mvl(191):reachDSL(192):frDlciEndPt(193):atmVciEndPt(194):opticalChannel(195):opticalTransport(196):propAtm(197):voiceOverCable(198):infiniband(199):teLink(200):q2931(201):virtualTg(202):sipTg(203):sipSig(204):docsCableUpstreamChannel(205):econet(206):pon155(207):pon622(208):bridge(209):linegroup(210):voiceEMFGD(211):voiceFGDEANA(212):voiceDID(213):mpegTransport(214):sixToFour(215):gtp(216):pdnEtherLoop1(217):pdnEtherLoop2(218):opticalChannelGroup(219):homepna(220):gfp(221):ciscoISLvlan(222):actelisMetaLOOP(223):fcipLink(224):rpr(225):qam(226):lmp(227):cblVectaStar(228):docsCableMCmtsDownstream(229):adsl2(230):macSecControlledIF(231):macSecUncontrolledIF(232):aviciOpticalEther(233):atmbond(234):voiceFGDOS(235):mocaVersion1(236):ieee80216WMAN(237):adsl2plus(238):dvbRcsMacLayer(239):dvbTdm(240):dvbRcsTdma(241):x86Laps(242):wwanPP(243):wwanPP2(244):voiceEBS(245):ifPwType(246):ilan(247):pip(248):aluELP(249):gpon(250):vdsl2(251):capwapDot11Profile(252):capwapDot11Bss(253):capwapWtpVirtualRadio(254):bits(255):docsCableUpstreamRfPort(256):cableDownstreamRfPort(257):vmwareVirtualNic(258):ieee802154(259):otnOdu(260):otnOtu(261):ifVfiType(262):g9981(263):g9982(264):g9983(265):aluEpon(266):aluEponOnu(267):aluEponPhysicalUni(268):aluEponLogicalLink(269):aluGponOnu(270):aluGponPhysicalUni(271):vmwareNicTeam(272):docsOfdmDownstream(277):docsOfdmaUpstream(278):gfast(279):sdci(280):xboxWireless(281):fastdsl(282):docsCableScte55d1FwdOob(283):docsCableScte55d1RetOob(284):docsCableScte55d2DsOob(285):docsCableScte55d2UsOob(286):docsCableNdf(287):docsCableNdr(288):ptm(289):ghn(290):otnOtsi(291):otnOtuc(292):otnOduc(293):otnOtsig(294):microwaveCarrierTermination(295):microwaveRadioLinkTerminal(296),The switch's Port Type
.1.3.6.1.4.1.4526.11.1.2.13.1.4,NETGEAR-SWITCHING-MIB::agentPortSTPMode,INTEGER,read-write,,current,dot1d(1):fast(2):off(3),The switch's Port Spanning Tree Protocol Mode STP mode values are: dot1d (the default) fast, indicates you want to use the fast spanning tree mode off, indicates the STP mode is turned off for a particular port This object is only supported when the Dot1d Protocol is enabled.
.1.3.6.1.4.1.4526.11.1.2.13.1.5,NETGEAR-SWITCHING-MIB::agentPortSTPState,INTEGER,read-only,,current,blocking(1):listening(2):learning(3):forwarding(4):disabled(5),The switch's Port Spanning Tree Protocol State. This object is only supported when the Dot1d Protocol is enabled.
.1.3.6.1.4.1.4526.11.1.2.13.1.6,NETGEAR-SWITCHING-MIB::agentPortAdminMode,INTEGER,read-write,,current,enable(1):disable(2),The switch's Port Admin Mode
.1.3.6.1.4.1.4526.11.1.2.13.1.7,NETGEAR-SWITCHING-MIB::agentPortPhysicalMode,INTEGER,read-write,,obsolete,auto-negotiate(1):half-10(2):full-10(3):half-100(4):full-100(5):half-100fx(6):full-100fx(7):full-1000sx(8):full-10gsx(9),The switch's Port Speed Mode. This is the configured physical mode. This object is read-only for gigabit ports
.1.3.6.1.4.1.4526.11.1.2.13.1.8,NETGEAR-SWITCHING-MIB::agentPortPhysicalStatus,INTEGER,read-only,,obsolete,auto-negotiate(1):half-10(2):full-10(3):half-100(4):full-100(5):half-100fx(6):full-100fx(7):full-1000sx(8):full-10gsx(9),The switch's Port Physical Speed Status. This is the current actual speed.
.1.3.6.1.4.1.4526.11.1.2.13.1.9,NETGEAR-SWITCHING-MIB::agentPortLinkTrapMode,INTEGER,read-write,,current,enable(1):disable(2),If enabled, link up and link down traps will be sent for this port.
.1.3.6.1.4.1.4526.11.1.2.13.1.10,NETGEAR-SWITCHING-MIB::agentPortClearStats,INTEGER,read-write,,current,enable(1):disable(2),clear stats for this port only
.1.3.6.1.4.1.4526.11.1.2.13.1.11,NETGEAR-SWITCHING-MIB::agentPortDefaultType,OBJECT,read-write,,current,,This object identifies the default administrative port type, to be used in conjunction with the operational port type denoted by agentPortType. The set of possible values for this object is the same as the set defined for the agentPortType object. This object represents the administratively-configured type of the MAU. If auto-negotiation is not enabled or is not implemented for this MAU, the value of this object determines the operational type of the MAU. In this case, a set to this object will force the MAU into the specified operating mode. If auto-negotiation is implemented and enabled for this MAU, the operational type of the MAU is determined by auto-negotiation, and the value of this object denotes the type to which the MAU will automatically revert if/when auto-negotiation is later disabled. The valid values for this object are: dot3MauType10BaseTHD dot3MauType10BaseTFD dot3MauType100BaseTXHD dot3MauType100BaseTXFD dot3MauType100BaseFXFD dot3MauType10GBaseSX
.1.3.6.1.4.1.4526.11.1.2.13.1.12,NETGEAR-SWITCHING-MIB::agentPortType,OBJECT,read-only,,current,,This object identifies the port type. An initial set of MAU types are defined in RFC 2668. The assignment of OBJECT IDENTIFIERs to new types of MAUs is managed by the IANA. If the MAU type is unknown, the object identifier unknownMauType OBJECT IDENTIFIER ::= { 0 0 } is returned. Note that unknownMauType is a syntactically valid object identifier, and any conformant implementation of ASN.1 and the BER must be able to generate and recognize this value. This object represents the operational type of the MAU, as determined by either (1) the result of the auto-negotiation function or (2) if auto-negotiation is not enabled or is not implemented for this MAU, by the value of the object agentPortDefaultType, or (3) for the GigE card a value determined by the GBIC connected to the card. In case (2), a set to the object agentPortDefaultType will force the MAU into the new operating mode. The valid values for this object are: dot3MauType10BaseTHD dot3MauType10BaseTFD dot3MauType100BaseTXHD dot3MauType100BaseTXFD dot3MauType100BaseFXFD dot3MauType1000BaseSXFD dot3MauType10GBaseSX
.1.3.6.1.4.1.4526.11.1.2.13.1.13,NETGEAR-SWITCHING-MIB::agentPortAutoNegAdminStatus,INTEGER,read-write,,current,enable(1):disable(2),This object identifies the administration status of auto negotiation for this port.
.1.3.6.1.4.1.4526.11.1.2.13.1.14,NETGEAR-SWITCHING-MIB::agentPortDot3FlowControlMode,INTEGER,read-write,,current,enable(1):disable(2),Config flowcontrol allows you to enable or disable 802.3x flow control for this port. This value applies to only full-duplex mode ports. 
.1.3.6.1.4.1.4526.11.1.2.13.1.18,NETGEAR-SWITCHING-MIB::agentPortMaxFrameSizeLimit,Integer32,read-only,,current,,This object identifies the largest value that can be configured for agentPortMaxFrameSize
.1.3.6.1.4.1.4526.11.1.2.13.1.19,NETGEAR-SWITCHING-MIB::agentPortMaxFrameSize,Integer32,read-write,,current,,This object identifies the currently configured maximum frame size value for this port. The maximmum value that this object can be set to is the value of agentPortMaxFrameSizeLimit. For Ethernet ports which support 802.1Q vlan tagging, the minimum value that this object can be set to is 1522
.1.3.6.1.4.1.4526.11.1.2.13.1.20,NETGEAR-SWITCHING-MIB::agentPortBroadcastControlMode,INTEGER,read-write,,current,enable(1):disable(2),If enabled, broadcast storm recovery will function on this port. When you specify Enable for Broadcast Storm Recovery and the broadcast traffic on this Ethernet port exceeds the configured threshold, the switch blocks (discards) the broadcast traffic.
.1.3.6.1.4.1.4526.11.1.2.13.1.21,NETGEAR-SWITCHING-MIB::agentPortBroadcastControlThreshold,Integer32,read-write,,current,,Configures the broadcast storm recovery threshold for this port as a percentage of port speed.
.1.3.6.1.4.1.4526.11.1.2.13.1.22,NETGEAR-SWITCHING-MIB::agentPortMulticastControlMode,INTEGER,read-write,,current,enable(1):disable(2),If enabled, multicast storm recovery will function on this port. When you specify Enable for Multicast Storm Recovery and the multicast traffic on this Ethernet port exceeds the configured threshold, the switch blocks (discards) the multicast traffic.
.1.3.6.1.4.1.4526.11.1.2.13.1.23,NETGEAR-SWITCHING-MIB::agentPortMulticastControlThreshold,Integer32,read-write,,current,,Configures the multicast storm recovery threshold for this port as a percentage of port speed.
.1.3.6.1.4.1.4526.11.1.2.13.1.24,NETGEAR-SWITCHING-MIB::agentPortUnicastControlMode,INTEGER,read-write,,current,enable(1):disable(2),If enabled, unicast storm recovery will function on this port. When you specify Enable for Unicast Storm Recovery and the unknown unicast traffic on this Ethernet port exceeds the configured threshold, the switch blocks (discards) the unknown unicast traffic.
.1.3.6.1.4.1.4526.11.1.2.13.1.25,NETGEAR-SWITCHING-MIB::agentPortUnicastControlThreshold,Integer32,read-write,,current,,Configures the unicast storm recovery threshold for this port as a percentage of port speed.
.1.3.6.1.4.1.4526.11.1.2.13.1.26,NETGEAR-SWITCHING-MIB::agentPortSleepMode,INTEGER,read-write,,current,enable(1):disable(2),Enable/disable sleep mode for green feature.
.1.3.6.1.4.1.4526.11.1.2.13.1.27,NETGEAR-SWITCHING-MIB::agentPortShortCableMode,INTEGER,read-write,,current,enable(1):disable(2),Enable/disable short cable mode for green feature.
.1.3.6.1.4.1.4526.11.1.2.15,NETGEAR-SWITCHING-MIB::agentStpSwitchConfigGroup,,,,,,
.1.3.6.1.4.1.4526.11.1.2.15.1,NETGEAR-SWITCHING-MIB::agentStpConfigDigestKey,OCTET,read-only,,current,,The MST configuration digest key.
.1.3.6.1.4.1.4526.11.1.2.15.2,NETGEAR-SWITCHING-MIB::agentStpConfigFormatSelector,Unsigned32,read-only,,current,,The MST configuration format selector. A value other than 0 (zero) indicates non-support for the IEEE 802.1s standard.
.1.3.6.1.4.1.4526.11.1.2.15.3,NETGEAR-SWITCHING-MIB::agentStpConfigName,OCTET,read-write,,current,,The MST configuration name of at most 32 characters.
.1.3.6.1.4.1.4526.11.1.2.15.4,NETGEAR-SWITCHING-MIB::agentStpConfigRevision,Unsigned32,read-write,,current,,The MST configuration revision. The default value is 1.
.1.3.6.1.4.1.4526.11.1.2.15.5,NETGEAR-SWITCHING-MIB::agentStpForceVersion,INTEGER,read-write,,current,dot1d(1):dot1w(2):dot1s(3),The MST configuration force protocol version. The default version is dot1s.
.1.3.6.1.4.1.4526.11.1.2.15.6,NETGEAR-SWITCHING-MIB::agentStpAdminMode,INTEGER,read-write,,current,enable(1):disable(2),The spanning tree operational status. enable(1) - enables spanning tree operational status on the switch. disable(2) - disables spanning tree operational status on the switch. The default status is disabled.
.1.3.6.1.4.1.4526.11.1.2.15.7,NETGEAR-SWITCHING-MIB::agentStpBpduGuardMode,INTEGER,read-write,,current,enable(1):disable(2),The spanning tree BPDU Guard Mode. enable(1) - enables BPDU Guard Mode on the switch. disable(2) - disables BPDU Guard Mode on the switch. The default status is disabled.
.1.3.6.1.4.1.4526.11.1.2.15.8,NETGEAR-SWITCHING-MIB::agentStpBpduFilterDefault,INTEGER,read-write,,current,enable(1):disable(2),The spanning tree BPDU Filter Mode, it enables BPDU Filter on all edge ports. enable(1) - enables BPDU Filter Mode on the switch. disable(2) - disables BPDU Filter Mode on the switch. The default status is disabled.
.1.3.6.1.4.1.4526.11.1.2.15.9,NETGEAR-SWITCHING-MIB::agentStpPortTable,,not-accessible,,current,,STP port table.
.1.3.6.1.4.1.4526.11.1.2.15.9.1,NETGEAR-SWITCHING-MIB::agentStpPortEntry,,not-accessible,ifIndex,current,,STP port entry.
.1.3.6.1.4.1.4526.11.1.2.15.9.1.1,NETGEAR-SWITCHING-MIB::agentStpPortState,INTEGER,read-write,,current,enable(1):disable(2),The administrative STP state for the port. enable(1) - enables STP on the port. disable(2) - disables STP on the port. The default port STP state is enabled for the first 4095 ports and disabled for any ports beyond.
.1.3.6.1.4.1.4526.11.1.2.15.9.1.2,NETGEAR-SWITCHING-MIB::agentStpPortStatsMstpBpduRx,Counter32,read-only,,current,,The MSTP BPDUs received on a specific port.
.1.3.6.1.4.1.4526.11.1.2.15.9.1.3,NETGEAR-SWITCHING-MIB::agentStpPortStatsMstpBpduTx,Counter32,read-only,,current,,The MSTP BPDUs sent from a specific port.
.1.3.6.1.4.1.4526.11.1.2.15.9.1.4,NETGEAR-SWITCHING-MIB::agentStpPortStatsRstpBpduRx,Counter32,read-only,,current,,The RSTP BPDUs received on a specific port.
.1.3.6.1.4.1.4526.11.1.2.15.9.1.5,NETGEAR-SWITCHING-MIB::agentStpPortStatsRstpBpduTx,Counter32,read-only,,current,,The RSTP BPDUs sent from a specific port.
.1.3.6.1.4.1.4526.11.1.2.15.9.1.6,NETGEAR-SWITCHING-MIB::agentStpPortStatsStpBpduRx,Counter32,read-only,,current,,The STP BPDUs received on a specific port.
.1.3.6.1.4.1.4526.11.1.2.15.9.1.7,NETGEAR-SWITCHING-MIB::agentStpPortStatsStpBpduTx,Counter32,read-only,,current,,The STP BPDUs sent from a specific port.
.1.3.6.1.4.1.4526.11.1.2.15.9.1.8,NETGEAR-SWITCHING-MIB::agentStpPortUpTime,TimeTicks,read-only,,current,,Time since port was reset. It is displayed in days, hours, minutes, and seconds.
.1.3.6.1.4.1.4526.11.1.2.15.9.1.9,NETGEAR-SWITCHING-MIB::agentStpPortMigrationCheck,INTEGER,read-write,,current,false(0):true(1),Force the specified port to transmit RSTP or MSTP BPDU's. Supported values: false(0) - BPDUs are not to be transmitted. true(1) - BPDUs are to be transmitted A non-zero value indicates that BPDUs are to be sent on the specified port.
.1.3.6.1.4.1.4526.11.1.2.15.9.1.10,NETGEAR-SWITCHING-MIB::agentStpPortHelloTime,Unsigned32,read-write,,current,,Hello time for the STP port. The default value is 2.
.1.3.6.1.4.1.4526.11.1.2.15.10,NETGEAR-SWITCHING-MIB::agentStpCstConfigGroup,,,,,,
.1.3.6.1.4.1.4526.11.1.2.15.10.1,NETGEAR-SWITCHING-MIB::agentStpCstHelloTime,Unsigned32,read-only,,current,,The MSTP root port hello time for the CIST.
.1.3.6.1.4.1.4526.11.1.2.15.10.2,NETGEAR-SWITCHING-MIB::agentStpCstMaxAge,Unsigned32,read-only,,current,,The MSTP root port max age for the CIST.
.1.3.6.1.4.1.4526.11.1.2.15.10.3,NETGEAR-SWITCHING-MIB::agentStpCstRegionalRootId,OCTET,read-only,,current,,The MSTP regional root identifier for the CIST.
.1.3.6.1.4.1.4526.11.1.2.15.10.4,NETGEAR-SWITCHING-MIB::agentStpCstRegionalRootPathCost,Unsigned32,read-only,,current,,The MSTP regional root path cost for the CIST.
.1.3.6.1.4.1.4526.11.1.2.15.10.5,NETGEAR-SWITCHING-MIB::agentStpCstRootFwdDelay,Unsigned32,read-only,,current,,The MSTP root port forward delay for the CIST.
.1.3.6.1.4.1.4526.11.1.2.15.10.6,NETGEAR-SWITCHING-MIB::agentStpCstBridgeFwdDelay,Unsigned32,read-write,,current,,The MSTP bridge forward delay for the CIST. The default value is 15.
.1.3.6.1.4.1.4526.11.1.2.15.10.7,NETGEAR-SWITCHING-MIB::agentStpCstBridgeHelloTime,Unsigned32,read-only,,current,,The MSTP bridge hello time for the CIST. The default  value is 2. According to IEEE 802.1Q-REV 2005 updating hello time is disallowed
.1.3.6.1.4.1.4526.11.1.2.15.10.8,NETGEAR-SWITCHING-MIB::agentStpCstBridgeHoldTime,Unsigned32,read-only,,current,,The MSTP bridge hold time for the CIST.
.1.3.6.1.4.1.4526.11.1.2.15.10.9,NETGEAR-SWITCHING-MIB::agentStpCstBridgeMaxAge,Unsigned32,read-write,,current,,The MSTP bridge max age for the CIST. The default value is 20.
.1.3.6.1.4.1.4526.11.1.2.15.10.10,NETGEAR-SWITCHING-MIB::agentStpCstBridgeMaxHops,Unsigned32,read-write,,current,,The MSTP bridge max hops for the CIST. The default value is 20.
.1.3.6.1.4.1.4526.11.1.2.15.10.11,NETGEAR-SWITCHING-MIB::agentStpCstBridgePriority,Unsigned32,read-write,,current,,The MSTP bridge priority for the CIST. The default value is 32768.
.1.3.6.1.4.1.4526.11.1.2.15.10.12,NETGEAR-SWITCHING-MIB::agentStpCstBridgeHoldCount,Unsigned32,read-write,,current,,The MSTP bridge hold count for the CIST. This command sets the value of maximum bpdus that a bridge is allowed to send within a hello time window. The default value is 6.
.1.3.6.1.4.1.4526.11.1.2.15.11,NETGEAR-SWITCHING-MIB::agentStpCstPortTable,,not-accessible,,current,,CIST port table.
.1.3.6.1.4.1.4526.11.1.2.15.11.1,NETGEAR-SWITCHING-MIB::agentStpCstPortEntry,,not-accessible,ifIndex,current,,CIST port entry.
.1.3.6.1.4.1.4526.11.1.2.15.11.1.1,NETGEAR-SWITCHING-MIB::agentStpCstPortOperEdge,INTEGER,read-only,,current,enable(1):disable(2),The MSTP operational status of a specific port for the CIST.
.1.3.6.1.4.1.4526.11.1.2.15.11.1.2,NETGEAR-SWITCHING-MIB::agentStpCstPortOperPointToPoint,INTEGER,read-only,,current,true(1):false(2),The MSTP operational point to point mac of a specific port for the CIST.
.1.3.6.1.4.1.4526.11.1.2.15.11.1.3,NETGEAR-SWITCHING-MIB::agentStpCstPortTopologyChangeAck,INTEGER,read-only,,current,true(1):false(2),The MSTP topology change acknowledge for a specific port in the CIST.
.1.3.6.1.4.1.4526.11.1.2.15.11.1.4,NETGEAR-SWITCHING-MIB::agentStpCstPortEdge,INTEGER,read-write,,current,enable(1):disable(2),The administrative state of a specific port in CIST. enable(1) - enables the port. disable(2) - disables the port. The default port state is disabled.
.1.3.6.1.4.1.4526.11.1.2.15.11.1.5,NETGEAR-SWITCHING-MIB::agentStpCstPortForwardingState,INTEGER,read-only,,current,discarding(1):learning(2):forwarding(3):disabled(4):manualFwd(5):notParticipate(6),The MSTP forwarding state of a specific port in CIST.
.1.3.6.1.4.1.4526.11.1.2.15.11.1.6,NETGEAR-SWITCHING-MIB::agentStpCstPortId,OCTET,read-only,,current,,The MSTP port identifier of a specific port in CIST.
.1.3.6.1.4.1.4526.11.1.2.15.11.1.7,NETGEAR-SWITCHING-MIB::agentStpCstPortPathCost,Unsigned32,read-write,,current,,The MSTP port path cost in CIST. The default value will correspond to the recommendation specified in IEEE 802.1s Table 13-2 which varies depending upon link speed.
.1.3.6.1.4.1.4526.11.1.2.15.11.1.8,NETGEAR-SWITCHING-MIB::agentStpCstPortPriority,Unsigned32,read-write,,current,,The MSTP port priority in CIST. The priority is in the increments of 16. The default value is 128.
.1.3.6.1.4.1.4526.11.1.2.15.11.1.9,NETGEAR-SWITCHING-MIB::agentStpCstDesignatedBridgeId,OCTET,read-only,,current,,The MSTP designated bridge ID of a specific port in CIST.
.1.3.6.1.4.1.4526.11.1.2.15.11.1.10,NETGEAR-SWITCHING-MIB::agentStpCstDesignatedCost,Unsigned32,read-only,,current,,The MSTP designated cost of a specific port in CIST.
.1.3.6.1.4.1.4526.11.1.2.15.11.1.11,NETGEAR-SWITCHING-MIB::agentStpCstDesignatedPortId,OCTET,read-only,,current,,The MSTP designated port ID of a specific port in CIST.
.1.3.6.1.4.1.4526.11.1.2.15.11.1.12,NETGEAR-SWITCHING-MIB::agentStpCstExtPortPathCost,Unsigned32,read-write,,current,,The MSTP external port path cost in CIST. The default value varies depending upon the link speed.
.1.3.6.1.4.1.4526.11.1.2.15.11.1.13,NETGEAR-SWITCHING-MIB::agentStpCstPortBpduGuardEffect,INTEGER,read-only,,current,enable(1):disable(2),BPDU Guard Mode effect on the port.  enable(1) - BPDU Guard Mode is enabled on the port. disable(2) - BPDU Guard Mode is disabled on the port.
.1.3.6.1.4.1.4526.11.1.2.15.11.1.14,NETGEAR-SWITCHING-MIB::agentStpCstPortBpduFilter,INTEGER,read-write,,current,enable(1):disable(2),This command sets BPDU Filter mode on the port.   enable(1) - BPDU Filter Mode is enabled on the port. disable(2) - BPDU Filter Mode is disabled on the port.
.1.3.6.1.4.1.4526.11.1.2.15.11.1.15,NETGEAR-SWITCHING-MIB::agentStpCstPortBpduFlood,INTEGER,read-write,,current,enable(1):disable(2),This command sets BPDU Flood mode on the port.   enable(1) - BPDU Flood Mode is enabled on the port. disable(2) - BPDU Flood Mode is disabled on the port.
.1.3.6.1.4.1.4526.11.1.2.15.11.1.16,NETGEAR-SWITCHING-MIB::agentStpCstPortAutoEdge,INTEGER,read-write,,current,enable(1):disable(2),This command sets the auto-edge mode of the port which enables it to become an edge port if it does not see BPDUs for some duration. enable(1) - enables the auto-edge mode for the port. disable(2) - disables the auto-edge mode for the port. The default auto-edge mode is disabled.
.1.3.6.1.4.1.4526.11.1.2.15.11.1.17,NETGEAR-SWITCHING-MIB::agentStpCstPortRootGuard,INTEGER,read-write,,current,enable(1):disable(2),This command sets a port to discard any superior information received by the port and thus protect against root of the device from changing.The port gets put into discarding state and does not forward any packets. enable(1) - enables the root-guard mode for the port. disable(2) - disables the root-guard mode for the port. The default root-guard mode is disabled.
.1.3.6.1.4.1.4526.11.1.2.15.11.1.18,NETGEAR-SWITCHING-MIB::agentStpCstPortTCNGuard,INTEGER,read-write,,current,enable(1):disable(2),This command restricts the port from propagating any topology change information received through that port. enable(1) - enables the tcn-guard mode for the port. disable(2) - disables the tcn-guard mode for the port. The default tcn-guard mode is disabled.
.1.3.6.1.4.1.4526.11.1.2.15.12,NETGEAR-SWITCHING-MIB::agentStpMstTable,,not-accessible,,current,,MST table.
.1.3.6.1.4.1.4526.11.1.2.15.12.1,NETGEAR-SWITCHING-MIB::agentStpMstEntry,,not-accessible,agentStpMstId,current,,MST entry.
.1.3.6.1.4.1.4526.11.1.2.15.12.1.1,NETGEAR-SWITCHING-MIB::agentStpMstId,Unsigned32,read-only,,current,,The MSTP instance ID.
.1.3.6.1.4.1.4526.11.1.2.15.12.1.2,NETGEAR-SWITCHING-MIB::agentStpMstBridgePriority,Unsigned32,read-write,,current,,The MSTP bridge priority in a specific instance. The priority is in the increments of 4096. The recommended default value is 32768.
.1.3.6.1.4.1.4526.11.1.2.15.12.1.3,NETGEAR-SWITCHING-MIB::agentStpMstBridgeIdentifier,OCTET,read-only,,current,,The MSTP bridge identifier in a specific instance.
.1.3.6.1.4.1.4526.11.1.2.15.12.1.4,NETGEAR-SWITCHING-MIB::agentStpMstDesignatedRootId,OCTET,read-only,,current,,The MSTP designated root bridge identifier in a specific instance.
.1.3.6.1.4.1.4526.11.1.2.15.12.1.5,NETGEAR-SWITCHING-MIB::agentStpMstRootPathCost,Unsigned32,read-only,,current,,The MSTP root path cost in a specific instance.
.1.3.6.1.4.1.4526.11.1.2.15.12.1.6,NETGEAR-SWITCHING-MIB::agentStpMstRootPortId,OCTET,read-only,,current,,The MSTP root port ID in a specific instance.
.1.3.6.1.4.1.4526.11.1.2.15.12.1.7,NETGEAR-SWITCHING-MIB::agentStpMstTimeSinceTopologyChange,TimeTicks,read-only,,current,,The MSTP time since the last topology change in a specific instance.
.1.3.6.1.4.1.4526.11.1.2.15.12.1.8,NETGEAR-SWITCHING-MIB::agentStpMstTopologyChangeCount,Counter32,read-only,,current,,The MSTP count of topology changes in a specific instance.
.1.3.6.1.4.1.4526.11.1.2.15.12.1.9,NETGEAR-SWITCHING-MIB::agentStpMstTopologyChangeParm,INTEGER,read-only,,current,true(1):false(2),The MSTP topology change parameter in a specific instance.
.1.3.6.1.4.1.4526.11.1.2.15.12.1.10,NETGEAR-SWITCHING-MIB::agentStpMstRowStatus,INTEGER,read-create,,current,active(1):notInService(2):notReady(3):createAndGo(4):createAndWait(5):destroy(6),The MSTP instance status. Supported values: active(1) - valid instance. createAndGo(4) - used to create a new instance. destroy(6) - removes an instance.
.1.3.6.1.4.1.4526.11.1.2.15.13,NETGEAR-SWITCHING-MIB::agentStpMstPortTable,,not-accessible,,current,,MST port table.
.1.3.6.1.4.1.4526.11.1.2.15.13.1,NETGEAR-SWITCHING-MIB::agentStpMstPortEntry,,not-accessible,agentStpMstId:ifIndex,current,,MST port entry.
.1.3.6.1.4.1.4526.11.1.2.15.13.1.1,NETGEAR-SWITCHING-MIB::agentStpMstPortForwardingState,INTEGER,read-only,,current,discarding(1):learning(2):forwarding(3):disabled(4):manualFwd(5):notParticipate(6),The MSTP forwarding state of a specific port in a specific instance.
.1.3.6.1.4.1.4526.11.1.2.15.13.1.2,NETGEAR-SWITCHING-MIB::agentStpMstPortId,OCTET,read-only,,current,,The MSTP port identifier of a specific port in a specific instance.
.1.3.6.1.4.1.4526.11.1.2.15.13.1.3,NETGEAR-SWITCHING-MIB::agentStpMstPortPathCost,Unsigned32,read-write,,current,,The MSTP port path cost in a specific instance. The default value will correspond to the recommendation specified in IEEE 802.1s Table 13-2 which varies depending upon link speed.
.1.3.6.1.4.1.4526.11.1.2.15.13.1.4,NETGEAR-SWITCHING-MIB::agentStpMstPortPriority,Unsigned32,read-write,,current,,The MSTP port priority in a specific instance. The priority is in the increments of 16. The default value is 128.
.1.3.6.1.4.1.4526.11.1.2.15.13.1.5,NETGEAR-SWITCHING-MIB::agentStpMstDesignatedBridgeId,OCTET,read-only,,current,,The MSTP designated bridge ID of a specific port in a specific instance.
.1.3.6.1.4.1.4526.11.1.2.15.13.1.6,NETGEAR-SWITCHING-MIB::agentStpMstDesignatedCost,Unsigned32,read-only,,current,,The MSTP designated cost of a specific port in a specific instance.
.1.3.6.1.4.1.4526.11.1.2.15.13.1.7,NETGEAR-SWITCHING-MIB::agentStpMstDesignatedPortId,OCTET,read-only,,current,,The MSTP designated port ID of a specific port in a specific instance.
.1.3.6.1.4.1.4526.11.1.2.15.14,NETGEAR-SWITCHING-MIB::agentStpMstVlanTable,,not-accessible,,current,,MST VLAN table.
.1.3.6.1.4.1.4526.11.1.2.15.14.1,NETGEAR-SWITCHING-MIB::agentStpMstVlanEntry,,not-accessible,agentStpMstId:dot1qVlanIndex,current,,MST VLAN entry.
.1.3.6.1.4.1.4526.11.1.2.15.14.1.1,NETGEAR-SWITCHING-MIB::agentStpMstVlanRowStatus,INTEGER,read-create,,current,active(1):notInService(2):notReady(3):createAndGo(4):createAndWait(5):destroy(6),The association status of an MSTP instance and a VLAN. Supported values: active(1) - valid association between an MSTP instance and a VLAN. createAndGo(4) - used to create a new association between an MSTP instance and a VLAN. destroy(6) - removes the association between an MSTP instance and a VLAN.
.1.3.6.1.4.1.4526.11.1.2.16,NETGEAR-SWITCHING-MIB::agentAuthenticationGroup,,,,,,
.1.3.6.1.4.1.4526.11.1.2.16.1,NETGEAR-SWITCHING-MIB::agentAuthenticationListCreate,OCTET,read-write,,current,,Authentication List Create If set to a non empty string, creates a new Authentication List for configuration.
.1.3.6.1.4.1.4526.11.1.2.16.2,NETGEAR-SWITCHING-MIB::agentAuthenticationListTable,,not-accessible,,current,,MST VLAN table.
.1.3.6.1.4.1.4526.11.1.2.16.2.1,NETGEAR-SWITCHING-MIB::agentAuthenticationListEntry,,not-accessible,agentAuthenticationListIndex,current,,MST VLAN entry.
.1.3.6.1.4.1.4526.11.1.2.16.2.1.1,NETGEAR-SWITCHING-MIB::agentAuthenticationListIndex,Unsigned32,not-accessible,,current,,Authenticaiton List Index Unique number used for indexing into this table.
.1.3.6.1.4.1.4526.11.1.2.16.2.1.2,NETGEAR-SWITCHING-MIB::agentAuthenticationListName,OCTET,read-only,,current,,Authenticaiton List Name Unique name used to identify the Authentication List from other tables.
.1.3.6.1.4.1.4526.11.1.2.16.2.1.3,NETGEAR-SWITCHING-MIB::agentAuthenticationListMethod1,INTEGER,read-write,,current,local(1):radius(2):reject(3):tacacs(4),Authenticion List Method 1 Configures the first authentication method to use when this list is specified.
.1.3.6.1.4.1.4526.11.1.2.16.2.1.4,NETGEAR-SWITCHING-MIB::agentAuthenticationListMethod2,INTEGER,read-write,,current,undefined(1):local(2):radius(3):reject(4):tacacs(5),Authenticion List Method 2 Configures the second authentication method to use when this list is specified.
.1.3.6.1.4.1.4526.11.1.2.16.2.1.5,NETGEAR-SWITCHING-MIB::agentAuthenticationListMethod3,INTEGER,read-write,,current,undefined(1):local(2):radius(3):reject(4):tacacs(5),Authenticion List Method 3 Configures the third authentication method to use when this list is specified.
.1.3.6.1.4.1.4526.11.1.2.16.2.1.6,NETGEAR-SWITCHING-MIB::agentAuthenticationListStatus,INTEGER,read-write,,current,active(1):notInService(2):notReady(3):createAndGo(4):createAndWait(5):destroy(6),The status of the Authentication List. Supported values: active(1) - indicates a valid Authenticaiton List destroy(6) - removes the Authentication List.
.1.3.6.1.4.1.4526.11.1.2.16.2.1.7,NETGEAR-SWITCHING-MIB::agentAuthenticationListMethod4,INTEGER,read-write,,current,undefined(1):local(2):radius(3):reject(4):tacacs(5),Authenticion List Method 4 Configures the fourth authentication method to use when this list is specified.
.1.3.6.1.4.1.4526.11.1.2.16.3,NETGEAR-SWITCHING-MIB::agentUserConfigDefaultAuthenticationList,OCTET,read-write,,current,,Default Authentication List This object configures which authentication list to use for users which do not have an Authentication List configured. The list must be configured before setting.
.1.3.6.1.4.1.4526.11.1.2.16.4,NETGEAR-SWITCHING-MIB::agentUserAuthenticationConfigTable,,not-accessible,,current,,User Authentication Config Table
.1.3.6.1.4.1.4526.11.1.2.16.4.1,NETGEAR-SWITCHING-MIB::agentUserAuthenticationConfigEntry,,not-accessible,,current,,User Authentication Config Entry
.1.3.6.1.4.1.4526.11.1.2.16.4.1.1,NETGEAR-SWITCHING-MIB::agentUserAuthenticationList,OCTET,read-write,,current,,User Authentication List This object configures which authentication list to use for this user. The list must be configured before setting.
.1.3.6.1.4.1.4526.11.1.2.16.5,NETGEAR-SWITCHING-MIB::agentUserPortConfigTable,,not-accessible,,current,,User Port Config Table
.1.3.6.1.4.1.4526.11.1.2.16.5.1,NETGEAR-SWITCHING-MIB::agentUserPortConfigEntry,,not-accessible,,current,,User Port Config Entry
.1.3.6.1.4.1.4526.11.1.2.16.5.1.1,NETGEAR-SWITCHING-MIB::agentUserPortSecurity,OCTET,read-write,,current,,User Port Port Security This object configures which ports the user has access to. Ports are indexed based on dot1dBasePort entries in dot1dBasePortTable.
.1.3.6.1.4.1.4526.11.1.2.17,NETGEAR-SWITCHING-MIB::agentClassOfServiceGroup,,,,,,
.1.3.6.1.4.1.4526.11.1.2.17.1,NETGEAR-SWITCHING-MIB::agentClassOfServicePortTable,,not-accessible,,current,,A table that contains information about the 802.1p priority mapping to traffic class priority queue for every physical port.
.1.3.6.1.4.1.4526.11.1.2.17.1.1,NETGEAR-SWITCHING-MIB::agentClassOfServicePortEntry,,not-accessible,ifIndex:agentClassOfServicePortPriority,current,,A 802.1p priority mapped to a traffic class priority queue.
.1.3.6.1.4.1.4526.11.1.2.17.1.1.1,NETGEAR-SWITCHING-MIB::agentClassOfServicePortPriority,INTEGER,not-accessible,,current,,The Priority value determined for the received frame. This value is equivalent to the priority indicated in the tagged frame received, or one of the evaluated priorities, determined according to the media-type. For untagged frames received from Ethernet media, this value is equal to the dot1dPortDefaultUserPriority value for the ingress port.
.1.3.6.1.4.1.4526.11.1.2.17.1.1.2,NETGEAR-SWITCHING-MIB::agentClassOfServicePortClass,INTEGER,read-write,,current,,Traffic class priority queue the received frame is mapped to.
.1.3.6.1.4.1.4526.11.1.2.18,NETGEAR-SWITCHING-MIB::agentHTTPConfigGroup,,,,,,
.1.3.6.1.4.1.4526.11.1.2.18.1,NETGEAR-SWITCHING-MIB::agentHTTPWebMode,INTEGER,read-write,,current,enable(1):disable(2),Configures the HTTP server admin mode
.1.3.6.1.4.1.4526.11.1.2.18.2,NETGEAR-SWITCHING-MIB::agentHTTPJavaMode,INTEGER,read-write,,current,enable(1):disable(2),Configures the use of the Java interface through Web connections.
.1.3.6.1.4.1.4526.11.1.2.18.3,NETGEAR-SWITCHING-MIB::agentHTTPMaxSessions,Integer32,read-write,,current,,Configures the maximum number of allowable HTTP sessions. The default value is 16.
.1.3.6.1.4.1.4526.11.1.2.18.4,NETGEAR-SWITCHING-MIB::agentHTTPHardTimeout,Integer32,read-write,,current,,Configures the hard timeout for HTTP sessions in hours. The default value is 24 hours. A value of 0 gives an infinite timeout.
.1.3.6.1.4.1.4526.11.1.2.18.5,NETGEAR-SWITCHING-MIB::agentHTTPSoftTimeout,Integer32,read-write,,current,,Configures the soft (activity) timeout for HTTP sessions in minutes. The default value is 5 minutes. A value of 0 gives an infinite timeout.
.1.3.6.1.4.1.4526.11.1.3,NETGEAR-SWITCHING-MIB::agentSystemGroup,,,,,,
.1.3.6.1.4.1.4526.11.1.3.1,NETGEAR-SWITCHING-MIB::agentSaveConfig,INTEGER,read-write,,current,enable(1):disable(2),enable(1) will initiate an configuration save to nvram. Status is returned by the object agentSaveConfigStatus.
.1.3.6.1.4.1.4526.11.1.3.2,NETGEAR-SWITCHING-MIB::agentClearConfig,INTEGER,read-write,,current,enable(1):disable(2),clear config to factory defaults
.1.3.6.1.4.1.4526.11.1.3.3,NETGEAR-SWITCHING-MIB::agentClearLags,INTEGER,read-write,,current,enable(1):disable(2),clear lag configuration
.1.3.6.1.4.1.4526.11.1.3.4,NETGEAR-SWITCHING-MIB::agentClearLoginSessions,INTEGER,read-write,,current,enable(1):disable(2),close all telnet sessions
.1.3.6.1.4.1.4526.11.1.3.5,NETGEAR-SWITCHING-MIB::agentClearPasswords,INTEGER,read-write,,current,enable(1):disable(2),reset passwords
.1.3.6.1.4.1.4526.11.1.3.6,NETGEAR-SWITCHING-MIB::agentClearPortStats,INTEGER,read-write,,current,enable(1):disable(2),clear all port statistics
.1.3.6.1.4.1.4526.11.1.3.7,NETGEAR-SWITCHING-MIB::agentClearSwitchStats,INTEGER,read-write,,current,enable(1):disable(2),clear all switch statistics
.1.3.6.1.4.1.4526.11.1.3.8,NETGEAR-SWITCHING-MIB::agentClearTrapLog,INTEGER,read-write,,current,enable(1):disable(2),clear trap log
.1.3.6.1.4.1.4526.11.1.3.9,NETGEAR-SWITCHING-MIB::agentClearVlan,INTEGER,read-write,,current,enable(1):disable(2),clear vlan entries
.1.3.6.1.4.1.4526.11.1.3.10,NETGEAR-SWITCHING-MIB::agentResetSystem,INTEGER,read-write,,current,enable(1):disable(2),Resets the switch. This object is not valid for stacking platforms.
.1.3.6.1.4.1.4526.11.1.3.11,NETGEAR-SWITCHING-MIB::agentSaveConfigStatus,INTEGER,read-only,,current,notInitiated(1):savingInProcess(2):savingComplete(3):savingFailed(4),Indicates the current status of an save configuration request.
.1.3.6.1.4.1.4526.11.1.4,NETGEAR-SWITCHING-MIB::agentCableTesterGroup,,,,,,
.1.3.6.1.4.1.4526.11.1.4.1,NETGEAR-SWITCHING-MIB::agentCableTesterStatus,INTEGER,read-write,,current,active(1):success(2):failure(3):uninitialized(4),Status of the Virtual Cable Tester active(1) - cable testing is in progress. Set to this value to start the test. success(2) - A successful test was performed. Cannot be set. failure(3) - A failure was encountered during the test. Cannot be set. uninitialized(4) - No test has been performed yet. Cannot be set.
.1.3.6.1.4.1.4526.11.1.4.2,NETGEAR-SWITCHING-MIB::agentCableTesterIfIndex,Unsigned32,read-write,,current,,Determines on which port to perform the cable test. Limited to copper based ports.
.1.3.6.1.4.1.4526.11.1.4.3,NETGEAR-SWITCHING-MIB::agentCableTesterCableStatus,INTEGER,read-only,,current,normal(1):open(2):short(3):unknown(4),Indicates the results of the Cable Test. normal(1) - The cable is working correctly. open(2) - The cable is disconnected or there is a faulty connector. short(3) - There is an electrical short in the cable. unknown(4) - No test has been performed yet, or a test is currently in progress.
.1.3.6.1.4.1.4526.11.1.4.4,NETGEAR-SWITCHING-MIB::agentCableTesterMinimumCableLength,Unsigned32,read-only,,current,,The estimated length of the cable in meters. This value indicates the shortest length estimated. This object will return 0 if agentCableTesterStatus is not success(2) or the cable length is unknown.
.1.3.6.1.4.1.4526.11.1.4.5,NETGEAR-SWITCHING-MIB::agentCableTesterMaximumCableLength,Unsigned32,read-only,,current,,The estimated length of the cable in meters. This value indicates the longest length estimated. This object will return 0 if agentCableTesterStatus is not success(2) or the cable length is unknown.
.1.3.6.1.4.1.4526.11.1.4.6,NETGEAR-SWITCHING-MIB::agentCableTesterCableFailureLocation,Unsigned32,read-only,,current,,The estimated distance in meters from the end of the cable to the failure location. This object will return 0 if agentCableTesterStatus is not success(2).
.1.3.6.1.4.1.4526.11.3,NETGEAR-QOS-MIB::agentQOS,,,,,,The MIB definitaions for Quality of Service Flex package.
.1.3.6.1.4.1.4526.11.3.2,NETGEAR-QOS-ACL-MIB::agentQOSACL,,,,,,The MIB definitions for Quality of Service - ACL Flex package.
.1.3.6.1.4.1.4526.11.3.2.0,NETGEAR-QOS-ACL-MIB::aclNotifications,,,,,,
.1.3.6.1.4.1.4526.11.3.2.0.1,NETGEAR-QOS-ACL-MIB::aclTrapRuleLogEvent,,,,,,This trap is generated on a periodic basis to indicate that an  take action on one or more packets. The aclTrapRuleHitCount denotes 
.1.3.6.1.4.1.4526.11.3.2.1,NETGEAR-QOS-ACL-MIB::aclTable,,not-accessible,,current,,A table of ACL instances.
.1.3.6.1.4.1.4526.11.3.2.1.1,NETGEAR-QOS-ACL-MIB::aclEntry,,not-accessible,aclIndex,current,,
.1.3.6.1.4.1.4526.11.3.2.1.1.1,NETGEAR-QOS-ACL-MIB::aclIndex,Integer32,not-accessible,,current,,The IP ACL table index this instance is associated with.
.1.3.6.1.4.1.4526.11.3.2.1.1.3,NETGEAR-QOS-ACL-MIB::aclStatus,INTEGER,read-create,,current,active(1):notInService(2):notReady(3):createAndGo(4):createAndWait(5):destroy(6),Status of this instance. Entries can not be deleted until all rows in  the aclIfTable and aclRuleTable with corresponding values of aclIndex  have been deleted.  active(1) - this ACL instance is active createAndGo(4) - set to this value to create an instance destroy(6) - set to this value to delete an instance
.1.3.6.1.4.1.4526.11.3.2.4,NETGEAR-QOS-ACL-MIB::aclRuleTable,,not-accessible,,current,,A table of IP ACL Rule instances.
.1.3.6.1.4.1.4526.11.3.2.4.1,NETGEAR-QOS-ACL-MIB::aclRuleEntry,,not-accessible,aclIndex:aclRuleIndex,current,,A table of IP ACL Classification Rules
.1.3.6.1.4.1.4526.11.3.2.4.1.1,NETGEAR-QOS-ACL-MIB::aclRuleIndex,Integer32,not-accessible,,current,,The index of this rule instance within an IP ACL.
.1.3.6.1.4.1.4526.11.3.2.4.1.2,NETGEAR-QOS-ACL-MIB::aclRuleAction,INTEGER,read-create,,current,permit(1):deny(2),The type of action this rule should perform.
.1.3.6.1.4.1.4526.11.3.2.4.1.3,NETGEAR-QOS-ACL-MIB::aclRuleProtocol,Integer32,read-create,,current,,icmp - 1 igmp - 2 ip - 4 tcp - 6 udp - 17 All values from 1 to 255 are valid.
.1.3.6.1.4.1.4526.11.3.2.4.1.4,NETGEAR-QOS-ACL-MIB::aclRuleSrcIpAddress,IpAddress,read-create,,current,,The Source IP Address used in the ACL Classification.
.1.3.6.1.4.1.4526.11.3.2.4.1.5,NETGEAR-QOS-ACL-MIB::aclRuleSrcIpMask,IpAddress,read-create,,current,,The Source IP Mask used in the ACL Classification. This mask is expressed using wild-card notation,which is the 1's compliment of traditional Subnet Masks. Here, the 'Don't care bits' are represented by binary 1's and  'Do care bits' are represented by binary 0's. 
.1.3.6.1.4.1.4526.11.3.2.4.1.6,NETGEAR-QOS-ACL-MIB::aclRuleSrcL4Port,Integer32,read-create,,current,,The Source Port Number (Layer 4) used in the ACL Classification.
.1.3.6.1.4.1.4526.11.3.2.4.1.7,NETGEAR-QOS-ACL-MIB::aclRuleSrcL4PortRangeStart,Integer32,read-create,,current,,The Source Port Number(Layer 4) range start.
.1.3.6.1.4.1.4526.11.3.2.4.1.8,NETGEAR-QOS-ACL-MIB::aclRuleSrcL4PortRangeEnd,Integer32,read-create,,current,,The Source Port Number(Layer 4) range end.
.1.3.6.1.4.1.4526.11.3.2.4.1.9,NETGEAR-QOS-ACL-MIB::aclRuleDestIpAddress,IpAddress,read-create,,current,,The Destination IP Address used in the ACL Classification.
.1.3.6.1.4.1.4526.11.3.2.4.1.10,NETGEAR-QOS-ACL-MIB::aclRuleDestIpMask,IpAddress,read-create,,current,,The Destination IP Mask used in the ACL Classification. This mask is expressed using wild-card notation,which is the 1's compliment of traditional Subnet Masks. Here, the 'Don't care bits' are represented by binary 1's and  'Do care bits' are represented by binary 0's. 
.1.3.6.1.4.1.4526.11.3.2.4.1.11,NETGEAR-QOS-ACL-MIB::aclRuleDestL4Port,Integer32,read-create,,current,,The Destination Port (Layer 4) used in ACl classification.
.1.3.6.1.4.1.4526.11.3.2.4.1.12,NETGEAR-QOS-ACL-MIB::aclRuleDestL4PortRangeStart,Integer32,read-create,,current,,The Destination Port (Layer 4) starting range used in ACL classification.
.1.3.6.1.4.1.4526.11.3.2.4.1.13,NETGEAR-QOS-ACL-MIB::aclRuleDestL4PortRangeEnd,Integer32,read-create,,current,,The Destination Port (Layer 4) ending range used in ACL classification.
.1.3.6.1.4.1.4526.11.3.2.4.1.14,NETGEAR-QOS-ACL-MIB::aclRuleIPDSCP,Integer32,read-create,,current,,The Differentiated Services Code Point value.
.1.3.6.1.4.1.4526.11.3.2.4.1.15,NETGEAR-QOS-ACL-MIB::aclRuleIpPrecedence,Integer32,read-create,,current,,The Type of Service (TOS) IP Precedence value.
.1.3.6.1.4.1.4526.11.3.2.4.1.16,NETGEAR-QOS-ACL-MIB::aclRuleIpTosBits,Integer32,read-create,,current,,The Type of Service (TOS) Bits value.
.1.3.6.1.4.1.4526.11.3.2.4.1.17,NETGEAR-QOS-ACL-MIB::aclRuleIpTosMask,Integer32,read-create,,current,,The Type of Service (TOS) Mask value.
.1.3.6.1.4.1.4526.11.3.2.4.1.18,NETGEAR-QOS-ACL-MIB::aclRuleStatus,INTEGER,read-create,,current,active(1):notInService(2):notReady(3):createAndGo(4):createAndWait(5):destroy(6),Status of this instance.  active(1) - this ACL Rule is active createAndGo(4) - set to this value to create an instance destroy(6) - set to this value to delete an instance
.1.3.6.1.4.1.4526.11.3.2.4.1.19,NETGEAR-QOS-ACL-MIB::aclRuleAssignQueueId,Unsigned32,read-create,,current,,Queue identifier to which all inbound packets matching this  ACL rule are directed. This object defaults to the standard queue assignment for user priority 0 traffic per the IEEE 802.1D specification based on the number of assignable queues in the  system: 1-3 queues: 0 4-7 queues: 1 8 queues: 2 This default assignment is static and is not influenced by other system configuration changes.
.1.3.6.1.4.1.4526.11.3.2.4.1.20,NETGEAR-QOS-ACL-MIB::aclRuleRedirectIntf,Integer32,read-create,,current,,A non-zero value indicates the external ifIndex to which all  inbound packets matching this ACL rule are directed. A  value of zero means packet redirection is not in effect, which is the default value of this object. Note that packet
.1.3.6.1.4.1.4526.11.3.2.4.1.21,NETGEAR-QOS-ACL-MIB::aclRuleMatchEvery,INTEGER,read-create,,current,true(1):false(2),Flag to indicate that the ACL rule is defined to match on every IP packet,  regardless of content.
.1.3.6.1.4.1.4526.11.3.2.4.1.22,NETGEAR-QOS-ACL-MIB::aclRuleMirrorIntf,Integer32,read-create,,current,,A non-zero value indicates the external ifIndex to which all  inbound packets matching this ACL rule are copied. A  value of zero means packet mirroring is not in effect, which is the default value of this object. Note that packet
.1.3.6.1.4.1.4526.11.3.2.4.1.23,NETGEAR-QOS-ACL-MIB::aclRuleLogging,INTEGER,read-create,,current,true(1):false(2),Flag to indicate that the ACL rule is being logged.  A hardware count of the number of times this rule is This object may be supported for an aclRuleAction 
.1.3.6.1.4.1.4526.11.3.2.5,NETGEAR-QOS-ACL-MIB::aclMacIndexNextFree,Integer32,read-only,,current,,This object contains an unused value for the aclMacIndex to be used when creating a new MAC ACL. A value of zero zero indicates the ACL table is full.
.1.3.6.1.4.1.4526.11.3.2.6,NETGEAR-QOS-ACL-MIB::aclMacTable,,not-accessible,,current,,A table of MAC ACL instances.
.1.3.6.1.4.1.4526.11.3.2.6.1,NETGEAR-QOS-ACL-MIB::aclMacEntry,,not-accessible,aclMacIndex,current,,
.1.3.6.1.4.1.4526.11.3.2.6.1.1,NETGEAR-QOS-ACL-MIB::aclMacIndex,Integer32,not-accessible,,current,,The MAC ACL table index this instance is associated with. When creating a new MAC ACL, refer to the aclMacIndexNextFree object to determine the next available aclMacIndex to use.
.1.3.6.1.4.1.4526.11.3.2.6.1.2,NETGEAR-QOS-ACL-MIB::aclMacName,OCTET,read-create,,current,,The name of this MAC ACL entry, which must consist of 1 to 31 alphanumeric characters and uniquely identify this MAC ACL. An existing MAC ACL can be renamed by setting this object to a new name. This object must be set to complete a new MAC ACL  row instance.
.1.3.6.1.4.1.4526.11.3.2.6.1.3,NETGEAR-QOS-ACL-MIB::aclMacStatus,INTEGER,read-create,,current,active(1):notInService(2):notReady(3):createAndGo(4):createAndWait(5):destroy(6),Status of this instance. ACL MAC entries can not be deleted until all rows in  the aclIfTable and aclRuleTable with corresponding values of aclMacIndex  have been deleted.  active(1) - this ACL instance is active createAndGo(4) - set to this value to create an instance destroy(6) - set to this value to delete an instance The aclMacName object must be set to complete this row instance.
.1.3.6.1.4.1.4526.11.3.2.7,NETGEAR-QOS-ACL-MIB::aclMacRuleTable,,not-accessible,,current,,A table of layer 2 MAC ACL Rule instances.
.1.3.6.1.4.1.4526.11.3.2.7.1,NETGEAR-QOS-ACL-MIB::aclMacRuleEntry,,not-accessible,aclMacIndex:aclMacRuleIndex,current,,A table of layer 2 MAC ACL Classification Rules
.1.3.6.1.4.1.4526.11.3.2.7.1.1,NETGEAR-QOS-ACL-MIB::aclMacRuleIndex,Integer32,not-accessible,,current,,The index of this rule instance within an MAC ACL.
.1.3.6.1.4.1.4526.11.3.2.7.1.2,NETGEAR-QOS-ACL-MIB::aclMacRuleAction,INTEGER,read-create,,current,permit(1):deny(2),The type of action this MAC ACL rule should perform.
.1.3.6.1.4.1.4526.11.3.2.7.1.3,NETGEAR-QOS-ACL-MIB::aclMacRuleCos,Unsigned32,read-create,,current,,The Class of Service (COS) used in the MAC ACL Classification. This is the three-bit user priority field in the 802.1Q tag  header of a tagged Ethernet frame. For frames containing a  double VLAN tag, this field is located in the first/outer tag.
.1.3.6.1.4.1.4526.11.3.2.7.1.4,NETGEAR-QOS-ACL-MIB::aclMacRuleCos2,Unsigned32,read-create,,current,,The Secondary Class of Service (COS2) used in the MAC ACL Classification. This is the three-bit user priority field in the second/inner 802.1Q  tag header of a double VLAN tagged Ethernet frame.
.1.3.6.1.4.1.4526.11.3.2.7.1.5,NETGEAR-QOS-ACL-MIB::aclMacRuleDestMacAddr,OCTET,read-create,,current,,The Destination MAC address used in the MAC ACL Classification.
.1.3.6.1.4.1.4526.11.3.2.7.1.6,NETGEAR-QOS-ACL-MIB::aclMacRuleDestMacMask,OCTET,read-create,,current,,The Destination MAC address mask used in the MAC ACL Classification.  This mask value identifies the portion of the aclMacRuleDestMacAddr that is compared against a packet. A non-contiguous mask value is  permitted.
.1.3.6.1.4.1.4526.11.3.2.7.1.7,NETGEAR-QOS-ACL-MIB::aclMacRuleEtypeKey,INTEGER,read-create,,current,custom(1):appletalk(2):arp(3):ibmsna(4):ipv4(5):ipv6(6):ipx(7):mplsmcast(8):mplsucast(9):netbios(10):novell(11):pppoe(12):rarp(13),The Ethertype keyword used in the MAC ACL Classification. A keyword of custom(1) requires that the aclMacRuleEtypeValue object also be set.
.1.3.6.1.4.1.4526.11.3.2.7.1.8,NETGEAR-QOS-ACL-MIB::aclMacRuleEtypeValue,Unsigned32,read-create,,current,,The Ethertype custom value used in the MAC ACL Classification. This object is only valid if the aclMacRuleEtypeKey is set to  custom(1). The allowed value for this object is 0x0600 to 0xFFFF
.1.3.6.1.4.1.4526.11.3.2.7.1.9,NETGEAR-QOS-ACL-MIB::aclMacRuleSrcMacAddr,OCTET,read-create,,current,,The Source MAC address used in the MAC ACL Classification.
.1.3.6.1.4.1.4526.11.3.2.7.1.10,NETGEAR-QOS-ACL-MIB::aclMacRuleSrcMacMask,OCTET,read-create,,current,,The Source MAC address mask used in the MAC ACL Classification.  This mask value identifies the portion of the aclMacRuleSrcMacAddr that is compared against a packet. A non-contiguous mask value is  permitted.
.1.3.6.1.4.1.4526.11.3.2.7.1.11,NETGEAR-QOS-ACL-MIB::aclMacRuleVlanId,Unsigned32,read-create,,current,,The VLAN ID value used in the MAC ACL Classification. The VLAN ID field is defined as the 12-bit VLAN identifier in the 802.1Q tag header of a tagged Ethernet frame. This is  contained in the first/outer tag of a double VLAN tagged frame.
.1.3.6.1.4.1.4526.11.3.2.7.1.12,NETGEAR-QOS-ACL-MIB::aclMacRuleVlanIdRangeStart,Unsigned32,read-create,,current,,The VLAN ID range start value used in the MAC ACL Classification. The VLAN ID field is defined as the 12-bit VLAN identifier in the 802.1Q tag header of a tagged Ethernet frame. This is  contained in the first/outer tag of a double VLAN tagged frame.
.1.3.6.1.4.1.4526.11.3.2.7.1.13,NETGEAR-QOS-ACL-MIB::aclMacRuleVlanIdRangeEnd,Unsigned32,read-create,,current,,The VLAN ID range end value used in the MAC ACL Classification. The VLAN ID field is defined as the 12-bit VLAN identifier in the 802.1Q tag header of a tagged Ethernet frame. This is  contained in the first/outer tag of a double VLAN tagged frame.
.1.3.6.1.4.1.4526.11.3.2.7.1.14,NETGEAR-QOS-ACL-MIB::aclMacRuleVlanId2,Unsigned32,read-create,,current,,The Secondary VLAN ID value used in the MAC ACL Classification. The Secondary VLAN ID field is defined as the 12-bit VLAN identifier in the second/inner 802.1Q tag header of a double VLAN tagged Ethernet  frame.
.1.3.6.1.4.1.4526.11.3.2.7.1.15,NETGEAR-QOS-ACL-MIB::aclMacRuleVlanId2RangeStart,Unsigned32,read-create,,current,,The Secondary VLAN ID range start value used in the MAC ACL Classification. The Secondary VLAN ID field is defined as the 12-bit VLAN identifier in the second/inner 802.1Q tag header of a double VLAN tagged Ethernet  frame.
.1.3.6.1.4.1.4526.11.3.2.7.1.16,NETGEAR-QOS-ACL-MIB::aclMacRuleVlanId2RangeEnd,Unsigned32,read-create,,current,,The Secondary VLAN ID range end value used in the MAC ACL Classification. The Secondary VLAN ID field is defined as the 12-bit VLAN identifier in the second/inner 802.1Q tag header of a double VLAN tagged Ethernet  frame.
.1.3.6.1.4.1.4526.11.3.2.7.1.17,NETGEAR-QOS-ACL-MIB::aclMacRuleStatus,INTEGER,read-create,,current,active(1):notInService(2):notReady(3):createAndGo(4):createAndWait(5):destroy(6),Status of this instance.  active(1) - this ACL Rule is active createAndGo(4) - set to this value to create an instance destroy(6) - set to this value to delete an instance
.1.3.6.1.4.1.4526.11.3.2.7.1.18,NETGEAR-QOS-ACL-MIB::aclMacRuleAssignQueueId,Unsigned32,read-create,,current,,Queue identifier to which all inbound packets matching this  MAC ACL rule are directed. This object defaults to the standard queue assignment for user priority 0 traffic per the IEEE 802.1D specification based on the number of assignable queues in the  system: 1-3 queues: 0 4-7 queues: 1 8 queues: 2 This default assignment is static and is not influenced by other system configuration changes.
.1.3.6.1.4.1.4526.11.3.2.7.1.19,NETGEAR-QOS-ACL-MIB::aclMacRuleRedirectIntf,Integer32,read-create,,current,,A non-zero value indicates the external ifIndex to which all  inbound packets matching this MAC ACL rule are directed. A value of zero means packet redirection is not in effect, which is the default value of this object. Note that packet
.1.3.6.1.4.1.4526.11.3.2.7.1.20,NETGEAR-QOS-ACL-MIB::aclMacRuleMatchEvery,INTEGER,read-create,,current,true(1):false(2),Flag to indicate that the MAC ACL rule is defined to match all packets,  regardless of Ethertype.
.1.3.6.1.4.1.4526.11.3.2.7.1.21,NETGEAR-QOS-ACL-MIB::aclMacRuleMirrorIntf,Integer32,read-create,,current,,A non-zero value indicates the external ifIndex to which all  inbound packets matching this MAC ACL rule are copied. A value of zero means packet mirroring is not in effect, which is the default value of this object. Note that packet
.1.3.6.1.4.1.4526.11.3.2.7.1.22,NETGEAR-QOS-ACL-MIB::aclMacRuleLogging,INTEGER,read-create,,current,true(1):false(2),Flag to indicate that the ACL rule is being logged.  A hardware count of the number of times this rule is This object may be supported for an aclMacRuleAction 
.1.3.6.1.4.1.4526.11.3.2.8,NETGEAR-QOS-ACL-MIB::aclIfTable,,not-accessible,,current,,A table of ACL interface instances per direction.
.1.3.6.1.4.1.4526.11.3.2.8.1,NETGEAR-QOS-ACL-MIB::aclIfEntry,,not-accessible,aclIfIndex:aclIfDirection:aclIfSequence:aclIfAclType:aclIfAclId,current,,
.1.3.6.1.4.1.4526.11.3.2.8.1.1,NETGEAR-QOS-ACL-MIB::aclIfIndex,Integer32,not-accessible,,current,,The interface to which this ACL instance applies.
.1.3.6.1.4.1.4526.11.3.2.8.1.2,NETGEAR-QOS-ACL-MIB::aclIfDirection,INTEGER,not-accessible,,current,inbound(1):outbound(2),The interface direction to which this ACL instance applies.
.1.3.6.1.4.1.4526.11.3.2.8.1.3,NETGEAR-QOS-ACL-MIB::aclIfSequence,Unsigned32,not-accessible,,current,,The relative evaluation sequence of this ACL for this interface and direction. When multiple ACLs are allowed  for a given interface and direction, the sequence number  determines the order in which the list of ACLs are evaluated, with lower sequence numbers given higher precedence. The sequence number value is arbitrary, but must be a unique non-zero value for a given interface and direction.  Setting this object to an existing sequence number  value for a given interface and direction causes the  ACL corresponding to that value to be replaced with this ACL.
.1.3.6.1.4.1.4526.11.3.2.8.1.4,NETGEAR-QOS-ACL-MIB::aclIfAclType,INTEGER,not-accessible,,current,ip(1):mac(2):ipv6(3),The type of this ACL, which is used to interpret the  aclIfId object value. Each type of ACL uses its own numbering scheme for identification (see aclIfAclId object for details). The aclIfAclId object must be specified along with this  object.
.1.3.6.1.4.1.4526.11.3.2.8.1.5,NETGEAR-QOS-ACL-MIB::aclIfAclId,Integer32,not-accessible,,current,,The ACL identifier value, which is interpreted based on the aclIfType object. For the IP ACLs, the actual ACL number is its identifier as follows: IP standard ranges from 1-99, while  IP extended ranges from 100-199. Here, aclIfAclId represents  aclIndex.  The MAC ACLs use an internally-generated index value that is assigned when the ACL is created.Here, aclIfAclId  represents aclMacIndex. The IPv6 ACLs use an internally-generated index value that is assigned when the ACL is created.Here, aclVlanAclId  represents aclIpv6Index.  The aclIfType object must be specified along with this object.
.1.3.6.1.4.1.4526.11.3.2.8.1.6,NETGEAR-QOS-ACL-MIB::aclIfStatus,INTEGER,read-create,,current,active(1):notInService(2):notReady(3):createAndGo(4):createAndWait(5):destroy(6),Status of this instance.  active(1) - this ACL interface instance is active createAndGo(4) - set to this value to assign an ACL to an interface and direction destroy(6) - set to this value to remove an ACL from an interface and direction
.1.3.6.1.4.1.4526.11.3.2.9,NETGEAR-QOS-ACL-MIB::aclLoggingGroup,,,,,,
.1.3.6.1.4.1.4526.11.3.2.9.2,NETGEAR-QOS-ACL-MIB::aclTrapRuleIndex,Integer32,accessible-for-notify,,current,,The index of an ACL rule instance.
.1.3.6.1.4.1.4526.11.3.2.9.3,NETGEAR-QOS-ACL-MIB::aclTrapRuleAction,INTEGER,accessible-for-notify,,current,permit(1):deny(2),The type of action this rule should perform, either 
.1.3.6.1.4.1.4526.11.3.2.9.4,NETGEAR-QOS-ACL-MIB::aclTrapRuleHitCount,Counter64,accessible-for-notify,,current,,Number of times the ACL rule was hit during the most
.1.3.6.1.4.1.4526.11.3.2.9.5,NETGEAR-QOS-ACL-MIB::aclTrapFlag,INTEGER,read-write,,current,enable(1):disable(2),ACL Trap Flag - Enables or disables ACL trap generation. When this value is set to enable(1), ACL traps are  sent from the switch when they occur.
.1.3.6.1.4.1.4526.11.3.2.10,NETGEAR-QOS-ACL-MIB::aclIpv6IndexNextFree,Integer32,read-only,,current,,This object contains an unused value for the aclIPv6Index to be used when creating a new IPv6 ACL. A value of zero zero indicates the ACL table is full.
.1.3.6.1.4.1.4526.11.3.2.11,NETGEAR-QOS-ACL-MIB::aclIpv6Table,,not-accessible,,current,,A table of Ipv6 ACL instances.
.1.3.6.1.4.1.4526.11.3.2.11.1,NETGEAR-QOS-ACL-MIB::aclIpv6Entry,,not-accessible,aclIpv6Index,current,,
.1.3.6.1.4.1.4526.11.3.2.11.1.1,NETGEAR-QOS-ACL-MIB::aclIpv6Index,Integer32,not-accessible,,current,,The IPv6 ACL table index this instance is associated with. When creating a new IPv6 ACL, refer to the aclIPv6IndexNextFree object to determine the next available aclIpv6Index to use.
.1.3.6.1.4.1.4526.11.3.2.11.1.2,NETGEAR-QOS-ACL-MIB::aclIpv6Name,OCTET,read-create,,current,,The name of this IPv6 ACL entry, which must consist of 1 to 31 alphanumeric characters and uniquely identify this IPv6 ACL. An existing IPv6 ACL can be renamed by setting this object to a new name. This object must be set to complete a new IPv6 ACL  row instance.
.1.3.6.1.4.1.4526.11.3.2.11.1.3,NETGEAR-QOS-ACL-MIB::aclIpv6Status,INTEGER,read-create,,current,active(1):notInService(2):notReady(3):createAndGo(4):createAndWait(5):destroy(6),Status of this instance.  active(1) - this ACL instance is active createAndGo(4) - set to this value to create an instance destroy(6) - set to this value to delete an instance The aclMacName object must be set to complete this row instance.
.1.3.6.1.4.1.4526.11.3.2.12,NETGEAR-QOS-ACL-MIB::aclIpv6RuleTable,,not-accessible,,current,,A table of IPv6 ACL Rule instances.
.1.3.6.1.4.1.4526.11.3.2.12.1,NETGEAR-QOS-ACL-MIB::aclIpv6RuleEntry,,not-accessible,aclIpv6Index:aclIpv6RuleIndex,current,,A table of IPv6 ACL Classification Rules
.1.3.6.1.4.1.4526.11.3.2.12.1.1,NETGEAR-QOS-ACL-MIB::aclIpv6RuleIndex,Integer32,not-accessible,,current,,The index of this rule instance within an IPv6 ACL.
.1.3.6.1.4.1.4526.11.3.2.12.1.2,NETGEAR-QOS-ACL-MIB::aclIpv6RuleAction,INTEGER,read-create,,current,permit(1):deny(2),The type of action this IPv6 ACL rule should perform.
.1.3.6.1.4.1.4526.11.3.2.12.1.3,NETGEAR-QOS-ACL-MIB::aclIpv6RuleLogging,INTEGER,read-create,,current,true(1):false(2),Flag to indicate that the ACL rule is being logged.  A hardware count of the number of times this rule is This object may be supported for an aclIPv6RuleAction 
.1.3.6.1.4.1.4526.11.3.2.12.1.4,NETGEAR-QOS-ACL-MIB::aclIpv6RuleAssignQueueId,Unsigned32,read-create,,current,,Queue identifier to which all inbound packets matching this  ACL rule are directed. This object defaults to the standard queue assignment for user priority 0 traffic per the IEEE 802.1D specification based on the number of assignable queues in the  system: 1-3 queues: 0 4-7 queues: 1 8 queues: 2 This default assignment is static and is not influenced by other system configuration changes.
.1.3.6.1.4.1.4526.11.3.2.12.1.5,NETGEAR-QOS-ACL-MIB::aclIpv6RuleRedirectIntf,Integer32,read-create,,current,,A non-zero value indicates the external ifIndex to which all  inbound packets matching this Ipv6 ACL rule are directed. A  value of zero means packet redirection is not in effect, which is the default value of this object. Note that packet
.1.3.6.1.4.1.4526.11.3.2.12.1.6,NETGEAR-QOS-ACL-MIB::aclIpv6RuleMirrorIntf,Integer32,read-create,,current,,A non-zero value indicates the external ifIndex to which all  inbound packets matching this IPv6 ACL rule are copied. A  value of zero means packet mirroring is not in effect, which is the default value of this object. Note that packet
.1.3.6.1.4.1.4526.11.3.2.12.1.7,NETGEAR-QOS-ACL-MIB::aclIpv6RuleMatchEvery,INTEGER,read-create,,current,true(1):false(2),Flag to indicate that the ACL rule is defined to match on every IP packet,  regardless of content.
.1.3.6.1.4.1.4526.11.3.2.12.1.8,NETGEAR-QOS-ACL-MIB::aclIpv6RuleProtocol,Integer32,read-create,,current,,icmp - 1 igmp - 2 ip - 4 tcp - 6 udp - 17 All values from 1 to 255 are valid.
.1.3.6.1.4.1.4526.11.3.2.12.1.9,NETGEAR-QOS-ACL-MIB::aclIpv6RuleSrcL4Port,Integer32,read-create,,current,,The Source Port Number (Layer 4) used in the ACL Classification.
.1.3.6.1.4.1.4526.11.3.2.12.1.10,NETGEAR-QOS-ACL-MIB::aclIpv6RuleSrcL4PortRangeStart,Integer32,read-create,,current,,The Source Port Number(Layer 4) range start.
.1.3.6.1.4.1.4526.11.3.2.12.1.11,NETGEAR-QOS-ACL-MIB::aclIpv6RuleSrcL4PortRangeEnd,Integer32,read-create,,current,,The Source Port Number(Layer 4) range end.
.1.3.6.1.4.1.4526.11.3.2.12.1.12,NETGEAR-QOS-ACL-MIB::aclIpv6RuleDestL4Port,Integer32,read-create,,current,,The Destination Port (Layer 4) used in ACl classification.
.1.3.6.1.4.1.4526.11.3.2.12.1.13,NETGEAR-QOS-ACL-MIB::aclIpv6RuleDestL4PortRangeStart,Integer32,read-create,,current,,The Destination Port (Layer 4) starting range used in ACL classification.
.1.3.6.1.4.1.4526.11.3.2.12.1.14,NETGEAR-QOS-ACL-MIB::aclIpv6RuleDestL4PortRangeEnd,Integer32,read-create,,current,,The Destination Port (Layer 4) ending range used in ACL classification.
.1.3.6.1.4.1.4526.11.3.2.12.1.15,NETGEAR-QOS-ACL-MIB::aclIpv6RuleStatus,INTEGER,read-create,,current,active(1):notInService(2):notReady(3):createAndGo(4):createAndWait(5):destroy(6),Status of this instance. active(1) - this ACL Rule is active createAndGo(4) - set to this value to create an instance destroy(6) - set to this value to delete an instance
.1.3.6.1.4.1.4526.11.3.2.12.1.16,NETGEAR-QOS-ACL-MIB::aclIpv6RuleFlowLabel,Integer32,read-create,,current,,Flow label is 20-bit number that is unique to an IPv6 packet, used by end  stations to signify quality-of-service handling in routers.
.1.3.6.1.4.1.4526.11.3.2.12.1.17,NETGEAR-QOS-ACL-MIB::aclIpv6RuleIPDSCP,Integer32,read-create,,current,,The Differentiated Services Code Point value.
.1.3.6.1.4.1.4526.11.3.2.12.1.18,NETGEAR-QOS-ACL-MIB::aclRuleSrcIpv6Prefix,OCTET,read-write,,current,,The Ipv6 Prefix Address configured on the Service Port.
.1.3.6.1.4.1.4526.11.3.2.12.1.19,NETGEAR-QOS-ACL-MIB::aclRuleSrcIpv6PrefixLength,Integer32,read-create,,current,,The Prefix Length.
.1.3.6.1.4.1.4526.11.3.2.12.1.20,NETGEAR-QOS-ACL-MIB::aclRuleDstIpv6Prefix,OCTET,read-write,,current,,The Ipv6 Prefix Address configured on the Service Port.
.1.3.6.1.4.1.4526.11.3.2.12.1.21,NETGEAR-QOS-ACL-MIB::aclRuleDstIpv6PrefixLength,Integer32,read-create,,current,,The Prefix Length.
.1.3.6.1.4.1.4526.11.3.2.13,NETGEAR-QOS-ACL-MIB::aclVlanTable,,not-accessible,,current,,A table of ACL VLAN instances per direction.
.1.3.6.1.4.1.4526.11.3.2.13.1,NETGEAR-QOS-ACL-MIB::aclVlanEntry,,not-accessible,aclVlanIndex:aclVlanDirection:aclVlanSequence:aclVlanAclType:aclVlanAclId,current,,
.1.3.6.1.4.1.4526.11.3.2.13.1.1,NETGEAR-QOS-ACL-MIB::aclVlanIndex,Integer32,not-accessible,,current,,The Vlan to which this ACL instance applies.
.1.3.6.1.4.1.4526.11.3.2.13.1.2,NETGEAR-QOS-ACL-MIB::aclVlanDirection,INTEGER,not-accessible,,current,inbound(1):outbound(2),The Vlan direction to which this ACL instance applies.
.1.3.6.1.4.1.4526.11.3.2.13.1.3,NETGEAR-QOS-ACL-MIB::aclVlanSequence,Unsigned32,not-accessible,,current,,The relative evaluation sequence of this ACL for this Vlan and direction. When multiple ACLs are allowed  for a given Vlan and direction, the sequence number  determines the order in which the list of ACLs are evaluated, with lower sequence numbers given higher precedence. The sequence number value is arbitrary, but must be a unique non-zero value for a given Vlan and direction.  Setting this object to an existing sequence number  value for a given Vlan and direction causes the  ACL corresponding to that value to be replaced with this ACL.
.1.3.6.1.4.1.4526.11.3.2.13.1.4,NETGEAR-QOS-ACL-MIB::aclVlanAclType,INTEGER,not-accessible,,current,ip(1):mac(2):ipv6(3),The type of this ACL, which is used to interpret the  aclVlanId object value. Each type of ACL uses its own numbering scheme for identification (see aclVlanAclId object for details). The aclVlanAclId object must be specified along with this  object.
.1.3.6.1.4.1.4526.11.3.2.13.1.5,NETGEAR-QOS-ACL-MIB::aclVlanAclId,Integer32,not-accessible,,current,,The ACL identifier value, which is interpreted based on the aclVlanType object. For the IP ACLs, the actual ACL number is its identifier as follows: IP standard ranges from 1-99, while  IP extended ranges from 100-199. Here, aclVlanAclId represents  aclIndex.  The MAC ACLs use an internally-generated index value  that is assigned when the ACL is created. Here, aclVlanAclId  represents aclMacIndex. The IPv6 ACLs use an internally-generated index value that is assigned when the ACL is created.Here, aclVlanAclId  represents aclIpv6Index. The aclVlanType object must be specified along with this object.
.1.3.6.1.4.1.4526.11.3.2.13.1.6,NETGEAR-QOS-ACL-MIB::aclVlanStatus,INTEGER,read-create,,current,active(1):notInService(2):notReady(3):createAndGo(4):createAndWait(5):destroy(6),Status of this instance.  active(1) - this ACL Vlan instance is active createAndGo(4) - set to this value to assign an ACL to a Vlan and direction destroy(6) - set to this value to remove an ACL from a Vlan and direction
.1.3.6.1.4.1.4526.11.3.3,NETGEAR-QOS-COS-MIB::agentQOSCOS,,,,,,The MIB definitions for Quality of Service - CoS Flex package.
.1.3.6.1.4.1.4526.11.3.3.1,NETGEAR-QOS-COS-MIB::agentCosMapCfgGroup,,,,,,
.1.3.6.1.4.1.4526.11.3.3.1.1,NETGEAR-QOS-COS-MIB::agentCosMapIpPrecTable,,not-accessible,,current,,A table mapping evaluated IP precedence to Traffic  Class for a specific physical port. Traffic class  is a number in the range  (0..(dot1dPortNumTrafficClasses-1)).
.1.3.6.1.4.1.4526.11.3.3.1.1.1,NETGEAR-QOS-COS-MIB::agentCosMapIpPrecEntry,,not-accessible,agentCosMapIpPrecIntfIndex:agentCosMapIpPrecValue,current,,IP Precedence to Traffic Class mapping for a port.
.1.3.6.1.4.1.4526.11.3.3.1.1.1.1,NETGEAR-QOS-COS-MIB::agentCosMapIpPrecIntfIndex,Integer32,not-accessible,,current,,This is a unique index for an entry in the  agentCosMapIpPrecTable. A non-zero value indicates  the ifIndex for the corresponding interface entry  in the ifTable. A value of zero represents global configuration, which in turn causes all interface
.1.3.6.1.4.1.4526.11.3.3.1.1.1.2,NETGEAR-QOS-COS-MIB::agentCosMapIpPrecValue,Unsigned32,not-accessible,,current,,The IP precedence value contained in the received  frame. This value is only indicated in IP packets,  but is independent of both media-type and frame  tagging.  Non-IP packets are handled in accordance with the  dot1dPortDefaultUserPriority value of the ingress  port.
.1.3.6.1.4.1.4526.11.3.3.1.1.1.3,NETGEAR-QOS-COS-MIB::agentCosMapIpPrecTrafficClass,Unsigned32,read-write,,current,,Traffic class priority queue the received frame is  mapped to. This represents the actual configuration  setting the port is using.
.1.3.6.1.4.1.4526.11.3.3.1.2,NETGEAR-QOS-COS-MIB::agentCosMapIpDscpTable,,not-accessible,,current,,A table mapping evaluated IP DSCP to Traffic Class  for a specific physical port. Traffic class is a  number in the range  (0..(dot1dPortNumTrafficClasses-1)).
.1.3.6.1.4.1.4526.11.3.3.1.2.1,NETGEAR-QOS-COS-MIB::agentCosMapIpDscpEntry,,not-accessible,agentCosMapIpDscpIntfIndex:agentCosMapIpDscpValue,current,,IP DSCP to Traffic Class mapping for a port.
.1.3.6.1.4.1.4526.11.3.3.1.2.1.1,NETGEAR-QOS-COS-MIB::agentCosMapIpDscpIntfIndex,Integer32,not-accessible,,current,,This is a unique index for an entry in the  agentCosMapIpDscpTable. A non-zero value indicates  the ifIndex for the corresponding interface entry  in the ifTable. A value of zero represents global configuration, which in turn causes all interface
.1.3.6.1.4.1.4526.11.3.3.1.2.1.2,NETGEAR-QOS-COS-MIB::agentCosMapIpDscpValue,Unsigned32,not-accessible,,current,,The IP DSCP value contained in the received frame.  This value is only indicated in IP packets, but is  independent of both media-type and frame tagging.  Non-IP packets are handled in accordance with the  dot1dPortDefaultUserPriority value of the ingress  port.
.1.3.6.1.4.1.4526.11.3.3.1.2.1.3,NETGEAR-QOS-COS-MIB::agentCosMapIpDscpTrafficClass,Unsigned32,read-write,,current,,Traffic class priority queue the received frame is  mapped to.
.1.3.6.1.4.1.4526.11.3.3.1.3,NETGEAR-QOS-COS-MIB::agentCosMapIntfTrustTable,,not-accessible,,current,,Specifies the interface trust mode of operation for  a port. The trust mode setting determines which COS  mapping table is used for directing ingress packets  to a Traffic Class.
.1.3.6.1.4.1.4526.11.3.3.1.3.1,NETGEAR-QOS-COS-MIB::agentCosMapIntfTrustEntry,,not-accessible,agentCosMapIntfTrustIntfIndex,current,,COS interface trust mode.
.1.3.6.1.4.1.4526.11.3.3.1.3.1.1,NETGEAR-QOS-COS-MIB::agentCosMapIntfTrustIntfIndex,Integer32,not-accessible,,current,,This is a unique index for an entry in the  agentCosMapIntfTrustTable. A non-zero value indicates  the ifIndex for the corresponding interface entry  in the ifTable. A value of zero represents global configuration, which in turn causes all interface
.1.3.6.1.4.1.4526.11.3.3.1.3.1.2,NETGEAR-QOS-COS-MIB::agentCosMapIntfTrustMode,INTEGER,read-write,,current,untrusted(1):trustDot1p(2):trustIpPrecedence(3):trustIpDscp(4),The class of service trust mode of an interface.  When set to a trusted mode, the appropriate COS  mapping table is used as follows:  trustDot1p(2) : dot1dTrafficClassTable trustIpPrecedence(3): agentCosMapIpPrecTable trustIpDscp(4): agentCosMapIpDscpTable   For an untrusted(1) interface, packets are handled in  accordance with the dot1dPortDefaultUserPriority value  of the ingress port.
.1.3.6.1.4.1.4526.11.3.3.1.3.1.3,NETGEAR-QOS-COS-MIB::agentCosMapUntrustedTrafficClass,Unsigned32,read-only,,current,,The traffic class (i.e. hardware queue) to which all untrusted traffic is assigned. This includes all  traffic when the agentCosMapIntfTrustMode is set to  This is a read-only object that reflects the current setting
.1.3.6.1.4.1.4526.11.3.3.2,NETGEAR-QOS-COS-MIB::agentCosQueueCfgGroup,,,,,,
.1.3.6.1.4.1.4526.11.3.3.2.1,NETGEAR-QOS-COS-MIB::agentCosQueueNumQueuesPerPort,Unsigned32,read-only,,current,,The number of configurable COS queues per port  supported by the hardware device.
.1.3.6.1.4.1.4526.11.3.3.2.2,NETGEAR-QOS-COS-MIB::agentCosQueueNumDropPrecedenceLevels,Unsigned32,read-only,,current,,The number of distinct drop precedence levels per  queue supported by the hardware device. These levels  are typically used when configuring the queue  management tail drop and WRED parameters.
.1.3.6.1.4.1.4526.11.3.3.2.3,NETGEAR-QOS-COS-MIB::agentCosQueueControlTable,,not-accessible,,current,,Table of class-of-service queue configuration  controls for the specified interface.
.1.3.6.1.4.1.4526.11.3.3.2.3.1,NETGEAR-QOS-COS-MIB::agentCosQueueControlEntry,,not-accessible,agentCosQueueIntfIndex,current,,Provides a general control mechanism that affects  all queues on a given interface.
.1.3.6.1.4.1.4526.11.3.3.2.3.1.1,NETGEAR-QOS-COS-MIB::agentCosQueueIntfIndex,Integer32,not-accessible,,current,,This is a unique index for an entry in the  agentCosQueueControlTable, agentCosQueueTable, the ifIndex for the corresponding interface entry  in the ifTable. A value of zero represents global configuration, which in turn causes all interface
.1.3.6.1.4.1.4526.11.3.3.2.3.1.2,NETGEAR-QOS-COS-MIB::agentCosQueueIntfShapingRate,Unsigned32,read-write,,current,,Maximum bandwidth allowed for this interface as a  whole, typically used to shape the outbound  transmission rate. The value is specified in terms  of percentage of overall link speed for the port in  5% increments. A value of 0 means there is no  maximum bandwidth limit in effect and that the  interface is allowed to transmit up to its maximum  line rate (i.e., work conserving method).  The default value is 0.  When set to a non-zero value, the interface is  restricted to using at most the bandwidth specified  in this object for the outbound transmission rate  (i.e., non-work-conserving method). This bandwidth  value is independent of any per-queue maximum  bandwidth value(s) in effect for the interface, as  specified in the agentCosQueueMaxBandwidth ohject,  and should be considered as a second-level  transmission rate control mechanism that regulates  the output of the entire interface regardless of  which queues originate the outbound traffic.
.1.3.6.1.4.1.4526.11.3.3.2.3.1.3,NETGEAR-QOS-COS-MIB::agentCosQueueMgmtTypeIntf,INTEGER,read-write,,current,taildrop(1):wred(2),The management technique used for all queues on this  interface. If taildrop(1), then all new packets  presented to the queues are dropped based on some  maximum threshold value(s). If wred(2), then an  active queue management scheme is employed whereby  packet drop precedence is considered during times of  queue congestion using WRED parameters. The  necessary queue management parameters are specified  in the agentCosQueueMgmtTable for the corresponding  agentCosQueueIntfIndex value. The default for this object is taildrop(1).  Implementations that support this object but do not  support weighted RED must return taildrop(1) for this  value and must not allow a value of wred(2) to be set.
.1.3.6.1.4.1.4526.11.3.3.2.3.1.4,NETGEAR-QOS-COS-MIB::agentCosQueueWredDecayExponent,Unsigned32,read-write,,current,,The decay exponent value used with the weighted  random early discard (WRED) algorithm to determine  how quickly the average queue length calculation  reacts to the current length of the queue. A higher  value produces a slower response, meaning previously  sampled queue length values are factored into the  calculation for a longer period of time. The default  value is 9.  Use caution when changing this value from its  default. If set too low, short traffic bursts can  cause WRED to drop too many packets. If set too  high, WRED might not detect queue congestion in a  timely manner and becomes ineffective. The default  value should be sufficient for most users.  This object value is only used when the  agentCosQueueMgmtType is set to wred(2) and is  otherwise ignored.
.1.3.6.1.4.1.4526.11.3.3.2.3.1.5,NETGEAR-QOS-COS-MIB::agentCosQueueDefaultsRestore,INTEGER,read-write,,current,enable(1):disable(2),Causes the default values to be restored for all COS  queue objects defined for this interface. This  includes objects in the following tables:  agentCosQueueTable agentCosQueueMgmtTable  This object always reads as disable(2). This object may  only be set to enable(1), which immediately causes the  default value restoration action as described above.  In essence, this models a momentary-style push button  switch that triggers a restoration of the original  default values for all affected objects.
.1.3.6.1.4.1.4526.11.3.3.2.4,NETGEAR-QOS-COS-MIB::agentCosQueueTable,,not-accessible,,current,,Table of class-of-service queue configuration  parameters for the specified interface.
.1.3.6.1.4.1.4526.11.3.3.2.4.1,NETGEAR-QOS-COS-MIB::agentCosQueueEntry,,not-accessible,agentCosQueueIntfIndex:agentCosQueueIndex,current,,Each entry describes a single class-of-service (COS)  queue for a given Interface Index. The number of  configurable COS queues for an interface vary based  All objects defined for this table entry contain a  default value corresponding to a typical,  non-preferential treatment of packets traversing the  interface's COS queues.
.1.3.6.1.4.1.4526.11.3.3.2.4.1.1,NETGEAR-QOS-COS-MIB::agentCosQueueIndex,Unsigned32,not-accessible,,current,,The COS queue index, numbered 0 to (n-1), where n is  the total number of configurable interface queues for  the device as indicated by agentCosQueueNumQueuesPerPort. In general, a higher numbered queue index is used to  support higher priority traffic, although actual  operation may be altered via configuration through  this table.
.1.3.6.1.4.1.4526.11.3.3.2.4.1.2,NETGEAR-QOS-COS-MIB::agentCosQueueSchedulerType,INTEGER,read-write,,current,strict(1):weighted(2),The type of scheduling used for this queue. If  strict(1), then all traffic placed on this queue is  transmitted before any queue with a lower precedence  (lower agentCosQueueIndex). A weighted(2) scheme  gives this queue service relative to other weighted  queues based on their relative agentCosQueueMinBandwidth 
.1.3.6.1.4.1.4526.11.3.3.2.4.1.3,NETGEAR-QOS-COS-MIB::agentCosQueueMinBandwidth,Unsigned32,read-write,,current,,Minimum guaranteed bandwidth allotted to this queue.  The value is specified in terms of percentage of  overall link speed for the port in 5% increments. A  value of 0 means there is no guaranteed minimum  bandwidth in effect (best-effort service).  The default value is 0.  The sum of all agentCosQueueMinBandwidth object  values for the queues on the same interface must not  exceed 100%.  If the agentCosQueueMaxBandwidth corresponding to the  same agentCosQueueIndex on this interface is  currently set to a non-zero value, then setting this  object to a value greater than  agentCosQueueMaxBandwidth automatically updates  agentCosQueueMaxBandwidth to the same value to  maintain a proper relationship between the minimum  and maximum queue bandwidth specification.  The value of this object is ignored when  agentCosQueueSchedulerType is set to strict(1).
.1.3.6.1.4.1.4526.11.3.3.2.4.1.4,NETGEAR-QOS-COS-MIB::agentCosQueueMaxBandwidth,Unsigned32,read-write,,current,,Maximum bandwidth allowed for this queue, typically  used to shape the outbound transmission rate. The  value is specified in terms of percentage of overall  link speed for the port in 5% increments. A value  of 0 means there is no maximum bandwidth limit in  effect and that the queue is allowed to use any  available excess bandwidth (i.e., work conserving  method). The default value is 0.  When set to a non-zero value, the queue is restricted  to using at most the bandwidth specified in this  object for the outbound transmission rate (i.e.,  non-work-conserving method). Any non-zero value set  for this object must be equal to or greater than the  value of agentCosQueueMinBandwidth for the same  agentCosQueueIndex on this interface.
.1.3.6.1.4.1.4526.11.3.3.2.4.1.5,NETGEAR-QOS-COS-MIB::agentCosQueueMgmtType,INTEGER,read-write,,current,taildrop(1):wred(2),The queue depth management technique used when  per-queue specification is supported. If  taildrop(1), then all new packets presented to the  queue are dropped based on some maximum threshold  value(s). If wred(2), then an active queue management  scheme is employed whereby packet drop precedence is  considered during times of queue congestion using  WRED parameters. The necessary queue management  parameters are specified in the  agentCosQueueMgmtEntry for the corresponding   Implementations that do not support weighted RED must  return taildrop(1) for this value and must not allow  a value of wred(2) to be set.
.1.3.6.1.4.1.4526.11.3.3.2.5,NETGEAR-QOS-COS-MIB::agentCosQueueMgmtTable,,not-accessible,,current,,Table of class-of-service queue drop precedence  configuration parameters. The values in this table  are used based on the agentCosQueueMgmtType for the  corresponding agentCosQueueIntfIndex and agentCosQueueIndex  values. These parameters are specified for each  drop precedence level supported within a queue.
.1.3.6.1.4.1.4526.11.3.3.2.5.1,NETGEAR-QOS-COS-MIB::agentCosQueueMgmtEntry,,not-accessible,agentCosQueueIntfIndex:agentCosQueueIndex:agentCosQueueDropPrecIndex,current,,The individual objects in this table are specified  for each drop precedence level supported within a  particular queue on a given interface. Each object's  usage is based on the current setting of the  agentCosQueueMgmtType.   See the individual object descriptions for details.
.1.3.6.1.4.1.4526.11.3.3.2.5.1.1,NETGEAR-QOS-COS-MIB::agentCosQueueDropPrecIndex,Unsigned32,not-accessible,,current,,The COS queue drop precedence level, numbered 1 to  p, where p is the total number of drop precedences  supported per queue, as indicated by  precedence level for a queue has its own set of  configuration parameters.  The actual number of drop precedence levels supported  depends on the device characteristics. For example,  some implementations may allow for three levels of  drop precedence (1/2/3, sometimes referred to as 
.1.3.6.1.4.1.4526.11.3.3.2.5.1.2,NETGEAR-QOS-COS-MIB::agentCosQueueMgmtTailDropThreshold,Unsigned32,read-write,,current,,Tail drop queue threshold above which all packets  are dropped for the current drop precedence level.  The value specifies the threshold based on a fraction  of the overall device queue size in terms of  sixteenths (0/16, 1/16, 2/16 , 16/16). Since device  implementations vary, the actual value deployed may  be rounded up or down accordingly.   The default value is calculated from the  agentCosQueueIndex and agentCosQueueDropPrecIndex as  shown in the following table (values listed for drop  precedence levels 1, 2, and 3, respectively): Queue Index 0: 16, 14, 12 Queue Index 1: 16, 14, 12 Queue Index 2: 16, 14, 12 Queue Index 3: 16, 14, 12 Queue Index 4: 16, 14, 12 Queue Index 5: 16, 14, 12 Queue Index 6: 16, 14, 12 Queue Index 7: 16, 14, 12  This object is only used when agentCosQueueMgmtType  is set to taildrop(1).
.1.3.6.1.4.1.4526.11.3.3.2.5.1.3,NETGEAR-QOS-COS-MIB::agentCosQueueMgmtWredMinThreshold,Unsigned32,read-write,,current,,Weighted RED minimum queue threshold, below which no  packets are dropped for the current drop precedence  level. The value specifies the threshold based on a  fraction of the overall device queue size in terms of  sixteenths (0/16, 1/16, 2/16 , 16/16). Since device  implementations vary, the actual value deployed may  be rounded up or down accordingly.   The default value is calculated from the  agentCosQueueIndex and agentCosQueueDropPrecIndex as  shown in the following table (values listed for drop  precedence levels 1, 2, and 3, respectively): Queue Index 0: 8, 6, 4 Queue Index 1: 9, 7, 5 Queue Index 2: 10, 8, 6 Queue Index 3: 11, 9, 7 Queue Index 4: 12, 10, 8 Queue Index 5: 13, 11, 9 Queue Index 6: 14, 12, 10 Queue Index 7: 15, 13, 11  This object is only used when agentCosQueueMgmtType  is set to wred(2). Any value set for this object must  be equal to or less than the value of  agentCosQueueMgmtWredMaxThreshold.
.1.3.6.1.4.1.4526.11.3.3.2.5.1.4,NETGEAR-QOS-COS-MIB::agentCosQueueMgmtWredMaxThreshold,Unsigned32,read-write,,current,,Weighted RED maximum queue threshold, above which  all packets are dropped for the current drop  precedence level. The value specifies the threshold  based on a fraction the overall device queue size in  terms of sixteenths (0/16, 1/16, 2/16 , 16/16). Since  device implementations vary, the actual value  deployed may be rounded up or down accordingly.   The default value is calculated from the  agentCosQueueIndex and agentCosQueueDropPrecIndex as  shown in the following table (values listed for drop  precedence levels 1, 2, and 3, respectively): Queue Index 0: 16, 14, 12 Queue Index 1: 16, 14, 12 Queue Index 2: 16, 14, 12 Queue Index 3: 16, 14, 12 Queue Index 4: 16, 14, 12 Queue Index 5: 16, 14, 12 Queue Index 6: 16, 14, 12 Queue Index 7: 16, 14, 12  This object is only used when agentCosQueueMgmtType  is set to wred(2). Any value set for this object must  be equal to or greater than the value of  agentCosQueueMgmtWredMinThreshold.
.1.3.6.1.4.1.4526.11.3.3.2.5.1.5,NETGEAR-QOS-COS-MIB::agentCosQueueMgmtWredDropProbScale,Unsigned32,read-write,,current,,A scaling factor used for the WRED calculation to  determine the packet drop probability for the current  drop precedence level. The value is specified as a  number S from 1-15 and is used in the formula: 1/(2** S), meaning one packet is dropped out of every (2** S). Packet dropping begins when  agentCosQueueMgmtWredMinThreshold is reached and  proceeds linearly up to the (2**S) value specified by  this object until the  agentCosQueueMgmtWredMaxThreshold is reached, beyond  which all packets are dropped. Smaller values of S  produce a steeper slope, hence a higher incidence of  randomly dropped packets.   The default value is 10, which corresponds to a drop  rate of 1 out of every (2**10)=1024 packets.   This object is only used when agentCosQueueMgmtType  is set to wred(2).
.1.3.6.1.4.1.4526.11.6,NETGEAR-QOS-DIFFSERV-EXTENSIONS-MIB::agentQOSDiffServExtensions,,,,,,Initial version
.1.3.6.1.4.1.4526.11.6.1,NETGEAR-QOS-DIFFSERV-EXTENSIONS-MIB::agentDiffServMIBObjects,,,,,,
.1.3.6.1.4.1.4526.11.6.1.1,NETGEAR-QOS-DIFFSERV-EXTENSIONS-MIB::agentDiffServClassifier,,,,,,
.1.3.6.1.4.1.4526.11.6.1.1.1,NETGEAR-QOS-DIFFSERV-EXTENSIONS-MIB::agentDiffServAuxMfClfrNextFree,Unsigned32,read-only,,current,,This object contains an unused value for agentDiffServAuxMfClfrId , or a zero to indicate that none exist.
.1.3.6.1.4.1.4526.11.6.1.1.2,NETGEAR-QOS-DIFFSERV-EXTENSIONS-MIB::agentDiffServAuxMfClfrTable,,not-accessible,,current,,A table of Auxiliary Multi-field Classifier filter entries that a system may use to identify IP traffic.
.1.3.6.1.4.1.4526.11.6.1.1.2.1,NETGEAR-QOS-DIFFSERV-EXTENSIONS-MIB::agentDiffServAuxMfClfrEntry,,not-accessible,agentDiffServAuxMfClfrId,current,,An IP Multi-field Classifier entry describes a single filter.
.1.3.6.1.4.1.4526.11.6.1.1.2.1.1,NETGEAR-QOS-DIFFSERV-EXTENSIONS-MIB::agentDiffServAuxMfClfrId,Unsigned32,not-accessible,,current,,An index that enumerates the Auxiliary MultiField Classifier filter entries. Managers obtain new values for row creation in this table by reading agentDiffServAuxMfClfrNextFree.
.1.3.6.1.4.1.4526.11.6.1.1.2.1.2,NETGEAR-QOS-DIFFSERV-EXTENSIONS-MIB::agentDiffServAuxMfClfrDstAddr,IpAddress,read-create,,current,,The IP address to match against the packet's destination IP address.
.1.3.6.1.4.1.4526.11.6.1.1.2.1.3,NETGEAR-QOS-DIFFSERV-EXTENSIONS-MIB::agentDiffServAuxMfClfrDstMask,IpAddress,read-create,,current,,This mask value identifies the portion of agentDiffServAuxMfClfrDstAddr that is compared against a packet. 
.1.3.6.1.4.1.4526.11.6.1.1.2.1.4,NETGEAR-QOS-DIFFSERV-EXTENSIONS-MIB::agentDiffServAuxMfClfrSrcAddr,IpAddress,read-create,,current,,The IP address to match against the packet's source IP address.
.1.3.6.1.4.1.4526.11.6.1.1.2.1.5,NETGEAR-QOS-DIFFSERV-EXTENSIONS-MIB::agentDiffServAuxMfClfrSrcMask,IpAddress,read-create,,current,,This mask value identifies the portion of agentDiffServAuxMfClfrSrcAddr that is compared against a packet. 
.1.3.6.1.4.1.4526.11.6.1.1.2.1.6,NETGEAR-QOS-DIFFSERV-EXTENSIONS-MIB::agentDiffServAuxMfClfrProtocol,Unsigned32,read-create,,current,,The IP protocol to match against the IPv4 protocol number. A value of 255 means match all. 
.1.3.6.1.4.1.4526.11.6.1.1.2.1.7,NETGEAR-QOS-DIFFSERV-EXTENSIONS-MIB::agentDiffServAuxMfClfrDstL4PortMin,Unsigned32,read-create,,current,,The minimum value that the layer-4 destination port number in the packet must have in order to match this classifier entry. 
.1.3.6.1.4.1.4526.11.6.1.1.2.1.8,NETGEAR-QOS-DIFFSERV-EXTENSIONS-MIB::agentDiffServAuxMfClfrDstL4PortMax,Unsigned32,read-create,,current,,The maximum value that the layer-4 destination port number in the  packet must have in order to match this classifier entry.  for this entry in agentDiffServAuxMfClfrDstL4PortMin. 
.1.3.6.1.4.1.4526.11.6.1.1.2.1.9,NETGEAR-QOS-DIFFSERV-EXTENSIONS-MIB::agentDiffServAuxMfClfrSrcL4PortMin,Unsigned32,read-create,,current,,The minimum value that the layer-4 source port number in the packet must have in order to match this classifier entry. 
.1.3.6.1.4.1.4526.11.6.1.1.2.1.10,NETGEAR-QOS-DIFFSERV-EXTENSIONS-MIB::agentDiffServAuxMfClfrSrcL4PortMax,Unsigned32,read-create,,current,,The maximum value that the layer-4 source port number in the packet must have in order to match this classifier entry. This value must be equal to or greater than the value specified for this entry in diffServMultiFieldClfrSrcL4PortMin. 
.1.3.6.1.4.1.4526.11.6.1.1.2.1.11,NETGEAR-QOS-DIFFSERV-EXTENSIONS-MIB::agentDiffServAuxMfClfrCos,Integer32,read-create,,current,,Three-bit user priority field in the 802.1Q tag header of a tagged  Ethernet frame used as a class-match parameter. For frames  containing a double VLAN tag, this field is located in the first/outer tag. A value of -1 indicates that a specific COS value has not been
.1.3.6.1.4.1.4526.11.6.1.1.2.1.12,NETGEAR-QOS-DIFFSERV-EXTENSIONS-MIB::agentDiffServAuxMfClfrTos,OCTET,read-create,,current,,IP TOS bits value, defined as all eight bits of the Service  Type octet in the IPv4 header. There are multiple, overlapping,  Precedence (bits 7-5): IP Precedence, values 0-7
.1.3.6.1.4.1.4526.11.6.1.1.2.1.13,NETGEAR-QOS-DIFFSERV-EXTENSIONS-MIB::agentDiffServAuxMfClfrTosMask,OCTET,read-create,,current,,IP TOS bits mask value. It identifies the portion of  agentDiffServAuxMfClfrTos that is compared against a packet.  There are multiple, overlapping meanings of the TOS octet in use today. Precedence (bits 7-5): 224 (bit mask '11100000') Other mask values are also permitted.
.1.3.6.1.4.1.4526.11.6.1.1.2.1.14,NETGEAR-QOS-DIFFSERV-EXTENSIONS-MIB::agentDiffServAuxMfClfrDstMac,OCTET,read-create,,current,,Destination MAC address. 
.1.3.6.1.4.1.4526.11.6.1.1.2.1.15,NETGEAR-QOS-DIFFSERV-EXTENSIONS-MIB::agentDiffServAuxMfClfrDstMacMask,OCTET,read-create,,current,,Destination MAC address mask value. This mask value identifies the portion of agentDiffServAuxMfClfrDstMac 
.1.3.6.1.4.1.4526.11.6.1.1.2.1.16,NETGEAR-QOS-DIFFSERV-EXTENSIONS-MIB::agentDiffServAuxMfClfrSrcMac,OCTET,read-create,,current,,Source MAC address. 
.1.3.6.1.4.1.4526.11.6.1.1.2.1.17,NETGEAR-QOS-DIFFSERV-EXTENSIONS-MIB::agentDiffServAuxMfClfrSrcMacMask,OCTET,read-create,,current,,Source MAC address mask value. This mask value identifies the portion of agentDiffServAuxMfClfrSrcMac 
.1.3.6.1.4.1.4526.11.6.1.1.2.1.18,NETGEAR-QOS-DIFFSERV-EXTENSIONS-MIB::agentDiffServAuxMfClfrVlanId,Integer32,read-create,,obsolete,,VLAN ID value for the classifier. A value of -1 indicates that  a specific VLAN ID value has not been defined and thus all  VLAN ID values are considered a match.
.1.3.6.1.4.1.4526.11.6.1.1.2.1.19,NETGEAR-QOS-DIFFSERV-EXTENSIONS-MIB::agentDiffServAuxMfClfrStorage,INTEGER,read-create,,current,other(1):volatile(2):nonVolatile(3):permanent(4):readOnly(5),The storage type for this conceptual row. 
.1.3.6.1.4.1.4526.11.6.1.1.2.1.20,NETGEAR-QOS-DIFFSERV-EXTENSIONS-MIB::agentDiffServAuxMfClfrStatus,INTEGER,read-create,,current,active(1):notInService(2):notReady(3):createAndGo(4):createAndWait(5):destroy(6),The status of this conceptual row.
.1.3.6.1.4.1.4526.11.6.1.1.2.1.21,NETGEAR-QOS-DIFFSERV-EXTENSIONS-MIB::agentDiffServAuxMfClfrCos2,Integer32,read-create,,current,,Three-bit user priority field in the second/inner 802.1Q tag header of a  double VLAN tagged Ethernet frame used as a class-match parameter 
.1.3.6.1.4.1.4526.11.6.1.1.2.1.22,NETGEAR-QOS-DIFFSERV-EXTENSIONS-MIB::agentDiffServAuxMfClfrEtypeVal1,Unsigned32,read-create,,current,,Ethertype value to be compared in order to match this classifier entry.
.1.3.6.1.4.1.4526.11.6.1.1.2.1.23,NETGEAR-QOS-DIFFSERV-EXTENSIONS-MIB::agentDiffServAuxMfClfrEtypeVal2,Unsigned32,read-create,,current,,A second Ethertype value to be compared in order to match  this classifier entry. This value is considered in addition
.1.3.6.1.4.1.4526.11.6.1.1.2.1.24,NETGEAR-QOS-DIFFSERV-EXTENSIONS-MIB::agentDiffServAuxMfClfrVlanIdMin,Unsigned32,read-create,,current,,The minimum value that the VLAN ID in the packet must have in order to match this classifier entry. This field is defined as the 12-bit VLAN identifier in the 802.1Q tag header of a 
.1.3.6.1.4.1.4526.11.6.1.1.2.1.25,NETGEAR-QOS-DIFFSERV-EXTENSIONS-MIB::agentDiffServAuxMfClfrVlanIdMax,Unsigned32,read-create,,current,,The maximum value that the VLAN ID in the packet must have in order to match this classifier entry. This field is defined as the 12-bit VLAN identifier in the 802.1Q tag header of a  agentDiffServAuxMfClfrVlanIdMin.
.1.3.6.1.4.1.4526.11.6.1.1.2.1.26,NETGEAR-QOS-DIFFSERV-EXTENSIONS-MIB::agentDiffServAuxMfClfrVlanId2Min,Unsigned32,read-create,,current,,The minimum value that the Secondary VLAN ID in the packet must have in order to match this classifier entry. This field is defined as the 12-bit VLAN identifier in the second/inner 802.1Q tag header 
.1.3.6.1.4.1.4526.11.6.1.1.2.1.27,NETGEAR-QOS-DIFFSERV-EXTENSIONS-MIB::agentDiffServAuxMfClfrVlanId2Max,Unsigned32,read-create,,current,,The maximum value that the Secondary VLAN ID in the packet must have in order to match this classifier entry. This field is defined as the 12-bit VLAN identifier in the second/inner 802.1Q tag header agentDiffServAuxMfClfrVlanId2Min.
.1.3.6.1.4.1.4526.11.6.1.2,NETGEAR-QOS-DIFFSERV-EXTENSIONS-MIB::agentDiffServAction,,,,,,
.1.3.6.1.4.1.4526.11.6.1.2.2,NETGEAR-QOS-DIFFSERV-EXTENSIONS-MIB::agentDiffServCosMarkActTable,,not-accessible,,current,,This table enumerates specific Class of Service values used for marking or remarking the priority bits in the 802.1p header. The entries of this  table may be referenced by a diffServActionSpecific attribute.
.1.3.6.1.4.1.4526.11.6.1.2.2.1,NETGEAR-QOS-DIFFSERV-EXTENSIONS-MIB::agentDiffServCosMarkActEntry,,not-accessible,agentDiffServCosMarkActCos,current,,An entry in the COS mark action table that describes a single Class of Service value used for marking.
.1.3.6.1.4.1.4526.11.6.1.2.2.1.1,NETGEAR-QOS-DIFFSERV-EXTENSIONS-MIB::agentDiffServCosMarkActCos,Integer32,read-only,,current,,The Class of Service value that this Action will store into the priority bits of the 802.1p header. It is quite possible that the  only packets subject to this Action are already marked with this COS  value.
.1.3.6.1.4.1.4526.11.6.1.2.4,NETGEAR-QOS-DIFFSERV-EXTENSIONS-MIB::agentDiffServIpPrecMarkActTable,,not-accessible,,current,,This table enumerates specific IP Precedence values used for marking or remarking the Precedence field of IP packets. The entries of this  table may be referenced by a diffServActionSpecific attribute.
.1.3.6.1.4.1.4526.11.6.1.2.4.1,NETGEAR-QOS-DIFFSERV-EXTENSIONS-MIB::agentDiffServIpPrecMarkActEntry,,not-accessible,agentDiffServIpPrecMarkActPrecedence,current,,An entry in the IP Precedence mark action table that describes a single IP Precedence value used for marking.
.1.3.6.1.4.1.4526.11.6.1.2.4.1.1,NETGEAR-QOS-DIFFSERV-EXTENSIONS-MIB::agentDiffServIpPrecMarkActPrecedence,Integer32,read-only,,current,,The IP Precedence that this Action will store into the Precedence field of the IP packet. It is quite possible that the only packets  subject to this Action are already marked with this IP Precedence.  Note also that Differentiated Services processing may result in a packet being marked on both ingress to a network and on egress from  it, and that ingress and egress can occur in the same router.
.1.3.6.1.4.1.4526.11.6.1.2.5,NETGEAR-QOS-DIFFSERV-EXTENSIONS-MIB::agentDiffServCos2MarkActTable,,not-accessible,,current,,This table enumerates specific Secondary Class of Service values used for marking or remarking the priority bits in the second/inner 802.1Q tag header of a double VLAN tagged Ethernet packet. The entries of this table may be referenced by  a diffServActionSpecific attribute.
.1.3.6.1.4.1.4526.11.6.1.2.5.1,NETGEAR-QOS-DIFFSERV-EXTENSIONS-MIB::agentDiffServCos2MarkActEntry,,not-accessible,agentDiffServCos2MarkActCos,current,,An entry in the Secondary COS mark action table that describes a single Class of Service value used for marking.
.1.3.6.1.4.1.4526.11.6.1.2.5.1.1,NETGEAR-QOS-DIFFSERV-EXTENSIONS-MIB::agentDiffServCos2MarkActCos,Integer32,read-only,,current,,The Secondary Class of Service value that this Action will store into the priority bits of the second/inner 802.1p tag header. It is quite possible that the only packets subject to this Action are already marked with this COS value.
.1.3.6.1.4.1.4526.11.6.1.2.6,NETGEAR-QOS-DIFFSERV-EXTENSIONS-MIB::agentDiffServAssignQueueNextFree,Unsigned32,read-only,,current,,This object contains an unused value for agentDiffServAssignIndex, or a zero to indicate that none exist.
.1.3.6.1.4.1.4526.11.6.1.2.7,NETGEAR-QOS-DIFFSERV-EXTENSIONS-MIB::agentDiffServAssignQueueTable,,not-accessible,,current,,A table used for assigning a stream of Differentiated Services traffic to a specific quality of service (QoS) queue.  The traffic stream is identified by the upstream Functional  Data Path Element(s), i.e. by the object(s) that point to each entry in this table. This may include all traffic on an interface or just a portion thereof.
.1.3.6.1.4.1.4526.11.6.1.2.7.1,NETGEAR-QOS-DIFFSERV-EXTENSIONS-MIB::agentDiffServAssignQueueEntry,,not-accessible,agentDiffServAssignQueueIndex,current,,An entry in the assign queue table describes a specific (egress) QoS queue identifier for a traffic stream.
.1.3.6.1.4.1.4526.11.6.1.2.7.1.1,NETGEAR-QOS-DIFFSERV-EXTENSIONS-MIB::agentDiffServAssignQueueIndex,Unsigned32,not-accessible,,current,,An index that enumerates the Assign Queue entries. Managers obtain new values for row creation in this table by reading agentDiffServAssignQueueNextFree.
.1.3.6.1.4.1.4526.11.6.1.2.7.1.2,NETGEAR-QOS-DIFFSERV-EXTENSIONS-MIB::agentDiffServAssignQueueQnum,Unsigned32,read-create,,current,,The queue identifier value. This value indicates the QoS queue number to which the traffic stream for this data path is directed 
.1.3.6.1.4.1.4526.11.6.1.2.7.1.3,NETGEAR-QOS-DIFFSERV-EXTENSIONS-MIB::agentDiffServAssignQueueStorage,INTEGER,read-create,,current,other(1):volatile(2):nonVolatile(3):permanent(4):readOnly(5),The storage type for this conceptual row. Conceptual rows having the value 'permanent' need not allow write-access to any columnar objects in the row.
.1.3.6.1.4.1.4526.11.6.1.2.7.1.4,NETGEAR-QOS-DIFFSERV-EXTENSIONS-MIB::agentDiffServAssignQueueStatus,INTEGER,read-create,,current,active(1):notInService(2):notReady(3):createAndGo(4):createAndWait(5):destroy(6),The status of this conceptual row. All writable objects in this row may be modified at any time. Setting this variable to 'destroy' when the MIB contains one or more RowPointers pointing to it results in destruction being delayed until the row is no longer used.
.1.3.6.1.4.1.4526.11.6.1.2.8,NETGEAR-QOS-DIFFSERV-EXTENSIONS-MIB::agentDiffServRedirectNextFree,Unsigned32,read-only,,current,,This object contains an unused value for agentDiffServRedirectId, or a zero to indicate that none exist.
.1.3.6.1.4.1.4526.11.6.1.2.9,NETGEAR-QOS-DIFFSERV-EXTENSIONS-MIB::agentDiffServRedirectTable,,not-accessible,,current,,A table used for redirecting a stream of Differentiated Services traffic to a specific egress interface, bypassing any normal device forwarding decision. The traffic stream is identified by 
.1.3.6.1.4.1.4526.11.6.1.2.9.1,NETGEAR-QOS-DIFFSERV-EXTENSIONS-MIB::agentDiffServRedirectEntry,,not-accessible,agentDiffServRedirectId,current,,An entry in the redirect table describes a specific external interface number used as the egress point of a traffic stream.
.1.3.6.1.4.1.4526.11.6.1.2.9.1.1,NETGEAR-QOS-DIFFSERV-EXTENSIONS-MIB::agentDiffServRedirectId,Unsigned32,not-accessible,,current,,An index that enumerates the Redirect entries. Managers obtain new values for row creation in this table by reading agentDiffServRedirectNextFree.
.1.3.6.1.4.1.4526.11.6.1.2.9.1.2,NETGEAR-QOS-DIFFSERV-EXTENSIONS-MIB::agentDiffServRedirectIntf,Integer32,read-create,,current,,The external interface number identifier value. This value indicates  the egress interface to which the traffic stream for this data path is directed. Normal traffic forwarding decisions are bypassed.
.1.3.6.1.4.1.4526.11.6.1.2.9.1.3,NETGEAR-QOS-DIFFSERV-EXTENSIONS-MIB::agentDiffServRedirectStorage,INTEGER,read-create,,current,other(1):volatile(2):nonVolatile(3):permanent(4):readOnly(5),The storage type for this conceptual row. Conceptual rows having the value 'permanent' need not allow write-access to any columnar objects in the row.
.1.3.6.1.4.1.4526.11.6.1.2.9.1.4,NETGEAR-QOS-DIFFSERV-EXTENSIONS-MIB::agentDiffServRedirectStatus,INTEGER,read-create,,current,active(1):notInService(2):notReady(3):createAndGo(4):createAndWait(5):destroy(6),The status of this conceptual row. All writable objects in this row may be modified at any time. Setting this variable to 'destroy' when the MIB contains one or more RowPointers pointing to it results in destruction being delayed until the row is no longer used.
.1.3.6.1.4.1.4526.11.6.1.2.10,NETGEAR-QOS-DIFFSERV-EXTENSIONS-MIB::agentDiffServMirrorNextFree,Unsigned32,read-only,,current,,This object contains an unused value for agentDiffServMirrorId, or a zero to indicate that none exist.
.1.3.6.1.4.1.4526.11.6.1.2.11,NETGEAR-QOS-DIFFSERV-EXTENSIONS-MIB::agentDiffServMirrorTable,,not-accessible,,current,,A table used for mirroring a stream of Differentiated Services traffic to a specific egress interface, in addition to any normal device forwarding decision. The traffic stream is identified by 
.1.3.6.1.4.1.4526.11.6.1.2.11.1,NETGEAR-QOS-DIFFSERV-EXTENSIONS-MIB::agentDiffServMirrorEntry,,not-accessible,agentDiffServMirrorId,current,,An entry in the mirror table describes a specific external interface number used as the egress point of a copied traffic
.1.3.6.1.4.1.4526.11.6.1.2.11.1.1,NETGEAR-QOS-DIFFSERV-EXTENSIONS-MIB::agentDiffServMirrorId,Unsigned32,not-accessible,,current,,An index that enumerates the Mirror entries. Managers obtain new values for row creation in this table by reading agentDiffServMirrorNextFree.
.1.3.6.1.4.1.4526.11.6.1.2.11.1.2,NETGEAR-QOS-DIFFSERV-EXTENSIONS-MIB::agentDiffServMirrorIntf,Integer32,read-create,,current,,The external interface number identifier value. This value indicates  the egress interface to which the traffic stream for this data path is copied. Normal traffic forwarding decisions are still performed
.1.3.6.1.4.1.4526.11.6.1.2.11.1.3,NETGEAR-QOS-DIFFSERV-EXTENSIONS-MIB::agentDiffServMirrorStorage,INTEGER,read-create,,current,other(1):volatile(2):nonVolatile(3):permanent(4):readOnly(5),The storage type for this conceptual row. Conceptual rows having the value 'permanent' need not allow write-access to any columnar objects in the row.
.1.3.6.1.4.1.4526.11.6.1.2.11.1.4,NETGEAR-QOS-DIFFSERV-EXTENSIONS-MIB::agentDiffServMirrorStatus,INTEGER,read-create,,current,active(1):notInService(2):notReady(3):createAndGo(4):createAndWait(5):destroy(6),The status of this conceptual row. All writable objects in this row may be modified at any time. Setting this variable to 'destroy' when the MIB contains one or more RowPointers pointing to it results in destruction being delayed until the row is no longer used.
.1.3.6.1.4.1.4526.11.6.1.3,NETGEAR-QOS-DIFFSERV-EXTENSIONS-MIB::agentDiffServMeter,,,,,,
.1.3.6.1.4.1.4526.11.6.1.3.1,NETGEAR-QOS-DIFFSERV-EXTENSIONS-MIB::agentDiffServColorAwareTable,,not-accessible,,current,,A table used for augmenting the Differentiated Services meter information with information describing the packet coloration characteristics for a color-aware mode of policing. The 
.1.3.6.1.4.1.4526.11.6.1.3.1.1,NETGEAR-QOS-DIFFSERV-EXTENSIONS-MIB::agentDiffServColorAwareEntry,,not-accessible,,current,,An entry in the color aware table describes a single color conformance  level of a meter.
.1.3.6.1.4.1.4526.11.6.1.3.1.1.1,NETGEAR-QOS-DIFFSERV-EXTENSIONS-MIB::agentDiffServColorAwareLevel,INTEGER,read-create,,current,conform(1):exceed(2):unused(3),The metering conformance level of this table entry. A policing meter  represents either a conforming or an exceeding level of traffic in the traffic stream for this data path. The color characteristics
.1.3.6.1.4.1.4526.11.6.1.3.1.1.2,NETGEAR-QOS-DIFFSERV-EXTENSIONS-MIB::agentDiffServColorAwareMode,INTEGER,read-create,,current,blind(1):awarecos(2):awarecos2(3):awareipdscp(4):awareipprec(5):awareunused(6),The color mode indicator for the meter. When set to blind(1),  metering is performed in a color-blind manner such that any  packet markings are ignored by the meter. The other values
.1.3.6.1.4.1.4526.11.6.1.3.1.1.3,NETGEAR-QOS-DIFFSERV-EXTENSIONS-MIB::agentDiffServColorAwareValue,Unsigned32,read-create,,current,,The value of the color aware table entry. This value is used  to compare the field indicated in agentDiffServColorAwareMode against packets in a traffic stream along the data path supplying the meter
.1.3.6.1.4.1.4526.11.6.2,NETGEAR-QOS-DIFFSERV-EXTENSIONS-MIB::agentDiffServMIBAdmin,,,,,,
.1.3.6.1.4.1.4526.11.6.2.1,NETGEAR-QOS-DIFFSERV-EXTENSIONS-MIB::agentDiffServTBMeters,,,,,,
.1.3.6.1.4.1.4526.11.6.2.1.1,NETGEAR-QOS-DIFFSERV-EXTENSIONS-MIB::agentDiffServTBParamSimpleTokenBucketAware,,,,,,Two Parameter Token Bucket Meter as described in the Informal Differentiated Services Model section 5.2.3, but using a  color-aware mode of operation.
.1.3.6.1.4.1.4526.11.7,NETGEAR-QOS-DIFFSERV-PRIVATE-MIB::agentQOSDiffServPrivate,,,,,,The Private MIB for FASTPATH DiffServ
.1.3.6.1.4.1.4526.11.7.1,NETGEAR-QOS-DIFFSERV-PRIVATE-MIB::agentDiffServGenStatusGroup,,,,,,
.1.3.6.1.4.1.4526.11.7.1.1,NETGEAR-QOS-DIFFSERV-PRIVATE-MIB::agentDiffServGenStatusAdminMode,INTEGER,read-write,,current,enable(1):disable(2), DiffServ Admin Mode
.1.3.6.1.4.1.4526.11.7.1.2,NETGEAR-QOS-DIFFSERV-PRIVATE-MIB::agentDiffServGenStatusClassTableSize,Unsigned32,read-only,,current,, Current size of the Class Table
.1.3.6.1.4.1.4526.11.7.1.3,NETGEAR-QOS-DIFFSERV-PRIVATE-MIB::agentDiffServGenStatusClassTableMax,Unsigned32,read-only,,current,, Max size of the Class Table
.1.3.6.1.4.1.4526.11.7.1.4,NETGEAR-QOS-DIFFSERV-PRIVATE-MIB::agentDiffServGenStatusClassRuleTableSize,Unsigned32,read-only,,current,, Current size of Class Rule Table
.1.3.6.1.4.1.4526.11.7.1.5,NETGEAR-QOS-DIFFSERV-PRIVATE-MIB::agentDiffServGenStatusClassRuleTableMax,Unsigned32,read-only,,current,, Max size of the Class Rule Table.
.1.3.6.1.4.1.4526.11.7.1.6,NETGEAR-QOS-DIFFSERV-PRIVATE-MIB::agentDiffServGenStatusPolicyTableSize,Unsigned32,read-only,,current,, Current Size of the Policy Table.
.1.3.6.1.4.1.4526.11.7.1.7,NETGEAR-QOS-DIFFSERV-PRIVATE-MIB::agentDiffServGenStatusPolicyTableMax,Unsigned32,read-only,,current,, Max size of the Policy Table
.1.3.6.1.4.1.4526.11.7.1.8,NETGEAR-QOS-DIFFSERV-PRIVATE-MIB::agentDiffServGenStatusPolicyInstTableSize,Unsigned32,read-only,,current,, Current size of the Policy-Class Instance Table
.1.3.6.1.4.1.4526.11.7.1.9,NETGEAR-QOS-DIFFSERV-PRIVATE-MIB::agentDiffServGenStatusPolicyInstTableMax,Unsigned32,read-only,,current,, Max size of the Policy-Class Instance Table
.1.3.6.1.4.1.4526.11.7.1.10,NETGEAR-QOS-DIFFSERV-PRIVATE-MIB::agentDiffServGenStatusPolicyAttrTableSize,Unsigned32,read-only,,current,, Current size of the Policy Attribute Table
.1.3.6.1.4.1.4526.11.7.1.11,NETGEAR-QOS-DIFFSERV-PRIVATE-MIB::agentDiffServGenStatusPolicyAttrTableMax,Unsigned32,read-only,,current,, Max size of the Policy Attribute Table
.1.3.6.1.4.1.4526.11.7.1.12,NETGEAR-QOS-DIFFSERV-PRIVATE-MIB::agentDiffServGenStatusServiceTableSize,Unsigned32,read-only,,current,, Current size of the Service Table
.1.3.6.1.4.1.4526.11.7.1.13,NETGEAR-QOS-DIFFSERV-PRIVATE-MIB::agentDiffServGenStatusServiceTableMax,Unsigned32,read-only,,current,, Max size of the Service Table
.1.3.6.1.4.1.4526.11.7.2,NETGEAR-QOS-DIFFSERV-PRIVATE-MIB::agentDiffServClassGroup,,,,,,
.1.3.6.1.4.1.4526.11.7.2.1,NETGEAR-QOS-DIFFSERV-PRIVATE-MIB::agentDiffServClassIndexNextFree,Unsigned32,read-only,,current,,This object contains an unused value for classIndex, or a
.1.3.6.1.4.1.4526.11.7.2.2,NETGEAR-QOS-DIFFSERV-PRIVATE-MIB::agentDiffServClassTable,,not-accessible,,current,,A table of the DiffServ class entries
.1.3.6.1.4.1.4526.11.7.2.2.1,NETGEAR-QOS-DIFFSERV-PRIVATE-MIB::agentDiffServClassEntry,,not-accessible,agentDiffServClassIndex,current,,Represents entry for a DiffServ traffic class
.1.3.6.1.4.1.4526.11.7.2.2.1.1,NETGEAR-QOS-DIFFSERV-PRIVATE-MIB::agentDiffServClassIndex,Unsigned32,not-accessible,,current,,The identifier for DiffServ Class entry 
.1.3.6.1.4.1.4526.11.7.2.2.1.2,NETGEAR-QOS-DIFFSERV-PRIVATE-MIB::agentDiffServClassName,OCTET,read-create,,current,,Name of the DiffServ traffic class
.1.3.6.1.4.1.4526.11.7.2.2.1.3,NETGEAR-QOS-DIFFSERV-PRIVATE-MIB::agentDiffServClassType,INTEGER,read-create,,current,all(1):any(2):acl(3),The class type indicates how the individual class match 
.1.3.6.1.4.1.4526.11.7.2.2.1.4,NETGEAR-QOS-DIFFSERV-PRIVATE-MIB::agentDiffServClassAclNum,Unsigned32,read-create,,current,,The access list number used to define the match conditions for the  DiffServ class. This attribute requires that the agentDiffServClassAclType object
.1.3.6.1.4.1.4526.11.7.2.2.1.5,NETGEAR-QOS-DIFFSERV-PRIVATE-MIB::agentDiffServClassRuleIndexNextFree,Unsigned32,read-only,,current,,This object contains an unused value for classRuleIndex, or a
.1.3.6.1.4.1.4526.11.7.2.2.1.6,NETGEAR-QOS-DIFFSERV-PRIVATE-MIB::agentDiffServClassStorageType,INTEGER,read-create,,current,other(1):volatile(2):nonVolatile(3):permanent(4):readOnly(5),Storage-type for this conceptual row
.1.3.6.1.4.1.4526.11.7.2.2.1.7,NETGEAR-QOS-DIFFSERV-PRIVATE-MIB::agentDiffServClassRowStatus,INTEGER,read-create,,current,active(1):notInService(2):notReady(3):createAndGo(4):createAndWait(5):destroy(6),The status of this conceptual row. Entries can not be deleted until all rows in  agentDiffServClassRuleTable with corresponding values of agentDiffServClassIndex  have been deleted.
.1.3.6.1.4.1.4526.11.7.2.2.1.8,NETGEAR-QOS-DIFFSERV-PRIVATE-MIB::agentDiffServClassAclType,INTEGER,read-create,,current,ip(1):mac(2):ipv6(3),The access list type used to define the match conditions for the  DiffServ class. This attribute is only valid if the value of  When this attribute is set to ip(1), the agentDiffServClassAclNum
.1.3.6.1.4.1.4526.11.7.2.2.1.9,NETGEAR-QOS-DIFFSERV-PRIVATE-MIB::agentDiffServClassProtoType,INTEGER,read-create,,current,ipv4(1):ipv6(2),The diffserv class protocol type used to indicate how to interpret any layer 3.  This attribute is only valid if the value of agentDiffServClassProtoType  is set to all(1) or any(2).
.1.3.6.1.4.1.4526.11.7.2.3,NETGEAR-QOS-DIFFSERV-PRIVATE-MIB::agentDiffServClassRuleTable,,not-accessible,,current,,A table of the DiffServ Class Rule entries
.1.3.6.1.4.1.4526.11.7.2.3.1,NETGEAR-QOS-DIFFSERV-PRIVATE-MIB::agentDiffServClassRuleEntry,,not-accessible,agentDiffServClassIndex:agentDiffServClassRuleIndex,current,,Represents entry for a set of class-match rules
.1.3.6.1.4.1.4526.11.7.2.3.1.1,NETGEAR-QOS-DIFFSERV-PRIVATE-MIB::agentDiffServClassRuleIndex,Unsigned32,not-accessible,,current,,The identifier for DiffServ Class Rule Table entry within a class
.1.3.6.1.4.1.4526.11.7.2.3.1.2,NETGEAR-QOS-DIFFSERV-PRIVATE-MIB::agentDiffServClassRuleMatchEntryType,INTEGER,read-create,,current,cos(1):dstip(2):dstl4port(3):dstmac(4):every(5):ipdscp(6):ipprecedence(7):iptos(8):protocol(9):refclass(10):srcip(11):srcl4port(12):srcmac(13):vlan(14):cos2(15):etype(16):vlanid(17):vlanid2(18):flowLabel(19):srcPrefix(20):dstPrefix(21),Class Rule match entry type, it determines which one of the individual  match conditions is defined for the present class rule. This object must be created before any other match object in this row.
.1.3.6.1.4.1.4526.11.7.2.3.1.3,NETGEAR-QOS-DIFFSERV-PRIVATE-MIB::agentDiffServClassRuleMatchCos,Unsigned32,read-create,,current,,Three-bit user priority field in the 802.1Q tag header of a tagged  agentDiffServClassRuleMatchEntryType is set to cos(1). For frames
.1.3.6.1.4.1.4526.11.7.2.3.1.4,NETGEAR-QOS-DIFFSERV-PRIVATE-MIB::agentDiffServClassRuleMatchDstIpAddr,IpAddress,read-create,,current,,Destination IP address match value for the class - only valid if the 
.1.3.6.1.4.1.4526.11.7.2.3.1.5,NETGEAR-QOS-DIFFSERV-PRIVATE-MIB::agentDiffServClassRuleMatchDstIpMask,IpAddress,read-create,,current,,Destination IP address mask match value for the class - only valid if the  compared against a packet. A non-contiguous mask value is permitted.
.1.3.6.1.4.1.4526.11.7.2.3.1.6,NETGEAR-QOS-DIFFSERV-PRIVATE-MIB::agentDiffServClassRuleMatchDstL4PortStart,Unsigned32,read-create,,current,,Destination layer 4 port range start match value for the class - only  valid if the agentDiffServClassRuleMatchEntryType is set to dstl4port(3).
.1.3.6.1.4.1.4526.11.7.2.3.1.7,NETGEAR-QOS-DIFFSERV-PRIVATE-MIB::agentDiffServClassRuleMatchDstL4PortEnd,Unsigned32,read-create,,current,,Destination layer 4 port range end match value for the class - only valid if the agentDiffServClassRuleMatchEntryType is set to dstl4port(3).
.1.3.6.1.4.1.4526.11.7.2.3.1.8,NETGEAR-QOS-DIFFSERV-PRIVATE-MIB::agentDiffServClassRuleMatchDstMacAddr,OCTET,read-create,,current,,Destination MAC address match value for the class - only valid if the 
.1.3.6.1.4.1.4526.11.7.2.3.1.9,NETGEAR-QOS-DIFFSERV-PRIVATE-MIB::agentDiffServClassRuleMatchDstMacMask,OCTET,read-create,,current,,Destination MAC address mask match value for the class - only valid if the  compared against a packet. A non-contiguous mask value is permitted.
.1.3.6.1.4.1.4526.11.7.2.3.1.10,NETGEAR-QOS-DIFFSERV-PRIVATE-MIB::agentDiffServClassRuleMatchEvery,INTEGER,read-only,,current,true(1):false(2),Flag to indicate that the class rule is defined to match on every packet,  regardless of content. - only valid if the  agentDiffServClassRuleMatchEntryType is set to every(5).
.1.3.6.1.4.1.4526.11.7.2.3.1.11,NETGEAR-QOS-DIFFSERV-PRIVATE-MIB::agentDiffServClassRuleMatchIpDscp,Unsigned32,read-create,,current,,IP DiffServ Code Point (DSCP) match value for the class - only valid if  the agentDiffServClassRuleMatchEntryType is set to ipdscp(6). The DSCP  IPv4 header.
.1.3.6.1.4.1.4526.11.7.2.3.1.12,NETGEAR-QOS-DIFFSERV-PRIVATE-MIB::agentDiffServClassRuleMatchIpPrecedence,Unsigned32,read-create,,current,,IP Precedence match value for the class - only valid if the 
.1.3.6.1.4.1.4526.11.7.2.3.1.13,NETGEAR-QOS-DIFFSERV-PRIVATE-MIB::agentDiffServClassRuleMatchIpTosBits,OCTET,read-create,,current,,IP TOS bits match value for the class - only valid if the 
.1.3.6.1.4.1.4526.11.7.2.3.1.14,NETGEAR-QOS-DIFFSERV-PRIVATE-MIB::agentDiffServClassRuleMatchIpTosMask,OCTET,read-create,,current,,IP TOS bits mask match value for the class - only valid if the 
.1.3.6.1.4.1.4526.11.7.2.3.1.15,NETGEAR-QOS-DIFFSERV-PRIVATE-MIB::agentDiffServClassRuleMatchProtocolNum,Unsigned32,read-create,,current,,Protocol number match value for the class - only valid if the 
.1.3.6.1.4.1.4526.11.7.2.3.1.16,NETGEAR-QOS-DIFFSERV-PRIVATE-MIB::agentDiffServClassRuleMatchRefClassIndex,Unsigned32,read-create,,current,,Index of the corresponding referenced class - only valid if the 
.1.3.6.1.4.1.4526.11.7.2.3.1.17,NETGEAR-QOS-DIFFSERV-PRIVATE-MIB::agentDiffServClassRuleMatchSrcIpAddr,IpAddress,read-create,,current,,Source IP address match value for the class - only valid if the 
.1.3.6.1.4.1.4526.11.7.2.3.1.18,NETGEAR-QOS-DIFFSERV-PRIVATE-MIB::agentDiffServClassRuleMatchSrcIpMask,IpAddress,read-create,,current,,Source IP address mask match value for the class - only valid if the 
.1.3.6.1.4.1.4526.11.7.2.3.1.19,NETGEAR-QOS-DIFFSERV-PRIVATE-MIB::agentDiffServClassRuleMatchSrcL4PortStart,Unsigned32,read-create,,current,,Source layer 4 port range start match value for the class - only valid if  the agentDiffServClassRuleMatchEntryType is set to srcl4port(12).
.1.3.6.1.4.1.4526.11.7.2.3.1.20,NETGEAR-QOS-DIFFSERV-PRIVATE-MIB::agentDiffServClassRuleMatchSrcL4PortEnd,Unsigned32,read-create,,current,,Source layer 4 port range end match value for the class - only valid if  the agentDiffServClassRuleMatchEntryType is set to srcl4port(12).
.1.3.6.1.4.1.4526.11.7.2.3.1.21,NETGEAR-QOS-DIFFSERV-PRIVATE-MIB::agentDiffServClassRuleMatchSrcMacAddr,OCTET,read-create,,current,,Source MAC address match value for the class - only valid if the 
.1.3.6.1.4.1.4526.11.7.2.3.1.22,NETGEAR-QOS-DIFFSERV-PRIVATE-MIB::agentDiffServClassRuleMatchSrcMacMask,OCTET,read-create,,current,,Source MAC address mask match value for the class - only valid if the 
.1.3.6.1.4.1.4526.11.7.2.3.1.23,NETGEAR-QOS-DIFFSERV-PRIVATE-MIB::agentDiffServClassRuleMatchVlanId,Unsigned32,read-create,,obsolete,,VLAN ID match value for the class - only valid if the 
.1.3.6.1.4.1.4526.11.7.2.3.1.24,NETGEAR-QOS-DIFFSERV-PRIVATE-MIB::agentDiffServClassRuleMatchExcludeFlag,INTEGER,read-create,,current,true(1):false(2),Class Rule exclude flag - when set to true(1), the match condition  identified by agentDiffServClassRuleMatchEntryType is negated. This means that for a given field, every value is considered to be a match EXCEPT for  the value specified in the class rule. This flag must be false(2) for an  agendDiffServClassRuleMatchEntryType of refClass(10). object, but before any other match object in this row
.1.3.6.1.4.1.4526.11.7.2.3.1.25,NETGEAR-QOS-DIFFSERV-PRIVATE-MIB::agentDiffServClassRuleStorageType,INTEGER,read-create,,current,other(1):volatile(2):nonVolatile(3):permanent(4):readOnly(5),Storage-type for this conceptual row
.1.3.6.1.4.1.4526.11.7.2.3.1.26,NETGEAR-QOS-DIFFSERV-PRIVATE-MIB::agentDiffServClassRuleRowStatus,INTEGER,read-create,,current,active(1):notInService(2):notReady(3):createAndGo(4):createAndWait(5):destroy(6),The status of this conceptual row.
.1.3.6.1.4.1.4526.11.7.2.3.1.27,NETGEAR-QOS-DIFFSERV-PRIVATE-MIB::agentDiffServClassRuleMatchCos2,Unsigned32,read-create,,current,,Three-bit user priority field in the second/inner 802.1Q tag header of a 
.1.3.6.1.4.1.4526.11.7.2.3.1.28,NETGEAR-QOS-DIFFSERV-PRIVATE-MIB::agentDiffServClassRuleMatchEtypeKey,INTEGER,read-create,,current,custom(1):appletalk(2):arp(3):ibmsna(4):ipv4(5):ipv6(6):ipx(7):mplsmcast(8):mplsucast(9):netbios(10):novell(11):pppoe(12):rarp(13),Ethertype keyword match value for the class - only valid if the 
.1.3.6.1.4.1.4526.11.7.2.3.1.29,NETGEAR-QOS-DIFFSERV-PRIVATE-MIB::agentDiffServClassRuleMatchEtypeValue,Unsigned32,read-create,,current,,Ethertype match value for the class - only valid if the 
.1.3.6.1.4.1.4526.11.7.2.3.1.30,NETGEAR-QOS-DIFFSERV-PRIVATE-MIB::agentDiffServClassRuleMatchVlanIdStart,Unsigned32,read-create,,current,,VLAN ID range start match value for the class - only valid if The VLAN ID field is defined as the 12-bit VLAN identifier in the 802.1Q tag header of a tagged Ethernet frame. This is 
.1.3.6.1.4.1.4526.11.7.2.3.1.31,NETGEAR-QOS-DIFFSERV-PRIVATE-MIB::agentDiffServClassRuleMatchVlanIdEnd,Unsigned32,read-create,,current,,VLAN ID range end match value for the class - only valid if  The VLAN ID field is defined as the 12-bit VLAN identifier in the 802.1Q tag header of a tagged Ethernet frame. This is 
.1.3.6.1.4.1.4526.11.7.2.3.1.32,NETGEAR-QOS-DIFFSERV-PRIVATE-MIB::agentDiffServClassRuleMatchVlanId2Start,Unsigned32,read-create,,current,,Secondary VLAN ID range start match value for the class - only valid if the  The Secondary VLAN ID field is defined as the 12-bit VLAN identifier in the second/inner 802.1Q tag header of a double VLAN tagged Ethernet  frame.
.1.3.6.1.4.1.4526.11.7.2.3.1.33,NETGEAR-QOS-DIFFSERV-PRIVATE-MIB::agentDiffServClassRuleMatchVlanId2End,Unsigned32,read-create,,current,,Secondary VLAN ID range end match value for the class - only valid if the  The Secondary VLAN ID field is defined as the 12-bit VLAN identifier in the second/inner 802.1Q tag header of a double VLAN tagged Ethernet  frame.
.1.3.6.1.4.1.4526.11.7.2.3.1.34,NETGEAR-QOS-DIFFSERV-PRIVATE-MIB::agentDiffServClassRuleMatchFlowLabel,Unsigned32,read-create,,current,,Flow label is 20-bit number that is unique to an IPv6 packet, used by end  stations to signify quality-of-service handling in routers.
.1.3.6.1.4.1.4526.11.7.2.3.1.35,NETGEAR-QOS-DIFFSERV-PRIVATE-MIB::agentDiffServClassRuleMatchDstIpv6Prefix,OCTET,read-write,,current,,The Ipv6 Prefix Address configured on the Service Port.
.1.3.6.1.4.1.4526.11.7.2.3.1.36,NETGEAR-QOS-DIFFSERV-PRIVATE-MIB::agentDiffServClassRuleMatchSrcIpv6Prefix,OCTET,read-write,,current,,The Ipv6 Prefix Address configured on the Service Port.
.1.3.6.1.4.1.4526.11.7.2.3.1.37,NETGEAR-QOS-DIFFSERV-PRIVATE-MIB::agentDiffServClassRuleMatchDstIpv6PrefixLength,Integer32,read-create,,current,,The Prefix Length.
.1.3.6.1.4.1.4526.11.7.2.3.1.38,NETGEAR-QOS-DIFFSERV-PRIVATE-MIB::agentDiffServClassRuleMatchSrcIpv6PrefixLength,Integer32,read-create,,current,,The Prefix Length.
.1.3.6.1.4.1.4526.11.7.3,NETGEAR-QOS-DIFFSERV-PRIVATE-MIB::agentDiffServPolicyGroup,,,,,,
.1.3.6.1.4.1.4526.11.7.3.1,NETGEAR-QOS-DIFFSERV-PRIVATE-MIB::agentDiffServPolicyIndexNextFree,Unsigned32,read-only,,current,,This object contains an unused value for agentDiffServPolicyIndex, or a
.1.3.6.1.4.1.4526.11.7.3.2,NETGEAR-QOS-DIFFSERV-PRIVATE-MIB::agentDiffServPolicyTable,,not-accessible,,current,,A table of the DiffServ policy entries.
.1.3.6.1.4.1.4526.11.7.3.2.1,NETGEAR-QOS-DIFFSERV-PRIVATE-MIB::agentDiffServPolicyEntry,,not-accessible,agentDiffServPolicyIndex,current,,Represents entry for a DiffServ policy.
.1.3.6.1.4.1.4526.11.7.3.2.1.1,NETGEAR-QOS-DIFFSERV-PRIVATE-MIB::agentDiffServPolicyIndex,Unsigned32,not-accessible,,current,,The identifier for DiffServ Policy table entry.
.1.3.6.1.4.1.4526.11.7.3.2.1.2,NETGEAR-QOS-DIFFSERV-PRIVATE-MIB::agentDiffServPolicyName,OCTET,read-create,,current,,Name of the policy
.1.3.6.1.4.1.4526.11.7.3.2.1.3,NETGEAR-QOS-DIFFSERV-PRIVATE-MIB::agentDiffServPolicyType,INTEGER,read-create,,current,in(1):out(2), The policy type dictates whether inbound or outbound policy attribute statements are used in the policy definition.
.1.3.6.1.4.1.4526.11.7.3.2.1.4,NETGEAR-QOS-DIFFSERV-PRIVATE-MIB::agentDiffServPolicyInstIndexNextFree,Unsigned32,read-only,,current,,This object contains an unused value for agentDiffServPolicyInstIndex, or  a zero to indicate that none exists. This index is maintained on a  per-policy basis.
.1.3.6.1.4.1.4526.11.7.3.2.1.5,NETGEAR-QOS-DIFFSERV-PRIVATE-MIB::agentDiffServPolicyStorageType,INTEGER,read-create,,current,other(1):volatile(2):nonVolatile(3):permanent(4):readOnly(5),Storage-type for this conceptual row
.1.3.6.1.4.1.4526.11.7.3.2.1.6,NETGEAR-QOS-DIFFSERV-PRIVATE-MIB::agentDiffServPolicyRowStatus,INTEGER,read-create,,current,active(1):notInService(2):notReady(3):createAndGo(4):createAndWait(5):destroy(6),The status of this conceptual row. Entries can not be deleted until all rows in  agentDiffServPolicyInstTable with corresponding values of agentDiffServPolicyIndex  have been deleted.
.1.3.6.1.4.1.4526.11.7.3.3,NETGEAR-QOS-DIFFSERV-PRIVATE-MIB::agentDiffServPolicyInstTable,,not-accessible,,current,,A table of the policy-class instance entries.
.1.3.6.1.4.1.4526.11.7.3.3.1,NETGEAR-QOS-DIFFSERV-PRIVATE-MIB::agentDiffServPolicyInstEntry,,not-accessible,agentDiffServPolicyIndex:agentDiffServPolicyInstIndex,current,,Represents entry for a policy-class instance.
.1.3.6.1.4.1.4526.11.7.3.3.1.1,NETGEAR-QOS-DIFFSERV-PRIVATE-MIB::agentDiffServPolicyInstIndex,Unsigned32,not-accessible,,current,,The identifier for policy-class Instance table entry within a policy.
.1.3.6.1.4.1.4526.11.7.3.3.1.2,NETGEAR-QOS-DIFFSERV-PRIVATE-MIB::agentDiffServPolicyInstClassIndex,Unsigned32,read-create,,current,,Index of the DiffServ Class Table row, whose class definition is used class (instance) to a policy.
.1.3.6.1.4.1.4526.11.7.3.3.1.3,NETGEAR-QOS-DIFFSERV-PRIVATE-MIB::agentDiffServPolicyInstAttrIndexNextFree,Unsigned32,read-only,,current,,This object contains an unused value for agentDiffServPolicyAttrIndex, or  a zero to indicate that none exists. This index is maintained on a  per-policy-class-instance basis.
.1.3.6.1.4.1.4526.11.7.3.3.1.4,NETGEAR-QOS-DIFFSERV-PRIVATE-MIB::agentDiffServPolicyInstStorageType,INTEGER,read-create,,current,other(1):volatile(2):nonVolatile(3):permanent(4):readOnly(5),Storage-type for this conceptual row.
.1.3.6.1.4.1.4526.11.7.3.3.1.5,NETGEAR-QOS-DIFFSERV-PRIVATE-MIB::agentDiffServPolicyInstRowStatus,INTEGER,read-create,,current,active(1):notInService(2):notReady(3):createAndGo(4):createAndWait(5):destroy(6),The status of this conceptual row. Entries can not be deleted until all rows in  agentDiffServPolicyAttrTable with corresponding values of agentDiffServPolicyIndex and agentDiffServPolicyInstIndex have been deleted.
.1.3.6.1.4.1.4526.11.7.3.4,NETGEAR-QOS-DIFFSERV-PRIVATE-MIB::agentDiffServPolicyAttrTable,,not-accessible,,current,,A table of policy attribute entries
.1.3.6.1.4.1.4526.11.7.3.4.1,NETGEAR-QOS-DIFFSERV-PRIVATE-MIB::agentDiffServPolicyAttrEntry,,not-accessible,agentDiffServPolicyIndex:agentDiffServPolicyInstIndex:agentDiffServPolicyAttrIndex,current,,Represents entry for policy attributes
.1.3.6.1.4.1.4526.11.7.3.4.1.1,NETGEAR-QOS-DIFFSERV-PRIVATE-MIB::agentDiffServPolicyAttrIndex,Unsigned32,not-accessible,,current,,The identifier for policy-attribute entry 
.1.3.6.1.4.1.4526.11.7.3.4.1.2,NETGEAR-QOS-DIFFSERV-PRIVATE-MIB::agentDiffServPolicyAttrStmtEntryType,INTEGER,read-create,,current,bandwidth(1):expedite(2):markCosVal(3):markIpDscpVal(4):markIpPrecedenceVal(5):policeSimple(6):policeSinglerate(7):policeTworate(8):randomdrop(9):shapeAverage(10):shapePeak(11):assignQueue(12):drop(13):markCos2Val(14):redirect(15):mirror(16),Policy attribute statement entry type -- this entry type is  created before any other policy attribute statement object in the row. The markIpDscpVal(4), markIpPrecedenceVal(5), policeSimple(6),  policeSinglerate(7) and policeTworate(8) values are only allowed for an  agentDiffServPolicyType of in(1). The remaining values are only allowed  for an agentDiffServPolicyType of out(2).
.1.3.6.1.4.1.4526.11.7.3.4.1.3,NETGEAR-QOS-DIFFSERV-PRIVATE-MIB::agentDiffServPolicyAttrStmtBandwidthCrate,Unsigned32,read-create,,current,,Bandwidth committed rate attribute statement value -- identifies 
.1.3.6.1.4.1.4526.11.7.3.4.1.4,NETGEAR-QOS-DIFFSERV-PRIVATE-MIB::agentDiffServPolicyAttrStmtBandwidthCrateUnits,INTEGER,read-create,,current,kbps(1):percentage(2),Bandwidth committed rate units attribute statement value -- this value  agentDiffServPolicyAttrStmtBandwidthCrate object as either  kilobits-per-second or as a percentage of interface link speed. This  attribute is only valid if the value of  agentDiffServPolicyAttrStmtEntryType is set to bandwidth(1).
.1.3.6.1.4.1.4526.11.7.3.4.1.5,NETGEAR-QOS-DIFFSERV-PRIVATE-MIB::agentDiffServPolicyAttrStmtExpediteCrate,Unsigned32,read-create,,current,,Expedited (bandwidth) committed rate attribute statement value -- it  identifies the maximum guaranteed amount of bandwidth to be reserved for  the specified class instance within the policy. This attribute is only  valid if the value of agentDiffServPolicyAttrStmtEntryType is set to  expedite(2). 
.1.3.6.1.4.1.4526.11.7.3.4.1.6,NETGEAR-QOS-DIFFSERV-PRIVATE-MIB::agentDiffServPolicyAttrStmtExpediteCrateUnits,INTEGER,read-create,,current,kbps(1):percentage(2),Expedited (bandwidth) committed rate units attribute statement value  agentDiffServPolicyAttrStmtExpediteCrate object as either  kilobits-per-second or as a percentage of interface link speed. This  attribute is only valid if the value of  agentDiffServPolicyAttrStmtEntryType is set to expedite(2).
.1.3.6.1.4.1.4526.11.7.3.4.1.7,NETGEAR-QOS-DIFFSERV-PRIVATE-MIB::agentDiffServPolicyAttrStmtExpediteCburst,Unsigned32,read-create,,current,,Expedited (bandwidth) committed burst size attribute statement value, 
.1.3.6.1.4.1.4526.11.7.3.4.1.8,NETGEAR-QOS-DIFFSERV-PRIVATE-MIB::agentDiffServPolicyAttrStmtMarkCosVal,Unsigned32,read-create,,current,,Three-bit user priority field value in the 802.1Q tag header of a tagged  For frames containing a double VLAN tag, this field is located in the  agentDiffServPolicyAttrStmtEntryType is set to markCosVal(3).
.1.3.6.1.4.1.4526.11.7.3.4.1.9,NETGEAR-QOS-DIFFSERV-PRIVATE-MIB::agentDiffServPolicyAttrStmtMarkIpDscpVal,Unsigned32,read-create,,current,,Specified IP DSCP value to mark in all inbound packets belonging to the  class-instance. This attribute is only valid if the value of  agentDiffServPolicyAttrStmtEntryType is set to markIpDscpVal(4).
.1.3.6.1.4.1.4526.11.7.3.4.1.10,NETGEAR-QOS-DIFFSERV-PRIVATE-MIB::agentDiffServPolicyAttrStmtMarkIpPrecedenceVal,Unsigned32,read-create,,current,,Specified IP Precedence value to mark in all inbound packets belonging to  the class-instance. This attribute is only valid if the value of  agentDiffServPolicyAttrStmtEntryType is set to markIpPrecedenceVal(5).
.1.3.6.1.4.1.4526.11.7.3.4.1.11,NETGEAR-QOS-DIFFSERV-PRIVATE-MIB::agentDiffServPolicyAttrStmtPoliceConformAct,INTEGER,read-create,,current,drop(1):markdscp(2):markprec(3):send(4):markcos(5):markcos2(6),Policing conform action attribute statement value -- determines  agentDiffServPolicyAttrStmtEntryType is policeSimple(6),  policeSinglerate(7), or policeTworate(8).
.1.3.6.1.4.1.4526.11.7.3.4.1.12,NETGEAR-QOS-DIFFSERV-PRIVATE-MIB::agentDiffServPolicyAttrStmtPoliceConformVal,Unsigned32,read-create,,current,,Policing conform value attribute statement --  used to mark conforming packets when the conform action This attribute is only valid if the value of  agentDiffServPolicyAttrStmtEntryType is policeSimple(6),  policeSinglerate(7), or policeTworate(8).
.1.3.6.1.4.1.4526.11.7.3.4.1.13,NETGEAR-QOS-DIFFSERV-PRIVATE-MIB::agentDiffServPolicyAttrStmtPoliceExceedAct,INTEGER,read-create,,current,drop(1):markdscp(2):markprec(3):send(4):markcos(5):markcos2(6),Policing exceed action attribute statement value -- determines  tworate) currently configured for the specified class instance within the  policy. The default exceed action is drop(1). This attribute is only  valid if the value of agentDiffServPolicyAttrStmtEntryType is  policeSinglerate(7) or policeTworate(8).
.1.3.6.1.4.1.4526.11.7.3.4.1.14,NETGEAR-QOS-DIFFSERV-PRIVATE-MIB::agentDiffServPolicyAttrStmtPoliceExceedVal,Unsigned32,read-create,,current,,Policing exceed value attribute statement --  used to mark excess packets when the exceed action This is only valid if the value of agentDiffServPolicyAttrStmtEntryType is  policeSinglerate(7) or policeTworate(8).
.1.3.6.1.4.1.4526.11.7.3.4.1.15,NETGEAR-QOS-DIFFSERV-PRIVATE-MIB::agentDiffServPolicyAttrStmtPoliceNonconformAct,INTEGER,read-create,,current,drop(1):markdscp(2):markprec(3):send(4):markcos(5):markcos2(6),Policing non-conform action attribute statement value -- determines the  action taken on nonconforming traffic for the policing style (simple,  singlerate,tworate) currently configured for the specified class instance  attribute is only valid if the value of  agentDiffServPolicyAttrStmtEntryType is policeSimple(6),  policeSinglerate(7), or policeTworate(8).
.1.3.6.1.4.1.4526.11.7.3.4.1.16,NETGEAR-QOS-DIFFSERV-PRIVATE-MIB::agentDiffServPolicyAttrStmtPoliceNonconformVal,Unsigned32,read-create,,current,,Policing non-conform value attribute statement --  used to mark nonconforming packets when the nonconform action This attribute is only valid if the value of  agentDiffServPolicyAttrStmtEntryType is policeSimple(6),  policeSinglerate(7), or policeTworate(8).
.1.3.6.1.4.1.4526.11.7.3.4.1.17,NETGEAR-QOS-DIFFSERV-PRIVATE-MIB::agentDiffServPolicyAttrStmtPoliceSimpleCrate,Unsigned32,read-create,,current,,Simple policing committed rate attribute statement value, specified in  kbps. This attribute is only valid if the value of  agentDiffServPolicyAttrStmtEntryType is set to policeSimple(6).
.1.3.6.1.4.1.4526.11.7.3.4.1.18,NETGEAR-QOS-DIFFSERV-PRIVATE-MIB::agentDiffServPolicyAttrStmtPoliceSimpleCburst,Unsigned32,read-create,,current,,Simple policing committed burst size attribute statement value, specified  in Kbytes. This attribute is only valid if the value of  agentDiffServPolicyAttrStmtEntryType is set to policeSimple(6).
.1.3.6.1.4.1.4526.11.7.3.4.1.19,NETGEAR-QOS-DIFFSERV-PRIVATE-MIB::agentDiffServPolicyAttrStmtPoliceSinglerateCrate,Unsigned32,read-create,,current,,Single-rate policing committed rate attribute statement value, specified  in kbps. This attribute is only valid if the value of  agentDiffServPolicyAttrStmtEntryType is set to policeSinglerate(7).
.1.3.6.1.4.1.4526.11.7.3.4.1.20,NETGEAR-QOS-DIFFSERV-PRIVATE-MIB::agentDiffServPolicyAttrStmtPoliceSinglerateCburst,Unsigned32,read-create,,current,,Single-rate policing committed burst size attribute statement value,  specified in Kbytes. This attribute is only valid if the value of  agentDiffServPolicyAttrStmtEntryType is set to policeSinglerate(7).
.1.3.6.1.4.1.4526.11.7.3.4.1.21,NETGEAR-QOS-DIFFSERV-PRIVATE-MIB::agentDiffServPolicyAttrStmtPoliceSinglerateEburst,Unsigned32,read-create,,current,,Single-rate policing excess burst size attribute statement value,  specified in Kbytes. This attribute is only valid if the value of  agentDiffServPolicyAttrStmtEntryType is set to policeSinglerate(7).
.1.3.6.1.4.1.4526.11.7.3.4.1.22,NETGEAR-QOS-DIFFSERV-PRIVATE-MIB::agentDiffServPolicyAttrStmtPoliceTworateCrate,Unsigned32,read-create,,current,,Two-rate policing committed rate attribute statement value, specified in  kbps. This attribute is only valid if the value of  agentDiffServPolicyAttrStmtEntryType is set to policeTworate(8).
.1.3.6.1.4.1.4526.11.7.3.4.1.23,NETGEAR-QOS-DIFFSERV-PRIVATE-MIB::agentDiffServPolicyAttrStmtPoliceTworateCburst,Unsigned32,read-create,,current,,Two-rate policing committed burst size attribute statement value,  specified in Kbytes. This attribute is only valid if the value of  agentDiffServPolicyAttrStmtEntryType is set to policeTworate(8).
.1.3.6.1.4.1.4526.11.7.3.4.1.24,NETGEAR-QOS-DIFFSERV-PRIVATE-MIB::agentDiffServPolicyAttrStmtPoliceTworatePrate,Unsigned32,read-create,,current,,Two-rate policing peak rate attribute statement value, specified in kbps. agentDiffServPolicyAttrStmtEntryType is set to policeTworate(8).
.1.3.6.1.4.1.4526.11.7.3.4.1.25,NETGEAR-QOS-DIFFSERV-PRIVATE-MIB::agentDiffServPolicyAttrStmtPoliceTworatePburst,Unsigned32,read-create,,current,,Two-rate policing peak burst size attribute statement value, specified in  Kbytes. This attribute is only valid if the value of  agentDiffServPolicyAttrStmtEntryType is set to policeTworate(8).
.1.3.6.1.4.1.4526.11.7.3.4.1.26,NETGEAR-QOS-DIFFSERV-PRIVATE-MIB::agentDiffServPolicyAttrStmtRandomdropMinThresh,Unsigned32,read-create,,current,,Random drop minimum threshold attribute statement value -- the average  queue depth minimum threshold in bytes used by the WRED algorithm. This  attribute is only valid if the value of  agentDiffServPolicyAttrStmtEntryType is set to randomdrop(9).
.1.3.6.1.4.1.4526.11.7.3.4.1.27,NETGEAR-QOS-DIFFSERV-PRIVATE-MIB::agentDiffServPolicyAttrStmtRandomdropMaxThresh,Unsigned32,read-create,,current,,Random drop maximum threshold attribute statement value -- the average  queue depth maximum threshold in bytes used by the WRED algorithm. This  attribute is only valid if the value of  agentDiffServPolicyAttrStmtEntryType is set to randomdrop(9).
.1.3.6.1.4.1.4526.11.7.3.4.1.28,NETGEAR-QOS-DIFFSERV-PRIVATE-MIB::agentDiffServPolicyAttrStmtRandomdropMaxDropProb,Unsigned32,read-create,,current,,Random drop maximum drop probability attribute statement value -- the  packet drop probability when the queue depth average reaches its maximum  threshold. It is expressed as a percentage, and is an integer from 0 to  100. This attribute is only valid if the value of  agentDiffServPolicyAttrStmtEntryType is set to randomdrop(9).
.1.3.6.1.4.1.4526.11.7.3.4.1.29,NETGEAR-QOS-DIFFSERV-PRIVATE-MIB::agentDiffServPolicyAttrStmtRandomdropSamplingRate,Unsigned32,read-create,,current,,Random drop sampling rate attribute statement value -- the period at which  the queue depth is sampled for computing an average, expressed in  microseconds. This value is an integer from 0 to 1000000, with a default  value of 0 (meaning per packet sampling). This attribute is only valid if  the value of agentDiffServPolicyAttrStmtEntryType is set to randomdrop(9).
.1.3.6.1.4.1.4526.11.7.3.4.1.30,NETGEAR-QOS-DIFFSERV-PRIVATE-MIB::agentDiffServPolicyAttrStmtRandomdropDecayExponent,Unsigned32,read-create,,current,,Random drop decay exponent attribute statement value -- determines how
.1.3.6.1.4.1.4526.11.7.3.4.1.31,NETGEAR-QOS-DIFFSERV-PRIVATE-MIB::agentDiffServPolicyAttrStmtShapeAverageCrate,Unsigned32,read-create,,current,,Average-rate shaping committed rate attribute statement value, specified  in kbps -- used to establish average rate traffic shaping for the  specified class , which limits transmissions for the class to the  committed information rate, with any excess traffic delayed via queueing.  This attribute is only valid if the value of  agentDiffServPolicyAttrStmtEntryType is set to shapeAverage(10).
.1.3.6.1.4.1.4526.11.7.3.4.1.32,NETGEAR-QOS-DIFFSERV-PRIVATE-MIB::agentDiffServPolicyAttrStmtShapePeakCrate,Unsigned32,read-create,,current,,Peak-rate shaping committed rate attribute statement value, specified in  kbps -- used to establish peak rate traffic shaping for the specified  class , which allows transmissions for the class to exceed the committed  information rate by sending excess traffic with the understanding that it  could be dropped by a downstream network element. This attribute is only  valid if the value of agentDiffServPolicyAttrStmtEntryType is set to  shapePeak(11).
.1.3.6.1.4.1.4526.11.7.3.4.1.33,NETGEAR-QOS-DIFFSERV-PRIVATE-MIB::agentDiffServPolicyAttrStmtShapePeakPrate,Unsigned32,read-create,,current,,Peak-rate shaping peak rate attribute statement value, specified in kbps which allows transmissions for the class to exceed the committed  information rate by sending excess traffic with the understanding that it  could be dropped by a downstream network element. This attribute is only  valid if the value of agentDiffServPolicyAttrStmtEntryType is set to  shapePeak(11).
.1.3.6.1.4.1.4526.11.7.3.4.1.34,NETGEAR-QOS-DIFFSERV-PRIVATE-MIB::agentDiffServPolicyAttrStorageType,INTEGER,read-create,,current,other(1):volatile(2):nonVolatile(3):permanent(4):readOnly(5),Storage-type for this conceptual row.
.1.3.6.1.4.1.4526.11.7.3.4.1.35,NETGEAR-QOS-DIFFSERV-PRIVATE-MIB::agentDiffServPolicyAttrRowStatus,INTEGER,read-create,,current,active(1):notInService(2):notReady(3):createAndGo(4):createAndWait(5):destroy(6),The status of this conceptual row.
.1.3.6.1.4.1.4526.11.7.3.4.1.36,NETGEAR-QOS-DIFFSERV-PRIVATE-MIB::agentDiffServPolicyAttrStmtAssignQueueId,Unsigned32,read-create,,current,,Queue identifier to which all inbound packets belonging to this 
.1.3.6.1.4.1.4526.11.7.3.4.1.37,NETGEAR-QOS-DIFFSERV-PRIVATE-MIB::agentDiffServPolicyAttrStmtDrop,INTEGER,read-only,,current,true(1):false(2),Flag to indicate that all inbound packets belonging to this  class-instance are dropped at ingress. This attribute is 
.1.3.6.1.4.1.4526.11.7.3.4.1.38,NETGEAR-QOS-DIFFSERV-PRIVATE-MIB::agentDiffServPolicyAttrStmtMarkCos2Val,Unsigned32,read-create,,current,,Three-bit user priority field value in the second/inner 802.1Q tag header of  agentDiffServPolicyAttrStmtEntryType is set to markCos2Val(14).
.1.3.6.1.4.1.4526.11.7.3.4.1.39,NETGEAR-QOS-DIFFSERV-PRIVATE-MIB::agentDiffServPolicyAttrStmtPoliceColorConformIndex,Unsigned32,read-create,,current,,Index of the DiffServ Class Table row whose class definition is used incoming traffic categorized as 'green' packets in the agentDiffServPolicyAttrStmtEntryType is policeSimple(6),  policeSinglerate(7), or policeTworate(8). The DiffServ class referred to by this object must comply with 3) The color conform mode and value identified by this class index must 
.1.3.6.1.4.1.4526.11.7.3.4.1.40,NETGEAR-QOS-DIFFSERV-PRIVATE-MIB::agentDiffServPolicyAttrStmtPoliceColorConformMode,INTEGER,read-only,,current,blind(1):cos(2):cos2(3):ipdscp(4):ipprec(5),Policing color conform mode -- indicates the color awareness This read-only object reflects the DiffServ class definition as indicated by
.1.3.6.1.4.1.4526.11.7.3.4.1.41,NETGEAR-QOS-DIFFSERV-PRIVATE-MIB::agentDiffServPolicyAttrStmtPoliceColorConformVal,Unsigned32,read-only,,current,,Policing color conform value -- indicates the color awareness For the color conform field indicated by  this value are considered to be colored 'green'. This read-only object reflects the DiffServ class definition as indicated by
.1.3.6.1.4.1.4526.11.7.3.4.1.42,NETGEAR-QOS-DIFFSERV-PRIVATE-MIB::agentDiffServPolicyAttrStmtPoliceColorExceedIndex,Unsigned32,read-create,,current,,Index of the DiffServ Class Table row whose class definition is used incoming traffic categorized as 'yellow' packets in the  agentDiffServPolicyAttrStmtEntryType is policeSinglerate(7) or  The DiffServ class referred to by this object must comply with 3) The color exceed mode and value identified by this class index must 
.1.3.6.1.4.1.4526.11.7.3.4.1.43,NETGEAR-QOS-DIFFSERV-PRIVATE-MIB::agentDiffServPolicyAttrStmtPoliceColorExceedMode,INTEGER,read-only,,current,blind(1):cos(2):cos2(3):ipdscp(4):ipprec(5):unused(6),Policing color exceed mode -- indicates the color awareness This read-only object reflects the DiffServ class definition as indicated by
.1.3.6.1.4.1.4526.11.7.3.4.1.44,NETGEAR-QOS-DIFFSERV-PRIVATE-MIB::agentDiffServPolicyAttrStmtPoliceColorExceedVal,Unsigned32,read-only,,current,,Policing color exceed value -- indicates the color awareness For the color exceed field indicated by  this value are considered to be colored 'yellow'. This read-only object reflects the DiffServ class definition as indicated by
.1.3.6.1.4.1.4526.11.7.3.4.1.45,NETGEAR-QOS-DIFFSERV-PRIVATE-MIB::agentDiffServPolicyAttrStmtRedirectIntf,Integer32,read-create,,current,,External interface number to which all inbound packets belonging to this 
.1.3.6.1.4.1.4526.11.7.3.4.1.46,NETGEAR-QOS-DIFFSERV-PRIVATE-MIB::agentDiffServPolicyAttrStmtMirrorIntf,Integer32,read-create,,current,,External interface number to which all inbound packets belonging to this class-instance are mirrored. This attribute is only valid if the value of agentDiffServPolicyAttrStmtEntryType is set to mirror(16).
.1.3.6.1.4.1.4526.11.7.3.5,NETGEAR-QOS-DIFFSERV-PRIVATE-MIB::agentDiffServPolicyPerfInTable,,not-accessible,,current,,A table of inbound policy-class performance entries
.1.3.6.1.4.1.4526.11.7.3.5.1,NETGEAR-QOS-DIFFSERV-PRIVATE-MIB::agentDiffServPolicyPerfInEntry,,not-accessible,agentDiffServPolicyIndex:agentDiffServPolicyInstIndex:ifIndex,current,,Represents entry for the performance attributes of the associated inbound 
.1.3.6.1.4.1.4526.11.7.3.5.1.1,NETGEAR-QOS-DIFFSERV-PRIVATE-MIB::agentDiffServPolicyPerfInOfferedOctets,Counter32,read-only,,current,,Offered octets count for the inbound policy-class instance performance  entry.
.1.3.6.1.4.1.4526.11.7.3.5.1.2,NETGEAR-QOS-DIFFSERV-PRIVATE-MIB::agentDiffServPolicyPerfInOfferedPackets,Counter32,read-only,,current,,Offered packets count for the inbound policy-class instance performance  entry.
.1.3.6.1.4.1.4526.11.7.3.5.1.3,NETGEAR-QOS-DIFFSERV-PRIVATE-MIB::agentDiffServPolicyPerfInDiscardedOctets,Counter32,read-only,,current,,Discarded octets count for the inbound policy-class instance performance  entry.
.1.3.6.1.4.1.4526.11.7.3.5.1.4,NETGEAR-QOS-DIFFSERV-PRIVATE-MIB::agentDiffServPolicyPerfInDiscardedPackets,Counter32,read-only,,current,,Discarded packets count for the inbound policy-class instance performance  entry.
.1.3.6.1.4.1.4526.11.7.3.5.1.5,NETGEAR-QOS-DIFFSERV-PRIVATE-MIB::agentDiffServPolicyPerfInHCOfferedOctets,Counter64,read-only,,current,,Offered octets high capacity count for the inbound policy-class instance  performance entry.
.1.3.6.1.4.1.4526.11.7.3.5.1.6,NETGEAR-QOS-DIFFSERV-PRIVATE-MIB::agentDiffServPolicyPerfInHCOfferedPackets,Counter64,read-only,,current,,Offered packets high capacity count for the inbound policy-class instance  performance entry.
.1.3.6.1.4.1.4526.11.7.3.5.1.7,NETGEAR-QOS-DIFFSERV-PRIVATE-MIB::agentDiffServPolicyPerfInHCDiscardedOctets,Counter64,read-only,,current,,Discarded octets high capacity count for the inbound policy-class instance  performance entry.
.1.3.6.1.4.1.4526.11.7.3.5.1.8,NETGEAR-QOS-DIFFSERV-PRIVATE-MIB::agentDiffServPolicyPerfInHCDiscardedPackets,Counter64,read-only,,current,,Discarded packets high capacity count for the inbound policy-class  instance performance entry.
.1.3.6.1.4.1.4526.11.7.3.5.1.9,NETGEAR-QOS-DIFFSERV-PRIVATE-MIB::agentDiffServPolicyPerfInStorageType,INTEGER,read-only,,current,other(1):volatile(2):nonVolatile(3):permanent(4):readOnly(5),Storage-type for this conceptual row.
.1.3.6.1.4.1.4526.11.7.3.5.1.10,NETGEAR-QOS-DIFFSERV-PRIVATE-MIB::agentDiffServPolicyPerfInRowStatus,INTEGER,read-only,,current,active(1):notInService(2):notReady(3):createAndGo(4):createAndWait(5):destroy(6),The status of this conceptual row.
.1.3.6.1.4.1.4526.11.7.3.6,NETGEAR-QOS-DIFFSERV-PRIVATE-MIB::agentDiffServPolicyPerfOutTable,,not-accessible,,current,,A table of outbound policy-class performance entries
.1.3.6.1.4.1.4526.11.7.3.6.1,NETGEAR-QOS-DIFFSERV-PRIVATE-MIB::agentDiffServPolicyPerfOutEntry,,not-accessible,agentDiffServPolicyIndex:agentDiffServPolicyInstIndex:ifIndex,current,,Represents entry for the performance attributes of the associated outbound 
.1.3.6.1.4.1.4526.11.7.3.6.1.1,NETGEAR-QOS-DIFFSERV-PRIVATE-MIB::agentDiffServPolicyPerfOutTailDroppedOctets,Counter32,read-only,,current,,Tail-dropped octets count for the outbound policy-class instance  performance entry.
.1.3.6.1.4.1.4526.11.7.3.6.1.2,NETGEAR-QOS-DIFFSERV-PRIVATE-MIB::agentDiffServPolicyPerfOutTailDroppedPackets,Counter32,read-only,,current,,Tail-dropped packets count for the outbound policy-class instance  performance entry.
.1.3.6.1.4.1.4526.11.7.3.6.1.3,NETGEAR-QOS-DIFFSERV-PRIVATE-MIB::agentDiffServPolicyPerfOutRandomDroppedOctets,Counter32,read-only,,current,,Random-dropped octets count for the outbound policy-class instance  performance entry.
.1.3.6.1.4.1.4526.11.7.3.6.1.4,NETGEAR-QOS-DIFFSERV-PRIVATE-MIB::agentDiffServPolicyPerfOutRandomDroppedPackets,Counter32,read-only,,current,,Random-dropped packets count for the outbound policy-class instance  performance entry.
.1.3.6.1.4.1.4526.11.7.3.6.1.5,NETGEAR-QOS-DIFFSERV-PRIVATE-MIB::agentDiffServPolicyPerfOutShapeDelayedOctets,Counter32,read-only,,current,,Shape-delayed octets count for the outbound policy-class instance  performance entry.
.1.3.6.1.4.1.4526.11.7.3.6.1.6,NETGEAR-QOS-DIFFSERV-PRIVATE-MIB::agentDiffServPolicyPerfOutShapeDelayedPackets,Counter32,read-only,,current,,Shape-delayed packets count for the outbound policy-class instance  performance entry.
.1.3.6.1.4.1.4526.11.7.3.6.1.7,NETGEAR-QOS-DIFFSERV-PRIVATE-MIB::agentDiffServPolicyPerfOutSentOctets,Counter32,read-only,,current,,Sent octets count for the outbound policy-class instance performance  entry.
.1.3.6.1.4.1.4526.11.7.3.6.1.8,NETGEAR-QOS-DIFFSERV-PRIVATE-MIB::agentDiffServPolicyPerfOutSentPackets,Counter32,read-only,,current,,Sent packets count for the outbound policy-class instance performance  entry.
.1.3.6.1.4.1.4526.11.7.3.6.1.9,NETGEAR-QOS-DIFFSERV-PRIVATE-MIB::agentDiffServPolicyPerfOutHCTailDroppedOctets,Counter64,read-only,,current,,Tail-dropped octets high capacity count for the outbound policy-class  instance performance entry.
.1.3.6.1.4.1.4526.11.7.3.6.1.10,NETGEAR-QOS-DIFFSERV-PRIVATE-MIB::agentDiffServPolicyPerfOutHCTailDroppedPackets,Counter64,read-only,,current,,Tail-dropped packets high capacity count for the outbound policy-class  instance performance entry.
.1.3.6.1.4.1.4526.11.7.3.6.1.11,NETGEAR-QOS-DIFFSERV-PRIVATE-MIB::agentDiffServPolicyPerfOutHCRandomDroppedOctets,Counter64,read-only,,current,,Random-dropped octets high capacity count for the outbound policy-class  instance performance entry.
.1.3.6.1.4.1.4526.11.7.3.6.1.12,NETGEAR-QOS-DIFFSERV-PRIVATE-MIB::agentDiffServPolicyPerfOutHCRandomDroppedPackets,Counter64,read-only,,current,,Random-dropped packets high capacity count for the outbound policy-class  instance performance entry.
.1.3.6.1.4.1.4526.11.7.3.6.1.13,NETGEAR-QOS-DIFFSERV-PRIVATE-MIB::agentDiffServPolicyPerfOutHCShapeDelayedOctets,Counter64,read-only,,current,,Shape-delayed octets high capacity count for the outbound policy-class  instance performance entry.
.1.3.6.1.4.1.4526.11.7.3.6.1.14,NETGEAR-QOS-DIFFSERV-PRIVATE-MIB::agentDiffServPolicyPerfOutHCShapeDelayedPackets,Counter64,read-only,,current,,Shape-delayed packets high capacity count for the outbound policy-class  instance performance entry.
.1.3.6.1.4.1.4526.11.7.3.6.1.15,NETGEAR-QOS-DIFFSERV-PRIVATE-MIB::agentDiffServPolicyPerfOutHCSentOctets,Counter64,read-only,,current,,Sent octets high capacity count for the outbound policy-class instance  performance entry.
.1.3.6.1.4.1.4526.11.7.3.6.1.16,NETGEAR-QOS-DIFFSERV-PRIVATE-MIB::agentDiffServPolicyPerfOutHCSentPackets,Counter64,read-only,,current,,Sent packets high capacity count for the outbound policy-class instance  performance entry.
.1.3.6.1.4.1.4526.11.7.3.6.1.17,NETGEAR-QOS-DIFFSERV-PRIVATE-MIB::agentDiffServPolicyPerfOutStorageType,INTEGER,read-only,,current,other(1):volatile(2):nonVolatile(3):permanent(4):readOnly(5),Storage-type for this conceptual row.
.1.3.6.1.4.1.4526.11.7.3.6.1.18,NETGEAR-QOS-DIFFSERV-PRIVATE-MIB::agentDiffServPolicyPerfOutRowStatus,INTEGER,read-only,,current,active(1):notInService(2):notReady(3):createAndGo(4):createAndWait(5):destroy(6),The status of this conceptual row.
.1.3.6.1.4.1.4526.11.7.4,NETGEAR-QOS-DIFFSERV-PRIVATE-MIB::agentDiffServServiceGroup,,,,,,
.1.3.6.1.4.1.4526.11.7.4.1,NETGEAR-QOS-DIFFSERV-PRIVATE-MIB::agentDiffServServiceTable,,not-accessible,,current,,A table of the service entries.
.1.3.6.1.4.1.4526.11.7.4.1.1,NETGEAR-QOS-DIFFSERV-PRIVATE-MIB::agentDiffServServiceEntry,,not-accessible,agentDiffServServiceIfIndex:agentDiffServServiceIfDirection,current,,Represents entry for policy assigned to an interface in a particular  direction.
.1.3.6.1.4.1.4526.11.7.4.1.1.1,NETGEAR-QOS-DIFFSERV-PRIVATE-MIB::agentDiffServServiceIfIndex,Integer32,not-accessible,,current,,External interface number of the interface to which policy is assigned.
.1.3.6.1.4.1.4526.11.7.4.1.1.2,NETGEAR-QOS-DIFFSERV-PRIVATE-MIB::agentDiffServServiceIfDirection,INTEGER,not-accessible,,current,in(1):out(2),Interface direction to which the policy is assigned.
.1.3.6.1.4.1.4526.11.7.4.1.1.3,NETGEAR-QOS-DIFFSERV-PRIVATE-MIB::agentDiffServServicePolicyIndex,Unsigned32,read-create,,current,,Index of the Policy Table row whose policy definition is attached to the  interface in the specified direction.
.1.3.6.1.4.1.4526.11.7.4.1.1.4,NETGEAR-QOS-DIFFSERV-PRIVATE-MIB::agentDiffServServiceIfOperStatus,INTEGER,read-only,,current,up(1):down(2),The current operational state of the DiffServ service 
.1.3.6.1.4.1.4526.11.7.4.1.1.5,NETGEAR-QOS-DIFFSERV-PRIVATE-MIB::agentDiffServServiceStorageType,INTEGER,read-create,,current,other(1):volatile(2):nonVolatile(3):permanent(4):readOnly(5),Storage-type for this conceptual row
.1.3.6.1.4.1.4526.11.7.4.1.1.6,NETGEAR-QOS-DIFFSERV-PRIVATE-MIB::agentDiffServServiceRowStatus,INTEGER,read-create,,current,active(1):notInService(2):notReady(3):createAndGo(4):createAndWait(5):destroy(6),The status of this conceptual row.
.1.3.6.1.4.1.4526.11.7.4.2,NETGEAR-QOS-DIFFSERV-PRIVATE-MIB::agentDiffServServicePerfTable,,not-accessible,,current,,A table of service performance entries.
.1.3.6.1.4.1.4526.11.7.4.2.1,NETGEAR-QOS-DIFFSERV-PRIVATE-MIB::agentDiffServServicePerfEntry,,not-accessible,,current,,Represents a service performance entry.
.1.3.6.1.4.1.4526.11.7.4.2.1.1,NETGEAR-QOS-DIFFSERV-PRIVATE-MIB::agentDiffServServicePerfOfferedOctets,Counter32,read-only,,current,,Offered octets count for the specified service interface and direction
.1.3.6.1.4.1.4526.11.7.4.2.1.2,NETGEAR-QOS-DIFFSERV-PRIVATE-MIB::agentDiffServServicePerfOfferedPackets,Counter32,read-only,,current,,Offered packets count for specified service interface and direction
.1.3.6.1.4.1.4526.11.7.4.2.1.3,NETGEAR-QOS-DIFFSERV-PRIVATE-MIB::agentDiffServServicePerfDiscardedOctets,Counter32,read-only,,current,,Discarded octets count for the specified service interface and direction
.1.3.6.1.4.1.4526.11.7.4.2.1.4,NETGEAR-QOS-DIFFSERV-PRIVATE-MIB::agentDiffServServicePerfDiscardedPackets,Counter32,read-only,,current,,Discarded packets count for the specified service interface and direction
.1.3.6.1.4.1.4526.11.7.4.2.1.5,NETGEAR-QOS-DIFFSERV-PRIVATE-MIB::agentDiffServServicePerfSentOctets,Counter32,read-only,,current,,Sent octets count for the specified service interface and direction
.1.3.6.1.4.1.4526.11.7.4.2.1.6,NETGEAR-QOS-DIFFSERV-PRIVATE-MIB::agentDiffServServicePerfSentPackets,Counter32,read-only,,current,,Sent packets count for the specified service interface and direction
.1.3.6.1.4.1.4526.11.7.4.2.1.7,NETGEAR-QOS-DIFFSERV-PRIVATE-MIB::agentDiffServServicePerfHCOfferedOctets,Counter64,read-only,,current,,Offered octets high capacity count for the specified service interface  and direction
.1.3.6.1.4.1.4526.11.7.4.2.1.8,NETGEAR-QOS-DIFFSERV-PRIVATE-MIB::agentDiffServServicePerfHCOfferedPackets,Counter64,read-only,,current,,Offered packets high capacity count for the specified service interface  and direction
.1.3.6.1.4.1.4526.11.7.4.2.1.9,NETGEAR-QOS-DIFFSERV-PRIVATE-MIB::agentDiffServServicePerfHCDiscardedOctets,Counter64,read-only,,current,,Discarded octets high capacity count for the specified service interface  and direction
.1.3.6.1.4.1.4526.11.7.4.2.1.10,NETGEAR-QOS-DIFFSERV-PRIVATE-MIB::agentDiffServServicePerfHCDiscardedPackets,Counter64,read-only,,current,,Discarded packets high capacity count for the specified service interface  and direction
.1.3.6.1.4.1.4526.11.7.4.2.1.11,NETGEAR-QOS-DIFFSERV-PRIVATE-MIB::agentDiffServServicePerfHCSentOctets,Counter64,read-only,,current,,Sent octets high capacity count for the specified service interface and  direction
.1.3.6.1.4.1.4526.11.7.4.2.1.12,NETGEAR-QOS-DIFFSERV-PRIVATE-MIB::agentDiffServServicePerfHCSentPackets,Counter64,read-only,,current,,Sent packets high capacity count for the specified service interface and  direction
.1.3.6.1.4.1.4526.11.8,NETGEAR-RADIUS-AUTH-CLIENT-MIB::agentRadius,,,,,,The Netgear Private MIB for Radius Authentication Client
.1.3.6.1.4.1.4526.11.8.1,NETGEAR-RADIUS-AUTH-CLIENT-MIB::agentRadiusConfigGroup,,,,,,
.1.3.6.1.4.1.4526.11.8.1.1,NETGEAR-RADIUS-AUTH-CLIENT-MIB::agentRadiusMaxTransmit,Unsigned32,read-write,,current,,Maximum number of retransmissions of a RADIUS request packet
.1.3.6.1.4.1.4526.11.8.1.2,NETGEAR-RADIUS-AUTH-CLIENT-MIB::agentRadiusTimeout,Unsigned32,read-write,,current,,Time out duration (in seconds) before packets are retransmitted
.1.3.6.1.4.1.4526.11.8.1.3,NETGEAR-RADIUS-AUTH-CLIENT-MIB::agentRadiusAccountingMode,INTEGER,read-write,,current,enable(1):disable(2),Identifies if RADIUS Accounting has been enabled or not
.1.3.6.1.4.1.4526.11.8.1.4,NETGEAR-RADIUS-AUTH-CLIENT-MIB::agentRadiusStatsClear,INTEGER,read-write,,current,enable(1):disable(2),When set to enable(1), all Radius statistics will be reset.
.1.3.6.1.4.1.4526.11.8.1.5,NETGEAR-RADIUS-AUTH-CLIENT-MIB::agentRadiusAccountingIndexNextValid,Integer32,read-only,,current,,Indicates the next valid index into the agentRadiusAccountingConfigTable  for creation. If no additional entries are allowed, this will be 0.
.1.3.6.1.4.1.4526.11.8.1.6,NETGEAR-RADIUS-AUTH-CLIENT-MIB::agentRadiusAccountingConfigTable,,not-accessible,,current,,Table with information about Radius Accounting Server IP Addresses, port numbers and shared secret. Only one entry is supported at this time.
.1.3.6.1.4.1.4526.11.8.1.6.1,NETGEAR-RADIUS-AUTH-CLIENT-MIB::agentRadiusAccountingConfigEntry,,not-accessible,agentRadiusAccountingServerIndex,current,,Entry consisting of configuration data for a Radius Accounting Server.
.1.3.6.1.4.1.4526.11.8.1.6.1.1,NETGEAR-RADIUS-AUTH-CLIENT-MIB::agentRadiusAccountingServerIndex,Integer32,not-accessible,,current,,Unique index of the configured RADIUS accounting server. The next valid value of this object for creation is specified by  agentRadiusAccountingIndexNextValid. 
.1.3.6.1.4.1.4526.11.8.1.6.1.2,NETGEAR-RADIUS-AUTH-CLIENT-MIB::agentRadiusAccountingServerAddress,OCTET,read-create,,current,,IP Address of the configured RADIUS accounting server. This object cannot be changed after creation.
.1.3.6.1.4.1.4526.11.8.1.6.1.3,NETGEAR-RADIUS-AUTH-CLIENT-MIB::agentRadiusAccountingServerAddressType,INTEGER,read-create,,current,unknown(0):ipv4(1):ipv6(2):ipv4z(3):ipv6z(4):dns(16),IP Address Type of the configured RADIUS accounting server. This object cannot be changed after creation.
.1.3.6.1.4.1.4526.11.8.1.6.1.4,NETGEAR-RADIUS-AUTH-CLIENT-MIB::agentRadiusAccountingPort,Unsigned32,read-write,,current,,Port number for the RADIUS accounting server.
.1.3.6.1.4.1.4526.11.8.1.6.1.5,NETGEAR-RADIUS-AUTH-CLIENT-MIB::agentRadiusAccountingSecret,OCTET,read-write,,current,,Configured shared sercret for the RADIUS accounting server.
.1.3.6.1.4.1.4526.11.8.1.6.1.6,NETGEAR-RADIUS-AUTH-CLIENT-MIB::agentRadiusAccountingStatus,INTEGER,read-create,,current,active(1):notInService(2):notReady(3):createAndGo(4):createAndWait(5):destroy(6),Creates or destroys a RADIUS accounting server entry. During creation, the next available index is specified by the agentRadiusAccountingIndexNextValid object. Rows creation using a different value for agentRadiusAccountingServerIndex will fail.  active(1) - This entry is active. createAndGo(4) - Creates a new entry. destroy(6) - Deletes an entry.
.1.3.6.1.4.1.4526.11.8.1.7,NETGEAR-RADIUS-AUTH-CLIENT-MIB::agentRadiusServerIndexNextValid,Integer32,read-only,,current,,Indicates the next valid index into the agentRadiusServerConfigTable  for creation. If no additional entries are allowed, this will be 0.
.1.3.6.1.4.1.4526.11.8.1.8,NETGEAR-RADIUS-AUTH-CLIENT-MIB::agentRadiusServerConfigTable,,not-accessible,,current,,Table with information about Radius Authentication Server IP Addresses, port numbers and shared secret
.1.3.6.1.4.1.4526.11.8.1.8.1,NETGEAR-RADIUS-AUTH-CLIENT-MIB::agentRadiusServerConfigEntry,,not-accessible,agentRadiusServerIndex,current,,Entry consisting of configuration data for a Radius  Authentication Server.
.1.3.6.1.4.1.4526.11.8.1.8.1.1,NETGEAR-RADIUS-AUTH-CLIENT-MIB::agentRadiusServerIndex,Integer32,not-accessible,,current,,Unique index of the configured RADIUS server
.1.3.6.1.4.1.4526.11.8.1.8.1.2,NETGEAR-RADIUS-AUTH-CLIENT-MIB::agentRadiusServerAddress,OCTET,read-create,,current,,IP Address of the configured RADIUS server. This object cannot be changed after creation.
.1.3.6.1.4.1.4526.11.8.1.8.1.3,NETGEAR-RADIUS-AUTH-CLIENT-MIB::agentRadiusServerAddressType,INTEGER,read-create,,current,unknown(0):ipv4(1):ipv6(2):ipv4z(3):ipv6z(4):dns(16),IP Address Type of the configured RADIUS server. This object cannot be changed after creation.
.1.3.6.1.4.1.4526.11.8.1.8.1.4,NETGEAR-RADIUS-AUTH-CLIENT-MIB::agentRadiusServerPort,Unsigned32,read-write,,current,,Port number for the RADIUS server.
.1.3.6.1.4.1.4526.11.8.1.8.1.5,NETGEAR-RADIUS-AUTH-CLIENT-MIB::agentRadiusServerSecret,OCTET,read-write,,current,,Configured shared sercret for the RADIUS server.
.1.3.6.1.4.1.4526.11.8.1.8.1.6,NETGEAR-RADIUS-AUTH-CLIENT-MIB::agentRadiusServerPrimaryMode,INTEGER,read-write,,current,enable(1):disable(2),Configure the RADIUS server to be the primary server. If there is any  other server that is configured to be primary, that server is set to be  a seconday server and this entry is set Primary.
.1.3.6.1.4.1.4526.11.8.1.8.1.7,NETGEAR-RADIUS-AUTH-CLIENT-MIB::agentRadiusServerCurrentMode,INTEGER,read-only,,current,yes(1):no(2),Indicate if the RADIUS server is the current server in user for authentication.
.1.3.6.1.4.1.4526.11.8.1.8.1.8,NETGEAR-RADIUS-AUTH-CLIENT-MIB::agentRadiusServerMsgAuth,INTEGER,read-write,,current,enable(1):disable(2),Enable or disable the message authenticator attribute for this  RADIUS server.
.1.3.6.1.4.1.4526.11.8.1.8.1.9,NETGEAR-RADIUS-AUTH-CLIENT-MIB::agentRadiusServerStatus,INTEGER,read-create,,current,active(1):notInService(2):notReady(3):createAndGo(4):createAndWait(5):destroy(6),Creates or destroys a RADIUS Authentication server entry. During creation, the next available index is specified by the agentRadiusServerIndexNextValid object. Rows creation using a different value for agentRadiusServerIndex will fail.  active(1) - This entry is active. createAndGo(4) - Creates a new entry. destroy(6) - Deletes an entry.
.1.3.6.1.4.1.4526.11.11,NETGEAR-MGMT-SECURITY-MIB::agentMgmtSecurity,,,,,,The Netgear Private MIB for FastPath Security
.1.3.6.1.4.1.4526.11.11.1,NETGEAR-MGMT-SECURITY-MIB::agentSSLConfigGroup,,,,,,
.1.3.6.1.4.1.4526.11.11.1.1,NETGEAR-MGMT-SECURITY-MIB::agentSSLAdminMode,INTEGER,read-write,,current,enable(1):disable(2),Configures whether the SSL service is enabled on this switch. The default value is disable(2).
.1.3.6.1.4.1.4526.11.11.1.2,NETGEAR-MGMT-SECURITY-MIB::agentSSLSecurePort,Integer32,read-write,,current,,Configures the port the SSL service will respond on. The default value is 443.
.1.3.6.1.4.1.4526.11.11.1.3,NETGEAR-MGMT-SECURITY-MIB::agentSSLProtocolLevel,INTEGER,read-write,,current,ssl30(1):tls10(2):both(3),Configures which protocol versions of SSL are enabled on this switch. The default value is both(3).
.1.3.6.1.4.1.4526.11.11.1.4,NETGEAR-MGMT-SECURITY-MIB::agentSSLMaxSessions,Integer32,read-write,,current,,Configures the maximum number of allowable SSL sessions. The default value is 16.
.1.3.6.1.4.1.4526.11.11.1.5,NETGEAR-MGMT-SECURITY-MIB::agentSSLHardTimeout,Integer32,read-write,,current,,Configures the hard timeout for SSL sessions in hours. The default value is 24 hours.
.1.3.6.1.4.1.4526.11.11.1.6,NETGEAR-MGMT-SECURITY-MIB::agentSSLSoftTimeout,Integer32,read-write,,current,,Configures the soft (activity) timeout for SSL sessions in minutes. The default value is 5 minutes.
.1.3.6.1.4.1.4526.11.11.1.7,NETGEAR-MGMT-SECURITY-MIB::agentSSLCertificatePresent,INTEGER,read-only,,current,true(1):false(2),Boolean value indicating whether SSL certificate files exist on the device.
.1.3.6.1.4.1.4526.11.11.1.8,NETGEAR-MGMT-SECURITY-MIB::agentSSLCertificateControl,INTEGER,read-write,,current,noop(1):generate(2):delete(3),Controls certificate generation and deletion. Always returns noop(1).
.1.3.6.1.4.1.4526.11.11.1.9,NETGEAR-MGMT-SECURITY-MIB::agentSSLCertificateGenerationStatus,INTEGER,read-only,,current,true(1):false(2),Indicates whether certificate files are currently being generated.
.1.3.6.1.4.1.4526.11.11.2,NETGEAR-MGMT-SECURITY-MIB::agentSSHConfigGroup,,,,,,
.1.3.6.1.4.1.4526.11.11.2.1,NETGEAR-MGMT-SECURITY-MIB::agentSSHAdminMode,INTEGER,read-write,,current,enable(1):disable(2),Configures whether the SSH service is enabled on this switch. The default value is disable(2).
.1.3.6.1.4.1.4526.11.11.2.2,NETGEAR-MGMT-SECURITY-MIB::agentSSHProtocolLevel,INTEGER,read-write,,current,ssh10(1):ssh20(2):both(3),Configures which protocol versions of SSH are enabled on this switch. The default value is both(3).
.1.3.6.1.4.1.4526.11.11.2.3,NETGEAR-MGMT-SECURITY-MIB::agentSSHSessionsCount,Integer32,read-only,,current,,Current number of active SSH sessions on this switch.
.1.3.6.1.4.1.4526.11.11.2.4,NETGEAR-MGMT-SECURITY-MIB::agentSSHMaxSessionsCount,Integer32,read-write,,current,,Max number of SSH sessions permitted on this switch.
.1.3.6.1.4.1.4526.11.11.2.5,NETGEAR-MGMT-SECURITY-MIB::agentSSHSessionTimeout,Integer32,read-write,,current,,ssh idle timeout value for this switch im minutes.
.1.3.6.1.4.1.4526.11.11.2.6,NETGEAR-MGMT-SECURITY-MIB::agentSSHKeysPresent,INTEGER,read-only,,current,dsa(1):rsa(2):both(3):none(4),Indicates what key files are present on the device, if any.
.1.3.6.1.4.1.4526.11.11.2.7,NETGEAR-MGMT-SECURITY-MIB::agentSSHKeyGenerationStatus,INTEGER,read-only,,current,dsa(1):rsa(2):both(3):none(4),Indicates what key files are currently being generated, if any.
.1.3.6.1.4.1.4526.11.11.2.8,NETGEAR-MGMT-SECURITY-MIB::agentSSHRSAKeyControl,INTEGER,read-write,,current,noop(1):generate(2):delete(3),Controls RSA key generation and deletion. Always returns noop(1).
.1.3.6.1.4.1.4526.11.11.2.9,NETGEAR-MGMT-SECURITY-MIB::agentSSHDSAKeyControl,INTEGER,read-write,,current,noop(1):generate(2):delete(3),Controls DSA key generation and deletion. Always returns noop(1).
.1.3.6.1.4.1.4526.11.11.3,NETGEAR-MGMT-SECURITY-MIB::agentACALConfigGroup,,,,,,
.1.3.6.1.4.1.4526.11.11.3.1,NETGEAR-MGMT-SECURITY-MIB::agentLanMngInfEnable,INTEGER,read-write,,current,true(1):false(2),The variable specifies if Management ACL functionality is enabled.
.1.3.6.1.4.1.4526.11.11.3.2,NETGEAR-MGMT-SECURITY-MIB::agentLanMngInfActiveListName,OCTET,read-write,,current,,This parameter may be used to activate a particular management ACL rule-set. If no management ACL rule-set is specified (by  setting this parameter to a NULL string) then the system assumes  that management ACL is disabled (similar to setting  agentLanMngInfEnable to FALSE - meaning that ACL is not checked  and all management access are allowed). If the user attempts to set this parameter to the name of an invalid or non-existence ACL rule-set, the configuration will fail. If the user deletes a management ACL rule-set to which this  parameter references, the parameter will be set to a NULL  string and the system will assume that management ACL checking  has been disabled.
.1.3.6.1.4.1.4526.11.11.3.3,NETGEAR-MGMT-SECURITY-MIB::agentLanMngInfListTable,,not-accessible,,current,,This table defines all management ACL rule-set as well as the rules within the rule-set. To activate a specific ACL rule-set, please  refer to the 'agentLanMngInfActiveListName' parameter above.
.1.3.6.1.4.1.4526.11.11.3.3.1,NETGEAR-MGMT-SECURITY-MIB::agentLanMngInfListEntry,,not-accessible,agentLanMngInfListName:agentLanMngInfListPriority,current,,Each entry in the table is a single rule within a given rule-set. The rules within a rule-set are grouped together via a common name 'gentLanMngInfListName'. Each rule has a specific priority within the rule-set given by 'agentLanMngInfListPriority', where priority 1 is the highest priority of the given set.
.1.3.6.1.4.1.4526.11.11.3.3.1.1,NETGEAR-MGMT-SECURITY-MIB::agentLanMngInfListName,OCTET,read-only,,current,,The name of a given rule-set.
.1.3.6.1.4.1.4526.11.11.3.3.1.2,NETGEAR-MGMT-SECURITY-MIB::agentLanMngInfListPriority,Unsigned32,read-only,,current,,The priority value of a given rule within the rule-set.User must enter the priority value along with agentLanMngInfListIpAddr  and agentLanMngInfListAction.
.1.3.6.1.4.1.4526.11.11.3.3.1.3,NETGEAR-MGMT-SECURITY-MIB::agentLanMngInfListIpAddr,IpAddress,read-write,,current,,The IP address to which this rule applies. The IP address may be set  to be 0, which means that the rule applies to all IP addresses. Otherwise, the rule applies to all management request which comes from a given IP address.User must enter the IP address value along  with agentLanMngInfListAction and agentLanMngInfListPriority.
.1.3.6.1.4.1.4526.11.11.3.3.1.4,NETGEAR-MGMT-SECURITY-MIB::agentLanMngInfListIpNetMask,IpAddress,read-write,,current,,The subnet mask associated with the IP address of this entry. The  value of the mask is an IP address with all the network bits set  to 1 and all the hosts bits set to 0. Using this in conjunction with the ipAddress given above, it is possible to make the rule applies to a subnet instead of a specific address (to force the rule to apply to a single address, use a netmask with all bits set to 1 (i.e. 255.255.255.255 netmask).User must enter the subnet  mask value along with agentLanMngInfListAction,  agentLanMngInfListIpAddr and agentLanMngInfListPriority.
.1.3.6.1.4.1.4526.11.11.3.3.1.5,NETGEAR-MGMT-SECURITY-MIB::agentLanMngInfListService,INTEGER,read-write,,current,allType(0):snmp(1):http(2):https(3),The type of services that this rule applies to. By setting this to a specific service type, the rule will only apply if the  request is coming to the switch using the particular protocol type specified. The Service type address can be configured to  be 0, which means any of the supported protocols or service such as SNMP, HTTP, HTTPS are applicable.User must enter the  type of service value along with agentLanMngInfListAction, agentLanMngInfListIpAddr and agentLanMngInfListPriority.
.1.3.6.1.4.1.4526.11.11.3.3.1.6,NETGEAR-MGMT-SECURITY-MIB::agentLanMngInfListAction,INTEGER,read-write,,current,permit(0):deny(1),The action to apply to the given traffic matching the rule. The action may be to permit or deny the requested management access. This  object MUST be set along with agentLanMngInfListPriority and agentLanMngInfListIpAddr
.1.3.6.1.4.1.4526.11.11.3.3.1.7,NETGEAR-MGMT-SECURITY-MIB::agentLanMngInfListRowStatus,INTEGER,read-create,,current,active(1):notInService(2):notReady(3):createAndGo(4):createAndWait(5):destroy(6),The row status variable, used according to row creation and deletion conventions.
.1.3.6.1.4.1.4526.11.12,NETGEAR-DHCPSERVER-PRIVATE-MIB::agentDHCPServerPrivate,,,,,,The Netgear Private MIB for DHCP Server
.1.3.6.1.4.1.4526.11.12.1,NETGEAR-DHCPSERVER-PRIVATE-MIB::agentDhcpServerGroup,,,,,,
.1.3.6.1.4.1.4526.11.12.1.1,NETGEAR-DHCPSERVER-PRIVATE-MIB::agentDhcpServerAdminMode,INTEGER,read-write,,current,enable(1):disable(2), Admin-mode of the DHCP Server.
.1.3.6.1.4.1.4526.11.12.1.2,NETGEAR-DHCPSERVER-PRIVATE-MIB::agentDhcpServerPingPktNos,INTEGER,read-write,,current,, The no. of packets a DHCP Server sends to a pool address as part of a ping operation.Setting the value of ping-packets to zero turns off DHCP Server ping operation .
.1.3.6.1.4.1.4526.11.12.1.3,NETGEAR-DHCPSERVER-PRIVATE-MIB::agentDhcpServerAutomaticBindingsNos,Counter32,read-only,,current,, The no. of IP addresses that have been assigned automatically.
.1.3.6.1.4.1.4526.11.12.1.4,NETGEAR-DHCPSERVER-PRIVATE-MIB::agentDhcpServerExpiredBindingsNos,Counter32,read-only,,current,, The no. of expired leases.
.1.3.6.1.4.1.4526.11.12.1.5,NETGEAR-DHCPSERVER-PRIVATE-MIB::agentDhcpServerMalformedMessagesReceived,Counter32,read-only,,current,, The no. of malformed(truncated or corrupt) messages that have been received by the DHCP server.
.1.3.6.1.4.1.4526.11.12.1.6,NETGEAR-DHCPSERVER-PRIVATE-MIB::agentDhcpServerDISCOVERMessagesReceived,Counter32,read-only,,current,, The no. of DHCP messages of type DHCPDISCOVER that have been received by the DHCP server.
.1.3.6.1.4.1.4526.11.12.1.7,NETGEAR-DHCPSERVER-PRIVATE-MIB::agentDhcpServerREQUESTMessagesReceived,Counter32,read-only,,current,, The no. of DHCP messages of type DHCPREQUEST that have been received by the DHCP server.
.1.3.6.1.4.1.4526.11.12.1.8,NETGEAR-DHCPSERVER-PRIVATE-MIB::agentDhcpServerDECLINEMessagesReceived,Counter32,read-only,,current,, The no. of DHCP messages of type DHCPDECLINE that have been received by the DHCP server.
.1.3.6.1.4.1.4526.11.12.1.9,NETGEAR-DHCPSERVER-PRIVATE-MIB::agentDhcpServerRELEASEMessagesReceived,Counter32,read-only,,current,, The no. of DHCP messages of type DHCPRELEASE that have been received by the DHCP server.
.1.3.6.1.4.1.4526.11.12.1.10,NETGEAR-DHCPSERVER-PRIVATE-MIB::agentDhcpServerINFORMMessagesReceived,Counter32,read-only,,current,, The no. of DHCP messages of type DHCPINFORM that have been received by the DHCP server.
.1.3.6.1.4.1.4526.11.12.1.11,NETGEAR-DHCPSERVER-PRIVATE-MIB::agentDhcpServerOFFERMessagesSent,Counter32,read-only,,current,, The no. of DHCP messages of type DHCPOFFER that have been sent by the DHCP server.
.1.3.6.1.4.1.4526.11.12.1.12,NETGEAR-DHCPSERVER-PRIVATE-MIB::agentDhcpServerACKMessagesSent,Counter32,read-only,,current,, The no. of DHCP messages of type DHCPACK that have been sent by the DHCP server.
.1.3.6.1.4.1.4526.11.12.1.13,NETGEAR-DHCPSERVER-PRIVATE-MIB::agentDhcpServerNAKMessagesSent,Counter32,read-only,,current,, The no. of DHCP messages of type DHCPNAK that have been sent by the DHCP server.
.1.3.6.1.4.1.4526.11.12.1.14,NETGEAR-DHCPSERVER-PRIVATE-MIB::agentDhcpServerClearStatistics,INTEGER,read-write,,current,enable(1):disable(2), Clears the DHCP server statistics.
.1.3.6.1.4.1.4526.11.12.1.15,NETGEAR-DHCPSERVER-PRIVATE-MIB::agentDhcpServerBootpAutomatic,INTEGER,read-write,,current,enable(1):disable(2),Used to enable or disable autmatic address allocation to bootp clients from dynamic address pools.
.1.3.6.1.4.1.4526.11.12.2,NETGEAR-DHCPSERVER-PRIVATE-MIB::agentDhcpServerPoolConfigGroup,,,,,,
.1.3.6.1.4.1.4526.11.12.2.1,NETGEAR-DHCPSERVER-PRIVATE-MIB::agentDhcpServerPoolNameCreate,OCTET,read-write,,current,,A pool is created by applying write operation on this MIB object and providing a new pool-name. Get operation on this MIB object returns a null-value, as for the purpose of viewing the pool name, the user should perform the traversal of agentDhcpServerPoolConfigTable. For this reason the get operation on object agentDhcpServerPoolNameCreate becomes insignificant.
.1.3.6.1.4.1.4526.11.12.2.2,NETGEAR-DHCPSERVER-PRIVATE-MIB::agentDhcpServerPoolConfigTable,,not-accessible,,current,,A table of the DHCP Server Pool configuration entries.
.1.3.6.1.4.1.4526.11.12.2.2.1,NETGEAR-DHCPSERVER-PRIVATE-MIB::agentDhcpServerPoolConfigEntry,,not-accessible,agentDhcpServerPoolIndex,current,,Represents entry for a Dhcp server pool.
.1.3.6.1.4.1.4526.11.12.2.2.1.1,NETGEAR-DHCPSERVER-PRIVATE-MIB::agentDhcpServerPoolIndex,Unsigned32,read-only,,current,,The Pool Index, which 'll be used as index for the PoolConfig Table.
.1.3.6.1.4.1.4526.11.12.2.2.1.2,NETGEAR-DHCPSERVER-PRIVATE-MIB::agentDhcpServerPoolName,OCTET,read-only,,current,,The name of the DHCP Address pool. This value cannot be modified
.1.3.6.1.4.1.4526.11.12.2.2.1.3,NETGEAR-DHCPSERVER-PRIVATE-MIB::agentDhcpServerPoolDefRouter,OCTET,read-write,,current,,This specifies the default-router list(each default-router is separated by comma and the list is terminated by semi-colon) for a DHCP client, an example would be 10.10.1.1,192.168.36.1,157.227.44.1;(no spaces in between).User should enter a 'null' or 'NULL' string to remove current default-router list.
.1.3.6.1.4.1.4526.11.12.2.2.1.4,NETGEAR-DHCPSERVER-PRIVATE-MIB::agentDhcpServerPoolDNSServer,OCTET,read-write,,current,,This specifies the DNS IP servers(each DNS IP server is separated by comma and the list is terminated by semi-colon) for a DHCP client, an example would be 10.10.1.1,192.168.36.1,157.227.44.1;(no spaces in between).User should enter a 'null' or 'NULL' string to remove current default-router list.
.1.3.6.1.4.1.4526.11.12.2.2.1.5,NETGEAR-DHCPSERVER-PRIVATE-MIB::agentDhcpServerPoolLeaseTime,Integer32,read-write,,current,,This specifies the duration of the lease(in minutes) for an IP address that is assigened from a DHCP server to a DHCP client. For infinite leases, lease-time value will be set to 86400.
.1.3.6.1.4.1.4526.11.12.2.2.1.6,NETGEAR-DHCPSERVER-PRIVATE-MIB::agentDhcpServerPoolType,INTEGER,read-only,,current,un-allocated(0):dynamic(1):manual(2),This specifies the type of the binding that is associated with this pool.
.1.3.6.1.4.1.4526.11.12.2.2.1.7,NETGEAR-DHCPSERVER-PRIVATE-MIB::agentDhcpServerPoolNetbiosNameServer,OCTET,read-write,,current,,This specifies the IP address-list of Net BIOS name-servers that are  available to DHCP clients (each IP address in this list is separated by comma and the list is terminated by semi-colon), an example would be 10.10.1.1,192.168.36.1,157.227.44.1;(no spaces in between).User should enter a 'null' or 'NULL' string to remove current Net BIOS name-server list.
.1.3.6.1.4.1.4526.11.12.2.2.1.8,NETGEAR-DHCPSERVER-PRIVATE-MIB::agentDhcpServerPoolNetbiosNodeType,INTEGER,read-write,,current,none(0):b-node(1):p-node(2):m-node(4):h-node(8),This specifies the NetBIOS node-type for DHCP clients. 'none' is shown if  node-type is not set to any of the four values.
.1.3.6.1.4.1.4526.11.12.2.2.1.9,NETGEAR-DHCPSERVER-PRIVATE-MIB::agentDhcpServerPoolNextServer,IpAddress,read-write,,current,,This configures the next server in the boot-process of a DHCP clients.User should enter zero(0.0.0.0) to remove the current Next-server address
.1.3.6.1.4.1.4526.11.12.2.2.1.10,NETGEAR-DHCPSERVER-PRIVATE-MIB::agentDhcpServerPoolDomainName,OCTET,read-write,,current,,This specifies the domain-name for a DHCP client. User should enter a 'null' or 'NULL' string to remove specified domain-name.
.1.3.6.1.4.1.4526.11.12.2.2.1.11,NETGEAR-DHCPSERVER-PRIVATE-MIB::agentDhcpServerPoolBootfile,OCTET,read-write,,current,,This specifies the name of the default boot image for a DHCP client.User should enter a 'null' or 'NULL' string to remove specified bootfile name.
.1.3.6.1.4.1.4526.11.12.2.2.1.12,NETGEAR-DHCPSERVER-PRIVATE-MIB::agentDhcpServerPoolRowStatus,INTEGER,read-write,,current,active(1):notInService(2):notReady(3):createAndGo(4):createAndWait(5):destroy(6),The row status variable is used according to installation and removal conventions for conceptual rows. When a pool is created by applying write operation on 'agentDhcpServerPoolCreateName',row-status becomes 'active'. If row-status for a poolEntry is set to 'destroy', the corresponding pool gets deleted. 
.1.3.6.1.4.1.4526.11.12.2.3,NETGEAR-DHCPSERVER-PRIVATE-MIB::agentDhcpServerPoolAllocationTable,,not-accessible,,current,,A table of the DHCP Server's pool entries, showing the binding(dynamic/manual) specific parameters.
.1.3.6.1.4.1.4526.11.12.2.3.1,NETGEAR-DHCPSERVER-PRIVATE-MIB::agentDhcpServerPoolAllocationEntry,,not-accessible,,current,,Represents entry for a Dhcp server's allocation pool.
.1.3.6.1.4.1.4526.11.12.2.3.1.1,NETGEAR-DHCPSERVER-PRIVATE-MIB::agentDhcpServerPoolAllocationName,OCTET,read-only,,current,,This specifies name of the DHCP Address pool having dynamic binding. This value is same as agentDhcpServerPoolName of the agentDhcpServerPoolConfigTable.
.1.3.6.1.4.1.4526.11.12.2.3.1.2,NETGEAR-DHCPSERVER-PRIVATE-MIB::agentDhcpServerDynamicPoolIpAddress,IpAddress,read-write,,current,,The IP address of the DHCP Address pool. The IP address must be set before setting the IP Mask or IP Prefix Length. After setting IP address, network -mask, or IP Prefix length must be set in order to change the pool type to dynamic. This value shows 0.0.0.0, if the binding type is 'un-allocated',or,'manual'.
.1.3.6.1.4.1.4526.11.12.2.3.1.3,NETGEAR-DHCPSERVER-PRIVATE-MIB::agentDhcpServerDynamicPoolIpMask,IpAddress,read-write,,current,,The bit-combination that renders which portion of the address of the DHCP address pool refers to the network or subnet and which part refers to the host.The IP address must have been set before. This value shows 0.0.0.0, if the binding type is 'un-allocated',or,'manual'.
.1.3.6.1.4.1.4526.11.12.2.3.1.4,NETGEAR-DHCPSERVER-PRIVATE-MIB::agentDhcpServerDynamicPoolIpPrefixLength,Unsigned32,read-write,,current,,This specifies the no. of bits that comprise the address-prefix. The prefix is an alternative way of specifying the network-mask of the client.The IP address must have been set before. This value shows 0, if the binding type is 'un-allocated',or,'mnaual'.
.1.3.6.1.4.1.4526.11.12.2.3.1.5,NETGEAR-DHCPSERVER-PRIVATE-MIB::agentDhcpServerPoolAllocationType,INTEGER,read-only,,current,un-allocated(0):dynamic(1):manual(2),This specifies the type of the binding that is associated with this pool.
.1.3.6.1.4.1.4526.11.12.2.3.1.6,NETGEAR-DHCPSERVER-PRIVATE-MIB::agentDhcpServerManualPoolClientIdentifier,OCTET,read-write,,current,,It specifies the unique identifier (in colon separated hexadecimal format) of a DHCP client. It is valid for manual bindings only. It displays 'unconfigured',if the binding type is 'un-allocated',or,'dynamic'. To set this object, input should be 7 octets long with the hardware type in the first octet.
.1.3.6.1.4.1.4526.11.12.2.3.1.7,NETGEAR-DHCPSERVER-PRIVATE-MIB::agentDhcpServerManualPoolClientName,OCTET,read-write,,current,,It specifies the name of a DHCP client. Client name should't include domain-name. It displays 'unconfigured',if the binding type is 'un-allocated',or,'dynamic'. 
.1.3.6.1.4.1.4526.11.12.2.3.1.8,NETGEAR-DHCPSERVER-PRIVATE-MIB::agentDhcpServerManualPoolClientHWAddr,OCTET,read-write,,current,,It specifies the hardware-address of a DHCP client. It is valid for manual bindings only. It displays 'unconfigured',if the binding type is 'un-allocated',or,'dynamic'. After hardware-address, hardware-type will be configured.
.1.3.6.1.4.1.4526.11.12.2.3.1.9,NETGEAR-DHCPSERVER-PRIVATE-MIB::agentDhcpServerManualPoolClientHWType,INTEGER,read-write,,current,ethernet(1):ieee802(6),It specifies the hardware-type of a DHCP client. It is valid for manual bindings only. It displays 'unconfigured',if the binding type is 'un-allocated',or,'dynamic'. Before this, hardware-address must be configured.
.1.3.6.1.4.1.4526.11.12.2.3.1.10,NETGEAR-DHCPSERVER-PRIVATE-MIB::agentDhcpServerManualPoolIpAddress,IpAddress,read-write,,current,,The IP address of the DHCP Address pool for manual binding. The IP address must be set before setting the IP Mask or IP Prefix Length.After setting IP address, network -mask, or IP Prefix length must be set in order to change the pool type to dynamic. This value shows 0.0.0.0, if the binding type is 'un-allocated',or,'dynamic'.
.1.3.6.1.4.1.4526.11.12.2.3.1.11,NETGEAR-DHCPSERVER-PRIVATE-MIB::agentDhcpServerManualPoolIpMask,IpAddress,read-write,,current,,The bit-combination that renders which portion of the address of the DHCP address pool for a manual binding refers to the network or subnet and which part refers to the host. The IP address must have been set before. This value shows 0.0.0.0, if the binding type is 'un-allocated',or,'dynamic'.
.1.3.6.1.4.1.4526.11.12.2.3.1.12,NETGEAR-DHCPSERVER-PRIVATE-MIB::agentDhcpServerManualPoolIpPrefixLength,Unsigned32,read-write,,current,,This specifies the no. of bits that comprise the address-prefix. The prefix is an alternative way of specifying the network-mask of the client.The IP address must have been set before. This value shows 0, if the binding type is 'un-allocated',or,'dynamic'.
.1.3.6.1.4.1.4526.11.12.2.4,NETGEAR-DHCPSERVER-PRIVATE-MIB::agentDhcpServerExcludedAddressRangeCreate,OCTET,read-write,,current,,It sets the IP address-ranges(from low to high) that a DHCP server should not assign to DHCP clients. Each time  this MIB object is set successfully, one excluded range  of IP address will be set. It is given in format - start and end IP address  separated by '-' and terminated by ';'. One example would be - 192.168.36.1-200.1.1.1; . This sets one excluded range of IP address,which starts at 192.168.36.1 and ends at 200.1.1.1.  If only start IP address is given, end IP address is assumed to be equal to the start IP address. Get operation on this MIB object returns a  null-value, as for the purpose of viewing the  exclude-address ranges, the user should perform the  traversal of agentDhcpServerExcludedAddressRangeTable. For this reason the get operation on object  agentDhcpServerExcludedAddressRangeCreate becomes insignificant.
.1.3.6.1.4.1.4526.11.12.2.5,NETGEAR-DHCPSERVER-PRIVATE-MIB::agentDhcpServerExcludedAddressRangeTable,,not-accessible,,current,,A table of the DHCP Server Pool configuration entries.
.1.3.6.1.4.1.4526.11.12.2.5.1,NETGEAR-DHCPSERVER-PRIVATE-MIB::agentDhcpServerExcludedAddressRangeEntry,,not-accessible,agentDhcpServerExcludedRangeIndex,current,,Represents entry for a Dhcp server excluded address range table.
.1.3.6.1.4.1.4526.11.12.2.5.1.1,NETGEAR-DHCPSERVER-PRIVATE-MIB::agentDhcpServerExcludedRangeIndex,Unsigned32,read-only,,current,,This specifies the index of the excluded IP address-range table.
.1.3.6.1.4.1.4526.11.12.2.5.1.2,NETGEAR-DHCPSERVER-PRIVATE-MIB::agentDhcpServerExcludedStartIpAddress,IpAddress,read-only,,current,,This specifies the starting IP address of the excluded address-range.
.1.3.6.1.4.1.4526.11.12.2.5.1.3,NETGEAR-DHCPSERVER-PRIVATE-MIB::agentDhcpServerExcludedEndIpAddress,IpAddress,read-only,,current,,This specifies the ending IP address of the excluded address-range.
.1.3.6.1.4.1.4526.11.12.2.5.1.4,NETGEAR-DHCPSERVER-PRIVATE-MIB::agentDhcpServerExcludedAddressRangeStatus,INTEGER,read-write,,current,active(1):notInService(2):notReady(3):createAndGo(4):createAndWait(5):destroy(6),This specifies the row-status of the excluded address-range. Implemented values are - active(1) and destroy(6). For a valid range, the row-satus will return active(1). When it is set to destroy(6), the corresponding address-range is deleted.
.1.3.6.1.4.1.4526.11.12.2.6,NETGEAR-DHCPSERVER-PRIVATE-MIB::agentDhcpServerPoolOptionCreate,OCTET,read-write,,current,,This sets the option for an existing DHCP Server pool. Here, it is required  to enter the pool-index, for which option is to be set and  the value of the DHCP option code in string-format : pool-index and option code  separated by '-' and terminated by ';', one example would be -> 1-19;  , 1 is the pool-index and 19 is the option code. 
.1.3.6.1.4.1.4526.11.12.2.7,NETGEAR-DHCPSERVER-PRIVATE-MIB::agentDhcpServerPoolOptionTable,,not-accessible,,current,,A table for configuring DHCP Server options.
.1.3.6.1.4.1.4526.11.12.2.7.1,NETGEAR-DHCPSERVER-PRIVATE-MIB::agentDhcpServerPoolOptionEntry,,not-accessible,agentDhcpServerPoolOptionIndex:agentDhcpServerPoolOptionCode,current,,Represents entry for a Dhcp server option table.
.1.3.6.1.4.1.4526.11.12.2.7.1.1,NETGEAR-DHCPSERVER-PRIVATE-MIB::agentDhcpServerPoolOptionIndex,Unsigned32,read-only,,current,,The Pool Index alongwith option-code, acts as index for the DHCP Server Option table. 
.1.3.6.1.4.1.4526.11.12.2.7.1.2,NETGEAR-DHCPSERVER-PRIVATE-MIB::agentDhcpServerPoolOptionCode,Unsigned32,read-write,,current,,This specifies the DHCP option code. This alongwith pool-index acts as the index of the  DHCP Server Option table.
.1.3.6.1.4.1.4526.11.12.2.7.1.3,NETGEAR-DHCPSERVER-PRIVATE-MIB::agentDhcpServerOptionPoolName,OCTET,read-only,,current,,The name of the DHCP Address pool. This value cannot be modified
.1.3.6.1.4.1.4526.11.12.2.7.1.4,NETGEAR-DHCPSERVER-PRIVATE-MIB::agentDhcpServerPoolOptionAsciiData,OCTET,read-write,,current,,This specifies an NVT ASCII character string. ASCII character strings  that contain white space must be delimited by quotation marks.  If an ascii optiondata is entered again, it gets concatenated with the  previous ascii data.
.1.3.6.1.4.1.4526.11.12.2.7.1.5,NETGEAR-DHCPSERVER-PRIVATE-MIB::agentDhcpServerPoolOptionHexData,OCTET,read-write,,current,,This specifies semi-colon separated hexadecimal data. Two hexadecimal digits  in hexadecimal character string represents one byte . Hexadecimal strings can  be entered in the following formats : 1) continuous hexadecimal digits like -- 0123456789abcdef 2) hexadecimal digits separated by space ' ' -- 01 23 45 67 de 0f 3) Two hexadecimal digits separated by delimeter ':' -- 01:02:a0 de:0f 78:5e  4) Four hexadecimal digits separated by delimeter '.' -- 01ab.c0de.7865  If a Hex optiondata is entered again, it gets concatenated with the  previous Hex data.
.1.3.6.1.4.1.4526.11.12.2.7.1.6,NETGEAR-DHCPSERVER-PRIVATE-MIB::agentDhcpServerPoolOptionIpAddressData,OCTET,read-write,,current,,This specifies the IP-address list(each IP-address is separated by comma and the list is terminated by semi-colon) for a DHCP client, an example would be 10.10.1.1,192.168.36.1,157.227.44.1;(no spaces in between). If a IP option is entered again, it gets concatenated with the  previous IP data. Maximum no. of IP addresses that can be entered at one time is 8. 
.1.3.6.1.4.1.4526.11.12.2.7.1.7,NETGEAR-DHCPSERVER-PRIVATE-MIB::agentDhcpServerPoolOptionStatus,INTEGER,read-write,,current,active(1):notInService(2):notReady(3):createAndGo(4):createAndWait(5):destroy(6),This specifies the row-status of the DHCP Server Pool option.
.1.3.6.1.4.1.4526.11.12.3,NETGEAR-DHCPSERVER-PRIVATE-MIB::agentDhcpServerLeaseGroup,,,,,,
.1.3.6.1.4.1.4526.11.12.3.1,NETGEAR-DHCPSERVER-PRIVATE-MIB::agentDhcpServerLeaseClearAllBindings,INTEGER,read-write,,current,enable(1):disable(2),Clears All the DHCP server bindings.
.1.3.6.1.4.1.4526.11.12.3.2,NETGEAR-DHCPSERVER-PRIVATE-MIB::agentDhcpServerLeaseTable,,not-accessible,,current,,A table of the DHCP Server's Lease entries.
.1.3.6.1.4.1.4526.11.12.3.2.1,NETGEAR-DHCPSERVER-PRIVATE-MIB::agentDhcpServerLeaseEntry,,not-accessible,agentDhcpServerLeaseIPAddress,current,,Represents entry for a Dhcp server's leases.
.1.3.6.1.4.1.4526.11.12.3.2.1.1,NETGEAR-DHCPSERVER-PRIVATE-MIB::agentDhcpServerLeaseIPAddress,IpAddress,read-only,,current,,This specifies the IP address leased to the client.
.1.3.6.1.4.1.4526.11.12.3.2.1.2,NETGEAR-DHCPSERVER-PRIVATE-MIB::agentDhcpServerLeaseIPMask,IpAddress,read-only,,current,,This specifies the IP mask of the address leased to the client.
.1.3.6.1.4.1.4526.11.12.3.2.1.3,NETGEAR-DHCPSERVER-PRIVATE-MIB::agentDhcpServerLeaseHWAddress,OCTET,read-only,,current,,This specifies the hardware address of the client.
.1.3.6.1.4.1.4526.11.12.3.2.1.4,NETGEAR-DHCPSERVER-PRIVATE-MIB::agentDhcpServerLeaseRemainingTime,TimeTicks,read-only,,current,,This specifies the period for which the lease is valid. It is displayed in days, hours, minutes, and seconds.
.1.3.6.1.4.1.4526.11.12.3.2.1.5,NETGEAR-DHCPSERVER-PRIVATE-MIB::agentDhcpServerLeaseType,INTEGER,read-only,,current,automatic(1):manual(2),This specifies the type of address lease as Automatic or Manual.
.1.3.6.1.4.1.4526.11.12.3.2.1.6,NETGEAR-DHCPSERVER-PRIVATE-MIB::agentDhcpServerLeaseStatus,INTEGER,read-write,,current,active(1):notInService(2):notReady(3):createAndGo(4):createAndWait(5):destroy(6),This specifies the row-status of the address-lease. Implemented values are - active(1) and destroy(6). For a valid range, the row-satus will return active(1). When it is set to destroy(6), the corresponding address-lease is cleared.
.1.3.6.1.4.1.4526.11.12.4,NETGEAR-DHCPSERVER-PRIVATE-MIB::agentDhcpServerAddressConflictGroup,,,,,,
.1.3.6.1.4.1.4526.11.12.4.1,NETGEAR-DHCPSERVER-PRIVATE-MIB::agentDhcpServerClearAllAddressConflicts,INTEGER,read-write,,current,enable(1):disable(2),Clears all the address-conflicts found by DHCP server,when set to enable.
.1.3.6.1.4.1.4526.11.12.4.2,NETGEAR-DHCPSERVER-PRIVATE-MIB::agentDhcpServerAddressConflictLogging,INTEGER,read-write,,current,enable(1):disable(2), It is used to enable, or disables the logging of address-conflicts on a DHCP Server.
.1.3.6.1.4.1.4526.11.12.4.3,NETGEAR-DHCPSERVER-PRIVATE-MIB::agentDhcpServerAddressConflictTable,,not-accessible,,current,,A table of the conflicting-address entries.
.1.3.6.1.4.1.4526.11.12.4.3.1,NETGEAR-DHCPSERVER-PRIVATE-MIB::agentDhcpServerAddressConflictEntry,,not-accessible,agentDhcpServerAddressConflictIP,current,,Represents a conflicting-address entry.
.1.3.6.1.4.1.4526.11.12.4.3.1.1,NETGEAR-DHCPSERVER-PRIVATE-MIB::agentDhcpServerAddressConflictIP,IpAddress,read-only,,current,,This specifies the conflicting IP address assigned to the client by DHCP server.
.1.3.6.1.4.1.4526.11.12.4.3.1.2,NETGEAR-DHCPSERVER-PRIVATE-MIB::agentDhcpServerAddressConflictDetectionType,INTEGER,read-only,,current,ping(1):gratuitousArp(2),This specifies the address-conflict detection-method.
.1.3.6.1.4.1.4526.11.12.4.3.1.3,NETGEAR-DHCPSERVER-PRIVATE-MIB::agentDhcpServerAddressConflictDetectionTime,TimeTicks,read-only,,current,,This specifies the sysUpTime at which the address-conflict was detected.
.1.3.6.1.4.1.4526.11.12.4.3.1.4,NETGEAR-DHCPSERVER-PRIVATE-MIB::agentDhcpServerAddressConflictStatus,INTEGER,read-write,,current,active(1):notInService(2):notReady(3):createAndGo(4):createAndWait(5):destroy(6),This specifies the row-status of the conflicting-address entry. Implemented values are - active(1) and destroy(6). For a valid range, the row-satus will return active(1). When it is set to destroy(6), the corresponding conflicting-address entry is cleared.
.1.3.6.1.4.1.4526.11.13,NETGEAR-INVENTORY-MIB::agentInventory,,,,,,This MIB defines the objects used for FastPath to  configure and report information and status of units,  slots and supported cards.
.1.3.6.1.4.1.4526.11.13.0,NETGEAR-INVENTORY-MIB::agentInventoryTraps,,,,,,
.1.3.6.1.4.1.4526.11.13.0.1,NETGEAR-INVENTORY-MIB::agentInventoryCardMismatch,,,,,,Sent when a card is inserted which is a different type than  what the slot was configured for.
.1.3.6.1.4.1.4526.11.13.0.2,NETGEAR-INVENTORY-MIB::agentInventoryCardUnsupported,,,,,,Sent when a card is inserted which is of a type that is not  supported by the slot.
.1.3.6.1.4.1.4526.11.13.0.3,NETGEAR-INVENTORY-MIB::agentInventoryStackPortLinkUp,,,,,,Sent when a Stack Port is connected to annother Stack Member.
.1.3.6.1.4.1.4526.11.13.0.4,NETGEAR-INVENTORY-MIB::agentInventoryStackPortLinkDown,,,,,,Sent when a Stack Port is disconnected from annother Stack Member.
.1.3.6.1.4.1.4526.11.13.1,NETGEAR-INVENTORY-MIB::agentInventoryStackGroup,,,,,,
.1.3.6.1.4.1.4526.11.13.1.1,NETGEAR-INVENTORY-MIB::agentInventoryStackReplicateSTK,INTEGER,read-write,,current,enable(1):disable(2),Initiates STK copy from management unit to all other management capable units in the stack.
.1.3.6.1.4.1.4526.11.13.1.2,NETGEAR-INVENTORY-MIB::agentInventoryStackReload,INTEGER,read-write,,current,enable(1):disable(2),Initiates stack reload.
.1.3.6.1.4.1.4526.11.13.1.3,NETGEAR-INVENTORY-MIB::agentInventoryStackMaxUnitNumber,Unsigned32,read-only,,current,,Indicates the maximum allowed Unit Number configurable on the stack.
.1.3.6.1.4.1.4526.11.13.1.4,NETGEAR-INVENTORY-MIB::agentInventoryStackReplicateSTKStatus,INTEGER,read-only,,current,inProgress(1):notInProgress(2):finishedWithSuccess(3):finishedWithError(4),Indicates the current status of an STK copy from management unit to all other  management capable units inthe stack.
.1.3.6.1.4.1.4526.11.13.1.5,NETGEAR-INVENTORY-MIB::agentInventoryStackSTKname,INTEGER,read-write,,current,unconfigured(1):image1(2):image2(3),STK file on management unit for copy/activate/delete operations to all units in the stack unconfigured(1) - indicates a default state and can not be set.
.1.3.6.1.4.1.4526.11.13.1.6,NETGEAR-INVENTORY-MIB::agentInventoryStackActivateSTK,INTEGER,read-write,,current,enable(1):disable(2),Activates the specified STK file on all units on the stack.
.1.3.6.1.4.1.4526.11.13.1.7,NETGEAR-INVENTORY-MIB::agentInventoryStackDeleteSTK,INTEGER,read-write,,current,enable(1):disable(2),Deletes the specified STK file from all units on the stack.
.1.3.6.1.4.1.4526.11.13.2,NETGEAR-INVENTORY-MIB::agentInventoryUnitGroup,,,,,,
.1.3.6.1.4.1.4526.11.13.2.1,NETGEAR-INVENTORY-MIB::agentInventorySupportedUnitTable,,not-accessible,,current,,TODO
.1.3.6.1.4.1.4526.11.13.2.1.1,NETGEAR-INVENTORY-MIB::agentInventorySupportedUnitEntry,,not-accessible,agentInventorySupportedUnitIndex,current,,TODO
.1.3.6.1.4.1.4526.11.13.2.1.1.1,NETGEAR-INVENTORY-MIB::agentInventorySupportedUnitIndex,Unsigned32,not-accessible,,current,,The unit identifier associated with the supported unit.
.1.3.6.1.4.1.4526.11.13.2.1.1.4,NETGEAR-INVENTORY-MIB::agentInventorySupportedUnitModelIdentifier,OCTET,read-only,,current,,The model identifier for the supported unit.
.1.3.6.1.4.1.4526.11.13.2.1.1.5,NETGEAR-INVENTORY-MIB::agentInventorySupportedUnitDescription,OCTET,read-only,,current,,The description of the supported unit.
.1.3.6.1.4.1.4526.11.13.2.1.1.6,NETGEAR-INVENTORY-MIB::agentInventorySupportedUnitExpectedCodeVer,OCTET,read-only,,current,,The expected code version.
.1.3.6.1.4.1.4526.11.13.2.2,NETGEAR-INVENTORY-MIB::agentInventoryUnitTable,,not-accessible,,current,,A table of Per-Unit configuration objects.
.1.3.6.1.4.1.4526.11.13.2.2.1,NETGEAR-INVENTORY-MIB::agentInventoryUnitEntry,,not-accessible,agentInventoryUnitNumber,current,,Each Instance corresponds with a different unit managed by this agent.
.1.3.6.1.4.1.4526.11.13.2.2.1.1,NETGEAR-INVENTORY-MIB::agentInventoryUnitNumber,Unsigned32,not-accessible,,current,,The unit number associated with this unit.
.1.3.6.1.4.1.4526.11.13.2.2.1.2,NETGEAR-INVENTORY-MIB::agentInventoryUnitAssignNumber,Unsigned32,read-create,,current,,Allows setting the unit number associated with this unit. This number must  be less than the value returned by agentInventoryStackMaxUnitNumber. Setting  this object to a non-zero value will initate changing the unit number.
.1.3.6.1.4.1.4526.11.13.2.2.1.3,NETGEAR-INVENTORY-MIB::agentInventoryUnitType,Unsigned32,read-only,,current,,The Unit Type identifier for this unit.
.1.3.6.1.4.1.4526.11.13.2.2.1.4,NETGEAR-INVENTORY-MIB::agentInventoryUnitSupportedUnitIndex,Unsigned32,read-create,,current,,The index of the unit type in agentInventorySupportedUnitTable which this unit is associated with.
.1.3.6.1.4.1.4526.11.13.2.2.1.6,NETGEAR-INVENTORY-MIB::agentInventoryUnitMgmtAdmin,INTEGER,read-create,,current,mgmtUnit(1):stackUnit(2):mgmtUnassigned(3),Indicates whether the unit is a Management Unit, a Stack Unit, or has  been configured to be a Management Unit.  Setting this object to mgmtUnit(1) initiates transfer of the  management functionality to the specified stack unit. Object values  stackUnit(2) and mgmtUnassigned(3) cannot be set.
.1.3.6.1.4.1.4526.11.13.2.2.1.7,NETGEAR-INVENTORY-MIB::agentInventoryUnitHWMgmtPref,INTEGER,read-only,,current,disabled(0):unsassigned(1):assigned(2),Indicates the default preference assigned to the unit.
.1.3.6.1.4.1.4526.11.13.2.2.1.8,NETGEAR-INVENTORY-MIB::agentInventoryUnitHWMgmtPrefValue,Unsigned32,read-only,,current,,Indicates the default preference value assigned to the unit.  The preference value indicates how likely this unit is to be  chosen as the management unit. A value of 0 indicates a disabled or unassigned preference.
.1.3.6.1.4.1.4526.11.13.2.2.1.9,NETGEAR-INVENTORY-MIB::agentInventoryUnitAdminMgmtPref,INTEGER,read-create,,current,disabled(0):unsassigned(1):assigned(2),Indicates the configured preference assigned to the unit. This object can not be set to assigned(3). Setting this object to disabled(1), or unassigned(2) will set agentInventoryUnitHWMgmtPrefValue to 0.
.1.3.6.1.4.1.4526.11.13.2.2.1.10,NETGEAR-INVENTORY-MIB::agentInventoryUnitAdminMgmtPrefValue,Unsigned32,read-create,,current,,Indicates the configured preference value assigned to the unit.  The preference value indicates how likely this unit is to be  chosen as the management unit. A value of 0 indicates a disabled or unassigned preference. Setting this object to 0 will also set agentInventoryUnitHWMgmtPref to unassigned(2). Setting this object to a non-zero value will set agentInventoryUnitHWMgmtPref to assigned(3). This value overrides the value of  agentInventoryUnitHWMgmtPref if assigned.
.1.3.6.1.4.1.4526.11.13.2.2.1.11,NETGEAR-INVENTORY-MIB::agentInventoryUnitStatus,INTEGER,read-only,,current,ok(1):unsupported(2):codeMismatch(3):configMismatch(4):notPresent(5),The unit status of this unit.
.1.3.6.1.4.1.4526.11.13.2.2.1.12,NETGEAR-INVENTORY-MIB::agentInventoryUnitDetectedCodeVer,OCTET,read-only,,current,,The version of code running on this unit. If the unit is not  detected then the code version is an empty string.
.1.3.6.1.4.1.4526.11.13.2.2.1.13,NETGEAR-INVENTORY-MIB::agentInventoryUnitDetectedCodeInFlashVer,OCTET,read-only,,current,,The version of code that is currently stored in FLASH  memory on the unit. This code will execute after the unit  is reset. If the unit is not detected then this object will  return an empty string.
.1.3.6.1.4.1.4526.11.13.2.2.1.14,NETGEAR-INVENTORY-MIB::agentInventoryUnitUpTime,TimeTicks,read-only,,current,,The system up time of the unit.
.1.3.6.1.4.1.4526.11.13.2.2.1.15,NETGEAR-INVENTORY-MIB::agentInventoryUnitDescription,OCTET,read-only,,current,,The description of the unit.
.1.3.6.1.4.1.4526.11.13.2.2.1.16,NETGEAR-INVENTORY-MIB::agentInventoryUnitReplicateSTK,INTEGER,read-write,,current,enable(1):disable(2),Initiates the specified STK file copy from management unit to this unit.
.1.3.6.1.4.1.4526.11.13.2.2.1.17,NETGEAR-INVENTORY-MIB::agentInventoryUnitReload,INTEGER,read-write,,current,enable(1):disable(2),Reload a specific unit in the stack.
.1.3.6.1.4.1.4526.11.13.2.2.1.18,NETGEAR-INVENTORY-MIB::agentInventoryUnitRowStatus,INTEGER,read-create,,current,active(1):notInService(2):notReady(3):createAndGo(4):createAndWait(5):destroy(6),The status of this unit instance. Creation of new instances requires the object agentInventoryUnitSupportedUnitIndex to be set at the same time to indicate the type  of of unit to pre-configure.  active(1) - This instance is active. createAndGo(4) - Creates a new instance. destroy(6) - Removes this instance.
.1.3.6.1.4.1.4526.11.13.2.2.1.19,NETGEAR-INVENTORY-MIB::agentInventoryUnitSerialNumber,OCTET,read-only,,current,,The Serial Number of the unit.
.1.3.6.1.4.1.4526.11.13.2.2.1.20,NETGEAR-INVENTORY-MIB::agentInventoryUnitImage1Version,OCTET,read-only,,current,,Code version for Image1.
.1.3.6.1.4.1.4526.11.13.2.2.1.21,NETGEAR-INVENTORY-MIB::agentInventoryUnitImage2Version,OCTET,read-only,,current,,Code version for Image2.
.1.3.6.1.4.1.4526.11.13.2.2.1.22,NETGEAR-INVENTORY-MIB::agentInventoryUnitSTKname,INTEGER,read-write,,current,image1(2):image2(3),STK file to be used for copy/delete/activate operatiosn.
.1.3.6.1.4.1.4526.11.13.2.2.1.23,NETGEAR-INVENTORY-MIB::agentInventoryUnitActivateSTK,INTEGER,read-write,,current,enable(1):disable(2),Activates the specified STK file on this unit.
.1.3.6.1.4.1.4526.11.13.2.2.1.24,NETGEAR-INVENTORY-MIB::agentInventoryUnitDeleteSTK,INTEGER,read-write,,current,enable(1):disable(2),Deletes the specified STK file on this unit.
.1.3.6.1.4.1.4526.11.13.3,NETGEAR-INVENTORY-MIB::agentInventorySlotGroup,,,,,,
.1.3.6.1.4.1.4526.11.13.3.1,NETGEAR-INVENTORY-MIB::agentInventorySlotTable,,not-accessible,,current,,TODO
.1.3.6.1.4.1.4526.11.13.3.1.1,NETGEAR-INVENTORY-MIB::agentInventorySlotEntry,,not-accessible,agentInventoryUnitNumber:agentInventorySlotNumber,current,,TODO
.1.3.6.1.4.1.4526.11.13.3.1.1.1,NETGEAR-INVENTORY-MIB::agentInventorySlotNumber,Unsigned32,not-accessible,,current,,An incrimental index of the slot in this unit.
.1.3.6.1.4.1.4526.11.13.3.1.1.3,NETGEAR-INVENTORY-MIB::agentInventorySlotStatus,INTEGER,read-only,,current,empty(1):full(2):error(3),Indicates the current status of the slot.
.1.3.6.1.4.1.4526.11.13.3.1.1.4,NETGEAR-INVENTORY-MIB::agentInventorySlotPowerMode,INTEGER,read-write,,current,enable(1):disable(2),Indicates whether a card in this slot will be powered on.
.1.3.6.1.4.1.4526.11.13.3.1.1.5,NETGEAR-INVENTORY-MIB::agentInventorySlotAdminMode,INTEGER,read-write,,current,enable(1):disable(2),Indicates whether this card is administratively enabled or  disabled.
.1.3.6.1.4.1.4526.11.13.3.1.1.6,NETGEAR-INVENTORY-MIB::agentInventorySlotInsertedCardType,Unsigned32,read-only,,current,,Indicates the inserted card type. Will return 0 if the slot is  not full.
.1.3.6.1.4.1.4526.11.13.3.1.1.7,NETGEAR-INVENTORY-MIB::agentInventorySlotConfiguredCardType,Unsigned32,read-write,,current,,Indicates the configured card type. This object may be set with a corresponding value of agentInventoryCardType if this slot supports removable cards.
.1.3.6.1.4.1.4526.11.13.3.1.1.8,NETGEAR-INVENTORY-MIB::agentInventorySlotCapabilities,BITS,read-only,,current,pluggable(0):power-down(1),Indicates the different capabilities this slot has.  pluggable(0) - This slot can contain pluggable cards. power-down(1) - Power to this slot can be controlled through the object agentInventorySlotPowerMode 
.1.3.6.1.4.1.4526.11.13.4,NETGEAR-INVENTORY-MIB::agentInventoryCardGroup,,,,,,
.1.3.6.1.4.1.4526.11.13.4.1,NETGEAR-INVENTORY-MIB::agentInventoryCardTypeTable,,not-accessible,,current,,Contains information for all supported Card Types in the system.
.1.3.6.1.4.1.4526.11.13.4.1.1,NETGEAR-INVENTORY-MIB::agentInventoryCardTypeEntry,,not-accessible,agentInventoryCardIndex,current,,Contains information related to a specific Card Type.
.1.3.6.1.4.1.4526.11.13.4.1.1.1,NETGEAR-INVENTORY-MIB::agentInventoryCardIndex,Unsigned32,not-accessible,,current,,An arbitrary index used to identify cards in the table.
.1.3.6.1.4.1.4526.11.13.4.1.1.2,NETGEAR-INVENTORY-MIB::agentInventoryCardType,Unsigned32,read-only,,current,,The Card Type associated with this instance.
.1.3.6.1.4.1.4526.11.13.4.1.1.3,NETGEAR-INVENTORY-MIB::agentInventoryCardModelIdentifier,OCTET,read-only,,current,,The model identifier for the supported Card Type.
.1.3.6.1.4.1.4526.11.13.4.1.1.4,NETGEAR-INVENTORY-MIB::agentInventoryCardDescription,OCTET,read-only,,current,,The card description for the supported Card Type.
.1.3.6.1.4.1.4526.11.13.5,NETGEAR-INVENTORY-MIB::agentInventoryComponentGroup,,,,,,
.1.3.6.1.4.1.4526.11.13.5.1,NETGEAR-INVENTORY-MIB::agentInventoryComponentTable,,not-accessible,,current,,Contains information for all supported Components in the system.
.1.3.6.1.4.1.4526.11.13.5.1.1,NETGEAR-INVENTORY-MIB::agentInventoryComponentEntry,,not-accessible,agentInventoryComponentIndex,current,,Contains information related to a specific Components.
.1.3.6.1.4.1.4526.11.13.5.1.1.1,NETGEAR-INVENTORY-MIB::agentInventoryComponentIndex,Unsigned32,not-accessible,,current,,An arbitrary index used to reference components in the table.
.1.3.6.1.4.1.4526.11.13.5.1.1.2,NETGEAR-INVENTORY-MIB::agentInventoryComponentMnemonic,OCTET,read-only,,current,,The abreviated name of this component.
.1.3.6.1.4.1.4526.11.13.5.1.1.3,NETGEAR-INVENTORY-MIB::agentInventoryComponentName,OCTET,read-only,,current,,The name of the component for this instance.
.1.3.6.1.4.1.4526.11.13.6,NETGEAR-INVENTORY-MIB::agentInventoryConformance,,,,,,
.1.3.6.1.4.1.4526.11.13.6.1,NETGEAR-INVENTORY-MIB::agentInventoryCompliances,,,,,,
.1.3.6.1.4.1.4526.11.13.6.1.1,NETGEAR-INVENTORY-MIB::agentInventoryCompliance,,,,,,The compliance statement for SNMP entities which implement version 1 of the agentInventory MIB.
.1.3.6.1.4.1.4526.11.13.6.1.2,NETGEAR-INVENTORY-MIB::agentInventoryCompliance2,,,,,,The compliance statement for SNMP entities which implement version 2 of the agentInventory MIB.
.1.3.6.1.4.1.4526.11.13.6.2,NETGEAR-INVENTORY-MIB::agentInventoryGroups,,,,,,
.1.3.6.1.4.1.4526.11.13.6.2.1,NETGEAR-INVENTORY-MIB::agentInventorySupportedUnitGroup,,,,,,The collection of objects which are used to represent multiple units in the stack.
.1.3.6.1.4.1.4526.11.13.6.2.2,NETGEAR-INVENTORY-MIB::agentInventoryUnitComplianceGroup,,,,,,The collection of objects which are used to represent multiple units in the stack.
.1.3.6.1.4.1.4526.11.13.6.2.3,NETGEAR-INVENTORY-MIB::agentInventorySlotComplianceGroup,,,,,,The collection of objects which are used to represent slots in the each unit managed by this agent.
.1.3.6.1.4.1.4526.11.13.6.2.4,NETGEAR-INVENTORY-MIB::agentInventoryCardComplianceGroup,,,,,,The collection of objects which are used to represent the card types this system can manage.
.1.3.6.1.4.1.4526.11.13.6.2.5,NETGEAR-INVENTORY-MIB::agentInventoryNotificationsGroup,,,,,,The collection of notifications used to indicate problems associated with the insertion of cards.
.1.3.6.1.4.1.4526.11.13.7,NETGEAR-INVENTORY-MIB::agentInventoryStackPortGroup,,,,,,
.1.3.6.1.4.1.4526.11.13.7.1,NETGEAR-INVENTORY-MIB::agentInventoryStackPortIpTelephonyQOSSupport,INTEGER,read-write,,current,enable(1):disable(2),Controls whether the Stack Ports give higher priority to IP Telephony traffic.
.1.3.6.1.4.1.4526.11.13.7.2,NETGEAR-INVENTORY-MIB::agentInventoryStackPortTable,,not-accessible,,current,,Contains information for all Stack Ports present in the system.
.1.3.6.1.4.1.4526.11.13.7.2.1,NETGEAR-INVENTORY-MIB::agentInventoryStackPortEntry,,not-accessible,agentInventoryStackPortIndex,current,,Contains information related to a specific Stack Port.
.1.3.6.1.4.1.4526.11.13.7.2.1.1,NETGEAR-INVENTORY-MIB::agentInventoryStackPortIndex,Unsigned32,not-accessible,,current,,An arbitrary index used to reference Stack Ports in the table.
.1.3.6.1.4.1.4526.11.13.7.2.1.2,NETGEAR-INVENTORY-MIB::agentInventoryStackPortUnit,Unsigned32,read-only,,current,,The Unit Index this Stack Port is physically located on.
.1.3.6.1.4.1.4526.11.13.7.2.1.3,NETGEAR-INVENTORY-MIB::agentInventoryStackPortTag,OCTET,read-only,,current,,The name of the Stack Port for this instance.
.1.3.6.1.4.1.4526.11.13.7.2.1.4,NETGEAR-INVENTORY-MIB::agentInventoryStackPortConfiguredStackMode,INTEGER,read-write,,current,stack(1):ethernet(2),Configured mode of the Stack Port. Changes to this value happen only after a reset of the switch.
.1.3.6.1.4.1.4526.11.13.7.2.1.5,NETGEAR-INVENTORY-MIB::agentInventoryStackPortRunningStackMode,INTEGER,read-only,,current,stack(1):ethernet(2),Currently operational mode of the Stack Port.
.1.3.6.1.4.1.4526.11.13.7.2.1.6,NETGEAR-INVENTORY-MIB::agentInventoryStackPortLinkStatus,INTEGER,read-only,,current,up(1):down(2),Link status of the Stack Port. Ports which are in ethernet mode will return a status of down(2).
.1.3.6.1.4.1.4526.11.13.7.2.1.7,NETGEAR-INVENTORY-MIB::agentInventoryStackPortLinkSpeed,Gauge32,read-only,,current,,Speed of the Stack Port measured in Gb/s. Ports which are in ethernet mode will return a speed of 0.
.1.3.6.1.4.1.4526.11.13.7.2.1.8,NETGEAR-INVENTORY-MIB::agentInventoryStackPortDataRate,Counter32,read-only,,current,,Approximate data rate on the stacking port. Measured in Gb/s. Ports which are in ethernet mode will return 0.
.1.3.6.1.4.1.4526.11.13.7.2.1.9,NETGEAR-INVENTORY-MIB::agentInventoryStackPortErrorRate,Counter32,read-only,,current,,Approximate error rate on the stack port. Measured in Errors  per Second. Ports which are in ethernet mode will return 0.
.1.3.6.1.4.1.4526.11.13.7.2.1.10,NETGEAR-INVENTORY-MIB::agentInventoryStackPortTotalErrors,Counter32,read-only,,current,,Number of errors since boot. The counter may wrap. Ports  which are in ethernet mode will return 0.
.1.3.6.1.4.1.4526.11.14,NETGEAR-LOGGING-MIB::agentLogging,,,,,,This MIB provides objects to configure and display events logged on this system.
.1.3.6.1.4.1.4526.11.14.1,NETGEAR-LOGGING-MIB::agentLogConfigGroup,,,,,,
.1.3.6.1.4.1.4526.11.14.1.1,NETGEAR-LOGGING-MIB::agentLogInMemoryConfigGroup,,,,,,
.1.3.6.1.4.1.4526.11.14.1.1.1,NETGEAR-LOGGING-MIB::agentLogInMemoryAdminStatus,INTEGER,read-write,,current,enable(1):disable(2),Administratively enable/disable the In Memory log.
.1.3.6.1.4.1.4526.11.14.1.1.4,NETGEAR-LOGGING-MIB::agentLogInMemoryBehavior,INTEGER,read-write,,current,wrap(1):stop-on-full(2),Configures the behavior of the In Memory Log when it becomes full. A value of wrap(1) will cause the oldest log message to be removed, making room for the new message. A value of stop-on-full(2) will prevent any further logging.
.1.3.6.1.4.1.4526.11.14.1.2,NETGEAR-LOGGING-MIB::agentLogConsoleConfigGroup,,,,,,
.1.3.6.1.4.1.4526.11.14.1.2.1,NETGEAR-LOGGING-MIB::agentLogConsoleAdminStatus,INTEGER,read-write,,current,enable(1):disable(2),Admin mode for console logs
.1.3.6.1.4.1.4526.11.14.1.2.2,NETGEAR-LOGGING-MIB::agentLogConsoleSeverityFilter,INTEGER,read-write,,current,emergency(0):alert(1):critical(2):error(3):warning(4):notice(5):informational(6):debug(7),Severity filter for console logs
.1.3.6.1.4.1.4526.11.14.1.3,NETGEAR-LOGGING-MIB::agentLogPersistentConfigGroup,,,,,,
.1.3.6.1.4.1.4526.11.14.1.3.1,NETGEAR-LOGGING-MIB::agentLogPersistentAdminStatus,INTEGER,read-write,,current,enable(1):disable(2),This control disables/enables logging for the persistent startup log. Setting this  value to disable does not clear the current contents of the log.
.1.3.6.1.4.1.4526.11.14.1.3.2,NETGEAR-LOGGING-MIB::agentLogPersistentSeverityFilter,INTEGER,read-write,,current,emergency(0):alert(1):critical(2):error(3):warning(4):notice(5):informational(6):debug(7),This control specifies the minimum severity to log to the startup and operation log.  Messages with an equal or lower numerical severity are logged.
.1.3.6.1.4.1.4526.11.14.1.4,NETGEAR-LOGGING-MIB::agentLogSysLogConfigGroup,,,,,,
.1.3.6.1.4.1.4526.11.14.1.4.1,NETGEAR-LOGGING-MIB::agentLogSyslogAdminStatus,INTEGER,read-write,,current,enable(1):disable(2),For Enabling and Disabling logging to configured syslog hosts. Setting this to disable  stops logging to all syslog hosts.
.1.3.6.1.4.1.4526.11.14.1.4.3,NETGEAR-LOGGING-MIB::agentLogSyslogLocalPort,Unsigned32,read-write,,current,,This is the port on the local host from which syslog messages are sent.
.1.3.6.1.4.1.4526.11.14.1.4.4,NETGEAR-LOGGING-MIB::agentLogSyslogMaxHosts,Unsigned32,read-only,,current,,Maximum number of hosts that can be configured for logging syslog messages.
.1.3.6.1.4.1.4526.11.14.1.4.5,NETGEAR-LOGGING-MIB::agentLogSyslogHostTable,,not-accessible,,current,,Syslog host table containing syslog host entries.
.1.3.6.1.4.1.4526.11.14.1.4.5.1,NETGEAR-LOGGING-MIB::agentLogSyslogHostEntry,,not-accessible,agentLogHostTableIndex,current,,Syslog Host entry attributes.
.1.3.6.1.4.1.4526.11.14.1.4.5.1.1,NETGEAR-LOGGING-MIB::agentLogHostTableIndex,Unsigned32,not-accessible,,current,,Index to syslog host entry in syslog host table.
.1.3.6.1.4.1.4526.11.14.1.4.5.1.2,NETGEAR-LOGGING-MIB::agentLogHostTableIpAddress,OCTET,read-create,,current,,Syslog Host table IP Address.
.1.3.6.1.4.1.4526.11.14.1.4.5.1.3,NETGEAR-LOGGING-MIB::agentLogHostTableIpAddressType,INTEGER,read-create,,current,unknown(0):ipv4(1):ipv6(2):ipv4z(3):ipv6z(4):dns(16),Syslog Host table IP Address Type.
.1.3.6.1.4.1.4526.11.14.1.4.5.1.4,NETGEAR-LOGGING-MIB::agentLogHostTablePort,Unsigned32,read-create,,current,,Syslog Host table port number.
.1.3.6.1.4.1.4526.11.14.1.4.5.1.5,NETGEAR-LOGGING-MIB::agentLogHostTableSeverityFilter,INTEGER,read-create,,current,emergency(0):alert(1):critical(2):error(3):warning(4):notice(5):informational(6):debug(7),Configures the minimum severity that will be stored in the In Memory log.
.1.3.6.1.4.1.4526.11.14.1.4.5.1.6,NETGEAR-LOGGING-MIB::agentLogHostTableRowStatus,INTEGER,read-create,,current,active(1):notInService(2):notReady(3):createAndGo(4):createAndWait(5):destroy(6),Syslog Host table row status
.1.3.6.1.4.1.4526.11.14.1.5,NETGEAR-LOGGING-MIB::agentLogCliCommandsConfigGroup,,,,,,
.1.3.6.1.4.1.4526.11.14.1.5.1,NETGEAR-LOGGING-MIB::agentLogCliCommandsAdminStatus,INTEGER,read-write,,current,enable(1):disable(2),Administratively enable/disable the logging of the CLI Commands 
.1.3.6.1.4.1.4526.11.14.2,NETGEAR-LOGGING-MIB::agentLogStatisticsGroup,,,,,,
.1.3.6.1.4.1.4526.11.14.2.1,NETGEAR-LOGGING-MIB::agentLogMessagesReceived,Counter32,read-only,,current,,The number of messages received by the log process. This includes messages that are  dropped or ignored.
.1.3.6.1.4.1.4526.11.14.2.2,NETGEAR-LOGGING-MIB::agentLogMessagesDropped,Counter32,read-only,,current,,The number of messages that could not be processed due to error or lack of resources.
.1.3.6.1.4.1.4526.11.14.2.3,NETGEAR-LOGGING-MIB::agentLogSyslogMessagesRelayed,Counter32,read-only,,current,,The number of messages forwarded by the syslog function to a syslog host. Messages forwarded  to multiple hosts are counted once for each host.
.1.3.6.1.4.1.4526.11.14.2.4,NETGEAR-LOGGING-MIB::agentLogSyslogMessagesIgnored,Counter32,read-only,,deprecated,,The number of messages that were not processed by the syslog process because the component name  or the priority level did not match any specification.
.1.3.6.1.4.1.4526.11.14.2.5,NETGEAR-LOGGING-MIB::agentLogMessageReceivedTime,OCTET,read-only,,current,,The local time when a message was last received by the log subsystem specified as the number of  non-leap seconds since 00:00:00 UTC on January 1 1970.
.1.3.6.1.4.1.4526.11.14.2.6,NETGEAR-LOGGING-MIB::agentLogSyslogMessageDeliveredTime,OCTET,read-only,,current,,The local time when a message was last delivered to a syslog host specified as the number of non-leap  seconds since 00:00:00 UTC on January 1 1970.
.1.3.6.1.4.1.4526.11.14.3,NETGEAR-LOGGING-MIB::agentLogInMemoryGroup,,,,,,
.1.3.6.1.4.1.4526.11.14.3.1,NETGEAR-LOGGING-MIB::agentLogInMemoryLogCount,Gauge32,read-only,,current,,The count of valid entries in the in-memory log.
.1.3.6.1.4.1.4526.11.14.3.2,NETGEAR-LOGGING-MIB::agentLogInMemoryTable,,not-accessible,,current,,The in-memory log table containing sequence of in-memory log entries.
.1.3.6.1.4.1.4526.11.14.3.2.1,NETGEAR-LOGGING-MIB::agentLogInMemoryEntry,,not-accessible,agentLogInMemoryMsgIndex,current,,An individual message entry in in-memory log table.
.1.3.6.1.4.1.4526.11.14.3.2.1.1,NETGEAR-LOGGING-MIB::agentLogInMemoryMsgIndex,Unsigned32,not-accessible,,current,,The index to message entry in the in-memory log table.
.1.3.6.1.4.1.4526.11.14.3.2.1.2,NETGEAR-LOGGING-MIB::agentLogInMemoryMsgText,OCTET,read-only,,current,,Message text info for inmemory logged messages.
.1.3.6.1.4.1.4526.11.14.4,NETGEAR-LOGGING-MIB::agentLogPersistentGroup,,,,,,
.1.3.6.1.4.1.4526.11.14.4.1,NETGEAR-LOGGING-MIB::agentLogPersistentLogCount,Counter32,read-only,,current,,The count of valid entries in the persistent log.
.1.3.6.1.4.1.4526.11.14.4.4,NETGEAR-LOGGING-MIB::agentLogPersistentTable,,not-accessible,,current,,Table for storing persistent log messages.
.1.3.6.1.4.1.4526.11.14.4.4.1,NETGEAR-LOGGING-MIB::agentLogPersistentEntry,,not-accessible,agentLogMsgPersistentMsgIndex,current,,Log entry details for logging message in persistent log table.
.1.3.6.1.4.1.4526.11.14.4.4.1.1,NETGEAR-LOGGING-MIB::agentLogMsgPersistentMsgIndex,Unsigned32,not-accessible,,current,,Table index for logging message in persistent log table.
.1.3.6.1.4.1.4526.11.14.4.4.1.2,NETGEAR-LOGGING-MIB::agentLogMsgPersistentMsgText,OCTET,read-only,,current,,The text corresponding to persistent log message.
.1.3.6.1.4.1.4526.11.17,NETGEAR-SNTP-CLIENT-MIB::agentSntpClientMIB,,,,,,This MIB module defines a portion of the SNMP MIB under the Netgear enterprise OID pertaining to SNTP client configuration and statistical collection.
.1.3.6.1.4.1.4526.11.17.1,NETGEAR-SNTP-CLIENT-MIB::agentSntpClientObjects,,,,,,
.1.3.6.1.4.1.4526.11.17.1.1,NETGEAR-SNTP-CLIENT-MIB::agentSntpClient,,,,,,
.1.3.6.1.4.1.4526.11.17.1.1.1,NETGEAR-SNTP-CLIENT-MIB::agentSntpClientVersion,INTEGER,read-only,,current,version1(1):version2(2):version3(3):version4(4),The highest SNTP version this client supports. Per RFC 2030, higher versions are required to be backwards compatible with all lower versions with the exception of version 0.
.1.3.6.1.4.1.4526.11.17.1.1.2,NETGEAR-SNTP-CLIENT-MIB::agentSntpClientSupportedMode,BITS,read-only,,current,disabled(0):unicast(1):broadcast(2):multicast(3),The SNTP client administrative modes that this device supports. A client may support more than one administrative mode.
.1.3.6.1.4.1.4526.11.17.1.1.3,NETGEAR-SNTP-CLIENT-MIB::agentSntpClientMode,INTEGER,read-write,,current,disabled(0):unicast(1):broadcast(2):multicast(3),The current administrative mode of the SNTP client. A SET of this object will cause the SNTP client to change administrative modes. A SET request MUST have only 1 bit set since is not possible to operate in multiple modes simultaneously. SETs of this object are limited to values supported by the device as specified by agentSntpClientSupportedMode.
.1.3.6.1.4.1.4526.11.17.1.1.4,NETGEAR-SNTP-CLIENT-MIB::agentSntpClientPort,Unsigned32,read-write,,current,,The local port number used to listen for broadcasts and responses from servers. A set request MUST NOT use a value of 0 for this object.
.1.3.6.1.4.1.4526.11.17.1.1.5,NETGEAR-SNTP-CLIENT-MIB::agentSntpClientLastUpdateTime,OCTET,read-only,,current,,The local date and time that the SNTP client last updated the system time on the device since agent reboot. This time is updated for all non-disabled administrative modes of the SNTP client. If the SNTP client has not updated the time then the client MUST return '00000000'H.
.1.3.6.1.4.1.4526.11.17.1.1.6,NETGEAR-SNTP-CLIENT-MIB::agentSntpClientLastAttemptTime,OCTET,read-only,,current,,The local date and time of the last SNTP request or unsolicited SNTP message for this SNTP client since agent reboot. This value is a timestamp for the agentSntpClientLastAttemptStatus object. When the agentSntpClientLastAttemptStatus has a value of success(2), this object's value should be equal to the value returned by agentSntpClientLastUpdateTime. If no SNTP frames have been processed by the SNTP client then the client MUST return '00000000'H. This object is updated for all non-disabled administrative modes of the SNTP client.
.1.3.6.1.4.1.4526.11.17.1.1.7,NETGEAR-SNTP-CLIENT-MIB::agentSntpClientLastAttemptStatus,INTEGER,read-only,,current,other(1):success(2):requestTimedOut(3):badDateEncoded(4):versionNotSupported(5):serverUnsychronized(6):serverKissOfDeath(7),The status of the last SNTP request or unsolicited SNTP message for this SNTP client since agent reboot. The status is updated for all non-disabled administrative modes of the SNTP client.
.1.3.6.1.4.1.4526.11.17.1.1.8,NETGEAR-SNTP-CLIENT-MIB::agentSntpClientServerAddressType,INTEGER,read-only,,current,unknown(0):ipv4(1):ipv6(2):ipv4z(3):ipv6z(4):dns(16),The address type of the SNTP server as identified by the last received packet. Support for all address types is NOT REQUIRED.
.1.3.6.1.4.1.4526.11.17.1.1.9,NETGEAR-SNTP-CLIENT-MIB::agentSntpClientServerAddress,OCTET,read-only,,current,,The encoded address of the SNTP server as identified by the last received packet.
.1.3.6.1.4.1.4526.11.17.1.1.10,NETGEAR-SNTP-CLIENT-MIB::agentSntpClientServerMode,Unsigned32,read-only,,current,,This is a 3-bit integer identifying the mode of the server as indicated in the last received packet with values defined as follows: Mode Meaning ------------------------------------ 0 reserved 1 symmetric active 2 symmetric passive 3 client 4 server 5 broadcast 6 reserved for NTP control message 7 reserved for private use 
.1.3.6.1.4.1.4526.11.17.1.1.11,NETGEAR-SNTP-CLIENT-MIB::agentSntpClientServerStratum,Unsigned32,read-only,,current,,This is an 8-bit integer identifying the stratum of the server as indicated in the last received packet with values defined as follows: Stratum Meaning ------------------------------------ 0 unspecified 1 primary reference 2-15 secondary reference 16-255 reserved
.1.3.6.1.4.1.4526.11.17.1.1.12,NETGEAR-SNTP-CLIENT-MIB::agentSntpClientServerRefClkId,OCTET,read-only,,current,,This is the value of the Reference Identifier in the last received packet defined as follows. Reference Identifier: This is a 32-bit bitstring identifying the particular reference source. In the case of NTP Version 3 or Version 4 stratum-0 (unspecified) or stratum-1 (primary) servers, this is a four-character ASCII string, left justified and zero padded to 32 bits. In NTP Version 3 secondary servers, this is the 32-bit IPv4 address of the reference source. In NTP Version 4 secondary servers, this is the low order 32 bits of the latest transmit timestamp of the reference source.
.1.3.6.1.4.1.4526.11.17.1.2,NETGEAR-SNTP-CLIENT-MIB::agentSntpClientUnicast,,,,,,
.1.3.6.1.4.1.4526.11.17.1.2.1,NETGEAR-SNTP-CLIENT-MIB::agentSntpClientUnicastPollInterval,Unsigned32,read-write,,current,,The minimum number of seconds between successive SNTP polls of the server in seconds as a power of two. This polling interval is used for SNTP requests in unicast(1) administrative mode.
.1.3.6.1.4.1.4526.11.17.1.2.2,NETGEAR-SNTP-CLIENT-MIB::agentSntpClientUnicastPollTimeout,Unsigned32,read-write,,current,,The number of seconds to wait for a response from a SNTP server before considering the attempt to have 'timed out'. This timeout is used for SNTP requests in unicast(1) administrative mode.
.1.3.6.1.4.1.4526.11.17.1.2.3,NETGEAR-SNTP-CLIENT-MIB::agentSntpClientUnicastPollRetry,Unsigned32,read-write,,current,,The number of times to retry a request to the same SNTP server that has 'timed out.'. This retry count is used for directed SNTP requests in unicast(1) administrative mode. For example, assume this object has been SET to a value of 2. When the SNTP client queries a given server it will send 1 SNTP request frame. If that original attempt fails, the client will retry up to a maximum of 2 more times before declaring the unicast poll unsuccessful and attempting the next server.
.1.3.6.1.4.1.4526.11.17.1.2.4,NETGEAR-SNTP-CLIENT-MIB::agentSntpClientUcastServerMaxEntries,Unsigned32,read-only,,current,,The maximum number of server entries that are allowed in the agentSntpClientUcastServerTable.
.1.3.6.1.4.1.4526.11.17.1.2.5,NETGEAR-SNTP-CLIENT-MIB::agentSntpClientUcastServerCurrEntries,Gauge32,read-only,,current,,The current number of server entries in the agentSntpClientUcastServerTable.
.1.3.6.1.4.1.4526.11.17.1.2.6,NETGEAR-SNTP-CLIENT-MIB::agentSntpClientUcastServerTable,,not-accessible,,current,,A table containing configuration and statistical information for unicast SNTP servers. Each server entry is represented by single conceptual row in this table.
.1.3.6.1.4.1.4526.11.17.1.2.6.1,NETGEAR-SNTP-CLIENT-MIB::agentSntpClientUcastServerEntry,,not-accessible,agentSntpClientUcastServerIndex,current,,Information for a particular unicast SNTP server.
.1.3.6.1.4.1.4526.11.17.1.2.6.1.1,NETGEAR-SNTP-CLIENT-MIB::agentSntpClientUcastServerIndex,Unsigned32,not-accessible,,current,,This object uniquely identifies the entry in the table.
.1.3.6.1.4.1.4526.11.17.1.2.6.1.2,NETGEAR-SNTP-CLIENT-MIB::agentSntpClientUcastServerAddressType,INTEGER,read-create,,current,unknown(0):ipv4(1):ipv6(2):ipv4z(3):ipv6z(4):dns(16),This object specifies how agentSntpClientUcastServerAddr is encoded. Support for all possible enumerations defined by InetAddressType is NOT REQUIRED.
.1.3.6.1.4.1.4526.11.17.1.2.6.1.3,NETGEAR-SNTP-CLIENT-MIB::agentSntpClientUcastServerAddress,OCTET,read-create,,current,,The encoded internet address of an SNTP server. Unicast SNTP requests will be sent to this address. If this address is a DNS hostname, then that hostname SHOULD be resolved into an IP address each time a SNTP request is sent to it.
.1.3.6.1.4.1.4526.11.17.1.2.6.1.4,NETGEAR-SNTP-CLIENT-MIB::agentSntpClientUcastServerPort,Unsigned32,read-create,,current,,The port number on the server to which poll requests are sent. A set request MUST NOT use a value of 0 for this object.
.1.3.6.1.4.1.4526.11.17.1.2.6.1.5,NETGEAR-SNTP-CLIENT-MIB::agentSntpClientUcastServerVersion,INTEGER,read-create,,current,version1(1):version2(2):version3(3):version4(4),The SNTP version this server supports. This is the value that will be encoded in NTP polls when operating in unicast(1) administrative mode.
.1.3.6.1.4.1.4526.11.17.1.2.6.1.6,NETGEAR-SNTP-CLIENT-MIB::agentSntpClientUcastServerPrecedence,Unsigned32,read-create,,current,,The precedence that this server has in relation to its peers in the determining the sequence of servers to which SNTP requests will be sent. The client continues sending requests to different servers until a successful response is received or all servers are exhausted. This object indicates the order in which to query the servers. A server entry with a precedence of 1 will be queried before a server with a precedence of 2, and so forth. If more than one server has the same precedence then the request order will follow the lexicographical ordering of the entries in this table.
.1.3.6.1.4.1.4526.11.17.1.2.6.1.7,NETGEAR-SNTP-CLIENT-MIB::agentSntpClientUcastServerLastUpdateTime,OCTET,read-only,,current,,The local date and time that the response from this server was used to update the system time on the device since agent reboot. If the SNTP client has not updated the time using a response from this server then this object MUST return '00000000'H.
.1.3.6.1.4.1.4526.11.17.1.2.6.1.8,NETGEAR-SNTP-CLIENT-MIB::agentSntpClientUcastServerLastAttemptTime,OCTET,read-only,,current,,The local date and time that this SNTP server was last queried since agent reboot. Essentially, this value is a timestamp for the agentSntpClientUcastServerLastAttemptStatus object. If this server has not been queried then this object MUST return '00000000'H.
.1.3.6.1.4.1.4526.11.17.1.2.6.1.9,NETGEAR-SNTP-CLIENT-MIB::agentSntpClientUcastServerLastAttemptStatus,INTEGER,read-only,,current,other(1):success(2):requestTimedOut(3):badDateEncoded(4):versionNotSupported(5):serverUnsychronized(6):serverKissOfDeath(7),The status of the last SNTP request to this server since agent reboot. If no requests have been made then this object should return 'other'.
.1.3.6.1.4.1.4526.11.17.1.2.6.1.10,NETGEAR-SNTP-CLIENT-MIB::agentSntpClientUcastServerNumRequests,Counter32,read-only,,current,,The number of SNTP requests made to this server since the last agent reboot. This includes retry attempts to the server.
.1.3.6.1.4.1.4526.11.17.1.2.6.1.11,NETGEAR-SNTP-CLIENT-MIB::agentSntpClientUcastServerNumFailedRequests,Counter32,read-only,,current,,The number of SNTP requests made to this server that did not result in a successful response since the last agent reboot. This includes retry attempts to the server.
.1.3.6.1.4.1.4526.11.17.1.2.6.1.12,NETGEAR-SNTP-CLIENT-MIB::agentSntpClientUcastServerRowStatus,INTEGER,read-create,,current,active(1):notInService(2):notReady(3):createAndGo(4):createAndWait(5):destroy(6),The row status of this conceptual row in the table. active - The server is available for use in SNTP client operations. Other writable leaves in this table MAY be modified while the row is in the active state. notInService - The entry is fully configured but is not available for use in SNTP client operations. The agent MAY transition a row from the active to notInService upon receipt of a kiss of death packet from the server. createAndGo - This is the preferred mechanism for creating conceptual rows in this table. This value can never be read as the row will always transition immediately to either active or notInService. destroy - This will remove the conceptual row from the table and make it unavailable for SNTP client operations. 
.1.3.6.1.4.1.4526.11.17.1.3,NETGEAR-SNTP-CLIENT-MIB::agentSntpClientBroadcast,,,,,,
.1.3.6.1.4.1.4526.11.17.1.3.1,NETGEAR-SNTP-CLIENT-MIB::agentSntpClientBroadcastCount,Counter32,read-only,,current,,The number of unsolicited broadcast SNTP messages that have been received and processed by the SNTP client. Unsolicited SNTP broadcast frames will not be counted unless the SNTP agent is operating in broadcast(3) mode, as specified by agentSntpClientMode.
.1.3.6.1.4.1.4526.11.17.1.3.2,NETGEAR-SNTP-CLIENT-MIB::agentSntpClientBroadcastInterval,Unsigned32,read-write,,current,,The number of seconds the client will wait before processing another broadcast packet expressed as a power of two. Packets received during the wait interval are silently discarded.
.1.3.6.1.4.1.4526.11.17.2,NETGEAR-SNTP-CLIENT-MIB::agentSntpClientConformance,,,,,,
.1.3.6.1.4.1.4526.11.17.2.1,NETGEAR-SNTP-CLIENT-MIB::agentSntpClientGroups,,,,,,
.1.3.6.1.4.1.4526.11.17.2.1.1,NETGEAR-SNTP-CLIENT-MIB::agentSntpClientDeviceGroup,,,,,,A collection of objects providing device level control of an SNTP client on FASTPATH enabled devices.
.1.3.6.1.4.1.4526.11.17.2.1.2,NETGEAR-SNTP-CLIENT-MIB::agentSntpClientUnicastGroup,,,,,,A collection of objects providing control and statistics for an SNTP client capable of operating in unicast mode.
.1.3.6.1.4.1.4526.11.17.2.1.3,NETGEAR-SNTP-CLIENT-MIB::agentSntpClientBroadcastGroup,,,,,,A collection of objects providing control and statistics for an SNTP client capable of operating in broadcast mode.
.1.3.6.1.4.1.4526.11.17.2.2,NETGEAR-SNTP-CLIENT-MIB::agentSntpClientCompliances,,,,,,
.1.3.6.1.4.1.4526.11.17.2.2.1,NETGEAR-SNTP-CLIENT-MIB::agentSntpClientCompliance,,,,,,The compliance statement for devices that support agentSntpClient.
.1.3.6.1.4.1.4526.11.19,NETGEAR-OUTBOUNDTELNET-PRIVATE-MIB::agentOutboundTelnetPrivate,,,,,,The Netgear Private MIB for Outbound Telnet
.1.3.6.1.4.1.4526.11.19.1,NETGEAR-OUTBOUNDTELNET-PRIVATE-MIB::agentOutboundTelnetGroup,,,,,,
.1.3.6.1.4.1.4526.11.19.1.1,NETGEAR-OUTBOUNDTELNET-PRIVATE-MIB::agentOutboundTelnetAdminMode,INTEGER,read-write,,current,enable(1):disable(2), Admin-mode of the Outbound Telnet.
.1.3.6.1.4.1.4526.11.19.1.2,NETGEAR-OUTBOUNDTELNET-PRIVATE-MIB::agentOutboundTelnetMaxNoOfSessions,INTEGER,read-write,,current,, The maximum no. of Outbound Telnet sessions allowed.
.1.3.6.1.4.1.4526.11.19.1.3,NETGEAR-OUTBOUNDTELNET-PRIVATE-MIB::agentOutboundTelnetTimeout,INTEGER,read-write,,current,, The login inactivity timeout value for Outbound Telnet.
.1.3.6.1.4.1.4526.11.20,NETGEAR-PORTSECURITY-PRIVATE-MIB::agentPortSecurity,,,,,,The Netgear Private MIB for Port Security Feature.
.1.3.6.1.4.1.4526.11.20.1,NETGEAR-PORTSECURITY-PRIVATE-MIB::agentPortSecurityGroup,,,,,,
.1.3.6.1.4.1.4526.11.20.1.1,NETGEAR-PORTSECURITY-PRIVATE-MIB::agentGlobalPortSecurityMode,INTEGER,read-write,,current,enable(1):disable(2),Mode showing whether at the global level, port security is enabled or not.
.1.3.6.1.4.1.4526.11.20.1.2,NETGEAR-PORTSECURITY-PRIVATE-MIB::agentPortSecurityTable,,not-accessible,,current,,A table for Port Security and associated functionality.
.1.3.6.1.4.1.4526.11.20.1.2.1,NETGEAR-PORTSECURITY-PRIVATE-MIB::agentPortSecurityEntry,,not-accessible,ifIndex,current,,Represents entry for port security table
.1.3.6.1.4.1.4526.11.20.1.2.1.1,NETGEAR-PORTSECURITY-PRIVATE-MIB::agentPortSecurityMode,INTEGER,read-write,,current,enable(1):disable(2),Mode showing whether at port level security is enabled or not.
.1.3.6.1.4.1.4526.11.20.1.2.1.2,NETGEAR-PORTSECURITY-PRIVATE-MIB::agentPortSecurityDynamicLimit,Unsigned32,read-write,,current,,This variable signifies the limit of dynamically locked MAC addresses 
.1.3.6.1.4.1.4526.11.20.1.2.1.3,NETGEAR-PORTSECURITY-PRIVATE-MIB::agentPortSecurityStaticLimit,Unsigned32,read-write,,current,,This variable signifies the limit of statically locked MAC addresses 
.1.3.6.1.4.1.4526.11.20.1.2.1.4,NETGEAR-PORTSECURITY-PRIVATE-MIB::agentPortSecurityViolationTrapMode,INTEGER,read-write,,current,enable(1):disable(2),This variable is used to enable or disable the sending of new violation 
.1.3.6.1.4.1.4526.11.20.1.2.1.6,NETGEAR-PORTSECURITY-PRIVATE-MIB::agentPortSecurityStaticMACs,OCTET,read-only,,current,,This variable displays the statically locked MAC addresses for port.
.1.3.6.1.4.1.4526.11.20.1.2.1.7,NETGEAR-PORTSECURITY-PRIVATE-MIB::agentPortSecurityLastDiscardedMAC,OCTET,read-only,,current,,This variable displays the vlan-id and source MAC address of the last packet that was
.1.3.6.1.4.1.4526.11.20.1.2.1.8,NETGEAR-PORTSECURITY-PRIVATE-MIB::agentPortSecurityMACAddressAdd,OCTET,read-write,,current,,This MIB variable accepts a VLAN id and MAC address to be added to the list
.1.3.6.1.4.1.4526.11.20.1.2.1.9,NETGEAR-PORTSECURITY-PRIVATE-MIB::agentPortSecurityMACAddressRemove,OCTET,read-write,,current,,This MIB variable accepts a VLAN id and MAC address to be removed from the list
.1.3.6.1.4.1.4526.11.20.1.2.1.10,NETGEAR-PORTSECURITY-PRIVATE-MIB::agentPortSecurityMACAddressMove,INTEGER,read-write,,current,enable(1):disable(2),When this object is enabled, all the dynamically locked MAC addresses will be moved to statically locked addresses on a port. GET operation on this object will display  disable.
.1.3.6.1.4.1.4526.11.20.1.3,NETGEAR-PORTSECURITY-PRIVATE-MIB::agentPortSecurityDynamicTable,,not-accessible,,current,,A table for Port Security Dynamic and associated functionality.
.1.3.6.1.4.1.4526.11.20.1.3.1,NETGEAR-PORTSECURITY-PRIVATE-MIB::agentPortSecurityDynamicEntry,,not-accessible,ifIndex:agentPortSecurityDynamicVLANId:agentPortSecurityDynamicMACAddress,current,,Represents entry for port MAC Locking table
.1.3.6.1.4.1.4526.11.20.1.3.1.1,NETGEAR-PORTSECURITY-PRIVATE-MIB::agentPortSecurityDynamicVLANId,Unsigned32,read-only,,current,,Source VLAN id of the packet that is received on the dynamically locked port.
.1.3.6.1.4.1.4526.11.20.1.3.1.2,NETGEAR-PORTSECURITY-PRIVATE-MIB::agentPortSecurityDynamicMACAddress,OCTET,read-only,,current,,Source MAC address of the packet that is received on the dynamically locked port.
.1.3.6.1.4.1.4526.11.20.2,NETGEAR-PORTSECURITY-PRIVATE-MIB::agentPortSecurityTraps,,,,,,
.1.3.6.1.4.1.4526.11.20.2.1,NETGEAR-PORTSECURITY-PRIVATE-MIB::agentPortSecurityViolation,,,,,,Sent when a packet is received on a locked port with a source MAC address  that is not allowed.
.1.3.6.1.4.1.4526.11.24,NETGEAR-KEYING-PRIVATE-MIB::agentKeyingPrivate,,,,,,The Netgear Private MIB for Keying Utility
.1.3.6.1.4.1.4526.11.24.1,NETGEAR-KEYING-PRIVATE-MIB::agentFeatureKeyingGroup,,,,,,
.1.3.6.1.4.1.4526.11.24.1.1,NETGEAR-KEYING-PRIVATE-MIB::agentFeatureKeyingEnableKey,OCTET,read-write,,current,,Hexadecimal Key-string entered to enable an advance functionality.
.1.3.6.1.4.1.4526.11.24.1.2,NETGEAR-KEYING-PRIVATE-MIB::agentFeatureKeyingDisableKey,OCTET,read-write,,current,,Hexadecimal Key-string entered to disable an advance functionality.
.1.3.6.1.4.1.4526.11.24.1.3,NETGEAR-KEYING-PRIVATE-MIB::agentFeatureKeyingTable,,not-accessible,,current,,A table for license key and associated functionality. 
.1.3.6.1.4.1.4526.11.24.1.3.1,NETGEAR-KEYING-PRIVATE-MIB::agentFeatureKeyingEntry,,not-accessible,agentFeatureKeyingIndex,current,,Represents entry for key table
.1.3.6.1.4.1.4526.11.24.1.3.1.1,NETGEAR-KEYING-PRIVATE-MIB::agentFeatureKeyingIndex,Unsigned32,not-accessible,,current,,A value corresponding to a keyable feature.When this table is walked,
.1.3.6.1.4.1.4526.11.24.1.3.1.2,NETGEAR-KEYING-PRIVATE-MIB::agentFeatureKeyingName,OCTET,read-only,,current,,The abbreviated name of this component.This is also equivalent to 
.1.3.6.1.4.1.4526.11.24.1.3.1.3,NETGEAR-KEYING-PRIVATE-MIB::agentFeatureKeyingStatus,INTEGER,read-only,,current,enable(1):disable(2),Returns a value of (1) if the feature is enabled for management,
.1.3.6.1.4.1.4526.11.31,NETGEAR-DENIALOFSERVICE-PRIVATE-MIB::agentDenialOfService,,,,,,The Netgear Private MIB for Denial of Service.
.1.3.6.1.4.1.4526.11.31.1,NETGEAR-DENIALOFSERVICE-PRIVATE-MIB::agentSwitchDenialOfServiceGroup,,,,,,
.1.3.6.1.4.1.4526.11.31.1.1,NETGEAR-DENIALOFSERVICE-PRIVATE-MIB::agentSwitchDenialOfServiceSIPDIPMode,INTEGER,read-write,,current,enable(1):disable(2),Enables or Disables the SIP=DIP Denial of Service  protection feature.
.1.3.6.1.4.1.4526.11.31.1.2,NETGEAR-DENIALOFSERVICE-PRIVATE-MIB::agentSwitchDenialOfServiceFirstFragMode,INTEGER,read-write,,current,enable(1):disable(2),Enables or Disables the First Fragment Denial of Service  protection feature.
.1.3.6.1.4.1.4526.11.31.1.3,NETGEAR-DENIALOFSERVICE-PRIVATE-MIB::agentSwitchDenialOfServiceTCPHdrSize,Integer32,read-write,,current,,Configures the Minimum allowed TCP Header size. This is active if the First Fragment Denial of Service protection feature is enabled.
.1.3.6.1.4.1.4526.11.31.1.4,NETGEAR-DENIALOFSERVICE-PRIVATE-MIB::agentSwitchDenialOfServiceTCPFragMode,INTEGER,read-write,,current,enable(1):disable(2),Enables or Disables the TCP Fragment Denial of Service  protection feature.
.1.3.6.1.4.1.4526.11.31.1.5,NETGEAR-DENIALOFSERVICE-PRIVATE-MIB::agentSwitchDenialOfServiceTCPFlagMode,INTEGER,read-write,,current,enable(1):disable(2),Enables or Disables the TCP Flag Denial of Service  protection feature.
.1.3.6.1.4.1.4526.11.31.1.6,NETGEAR-DENIALOFSERVICE-PRIVATE-MIB::agentSwitchDenialOfServiceL4PortMode,INTEGER,read-write,,current,enable(1):disable(2),Enables or Disables the L4 Port Denial of Service  protection feature.
.1.3.6.1.4.1.4526.11.31.1.7,NETGEAR-DENIALOFSERVICE-PRIVATE-MIB::agentSwitchDenialOfServiceICMPMode,INTEGER,read-write,,current,enable(1):disable(2),Enables or Disables the ICMP Denial of Service  protection feature.
.1.3.6.1.4.1.4526.11.31.1.8,NETGEAR-DENIALOFSERVICE-PRIVATE-MIB::agentSwitchDenialOfServiceICMPSize,Integer32,read-write,,current,,Configures the Maximum allowed ICMP data size. This is active if the ICMP Denial of Service protection feature is enabled.
.1.3.6.1.4.1.4526.11.37,NETGEAR-DNS-RESOLVER-CONTROL-MIB::agentDnsResControlMIB,,,,,,This MIB module defines a portion of the SNMP MIB under the Netgear enterprise OID pertaining to DNS Client control configuration
.1.3.6.1.4.1.4526.11.37.1,NETGEAR-DNS-RESOLVER-CONTROL-MIB::agentDnsResCtlMIBObjects,,,,,,
.1.3.6.1.4.1.4526.11.37.1.1,NETGEAR-DNS-RESOLVER-CONTROL-MIB::agentResCtlglobal,,,,,,
.1.3.6.1.4.1.4526.11.37.1.1.1,NETGEAR-DNS-RESOLVER-CONTROL-MIB::agentResCtlAdminMode,INTEGER,read-write,,current,true(1):false(2),The dns client administrative modes supported by the device. The dns client services can be turned on or off.
.1.3.6.1.4.1.4526.11.37.1.1.2,NETGEAR-DNS-RESOLVER-CONTROL-MIB::agentResCtlDefDomainName,OCTET,read-write,,current,,The default domain name for unqualified hostnames.
.1.3.6.1.4.1.4526.11.37.1.1.3,NETGEAR-DNS-RESOLVER-CONTROL-MIB::agentResCtlCacheFlushStatus,INTEGER,read-write,,current,dnsCacheFlushEnable(1):dnsCacheFlushDisable(2),The cache Flush status. If set to enable all dynamic cache  entries would be removed.
.1.3.6.1.4.1.4526.11.37.1.1.4,NETGEAR-DNS-RESOLVER-CONTROL-MIB::agentResCtlRequestTimeout,INTEGER,read-write,,current,,The timeout before retransmitting a request to the server. The  timeout value is configured and displayed in seconds.
.1.3.6.1.4.1.4526.11.37.1.1.5,NETGEAR-DNS-RESOLVER-CONTROL-MIB::agentResCtlRequestRetransmits,INTEGER,read-write,,current,,The number of times the request is retransmitted. The request is retransmitted provided the maximum timeout value allows this many number of retransmits.
.1.3.6.1.4.1.4526.11.37.1.1.6,NETGEAR-DNS-RESOLVER-CONTROL-MIB::agentResCtlDomainListTable,,not-accessible,,current,,A table for default domain list.
.1.3.6.1.4.1.4526.11.37.1.1.6.1,NETGEAR-DNS-RESOLVER-CONTROL-MIB::agentResCtlDomainListEntry,,not-accessible,agentResCtlDomainListName,current,,An entry in the DNS domain name list. Rows may be created or deleted at any time by the DNS Resolver and by SNMP SET requests.
.1.3.6.1.4.1.4526.11.37.1.1.6.1.1,NETGEAR-DNS-RESOLVER-CONTROL-MIB::agentResCtlDomainListName,OCTET,read-only,,current,,The dns domain list entry identified by this row of the table.
.1.3.6.1.4.1.4526.11.37.1.1.6.1.2,NETGEAR-DNS-RESOLVER-CONTROL-MIB::agentResCtlDomainListNameStatus,INTEGER,read-create,,current,active(1):notInService(2):notReady(3):createAndGo(4):createAndWait(5):destroy(6),Status of the DNS domain list Entry Table Supported values: active(1) - valid entry createAndGo(4) - used to create a new entry destroy(6) - removes the entry
.1.3.6.1.4.1.4526.11.37.1.2,NETGEAR-DNS-RESOLVER-CONTROL-MIB::agentResCtlServConfig,,,,,,
.1.3.6.1.4.1.4526.11.37.1.2.1,NETGEAR-DNS-RESOLVER-CONTROL-MIB::agentResCtlServConfigTable,,not-accessible,,current,,Table of DNS servers list
.1.3.6.1.4.1.4526.11.37.1.2.1.1,NETGEAR-DNS-RESOLVER-CONTROL-MIB::agentResCtlConfigIPEntry,,not-accessible,agentResCtlDnsNameServerIP,current,,An entry in the DNS Servers list. Rows may be created or deleted at any time by the DNS Resolver and by SNMP SET requests.
.1.3.6.1.4.1.4526.11.37.1.2.1.1.1,NETGEAR-DNS-RESOLVER-CONTROL-MIB::agentResCtlDnsNameServerIP,IpAddress,not-accessible,,current,,The IP address of the dns server identified by this row of the table.
.1.3.6.1.4.1.4526.11.37.1.2.1.1.2,NETGEAR-DNS-RESOLVER-CONTROL-MIB::agentResCtlDnsNameServerStatus,INTEGER,read-create,,current,active(1):notInService(2):notReady(3):createAndGo(4):createAndWait(5):destroy(6),Status of the DNS Server Address Table Supported values: active(1) - valid entry createAndGo(4) - used to create a new entry destroy(6) - removes the entry
.1.3.6.1.4.1.4526.11.37.1.3,NETGEAR-DNS-RESOLVER-CONTROL-MIB::agentResCtlStaticServConfig,,,,,,
.1.3.6.1.4.1.4526.11.37.1.3.1,NETGEAR-DNS-RESOLVER-CONTROL-MIB::agentResCtlStaticServConfigTable,,not-accessible,,current,,Static table of DNS hostname to IP address table
.1.3.6.1.4.1.4526.11.37.1.3.1.1,NETGEAR-DNS-RESOLVER-CONTROL-MIB::agentResCtlStaticServEntry,,not-accessible,agentResCtlStaticHostName:agentResCtlStaticIPAddress,current,,An entry in the static DNS hostname IP address list. Rows may be created or deleted at any time by the DNS Resolver and by SNMP SET requests.
.1.3.6.1.4.1.4526.11.37.1.3.1.1.1,NETGEAR-DNS-RESOLVER-CONTROL-MIB::agentResCtlStaticHostName,OCTET,not-accessible,,current,,The static hostname to be stored in the name server table.
.1.3.6.1.4.1.4526.11.37.1.3.1.1.2,NETGEAR-DNS-RESOLVER-CONTROL-MIB::agentResCtlStaticIPAddress,IpAddress,not-accessible,,current,,The IP address of the dns server for the static hostname.
.1.3.6.1.4.1.4526.11.37.1.3.1.1.3,NETGEAR-DNS-RESOLVER-CONTROL-MIB::agentResCtlStaticNameServerStatus,INTEGER,read-create,,current,active(1):notInService(2):notReady(3):createAndGo(4):createAndWait(5):destroy(6),Status of the Static Host Name - IP Address Table Supported values: active(1) - valid entry createAndGo(4) - used to create a new entry destroy(6) - removes the entry
.1.3.6.1.4.1.4526.11.1025,TIMER-CONTROL-MIB::timerControl,,,,,,The MIB module for the Timer Control feature.
.1.3.6.1.4.1.4526.11.1025.1,TIMER-CONTROL-MIB::timerCtrlObjects,,,,,,
.1.3.6.1.4.1.4526.11.1025.1.1,TIMER-CONTROL-MIB::timerCtrlModeGroup,,,,,,
.1.3.6.1.4.1.4526.11.1025.1.1.1,TIMER-CONTROL-MIB::timerCtrlGlobalMode,INTEGER,read-write,,current,enable(1):disable(2),Enable/disable Timer Control globally
.1.3.6.1.4.1.4526.11.1025.1.2,TIMER-CONTROL-MIB::timerCtrlSchdlTable,,not-accessible,,current,,A table of objects that display and control the Time Control characteristics. Values of all read-write objects in  this table are persistent at restart/reboot.
.1.3.6.1.4.1.4526.11.1025.1.2.1,TIMER-CONTROL-MIB::timerCtrlSchdlEntry,,not-accessible,timerCtrlSchdlIndex,current,,A set of objects that display and control the  Time Control characteristics.
.1.3.6.1.4.1.4526.11.1025.1.2.1.1,TIMER-CONTROL-MIB::timerCtrlSchdlIndex,Integer32,not-accessible,,current,,The value of this object uniquely identifies this Timer Control scheduler entry.
.1.3.6.1.4.1.4526.11.1025.1.2.1.2,TIMER-CONTROL-MIB::timerCtrlSchdlName,OCTET,read-create,,current,,The name of current scheduler entry
.1.3.6.1.4.1.4526.11.1025.1.2.1.3,TIMER-CONTROL-MIB::timerCtrlSchdlRecurring,INTEGER,read-create,,current,invalid(0):daily(1):weekly(2):monthly(3):yearly(4),Recurring for the current scheduler entry.
.1.3.6.1.4.1.4526.11.1025.1.2.1.4,TIMER-CONTROL-MIB::timerCtrlSchdlMonthFreq,INTEGER,read-create,,current,january(0):february(1):march(2):april(3):may(4):june(5):july(6):august(7):september(8):october(9):november(10):december(11),If the recurring is set to yearly(4) value indicates  month on which the scheduled action should take place.  Else value indicates number of how frequently timer will work
.1.3.6.1.4.1.4526.11.1025.1.2.1.5,TIMER-CONTROL-MIB::timerCtrlSchdlWeekDay,BITS,read-create,,current,sunday(0):monday(1):tuesday(2):wednesday(3):thursday(4):friday(5):saturday(6),The set of weekdays on which the scheduled action should take place. Setting multiple bits will include several weekdays in the set of possible weekdays for this schedule.
.1.3.6.1.4.1.4526.11.1025.1.2.1.6,TIMER-CONTROL-MIB::timerCtrlSchdlMonthDayAcc,Integer32,read-create,,current,,Value that indicates the day of month on which the scheduled  action should take place. Values that more than 31 used for occurance set/get: 32: first 33: second 34: third 35: fourth 36: last
.1.3.6.1.4.1.4526.11.1025.1.2.1.7,TIMER-CONTROL-MIB::timerCtrlSchdlTimeStart,OCTET,read-create,,current,,Value indicates the time when action should start. field octets contents range ----- ------ -------- ----- 1 1 hour 0..23 2 2 minutes 0..59
.1.3.6.1.4.1.4526.11.1025.1.2.1.8,TIMER-CONTROL-MIB::timerCtrlSchdlTimeStop,OCTET,read-create,,current,,Value indicates the time when action should stop. field octets contents range ----- ------ -------- ----- 1 1 hour 0..23 2 2 minutes 0..59
.1.3.6.1.4.1.4526.11.1025.1.2.1.9,TIMER-CONTROL-MIB::timerCtrlSchdlDateStart,OCTET,read-create,,current,,Value indicates the date when scheduler should start. field octets contents range ----- ------ -------- ----- 1 1-2 year 0..65536 2 3 month 1..12 3 4 day 1..31
.1.3.6.1.4.1.4526.11.1025.1.2.1.10,TIMER-CONTROL-MIB::timerCtrlSchdlDateStop,OCTET,read-create,,current,,Value indicates the date when scheduler should stop. field octets contents range ----- ------ -------- ----- 1 1-2 year 0..65536 2 3 month 1..12 3 4 day 1..31
.1.3.6.1.4.1.4526.11.1025.1.2.1.11,TIMER-CONTROL-MIB::timerCtrlSchdlRowStatus,INTEGER,read-create,,current,active(1):notInService(2):notReady(3):createAndGo(4):createAndWait(5):destroy(6),The row status of this conceptual row in the table. active - The server is available for use in SNTP client operations. Other writable leaves in this table MAY be modified while the row is in the active state. notInService - The entry is fully configured but is not available for use in SNTP client operations. The agent MAY transition a row from the active to notInService upon receipt of a kiss of death packet from the server. createAndGo - This is the preferred mechanism for creating conceptual rows in this table. This value can never be read as the row will always transition immediately to either active or notInService. destroy - This will remove the conceptual row from the table and make it unavailable for SNTP client operations. 
.1.3.6.1.4.1.4526.11.1025.1.3,TIMER-CONTROL-MIB::timerCtrlGroup,,,,,,A collection of objects providing device level control of an SNTP client on FASTPATH enabled devices.
.1.3.6.1.4.1.4526.12,BROADCOM-REF-MIB::ngrouter,,,,,,
.1.3.6.1.4.1.4526.13,BROADCOM-REF-MIB::ngfirewall,,,,,,
.1.3.6.1.4.1.4526.14,BROADCOM-REF-MIB::ngap,,,,,,
.1.3.6.1.4.1.4526.15,BROADCOM-REF-MIB::ngwlan,,,,,,
.1.3.6.1.4.1.4526.16,BROADCOM-REF-MIB::ng9000chassisswitch,,,,,,
.1.3.6.1.4.1.4526.17,BROADCOM-REF-MIB::ng700stacksmartswitch,,,,,,
.1.3.6.1.4.1.4526.100,BROADCOM-REF-MIB::productID,,,,,,
.1.3.6.1.4.1.4526.100.1,BROADCOM-REF-MIB::stackswitch,,,,,,
.1.3.6.1.4.1.4526.100.1.1,BROADCOM-REF-MIB::fsm7328s,,,,,,
.1.3.6.1.4.1.4526.100.1.2,BROADCOM-REF-MIB::fsm7352s,,,,,,
.1.3.6.1.4.1.4526.100.1.3,BROADCOM-REF-MIB::gsm7328s,,,,,,
.1.3.6.1.4.1.4526.100.1.4,BROADCOM-REF-MIB::gsm7352s,,,,,,
.1.3.6.1.4.1.4526.100.1.5,BROADCOM-REF-MIB::fsm7352ps,,,,,,
.1.3.6.1.4.1.4526.100.1.7,BROADCOM-REF-MIB::gsm7328fs,,,,,,
.1.3.6.1.4.1.4526.100.1.8,BROADCOM-REF-MIB::fsm7328ps,,,,,,
.1.3.6.1.4.1.4526.100.1.9,BROADCOM-REF-MIB::gsm7228ps,,,,,,
.1.3.6.1.4.1.4526.100.1.10,BROADCOM-REF-MIB::gsm7252ps,,,,,,
.1.3.6.1.4.1.4526.100.1.11,BROADCOM-REF-MIB::fsm7226rs,,,,,,
.1.3.6.1.4.1.4526.100.1.12,BROADCOM-REF-MIB::fsm7250rs,,,,,,
.1.3.6.1.4.1.4526.100.1.13,BROADCOM-REF-MIB::gsm7328se,,,,,,
.1.3.6.1.4.1.4526.100.1.14,BROADCOM-REF-MIB::gsm7352se,,,,,,
.1.3.6.1.4.1.4526.100.2,BROADCOM-REF-MIB::l2switch,,,,,,
.1.3.6.1.4.1.4526.100.2.1,BROADCOM-REF-MIB::gsm7248,,,,,,
.1.3.6.1.4.1.4526.100.2.2,BROADCOM-REF-MIB::gsm7212,,,,,,
.1.3.6.1.4.1.4526.100.2.3,BROADCOM-REF-MIB::gsm7224i,,,,,,
.1.3.6.1.4.1.4526.100.2.4,BROADCOM-REF-MIB::fsm7226,,,,,,
.1.3.6.1.4.1.4526.100.3,BROADCOM-REF-MIB::l3switch,,,,,,
.1.3.6.1.4.1.4526.100.3.1,BROADCOM-REF-MIB::gsm7312v2,,,,,,
.1.3.6.1.4.1.4526.100.3.2,BROADCOM-REF-MIB::gsm7324v2,,,,,,
.1.3.6.1.4.1.4526.100.3.3,BROADCOM-REF-MIB::xsm7312,,,,,,
.1.3.6.1.4.1.4526.100.3.4,BROADCOM-REF-MIB::gsm7324p,,,,,,
.1.3.6.1.4.1.4526.100.3.5,BROADCOM-REF-MIB::gsm7312i,,,,,,
.1.3.6.1.4.1.4526.100.3.6,BROADCOM-REF-MIB::gsm7324i,,,,,,
.1.3.6.1.4.1.4526.100.3.7,BROADCOM-REF-MIB::fsm7326pi,,,,,,
.1.3.6.1.4.1.4526.100.4,BROADCOM-REF-MIB::smartswitch,,,,,,
.1.3.6.1.4.1.4526.100.4.1,BROADCOM-REF-MIB::gs748t,,,,,,
.1.3.6.1.4.1.4526.100.4.2,BROADCOM-REF-MIB::fs726t,,,,,,
.1.3.6.1.4.1.4526.100.4.3,BROADCOM-REF-MIB::gs716t,,,,,,
.1.3.6.1.4.1.4526.100.4.4,BROADCOM-REF-MIB::fs750t,,,,,,
.1.3.6.1.4.1.4526.100.4.5,BROADCOM-REF-MIB::gs724t,,,,,,
.1.3.6.1.4.1.4526.100.4.6,BROADCOM-REF-MIB::fs726tp,,,,,,
.1.3.6.1.4.1.4526.100.4.7,BROADCOM-REF-MIB::fs728tp,,,,,,
.1.3.6.1.4.1.4526.100.4.8,BROADCOM-REF-MIB::gs108t,,,,,,
.1.3.6.1.4.1.4526.100.4.9,BROADCOM-REF-MIB::gs108tp,,,,,,
.1.3.6.1.4.1.4526.100.4.10,BROADCOM-REF-MIB::gs724tp,,,,,,
.1.3.6.1.4.1.4526.100.4.11,BROADCOM-REF-MIB::gs748tp,,,,,,
.1.3.6.1.4.1.4526.100.4.12,BROADCOM-REF-MIB::gs724tr,,,,,,
.1.3.6.1.4.1.4526.100.4.13,BROADCOM-REF-MIB::gs748tr,,,,,,
.1.3.6.1.4.1.4526.100.4.16,NETGEAR-REF-MIB::gs716tv2,,,,,,
.1.3.6.1.4.1.4526.100.4.17,NETGEAR-REF-MIB::gs724tv3,,,,,,
.1.3.6.1.4.1.4526.100.4.18,NETGEAR-REF-MIB::gs108tv2,,,,,,
.1.3.6.1.4.1.4526.100.4.19,NETGEAR-REF-MIB::gs110tp,,,,,,
.1.3.6.1.4.1.4526.100.5,BROADCOM-REF-MIB::router,,,,,,
.1.3.6.1.4.1.4526.100.5.1,BROADCOM-REF-MIB::fvx538,,,,,,
.1.3.6.1.4.1.4526.100.5.2,BROADCOM-REF-MIB::fvs338,,,,,,
.1.3.6.1.4.1.4526.100.5.3,BROADCOM-REF-MIB::fvg318,,,,,,
.1.3.6.1.4.1.4526.100.5.4,BROADCOM-REF-MIB::fvs336g,,,,,,
.1.3.6.1.4.1.4526.100.6,BROADCOM-REF-MIB::firewall,,,,,,
.1.3.6.1.4.1.4526.100.6.3,BROADCOM-REF-MIB::fwag114,,,,,,
.1.3.6.1.4.1.4526.100.6.4,BROADCOM-REF-MIB::fvs124g,,,,,,
.1.3.6.1.4.1.4526.100.6.5,BROADCOM-REF-MIB::fvs318v3,,,,,,
.1.3.6.1.4.1.4526.100.6.6,BROADCOM-REF-MIB::dgfv338,,,,,,
.1.3.6.1.4.1.4526.100.7,BROADCOM-REF-MIB::accesspoint,,,,,,
.1.3.6.1.4.1.4526.100.7.1,BROADCOM-REF-MIB::wpn802,,,,,,
.1.3.6.1.4.1.4526.100.7.2,BROADCOM-REF-MIB::wg312,,,,,,
.1.3.6.1.4.1.4526.100.7.3,BROADCOM-REF-MIB::wag312,,,,,,
.1.3.6.1.4.1.4526.100.8,BROADCOM-REF-MIB::wirelessLAN,,,,,,
.1.3.6.1.4.1.4526.100.8.2,WC7520-MIB::wc7520,,,,,,The MIB module for 802.11a/b/g/n Prosafe 50AP Wireless Management System iso(1). org(3).dod(6).internet(1).private(4). enterprises(1).netgear(4526).productID(100). Wlancontroller(14).wc7520(2)
.1.3.6.1.4.1.4526.100.8.2.1,WC7520-MIB::wcSystemGeneralSettings,,,,,,
.1.3.6.1.4.1.4526.100.8.2.1.1,WC7520-MIB::wcName,OCTET,read-write,,current,,WC7520 controller name.
.1.3.6.1.4.1.4526.100.8.2.1.2,WC7520-MIB::wcCountry,INTEGER,read-write,,current,Albania(8):Algeria(12):Azerbaijan(31):Argentina(32):Asia(33):Australia(36):Austria(40):Bahrain(48):Armenia(51):Belgium(56):Bolivia(68):Brazil(76):Belize(84):Brunei(96):Bulgaria(100):Belarus(112):Canada(124):Chile(152):China(156):Taiwan(158):Colombia(170):CostaRica(188):Croatia(191):Cyprus(196):CzechRepublic(203):Denmark(208):DominicanRepublic(214):Ecuador(218):ElSalvador(222):Estonia(233):Europe(234):Finland(246):France(250):Georgia(268):Germany(276):Greece(300):Guatemala(320):Honduras(340):Hongkong(344):Hungary(348):Iceland(352):India(356):Indonesia(360):Iran(364):Ireland(372):Israel(376):Italy(380):Japan(392):Kazakhstan(398):Jordan(400):NorthKorea(408):KoreaRepublic(410):Kuwait(414):Lebanon(422):Latvia(428):Liechtenstein(438):Lithuania(440):Luxembourg(442):Macau(446):Malaysia(458):Malta(470):Mexico(484):Monaco(492):Marocco(504):Oman(512):Netherlands(528):NewZealand(554):Norway(578):Pakistan(586):Panama(591):Peru(604):Philippines(608):Poland(616):Portugal(620):PuertoRico(630):Qatar(634):Romania(642):Russia(643):SaudiArabia(682):Singapore(702):SlovakRepublic(703):Vietnam(704):Slovenia(705):SouthAfrica(710):Zimbabwe(716):Spain(724):Sweden(752):Switzerland(756):Syria(760):Thailand(764):TrinidadAndTobago(780):UnitedArabEmirates(784):Tunisia(788):Turkey(792):Ukraine(804):Macedonia(807):Egypt(818):UnitedKingdom(826):UnitedStates(840):Uruguay(858):Uzbekistan(860):Venezuela(862):Yemen(887),WC7520 controllers country.
.1.3.6.1.4.1.4526.100.8.2.1.3,WC7520-MIB::wcLocation,OCTET,read-write,,current,,WC7520 controllers location.
.1.3.6.1.4.1.4526.100.8.2.1.4,WC7520-MIB::wcState,INTEGER,read-write,,current,Applied(1):Modified(2):Apply(3),State flag is used to apply the configuration. Applied(1) : configuration is fresh or applied already. Modified(2) : some of the configuration field is modified but not yet applied. Apply(3) : Use this value to apply modified configuration
.1.3.6.1.4.1.4526.100.8.2.2,WC7520-MIB::wcIpVlan,,,,,,
.1.3.6.1.4.1.4526.100.8.2.2.1,WC7520-MIB::wcIpVlanIp,IpAddress,read-write,,current,,IP address of controller
.1.3.6.1.4.1.4526.100.8.2.2.2,WC7520-MIB::wcIpVlanSubnetMask,IpAddress,read-write,,current,,Subnet mask for controller IP
.1.3.6.1.4.1.4526.100.8.2.2.3,WC7520-MIB::wcIpVlanDefaultGateway,IpAddress,read-write,,current,,Default Gateway servers IP address.
.1.3.6.1.4.1.4526.100.8.2.2.4,WC7520-MIB::wcIpVlanPrimaryDnsServer,IpAddress,read-write,,current,,Primary DNS Server IP address
.1.3.6.1.4.1.4526.100.8.2.2.5,WC7520-MIB::wcIpVlanSecondaryDnsServer,IpAddress,read-write,,current,,Secondary DNS Server IP address
.1.3.6.1.4.1.4526.100.8.2.2.6,WC7520-MIB::wcIpVlanWinsServer,OCTET,read-write,,current,,Wins Server IP address.
.1.3.6.1.4.1.4526.100.8.2.2.7,WC7520-MIB::wcIpVlanVlanEnable,INTEGER,read-write,,current,disable(0):enable(1),Enable-Disable Vlan. disable(0) : To disable Vlan enable(1) : To enable Vlan
.1.3.6.1.4.1.4526.100.8.2.2.8,WC7520-MIB::wcIpVlanUntaggedVlan,Integer32,read-write,,current,,WC7520 controller untagged vlan
.1.3.6.1.4.1.4526.100.8.2.2.9,WC7520-MIB::wcIpVlanManagementVlan,Integer32,read-write,,current,,WC7520 controller management vlan
.1.3.6.1.4.1.4526.100.8.2.2.10,WC7520-MIB::wcIpVlanState,INTEGER,read-write,,current,Applied(1):Modified(2):Apply(3),State flag is used to apply the configuration. Applied(1) : configuration is fresh or applied already. Modified(2) : some of the configurations field are modified but not yet applied. Apply(3) : Use this value to apply modified configuration
.1.3.6.1.4.1.4526.100.8.2.3,WC7520-MIB::wcAccessPoint,,,,,,
.1.3.6.1.4.1.4526.100.8.2.3.1,WC7520-MIB::wcAccessPointTable,,not-accessible,,current,,List of access points managed by WC7520. MAC address is the key index for this table 
.1.3.6.1.4.1.4526.100.8.2.3.1.1,WC7520-MIB::wcAccessPointEntry,,not-accessible,wcAccessPointMac,current,,A row describing configuration of one managed access point.
.1.3.6.1.4.1.4526.100.8.2.3.1.1.1,WC7520-MIB::wcAccessPointMac,OCTET,read-only,,current,,MAC address of Access Point
.1.3.6.1.4.1.4526.100.8.2.3.1.1.2,WC7520-MIB::wcAccessPointIp,IpAddress,read-only,,current,,IP address of Access Point
.1.3.6.1.4.1.4526.100.8.2.3.1.1.3,WC7520-MIB::wcAccessPointSubnetMask,IpAddress,read-only,,current,,IP subnet mask of Access Point
.1.3.6.1.4.1.4526.100.8.2.3.1.1.4,WC7520-MIB::wcAccessPointDefaultGateway,IpAddress,read-only,,current,,Default gateway for Access Point.
.1.3.6.1.4.1.4526.100.8.2.3.1.1.5,WC7520-MIB::wcAccessPointVlanEnable,INTEGER,read-write,,current,disable(0):enable(1),Enable-Disable Vlan. disable(0) : To disable Vlan enable(1) : To enable Vlan
.1.3.6.1.4.1.4526.100.8.2.3.1.1.6,WC7520-MIB::wcAccessPointUntaggedVlan,Integer32,read-write,,current,,Access Point Untagged Vlan.
.1.3.6.1.4.1.4526.100.8.2.3.1.1.7,WC7520-MIB::wcAccessPointManagementVlan,Integer32,read-write,,current,,Access Point Management Vlan
.1.3.6.1.4.1.4526.100.8.2.3.1.1.8,WC7520-MIB::wcAccessPointName,OCTET,read-write,,current,,Access Point Name
.1.3.6.1.4.1.4526.100.8.2.3.1.1.9,WC7520-MIB::wcAccessPointModel,OCTET,read-only,,current,,Access Point Model
.1.3.6.1.4.1.4526.100.8.2.3.1.1.10,WC7520-MIB::wcAccessPointGroup,Integer32,read-only,,current,,Access Point Group id
.1.3.6.1.4.1.4526.100.8.2.3.1.1.11,WC7520-MIB::wcAccessPointAntenna,Integer32,read-only,,current,,Access Point Antenna
.1.3.6.1.4.1.4526.100.8.2.3.1.1.12,WC7520-MIB::wcAccessPointBuilding,Integer32,read-write,,current,,Access Point building index.
.1.3.6.1.4.1.4526.100.8.2.3.1.1.13,WC7520-MIB::wcAccessPointFloor,Integer32,read-write,,current,,Access Point floor index
.1.3.6.1.4.1.4526.100.8.2.3.1.1.14,WC7520-MIB::wcAccessPointLocation,OCTET,read-write,,current,,Access Point location string
.1.3.6.1.4.1.4526.100.8.2.3.1.1.15,WC7520-MIB::wcAccessPointLocX,Integer32,read-only,,current,,Access Point location x-axis (in meters)
.1.3.6.1.4.1.4526.100.8.2.3.1.1.16,WC7520-MIB::wcAccessPointLocY,Integer32,read-only,,current,,Access Point location y-axis (in meters)
.1.3.6.1.4.1.4526.100.8.2.3.1.1.17,WC7520-MIB::wcAccessPointState,OCTET,read-only,,current,,Access Point Status
.1.3.6.1.4.1.4526.100.8.2.3.1.1.18,WC7520-MIB::wcAccessPointRowStatus,INTEGER,read-write,,current,active(1):notInService(2):notReady(3):createAndGo(4):createAndWait(5):destroy(6),Row Status is used to apply the access point configuration. active(1) - send rowstatus as active(1) to apply the configuration. notReady(3) - Indicates that some columns in the row are modified and not yet applied. notInService(2), createAndWait(5), createAndGo(4), destroy(6) - not valid for this table.
.1.3.6.1.4.1.4526.100.8.2.3.2,WC7520-MIB::wcAccessPointDetailsTable,,not-accessible,,current,,This table provides detailed configuration of access point.
.1.3.6.1.4.1.4526.100.8.2.3.2.1,WC7520-MIB::wcAccessPointDetailsEntry,,not-accessible,wcAccessPointDetailsMac,current,,A row describing detailed configuration of one managed access point.
.1.3.6.1.4.1.4526.100.8.2.3.2.1.1,WC7520-MIB::wcAccessPointDetailsMac,OCTET,read-only,,current,,Access Point MAC address.
.1.3.6.1.4.1.4526.100.8.2.3.2.1.2,WC7520-MIB::wcAccessPointDetailsIp,IpAddress,read-only,,current,,Access Point IP address.
.1.3.6.1.4.1.4526.100.8.2.3.2.1.3,WC7520-MIB::wcAccessPointDetailsName,OCTET,read-only,,current,,Access Point Name.
.1.3.6.1.4.1.4526.100.8.2.3.2.1.4,WC7520-MIB::wcAccessPointDetailsModel,OCTET,read-only,,current,,Access Point model.
.1.3.6.1.4.1.4526.100.8.2.3.2.1.5,WC7520-MIB::wcAccessPointDetailsGroup,Integer32,read-only,,current,,Access Point group index.
.1.3.6.1.4.1.4526.100.8.2.3.2.1.6,WC7520-MIB::wcAccessPointDetails24GHzChannel,OCTET,read-only,,current,,Access Point 2.4 GHz channel.
.1.3.6.1.4.1.4526.100.8.2.3.2.1.7,WC7520-MIB::wcAccessPointDetails5GHzChannel,OCTET,read-only,,current,,Access Point 5 GHz channel.
.1.3.6.1.4.1.4526.100.8.2.3.2.1.8,WC7520-MIB::wcAccessPointDetails24GHzOperatingChannel,OCTET,read-only,,current,,Access Point 2.4 GHz operating channel.
.1.3.6.1.4.1.4526.100.8.2.3.2.1.9,WC7520-MIB::wcAccessPointDetails5GHzOperatingChannel,OCTET,read-only,,current,,Access Point 5 GHz channel.
.1.3.6.1.4.1.4526.100.8.2.3.2.1.10,WC7520-MIB::wcAccessPointDetailsChannelMgmt,OCTET,read-only,,current,,This field tells if auto channel allocation is on or not.
.1.3.6.1.4.1.4526.100.8.2.3.2.1.11,WC7520-MIB::wcAccessPointDetailsLoadBalanceMaxClients,Integer32,read-only,,current,,Max number of clients for load balancing.
.1.3.6.1.4.1.4526.100.8.2.3.2.1.12,WC7520-MIB::wcAccessPointDetailsLoadBalanceSignalQuality,Integer32,read-only,,current,,Signal quality for load balancing.
.1.3.6.1.4.1.4526.100.8.2.4,WC7520-MIB::wcClients,,,,,,
.1.3.6.1.4.1.4526.100.8.2.4.1,WC7520-MIB::wcClientListTable,,not-accessible,,current,,List of all the clients connected to Access points managed by WC7520
.1.3.6.1.4.1.4526.100.8.2.4.1.1,WC7520-MIB::wcClientListEntry,,not-accessible,wcClientListMac,current,,Each row give info about a client and access point to which it is connected.
.1.3.6.1.4.1.4526.100.8.2.4.1.1.1,WC7520-MIB::wcClientMac,OCTET,read-only,,current,,Mac address of the client.
.1.3.6.1.4.1.4526.100.8.2.4.1.1.2,WC7520-MIB::wcClientIp,IpAddress,read-only,,current,,IP address of the client.
.1.3.6.1.4.1.4526.100.8.2.4.1.1.3,WC7520-MIB::wcClientLocation,OCTET,read-only,,current,,client location.
.1.3.6.1.4.1.4526.100.8.2.4.1.1.4,WC7520-MIB::wcClientApName,OCTET,read-only,,current,,Name of Access Point to which cleint is connected.
.1.3.6.1.4.1.4526.100.8.2.4.1.1.5,WC7520-MIB::wcClientApIp,IpAddress,read-only,,current,,IP Address of Access Point to which cleint is connected.
.1.3.6.1.4.1.4526.100.8.2.4.1.1.6,WC7520-MIB::wcClientApMac,OCTET,read-only,,current,,MAC address of Access Point to which cleint is connected.
.1.3.6.1.4.1.4526.100.8.2.4.1.1.7,WC7520-MIB::wcClientBssid,OCTET,read-only,,current,,Brodcast SSID of Access Point.
.1.3.6.1.4.1.4526.100.8.2.4.1.1.8,WC7520-MIB::wcClientSsid,OCTET,read-only,,current,,SSID of Access Point.
.1.3.6.1.4.1.4526.100.8.2.4.2,WC7520-MIB::wcClientDetailsTable,,not-accessible,,current,,Detailed information about the clients connected to Access Points managed by WC7520.
.1.3.6.1.4.1.4526.100.8.2.4.2.1,WC7520-MIB::wcClientDetailsEntry,,not-accessible,wcClientListMac,current,,A row describing detailed information about each client.
.1.3.6.1.4.1.4526.100.8.2.4.2.1.1,WC7520-MIB::wcClientDetailsMac,OCTET,read-only,,current,,MAC address of the client.
.1.3.6.1.4.1.4526.100.8.2.4.2.1.2,WC7520-MIB::wcClientDetailsAp,OCTET,read-only,,current,,Name of Access Point to which client is connected.
.1.3.6.1.4.1.4526.100.8.2.4.2.1.3,WC7520-MIB::wcClientDetailsBssid,OCTET,read-only,,current,,Bssid of the client.
.1.3.6.1.4.1.4526.100.8.2.4.2.1.4,WC7520-MIB::wcClientDetailsFrequency,OCTET,read-only,,current,,Frequent band of client.
.1.3.6.1.4.1.4526.100.8.2.4.2.1.5,WC7520-MIB::wcClientDetailsAuth,OCTET,read-only,,current,,Authentication method.
.1.3.6.1.4.1.4526.100.8.2.4.2.1.6,WC7520-MIB::wcClientDetailsCipher,OCTET,read-only,,current,,Cleint cipher
.1.3.6.1.4.1.4526.100.8.2.4.2.1.7,WC7520-MIB::wcClientDetailsAid,Integer32,read-only,,current,,Client Aid
.1.3.6.1.4.1.4526.100.8.2.4.2.1.8,WC7520-MIB::wcClientDetailsRssi,Integer32,read-only,,current,,Clients RSSI
.1.3.6.1.4.1.4526.100.8.2.4.2.1.9,WC7520-MIB::wcClientDetailsTxPower,Integer32,read-only,,current,,Client transmit power
.1.3.6.1.4.1.4526.100.8.2.4.2.1.10,WC7520-MIB::wcClientDetailsTxRate,OCTET,read-only,,current,,Client transmited data rate.
.1.3.6.1.4.1.4526.100.8.2.4.2.1.11,WC7520-MIB::wcClientDetailsTxBytes,Integer32,read-only,,current,,Client transmited number of bytes.
.1.3.6.1.4.1.4526.100.8.2.4.2.1.12,WC7520-MIB::wcClientDetailsRxRate,OCTET,read-only,,current,,Client received data rate.
.1.3.6.1.4.1.4526.100.8.2.4.2.1.13,WC7520-MIB::wcClientDetailsRxBytes,Integer32,read-only,,current,,Client received number of bytes.
.1.3.6.1.4.1.4526.100.8.2.4.2.1.14,WC7520-MIB::wcClientDetailsTxPackets,Integer32,read-only,,current,,Client transmitted number of bytes
.1.3.6.1.4.1.4526.100.8.2.4.2.1.15,WC7520-MIB::wcClientDetailsRxPackets,Integer32,read-only,,current,,Client received number of packets
.1.3.6.1.4.1.4526.100.8.2.5,WC7520-MIB::wcProfiles,,,,,,
.1.3.6.1.4.1.4526.100.8.2.5.1,WC7520-MIB::wcProfileGroupsTable,,not-accessible,,current,,List of profile groups.
.1.3.6.1.4.1.4526.100.8.2.5.1.1,WC7520-MIB::wcProfileGroupsEntry,,read-create,wcProfileGroupGroupIdx,current,,A row describing a profile-group.
.1.3.6.1.4.1.4526.100.8.2.5.1.1.1,WC7520-MIB::wcProfileGroupGroupIdx,Integer32,not-accessible,,current,,Profile group index.
.1.3.6.1.4.1.4526.100.8.2.5.1.1.2,WC7520-MIB::wcProfileGroupName,OCTET,read-only,,current,,Name of profile-group
.1.3.6.1.4.1.4526.100.8.2.5.1.1.3,WC7520-MIB::wcProfileGroupBgProfiles,Integer32,read-only,,current,,Number of 802.11b/bg/ng profiles.
.1.3.6.1.4.1.4526.100.8.2.5.1.1.4,WC7520-MIB::wcProfileGroupAProfiles,Integer32,read-only,,current,,Number of 802.11a/na profiles.
.1.3.6.1.4.1.4526.100.8.2.5.1.1.5,WC7520-MIB::wcProfileGroupsRowStatus,INTEGER,read-create,,current,active(1):notInService(2):notReady(3):createAndGo(4):createAndWait(5):destroy(6),active(1) - Default value of row status. createAndGo(4) - To create a new profile group. group-index must be provided to add a new profile group. Note: After creation of profile-group, group-index can be different from what is provided. destroy(6) - To delete a profile group.
.1.3.6.1.4.1.4526.100.8.2.5.2,WC7520-MIB::wcProfilesTable,,not-accessible,,current,,List of all the profiles.
.1.3.6.1.4.1.4526.100.8.2.5.2.1,WC7520-MIB::wcProfilesEntry,,read-create,wcProfilesGroupIdx:wcProfilesRadioMode:wcProfilesIdx,current,,A row describing a profile. A profile is identified by its group-index, radio-mode, and profile-index.
.1.3.6.1.4.1.4526.100.8.2.5.2.1.1,WC7520-MIB::wcProfilesGroupIdx,Integer32,not-accessible,,current,,Profile group index to which this profile belongs. for basic group index=0.
.1.3.6.1.4.1.4526.100.8.2.5.2.1.2,WC7520-MIB::wcProfilesRadioMode,OCTET,not-accessible,,current,,Profile radio mode, one of 802.11b/bg/ng or 802.11a/na.
.1.3.6.1.4.1.4526.100.8.2.5.2.1.3,WC7520-MIB::wcProfilesIdx,Integer32,not-accessible,,current,,Profile index which identifies a profile in a group.
.1.3.6.1.4.1.4526.100.8.2.5.2.1.4,WC7520-MIB::wcProfilesName,OCTET,read-write,,current,,Profile name.
.1.3.6.1.4.1.4526.100.8.2.5.2.1.5,WC7520-MIB::wcProfilesSsid,OCTET,read-write,,current,,SSID of profile.
.1.3.6.1.4.1.4526.100.8.2.5.2.1.6,WC7520-MIB::wcProfilesBssid,INTEGER,read-write,,current,Enable(1):Disable(0),Enable/Disable broadcast of SSID.
.1.3.6.1.4.1.4526.100.8.2.5.2.1.7,WC7520-MIB::wcProfilesAuthentication,INTEGER,read-write,,current,OpenSystem(1):SharedKey(2):Legacy8021x(3):WPAWithRadius(5):WPA2WithRadius(7):WPA-WPA2WithRadius(9):WPAPSK(6):WPA2PSK(8):WPAPSK-WPA2PSK(10),Authentication type.
.1.3.6.1.4.1.4526.100.8.2.5.2.1.8,WC7520-MIB::wcProfilesEncryption,INTEGER,read-write,,current,None(0):64BitWEP(1):128BitWEP(2):152BitWEP(3):TKIP(4):TKIP-AES(5):AES(7),Encryption type.
.1.3.6.1.4.1.4526.100.8.2.5.2.1.9,WC7520-MIB::wcProfilesKeyIndex,Integer32,read-write,,current,,Index of key used out of following four keys.
.1.3.6.1.4.1.4526.100.8.2.5.2.1.10,WC7520-MIB::wcProfilesKey1,OCTET,read-write,,current,,key 1
.1.3.6.1.4.1.4526.100.8.2.5.2.1.11,WC7520-MIB::wcProfilesKey2,OCTET,read-write,,current,,key 2
.1.3.6.1.4.1.4526.100.8.2.5.2.1.12,WC7520-MIB::wcProfilesKey3,OCTET,read-write,,current,,key 3
.1.3.6.1.4.1.4526.100.8.2.5.2.1.13,WC7520-MIB::wcProfilesKey4,OCTET,read-write,,current,,key 4
.1.3.6.1.4.1.4526.100.8.2.5.2.1.14,WC7520-MIB::wcProfilesClientSepration,INTEGER,read-write,,current,Enable(1):Disable(0),Enable/Disable client seperation.
.1.3.6.1.4.1.4526.100.8.2.5.2.1.15,WC7520-MIB::wcProfilesVlan,Integer32,read-write,,current,,Vlan
.1.3.6.1.4.1.4526.100.8.2.5.2.1.16,WC7520-MIB::wcProfilesAuthServerGroup,Integer32,read-write,,current,,Index of Authetication server group used for this profile.
.1.3.6.1.4.1.4526.100.8.2.5.2.1.17,WC7520-MIB::wcProfilesAclGroup,Integer32,read-write,,current,,Index of ACL group used for this profile.
.1.3.6.1.4.1.4526.100.8.2.5.2.1.18,WC7520-MIB::wcProfilesCaptivePortal,INTEGER,read-write,,current,Enable(1):Disable(0),Enable/Disable captive portal.
.1.3.6.1.4.1.4526.100.8.2.5.2.1.19,WC7520-MIB::wcProfilesWiFiMultimedia,INTEGER,read-write,,current,Enable(1):Disable(0),Enable/Disable WiFi Multimedia.
.1.3.6.1.4.1.4526.100.8.2.5.2.1.20,WC7520-MIB::wcProfilesWiFiMultimediaPowerSave,INTEGER,read-write,,current,Enable(1):Disable(0),Enable/Disable WiFi Multimedia Powersave.
.1.3.6.1.4.1.4526.100.8.2.5.2.1.21,WC7520-MIB::wcProfilesRowStatus,INTEGER,read-create,,current,active(1):notInService(2):notReady(3):createAndGo(4):createAndWait(5):destroy(6),Row Status is used to apply modified profile configuration, create and destroy a new profile. active(1) - Indicates there is no modifications pending for commit for this profile. notReady(3) - Indicates that some columns in the row are modified and not yet applied. send active(1) to apply modified configurations. createAndGo(4) - To create a new profile. group-index, radio-mode and profile-index must be  provided to add a new profile. Note: After creation of a profile, profile-index can be different from what is provided. destroy(6) - To delete a profile. notInService(2), createAndWait(5) - not valid for this table.
.1.3.6.1.4.1.4526.100.8.2.20,WC7520-MIB::wcNotifications,,,,,,
.1.3.6.1.4.1.4526.100.8.2.20.0,WC7520-MIB::wcNotificationPrefix,,,,,,
.1.3.6.1.4.1.4526.100.8.2.20.3,WC7520-MIB::wcNotificationObjects,,,,,,
.1.3.6.1.4.1.4526.100.9,BROADCOM-REF-MIB::chassisswitch,,,,,,
.1.3.6.1.4.1.4526.100.9.1,BROADCOM-REF-MIB::gcm9000,,,,,,
.1.3.6.1.4.1.4526.100.10,BROADCOM-REF-MIB::stacksmartswitch,,,,,,
.1.3.6.1.4.1.4526.100.10.1,BROADCOM-REF-MIB::fs728ts,,,,,,
.1.3.6.1.4.1.4526.100.10.2,BROADCOM-REF-MIB::fs752ts,,,,,,
.1.3.6.1.4.1.4526.100.10.3,BROADCOM-REF-MIB::fs752tps,,,,,,
.1.3.6.1.4.1.4526.100.10.4,BROADCOM-REF-MIB::gs724ts,,,,,,
.1.3.6.1.4.1.4526.100.10.5,BROADCOM-REF-MIB::gs748ts,,,,,,
.1.3.6.1.4.1.4526.100.11,BROADCOM-REF-MIB::l2Rswitch,,,,,,
.1.3.6.1.4.1.4526.100.11.1,BROADCOM-REF-MIB::gsm7224r,,,,,,
.1.3.6.1.4.1.4526.100.11.2,BROADCOM-REF-MIB::gsm7248r,,,,,,
.1.3.6.1.4.1.4526.100.11.3,BROADCOM-REF-MIB::gsm7224rp,,,,,,
.1.3.6.1.4.1.4526.100.11.4,BROADCOM-REF-MIB::gsm7248rp,,,,,,
.1.3.6.1.4.1.4526.100.11.5,BROADCOM-REF-MIB::gsm7224v2,,,,,,
.1.3.6.1.4.1.4526.100.11.6,BROADCOM-REF-MIB::gsm7248v2,,,,,,
.1.3.6.1.5,SNMPv2-SMI::security,,,,,,
.1.3.6.1.6,SNMPv2-SMI::snmpV2,,,,,,
.1.3.6.1.6.1,SNMPv2-SMI::snmpDomains,,,,,,
.1.3.6.1.6.2,SNMPv2-SMI::snmpProxys,,,,,,
.1.3.6.1.6.3,SNMPv2-SMI::snmpModules,,,,,,
.1.3.6.1.6.3.1,SNMPv2-MIB::snmpMIB,,,,,,The MIB module for SNMP entities. Copyright (C) The Internet Society (2002). This version of this MIB module is part of RFC 3418; see the RFC itself for full legal notices. 
.1.3.6.1.6.3.1.1,SNMPv2-MIB::snmpMIBObjects,,,,,,
.1.3.6.1.6.3.1.1.4,SNMPv2-MIB::snmpTrap,,,,,,
.1.3.6.1.6.3.1.1.4.1,SNMPv2-MIB::snmpTrapOID,OBJECT,accessible-for-notify,,current,,The authoritative identification of the notification currently being sent. This variable occurs as the second varbind in every SNMPv2-Trap-PDU and InformRequest-PDU.
.1.3.6.1.6.3.1.1.4.3,SNMPv2-MIB::snmpTrapEnterprise,OBJECT,accessible-for-notify,,current,,The authoritative identification of the enterprise associated with the trap currently being sent. When an SNMP proxy agent is mapping an RFC1157 Trap-PDU into a SNMPv2-Trap-PDU, this variable occurs as the last varbind.
.1.3.6.1.6.3.1.1.5,SNMPv2-MIB::snmpTraps,,,,,,
.1.3.6.1.6.3.1.1.5.1,SNMPv2-MIB::coldStart,,,,,,A coldStart trap signifies that the SNMP entity, supporting a notification originator application, is reinitializing itself and that its configuration may have been altered.
.1.3.6.1.6.3.1.1.5.2,SNMPv2-MIB::warmStart,,,,,,A warmStart trap signifies that the SNMP entity, supporting a notification originator application, is reinitializing itself such that its configuration is unaltered.
.1.3.6.1.6.3.1.1.5.3,IF-MIB::linkDown,,,,,,A linkDown trap signifies that the SNMP entity, acting in an agent role, has detected that the ifOperStatus object for one of its communication links is about to enter the down state from some other state (but not from the notPresent state). This other state is indicated by the included value of ifOperStatus.
.1.3.6.1.6.3.1.1.5.4,IF-MIB::linkUp,,,,,,A linkUp trap signifies that the SNMP entity, acting in an agent role, has detected that the ifOperStatus object for one of its communication links left the down state and transitioned into some other state (but not into the notPresent state). This other state is indicated by the included value of ifOperStatus.
.1.3.6.1.6.3.1.1.5.5,SNMPv2-MIB::authenticationFailure,,,,,,An authenticationFailure trap signifies that the SNMP entity has received a protocol message that is not properly authenticated. While all implementations of SNMP entities MAY be capable of generating this trap, the snmpEnableAuthenTraps object indicates whether this trap will be generated.
.1.3.6.1.6.3.1.1.6,SNMPv2-MIB::snmpSet,,,,,,
.1.3.6.1.6.3.1.1.6.1,SNMPv2-MIB::snmpSetSerialNo,INTEGER,read-write,,current,,An advisory lock used to allow several cooperating command generator applications to coordinate their use of the SNMP set operation. This object is used for coarse-grain coordination. To achieve fine-grain coordination, one or more similar objects might be defined within each MIB group, as appropriate.
.1.3.6.1.6.3.1.2,SNMPv2-MIB::snmpMIBConformance,,,,,,
.1.3.6.1.6.3.1.2.1,SNMPv2-MIB::snmpMIBCompliances,,,,,,
.1.3.6.1.6.3.1.2.1.2,SNMPv2-MIB::snmpBasicCompliance,,,,,,The compliance statement for SNMPv2 entities which implement the SNMPv2 MIB. This compliance statement is replaced by snmpBasicComplianceRev2.
.1.3.6.1.6.3.1.2.1.3,SNMPv2-MIB::snmpBasicComplianceRev2,,,,,,The compliance statement for SNMP entities which implement this MIB module.
.1.3.6.1.6.3.1.2.2,SNMPv2-MIB::snmpMIBGroups,,,,,,
.1.3.6.1.6.3.1.2.2.5,SNMPv2-MIB::snmpSetGroup,,,,,,A collection of objects which allow several cooperating command generator applications to coordinate their use of the set operation.
.1.3.6.1.6.3.1.2.2.6,SNMPv2-MIB::systemGroup,,,,,,The system group defines objects which are common to all managed systems.
.1.3.6.1.6.3.1.2.2.7,SNMPv2-MIB::snmpBasicNotificationsGroup,,,,,,The basic notifications implemented by an SNMP entity supporting command responder applications.
.1.3.6.1.6.3.1.2.2.8,SNMPv2-MIB::snmpGroup,,,,,,A collection of objects providing basic instrumentation and control of an SNMP entity.
.1.3.6.1.6.3.1.2.2.9,SNMPv2-MIB::snmpCommunityGroup,,,,,,A collection of objects providing basic instrumentation of a SNMP entity which supports community-based authentication.
.1.3.6.1.6.3.1.2.2.10,SNMPv2-MIB::snmpObsoleteGroup,,,,,,A collection of objects from RFC 1213 made obsolete by this MIB module.
.1.3.6.1.6.3.1.2.2.11,SNMPv2-MIB::snmpWarmStartNotificationGroup,,,,,,An additional notification for an SNMP entity supporting command responder applications, if it is able to reinitialize itself such that its configuration is unaltered.
.1.3.6.1.6.3.1.2.2.12,SNMPv2-MIB::snmpNotificationGroup,,,,,,These objects are required for entities which support notification originator applications.
.1.3.6.1.6.3.10,SNMP-FRAMEWORK-MIB::snmpFrameworkMIB,,,,,,The SNMP Management Architecture MIB Copyright (C) The Internet Society (2002). This version of this MIB module is part of RFC 3411; see the RFC itself for full legal notices. 
.1.3.6.1.6.3.10.1,SNMP-FRAMEWORK-MIB::snmpFrameworkAdmin,,,,,,
.1.3.6.1.6.3.10.1.1,SNMP-FRAMEWORK-MIB::snmpAuthProtocols,,,,,,Registration point for standards-track authentication protocols used in SNMP Management Frameworks. 
.1.3.6.1.6.3.10.1.2,SNMP-FRAMEWORK-MIB::snmpPrivProtocols,,,,,,Registration point for standards-track privacy protocols used in SNMP Management Frameworks. 
.1.3.6.1.6.3.10.2,SNMP-FRAMEWORK-MIB::snmpFrameworkMIBObjects,,,,,,
.1.3.6.1.6.3.10.2.1,SNMP-FRAMEWORK-MIB::snmpEngine,,,,,,
.1.3.6.1.6.3.10.2.1.1,SNMP-FRAMEWORK-MIB::snmpEngineID,OCTET,read-only,,current,,An SNMP engine's administratively-unique identifier. This information SHOULD be stored in non-volatile storage so that it remains constant across re-initializations of the SNMP engine. 
.1.3.6.1.6.3.10.2.1.2,SNMP-FRAMEWORK-MIB::snmpEngineBoots,INTEGER,read-only,,current,,The number of times that the SNMP engine has (re-)initialized itself since snmpEngineID was last configured. 
.1.3.6.1.6.3.10.2.1.3,SNMP-FRAMEWORK-MIB::snmpEngineTime,INTEGER,read-only,,current,,The number of seconds since the value of the snmpEngineBoots object last changed. When incrementing this object's value would cause it to exceed its maximum, snmpEngineBoots is incremented as if a re-initialization had occurred, and this object's value consequently reverts to zero. 
.1.3.6.1.6.3.10.2.1.4,SNMP-FRAMEWORK-MIB::snmpEngineMaxMessageSize,INTEGER,read-only,,current,,The maximum length in octets of an SNMP message which this SNMP engine can send or receive and process, determined as the minimum of the maximum message size values supported among all of the transports available to and supported by the engine. 
.1.3.6.1.6.3.10.3,SNMP-FRAMEWORK-MIB::snmpFrameworkMIBConformance,,,,,,
.1.3.6.1.6.3.10.3.1,SNMP-FRAMEWORK-MIB::snmpFrameworkMIBCompliances,,,,,,
.1.3.6.1.6.3.10.3.1.1,SNMP-FRAMEWORK-MIB::snmpFrameworkMIBCompliance,,,,,,The compliance statement for SNMP engines which implement the SNMP Management Framework MIB. 
.1.3.6.1.6.3.10.3.2,SNMP-FRAMEWORK-MIB::snmpFrameworkMIBGroups,,,,,,
.1.3.6.1.6.3.10.3.2.1,SNMP-FRAMEWORK-MIB::snmpEngineGroup,,,,,,A collection of objects for identifying and determining the configuration and current timeliness values of an SNMP engine. 
